From 534cc9c165017dd29ae0f4458832893dc8033c6f Mon Sep 17 00:00:00 2001 From: Anil Veerabhadrappa Date: Wed, 29 Jul 2009 21:49:48 -0700 Subject: [SCSI] bnx2i : Fix command session number jump issue seen during cable pull test Without the fix bnx2i would fail tt->xmit_task() when link is down and libiscsi would have already incremented session->cmdsn before calling bnx2i's xmit_task() entry point and will just return the command to SCSI-ML when xmit_task() fails. libiscsi does not retract the session->cmdsn as the command was never sent on wire. It is generally good idea for LLD, bnx2i to accept the scsi cmnd/nopout and let upper layer timeout and go though normal session recovery process. When link is down, unsolicited nopout will not be accepted by bnx2i and connection will never enter recovery state. This fix is required for MPIO to work corectly Signed-off-by: Anil Veerabhadrappa Signed-off-by: James Bottomley Signed-off-by: James Bottomley diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c index 98148f3..40120a2 100644 --- a/drivers/scsi/bnx2i/bnx2i_iscsi.c +++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c @@ -1160,9 +1160,6 @@ static int bnx2i_task_xmit(struct iscsi_task *task) struct bnx2i_cmd *cmd = task->dd_data; struct iscsi_cmd *hdr = (struct iscsi_cmd *) task->hdr; - if (test_bit(ADAPTER_STATE_LINK_DOWN, &hba->adapter_state)) - return -ENOTCONN; - if (!bnx2i_conn->is_bound) return -ENOTCONN; -- cgit v0.10.2