From 94ae98433a397dd4695652fc62ca7bc784b08216 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 7 Mar 2013 17:37:59 +0200 Subject: usb: phy: rename all phy drivers to phy-$name-usb.c this will make sure that we have sensible names for all phy drivers. Current situation was already quite bad with too generic names being used. Signed-off-by: Felipe Balbi diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index d10a8b3..5fb4a5d 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -8,24 +8,24 @@ obj-$(CONFIG_USB_PHY) += phy.o # transceiver drivers, keep the list sorted -obj-$(CONFIG_AB8500_USB) += ab8500-usb.o -fsl_usb2_otg-objs := fsl_otg.o otg_fsm.o -obj-$(CONFIG_FSL_USB2_OTG) += fsl_usb2_otg.o -obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o -obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o -obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o -obj-$(CONFIG_OMAP_CONTROL_USB) += omap-control-usb.o -obj-$(CONFIG_OMAP_USB2) += omap-usb2.o -obj-$(CONFIG_OMAP_USB3) += omap-usb3.o -obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o -obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o -obj-$(CONFIG_TWL6030_USB) += twl6030-usb.o -obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o -obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o -obj-$(CONFIG_USB_ISP1301) += isp1301.o -obj-$(CONFIG_USB_MSM_OTG) += msm_otg.o -obj-$(CONFIG_USB_MV_OTG) += mv_otg.o -obj-$(CONFIG_USB_MXS_PHY) += mxs-phy.o -obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o -obj-$(CONFIG_USB_ULPI) += ulpi.o -obj-$(CONFIG_USB_ULPI_VIEWPORT) += ulpi_viewport.o +obj-$(CONFIG_AB8500_USB) += phy-ab8500-usb.o +phy-fsl-usb2-objs := phy-fsl-usb.o phy-fsm-usb.o +obj-$(CONFIG_FSL_USB2_OTG) += phy-fsl-usb2.o +obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301.omap.o +obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o +obj-$(CONFIG_NOP_USB_XCEIV) += phy-nop.o +obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o +obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o +obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o +obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o +obj-$(CONFIG_TWL6030_USB) += phy-twl6030-usb.o +obj-$(CONFIG_USB_EHCI_TEGRA) += phy-tegra-usb.o +obj-$(CONFIG_USB_GPIO_VBUS) += phy-gpio-vbus-usb.o +obj-$(CONFIG_USB_ISP1301) += phy-isp1301.o +obj-$(CONFIG_USB_MSM_OTG) += phy-msm-usb.o +obj-$(CONFIG_USB_MV_OTG) += phy-mv-usb.o +obj-$(CONFIG_USB_MXS_PHY) += phy-mxs-usb.o +obj-$(CONFIG_USB_RCAR_PHY) += phy-rcar-usb.o +obj-$(CONFIG_USB_ULPI) += phy-ulpi.o +obj-$(CONFIG_USB_ULPI_VIEWPORT) += phy-ulpi-viewport.o diff --git a/drivers/usb/phy/ab8500-usb.c b/drivers/usb/phy/ab8500-usb.c deleted file mode 100644 index 2d86f26..0000000 --- a/drivers/usb/phy/ab8500-usb.c +++ /dev/null @@ -1,596 +0,0 @@ -/* - * drivers/usb/otg/ab8500_usb.c - * - * USB transceiver driver for AB8500 chip - * - * Copyright (C) 2010 ST-Ericsson AB - * Mian Yousaf Kaukab - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define AB8500_MAIN_WD_CTRL_REG 0x01 -#define AB8500_USB_LINE_STAT_REG 0x80 -#define AB8500_USB_PHY_CTRL_REG 0x8A - -#define AB8500_BIT_OTG_STAT_ID (1 << 0) -#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) -#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) -#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) -#define AB8500_BIT_WD_CTRL_KICK (1 << 1) - -#define AB8500_V1x_LINK_STAT_WAIT (HZ/10) -#define AB8500_WD_KICK_DELAY_US 100 /* usec */ -#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ -#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */ - -/* Usb line status register */ -enum ab8500_usb_link_status { - USB_LINK_NOT_CONFIGURED = 0, - USB_LINK_STD_HOST_NC, - USB_LINK_STD_HOST_C_NS, - USB_LINK_STD_HOST_C_S, - USB_LINK_HOST_CHG_NM, - USB_LINK_HOST_CHG_HS, - USB_LINK_HOST_CHG_HS_CHIRP, - USB_LINK_DEDICATED_CHG, - USB_LINK_ACA_RID_A, - USB_LINK_ACA_RID_B, - USB_LINK_ACA_RID_C_NM, - USB_LINK_ACA_RID_C_HS, - USB_LINK_ACA_RID_C_HS_CHIRP, - USB_LINK_HM_IDGND, - USB_LINK_RESERVED, - USB_LINK_NOT_VALID_LINK -}; - -struct ab8500_usb { - struct usb_phy phy; - struct device *dev; - int irq_num_id_rise; - int irq_num_id_fall; - int irq_num_vbus_rise; - int irq_num_vbus_fall; - int irq_num_link_status; - unsigned vbus_draw; - struct delayed_work dwork; - struct work_struct phy_dis_work; - unsigned long link_status_wait; - int rev; -}; - -static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x) -{ - return container_of(x, struct ab8500_usb, phy); -} - -static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) -{ - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - AB8500_BIT_WD_CTRL_ENABLE); - - udelay(AB8500_WD_KICK_DELAY_US); - - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - (AB8500_BIT_WD_CTRL_ENABLE - | AB8500_BIT_WD_CTRL_KICK)); - - if (ab->rev > 0x10) /* v1.1 v2.0 */ - udelay(AB8500_WD_V11_DISABLE_DELAY_US); - else /* v1.0 */ - msleep(AB8500_WD_V10_DISABLE_DELAY_MS); - - abx500_set_register_interruptible(ab->dev, - AB8500_SYS_CTRL2_BLOCK, - AB8500_MAIN_WD_CTRL_REG, - 0); -} - -static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host, - bool enable) -{ - u8 ctrl_reg; - abx500_get_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_PHY_CTRL_REG, - &ctrl_reg); - if (sel_host) { - if (enable) - ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN; - else - ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN; - } else { - if (enable) - ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN; - else - ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN; - } - - abx500_set_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_PHY_CTRL_REG, - ctrl_reg); - - /* Needed to enable the phy.*/ - if (enable) - ab8500_usb_wd_workaround(ab); -} - -#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_ctrl(ab, true, true) -#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_ctrl(ab, true, false) -#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_ctrl(ab, false, true) -#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_ctrl(ab, false, false) - -static int ab8500_usb_link_status_update(struct ab8500_usb *ab) -{ - u8 reg; - enum ab8500_usb_link_status lsts; - void *v = NULL; - enum usb_phy_events event; - - abx500_get_register_interruptible(ab->dev, - AB8500_USB, - AB8500_USB_LINE_STAT_REG, - ®); - - lsts = (reg >> 3) & 0x0F; - - switch (lsts) { - case USB_LINK_NOT_CONFIGURED: - case USB_LINK_RESERVED: - case USB_LINK_NOT_VALID_LINK: - /* TODO: Disable regulators. */ - ab8500_usb_host_phy_dis(ab); - ab8500_usb_peri_phy_dis(ab); - ab->phy.state = OTG_STATE_B_IDLE; - ab->phy.otg->default_a = false; - ab->vbus_draw = 0; - event = USB_EVENT_NONE; - break; - - case USB_LINK_STD_HOST_NC: - case USB_LINK_STD_HOST_C_NS: - case USB_LINK_STD_HOST_C_S: - case USB_LINK_HOST_CHG_NM: - case USB_LINK_HOST_CHG_HS: - case USB_LINK_HOST_CHG_HS_CHIRP: - if (ab->phy.otg->gadget) { - /* TODO: Enable regulators. */ - ab8500_usb_peri_phy_en(ab); - v = ab->phy.otg->gadget; - } - event = USB_EVENT_VBUS; - break; - - case USB_LINK_HM_IDGND: - if (ab->phy.otg->host) { - /* TODO: Enable regulators. */ - ab8500_usb_host_phy_en(ab); - v = ab->phy.otg->host; - } - ab->phy.state = OTG_STATE_A_IDLE; - ab->phy.otg->default_a = true; - event = USB_EVENT_ID; - break; - - case USB_LINK_ACA_RID_A: - case USB_LINK_ACA_RID_B: - /* TODO */ - case USB_LINK_ACA_RID_C_NM: - case USB_LINK_ACA_RID_C_HS: - case USB_LINK_ACA_RID_C_HS_CHIRP: - case USB_LINK_DEDICATED_CHG: - /* TODO: vbus_draw */ - event = USB_EVENT_CHARGER; - break; - } - - atomic_notifier_call_chain(&ab->phy.notifier, event, v); - - return 0; -} - -static void ab8500_usb_delayed_work(struct work_struct *work) -{ - struct ab8500_usb *ab = container_of(work, struct ab8500_usb, - dwork.work); - - ab8500_usb_link_status_update(ab); -} - -static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - /* Wait for link status to become stable. */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - - return IRQ_HANDLED; -} - -static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - /* Link status will not be updated till phy is disabled. */ - ab8500_usb_peri_phy_dis(ab); - - /* Wait for link status to become stable. */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - - return IRQ_HANDLED; -} - -static irqreturn_t ab8500_usb_v20_irq(int irq, void *data) -{ - struct ab8500_usb *ab = (struct ab8500_usb *) data; - - ab8500_usb_link_status_update(ab); - - return IRQ_HANDLED; -} - -static void ab8500_usb_phy_disable_work(struct work_struct *work) -{ - struct ab8500_usb *ab = container_of(work, struct ab8500_usb, - phy_dis_work); - - if (!ab->phy.otg->host) - ab8500_usb_host_phy_dis(ab); - - if (!ab->phy.otg->gadget) - ab8500_usb_peri_phy_dis(ab); -} - -static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA) -{ - struct ab8500_usb *ab; - - if (!phy) - return -ENODEV; - - ab = phy_to_ab(phy); - - ab->vbus_draw = mA; - - if (mA) - atomic_notifier_call_chain(&ab->phy.notifier, - USB_EVENT_ENUMERATED, ab->phy.otg->gadget); - return 0; -} - -/* TODO: Implement some way for charging or other drivers to read - * ab->vbus_draw. - */ - -static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend) -{ - /* TODO */ - return 0; -} - -static int ab8500_usb_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - struct ab8500_usb *ab; - - if (!otg) - return -ENODEV; - - ab = phy_to_ab(otg->phy); - - /* Some drivers call this function in atomic context. - * Do not update ab8500 registers directly till this - * is fixed. - */ - - if (!gadget) { - /* TODO: Disable regulators. */ - otg->gadget = NULL; - schedule_work(&ab->phy_dis_work); - } else { - otg->gadget = gadget; - otg->phy->state = OTG_STATE_B_IDLE; - - /* Phy will not be enabled if cable is already - * plugged-in. Schedule to enable phy. - * Use same delay to avoid any race condition. - */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - } - - return 0; -} - -static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct ab8500_usb *ab; - - if (!otg) - return -ENODEV; - - ab = phy_to_ab(otg->phy); - - /* Some drivers call this function in atomic context. - * Do not update ab8500 registers directly till this - * is fixed. - */ - - if (!host) { - /* TODO: Disable regulators. */ - otg->host = NULL; - schedule_work(&ab->phy_dis_work); - } else { - otg->host = host; - /* Phy will not be enabled if cable is already - * plugged-in. Schedule to enable phy. - * Use same delay to avoid any race condition. - */ - schedule_delayed_work(&ab->dwork, ab->link_status_wait); - } - - return 0; -} - -static void ab8500_usb_irq_free(struct ab8500_usb *ab) -{ - if (ab->rev < 0x20) { - free_irq(ab->irq_num_id_rise, ab); - free_irq(ab->irq_num_id_fall, ab); - free_irq(ab->irq_num_vbus_rise, ab); - free_irq(ab->irq_num_vbus_fall, ab); - } else { - free_irq(ab->irq_num_link_status, ab); - } -} - -static int ab8500_usb_v1x_res_setup(struct platform_device *pdev, - struct ab8500_usb *ab) -{ - int err; - - ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R"); - if (ab->irq_num_id_rise < 0) { - dev_err(&pdev->dev, "ID rise irq not found\n"); - return ab->irq_num_id_rise; - } - err = request_threaded_irq(ab->irq_num_id_rise, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-id-rise", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for ID rise irq\n"); - goto fail0; - } - - ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); - if (ab->irq_num_id_fall < 0) { - dev_err(&pdev->dev, "ID fall irq not found\n"); - return ab->irq_num_id_fall; - } - err = request_threaded_irq(ab->irq_num_id_fall, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-id-fall", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for ID fall irq\n"); - goto fail1; - } - - ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R"); - if (ab->irq_num_vbus_rise < 0) { - dev_err(&pdev->dev, "VBUS rise irq not found\n"); - return ab->irq_num_vbus_rise; - } - err = request_threaded_irq(ab->irq_num_vbus_rise, NULL, - ab8500_usb_v1x_common_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-vbus-rise", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for Vbus rise irq\n"); - goto fail2; - } - - ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F"); - if (ab->irq_num_vbus_fall < 0) { - dev_err(&pdev->dev, "VBUS fall irq not found\n"); - return ab->irq_num_vbus_fall; - } - err = request_threaded_irq(ab->irq_num_vbus_fall, NULL, - ab8500_usb_v1x_vbus_fall_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-vbus-fall", ab); - if (err < 0) { - dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); - goto fail3; - } - - return 0; -fail3: - free_irq(ab->irq_num_vbus_rise, ab); -fail2: - free_irq(ab->irq_num_id_fall, ab); -fail1: - free_irq(ab->irq_num_id_rise, ab); -fail0: - return err; -} - -static int ab8500_usb_v2_res_setup(struct platform_device *pdev, - struct ab8500_usb *ab) -{ - int err; - - ab->irq_num_link_status = platform_get_irq_byname(pdev, - "USB_LINK_STATUS"); - if (ab->irq_num_link_status < 0) { - dev_err(&pdev->dev, "Link status irq not found\n"); - return ab->irq_num_link_status; - } - - err = request_threaded_irq(ab->irq_num_link_status, NULL, - ab8500_usb_v20_irq, - IRQF_NO_SUSPEND | IRQF_SHARED, - "usb-link-status", ab); - if (err < 0) { - dev_err(ab->dev, - "request_irq failed for link status irq\n"); - return err; - } - - return 0; -} - -static int ab8500_usb_probe(struct platform_device *pdev) -{ - struct ab8500_usb *ab; - struct usb_otg *otg; - int err; - int rev; - - rev = abx500_get_chip_id(&pdev->dev); - if (rev < 0) { - dev_err(&pdev->dev, "Chip id read failed\n"); - return rev; - } else if (rev < 0x10) { - dev_err(&pdev->dev, "Unsupported AB8500 chip\n"); - return -ENODEV; - } - - ab = kzalloc(sizeof *ab, GFP_KERNEL); - if (!ab) - return -ENOMEM; - - otg = kzalloc(sizeof *otg, GFP_KERNEL); - if (!otg) { - kfree(ab); - return -ENOMEM; - } - - ab->dev = &pdev->dev; - ab->rev = rev; - ab->phy.dev = ab->dev; - ab->phy.otg = otg; - ab->phy.label = "ab8500"; - ab->phy.set_suspend = ab8500_usb_set_suspend; - ab->phy.set_power = ab8500_usb_set_power; - ab->phy.state = OTG_STATE_UNDEFINED; - - otg->phy = &ab->phy; - otg->set_host = ab8500_usb_set_host; - otg->set_peripheral = ab8500_usb_set_peripheral; - - platform_set_drvdata(pdev, ab); - - ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier); - - /* v1: Wait for link status to become stable. - * all: Updates form set_host and set_peripheral as they are atomic. - */ - INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work); - - /* all: Disable phy when called from set_host and set_peripheral */ - INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); - - if (ab->rev < 0x20) { - err = ab8500_usb_v1x_res_setup(pdev, ab); - ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT; - } else { - err = ab8500_usb_v2_res_setup(pdev, ab); - } - - if (err < 0) - goto fail0; - - err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2); - if (err) { - dev_err(&pdev->dev, "Can't register transceiver\n"); - goto fail1; - } - - dev_info(&pdev->dev, "AB8500 usb driver initialized\n"); - - return 0; -fail1: - ab8500_usb_irq_free(ab); -fail0: - kfree(otg); - kfree(ab); - return err; -} - -static int ab8500_usb_remove(struct platform_device *pdev) -{ - struct ab8500_usb *ab = platform_get_drvdata(pdev); - - ab8500_usb_irq_free(ab); - - cancel_delayed_work_sync(&ab->dwork); - - cancel_work_sync(&ab->phy_dis_work); - - usb_remove_phy(&ab->phy); - - ab8500_usb_host_phy_dis(ab); - ab8500_usb_peri_phy_dis(ab); - - platform_set_drvdata(pdev, NULL); - - kfree(ab->phy.otg); - kfree(ab); - - return 0; -} - -static struct platform_driver ab8500_usb_driver = { - .probe = ab8500_usb_probe, - .remove = ab8500_usb_remove, - .driver = { - .name = "ab8500-usb", - .owner = THIS_MODULE, - }, -}; - -static int __init ab8500_usb_init(void) -{ - return platform_driver_register(&ab8500_usb_driver); -} -subsys_initcall(ab8500_usb_init); - -static void __exit ab8500_usb_exit(void) -{ - platform_driver_unregister(&ab8500_usb_driver); -} -module_exit(ab8500_usb_exit); - -MODULE_ALIAS("platform:ab8500_usb"); -MODULE_AUTHOR("ST-Ericsson AB"); -MODULE_DESCRIPTION("AB8500 usb transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/fsl_otg.c b/drivers/usb/phy/fsl_otg.c deleted file mode 100644 index 72a2a00..0000000 --- a/drivers/usb/phy/fsl_otg.c +++ /dev/null @@ -1,1173 +0,0 @@ -/* - * Copyright (C) 2007,2008 Freescale semiconductor, Inc. - * - * Author: Li Yang - * Jerry Huang - * - * Initialization based on code from Shlomi Gridish. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include "fsl_otg.h" - -#define DRIVER_VERSION "Rev. 1.55" -#define DRIVER_AUTHOR "Jerry Huang/Li Yang" -#define DRIVER_DESC "Freescale USB OTG Transceiver Driver" -#define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION - -static const char driver_name[] = "fsl-usb2-otg"; - -const pm_message_t otg_suspend_state = { - .event = 1, -}; - -#define HA_DATA_PULSE - -static struct usb_dr_mmap *usb_dr_regs; -static struct fsl_otg *fsl_otg_dev; -static int srp_wait_done; - -/* FSM timers */ -struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr, - *b_ase0_brst_tmr, *b_se0_srp_tmr; - -/* Driver specific timers */ -struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr, - *b_srp_wait_tmr, *a_wait_enum_tmr; - -static struct list_head active_timers; - -static struct fsl_otg_config fsl_otg_initdata = { - .otg_port = 1, -}; - -#ifdef CONFIG_PPC32 -static u32 _fsl_readl_be(const unsigned __iomem *p) -{ - return in_be32(p); -} - -static u32 _fsl_readl_le(const unsigned __iomem *p) -{ - return in_le32(p); -} - -static void _fsl_writel_be(u32 v, unsigned __iomem *p) -{ - out_be32(p, v); -} - -static void _fsl_writel_le(u32 v, unsigned __iomem *p) -{ - out_le32(p, v); -} - -static u32 (*_fsl_readl)(const unsigned __iomem *p); -static void (*_fsl_writel)(u32 v, unsigned __iomem *p); - -#define fsl_readl(p) (*_fsl_readl)((p)) -#define fsl_writel(v, p) (*_fsl_writel)((v), (p)) - -#else -#define fsl_readl(addr) readl(addr) -#define fsl_writel(val, addr) writel(val, addr) -#endif /* CONFIG_PPC32 */ - -/* Routines to access transceiver ULPI registers */ -u8 view_ulpi(u8 addr) -{ - u32 temp; - - temp = 0x40000000 | (addr << 16); - fsl_writel(temp, &usb_dr_regs->ulpiview); - udelay(1000); - while (temp & 0x40) - temp = fsl_readl(&usb_dr_regs->ulpiview); - return (le32_to_cpu(temp) & 0x0000ff00) >> 8; -} - -int write_ulpi(u8 addr, u8 data) -{ - u32 temp; - - temp = 0x60000000 | (addr << 16) | data; - fsl_writel(temp, &usb_dr_regs->ulpiview); - return 0; -} - -/* -------------------------------------------------------------*/ -/* Operations that will be called from OTG Finite State Machine */ - -/* Charge vbus for vbus pulsing in SRP */ -void fsl_otg_chrg_vbus(int on) -{ - u32 tmp; - - tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; - - if (on) - /* stop discharging, start charging */ - tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) | - OTGSC_CTRL_VBUS_CHARGE; - else - /* stop charging */ - tmp &= ~OTGSC_CTRL_VBUS_CHARGE; - - fsl_writel(tmp, &usb_dr_regs->otgsc); -} - -/* Discharge vbus through a resistor to ground */ -void fsl_otg_dischrg_vbus(int on) -{ - u32 tmp; - - tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; - - if (on) - /* stop charging, start discharging */ - tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) | - OTGSC_CTRL_VBUS_DISCHARGE; - else - /* stop discharging */ - tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; - - fsl_writel(tmp, &usb_dr_regs->otgsc); -} - -/* A-device driver vbus, controlled through PP bit in PORTSC */ -void fsl_otg_drv_vbus(int on) -{ - u32 tmp; - - if (on) { - tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS; - fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc); - } else { - tmp = fsl_readl(&usb_dr_regs->portsc) & - ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER; - fsl_writel(tmp, &usb_dr_regs->portsc); - } -} - -/* - * Pull-up D+, signalling connect by periperal. Also used in - * data-line pulsing in SRP - */ -void fsl_otg_loc_conn(int on) -{ - u32 tmp; - - tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; - - if (on) - tmp |= OTGSC_CTRL_DATA_PULSING; - else - tmp &= ~OTGSC_CTRL_DATA_PULSING; - - fsl_writel(tmp, &usb_dr_regs->otgsc); -} - -/* - * Generate SOF by host. This is controlled through suspend/resume the - * port. In host mode, controller will automatically send SOF. - * Suspend will block the data on the port. - */ -void fsl_otg_loc_sof(int on) -{ - u32 tmp; - - tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS; - if (on) - tmp |= PORTSC_PORT_FORCE_RESUME; - else - tmp |= PORTSC_PORT_SUSPEND; - - fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc); - -} - -/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ -void fsl_otg_start_pulse(void) -{ - u32 tmp; - - srp_wait_done = 0; -#ifdef HA_DATA_PULSE - tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; - tmp |= OTGSC_HA_DATA_PULSE; - fsl_writel(tmp, &usb_dr_regs->otgsc); -#else - fsl_otg_loc_conn(1); -#endif - - fsl_otg_add_timer(b_data_pulse_tmr); -} - -void b_data_pulse_end(unsigned long foo) -{ -#ifdef HA_DATA_PULSE -#else - fsl_otg_loc_conn(0); -#endif - - /* Do VBUS pulse after data pulse */ - fsl_otg_pulse_vbus(); -} - -void fsl_otg_pulse_vbus(void) -{ - srp_wait_done = 0; - fsl_otg_chrg_vbus(1); - /* start the timer to end vbus charge */ - fsl_otg_add_timer(b_vbus_pulse_tmr); -} - -void b_vbus_pulse_end(unsigned long foo) -{ - fsl_otg_chrg_vbus(0); - - /* - * As USB3300 using the same a_sess_vld and b_sess_vld voltage - * we need to discharge the bus for a while to distinguish - * residual voltage of vbus pulsing and A device pull up - */ - fsl_otg_dischrg_vbus(1); - fsl_otg_add_timer(b_srp_wait_tmr); -} - -void b_srp_end(unsigned long foo) -{ - fsl_otg_dischrg_vbus(0); - srp_wait_done = 1; - - if ((fsl_otg_dev->phy.state == OTG_STATE_B_SRP_INIT) && - fsl_otg_dev->fsm.b_sess_vld) - fsl_otg_dev->fsm.b_srp_done = 1; -} - -/* - * Workaround for a_host suspending too fast. When a_bus_req=0, - * a_host will start by SRP. It needs to set b_hnp_enable before - * actually suspending to start HNP - */ -void a_wait_enum(unsigned long foo) -{ - VDBG("a_wait_enum timeout\n"); - if (!fsl_otg_dev->phy.otg->host->b_hnp_enable) - fsl_otg_add_timer(a_wait_enum_tmr); - else - otg_statemachine(&fsl_otg_dev->fsm); -} - -/* The timeout callback function to set time out bit */ -void set_tmout(unsigned long indicator) -{ - *(int *)indicator = 1; -} - -/* Initialize timers */ -int fsl_otg_init_timers(struct otg_fsm *fsm) -{ - /* FSM used timers */ - a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, - (unsigned long)&fsm->a_wait_vrise_tmout); - if (!a_wait_vrise_tmr) - return -ENOMEM; - - a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON, - (unsigned long)&fsm->a_wait_bcon_tmout); - if (!a_wait_bcon_tmr) - return -ENOMEM; - - a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, - (unsigned long)&fsm->a_aidl_bdis_tmout); - if (!a_aidl_bdis_tmr) - return -ENOMEM; - - b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST, - (unsigned long)&fsm->b_ase0_brst_tmout); - if (!b_ase0_brst_tmr) - return -ENOMEM; - - b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, - (unsigned long)&fsm->b_se0_srp); - if (!b_se0_srp_tmr) - return -ENOMEM; - - b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL, - (unsigned long)&fsm->b_srp_done); - if (!b_srp_fail_tmr) - return -ENOMEM; - - a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10, - (unsigned long)&fsm); - if (!a_wait_enum_tmr) - return -ENOMEM; - - /* device driver used timers */ - b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0); - if (!b_srp_wait_tmr) - return -ENOMEM; - - b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end, - TB_DATA_PLS, 0); - if (!b_data_pulse_tmr) - return -ENOMEM; - - b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end, - TB_VBUS_PLS, 0); - if (!b_vbus_pulse_tmr) - return -ENOMEM; - - return 0; -} - -/* Uninitialize timers */ -void fsl_otg_uninit_timers(void) -{ - /* FSM used timers */ - kfree(a_wait_vrise_tmr); - kfree(a_wait_bcon_tmr); - kfree(a_aidl_bdis_tmr); - kfree(b_ase0_brst_tmr); - kfree(b_se0_srp_tmr); - kfree(b_srp_fail_tmr); - kfree(a_wait_enum_tmr); - - /* device driver used timers */ - kfree(b_srp_wait_tmr); - kfree(b_data_pulse_tmr); - kfree(b_vbus_pulse_tmr); -} - -/* Add timer to timer list */ -void fsl_otg_add_timer(void *gtimer) -{ - struct fsl_otg_timer *timer = gtimer; - struct fsl_otg_timer *tmp_timer; - - /* - * Check if the timer is already in the active list, - * if so update timer count - */ - list_for_each_entry(tmp_timer, &active_timers, list) - if (tmp_timer == timer) { - timer->count = timer->expires; - return; - } - timer->count = timer->expires; - list_add_tail(&timer->list, &active_timers); -} - -/* Remove timer from the timer list; clear timeout status */ -void fsl_otg_del_timer(void *gtimer) -{ - struct fsl_otg_timer *timer = gtimer; - struct fsl_otg_timer *tmp_timer, *del_tmp; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) - if (tmp_timer == timer) - list_del(&timer->list); -} - -/* - * Reduce timer count by 1, and find timeout conditions. - * Called by fsl_otg 1ms timer interrupt - */ -int fsl_otg_tick_timer(void) -{ - struct fsl_otg_timer *tmp_timer, *del_tmp; - int expired = 0; - - list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { - tmp_timer->count--; - /* check if timer expires */ - if (!tmp_timer->count) { - list_del(&tmp_timer->list); - tmp_timer->function(tmp_timer->data); - expired = 1; - } - } - - return expired; -} - -/* Reset controller, not reset the bus */ -void otg_reset_controller(void) -{ - u32 command; - - command = fsl_readl(&usb_dr_regs->usbcmd); - command |= (1 << 1); - fsl_writel(command, &usb_dr_regs->usbcmd); - while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1)) - ; -} - -/* Call suspend/resume routines in host driver */ -int fsl_otg_start_host(struct otg_fsm *fsm, int on) -{ - struct usb_otg *otg = fsm->otg; - struct device *dev; - struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); - u32 retval = 0; - - if (!otg->host) - return -ENODEV; - dev = otg->host->controller; - - /* - * Update a_vbus_vld state as a_vbus_vld int is disabled - * in device mode - */ - fsm->a_vbus_vld = - !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID); - if (on) { - /* start fsl usb host controller */ - if (otg_dev->host_working) - goto end; - else { - otg_reset_controller(); - VDBG("host on......\n"); - if (dev->driver->pm && dev->driver->pm->resume) { - retval = dev->driver->pm->resume(dev); - if (fsm->id) { - /* default-b */ - fsl_otg_drv_vbus(1); - /* - * Workaround: b_host can't driver - * vbus, but PP in PORTSC needs to - * be 1 for host to work. - * So we set drv_vbus bit in - * transceiver to 0 thru ULPI. - */ - write_ulpi(0x0c, 0x20); - } - } - - otg_dev->host_working = 1; - } - } else { - /* stop fsl usb host controller */ - if (!otg_dev->host_working) - goto end; - else { - VDBG("host off......\n"); - if (dev && dev->driver) { - if (dev->driver->pm && dev->driver->pm->suspend) - retval = dev->driver->pm->suspend(dev); - if (fsm->id) - /* default-b */ - fsl_otg_drv_vbus(0); - } - otg_dev->host_working = 0; - } - } -end: - return retval; -} - -/* - * Call suspend and resume function in udc driver - * to stop and start udc driver. - */ -int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) -{ - struct usb_otg *otg = fsm->otg; - struct device *dev; - - if (!otg->gadget || !otg->gadget->dev.parent) - return -ENODEV; - - VDBG("gadget %s\n", on ? "on" : "off"); - dev = otg->gadget->dev.parent; - - if (on) { - if (dev->driver->resume) - dev->driver->resume(dev); - } else { - if (dev->driver->suspend) - dev->driver->suspend(dev, otg_suspend_state); - } - - return 0; -} - -/* - * Called by initialization code of host driver. Register host controller - * to the OTG. Suspend host for OTG role detection. - */ -static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct fsl_otg *otg_dev; - - if (!otg) - return -ENODEV; - - otg_dev = container_of(otg->phy, struct fsl_otg, phy); - if (otg_dev != fsl_otg_dev) - return -ENODEV; - - otg->host = host; - - otg_dev->fsm.a_bus_drop = 0; - otg_dev->fsm.a_bus_req = 1; - - if (host) { - VDBG("host off......\n"); - - otg->host->otg_port = fsl_otg_initdata.otg_port; - otg->host->is_b_host = otg_dev->fsm.id; - /* - * must leave time for khubd to finish its thing - * before yanking the host driver out from under it, - * so suspend the host after a short delay. - */ - otg_dev->host_working = 1; - schedule_delayed_work(&otg_dev->otg_event, 100); - return 0; - } else { - /* host driver going away */ - if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) & - OTGSC_STS_USB_ID)) { - /* Mini-A cable connected */ - struct otg_fsm *fsm = &otg_dev->fsm; - - otg->phy->state = OTG_STATE_UNDEFINED; - fsm->protocol = PROTO_UNDEF; - } - } - - otg_dev->host_working = 0; - - otg_statemachine(&otg_dev->fsm); - - return 0; -} - -/* Called by initialization code of udc. Register udc to OTG. */ -static int fsl_otg_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - struct fsl_otg *otg_dev; - - if (!otg) - return -ENODEV; - - otg_dev = container_of(otg->phy, struct fsl_otg, phy); - VDBG("otg_dev 0x%x\n", (int)otg_dev); - VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev); - if (otg_dev != fsl_otg_dev) - return -ENODEV; - - if (!gadget) { - if (!otg->default_a) - otg->gadget->ops->vbus_draw(otg->gadget, 0); - usb_gadget_vbus_disconnect(otg->gadget); - otg->gadget = 0; - otg_dev->fsm.b_bus_req = 0; - otg_statemachine(&otg_dev->fsm); - return 0; - } - - otg->gadget = gadget; - otg->gadget->is_a_peripheral = !otg_dev->fsm.id; - - otg_dev->fsm.b_bus_req = 1; - - /* start the gadget right away if the ID pin says Mini-B */ - DBG("ID pin=%d\n", otg_dev->fsm.id); - if (otg_dev->fsm.id == 1) { - fsl_otg_start_host(&otg_dev->fsm, 0); - otg_drv_vbus(&otg_dev->fsm, 0); - fsl_otg_start_gadget(&otg_dev->fsm, 1); - } - - return 0; -} - -/* Set OTG port power, only for B-device */ -static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA) -{ - if (!fsl_otg_dev) - return -ENODEV; - if (phy->state == OTG_STATE_B_PERIPHERAL) - pr_info("FSL OTG: Draw %d mA\n", mA); - - return 0; -} - -/* - * Delayed pin detect interrupt processing. - * - * When the Mini-A cable is disconnected from the board, - * the pin-detect interrupt happens before the disconnect - * interrupts for the connected device(s). In order to - * process the disconnect interrupt(s) prior to switching - * roles, the pin-detect interrupts are delayed, and handled - * by this routine. - */ -static void fsl_otg_event(struct work_struct *work) -{ - struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work); - struct otg_fsm *fsm = &og->fsm; - - if (fsm->id) { /* switch to gadget */ - fsl_otg_start_host(fsm, 0); - otg_drv_vbus(fsm, 0); - fsl_otg_start_gadget(fsm, 1); - } -} - -/* B-device start SRP */ -static int fsl_otg_start_srp(struct usb_otg *otg) -{ - struct fsl_otg *otg_dev; - - if (!otg || otg->phy->state != OTG_STATE_B_IDLE) - return -ENODEV; - - otg_dev = container_of(otg->phy, struct fsl_otg, phy); - if (otg_dev != fsl_otg_dev) - return -ENODEV; - - otg_dev->fsm.b_bus_req = 1; - otg_statemachine(&otg_dev->fsm); - - return 0; -} - -/* A_host suspend will call this function to start hnp */ -static int fsl_otg_start_hnp(struct usb_otg *otg) -{ - struct fsl_otg *otg_dev; - - if (!otg) - return -ENODEV; - - otg_dev = container_of(otg->phy, struct fsl_otg, phy); - if (otg_dev != fsl_otg_dev) - return -ENODEV; - - DBG("start_hnp...n"); - - /* clear a_bus_req to enter a_suspend state */ - otg_dev->fsm.a_bus_req = 0; - otg_statemachine(&otg_dev->fsm); - - return 0; -} - -/* - * Interrupt handler. OTG/host/peripheral share the same int line. - * OTG driver clears OTGSC interrupts and leaves USB interrupts - * intact. It needs to have knowledge of some USB interrupts - * such as port change. - */ -irqreturn_t fsl_otg_isr(int irq, void *dev_id) -{ - struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm; - struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg; - u32 otg_int_src, otg_sc; - - otg_sc = fsl_readl(&usb_dr_regs->otgsc); - otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8); - - /* Only clear otg interrupts */ - fsl_writel(otg_sc, &usb_dr_regs->otgsc); - - /*FIXME: ID change not generate when init to 0 */ - fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; - otg->default_a = (fsm->id == 0); - - /* process OTG interrupts */ - if (otg_int_src) { - if (otg_int_src & OTGSC_INTSTS_USB_ID) { - fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; - otg->default_a = (fsm->id == 0); - /* clear conn information */ - if (fsm->id) - fsm->b_conn = 0; - else - fsm->a_conn = 0; - - if (otg->host) - otg->host->is_b_host = fsm->id; - if (otg->gadget) - otg->gadget->is_a_peripheral = !fsm->id; - VDBG("ID int (ID is %d)\n", fsm->id); - - if (fsm->id) { /* switch to gadget */ - schedule_delayed_work( - &((struct fsl_otg *)dev_id)->otg_event, - 100); - } else { /* switch to host */ - cancel_delayed_work(& - ((struct fsl_otg *)dev_id)-> - otg_event); - fsl_otg_start_gadget(fsm, 0); - otg_drv_vbus(fsm, 1); - fsl_otg_start_host(fsm, 1); - } - return IRQ_HANDLED; - } - } - return IRQ_NONE; -} - -static struct otg_fsm_ops fsl_otg_ops = { - .chrg_vbus = fsl_otg_chrg_vbus, - .drv_vbus = fsl_otg_drv_vbus, - .loc_conn = fsl_otg_loc_conn, - .loc_sof = fsl_otg_loc_sof, - .start_pulse = fsl_otg_start_pulse, - - .add_timer = fsl_otg_add_timer, - .del_timer = fsl_otg_del_timer, - - .start_host = fsl_otg_start_host, - .start_gadget = fsl_otg_start_gadget, -}; - -/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */ -static int fsl_otg_conf(struct platform_device *pdev) -{ - struct fsl_otg *fsl_otg_tc; - int status; - - if (fsl_otg_dev) - return 0; - - /* allocate space to fsl otg device */ - fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL); - if (!fsl_otg_tc) - return -ENOMEM; - - fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); - if (!fsl_otg_tc->phy.otg) { - kfree(fsl_otg_tc); - return -ENOMEM; - } - - INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event); - - INIT_LIST_HEAD(&active_timers); - status = fsl_otg_init_timers(&fsl_otg_tc->fsm); - if (status) { - pr_info("Couldn't init OTG timers\n"); - goto err; - } - spin_lock_init(&fsl_otg_tc->fsm.lock); - - /* Set OTG state machine operations */ - fsl_otg_tc->fsm.ops = &fsl_otg_ops; - - /* initialize the otg structure */ - fsl_otg_tc->phy.label = DRIVER_DESC; - fsl_otg_tc->phy.set_power = fsl_otg_set_power; - - fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy; - fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host; - fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral; - fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp; - fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp; - - fsl_otg_dev = fsl_otg_tc; - - /* Store the otg transceiver */ - status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2); - if (status) { - pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n"); - goto err; - } - - return 0; -err: - fsl_otg_uninit_timers(); - kfree(fsl_otg_tc->phy.otg); - kfree(fsl_otg_tc); - return status; -} - -/* OTG Initialization */ -int usb_otg_start(struct platform_device *pdev) -{ - struct fsl_otg *p_otg; - struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2); - struct otg_fsm *fsm; - int status; - struct resource *res; - u32 temp; - struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - - p_otg = container_of(otg_trans, struct fsl_otg, phy); - fsm = &p_otg->fsm; - - /* Initialize the state machine structure with default values */ - SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED); - fsm->otg = p_otg->phy.otg; - - /* We don't require predefined MEM/IRQ resource index */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENXIO; - - /* We don't request_mem_region here to enable resource sharing - * with host/device */ - - usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap)); - p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs; - pdata->regs = (void *)usb_dr_regs; - - if (pdata->init && pdata->init(pdev) != 0) - return -EINVAL; - - if (pdata->big_endian_mmio) { - _fsl_readl = _fsl_readl_be; - _fsl_writel = _fsl_writel_be; - } else { - _fsl_readl = _fsl_readl_le; - _fsl_writel = _fsl_writel_le; - } - - /* request irq */ - p_otg->irq = platform_get_irq(pdev, 0); - status = request_irq(p_otg->irq, fsl_otg_isr, - IRQF_SHARED, driver_name, p_otg); - if (status) { - dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n", - p_otg->irq, status); - iounmap(p_otg->dr_mem_map); - kfree(p_otg->phy.otg); - kfree(p_otg); - return status; - } - - /* stop the controller */ - temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); - temp &= ~USB_CMD_RUN_STOP; - fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); - - /* reset the controller */ - temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); - temp |= USB_CMD_CTRL_RESET; - fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); - - /* wait reset completed */ - while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET) - ; - - /* configure the VBUSHS as IDLE(both host and device) */ - temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0); - fsl_writel(temp, &p_otg->dr_mem_map->usbmode); - - /* configure PHY interface */ - temp = fsl_readl(&p_otg->dr_mem_map->portsc); - temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW); - switch (pdata->phy_mode) { - case FSL_USB2_PHY_ULPI: - temp |= PORTSC_PTS_ULPI; - break; - case FSL_USB2_PHY_UTMI_WIDE: - temp |= PORTSC_PTW_16BIT; - /* fall through */ - case FSL_USB2_PHY_UTMI: - temp |= PORTSC_PTS_UTMI; - /* fall through */ - default: - break; - } - fsl_writel(temp, &p_otg->dr_mem_map->portsc); - - if (pdata->have_sysif_regs) { - /* configure control enable IO output, big endian register */ - temp = __raw_readl(&p_otg->dr_mem_map->control); - temp |= USB_CTRL_IOENB; - __raw_writel(temp, &p_otg->dr_mem_map->control); - } - - /* disable all interrupt and clear all OTGSC status */ - temp = fsl_readl(&p_otg->dr_mem_map->otgsc); - temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; - temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE; - fsl_writel(temp, &p_otg->dr_mem_map->otgsc); - - /* - * The identification (id) input is FALSE when a Mini-A plug is inserted - * in the devices Mini-AB receptacle. Otherwise, this input is TRUE. - * Also: record initial state of ID pin - */ - if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) { - p_otg->phy.state = OTG_STATE_UNDEFINED; - p_otg->fsm.id = 1; - } else { - p_otg->phy.state = OTG_STATE_A_IDLE; - p_otg->fsm.id = 0; - } - - DBG("initial ID pin=%d\n", p_otg->fsm.id); - - /* enable OTG ID pin interrupt */ - temp = fsl_readl(&p_otg->dr_mem_map->otgsc); - temp |= OTGSC_INTR_USB_ID_EN; - temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN); - fsl_writel(temp, &p_otg->dr_mem_map->otgsc); - - return 0; -} - -/* - * state file in sysfs - */ -static int show_fsl_usb2_otg_state(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct otg_fsm *fsm = &fsl_otg_dev->fsm; - char *next = buf; - unsigned size = PAGE_SIZE; - unsigned long flags; - int t; - - spin_lock_irqsave(&fsm->lock, flags); - - /* basic driver infomation */ - t = scnprintf(next, size, - DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n", - DRIVER_VERSION); - size -= t; - next += t; - - /* Registers */ - t = scnprintf(next, size, - "OTGSC: 0x%08x\n" - "PORTSC: 0x%08x\n" - "USBMODE: 0x%08x\n" - "USBCMD: 0x%08x\n" - "USBSTS: 0x%08x\n" - "USBINTR: 0x%08x\n", - fsl_readl(&usb_dr_regs->otgsc), - fsl_readl(&usb_dr_regs->portsc), - fsl_readl(&usb_dr_regs->usbmode), - fsl_readl(&usb_dr_regs->usbcmd), - fsl_readl(&usb_dr_regs->usbsts), - fsl_readl(&usb_dr_regs->usbintr)); - size -= t; - next += t; - - /* State */ - t = scnprintf(next, size, - "OTG state: %s\n\n", - usb_otg_state_string(fsl_otg_dev->phy.state)); - size -= t; - next += t; - - /* State Machine Variables */ - t = scnprintf(next, size, - "a_bus_req: %d\n" - "b_bus_req: %d\n" - "a_bus_resume: %d\n" - "a_bus_suspend: %d\n" - "a_conn: %d\n" - "a_sess_vld: %d\n" - "a_srp_det: %d\n" - "a_vbus_vld: %d\n" - "b_bus_resume: %d\n" - "b_bus_suspend: %d\n" - "b_conn: %d\n" - "b_se0_srp: %d\n" - "b_sess_end: %d\n" - "b_sess_vld: %d\n" - "id: %d\n", - fsm->a_bus_req, - fsm->b_bus_req, - fsm->a_bus_resume, - fsm->a_bus_suspend, - fsm->a_conn, - fsm->a_sess_vld, - fsm->a_srp_det, - fsm->a_vbus_vld, - fsm->b_bus_resume, - fsm->b_bus_suspend, - fsm->b_conn, - fsm->b_se0_srp, - fsm->b_sess_end, - fsm->b_sess_vld, - fsm->id); - size -= t; - next += t; - - spin_unlock_irqrestore(&fsm->lock, flags); - - return PAGE_SIZE - size; -} - -static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); - - -/* Char driver interface to control some OTG input */ - -/* - * Handle some ioctl command, such as get otg - * status and set host suspend - */ -static long fsl_otg_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - u32 retval = 0; - - switch (cmd) { - case GET_OTG_STATUS: - retval = fsl_otg_dev->host_working; - break; - - case SET_A_SUSPEND_REQ: - fsl_otg_dev->fsm.a_suspend_req = arg; - break; - - case SET_A_BUS_DROP: - fsl_otg_dev->fsm.a_bus_drop = arg; - break; - - case SET_A_BUS_REQ: - fsl_otg_dev->fsm.a_bus_req = arg; - break; - - case SET_B_BUS_REQ: - fsl_otg_dev->fsm.b_bus_req = arg; - break; - - default: - break; - } - - otg_statemachine(&fsl_otg_dev->fsm); - - return retval; -} - -static int fsl_otg_open(struct inode *inode, struct file *file) -{ - return 0; -} - -static int fsl_otg_release(struct inode *inode, struct file *file) -{ - return 0; -} - -static const struct file_operations otg_fops = { - .owner = THIS_MODULE, - .llseek = NULL, - .read = NULL, - .write = NULL, - .unlocked_ioctl = fsl_otg_ioctl, - .open = fsl_otg_open, - .release = fsl_otg_release, -}; - -static int fsl_otg_probe(struct platform_device *pdev) -{ - int ret; - - if (!pdev->dev.platform_data) - return -ENODEV; - - /* configure the OTG */ - ret = fsl_otg_conf(pdev); - if (ret) { - dev_err(&pdev->dev, "Couldn't configure OTG module\n"); - return ret; - } - - /* start OTG */ - ret = usb_otg_start(pdev); - if (ret) { - dev_err(&pdev->dev, "Can't init FSL OTG device\n"); - return ret; - } - - ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops); - if (ret) { - dev_err(&pdev->dev, "unable to register FSL OTG device\n"); - return ret; - } - - ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); - if (ret) - dev_warn(&pdev->dev, "Can't register sysfs attribute\n"); - - return ret; -} - -static int fsl_otg_remove(struct platform_device *pdev) -{ - struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; - - usb_remove_phy(&fsl_otg_dev->phy); - free_irq(fsl_otg_dev->irq, fsl_otg_dev); - - iounmap((void *)usb_dr_regs); - - fsl_otg_uninit_timers(); - kfree(fsl_otg_dev->phy.otg); - kfree(fsl_otg_dev); - - device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); - - unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME); - - if (pdata->exit) - pdata->exit(pdev); - - return 0; -} - -struct platform_driver fsl_otg_driver = { - .probe = fsl_otg_probe, - .remove = fsl_otg_remove, - .driver = { - .name = driver_name, - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(fsl_otg_driver); - -MODULE_DESCRIPTION(DRIVER_INFO); -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/fsl_otg.h b/drivers/usb/phy/fsl_otg.h deleted file mode 100644 index ca26628..0000000 --- a/drivers/usb/phy/fsl_otg.h +++ /dev/null @@ -1,406 +0,0 @@ -/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include "otg_fsm.h" -#include -#include - -/* USB Command Register Bit Masks */ -#define USB_CMD_RUN_STOP (0x1<<0) -#define USB_CMD_CTRL_RESET (0x1<<1) -#define USB_CMD_PERIODIC_SCHEDULE_EN (0x1<<4) -#define USB_CMD_ASYNC_SCHEDULE_EN (0x1<<5) -#define USB_CMD_INT_AA_DOORBELL (0x1<<6) -#define USB_CMD_ASP (0x3<<8) -#define USB_CMD_ASYNC_SCH_PARK_EN (0x1<<11) -#define USB_CMD_SUTW (0x1<<13) -#define USB_CMD_ATDTW (0x1<<14) -#define USB_CMD_ITC (0xFF<<16) - -/* bit 15,3,2 are frame list size */ -#define USB_CMD_FRAME_SIZE_1024 (0x0<<15 | 0x0<<2) -#define USB_CMD_FRAME_SIZE_512 (0x0<<15 | 0x1<<2) -#define USB_CMD_FRAME_SIZE_256 (0x0<<15 | 0x2<<2) -#define USB_CMD_FRAME_SIZE_128 (0x0<<15 | 0x3<<2) -#define USB_CMD_FRAME_SIZE_64 (0x1<<15 | 0x0<<2) -#define USB_CMD_FRAME_SIZE_32 (0x1<<15 | 0x1<<2) -#define USB_CMD_FRAME_SIZE_16 (0x1<<15 | 0x2<<2) -#define USB_CMD_FRAME_SIZE_8 (0x1<<15 | 0x3<<2) - -/* bit 9-8 are async schedule park mode count */ -#define USB_CMD_ASP_00 (0x0<<8) -#define USB_CMD_ASP_01 (0x1<<8) -#define USB_CMD_ASP_10 (0x2<<8) -#define USB_CMD_ASP_11 (0x3<<8) -#define USB_CMD_ASP_BIT_POS (8) - -/* bit 23-16 are interrupt threshold control */ -#define USB_CMD_ITC_NO_THRESHOLD (0x00<<16) -#define USB_CMD_ITC_1_MICRO_FRM (0x01<<16) -#define USB_CMD_ITC_2_MICRO_FRM (0x02<<16) -#define USB_CMD_ITC_4_MICRO_FRM (0x04<<16) -#define USB_CMD_ITC_8_MICRO_FRM (0x08<<16) -#define USB_CMD_ITC_16_MICRO_FRM (0x10<<16) -#define USB_CMD_ITC_32_MICRO_FRM (0x20<<16) -#define USB_CMD_ITC_64_MICRO_FRM (0x40<<16) -#define USB_CMD_ITC_BIT_POS (16) - -/* USB Status Register Bit Masks */ -#define USB_STS_INT (0x1<<0) -#define USB_STS_ERR (0x1<<1) -#define USB_STS_PORT_CHANGE (0x1<<2) -#define USB_STS_FRM_LST_ROLL (0x1<<3) -#define USB_STS_SYS_ERR (0x1<<4) -#define USB_STS_IAA (0x1<<5) -#define USB_STS_RESET_RECEIVED (0x1<<6) -#define USB_STS_SOF (0x1<<7) -#define USB_STS_DCSUSPEND (0x1<<8) -#define USB_STS_HC_HALTED (0x1<<12) -#define USB_STS_RCL (0x1<<13) -#define USB_STS_PERIODIC_SCHEDULE (0x1<<14) -#define USB_STS_ASYNC_SCHEDULE (0x1<<15) - -/* USB Interrupt Enable Register Bit Masks */ -#define USB_INTR_INT_EN (0x1<<0) -#define USB_INTR_ERR_INT_EN (0x1<<1) -#define USB_INTR_PC_DETECT_EN (0x1<<2) -#define USB_INTR_FRM_LST_ROLL_EN (0x1<<3) -#define USB_INTR_SYS_ERR_EN (0x1<<4) -#define USB_INTR_ASYN_ADV_EN (0x1<<5) -#define USB_INTR_RESET_EN (0x1<<6) -#define USB_INTR_SOF_EN (0x1<<7) -#define USB_INTR_DEVICE_SUSPEND (0x1<<8) - -/* Device Address bit masks */ -#define USB_DEVICE_ADDRESS_MASK (0x7F<<25) -#define USB_DEVICE_ADDRESS_BIT_POS (25) -/* PORTSC Register Bit Masks,Only one PORT in OTG mode*/ -#define PORTSC_CURRENT_CONNECT_STATUS (0x1<<0) -#define PORTSC_CONNECT_STATUS_CHANGE (0x1<<1) -#define PORTSC_PORT_ENABLE (0x1<<2) -#define PORTSC_PORT_EN_DIS_CHANGE (0x1<<3) -#define PORTSC_OVER_CURRENT_ACT (0x1<<4) -#define PORTSC_OVER_CUURENT_CHG (0x1<<5) -#define PORTSC_PORT_FORCE_RESUME (0x1<<6) -#define PORTSC_PORT_SUSPEND (0x1<<7) -#define PORTSC_PORT_RESET (0x1<<8) -#define PORTSC_LINE_STATUS_BITS (0x3<<10) -#define PORTSC_PORT_POWER (0x1<<12) -#define PORTSC_PORT_INDICTOR_CTRL (0x3<<14) -#define PORTSC_PORT_TEST_CTRL (0xF<<16) -#define PORTSC_WAKE_ON_CONNECT_EN (0x1<<20) -#define PORTSC_WAKE_ON_CONNECT_DIS (0x1<<21) -#define PORTSC_WAKE_ON_OVER_CURRENT (0x1<<22) -#define PORTSC_PHY_LOW_POWER_SPD (0x1<<23) -#define PORTSC_PORT_FORCE_FULL_SPEED (0x1<<24) -#define PORTSC_PORT_SPEED_MASK (0x3<<26) -#define PORTSC_TRANSCEIVER_WIDTH (0x1<<28) -#define PORTSC_PHY_TYPE_SEL (0x3<<30) -/* bit 11-10 are line status */ -#define PORTSC_LINE_STATUS_SE0 (0x0<<10) -#define PORTSC_LINE_STATUS_JSTATE (0x1<<10) -#define PORTSC_LINE_STATUS_KSTATE (0x2<<10) -#define PORTSC_LINE_STATUS_UNDEF (0x3<<10) -#define PORTSC_LINE_STATUS_BIT_POS (10) - -/* bit 15-14 are port indicator control */ -#define PORTSC_PIC_OFF (0x0<<14) -#define PORTSC_PIC_AMBER (0x1<<14) -#define PORTSC_PIC_GREEN (0x2<<14) -#define PORTSC_PIC_UNDEF (0x3<<14) -#define PORTSC_PIC_BIT_POS (14) - -/* bit 19-16 are port test control */ -#define PORTSC_PTC_DISABLE (0x0<<16) -#define PORTSC_PTC_JSTATE (0x1<<16) -#define PORTSC_PTC_KSTATE (0x2<<16) -#define PORTSC_PTC_SEQNAK (0x3<<16) -#define PORTSC_PTC_PACKET (0x4<<16) -#define PORTSC_PTC_FORCE_EN (0x5<<16) -#define PORTSC_PTC_BIT_POS (16) - -/* bit 27-26 are port speed */ -#define PORTSC_PORT_SPEED_FULL (0x0<<26) -#define PORTSC_PORT_SPEED_LOW (0x1<<26) -#define PORTSC_PORT_SPEED_HIGH (0x2<<26) -#define PORTSC_PORT_SPEED_UNDEF (0x3<<26) -#define PORTSC_SPEED_BIT_POS (26) - -/* bit 28 is parallel transceiver width for UTMI interface */ -#define PORTSC_PTW (0x1<<28) -#define PORTSC_PTW_8BIT (0x0<<28) -#define PORTSC_PTW_16BIT (0x1<<28) - -/* bit 31-30 are port transceiver select */ -#define PORTSC_PTS_UTMI (0x0<<30) -#define PORTSC_PTS_ULPI (0x2<<30) -#define PORTSC_PTS_FSLS_SERIAL (0x3<<30) -#define PORTSC_PTS_BIT_POS (30) - -#define PORTSC_W1C_BITS \ - (PORTSC_CONNECT_STATUS_CHANGE | \ - PORTSC_PORT_EN_DIS_CHANGE | \ - PORTSC_OVER_CUURENT_CHG) - -/* OTG Status Control Register Bit Masks */ -#define OTGSC_CTRL_VBUS_DISCHARGE (0x1<<0) -#define OTGSC_CTRL_VBUS_CHARGE (0x1<<1) -#define OTGSC_CTRL_OTG_TERMINATION (0x1<<3) -#define OTGSC_CTRL_DATA_PULSING (0x1<<4) -#define OTGSC_CTRL_ID_PULL_EN (0x1<<5) -#define OTGSC_HA_DATA_PULSE (0x1<<6) -#define OTGSC_HA_BA (0x1<<7) -#define OTGSC_STS_USB_ID (0x1<<8) -#define OTGSC_STS_A_VBUS_VALID (0x1<<9) -#define OTGSC_STS_A_SESSION_VALID (0x1<<10) -#define OTGSC_STS_B_SESSION_VALID (0x1<<11) -#define OTGSC_STS_B_SESSION_END (0x1<<12) -#define OTGSC_STS_1MS_TOGGLE (0x1<<13) -#define OTGSC_STS_DATA_PULSING (0x1<<14) -#define OTGSC_INTSTS_USB_ID (0x1<<16) -#define OTGSC_INTSTS_A_VBUS_VALID (0x1<<17) -#define OTGSC_INTSTS_A_SESSION_VALID (0x1<<18) -#define OTGSC_INTSTS_B_SESSION_VALID (0x1<<19) -#define OTGSC_INTSTS_B_SESSION_END (0x1<<20) -#define OTGSC_INTSTS_1MS (0x1<<21) -#define OTGSC_INTSTS_DATA_PULSING (0x1<<22) -#define OTGSC_INTR_USB_ID_EN (0x1<<24) -#define OTGSC_INTR_A_VBUS_VALID_EN (0x1<<25) -#define OTGSC_INTR_A_SESSION_VALID_EN (0x1<<26) -#define OTGSC_INTR_B_SESSION_VALID_EN (0x1<<27) -#define OTGSC_INTR_B_SESSION_END_EN (0x1<<28) -#define OTGSC_INTR_1MS_TIMER_EN (0x1<<29) -#define OTGSC_INTR_DATA_PULSING_EN (0x1<<30) -#define OTGSC_INTSTS_MASK (0x00ff0000) - -/* USB MODE Register Bit Masks */ -#define USB_MODE_CTRL_MODE_IDLE (0x0<<0) -#define USB_MODE_CTRL_MODE_DEVICE (0x2<<0) -#define USB_MODE_CTRL_MODE_HOST (0x3<<0) -#define USB_MODE_CTRL_MODE_RSV (0x1<<0) -#define USB_MODE_SETUP_LOCK_OFF (0x1<<3) -#define USB_MODE_STREAM_DISABLE (0x1<<4) -#define USB_MODE_ES (0x1<<2) /* Endian Select */ - -/* control Register Bit Masks */ -#define USB_CTRL_IOENB (0x1<<2) -#define USB_CTRL_ULPI_INT0EN (0x1<<0) - -/* BCSR5 */ -#define BCSR5_INT_USB (0x02) - -/* USB module clk cfg */ -#define SCCR_OFFS (0xA08) -#define SCCR_USB_CLK_DISABLE (0x00000000) /* USB clk disable */ -#define SCCR_USB_MPHCM_11 (0x00c00000) -#define SCCR_USB_MPHCM_01 (0x00400000) -#define SCCR_USB_MPHCM_10 (0x00800000) -#define SCCR_USB_DRCM_11 (0x00300000) -#define SCCR_USB_DRCM_01 (0x00100000) -#define SCCR_USB_DRCM_10 (0x00200000) - -#define SICRL_OFFS (0x114) -#define SICRL_USB0 (0x40000000) -#define SICRL_USB1 (0x20000000) - -#define SICRH_OFFS (0x118) -#define SICRH_USB_UTMI (0x00020000) - -/* OTG interrupt enable bit masks */ -#define OTGSC_INTERRUPT_ENABLE_BITS_MASK \ - (OTGSC_INTR_USB_ID_EN | \ - OTGSC_INTR_1MS_TIMER_EN | \ - OTGSC_INTR_A_VBUS_VALID_EN | \ - OTGSC_INTR_A_SESSION_VALID_EN | \ - OTGSC_INTR_B_SESSION_VALID_EN | \ - OTGSC_INTR_B_SESSION_END_EN | \ - OTGSC_INTR_DATA_PULSING_EN) - -/* OTG interrupt status bit masks */ -#define OTGSC_INTERRUPT_STATUS_BITS_MASK \ - (OTGSC_INTSTS_USB_ID | \ - OTGSC_INTR_1MS_TIMER_EN | \ - OTGSC_INTSTS_A_VBUS_VALID | \ - OTGSC_INTSTS_A_SESSION_VALID | \ - OTGSC_INTSTS_B_SESSION_VALID | \ - OTGSC_INTSTS_B_SESSION_END | \ - OTGSC_INTSTS_DATA_PULSING) - -/* - * A-DEVICE timing constants - */ - -/* Wait for VBUS Rise */ -#define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */ - -/* Wait for B-Connect */ -#define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2 - * This is only used to get out of - * OTG_STATE_A_WAIT_BCON state if there was - * no connection for these many milliseconds - */ - -/* A-Idle to B-Disconnect */ -/* It is necessary for this timer to be more than 750 ms because of a bug in OPT - * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated - * in the test description - */ -#define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */ - -/* B-Idle to A-Disconnect */ -#define TA_BIDL_ADIS (12) /* 3 to 200 ms */ - -/* B-device timing constants */ - - -/* Data-Line Pulse Time*/ -#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */ -#define TB_DATA_PLS_MIN (5) /* minimum 5 ms */ -#define TB_DATA_PLS_MAX (10) /* maximum 10 ms */ - -/* SRP Initiate Time */ -#define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */ - -/* SRP Fail Time */ -#define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2*/ - -/* SRP result wait time */ -#define TB_SRP_WAIT (60) - -/* VBus time */ -#define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */ - -/* Discharge time */ -/* This time should be less than 10ms. It varies from system to system. */ -#define TB_VBUS_DSCHRG (8) - -/* A-SE0 to B-Reset */ -#define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */ - -/* A bus suspend timer before we can switch to b_wait_aconn */ -#define TB_A_SUSPEND (7) -#define TB_BUS_RESUME (12) - -/* SE0 Time Before SRP */ -#define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */ - -#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate) - -struct usb_dr_mmap { - /* Capability register */ - u8 res1[256]; - u16 caplength; /* Capability Register Length */ - u16 hciversion; /* Host Controller Interface Version */ - u32 hcsparams; /* Host Controller Structual Parameters */ - u32 hccparams; /* Host Controller Capability Parameters */ - u8 res2[20]; - u32 dciversion; /* Device Controller Interface Version */ - u32 dccparams; /* Device Controller Capability Parameters */ - u8 res3[24]; - /* Operation register */ - u32 usbcmd; /* USB Command Register */ - u32 usbsts; /* USB Status Register */ - u32 usbintr; /* USB Interrupt Enable Register */ - u32 frindex; /* Frame Index Register */ - u8 res4[4]; - u32 deviceaddr; /* Device Address */ - u32 endpointlistaddr; /* Endpoint List Address Register */ - u8 res5[4]; - u32 burstsize; /* Master Interface Data Burst Size Register */ - u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ - u8 res6[8]; - u32 ulpiview; /* ULPI register access */ - u8 res7[12]; - u32 configflag; /* Configure Flag Register */ - u32 portsc; /* Port 1 Status and Control Register */ - u8 res8[28]; - u32 otgsc; /* On-The-Go Status and Control */ - u32 usbmode; /* USB Mode Register */ - u32 endptsetupstat; /* Endpoint Setup Status Register */ - u32 endpointprime; /* Endpoint Initialization Register */ - u32 endptflush; /* Endpoint Flush Register */ - u32 endptstatus; /* Endpoint Status Register */ - u32 endptcomplete; /* Endpoint Complete Register */ - u32 endptctrl[6]; /* Endpoint Control Registers */ - u8 res9[552]; - u32 snoop1; - u32 snoop2; - u32 age_cnt_thresh; /* Age Count Threshold Register */ - u32 pri_ctrl; /* Priority Control Register */ - u32 si_ctrl; /* System Interface Control Register */ - u8 res10[236]; - u32 control; /* General Purpose Control Register */ -}; - -struct fsl_otg_timer { - unsigned long expires; /* Number of count increase to timeout */ - unsigned long count; /* Tick counter */ - void (*function)(unsigned long); /* Timeout function */ - unsigned long data; /* Data passed to function */ - struct list_head list; -}; - -inline struct fsl_otg_timer *otg_timer_initializer -(void (*function)(unsigned long), unsigned long expires, unsigned long data) -{ - struct fsl_otg_timer *timer; - - timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL); - if (!timer) - return NULL; - timer->function = function; - timer->expires = expires; - timer->data = data; - return timer; -} - -struct fsl_otg { - struct usb_phy phy; - struct otg_fsm fsm; - struct usb_dr_mmap *dr_mem_map; - struct delayed_work otg_event; - - /* used for usb host */ - struct work_struct work_wq; - u8 host_working; - - int irq; -}; - -struct fsl_otg_config { - u8 otg_port; -}; - -/* For SRP and HNP handle */ -#define FSL_OTG_MAJOR 240 -#define FSL_OTG_NAME "fsl-usb2-otg" -/* Command to OTG driver ioctl */ -#define OTG_IOCTL_MAGIC FSL_OTG_MAJOR -/* if otg work as host, it should return 1, otherwise return 0 */ -#define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int) -#define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int) -#define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int) -#define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int) -#define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int) -#define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int) -#define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int) -#define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int) -#define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int) - -void fsl_otg_add_timer(void *timer); -void fsl_otg_del_timer(void *timer); -void fsl_otg_pulse_vbus(void); diff --git a/drivers/usb/phy/gpio_vbus.c b/drivers/usb/phy/gpio_vbus.c deleted file mode 100644 index a7d4ac5..0000000 --- a/drivers/usb/phy/gpio_vbus.c +++ /dev/null @@ -1,416 +0,0 @@ -/* - * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices - * - * Copyright (c) 2008 Philipp Zabel - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include -#include -#include - - -/* - * A simple GPIO VBUS sensing driver for B peripheral only devices - * with internal transceivers. It can control a D+ pullup GPIO and - * a regulator to limit the current drawn from VBUS. - * - * Needs to be loaded before the UDC driver that will use it. - */ -struct gpio_vbus_data { - struct usb_phy phy; - struct device *dev; - struct regulator *vbus_draw; - int vbus_draw_enabled; - unsigned mA; - struct delayed_work work; - int vbus; - int irq; -}; - - -/* - * This driver relies on "both edges" triggering. VBUS has 100 msec to - * stabilize, so the peripheral controller driver may need to cope with - * some bouncing due to current surges (e.g. charging local capacitance) - * and contact chatter. - * - * REVISIT in desperate straits, toggling between rising and falling - * edges might be workable. - */ -#define VBUS_IRQ_FLAGS \ - (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING) - - -/* interface to regulator framework */ -static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) -{ - struct regulator *vbus_draw = gpio_vbus->vbus_draw; - int enabled; - - if (!vbus_draw) - return; - - enabled = gpio_vbus->vbus_draw_enabled; - if (mA) { - regulator_set_current_limit(vbus_draw, 0, 1000 * mA); - if (!enabled) { - regulator_enable(vbus_draw); - gpio_vbus->vbus_draw_enabled = 1; - } - } else { - if (enabled) { - regulator_disable(vbus_draw); - gpio_vbus->vbus_draw_enabled = 0; - } - } - gpio_vbus->mA = mA; -} - -static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) -{ - int vbus; - - vbus = gpio_get_value(pdata->gpio_vbus); - if (pdata->gpio_vbus_inverted) - vbus = !vbus; - - return vbus; -} - -static void gpio_vbus_work(struct work_struct *work) -{ - struct gpio_vbus_data *gpio_vbus = - container_of(work, struct gpio_vbus_data, work.work); - struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; - int gpio, status, vbus; - - if (!gpio_vbus->phy.otg->gadget) - return; - - vbus = is_vbus_powered(pdata); - if ((vbus ^ gpio_vbus->vbus) == 0) - return; - gpio_vbus->vbus = vbus; - - /* Peripheral controllers which manage the pullup themselves won't have - * gpio_pullup configured here. If it's configured here, we'll do what - * isp1301_omap::b_peripheral() does and enable the pullup here... although - * that may complicate usb_gadget_{,dis}connect() support. - */ - gpio = pdata->gpio_pullup; - - if (vbus) { - status = USB_EVENT_VBUS; - gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; - gpio_vbus->phy.last_event = status; - usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); - - /* drawing a "unit load" is *always* OK, except for OTG */ - set_vbus_draw(gpio_vbus, 100); - - /* optionally enable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, !pdata->gpio_pullup_inverted); - - atomic_notifier_call_chain(&gpio_vbus->phy.notifier, - status, gpio_vbus->phy.otg->gadget); - } else { - /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); - - set_vbus_draw(gpio_vbus, 0); - - usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); - status = USB_EVENT_NONE; - gpio_vbus->phy.state = OTG_STATE_B_IDLE; - gpio_vbus->phy.last_event = status; - - atomic_notifier_call_chain(&gpio_vbus->phy.notifier, - status, gpio_vbus->phy.otg->gadget); - } -} - -/* VBUS change IRQ handler */ -static irqreturn_t gpio_vbus_irq(int irq, void *data) -{ - struct platform_device *pdev = data; - struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; - struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); - struct usb_otg *otg = gpio_vbus->phy.otg; - - dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", - is_vbus_powered(pdata) ? "supplied" : "inactive", - otg->gadget ? otg->gadget->name : "none"); - - if (otg->gadget) - schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100)); - - return IRQ_HANDLED; -} - -/* OTG transceiver interface */ - -/* bind/unbind the peripheral controller */ -static int gpio_vbus_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - struct gpio_vbus_data *gpio_vbus; - struct gpio_vbus_mach_info *pdata; - struct platform_device *pdev; - int gpio; - - gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy); - pdev = to_platform_device(gpio_vbus->dev); - pdata = gpio_vbus->dev->platform_data; - gpio = pdata->gpio_pullup; - - if (!gadget) { - dev_dbg(&pdev->dev, "unregistering gadget '%s'\n", - otg->gadget->name); - - /* optionally disable D+ pullup */ - if (gpio_is_valid(gpio)) - gpio_set_value(gpio, pdata->gpio_pullup_inverted); - - set_vbus_draw(gpio_vbus, 0); - - usb_gadget_vbus_disconnect(otg->gadget); - otg->phy->state = OTG_STATE_UNDEFINED; - - otg->gadget = NULL; - return 0; - } - - otg->gadget = gadget; - dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name); - - /* initialize connection state */ - gpio_vbus->vbus = 0; /* start with disconnected */ - gpio_vbus_irq(gpio_vbus->irq, pdev); - return 0; -} - -/* effective for B devices, ignored for A-peripheral */ -static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA) -{ - struct gpio_vbus_data *gpio_vbus; - - gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); - - if (phy->state == OTG_STATE_B_PERIPHERAL) - set_vbus_draw(gpio_vbus, mA); - return 0; -} - -/* for non-OTG B devices: set/clear transceiver suspend mode */ -static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) -{ - struct gpio_vbus_data *gpio_vbus; - - gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); - - /* draw max 0 mA from vbus in suspend mode; or the previously - * recorded amount of current if not suspended - * - * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA - * if they're wake-enabled ... we don't handle that yet. - */ - return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA); -} - -/* platform driver interface */ - -static int __init gpio_vbus_probe(struct platform_device *pdev) -{ - struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; - struct gpio_vbus_data *gpio_vbus; - struct resource *res; - int err, gpio, irq; - unsigned long irqflags; - - if (!pdata || !gpio_is_valid(pdata->gpio_vbus)) - return -EINVAL; - gpio = pdata->gpio_vbus; - - gpio_vbus = kzalloc(sizeof(struct gpio_vbus_data), GFP_KERNEL); - if (!gpio_vbus) - return -ENOMEM; - - gpio_vbus->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); - if (!gpio_vbus->phy.otg) { - kfree(gpio_vbus); - return -ENOMEM; - } - - platform_set_drvdata(pdev, gpio_vbus); - gpio_vbus->dev = &pdev->dev; - gpio_vbus->phy.label = "gpio-vbus"; - gpio_vbus->phy.set_power = gpio_vbus_set_power; - gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; - gpio_vbus->phy.state = OTG_STATE_UNDEFINED; - - gpio_vbus->phy.otg->phy = &gpio_vbus->phy; - gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral; - - err = gpio_request(gpio, "vbus_detect"); - if (err) { - dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n", - gpio, err); - goto err_gpio; - } - gpio_direction_input(gpio); - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (res) { - irq = res->start; - irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; - } else { - irq = gpio_to_irq(gpio); - irqflags = VBUS_IRQ_FLAGS; - } - - gpio_vbus->irq = irq; - - /* if data line pullup is in use, initialize it to "not pulling up" */ - gpio = pdata->gpio_pullup; - if (gpio_is_valid(gpio)) { - err = gpio_request(gpio, "udc_pullup"); - if (err) { - dev_err(&pdev->dev, - "can't request pullup gpio %d, err: %d\n", - gpio, err); - gpio_free(pdata->gpio_vbus); - goto err_gpio; - } - gpio_direction_output(gpio, pdata->gpio_pullup_inverted); - } - - err = request_irq(irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev); - if (err) { - dev_err(&pdev->dev, "can't request irq %i, err: %d\n", - irq, err); - goto err_irq; - } - - ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); - - INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work); - - gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); - if (IS_ERR(gpio_vbus->vbus_draw)) { - dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n", - PTR_ERR(gpio_vbus->vbus_draw)); - gpio_vbus->vbus_draw = NULL; - } - - /* only active when a gadget is registered */ - err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2); - if (err) { - dev_err(&pdev->dev, "can't register transceiver, err: %d\n", - err); - goto err_otg; - } - - device_init_wakeup(&pdev->dev, pdata->wakeup); - - return 0; -err_otg: - regulator_put(gpio_vbus->vbus_draw); - free_irq(irq, pdev); -err_irq: - if (gpio_is_valid(pdata->gpio_pullup)) - gpio_free(pdata->gpio_pullup); - gpio_free(pdata->gpio_vbus); -err_gpio: - platform_set_drvdata(pdev, NULL); - kfree(gpio_vbus->phy.otg); - kfree(gpio_vbus); - return err; -} - -static int __exit gpio_vbus_remove(struct platform_device *pdev) -{ - struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); - struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; - int gpio = pdata->gpio_vbus; - - device_init_wakeup(&pdev->dev, 0); - cancel_delayed_work_sync(&gpio_vbus->work); - regulator_put(gpio_vbus->vbus_draw); - - usb_remove_phy(&gpio_vbus->phy); - - free_irq(gpio_vbus->irq, pdev); - if (gpio_is_valid(pdata->gpio_pullup)) - gpio_free(pdata->gpio_pullup); - gpio_free(gpio); - platform_set_drvdata(pdev, NULL); - kfree(gpio_vbus->phy.otg); - kfree(gpio_vbus); - - return 0; -} - -#ifdef CONFIG_PM -static int gpio_vbus_pm_suspend(struct device *dev) -{ - struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); - - if (device_may_wakeup(dev)) - enable_irq_wake(gpio_vbus->irq); - - return 0; -} - -static int gpio_vbus_pm_resume(struct device *dev) -{ - struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); - - if (device_may_wakeup(dev)) - disable_irq_wake(gpio_vbus->irq); - - return 0; -} - -static const struct dev_pm_ops gpio_vbus_dev_pm_ops = { - .suspend = gpio_vbus_pm_suspend, - .resume = gpio_vbus_pm_resume, -}; -#endif - -/* NOTE: the gpio-vbus device may *NOT* be hotplugged */ - -MODULE_ALIAS("platform:gpio-vbus"); - -static struct platform_driver gpio_vbus_driver = { - .driver = { - .name = "gpio-vbus", - .owner = THIS_MODULE, -#ifdef CONFIG_PM - .pm = &gpio_vbus_dev_pm_ops, -#endif - }, - .remove = __exit_p(gpio_vbus_remove), -}; - -module_platform_driver_probe(gpio_vbus_driver, gpio_vbus_probe); - -MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); -MODULE_AUTHOR("Philipp Zabel"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/isp1301.c b/drivers/usb/phy/isp1301.c deleted file mode 100644 index 18dbf7e..0000000 --- a/drivers/usb/phy/isp1301.c +++ /dev/null @@ -1,71 +0,0 @@ -/* - * NXP ISP1301 USB transceiver driver - * - * Copyright (C) 2012 Roland Stigge - * - * Author: Roland Stigge - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include - -#define DRV_NAME "isp1301" - -static const struct i2c_device_id isp1301_id[] = { - { "isp1301", 0 }, - { } -}; - -static struct i2c_client *isp1301_i2c_client; - -static int isp1301_probe(struct i2c_client *client, - const struct i2c_device_id *i2c_id) -{ - isp1301_i2c_client = client; - return 0; -} - -static int isp1301_remove(struct i2c_client *client) -{ - return 0; -} - -static struct i2c_driver isp1301_driver = { - .driver = { - .name = DRV_NAME, - }, - .probe = isp1301_probe, - .remove = isp1301_remove, - .id_table = isp1301_id, -}; - -module_i2c_driver(isp1301_driver); - -static int match(struct device *dev, void *data) -{ - struct device_node *node = (struct device_node *)data; - return (dev->of_node == node) && - (dev->driver == &isp1301_driver.driver); -} - -struct i2c_client *isp1301_get_client(struct device_node *node) -{ - if (node) { /* reference of ISP1301 I2C node via DT */ - struct device *dev = bus_find_device(&i2c_bus_type, NULL, - node, match); - if (!dev) - return NULL; - return to_i2c_client(dev); - } else { /* non-DT: only one ISP1301 chip supported */ - return isp1301_i2c_client; - } -} -EXPORT_SYMBOL_GPL(isp1301_get_client); - -MODULE_AUTHOR("Roland Stigge "); -MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/isp1301_omap.c b/drivers/usb/phy/isp1301_omap.c deleted file mode 100644 index 8fe0c3b..0000000 --- a/drivers/usb/phy/isp1301_omap.c +++ /dev/null @@ -1,1656 +0,0 @@ -/* - * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller - * - * Copyright (C) 2004 Texas Instruments - * Copyright (C) 2004 David Brownell - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#include - -#include - -#ifndef DEBUG -#undef VERBOSE -#endif - - -#define DRIVER_VERSION "24 August 2004" -#define DRIVER_NAME (isp1301_driver.driver.name) - -MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver"); -MODULE_LICENSE("GPL"); - -struct isp1301 { - struct usb_phy phy; - struct i2c_client *client; - void (*i2c_release)(struct device *dev); - - int irq_type; - - u32 last_otg_ctrl; - unsigned working:1; - - struct timer_list timer; - - /* use keventd context to change the state for us */ - struct work_struct work; - - unsigned long todo; -# define WORK_UPDATE_ISP 0 /* update ISP from OTG */ -# define WORK_UPDATE_OTG 1 /* update OTG from ISP */ -# define WORK_HOST_RESUME 4 /* resume host */ -# define WORK_TIMER 6 /* timer fired */ -# define WORK_STOP 7 /* don't resubmit */ -}; - - -/* bits in OTG_CTRL */ - -#define OTG_XCEIV_OUTPUTS \ - (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID) -#define OTG_XCEIV_INPUTS \ - (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID) -#define OTG_CTRL_BITS \ - (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP) - /* and OTG_PULLUP is sometimes written */ - -#define OTG_CTRL_MASK (OTG_DRIVER_SEL| \ - OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \ - OTG_CTRL_BITS) - - -/*-------------------------------------------------------------------------*/ - -/* board-specific PM hooks */ - -#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) - -#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) - -#include - -#else - -static inline int tps65010_set_vbus_draw(unsigned mA) -{ - pr_debug("tps65010: draw %d mA (STUB)\n", mA); - return 0; -} - -#endif - -static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) -{ - int status = tps65010_set_vbus_draw(mA); - if (status < 0) - pr_debug(" VBUS %d mA error %d\n", mA, status); -} - -#else - -static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) -{ - /* H4 controls this by DIP switch S2.4; no soft control. - * ON means the charger is always enabled. Leave it OFF - * unless the OTG port is used only in B-peripheral mode. - */ -} - -#endif - -static void enable_vbus_source(struct isp1301 *isp) -{ - /* this board won't supply more than 8mA vbus power. - * some boards can switch a 100ma "unit load" (or more). - */ -} - - -/* products will deliver OTG messages with LEDs, GUI, etc */ -static inline void notresponding(struct isp1301 *isp) -{ - printk(KERN_NOTICE "OTG device not responding.\n"); -} - - -/*-------------------------------------------------------------------------*/ - -static struct i2c_driver isp1301_driver; - -/* smbus apis are used for portability */ - -static inline u8 -isp1301_get_u8(struct isp1301 *isp, u8 reg) -{ - return i2c_smbus_read_byte_data(isp->client, reg + 0); -} - -static inline int -isp1301_get_u16(struct isp1301 *isp, u8 reg) -{ - return i2c_smbus_read_word_data(isp->client, reg); -} - -static inline int -isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits) -{ - return i2c_smbus_write_byte_data(isp->client, reg + 0, bits); -} - -static inline int -isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) -{ - return i2c_smbus_write_byte_data(isp->client, reg + 1, bits); -} - -/*-------------------------------------------------------------------------*/ - -/* identification */ -#define ISP1301_VENDOR_ID 0x00 /* u16 read */ -#define ISP1301_PRODUCT_ID 0x02 /* u16 read */ -#define ISP1301_BCD_DEVICE 0x14 /* u16 read */ - -#define I2C_VENDOR_ID_PHILIPS 0x04cc -#define I2C_PRODUCT_ID_PHILIPS_1301 0x1301 - -/* operational registers */ -#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ -# define MC1_SPEED (1 << 0) -# define MC1_SUSPEND (1 << 1) -# define MC1_DAT_SE0 (1 << 2) -# define MC1_TRANSPARENT (1 << 3) -# define MC1_BDIS_ACON_EN (1 << 4) -# define MC1_OE_INT_EN (1 << 5) -# define MC1_UART_EN (1 << 6) -# define MC1_MASK 0x7f -#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ -# define MC2_GLOBAL_PWR_DN (1 << 0) -# define MC2_SPD_SUSP_CTRL (1 << 1) -# define MC2_BI_DI (1 << 2) -# define MC2_TRANSP_BDIR0 (1 << 3) -# define MC2_TRANSP_BDIR1 (1 << 4) -# define MC2_AUDIO_EN (1 << 5) -# define MC2_PSW_EN (1 << 6) -# define MC2_EN2V7 (1 << 7) -#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ -# define OTG1_DP_PULLUP (1 << 0) -# define OTG1_DM_PULLUP (1 << 1) -# define OTG1_DP_PULLDOWN (1 << 2) -# define OTG1_DM_PULLDOWN (1 << 3) -# define OTG1_ID_PULLDOWN (1 << 4) -# define OTG1_VBUS_DRV (1 << 5) -# define OTG1_VBUS_DISCHRG (1 << 6) -# define OTG1_VBUS_CHRG (1 << 7) -#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ -# define OTG_B_SESS_END (1 << 6) -# define OTG_B_SESS_VLD (1 << 7) - -#define ISP1301_INTERRUPT_SOURCE 0x08 /* u8 read */ -#define ISP1301_INTERRUPT_LATCH 0x0A /* u8 read, set, +1 clear */ - -#define ISP1301_INTERRUPT_FALLING 0x0C /* u8 read, set, +1 clear */ -#define ISP1301_INTERRUPT_RISING 0x0E /* u8 read, set, +1 clear */ - -/* same bitfields in all interrupt registers */ -# define INTR_VBUS_VLD (1 << 0) -# define INTR_SESS_VLD (1 << 1) -# define INTR_DP_HI (1 << 2) -# define INTR_ID_GND (1 << 3) -# define INTR_DM_HI (1 << 4) -# define INTR_ID_FLOAT (1 << 5) -# define INTR_BDIS_ACON (1 << 6) -# define INTR_CR_INT (1 << 7) - -/*-------------------------------------------------------------------------*/ - -static inline const char *state_name(struct isp1301 *isp) -{ - return usb_otg_state_string(isp->phy.state); -} - -/*-------------------------------------------------------------------------*/ - -/* NOTE: some of this ISP1301 setup is specific to H2 boards; - * not everything is guarded by board-specific checks, or even using - * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI. - * - * ALSO: this currently doesn't use ISP1301 low-power modes - * while OTG is running. - */ - -static void power_down(struct isp1301 *isp) -{ - isp->phy.state = OTG_STATE_UNDEFINED; - - // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND); - - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); -} - -static void power_up(struct isp1301 *isp) -{ - // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND); - - /* do this only when cpu is driving transceiver, - * so host won't see a low speed device... - */ - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); -} - -#define NO_HOST_SUSPEND - -static int host_suspend(struct isp1301 *isp) -{ -#ifdef NO_HOST_SUSPEND - return 0; -#else - struct device *dev; - - if (!isp->phy.otg->host) - return -ENODEV; - - /* Currently ASSUMES only the OTG port matters; - * other ports could be active... - */ - dev = isp->phy.otg->host->controller; - return dev->driver->suspend(dev, 3, 0); -#endif -} - -static int host_resume(struct isp1301 *isp) -{ -#ifdef NO_HOST_SUSPEND - return 0; -#else - struct device *dev; - - if (!isp->phy.otg->host) - return -ENODEV; - - dev = isp->phy.otg->host->controller; - return dev->driver->resume(dev, 0); -#endif -} - -static int gadget_suspend(struct isp1301 *isp) -{ - isp->phy.otg->gadget->b_hnp_enable = 0; - isp->phy.otg->gadget->a_hnp_support = 0; - isp->phy.otg->gadget->a_alt_hnp_support = 0; - return usb_gadget_vbus_disconnect(isp->phy.otg->gadget); -} - -/*-------------------------------------------------------------------------*/ - -#define TIMER_MINUTES 10 -#define TIMER_JIFFIES (TIMER_MINUTES * 60 * HZ) - -/* Almost all our I2C messaging comes from a work queue's task context. - * NOTE: guaranteeing certain response times might mean we shouldn't - * share keventd's work queue; a realtime task might be safest. - */ -static void isp1301_defer_work(struct isp1301 *isp, int work) -{ - int status; - - if (isp && !test_and_set_bit(work, &isp->todo)) { - (void) get_device(&isp->client->dev); - status = schedule_work(&isp->work); - if (!status && !isp->working) - dev_vdbg(&isp->client->dev, - "work item %d may be lost\n", work); - } -} - -/* called from irq handlers */ -static void a_idle(struct isp1301 *isp, const char *tag) -{ - u32 l; - - if (isp->phy.state == OTG_STATE_A_IDLE) - return; - - isp->phy.otg->default_a = 1; - if (isp->phy.otg->host) { - isp->phy.otg->host->is_b_host = 0; - host_suspend(isp); - } - if (isp->phy.otg->gadget) { - isp->phy.otg->gadget->is_a_peripheral = 1; - gadget_suspend(isp); - } - isp->phy.state = OTG_STATE_A_IDLE; - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - isp->last_otg_ctrl = l; - pr_debug(" --> %s/%s\n", state_name(isp), tag); -} - -/* called from irq handlers */ -static void b_idle(struct isp1301 *isp, const char *tag) -{ - u32 l; - - if (isp->phy.state == OTG_STATE_B_IDLE) - return; - - isp->phy.otg->default_a = 0; - if (isp->phy.otg->host) { - isp->phy.otg->host->is_b_host = 1; - host_suspend(isp); - } - if (isp->phy.otg->gadget) { - isp->phy.otg->gadget->is_a_peripheral = 0; - gadget_suspend(isp); - } - isp->phy.state = OTG_STATE_B_IDLE; - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - isp->last_otg_ctrl = l; - pr_debug(" --> %s/%s\n", state_name(isp), tag); -} - -static void -dump_regs(struct isp1301 *isp, const char *label) -{ -#ifdef DEBUG - u8 ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1); - u8 status = isp1301_get_u8(isp, ISP1301_OTG_STATUS); - u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); - - pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n", - omap_readl(OTG_CTRL), label, state_name(isp), - ctrl, status, src); - /* mode control and irq enables don't change much */ -#endif -} - -/*-------------------------------------------------------------------------*/ - -#ifdef CONFIG_USB_OTG - -/* - * The OMAP OTG controller handles most of the OTG state transitions. - * - * We translate isp1301 outputs (mostly voltage comparator status) into - * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state - * flags into isp1301 inputs ... and infer state transitions. - */ - -#ifdef VERBOSE - -static void check_state(struct isp1301 *isp, const char *tag) -{ - enum usb_otg_state state = OTG_STATE_UNDEFINED; - u8 fsm = omap_readw(OTG_TEST) & 0x0ff; - unsigned extra = 0; - - switch (fsm) { - - /* default-b */ - case 0x0: - state = OTG_STATE_B_IDLE; - break; - case 0x3: - case 0x7: - extra = 1; - case 0x1: - state = OTG_STATE_B_PERIPHERAL; - break; - case 0x11: - state = OTG_STATE_B_SRP_INIT; - break; - - /* extra dual-role default-b states */ - case 0x12: - case 0x13: - case 0x16: - extra = 1; - case 0x17: - state = OTG_STATE_B_WAIT_ACON; - break; - case 0x34: - state = OTG_STATE_B_HOST; - break; - - /* default-a */ - case 0x36: - state = OTG_STATE_A_IDLE; - break; - case 0x3c: - state = OTG_STATE_A_WAIT_VFALL; - break; - case 0x7d: - state = OTG_STATE_A_VBUS_ERR; - break; - case 0x9e: - case 0x9f: - extra = 1; - case 0x89: - state = OTG_STATE_A_PERIPHERAL; - break; - case 0xb7: - state = OTG_STATE_A_WAIT_VRISE; - break; - case 0xb8: - state = OTG_STATE_A_WAIT_BCON; - break; - case 0xb9: - state = OTG_STATE_A_HOST; - break; - case 0xba: - state = OTG_STATE_A_SUSPEND; - break; - default: - break; - } - if (isp->phy.state == state && !extra) - return; - pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag, - usb_otg_state_string(state), fsm, state_name(isp), - omap_readl(OTG_CTRL)); -} - -#else - -static inline void check_state(struct isp1301 *isp, const char *tag) { } - -#endif - -/* outputs from ISP1301_INTERRUPT_SOURCE */ -static void update_otg1(struct isp1301 *isp, u8 int_src) -{ - u32 otg_ctrl; - - otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - otg_ctrl &= ~OTG_XCEIV_INPUTS; - otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); - - if (int_src & INTR_SESS_VLD) - otg_ctrl |= OTG_ASESSVLD; - else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) { - a_idle(isp, "vfall"); - otg_ctrl &= ~OTG_CTRL_BITS; - } - if (int_src & INTR_VBUS_VLD) - otg_ctrl |= OTG_VBUSVLD; - if (int_src & INTR_ID_GND) { /* default-A */ - if (isp->phy.state == OTG_STATE_B_IDLE - || isp->phy.state - == OTG_STATE_UNDEFINED) { - a_idle(isp, "init"); - return; - } - } else { /* default-B */ - otg_ctrl |= OTG_ID; - if (isp->phy.state == OTG_STATE_A_IDLE - || isp->phy.state == OTG_STATE_UNDEFINED) { - b_idle(isp, "init"); - return; - } - } - omap_writel(otg_ctrl, OTG_CTRL); -} - -/* outputs from ISP1301_OTG_STATUS */ -static void update_otg2(struct isp1301 *isp, u8 otg_status) -{ - u32 otg_ctrl; - - otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - otg_ctrl &= ~OTG_XCEIV_INPUTS; - otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND); - if (otg_status & OTG_B_SESS_VLD) - otg_ctrl |= OTG_BSESSVLD; - else if (otg_status & OTG_B_SESS_END) - otg_ctrl |= OTG_BSESSEND; - omap_writel(otg_ctrl, OTG_CTRL); -} - -/* inputs going to ISP1301 */ -static void otg_update_isp(struct isp1301 *isp) -{ - u32 otg_ctrl, otg_change; - u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP; - - otg_ctrl = omap_readl(OTG_CTRL); - otg_change = otg_ctrl ^ isp->last_otg_ctrl; - isp->last_otg_ctrl = otg_ctrl; - otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS; - - switch (isp->phy.state) { - case OTG_STATE_B_IDLE: - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_SRP_INIT: - if (!(otg_ctrl & OTG_PULLUP)) { - // if (otg_ctrl & OTG_B_HNPEN) { - if (isp->phy.otg->gadget->b_hnp_enable) { - isp->phy.state = OTG_STATE_B_WAIT_ACON; - pr_debug(" --> b_wait_acon\n"); - } - goto pulldown; - } -pullup: - set |= OTG1_DP_PULLUP; - clr |= OTG1_DP_PULLDOWN; - break; - case OTG_STATE_A_SUSPEND: - case OTG_STATE_A_PERIPHERAL: - if (otg_ctrl & OTG_PULLUP) - goto pullup; - /* FALLTHROUGH */ - // case OTG_STATE_B_WAIT_ACON: - default: -pulldown: - set |= OTG1_DP_PULLDOWN; - clr |= OTG1_DP_PULLUP; - break; - } - -# define toggle(OTG,ISP) do { \ - if (otg_ctrl & OTG) set |= ISP; \ - else clr |= ISP; \ - } while (0) - - if (!(isp->phy.otg->host)) - otg_ctrl &= ~OTG_DRV_VBUS; - - switch (isp->phy.state) { - case OTG_STATE_A_SUSPEND: - if (otg_ctrl & OTG_DRV_VBUS) { - set |= OTG1_VBUS_DRV; - break; - } - /* HNP failed for some reason (A_AIDL_BDIS timeout) */ - notresponding(isp); - - /* FALLTHROUGH */ - case OTG_STATE_A_VBUS_ERR: - isp->phy.state = OTG_STATE_A_WAIT_VFALL; - pr_debug(" --> a_wait_vfall\n"); - /* FALLTHROUGH */ - case OTG_STATE_A_WAIT_VFALL: - /* FIXME usbcore thinks port power is still on ... */ - clr |= OTG1_VBUS_DRV; - break; - case OTG_STATE_A_IDLE: - if (otg_ctrl & OTG_DRV_VBUS) { - isp->phy.state = OTG_STATE_A_WAIT_VRISE; - pr_debug(" --> a_wait_vrise\n"); - } - /* FALLTHROUGH */ - default: - toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV); - } - - toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG); - toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG); - -# undef toggle - - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr); - - /* HNP switch to host or peripheral; and SRP */ - if (otg_change & OTG_PULLUP) { - u32 l; - - switch (isp->phy.state) { - case OTG_STATE_B_IDLE: - if (clr & OTG1_DP_PULLUP) - break; - isp->phy.state = OTG_STATE_B_PERIPHERAL; - pr_debug(" --> b_peripheral\n"); - break; - case OTG_STATE_A_SUSPEND: - if (clr & OTG1_DP_PULLUP) - break; - isp->phy.state = OTG_STATE_A_PERIPHERAL; - pr_debug(" --> a_peripheral\n"); - break; - default: - break; - } - l = omap_readl(OTG_CTRL); - l |= OTG_PULLUP; - omap_writel(l, OTG_CTRL); - } - - check_state(isp, __func__); - dump_regs(isp, "otg->isp1301"); -} - -static irqreturn_t omap_otg_irq(int irq, void *_isp) -{ - u16 otg_irq = omap_readw(OTG_IRQ_SRC); - u32 otg_ctrl; - int ret = IRQ_NONE; - struct isp1301 *isp = _isp; - struct usb_otg *otg = isp->phy.otg; - - /* update ISP1301 transceiver from OTG controller */ - if (otg_irq & OPRT_CHG) { - omap_writew(OPRT_CHG, OTG_IRQ_SRC); - isp1301_defer_work(isp, WORK_UPDATE_ISP); - ret = IRQ_HANDLED; - - /* SRP to become b_peripheral failed */ - } else if (otg_irq & B_SRP_TMROUT) { - pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL)); - notresponding(isp); - - /* gadget drivers that care should monitor all kinds of - * remote wakeup (SRP, normal) using their own timer - * to give "check cable and A-device" messages. - */ - if (isp->phy.state == OTG_STATE_B_SRP_INIT) - b_idle(isp, "srp_timeout"); - - omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* HNP to become b_host failed */ - } else if (otg_irq & B_HNP_FAIL) { - pr_debug("otg: %s B_HNP_FAIL, %06x\n", - state_name(isp), omap_readl(OTG_CTRL)); - notresponding(isp); - - otg_ctrl = omap_readl(OTG_CTRL); - otg_ctrl |= OTG_BUSDROP; - otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl, OTG_CTRL); - - /* subset of b_peripheral()... */ - isp->phy.state = OTG_STATE_B_PERIPHERAL; - pr_debug(" --> b_peripheral\n"); - - omap_writew(B_HNP_FAIL, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* detect SRP from B-device ... */ - } else if (otg_irq & A_SRP_DETECT) { - pr_debug("otg: %s SRP_DETECT, %06x\n", - state_name(isp), omap_readl(OTG_CTRL)); - - isp1301_defer_work(isp, WORK_UPDATE_OTG); - switch (isp->phy.state) { - case OTG_STATE_A_IDLE: - if (!otg->host) - break; - isp1301_defer_work(isp, WORK_HOST_RESUME); - otg_ctrl = omap_readl(OTG_CTRL); - otg_ctrl |= OTG_A_BUSREQ; - otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) - & ~OTG_XCEIV_INPUTS - & OTG_CTRL_MASK; - omap_writel(otg_ctrl, OTG_CTRL); - break; - default: - break; - } - - omap_writew(A_SRP_DETECT, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise) - * we don't track them separately - */ - } else if (otg_irq & A_REQ_TMROUT) { - otg_ctrl = omap_readl(OTG_CTRL); - pr_info("otg: BCON_TMOUT from %s, %06x\n", - state_name(isp), otg_ctrl); - notresponding(isp); - - otg_ctrl |= OTG_BUSDROP; - otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl, OTG_CTRL); - isp->phy.state = OTG_STATE_A_WAIT_VFALL; - - omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* A-supplied voltage fell too low; overcurrent */ - } else if (otg_irq & A_VBUS_ERR) { - otg_ctrl = omap_readl(OTG_CTRL); - printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n", - state_name(isp), otg_irq, otg_ctrl); - - otg_ctrl |= OTG_BUSDROP; - otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl, OTG_CTRL); - isp->phy.state = OTG_STATE_A_VBUS_ERR; - - omap_writew(A_VBUS_ERR, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - /* switch driver; the transceiver code activates it, - * ungating the udc clock or resuming OHCI. - */ - } else if (otg_irq & DRIVER_SWITCH) { - int kick = 0; - - otg_ctrl = omap_readl(OTG_CTRL); - printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n", - state_name(isp), - (otg_ctrl & OTG_DRIVER_SEL) - ? "gadget" : "host", - otg_ctrl); - isp1301_defer_work(isp, WORK_UPDATE_ISP); - - /* role is peripheral */ - if (otg_ctrl & OTG_DRIVER_SEL) { - switch (isp->phy.state) { - case OTG_STATE_A_IDLE: - b_idle(isp, __func__); - break; - default: - break; - } - isp1301_defer_work(isp, WORK_UPDATE_ISP); - - /* role is host */ - } else { - if (!(otg_ctrl & OTG_ID)) { - otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; - omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL); - } - - if (otg->host) { - switch (isp->phy.state) { - case OTG_STATE_B_WAIT_ACON: - isp->phy.state = OTG_STATE_B_HOST; - pr_debug(" --> b_host\n"); - kick = 1; - break; - case OTG_STATE_A_WAIT_BCON: - isp->phy.state = OTG_STATE_A_HOST; - pr_debug(" --> a_host\n"); - break; - case OTG_STATE_A_PERIPHERAL: - isp->phy.state = OTG_STATE_A_WAIT_BCON; - pr_debug(" --> a_wait_bcon\n"); - break; - default: - break; - } - isp1301_defer_work(isp, WORK_HOST_RESUME); - } - } - - omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC); - ret = IRQ_HANDLED; - - if (kick) - usb_bus_start_enum(otg->host, otg->host->otg_port); - } - - check_state(isp, __func__); - return ret; -} - -static struct platform_device *otg_dev; - -static int isp1301_otg_init(struct isp1301 *isp) -{ - u32 l; - - if (!otg_dev) - return -ENODEV; - - dump_regs(isp, __func__); - /* some of these values are board-specific... */ - l = omap_readl(OTG_SYSCON_2); - l |= OTG_EN - /* for B-device: */ - | SRP_GPDATA /* 9msec Bdev D+ pulse */ - | SRP_GPDVBUS /* discharge after VBUS pulse */ - // | (3 << 24) /* 2msec VBUS pulse */ - /* for A-device: */ - | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */ - | SRP_DPW /* detect 167+ns SRP pulses */ - | SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */ - ; - omap_writel(l, OTG_SYSCON_2); - - update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); - update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); - - check_state(isp, __func__); - pr_debug("otg: %s, %s %06x\n", - state_name(isp), __func__, omap_readl(OTG_CTRL)); - - omap_writew(DRIVER_SWITCH | OPRT_CHG - | B_SRP_TMROUT | B_HNP_FAIL - | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN); - - l = omap_readl(OTG_SYSCON_2); - l |= OTG_EN; - omap_writel(l, OTG_SYSCON_2); - - return 0; -} - -static int otg_probe(struct platform_device *dev) -{ - // struct omap_usb_config *config = dev->platform_data; - - otg_dev = dev; - return 0; -} - -static int otg_remove(struct platform_device *dev) -{ - otg_dev = NULL; - return 0; -} - -static struct platform_driver omap_otg_driver = { - .probe = otg_probe, - .remove = otg_remove, - .driver = { - .owner = THIS_MODULE, - .name = "omap_otg", - }, -}; - -static int otg_bind(struct isp1301 *isp) -{ - int status; - - if (otg_dev) - return -EBUSY; - - status = platform_driver_register(&omap_otg_driver); - if (status < 0) - return status; - - if (otg_dev) - status = request_irq(otg_dev->resource[1].start, omap_otg_irq, - 0, DRIVER_NAME, isp); - else - status = -ENODEV; - - if (status < 0) - platform_driver_unregister(&omap_otg_driver); - return status; -} - -static void otg_unbind(struct isp1301 *isp) -{ - if (!otg_dev) - return; - free_irq(otg_dev->resource[1].start, isp); -} - -#else - -/* OTG controller isn't clocked */ - -#endif /* CONFIG_USB_OTG */ - -/*-------------------------------------------------------------------------*/ - -static void b_peripheral(struct isp1301 *isp) -{ - u32 l; - - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - - usb_gadget_vbus_connect(isp->phy.otg->gadget); - -#ifdef CONFIG_USB_OTG - enable_vbus_draw(isp, 8); - otg_update_isp(isp); -#else - enable_vbus_draw(isp, 100); - /* UDC driver just set OTG_BSESSVLD */ - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN); - isp->phy.state = OTG_STATE_B_PERIPHERAL; - pr_debug(" --> b_peripheral\n"); - dump_regs(isp, "2periph"); -#endif -} - -static void isp_update_otg(struct isp1301 *isp, u8 stat) -{ - struct usb_otg *otg = isp->phy.otg; - u8 isp_stat, isp_bstat; - enum usb_otg_state state = isp->phy.state; - - if (stat & INTR_BDIS_ACON) - pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp)); - - /* start certain state transitions right away */ - isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); - if (isp_stat & INTR_ID_GND) { - if (otg->default_a) { - switch (state) { - case OTG_STATE_B_IDLE: - a_idle(isp, "idle"); - /* FALLTHROUGH */ - case OTG_STATE_A_IDLE: - enable_vbus_source(isp); - /* FALLTHROUGH */ - case OTG_STATE_A_WAIT_VRISE: - /* we skip over OTG_STATE_A_WAIT_BCON, since - * the HC will transition to A_HOST (or - * A_SUSPEND!) without our noticing except - * when HNP is used. - */ - if (isp_stat & INTR_VBUS_VLD) - isp->phy.state = OTG_STATE_A_HOST; - break; - case OTG_STATE_A_WAIT_VFALL: - if (!(isp_stat & INTR_SESS_VLD)) - a_idle(isp, "vfell"); - break; - default: - if (!(isp_stat & INTR_VBUS_VLD)) - isp->phy.state = OTG_STATE_A_VBUS_ERR; - break; - } - isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); - } else { - switch (state) { - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_HOST: - case OTG_STATE_B_WAIT_ACON: - usb_gadget_vbus_disconnect(otg->gadget); - break; - default: - break; - } - if (state != OTG_STATE_A_IDLE) - a_idle(isp, "id"); - if (otg->host && state == OTG_STATE_A_IDLE) - isp1301_defer_work(isp, WORK_HOST_RESUME); - isp_bstat = 0; - } - } else { - u32 l; - - /* if user unplugged mini-A end of cable, - * don't bypass A_WAIT_VFALL. - */ - if (otg->default_a) { - switch (state) { - default: - isp->phy.state = OTG_STATE_A_WAIT_VFALL; - break; - case OTG_STATE_A_WAIT_VFALL: - state = OTG_STATE_A_IDLE; - /* khubd may take a while to notice and - * handle this disconnect, so don't go - * to B_IDLE quite yet. - */ - break; - case OTG_STATE_A_IDLE: - host_suspend(isp); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, - MC1_BDIS_ACON_EN); - isp->phy.state = OTG_STATE_B_IDLE; - l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - l &= ~OTG_CTRL_BITS; - omap_writel(l, OTG_CTRL); - break; - case OTG_STATE_B_IDLE: - break; - } - } - isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); - - switch (isp->phy.state) { - case OTG_STATE_B_PERIPHERAL: - case OTG_STATE_B_WAIT_ACON: - case OTG_STATE_B_HOST: - if (likely(isp_bstat & OTG_B_SESS_VLD)) - break; - enable_vbus_draw(isp, 0); -#ifndef CONFIG_USB_OTG - /* UDC driver will clear OTG_BSESSVLD */ - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, - OTG1_DP_PULLDOWN); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, - OTG1_DP_PULLUP); - dump_regs(isp, __func__); -#endif - /* FALLTHROUGH */ - case OTG_STATE_B_SRP_INIT: - b_idle(isp, __func__); - l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; - omap_writel(l, OTG_CTRL); - /* FALLTHROUGH */ - case OTG_STATE_B_IDLE: - if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) { -#ifdef CONFIG_USB_OTG - update_otg1(isp, isp_stat); - update_otg2(isp, isp_bstat); -#endif - b_peripheral(isp); - } else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD))) - isp_bstat |= OTG_B_SESS_END; - break; - case OTG_STATE_A_WAIT_VFALL: - break; - default: - pr_debug("otg: unsupported b-device %s\n", - state_name(isp)); - break; - } - } - - if (state != isp->phy.state) - pr_debug(" isp, %s -> %s\n", - usb_otg_state_string(state), state_name(isp)); - -#ifdef CONFIG_USB_OTG - /* update the OTG controller state to match the isp1301; may - * trigger OPRT_CHG irqs for changes going to the isp1301. - */ - update_otg1(isp, isp_stat); - update_otg2(isp, isp_bstat); - check_state(isp, __func__); -#endif - - dump_regs(isp, "isp1301->otg"); -} - -/*-------------------------------------------------------------------------*/ - -static u8 isp1301_clear_latch(struct isp1301 *isp) -{ - u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch); - return latch; -} - -static void -isp1301_work(struct work_struct *work) -{ - struct isp1301 *isp = container_of(work, struct isp1301, work); - int stop; - - /* implicit lock: we're the only task using this device */ - isp->working = 1; - do { - stop = test_bit(WORK_STOP, &isp->todo); - -#ifdef CONFIG_USB_OTG - /* transfer state from otg engine to isp1301 */ - if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) { - otg_update_isp(isp); - put_device(&isp->client->dev); - } -#endif - /* transfer state from isp1301 to otg engine */ - if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) { - u8 stat = isp1301_clear_latch(isp); - - isp_update_otg(isp, stat); - put_device(&isp->client->dev); - } - - if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) { - u32 otg_ctrl; - - /* - * skip A_WAIT_VRISE; hc transitions invisibly - * skip A_WAIT_BCON; same. - */ - switch (isp->phy.state) { - case OTG_STATE_A_WAIT_BCON: - case OTG_STATE_A_WAIT_VRISE: - isp->phy.state = OTG_STATE_A_HOST; - pr_debug(" --> a_host\n"); - otg_ctrl = omap_readl(OTG_CTRL); - otg_ctrl |= OTG_A_BUSREQ; - otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) - & OTG_CTRL_MASK; - omap_writel(otg_ctrl, OTG_CTRL); - break; - case OTG_STATE_B_WAIT_ACON: - isp->phy.state = OTG_STATE_B_HOST; - pr_debug(" --> b_host (acon)\n"); - break; - case OTG_STATE_B_HOST: - case OTG_STATE_B_IDLE: - case OTG_STATE_A_IDLE: - break; - default: - pr_debug(" host resume in %s\n", - state_name(isp)); - } - host_resume(isp); - // mdelay(10); - put_device(&isp->client->dev); - } - - if (test_and_clear_bit(WORK_TIMER, &isp->todo)) { -#ifdef VERBOSE - dump_regs(isp, "timer"); - if (!stop) - mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); -#endif - put_device(&isp->client->dev); - } - - if (isp->todo) - dev_vdbg(&isp->client->dev, - "work done, todo = 0x%lx\n", - isp->todo); - if (stop) { - dev_dbg(&isp->client->dev, "stop\n"); - break; - } - } while (isp->todo); - isp->working = 0; -} - -static irqreturn_t isp1301_irq(int irq, void *isp) -{ - isp1301_defer_work(isp, WORK_UPDATE_OTG); - return IRQ_HANDLED; -} - -static void isp1301_timer(unsigned long _isp) -{ - isp1301_defer_work((void *)_isp, WORK_TIMER); -} - -/*-------------------------------------------------------------------------*/ - -static void isp1301_release(struct device *dev) -{ - struct isp1301 *isp; - - isp = dev_get_drvdata(dev); - - /* FIXME -- not with a "new style" driver, it doesn't!! */ - - /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ - if (isp->i2c_release) - isp->i2c_release(dev); - kfree(isp->phy.otg); - kfree (isp); -} - -static struct isp1301 *the_transceiver; - -static int __exit isp1301_remove(struct i2c_client *i2c) -{ - struct isp1301 *isp; - - isp = i2c_get_clientdata(i2c); - - isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); - free_irq(i2c->irq, isp); -#ifdef CONFIG_USB_OTG - otg_unbind(isp); -#endif - if (machine_is_omap_h2()) - gpio_free(2); - - isp->timer.data = 0; - set_bit(WORK_STOP, &isp->todo); - del_timer_sync(&isp->timer); - flush_work(&isp->work); - - put_device(&i2c->dev); - the_transceiver = NULL; - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* NOTE: three modes are possible here, only one of which - * will be standards-conformant on any given system: - * - * - OTG mode (dual-role), required if there's a Mini-AB connector - * - HOST mode, for when there's one or more A (host) connectors - * - DEVICE mode, for when there's a B/Mini-B (device) connector - * - * As a rule, you won't have an isp1301 chip unless it's there to - * support the OTG mode. Other modes help testing USB controllers - * in isolation from (full) OTG support, or maybe so later board - * revisions can help to support those feature. - */ - -#ifdef CONFIG_USB_OTG - -static int isp1301_otg_enable(struct isp1301 *isp) -{ - power_up(isp); - isp1301_otg_init(isp); - - /* NOTE: since we don't change this, this provides - * a few more interrupts than are strictly needed. - */ - isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); - isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); - - dev_info(&isp->client->dev, "ready for dual-role USB ...\n"); - - return 0; -} - -#endif - -/* add or disable the host device+driver */ -static int -isp1301_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); - - if (!otg || isp != the_transceiver) - return -ENODEV; - - if (!host) { - omap_writew(0, OTG_IRQ_EN); - power_down(isp); - otg->host = NULL; - return 0; - } - -#ifdef CONFIG_USB_OTG - otg->host = host; - dev_dbg(&isp->client->dev, "registered host\n"); - host_suspend(isp); - if (otg->gadget) - return isp1301_otg_enable(isp); - return 0; - -#elif !defined(CONFIG_USB_GADGET_OMAP) - // FIXME update its refcount - otg->host = host; - - power_up(isp); - - if (machine_is_omap_h2()) - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); - - dev_info(&isp->client->dev, "A-Host sessions ok\n"); - isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_ID_GND); - isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_ID_GND); - - /* If this has a Mini-AB connector, this mode is highly - * nonstandard ... but can be handy for testing, especially with - * the Mini-A end of an OTG cable. (Or something nonstandard - * like MiniB-to-StandardB, maybe built with a gender mender.) - */ - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV); - - dump_regs(isp, __func__); - - return 0; - -#else - dev_dbg(&isp->client->dev, "host sessions not allowed\n"); - return -EINVAL; -#endif - -} - -static int -isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) -{ - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); - - if (!otg || isp != the_transceiver) - return -ENODEV; - - if (!gadget) { - omap_writew(0, OTG_IRQ_EN); - if (!otg->default_a) - enable_vbus_draw(isp, 0); - usb_gadget_vbus_disconnect(otg->gadget); - otg->gadget = NULL; - power_down(isp); - return 0; - } - -#ifdef CONFIG_USB_OTG - otg->gadget = gadget; - dev_dbg(&isp->client->dev, "registered gadget\n"); - /* gadget driver may be suspended until vbus_connect () */ - if (otg->host) - return isp1301_otg_enable(isp); - return 0; - -#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE) - otg->gadget = gadget; - // FIXME update its refcount - - { - u32 l; - - l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; - l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS); - l |= OTG_ID; - omap_writel(l, OTG_CTRL); - } - - power_up(isp); - isp->phy.state = OTG_STATE_B_IDLE; - - if (machine_is_omap_h2() || machine_is_omap_h3()) - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); - - isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, - INTR_SESS_VLD); - isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, - INTR_VBUS_VLD); - dev_info(&isp->client->dev, "B-Peripheral sessions ok\n"); - dump_regs(isp, __func__); - - /* If this has a Mini-AB connector, this mode is highly - * nonstandard ... but can be handy for testing, so long - * as you don't plug a Mini-A cable into the jack. - */ - if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD) - b_peripheral(isp); - - return 0; - -#else - dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n"); - return -EINVAL; -#endif -} - - -/*-------------------------------------------------------------------------*/ - -static int -isp1301_set_power(struct usb_phy *dev, unsigned mA) -{ - if (!the_transceiver) - return -ENODEV; - if (dev->state == OTG_STATE_B_PERIPHERAL) - enable_vbus_draw(the_transceiver, mA); - return 0; -} - -static int -isp1301_start_srp(struct usb_otg *otg) -{ - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); - u32 otg_ctrl; - - if (!otg || isp != the_transceiver - || isp->phy.state != OTG_STATE_B_IDLE) - return -ENODEV; - - otg_ctrl = omap_readl(OTG_CTRL); - if (!(otg_ctrl & OTG_BSESSEND)) - return -EINVAL; - - otg_ctrl |= OTG_B_BUSREQ; - otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK; - omap_writel(otg_ctrl, OTG_CTRL); - isp->phy.state = OTG_STATE_B_SRP_INIT; - - pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), - omap_readl(OTG_CTRL)); -#ifdef CONFIG_USB_OTG - check_state(isp, __func__); -#endif - return 0; -} - -static int -isp1301_start_hnp(struct usb_otg *otg) -{ -#ifdef CONFIG_USB_OTG - struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); - u32 l; - - if (!otg || isp != the_transceiver) - return -ENODEV; - if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable)) - return -ENOTCONN; - if (!otg->default_a && (otg->gadget == NULL - || !otg->gadget->b_hnp_enable)) - return -ENOTCONN; - - /* We want hardware to manage most HNP protocol timings. - * So do this part as early as possible... - */ - switch (isp->phy.state) { - case OTG_STATE_B_HOST: - isp->phy.state = OTG_STATE_B_PERIPHERAL; - /* caller will suspend next */ - break; - case OTG_STATE_A_HOST: -#if 0 - /* autoconnect mode avoids irq latency bugs */ - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, - MC1_BDIS_ACON_EN); -#endif - /* caller must suspend then clear A_BUSREQ */ - usb_gadget_vbus_connect(otg->gadget); - l = omap_readl(OTG_CTRL); - l |= OTG_A_SETB_HNPEN; - omap_writel(l, OTG_CTRL); - - break; - case OTG_STATE_A_PERIPHERAL: - /* initiated by B-Host suspend */ - break; - default: - return -EILSEQ; - } - pr_debug("otg: HNP %s, %06x ...\n", - state_name(isp), omap_readl(OTG_CTRL)); - check_state(isp, __func__); - return 0; -#else - /* srp-only */ - return -EINVAL; -#endif -} - -/*-------------------------------------------------------------------------*/ - -static int -isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) -{ - int status; - struct isp1301 *isp; - - if (the_transceiver) - return 0; - - isp = kzalloc(sizeof *isp, GFP_KERNEL); - if (!isp) - return 0; - - isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL); - if (!isp->phy.otg) { - kfree(isp); - return 0; - } - - INIT_WORK(&isp->work, isp1301_work); - init_timer(&isp->timer); - isp->timer.function = isp1301_timer; - isp->timer.data = (unsigned long) isp; - - i2c_set_clientdata(i2c, isp); - isp->client = i2c; - - /* verify the chip (shouldn't be necessary) */ - status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); - if (status != I2C_VENDOR_ID_PHILIPS) { - dev_dbg(&i2c->dev, "not philips id: %d\n", status); - goto fail; - } - status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); - if (status != I2C_PRODUCT_ID_PHILIPS_1301) { - dev_dbg(&i2c->dev, "not isp1301, %d\n", status); - goto fail; - } - isp->i2c_release = i2c->dev.release; - i2c->dev.release = isp1301_release; - - /* initial development used chiprev 2.00 */ - status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE); - dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n", - status >> 8, status & 0xff); - - /* make like power-on reset */ - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK); - - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI); - isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI); - - isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, - OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); - isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, - ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); - - isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); - isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); - -#ifdef CONFIG_USB_OTG - status = otg_bind(isp); - if (status < 0) { - dev_dbg(&i2c->dev, "can't bind OTG\n"); - goto fail; - } -#endif - - if (machine_is_omap_h2()) { - /* full speed signaling by default */ - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, - MC1_SPEED); - isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, - MC2_SPD_SUSP_CTRL); - - /* IRQ wired at M14 */ - omap_cfg_reg(M14_1510_GPIO2); - if (gpio_request(2, "isp1301") == 0) - gpio_direction_input(2); - isp->irq_type = IRQF_TRIGGER_FALLING; - } - - status = request_irq(i2c->irq, isp1301_irq, - isp->irq_type, DRIVER_NAME, isp); - if (status < 0) { - dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", - i2c->irq, status); - goto fail; - } - - isp->phy.dev = &i2c->dev; - isp->phy.label = DRIVER_NAME; - isp->phy.set_power = isp1301_set_power, - - isp->phy.otg->phy = &isp->phy; - isp->phy.otg->set_host = isp1301_set_host, - isp->phy.otg->set_peripheral = isp1301_set_peripheral, - isp->phy.otg->start_srp = isp1301_start_srp, - isp->phy.otg->start_hnp = isp1301_start_hnp, - - enable_vbus_draw(isp, 0); - power_down(isp); - the_transceiver = isp; - -#ifdef CONFIG_USB_OTG - update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); - update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); -#endif - - dump_regs(isp, __func__); - -#ifdef VERBOSE - mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); - dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES); -#endif - - status = usb_add_phy(&isp->phy, USB_PHY_TYPE_USB2); - if (status < 0) - dev_err(&i2c->dev, "can't register transceiver, %d\n", - status); - - return 0; - -fail: - kfree(isp->phy.otg); - kfree(isp); - return -ENODEV; -} - -static const struct i2c_device_id isp1301_id[] = { - { "isp1301_omap", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, isp1301_id); - -static struct i2c_driver isp1301_driver = { - .driver = { - .name = "isp1301_omap", - }, - .probe = isp1301_probe, - .remove = __exit_p(isp1301_remove), - .id_table = isp1301_id, -}; - -/*-------------------------------------------------------------------------*/ - -static int __init isp_init(void) -{ - return i2c_add_driver(&isp1301_driver); -} -subsys_initcall(isp_init); - -static void __exit isp_exit(void) -{ - if (the_transceiver) - usb_remove_phy(&the_transceiver->phy); - i2c_del_driver(&isp1301_driver); -} -module_exit(isp_exit); - diff --git a/drivers/usb/phy/msm_otg.c b/drivers/usb/phy/msm_otg.c deleted file mode 100644 index 749fbf4..0000000 --- a/drivers/usb/phy/msm_otg.c +++ /dev/null @@ -1,1762 +0,0 @@ -/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 and - * only version 2 as published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA - * 02110-1301, USA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#define MSM_USB_BASE (motg->regs) -#define DRIVER_NAME "msm_otg" - -#define ULPI_IO_TIMEOUT_USEC (10 * 1000) - -#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ -#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ -#define USB_PHY_3P3_HPM_LOAD 50000 /* uA */ -#define USB_PHY_3P3_LPM_LOAD 4000 /* uA */ - -#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */ -#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */ -#define USB_PHY_1P8_HPM_LOAD 50000 /* uA */ -#define USB_PHY_1P8_LPM_LOAD 4000 /* uA */ - -#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ -#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ - -static struct regulator *hsusb_3p3; -static struct regulator *hsusb_1p8; -static struct regulator *hsusb_vddcx; - -static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) -{ - int ret = 0; - - if (init) { - hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX"); - if (IS_ERR(hsusb_vddcx)) { - dev_err(motg->phy.dev, "unable to get hsusb vddcx\n"); - return PTR_ERR(hsusb_vddcx); - } - - ret = regulator_set_voltage(hsusb_vddcx, - USB_PHY_VDD_DIG_VOL_MIN, - USB_PHY_VDD_DIG_VOL_MAX); - if (ret) { - dev_err(motg->phy.dev, "unable to set the voltage " - "for hsusb vddcx\n"); - regulator_put(hsusb_vddcx); - return ret; - } - - ret = regulator_enable(hsusb_vddcx); - if (ret) { - dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); - regulator_put(hsusb_vddcx); - } - } else { - ret = regulator_set_voltage(hsusb_vddcx, 0, - USB_PHY_VDD_DIG_VOL_MAX); - if (ret) - dev_err(motg->phy.dev, "unable to set the voltage " - "for hsusb vddcx\n"); - ret = regulator_disable(hsusb_vddcx); - if (ret) - dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); - - regulator_put(hsusb_vddcx); - } - - return ret; -} - -static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) -{ - int rc = 0; - - if (init) { - hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3"); - if (IS_ERR(hsusb_3p3)) { - dev_err(motg->phy.dev, "unable to get hsusb 3p3\n"); - return PTR_ERR(hsusb_3p3); - } - - rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN, - USB_PHY_3P3_VOL_MAX); - if (rc) { - dev_err(motg->phy.dev, "unable to set voltage level " - "for hsusb 3p3\n"); - goto put_3p3; - } - rc = regulator_enable(hsusb_3p3); - if (rc) { - dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n"); - goto put_3p3; - } - hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8"); - if (IS_ERR(hsusb_1p8)) { - dev_err(motg->phy.dev, "unable to get hsusb 1p8\n"); - rc = PTR_ERR(hsusb_1p8); - goto disable_3p3; - } - rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN, - USB_PHY_1P8_VOL_MAX); - if (rc) { - dev_err(motg->phy.dev, "unable to set voltage level " - "for hsusb 1p8\n"); - goto put_1p8; - } - rc = regulator_enable(hsusb_1p8); - if (rc) { - dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n"); - goto put_1p8; - } - - return 0; - } - - regulator_disable(hsusb_1p8); -put_1p8: - regulator_put(hsusb_1p8); -disable_3p3: - regulator_disable(hsusb_3p3); -put_3p3: - regulator_put(hsusb_3p3); - return rc; -} - -#ifdef CONFIG_PM_SLEEP -#define USB_PHY_SUSP_DIG_VOL 500000 -static int msm_hsusb_config_vddcx(int high) -{ - int max_vol = USB_PHY_VDD_DIG_VOL_MAX; - int min_vol; - int ret; - - if (high) - min_vol = USB_PHY_VDD_DIG_VOL_MIN; - else - min_vol = USB_PHY_SUSP_DIG_VOL; - - ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); - if (ret) { - pr_err("%s: unable to set the voltage for regulator " - "HSUSB_VDDCX\n", __func__); - return ret; - } - - pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); - - return ret; -} -#endif - -static int msm_hsusb_ldo_set_mode(int on) -{ - int ret = 0; - - if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) { - pr_err("%s: HSUSB_1p8 is not initialized\n", __func__); - return -ENODEV; - } - - if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) { - pr_err("%s: HSUSB_3p3 is not initialized\n", __func__); - return -ENODEV; - } - - if (on) { - ret = regulator_set_optimum_mode(hsusb_1p8, - USB_PHY_1P8_HPM_LOAD); - if (ret < 0) { - pr_err("%s: Unable to set HPM of the regulator " - "HSUSB_1p8\n", __func__); - return ret; - } - ret = regulator_set_optimum_mode(hsusb_3p3, - USB_PHY_3P3_HPM_LOAD); - if (ret < 0) { - pr_err("%s: Unable to set HPM of the regulator " - "HSUSB_3p3\n", __func__); - regulator_set_optimum_mode(hsusb_1p8, - USB_PHY_1P8_LPM_LOAD); - return ret; - } - } else { - ret = regulator_set_optimum_mode(hsusb_1p8, - USB_PHY_1P8_LPM_LOAD); - if (ret < 0) - pr_err("%s: Unable to set LPM of the regulator " - "HSUSB_1p8\n", __func__); - ret = regulator_set_optimum_mode(hsusb_3p3, - USB_PHY_3P3_LPM_LOAD); - if (ret < 0) - pr_err("%s: Unable to set LPM of the regulator " - "HSUSB_3p3\n", __func__); - } - - pr_debug("reg (%s)\n", on ? "HPM" : "LPM"); - return ret < 0 ? ret : 0; -} - -static int ulpi_read(struct usb_phy *phy, u32 reg) -{ - struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - int cnt = 0; - - /* initiate read operation */ - writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), - USB_ULPI_VIEWPORT); - - /* wait for completion */ - while (cnt < ULPI_IO_TIMEOUT_USEC) { - if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) - break; - udelay(1); - cnt++; - } - - if (cnt >= ULPI_IO_TIMEOUT_USEC) { - dev_err(phy->dev, "ulpi_read: timeout %08x\n", - readl(USB_ULPI_VIEWPORT)); - return -ETIMEDOUT; - } - return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT)); -} - -static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg) -{ - struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - int cnt = 0; - - /* initiate write operation */ - writel(ULPI_RUN | ULPI_WRITE | - ULPI_ADDR(reg) | ULPI_DATA(val), - USB_ULPI_VIEWPORT); - - /* wait for completion */ - while (cnt < ULPI_IO_TIMEOUT_USEC) { - if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) - break; - udelay(1); - cnt++; - } - - if (cnt >= ULPI_IO_TIMEOUT_USEC) { - dev_err(phy->dev, "ulpi_write: timeout\n"); - return -ETIMEDOUT; - } - return 0; -} - -static struct usb_phy_io_ops msm_otg_io_ops = { - .read = ulpi_read, - .write = ulpi_write, -}; - -static void ulpi_init(struct msm_otg *motg) -{ - struct msm_otg_platform_data *pdata = motg->pdata; - int *seq = pdata->phy_init_seq; - - if (!seq) - return; - - while (seq[0] >= 0) { - dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n", - seq[0], seq[1]); - ulpi_write(&motg->phy, seq[0], seq[1]); - seq += 2; - } -} - -static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) -{ - int ret; - - if (assert) { - ret = clk_reset(motg->clk, CLK_RESET_ASSERT); - if (ret) - dev_err(motg->phy.dev, "usb hs_clk assert failed\n"); - } else { - ret = clk_reset(motg->clk, CLK_RESET_DEASSERT); - if (ret) - dev_err(motg->phy.dev, "usb hs_clk deassert failed\n"); - } - return ret; -} - -static int msm_otg_phy_clk_reset(struct msm_otg *motg) -{ - int ret; - - ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT); - if (ret) { - dev_err(motg->phy.dev, "usb phy clk assert failed\n"); - return ret; - } - usleep_range(10000, 12000); - ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT); - if (ret) - dev_err(motg->phy.dev, "usb phy clk deassert failed\n"); - return ret; -} - -static int msm_otg_phy_reset(struct msm_otg *motg) -{ - u32 val; - int ret; - int retries; - - ret = msm_otg_link_clk_reset(motg, 1); - if (ret) - return ret; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - ret = msm_otg_link_clk_reset(motg, 0); - if (ret) - return ret; - - val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; - writel(val | PORTSC_PTS_ULPI, USB_PORTSC); - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, - ULPI_CLR(ULPI_FUNC_CTRL)); - if (!ret) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - - /* This reset calibrates the phy, if the above write succeeded */ - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - - for (retries = 3; retries > 0; retries--) { - ret = ulpi_read(&motg->phy, ULPI_DEBUG); - if (ret != -ETIMEDOUT) - break; - ret = msm_otg_phy_clk_reset(motg); - if (ret) - return ret; - } - if (!retries) - return -ETIMEDOUT; - - dev_info(motg->phy.dev, "phy_reset: success\n"); - return 0; -} - -#define LINK_RESET_TIMEOUT_USEC (250 * 1000) -static int msm_otg_reset(struct usb_phy *phy) -{ - struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - struct msm_otg_platform_data *pdata = motg->pdata; - int cnt = 0; - int ret; - u32 val = 0; - u32 ulpi_val = 0; - - ret = msm_otg_phy_reset(motg); - if (ret) { - dev_err(phy->dev, "phy_reset failed\n"); - return ret; - } - - ulpi_init(motg); - - writel(USBCMD_RESET, USB_USBCMD); - while (cnt < LINK_RESET_TIMEOUT_USEC) { - if (!(readl(USB_USBCMD) & USBCMD_RESET)) - break; - udelay(1); - cnt++; - } - if (cnt >= LINK_RESET_TIMEOUT_USEC) - return -ETIMEDOUT; - - /* select ULPI phy */ - writel(0x80000000, USB_PORTSC); - - msleep(100); - - writel(0x0, USB_AHBBURST); - writel(0x00, USB_AHBMODE); - - if (pdata->otg_control == OTG_PHY_CONTROL) { - val = readl(USB_OTGSC); - if (pdata->mode == USB_OTG) { - ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID; - val |= OTGSC_IDIE | OTGSC_BSVIE; - } else if (pdata->mode == USB_PERIPHERAL) { - ulpi_val = ULPI_INT_SESS_VALID; - val |= OTGSC_BSVIE; - } - writel(val, USB_OTGSC); - ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE); - ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); - } - - return 0; -} - -#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) -#define PHY_RESUME_TIMEOUT_USEC (100 * 1000) - -#ifdef CONFIG_PM_SLEEP -static int msm_otg_suspend(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - struct usb_bus *bus = phy->otg->host; - struct msm_otg_platform_data *pdata = motg->pdata; - int cnt = 0; - - if (atomic_read(&motg->in_lpm)) - return 0; - - disable_irq(motg->irq); - /* - * Chipidea 45-nm PHY suspend sequence: - * - * Interrupt Latch Register auto-clear feature is not present - * in all PHY versions. Latch register is clear on read type. - * Clear latch register to avoid spurious wakeup from - * low power mode (LPM). - * - * PHY comparators are disabled when PHY enters into low power - * mode (LPM). Keep PHY comparators ON in LPM only when we expect - * VBUS/Id notifications from USB PHY. Otherwise turn off USB - * PHY comparators. This save significant amount of power. - * - * PLL is not turned off when PHY enters into low power mode (LPM). - * Disable PLL for maximum power savings. - */ - - if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) { - ulpi_read(phy, 0x14); - if (pdata->otg_control == OTG_PHY_CONTROL) - ulpi_write(phy, 0x01, 0x30); - ulpi_write(phy, 0x08, 0x09); - } - - /* - * PHY may take some time or even fail to enter into low power - * mode (LPM). Hence poll for 500 msec and reset the PHY and link - * in failure case. - */ - writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); - while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { - if (readl(USB_PORTSC) & PORTSC_PHCD) - break; - udelay(1); - cnt++; - } - - if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) { - dev_err(phy->dev, "Unable to suspend PHY\n"); - msm_otg_reset(phy); - enable_irq(motg->irq); - return -ETIMEDOUT; - } - - /* - * PHY has capability to generate interrupt asynchronously in low - * power mode (LPM). This interrupt is level triggered. So USB IRQ - * line must be disabled till async interrupt enable bit is cleared - * in USBCMD register. Assert STP (ULPI interface STOP signal) to - * block data communication from PHY. - */ - writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD); - - if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && - motg->pdata->otg_control == OTG_PMIC_CONTROL) - writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL); - - clk_disable(motg->pclk); - clk_disable(motg->clk); - if (motg->core_clk) - clk_disable(motg->core_clk); - - if (!IS_ERR(motg->pclk_src)) - clk_disable(motg->pclk_src); - - if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && - motg->pdata->otg_control == OTG_PMIC_CONTROL) { - msm_hsusb_ldo_set_mode(0); - msm_hsusb_config_vddcx(0); - } - - if (device_may_wakeup(phy->dev)) - enable_irq_wake(motg->irq); - if (bus) - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); - - atomic_set(&motg->in_lpm, 1); - enable_irq(motg->irq); - - dev_info(phy->dev, "USB in low power mode\n"); - - return 0; -} - -static int msm_otg_resume(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - struct usb_bus *bus = phy->otg->host; - int cnt = 0; - unsigned temp; - - if (!atomic_read(&motg->in_lpm)) - return 0; - - if (!IS_ERR(motg->pclk_src)) - clk_enable(motg->pclk_src); - - clk_enable(motg->pclk); - clk_enable(motg->clk); - if (motg->core_clk) - clk_enable(motg->core_clk); - - if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && - motg->pdata->otg_control == OTG_PMIC_CONTROL) { - msm_hsusb_ldo_set_mode(1); - msm_hsusb_config_vddcx(1); - writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL); - } - - temp = readl(USB_USBCMD); - temp &= ~ASYNC_INTR_CTRL; - temp &= ~ULPI_STP_CTRL; - writel(temp, USB_USBCMD); - - /* - * PHY comes out of low power mode (LPM) in case of wakeup - * from asynchronous interrupt. - */ - if (!(readl(USB_PORTSC) & PORTSC_PHCD)) - goto skip_phy_resume; - - writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC); - while (cnt < PHY_RESUME_TIMEOUT_USEC) { - if (!(readl(USB_PORTSC) & PORTSC_PHCD)) - break; - udelay(1); - cnt++; - } - - if (cnt >= PHY_RESUME_TIMEOUT_USEC) { - /* - * This is a fatal error. Reset the link and - * PHY. USB state can not be restored. Re-insertion - * of USB cable is the only way to get USB working. - */ - dev_err(phy->dev, "Unable to resume USB." - "Re-plugin the cable\n"); - msm_otg_reset(phy); - } - -skip_phy_resume: - if (device_may_wakeup(phy->dev)) - disable_irq_wake(motg->irq); - if (bus) - set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); - - atomic_set(&motg->in_lpm, 0); - - if (motg->async_int) { - motg->async_int = 0; - pm_runtime_put(phy->dev); - enable_irq(motg->irq); - } - - dev_info(phy->dev, "USB exited from low power mode\n"); - - return 0; -} -#endif - -static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA) -{ - if (motg->cur_power == mA) - return; - - /* TODO: Notify PMIC about available current */ - dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA); - motg->cur_power = mA; -} - -static int msm_otg_set_power(struct usb_phy *phy, unsigned mA) -{ - struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - - /* - * Gadget driver uses set_power method to notify about the - * available current based on suspend/configured states. - * - * IDEV_CHG can be drawn irrespective of suspend/un-configured - * states when CDP/ACA is connected. - */ - if (motg->chg_type == USB_SDP_CHARGER) - msm_otg_notify_charger(motg, mA); - - return 0; -} - -static void msm_otg_start_host(struct usb_phy *phy, int on) -{ - struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - struct msm_otg_platform_data *pdata = motg->pdata; - struct usb_hcd *hcd; - - if (!phy->otg->host) - return; - - hcd = bus_to_hcd(phy->otg->host); - - if (on) { - dev_dbg(phy->dev, "host on\n"); - - if (pdata->vbus_power) - pdata->vbus_power(1); - /* - * Some boards have a switch cotrolled by gpio - * to enable/disable internal HUB. Enable internal - * HUB before kicking the host. - */ - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_A_HOST); -#ifdef CONFIG_USB - usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); -#endif - } else { - dev_dbg(phy->dev, "host off\n"); - -#ifdef CONFIG_USB - usb_remove_hcd(hcd); -#endif - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_UNDEFINED); - if (pdata->vbus_power) - pdata->vbus_power(0); - } -} - -static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); - struct usb_hcd *hcd; - - /* - * Fail host registration if this board can support - * only peripheral configuration. - */ - if (motg->pdata->mode == USB_PERIPHERAL) { - dev_info(otg->phy->dev, "Host mode is not supported\n"); - return -ENODEV; - } - - if (!host) { - if (otg->phy->state == OTG_STATE_A_HOST) { - pm_runtime_get_sync(otg->phy->dev); - msm_otg_start_host(otg->phy, 0); - otg->host = NULL; - otg->phy->state = OTG_STATE_UNDEFINED; - schedule_work(&motg->sm_work); - } else { - otg->host = NULL; - } - - return 0; - } - - hcd = bus_to_hcd(host); - hcd->power_budget = motg->pdata->power_budget; - - otg->host = host; - dev_dbg(otg->phy->dev, "host driver registered w/ tranceiver\n"); - - /* - * Kick the state machine work, if peripheral is not supported - * or peripheral is already registered with us. - */ - if (motg->pdata->mode == USB_HOST || otg->gadget) { - pm_runtime_get_sync(otg->phy->dev); - schedule_work(&motg->sm_work); - } - - return 0; -} - -static void msm_otg_start_peripheral(struct usb_phy *phy, int on) -{ - struct msm_otg *motg = container_of(phy, struct msm_otg, phy); - struct msm_otg_platform_data *pdata = motg->pdata; - - if (!phy->otg->gadget) - return; - - if (on) { - dev_dbg(phy->dev, "gadget on\n"); - /* - * Some boards have a switch cotrolled by gpio - * to enable/disable internal HUB. Disable internal - * HUB before kicking the gadget. - */ - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_B_PERIPHERAL); - usb_gadget_vbus_connect(phy->otg->gadget); - } else { - dev_dbg(phy->dev, "gadget off\n"); - usb_gadget_vbus_disconnect(phy->otg->gadget); - if (pdata->setup_gpio) - pdata->setup_gpio(OTG_STATE_UNDEFINED); - } - -} - -static int msm_otg_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); - - /* - * Fail peripheral registration if this board can support - * only host configuration. - */ - if (motg->pdata->mode == USB_HOST) { - dev_info(otg->phy->dev, "Peripheral mode is not supported\n"); - return -ENODEV; - } - - if (!gadget) { - if (otg->phy->state == OTG_STATE_B_PERIPHERAL) { - pm_runtime_get_sync(otg->phy->dev); - msm_otg_start_peripheral(otg->phy, 0); - otg->gadget = NULL; - otg->phy->state = OTG_STATE_UNDEFINED; - schedule_work(&motg->sm_work); - } else { - otg->gadget = NULL; - } - - return 0; - } - otg->gadget = gadget; - dev_dbg(otg->phy->dev, "peripheral driver registered w/ tranceiver\n"); - - /* - * Kick the state machine work, if host is not supported - * or host is already registered with us. - */ - if (motg->pdata->mode == USB_PERIPHERAL || otg->host) { - pm_runtime_get_sync(otg->phy->dev); - schedule_work(&motg->sm_work); - } - - return 0; -} - -static bool msm_chg_check_secondary_det(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 chg_det; - bool ret = false; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - ret = chg_det & (1 << 4); - break; - case SNPS_28NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x87); - ret = chg_det & 1; - break; - default: - break; - } - return ret; -} - -static void msm_chg_enable_secondary_det(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 chg_det; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - /* Turn off charger block */ - chg_det |= ~(1 << 1); - ulpi_write(phy, chg_det, 0x34); - udelay(20); - /* control chg block via ULPI */ - chg_det &= ~(1 << 3); - ulpi_write(phy, chg_det, 0x34); - /* put it in host mode for enabling D- source */ - chg_det &= ~(1 << 2); - ulpi_write(phy, chg_det, 0x34); - /* Turn on chg detect block */ - chg_det &= ~(1 << 1); - ulpi_write(phy, chg_det, 0x34); - udelay(20); - /* enable chg detection */ - chg_det &= ~(1 << 0); - ulpi_write(phy, chg_det, 0x34); - break; - case SNPS_28NM_INTEGRATED_PHY: - /* - * Configure DM as current source, DP as current sink - * and enable battery charging comparators. - */ - ulpi_write(phy, 0x8, 0x85); - ulpi_write(phy, 0x2, 0x85); - ulpi_write(phy, 0x1, 0x85); - break; - default: - break; - } -} - -static bool msm_chg_check_primary_det(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 chg_det; - bool ret = false; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - ret = chg_det & (1 << 4); - break; - case SNPS_28NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x87); - ret = chg_det & 1; - break; - default: - break; - } - return ret; -} - -static void msm_chg_enable_primary_det(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 chg_det; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - /* enable chg detection */ - chg_det &= ~(1 << 0); - ulpi_write(phy, chg_det, 0x34); - break; - case SNPS_28NM_INTEGRATED_PHY: - /* - * Configure DP as current source, DM as current sink - * and enable battery charging comparators. - */ - ulpi_write(phy, 0x2, 0x85); - ulpi_write(phy, 0x1, 0x85); - break; - default: - break; - } -} - -static bool msm_chg_check_dcd(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 line_state; - bool ret = false; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - line_state = ulpi_read(phy, 0x15); - ret = !(line_state & 1); - break; - case SNPS_28NM_INTEGRATED_PHY: - line_state = ulpi_read(phy, 0x87); - ret = line_state & 2; - break; - default: - break; - } - return ret; -} - -static void msm_chg_disable_dcd(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 chg_det; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - chg_det &= ~(1 << 5); - ulpi_write(phy, chg_det, 0x34); - break; - case SNPS_28NM_INTEGRATED_PHY: - ulpi_write(phy, 0x10, 0x86); - break; - default: - break; - } -} - -static void msm_chg_enable_dcd(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 chg_det; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - /* Turn on D+ current source */ - chg_det |= (1 << 5); - ulpi_write(phy, chg_det, 0x34); - break; - case SNPS_28NM_INTEGRATED_PHY: - /* Data contact detection enable */ - ulpi_write(phy, 0x10, 0x85); - break; - default: - break; - } -} - -static void msm_chg_block_on(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 func_ctrl, chg_det; - - /* put the controller in non-driving mode */ - func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); - func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; - func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - /* control chg block via ULPI */ - chg_det &= ~(1 << 3); - ulpi_write(phy, chg_det, 0x34); - /* Turn on chg detect block */ - chg_det &= ~(1 << 1); - ulpi_write(phy, chg_det, 0x34); - udelay(20); - break; - case SNPS_28NM_INTEGRATED_PHY: - /* Clear charger detecting control bits */ - ulpi_write(phy, 0x3F, 0x86); - /* Clear alt interrupt latch and enable bits */ - ulpi_write(phy, 0x1F, 0x92); - ulpi_write(phy, 0x1F, 0x95); - udelay(100); - break; - default: - break; - } -} - -static void msm_chg_block_off(struct msm_otg *motg) -{ - struct usb_phy *phy = &motg->phy; - u32 func_ctrl, chg_det; - - switch (motg->pdata->phy_type) { - case CI_45NM_INTEGRATED_PHY: - chg_det = ulpi_read(phy, 0x34); - /* Turn off charger block */ - chg_det |= ~(1 << 1); - ulpi_write(phy, chg_det, 0x34); - break; - case SNPS_28NM_INTEGRATED_PHY: - /* Clear charger detecting control bits */ - ulpi_write(phy, 0x3F, 0x86); - /* Clear alt interrupt latch and enable bits */ - ulpi_write(phy, 0x1F, 0x92); - ulpi_write(phy, 0x1F, 0x95); - break; - default: - break; - } - - /* put the controller in normal mode */ - func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); - func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; - func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL; - ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); -} - -#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */ -#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */ -#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */ -#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */ -static void msm_chg_detect_work(struct work_struct *w) -{ - struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work); - struct usb_phy *phy = &motg->phy; - bool is_dcd, tmout, vout; - unsigned long delay; - - dev_dbg(phy->dev, "chg detection work\n"); - switch (motg->chg_state) { - case USB_CHG_STATE_UNDEFINED: - pm_runtime_get_sync(phy->dev); - msm_chg_block_on(motg); - msm_chg_enable_dcd(motg); - motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; - motg->dcd_retries = 0; - delay = MSM_CHG_DCD_POLL_TIME; - break; - case USB_CHG_STATE_WAIT_FOR_DCD: - is_dcd = msm_chg_check_dcd(motg); - tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES; - if (is_dcd || tmout) { - msm_chg_disable_dcd(motg); - msm_chg_enable_primary_det(motg); - delay = MSM_CHG_PRIMARY_DET_TIME; - motg->chg_state = USB_CHG_STATE_DCD_DONE; - } else { - delay = MSM_CHG_DCD_POLL_TIME; - } - break; - case USB_CHG_STATE_DCD_DONE: - vout = msm_chg_check_primary_det(motg); - if (vout) { - msm_chg_enable_secondary_det(motg); - delay = MSM_CHG_SECONDARY_DET_TIME; - motg->chg_state = USB_CHG_STATE_PRIMARY_DONE; - } else { - motg->chg_type = USB_SDP_CHARGER; - motg->chg_state = USB_CHG_STATE_DETECTED; - delay = 0; - } - break; - case USB_CHG_STATE_PRIMARY_DONE: - vout = msm_chg_check_secondary_det(motg); - if (vout) - motg->chg_type = USB_DCP_CHARGER; - else - motg->chg_type = USB_CDP_CHARGER; - motg->chg_state = USB_CHG_STATE_SECONDARY_DONE; - /* fall through */ - case USB_CHG_STATE_SECONDARY_DONE: - motg->chg_state = USB_CHG_STATE_DETECTED; - case USB_CHG_STATE_DETECTED: - msm_chg_block_off(motg); - dev_dbg(phy->dev, "charger = %d\n", motg->chg_type); - schedule_work(&motg->sm_work); - return; - default: - return; - } - - schedule_delayed_work(&motg->chg_work, delay); -} - -/* - * We support OTG, Peripheral only and Host only configurations. In case - * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen - * via Id pin status or user request (debugfs). Id/BSV interrupts are not - * enabled when switch is controlled by user and default mode is supplied - * by board file, which can be changed by userspace later. - */ -static void msm_otg_init_sm(struct msm_otg *motg) -{ - struct msm_otg_platform_data *pdata = motg->pdata; - u32 otgsc = readl(USB_OTGSC); - - switch (pdata->mode) { - case USB_OTG: - if (pdata->otg_control == OTG_PHY_CONTROL) { - if (otgsc & OTGSC_ID) - set_bit(ID, &motg->inputs); - else - clear_bit(ID, &motg->inputs); - - if (otgsc & OTGSC_BSV) - set_bit(B_SESS_VLD, &motg->inputs); - else - clear_bit(B_SESS_VLD, &motg->inputs); - } else if (pdata->otg_control == OTG_USER_CONTROL) { - if (pdata->default_mode == USB_HOST) { - clear_bit(ID, &motg->inputs); - } else if (pdata->default_mode == USB_PERIPHERAL) { - set_bit(ID, &motg->inputs); - set_bit(B_SESS_VLD, &motg->inputs); - } else { - set_bit(ID, &motg->inputs); - clear_bit(B_SESS_VLD, &motg->inputs); - } - } - break; - case USB_HOST: - clear_bit(ID, &motg->inputs); - break; - case USB_PERIPHERAL: - set_bit(ID, &motg->inputs); - if (otgsc & OTGSC_BSV) - set_bit(B_SESS_VLD, &motg->inputs); - else - clear_bit(B_SESS_VLD, &motg->inputs); - break; - default: - break; - } -} - -static void msm_otg_sm_work(struct work_struct *w) -{ - struct msm_otg *motg = container_of(w, struct msm_otg, sm_work); - struct usb_otg *otg = motg->phy.otg; - - switch (otg->phy->state) { - case OTG_STATE_UNDEFINED: - dev_dbg(otg->phy->dev, "OTG_STATE_UNDEFINED state\n"); - msm_otg_reset(otg->phy); - msm_otg_init_sm(motg); - otg->phy->state = OTG_STATE_B_IDLE; - /* FALL THROUGH */ - case OTG_STATE_B_IDLE: - dev_dbg(otg->phy->dev, "OTG_STATE_B_IDLE state\n"); - if (!test_bit(ID, &motg->inputs) && otg->host) { - /* disable BSV bit */ - writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC); - msm_otg_start_host(otg->phy, 1); - otg->phy->state = OTG_STATE_A_HOST; - } else if (test_bit(B_SESS_VLD, &motg->inputs)) { - switch (motg->chg_state) { - case USB_CHG_STATE_UNDEFINED: - msm_chg_detect_work(&motg->chg_work.work); - break; - case USB_CHG_STATE_DETECTED: - switch (motg->chg_type) { - case USB_DCP_CHARGER: - msm_otg_notify_charger(motg, - IDEV_CHG_MAX); - break; - case USB_CDP_CHARGER: - msm_otg_notify_charger(motg, - IDEV_CHG_MAX); - msm_otg_start_peripheral(otg->phy, 1); - otg->phy->state - = OTG_STATE_B_PERIPHERAL; - break; - case USB_SDP_CHARGER: - msm_otg_notify_charger(motg, IUNIT); - msm_otg_start_peripheral(otg->phy, 1); - otg->phy->state - = OTG_STATE_B_PERIPHERAL; - break; - default: - break; - } - break; - default: - break; - } - } else { - /* - * If charger detection work is pending, decrement - * the pm usage counter to balance with the one that - * is incremented in charger detection work. - */ - if (cancel_delayed_work_sync(&motg->chg_work)) { - pm_runtime_put_sync(otg->phy->dev); - msm_otg_reset(otg->phy); - } - msm_otg_notify_charger(motg, 0); - motg->chg_state = USB_CHG_STATE_UNDEFINED; - motg->chg_type = USB_INVALID_CHARGER; - } - pm_runtime_put_sync(otg->phy->dev); - break; - case OTG_STATE_B_PERIPHERAL: - dev_dbg(otg->phy->dev, "OTG_STATE_B_PERIPHERAL state\n"); - if (!test_bit(B_SESS_VLD, &motg->inputs) || - !test_bit(ID, &motg->inputs)) { - msm_otg_notify_charger(motg, 0); - msm_otg_start_peripheral(otg->phy, 0); - motg->chg_state = USB_CHG_STATE_UNDEFINED; - motg->chg_type = USB_INVALID_CHARGER; - otg->phy->state = OTG_STATE_B_IDLE; - msm_otg_reset(otg->phy); - schedule_work(w); - } - break; - case OTG_STATE_A_HOST: - dev_dbg(otg->phy->dev, "OTG_STATE_A_HOST state\n"); - if (test_bit(ID, &motg->inputs)) { - msm_otg_start_host(otg->phy, 0); - otg->phy->state = OTG_STATE_B_IDLE; - msm_otg_reset(otg->phy); - schedule_work(w); - } - break; - default: - break; - } -} - -static irqreturn_t msm_otg_irq(int irq, void *data) -{ - struct msm_otg *motg = data; - struct usb_phy *phy = &motg->phy; - u32 otgsc = 0; - - if (atomic_read(&motg->in_lpm)) { - disable_irq_nosync(irq); - motg->async_int = 1; - pm_runtime_get(phy->dev); - return IRQ_HANDLED; - } - - otgsc = readl(USB_OTGSC); - if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS))) - return IRQ_NONE; - - if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) { - if (otgsc & OTGSC_ID) - set_bit(ID, &motg->inputs); - else - clear_bit(ID, &motg->inputs); - dev_dbg(phy->dev, "ID set/clear\n"); - pm_runtime_get_noresume(phy->dev); - } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) { - if (otgsc & OTGSC_BSV) - set_bit(B_SESS_VLD, &motg->inputs); - else - clear_bit(B_SESS_VLD, &motg->inputs); - dev_dbg(phy->dev, "BSV set/clear\n"); - pm_runtime_get_noresume(phy->dev); - } - - writel(otgsc, USB_OTGSC); - schedule_work(&motg->sm_work); - return IRQ_HANDLED; -} - -static int msm_otg_mode_show(struct seq_file *s, void *unused) -{ - struct msm_otg *motg = s->private; - struct usb_otg *otg = motg->phy.otg; - - switch (otg->phy->state) { - case OTG_STATE_A_HOST: - seq_printf(s, "host\n"); - break; - case OTG_STATE_B_PERIPHERAL: - seq_printf(s, "peripheral\n"); - break; - default: - seq_printf(s, "none\n"); - break; - } - - return 0; -} - -static int msm_otg_mode_open(struct inode *inode, struct file *file) -{ - return single_open(file, msm_otg_mode_show, inode->i_private); -} - -static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, - size_t count, loff_t *ppos) -{ - struct seq_file *s = file->private_data; - struct msm_otg *motg = s->private; - char buf[16]; - struct usb_otg *otg = motg->phy.otg; - int status = count; - enum usb_mode_type req_mode; - - memset(buf, 0x00, sizeof(buf)); - - if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) { - status = -EFAULT; - goto out; - } - - if (!strncmp(buf, "host", 4)) { - req_mode = USB_HOST; - } else if (!strncmp(buf, "peripheral", 10)) { - req_mode = USB_PERIPHERAL; - } else if (!strncmp(buf, "none", 4)) { - req_mode = USB_NONE; - } else { - status = -EINVAL; - goto out; - } - - switch (req_mode) { - case USB_NONE: - switch (otg->phy->state) { - case OTG_STATE_A_HOST: - case OTG_STATE_B_PERIPHERAL: - set_bit(ID, &motg->inputs); - clear_bit(B_SESS_VLD, &motg->inputs); - break; - default: - goto out; - } - break; - case USB_PERIPHERAL: - switch (otg->phy->state) { - case OTG_STATE_B_IDLE: - case OTG_STATE_A_HOST: - set_bit(ID, &motg->inputs); - set_bit(B_SESS_VLD, &motg->inputs); - break; - default: - goto out; - } - break; - case USB_HOST: - switch (otg->phy->state) { - case OTG_STATE_B_IDLE: - case OTG_STATE_B_PERIPHERAL: - clear_bit(ID, &motg->inputs); - break; - default: - goto out; - } - break; - default: - goto out; - } - - pm_runtime_get_sync(otg->phy->dev); - schedule_work(&motg->sm_work); -out: - return status; -} - -const struct file_operations msm_otg_mode_fops = { - .open = msm_otg_mode_open, - .read = seq_read, - .write = msm_otg_mode_write, - .llseek = seq_lseek, - .release = single_release, -}; - -static struct dentry *msm_otg_dbg_root; -static struct dentry *msm_otg_dbg_mode; - -static int msm_otg_debugfs_init(struct msm_otg *motg) -{ - msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL); - - if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root)) - return -ENODEV; - - msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR, - msm_otg_dbg_root, motg, &msm_otg_mode_fops); - if (!msm_otg_dbg_mode) { - debugfs_remove(msm_otg_dbg_root); - msm_otg_dbg_root = NULL; - return -ENODEV; - } - - return 0; -} - -static void msm_otg_debugfs_cleanup(void) -{ - debugfs_remove(msm_otg_dbg_mode); - debugfs_remove(msm_otg_dbg_root); -} - -static int __init msm_otg_probe(struct platform_device *pdev) -{ - int ret = 0; - struct resource *res; - struct msm_otg *motg; - struct usb_phy *phy; - - dev_info(&pdev->dev, "msm_otg probe\n"); - if (!pdev->dev.platform_data) { - dev_err(&pdev->dev, "No platform data given. Bailing out\n"); - return -ENODEV; - } - - motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL); - if (!motg) { - dev_err(&pdev->dev, "unable to allocate msm_otg\n"); - return -ENOMEM; - } - - motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); - if (!motg->phy.otg) { - dev_err(&pdev->dev, "unable to allocate msm_otg\n"); - return -ENOMEM; - } - - motg->pdata = pdev->dev.platform_data; - phy = &motg->phy; - phy->dev = &pdev->dev; - - motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk"); - if (IS_ERR(motg->phy_reset_clk)) { - dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); - ret = PTR_ERR(motg->phy_reset_clk); - goto free_motg; - } - - motg->clk = clk_get(&pdev->dev, "usb_hs_clk"); - if (IS_ERR(motg->clk)) { - dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); - ret = PTR_ERR(motg->clk); - goto put_phy_reset_clk; - } - clk_set_rate(motg->clk, 60000000); - - /* - * If USB Core is running its protocol engine based on CORE CLK, - * CORE CLK must be running at >55Mhz for correct HSUSB - * operation and USB core cannot tolerate frequency changes on - * CORE CLK. For such USB cores, vote for maximum clk frequency - * on pclk source - */ - if (motg->pdata->pclk_src_name) { - motg->pclk_src = clk_get(&pdev->dev, - motg->pdata->pclk_src_name); - if (IS_ERR(motg->pclk_src)) - goto put_clk; - clk_set_rate(motg->pclk_src, INT_MAX); - clk_enable(motg->pclk_src); - } else - motg->pclk_src = ERR_PTR(-ENOENT); - - - motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk"); - if (IS_ERR(motg->pclk)) { - dev_err(&pdev->dev, "failed to get usb_hs_pclk\n"); - ret = PTR_ERR(motg->pclk); - goto put_pclk_src; - } - - /* - * USB core clock is not present on all MSM chips. This - * clock is introduced to remove the dependency on AXI - * bus frequency. - */ - motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk"); - if (IS_ERR(motg->core_clk)) - motg->core_clk = NULL; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "failed to get platform resource mem\n"); - ret = -ENODEV; - goto put_core_clk; - } - - motg->regs = ioremap(res->start, resource_size(res)); - if (!motg->regs) { - dev_err(&pdev->dev, "ioremap failed\n"); - ret = -ENOMEM; - goto put_core_clk; - } - dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); - - motg->irq = platform_get_irq(pdev, 0); - if (!motg->irq) { - dev_err(&pdev->dev, "platform_get_irq failed\n"); - ret = -ENODEV; - goto free_regs; - } - - clk_enable(motg->clk); - clk_enable(motg->pclk); - - ret = msm_hsusb_init_vddcx(motg, 1); - if (ret) { - dev_err(&pdev->dev, "hsusb vddcx configuration failed\n"); - goto free_regs; - } - - ret = msm_hsusb_ldo_init(motg, 1); - if (ret) { - dev_err(&pdev->dev, "hsusb vreg configuration failed\n"); - goto vddcx_exit; - } - ret = msm_hsusb_ldo_set_mode(1); - if (ret) { - dev_err(&pdev->dev, "hsusb vreg enable failed\n"); - goto ldo_exit; - } - - if (motg->core_clk) - clk_enable(motg->core_clk); - - writel(0, USB_USBINTR); - writel(0, USB_OTGSC); - - INIT_WORK(&motg->sm_work, msm_otg_sm_work); - INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work); - ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED, - "msm_otg", motg); - if (ret) { - dev_err(&pdev->dev, "request irq failed\n"); - goto disable_clks; - } - - phy->init = msm_otg_reset; - phy->set_power = msm_otg_set_power; - - phy->io_ops = &msm_otg_io_ops; - - phy->otg->phy = &motg->phy; - phy->otg->set_host = msm_otg_set_host; - phy->otg->set_peripheral = msm_otg_set_peripheral; - - ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); - if (ret) { - dev_err(&pdev->dev, "usb_add_phy failed\n"); - goto free_irq; - } - - platform_set_drvdata(pdev, motg); - device_init_wakeup(&pdev->dev, 1); - - if (motg->pdata->mode == USB_OTG && - motg->pdata->otg_control == OTG_USER_CONTROL) { - ret = msm_otg_debugfs_init(motg); - if (ret) - dev_dbg(&pdev->dev, "mode debugfs file is" - "not available\n"); - } - - pm_runtime_set_active(&pdev->dev); - pm_runtime_enable(&pdev->dev); - - return 0; -free_irq: - free_irq(motg->irq, motg); -disable_clks: - clk_disable(motg->pclk); - clk_disable(motg->clk); -ldo_exit: - msm_hsusb_ldo_init(motg, 0); -vddcx_exit: - msm_hsusb_init_vddcx(motg, 0); -free_regs: - iounmap(motg->regs); -put_core_clk: - if (motg->core_clk) - clk_put(motg->core_clk); - clk_put(motg->pclk); -put_pclk_src: - if (!IS_ERR(motg->pclk_src)) { - clk_disable(motg->pclk_src); - clk_put(motg->pclk_src); - } -put_clk: - clk_put(motg->clk); -put_phy_reset_clk: - clk_put(motg->phy_reset_clk); -free_motg: - kfree(motg->phy.otg); - kfree(motg); - return ret; -} - -static int msm_otg_remove(struct platform_device *pdev) -{ - struct msm_otg *motg = platform_get_drvdata(pdev); - struct usb_phy *phy = &motg->phy; - int cnt = 0; - - if (phy->otg->host || phy->otg->gadget) - return -EBUSY; - - msm_otg_debugfs_cleanup(); - cancel_delayed_work_sync(&motg->chg_work); - cancel_work_sync(&motg->sm_work); - - pm_runtime_resume(&pdev->dev); - - device_init_wakeup(&pdev->dev, 0); - pm_runtime_disable(&pdev->dev); - - usb_remove_phy(phy); - free_irq(motg->irq, motg); - - /* - * Put PHY in low power mode. - */ - ulpi_read(phy, 0x14); - ulpi_write(phy, 0x08, 0x09); - - writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); - while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { - if (readl(USB_PORTSC) & PORTSC_PHCD) - break; - udelay(1); - cnt++; - } - if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) - dev_err(phy->dev, "Unable to suspend PHY\n"); - - clk_disable(motg->pclk); - clk_disable(motg->clk); - if (motg->core_clk) - clk_disable(motg->core_clk); - if (!IS_ERR(motg->pclk_src)) { - clk_disable(motg->pclk_src); - clk_put(motg->pclk_src); - } - msm_hsusb_ldo_init(motg, 0); - - iounmap(motg->regs); - pm_runtime_set_suspended(&pdev->dev); - - clk_put(motg->phy_reset_clk); - clk_put(motg->pclk); - clk_put(motg->clk); - if (motg->core_clk) - clk_put(motg->core_clk); - - kfree(motg->phy.otg); - kfree(motg); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME -static int msm_otg_runtime_idle(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - struct usb_otg *otg = motg->phy.otg; - - dev_dbg(dev, "OTG runtime idle\n"); - - /* - * It is observed some times that a spurious interrupt - * comes when PHY is put into LPM immediately after PHY reset. - * This 1 sec delay also prevents entering into LPM immediately - * after asynchronous interrupt. - */ - if (otg->phy->state != OTG_STATE_UNDEFINED) - pm_schedule_suspend(dev, 1000); - - return -EAGAIN; -} - -static int msm_otg_runtime_suspend(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - - dev_dbg(dev, "OTG runtime suspend\n"); - return msm_otg_suspend(motg); -} - -static int msm_otg_runtime_resume(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - - dev_dbg(dev, "OTG runtime resume\n"); - return msm_otg_resume(motg); -} -#endif - -#ifdef CONFIG_PM_SLEEP -static int msm_otg_pm_suspend(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - - dev_dbg(dev, "OTG PM suspend\n"); - return msm_otg_suspend(motg); -} - -static int msm_otg_pm_resume(struct device *dev) -{ - struct msm_otg *motg = dev_get_drvdata(dev); - int ret; - - dev_dbg(dev, "OTG PM resume\n"); - - ret = msm_otg_resume(motg); - if (ret) - return ret; - - /* - * Runtime PM Documentation recommends bringing the - * device to full powered state upon resume. - */ - pm_runtime_disable(dev); - pm_runtime_set_active(dev); - pm_runtime_enable(dev); - - return 0; -} -#endif - -#ifdef CONFIG_PM -static const struct dev_pm_ops msm_otg_dev_pm_ops = { - SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) - SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, - msm_otg_runtime_idle) -}; -#endif - -static struct platform_driver msm_otg_driver = { - .remove = msm_otg_remove, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, -#ifdef CONFIG_PM - .pm = &msm_otg_dev_pm_ops, -#endif - }, -}; - -module_platform_driver_probe(msm_otg_driver, msm_otg_probe); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("MSM USB transceiver driver"); diff --git a/drivers/usb/phy/mv_otg.c b/drivers/usb/phy/mv_otg.c deleted file mode 100644 index b6a9be3..0000000 --- a/drivers/usb/phy/mv_otg.c +++ /dev/null @@ -1,923 +0,0 @@ -/* - * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * Author: Chao Xie - * Neil Zhang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include - -#include "mv_otg.h" - -#define DRIVER_DESC "Marvell USB OTG transceiver driver" -#define DRIVER_VERSION "Jan 20, 2010" - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - -static const char driver_name[] = "mv-otg"; - -static char *state_string[] = { - "undefined", - "b_idle", - "b_srp_init", - "b_peripheral", - "b_wait_acon", - "b_host", - "a_idle", - "a_wait_vrise", - "a_wait_bcon", - "a_host", - "a_suspend", - "a_peripheral", - "a_wait_vfall", - "a_vbus_err" -}; - -static int mv_otg_set_vbus(struct usb_otg *otg, bool on) -{ - struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy); - if (mvotg->pdata->set_vbus == NULL) - return -ENODEV; - - return mvotg->pdata->set_vbus(on); -} - -static int mv_otg_set_host(struct usb_otg *otg, - struct usb_bus *host) -{ - otg->host = host; - - return 0; -} - -static int mv_otg_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - otg->gadget = gadget; - - return 0; -} - -static void mv_otg_run_state_machine(struct mv_otg *mvotg, - unsigned long delay) -{ - dev_dbg(&mvotg->pdev->dev, "transceiver is updated\n"); - if (!mvotg->qwork) - return; - - queue_delayed_work(mvotg->qwork, &mvotg->work, delay); -} - -static void mv_otg_timer_await_bcon(unsigned long data) -{ - struct mv_otg *mvotg = (struct mv_otg *) data; - - mvotg->otg_ctrl.a_wait_bcon_timeout = 1; - - dev_info(&mvotg->pdev->dev, "B Device No Response!\n"); - - if (spin_trylock(&mvotg->wq_lock)) { - mv_otg_run_state_machine(mvotg, 0); - spin_unlock(&mvotg->wq_lock); - } -} - -static int mv_otg_cancel_timer(struct mv_otg *mvotg, unsigned int id) -{ - struct timer_list *timer; - - if (id >= OTG_TIMER_NUM) - return -EINVAL; - - timer = &mvotg->otg_ctrl.timer[id]; - - if (timer_pending(timer)) - del_timer(timer); - - return 0; -} - -static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id, - unsigned long interval, - void (*callback) (unsigned long)) -{ - struct timer_list *timer; - - if (id >= OTG_TIMER_NUM) - return -EINVAL; - - timer = &mvotg->otg_ctrl.timer[id]; - if (timer_pending(timer)) { - dev_err(&mvotg->pdev->dev, "Timer%d is already running\n", id); - return -EBUSY; - } - - init_timer(timer); - timer->data = (unsigned long) mvotg; - timer->function = callback; - timer->expires = jiffies + interval; - add_timer(timer); - - return 0; -} - -static int mv_otg_reset(struct mv_otg *mvotg) -{ - unsigned int loops; - u32 tmp; - - /* Stop the controller */ - tmp = readl(&mvotg->op_regs->usbcmd); - tmp &= ~USBCMD_RUN_STOP; - writel(tmp, &mvotg->op_regs->usbcmd); - - /* Reset the controller to get default values */ - writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd); - - loops = 500; - while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) { - if (loops == 0) { - dev_err(&mvotg->pdev->dev, - "Wait for RESET completed TIMEOUT\n"); - return -ETIMEDOUT; - } - loops--; - udelay(20); - } - - writel(0x0, &mvotg->op_regs->usbintr); - tmp = readl(&mvotg->op_regs->usbsts); - writel(tmp, &mvotg->op_regs->usbsts); - - return 0; -} - -static void mv_otg_init_irq(struct mv_otg *mvotg) -{ - u32 otgsc; - - mvotg->irq_en = OTGSC_INTR_A_SESSION_VALID - | OTGSC_INTR_A_VBUS_VALID; - mvotg->irq_status = OTGSC_INTSTS_A_SESSION_VALID - | OTGSC_INTSTS_A_VBUS_VALID; - - if (mvotg->pdata->vbus == NULL) { - mvotg->irq_en |= OTGSC_INTR_B_SESSION_VALID - | OTGSC_INTR_B_SESSION_END; - mvotg->irq_status |= OTGSC_INTSTS_B_SESSION_VALID - | OTGSC_INTSTS_B_SESSION_END; - } - - if (mvotg->pdata->id == NULL) { - mvotg->irq_en |= OTGSC_INTR_USB_ID; - mvotg->irq_status |= OTGSC_INTSTS_USB_ID; - } - - otgsc = readl(&mvotg->op_regs->otgsc); - otgsc |= mvotg->irq_en; - writel(otgsc, &mvotg->op_regs->otgsc); -} - -static void mv_otg_start_host(struct mv_otg *mvotg, int on) -{ -#ifdef CONFIG_USB - struct usb_otg *otg = mvotg->phy.otg; - struct usb_hcd *hcd; - - if (!otg->host) - return; - - dev_info(&mvotg->pdev->dev, "%s host\n", on ? "start" : "stop"); - - hcd = bus_to_hcd(otg->host); - - if (on) - usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); - else - usb_remove_hcd(hcd); -#endif /* CONFIG_USB */ -} - -static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) -{ - struct usb_otg *otg = mvotg->phy.otg; - - if (!otg->gadget) - return; - - dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off"); - - if (on) - usb_gadget_vbus_connect(otg->gadget); - else - usb_gadget_vbus_disconnect(otg->gadget); -} - -static void otg_clock_enable(struct mv_otg *mvotg) -{ - unsigned int i; - - for (i = 0; i < mvotg->clknum; i++) - clk_prepare_enable(mvotg->clk[i]); -} - -static void otg_clock_disable(struct mv_otg *mvotg) -{ - unsigned int i; - - for (i = 0; i < mvotg->clknum; i++) - clk_disable_unprepare(mvotg->clk[i]); -} - -static int mv_otg_enable_internal(struct mv_otg *mvotg) -{ - int retval = 0; - - if (mvotg->active) - return 0; - - dev_dbg(&mvotg->pdev->dev, "otg enabled\n"); - - otg_clock_enable(mvotg); - if (mvotg->pdata->phy_init) { - retval = mvotg->pdata->phy_init(mvotg->phy_regs); - if (retval) { - dev_err(&mvotg->pdev->dev, - "init phy error %d\n", retval); - otg_clock_disable(mvotg); - return retval; - } - } - mvotg->active = 1; - - return 0; - -} - -static int mv_otg_enable(struct mv_otg *mvotg) -{ - if (mvotg->clock_gating) - return mv_otg_enable_internal(mvotg); - - return 0; -} - -static void mv_otg_disable_internal(struct mv_otg *mvotg) -{ - if (mvotg->active) { - dev_dbg(&mvotg->pdev->dev, "otg disabled\n"); - if (mvotg->pdata->phy_deinit) - mvotg->pdata->phy_deinit(mvotg->phy_regs); - otg_clock_disable(mvotg); - mvotg->active = 0; - } -} - -static void mv_otg_disable(struct mv_otg *mvotg) -{ - if (mvotg->clock_gating) - mv_otg_disable_internal(mvotg); -} - -static void mv_otg_update_inputs(struct mv_otg *mvotg) -{ - struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; - u32 otgsc; - - otgsc = readl(&mvotg->op_regs->otgsc); - - if (mvotg->pdata->vbus) { - if (mvotg->pdata->vbus->poll() == VBUS_HIGH) { - otg_ctrl->b_sess_vld = 1; - otg_ctrl->b_sess_end = 0; - } else { - otg_ctrl->b_sess_vld = 0; - otg_ctrl->b_sess_end = 1; - } - } else { - otg_ctrl->b_sess_vld = !!(otgsc & OTGSC_STS_B_SESSION_VALID); - otg_ctrl->b_sess_end = !!(otgsc & OTGSC_STS_B_SESSION_END); - } - - if (mvotg->pdata->id) - otg_ctrl->id = !!mvotg->pdata->id->poll(); - else - otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID); - - if (mvotg->pdata->otg_force_a_bus_req && !otg_ctrl->id) - otg_ctrl->a_bus_req = 1; - - otg_ctrl->a_sess_vld = !!(otgsc & OTGSC_STS_A_SESSION_VALID); - otg_ctrl->a_vbus_vld = !!(otgsc & OTGSC_STS_A_VBUS_VALID); - - dev_dbg(&mvotg->pdev->dev, "%s: ", __func__); - dev_dbg(&mvotg->pdev->dev, "id %d\n", otg_ctrl->id); - dev_dbg(&mvotg->pdev->dev, "b_sess_vld %d\n", otg_ctrl->b_sess_vld); - dev_dbg(&mvotg->pdev->dev, "b_sess_end %d\n", otg_ctrl->b_sess_end); - dev_dbg(&mvotg->pdev->dev, "a_vbus_vld %d\n", otg_ctrl->a_vbus_vld); - dev_dbg(&mvotg->pdev->dev, "a_sess_vld %d\n", otg_ctrl->a_sess_vld); -} - -static void mv_otg_update_state(struct mv_otg *mvotg) -{ - struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; - struct usb_phy *phy = &mvotg->phy; - int old_state = phy->state; - - switch (old_state) { - case OTG_STATE_UNDEFINED: - phy->state = OTG_STATE_B_IDLE; - /* FALL THROUGH */ - case OTG_STATE_B_IDLE: - if (otg_ctrl->id == 0) - phy->state = OTG_STATE_A_IDLE; - else if (otg_ctrl->b_sess_vld) - phy->state = OTG_STATE_B_PERIPHERAL; - break; - case OTG_STATE_B_PERIPHERAL: - if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0) - phy->state = OTG_STATE_B_IDLE; - break; - case OTG_STATE_A_IDLE: - if (otg_ctrl->id) - phy->state = OTG_STATE_B_IDLE; - else if (!(otg_ctrl->a_bus_drop) && - (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det)) - phy->state = OTG_STATE_A_WAIT_VRISE; - break; - case OTG_STATE_A_WAIT_VRISE: - if (otg_ctrl->a_vbus_vld) - phy->state = OTG_STATE_A_WAIT_BCON; - break; - case OTG_STATE_A_WAIT_BCON: - if (otg_ctrl->id || otg_ctrl->a_bus_drop - || otg_ctrl->a_wait_bcon_timeout) { - mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); - mvotg->otg_ctrl.a_wait_bcon_timeout = 0; - phy->state = OTG_STATE_A_WAIT_VFALL; - otg_ctrl->a_bus_req = 0; - } else if (!otg_ctrl->a_vbus_vld) { - mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); - mvotg->otg_ctrl.a_wait_bcon_timeout = 0; - phy->state = OTG_STATE_A_VBUS_ERR; - } else if (otg_ctrl->b_conn) { - mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); - mvotg->otg_ctrl.a_wait_bcon_timeout = 0; - phy->state = OTG_STATE_A_HOST; - } - break; - case OTG_STATE_A_HOST: - if (otg_ctrl->id || !otg_ctrl->b_conn - || otg_ctrl->a_bus_drop) - phy->state = OTG_STATE_A_WAIT_BCON; - else if (!otg_ctrl->a_vbus_vld) - phy->state = OTG_STATE_A_VBUS_ERR; - break; - case OTG_STATE_A_WAIT_VFALL: - if (otg_ctrl->id - || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld) - || otg_ctrl->a_bus_req) - phy->state = OTG_STATE_A_IDLE; - break; - case OTG_STATE_A_VBUS_ERR: - if (otg_ctrl->id || otg_ctrl->a_clr_err - || otg_ctrl->a_bus_drop) { - otg_ctrl->a_clr_err = 0; - phy->state = OTG_STATE_A_WAIT_VFALL; - } - break; - default: - break; - } -} - -static void mv_otg_work(struct work_struct *work) -{ - struct mv_otg *mvotg; - struct usb_phy *phy; - struct usb_otg *otg; - int old_state; - - mvotg = container_of(to_delayed_work(work), struct mv_otg, work); - -run: - /* work queue is single thread, or we need spin_lock to protect */ - phy = &mvotg->phy; - otg = phy->otg; - old_state = phy->state; - - if (!mvotg->active) - return; - - mv_otg_update_inputs(mvotg); - mv_otg_update_state(mvotg); - - if (old_state != phy->state) { - dev_info(&mvotg->pdev->dev, "change from state %s to %s\n", - state_string[old_state], - state_string[phy->state]); - - switch (phy->state) { - case OTG_STATE_B_IDLE: - otg->default_a = 0; - if (old_state == OTG_STATE_B_PERIPHERAL) - mv_otg_start_periphrals(mvotg, 0); - mv_otg_reset(mvotg); - mv_otg_disable(mvotg); - break; - case OTG_STATE_B_PERIPHERAL: - mv_otg_enable(mvotg); - mv_otg_start_periphrals(mvotg, 1); - break; - case OTG_STATE_A_IDLE: - otg->default_a = 1; - mv_otg_enable(mvotg); - if (old_state == OTG_STATE_A_WAIT_VFALL) - mv_otg_start_host(mvotg, 0); - mv_otg_reset(mvotg); - break; - case OTG_STATE_A_WAIT_VRISE: - mv_otg_set_vbus(otg, 1); - break; - case OTG_STATE_A_WAIT_BCON: - if (old_state != OTG_STATE_A_HOST) - mv_otg_start_host(mvotg, 1); - mv_otg_set_timer(mvotg, A_WAIT_BCON_TIMER, - T_A_WAIT_BCON, - mv_otg_timer_await_bcon); - /* - * Now, we directly enter A_HOST. So set b_conn = 1 - * here. In fact, it need host driver to notify us. - */ - mvotg->otg_ctrl.b_conn = 1; - break; - case OTG_STATE_A_HOST: - break; - case OTG_STATE_A_WAIT_VFALL: - /* - * Now, we has exited A_HOST. So set b_conn = 0 - * here. In fact, it need host driver to notify us. - */ - mvotg->otg_ctrl.b_conn = 0; - mv_otg_set_vbus(otg, 0); - break; - case OTG_STATE_A_VBUS_ERR: - break; - default: - break; - } - goto run; - } -} - -static irqreturn_t mv_otg_irq(int irq, void *dev) -{ - struct mv_otg *mvotg = dev; - u32 otgsc; - - otgsc = readl(&mvotg->op_regs->otgsc); - writel(otgsc, &mvotg->op_regs->otgsc); - - /* - * if we have vbus, then the vbus detection for B-device - * will be done by mv_otg_inputs_irq(). - */ - if (mvotg->pdata->vbus) - if ((otgsc & OTGSC_STS_USB_ID) && - !(otgsc & OTGSC_INTSTS_USB_ID)) - return IRQ_NONE; - - if ((otgsc & mvotg->irq_status) == 0) - return IRQ_NONE; - - mv_otg_run_state_machine(mvotg, 0); - - return IRQ_HANDLED; -} - -static irqreturn_t mv_otg_inputs_irq(int irq, void *dev) -{ - struct mv_otg *mvotg = dev; - - /* The clock may disabled at this time */ - if (!mvotg->active) { - mv_otg_enable(mvotg); - mv_otg_init_irq(mvotg); - } - - mv_otg_run_state_machine(mvotg, 0); - - return IRQ_HANDLED; -} - -static ssize_t -get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct mv_otg *mvotg = dev_get_drvdata(dev); - return scnprintf(buf, PAGE_SIZE, "%d\n", - mvotg->otg_ctrl.a_bus_req); -} - -static ssize_t -set_a_bus_req(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct mv_otg *mvotg = dev_get_drvdata(dev); - - if (count > 2) - return -1; - - /* We will use this interface to change to A device */ - if (mvotg->phy.state != OTG_STATE_B_IDLE - && mvotg->phy.state != OTG_STATE_A_IDLE) - return -1; - - /* The clock may disabled and we need to set irq for ID detected */ - mv_otg_enable(mvotg); - mv_otg_init_irq(mvotg); - - if (buf[0] == '1') { - mvotg->otg_ctrl.a_bus_req = 1; - mvotg->otg_ctrl.a_bus_drop = 0; - dev_dbg(&mvotg->pdev->dev, - "User request: a_bus_req = 1\n"); - - if (spin_trylock(&mvotg->wq_lock)) { - mv_otg_run_state_machine(mvotg, 0); - spin_unlock(&mvotg->wq_lock); - } - } - - return count; -} - -static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, - set_a_bus_req); - -static ssize_t -set_a_clr_err(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct mv_otg *mvotg = dev_get_drvdata(dev); - if (!mvotg->phy.otg->default_a) - return -1; - - if (count > 2) - return -1; - - if (buf[0] == '1') { - mvotg->otg_ctrl.a_clr_err = 1; - dev_dbg(&mvotg->pdev->dev, - "User request: a_clr_err = 1\n"); - } - - if (spin_trylock(&mvotg->wq_lock)) { - mv_otg_run_state_machine(mvotg, 0); - spin_unlock(&mvotg->wq_lock); - } - - return count; -} - -static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); - -static ssize_t -get_a_bus_drop(struct device *dev, struct device_attribute *attr, - char *buf) -{ - struct mv_otg *mvotg = dev_get_drvdata(dev); - return scnprintf(buf, PAGE_SIZE, "%d\n", - mvotg->otg_ctrl.a_bus_drop); -} - -static ssize_t -set_a_bus_drop(struct device *dev, struct device_attribute *attr, - const char *buf, size_t count) -{ - struct mv_otg *mvotg = dev_get_drvdata(dev); - if (!mvotg->phy.otg->default_a) - return -1; - - if (count > 2) - return -1; - - if (buf[0] == '0') { - mvotg->otg_ctrl.a_bus_drop = 0; - dev_dbg(&mvotg->pdev->dev, - "User request: a_bus_drop = 0\n"); - } else if (buf[0] == '1') { - mvotg->otg_ctrl.a_bus_drop = 1; - mvotg->otg_ctrl.a_bus_req = 0; - dev_dbg(&mvotg->pdev->dev, - "User request: a_bus_drop = 1\n"); - dev_dbg(&mvotg->pdev->dev, - "User request: and a_bus_req = 0\n"); - } - - if (spin_trylock(&mvotg->wq_lock)) { - mv_otg_run_state_machine(mvotg, 0); - spin_unlock(&mvotg->wq_lock); - } - - return count; -} - -static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, - get_a_bus_drop, set_a_bus_drop); - -static struct attribute *inputs_attrs[] = { - &dev_attr_a_bus_req.attr, - &dev_attr_a_clr_err.attr, - &dev_attr_a_bus_drop.attr, - NULL, -}; - -static struct attribute_group inputs_attr_group = { - .name = "inputs", - .attrs = inputs_attrs, -}; - -int mv_otg_remove(struct platform_device *pdev) -{ - struct mv_otg *mvotg = platform_get_drvdata(pdev); - - sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group); - - if (mvotg->qwork) { - flush_workqueue(mvotg->qwork); - destroy_workqueue(mvotg->qwork); - } - - mv_otg_disable(mvotg); - - usb_remove_phy(&mvotg->phy); - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static int mv_otg_probe(struct platform_device *pdev) -{ - struct mv_usb_platform_data *pdata = pdev->dev.platform_data; - struct mv_otg *mvotg; - struct usb_otg *otg; - struct resource *r; - int retval = 0, clk_i, i; - size_t size; - - if (pdata == NULL) { - dev_err(&pdev->dev, "failed to get platform data\n"); - return -ENODEV; - } - - size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum; - mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); - if (!mvotg) { - dev_err(&pdev->dev, "failed to allocate memory!\n"); - return -ENOMEM; - } - - otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; - - platform_set_drvdata(pdev, mvotg); - - mvotg->pdev = pdev; - mvotg->pdata = pdata; - - mvotg->clknum = pdata->clknum; - for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) { - mvotg->clk[clk_i] = devm_clk_get(&pdev->dev, - pdata->clkname[clk_i]); - if (IS_ERR(mvotg->clk[clk_i])) { - retval = PTR_ERR(mvotg->clk[clk_i]); - return retval; - } - } - - mvotg->qwork = create_singlethread_workqueue("mv_otg_queue"); - if (!mvotg->qwork) { - dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n"); - return -ENOMEM; - } - - INIT_DELAYED_WORK(&mvotg->work, mv_otg_work); - - /* OTG common part */ - mvotg->pdev = pdev; - mvotg->phy.dev = &pdev->dev; - mvotg->phy.otg = otg; - mvotg->phy.label = driver_name; - mvotg->phy.state = OTG_STATE_UNDEFINED; - - otg->phy = &mvotg->phy; - otg->set_host = mv_otg_set_host; - otg->set_peripheral = mv_otg_set_peripheral; - otg->set_vbus = mv_otg_set_vbus; - - for (i = 0; i < OTG_TIMER_NUM; i++) - init_timer(&mvotg->otg_ctrl.timer[i]); - - r = platform_get_resource_byname(mvotg->pdev, - IORESOURCE_MEM, "phyregs"); - if (r == NULL) { - dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); - retval = -ENODEV; - goto err_destroy_workqueue; - } - - mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); - if (mvotg->phy_regs == NULL) { - dev_err(&pdev->dev, "failed to map phy I/O memory\n"); - retval = -EFAULT; - goto err_destroy_workqueue; - } - - r = platform_get_resource_byname(mvotg->pdev, - IORESOURCE_MEM, "capregs"); - if (r == NULL) { - dev_err(&pdev->dev, "no I/O memory resource defined\n"); - retval = -ENODEV; - goto err_destroy_workqueue; - } - - mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); - if (mvotg->cap_regs == NULL) { - dev_err(&pdev->dev, "failed to map I/O memory\n"); - retval = -EFAULT; - goto err_destroy_workqueue; - } - - /* we will acces controller register, so enable the udc controller */ - retval = mv_otg_enable_internal(mvotg); - if (retval) { - dev_err(&pdev->dev, "mv otg enable error %d\n", retval); - goto err_destroy_workqueue; - } - - mvotg->op_regs = - (struct mv_otg_regs __iomem *) ((unsigned long) mvotg->cap_regs - + (readl(mvotg->cap_regs) & CAPLENGTH_MASK)); - - if (pdata->id) { - retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq, - NULL, mv_otg_inputs_irq, - IRQF_ONESHOT, "id", mvotg); - if (retval) { - dev_info(&pdev->dev, - "Failed to request irq for ID\n"); - pdata->id = NULL; - } - } - - if (pdata->vbus) { - mvotg->clock_gating = 1; - retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq, - NULL, mv_otg_inputs_irq, - IRQF_ONESHOT, "vbus", mvotg); - if (retval) { - dev_info(&pdev->dev, - "Failed to request irq for VBUS, " - "disable clock gating\n"); - mvotg->clock_gating = 0; - pdata->vbus = NULL; - } - } - - if (pdata->disable_otg_clock_gating) - mvotg->clock_gating = 0; - - mv_otg_reset(mvotg); - mv_otg_init_irq(mvotg); - - r = platform_get_resource(mvotg->pdev, IORESOURCE_IRQ, 0); - if (r == NULL) { - dev_err(&pdev->dev, "no IRQ resource defined\n"); - retval = -ENODEV; - goto err_disable_clk; - } - - mvotg->irq = r->start; - if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED, - driver_name, mvotg)) { - dev_err(&pdev->dev, "Request irq %d for OTG failed\n", - mvotg->irq); - mvotg->irq = 0; - retval = -ENODEV; - goto err_disable_clk; - } - - retval = usb_add_phy(&mvotg->phy, USB_PHY_TYPE_USB2); - if (retval < 0) { - dev_err(&pdev->dev, "can't register transceiver, %d\n", - retval); - goto err_disable_clk; - } - - retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group); - if (retval < 0) { - dev_dbg(&pdev->dev, - "Can't register sysfs attr group: %d\n", retval); - goto err_remove_phy; - } - - spin_lock_init(&mvotg->wq_lock); - if (spin_trylock(&mvotg->wq_lock)) { - mv_otg_run_state_machine(mvotg, 2 * HZ); - spin_unlock(&mvotg->wq_lock); - } - - dev_info(&pdev->dev, - "successful probe OTG device %s clock gating.\n", - mvotg->clock_gating ? "with" : "without"); - - return 0; - -err_remove_phy: - usb_remove_phy(&mvotg->phy); -err_disable_clk: - mv_otg_disable_internal(mvotg); -err_destroy_workqueue: - flush_workqueue(mvotg->qwork); - destroy_workqueue(mvotg->qwork); - - platform_set_drvdata(pdev, NULL); - - return retval; -} - -#ifdef CONFIG_PM -static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct mv_otg *mvotg = platform_get_drvdata(pdev); - - if (mvotg->phy.state != OTG_STATE_B_IDLE) { - dev_info(&pdev->dev, - "OTG state is not B_IDLE, it is %d!\n", - mvotg->phy.state); - return -EAGAIN; - } - - if (!mvotg->clock_gating) - mv_otg_disable_internal(mvotg); - - return 0; -} - -static int mv_otg_resume(struct platform_device *pdev) -{ - struct mv_otg *mvotg = platform_get_drvdata(pdev); - u32 otgsc; - - if (!mvotg->clock_gating) { - mv_otg_enable_internal(mvotg); - - otgsc = readl(&mvotg->op_regs->otgsc); - otgsc |= mvotg->irq_en; - writel(otgsc, &mvotg->op_regs->otgsc); - - if (spin_trylock(&mvotg->wq_lock)) { - mv_otg_run_state_machine(mvotg, 0); - spin_unlock(&mvotg->wq_lock); - } - } - return 0; -} -#endif - -static struct platform_driver mv_otg_driver = { - .probe = mv_otg_probe, - .remove = __exit_p(mv_otg_remove), - .driver = { - .owner = THIS_MODULE, - .name = driver_name, - }, -#ifdef CONFIG_PM - .suspend = mv_otg_suspend, - .resume = mv_otg_resume, -#endif -}; -module_platform_driver(mv_otg_driver); diff --git a/drivers/usb/phy/mv_otg.h b/drivers/usb/phy/mv_otg.h deleted file mode 100644 index 8a9e351..0000000 --- a/drivers/usb/phy/mv_otg.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - */ - -#ifndef __MV_USB_OTG_CONTROLLER__ -#define __MV_USB_OTG_CONTROLLER__ - -#include - -/* Command Register Bit Masks */ -#define USBCMD_RUN_STOP (0x00000001) -#define USBCMD_CTRL_RESET (0x00000002) - -/* otgsc Register Bit Masks */ -#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 -#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 -#define OTGSC_CTRL_OTG_TERM 0x00000008 -#define OTGSC_CTRL_DATA_PULSING 0x00000010 -#define OTGSC_STS_USB_ID 0x00000100 -#define OTGSC_STS_A_VBUS_VALID 0x00000200 -#define OTGSC_STS_A_SESSION_VALID 0x00000400 -#define OTGSC_STS_B_SESSION_VALID 0x00000800 -#define OTGSC_STS_B_SESSION_END 0x00001000 -#define OTGSC_STS_1MS_TOGGLE 0x00002000 -#define OTGSC_STS_DATA_PULSING 0x00004000 -#define OTGSC_INTSTS_USB_ID 0x00010000 -#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 -#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 -#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 -#define OTGSC_INTSTS_B_SESSION_END 0x00100000 -#define OTGSC_INTSTS_1MS 0x00200000 -#define OTGSC_INTSTS_DATA_PULSING 0x00400000 -#define OTGSC_INTR_USB_ID 0x01000000 -#define OTGSC_INTR_A_VBUS_VALID 0x02000000 -#define OTGSC_INTR_A_SESSION_VALID 0x04000000 -#define OTGSC_INTR_B_SESSION_VALID 0x08000000 -#define OTGSC_INTR_B_SESSION_END 0x10000000 -#define OTGSC_INTR_1MS_TIMER 0x20000000 -#define OTGSC_INTR_DATA_PULSING 0x40000000 - -#define CAPLENGTH_MASK (0xff) - -/* Timer's interval, unit 10ms */ -#define T_A_WAIT_VRISE 100 -#define T_A_WAIT_BCON 2000 -#define T_A_AIDL_BDIS 100 -#define T_A_BIDL_ADIS 20 -#define T_B_ASE0_BRST 400 -#define T_B_SE0_SRP 300 -#define T_B_SRP_FAIL 2000 -#define T_B_DATA_PLS 10 -#define T_B_SRP_INIT 100 -#define T_A_SRP_RSPNS 10 -#define T_A_DRV_RSM 5 - -enum otg_function { - OTG_B_DEVICE = 0, - OTG_A_DEVICE -}; - -enum mv_otg_timer { - A_WAIT_BCON_TIMER = 0, - OTG_TIMER_NUM -}; - -/* PXA OTG state machine */ -struct mv_otg_ctrl { - /* internal variables */ - u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */ - u8 b_srp_done; - u8 b_hnp_en; - - /* OTG inputs */ - u8 a_bus_drop; - u8 a_bus_req; - u8 a_clr_err; - u8 a_bus_resume; - u8 a_bus_suspend; - u8 a_conn; - u8 a_sess_vld; - u8 a_srp_det; - u8 a_vbus_vld; - u8 b_bus_req; /* B-Device Require Bus */ - u8 b_bus_resume; - u8 b_bus_suspend; - u8 b_conn; - u8 b_se0_srp; - u8 b_sess_end; - u8 b_sess_vld; - u8 id; - u8 a_suspend_req; - - /*Timer event */ - u8 a_aidl_bdis_timeout; - u8 b_ase0_brst_timeout; - u8 a_bidl_adis_timeout; - u8 a_wait_bcon_timeout; - - struct timer_list timer[OTG_TIMER_NUM]; -}; - -#define VUSBHS_MAX_PORTS 8 - -struct mv_otg_regs { - u32 usbcmd; /* Command register */ - u32 usbsts; /* Status register */ - u32 usbintr; /* Interrupt enable */ - u32 frindex; /* Frame index */ - u32 reserved1[1]; - u32 deviceaddr; /* Device Address */ - u32 eplistaddr; /* Endpoint List Address */ - u32 ttctrl; /* HOST TT status and control */ - u32 burstsize; /* Programmable Burst Size */ - u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */ - u32 reserved[4]; - u32 epnak; /* Endpoint NAK */ - u32 epnaken; /* Endpoint NAK Enable */ - u32 configflag; /* Configured Flag register */ - u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */ - u32 otgsc; - u32 usbmode; /* USB Host/Device mode */ - u32 epsetupstat; /* Endpoint Setup Status */ - u32 epprime; /* Endpoint Initialize */ - u32 epflush; /* Endpoint De-initialize */ - u32 epstatus; /* Endpoint Status */ - u32 epcomplete; /* Endpoint Interrupt On Complete */ - u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */ - u32 mcr; /* Mux Control */ - u32 isr; /* Interrupt Status */ - u32 ier; /* Interrupt Enable */ -}; - -struct mv_otg { - struct usb_phy phy; - struct mv_otg_ctrl otg_ctrl; - - /* base address */ - void __iomem *phy_regs; - void __iomem *cap_regs; - struct mv_otg_regs __iomem *op_regs; - - struct platform_device *pdev; - int irq; - u32 irq_status; - u32 irq_en; - - struct delayed_work work; - struct workqueue_struct *qwork; - - spinlock_t wq_lock; - - struct mv_usb_platform_data *pdata; - - unsigned int active; - unsigned int clock_gating; - unsigned int clknum; - struct clk *clk[0]; -}; - -#endif diff --git a/drivers/usb/phy/mv_u3d_phy.c b/drivers/usb/phy/mv_u3d_phy.c deleted file mode 100644 index 9d85991..0000000 --- a/drivers/usb/phy/mv_u3d_phy.c +++ /dev/null @@ -1,343 +0,0 @@ -/* - * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include "mv_u3d_phy.h" - -/* - * struct mv_u3d_phy - transceiver driver state - * @phy: transceiver structure - * @dev: The parent device supplied to the probe function - * @clk: usb phy clock - * @base: usb phy register memory base - */ -struct mv_u3d_phy { - struct usb_phy phy; - struct mv_usb_platform_data *plat; - struct device *dev; - struct clk *clk; - void __iomem *base; -}; - -static u32 mv_u3d_phy_read(void __iomem *base, u32 reg) -{ - void __iomem *addr, *data; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - return readl_relaxed(data); -} - -static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value) -{ - void __iomem *addr, *data; - u32 tmp; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - tmp = readl_relaxed(data); - tmp |= value; - writel_relaxed(tmp, data); -} - -static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value) -{ - void __iomem *addr, *data; - u32 tmp; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - tmp = readl_relaxed(data); - tmp &= ~value; - writel_relaxed(tmp, data); -} - -static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value) -{ - void __iomem *addr, *data; - - addr = base; - data = base + 0x4; - - writel_relaxed(reg, addr); - writel_relaxed(value, data); -} - -void mv_u3d_phy_shutdown(struct usb_phy *phy) -{ - struct mv_u3d_phy *mv_u3d_phy; - void __iomem *base; - u32 val; - - mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); - base = mv_u3d_phy->base; - - /* Power down Reference Analog current, bit 15 - * Power down PLL, bit 14 - * Power down Receiver, bit 13 - * Power down Transmitter, bit 12 - * of USB3_POWER_PLL_CONTROL register - */ - val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); - val &= ~(USB3_POWER_PLL_CONTROL_PU); - mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); - - if (mv_u3d_phy->clk) - clk_disable(mv_u3d_phy->clk); -} - -static int mv_u3d_phy_init(struct usb_phy *phy) -{ - struct mv_u3d_phy *mv_u3d_phy; - void __iomem *base; - u32 val, count; - - /* enable usb3 phy */ - mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); - - if (mv_u3d_phy->clk) - clk_enable(mv_u3d_phy->clk); - - base = mv_u3d_phy->base; - - val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); - val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK); - val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT; - mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); - udelay(100); - - mv_u3d_phy_write(base, USB3_RESET_CONTROL, - USB3_RESET_CONTROL_RESET_PIPE); - udelay(100); - - mv_u3d_phy_write(base, USB3_RESET_CONTROL, - USB3_RESET_CONTROL_RESET_PIPE - | USB3_RESET_CONTROL_RESET_PHY); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); - val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK - | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK); - val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT) - | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT); - mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); - udelay(100); - - mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL, - USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE); - val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK - | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK - | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK); - val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT) - | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT) - | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT)); - mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_GEN1_SET0); - val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK; - val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT; - mv_u3d_phy_write(base, USB3_GEN1_SET0, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_GEN2_SET0); - val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK - | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK - | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK); - val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT) - | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT) - | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT) - | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT)); - mv_u3d_phy_write(base, USB3_GEN2_SET0, val); - udelay(100); - - mv_u3d_phy_read(base, USB3_TX_EMPPH); - val &= ~(USB3_TX_EMPPH_AMP_MASK - | USB3_TX_EMPPH_EN_MASK - | USB3_TX_EMPPH_AMP_FORCE_MASK - | USB3_TX_EMPPH_PAR1_MASK - | USB3_TX_EMPPH_PAR2_MASK); - val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT) - | (1 << USB3_TX_EMPPH_EN_SHIFT) - | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT) - | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT) - | (1 << USB3_TX_EMPPH_PAR2_SHIFT)); - - mv_u3d_phy_write(base, USB3_TX_EMPPH, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_GEN2_SET1); - val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK - | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK - | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK - | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK); - val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT) - | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT) - | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT) - | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT)); - mv_u3d_phy_write(base, USB3_GEN2_SET1, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN); - val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK; - val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT; - mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC); - val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK; - val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT; - mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL); - val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK; - val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT; - mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE); - val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK - | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK - | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK); - val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT) - | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT)); - mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val); - udelay(100); - - val = mv_u3d_phy_read(base, USB3_TXDETRX); - val &= ~(USB3_TXDETRX_VTHSEL_MASK); - val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT; - mv_u3d_phy_write(base, USB3_TXDETRX, val); - udelay(100); - - dev_dbg(mv_u3d_phy->dev, "start calibration\n"); - -calstart: - /* Perform Manual Calibration */ - mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL, - 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT); - - mdelay(1); - - count = 0; - while (1) { - val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL); - if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT)) - break; - else if (count > 50) { - dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n"); - goto calstart; - } - count++; - mdelay(1); - } - - /* active PIPE interface */ - mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL, - 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE); - - return 0; -} - -static int mv_u3d_phy_probe(struct platform_device *pdev) -{ - struct mv_u3d_phy *mv_u3d_phy; - struct mv_usb_platform_data *pdata; - struct device *dev = &pdev->dev; - struct resource *res; - void __iomem *phy_base; - int ret; - - pdata = pdev->dev.platform_data; - if (!pdata) { - dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); - return -EINVAL; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing mem resource\n"); - return -ENODEV; - } - - phy_base = devm_ioremap_resource(dev, res); - if (IS_ERR(phy_base)) - return PTR_ERR(phy_base); - - mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL); - if (!mv_u3d_phy) - return -ENOMEM; - - mv_u3d_phy->dev = &pdev->dev; - mv_u3d_phy->plat = pdata; - mv_u3d_phy->base = phy_base; - mv_u3d_phy->phy.dev = mv_u3d_phy->dev; - mv_u3d_phy->phy.label = "mv-u3d-phy"; - mv_u3d_phy->phy.init = mv_u3d_phy_init; - mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown; - - ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3); - if (ret) - goto err; - - if (!mv_u3d_phy->clk) - mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy"); - - platform_set_drvdata(pdev, mv_u3d_phy); - - dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n"); -err: - return ret; -} - -static int __exit mv_u3d_phy_remove(struct platform_device *pdev) -{ - struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev); - - usb_remove_phy(&mv_u3d_phy->phy); - - if (mv_u3d_phy->clk) { - clk_put(mv_u3d_phy->clk); - mv_u3d_phy->clk = NULL; - } - - return 0; -} - -static struct platform_driver mv_u3d_phy_driver = { - .probe = mv_u3d_phy_probe, - .remove = mv_u3d_phy_remove, - .driver = { - .name = "mv-u3d-phy", - .owner = THIS_MODULE, - }, -}; - -module_platform_driver(mv_u3d_phy_driver); -MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller"); -MODULE_AUTHOR("Yu Xu "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:mv-u3d-phy"); diff --git a/drivers/usb/phy/mv_u3d_phy.h b/drivers/usb/phy/mv_u3d_phy.h deleted file mode 100644 index 2a658cb..0000000 --- a/drivers/usb/phy/mv_u3d_phy.h +++ /dev/null @@ -1,105 +0,0 @@ -/* - * Copyright (C) 2011 Marvell International Ltd. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms and conditions of the GNU General Public License, - * version 2, as published by the Free Software Foundation. - */ - -#ifndef __MV_U3D_PHY_H -#define __MV_U3D_PHY_H - -#define USB3_POWER_PLL_CONTROL 0x1 -#define USB3_KVCO_CALI_CONTROL 0x2 -#define USB3_IMPEDANCE_CALI_CTRL 0x3 -#define USB3_IMPEDANCE_TX_SSC 0x4 -#define USB3_SQUELCH_FFE 0x6 -#define USB3_GEN1_SET0 0xD -#define USB3_GEN2_SET0 0xF -#define USB3_GEN2_SET1 0x10 -#define USB3_DIGITAL_LOOPBACK_EN 0x23 -#define USB3_PHY_ISOLATION_MODE 0x26 -#define USB3_TXDETRX 0x48 -#define USB3_TX_EMPPH 0x5E -#define USB3_RESET_CONTROL 0x90 -#define USB3_PIPE_SM_CTRL 0x91 - -#define USB3_RESET_CONTROL_RESET_PIPE 0x1 -#define USB3_RESET_CONTROL_RESET_PHY 0x2 - -#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0) -#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0 -#define USB3_PLL_25MHZ 0x2 -#define USB3_PLL_26MHZ 0x5 -#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5) -#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5 -#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12) -#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12 -#define USB3_POWER_PLL_CONTROL_PU (0xF << 12) - -#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12) -#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12 -#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14 -#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15 - -#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF -#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0 -#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4) -#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4 -#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8) -#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8 - -#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15) -#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11 - -#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1) -#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1 -#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6 -#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7) -#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7 -#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11) -#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11 -#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15) -#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15 - -#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0) -#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0 -#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3) -#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3 -#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6) -#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6 -#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8) -#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8 - -#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10) -#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10 - -#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12) -#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12 - -#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0) -#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0 - -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0 -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4) -#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4 -#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8) - -#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4) -#define USB3_TXDETRX_VTHSEL_SHIFT 4 - -#define USB3_TX_EMPPH_AMP_MASK (0xF << 0) -#define USB3_TX_EMPPH_AMP_SHIFT 0 -#define USB3_TX_EMPPH_EN_MASK (0x1 << 6) -#define USB3_TX_EMPPH_EN_SHIFT 6 -#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7) -#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7 -#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8) -#define USB3_TX_EMPPH_PAR1_SHIFT 8 -#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13) -#define USB3_TX_EMPPH_PAR2_SHIFT 13 - -#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15 - -#endif /* __MV_U3D_PHY_H */ diff --git a/drivers/usb/phy/mxs-phy.c b/drivers/usb/phy/mxs-phy.c deleted file mode 100644 index 9d4381e..0000000 --- a/drivers/usb/phy/mxs-phy.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Copyright 2012 Freescale Semiconductor, Inc. - * Copyright (C) 2012 Marek Vasut - * on behalf of DENX Software Engineering GmbH - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define DRIVER_NAME "mxs_phy" - -#define HW_USBPHY_PWD 0x00 -#define HW_USBPHY_CTRL 0x30 -#define HW_USBPHY_CTRL_SET 0x34 -#define HW_USBPHY_CTRL_CLR 0x38 - -#define BM_USBPHY_CTRL_SFTRST BIT(31) -#define BM_USBPHY_CTRL_CLKGATE BIT(30) -#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) -#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) -#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) - -struct mxs_phy { - struct usb_phy phy; - struct clk *clk; -}; - -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) - -static void mxs_phy_hw_init(struct mxs_phy *mxs_phy) -{ - void __iomem *base = mxs_phy->phy.io_priv; - - stmp_reset_block(base + HW_USBPHY_CTRL); - - /* Power up the PHY */ - writel(0, base + HW_USBPHY_PWD); - - /* enable FS/LS device */ - writel(BM_USBPHY_CTRL_ENUTMILEVEL2 | - BM_USBPHY_CTRL_ENUTMILEVEL3, - base + HW_USBPHY_CTRL_SET); -} - -static int mxs_phy_init(struct usb_phy *phy) -{ - struct mxs_phy *mxs_phy = to_mxs_phy(phy); - - clk_prepare_enable(mxs_phy->clk); - mxs_phy_hw_init(mxs_phy); - - return 0; -} - -static void mxs_phy_shutdown(struct usb_phy *phy) -{ - struct mxs_phy *mxs_phy = to_mxs_phy(phy); - - writel(BM_USBPHY_CTRL_CLKGATE, - phy->io_priv + HW_USBPHY_CTRL_SET); - - clk_disable_unprepare(mxs_phy->clk); -} - -static int mxs_phy_suspend(struct usb_phy *x, int suspend) -{ - struct mxs_phy *mxs_phy = to_mxs_phy(x); - - if (suspend) { - writel(0xffffffff, x->io_priv + HW_USBPHY_PWD); - writel(BM_USBPHY_CTRL_CLKGATE, - x->io_priv + HW_USBPHY_CTRL_SET); - clk_disable_unprepare(mxs_phy->clk); - } else { - clk_prepare_enable(mxs_phy->clk); - writel(BM_USBPHY_CTRL_CLKGATE, - x->io_priv + HW_USBPHY_CTRL_CLR); - writel(0, x->io_priv + HW_USBPHY_PWD); - } - - return 0; -} - -static int mxs_phy_on_connect(struct usb_phy *phy, - enum usb_device_speed speed) -{ - dev_dbg(phy->dev, "%s speed device has connected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); - - if (speed == USB_SPEED_HIGH) - writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - phy->io_priv + HW_USBPHY_CTRL_SET); - - return 0; -} - -static int mxs_phy_on_disconnect(struct usb_phy *phy, - enum usb_device_speed speed) -{ - dev_dbg(phy->dev, "%s speed device has disconnected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); - - if (speed == USB_SPEED_HIGH) - writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, - phy->io_priv + HW_USBPHY_CTRL_CLR); - - return 0; -} - -static int mxs_phy_probe(struct platform_device *pdev) -{ - struct resource *res; - void __iomem *base; - struct clk *clk; - struct mxs_phy *mxs_phy; - int ret; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "can't get device resources\n"); - return -ENOENT; - } - - base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(base)) - return PTR_ERR(base); - - clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, - "can't get the clock, err=%ld", PTR_ERR(clk)); - return PTR_ERR(clk); - } - - mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); - if (!mxs_phy) { - dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n"); - return -ENOMEM; - } - - mxs_phy->phy.io_priv = base; - mxs_phy->phy.dev = &pdev->dev; - mxs_phy->phy.label = DRIVER_NAME; - mxs_phy->phy.init = mxs_phy_init; - mxs_phy->phy.shutdown = mxs_phy_shutdown; - mxs_phy->phy.set_suspend = mxs_phy_suspend; - mxs_phy->phy.notify_connect = mxs_phy_on_connect; - mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; - - ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); - - mxs_phy->clk = clk; - - platform_set_drvdata(pdev, &mxs_phy->phy); - - ret = usb_add_phy_dev(&mxs_phy->phy); - if (ret) - return ret; - - return 0; -} - -static int mxs_phy_remove(struct platform_device *pdev) -{ - struct mxs_phy *mxs_phy = platform_get_drvdata(pdev); - - usb_remove_phy(&mxs_phy->phy); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static const struct of_device_id mxs_phy_dt_ids[] = { - { .compatible = "fsl,imx23-usbphy", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); - -static struct platform_driver mxs_phy_driver = { - .probe = mxs_phy_probe, - .remove = mxs_phy_remove, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - .of_match_table = mxs_phy_dt_ids, - }, -}; - -static int __init mxs_phy_module_init(void) -{ - return platform_driver_register(&mxs_phy_driver); -} -postcore_initcall(mxs_phy_module_init); - -static void __exit mxs_phy_module_exit(void) -{ - platform_driver_unregister(&mxs_phy_driver); -} -module_exit(mxs_phy_module_exit); - -MODULE_ALIAS("platform:mxs-usb-phy"); -MODULE_AUTHOR("Marek Vasut "); -MODULE_AUTHOR("Richard Zhao "); -MODULE_DESCRIPTION("Freescale MXS USB PHY driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/nop-usb-xceiv.c b/drivers/usb/phy/nop-usb-xceiv.c deleted file mode 100644 index 2b10cc9..0000000 --- a/drivers/usb/phy/nop-usb-xceiv.c +++ /dev/null @@ -1,294 +0,0 @@ -/* - * drivers/usb/otg/nop-usb-xceiv.c - * - * NOP USB transceiver for all USB transceiver which are either built-in - * into USB IP or which are mostly autonomous. - * - * Copyright (C) 2009 Texas Instruments Inc - * Author: Ajay Kumar Gupta - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Current status: - * This provides a "nop" transceiver for PHYs which are - * autonomous such as isp1504, isp1707, etc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct nop_usb_xceiv { - struct usb_phy phy; - struct device *dev; - struct clk *clk; - struct regulator *vcc; - struct regulator *reset; -}; - -static struct platform_device *pd; - -void usb_nop_xceiv_register(void) -{ - if (pd) - return; - pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0); - if (!pd) { - printk(KERN_ERR "Unable to register usb nop transceiver\n"); - return; - } -} -EXPORT_SYMBOL(usb_nop_xceiv_register); - -void usb_nop_xceiv_unregister(void) -{ - platform_device_unregister(pd); - pd = NULL; -} -EXPORT_SYMBOL(usb_nop_xceiv_unregister); - -static int nop_set_suspend(struct usb_phy *x, int suspend) -{ - return 0; -} - -static int nop_init(struct usb_phy *phy) -{ - struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); - - if (!IS_ERR(nop->vcc)) { - if (regulator_enable(nop->vcc)) - dev_err(phy->dev, "Failed to enable power\n"); - } - - if (!IS_ERR(nop->clk)) - clk_enable(nop->clk); - - if (!IS_ERR(nop->reset)) { - /* De-assert RESET */ - if (regulator_enable(nop->reset)) - dev_err(phy->dev, "Failed to de-assert reset\n"); - } - - return 0; -} - -static void nop_shutdown(struct usb_phy *phy) -{ - struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); - - if (!IS_ERR(nop->reset)) { - /* Assert RESET */ - if (regulator_disable(nop->reset)) - dev_err(phy->dev, "Failed to assert reset\n"); - } - - if (!IS_ERR(nop->clk)) - clk_disable(nop->clk); - - if (!IS_ERR(nop->vcc)) { - if (regulator_disable(nop->vcc)) - dev_err(phy->dev, "Failed to disable power\n"); - } -} - -static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) -{ - if (!otg) - return -ENODEV; - - if (!gadget) { - otg->gadget = NULL; - return -ENODEV; - } - - otg->gadget = gadget; - otg->phy->state = OTG_STATE_B_IDLE; - return 0; -} - -static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - if (!host) { - otg->host = NULL; - return -ENODEV; - } - - otg->host = host; - return 0; -} - -static int nop_usb_xceiv_probe(struct platform_device *pdev) -{ - struct device *dev = &pdev->dev; - struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data; - struct nop_usb_xceiv *nop; - enum usb_phy_type type = USB_PHY_TYPE_USB2; - int err; - u32 clk_rate = 0; - bool needs_vcc = false; - bool needs_reset = false; - - nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL); - if (!nop) - return -ENOMEM; - - nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg), - GFP_KERNEL); - if (!nop->phy.otg) - return -ENOMEM; - - if (dev->of_node) { - struct device_node *node = dev->of_node; - - if (of_property_read_u32(node, "clock-frequency", &clk_rate)) - clk_rate = 0; - - needs_vcc = of_property_read_bool(node, "vcc-supply"); - needs_reset = of_property_read_bool(node, "reset-supply"); - - } else if (pdata) { - type = pdata->type; - clk_rate = pdata->clk_rate; - needs_vcc = pdata->needs_vcc; - needs_reset = pdata->needs_reset; - } - - nop->clk = devm_clk_get(&pdev->dev, "main_clk"); - if (IS_ERR(nop->clk)) { - dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n", - PTR_ERR(nop->clk)); - } - - if (!IS_ERR(nop->clk) && clk_rate) { - err = clk_set_rate(nop->clk, clk_rate); - if (err) { - dev_err(&pdev->dev, "Error setting clock rate\n"); - return err; - } - } - - if (!IS_ERR(nop->clk)) { - err = clk_prepare(nop->clk); - if (err) { - dev_err(&pdev->dev, "Error preparing clock\n"); - return err; - } - } - - nop->vcc = devm_regulator_get(&pdev->dev, "vcc"); - if (IS_ERR(nop->vcc)) { - dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n", - PTR_ERR(nop->vcc)); - if (needs_vcc) - return -EPROBE_DEFER; - } - - nop->reset = devm_regulator_get(&pdev->dev, "reset"); - if (IS_ERR(nop->reset)) { - dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n", - PTR_ERR(nop->reset)); - if (needs_reset) - return -EPROBE_DEFER; - } - - nop->dev = &pdev->dev; - nop->phy.dev = nop->dev; - nop->phy.label = "nop-xceiv"; - nop->phy.set_suspend = nop_set_suspend; - nop->phy.init = nop_init; - nop->phy.shutdown = nop_shutdown; - nop->phy.state = OTG_STATE_UNDEFINED; - nop->phy.type = type; - - nop->phy.otg->phy = &nop->phy; - nop->phy.otg->set_host = nop_set_host; - nop->phy.otg->set_peripheral = nop_set_peripheral; - - err = usb_add_phy_dev(&nop->phy); - if (err) { - dev_err(&pdev->dev, "can't register transceiver, err: %d\n", - err); - goto err_add; - } - - platform_set_drvdata(pdev, nop); - - ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier); - - return 0; - -err_add: - if (!IS_ERR(nop->clk)) - clk_unprepare(nop->clk); - return err; -} - -static int nop_usb_xceiv_remove(struct platform_device *pdev) -{ - struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); - - if (!IS_ERR(nop->clk)) - clk_unprepare(nop->clk); - - usb_remove_phy(&nop->phy); - - platform_set_drvdata(pdev, NULL); - - return 0; -} - -static const struct of_device_id nop_xceiv_dt_ids[] = { - { .compatible = "usb-nop-xceiv" }, - { } -}; - -MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); - -static struct platform_driver nop_usb_xceiv_driver = { - .probe = nop_usb_xceiv_probe, - .remove = nop_usb_xceiv_remove, - .driver = { - .name = "nop_usb_xceiv", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(nop_xceiv_dt_ids), - }, -}; - -static int __init nop_usb_xceiv_init(void) -{ - return platform_driver_register(&nop_usb_xceiv_driver); -} -subsys_initcall(nop_usb_xceiv_init); - -static void __exit nop_usb_xceiv_exit(void) -{ - platform_driver_unregister(&nop_usb_xceiv_driver); -} -module_exit(nop_usb_xceiv_exit); - -MODULE_ALIAS("platform:nop_usb_xceiv"); -MODULE_AUTHOR("Texas Instruments Inc"); -MODULE_DESCRIPTION("NOP USB Transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/omap-control-usb.c b/drivers/usb/phy/omap-control-usb.c deleted file mode 100644 index 1419ced..0000000 --- a/drivers/usb/phy/omap-control-usb.c +++ /dev/null @@ -1,289 +0,0 @@ -/* - * omap-control-usb.c - The USB part of control module. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -static struct omap_control_usb *control_usb; - -/** - * omap_get_control_dev - returns the device pointer for this control device - * - * This API should be called to get the device pointer for this control - * module device. This device pointer should be used for called other - * exported API's in this driver. - * - * To be used by PHY driver and glue driver. - */ -struct device *omap_get_control_dev(void) -{ - if (!control_usb) - return ERR_PTR(-ENODEV); - - return control_usb->dev; -} -EXPORT_SYMBOL_GPL(omap_get_control_dev); - -/** - * omap_control_usb3_phy_power - power on/off the serializer using control - * module - * @dev: the control module device - * @on: 0 to off and 1 to on based on powering on or off the PHY - * - * usb3 PHY driver should call this API to power on or off the PHY. - */ -void omap_control_usb3_phy_power(struct device *dev, bool on) -{ - u32 val; - unsigned long rate; - struct omap_control_usb *control_usb = dev_get_drvdata(dev); - - if (control_usb->type != OMAP_CTRL_DEV_TYPE2) - return; - - rate = clk_get_rate(control_usb->sys_clk); - rate = rate/1000000; - - val = readl(control_usb->phy_power); - - if (on) { - val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; - } else { - val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - } - - writel(val, control_usb->phy_power); -} -EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power); - -/** - * omap_control_usb_phy_power - power on/off the phy using control module reg - * @dev: the control module device - * @on: 0 or 1, based on powering on or off the PHY - */ -void omap_control_usb_phy_power(struct device *dev, int on) -{ - u32 val; - struct omap_control_usb *control_usb = dev_get_drvdata(dev); - - val = readl(control_usb->dev_conf); - - if (on) - val &= ~OMAP_CTRL_DEV_PHY_PD; - else - val |= OMAP_CTRL_DEV_PHY_PD; - - writel(val, control_usb->dev_conf); -} -EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); - -/** - * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core that a usb - * device has been connected. - */ -static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); - val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high - * impedance - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core that it has been - * connected to a usb host. - */ -static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~OMAP_CTRL_DEV_SESSEND; - val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | - OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high - * impedance - * @ctrl_usb: struct omap_control_usb * - * - * Writes to the mailbox register to notify the usb core it's now in - * disconnected state. - */ -static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) -{ - u32 val; - - val = readl(ctrl_usb->otghs_control); - val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); - val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; - writel(val, ctrl_usb->otghs_control); -} - -/** - * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode - * or device mode or to denote disconnected state - * @dev: the control module device - * @mode: The mode to which usb should be configured - * - * This is an API to write to the mailbox register to notify the usb core that - * a usb device has been connected. - */ -void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode) -{ - struct omap_control_usb *ctrl_usb; - - if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1) - return; - - ctrl_usb = dev_get_drvdata(dev); - - switch (mode) { - case USB_MODE_HOST: - omap_control_usb_host_mode(ctrl_usb); - break; - case USB_MODE_DEVICE: - omap_control_usb_device_mode(ctrl_usb); - break; - case USB_MODE_DISCONNECT: - omap_control_usb_set_sessionend(ctrl_usb); - break; - default: - dev_vdbg(dev, "invalid omap control usb mode\n"); - } -} -EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); - -static int omap_control_usb_probe(struct platform_device *pdev) -{ - struct resource *res; - struct device_node *np = pdev->dev.of_node; - struct omap_control_usb_platform_data *pdata = pdev->dev.platform_data; - - control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), - GFP_KERNEL); - if (!control_usb) { - dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); - return -ENOMEM; - } - - if (np) { - of_property_read_u32(np, "ti,type", &control_usb->type); - } else if (pdata) { - control_usb->type = pdata->type; - } else { - dev_err(&pdev->dev, "no pdata present\n"); - return -EINVAL; - } - - control_usb->dev = &pdev->dev; - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "control_dev_conf"); - control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(control_usb->dev_conf)) - return PTR_ERR(control_usb->dev_conf); - - if (control_usb->type == OMAP_CTRL_DEV_TYPE1) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "otghs_control"); - control_usb->otghs_control = devm_ioremap_resource( - &pdev->dev, res); - if (IS_ERR(control_usb->otghs_control)) - return PTR_ERR(control_usb->otghs_control); - } - - if (control_usb->type == OMAP_CTRL_DEV_TYPE2) { - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, - "phy_power_usb"); - control_usb->phy_power = devm_ioremap_resource( - &pdev->dev, res); - if (IS_ERR(control_usb->phy_power)) - return PTR_ERR(control_usb->phy_power); - - control_usb->sys_clk = devm_clk_get(control_usb->dev, - "sys_clkin"); - if (IS_ERR(control_usb->sys_clk)) { - pr_err("%s: unable to get sys_clkin\n", __func__); - return -EINVAL; - } - } - - - dev_set_drvdata(control_usb->dev, control_usb); - - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id omap_control_usb_id_table[] = { - { .compatible = "ti,omap-control-usb" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); -#endif - -static struct platform_driver omap_control_usb_driver = { - .probe = omap_control_usb_probe, - .driver = { - .name = "omap-control-usb", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(omap_control_usb_id_table), - }, -}; - -static int __init omap_control_usb_init(void) -{ - return platform_driver_register(&omap_control_usb_driver); -} -subsys_initcall(omap_control_usb_init); - -static void __exit omap_control_usb_exit(void) -{ - platform_driver_unregister(&omap_control_usb_driver); -} -module_exit(omap_control_usb_exit); - -MODULE_ALIAS("platform: omap_control_usb"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP Control Module USB Driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/omap-usb2.c b/drivers/usb/phy/omap-usb2.c deleted file mode 100644 index 844ab68..0000000 --- a/drivers/usb/phy/omap-usb2.c +++ /dev/null @@ -1,273 +0,0 @@ -/* - * omap-usb2.c - USB PHY, talking to musb controller in OMAP. - * - * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/** - * omap_usb2_set_comparator - links the comparator present in the sytem with - * this phy - * @comparator - the companion phy(comparator) for this phy - * - * The phy companion driver should call this API passing the phy_companion - * filled with set_vbus and start_srp to be used by usb phy. - * - * For use by phy companion driver - */ -int omap_usb2_set_comparator(struct phy_companion *comparator) -{ - struct omap_usb *phy; - struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); - - if (IS_ERR(x)) - return -ENODEV; - - phy = phy_to_omapusb(x); - phy->comparator = comparator; - return 0; -} -EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); - -static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) -{ - struct omap_usb *phy = phy_to_omapusb(otg->phy); - - if (!phy->comparator) - return -ENODEV; - - return phy->comparator->set_vbus(phy->comparator, enabled); -} - -static int omap_usb_start_srp(struct usb_otg *otg) -{ - struct omap_usb *phy = phy_to_omapusb(otg->phy); - - if (!phy->comparator) - return -ENODEV; - - return phy->comparator->start_srp(phy->comparator); -} - -static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct usb_phy *phy = otg->phy; - - otg->host = host; - if (!host) - phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int omap_usb_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - struct usb_phy *phy = otg->phy; - - otg->gadget = gadget; - if (!gadget) - phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int omap_usb2_suspend(struct usb_phy *x, int suspend) -{ - u32 ret; - struct omap_usb *phy = phy_to_omapusb(x); - - if (suspend && !phy->is_suspended) { - omap_control_usb_phy_power(phy->control_dev, 0); - pm_runtime_put_sync(phy->dev); - phy->is_suspended = 1; - } else if (!suspend && phy->is_suspended) { - ret = pm_runtime_get_sync(phy->dev); - if (ret < 0) { - dev_err(phy->dev, "get_sync failed with err %d\n", - ret); - return ret; - } - omap_control_usb_phy_power(phy->control_dev, 1); - phy->is_suspended = 0; - } - - return 0; -} - -static int omap_usb2_probe(struct platform_device *pdev) -{ - struct omap_usb *phy; - struct usb_otg *otg; - - phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); - return -ENOMEM; - } - - otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); - if (!otg) { - dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); - return -ENOMEM; - } - - phy->dev = &pdev->dev; - - phy->phy.dev = phy->dev; - phy->phy.label = "omap-usb2"; - phy->phy.set_suspend = omap_usb2_suspend; - phy->phy.otg = otg; - phy->phy.type = USB_PHY_TYPE_USB2; - - phy->control_dev = omap_get_control_dev(); - if (IS_ERR(phy->control_dev)) { - dev_dbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; - } - - phy->is_suspended = 1; - omap_control_usb_phy_power(phy->control_dev, 0); - - otg->set_host = omap_usb_set_host; - otg->set_peripheral = omap_usb_set_peripheral; - otg->set_vbus = omap_usb_set_vbus; - otg->start_srp = omap_usb_start_srp; - otg->phy = &phy->phy; - - phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); - if (IS_ERR(phy->wkupclk)) { - dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); - return PTR_ERR(phy->wkupclk); - } - clk_prepare(phy->wkupclk); - - phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); - if (IS_ERR(phy->optclk)) - dev_vdbg(&pdev->dev, "unable to get refclk960m\n"); - else - clk_prepare(phy->optclk); - - usb_add_phy_dev(&phy->phy); - - platform_set_drvdata(pdev, phy); - - pm_runtime_enable(phy->dev); - - return 0; -} - -static int omap_usb2_remove(struct platform_device *pdev) -{ - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_unprepare(phy->wkupclk); - if (!IS_ERR(phy->optclk)) - clk_unprepare(phy->optclk); - usb_remove_phy(&phy->phy); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME - -static int omap_usb2_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_disable(phy->wkupclk); - if (!IS_ERR(phy->optclk)) - clk_disable(phy->optclk); - - return 0; -} - -static int omap_usb2_runtime_resume(struct device *dev) -{ - u32 ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - ret = clk_enable(phy->wkupclk); - if (ret < 0) { - dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); - goto err0; - } - - if (!IS_ERR(phy->optclk)) { - ret = clk_enable(phy->optclk); - if (ret < 0) { - dev_err(phy->dev, "Failed to enable optclk %d\n", ret); - goto err1; - } - } - - return 0; - -err1: - clk_disable(phy->wkupclk); - -err0: - return ret; -} - -static const struct dev_pm_ops omap_usb2_pm_ops = { - SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, - NULL) -}; - -#define DEV_PM_OPS (&omap_usb2_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - -#ifdef CONFIG_OF -static const struct of_device_id omap_usb2_id_table[] = { - { .compatible = "ti,omap-usb2" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_usb2_id_table); -#endif - -static struct platform_driver omap_usb2_driver = { - .probe = omap_usb2_probe, - .remove = omap_usb2_remove, - .driver = { - .name = "omap-usb2", - .owner = THIS_MODULE, - .pm = DEV_PM_OPS, - .of_match_table = of_match_ptr(omap_usb2_id_table), - }, -}; - -module_platform_driver(omap_usb2_driver); - -MODULE_ALIAS("platform: omap_usb2"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP USB2 phy driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/omap-usb3.c b/drivers/usb/phy/omap-usb3.c deleted file mode 100644 index a6e60b1..0000000 --- a/drivers/usb/phy/omap-usb3.c +++ /dev/null @@ -1,353 +0,0 @@ -/* - * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define NUM_SYS_CLKS 5 -#define PLL_STATUS 0x00000004 -#define PLL_GO 0x00000008 -#define PLL_CONFIGURATION1 0x0000000C -#define PLL_CONFIGURATION2 0x00000010 -#define PLL_CONFIGURATION3 0x00000014 -#define PLL_CONFIGURATION4 0x00000020 - -#define PLL_REGM_MASK 0x001FFE00 -#define PLL_REGM_SHIFT 0x9 -#define PLL_REGM_F_MASK 0x0003FFFF -#define PLL_REGM_F_SHIFT 0x0 -#define PLL_REGN_MASK 0x000001FE -#define PLL_REGN_SHIFT 0x1 -#define PLL_SELFREQDCO_MASK 0x0000000E -#define PLL_SELFREQDCO_SHIFT 0x1 -#define PLL_SD_MASK 0x0003FC00 -#define PLL_SD_SHIFT 0x9 -#define SET_PLL_GO 0x1 -#define PLL_TICOPWDN 0x10000 -#define PLL_LOCK 0x2 -#define PLL_IDLE 0x1 - -/* - * This is an Empirical value that works, need to confirm the actual - * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status - * to be correctly reflected in the USB3PHY_PLL_STATUS register. - */ -# define PLL_IDLE_TIME 100; - -enum sys_clk_rate { - CLK_RATE_UNDEFINED = -1, - CLK_RATE_12MHZ, - CLK_RATE_16MHZ, - CLK_RATE_19MHZ, - CLK_RATE_26MHZ, - CLK_RATE_38MHZ -}; - -static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = { - {1250, 5, 4, 20, 0}, /* 12 MHz */ - {3125, 20, 4, 20, 0}, /* 16.8 MHz */ - {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ - {1250, 12, 4, 20, 0}, /* 26 MHz */ - {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ -}; - -static int omap_usb3_suspend(struct usb_phy *x, int suspend) -{ - struct omap_usb *phy = phy_to_omapusb(x); - int val; - int timeout = PLL_IDLE_TIME; - - if (suspend && !phy->is_suspended) { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val |= PLL_IDLE; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_TICOPWDN) - break; - udelay(1); - } while (--timeout); - - omap_control_usb3_phy_power(phy->control_dev, 0); - - phy->is_suspended = 1; - } else if (!suspend && phy->is_suspended) { - phy->is_suspended = 0; - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_IDLE; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (!(val & PLL_TICOPWDN)) - break; - udelay(1); - } while (--timeout); - } - - return 0; -} - -static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate) -{ - switch (rate) { - case 12000000: - return CLK_RATE_12MHZ; - case 16800000: - return CLK_RATE_16MHZ; - case 19200000: - return CLK_RATE_19MHZ; - case 26000000: - return CLK_RATE_26MHZ; - case 38400000: - return CLK_RATE_38MHZ; - default: - return CLK_RATE_UNDEFINED; - } -} - -static void omap_usb_dpll_relock(struct omap_usb *phy) -{ - u32 val; - unsigned long timeout; - - omap_usb_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); - - timeout = jiffies + msecs_to_jiffies(20); - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_LOCK) - break; - } while (!WARN_ON(time_after(jiffies, timeout))); -} - -static int omap_usb_dpll_lock(struct omap_usb *phy) -{ - u32 val; - unsigned long rate; - enum sys_clk_rate clk_index; - - rate = clk_get_rate(phy->sys_clk); - clk_index = __get_sys_clk_index(rate); - - if (clk_index == CLK_RATE_UNDEFINED) { - pr_err("dpll cannot be locked for sys clk freq:%luHz\n", rate); - return -EINVAL; - } - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGN_MASK; - val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_SELFREQDCO_MASK; - val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGM_MASK; - val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); - val &= ~PLL_REGM_F_MASK; - val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); - val &= ~PLL_SD_MASK; - val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); - - omap_usb_dpll_relock(phy); - - return 0; -} - -static int omap_usb3_init(struct usb_phy *x) -{ - struct omap_usb *phy = phy_to_omapusb(x); - - omap_usb_dpll_lock(phy); - omap_control_usb3_phy_power(phy->control_dev, 1); - - return 0; -} - -static int omap_usb3_probe(struct platform_device *pdev) -{ - struct omap_usb *phy; - struct resource *res; - - phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - dev_err(&pdev->dev, "unable to alloc mem for OMAP USB3 PHY\n"); - return -ENOMEM; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); - phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(phy->pll_ctrl_base)) - return PTR_ERR(phy->pll_ctrl_base); - - phy->dev = &pdev->dev; - - phy->phy.dev = phy->dev; - phy->phy.label = "omap-usb3"; - phy->phy.init = omap_usb3_init; - phy->phy.set_suspend = omap_usb3_suspend; - phy->phy.type = USB_PHY_TYPE_USB3; - - phy->is_suspended = 1; - phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); - if (IS_ERR(phy->wkupclk)) { - dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); - return PTR_ERR(phy->wkupclk); - } - clk_prepare(phy->wkupclk); - - phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); - if (IS_ERR(phy->optclk)) { - dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n"); - return PTR_ERR(phy->optclk); - } - clk_prepare(phy->optclk); - - phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin"); - if (IS_ERR(phy->sys_clk)) { - pr_err("%s: unable to get sys_clkin\n", __func__); - return -EINVAL; - } - - phy->control_dev = omap_get_control_dev(); - if (IS_ERR(phy->control_dev)) { - dev_dbg(&pdev->dev, "Failed to get control device\n"); - return -ENODEV; - } - - omap_control_usb3_phy_power(phy->control_dev, 0); - usb_add_phy_dev(&phy->phy); - - platform_set_drvdata(pdev, phy); - - pm_runtime_enable(phy->dev); - pm_runtime_get(&pdev->dev); - - return 0; -} - -static int omap_usb3_remove(struct platform_device *pdev) -{ - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_unprepare(phy->wkupclk); - clk_unprepare(phy->optclk); - usb_remove_phy(&phy->phy); - if (!pm_runtime_suspended(&pdev->dev)) - pm_runtime_put(&pdev->dev); - pm_runtime_disable(&pdev->dev); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME - -static int omap_usb3_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_disable(phy->wkupclk); - clk_disable(phy->optclk); - - return 0; -} - -static int omap_usb3_runtime_resume(struct device *dev) -{ - u32 ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - ret = clk_enable(phy->optclk); - if (ret) { - dev_err(phy->dev, "Failed to enable optclk %d\n", ret); - goto err1; - } - - ret = clk_enable(phy->wkupclk); - if (ret) { - dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); - goto err2; - } - - return 0; - -err2: - clk_disable(phy->optclk); - -err1: - return ret; -} - -static const struct dev_pm_ops omap_usb3_pm_ops = { - SET_RUNTIME_PM_OPS(omap_usb3_runtime_suspend, omap_usb3_runtime_resume, - NULL) -}; - -#define DEV_PM_OPS (&omap_usb3_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - -#ifdef CONFIG_OF -static const struct of_device_id omap_usb3_id_table[] = { - { .compatible = "ti,omap-usb3" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_usb3_id_table); -#endif - -static struct platform_driver omap_usb3_driver = { - .probe = omap_usb3_probe, - .remove = omap_usb3_remove, - .driver = { - .name = "omap-usb3", - .owner = THIS_MODULE, - .pm = DEV_PM_OPS, - .of_match_table = of_match_ptr(omap_usb3_id_table), - }, -}; - -module_platform_driver(omap_usb3_driver); - -MODULE_ALIAS("platform: omap_usb3"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP USB3 phy driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/otg_fsm.c b/drivers/usb/phy/otg_fsm.c deleted file mode 100644 index 1f729a1..0000000 --- a/drivers/usb/phy/otg_fsm.c +++ /dev/null @@ -1,348 +0,0 @@ -/* - * OTG Finite State Machine from OTG spec - * - * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. - * - * Author: Li Yang - * Jerry Huang - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include -#include - -#include "otg_fsm.h" - -/* Change USB protocol when there is a protocol change */ -static int otg_set_protocol(struct otg_fsm *fsm, int protocol) -{ - int ret = 0; - - if (fsm->protocol != protocol) { - VDBG("Changing role fsm->protocol= %d; new protocol= %d\n", - fsm->protocol, protocol); - /* stop old protocol */ - if (fsm->protocol == PROTO_HOST) - ret = fsm->ops->start_host(fsm, 0); - else if (fsm->protocol == PROTO_GADGET) - ret = fsm->ops->start_gadget(fsm, 0); - if (ret) - return ret; - - /* start new protocol */ - if (protocol == PROTO_HOST) - ret = fsm->ops->start_host(fsm, 1); - else if (protocol == PROTO_GADGET) - ret = fsm->ops->start_gadget(fsm, 1); - if (ret) - return ret; - - fsm->protocol = protocol; - return 0; - } - - return 0; -} - -static int state_changed; - -/* Called when leaving a state. Do state clean up jobs here */ -void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) -{ - switch (old_state) { - case OTG_STATE_B_IDLE: - otg_del_timer(fsm, b_se0_srp_tmr); - fsm->b_se0_srp = 0; - break; - case OTG_STATE_B_SRP_INIT: - fsm->b_srp_done = 0; - break; - case OTG_STATE_B_PERIPHERAL: - break; - case OTG_STATE_B_WAIT_ACON: - otg_del_timer(fsm, b_ase0_brst_tmr); - fsm->b_ase0_brst_tmout = 0; - break; - case OTG_STATE_B_HOST: - break; - case OTG_STATE_A_IDLE: - break; - case OTG_STATE_A_WAIT_VRISE: - otg_del_timer(fsm, a_wait_vrise_tmr); - fsm->a_wait_vrise_tmout = 0; - break; - case OTG_STATE_A_WAIT_BCON: - otg_del_timer(fsm, a_wait_bcon_tmr); - fsm->a_wait_bcon_tmout = 0; - break; - case OTG_STATE_A_HOST: - otg_del_timer(fsm, a_wait_enum_tmr); - break; - case OTG_STATE_A_SUSPEND: - otg_del_timer(fsm, a_aidl_bdis_tmr); - fsm->a_aidl_bdis_tmout = 0; - fsm->a_suspend_req = 0; - break; - case OTG_STATE_A_PERIPHERAL: - break; - case OTG_STATE_A_WAIT_VFALL: - otg_del_timer(fsm, a_wait_vrise_tmr); - break; - case OTG_STATE_A_VBUS_ERR: - break; - default: - break; - } -} - -/* Called when entering a state */ -int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) -{ - state_changed = 1; - if (fsm->otg->phy->state == new_state) - return 0; - VDBG("Set state: %s\n", usb_otg_state_string(new_state)); - otg_leave_state(fsm, fsm->otg->phy->state); - switch (new_state) { - case OTG_STATE_B_IDLE: - otg_drv_vbus(fsm, 0); - otg_chrg_vbus(fsm, 0); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_UNDEF); - otg_add_timer(fsm, b_se0_srp_tmr); - break; - case OTG_STATE_B_SRP_INIT: - otg_start_pulse(fsm); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_UNDEF); - otg_add_timer(fsm, b_srp_fail_tmr); - break; - case OTG_STATE_B_PERIPHERAL: - otg_chrg_vbus(fsm, 0); - otg_loc_conn(fsm, 1); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_GADGET); - break; - case OTG_STATE_B_WAIT_ACON: - otg_chrg_vbus(fsm, 0); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, b_ase0_brst_tmr); - fsm->a_bus_suspend = 0; - break; - case OTG_STATE_B_HOST: - otg_chrg_vbus(fsm, 0); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 1); - otg_set_protocol(fsm, PROTO_HOST); - usb_bus_start_enum(fsm->otg->host, - fsm->otg->host->otg_port); - break; - case OTG_STATE_A_IDLE: - otg_drv_vbus(fsm, 0); - otg_chrg_vbus(fsm, 0); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_HOST); - break; - case OTG_STATE_A_WAIT_VRISE: - otg_drv_vbus(fsm, 1); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, a_wait_vrise_tmr); - break; - case OTG_STATE_A_WAIT_BCON: - otg_drv_vbus(fsm, 1); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, a_wait_bcon_tmr); - break; - case OTG_STATE_A_HOST: - otg_drv_vbus(fsm, 1); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 1); - otg_set_protocol(fsm, PROTO_HOST); - /* - * When HNP is triggered while a_bus_req = 0, a_host will - * suspend too fast to complete a_set_b_hnp_en - */ - if (!fsm->a_bus_req || fsm->a_suspend_req) - otg_add_timer(fsm, a_wait_enum_tmr); - break; - case OTG_STATE_A_SUSPEND: - otg_drv_vbus(fsm, 1); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_HOST); - otg_add_timer(fsm, a_aidl_bdis_tmr); - - break; - case OTG_STATE_A_PERIPHERAL: - otg_loc_conn(fsm, 1); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_GADGET); - otg_drv_vbus(fsm, 1); - break; - case OTG_STATE_A_WAIT_VFALL: - otg_drv_vbus(fsm, 0); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_HOST); - break; - case OTG_STATE_A_VBUS_ERR: - otg_drv_vbus(fsm, 0); - otg_loc_conn(fsm, 0); - otg_loc_sof(fsm, 0); - otg_set_protocol(fsm, PROTO_UNDEF); - break; - default: - break; - } - - fsm->otg->phy->state = new_state; - return 0; -} - -/* State change judgement */ -int otg_statemachine(struct otg_fsm *fsm) -{ - enum usb_otg_state state; - unsigned long flags; - - spin_lock_irqsave(&fsm->lock, flags); - - state = fsm->otg->phy->state; - state_changed = 0; - /* State machine state change judgement */ - - switch (state) { - case OTG_STATE_UNDEFINED: - VDBG("fsm->id = %d\n", fsm->id); - if (fsm->id) - otg_set_state(fsm, OTG_STATE_B_IDLE); - else - otg_set_state(fsm, OTG_STATE_A_IDLE); - break; - case OTG_STATE_B_IDLE: - if (!fsm->id) - otg_set_state(fsm, OTG_STATE_A_IDLE); - else if (fsm->b_sess_vld && fsm->otg->gadget) - otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); - else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp) - otg_set_state(fsm, OTG_STATE_B_SRP_INIT); - break; - case OTG_STATE_B_SRP_INIT: - if (!fsm->id || fsm->b_srp_done) - otg_set_state(fsm, OTG_STATE_B_IDLE); - break; - case OTG_STATE_B_PERIPHERAL: - if (!fsm->id || !fsm->b_sess_vld) - otg_set_state(fsm, OTG_STATE_B_IDLE); - else if (fsm->b_bus_req && fsm->otg-> - gadget->b_hnp_enable && fsm->a_bus_suspend) - otg_set_state(fsm, OTG_STATE_B_WAIT_ACON); - break; - case OTG_STATE_B_WAIT_ACON: - if (fsm->a_conn) - otg_set_state(fsm, OTG_STATE_B_HOST); - else if (!fsm->id || !fsm->b_sess_vld) - otg_set_state(fsm, OTG_STATE_B_IDLE); - else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) { - fsm->b_ase0_brst_tmout = 0; - otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); - } - break; - case OTG_STATE_B_HOST: - if (!fsm->id || !fsm->b_sess_vld) - otg_set_state(fsm, OTG_STATE_B_IDLE); - else if (!fsm->b_bus_req || !fsm->a_conn) - otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); - break; - case OTG_STATE_A_IDLE: - if (fsm->id) - otg_set_state(fsm, OTG_STATE_B_IDLE); - else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det)) - otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE); - break; - case OTG_STATE_A_WAIT_VRISE: - if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld || - fsm->a_wait_vrise_tmout) { - otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); - } - break; - case OTG_STATE_A_WAIT_BCON: - if (!fsm->a_vbus_vld) - otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); - else if (fsm->b_conn) - otg_set_state(fsm, OTG_STATE_A_HOST); - else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout) - otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); - break; - case OTG_STATE_A_HOST: - if ((!fsm->a_bus_req || fsm->a_suspend_req) && - fsm->otg->host->b_hnp_enable) - otg_set_state(fsm, OTG_STATE_A_SUSPEND); - else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop) - otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); - else if (!fsm->a_vbus_vld) - otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); - break; - case OTG_STATE_A_SUSPEND: - if (!fsm->b_conn && fsm->otg->host->b_hnp_enable) - otg_set_state(fsm, OTG_STATE_A_PERIPHERAL); - else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable) - otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); - else if (fsm->a_bus_req || fsm->b_bus_resume) - otg_set_state(fsm, OTG_STATE_A_HOST); - else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout) - otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); - else if (!fsm->a_vbus_vld) - otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); - break; - case OTG_STATE_A_PERIPHERAL: - if (fsm->id || fsm->a_bus_drop) - otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); - else if (fsm->b_bus_suspend) - otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); - else if (!fsm->a_vbus_vld) - otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); - break; - case OTG_STATE_A_WAIT_VFALL: - if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld && - !fsm->b_conn)) - otg_set_state(fsm, OTG_STATE_A_IDLE); - break; - case OTG_STATE_A_VBUS_ERR: - if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err) - otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); - break; - default: - break; - } - spin_unlock_irqrestore(&fsm->lock, flags); - - VDBG("quit statemachine, changed = %d\n", state_changed); - return state_changed; -} diff --git a/drivers/usb/phy/otg_fsm.h b/drivers/usb/phy/otg_fsm.h deleted file mode 100644 index c30a2e1..0000000 --- a/drivers/usb/phy/otg_fsm.h +++ /dev/null @@ -1,154 +0,0 @@ -/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#undef DEBUG -#undef VERBOSE - -#ifdef DEBUG -#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt , \ - __func__, ## args) -#else -#define DBG(fmt, args...) do {} while (0) -#endif - -#ifdef VERBOSE -#define VDBG DBG -#else -#define VDBG(stuff...) do {} while (0) -#endif - -#ifdef VERBOSE -#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__) -#else -#define MPC_LOC do {} while (0) -#endif - -#define PROTO_UNDEF (0) -#define PROTO_HOST (1) -#define PROTO_GADGET (2) - -/* OTG state machine according to the OTG spec */ -struct otg_fsm { - /* Input */ - int a_bus_resume; - int a_bus_suspend; - int a_conn; - int a_sess_vld; - int a_srp_det; - int a_vbus_vld; - int b_bus_resume; - int b_bus_suspend; - int b_conn; - int b_se0_srp; - int b_sess_end; - int b_sess_vld; - int id; - - /* Internal variables */ - int a_set_b_hnp_en; - int b_srp_done; - int b_hnp_enable; - - /* Timeout indicator for timers */ - int a_wait_vrise_tmout; - int a_wait_bcon_tmout; - int a_aidl_bdis_tmout; - int b_ase0_brst_tmout; - - /* Informative variables */ - int a_bus_drop; - int a_bus_req; - int a_clr_err; - int a_suspend_req; - int b_bus_req; - - /* Output */ - int drv_vbus; - int loc_conn; - int loc_sof; - - struct otg_fsm_ops *ops; - struct usb_otg *otg; - - /* Current usb protocol used: 0:undefine; 1:host; 2:client */ - int protocol; - spinlock_t lock; -}; - -struct otg_fsm_ops { - void (*chrg_vbus)(int on); - void (*drv_vbus)(int on); - void (*loc_conn)(int on); - void (*loc_sof)(int on); - void (*start_pulse)(void); - void (*add_timer)(void *timer); - void (*del_timer)(void *timer); - int (*start_host)(struct otg_fsm *fsm, int on); - int (*start_gadget)(struct otg_fsm *fsm, int on); -}; - - -static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on) -{ - fsm->ops->chrg_vbus(on); -} - -static inline void otg_drv_vbus(struct otg_fsm *fsm, int on) -{ - if (fsm->drv_vbus != on) { - fsm->drv_vbus = on; - fsm->ops->drv_vbus(on); - } -} - -static inline void otg_loc_conn(struct otg_fsm *fsm, int on) -{ - if (fsm->loc_conn != on) { - fsm->loc_conn = on; - fsm->ops->loc_conn(on); - } -} - -static inline void otg_loc_sof(struct otg_fsm *fsm, int on) -{ - if (fsm->loc_sof != on) { - fsm->loc_sof = on; - fsm->ops->loc_sof(on); - } -} - -static inline void otg_start_pulse(struct otg_fsm *fsm) -{ - fsm->ops->start_pulse(); -} - -static inline void otg_add_timer(struct otg_fsm *fsm, void *timer) -{ - fsm->ops->add_timer(timer); -} - -static inline void otg_del_timer(struct otg_fsm *fsm, void *timer) -{ - fsm->ops->del_timer(timer); -} - -int otg_statemachine(struct otg_fsm *fsm); - -/* Defined by device specific driver, for different timer implementation */ -extern struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, - *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, - *a_wait_enum_tmr; diff --git a/drivers/usb/phy/phy-ab8500-usb.c b/drivers/usb/phy/phy-ab8500-usb.c new file mode 100644 index 0000000..2d86f26 --- /dev/null +++ b/drivers/usb/phy/phy-ab8500-usb.c @@ -0,0 +1,596 @@ +/* + * drivers/usb/otg/ab8500_usb.c + * + * USB transceiver driver for AB8500 chip + * + * Copyright (C) 2010 ST-Ericsson AB + * Mian Yousaf Kaukab + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define AB8500_MAIN_WD_CTRL_REG 0x01 +#define AB8500_USB_LINE_STAT_REG 0x80 +#define AB8500_USB_PHY_CTRL_REG 0x8A + +#define AB8500_BIT_OTG_STAT_ID (1 << 0) +#define AB8500_BIT_PHY_CTRL_HOST_EN (1 << 0) +#define AB8500_BIT_PHY_CTRL_DEVICE_EN (1 << 1) +#define AB8500_BIT_WD_CTRL_ENABLE (1 << 0) +#define AB8500_BIT_WD_CTRL_KICK (1 << 1) + +#define AB8500_V1x_LINK_STAT_WAIT (HZ/10) +#define AB8500_WD_KICK_DELAY_US 100 /* usec */ +#define AB8500_WD_V11_DISABLE_DELAY_US 100 /* usec */ +#define AB8500_WD_V10_DISABLE_DELAY_MS 100 /* ms */ + +/* Usb line status register */ +enum ab8500_usb_link_status { + USB_LINK_NOT_CONFIGURED = 0, + USB_LINK_STD_HOST_NC, + USB_LINK_STD_HOST_C_NS, + USB_LINK_STD_HOST_C_S, + USB_LINK_HOST_CHG_NM, + USB_LINK_HOST_CHG_HS, + USB_LINK_HOST_CHG_HS_CHIRP, + USB_LINK_DEDICATED_CHG, + USB_LINK_ACA_RID_A, + USB_LINK_ACA_RID_B, + USB_LINK_ACA_RID_C_NM, + USB_LINK_ACA_RID_C_HS, + USB_LINK_ACA_RID_C_HS_CHIRP, + USB_LINK_HM_IDGND, + USB_LINK_RESERVED, + USB_LINK_NOT_VALID_LINK +}; + +struct ab8500_usb { + struct usb_phy phy; + struct device *dev; + int irq_num_id_rise; + int irq_num_id_fall; + int irq_num_vbus_rise; + int irq_num_vbus_fall; + int irq_num_link_status; + unsigned vbus_draw; + struct delayed_work dwork; + struct work_struct phy_dis_work; + unsigned long link_status_wait; + int rev; +}; + +static inline struct ab8500_usb *phy_to_ab(struct usb_phy *x) +{ + return container_of(x, struct ab8500_usb, phy); +} + +static void ab8500_usb_wd_workaround(struct ab8500_usb *ab) +{ + abx500_set_register_interruptible(ab->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WD_CTRL_REG, + AB8500_BIT_WD_CTRL_ENABLE); + + udelay(AB8500_WD_KICK_DELAY_US); + + abx500_set_register_interruptible(ab->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WD_CTRL_REG, + (AB8500_BIT_WD_CTRL_ENABLE + | AB8500_BIT_WD_CTRL_KICK)); + + if (ab->rev > 0x10) /* v1.1 v2.0 */ + udelay(AB8500_WD_V11_DISABLE_DELAY_US); + else /* v1.0 */ + msleep(AB8500_WD_V10_DISABLE_DELAY_MS); + + abx500_set_register_interruptible(ab->dev, + AB8500_SYS_CTRL2_BLOCK, + AB8500_MAIN_WD_CTRL_REG, + 0); +} + +static void ab8500_usb_phy_ctrl(struct ab8500_usb *ab, bool sel_host, + bool enable) +{ + u8 ctrl_reg; + abx500_get_register_interruptible(ab->dev, + AB8500_USB, + AB8500_USB_PHY_CTRL_REG, + &ctrl_reg); + if (sel_host) { + if (enable) + ctrl_reg |= AB8500_BIT_PHY_CTRL_HOST_EN; + else + ctrl_reg &= ~AB8500_BIT_PHY_CTRL_HOST_EN; + } else { + if (enable) + ctrl_reg |= AB8500_BIT_PHY_CTRL_DEVICE_EN; + else + ctrl_reg &= ~AB8500_BIT_PHY_CTRL_DEVICE_EN; + } + + abx500_set_register_interruptible(ab->dev, + AB8500_USB, + AB8500_USB_PHY_CTRL_REG, + ctrl_reg); + + /* Needed to enable the phy.*/ + if (enable) + ab8500_usb_wd_workaround(ab); +} + +#define ab8500_usb_host_phy_en(ab) ab8500_usb_phy_ctrl(ab, true, true) +#define ab8500_usb_host_phy_dis(ab) ab8500_usb_phy_ctrl(ab, true, false) +#define ab8500_usb_peri_phy_en(ab) ab8500_usb_phy_ctrl(ab, false, true) +#define ab8500_usb_peri_phy_dis(ab) ab8500_usb_phy_ctrl(ab, false, false) + +static int ab8500_usb_link_status_update(struct ab8500_usb *ab) +{ + u8 reg; + enum ab8500_usb_link_status lsts; + void *v = NULL; + enum usb_phy_events event; + + abx500_get_register_interruptible(ab->dev, + AB8500_USB, + AB8500_USB_LINE_STAT_REG, + ®); + + lsts = (reg >> 3) & 0x0F; + + switch (lsts) { + case USB_LINK_NOT_CONFIGURED: + case USB_LINK_RESERVED: + case USB_LINK_NOT_VALID_LINK: + /* TODO: Disable regulators. */ + ab8500_usb_host_phy_dis(ab); + ab8500_usb_peri_phy_dis(ab); + ab->phy.state = OTG_STATE_B_IDLE; + ab->phy.otg->default_a = false; + ab->vbus_draw = 0; + event = USB_EVENT_NONE; + break; + + case USB_LINK_STD_HOST_NC: + case USB_LINK_STD_HOST_C_NS: + case USB_LINK_STD_HOST_C_S: + case USB_LINK_HOST_CHG_NM: + case USB_LINK_HOST_CHG_HS: + case USB_LINK_HOST_CHG_HS_CHIRP: + if (ab->phy.otg->gadget) { + /* TODO: Enable regulators. */ + ab8500_usb_peri_phy_en(ab); + v = ab->phy.otg->gadget; + } + event = USB_EVENT_VBUS; + break; + + case USB_LINK_HM_IDGND: + if (ab->phy.otg->host) { + /* TODO: Enable regulators. */ + ab8500_usb_host_phy_en(ab); + v = ab->phy.otg->host; + } + ab->phy.state = OTG_STATE_A_IDLE; + ab->phy.otg->default_a = true; + event = USB_EVENT_ID; + break; + + case USB_LINK_ACA_RID_A: + case USB_LINK_ACA_RID_B: + /* TODO */ + case USB_LINK_ACA_RID_C_NM: + case USB_LINK_ACA_RID_C_HS: + case USB_LINK_ACA_RID_C_HS_CHIRP: + case USB_LINK_DEDICATED_CHG: + /* TODO: vbus_draw */ + event = USB_EVENT_CHARGER; + break; + } + + atomic_notifier_call_chain(&ab->phy.notifier, event, v); + + return 0; +} + +static void ab8500_usb_delayed_work(struct work_struct *work) +{ + struct ab8500_usb *ab = container_of(work, struct ab8500_usb, + dwork.work); + + ab8500_usb_link_status_update(ab); +} + +static irqreturn_t ab8500_usb_v1x_common_irq(int irq, void *data) +{ + struct ab8500_usb *ab = (struct ab8500_usb *) data; + + /* Wait for link status to become stable. */ + schedule_delayed_work(&ab->dwork, ab->link_status_wait); + + return IRQ_HANDLED; +} + +static irqreturn_t ab8500_usb_v1x_vbus_fall_irq(int irq, void *data) +{ + struct ab8500_usb *ab = (struct ab8500_usb *) data; + + /* Link status will not be updated till phy is disabled. */ + ab8500_usb_peri_phy_dis(ab); + + /* Wait for link status to become stable. */ + schedule_delayed_work(&ab->dwork, ab->link_status_wait); + + return IRQ_HANDLED; +} + +static irqreturn_t ab8500_usb_v20_irq(int irq, void *data) +{ + struct ab8500_usb *ab = (struct ab8500_usb *) data; + + ab8500_usb_link_status_update(ab); + + return IRQ_HANDLED; +} + +static void ab8500_usb_phy_disable_work(struct work_struct *work) +{ + struct ab8500_usb *ab = container_of(work, struct ab8500_usb, + phy_dis_work); + + if (!ab->phy.otg->host) + ab8500_usb_host_phy_dis(ab); + + if (!ab->phy.otg->gadget) + ab8500_usb_peri_phy_dis(ab); +} + +static int ab8500_usb_set_power(struct usb_phy *phy, unsigned mA) +{ + struct ab8500_usb *ab; + + if (!phy) + return -ENODEV; + + ab = phy_to_ab(phy); + + ab->vbus_draw = mA; + + if (mA) + atomic_notifier_call_chain(&ab->phy.notifier, + USB_EVENT_ENUMERATED, ab->phy.otg->gadget); + return 0; +} + +/* TODO: Implement some way for charging or other drivers to read + * ab->vbus_draw. + */ + +static int ab8500_usb_set_suspend(struct usb_phy *x, int suspend) +{ + /* TODO */ + return 0; +} + +static int ab8500_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct ab8500_usb *ab; + + if (!otg) + return -ENODEV; + + ab = phy_to_ab(otg->phy); + + /* Some drivers call this function in atomic context. + * Do not update ab8500 registers directly till this + * is fixed. + */ + + if (!gadget) { + /* TODO: Disable regulators. */ + otg->gadget = NULL; + schedule_work(&ab->phy_dis_work); + } else { + otg->gadget = gadget; + otg->phy->state = OTG_STATE_B_IDLE; + + /* Phy will not be enabled if cable is already + * plugged-in. Schedule to enable phy. + * Use same delay to avoid any race condition. + */ + schedule_delayed_work(&ab->dwork, ab->link_status_wait); + } + + return 0; +} + +static int ab8500_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct ab8500_usb *ab; + + if (!otg) + return -ENODEV; + + ab = phy_to_ab(otg->phy); + + /* Some drivers call this function in atomic context. + * Do not update ab8500 registers directly till this + * is fixed. + */ + + if (!host) { + /* TODO: Disable regulators. */ + otg->host = NULL; + schedule_work(&ab->phy_dis_work); + } else { + otg->host = host; + /* Phy will not be enabled if cable is already + * plugged-in. Schedule to enable phy. + * Use same delay to avoid any race condition. + */ + schedule_delayed_work(&ab->dwork, ab->link_status_wait); + } + + return 0; +} + +static void ab8500_usb_irq_free(struct ab8500_usb *ab) +{ + if (ab->rev < 0x20) { + free_irq(ab->irq_num_id_rise, ab); + free_irq(ab->irq_num_id_fall, ab); + free_irq(ab->irq_num_vbus_rise, ab); + free_irq(ab->irq_num_vbus_fall, ab); + } else { + free_irq(ab->irq_num_link_status, ab); + } +} + +static int ab8500_usb_v1x_res_setup(struct platform_device *pdev, + struct ab8500_usb *ab) +{ + int err; + + ab->irq_num_id_rise = platform_get_irq_byname(pdev, "ID_WAKEUP_R"); + if (ab->irq_num_id_rise < 0) { + dev_err(&pdev->dev, "ID rise irq not found\n"); + return ab->irq_num_id_rise; + } + err = request_threaded_irq(ab->irq_num_id_rise, NULL, + ab8500_usb_v1x_common_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, + "usb-id-rise", ab); + if (err < 0) { + dev_err(ab->dev, "request_irq failed for ID rise irq\n"); + goto fail0; + } + + ab->irq_num_id_fall = platform_get_irq_byname(pdev, "ID_WAKEUP_F"); + if (ab->irq_num_id_fall < 0) { + dev_err(&pdev->dev, "ID fall irq not found\n"); + return ab->irq_num_id_fall; + } + err = request_threaded_irq(ab->irq_num_id_fall, NULL, + ab8500_usb_v1x_common_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, + "usb-id-fall", ab); + if (err < 0) { + dev_err(ab->dev, "request_irq failed for ID fall irq\n"); + goto fail1; + } + + ab->irq_num_vbus_rise = platform_get_irq_byname(pdev, "VBUS_DET_R"); + if (ab->irq_num_vbus_rise < 0) { + dev_err(&pdev->dev, "VBUS rise irq not found\n"); + return ab->irq_num_vbus_rise; + } + err = request_threaded_irq(ab->irq_num_vbus_rise, NULL, + ab8500_usb_v1x_common_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, + "usb-vbus-rise", ab); + if (err < 0) { + dev_err(ab->dev, "request_irq failed for Vbus rise irq\n"); + goto fail2; + } + + ab->irq_num_vbus_fall = platform_get_irq_byname(pdev, "VBUS_DET_F"); + if (ab->irq_num_vbus_fall < 0) { + dev_err(&pdev->dev, "VBUS fall irq not found\n"); + return ab->irq_num_vbus_fall; + } + err = request_threaded_irq(ab->irq_num_vbus_fall, NULL, + ab8500_usb_v1x_vbus_fall_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, + "usb-vbus-fall", ab); + if (err < 0) { + dev_err(ab->dev, "request_irq failed for Vbus fall irq\n"); + goto fail3; + } + + return 0; +fail3: + free_irq(ab->irq_num_vbus_rise, ab); +fail2: + free_irq(ab->irq_num_id_fall, ab); +fail1: + free_irq(ab->irq_num_id_rise, ab); +fail0: + return err; +} + +static int ab8500_usb_v2_res_setup(struct platform_device *pdev, + struct ab8500_usb *ab) +{ + int err; + + ab->irq_num_link_status = platform_get_irq_byname(pdev, + "USB_LINK_STATUS"); + if (ab->irq_num_link_status < 0) { + dev_err(&pdev->dev, "Link status irq not found\n"); + return ab->irq_num_link_status; + } + + err = request_threaded_irq(ab->irq_num_link_status, NULL, + ab8500_usb_v20_irq, + IRQF_NO_SUSPEND | IRQF_SHARED, + "usb-link-status", ab); + if (err < 0) { + dev_err(ab->dev, + "request_irq failed for link status irq\n"); + return err; + } + + return 0; +} + +static int ab8500_usb_probe(struct platform_device *pdev) +{ + struct ab8500_usb *ab; + struct usb_otg *otg; + int err; + int rev; + + rev = abx500_get_chip_id(&pdev->dev); + if (rev < 0) { + dev_err(&pdev->dev, "Chip id read failed\n"); + return rev; + } else if (rev < 0x10) { + dev_err(&pdev->dev, "Unsupported AB8500 chip\n"); + return -ENODEV; + } + + ab = kzalloc(sizeof *ab, GFP_KERNEL); + if (!ab) + return -ENOMEM; + + otg = kzalloc(sizeof *otg, GFP_KERNEL); + if (!otg) { + kfree(ab); + return -ENOMEM; + } + + ab->dev = &pdev->dev; + ab->rev = rev; + ab->phy.dev = ab->dev; + ab->phy.otg = otg; + ab->phy.label = "ab8500"; + ab->phy.set_suspend = ab8500_usb_set_suspend; + ab->phy.set_power = ab8500_usb_set_power; + ab->phy.state = OTG_STATE_UNDEFINED; + + otg->phy = &ab->phy; + otg->set_host = ab8500_usb_set_host; + otg->set_peripheral = ab8500_usb_set_peripheral; + + platform_set_drvdata(pdev, ab); + + ATOMIC_INIT_NOTIFIER_HEAD(&ab->phy.notifier); + + /* v1: Wait for link status to become stable. + * all: Updates form set_host and set_peripheral as they are atomic. + */ + INIT_DELAYED_WORK(&ab->dwork, ab8500_usb_delayed_work); + + /* all: Disable phy when called from set_host and set_peripheral */ + INIT_WORK(&ab->phy_dis_work, ab8500_usb_phy_disable_work); + + if (ab->rev < 0x20) { + err = ab8500_usb_v1x_res_setup(pdev, ab); + ab->link_status_wait = AB8500_V1x_LINK_STAT_WAIT; + } else { + err = ab8500_usb_v2_res_setup(pdev, ab); + } + + if (err < 0) + goto fail0; + + err = usb_add_phy(&ab->phy, USB_PHY_TYPE_USB2); + if (err) { + dev_err(&pdev->dev, "Can't register transceiver\n"); + goto fail1; + } + + dev_info(&pdev->dev, "AB8500 usb driver initialized\n"); + + return 0; +fail1: + ab8500_usb_irq_free(ab); +fail0: + kfree(otg); + kfree(ab); + return err; +} + +static int ab8500_usb_remove(struct platform_device *pdev) +{ + struct ab8500_usb *ab = platform_get_drvdata(pdev); + + ab8500_usb_irq_free(ab); + + cancel_delayed_work_sync(&ab->dwork); + + cancel_work_sync(&ab->phy_dis_work); + + usb_remove_phy(&ab->phy); + + ab8500_usb_host_phy_dis(ab); + ab8500_usb_peri_phy_dis(ab); + + platform_set_drvdata(pdev, NULL); + + kfree(ab->phy.otg); + kfree(ab); + + return 0; +} + +static struct platform_driver ab8500_usb_driver = { + .probe = ab8500_usb_probe, + .remove = ab8500_usb_remove, + .driver = { + .name = "ab8500-usb", + .owner = THIS_MODULE, + }, +}; + +static int __init ab8500_usb_init(void) +{ + return platform_driver_register(&ab8500_usb_driver); +} +subsys_initcall(ab8500_usb_init); + +static void __exit ab8500_usb_exit(void) +{ + platform_driver_unregister(&ab8500_usb_driver); +} +module_exit(ab8500_usb_exit); + +MODULE_ALIAS("platform:ab8500_usb"); +MODULE_AUTHOR("ST-Ericsson AB"); +MODULE_DESCRIPTION("AB8500 usb transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-fsl-usb.c b/drivers/usb/phy/phy-fsl-usb.c new file mode 100644 index 0000000..97b9308 --- /dev/null +++ b/drivers/usb/phy/phy-fsl-usb.c @@ -0,0 +1,1173 @@ +/* + * Copyright (C) 2007,2008 Freescale semiconductor, Inc. + * + * Author: Li Yang + * Jerry Huang + * + * Initialization based on code from Shlomi Gridish. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "phy-fsl-usb.h" + +#define DRIVER_VERSION "Rev. 1.55" +#define DRIVER_AUTHOR "Jerry Huang/Li Yang" +#define DRIVER_DESC "Freescale USB OTG Transceiver Driver" +#define DRIVER_INFO DRIVER_DESC " " DRIVER_VERSION + +static const char driver_name[] = "fsl-usb2-otg"; + +const pm_message_t otg_suspend_state = { + .event = 1, +}; + +#define HA_DATA_PULSE + +static struct usb_dr_mmap *usb_dr_regs; +static struct fsl_otg *fsl_otg_dev; +static int srp_wait_done; + +/* FSM timers */ +struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, *a_aidl_bdis_tmr, + *b_ase0_brst_tmr, *b_se0_srp_tmr; + +/* Driver specific timers */ +struct fsl_otg_timer *b_data_pulse_tmr, *b_vbus_pulse_tmr, *b_srp_fail_tmr, + *b_srp_wait_tmr, *a_wait_enum_tmr; + +static struct list_head active_timers; + +static struct fsl_otg_config fsl_otg_initdata = { + .otg_port = 1, +}; + +#ifdef CONFIG_PPC32 +static u32 _fsl_readl_be(const unsigned __iomem *p) +{ + return in_be32(p); +} + +static u32 _fsl_readl_le(const unsigned __iomem *p) +{ + return in_le32(p); +} + +static void _fsl_writel_be(u32 v, unsigned __iomem *p) +{ + out_be32(p, v); +} + +static void _fsl_writel_le(u32 v, unsigned __iomem *p) +{ + out_le32(p, v); +} + +static u32 (*_fsl_readl)(const unsigned __iomem *p); +static void (*_fsl_writel)(u32 v, unsigned __iomem *p); + +#define fsl_readl(p) (*_fsl_readl)((p)) +#define fsl_writel(v, p) (*_fsl_writel)((v), (p)) + +#else +#define fsl_readl(addr) readl(addr) +#define fsl_writel(val, addr) writel(val, addr) +#endif /* CONFIG_PPC32 */ + +/* Routines to access transceiver ULPI registers */ +u8 view_ulpi(u8 addr) +{ + u32 temp; + + temp = 0x40000000 | (addr << 16); + fsl_writel(temp, &usb_dr_regs->ulpiview); + udelay(1000); + while (temp & 0x40) + temp = fsl_readl(&usb_dr_regs->ulpiview); + return (le32_to_cpu(temp) & 0x0000ff00) >> 8; +} + +int write_ulpi(u8 addr, u8 data) +{ + u32 temp; + + temp = 0x60000000 | (addr << 16) | data; + fsl_writel(temp, &usb_dr_regs->ulpiview); + return 0; +} + +/* -------------------------------------------------------------*/ +/* Operations that will be called from OTG Finite State Machine */ + +/* Charge vbus for vbus pulsing in SRP */ +void fsl_otg_chrg_vbus(int on) +{ + u32 tmp; + + tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; + + if (on) + /* stop discharging, start charging */ + tmp = (tmp & ~OTGSC_CTRL_VBUS_DISCHARGE) | + OTGSC_CTRL_VBUS_CHARGE; + else + /* stop charging */ + tmp &= ~OTGSC_CTRL_VBUS_CHARGE; + + fsl_writel(tmp, &usb_dr_regs->otgsc); +} + +/* Discharge vbus through a resistor to ground */ +void fsl_otg_dischrg_vbus(int on) +{ + u32 tmp; + + tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; + + if (on) + /* stop charging, start discharging */ + tmp = (tmp & ~OTGSC_CTRL_VBUS_CHARGE) | + OTGSC_CTRL_VBUS_DISCHARGE; + else + /* stop discharging */ + tmp &= ~OTGSC_CTRL_VBUS_DISCHARGE; + + fsl_writel(tmp, &usb_dr_regs->otgsc); +} + +/* A-device driver vbus, controlled through PP bit in PORTSC */ +void fsl_otg_drv_vbus(int on) +{ + u32 tmp; + + if (on) { + tmp = fsl_readl(&usb_dr_regs->portsc) & ~PORTSC_W1C_BITS; + fsl_writel(tmp | PORTSC_PORT_POWER, &usb_dr_regs->portsc); + } else { + tmp = fsl_readl(&usb_dr_regs->portsc) & + ~PORTSC_W1C_BITS & ~PORTSC_PORT_POWER; + fsl_writel(tmp, &usb_dr_regs->portsc); + } +} + +/* + * Pull-up D+, signalling connect by periperal. Also used in + * data-line pulsing in SRP + */ +void fsl_otg_loc_conn(int on) +{ + u32 tmp; + + tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; + + if (on) + tmp |= OTGSC_CTRL_DATA_PULSING; + else + tmp &= ~OTGSC_CTRL_DATA_PULSING; + + fsl_writel(tmp, &usb_dr_regs->otgsc); +} + +/* + * Generate SOF by host. This is controlled through suspend/resume the + * port. In host mode, controller will automatically send SOF. + * Suspend will block the data on the port. + */ +void fsl_otg_loc_sof(int on) +{ + u32 tmp; + + tmp = fsl_readl(&fsl_otg_dev->dr_mem_map->portsc) & ~PORTSC_W1C_BITS; + if (on) + tmp |= PORTSC_PORT_FORCE_RESUME; + else + tmp |= PORTSC_PORT_SUSPEND; + + fsl_writel(tmp, &fsl_otg_dev->dr_mem_map->portsc); + +} + +/* Start SRP pulsing by data-line pulsing, followed with v-bus pulsing. */ +void fsl_otg_start_pulse(void) +{ + u32 tmp; + + srp_wait_done = 0; +#ifdef HA_DATA_PULSE + tmp = fsl_readl(&usb_dr_regs->otgsc) & ~OTGSC_INTSTS_MASK; + tmp |= OTGSC_HA_DATA_PULSE; + fsl_writel(tmp, &usb_dr_regs->otgsc); +#else + fsl_otg_loc_conn(1); +#endif + + fsl_otg_add_timer(b_data_pulse_tmr); +} + +void b_data_pulse_end(unsigned long foo) +{ +#ifdef HA_DATA_PULSE +#else + fsl_otg_loc_conn(0); +#endif + + /* Do VBUS pulse after data pulse */ + fsl_otg_pulse_vbus(); +} + +void fsl_otg_pulse_vbus(void) +{ + srp_wait_done = 0; + fsl_otg_chrg_vbus(1); + /* start the timer to end vbus charge */ + fsl_otg_add_timer(b_vbus_pulse_tmr); +} + +void b_vbus_pulse_end(unsigned long foo) +{ + fsl_otg_chrg_vbus(0); + + /* + * As USB3300 using the same a_sess_vld and b_sess_vld voltage + * we need to discharge the bus for a while to distinguish + * residual voltage of vbus pulsing and A device pull up + */ + fsl_otg_dischrg_vbus(1); + fsl_otg_add_timer(b_srp_wait_tmr); +} + +void b_srp_end(unsigned long foo) +{ + fsl_otg_dischrg_vbus(0); + srp_wait_done = 1; + + if ((fsl_otg_dev->phy.state == OTG_STATE_B_SRP_INIT) && + fsl_otg_dev->fsm.b_sess_vld) + fsl_otg_dev->fsm.b_srp_done = 1; +} + +/* + * Workaround for a_host suspending too fast. When a_bus_req=0, + * a_host will start by SRP. It needs to set b_hnp_enable before + * actually suspending to start HNP + */ +void a_wait_enum(unsigned long foo) +{ + VDBG("a_wait_enum timeout\n"); + if (!fsl_otg_dev->phy.otg->host->b_hnp_enable) + fsl_otg_add_timer(a_wait_enum_tmr); + else + otg_statemachine(&fsl_otg_dev->fsm); +} + +/* The timeout callback function to set time out bit */ +void set_tmout(unsigned long indicator) +{ + *(int *)indicator = 1; +} + +/* Initialize timers */ +int fsl_otg_init_timers(struct otg_fsm *fsm) +{ + /* FSM used timers */ + a_wait_vrise_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_VRISE, + (unsigned long)&fsm->a_wait_vrise_tmout); + if (!a_wait_vrise_tmr) + return -ENOMEM; + + a_wait_bcon_tmr = otg_timer_initializer(&set_tmout, TA_WAIT_BCON, + (unsigned long)&fsm->a_wait_bcon_tmout); + if (!a_wait_bcon_tmr) + return -ENOMEM; + + a_aidl_bdis_tmr = otg_timer_initializer(&set_tmout, TA_AIDL_BDIS, + (unsigned long)&fsm->a_aidl_bdis_tmout); + if (!a_aidl_bdis_tmr) + return -ENOMEM; + + b_ase0_brst_tmr = otg_timer_initializer(&set_tmout, TB_ASE0_BRST, + (unsigned long)&fsm->b_ase0_brst_tmout); + if (!b_ase0_brst_tmr) + return -ENOMEM; + + b_se0_srp_tmr = otg_timer_initializer(&set_tmout, TB_SE0_SRP, + (unsigned long)&fsm->b_se0_srp); + if (!b_se0_srp_tmr) + return -ENOMEM; + + b_srp_fail_tmr = otg_timer_initializer(&set_tmout, TB_SRP_FAIL, + (unsigned long)&fsm->b_srp_done); + if (!b_srp_fail_tmr) + return -ENOMEM; + + a_wait_enum_tmr = otg_timer_initializer(&a_wait_enum, 10, + (unsigned long)&fsm); + if (!a_wait_enum_tmr) + return -ENOMEM; + + /* device driver used timers */ + b_srp_wait_tmr = otg_timer_initializer(&b_srp_end, TB_SRP_WAIT, 0); + if (!b_srp_wait_tmr) + return -ENOMEM; + + b_data_pulse_tmr = otg_timer_initializer(&b_data_pulse_end, + TB_DATA_PLS, 0); + if (!b_data_pulse_tmr) + return -ENOMEM; + + b_vbus_pulse_tmr = otg_timer_initializer(&b_vbus_pulse_end, + TB_VBUS_PLS, 0); + if (!b_vbus_pulse_tmr) + return -ENOMEM; + + return 0; +} + +/* Uninitialize timers */ +void fsl_otg_uninit_timers(void) +{ + /* FSM used timers */ + kfree(a_wait_vrise_tmr); + kfree(a_wait_bcon_tmr); + kfree(a_aidl_bdis_tmr); + kfree(b_ase0_brst_tmr); + kfree(b_se0_srp_tmr); + kfree(b_srp_fail_tmr); + kfree(a_wait_enum_tmr); + + /* device driver used timers */ + kfree(b_srp_wait_tmr); + kfree(b_data_pulse_tmr); + kfree(b_vbus_pulse_tmr); +} + +/* Add timer to timer list */ +void fsl_otg_add_timer(void *gtimer) +{ + struct fsl_otg_timer *timer = gtimer; + struct fsl_otg_timer *tmp_timer; + + /* + * Check if the timer is already in the active list, + * if so update timer count + */ + list_for_each_entry(tmp_timer, &active_timers, list) + if (tmp_timer == timer) { + timer->count = timer->expires; + return; + } + timer->count = timer->expires; + list_add_tail(&timer->list, &active_timers); +} + +/* Remove timer from the timer list; clear timeout status */ +void fsl_otg_del_timer(void *gtimer) +{ + struct fsl_otg_timer *timer = gtimer; + struct fsl_otg_timer *tmp_timer, *del_tmp; + + list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) + if (tmp_timer == timer) + list_del(&timer->list); +} + +/* + * Reduce timer count by 1, and find timeout conditions. + * Called by fsl_otg 1ms timer interrupt + */ +int fsl_otg_tick_timer(void) +{ + struct fsl_otg_timer *tmp_timer, *del_tmp; + int expired = 0; + + list_for_each_entry_safe(tmp_timer, del_tmp, &active_timers, list) { + tmp_timer->count--; + /* check if timer expires */ + if (!tmp_timer->count) { + list_del(&tmp_timer->list); + tmp_timer->function(tmp_timer->data); + expired = 1; + } + } + + return expired; +} + +/* Reset controller, not reset the bus */ +void otg_reset_controller(void) +{ + u32 command; + + command = fsl_readl(&usb_dr_regs->usbcmd); + command |= (1 << 1); + fsl_writel(command, &usb_dr_regs->usbcmd); + while (fsl_readl(&usb_dr_regs->usbcmd) & (1 << 1)) + ; +} + +/* Call suspend/resume routines in host driver */ +int fsl_otg_start_host(struct otg_fsm *fsm, int on) +{ + struct usb_otg *otg = fsm->otg; + struct device *dev; + struct fsl_otg *otg_dev = container_of(otg->phy, struct fsl_otg, phy); + u32 retval = 0; + + if (!otg->host) + return -ENODEV; + dev = otg->host->controller; + + /* + * Update a_vbus_vld state as a_vbus_vld int is disabled + * in device mode + */ + fsm->a_vbus_vld = + !!(fsl_readl(&usb_dr_regs->otgsc) & OTGSC_STS_A_VBUS_VALID); + if (on) { + /* start fsl usb host controller */ + if (otg_dev->host_working) + goto end; + else { + otg_reset_controller(); + VDBG("host on......\n"); + if (dev->driver->pm && dev->driver->pm->resume) { + retval = dev->driver->pm->resume(dev); + if (fsm->id) { + /* default-b */ + fsl_otg_drv_vbus(1); + /* + * Workaround: b_host can't driver + * vbus, but PP in PORTSC needs to + * be 1 for host to work. + * So we set drv_vbus bit in + * transceiver to 0 thru ULPI. + */ + write_ulpi(0x0c, 0x20); + } + } + + otg_dev->host_working = 1; + } + } else { + /* stop fsl usb host controller */ + if (!otg_dev->host_working) + goto end; + else { + VDBG("host off......\n"); + if (dev && dev->driver) { + if (dev->driver->pm && dev->driver->pm->suspend) + retval = dev->driver->pm->suspend(dev); + if (fsm->id) + /* default-b */ + fsl_otg_drv_vbus(0); + } + otg_dev->host_working = 0; + } + } +end: + return retval; +} + +/* + * Call suspend and resume function in udc driver + * to stop and start udc driver. + */ +int fsl_otg_start_gadget(struct otg_fsm *fsm, int on) +{ + struct usb_otg *otg = fsm->otg; + struct device *dev; + + if (!otg->gadget || !otg->gadget->dev.parent) + return -ENODEV; + + VDBG("gadget %s\n", on ? "on" : "off"); + dev = otg->gadget->dev.parent; + + if (on) { + if (dev->driver->resume) + dev->driver->resume(dev); + } else { + if (dev->driver->suspend) + dev->driver->suspend(dev, otg_suspend_state); + } + + return 0; +} + +/* + * Called by initialization code of host driver. Register host controller + * to the OTG. Suspend host for OTG role detection. + */ +static int fsl_otg_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct fsl_otg *otg_dev; + + if (!otg) + return -ENODEV; + + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) + return -ENODEV; + + otg->host = host; + + otg_dev->fsm.a_bus_drop = 0; + otg_dev->fsm.a_bus_req = 1; + + if (host) { + VDBG("host off......\n"); + + otg->host->otg_port = fsl_otg_initdata.otg_port; + otg->host->is_b_host = otg_dev->fsm.id; + /* + * must leave time for khubd to finish its thing + * before yanking the host driver out from under it, + * so suspend the host after a short delay. + */ + otg_dev->host_working = 1; + schedule_delayed_work(&otg_dev->otg_event, 100); + return 0; + } else { + /* host driver going away */ + if (!(fsl_readl(&otg_dev->dr_mem_map->otgsc) & + OTGSC_STS_USB_ID)) { + /* Mini-A cable connected */ + struct otg_fsm *fsm = &otg_dev->fsm; + + otg->phy->state = OTG_STATE_UNDEFINED; + fsm->protocol = PROTO_UNDEF; + } + } + + otg_dev->host_working = 0; + + otg_statemachine(&otg_dev->fsm); + + return 0; +} + +/* Called by initialization code of udc. Register udc to OTG. */ +static int fsl_otg_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct fsl_otg *otg_dev; + + if (!otg) + return -ENODEV; + + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + VDBG("otg_dev 0x%x\n", (int)otg_dev); + VDBG("fsl_otg_dev 0x%x\n", (int)fsl_otg_dev); + if (otg_dev != fsl_otg_dev) + return -ENODEV; + + if (!gadget) { + if (!otg->default_a) + otg->gadget->ops->vbus_draw(otg->gadget, 0); + usb_gadget_vbus_disconnect(otg->gadget); + otg->gadget = 0; + otg_dev->fsm.b_bus_req = 0; + otg_statemachine(&otg_dev->fsm); + return 0; + } + + otg->gadget = gadget; + otg->gadget->is_a_peripheral = !otg_dev->fsm.id; + + otg_dev->fsm.b_bus_req = 1; + + /* start the gadget right away if the ID pin says Mini-B */ + DBG("ID pin=%d\n", otg_dev->fsm.id); + if (otg_dev->fsm.id == 1) { + fsl_otg_start_host(&otg_dev->fsm, 0); + otg_drv_vbus(&otg_dev->fsm, 0); + fsl_otg_start_gadget(&otg_dev->fsm, 1); + } + + return 0; +} + +/* Set OTG port power, only for B-device */ +static int fsl_otg_set_power(struct usb_phy *phy, unsigned mA) +{ + if (!fsl_otg_dev) + return -ENODEV; + if (phy->state == OTG_STATE_B_PERIPHERAL) + pr_info("FSL OTG: Draw %d mA\n", mA); + + return 0; +} + +/* + * Delayed pin detect interrupt processing. + * + * When the Mini-A cable is disconnected from the board, + * the pin-detect interrupt happens before the disconnect + * interrupts for the connected device(s). In order to + * process the disconnect interrupt(s) prior to switching + * roles, the pin-detect interrupts are delayed, and handled + * by this routine. + */ +static void fsl_otg_event(struct work_struct *work) +{ + struct fsl_otg *og = container_of(work, struct fsl_otg, otg_event.work); + struct otg_fsm *fsm = &og->fsm; + + if (fsm->id) { /* switch to gadget */ + fsl_otg_start_host(fsm, 0); + otg_drv_vbus(fsm, 0); + fsl_otg_start_gadget(fsm, 1); + } +} + +/* B-device start SRP */ +static int fsl_otg_start_srp(struct usb_otg *otg) +{ + struct fsl_otg *otg_dev; + + if (!otg || otg->phy->state != OTG_STATE_B_IDLE) + return -ENODEV; + + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) + return -ENODEV; + + otg_dev->fsm.b_bus_req = 1; + otg_statemachine(&otg_dev->fsm); + + return 0; +} + +/* A_host suspend will call this function to start hnp */ +static int fsl_otg_start_hnp(struct usb_otg *otg) +{ + struct fsl_otg *otg_dev; + + if (!otg) + return -ENODEV; + + otg_dev = container_of(otg->phy, struct fsl_otg, phy); + if (otg_dev != fsl_otg_dev) + return -ENODEV; + + DBG("start_hnp...n"); + + /* clear a_bus_req to enter a_suspend state */ + otg_dev->fsm.a_bus_req = 0; + otg_statemachine(&otg_dev->fsm); + + return 0; +} + +/* + * Interrupt handler. OTG/host/peripheral share the same int line. + * OTG driver clears OTGSC interrupts and leaves USB interrupts + * intact. It needs to have knowledge of some USB interrupts + * such as port change. + */ +irqreturn_t fsl_otg_isr(int irq, void *dev_id) +{ + struct otg_fsm *fsm = &((struct fsl_otg *)dev_id)->fsm; + struct usb_otg *otg = ((struct fsl_otg *)dev_id)->phy.otg; + u32 otg_int_src, otg_sc; + + otg_sc = fsl_readl(&usb_dr_regs->otgsc); + otg_int_src = otg_sc & OTGSC_INTSTS_MASK & (otg_sc >> 8); + + /* Only clear otg interrupts */ + fsl_writel(otg_sc, &usb_dr_regs->otgsc); + + /*FIXME: ID change not generate when init to 0 */ + fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; + otg->default_a = (fsm->id == 0); + + /* process OTG interrupts */ + if (otg_int_src) { + if (otg_int_src & OTGSC_INTSTS_USB_ID) { + fsm->id = (otg_sc & OTGSC_STS_USB_ID) ? 1 : 0; + otg->default_a = (fsm->id == 0); + /* clear conn information */ + if (fsm->id) + fsm->b_conn = 0; + else + fsm->a_conn = 0; + + if (otg->host) + otg->host->is_b_host = fsm->id; + if (otg->gadget) + otg->gadget->is_a_peripheral = !fsm->id; + VDBG("ID int (ID is %d)\n", fsm->id); + + if (fsm->id) { /* switch to gadget */ + schedule_delayed_work( + &((struct fsl_otg *)dev_id)->otg_event, + 100); + } else { /* switch to host */ + cancel_delayed_work(& + ((struct fsl_otg *)dev_id)-> + otg_event); + fsl_otg_start_gadget(fsm, 0); + otg_drv_vbus(fsm, 1); + fsl_otg_start_host(fsm, 1); + } + return IRQ_HANDLED; + } + } + return IRQ_NONE; +} + +static struct otg_fsm_ops fsl_otg_ops = { + .chrg_vbus = fsl_otg_chrg_vbus, + .drv_vbus = fsl_otg_drv_vbus, + .loc_conn = fsl_otg_loc_conn, + .loc_sof = fsl_otg_loc_sof, + .start_pulse = fsl_otg_start_pulse, + + .add_timer = fsl_otg_add_timer, + .del_timer = fsl_otg_del_timer, + + .start_host = fsl_otg_start_host, + .start_gadget = fsl_otg_start_gadget, +}; + +/* Initialize the global variable fsl_otg_dev and request IRQ for OTG */ +static int fsl_otg_conf(struct platform_device *pdev) +{ + struct fsl_otg *fsl_otg_tc; + int status; + + if (fsl_otg_dev) + return 0; + + /* allocate space to fsl otg device */ + fsl_otg_tc = kzalloc(sizeof(struct fsl_otg), GFP_KERNEL); + if (!fsl_otg_tc) + return -ENOMEM; + + fsl_otg_tc->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!fsl_otg_tc->phy.otg) { + kfree(fsl_otg_tc); + return -ENOMEM; + } + + INIT_DELAYED_WORK(&fsl_otg_tc->otg_event, fsl_otg_event); + + INIT_LIST_HEAD(&active_timers); + status = fsl_otg_init_timers(&fsl_otg_tc->fsm); + if (status) { + pr_info("Couldn't init OTG timers\n"); + goto err; + } + spin_lock_init(&fsl_otg_tc->fsm.lock); + + /* Set OTG state machine operations */ + fsl_otg_tc->fsm.ops = &fsl_otg_ops; + + /* initialize the otg structure */ + fsl_otg_tc->phy.label = DRIVER_DESC; + fsl_otg_tc->phy.set_power = fsl_otg_set_power; + + fsl_otg_tc->phy.otg->phy = &fsl_otg_tc->phy; + fsl_otg_tc->phy.otg->set_host = fsl_otg_set_host; + fsl_otg_tc->phy.otg->set_peripheral = fsl_otg_set_peripheral; + fsl_otg_tc->phy.otg->start_hnp = fsl_otg_start_hnp; + fsl_otg_tc->phy.otg->start_srp = fsl_otg_start_srp; + + fsl_otg_dev = fsl_otg_tc; + + /* Store the otg transceiver */ + status = usb_add_phy(&fsl_otg_tc->phy, USB_PHY_TYPE_USB2); + if (status) { + pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n"); + goto err; + } + + return 0; +err: + fsl_otg_uninit_timers(); + kfree(fsl_otg_tc->phy.otg); + kfree(fsl_otg_tc); + return status; +} + +/* OTG Initialization */ +int usb_otg_start(struct platform_device *pdev) +{ + struct fsl_otg *p_otg; + struct usb_phy *otg_trans = usb_get_phy(USB_PHY_TYPE_USB2); + struct otg_fsm *fsm; + int status; + struct resource *res; + u32 temp; + struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; + + p_otg = container_of(otg_trans, struct fsl_otg, phy); + fsm = &p_otg->fsm; + + /* Initialize the state machine structure with default values */ + SET_OTG_STATE(otg_trans, OTG_STATE_UNDEFINED); + fsm->otg = p_otg->phy.otg; + + /* We don't require predefined MEM/IRQ resource index */ + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENXIO; + + /* We don't request_mem_region here to enable resource sharing + * with host/device */ + + usb_dr_regs = ioremap(res->start, sizeof(struct usb_dr_mmap)); + p_otg->dr_mem_map = (struct usb_dr_mmap *)usb_dr_regs; + pdata->regs = (void *)usb_dr_regs; + + if (pdata->init && pdata->init(pdev) != 0) + return -EINVAL; + + if (pdata->big_endian_mmio) { + _fsl_readl = _fsl_readl_be; + _fsl_writel = _fsl_writel_be; + } else { + _fsl_readl = _fsl_readl_le; + _fsl_writel = _fsl_writel_le; + } + + /* request irq */ + p_otg->irq = platform_get_irq(pdev, 0); + status = request_irq(p_otg->irq, fsl_otg_isr, + IRQF_SHARED, driver_name, p_otg); + if (status) { + dev_dbg(p_otg->phy.dev, "can't get IRQ %d, error %d\n", + p_otg->irq, status); + iounmap(p_otg->dr_mem_map); + kfree(p_otg->phy.otg); + kfree(p_otg); + return status; + } + + /* stop the controller */ + temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); + temp &= ~USB_CMD_RUN_STOP; + fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); + + /* reset the controller */ + temp = fsl_readl(&p_otg->dr_mem_map->usbcmd); + temp |= USB_CMD_CTRL_RESET; + fsl_writel(temp, &p_otg->dr_mem_map->usbcmd); + + /* wait reset completed */ + while (fsl_readl(&p_otg->dr_mem_map->usbcmd) & USB_CMD_CTRL_RESET) + ; + + /* configure the VBUSHS as IDLE(both host and device) */ + temp = USB_MODE_STREAM_DISABLE | (pdata->es ? USB_MODE_ES : 0); + fsl_writel(temp, &p_otg->dr_mem_map->usbmode); + + /* configure PHY interface */ + temp = fsl_readl(&p_otg->dr_mem_map->portsc); + temp &= ~(PORTSC_PHY_TYPE_SEL | PORTSC_PTW); + switch (pdata->phy_mode) { + case FSL_USB2_PHY_ULPI: + temp |= PORTSC_PTS_ULPI; + break; + case FSL_USB2_PHY_UTMI_WIDE: + temp |= PORTSC_PTW_16BIT; + /* fall through */ + case FSL_USB2_PHY_UTMI: + temp |= PORTSC_PTS_UTMI; + /* fall through */ + default: + break; + } + fsl_writel(temp, &p_otg->dr_mem_map->portsc); + + if (pdata->have_sysif_regs) { + /* configure control enable IO output, big endian register */ + temp = __raw_readl(&p_otg->dr_mem_map->control); + temp |= USB_CTRL_IOENB; + __raw_writel(temp, &p_otg->dr_mem_map->control); + } + + /* disable all interrupt and clear all OTGSC status */ + temp = fsl_readl(&p_otg->dr_mem_map->otgsc); + temp &= ~OTGSC_INTERRUPT_ENABLE_BITS_MASK; + temp |= OTGSC_INTERRUPT_STATUS_BITS_MASK | OTGSC_CTRL_VBUS_DISCHARGE; + fsl_writel(temp, &p_otg->dr_mem_map->otgsc); + + /* + * The identification (id) input is FALSE when a Mini-A plug is inserted + * in the devices Mini-AB receptacle. Otherwise, this input is TRUE. + * Also: record initial state of ID pin + */ + if (fsl_readl(&p_otg->dr_mem_map->otgsc) & OTGSC_STS_USB_ID) { + p_otg->phy.state = OTG_STATE_UNDEFINED; + p_otg->fsm.id = 1; + } else { + p_otg->phy.state = OTG_STATE_A_IDLE; + p_otg->fsm.id = 0; + } + + DBG("initial ID pin=%d\n", p_otg->fsm.id); + + /* enable OTG ID pin interrupt */ + temp = fsl_readl(&p_otg->dr_mem_map->otgsc); + temp |= OTGSC_INTR_USB_ID_EN; + temp &= ~(OTGSC_CTRL_VBUS_DISCHARGE | OTGSC_INTR_1MS_TIMER_EN); + fsl_writel(temp, &p_otg->dr_mem_map->otgsc); + + return 0; +} + +/* + * state file in sysfs + */ +static int show_fsl_usb2_otg_state(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct otg_fsm *fsm = &fsl_otg_dev->fsm; + char *next = buf; + unsigned size = PAGE_SIZE; + unsigned long flags; + int t; + + spin_lock_irqsave(&fsm->lock, flags); + + /* basic driver infomation */ + t = scnprintf(next, size, + DRIVER_DESC "\n" "fsl_usb2_otg version: %s\n\n", + DRIVER_VERSION); + size -= t; + next += t; + + /* Registers */ + t = scnprintf(next, size, + "OTGSC: 0x%08x\n" + "PORTSC: 0x%08x\n" + "USBMODE: 0x%08x\n" + "USBCMD: 0x%08x\n" + "USBSTS: 0x%08x\n" + "USBINTR: 0x%08x\n", + fsl_readl(&usb_dr_regs->otgsc), + fsl_readl(&usb_dr_regs->portsc), + fsl_readl(&usb_dr_regs->usbmode), + fsl_readl(&usb_dr_regs->usbcmd), + fsl_readl(&usb_dr_regs->usbsts), + fsl_readl(&usb_dr_regs->usbintr)); + size -= t; + next += t; + + /* State */ + t = scnprintf(next, size, + "OTG state: %s\n\n", + usb_otg_state_string(fsl_otg_dev->phy.state)); + size -= t; + next += t; + + /* State Machine Variables */ + t = scnprintf(next, size, + "a_bus_req: %d\n" + "b_bus_req: %d\n" + "a_bus_resume: %d\n" + "a_bus_suspend: %d\n" + "a_conn: %d\n" + "a_sess_vld: %d\n" + "a_srp_det: %d\n" + "a_vbus_vld: %d\n" + "b_bus_resume: %d\n" + "b_bus_suspend: %d\n" + "b_conn: %d\n" + "b_se0_srp: %d\n" + "b_sess_end: %d\n" + "b_sess_vld: %d\n" + "id: %d\n", + fsm->a_bus_req, + fsm->b_bus_req, + fsm->a_bus_resume, + fsm->a_bus_suspend, + fsm->a_conn, + fsm->a_sess_vld, + fsm->a_srp_det, + fsm->a_vbus_vld, + fsm->b_bus_resume, + fsm->b_bus_suspend, + fsm->b_conn, + fsm->b_se0_srp, + fsm->b_sess_end, + fsm->b_sess_vld, + fsm->id); + size -= t; + next += t; + + spin_unlock_irqrestore(&fsm->lock, flags); + + return PAGE_SIZE - size; +} + +static DEVICE_ATTR(fsl_usb2_otg_state, S_IRUGO, show_fsl_usb2_otg_state, NULL); + + +/* Char driver interface to control some OTG input */ + +/* + * Handle some ioctl command, such as get otg + * status and set host suspend + */ +static long fsl_otg_ioctl(struct file *file, unsigned int cmd, + unsigned long arg) +{ + u32 retval = 0; + + switch (cmd) { + case GET_OTG_STATUS: + retval = fsl_otg_dev->host_working; + break; + + case SET_A_SUSPEND_REQ: + fsl_otg_dev->fsm.a_suspend_req = arg; + break; + + case SET_A_BUS_DROP: + fsl_otg_dev->fsm.a_bus_drop = arg; + break; + + case SET_A_BUS_REQ: + fsl_otg_dev->fsm.a_bus_req = arg; + break; + + case SET_B_BUS_REQ: + fsl_otg_dev->fsm.b_bus_req = arg; + break; + + default: + break; + } + + otg_statemachine(&fsl_otg_dev->fsm); + + return retval; +} + +static int fsl_otg_open(struct inode *inode, struct file *file) +{ + return 0; +} + +static int fsl_otg_release(struct inode *inode, struct file *file) +{ + return 0; +} + +static const struct file_operations otg_fops = { + .owner = THIS_MODULE, + .llseek = NULL, + .read = NULL, + .write = NULL, + .unlocked_ioctl = fsl_otg_ioctl, + .open = fsl_otg_open, + .release = fsl_otg_release, +}; + +static int fsl_otg_probe(struct platform_device *pdev) +{ + int ret; + + if (!pdev->dev.platform_data) + return -ENODEV; + + /* configure the OTG */ + ret = fsl_otg_conf(pdev); + if (ret) { + dev_err(&pdev->dev, "Couldn't configure OTG module\n"); + return ret; + } + + /* start OTG */ + ret = usb_otg_start(pdev); + if (ret) { + dev_err(&pdev->dev, "Can't init FSL OTG device\n"); + return ret; + } + + ret = register_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME, &otg_fops); + if (ret) { + dev_err(&pdev->dev, "unable to register FSL OTG device\n"); + return ret; + } + + ret = device_create_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); + if (ret) + dev_warn(&pdev->dev, "Can't register sysfs attribute\n"); + + return ret; +} + +static int fsl_otg_remove(struct platform_device *pdev) +{ + struct fsl_usb2_platform_data *pdata = pdev->dev.platform_data; + + usb_remove_phy(&fsl_otg_dev->phy); + free_irq(fsl_otg_dev->irq, fsl_otg_dev); + + iounmap((void *)usb_dr_regs); + + fsl_otg_uninit_timers(); + kfree(fsl_otg_dev->phy.otg); + kfree(fsl_otg_dev); + + device_remove_file(&pdev->dev, &dev_attr_fsl_usb2_otg_state); + + unregister_chrdev(FSL_OTG_MAJOR, FSL_OTG_NAME); + + if (pdata->exit) + pdata->exit(pdev); + + return 0; +} + +struct platform_driver fsl_otg_driver = { + .probe = fsl_otg_probe, + .remove = fsl_otg_remove, + .driver = { + .name = driver_name, + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(fsl_otg_driver); + +MODULE_DESCRIPTION(DRIVER_INFO); +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-fsl-usb.h b/drivers/usb/phy/phy-fsl-usb.h new file mode 100644 index 0000000..ca26628 --- /dev/null +++ b/drivers/usb/phy/phy-fsl-usb.h @@ -0,0 +1,406 @@ +/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include "otg_fsm.h" +#include +#include + +/* USB Command Register Bit Masks */ +#define USB_CMD_RUN_STOP (0x1<<0) +#define USB_CMD_CTRL_RESET (0x1<<1) +#define USB_CMD_PERIODIC_SCHEDULE_EN (0x1<<4) +#define USB_CMD_ASYNC_SCHEDULE_EN (0x1<<5) +#define USB_CMD_INT_AA_DOORBELL (0x1<<6) +#define USB_CMD_ASP (0x3<<8) +#define USB_CMD_ASYNC_SCH_PARK_EN (0x1<<11) +#define USB_CMD_SUTW (0x1<<13) +#define USB_CMD_ATDTW (0x1<<14) +#define USB_CMD_ITC (0xFF<<16) + +/* bit 15,3,2 are frame list size */ +#define USB_CMD_FRAME_SIZE_1024 (0x0<<15 | 0x0<<2) +#define USB_CMD_FRAME_SIZE_512 (0x0<<15 | 0x1<<2) +#define USB_CMD_FRAME_SIZE_256 (0x0<<15 | 0x2<<2) +#define USB_CMD_FRAME_SIZE_128 (0x0<<15 | 0x3<<2) +#define USB_CMD_FRAME_SIZE_64 (0x1<<15 | 0x0<<2) +#define USB_CMD_FRAME_SIZE_32 (0x1<<15 | 0x1<<2) +#define USB_CMD_FRAME_SIZE_16 (0x1<<15 | 0x2<<2) +#define USB_CMD_FRAME_SIZE_8 (0x1<<15 | 0x3<<2) + +/* bit 9-8 are async schedule park mode count */ +#define USB_CMD_ASP_00 (0x0<<8) +#define USB_CMD_ASP_01 (0x1<<8) +#define USB_CMD_ASP_10 (0x2<<8) +#define USB_CMD_ASP_11 (0x3<<8) +#define USB_CMD_ASP_BIT_POS (8) + +/* bit 23-16 are interrupt threshold control */ +#define USB_CMD_ITC_NO_THRESHOLD (0x00<<16) +#define USB_CMD_ITC_1_MICRO_FRM (0x01<<16) +#define USB_CMD_ITC_2_MICRO_FRM (0x02<<16) +#define USB_CMD_ITC_4_MICRO_FRM (0x04<<16) +#define USB_CMD_ITC_8_MICRO_FRM (0x08<<16) +#define USB_CMD_ITC_16_MICRO_FRM (0x10<<16) +#define USB_CMD_ITC_32_MICRO_FRM (0x20<<16) +#define USB_CMD_ITC_64_MICRO_FRM (0x40<<16) +#define USB_CMD_ITC_BIT_POS (16) + +/* USB Status Register Bit Masks */ +#define USB_STS_INT (0x1<<0) +#define USB_STS_ERR (0x1<<1) +#define USB_STS_PORT_CHANGE (0x1<<2) +#define USB_STS_FRM_LST_ROLL (0x1<<3) +#define USB_STS_SYS_ERR (0x1<<4) +#define USB_STS_IAA (0x1<<5) +#define USB_STS_RESET_RECEIVED (0x1<<6) +#define USB_STS_SOF (0x1<<7) +#define USB_STS_DCSUSPEND (0x1<<8) +#define USB_STS_HC_HALTED (0x1<<12) +#define USB_STS_RCL (0x1<<13) +#define USB_STS_PERIODIC_SCHEDULE (0x1<<14) +#define USB_STS_ASYNC_SCHEDULE (0x1<<15) + +/* USB Interrupt Enable Register Bit Masks */ +#define USB_INTR_INT_EN (0x1<<0) +#define USB_INTR_ERR_INT_EN (0x1<<1) +#define USB_INTR_PC_DETECT_EN (0x1<<2) +#define USB_INTR_FRM_LST_ROLL_EN (0x1<<3) +#define USB_INTR_SYS_ERR_EN (0x1<<4) +#define USB_INTR_ASYN_ADV_EN (0x1<<5) +#define USB_INTR_RESET_EN (0x1<<6) +#define USB_INTR_SOF_EN (0x1<<7) +#define USB_INTR_DEVICE_SUSPEND (0x1<<8) + +/* Device Address bit masks */ +#define USB_DEVICE_ADDRESS_MASK (0x7F<<25) +#define USB_DEVICE_ADDRESS_BIT_POS (25) +/* PORTSC Register Bit Masks,Only one PORT in OTG mode*/ +#define PORTSC_CURRENT_CONNECT_STATUS (0x1<<0) +#define PORTSC_CONNECT_STATUS_CHANGE (0x1<<1) +#define PORTSC_PORT_ENABLE (0x1<<2) +#define PORTSC_PORT_EN_DIS_CHANGE (0x1<<3) +#define PORTSC_OVER_CURRENT_ACT (0x1<<4) +#define PORTSC_OVER_CUURENT_CHG (0x1<<5) +#define PORTSC_PORT_FORCE_RESUME (0x1<<6) +#define PORTSC_PORT_SUSPEND (0x1<<7) +#define PORTSC_PORT_RESET (0x1<<8) +#define PORTSC_LINE_STATUS_BITS (0x3<<10) +#define PORTSC_PORT_POWER (0x1<<12) +#define PORTSC_PORT_INDICTOR_CTRL (0x3<<14) +#define PORTSC_PORT_TEST_CTRL (0xF<<16) +#define PORTSC_WAKE_ON_CONNECT_EN (0x1<<20) +#define PORTSC_WAKE_ON_CONNECT_DIS (0x1<<21) +#define PORTSC_WAKE_ON_OVER_CURRENT (0x1<<22) +#define PORTSC_PHY_LOW_POWER_SPD (0x1<<23) +#define PORTSC_PORT_FORCE_FULL_SPEED (0x1<<24) +#define PORTSC_PORT_SPEED_MASK (0x3<<26) +#define PORTSC_TRANSCEIVER_WIDTH (0x1<<28) +#define PORTSC_PHY_TYPE_SEL (0x3<<30) +/* bit 11-10 are line status */ +#define PORTSC_LINE_STATUS_SE0 (0x0<<10) +#define PORTSC_LINE_STATUS_JSTATE (0x1<<10) +#define PORTSC_LINE_STATUS_KSTATE (0x2<<10) +#define PORTSC_LINE_STATUS_UNDEF (0x3<<10) +#define PORTSC_LINE_STATUS_BIT_POS (10) + +/* bit 15-14 are port indicator control */ +#define PORTSC_PIC_OFF (0x0<<14) +#define PORTSC_PIC_AMBER (0x1<<14) +#define PORTSC_PIC_GREEN (0x2<<14) +#define PORTSC_PIC_UNDEF (0x3<<14) +#define PORTSC_PIC_BIT_POS (14) + +/* bit 19-16 are port test control */ +#define PORTSC_PTC_DISABLE (0x0<<16) +#define PORTSC_PTC_JSTATE (0x1<<16) +#define PORTSC_PTC_KSTATE (0x2<<16) +#define PORTSC_PTC_SEQNAK (0x3<<16) +#define PORTSC_PTC_PACKET (0x4<<16) +#define PORTSC_PTC_FORCE_EN (0x5<<16) +#define PORTSC_PTC_BIT_POS (16) + +/* bit 27-26 are port speed */ +#define PORTSC_PORT_SPEED_FULL (0x0<<26) +#define PORTSC_PORT_SPEED_LOW (0x1<<26) +#define PORTSC_PORT_SPEED_HIGH (0x2<<26) +#define PORTSC_PORT_SPEED_UNDEF (0x3<<26) +#define PORTSC_SPEED_BIT_POS (26) + +/* bit 28 is parallel transceiver width for UTMI interface */ +#define PORTSC_PTW (0x1<<28) +#define PORTSC_PTW_8BIT (0x0<<28) +#define PORTSC_PTW_16BIT (0x1<<28) + +/* bit 31-30 are port transceiver select */ +#define PORTSC_PTS_UTMI (0x0<<30) +#define PORTSC_PTS_ULPI (0x2<<30) +#define PORTSC_PTS_FSLS_SERIAL (0x3<<30) +#define PORTSC_PTS_BIT_POS (30) + +#define PORTSC_W1C_BITS \ + (PORTSC_CONNECT_STATUS_CHANGE | \ + PORTSC_PORT_EN_DIS_CHANGE | \ + PORTSC_OVER_CUURENT_CHG) + +/* OTG Status Control Register Bit Masks */ +#define OTGSC_CTRL_VBUS_DISCHARGE (0x1<<0) +#define OTGSC_CTRL_VBUS_CHARGE (0x1<<1) +#define OTGSC_CTRL_OTG_TERMINATION (0x1<<3) +#define OTGSC_CTRL_DATA_PULSING (0x1<<4) +#define OTGSC_CTRL_ID_PULL_EN (0x1<<5) +#define OTGSC_HA_DATA_PULSE (0x1<<6) +#define OTGSC_HA_BA (0x1<<7) +#define OTGSC_STS_USB_ID (0x1<<8) +#define OTGSC_STS_A_VBUS_VALID (0x1<<9) +#define OTGSC_STS_A_SESSION_VALID (0x1<<10) +#define OTGSC_STS_B_SESSION_VALID (0x1<<11) +#define OTGSC_STS_B_SESSION_END (0x1<<12) +#define OTGSC_STS_1MS_TOGGLE (0x1<<13) +#define OTGSC_STS_DATA_PULSING (0x1<<14) +#define OTGSC_INTSTS_USB_ID (0x1<<16) +#define OTGSC_INTSTS_A_VBUS_VALID (0x1<<17) +#define OTGSC_INTSTS_A_SESSION_VALID (0x1<<18) +#define OTGSC_INTSTS_B_SESSION_VALID (0x1<<19) +#define OTGSC_INTSTS_B_SESSION_END (0x1<<20) +#define OTGSC_INTSTS_1MS (0x1<<21) +#define OTGSC_INTSTS_DATA_PULSING (0x1<<22) +#define OTGSC_INTR_USB_ID_EN (0x1<<24) +#define OTGSC_INTR_A_VBUS_VALID_EN (0x1<<25) +#define OTGSC_INTR_A_SESSION_VALID_EN (0x1<<26) +#define OTGSC_INTR_B_SESSION_VALID_EN (0x1<<27) +#define OTGSC_INTR_B_SESSION_END_EN (0x1<<28) +#define OTGSC_INTR_1MS_TIMER_EN (0x1<<29) +#define OTGSC_INTR_DATA_PULSING_EN (0x1<<30) +#define OTGSC_INTSTS_MASK (0x00ff0000) + +/* USB MODE Register Bit Masks */ +#define USB_MODE_CTRL_MODE_IDLE (0x0<<0) +#define USB_MODE_CTRL_MODE_DEVICE (0x2<<0) +#define USB_MODE_CTRL_MODE_HOST (0x3<<0) +#define USB_MODE_CTRL_MODE_RSV (0x1<<0) +#define USB_MODE_SETUP_LOCK_OFF (0x1<<3) +#define USB_MODE_STREAM_DISABLE (0x1<<4) +#define USB_MODE_ES (0x1<<2) /* Endian Select */ + +/* control Register Bit Masks */ +#define USB_CTRL_IOENB (0x1<<2) +#define USB_CTRL_ULPI_INT0EN (0x1<<0) + +/* BCSR5 */ +#define BCSR5_INT_USB (0x02) + +/* USB module clk cfg */ +#define SCCR_OFFS (0xA08) +#define SCCR_USB_CLK_DISABLE (0x00000000) /* USB clk disable */ +#define SCCR_USB_MPHCM_11 (0x00c00000) +#define SCCR_USB_MPHCM_01 (0x00400000) +#define SCCR_USB_MPHCM_10 (0x00800000) +#define SCCR_USB_DRCM_11 (0x00300000) +#define SCCR_USB_DRCM_01 (0x00100000) +#define SCCR_USB_DRCM_10 (0x00200000) + +#define SICRL_OFFS (0x114) +#define SICRL_USB0 (0x40000000) +#define SICRL_USB1 (0x20000000) + +#define SICRH_OFFS (0x118) +#define SICRH_USB_UTMI (0x00020000) + +/* OTG interrupt enable bit masks */ +#define OTGSC_INTERRUPT_ENABLE_BITS_MASK \ + (OTGSC_INTR_USB_ID_EN | \ + OTGSC_INTR_1MS_TIMER_EN | \ + OTGSC_INTR_A_VBUS_VALID_EN | \ + OTGSC_INTR_A_SESSION_VALID_EN | \ + OTGSC_INTR_B_SESSION_VALID_EN | \ + OTGSC_INTR_B_SESSION_END_EN | \ + OTGSC_INTR_DATA_PULSING_EN) + +/* OTG interrupt status bit masks */ +#define OTGSC_INTERRUPT_STATUS_BITS_MASK \ + (OTGSC_INTSTS_USB_ID | \ + OTGSC_INTR_1MS_TIMER_EN | \ + OTGSC_INTSTS_A_VBUS_VALID | \ + OTGSC_INTSTS_A_SESSION_VALID | \ + OTGSC_INTSTS_B_SESSION_VALID | \ + OTGSC_INTSTS_B_SESSION_END | \ + OTGSC_INTSTS_DATA_PULSING) + +/* + * A-DEVICE timing constants + */ + +/* Wait for VBUS Rise */ +#define TA_WAIT_VRISE (100) /* a_wait_vrise 100 ms, section: 6.6.5.1 */ + +/* Wait for B-Connect */ +#define TA_WAIT_BCON (10000) /* a_wait_bcon > 1 sec, section: 6.6.5.2 + * This is only used to get out of + * OTG_STATE_A_WAIT_BCON state if there was + * no connection for these many milliseconds + */ + +/* A-Idle to B-Disconnect */ +/* It is necessary for this timer to be more than 750 ms because of a bug in OPT + * test 5.4 in which B OPT disconnects after 750 ms instead of 75ms as stated + * in the test description + */ +#define TA_AIDL_BDIS (5000) /* a_suspend minimum 200 ms, section: 6.6.5.3 */ + +/* B-Idle to A-Disconnect */ +#define TA_BIDL_ADIS (12) /* 3 to 200 ms */ + +/* B-device timing constants */ + + +/* Data-Line Pulse Time*/ +#define TB_DATA_PLS (10) /* b_srp_init,continue 5~10ms, section:5.3.3 */ +#define TB_DATA_PLS_MIN (5) /* minimum 5 ms */ +#define TB_DATA_PLS_MAX (10) /* maximum 10 ms */ + +/* SRP Initiate Time */ +#define TB_SRP_INIT (100) /* b_srp_init,maximum 100 ms, section:5.3.8 */ + +/* SRP Fail Time */ +#define TB_SRP_FAIL (7000) /* b_srp_init,Fail time 5~30s, section:6.8.2.2*/ + +/* SRP result wait time */ +#define TB_SRP_WAIT (60) + +/* VBus time */ +#define TB_VBUS_PLS (30) /* time to keep vbus pulsing asserted */ + +/* Discharge time */ +/* This time should be less than 10ms. It varies from system to system. */ +#define TB_VBUS_DSCHRG (8) + +/* A-SE0 to B-Reset */ +#define TB_ASE0_BRST (20) /* b_wait_acon, mini 3.125 ms,section:6.8.2.4 */ + +/* A bus suspend timer before we can switch to b_wait_aconn */ +#define TB_A_SUSPEND (7) +#define TB_BUS_RESUME (12) + +/* SE0 Time Before SRP */ +#define TB_SE0_SRP (2) /* b_idle,minimum 2 ms, section:5.3.2 */ + +#define SET_OTG_STATE(otg_ptr, newstate) ((otg_ptr)->state = newstate) + +struct usb_dr_mmap { + /* Capability register */ + u8 res1[256]; + u16 caplength; /* Capability Register Length */ + u16 hciversion; /* Host Controller Interface Version */ + u32 hcsparams; /* Host Controller Structual Parameters */ + u32 hccparams; /* Host Controller Capability Parameters */ + u8 res2[20]; + u32 dciversion; /* Device Controller Interface Version */ + u32 dccparams; /* Device Controller Capability Parameters */ + u8 res3[24]; + /* Operation register */ + u32 usbcmd; /* USB Command Register */ + u32 usbsts; /* USB Status Register */ + u32 usbintr; /* USB Interrupt Enable Register */ + u32 frindex; /* Frame Index Register */ + u8 res4[4]; + u32 deviceaddr; /* Device Address */ + u32 endpointlistaddr; /* Endpoint List Address Register */ + u8 res5[4]; + u32 burstsize; /* Master Interface Data Burst Size Register */ + u32 txttfilltuning; /* Transmit FIFO Tuning Controls Register */ + u8 res6[8]; + u32 ulpiview; /* ULPI register access */ + u8 res7[12]; + u32 configflag; /* Configure Flag Register */ + u32 portsc; /* Port 1 Status and Control Register */ + u8 res8[28]; + u32 otgsc; /* On-The-Go Status and Control */ + u32 usbmode; /* USB Mode Register */ + u32 endptsetupstat; /* Endpoint Setup Status Register */ + u32 endpointprime; /* Endpoint Initialization Register */ + u32 endptflush; /* Endpoint Flush Register */ + u32 endptstatus; /* Endpoint Status Register */ + u32 endptcomplete; /* Endpoint Complete Register */ + u32 endptctrl[6]; /* Endpoint Control Registers */ + u8 res9[552]; + u32 snoop1; + u32 snoop2; + u32 age_cnt_thresh; /* Age Count Threshold Register */ + u32 pri_ctrl; /* Priority Control Register */ + u32 si_ctrl; /* System Interface Control Register */ + u8 res10[236]; + u32 control; /* General Purpose Control Register */ +}; + +struct fsl_otg_timer { + unsigned long expires; /* Number of count increase to timeout */ + unsigned long count; /* Tick counter */ + void (*function)(unsigned long); /* Timeout function */ + unsigned long data; /* Data passed to function */ + struct list_head list; +}; + +inline struct fsl_otg_timer *otg_timer_initializer +(void (*function)(unsigned long), unsigned long expires, unsigned long data) +{ + struct fsl_otg_timer *timer; + + timer = kmalloc(sizeof(struct fsl_otg_timer), GFP_KERNEL); + if (!timer) + return NULL; + timer->function = function; + timer->expires = expires; + timer->data = data; + return timer; +} + +struct fsl_otg { + struct usb_phy phy; + struct otg_fsm fsm; + struct usb_dr_mmap *dr_mem_map; + struct delayed_work otg_event; + + /* used for usb host */ + struct work_struct work_wq; + u8 host_working; + + int irq; +}; + +struct fsl_otg_config { + u8 otg_port; +}; + +/* For SRP and HNP handle */ +#define FSL_OTG_MAJOR 240 +#define FSL_OTG_NAME "fsl-usb2-otg" +/* Command to OTG driver ioctl */ +#define OTG_IOCTL_MAGIC FSL_OTG_MAJOR +/* if otg work as host, it should return 1, otherwise return 0 */ +#define GET_OTG_STATUS _IOR(OTG_IOCTL_MAGIC, 1, int) +#define SET_A_SUSPEND_REQ _IOW(OTG_IOCTL_MAGIC, 2, int) +#define SET_A_BUS_DROP _IOW(OTG_IOCTL_MAGIC, 3, int) +#define SET_A_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 4, int) +#define SET_B_BUS_REQ _IOW(OTG_IOCTL_MAGIC, 5, int) +#define GET_A_SUSPEND_REQ _IOR(OTG_IOCTL_MAGIC, 6, int) +#define GET_A_BUS_DROP _IOR(OTG_IOCTL_MAGIC, 7, int) +#define GET_A_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 8, int) +#define GET_B_BUS_REQ _IOR(OTG_IOCTL_MAGIC, 9, int) + +void fsl_otg_add_timer(void *timer); +void fsl_otg_del_timer(void *timer); +void fsl_otg_pulse_vbus(void); diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c new file mode 100644 index 0000000..c520b35 --- /dev/null +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -0,0 +1,348 @@ +/* + * OTG Finite State Machine from OTG spec + * + * Copyright (C) 2007,2008 Freescale Semiconductor, Inc. + * + * Author: Li Yang + * Jerry Huang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "phy-otg-fsm.h" + +/* Change USB protocol when there is a protocol change */ +static int otg_set_protocol(struct otg_fsm *fsm, int protocol) +{ + int ret = 0; + + if (fsm->protocol != protocol) { + VDBG("Changing role fsm->protocol= %d; new protocol= %d\n", + fsm->protocol, protocol); + /* stop old protocol */ + if (fsm->protocol == PROTO_HOST) + ret = fsm->ops->start_host(fsm, 0); + else if (fsm->protocol == PROTO_GADGET) + ret = fsm->ops->start_gadget(fsm, 0); + if (ret) + return ret; + + /* start new protocol */ + if (protocol == PROTO_HOST) + ret = fsm->ops->start_host(fsm, 1); + else if (protocol == PROTO_GADGET) + ret = fsm->ops->start_gadget(fsm, 1); + if (ret) + return ret; + + fsm->protocol = protocol; + return 0; + } + + return 0; +} + +static int state_changed; + +/* Called when leaving a state. Do state clean up jobs here */ +void otg_leave_state(struct otg_fsm *fsm, enum usb_otg_state old_state) +{ + switch (old_state) { + case OTG_STATE_B_IDLE: + otg_del_timer(fsm, b_se0_srp_tmr); + fsm->b_se0_srp = 0; + break; + case OTG_STATE_B_SRP_INIT: + fsm->b_srp_done = 0; + break; + case OTG_STATE_B_PERIPHERAL: + break; + case OTG_STATE_B_WAIT_ACON: + otg_del_timer(fsm, b_ase0_brst_tmr); + fsm->b_ase0_brst_tmout = 0; + break; + case OTG_STATE_B_HOST: + break; + case OTG_STATE_A_IDLE: + break; + case OTG_STATE_A_WAIT_VRISE: + otg_del_timer(fsm, a_wait_vrise_tmr); + fsm->a_wait_vrise_tmout = 0; + break; + case OTG_STATE_A_WAIT_BCON: + otg_del_timer(fsm, a_wait_bcon_tmr); + fsm->a_wait_bcon_tmout = 0; + break; + case OTG_STATE_A_HOST: + otg_del_timer(fsm, a_wait_enum_tmr); + break; + case OTG_STATE_A_SUSPEND: + otg_del_timer(fsm, a_aidl_bdis_tmr); + fsm->a_aidl_bdis_tmout = 0; + fsm->a_suspend_req = 0; + break; + case OTG_STATE_A_PERIPHERAL: + break; + case OTG_STATE_A_WAIT_VFALL: + otg_del_timer(fsm, a_wait_vrise_tmr); + break; + case OTG_STATE_A_VBUS_ERR: + break; + default: + break; + } +} + +/* Called when entering a state */ +int otg_set_state(struct otg_fsm *fsm, enum usb_otg_state new_state) +{ + state_changed = 1; + if (fsm->otg->phy->state == new_state) + return 0; + VDBG("Set state: %s\n", usb_otg_state_string(new_state)); + otg_leave_state(fsm, fsm->otg->phy->state); + switch (new_state) { + case OTG_STATE_B_IDLE: + otg_drv_vbus(fsm, 0); + otg_chrg_vbus(fsm, 0); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_UNDEF); + otg_add_timer(fsm, b_se0_srp_tmr); + break; + case OTG_STATE_B_SRP_INIT: + otg_start_pulse(fsm); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_UNDEF); + otg_add_timer(fsm, b_srp_fail_tmr); + break; + case OTG_STATE_B_PERIPHERAL: + otg_chrg_vbus(fsm, 0); + otg_loc_conn(fsm, 1); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_GADGET); + break; + case OTG_STATE_B_WAIT_ACON: + otg_chrg_vbus(fsm, 0); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_HOST); + otg_add_timer(fsm, b_ase0_brst_tmr); + fsm->a_bus_suspend = 0; + break; + case OTG_STATE_B_HOST: + otg_chrg_vbus(fsm, 0); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 1); + otg_set_protocol(fsm, PROTO_HOST); + usb_bus_start_enum(fsm->otg->host, + fsm->otg->host->otg_port); + break; + case OTG_STATE_A_IDLE: + otg_drv_vbus(fsm, 0); + otg_chrg_vbus(fsm, 0); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_HOST); + break; + case OTG_STATE_A_WAIT_VRISE: + otg_drv_vbus(fsm, 1); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_HOST); + otg_add_timer(fsm, a_wait_vrise_tmr); + break; + case OTG_STATE_A_WAIT_BCON: + otg_drv_vbus(fsm, 1); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_HOST); + otg_add_timer(fsm, a_wait_bcon_tmr); + break; + case OTG_STATE_A_HOST: + otg_drv_vbus(fsm, 1); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 1); + otg_set_protocol(fsm, PROTO_HOST); + /* + * When HNP is triggered while a_bus_req = 0, a_host will + * suspend too fast to complete a_set_b_hnp_en + */ + if (!fsm->a_bus_req || fsm->a_suspend_req) + otg_add_timer(fsm, a_wait_enum_tmr); + break; + case OTG_STATE_A_SUSPEND: + otg_drv_vbus(fsm, 1); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_HOST); + otg_add_timer(fsm, a_aidl_bdis_tmr); + + break; + case OTG_STATE_A_PERIPHERAL: + otg_loc_conn(fsm, 1); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_GADGET); + otg_drv_vbus(fsm, 1); + break; + case OTG_STATE_A_WAIT_VFALL: + otg_drv_vbus(fsm, 0); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_HOST); + break; + case OTG_STATE_A_VBUS_ERR: + otg_drv_vbus(fsm, 0); + otg_loc_conn(fsm, 0); + otg_loc_sof(fsm, 0); + otg_set_protocol(fsm, PROTO_UNDEF); + break; + default: + break; + } + + fsm->otg->phy->state = new_state; + return 0; +} + +/* State change judgement */ +int otg_statemachine(struct otg_fsm *fsm) +{ + enum usb_otg_state state; + unsigned long flags; + + spin_lock_irqsave(&fsm->lock, flags); + + state = fsm->otg->phy->state; + state_changed = 0; + /* State machine state change judgement */ + + switch (state) { + case OTG_STATE_UNDEFINED: + VDBG("fsm->id = %d\n", fsm->id); + if (fsm->id) + otg_set_state(fsm, OTG_STATE_B_IDLE); + else + otg_set_state(fsm, OTG_STATE_A_IDLE); + break; + case OTG_STATE_B_IDLE: + if (!fsm->id) + otg_set_state(fsm, OTG_STATE_A_IDLE); + else if (fsm->b_sess_vld && fsm->otg->gadget) + otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); + else if (fsm->b_bus_req && fsm->b_sess_end && fsm->b_se0_srp) + otg_set_state(fsm, OTG_STATE_B_SRP_INIT); + break; + case OTG_STATE_B_SRP_INIT: + if (!fsm->id || fsm->b_srp_done) + otg_set_state(fsm, OTG_STATE_B_IDLE); + break; + case OTG_STATE_B_PERIPHERAL: + if (!fsm->id || !fsm->b_sess_vld) + otg_set_state(fsm, OTG_STATE_B_IDLE); + else if (fsm->b_bus_req && fsm->otg-> + gadget->b_hnp_enable && fsm->a_bus_suspend) + otg_set_state(fsm, OTG_STATE_B_WAIT_ACON); + break; + case OTG_STATE_B_WAIT_ACON: + if (fsm->a_conn) + otg_set_state(fsm, OTG_STATE_B_HOST); + else if (!fsm->id || !fsm->b_sess_vld) + otg_set_state(fsm, OTG_STATE_B_IDLE); + else if (fsm->a_bus_resume || fsm->b_ase0_brst_tmout) { + fsm->b_ase0_brst_tmout = 0; + otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); + } + break; + case OTG_STATE_B_HOST: + if (!fsm->id || !fsm->b_sess_vld) + otg_set_state(fsm, OTG_STATE_B_IDLE); + else if (!fsm->b_bus_req || !fsm->a_conn) + otg_set_state(fsm, OTG_STATE_B_PERIPHERAL); + break; + case OTG_STATE_A_IDLE: + if (fsm->id) + otg_set_state(fsm, OTG_STATE_B_IDLE); + else if (!fsm->a_bus_drop && (fsm->a_bus_req || fsm->a_srp_det)) + otg_set_state(fsm, OTG_STATE_A_WAIT_VRISE); + break; + case OTG_STATE_A_WAIT_VRISE: + if (fsm->id || fsm->a_bus_drop || fsm->a_vbus_vld || + fsm->a_wait_vrise_tmout) { + otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); + } + break; + case OTG_STATE_A_WAIT_BCON: + if (!fsm->a_vbus_vld) + otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); + else if (fsm->b_conn) + otg_set_state(fsm, OTG_STATE_A_HOST); + else if (fsm->id | fsm->a_bus_drop | fsm->a_wait_bcon_tmout) + otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); + break; + case OTG_STATE_A_HOST: + if ((!fsm->a_bus_req || fsm->a_suspend_req) && + fsm->otg->host->b_hnp_enable) + otg_set_state(fsm, OTG_STATE_A_SUSPEND); + else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop) + otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); + else if (!fsm->a_vbus_vld) + otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); + break; + case OTG_STATE_A_SUSPEND: + if (!fsm->b_conn && fsm->otg->host->b_hnp_enable) + otg_set_state(fsm, OTG_STATE_A_PERIPHERAL); + else if (!fsm->b_conn && !fsm->otg->host->b_hnp_enable) + otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); + else if (fsm->a_bus_req || fsm->b_bus_resume) + otg_set_state(fsm, OTG_STATE_A_HOST); + else if (fsm->id || fsm->a_bus_drop || fsm->a_aidl_bdis_tmout) + otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); + else if (!fsm->a_vbus_vld) + otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); + break; + case OTG_STATE_A_PERIPHERAL: + if (fsm->id || fsm->a_bus_drop) + otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); + else if (fsm->b_bus_suspend) + otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); + else if (!fsm->a_vbus_vld) + otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); + break; + case OTG_STATE_A_WAIT_VFALL: + if (fsm->id || fsm->a_bus_req || (!fsm->a_sess_vld && + !fsm->b_conn)) + otg_set_state(fsm, OTG_STATE_A_IDLE); + break; + case OTG_STATE_A_VBUS_ERR: + if (fsm->id || fsm->a_bus_drop || fsm->a_clr_err) + otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); + break; + default: + break; + } + spin_unlock_irqrestore(&fsm->lock, flags); + + VDBG("quit statemachine, changed = %d\n", state_changed); + return state_changed; +} diff --git a/drivers/usb/phy/phy-fsm-usb.h b/drivers/usb/phy/phy-fsm-usb.h new file mode 100644 index 0000000..c30a2e1 --- /dev/null +++ b/drivers/usb/phy/phy-fsm-usb.h @@ -0,0 +1,154 @@ +/* Copyright (C) 2007,2008 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#undef DEBUG +#undef VERBOSE + +#ifdef DEBUG +#define DBG(fmt, args...) printk(KERN_DEBUG "[%s] " fmt , \ + __func__, ## args) +#else +#define DBG(fmt, args...) do {} while (0) +#endif + +#ifdef VERBOSE +#define VDBG DBG +#else +#define VDBG(stuff...) do {} while (0) +#endif + +#ifdef VERBOSE +#define MPC_LOC printk("Current Location [%s]:[%d]\n", __FILE__, __LINE__) +#else +#define MPC_LOC do {} while (0) +#endif + +#define PROTO_UNDEF (0) +#define PROTO_HOST (1) +#define PROTO_GADGET (2) + +/* OTG state machine according to the OTG spec */ +struct otg_fsm { + /* Input */ + int a_bus_resume; + int a_bus_suspend; + int a_conn; + int a_sess_vld; + int a_srp_det; + int a_vbus_vld; + int b_bus_resume; + int b_bus_suspend; + int b_conn; + int b_se0_srp; + int b_sess_end; + int b_sess_vld; + int id; + + /* Internal variables */ + int a_set_b_hnp_en; + int b_srp_done; + int b_hnp_enable; + + /* Timeout indicator for timers */ + int a_wait_vrise_tmout; + int a_wait_bcon_tmout; + int a_aidl_bdis_tmout; + int b_ase0_brst_tmout; + + /* Informative variables */ + int a_bus_drop; + int a_bus_req; + int a_clr_err; + int a_suspend_req; + int b_bus_req; + + /* Output */ + int drv_vbus; + int loc_conn; + int loc_sof; + + struct otg_fsm_ops *ops; + struct usb_otg *otg; + + /* Current usb protocol used: 0:undefine; 1:host; 2:client */ + int protocol; + spinlock_t lock; +}; + +struct otg_fsm_ops { + void (*chrg_vbus)(int on); + void (*drv_vbus)(int on); + void (*loc_conn)(int on); + void (*loc_sof)(int on); + void (*start_pulse)(void); + void (*add_timer)(void *timer); + void (*del_timer)(void *timer); + int (*start_host)(struct otg_fsm *fsm, int on); + int (*start_gadget)(struct otg_fsm *fsm, int on); +}; + + +static inline void otg_chrg_vbus(struct otg_fsm *fsm, int on) +{ + fsm->ops->chrg_vbus(on); +} + +static inline void otg_drv_vbus(struct otg_fsm *fsm, int on) +{ + if (fsm->drv_vbus != on) { + fsm->drv_vbus = on; + fsm->ops->drv_vbus(on); + } +} + +static inline void otg_loc_conn(struct otg_fsm *fsm, int on) +{ + if (fsm->loc_conn != on) { + fsm->loc_conn = on; + fsm->ops->loc_conn(on); + } +} + +static inline void otg_loc_sof(struct otg_fsm *fsm, int on) +{ + if (fsm->loc_sof != on) { + fsm->loc_sof = on; + fsm->ops->loc_sof(on); + } +} + +static inline void otg_start_pulse(struct otg_fsm *fsm) +{ + fsm->ops->start_pulse(); +} + +static inline void otg_add_timer(struct otg_fsm *fsm, void *timer) +{ + fsm->ops->add_timer(timer); +} + +static inline void otg_del_timer(struct otg_fsm *fsm, void *timer) +{ + fsm->ops->del_timer(timer); +} + +int otg_statemachine(struct otg_fsm *fsm); + +/* Defined by device specific driver, for different timer implementation */ +extern struct fsl_otg_timer *a_wait_vrise_tmr, *a_wait_bcon_tmr, + *a_aidl_bdis_tmr, *b_ase0_brst_tmr, *b_se0_srp_tmr, *b_srp_fail_tmr, + *a_wait_enum_tmr; diff --git a/drivers/usb/phy/phy-gpio-vbus-usb.c b/drivers/usb/phy/phy-gpio-vbus-usb.c new file mode 100644 index 0000000..a7d4ac5 --- /dev/null +++ b/drivers/usb/phy/phy-gpio-vbus-usb.c @@ -0,0 +1,416 @@ +/* + * gpio-vbus.c - simple GPIO VBUS sensing driver for B peripheral devices + * + * Copyright (c) 2008 Philipp Zabel + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include +#include +#include + + +/* + * A simple GPIO VBUS sensing driver for B peripheral only devices + * with internal transceivers. It can control a D+ pullup GPIO and + * a regulator to limit the current drawn from VBUS. + * + * Needs to be loaded before the UDC driver that will use it. + */ +struct gpio_vbus_data { + struct usb_phy phy; + struct device *dev; + struct regulator *vbus_draw; + int vbus_draw_enabled; + unsigned mA; + struct delayed_work work; + int vbus; + int irq; +}; + + +/* + * This driver relies on "both edges" triggering. VBUS has 100 msec to + * stabilize, so the peripheral controller driver may need to cope with + * some bouncing due to current surges (e.g. charging local capacitance) + * and contact chatter. + * + * REVISIT in desperate straits, toggling between rising and falling + * edges might be workable. + */ +#define VBUS_IRQ_FLAGS \ + (IRQF_SHARED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING) + + +/* interface to regulator framework */ +static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) +{ + struct regulator *vbus_draw = gpio_vbus->vbus_draw; + int enabled; + + if (!vbus_draw) + return; + + enabled = gpio_vbus->vbus_draw_enabled; + if (mA) { + regulator_set_current_limit(vbus_draw, 0, 1000 * mA); + if (!enabled) { + regulator_enable(vbus_draw); + gpio_vbus->vbus_draw_enabled = 1; + } + } else { + if (enabled) { + regulator_disable(vbus_draw); + gpio_vbus->vbus_draw_enabled = 0; + } + } + gpio_vbus->mA = mA; +} + +static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) +{ + int vbus; + + vbus = gpio_get_value(pdata->gpio_vbus); + if (pdata->gpio_vbus_inverted) + vbus = !vbus; + + return vbus; +} + +static void gpio_vbus_work(struct work_struct *work) +{ + struct gpio_vbus_data *gpio_vbus = + container_of(work, struct gpio_vbus_data, work.work); + struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; + int gpio, status, vbus; + + if (!gpio_vbus->phy.otg->gadget) + return; + + vbus = is_vbus_powered(pdata); + if ((vbus ^ gpio_vbus->vbus) == 0) + return; + gpio_vbus->vbus = vbus; + + /* Peripheral controllers which manage the pullup themselves won't have + * gpio_pullup configured here. If it's configured here, we'll do what + * isp1301_omap::b_peripheral() does and enable the pullup here... although + * that may complicate usb_gadget_{,dis}connect() support. + */ + gpio = pdata->gpio_pullup; + + if (vbus) { + status = USB_EVENT_VBUS; + gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.last_event = status; + usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); + + /* drawing a "unit load" is *always* OK, except for OTG */ + set_vbus_draw(gpio_vbus, 100); + + /* optionally enable D+ pullup */ + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); + } else { + /* optionally disable D+ pullup */ + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, pdata->gpio_pullup_inverted); + + set_vbus_draw(gpio_vbus, 0); + + usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); + status = USB_EVENT_NONE; + gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.last_event = status; + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); + } +} + +/* VBUS change IRQ handler */ +static irqreturn_t gpio_vbus_irq(int irq, void *data) +{ + struct platform_device *pdev = data; + struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; + struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); + struct usb_otg *otg = gpio_vbus->phy.otg; + + dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", + is_vbus_powered(pdata) ? "supplied" : "inactive", + otg->gadget ? otg->gadget->name : "none"); + + if (otg->gadget) + schedule_delayed_work(&gpio_vbus->work, msecs_to_jiffies(100)); + + return IRQ_HANDLED; +} + +/* OTG transceiver interface */ + +/* bind/unbind the peripheral controller */ +static int gpio_vbus_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct gpio_vbus_data *gpio_vbus; + struct gpio_vbus_mach_info *pdata; + struct platform_device *pdev; + int gpio; + + gpio_vbus = container_of(otg->phy, struct gpio_vbus_data, phy); + pdev = to_platform_device(gpio_vbus->dev); + pdata = gpio_vbus->dev->platform_data; + gpio = pdata->gpio_pullup; + + if (!gadget) { + dev_dbg(&pdev->dev, "unregistering gadget '%s'\n", + otg->gadget->name); + + /* optionally disable D+ pullup */ + if (gpio_is_valid(gpio)) + gpio_set_value(gpio, pdata->gpio_pullup_inverted); + + set_vbus_draw(gpio_vbus, 0); + + usb_gadget_vbus_disconnect(otg->gadget); + otg->phy->state = OTG_STATE_UNDEFINED; + + otg->gadget = NULL; + return 0; + } + + otg->gadget = gadget; + dev_dbg(&pdev->dev, "registered gadget '%s'\n", gadget->name); + + /* initialize connection state */ + gpio_vbus->vbus = 0; /* start with disconnected */ + gpio_vbus_irq(gpio_vbus->irq, pdev); + return 0; +} + +/* effective for B devices, ignored for A-peripheral */ +static int gpio_vbus_set_power(struct usb_phy *phy, unsigned mA) +{ + struct gpio_vbus_data *gpio_vbus; + + gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); + + if (phy->state == OTG_STATE_B_PERIPHERAL) + set_vbus_draw(gpio_vbus, mA); + return 0; +} + +/* for non-OTG B devices: set/clear transceiver suspend mode */ +static int gpio_vbus_set_suspend(struct usb_phy *phy, int suspend) +{ + struct gpio_vbus_data *gpio_vbus; + + gpio_vbus = container_of(phy, struct gpio_vbus_data, phy); + + /* draw max 0 mA from vbus in suspend mode; or the previously + * recorded amount of current if not suspended + * + * NOTE: high powered configs (mA > 100) may draw up to 2.5 mA + * if they're wake-enabled ... we don't handle that yet. + */ + return gpio_vbus_set_power(phy, suspend ? 0 : gpio_vbus->mA); +} + +/* platform driver interface */ + +static int __init gpio_vbus_probe(struct platform_device *pdev) +{ + struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; + struct gpio_vbus_data *gpio_vbus; + struct resource *res; + int err, gpio, irq; + unsigned long irqflags; + + if (!pdata || !gpio_is_valid(pdata->gpio_vbus)) + return -EINVAL; + gpio = pdata->gpio_vbus; + + gpio_vbus = kzalloc(sizeof(struct gpio_vbus_data), GFP_KERNEL); + if (!gpio_vbus) + return -ENOMEM; + + gpio_vbus->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!gpio_vbus->phy.otg) { + kfree(gpio_vbus); + return -ENOMEM; + } + + platform_set_drvdata(pdev, gpio_vbus); + gpio_vbus->dev = &pdev->dev; + gpio_vbus->phy.label = "gpio-vbus"; + gpio_vbus->phy.set_power = gpio_vbus_set_power; + gpio_vbus->phy.set_suspend = gpio_vbus_set_suspend; + gpio_vbus->phy.state = OTG_STATE_UNDEFINED; + + gpio_vbus->phy.otg->phy = &gpio_vbus->phy; + gpio_vbus->phy.otg->set_peripheral = gpio_vbus_set_peripheral; + + err = gpio_request(gpio, "vbus_detect"); + if (err) { + dev_err(&pdev->dev, "can't request vbus gpio %d, err: %d\n", + gpio, err); + goto err_gpio; + } + gpio_direction_input(gpio); + + res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (res) { + irq = res->start; + irqflags = (res->flags & IRQF_TRIGGER_MASK) | IRQF_SHARED; + } else { + irq = gpio_to_irq(gpio); + irqflags = VBUS_IRQ_FLAGS; + } + + gpio_vbus->irq = irq; + + /* if data line pullup is in use, initialize it to "not pulling up" */ + gpio = pdata->gpio_pullup; + if (gpio_is_valid(gpio)) { + err = gpio_request(gpio, "udc_pullup"); + if (err) { + dev_err(&pdev->dev, + "can't request pullup gpio %d, err: %d\n", + gpio, err); + gpio_free(pdata->gpio_vbus); + goto err_gpio; + } + gpio_direction_output(gpio, pdata->gpio_pullup_inverted); + } + + err = request_irq(irq, gpio_vbus_irq, irqflags, "vbus_detect", pdev); + if (err) { + dev_err(&pdev->dev, "can't request irq %i, err: %d\n", + irq, err); + goto err_irq; + } + + ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); + + INIT_DELAYED_WORK(&gpio_vbus->work, gpio_vbus_work); + + gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); + if (IS_ERR(gpio_vbus->vbus_draw)) { + dev_dbg(&pdev->dev, "can't get vbus_draw regulator, err: %ld\n", + PTR_ERR(gpio_vbus->vbus_draw)); + gpio_vbus->vbus_draw = NULL; + } + + /* only active when a gadget is registered */ + err = usb_add_phy(&gpio_vbus->phy, USB_PHY_TYPE_USB2); + if (err) { + dev_err(&pdev->dev, "can't register transceiver, err: %d\n", + err); + goto err_otg; + } + + device_init_wakeup(&pdev->dev, pdata->wakeup); + + return 0; +err_otg: + regulator_put(gpio_vbus->vbus_draw); + free_irq(irq, pdev); +err_irq: + if (gpio_is_valid(pdata->gpio_pullup)) + gpio_free(pdata->gpio_pullup); + gpio_free(pdata->gpio_vbus); +err_gpio: + platform_set_drvdata(pdev, NULL); + kfree(gpio_vbus->phy.otg); + kfree(gpio_vbus); + return err; +} + +static int __exit gpio_vbus_remove(struct platform_device *pdev) +{ + struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); + struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; + int gpio = pdata->gpio_vbus; + + device_init_wakeup(&pdev->dev, 0); + cancel_delayed_work_sync(&gpio_vbus->work); + regulator_put(gpio_vbus->vbus_draw); + + usb_remove_phy(&gpio_vbus->phy); + + free_irq(gpio_vbus->irq, pdev); + if (gpio_is_valid(pdata->gpio_pullup)) + gpio_free(pdata->gpio_pullup); + gpio_free(gpio); + platform_set_drvdata(pdev, NULL); + kfree(gpio_vbus->phy.otg); + kfree(gpio_vbus); + + return 0; +} + +#ifdef CONFIG_PM +static int gpio_vbus_pm_suspend(struct device *dev) +{ + struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + enable_irq_wake(gpio_vbus->irq); + + return 0; +} + +static int gpio_vbus_pm_resume(struct device *dev) +{ + struct gpio_vbus_data *gpio_vbus = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + disable_irq_wake(gpio_vbus->irq); + + return 0; +} + +static const struct dev_pm_ops gpio_vbus_dev_pm_ops = { + .suspend = gpio_vbus_pm_suspend, + .resume = gpio_vbus_pm_resume, +}; +#endif + +/* NOTE: the gpio-vbus device may *NOT* be hotplugged */ + +MODULE_ALIAS("platform:gpio-vbus"); + +static struct platform_driver gpio_vbus_driver = { + .driver = { + .name = "gpio-vbus", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &gpio_vbus_dev_pm_ops, +#endif + }, + .remove = __exit_p(gpio_vbus_remove), +}; + +module_platform_driver_probe(gpio_vbus_driver, gpio_vbus_probe); + +MODULE_DESCRIPTION("simple GPIO controlled OTG transceiver driver"); +MODULE_AUTHOR("Philipp Zabel"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-isp1301-omap.c b/drivers/usb/phy/phy-isp1301-omap.c new file mode 100644 index 0000000..8fe0c3b --- /dev/null +++ b/drivers/usb/phy/phy-isp1301-omap.c @@ -0,0 +1,1656 @@ +/* + * isp1301_omap - ISP 1301 USB transceiver, talking to OMAP OTG controller + * + * Copyright (C) 2004 Texas Instruments + * Copyright (C) 2004 David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#include + +#include + +#ifndef DEBUG +#undef VERBOSE +#endif + + +#define DRIVER_VERSION "24 August 2004" +#define DRIVER_NAME (isp1301_driver.driver.name) + +MODULE_DESCRIPTION("ISP1301 USB OTG Transceiver Driver"); +MODULE_LICENSE("GPL"); + +struct isp1301 { + struct usb_phy phy; + struct i2c_client *client; + void (*i2c_release)(struct device *dev); + + int irq_type; + + u32 last_otg_ctrl; + unsigned working:1; + + struct timer_list timer; + + /* use keventd context to change the state for us */ + struct work_struct work; + + unsigned long todo; +# define WORK_UPDATE_ISP 0 /* update ISP from OTG */ +# define WORK_UPDATE_OTG 1 /* update OTG from ISP */ +# define WORK_HOST_RESUME 4 /* resume host */ +# define WORK_TIMER 6 /* timer fired */ +# define WORK_STOP 7 /* don't resubmit */ +}; + + +/* bits in OTG_CTRL */ + +#define OTG_XCEIV_OUTPUTS \ + (OTG_ASESSVLD|OTG_BSESSEND|OTG_BSESSVLD|OTG_VBUSVLD|OTG_ID) +#define OTG_XCEIV_INPUTS \ + (OTG_PULLDOWN|OTG_PULLUP|OTG_DRV_VBUS|OTG_PD_VBUS|OTG_PU_VBUS|OTG_PU_ID) +#define OTG_CTRL_BITS \ + (OTG_A_BUSREQ|OTG_A_SETB_HNPEN|OTG_B_BUSREQ|OTG_B_HNPEN|OTG_BUSDROP) + /* and OTG_PULLUP is sometimes written */ + +#define OTG_CTRL_MASK (OTG_DRIVER_SEL| \ + OTG_XCEIV_OUTPUTS|OTG_XCEIV_INPUTS| \ + OTG_CTRL_BITS) + + +/*-------------------------------------------------------------------------*/ + +/* board-specific PM hooks */ + +#if defined(CONFIG_MACH_OMAP_H2) || defined(CONFIG_MACH_OMAP_H3) + +#if defined(CONFIG_TPS65010) || defined(CONFIG_TPS65010_MODULE) + +#include + +#else + +static inline int tps65010_set_vbus_draw(unsigned mA) +{ + pr_debug("tps65010: draw %d mA (STUB)\n", mA); + return 0; +} + +#endif + +static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) +{ + int status = tps65010_set_vbus_draw(mA); + if (status < 0) + pr_debug(" VBUS %d mA error %d\n", mA, status); +} + +#else + +static void enable_vbus_draw(struct isp1301 *isp, unsigned mA) +{ + /* H4 controls this by DIP switch S2.4; no soft control. + * ON means the charger is always enabled. Leave it OFF + * unless the OTG port is used only in B-peripheral mode. + */ +} + +#endif + +static void enable_vbus_source(struct isp1301 *isp) +{ + /* this board won't supply more than 8mA vbus power. + * some boards can switch a 100ma "unit load" (or more). + */ +} + + +/* products will deliver OTG messages with LEDs, GUI, etc */ +static inline void notresponding(struct isp1301 *isp) +{ + printk(KERN_NOTICE "OTG device not responding.\n"); +} + + +/*-------------------------------------------------------------------------*/ + +static struct i2c_driver isp1301_driver; + +/* smbus apis are used for portability */ + +static inline u8 +isp1301_get_u8(struct isp1301 *isp, u8 reg) +{ + return i2c_smbus_read_byte_data(isp->client, reg + 0); +} + +static inline int +isp1301_get_u16(struct isp1301 *isp, u8 reg) +{ + return i2c_smbus_read_word_data(isp->client, reg); +} + +static inline int +isp1301_set_bits(struct isp1301 *isp, u8 reg, u8 bits) +{ + return i2c_smbus_write_byte_data(isp->client, reg + 0, bits); +} + +static inline int +isp1301_clear_bits(struct isp1301 *isp, u8 reg, u8 bits) +{ + return i2c_smbus_write_byte_data(isp->client, reg + 1, bits); +} + +/*-------------------------------------------------------------------------*/ + +/* identification */ +#define ISP1301_VENDOR_ID 0x00 /* u16 read */ +#define ISP1301_PRODUCT_ID 0x02 /* u16 read */ +#define ISP1301_BCD_DEVICE 0x14 /* u16 read */ + +#define I2C_VENDOR_ID_PHILIPS 0x04cc +#define I2C_PRODUCT_ID_PHILIPS_1301 0x1301 + +/* operational registers */ +#define ISP1301_MODE_CONTROL_1 0x04 /* u8 read, set, +1 clear */ +# define MC1_SPEED (1 << 0) +# define MC1_SUSPEND (1 << 1) +# define MC1_DAT_SE0 (1 << 2) +# define MC1_TRANSPARENT (1 << 3) +# define MC1_BDIS_ACON_EN (1 << 4) +# define MC1_OE_INT_EN (1 << 5) +# define MC1_UART_EN (1 << 6) +# define MC1_MASK 0x7f +#define ISP1301_MODE_CONTROL_2 0x12 /* u8 read, set, +1 clear */ +# define MC2_GLOBAL_PWR_DN (1 << 0) +# define MC2_SPD_SUSP_CTRL (1 << 1) +# define MC2_BI_DI (1 << 2) +# define MC2_TRANSP_BDIR0 (1 << 3) +# define MC2_TRANSP_BDIR1 (1 << 4) +# define MC2_AUDIO_EN (1 << 5) +# define MC2_PSW_EN (1 << 6) +# define MC2_EN2V7 (1 << 7) +#define ISP1301_OTG_CONTROL_1 0x06 /* u8 read, set, +1 clear */ +# define OTG1_DP_PULLUP (1 << 0) +# define OTG1_DM_PULLUP (1 << 1) +# define OTG1_DP_PULLDOWN (1 << 2) +# define OTG1_DM_PULLDOWN (1 << 3) +# define OTG1_ID_PULLDOWN (1 << 4) +# define OTG1_VBUS_DRV (1 << 5) +# define OTG1_VBUS_DISCHRG (1 << 6) +# define OTG1_VBUS_CHRG (1 << 7) +#define ISP1301_OTG_STATUS 0x10 /* u8 readonly */ +# define OTG_B_SESS_END (1 << 6) +# define OTG_B_SESS_VLD (1 << 7) + +#define ISP1301_INTERRUPT_SOURCE 0x08 /* u8 read */ +#define ISP1301_INTERRUPT_LATCH 0x0A /* u8 read, set, +1 clear */ + +#define ISP1301_INTERRUPT_FALLING 0x0C /* u8 read, set, +1 clear */ +#define ISP1301_INTERRUPT_RISING 0x0E /* u8 read, set, +1 clear */ + +/* same bitfields in all interrupt registers */ +# define INTR_VBUS_VLD (1 << 0) +# define INTR_SESS_VLD (1 << 1) +# define INTR_DP_HI (1 << 2) +# define INTR_ID_GND (1 << 3) +# define INTR_DM_HI (1 << 4) +# define INTR_ID_FLOAT (1 << 5) +# define INTR_BDIS_ACON (1 << 6) +# define INTR_CR_INT (1 << 7) + +/*-------------------------------------------------------------------------*/ + +static inline const char *state_name(struct isp1301 *isp) +{ + return usb_otg_state_string(isp->phy.state); +} + +/*-------------------------------------------------------------------------*/ + +/* NOTE: some of this ISP1301 setup is specific to H2 boards; + * not everything is guarded by board-specific checks, or even using + * omap_usb_config data to deduce MC1_DAT_SE0 and MC2_BI_DI. + * + * ALSO: this currently doesn't use ISP1301 low-power modes + * while OTG is running. + */ + +static void power_down(struct isp1301 *isp) +{ + isp->phy.state = OTG_STATE_UNDEFINED; + + // isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND); + + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_ID_PULLDOWN); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); +} + +static void power_up(struct isp1301 *isp) +{ + // isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, MC2_GLOBAL_PWR_DN); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_SUSPEND); + + /* do this only when cpu is driving transceiver, + * so host won't see a low speed device... + */ + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); +} + +#define NO_HOST_SUSPEND + +static int host_suspend(struct isp1301 *isp) +{ +#ifdef NO_HOST_SUSPEND + return 0; +#else + struct device *dev; + + if (!isp->phy.otg->host) + return -ENODEV; + + /* Currently ASSUMES only the OTG port matters; + * other ports could be active... + */ + dev = isp->phy.otg->host->controller; + return dev->driver->suspend(dev, 3, 0); +#endif +} + +static int host_resume(struct isp1301 *isp) +{ +#ifdef NO_HOST_SUSPEND + return 0; +#else + struct device *dev; + + if (!isp->phy.otg->host) + return -ENODEV; + + dev = isp->phy.otg->host->controller; + return dev->driver->resume(dev, 0); +#endif +} + +static int gadget_suspend(struct isp1301 *isp) +{ + isp->phy.otg->gadget->b_hnp_enable = 0; + isp->phy.otg->gadget->a_hnp_support = 0; + isp->phy.otg->gadget->a_alt_hnp_support = 0; + return usb_gadget_vbus_disconnect(isp->phy.otg->gadget); +} + +/*-------------------------------------------------------------------------*/ + +#define TIMER_MINUTES 10 +#define TIMER_JIFFIES (TIMER_MINUTES * 60 * HZ) + +/* Almost all our I2C messaging comes from a work queue's task context. + * NOTE: guaranteeing certain response times might mean we shouldn't + * share keventd's work queue; a realtime task might be safest. + */ +static void isp1301_defer_work(struct isp1301 *isp, int work) +{ + int status; + + if (isp && !test_and_set_bit(work, &isp->todo)) { + (void) get_device(&isp->client->dev); + status = schedule_work(&isp->work); + if (!status && !isp->working) + dev_vdbg(&isp->client->dev, + "work item %d may be lost\n", work); + } +} + +/* called from irq handlers */ +static void a_idle(struct isp1301 *isp, const char *tag) +{ + u32 l; + + if (isp->phy.state == OTG_STATE_A_IDLE) + return; + + isp->phy.otg->default_a = 1; + if (isp->phy.otg->host) { + isp->phy.otg->host->is_b_host = 0; + host_suspend(isp); + } + if (isp->phy.otg->gadget) { + isp->phy.otg->gadget->is_a_peripheral = 1; + gadget_suspend(isp); + } + isp->phy.state = OTG_STATE_A_IDLE; + l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; + omap_writel(l, OTG_CTRL); + isp->last_otg_ctrl = l; + pr_debug(" --> %s/%s\n", state_name(isp), tag); +} + +/* called from irq handlers */ +static void b_idle(struct isp1301 *isp, const char *tag) +{ + u32 l; + + if (isp->phy.state == OTG_STATE_B_IDLE) + return; + + isp->phy.otg->default_a = 0; + if (isp->phy.otg->host) { + isp->phy.otg->host->is_b_host = 1; + host_suspend(isp); + } + if (isp->phy.otg->gadget) { + isp->phy.otg->gadget->is_a_peripheral = 0; + gadget_suspend(isp); + } + isp->phy.state = OTG_STATE_B_IDLE; + l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; + omap_writel(l, OTG_CTRL); + isp->last_otg_ctrl = l; + pr_debug(" --> %s/%s\n", state_name(isp), tag); +} + +static void +dump_regs(struct isp1301 *isp, const char *label) +{ +#ifdef DEBUG + u8 ctrl = isp1301_get_u8(isp, ISP1301_OTG_CONTROL_1); + u8 status = isp1301_get_u8(isp, ISP1301_OTG_STATUS); + u8 src = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); + + pr_debug("otg: %06x, %s %s, otg/%02x stat/%02x.%02x\n", + omap_readl(OTG_CTRL), label, state_name(isp), + ctrl, status, src); + /* mode control and irq enables don't change much */ +#endif +} + +/*-------------------------------------------------------------------------*/ + +#ifdef CONFIG_USB_OTG + +/* + * The OMAP OTG controller handles most of the OTG state transitions. + * + * We translate isp1301 outputs (mostly voltage comparator status) into + * OTG inputs; OTG outputs (mostly pullup/pulldown controls) and HNP state + * flags into isp1301 inputs ... and infer state transitions. + */ + +#ifdef VERBOSE + +static void check_state(struct isp1301 *isp, const char *tag) +{ + enum usb_otg_state state = OTG_STATE_UNDEFINED; + u8 fsm = omap_readw(OTG_TEST) & 0x0ff; + unsigned extra = 0; + + switch (fsm) { + + /* default-b */ + case 0x0: + state = OTG_STATE_B_IDLE; + break; + case 0x3: + case 0x7: + extra = 1; + case 0x1: + state = OTG_STATE_B_PERIPHERAL; + break; + case 0x11: + state = OTG_STATE_B_SRP_INIT; + break; + + /* extra dual-role default-b states */ + case 0x12: + case 0x13: + case 0x16: + extra = 1; + case 0x17: + state = OTG_STATE_B_WAIT_ACON; + break; + case 0x34: + state = OTG_STATE_B_HOST; + break; + + /* default-a */ + case 0x36: + state = OTG_STATE_A_IDLE; + break; + case 0x3c: + state = OTG_STATE_A_WAIT_VFALL; + break; + case 0x7d: + state = OTG_STATE_A_VBUS_ERR; + break; + case 0x9e: + case 0x9f: + extra = 1; + case 0x89: + state = OTG_STATE_A_PERIPHERAL; + break; + case 0xb7: + state = OTG_STATE_A_WAIT_VRISE; + break; + case 0xb8: + state = OTG_STATE_A_WAIT_BCON; + break; + case 0xb9: + state = OTG_STATE_A_HOST; + break; + case 0xba: + state = OTG_STATE_A_SUSPEND; + break; + default: + break; + } + if (isp->phy.state == state && !extra) + return; + pr_debug("otg: %s FSM %s/%02x, %s, %06x\n", tag, + usb_otg_state_string(state), fsm, state_name(isp), + omap_readl(OTG_CTRL)); +} + +#else + +static inline void check_state(struct isp1301 *isp, const char *tag) { } + +#endif + +/* outputs from ISP1301_INTERRUPT_SOURCE */ +static void update_otg1(struct isp1301 *isp, u8 int_src) +{ + u32 otg_ctrl; + + otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; + otg_ctrl &= ~OTG_XCEIV_INPUTS; + otg_ctrl &= ~(OTG_ID|OTG_ASESSVLD|OTG_VBUSVLD); + + if (int_src & INTR_SESS_VLD) + otg_ctrl |= OTG_ASESSVLD; + else if (isp->phy.state == OTG_STATE_A_WAIT_VFALL) { + a_idle(isp, "vfall"); + otg_ctrl &= ~OTG_CTRL_BITS; + } + if (int_src & INTR_VBUS_VLD) + otg_ctrl |= OTG_VBUSVLD; + if (int_src & INTR_ID_GND) { /* default-A */ + if (isp->phy.state == OTG_STATE_B_IDLE + || isp->phy.state + == OTG_STATE_UNDEFINED) { + a_idle(isp, "init"); + return; + } + } else { /* default-B */ + otg_ctrl |= OTG_ID; + if (isp->phy.state == OTG_STATE_A_IDLE + || isp->phy.state == OTG_STATE_UNDEFINED) { + b_idle(isp, "init"); + return; + } + } + omap_writel(otg_ctrl, OTG_CTRL); +} + +/* outputs from ISP1301_OTG_STATUS */ +static void update_otg2(struct isp1301 *isp, u8 otg_status) +{ + u32 otg_ctrl; + + otg_ctrl = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; + otg_ctrl &= ~OTG_XCEIV_INPUTS; + otg_ctrl &= ~(OTG_BSESSVLD | OTG_BSESSEND); + if (otg_status & OTG_B_SESS_VLD) + otg_ctrl |= OTG_BSESSVLD; + else if (otg_status & OTG_B_SESS_END) + otg_ctrl |= OTG_BSESSEND; + omap_writel(otg_ctrl, OTG_CTRL); +} + +/* inputs going to ISP1301 */ +static void otg_update_isp(struct isp1301 *isp) +{ + u32 otg_ctrl, otg_change; + u8 set = OTG1_DM_PULLDOWN, clr = OTG1_DM_PULLUP; + + otg_ctrl = omap_readl(OTG_CTRL); + otg_change = otg_ctrl ^ isp->last_otg_ctrl; + isp->last_otg_ctrl = otg_ctrl; + otg_ctrl = otg_ctrl & OTG_XCEIV_INPUTS; + + switch (isp->phy.state) { + case OTG_STATE_B_IDLE: + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_SRP_INIT: + if (!(otg_ctrl & OTG_PULLUP)) { + // if (otg_ctrl & OTG_B_HNPEN) { + if (isp->phy.otg->gadget->b_hnp_enable) { + isp->phy.state = OTG_STATE_B_WAIT_ACON; + pr_debug(" --> b_wait_acon\n"); + } + goto pulldown; + } +pullup: + set |= OTG1_DP_PULLUP; + clr |= OTG1_DP_PULLDOWN; + break; + case OTG_STATE_A_SUSPEND: + case OTG_STATE_A_PERIPHERAL: + if (otg_ctrl & OTG_PULLUP) + goto pullup; + /* FALLTHROUGH */ + // case OTG_STATE_B_WAIT_ACON: + default: +pulldown: + set |= OTG1_DP_PULLDOWN; + clr |= OTG1_DP_PULLUP; + break; + } + +# define toggle(OTG,ISP) do { \ + if (otg_ctrl & OTG) set |= ISP; \ + else clr |= ISP; \ + } while (0) + + if (!(isp->phy.otg->host)) + otg_ctrl &= ~OTG_DRV_VBUS; + + switch (isp->phy.state) { + case OTG_STATE_A_SUSPEND: + if (otg_ctrl & OTG_DRV_VBUS) { + set |= OTG1_VBUS_DRV; + break; + } + /* HNP failed for some reason (A_AIDL_BDIS timeout) */ + notresponding(isp); + + /* FALLTHROUGH */ + case OTG_STATE_A_VBUS_ERR: + isp->phy.state = OTG_STATE_A_WAIT_VFALL; + pr_debug(" --> a_wait_vfall\n"); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_VFALL: + /* FIXME usbcore thinks port power is still on ... */ + clr |= OTG1_VBUS_DRV; + break; + case OTG_STATE_A_IDLE: + if (otg_ctrl & OTG_DRV_VBUS) { + isp->phy.state = OTG_STATE_A_WAIT_VRISE; + pr_debug(" --> a_wait_vrise\n"); + } + /* FALLTHROUGH */ + default: + toggle(OTG_DRV_VBUS, OTG1_VBUS_DRV); + } + + toggle(OTG_PU_VBUS, OTG1_VBUS_CHRG); + toggle(OTG_PD_VBUS, OTG1_VBUS_DISCHRG); + +# undef toggle + + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, set); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, clr); + + /* HNP switch to host or peripheral; and SRP */ + if (otg_change & OTG_PULLUP) { + u32 l; + + switch (isp->phy.state) { + case OTG_STATE_B_IDLE: + if (clr & OTG1_DP_PULLUP) + break; + isp->phy.state = OTG_STATE_B_PERIPHERAL; + pr_debug(" --> b_peripheral\n"); + break; + case OTG_STATE_A_SUSPEND: + if (clr & OTG1_DP_PULLUP) + break; + isp->phy.state = OTG_STATE_A_PERIPHERAL; + pr_debug(" --> a_peripheral\n"); + break; + default: + break; + } + l = omap_readl(OTG_CTRL); + l |= OTG_PULLUP; + omap_writel(l, OTG_CTRL); + } + + check_state(isp, __func__); + dump_regs(isp, "otg->isp1301"); +} + +static irqreturn_t omap_otg_irq(int irq, void *_isp) +{ + u16 otg_irq = omap_readw(OTG_IRQ_SRC); + u32 otg_ctrl; + int ret = IRQ_NONE; + struct isp1301 *isp = _isp; + struct usb_otg *otg = isp->phy.otg; + + /* update ISP1301 transceiver from OTG controller */ + if (otg_irq & OPRT_CHG) { + omap_writew(OPRT_CHG, OTG_IRQ_SRC); + isp1301_defer_work(isp, WORK_UPDATE_ISP); + ret = IRQ_HANDLED; + + /* SRP to become b_peripheral failed */ + } else if (otg_irq & B_SRP_TMROUT) { + pr_debug("otg: B_SRP_TIMEOUT, %06x\n", omap_readl(OTG_CTRL)); + notresponding(isp); + + /* gadget drivers that care should monitor all kinds of + * remote wakeup (SRP, normal) using their own timer + * to give "check cable and A-device" messages. + */ + if (isp->phy.state == OTG_STATE_B_SRP_INIT) + b_idle(isp, "srp_timeout"); + + omap_writew(B_SRP_TMROUT, OTG_IRQ_SRC); + ret = IRQ_HANDLED; + + /* HNP to become b_host failed */ + } else if (otg_irq & B_HNP_FAIL) { + pr_debug("otg: %s B_HNP_FAIL, %06x\n", + state_name(isp), omap_readl(OTG_CTRL)); + notresponding(isp); + + otg_ctrl = omap_readl(OTG_CTRL); + otg_ctrl |= OTG_BUSDROP; + otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + omap_writel(otg_ctrl, OTG_CTRL); + + /* subset of b_peripheral()... */ + isp->phy.state = OTG_STATE_B_PERIPHERAL; + pr_debug(" --> b_peripheral\n"); + + omap_writew(B_HNP_FAIL, OTG_IRQ_SRC); + ret = IRQ_HANDLED; + + /* detect SRP from B-device ... */ + } else if (otg_irq & A_SRP_DETECT) { + pr_debug("otg: %s SRP_DETECT, %06x\n", + state_name(isp), omap_readl(OTG_CTRL)); + + isp1301_defer_work(isp, WORK_UPDATE_OTG); + switch (isp->phy.state) { + case OTG_STATE_A_IDLE: + if (!otg->host) + break; + isp1301_defer_work(isp, WORK_HOST_RESUME); + otg_ctrl = omap_readl(OTG_CTRL); + otg_ctrl |= OTG_A_BUSREQ; + otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) + & ~OTG_XCEIV_INPUTS + & OTG_CTRL_MASK; + omap_writel(otg_ctrl, OTG_CTRL); + break; + default: + break; + } + + omap_writew(A_SRP_DETECT, OTG_IRQ_SRC); + ret = IRQ_HANDLED; + + /* timer expired: T(a_wait_bcon) and maybe T(a_wait_vrise) + * we don't track them separately + */ + } else if (otg_irq & A_REQ_TMROUT) { + otg_ctrl = omap_readl(OTG_CTRL); + pr_info("otg: BCON_TMOUT from %s, %06x\n", + state_name(isp), otg_ctrl); + notresponding(isp); + + otg_ctrl |= OTG_BUSDROP; + otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + omap_writel(otg_ctrl, OTG_CTRL); + isp->phy.state = OTG_STATE_A_WAIT_VFALL; + + omap_writew(A_REQ_TMROUT, OTG_IRQ_SRC); + ret = IRQ_HANDLED; + + /* A-supplied voltage fell too low; overcurrent */ + } else if (otg_irq & A_VBUS_ERR) { + otg_ctrl = omap_readl(OTG_CTRL); + printk(KERN_ERR "otg: %s, VBUS_ERR %04x ctrl %06x\n", + state_name(isp), otg_irq, otg_ctrl); + + otg_ctrl |= OTG_BUSDROP; + otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + omap_writel(otg_ctrl, OTG_CTRL); + isp->phy.state = OTG_STATE_A_VBUS_ERR; + + omap_writew(A_VBUS_ERR, OTG_IRQ_SRC); + ret = IRQ_HANDLED; + + /* switch driver; the transceiver code activates it, + * ungating the udc clock or resuming OHCI. + */ + } else if (otg_irq & DRIVER_SWITCH) { + int kick = 0; + + otg_ctrl = omap_readl(OTG_CTRL); + printk(KERN_NOTICE "otg: %s, SWITCH to %s, ctrl %06x\n", + state_name(isp), + (otg_ctrl & OTG_DRIVER_SEL) + ? "gadget" : "host", + otg_ctrl); + isp1301_defer_work(isp, WORK_UPDATE_ISP); + + /* role is peripheral */ + if (otg_ctrl & OTG_DRIVER_SEL) { + switch (isp->phy.state) { + case OTG_STATE_A_IDLE: + b_idle(isp, __func__); + break; + default: + break; + } + isp1301_defer_work(isp, WORK_UPDATE_ISP); + + /* role is host */ + } else { + if (!(otg_ctrl & OTG_ID)) { + otg_ctrl &= OTG_CTRL_MASK & ~OTG_XCEIV_INPUTS; + omap_writel(otg_ctrl | OTG_A_BUSREQ, OTG_CTRL); + } + + if (otg->host) { + switch (isp->phy.state) { + case OTG_STATE_B_WAIT_ACON: + isp->phy.state = OTG_STATE_B_HOST; + pr_debug(" --> b_host\n"); + kick = 1; + break; + case OTG_STATE_A_WAIT_BCON: + isp->phy.state = OTG_STATE_A_HOST; + pr_debug(" --> a_host\n"); + break; + case OTG_STATE_A_PERIPHERAL: + isp->phy.state = OTG_STATE_A_WAIT_BCON; + pr_debug(" --> a_wait_bcon\n"); + break; + default: + break; + } + isp1301_defer_work(isp, WORK_HOST_RESUME); + } + } + + omap_writew(DRIVER_SWITCH, OTG_IRQ_SRC); + ret = IRQ_HANDLED; + + if (kick) + usb_bus_start_enum(otg->host, otg->host->otg_port); + } + + check_state(isp, __func__); + return ret; +} + +static struct platform_device *otg_dev; + +static int isp1301_otg_init(struct isp1301 *isp) +{ + u32 l; + + if (!otg_dev) + return -ENODEV; + + dump_regs(isp, __func__); + /* some of these values are board-specific... */ + l = omap_readl(OTG_SYSCON_2); + l |= OTG_EN + /* for B-device: */ + | SRP_GPDATA /* 9msec Bdev D+ pulse */ + | SRP_GPDVBUS /* discharge after VBUS pulse */ + // | (3 << 24) /* 2msec VBUS pulse */ + /* for A-device: */ + | (0 << 20) /* 200ms nominal A_WAIT_VRISE timer */ + | SRP_DPW /* detect 167+ns SRP pulses */ + | SRP_DATA | SRP_VBUS /* accept both kinds of SRP pulse */ + ; + omap_writel(l, OTG_SYSCON_2); + + update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); + update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); + + check_state(isp, __func__); + pr_debug("otg: %s, %s %06x\n", + state_name(isp), __func__, omap_readl(OTG_CTRL)); + + omap_writew(DRIVER_SWITCH | OPRT_CHG + | B_SRP_TMROUT | B_HNP_FAIL + | A_VBUS_ERR | A_SRP_DETECT | A_REQ_TMROUT, OTG_IRQ_EN); + + l = omap_readl(OTG_SYSCON_2); + l |= OTG_EN; + omap_writel(l, OTG_SYSCON_2); + + return 0; +} + +static int otg_probe(struct platform_device *dev) +{ + // struct omap_usb_config *config = dev->platform_data; + + otg_dev = dev; + return 0; +} + +static int otg_remove(struct platform_device *dev) +{ + otg_dev = NULL; + return 0; +} + +static struct platform_driver omap_otg_driver = { + .probe = otg_probe, + .remove = otg_remove, + .driver = { + .owner = THIS_MODULE, + .name = "omap_otg", + }, +}; + +static int otg_bind(struct isp1301 *isp) +{ + int status; + + if (otg_dev) + return -EBUSY; + + status = platform_driver_register(&omap_otg_driver); + if (status < 0) + return status; + + if (otg_dev) + status = request_irq(otg_dev->resource[1].start, omap_otg_irq, + 0, DRIVER_NAME, isp); + else + status = -ENODEV; + + if (status < 0) + platform_driver_unregister(&omap_otg_driver); + return status; +} + +static void otg_unbind(struct isp1301 *isp) +{ + if (!otg_dev) + return; + free_irq(otg_dev->resource[1].start, isp); +} + +#else + +/* OTG controller isn't clocked */ + +#endif /* CONFIG_USB_OTG */ + +/*-------------------------------------------------------------------------*/ + +static void b_peripheral(struct isp1301 *isp) +{ + u32 l; + + l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; + omap_writel(l, OTG_CTRL); + + usb_gadget_vbus_connect(isp->phy.otg->gadget); + +#ifdef CONFIG_USB_OTG + enable_vbus_draw(isp, 8); + otg_update_isp(isp); +#else + enable_vbus_draw(isp, 100); + /* UDC driver just set OTG_BSESSVLD */ + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLUP); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_DP_PULLDOWN); + isp->phy.state = OTG_STATE_B_PERIPHERAL; + pr_debug(" --> b_peripheral\n"); + dump_regs(isp, "2periph"); +#endif +} + +static void isp_update_otg(struct isp1301 *isp, u8 stat) +{ + struct usb_otg *otg = isp->phy.otg; + u8 isp_stat, isp_bstat; + enum usb_otg_state state = isp->phy.state; + + if (stat & INTR_BDIS_ACON) + pr_debug("OTG: BDIS_ACON, %s\n", state_name(isp)); + + /* start certain state transitions right away */ + isp_stat = isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE); + if (isp_stat & INTR_ID_GND) { + if (otg->default_a) { + switch (state) { + case OTG_STATE_B_IDLE: + a_idle(isp, "idle"); + /* FALLTHROUGH */ + case OTG_STATE_A_IDLE: + enable_vbus_source(isp); + /* FALLTHROUGH */ + case OTG_STATE_A_WAIT_VRISE: + /* we skip over OTG_STATE_A_WAIT_BCON, since + * the HC will transition to A_HOST (or + * A_SUSPEND!) without our noticing except + * when HNP is used. + */ + if (isp_stat & INTR_VBUS_VLD) + isp->phy.state = OTG_STATE_A_HOST; + break; + case OTG_STATE_A_WAIT_VFALL: + if (!(isp_stat & INTR_SESS_VLD)) + a_idle(isp, "vfell"); + break; + default: + if (!(isp_stat & INTR_VBUS_VLD)) + isp->phy.state = OTG_STATE_A_VBUS_ERR; + break; + } + isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); + } else { + switch (state) { + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_HOST: + case OTG_STATE_B_WAIT_ACON: + usb_gadget_vbus_disconnect(otg->gadget); + break; + default: + break; + } + if (state != OTG_STATE_A_IDLE) + a_idle(isp, "id"); + if (otg->host && state == OTG_STATE_A_IDLE) + isp1301_defer_work(isp, WORK_HOST_RESUME); + isp_bstat = 0; + } + } else { + u32 l; + + /* if user unplugged mini-A end of cable, + * don't bypass A_WAIT_VFALL. + */ + if (otg->default_a) { + switch (state) { + default: + isp->phy.state = OTG_STATE_A_WAIT_VFALL; + break; + case OTG_STATE_A_WAIT_VFALL: + state = OTG_STATE_A_IDLE; + /* khubd may take a while to notice and + * handle this disconnect, so don't go + * to B_IDLE quite yet. + */ + break; + case OTG_STATE_A_IDLE: + host_suspend(isp); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, + MC1_BDIS_ACON_EN); + isp->phy.state = OTG_STATE_B_IDLE; + l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; + l &= ~OTG_CTRL_BITS; + omap_writel(l, OTG_CTRL); + break; + case OTG_STATE_B_IDLE: + break; + } + } + isp_bstat = isp1301_get_u8(isp, ISP1301_OTG_STATUS); + + switch (isp->phy.state) { + case OTG_STATE_B_PERIPHERAL: + case OTG_STATE_B_WAIT_ACON: + case OTG_STATE_B_HOST: + if (likely(isp_bstat & OTG_B_SESS_VLD)) + break; + enable_vbus_draw(isp, 0); +#ifndef CONFIG_USB_OTG + /* UDC driver will clear OTG_BSESSVLD */ + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, + OTG1_DP_PULLDOWN); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, + OTG1_DP_PULLUP); + dump_regs(isp, __func__); +#endif + /* FALLTHROUGH */ + case OTG_STATE_B_SRP_INIT: + b_idle(isp, __func__); + l = omap_readl(OTG_CTRL) & OTG_XCEIV_OUTPUTS; + omap_writel(l, OTG_CTRL); + /* FALLTHROUGH */ + case OTG_STATE_B_IDLE: + if (otg->gadget && (isp_bstat & OTG_B_SESS_VLD)) { +#ifdef CONFIG_USB_OTG + update_otg1(isp, isp_stat); + update_otg2(isp, isp_bstat); +#endif + b_peripheral(isp); + } else if (!(isp_stat & (INTR_VBUS_VLD|INTR_SESS_VLD))) + isp_bstat |= OTG_B_SESS_END; + break; + case OTG_STATE_A_WAIT_VFALL: + break; + default: + pr_debug("otg: unsupported b-device %s\n", + state_name(isp)); + break; + } + } + + if (state != isp->phy.state) + pr_debug(" isp, %s -> %s\n", + usb_otg_state_string(state), state_name(isp)); + +#ifdef CONFIG_USB_OTG + /* update the OTG controller state to match the isp1301; may + * trigger OPRT_CHG irqs for changes going to the isp1301. + */ + update_otg1(isp, isp_stat); + update_otg2(isp, isp_bstat); + check_state(isp, __func__); +#endif + + dump_regs(isp, "isp1301->otg"); +} + +/*-------------------------------------------------------------------------*/ + +static u8 isp1301_clear_latch(struct isp1301 *isp) +{ + u8 latch = isp1301_get_u8(isp, ISP1301_INTERRUPT_LATCH); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, latch); + return latch; +} + +static void +isp1301_work(struct work_struct *work) +{ + struct isp1301 *isp = container_of(work, struct isp1301, work); + int stop; + + /* implicit lock: we're the only task using this device */ + isp->working = 1; + do { + stop = test_bit(WORK_STOP, &isp->todo); + +#ifdef CONFIG_USB_OTG + /* transfer state from otg engine to isp1301 */ + if (test_and_clear_bit(WORK_UPDATE_ISP, &isp->todo)) { + otg_update_isp(isp); + put_device(&isp->client->dev); + } +#endif + /* transfer state from isp1301 to otg engine */ + if (test_and_clear_bit(WORK_UPDATE_OTG, &isp->todo)) { + u8 stat = isp1301_clear_latch(isp); + + isp_update_otg(isp, stat); + put_device(&isp->client->dev); + } + + if (test_and_clear_bit(WORK_HOST_RESUME, &isp->todo)) { + u32 otg_ctrl; + + /* + * skip A_WAIT_VRISE; hc transitions invisibly + * skip A_WAIT_BCON; same. + */ + switch (isp->phy.state) { + case OTG_STATE_A_WAIT_BCON: + case OTG_STATE_A_WAIT_VRISE: + isp->phy.state = OTG_STATE_A_HOST; + pr_debug(" --> a_host\n"); + otg_ctrl = omap_readl(OTG_CTRL); + otg_ctrl |= OTG_A_BUSREQ; + otg_ctrl &= ~(OTG_BUSDROP|OTG_B_BUSREQ) + & OTG_CTRL_MASK; + omap_writel(otg_ctrl, OTG_CTRL); + break; + case OTG_STATE_B_WAIT_ACON: + isp->phy.state = OTG_STATE_B_HOST; + pr_debug(" --> b_host (acon)\n"); + break; + case OTG_STATE_B_HOST: + case OTG_STATE_B_IDLE: + case OTG_STATE_A_IDLE: + break; + default: + pr_debug(" host resume in %s\n", + state_name(isp)); + } + host_resume(isp); + // mdelay(10); + put_device(&isp->client->dev); + } + + if (test_and_clear_bit(WORK_TIMER, &isp->todo)) { +#ifdef VERBOSE + dump_regs(isp, "timer"); + if (!stop) + mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); +#endif + put_device(&isp->client->dev); + } + + if (isp->todo) + dev_vdbg(&isp->client->dev, + "work done, todo = 0x%lx\n", + isp->todo); + if (stop) { + dev_dbg(&isp->client->dev, "stop\n"); + break; + } + } while (isp->todo); + isp->working = 0; +} + +static irqreturn_t isp1301_irq(int irq, void *isp) +{ + isp1301_defer_work(isp, WORK_UPDATE_OTG); + return IRQ_HANDLED; +} + +static void isp1301_timer(unsigned long _isp) +{ + isp1301_defer_work((void *)_isp, WORK_TIMER); +} + +/*-------------------------------------------------------------------------*/ + +static void isp1301_release(struct device *dev) +{ + struct isp1301 *isp; + + isp = dev_get_drvdata(dev); + + /* FIXME -- not with a "new style" driver, it doesn't!! */ + + /* ugly -- i2c hijacks our memory hook to wait_for_completion() */ + if (isp->i2c_release) + isp->i2c_release(dev); + kfree(isp->phy.otg); + kfree (isp); +} + +static struct isp1301 *the_transceiver; + +static int __exit isp1301_remove(struct i2c_client *i2c) +{ + struct isp1301 *isp; + + isp = i2c_get_clientdata(i2c); + + isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); + free_irq(i2c->irq, isp); +#ifdef CONFIG_USB_OTG + otg_unbind(isp); +#endif + if (machine_is_omap_h2()) + gpio_free(2); + + isp->timer.data = 0; + set_bit(WORK_STOP, &isp->todo); + del_timer_sync(&isp->timer); + flush_work(&isp->work); + + put_device(&i2c->dev); + the_transceiver = NULL; + + return 0; +} + +/*-------------------------------------------------------------------------*/ + +/* NOTE: three modes are possible here, only one of which + * will be standards-conformant on any given system: + * + * - OTG mode (dual-role), required if there's a Mini-AB connector + * - HOST mode, for when there's one or more A (host) connectors + * - DEVICE mode, for when there's a B/Mini-B (device) connector + * + * As a rule, you won't have an isp1301 chip unless it's there to + * support the OTG mode. Other modes help testing USB controllers + * in isolation from (full) OTG support, or maybe so later board + * revisions can help to support those feature. + */ + +#ifdef CONFIG_USB_OTG + +static int isp1301_otg_enable(struct isp1301 *isp) +{ + power_up(isp); + isp1301_otg_init(isp); + + /* NOTE: since we don't change this, this provides + * a few more interrupts than are strictly needed. + */ + isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, + INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); + isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, + INTR_VBUS_VLD | INTR_SESS_VLD | INTR_ID_GND); + + dev_info(&isp->client->dev, "ready for dual-role USB ...\n"); + + return 0; +} + +#endif + +/* add or disable the host device+driver */ +static int +isp1301_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + + if (!otg || isp != the_transceiver) + return -ENODEV; + + if (!host) { + omap_writew(0, OTG_IRQ_EN); + power_down(isp); + otg->host = NULL; + return 0; + } + +#ifdef CONFIG_USB_OTG + otg->host = host; + dev_dbg(&isp->client->dev, "registered host\n"); + host_suspend(isp); + if (otg->gadget) + return isp1301_otg_enable(isp); + return 0; + +#elif !defined(CONFIG_USB_GADGET_OMAP) + // FIXME update its refcount + otg->host = host; + + power_up(isp); + + if (machine_is_omap_h2()) + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); + + dev_info(&isp->client->dev, "A-Host sessions ok\n"); + isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, + INTR_ID_GND); + isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, + INTR_ID_GND); + + /* If this has a Mini-AB connector, this mode is highly + * nonstandard ... but can be handy for testing, especially with + * the Mini-A end of an OTG cable. (Or something nonstandard + * like MiniB-to-StandardB, maybe built with a gender mender.) + */ + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, OTG1_VBUS_DRV); + + dump_regs(isp, __func__); + + return 0; + +#else + dev_dbg(&isp->client->dev, "host sessions not allowed\n"); + return -EINVAL; +#endif + +} + +static int +isp1301_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) +{ + struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + + if (!otg || isp != the_transceiver) + return -ENODEV; + + if (!gadget) { + omap_writew(0, OTG_IRQ_EN); + if (!otg->default_a) + enable_vbus_draw(isp, 0); + usb_gadget_vbus_disconnect(otg->gadget); + otg->gadget = NULL; + power_down(isp); + return 0; + } + +#ifdef CONFIG_USB_OTG + otg->gadget = gadget; + dev_dbg(&isp->client->dev, "registered gadget\n"); + /* gadget driver may be suspended until vbus_connect () */ + if (otg->host) + return isp1301_otg_enable(isp); + return 0; + +#elif !defined(CONFIG_USB_OHCI_HCD) && !defined(CONFIG_USB_OHCI_HCD_MODULE) + otg->gadget = gadget; + // FIXME update its refcount + + { + u32 l; + + l = omap_readl(OTG_CTRL) & OTG_CTRL_MASK; + l &= ~(OTG_XCEIV_OUTPUTS|OTG_CTRL_BITS); + l |= OTG_ID; + omap_writel(l, OTG_CTRL); + } + + power_up(isp); + isp->phy.state = OTG_STATE_B_IDLE; + + if (machine_is_omap_h2() || machine_is_omap_h3()) + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, MC1_DAT_SE0); + + isp1301_set_bits(isp, ISP1301_INTERRUPT_RISING, + INTR_SESS_VLD); + isp1301_set_bits(isp, ISP1301_INTERRUPT_FALLING, + INTR_VBUS_VLD); + dev_info(&isp->client->dev, "B-Peripheral sessions ok\n"); + dump_regs(isp, __func__); + + /* If this has a Mini-AB connector, this mode is highly + * nonstandard ... but can be handy for testing, so long + * as you don't plug a Mini-A cable into the jack. + */ + if (isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE) & INTR_VBUS_VLD) + b_peripheral(isp); + + return 0; + +#else + dev_dbg(&isp->client->dev, "peripheral sessions not allowed\n"); + return -EINVAL; +#endif +} + + +/*-------------------------------------------------------------------------*/ + +static int +isp1301_set_power(struct usb_phy *dev, unsigned mA) +{ + if (!the_transceiver) + return -ENODEV; + if (dev->state == OTG_STATE_B_PERIPHERAL) + enable_vbus_draw(the_transceiver, mA); + return 0; +} + +static int +isp1301_start_srp(struct usb_otg *otg) +{ + struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + u32 otg_ctrl; + + if (!otg || isp != the_transceiver + || isp->phy.state != OTG_STATE_B_IDLE) + return -ENODEV; + + otg_ctrl = omap_readl(OTG_CTRL); + if (!(otg_ctrl & OTG_BSESSEND)) + return -EINVAL; + + otg_ctrl |= OTG_B_BUSREQ; + otg_ctrl &= ~OTG_A_BUSREQ & OTG_CTRL_MASK; + omap_writel(otg_ctrl, OTG_CTRL); + isp->phy.state = OTG_STATE_B_SRP_INIT; + + pr_debug("otg: SRP, %s ... %06x\n", state_name(isp), + omap_readl(OTG_CTRL)); +#ifdef CONFIG_USB_OTG + check_state(isp, __func__); +#endif + return 0; +} + +static int +isp1301_start_hnp(struct usb_otg *otg) +{ +#ifdef CONFIG_USB_OTG + struct isp1301 *isp = container_of(otg->phy, struct isp1301, phy); + u32 l; + + if (!otg || isp != the_transceiver) + return -ENODEV; + if (otg->default_a && (otg->host == NULL || !otg->host->b_hnp_enable)) + return -ENOTCONN; + if (!otg->default_a && (otg->gadget == NULL + || !otg->gadget->b_hnp_enable)) + return -ENOTCONN; + + /* We want hardware to manage most HNP protocol timings. + * So do this part as early as possible... + */ + switch (isp->phy.state) { + case OTG_STATE_B_HOST: + isp->phy.state = OTG_STATE_B_PERIPHERAL; + /* caller will suspend next */ + break; + case OTG_STATE_A_HOST: +#if 0 + /* autoconnect mode avoids irq latency bugs */ + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, + MC1_BDIS_ACON_EN); +#endif + /* caller must suspend then clear A_BUSREQ */ + usb_gadget_vbus_connect(otg->gadget); + l = omap_readl(OTG_CTRL); + l |= OTG_A_SETB_HNPEN; + omap_writel(l, OTG_CTRL); + + break; + case OTG_STATE_A_PERIPHERAL: + /* initiated by B-Host suspend */ + break; + default: + return -EILSEQ; + } + pr_debug("otg: HNP %s, %06x ...\n", + state_name(isp), omap_readl(OTG_CTRL)); + check_state(isp, __func__); + return 0; +#else + /* srp-only */ + return -EINVAL; +#endif +} + +/*-------------------------------------------------------------------------*/ + +static int +isp1301_probe(struct i2c_client *i2c, const struct i2c_device_id *id) +{ + int status; + struct isp1301 *isp; + + if (the_transceiver) + return 0; + + isp = kzalloc(sizeof *isp, GFP_KERNEL); + if (!isp) + return 0; + + isp->phy.otg = kzalloc(sizeof *isp->phy.otg, GFP_KERNEL); + if (!isp->phy.otg) { + kfree(isp); + return 0; + } + + INIT_WORK(&isp->work, isp1301_work); + init_timer(&isp->timer); + isp->timer.function = isp1301_timer; + isp->timer.data = (unsigned long) isp; + + i2c_set_clientdata(i2c, isp); + isp->client = i2c; + + /* verify the chip (shouldn't be necessary) */ + status = isp1301_get_u16(isp, ISP1301_VENDOR_ID); + if (status != I2C_VENDOR_ID_PHILIPS) { + dev_dbg(&i2c->dev, "not philips id: %d\n", status); + goto fail; + } + status = isp1301_get_u16(isp, ISP1301_PRODUCT_ID); + if (status != I2C_PRODUCT_ID_PHILIPS_1301) { + dev_dbg(&i2c->dev, "not isp1301, %d\n", status); + goto fail; + } + isp->i2c_release = i2c->dev.release; + i2c->dev.release = isp1301_release; + + /* initial development used chiprev 2.00 */ + status = i2c_smbus_read_word_data(i2c, ISP1301_BCD_DEVICE); + dev_info(&i2c->dev, "chiprev %x.%02x, driver " DRIVER_VERSION "\n", + status >> 8, status & 0xff); + + /* make like power-on reset */ + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_1, MC1_MASK); + + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, MC2_BI_DI); + isp1301_clear_bits(isp, ISP1301_MODE_CONTROL_2, ~MC2_BI_DI); + + isp1301_set_bits(isp, ISP1301_OTG_CONTROL_1, + OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN); + isp1301_clear_bits(isp, ISP1301_OTG_CONTROL_1, + ~(OTG1_DM_PULLDOWN | OTG1_DP_PULLDOWN)); + + isp1301_clear_bits(isp, ISP1301_INTERRUPT_LATCH, ~0); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_FALLING, ~0); + isp1301_clear_bits(isp, ISP1301_INTERRUPT_RISING, ~0); + +#ifdef CONFIG_USB_OTG + status = otg_bind(isp); + if (status < 0) { + dev_dbg(&i2c->dev, "can't bind OTG\n"); + goto fail; + } +#endif + + if (machine_is_omap_h2()) { + /* full speed signaling by default */ + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_1, + MC1_SPEED); + isp1301_set_bits(isp, ISP1301_MODE_CONTROL_2, + MC2_SPD_SUSP_CTRL); + + /* IRQ wired at M14 */ + omap_cfg_reg(M14_1510_GPIO2); + if (gpio_request(2, "isp1301") == 0) + gpio_direction_input(2); + isp->irq_type = IRQF_TRIGGER_FALLING; + } + + status = request_irq(i2c->irq, isp1301_irq, + isp->irq_type, DRIVER_NAME, isp); + if (status < 0) { + dev_dbg(&i2c->dev, "can't get IRQ %d, err %d\n", + i2c->irq, status); + goto fail; + } + + isp->phy.dev = &i2c->dev; + isp->phy.label = DRIVER_NAME; + isp->phy.set_power = isp1301_set_power, + + isp->phy.otg->phy = &isp->phy; + isp->phy.otg->set_host = isp1301_set_host, + isp->phy.otg->set_peripheral = isp1301_set_peripheral, + isp->phy.otg->start_srp = isp1301_start_srp, + isp->phy.otg->start_hnp = isp1301_start_hnp, + + enable_vbus_draw(isp, 0); + power_down(isp); + the_transceiver = isp; + +#ifdef CONFIG_USB_OTG + update_otg1(isp, isp1301_get_u8(isp, ISP1301_INTERRUPT_SOURCE)); + update_otg2(isp, isp1301_get_u8(isp, ISP1301_OTG_STATUS)); +#endif + + dump_regs(isp, __func__); + +#ifdef VERBOSE + mod_timer(&isp->timer, jiffies + TIMER_JIFFIES); + dev_dbg(&i2c->dev, "scheduled timer, %d min\n", TIMER_MINUTES); +#endif + + status = usb_add_phy(&isp->phy, USB_PHY_TYPE_USB2); + if (status < 0) + dev_err(&i2c->dev, "can't register transceiver, %d\n", + status); + + return 0; + +fail: + kfree(isp->phy.otg); + kfree(isp); + return -ENODEV; +} + +static const struct i2c_device_id isp1301_id[] = { + { "isp1301_omap", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, isp1301_id); + +static struct i2c_driver isp1301_driver = { + .driver = { + .name = "isp1301_omap", + }, + .probe = isp1301_probe, + .remove = __exit_p(isp1301_remove), + .id_table = isp1301_id, +}; + +/*-------------------------------------------------------------------------*/ + +static int __init isp_init(void) +{ + return i2c_add_driver(&isp1301_driver); +} +subsys_initcall(isp_init); + +static void __exit isp_exit(void) +{ + if (the_transceiver) + usb_remove_phy(&the_transceiver->phy); + i2c_del_driver(&isp1301_driver); +} +module_exit(isp_exit); + diff --git a/drivers/usb/phy/phy-isp1301.c b/drivers/usb/phy/phy-isp1301.c new file mode 100644 index 0000000..18dbf7e --- /dev/null +++ b/drivers/usb/phy/phy-isp1301.c @@ -0,0 +1,71 @@ +/* + * NXP ISP1301 USB transceiver driver + * + * Copyright (C) 2012 Roland Stigge + * + * Author: Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include + +#define DRV_NAME "isp1301" + +static const struct i2c_device_id isp1301_id[] = { + { "isp1301", 0 }, + { } +}; + +static struct i2c_client *isp1301_i2c_client; + +static int isp1301_probe(struct i2c_client *client, + const struct i2c_device_id *i2c_id) +{ + isp1301_i2c_client = client; + return 0; +} + +static int isp1301_remove(struct i2c_client *client) +{ + return 0; +} + +static struct i2c_driver isp1301_driver = { + .driver = { + .name = DRV_NAME, + }, + .probe = isp1301_probe, + .remove = isp1301_remove, + .id_table = isp1301_id, +}; + +module_i2c_driver(isp1301_driver); + +static int match(struct device *dev, void *data) +{ + struct device_node *node = (struct device_node *)data; + return (dev->of_node == node) && + (dev->driver == &isp1301_driver.driver); +} + +struct i2c_client *isp1301_get_client(struct device_node *node) +{ + if (node) { /* reference of ISP1301 I2C node via DT */ + struct device *dev = bus_find_device(&i2c_bus_type, NULL, + node, match); + if (!dev) + return NULL; + return to_i2c_client(dev); + } else { /* non-DT: only one ISP1301 chip supported */ + return isp1301_i2c_client; + } +} +EXPORT_SYMBOL_GPL(isp1301_get_client); + +MODULE_AUTHOR("Roland Stigge "); +MODULE_DESCRIPTION("NXP ISP1301 USB transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c new file mode 100644 index 0000000..749fbf4 --- /dev/null +++ b/drivers/usb/phy/phy-msm-usb.c @@ -0,0 +1,1762 @@ +/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#define MSM_USB_BASE (motg->regs) +#define DRIVER_NAME "msm_otg" + +#define ULPI_IO_TIMEOUT_USEC (10 * 1000) + +#define USB_PHY_3P3_VOL_MIN 3050000 /* uV */ +#define USB_PHY_3P3_VOL_MAX 3300000 /* uV */ +#define USB_PHY_3P3_HPM_LOAD 50000 /* uA */ +#define USB_PHY_3P3_LPM_LOAD 4000 /* uA */ + +#define USB_PHY_1P8_VOL_MIN 1800000 /* uV */ +#define USB_PHY_1P8_VOL_MAX 1800000 /* uV */ +#define USB_PHY_1P8_HPM_LOAD 50000 /* uA */ +#define USB_PHY_1P8_LPM_LOAD 4000 /* uA */ + +#define USB_PHY_VDD_DIG_VOL_MIN 1000000 /* uV */ +#define USB_PHY_VDD_DIG_VOL_MAX 1320000 /* uV */ + +static struct regulator *hsusb_3p3; +static struct regulator *hsusb_1p8; +static struct regulator *hsusb_vddcx; + +static int msm_hsusb_init_vddcx(struct msm_otg *motg, int init) +{ + int ret = 0; + + if (init) { + hsusb_vddcx = regulator_get(motg->phy.dev, "HSUSB_VDDCX"); + if (IS_ERR(hsusb_vddcx)) { + dev_err(motg->phy.dev, "unable to get hsusb vddcx\n"); + return PTR_ERR(hsusb_vddcx); + } + + ret = regulator_set_voltage(hsusb_vddcx, + USB_PHY_VDD_DIG_VOL_MIN, + USB_PHY_VDD_DIG_VOL_MAX); + if (ret) { + dev_err(motg->phy.dev, "unable to set the voltage " + "for hsusb vddcx\n"); + regulator_put(hsusb_vddcx); + return ret; + } + + ret = regulator_enable(hsusb_vddcx); + if (ret) { + dev_err(motg->phy.dev, "unable to enable hsusb vddcx\n"); + regulator_put(hsusb_vddcx); + } + } else { + ret = regulator_set_voltage(hsusb_vddcx, 0, + USB_PHY_VDD_DIG_VOL_MAX); + if (ret) + dev_err(motg->phy.dev, "unable to set the voltage " + "for hsusb vddcx\n"); + ret = regulator_disable(hsusb_vddcx); + if (ret) + dev_err(motg->phy.dev, "unable to disable hsusb vddcx\n"); + + regulator_put(hsusb_vddcx); + } + + return ret; +} + +static int msm_hsusb_ldo_init(struct msm_otg *motg, int init) +{ + int rc = 0; + + if (init) { + hsusb_3p3 = regulator_get(motg->phy.dev, "HSUSB_3p3"); + if (IS_ERR(hsusb_3p3)) { + dev_err(motg->phy.dev, "unable to get hsusb 3p3\n"); + return PTR_ERR(hsusb_3p3); + } + + rc = regulator_set_voltage(hsusb_3p3, USB_PHY_3P3_VOL_MIN, + USB_PHY_3P3_VOL_MAX); + if (rc) { + dev_err(motg->phy.dev, "unable to set voltage level " + "for hsusb 3p3\n"); + goto put_3p3; + } + rc = regulator_enable(hsusb_3p3); + if (rc) { + dev_err(motg->phy.dev, "unable to enable the hsusb 3p3\n"); + goto put_3p3; + } + hsusb_1p8 = regulator_get(motg->phy.dev, "HSUSB_1p8"); + if (IS_ERR(hsusb_1p8)) { + dev_err(motg->phy.dev, "unable to get hsusb 1p8\n"); + rc = PTR_ERR(hsusb_1p8); + goto disable_3p3; + } + rc = regulator_set_voltage(hsusb_1p8, USB_PHY_1P8_VOL_MIN, + USB_PHY_1P8_VOL_MAX); + if (rc) { + dev_err(motg->phy.dev, "unable to set voltage level " + "for hsusb 1p8\n"); + goto put_1p8; + } + rc = regulator_enable(hsusb_1p8); + if (rc) { + dev_err(motg->phy.dev, "unable to enable the hsusb 1p8\n"); + goto put_1p8; + } + + return 0; + } + + regulator_disable(hsusb_1p8); +put_1p8: + regulator_put(hsusb_1p8); +disable_3p3: + regulator_disable(hsusb_3p3); +put_3p3: + regulator_put(hsusb_3p3); + return rc; +} + +#ifdef CONFIG_PM_SLEEP +#define USB_PHY_SUSP_DIG_VOL 500000 +static int msm_hsusb_config_vddcx(int high) +{ + int max_vol = USB_PHY_VDD_DIG_VOL_MAX; + int min_vol; + int ret; + + if (high) + min_vol = USB_PHY_VDD_DIG_VOL_MIN; + else + min_vol = USB_PHY_SUSP_DIG_VOL; + + ret = regulator_set_voltage(hsusb_vddcx, min_vol, max_vol); + if (ret) { + pr_err("%s: unable to set the voltage for regulator " + "HSUSB_VDDCX\n", __func__); + return ret; + } + + pr_debug("%s: min_vol:%d max_vol:%d\n", __func__, min_vol, max_vol); + + return ret; +} +#endif + +static int msm_hsusb_ldo_set_mode(int on) +{ + int ret = 0; + + if (!hsusb_1p8 || IS_ERR(hsusb_1p8)) { + pr_err("%s: HSUSB_1p8 is not initialized\n", __func__); + return -ENODEV; + } + + if (!hsusb_3p3 || IS_ERR(hsusb_3p3)) { + pr_err("%s: HSUSB_3p3 is not initialized\n", __func__); + return -ENODEV; + } + + if (on) { + ret = regulator_set_optimum_mode(hsusb_1p8, + USB_PHY_1P8_HPM_LOAD); + if (ret < 0) { + pr_err("%s: Unable to set HPM of the regulator " + "HSUSB_1p8\n", __func__); + return ret; + } + ret = regulator_set_optimum_mode(hsusb_3p3, + USB_PHY_3P3_HPM_LOAD); + if (ret < 0) { + pr_err("%s: Unable to set HPM of the regulator " + "HSUSB_3p3\n", __func__); + regulator_set_optimum_mode(hsusb_1p8, + USB_PHY_1P8_LPM_LOAD); + return ret; + } + } else { + ret = regulator_set_optimum_mode(hsusb_1p8, + USB_PHY_1P8_LPM_LOAD); + if (ret < 0) + pr_err("%s: Unable to set LPM of the regulator " + "HSUSB_1p8\n", __func__); + ret = regulator_set_optimum_mode(hsusb_3p3, + USB_PHY_3P3_LPM_LOAD); + if (ret < 0) + pr_err("%s: Unable to set LPM of the regulator " + "HSUSB_3p3\n", __func__); + } + + pr_debug("reg (%s)\n", on ? "HPM" : "LPM"); + return ret < 0 ? ret : 0; +} + +static int ulpi_read(struct usb_phy *phy, u32 reg) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + int cnt = 0; + + /* initiate read operation */ + writel(ULPI_RUN | ULPI_READ | ULPI_ADDR(reg), + USB_ULPI_VIEWPORT); + + /* wait for completion */ + while (cnt < ULPI_IO_TIMEOUT_USEC) { + if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) + break; + udelay(1); + cnt++; + } + + if (cnt >= ULPI_IO_TIMEOUT_USEC) { + dev_err(phy->dev, "ulpi_read: timeout %08x\n", + readl(USB_ULPI_VIEWPORT)); + return -ETIMEDOUT; + } + return ULPI_DATA_READ(readl(USB_ULPI_VIEWPORT)); +} + +static int ulpi_write(struct usb_phy *phy, u32 val, u32 reg) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + int cnt = 0; + + /* initiate write operation */ + writel(ULPI_RUN | ULPI_WRITE | + ULPI_ADDR(reg) | ULPI_DATA(val), + USB_ULPI_VIEWPORT); + + /* wait for completion */ + while (cnt < ULPI_IO_TIMEOUT_USEC) { + if (!(readl(USB_ULPI_VIEWPORT) & ULPI_RUN)) + break; + udelay(1); + cnt++; + } + + if (cnt >= ULPI_IO_TIMEOUT_USEC) { + dev_err(phy->dev, "ulpi_write: timeout\n"); + return -ETIMEDOUT; + } + return 0; +} + +static struct usb_phy_io_ops msm_otg_io_ops = { + .read = ulpi_read, + .write = ulpi_write, +}; + +static void ulpi_init(struct msm_otg *motg) +{ + struct msm_otg_platform_data *pdata = motg->pdata; + int *seq = pdata->phy_init_seq; + + if (!seq) + return; + + while (seq[0] >= 0) { + dev_vdbg(motg->phy.dev, "ulpi: write 0x%02x to 0x%02x\n", + seq[0], seq[1]); + ulpi_write(&motg->phy, seq[0], seq[1]); + seq += 2; + } +} + +static int msm_otg_link_clk_reset(struct msm_otg *motg, bool assert) +{ + int ret; + + if (assert) { + ret = clk_reset(motg->clk, CLK_RESET_ASSERT); + if (ret) + dev_err(motg->phy.dev, "usb hs_clk assert failed\n"); + } else { + ret = clk_reset(motg->clk, CLK_RESET_DEASSERT); + if (ret) + dev_err(motg->phy.dev, "usb hs_clk deassert failed\n"); + } + return ret; +} + +static int msm_otg_phy_clk_reset(struct msm_otg *motg) +{ + int ret; + + ret = clk_reset(motg->phy_reset_clk, CLK_RESET_ASSERT); + if (ret) { + dev_err(motg->phy.dev, "usb phy clk assert failed\n"); + return ret; + } + usleep_range(10000, 12000); + ret = clk_reset(motg->phy_reset_clk, CLK_RESET_DEASSERT); + if (ret) + dev_err(motg->phy.dev, "usb phy clk deassert failed\n"); + return ret; +} + +static int msm_otg_phy_reset(struct msm_otg *motg) +{ + u32 val; + int ret; + int retries; + + ret = msm_otg_link_clk_reset(motg, 1); + if (ret) + return ret; + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + ret = msm_otg_link_clk_reset(motg, 0); + if (ret) + return ret; + + val = readl(USB_PORTSC) & ~PORTSC_PTS_MASK; + writel(val | PORTSC_PTS_ULPI, USB_PORTSC); + + for (retries = 3; retries > 0; retries--) { + ret = ulpi_write(&motg->phy, ULPI_FUNC_CTRL_SUSPENDM, + ULPI_CLR(ULPI_FUNC_CTRL)); + if (!ret) + break; + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + } + if (!retries) + return -ETIMEDOUT; + + /* This reset calibrates the phy, if the above write succeeded */ + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + + for (retries = 3; retries > 0; retries--) { + ret = ulpi_read(&motg->phy, ULPI_DEBUG); + if (ret != -ETIMEDOUT) + break; + ret = msm_otg_phy_clk_reset(motg); + if (ret) + return ret; + } + if (!retries) + return -ETIMEDOUT; + + dev_info(motg->phy.dev, "phy_reset: success\n"); + return 0; +} + +#define LINK_RESET_TIMEOUT_USEC (250 * 1000) +static int msm_otg_reset(struct usb_phy *phy) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + int cnt = 0; + int ret; + u32 val = 0; + u32 ulpi_val = 0; + + ret = msm_otg_phy_reset(motg); + if (ret) { + dev_err(phy->dev, "phy_reset failed\n"); + return ret; + } + + ulpi_init(motg); + + writel(USBCMD_RESET, USB_USBCMD); + while (cnt < LINK_RESET_TIMEOUT_USEC) { + if (!(readl(USB_USBCMD) & USBCMD_RESET)) + break; + udelay(1); + cnt++; + } + if (cnt >= LINK_RESET_TIMEOUT_USEC) + return -ETIMEDOUT; + + /* select ULPI phy */ + writel(0x80000000, USB_PORTSC); + + msleep(100); + + writel(0x0, USB_AHBBURST); + writel(0x00, USB_AHBMODE); + + if (pdata->otg_control == OTG_PHY_CONTROL) { + val = readl(USB_OTGSC); + if (pdata->mode == USB_OTG) { + ulpi_val = ULPI_INT_IDGRD | ULPI_INT_SESS_VALID; + val |= OTGSC_IDIE | OTGSC_BSVIE; + } else if (pdata->mode == USB_PERIPHERAL) { + ulpi_val = ULPI_INT_SESS_VALID; + val |= OTGSC_BSVIE; + } + writel(val, USB_OTGSC); + ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_RISE); + ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); + } + + return 0; +} + +#define PHY_SUSPEND_TIMEOUT_USEC (500 * 1000) +#define PHY_RESUME_TIMEOUT_USEC (100 * 1000) + +#ifdef CONFIG_PM_SLEEP +static int msm_otg_suspend(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + struct usb_bus *bus = phy->otg->host; + struct msm_otg_platform_data *pdata = motg->pdata; + int cnt = 0; + + if (atomic_read(&motg->in_lpm)) + return 0; + + disable_irq(motg->irq); + /* + * Chipidea 45-nm PHY suspend sequence: + * + * Interrupt Latch Register auto-clear feature is not present + * in all PHY versions. Latch register is clear on read type. + * Clear latch register to avoid spurious wakeup from + * low power mode (LPM). + * + * PHY comparators are disabled when PHY enters into low power + * mode (LPM). Keep PHY comparators ON in LPM only when we expect + * VBUS/Id notifications from USB PHY. Otherwise turn off USB + * PHY comparators. This save significant amount of power. + * + * PLL is not turned off when PHY enters into low power mode (LPM). + * Disable PLL for maximum power savings. + */ + + if (motg->pdata->phy_type == CI_45NM_INTEGRATED_PHY) { + ulpi_read(phy, 0x14); + if (pdata->otg_control == OTG_PHY_CONTROL) + ulpi_write(phy, 0x01, 0x30); + ulpi_write(phy, 0x08, 0x09); + } + + /* + * PHY may take some time or even fail to enter into low power + * mode (LPM). Hence poll for 500 msec and reset the PHY and link + * in failure case. + */ + writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); + while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { + if (readl(USB_PORTSC) & PORTSC_PHCD) + break; + udelay(1); + cnt++; + } + + if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) { + dev_err(phy->dev, "Unable to suspend PHY\n"); + msm_otg_reset(phy); + enable_irq(motg->irq); + return -ETIMEDOUT; + } + + /* + * PHY has capability to generate interrupt asynchronously in low + * power mode (LPM). This interrupt is level triggered. So USB IRQ + * line must be disabled till async interrupt enable bit is cleared + * in USBCMD register. Assert STP (ULPI interface STOP signal) to + * block data communication from PHY. + */ + writel(readl(USB_USBCMD) | ASYNC_INTR_CTRL | ULPI_STP_CTRL, USB_USBCMD); + + if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && + motg->pdata->otg_control == OTG_PMIC_CONTROL) + writel(readl(USB_PHY_CTRL) | PHY_RETEN, USB_PHY_CTRL); + + clk_disable(motg->pclk); + clk_disable(motg->clk); + if (motg->core_clk) + clk_disable(motg->core_clk); + + if (!IS_ERR(motg->pclk_src)) + clk_disable(motg->pclk_src); + + if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && + motg->pdata->otg_control == OTG_PMIC_CONTROL) { + msm_hsusb_ldo_set_mode(0); + msm_hsusb_config_vddcx(0); + } + + if (device_may_wakeup(phy->dev)) + enable_irq_wake(motg->irq); + if (bus) + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); + + atomic_set(&motg->in_lpm, 1); + enable_irq(motg->irq); + + dev_info(phy->dev, "USB in low power mode\n"); + + return 0; +} + +static int msm_otg_resume(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + struct usb_bus *bus = phy->otg->host; + int cnt = 0; + unsigned temp; + + if (!atomic_read(&motg->in_lpm)) + return 0; + + if (!IS_ERR(motg->pclk_src)) + clk_enable(motg->pclk_src); + + clk_enable(motg->pclk); + clk_enable(motg->clk); + if (motg->core_clk) + clk_enable(motg->core_clk); + + if (motg->pdata->phy_type == SNPS_28NM_INTEGRATED_PHY && + motg->pdata->otg_control == OTG_PMIC_CONTROL) { + msm_hsusb_ldo_set_mode(1); + msm_hsusb_config_vddcx(1); + writel(readl(USB_PHY_CTRL) & ~PHY_RETEN, USB_PHY_CTRL); + } + + temp = readl(USB_USBCMD); + temp &= ~ASYNC_INTR_CTRL; + temp &= ~ULPI_STP_CTRL; + writel(temp, USB_USBCMD); + + /* + * PHY comes out of low power mode (LPM) in case of wakeup + * from asynchronous interrupt. + */ + if (!(readl(USB_PORTSC) & PORTSC_PHCD)) + goto skip_phy_resume; + + writel(readl(USB_PORTSC) & ~PORTSC_PHCD, USB_PORTSC); + while (cnt < PHY_RESUME_TIMEOUT_USEC) { + if (!(readl(USB_PORTSC) & PORTSC_PHCD)) + break; + udelay(1); + cnt++; + } + + if (cnt >= PHY_RESUME_TIMEOUT_USEC) { + /* + * This is a fatal error. Reset the link and + * PHY. USB state can not be restored. Re-insertion + * of USB cable is the only way to get USB working. + */ + dev_err(phy->dev, "Unable to resume USB." + "Re-plugin the cable\n"); + msm_otg_reset(phy); + } + +skip_phy_resume: + if (device_may_wakeup(phy->dev)) + disable_irq_wake(motg->irq); + if (bus) + set_bit(HCD_FLAG_HW_ACCESSIBLE, &(bus_to_hcd(bus))->flags); + + atomic_set(&motg->in_lpm, 0); + + if (motg->async_int) { + motg->async_int = 0; + pm_runtime_put(phy->dev); + enable_irq(motg->irq); + } + + dev_info(phy->dev, "USB exited from low power mode\n"); + + return 0; +} +#endif + +static void msm_otg_notify_charger(struct msm_otg *motg, unsigned mA) +{ + if (motg->cur_power == mA) + return; + + /* TODO: Notify PMIC about available current */ + dev_info(motg->phy.dev, "Avail curr from USB = %u\n", mA); + motg->cur_power = mA; +} + +static int msm_otg_set_power(struct usb_phy *phy, unsigned mA) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + + /* + * Gadget driver uses set_power method to notify about the + * available current based on suspend/configured states. + * + * IDEV_CHG can be drawn irrespective of suspend/un-configured + * states when CDP/ACA is connected. + */ + if (motg->chg_type == USB_SDP_CHARGER) + msm_otg_notify_charger(motg, mA); + + return 0; +} + +static void msm_otg_start_host(struct usb_phy *phy, int on) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + struct usb_hcd *hcd; + + if (!phy->otg->host) + return; + + hcd = bus_to_hcd(phy->otg->host); + + if (on) { + dev_dbg(phy->dev, "host on\n"); + + if (pdata->vbus_power) + pdata->vbus_power(1); + /* + * Some boards have a switch cotrolled by gpio + * to enable/disable internal HUB. Enable internal + * HUB before kicking the host. + */ + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_A_HOST); +#ifdef CONFIG_USB + usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); +#endif + } else { + dev_dbg(phy->dev, "host off\n"); + +#ifdef CONFIG_USB + usb_remove_hcd(hcd); +#endif + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_UNDEFINED); + if (pdata->vbus_power) + pdata->vbus_power(0); + } +} + +static int msm_otg_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); + struct usb_hcd *hcd; + + /* + * Fail host registration if this board can support + * only peripheral configuration. + */ + if (motg->pdata->mode == USB_PERIPHERAL) { + dev_info(otg->phy->dev, "Host mode is not supported\n"); + return -ENODEV; + } + + if (!host) { + if (otg->phy->state == OTG_STATE_A_HOST) { + pm_runtime_get_sync(otg->phy->dev); + msm_otg_start_host(otg->phy, 0); + otg->host = NULL; + otg->phy->state = OTG_STATE_UNDEFINED; + schedule_work(&motg->sm_work); + } else { + otg->host = NULL; + } + + return 0; + } + + hcd = bus_to_hcd(host); + hcd->power_budget = motg->pdata->power_budget; + + otg->host = host; + dev_dbg(otg->phy->dev, "host driver registered w/ tranceiver\n"); + + /* + * Kick the state machine work, if peripheral is not supported + * or peripheral is already registered with us. + */ + if (motg->pdata->mode == USB_HOST || otg->gadget) { + pm_runtime_get_sync(otg->phy->dev); + schedule_work(&motg->sm_work); + } + + return 0; +} + +static void msm_otg_start_peripheral(struct usb_phy *phy, int on) +{ + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); + struct msm_otg_platform_data *pdata = motg->pdata; + + if (!phy->otg->gadget) + return; + + if (on) { + dev_dbg(phy->dev, "gadget on\n"); + /* + * Some boards have a switch cotrolled by gpio + * to enable/disable internal HUB. Disable internal + * HUB before kicking the gadget. + */ + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_B_PERIPHERAL); + usb_gadget_vbus_connect(phy->otg->gadget); + } else { + dev_dbg(phy->dev, "gadget off\n"); + usb_gadget_vbus_disconnect(phy->otg->gadget); + if (pdata->setup_gpio) + pdata->setup_gpio(OTG_STATE_UNDEFINED); + } + +} + +static int msm_otg_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct msm_otg *motg = container_of(otg->phy, struct msm_otg, phy); + + /* + * Fail peripheral registration if this board can support + * only host configuration. + */ + if (motg->pdata->mode == USB_HOST) { + dev_info(otg->phy->dev, "Peripheral mode is not supported\n"); + return -ENODEV; + } + + if (!gadget) { + if (otg->phy->state == OTG_STATE_B_PERIPHERAL) { + pm_runtime_get_sync(otg->phy->dev); + msm_otg_start_peripheral(otg->phy, 0); + otg->gadget = NULL; + otg->phy->state = OTG_STATE_UNDEFINED; + schedule_work(&motg->sm_work); + } else { + otg->gadget = NULL; + } + + return 0; + } + otg->gadget = gadget; + dev_dbg(otg->phy->dev, "peripheral driver registered w/ tranceiver\n"); + + /* + * Kick the state machine work, if host is not supported + * or host is already registered with us. + */ + if (motg->pdata->mode == USB_PERIPHERAL || otg->host) { + pm_runtime_get_sync(otg->phy->dev); + schedule_work(&motg->sm_work); + } + + return 0; +} + +static bool msm_chg_check_secondary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + bool ret = false; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + ret = chg_det & (1 << 4); + break; + case SNPS_28NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x87); + ret = chg_det & 1; + break; + default: + break; + } + return ret; +} + +static void msm_chg_enable_secondary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* Turn off charger block */ + chg_det |= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + udelay(20); + /* control chg block via ULPI */ + chg_det &= ~(1 << 3); + ulpi_write(phy, chg_det, 0x34); + /* put it in host mode for enabling D- source */ + chg_det &= ~(1 << 2); + ulpi_write(phy, chg_det, 0x34); + /* Turn on chg detect block */ + chg_det &= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + udelay(20); + /* enable chg detection */ + chg_det &= ~(1 << 0); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* + * Configure DM as current source, DP as current sink + * and enable battery charging comparators. + */ + ulpi_write(phy, 0x8, 0x85); + ulpi_write(phy, 0x2, 0x85); + ulpi_write(phy, 0x1, 0x85); + break; + default: + break; + } +} + +static bool msm_chg_check_primary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + bool ret = false; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + ret = chg_det & (1 << 4); + break; + case SNPS_28NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x87); + ret = chg_det & 1; + break; + default: + break; + } + return ret; +} + +static void msm_chg_enable_primary_det(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* enable chg detection */ + chg_det &= ~(1 << 0); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* + * Configure DP as current source, DM as current sink + * and enable battery charging comparators. + */ + ulpi_write(phy, 0x2, 0x85); + ulpi_write(phy, 0x1, 0x85); + break; + default: + break; + } +} + +static bool msm_chg_check_dcd(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 line_state; + bool ret = false; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + line_state = ulpi_read(phy, 0x15); + ret = !(line_state & 1); + break; + case SNPS_28NM_INTEGRATED_PHY: + line_state = ulpi_read(phy, 0x87); + ret = line_state & 2; + break; + default: + break; + } + return ret; +} + +static void msm_chg_disable_dcd(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + chg_det &= ~(1 << 5); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + ulpi_write(phy, 0x10, 0x86); + break; + default: + break; + } +} + +static void msm_chg_enable_dcd(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* Turn on D+ current source */ + chg_det |= (1 << 5); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* Data contact detection enable */ + ulpi_write(phy, 0x10, 0x85); + break; + default: + break; + } +} + +static void msm_chg_block_on(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 func_ctrl, chg_det; + + /* put the controller in non-driving mode */ + func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); + func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; + ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* control chg block via ULPI */ + chg_det &= ~(1 << 3); + ulpi_write(phy, chg_det, 0x34); + /* Turn on chg detect block */ + chg_det &= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + udelay(20); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* Clear charger detecting control bits */ + ulpi_write(phy, 0x3F, 0x86); + /* Clear alt interrupt latch and enable bits */ + ulpi_write(phy, 0x1F, 0x92); + ulpi_write(phy, 0x1F, 0x95); + udelay(100); + break; + default: + break; + } +} + +static void msm_chg_block_off(struct msm_otg *motg) +{ + struct usb_phy *phy = &motg->phy; + u32 func_ctrl, chg_det; + + switch (motg->pdata->phy_type) { + case CI_45NM_INTEGRATED_PHY: + chg_det = ulpi_read(phy, 0x34); + /* Turn off charger block */ + chg_det |= ~(1 << 1); + ulpi_write(phy, chg_det, 0x34); + break; + case SNPS_28NM_INTEGRATED_PHY: + /* Clear charger detecting control bits */ + ulpi_write(phy, 0x3F, 0x86); + /* Clear alt interrupt latch and enable bits */ + ulpi_write(phy, 0x1F, 0x92); + ulpi_write(phy, 0x1F, 0x95); + break; + default: + break; + } + + /* put the controller in normal mode */ + func_ctrl = ulpi_read(phy, ULPI_FUNC_CTRL); + func_ctrl &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + func_ctrl |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, func_ctrl, ULPI_FUNC_CTRL); +} + +#define MSM_CHG_DCD_POLL_TIME (100 * HZ/1000) /* 100 msec */ +#define MSM_CHG_DCD_MAX_RETRIES 6 /* Tdcd_tmout = 6 * 100 msec */ +#define MSM_CHG_PRIMARY_DET_TIME (40 * HZ/1000) /* TVDPSRC_ON */ +#define MSM_CHG_SECONDARY_DET_TIME (40 * HZ/1000) /* TVDMSRC_ON */ +static void msm_chg_detect_work(struct work_struct *w) +{ + struct msm_otg *motg = container_of(w, struct msm_otg, chg_work.work); + struct usb_phy *phy = &motg->phy; + bool is_dcd, tmout, vout; + unsigned long delay; + + dev_dbg(phy->dev, "chg detection work\n"); + switch (motg->chg_state) { + case USB_CHG_STATE_UNDEFINED: + pm_runtime_get_sync(phy->dev); + msm_chg_block_on(motg); + msm_chg_enable_dcd(motg); + motg->chg_state = USB_CHG_STATE_WAIT_FOR_DCD; + motg->dcd_retries = 0; + delay = MSM_CHG_DCD_POLL_TIME; + break; + case USB_CHG_STATE_WAIT_FOR_DCD: + is_dcd = msm_chg_check_dcd(motg); + tmout = ++motg->dcd_retries == MSM_CHG_DCD_MAX_RETRIES; + if (is_dcd || tmout) { + msm_chg_disable_dcd(motg); + msm_chg_enable_primary_det(motg); + delay = MSM_CHG_PRIMARY_DET_TIME; + motg->chg_state = USB_CHG_STATE_DCD_DONE; + } else { + delay = MSM_CHG_DCD_POLL_TIME; + } + break; + case USB_CHG_STATE_DCD_DONE: + vout = msm_chg_check_primary_det(motg); + if (vout) { + msm_chg_enable_secondary_det(motg); + delay = MSM_CHG_SECONDARY_DET_TIME; + motg->chg_state = USB_CHG_STATE_PRIMARY_DONE; + } else { + motg->chg_type = USB_SDP_CHARGER; + motg->chg_state = USB_CHG_STATE_DETECTED; + delay = 0; + } + break; + case USB_CHG_STATE_PRIMARY_DONE: + vout = msm_chg_check_secondary_det(motg); + if (vout) + motg->chg_type = USB_DCP_CHARGER; + else + motg->chg_type = USB_CDP_CHARGER; + motg->chg_state = USB_CHG_STATE_SECONDARY_DONE; + /* fall through */ + case USB_CHG_STATE_SECONDARY_DONE: + motg->chg_state = USB_CHG_STATE_DETECTED; + case USB_CHG_STATE_DETECTED: + msm_chg_block_off(motg); + dev_dbg(phy->dev, "charger = %d\n", motg->chg_type); + schedule_work(&motg->sm_work); + return; + default: + return; + } + + schedule_delayed_work(&motg->chg_work, delay); +} + +/* + * We support OTG, Peripheral only and Host only configurations. In case + * of OTG, mode switch (host-->peripheral/peripheral-->host) can happen + * via Id pin status or user request (debugfs). Id/BSV interrupts are not + * enabled when switch is controlled by user and default mode is supplied + * by board file, which can be changed by userspace later. + */ +static void msm_otg_init_sm(struct msm_otg *motg) +{ + struct msm_otg_platform_data *pdata = motg->pdata; + u32 otgsc = readl(USB_OTGSC); + + switch (pdata->mode) { + case USB_OTG: + if (pdata->otg_control == OTG_PHY_CONTROL) { + if (otgsc & OTGSC_ID) + set_bit(ID, &motg->inputs); + else + clear_bit(ID, &motg->inputs); + + if (otgsc & OTGSC_BSV) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + } else if (pdata->otg_control == OTG_USER_CONTROL) { + if (pdata->default_mode == USB_HOST) { + clear_bit(ID, &motg->inputs); + } else if (pdata->default_mode == USB_PERIPHERAL) { + set_bit(ID, &motg->inputs); + set_bit(B_SESS_VLD, &motg->inputs); + } else { + set_bit(ID, &motg->inputs); + clear_bit(B_SESS_VLD, &motg->inputs); + } + } + break; + case USB_HOST: + clear_bit(ID, &motg->inputs); + break; + case USB_PERIPHERAL: + set_bit(ID, &motg->inputs); + if (otgsc & OTGSC_BSV) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + break; + default: + break; + } +} + +static void msm_otg_sm_work(struct work_struct *w) +{ + struct msm_otg *motg = container_of(w, struct msm_otg, sm_work); + struct usb_otg *otg = motg->phy.otg; + + switch (otg->phy->state) { + case OTG_STATE_UNDEFINED: + dev_dbg(otg->phy->dev, "OTG_STATE_UNDEFINED state\n"); + msm_otg_reset(otg->phy); + msm_otg_init_sm(motg); + otg->phy->state = OTG_STATE_B_IDLE; + /* FALL THROUGH */ + case OTG_STATE_B_IDLE: + dev_dbg(otg->phy->dev, "OTG_STATE_B_IDLE state\n"); + if (!test_bit(ID, &motg->inputs) && otg->host) { + /* disable BSV bit */ + writel(readl(USB_OTGSC) & ~OTGSC_BSVIE, USB_OTGSC); + msm_otg_start_host(otg->phy, 1); + otg->phy->state = OTG_STATE_A_HOST; + } else if (test_bit(B_SESS_VLD, &motg->inputs)) { + switch (motg->chg_state) { + case USB_CHG_STATE_UNDEFINED: + msm_chg_detect_work(&motg->chg_work.work); + break; + case USB_CHG_STATE_DETECTED: + switch (motg->chg_type) { + case USB_DCP_CHARGER: + msm_otg_notify_charger(motg, + IDEV_CHG_MAX); + break; + case USB_CDP_CHARGER: + msm_otg_notify_charger(motg, + IDEV_CHG_MAX); + msm_otg_start_peripheral(otg->phy, 1); + otg->phy->state + = OTG_STATE_B_PERIPHERAL; + break; + case USB_SDP_CHARGER: + msm_otg_notify_charger(motg, IUNIT); + msm_otg_start_peripheral(otg->phy, 1); + otg->phy->state + = OTG_STATE_B_PERIPHERAL; + break; + default: + break; + } + break; + default: + break; + } + } else { + /* + * If charger detection work is pending, decrement + * the pm usage counter to balance with the one that + * is incremented in charger detection work. + */ + if (cancel_delayed_work_sync(&motg->chg_work)) { + pm_runtime_put_sync(otg->phy->dev); + msm_otg_reset(otg->phy); + } + msm_otg_notify_charger(motg, 0); + motg->chg_state = USB_CHG_STATE_UNDEFINED; + motg->chg_type = USB_INVALID_CHARGER; + } + pm_runtime_put_sync(otg->phy->dev); + break; + case OTG_STATE_B_PERIPHERAL: + dev_dbg(otg->phy->dev, "OTG_STATE_B_PERIPHERAL state\n"); + if (!test_bit(B_SESS_VLD, &motg->inputs) || + !test_bit(ID, &motg->inputs)) { + msm_otg_notify_charger(motg, 0); + msm_otg_start_peripheral(otg->phy, 0); + motg->chg_state = USB_CHG_STATE_UNDEFINED; + motg->chg_type = USB_INVALID_CHARGER; + otg->phy->state = OTG_STATE_B_IDLE; + msm_otg_reset(otg->phy); + schedule_work(w); + } + break; + case OTG_STATE_A_HOST: + dev_dbg(otg->phy->dev, "OTG_STATE_A_HOST state\n"); + if (test_bit(ID, &motg->inputs)) { + msm_otg_start_host(otg->phy, 0); + otg->phy->state = OTG_STATE_B_IDLE; + msm_otg_reset(otg->phy); + schedule_work(w); + } + break; + default: + break; + } +} + +static irqreturn_t msm_otg_irq(int irq, void *data) +{ + struct msm_otg *motg = data; + struct usb_phy *phy = &motg->phy; + u32 otgsc = 0; + + if (atomic_read(&motg->in_lpm)) { + disable_irq_nosync(irq); + motg->async_int = 1; + pm_runtime_get(phy->dev); + return IRQ_HANDLED; + } + + otgsc = readl(USB_OTGSC); + if (!(otgsc & (OTGSC_IDIS | OTGSC_BSVIS))) + return IRQ_NONE; + + if ((otgsc & OTGSC_IDIS) && (otgsc & OTGSC_IDIE)) { + if (otgsc & OTGSC_ID) + set_bit(ID, &motg->inputs); + else + clear_bit(ID, &motg->inputs); + dev_dbg(phy->dev, "ID set/clear\n"); + pm_runtime_get_noresume(phy->dev); + } else if ((otgsc & OTGSC_BSVIS) && (otgsc & OTGSC_BSVIE)) { + if (otgsc & OTGSC_BSV) + set_bit(B_SESS_VLD, &motg->inputs); + else + clear_bit(B_SESS_VLD, &motg->inputs); + dev_dbg(phy->dev, "BSV set/clear\n"); + pm_runtime_get_noresume(phy->dev); + } + + writel(otgsc, USB_OTGSC); + schedule_work(&motg->sm_work); + return IRQ_HANDLED; +} + +static int msm_otg_mode_show(struct seq_file *s, void *unused) +{ + struct msm_otg *motg = s->private; + struct usb_otg *otg = motg->phy.otg; + + switch (otg->phy->state) { + case OTG_STATE_A_HOST: + seq_printf(s, "host\n"); + break; + case OTG_STATE_B_PERIPHERAL: + seq_printf(s, "peripheral\n"); + break; + default: + seq_printf(s, "none\n"); + break; + } + + return 0; +} + +static int msm_otg_mode_open(struct inode *inode, struct file *file) +{ + return single_open(file, msm_otg_mode_show, inode->i_private); +} + +static ssize_t msm_otg_mode_write(struct file *file, const char __user *ubuf, + size_t count, loff_t *ppos) +{ + struct seq_file *s = file->private_data; + struct msm_otg *motg = s->private; + char buf[16]; + struct usb_otg *otg = motg->phy.otg; + int status = count; + enum usb_mode_type req_mode; + + memset(buf, 0x00, sizeof(buf)); + + if (copy_from_user(&buf, ubuf, min_t(size_t, sizeof(buf) - 1, count))) { + status = -EFAULT; + goto out; + } + + if (!strncmp(buf, "host", 4)) { + req_mode = USB_HOST; + } else if (!strncmp(buf, "peripheral", 10)) { + req_mode = USB_PERIPHERAL; + } else if (!strncmp(buf, "none", 4)) { + req_mode = USB_NONE; + } else { + status = -EINVAL; + goto out; + } + + switch (req_mode) { + case USB_NONE: + switch (otg->phy->state) { + case OTG_STATE_A_HOST: + case OTG_STATE_B_PERIPHERAL: + set_bit(ID, &motg->inputs); + clear_bit(B_SESS_VLD, &motg->inputs); + break; + default: + goto out; + } + break; + case USB_PERIPHERAL: + switch (otg->phy->state) { + case OTG_STATE_B_IDLE: + case OTG_STATE_A_HOST: + set_bit(ID, &motg->inputs); + set_bit(B_SESS_VLD, &motg->inputs); + break; + default: + goto out; + } + break; + case USB_HOST: + switch (otg->phy->state) { + case OTG_STATE_B_IDLE: + case OTG_STATE_B_PERIPHERAL: + clear_bit(ID, &motg->inputs); + break; + default: + goto out; + } + break; + default: + goto out; + } + + pm_runtime_get_sync(otg->phy->dev); + schedule_work(&motg->sm_work); +out: + return status; +} + +const struct file_operations msm_otg_mode_fops = { + .open = msm_otg_mode_open, + .read = seq_read, + .write = msm_otg_mode_write, + .llseek = seq_lseek, + .release = single_release, +}; + +static struct dentry *msm_otg_dbg_root; +static struct dentry *msm_otg_dbg_mode; + +static int msm_otg_debugfs_init(struct msm_otg *motg) +{ + msm_otg_dbg_root = debugfs_create_dir("msm_otg", NULL); + + if (!msm_otg_dbg_root || IS_ERR(msm_otg_dbg_root)) + return -ENODEV; + + msm_otg_dbg_mode = debugfs_create_file("mode", S_IRUGO | S_IWUSR, + msm_otg_dbg_root, motg, &msm_otg_mode_fops); + if (!msm_otg_dbg_mode) { + debugfs_remove(msm_otg_dbg_root); + msm_otg_dbg_root = NULL; + return -ENODEV; + } + + return 0; +} + +static void msm_otg_debugfs_cleanup(void) +{ + debugfs_remove(msm_otg_dbg_mode); + debugfs_remove(msm_otg_dbg_root); +} + +static int __init msm_otg_probe(struct platform_device *pdev) +{ + int ret = 0; + struct resource *res; + struct msm_otg *motg; + struct usb_phy *phy; + + dev_info(&pdev->dev, "msm_otg probe\n"); + if (!pdev->dev.platform_data) { + dev_err(&pdev->dev, "No platform data given. Bailing out\n"); + return -ENODEV; + } + + motg = kzalloc(sizeof(struct msm_otg), GFP_KERNEL); + if (!motg) { + dev_err(&pdev->dev, "unable to allocate msm_otg\n"); + return -ENOMEM; + } + + motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); + if (!motg->phy.otg) { + dev_err(&pdev->dev, "unable to allocate msm_otg\n"); + return -ENOMEM; + } + + motg->pdata = pdev->dev.platform_data; + phy = &motg->phy; + phy->dev = &pdev->dev; + + motg->phy_reset_clk = clk_get(&pdev->dev, "usb_phy_clk"); + if (IS_ERR(motg->phy_reset_clk)) { + dev_err(&pdev->dev, "failed to get usb_phy_clk\n"); + ret = PTR_ERR(motg->phy_reset_clk); + goto free_motg; + } + + motg->clk = clk_get(&pdev->dev, "usb_hs_clk"); + if (IS_ERR(motg->clk)) { + dev_err(&pdev->dev, "failed to get usb_hs_clk\n"); + ret = PTR_ERR(motg->clk); + goto put_phy_reset_clk; + } + clk_set_rate(motg->clk, 60000000); + + /* + * If USB Core is running its protocol engine based on CORE CLK, + * CORE CLK must be running at >55Mhz for correct HSUSB + * operation and USB core cannot tolerate frequency changes on + * CORE CLK. For such USB cores, vote for maximum clk frequency + * on pclk source + */ + if (motg->pdata->pclk_src_name) { + motg->pclk_src = clk_get(&pdev->dev, + motg->pdata->pclk_src_name); + if (IS_ERR(motg->pclk_src)) + goto put_clk; + clk_set_rate(motg->pclk_src, INT_MAX); + clk_enable(motg->pclk_src); + } else + motg->pclk_src = ERR_PTR(-ENOENT); + + + motg->pclk = clk_get(&pdev->dev, "usb_hs_pclk"); + if (IS_ERR(motg->pclk)) { + dev_err(&pdev->dev, "failed to get usb_hs_pclk\n"); + ret = PTR_ERR(motg->pclk); + goto put_pclk_src; + } + + /* + * USB core clock is not present on all MSM chips. This + * clock is introduced to remove the dependency on AXI + * bus frequency. + */ + motg->core_clk = clk_get(&pdev->dev, "usb_hs_core_clk"); + if (IS_ERR(motg->core_clk)) + motg->core_clk = NULL; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get platform resource mem\n"); + ret = -ENODEV; + goto put_core_clk; + } + + motg->regs = ioremap(res->start, resource_size(res)); + if (!motg->regs) { + dev_err(&pdev->dev, "ioremap failed\n"); + ret = -ENOMEM; + goto put_core_clk; + } + dev_info(&pdev->dev, "OTG regs = %p\n", motg->regs); + + motg->irq = platform_get_irq(pdev, 0); + if (!motg->irq) { + dev_err(&pdev->dev, "platform_get_irq failed\n"); + ret = -ENODEV; + goto free_regs; + } + + clk_enable(motg->clk); + clk_enable(motg->pclk); + + ret = msm_hsusb_init_vddcx(motg, 1); + if (ret) { + dev_err(&pdev->dev, "hsusb vddcx configuration failed\n"); + goto free_regs; + } + + ret = msm_hsusb_ldo_init(motg, 1); + if (ret) { + dev_err(&pdev->dev, "hsusb vreg configuration failed\n"); + goto vddcx_exit; + } + ret = msm_hsusb_ldo_set_mode(1); + if (ret) { + dev_err(&pdev->dev, "hsusb vreg enable failed\n"); + goto ldo_exit; + } + + if (motg->core_clk) + clk_enable(motg->core_clk); + + writel(0, USB_USBINTR); + writel(0, USB_OTGSC); + + INIT_WORK(&motg->sm_work, msm_otg_sm_work); + INIT_DELAYED_WORK(&motg->chg_work, msm_chg_detect_work); + ret = request_irq(motg->irq, msm_otg_irq, IRQF_SHARED, + "msm_otg", motg); + if (ret) { + dev_err(&pdev->dev, "request irq failed\n"); + goto disable_clks; + } + + phy->init = msm_otg_reset; + phy->set_power = msm_otg_set_power; + + phy->io_ops = &msm_otg_io_ops; + + phy->otg->phy = &motg->phy; + phy->otg->set_host = msm_otg_set_host; + phy->otg->set_peripheral = msm_otg_set_peripheral; + + ret = usb_add_phy(&motg->phy, USB_PHY_TYPE_USB2); + if (ret) { + dev_err(&pdev->dev, "usb_add_phy failed\n"); + goto free_irq; + } + + platform_set_drvdata(pdev, motg); + device_init_wakeup(&pdev->dev, 1); + + if (motg->pdata->mode == USB_OTG && + motg->pdata->otg_control == OTG_USER_CONTROL) { + ret = msm_otg_debugfs_init(motg); + if (ret) + dev_dbg(&pdev->dev, "mode debugfs file is" + "not available\n"); + } + + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + + return 0; +free_irq: + free_irq(motg->irq, motg); +disable_clks: + clk_disable(motg->pclk); + clk_disable(motg->clk); +ldo_exit: + msm_hsusb_ldo_init(motg, 0); +vddcx_exit: + msm_hsusb_init_vddcx(motg, 0); +free_regs: + iounmap(motg->regs); +put_core_clk: + if (motg->core_clk) + clk_put(motg->core_clk); + clk_put(motg->pclk); +put_pclk_src: + if (!IS_ERR(motg->pclk_src)) { + clk_disable(motg->pclk_src); + clk_put(motg->pclk_src); + } +put_clk: + clk_put(motg->clk); +put_phy_reset_clk: + clk_put(motg->phy_reset_clk); +free_motg: + kfree(motg->phy.otg); + kfree(motg); + return ret; +} + +static int msm_otg_remove(struct platform_device *pdev) +{ + struct msm_otg *motg = platform_get_drvdata(pdev); + struct usb_phy *phy = &motg->phy; + int cnt = 0; + + if (phy->otg->host || phy->otg->gadget) + return -EBUSY; + + msm_otg_debugfs_cleanup(); + cancel_delayed_work_sync(&motg->chg_work); + cancel_work_sync(&motg->sm_work); + + pm_runtime_resume(&pdev->dev); + + device_init_wakeup(&pdev->dev, 0); + pm_runtime_disable(&pdev->dev); + + usb_remove_phy(phy); + free_irq(motg->irq, motg); + + /* + * Put PHY in low power mode. + */ + ulpi_read(phy, 0x14); + ulpi_write(phy, 0x08, 0x09); + + writel(readl(USB_PORTSC) | PORTSC_PHCD, USB_PORTSC); + while (cnt < PHY_SUSPEND_TIMEOUT_USEC) { + if (readl(USB_PORTSC) & PORTSC_PHCD) + break; + udelay(1); + cnt++; + } + if (cnt >= PHY_SUSPEND_TIMEOUT_USEC) + dev_err(phy->dev, "Unable to suspend PHY\n"); + + clk_disable(motg->pclk); + clk_disable(motg->clk); + if (motg->core_clk) + clk_disable(motg->core_clk); + if (!IS_ERR(motg->pclk_src)) { + clk_disable(motg->pclk_src); + clk_put(motg->pclk_src); + } + msm_hsusb_ldo_init(motg, 0); + + iounmap(motg->regs); + pm_runtime_set_suspended(&pdev->dev); + + clk_put(motg->phy_reset_clk); + clk_put(motg->pclk); + clk_put(motg->clk); + if (motg->core_clk) + clk_put(motg->core_clk); + + kfree(motg->phy.otg); + kfree(motg); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME +static int msm_otg_runtime_idle(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + struct usb_otg *otg = motg->phy.otg; + + dev_dbg(dev, "OTG runtime idle\n"); + + /* + * It is observed some times that a spurious interrupt + * comes when PHY is put into LPM immediately after PHY reset. + * This 1 sec delay also prevents entering into LPM immediately + * after asynchronous interrupt. + */ + if (otg->phy->state != OTG_STATE_UNDEFINED) + pm_schedule_suspend(dev, 1000); + + return -EAGAIN; +} + +static int msm_otg_runtime_suspend(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + + dev_dbg(dev, "OTG runtime suspend\n"); + return msm_otg_suspend(motg); +} + +static int msm_otg_runtime_resume(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + + dev_dbg(dev, "OTG runtime resume\n"); + return msm_otg_resume(motg); +} +#endif + +#ifdef CONFIG_PM_SLEEP +static int msm_otg_pm_suspend(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + + dev_dbg(dev, "OTG PM suspend\n"); + return msm_otg_suspend(motg); +} + +static int msm_otg_pm_resume(struct device *dev) +{ + struct msm_otg *motg = dev_get_drvdata(dev); + int ret; + + dev_dbg(dev, "OTG PM resume\n"); + + ret = msm_otg_resume(motg); + if (ret) + return ret; + + /* + * Runtime PM Documentation recommends bringing the + * device to full powered state upon resume. + */ + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + + return 0; +} +#endif + +#ifdef CONFIG_PM +static const struct dev_pm_ops msm_otg_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(msm_otg_pm_suspend, msm_otg_pm_resume) + SET_RUNTIME_PM_OPS(msm_otg_runtime_suspend, msm_otg_runtime_resume, + msm_otg_runtime_idle) +}; +#endif + +static struct platform_driver msm_otg_driver = { + .remove = msm_otg_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &msm_otg_dev_pm_ops, +#endif + }, +}; + +module_platform_driver_probe(msm_otg_driver, msm_otg_probe); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("MSM USB transceiver driver"); diff --git a/drivers/usb/phy/phy-mv-u3d-usb.c b/drivers/usb/phy/phy-mv-u3d-usb.c new file mode 100644 index 0000000..cb7e70f --- /dev/null +++ b/drivers/usb/phy/phy-mv-u3d-usb.c @@ -0,0 +1,343 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "phy-mv-u3d-usb.h" + +/* + * struct mv_u3d_phy - transceiver driver state + * @phy: transceiver structure + * @dev: The parent device supplied to the probe function + * @clk: usb phy clock + * @base: usb phy register memory base + */ +struct mv_u3d_phy { + struct usb_phy phy; + struct mv_usb_platform_data *plat; + struct device *dev; + struct clk *clk; + void __iomem *base; +}; + +static u32 mv_u3d_phy_read(void __iomem *base, u32 reg) +{ + void __iomem *addr, *data; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + return readl_relaxed(data); +} + +static void mv_u3d_phy_set(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + u32 tmp; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + tmp = readl_relaxed(data); + tmp |= value; + writel_relaxed(tmp, data); +} + +static void mv_u3d_phy_clear(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + u32 tmp; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + tmp = readl_relaxed(data); + tmp &= ~value; + writel_relaxed(tmp, data); +} + +static void mv_u3d_phy_write(void __iomem *base, u32 reg, u32 value) +{ + void __iomem *addr, *data; + + addr = base; + data = base + 0x4; + + writel_relaxed(reg, addr); + writel_relaxed(value, data); +} + +void mv_u3d_phy_shutdown(struct usb_phy *phy) +{ + struct mv_u3d_phy *mv_u3d_phy; + void __iomem *base; + u32 val; + + mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); + base = mv_u3d_phy->base; + + /* Power down Reference Analog current, bit 15 + * Power down PLL, bit 14 + * Power down Receiver, bit 13 + * Power down Transmitter, bit 12 + * of USB3_POWER_PLL_CONTROL register + */ + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_PU); + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + + if (mv_u3d_phy->clk) + clk_disable(mv_u3d_phy->clk); +} + +static int mv_u3d_phy_init(struct usb_phy *phy) +{ + struct mv_u3d_phy *mv_u3d_phy; + void __iomem *base; + u32 val, count; + + /* enable usb3 phy */ + mv_u3d_phy = container_of(phy, struct mv_u3d_phy, phy); + + if (mv_u3d_phy->clk) + clk_enable(mv_u3d_phy->clk); + + base = mv_u3d_phy->base; + + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_PU_MASK); + val |= 0xF << USB3_POWER_PLL_CONTROL_PU_SHIFT; + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + udelay(100); + + mv_u3d_phy_write(base, USB3_RESET_CONTROL, + USB3_RESET_CONTROL_RESET_PIPE); + udelay(100); + + mv_u3d_phy_write(base, USB3_RESET_CONTROL, + USB3_RESET_CONTROL_RESET_PIPE + | USB3_RESET_CONTROL_RESET_PHY); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_POWER_PLL_CONTROL); + val &= ~(USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK + | USB3_POWER_PLL_CONTROL_PHY_MODE_MASK); + val |= (USB3_PLL_25MHZ << USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT) + | (0x5 << USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT); + mv_u3d_phy_write(base, USB3_POWER_PLL_CONTROL, val); + udelay(100); + + mv_u3d_phy_clear(base, USB3_KVCO_CALI_CONTROL, + USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_SQUELCH_FFE); + val &= ~(USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK + | USB3_SQUELCH_FFE_FFE_RES_SEL_MASK + | USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK); + val |= ((0xD << USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT) + | (0x7 << USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT) + | (0x8 << USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT)); + mv_u3d_phy_write(base, USB3_SQUELCH_FFE, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN1_SET0); + val &= ~USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK; + val |= 1 << USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT; + mv_u3d_phy_write(base, USB3_GEN1_SET0, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN2_SET0); + val &= ~(USB3_GEN2_SET0_G2_TX_AMP_MASK + | USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK + | USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK); + val |= ((0x14 << USB3_GEN2_SET0_G2_TX_AMP_SHIFT) + | (1 << USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT) + | (0xA << USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT) + | (1 << USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT)); + mv_u3d_phy_write(base, USB3_GEN2_SET0, val); + udelay(100); + + mv_u3d_phy_read(base, USB3_TX_EMPPH); + val &= ~(USB3_TX_EMPPH_AMP_MASK + | USB3_TX_EMPPH_EN_MASK + | USB3_TX_EMPPH_AMP_FORCE_MASK + | USB3_TX_EMPPH_PAR1_MASK + | USB3_TX_EMPPH_PAR2_MASK); + val |= ((0xB << USB3_TX_EMPPH_AMP_SHIFT) + | (1 << USB3_TX_EMPPH_EN_SHIFT) + | (1 << USB3_TX_EMPPH_AMP_FORCE_SHIFT) + | (0x1C << USB3_TX_EMPPH_PAR1_SHIFT) + | (1 << USB3_TX_EMPPH_PAR2_SHIFT)); + + mv_u3d_phy_write(base, USB3_TX_EMPPH, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_GEN2_SET1); + val &= ~(USB3_GEN2_SET1_G2_RX_SELMUPI_MASK + | USB3_GEN2_SET1_G2_RX_SELMUPF_MASK + | USB3_GEN2_SET1_G2_RX_SELMUFI_MASK + | USB3_GEN2_SET1_G2_RX_SELMUFF_MASK); + val |= ((1 << USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT) + | (1 << USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT)); + mv_u3d_phy_write(base, USB3_GEN2_SET1, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_DIGITAL_LOOPBACK_EN); + val &= ~USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK; + val |= 1 << USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT; + mv_u3d_phy_write(base, USB3_DIGITAL_LOOPBACK_EN, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_IMPEDANCE_TX_SSC); + val &= ~USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK; + val |= 0xC << USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT; + mv_u3d_phy_write(base, USB3_IMPEDANCE_TX_SSC, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_IMPEDANCE_CALI_CTRL); + val &= ~USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK; + val |= 0x4 << USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT; + mv_u3d_phy_write(base, USB3_IMPEDANCE_CALI_CTRL, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_PHY_ISOLATION_MODE); + val &= ~(USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK + | USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK + | USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK); + val |= ((1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT) + | (1 << USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT)); + mv_u3d_phy_write(base, USB3_PHY_ISOLATION_MODE, val); + udelay(100); + + val = mv_u3d_phy_read(base, USB3_TXDETRX); + val &= ~(USB3_TXDETRX_VTHSEL_MASK); + val |= 0x1 << USB3_TXDETRX_VTHSEL_SHIFT; + mv_u3d_phy_write(base, USB3_TXDETRX, val); + udelay(100); + + dev_dbg(mv_u3d_phy->dev, "start calibration\n"); + +calstart: + /* Perform Manual Calibration */ + mv_u3d_phy_set(base, USB3_KVCO_CALI_CONTROL, + 1 << USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT); + + mdelay(1); + + count = 0; + while (1) { + val = mv_u3d_phy_read(base, USB3_KVCO_CALI_CONTROL); + if (val & (1 << USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT)) + break; + else if (count > 50) { + dev_dbg(mv_u3d_phy->dev, "calibration failure, retry...\n"); + goto calstart; + } + count++; + mdelay(1); + } + + /* active PIPE interface */ + mv_u3d_phy_write(base, USB3_PIPE_SM_CTRL, + 1 << USB3_PIPE_SM_CTRL_PHY_INIT_DONE); + + return 0; +} + +static int mv_u3d_phy_probe(struct platform_device *pdev) +{ + struct mv_u3d_phy *mv_u3d_phy; + struct mv_usb_platform_data *pdata; + struct device *dev = &pdev->dev; + struct resource *res; + void __iomem *phy_base; + int ret; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "%s: no platform data defined\n", __func__); + return -EINVAL; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(dev, "missing mem resource\n"); + return -ENODEV; + } + + phy_base = devm_ioremap_resource(dev, res); + if (IS_ERR(phy_base)) + return PTR_ERR(phy_base); + + mv_u3d_phy = devm_kzalloc(dev, sizeof(*mv_u3d_phy), GFP_KERNEL); + if (!mv_u3d_phy) + return -ENOMEM; + + mv_u3d_phy->dev = &pdev->dev; + mv_u3d_phy->plat = pdata; + mv_u3d_phy->base = phy_base; + mv_u3d_phy->phy.dev = mv_u3d_phy->dev; + mv_u3d_phy->phy.label = "mv-u3d-phy"; + mv_u3d_phy->phy.init = mv_u3d_phy_init; + mv_u3d_phy->phy.shutdown = mv_u3d_phy_shutdown; + + ret = usb_add_phy(&mv_u3d_phy->phy, USB_PHY_TYPE_USB3); + if (ret) + goto err; + + if (!mv_u3d_phy->clk) + mv_u3d_phy->clk = clk_get(mv_u3d_phy->dev, "u3dphy"); + + platform_set_drvdata(pdev, mv_u3d_phy); + + dev_info(&pdev->dev, "Initialized Marvell USB 3.0 PHY\n"); +err: + return ret; +} + +static int __exit mv_u3d_phy_remove(struct platform_device *pdev) +{ + struct mv_u3d_phy *mv_u3d_phy = platform_get_drvdata(pdev); + + usb_remove_phy(&mv_u3d_phy->phy); + + if (mv_u3d_phy->clk) { + clk_put(mv_u3d_phy->clk); + mv_u3d_phy->clk = NULL; + } + + return 0; +} + +static struct platform_driver mv_u3d_phy_driver = { + .probe = mv_u3d_phy_probe, + .remove = mv_u3d_phy_remove, + .driver = { + .name = "mv-u3d-phy", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(mv_u3d_phy_driver); +MODULE_DESCRIPTION("Marvell USB 3.0 PHY controller"); +MODULE_AUTHOR("Yu Xu "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mv-u3d-phy"); diff --git a/drivers/usb/phy/phy-mv-u3d-usb.h b/drivers/usb/phy/phy-mv-u3d-usb.h new file mode 100644 index 0000000..2a658cb --- /dev/null +++ b/drivers/usb/phy/phy-mv-u3d-usb.h @@ -0,0 +1,105 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#ifndef __MV_U3D_PHY_H +#define __MV_U3D_PHY_H + +#define USB3_POWER_PLL_CONTROL 0x1 +#define USB3_KVCO_CALI_CONTROL 0x2 +#define USB3_IMPEDANCE_CALI_CTRL 0x3 +#define USB3_IMPEDANCE_TX_SSC 0x4 +#define USB3_SQUELCH_FFE 0x6 +#define USB3_GEN1_SET0 0xD +#define USB3_GEN2_SET0 0xF +#define USB3_GEN2_SET1 0x10 +#define USB3_DIGITAL_LOOPBACK_EN 0x23 +#define USB3_PHY_ISOLATION_MODE 0x26 +#define USB3_TXDETRX 0x48 +#define USB3_TX_EMPPH 0x5E +#define USB3_RESET_CONTROL 0x90 +#define USB3_PIPE_SM_CTRL 0x91 + +#define USB3_RESET_CONTROL_RESET_PIPE 0x1 +#define USB3_RESET_CONTROL_RESET_PHY 0x2 + +#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_MASK (0x1F << 0) +#define USB3_POWER_PLL_CONTROL_REF_FREF_SEL_SHIFT 0 +#define USB3_PLL_25MHZ 0x2 +#define USB3_PLL_26MHZ 0x5 +#define USB3_POWER_PLL_CONTROL_PHY_MODE_MASK (0x7 << 5) +#define USB3_POWER_PLL_CONTROL_PHY_MODE_SHIFT 5 +#define USB3_POWER_PLL_CONTROL_PU_MASK (0xF << 12) +#define USB3_POWER_PLL_CONTROL_PU_SHIFT 12 +#define USB3_POWER_PLL_CONTROL_PU (0xF << 12) + +#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_MASK (0x1 << 12) +#define USB3_KVCO_CALI_CONTROL_USE_MAX_PLL_RATE_SHIFT 12 +#define USB3_KVCO_CALI_CONTROL_CAL_DONE_SHIFT 14 +#define USB3_KVCO_CALI_CONTROL_CAL_START_SHIFT 15 + +#define USB3_SQUELCH_FFE_FFE_CAP_SEL_MASK 0xF +#define USB3_SQUELCH_FFE_FFE_CAP_SEL_SHIFT 0 +#define USB3_SQUELCH_FFE_FFE_RES_SEL_MASK (0x7 << 4) +#define USB3_SQUELCH_FFE_FFE_RES_SEL_SHIFT 4 +#define USB3_SQUELCH_FFE_SQ_THRESH_IN_MASK (0x1F << 8) +#define USB3_SQUELCH_FFE_SQ_THRESH_IN_SHIFT 8 + +#define USB3_GEN1_SET0_G1_TX_SLEW_CTRL_EN_MASK (0x1 << 15) +#define USB3_GEN1_SET0_G1_TX_EMPH_EN_SHIFT 11 + +#define USB3_GEN2_SET0_G2_TX_AMP_MASK (0x1F << 1) +#define USB3_GEN2_SET0_G2_TX_AMP_SHIFT 1 +#define USB3_GEN2_SET0_G2_TX_AMP_ADJ_SHIFT 6 +#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_MASK (0xF << 7) +#define USB3_GEN2_SET0_G2_TX_EMPH_AMP_SHIFT 7 +#define USB3_GEN2_SET0_G2_TX_EMPH_EN_MASK (0x1 << 11) +#define USB3_GEN2_SET0_G2_TX_EMPH_EN_SHIFT 11 +#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_MASK (0x1 << 15) +#define USB3_GEN2_SET0_G2_TX_SLEW_CTRL_EN_SHIFT 15 + +#define USB3_GEN2_SET1_G2_RX_SELMUPI_MASK (0x7 << 0) +#define USB3_GEN2_SET1_G2_RX_SELMUPI_SHIFT 0 +#define USB3_GEN2_SET1_G2_RX_SELMUPF_MASK (0x7 << 3) +#define USB3_GEN2_SET1_G2_RX_SELMUPF_SHIFT 3 +#define USB3_GEN2_SET1_G2_RX_SELMUFI_MASK (0x3 << 6) +#define USB3_GEN2_SET1_G2_RX_SELMUFI_SHIFT 6 +#define USB3_GEN2_SET1_G2_RX_SELMUFF_MASK (0x3 << 8) +#define USB3_GEN2_SET1_G2_RX_SELMUFF_SHIFT 8 + +#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_MASK (0x3 << 10) +#define USB3_DIGITAL_LOOPBACK_EN_SEL_BITS_SHIFT 10 + +#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_MASK (0x7 << 12) +#define USB3_IMPEDANCE_CALI_CTRL_IMP_CAL_THR_SHIFT 12 + +#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_MASK (0x3F << 0) +#define USB3_IMPEDANCE_TX_SSC_SSC_AMP_SHIFT 0 + +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_MASK 0xF +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_RX_SHIFT 0 +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_MASK (0xF << 4) +#define USB3_PHY_ISOLATION_MODE_PHY_GEN_TX_SHIFT 4 +#define USB3_PHY_ISOLATION_MODE_TX_DRV_IDLE_MASK (0x1 << 8) + +#define USB3_TXDETRX_VTHSEL_MASK (0x3 << 4) +#define USB3_TXDETRX_VTHSEL_SHIFT 4 + +#define USB3_TX_EMPPH_AMP_MASK (0xF << 0) +#define USB3_TX_EMPPH_AMP_SHIFT 0 +#define USB3_TX_EMPPH_EN_MASK (0x1 << 6) +#define USB3_TX_EMPPH_EN_SHIFT 6 +#define USB3_TX_EMPPH_AMP_FORCE_MASK (0x1 << 7) +#define USB3_TX_EMPPH_AMP_FORCE_SHIFT 7 +#define USB3_TX_EMPPH_PAR1_MASK (0x1F << 8) +#define USB3_TX_EMPPH_PAR1_SHIFT 8 +#define USB3_TX_EMPPH_PAR2_MASK (0x1 << 13) +#define USB3_TX_EMPPH_PAR2_SHIFT 13 + +#define USB3_PIPE_SM_CTRL_PHY_INIT_DONE 15 + +#endif /* __MV_U3D_PHY_H */ diff --git a/drivers/usb/phy/phy-mv-usb.c b/drivers/usb/phy/phy-mv-usb.c new file mode 100644 index 0000000..6872bf0 --- /dev/null +++ b/drivers/usb/phy/phy-mv-usb.c @@ -0,0 +1,923 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * Author: Chao Xie + * Neil Zhang + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +#include "phy-mv-usb.h" + +#define DRIVER_DESC "Marvell USB OTG transceiver driver" +#define DRIVER_VERSION "Jan 20, 2010" + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +static const char driver_name[] = "mv-otg"; + +static char *state_string[] = { + "undefined", + "b_idle", + "b_srp_init", + "b_peripheral", + "b_wait_acon", + "b_host", + "a_idle", + "a_wait_vrise", + "a_wait_bcon", + "a_host", + "a_suspend", + "a_peripheral", + "a_wait_vfall", + "a_vbus_err" +}; + +static int mv_otg_set_vbus(struct usb_otg *otg, bool on) +{ + struct mv_otg *mvotg = container_of(otg->phy, struct mv_otg, phy); + if (mvotg->pdata->set_vbus == NULL) + return -ENODEV; + + return mvotg->pdata->set_vbus(on); +} + +static int mv_otg_set_host(struct usb_otg *otg, + struct usb_bus *host) +{ + otg->host = host; + + return 0; +} + +static int mv_otg_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + otg->gadget = gadget; + + return 0; +} + +static void mv_otg_run_state_machine(struct mv_otg *mvotg, + unsigned long delay) +{ + dev_dbg(&mvotg->pdev->dev, "transceiver is updated\n"); + if (!mvotg->qwork) + return; + + queue_delayed_work(mvotg->qwork, &mvotg->work, delay); +} + +static void mv_otg_timer_await_bcon(unsigned long data) +{ + struct mv_otg *mvotg = (struct mv_otg *) data; + + mvotg->otg_ctrl.a_wait_bcon_timeout = 1; + + dev_info(&mvotg->pdev->dev, "B Device No Response!\n"); + + if (spin_trylock(&mvotg->wq_lock)) { + mv_otg_run_state_machine(mvotg, 0); + spin_unlock(&mvotg->wq_lock); + } +} + +static int mv_otg_cancel_timer(struct mv_otg *mvotg, unsigned int id) +{ + struct timer_list *timer; + + if (id >= OTG_TIMER_NUM) + return -EINVAL; + + timer = &mvotg->otg_ctrl.timer[id]; + + if (timer_pending(timer)) + del_timer(timer); + + return 0; +} + +static int mv_otg_set_timer(struct mv_otg *mvotg, unsigned int id, + unsigned long interval, + void (*callback) (unsigned long)) +{ + struct timer_list *timer; + + if (id >= OTG_TIMER_NUM) + return -EINVAL; + + timer = &mvotg->otg_ctrl.timer[id]; + if (timer_pending(timer)) { + dev_err(&mvotg->pdev->dev, "Timer%d is already running\n", id); + return -EBUSY; + } + + init_timer(timer); + timer->data = (unsigned long) mvotg; + timer->function = callback; + timer->expires = jiffies + interval; + add_timer(timer); + + return 0; +} + +static int mv_otg_reset(struct mv_otg *mvotg) +{ + unsigned int loops; + u32 tmp; + + /* Stop the controller */ + tmp = readl(&mvotg->op_regs->usbcmd); + tmp &= ~USBCMD_RUN_STOP; + writel(tmp, &mvotg->op_regs->usbcmd); + + /* Reset the controller to get default values */ + writel(USBCMD_CTRL_RESET, &mvotg->op_regs->usbcmd); + + loops = 500; + while (readl(&mvotg->op_regs->usbcmd) & USBCMD_CTRL_RESET) { + if (loops == 0) { + dev_err(&mvotg->pdev->dev, + "Wait for RESET completed TIMEOUT\n"); + return -ETIMEDOUT; + } + loops--; + udelay(20); + } + + writel(0x0, &mvotg->op_regs->usbintr); + tmp = readl(&mvotg->op_regs->usbsts); + writel(tmp, &mvotg->op_regs->usbsts); + + return 0; +} + +static void mv_otg_init_irq(struct mv_otg *mvotg) +{ + u32 otgsc; + + mvotg->irq_en = OTGSC_INTR_A_SESSION_VALID + | OTGSC_INTR_A_VBUS_VALID; + mvotg->irq_status = OTGSC_INTSTS_A_SESSION_VALID + | OTGSC_INTSTS_A_VBUS_VALID; + + if (mvotg->pdata->vbus == NULL) { + mvotg->irq_en |= OTGSC_INTR_B_SESSION_VALID + | OTGSC_INTR_B_SESSION_END; + mvotg->irq_status |= OTGSC_INTSTS_B_SESSION_VALID + | OTGSC_INTSTS_B_SESSION_END; + } + + if (mvotg->pdata->id == NULL) { + mvotg->irq_en |= OTGSC_INTR_USB_ID; + mvotg->irq_status |= OTGSC_INTSTS_USB_ID; + } + + otgsc = readl(&mvotg->op_regs->otgsc); + otgsc |= mvotg->irq_en; + writel(otgsc, &mvotg->op_regs->otgsc); +} + +static void mv_otg_start_host(struct mv_otg *mvotg, int on) +{ +#ifdef CONFIG_USB + struct usb_otg *otg = mvotg->phy.otg; + struct usb_hcd *hcd; + + if (!otg->host) + return; + + dev_info(&mvotg->pdev->dev, "%s host\n", on ? "start" : "stop"); + + hcd = bus_to_hcd(otg->host); + + if (on) + usb_add_hcd(hcd, hcd->irq, IRQF_SHARED); + else + usb_remove_hcd(hcd); +#endif /* CONFIG_USB */ +} + +static void mv_otg_start_periphrals(struct mv_otg *mvotg, int on) +{ + struct usb_otg *otg = mvotg->phy.otg; + + if (!otg->gadget) + return; + + dev_info(mvotg->phy.dev, "gadget %s\n", on ? "on" : "off"); + + if (on) + usb_gadget_vbus_connect(otg->gadget); + else + usb_gadget_vbus_disconnect(otg->gadget); +} + +static void otg_clock_enable(struct mv_otg *mvotg) +{ + unsigned int i; + + for (i = 0; i < mvotg->clknum; i++) + clk_prepare_enable(mvotg->clk[i]); +} + +static void otg_clock_disable(struct mv_otg *mvotg) +{ + unsigned int i; + + for (i = 0; i < mvotg->clknum; i++) + clk_disable_unprepare(mvotg->clk[i]); +} + +static int mv_otg_enable_internal(struct mv_otg *mvotg) +{ + int retval = 0; + + if (mvotg->active) + return 0; + + dev_dbg(&mvotg->pdev->dev, "otg enabled\n"); + + otg_clock_enable(mvotg); + if (mvotg->pdata->phy_init) { + retval = mvotg->pdata->phy_init(mvotg->phy_regs); + if (retval) { + dev_err(&mvotg->pdev->dev, + "init phy error %d\n", retval); + otg_clock_disable(mvotg); + return retval; + } + } + mvotg->active = 1; + + return 0; + +} + +static int mv_otg_enable(struct mv_otg *mvotg) +{ + if (mvotg->clock_gating) + return mv_otg_enable_internal(mvotg); + + return 0; +} + +static void mv_otg_disable_internal(struct mv_otg *mvotg) +{ + if (mvotg->active) { + dev_dbg(&mvotg->pdev->dev, "otg disabled\n"); + if (mvotg->pdata->phy_deinit) + mvotg->pdata->phy_deinit(mvotg->phy_regs); + otg_clock_disable(mvotg); + mvotg->active = 0; + } +} + +static void mv_otg_disable(struct mv_otg *mvotg) +{ + if (mvotg->clock_gating) + mv_otg_disable_internal(mvotg); +} + +static void mv_otg_update_inputs(struct mv_otg *mvotg) +{ + struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; + u32 otgsc; + + otgsc = readl(&mvotg->op_regs->otgsc); + + if (mvotg->pdata->vbus) { + if (mvotg->pdata->vbus->poll() == VBUS_HIGH) { + otg_ctrl->b_sess_vld = 1; + otg_ctrl->b_sess_end = 0; + } else { + otg_ctrl->b_sess_vld = 0; + otg_ctrl->b_sess_end = 1; + } + } else { + otg_ctrl->b_sess_vld = !!(otgsc & OTGSC_STS_B_SESSION_VALID); + otg_ctrl->b_sess_end = !!(otgsc & OTGSC_STS_B_SESSION_END); + } + + if (mvotg->pdata->id) + otg_ctrl->id = !!mvotg->pdata->id->poll(); + else + otg_ctrl->id = !!(otgsc & OTGSC_STS_USB_ID); + + if (mvotg->pdata->otg_force_a_bus_req && !otg_ctrl->id) + otg_ctrl->a_bus_req = 1; + + otg_ctrl->a_sess_vld = !!(otgsc & OTGSC_STS_A_SESSION_VALID); + otg_ctrl->a_vbus_vld = !!(otgsc & OTGSC_STS_A_VBUS_VALID); + + dev_dbg(&mvotg->pdev->dev, "%s: ", __func__); + dev_dbg(&mvotg->pdev->dev, "id %d\n", otg_ctrl->id); + dev_dbg(&mvotg->pdev->dev, "b_sess_vld %d\n", otg_ctrl->b_sess_vld); + dev_dbg(&mvotg->pdev->dev, "b_sess_end %d\n", otg_ctrl->b_sess_end); + dev_dbg(&mvotg->pdev->dev, "a_vbus_vld %d\n", otg_ctrl->a_vbus_vld); + dev_dbg(&mvotg->pdev->dev, "a_sess_vld %d\n", otg_ctrl->a_sess_vld); +} + +static void mv_otg_update_state(struct mv_otg *mvotg) +{ + struct mv_otg_ctrl *otg_ctrl = &mvotg->otg_ctrl; + struct usb_phy *phy = &mvotg->phy; + int old_state = phy->state; + + switch (old_state) { + case OTG_STATE_UNDEFINED: + phy->state = OTG_STATE_B_IDLE; + /* FALL THROUGH */ + case OTG_STATE_B_IDLE: + if (otg_ctrl->id == 0) + phy->state = OTG_STATE_A_IDLE; + else if (otg_ctrl->b_sess_vld) + phy->state = OTG_STATE_B_PERIPHERAL; + break; + case OTG_STATE_B_PERIPHERAL: + if (!otg_ctrl->b_sess_vld || otg_ctrl->id == 0) + phy->state = OTG_STATE_B_IDLE; + break; + case OTG_STATE_A_IDLE: + if (otg_ctrl->id) + phy->state = OTG_STATE_B_IDLE; + else if (!(otg_ctrl->a_bus_drop) && + (otg_ctrl->a_bus_req || otg_ctrl->a_srp_det)) + phy->state = OTG_STATE_A_WAIT_VRISE; + break; + case OTG_STATE_A_WAIT_VRISE: + if (otg_ctrl->a_vbus_vld) + phy->state = OTG_STATE_A_WAIT_BCON; + break; + case OTG_STATE_A_WAIT_BCON: + if (otg_ctrl->id || otg_ctrl->a_bus_drop + || otg_ctrl->a_wait_bcon_timeout) { + mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); + mvotg->otg_ctrl.a_wait_bcon_timeout = 0; + phy->state = OTG_STATE_A_WAIT_VFALL; + otg_ctrl->a_bus_req = 0; + } else if (!otg_ctrl->a_vbus_vld) { + mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); + mvotg->otg_ctrl.a_wait_bcon_timeout = 0; + phy->state = OTG_STATE_A_VBUS_ERR; + } else if (otg_ctrl->b_conn) { + mv_otg_cancel_timer(mvotg, A_WAIT_BCON_TIMER); + mvotg->otg_ctrl.a_wait_bcon_timeout = 0; + phy->state = OTG_STATE_A_HOST; + } + break; + case OTG_STATE_A_HOST: + if (otg_ctrl->id || !otg_ctrl->b_conn + || otg_ctrl->a_bus_drop) + phy->state = OTG_STATE_A_WAIT_BCON; + else if (!otg_ctrl->a_vbus_vld) + phy->state = OTG_STATE_A_VBUS_ERR; + break; + case OTG_STATE_A_WAIT_VFALL: + if (otg_ctrl->id + || (!otg_ctrl->b_conn && otg_ctrl->a_sess_vld) + || otg_ctrl->a_bus_req) + phy->state = OTG_STATE_A_IDLE; + break; + case OTG_STATE_A_VBUS_ERR: + if (otg_ctrl->id || otg_ctrl->a_clr_err + || otg_ctrl->a_bus_drop) { + otg_ctrl->a_clr_err = 0; + phy->state = OTG_STATE_A_WAIT_VFALL; + } + break; + default: + break; + } +} + +static void mv_otg_work(struct work_struct *work) +{ + struct mv_otg *mvotg; + struct usb_phy *phy; + struct usb_otg *otg; + int old_state; + + mvotg = container_of(to_delayed_work(work), struct mv_otg, work); + +run: + /* work queue is single thread, or we need spin_lock to protect */ + phy = &mvotg->phy; + otg = phy->otg; + old_state = phy->state; + + if (!mvotg->active) + return; + + mv_otg_update_inputs(mvotg); + mv_otg_update_state(mvotg); + + if (old_state != phy->state) { + dev_info(&mvotg->pdev->dev, "change from state %s to %s\n", + state_string[old_state], + state_string[phy->state]); + + switch (phy->state) { + case OTG_STATE_B_IDLE: + otg->default_a = 0; + if (old_state == OTG_STATE_B_PERIPHERAL) + mv_otg_start_periphrals(mvotg, 0); + mv_otg_reset(mvotg); + mv_otg_disable(mvotg); + break; + case OTG_STATE_B_PERIPHERAL: + mv_otg_enable(mvotg); + mv_otg_start_periphrals(mvotg, 1); + break; + case OTG_STATE_A_IDLE: + otg->default_a = 1; + mv_otg_enable(mvotg); + if (old_state == OTG_STATE_A_WAIT_VFALL) + mv_otg_start_host(mvotg, 0); + mv_otg_reset(mvotg); + break; + case OTG_STATE_A_WAIT_VRISE: + mv_otg_set_vbus(otg, 1); + break; + case OTG_STATE_A_WAIT_BCON: + if (old_state != OTG_STATE_A_HOST) + mv_otg_start_host(mvotg, 1); + mv_otg_set_timer(mvotg, A_WAIT_BCON_TIMER, + T_A_WAIT_BCON, + mv_otg_timer_await_bcon); + /* + * Now, we directly enter A_HOST. So set b_conn = 1 + * here. In fact, it need host driver to notify us. + */ + mvotg->otg_ctrl.b_conn = 1; + break; + case OTG_STATE_A_HOST: + break; + case OTG_STATE_A_WAIT_VFALL: + /* + * Now, we has exited A_HOST. So set b_conn = 0 + * here. In fact, it need host driver to notify us. + */ + mvotg->otg_ctrl.b_conn = 0; + mv_otg_set_vbus(otg, 0); + break; + case OTG_STATE_A_VBUS_ERR: + break; + default: + break; + } + goto run; + } +} + +static irqreturn_t mv_otg_irq(int irq, void *dev) +{ + struct mv_otg *mvotg = dev; + u32 otgsc; + + otgsc = readl(&mvotg->op_regs->otgsc); + writel(otgsc, &mvotg->op_regs->otgsc); + + /* + * if we have vbus, then the vbus detection for B-device + * will be done by mv_otg_inputs_irq(). + */ + if (mvotg->pdata->vbus) + if ((otgsc & OTGSC_STS_USB_ID) && + !(otgsc & OTGSC_INTSTS_USB_ID)) + return IRQ_NONE; + + if ((otgsc & mvotg->irq_status) == 0) + return IRQ_NONE; + + mv_otg_run_state_machine(mvotg, 0); + + return IRQ_HANDLED; +} + +static irqreturn_t mv_otg_inputs_irq(int irq, void *dev) +{ + struct mv_otg *mvotg = dev; + + /* The clock may disabled at this time */ + if (!mvotg->active) { + mv_otg_enable(mvotg); + mv_otg_init_irq(mvotg); + } + + mv_otg_run_state_machine(mvotg, 0); + + return IRQ_HANDLED; +} + +static ssize_t +get_a_bus_req(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct mv_otg *mvotg = dev_get_drvdata(dev); + return scnprintf(buf, PAGE_SIZE, "%d\n", + mvotg->otg_ctrl.a_bus_req); +} + +static ssize_t +set_a_bus_req(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mv_otg *mvotg = dev_get_drvdata(dev); + + if (count > 2) + return -1; + + /* We will use this interface to change to A device */ + if (mvotg->phy.state != OTG_STATE_B_IDLE + && mvotg->phy.state != OTG_STATE_A_IDLE) + return -1; + + /* The clock may disabled and we need to set irq for ID detected */ + mv_otg_enable(mvotg); + mv_otg_init_irq(mvotg); + + if (buf[0] == '1') { + mvotg->otg_ctrl.a_bus_req = 1; + mvotg->otg_ctrl.a_bus_drop = 0; + dev_dbg(&mvotg->pdev->dev, + "User request: a_bus_req = 1\n"); + + if (spin_trylock(&mvotg->wq_lock)) { + mv_otg_run_state_machine(mvotg, 0); + spin_unlock(&mvotg->wq_lock); + } + } + + return count; +} + +static DEVICE_ATTR(a_bus_req, S_IRUGO | S_IWUSR, get_a_bus_req, + set_a_bus_req); + +static ssize_t +set_a_clr_err(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mv_otg *mvotg = dev_get_drvdata(dev); + if (!mvotg->phy.otg->default_a) + return -1; + + if (count > 2) + return -1; + + if (buf[0] == '1') { + mvotg->otg_ctrl.a_clr_err = 1; + dev_dbg(&mvotg->pdev->dev, + "User request: a_clr_err = 1\n"); + } + + if (spin_trylock(&mvotg->wq_lock)) { + mv_otg_run_state_machine(mvotg, 0); + spin_unlock(&mvotg->wq_lock); + } + + return count; +} + +static DEVICE_ATTR(a_clr_err, S_IWUSR, NULL, set_a_clr_err); + +static ssize_t +get_a_bus_drop(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mv_otg *mvotg = dev_get_drvdata(dev); + return scnprintf(buf, PAGE_SIZE, "%d\n", + mvotg->otg_ctrl.a_bus_drop); +} + +static ssize_t +set_a_bus_drop(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct mv_otg *mvotg = dev_get_drvdata(dev); + if (!mvotg->phy.otg->default_a) + return -1; + + if (count > 2) + return -1; + + if (buf[0] == '0') { + mvotg->otg_ctrl.a_bus_drop = 0; + dev_dbg(&mvotg->pdev->dev, + "User request: a_bus_drop = 0\n"); + } else if (buf[0] == '1') { + mvotg->otg_ctrl.a_bus_drop = 1; + mvotg->otg_ctrl.a_bus_req = 0; + dev_dbg(&mvotg->pdev->dev, + "User request: a_bus_drop = 1\n"); + dev_dbg(&mvotg->pdev->dev, + "User request: and a_bus_req = 0\n"); + } + + if (spin_trylock(&mvotg->wq_lock)) { + mv_otg_run_state_machine(mvotg, 0); + spin_unlock(&mvotg->wq_lock); + } + + return count; +} + +static DEVICE_ATTR(a_bus_drop, S_IRUGO | S_IWUSR, + get_a_bus_drop, set_a_bus_drop); + +static struct attribute *inputs_attrs[] = { + &dev_attr_a_bus_req.attr, + &dev_attr_a_clr_err.attr, + &dev_attr_a_bus_drop.attr, + NULL, +}; + +static struct attribute_group inputs_attr_group = { + .name = "inputs", + .attrs = inputs_attrs, +}; + +int mv_otg_remove(struct platform_device *pdev) +{ + struct mv_otg *mvotg = platform_get_drvdata(pdev); + + sysfs_remove_group(&mvotg->pdev->dev.kobj, &inputs_attr_group); + + if (mvotg->qwork) { + flush_workqueue(mvotg->qwork); + destroy_workqueue(mvotg->qwork); + } + + mv_otg_disable(mvotg); + + usb_remove_phy(&mvotg->phy); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static int mv_otg_probe(struct platform_device *pdev) +{ + struct mv_usb_platform_data *pdata = pdev->dev.platform_data; + struct mv_otg *mvotg; + struct usb_otg *otg; + struct resource *r; + int retval = 0, clk_i, i; + size_t size; + + if (pdata == NULL) { + dev_err(&pdev->dev, "failed to get platform data\n"); + return -ENODEV; + } + + size = sizeof(*mvotg) + sizeof(struct clk *) * pdata->clknum; + mvotg = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + if (!mvotg) { + dev_err(&pdev->dev, "failed to allocate memory!\n"); + return -ENOMEM; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + platform_set_drvdata(pdev, mvotg); + + mvotg->pdev = pdev; + mvotg->pdata = pdata; + + mvotg->clknum = pdata->clknum; + for (clk_i = 0; clk_i < mvotg->clknum; clk_i++) { + mvotg->clk[clk_i] = devm_clk_get(&pdev->dev, + pdata->clkname[clk_i]); + if (IS_ERR(mvotg->clk[clk_i])) { + retval = PTR_ERR(mvotg->clk[clk_i]); + return retval; + } + } + + mvotg->qwork = create_singlethread_workqueue("mv_otg_queue"); + if (!mvotg->qwork) { + dev_dbg(&pdev->dev, "cannot create workqueue for OTG\n"); + return -ENOMEM; + } + + INIT_DELAYED_WORK(&mvotg->work, mv_otg_work); + + /* OTG common part */ + mvotg->pdev = pdev; + mvotg->phy.dev = &pdev->dev; + mvotg->phy.otg = otg; + mvotg->phy.label = driver_name; + mvotg->phy.state = OTG_STATE_UNDEFINED; + + otg->phy = &mvotg->phy; + otg->set_host = mv_otg_set_host; + otg->set_peripheral = mv_otg_set_peripheral; + otg->set_vbus = mv_otg_set_vbus; + + for (i = 0; i < OTG_TIMER_NUM; i++) + init_timer(&mvotg->otg_ctrl.timer[i]); + + r = platform_get_resource_byname(mvotg->pdev, + IORESOURCE_MEM, "phyregs"); + if (r == NULL) { + dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); + retval = -ENODEV; + goto err_destroy_workqueue; + } + + mvotg->phy_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (mvotg->phy_regs == NULL) { + dev_err(&pdev->dev, "failed to map phy I/O memory\n"); + retval = -EFAULT; + goto err_destroy_workqueue; + } + + r = platform_get_resource_byname(mvotg->pdev, + IORESOURCE_MEM, "capregs"); + if (r == NULL) { + dev_err(&pdev->dev, "no I/O memory resource defined\n"); + retval = -ENODEV; + goto err_destroy_workqueue; + } + + mvotg->cap_regs = devm_ioremap(&pdev->dev, r->start, resource_size(r)); + if (mvotg->cap_regs == NULL) { + dev_err(&pdev->dev, "failed to map I/O memory\n"); + retval = -EFAULT; + goto err_destroy_workqueue; + } + + /* we will acces controller register, so enable the udc controller */ + retval = mv_otg_enable_internal(mvotg); + if (retval) { + dev_err(&pdev->dev, "mv otg enable error %d\n", retval); + goto err_destroy_workqueue; + } + + mvotg->op_regs = + (struct mv_otg_regs __iomem *) ((unsigned long) mvotg->cap_regs + + (readl(mvotg->cap_regs) & CAPLENGTH_MASK)); + + if (pdata->id) { + retval = devm_request_threaded_irq(&pdev->dev, pdata->id->irq, + NULL, mv_otg_inputs_irq, + IRQF_ONESHOT, "id", mvotg); + if (retval) { + dev_info(&pdev->dev, + "Failed to request irq for ID\n"); + pdata->id = NULL; + } + } + + if (pdata->vbus) { + mvotg->clock_gating = 1; + retval = devm_request_threaded_irq(&pdev->dev, pdata->vbus->irq, + NULL, mv_otg_inputs_irq, + IRQF_ONESHOT, "vbus", mvotg); + if (retval) { + dev_info(&pdev->dev, + "Failed to request irq for VBUS, " + "disable clock gating\n"); + mvotg->clock_gating = 0; + pdata->vbus = NULL; + } + } + + if (pdata->disable_otg_clock_gating) + mvotg->clock_gating = 0; + + mv_otg_reset(mvotg); + mv_otg_init_irq(mvotg); + + r = platform_get_resource(mvotg->pdev, IORESOURCE_IRQ, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no IRQ resource defined\n"); + retval = -ENODEV; + goto err_disable_clk; + } + + mvotg->irq = r->start; + if (devm_request_irq(&pdev->dev, mvotg->irq, mv_otg_irq, IRQF_SHARED, + driver_name, mvotg)) { + dev_err(&pdev->dev, "Request irq %d for OTG failed\n", + mvotg->irq); + mvotg->irq = 0; + retval = -ENODEV; + goto err_disable_clk; + } + + retval = usb_add_phy(&mvotg->phy, USB_PHY_TYPE_USB2); + if (retval < 0) { + dev_err(&pdev->dev, "can't register transceiver, %d\n", + retval); + goto err_disable_clk; + } + + retval = sysfs_create_group(&pdev->dev.kobj, &inputs_attr_group); + if (retval < 0) { + dev_dbg(&pdev->dev, + "Can't register sysfs attr group: %d\n", retval); + goto err_remove_phy; + } + + spin_lock_init(&mvotg->wq_lock); + if (spin_trylock(&mvotg->wq_lock)) { + mv_otg_run_state_machine(mvotg, 2 * HZ); + spin_unlock(&mvotg->wq_lock); + } + + dev_info(&pdev->dev, + "successful probe OTG device %s clock gating.\n", + mvotg->clock_gating ? "with" : "without"); + + return 0; + +err_remove_phy: + usb_remove_phy(&mvotg->phy); +err_disable_clk: + mv_otg_disable_internal(mvotg); +err_destroy_workqueue: + flush_workqueue(mvotg->qwork); + destroy_workqueue(mvotg->qwork); + + platform_set_drvdata(pdev, NULL); + + return retval; +} + +#ifdef CONFIG_PM +static int mv_otg_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mv_otg *mvotg = platform_get_drvdata(pdev); + + if (mvotg->phy.state != OTG_STATE_B_IDLE) { + dev_info(&pdev->dev, + "OTG state is not B_IDLE, it is %d!\n", + mvotg->phy.state); + return -EAGAIN; + } + + if (!mvotg->clock_gating) + mv_otg_disable_internal(mvotg); + + return 0; +} + +static int mv_otg_resume(struct platform_device *pdev) +{ + struct mv_otg *mvotg = platform_get_drvdata(pdev); + u32 otgsc; + + if (!mvotg->clock_gating) { + mv_otg_enable_internal(mvotg); + + otgsc = readl(&mvotg->op_regs->otgsc); + otgsc |= mvotg->irq_en; + writel(otgsc, &mvotg->op_regs->otgsc); + + if (spin_trylock(&mvotg->wq_lock)) { + mv_otg_run_state_machine(mvotg, 0); + spin_unlock(&mvotg->wq_lock); + } + } + return 0; +} +#endif + +static struct platform_driver mv_otg_driver = { + .probe = mv_otg_probe, + .remove = __exit_p(mv_otg_remove), + .driver = { + .owner = THIS_MODULE, + .name = driver_name, + }, +#ifdef CONFIG_PM + .suspend = mv_otg_suspend, + .resume = mv_otg_resume, +#endif +}; +module_platform_driver(mv_otg_driver); diff --git a/drivers/usb/phy/phy-mv-usb.h b/drivers/usb/phy/phy-mv-usb.h new file mode 100644 index 0000000..8a9e351 --- /dev/null +++ b/drivers/usb/phy/phy-mv-usb.h @@ -0,0 +1,165 @@ +/* + * Copyright (C) 2011 Marvell International Ltd. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MV_USB_OTG_CONTROLLER__ +#define __MV_USB_OTG_CONTROLLER__ + +#include + +/* Command Register Bit Masks */ +#define USBCMD_RUN_STOP (0x00000001) +#define USBCMD_CTRL_RESET (0x00000002) + +/* otgsc Register Bit Masks */ +#define OTGSC_CTRL_VUSB_DISCHARGE 0x00000001 +#define OTGSC_CTRL_VUSB_CHARGE 0x00000002 +#define OTGSC_CTRL_OTG_TERM 0x00000008 +#define OTGSC_CTRL_DATA_PULSING 0x00000010 +#define OTGSC_STS_USB_ID 0x00000100 +#define OTGSC_STS_A_VBUS_VALID 0x00000200 +#define OTGSC_STS_A_SESSION_VALID 0x00000400 +#define OTGSC_STS_B_SESSION_VALID 0x00000800 +#define OTGSC_STS_B_SESSION_END 0x00001000 +#define OTGSC_STS_1MS_TOGGLE 0x00002000 +#define OTGSC_STS_DATA_PULSING 0x00004000 +#define OTGSC_INTSTS_USB_ID 0x00010000 +#define OTGSC_INTSTS_A_VBUS_VALID 0x00020000 +#define OTGSC_INTSTS_A_SESSION_VALID 0x00040000 +#define OTGSC_INTSTS_B_SESSION_VALID 0x00080000 +#define OTGSC_INTSTS_B_SESSION_END 0x00100000 +#define OTGSC_INTSTS_1MS 0x00200000 +#define OTGSC_INTSTS_DATA_PULSING 0x00400000 +#define OTGSC_INTR_USB_ID 0x01000000 +#define OTGSC_INTR_A_VBUS_VALID 0x02000000 +#define OTGSC_INTR_A_SESSION_VALID 0x04000000 +#define OTGSC_INTR_B_SESSION_VALID 0x08000000 +#define OTGSC_INTR_B_SESSION_END 0x10000000 +#define OTGSC_INTR_1MS_TIMER 0x20000000 +#define OTGSC_INTR_DATA_PULSING 0x40000000 + +#define CAPLENGTH_MASK (0xff) + +/* Timer's interval, unit 10ms */ +#define T_A_WAIT_VRISE 100 +#define T_A_WAIT_BCON 2000 +#define T_A_AIDL_BDIS 100 +#define T_A_BIDL_ADIS 20 +#define T_B_ASE0_BRST 400 +#define T_B_SE0_SRP 300 +#define T_B_SRP_FAIL 2000 +#define T_B_DATA_PLS 10 +#define T_B_SRP_INIT 100 +#define T_A_SRP_RSPNS 10 +#define T_A_DRV_RSM 5 + +enum otg_function { + OTG_B_DEVICE = 0, + OTG_A_DEVICE +}; + +enum mv_otg_timer { + A_WAIT_BCON_TIMER = 0, + OTG_TIMER_NUM +}; + +/* PXA OTG state machine */ +struct mv_otg_ctrl { + /* internal variables */ + u8 a_set_b_hnp_en; /* A-Device set b_hnp_en */ + u8 b_srp_done; + u8 b_hnp_en; + + /* OTG inputs */ + u8 a_bus_drop; + u8 a_bus_req; + u8 a_clr_err; + u8 a_bus_resume; + u8 a_bus_suspend; + u8 a_conn; + u8 a_sess_vld; + u8 a_srp_det; + u8 a_vbus_vld; + u8 b_bus_req; /* B-Device Require Bus */ + u8 b_bus_resume; + u8 b_bus_suspend; + u8 b_conn; + u8 b_se0_srp; + u8 b_sess_end; + u8 b_sess_vld; + u8 id; + u8 a_suspend_req; + + /*Timer event */ + u8 a_aidl_bdis_timeout; + u8 b_ase0_brst_timeout; + u8 a_bidl_adis_timeout; + u8 a_wait_bcon_timeout; + + struct timer_list timer[OTG_TIMER_NUM]; +}; + +#define VUSBHS_MAX_PORTS 8 + +struct mv_otg_regs { + u32 usbcmd; /* Command register */ + u32 usbsts; /* Status register */ + u32 usbintr; /* Interrupt enable */ + u32 frindex; /* Frame index */ + u32 reserved1[1]; + u32 deviceaddr; /* Device Address */ + u32 eplistaddr; /* Endpoint List Address */ + u32 ttctrl; /* HOST TT status and control */ + u32 burstsize; /* Programmable Burst Size */ + u32 txfilltuning; /* Host Transmit Pre-Buffer Packet Tuning */ + u32 reserved[4]; + u32 epnak; /* Endpoint NAK */ + u32 epnaken; /* Endpoint NAK Enable */ + u32 configflag; /* Configured Flag register */ + u32 portsc[VUSBHS_MAX_PORTS]; /* Port Status/Control x, x = 1..8 */ + u32 otgsc; + u32 usbmode; /* USB Host/Device mode */ + u32 epsetupstat; /* Endpoint Setup Status */ + u32 epprime; /* Endpoint Initialize */ + u32 epflush; /* Endpoint De-initialize */ + u32 epstatus; /* Endpoint Status */ + u32 epcomplete; /* Endpoint Interrupt On Complete */ + u32 epctrlx[16]; /* Endpoint Control, where x = 0.. 15 */ + u32 mcr; /* Mux Control */ + u32 isr; /* Interrupt Status */ + u32 ier; /* Interrupt Enable */ +}; + +struct mv_otg { + struct usb_phy phy; + struct mv_otg_ctrl otg_ctrl; + + /* base address */ + void __iomem *phy_regs; + void __iomem *cap_regs; + struct mv_otg_regs __iomem *op_regs; + + struct platform_device *pdev; + int irq; + u32 irq_status; + u32 irq_en; + + struct delayed_work work; + struct workqueue_struct *qwork; + + spinlock_t wq_lock; + + struct mv_usb_platform_data *pdata; + + unsigned int active; + unsigned int clock_gating; + unsigned int clknum; + struct clk *clk[0]; +}; + +#endif diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c new file mode 100644 index 0000000..9d4381e --- /dev/null +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -0,0 +1,220 @@ +/* + * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright (C) 2012 Marek Vasut + * on behalf of DENX Software Engineering GmbH + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRIVER_NAME "mxs_phy" + +#define HW_USBPHY_PWD 0x00 +#define HW_USBPHY_CTRL 0x30 +#define HW_USBPHY_CTRL_SET 0x34 +#define HW_USBPHY_CTRL_CLR 0x38 + +#define BM_USBPHY_CTRL_SFTRST BIT(31) +#define BM_USBPHY_CTRL_CLKGATE BIT(30) +#define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) +#define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) +#define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) + +struct mxs_phy { + struct usb_phy phy; + struct clk *clk; +}; + +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +static void mxs_phy_hw_init(struct mxs_phy *mxs_phy) +{ + void __iomem *base = mxs_phy->phy.io_priv; + + stmp_reset_block(base + HW_USBPHY_CTRL); + + /* Power up the PHY */ + writel(0, base + HW_USBPHY_PWD); + + /* enable FS/LS device */ + writel(BM_USBPHY_CTRL_ENUTMILEVEL2 | + BM_USBPHY_CTRL_ENUTMILEVEL3, + base + HW_USBPHY_CTRL_SET); +} + +static int mxs_phy_init(struct usb_phy *phy) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + + clk_prepare_enable(mxs_phy->clk); + mxs_phy_hw_init(mxs_phy); + + return 0; +} + +static void mxs_phy_shutdown(struct usb_phy *phy) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(phy); + + writel(BM_USBPHY_CTRL_CLKGATE, + phy->io_priv + HW_USBPHY_CTRL_SET); + + clk_disable_unprepare(mxs_phy->clk); +} + +static int mxs_phy_suspend(struct usb_phy *x, int suspend) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(x); + + if (suspend) { + writel(0xffffffff, x->io_priv + HW_USBPHY_PWD); + writel(BM_USBPHY_CTRL_CLKGATE, + x->io_priv + HW_USBPHY_CTRL_SET); + clk_disable_unprepare(mxs_phy->clk); + } else { + clk_prepare_enable(mxs_phy->clk); + writel(BM_USBPHY_CTRL_CLKGATE, + x->io_priv + HW_USBPHY_CTRL_CLR); + writel(0, x->io_priv + HW_USBPHY_PWD); + } + + return 0; +} + +static int mxs_phy_on_connect(struct usb_phy *phy, + enum usb_device_speed speed) +{ + dev_dbg(phy->dev, "%s speed device has connected\n", + (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + + if (speed == USB_SPEED_HIGH) + writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_SET); + + return 0; +} + +static int mxs_phy_on_disconnect(struct usb_phy *phy, + enum usb_device_speed speed) +{ + dev_dbg(phy->dev, "%s speed device has disconnected\n", + (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + + if (speed == USB_SPEED_HIGH) + writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, + phy->io_priv + HW_USBPHY_CTRL_CLR); + + return 0; +} + +static int mxs_phy_probe(struct platform_device *pdev) +{ + struct resource *res; + void __iomem *base; + struct clk *clk; + struct mxs_phy *mxs_phy; + int ret; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "can't get device resources\n"); + return -ENOENT; + } + + base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(base)) + return PTR_ERR(base); + + clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, + "can't get the clock, err=%ld", PTR_ERR(clk)); + return PTR_ERR(clk); + } + + mxs_phy = devm_kzalloc(&pdev->dev, sizeof(*mxs_phy), GFP_KERNEL); + if (!mxs_phy) { + dev_err(&pdev->dev, "Failed to allocate USB PHY structure!\n"); + return -ENOMEM; + } + + mxs_phy->phy.io_priv = base; + mxs_phy->phy.dev = &pdev->dev; + mxs_phy->phy.label = DRIVER_NAME; + mxs_phy->phy.init = mxs_phy_init; + mxs_phy->phy.shutdown = mxs_phy_shutdown; + mxs_phy->phy.set_suspend = mxs_phy_suspend; + mxs_phy->phy.notify_connect = mxs_phy_on_connect; + mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; + + ATOMIC_INIT_NOTIFIER_HEAD(&mxs_phy->phy.notifier); + + mxs_phy->clk = clk; + + platform_set_drvdata(pdev, &mxs_phy->phy); + + ret = usb_add_phy_dev(&mxs_phy->phy); + if (ret) + return ret; + + return 0; +} + +static int mxs_phy_remove(struct platform_device *pdev) +{ + struct mxs_phy *mxs_phy = platform_get_drvdata(pdev); + + usb_remove_phy(&mxs_phy->phy); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx23-usbphy", }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + +static struct platform_driver mxs_phy_driver = { + .probe = mxs_phy_probe, + .remove = mxs_phy_remove, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + .of_match_table = mxs_phy_dt_ids, + }, +}; + +static int __init mxs_phy_module_init(void) +{ + return platform_driver_register(&mxs_phy_driver); +} +postcore_initcall(mxs_phy_module_init); + +static void __exit mxs_phy_module_exit(void) +{ + platform_driver_unregister(&mxs_phy_driver); +} +module_exit(mxs_phy_module_exit); + +MODULE_ALIAS("platform:mxs-usb-phy"); +MODULE_AUTHOR("Marek Vasut "); +MODULE_AUTHOR("Richard Zhao "); +MODULE_DESCRIPTION("Freescale MXS USB PHY driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-nop.c b/drivers/usb/phy/phy-nop.c new file mode 100644 index 0000000..2b10cc9 --- /dev/null +++ b/drivers/usb/phy/phy-nop.c @@ -0,0 +1,294 @@ +/* + * drivers/usb/otg/nop-usb-xceiv.c + * + * NOP USB transceiver for all USB transceiver which are either built-in + * into USB IP or which are mostly autonomous. + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Ajay Kumar Gupta + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * This provides a "nop" transceiver for PHYs which are + * autonomous such as isp1504, isp1707, etc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct nop_usb_xceiv { + struct usb_phy phy; + struct device *dev; + struct clk *clk; + struct regulator *vcc; + struct regulator *reset; +}; + +static struct platform_device *pd; + +void usb_nop_xceiv_register(void) +{ + if (pd) + return; + pd = platform_device_register_simple("nop_usb_xceiv", -1, NULL, 0); + if (!pd) { + printk(KERN_ERR "Unable to register usb nop transceiver\n"); + return; + } +} +EXPORT_SYMBOL(usb_nop_xceiv_register); + +void usb_nop_xceiv_unregister(void) +{ + platform_device_unregister(pd); + pd = NULL; +} +EXPORT_SYMBOL(usb_nop_xceiv_unregister); + +static int nop_set_suspend(struct usb_phy *x, int suspend) +{ + return 0; +} + +static int nop_init(struct usb_phy *phy) +{ + struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); + + if (!IS_ERR(nop->vcc)) { + if (regulator_enable(nop->vcc)) + dev_err(phy->dev, "Failed to enable power\n"); + } + + if (!IS_ERR(nop->clk)) + clk_enable(nop->clk); + + if (!IS_ERR(nop->reset)) { + /* De-assert RESET */ + if (regulator_enable(nop->reset)) + dev_err(phy->dev, "Failed to de-assert reset\n"); + } + + return 0; +} + +static void nop_shutdown(struct usb_phy *phy) +{ + struct nop_usb_xceiv *nop = dev_get_drvdata(phy->dev); + + if (!IS_ERR(nop->reset)) { + /* Assert RESET */ + if (regulator_disable(nop->reset)) + dev_err(phy->dev, "Failed to assert reset\n"); + } + + if (!IS_ERR(nop->clk)) + clk_disable(nop->clk); + + if (!IS_ERR(nop->vcc)) { + if (regulator_disable(nop->vcc)) + dev_err(phy->dev, "Failed to disable power\n"); + } +} + +static int nop_set_peripheral(struct usb_otg *otg, struct usb_gadget *gadget) +{ + if (!otg) + return -ENODEV; + + if (!gadget) { + otg->gadget = NULL; + return -ENODEV; + } + + otg->gadget = gadget; + otg->phy->state = OTG_STATE_B_IDLE; + return 0; +} + +static int nop_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + if (!host) { + otg->host = NULL; + return -ENODEV; + } + + otg->host = host; + return 0; +} + +static int nop_usb_xceiv_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct nop_usb_xceiv_platform_data *pdata = pdev->dev.platform_data; + struct nop_usb_xceiv *nop; + enum usb_phy_type type = USB_PHY_TYPE_USB2; + int err; + u32 clk_rate = 0; + bool needs_vcc = false; + bool needs_reset = false; + + nop = devm_kzalloc(&pdev->dev, sizeof(*nop), GFP_KERNEL); + if (!nop) + return -ENOMEM; + + nop->phy.otg = devm_kzalloc(&pdev->dev, sizeof(*nop->phy.otg), + GFP_KERNEL); + if (!nop->phy.otg) + return -ENOMEM; + + if (dev->of_node) { + struct device_node *node = dev->of_node; + + if (of_property_read_u32(node, "clock-frequency", &clk_rate)) + clk_rate = 0; + + needs_vcc = of_property_read_bool(node, "vcc-supply"); + needs_reset = of_property_read_bool(node, "reset-supply"); + + } else if (pdata) { + type = pdata->type; + clk_rate = pdata->clk_rate; + needs_vcc = pdata->needs_vcc; + needs_reset = pdata->needs_reset; + } + + nop->clk = devm_clk_get(&pdev->dev, "main_clk"); + if (IS_ERR(nop->clk)) { + dev_dbg(&pdev->dev, "Can't get phy clock: %ld\n", + PTR_ERR(nop->clk)); + } + + if (!IS_ERR(nop->clk) && clk_rate) { + err = clk_set_rate(nop->clk, clk_rate); + if (err) { + dev_err(&pdev->dev, "Error setting clock rate\n"); + return err; + } + } + + if (!IS_ERR(nop->clk)) { + err = clk_prepare(nop->clk); + if (err) { + dev_err(&pdev->dev, "Error preparing clock\n"); + return err; + } + } + + nop->vcc = devm_regulator_get(&pdev->dev, "vcc"); + if (IS_ERR(nop->vcc)) { + dev_dbg(&pdev->dev, "Error getting vcc regulator: %ld\n", + PTR_ERR(nop->vcc)); + if (needs_vcc) + return -EPROBE_DEFER; + } + + nop->reset = devm_regulator_get(&pdev->dev, "reset"); + if (IS_ERR(nop->reset)) { + dev_dbg(&pdev->dev, "Error getting reset regulator: %ld\n", + PTR_ERR(nop->reset)); + if (needs_reset) + return -EPROBE_DEFER; + } + + nop->dev = &pdev->dev; + nop->phy.dev = nop->dev; + nop->phy.label = "nop-xceiv"; + nop->phy.set_suspend = nop_set_suspend; + nop->phy.init = nop_init; + nop->phy.shutdown = nop_shutdown; + nop->phy.state = OTG_STATE_UNDEFINED; + nop->phy.type = type; + + nop->phy.otg->phy = &nop->phy; + nop->phy.otg->set_host = nop_set_host; + nop->phy.otg->set_peripheral = nop_set_peripheral; + + err = usb_add_phy_dev(&nop->phy); + if (err) { + dev_err(&pdev->dev, "can't register transceiver, err: %d\n", + err); + goto err_add; + } + + platform_set_drvdata(pdev, nop); + + ATOMIC_INIT_NOTIFIER_HEAD(&nop->phy.notifier); + + return 0; + +err_add: + if (!IS_ERR(nop->clk)) + clk_unprepare(nop->clk); + return err; +} + +static int nop_usb_xceiv_remove(struct platform_device *pdev) +{ + struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); + + if (!IS_ERR(nop->clk)) + clk_unprepare(nop->clk); + + usb_remove_phy(&nop->phy); + + platform_set_drvdata(pdev, NULL); + + return 0; +} + +static const struct of_device_id nop_xceiv_dt_ids[] = { + { .compatible = "usb-nop-xceiv" }, + { } +}; + +MODULE_DEVICE_TABLE(of, nop_xceiv_dt_ids); + +static struct platform_driver nop_usb_xceiv_driver = { + .probe = nop_usb_xceiv_probe, + .remove = nop_usb_xceiv_remove, + .driver = { + .name = "nop_usb_xceiv", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(nop_xceiv_dt_ids), + }, +}; + +static int __init nop_usb_xceiv_init(void) +{ + return platform_driver_register(&nop_usb_xceiv_driver); +} +subsys_initcall(nop_usb_xceiv_init); + +static void __exit nop_usb_xceiv_exit(void) +{ + platform_driver_unregister(&nop_usb_xceiv_driver); +} +module_exit(nop_usb_xceiv_exit); + +MODULE_ALIAS("platform:nop_usb_xceiv"); +MODULE_AUTHOR("Texas Instruments Inc"); +MODULE_DESCRIPTION("NOP USB Transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/usb/phy/phy-omap-control.c new file mode 100644 index 0000000..1419ced --- /dev/null +++ b/drivers/usb/phy/phy-omap-control.c @@ -0,0 +1,289 @@ +/* + * omap-control-usb.c - The USB part of control module. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static struct omap_control_usb *control_usb; + +/** + * omap_get_control_dev - returns the device pointer for this control device + * + * This API should be called to get the device pointer for this control + * module device. This device pointer should be used for called other + * exported API's in this driver. + * + * To be used by PHY driver and glue driver. + */ +struct device *omap_get_control_dev(void) +{ + if (!control_usb) + return ERR_PTR(-ENODEV); + + return control_usb->dev; +} +EXPORT_SYMBOL_GPL(omap_get_control_dev); + +/** + * omap_control_usb3_phy_power - power on/off the serializer using control + * module + * @dev: the control module device + * @on: 0 to off and 1 to on based on powering on or off the PHY + * + * usb3 PHY driver should call this API to power on or off the PHY. + */ +void omap_control_usb3_phy_power(struct device *dev, bool on) +{ + u32 val; + unsigned long rate; + struct omap_control_usb *control_usb = dev_get_drvdata(dev); + + if (control_usb->type != OMAP_CTRL_DEV_TYPE2) + return; + + rate = clk_get_rate(control_usb->sys_clk); + rate = rate/1000000; + + val = readl(control_usb->phy_power); + + if (on) { + val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; + } else { + val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + } + + writel(val, control_usb->phy_power); +} +EXPORT_SYMBOL_GPL(omap_control_usb3_phy_power); + +/** + * omap_control_usb_phy_power - power on/off the phy using control module reg + * @dev: the control module device + * @on: 0 or 1, based on powering on or off the PHY + */ +void omap_control_usb_phy_power(struct device *dev, int on) +{ + u32 val; + struct omap_control_usb *control_usb = dev_get_drvdata(dev); + + val = readl(control_usb->dev_conf); + + if (on) + val &= ~OMAP_CTRL_DEV_PHY_PD; + else + val |= OMAP_CTRL_DEV_PHY_PD; + + writel(val, control_usb->dev_conf); +} +EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); + +/** + * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded + * @ctrl_usb: struct omap_control_usb * + * + * Writes to the mailbox register to notify the usb core that a usb + * device has been connected. + */ +static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) +{ + u32 val; + + val = readl(ctrl_usb->otghs_control); + val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); + val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_usb->otghs_control); +} + +/** + * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high + * impedance + * @ctrl_usb: struct omap_control_usb * + * + * Writes to the mailbox register to notify the usb core that it has been + * connected to a usb host. + */ +static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) +{ + u32 val; + + val = readl(ctrl_usb->otghs_control); + val &= ~OMAP_CTRL_DEV_SESSEND; + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | + OMAP_CTRL_DEV_VBUSVALID; + writel(val, ctrl_usb->otghs_control); +} + +/** + * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high + * impedance + * @ctrl_usb: struct omap_control_usb * + * + * Writes to the mailbox register to notify the usb core it's now in + * disconnected state. + */ +static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) +{ + u32 val; + + val = readl(ctrl_usb->otghs_control); + val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); + val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; + writel(val, ctrl_usb->otghs_control); +} + +/** + * omap_control_usb_set_mode - Calls to functions to set USB in one of host mode + * or device mode or to denote disconnected state + * @dev: the control module device + * @mode: The mode to which usb should be configured + * + * This is an API to write to the mailbox register to notify the usb core that + * a usb device has been connected. + */ +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode) +{ + struct omap_control_usb *ctrl_usb; + + if (IS_ERR(dev) || control_usb->type != OMAP_CTRL_DEV_TYPE1) + return; + + ctrl_usb = dev_get_drvdata(dev); + + switch (mode) { + case USB_MODE_HOST: + omap_control_usb_host_mode(ctrl_usb); + break; + case USB_MODE_DEVICE: + omap_control_usb_device_mode(ctrl_usb); + break; + case USB_MODE_DISCONNECT: + omap_control_usb_set_sessionend(ctrl_usb); + break; + default: + dev_vdbg(dev, "invalid omap control usb mode\n"); + } +} +EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); + +static int omap_control_usb_probe(struct platform_device *pdev) +{ + struct resource *res; + struct device_node *np = pdev->dev.of_node; + struct omap_control_usb_platform_data *pdata = pdev->dev.platform_data; + + control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), + GFP_KERNEL); + if (!control_usb) { + dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); + return -ENOMEM; + } + + if (np) { + of_property_read_u32(np, "ti,type", &control_usb->type); + } else if (pdata) { + control_usb->type = pdata->type; + } else { + dev_err(&pdev->dev, "no pdata present\n"); + return -EINVAL; + } + + control_usb->dev = &pdev->dev; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "control_dev_conf"); + control_usb->dev_conf = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_usb->dev_conf)) + return PTR_ERR(control_usb->dev_conf); + + if (control_usb->type == OMAP_CTRL_DEV_TYPE1) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "otghs_control"); + control_usb->otghs_control = devm_ioremap_resource( + &pdev->dev, res); + if (IS_ERR(control_usb->otghs_control)) + return PTR_ERR(control_usb->otghs_control); + } + + if (control_usb->type == OMAP_CTRL_DEV_TYPE2) { + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "phy_power_usb"); + control_usb->phy_power = devm_ioremap_resource( + &pdev->dev, res); + if (IS_ERR(control_usb->phy_power)) + return PTR_ERR(control_usb->phy_power); + + control_usb->sys_clk = devm_clk_get(control_usb->dev, + "sys_clkin"); + if (IS_ERR(control_usb->sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + } + + + dev_set_drvdata(control_usb->dev, control_usb); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id omap_control_usb_id_table[] = { + { .compatible = "ti,omap-control-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); +#endif + +static struct platform_driver omap_control_usb_driver = { + .probe = omap_control_usb_probe, + .driver = { + .name = "omap-control-usb", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(omap_control_usb_id_table), + }, +}; + +static int __init omap_control_usb_init(void) +{ + return platform_driver_register(&omap_control_usb_driver); +} +subsys_initcall(omap_control_usb_init); + +static void __exit omap_control_usb_exit(void) +{ + platform_driver_unregister(&omap_control_usb_driver); +} +module_exit(omap_control_usb_exit); + +MODULE_ALIAS("platform: omap_control_usb"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP Control Module USB Driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/phy-omap-usb2.c b/drivers/usb/phy/phy-omap-usb2.c new file mode 100644 index 0000000..844ab68 --- /dev/null +++ b/drivers/usb/phy/phy-omap-usb2.c @@ -0,0 +1,273 @@ +/* + * omap-usb2.c - USB PHY, talking to musb controller in OMAP. + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/** + * omap_usb2_set_comparator - links the comparator present in the sytem with + * this phy + * @comparator - the companion phy(comparator) for this phy + * + * The phy companion driver should call this API passing the phy_companion + * filled with set_vbus and start_srp to be used by usb phy. + * + * For use by phy companion driver + */ +int omap_usb2_set_comparator(struct phy_companion *comparator) +{ + struct omap_usb *phy; + struct usb_phy *x = usb_get_phy(USB_PHY_TYPE_USB2); + + if (IS_ERR(x)) + return -ENODEV; + + phy = phy_to_omapusb(x); + phy->comparator = comparator; + return 0; +} +EXPORT_SYMBOL_GPL(omap_usb2_set_comparator); + +static int omap_usb_set_vbus(struct usb_otg *otg, bool enabled) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->set_vbus(phy->comparator, enabled); +} + +static int omap_usb_start_srp(struct usb_otg *otg) +{ + struct omap_usb *phy = phy_to_omapusb(otg->phy); + + if (!phy->comparator) + return -ENODEV; + + return phy->comparator->start_srp(phy->comparator); +} + +static int omap_usb_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct usb_phy *phy = otg->phy; + + otg->host = host; + if (!host) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + struct usb_phy *phy = otg->phy; + + otg->gadget = gadget; + if (!gadget) + phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int omap_usb2_suspend(struct usb_phy *x, int suspend) +{ + u32 ret; + struct omap_usb *phy = phy_to_omapusb(x); + + if (suspend && !phy->is_suspended) { + omap_control_usb_phy_power(phy->control_dev, 0); + pm_runtime_put_sync(phy->dev); + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + ret = pm_runtime_get_sync(phy->dev); + if (ret < 0) { + dev_err(phy->dev, "get_sync failed with err %d\n", + ret); + return ret; + } + omap_control_usb_phy_power(phy->control_dev, 1); + phy->is_suspended = 0; + } + + return 0; +} + +static int omap_usb2_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct usb_otg *otg; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); + return -ENOMEM; + } + + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); + if (!otg) { + dev_err(&pdev->dev, "unable to allocate memory for USB OTG\n"); + return -ENOMEM; + } + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb2"; + phy->phy.set_suspend = omap_usb2_suspend; + phy->phy.otg = otg; + phy->phy.type = USB_PHY_TYPE_USB2; + + phy->control_dev = omap_get_control_dev(); + if (IS_ERR(phy->control_dev)) { + dev_dbg(&pdev->dev, "Failed to get control device\n"); + return -ENODEV; + } + + phy->is_suspended = 1; + omap_control_usb_phy_power(phy->control_dev, 0); + + otg->set_host = omap_usb_set_host; + otg->set_peripheral = omap_usb_set_peripheral; + otg->set_vbus = omap_usb_set_vbus; + otg->start_srp = omap_usb_start_srp; + otg->phy = &phy->phy; + + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) + dev_vdbg(&pdev->dev, "unable to get refclk960m\n"); + else + clk_prepare(phy->optclk); + + usb_add_phy_dev(&phy->phy); + + platform_set_drvdata(pdev, phy); + + pm_runtime_enable(phy->dev); + + return 0; +} + +static int omap_usb2_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_unprepare(phy->optclk); + usb_remove_phy(&phy->phy); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb2_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + if (!IS_ERR(phy->optclk)) + clk_disable(phy->optclk); + + return 0; +} + +static int omap_usb2_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + ret = clk_enable(phy->wkupclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err0; + } + + if (!IS_ERR(phy->optclk)) { + ret = clk_enable(phy->optclk); + if (ret < 0) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + } + + return 0; + +err1: + clk_disable(phy->wkupclk); + +err0: + return ret; +} + +static const struct dev_pm_ops omap_usb2_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb2_runtime_suspend, omap_usb2_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb2_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb2_id_table[] = { + { .compatible = "ti,omap-usb2" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb2_id_table); +#endif + +static struct platform_driver omap_usb2_driver = { + .probe = omap_usb2_probe, + .remove = omap_usb2_remove, + .driver = { + .name = "omap-usb2", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb2_id_table), + }, +}; + +module_platform_driver(omap_usb2_driver); + +MODULE_ALIAS("platform: omap_usb2"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB2 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c new file mode 100644 index 0000000..a6e60b1 --- /dev/null +++ b/drivers/usb/phy/phy-omap-usb3.c @@ -0,0 +1,353 @@ +/* + * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define NUM_SYS_CLKS 5 +#define PLL_STATUS 0x00000004 +#define PLL_GO 0x00000008 +#define PLL_CONFIGURATION1 0x0000000C +#define PLL_CONFIGURATION2 0x00000010 +#define PLL_CONFIGURATION3 0x00000014 +#define PLL_CONFIGURATION4 0x00000020 + +#define PLL_REGM_MASK 0x001FFE00 +#define PLL_REGM_SHIFT 0x9 +#define PLL_REGM_F_MASK 0x0003FFFF +#define PLL_REGM_F_SHIFT 0x0 +#define PLL_REGN_MASK 0x000001FE +#define PLL_REGN_SHIFT 0x1 +#define PLL_SELFREQDCO_MASK 0x0000000E +#define PLL_SELFREQDCO_SHIFT 0x1 +#define PLL_SD_MASK 0x0003FC00 +#define PLL_SD_SHIFT 0x9 +#define SET_PLL_GO 0x1 +#define PLL_TICOPWDN 0x10000 +#define PLL_LOCK 0x2 +#define PLL_IDLE 0x1 + +/* + * This is an Empirical value that works, need to confirm the actual + * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status + * to be correctly reflected in the USB3PHY_PLL_STATUS register. + */ +# define PLL_IDLE_TIME 100; + +enum sys_clk_rate { + CLK_RATE_UNDEFINED = -1, + CLK_RATE_12MHZ, + CLK_RATE_16MHZ, + CLK_RATE_19MHZ, + CLK_RATE_26MHZ, + CLK_RATE_38MHZ +}; + +static struct usb_dpll_params omap_usb3_dpll_params[NUM_SYS_CLKS] = { + {1250, 5, 4, 20, 0}, /* 12 MHz */ + {3125, 20, 4, 20, 0}, /* 16.8 MHz */ + {1172, 8, 4, 20, 65537}, /* 19.2 MHz */ + {1250, 12, 4, 20, 0}, /* 26 MHz */ + {3125, 47, 4, 20, 92843}, /* 38.4 MHz */ +}; + +static int omap_usb3_suspend(struct usb_phy *x, int suspend) +{ + struct omap_usb *phy = phy_to_omapusb(x); + int val; + int timeout = PLL_IDLE_TIME; + + if (suspend && !phy->is_suspended) { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val |= PLL_IDLE; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_TICOPWDN) + break; + udelay(1); + } while (--timeout); + + omap_control_usb3_phy_power(phy->control_dev, 0); + + phy->is_suspended = 1; + } else if (!suspend && phy->is_suspended) { + phy->is_suspended = 0; + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_IDLE; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (!(val & PLL_TICOPWDN)) + break; + udelay(1); + } while (--timeout); + } + + return 0; +} + +static inline enum sys_clk_rate __get_sys_clk_index(unsigned long rate) +{ + switch (rate) { + case 12000000: + return CLK_RATE_12MHZ; + case 16800000: + return CLK_RATE_16MHZ; + case 19200000: + return CLK_RATE_19MHZ; + case 26000000: + return CLK_RATE_26MHZ; + case 38400000: + return CLK_RATE_38MHZ; + default: + return CLK_RATE_UNDEFINED; + } +} + +static void omap_usb_dpll_relock(struct omap_usb *phy) +{ + u32 val; + unsigned long timeout; + + omap_usb_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); + + timeout = jiffies + msecs_to_jiffies(20); + do { + val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_LOCK) + break; + } while (!WARN_ON(time_after(jiffies, timeout))); +} + +static int omap_usb_dpll_lock(struct omap_usb *phy) +{ + u32 val; + unsigned long rate; + enum sys_clk_rate clk_index; + + rate = clk_get_rate(phy->sys_clk); + clk_index = __get_sys_clk_index(rate); + + if (clk_index == CLK_RATE_UNDEFINED) { + pr_err("dpll cannot be locked for sys clk freq:%luHz\n", rate); + return -EINVAL; + } + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGN_MASK; + val |= omap_usb3_dpll_params[clk_index].n << PLL_REGN_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_SELFREQDCO_MASK; + val |= omap_usb3_dpll_params[clk_index].freq << PLL_SELFREQDCO_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGM_MASK; + val |= omap_usb3_dpll_params[clk_index].m << PLL_REGM_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); + val &= ~PLL_REGM_F_MASK; + val |= omap_usb3_dpll_params[clk_index].mf << PLL_REGM_F_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); + + val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); + val &= ~PLL_SD_MASK; + val |= omap_usb3_dpll_params[clk_index].sd << PLL_SD_SHIFT; + omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); + + omap_usb_dpll_relock(phy); + + return 0; +} + +static int omap_usb3_init(struct usb_phy *x) +{ + struct omap_usb *phy = phy_to_omapusb(x); + + omap_usb_dpll_lock(phy); + omap_control_usb3_phy_power(phy->control_dev, 1); + + return 0; +} + +static int omap_usb3_probe(struct platform_device *pdev) +{ + struct omap_usb *phy; + struct resource *res; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to alloc mem for OMAP USB3 PHY\n"); + return -ENOMEM; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); + phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(phy->pll_ctrl_base)) + return PTR_ERR(phy->pll_ctrl_base); + + phy->dev = &pdev->dev; + + phy->phy.dev = phy->dev; + phy->phy.label = "omap-usb3"; + phy->phy.init = omap_usb3_init; + phy->phy.set_suspend = omap_usb3_suspend; + phy->phy.type = USB_PHY_TYPE_USB3; + + phy->is_suspended = 1; + phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); + return PTR_ERR(phy->wkupclk); + } + clk_prepare(phy->wkupclk); + + phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); + if (IS_ERR(phy->optclk)) { + dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n"); + return PTR_ERR(phy->optclk); + } + clk_prepare(phy->optclk); + + phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin"); + if (IS_ERR(phy->sys_clk)) { + pr_err("%s: unable to get sys_clkin\n", __func__); + return -EINVAL; + } + + phy->control_dev = omap_get_control_dev(); + if (IS_ERR(phy->control_dev)) { + dev_dbg(&pdev->dev, "Failed to get control device\n"); + return -ENODEV; + } + + omap_control_usb3_phy_power(phy->control_dev, 0); + usb_add_phy_dev(&phy->phy); + + platform_set_drvdata(pdev, phy); + + pm_runtime_enable(phy->dev); + pm_runtime_get(&pdev->dev); + + return 0; +} + +static int omap_usb3_remove(struct platform_device *pdev) +{ + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_unprepare(phy->wkupclk); + clk_unprepare(phy->optclk); + usb_remove_phy(&phy->phy); + if (!pm_runtime_suspended(&pdev->dev)) + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int omap_usb3_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + clk_disable(phy->wkupclk); + clk_disable(phy->optclk); + + return 0; +} + +static int omap_usb3_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct platform_device *pdev = to_platform_device(dev); + struct omap_usb *phy = platform_get_drvdata(pdev); + + ret = clk_enable(phy->optclk); + if (ret) { + dev_err(phy->dev, "Failed to enable optclk %d\n", ret); + goto err1; + } + + ret = clk_enable(phy->wkupclk); + if (ret) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err2; + } + + return 0; + +err2: + clk_disable(phy->optclk); + +err1: + return ret; +} + +static const struct dev_pm_ops omap_usb3_pm_ops = { + SET_RUNTIME_PM_OPS(omap_usb3_runtime_suspend, omap_usb3_runtime_resume, + NULL) +}; + +#define DEV_PM_OPS (&omap_usb3_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id omap_usb3_id_table[] = { + { .compatible = "ti,omap-usb3" }, + {} +}; +MODULE_DEVICE_TABLE(of, omap_usb3_id_table); +#endif + +static struct platform_driver omap_usb3_driver = { + .probe = omap_usb3_probe, + .remove = omap_usb3_remove, + .driver = { + .name = "omap-usb3", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(omap_usb3_id_table), + }, +}; + +module_platform_driver(omap_usb3_driver); + +MODULE_ALIAS("platform: omap_usb3"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("OMAP USB3 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/phy-rcar-usb.c b/drivers/usb/phy/phy-rcar-usb.c new file mode 100644 index 0000000..a35681b --- /dev/null +++ b/drivers/usb/phy/phy-rcar-usb.c @@ -0,0 +1,220 @@ +/* + * Renesas R-Car USB phy driver + * + * Copyright (C) 2012 Renesas Solutions Corp. + * Kuninori Morimoto + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include + +/* USBH common register */ +#define USBPCTRL0 0x0800 +#define USBPCTRL1 0x0804 +#define USBST 0x0808 +#define USBEH0 0x080C +#define USBOH0 0x081C +#define USBCTL0 0x0858 +#define EIIBC1 0x0094 +#define EIIBC2 0x009C + +/* USBPCTRL1 */ +#define PHY_RST (1 << 2) +#define PLL_ENB (1 << 1) +#define PHY_ENB (1 << 0) + +/* USBST */ +#define ST_ACT (1 << 31) +#define ST_PLL (1 << 30) + +struct rcar_usb_phy_priv { + struct usb_phy phy; + spinlock_t lock; + + void __iomem *reg0; + void __iomem *reg1; + int counter; +}; + +#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy) + + +/* + * USB initial/install operation. + * + * This function setup USB phy. + * The used value and setting order came from + * [USB :: Initial setting] on datasheet. + */ +static int rcar_usb_phy_init(struct usb_phy *phy) +{ + struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); + struct device *dev = phy->dev; + void __iomem *reg0 = priv->reg0; + void __iomem *reg1 = priv->reg1; + int i; + u32 val; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + if (priv->counter++ == 0) { + + /* + * USB phy start-up + */ + + /* (1) USB-PHY standby release */ + iowrite32(PHY_ENB, (reg0 + USBPCTRL1)); + + /* (2) start USB-PHY internal PLL */ + iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1)); + + /* (3) USB module status check */ + for (i = 0; i < 1024; i++) { + udelay(10); + val = ioread32(reg0 + USBST); + if (val == (ST_ACT | ST_PLL)) + break; + } + + if (val != (ST_ACT | ST_PLL)) { + dev_err(dev, "USB phy not ready\n"); + goto phy_init_end; + } + + /* (4) USB-PHY reset clear */ + iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1)); + + /* set platform specific port settings */ + iowrite32(0x00000000, (reg0 + USBPCTRL0)); + + /* + * EHCI IP internal buffer setting + * EHCI IP internal buffer enable + * + * These are recommended value of a datasheet + * see [USB :: EHCI internal buffer setting] + */ + iowrite32(0x00ff0040, (reg0 + EIIBC1)); + iowrite32(0x00ff0040, (reg1 + EIIBC1)); + + iowrite32(0x00000001, (reg0 + EIIBC2)); + iowrite32(0x00000001, (reg1 + EIIBC2)); + + /* + * Bus alignment settings + */ + + /* (1) EHCI bus alignment (little endian) */ + iowrite32(0x00000000, (reg0 + USBEH0)); + + /* (1) OHCI bus alignment (little endian) */ + iowrite32(0x00000000, (reg0 + USBOH0)); + } + +phy_init_end: + spin_unlock_irqrestore(&priv->lock, flags); + + return 0; +} + +static void rcar_usb_phy_shutdown(struct usb_phy *phy) +{ + struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); + void __iomem *reg0 = priv->reg0; + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + + if (priv->counter-- == 1) { /* last user */ + iowrite32(0x00000000, (reg0 + USBPCTRL0)); + iowrite32(0x00000000, (reg0 + USBPCTRL1)); + } + + spin_unlock_irqrestore(&priv->lock, flags); +} + +static int rcar_usb_phy_probe(struct platform_device *pdev) +{ + struct rcar_usb_phy_priv *priv; + struct resource *res0, *res1; + struct device *dev = &pdev->dev; + void __iomem *reg0, *reg1; + int ret; + + res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); + res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!res0 || !res1) { + dev_err(dev, "Not enough platform resources\n"); + return -EINVAL; + } + + /* + * CAUTION + * + * Because this phy address is also mapped under OHCI/EHCI address area, + * this driver can't use devm_request_and_ioremap(dev, res) here + */ + reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); + reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1)); + if (!reg0 || !reg1) { + dev_err(dev, "ioremap error\n"); + return -ENOMEM; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) { + dev_err(dev, "priv data allocation error\n"); + return -ENOMEM; + } + + priv->reg0 = reg0; + priv->reg1 = reg1; + priv->counter = 0; + priv->phy.dev = dev; + priv->phy.label = dev_name(dev); + priv->phy.init = rcar_usb_phy_init; + priv->phy.shutdown = rcar_usb_phy_shutdown; + spin_lock_init(&priv->lock); + + ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2); + if (ret < 0) { + dev_err(dev, "usb phy addition error\n"); + return ret; + } + + platform_set_drvdata(pdev, priv); + + return ret; +} + +static int rcar_usb_phy_remove(struct platform_device *pdev) +{ + struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev); + + usb_remove_phy(&priv->phy); + + return 0; +} + +static struct platform_driver rcar_usb_phy_driver = { + .driver = { + .name = "rcar_usb_phy", + }, + .probe = rcar_usb_phy_probe, + .remove = rcar_usb_phy_remove, +}; + +module_platform_driver(rcar_usb_phy_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Renesas R-Car USB phy"); +MODULE_AUTHOR("Kuninori Morimoto "); diff --git a/drivers/usb/phy/phy-samsung-usb.c b/drivers/usb/phy/phy-samsung-usb.c new file mode 100644 index 0000000..967101e --- /dev/null +++ b/drivers/usb/phy/phy-samsung-usb.c @@ -0,0 +1,928 @@ +/* linux/drivers/usb/phy/samsung-usbphy.c + * + * Copyright (c) 2012 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Author: Praveen Paneri + * + * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and + * OHCI-EXYNOS controllers. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register definitions */ + +#define SAMSUNG_PHYPWR (0x00) + +#define PHYPWR_NORMAL_MASK (0x19 << 0) +#define PHYPWR_OTG_DISABLE (0x1 << 4) +#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) +#define PHYPWR_FORCE_SUSPEND (0x1 << 1) +/* For Exynos4 */ +#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) +#define PHYPWR_SLEEP_PHY0 (0x1 << 5) + +#define SAMSUNG_PHYCLK (0x04) + +#define PHYCLK_MODE_USB11 (0x1 << 6) +#define PHYCLK_EXT_OSC (0x1 << 5) +#define PHYCLK_COMMON_ON_N (0x1 << 4) +#define PHYCLK_ID_PULL (0x1 << 2) +#define PHYCLK_CLKSEL_MASK (0x3 << 0) +#define PHYCLK_CLKSEL_48M (0x0 << 0) +#define PHYCLK_CLKSEL_12M (0x2 << 0) +#define PHYCLK_CLKSEL_24M (0x3 << 0) + +#define SAMSUNG_RSTCON (0x08) + +#define RSTCON_PHYLINK_SWRST (0x1 << 2) +#define RSTCON_HLINK_SWRST (0x1 << 1) +#define RSTCON_SWRST (0x1 << 0) + +/* EXYNOS5 */ +#define EXYNOS5_PHY_HOST_CTRL0 (0x00) + +#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) + +#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) +#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) +#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) +#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) + +#define HOST_CTRL0_FSEL_MASK (0x7 << 16) +#define HOST_CTRL0_FSEL(_x) ((_x) << 16) + +#define FSEL_CLKSEL_50M (0x7) +#define FSEL_CLKSEL_24M (0x5) +#define FSEL_CLKSEL_20M (0x4) +#define FSEL_CLKSEL_19200K (0x3) +#define FSEL_CLKSEL_12M (0x2) +#define FSEL_CLKSEL_10M (0x1) +#define FSEL_CLKSEL_9600K (0x0) + +#define HOST_CTRL0_TESTBURNIN (0x1 << 11) +#define HOST_CTRL0_RETENABLE (0x1 << 10) +#define HOST_CTRL0_COMMONON_N (0x1 << 9) +#define HOST_CTRL0_SIDDQ (0x1 << 6) +#define HOST_CTRL0_FORCESLEEP (0x1 << 5) +#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) +#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) +#define HOST_CTRL0_UTMISWRST (0x1 << 2) +#define HOST_CTRL0_LINKSWRST (0x1 << 1) +#define HOST_CTRL0_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_TUNE0 (0x04) + +#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) + +#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) + +#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) + +#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) + +#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) +#define HSIC_CTRL_REFCLKSEL (0x2 << 23) + +#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) +#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) +#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) +#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) +#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) +#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) +#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) + +#define HSIC_CTRL_SIDDQ (0x1 << 6) +#define HSIC_CTRL_FORCESLEEP (0x1 << 5) +#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) +#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) +#define HSIC_CTRL_UTMISWRST (0x1 << 2) +#define HSIC_CTRL_PHYSWRST (0x1 << 0) + +#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) + +#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) +#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) +#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) +#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) + +#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) + +#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) +#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) +#define HOST_OHCICTRL_CNTSEL (0x1 << 1) +#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) + +#define EXYNOS5_PHY_OTG_SYS (0x38) + +#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) +#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) +#define OTG_SYS_PHY0_SWRST (0x1 << 12) + +#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) +#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) +#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) +#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) + +#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) +#define OTG_SYS_COMMON_ON (0x1 << 7) + +#define OTG_SYS_FSEL_MASK (0x7 << 4) +#define OTG_SYS_FSEL(_x) ((_x) << 4) + +#define OTG_SYS_FORCESLEEP (0x1 << 3) +#define OTG_SYS_OTGDISABLE (0x1 << 2) +#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) +#define OTG_SYS_FORCESUSPEND (0x1 << 0) + +#define EXYNOS5_PHY_OTG_TUNE (0x40) + +#ifndef MHZ +#define MHZ (1000*1000) +#endif + +#ifndef KHZ +#define KHZ (1000) +#endif + +#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) +#define S3C64XX_USBPHY_ENABLE (0x1 << 16) +#define EXYNOS_USBPHY_ENABLE (0x1 << 0) +#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) + +enum samsung_cpu_type { + TYPE_S3C64XX, + TYPE_EXYNOS4210, + TYPE_EXYNOS5250, +}; + +/* + * struct samsung_usbphy_drvdata - driver data for various SoC variants + * @cpu_type: machine identifier + * @devphy_en_mask: device phy enable mask for PHY CONTROL register + * @hostphy_en_mask: host phy enable mask for PHY CONTROL register + * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from + * mapped address of system controller. + * @hostphy_reg_offset: offset to HOST PHY CONTROL register from + * mapped address of system controller. + * + * Here we have a separate mask for device type phy. + * Having different masks for host and device type phy helps + * in setting independent masks in case of SoCs like S5PV210, + * in which PHY0 and PHY1 enable bits belong to same register + * placed at position 0 and 1 respectively. + * Although for newer SoCs like exynos these bits belong to + * different registers altogether placed at position 0. + */ +struct samsung_usbphy_drvdata { + int cpu_type; + int devphy_en_mask; + int hostphy_en_mask; + u32 devphy_reg_offset; + u32 hostphy_reg_offset; +}; + +/* + * struct samsung_usbphy - transceiver driver state + * @phy: transceiver structure + * @plat: platform data + * @dev: The parent device supplied to the probe function + * @clk: usb phy clock + * @regs: usb phy controller registers memory base + * @pmuregs: USB device PHY_CONTROL register memory base + * @sysreg: USB2.0 PHY_CFG register memory base + * @ref_clk_freq: reference clock frequency selection + * @drv_data: driver data available for different SoCs + * @phy_type: Samsung SoCs specific phy types: #HOST + * #DEVICE + * @phy_usage: usage count for phy + * @lock: lock for phy operations + */ +struct samsung_usbphy { + struct usb_phy phy; + struct samsung_usbphy_data *plat; + struct device *dev; + struct clk *clk; + void __iomem *regs; + void __iomem *pmuregs; + void __iomem *sysreg; + int ref_clk_freq; + const struct samsung_usbphy_drvdata *drv_data; + enum samsung_usb_phy_type phy_type; + atomic_t phy_usage; + spinlock_t lock; +}; + +#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) + +int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + if (!otg->host) + otg->host = host; + + return 0; +} + +static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) +{ + struct device_node *usbphy_sys; + + /* Getting node for system controller interface for usb-phy */ + usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); + if (!usbphy_sys) { + dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); + return -ENODEV; + } + + sphy->pmuregs = of_iomap(usbphy_sys, 0); + + if (sphy->pmuregs == NULL) { + dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); + goto err0; + } + + sphy->sysreg = of_iomap(usbphy_sys, 1); + + /* + * Not returning error code here, since this situation is not fatal. + * Few SoCs may not have this switch available + */ + if (sphy->sysreg == NULL) + dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); + + of_node_put(usbphy_sys); + + return 0; + +err0: + of_node_put(usbphy_sys); + return -ENXIO; +} + +/* + * Set isolation here for phy. + * Here 'on = true' would mean USB PHY block is isolated, hence + * de-activated and vice-versa. + */ +static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) +{ + void __iomem *reg = NULL; + u32 reg_val; + u32 en_mask = 0; + + if (!sphy->pmuregs) { + dev_warn(sphy->dev, "Can't set pmu isolation\n"); + return; + } + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + /* + * Do nothing: We will add here once S3C64xx goes for DT support + */ + break; + case TYPE_EXYNOS4210: + /* + * Fall through since exynos4210 and exynos5250 have similar + * register architecture: two separate registers for host and + * device phy control with enable bit at position 0. + */ + case TYPE_EXYNOS5250: + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { + reg = sphy->pmuregs + + sphy->drv_data->devphy_reg_offset; + en_mask = sphy->drv_data->devphy_en_mask; + } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { + reg = sphy->pmuregs + + sphy->drv_data->hostphy_reg_offset; + en_mask = sphy->drv_data->hostphy_en_mask; + } + break; + default: + dev_err(sphy->dev, "Invalid SoC type\n"); + return; + } + + reg_val = readl(reg); + + if (on) + reg_val &= ~en_mask; + else + reg_val |= en_mask; + + writel(reg_val, reg); +} + +/* + * Configure the mode of working of usb-phy here: HOST/DEVICE. + */ +static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) +{ + u32 reg; + + if (!sphy->sysreg) { + dev_warn(sphy->dev, "Can't configure specified phy mode\n"); + return; + } + + reg = readl(sphy->sysreg); + + if (sphy->phy_type == USB_PHY_TYPE_DEVICE) + reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; + else if (sphy->phy_type == USB_PHY_TYPE_HOST) + reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; + + writel(reg, sphy->sysreg); +} + +/* + * PHYs are different for USB Device and USB Host. + * This make sure that correct PHY type is selected before + * any operation on PHY. + */ +static int samsung_usbphy_set_type(struct usb_phy *phy, + enum samsung_usb_phy_type phy_type) +{ + struct samsung_usbphy *sphy = phy_to_sphy(phy); + + sphy->phy_type = phy_type; + + return 0; +} + +/* + * Returns reference clock frequency selection value + */ +static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) +{ + struct clk *ref_clk; + int refclk_freq = 0; + + /* + * In exynos5250 USB host and device PHY use + * external crystal clock XXTI + */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + ref_clk = clk_get(sphy->dev, "ext_xtal"); + else + ref_clk = clk_get(sphy->dev, "xusbxti"); + if (IS_ERR(ref_clk)) { + dev_err(sphy->dev, "Failed to get reference clock\n"); + return PTR_ERR(ref_clk); + } + + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) { + /* set clock frequency for PLL */ + switch (clk_get_rate(ref_clk)) { + case 9600 * KHZ: + refclk_freq = FSEL_CLKSEL_9600K; + break; + case 10 * MHZ: + refclk_freq = FSEL_CLKSEL_10M; + break; + case 12 * MHZ: + refclk_freq = FSEL_CLKSEL_12M; + break; + case 19200 * KHZ: + refclk_freq = FSEL_CLKSEL_19200K; + break; + case 20 * MHZ: + refclk_freq = FSEL_CLKSEL_20M; + break; + case 50 * MHZ: + refclk_freq = FSEL_CLKSEL_50M; + break; + case 24 * MHZ: + default: + /* default reference clock */ + refclk_freq = FSEL_CLKSEL_24M; + break; + } + } else { + switch (clk_get_rate(ref_clk)) { + case 12 * MHZ: + refclk_freq = PHYCLK_CLKSEL_12M; + break; + case 24 * MHZ: + refclk_freq = PHYCLK_CLKSEL_24M; + break; + case 48 * MHZ: + refclk_freq = PHYCLK_CLKSEL_48M; + break; + default: + if (sphy->drv_data->cpu_type == TYPE_S3C64XX) + refclk_freq = PHYCLK_CLKSEL_48M; + else + refclk_freq = PHYCLK_CLKSEL_24M; + break; + } + } + clk_put(ref_clk); + + return refclk_freq; +} + +static bool exynos5_phyhost_is_on(void *regs) +{ + u32 reg; + + reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + return !(reg & HOST_CTRL0_SIDDQ); +} + +static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyclk = sphy->ref_clk_freq; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + u32 ehcictrl; + u32 ohcictrl; + + /* + * phy_usage helps in keeping usage count for phy + * so that the first consumer enabling the phy is also + * the last consumer to disable it. + */ + + atomic_inc(&sphy->phy_usage); + + if (exynos5_phyhost_is_on(regs)) { + dev_info(sphy->dev, "Already power on PHY\n"); + return; + } + + /* Host configuration */ + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + + /* phy reference clock configuration */ + phyhost &= ~HOST_CTRL0_FSEL_MASK; + phyhost |= HOST_CTRL0_FSEL(phyclk); + + /* host phy reset */ + phyhost &= ~(HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL | + HOST_CTRL0_SIDDQ | + /* Enable normal mode of operation */ + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP); + + /* Link reset */ + phyhost |= (HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST | + /* COMMON Block configuration during suspend */ + HOST_CTRL0_COMMONON_N); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + udelay(10); + phyhost &= ~(HOST_CTRL0_LINKSWRST | + HOST_CTRL0_UTMISWRST); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + /* OTG configuration */ + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + + /* phy reference clock configuration */ + phyotg &= ~OTG_SYS_FSEL_MASK; + phyotg |= OTG_SYS_FSEL(phyclk); + + /* Enable normal mode of operation */ + phyotg &= ~(OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP | + OTG_SYS_REFCLKSEL_MASK | + /* COMMON Block configuration during suspend */ + OTG_SYS_COMMON_ON); + + /* OTG phy & link reset */ + phyotg |= (OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET | + OTG_SYS_OTGDISABLE | + /* Set phy refclk */ + OTG_SYS_REFCLKSEL_CLKCORE); + + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + udelay(10); + phyotg &= ~(OTG_SYS_PHY0_SWRST | + OTG_SYS_LINKSWRST_UOTG | + OTG_SYS_PHYLINK_SWRESET); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); + + /* HSIC phy configuration */ + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_PHYSWRST); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + udelay(10); + phyhsic &= ~HSIC_CTRL_PHYSWRST; + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + udelay(80); + + /* enable EHCI DMA burst */ + ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); + ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | + HOST_EHCICTRL_ENAINCR4 | + HOST_EHCICTRL_ENAINCR8 | + HOST_EHCICTRL_ENAINCR16); + writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); + + /* set ohci_suspend_on_n */ + ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); + ohcictrl |= HOST_OHCICTRL_SUSPLGCY; + writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); +} + +static void samsung_usbphy_enable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + u32 phyclk; + u32 rstcon; + + /* set clock frequency for PLL */ + phyclk = sphy->ref_clk_freq; + phypwr = readl(regs + SAMSUNG_PHYPWR); + rstcon = readl(regs + SAMSUNG_RSTCON); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phyclk &= ~PHYCLK_COMMON_ON_N; + phypwr &= ~PHYPWR_NORMAL_MASK; + rstcon |= RSTCON_SWRST; + break; + case TYPE_EXYNOS4210: + phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; + rstcon |= RSTCON_SWRST; + default: + break; + } + + writel(phyclk, regs + SAMSUNG_PHYCLK); + /* Configure PHY0 for normal operation*/ + writel(phypwr, regs + SAMSUNG_PHYPWR); + /* reset all ports of PHY and Link */ + writel(rstcon, regs + SAMSUNG_RSTCON); + udelay(10); + rstcon &= ~RSTCON_SWRST; + writel(rstcon, regs + SAMSUNG_RSTCON); +} + +static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phyhost; + u32 phyotg; + u32 phyhsic; + + if (atomic_dec_return(&sphy->phy_usage) > 0) { + dev_info(sphy->dev, "still being used\n"); + return; + } + + phyhsic = (HSIC_CTRL_REFCLKDIV_12 | + HSIC_CTRL_REFCLKSEL | + HSIC_CTRL_SIDDQ | + HSIC_CTRL_FORCESLEEP | + HSIC_CTRL_FORCESUSPEND); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); + writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); + + phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); + phyhost |= (HOST_CTRL0_SIDDQ | + HOST_CTRL0_FORCESUSPEND | + HOST_CTRL0_FORCESLEEP | + HOST_CTRL0_PHYSWRST | + HOST_CTRL0_PHYSWRSTALL); + writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); + + phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); + phyotg |= (OTG_SYS_FORCESUSPEND | + OTG_SYS_SIDDQ_UOTG | + OTG_SYS_FORCESLEEP); + writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); +} + +static void samsung_usbphy_disable(struct samsung_usbphy *sphy) +{ + void __iomem *regs = sphy->regs; + u32 phypwr; + + phypwr = readl(regs + SAMSUNG_PHYPWR); + + switch (sphy->drv_data->cpu_type) { + case TYPE_S3C64XX: + phypwr |= PHYPWR_NORMAL_MASK; + break; + case TYPE_EXYNOS4210: + phypwr |= PHYPWR_NORMAL_MASK_PHY0; + default: + break; + } + + /* Disable analog and otg block power */ + writel(phypwr, regs + SAMSUNG_PHYPWR); +} + +/* + * The function passed to the usb driver for phy initialization + */ +static int samsung_usbphy_init(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + int ret = 0; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + /* Enable the phy clock */ + ret = clk_prepare_enable(sphy->clk); + if (ret) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return ret; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* Disable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(false); + else + samsung_usbphy_set_isolation(sphy, false); + + /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ + samsung_usbphy_cfg_sel(sphy); + + /* Initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usbphy_enable(sphy); + else + samsung_usbphy_enable(sphy); + + spin_unlock_irqrestore(&sphy->lock, flags); + + /* Disable the phy clock */ + clk_disable_unprepare(sphy->clk); + + return ret; +} + +/* + * The function passed to the usb driver for phy shutdown + */ +static void samsung_usbphy_shutdown(struct usb_phy *phy) +{ + struct samsung_usbphy *sphy; + struct usb_bus *host = NULL; + unsigned long flags; + + sphy = phy_to_sphy(phy); + + host = phy->otg->host; + + if (clk_prepare_enable(sphy->clk)) { + dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); + return; + } + + spin_lock_irqsave(&sphy->lock, flags); + + if (host) { + /* setting default phy-type for USB 2.0 */ + if (!strstr(dev_name(host->controller), "ehci") || + !strstr(dev_name(host->controller), "ohci")) + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); + } else { + samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); + } + + /* De-initialize usb phy registers */ + if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) + samsung_exynos5_usbphy_disable(sphy); + else + samsung_usbphy_disable(sphy); + + /* Enable phy isolation */ + if (sphy->plat && sphy->plat->pmu_isolation) + sphy->plat->pmu_isolation(true); + else + samsung_usbphy_set_isolation(sphy, true); + + spin_unlock_irqrestore(&sphy->lock, flags); + + clk_disable_unprepare(sphy->clk); +} + +static const struct of_device_id samsung_usbphy_dt_match[]; + +static inline const struct samsung_usbphy_drvdata +*samsung_usbphy_get_driver_data(struct platform_device *pdev) +{ + if (pdev->dev.of_node) { + const struct of_device_id *match; + match = of_match_node(samsung_usbphy_dt_match, + pdev->dev.of_node); + return match->data; + } + + return (struct samsung_usbphy_drvdata *) + platform_get_device_id(pdev)->driver_data; +} + +static int samsung_usbphy_probe(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy; + struct usb_otg *otg; + struct samsung_usbphy_data *pdata = pdev->dev.platform_data; + const struct samsung_usbphy_drvdata *drv_data; + struct device *dev = &pdev->dev; + struct resource *phy_mem; + void __iomem *phy_base; + struct clk *clk; + int ret; + + phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!phy_mem) { + dev_err(dev, "%s: missing mem resource\n", __func__); + return -ENODEV; + } + + phy_base = devm_ioremap_resource(dev, phy_mem); + if (IS_ERR(phy_base)) + return PTR_ERR(phy_base); + + sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); + if (!sphy) + return -ENOMEM; + + otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); + if (!otg) + return -ENOMEM; + + drv_data = samsung_usbphy_get_driver_data(pdev); + + if (drv_data->cpu_type == TYPE_EXYNOS5250) + clk = devm_clk_get(dev, "usbhost"); + else + clk = devm_clk_get(dev, "otg"); + + if (IS_ERR(clk)) { + dev_err(dev, "Failed to get otg clock\n"); + return PTR_ERR(clk); + } + + sphy->dev = dev; + + if (dev->of_node) { + ret = samsung_usbphy_parse_dt(sphy); + if (ret < 0) + return ret; + } else { + if (!pdata) { + dev_err(dev, "no platform data specified\n"); + return -EINVAL; + } + } + + sphy->plat = pdata; + sphy->regs = phy_base; + sphy->clk = clk; + sphy->drv_data = drv_data; + sphy->phy.dev = sphy->dev; + sphy->phy.label = "samsung-usbphy"; + sphy->phy.init = samsung_usbphy_init; + sphy->phy.shutdown = samsung_usbphy_shutdown; + sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); + + sphy->phy.otg = otg; + sphy->phy.otg->phy = &sphy->phy; + sphy->phy.otg->set_host = samsung_usbphy_set_host; + + spin_lock_init(&sphy->lock); + + platform_set_drvdata(pdev, sphy); + + return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); +} + +static int samsung_usbphy_remove(struct platform_device *pdev) +{ + struct samsung_usbphy *sphy = platform_get_drvdata(pdev); + + usb_remove_phy(&sphy->phy); + + if (sphy->pmuregs) + iounmap(sphy->pmuregs); + if (sphy->sysreg) + iounmap(sphy->sysreg); + + return 0; +} + +static const struct samsung_usbphy_drvdata usbphy_s3c64xx = { + .cpu_type = TYPE_S3C64XX, + .devphy_en_mask = S3C64XX_USBPHY_ENABLE, +}; + +static const struct samsung_usbphy_drvdata usbphy_exynos4 = { + .cpu_type = TYPE_EXYNOS4210, + .devphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, +}; + +static struct samsung_usbphy_drvdata usbphy_exynos5 = { + .cpu_type = TYPE_EXYNOS5250, + .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, + .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, +}; + +#ifdef CONFIG_OF +static const struct of_device_id samsung_usbphy_dt_match[] = { + { + .compatible = "samsung,s3c64xx-usbphy", + .data = &usbphy_s3c64xx, + }, { + .compatible = "samsung,exynos4210-usbphy", + .data = &usbphy_exynos4, + }, { + .compatible = "samsung,exynos5250-usbphy", + .data = &usbphy_exynos5 + }, + {}, +}; +MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); +#endif + +static struct platform_device_id samsung_usbphy_driver_ids[] = { + { + .name = "s3c64xx-usbphy", + .driver_data = (unsigned long)&usbphy_s3c64xx, + }, { + .name = "exynos4210-usbphy", + .driver_data = (unsigned long)&usbphy_exynos4, + }, { + .name = "exynos5250-usbphy", + .driver_data = (unsigned long)&usbphy_exynos5, + }, + {}, +}; + +MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); + +static struct platform_driver samsung_usbphy_driver = { + .probe = samsung_usbphy_probe, + .remove = samsung_usbphy_remove, + .id_table = samsung_usbphy_driver_ids, + .driver = { + .name = "samsung-usbphy", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(samsung_usbphy_dt_match), + }, +}; + +module_platform_driver(samsung_usbphy_driver); + +MODULE_DESCRIPTION("Samsung USB phy controller"); +MODULE_AUTHOR("Praveen Paneri "); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-usbphy"); diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c new file mode 100644 index 0000000..5487d38 --- /dev/null +++ b/drivers/usb/phy/phy-tegra-usb.c @@ -0,0 +1,798 @@ +/* + * Copyright (C) 2010 Google, Inc. + * + * Author: + * Erik Gilling + * Benoit Goby + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define TEGRA_USB_BASE 0xC5000000 +#define TEGRA_USB_SIZE SZ_16K + +#define ULPI_VIEWPORT 0x170 + +#define USB_SUSP_CTRL 0x400 +#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) +#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) +#define USB_SUSP_CLR (1 << 5) +#define USB_PHY_CLK_VALID (1 << 7) +#define UTMIP_RESET (1 << 11) +#define UHSIC_RESET (1 << 11) +#define UTMIP_PHY_ENABLE (1 << 12) +#define ULPI_PHY_ENABLE (1 << 13) +#define USB_SUSP_SET (1 << 14) +#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) + +#define USB1_LEGACY_CTRL 0x410 +#define USB1_NO_LEGACY_MODE (1 << 0) +#define USB1_VBUS_SENSE_CTL_MASK (3 << 1) +#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ + (1 << 1) +#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) +#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) + +#define ULPI_TIMING_CTRL_0 0x424 +#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) +#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) + +#define ULPI_TIMING_CTRL_1 0x428 +#define ULPI_DATA_TRIMMER_LOAD (1 << 0) +#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) +#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) +#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) +#define ULPI_DIR_TRIMMER_LOAD (1 << 24) +#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) + +#define UTMIP_PLL_CFG1 0x804 +#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) +#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) + +#define UTMIP_XCVR_CFG0 0x808 +#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) +#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) +#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) +#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) +#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) +#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) +#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) + +#define UTMIP_BIAS_CFG0 0x80c +#define UTMIP_OTGPD (1 << 11) +#define UTMIP_BIASPD (1 << 10) + +#define UTMIP_HSRX_CFG0 0x810 +#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) +#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) + +#define UTMIP_HSRX_CFG1 0x814 +#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) + +#define UTMIP_TX_CFG0 0x820 +#define UTMIP_FS_PREABMLE_J (1 << 19) +#define UTMIP_HS_DISCON_DISABLE (1 << 8) + +#define UTMIP_MISC_CFG0 0x824 +#define UTMIP_DPDM_OBSERVE (1 << 26) +#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) +#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) +#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) +#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) +#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) + +#define UTMIP_MISC_CFG1 0x828 +#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) +#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) + +#define UTMIP_DEBOUNCE_CFG0 0x82c +#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) + +#define UTMIP_BAT_CHRG_CFG0 0x830 +#define UTMIP_PD_CHRG (1 << 0) + +#define UTMIP_SPARE_CFG0 0x834 +#define FUSE_SETUP_SEL (1 << 3) + +#define UTMIP_XCVR_CFG1 0x838 +#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) +#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) +#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) +#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) + +#define UTMIP_BIAS_CFG1 0x83c +#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) + +static DEFINE_SPINLOCK(utmip_pad_lock); +static int utmip_pad_count; + +struct tegra_xtal_freq { + int freq; + u8 enable_delay; + u8 stable_count; + u8 active_delay; + u8 xtal_freq_count; + u16 debounce; +}; + +static const struct tegra_xtal_freq tegra_freq_table[] = { + { + .freq = 12000000, + .enable_delay = 0x02, + .stable_count = 0x2F, + .active_delay = 0x04, + .xtal_freq_count = 0x76, + .debounce = 0x7530, + }, + { + .freq = 13000000, + .enable_delay = 0x02, + .stable_count = 0x33, + .active_delay = 0x05, + .xtal_freq_count = 0x7F, + .debounce = 0x7EF4, + }, + { + .freq = 19200000, + .enable_delay = 0x03, + .stable_count = 0x4B, + .active_delay = 0x06, + .xtal_freq_count = 0xBB, + .debounce = 0xBB80, + }, + { + .freq = 26000000, + .enable_delay = 0x04, + .stable_count = 0x66, + .active_delay = 0x09, + .xtal_freq_count = 0xFE, + .debounce = 0xFDE8, + }, +}; + +static struct tegra_utmip_config utmip_default[] = { + [0] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 1, + .xcvr_lsrslew = 1, + }, + [2] = { + .hssync_start_delay = 9, + .idle_wait_delay = 17, + .elastic_limit = 16, + .term_range_adj = 6, + .xcvr_setup = 9, + .xcvr_lsfslew = 2, + .xcvr_lsrslew = 2, + }, +}; + +static int utmip_pad_open(struct tegra_usb_phy *phy) +{ + phy->pad_clk = clk_get_sys("utmip-pad", NULL); + if (IS_ERR(phy->pad_clk)) { + pr_err("%s: can't get utmip pad clock\n", __func__); + return PTR_ERR(phy->pad_clk); + } + + if (phy->is_legacy_phy) { + phy->pad_regs = phy->regs; + } else { + phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); + if (!phy->pad_regs) { + pr_err("%s: can't remap usb registers\n", __func__); + clk_put(phy->pad_clk); + return -ENOMEM; + } + } + return 0; +} + +static void utmip_pad_close(struct tegra_usb_phy *phy) +{ + if (!phy->is_legacy_phy) + iounmap(phy->pad_regs); + clk_put(phy->pad_clk); +} + +static void utmip_pad_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + clk_prepare_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (utmip_pad_count++ == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable_unprepare(phy->pad_clk); +} + +static int utmip_pad_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val, flags; + void __iomem *base = phy->pad_regs; + + if (!utmip_pad_count) { + pr_err("%s: utmip pad already powered off\n", __func__); + return -EINVAL; + } + + clk_prepare_enable(phy->pad_clk); + + spin_lock_irqsave(&utmip_pad_lock, flags); + + if (--utmip_pad_count == 0) { + val = readl(base + UTMIP_BIAS_CFG0); + val |= UTMIP_OTGPD | UTMIP_BIASPD; + writel(val, base + UTMIP_BIAS_CFG0); + } + + spin_unlock_irqrestore(&utmip_pad_lock, flags); + + clk_disable_unprepare(phy->pad_clk); + + return 0; +} + +static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) +{ + unsigned long timeout = 2000; + do { + if ((readl(reg) & mask) == result) + return 0; + udelay(1); + timeout--; + } while (timeout); + return -1; +} + +static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->is_legacy_phy) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } else + tegra_ehci_set_phcd(&phy->u_phy, true); + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + if (phy->is_legacy_phy) { + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + udelay(10); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + } else + tegra_ehci_set_phcd(&phy->u_phy, false); + + if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, + USB_PHY_CLK_VALID)) + pr_err("%s: timeout waiting for phy to stabilize\n", __func__); +} + +static int utmi_phy_power_on(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_utmip_config *config = phy->config; + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->is_legacy_phy) { + val = readl(base + USB1_LEGACY_CTRL); + val |= USB1_NO_LEGACY_MODE; + writel(val, base + USB1_LEGACY_CTRL); + } + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_FS_PREABMLE_J; + writel(val, base + UTMIP_TX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG0); + val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); + val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); + val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); + writel(val, base + UTMIP_HSRX_CFG0); + + val = readl(base + UTMIP_HSRX_CFG1); + val &= ~UTMIP_HS_SYNC_START_DLY(~0); + val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); + writel(val, base + UTMIP_HSRX_CFG1); + + val = readl(base + UTMIP_DEBOUNCE_CFG0); + val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); + val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); + writel(val, base + UTMIP_DEBOUNCE_CFG0); + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; + writel(val, base + UTMIP_MISC_CFG0); + + val = readl(base + UTMIP_MISC_CFG1); + val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); + val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | + UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); + writel(val, base + UTMIP_MISC_CFG1); + + val = readl(base + UTMIP_PLL_CFG1); + val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); + val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | + UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); + writel(val, base + UTMIP_PLL_CFG1); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); + writel(val, base + USB_SUSP_CTRL); + } + + utmip_pad_power_on(phy); + + val = readl(base + UTMIP_XCVR_CFG0); + val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | + UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | + UTMIP_XCVR_HSSLEW_MSB(~0)); + val |= UTMIP_XCVR_SETUP(config->xcvr_setup); + val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); + val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); + val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); + writel(val, base + UTMIP_XCVR_CFG1); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val &= ~UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_BIAS_CFG1); + val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); + val |= UTMIP_BIAS_PDTRK_COUNT(0x5); + writel(val, base + UTMIP_BIAS_CFG1); + + if (phy->is_legacy_phy) { + val = readl(base + UTMIP_SPARE_CFG0); + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) + val &= ~FUSE_SETUP_SEL; + else + val |= FUSE_SETUP_SEL; + writel(val, base + UTMIP_SPARE_CFG0); + } else { + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val &= ~UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + if (phy->is_legacy_phy) { + val = readl(base + USB1_LEGACY_CTRL); + val &= ~USB1_VBUS_SENSE_CTL_MASK; + val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; + writel(val, base + USB1_LEGACY_CTRL); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_SET; + writel(val, base + USB_SUSP_CTRL); + } + + utmi_phy_clk_enable(phy); + + if (!phy->is_legacy_phy) + tegra_ehci_set_pts(&phy->u_phy, 0); + + return 0; +} + +static int utmi_phy_power_off(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + utmi_phy_clk_disable(phy); + + if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); + val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); + writel(val, base + USB_SUSP_CTRL); + } + + val = readl(base + USB_SUSP_CTRL); + val |= UTMIP_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + UTMIP_BAT_CHRG_CFG0); + val |= UTMIP_PD_CHRG; + writel(val, base + UTMIP_BAT_CHRG_CFG0); + + val = readl(base + UTMIP_XCVR_CFG0); + val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | + UTMIP_FORCE_PDZI_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG0); + + val = readl(base + UTMIP_XCVR_CFG1); + val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | + UTMIP_FORCE_PDDR_POWERDOWN; + writel(val, base + UTMIP_XCVR_CFG1); + + return utmip_pad_power_off(phy); +} + +static void utmi_phy_preresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val |= UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_postresume(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_TX_CFG0); + val &= ~UTMIP_HS_DISCON_DISABLE; + writel(val, base + UTMIP_TX_CFG0); +} + +static void utmi_phy_restore_start(struct tegra_usb_phy *phy, + enum tegra_usb_phy_port_speed port_speed) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); + if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; + else + val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; + writel(val, base + UTMIP_MISC_CFG0); + udelay(1); + + val = readl(base + UTMIP_MISC_CFG0); + val |= UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static void utmi_phy_restore_end(struct tegra_usb_phy *phy) +{ + unsigned long val; + void __iomem *base = phy->regs; + + val = readl(base + UTMIP_MISC_CFG0); + val &= ~UTMIP_DPDM_OBSERVE; + writel(val, base + UTMIP_MISC_CFG0); + udelay(10); +} + +static int ulpi_phy_power_on(struct tegra_usb_phy *phy) +{ + int ret; + unsigned long val; + void __iomem *base = phy->regs; + struct tegra_ulpi_config *config = phy->config; + + gpio_direction_output(config->reset_gpio, 0); + msleep(5); + gpio_direction_output(config->reset_gpio, 1); + + clk_prepare_enable(phy->clk); + msleep(1); + + val = readl(base + USB_SUSP_CTRL); + val |= UHSIC_RESET; + writel(val, base + USB_SUSP_CTRL); + + val = readl(base + ULPI_TIMING_CTRL_0); + val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; + writel(val, base + ULPI_TIMING_CTRL_0); + + val = readl(base + USB_SUSP_CTRL); + val |= ULPI_PHY_ENABLE; + writel(val, base + USB_SUSP_CTRL); + + val = 0; + writel(val, base + ULPI_TIMING_CTRL_1); + + val |= ULPI_DATA_TRIMMER_SEL(4); + val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); + val |= ULPI_DIR_TRIMMER_SEL(4); + writel(val, base + ULPI_TIMING_CTRL_1); + udelay(10); + + val |= ULPI_DATA_TRIMMER_LOAD; + val |= ULPI_STPDIRNXT_TRIMMER_LOAD; + val |= ULPI_DIR_TRIMMER_LOAD; + writel(val, base + ULPI_TIMING_CTRL_1); + + /* Fix VbusInvalid due to floating VBUS */ + ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); + if (ret) { + pr_err("%s: ulpi write failed\n", __func__); + return ret; + } + + val = readl(base + USB_SUSP_CTRL); + val |= USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + udelay(100); + + val = readl(base + USB_SUSP_CTRL); + val &= ~USB_SUSP_CLR; + writel(val, base + USB_SUSP_CTRL); + + return 0; +} + +static int ulpi_phy_power_off(struct tegra_usb_phy *phy) +{ + struct tegra_ulpi_config *config = phy->config; + + clk_disable(phy->clk); + return gpio_direction_output(config->reset_gpio, 0); +} + +static int tegra_phy_init(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + struct tegra_ulpi_config *ulpi_config; + int err; + + if (phy->is_ulpi_phy) { + ulpi_config = phy->config; + phy->clk = clk_get_sys(NULL, ulpi_config->clk); + if (IS_ERR(phy->clk)) { + pr_err("%s: can't get ulpi clock\n", __func__); + err = -ENXIO; + goto err1; + } + if (!gpio_is_valid(ulpi_config->reset_gpio)) + ulpi_config->reset_gpio = + of_get_named_gpio(phy->dev->of_node, + "nvidia,phy-reset-gpio", 0); + if (!gpio_is_valid(ulpi_config->reset_gpio)) { + pr_err("%s: invalid reset gpio: %d\n", __func__, + ulpi_config->reset_gpio); + err = -EINVAL; + goto err1; + } + gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); + gpio_direction_output(ulpi_config->reset_gpio, 0); + phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); + phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; + } else { + err = utmip_pad_open(phy); + if (err < 0) + goto err1; + } + return 0; +err1: + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); + return err; +} + +static void tegra_usb_phy_close(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (phy->is_ulpi_phy) + clk_put(phy->clk); + else + utmip_pad_close(phy); + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); + kfree(phy); +} + +static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) +{ + if (phy->is_ulpi_phy) + return ulpi_phy_power_on(phy); + else + return utmi_phy_power_on(phy); +} + +static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) +{ + if (phy->is_ulpi_phy) + return ulpi_phy_power_off(phy); + else + return utmi_phy_power_off(phy); +} + +static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + if (suspend) + return tegra_usb_phy_power_off(phy); + else + return tegra_usb_phy_power_on(phy); +} + +struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, + void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) +{ + struct tegra_usb_phy *phy; + unsigned long parent_rate; + int i; + int err; + struct device_node *np = dev->of_node; + + phy = kzalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); + if (!phy) + return ERR_PTR(-ENOMEM); + + phy->instance = instance; + phy->regs = regs; + phy->config = config; + phy->mode = phy_mode; + phy->dev = dev; + phy->is_legacy_phy = + of_property_read_bool(np, "nvidia,has-legacy-mode"); + err = of_property_match_string(np, "phy_type", "ulpi"); + if (err < 0) + phy->is_ulpi_phy = false; + else + phy->is_ulpi_phy = true; + + if (!phy->config) { + if (phy->is_ulpi_phy) { + pr_err("%s: ulpi phy configuration missing", __func__); + err = -EINVAL; + goto err0; + } else { + phy->config = &utmip_default[instance]; + } + } + + phy->pll_u = clk_get_sys(NULL, "pll_u"); + if (IS_ERR(phy->pll_u)) { + pr_err("Can't get pll_u clock\n"); + err = PTR_ERR(phy->pll_u); + goto err0; + } + clk_prepare_enable(phy->pll_u); + + parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); + for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { + if (tegra_freq_table[i].freq == parent_rate) { + phy->freq = &tegra_freq_table[i]; + break; + } + } + if (!phy->freq) { + pr_err("invalid pll_u parent rate %ld\n", parent_rate); + err = -EINVAL; + goto err1; + } + + phy->u_phy.init = tegra_phy_init; + phy->u_phy.shutdown = tegra_usb_phy_close; + phy->u_phy.set_suspend = tegra_usb_phy_suspend; + + return phy; + +err1: + clk_disable_unprepare(phy->pll_u); + clk_put(phy->pll_u); +err0: + kfree(phy); + return ERR_PTR(err); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_open); + +void tegra_usb_phy_preresume(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) + utmi_phy_preresume(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); + +void tegra_usb_phy_postresume(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) + utmi_phy_postresume(phy); +} +EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); + +void tegra_ehci_phy_restore_start(struct usb_phy *x, + enum tegra_usb_phy_port_speed port_speed) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) + utmi_phy_restore_start(phy, port_speed); +} +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); + +void tegra_ehci_phy_restore_end(struct usb_phy *x) +{ + struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); + + if (!phy->is_ulpi_phy) + utmi_phy_restore_end(phy); +} +EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); + diff --git a/drivers/usb/phy/phy-twl4030-usb.c b/drivers/usb/phy/phy-twl4030-usb.c new file mode 100644 index 0000000..a994715 --- /dev/null +++ b/drivers/usb/phy/phy-twl4030-usb.c @@ -0,0 +1,728 @@ +/* + * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller + * + * Copyright (C) 2004-2007 Texas Instruments + * Copyright (C) 2008 Nokia Corporation + * Contact: Felipe Balbi + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * - HS USB ULPI mode works. + * - 3-pin mode support may be added in future. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Register defines */ + +#define MCPC_CTRL 0x30 +#define MCPC_CTRL_RTSOL (1 << 7) +#define MCPC_CTRL_EXTSWR (1 << 6) +#define MCPC_CTRL_EXTSWC (1 << 5) +#define MCPC_CTRL_VOICESW (1 << 4) +#define MCPC_CTRL_OUT64K (1 << 3) +#define MCPC_CTRL_RTSCTSSW (1 << 2) +#define MCPC_CTRL_HS_UART (1 << 0) + +#define MCPC_IO_CTRL 0x33 +#define MCPC_IO_CTRL_MICBIASEN (1 << 5) +#define MCPC_IO_CTRL_CTS_NPU (1 << 4) +#define MCPC_IO_CTRL_RXD_PU (1 << 3) +#define MCPC_IO_CTRL_TXDTYP (1 << 2) +#define MCPC_IO_CTRL_CTSTYP (1 << 1) +#define MCPC_IO_CTRL_RTSTYP (1 << 0) + +#define MCPC_CTRL2 0x36 +#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) + +#define OTHER_FUNC_CTRL 0x80 +#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) +#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) + +#define OTHER_IFC_CTRL 0x83 +#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) +#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) +#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) +#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) +#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) +#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) + +#define OTHER_INT_EN_RISE 0x86 +#define OTHER_INT_EN_FALL 0x89 +#define OTHER_INT_STS 0x8C +#define OTHER_INT_LATCH 0x8D +#define OTHER_INT_VB_SESS_VLD (1 << 7) +#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ +#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ +#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ +#define OTHER_INT_MANU (1 << 1) +#define OTHER_INT_ABNORMAL_STRESS (1 << 0) + +#define ID_STATUS 0x96 +#define ID_RES_FLOAT (1 << 4) +#define ID_RES_440K (1 << 3) +#define ID_RES_200K (1 << 2) +#define ID_RES_102K (1 << 1) +#define ID_RES_GND (1 << 0) + +#define POWER_CTRL 0xAC +#define POWER_CTRL_OTG_ENAB (1 << 5) + +#define OTHER_IFC_CTRL2 0xAF +#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) +#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) +#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) +#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) + +#define REG_CTRL_EN 0xB2 +#define REG_CTRL_ERROR 0xB5 +#define ULPI_I2C_CONFLICT_INTEN (1 << 0) + +#define OTHER_FUNC_CTRL2 0xB8 +#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) + +/* following registers do not have separate _clr and _set registers */ +#define VBUS_DEBOUNCE 0xC0 +#define ID_DEBOUNCE 0xC1 +#define VBAT_TIMER 0xD3 +#define PHY_PWR_CTRL 0xFD +#define PHY_PWR_PHYPWD (1 << 0) +#define PHY_CLK_CTRL 0xFE +#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) +#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) +#define REQ_PHY_DPLL_CLK (1 << 0) +#define PHY_CLK_CTRL_STS 0xFF +#define PHY_DPLL_CLK (1 << 0) + +/* In module TWL_MODULE_PM_MASTER */ +#define STS_HW_CONDITIONS 0x0F + +/* In module TWL_MODULE_PM_RECEIVER */ +#define VUSB_DEDICATED1 0x7D +#define VUSB_DEDICATED2 0x7E +#define VUSB1V5_DEV_GRP 0x71 +#define VUSB1V5_TYPE 0x72 +#define VUSB1V5_REMAP 0x73 +#define VUSB1V8_DEV_GRP 0x74 +#define VUSB1V8_TYPE 0x75 +#define VUSB1V8_REMAP 0x76 +#define VUSB3V1_DEV_GRP 0x77 +#define VUSB3V1_TYPE 0x78 +#define VUSB3V1_REMAP 0x79 + +/* In module TWL4030_MODULE_INTBR */ +#define PMBR1 0x0D +#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) + +struct twl4030_usb { + struct usb_phy phy; + struct device *dev; + + /* TWL4030 internal USB regulator supplies */ + struct regulator *usb1v5; + struct regulator *usb1v8; + struct regulator *usb3v1; + + /* for vbus reporting with irqs disabled */ + spinlock_t lock; + + /* pin configuration */ + enum twl4030_usb_mode usb_mode; + + int irq; + enum omap_musb_vbus_id_status linkstat; + bool vbus_supplied; + u8 asleep; + bool irq_enabled; +}; + +/* internal define on top of container_of */ +#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy) + +/*-------------------------------------------------------------------------*/ + +static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, + u8 module, u8 data, u8 address) +{ + u8 check; + + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 1, module, address, check, data); + + /* Failed once: Try again */ + if ((twl_i2c_write_u8(module, data, address) >= 0) && + (twl_i2c_read_u8(module, &check, address) >= 0) && + (check == data)) + return 0; + dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", + 2, module, address, check, data); + + /* Failed again: Return error */ + return -EBUSY; +} + +#define twl4030_usb_write_verify(twl, address, data) \ + twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address)) + +static inline int twl4030_usb_write(struct twl4030_usb *twl, + u8 address, u8 data) +{ + int ret = 0; + + ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address); + if (ret < 0) + dev_dbg(twl->dev, + "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); + return ret; +} + +static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) +{ + u8 data; + int ret = 0; + + ret = twl_i2c_read_u8(module, &data, address); + if (ret >= 0) + ret = data; + else + dev_dbg(twl->dev, + "TWL4030:readb[0x%x,0x%x] Error %d\n", + module, address, ret); + + return ret; +} + +static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) +{ + return twl4030_readb(twl, TWL_MODULE_USB, address); +} + +/*-------------------------------------------------------------------------*/ + +static inline int +twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_SET(reg), bits); +} + +static inline int +twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) +{ + return twl4030_usb_write(twl, ULPI_CLR(reg), bits); +} + +/*-------------------------------------------------------------------------*/ + +static enum omap_musb_vbus_id_status + twl4030_usb_linkstat(struct twl4030_usb *twl) +{ + int status; + enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN; + + twl->vbus_supplied = false; + + /* + * For ID/VBUS sensing, see manual section 15.4.8 ... + * except when using only battery backup power, two + * comparators produce VBUS_PRES and ID_PRES signals, + * which don't match docs elsewhere. But ... BIT(7) + * and BIT(2) of STS_HW_CONDITIONS, respectively, do + * seem to match up. If either is true the USB_PRES + * signal is active, the OTG module is activated, and + * its interrupt may be raised (may wake the system). + */ + status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS); + if (status < 0) + dev_err(twl->dev, "USB link status err %d\n", status); + else if (status & (BIT(7) | BIT(2))) { + if (status & (BIT(7))) + twl->vbus_supplied = true; + + if (status & BIT(2)) + linkstat = OMAP_MUSB_ID_GROUND; + else + linkstat = OMAP_MUSB_VBUS_VALID; + } else { + if (twl->linkstat != OMAP_MUSB_UNKNOWN) + linkstat = OMAP_MUSB_VBUS_OFF; + } + + dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", + status, status, linkstat); + + /* REVISIT this assumes host and peripheral controllers + * are registered, and that both are active... + */ + + spin_lock_irq(&twl->lock); + twl->linkstat = linkstat; + spin_unlock_irq(&twl->lock); + + return linkstat; +} + +static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) +{ + twl->usb_mode = mode; + + switch (mode) { + case T2_USB_MODE_ULPI: + twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, + ULPI_IFC_CTRL_CARKITMODE); + twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, + ULPI_FUNC_CTRL_XCVRSEL_MASK | + ULPI_FUNC_CTRL_OPMODE_MASK); + break; + case -1: + /* FIXME: power on defaults */ + break; + default: + dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", + mode); + break; + }; +} + +static void twl4030_i2c_access(struct twl4030_usb *twl, int on) +{ + unsigned long timeout; + int val = twl4030_usb_read(twl, PHY_CLK_CTRL); + + if (val >= 0) { + if (on) { + /* enable DPLL to access PHY registers over I2C */ + val |= REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + + timeout = jiffies + HZ; + while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK) + && time_before(jiffies, timeout)) + udelay(10); + if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & + PHY_DPLL_CLK)) + dev_err(twl->dev, "Timeout setting T2 HSUSB " + "PHY DPLL clock\n"); + } else { + /* let ULPI control the DPLL clock */ + val &= ~REQ_PHY_DPLL_CLK; + WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, + (u8)val) < 0); + } + } +} + +static void __twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); + + if (on) + pwr &= ~PHY_PWR_PHYPWD; + else + pwr |= PHY_PWR_PHYPWD; + + WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); +} + +static void twl4030_phy_power(struct twl4030_usb *twl, int on) +{ + if (on) { + regulator_enable(twl->usb3v1); + regulator_enable(twl->usb1v8); + /* + * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP + * in twl4030) resets the VUSB_DEDICATED2 register. This reset + * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to + * SLEEP. We work around this by clearing the bit after usv3v1 + * is re-activated. This ensures that VUSB3V1 is really active. + */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); + regulator_enable(twl->usb1v5); + __twl4030_phy_power(twl, 1); + twl4030_usb_write(twl, PHY_CLK_CTRL, + twl4030_usb_read(twl, PHY_CLK_CTRL) | + (PHY_CLK_CTRL_CLOCKGATING_EN | + PHY_CLK_CTRL_CLK32K_EN)); + } else { + __twl4030_phy_power(twl, 0); + regulator_disable(twl->usb1v5); + regulator_disable(twl->usb1v8); + regulator_disable(twl->usb3v1); + } +} + +static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) +{ + if (twl->asleep) + return; + + twl4030_phy_power(twl, 0); + twl->asleep = 1; + dev_dbg(twl->dev, "%s\n", __func__); +} + +static void __twl4030_phy_resume(struct twl4030_usb *twl) +{ + twl4030_phy_power(twl, 1); + twl4030_i2c_access(twl, 1); + twl4030_usb_set_mode(twl, twl->usb_mode); + if (twl->usb_mode == T2_USB_MODE_ULPI) + twl4030_i2c_access(twl, 0); +} + +static void twl4030_phy_resume(struct twl4030_usb *twl) +{ + if (!twl->asleep) + return; + __twl4030_phy_resume(twl); + twl->asleep = 0; + dev_dbg(twl->dev, "%s\n", __func__); +} + +static int twl4030_usb_ldo_init(struct twl4030_usb *twl) +{ + /* Enable writing to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, + TWL4030_PM_MASTER_PROTECT_KEY); + + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, + TWL4030_PM_MASTER_PROTECT_KEY); + + /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ + /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ + + /* input to VUSB3V1 LDO is from VBAT, not VBUS */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); + + /* Initialize 3.1V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + + twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); + if (IS_ERR(twl->usb3v1)) + return -ENODEV; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); + + /* Initialize 1.5V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + + twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); + if (IS_ERR(twl->usb1v5)) + goto fail1; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); + + /* Initialize 1.8V regulator */ + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + + twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); + if (IS_ERR(twl->usb1v8)) + goto fail2; + + twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); + + /* disable access to power configuration registers */ + twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, + TWL4030_PM_MASTER_PROTECT_KEY); + + return 0; + +fail2: + regulator_put(twl->usb1v5); + twl->usb1v5 = NULL; +fail1: + regulator_put(twl->usb3v1); + twl->usb3v1 = NULL; + return -ENODEV; +} + +static ssize_t twl4030_usb_vbus_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct twl4030_usb *twl = dev_get_drvdata(dev); + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&twl->lock, flags); + ret = sprintf(buf, "%s\n", + twl->vbus_supplied ? "on" : "off"); + spin_unlock_irqrestore(&twl->lock, flags); + + return ret; +} +static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); + +static irqreturn_t twl4030_usb_irq(int irq, void *_twl) +{ + struct twl4030_usb *twl = _twl; + enum omap_musb_vbus_id_status status; + + status = twl4030_usb_linkstat(twl); + if (status > 0) { + /* FIXME add a set_power() method so that B-devices can + * configure the charger appropriately. It's not always + * correct to consume VBUS power, and how much current to + * consume is a function of the USB configuration chosen + * by the host. + * + * REVISIT usb_gadget_vbus_connect(...) as needed, ditto + * its disconnect() sibling, when changing to/from the + * USB_LINK_VBUS state. musb_hdrc won't care until it + * starts to handle softconnect right. + */ + if (status == OMAP_MUSB_VBUS_OFF || + status == OMAP_MUSB_ID_FLOAT) + twl4030_phy_suspend(twl, 0); + else + twl4030_phy_resume(twl); + + omap_musb_mailbox(twl->linkstat); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + + return IRQ_HANDLED; +} + +static void twl4030_usb_phy_init(struct twl4030_usb *twl) +{ + enum omap_musb_vbus_id_status status; + + status = twl4030_usb_linkstat(twl); + if (status > 0) { + if (status == OMAP_MUSB_VBUS_OFF || + status == OMAP_MUSB_ID_FLOAT) { + __twl4030_phy_power(twl, 0); + twl->asleep = 1; + } else { + __twl4030_phy_resume(twl); + twl->asleep = 0; + } + + omap_musb_mailbox(twl->linkstat); + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); +} + +static int twl4030_set_suspend(struct usb_phy *x, int suspend) +{ + struct twl4030_usb *twl = phy_to_twl(x); + + if (suspend) + twl4030_phy_suspend(twl, 1); + else + twl4030_phy_resume(twl); + + return 0; +} + +static int twl4030_set_peripheral(struct usb_otg *otg, + struct usb_gadget *gadget) +{ + if (!otg) + return -ENODEV; + + otg->gadget = gadget; + if (!gadget) + otg->phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + if (!otg) + return -ENODEV; + + otg->host = host; + if (!host) + otg->phy->state = OTG_STATE_UNDEFINED; + + return 0; +} + +static int twl4030_usb_probe(struct platform_device *pdev) +{ + struct twl4030_usb_data *pdata = pdev->dev.platform_data; + struct twl4030_usb *twl; + int status, err; + struct usb_otg *otg; + struct device_node *np = pdev->dev.of_node; + + twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); + if (!twl) + return -ENOMEM; + + if (np) + of_property_read_u32(np, "usb_mode", + (enum twl4030_usb_mode *)&twl->usb_mode); + else if (pdata) + twl->usb_mode = pdata->usb_mode; + else { + dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); + return -EINVAL; + } + + otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); + if (!otg) + return -ENOMEM; + + twl->dev = &pdev->dev; + twl->irq = platform_get_irq(pdev, 0); + twl->vbus_supplied = false; + twl->asleep = 1; + twl->linkstat = OMAP_MUSB_UNKNOWN; + + twl->phy.dev = twl->dev; + twl->phy.label = "twl4030"; + twl->phy.otg = otg; + twl->phy.type = USB_PHY_TYPE_USB2; + twl->phy.set_suspend = twl4030_set_suspend; + + otg->phy = &twl->phy; + otg->set_host = twl4030_set_host; + otg->set_peripheral = twl4030_set_peripheral; + + /* init spinlock for workqueue */ + spin_lock_init(&twl->lock); + + err = twl4030_usb_ldo_init(twl); + if (err) { + dev_err(&pdev->dev, "ldo init failed\n"); + return err; + } + usb_add_phy_dev(&twl->phy); + + platform_set_drvdata(pdev, twl); + if (device_create_file(&pdev->dev, &dev_attr_vbus)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + + /* Our job is to use irqs and status from the power module + * to keep the transceiver disabled when nothing's connected. + * + * FIXME we actually shouldn't start enabling it until the + * USB controller drivers have said they're ready, by calling + * set_host() and/or set_peripheral() ... OTG_capable boards + * need both handles, otherwise just one suffices. + */ + twl->irq_enabled = true; + status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | + IRQF_ONESHOT, "twl4030_usb", twl); + if (status < 0) { + dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", + twl->irq, status); + return status; + } + + /* Power down phy or make it work according to + * current link state. + */ + twl4030_usb_phy_init(twl); + + dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); + return 0; +} + +static int __exit twl4030_usb_remove(struct platform_device *pdev) +{ + struct twl4030_usb *twl = platform_get_drvdata(pdev); + int val; + + free_irq(twl->irq, twl); + device_remove_file(twl->dev, &dev_attr_vbus); + + /* set transceiver mode to power on defaults */ + twl4030_usb_set_mode(twl, -1); + + /* autogate 60MHz ULPI clock, + * clear dpll clock request for i2c access, + * disable 32KHz + */ + val = twl4030_usb_read(twl, PHY_CLK_CTRL); + if (val >= 0) { + val |= PHY_CLK_CTRL_CLOCKGATING_EN; + val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); + twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); + } + + /* disable complete OTG block */ + twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); + + if (!twl->asleep) + twl4030_phy_power(twl, 0); + regulator_put(twl->usb1v5); + regulator_put(twl->usb1v8); + regulator_put(twl->usb3v1); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id twl4030_usb_id_table[] = { + { .compatible = "ti,twl4030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); +#endif + +static struct platform_driver twl4030_usb_driver = { + .probe = twl4030_usb_probe, + .remove = __exit_p(twl4030_usb_remove), + .driver = { + .name = "twl4030_usb", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl4030_usb_id_table), + }, +}; + +static int __init twl4030_usb_init(void) +{ + return platform_driver_register(&twl4030_usb_driver); +} +subsys_initcall(twl4030_usb_init); + +static void __exit twl4030_usb_exit(void) +{ + platform_driver_unregister(&twl4030_usb_driver); +} +module_exit(twl4030_usb_exit); + +MODULE_ALIAS("platform:twl4030_usb"); +MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); +MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c new file mode 100644 index 0000000..8cd6cf4 --- /dev/null +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -0,0 +1,446 @@ +/* + * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver. + * + * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Hema HK + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* usb register definitions */ +#define USB_VENDOR_ID_LSB 0x00 +#define USB_VENDOR_ID_MSB 0x01 +#define USB_PRODUCT_ID_LSB 0x02 +#define USB_PRODUCT_ID_MSB 0x03 +#define USB_VBUS_CTRL_SET 0x04 +#define USB_VBUS_CTRL_CLR 0x05 +#define USB_ID_CTRL_SET 0x06 +#define USB_ID_CTRL_CLR 0x07 +#define USB_VBUS_INT_SRC 0x08 +#define USB_VBUS_INT_LATCH_SET 0x09 +#define USB_VBUS_INT_LATCH_CLR 0x0A +#define USB_VBUS_INT_EN_LO_SET 0x0B +#define USB_VBUS_INT_EN_LO_CLR 0x0C +#define USB_VBUS_INT_EN_HI_SET 0x0D +#define USB_VBUS_INT_EN_HI_CLR 0x0E +#define USB_ID_INT_SRC 0x0F +#define USB_ID_INT_LATCH_SET 0x10 +#define USB_ID_INT_LATCH_CLR 0x11 + +#define USB_ID_INT_EN_LO_SET 0x12 +#define USB_ID_INT_EN_LO_CLR 0x13 +#define USB_ID_INT_EN_HI_SET 0x14 +#define USB_ID_INT_EN_HI_CLR 0x15 +#define USB_OTG_ADP_CTRL 0x16 +#define USB_OTG_ADP_HIGH 0x17 +#define USB_OTG_ADP_LOW 0x18 +#define USB_OTG_ADP_RISE 0x19 +#define USB_OTG_REVISION 0x1A + +/* to be moved to LDO */ +#define TWL6030_MISC2 0xE5 +#define TWL6030_CFG_LDO_PD2 0xF5 +#define TWL6030_BACKUP_REG 0xFA + +#define STS_HW_CONDITIONS 0x21 + +/* In module TWL6030_MODULE_PM_MASTER */ +#define STS_HW_CONDITIONS 0x21 +#define STS_USB_ID BIT(2) + +/* In module TWL6030_MODULE_PM_RECEIVER */ +#define VUSB_CFG_TRANS 0x71 +#define VUSB_CFG_STATE 0x72 +#define VUSB_CFG_VOLTAGE 0x73 + +/* in module TWL6030_MODULE_MAIN_CHARGE */ + +#define CHARGERUSB_CTRL1 0x8 + +#define CONTROLLER_STAT1 0x03 +#define VBUS_DET BIT(2) + +struct twl6030_usb { + struct phy_companion comparator; + struct device *dev; + + /* for vbus reporting with irqs disabled */ + spinlock_t lock; + + struct regulator *usb3v3; + + /* used to set vbus, in atomic path */ + struct work_struct set_vbus_work; + + int irq1; + int irq2; + enum omap_musb_vbus_id_status linkstat; + u8 asleep; + bool irq_enabled; + bool vbus_enable; + const char *regulator; +}; + +#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator) + +/*-------------------------------------------------------------------------*/ + +static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module, + u8 data, u8 address) +{ + int ret = 0; + + ret = twl_i2c_write_u8(module, data, address); + if (ret < 0) + dev_err(twl->dev, + "Write[0x%x] Error %d\n", address, ret); + return ret; +} + +static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) +{ + u8 data, ret = 0; + + ret = twl_i2c_read_u8(module, &data, address); + if (ret >= 0) + ret = data; + else + dev_err(twl->dev, + "readb[0x%x,0x%x] Error %d\n", + module, address, ret); + return ret; +} + +static int twl6030_start_srp(struct phy_companion *comparator) +{ + struct twl6030_usb *twl = comparator_to_twl(comparator); + + twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET); + twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET); + + mdelay(100); + twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR); + + return 0; +} + +static int twl6030_usb_ldo_init(struct twl6030_usb *twl) +{ + /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ + twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); + + /* Program CFG_LDO_PD2 register and set VUSB bit */ + twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2); + + /* Program MISC2 register and set bit VUSB_IN_VBAT */ + twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); + + twl->usb3v3 = regulator_get(twl->dev, twl->regulator); + if (IS_ERR(twl->usb3v3)) + return -ENODEV; + + /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ + twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); + + /* + * Program the USB_ID_CTRL_SET register to enable GND drive + * and the ID comparators + */ + twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET); + + return 0; +} + +static ssize_t twl6030_usb_vbus_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct twl6030_usb *twl = dev_get_drvdata(dev); + unsigned long flags; + int ret = -EINVAL; + + spin_lock_irqsave(&twl->lock, flags); + + switch (twl->linkstat) { + case OMAP_MUSB_VBUS_VALID: + ret = snprintf(buf, PAGE_SIZE, "vbus\n"); + break; + case OMAP_MUSB_ID_GROUND: + ret = snprintf(buf, PAGE_SIZE, "id\n"); + break; + case OMAP_MUSB_VBUS_OFF: + ret = snprintf(buf, PAGE_SIZE, "none\n"); + break; + default: + ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); + } + spin_unlock_irqrestore(&twl->lock, flags); + + return ret; +} +static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); + +static irqreturn_t twl6030_usb_irq(int irq, void *_twl) +{ + struct twl6030_usb *twl = _twl; + enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; + u8 vbus_state, hw_state; + + hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); + + vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE, + CONTROLLER_STAT1); + if (!(hw_state & STS_USB_ID)) { + if (vbus_state & VBUS_DET) { + regulator_enable(twl->usb3v3); + twl->asleep = 1; + status = OMAP_MUSB_VBUS_VALID; + twl->linkstat = status; + omap_musb_mailbox(status); + } else { + if (twl->linkstat != OMAP_MUSB_UNKNOWN) { + status = OMAP_MUSB_VBUS_OFF; + twl->linkstat = status; + omap_musb_mailbox(status); + if (twl->asleep) { + regulator_disable(twl->usb3v3); + twl->asleep = 0; + } + } + } + } + sysfs_notify(&twl->dev->kobj, NULL, "vbus"); + + return IRQ_HANDLED; +} + +static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) +{ + struct twl6030_usb *twl = _twl; + enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; + u8 hw_state; + + hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); + + if (hw_state & STS_USB_ID) { + + regulator_enable(twl->usb3v3); + twl->asleep = 1; + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); + status = OMAP_MUSB_ID_GROUND; + twl->linkstat = status; + omap_musb_mailbox(status); + } else { + twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); + } + twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR); + + return IRQ_HANDLED; +} + +static int twl6030_enable_irq(struct twl6030_usb *twl) +{ + twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); + twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); + twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); + + twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, + REG_INT_MSK_LINE_C); + twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, + REG_INT_MSK_STS_C); + twl6030_usb_irq(twl->irq2, twl); + twl6030_usbotg_irq(twl->irq1, twl); + + return 0; +} + +static void otg_set_vbus_work(struct work_struct *data) +{ + struct twl6030_usb *twl = container_of(data, struct twl6030_usb, + set_vbus_work); + + /* + * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 + * register. This enables boost mode. + */ + + if (twl->vbus_enable) + twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40, + CHARGERUSB_CTRL1); + else + twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00, + CHARGERUSB_CTRL1); +} + +static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled) +{ + struct twl6030_usb *twl = comparator_to_twl(comparator); + + twl->vbus_enable = enabled; + schedule_work(&twl->set_vbus_work); + + return 0; +} + +static int twl6030_usb_probe(struct platform_device *pdev) +{ + u32 ret; + struct twl6030_usb *twl; + int status, err; + struct device_node *np = pdev->dev.of_node; + struct device *dev = &pdev->dev; + struct twl4030_usb_data *pdata = dev->platform_data; + + twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL); + if (!twl) + return -ENOMEM; + + twl->dev = &pdev->dev; + twl->irq1 = platform_get_irq(pdev, 0); + twl->irq2 = platform_get_irq(pdev, 1); + twl->linkstat = OMAP_MUSB_UNKNOWN; + + twl->comparator.set_vbus = twl6030_set_vbus; + twl->comparator.start_srp = twl6030_start_srp; + + ret = omap_usb2_set_comparator(&twl->comparator); + if (ret == -ENODEV) { + dev_info(&pdev->dev, "phy not ready, deferring probe"); + return -EPROBE_DEFER; + } + + if (np) { + twl->regulator = "usb"; + } else if (pdata) { + if (pdata->features & TWL6025_SUBCLASS) + twl->regulator = "ldousb"; + else + twl->regulator = "vusb"; + } else { + dev_err(&pdev->dev, "twl6030 initialized without pdata\n"); + return -EINVAL; + } + + /* init spinlock for workqueue */ + spin_lock_init(&twl->lock); + + err = twl6030_usb_ldo_init(twl); + if (err) { + dev_err(&pdev->dev, "ldo init failed\n"); + return err; + } + + platform_set_drvdata(pdev, twl); + if (device_create_file(&pdev->dev, &dev_attr_vbus)) + dev_warn(&pdev->dev, "could not create sysfs file\n"); + + INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); + + twl->irq_enabled = true; + status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "twl6030_usb", twl); + if (status < 0) { + dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", + twl->irq1, status); + device_remove_file(twl->dev, &dev_attr_vbus); + return status; + } + + status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq, + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, + "twl6030_usb", twl); + if (status < 0) { + dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", + twl->irq2, status); + free_irq(twl->irq1, twl); + device_remove_file(twl->dev, &dev_attr_vbus); + return status; + } + + twl->asleep = 0; + twl6030_enable_irq(twl); + dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); + + return 0; +} + +static int __exit twl6030_usb_remove(struct platform_device *pdev) +{ + struct twl6030_usb *twl = platform_get_drvdata(pdev); + + twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, + REG_INT_MSK_LINE_C); + twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, + REG_INT_MSK_STS_C); + free_irq(twl->irq1, twl); + free_irq(twl->irq2, twl); + regulator_put(twl->usb3v3); + device_remove_file(twl->dev, &dev_attr_vbus); + cancel_work_sync(&twl->set_vbus_work); + + return 0; +} + +#ifdef CONFIG_OF +static const struct of_device_id twl6030_usb_id_table[] = { + { .compatible = "ti,twl6030-usb" }, + {} +}; +MODULE_DEVICE_TABLE(of, twl6030_usb_id_table); +#endif + +static struct platform_driver twl6030_usb_driver = { + .probe = twl6030_usb_probe, + .remove = __exit_p(twl6030_usb_remove), + .driver = { + .name = "twl6030_usb", + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(twl6030_usb_id_table), + }, +}; + +static int __init twl6030_usb_init(void) +{ + return platform_driver_register(&twl6030_usb_driver); +} +subsys_initcall(twl6030_usb_init); + +static void __exit twl6030_usb_exit(void) +{ + platform_driver_unregister(&twl6030_usb_driver); +} +module_exit(twl6030_usb_exit); + +MODULE_ALIAS("platform:twl6030_usb"); +MODULE_AUTHOR("Hema HK "); +MODULE_DESCRIPTION("TWL6030 USB transceiver driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/phy-ulpi-viewport.c b/drivers/usb/phy/phy-ulpi-viewport.c new file mode 100644 index 0000000..c5ba7e5 --- /dev/null +++ b/drivers/usb/phy/phy-ulpi-viewport.c @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2011 Google, Inc. + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include +#include +#include +#include +#include + +#define ULPI_VIEW_WAKEUP (1 << 31) +#define ULPI_VIEW_RUN (1 << 30) +#define ULPI_VIEW_WRITE (1 << 29) +#define ULPI_VIEW_READ (0 << 29) +#define ULPI_VIEW_ADDR(x) (((x) & 0xff) << 16) +#define ULPI_VIEW_DATA_READ(x) (((x) >> 8) & 0xff) +#define ULPI_VIEW_DATA_WRITE(x) ((x) & 0xff) + +static int ulpi_viewport_wait(void __iomem *view, u32 mask) +{ + unsigned long usec = 2000; + + while (usec--) { + if (!(readl(view) & mask)) + return 0; + + udelay(1); + }; + + return -ETIMEDOUT; +} + +static int ulpi_viewport_read(struct usb_phy *otg, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); + ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); + if (ret) + return ret; + + writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view); + ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN); + if (ret) + return ret; + + return ULPI_VIEW_DATA_READ(readl(view)); +} + +static int ulpi_viewport_write(struct usb_phy *otg, u32 val, u32 reg) +{ + int ret; + void __iomem *view = otg->io_priv; + + writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); + ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); + if (ret) + return ret; + + writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) | + ULPI_VIEW_ADDR(reg), view); + + return ulpi_viewport_wait(view, ULPI_VIEW_RUN); +} + +struct usb_phy_io_ops ulpi_viewport_access_ops = { + .read = ulpi_viewport_read, + .write = ulpi_viewport_write, +}; diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c new file mode 100644 index 0000000..217339d --- /dev/null +++ b/drivers/usb/phy/phy-ulpi.c @@ -0,0 +1,283 @@ +/* + * Generic ULPI USB transceiver support + * + * Copyright (C) 2009 Daniel Mack + * + * Based on sources from + * + * Sascha Hauer + * Freescale Semiconductors + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include + + +struct ulpi_info { + unsigned int id; + char *name; +}; + +#define ULPI_ID(vendor, product) (((vendor) << 16) | (product)) +#define ULPI_INFO(_id, _name) \ + { \ + .id = (_id), \ + .name = (_name), \ + } + +/* ULPI hardcoded IDs, used for probing */ +static struct ulpi_info ulpi_ids[] = { + ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), + ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), +}; + +static int ulpi_set_otg_flags(struct usb_phy *phy) +{ + unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN | + ULPI_OTG_CTRL_DM_PULLDOWN; + + if (phy->flags & ULPI_OTG_ID_PULLUP) + flags |= ULPI_OTG_CTRL_ID_PULLUP; + + /* + * ULPI Specification rev.1.1 default + * for Dp/DmPulldown is enabled. + */ + if (phy->flags & ULPI_OTG_DP_PULLDOWN_DIS) + flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN; + + if (phy->flags & ULPI_OTG_DM_PULLDOWN_DIS) + flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN; + + if (phy->flags & ULPI_OTG_EXTVBUSIND) + flags |= ULPI_OTG_CTRL_EXTVBUSIND; + + return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL); +} + +static int ulpi_set_fc_flags(struct usb_phy *phy) +{ + unsigned int flags = 0; + + /* + * ULPI Specification rev.1.1 default + * for XcvrSelect is Full Speed. + */ + if (phy->flags & ULPI_FC_HS) + flags |= ULPI_FUNC_CTRL_HIGH_SPEED; + else if (phy->flags & ULPI_FC_LS) + flags |= ULPI_FUNC_CTRL_LOW_SPEED; + else if (phy->flags & ULPI_FC_FS4LS) + flags |= ULPI_FUNC_CTRL_FS4LS; + else + flags |= ULPI_FUNC_CTRL_FULL_SPEED; + + if (phy->flags & ULPI_FC_TERMSEL) + flags |= ULPI_FUNC_CTRL_TERMSELECT; + + /* + * ULPI Specification rev.1.1 default + * for OpMode is Normal Operation. + */ + if (phy->flags & ULPI_FC_OP_NODRV) + flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; + else if (phy->flags & ULPI_FC_OP_DIS_NRZI) + flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI; + else if (phy->flags & ULPI_FC_OP_NSYNC_NEOP) + flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP; + else + flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + + /* + * ULPI Specification rev.1.1 default + * for SuspendM is Powered. + */ + flags |= ULPI_FUNC_CTRL_SUSPENDM; + + return usb_phy_io_write(phy, flags, ULPI_FUNC_CTRL); +} + +static int ulpi_set_ic_flags(struct usb_phy *phy) +{ + unsigned int flags = 0; + + if (phy->flags & ULPI_IC_AUTORESUME) + flags |= ULPI_IFC_CTRL_AUTORESUME; + + if (phy->flags & ULPI_IC_EXTVBUS_INDINV) + flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS; + + if (phy->flags & ULPI_IC_IND_PASSTHRU) + flags |= ULPI_IFC_CTRL_PASSTHRU; + + if (phy->flags & ULPI_IC_PROTECT_DIS) + flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE; + + return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL); +} + +static int ulpi_set_flags(struct usb_phy *phy) +{ + int ret; + + ret = ulpi_set_otg_flags(phy); + if (ret) + return ret; + + ret = ulpi_set_ic_flags(phy); + if (ret) + return ret; + + return ulpi_set_fc_flags(phy); +} + +static int ulpi_check_integrity(struct usb_phy *phy) +{ + int ret, i; + unsigned int val = 0x55; + + for (i = 0; i < 2; i++) { + ret = usb_phy_io_write(phy, val, ULPI_SCRATCH); + if (ret < 0) + return ret; + + ret = usb_phy_io_read(phy, ULPI_SCRATCH); + if (ret < 0) + return ret; + + if (ret != val) { + pr_err("ULPI integrity check: failed!"); + return -ENODEV; + } + val = val << 1; + } + + pr_info("ULPI integrity check: passed.\n"); + + return 0; +} + +static int ulpi_init(struct usb_phy *phy) +{ + int i, vid, pid, ret; + u32 ulpi_id = 0; + + for (i = 0; i < 4; i++) { + ret = usb_phy_io_read(phy, ULPI_PRODUCT_ID_HIGH - i); + if (ret < 0) + return ret; + ulpi_id = (ulpi_id << 8) | ret; + } + vid = ulpi_id & 0xffff; + pid = ulpi_id >> 16; + + pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid); + + for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) { + if (ulpi_ids[i].id == ULPI_ID(vid, pid)) { + pr_info("Found %s ULPI transceiver.\n", + ulpi_ids[i].name); + break; + } + } + + ret = ulpi_check_integrity(phy); + if (ret) + return ret; + + return ulpi_set_flags(phy); +} + +static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host) +{ + struct usb_phy *phy = otg->phy; + unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL); + + if (!host) { + otg->host = NULL; + return 0; + } + + otg->host = host; + + flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE | + ULPI_IFC_CTRL_3_PIN_SERIAL_MODE | + ULPI_IFC_CTRL_CARKITMODE); + + if (phy->flags & ULPI_IC_6PIN_SERIAL) + flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE; + else if (phy->flags & ULPI_IC_3PIN_SERIAL) + flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE; + else if (phy->flags & ULPI_IC_CARKIT) + flags |= ULPI_IFC_CTRL_CARKITMODE; + + return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL); +} + +static int ulpi_set_vbus(struct usb_otg *otg, bool on) +{ + struct usb_phy *phy = otg->phy; + unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL); + + flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT); + + if (on) { + if (phy->flags & ULPI_OTG_DRVVBUS) + flags |= ULPI_OTG_CTRL_DRVVBUS; + + if (phy->flags & ULPI_OTG_DRVVBUS_EXT) + flags |= ULPI_OTG_CTRL_DRVVBUS_EXT; + } + + return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL); +} + +struct usb_phy * +otg_ulpi_create(struct usb_phy_io_ops *ops, + unsigned int flags) +{ + struct usb_phy *phy; + struct usb_otg *otg; + + phy = kzalloc(sizeof(*phy), GFP_KERNEL); + if (!phy) + return NULL; + + otg = kzalloc(sizeof(*otg), GFP_KERNEL); + if (!otg) { + kfree(phy); + return NULL; + } + + phy->label = "ULPI"; + phy->flags = flags; + phy->io_ops = ops; + phy->otg = otg; + phy->init = ulpi_init; + + otg->phy = phy; + otg->set_host = ulpi_set_host; + otg->set_vbus = ulpi_set_vbus; + + return phy; +} +EXPORT_SYMBOL_GPL(otg_ulpi_create); + diff --git a/drivers/usb/phy/rcar-phy.c b/drivers/usb/phy/rcar-phy.c deleted file mode 100644 index a35681b..0000000 --- a/drivers/usb/phy/rcar-phy.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * Renesas R-Car USB phy driver - * - * Copyright (C) 2012 Renesas Solutions Corp. - * Kuninori Morimoto - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include -#include -#include -#include -#include -#include - -/* USBH common register */ -#define USBPCTRL0 0x0800 -#define USBPCTRL1 0x0804 -#define USBST 0x0808 -#define USBEH0 0x080C -#define USBOH0 0x081C -#define USBCTL0 0x0858 -#define EIIBC1 0x0094 -#define EIIBC2 0x009C - -/* USBPCTRL1 */ -#define PHY_RST (1 << 2) -#define PLL_ENB (1 << 1) -#define PHY_ENB (1 << 0) - -/* USBST */ -#define ST_ACT (1 << 31) -#define ST_PLL (1 << 30) - -struct rcar_usb_phy_priv { - struct usb_phy phy; - spinlock_t lock; - - void __iomem *reg0; - void __iomem *reg1; - int counter; -}; - -#define usb_phy_to_priv(p) container_of(p, struct rcar_usb_phy_priv, phy) - - -/* - * USB initial/install operation. - * - * This function setup USB phy. - * The used value and setting order came from - * [USB :: Initial setting] on datasheet. - */ -static int rcar_usb_phy_init(struct usb_phy *phy) -{ - struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); - struct device *dev = phy->dev; - void __iomem *reg0 = priv->reg0; - void __iomem *reg1 = priv->reg1; - int i; - u32 val; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - if (priv->counter++ == 0) { - - /* - * USB phy start-up - */ - - /* (1) USB-PHY standby release */ - iowrite32(PHY_ENB, (reg0 + USBPCTRL1)); - - /* (2) start USB-PHY internal PLL */ - iowrite32(PHY_ENB | PLL_ENB, (reg0 + USBPCTRL1)); - - /* (3) USB module status check */ - for (i = 0; i < 1024; i++) { - udelay(10); - val = ioread32(reg0 + USBST); - if (val == (ST_ACT | ST_PLL)) - break; - } - - if (val != (ST_ACT | ST_PLL)) { - dev_err(dev, "USB phy not ready\n"); - goto phy_init_end; - } - - /* (4) USB-PHY reset clear */ - iowrite32(PHY_ENB | PLL_ENB | PHY_RST, (reg0 + USBPCTRL1)); - - /* set platform specific port settings */ - iowrite32(0x00000000, (reg0 + USBPCTRL0)); - - /* - * EHCI IP internal buffer setting - * EHCI IP internal buffer enable - * - * These are recommended value of a datasheet - * see [USB :: EHCI internal buffer setting] - */ - iowrite32(0x00ff0040, (reg0 + EIIBC1)); - iowrite32(0x00ff0040, (reg1 + EIIBC1)); - - iowrite32(0x00000001, (reg0 + EIIBC2)); - iowrite32(0x00000001, (reg1 + EIIBC2)); - - /* - * Bus alignment settings - */ - - /* (1) EHCI bus alignment (little endian) */ - iowrite32(0x00000000, (reg0 + USBEH0)); - - /* (1) OHCI bus alignment (little endian) */ - iowrite32(0x00000000, (reg0 + USBOH0)); - } - -phy_init_end: - spin_unlock_irqrestore(&priv->lock, flags); - - return 0; -} - -static void rcar_usb_phy_shutdown(struct usb_phy *phy) -{ - struct rcar_usb_phy_priv *priv = usb_phy_to_priv(phy); - void __iomem *reg0 = priv->reg0; - unsigned long flags; - - spin_lock_irqsave(&priv->lock, flags); - - if (priv->counter-- == 1) { /* last user */ - iowrite32(0x00000000, (reg0 + USBPCTRL0)); - iowrite32(0x00000000, (reg0 + USBPCTRL1)); - } - - spin_unlock_irqrestore(&priv->lock, flags); -} - -static int rcar_usb_phy_probe(struct platform_device *pdev) -{ - struct rcar_usb_phy_priv *priv; - struct resource *res0, *res1; - struct device *dev = &pdev->dev; - void __iomem *reg0, *reg1; - int ret; - - res0 = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res1 = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res0 || !res1) { - dev_err(dev, "Not enough platform resources\n"); - return -EINVAL; - } - - /* - * CAUTION - * - * Because this phy address is also mapped under OHCI/EHCI address area, - * this driver can't use devm_request_and_ioremap(dev, res) here - */ - reg0 = devm_ioremap_nocache(dev, res0->start, resource_size(res0)); - reg1 = devm_ioremap_nocache(dev, res1->start, resource_size(res1)); - if (!reg0 || !reg1) { - dev_err(dev, "ioremap error\n"); - return -ENOMEM; - } - - priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); - if (!priv) { - dev_err(dev, "priv data allocation error\n"); - return -ENOMEM; - } - - priv->reg0 = reg0; - priv->reg1 = reg1; - priv->counter = 0; - priv->phy.dev = dev; - priv->phy.label = dev_name(dev); - priv->phy.init = rcar_usb_phy_init; - priv->phy.shutdown = rcar_usb_phy_shutdown; - spin_lock_init(&priv->lock); - - ret = usb_add_phy(&priv->phy, USB_PHY_TYPE_USB2); - if (ret < 0) { - dev_err(dev, "usb phy addition error\n"); - return ret; - } - - platform_set_drvdata(pdev, priv); - - return ret; -} - -static int rcar_usb_phy_remove(struct platform_device *pdev) -{ - struct rcar_usb_phy_priv *priv = platform_get_drvdata(pdev); - - usb_remove_phy(&priv->phy); - - return 0; -} - -static struct platform_driver rcar_usb_phy_driver = { - .driver = { - .name = "rcar_usb_phy", - }, - .probe = rcar_usb_phy_probe, - .remove = rcar_usb_phy_remove, -}; - -module_platform_driver(rcar_usb_phy_driver); - -MODULE_LICENSE("GPL v2"); -MODULE_DESCRIPTION("Renesas R-Car USB phy"); -MODULE_AUTHOR("Kuninori Morimoto "); diff --git a/drivers/usb/phy/samsung-usbphy.c b/drivers/usb/phy/samsung-usbphy.c deleted file mode 100644 index 967101e..0000000 --- a/drivers/usb/phy/samsung-usbphy.c +++ /dev/null @@ -1,928 +0,0 @@ -/* linux/drivers/usb/phy/samsung-usbphy.c - * - * Copyright (c) 2012 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Author: Praveen Paneri - * - * Samsung USB2.0 PHY transceiver; talks to S3C HS OTG controller, EHCI-S5P and - * OHCI-EXYNOS controllers. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Register definitions */ - -#define SAMSUNG_PHYPWR (0x00) - -#define PHYPWR_NORMAL_MASK (0x19 << 0) -#define PHYPWR_OTG_DISABLE (0x1 << 4) -#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3) -#define PHYPWR_FORCE_SUSPEND (0x1 << 1) -/* For Exynos4 */ -#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0) -#define PHYPWR_SLEEP_PHY0 (0x1 << 5) - -#define SAMSUNG_PHYCLK (0x04) - -#define PHYCLK_MODE_USB11 (0x1 << 6) -#define PHYCLK_EXT_OSC (0x1 << 5) -#define PHYCLK_COMMON_ON_N (0x1 << 4) -#define PHYCLK_ID_PULL (0x1 << 2) -#define PHYCLK_CLKSEL_MASK (0x3 << 0) -#define PHYCLK_CLKSEL_48M (0x0 << 0) -#define PHYCLK_CLKSEL_12M (0x2 << 0) -#define PHYCLK_CLKSEL_24M (0x3 << 0) - -#define SAMSUNG_RSTCON (0x08) - -#define RSTCON_PHYLINK_SWRST (0x1 << 2) -#define RSTCON_HLINK_SWRST (0x1 << 1) -#define RSTCON_SWRST (0x1 << 0) - -/* EXYNOS5 */ -#define EXYNOS5_PHY_HOST_CTRL0 (0x00) - -#define HOST_CTRL0_PHYSWRSTALL (0x1 << 31) - -#define HOST_CTRL0_REFCLKSEL_MASK (0x3 << 19) -#define HOST_CTRL0_REFCLKSEL_XTAL (0x0 << 19) -#define HOST_CTRL0_REFCLKSEL_EXTL (0x1 << 19) -#define HOST_CTRL0_REFCLKSEL_CLKCORE (0x2 << 19) - -#define HOST_CTRL0_FSEL_MASK (0x7 << 16) -#define HOST_CTRL0_FSEL(_x) ((_x) << 16) - -#define FSEL_CLKSEL_50M (0x7) -#define FSEL_CLKSEL_24M (0x5) -#define FSEL_CLKSEL_20M (0x4) -#define FSEL_CLKSEL_19200K (0x3) -#define FSEL_CLKSEL_12M (0x2) -#define FSEL_CLKSEL_10M (0x1) -#define FSEL_CLKSEL_9600K (0x0) - -#define HOST_CTRL0_TESTBURNIN (0x1 << 11) -#define HOST_CTRL0_RETENABLE (0x1 << 10) -#define HOST_CTRL0_COMMONON_N (0x1 << 9) -#define HOST_CTRL0_SIDDQ (0x1 << 6) -#define HOST_CTRL0_FORCESLEEP (0x1 << 5) -#define HOST_CTRL0_FORCESUSPEND (0x1 << 4) -#define HOST_CTRL0_WORDINTERFACE (0x1 << 3) -#define HOST_CTRL0_UTMISWRST (0x1 << 2) -#define HOST_CTRL0_LINKSWRST (0x1 << 1) -#define HOST_CTRL0_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_TUNE0 (0x04) - -#define EXYNOS5_PHY_HSIC_CTRL1 (0x10) - -#define EXYNOS5_PHY_HSIC_TUNE1 (0x14) - -#define EXYNOS5_PHY_HSIC_CTRL2 (0x20) - -#define EXYNOS5_PHY_HSIC_TUNE2 (0x24) - -#define HSIC_CTRL_REFCLKSEL_MASK (0x3 << 23) -#define HSIC_CTRL_REFCLKSEL (0x2 << 23) - -#define HSIC_CTRL_REFCLKDIV_MASK (0x7f << 16) -#define HSIC_CTRL_REFCLKDIV(_x) ((_x) << 16) -#define HSIC_CTRL_REFCLKDIV_12 (0x24 << 16) -#define HSIC_CTRL_REFCLKDIV_15 (0x1c << 16) -#define HSIC_CTRL_REFCLKDIV_16 (0x1a << 16) -#define HSIC_CTRL_REFCLKDIV_19_2 (0x15 << 16) -#define HSIC_CTRL_REFCLKDIV_20 (0x14 << 16) - -#define HSIC_CTRL_SIDDQ (0x1 << 6) -#define HSIC_CTRL_FORCESLEEP (0x1 << 5) -#define HSIC_CTRL_FORCESUSPEND (0x1 << 4) -#define HSIC_CTRL_WORDINTERFACE (0x1 << 3) -#define HSIC_CTRL_UTMISWRST (0x1 << 2) -#define HSIC_CTRL_PHYSWRST (0x1 << 0) - -#define EXYNOS5_PHY_HOST_EHCICTRL (0x30) - -#define HOST_EHCICTRL_ENAINCRXALIGN (0x1 << 29) -#define HOST_EHCICTRL_ENAINCR4 (0x1 << 28) -#define HOST_EHCICTRL_ENAINCR8 (0x1 << 27) -#define HOST_EHCICTRL_ENAINCR16 (0x1 << 26) - -#define EXYNOS5_PHY_HOST_OHCICTRL (0x34) - -#define HOST_OHCICTRL_SUSPLGCY (0x1 << 3) -#define HOST_OHCICTRL_APPSTARTCLK (0x1 << 2) -#define HOST_OHCICTRL_CNTSEL (0x1 << 1) -#define HOST_OHCICTRL_CLKCKTRST (0x1 << 0) - -#define EXYNOS5_PHY_OTG_SYS (0x38) - -#define OTG_SYS_PHYLINK_SWRESET (0x1 << 14) -#define OTG_SYS_LINKSWRST_UOTG (0x1 << 13) -#define OTG_SYS_PHY0_SWRST (0x1 << 12) - -#define OTG_SYS_REFCLKSEL_MASK (0x3 << 9) -#define OTG_SYS_REFCLKSEL_XTAL (0x0 << 9) -#define OTG_SYS_REFCLKSEL_EXTL (0x1 << 9) -#define OTG_SYS_REFCLKSEL_CLKCORE (0x2 << 9) - -#define OTG_SYS_IDPULLUP_UOTG (0x1 << 8) -#define OTG_SYS_COMMON_ON (0x1 << 7) - -#define OTG_SYS_FSEL_MASK (0x7 << 4) -#define OTG_SYS_FSEL(_x) ((_x) << 4) - -#define OTG_SYS_FORCESLEEP (0x1 << 3) -#define OTG_SYS_OTGDISABLE (0x1 << 2) -#define OTG_SYS_SIDDQ_UOTG (0x1 << 1) -#define OTG_SYS_FORCESUSPEND (0x1 << 0) - -#define EXYNOS5_PHY_OTG_TUNE (0x40) - -#ifndef MHZ -#define MHZ (1000*1000) -#endif - -#ifndef KHZ -#define KHZ (1000) -#endif - -#define EXYNOS_USBHOST_PHY_CTRL_OFFSET (0x4) -#define S3C64XX_USBPHY_ENABLE (0x1 << 16) -#define EXYNOS_USBPHY_ENABLE (0x1 << 0) -#define EXYNOS_USB20PHY_CFG_HOST_LINK (0x1 << 0) - -enum samsung_cpu_type { - TYPE_S3C64XX, - TYPE_EXYNOS4210, - TYPE_EXYNOS5250, -}; - -/* - * struct samsung_usbphy_drvdata - driver data for various SoC variants - * @cpu_type: machine identifier - * @devphy_en_mask: device phy enable mask for PHY CONTROL register - * @hostphy_en_mask: host phy enable mask for PHY CONTROL register - * @devphy_reg_offset: offset to DEVICE PHY CONTROL register from - * mapped address of system controller. - * @hostphy_reg_offset: offset to HOST PHY CONTROL register from - * mapped address of system controller. - * - * Here we have a separate mask for device type phy. - * Having different masks for host and device type phy helps - * in setting independent masks in case of SoCs like S5PV210, - * in which PHY0 and PHY1 enable bits belong to same register - * placed at position 0 and 1 respectively. - * Although for newer SoCs like exynos these bits belong to - * different registers altogether placed at position 0. - */ -struct samsung_usbphy_drvdata { - int cpu_type; - int devphy_en_mask; - int hostphy_en_mask; - u32 devphy_reg_offset; - u32 hostphy_reg_offset; -}; - -/* - * struct samsung_usbphy - transceiver driver state - * @phy: transceiver structure - * @plat: platform data - * @dev: The parent device supplied to the probe function - * @clk: usb phy clock - * @regs: usb phy controller registers memory base - * @pmuregs: USB device PHY_CONTROL register memory base - * @sysreg: USB2.0 PHY_CFG register memory base - * @ref_clk_freq: reference clock frequency selection - * @drv_data: driver data available for different SoCs - * @phy_type: Samsung SoCs specific phy types: #HOST - * #DEVICE - * @phy_usage: usage count for phy - * @lock: lock for phy operations - */ -struct samsung_usbphy { - struct usb_phy phy; - struct samsung_usbphy_data *plat; - struct device *dev; - struct clk *clk; - void __iomem *regs; - void __iomem *pmuregs; - void __iomem *sysreg; - int ref_clk_freq; - const struct samsung_usbphy_drvdata *drv_data; - enum samsung_usb_phy_type phy_type; - atomic_t phy_usage; - spinlock_t lock; -}; - -#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy) - -int samsung_usbphy_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - if (!otg->host) - otg->host = host; - - return 0; -} - -static int samsung_usbphy_parse_dt(struct samsung_usbphy *sphy) -{ - struct device_node *usbphy_sys; - - /* Getting node for system controller interface for usb-phy */ - usbphy_sys = of_get_child_by_name(sphy->dev->of_node, "usbphy-sys"); - if (!usbphy_sys) { - dev_err(sphy->dev, "No sys-controller interface for usb-phy\n"); - return -ENODEV; - } - - sphy->pmuregs = of_iomap(usbphy_sys, 0); - - if (sphy->pmuregs == NULL) { - dev_err(sphy->dev, "Can't get usb-phy pmu control register\n"); - goto err0; - } - - sphy->sysreg = of_iomap(usbphy_sys, 1); - - /* - * Not returning error code here, since this situation is not fatal. - * Few SoCs may not have this switch available - */ - if (sphy->sysreg == NULL) - dev_warn(sphy->dev, "Can't get usb-phy sysreg cfg register\n"); - - of_node_put(usbphy_sys); - - return 0; - -err0: - of_node_put(usbphy_sys); - return -ENXIO; -} - -/* - * Set isolation here for phy. - * Here 'on = true' would mean USB PHY block is isolated, hence - * de-activated and vice-versa. - */ -static void samsung_usbphy_set_isolation(struct samsung_usbphy *sphy, bool on) -{ - void __iomem *reg = NULL; - u32 reg_val; - u32 en_mask = 0; - - if (!sphy->pmuregs) { - dev_warn(sphy->dev, "Can't set pmu isolation\n"); - return; - } - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - /* - * Do nothing: We will add here once S3C64xx goes for DT support - */ - break; - case TYPE_EXYNOS4210: - /* - * Fall through since exynos4210 and exynos5250 have similar - * register architecture: two separate registers for host and - * device phy control with enable bit at position 0. - */ - case TYPE_EXYNOS5250: - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) { - reg = sphy->pmuregs + - sphy->drv_data->devphy_reg_offset; - en_mask = sphy->drv_data->devphy_en_mask; - } else if (sphy->phy_type == USB_PHY_TYPE_HOST) { - reg = sphy->pmuregs + - sphy->drv_data->hostphy_reg_offset; - en_mask = sphy->drv_data->hostphy_en_mask; - } - break; - default: - dev_err(sphy->dev, "Invalid SoC type\n"); - return; - } - - reg_val = readl(reg); - - if (on) - reg_val &= ~en_mask; - else - reg_val |= en_mask; - - writel(reg_val, reg); -} - -/* - * Configure the mode of working of usb-phy here: HOST/DEVICE. - */ -static void samsung_usbphy_cfg_sel(struct samsung_usbphy *sphy) -{ - u32 reg; - - if (!sphy->sysreg) { - dev_warn(sphy->dev, "Can't configure specified phy mode\n"); - return; - } - - reg = readl(sphy->sysreg); - - if (sphy->phy_type == USB_PHY_TYPE_DEVICE) - reg &= ~EXYNOS_USB20PHY_CFG_HOST_LINK; - else if (sphy->phy_type == USB_PHY_TYPE_HOST) - reg |= EXYNOS_USB20PHY_CFG_HOST_LINK; - - writel(reg, sphy->sysreg); -} - -/* - * PHYs are different for USB Device and USB Host. - * This make sure that correct PHY type is selected before - * any operation on PHY. - */ -static int samsung_usbphy_set_type(struct usb_phy *phy, - enum samsung_usb_phy_type phy_type) -{ - struct samsung_usbphy *sphy = phy_to_sphy(phy); - - sphy->phy_type = phy_type; - - return 0; -} - -/* - * Returns reference clock frequency selection value - */ -static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy) -{ - struct clk *ref_clk; - int refclk_freq = 0; - - /* - * In exynos5250 USB host and device PHY use - * external crystal clock XXTI - */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - ref_clk = clk_get(sphy->dev, "ext_xtal"); - else - ref_clk = clk_get(sphy->dev, "xusbxti"); - if (IS_ERR(ref_clk)) { - dev_err(sphy->dev, "Failed to get reference clock\n"); - return PTR_ERR(ref_clk); - } - - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) { - /* set clock frequency for PLL */ - switch (clk_get_rate(ref_clk)) { - case 9600 * KHZ: - refclk_freq = FSEL_CLKSEL_9600K; - break; - case 10 * MHZ: - refclk_freq = FSEL_CLKSEL_10M; - break; - case 12 * MHZ: - refclk_freq = FSEL_CLKSEL_12M; - break; - case 19200 * KHZ: - refclk_freq = FSEL_CLKSEL_19200K; - break; - case 20 * MHZ: - refclk_freq = FSEL_CLKSEL_20M; - break; - case 50 * MHZ: - refclk_freq = FSEL_CLKSEL_50M; - break; - case 24 * MHZ: - default: - /* default reference clock */ - refclk_freq = FSEL_CLKSEL_24M; - break; - } - } else { - switch (clk_get_rate(ref_clk)) { - case 12 * MHZ: - refclk_freq = PHYCLK_CLKSEL_12M; - break; - case 24 * MHZ: - refclk_freq = PHYCLK_CLKSEL_24M; - break; - case 48 * MHZ: - refclk_freq = PHYCLK_CLKSEL_48M; - break; - default: - if (sphy->drv_data->cpu_type == TYPE_S3C64XX) - refclk_freq = PHYCLK_CLKSEL_48M; - else - refclk_freq = PHYCLK_CLKSEL_24M; - break; - } - } - clk_put(ref_clk); - - return refclk_freq; -} - -static bool exynos5_phyhost_is_on(void *regs) -{ - u32 reg; - - reg = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - return !(reg & HOST_CTRL0_SIDDQ); -} - -static void samsung_exynos5_usbphy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyclk = sphy->ref_clk_freq; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - u32 ehcictrl; - u32 ohcictrl; - - /* - * phy_usage helps in keeping usage count for phy - * so that the first consumer enabling the phy is also - * the last consumer to disable it. - */ - - atomic_inc(&sphy->phy_usage); - - if (exynos5_phyhost_is_on(regs)) { - dev_info(sphy->dev, "Already power on PHY\n"); - return; - } - - /* Host configuration */ - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - - /* phy reference clock configuration */ - phyhost &= ~HOST_CTRL0_FSEL_MASK; - phyhost |= HOST_CTRL0_FSEL(phyclk); - - /* host phy reset */ - phyhost &= ~(HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL | - HOST_CTRL0_SIDDQ | - /* Enable normal mode of operation */ - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP); - - /* Link reset */ - phyhost |= (HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST | - /* COMMON Block configuration during suspend */ - HOST_CTRL0_COMMONON_N); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - udelay(10); - phyhost &= ~(HOST_CTRL0_LINKSWRST | - HOST_CTRL0_UTMISWRST); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - /* OTG configuration */ - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - - /* phy reference clock configuration */ - phyotg &= ~OTG_SYS_FSEL_MASK; - phyotg |= OTG_SYS_FSEL(phyclk); - - /* Enable normal mode of operation */ - phyotg &= ~(OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP | - OTG_SYS_REFCLKSEL_MASK | - /* COMMON Block configuration during suspend */ - OTG_SYS_COMMON_ON); - - /* OTG phy & link reset */ - phyotg |= (OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET | - OTG_SYS_OTGDISABLE | - /* Set phy refclk */ - OTG_SYS_REFCLKSEL_CLKCORE); - - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - udelay(10); - phyotg &= ~(OTG_SYS_PHY0_SWRST | - OTG_SYS_LINKSWRST_UOTG | - OTG_SYS_PHYLINK_SWRESET); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); - - /* HSIC phy configuration */ - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_PHYSWRST); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - udelay(10); - phyhsic &= ~HSIC_CTRL_PHYSWRST; - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - udelay(80); - - /* enable EHCI DMA burst */ - ehcictrl = readl(regs + EXYNOS5_PHY_HOST_EHCICTRL); - ehcictrl |= (HOST_EHCICTRL_ENAINCRXALIGN | - HOST_EHCICTRL_ENAINCR4 | - HOST_EHCICTRL_ENAINCR8 | - HOST_EHCICTRL_ENAINCR16); - writel(ehcictrl, regs + EXYNOS5_PHY_HOST_EHCICTRL); - - /* set ohci_suspend_on_n */ - ohcictrl = readl(regs + EXYNOS5_PHY_HOST_OHCICTRL); - ohcictrl |= HOST_OHCICTRL_SUSPLGCY; - writel(ohcictrl, regs + EXYNOS5_PHY_HOST_OHCICTRL); -} - -static void samsung_usbphy_enable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - u32 phyclk; - u32 rstcon; - - /* set clock frequency for PLL */ - phyclk = sphy->ref_clk_freq; - phypwr = readl(regs + SAMSUNG_PHYPWR); - rstcon = readl(regs + SAMSUNG_RSTCON); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phyclk &= ~PHYCLK_COMMON_ON_N; - phypwr &= ~PHYPWR_NORMAL_MASK; - rstcon |= RSTCON_SWRST; - break; - case TYPE_EXYNOS4210: - phypwr &= ~PHYPWR_NORMAL_MASK_PHY0; - rstcon |= RSTCON_SWRST; - default: - break; - } - - writel(phyclk, regs + SAMSUNG_PHYCLK); - /* Configure PHY0 for normal operation*/ - writel(phypwr, regs + SAMSUNG_PHYPWR); - /* reset all ports of PHY and Link */ - writel(rstcon, regs + SAMSUNG_RSTCON); - udelay(10); - rstcon &= ~RSTCON_SWRST; - writel(rstcon, regs + SAMSUNG_RSTCON); -} - -static void samsung_exynos5_usbphy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phyhost; - u32 phyotg; - u32 phyhsic; - - if (atomic_dec_return(&sphy->phy_usage) > 0) { - dev_info(sphy->dev, "still being used\n"); - return; - } - - phyhsic = (HSIC_CTRL_REFCLKDIV_12 | - HSIC_CTRL_REFCLKSEL | - HSIC_CTRL_SIDDQ | - HSIC_CTRL_FORCESLEEP | - HSIC_CTRL_FORCESUSPEND); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL1); - writel(phyhsic, regs + EXYNOS5_PHY_HSIC_CTRL2); - - phyhost = readl(regs + EXYNOS5_PHY_HOST_CTRL0); - phyhost |= (HOST_CTRL0_SIDDQ | - HOST_CTRL0_FORCESUSPEND | - HOST_CTRL0_FORCESLEEP | - HOST_CTRL0_PHYSWRST | - HOST_CTRL0_PHYSWRSTALL); - writel(phyhost, regs + EXYNOS5_PHY_HOST_CTRL0); - - phyotg = readl(regs + EXYNOS5_PHY_OTG_SYS); - phyotg |= (OTG_SYS_FORCESUSPEND | - OTG_SYS_SIDDQ_UOTG | - OTG_SYS_FORCESLEEP); - writel(phyotg, regs + EXYNOS5_PHY_OTG_SYS); -} - -static void samsung_usbphy_disable(struct samsung_usbphy *sphy) -{ - void __iomem *regs = sphy->regs; - u32 phypwr; - - phypwr = readl(regs + SAMSUNG_PHYPWR); - - switch (sphy->drv_data->cpu_type) { - case TYPE_S3C64XX: - phypwr |= PHYPWR_NORMAL_MASK; - break; - case TYPE_EXYNOS4210: - phypwr |= PHYPWR_NORMAL_MASK_PHY0; - default: - break; - } - - /* Disable analog and otg block power */ - writel(phypwr, regs + SAMSUNG_PHYPWR); -} - -/* - * The function passed to the usb driver for phy initialization - */ -static int samsung_usbphy_init(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - int ret = 0; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - /* Enable the phy clock */ - ret = clk_prepare_enable(sphy->clk); - if (ret) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return ret; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* Disable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(false); - else - samsung_usbphy_set_isolation(sphy, false); - - /* Selecting Host/OTG mode; After reset USB2.0PHY_CFG: HOST */ - samsung_usbphy_cfg_sel(sphy); - - /* Initialize usb phy registers */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - samsung_exynos5_usbphy_enable(sphy); - else - samsung_usbphy_enable(sphy); - - spin_unlock_irqrestore(&sphy->lock, flags); - - /* Disable the phy clock */ - clk_disable_unprepare(sphy->clk); - - return ret; -} - -/* - * The function passed to the usb driver for phy shutdown - */ -static void samsung_usbphy_shutdown(struct usb_phy *phy) -{ - struct samsung_usbphy *sphy; - struct usb_bus *host = NULL; - unsigned long flags; - - sphy = phy_to_sphy(phy); - - host = phy->otg->host; - - if (clk_prepare_enable(sphy->clk)) { - dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__); - return; - } - - spin_lock_irqsave(&sphy->lock, flags); - - if (host) { - /* setting default phy-type for USB 2.0 */ - if (!strstr(dev_name(host->controller), "ehci") || - !strstr(dev_name(host->controller), "ohci")) - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_HOST); - } else { - samsung_usbphy_set_type(&sphy->phy, USB_PHY_TYPE_DEVICE); - } - - /* De-initialize usb phy registers */ - if (sphy->drv_data->cpu_type == TYPE_EXYNOS5250) - samsung_exynos5_usbphy_disable(sphy); - else - samsung_usbphy_disable(sphy); - - /* Enable phy isolation */ - if (sphy->plat && sphy->plat->pmu_isolation) - sphy->plat->pmu_isolation(true); - else - samsung_usbphy_set_isolation(sphy, true); - - spin_unlock_irqrestore(&sphy->lock, flags); - - clk_disable_unprepare(sphy->clk); -} - -static const struct of_device_id samsung_usbphy_dt_match[]; - -static inline const struct samsung_usbphy_drvdata -*samsung_usbphy_get_driver_data(struct platform_device *pdev) -{ - if (pdev->dev.of_node) { - const struct of_device_id *match; - match = of_match_node(samsung_usbphy_dt_match, - pdev->dev.of_node); - return match->data; - } - - return (struct samsung_usbphy_drvdata *) - platform_get_device_id(pdev)->driver_data; -} - -static int samsung_usbphy_probe(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy; - struct usb_otg *otg; - struct samsung_usbphy_data *pdata = pdev->dev.platform_data; - const struct samsung_usbphy_drvdata *drv_data; - struct device *dev = &pdev->dev; - struct resource *phy_mem; - void __iomem *phy_base; - struct clk *clk; - int ret; - - phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!phy_mem) { - dev_err(dev, "%s: missing mem resource\n", __func__); - return -ENODEV; - } - - phy_base = devm_ioremap_resource(dev, phy_mem); - if (IS_ERR(phy_base)) - return PTR_ERR(phy_base); - - sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL); - if (!sphy) - return -ENOMEM; - - otg = devm_kzalloc(dev, sizeof(*otg), GFP_KERNEL); - if (!otg) - return -ENOMEM; - - drv_data = samsung_usbphy_get_driver_data(pdev); - - if (drv_data->cpu_type == TYPE_EXYNOS5250) - clk = devm_clk_get(dev, "usbhost"); - else - clk = devm_clk_get(dev, "otg"); - - if (IS_ERR(clk)) { - dev_err(dev, "Failed to get otg clock\n"); - return PTR_ERR(clk); - } - - sphy->dev = dev; - - if (dev->of_node) { - ret = samsung_usbphy_parse_dt(sphy); - if (ret < 0) - return ret; - } else { - if (!pdata) { - dev_err(dev, "no platform data specified\n"); - return -EINVAL; - } - } - - sphy->plat = pdata; - sphy->regs = phy_base; - sphy->clk = clk; - sphy->drv_data = drv_data; - sphy->phy.dev = sphy->dev; - sphy->phy.label = "samsung-usbphy"; - sphy->phy.init = samsung_usbphy_init; - sphy->phy.shutdown = samsung_usbphy_shutdown; - sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy); - - sphy->phy.otg = otg; - sphy->phy.otg->phy = &sphy->phy; - sphy->phy.otg->set_host = samsung_usbphy_set_host; - - spin_lock_init(&sphy->lock); - - platform_set_drvdata(pdev, sphy); - - return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2); -} - -static int samsung_usbphy_remove(struct platform_device *pdev) -{ - struct samsung_usbphy *sphy = platform_get_drvdata(pdev); - - usb_remove_phy(&sphy->phy); - - if (sphy->pmuregs) - iounmap(sphy->pmuregs); - if (sphy->sysreg) - iounmap(sphy->sysreg); - - return 0; -} - -static const struct samsung_usbphy_drvdata usbphy_s3c64xx = { - .cpu_type = TYPE_S3C64XX, - .devphy_en_mask = S3C64XX_USBPHY_ENABLE, -}; - -static const struct samsung_usbphy_drvdata usbphy_exynos4 = { - .cpu_type = TYPE_EXYNOS4210, - .devphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, -}; - -static struct samsung_usbphy_drvdata usbphy_exynos5 = { - .cpu_type = TYPE_EXYNOS5250, - .hostphy_en_mask = EXYNOS_USBPHY_ENABLE, - .hostphy_reg_offset = EXYNOS_USBHOST_PHY_CTRL_OFFSET, -}; - -#ifdef CONFIG_OF -static const struct of_device_id samsung_usbphy_dt_match[] = { - { - .compatible = "samsung,s3c64xx-usbphy", - .data = &usbphy_s3c64xx, - }, { - .compatible = "samsung,exynos4210-usbphy", - .data = &usbphy_exynos4, - }, { - .compatible = "samsung,exynos5250-usbphy", - .data = &usbphy_exynos5 - }, - {}, -}; -MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match); -#endif - -static struct platform_device_id samsung_usbphy_driver_ids[] = { - { - .name = "s3c64xx-usbphy", - .driver_data = (unsigned long)&usbphy_s3c64xx, - }, { - .name = "exynos4210-usbphy", - .driver_data = (unsigned long)&usbphy_exynos4, - }, { - .name = "exynos5250-usbphy", - .driver_data = (unsigned long)&usbphy_exynos5, - }, - {}, -}; - -MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids); - -static struct platform_driver samsung_usbphy_driver = { - .probe = samsung_usbphy_probe, - .remove = samsung_usbphy_remove, - .id_table = samsung_usbphy_driver_ids, - .driver = { - .name = "samsung-usbphy", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(samsung_usbphy_dt_match), - }, -}; - -module_platform_driver(samsung_usbphy_driver); - -MODULE_DESCRIPTION("Samsung USB phy controller"); -MODULE_AUTHOR("Praveen Paneri "); -MODULE_LICENSE("GPL"); -MODULE_ALIAS("platform:samsung-usbphy"); diff --git a/drivers/usb/phy/tegra_usb_phy.c b/drivers/usb/phy/tegra_usb_phy.c deleted file mode 100644 index 5487d38..0000000 --- a/drivers/usb/phy/tegra_usb_phy.c +++ /dev/null @@ -1,798 +0,0 @@ -/* - * Copyright (C) 2010 Google, Inc. - * - * Author: - * Erik Gilling - * Benoit Goby - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#define TEGRA_USB_BASE 0xC5000000 -#define TEGRA_USB_SIZE SZ_16K - -#define ULPI_VIEWPORT 0x170 - -#define USB_SUSP_CTRL 0x400 -#define USB_WAKE_ON_CNNT_EN_DEV (1 << 3) -#define USB_WAKE_ON_DISCON_EN_DEV (1 << 4) -#define USB_SUSP_CLR (1 << 5) -#define USB_PHY_CLK_VALID (1 << 7) -#define UTMIP_RESET (1 << 11) -#define UHSIC_RESET (1 << 11) -#define UTMIP_PHY_ENABLE (1 << 12) -#define ULPI_PHY_ENABLE (1 << 13) -#define USB_SUSP_SET (1 << 14) -#define USB_WAKEUP_DEBOUNCE_COUNT(x) (((x) & 0x7) << 16) - -#define USB1_LEGACY_CTRL 0x410 -#define USB1_NO_LEGACY_MODE (1 << 0) -#define USB1_VBUS_SENSE_CTL_MASK (3 << 1) -#define USB1_VBUS_SENSE_CTL_VBUS_WAKEUP (0 << 1) -#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD_OR_VBUS_WAKEUP \ - (1 << 1) -#define USB1_VBUS_SENSE_CTL_AB_SESS_VLD (2 << 1) -#define USB1_VBUS_SENSE_CTL_A_SESS_VLD (3 << 1) - -#define ULPI_TIMING_CTRL_0 0x424 -#define ULPI_OUTPUT_PINMUX_BYP (1 << 10) -#define ULPI_CLKOUT_PINMUX_BYP (1 << 11) - -#define ULPI_TIMING_CTRL_1 0x428 -#define ULPI_DATA_TRIMMER_LOAD (1 << 0) -#define ULPI_DATA_TRIMMER_SEL(x) (((x) & 0x7) << 1) -#define ULPI_STPDIRNXT_TRIMMER_LOAD (1 << 16) -#define ULPI_STPDIRNXT_TRIMMER_SEL(x) (((x) & 0x7) << 17) -#define ULPI_DIR_TRIMMER_LOAD (1 << 24) -#define ULPI_DIR_TRIMMER_SEL(x) (((x) & 0x7) << 25) - -#define UTMIP_PLL_CFG1 0x804 -#define UTMIP_XTAL_FREQ_COUNT(x) (((x) & 0xfff) << 0) -#define UTMIP_PLLU_ENABLE_DLY_COUNT(x) (((x) & 0x1f) << 27) - -#define UTMIP_XCVR_CFG0 0x808 -#define UTMIP_XCVR_SETUP(x) (((x) & 0xf) << 0) -#define UTMIP_XCVR_LSRSLEW(x) (((x) & 0x3) << 8) -#define UTMIP_XCVR_LSFSLEW(x) (((x) & 0x3) << 10) -#define UTMIP_FORCE_PD_POWERDOWN (1 << 14) -#define UTMIP_FORCE_PD2_POWERDOWN (1 << 16) -#define UTMIP_FORCE_PDZI_POWERDOWN (1 << 18) -#define UTMIP_XCVR_HSSLEW_MSB(x) (((x) & 0x7f) << 25) - -#define UTMIP_BIAS_CFG0 0x80c -#define UTMIP_OTGPD (1 << 11) -#define UTMIP_BIASPD (1 << 10) - -#define UTMIP_HSRX_CFG0 0x810 -#define UTMIP_ELASTIC_LIMIT(x) (((x) & 0x1f) << 10) -#define UTMIP_IDLE_WAIT(x) (((x) & 0x1f) << 15) - -#define UTMIP_HSRX_CFG1 0x814 -#define UTMIP_HS_SYNC_START_DLY(x) (((x) & 0x1f) << 1) - -#define UTMIP_TX_CFG0 0x820 -#define UTMIP_FS_PREABMLE_J (1 << 19) -#define UTMIP_HS_DISCON_DISABLE (1 << 8) - -#define UTMIP_MISC_CFG0 0x824 -#define UTMIP_DPDM_OBSERVE (1 << 26) -#define UTMIP_DPDM_OBSERVE_SEL(x) (((x) & 0xf) << 27) -#define UTMIP_DPDM_OBSERVE_SEL_FS_J UTMIP_DPDM_OBSERVE_SEL(0xf) -#define UTMIP_DPDM_OBSERVE_SEL_FS_K UTMIP_DPDM_OBSERVE_SEL(0xe) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE1 UTMIP_DPDM_OBSERVE_SEL(0xd) -#define UTMIP_DPDM_OBSERVE_SEL_FS_SE0 UTMIP_DPDM_OBSERVE_SEL(0xc) -#define UTMIP_SUSPEND_EXIT_ON_EDGE (1 << 22) - -#define UTMIP_MISC_CFG1 0x828 -#define UTMIP_PLL_ACTIVE_DLY_COUNT(x) (((x) & 0x1f) << 18) -#define UTMIP_PLLU_STABLE_COUNT(x) (((x) & 0xfff) << 6) - -#define UTMIP_DEBOUNCE_CFG0 0x82c -#define UTMIP_BIAS_DEBOUNCE_A(x) (((x) & 0xffff) << 0) - -#define UTMIP_BAT_CHRG_CFG0 0x830 -#define UTMIP_PD_CHRG (1 << 0) - -#define UTMIP_SPARE_CFG0 0x834 -#define FUSE_SETUP_SEL (1 << 3) - -#define UTMIP_XCVR_CFG1 0x838 -#define UTMIP_FORCE_PDDISC_POWERDOWN (1 << 0) -#define UTMIP_FORCE_PDCHRP_POWERDOWN (1 << 2) -#define UTMIP_FORCE_PDDR_POWERDOWN (1 << 4) -#define UTMIP_XCVR_TERM_RANGE_ADJ(x) (((x) & 0xf) << 18) - -#define UTMIP_BIAS_CFG1 0x83c -#define UTMIP_BIAS_PDTRK_COUNT(x) (((x) & 0x1f) << 3) - -static DEFINE_SPINLOCK(utmip_pad_lock); -static int utmip_pad_count; - -struct tegra_xtal_freq { - int freq; - u8 enable_delay; - u8 stable_count; - u8 active_delay; - u8 xtal_freq_count; - u16 debounce; -}; - -static const struct tegra_xtal_freq tegra_freq_table[] = { - { - .freq = 12000000, - .enable_delay = 0x02, - .stable_count = 0x2F, - .active_delay = 0x04, - .xtal_freq_count = 0x76, - .debounce = 0x7530, - }, - { - .freq = 13000000, - .enable_delay = 0x02, - .stable_count = 0x33, - .active_delay = 0x05, - .xtal_freq_count = 0x7F, - .debounce = 0x7EF4, - }, - { - .freq = 19200000, - .enable_delay = 0x03, - .stable_count = 0x4B, - .active_delay = 0x06, - .xtal_freq_count = 0xBB, - .debounce = 0xBB80, - }, - { - .freq = 26000000, - .enable_delay = 0x04, - .stable_count = 0x66, - .active_delay = 0x09, - .xtal_freq_count = 0xFE, - .debounce = 0xFDE8, - }, -}; - -static struct tegra_utmip_config utmip_default[] = { - [0] = { - .hssync_start_delay = 9, - .idle_wait_delay = 17, - .elastic_limit = 16, - .term_range_adj = 6, - .xcvr_setup = 9, - .xcvr_lsfslew = 1, - .xcvr_lsrslew = 1, - }, - [2] = { - .hssync_start_delay = 9, - .idle_wait_delay = 17, - .elastic_limit = 16, - .term_range_adj = 6, - .xcvr_setup = 9, - .xcvr_lsfslew = 2, - .xcvr_lsrslew = 2, - }, -}; - -static int utmip_pad_open(struct tegra_usb_phy *phy) -{ - phy->pad_clk = clk_get_sys("utmip-pad", NULL); - if (IS_ERR(phy->pad_clk)) { - pr_err("%s: can't get utmip pad clock\n", __func__); - return PTR_ERR(phy->pad_clk); - } - - if (phy->is_legacy_phy) { - phy->pad_regs = phy->regs; - } else { - phy->pad_regs = ioremap(TEGRA_USB_BASE, TEGRA_USB_SIZE); - if (!phy->pad_regs) { - pr_err("%s: can't remap usb registers\n", __func__); - clk_put(phy->pad_clk); - return -ENOMEM; - } - } - return 0; -} - -static void utmip_pad_close(struct tegra_usb_phy *phy) -{ - if (!phy->is_legacy_phy) - iounmap(phy->pad_regs); - clk_put(phy->pad_clk); -} - -static void utmip_pad_power_on(struct tegra_usb_phy *phy) -{ - unsigned long val, flags; - void __iomem *base = phy->pad_regs; - - clk_prepare_enable(phy->pad_clk); - - spin_lock_irqsave(&utmip_pad_lock, flags); - - if (utmip_pad_count++ == 0) { - val = readl(base + UTMIP_BIAS_CFG0); - val &= ~(UTMIP_OTGPD | UTMIP_BIASPD); - writel(val, base + UTMIP_BIAS_CFG0); - } - - spin_unlock_irqrestore(&utmip_pad_lock, flags); - - clk_disable_unprepare(phy->pad_clk); -} - -static int utmip_pad_power_off(struct tegra_usb_phy *phy) -{ - unsigned long val, flags; - void __iomem *base = phy->pad_regs; - - if (!utmip_pad_count) { - pr_err("%s: utmip pad already powered off\n", __func__); - return -EINVAL; - } - - clk_prepare_enable(phy->pad_clk); - - spin_lock_irqsave(&utmip_pad_lock, flags); - - if (--utmip_pad_count == 0) { - val = readl(base + UTMIP_BIAS_CFG0); - val |= UTMIP_OTGPD | UTMIP_BIASPD; - writel(val, base + UTMIP_BIAS_CFG0); - } - - spin_unlock_irqrestore(&utmip_pad_lock, flags); - - clk_disable_unprepare(phy->pad_clk); - - return 0; -} - -static int utmi_wait_register(void __iomem *reg, u32 mask, u32 result) -{ - unsigned long timeout = 2000; - do { - if ((readl(reg) & mask) == result) - return 0; - udelay(1); - timeout--; - } while (timeout); - return -1; -} - -static void utmi_phy_clk_disable(struct tegra_usb_phy *phy) -{ - unsigned long val; - void __iomem *base = phy->regs; - - if (phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); - val |= USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); - - udelay(10); - - val = readl(base + USB_SUSP_CTRL); - val &= ~USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); - } else - tegra_ehci_set_phcd(&phy->u_phy, true); - - if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, 0) < 0) - pr_err("%s: timeout waiting for phy to stabilize\n", __func__); -} - -static void utmi_phy_clk_enable(struct tegra_usb_phy *phy) -{ - unsigned long val; - void __iomem *base = phy->regs; - - if (phy->is_legacy_phy) { - val = readl(base + USB_SUSP_CTRL); - val |= USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - - udelay(10); - - val = readl(base + USB_SUSP_CTRL); - val &= ~USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - } else - tegra_ehci_set_phcd(&phy->u_phy, false); - - if (utmi_wait_register(base + USB_SUSP_CTRL, USB_PHY_CLK_VALID, - USB_PHY_CLK_VALID)) - pr_err("%s: timeout waiting for phy to stabilize\n", __func__); -} - -static int utmi_phy_power_on(struct tegra_usb_phy *phy) -{ - unsigned long val; - void __iomem *base = phy->regs; - struct tegra_utmip_config *config = phy->config; - - val = readl(base + USB_SUSP_CTRL); - val |= UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); - - if (phy->is_legacy_phy) { - val = readl(base + USB1_LEGACY_CTRL); - val |= USB1_NO_LEGACY_MODE; - writel(val, base + USB1_LEGACY_CTRL); - } - - val = readl(base + UTMIP_TX_CFG0); - val &= ~UTMIP_FS_PREABMLE_J; - writel(val, base + UTMIP_TX_CFG0); - - val = readl(base + UTMIP_HSRX_CFG0); - val &= ~(UTMIP_IDLE_WAIT(~0) | UTMIP_ELASTIC_LIMIT(~0)); - val |= UTMIP_IDLE_WAIT(config->idle_wait_delay); - val |= UTMIP_ELASTIC_LIMIT(config->elastic_limit); - writel(val, base + UTMIP_HSRX_CFG0); - - val = readl(base + UTMIP_HSRX_CFG1); - val &= ~UTMIP_HS_SYNC_START_DLY(~0); - val |= UTMIP_HS_SYNC_START_DLY(config->hssync_start_delay); - writel(val, base + UTMIP_HSRX_CFG1); - - val = readl(base + UTMIP_DEBOUNCE_CFG0); - val &= ~UTMIP_BIAS_DEBOUNCE_A(~0); - val |= UTMIP_BIAS_DEBOUNCE_A(phy->freq->debounce); - writel(val, base + UTMIP_DEBOUNCE_CFG0); - - val = readl(base + UTMIP_MISC_CFG0); - val &= ~UTMIP_SUSPEND_EXIT_ON_EDGE; - writel(val, base + UTMIP_MISC_CFG0); - - val = readl(base + UTMIP_MISC_CFG1); - val &= ~(UTMIP_PLL_ACTIVE_DLY_COUNT(~0) | UTMIP_PLLU_STABLE_COUNT(~0)); - val |= UTMIP_PLL_ACTIVE_DLY_COUNT(phy->freq->active_delay) | - UTMIP_PLLU_STABLE_COUNT(phy->freq->stable_count); - writel(val, base + UTMIP_MISC_CFG1); - - val = readl(base + UTMIP_PLL_CFG1); - val &= ~(UTMIP_XTAL_FREQ_COUNT(~0) | UTMIP_PLLU_ENABLE_DLY_COUNT(~0)); - val |= UTMIP_XTAL_FREQ_COUNT(phy->freq->xtal_freq_count) | - UTMIP_PLLU_ENABLE_DLY_COUNT(phy->freq->enable_delay); - writel(val, base + UTMIP_PLL_CFG1); - - if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { - val = readl(base + USB_SUSP_CTRL); - val &= ~(USB_WAKE_ON_CNNT_EN_DEV | USB_WAKE_ON_DISCON_EN_DEV); - writel(val, base + USB_SUSP_CTRL); - } - - utmip_pad_power_on(phy); - - val = readl(base + UTMIP_XCVR_CFG0); - val &= ~(UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | - UTMIP_FORCE_PDZI_POWERDOWN | UTMIP_XCVR_SETUP(~0) | - UTMIP_XCVR_LSFSLEW(~0) | UTMIP_XCVR_LSRSLEW(~0) | - UTMIP_XCVR_HSSLEW_MSB(~0)); - val |= UTMIP_XCVR_SETUP(config->xcvr_setup); - val |= UTMIP_XCVR_LSFSLEW(config->xcvr_lsfslew); - val |= UTMIP_XCVR_LSRSLEW(config->xcvr_lsrslew); - writel(val, base + UTMIP_XCVR_CFG0); - - val = readl(base + UTMIP_XCVR_CFG1); - val &= ~(UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | - UTMIP_FORCE_PDDR_POWERDOWN | UTMIP_XCVR_TERM_RANGE_ADJ(~0)); - val |= UTMIP_XCVR_TERM_RANGE_ADJ(config->term_range_adj); - writel(val, base + UTMIP_XCVR_CFG1); - - val = readl(base + UTMIP_BAT_CHRG_CFG0); - val &= ~UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); - - val = readl(base + UTMIP_BIAS_CFG1); - val &= ~UTMIP_BIAS_PDTRK_COUNT(~0); - val |= UTMIP_BIAS_PDTRK_COUNT(0x5); - writel(val, base + UTMIP_BIAS_CFG1); - - if (phy->is_legacy_phy) { - val = readl(base + UTMIP_SPARE_CFG0); - if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) - val &= ~FUSE_SETUP_SEL; - else - val |= FUSE_SETUP_SEL; - writel(val, base + UTMIP_SPARE_CFG0); - } else { - val = readl(base + USB_SUSP_CTRL); - val |= UTMIP_PHY_ENABLE; - writel(val, base + USB_SUSP_CTRL); - } - - val = readl(base + USB_SUSP_CTRL); - val &= ~UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); - - if (phy->is_legacy_phy) { - val = readl(base + USB1_LEGACY_CTRL); - val &= ~USB1_VBUS_SENSE_CTL_MASK; - val |= USB1_VBUS_SENSE_CTL_A_SESS_VLD; - writel(val, base + USB1_LEGACY_CTRL); - - val = readl(base + USB_SUSP_CTRL); - val &= ~USB_SUSP_SET; - writel(val, base + USB_SUSP_CTRL); - } - - utmi_phy_clk_enable(phy); - - if (!phy->is_legacy_phy) - tegra_ehci_set_pts(&phy->u_phy, 0); - - return 0; -} - -static int utmi_phy_power_off(struct tegra_usb_phy *phy) -{ - unsigned long val; - void __iomem *base = phy->regs; - - utmi_phy_clk_disable(phy); - - if (phy->mode == TEGRA_USB_PHY_MODE_DEVICE) { - val = readl(base + USB_SUSP_CTRL); - val &= ~USB_WAKEUP_DEBOUNCE_COUNT(~0); - val |= USB_WAKE_ON_CNNT_EN_DEV | USB_WAKEUP_DEBOUNCE_COUNT(5); - writel(val, base + USB_SUSP_CTRL); - } - - val = readl(base + USB_SUSP_CTRL); - val |= UTMIP_RESET; - writel(val, base + USB_SUSP_CTRL); - - val = readl(base + UTMIP_BAT_CHRG_CFG0); - val |= UTMIP_PD_CHRG; - writel(val, base + UTMIP_BAT_CHRG_CFG0); - - val = readl(base + UTMIP_XCVR_CFG0); - val |= UTMIP_FORCE_PD_POWERDOWN | UTMIP_FORCE_PD2_POWERDOWN | - UTMIP_FORCE_PDZI_POWERDOWN; - writel(val, base + UTMIP_XCVR_CFG0); - - val = readl(base + UTMIP_XCVR_CFG1); - val |= UTMIP_FORCE_PDDISC_POWERDOWN | UTMIP_FORCE_PDCHRP_POWERDOWN | - UTMIP_FORCE_PDDR_POWERDOWN; - writel(val, base + UTMIP_XCVR_CFG1); - - return utmip_pad_power_off(phy); -} - -static void utmi_phy_preresume(struct tegra_usb_phy *phy) -{ - unsigned long val; - void __iomem *base = phy->regs; - - val = readl(base + UTMIP_TX_CFG0); - val |= UTMIP_HS_DISCON_DISABLE; - writel(val, base + UTMIP_TX_CFG0); -} - -static void utmi_phy_postresume(struct tegra_usb_phy *phy) -{ - unsigned long val; - void __iomem *base = phy->regs; - - val = readl(base + UTMIP_TX_CFG0); - val &= ~UTMIP_HS_DISCON_DISABLE; - writel(val, base + UTMIP_TX_CFG0); -} - -static void utmi_phy_restore_start(struct tegra_usb_phy *phy, - enum tegra_usb_phy_port_speed port_speed) -{ - unsigned long val; - void __iomem *base = phy->regs; - - val = readl(base + UTMIP_MISC_CFG0); - val &= ~UTMIP_DPDM_OBSERVE_SEL(~0); - if (port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) - val |= UTMIP_DPDM_OBSERVE_SEL_FS_K; - else - val |= UTMIP_DPDM_OBSERVE_SEL_FS_J; - writel(val, base + UTMIP_MISC_CFG0); - udelay(1); - - val = readl(base + UTMIP_MISC_CFG0); - val |= UTMIP_DPDM_OBSERVE; - writel(val, base + UTMIP_MISC_CFG0); - udelay(10); -} - -static void utmi_phy_restore_end(struct tegra_usb_phy *phy) -{ - unsigned long val; - void __iomem *base = phy->regs; - - val = readl(base + UTMIP_MISC_CFG0); - val &= ~UTMIP_DPDM_OBSERVE; - writel(val, base + UTMIP_MISC_CFG0); - udelay(10); -} - -static int ulpi_phy_power_on(struct tegra_usb_phy *phy) -{ - int ret; - unsigned long val; - void __iomem *base = phy->regs; - struct tegra_ulpi_config *config = phy->config; - - gpio_direction_output(config->reset_gpio, 0); - msleep(5); - gpio_direction_output(config->reset_gpio, 1); - - clk_prepare_enable(phy->clk); - msleep(1); - - val = readl(base + USB_SUSP_CTRL); - val |= UHSIC_RESET; - writel(val, base + USB_SUSP_CTRL); - - val = readl(base + ULPI_TIMING_CTRL_0); - val |= ULPI_OUTPUT_PINMUX_BYP | ULPI_CLKOUT_PINMUX_BYP; - writel(val, base + ULPI_TIMING_CTRL_0); - - val = readl(base + USB_SUSP_CTRL); - val |= ULPI_PHY_ENABLE; - writel(val, base + USB_SUSP_CTRL); - - val = 0; - writel(val, base + ULPI_TIMING_CTRL_1); - - val |= ULPI_DATA_TRIMMER_SEL(4); - val |= ULPI_STPDIRNXT_TRIMMER_SEL(4); - val |= ULPI_DIR_TRIMMER_SEL(4); - writel(val, base + ULPI_TIMING_CTRL_1); - udelay(10); - - val |= ULPI_DATA_TRIMMER_LOAD; - val |= ULPI_STPDIRNXT_TRIMMER_LOAD; - val |= ULPI_DIR_TRIMMER_LOAD; - writel(val, base + ULPI_TIMING_CTRL_1); - - /* Fix VbusInvalid due to floating VBUS */ - ret = usb_phy_io_write(phy->ulpi, 0x40, 0x08); - if (ret) { - pr_err("%s: ulpi write failed\n", __func__); - return ret; - } - - ret = usb_phy_io_write(phy->ulpi, 0x80, 0x0B); - if (ret) { - pr_err("%s: ulpi write failed\n", __func__); - return ret; - } - - val = readl(base + USB_SUSP_CTRL); - val |= USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - udelay(100); - - val = readl(base + USB_SUSP_CTRL); - val &= ~USB_SUSP_CLR; - writel(val, base + USB_SUSP_CTRL); - - return 0; -} - -static int ulpi_phy_power_off(struct tegra_usb_phy *phy) -{ - struct tegra_ulpi_config *config = phy->config; - - clk_disable(phy->clk); - return gpio_direction_output(config->reset_gpio, 0); -} - -static int tegra_phy_init(struct usb_phy *x) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - struct tegra_ulpi_config *ulpi_config; - int err; - - if (phy->is_ulpi_phy) { - ulpi_config = phy->config; - phy->clk = clk_get_sys(NULL, ulpi_config->clk); - if (IS_ERR(phy->clk)) { - pr_err("%s: can't get ulpi clock\n", __func__); - err = -ENXIO; - goto err1; - } - if (!gpio_is_valid(ulpi_config->reset_gpio)) - ulpi_config->reset_gpio = - of_get_named_gpio(phy->dev->of_node, - "nvidia,phy-reset-gpio", 0); - if (!gpio_is_valid(ulpi_config->reset_gpio)) { - pr_err("%s: invalid reset gpio: %d\n", __func__, - ulpi_config->reset_gpio); - err = -EINVAL; - goto err1; - } - gpio_request(ulpi_config->reset_gpio, "ulpi_phy_reset_b"); - gpio_direction_output(ulpi_config->reset_gpio, 0); - phy->ulpi = otg_ulpi_create(&ulpi_viewport_access_ops, 0); - phy->ulpi->io_priv = phy->regs + ULPI_VIEWPORT; - } else { - err = utmip_pad_open(phy); - if (err < 0) - goto err1; - } - return 0; -err1: - clk_disable_unprepare(phy->pll_u); - clk_put(phy->pll_u); - return err; -} - -static void tegra_usb_phy_close(struct usb_phy *x) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - - if (phy->is_ulpi_phy) - clk_put(phy->clk); - else - utmip_pad_close(phy); - clk_disable_unprepare(phy->pll_u); - clk_put(phy->pll_u); - kfree(phy); -} - -static int tegra_usb_phy_power_on(struct tegra_usb_phy *phy) -{ - if (phy->is_ulpi_phy) - return ulpi_phy_power_on(phy); - else - return utmi_phy_power_on(phy); -} - -static int tegra_usb_phy_power_off(struct tegra_usb_phy *phy) -{ - if (phy->is_ulpi_phy) - return ulpi_phy_power_off(phy); - else - return utmi_phy_power_off(phy); -} - -static int tegra_usb_phy_suspend(struct usb_phy *x, int suspend) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - if (suspend) - return tegra_usb_phy_power_off(phy); - else - return tegra_usb_phy_power_on(phy); -} - -struct tegra_usb_phy *tegra_usb_phy_open(struct device *dev, int instance, - void __iomem *regs, void *config, enum tegra_usb_phy_mode phy_mode) -{ - struct tegra_usb_phy *phy; - unsigned long parent_rate; - int i; - int err; - struct device_node *np = dev->of_node; - - phy = kzalloc(sizeof(struct tegra_usb_phy), GFP_KERNEL); - if (!phy) - return ERR_PTR(-ENOMEM); - - phy->instance = instance; - phy->regs = regs; - phy->config = config; - phy->mode = phy_mode; - phy->dev = dev; - phy->is_legacy_phy = - of_property_read_bool(np, "nvidia,has-legacy-mode"); - err = of_property_match_string(np, "phy_type", "ulpi"); - if (err < 0) - phy->is_ulpi_phy = false; - else - phy->is_ulpi_phy = true; - - if (!phy->config) { - if (phy->is_ulpi_phy) { - pr_err("%s: ulpi phy configuration missing", __func__); - err = -EINVAL; - goto err0; - } else { - phy->config = &utmip_default[instance]; - } - } - - phy->pll_u = clk_get_sys(NULL, "pll_u"); - if (IS_ERR(phy->pll_u)) { - pr_err("Can't get pll_u clock\n"); - err = PTR_ERR(phy->pll_u); - goto err0; - } - clk_prepare_enable(phy->pll_u); - - parent_rate = clk_get_rate(clk_get_parent(phy->pll_u)); - for (i = 0; i < ARRAY_SIZE(tegra_freq_table); i++) { - if (tegra_freq_table[i].freq == parent_rate) { - phy->freq = &tegra_freq_table[i]; - break; - } - } - if (!phy->freq) { - pr_err("invalid pll_u parent rate %ld\n", parent_rate); - err = -EINVAL; - goto err1; - } - - phy->u_phy.init = tegra_phy_init; - phy->u_phy.shutdown = tegra_usb_phy_close; - phy->u_phy.set_suspend = tegra_usb_phy_suspend; - - return phy; - -err1: - clk_disable_unprepare(phy->pll_u); - clk_put(phy->pll_u); -err0: - kfree(phy); - return ERR_PTR(err); -} -EXPORT_SYMBOL_GPL(tegra_usb_phy_open); - -void tegra_usb_phy_preresume(struct usb_phy *x) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - - if (!phy->is_ulpi_phy) - utmi_phy_preresume(phy); -} -EXPORT_SYMBOL_GPL(tegra_usb_phy_preresume); - -void tegra_usb_phy_postresume(struct usb_phy *x) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - - if (!phy->is_ulpi_phy) - utmi_phy_postresume(phy); -} -EXPORT_SYMBOL_GPL(tegra_usb_phy_postresume); - -void tegra_ehci_phy_restore_start(struct usb_phy *x, - enum tegra_usb_phy_port_speed port_speed) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - - if (!phy->is_ulpi_phy) - utmi_phy_restore_start(phy, port_speed); -} -EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_start); - -void tegra_ehci_phy_restore_end(struct usb_phy *x) -{ - struct tegra_usb_phy *phy = container_of(x, struct tegra_usb_phy, u_phy); - - if (!phy->is_ulpi_phy) - utmi_phy_restore_end(phy); -} -EXPORT_SYMBOL_GPL(tegra_ehci_phy_restore_end); - diff --git a/drivers/usb/phy/twl4030-usb.c b/drivers/usb/phy/twl4030-usb.c deleted file mode 100644 index a994715..0000000 --- a/drivers/usb/phy/twl4030-usb.c +++ /dev/null @@ -1,728 +0,0 @@ -/* - * twl4030_usb - TWL4030 USB transceiver, talking to OMAP OTG controller - * - * Copyright (C) 2004-2007 Texas Instruments - * Copyright (C) 2008 Nokia Corporation - * Contact: Felipe Balbi - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * Current status: - * - HS USB ULPI mode works. - * - 3-pin mode support may be added in future. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* Register defines */ - -#define MCPC_CTRL 0x30 -#define MCPC_CTRL_RTSOL (1 << 7) -#define MCPC_CTRL_EXTSWR (1 << 6) -#define MCPC_CTRL_EXTSWC (1 << 5) -#define MCPC_CTRL_VOICESW (1 << 4) -#define MCPC_CTRL_OUT64K (1 << 3) -#define MCPC_CTRL_RTSCTSSW (1 << 2) -#define MCPC_CTRL_HS_UART (1 << 0) - -#define MCPC_IO_CTRL 0x33 -#define MCPC_IO_CTRL_MICBIASEN (1 << 5) -#define MCPC_IO_CTRL_CTS_NPU (1 << 4) -#define MCPC_IO_CTRL_RXD_PU (1 << 3) -#define MCPC_IO_CTRL_TXDTYP (1 << 2) -#define MCPC_IO_CTRL_CTSTYP (1 << 1) -#define MCPC_IO_CTRL_RTSTYP (1 << 0) - -#define MCPC_CTRL2 0x36 -#define MCPC_CTRL2_MCPC_CK_EN (1 << 0) - -#define OTHER_FUNC_CTRL 0x80 -#define OTHER_FUNC_CTRL_BDIS_ACON_EN (1 << 4) -#define OTHER_FUNC_CTRL_FIVEWIRE_MODE (1 << 2) - -#define OTHER_IFC_CTRL 0x83 -#define OTHER_IFC_CTRL_OE_INT_EN (1 << 6) -#define OTHER_IFC_CTRL_CEA2011_MODE (1 << 5) -#define OTHER_IFC_CTRL_FSLSSERIALMODE_4PIN (1 << 4) -#define OTHER_IFC_CTRL_HIZ_ULPI_60MHZ_OUT (1 << 3) -#define OTHER_IFC_CTRL_HIZ_ULPI (1 << 2) -#define OTHER_IFC_CTRL_ALT_INT_REROUTE (1 << 0) - -#define OTHER_INT_EN_RISE 0x86 -#define OTHER_INT_EN_FALL 0x89 -#define OTHER_INT_STS 0x8C -#define OTHER_INT_LATCH 0x8D -#define OTHER_INT_VB_SESS_VLD (1 << 7) -#define OTHER_INT_DM_HI (1 << 6) /* not valid for "latch" reg */ -#define OTHER_INT_DP_HI (1 << 5) /* not valid for "latch" reg */ -#define OTHER_INT_BDIS_ACON (1 << 3) /* not valid for "fall" regs */ -#define OTHER_INT_MANU (1 << 1) -#define OTHER_INT_ABNORMAL_STRESS (1 << 0) - -#define ID_STATUS 0x96 -#define ID_RES_FLOAT (1 << 4) -#define ID_RES_440K (1 << 3) -#define ID_RES_200K (1 << 2) -#define ID_RES_102K (1 << 1) -#define ID_RES_GND (1 << 0) - -#define POWER_CTRL 0xAC -#define POWER_CTRL_OTG_ENAB (1 << 5) - -#define OTHER_IFC_CTRL2 0xAF -#define OTHER_IFC_CTRL2_ULPI_STP_LOW (1 << 4) -#define OTHER_IFC_CTRL2_ULPI_TXEN_POL (1 << 3) -#define OTHER_IFC_CTRL2_ULPI_4PIN_2430 (1 << 2) -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_MASK (3 << 0) /* bits 0 and 1 */ -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT1N (0 << 0) -#define OTHER_IFC_CTRL2_USB_INT_OUTSEL_INT2N (1 << 0) - -#define REG_CTRL_EN 0xB2 -#define REG_CTRL_ERROR 0xB5 -#define ULPI_I2C_CONFLICT_INTEN (1 << 0) - -#define OTHER_FUNC_CTRL2 0xB8 -#define OTHER_FUNC_CTRL2_VBAT_TIMER_EN (1 << 0) - -/* following registers do not have separate _clr and _set registers */ -#define VBUS_DEBOUNCE 0xC0 -#define ID_DEBOUNCE 0xC1 -#define VBAT_TIMER 0xD3 -#define PHY_PWR_CTRL 0xFD -#define PHY_PWR_PHYPWD (1 << 0) -#define PHY_CLK_CTRL 0xFE -#define PHY_CLK_CTRL_CLOCKGATING_EN (1 << 2) -#define PHY_CLK_CTRL_CLK32K_EN (1 << 1) -#define REQ_PHY_DPLL_CLK (1 << 0) -#define PHY_CLK_CTRL_STS 0xFF -#define PHY_DPLL_CLK (1 << 0) - -/* In module TWL_MODULE_PM_MASTER */ -#define STS_HW_CONDITIONS 0x0F - -/* In module TWL_MODULE_PM_RECEIVER */ -#define VUSB_DEDICATED1 0x7D -#define VUSB_DEDICATED2 0x7E -#define VUSB1V5_DEV_GRP 0x71 -#define VUSB1V5_TYPE 0x72 -#define VUSB1V5_REMAP 0x73 -#define VUSB1V8_DEV_GRP 0x74 -#define VUSB1V8_TYPE 0x75 -#define VUSB1V8_REMAP 0x76 -#define VUSB3V1_DEV_GRP 0x77 -#define VUSB3V1_TYPE 0x78 -#define VUSB3V1_REMAP 0x79 - -/* In module TWL4030_MODULE_INTBR */ -#define PMBR1 0x0D -#define GPIO_USB_4PIN_ULPI_2430C (3 << 0) - -struct twl4030_usb { - struct usb_phy phy; - struct device *dev; - - /* TWL4030 internal USB regulator supplies */ - struct regulator *usb1v5; - struct regulator *usb1v8; - struct regulator *usb3v1; - - /* for vbus reporting with irqs disabled */ - spinlock_t lock; - - /* pin configuration */ - enum twl4030_usb_mode usb_mode; - - int irq; - enum omap_musb_vbus_id_status linkstat; - bool vbus_supplied; - u8 asleep; - bool irq_enabled; -}; - -/* internal define on top of container_of */ -#define phy_to_twl(x) container_of((x), struct twl4030_usb, phy) - -/*-------------------------------------------------------------------------*/ - -static int twl4030_i2c_write_u8_verify(struct twl4030_usb *twl, - u8 module, u8 data, u8 address) -{ - u8 check; - - if ((twl_i2c_write_u8(module, data, address) >= 0) && - (twl_i2c_read_u8(module, &check, address) >= 0) && - (check == data)) - return 0; - dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", - 1, module, address, check, data); - - /* Failed once: Try again */ - if ((twl_i2c_write_u8(module, data, address) >= 0) && - (twl_i2c_read_u8(module, &check, address) >= 0) && - (check == data)) - return 0; - dev_dbg(twl->dev, "Write%d[%d,0x%x] wrote %02x but read %02x\n", - 2, module, address, check, data); - - /* Failed again: Return error */ - return -EBUSY; -} - -#define twl4030_usb_write_verify(twl, address, data) \ - twl4030_i2c_write_u8_verify(twl, TWL_MODULE_USB, (data), (address)) - -static inline int twl4030_usb_write(struct twl4030_usb *twl, - u8 address, u8 data) -{ - int ret = 0; - - ret = twl_i2c_write_u8(TWL_MODULE_USB, data, address); - if (ret < 0) - dev_dbg(twl->dev, - "TWL4030:USB:Write[0x%x] Error %d\n", address, ret); - return ret; -} - -static inline int twl4030_readb(struct twl4030_usb *twl, u8 module, u8 address) -{ - u8 data; - int ret = 0; - - ret = twl_i2c_read_u8(module, &data, address); - if (ret >= 0) - ret = data; - else - dev_dbg(twl->dev, - "TWL4030:readb[0x%x,0x%x] Error %d\n", - module, address, ret); - - return ret; -} - -static inline int twl4030_usb_read(struct twl4030_usb *twl, u8 address) -{ - return twl4030_readb(twl, TWL_MODULE_USB, address); -} - -/*-------------------------------------------------------------------------*/ - -static inline int -twl4030_usb_set_bits(struct twl4030_usb *twl, u8 reg, u8 bits) -{ - return twl4030_usb_write(twl, ULPI_SET(reg), bits); -} - -static inline int -twl4030_usb_clear_bits(struct twl4030_usb *twl, u8 reg, u8 bits) -{ - return twl4030_usb_write(twl, ULPI_CLR(reg), bits); -} - -/*-------------------------------------------------------------------------*/ - -static enum omap_musb_vbus_id_status - twl4030_usb_linkstat(struct twl4030_usb *twl) -{ - int status; - enum omap_musb_vbus_id_status linkstat = OMAP_MUSB_UNKNOWN; - - twl->vbus_supplied = false; - - /* - * For ID/VBUS sensing, see manual section 15.4.8 ... - * except when using only battery backup power, two - * comparators produce VBUS_PRES and ID_PRES signals, - * which don't match docs elsewhere. But ... BIT(7) - * and BIT(2) of STS_HW_CONDITIONS, respectively, do - * seem to match up. If either is true the USB_PRES - * signal is active, the OTG module is activated, and - * its interrupt may be raised (may wake the system). - */ - status = twl4030_readb(twl, TWL_MODULE_PM_MASTER, STS_HW_CONDITIONS); - if (status < 0) - dev_err(twl->dev, "USB link status err %d\n", status); - else if (status & (BIT(7) | BIT(2))) { - if (status & (BIT(7))) - twl->vbus_supplied = true; - - if (status & BIT(2)) - linkstat = OMAP_MUSB_ID_GROUND; - else - linkstat = OMAP_MUSB_VBUS_VALID; - } else { - if (twl->linkstat != OMAP_MUSB_UNKNOWN) - linkstat = OMAP_MUSB_VBUS_OFF; - } - - dev_dbg(twl->dev, "HW_CONDITIONS 0x%02x/%d; link %d\n", - status, status, linkstat); - - /* REVISIT this assumes host and peripheral controllers - * are registered, and that both are active... - */ - - spin_lock_irq(&twl->lock); - twl->linkstat = linkstat; - spin_unlock_irq(&twl->lock); - - return linkstat; -} - -static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) -{ - twl->usb_mode = mode; - - switch (mode) { - case T2_USB_MODE_ULPI: - twl4030_usb_clear_bits(twl, ULPI_IFC_CTRL, - ULPI_IFC_CTRL_CARKITMODE); - twl4030_usb_set_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - twl4030_usb_clear_bits(twl, ULPI_FUNC_CTRL, - ULPI_FUNC_CTRL_XCVRSEL_MASK | - ULPI_FUNC_CTRL_OPMODE_MASK); - break; - case -1: - /* FIXME: power on defaults */ - break; - default: - dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", - mode); - break; - }; -} - -static void twl4030_i2c_access(struct twl4030_usb *twl, int on) -{ - unsigned long timeout; - int val = twl4030_usb_read(twl, PHY_CLK_CTRL); - - if (val >= 0) { - if (on) { - /* enable DPLL to access PHY registers over I2C */ - val |= REQ_PHY_DPLL_CLK; - WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, - (u8)val) < 0); - - timeout = jiffies + HZ; - while (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & - PHY_DPLL_CLK) - && time_before(jiffies, timeout)) - udelay(10); - if (!(twl4030_usb_read(twl, PHY_CLK_CTRL_STS) & - PHY_DPLL_CLK)) - dev_err(twl->dev, "Timeout setting T2 HSUSB " - "PHY DPLL clock\n"); - } else { - /* let ULPI control the DPLL clock */ - val &= ~REQ_PHY_DPLL_CLK; - WARN_ON(twl4030_usb_write_verify(twl, PHY_CLK_CTRL, - (u8)val) < 0); - } - } -} - -static void __twl4030_phy_power(struct twl4030_usb *twl, int on) -{ - u8 pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); - - if (on) - pwr &= ~PHY_PWR_PHYPWD; - else - pwr |= PHY_PWR_PHYPWD; - - WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); -} - -static void twl4030_phy_power(struct twl4030_usb *twl, int on) -{ - if (on) { - regulator_enable(twl->usb3v1); - regulator_enable(twl->usb1v8); - /* - * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP - * in twl4030) resets the VUSB_DEDICATED2 register. This reset - * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to - * SLEEP. We work around this by clearing the bit after usv3v1 - * is re-activated. This ensures that VUSB3V1 is really active. - */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2); - regulator_enable(twl->usb1v5); - __twl4030_phy_power(twl, 1); - twl4030_usb_write(twl, PHY_CLK_CTRL, - twl4030_usb_read(twl, PHY_CLK_CTRL) | - (PHY_CLK_CTRL_CLOCKGATING_EN | - PHY_CLK_CTRL_CLK32K_EN)); - } else { - __twl4030_phy_power(twl, 0); - regulator_disable(twl->usb1v5); - regulator_disable(twl->usb1v8); - regulator_disable(twl->usb3v1); - } -} - -static void twl4030_phy_suspend(struct twl4030_usb *twl, int controller_off) -{ - if (twl->asleep) - return; - - twl4030_phy_power(twl, 0); - twl->asleep = 1; - dev_dbg(twl->dev, "%s\n", __func__); -} - -static void __twl4030_phy_resume(struct twl4030_usb *twl) -{ - twl4030_phy_power(twl, 1); - twl4030_i2c_access(twl, 1); - twl4030_usb_set_mode(twl, twl->usb_mode); - if (twl->usb_mode == T2_USB_MODE_ULPI) - twl4030_i2c_access(twl, 0); -} - -static void twl4030_phy_resume(struct twl4030_usb *twl) -{ - if (!twl->asleep) - return; - __twl4030_phy_resume(twl); - twl->asleep = 0; - dev_dbg(twl->dev, "%s\n", __func__); -} - -static int twl4030_usb_ldo_init(struct twl4030_usb *twl) -{ - /* Enable writing to power configuration registers */ - twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1, - TWL4030_PM_MASTER_PROTECT_KEY); - - twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG2, - TWL4030_PM_MASTER_PROTECT_KEY); - - /* Keep VUSB3V1 LDO in sleep state until VBUS/ID change detected*/ - /*twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB_DEDICATED2);*/ - - /* input to VUSB3V1 LDO is from VBAT, not VBUS */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); - - /* Initialize 3.1V regulator */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); - - twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); - if (IS_ERR(twl->usb3v1)) - return -ENODEV; - - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); - - /* Initialize 1.5V regulator */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); - - twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); - if (IS_ERR(twl->usb1v5)) - goto fail1; - - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); - - /* Initialize 1.8V regulator */ - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); - - twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); - if (IS_ERR(twl->usb1v8)) - goto fail2; - - twl_i2c_write_u8(TWL_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); - - /* disable access to power configuration registers */ - twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0, - TWL4030_PM_MASTER_PROTECT_KEY); - - return 0; - -fail2: - regulator_put(twl->usb1v5); - twl->usb1v5 = NULL; -fail1: - regulator_put(twl->usb3v1); - twl->usb3v1 = NULL; - return -ENODEV; -} - -static ssize_t twl4030_usb_vbus_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct twl4030_usb *twl = dev_get_drvdata(dev); - unsigned long flags; - int ret = -EINVAL; - - spin_lock_irqsave(&twl->lock, flags); - ret = sprintf(buf, "%s\n", - twl->vbus_supplied ? "on" : "off"); - spin_unlock_irqrestore(&twl->lock, flags); - - return ret; -} -static DEVICE_ATTR(vbus, 0444, twl4030_usb_vbus_show, NULL); - -static irqreturn_t twl4030_usb_irq(int irq, void *_twl) -{ - struct twl4030_usb *twl = _twl; - enum omap_musb_vbus_id_status status; - - status = twl4030_usb_linkstat(twl); - if (status > 0) { - /* FIXME add a set_power() method so that B-devices can - * configure the charger appropriately. It's not always - * correct to consume VBUS power, and how much current to - * consume is a function of the USB configuration chosen - * by the host. - * - * REVISIT usb_gadget_vbus_connect(...) as needed, ditto - * its disconnect() sibling, when changing to/from the - * USB_LINK_VBUS state. musb_hdrc won't care until it - * starts to handle softconnect right. - */ - if (status == OMAP_MUSB_VBUS_OFF || - status == OMAP_MUSB_ID_FLOAT) - twl4030_phy_suspend(twl, 0); - else - twl4030_phy_resume(twl); - - omap_musb_mailbox(twl->linkstat); - } - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); - - return IRQ_HANDLED; -} - -static void twl4030_usb_phy_init(struct twl4030_usb *twl) -{ - enum omap_musb_vbus_id_status status; - - status = twl4030_usb_linkstat(twl); - if (status > 0) { - if (status == OMAP_MUSB_VBUS_OFF || - status == OMAP_MUSB_ID_FLOAT) { - __twl4030_phy_power(twl, 0); - twl->asleep = 1; - } else { - __twl4030_phy_resume(twl); - twl->asleep = 0; - } - - omap_musb_mailbox(twl->linkstat); - } - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); -} - -static int twl4030_set_suspend(struct usb_phy *x, int suspend) -{ - struct twl4030_usb *twl = phy_to_twl(x); - - if (suspend) - twl4030_phy_suspend(twl, 1); - else - twl4030_phy_resume(twl); - - return 0; -} - -static int twl4030_set_peripheral(struct usb_otg *otg, - struct usb_gadget *gadget) -{ - if (!otg) - return -ENODEV; - - otg->gadget = gadget; - if (!gadget) - otg->phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl4030_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - if (!otg) - return -ENODEV; - - otg->host = host; - if (!host) - otg->phy->state = OTG_STATE_UNDEFINED; - - return 0; -} - -static int twl4030_usb_probe(struct platform_device *pdev) -{ - struct twl4030_usb_data *pdata = pdev->dev.platform_data; - struct twl4030_usb *twl; - int status, err; - struct usb_otg *otg; - struct device_node *np = pdev->dev.of_node; - - twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); - if (!twl) - return -ENOMEM; - - if (np) - of_property_read_u32(np, "usb_mode", - (enum twl4030_usb_mode *)&twl->usb_mode); - else if (pdata) - twl->usb_mode = pdata->usb_mode; - else { - dev_err(&pdev->dev, "twl4030 initialized without pdata\n"); - return -EINVAL; - } - - otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); - if (!otg) - return -ENOMEM; - - twl->dev = &pdev->dev; - twl->irq = platform_get_irq(pdev, 0); - twl->vbus_supplied = false; - twl->asleep = 1; - twl->linkstat = OMAP_MUSB_UNKNOWN; - - twl->phy.dev = twl->dev; - twl->phy.label = "twl4030"; - twl->phy.otg = otg; - twl->phy.type = USB_PHY_TYPE_USB2; - twl->phy.set_suspend = twl4030_set_suspend; - - otg->phy = &twl->phy; - otg->set_host = twl4030_set_host; - otg->set_peripheral = twl4030_set_peripheral; - - /* init spinlock for workqueue */ - spin_lock_init(&twl->lock); - - err = twl4030_usb_ldo_init(twl); - if (err) { - dev_err(&pdev->dev, "ldo init failed\n"); - return err; - } - usb_add_phy_dev(&twl->phy); - - platform_set_drvdata(pdev, twl); - if (device_create_file(&pdev->dev, &dev_attr_vbus)) - dev_warn(&pdev->dev, "could not create sysfs file\n"); - - /* Our job is to use irqs and status from the power module - * to keep the transceiver disabled when nothing's connected. - * - * FIXME we actually shouldn't start enabling it until the - * USB controller drivers have said they're ready, by calling - * set_host() and/or set_peripheral() ... OTG_capable boards - * need both handles, otherwise just one suffices. - */ - twl->irq_enabled = true; - status = request_threaded_irq(twl->irq, NULL, twl4030_usb_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | - IRQF_ONESHOT, "twl4030_usb", twl); - if (status < 0) { - dev_dbg(&pdev->dev, "can't get IRQ %d, err %d\n", - twl->irq, status); - return status; - } - - /* Power down phy or make it work according to - * current link state. - */ - twl4030_usb_phy_init(twl); - - dev_info(&pdev->dev, "Initialized TWL4030 USB module\n"); - return 0; -} - -static int __exit twl4030_usb_remove(struct platform_device *pdev) -{ - struct twl4030_usb *twl = platform_get_drvdata(pdev); - int val; - - free_irq(twl->irq, twl); - device_remove_file(twl->dev, &dev_attr_vbus); - - /* set transceiver mode to power on defaults */ - twl4030_usb_set_mode(twl, -1); - - /* autogate 60MHz ULPI clock, - * clear dpll clock request for i2c access, - * disable 32KHz - */ - val = twl4030_usb_read(twl, PHY_CLK_CTRL); - if (val >= 0) { - val |= PHY_CLK_CTRL_CLOCKGATING_EN; - val &= ~(PHY_CLK_CTRL_CLK32K_EN | REQ_PHY_DPLL_CLK); - twl4030_usb_write(twl, PHY_CLK_CTRL, (u8)val); - } - - /* disable complete OTG block */ - twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); - - if (!twl->asleep) - twl4030_phy_power(twl, 0); - regulator_put(twl->usb1v5); - regulator_put(twl->usb1v8); - regulator_put(twl->usb3v1); - - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id twl4030_usb_id_table[] = { - { .compatible = "ti,twl4030-usb" }, - {} -}; -MODULE_DEVICE_TABLE(of, twl4030_usb_id_table); -#endif - -static struct platform_driver twl4030_usb_driver = { - .probe = twl4030_usb_probe, - .remove = __exit_p(twl4030_usb_remove), - .driver = { - .name = "twl4030_usb", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(twl4030_usb_id_table), - }, -}; - -static int __init twl4030_usb_init(void) -{ - return platform_driver_register(&twl4030_usb_driver); -} -subsys_initcall(twl4030_usb_init); - -static void __exit twl4030_usb_exit(void) -{ - platform_driver_unregister(&twl4030_usb_driver); -} -module_exit(twl4030_usb_exit); - -MODULE_ALIAS("platform:twl4030_usb"); -MODULE_AUTHOR("Texas Instruments, Inc, Nokia Corporation"); -MODULE_DESCRIPTION("TWL4030 USB transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/twl6030-usb.c b/drivers/usb/phy/twl6030-usb.c deleted file mode 100644 index 8cd6cf4..0000000 --- a/drivers/usb/phy/twl6030-usb.c +++ /dev/null @@ -1,446 +0,0 @@ -/* - * twl6030_usb - TWL6030 USB transceiver, talking to OMAP OTG driver. - * - * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Hema HK - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* usb register definitions */ -#define USB_VENDOR_ID_LSB 0x00 -#define USB_VENDOR_ID_MSB 0x01 -#define USB_PRODUCT_ID_LSB 0x02 -#define USB_PRODUCT_ID_MSB 0x03 -#define USB_VBUS_CTRL_SET 0x04 -#define USB_VBUS_CTRL_CLR 0x05 -#define USB_ID_CTRL_SET 0x06 -#define USB_ID_CTRL_CLR 0x07 -#define USB_VBUS_INT_SRC 0x08 -#define USB_VBUS_INT_LATCH_SET 0x09 -#define USB_VBUS_INT_LATCH_CLR 0x0A -#define USB_VBUS_INT_EN_LO_SET 0x0B -#define USB_VBUS_INT_EN_LO_CLR 0x0C -#define USB_VBUS_INT_EN_HI_SET 0x0D -#define USB_VBUS_INT_EN_HI_CLR 0x0E -#define USB_ID_INT_SRC 0x0F -#define USB_ID_INT_LATCH_SET 0x10 -#define USB_ID_INT_LATCH_CLR 0x11 - -#define USB_ID_INT_EN_LO_SET 0x12 -#define USB_ID_INT_EN_LO_CLR 0x13 -#define USB_ID_INT_EN_HI_SET 0x14 -#define USB_ID_INT_EN_HI_CLR 0x15 -#define USB_OTG_ADP_CTRL 0x16 -#define USB_OTG_ADP_HIGH 0x17 -#define USB_OTG_ADP_LOW 0x18 -#define USB_OTG_ADP_RISE 0x19 -#define USB_OTG_REVISION 0x1A - -/* to be moved to LDO */ -#define TWL6030_MISC2 0xE5 -#define TWL6030_CFG_LDO_PD2 0xF5 -#define TWL6030_BACKUP_REG 0xFA - -#define STS_HW_CONDITIONS 0x21 - -/* In module TWL6030_MODULE_PM_MASTER */ -#define STS_HW_CONDITIONS 0x21 -#define STS_USB_ID BIT(2) - -/* In module TWL6030_MODULE_PM_RECEIVER */ -#define VUSB_CFG_TRANS 0x71 -#define VUSB_CFG_STATE 0x72 -#define VUSB_CFG_VOLTAGE 0x73 - -/* in module TWL6030_MODULE_MAIN_CHARGE */ - -#define CHARGERUSB_CTRL1 0x8 - -#define CONTROLLER_STAT1 0x03 -#define VBUS_DET BIT(2) - -struct twl6030_usb { - struct phy_companion comparator; - struct device *dev; - - /* for vbus reporting with irqs disabled */ - spinlock_t lock; - - struct regulator *usb3v3; - - /* used to set vbus, in atomic path */ - struct work_struct set_vbus_work; - - int irq1; - int irq2; - enum omap_musb_vbus_id_status linkstat; - u8 asleep; - bool irq_enabled; - bool vbus_enable; - const char *regulator; -}; - -#define comparator_to_twl(x) container_of((x), struct twl6030_usb, comparator) - -/*-------------------------------------------------------------------------*/ - -static inline int twl6030_writeb(struct twl6030_usb *twl, u8 module, - u8 data, u8 address) -{ - int ret = 0; - - ret = twl_i2c_write_u8(module, data, address); - if (ret < 0) - dev_err(twl->dev, - "Write[0x%x] Error %d\n", address, ret); - return ret; -} - -static inline u8 twl6030_readb(struct twl6030_usb *twl, u8 module, u8 address) -{ - u8 data, ret = 0; - - ret = twl_i2c_read_u8(module, &data, address); - if (ret >= 0) - ret = data; - else - dev_err(twl->dev, - "readb[0x%x,0x%x] Error %d\n", - module, address, ret); - return ret; -} - -static int twl6030_start_srp(struct phy_companion *comparator) -{ - struct twl6030_usb *twl = comparator_to_twl(comparator); - - twl6030_writeb(twl, TWL_MODULE_USB, 0x24, USB_VBUS_CTRL_SET); - twl6030_writeb(twl, TWL_MODULE_USB, 0x84, USB_VBUS_CTRL_SET); - - mdelay(100); - twl6030_writeb(twl, TWL_MODULE_USB, 0xa0, USB_VBUS_CTRL_CLR); - - return 0; -} - -static int twl6030_usb_ldo_init(struct twl6030_usb *twl) -{ - /* Set to OTG_REV 1.3 and turn on the ID_WAKEUP_COMP */ - twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_BACKUP_REG); - - /* Program CFG_LDO_PD2 register and set VUSB bit */ - twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x1, TWL6030_CFG_LDO_PD2); - - /* Program MISC2 register and set bit VUSB_IN_VBAT */ - twl6030_writeb(twl, TWL6030_MODULE_ID0 , 0x10, TWL6030_MISC2); - - twl->usb3v3 = regulator_get(twl->dev, twl->regulator); - if (IS_ERR(twl->usb3v3)) - return -ENODEV; - - /* Program the USB_VBUS_CTRL_SET and set VBUS_ACT_COMP bit */ - twl6030_writeb(twl, TWL_MODULE_USB, 0x4, USB_VBUS_CTRL_SET); - - /* - * Program the USB_ID_CTRL_SET register to enable GND drive - * and the ID comparators - */ - twl6030_writeb(twl, TWL_MODULE_USB, 0x14, USB_ID_CTRL_SET); - - return 0; -} - -static ssize_t twl6030_usb_vbus_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct twl6030_usb *twl = dev_get_drvdata(dev); - unsigned long flags; - int ret = -EINVAL; - - spin_lock_irqsave(&twl->lock, flags); - - switch (twl->linkstat) { - case OMAP_MUSB_VBUS_VALID: - ret = snprintf(buf, PAGE_SIZE, "vbus\n"); - break; - case OMAP_MUSB_ID_GROUND: - ret = snprintf(buf, PAGE_SIZE, "id\n"); - break; - case OMAP_MUSB_VBUS_OFF: - ret = snprintf(buf, PAGE_SIZE, "none\n"); - break; - default: - ret = snprintf(buf, PAGE_SIZE, "UNKNOWN\n"); - } - spin_unlock_irqrestore(&twl->lock, flags); - - return ret; -} -static DEVICE_ATTR(vbus, 0444, twl6030_usb_vbus_show, NULL); - -static irqreturn_t twl6030_usb_irq(int irq, void *_twl) -{ - struct twl6030_usb *twl = _twl; - enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; - u8 vbus_state, hw_state; - - hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); - - vbus_state = twl6030_readb(twl, TWL_MODULE_MAIN_CHARGE, - CONTROLLER_STAT1); - if (!(hw_state & STS_USB_ID)) { - if (vbus_state & VBUS_DET) { - regulator_enable(twl->usb3v3); - twl->asleep = 1; - status = OMAP_MUSB_VBUS_VALID; - twl->linkstat = status; - omap_musb_mailbox(status); - } else { - if (twl->linkstat != OMAP_MUSB_UNKNOWN) { - status = OMAP_MUSB_VBUS_OFF; - twl->linkstat = status; - omap_musb_mailbox(status); - if (twl->asleep) { - regulator_disable(twl->usb3v3); - twl->asleep = 0; - } - } - } - } - sysfs_notify(&twl->dev->kobj, NULL, "vbus"); - - return IRQ_HANDLED; -} - -static irqreturn_t twl6030_usbotg_irq(int irq, void *_twl) -{ - struct twl6030_usb *twl = _twl; - enum omap_musb_vbus_id_status status = OMAP_MUSB_UNKNOWN; - u8 hw_state; - - hw_state = twl6030_readb(twl, TWL6030_MODULE_ID0, STS_HW_CONDITIONS); - - if (hw_state & STS_USB_ID) { - - regulator_enable(twl->usb3v3); - twl->asleep = 1; - twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_CLR); - twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_SET); - status = OMAP_MUSB_ID_GROUND; - twl->linkstat = status; - omap_musb_mailbox(status); - } else { - twl6030_writeb(twl, TWL_MODULE_USB, 0x10, USB_ID_INT_EN_HI_CLR); - twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); - } - twl6030_writeb(twl, TWL_MODULE_USB, status, USB_ID_INT_LATCH_CLR); - - return IRQ_HANDLED; -} - -static int twl6030_enable_irq(struct twl6030_usb *twl) -{ - twl6030_writeb(twl, TWL_MODULE_USB, 0x1, USB_ID_INT_EN_HI_SET); - twl6030_interrupt_unmask(0x05, REG_INT_MSK_LINE_C); - twl6030_interrupt_unmask(0x05, REG_INT_MSK_STS_C); - - twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, - REG_INT_MSK_LINE_C); - twl6030_interrupt_unmask(TWL6030_CHARGER_CTRL_INT_MASK, - REG_INT_MSK_STS_C); - twl6030_usb_irq(twl->irq2, twl); - twl6030_usbotg_irq(twl->irq1, twl); - - return 0; -} - -static void otg_set_vbus_work(struct work_struct *data) -{ - struct twl6030_usb *twl = container_of(data, struct twl6030_usb, - set_vbus_work); - - /* - * Start driving VBUS. Set OPA_MODE bit in CHARGERUSB_CTRL1 - * register. This enables boost mode. - */ - - if (twl->vbus_enable) - twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x40, - CHARGERUSB_CTRL1); - else - twl6030_writeb(twl, TWL_MODULE_MAIN_CHARGE , 0x00, - CHARGERUSB_CTRL1); -} - -static int twl6030_set_vbus(struct phy_companion *comparator, bool enabled) -{ - struct twl6030_usb *twl = comparator_to_twl(comparator); - - twl->vbus_enable = enabled; - schedule_work(&twl->set_vbus_work); - - return 0; -} - -static int twl6030_usb_probe(struct platform_device *pdev) -{ - u32 ret; - struct twl6030_usb *twl; - int status, err; - struct device_node *np = pdev->dev.of_node; - struct device *dev = &pdev->dev; - struct twl4030_usb_data *pdata = dev->platform_data; - - twl = devm_kzalloc(dev, sizeof *twl, GFP_KERNEL); - if (!twl) - return -ENOMEM; - - twl->dev = &pdev->dev; - twl->irq1 = platform_get_irq(pdev, 0); - twl->irq2 = platform_get_irq(pdev, 1); - twl->linkstat = OMAP_MUSB_UNKNOWN; - - twl->comparator.set_vbus = twl6030_set_vbus; - twl->comparator.start_srp = twl6030_start_srp; - - ret = omap_usb2_set_comparator(&twl->comparator); - if (ret == -ENODEV) { - dev_info(&pdev->dev, "phy not ready, deferring probe"); - return -EPROBE_DEFER; - } - - if (np) { - twl->regulator = "usb"; - } else if (pdata) { - if (pdata->features & TWL6025_SUBCLASS) - twl->regulator = "ldousb"; - else - twl->regulator = "vusb"; - } else { - dev_err(&pdev->dev, "twl6030 initialized without pdata\n"); - return -EINVAL; - } - - /* init spinlock for workqueue */ - spin_lock_init(&twl->lock); - - err = twl6030_usb_ldo_init(twl); - if (err) { - dev_err(&pdev->dev, "ldo init failed\n"); - return err; - } - - platform_set_drvdata(pdev, twl); - if (device_create_file(&pdev->dev, &dev_attr_vbus)) - dev_warn(&pdev->dev, "could not create sysfs file\n"); - - INIT_WORK(&twl->set_vbus_work, otg_set_vbus_work); - - twl->irq_enabled = true; - status = request_threaded_irq(twl->irq1, NULL, twl6030_usbotg_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, - "twl6030_usb", twl); - if (status < 0) { - dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", - twl->irq1, status); - device_remove_file(twl->dev, &dev_attr_vbus); - return status; - } - - status = request_threaded_irq(twl->irq2, NULL, twl6030_usb_irq, - IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING | IRQF_ONESHOT, - "twl6030_usb", twl); - if (status < 0) { - dev_err(&pdev->dev, "can't get IRQ %d, err %d\n", - twl->irq2, status); - free_irq(twl->irq1, twl); - device_remove_file(twl->dev, &dev_attr_vbus); - return status; - } - - twl->asleep = 0; - twl6030_enable_irq(twl); - dev_info(&pdev->dev, "Initialized TWL6030 USB module\n"); - - return 0; -} - -static int __exit twl6030_usb_remove(struct platform_device *pdev) -{ - struct twl6030_usb *twl = platform_get_drvdata(pdev); - - twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, - REG_INT_MSK_LINE_C); - twl6030_interrupt_mask(TWL6030_USBOTG_INT_MASK, - REG_INT_MSK_STS_C); - free_irq(twl->irq1, twl); - free_irq(twl->irq2, twl); - regulator_put(twl->usb3v3); - device_remove_file(twl->dev, &dev_attr_vbus); - cancel_work_sync(&twl->set_vbus_work); - - return 0; -} - -#ifdef CONFIG_OF -static const struct of_device_id twl6030_usb_id_table[] = { - { .compatible = "ti,twl6030-usb" }, - {} -}; -MODULE_DEVICE_TABLE(of, twl6030_usb_id_table); -#endif - -static struct platform_driver twl6030_usb_driver = { - .probe = twl6030_usb_probe, - .remove = __exit_p(twl6030_usb_remove), - .driver = { - .name = "twl6030_usb", - .owner = THIS_MODULE, - .of_match_table = of_match_ptr(twl6030_usb_id_table), - }, -}; - -static int __init twl6030_usb_init(void) -{ - return platform_driver_register(&twl6030_usb_driver); -} -subsys_initcall(twl6030_usb_init); - -static void __exit twl6030_usb_exit(void) -{ - platform_driver_unregister(&twl6030_usb_driver); -} -module_exit(twl6030_usb_exit); - -MODULE_ALIAS("platform:twl6030_usb"); -MODULE_AUTHOR("Hema HK "); -MODULE_DESCRIPTION("TWL6030 USB transceiver driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/phy/ulpi.c b/drivers/usb/phy/ulpi.c deleted file mode 100644 index 217339d..0000000 --- a/drivers/usb/phy/ulpi.c +++ /dev/null @@ -1,283 +0,0 @@ -/* - * Generic ULPI USB transceiver support - * - * Copyright (C) 2009 Daniel Mack - * - * Based on sources from - * - * Sascha Hauer - * Freescale Semiconductors - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#include -#include -#include -#include -#include -#include - - -struct ulpi_info { - unsigned int id; - char *name; -}; - -#define ULPI_ID(vendor, product) (((vendor) << 16) | (product)) -#define ULPI_INFO(_id, _name) \ - { \ - .id = (_id), \ - .name = (_name), \ - } - -/* ULPI hardcoded IDs, used for probing */ -static struct ulpi_info ulpi_ids[] = { - ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), - ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), -}; - -static int ulpi_set_otg_flags(struct usb_phy *phy) -{ - unsigned int flags = ULPI_OTG_CTRL_DP_PULLDOWN | - ULPI_OTG_CTRL_DM_PULLDOWN; - - if (phy->flags & ULPI_OTG_ID_PULLUP) - flags |= ULPI_OTG_CTRL_ID_PULLUP; - - /* - * ULPI Specification rev.1.1 default - * for Dp/DmPulldown is enabled. - */ - if (phy->flags & ULPI_OTG_DP_PULLDOWN_DIS) - flags &= ~ULPI_OTG_CTRL_DP_PULLDOWN; - - if (phy->flags & ULPI_OTG_DM_PULLDOWN_DIS) - flags &= ~ULPI_OTG_CTRL_DM_PULLDOWN; - - if (phy->flags & ULPI_OTG_EXTVBUSIND) - flags |= ULPI_OTG_CTRL_EXTVBUSIND; - - return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL); -} - -static int ulpi_set_fc_flags(struct usb_phy *phy) -{ - unsigned int flags = 0; - - /* - * ULPI Specification rev.1.1 default - * for XcvrSelect is Full Speed. - */ - if (phy->flags & ULPI_FC_HS) - flags |= ULPI_FUNC_CTRL_HIGH_SPEED; - else if (phy->flags & ULPI_FC_LS) - flags |= ULPI_FUNC_CTRL_LOW_SPEED; - else if (phy->flags & ULPI_FC_FS4LS) - flags |= ULPI_FUNC_CTRL_FS4LS; - else - flags |= ULPI_FUNC_CTRL_FULL_SPEED; - - if (phy->flags & ULPI_FC_TERMSEL) - flags |= ULPI_FUNC_CTRL_TERMSELECT; - - /* - * ULPI Specification rev.1.1 default - * for OpMode is Normal Operation. - */ - if (phy->flags & ULPI_FC_OP_NODRV) - flags |= ULPI_FUNC_CTRL_OPMODE_NONDRIVING; - else if (phy->flags & ULPI_FC_OP_DIS_NRZI) - flags |= ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI; - else if (phy->flags & ULPI_FC_OP_NSYNC_NEOP) - flags |= ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP; - else - flags |= ULPI_FUNC_CTRL_OPMODE_NORMAL; - - /* - * ULPI Specification rev.1.1 default - * for SuspendM is Powered. - */ - flags |= ULPI_FUNC_CTRL_SUSPENDM; - - return usb_phy_io_write(phy, flags, ULPI_FUNC_CTRL); -} - -static int ulpi_set_ic_flags(struct usb_phy *phy) -{ - unsigned int flags = 0; - - if (phy->flags & ULPI_IC_AUTORESUME) - flags |= ULPI_IFC_CTRL_AUTORESUME; - - if (phy->flags & ULPI_IC_EXTVBUS_INDINV) - flags |= ULPI_IFC_CTRL_EXTERNAL_VBUS; - - if (phy->flags & ULPI_IC_IND_PASSTHRU) - flags |= ULPI_IFC_CTRL_PASSTHRU; - - if (phy->flags & ULPI_IC_PROTECT_DIS) - flags |= ULPI_IFC_CTRL_PROTECT_IFC_DISABLE; - - return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL); -} - -static int ulpi_set_flags(struct usb_phy *phy) -{ - int ret; - - ret = ulpi_set_otg_flags(phy); - if (ret) - return ret; - - ret = ulpi_set_ic_flags(phy); - if (ret) - return ret; - - return ulpi_set_fc_flags(phy); -} - -static int ulpi_check_integrity(struct usb_phy *phy) -{ - int ret, i; - unsigned int val = 0x55; - - for (i = 0; i < 2; i++) { - ret = usb_phy_io_write(phy, val, ULPI_SCRATCH); - if (ret < 0) - return ret; - - ret = usb_phy_io_read(phy, ULPI_SCRATCH); - if (ret < 0) - return ret; - - if (ret != val) { - pr_err("ULPI integrity check: failed!"); - return -ENODEV; - } - val = val << 1; - } - - pr_info("ULPI integrity check: passed.\n"); - - return 0; -} - -static int ulpi_init(struct usb_phy *phy) -{ - int i, vid, pid, ret; - u32 ulpi_id = 0; - - for (i = 0; i < 4; i++) { - ret = usb_phy_io_read(phy, ULPI_PRODUCT_ID_HIGH - i); - if (ret < 0) - return ret; - ulpi_id = (ulpi_id << 8) | ret; - } - vid = ulpi_id & 0xffff; - pid = ulpi_id >> 16; - - pr_info("ULPI transceiver vendor/product ID 0x%04x/0x%04x\n", vid, pid); - - for (i = 0; i < ARRAY_SIZE(ulpi_ids); i++) { - if (ulpi_ids[i].id == ULPI_ID(vid, pid)) { - pr_info("Found %s ULPI transceiver.\n", - ulpi_ids[i].name); - break; - } - } - - ret = ulpi_check_integrity(phy); - if (ret) - return ret; - - return ulpi_set_flags(phy); -} - -static int ulpi_set_host(struct usb_otg *otg, struct usb_bus *host) -{ - struct usb_phy *phy = otg->phy; - unsigned int flags = usb_phy_io_read(phy, ULPI_IFC_CTRL); - - if (!host) { - otg->host = NULL; - return 0; - } - - otg->host = host; - - flags &= ~(ULPI_IFC_CTRL_6_PIN_SERIAL_MODE | - ULPI_IFC_CTRL_3_PIN_SERIAL_MODE | - ULPI_IFC_CTRL_CARKITMODE); - - if (phy->flags & ULPI_IC_6PIN_SERIAL) - flags |= ULPI_IFC_CTRL_6_PIN_SERIAL_MODE; - else if (phy->flags & ULPI_IC_3PIN_SERIAL) - flags |= ULPI_IFC_CTRL_3_PIN_SERIAL_MODE; - else if (phy->flags & ULPI_IC_CARKIT) - flags |= ULPI_IFC_CTRL_CARKITMODE; - - return usb_phy_io_write(phy, flags, ULPI_IFC_CTRL); -} - -static int ulpi_set_vbus(struct usb_otg *otg, bool on) -{ - struct usb_phy *phy = otg->phy; - unsigned int flags = usb_phy_io_read(phy, ULPI_OTG_CTRL); - - flags &= ~(ULPI_OTG_CTRL_DRVVBUS | ULPI_OTG_CTRL_DRVVBUS_EXT); - - if (on) { - if (phy->flags & ULPI_OTG_DRVVBUS) - flags |= ULPI_OTG_CTRL_DRVVBUS; - - if (phy->flags & ULPI_OTG_DRVVBUS_EXT) - flags |= ULPI_OTG_CTRL_DRVVBUS_EXT; - } - - return usb_phy_io_write(phy, flags, ULPI_OTG_CTRL); -} - -struct usb_phy * -otg_ulpi_create(struct usb_phy_io_ops *ops, - unsigned int flags) -{ - struct usb_phy *phy; - struct usb_otg *otg; - - phy = kzalloc(sizeof(*phy), GFP_KERNEL); - if (!phy) - return NULL; - - otg = kzalloc(sizeof(*otg), GFP_KERNEL); - if (!otg) { - kfree(phy); - return NULL; - } - - phy->label = "ULPI"; - phy->flags = flags; - phy->io_ops = ops; - phy->otg = otg; - phy->init = ulpi_init; - - otg->phy = phy; - otg->set_host = ulpi_set_host; - otg->set_vbus = ulpi_set_vbus; - - return phy; -} -EXPORT_SYMBOL_GPL(otg_ulpi_create); - diff --git a/drivers/usb/phy/ulpi_viewport.c b/drivers/usb/phy/ulpi_viewport.c deleted file mode 100644 index c5ba7e5..0000000 --- a/drivers/usb/phy/ulpi_viewport.c +++ /dev/null @@ -1,80 +0,0 @@ -/* - * Copyright (C) 2011 Google, Inc. - * - * This software is licensed under the terms of the GNU General Public - * License version 2, as published by the Free Software Foundation, and - * may be copied, distributed, and modified under those terms. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include -#include -#include -#include -#include - -#define ULPI_VIEW_WAKEUP (1 << 31) -#define ULPI_VIEW_RUN (1 << 30) -#define ULPI_VIEW_WRITE (1 << 29) -#define ULPI_VIEW_READ (0 << 29) -#define ULPI_VIEW_ADDR(x) (((x) & 0xff) << 16) -#define ULPI_VIEW_DATA_READ(x) (((x) >> 8) & 0xff) -#define ULPI_VIEW_DATA_WRITE(x) ((x) & 0xff) - -static int ulpi_viewport_wait(void __iomem *view, u32 mask) -{ - unsigned long usec = 2000; - - while (usec--) { - if (!(readl(view) & mask)) - return 0; - - udelay(1); - }; - - return -ETIMEDOUT; -} - -static int ulpi_viewport_read(struct usb_phy *otg, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); - ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); - if (ret) - return ret; - - writel(ULPI_VIEW_RUN | ULPI_VIEW_READ | ULPI_VIEW_ADDR(reg), view); - ret = ulpi_viewport_wait(view, ULPI_VIEW_RUN); - if (ret) - return ret; - - return ULPI_VIEW_DATA_READ(readl(view)); -} - -static int ulpi_viewport_write(struct usb_phy *otg, u32 val, u32 reg) -{ - int ret; - void __iomem *view = otg->io_priv; - - writel(ULPI_VIEW_WAKEUP | ULPI_VIEW_WRITE, view); - ret = ulpi_viewport_wait(view, ULPI_VIEW_WAKEUP); - if (ret) - return ret; - - writel(ULPI_VIEW_RUN | ULPI_VIEW_WRITE | ULPI_VIEW_DATA_WRITE(val) | - ULPI_VIEW_ADDR(reg), view); - - return ulpi_viewport_wait(view, ULPI_VIEW_RUN); -} - -struct usb_phy_io_ops ulpi_viewport_access_ops = { - .read = ulpi_viewport_read, - .write = ulpi_viewport_write, -}; -- cgit v0.10.2