From 9c4b562abc9005e4b413de02c85d3d29da707cba Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 19 Jan 2006 18:07:10 +0100 Subject: Move ip2.c and ip2main.c to drivers/char/ip2/ where the other files used by this driver reside. Renamed ip2.c to ip2base.c to allow ip2.o to be built from multiple objects. Signed-off-by: Adrian Bunk Acked-by: Michael H. Warfield diff --git a/drivers/char/Makefile b/drivers/char/Makefile index 503dd90..090d154 100644 --- a/drivers/char/Makefile +++ b/drivers/char/Makefile @@ -31,7 +31,7 @@ obj-$(CONFIG_MOXA_INTELLIO) += moxa.o obj-$(CONFIG_A2232) += ser_a2232.o generic_serial.o obj-$(CONFIG_ATARI_DSP56K) += dsp56k.o obj-$(CONFIG_MOXA_SMARTIO) += mxser.o -obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o +obj-$(CONFIG_COMPUTONE) += ip2/ obj-$(CONFIG_RISCOM8) += riscom8.o obj-$(CONFIG_ISI) += isicom.o obj-$(CONFIG_SYNCLINK) += synclink.o diff --git a/drivers/char/ip2.c b/drivers/char/ip2.c deleted file mode 100644 index 7cadfc6..0000000 --- a/drivers/char/ip2.c +++ /dev/null @@ -1,109 +0,0 @@ -// ip2.c -// This is a dummy module to make the firmware available when needed -// and allows it to be unloaded when not. Rumor is the __initdata -// macro doesn't always works on all platforms so we use this kludge. -// If not compiled as a module it just makes fip_firm avaliable then -// __initdata should work as advertized -// - -#include -#include -#include - -#ifndef __init -#define __init -#endif -#ifndef __initfunc -#define __initfunc(a) a -#endif -#ifndef __initdata -#define __initdata -#endif - -#include "./ip2/ip2types.h" -#include "./ip2/fip_firm.h" // the meat - -int -ip2_loadmain(int *, int *, unsigned char *, int ); // ref into ip2main.c - -/* Note: Add compiled in defaults to these arrays, not to the structure - in ip2/ip2.h any longer. That structure WILL get overridden - by these values, or command line values, or insmod values!!! =mhw= -*/ -static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 }; -static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; - -static int poll_only = 0; - -MODULE_AUTHOR("Doug McNash"); -MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); -module_param_array(irq, int, NULL, 0); -MODULE_PARM_DESC(irq,"Interrupts for IntelliPort Cards"); -module_param_array(io, int, NULL, 0); -MODULE_PARM_DESC(io,"I/O ports for IntelliPort Cards"); -module_param(poll_only, bool, 0); -MODULE_PARM_DESC(poll_only,"Do not use card interrupts"); - - -static int __init ip2_init(void) -{ - if( poll_only ) { - /* Hard lock the interrupts to zero */ - irq[0] = irq[1] = irq[2] = irq[3] = 0; - } - - return ip2_loadmain(io,irq,(unsigned char *)fip_firm,sizeof(fip_firm)); -} -module_init(ip2_init); - -MODULE_LICENSE("GPL"); - -#ifndef MODULE -/****************************************************************************** - * ip2_setup: - * str: kernel command line string - * - * Can't autoprobe the boards so user must specify configuration on - * kernel command line. Sane people build it modular but the others - * come here. - * - * Alternating pairs of io,irq for up to 4 boards. - * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 - * - * io=0 => No board - * io=1 => PCI - * io=2 => EISA - * else => ISA I/O address - * - * irq=0 or invalid for ISA will revert to polling mode - * - * Any value = -1, do not overwrite compiled in value. - * - ******************************************************************************/ -static int __init ip2_setup(char *str) -{ - int ints[10]; /* 4 boards, 2 parameters + 2 */ - int i, j; - - str = get_options (str, ARRAY_SIZE(ints), ints); - - for( i = 0, j = 1; i < 4; i++ ) { - if( j > ints[0] ) { - break; - } - if( ints[j] >= 0 ) { - io[i] = ints[j]; - } - j++; - if( j > ints[0] ) { - break; - } - if( ints[j] >= 0 ) { - irq[i] = ints[j]; - } - j++; - } - return 1; -} -__setup("ip2=", ip2_setup); -#endif /* !MODULE */ diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile new file mode 100644 index 0000000..6bfe254 --- /dev/null +++ b/drivers/char/ip2/Makefile @@ -0,0 +1,8 @@ +# +# Makefile for the Computone IntelliPort Plus Driver +# + +obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o + +ip2-objs := ip2base.o + diff --git a/drivers/char/ip2/ip2base.c b/drivers/char/ip2/ip2base.c new file mode 100644 index 0000000..435ccfc --- /dev/null +++ b/drivers/char/ip2/ip2base.c @@ -0,0 +1,109 @@ +// ip2.c +// This is a dummy module to make the firmware available when needed +// and allows it to be unloaded when not. Rumor is the __initdata +// macro doesn't always works on all platforms so we use this kludge. +// If not compiled as a module it just makes fip_firm avaliable then +// __initdata should work as advertized +// + +#include +#include +#include + +#ifndef __init +#define __init +#endif +#ifndef __initfunc +#define __initfunc(a) a +#endif +#ifndef __initdata +#define __initdata +#endif + +#include "ip2types.h" +#include "fip_firm.h" // the meat + +int +ip2_loadmain(int *, int *, unsigned char *, int ); // ref into ip2main.c + +/* Note: Add compiled in defaults to these arrays, not to the structure + in ip2.h any longer. That structure WILL get overridden + by these values, or command line values, or insmod values!!! =mhw= +*/ +static int io[IP2_MAX_BOARDS]= { 0, 0, 0, 0 }; +static int irq[IP2_MAX_BOARDS] = { -1, -1, -1, -1 }; + +static int poll_only = 0; + +MODULE_AUTHOR("Doug McNash"); +MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); +module_param_array(irq, int, NULL, 0); +MODULE_PARM_DESC(irq,"Interrupts for IntelliPort Cards"); +module_param_array(io, int, NULL, 0); +MODULE_PARM_DESC(io,"I/O ports for IntelliPort Cards"); +module_param(poll_only, bool, 0); +MODULE_PARM_DESC(poll_only,"Do not use card interrupts"); + + +static int __init ip2_init(void) +{ + if( poll_only ) { + /* Hard lock the interrupts to zero */ + irq[0] = irq[1] = irq[2] = irq[3] = 0; + } + + return ip2_loadmain(io,irq,(unsigned char *)fip_firm,sizeof(fip_firm)); +} +module_init(ip2_init); + +MODULE_LICENSE("GPL"); + +#ifndef MODULE +/****************************************************************************** + * ip2_setup: + * str: kernel command line string + * + * Can't autoprobe the boards so user must specify configuration on + * kernel command line. Sane people build it modular but the others + * come here. + * + * Alternating pairs of io,irq for up to 4 boards. + * ip2=io0,irq0,io1,irq1,io2,irq2,io3,irq3 + * + * io=0 => No board + * io=1 => PCI + * io=2 => EISA + * else => ISA I/O address + * + * irq=0 or invalid for ISA will revert to polling mode + * + * Any value = -1, do not overwrite compiled in value. + * + ******************************************************************************/ +static int __init ip2_setup(char *str) +{ + int ints[10]; /* 4 boards, 2 parameters + 2 */ + int i, j; + + str = get_options (str, ARRAY_SIZE(ints), ints); + + for( i = 0, j = 1; i < 4; i++ ) { + if( j > ints[0] ) { + break; + } + if( ints[j] >= 0 ) { + io[i] = ints[j]; + } + j++; + if( j > ints[0] ) { + break; + } + if( ints[j] >= 0 ) { + irq[i] = ints[j]; + } + j++; + } + return 1; +} +__setup("ip2=", ip2_setup); +#endif /* !MODULE */ diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c new file mode 100644 index 0000000..52f64bf --- /dev/null +++ b/drivers/char/ip2/ip2main.c @@ -0,0 +1,3260 @@ +/* +* +* (c) 1999 by Computone Corporation +* +******************************************************************************** +* +* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport +* serial I/O controllers. +* +* DESCRIPTION: Mainline code for the device driver +* +*******************************************************************************/ +// ToDo: +// +// Fix the immediate DSS_NOW problem. +// Work over the channel stats return logic in ip2_ipl_ioctl so they +// make sense for all 256 possible channels and so the user space +// utilities will compile and work properly. +// +// Done: +// +// 1.2.14 /\/\|=mhw=|\/\/ +// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts. +// Changed the definition of ip2trace to be more consistent with kernel style +// Thanks to Andreas Dilger for these updates +// +// 1.2.13 /\/\|=mhw=|\/\/ +// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform +// to agreed devfs serial device naming convention. +// +// 1.2.12 /\/\|=mhw=|\/\/ +// Cleaned up some remove queue cut and paste errors +// +// 1.2.11 /\/\|=mhw=|\/\/ +// Clean up potential NULL pointer dereferences +// Clean up devfs registration +// Add kernel command line parsing for io and irq +// Compile defaults for io and irq are now set in ip2.c not ip2.h! +// Reworked poll_only hack for explicit parameter setting +// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0 +// Merged ip2_loadmain and old_ip2_init +// Converted all instances of interruptible_sleep_on into queue calls +// Most of these had no race conditions but better to clean up now +// +// 1.2.10 /\/\|=mhw=|\/\/ +// Fixed the bottom half interrupt handler and enabled USE_IQI +// to split the interrupt handler into a formal top-half / bottom-half +// Fixed timing window on high speed processors that queued messages to +// the outbound mail fifo faster than the board could handle. +// +// 1.2.9 +// Four box EX was barfing on >128k kmalloc, made structure smaller by +// reducing output buffer size +// +// 1.2.8 +// Device file system support (MHW) +// +// 1.2.7 +// Fixed +// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules +// +// 1.2.6 +//Fixes DCD problems +// DCD was not reported when CLOCAL was set on call to TIOCMGET +// +//Enhancements: +// TIOCMGET requests and waits for status return +// No DSS interrupts enabled except for DCD when needed +// +// For internal use only +// +//#define IP2DEBUG_INIT +//#define IP2DEBUG_OPEN +//#define IP2DEBUG_WRITE +//#define IP2DEBUG_READ +//#define IP2DEBUG_IOCTL +//#define IP2DEBUG_IPL + +//#define IP2DEBUG_TRACE +//#define DEBUG_FIFO + +/************/ +/* Includes */ +/************/ +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include +#include +#include + +#include +#include + +#include + +#include "ip2types.h" +#include "ip2trace.h" +#include "ip2ioctl.h" +#include "ip2.h" +#include "i2ellis.h" +#include "i2lib.h" + +/***************** + * /proc/ip2mem * + *****************/ + +#include + +static int ip2_read_procmem(char *, char **, off_t, int); +static int ip2_read_proc(char *, char **, off_t, int, int *, void * ); + +/********************/ +/* Type Definitions */ +/********************/ + +/*************/ +/* Constants */ +/*************/ + +/* String constants to identify ourselves */ +static char *pcName = "Computone IntelliPort Plus multiport driver"; +static char *pcVersion = "1.2.14"; + +/* String constants for port names */ +static char *pcDriver_name = "ip2"; +static char *pcIpl = "ip2ipl"; + +/* Serial subtype definitions */ +#define SERIAL_TYPE_NORMAL 1 + +// cheezy kludge or genius - you decide? +int ip2_loadmain(int *, int *, unsigned char *, int); +static unsigned char *Fip_firmware; +static int Fip_firmware_size; + +/***********************/ +/* Function Prototypes */ +/***********************/ + +/* Global module entry functions */ + +/* Private (static) functions */ +static int ip2_open(PTTY, struct file *); +static void ip2_close(PTTY, struct file *); +static int ip2_write(PTTY, const unsigned char *, int); +static void ip2_putchar(PTTY, unsigned char); +static void ip2_flush_chars(PTTY); +static int ip2_write_room(PTTY); +static int ip2_chars_in_buf(PTTY); +static void ip2_flush_buffer(PTTY); +static int ip2_ioctl(PTTY, struct file *, UINT, ULONG); +static void ip2_set_termios(PTTY, struct termios *); +static void ip2_set_line_discipline(PTTY); +static void ip2_throttle(PTTY); +static void ip2_unthrottle(PTTY); +static void ip2_stop(PTTY); +static void ip2_start(PTTY); +static void ip2_hangup(PTTY); +static int ip2_tiocmget(struct tty_struct *tty, struct file *file); +static int ip2_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear); + +static void set_irq(int, int); +static void ip2_interrupt_bh(i2eBordStrPtr pB); +static irqreturn_t ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs); +static void ip2_poll(unsigned long arg); +static inline void service_all_boards(void); +static void do_input(void *p); +static void do_status(void *p); + +static void ip2_wait_until_sent(PTTY,int); + +static void set_params (i2ChanStrPtr, struct termios *); +static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *); +static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *); + +static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *); +static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *); +static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG); +static int ip2_ipl_open(struct inode *, struct file *); + +static int DumpTraceBuffer(char __user *, int); +static int DumpFifoBuffer( char __user *, int); + +static void ip2_init_board(int); +static unsigned short find_eisa_board(int); + +/***************/ +/* Static Data */ +/***************/ + +static struct tty_driver *ip2_tty_driver; + +/* Here, then is a table of board pointers which the interrupt routine should + * scan through to determine who it must service. + */ +static unsigned short i2nBoards; // Number of boards here + +static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS]; + +static i2ChanStrPtr DevTable[IP2_MAX_PORTS]; +//DevTableMem just used to save addresses for kfree +static void *DevTableMem[IP2_MAX_BOARDS]; + +/* This is the driver descriptor for the ip2ipl device, which is used to + * download the loadware to the boards. + */ +static struct file_operations ip2_ipl = { + .owner = THIS_MODULE, + .read = ip2_ipl_read, + .write = ip2_ipl_write, + .ioctl = ip2_ipl_ioctl, + .open = ip2_ipl_open, +}; + +static unsigned long irq_counter = 0; +static unsigned long bh_counter = 0; + +// Use immediate queue to service interrupts +#define USE_IQI +//#define USE_IQ // PCI&2.2 needs work + +/* The timer_list entry for our poll routine. If interrupt operation is not + * selected, the board is serviced periodically to see if anything needs doing. + */ +#define POLL_TIMEOUT (jiffies + 1) +static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0); +static char TimerOn; + +#ifdef IP2DEBUG_TRACE +/* Trace (debug) buffer data */ +#define TRACEMAX 1000 +static unsigned long tracebuf[TRACEMAX]; +static int tracestuff; +static int tracestrip; +static int tracewrap; +#endif + +/**********/ +/* Macros */ +/**********/ + +#if defined(MODULE) && defined(IP2DEBUG_OPEN) +#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \ + tty->name,(pCh->flags),ip2_tty_driver->refcount, \ + tty->count,/*GET_USE_COUNT(module)*/0,s) +#else +#define DBG_CNT(s) +#endif + +/********/ +/* Code */ +/********/ + +#include "i2ellis.c" /* Extremely low-level interface services */ +#include "i2cmd.c" /* Standard loadware command definitions */ +#include "i2lib.c" /* High level interface services */ + +/* Configuration area for modprobe */ + +MODULE_AUTHOR("Doug McNash"); +MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); + +static int poll_only = 0; + +static int Eisa_irq; +static int Eisa_slot; + +static int iindx; +static char rirqs[IP2_MAX_BOARDS]; +static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; + +/* for sysfs class support */ +static struct class *ip2_class; + +// Some functions to keep track of what irq's we have + +static int __init +is_valid_irq(int irq) +{ + int *i = Valid_Irqs; + + while ((*i != 0) && (*i != irq)) { + i++; + } + return (*i); +} + +static void __init +mark_requested_irq( char irq ) +{ + rirqs[iindx++] = irq; +} + +#ifdef MODULE +static int __init +clear_requested_irq( char irq ) +{ + int i; + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if (rirqs[i] == irq) { + rirqs[i] = 0; + return 1; + } + } + return 0; +} +#endif + +static int __init +have_requested_irq( char irq ) +{ + // array init to zeros so 0 irq will not be requested as a side effect + int i; + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if (rirqs[i] == irq) + return 1; + } + return 0; +} + +/******************************************************************************/ +/* Function: init_module() */ +/* Parameters: None */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This is a required entry point for an installable module. It simply calls */ +/* the driver initialisation function and returns what it returns. */ +/******************************************************************************/ +#ifdef MODULE +int +init_module(void) +{ +#ifdef IP2DEBUG_INIT + printk (KERN_DEBUG "Loading module ...\n" ); +#endif + return 0; +} +#endif /* MODULE */ + +/******************************************************************************/ +/* Function: cleanup_module() */ +/* Parameters: None */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This is a required entry point for an installable module. It has to return */ +/* the device and the driver to a passive state. It should not be necessary */ +/* to reset the board fully, especially as the loadware is downloaded */ +/* externally rather than in the driver. We just want to disable the board */ +/* and clear the loadware to a reset state. To allow this there has to be a */ +/* way to detect whether the board has the loadware running at init time to */ +/* handle subsequent installations of the driver. All memory allocated by the */ +/* driver should be returned since it may be unloaded from memory. */ +/******************************************************************************/ +#ifdef MODULE +void +cleanup_module(void) +{ + int err; + int i; + +#ifdef IP2DEBUG_INIT + printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion ); +#endif + /* Stop poll timer if we had one. */ + if ( TimerOn ) { + del_timer ( &PollTimer ); + TimerOn = 0; + } + + /* Reset the boards we have. */ + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] ) { + iiReset( i2BoardPtrTable[i] ); + } + } + + /* The following is done at most once, if any boards were installed. */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] ) { + iiResetDelay( i2BoardPtrTable[i] ); + /* free io addresses and Tibet */ + release_region( ip2config.addr[i], 8 ); + class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i)); + devfs_remove("ip2/ipl%d", i); + class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1)); + devfs_remove("ip2/stat%d", i); + } + /* Disable and remove interrupt handler. */ + if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) { + free_irq ( ip2config.irq[i], (void *)&pcName); + clear_requested_irq( ip2config.irq[i]); + } + } + class_destroy(ip2_class); + devfs_remove("ip2"); + if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) { + printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err); + } + put_tty_driver(ip2_tty_driver); + if ( ( err = unregister_chrdev ( IP2_IPL_MAJOR, pcIpl ) ) ) { + printk(KERN_ERR "IP2: failed to unregister IPL driver (%d)\n", err); + } + remove_proc_entry("ip2mem", &proc_root); + + // free memory + for (i = 0; i < IP2_MAX_BOARDS; i++) { + void *pB; +#ifdef CONFIG_PCI + if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) { + pci_disable_device(ip2config.pci_dev[i]); + ip2config.pci_dev[i] = NULL; + } +#endif + if ((pB = i2BoardPtrTable[i]) != 0 ) { + kfree ( pB ); + i2BoardPtrTable[i] = NULL; + } + if ((DevTableMem[i]) != NULL ) { + kfree ( DevTableMem[i] ); + DevTableMem[i] = NULL; + } + } + + /* Cleanup the iiEllis subsystem. */ + iiEllisCleanup(); +#ifdef IP2DEBUG_INIT + printk (KERN_DEBUG "IP2 Unloaded\n" ); +#endif +} +#endif /* MODULE */ + +static struct tty_operations ip2_ops = { + .open = ip2_open, + .close = ip2_close, + .write = ip2_write, + .put_char = ip2_putchar, + .flush_chars = ip2_flush_chars, + .write_room = ip2_write_room, + .chars_in_buffer = ip2_chars_in_buf, + .flush_buffer = ip2_flush_buffer, + .ioctl = ip2_ioctl, + .throttle = ip2_throttle, + .unthrottle = ip2_unthrottle, + .set_termios = ip2_set_termios, + .set_ldisc = ip2_set_line_discipline, + .stop = ip2_stop, + .start = ip2_start, + .hangup = ip2_hangup, + .read_proc = ip2_read_proc, + .tiocmget = ip2_tiocmget, + .tiocmset = ip2_tiocmset, +}; + +/******************************************************************************/ +/* Function: ip2_loadmain() */ +/* Parameters: irq, io from command line of insmod et. al. */ +/* pointer to fip firmware and firmware size for boards */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This was the required entry point for all drivers (now in ip2.c) */ +/* It performs all */ +/* initialisation of the devices and driver structures, and registers itself */ +/* with the relevant kernel modules. */ +/******************************************************************************/ +/* SA_INTERRUPT- if set blocks all interrupts else only this line */ +/* SA_SHIRQ - for shared irq PCI or maybe EISA only */ +/* SA_RANDOM - can be source for cert. random number generators */ +#define IP2_SA_FLAGS 0 + +int +ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) +{ + int i, j, box; + int err = 0; + int status = 0; + static int loaded; + i2eBordStrPtr pB = NULL; + int rc = -1; + + ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 ); + + /* process command line arguments to modprobe or + insmod i.e. iop & irqp */ + /* irqp and iop should ALWAYS be specified now... But we check + them individually just to be sure, anyways... */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if (iop) { + ip2config.addr[i] = iop[i]; + if (irqp) { + if( irqp[i] >= 0 ) { + ip2config.irq[i] = irqp[i]; + } else { + ip2config.irq[i] = 0; + } + // This is a little bit of a hack. If poll_only=1 on command + // line back in ip2.c OR all IRQs on all specified boards are + // explicitly set to 0, then drop to poll only mode and override + // PCI or EISA interrupts. This superceeds the old hack of + // triggering if all interrupts were zero (like da default). + // Still a hack but less prone to random acts of terrorism. + // + // What we really should do, now that the IRQ default is set + // to -1, is to use 0 as a hard coded, do not probe. + // + // /\/\|=mhw=|\/\/ + poll_only |= irqp[i]; + } + } + } + poll_only = !poll_only; + + Fip_firmware = firmware; + Fip_firmware_size = firmsize; + + /* Announce our presence */ + printk( KERN_INFO "%s version %s\n", pcName, pcVersion ); + + // ip2 can be unloaded and reloaded for no good reason + // we can't let that happen here or bad things happen + // second load hoses board but not system - fixme later + if (loaded) { + printk( KERN_INFO "Still loaded\n" ); + return 0; + } + loaded++; + + ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS); + if (!ip2_tty_driver) + return -ENOMEM; + + /* Initialise the iiEllis subsystem. */ + iiEllisInit(); + + /* Initialize arrays. */ + memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable ); + memset( DevTable, 0, sizeof DevTable ); + + /* Initialise all the boards we can find (up to the maximum). */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + switch ( ip2config.addr[i] ) { + case 0: /* skip this slot even if card is present */ + break; + default: /* ISA */ + /* ISA address must be specified */ + if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) { + printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n", + i, ip2config.addr[i] ); + ip2config.addr[i] = 0; + } else { + ip2config.type[i] = ISA; + + /* Check for valid irq argument, set for polling if invalid */ + if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) { + printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]); + ip2config.irq[i] = 0;// 0 is polling and is valid in that sense + } + } + break; + case PCI: +#ifdef CONFIG_PCI + { + struct pci_dev *pci_dev_i = NULL; + pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE, + PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i); + if (pci_dev_i != NULL) { + unsigned int addr; + + if (pci_enable_device(pci_dev_i)) { + printk( KERN_ERR "IP2: can't enable PCI device at %s\n", + pci_name(pci_dev_i)); + break; + } + ip2config.type[i] = PCI; + ip2config.pci_dev[i] = pci_dev_i; + status = + pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr); + if ( addr & 1 ) { + ip2config.addr[i]=(USHORT)(addr&0xfffe); + } else { + printk( KERN_ERR "IP2: PCI I/O address error\n"); + } + +// If the PCI BIOS assigned it, lets try and use it. If we +// can't acquire it or it screws up, deal with it then. + +// if (!is_valid_irq(pci_irq)) { +// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq); +// pci_irq = 0; +// } + ip2config.irq[i] = pci_dev_i->irq; + } else { // ann error + ip2config.addr[i] = 0; + if (status == PCIBIOS_DEVICE_NOT_FOUND) { + printk( KERN_ERR "IP2: PCI board %d not found\n", i ); + } else { + printk( KERN_ERR "IP2: PCI error 0x%x \n", status ); + } + } + } +#else + printk( KERN_ERR "IP2: PCI card specified but PCI support not\n"); + printk( KERN_ERR "IP2: configured in this kernel.\n"); + printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n"); +#endif /* CONFIG_PCI */ + break; + case EISA: + if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) { + /* Eisa_irq set as side effect, boo */ + ip2config.type[i] = EISA; + } + ip2config.irq[i] = Eisa_irq; + break; + } /* switch */ + } /* for */ + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( ip2config.addr[i] ) { + pB = kmalloc( sizeof(i2eBordStr), GFP_KERNEL); + if ( pB != NULL ) { + i2BoardPtrTable[i] = pB; + memset( pB, 0, sizeof(i2eBordStr) ); + iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer ); + iiReset( pB ); + } else { + printk(KERN_ERR "IP2: board memory allocation error\n"); + } + } + } + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( ( pB = i2BoardPtrTable[i] ) != NULL ) { + iiResetDelay( pB ); + break; + } + } + for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] != NULL ) { + ip2_init_board( i ); + } + } + + ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 ); + + ip2_tty_driver->owner = THIS_MODULE; + ip2_tty_driver->name = "ttyF"; + ip2_tty_driver->devfs_name = "tts/F"; + ip2_tty_driver->driver_name = pcDriver_name; + ip2_tty_driver->major = IP2_TTY_MAJOR; + ip2_tty_driver->minor_start = 0; + ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; + ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL; + ip2_tty_driver->init_termios = tty_std_termios; + ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; + ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; + tty_set_operations(ip2_tty_driver, &ip2_ops); + + ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 ); + + /* Register the tty devices. */ + if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) { + printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err); + put_tty_driver(ip2_tty_driver); + return -EINVAL; + } else + /* Register the IPL driver. */ + if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) { + printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err ); + } else { + /* create the sysfs class */ + ip2_class = class_create(THIS_MODULE, "ip2"); + if (IS_ERR(ip2_class)) { + err = PTR_ERR(ip2_class); + goto out_chrdev; + } + } + /* Register the read_procmem thing */ + if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) { + printk(KERN_ERR "IP2: failed to register read_procmem\n"); + } else { + + ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 ); + /* Register the interrupt handler or poll handler, depending upon the + * specified interrupt. + */ + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( 0 == ip2config.addr[i] ) { + continue; + } + + if ( NULL != ( pB = i2BoardPtrTable[i] ) ) { + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i), + NULL, "ipl%d", i); + err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i), + S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, + "ip2/ipl%d", i); + if (err) { + class_device_destroy(ip2_class, + MKDEV(IP2_IPL_MAJOR, 4 * i)); + goto out_class; + } + + class_device_create(ip2_class, NULL, + MKDEV(IP2_IPL_MAJOR, 4 * i + 1), + NULL, "stat%d", i); + err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1), + S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, + "ip2/stat%d", i); + if (err) { + class_device_destroy(ip2_class, + MKDEV(IP2_IPL_MAJOR, 4 * i + 1)); + goto out_class; + } + + for ( box = 0; box < ABS_MAX_BOXES; ++box ) + { + for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if ( pB->i2eChannelMap[box] & (1 << j) ) + { + tty_register_device(ip2_tty_driver, + j + ABS_BIGGEST_BOX * + (box+i*ABS_MAX_BOXES), NULL); + } + } + } + } + + if (poll_only) { +// Poll only forces driver to only use polling and +// to ignore the probed PCI or EISA interrupts. + ip2config.irq[i] = CIR_POLL; + } + if ( ip2config.irq[i] == CIR_POLL ) { +retry: + if (!TimerOn) { + PollTimer.expires = POLL_TIMEOUT; + add_timer ( &PollTimer ); + TimerOn = 1; + printk( KERN_INFO "IP2: polling\n"); + } + } else { + if (have_requested_irq(ip2config.irq[i])) + continue; + rc = request_irq( ip2config.irq[i], ip2_interrupt, + IP2_SA_FLAGS | (ip2config.type[i] == PCI ? SA_SHIRQ : 0), + pcName, (void *)&pcName); + if (rc) { + printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc); + ip2config.irq[i] = CIR_POLL; + printk( KERN_INFO "IP2: Polling %ld/sec.\n", + (POLL_TIMEOUT - jiffies)); + goto retry; + } + mark_requested_irq(ip2config.irq[i]); + /* Initialise the interrupt handler bottom half (aka slih). */ + } + } + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + if ( i2BoardPtrTable[i] ) { + set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */ + } + } + } + ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 ); + goto out; + +out_class: + class_destroy(ip2_class); +out_chrdev: + unregister_chrdev(IP2_IPL_MAJOR, "ip2"); +out: + return err; +} + +EXPORT_SYMBOL(ip2_loadmain); + +/******************************************************************************/ +/* Function: ip2_init_board() */ +/* Parameters: Index of board in configuration structure */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/* This function initializes the specified board. The loadware is copied to */ +/* the board, the channel structures are initialized, and the board details */ +/* are reported on the console. */ +/******************************************************************************/ +static void __init +ip2_init_board( int boardnum ) +{ + int i; + int nports = 0, nboxes = 0; + i2ChanStrPtr pCh; + i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; + + if ( !iiInitialize ( pB ) ) { + printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n", + pB->i2eBase, pB->i2eError ); + goto err_initialize; + } + printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1, + ip2config.addr[boardnum], ip2config.irq[boardnum] ); + + if (!request_region( ip2config.addr[boardnum], 8, pcName )) { + printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]); + goto err_initialize; + } + + if ( iiDownloadAll ( pB, (loadHdrStrPtr)Fip_firmware, 1, Fip_firmware_size ) + != II_DOWN_GOOD ) { + printk ( KERN_ERR "IP2: failed to download loadware\n" ); + goto err_release_region; + } else { + printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n", + pB->i2ePom.e.porVersion, + pB->i2ePom.e.porRevision, + pB->i2ePom.e.porSubRev, pB->i2eLVersion, + pB->i2eLRevision, pB->i2eLSub ); + } + + switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { + + default: + printk( KERN_ERR "IP2: Unknown board type, ID = %x\n", + pB->i2ePom.e.porID ); + nports = 0; + goto err_release_region; + break; + + case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */ + printk ( KERN_INFO "IP2: ISA-4\n" ); + nports = 4; + break; + + case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */ + printk ( KERN_INFO "IP2: ISA-8 std\n" ); + nports = 8; + break; + + case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */ + printk ( KERN_INFO "IP2: ISA-8 RJ11\n" ); + nports = 8; + break; + + case POR_ID_FIIEX: /* IntelliPort IIEX */ + { + int portnum = IP2_PORTS_PER_BOARD * boardnum; + int box; + + for( box = 0; box < ABS_MAX_BOXES; ++box ) { + if ( pB->i2eChannelMap[box] != 0 ) { + ++nboxes; + } + for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { + if ( pB->i2eChannelMap[box] & 1<< i ) { + ++nports; + } + } + } + DevTableMem[boardnum] = pCh = + kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL ); + if ( !pCh ) { + printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); + goto err_release_region; + } + if ( !i2InitChannels( pB, nports, pCh ) ) { + printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); + kfree ( pCh ); + goto err_release_region; + } + pB->i2eChannelPtr = &DevTable[portnum]; + pB->i2eChannelCnt = ABS_MOST_PORTS; + + for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) { + for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { + if ( pB->i2eChannelMap[box] & (1 << i) ) { + DevTable[portnum + i] = pCh; + pCh->port_index = portnum + i; + pCh++; + } + } + } + printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n", + nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 ); + } + goto ex_exit; + } + DevTableMem[boardnum] = pCh = + kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL ); + if ( !pCh ) { + printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); + goto err_release_region; + } + pB->i2eChannelPtr = pCh; + pB->i2eChannelCnt = nports; + if ( !i2InitChannels( pB, nports, pCh ) ) { + printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); + kfree ( pCh ); + goto err_release_region; + } + pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum]; + + for( i = 0; i < pB->i2eChannelCnt; ++i ) { + DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh; + pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i; + pCh++; + } +ex_exit: + INIT_WORK(&pB->tqueue_interrupt, (void(*)(void*)) ip2_interrupt_bh, pB); + return; + +err_release_region: + release_region(ip2config.addr[boardnum], 8); +err_initialize: + kfree ( pB ); + i2BoardPtrTable[boardnum] = NULL; + return; +} + +/******************************************************************************/ +/* Function: find_eisa_board ( int start_slot ) */ +/* Parameters: First slot to check */ +/* Returns: Address of EISA IntelliPort II controller */ +/* */ +/* Description: */ +/* This function searches for an EISA IntelliPort controller, starting */ +/* from the specified slot number. If the motherboard is not identified as an */ +/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */ +/* it returns the base address of the controller. */ +/******************************************************************************/ +static unsigned short __init +find_eisa_board( int start_slot ) +{ + int i, j; + unsigned int idm = 0; + unsigned int idp = 0; + unsigned int base = 0; + unsigned int value; + int setup_address; + int setup_irq; + int ismine = 0; + + /* + * First a check for an EISA motherboard, which we do by comparing the + * EISA ID registers for the system board and the first couple of slots. + * No slot ID should match the system board ID, but on an ISA or PCI + * machine the odds are that an empty bus will return similar values for + * each slot. + */ + i = 0x0c80; + value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3); + for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) { + j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3); + if ( value == j ) + return 0; + } + + /* + * OK, so we are inclined to believe that this is an EISA machine. Find + * an IntelliPort controller. + */ + for( i = start_slot; i < 16; i++ ) { + base = i << 12; + idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff); + idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff); + ismine = 0; + if ( idm == 0x0e8e ) { + if ( idp == 0x0281 || idp == 0x0218 ) { + ismine = 1; + } else if ( idp == 0x0282 || idp == 0x0283 ) { + ismine = 3; /* Can do edge-trigger */ + } + if ( ismine ) { + Eisa_slot = i; + break; + } + } + } + if ( !ismine ) + return 0; + + /* It's some sort of EISA card, but at what address is it configured? */ + + setup_address = base + 0xc88; + value = inb(base + 0xc86); + setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0; + + if ( (ismine & 2) && !(value & 0x10) ) { + ismine = 1; /* Could be edging, but not */ + } + + if ( Eisa_irq == 0 ) { + Eisa_irq = setup_irq; + } else if ( Eisa_irq != setup_irq ) { + printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" ); + } + +#ifdef IP2DEBUG_INIT +printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x", + base >> 12, idm, idp, setup_address); + if ( Eisa_irq ) { + printk(KERN_DEBUG ", Interrupt %d %s\n", + setup_irq, (ismine & 2) ? "(edge)" : "(level)"); + } else { + printk(KERN_DEBUG ", (polled)\n"); + } +#endif + return setup_address; +} + +/******************************************************************************/ +/* Function: set_irq() */ +/* Parameters: index to board in board table */ +/* IRQ to use */ +/* Returns: Success (0) */ +/* */ +/* Description: */ +/******************************************************************************/ +static void +set_irq( int boardnum, int boardIrq ) +{ + unsigned char tempCommand[16]; + i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; + unsigned long flags; + + /* + * Notify the boards they may generate interrupts. This is done by + * sending an in-line command to channel 0 on each board. This is why + * the channels have to be defined already. For each board, if the + * interrupt has never been defined, we must do so NOW, directly, since + * board will not send flow control or even give an interrupt until this + * is done. If polling we must send 0 as the interrupt parameter. + */ + + // We will get an interrupt here at the end of this function + + iiDisableMailIrq(pB); + + /* We build up the entire packet header. */ + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_INLINE; + CMD_COUNT_OF(tempCommand) = 2; + (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ; + (CMD_OF(tempCommand))[1] = boardIrq; + /* + * Write to FIFO; don't bother to adjust fifo capacity for this, since + * board will respond almost immediately after SendMail hit. + */ + WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); + iiWriteBuf(pB, tempCommand, 4); + WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); + pB->i2eUsingIrq = boardIrq; + pB->i2eOutMailWaiting |= MB_OUT_STUFFED; + + /* Need to update number of boards before you enable mailbox int */ + ++i2nBoards; + + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 6; + (CMD_OF(tempCommand))[0] = 88; // SILO + (CMD_OF(tempCommand))[1] = 64; // chars + (CMD_OF(tempCommand))[2] = 32; // ms + + (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK + (CMD_OF(tempCommand))[4] = 64; // chars + + (CMD_OF(tempCommand))[5] = 87; // HW_TEST + WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); + iiWriteBuf(pB, tempCommand, 8); + WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); + + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 1; + (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */ + iiWriteBuf(pB, tempCommand, 3); + +#ifdef XXX + // enable heartbeat for test porpoises + CHANNEL_OF(tempCommand) = 0; + PTYPE_OF(tempCommand) = PTYPE_BYPASS; + CMD_COUNT_OF(tempCommand) = 2; + (CMD_OF(tempCommand))[0] = 44; /* get ping */ + (CMD_OF(tempCommand))[1] = 200; /* 200 ms */ + WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); + iiWriteBuf(pB, tempCommand, 4); + WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); +#endif + + iiEnableMailIrq(pB); + iiSendPendingMail(pB); +} + +/******************************************************************************/ +/* Interrupt Handler Section */ +/******************************************************************************/ + +static inline void +service_all_boards(void) +{ + int i; + i2eBordStrPtr pB; + + /* Service every board on the list */ + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + pB = i2BoardPtrTable[i]; + if ( pB ) { + i2ServiceBoard( pB ); + } + } +} + + +/******************************************************************************/ +/* Function: ip2_interrupt_bh(pB) */ +/* Parameters: pB - pointer to the board structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* Service the board in a bottom half interrupt handler and then */ +/* reenable the board's interrupts if it has an IRQ number */ +/* */ +/******************************************************************************/ +static void +ip2_interrupt_bh(i2eBordStrPtr pB) +{ +// pB better well be set or we have a problem! We can only get +// here from the IMMEDIATE queue. Here, we process the boards. +// Checking pB doesn't cost much and it saves us from the sanity checkers. + + bh_counter++; + + if ( pB ) { + i2ServiceBoard( pB ); + if( pB->i2eUsingIrq ) { +// Re-enable his interrupts + iiEnableMailIrq(pB); + } + } +} + + +/******************************************************************************/ +/* Function: ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) */ +/* Parameters: irq - interrupt number */ +/* pointer to optional device ID structure */ +/* pointer to register structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* Our task here is simply to identify each board which needs servicing. */ +/* If we are queuing then, queue it to be serviced, and disable its irq */ +/* mask otherwise process the board directly. */ +/* */ +/* We could queue by IRQ but that just complicates things on both ends */ +/* with very little gain in performance (how many instructions does */ +/* it take to iterate on the immediate queue). */ +/* */ +/* */ +/******************************************************************************/ +static irqreturn_t +ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) +{ + int i; + i2eBordStrPtr pB; + int handled = 0; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq ); + + /* Service just the boards on the list using this irq */ + for( i = 0; i < i2nBoards; ++i ) { + pB = i2BoardPtrTable[i]; + +// Only process those boards which match our IRQ. +// IRQ = 0 for polled boards, we won't poll "IRQ" boards + + if ( pB && (pB->i2eUsingIrq == irq) ) { + handled = 1; +#ifdef USE_IQI + + if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) { +// Disable his interrupt (will be enabled when serviced) +// This is mostly to protect from reentrancy. + iiDisableMailIrq(pB); + +// Park the board on the immediate queue for processing. + schedule_work(&pB->tqueue_interrupt); + +// Make sure the immediate queue is flagged to fire. + } +#else +// We are using immediate servicing here. This sucks and can +// cause all sorts of havoc with ppp and others. The failsafe +// check on iiSendPendingMail could also throw a hairball. + i2ServiceBoard( pB ); +#endif /* USE_IQI */ + } + } + + ++irq_counter; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); + return IRQ_RETVAL(handled); +} + +/******************************************************************************/ +/* Function: ip2_poll(unsigned long arg) */ +/* Parameters: ? */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function calls the library routine i2ServiceBoard for each board in */ +/* the board table. This is used instead of the interrupt routine when polled */ +/* mode is specified. */ +/******************************************************************************/ +static void +ip2_poll(unsigned long arg) +{ + ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 ); + + TimerOn = 0; // it's the truth but not checked in service + + // Just polled boards, IRQ = 0 will hit all non-interrupt boards. + // It will NOT poll boards handled by hard interrupts. + // The issue of queued BH interrups is handled in ip2_interrupt(). + ip2_interrupt(0, NULL, NULL); + + PollTimer.expires = POLL_TIMEOUT; + add_timer( &PollTimer ); + TimerOn = 1; + + ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); +} + +static void do_input(void *p) +{ + i2ChanStrPtr pCh = p; + unsigned long flags; + + ip2trace(CHANN, ITRC_INPUT, 21, 0 ); + + // Data input + if ( pCh->pTTY != NULL ) { + READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) + if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) { + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) + i2Input( pCh ); + } else + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) + } else { + ip2trace(CHANN, ITRC_INPUT, 22, 0 ); + + i2InputFlush( pCh ); + } +} + +// code duplicated from n_tty (ldisc) +static inline void isig(int sig, struct tty_struct *tty, int flush) +{ + if (tty->pgrp > 0) + kill_pg(tty->pgrp, sig, 1); + if (flush || !L_NOFLSH(tty)) { + if ( tty->ldisc.flush_buffer ) + tty->ldisc.flush_buffer(tty); + i2InputFlush( tty->driver_data ); + } +} + +static void do_status(void *p) +{ + i2ChanStrPtr pCh = p; + int status; + + status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) ); + + ip2trace (CHANN, ITRC_STATUS, 21, 1, status ); + + if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) { + if ( (status & I2_BRK) ) { + // code duplicated from n_tty (ldisc) + if (I_IGNBRK(pCh->pTTY)) + goto skip_this; + if (I_BRKINT(pCh->pTTY)) { + isig(SIGINT, pCh->pTTY, 1); + goto skip_this; + } + wake_up_interruptible(&pCh->pTTY->read_wait); + } +#ifdef NEVER_HAPPENS_AS_SETUP_XXX + // and can't work because we don't know the_char + // as the_char is reported on a separate path + // The intelligent board does this stuff as setup + { + char brkf = TTY_NORMAL; + unsigned char brkc = '\0'; + unsigned char tmp; + if ( (status & I2_BRK) ) { + brkf = TTY_BREAK; + brkc = '\0'; + } + else if (status & I2_PAR) { + brkf = TTY_PARITY; + brkc = the_char; + } else if (status & I2_FRA) { + brkf = TTY_FRAME; + brkc = the_char; + } else if (status & I2_OVR) { + brkf = TTY_OVERRUN; + brkc = the_char; + } + tmp = pCh->pTTY->real_raw; + pCh->pTTY->real_raw = 0; + pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 ); + pCh->pTTY->real_raw = tmp; + } +#endif /* NEVER_HAPPENS_AS_SETUP_XXX */ + } +skip_this: + + if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) { + wake_up_interruptible(&pCh->delta_msr_wait); + + if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) { + if ( status & I2_DCD ) { + if ( pCh->wopen ) { + wake_up_interruptible ( &pCh->open_wait ); + } + } else { + if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) { + tty_hangup( pCh->pTTY ); + } + } + } + } + + ip2trace (CHANN, ITRC_STATUS, 26, 0 ); +} + +/******************************************************************************/ +/* Device Open/Close/Ioctl Entry Point Section */ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: open_sanity_check() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* Verifies the structure magic numbers and cross links. */ +/******************************************************************************/ +#ifdef IP2DEBUG_OPEN +static void +open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd ) +{ + if ( pBrd->i2eValid != I2E_MAGIC ) { + printk(KERN_ERR "IP2: invalid board structure\n" ); + } else if ( pBrd != pCh->pMyBord ) { + printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n", + pCh->pMyBord ); + } else if ( pBrd->i2eChannelCnt < pCh->port_index ) { + printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index ); + } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) { + } else { + printk(KERN_INFO "IP2: all pointers check out!\n" ); + } +} +#endif + + +/******************************************************************************/ +/* Function: ip2_open() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: (MANDATORY) */ +/* A successful device open has to run a gauntlet of checks before it */ +/* completes. After some sanity checking and pointer setup, the function */ +/* blocks until all conditions are satisfied. It then initialises the port to */ +/* the default characteristics and returns. */ +/******************************************************************************/ +static int +ip2_open( PTTY tty, struct file *pFile ) +{ + wait_queue_t wait; + int rc = 0; + int do_clocal = 0; + i2ChanStrPtr pCh = DevTable[tty->index]; + + ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 ); + + if ( pCh == NULL ) { + return -ENODEV; + } + /* Setup pointer links in device and tty structures */ + pCh->pTTY = tty; + tty->driver_data = pCh; + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG \ + "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n", + tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index); + open_sanity_check ( pCh, pCh->pMyBord ); +#endif + + i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + serviceOutgoingFifo( pCh->pMyBord ); + + /* Block here until the port is ready (per serial and istallion) */ + /* + * 1. If the port is in the middle of closing wait for the completion + * and then return the appropriate error. + */ + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->close_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { + if ( pCh->flags & ASYNC_CLOSING ) { + schedule(); + } + if ( tty_hung_up_p(pFile) ) { + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->close_wait, &wait); + return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS; + } + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->close_wait, &wait); + + /* + * 3. Handle a non-blocking open of a normal port. + */ + if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<flags |= ASYNC_NORMAL_ACTIVE; + goto noblock; + } + /* + * 4. Now loop waiting for the port to be free and carrier present + * (if required). + */ + if ( tty->termios->c_cflag & CLOCAL ) + do_clocal = 1; + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal); +#endif + + ++pCh->wopen; + + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->open_wait, &wait); + + for(;;) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + set_current_state( TASK_INTERRUPTIBLE ); + serviceOutgoingFifo( pCh->pMyBord ); + if ( tty_hung_up_p(pFile) ) { + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->open_wait, &wait); + return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS; + } + if (!(pCh->flags & ASYNC_CLOSING) && + (do_clocal || (pCh->dataSetIn & I2_DCD) )) { + rc = 0; + break; + } + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "ASYNC_CLOSING = %s\n", + (pCh->flags & ASYNC_CLOSING)?"True":"False"); + printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n"); +#endif + ip2trace (CHANN, ITRC_OPEN, 3, 2, 0, + (pCh->flags & ASYNC_CLOSING) ); + /* check for signal */ + if (signal_pending(current)) { + rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); + break; + } + schedule(); + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->open_wait, &wait); + + --pCh->wopen; //why count? + + ip2trace (CHANN, ITRC_OPEN, 4, 0 ); + + if (rc != 0 ) { + return rc; + } + pCh->flags |= ASYNC_NORMAL_ACTIVE; + +noblock: + + /* first open - Assign termios structure to port */ + if ( tty->count == 1 ) { + i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + /* Now we must send the termios settings to the loadware */ + set_params( pCh, NULL ); + } + + /* + * Now set any i2lib options. These may go away if the i2lib code ends + * up rolled into the mainline. + */ + pCh->channelOptions |= CO_NBLOCK_WRITE; + +#ifdef IP2DEBUG_OPEN + printk (KERN_DEBUG "IP2: open completed\n" ); +#endif + serviceOutgoingFifo( pCh->pMyBord ); + + ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 ); + + return 0; +} + +/******************************************************************************/ +/* Function: ip2_close() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_close( PTTY tty, struct file *pFile ) +{ + i2ChanStrPtr pCh = tty->driver_data; + + if ( !pCh ) { + return; + } + + ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 ); + +#ifdef IP2DEBUG_OPEN + printk(KERN_DEBUG "IP2:close %s:\n",tty->name); +#endif + + if ( tty_hung_up_p ( pFile ) ) { + + ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 ); + + return; + } + if ( tty->count > 1 ) { /* not the last close */ + + ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 ); + + return; + } + pCh->flags |= ASYNC_CLOSING; // last close actually + + tty->closing = 1; + + if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) { + /* + * Before we drop DTR, make sure the transmitter has completely drained. + * This uses an timeout, after which the close + * completes. + */ + ip2_wait_until_sent(tty, pCh->ClosingWaitTime ); + } + /* + * At this point we stop accepting input. Here we flush the channel + * input buffer which will allow the board to send up more data. Any + * additional input is tossed at interrupt/poll time. + */ + i2InputFlush( pCh ); + + /* disable DSS reporting */ + i2QueueCommands(PTYPE_INLINE, pCh, 100, 4, + CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + if ( !tty || (tty->termios->c_cflag & HUPCL) ) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + } + + serviceOutgoingFifo ( pCh->pMyBord ); + + if ( tty->driver->flush_buffer ) + tty->driver->flush_buffer(tty); + if ( tty->ldisc.flush_buffer ) + tty->ldisc.flush_buffer(tty); + tty->closing = 0; + + pCh->pTTY = NULL; + + if (pCh->wopen) { + if (pCh->ClosingDelay) { + msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay)); + } + wake_up_interruptible(&pCh->open_wait); + } + + pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); + wake_up_interruptible(&pCh->close_wait); + +#ifdef IP2DEBUG_OPEN + DBG_CNT("ip2_close: after wakeups--"); +#endif + + + ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 ); + + return; +} + +/******************************************************************************/ +/* Function: ip2_hangup() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_hangup ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + + if( !pCh ) { + return; + } + + ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 ); + + ip2_flush_buffer(tty); + + /* disable DSS reporting */ + + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP); + i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + if ( (tty->termios->c_cflag & HUPCL) ) { + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + } + i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, + CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + serviceOutgoingFifo ( pCh->pMyBord ); + + wake_up_interruptible ( &pCh->delta_msr_wait ); + + pCh->flags &= ~ASYNC_NORMAL_ACTIVE; + pCh->pTTY = NULL; + wake_up_interruptible ( &pCh->open_wait ); + + ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 ); +} + +/******************************************************************************/ +/******************************************************************************/ +/* Device Output Section */ +/******************************************************************************/ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_write() */ +/* Parameters: Pointer to tty structure */ +/* Flag denoting data is in user (1) or kernel (0) space */ +/* Pointer to data */ +/* Number of bytes to write */ +/* Returns: Number of bytes actually written */ +/* */ +/* Description: (MANDATORY) */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_write( PTTY tty, const unsigned char *pData, int count) +{ + i2ChanStrPtr pCh = tty->driver_data; + int bytesSent = 0; + unsigned long flags; + + ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 ); + + /* Flush out any buffered data left over from ip2_putchar() calls. */ + ip2_flush_chars( tty ); + + /* This is the actual move bit. Make sure it does what we need!!!!! */ + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + bytesSent = i2Output( pCh, pData, count, 0 ); + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + + ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent ); + + return bytesSent > 0 ? bytesSent : 0; +} + +/******************************************************************************/ +/* Function: ip2_putchar() */ +/* Parameters: Pointer to tty structure */ +/* Character to write */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_putchar( PTTY tty, unsigned char ch ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + +// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch ); + + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + pCh->Pbuf[pCh->Pbuf_stuff++] = ch; + if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) { + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + ip2_flush_chars( tty ); + } else + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + +// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch ); +} + +/******************************************************************************/ +/* Function: ip2_flush_chars() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/******************************************************************************/ +static void +ip2_flush_chars( PTTY tty ) +{ + int strip; + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + if ( pCh->Pbuf_stuff ) { + +// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip ); + + // + // We may need to restart i2Output if it does not fullfill this request + // + strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff, 0 ); + if ( strip != pCh->Pbuf_stuff ) { + memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip ); + } + pCh->Pbuf_stuff -= strip; + } + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); +} + +/******************************************************************************/ +/* Function: ip2_write_room() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Number of bytes that the driver can accept */ +/* */ +/* Description: */ +/* */ +/******************************************************************************/ +static int +ip2_write_room ( PTTY tty ) +{ + int bytesFree; + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff; + READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + + ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree ); + + return ((bytesFree > 0) ? bytesFree : 0); +} + +/******************************************************************************/ +/* Function: ip2_chars_in_buf() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Number of bytes queued for transmission */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_chars_in_buf ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + int rc; + unsigned long flags; + + ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff ); + +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n", + pCh->Obuf_char_count + pCh->Pbuf_stuff, + pCh->Obuf_char_count, pCh->Pbuf_stuff ); +#endif + READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags); + rc = pCh->Obuf_char_count; + READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags); + READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + rc += pCh->Pbuf_stuff; + READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + return rc; +} + +/******************************************************************************/ +/* Function: ip2_flush_buffer() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_flush_buffer( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + + ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 ); + +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: flush buffer\n" ); +#endif + WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); + pCh->Pbuf_stuff = 0; + WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); + i2FlushOutput( pCh ); + ip2_owake(tty); + + ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 ); + +} + +/******************************************************************************/ +/* Function: ip2_wait_until_sent() */ +/* Parameters: Pointer to tty structure */ +/* Timeout for wait. */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function is used in place of the normal tty_wait_until_sent, which */ +/* only waits for the driver buffers to be empty (or rather, those buffers */ +/* reported by chars_in_buffer) which doesn't work for IP2 due to the */ +/* indeterminate number of bytes buffered on the board. */ +/******************************************************************************/ +static void +ip2_wait_until_sent ( PTTY tty, int timeout ) +{ + int i = jiffies; + i2ChanStrPtr pCh = tty->driver_data; + + tty_wait_until_sent(tty, timeout ); + if ( (i = timeout - (jiffies -i)) > 0) + i2DrainOutput( pCh, i ); +} + +/******************************************************************************/ +/******************************************************************************/ +/* Device Input Section */ +/******************************************************************************/ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_throttle() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_throttle ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "IP2: throttle\n" ); +#endif + /* + * Signal the poll/interrupt handlers not to forward incoming data to + * the line discipline. This will cause the buffers to fill up in the + * library and thus cause the library routines to send the flow control + * stuff. + */ + pCh->throttled = 1; +} + +/******************************************************************************/ +/* Function: ip2_unthrottle() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_unthrottle ( PTTY tty ) +{ + i2ChanStrPtr pCh = tty->driver_data; + unsigned long flags; + +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "IP2: unthrottle\n" ); +#endif + + /* Pass incoming data up to the line discipline again. */ + pCh->throttled = 0; + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); + serviceOutgoingFifo( pCh->pMyBord ); + READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) + if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) { + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) +#ifdef IP2DEBUG_READ + printk (KERN_DEBUG "i2Input called from unthrottle\n" ); +#endif + i2Input( pCh ); + } else + READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) +} + +static void +ip2_start ( PTTY tty ) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME); +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: start tx\n" ); +#endif +} + +static void +ip2_stop ( PTTY tty ) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND); +#ifdef IP2DEBUG_WRITE + printk (KERN_DEBUG "IP2: stop tx\n" ); +#endif +} + +/******************************************************************************/ +/* Device Ioctl Section */ +/******************************************************************************/ + +static int ip2_tiocmget(struct tty_struct *tty, struct file *file) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; +#ifdef ENABLE_DSSNOW + wait_queue_t wait; +#endif + + if (pCh == NULL) + return -ENODEV; + +/* + FIXME - the following code is causing a NULL pointer dereference in + 2.3.51 in an interrupt handler. It's suppose to prompt the board + to return the DSS signal status immediately. Why doesn't it do + the same thing in 2.2.14? +*/ + +/* This thing is still busted in the 1.2.12 driver on 2.4.x + and even hoses the serial console so the oops can be trapped. + /\/\|=mhw=|\/\/ */ + +#ifdef ENABLE_DSSNOW + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW); + + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->dss_now_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + serviceOutgoingFifo( pCh->pMyBord ); + + schedule(); + + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->dss_now_wait, &wait); + + if (signal_pending(current)) { + return -EINTR; + } +#endif + return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0) + | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0) + | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0) + | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0) + | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0) + | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); +} + +static int ip2_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + i2ChanStrPtr pCh = DevTable[tty->index]; + + if (pCh == NULL) + return -ENODEV; + + if (set & TIOCM_RTS) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP); + pCh->dataSetOut |= I2_RTS; + } + if (set & TIOCM_DTR) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP); + pCh->dataSetOut |= I2_DTR; + } + + if (clear & TIOCM_RTS) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN); + pCh->dataSetOut &= ~I2_RTS; + } + if (clear & TIOCM_DTR) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN); + pCh->dataSetOut &= ~I2_DTR; + } + serviceOutgoingFifo( pCh->pMyBord ); + return 0; +} + +/******************************************************************************/ +/* Function: ip2_ioctl() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to file structure */ +/* Command */ +/* Argument */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) +{ + wait_queue_t wait; + i2ChanStrPtr pCh = DevTable[tty->index]; + i2eBordStrPtr pB; + struct async_icount cprev, cnow; /* kernel counter temps */ + struct serial_icounter_struct __user *p_cuser; + int rc = 0; + unsigned long flags; + void __user *argp = (void __user *)arg; + + if ( pCh == NULL ) + return -ENODEV; + + pB = pCh->pMyBord; + + ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg ); + +#ifdef IP2DEBUG_IOCTL + printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg ); +#endif + + switch(cmd) { + case TIOCGSERIAL: + + ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc ); + + rc = get_serial_info(pCh, argp); + if (rc) + return rc; + break; + + case TIOCSSERIAL: + + ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc ); + + rc = set_serial_info(pCh, argp); + if (rc) + return rc; + break; + + case TCXONC: + rc = tty_check_change(tty); + if (rc) + return rc; + switch (arg) { + case TCOOFF: + //return -ENOIOCTLCMD; + break; + case TCOON: + //return -ENOIOCTLCMD; + break; + case TCIOFF: + if (STOP_CHAR(tty) != __DISABLED_CHAR) { + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, + CMD_XMIT_NOW(STOP_CHAR(tty))); + } + break; + case TCION: + if (START_CHAR(tty) != __DISABLED_CHAR) { + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, + CMD_XMIT_NOW(START_CHAR(tty))); + } + break; + default: + return -EINVAL; + } + return 0; + + case TCSBRK: /* SVID version: non-zero arg --> no break */ + rc = tty_check_change(tty); + + ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc ); + + if (!rc) { + ip2_wait_until_sent(tty,0); + if (!arg) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250)); + serviceOutgoingFifo( pCh->pMyBord ); + } + } + break; + + case TCSBRKP: /* support for POSIX tcsendbreak() */ + rc = tty_check_change(tty); + + ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc ); + + if (!rc) { + ip2_wait_until_sent(tty,0); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_SEND_BRK(arg ? arg*100 : 250)); + serviceOutgoingFifo ( pCh->pMyBord ); + } + break; + + case TIOCGSOFTCAR: + + ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc ); + + rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); + if (rc) + return rc; + break; + + case TIOCSSOFTCAR: + + ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc ); + + rc = get_user(arg,(unsigned long __user *) argp); + if (rc) + return rc; + tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) + | (arg ? CLOCAL : 0)); + + break; + + /* + * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask + * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS + * for masking). Caller should use TIOCGICOUNT to see which one it was + */ + case TIOCMIWAIT: + WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); + cprev = pCh->icount; /* note the counters on entry */ + WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, + CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP); + init_waitqueue_entry(&wait, current); + add_wait_queue(&pCh->delta_msr_wait, &wait); + set_current_state( TASK_INTERRUPTIBLE ); + + serviceOutgoingFifo( pCh->pMyBord ); + for(;;) { + ip2trace (CHANN, ITRC_IOCTL, 10, 0 ); + + schedule(); + + ip2trace (CHANN, ITRC_IOCTL, 11, 0 ); + + /* see if a signal did it */ + if (signal_pending(current)) { + rc = -ERESTARTSYS; + break; + } + WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); + cnow = pCh->icount; /* atomic copy */ + WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); + if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && + cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { + rc = -EIO; /* no change => rc */ + break; + } + if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || + ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || + ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || + ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { + rc = 0; + break; + } + cprev = cnow; + } + set_current_state( TASK_RUNNING ); + remove_wait_queue(&pCh->delta_msr_wait, &wait); + + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, + CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); + if ( ! (pCh->flags & ASYNC_CHECK_CD)) { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP); + } + serviceOutgoingFifo( pCh->pMyBord ); + return rc; + break; + + /* + * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) + * Return: write counters to the user passed counter struct + * NB: both 1->0 and 0->1 transitions are counted except for RI where + * only 0->1 is counted. The controller is quite capable of counting + * both, but this done to preserve compatibility with the standard + * serial driver. + */ + case TIOCGICOUNT: + ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc ); + + WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); + cnow = pCh->icount; + WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); + p_cuser = argp; + rc = put_user(cnow.cts, &p_cuser->cts); + rc = put_user(cnow.dsr, &p_cuser->dsr); + rc = put_user(cnow.rng, &p_cuser->rng); + rc = put_user(cnow.dcd, &p_cuser->dcd); + rc = put_user(cnow.rx, &p_cuser->rx); + rc = put_user(cnow.tx, &p_cuser->tx); + rc = put_user(cnow.frame, &p_cuser->frame); + rc = put_user(cnow.overrun, &p_cuser->overrun); + rc = put_user(cnow.parity, &p_cuser->parity); + rc = put_user(cnow.brk, &p_cuser->brk); + rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); + break; + + /* + * The rest are not supported by this driver. By returning -ENOIOCTLCMD they + * will be passed to the line discipline for it to handle. + */ + case TIOCSERCONFIG: + case TIOCSERGWILD: + case TIOCSERGETLSR: + case TIOCSERSWILD: + case TIOCSERGSTRUCT: + case TIOCSERGETMULTI: + case TIOCSERSETMULTI: + + default: + ip2trace (CHANN, ITRC_IOCTL, 12, 0 ); + + rc = -ENOIOCTLCMD; + break; + } + + ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 ); + + return rc; +} + +/******************************************************************************/ +/* Function: GetSerialInfo() */ +/* Parameters: Pointer to channel structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This is to support the setserial command, and requires processing of the */ +/* standard Linux serial structure. */ +/******************************************************************************/ +static int +get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo ) +{ + struct serial_struct tmp; + + memset ( &tmp, 0, sizeof(tmp) ); + tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16]; + if (BID_HAS_654(tmp.type)) { + tmp.type = PORT_16650; + } else { + tmp.type = PORT_CIRRUS; + } + tmp.line = pCh->port_index; + tmp.port = pCh->pMyBord->i2eBase; + tmp.irq = ip2config.irq[pCh->port_index/64]; + tmp.flags = pCh->flags; + tmp.baud_base = pCh->BaudBase; + tmp.close_delay = pCh->ClosingDelay; + tmp.closing_wait = pCh->ClosingWaitTime; + tmp.custom_divisor = pCh->BaudDivisor; + return copy_to_user(retinfo,&tmp,sizeof(*retinfo)); +} + +/******************************************************************************/ +/* Function: SetSerialInfo() */ +/* Parameters: Pointer to channel structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This function provides support for setserial, which uses the TIOCSSERIAL */ +/* ioctl. Not all setserial parameters are relevant. If the user attempts to */ +/* change the IRQ, address or type of the port the ioctl fails. */ +/******************************************************************************/ +static int +set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info ) +{ + struct serial_struct ns; + int old_flags, old_baud_divisor; + + if (copy_from_user(&ns, new_info, sizeof (ns))) + return -EFAULT; + + /* + * We don't allow setserial to change IRQ, board address, type or baud + * base. Also line nunber as such is meaningless but we use it for our + * array index so it is fixed also. + */ + if ( (ns.irq != ip2config.irq[pCh->port_index]) + || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase))) + || (ns.baud_base != pCh->BaudBase) + || (ns.line != pCh->port_index) ) { + return -EINVAL; + } + + old_flags = pCh->flags; + old_baud_divisor = pCh->BaudDivisor; + + if ( !capable(CAP_SYS_ADMIN) ) { + if ( ( ns.close_delay != pCh->ClosingDelay ) || + ( (ns.flags & ~ASYNC_USR_MASK) != + (pCh->flags & ~ASYNC_USR_MASK) ) ) { + return -EPERM; + } + + pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) | + (ns.flags & ASYNC_USR_MASK); + pCh->BaudDivisor = ns.custom_divisor; + } else { + pCh->flags = (pCh->flags & ~ASYNC_FLAGS) | + (ns.flags & ASYNC_FLAGS); + pCh->BaudDivisor = ns.custom_divisor; + pCh->ClosingDelay = ns.close_delay * HZ/100; + pCh->ClosingWaitTime = ns.closing_wait * HZ/100; + } + + if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) ) + || (old_baud_divisor != pCh->BaudDivisor) ) { + // Invalidate speed and reset parameters + set_params( pCh, NULL ); + } + + return 0; +} + +/******************************************************************************/ +/* Function: ip2_set_termios() */ +/* Parameters: Pointer to tty structure */ +/* Pointer to old termios structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_set_termios( PTTY tty, struct termios *old_termios ) +{ + i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data; + +#ifdef IP2DEBUG_IOCTL + printk (KERN_DEBUG "IP2: set termios %p\n", old_termios ); +#endif + + set_params( pCh, old_termios ); +} + +/******************************************************************************/ +/* Function: ip2_set_line_discipline() */ +/* Parameters: Pointer to tty structure */ +/* Returns: Nothing */ +/* */ +/* Description: Does nothing */ +/* */ +/* */ +/******************************************************************************/ +static void +ip2_set_line_discipline ( PTTY tty ) +{ +#ifdef IP2DEBUG_IOCTL + printk (KERN_DEBUG "IP2: set line discipline\n" ); +#endif + + ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 ); + +} + +/******************************************************************************/ +/* Function: SetLine Characteristics() */ +/* Parameters: Pointer to channel structure */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* This routine is called to update the channel structure with the new line */ +/* characteristics, and send the appropriate commands to the board when they */ +/* change. */ +/******************************************************************************/ +static void +set_params( i2ChanStrPtr pCh, struct termios *o_tios ) +{ + tcflag_t cflag, iflag, lflag; + char stop_char, start_char; + struct termios dummy; + + lflag = pCh->pTTY->termios->c_lflag; + cflag = pCh->pTTY->termios->c_cflag; + iflag = pCh->pTTY->termios->c_iflag; + + if (o_tios == NULL) { + dummy.c_lflag = ~lflag; + dummy.c_cflag = ~cflag; + dummy.c_iflag = ~iflag; + o_tios = &dummy; + } + + { + switch ( cflag & CBAUD ) { + case B0: + i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); + pCh->dataSetOut &= ~(I2_DTR | I2_RTS); + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); + pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag); + goto service_it; + break; + case B38400: + /* + * This is the speed that is overloaded with all the other high + * speeds, depending upon the flag settings. + */ + if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) { + pCh->speed = CBR_57600; + } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) { + pCh->speed = CBR_115200; + } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) { + pCh->speed = CBR_C1; + } else { + pCh->speed = CBR_38400; + } + break; + case B50: pCh->speed = CBR_50; break; + case B75: pCh->speed = CBR_75; break; + case B110: pCh->speed = CBR_110; break; + case B134: pCh->speed = CBR_134; break; + case B150: pCh->speed = CBR_150; break; + case B200: pCh->speed = CBR_200; break; + case B300: pCh->speed = CBR_300; break; + case B600: pCh->speed = CBR_600; break; + case B1200: pCh->speed = CBR_1200; break; + case B1800: pCh->speed = CBR_1800; break; + case B2400: pCh->speed = CBR_2400; break; + case B4800: pCh->speed = CBR_4800; break; + case B9600: pCh->speed = CBR_9600; break; + case B19200: pCh->speed = CBR_19200; break; + case B57600: pCh->speed = CBR_57600; break; + case B115200: pCh->speed = CBR_115200; break; + case B153600: pCh->speed = CBR_153600; break; + case B230400: pCh->speed = CBR_230400; break; + case B307200: pCh->speed = CBR_307200; break; + case B460800: pCh->speed = CBR_460800; break; + case B921600: pCh->speed = CBR_921600; break; + default: pCh->speed = CBR_9600; break; + } + if ( pCh->speed == CBR_C1 ) { + // Process the custom speed parameters. + int bps = pCh->BaudBase / pCh->BaudDivisor; + if ( bps == 921600 ) { + pCh->speed = CBR_921600; + } else { + bps = bps/10; + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) ); + } + } + i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed)); + + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); + pCh->dataSetOut |= (I2_DTR | I2_RTS); + } + if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) + { + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, + CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1)); + } + if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) + { + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, + CMD_SETPAR( + (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP) + ) + ); + } + /* byte size and parity */ + if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) + { + int datasize; + switch ( cflag & CSIZE ) { + case CS5: datasize = CSZ_5; break; + case CS6: datasize = CSZ_6; break; + case CS7: datasize = CSZ_7; break; + case CS8: datasize = CSZ_8; break; + default: datasize = CSZ_5; break; /* as per serial.c */ + } + i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) ); + } + /* Process CTS flow control flag setting */ + if ( (cflag & CRTSCTS) ) { + i2QueueCommands(PTYPE_INLINE, pCh, 100, + 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB); + } else { + i2QueueCommands(PTYPE_INLINE, pCh, 100, + 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); + } + // + // Process XON/XOFF flow control flags settings + // + stop_char = STOP_CHAR(pCh->pTTY); + start_char = START_CHAR(pCh->pTTY); + + //////////// can't be \000 + if (stop_char == __DISABLED_CHAR ) + { + stop_char = ~__DISABLED_CHAR; + } + if (start_char == __DISABLED_CHAR ) + { + start_char = ~__DISABLED_CHAR; + } + ///////////////////////////////// + + if ( o_tios->c_cc[VSTART] != start_char ) + { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char)); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char)); + } + if ( o_tios->c_cc[VSTOP] != stop_char ) + { + i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char)); + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char)); + } + if (stop_char == __DISABLED_CHAR ) + { + stop_char = ~__DISABLED_CHAR; //TEST123 + goto no_xoff; + } + if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) + { + if ( iflag & IXOFF ) { // Enable XOFF output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON)); + } else { // Disable XOFF output flow control +no_xoff: + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE)); + } + } + if (start_char == __DISABLED_CHAR ) + { + goto no_xon; + } + if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) + { + if ( iflag & IXON ) { + if ( iflag & IXANY ) { // Enable XON/XANY output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY)); + } else { // Enable XON output flow control + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON)); + } + } else { // Disable XON output flow control +no_xon: + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE)); + } + } + if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) + { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0))); + } + if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) + { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, + CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB)); + } + + if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) + ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) + { + char brkrpt = 0; + char parrpt = 0; + + if ( iflag & IGNBRK ) { /* Ignore breaks altogether */ + /* Ignore breaks altogether */ + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP); + } else { + if ( iflag & BRKINT ) { + if ( iflag & PARMRK ) { + brkrpt = 0x0a; // exception an inline triple + } else { + brkrpt = 0x1a; // exception and NULL + } + brkrpt |= 0x04; // flush input + } else { + if ( iflag & PARMRK ) { + brkrpt = 0x0b; //POSIX triple \0377 \0 \0 + } else { + brkrpt = 0x01; // Null only + } + } + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt)); + } + + if (iflag & IGNPAR) { + parrpt = 0x20; + /* would be 2 for not cirrus bug */ + /* would be 0x20 cept for cirrus bug */ + } else { + if ( iflag & PARMRK ) { + /* + * Replace error characters with 3-byte sequence (\0377,\0,char) + */ + parrpt = 0x04 ; + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0)); + } else { + parrpt = 0x03; + } + } + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt)); + } + if (cflag & CLOCAL) { + // Status reporting fails for DCD if this is off + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP); + pCh->flags &= ~ASYNC_CHECK_CD; + } else { + i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP); + pCh->flags |= ASYNC_CHECK_CD; + } + +service_it: + i2DrainOutput( pCh, 100 ); +} + +/******************************************************************************/ +/* IPL Device Section */ +/******************************************************************************/ + +/******************************************************************************/ +/* Function: ip2_ipl_read() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Pointer to data */ +/* Number of bytes to read */ +/* Returns: Success or failure */ +/* */ +/* Description: Ugly */ +/* */ +/* */ +/******************************************************************************/ + +static +ssize_t +ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off ) +{ + unsigned int minor = iminor(pFile->f_dentry->d_inode); + int rc = 0; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count ); +#endif + + switch( minor ) { + case 0: // IPL device + rc = -EINVAL; + break; + case 1: // Status dump + rc = -EINVAL; + break; + case 2: // Ping device + rc = -EINVAL; + break; + case 3: // Trace device + rc = DumpTraceBuffer ( pData, count ); + break; + case 4: // Trace device + rc = DumpFifoBuffer ( pData, count ); + break; + default: + rc = -ENODEV; + break; + } + return rc; +} + +static int +DumpFifoBuffer ( char __user *pData, int count ) +{ +#ifdef DEBUG_FIFO + int rc; + rc = copy_to_user(pData, DBGBuf, count); + + printk(KERN_DEBUG "Last index %d\n", I ); + + return count; +#endif /* DEBUG_FIFO */ + return 0; +} + +static int +DumpTraceBuffer ( char __user *pData, int count ) +{ +#ifdef IP2DEBUG_TRACE + int rc; + int dumpcount; + int chunk; + int *pIndex = (int __user *)pData; + + if ( count < (sizeof(int) * 6) ) { + return -EIO; + } + rc = put_user(tracewrap, pIndex ); + rc = put_user(TRACEMAX, ++pIndex ); + rc = put_user(tracestrip, ++pIndex ); + rc = put_user(tracestuff, ++pIndex ); + pData += sizeof(int) * 6; + count -= sizeof(int) * 6; + + dumpcount = tracestuff - tracestrip; + if ( dumpcount < 0 ) { + dumpcount += TRACEMAX; + } + if ( dumpcount > count ) { + dumpcount = count; + } + chunk = TRACEMAX - tracestrip; + if ( dumpcount > chunk ) { + rc = copy_to_user(pData, &tracebuf[tracestrip], + chunk * sizeof(tracebuf[0]) ); + pData += chunk * sizeof(tracebuf[0]); + tracestrip = 0; + chunk = dumpcount - chunk; + } else { + chunk = dumpcount; + } + rc = copy_to_user(pData, &tracebuf[tracestrip], + chunk * sizeof(tracebuf[0]) ); + tracestrip += chunk; + tracewrap = 0; + + rc = put_user(tracestrip, ++pIndex ); + rc = put_user(tracestuff, ++pIndex ); + + return dumpcount; +#else + return 0; +#endif +} + +/******************************************************************************/ +/* Function: ip2_ipl_write() */ +/* Parameters: */ +/* Pointer to file structure */ +/* Pointer to data */ +/* Number of bytes to write */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static ssize_t +ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off) +{ +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count ); +#endif + return 0; +} + +/******************************************************************************/ +/* Function: ip2_ipl_ioctl() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Command */ +/* Argument */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg ) +{ + unsigned int iplminor = iminor(pInode); + int rc = 0; + void __user *argp = (void __user *)arg; + ULONG __user *pIndex = argp; + i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4]; + i2ChanStrPtr pCh; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg ); +#endif + + switch ( iplminor ) { + case 0: // IPL device + rc = -EINVAL; + break; + case 1: // Status dump + case 5: + case 9: + case 13: + switch ( cmd ) { + case 64: /* Driver - ip2stat */ + rc = put_user(ip2_tty_driver->refcount, pIndex++ ); + rc = put_user(irq_counter, pIndex++ ); + rc = put_user(bh_counter, pIndex++ ); + break; + + case 65: /* Board - ip2stat */ + if ( pB ) { + rc = copy_to_user(argp, pB, sizeof(i2eBordStr)); + rc = put_user(INB(pB->i2eStatus), + (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) ); + } else { + rc = -ENODEV; + } + break; + + default: + if (cmd < IP2_MAX_PORTS) { + pCh = DevTable[cmd]; + if ( pCh ) + { + rc = copy_to_user(argp, pCh, sizeof(i2ChanStr)); + } else { + rc = -ENODEV; + } + } else { + rc = -EINVAL; + } + } + break; + + case 2: // Ping device + rc = -EINVAL; + break; + case 3: // Trace device + if ( cmd == 1 ) { + rc = put_user(iiSendPendingMail, pIndex++ ); + rc = put_user(i2InitChannels, pIndex++ ); + rc = put_user(i2QueueNeeds, pIndex++ ); + rc = put_user(i2QueueCommands, pIndex++ ); + rc = put_user(i2GetStatus, pIndex++ ); + rc = put_user(i2Input, pIndex++ ); + rc = put_user(i2InputFlush, pIndex++ ); + rc = put_user(i2Output, pIndex++ ); + rc = put_user(i2FlushOutput, pIndex++ ); + rc = put_user(i2DrainWakeup, pIndex++ ); + rc = put_user(i2DrainOutput, pIndex++ ); + rc = put_user(i2OutputFree, pIndex++ ); + rc = put_user(i2StripFifo, pIndex++ ); + rc = put_user(i2StuffFifoBypass, pIndex++ ); + rc = put_user(i2StuffFifoFlow, pIndex++ ); + rc = put_user(i2StuffFifoInline, pIndex++ ); + rc = put_user(i2ServiceBoard, pIndex++ ); + rc = put_user(serviceOutgoingFifo, pIndex++ ); + // rc = put_user(ip2_init, pIndex++ ); + rc = put_user(ip2_init_board, pIndex++ ); + rc = put_user(find_eisa_board, pIndex++ ); + rc = put_user(set_irq, pIndex++ ); + rc = put_user(ip2_interrupt, pIndex++ ); + rc = put_user(ip2_poll, pIndex++ ); + rc = put_user(service_all_boards, pIndex++ ); + rc = put_user(do_input, pIndex++ ); + rc = put_user(do_status, pIndex++ ); +#ifndef IP2DEBUG_OPEN + rc = put_user(0, pIndex++ ); +#else + rc = put_user(open_sanity_check, pIndex++ ); +#endif + rc = put_user(ip2_open, pIndex++ ); + rc = put_user(ip2_close, pIndex++ ); + rc = put_user(ip2_hangup, pIndex++ ); + rc = put_user(ip2_write, pIndex++ ); + rc = put_user(ip2_putchar, pIndex++ ); + rc = put_user(ip2_flush_chars, pIndex++ ); + rc = put_user(ip2_write_room, pIndex++ ); + rc = put_user(ip2_chars_in_buf, pIndex++ ); + rc = put_user(ip2_flush_buffer, pIndex++ ); + + //rc = put_user(ip2_wait_until_sent, pIndex++ ); + rc = put_user(0, pIndex++ ); + + rc = put_user(ip2_throttle, pIndex++ ); + rc = put_user(ip2_unthrottle, pIndex++ ); + rc = put_user(ip2_ioctl, pIndex++ ); + rc = put_user(0, pIndex++ ); + rc = put_user(get_serial_info, pIndex++ ); + rc = put_user(set_serial_info, pIndex++ ); + rc = put_user(ip2_set_termios, pIndex++ ); + rc = put_user(ip2_set_line_discipline, pIndex++ ); + rc = put_user(set_params, pIndex++ ); + } else { + rc = -EINVAL; + } + + break; + + default: + rc = -ENODEV; + break; + } + return rc; +} + +/******************************************************************************/ +/* Function: ip2_ipl_open() */ +/* Parameters: Pointer to device inode */ +/* Pointer to file structure */ +/* Returns: Success or failure */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +static int +ip2_ipl_open( struct inode *pInode, struct file *pFile ) +{ + unsigned int iplminor = iminor(pInode); + i2eBordStrPtr pB; + i2ChanStrPtr pCh; + +#ifdef IP2DEBUG_IPL + printk (KERN_DEBUG "IP2IPL: open\n" ); +#endif + + switch(iplminor) { + // These are the IPL devices + case 0: + case 4: + case 8: + case 12: + break; + + // These are the status devices + case 1: + case 5: + case 9: + case 13: + break; + + // These are the debug devices + case 2: + case 6: + case 10: + case 14: + pB = i2BoardPtrTable[iplminor / 4]; + pCh = (i2ChanStrPtr) pB->i2eChannelPtr; + break; + + // This is the trace device + case 3: + break; + } + return 0; +} +/******************************************************************************/ +/* Function: ip2_read_procmem */ +/* Parameters: */ +/* */ +/* Returns: Length of output */ +/* */ +/* Description: */ +/* Supplies some driver operating parameters */ +/* Not real useful unless your debugging the fifo */ +/* */ +/******************************************************************************/ + +#define LIMIT (PAGE_SIZE - 120) + +static int +ip2_read_procmem(char *buf, char **start, off_t offset, int len) +{ + i2eBordStrPtr pB; + i2ChanStrPtr pCh; + PTTY tty; + int i; + + len = 0; + +#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n" +#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n" +#define FMTLIN3 " 0x%04x 0x%04x rc flow\n" + + len += sprintf(buf+len,"\n"); + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + pB = i2BoardPtrTable[i]; + if ( pB ) { + len += sprintf(buf+len,"board %d:\n",i); + len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n", + pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting); + } + } + + len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n"); + for (i=0; i < IP2_MAX_PORTS; i++) { + if (len > LIMIT) + break; + pCh = DevTable[i]; + if (pCh) { + tty = pCh->pTTY; + if (tty && tty->count) { + len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags, + tty->termios->c_cflag,tty->termios->c_iflag); + + len += sprintf(buf+len,FMTLIN2, + pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds); + len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room); + } + } + } + return len; +} + +/* + * This is the handler for /proc/tty/driver/ip2 + * + * This stretch of code has been largely plagerized from at least three + * different sources including ip2mkdev.c and a couple of other drivers. + * The bugs are all mine. :-) =mhw= + */ +static int ip2_read_proc(char *page, char **start, off_t off, + int count, int *eof, void *data) +{ + int i, j, box; + int len = 0; + int boxes = 0; + int ports = 0; + int tports = 0; + off_t begin = 0; + i2eBordStrPtr pB; + + len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion ); + len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", + IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, + IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); + + for( i = 0; i < IP2_MAX_BOARDS; ++i ) { + /* This need to be reset for a board by board count... */ + boxes = 0; + pB = i2BoardPtrTable[i]; + if( pB ) { + switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) + { + case POR_ID_FIIEX: + len += sprintf( page+len, "Board %d: EX ports=", i ); + for( box = 0; box < ABS_MAX_BOXES; ++box ) + { + ports = 0; + + if( pB->i2eChannelMap[box] != 0 ) ++boxes; + for( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if( pB->i2eChannelMap[box] & 1<< j ) { + ++ports; + } + } + len += sprintf( page+len, "%d,", ports ); + tports += ports; + } + + --len; /* Backup over that last comma */ + + len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 ); + break; + + case POR_ID_II_4: + len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i ); + tports = ports = 4; + break; + + case POR_ID_II_8: + len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i ); + tports = ports = 8; + break; + + case POR_ID_II_8R: + len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i ); + tports = ports = 8; + break; + + default: + len += sprintf(page+len, "Board %d: unknown", i ); + /* Don't try and probe for minor numbers */ + tports = ports = 0; + } + + } else { + /* Don't try and probe for minor numbers */ + len += sprintf(page+len, "Board %d: vacant", i ); + tports = ports = 0; + } + + if( tports ) { + len += sprintf(page+len, " minors=" ); + + for ( box = 0; box < ABS_MAX_BOXES; ++box ) + { + for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) + { + if ( pB->i2eChannelMap[box] & (1 << j) ) + { + len += sprintf (page+len,"%d,", + j + ABS_BIGGEST_BOX * + (box+i*ABS_MAX_BOXES)); + } + } + } + + page[ len - 1 ] = '\n'; /* Overwrite that last comma */ + } else { + len += sprintf (page+len,"\n" ); + } + + if (len+begin > off+count) + break; + if (len+begin < off) { + begin += len; + len = 0; + } + } + + if (i >= IP2_MAX_BOARDS) + *eof = 1; + if (off >= len+begin) + return 0; + + *start = page + (off-begin); + return ((count < begin+len-off) ? count : begin+len-off); + } + +/******************************************************************************/ +/* Function: ip2trace() */ +/* Parameters: Value to add to trace buffer */ +/* Returns: Nothing */ +/* */ +/* Description: */ +/* */ +/* */ +/******************************************************************************/ +#ifdef IP2DEBUG_TRACE +void +ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...) +{ + long flags; + unsigned long *pCode = &codes; + union ip2breadcrumb bc; + i2ChanStrPtr pCh; + + + tracebuf[tracestuff++] = jiffies; + if ( tracestuff == TRACEMAX ) { + tracestuff = 0; + } + if ( tracestuff == tracestrip ) { + if ( ++tracestrip == TRACEMAX ) { + tracestrip = 0; + } + ++tracewrap; + } + + bc.hdr.port = 0xff & pn; + bc.hdr.cat = cat; + bc.hdr.codes = (unsigned char)( codes & 0xff ); + bc.hdr.label = label; + tracebuf[tracestuff++] = bc.value; + + for (;;) { + if ( tracestuff == TRACEMAX ) { + tracestuff = 0; + } + if ( tracestuff == tracestrip ) { + if ( ++tracestrip == TRACEMAX ) { + tracestrip = 0; + } + ++tracewrap; + } + + if ( !codes-- ) + break; + + tracebuf[tracestuff++] = *++pCode; + } +} +#endif + + +MODULE_LICENSE("GPL"); diff --git a/drivers/char/ip2main.c b/drivers/char/ip2main.c deleted file mode 100644 index 56e93a5..0000000 --- a/drivers/char/ip2main.c +++ /dev/null @@ -1,3260 +0,0 @@ -/* -* -* (c) 1999 by Computone Corporation -* -******************************************************************************** -* -* PACKAGE: Linux tty Device Driver for IntelliPort family of multiport -* serial I/O controllers. -* -* DESCRIPTION: Mainline code for the device driver -* -*******************************************************************************/ -// ToDo: -// -// Fix the immediate DSS_NOW problem. -// Work over the channel stats return logic in ip2_ipl_ioctl so they -// make sense for all 256 possible channels and so the user space -// utilities will compile and work properly. -// -// Done: -// -// 1.2.14 /\/\|=mhw=|\/\/ -// Added bounds checking to ip2_ipl_ioctl to avoid potential terroristic acts. -// Changed the definition of ip2trace to be more consistent with kernel style -// Thanks to Andreas Dilger for these updates -// -// 1.2.13 /\/\|=mhw=|\/\/ -// DEVFS: Renamed ttf/{n} to tts/F{n} and cuf/{n} to cua/F{n} to conform -// to agreed devfs serial device naming convention. -// -// 1.2.12 /\/\|=mhw=|\/\/ -// Cleaned up some remove queue cut and paste errors -// -// 1.2.11 /\/\|=mhw=|\/\/ -// Clean up potential NULL pointer dereferences -// Clean up devfs registration -// Add kernel command line parsing for io and irq -// Compile defaults for io and irq are now set in ip2.c not ip2/ip2.h! -// Reworked poll_only hack for explicit parameter setting -// You must now EXPLICITLY set poll_only = 1 or set all irqs to 0 -// Merged ip2_loadmain and old_ip2_init -// Converted all instances of interruptible_sleep_on into queue calls -// Most of these had no race conditions but better to clean up now -// -// 1.2.10 /\/\|=mhw=|\/\/ -// Fixed the bottom half interrupt handler and enabled USE_IQI -// to split the interrupt handler into a formal top-half / bottom-half -// Fixed timing window on high speed processors that queued messages to -// the outbound mail fifo faster than the board could handle. -// -// 1.2.9 -// Four box EX was barfing on >128k kmalloc, made structure smaller by -// reducing output buffer size -// -// 1.2.8 -// Device file system support (MHW) -// -// 1.2.7 -// Fixed -// Reload of ip2 without unloading ip2main hangs system on cat of /proc/modules -// -// 1.2.6 -//Fixes DCD problems -// DCD was not reported when CLOCAL was set on call to TIOCMGET -// -//Enhancements: -// TIOCMGET requests and waits for status return -// No DSS interrupts enabled except for DCD when needed -// -// For internal use only -// -//#define IP2DEBUG_INIT -//#define IP2DEBUG_OPEN -//#define IP2DEBUG_WRITE -//#define IP2DEBUG_READ -//#define IP2DEBUG_IOCTL -//#define IP2DEBUG_IPL - -//#define IP2DEBUG_TRACE -//#define DEBUG_FIFO - -/************/ -/* Includes */ -/************/ -#include - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include - -#include -#include - -#include - -#include "./ip2/ip2types.h" -#include "./ip2/ip2trace.h" -#include "./ip2/ip2ioctl.h" -#include "./ip2/ip2.h" -#include "./ip2/i2ellis.h" -#include "./ip2/i2lib.h" - -/***************** - * /proc/ip2mem * - *****************/ - -#include - -static int ip2_read_procmem(char *, char **, off_t, int); -static int ip2_read_proc(char *, char **, off_t, int, int *, void * ); - -/********************/ -/* Type Definitions */ -/********************/ - -/*************/ -/* Constants */ -/*************/ - -/* String constants to identify ourselves */ -static char *pcName = "Computone IntelliPort Plus multiport driver"; -static char *pcVersion = "1.2.14"; - -/* String constants for port names */ -static char *pcDriver_name = "ip2"; -static char *pcIpl = "ip2ipl"; - -/* Serial subtype definitions */ -#define SERIAL_TYPE_NORMAL 1 - -// cheezy kludge or genius - you decide? -int ip2_loadmain(int *, int *, unsigned char *, int); -static unsigned char *Fip_firmware; -static int Fip_firmware_size; - -/***********************/ -/* Function Prototypes */ -/***********************/ - -/* Global module entry functions */ - -/* Private (static) functions */ -static int ip2_open(PTTY, struct file *); -static void ip2_close(PTTY, struct file *); -static int ip2_write(PTTY, const unsigned char *, int); -static void ip2_putchar(PTTY, unsigned char); -static void ip2_flush_chars(PTTY); -static int ip2_write_room(PTTY); -static int ip2_chars_in_buf(PTTY); -static void ip2_flush_buffer(PTTY); -static int ip2_ioctl(PTTY, struct file *, UINT, ULONG); -static void ip2_set_termios(PTTY, struct termios *); -static void ip2_set_line_discipline(PTTY); -static void ip2_throttle(PTTY); -static void ip2_unthrottle(PTTY); -static void ip2_stop(PTTY); -static void ip2_start(PTTY); -static void ip2_hangup(PTTY); -static int ip2_tiocmget(struct tty_struct *tty, struct file *file); -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear); - -static void set_irq(int, int); -static void ip2_interrupt_bh(i2eBordStrPtr pB); -static irqreturn_t ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs); -static void ip2_poll(unsigned long arg); -static inline void service_all_boards(void); -static void do_input(void *p); -static void do_status(void *p); - -static void ip2_wait_until_sent(PTTY,int); - -static void set_params (i2ChanStrPtr, struct termios *); -static int get_serial_info(i2ChanStrPtr, struct serial_struct __user *); -static int set_serial_info(i2ChanStrPtr, struct serial_struct __user *); - -static ssize_t ip2_ipl_read(struct file *, char __user *, size_t, loff_t *); -static ssize_t ip2_ipl_write(struct file *, const char __user *, size_t, loff_t *); -static int ip2_ipl_ioctl(struct inode *, struct file *, UINT, ULONG); -static int ip2_ipl_open(struct inode *, struct file *); - -static int DumpTraceBuffer(char __user *, int); -static int DumpFifoBuffer( char __user *, int); - -static void ip2_init_board(int); -static unsigned short find_eisa_board(int); - -/***************/ -/* Static Data */ -/***************/ - -static struct tty_driver *ip2_tty_driver; - -/* Here, then is a table of board pointers which the interrupt routine should - * scan through to determine who it must service. - */ -static unsigned short i2nBoards; // Number of boards here - -static i2eBordStrPtr i2BoardPtrTable[IP2_MAX_BOARDS]; - -static i2ChanStrPtr DevTable[IP2_MAX_PORTS]; -//DevTableMem just used to save addresses for kfree -static void *DevTableMem[IP2_MAX_BOARDS]; - -/* This is the driver descriptor for the ip2ipl device, which is used to - * download the loadware to the boards. - */ -static struct file_operations ip2_ipl = { - .owner = THIS_MODULE, - .read = ip2_ipl_read, - .write = ip2_ipl_write, - .ioctl = ip2_ipl_ioctl, - .open = ip2_ipl_open, -}; - -static unsigned long irq_counter = 0; -static unsigned long bh_counter = 0; - -// Use immediate queue to service interrupts -#define USE_IQI -//#define USE_IQ // PCI&2.2 needs work - -/* The timer_list entry for our poll routine. If interrupt operation is not - * selected, the board is serviced periodically to see if anything needs doing. - */ -#define POLL_TIMEOUT (jiffies + 1) -static DEFINE_TIMER(PollTimer, ip2_poll, 0, 0); -static char TimerOn; - -#ifdef IP2DEBUG_TRACE -/* Trace (debug) buffer data */ -#define TRACEMAX 1000 -static unsigned long tracebuf[TRACEMAX]; -static int tracestuff; -static int tracestrip; -static int tracewrap; -#endif - -/**********/ -/* Macros */ -/**********/ - -#if defined(MODULE) && defined(IP2DEBUG_OPEN) -#define DBG_CNT(s) printk(KERN_DEBUG "(%s): [%x] refc=%d, ttyc=%d, modc=%x -> %s\n", \ - tty->name,(pCh->flags),ip2_tty_driver->refcount, \ - tty->count,/*GET_USE_COUNT(module)*/0,s) -#else -#define DBG_CNT(s) -#endif - -/********/ -/* Code */ -/********/ - -#include "./ip2/i2ellis.c" /* Extremely low-level interface services */ -#include "./ip2/i2cmd.c" /* Standard loadware command definitions */ -#include "./ip2/i2lib.c" /* High level interface services */ - -/* Configuration area for modprobe */ - -MODULE_AUTHOR("Doug McNash"); -MODULE_DESCRIPTION("Computone IntelliPort Plus Driver"); - -static int poll_only = 0; - -static int Eisa_irq; -static int Eisa_slot; - -static int iindx; -static char rirqs[IP2_MAX_BOARDS]; -static int Valid_Irqs[] = { 3, 4, 5, 7, 10, 11, 12, 15, 0}; - -/* for sysfs class support */ -static struct class *ip2_class; - -// Some functions to keep track of what irq's we have - -static int __init -is_valid_irq(int irq) -{ - int *i = Valid_Irqs; - - while ((*i != 0) && (*i != irq)) { - i++; - } - return (*i); -} - -static void __init -mark_requested_irq( char irq ) -{ - rirqs[iindx++] = irq; -} - -#ifdef MODULE -static int __init -clear_requested_irq( char irq ) -{ - int i; - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if (rirqs[i] == irq) { - rirqs[i] = 0; - return 1; - } - } - return 0; -} -#endif - -static int __init -have_requested_irq( char irq ) -{ - // array init to zeros so 0 irq will not be requested as a side effect - int i; - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if (rirqs[i] == irq) - return 1; - } - return 0; -} - -/******************************************************************************/ -/* Function: init_module() */ -/* Parameters: None */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This is a required entry point for an installable module. It simply calls */ -/* the driver initialisation function and returns what it returns. */ -/******************************************************************************/ -#ifdef MODULE -int -init_module(void) -{ -#ifdef IP2DEBUG_INIT - printk (KERN_DEBUG "Loading module ...\n" ); -#endif - return 0; -} -#endif /* MODULE */ - -/******************************************************************************/ -/* Function: cleanup_module() */ -/* Parameters: None */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This is a required entry point for an installable module. It has to return */ -/* the device and the driver to a passive state. It should not be necessary */ -/* to reset the board fully, especially as the loadware is downloaded */ -/* externally rather than in the driver. We just want to disable the board */ -/* and clear the loadware to a reset state. To allow this there has to be a */ -/* way to detect whether the board has the loadware running at init time to */ -/* handle subsequent installations of the driver. All memory allocated by the */ -/* driver should be returned since it may be unloaded from memory. */ -/******************************************************************************/ -#ifdef MODULE -void -cleanup_module(void) -{ - int err; - int i; - -#ifdef IP2DEBUG_INIT - printk (KERN_DEBUG "Unloading %s: version %s\n", pcName, pcVersion ); -#endif - /* Stop poll timer if we had one. */ - if ( TimerOn ) { - del_timer ( &PollTimer ); - TimerOn = 0; - } - - /* Reset the boards we have. */ - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if ( i2BoardPtrTable[i] ) { - iiReset( i2BoardPtrTable[i] ); - } - } - - /* The following is done at most once, if any boards were installed. */ - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if ( i2BoardPtrTable[i] ) { - iiResetDelay( i2BoardPtrTable[i] ); - /* free io addresses and Tibet */ - release_region( ip2config.addr[i], 8 ); - class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i)); - devfs_remove("ip2/ipl%d", i); - class_device_destroy(ip2_class, MKDEV(IP2_IPL_MAJOR, 4 * i + 1)); - devfs_remove("ip2/stat%d", i); - } - /* Disable and remove interrupt handler. */ - if ( (ip2config.irq[i] > 0) && have_requested_irq(ip2config.irq[i]) ) { - free_irq ( ip2config.irq[i], (void *)&pcName); - clear_requested_irq( ip2config.irq[i]); - } - } - class_destroy(ip2_class); - devfs_remove("ip2"); - if ( ( err = tty_unregister_driver ( ip2_tty_driver ) ) ) { - printk(KERN_ERR "IP2: failed to unregister tty driver (%d)\n", err); - } - put_tty_driver(ip2_tty_driver); - if ( ( err = unregister_chrdev ( IP2_IPL_MAJOR, pcIpl ) ) ) { - printk(KERN_ERR "IP2: failed to unregister IPL driver (%d)\n", err); - } - remove_proc_entry("ip2mem", &proc_root); - - // free memory - for (i = 0; i < IP2_MAX_BOARDS; i++) { - void *pB; -#ifdef CONFIG_PCI - if (ip2config.type[i] == PCI && ip2config.pci_dev[i]) { - pci_disable_device(ip2config.pci_dev[i]); - ip2config.pci_dev[i] = NULL; - } -#endif - if ((pB = i2BoardPtrTable[i]) != 0 ) { - kfree ( pB ); - i2BoardPtrTable[i] = NULL; - } - if ((DevTableMem[i]) != NULL ) { - kfree ( DevTableMem[i] ); - DevTableMem[i] = NULL; - } - } - - /* Cleanup the iiEllis subsystem. */ - iiEllisCleanup(); -#ifdef IP2DEBUG_INIT - printk (KERN_DEBUG "IP2 Unloaded\n" ); -#endif -} -#endif /* MODULE */ - -static struct tty_operations ip2_ops = { - .open = ip2_open, - .close = ip2_close, - .write = ip2_write, - .put_char = ip2_putchar, - .flush_chars = ip2_flush_chars, - .write_room = ip2_write_room, - .chars_in_buffer = ip2_chars_in_buf, - .flush_buffer = ip2_flush_buffer, - .ioctl = ip2_ioctl, - .throttle = ip2_throttle, - .unthrottle = ip2_unthrottle, - .set_termios = ip2_set_termios, - .set_ldisc = ip2_set_line_discipline, - .stop = ip2_stop, - .start = ip2_start, - .hangup = ip2_hangup, - .read_proc = ip2_read_proc, - .tiocmget = ip2_tiocmget, - .tiocmset = ip2_tiocmset, -}; - -/******************************************************************************/ -/* Function: ip2_loadmain() */ -/* Parameters: irq, io from command line of insmod et. al. */ -/* pointer to fip firmware and firmware size for boards */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This was the required entry point for all drivers (now in ip2.c) */ -/* It performs all */ -/* initialisation of the devices and driver structures, and registers itself */ -/* with the relevant kernel modules. */ -/******************************************************************************/ -/* SA_INTERRUPT- if set blocks all interrupts else only this line */ -/* SA_SHIRQ - for shared irq PCI or maybe EISA only */ -/* SA_RANDOM - can be source for cert. random number generators */ -#define IP2_SA_FLAGS 0 - -int -ip2_loadmain(int *iop, int *irqp, unsigned char *firmware, int firmsize) -{ - int i, j, box; - int err = 0; - int status = 0; - static int loaded; - i2eBordStrPtr pB = NULL; - int rc = -1; - - ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_ENTER, 0 ); - - /* process command line arguments to modprobe or - insmod i.e. iop & irqp */ - /* irqp and iop should ALWAYS be specified now... But we check - them individually just to be sure, anyways... */ - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if (iop) { - ip2config.addr[i] = iop[i]; - if (irqp) { - if( irqp[i] >= 0 ) { - ip2config.irq[i] = irqp[i]; - } else { - ip2config.irq[i] = 0; - } - // This is a little bit of a hack. If poll_only=1 on command - // line back in ip2.c OR all IRQs on all specified boards are - // explicitly set to 0, then drop to poll only mode and override - // PCI or EISA interrupts. This superceeds the old hack of - // triggering if all interrupts were zero (like da default). - // Still a hack but less prone to random acts of terrorism. - // - // What we really should do, now that the IRQ default is set - // to -1, is to use 0 as a hard coded, do not probe. - // - // /\/\|=mhw=|\/\/ - poll_only |= irqp[i]; - } - } - } - poll_only = !poll_only; - - Fip_firmware = firmware; - Fip_firmware_size = firmsize; - - /* Announce our presence */ - printk( KERN_INFO "%s version %s\n", pcName, pcVersion ); - - // ip2 can be unloaded and reloaded for no good reason - // we can't let that happen here or bad things happen - // second load hoses board but not system - fixme later - if (loaded) { - printk( KERN_INFO "Still loaded\n" ); - return 0; - } - loaded++; - - ip2_tty_driver = alloc_tty_driver(IP2_MAX_PORTS); - if (!ip2_tty_driver) - return -ENOMEM; - - /* Initialise the iiEllis subsystem. */ - iiEllisInit(); - - /* Initialize arrays. */ - memset( i2BoardPtrTable, 0, sizeof i2BoardPtrTable ); - memset( DevTable, 0, sizeof DevTable ); - - /* Initialise all the boards we can find (up to the maximum). */ - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - switch ( ip2config.addr[i] ) { - case 0: /* skip this slot even if card is present */ - break; - default: /* ISA */ - /* ISA address must be specified */ - if ( (ip2config.addr[i] < 0x100) || (ip2config.addr[i] > 0x3f8) ) { - printk ( KERN_ERR "IP2: Bad ISA board %d address %x\n", - i, ip2config.addr[i] ); - ip2config.addr[i] = 0; - } else { - ip2config.type[i] = ISA; - - /* Check for valid irq argument, set for polling if invalid */ - if (ip2config.irq[i] && !is_valid_irq(ip2config.irq[i])) { - printk(KERN_ERR "IP2: Bad IRQ(%d) specified\n",ip2config.irq[i]); - ip2config.irq[i] = 0;// 0 is polling and is valid in that sense - } - } - break; - case PCI: -#ifdef CONFIG_PCI - { - struct pci_dev *pci_dev_i = NULL; - pci_dev_i = pci_find_device(PCI_VENDOR_ID_COMPUTONE, - PCI_DEVICE_ID_COMPUTONE_IP2EX, pci_dev_i); - if (pci_dev_i != NULL) { - unsigned int addr; - - if (pci_enable_device(pci_dev_i)) { - printk( KERN_ERR "IP2: can't enable PCI device at %s\n", - pci_name(pci_dev_i)); - break; - } - ip2config.type[i] = PCI; - ip2config.pci_dev[i] = pci_dev_i; - status = - pci_read_config_dword(pci_dev_i, PCI_BASE_ADDRESS_1, &addr); - if ( addr & 1 ) { - ip2config.addr[i]=(USHORT)(addr&0xfffe); - } else { - printk( KERN_ERR "IP2: PCI I/O address error\n"); - } - -// If the PCI BIOS assigned it, lets try and use it. If we -// can't acquire it or it screws up, deal with it then. - -// if (!is_valid_irq(pci_irq)) { -// printk( KERN_ERR "IP2: Bad PCI BIOS IRQ(%d)\n",pci_irq); -// pci_irq = 0; -// } - ip2config.irq[i] = pci_dev_i->irq; - } else { // ann error - ip2config.addr[i] = 0; - if (status == PCIBIOS_DEVICE_NOT_FOUND) { - printk( KERN_ERR "IP2: PCI board %d not found\n", i ); - } else { - printk( KERN_ERR "IP2: PCI error 0x%x \n", status ); - } - } - } -#else - printk( KERN_ERR "IP2: PCI card specified but PCI support not\n"); - printk( KERN_ERR "IP2: configured in this kernel.\n"); - printk( KERN_ERR "IP2: Recompile kernel with CONFIG_PCI defined!\n"); -#endif /* CONFIG_PCI */ - break; - case EISA: - if ( (ip2config.addr[i] = find_eisa_board( Eisa_slot + 1 )) != 0) { - /* Eisa_irq set as side effect, boo */ - ip2config.type[i] = EISA; - } - ip2config.irq[i] = Eisa_irq; - break; - } /* switch */ - } /* for */ - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if ( ip2config.addr[i] ) { - pB = kmalloc( sizeof(i2eBordStr), GFP_KERNEL); - if ( pB != NULL ) { - i2BoardPtrTable[i] = pB; - memset( pB, 0, sizeof(i2eBordStr) ); - iiSetAddress( pB, ip2config.addr[i], ii2DelayTimer ); - iiReset( pB ); - } else { - printk(KERN_ERR "IP2: board memory allocation error\n"); - } - } - } - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if ( ( pB = i2BoardPtrTable[i] ) != NULL ) { - iiResetDelay( pB ); - break; - } - } - for ( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if ( i2BoardPtrTable[i] != NULL ) { - ip2_init_board( i ); - } - } - - ip2trace (ITRC_NO_PORT, ITRC_INIT, 2, 0 ); - - ip2_tty_driver->owner = THIS_MODULE; - ip2_tty_driver->name = "ttyF"; - ip2_tty_driver->devfs_name = "tts/F"; - ip2_tty_driver->driver_name = pcDriver_name; - ip2_tty_driver->major = IP2_TTY_MAJOR; - ip2_tty_driver->minor_start = 0; - ip2_tty_driver->type = TTY_DRIVER_TYPE_SERIAL; - ip2_tty_driver->subtype = SERIAL_TYPE_NORMAL; - ip2_tty_driver->init_termios = tty_std_termios; - ip2_tty_driver->init_termios.c_cflag = B9600|CS8|CREAD|HUPCL|CLOCAL; - ip2_tty_driver->flags = TTY_DRIVER_REAL_RAW | TTY_DRIVER_NO_DEVFS; - tty_set_operations(ip2_tty_driver, &ip2_ops); - - ip2trace (ITRC_NO_PORT, ITRC_INIT, 3, 0 ); - - /* Register the tty devices. */ - if ( ( err = tty_register_driver ( ip2_tty_driver ) ) ) { - printk(KERN_ERR "IP2: failed to register tty driver (%d)\n", err); - put_tty_driver(ip2_tty_driver); - return -EINVAL; - } else - /* Register the IPL driver. */ - if ( ( err = register_chrdev ( IP2_IPL_MAJOR, pcIpl, &ip2_ipl ) ) ) { - printk(KERN_ERR "IP2: failed to register IPL device (%d)\n", err ); - } else { - /* create the sysfs class */ - ip2_class = class_create(THIS_MODULE, "ip2"); - if (IS_ERR(ip2_class)) { - err = PTR_ERR(ip2_class); - goto out_chrdev; - } - } - /* Register the read_procmem thing */ - if (!create_proc_info_entry("ip2mem",0,&proc_root,ip2_read_procmem)) { - printk(KERN_ERR "IP2: failed to register read_procmem\n"); - } else { - - ip2trace (ITRC_NO_PORT, ITRC_INIT, 4, 0 ); - /* Register the interrupt handler or poll handler, depending upon the - * specified interrupt. - */ - - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if ( 0 == ip2config.addr[i] ) { - continue; - } - - if ( NULL != ( pB = i2BoardPtrTable[i] ) ) { - class_device_create(ip2_class, NULL, - MKDEV(IP2_IPL_MAJOR, 4 * i), - NULL, "ipl%d", i); - err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i), - S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, - "ip2/ipl%d", i); - if (err) { - class_device_destroy(ip2_class, - MKDEV(IP2_IPL_MAJOR, 4 * i)); - goto out_class; - } - - class_device_create(ip2_class, NULL, - MKDEV(IP2_IPL_MAJOR, 4 * i + 1), - NULL, "stat%d", i); - err = devfs_mk_cdev(MKDEV(IP2_IPL_MAJOR, 4 * i + 1), - S_IRUSR | S_IWUSR | S_IRGRP | S_IFCHR, - "ip2/stat%d", i); - if (err) { - class_device_destroy(ip2_class, - MKDEV(IP2_IPL_MAJOR, 4 * i + 1)); - goto out_class; - } - - for ( box = 0; box < ABS_MAX_BOXES; ++box ) - { - for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) - { - if ( pB->i2eChannelMap[box] & (1 << j) ) - { - tty_register_device(ip2_tty_driver, - j + ABS_BIGGEST_BOX * - (box+i*ABS_MAX_BOXES), NULL); - } - } - } - } - - if (poll_only) { -// Poll only forces driver to only use polling and -// to ignore the probed PCI or EISA interrupts. - ip2config.irq[i] = CIR_POLL; - } - if ( ip2config.irq[i] == CIR_POLL ) { -retry: - if (!TimerOn) { - PollTimer.expires = POLL_TIMEOUT; - add_timer ( &PollTimer ); - TimerOn = 1; - printk( KERN_INFO "IP2: polling\n"); - } - } else { - if (have_requested_irq(ip2config.irq[i])) - continue; - rc = request_irq( ip2config.irq[i], ip2_interrupt, - IP2_SA_FLAGS | (ip2config.type[i] == PCI ? SA_SHIRQ : 0), - pcName, (void *)&pcName); - if (rc) { - printk(KERN_ERR "IP2: an request_irq failed: error %d\n",rc); - ip2config.irq[i] = CIR_POLL; - printk( KERN_INFO "IP2: Polling %ld/sec.\n", - (POLL_TIMEOUT - jiffies)); - goto retry; - } - mark_requested_irq(ip2config.irq[i]); - /* Initialise the interrupt handler bottom half (aka slih). */ - } - } - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - if ( i2BoardPtrTable[i] ) { - set_irq( i, ip2config.irq[i] ); /* set and enable board interrupt */ - } - } - } - ip2trace (ITRC_NO_PORT, ITRC_INIT, ITRC_RETURN, 0 ); - goto out; - -out_class: - class_destroy(ip2_class); -out_chrdev: - unregister_chrdev(IP2_IPL_MAJOR, "ip2"); -out: - return err; -} - -EXPORT_SYMBOL(ip2_loadmain); - -/******************************************************************************/ -/* Function: ip2_init_board() */ -/* Parameters: Index of board in configuration structure */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This function initializes the specified board. The loadware is copied to */ -/* the board, the channel structures are initialized, and the board details */ -/* are reported on the console. */ -/******************************************************************************/ -static void __init -ip2_init_board( int boardnum ) -{ - int i; - int nports = 0, nboxes = 0; - i2ChanStrPtr pCh; - i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; - - if ( !iiInitialize ( pB ) ) { - printk ( KERN_ERR "IP2: Failed to initialize board at 0x%x, error %d\n", - pB->i2eBase, pB->i2eError ); - goto err_initialize; - } - printk(KERN_INFO "IP2: Board %d: addr=0x%x irq=%d\n", boardnum + 1, - ip2config.addr[boardnum], ip2config.irq[boardnum] ); - - if (!request_region( ip2config.addr[boardnum], 8, pcName )) { - printk(KERN_ERR "IP2: bad addr=0x%x\n", ip2config.addr[boardnum]); - goto err_initialize; - } - - if ( iiDownloadAll ( pB, (loadHdrStrPtr)Fip_firmware, 1, Fip_firmware_size ) - != II_DOWN_GOOD ) { - printk ( KERN_ERR "IP2: failed to download loadware\n" ); - goto err_release_region; - } else { - printk ( KERN_INFO "IP2: fv=%d.%d.%d lv=%d.%d.%d\n", - pB->i2ePom.e.porVersion, - pB->i2ePom.e.porRevision, - pB->i2ePom.e.porSubRev, pB->i2eLVersion, - pB->i2eLRevision, pB->i2eLSub ); - } - - switch ( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) { - - default: - printk( KERN_ERR "IP2: Unknown board type, ID = %x\n", - pB->i2ePom.e.porID ); - nports = 0; - goto err_release_region; - break; - - case POR_ID_II_4: /* IntelliPort-II, ISA-4 (4xRJ45) */ - printk ( KERN_INFO "IP2: ISA-4\n" ); - nports = 4; - break; - - case POR_ID_II_8: /* IntelliPort-II, 8-port using standard brick. */ - printk ( KERN_INFO "IP2: ISA-8 std\n" ); - nports = 8; - break; - - case POR_ID_II_8R: /* IntelliPort-II, 8-port using RJ11's (no CTS) */ - printk ( KERN_INFO "IP2: ISA-8 RJ11\n" ); - nports = 8; - break; - - case POR_ID_FIIEX: /* IntelliPort IIEX */ - { - int portnum = IP2_PORTS_PER_BOARD * boardnum; - int box; - - for( box = 0; box < ABS_MAX_BOXES; ++box ) { - if ( pB->i2eChannelMap[box] != 0 ) { - ++nboxes; - } - for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { - if ( pB->i2eChannelMap[box] & 1<< i ) { - ++nports; - } - } - } - DevTableMem[boardnum] = pCh = - kmalloc( sizeof(i2ChanStr) * nports, GFP_KERNEL ); - if ( !pCh ) { - printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); - goto err_release_region; - } - if ( !i2InitChannels( pB, nports, pCh ) ) { - printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); - kfree ( pCh ); - goto err_release_region; - } - pB->i2eChannelPtr = &DevTable[portnum]; - pB->i2eChannelCnt = ABS_MOST_PORTS; - - for( box = 0; box < ABS_MAX_BOXES; ++box, portnum += ABS_BIGGEST_BOX ) { - for( i = 0; i < ABS_BIGGEST_BOX; ++i ) { - if ( pB->i2eChannelMap[box] & (1 << i) ) { - DevTable[portnum + i] = pCh; - pCh->port_index = portnum + i; - pCh++; - } - } - } - printk(KERN_INFO "IP2: EX box=%d ports=%d %d bit\n", - nboxes, nports, pB->i2eDataWidth16 ? 16 : 8 ); - } - goto ex_exit; - } - DevTableMem[boardnum] = pCh = - kmalloc ( sizeof (i2ChanStr) * nports, GFP_KERNEL ); - if ( !pCh ) { - printk ( KERN_ERR "IP2: (i2_init_channel:) Out of memory.\n"); - goto err_release_region; - } - pB->i2eChannelPtr = pCh; - pB->i2eChannelCnt = nports; - if ( !i2InitChannels( pB, nports, pCh ) ) { - printk(KERN_ERR "IP2: i2InitChannels failed: %d\n",pB->i2eError); - kfree ( pCh ); - goto err_release_region; - } - pB->i2eChannelPtr = &DevTable[IP2_PORTS_PER_BOARD * boardnum]; - - for( i = 0; i < pB->i2eChannelCnt; ++i ) { - DevTable[IP2_PORTS_PER_BOARD * boardnum + i] = pCh; - pCh->port_index = (IP2_PORTS_PER_BOARD * boardnum) + i; - pCh++; - } -ex_exit: - INIT_WORK(&pB->tqueue_interrupt, (void(*)(void*)) ip2_interrupt_bh, pB); - return; - -err_release_region: - release_region(ip2config.addr[boardnum], 8); -err_initialize: - kfree ( pB ); - i2BoardPtrTable[boardnum] = NULL; - return; -} - -/******************************************************************************/ -/* Function: find_eisa_board ( int start_slot ) */ -/* Parameters: First slot to check */ -/* Returns: Address of EISA IntelliPort II controller */ -/* */ -/* Description: */ -/* This function searches for an EISA IntelliPort controller, starting */ -/* from the specified slot number. If the motherboard is not identified as an */ -/* EISA motherboard, or no valid board ID is selected it returns 0. Otherwise */ -/* it returns the base address of the controller. */ -/******************************************************************************/ -static unsigned short __init -find_eisa_board( int start_slot ) -{ - int i, j; - unsigned int idm = 0; - unsigned int idp = 0; - unsigned int base = 0; - unsigned int value; - int setup_address; - int setup_irq; - int ismine = 0; - - /* - * First a check for an EISA motherboard, which we do by comparing the - * EISA ID registers for the system board and the first couple of slots. - * No slot ID should match the system board ID, but on an ISA or PCI - * machine the odds are that an empty bus will return similar values for - * each slot. - */ - i = 0x0c80; - value = (inb(i) << 24) + (inb(i+1) << 16) + (inb(i+2) << 8) + inb(i+3); - for( i = 0x1c80; i <= 0x4c80; i += 0x1000 ) { - j = (inb(i)<<24)+(inb(i+1)<<16)+(inb(i+2)<<8)+inb(i+3); - if ( value == j ) - return 0; - } - - /* - * OK, so we are inclined to believe that this is an EISA machine. Find - * an IntelliPort controller. - */ - for( i = start_slot; i < 16; i++ ) { - base = i << 12; - idm = (inb(base + 0xc80) << 8) | (inb(base + 0xc81) & 0xff); - idp = (inb(base + 0xc82) << 8) | (inb(base + 0xc83) & 0xff); - ismine = 0; - if ( idm == 0x0e8e ) { - if ( idp == 0x0281 || idp == 0x0218 ) { - ismine = 1; - } else if ( idp == 0x0282 || idp == 0x0283 ) { - ismine = 3; /* Can do edge-trigger */ - } - if ( ismine ) { - Eisa_slot = i; - break; - } - } - } - if ( !ismine ) - return 0; - - /* It's some sort of EISA card, but at what address is it configured? */ - - setup_address = base + 0xc88; - value = inb(base + 0xc86); - setup_irq = (value & 8) ? Valid_Irqs[value & 7] : 0; - - if ( (ismine & 2) && !(value & 0x10) ) { - ismine = 1; /* Could be edging, but not */ - } - - if ( Eisa_irq == 0 ) { - Eisa_irq = setup_irq; - } else if ( Eisa_irq != setup_irq ) { - printk ( KERN_ERR "IP2: EISA irq mismatch between EISA controllers\n" ); - } - -#ifdef IP2DEBUG_INIT -printk(KERN_DEBUG "Computone EISA board in slot %d, I.D. 0x%x%x, Address 0x%x", - base >> 12, idm, idp, setup_address); - if ( Eisa_irq ) { - printk(KERN_DEBUG ", Interrupt %d %s\n", - setup_irq, (ismine & 2) ? "(edge)" : "(level)"); - } else { - printk(KERN_DEBUG ", (polled)\n"); - } -#endif - return setup_address; -} - -/******************************************************************************/ -/* Function: set_irq() */ -/* Parameters: index to board in board table */ -/* IRQ to use */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/******************************************************************************/ -static void -set_irq( int boardnum, int boardIrq ) -{ - unsigned char tempCommand[16]; - i2eBordStrPtr pB = i2BoardPtrTable[boardnum]; - unsigned long flags; - - /* - * Notify the boards they may generate interrupts. This is done by - * sending an in-line command to channel 0 on each board. This is why - * the channels have to be defined already. For each board, if the - * interrupt has never been defined, we must do so NOW, directly, since - * board will not send flow control or even give an interrupt until this - * is done. If polling we must send 0 as the interrupt parameter. - */ - - // We will get an interrupt here at the end of this function - - iiDisableMailIrq(pB); - - /* We build up the entire packet header. */ - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_INLINE; - CMD_COUNT_OF(tempCommand) = 2; - (CMD_OF(tempCommand))[0] = CMDVALUE_IRQ; - (CMD_OF(tempCommand))[1] = boardIrq; - /* - * Write to FIFO; don't bother to adjust fifo capacity for this, since - * board will respond almost immediately after SendMail hit. - */ - WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); - iiWriteBuf(pB, tempCommand, 4); - WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); - pB->i2eUsingIrq = boardIrq; - pB->i2eOutMailWaiting |= MB_OUT_STUFFED; - - /* Need to update number of boards before you enable mailbox int */ - ++i2nBoards; - - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 6; - (CMD_OF(tempCommand))[0] = 88; // SILO - (CMD_OF(tempCommand))[1] = 64; // chars - (CMD_OF(tempCommand))[2] = 32; // ms - - (CMD_OF(tempCommand))[3] = 28; // MAX_BLOCK - (CMD_OF(tempCommand))[4] = 64; // chars - - (CMD_OF(tempCommand))[5] = 87; // HW_TEST - WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); - iiWriteBuf(pB, tempCommand, 8); - WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); - - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 1; - (CMD_OF(tempCommand))[0] = 84; /* get BOX_IDS */ - iiWriteBuf(pB, tempCommand, 3); - -#ifdef XXX - // enable heartbeat for test porpoises - CHANNEL_OF(tempCommand) = 0; - PTYPE_OF(tempCommand) = PTYPE_BYPASS; - CMD_COUNT_OF(tempCommand) = 2; - (CMD_OF(tempCommand))[0] = 44; /* get ping */ - (CMD_OF(tempCommand))[1] = 200; /* 200 ms */ - WRITE_LOCK_IRQSAVE(&pB->write_fifo_spinlock,flags); - iiWriteBuf(pB, tempCommand, 4); - WRITE_UNLOCK_IRQRESTORE(&pB->write_fifo_spinlock,flags); -#endif - - iiEnableMailIrq(pB); - iiSendPendingMail(pB); -} - -/******************************************************************************/ -/* Interrupt Handler Section */ -/******************************************************************************/ - -static inline void -service_all_boards(void) -{ - int i; - i2eBordStrPtr pB; - - /* Service every board on the list */ - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - pB = i2BoardPtrTable[i]; - if ( pB ) { - i2ServiceBoard( pB ); - } - } -} - - -/******************************************************************************/ -/* Function: ip2_interrupt_bh(pB) */ -/* Parameters: pB - pointer to the board structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* Service the board in a bottom half interrupt handler and then */ -/* reenable the board's interrupts if it has an IRQ number */ -/* */ -/******************************************************************************/ -static void -ip2_interrupt_bh(i2eBordStrPtr pB) -{ -// pB better well be set or we have a problem! We can only get -// here from the IMMEDIATE queue. Here, we process the boards. -// Checking pB doesn't cost much and it saves us from the sanity checkers. - - bh_counter++; - - if ( pB ) { - i2ServiceBoard( pB ); - if( pB->i2eUsingIrq ) { -// Re-enable his interrupts - iiEnableMailIrq(pB); - } - } -} - - -/******************************************************************************/ -/* Function: ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) */ -/* Parameters: irq - interrupt number */ -/* pointer to optional device ID structure */ -/* pointer to register structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* Our task here is simply to identify each board which needs servicing. */ -/* If we are queuing then, queue it to be serviced, and disable its irq */ -/* mask otherwise process the board directly. */ -/* */ -/* We could queue by IRQ but that just complicates things on both ends */ -/* with very little gain in performance (how many instructions does */ -/* it take to iterate on the immediate queue). */ -/* */ -/* */ -/******************************************************************************/ -static irqreturn_t -ip2_interrupt(int irq, void *dev_id, struct pt_regs * regs) -{ - int i; - i2eBordStrPtr pB; - int handled = 0; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, 99, 1, irq ); - - /* Service just the boards on the list using this irq */ - for( i = 0; i < i2nBoards; ++i ) { - pB = i2BoardPtrTable[i]; - -// Only process those boards which match our IRQ. -// IRQ = 0 for polled boards, we won't poll "IRQ" boards - - if ( pB && (pB->i2eUsingIrq == irq) ) { - handled = 1; -#ifdef USE_IQI - - if (NO_MAIL_HERE != ( pB->i2eStartMail = iiGetMail(pB))) { -// Disable his interrupt (will be enabled when serviced) -// This is mostly to protect from reentrancy. - iiDisableMailIrq(pB); - -// Park the board on the immediate queue for processing. - schedule_work(&pB->tqueue_interrupt); - -// Make sure the immediate queue is flagged to fire. - } -#else -// We are using immediate servicing here. This sucks and can -// cause all sorts of havoc with ppp and others. The failsafe -// check on iiSendPendingMail could also throw a hairball. - i2ServiceBoard( pB ); -#endif /* USE_IQI */ - } - } - - ++irq_counter; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); - return IRQ_RETVAL(handled); -} - -/******************************************************************************/ -/* Function: ip2_poll(unsigned long arg) */ -/* Parameters: ? */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function calls the library routine i2ServiceBoard for each board in */ -/* the board table. This is used instead of the interrupt routine when polled */ -/* mode is specified. */ -/******************************************************************************/ -static void -ip2_poll(unsigned long arg) -{ - ip2trace (ITRC_NO_PORT, ITRC_INTR, 100, 0 ); - - TimerOn = 0; // it's the truth but not checked in service - - // Just polled boards, IRQ = 0 will hit all non-interrupt boards. - // It will NOT poll boards handled by hard interrupts. - // The issue of queued BH interrups is handled in ip2_interrupt(). - ip2_interrupt(0, NULL, NULL); - - PollTimer.expires = POLL_TIMEOUT; - add_timer( &PollTimer ); - TimerOn = 1; - - ip2trace (ITRC_NO_PORT, ITRC_INTR, ITRC_RETURN, 0 ); -} - -static void do_input(void *p) -{ - i2ChanStrPtr pCh = p; - unsigned long flags; - - ip2trace(CHANN, ITRC_INPUT, 21, 0 ); - - // Data input - if ( pCh->pTTY != NULL ) { - READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) - if (!pCh->throttled && (pCh->Ibuf_stuff != pCh->Ibuf_strip)) { - READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) - i2Input( pCh ); - } else - READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) - } else { - ip2trace(CHANN, ITRC_INPUT, 22, 0 ); - - i2InputFlush( pCh ); - } -} - -// code duplicated from n_tty (ldisc) -static inline void isig(int sig, struct tty_struct *tty, int flush) -{ - if (tty->pgrp > 0) - kill_pg(tty->pgrp, sig, 1); - if (flush || !L_NOFLSH(tty)) { - if ( tty->ldisc.flush_buffer ) - tty->ldisc.flush_buffer(tty); - i2InputFlush( tty->driver_data ); - } -} - -static void do_status(void *p) -{ - i2ChanStrPtr pCh = p; - int status; - - status = i2GetStatus( pCh, (I2_BRK|I2_PAR|I2_FRA|I2_OVR) ); - - ip2trace (CHANN, ITRC_STATUS, 21, 1, status ); - - if (pCh->pTTY && (status & (I2_BRK|I2_PAR|I2_FRA|I2_OVR)) ) { - if ( (status & I2_BRK) ) { - // code duplicated from n_tty (ldisc) - if (I_IGNBRK(pCh->pTTY)) - goto skip_this; - if (I_BRKINT(pCh->pTTY)) { - isig(SIGINT, pCh->pTTY, 1); - goto skip_this; - } - wake_up_interruptible(&pCh->pTTY->read_wait); - } -#ifdef NEVER_HAPPENS_AS_SETUP_XXX - // and can't work because we don't know the_char - // as the_char is reported on a separate path - // The intelligent board does this stuff as setup - { - char brkf = TTY_NORMAL; - unsigned char brkc = '\0'; - unsigned char tmp; - if ( (status & I2_BRK) ) { - brkf = TTY_BREAK; - brkc = '\0'; - } - else if (status & I2_PAR) { - brkf = TTY_PARITY; - brkc = the_char; - } else if (status & I2_FRA) { - brkf = TTY_FRAME; - brkc = the_char; - } else if (status & I2_OVR) { - brkf = TTY_OVERRUN; - brkc = the_char; - } - tmp = pCh->pTTY->real_raw; - pCh->pTTY->real_raw = 0; - pCh->pTTY->ldisc.receive_buf( pCh->pTTY, &brkc, &brkf, 1 ); - pCh->pTTY->real_raw = tmp; - } -#endif /* NEVER_HAPPENS_AS_SETUP_XXX */ - } -skip_this: - - if ( status & (I2_DDCD | I2_DDSR | I2_DCTS | I2_DRI) ) { - wake_up_interruptible(&pCh->delta_msr_wait); - - if ( (pCh->flags & ASYNC_CHECK_CD) && (status & I2_DDCD) ) { - if ( status & I2_DCD ) { - if ( pCh->wopen ) { - wake_up_interruptible ( &pCh->open_wait ); - } - } else { - if (pCh->pTTY && (!(pCh->pTTY->termios->c_cflag & CLOCAL)) ) { - tty_hangup( pCh->pTTY ); - } - } - } - } - - ip2trace (CHANN, ITRC_STATUS, 26, 0 ); -} - -/******************************************************************************/ -/* Device Open/Close/Ioctl Entry Point Section */ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: open_sanity_check() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* Verifies the structure magic numbers and cross links. */ -/******************************************************************************/ -#ifdef IP2DEBUG_OPEN -static void -open_sanity_check( i2ChanStrPtr pCh, i2eBordStrPtr pBrd ) -{ - if ( pBrd->i2eValid != I2E_MAGIC ) { - printk(KERN_ERR "IP2: invalid board structure\n" ); - } else if ( pBrd != pCh->pMyBord ) { - printk(KERN_ERR "IP2: board structure pointer mismatch (%p)\n", - pCh->pMyBord ); - } else if ( pBrd->i2eChannelCnt < pCh->port_index ) { - printk(KERN_ERR "IP2: bad device index (%d)\n", pCh->port_index ); - } else if (&((i2ChanStrPtr)pBrd->i2eChannelPtr)[pCh->port_index] != pCh) { - } else { - printk(KERN_INFO "IP2: all pointers check out!\n" ); - } -} -#endif - - -/******************************************************************************/ -/* Function: ip2_open() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: (MANDATORY) */ -/* A successful device open has to run a gauntlet of checks before it */ -/* completes. After some sanity checking and pointer setup, the function */ -/* blocks until all conditions are satisfied. It then initialises the port to */ -/* the default characteristics and returns. */ -/******************************************************************************/ -static int -ip2_open( PTTY tty, struct file *pFile ) -{ - wait_queue_t wait; - int rc = 0; - int do_clocal = 0; - i2ChanStrPtr pCh = DevTable[tty->index]; - - ip2trace (tty->index, ITRC_OPEN, ITRC_ENTER, 0 ); - - if ( pCh == NULL ) { - return -ENODEV; - } - /* Setup pointer links in device and tty structures */ - pCh->pTTY = tty; - tty->driver_data = pCh; - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG \ - "IP2:open(tty=%p,pFile=%p):dev=%s,ch=%d,idx=%d\n", - tty, pFile, tty->name, pCh->infl.hd.i2sChannel, pCh->port_index); - open_sanity_check ( pCh, pCh->pMyBord ); -#endif - - i2QueueCommands(PTYPE_INLINE, pCh, 100, 3, CMD_DTRUP,CMD_RTSUP,CMD_DCD_REP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - serviceOutgoingFifo( pCh->pMyBord ); - - /* Block here until the port is ready (per serial and istallion) */ - /* - * 1. If the port is in the middle of closing wait for the completion - * and then return the appropriate error. - */ - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->close_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - if ( tty_hung_up_p(pFile) || ( pCh->flags & ASYNC_CLOSING )) { - if ( pCh->flags & ASYNC_CLOSING ) { - schedule(); - } - if ( tty_hung_up_p(pFile) ) { - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->close_wait, &wait); - return( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS; - } - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->close_wait, &wait); - - /* - * 3. Handle a non-blocking open of a normal port. - */ - if ( (pFile->f_flags & O_NONBLOCK) || (tty->flags & (1<flags |= ASYNC_NORMAL_ACTIVE; - goto noblock; - } - /* - * 4. Now loop waiting for the port to be free and carrier present - * (if required). - */ - if ( tty->termios->c_cflag & CLOCAL ) - do_clocal = 1; - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "OpenBlock: do_clocal = %d\n", do_clocal); -#endif - - ++pCh->wopen; - - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->open_wait, &wait); - - for(;;) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - set_current_state( TASK_INTERRUPTIBLE ); - serviceOutgoingFifo( pCh->pMyBord ); - if ( tty_hung_up_p(pFile) ) { - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->open_wait, &wait); - return ( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EBUSY : -ERESTARTSYS; - } - if (!(pCh->flags & ASYNC_CLOSING) && - (do_clocal || (pCh->dataSetIn & I2_DCD) )) { - rc = 0; - break; - } - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "ASYNC_CLOSING = %s\n", - (pCh->flags & ASYNC_CLOSING)?"True":"False"); - printk(KERN_DEBUG "OpenBlock: waiting for CD or signal\n"); -#endif - ip2trace (CHANN, ITRC_OPEN, 3, 2, 0, - (pCh->flags & ASYNC_CLOSING) ); - /* check for signal */ - if (signal_pending(current)) { - rc = (( pCh->flags & ASYNC_HUP_NOTIFY ) ? -EAGAIN : -ERESTARTSYS); - break; - } - schedule(); - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->open_wait, &wait); - - --pCh->wopen; //why count? - - ip2trace (CHANN, ITRC_OPEN, 4, 0 ); - - if (rc != 0 ) { - return rc; - } - pCh->flags |= ASYNC_NORMAL_ACTIVE; - -noblock: - - /* first open - Assign termios structure to port */ - if ( tty->count == 1 ) { - i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - /* Now we must send the termios settings to the loadware */ - set_params( pCh, NULL ); - } - - /* - * Now set any i2lib options. These may go away if the i2lib code ends - * up rolled into the mainline. - */ - pCh->channelOptions |= CO_NBLOCK_WRITE; - -#ifdef IP2DEBUG_OPEN - printk (KERN_DEBUG "IP2: open completed\n" ); -#endif - serviceOutgoingFifo( pCh->pMyBord ); - - ip2trace (CHANN, ITRC_OPEN, ITRC_RETURN, 0 ); - - return 0; -} - -/******************************************************************************/ -/* Function: ip2_close() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_close( PTTY tty, struct file *pFile ) -{ - i2ChanStrPtr pCh = tty->driver_data; - - if ( !pCh ) { - return; - } - - ip2trace (CHANN, ITRC_CLOSE, ITRC_ENTER, 0 ); - -#ifdef IP2DEBUG_OPEN - printk(KERN_DEBUG "IP2:close %s:\n",tty->name); -#endif - - if ( tty_hung_up_p ( pFile ) ) { - - ip2trace (CHANN, ITRC_CLOSE, 2, 1, 2 ); - - return; - } - if ( tty->count > 1 ) { /* not the last close */ - - ip2trace (CHANN, ITRC_CLOSE, 2, 1, 3 ); - - return; - } - pCh->flags |= ASYNC_CLOSING; // last close actually - - tty->closing = 1; - - if (pCh->ClosingWaitTime != ASYNC_CLOSING_WAIT_NONE) { - /* - * Before we drop DTR, make sure the transmitter has completely drained. - * This uses an timeout, after which the close - * completes. - */ - ip2_wait_until_sent(tty, pCh->ClosingWaitTime ); - } - /* - * At this point we stop accepting input. Here we flush the channel - * input buffer which will allow the board to send up more data. Any - * additional input is tossed at interrupt/poll time. - */ - i2InputFlush( pCh ); - - /* disable DSS reporting */ - i2QueueCommands(PTYPE_INLINE, pCh, 100, 4, - CMD_DCD_NREP, CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - if ( !tty || (tty->termios->c_cflag & HUPCL) ) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - } - - serviceOutgoingFifo ( pCh->pMyBord ); - - if ( tty->driver->flush_buffer ) - tty->driver->flush_buffer(tty); - if ( tty->ldisc.flush_buffer ) - tty->ldisc.flush_buffer(tty); - tty->closing = 0; - - pCh->pTTY = NULL; - - if (pCh->wopen) { - if (pCh->ClosingDelay) { - msleep_interruptible(jiffies_to_msecs(pCh->ClosingDelay)); - } - wake_up_interruptible(&pCh->open_wait); - } - - pCh->flags &=~(ASYNC_NORMAL_ACTIVE|ASYNC_CLOSING); - wake_up_interruptible(&pCh->close_wait); - -#ifdef IP2DEBUG_OPEN - DBG_CNT("ip2_close: after wakeups--"); -#endif - - - ip2trace (CHANN, ITRC_CLOSE, ITRC_RETURN, 1, 1 ); - - return; -} - -/******************************************************************************/ -/* Function: ip2_hangup() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_hangup ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - - if( !pCh ) { - return; - } - - ip2trace (CHANN, ITRC_HANGUP, ITRC_ENTER, 0 ); - - ip2_flush_buffer(tty); - - /* disable DSS reporting */ - - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_DCD_NREP); - i2QueueCommands(PTYPE_INLINE, pCh, 0, 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - if ( (tty->termios->c_cflag & HUPCL) ) { - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - } - i2QueueCommands(PTYPE_INLINE, pCh, 1, 3, - CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - serviceOutgoingFifo ( pCh->pMyBord ); - - wake_up_interruptible ( &pCh->delta_msr_wait ); - - pCh->flags &= ~ASYNC_NORMAL_ACTIVE; - pCh->pTTY = NULL; - wake_up_interruptible ( &pCh->open_wait ); - - ip2trace (CHANN, ITRC_HANGUP, ITRC_RETURN, 0 ); -} - -/******************************************************************************/ -/******************************************************************************/ -/* Device Output Section */ -/******************************************************************************/ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_write() */ -/* Parameters: Pointer to tty structure */ -/* Flag denoting data is in user (1) or kernel (0) space */ -/* Pointer to data */ -/* Number of bytes to write */ -/* Returns: Number of bytes actually written */ -/* */ -/* Description: (MANDATORY) */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_write( PTTY tty, const unsigned char *pData, int count) -{ - i2ChanStrPtr pCh = tty->driver_data; - int bytesSent = 0; - unsigned long flags; - - ip2trace (CHANN, ITRC_WRITE, ITRC_ENTER, 2, count, -1 ); - - /* Flush out any buffered data left over from ip2_putchar() calls. */ - ip2_flush_chars( tty ); - - /* This is the actual move bit. Make sure it does what we need!!!!! */ - WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); - bytesSent = i2Output( pCh, pData, count, 0 ); - WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); - - ip2trace (CHANN, ITRC_WRITE, ITRC_RETURN, 1, bytesSent ); - - return bytesSent > 0 ? bytesSent : 0; -} - -/******************************************************************************/ -/* Function: ip2_putchar() */ -/* Parameters: Pointer to tty structure */ -/* Character to write */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_putchar( PTTY tty, unsigned char ch ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - -// ip2trace (CHANN, ITRC_PUTC, ITRC_ENTER, 1, ch ); - - WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); - pCh->Pbuf[pCh->Pbuf_stuff++] = ch; - if ( pCh->Pbuf_stuff == sizeof pCh->Pbuf ) { - WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); - ip2_flush_chars( tty ); - } else - WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); - -// ip2trace (CHANN, ITRC_PUTC, ITRC_RETURN, 1, ch ); -} - -/******************************************************************************/ -/* Function: ip2_flush_chars() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/******************************************************************************/ -static void -ip2_flush_chars( PTTY tty ) -{ - int strip; - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); - if ( pCh->Pbuf_stuff ) { - -// ip2trace (CHANN, ITRC_PUTC, 10, 1, strip ); - - // - // We may need to restart i2Output if it does not fullfill this request - // - strip = i2Output( pCh, pCh->Pbuf, pCh->Pbuf_stuff, 0 ); - if ( strip != pCh->Pbuf_stuff ) { - memmove( pCh->Pbuf, &pCh->Pbuf[strip], pCh->Pbuf_stuff - strip ); - } - pCh->Pbuf_stuff -= strip; - } - WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); -} - -/******************************************************************************/ -/* Function: ip2_write_room() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Number of bytes that the driver can accept */ -/* */ -/* Description: */ -/* */ -/******************************************************************************/ -static int -ip2_write_room ( PTTY tty ) -{ - int bytesFree; - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); - bytesFree = i2OutputFree( pCh ) - pCh->Pbuf_stuff; - READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); - - ip2trace (CHANN, ITRC_WRITE, 11, 1, bytesFree ); - - return ((bytesFree > 0) ? bytesFree : 0); -} - -/******************************************************************************/ -/* Function: ip2_chars_in_buf() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Number of bytes queued for transmission */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_chars_in_buf ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - int rc; - unsigned long flags; - - ip2trace (CHANN, ITRC_WRITE, 12, 1, pCh->Obuf_char_count + pCh->Pbuf_stuff ); - -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: chars in buffer = %d (%d,%d)\n", - pCh->Obuf_char_count + pCh->Pbuf_stuff, - pCh->Obuf_char_count, pCh->Pbuf_stuff ); -#endif - READ_LOCK_IRQSAVE(&pCh->Obuf_spinlock,flags); - rc = pCh->Obuf_char_count; - READ_UNLOCK_IRQRESTORE(&pCh->Obuf_spinlock,flags); - READ_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); - rc += pCh->Pbuf_stuff; - READ_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); - return rc; -} - -/******************************************************************************/ -/* Function: ip2_flush_buffer() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_flush_buffer( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - - ip2trace (CHANN, ITRC_FLUSH, ITRC_ENTER, 0 ); - -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: flush buffer\n" ); -#endif - WRITE_LOCK_IRQSAVE(&pCh->Pbuf_spinlock,flags); - pCh->Pbuf_stuff = 0; - WRITE_UNLOCK_IRQRESTORE(&pCh->Pbuf_spinlock,flags); - i2FlushOutput( pCh ); - ip2_owake(tty); - - ip2trace (CHANN, ITRC_FLUSH, ITRC_RETURN, 0 ); - -} - -/******************************************************************************/ -/* Function: ip2_wait_until_sent() */ -/* Parameters: Pointer to tty structure */ -/* Timeout for wait. */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function is used in place of the normal tty_wait_until_sent, which */ -/* only waits for the driver buffers to be empty (or rather, those buffers */ -/* reported by chars_in_buffer) which doesn't work for IP2 due to the */ -/* indeterminate number of bytes buffered on the board. */ -/******************************************************************************/ -static void -ip2_wait_until_sent ( PTTY tty, int timeout ) -{ - int i = jiffies; - i2ChanStrPtr pCh = tty->driver_data; - - tty_wait_until_sent(tty, timeout ); - if ( (i = timeout - (jiffies -i)) > 0) - i2DrainOutput( pCh, i ); -} - -/******************************************************************************/ -/******************************************************************************/ -/* Device Input Section */ -/******************************************************************************/ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_throttle() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_throttle ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "IP2: throttle\n" ); -#endif - /* - * Signal the poll/interrupt handlers not to forward incoming data to - * the line discipline. This will cause the buffers to fill up in the - * library and thus cause the library routines to send the flow control - * stuff. - */ - pCh->throttled = 1; -} - -/******************************************************************************/ -/* Function: ip2_unthrottle() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_unthrottle ( PTTY tty ) -{ - i2ChanStrPtr pCh = tty->driver_data; - unsigned long flags; - -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "IP2: unthrottle\n" ); -#endif - - /* Pass incoming data up to the line discipline again. */ - pCh->throttled = 0; - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); - serviceOutgoingFifo( pCh->pMyBord ); - READ_LOCK_IRQSAVE(&pCh->Ibuf_spinlock,flags) - if ( pCh->Ibuf_stuff != pCh->Ibuf_strip ) { - READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) -#ifdef IP2DEBUG_READ - printk (KERN_DEBUG "i2Input called from unthrottle\n" ); -#endif - i2Input( pCh ); - } else - READ_UNLOCK_IRQRESTORE(&pCh->Ibuf_spinlock,flags) -} - -static void -ip2_start ( PTTY tty ) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - i2QueueCommands(PTYPE_BYPASS, pCh, 0, 1, CMD_RESUME); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_UNSUSPEND); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_RESUME); -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: start tx\n" ); -#endif -} - -static void -ip2_stop ( PTTY tty ) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_SUSPEND); -#ifdef IP2DEBUG_WRITE - printk (KERN_DEBUG "IP2: stop tx\n" ); -#endif -} - -/******************************************************************************/ -/* Device Ioctl Section */ -/******************************************************************************/ - -static int ip2_tiocmget(struct tty_struct *tty, struct file *file) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; -#ifdef ENABLE_DSSNOW - wait_queue_t wait; -#endif - - if (pCh == NULL) - return -ENODEV; - -/* - FIXME - the following code is causing a NULL pointer dereference in - 2.3.51 in an interrupt handler. It's suppose to prompt the board - to return the DSS signal status immediately. Why doesn't it do - the same thing in 2.2.14? -*/ - -/* This thing is still busted in the 1.2.12 driver on 2.4.x - and even hoses the serial console so the oops can be trapped. - /\/\|=mhw=|\/\/ */ - -#ifdef ENABLE_DSSNOW - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DSS_NOW); - - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->dss_now_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pCh->pMyBord ); - - schedule(); - - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->dss_now_wait, &wait); - - if (signal_pending(current)) { - return -EINTR; - } -#endif - return ((pCh->dataSetOut & I2_RTS) ? TIOCM_RTS : 0) - | ((pCh->dataSetOut & I2_DTR) ? TIOCM_DTR : 0) - | ((pCh->dataSetIn & I2_DCD) ? TIOCM_CAR : 0) - | ((pCh->dataSetIn & I2_RI) ? TIOCM_RNG : 0) - | ((pCh->dataSetIn & I2_DSR) ? TIOCM_DSR : 0) - | ((pCh->dataSetIn & I2_CTS) ? TIOCM_CTS : 0); -} - -static int ip2_tiocmset(struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - i2ChanStrPtr pCh = DevTable[tty->index]; - - if (pCh == NULL) - return -ENODEV; - - if (set & TIOCM_RTS) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSUP); - pCh->dataSetOut |= I2_RTS; - } - if (set & TIOCM_DTR) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRUP); - pCh->dataSetOut |= I2_DTR; - } - - if (clear & TIOCM_RTS) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_RTSDN); - pCh->dataSetOut &= ~I2_RTS; - } - if (clear & TIOCM_DTR) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DTRDN); - pCh->dataSetOut &= ~I2_DTR; - } - serviceOutgoingFifo( pCh->pMyBord ); - return 0; -} - -/******************************************************************************/ -/* Function: ip2_ioctl() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to file structure */ -/* Command */ -/* Argument */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_ioctl ( PTTY tty, struct file *pFile, UINT cmd, ULONG arg ) -{ - wait_queue_t wait; - i2ChanStrPtr pCh = DevTable[tty->index]; - i2eBordStrPtr pB; - struct async_icount cprev, cnow; /* kernel counter temps */ - struct serial_icounter_struct __user *p_cuser; - int rc = 0; - unsigned long flags; - void __user *argp = (void __user *)arg; - - if ( pCh == NULL ) - return -ENODEV; - - pB = pCh->pMyBord; - - ip2trace (CHANN, ITRC_IOCTL, ITRC_ENTER, 2, cmd, arg ); - -#ifdef IP2DEBUG_IOCTL - printk(KERN_DEBUG "IP2: ioctl cmd (%x), arg (%lx)\n", cmd, arg ); -#endif - - switch(cmd) { - case TIOCGSERIAL: - - ip2trace (CHANN, ITRC_IOCTL, 2, 1, rc ); - - rc = get_serial_info(pCh, argp); - if (rc) - return rc; - break; - - case TIOCSSERIAL: - - ip2trace (CHANN, ITRC_IOCTL, 3, 1, rc ); - - rc = set_serial_info(pCh, argp); - if (rc) - return rc; - break; - - case TCXONC: - rc = tty_check_change(tty); - if (rc) - return rc; - switch (arg) { - case TCOOFF: - //return -ENOIOCTLCMD; - break; - case TCOON: - //return -ENOIOCTLCMD; - break; - case TCIOFF: - if (STOP_CHAR(tty) != __DISABLED_CHAR) { - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, - CMD_XMIT_NOW(STOP_CHAR(tty))); - } - break; - case TCION: - if (START_CHAR(tty) != __DISABLED_CHAR) { - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 1, - CMD_XMIT_NOW(START_CHAR(tty))); - } - break; - default: - return -EINVAL; - } - return 0; - - case TCSBRK: /* SVID version: non-zero arg --> no break */ - rc = tty_check_change(tty); - - ip2trace (CHANN, ITRC_IOCTL, 4, 1, rc ); - - if (!rc) { - ip2_wait_until_sent(tty,0); - if (!arg) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SEND_BRK(250)); - serviceOutgoingFifo( pCh->pMyBord ); - } - } - break; - - case TCSBRKP: /* support for POSIX tcsendbreak() */ - rc = tty_check_change(tty); - - ip2trace (CHANN, ITRC_IOCTL, 5, 1, rc ); - - if (!rc) { - ip2_wait_until_sent(tty,0); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_SEND_BRK(arg ? arg*100 : 250)); - serviceOutgoingFifo ( pCh->pMyBord ); - } - break; - - case TIOCGSOFTCAR: - - ip2trace (CHANN, ITRC_IOCTL, 6, 1, rc ); - - rc = put_user(C_CLOCAL(tty) ? 1 : 0, (unsigned long __user *)argp); - if (rc) - return rc; - break; - - case TIOCSSOFTCAR: - - ip2trace (CHANN, ITRC_IOCTL, 7, 1, rc ); - - rc = get_user(arg,(unsigned long __user *) argp); - if (rc) - return rc; - tty->termios->c_cflag = ((tty->termios->c_cflag & ~CLOCAL) - | (arg ? CLOCAL : 0)); - - break; - - /* - * Wait for any of the 4 modem inputs (DCD,RI,DSR,CTS) to change - mask - * passed in arg for lines of interest (use |'ed TIOCM_RNG/DSR/CD/CTS - * for masking). Caller should use TIOCGICOUNT to see which one it was - */ - case TIOCMIWAIT: - WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); - cprev = pCh->icount; /* note the counters on entry */ - WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 4, - CMD_DCD_REP, CMD_CTS_REP, CMD_DSR_REP, CMD_RI_REP); - init_waitqueue_entry(&wait, current); - add_wait_queue(&pCh->delta_msr_wait, &wait); - set_current_state( TASK_INTERRUPTIBLE ); - - serviceOutgoingFifo( pCh->pMyBord ); - for(;;) { - ip2trace (CHANN, ITRC_IOCTL, 10, 0 ); - - schedule(); - - ip2trace (CHANN, ITRC_IOCTL, 11, 0 ); - - /* see if a signal did it */ - if (signal_pending(current)) { - rc = -ERESTARTSYS; - break; - } - WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); - cnow = pCh->icount; /* atomic copy */ - WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); - if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr && - cnow.dcd == cprev.dcd && cnow.cts == cprev.cts) { - rc = -EIO; /* no change => rc */ - break; - } - if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) || - ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) || - ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) || - ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts)) ) { - rc = 0; - break; - } - cprev = cnow; - } - set_current_state( TASK_RUNNING ); - remove_wait_queue(&pCh->delta_msr_wait, &wait); - - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 3, - CMD_CTS_NREP, CMD_DSR_NREP, CMD_RI_NREP); - if ( ! (pCh->flags & ASYNC_CHECK_CD)) { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DCD_NREP); - } - serviceOutgoingFifo( pCh->pMyBord ); - return rc; - break; - - /* - * Get counter of input serial line interrupts (DCD,RI,DSR,CTS) - * Return: write counters to the user passed counter struct - * NB: both 1->0 and 0->1 transitions are counted except for RI where - * only 0->1 is counted. The controller is quite capable of counting - * both, but this done to preserve compatibility with the standard - * serial driver. - */ - case TIOCGICOUNT: - ip2trace (CHANN, ITRC_IOCTL, 11, 1, rc ); - - WRITE_LOCK_IRQSAVE(&pB->read_fifo_spinlock, flags); - cnow = pCh->icount; - WRITE_UNLOCK_IRQRESTORE(&pB->read_fifo_spinlock, flags); - p_cuser = argp; - rc = put_user(cnow.cts, &p_cuser->cts); - rc = put_user(cnow.dsr, &p_cuser->dsr); - rc = put_user(cnow.rng, &p_cuser->rng); - rc = put_user(cnow.dcd, &p_cuser->dcd); - rc = put_user(cnow.rx, &p_cuser->rx); - rc = put_user(cnow.tx, &p_cuser->tx); - rc = put_user(cnow.frame, &p_cuser->frame); - rc = put_user(cnow.overrun, &p_cuser->overrun); - rc = put_user(cnow.parity, &p_cuser->parity); - rc = put_user(cnow.brk, &p_cuser->brk); - rc = put_user(cnow.buf_overrun, &p_cuser->buf_overrun); - break; - - /* - * The rest are not supported by this driver. By returning -ENOIOCTLCMD they - * will be passed to the line discipline for it to handle. - */ - case TIOCSERCONFIG: - case TIOCSERGWILD: - case TIOCSERGETLSR: - case TIOCSERSWILD: - case TIOCSERGSTRUCT: - case TIOCSERGETMULTI: - case TIOCSERSETMULTI: - - default: - ip2trace (CHANN, ITRC_IOCTL, 12, 0 ); - - rc = -ENOIOCTLCMD; - break; - } - - ip2trace (CHANN, ITRC_IOCTL, ITRC_RETURN, 0 ); - - return rc; -} - -/******************************************************************************/ -/* Function: GetSerialInfo() */ -/* Parameters: Pointer to channel structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This is to support the setserial command, and requires processing of the */ -/* standard Linux serial structure. */ -/******************************************************************************/ -static int -get_serial_info ( i2ChanStrPtr pCh, struct serial_struct __user *retinfo ) -{ - struct serial_struct tmp; - - memset ( &tmp, 0, sizeof(tmp) ); - tmp.type = pCh->pMyBord->channelBtypes.bid_value[(pCh->port_index & (IP2_PORTS_PER_BOARD-1))/16]; - if (BID_HAS_654(tmp.type)) { - tmp.type = PORT_16650; - } else { - tmp.type = PORT_CIRRUS; - } - tmp.line = pCh->port_index; - tmp.port = pCh->pMyBord->i2eBase; - tmp.irq = ip2config.irq[pCh->port_index/64]; - tmp.flags = pCh->flags; - tmp.baud_base = pCh->BaudBase; - tmp.close_delay = pCh->ClosingDelay; - tmp.closing_wait = pCh->ClosingWaitTime; - tmp.custom_divisor = pCh->BaudDivisor; - return copy_to_user(retinfo,&tmp,sizeof(*retinfo)); -} - -/******************************************************************************/ -/* Function: SetSerialInfo() */ -/* Parameters: Pointer to channel structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This function provides support for setserial, which uses the TIOCSSERIAL */ -/* ioctl. Not all setserial parameters are relevant. If the user attempts to */ -/* change the IRQ, address or type of the port the ioctl fails. */ -/******************************************************************************/ -static int -set_serial_info( i2ChanStrPtr pCh, struct serial_struct __user *new_info ) -{ - struct serial_struct ns; - int old_flags, old_baud_divisor; - - if (copy_from_user(&ns, new_info, sizeof (ns))) - return -EFAULT; - - /* - * We don't allow setserial to change IRQ, board address, type or baud - * base. Also line nunber as such is meaningless but we use it for our - * array index so it is fixed also. - */ - if ( (ns.irq != ip2config.irq[pCh->port_index]) - || ((int) ns.port != ((int) (pCh->pMyBord->i2eBase))) - || (ns.baud_base != pCh->BaudBase) - || (ns.line != pCh->port_index) ) { - return -EINVAL; - } - - old_flags = pCh->flags; - old_baud_divisor = pCh->BaudDivisor; - - if ( !capable(CAP_SYS_ADMIN) ) { - if ( ( ns.close_delay != pCh->ClosingDelay ) || - ( (ns.flags & ~ASYNC_USR_MASK) != - (pCh->flags & ~ASYNC_USR_MASK) ) ) { - return -EPERM; - } - - pCh->flags = (pCh->flags & ~ASYNC_USR_MASK) | - (ns.flags & ASYNC_USR_MASK); - pCh->BaudDivisor = ns.custom_divisor; - } else { - pCh->flags = (pCh->flags & ~ASYNC_FLAGS) | - (ns.flags & ASYNC_FLAGS); - pCh->BaudDivisor = ns.custom_divisor; - pCh->ClosingDelay = ns.close_delay * HZ/100; - pCh->ClosingWaitTime = ns.closing_wait * HZ/100; - } - - if ( ( (old_flags & ASYNC_SPD_MASK) != (pCh->flags & ASYNC_SPD_MASK) ) - || (old_baud_divisor != pCh->BaudDivisor) ) { - // Invalidate speed and reset parameters - set_params( pCh, NULL ); - } - - return 0; -} - -/******************************************************************************/ -/* Function: ip2_set_termios() */ -/* Parameters: Pointer to tty structure */ -/* Pointer to old termios structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_set_termios( PTTY tty, struct termios *old_termios ) -{ - i2ChanStrPtr pCh = (i2ChanStrPtr)tty->driver_data; - -#ifdef IP2DEBUG_IOCTL - printk (KERN_DEBUG "IP2: set termios %p\n", old_termios ); -#endif - - set_params( pCh, old_termios ); -} - -/******************************************************************************/ -/* Function: ip2_set_line_discipline() */ -/* Parameters: Pointer to tty structure */ -/* Returns: Nothing */ -/* */ -/* Description: Does nothing */ -/* */ -/* */ -/******************************************************************************/ -static void -ip2_set_line_discipline ( PTTY tty ) -{ -#ifdef IP2DEBUG_IOCTL - printk (KERN_DEBUG "IP2: set line discipline\n" ); -#endif - - ip2trace (((i2ChanStrPtr)tty->driver_data)->port_index, ITRC_IOCTL, 16, 0 ); - -} - -/******************************************************************************/ -/* Function: SetLine Characteristics() */ -/* Parameters: Pointer to channel structure */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* This routine is called to update the channel structure with the new line */ -/* characteristics, and send the appropriate commands to the board when they */ -/* change. */ -/******************************************************************************/ -static void -set_params( i2ChanStrPtr pCh, struct termios *o_tios ) -{ - tcflag_t cflag, iflag, lflag; - char stop_char, start_char; - struct termios dummy; - - lflag = pCh->pTTY->termios->c_lflag; - cflag = pCh->pTTY->termios->c_cflag; - iflag = pCh->pTTY->termios->c_iflag; - - if (o_tios == NULL) { - dummy.c_lflag = ~lflag; - dummy.c_cflag = ~cflag; - dummy.c_iflag = ~iflag; - o_tios = &dummy; - } - - { - switch ( cflag & CBAUD ) { - case B0: - i2QueueCommands( PTYPE_BYPASS, pCh, 100, 2, CMD_RTSDN, CMD_DTRDN); - pCh->dataSetOut &= ~(I2_DTR | I2_RTS); - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_PAUSE(25)); - pCh->pTTY->termios->c_cflag |= (CBAUD & o_tios->c_cflag); - goto service_it; - break; - case B38400: - /* - * This is the speed that is overloaded with all the other high - * speeds, depending upon the flag settings. - */ - if ( ( pCh->flags & ASYNC_SPD_MASK ) == ASYNC_SPD_HI ) { - pCh->speed = CBR_57600; - } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_VHI ) { - pCh->speed = CBR_115200; - } else if ( (pCh->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST ) { - pCh->speed = CBR_C1; - } else { - pCh->speed = CBR_38400; - } - break; - case B50: pCh->speed = CBR_50; break; - case B75: pCh->speed = CBR_75; break; - case B110: pCh->speed = CBR_110; break; - case B134: pCh->speed = CBR_134; break; - case B150: pCh->speed = CBR_150; break; - case B200: pCh->speed = CBR_200; break; - case B300: pCh->speed = CBR_300; break; - case B600: pCh->speed = CBR_600; break; - case B1200: pCh->speed = CBR_1200; break; - case B1800: pCh->speed = CBR_1800; break; - case B2400: pCh->speed = CBR_2400; break; - case B4800: pCh->speed = CBR_4800; break; - case B9600: pCh->speed = CBR_9600; break; - case B19200: pCh->speed = CBR_19200; break; - case B57600: pCh->speed = CBR_57600; break; - case B115200: pCh->speed = CBR_115200; break; - case B153600: pCh->speed = CBR_153600; break; - case B230400: pCh->speed = CBR_230400; break; - case B307200: pCh->speed = CBR_307200; break; - case B460800: pCh->speed = CBR_460800; break; - case B921600: pCh->speed = CBR_921600; break; - default: pCh->speed = CBR_9600; break; - } - if ( pCh->speed == CBR_C1 ) { - // Process the custom speed parameters. - int bps = pCh->BaudBase / pCh->BaudDivisor; - if ( bps == 921600 ) { - pCh->speed = CBR_921600; - } else { - bps = bps/10; - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_BAUD_DEF1(bps) ); - } - } - i2QueueCommands( PTYPE_INLINE, pCh, 100, 1, CMD_SETBAUD(pCh->speed)); - - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 2, CMD_DTRUP, CMD_RTSUP); - pCh->dataSetOut |= (I2_DTR | I2_RTS); - } - if ( (CSTOPB & cflag) ^ (CSTOPB & o_tios->c_cflag)) - { - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, - CMD_SETSTOP( ( cflag & CSTOPB ) ? CST_2 : CST_1)); - } - if (((PARENB|PARODD) & cflag) ^ ((PARENB|PARODD) & o_tios->c_cflag)) - { - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, - CMD_SETPAR( - (cflag & PARENB ? (cflag & PARODD ? CSP_OD : CSP_EV) : CSP_NP) - ) - ); - } - /* byte size and parity */ - if ( (CSIZE & cflag)^(CSIZE & o_tios->c_cflag)) - { - int datasize; - switch ( cflag & CSIZE ) { - case CS5: datasize = CSZ_5; break; - case CS6: datasize = CSZ_6; break; - case CS7: datasize = CSZ_7; break; - case CS8: datasize = CSZ_8; break; - default: datasize = CSZ_5; break; /* as per serial.c */ - } - i2QueueCommands ( PTYPE_INLINE, pCh, 100, 1, CMD_SETBITS(datasize) ); - } - /* Process CTS flow control flag setting */ - if ( (cflag & CRTSCTS) ) { - i2QueueCommands(PTYPE_INLINE, pCh, 100, - 2, CMD_CTSFL_ENAB, CMD_RTSFL_ENAB); - } else { - i2QueueCommands(PTYPE_INLINE, pCh, 100, - 2, CMD_CTSFL_DSAB, CMD_RTSFL_DSAB); - } - // - // Process XON/XOFF flow control flags settings - // - stop_char = STOP_CHAR(pCh->pTTY); - start_char = START_CHAR(pCh->pTTY); - - //////////// can't be \000 - if (stop_char == __DISABLED_CHAR ) - { - stop_char = ~__DISABLED_CHAR; - } - if (start_char == __DISABLED_CHAR ) - { - start_char = ~__DISABLED_CHAR; - } - ///////////////////////////////// - - if ( o_tios->c_cc[VSTART] != start_char ) - { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXON(start_char)); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXON(start_char)); - } - if ( o_tios->c_cc[VSTOP] != stop_char ) - { - i2QueueCommands(PTYPE_BYPASS, pCh, 100, 1, CMD_DEF_IXOFF(stop_char)); - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DEF_OXOFF(stop_char)); - } - if (stop_char == __DISABLED_CHAR ) - { - stop_char = ~__DISABLED_CHAR; //TEST123 - goto no_xoff; - } - if ((iflag & (IXOFF))^(o_tios->c_iflag & (IXOFF))) - { - if ( iflag & IXOFF ) { // Enable XOFF output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_XON)); - } else { // Disable XOFF output flow control -no_xoff: - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_OXON_OPT(COX_NONE)); - } - } - if (start_char == __DISABLED_CHAR ) - { - goto no_xon; - } - if ((iflag & (IXON|IXANY)) ^ (o_tios->c_iflag & (IXON|IXANY))) - { - if ( iflag & IXON ) { - if ( iflag & IXANY ) { // Enable XON/XANY output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XANY)); - } else { // Enable XON output flow control - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_XON)); - } - } else { // Disable XON output flow control -no_xon: - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_IXON_OPT(CIX_NONE)); - } - } - if ( (iflag & ISTRIP) ^ ( o_tios->c_iflag & (ISTRIP)) ) - { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_ISTRIP_OPT((iflag & ISTRIP ? 1 : 0))); - } - if ( (iflag & INPCK) ^ ( o_tios->c_iflag & (INPCK)) ) - { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, - CMD_PARCHK((iflag & INPCK) ? CPK_ENAB : CPK_DSAB)); - } - - if ( (iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) - ^ ( o_tios->c_iflag & (IGNBRK|PARMRK|BRKINT|IGNPAR)) ) - { - char brkrpt = 0; - char parrpt = 0; - - if ( iflag & IGNBRK ) { /* Ignore breaks altogether */ - /* Ignore breaks altogether */ - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_NREP); - } else { - if ( iflag & BRKINT ) { - if ( iflag & PARMRK ) { - brkrpt = 0x0a; // exception an inline triple - } else { - brkrpt = 0x1a; // exception and NULL - } - brkrpt |= 0x04; // flush input - } else { - if ( iflag & PARMRK ) { - brkrpt = 0x0b; //POSIX triple \0377 \0 \0 - } else { - brkrpt = 0x01; // Null only - } - } - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_BRK_REP(brkrpt)); - } - - if (iflag & IGNPAR) { - parrpt = 0x20; - /* would be 2 for not cirrus bug */ - /* would be 0x20 cept for cirrus bug */ - } else { - if ( iflag & PARMRK ) { - /* - * Replace error characters with 3-byte sequence (\0377,\0,char) - */ - parrpt = 0x04 ; - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_ISTRIP_OPT((char)0)); - } else { - parrpt = 0x03; - } - } - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_SET_ERROR(parrpt)); - } - if (cflag & CLOCAL) { - // Status reporting fails for DCD if this is off - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_NREP); - pCh->flags &= ~ASYNC_CHECK_CD; - } else { - i2QueueCommands(PTYPE_INLINE, pCh, 100, 1, CMD_DCD_REP); - pCh->flags |= ASYNC_CHECK_CD; - } - -service_it: - i2DrainOutput( pCh, 100 ); -} - -/******************************************************************************/ -/* IPL Device Section */ -/******************************************************************************/ - -/******************************************************************************/ -/* Function: ip2_ipl_read() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Pointer to data */ -/* Number of bytes to read */ -/* Returns: Success or failure */ -/* */ -/* Description: Ugly */ -/* */ -/* */ -/******************************************************************************/ - -static -ssize_t -ip2_ipl_read(struct file *pFile, char __user *pData, size_t count, loff_t *off ) -{ - unsigned int minor = iminor(pFile->f_dentry->d_inode); - int rc = 0; - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: read %p, %d bytes\n", pData, count ); -#endif - - switch( minor ) { - case 0: // IPL device - rc = -EINVAL; - break; - case 1: // Status dump - rc = -EINVAL; - break; - case 2: // Ping device - rc = -EINVAL; - break; - case 3: // Trace device - rc = DumpTraceBuffer ( pData, count ); - break; - case 4: // Trace device - rc = DumpFifoBuffer ( pData, count ); - break; - default: - rc = -ENODEV; - break; - } - return rc; -} - -static int -DumpFifoBuffer ( char __user *pData, int count ) -{ -#ifdef DEBUG_FIFO - int rc; - rc = copy_to_user(pData, DBGBuf, count); - - printk(KERN_DEBUG "Last index %d\n", I ); - - return count; -#endif /* DEBUG_FIFO */ - return 0; -} - -static int -DumpTraceBuffer ( char __user *pData, int count ) -{ -#ifdef IP2DEBUG_TRACE - int rc; - int dumpcount; - int chunk; - int *pIndex = (int __user *)pData; - - if ( count < (sizeof(int) * 6) ) { - return -EIO; - } - rc = put_user(tracewrap, pIndex ); - rc = put_user(TRACEMAX, ++pIndex ); - rc = put_user(tracestrip, ++pIndex ); - rc = put_user(tracestuff, ++pIndex ); - pData += sizeof(int) * 6; - count -= sizeof(int) * 6; - - dumpcount = tracestuff - tracestrip; - if ( dumpcount < 0 ) { - dumpcount += TRACEMAX; - } - if ( dumpcount > count ) { - dumpcount = count; - } - chunk = TRACEMAX - tracestrip; - if ( dumpcount > chunk ) { - rc = copy_to_user(pData, &tracebuf[tracestrip], - chunk * sizeof(tracebuf[0]) ); - pData += chunk * sizeof(tracebuf[0]); - tracestrip = 0; - chunk = dumpcount - chunk; - } else { - chunk = dumpcount; - } - rc = copy_to_user(pData, &tracebuf[tracestrip], - chunk * sizeof(tracebuf[0]) ); - tracestrip += chunk; - tracewrap = 0; - - rc = put_user(tracestrip, ++pIndex ); - rc = put_user(tracestuff, ++pIndex ); - - return dumpcount; -#else - return 0; -#endif -} - -/******************************************************************************/ -/* Function: ip2_ipl_write() */ -/* Parameters: */ -/* Pointer to file structure */ -/* Pointer to data */ -/* Number of bytes to write */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static ssize_t -ip2_ipl_write(struct file *pFile, const char __user *pData, size_t count, loff_t *off) -{ -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: write %p, %d bytes\n", pData, count ); -#endif - return 0; -} - -/******************************************************************************/ -/* Function: ip2_ipl_ioctl() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Command */ -/* Argument */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_ipl_ioctl ( struct inode *pInode, struct file *pFile, UINT cmd, ULONG arg ) -{ - unsigned int iplminor = iminor(pInode); - int rc = 0; - void __user *argp = (void __user *)arg; - ULONG __user *pIndex = argp; - i2eBordStrPtr pB = i2BoardPtrTable[iplminor / 4]; - i2ChanStrPtr pCh; - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: ioctl cmd %d, arg %ld\n", cmd, arg ); -#endif - - switch ( iplminor ) { - case 0: // IPL device - rc = -EINVAL; - break; - case 1: // Status dump - case 5: - case 9: - case 13: - switch ( cmd ) { - case 64: /* Driver - ip2stat */ - rc = put_user(ip2_tty_driver->refcount, pIndex++ ); - rc = put_user(irq_counter, pIndex++ ); - rc = put_user(bh_counter, pIndex++ ); - break; - - case 65: /* Board - ip2stat */ - if ( pB ) { - rc = copy_to_user(argp, pB, sizeof(i2eBordStr)); - rc = put_user(INB(pB->i2eStatus), - (ULONG __user *)(arg + (ULONG)(&pB->i2eStatus) - (ULONG)pB ) ); - } else { - rc = -ENODEV; - } - break; - - default: - if (cmd < IP2_MAX_PORTS) { - pCh = DevTable[cmd]; - if ( pCh ) - { - rc = copy_to_user(argp, pCh, sizeof(i2ChanStr)); - } else { - rc = -ENODEV; - } - } else { - rc = -EINVAL; - } - } - break; - - case 2: // Ping device - rc = -EINVAL; - break; - case 3: // Trace device - if ( cmd == 1 ) { - rc = put_user(iiSendPendingMail, pIndex++ ); - rc = put_user(i2InitChannels, pIndex++ ); - rc = put_user(i2QueueNeeds, pIndex++ ); - rc = put_user(i2QueueCommands, pIndex++ ); - rc = put_user(i2GetStatus, pIndex++ ); - rc = put_user(i2Input, pIndex++ ); - rc = put_user(i2InputFlush, pIndex++ ); - rc = put_user(i2Output, pIndex++ ); - rc = put_user(i2FlushOutput, pIndex++ ); - rc = put_user(i2DrainWakeup, pIndex++ ); - rc = put_user(i2DrainOutput, pIndex++ ); - rc = put_user(i2OutputFree, pIndex++ ); - rc = put_user(i2StripFifo, pIndex++ ); - rc = put_user(i2StuffFifoBypass, pIndex++ ); - rc = put_user(i2StuffFifoFlow, pIndex++ ); - rc = put_user(i2StuffFifoInline, pIndex++ ); - rc = put_user(i2ServiceBoard, pIndex++ ); - rc = put_user(serviceOutgoingFifo, pIndex++ ); - // rc = put_user(ip2_init, pIndex++ ); - rc = put_user(ip2_init_board, pIndex++ ); - rc = put_user(find_eisa_board, pIndex++ ); - rc = put_user(set_irq, pIndex++ ); - rc = put_user(ip2_interrupt, pIndex++ ); - rc = put_user(ip2_poll, pIndex++ ); - rc = put_user(service_all_boards, pIndex++ ); - rc = put_user(do_input, pIndex++ ); - rc = put_user(do_status, pIndex++ ); -#ifndef IP2DEBUG_OPEN - rc = put_user(0, pIndex++ ); -#else - rc = put_user(open_sanity_check, pIndex++ ); -#endif - rc = put_user(ip2_open, pIndex++ ); - rc = put_user(ip2_close, pIndex++ ); - rc = put_user(ip2_hangup, pIndex++ ); - rc = put_user(ip2_write, pIndex++ ); - rc = put_user(ip2_putchar, pIndex++ ); - rc = put_user(ip2_flush_chars, pIndex++ ); - rc = put_user(ip2_write_room, pIndex++ ); - rc = put_user(ip2_chars_in_buf, pIndex++ ); - rc = put_user(ip2_flush_buffer, pIndex++ ); - - //rc = put_user(ip2_wait_until_sent, pIndex++ ); - rc = put_user(0, pIndex++ ); - - rc = put_user(ip2_throttle, pIndex++ ); - rc = put_user(ip2_unthrottle, pIndex++ ); - rc = put_user(ip2_ioctl, pIndex++ ); - rc = put_user(0, pIndex++ ); - rc = put_user(get_serial_info, pIndex++ ); - rc = put_user(set_serial_info, pIndex++ ); - rc = put_user(ip2_set_termios, pIndex++ ); - rc = put_user(ip2_set_line_discipline, pIndex++ ); - rc = put_user(set_params, pIndex++ ); - } else { - rc = -EINVAL; - } - - break; - - default: - rc = -ENODEV; - break; - } - return rc; -} - -/******************************************************************************/ -/* Function: ip2_ipl_open() */ -/* Parameters: Pointer to device inode */ -/* Pointer to file structure */ -/* Returns: Success or failure */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -static int -ip2_ipl_open( struct inode *pInode, struct file *pFile ) -{ - unsigned int iplminor = iminor(pInode); - i2eBordStrPtr pB; - i2ChanStrPtr pCh; - -#ifdef IP2DEBUG_IPL - printk (KERN_DEBUG "IP2IPL: open\n" ); -#endif - - switch(iplminor) { - // These are the IPL devices - case 0: - case 4: - case 8: - case 12: - break; - - // These are the status devices - case 1: - case 5: - case 9: - case 13: - break; - - // These are the debug devices - case 2: - case 6: - case 10: - case 14: - pB = i2BoardPtrTable[iplminor / 4]; - pCh = (i2ChanStrPtr) pB->i2eChannelPtr; - break; - - // This is the trace device - case 3: - break; - } - return 0; -} -/******************************************************************************/ -/* Function: ip2_read_procmem */ -/* Parameters: */ -/* */ -/* Returns: Length of output */ -/* */ -/* Description: */ -/* Supplies some driver operating parameters */ -/* Not real useful unless your debugging the fifo */ -/* */ -/******************************************************************************/ - -#define LIMIT (PAGE_SIZE - 120) - -static int -ip2_read_procmem(char *buf, char **start, off_t offset, int len) -{ - i2eBordStrPtr pB; - i2ChanStrPtr pCh; - PTTY tty; - int i; - - len = 0; - -#define FMTLINE "%3d: 0x%08x 0x%08x 0%011o 0%011o\n" -#define FMTLIN2 " 0x%04x 0x%04x tx flow 0x%x\n" -#define FMTLIN3 " 0x%04x 0x%04x rc flow\n" - - len += sprintf(buf+len,"\n"); - - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - pB = i2BoardPtrTable[i]; - if ( pB ) { - len += sprintf(buf+len,"board %d:\n",i); - len += sprintf(buf+len,"\tFifo rem: %d mty: %x outM %x\n", - pB->i2eFifoRemains,pB->i2eWaitingForEmptyFifo,pB->i2eOutMailWaiting); - } - } - - len += sprintf(buf+len,"#: tty flags, port flags, cflags, iflags\n"); - for (i=0; i < IP2_MAX_PORTS; i++) { - if (len > LIMIT) - break; - pCh = DevTable[i]; - if (pCh) { - tty = pCh->pTTY; - if (tty && tty->count) { - len += sprintf(buf+len,FMTLINE,i,(int)tty->flags,pCh->flags, - tty->termios->c_cflag,tty->termios->c_iflag); - - len += sprintf(buf+len,FMTLIN2, - pCh->outfl.asof,pCh->outfl.room,pCh->channelNeeds); - len += sprintf(buf+len,FMTLIN3,pCh->infl.asof,pCh->infl.room); - } - } - } - return len; -} - -/* - * This is the handler for /proc/tty/driver/ip2 - * - * This stretch of code has been largely plagerized from at least three - * different sources including ip2mkdev.c and a couple of other drivers. - * The bugs are all mine. :-) =mhw= - */ -static int ip2_read_proc(char *page, char **start, off_t off, - int count, int *eof, void *data) -{ - int i, j, box; - int len = 0; - int boxes = 0; - int ports = 0; - int tports = 0; - off_t begin = 0; - i2eBordStrPtr pB; - - len += sprintf(page, "ip2info: 1.0 driver: %s\n", pcVersion ); - len += sprintf(page+len, "Driver: SMajor=%d CMajor=%d IMajor=%d MaxBoards=%d MaxBoxes=%d MaxPorts=%d\n", - IP2_TTY_MAJOR, IP2_CALLOUT_MAJOR, IP2_IPL_MAJOR, - IP2_MAX_BOARDS, ABS_MAX_BOXES, ABS_BIGGEST_BOX); - - for( i = 0; i < IP2_MAX_BOARDS; ++i ) { - /* This need to be reset for a board by board count... */ - boxes = 0; - pB = i2BoardPtrTable[i]; - if( pB ) { - switch( pB->i2ePom.e.porID & ~POR_ID_RESERVED ) - { - case POR_ID_FIIEX: - len += sprintf( page+len, "Board %d: EX ports=", i ); - for( box = 0; box < ABS_MAX_BOXES; ++box ) - { - ports = 0; - - if( pB->i2eChannelMap[box] != 0 ) ++boxes; - for( j = 0; j < ABS_BIGGEST_BOX; ++j ) - { - if( pB->i2eChannelMap[box] & 1<< j ) { - ++ports; - } - } - len += sprintf( page+len, "%d,", ports ); - tports += ports; - } - - --len; /* Backup over that last comma */ - - len += sprintf( page+len, " boxes=%d width=%d", boxes, pB->i2eDataWidth16 ? 16 : 8 ); - break; - - case POR_ID_II_4: - len += sprintf(page+len, "Board %d: ISA-4 ports=4 boxes=1", i ); - tports = ports = 4; - break; - - case POR_ID_II_8: - len += sprintf(page+len, "Board %d: ISA-8-std ports=8 boxes=1", i ); - tports = ports = 8; - break; - - case POR_ID_II_8R: - len += sprintf(page+len, "Board %d: ISA-8-RJ11 ports=8 boxes=1", i ); - tports = ports = 8; - break; - - default: - len += sprintf(page+len, "Board %d: unknown", i ); - /* Don't try and probe for minor numbers */ - tports = ports = 0; - } - - } else { - /* Don't try and probe for minor numbers */ - len += sprintf(page+len, "Board %d: vacant", i ); - tports = ports = 0; - } - - if( tports ) { - len += sprintf(page+len, " minors=" ); - - for ( box = 0; box < ABS_MAX_BOXES; ++box ) - { - for ( j = 0; j < ABS_BIGGEST_BOX; ++j ) - { - if ( pB->i2eChannelMap[box] & (1 << j) ) - { - len += sprintf (page+len,"%d,", - j + ABS_BIGGEST_BOX * - (box+i*ABS_MAX_BOXES)); - } - } - } - - page[ len - 1 ] = '\n'; /* Overwrite that last comma */ - } else { - len += sprintf (page+len,"\n" ); - } - - if (len+begin > off+count) - break; - if (len+begin < off) { - begin += len; - len = 0; - } - } - - if (i >= IP2_MAX_BOARDS) - *eof = 1; - if (off >= len+begin) - return 0; - - *start = page + (off-begin); - return ((count < begin+len-off) ? count : begin+len-off); - } - -/******************************************************************************/ -/* Function: ip2trace() */ -/* Parameters: Value to add to trace buffer */ -/* Returns: Nothing */ -/* */ -/* Description: */ -/* */ -/* */ -/******************************************************************************/ -#ifdef IP2DEBUG_TRACE -void -ip2trace (unsigned short pn, unsigned char cat, unsigned char label, unsigned long codes, ...) -{ - long flags; - unsigned long *pCode = &codes; - union ip2breadcrumb bc; - i2ChanStrPtr pCh; - - - tracebuf[tracestuff++] = jiffies; - if ( tracestuff == TRACEMAX ) { - tracestuff = 0; - } - if ( tracestuff == tracestrip ) { - if ( ++tracestrip == TRACEMAX ) { - tracestrip = 0; - } - ++tracewrap; - } - - bc.hdr.port = 0xff & pn; - bc.hdr.cat = cat; - bc.hdr.codes = (unsigned char)( codes & 0xff ); - bc.hdr.label = label; - tracebuf[tracestuff++] = bc.value; - - for (;;) { - if ( tracestuff == TRACEMAX ) { - tracestuff = 0; - } - if ( tracestuff == tracestrip ) { - if ( ++tracestrip == TRACEMAX ) { - tracestrip = 0; - } - ++tracewrap; - } - - if ( !codes-- ) - break; - - tracebuf[tracestuff++] = *++pCode; - } -} -#endif - - -MODULE_LICENSE("GPL"); -- cgit v0.10.2