From 4185392da4b4b494e51934c51b999b4df424afba Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Mon, 6 Aug 2012 15:49:47 -0700 Subject: openvswitch: Relax set header validation. When installing a flow with an action to set a particular field we need to validate that the packets that are part of the flow actually contain that header. With IP we use zeroed addresses and with TCP/UDP the check is for zeroed ports. This check is overly broad and can catch packets like DHCP requests that have a zero source address in a legitimate header. This changes the check to look for a zeroed protocol number for IP or for both ports be zero for TCP/UDP before considering the header to not exist. Reported-by: Ethan Jackson Signed-off-by: Jesse Gross diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c index d8277d2..cf58ced 100644 --- a/net/openvswitch/datapath.c +++ b/net/openvswitch/datapath.c @@ -425,10 +425,10 @@ static int validate_sample(const struct nlattr *attr, static int validate_tp_port(const struct sw_flow_key *flow_key) { if (flow_key->eth.type == htons(ETH_P_IP)) { - if (flow_key->ipv4.tp.src && flow_key->ipv4.tp.dst) + if (flow_key->ipv4.tp.src || flow_key->ipv4.tp.dst) return 0; } else if (flow_key->eth.type == htons(ETH_P_IPV6)) { - if (flow_key->ipv6.tp.src && flow_key->ipv6.tp.dst) + if (flow_key->ipv6.tp.src || flow_key->ipv6.tp.dst) return 0; } @@ -460,7 +460,7 @@ static int validate_set(const struct nlattr *a, if (flow_key->eth.type != htons(ETH_P_IP)) return -EINVAL; - if (!flow_key->ipv4.addr.src || !flow_key->ipv4.addr.dst) + if (!flow_key->ip.proto) return -EINVAL; ipv4_key = nla_data(ovs_key); -- cgit v0.10.2 From 61a0cfb008f57ecf7eb28ee762952fb42dc15d15 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Wed, 1 Aug 2012 20:34:15 -0300 Subject: Bluetooth: Fix use-after-free bug in SMP If SMP fails, we should always cancel security_timer delayed work. Otherwise, security_timer function may run after l2cap_conn object has been freed. This patch fixes the following warning reported by ODEBUG: WARNING: at lib/debugobjects.c:261 debug_print_object+0x7c/0x8d() Hardware name: Bochs ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x27 Modules linked in: btusb bluetooth Pid: 440, comm: kworker/u:2 Not tainted 3.5.0-rc1+ #4 Call Trace: [] ? free_obj_work+0x4a/0x7f [] warn_slowpath_common+0x7e/0x97 [] warn_slowpath_fmt+0x41/0x43 [] debug_print_object+0x7c/0x8d [] ? __queue_work+0x241/0x241 [] debug_check_no_obj_freed+0x92/0x159 [] slab_free_hook+0x6f/0x77 [] ? l2cap_conn_del+0x148/0x157 [bluetooth] [] kfree+0x59/0xac [] l2cap_conn_del+0x148/0x157 [bluetooth] [] l2cap_recv_frame+0xa77/0xfa4 [bluetooth] [] ? trace_hardirqs_on_caller+0x112/0x1ad [] l2cap_recv_acldata+0xe2/0x264 [bluetooth] [] hci_rx_work+0x235/0x33c [bluetooth] [] ? process_one_work+0x126/0x2fe [] process_one_work+0x185/0x2fe [] ? process_one_work+0x126/0x2fe [] ? lock_acquired+0x1b5/0x1cf [] ? le_scan_work+0x11d/0x11d [bluetooth] [] ? spin_lock_irq+0x9/0xb [] worker_thread+0xcf/0x175 [] ? rescuer_thread+0x175/0x175 [] kthread+0x95/0x9d [] kernel_threadi_helper+0x4/0x10 [] ? retint_restore_args+0x13/0x13 [] ? flush_kthread_worker+0xdb/0xdb [] ? gs_change+0x13/0x13 This bug can be reproduced using hctool lecc or l2test tools and bluetoothd not running. Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 901a616..98ffc1b 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -267,10 +267,10 @@ static void smp_failure(struct l2cap_conn *conn, u8 reason, u8 send) mgmt_auth_failed(conn->hcon->hdev, conn->dst, hcon->type, hcon->dst_type, reason); - if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) { - cancel_delayed_work_sync(&conn->security_timer); + cancel_delayed_work_sync(&conn->security_timer); + + if (test_and_clear_bit(HCI_CONN_LE_SMP_PEND, &conn->hcon->flags)) smp_chan_destroy(conn); - } } #define JUST_WORKS 0x00 -- cgit v0.10.2 From bc21fde2d549d1cb1ebef04016eb7affa43bb5c1 Mon Sep 17 00:00:00 2001 From: Yevgeniy Melnichuk Date: Tue, 7 Aug 2012 19:48:10 +0530 Subject: Bluetooth: Add support for Sony Vaio T-Series Add Sony Vaio T-Series Bluetooth Module( 0x489:0xE036) to the blacklist of btusb module and add it to the ath3k module. output of cat /sys/kernel/debug/usb/devices T: Bus=01 Lev=02 Prnt=02 Port=01 Cnt=01 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e036 Rev= 0.02 S: Manufacturer=Atheros Communications S: Product=Bluetooth USB Host Controller S: SerialNumber=Alaska Day 2006 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Yevgeniy Melnichuk Signed-off-by: Mohammed Shafi Shajakhan Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c index 11f36e5..fc2de55 100644 --- a/drivers/bluetooth/ath3k.c +++ b/drivers/bluetooth/ath3k.c @@ -86,6 +86,7 @@ static struct usb_device_id ath3k_table[] = { /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C) }, + { USB_DEVICE(0x0489, 0xE036) }, { } /* Terminating entry */ }; @@ -109,6 +110,7 @@ static struct usb_device_id ath3k_blist_tbl[] = { /* Atheros AR5BBU22 with sflash firmware */ { USB_DEVICE(0x0489, 0xE03C), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xE036), .driver_info = BTUSB_ATH3012 }, { } /* Terminating entry */ }; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index cef3bac..2fe7776 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -141,6 +141,7 @@ static struct usb_device_id blacklist_table[] = { /* Atheros AR5BBU12 with sflash firmware */ { USB_DEVICE(0x0489, 0xe03c), .driver_info = BTUSB_ATH3012 }, + { USB_DEVICE(0x0489, 0xe036), .driver_info = BTUSB_ATH3012 }, /* Broadcom BCM2035 */ { USB_DEVICE(0x0a5c, 0x2035), .driver_info = BTUSB_WRONG_SCO_MTU }, -- cgit v0.10.2 From d4b7c5db429fbfd3c79120b27ccf66d583606b57 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 20 Aug 2012 14:51:50 +0900 Subject: sh: intc: Fix up multi-evt irq association. In the multi-evt case we were accidentally associating the parent IRQ, fix this up. Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index 32c26d7..8f32a13 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -355,7 +355,7 @@ int __init register_intc_controller(struct intc_desc *desc) if (unlikely(res)) { if (res == -EEXIST) { res = irq_domain_associate(d->domain, - irq, irq); + irq2, irq2); if (unlikely(res)) { pr_err("domain association " "failure\n"); -- cgit v0.10.2 From db8b624d55e65ad5d8211a9fef66fa7f16bd13a0 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:52 +0200 Subject: ASoC: imx-sgtl5000: fix error return code Initialize ret on the second call to imx_audmux_v2_configure_port so that the subsequent test checks that result and not the previous one. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Mark Brown diff --git a/sound/soc/fsl/imx-sgtl5000.c b/sound/soc/fsl/imx-sgtl5000.c index fb21b17..199408e 100644 --- a/sound/soc/fsl/imx-sgtl5000.c +++ b/sound/soc/fsl/imx-sgtl5000.c @@ -94,7 +94,7 @@ static int __devinit imx_sgtl5000_probe(struct platform_device *pdev) dev_err(&pdev->dev, "audmux internal port setup failed\n"); return ret; } - imx_audmux_v2_configure_port(ext_port, + ret = imx_audmux_v2_configure_port(ext_port, IMX_AUDMUX_V2_PTCR_SYN, IMX_AUDMUX_V2_PDCR_RXDSEL(int_port)); if (ret) { -- cgit v0.10.2 From b18e93a493626c1446f9788ebd5844d008bbf71c Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:02:53 +0200 Subject: ASoC: ux500_msp_i2s: better use devm functions and fix error return code Remove unnecessary calls to devm_kfree and replace iounmap by devm_iounmap (and use resource_size for the third argument). These changes make it possible to remove the error-handling code at the end of ux500_msp_i2s_init_msp, and all of the gotos become direct returns. In the case of the second call to devm_kzalloc, the return variable ret was not initialized. Here it is changed to a direct return of -ENOMEM. A simplified version of the semantic match that finds the second problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Mark Brown diff --git a/sound/soc/ux500/ux500_msp_i2s.c b/sound/soc/ux500/ux500_msp_i2s.c index 5c472f3..eb85113 100644 --- a/sound/soc/ux500/ux500_msp_i2s.c +++ b/sound/soc/ux500/ux500_msp_i2s.c @@ -663,7 +663,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, struct ux500_msp **msp_p, struct msp_i2s_platform_data *platform_data) { - int ret = 0; struct resource *res = NULL; struct i2s_controller *i2s_cont; struct ux500_msp *msp; @@ -685,15 +684,14 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, if (res == NULL) { dev_err(&pdev->dev, "%s: ERROR: Unable to get resource!\n", __func__); - ret = -ENOMEM; - goto err_res; + return -ENOMEM; } - msp->registers = ioremap(res->start, (res->end - res->start + 1)); + msp->registers = devm_ioremap(&pdev->dev, res->start, + resource_size(res)); if (msp->registers == NULL) { dev_err(&pdev->dev, "%s: ERROR: ioremap failed!\n", __func__); - ret = -ENOMEM; - goto err_res; + return -ENOMEM; } msp->msp_state = MSP_STATE_IDLE; @@ -705,7 +703,7 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, dev_err(&pdev->dev, "%s: ERROR: Failed to allocate I2S-controller!\n", __func__); - goto err_i2s_cont; + return -ENOMEM; } i2s_cont->dev.parent = &pdev->dev; i2s_cont->data = (void *)msp; @@ -716,14 +714,6 @@ int ux500_msp_i2s_init_msp(struct platform_device *pdev, msp->i2s_cont = i2s_cont; return 0; - -err_i2s_cont: - iounmap(msp->registers); - -err_res: - devm_kfree(&pdev->dev, msp); - - return ret; } void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, @@ -732,11 +722,6 @@ void ux500_msp_i2s_cleanup_msp(struct platform_device *pdev, dev_dbg(msp->dev, "%s: Enter (id = %d).\n", __func__, msp->id); device_unregister(&msp->i2s_cont->dev); - devm_kfree(&pdev->dev, msp->i2s_cont); - - iounmap(msp->registers); - - devm_kfree(&pdev->dev, msp); } MODULE_LICENSE("GPL v2"); -- cgit v0.10.2 From bc72d26bdb23c908ad52ec2d321a137d27762f08 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 19 Aug 2012 09:03:00 +0200 Subject: ASoC: am3517evm: fix error return code It was forgotten to initialize ret to the result of calling snd_soc_dai_set_sysclk, unlike at the other calls in the same function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // ( if@p1 (\(ret < 0\|ret != 0\)) { ... return ret; } | ret@p1 = 0 ) ... when != ret = e1 when != &ret *if(...) { ... when != ret = e2 when forall return ret; } // Signed-off-by: Julia Lawall Acked-by: Jarkko Nikula Signed-off-by: Mark Brown diff --git a/sound/soc/omap/am3517evm.c b/sound/soc/omap/am3517evm.c index 009533a..df65f98 100644 --- a/sound/soc/omap/am3517evm.c +++ b/sound/soc/omap/am3517evm.c @@ -59,7 +59,7 @@ static int am3517evm_hw_params(struct snd_pcm_substream *substream, return ret; } - snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0, + ret = snd_soc_dai_set_sysclk(cpu_dai, OMAP_MCBSP_FSR_SRC_FSX, 0, SND_SOC_CLOCK_IN); if (ret < 0) { printk(KERN_ERR "can't set CPU system clock OMAP_MCBSP_FSR_SRC_FSX\n"); -- cgit v0.10.2 From 92c385f46b30f4954e9dd2d2005c12d233b479ea Mon Sep 17 00:00:00 2001 From: Gustavo Padovan Date: Mon, 6 Aug 2012 15:36:49 -0300 Subject: Bluetooth: Use USB_VENDOR_AND_INTERFACE() for Broadcom devices Many Broadcom devices has a vendor specific devices class, with this rule we match all existent and future controllers with this behavior. We also remove old rules to that matches product id for Broadcom devices. Tested-by: John Hommel Signed-off-by: Gustavo Padovan diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 2fe7776..e791b20 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -94,16 +94,14 @@ static struct usb_device_id btusb_table[] = { /* Broadcom BCM20702A0 */ { USB_DEVICE(0x0489, 0xe042) }, - { USB_DEVICE(0x0a5c, 0x21e3) }, - { USB_DEVICE(0x0a5c, 0x21e6) }, - { USB_DEVICE(0x0a5c, 0x21e8) }, - { USB_DEVICE(0x0a5c, 0x21f3) }, - { USB_DEVICE(0x0a5c, 0x21f4) }, { USB_DEVICE(0x413c, 0x8197) }, /* Foxconn - Hon Hai */ { USB_DEVICE(0x0489, 0xe033) }, + /*Broadcom devices with vendor specific id */ + { USB_VENDOR_AND_INTERFACE_INFO(0x0a5c, 0xff, 0x01, 0x01) }, + { } /* Terminating entry */ }; -- cgit v0.10.2 From 338b131a3269881c7431234855c93c219b0979b6 Mon Sep 17 00:00:00 2001 From: "sreekanth.reddy@lsi.com" Date: Tue, 17 Jul 2012 15:57:05 +0530 Subject: [SCSI] mpt2sas: Fix for Driver oops, when loading driver with max_queue_depth command line option to a very small value If the specified max_queue_depth setting is less than the expected number of internal commands, then driver will calculate the queue depth size to a negitive number. This negitive number is actually a very large number because variable is unsigned 16bit integer. So, the driver will ask for a very large amount of memory for message frames and resulting into oops as memory allocation routines will not able to handle such a large request. So, in order to limit this kind of oops, The driver need to set the max_queue_depth to a scsi mid layer's can_queue value. Then the overall message frames required for IO is minimum of either (max_queue_depth plus internal commands) or the IOC global credits. Signed-off-by: Sreekanth Reddy Cc: Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index 9d46fcb..b25757d 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -2424,10 +2424,13 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) } /* command line tunables for max controller queue depth */ - if (max_queue_depth != -1) - max_request_credit = (max_queue_depth < facts->RequestCredit) - ? max_queue_depth : facts->RequestCredit; - else + if (max_queue_depth != -1 && max_queue_depth != 0) { + max_request_credit = min_t(u16, max_queue_depth + + ioc->hi_priority_depth + ioc->internal_depth, + facts->RequestCredit); + if (max_request_credit > MAX_HBA_QUEUE_DEPTH) + max_request_credit = MAX_HBA_QUEUE_DEPTH; + } else max_request_credit = min_t(u16, facts->RequestCredit, MAX_HBA_QUEUE_DEPTH); @@ -2502,7 +2505,7 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc, int sleep_flag) /* set the scsi host can_queue depth * with some internal commands that could be outstanding */ - ioc->shost->can_queue = ioc->scsiio_depth - (2); + ioc->shost->can_queue = ioc->scsiio_depth; dinitprintk(ioc, printk(MPT2SAS_INFO_FMT "scsi host: " "can_queue depth (%d)\n", ioc->name, ioc->shost->can_queue)); -- cgit v0.10.2 From bd8d6dd43a77bfd2b8fef5b094b9d6095e169dee Mon Sep 17 00:00:00 2001 From: Kashyap Desai Date: Tue, 17 Jul 2012 18:20:44 -0700 Subject: [SCSI] megaraid_sas: Move poll_aen_lock initializer The following patch moves the poll_aen_lock initializer from megasas_probe_one() to megasas_init(). This prevents a crash when a user loads the driver and tries to issue a poll() system call on the ioctl interface with no adapters present. Signed-off-by: Kashyap Desai Signed-off-by: Adam Radford Cc: Signed-off-by: James Bottomley diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index dc27598..ed38454 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -4066,7 +4066,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) spin_lock_init(&instance->cmd_pool_lock); spin_lock_init(&instance->hba_lock); spin_lock_init(&instance->completion_lock); - spin_lock_init(&poll_aen_lock); mutex_init(&instance->aen_mutex); mutex_init(&instance->reset_mutex); @@ -5392,6 +5391,8 @@ static int __init megasas_init(void) printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION, MEGASAS_EXT_VERSION); + spin_lock_init(&poll_aen_lock); + support_poll_for_event = 2; support_device_change = 1; -- cgit v0.10.2 From 27c419739b67decced4650440829b8d51bef954b Mon Sep 17 00:00:00 2001 From: Mike Snitzer Date: Thu, 31 May 2012 15:05:33 -0400 Subject: [SCSI] scsi_lib: fix scsi_io_completion's SG_IO error propagation The following v3.4-rc1 commit unmasked an existing bug in scsi_io_completion's SG_IO error handling: 47ac56d [SCSI] scsi_error: classify some ILLEGAL_REQUEST sense as a permanent TARGET_ERROR Given that certain ILLEGAL_REQUEST are now properly categorized as TARGET_ERROR the host_byte is being set (before host_byte wasn't ever set for these ILLEGAL_REQUEST). In scsi_io_completion, initialize req->errors with cmd->result _after_ the SG_IO block that calls __scsi_error_from_host_byte (which may modify the host_byte). Before this fix: cdb to send: 12 01 01 00 00 00 ioctl(3, SG_IO, {'S', SG_DXFER_NONE, cmd[6]=[12, 01, 01, 00, 00, 00], mx_sb_len=32, iovec_count=0, dxfer_len=0, timeout=20000, flags=0, status=02, masked_status=01, sb[19]=[70, 00, 05, 00, 00, 00, 00, 0b, 00, 00, 00, 00, 24, 00, 00, 00, 00, 00, 00], host_status=0x10, driver_status=0x8, resid=0, duration=0, info=0x1}) = 0 SCSI Status: Check Condition Sense Information: sense buffer empty After: cdb to send: 12 01 01 00 00 00 ioctl(3, SG_IO, {'S', SG_DXFER_NONE, cmd[6]=[12, 01, 01, 00, 00, 00], mx_sb_len=32, iovec_count=0, dxfer_len=0, timeout=20000, flags=0, status=02, masked_status=01, sb[19]=[70, 00, 05, 00, 00, 00, 00, 0b, 00, 00, 00, 00, 24, 00, 00, 00, 00, 00, 00], host_status=0, driver_status=0x8, resid=0, duration=0, info=0x1}) = 0 SCSI Status: Check Condition Sense Information: Fixed format, current; Sense key: Illegal Request Additional sense: Invalid field in cdb Raw sense data (in hex): 70 00 05 00 00 00 00 0b 00 00 00 00 24 00 00 00 00 00 00 Reported-by: Paolo Bonzini Tested-by: Paolo Bonzini Signed-off-by: Mike Snitzer Reviewed-by: Babu Moger Cc: stable@vger.kernel.org # 3.4 Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index ffd7773..faa790f 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -776,7 +776,6 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) } if (req->cmd_type == REQ_TYPE_BLOCK_PC) { /* SG_IO ioctl from block level */ - req->errors = result; if (result) { if (sense_valid && req->sense) { /* @@ -792,6 +791,10 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes) if (!sense_deferred) error = __scsi_error_from_host_byte(cmd, result); } + /* + * __scsi_error_from_host_byte may have reset the host_byte + */ + req->errors = cmd->result; req->resid_len = scsi_get_resid(cmd); -- cgit v0.10.2 From 14216561e164671ce147458653b1fea06a4ada1e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Wed, 25 Jul 2012 23:55:55 +0400 Subject: [SCSI] Fix 'Device not ready' issue on mpt2sas This is a particularly nasty SCSI ATA Translation Layer (SATL) problem. SAT-2 says (section 8.12.2) if the device is in the stopped state as the result of processing a START STOP UNIT command (see 9.11), then the SATL shall terminate the TEST UNIT READY command with CHECK CONDITION status with the sense key set to NOT READY and the additional sense code of LOGICAL UNIT NOT READY, INITIALIZING COMMAND REQUIRED; mpt2sas internal SATL seems to implement this. The result is very confusing standby behaviour (using hdparm -y). If you suspend a drive and then send another command, usually it wakes up. However, if the next command is a TEST UNIT READY, the SATL sees that the drive is suspended and proceeds to follow the SATL rules for this, returning NOT READY to all subsequent commands. This means that the ordering of TEST UNIT READY is crucial: if you send TUR and then a command, you get a NOT READY to both back. If you send a command and then a TUR, you get GOOD status because the preceeding command woke the drive. This bit us badly because commit 85ef06d1d252f6a2e73b678591ab71caad4667bb Author: Tejun Heo Date: Fri Jul 1 16:17:47 2011 +0200 block: flush MEDIA_CHANGE from drivers on close(2) Changed our ordering on TEST UNIT READY commands meaning that SATA drives connected to an mpt2sas now suspend and refuse to wake (because the mpt2sas SATL sees the suspend *before* the drives get awoken by the next ATA command) resulting in lots of failed commands. The standard is completely nuts forcing this inconsistent behaviour, but we have to work around it. The fix for this is twofold: 1. Set the allow_restart flag so we wake the drive when we see it has been suspended 2. Return all TEST UNIT READY status directly to the mid layer without any further error handling which prevents us causing error handling which may offline the device just because of a media check TUR. Reported-by: Matthias Prager Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index 4a6381c..de2337f 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -42,6 +42,8 @@ #include +static void scsi_eh_done(struct scsi_cmnd *scmd); + #define SENSE_TIMEOUT (10*HZ) /* @@ -241,6 +243,14 @@ static int scsi_check_sense(struct scsi_cmnd *scmd) if (! scsi_command_normalize_sense(scmd, &sshdr)) return FAILED; /* no valid sense data */ + if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done) + /* + * nasty: for mid-layer issued TURs, we need to return the + * actual sense data without any recovery attempt. For eh + * issued ones, we need to try to recover and interpret + */ + return SUCCESS; + if (scsi_sense_is_deferred(&sshdr)) return NEEDS_RETRY; diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c index 56a9379..d947ffc 100644 --- a/drivers/scsi/scsi_scan.c +++ b/drivers/scsi/scsi_scan.c @@ -764,6 +764,16 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result, sdev->model = (char *) (sdev->inquiry + 16); sdev->rev = (char *) (sdev->inquiry + 32); + if (strncmp(sdev->vendor, "ATA ", 8) == 0) { + /* + * sata emulation layer device. This is a hack to work around + * the SATL power management specifications which state that + * when the SATL detects the device has gone into standby + * mode, it shall respond with NOT READY. + */ + sdev->allow_restart = 1; + } + if (*bflags & BLIST_ISROM) { sdev->type = TYPE_ROM; sdev->removable = 1; -- cgit v0.10.2 From 1922b0f2758badc0b971d1ebbd300bc6635a6aef Mon Sep 17 00:00:00 2001 From: AnilKumar Ch Date: Mon, 13 Aug 2012 20:36:05 +0530 Subject: mfd: Move tps65217 regulator plat data handling to regulator Regulator platform data handling was mistakenly added to MFD driver. So we will see build errors if we compile MFD drivers without CONFIG_REGULATOR. This patch moves regulator platform data handling from TPS65217 MFD driver to regulator driver. This makes MFD driver independent of REGULATOR framework so build error is fixed if CONFIG_REGULATOR is not set. drivers/built-in.o: In function `tps65217_probe': tps65217.c:(.devinit.text+0x13e37): undefined reference to `of_regulator_match' This patch also fix allocation size of tps65217 platform data. Current implementation allocates a struct tps65217_board for each regulator specified in the device tree. But the structure itself provides array of regulators so one instance of it is sufficient. Signed-off-by: AnilKumar Ch diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 61c097a..3bc2744 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -24,11 +24,18 @@ #include #include #include -#include +#include +#include #include #include +static struct mfd_cell tps65217s[] = { + { + .name = "tps65217-pmic", + }, +}; + /** * tps65217_reg_read: Read a single tps65217 register. * @@ -133,83 +140,48 @@ int tps65217_clear_bits(struct tps65217 *tps, unsigned int reg, } EXPORT_SYMBOL_GPL(tps65217_clear_bits); -#ifdef CONFIG_OF -static struct of_regulator_match reg_matches[] = { - { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 }, - { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 }, - { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 }, - { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 }, - { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 }, - { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 }, - { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 }, -}; - -static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) -{ - struct device_node *node = client->dev.of_node; - struct tps65217_board *pdata; - struct device_node *regs; - int count = ARRAY_SIZE(reg_matches); - int ret, i; - - regs = of_find_node_by_name(node, "regulators"); - if (!regs) - return NULL; - - ret = of_regulator_match(&client->dev, regs, reg_matches, count); - of_node_put(regs); - if ((ret < 0) || (ret > count)) - return NULL; - - count = ret; - pdata = devm_kzalloc(&client->dev, count * sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return NULL; - - for (i = 0; i < count; i++) { - if (!reg_matches[i].init_data || !reg_matches[i].of_node) - continue; - - pdata->tps65217_init_data[i] = reg_matches[i].init_data; - pdata->of_node[i] = reg_matches[i].of_node; - } - - return pdata; -} - -static struct of_device_id tps65217_of_match[] = { - { .compatible = "ti,tps65217", }, - { }, -}; -#else -static struct tps65217_board *tps65217_parse_dt(struct i2c_client *client) -{ - return NULL; -} -#endif - static struct regmap_config tps65217_regmap_config = { .reg_bits = 8, .val_bits = 8, }; +static const struct of_device_id tps65217_of_match[] = { + { .compatible = "ti,tps65217", .data = (void *)TPS65217 }, + { /* sentinel */ }, +}; + static int __devinit tps65217_probe(struct i2c_client *client, const struct i2c_device_id *ids) { struct tps65217 *tps; - struct regulator_init_data *reg_data; - struct tps65217_board *pdata = client->dev.platform_data; - int i, ret; unsigned int version; + unsigned int chip_id = ids->driver_data; + const struct of_device_id *match; + int ret; - if (!pdata && client->dev.of_node) - pdata = tps65217_parse_dt(client); + if (client->dev.of_node) { + match = of_match_device(tps65217_of_match, &client->dev); + if (!match) { + dev_err(&client->dev, + "Failed to find matching dt id\n"); + return -EINVAL; + } + chip_id = (unsigned int)match->data; + } + + if (!chip_id) { + dev_err(&client->dev, "id is null.\n"); + return -ENODEV; + } tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL); if (!tps) return -ENOMEM; - tps->pdata = pdata; + i2c_set_clientdata(client, tps); + tps->dev = &client->dev; + tps->id = chip_id; + tps->regmap = devm_regmap_init_i2c(client, &tps65217_regmap_config); if (IS_ERR(tps->regmap)) { ret = PTR_ERR(tps->regmap); @@ -218,8 +190,12 @@ static int __devinit tps65217_probe(struct i2c_client *client, return ret; } - i2c_set_clientdata(client, tps); - tps->dev = &client->dev; + ret = mfd_add_devices(tps->dev, -1, tps65217s, + ARRAY_SIZE(tps65217s), NULL, 0); + if (ret < 0) { + dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret); + return ret; + } ret = tps65217_reg_read(tps, TPS65217_REG_CHIPID, &version); if (ret < 0) { @@ -232,41 +208,21 @@ static int __devinit tps65217_probe(struct i2c_client *client, (version & TPS65217_CHIPID_CHIP_MASK) >> 4, version & TPS65217_CHIPID_REV_MASK); - for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { - struct platform_device *pdev; - - pdev = platform_device_alloc("tps65217-pmic", i); - if (!pdev) { - dev_err(tps->dev, "Cannot create regulator %d\n", i); - continue; - } - - pdev->dev.parent = tps->dev; - pdev->dev.of_node = pdata->of_node[i]; - reg_data = pdata->tps65217_init_data[i]; - platform_device_add_data(pdev, reg_data, sizeof(*reg_data)); - tps->regulator_pdev[i] = pdev; - - platform_device_add(pdev); - } - return 0; } static int __devexit tps65217_remove(struct i2c_client *client) { struct tps65217 *tps = i2c_get_clientdata(client); - int i; - for (i = 0; i < TPS65217_NUM_REGULATOR; i++) - platform_device_unregister(tps->regulator_pdev[i]); + mfd_remove_devices(tps->dev); return 0; } static const struct i2c_device_id tps65217_id_table[] = { - {"tps65217", 0xF0}, - {/* end of list */} + {"tps65217", TPS65217}, + { /* sentinel */ } }; MODULE_DEVICE_TABLE(i2c, tps65217_id_table); diff --git a/drivers/regulator/tps65217-regulator.c b/drivers/regulator/tps65217-regulator.c index 6caa222..ab00cab 100644 --- a/drivers/regulator/tps65217-regulator.c +++ b/drivers/regulator/tps65217-regulator.c @@ -22,6 +22,7 @@ #include #include +#include #include #include #include @@ -281,37 +282,130 @@ static const struct regulator_desc regulators[] = { NULL), }; +#ifdef CONFIG_OF +static struct of_regulator_match reg_matches[] = { + { .name = "dcdc1", .driver_data = (void *)TPS65217_DCDC_1 }, + { .name = "dcdc2", .driver_data = (void *)TPS65217_DCDC_2 }, + { .name = "dcdc3", .driver_data = (void *)TPS65217_DCDC_3 }, + { .name = "ldo1", .driver_data = (void *)TPS65217_LDO_1 }, + { .name = "ldo2", .driver_data = (void *)TPS65217_LDO_2 }, + { .name = "ldo3", .driver_data = (void *)TPS65217_LDO_3 }, + { .name = "ldo4", .driver_data = (void *)TPS65217_LDO_4 }, +}; + +static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev) +{ + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct device_node *node = tps->dev->of_node; + struct tps65217_board *pdata; + struct device_node *regs; + int i, count; + + regs = of_find_node_by_name(node, "regulators"); + if (!regs) + return NULL; + + count = of_regulator_match(pdev->dev.parent, regs, + reg_matches, TPS65217_NUM_REGULATOR); + of_node_put(regs); + if ((count < 0) || (count > TPS65217_NUM_REGULATOR)) + return NULL; + + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return NULL; + + for (i = 0; i < count; i++) { + if (!reg_matches[i].init_data || !reg_matches[i].of_node) + continue; + + pdata->tps65217_init_data[i] = reg_matches[i].init_data; + pdata->of_node[i] = reg_matches[i].of_node; + } + + return pdata; +} +#else +static struct tps65217_board *tps65217_parse_dt(struct platform_device *pdev) +{ + return NULL; +} +#endif + static int __devinit tps65217_regulator_probe(struct platform_device *pdev) { + struct tps65217 *tps = dev_get_drvdata(pdev->dev.parent); + struct tps65217_board *pdata = dev_get_platdata(tps->dev); + struct regulator_init_data *reg_data; struct regulator_dev *rdev; - struct tps65217 *tps; - struct tps_info *info = &tps65217_pmic_regs[pdev->id]; struct regulator_config config = { }; + int i, ret; - /* Already set by core driver */ - tps = dev_to_tps65217(pdev->dev.parent); - tps->info[pdev->id] = info; + if (tps->dev->of_node) + pdata = tps65217_parse_dt(pdev); - config.dev = &pdev->dev; - config.of_node = pdev->dev.of_node; - config.init_data = pdev->dev.platform_data; - config.driver_data = tps; + if (!pdata) { + dev_err(&pdev->dev, "Platform data not found\n"); + return -EINVAL; + } - rdev = regulator_register(®ulators[pdev->id], &config); - if (IS_ERR(rdev)) - return PTR_ERR(rdev); + if (tps65217_chip_id(tps) != TPS65217) { + dev_err(&pdev->dev, "Invalid tps chip version\n"); + return -ENODEV; + } - platform_set_drvdata(pdev, rdev); + platform_set_drvdata(pdev, tps); + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) { + + reg_data = pdata->tps65217_init_data[i]; + + /* + * Regulator API handles empty constraints but not NULL + * constraints + */ + if (!reg_data) + continue; + + /* Register the regulators */ + tps->info[i] = &tps65217_pmic_regs[i]; + + config.dev = tps->dev; + config.init_data = reg_data; + config.driver_data = tps; + config.regmap = tps->regmap; + if (tps->dev->of_node) + config.of_node = pdata->of_node[i]; + + rdev = regulator_register(®ulators[i], &config); + if (IS_ERR(rdev)) { + dev_err(tps->dev, "failed to register %s regulator\n", + pdev->name); + ret = PTR_ERR(rdev); + goto err_unregister_regulator; + } + + /* Save regulator for cleanup */ + tps->rdev[i] = rdev; + } return 0; + +err_unregister_regulator: + while (--i >= 0) + regulator_unregister(tps->rdev[i]); + + return ret; } static int __devexit tps65217_regulator_remove(struct platform_device *pdev) { - struct regulator_dev *rdev = platform_get_drvdata(pdev); + struct tps65217 *tps = platform_get_drvdata(pdev); + unsigned int i; + + for (i = 0; i < TPS65217_NUM_REGULATOR; i++) + regulator_unregister(tps->rdev[i]); platform_set_drvdata(pdev, NULL); - regulator_unregister(rdev); return 0; } diff --git a/include/linux/mfd/tps65217.h b/include/linux/mfd/tps65217.h index 12c0687..7cd83d8 100644 --- a/include/linux/mfd/tps65217.h +++ b/include/linux/mfd/tps65217.h @@ -22,6 +22,9 @@ #include #include +/* TPS chip id list */ +#define TPS65217 0xF0 + /* I2C ID for TPS65217 part */ #define TPS65217_I2C_ID 0x24 @@ -248,13 +251,11 @@ struct tps_info { struct tps65217 { struct device *dev; struct tps65217_board *pdata; + unsigned int id; struct regulator_desc desc[TPS65217_NUM_REGULATOR]; struct regulator_dev *rdev[TPS65217_NUM_REGULATOR]; struct tps_info *info[TPS65217_NUM_REGULATOR]; struct regmap *regmap; - - /* Client devices */ - struct platform_device *regulator_pdev[TPS65217_NUM_REGULATOR]; }; static inline struct tps65217 *dev_to_tps65217(struct device *dev) @@ -262,6 +263,11 @@ static inline struct tps65217 *dev_to_tps65217(struct device *dev) return dev_get_drvdata(dev); } +static inline int tps65217_chip_id(struct tps65217 *tps65217) +{ + return tps65217->id; +} + int tps65217_reg_read(struct tps65217 *tps, unsigned int reg, unsigned int *val); int tps65217_reg_write(struct tps65217 *tps, unsigned int reg, -- cgit v0.10.2 From a0e35322910555e20e9eced3f050a76c7b3a1f92 Mon Sep 17 00:00:00 2001 From: Feng Tang Date: Thu, 16 Aug 2012 15:50:10 +0800 Subject: mfd: lpc_ich: Fix a 3.5 kernel regression for iTCO_wdt driver There are many reports (including 2 of my machines) that iTCO_wdt watchdog driver fails to be initialized in 3.5 kernel with error message like: [ 5.265175] ACPI Warning: 0x00001060-0x0000107f SystemIO conflicts with Region \_SB_.PCI0.LPCB.TCOI 1 (20120320/utaddress-251) [ 5.265192] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 5.265206] lpc_ich: Resource conflict(s) found affecting iTCO_wdt The root cause the iTCO_wdt driver in 3.4 probes the HW IO resource from LPC's PCI config space, while in 3.5 kernel it relies on lpc_ich driver for the probe, which adds a new acpi_check_resource_conflict() check, and give up the probe if there is any conflict with ACPI. Fix it by removing all the checks for iTCO_wdt to keep the same behavior as 3.4 kernel. https://bugzilla.kernel.org/show_bug.cgi?id=44991 Actually the same check could be removed for the gpio-ich in lpc_ich.c, but I'm not sure if it will cause problems. Signed-off-by: Feng Tang Cc: Aaron Sierra Cc: Wim Van Sebroeck Cc: Len Brown Cc: Bob Moore Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index 027cc8f..a05fdfc 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -765,7 +765,6 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, u32 base_addr_cfg; u32 base_addr; int ret; - bool acpi_conflict = false; struct resource *res; /* Setup power management base register */ @@ -780,20 +779,11 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, res = wdt_io_res(ICH_RES_IO_TCO); res->start = base_addr + ACPIBASE_TCO_OFF; res->end = base_addr + ACPIBASE_TCO_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } res = wdt_io_res(ICH_RES_IO_SMI); res->start = base_addr + ACPIBASE_SMI_OFF; res->end = base_addr + ACPIBASE_SMI_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } + lpc_ich_enable_acpi_space(dev); /* @@ -813,11 +803,6 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, res = wdt_mem_res(ICH_RES_MEM_GCS); res->start = base_addr + ACPIBASE_GCS_OFF; res->end = base_addr + ACPIBASE_GCS_END; - ret = acpi_check_resource_conflict(res); - if (ret) { - acpi_conflict = true; - goto wdt_done; - } } lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id); @@ -825,9 +810,6 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, 1, NULL, 0); wdt_done: - if (acpi_conflict) - pr_warn("Resource conflict(s) found affecting %s\n", - lpc_ich_cells[LPC_WDT].name); return ret; } -- cgit v0.10.2 From 4c054ba63ad47ef244cfcfa1cea38134620a5bae Mon Sep 17 00:00:00 2001 From: Nicholas Bellinger Date: Thu, 16 Aug 2012 15:33:10 -0700 Subject: target: Fix ->data_length re-assignment bug with SCSI overflow This patch fixes a long-standing bug with SCSI overflow handling where se_cmd->data_length was incorrectly being re-assigned to the larger CDB extracted allocation length, resulting in a number of fabric level errors that would end up causing a session reset in most cases. So instead now: - Only re-assign se_cmd->data_length durining UNDERFLOW (to use the smaller value) - Use existing se_cmd->data_length for OVERFLOW (to use the smaller value) This fix has been tested with the following CDB to generate an SCSI overflow: sg_raw -r512 /dev/sdc 28 0 0 0 0 0 0 0 9 0 Tested using iscsi-target, tcm_qla2xxx, loopback and tcm_vhost fabric ports. Here is a bit more detail on each case: - iscsi-target: Bug with open-iscsi with overflow, sg_raw returns -3584 bytes of data. - tcm_qla2xxx: Working as expected, returnins 512 bytes of data - loopback: sg_raw returns CHECK_CONDITION, from overflow rejection in transport_generic_map_mem_to_cmd() - tcm_vhost: Same as loopback Reported-by: Roland Dreier Cc: Roland Dreier Cc: Christoph Hellwig Cc: Boaz Harrosh Cc: Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4de3186..3425098 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1181,15 +1181,20 @@ int target_cmd_size_check(struct se_cmd *cmd, unsigned int size) /* Returns CHECK_CONDITION + INVALID_CDB_FIELD */ goto out_invalid_cdb_field; } - + /* + * For the overflow case keep the existing fabric provided + * ->data_length. Otherwise for the underflow case, reset + * ->data_length to the smaller SCSI expected data transfer + * length. + */ if (size > cmd->data_length) { cmd->se_cmd_flags |= SCF_OVERFLOW_BIT; cmd->residual_count = (size - cmd->data_length); } else { cmd->se_cmd_flags |= SCF_UNDERFLOW_BIT; cmd->residual_count = (cmd->data_length - size); + cmd->data_length = size; } - cmd->data_length = size; } return 0; -- cgit v0.10.2 From a849088aa1552b1a28eea3daff599ee22a734ae3 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 25 Aug 2012 09:03:15 +0100 Subject: ARM: Fix ioremap() of address zero Murali Nalajala reports a regression that ioremapping address zero results in an oops dump: Unable to handle kernel paging request at virtual address fa200000 pgd = d4f80000 [fa200000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP ARM Modules linked in: CPU: 0 Tainted: G W (3.4.0-g3b5f728-00009-g638207a #13) PC is at msm_pm_config_rst_vector_before_pc+0x8/0x30 LR is at msm_pm_boot_config_before_pc+0x18/0x20 pc : [] lr : [] psr: a0000093 sp : c0837ef0 ip : cfe00000 fp : 0000000d r10: da7efc17 r9 : 225c4278 r8 : 00000006 r7 : 0003c000 r6 : c085c824 r5 : 00000001 r4 : fa101000 r3 : fa200000 r2 : c095080c r1 : 002250fc r0 : 00000000 Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c5387d Table: 25180059 DAC: 00000015 [] (msm_pm_config_rst_vector_before_pc+0x8/0x30) from [] (msm_pm_boot_config_before_pc+0x18/0x20) [] (msm_pm_boot_config_before_pc+0x18/0x20) from [] (msm_pm_power_collapse+0x410/0xb04) [] (msm_pm_power_collapse+0x410/0xb04) from [] (arch_idle+0x294/0x3e0) [] (arch_idle+0x294/0x3e0) from [] (default_idle+0x18/0x2c) [] (default_idle+0x18/0x2c) from [] (cpu_idle+0x90/0xe4) [] (cpu_idle+0x90/0xe4) from [] (rest_init+0x88/0xa0) [] (rest_init+0x88/0xa0) from [] (start_kernel+0x3a8/0x40c) Code: c0704256 e12fff1e e59f2020 e5923000 (e5930000) This is caused by the 'reserved' entries which we insert (see 19b52abe3c5d7 - ARM: 7438/1: fill possible PMD empty section gaps) which get matched for physical address zero. Resolve this by marking these reserved entries with a different flag. Cc: Tested-by: Murali Nalajala Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/mm.h b/arch/arm/mm/mm.h index 6776160..a8ee92d 100644 --- a/arch/arm/mm/mm.h +++ b/arch/arm/mm/mm.h @@ -55,6 +55,9 @@ extern void __flush_dcache_page(struct address_space *mapping, struct page *page /* permanent static mappings from iotable_init() */ #define VM_ARM_STATIC_MAPPING 0x40000000 +/* empty mapping */ +#define VM_ARM_EMPTY_MAPPING 0x20000000 + /* mapping type (attributes) for permanent static mappings */ #define VM_ARM_MTYPE(mt) ((mt) << 20) #define VM_ARM_MTYPE_MASK (0x1f << 20) diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 4c2d045..eab94bc 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -807,7 +807,7 @@ static void __init pmd_empty_section_gap(unsigned long addr) vm = early_alloc_aligned(sizeof(*vm), __alignof__(*vm)); vm->addr = (void *)addr; vm->size = SECTION_SIZE; - vm->flags = VM_IOREMAP | VM_ARM_STATIC_MAPPING; + vm->flags = VM_IOREMAP | VM_ARM_EMPTY_MAPPING; vm->caller = pmd_empty_section_gap; vm_area_add_early(vm); } @@ -820,7 +820,7 @@ static void __init fill_pmd_gaps(void) /* we're still single threaded hence no lock needed here */ for (vm = vmlist; vm; vm = vm->next) { - if (!(vm->flags & VM_ARM_STATIC_MAPPING)) + if (!(vm->flags & (VM_ARM_STATIC_MAPPING | VM_ARM_EMPTY_MAPPING))) continue; addr = (unsigned long)vm->addr; if (addr < next) -- cgit v0.10.2 From bf8801145c01ab600f8df66e8c879ac642fa5846 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 18:55:44 +0100 Subject: ARM: 7496/1: hw_breakpoint: don't rely on dfsr to show watchpoint access type From ARM debug architecture v7.1 onwards, a watchpoint exception causes the DFAR to be updated with the faulting data address. However, DFSR.WnR takes an UNKNOWN value and therefore cannot be used in general to determine the access type that triggered the watchpoint. This patch forbids watchpoints without an overflow handler from specifying a specific access type (load/store). Those with overflow handlers must be able to handle false positives potentially triggered by a watchpoint of a different access type on the same address. For SIGTRAP-based handlers (i.e. ptrace), this should have no impact. Cc: Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index ba386bd..18d39ea 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -159,6 +159,12 @@ static int debug_arch_supported(void) arch >= ARM_DEBUG_ARCH_V7_1; } +/* Can we determine the watchpoint access type from the fsr? */ +static int debug_exception_updates_fsr(void) +{ + return 0; +} + /* Determine number of WRP registers available. */ static int get_num_wrp_resources(void) { @@ -619,18 +625,35 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) info->address &= ~alignment_mask; info->ctrl.len <<= offset; - /* - * Currently we rely on an overflow handler to take - * care of single-stepping the breakpoint when it fires. - * In the case of userspace breakpoints on a core with V7 debug, - * we can use the mismatch feature as a poor-man's hardware - * single-step, but this only works for per-task breakpoints. - */ - if (!bp->overflow_handler && (arch_check_bp_in_kernelspace(bp) || - !core_has_mismatch_brps() || !bp->hw.bp_target)) { - pr_warning("overflow handler required but none found\n"); - ret = -EINVAL; + if (!bp->overflow_handler) { + /* + * Mismatch breakpoints are required for single-stepping + * breakpoints. + */ + if (!core_has_mismatch_brps()) + return -EINVAL; + + /* We don't allow mismatch breakpoints in kernel space. */ + if (arch_check_bp_in_kernelspace(bp)) + return -EPERM; + + /* + * Per-cpu breakpoints are not supported by our stepping + * mechanism. + */ + if (!bp->hw.bp_target) + return -EINVAL; + + /* + * We only support specific access types if the fsr + * reports them. + */ + if (!debug_exception_updates_fsr() && + (info->ctrl.type == ARM_BREAKPOINT_LOAD || + info->ctrl.type == ARM_BREAKPOINT_STORE)) + return -EINVAL; } + out: return ret; } @@ -706,10 +729,12 @@ static void watchpoint_handler(unsigned long addr, unsigned int fsr, goto unlock; /* Check that the access type matches. */ - access = (fsr & ARM_FSR_ACCESS_MASK) ? HW_BREAKPOINT_W : - HW_BREAKPOINT_R; - if (!(access & hw_breakpoint_type(wp))) - goto unlock; + if (debug_exception_updates_fsr()) { + access = (fsr & ARM_FSR_ACCESS_MASK) ? + HW_BREAKPOINT_W : HW_BREAKPOINT_R; + if (!(access & hw_breakpoint_type(wp))) + goto unlock; + } /* We have a winner. */ info->trigger = addr; -- cgit v0.10.2 From d968d2b801d877601d54e35e6dd0f52d9c797c99 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Thu, 16 Aug 2012 19:02:12 +0100 Subject: ARM: 7497/1: hw_breakpoint: allow single-byte watchpoints on all addresses Breakpoint validation currently fails for single-byte watchpoints on addresses ending in 11b. There is no reason to forbid such a watchpoint, so extend the validation code to allow it. Cc: Ulrich Weigand Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c index 18d39ea..281bf33 100644 --- a/arch/arm/kernel/hw_breakpoint.c +++ b/arch/arm/kernel/hw_breakpoint.c @@ -610,13 +610,14 @@ int arch_validate_hwbkpt_settings(struct perf_event *bp) /* Aligned */ break; case 1: - /* Allow single byte watchpoint. */ - if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) - break; case 2: /* Allow halfword watchpoints and breakpoints. */ if (info->ctrl.len == ARM_BREAKPOINT_LEN_2) break; + case 3: + /* Allow single byte watchpoint. */ + if (info->ctrl.len == ARM_BREAKPOINT_LEN_1) + break; default: ret = -EINVAL; goto out; -- cgit v0.10.2 From dbece45894d3ab1baac15a96dc4e1e8e23f64a93 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:20:59 +0100 Subject: ARM: 7501/1: decompressor: reset ttbcr for VMSA ARMv7 cores When enabling the MMU for ARMv7 CPUs, the decompressor does not touch the ttbcr register, assuming that it will be zeroed (N == 0, EAE == 0). Given that only EAE is defined as 0 for non-secure copies of the register (and a bootloader such as kexec may leave it set to 1 anyway), we should ensure that we reset the register ourselves before turning on the MMU. This patch zeroes TTBCR.EAE and TTBCR.N prior to enabling the MMU for ARMv7 cores in the decompressor, configuring us exclusively for 32-bit translation tables via TTBR0. Cc: Acked-by: Nicolas Pitre Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index b8c64b8..81769c1 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -659,10 +659,14 @@ __armv7_mmu_cache_on: #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables #endif + mrcne p15, 0, r6, c2, c0, 2 @ read ttb control reg orrne r0, r0, #1 @ MMU enabled movne r1, #0xfffffffd @ domain 0 = client + bic r6, r6, #1 << 31 @ 32-bit translation system + bic r6, r6, #3 << 0 @ use only ttbr0 mcrne p15, 0, r3, c2, c0, 0 @ load page table pointer mcrne p15, 0, r1, c3, c0, 0 @ load domain access control + mcrne p15, 0, r6, c2, c0, 2 @ load ttb control #endif mcr p15, 0, r0, c7, c5, 4 @ ISB mcr p15, 0, r0, c1, c0, 0 @ load control register -- cgit v0.10.2 From ae3790b8a916429be5fa61da95992929e6b34d64 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:21:52 +0100 Subject: ARM: 7502/1: contextidr: avoid using bfi instruction during notifier The bfi instruction is not available on ARMv6, so instead use an and/orr sequence in the contextidr_notifier. This gets rid of the assembler error: Assembler messages: Error: selected processor does not support ARM mode `bfi r3,r2,#0,#8' Reported-by: Arnd Bergmann Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/mm/context.c b/arch/arm/mm/context.c index 119bc52..4e07eec 100644 --- a/arch/arm/mm/context.c +++ b/arch/arm/mm/context.c @@ -63,10 +63,11 @@ static int contextidr_notifier(struct notifier_block *unused, unsigned long cmd, pid = task_pid_nr(thread->task) << ASID_BITS; asm volatile( " mrc p15, 0, %0, c13, c0, 1\n" - " bfi %1, %0, #0, %2\n" - " mcr p15, 0, %1, c13, c0, 1\n" + " and %0, %0, %2\n" + " orr %0, %0, %1\n" + " mcr p15, 0, %0, c13, c0, 1\n" : "=r" (contextidr), "+r" (pid) - : "I" (ASID_BITS)); + : "I" (~ASID_MASK)); isb(); return NOTIFY_OK; -- cgit v0.10.2 From df547e08e800275a431e560a7f0a6b6f24ab2904 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 24 Aug 2012 15:23:06 +0100 Subject: ARM: 7503/1: mm: only flush both pmd entries for classic MMU LPAE does not use two pmd entries for a pte, so the additional tlb flushing is not required. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h index 314d466..99a1951 100644 --- a/arch/arm/include/asm/tlb.h +++ b/arch/arm/include/asm/tlb.h @@ -199,6 +199,9 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, { pgtable_page_dtor(pte); +#ifdef CONFIG_ARM_LPAE + tlb_add_flush(tlb, addr); +#else /* * With the classic ARM MMU, a pte page has two corresponding pmd * entries, each covering 1MB. @@ -206,6 +209,7 @@ static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte, addr &= PMD_MASK; tlb_add_flush(tlb, addr + SZ_1M - PAGE_SIZE); tlb_add_flush(tlb, addr + SZ_1M); +#endif tlb_remove_page(tlb, pte); } -- cgit v0.10.2 From 36418c516b31bff4ff949c7c618430a1a514debe Mon Sep 17 00:00:00 2001 From: Jonathan Austin Date: Thu, 23 Aug 2012 14:02:59 +0100 Subject: ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEM With !HIGHMEM, sanity_check_meminfo checks for banks that completely or partially overlap the vmalloc region. The test for partial overlap checks __va(bank->start + bank->size) > vmalloc_min. This is not appropriate if there is a non-linear translation between virtual and physical addresses, as bank->start + bank->size is actually in the bank following the one being interrogated. In most cases, even when using SPARSEMEM, this is not problematic as the subsequent bank will start at a higher va than the one in question. However if the physical to virtual address conversion is not monotonic increasing, the incorrect test could result in a bank not being truncated when it should be. This patch ensures we perform the va-pa conversion on memory from the bank we are interested in, not the following one. Reported-by: ??? (Steve) Signed-off-by: Jonathan Austin Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index eab94bc..c2fa21d 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -961,8 +961,8 @@ void __init sanity_check_meminfo(void) * Check whether this memory bank would partially overlap * the vmalloc area. */ - if (__va(bank->start + bank->size) > vmalloc_min || - __va(bank->start + bank->size) < __va(bank->start)) { + if (__va(bank->start + bank->size - 1) >= vmalloc_min || + __va(bank->start + bank->size - 1) <= __va(bank->start)) { unsigned long newsize = vmalloc_min - __va(bank->start); printk(KERN_NOTICE "Truncating RAM at %.8llx-%.8llx " "to -%.8llx (vmalloc region overlap).\n", -- cgit v0.10.2 From d8c3bb911f5afc32f7276c2e2e89eb58af4306ae Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Aug 2012 18:10:42 +0100 Subject: ASoC: dapm: Make sure we update the bias level for CODECs with no op Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) ensures that we update non-CODEC DAPM contexts but means that if a CODEC has no set_bias_level() operation it'll not be updated. Fix that. Signed-off-by: Mark Brown diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index dd7c49f..145ec4b 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -291,6 +291,8 @@ static int snd_soc_dapm_set_bias_level(struct snd_soc_dapm_context *dapm, if (dapm->codec->driver->set_bias_level) ret = dapm->codec->driver->set_bias_level(dapm->codec, level); + else + dapm->bias_level = level; } else dapm->bias_level = level; -- cgit v0.10.2 From 4e872a46823c64e655d997e1e04a4b32e326aa1b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Thu, 23 Aug 2012 18:20:49 +0100 Subject: ASoC: dapm: Don't force card bias level to be updated Commit 412312 (ASoC: dapm: Make sure all dapm contexts are updated) means that any DAPM context being updated will have the bias level automatically set, including the card. We can't safely do this as the card callbacks are called for each device context and so the management of the card bias is more complex. Several multi-component cards rely on this behaviour. Skip updates during the asynchronous run entirely. We should really do them in the synchronous section but it's not 100% clear which values to pick as the different DAPM contexts may have different bias levels. Signed-off-by: Mark Brown diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 145ec4b..f90139b 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -293,8 +293,9 @@ static int snd_soc_dapm_set_bias_level(struct snd_soc_dapm_context *dapm, level); else dapm->bias_level = level; - } else + } else if (!card || dapm != &card->dapm) { dapm->bias_level = level; + } if (ret != 0) goto out; -- cgit v0.10.2 From 13b5533a38b1eec9d61a07711dc075f03ae47a36 Mon Sep 17 00:00:00 2001 From: Benjamin Wang Date: Sun, 26 Aug 2012 18:04:10 +0800 Subject: target: Check idr_get_new return value in iscsi_login_zero_tsih_s1 This patch updates iscsi_login_zero_tsih_s1() usage for generating iscsi_session->session_index to properly check the return value from idr_get_new(), and reject the iSCSI login attempt with exception status ISCSI_LOGIN_STATUS_NO_RESOURCES in the event of a failure. Signed-off-by: Benjamin Wang Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/iscsi/iscsi_target_login.c b/drivers/target/iscsi/iscsi_target_login.c index 0694d9b..6aba439 100644 --- a/drivers/target/iscsi/iscsi_target_login.c +++ b/drivers/target/iscsi/iscsi_target_login.c @@ -221,6 +221,7 @@ static int iscsi_login_zero_tsih_s1( { struct iscsi_session *sess = NULL; struct iscsi_login_req *pdu = (struct iscsi_login_req *)buf; + int ret; sess = kzalloc(sizeof(struct iscsi_session), GFP_KERNEL); if (!sess) { @@ -257,9 +258,17 @@ static int iscsi_login_zero_tsih_s1( return -ENOMEM; } spin_lock(&sess_idr_lock); - idr_get_new(&sess_idr, NULL, &sess->session_index); + ret = idr_get_new(&sess_idr, NULL, &sess->session_index); spin_unlock(&sess_idr_lock); + if (ret < 0) { + pr_err("idr_get_new() for sess_idr failed\n"); + iscsit_tx_login_rsp(conn, ISCSI_STATUS_CLS_TARGET_ERR, + ISCSI_LOGIN_STATUS_NO_RESOURCES); + kfree(sess); + return -ENOMEM; + } + sess->creation_time = get_jiffies_64(); spin_lock_init(&sess->session_stats_lock); /* -- cgit v0.10.2 From e3e45c01ae690e65f2650e5288b9af802e95a136 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Fri, 24 Aug 2012 15:34:34 +0200 Subject: perf/x86: Fix microcode revision check for SNB-PEBS The following patch makes the microcode update code path actually invoke the perf_check_microcode() function and thus potentially renabling SNB PEBS. By default, CONFIG_MICROCODE_OLD_INTERFACE is forced to Y in arch/x86/Kconfig. There is no way to disable this. That means that the code path used in arch/x86/kernel/microcode_core.c did not include the call to perf_check_microcode(). Thus, even though the microcode was updated to a version that fixes the SNB PEBS problem, perf_event would still return EOPNOTSUPP when enabling precise sampling. This patch simply adds a call to perf_check_microcode() in the call path used when OLD_INTERFACE=y. Signed-off-by: Stephane Eranian Acked-by: Borislav Petkov Cc: peterz@infradead.org Cc: andi@firstfloor.org Link: http://lkml.kernel.org/r/20120824133434.GA8014@quad Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/microcode_core.c b/arch/x86/kernel/microcode_core.c index 4873e62..9e5bcf1 100644 --- a/arch/x86/kernel/microcode_core.c +++ b/arch/x86/kernel/microcode_core.c @@ -225,6 +225,9 @@ static ssize_t microcode_write(struct file *file, const char __user *buf, if (do_microcode_update(buf, len) == 0) ret = (ssize_t)len; + if (ret > 0) + perf_check_microcode(); + mutex_unlock(µcode_mutex); put_online_cpus(); -- cgit v0.10.2 From 81ff3478d9ba7f0b48b0abef740e542fd83adf79 Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Thu, 19 Jul 2012 18:28:26 +0200 Subject: oprofile, s390: Fix uninitialized memory access when writing to oprofilefs If oprofilefs_ulong_from_user() is called with count equals zero, *val remains unchanged. Depending on the implementation it might be uninitialized. Fixing users of oprofilefs_ulong_ from_user(). We missed these s390 changes with: 913050b oprofile: Fix uninitialized memory access when writing to writing to oprofilefs Cc: stable@vger.kernel.org # 3.3+ Signed-off-by: Robert Richter diff --git a/arch/s390/oprofile/init.c b/arch/s390/oprofile/init.c index a1e9d69..584b936 100644 --- a/arch/s390/oprofile/init.c +++ b/arch/s390/oprofile/init.c @@ -169,7 +169,7 @@ static ssize_t hw_interval_write(struct file *file, char const __user *buf, if (*offset) return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val < oprofile_min_interval) oprofile_hw_interval = oprofile_min_interval; @@ -212,7 +212,7 @@ static ssize_t hwsampler_zero_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0) return -EINVAL; @@ -243,7 +243,7 @@ static ssize_t hwsampler_kernel_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -278,7 +278,7 @@ static ssize_t hwsampler_user_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) @@ -317,7 +317,7 @@ static ssize_t timer_enabled_write(struct file *file, char const __user *buf, return -EINVAL; retval = oprofilefs_ulong_from_user(&val, buf, count); - if (retval) + if (retval <= 0) return retval; if (val != 0 && val != 1) -- cgit v0.10.2 From 1fa6535faf055cd71311ab887e94fc234f04ee18 Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Sat, 25 Aug 2012 19:28:06 +0200 Subject: Bluetooth: Add support for Apple vendor-specific devices As pointed out by Gustavo and Marcel, all Apple-specific Broadcom devices seen so far have the same interface class, subclass and protocol numbers. This patch adds an entry which matches all of them, using the new USB_VENDOR_AND_INTERFACE_INFO() macro. In particular, this patch adds support for the MacBook Pro Retina (05ac:8286), which is not in the present list. Signed-off-by: Henrik Rydberg Tested-by: Shea Levy Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index e791b20..654e248 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -52,6 +52,9 @@ static struct usb_device_id btusb_table[] = { /* Generic Bluetooth USB device */ { USB_DEVICE_INFO(0xe0, 0x01, 0x01) }, + /* Apple-specific (Broadcom) devices */ + { USB_VENDOR_AND_INTERFACE_INFO(0x05ac, 0xff, 0x01, 0x01) }, + /* Broadcom SoftSailing reporting vendor specific */ { USB_DEVICE(0x0a5c, 0x21e1) }, -- cgit v0.10.2 From 2bd4082776ff17a0d0d565852afb422931c2f6f2 Mon Sep 17 00:00:00 2001 From: "RongQing.Li" Date: Mon, 2 Jul 2012 12:34:30 +0800 Subject: MIPS: CMP/SMTC: Fix tc_id calculation Currently the tc_id code is: (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; After processing this becomes: (read_c0_tcbind() >> 21) & ((0xff) << 21) But it should be: (read_c0_tcbind() & ((0xff)<< 21)) >> 21 Signed-off-by: RongQing.Li Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4077/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/smp-cmp.c b/arch/mips/kernel/smp-cmp.c index e7e03ec..afc379c 100644 --- a/arch/mips/kernel/smp-cmp.c +++ b/arch/mips/kernel/smp-cmp.c @@ -102,7 +102,7 @@ static void cmp_init_secondary(void) c->vpe_id = (read_c0_tcbind() >> TCBIND_CURVPE_SHIFT) & TCBIND_CURVPE; #endif #ifdef CONFIG_MIPS_MT_SMTC - c->tc_id = (read_c0_tcbind() >> TCBIND_CURTC_SHIFT) & TCBIND_CURTC; + c->tc_id = (read_c0_tcbind() & TCBIND_CURTC) >> TCBIND_CURTC_SHIFT; #endif } -- cgit v0.10.2 From af89fa3986b9d034a286544ab1ed95096496a2f9 Mon Sep 17 00:00:00 2001 From: Jovi Zhang Date: Wed, 22 Aug 2012 10:34:08 +0800 Subject: MIPS: mm: Add compound tail page _mapcount when mapped See commit b6999b191 which did the same modification for x86's mm/gup, Quote from commit b6999b191: "If compound pages are used and the page is a tail page, gup_huge_pmd() increases _mapcount to record tail page are mapped while gup_huge_pud does not do that." [ralf@linux-mips.org: fixed rejects caused by the original patch getting linewrapped.] Signed-off-by: Jovi Zhang Cc: Youquan Song Cc: Andi Kleen Cc: Patchwork: https://patchwork.linux-mips.org/patch/4291/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/gup.c b/arch/mips/mm/gup.c index 33aadbc..dcfd573 100644 --- a/arch/mips/mm/gup.c +++ b/arch/mips/mm/gup.c @@ -152,6 +152,8 @@ static int gup_huge_pud(pud_t pud, unsigned long addr, unsigned long end, do { VM_BUG_ON(compound_head(page) != head); pages[*nr] = page; + if (PageTail(page)) + get_huge_page_tail(page); (*nr)++; page++; refs++; -- cgit v0.10.2 From cc110922da7e902b62d18641a370fec01a9fa794 Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Thu, 23 Aug 2012 21:32:43 -0300 Subject: Bluetooth: Change signature of smp_conn_security() To make it clear that it may be called from contexts that may not have any knowledge of L2CAP, we change the connection parameter, to receive a hci_conn. This also makes it clear that it is checking the security of the link. Signed-off-by: Vinicius Costa Gomes Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/smp.h b/include/net/bluetooth/smp.h index ca356a7..8b27927 100644 --- a/include/net/bluetooth/smp.h +++ b/include/net/bluetooth/smp.h @@ -136,7 +136,7 @@ struct smp_chan { }; /* SMP Commands */ -int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level); +int smp_conn_security(struct hci_conn *hcon, __u8 sec_level); int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb); int smp_distribute_keys(struct l2cap_conn *conn, __u8 force); int smp_user_confirm_reply(struct hci_conn *conn, u16 mgmt_op, __le32 passkey); diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index daa149b..4ea1710 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1199,14 +1199,15 @@ clean: static void l2cap_conn_ready(struct l2cap_conn *conn) { struct l2cap_chan *chan; + struct hci_conn *hcon = conn->hcon; BT_DBG("conn %p", conn); - if (!conn->hcon->out && conn->hcon->type == LE_LINK) + if (!hcon->out && hcon->type == LE_LINK) l2cap_le_conn_ready(conn); - if (conn->hcon->out && conn->hcon->type == LE_LINK) - smp_conn_security(conn, conn->hcon->pending_sec_level); + if (hcon->out && hcon->type == LE_LINK) + smp_conn_security(hcon, hcon->pending_sec_level); mutex_lock(&conn->chan_lock); @@ -1219,8 +1220,8 @@ static void l2cap_conn_ready(struct l2cap_conn *conn) continue; } - if (conn->hcon->type == LE_LINK) { - if (smp_conn_security(conn, chan->sec_level)) + if (hcon->type == LE_LINK) { + if (smp_conn_security(hcon, chan->sec_level)) l2cap_chan_ready(chan); } else if (chan->chan_type != L2CAP_CHAN_CONN_ORIENTED) { diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index b94abd3..45cb0b0 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -615,7 +615,7 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, ch break; } - if (smp_conn_security(conn, sec.level)) + if (smp_conn_security(conn->hcon, sec.level)) break; sk->sk_state = BT_CONFIG; chan->state = BT_CONFIG; diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 98ffc1b..8c225ef 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -760,9 +760,9 @@ static u8 smp_cmd_security_req(struct l2cap_conn *conn, struct sk_buff *skb) return 0; } -int smp_conn_security(struct l2cap_conn *conn, __u8 sec_level) +int smp_conn_security(struct hci_conn *hcon, __u8 sec_level) { - struct hci_conn *hcon = conn->hcon; + struct l2cap_conn *conn = hcon->l2cap_data; struct smp_chan *smp = conn->smp_chan; __u8 authreq; -- cgit v0.10.2 From d8343f125710fb596f7a88cd756679f14f4e77b9 Mon Sep 17 00:00:00 2001 From: Vinicius Costa Gomes Date: Thu, 23 Aug 2012 21:32:44 -0300 Subject: Bluetooth: Fix sending a HCI Authorization Request over LE links MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In the case that the link is already in the connected state and a Pairing request arrives from the mgmt interface, hci_conn_security() would be called but it was not considering LE links. Reported-by: João Paulo Rechi Vita Signed-off-by: Vinicius Costa Gomes Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 5ad7da2..3c094e7 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -29,6 +29,7 @@ #include #include #include +#include static void hci_le_connect(struct hci_conn *conn) { @@ -619,6 +620,9 @@ int hci_conn_security(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) { BT_DBG("hcon %p", conn); + if (conn->type == LE_LINK) + return smp_conn_security(conn, sec_level); + /* For sdp we don't need the link key. */ if (sec_level == BT_SECURITY_SDP) return 1; -- cgit v0.10.2 From 50d4b3062d6d4f165c76854a7644b1502836f9b9 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 18 Aug 2012 09:48:00 +0100 Subject: staging:iio: prevent divide by zero bugs "val" is used as a divisor later, so we should check for zero here to avoid a division by zero. Signed-off-by: Dan Carpenter Acked-by: Lars-Peter Clausen Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 0958372..19a064d 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -647,6 +647,8 @@ static ssize_t ad7192_write_frequency(struct device *dev, ret = strict_strtoul(buf, 10, &lval); if (ret) return ret; + if (lval == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); if (iio_buffer_enabled(indio_dev)) { diff --git a/drivers/staging/iio/gyro/adis16260_core.c b/drivers/staging/iio/gyro/adis16260_core.c index 93aa431..eb8e9d6 100644 --- a/drivers/staging/iio/gyro/adis16260_core.c +++ b/drivers/staging/iio/gyro/adis16260_core.c @@ -195,6 +195,8 @@ static ssize_t adis16260_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); if (spi_get_device_id(st->us)) { diff --git a/drivers/staging/iio/imu/adis16400_core.c b/drivers/staging/iio/imu/adis16400_core.c index 1f4c177..a618327 100644 --- a/drivers/staging/iio/imu/adis16400_core.c +++ b/drivers/staging/iio/imu/adis16400_core.c @@ -234,6 +234,8 @@ static ssize_t adis16400_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); diff --git a/drivers/staging/iio/meter/ade7753.c b/drivers/staging/iio/meter/ade7753.c index f04ece7..3ccff18 100644 --- a/drivers/staging/iio/meter/ade7753.c +++ b/drivers/staging/iio/meter/ade7753.c @@ -425,6 +425,8 @@ static ssize_t ade7753_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); diff --git a/drivers/staging/iio/meter/ade7754.c b/drivers/staging/iio/meter/ade7754.c index 6cee28a..abb1e9c 100644 --- a/drivers/staging/iio/meter/ade7754.c +++ b/drivers/staging/iio/meter/ade7754.c @@ -445,6 +445,8 @@ static ssize_t ade7754_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); diff --git a/drivers/staging/iio/meter/ade7759.c b/drivers/staging/iio/meter/ade7759.c index b3f7e0fa9..eb0a2a9 100644 --- a/drivers/staging/iio/meter/ade7759.c +++ b/drivers/staging/iio/meter/ade7759.c @@ -385,6 +385,8 @@ static ssize_t ade7759_write_frequency(struct device *dev, ret = strict_strtol(buf, 10, &val); if (ret) return ret; + if (val == 0) + return -EINVAL; mutex_lock(&indio_dev->mlock); -- cgit v0.10.2 From d1dc9c1276a4d988b29372fe67796430d5cbc756 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Wed, 22 Aug 2012 20:37:00 +0100 Subject: staging iio: fix potential memory leak in lis3l02dq_ring.c Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron diff --git a/drivers/staging/iio/accel/lis3l02dq_ring.c b/drivers/staging/iio/accel/lis3l02dq_ring.c index 18d108f..f3da590 100644 --- a/drivers/staging/iio/accel/lis3l02dq_ring.c +++ b/drivers/staging/iio/accel/lis3l02dq_ring.c @@ -121,8 +121,10 @@ static int lis3l02dq_get_buffer_element(struct iio_dev *indio_dev, if (rx_array == NULL) return -ENOMEM; ret = lis3l02dq_read_all(indio_dev, rx_array); - if (ret < 0) + if (ret < 0) { + kfree(rx_array); return ret; + } for (i = 0; i < scan_count; i++) data[i] = combine_8_to_16(rx_array[i*4+1], rx_array[i*4+3]); -- cgit v0.10.2 From f755bbbf1f9f180aa61eb730d638b62e225bfc10 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 25 Aug 2012 21:57:09 +0200 Subject: drivers/iio/adc/at91_adc.c: adjust inconsistent IS_ERR and PTR_ERR Change the call to PTR_ERR to access the value just tested by IS_ERR. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ expression e,e1; @@ ( if (IS_ERR(e)) { ... PTR_ERR(e) ... } | if (IS_ERR(e=e1)) { ... PTR_ERR(e) ... } | *if (IS_ERR(e)) { ... * PTR_ERR(e1) ... } ) // Signed-off-by: Julia Lawall Signed-off-by: Jonathan Cameron diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index f61780a..3bd5540 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -617,7 +617,7 @@ static int __devinit at91_adc_probe(struct platform_device *pdev) st->adc_clk = clk_get(&pdev->dev, "adc_op_clk"); if (IS_ERR(st->adc_clk)) { dev_err(&pdev->dev, "Failed to get the ADC clock.\n"); - ret = PTR_ERR(st->clk); + ret = PTR_ERR(st->adc_clk); goto error_disable_clk; } -- cgit v0.10.2 From b969afc8b719bbe3f0842a694e6bf5e87f08868f Mon Sep 17 00:00:00 2001 From: Joachim Eastwood Date: Thu, 23 Aug 2012 18:14:54 +0200 Subject: ASoC: atmel-ssc: include linux/io.h for raw io Include linux/io.h for raw io operations in atmel-scc header. This fixes the following build error: CC [M] sound/soc/atmel/atmel_ssc_dai.o sound/soc/atmel/atmel_ssc_dai.c: In function 'atmel_ssc_interrupt': sound/soc/atmel/atmel_ssc_dai.c:171: error: implicit declaration of function '__raw_readl' sound/soc/atmel/atmel_ssc_dai.c: In function 'atmel_ssc_shutdown': sound/soc/atmel/atmel_ssc_dai.c:249: error: implicit declaration of function '__raw_writel' Signed-off-by: Joachim Eastwood Signed-off-by: Nicolas Ferre Acked-by: Jean-Christophe PLAGNIOL-VILLARD Signed-off-by: Mark Brown diff --git a/include/linux/atmel-ssc.h b/include/linux/atmel-ssc.h index 0602339..4eb3175 100644 --- a/include/linux/atmel-ssc.h +++ b/include/linux/atmel-ssc.h @@ -3,6 +3,7 @@ #include #include +#include struct ssc_device { struct list_head list; -- cgit v0.10.2 From c921928661eda599d73a6a86e58bdd5aecfa18cb Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Fri, 24 Aug 2012 21:20:15 -0600 Subject: sound: tegra_alc5632: remove HP detect GPIO inversion Both the schematics and practical testing show that the HP detect GPIO is high when the headphones are plugged in. Hence, the snd_soc_jack_gpio should not specify to invert the signal. Signed-off-by: Stephen Warren Acked-by: Andrey Danin Signed-off-by: Mark Brown Cc: # v3.4 v3.5 diff --git a/sound/soc/tegra/tegra_alc5632.c b/sound/soc/tegra/tegra_alc5632.c index e463529..76cb1b3 100644 --- a/sound/soc/tegra/tegra_alc5632.c +++ b/sound/soc/tegra/tegra_alc5632.c @@ -89,7 +89,6 @@ static struct snd_soc_jack_gpio tegra_alc5632_hp_jack_gpio = { .name = "Headset detection", .report = SND_JACK_HEADSET, .debounce_time = 150, - .invert = 1, }; static const struct snd_soc_dapm_widget tegra_alc5632_dapm_widgets[] = { -- cgit v0.10.2 From 6fb8a90aa3f2319a25f3396b1e9273300f8903b8 Mon Sep 17 00:00:00 2001 From: Carlos Maiolino Date: Fri, 10 Aug 2012 15:01:51 -0300 Subject: xfs: fix race while discarding buffers [V4] While xfs_buftarg_shrink() is freeing buffers from the dispose list (filled with buffers from lru list), there is a possibility to have xfs_buf_stale() racing with it, and removing buffers from dispose list before xfs_buftarg_shrink() does it. This happens because xfs_buftarg_shrink() handle the dispose list without locking and the test condition in xfs_buf_stale() checks for the buffer being in *any* list: if (!list_empty(&bp->b_lru)) If the buffer happens to be on dispose list, this causes the buffer counter of lru list (btp->bt_lru_nr) to be decremented twice (once in xfs_buftarg_shrink() and another in xfs_buf_stale()) causing a wrong account usage of the lru list. This may cause xfs_buftarg_shrink() to return a wrong value to the memory shrinker shrink_slab(), and such account error may also cause an underflowed value to be returned; since the counter is lower than the current number of items in the lru list, a decrement may happen when the counter is 0, causing an underflow on the counter. The fix uses a new flag field (and a new buffer flag) to serialize buffer handling during the shrink process. The new flag field has been designed to use btp->bt_lru_lock/unlock instead of xfs_buf_lock/unlock mechanism. dchinner, sandeen, aquini and aris also deserve credits for this. Signed-off-by: Carlos Maiolino Reviewed-by: Ben Myers Reviewed-by: Dave Chinner Signed-off-by: Ben Myers diff --git a/fs/xfs/xfs_buf.c b/fs/xfs/xfs_buf.c index d7a9dd7..933b793 100644 --- a/fs/xfs/xfs_buf.c +++ b/fs/xfs/xfs_buf.c @@ -96,6 +96,7 @@ xfs_buf_lru_add( atomic_inc(&bp->b_hold); list_add_tail(&bp->b_lru, &btp->bt_lru); btp->bt_lru_nr++; + bp->b_lru_flags &= ~_XBF_LRU_DISPOSE; } spin_unlock(&btp->bt_lru_lock); } @@ -154,7 +155,8 @@ xfs_buf_stale( struct xfs_buftarg *btp = bp->b_target; spin_lock(&btp->bt_lru_lock); - if (!list_empty(&bp->b_lru)) { + if (!list_empty(&bp->b_lru) && + !(bp->b_lru_flags & _XBF_LRU_DISPOSE)) { list_del_init(&bp->b_lru); btp->bt_lru_nr--; atomic_dec(&bp->b_hold); @@ -1501,6 +1503,7 @@ xfs_buftarg_shrink( */ list_move(&bp->b_lru, &dispose); btp->bt_lru_nr--; + bp->b_lru_flags |= _XBF_LRU_DISPOSE; } spin_unlock(&btp->bt_lru_lock); diff --git a/fs/xfs/xfs_buf.h b/fs/xfs/xfs_buf.h index d03b73b..7c0b6a0 100644 --- a/fs/xfs/xfs_buf.h +++ b/fs/xfs/xfs_buf.h @@ -38,27 +38,28 @@ typedef enum { XBRW_ZERO = 3, /* Zero target memory */ } xfs_buf_rw_t; -#define XBF_READ (1 << 0) /* buffer intended for reading from device */ -#define XBF_WRITE (1 << 1) /* buffer intended for writing to device */ -#define XBF_READ_AHEAD (1 << 2) /* asynchronous read-ahead */ -#define XBF_ASYNC (1 << 4) /* initiator will not wait for completion */ -#define XBF_DONE (1 << 5) /* all pages in the buffer uptodate */ -#define XBF_STALE (1 << 6) /* buffer has been staled, do not find it */ +#define XBF_READ (1 << 0) /* buffer intended for reading from device */ +#define XBF_WRITE (1 << 1) /* buffer intended for writing to device */ +#define XBF_READ_AHEAD (1 << 2) /* asynchronous read-ahead */ +#define XBF_ASYNC (1 << 4) /* initiator will not wait for completion */ +#define XBF_DONE (1 << 5) /* all pages in the buffer uptodate */ +#define XBF_STALE (1 << 6) /* buffer has been staled, do not find it */ /* I/O hints for the BIO layer */ -#define XBF_SYNCIO (1 << 10)/* treat this buffer as synchronous I/O */ -#define XBF_FUA (1 << 11)/* force cache write through mode */ -#define XBF_FLUSH (1 << 12)/* flush the disk cache before a write */ +#define XBF_SYNCIO (1 << 10)/* treat this buffer as synchronous I/O */ +#define XBF_FUA (1 << 11)/* force cache write through mode */ +#define XBF_FLUSH (1 << 12)/* flush the disk cache before a write */ /* flags used only as arguments to access routines */ -#define XBF_TRYLOCK (1 << 16)/* lock requested, but do not wait */ -#define XBF_UNMAPPED (1 << 17)/* do not map the buffer */ +#define XBF_TRYLOCK (1 << 16)/* lock requested, but do not wait */ +#define XBF_UNMAPPED (1 << 17)/* do not map the buffer */ /* flags used only internally */ -#define _XBF_PAGES (1 << 20)/* backed by refcounted pages */ -#define _XBF_KMEM (1 << 21)/* backed by heap memory */ -#define _XBF_DELWRI_Q (1 << 22)/* buffer on a delwri queue */ -#define _XBF_COMPOUND (1 << 23)/* compound buffer */ +#define _XBF_PAGES (1 << 20)/* backed by refcounted pages */ +#define _XBF_KMEM (1 << 21)/* backed by heap memory */ +#define _XBF_DELWRI_Q (1 << 22)/* buffer on a delwri queue */ +#define _XBF_COMPOUND (1 << 23)/* compound buffer */ +#define _XBF_LRU_DISPOSE (1 << 24)/* buffer being discarded */ typedef unsigned int xfs_buf_flags_t; @@ -72,12 +73,13 @@ typedef unsigned int xfs_buf_flags_t; { XBF_SYNCIO, "SYNCIO" }, \ { XBF_FUA, "FUA" }, \ { XBF_FLUSH, "FLUSH" }, \ - { XBF_TRYLOCK, "TRYLOCK" }, /* should never be set */\ + { XBF_TRYLOCK, "TRYLOCK" }, /* should never be set */\ { XBF_UNMAPPED, "UNMAPPED" }, /* ditto */\ { _XBF_PAGES, "PAGES" }, \ { _XBF_KMEM, "KMEM" }, \ { _XBF_DELWRI_Q, "DELWRI_Q" }, \ - { _XBF_COMPOUND, "COMPOUND" } + { _XBF_COMPOUND, "COMPOUND" }, \ + { _XBF_LRU_DISPOSE, "LRU_DISPOSE" } typedef struct xfs_buftarg { dev_t bt_dev; @@ -124,7 +126,12 @@ typedef struct xfs_buf { xfs_buf_flags_t b_flags; /* status flags */ struct semaphore b_sema; /* semaphore for lockables */ + /* + * concurrent access to b_lru and b_lru_flags are protected by + * bt_lru_lock and not by b_sema + */ struct list_head b_lru; /* lru list */ + xfs_buf_flags_t b_lru_flags; /* internal lru status flags */ wait_queue_head_t b_waiters; /* unpin waiters */ struct list_head b_list; struct xfs_perag *b_pag; /* contains rbtree root */ -- cgit v0.10.2 From bbd99797973f2cebd905bf6469ce08b531ab258f Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 30 Aug 2012 19:24:34 +0200 Subject: cuse: fix fuse_conn_kill() fuse_conn_kill() removed fc->entry, called fuse_ctl_remove_conn() and fuse_bdi_destroy(). None of which is appropriate for cuse cleanup. The fuse_ctl_remove_conn() decrements the nlink on the control filesystem, which is totally bogus. The others are harmless but unnecessary. So move these out from fuse_conn_kill() to fuse_put_super() where they belong. Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index ce0a283..fca222d 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -367,11 +367,6 @@ void fuse_conn_kill(struct fuse_conn *fc) wake_up_all(&fc->waitq); wake_up_all(&fc->blocked_waitq); wake_up_all(&fc->reserved_req_waitq); - mutex_lock(&fuse_mutex); - list_del(&fc->entry); - fuse_ctl_remove_conn(fc); - mutex_unlock(&fuse_mutex); - fuse_bdi_destroy(fc); } EXPORT_SYMBOL_GPL(fuse_conn_kill); @@ -380,7 +375,14 @@ static void fuse_put_super(struct super_block *sb) struct fuse_conn *fc = get_fuse_conn_super(sb); fuse_send_destroy(fc); + fuse_conn_kill(fc); + mutex_lock(&fuse_mutex); + list_del(&fc->entry); + fuse_ctl_remove_conn(fc); + mutex_unlock(&fuse_mutex); + fuse_bdi_destroy(fc); + fuse_conn_put(fc); } -- cgit v0.10.2 From 8d39d801d64658d7d69e4754f287a71e9f9bbcb8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Thu, 30 Aug 2012 19:24:35 +0200 Subject: cuse: kill connection on initialization error Luca Risolia reported that a CUSE daemon will continue to run even if initialization of the emulated device failes for some reason (e.g. the device number is already registered by another driver). This patch disconnects the fuse device on error, which will make the userspace CUSE daemon exit, albeit without indication about what the problem was. Reported-by: Luca Risolia Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/cuse.c b/fs/fuse/cuse.c index 3426521..ee8d550 100644 --- a/fs/fuse/cuse.c +++ b/fs/fuse/cuse.c @@ -396,7 +396,7 @@ err_device: err_region: unregister_chrdev_region(devt, 1); err: - fc->conn_error = 1; + fuse_conn_kill(fc); goto out; } @@ -532,8 +532,6 @@ static int cuse_channel_release(struct inode *inode, struct file *file) cdev_del(cc->cdev); } - /* kill connection and shutdown channel */ - fuse_conn_kill(&cc->fc); rc = fuse_dev_release(inode, file); /* puts the base reference */ return rc; -- cgit v0.10.2 From 45caae74d238ef6583e9402cb8c550cc0b0f7dbd Mon Sep 17 00:00:00 2001 From: Igor Grinberg Date: Tue, 28 Aug 2012 01:26:14 +0300 Subject: ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER Currently, omap2_sync32k_clocksource_init() function initializes the 32K timer as the system clock source regardless of the CONFIG_OMAP_32K_TIMER setting. Fix this by providing a default implementation for !CONFIG_OMAP_32K_TIMER case. Signed-off-by: Igor Grinberg Reviewed-by: Paul Walmsley Acked-by: Santosh Shilimkar Cc: stable@vger.kernel.org Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 2ff6d41..2ba4f57 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -260,6 +260,7 @@ static u32 notrace dmtimer_read_sched_clock(void) return 0; } +#ifdef CONFIG_OMAP_32K_TIMER /* Setup free-running counter for clocksource */ static int __init omap2_sync32k_clocksource_init(void) { @@ -299,6 +300,12 @@ static int __init omap2_sync32k_clocksource_init(void) return ret; } +#else +static inline int omap2_sync32k_clocksource_init(void) +{ + return -ENODEV; +} +#endif static void __init omap2_gptimer_clocksource_init(int gptimer_id, const char *fck_source) -- cgit v0.10.2 From 528c28f5c1cd435c45515b323919205c95342331 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 29 Aug 2012 18:24:30 +0300 Subject: ARM: OMAP: sram: fix OMAP4 errata handling OMAP4-specific code should be executed only if we are running on OMAP4. Otherwise it may break multi-OMAP kernels. Found by reading the code. Signed-off-by: Aaro Koskinen Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 766181c..85c23db 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -175,8 +175,10 @@ static void __init omap_map_sram(void) return; #ifdef CONFIG_OMAP4_ERRATA_I688 + if (cpu_is_omap44xx()) { omap_sram_start += PAGE_SIZE; omap_sram_size -= SZ_16K; + } #endif if (cpu_is_omap34xx()) { /* -- cgit v0.10.2 From b285673489e39252a2c3f0c7a7d77fd28a6cda38 Mon Sep 17 00:00:00 2001 From: Aaro Koskinen Date: Wed, 29 Aug 2012 18:24:31 +0300 Subject: ARM: OMAP: sram: skip the first 16K on OMAP3 HS In some OMAP3 HS devices (at least Nokia N9 and N950), the public SRAM seems to conflict with secure portition of SRAM. When booting the 3.6-rc3 kernel (and also earlier) on these devices, the kernel gets tainted with tons of the following warnings: [ 6.894348] In-band Error seen by MPU at address 0 [...] [ 6.894378] WARNING: at arch/arm/mach-omap2/omap_l3_smx.c:162 Fix this by skipping the first 16K of the public SRAM. (Note that the mapping could not be changed, as it resulted in secure monitor call failure in save_secure_sram().) This will leave 12K SRAM available that should be still sufficient. The patch has been boot tested with vanilla 3.6-rc3 on N900, N950 and N9. Signed-off-by: Aaro Koskinen Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c index 85c23db..024f3b0 100644 --- a/arch/arm/plat-omap/sram.c +++ b/arch/arm/plat-omap/sram.c @@ -68,6 +68,7 @@ static unsigned long omap_sram_start; static void __iomem *omap_sram_base; +static unsigned long omap_sram_skip; static unsigned long omap_sram_size; static void __iomem *omap_sram_ceil; @@ -106,6 +107,7 @@ static int is_sram_locked(void) */ static void __init omap_detect_sram(void) { + omap_sram_skip = SRAM_BOOTLOADER_SZ; if (cpu_class_is_omap2()) { if (is_sram_locked()) { if (cpu_is_omap34xx()) { @@ -113,6 +115,7 @@ static void __init omap_detect_sram(void) if ((omap_type() == OMAP2_DEVICE_TYPE_EMU) || (omap_type() == OMAP2_DEVICE_TYPE_SEC)) { omap_sram_size = 0x7000; /* 28K */ + omap_sram_skip += SZ_16K; } else { omap_sram_size = 0x8000; /* 32K */ } @@ -205,8 +208,8 @@ static void __init omap_map_sram(void) * Looks like we need to preserve some bootloader code at the * beginning of SRAM for jumping to flash for reboot to work... */ - memset_io(omap_sram_base + SRAM_BOOTLOADER_SZ, 0, - omap_sram_size - SRAM_BOOTLOADER_SZ); + memset_io(omap_sram_base + omap_sram_skip, 0, + omap_sram_size - omap_sram_skip); } /* @@ -220,7 +223,7 @@ void *omap_sram_push_address(unsigned long size) { unsigned long available, new_ceil = (unsigned long)omap_sram_ceil; - available = omap_sram_ceil - (omap_sram_base + SRAM_BOOTLOADER_SZ); + available = omap_sram_ceil - (omap_sram_base + omap_sram_skip); if (size > available) { pr_err("Not enough space in SRAM\n"); -- cgit v0.10.2 From a17fb8f520c3c662686aa54a86773f354002c7d3 Mon Sep 17 00:00:00 2001 From: Radek Pilar Date: Fri, 17 Aug 2012 18:03:43 +0200 Subject: ARM: OMAP: Config fix for omap3-touchbook board Fix inconsistency between mach-types and CONFIG_ name that prevents touchbook board from booting. Signed-off-by: Radek Pilar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index dd2db02..0a3e1b9 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -231,10 +231,11 @@ config MACH_OMAP3_PANDORA select OMAP_PACKAGE_CBB select REGULATOR_FIXED_VOLTAGE if REGULATOR -config MACH_OMAP3_TOUCHBOOK +config MACH_TOUCHBOOK bool "OMAP3 Touch Book" depends on ARCH_OMAP3 default y + select OMAP_PACKAGE_CBB config MACH_OMAP_3430SDP bool "OMAP 3430 SDP board" diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index f6a24b3..34c2c7f 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -255,7 +255,7 @@ obj-$(CONFIG_MACH_OMAP_3630SDP) += board-zoom-display.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o -obj-$(CONFIG_MACH_OMAP3_TOUCHBOOK) += board-omap3touchbook.o +obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP_4430SDP) += board-4430sdp.o obj-$(CONFIG_MACH_OMAP4_PANDA) += board-omap4panda.o -- cgit v0.10.2 From 37d7b34f05b7bcca364bdf47d8955e766094a244 Mon Sep 17 00:00:00 2001 From: Yi Zou Date: Thu, 30 Aug 2012 16:26:25 -0700 Subject: block: rate-limit the error message from failing commands When performing a cable pull test w/ active stress I/O using fio over a dual port Intel 82599 FCoE CNA, w/ 256LUNs on one port and about 32LUNs on the other, it is observed that the system becomes not usable due to scsi-ml being busy printing the error messages for all the failing commands. I don't believe this problem is specific to FCoE and these commands are anyway failing due to link being down (DID_NO_CONNECT), just rate-limit the messages here to solve this issue. v2->v1: use __ratelimit() as Tomas Henzl mentioned as the proper way for rate-limit per function. However, in this case, the failed i/o gets to blk_end_request_err() and then blk_update_request(), which also has to be rate-limited, as added in the v2 of this patch. v3-v2: resolved conflict to apply on current 3.6-rc3 upstream tip. Signed-off-by: Yi Zou Cc: www.Open-FCoE.org Cc: Tomas Henzl Cc: Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 4b4dbdf..ee3cb3a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -2254,9 +2254,11 @@ bool blk_update_request(struct request *req, int error, unsigned int nr_bytes) error_type = "I/O"; break; } - printk(KERN_ERR "end_request: %s error, dev %s, sector %llu\n", - error_type, req->rq_disk ? req->rq_disk->disk_name : "?", - (unsigned long long)blk_rq_pos(req)); + printk_ratelimited(KERN_ERR "end_request: %s error, dev %s, sector %llu\n", + error_type, req->rq_disk ? + req->rq_disk->disk_name : "?", + (unsigned long long)blk_rq_pos(req)); + } blk_account_io_completion(req, nr_bytes); -- cgit v0.10.2 From a348cd5fd85dbca7260ef865c5def85929932861 Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 31 Aug 2012 09:56:25 +1000 Subject: drm/nvd0/disp: hopefully fix selection of 6/8bpc mode on DP outputs I have a very limited number of traces available for DP on NVD9+, but, these values produce the same as the binary driver on a confirmed 18-bit eDP panel and a confirmed 24-bit eDP panel (Retina MBP). It's interesting that the bitfield values also match the MODE_CTRL values that control the same thing on nv50:nvd9. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nvd0_display.c b/drivers/gpu/drm/nouveau/nvd0_display.c index dac525b..8a2fc89 100644 --- a/drivers/gpu/drm/nouveau/nvd0_display.c +++ b/drivers/gpu/drm/nouveau/nvd0_display.c @@ -1510,10 +1510,10 @@ nvd0_sor_mode_set(struct drm_encoder *encoder, struct drm_display_mode *umode, case OUTPUT_DP: if (nv_connector->base.display_info.bpc == 6) { nv_encoder->dp.datarate = mode->clock * 18 / 8; - syncs |= 0x00000140; + syncs |= 0x00000002 << 6; } else { nv_encoder->dp.datarate = mode->clock * 24 / 8; - syncs |= 0x00000180; + syncs |= 0x00000005 << 6; } if (nv_encoder->dcb->sorconf.link & 1) -- cgit v0.10.2 From 991083ba60f89e717e3a4175be96d48a810e9eae Mon Sep 17 00:00:00 2001 From: Ben Skeggs Date: Fri, 31 Aug 2012 10:51:20 +1000 Subject: drm/nv50-/gpio: initialise to vbios defaults during init This is required to fix an issue on the Retina MBP where the eDP panel's AUX channel isn't wired up to the HPD pin for the panel, causing our aux code to bail out early. From looking at various traces of the binary driver, it appears NVIDIA do something very similar on at least all nv50+ chipsets during their initialisation sequence. So, hopefully this is safe. Issue and fix initially tracked down by Ryan Bourgeois on fdo#51971. Backported fix from reworked nouveau kernel module. Signed-off-by: Ben Skeggs diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c index f429e6a..f034905 100644 --- a/drivers/gpu/drm/nouveau/nv50_gpio.c +++ b/drivers/gpu/drm/nouveau/nv50_gpio.c @@ -115,6 +115,9 @@ nv50_gpio_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; + /* initialise gpios and routing to vbios defaults */ + nouveau_gpio_reset(dev); + /* disable, and ack any pending gpio interrupts */ nv_wr32(dev, 0xe050, 0x00000000); nv_wr32(dev, 0xe054, 0xffffffff); -- cgit v0.10.2 From fd4fb262b31ecb06bf93defb036e72b33ddf0200 Mon Sep 17 00:00:00 2001 From: Prasad Joshi Date: Fri, 31 Aug 2012 08:55:21 +0530 Subject: ASoC: spear: correct the check for NULL dma_buffer pointer The if condition if (!buf && !buf->area) checks if the buf pointer is NULL and then dereferences it again to check if the buffer area is NULL, resulting in possible NULL dereference. Signed-off-by: Prasad Joshi Signed-off-by: Mark Brown diff --git a/sound/soc/spear/spear_pcm.c b/sound/soc/spear/spear_pcm.c index 97c2cac..8c7f237 100644 --- a/sound/soc/spear/spear_pcm.c +++ b/sound/soc/spear/spear_pcm.c @@ -138,7 +138,7 @@ static void spear_pcm_free(struct snd_pcm *pcm) continue; buf = &substream->dma_buffer; - if (!buf && !buf->area) + if (!buf || !buf->area) continue; dma_free_writecombine(pcm->card->dev, buf->bytes, -- cgit v0.10.2 From 39855b5ba9a72a80de96009011b7f8b2fb01612b Mon Sep 17 00:00:00 2001 From: Joe Stringer Date: Fri, 31 Aug 2012 15:28:28 -0700 Subject: openvswitch: Fix typo Signed-off-by: Joe Stringer Signed-off-by: Jesse Gross diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c index f3f96ba..954405c 100644 --- a/net/openvswitch/actions.c +++ b/net/openvswitch/actions.c @@ -45,7 +45,7 @@ static int make_writable(struct sk_buff *skb, int write_len) return pskb_expand_head(skb, 0, 0, GFP_ATOMIC); } -/* remove VLAN header from packet and update csum accrodingly. */ +/* remove VLAN header from packet and update csum accordingly. */ static int __pop_vlan_tci(struct sk_buff *skb, __be16 *current_tci) { struct vlan_hdr *vhdr; -- cgit v0.10.2 From 0273de08c455031335dbea2630208f66106b0c14 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Mon, 3 Sep 2012 07:22:16 +1000 Subject: drm/ast: drop debug level on error printk This was never an error, drop to a debug print. Reported-by: Keven Lachance Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ast/ast_mode.c b/drivers/gpu/drm/ast/ast_mode.c index 7282c08..a712caf 100644 --- a/drivers/gpu/drm/ast/ast_mode.c +++ b/drivers/gpu/drm/ast/ast_mode.c @@ -841,7 +841,7 @@ int ast_cursor_init(struct drm_device *dev) ast->cursor_cache = obj; ast->cursor_cache_gpu_addr = gpu_addr; - DRM_ERROR("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr); + DRM_DEBUG_KMS("pinned cursor cache at %llx\n", ast->cursor_cache_gpu_addr); return 0; fail: return ret; -- cgit v0.10.2 From c1f05264d834e9fb9a4ebfd36dbd86172ac7107a Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 30 Aug 2012 11:06:18 +1000 Subject: drm/i915/edp: get the panel delay before powering up In order to setup the i2c channel, we power up the panel via ironlake_edp_panel_vdd_on, however it requires intel_dp->panel_power_up_delay to be initialised, which hasn't been setup yet. So move things around so we set the panel power up values first then init the i2c stuff. This is one step to fixing the eDP panel in the MBP from uninitialised state. Signed-off-by: Dave Airlie Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c index a6c426a..ace757a 100644 --- a/drivers/gpu/drm/i915/intel_dp.c +++ b/drivers/gpu/drm/i915/intel_dp.c @@ -2533,14 +2533,10 @@ intel_dp_init(struct drm_device *dev, int output_reg) break; } - intel_dp_i2c_init(intel_dp, intel_connector, name); - /* Cache some DPCD data in the eDP case */ if (is_edp(intel_dp)) { - bool ret; struct edp_power_seq cur, vbt; u32 pp_on, pp_off, pp_div; - struct edid *edid; pp_on = I915_READ(PCH_PP_ON_DELAYS); pp_off = I915_READ(PCH_PP_OFF_DELAYS); @@ -2591,6 +2587,13 @@ intel_dp_init(struct drm_device *dev, int output_reg) DRM_DEBUG_KMS("backlight on delay %d, off delay %d\n", intel_dp->backlight_on_delay, intel_dp->backlight_off_delay); + } + + intel_dp_i2c_init(intel_dp, intel_connector, name); + + if (is_edp(intel_dp)) { + bool ret; + struct edid *edid; ironlake_edp_panel_vdd_on(intel_dp); ret = intel_dp_get_dpcd(intel_dp); -- cgit v0.10.2 From fcbc50da7753b210b4442ca9abc4efbd4e481f6e Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Wed, 29 Aug 2012 14:08:42 +0300 Subject: drm/i915: only enable sdvo hotplug irq if needed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Avoid constant wakeups caused by noisy irq lines when we don't even care about the irq. This should be particularly useful for i945g/gm where the hotplug has been disabled: commit 768b107e4b3be0acf6f58e914afe4f337c00932b Author: Daniel Vetter Date: Fri May 4 11:29:56 2012 +0200 drm/i915: disable sdvo hotplug on i945g/gm v2: While at it, remove the bogus hotplug_active read, and do not mask hotplug_active[0] before checking whether the irq is needed, per discussion with Daniel on IRC. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=38442 Tested-by: Dominik Köppl Signed-off-by: Jani Nikula Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index d81bb0b..123afd3 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2573,7 +2573,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) hotplug_mask = intel_sdvo->is_sdvob ? SDVOB_HOTPLUG_INT_STATUS_I915 : SDVOC_HOTPLUG_INT_STATUS_I915; } - dev_priv->hotplug_supported_mask |= hotplug_mask; drm_encoder_helper_add(&intel_encoder->base, &intel_sdvo_helper_funcs); @@ -2581,14 +2580,6 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) if (!intel_sdvo_get_capabilities(intel_sdvo, &intel_sdvo->caps)) goto err; - /* Set up hotplug command - note paranoia about contents of reply. - * We assume that the hardware is in a sane state, and only touch - * the bits we think we understand. - */ - intel_sdvo_get_value(intel_sdvo, SDVO_CMD_GET_ACTIVE_HOT_PLUG, - &intel_sdvo->hotplug_active, 2); - intel_sdvo->hotplug_active[0] &= ~0x3; - if (intel_sdvo_output_setup(intel_sdvo, intel_sdvo->caps.output_flags) != true) { DRM_DEBUG_KMS("SDVO output failed to setup on %s\n", @@ -2596,6 +2587,12 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) goto err; } + /* Only enable the hotplug irq if we need it, to work around noisy + * hotplug lines. + */ + if (intel_sdvo->hotplug_active[0]) + dev_priv->hotplug_supported_mask |= hotplug_mask; + intel_sdvo_select_ddc_bus(dev_priv, intel_sdvo, sdvo_reg); /* Set the input timing to the screen. Assume always input 0. */ -- cgit v0.10.2 From d5feaea364281a7e9b80b4712e790ab908d61711 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Thu, 30 Aug 2012 18:52:54 +0200 Subject: s390/mm: fix deadlock in unmap_hugepage_range() git commit cd2934a3 moved the flush_tlb_range() within __unmap_hugepage_range() inside the mm->page_table_lock, which triggered a deadlock in s390 tlb flushing code. __tlb_flush_mm_cond() also tries to acquire the mm->page_table_lock, but that is not needed because all callers already have mm->mmap_sem or mm->page_table_lock, so it can be safely removed to fix the deadlock. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/tlbflush.h b/arch/s390/include/asm/tlbflush.h index 9fde315..1d8fe2b 100644 --- a/arch/s390/include/asm/tlbflush.h +++ b/arch/s390/include/asm/tlbflush.h @@ -90,12 +90,10 @@ static inline void __tlb_flush_mm(struct mm_struct * mm) static inline void __tlb_flush_mm_cond(struct mm_struct * mm) { - spin_lock(&mm->page_table_lock); if (mm->context.flush_mm) { __tlb_flush_mm(mm); mm->context.flush_mm = 0; } - spin_unlock(&mm->page_table_lock); } /* -- cgit v0.10.2 From 381bf7cad9dbce701c618f8942fd35954952ef39 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 28 Aug 2012 10:38:03 +0200 Subject: fuse: mark variables uninitialized gcc 4.6.3 complains about uninitialized variables in fs/fuse/control.c: CC fs/fuse/control.o fs/fuse/control.c: In function 'fuse_conn_congestion_threshold_write': fs/fuse/control.c:165:29: warning: 'val' may be used uninitialized in this function [-Wuninitialized] fs/fuse/control.c: In function 'fuse_conn_max_background_write': fs/fuse/control.c:128:23: warning: 'val' may be used uninitialized in this function [-Wuninitialized] fuse_conn_limit_write() will always return non-zero unless the &val is modified, so the warning is misleading. Let the compiler know about it by marking 'val' with 'uninitialized_var'. Signed-off-by: Daniel Mack Cc: Brian Foster Signed-off-by: Miklos Szeredi diff --git a/fs/fuse/control.c b/fs/fuse/control.c index 03ff5b1..75a20c0 100644 --- a/fs/fuse/control.c +++ b/fs/fuse/control.c @@ -117,7 +117,7 @@ static ssize_t fuse_conn_max_background_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - unsigned val; + unsigned uninitialized_var(val); ssize_t ret; ret = fuse_conn_limit_write(file, buf, count, ppos, &val, @@ -154,7 +154,7 @@ static ssize_t fuse_conn_congestion_threshold_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { - unsigned val; + unsigned uninitialized_var(val); ssize_t ret; ret = fuse_conn_limit_write(file, buf, count, ppos, &val, -- cgit v0.10.2 From e812347ccf9e8ce073b0ba0c49d03b124707b2b4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 2 Sep 2012 23:57:18 +0000 Subject: net: sock_edemux() should take care of timewait sockets sock_edemux() can handle either a regular socket or a timewait socket Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/sock.c b/net/core/sock.c index 8f67ced..7f64467 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1523,7 +1523,12 @@ EXPORT_SYMBOL(sock_rfree); void sock_edemux(struct sk_buff *skb) { - sock_put(skb->sk); + struct sock *sk = skb->sk; + + if (sk->sk_state == TCP_TIME_WAIT) + inet_twsk_put(inet_twsk(sk)); + else + sock_put(sk); } EXPORT_SYMBOL(sock_edemux); -- cgit v0.10.2 From 4c3a5bdae293f75cdf729c6c00124e8489af2276 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Mon, 3 Sep 2012 04:27:42 +0000 Subject: sctp: Don't charge for data in sndbuf again when transmitting packet SCTP charges wmem_alloc via sctp_set_owner_w() in sctp_sendmsg() and via skb_set_owner_w() in sctp_packet_transmit(). If a sender runs out of sndbuf it will sleep in sctp_wait_for_sndbuf() and expects to be waken up by __sctp_write_space(). Buffer space charged via sctp_set_owner_w() is released in sctp_wfree() which calls __sctp_write_space() directly. Buffer space charged via skb_set_owner_w() is released via sock_wfree() which calls sk->sk_write_space() _if_ SOCK_USE_WRITE_QUEUE is not set. sctp_endpoint_init() sets SOCK_USE_WRITE_QUEUE on all sockets. Therefore if sctp_packet_transmit() manages to queue up more than sndbuf bytes, sctp_wait_for_sndbuf() will never be woken up again unless it is interrupted by a signal. This could be fixed by clearing the SOCK_USE_WRITE_QUEUE flag but ... Charging for the data twice does not make sense in the first place, it leads to overcharging sndbuf by a factor 2. Therefore this patch only charges a single byte in wmem_alloc when transmitting an SCTP packet to ensure that the socket stays alive until the packet has been released. This means that control chunks are no longer accounted for in wmem_alloc which I believe is not a problem as skb->truesize will typically lead to overcharging anyway and thus compensates for any control overhead. Signed-off-by: Thomas Graf CC: Vlad Yasevich CC: Neil Horman CC: David Miller Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/output.c b/net/sctp/output.c index 838e18b..be50aa2 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -364,6 +364,25 @@ finish: return retval; } +static void sctp_packet_release_owner(struct sk_buff *skb) +{ + sk_free(skb->sk); +} + +static void sctp_packet_set_owner_w(struct sk_buff *skb, struct sock *sk) +{ + skb_orphan(skb); + skb->sk = sk; + skb->destructor = sctp_packet_release_owner; + + /* + * The data chunks have already been accounted for in sctp_sendmsg(), + * therefore only reserve a single byte to keep socket around until + * the packet has been transmitted. + */ + atomic_inc(&sk->sk_wmem_alloc); +} + /* All packets are sent to the network through this function from * sctp_outq_tail(). * @@ -405,7 +424,7 @@ int sctp_packet_transmit(struct sctp_packet *packet) /* Set the owning socket so that we know where to get the * destination IP address. */ - skb_set_owner_w(nskb, sk); + sctp_packet_set_owner_w(nskb, sk); if (!sctp_transport_dst_check(tp)) { sctp_transport_route(tp, NULL, sctp_sk(sk)); -- cgit v0.10.2 From 85e87870fa18ec9f5df98e2d3b48f3699560a570 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 2 Sep 2012 22:26:18 +0000 Subject: net: usbnet: fix softirq storm on suspend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Suspending an open usbnet device results in constant rescheduling of usbnet_bh. commit 65841fd5 "usbnet: handle remote wakeup asap" refactored the usbnet_bh code to allow sharing the urb allocate and submit code with usbnet_resume. In this process, a test for, and immediate return on, ENOLINK from rx_submit was unintentionally dropped. The rx queue will not grow if rx_submit fails, making usbnet_bh reschedule itself. This results in a softirq storm if the error is persistent. rx_submit translates the usb_submit_urb error EHOSTUNREACH into ENOLINK, so this is an expected and persistent error for a suspended device. The old code tested for this condition and avoided rescheduling. Putting this test back. Cc: # v3.5 Cc: Ming Lei Cc: Oliver Neukum Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c index fd4b26d..fc9f578 100644 --- a/drivers/net/usb/usbnet.c +++ b/drivers/net/usb/usbnet.c @@ -1201,19 +1201,26 @@ deferred: } EXPORT_SYMBOL_GPL(usbnet_start_xmit); -static void rx_alloc_submit(struct usbnet *dev, gfp_t flags) +static int rx_alloc_submit(struct usbnet *dev, gfp_t flags) { struct urb *urb; int i; + int ret = 0; /* don't refill the queue all at once */ for (i = 0; i < 10 && dev->rxq.qlen < RX_QLEN(dev); i++) { urb = usb_alloc_urb(0, flags); if (urb != NULL) { - if (rx_submit(dev, urb, flags) == -ENOLINK) - return; + ret = rx_submit(dev, urb, flags); + if (ret) + goto err; + } else { + ret = -ENOMEM; + goto err; } } +err: + return ret; } /*-------------------------------------------------------------------------*/ @@ -1257,7 +1264,8 @@ static void usbnet_bh (unsigned long param) int temp = dev->rxq.qlen; if (temp < RX_QLEN(dev)) { - rx_alloc_submit(dev, GFP_ATOMIC); + if (rx_alloc_submit(dev, GFP_ATOMIC) == -ENOLINK) + return; if (temp != dev->rxq.qlen) netif_dbg(dev, link, dev->net, "rxqlen %d --> %d\n", -- cgit v0.10.2 From 577650139062dcc20246da3f61e0bdafc65edf8f Mon Sep 17 00:00:00 2001 From: Vaibhav Hiremath Date: Mon, 3 Sep 2012 11:50:36 -0600 Subject: ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention With commit ae6df418a21f3a361c5f9b878e32a8aba4e17692 Sub: ARM: OMAP2+: dmtimer: cleanup fclk usage) The Timer functional clock naming convention has changed from gptX_fck => timerXfck, and so as the timer init function in mach-omap2/timer.c. OMAP4 clocktree also has changed accordingly. AM33xx Clock Tree has been merged during rc3-4 timeframe, before above commit got merged, so similar change is required for AM33xx as well (Change the gptX_fck => timerX_fck). Signed-off-by: Vaibhav Hiremath Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index 25bbcc7..ae27de8 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1036,13 +1036,13 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), CLK(NULL, "smartreflex1_fck", &smartreflex1_fck, CK_AM33XX), - CLK(NULL, "gpt1_fck", &timer1_fck, CK_AM33XX), - CLK(NULL, "gpt2_fck", &timer2_fck, CK_AM33XX), - CLK(NULL, "gpt3_fck", &timer3_fck, CK_AM33XX), - CLK(NULL, "gpt4_fck", &timer4_fck, CK_AM33XX), - CLK(NULL, "gpt5_fck", &timer5_fck, CK_AM33XX), - CLK(NULL, "gpt6_fck", &timer6_fck, CK_AM33XX), - CLK(NULL, "gpt7_fck", &timer7_fck, CK_AM33XX), + CLK(NULL, "timer1_fck", &timer1_fck, CK_AM33XX), + CLK(NULL, "timer2_fck", &timer2_fck, CK_AM33XX), + CLK(NULL, "timer3_fck", &timer3_fck, CK_AM33XX), + CLK(NULL, "timer4_fck", &timer4_fck, CK_AM33XX), + CLK(NULL, "timer5_fck", &timer5_fck, CK_AM33XX), + CLK(NULL, "timer6_fck", &timer6_fck, CK_AM33XX), + CLK(NULL, "timer7_fck", &timer7_fck, CK_AM33XX), CLK(NULL, "usbotg_fck", &usbotg_fck, CK_AM33XX), CLK(NULL, "ieee5000_fck", &ieee5000_fck, CK_AM33XX), CLK(NULL, "wdt1_fck", &wdt1_fck, CK_AM33XX), -- cgit v0.10.2 From bfb7dd25fcde96d08591258bc7e97500337a57ee Mon Sep 17 00:00:00 2001 From: Paul Walmsley Date: Mon, 3 Sep 2012 11:50:43 -0600 Subject: ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleep Commit 4da71ae6 ("OMAP: clockdomain: Arch specific funcs for clkdm_clk_enable/disable") called the OMAP2xxx-specific functions for clockdomain wakeup and sleep. This would probably have broken software-supervised clockdomain wakeup and sleep on OMAP3. Signed-off-by: Paul Walmsley Cc: Rajendra Nayak Cc: Jon Hunter Acked-by: Rajendra Nayak diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index a0d68db..f99e65c 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -241,6 +241,52 @@ static void omap3_clkdm_deny_idle(struct clockdomain *clkdm) _clkdm_del_autodeps(clkdm); } +static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_add_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP) + omap3_clkdm_wakeup(clkdm); + } + + return 0; +} + +static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) +{ + bool hwsup = false; + + if (!clkdm->clktrctrl_mask) + return 0; + + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, + clkdm->clktrctrl_mask); + + if (hwsup) { + /* Disable HW transitions when we are changing deps */ + _disable_hwsup(clkdm); + _clkdm_del_autodeps(clkdm); + _enable_hwsup(clkdm); + } else { + if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP) + omap3_clkdm_sleep(clkdm); + } + + return 0; +} + struct clkdm_ops omap2_clkdm_operations = { .clkdm_add_wkdep = omap2_clkdm_add_wkdep, .clkdm_del_wkdep = omap2_clkdm_del_wkdep, @@ -267,6 +313,6 @@ struct clkdm_ops omap3_clkdm_operations = { .clkdm_wakeup = omap3_clkdm_wakeup, .clkdm_allow_idle = omap3_clkdm_allow_idle, .clkdm_deny_idle = omap3_clkdm_deny_idle, - .clkdm_clk_enable = omap2_clkdm_clk_enable, - .clkdm_clk_disable = omap2_clkdm_clk_disable, + .clkdm_clk_enable = omap3xxx_clkdm_clk_enable, + .clkdm_clk_disable = omap3xxx_clkdm_clk_disable, }; -- cgit v0.10.2 From ed733619d85262439f625cc9d8b00cdaae761070 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 3 Sep 2012 11:50:52 -0600 Subject: ARM: OMAP3: hwmod data: fix iva2 reset info IVA2 hwmod resets were missing the status bit offsets. Also, as the hwmod itself didn't have prcm info at all, resetting iva hwmod was accessing some bogus memory addresses. Added both infos to fix this. Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/cm-regbits-34xx.h b/arch/arm/mach-omap2/cm-regbits-34xx.h index 766338f..975f6bd 100644 --- a/arch/arm/mach-omap2/cm-regbits-34xx.h +++ b/arch/arm/mach-omap2/cm-regbits-34xx.h @@ -67,6 +67,7 @@ #define OMAP3430_EN_IVA2_DPLL_MASK (0x7 << 0) /* CM_IDLEST_IVA2 */ +#define OMAP3430_ST_IVA2_SHIFT 0 #define OMAP3430_ST_IVA2_MASK (1 << 0) /* CM_IDLEST_PLL_IVA2 */ diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index c9e3820..ce7e606 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -100,9 +100,9 @@ static struct omap_hwmod omap3xxx_mpu_hwmod = { /* IVA2 (IVA2) */ static struct omap_hwmod_rst_info omap3xxx_iva_resets[] = { - { .name = "logic", .rst_shift = 0 }, - { .name = "seq0", .rst_shift = 1 }, - { .name = "seq1", .rst_shift = 2 }, + { .name = "logic", .rst_shift = 0, .st_shift = 8 }, + { .name = "seq0", .rst_shift = 1, .st_shift = 9 }, + { .name = "seq1", .rst_shift = 2, .st_shift = 10 }, }; static struct omap_hwmod omap3xxx_iva_hwmod = { @@ -112,6 +112,15 @@ static struct omap_hwmod omap3xxx_iva_hwmod = { .rst_lines = omap3xxx_iva_resets, .rst_lines_cnt = ARRAY_SIZE(omap3xxx_iva_resets), .main_clk = "iva2_ck", + .prcm = { + .omap2 = { + .module_offs = OMAP3430_IVA2_MOD, + .prcm_reg_id = 1, + .module_bit = OMAP3430_CM_FCLKEN_IVA2_EN_IVA2_SHIFT, + .idlest_reg_id = 1, + .idlest_idle_bit = OMAP3430_ST_IVA2_SHIFT, + } + }, }; /* timer class */ -- cgit v0.10.2 From 471a009b6db7670299a8674cd7fb2557c8c2797f Mon Sep 17 00:00:00 2001 From: Misael Lopez Cruz Date: Mon, 3 Sep 2012 11:50:52 -0600 Subject: ARM: OMAP: hwmod code: Disable module when hwmod enable fails Clock and module mode are explictly enable when hwmod is enabled. But if the hwmod doesn't get ready on time, clocks are disabled but module is left enabled. Signed-off-by: Misael Lopez Cruz Signed-off-by: Rajendra Nayak Cc: Paul Walmsley Cc: Benoit Cousson Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 6ca8e51..37afbd1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1889,6 +1889,7 @@ static int _enable(struct omap_hwmod *oh) _enable_sysc(oh); } } else { + _omap4_disable_module(oh); _disable_clocks(oh); pr_debug("omap_hwmod: %s: _wait_target_ready: %d\n", oh->name, r); -- cgit v0.10.2 From b360124ea008fcccf440840bde2c7f317bc31509 Mon Sep 17 00:00:00 2001 From: Tero Kristo Date: Mon, 3 Sep 2012 11:50:53 -0600 Subject: ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP block MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The OMAP4 sl2if IP block requires some special programming for it to enter idle. Without this programming, it will prevent the rest of the chip from entering full chip idle. This patch comments out the IP block data. Later, once the appropriate support is available, this patch can be reverted. Cc: Paul Walmsley Cc: Benoît Cousson Signed-off-by: Tero Kristo Signed-off-by: Paul Walmsley diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c index 242aee4..afb6091 100644 --- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c @@ -4210,7 +4210,7 @@ static struct omap_hwmod_ocp_if omap44xx_dsp__iva = { }; /* dsp -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_dsp__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_dsp__sl2if = { .master = &omap44xx_dsp_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -4828,7 +4828,7 @@ static struct omap_hwmod_ocp_if omap44xx_l3_main_2__iss = { }; /* iva -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_iva__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_iva__sl2if = { .master = &omap44xx_iva_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "dpll_iva_m5x2_ck", @@ -5362,7 +5362,7 @@ static struct omap_hwmod_ocp_if omap44xx_l4_wkup__scrm = { }; /* l3_main_2 -> sl2if */ -static struct omap_hwmod_ocp_if omap44xx_l3_main_2__sl2if = { +static struct omap_hwmod_ocp_if __maybe_unused omap44xx_l3_main_2__sl2if = { .master = &omap44xx_l3_main_2_hwmod, .slave = &omap44xx_sl2if_hwmod, .clk = "l3_div_ck", @@ -6032,7 +6032,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_abe__dmic, &omap44xx_l4_abe__dmic_dma, &omap44xx_dsp__iva, - &omap44xx_dsp__sl2if, + /* &omap44xx_dsp__sl2if, */ &omap44xx_l4_cfg__dsp, &omap44xx_l3_main_2__dss, &omap44xx_l4_per__dss, @@ -6068,7 +6068,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_per__i2c4, &omap44xx_l3_main_2__ipu, &omap44xx_l3_main_2__iss, - &omap44xx_iva__sl2if, + /* &omap44xx_iva__sl2if, */ &omap44xx_l3_main_2__iva, &omap44xx_l4_wkup__kbd, &omap44xx_l4_cfg__mailbox, @@ -6099,7 +6099,7 @@ static struct omap_hwmod_ocp_if *omap44xx_hwmod_ocp_ifs[] __initdata = { &omap44xx_l4_cfg__cm_core, &omap44xx_l4_wkup__prm, &omap44xx_l4_wkup__scrm, - &omap44xx_l3_main_2__sl2if, + /* &omap44xx_l3_main_2__sl2if, */ &omap44xx_l4_abe__slimbus1, &omap44xx_l4_abe__slimbus1_dma, &omap44xx_l4_per__slimbus2, -- cgit v0.10.2 From cab32f39dcc5b35db96497dc0a026b5dea76e4e7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Beno=C3=AEt=20Locher?= Date: Mon, 27 Aug 2012 15:02:45 +0200 Subject: can: mcp251x: avoid repeated frame bug MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The MCP2515 has a silicon bug causing repeated frame transmission, see section 5 of MCP2515 Rev. B Silicon Errata Revision G (March 2007). Basically, setting TXBnCTRL.TXREQ in either SPI mode (00 or 11) will eventually cause the bug. The workaround proposed by Microchip is to use mode 00 and send a RTS command on the SPI bus to initiate the transmission. Cc: Signed-off-by: Benoît Locher Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/mcp251x.c b/drivers/net/can/mcp251x.c index a580db2..26e7129 100644 --- a/drivers/net/can/mcp251x.c +++ b/drivers/net/can/mcp251x.c @@ -83,6 +83,11 @@ #define INSTRUCTION_LOAD_TXB(n) (0x40 + 2 * (n)) #define INSTRUCTION_READ_RXB(n) (((n) == 0) ? 0x90 : 0x94) #define INSTRUCTION_RESET 0xC0 +#define RTS_TXB0 0x01 +#define RTS_TXB1 0x02 +#define RTS_TXB2 0x04 +#define INSTRUCTION_RTS(n) (0x80 | ((n) & 0x07)) + /* MPC251x registers */ #define CANSTAT 0x0e @@ -397,6 +402,7 @@ static void mcp251x_hw_tx_frame(struct spi_device *spi, u8 *buf, static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame, int tx_buf_idx) { + struct mcp251x_priv *priv = dev_get_drvdata(&spi->dev); u32 sid, eid, exide, rtr; u8 buf[SPI_TRANSFER_BUF_LEN]; @@ -418,7 +424,10 @@ static void mcp251x_hw_tx(struct spi_device *spi, struct can_frame *frame, buf[TXBDLC_OFF] = (rtr << DLC_RTR_SHIFT) | frame->can_dlc; memcpy(buf + TXBDAT_OFF, frame->data, frame->can_dlc); mcp251x_hw_tx_frame(spi, buf, frame->can_dlc, tx_buf_idx); - mcp251x_write_reg(spi, TXBCTRL(tx_buf_idx), TXBCTRL_TXREQ); + + /* use INSTRUCTION_RTS, to avoid "repeated frame problem" */ + priv->spi_tx_buf[0] = INSTRUCTION_RTS(1 << tx_buf_idx); + mcp251x_spi_trans(priv->spi, 1); } static void mcp251x_hw_rx_frame(struct spi_device *spi, u8 *buf, -- cgit v0.10.2 From b379135c40163ae79ba7a54e6928b53983e74ee8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 1 Sep 2012 03:19:57 +0000 Subject: fq_codel: dont reinit flow state When fq_codel builds a new flow, it should not reset codel state. Codel algo needs to get previous values (lastcount, drop_next) to get proper behavior. Signed-off-by: Dave Taht Signed-off-by: Eric Dumazet Acked-by: Dave Taht Signed-off-by: David S. Miller diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c index 9fc1c62..4e606fc 100644 --- a/net/sched/sch_fq_codel.c +++ b/net/sched/sch_fq_codel.c @@ -191,7 +191,6 @@ static int fq_codel_enqueue(struct sk_buff *skb, struct Qdisc *sch) if (list_empty(&flow->flowchain)) { list_add_tail(&flow->flowchain, &q->new_flows); - codel_vars_init(&flow->cvars); q->new_flow_count++; flow->deficit = q->quantum; flow->dropped = 0; @@ -418,6 +417,7 @@ static int fq_codel_init(struct Qdisc *sch, struct nlattr *opt) struct fq_codel_flow *flow = q->flows + i; INIT_LIST_HEAD(&flow->flowchain); + codel_vars_init(&flow->cvars); } } if (sch->limit >= 1) -- cgit v0.10.2 From 28dcc2d60cb570d9f549c329b2f51400553412a1 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 3 Sep 2012 16:25:12 +0300 Subject: drm/i915: do not expose a dysfunctional backlight interface to userspace Previously intel_panel_setup_backlight() would create a sysfs backlight interface with max brightness of 1 if it was unable to figure out the max backlight brightness. This rendered the backlight interface useless. Do not create a dysfunctional backlight interface to begin with. Signed-off-by: Jani Nikula Tested-by: David Woodhouse Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_panel.c b/drivers/gpu/drm/i915/intel_panel.c index 3df4f5f..e019b23 100644 --- a/drivers/gpu/drm/i915/intel_panel.c +++ b/drivers/gpu/drm/i915/intel_panel.c @@ -162,19 +162,12 @@ static u32 i915_read_blc_pwm_ctl(struct drm_i915_private *dev_priv) return val; } -u32 intel_panel_get_max_backlight(struct drm_device *dev) +static u32 _intel_panel_get_max_backlight(struct drm_device *dev) { struct drm_i915_private *dev_priv = dev->dev_private; u32 max; max = i915_read_blc_pwm_ctl(dev_priv); - if (max == 0) { - /* XXX add code here to query mode clock or hardware clock - * and program max PWM appropriately. - */ - pr_warn_once("fixme: max PWM is zero\n"); - return 1; - } if (HAS_PCH_SPLIT(dev)) { max >>= 16; @@ -188,6 +181,22 @@ u32 intel_panel_get_max_backlight(struct drm_device *dev) max *= 0xff; } + return max; +} + +u32 intel_panel_get_max_backlight(struct drm_device *dev) +{ + u32 max; + + max = _intel_panel_get_max_backlight(dev); + if (max == 0) { + /* XXX add code here to query mode clock or hardware clock + * and program max PWM appropriately. + */ + pr_warn_once("fixme: max PWM is zero\n"); + return 1; + } + DRM_DEBUG_DRIVER("max backlight PWM = %d\n", max); return max; } @@ -424,7 +433,11 @@ int intel_panel_setup_backlight(struct drm_device *dev) memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_RAW; - props.max_brightness = intel_panel_get_max_backlight(dev); + props.max_brightness = _intel_panel_get_max_backlight(dev); + if (props.max_brightness == 0) { + DRM_ERROR("Failed to get maximum backlight value\n"); + return -ENODEV; + } dev_priv->backlight = backlight_device_register("intel_backlight", &connector->kdev, dev, -- cgit v0.10.2 From 9fef76857feed8e94ca3a5ee37db644f04a9488b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 3 Sep 2012 15:31:00 +0800 Subject: mISDN: fix possible memory leak in hfcmulti_init() hc has been allocated in this function and missing free it before leaving from some error handling cases. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/drivers/isdn/hardware/mISDN/hfcmulti.c b/drivers/isdn/hardware/mISDN/hfcmulti.c index 5e402cf..f027942 100644 --- a/drivers/isdn/hardware/mISDN/hfcmulti.c +++ b/drivers/isdn/hardware/mISDN/hfcmulti.c @@ -5059,6 +5059,7 @@ hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, printk(KERN_INFO "HFC-E1 #%d has overlapping B-channels on fragment #%d\n", E1_cnt + 1, pt); + kfree(hc); return -EINVAL; } maskcheck |= hc->bmask[pt]; @@ -5086,6 +5087,7 @@ hfcmulti_init(struct hm_map *m, struct pci_dev *pdev, if ((poll >> 1) > sizeof(hc->silence_data)) { printk(KERN_ERR "HFCMULTI error: silence_data too small, " "please fix\n"); + kfree(hc); return -EINVAL; } for (i = 0; i < (poll >> 1); i++) -- cgit v0.10.2 From 156bddd8e505b295540f3ca0e27dda68cb0d49aa Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 3 Sep 2012 16:50:42 +0200 Subject: ext3: Fix fdatasync() for files with only i_size changes Code tracking when transaction needs to be committed on fdatasync(2) forgets to handle a situation when only inode's i_size is changed. Thus in such situations fdatasync(2) doesn't force transaction with new i_size to disk and that can result in wrong i_size after a crash. Fix the issue by updating inode's i_datasync_tid whenever its size is updated. CC: # >= 2.6.32 Reported-by: Kristian Nielsen Signed-off-by: Jan Kara diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index a075973..ff574b4 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -3072,6 +3072,8 @@ static int ext3_do_update_inode(handle_t *handle, struct ext3_inode_info *ei = EXT3_I(inode); struct buffer_head *bh = iloc->bh; int err = 0, rc, block; + int need_datasync = 0; + __le32 disksize; uid_t i_uid; gid_t i_gid; @@ -3113,7 +3115,11 @@ again: raw_inode->i_gid_high = 0; } raw_inode->i_links_count = cpu_to_le16(inode->i_nlink); - raw_inode->i_size = cpu_to_le32(ei->i_disksize); + disksize = cpu_to_le32(ei->i_disksize); + if (disksize != raw_inode->i_size) { + need_datasync = 1; + raw_inode->i_size = disksize; + } raw_inode->i_atime = cpu_to_le32(inode->i_atime.tv_sec); raw_inode->i_ctime = cpu_to_le32(inode->i_ctime.tv_sec); raw_inode->i_mtime = cpu_to_le32(inode->i_mtime.tv_sec); @@ -3129,8 +3135,11 @@ again: if (!S_ISREG(inode->i_mode)) { raw_inode->i_dir_acl = cpu_to_le32(ei->i_dir_acl); } else { - raw_inode->i_size_high = - cpu_to_le32(ei->i_disksize >> 32); + disksize = cpu_to_le32(ei->i_disksize >> 32); + if (disksize != raw_inode->i_size_high) { + raw_inode->i_size_high = disksize; + need_datasync = 1; + } if (ei->i_disksize > 0x7fffffffULL) { struct super_block *sb = inode->i_sb; if (!EXT3_HAS_RO_COMPAT_FEATURE(sb, @@ -3183,6 +3192,8 @@ again: ext3_clear_inode_state(inode, EXT3_STATE_NEW); atomic_set(&ei->i_sync_tid, handle->h_transaction->t_tid); + if (need_datasync) + atomic_set(&ei->i_datasync_tid, handle->h_transaction->t_tid); out_brelse: brelse (bh); ext3_std_error(inode->i_sb, err); -- cgit v0.10.2 From c303aa94cdae483a7577230e61720e126e600a52 Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Mon, 3 Sep 2012 19:06:27 -0700 Subject: openvswitch: Fix FLOW_BUFSIZE definition. The vlan encapsulation fields in the maximum flow defintion were never updated when the representation changed before upstreaming. In theory this could cause a kernel panic when a maximum length flow is used. In practice this has never happened (to my knowledge) because skb allocations are padded out to a cache line so you would need the right combination of flow and packet being sent to userspace. Signed-off-by: Jesse Gross diff --git a/net/openvswitch/flow.h b/net/openvswitch/flow.h index 9b75617..c30df1a 100644 --- a/net/openvswitch/flow.h +++ b/net/openvswitch/flow.h @@ -145,15 +145,17 @@ u64 ovs_flow_used_time(unsigned long flow_jiffies); * OVS_KEY_ATTR_PRIORITY 4 -- 4 8 * OVS_KEY_ATTR_IN_PORT 4 -- 4 8 * OVS_KEY_ATTR_ETHERNET 12 -- 4 16 + * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (outer VLAN ethertype) * OVS_KEY_ATTR_8021Q 4 -- 4 8 - * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 + * OVS_KEY_ATTR_ENCAP 0 -- 4 4 (VLAN encapsulation) + * OVS_KEY_ATTR_ETHERTYPE 2 2 4 8 (inner VLAN ethertype) * OVS_KEY_ATTR_IPV6 40 -- 4 44 * OVS_KEY_ATTR_ICMPV6 2 2 4 8 * OVS_KEY_ATTR_ND 28 -- 4 32 * ------------------------------------------------- - * total 132 + * total 144 */ -#define FLOW_BUFSIZE 132 +#define FLOW_BUFSIZE 144 int ovs_flow_to_nlattrs(const struct sw_flow_key *, struct sk_buff *); int ovs_flow_from_nlattrs(struct sw_flow_key *swkey, int *key_lenp, -- cgit v0.10.2 From f319da0c6894fcf55e21320e40506418a2aad629 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Mon, 20 Aug 2012 11:26:57 +0200 Subject: sched: Fix load avg vs cpu-hotplug Rabik and Paul reported two different issues related to the same few lines of code. Rabik's issue is that the nr_uninterruptible migration code is wrong in that he sees artifacts due to this (Rabik please do expand in more detail). Paul's issue is that this code as it stands relies on us using stop_machine() for unplug, we all would like to remove this assumption so that eventually we can remove this stop_machine() usage altogether. The only reason we'd have to migrate nr_uninterruptible is so that we could use for_each_online_cpu() loops in favour of for_each_possible_cpu() loops, however since nr_uninterruptible() is the only such loop and its using possible lets not bother at all. The problem Rabik sees is (probably) caused by the fact that by migrating nr_uninterruptible we screw rq->calc_load_active for both rqs involved. So don't bother with fancy migration schemes (meaning we now have to keep using for_each_possible_cpu()) and instead fold any nr_active delta after we migrate all tasks away to make sure we don't have any skewed nr_active accounting. Reported-by: Rakib Mullick Reported-by: Paul E. McKenney Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1345454817.23018.27.camel@twins Signed-off-by: Ingo Molnar diff --git a/kernel/sched/core.c b/kernel/sched/core.c index fbf1fd0..207a81c 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5304,27 +5304,17 @@ void idle_task_exit(void) } /* - * While a dead CPU has no uninterruptible tasks queued at this point, - * it might still have a nonzero ->nr_uninterruptible counter, because - * for performance reasons the counter is not stricly tracking tasks to - * their home CPUs. So we just add the counter to another CPU's counter, - * to keep the global sum constant after CPU-down: - */ -static void migrate_nr_uninterruptible(struct rq *rq_src) -{ - struct rq *rq_dest = cpu_rq(cpumask_any(cpu_active_mask)); - - rq_dest->nr_uninterruptible += rq_src->nr_uninterruptible; - rq_src->nr_uninterruptible = 0; -} - -/* - * remove the tasks which were accounted by rq from calc_load_tasks. + * Since this CPU is going 'away' for a while, fold any nr_active delta + * we might have. Assumes we're called after migrate_tasks() so that the + * nr_active count is stable. + * + * Also see the comment "Global load-average calculations". */ -static void calc_global_load_remove(struct rq *rq) +static void calc_load_migrate(struct rq *rq) { - atomic_long_sub(rq->calc_load_active, &calc_load_tasks); - rq->calc_load_active = 0; + long delta = calc_load_fold_active(rq); + if (delta) + atomic_long_add(delta, &calc_load_tasks); } /* @@ -5618,8 +5608,7 @@ migration_call(struct notifier_block *nfb, unsigned long action, void *hcpu) BUG_ON(rq->nr_running != 1); /* the migration thread */ raw_spin_unlock_irqrestore(&rq->lock, flags); - migrate_nr_uninterruptible(rq); - calc_global_load_remove(rq); + calc_load_migrate(rq); break; #endif } -- cgit v0.10.2 From 749c8814f08f12baa4a9c2812a7c6ede7d69507d Mon Sep 17 00:00:00 2001 From: Charles Wang Date: Mon, 20 Aug 2012 16:02:33 +0800 Subject: sched: Add missing call to calc_load_exit_idle() Azat Khuzhin reported high loadavg in Linux v3.6 After checking the upstream scheduler code, I found Peter's commit: 5167e8d5417b sched/nohz: Rewrite and fix load-avg computation -- again not fully applied, missing the call to calc_load_exit_idle(). After that idle exit in sampling window will always be calculated to non-idle, and the load will be higher than normal. This patch adds the missing call to calc_load_exit_idle(). Signed-off-by: Charles Wang Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/1345449754-27130-1-git-send-email-muming.wq@gmail.com Signed-off-by: Ingo Molnar diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 024540f..3a9e5d5 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -573,6 +573,7 @@ static void tick_nohz_restart_sched_tick(struct tick_sched *ts, ktime_t now) tick_do_update_jiffies64(now); update_cpu_load_nohz(); + calc_load_exit_idle(); touch_softlockup_watchdog(); /* * Cancel the scheduled timer and restore the tick -- cgit v0.10.2 From a4c96ae319b8047f62dedbe1eac79e321c185749 Mon Sep 17 00:00:00 2001 From: Peter Boonstoppel Date: Thu, 9 Aug 2012 15:34:47 -0700 Subject: sched: Unthrottle rt runqueues in __disable_runtime() migrate_tasks() uses _pick_next_task_rt() to get tasks from the real-time runqueues to be migrated. When rt_rq is throttled _pick_next_task_rt() won't return anything, in which case migrate_tasks() can't move all threads over and gets stuck in an infinite loop. Instead unthrottle rt runqueues before migrating tasks. Additionally: move unthrottle_offline_cfs_rqs() to rq_offline_fair() Signed-off-by: Peter Boonstoppel Signed-off-by: Peter Zijlstra Cc: Paul Turner Link: http://lkml.kernel.org/r/5FBF8E85CA34454794F0F7ECBA79798F379D3648B7@HQMAIL04.nvidia.com Signed-off-by: Ingo Molnar diff --git a/kernel/sched/core.c b/kernel/sched/core.c index 207a81c..a4ea245 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -5342,9 +5342,6 @@ static void migrate_tasks(unsigned int dead_cpu) */ rq->stop = NULL; - /* Ensure any throttled groups are reachable by pick_next_task */ - unthrottle_offline_cfs_rqs(rq); - for ( ; ; ) { /* * There's this thread running, bail when that's the only diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index c219bf8..86ad83c 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2052,7 +2052,7 @@ static void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b) hrtimer_cancel(&cfs_b->slack_timer); } -void unthrottle_offline_cfs_rqs(struct rq *rq) +static void unthrottle_offline_cfs_rqs(struct rq *rq) { struct cfs_rq *cfs_rq; @@ -2106,7 +2106,7 @@ static inline struct cfs_bandwidth *tg_cfs_bandwidth(struct task_group *tg) return NULL; } static inline void destroy_cfs_bandwidth(struct cfs_bandwidth *cfs_b) {} -void unthrottle_offline_cfs_rqs(struct rq *rq) {} +static inline void unthrottle_offline_cfs_rqs(struct rq *rq) {} #endif /* CONFIG_CFS_BANDWIDTH */ @@ -4956,6 +4956,9 @@ static void rq_online_fair(struct rq *rq) static void rq_offline_fair(struct rq *rq) { update_sysctl(); + + /* Ensure any throttled groups are reachable by pick_next_task */ + unthrottle_offline_cfs_rqs(rq); } #endif /* CONFIG_SMP */ diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c index 944cb68..e0b7ba9 100644 --- a/kernel/sched/rt.c +++ b/kernel/sched/rt.c @@ -691,6 +691,7 @@ balanced: * runtime - in which case borrowing doesn't make sense. */ rt_rq->rt_runtime = RUNTIME_INF; + rt_rq->rt_throttled = 0; raw_spin_unlock(&rt_rq->rt_runtime_lock); raw_spin_unlock(&rt_b->rt_runtime_lock); } diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h index f6714d0..0848fa3 100644 --- a/kernel/sched/sched.h +++ b/kernel/sched/sched.h @@ -1144,7 +1144,6 @@ extern void print_rt_stats(struct seq_file *m, int cpu); extern void init_cfs_rq(struct cfs_rq *cfs_rq); extern void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq); -extern void unthrottle_offline_cfs_rqs(struct rq *rq); extern void account_cfs_bandwidth_used(int enabled, int was_enabled); -- cgit v0.10.2 From 9450d57eab5cad36774c297da123062744472588 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sat, 18 Aug 2012 17:45:08 -0700 Subject: sched: Fix kernel-doc warnings in kernel/sched/fair.c Fix two kernel-doc warnings in kernel/sched/fair.c: Warning(kernel/sched/fair.c:3660): Excess function parameter 'cpus' description in 'update_sg_lb_stats' Warning(kernel/sched/fair.c:3806): Excess function parameter 'cpus' description in 'update_sd_lb_stats' Signed-off-by: Randy Dunlap Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/50303714.3090204@xenotime.net Signed-off-by: Ingo Molnar diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 86ad83c..42d9df6 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -3658,7 +3658,6 @@ fix_small_capacity(struct sched_domain *sd, struct sched_group *group) * @group: sched_group whose statistics are to be updated. * @load_idx: Load index of sched_domain of this_cpu for load calc. * @local_group: Does group contain this_cpu. - * @cpus: Set of cpus considered for load balancing. * @balance: Should we balance. * @sgs: variable to hold the statistics for this group. */ @@ -3805,7 +3804,6 @@ static bool update_sd_pick_busiest(struct lb_env *env, /** * update_sd_lb_stats - Update sched_domain's statistics for load balancing. * @env: The load balancing environment. - * @cpus: Set of cpus considered for load balancing. * @balance: Should we balance. * @sds: variable to hold the statistics for this sched_domain. */ -- cgit v0.10.2 From 749c59fd15b2c18dd6c15c353a899fb6ac49b865 Mon Sep 17 00:00:00 2001 From: Jamie Iles Date: Thu, 30 Aug 2012 11:32:13 +0100 Subject: KVM: PIC: fix use of uninitialised variable. Commit aea218f3cbbc (KVM: PIC: call ack notifiers for irqs that are dropped form irr) used an uninitialised variable to track whether an appropriate apic had been found. This could result in calling the ack notifier incorrectly. Cc: Gleb Natapov Cc: Avi Kivity Signed-off-by: Jamie Iles Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/i8259.c b/arch/x86/kvm/i8259.c index e498b18..9fc9aa7 100644 --- a/arch/x86/kvm/i8259.c +++ b/arch/x86/kvm/i8259.c @@ -318,7 +318,7 @@ static void pic_ioport_write(void *opaque, u32 addr, u32 val) if (val & 0x10) { u8 edge_irr = s->irr & ~s->elcr; int i; - bool found; + bool found = false; struct kvm_vcpu *vcpu; s->init4 = val & 1; -- cgit v0.10.2 From 3d2abdfdf14f4d6decc2023708211e19b096f4ca Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 4 Sep 2012 17:44:45 +0300 Subject: mac80211: clear bssid on auth/assoc failure ifmgd->bssid wasn't cleared properly in some auth/assoc failure cases, causing mac80211 and the low-level driver to go out of sync. Clear ifmgd->bssid on failure, and notify the driver. Cc: stable@kernel.org # 3.4+ Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a4a5acd..f76b833 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3248,6 +3248,8 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, goto out_unlock; err_clear: + memset(ifmgd->bssid, 0, ETH_ALEN); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); ifmgd->auth_data = NULL; err_free: kfree(auth_data); @@ -3439,6 +3441,8 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, err = 0; goto out; err_clear: + memset(ifmgd->bssid, 0, ETH_ALEN); + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BSSID); ifmgd->assoc_data = NULL; err_free: kfree(assoc_data); -- cgit v0.10.2 From a6fa941d94b411bbd2b6421ffbde6db3c93e65ab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 20 Aug 2012 14:59:25 +0100 Subject: perf_event: Switch to internal refcount, fix race with close() Don't mess with file refcounts (or keep a reference to file, for that matter) in perf_event. Use explicit refcount of its own instead. Deal with the race between the final reference to event going away and new children getting created for it by use of atomic_long_inc_not_zero() in inherit_event(); just have the latter free what it had allocated and return NULL, that works out just fine (children of siblings of something doomed are created as singletons, same as if the child of leader had been created and immediately killed). Signed-off-by: Al Viro Cc: stable@kernel.org Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120820135925.GG23464@ZenIV.linux.org.uk Signed-off-by: Ingo Molnar diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 7602ccb..ad04dfc 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -926,7 +926,7 @@ struct perf_event { struct hw_perf_event hw; struct perf_event_context *ctx; - struct file *filp; + atomic_long_t refcount; /* * These accumulate total time (in nanoseconds) that children diff --git a/kernel/events/core.c b/kernel/events/core.c index b7935fc..efef428 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -2935,12 +2935,12 @@ EXPORT_SYMBOL_GPL(perf_event_release_kernel); /* * Called when the last reference to the file is gone. */ -static int perf_release(struct inode *inode, struct file *file) +static void put_event(struct perf_event *event) { - struct perf_event *event = file->private_data; struct task_struct *owner; - file->private_data = NULL; + if (!atomic_long_dec_and_test(&event->refcount)) + return; rcu_read_lock(); owner = ACCESS_ONCE(event->owner); @@ -2975,7 +2975,13 @@ static int perf_release(struct inode *inode, struct file *file) put_task_struct(owner); } - return perf_event_release_kernel(event); + perf_event_release_kernel(event); +} + +static int perf_release(struct inode *inode, struct file *file) +{ + put_event(file->private_data); + return 0; } u64 perf_event_read_value(struct perf_event *event, u64 *enabled, u64 *running) @@ -3227,7 +3233,7 @@ unlock: static const struct file_operations perf_fops; -static struct perf_event *perf_fget_light(int fd, int *fput_needed) +static struct file *perf_fget_light(int fd, int *fput_needed) { struct file *file; @@ -3241,7 +3247,7 @@ static struct perf_event *perf_fget_light(int fd, int *fput_needed) return ERR_PTR(-EBADF); } - return file->private_data; + return file; } static int perf_event_set_output(struct perf_event *event, @@ -3273,19 +3279,21 @@ static long perf_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case PERF_EVENT_IOC_SET_OUTPUT: { + struct file *output_file = NULL; struct perf_event *output_event = NULL; int fput_needed = 0; int ret; if (arg != -1) { - output_event = perf_fget_light(arg, &fput_needed); - if (IS_ERR(output_event)) - return PTR_ERR(output_event); + output_file = perf_fget_light(arg, &fput_needed); + if (IS_ERR(output_file)) + return PTR_ERR(output_file); + output_event = output_file->private_data; } ret = perf_event_set_output(event, output_event); if (output_event) - fput_light(output_event->filp, fput_needed); + fput_light(output_file, fput_needed); return ret; } @@ -5950,6 +5958,7 @@ perf_event_alloc(struct perf_event_attr *attr, int cpu, mutex_init(&event->mmap_mutex); + atomic_long_set(&event->refcount, 1); event->cpu = cpu; event->attr = *attr; event->group_leader = group_leader; @@ -6260,12 +6269,12 @@ SYSCALL_DEFINE5(perf_event_open, return event_fd; if (group_fd != -1) { - group_leader = perf_fget_light(group_fd, &fput_needed); - if (IS_ERR(group_leader)) { - err = PTR_ERR(group_leader); + group_file = perf_fget_light(group_fd, &fput_needed); + if (IS_ERR(group_file)) { + err = PTR_ERR(group_file); goto err_fd; } - group_file = group_leader->filp; + group_leader = group_file->private_data; if (flags & PERF_FLAG_FD_OUTPUT) output_event = group_leader; if (flags & PERF_FLAG_FD_NO_GROUP) @@ -6402,7 +6411,6 @@ SYSCALL_DEFINE5(perf_event_open, put_ctx(gctx); } - event->filp = event_file; WARN_ON_ONCE(ctx->parent_ctx); mutex_lock(&ctx->mutex); @@ -6496,7 +6504,6 @@ perf_event_create_kernel_counter(struct perf_event_attr *attr, int cpu, goto err_free; } - event->filp = NULL; WARN_ON_ONCE(ctx->parent_ctx); mutex_lock(&ctx->mutex); perf_install_in_context(ctx, event, cpu); @@ -6578,7 +6585,7 @@ static void sync_child_event(struct perf_event *child_event, * Release the parent event, if this was the last * reference to it. */ - fput(parent_event->filp); + put_event(parent_event); } static void @@ -6654,9 +6661,8 @@ static void perf_event_exit_task_context(struct task_struct *child, int ctxn) * * __perf_event_exit_task() * sync_child_event() - * fput(parent_event->filp) - * perf_release() - * mutex_lock(&ctx->mutex) + * put_event() + * mutex_lock(&ctx->mutex) * * But since its the parent context it won't be the same instance. */ @@ -6724,7 +6730,7 @@ static void perf_free_event(struct perf_event *event, list_del_init(&event->child_list); mutex_unlock(&parent->child_mutex); - fput(parent->filp); + put_event(parent); perf_group_detach(event); list_del_event(event, ctx); @@ -6804,6 +6810,12 @@ inherit_event(struct perf_event *parent_event, NULL, NULL); if (IS_ERR(child_event)) return child_event; + + if (!atomic_long_inc_not_zero(&parent_event->refcount)) { + free_event(child_event); + return NULL; + } + get_ctx(child_ctx); /* @@ -6845,14 +6857,6 @@ inherit_event(struct perf_event *parent_event, raw_spin_unlock_irqrestore(&child_ctx->lock, flags); /* - * Get a reference to the parent filp - we will fput it - * when the child event exits. This is safe to do because - * we are in the parent and we know that the filp still - * exists and has a nonzero count: - */ - atomic_long_inc(&parent_event->filp->f_count); - - /* * Link this into the parent event's child list */ WARN_ON_ONCE(parent_event->ctx->parent_ctx); -- cgit v0.10.2 From 3ec18cd8b8f8395d0df604c62ab3bc2cf3a966b4 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Mon, 20 Aug 2012 11:24:21 +0200 Subject: perf/x86: Enable Intel Cedarview Atom suppport This patch enables perf_events support for Intel Cedarview Atom (model 54) processors. Support includes PEBS and LBR. Tested on my Atom N2600 netbook. Signed-off-by: Stephane Eranian Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120820092421.GA11284@quad Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 7f2739e..0d3d63a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -2008,6 +2008,7 @@ __init int intel_pmu_init(void) break; case 28: /* Atom */ + case 54: /* Cedariew */ memcpy(hw_cache_event_ids, atom_hw_cache_event_ids, sizeof(hw_cache_event_ids)); diff --git a/arch/x86/kernel/cpu/perf_event_intel_lbr.c b/arch/x86/kernel/cpu/perf_event_intel_lbr.c index 520b426..da02e9c 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_lbr.c +++ b/arch/x86/kernel/cpu/perf_event_intel_lbr.c @@ -686,7 +686,8 @@ void intel_pmu_lbr_init_atom(void) * to have an operational LBR which can freeze * on PMU interrupt */ - if (boot_cpu_data.x86_mask < 10) { + if (boot_cpu_data.x86_model == 28 + && boot_cpu_data.x86_mask < 10) { pr_cont("LBR disabled due to erratum"); return; } -- cgit v0.10.2 From 500ad2d8b01390c98bc6dce068bccfa9534b8212 Mon Sep 17 00:00:00 2001 From: "K.Prasad" Date: Thu, 2 Aug 2012 13:46:35 +0530 Subject: perf/hwpb: Invoke __perf_event_disable() if interrupts are already disabled While debugging a warning message on PowerPC while using hardware breakpoints, it was discovered that when perf_event_disable is invoked through hw_breakpoint_handler function with interrupts disabled, a subsequent IPI in the code path would trigger a WARN_ON_ONCE message in smp_call_function_single function. This patch calls __perf_event_disable() when interrupts are already disabled, instead of perf_event_disable(). Reported-by: Edjunior Barbosa Machado Signed-off-by: K.Prasad [naveen.n.rao@linux.vnet.ibm.com: v3: Check to make sure we target current task] Signed-off-by: Naveen N. Rao Acked-by: Frederic Weisbecker Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120802081635.5811.17737.stgit@localhost.localdomain [ Fixed build error on MIPS. ] Signed-off-by: Ingo Molnar diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index ad04dfc..33ed9d6 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -1296,6 +1296,7 @@ extern int perf_swevent_get_recursion_context(void); extern void perf_swevent_put_recursion_context(int rctx); extern void perf_event_enable(struct perf_event *event); extern void perf_event_disable(struct perf_event *event); +extern int __perf_event_disable(void *info); extern void perf_event_task_tick(void); #else static inline void @@ -1334,6 +1335,7 @@ static inline int perf_swevent_get_recursion_context(void) { return -1; } static inline void perf_swevent_put_recursion_context(int rctx) { } static inline void perf_event_enable(struct perf_event *event) { } static inline void perf_event_disable(struct perf_event *event) { } +static inline int __perf_event_disable(void *info) { return -1; } static inline void perf_event_task_tick(void) { } #endif diff --git a/kernel/events/core.c b/kernel/events/core.c index efef428..7fee567 100644 --- a/kernel/events/core.c +++ b/kernel/events/core.c @@ -1253,7 +1253,7 @@ retry: /* * Cross CPU call to disable a performance event */ -static int __perf_event_disable(void *info) +int __perf_event_disable(void *info) { struct perf_event *event = info; struct perf_event_context *ctx = event->ctx; diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c index bb38c4d..9a7b487 100644 --- a/kernel/events/hw_breakpoint.c +++ b/kernel/events/hw_breakpoint.c @@ -453,7 +453,16 @@ int modify_user_hw_breakpoint(struct perf_event *bp, struct perf_event_attr *att int old_type = bp->attr.bp_type; int err = 0; - perf_event_disable(bp); + /* + * modify_user_hw_breakpoint can be invoked with IRQs disabled and hence it + * will not be possible to raise IPIs that invoke __perf_event_disable. + * So call the function directly after making sure we are targeting the + * current task. + */ + if (irqs_disabled() && bp->ctx && bp->ctx->task == current) + __perf_event_disable(bp); + else + perf_event_disable(bp); bp->attr.bp_addr = attr->bp_addr; bp->attr.bp_type = attr->bp_type; -- cgit v0.10.2 From b4e4f47e940bc93c5b1125a4429ff53956754800 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 2 Sep 2012 21:41:04 +0800 Subject: nl80211: fix possible memory leak nl80211_connect() connkeys is malloced in nl80211_parse_connkeys() and should be freed in the error handling case, otherwise it will cause memory leak. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Johannes Berg diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 97026f3..1e37dbf 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -5633,8 +5633,10 @@ static int nl80211_connect(struct sk_buff *skb, struct genl_info *info) sizeof(connect.ht_capa_mask)); if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) { - if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]) + if (!info->attrs[NL80211_ATTR_HT_CAPABILITY_MASK]) { + kfree(connkeys); return -EINVAL; + } memcpy(&connect.ht_capa, nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]), sizeof(connect.ht_capa)); -- cgit v0.10.2 From c9e67d483776d8d2a5f3f70491161b205930ffe1 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 4 Sep 2012 18:45:54 +0200 Subject: fuse: fix retrieve length In some cases fuse_retrieve() would return a short byte count if offset was non-zero. The data returned was correct, though. Signed-off-by: Miklos Szeredi Cc: stable@vger.kernel.org diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index 7df2b5e..f4246cf 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -1576,6 +1576,7 @@ static int fuse_retrieve(struct fuse_conn *fc, struct inode *inode, req->pages[req->num_pages] = page; req->num_pages++; + offset = 0; num -= this_num; total_len += this_num; index++; -- cgit v0.10.2 From 6cf5c951175abcec4da470c50565cc0afe6cd11d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Sep 2012 04:13:18 +0000 Subject: netrom: copy_datagram_iovec can fail Check for an error from this and if so bail properly. Signed-off-by: Alan Cox Signed-off-by: David S. Miller diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 06592d8..1b9024e 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -1169,7 +1169,12 @@ static int nr_recvmsg(struct kiocb *iocb, struct socket *sock, msg->msg_flags |= MSG_TRUNC; } - skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied); + er = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, copied); + if (er < 0) { + skb_free_datagram(sk, skb); + release_sock(sk); + return er; + } if (sax != NULL) { sax->sax25_family = AF_NETROM; -- cgit v0.10.2 From 37159ef2c1ae1e696b24b260b241209a19f92c60 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 4 Sep 2012 07:18:57 +0000 Subject: l2tp: fix a lockdep splat Fixes following lockdep splat : [ 1614.734896] ============================================= [ 1614.734898] [ INFO: possible recursive locking detected ] [ 1614.734901] 3.6.0-rc3+ #782 Not tainted [ 1614.734903] --------------------------------------------- [ 1614.734905] swapper/11/0 is trying to acquire lock: [ 1614.734907] (slock-AF_INET){+.-...}, at: [] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.734920] [ 1614.734920] but task is already holding lock: [ 1614.734922] (slock-AF_INET){+.-...}, at: [] tcp_v4_err+0x163/0x6b0 [ 1614.734932] [ 1614.734932] other info that might help us debug this: [ 1614.734935] Possible unsafe locking scenario: [ 1614.734935] [ 1614.734937] CPU0 [ 1614.734938] ---- [ 1614.734940] lock(slock-AF_INET); [ 1614.734943] lock(slock-AF_INET); [ 1614.734946] [ 1614.734946] *** DEADLOCK *** [ 1614.734946] [ 1614.734949] May be due to missing lock nesting notation [ 1614.734949] [ 1614.734952] 7 locks held by swapper/11/0: [ 1614.734954] #0: (rcu_read_lock){.+.+..}, at: [] __netif_receive_skb+0x251/0xd00 [ 1614.734964] #1: (rcu_read_lock){.+.+..}, at: [] ip_local_deliver_finish+0x4c/0x4e0 [ 1614.734972] #2: (rcu_read_lock){.+.+..}, at: [] icmp_socket_deliver+0x46/0x230 [ 1614.734982] #3: (slock-AF_INET){+.-...}, at: [] tcp_v4_err+0x163/0x6b0 [ 1614.734989] #4: (rcu_read_lock){.+.+..}, at: [] ip_queue_xmit+0x0/0x680 [ 1614.734997] #5: (rcu_read_lock_bh){.+....}, at: [] ip_finish_output+0x135/0x890 [ 1614.735004] #6: (rcu_read_lock_bh){.+....}, at: [] dev_queue_xmit+0x0/0xe00 [ 1614.735012] [ 1614.735012] stack backtrace: [ 1614.735016] Pid: 0, comm: swapper/11 Not tainted 3.6.0-rc3+ #782 [ 1614.735018] Call Trace: [ 1614.735020] [] __lock_acquire+0x144c/0x1b10 [ 1614.735033] [] ? check_usage+0x9b/0x4d0 [ 1614.735037] [] ? mark_held_locks+0x82/0x130 [ 1614.735042] [] lock_acquire+0x90/0x200 [ 1614.735047] [] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.735051] [] ? trace_hardirqs_on+0xd/0x10 [ 1614.735060] [] _raw_spin_lock+0x41/0x50 [ 1614.735065] [] ? l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.735069] [] l2tp_xmit_skb+0x172/0xa50 [l2tp_core] [ 1614.735075] [] l2tp_eth_dev_xmit+0x32/0x60 [l2tp_eth] [ 1614.735079] [] dev_hard_start_xmit+0x502/0xa70 [ 1614.735083] [] ? dev_hard_start_xmit+0x5e/0xa70 [ 1614.735087] [] ? dev_queue_xmit+0x141/0xe00 [ 1614.735093] [] sch_direct_xmit+0xfe/0x290 [ 1614.735098] [] dev_queue_xmit+0x1e5/0xe00 [ 1614.735102] [] ? dev_hard_start_xmit+0xa70/0xa70 [ 1614.735106] [] ? eth_header+0x3a/0xf0 [ 1614.735111] [] ? fib_get_table+0x2e/0x280 [ 1614.735117] [] arp_xmit+0x22/0x60 [ 1614.735121] [] arp_send+0x43/0x50 [ 1614.735125] [] arp_solicit+0x18f/0x450 [ 1614.735132] [] neigh_probe+0x4a/0x70 [ 1614.735137] [] __neigh_event_send+0xea/0x300 [ 1614.735141] [] neigh_resolve_output+0x163/0x260 [ 1614.735146] [] ip_finish_output+0x505/0x890 [ 1614.735150] [] ? ip_finish_output+0x135/0x890 [ 1614.735154] [] ip_output+0x59/0xf0 [ 1614.735158] [] ip_local_out+0x2d/0xa0 [ 1614.735162] [] ip_queue_xmit+0x1c3/0x680 [ 1614.735165] [] ? ip_local_out+0xa0/0xa0 [ 1614.735172] [] tcp_transmit_skb+0x402/0xa60 [ 1614.735177] [] tcp_retransmit_skb+0x1a1/0x620 [ 1614.735181] [] tcp_retransmit_timer+0x393/0x960 [ 1614.735185] [] ? tcp_v4_err+0x163/0x6b0 [ 1614.735189] [] tcp_v4_err+0x657/0x6b0 [ 1614.735194] [] ? icmp_socket_deliver+0x46/0x230 [ 1614.735199] [] icmp_socket_deliver+0xce/0x230 [ 1614.735203] [] ? icmp_socket_deliver+0x46/0x230 [ 1614.735208] [] icmp_unreach+0xe4/0x2c0 [ 1614.735213] [] icmp_rcv+0x350/0x4a0 [ 1614.735217] [] ip_local_deliver_finish+0x135/0x4e0 [ 1614.735221] [] ? ip_local_deliver_finish+0x4c/0x4e0 [ 1614.735225] [] ip_local_deliver+0x4a/0x90 [ 1614.735229] [] ip_rcv_finish+0x187/0x730 [ 1614.735233] [] ip_rcv+0x21d/0x300 [ 1614.735237] [] __netif_receive_skb+0x46b/0xd00 [ 1614.735241] [] ? __netif_receive_skb+0x251/0xd00 [ 1614.735245] [] process_backlog+0xb8/0x180 [ 1614.735249] [] net_rx_action+0x159/0x330 [ 1614.735257] [] __do_softirq+0xd0/0x3e0 [ 1614.735264] [] ? tick_program_event+0x24/0x30 [ 1614.735270] [] call_softirq+0x1c/0x30 [ 1614.735278] [] do_softirq+0x8d/0xc0 [ 1614.735282] [] irq_exit+0xae/0xe0 [ 1614.735287] [] smp_apic_timer_interrupt+0x6e/0x99 [ 1614.735291] [] apic_timer_interrupt+0x6c/0x80 [ 1614.735293] [] ? trace_hardirqs_off+0xd/0x10 [ 1614.735306] [] ? intel_idle+0xf5/0x150 [ 1614.735310] [] ? intel_idle+0xee/0x150 [ 1614.735317] [] cpuidle_enter+0x19/0x20 [ 1614.735321] [] cpuidle_idle_call+0xa8/0x630 [ 1614.735327] [] cpu_idle+0x8a/0xe0 [ 1614.735333] [] start_secondary+0x220/0x222 Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_core.c b/net/l2tp/l2tp_core.c index 513cab0..1a9f372 100644 --- a/net/l2tp/l2tp_core.c +++ b/net/l2tp/l2tp_core.c @@ -1501,6 +1501,8 @@ out: return err; } +static struct lock_class_key l2tp_socket_class; + int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 peer_tunnel_id, struct l2tp_tunnel_cfg *cfg, struct l2tp_tunnel **tunnelp) { struct l2tp_tunnel *tunnel = NULL; @@ -1605,6 +1607,8 @@ int l2tp_tunnel_create(struct net *net, int fd, int version, u32 tunnel_id, u32 tunnel->old_sk_destruct = sk->sk_destruct; sk->sk_destruct = &l2tp_tunnel_destruct; tunnel->sock = sk; + lockdep_set_class_and_name(&sk->sk_lock.slock, &l2tp_socket_class, "l2tp_sock"); + sk->sk_allocation = GFP_ATOMIC; /* Add tunnel to our list */ -- cgit v0.10.2 From 3b59df46a449ec9975146d71318c4777ad086744 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 4 Sep 2012 00:03:29 +0000 Subject: xfrm: Workaround incompatibility of ESN and async crypto ESN for esp is defined in RFC 4303. This RFC assumes that the sequence number counters are always up to date. However, this is not true if an async crypto algorithm is employed. If the sequence number counters are not up to date on sequence number check, we may incorrectly update the upper 32 bit of the sequence number. This leads to a DOS. We workaround this by comparing the upper sequence number, (used for authentication) with the upper sequence number computed after the async processing. We drop the packet if these numbers are different. To do this, we introduce a recheck function that does this check in the ESN case. Signed-off-by: Steffen Klassert Acked-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/include/net/xfrm.h b/include/net/xfrm.h index 976a81a..639dd13 100644 --- a/include/net/xfrm.h +++ b/include/net/xfrm.h @@ -273,6 +273,9 @@ struct xfrm_replay { int (*check)(struct xfrm_state *x, struct sk_buff *skb, __be32 net_seq); + int (*recheck)(struct xfrm_state *x, + struct sk_buff *skb, + __be32 net_seq); void (*notify)(struct xfrm_state *x, int event); int (*overflow)(struct xfrm_state *x, struct sk_buff *skb); }; diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c index 54a0dc2..ab2bb42 100644 --- a/net/xfrm/xfrm_input.c +++ b/net/xfrm/xfrm_input.c @@ -212,7 +212,7 @@ resume: /* only the first xfrm gets the encap type */ encap_type = 0; - if (async && x->repl->check(x, skb, seq)) { + if (async && x->repl->recheck(x, skb, seq)) { XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR); goto drop_unlock; } diff --git a/net/xfrm/xfrm_replay.c b/net/xfrm/xfrm_replay.c index 2f6d11d..3efb07d 100644 --- a/net/xfrm/xfrm_replay.c +++ b/net/xfrm/xfrm_replay.c @@ -420,6 +420,18 @@ err: return -EINVAL; } +static int xfrm_replay_recheck_esn(struct xfrm_state *x, + struct sk_buff *skb, __be32 net_seq) +{ + if (unlikely(XFRM_SKB_CB(skb)->seq.input.hi != + htonl(xfrm_replay_seqhi(x, net_seq)))) { + x->stats.replay_window++; + return -EINVAL; + } + + return xfrm_replay_check_esn(x, skb, net_seq); +} + static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq) { unsigned int bitnr, nr, i; @@ -479,6 +491,7 @@ static void xfrm_replay_advance_esn(struct xfrm_state *x, __be32 net_seq) static struct xfrm_replay xfrm_replay_legacy = { .advance = xfrm_replay_advance, .check = xfrm_replay_check, + .recheck = xfrm_replay_check, .notify = xfrm_replay_notify, .overflow = xfrm_replay_overflow, }; @@ -486,6 +499,7 @@ static struct xfrm_replay xfrm_replay_legacy = { static struct xfrm_replay xfrm_replay_bmp = { .advance = xfrm_replay_advance_bmp, .check = xfrm_replay_check_bmp, + .recheck = xfrm_replay_check_bmp, .notify = xfrm_replay_notify_bmp, .overflow = xfrm_replay_overflow_bmp, }; @@ -493,6 +507,7 @@ static struct xfrm_replay xfrm_replay_bmp = { static struct xfrm_replay xfrm_replay_esn = { .advance = xfrm_replay_advance_esn, .check = xfrm_replay_check_esn, + .recheck = xfrm_replay_recheck_esn, .notify = xfrm_replay_notify_bmp, .overflow = xfrm_replay_overflow_esn, }; -- cgit v0.10.2 From cadf84bfeb80e216fde328d357fe856160157d2c Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 3 Sep 2012 16:39:38 +0100 Subject: staging: comedi: amplc_pci224: Fix PCI ref count When attaching a PCI device manually via the comedi driver `attach` hook (`pci224_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `pci224_find_pci_dev()`). It is decremented when the `detach` hook (`pci224_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`pci224_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device. Increment the PCI device reference count in `pci224_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Cc: stable # 3.5.x Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_pci224.c b/drivers/staging/comedi/drivers/amplc_pci224.c index 4e17f13..8bf109e 100644 --- a/drivers/staging/comedi/drivers/amplc_pci224.c +++ b/drivers/staging/comedi/drivers/amplc_pci224.c @@ -1503,6 +1503,13 @@ pci224_attach_pci(struct comedi_device *dev, struct pci_dev *pci_dev) DRIVER_NAME ": BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pci224_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pci224_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pci224_attach_common(dev, pci_dev, NULL); } -- cgit v0.10.2 From 1a6671d208bb8f558dc12b6a7d2f55e80cf5828d Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 3 Sep 2012 16:39:39 +0100 Subject: staging: comedi: amplc_dio200: Fix PCI ref count When attaching a PCI device manually via the comedi driver `attach` hook (`dio200_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `dio200_find_pci_dev()`). It is decremented when the `detach` hook (`dio200_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`dio200_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device. Increment the PCI device reference count in `dio200_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_dio200.c b/drivers/staging/comedi/drivers/amplc_dio200.c index 6c81e377..cc8931f 100644 --- a/drivers/staging/comedi/drivers/amplc_dio200.c +++ b/drivers/staging/comedi/drivers/amplc_dio200.c @@ -1412,6 +1412,13 @@ static int __devinit dio200_attach_pci(struct comedi_device *dev, dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in dio200_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via dio200_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return dio200_pci_common_attach(dev, pci_dev); } -- cgit v0.10.2 From 3abcfe0eeda850481143d05bdd206dd2b170d07d Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 3 Sep 2012 16:39:40 +0100 Subject: staging: comedi: amplc_pc236: Fix PCI ref count When attaching a PCI device manually via the comedi driver `attach` hook (`pc236_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `pc236_find_pci_dev()`). It is decremented when the `detach` hook (`pc236_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`pc236_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device. Increment the PCI device reference count in `pc236_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_pc236.c b/drivers/staging/comedi/drivers/amplc_pc236.c index aabba98..f502879 100644 --- a/drivers/staging/comedi/drivers/amplc_pc236.c +++ b/drivers/staging/comedi/drivers/amplc_pc236.c @@ -565,6 +565,13 @@ static int __devinit pc236_attach_pci(struct comedi_device *dev, dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pc236_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pc236_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pc236_pci_common_attach(dev, pci_dev); } -- cgit v0.10.2 From a0234ade63ce2c14841d9d6e802ed735b4ed2829 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 3 Sep 2012 16:39:41 +0100 Subject: staging: comedi: amplc_pc263: Fix PCI ref count When attaching a PCI device manually via the comedi driver `attach` hook (`pc263_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `pc263_find_pci_dev()`). It is decremented when the `detach` hook (`pc263_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`pc263_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device. Increment the PCI device reference count in `pc263_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_pc263.c b/drivers/staging/comedi/drivers/amplc_pc263.c index 40ec1ff..8191c4e 100644 --- a/drivers/staging/comedi/drivers/amplc_pc263.c +++ b/drivers/staging/comedi/drivers/amplc_pc263.c @@ -298,6 +298,13 @@ static int __devinit pc263_attach_pci(struct comedi_device *dev, dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pc263_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pc263_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pc263_pci_common_attach(dev, pci_dev); } -- cgit v0.10.2 From 4375e61ed21d629fe922b3e5591ad6588f715137 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 3 Sep 2012 16:39:42 +0100 Subject: staging: comedi: amplc_pci230: Fix PCI ref count When attaching a PCI device manually via the comedi driver `attach` hook (`pci230_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `pci230_find_pci_dev()`). It is decremented when the `detach` hook (`pci230_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`pci230_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device. Increment the PCI device reference count in `pci230_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/amplc_pci230.c b/drivers/staging/comedi/drivers/amplc_pci230.c index 1b67d0c..66e74bd 100644 --- a/drivers/staging/comedi/drivers/amplc_pci230.c +++ b/drivers/staging/comedi/drivers/amplc_pci230.c @@ -2925,6 +2925,13 @@ static int __devinit pci230_attach_pci(struct comedi_device *dev, "amplc_pci230: BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in pci230_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via pci230_attach() + * has been removed. + */ + pci_dev_get(pci_dev); return pci230_attach_common(dev, pci_dev); } -- cgit v0.10.2 From 4a7a4f95a5e15648f24a971b36b82adc36d2cb6b Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Mon, 3 Sep 2012 16:39:43 +0100 Subject: staging: comedi: das08: Fix PCI ref count When attaching a PCI device manually via the comedi driver `attach` hook (`das08_attach()`) (called by the comedi core for the `COMEDI_DEVCONFIG` ioctl), its reference count is incremented in the `for_each_pci_dev` loop (in `das08_find_pci()`). It is decremented when the `detach` hook (`das08_detach()`) is called to detach the device. However, when the PCI device is attached automatically via the `attach_pci` hook (`das08_attach_pci()`, called at probe time via `comedi_pci_auto_config()`) it's reference count is not incremented so there will be an unmatched decrement when detaching the device. Increment the PCI device reference count in `das08_attach_pci()` to correct the mismatch. Once support for manual configuration has been removed from this driver, the calls to `pci_dev_get()` and `pci_dev_put()` can be removed. Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c index 874e02e..c5676e2 100644 --- a/drivers/staging/comedi/drivers/das08.c +++ b/drivers/staging/comedi/drivers/das08.c @@ -922,6 +922,13 @@ das08_attach_pci(struct comedi_device *dev, struct pci_dev *pdev) dev_err(dev->class_dev, "BUG! cannot determine board type!\n"); return -EINVAL; } + /* + * Need to 'get' the PCI device to match the 'put' in das08_detach(). + * TODO: Remove the pci_dev_get() and matching pci_dev_put() once + * support for manual attachment of PCI devices via das08_attach() + * has been removed. + */ + pci_dev_get(pdev); return das08_pci_attach_common(dev, pdev); } -- cgit v0.10.2 From c3f52af3e03013db5237e339c817beaae5ec9e3a Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Mon, 3 Sep 2012 14:56:02 -0400 Subject: NFS: Fix the initialisation of the readdir 'cookieverf' array When the NFS_COOKIEVERF helper macro was converted into a static inline function in commit 99fadcd764 (nfs: convert NFS_*(inode) helpers to static inline), we broke the initialisation of the readdir cookies, since that depended on doing a memset with an argument of 'sizeof(NFS_COOKIEVERF(inode))' which therefore changed from sizeof(be32 cookieverf[2]) to sizeof(be32 *). At this point, NFS_COOKIEVERF seems to be more of an obfuscation than a helper, so the best thing would be to just get rid of it. Also see: https://bugzilla.kernel.org/show_bug.cgi?id=46881 Reported-by: Andi Kleen Reported-by: David Binderman Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/inode.c b/fs/nfs/inode.c index c6e895f..9b47610 100644 --- a/fs/nfs/inode.c +++ b/fs/nfs/inode.c @@ -154,7 +154,7 @@ static void nfs_zap_caches_locked(struct inode *inode) nfsi->attrtimeo = NFS_MINATTRTIMEO(inode); nfsi->attrtimeo_timestamp = jiffies; - memset(NFS_COOKIEVERF(inode), 0, sizeof(NFS_COOKIEVERF(inode))); + memset(NFS_I(inode)->cookieverf, 0, sizeof(NFS_I(inode)->cookieverf)); if (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode)) nfsi->cache_validity |= NFS_INO_INVALID_ATTR|NFS_INO_INVALID_DATA|NFS_INO_INVALID_ACCESS|NFS_INO_INVALID_ACL|NFS_INO_REVAL_PAGECACHE; else diff --git a/fs/nfs/nfs3proc.c b/fs/nfs/nfs3proc.c index d6b3b5f..6932209 100644 --- a/fs/nfs/nfs3proc.c +++ b/fs/nfs/nfs3proc.c @@ -643,7 +643,7 @@ nfs3_proc_readdir(struct dentry *dentry, struct rpc_cred *cred, u64 cookie, struct page **pages, unsigned int count, int plus) { struct inode *dir = dentry->d_inode; - __be32 *verf = NFS_COOKIEVERF(dir); + __be32 *verf = NFS_I(dir)->cookieverf; struct nfs3_readdirargs arg = { .fh = NFS_FH(dir), .cookie = cookie, diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6352741..86b4c73 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3215,11 +3215,11 @@ static int _nfs4_proc_readdir(struct dentry *dentry, struct rpc_cred *cred, dentry->d_parent->d_name.name, dentry->d_name.name, (unsigned long long)cookie); - nfs4_setup_readdir(cookie, NFS_COOKIEVERF(dir), dentry, &args); + nfs4_setup_readdir(cookie, NFS_I(dir)->cookieverf, dentry, &args); res.pgbase = args.pgbase; status = nfs4_call_sync(NFS_SERVER(dir)->client, NFS_SERVER(dir), &msg, &args.seq_args, &res.seq_res, 0); if (status >= 0) { - memcpy(NFS_COOKIEVERF(dir), res.verifier.data, NFS4_VERIFIER_SIZE); + memcpy(NFS_I(dir)->cookieverf, res.verifier.data, NFS4_VERIFIER_SIZE); status += args.pgbase; } diff --git a/include/linux/nfs_fs.h b/include/linux/nfs_fs.h index 1f8fc7f..4b03f56 100644 --- a/include/linux/nfs_fs.h +++ b/include/linux/nfs_fs.h @@ -265,11 +265,6 @@ static inline const struct nfs_rpc_ops *NFS_PROTO(const struct inode *inode) return NFS_SERVER(inode)->nfs_client->rpc_ops; } -static inline __be32 *NFS_COOKIEVERF(const struct inode *inode) -{ - return NFS_I(inode)->cookieverf; -} - static inline unsigned NFS_MINATTRTIMEO(const struct inode *inode) { struct nfs_server *nfss = NFS_SERVER(inode); -- cgit v0.10.2 From 872ece86ea5c367aa92f44689c2d01a1c767aeb3 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 4 Sep 2012 11:05:07 -0400 Subject: NFS: Fix a problem with the legacy binary mount code Apparently, am-utils is still using the legacy binary mountdata interface, and is having trouble parsing /proc/mounts due to the 'port=' field being incorrectly set. The following patch should fix up the regression. Reported-by: Marius Tolzmann Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 239aff7..b8eda70 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1867,6 +1867,7 @@ static int nfs23_validate_mount_data(void *options, memcpy(sap, &data->addr, sizeof(data->addr)); args->nfs_server.addrlen = sizeof(data->addr); + args->nfs_server.port = ntohs(data->addr.sin_port); if (!nfs_verify_server_address(sap)) goto out_no_address; @@ -2564,6 +2565,7 @@ static int nfs4_validate_mount_data(void *options, return -EFAULT; if (!nfs_verify_server_address(sap)) goto out_no_address; + args->nfs_server.port = ntohs(((struct sockaddr_in *)sap)->sin_port); if (data->auth_flavourlen) { if (data->auth_flavourlen > 1) -- cgit v0.10.2 From 21f498c2f73bd6150d82931f09965826dca0b5f2 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 24 Aug 2012 10:59:25 -0400 Subject: NFSv4: Fix range checking in __nfs4_get_acl_uncached and __nfs4_proc_set_acl Ensure that the user supplied buffer size doesn't cause us to overflow the 'pages' array. Also fix up some confusion between the use of PAGE_SIZE and PAGE_CACHE_SIZE when calculating buffer sizes. We're not using the page cache for anything here. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 86b4c73..6b94f2d 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3653,11 +3653,11 @@ static inline int nfs4_server_supports_acls(struct nfs_server *server) && (server->acl_bitmask & ACL4_SUPPORT_DENY_ACL); } -/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_CACHE_SIZE, and that - * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_CACHE_SIZE) bytes on +/* Assuming that XATTR_SIZE_MAX is a multiple of PAGE_SIZE, and that + * it's OK to put sizeof(void) * (XATTR_SIZE_MAX/PAGE_SIZE) bytes on * the stack. */ -#define NFS4ACL_MAXPAGES (XATTR_SIZE_MAX >> PAGE_CACHE_SHIFT) +#define NFS4ACL_MAXPAGES DIV_ROUND_UP(XATTR_SIZE_MAX, PAGE_SIZE) static int buf_to_pages_noslab(const void *buf, size_t buflen, struct page **pages, unsigned int *pgbase) @@ -3668,7 +3668,7 @@ static int buf_to_pages_noslab(const void *buf, size_t buflen, spages = pages; do { - len = min_t(size_t, PAGE_CACHE_SIZE, buflen); + len = min_t(size_t, PAGE_SIZE, buflen); newpage = alloc_page(GFP_KERNEL); if (newpage == NULL) @@ -3782,17 +3782,16 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu .rpc_argp = &args, .rpc_resp = &res, }; - int ret = -ENOMEM, npages, i; + unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE); + int ret = -ENOMEM, i; size_t acl_len = 0; - npages = (buflen + PAGE_SIZE - 1) >> PAGE_SHIFT; /* As long as we're doing a round trip to the server anyway, * let's be prepared for a page of acl data. */ if (npages == 0) npages = 1; - - /* Add an extra page to handle the bitmap returned */ - npages++; + if (npages > ARRAY_SIZE(pages)) + return -ERANGE; for (i = 0; i < npages; i++) { pages[i] = alloc_page(GFP_KERNEL); @@ -3891,10 +3890,13 @@ static int __nfs4_proc_set_acl(struct inode *inode, const void *buf, size_t bufl .rpc_argp = &arg, .rpc_resp = &res, }; + unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE); int ret, i; if (!nfs4_server_supports_acls(server)) return -EOPNOTSUPP; + if (npages > ARRAY_SIZE(pages)) + return -ERANGE; i = buf_to_pages_noslab(buf, buflen, arg.acl_pages, &arg.acl_pgbase); if (i < 0) return i; -- cgit v0.10.2 From e6391a182865efc896cb2a8d79e07b7ac2f45b48 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 31 Aug 2012 20:41:29 +0100 Subject: staging: comedi: das08: Correct AI encoding for das08jr-16-ao The element of `das08_boards[]` for the 'das08jr-16-ao' board has the `ai_encoding` member set to `das08_encode12`. It should be set to `das08_encode16` same as the 'das08jr/16' board. After all, this board has 16-bit AI resolution. The description of the A/D LSB register at offset 0 seems incorrect in the user manual "cio-das08jr-16-ao.pdf" as it implies that the AI resolution is only 12 bits. The diagrams of the A/D LSB and MSB registers show 15 data bits and a sign bit, which matches what the software expects for the `das08_encode16` AI encoding method. Cc: stable Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c index c5676e2..e5eb3b9 100644 --- a/drivers/staging/comedi/drivers/das08.c +++ b/drivers/staging/comedi/drivers/das08.c @@ -623,7 +623,7 @@ static const struct das08_board_struct das08_boards[] = { .ai = das08_ai_rinsn, .ai_nbits = 16, .ai_pg = das08_pg_none, - .ai_encoding = das08_encode12, + .ai_encoding = das08_encode16, .ao = das08jr_ao_winsn, .ao_nbits = 16, .di = das08jr_di_rbits, -- cgit v0.10.2 From 61ed59ed09e6ad2b8395178ea5ad5f653bba08e3 Mon Sep 17 00:00:00 2001 From: Ian Abbott Date: Fri, 31 Aug 2012 20:41:30 +0100 Subject: staging: comedi: das08: Correct AO output for das08jr-16-ao Don't zero out bits 15..12 of the data value in `das08jr_ao_winsn()` as that knobbles the upper three-quarters of the output range for the 'das08jr-16-ao' board. Cc: stable Signed-off-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/comedi/drivers/das08.c b/drivers/staging/comedi/drivers/das08.c index e5eb3b9..67a914a 100644 --- a/drivers/staging/comedi/drivers/das08.c +++ b/drivers/staging/comedi/drivers/das08.c @@ -378,7 +378,7 @@ das08jr_ao_winsn(struct comedi_device *dev, struct comedi_subdevice *s, int chan; lsb = data[0] & 0xff; - msb = (data[0] >> 8) & 0xf; + msb = (data[0] >> 8) & 0xff; chan = CR_CHAN(insn->chanspec); -- cgit v0.10.2 From b320e97240de0f98b81f866d59f47af41780eab0 Mon Sep 17 00:00:00 2001 From: Wu Fengguang Date: Sat, 1 Sep 2012 21:25:46 +0000 Subject: i825xx: fix paging fault on znet_probe() In znet_probe(), strncmp() may access beyond 0x100000 and trigger the below oops in kvm. Fix it by limiting the loop under 0x100000-8. I suspect the limit could be further decreased to 0x100000-sizeof(struct netidblk), however no datasheet at hand.. [ 3.744312] BUG: unable to handle kernel paging request at 80100000 [ 3.746145] IP: [<8119d12a>] strncmp+0xc/0x20 [ 3.747446] *pde = 01d10067 *pte = 00100160 [ 3.747493] Oops: 0000 [#1] DEBUG_PAGEALLOC [ 3.747493] Pid: 1, comm: swapper Not tainted 3.6.0-rc1-00018-g57bfc0a #73 Bochs Bochs [ 3.747493] EIP: 0060:[<8119d12a>] EFLAGS: 00010206 CPU: 0 [ 3.747493] EIP is at strncmp+0xc/0x20 [ 3.747493] EAX: 800fff4e EBX: 00000006 ECX: 00000006 EDX: 814d2bb9 [ 3.747493] ESI: 80100000 EDI: 814d2bba EBP: 8e03dfa0 ESP: 8e03df98 [ 3.747493] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068 [ 3.747493] CR0: 8005003b CR2: 80100000 CR3: 016f7000 CR4: 00000690 [ 3.747493] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [ 3.747493] DR6: ffff0ff0 DR7: 00000400 [ 3.747493] Process swapper (pid: 1, ti=8e03c000 task=8e040000 task.ti=8e03c000) [ 3.747493] Stack: [ 3.747493] 800fffff 00000000 8e03dfb4 816a1376 00000006 816a134a 00000000 8e03dfd0 [ 3.747493] 816819b5 816ed1c0 8e03dfe4 00000006 00000123 816ed604 8e03dfe4 81681b29 [ 3.747493] 00000000 81681a5b 00000000 00000000 8134e542 00000000 00000000 00000000 [ 3.747493] Call Trace: [ 3.747493] [<816a1376>] znet_probe+0x2c/0x26b [ 3.747493] [<816a134a>] ? dnet_driver_init+0xf/0xf [ 3.747493] [<816819b5>] do_one_initcall+0x6a/0x110 [ 3.747493] [<81681b29>] kernel_init+0xce/0x14b Signed-off-by: Fengguang Wu Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/i825xx/znet.c b/drivers/net/ethernet/i825xx/znet.c index bd1f1ef..ba4e0ce 100644 --- a/drivers/net/ethernet/i825xx/znet.c +++ b/drivers/net/ethernet/i825xx/znet.c @@ -139,8 +139,11 @@ struct znet_private { /* Only one can be built-in;-> */ static struct net_device *znet_dev; +#define NETIDBLK_MAGIC "NETIDBLK" +#define NETIDBLK_MAGIC_SIZE 8 + struct netidblk { - char magic[8]; /* The magic number (string) "NETIDBLK" */ + char magic[NETIDBLK_MAGIC_SIZE]; /* The magic number (string) "NETIDBLK" */ unsigned char netid[8]; /* The physical station address */ char nettype, globalopt; char vendor[8]; /* The machine vendor and product name. */ @@ -373,14 +376,16 @@ static int __init znet_probe (void) struct znet_private *znet; struct net_device *dev; char *p; + char *plast = phys_to_virt(0x100000 - NETIDBLK_MAGIC_SIZE); int err = -ENOMEM; /* This code scans the region 0xf0000 to 0xfffff for a "NETIDBLK". */ - for(p = (char *)phys_to_virt(0xf0000); p < (char *)phys_to_virt(0x100000); p++) - if (*p == 'N' && strncmp(p, "NETIDBLK", 8) == 0) + for(p = (char *)phys_to_virt(0xf0000); p <= plast; p++) + if (*p == 'N' && + strncmp(p, NETIDBLK_MAGIC, NETIDBLK_MAGIC_SIZE) == 0) break; - if (p >= (char *)phys_to_virt(0x100000)) { + if (p > plast) { if (znet_debug > 1) printk(KERN_INFO "No Z-Note ethernet adaptor found.\n"); return -ENODEV; -- cgit v0.10.2 From 01f8a27e3c9109c0187f473e593fa7b45cdb65e8 Mon Sep 17 00:00:00 2001 From: Emil Goode Date: Fri, 17 Aug 2012 19:31:04 +0200 Subject: staging: wlan-ng: Fix problem with wrong arguments MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The function pointer scan in struct cfg80211_ops is not supposed to be assigned a function with a struct net_device pointer as an argument. Instead access the net_device struct in the following way: struct net_device *dev = request->wdev->netdev; sparse gives these warnings: drivers/staging/wlan-ng/cfg80211.c:726:17: warning: incorrect type in initializer (incompatible argument 2 (different base types)) expected int ( *scan )( ... ) got int ( extern [toplevel] * )( ... ) drivers/staging/wlan-ng/cfg80211.c:726:2: warning: initialization from incompatible pointer type [enabled by default] drivers/staging/wlan-ng/cfg80211.c:726:2: warning: (near initialization for ‘prism2_usb_cfg_ops.scan’) [enabled by default] Signed-off-by: Emil Goode Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index fabff4d..0970127 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -327,9 +327,9 @@ int prism2_get_station(struct wiphy *wiphy, struct net_device *dev, return result; } -int prism2_scan(struct wiphy *wiphy, struct net_device *dev, - struct cfg80211_scan_request *request) +int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) { + struct net_device *dev = request->wdev->netdev; struct prism2_wiphy_private *priv = wiphy_priv(wiphy); wlandevice_t *wlandev = dev->ml_priv; struct p80211msg_dot11req_scan msg1; -- cgit v0.10.2 From 07732be2efa7d4ade66d224ea84d2c30740d0b77 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Sun, 19 Aug 2012 19:36:37 +0300 Subject: staging: ozwpan: fix memcmp() test in oz_set_active_pd() "addr" is a pointer so it's either 4 or 8 bytes, but actually we want to compare 6 bytes (ETH_ALEN). As network stack already provides helper function is_zero_ether_addr() we use that instead of memcmp Signed-off-by: Tomas Winkler Acked-by: Dan Carpenter Acked-by: Rupesh Gujare Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/ozwpan/ozcdev.c b/drivers/staging/ozwpan/ozcdev.c index d983219..758ce0a 100644 --- a/drivers/staging/ozwpan/ozcdev.c +++ b/drivers/staging/ozwpan/ozcdev.c @@ -8,6 +8,7 @@ #include #include #include +#include #include #include #include "ozconfig.h" @@ -213,7 +214,7 @@ static int oz_set_active_pd(u8 *addr) if (old_pd) oz_pd_put(old_pd); } else { - if (!memcmp(addr, "\0\0\0\0\0\0", sizeof(addr))) { + if (is_zero_ether_addr(addr)) { spin_lock_bh(&g_cdev.lock); pd = g_cdev.active_pd; g_cdev.active_pd = 0; -- cgit v0.10.2 From c0cc88a7627c333de50b07b7c60b1d49d9d2e6cc Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 4 Sep 2012 15:54:55 -0400 Subject: l2tp: fix a typo in l2tp_eth_dev_recv() While investigating l2tp bug, I hit a bug in eth_type_trans(), because not enough bytes were pulled in skb head. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/l2tp/l2tp_eth.c b/net/l2tp/l2tp_eth.c index f9ee74d..3bfb34a 100644 --- a/net/l2tp/l2tp_eth.c +++ b/net/l2tp/l2tp_eth.c @@ -153,7 +153,7 @@ static void l2tp_eth_dev_recv(struct l2tp_session *session, struct sk_buff *skb, print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, skb->data, length); } - if (!pskb_may_pull(skb, sizeof(ETH_HLEN))) + if (!pskb_may_pull(skb, ETH_HLEN)) goto error; secpath_reset(skb); -- cgit v0.10.2 From aa209eef3ce8419ff2926c2fa944dfbfb5afbacb Mon Sep 17 00:00:00 2001 From: Malcolm Priestley Date: Wed, 29 Aug 2012 23:08:21 +0100 Subject: staging: vt6656: [BUG] - Failed connection, incorrect endian. Hi, This patch fixes a bug with driver failing to negotiate a connection. The bug was traced to commit 203e4615ee9d9fa8d3506b9d0ef30095e4d5bc90 staging: vt6656: removed custom definitions of Ethernet packet types In that patch, definitions in include/linux/if_ether.h replaced ones in tether.h which had both big and little endian definitions. include/linux/if_ether.h only refers to big endian values, cpu_to_be16 should be used for the correct endian architectures. Signed-off-by: Malcolm Priestley Cc: stable # 2.6.37+ Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/vt6656/dpc.c b/drivers/staging/vt6656/dpc.c index e4bdf2a..3aa895e 100644 --- a/drivers/staging/vt6656/dpc.c +++ b/drivers/staging/vt6656/dpc.c @@ -200,7 +200,7 @@ s_vProcessRxMACHeader ( } else if (!compare_ether_addr(pbyRxBuffer, &pDevice->abySNAP_RFC1042[0])) { cbHeaderSize += 6; pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize); - if ((*pwType == cpu_to_le16(ETH_P_IPX)) || + if ((*pwType == cpu_to_be16(ETH_P_IPX)) || (*pwType == cpu_to_le16(0xF380))) { cbHeaderSize -= 8; pwType = (PWORD) (pbyRxBufferAddr + cbHeaderSize); diff --git a/drivers/staging/vt6656/rxtx.c b/drivers/staging/vt6656/rxtx.c index bb46452..b6e04e7 100644 --- a/drivers/staging/vt6656/rxtx.c +++ b/drivers/staging/vt6656/rxtx.c @@ -1699,7 +1699,7 @@ s_bPacketToWirelessUsb( // 802.1H if (ntohs(psEthHeader->wType) > ETH_DATA_LEN) { if (pDevice->dwDiagRefCount == 0) { - if ((psEthHeader->wType == cpu_to_le16(ETH_P_IPX)) || + if ((psEthHeader->wType == cpu_to_be16(ETH_P_IPX)) || (psEthHeader->wType == cpu_to_le16(0xF380))) { memcpy((PBYTE) (pbyPayloadHead), abySNAP_Bridgetunnel, 6); @@ -2838,10 +2838,10 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb) Packet_Type = skb->data[ETH_HLEN+1]; Descriptor_type = skb->data[ETH_HLEN+1+1+2]; Key_info = (skb->data[ETH_HLEN+1+1+2+1] << 8)|(skb->data[ETH_HLEN+1+1+2+2]); - if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) { - /* 802.1x OR eapol-key challenge frame transfer */ - if (((Protocol_Version == 1) || (Protocol_Version == 2)) && - (Packet_Type == 3)) { + if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) { + /* 802.1x OR eapol-key challenge frame transfer */ + if (((Protocol_Version == 1) || (Protocol_Version == 2)) && + (Packet_Type == 3)) { bTxeapol_key = TRUE; if(!(Key_info & BIT3) && //WPA or RSN group-key challenge (Key_info & BIT8) && (Key_info & BIT9)) { //send 2/2 key @@ -2987,19 +2987,19 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb) } } - if (pDevice->sTxEthHeader.wType == cpu_to_le16(ETH_P_PAE)) { - if (pDevice->byBBType != BB_TYPE_11A) { - pDevice->wCurrentRate = RATE_1M; - pDevice->byACKRate = RATE_1M; - pDevice->byTopCCKBasicRate = RATE_1M; - pDevice->byTopOFDMBasicRate = RATE_6M; - } else { - pDevice->wCurrentRate = RATE_6M; - pDevice->byACKRate = RATE_6M; - pDevice->byTopCCKBasicRate = RATE_1M; - pDevice->byTopOFDMBasicRate = RATE_6M; - } - } + if (pDevice->sTxEthHeader.wType == cpu_to_be16(ETH_P_PAE)) { + if (pDevice->byBBType != BB_TYPE_11A) { + pDevice->wCurrentRate = RATE_1M; + pDevice->byACKRate = RATE_1M; + pDevice->byTopCCKBasicRate = RATE_1M; + pDevice->byTopOFDMBasicRate = RATE_6M; + } else { + pDevice->wCurrentRate = RATE_6M; + pDevice->byACKRate = RATE_6M; + pDevice->byTopCCKBasicRate = RATE_1M; + pDevice->byTopOFDMBasicRate = RATE_6M; + } + } DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO "dma_tx: pDevice->wCurrentRate = %d\n", @@ -3015,7 +3015,7 @@ int nsDMA_tx_packet(PSDevice pDevice, unsigned int uDMAIdx, struct sk_buff *skb) if (bNeedEncryption == TRUE) { DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"ntohs Pkt Type=%04x\n", ntohs(pDevice->sTxEthHeader.wType)); - if ((pDevice->sTxEthHeader.wType) == cpu_to_le16(ETH_P_PAE)) { + if ((pDevice->sTxEthHeader.wType) == cpu_to_be16(ETH_P_PAE)) { bNeedEncryption = FALSE; DBG_PRT(MSG_LEVEL_DEBUG, KERN_INFO"Pkt Type=%04x\n", (pDevice->sTxEthHeader.wType)); if ((pMgmt->eCurrMode == WMAC_MODE_ESS_STA) && (pMgmt->eCurrState == WMAC_STATE_ASSOC)) { -- cgit v0.10.2 From 6bd4a5d96c08dc2380f8053b1bd4f879f55cd3c9 Mon Sep 17 00:00:00 2001 From: "Dae S. Kim" Date: Fri, 31 Aug 2012 02:00:51 +0200 Subject: Staging: Android alarm: IOCTL command encoding fix Fixed a bug. Data was being written to user space using an IOCTL command encoded with _IOC_WRITE access mode. Signed-off-by: Dae S. Kim Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/android/android_alarm.h b/drivers/staging/android/android_alarm.h index d0cafd6..f2ffd96 100644 --- a/drivers/staging/android/android_alarm.h +++ b/drivers/staging/android/android_alarm.h @@ -51,10 +51,12 @@ enum android_alarm_return_flags { #define ANDROID_ALARM_WAIT _IO('a', 1) #define ALARM_IOW(c, type, size) _IOW('a', (c) | ((type) << 4), size) +#define ALARM_IOR(c, type, size) _IOR('a', (c) | ((type) << 4), size) + /* Set alarm */ #define ANDROID_ALARM_SET(type) ALARM_IOW(2, type, struct timespec) #define ANDROID_ALARM_SET_AND_WAIT(type) ALARM_IOW(3, type, struct timespec) -#define ANDROID_ALARM_GET_TIME(type) ALARM_IOW(4, type, struct timespec) +#define ANDROID_ALARM_GET_TIME(type) ALARM_IOR(4, type, struct timespec) #define ANDROID_ALARM_SET_RTC _IOW('a', 5, struct timespec) #define ANDROID_ALARM_BASE_CMD(cmd) (cmd & ~(_IOC(0, 0, 0xf0, 0))) #define ANDROID_ALARM_IOCTL_TO_TYPE(cmd) (_IOC_NR(cmd) >> 4) -- cgit v0.10.2 From 29d214576f936db627ff62afb9ef438eea18bcd2 Mon Sep 17 00:00:00 2001 From: Manoj Iyer Date: Wed, 22 Aug 2012 11:53:18 -0500 Subject: xhci: Recognize USB 3.0 devices as superspeed at powerup On Intel Panther Point chipset USB 3.0 devices show up as high-speed devices on powerup, but after an s3 cycle they are correctly recognized as SuperSpeed. At powerup switch the port to xHCI so that USB 3.0 devices are correctly recognized. BugLink: http://bugs.launchpad.net/bugs/1000424 This patch should be backported to kernels as old as 3.0, that contain commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Manoj Iyer Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index c5e9e4a..486e812 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -870,9 +870,10 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) /* Disable any BIOS SMIs and clear all SMI events*/ writel(val, base + ext_cap_offset + XHCI_LEGACY_CONTROL_OFFSET); +hc_init: if (usb_is_intel_switchable_xhci(pdev)) usb_enable_xhci_ports(pdev); -hc_init: + op_reg_base = base + XHCI_HC_LENGTH(readl(base)); /* Wait for the host controller to be ready before writing any -- cgit v0.10.2 From a96874a2a92feaef607ddd3137277a788cb927a6 Mon Sep 17 00:00:00 2001 From: Keng-Yu Lin Date: Fri, 10 Aug 2012 01:39:23 +0800 Subject: Intel xhci: Only switch the switchable ports With a previous patch to enable the EHCI/XHCI port switching, it switches all the available ports. The assumption is not correct because the BIOS may expect some ports not switchable by the OS. There are two more registers that contains the information of the switchable and non-switchable ports. This patch adds the checking code for the two register so that only the switchable ports are altered. This patch should be backported to kernels as old as 3.0, that contain commit ID 69e848c2090aebba5698a1620604c7dccb448684 "Intel xhci: Support EHCI/xHCI port switching." Signed-off-by: Keng-Yu Lin Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 486e812..20b9f45 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -75,7 +75,9 @@ #define NB_PIF0_PWRDOWN_1 0x01100013 #define USB_INTEL_XUSB2PR 0xD0 +#define USB_INTEL_USB2PRM 0xD4 #define USB_INTEL_USB3_PSSEN 0xD8 +#define USB_INTEL_USB3PRM 0xDC static struct amd_chipset_info { struct pci_dev *nb_dev; @@ -772,10 +774,18 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) return; } - ports_available = 0xffffffff; + /* Read USB3PRM, the USB 3.0 Port Routing Mask Register + * Indicate the ports that can be changed from OS. + */ + pci_read_config_dword(xhci_pdev, USB_INTEL_USB3PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable ports to enable SuperSpeed: 0x%x\n", + ports_available); + /* Write USB3_PSSEN, the USB 3.0 Port SuperSpeed Enable - * Register, to turn on SuperSpeed terminations for all - * available ports. + * Register, to turn on SuperSpeed terminations for the + * switchable ports. */ pci_write_config_dword(xhci_pdev, USB_INTEL_USB3_PSSEN, cpu_to_le32(ports_available)); @@ -785,7 +795,16 @@ void usb_enable_xhci_ports(struct pci_dev *xhci_pdev) dev_dbg(&xhci_pdev->dev, "USB 3.0 ports that are now enabled " "under xHCI: 0x%x\n", ports_available); - ports_available = 0xffffffff; + /* Read XUSB2PRM, xHCI USB 2.0 Port Routing Mask Register + * Indicate the USB 2.0 ports to be controlled by the xHCI host. + */ + + pci_read_config_dword(xhci_pdev, USB_INTEL_USB2PRM, + &ports_available); + + dev_dbg(&xhci_pdev->dev, "Configurable USB 2.0 ports to hand over to xCHI: 0x%x\n", + ports_available); + /* Write XUSB2PR, the xHC USB 2.0 Port Routing Register, to * switch the USB 2.0 power and data lines over to the xHCI * host. -- cgit v0.10.2 From 96e65306b81351b656835c15931d1d237b252f27 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Sun, 2 Sep 2012 00:28:19 +0800 Subject: workqueue: UNBOUND -> REBIND morphing in rebind_workers() should be atomic The compiler may compile the following code into TWO write/modify instructions. worker->flags &= ~WORKER_UNBOUND; worker->flags |= WORKER_REBIND; so the other CPU may temporarily see worker->flags which doesn't have either WORKER_UNBOUND or WORKER_REBIND set and perform local wakeup prematurely. Fix it by using single explicit assignment via ACCESS_ONCE(). Because idle workers have another WORKER_NOT_RUNNING flag, this bug doesn't exist for them; however, update it to use the same pattern for consistency. tj: Applied the change to idle workers too and updated comments and patch description a bit. Signed-off-by: Lai Jiangshan Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 692d976..c462cd6 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1396,12 +1396,15 @@ retry: /* set REBIND and kick idle ones, we'll wait for these later */ for_each_worker_pool(pool, gcwq) { list_for_each_entry(worker, &pool->idle_list, entry) { + unsigned long worker_flags = worker->flags; + if (worker->flags & WORKER_REBIND) continue; - /* morph UNBOUND to REBIND */ - worker->flags &= ~WORKER_UNBOUND; - worker->flags |= WORKER_REBIND; + /* morph UNBOUND to REBIND atomically */ + worker_flags &= ~WORKER_UNBOUND; + worker_flags |= WORKER_REBIND; + ACCESS_ONCE(worker->flags) = worker_flags; idle_rebind.cnt++; worker->idle_rebind = &idle_rebind; @@ -1434,10 +1437,12 @@ retry: /* rebind busy workers */ for_each_busy_worker(worker, i, pos, gcwq) { struct work_struct *rebind_work = &worker->rebind_work; + unsigned long worker_flags = worker->flags; - /* morph UNBOUND to REBIND */ - worker->flags &= ~WORKER_UNBOUND; - worker->flags |= WORKER_REBIND; + /* morph UNBOUND to REBIND atomically */ + worker_flags &= ~WORKER_UNBOUND; + worker_flags |= WORKER_REBIND; + ACCESS_ONCE(worker->flags) = worker_flags; if (test_and_set_bit(WORK_STRUCT_PENDING_BIT, work_data_bits(rebind_work))) -- cgit v0.10.2 From e534e871a94ba2e3bfdf0edd3685eb805fc960d8 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Tue, 4 Sep 2012 17:22:45 -0700 Subject: ARM: OMAP4: Fix array size for irq_target_cpu If NR_IRQS is less than MAX_IRQS, we end up writing past the irq_target_cpu array in omap_wakeupgen_init(): /* Associate all the IRQs to boot CPU like GIC init does. */ for (i = 0; i < max_irqs; i++) irq_target_cpu[i] = boot_cpu; This can happen if SPARSE_IRQ is enabled as by default NR_IRQS is set to 16. Without this patch we're overwriting other data during the boot. Looks like a similar fix was posted by Benoit Cousson earlier as "ARM: OMAP2+: wakeupgen: Fix wrong array size for irq_target_cpu" but was lost. Cc: stable@vger.kernel.org Acked-by: Santosh Shilimkar Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/omap-wakeupgen.c b/arch/arm/mach-omap2/omap-wakeupgen.c index 05fdebf..330d4c6 100644 --- a/arch/arm/mach-omap2/omap-wakeupgen.c +++ b/arch/arm/mach-omap2/omap-wakeupgen.c @@ -46,7 +46,7 @@ static void __iomem *wakeupgen_base; static void __iomem *sar_base; static DEFINE_SPINLOCK(wakeupgen_lock); -static unsigned int irq_target_cpu[NR_IRQS]; +static unsigned int irq_target_cpu[MAX_IRQS]; static unsigned int irq_banks = MAX_NR_REG_BANKS; static unsigned int max_irqs = MAX_IRQS; static unsigned int omap_secure_apis; -- cgit v0.10.2 From 037a833ed05a86d01ea27a2c32043b86c549be1b Mon Sep 17 00:00:00 2001 From: Forest Bond Date: Tue, 4 Sep 2012 20:27:37 -0700 Subject: Input: usbtouchscreen - initialize eGalax devices Certain eGalax devices expose an interface with class HID and protocol None. Some work with usbhid and some work with usbtouchscreen, but there is no easy way to differentiate. Sending an eGalax diagnostic packet seems to kick them all into using the right protocol for usbtouchscreen, so we can continue to bind them all there (as opposed to handing some off to usbhid). This fixes a regression for devices that were claimed by (and worked with) usbhid prior to commit 139ebe8dc80dd74cb2ac9f5603d18fbf5cff049f ("Input: usbtouchscreen - fix eGalax HID ignoring"), which made usbtouchscreen claim them instead. With this patch they will still be claimed by usbtouchscreen, but they will actually report events usbtouchscreen can understand. Note that these devices will be limited to the usbtouchscreen feature set so e.g. dual touch features are not supported. I have the distinct pleasure of needing to support devices of both types and have tested accordingly. Signed-off-by: Forest Bond Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/usbtouchscreen.c b/drivers/input/touchscreen/usbtouchscreen.c index e32709e..721fdb3 100644 --- a/drivers/input/touchscreen/usbtouchscreen.c +++ b/drivers/input/touchscreen/usbtouchscreen.c @@ -304,6 +304,45 @@ static int e2i_read_data(struct usbtouch_usb *dev, unsigned char *pkt) #define EGALAX_PKT_TYPE_REPT 0x80 #define EGALAX_PKT_TYPE_DIAG 0x0A +static int egalax_init(struct usbtouch_usb *usbtouch) +{ + int ret, i; + unsigned char *buf; + struct usb_device *udev = interface_to_usbdev(usbtouch->interface); + + /* + * An eGalax diagnostic packet kicks the device into using the right + * protocol. We send a "check active" packet. The response will be + * read later and ignored. + */ + + buf = kmalloc(3, GFP_KERNEL); + if (!buf) + return -ENOMEM; + + buf[0] = EGALAX_PKT_TYPE_DIAG; + buf[1] = 1; /* length */ + buf[2] = 'A'; /* command - check active */ + + for (i = 0; i < 3; i++) { + ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), + 0, + USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, + 0, 0, buf, 3, + USB_CTRL_SET_TIMEOUT); + if (ret >= 0) { + ret = 0; + break; + } + if (ret != -EPIPE) + break; + } + + kfree(buf); + + return ret; +} + static int egalax_read_data(struct usbtouch_usb *dev, unsigned char *pkt) { if ((pkt[0] & EGALAX_PKT_TYPE_MASK) != EGALAX_PKT_TYPE_REPT) @@ -1056,6 +1095,7 @@ static struct usbtouch_device_info usbtouch_dev_info[] = { .process_pkt = usbtouch_process_multi, .get_pkt_len = egalax_get_pkt_len, .read_data = egalax_read_data, + .init = egalax_init, }, #endif -- cgit v0.10.2 From 609455f481772c5a875b88e860a2ee0e2f25ebf0 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Tue, 4 Sep 2012 20:27:38 -0700 Subject: Input: imx_keypad - fix missing clk conversions commit a1e636e6d3 (Input: imx_keypad - use clk_prepare_enable/ clk_disable_unprepare()) missed to update clk_enable/clk_disable in imx_keypad_probe(). Fix it so that we do not get clk warnings at boot. Signed-off-by: Fabio Estevam Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/imx_keypad.c b/drivers/input/keyboard/imx_keypad.c index ce68e36..cdc2526 100644 --- a/drivers/input/keyboard/imx_keypad.c +++ b/drivers/input/keyboard/imx_keypad.c @@ -516,9 +516,9 @@ static int __devinit imx_keypad_probe(struct platform_device *pdev) input_set_drvdata(input_dev, keypad); /* Ensure that the keypad will stay dormant until opened */ - clk_enable(keypad->clk); + clk_prepare_enable(keypad->clk); imx_keypad_inhibit(keypad); - clk_disable(keypad->clk); + clk_disable_unprepare(keypad->clk); error = request_irq(irq, imx_keypad_irq_handler, 0, pdev->name, keypad); -- cgit v0.10.2 From 15674868d6c5985466835c56dd89d39235f16302 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 4 Sep 2012 13:55:05 +0530 Subject: mm/memblock: Use NULL instead of 0 for pointers This type cleanup also fixes the following sparse warning: mm/memblock.c:249:49: warning: Using plain integer as NULL pointer Signed-off-by: Sachin Kamat Acked-by: Tejun Heo Cc: Andrew Morton Cc: patches@linaro.org Cc: linux-mm@kvack.org Signed-off-by: Ingo Molnar diff --git a/mm/memblock.c b/mm/memblock.c index 4d9393c..82aa349 100644 --- a/mm/memblock.c +++ b/mm/memblock.c @@ -246,7 +246,7 @@ static int __init_memblock memblock_double_array(struct memblock_type *type, min(new_area_start, memblock.current_limit), new_alloc_size, PAGE_SIZE); - new_array = addr ? __va(addr) : 0; + new_array = addr ? __va(addr) : NULL; } if (!addr) { pr_err("memblock: Failed to double %s array from %ld to %ld entries !\n", -- cgit v0.10.2 From 4454d32749465ffa77d82bc1fdd196d6dedc544b Mon Sep 17 00:00:00 2001 From: Joe Millenbach Date: Sun, 2 Sep 2012 17:38:20 -0700 Subject: x86/kconfig: Remove outdated reference to Intel CPUs in CONFIG_SWIOTLB Deleted the no longer valid example of which x86 CPUs lack a hardware IOMMU, and moved the "If unsure..." statement to a new line to follow the style of surrounding options. Signed-off-by: Joe Millenbach Reviewed-by: Josh Triplett Cc: team-fjord@googlegroups.com Cc: Konrad Rzeszutek Wilk Link: http://lkml.kernel.org/r/1346632700-29113-1-git-send-email-jmillenbach@gmail.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 8ec3a1a..50a1d1f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -746,10 +746,10 @@ config SWIOTLB def_bool y if X86_64 ---help--- Support for software bounce buffers used on x86-64 systems - which don't have a hardware IOMMU (e.g. the current generation - of Intel's x86-64 CPUs). Using this PCI devices which can only - access 32-bits of memory can be used on systems with more than - 3 GB of memory. If unsure, say Y. + which don't have a hardware IOMMU. Using this PCI devices + which can only access 32-bits of memory can be used on systems + with more than 3 GB of memory. + If unsure, say Y. config IOMMU_HELPER def_bool (CALGARY_IOMMU || GART_IOMMU || SWIOTLB || AMD_IOMMU) -- cgit v0.10.2 From 9c2fc0de1a6e638fe58c354a463f544f42a90a09 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Wed, 5 Sep 2012 15:48:23 +0200 Subject: udf: Fix data corruption for files in ICB When a file is stored in ICB (inode), we overwrite part of the file, and the page containing file's data is not in page cache, we end up corrupting file's data by overwriting them with zeros. The problem is we use simple_write_begin() which simply zeroes parts of the page which are not written to. The problem has been introduced by be021ee4 (udf: convert to new aops). Fix the problem by providing a ->write_begin function which makes the page properly uptodate. CC: # >= 2.6.24 Reported-by: Ian Abbott Signed-off-by: Jan Kara diff --git a/fs/udf/file.c b/fs/udf/file.c index 7f3f7ba..d1c6093 100644 --- a/fs/udf/file.c +++ b/fs/udf/file.c @@ -39,20 +39,24 @@ #include "udf_i.h" #include "udf_sb.h" -static int udf_adinicb_readpage(struct file *file, struct page *page) +static void __udf_adinicb_readpage(struct page *page) { struct inode *inode = page->mapping->host; char *kaddr; struct udf_inode_info *iinfo = UDF_I(inode); - BUG_ON(!PageLocked(page)); - kaddr = kmap(page); - memset(kaddr, 0, PAGE_CACHE_SIZE); memcpy(kaddr, iinfo->i_ext.i_data + iinfo->i_lenEAttr, inode->i_size); + memset(kaddr + inode->i_size, 0, PAGE_CACHE_SIZE - inode->i_size); flush_dcache_page(page); SetPageUptodate(page); kunmap(page); +} + +static int udf_adinicb_readpage(struct file *file, struct page *page) +{ + BUG_ON(!PageLocked(page)); + __udf_adinicb_readpage(page); unlock_page(page); return 0; @@ -77,6 +81,25 @@ static int udf_adinicb_writepage(struct page *page, return 0; } +static int udf_adinicb_write_begin(struct file *file, + struct address_space *mapping, loff_t pos, + unsigned len, unsigned flags, struct page **pagep, + void **fsdata) +{ + struct page *page; + + if (WARN_ON_ONCE(pos >= PAGE_CACHE_SIZE)) + return -EIO; + page = grab_cache_page_write_begin(mapping, 0, flags); + if (!page) + return -ENOMEM; + *pagep = page; + + if (!PageUptodate(page) && len != PAGE_CACHE_SIZE) + __udf_adinicb_readpage(page); + return 0; +} + static int udf_adinicb_write_end(struct file *file, struct address_space *mapping, loff_t pos, unsigned len, unsigned copied, @@ -98,8 +121,8 @@ static int udf_adinicb_write_end(struct file *file, const struct address_space_operations udf_adinicb_aops = { .readpage = udf_adinicb_readpage, .writepage = udf_adinicb_writepage, - .write_begin = simple_write_begin, - .write_end = udf_adinicb_write_end, + .write_begin = udf_adinicb_write_begin, + .write_end = udf_adinicb_write_end, }; static ssize_t udf_file_aio_write(struct kiocb *iocb, const struct iovec *iov, -- cgit v0.10.2 From 7ce8c7a3433c6d6f4adfec0611d250782f0b4b0c Mon Sep 17 00:00:00 2001 From: LEO Airwarosu Yoichi Shinoda Date: Mon, 27 Aug 2012 22:28:16 +0900 Subject: mac80211: Various small fixes for cfg.c: mpath_set_pinfo() Various small fixes for net/mac80211/cfg.c:mpath_set_pinfo(): Initialize *pinfo before filling members in, handle MESH_PATH_RESOLVED correctly, and remove bogus assignment; result in correct display of FLAGS values and meaningful EXPTIME for expired paths in iw utility. Signed-off-by: Yoichi Shinoda Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index d41974a..a58c0b6 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1378,6 +1378,8 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, else memset(next_hop, 0, ETH_ALEN); + memset(pinfo, 0, sizeof(*pinfo)); + pinfo->generation = mesh_paths_generation; pinfo->filled = MPATH_INFO_FRAME_QLEN | @@ -1396,7 +1398,6 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, pinfo->discovery_timeout = jiffies_to_msecs(mpath->discovery_timeout); pinfo->discovery_retries = mpath->discovery_retries; - pinfo->flags = 0; if (mpath->flags & MESH_PATH_ACTIVE) pinfo->flags |= NL80211_MPATH_FLAG_ACTIVE; if (mpath->flags & MESH_PATH_RESOLVING) @@ -1405,10 +1406,8 @@ static void mpath_set_pinfo(struct mesh_path *mpath, u8 *next_hop, pinfo->flags |= NL80211_MPATH_FLAG_SN_VALID; if (mpath->flags & MESH_PATH_FIXED) pinfo->flags |= NL80211_MPATH_FLAG_FIXED; - if (mpath->flags & MESH_PATH_RESOLVING) - pinfo->flags |= NL80211_MPATH_FLAG_RESOLVING; - - pinfo->flags = mpath->flags; + if (mpath->flags & MESH_PATH_RESOLVED) + pinfo->flags |= NL80211_MPATH_FLAG_RESOLVED; } static int ieee80211_get_mpath(struct wiphy *wiphy, struct net_device *dev, -- cgit v0.10.2 From da25186fc605af8ad636073621fa326fbc23a130 Mon Sep 17 00:00:00 2001 From: Stone Piao Date: Wed, 22 Aug 2012 20:26:31 -0700 Subject: mwifiex: fix skb length issue when send a command to firmware When we send a command to firmware, we assumed that cmd_size will be always less than or equal to the structure size of host_cmd_ds_command. However, this is no longer true after we added AP support. There are some AP commands that Custom IE TLVs are included in command buffer, hence the cmd_size gets enlarged by the TLV data. We need to increase the skb length for the extra data. Signed-off-by: Stone Piao Signed-off-by: Avinash Patil Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/cmdevt.c b/drivers/net/wireless/mwifiex/cmdevt.c index c68adec..565527a 100644 --- a/drivers/net/wireless/mwifiex/cmdevt.c +++ b/drivers/net/wireless/mwifiex/cmdevt.c @@ -170,7 +170,20 @@ static int mwifiex_dnld_cmd_to_fw(struct mwifiex_private *priv, cmd_code = le16_to_cpu(host_cmd->command); cmd_size = le16_to_cpu(host_cmd->size); - skb_trim(cmd_node->cmd_skb, cmd_size); + /* Adjust skb length */ + if (cmd_node->cmd_skb->len > cmd_size) + /* + * cmd_size is less than sizeof(struct host_cmd_ds_command). + * Trim off the unused portion. + */ + skb_trim(cmd_node->cmd_skb, cmd_size); + else if (cmd_node->cmd_skb->len < cmd_size) + /* + * cmd_size is larger than sizeof(struct host_cmd_ds_command) + * because we have appended custom IE TLV. Increase skb length + * accordingly. + */ + skb_put(cmd_node->cmd_skb, cmd_size - cmd_node->cmd_skb->len); do_gettimeofday(&tstamp); dev_dbg(adapter->dev, "cmd: DNLD_CMD: (%lu.%lu): %#x, act %#x, len %d," -- cgit v0.10.2 From d0f21fe6585dda550b279ceccd2609111d7f1baa Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Mon, 27 Aug 2012 00:26:37 +0200 Subject: rt2x00: fix voltage setting for RT3572/RT3592 According to the vendor driver v2.6.0.1, during the rf register init the SRAM voltage should be increased to 1.35V and after 1ms decreased back to 1.2V. This patch adds the field setting of LDO_CFG0_LDO_CORE_VLEVEL accordingly. Cc: Gertjan van Wingerde Signed-off-by: Marc Kleine-Budde Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index cb8c2ac..b93516d 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -4089,6 +4089,7 @@ static int rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) rt2800_register_write(rt2x00dev, LDO_CFG0, reg); msleep(1); rt2800_register_read(rt2x00dev, LDO_CFG0, ®); + rt2x00_set_field32(®, LDO_CFG0_LDO_CORE_VLEVEL, 0); rt2x00_set_field32(®, LDO_CFG0_BGSEL, 1); rt2800_register_write(rt2x00dev, LDO_CFG0, reg); } -- cgit v0.10.2 From 280b9a9de19b0819dcf1ab38c88e37bb82dbea0c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 27 Aug 2012 17:00:03 +0200 Subject: ath9k_hw: do not enable the MIB interrupt in the interrupt mask register The interrupt is no longer handling it. While it shouldn't fire (wraparound is highly unlikely), the consequences would be fatal (interrupt storm). Disable the interrupt to prevent that from happening. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 60b6a9d..d95474e 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -978,9 +978,6 @@ static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah, else imr_reg |= AR_IMR_TXOK; - if (opmode == NL80211_IFTYPE_AP) - imr_reg |= AR_IMR_MIB; - ENABLE_REGWRITE_BUFFER(ah); REG_WRITE(ah, AR_IMR, imr_reg); -- cgit v0.10.2 From 26228959938b25bd41311a3f133a695b9da60e72 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 27 Aug 2012 17:00:04 +0200 Subject: ath9k_hw: clear the AM2PM predistortion mask on AR933x That predistortion type is not supported Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 2c9f7d7..2173bd7 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -142,6 +142,7 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah) }; int training_power; int i, val; + u32 am2pm_mask = ah->paprd_ratemask; if (IS_CHAN_2GHZ(ah->curchan)) training_power = ar9003_get_training_power_2g(ah); @@ -158,10 +159,13 @@ static int ar9003_paprd_setup_single_table(struct ath_hw *ah) } ah->paprd_training_power = training_power; + if (AR_SREV_9330(ah)) + am2pm_mask = 0; + REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK, ah->paprd_ratemask); REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK, - ah->paprd_ratemask); + am2pm_mask); REG_RMW_FIELD(ah, AR_PHY_PAPRD_HT40, AR_PHY_PAPRD_HT40_MASK, ah->paprd_ratemask_ht40); -- cgit v0.10.2 From 381c726c09bb43aea8088ede5ce24eaa158289dc Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 27 Aug 2012 17:00:05 +0200 Subject: ath9k_hw: calibrate PA input for PA predistortion Re-train if the calibrated PA linearization curve is out of bounds (affects AR933x and AR9485). Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 2173bd7..0ed3846 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -786,6 +786,102 @@ int ar9003_paprd_setup_gain_table(struct ath_hw *ah, int chain) } EXPORT_SYMBOL(ar9003_paprd_setup_gain_table); +static bool ar9003_paprd_retrain_pa_in(struct ath_hw *ah, + struct ath9k_hw_cal_data *caldata, + int chain) +{ + u32 *pa_in = caldata->pa_table[chain]; + int capdiv_offset, quick_drop_offset; + int capdiv2g, quick_drop; + int count = 0; + int i; + + if (!AR_SREV_9485(ah) && !AR_SREV_9330(ah)) + return false; + + capdiv2g = REG_READ_FIELD(ah, AR_PHY_65NM_CH0_TXRF3, + AR_PHY_65NM_CH0_TXRF3_CAPDIV2G); + + quick_drop = REG_READ_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3, + AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP); + + if (quick_drop) + quick_drop -= 0x40; + + for (i = 0; i < NUM_BIN + 1; i++) { + if (pa_in[i] == 1400) + count++; + } + + if (AR_SREV_9485(ah)) { + if (pa_in[23] < 800) { + capdiv_offset = (int)((1000 - pa_in[23] + 75) / 150); + capdiv2g += capdiv_offset; + if (capdiv2g > 7) { + capdiv2g = 7; + if (pa_in[23] < 600) { + quick_drop++; + if (quick_drop > 0) + quick_drop = 0; + } + } + } else if (pa_in[23] == 1400) { + quick_drop_offset = min_t(int, count / 3, 2); + quick_drop += quick_drop_offset; + capdiv2g += quick_drop_offset / 2; + + if (capdiv2g > 7) + capdiv2g = 7; + + if (quick_drop > 0) { + quick_drop = 0; + capdiv2g -= quick_drop_offset; + if (capdiv2g < 0) + capdiv2g = 0; + } + } else { + return false; + } + } else if (AR_SREV_9330(ah)) { + if (pa_in[23] < 1000) { + capdiv_offset = (1000 - pa_in[23]) / 100; + capdiv2g += capdiv_offset; + if (capdiv_offset > 3) { + capdiv_offset = 1; + quick_drop--; + } + + capdiv2g += capdiv_offset; + if (capdiv2g > 6) + capdiv2g = 6; + if (quick_drop < -4) + quick_drop = -4; + } else if (pa_in[23] == 1400) { + if (count > 3) { + quick_drop++; + capdiv2g -= count / 4; + if (quick_drop > -2) + quick_drop = -2; + } else { + capdiv2g--; + } + + if (capdiv2g < 0) + capdiv2g = 0; + } else { + return false; + } + } + + REG_RMW_FIELD(ah, AR_PHY_65NM_CH0_TXRF3, + AR_PHY_65NM_CH0_TXRF3_CAPDIV2G, capdiv2g); + REG_RMW_FIELD(ah, AR_PHY_PAPRD_TRAINER_CNTL3, + AR_PHY_PAPRD_TRAINER_CNTL3_CF_PAPRD_QUICK_DROP, + quick_drop); + + return true; +} + int ar9003_paprd_create_curve(struct ath_hw *ah, struct ath9k_hw_cal_data *caldata, int chain) { @@ -821,6 +917,9 @@ int ar9003_paprd_create_curve(struct ath_hw *ah, if (!create_pa_curve(data_L, data_U, pa_table, small_signal_gain)) status = -2; + if (ar9003_paprd_retrain_pa_in(ah, caldata, chain)) + status = -EINPROGRESS; + REG_CLR_BIT(ah, AR_PHY_PAPRD_TRAINER_STAT1, AR_PHY_PAPRD_TRAINER_STAT1_PAPRD_TRAIN_DONE); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 7bfbaf0..84d3d49 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -625,6 +625,10 @@ #define AR_PHY_AIC_CTRL_4_B0 (AR_SM_BASE + 0x4c0) #define AR_PHY_AIC_STAT_2_B0 (AR_SM_BASE + 0x4cc) +#define AR_PHY_65NM_CH0_TXRF3 0x16048 +#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G 0x0000001e +#define AR_PHY_65NM_CH0_TXRF3_CAPDIV2G_S 1 + #define AR_PHY_65NM_CH0_SYNTH4 0x1608c #define AR_PHY_SYNTH4_LONG_SHIFT_SELECT (AR_SREV_9462(ah) ? 0x00000001 : 0x00000002) #define AR_PHY_SYNTH4_LONG_SHIFT_SELECT_S (AR_SREV_9462(ah) ? 0 : 1) diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index d4549e9..1c24192 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -254,6 +254,7 @@ void ath_paprd_calibrate(struct work_struct *work) int chain_ok = 0; int chain; int len = 1800; + int ret; if (!caldata) return; @@ -302,7 +303,13 @@ void ath_paprd_calibrate(struct work_struct *work) break; } - if (ar9003_paprd_create_curve(ah, caldata, chain)) { + ret = ar9003_paprd_create_curve(ah, caldata, chain); + if (ret == -EINPROGRESS) { + ath_dbg(common, CALIBRATE, + "PAPRD curve on chain %d needs to be re-trained\n", + chain); + break; + } else if (ret) { ath_dbg(common, CALIBRATE, "PAPRD create curve failed on chain %d\n", chain); -- cgit v0.10.2 From 1630d25fd00f195f0923d4b895e0529fdbba83c3 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 27 Aug 2012 17:00:06 +0200 Subject: ath9k_hw: disable PA linearization for AR9462 Support for it is incomplete Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index d95474e..64a00d2 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2499,7 +2499,8 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->tx_desc_len = sizeof(struct ar9003_txc); pCap->txs_len = sizeof(struct ar9003_txs); if (!ah->config.paprd_disable && - ah->eep_ops->get_eeprom(ah, EEP_PAPRD)) + ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && + !AR_SREV_9462(ah)) pCap->hw_caps |= ATH9K_HW_CAP_PAPRD; } else { pCap->tx_desc_len = sizeof(struct ath_desc); -- cgit v0.10.2 From 51dea9be7e01d7e825ed1882246693f09c21374c Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 27 Aug 2012 17:00:07 +0200 Subject: ath9k: fix PA linearization calibration related crash Before PAPRD training can run, the card needs to have sent a packet for thermal calibration. Sending a dummy packet with the PAPRD training flag set causes a crash under some circumstance. Fix the code by replacing the dummy tx with a delay that waits for a real packet tx to have occurred. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 64a00d2..e4b9f35 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1775,6 +1775,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, /* Operating channel changed, reset channel calibration data */ memset(caldata, 0, sizeof(*caldata)); ath9k_init_nfcal_hist_buffer(ah, chan); + } else if (caldata) { + caldata->paprd_packet_sent = false; } ah->noise = ath9k_hw_getchan_noise(ah, chan); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index ce7332c..6599a75 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -405,6 +405,7 @@ struct ath9k_hw_cal_data { int8_t iCoff; int8_t qCoff; bool rtt_done; + bool paprd_packet_sent; bool paprd_done; bool nfcal_pending; bool nfcal_interference; diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index 1c24192..825a29c 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -256,7 +256,7 @@ void ath_paprd_calibrate(struct work_struct *work) int len = 1800; int ret; - if (!caldata) + if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done) return; ath9k_ps_wakeup(sc); @@ -283,13 +283,6 @@ void ath_paprd_calibrate(struct work_struct *work) continue; chain_ok = 0; - - ath_dbg(common, CALIBRATE, - "Sending PAPRD frame for thermal measurement on chain %d\n", - chain); - if (!ath_paprd_send_frame(sc, skb, chain)) - goto fail_paprd; - ar9003_paprd_setup_gain_table(ah, chain); ath_dbg(common, CALIBRATE, diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 2c9da6b..0d4155a 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2018,6 +2018,9 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb); + if (sc->sc_ah->caldata) + sc->sc_ah->caldata->paprd_packet_sent = true; + if (!(tx_flags & ATH_TX_ERROR)) /* Frame was ACKed */ tx_info->flags |= IEEE80211_TX_STAT_ACK; -- cgit v0.10.2 From b3ccc1a56280119fe1fbf9929a76b4034358bfef Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 27 Aug 2012 17:00:08 +0200 Subject: ath9k_hw: enable PA linearization This feature had been disabled in ath9k because the code to support it was incomplete, but now the code is in sync with the internal QCA codebase, so it's time to enable it. On many newer devices, the calibration is assumed to be done with PA linearization enabled. Tests with a particular AR933x device showed that the signal emitted at full power was highly distorted and unreliable with PA linearization disabled. With this patch, the signal becomes clear and stability is improved. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index e4b9f35..48af401 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -463,9 +463,6 @@ static void ath9k_hw_init_config(struct ath_hw *ah) ah->config.spurchans[i][1] = AR_NO_SPUR; } - /* PAPRD needs some more work to be enabled */ - ah->config.paprd_disable = 1; - ah->config.rx_intr_mitigation = true; ah->config.pcieSerDesWrite = true; -- cgit v0.10.2 From 5d9b6f263995d7f43202d76cf2e23d43f9240a90 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Tue, 28 Aug 2012 12:14:48 +0530 Subject: ath9k: Fix a crash in 2 WIRE btcoex chipsets Generic timers for BTCOEX functionality is applicable only for 3 WIRE BTCOEX (and MCI) chipsets. Hence btcoex->no_stomp_timer is allocated only 3 WIRE btcoex chipsets and in all the other cases its NULL. Make sure we stop the generic timer only if 'btcoex->hw_timer_enabled' is true(only if its up and running) Fixes the following crash [68757.020454] BUG: unable to handle kernel NULL pointer dereference at 0000000c [68757.020916] IP: [] ath9k_hw_gen_timer_stop+0x13/0x80 [ath9k_hw] [68757.021251] *pde = 00000000 [68757.024384] EIP: 0060:[] EFLAGS: 00010082 CPU: 0 [68757.024384] EIP is at ath9k_hw_gen_timer_stop+0x13/0x80 [ath9k_hw] [68757.024384] EAX: d32d0000 EBX: d32d0000 ECX: 00000000 EDX: 00000000 [68757.024384] ESI: e67c24c0 EDI: 00000296 EBP: e137be2c ESP: e137be20 [68757.024384] DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 [68757.024384] CR0: 8005003b CR2: 0000000c CR3: 00b99000 CR4: 000407d0 [68757.024384] DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 [68757.024384] DR6: ffff0ff0 DR7: 00000400 [68757.024384] Process kworker/u:2 (pid: 8917, ti=e137a000 task=ea7a6860 task.ti=e137a000) [68757.024384] Stack: [68757.024384] c06c4676 d32d0000 e67c24c0 e137be38 f81c9590 e67c1ca0 e137be40 f81c95d9 [68757.024384] e137be64 f81cd1c5 00000246 00000002 d32d0000 e67c05e0 e67c1ca0 e67c05e0 [68757.024384] 00000000 e137beac f81cdfa0 e137be84 00000246 00000246 e67c1ca0 e67c1ca0 [68757.024384] Call Trace: [68757.024384] [] ? _raw_spin_lock_irqsave+0x86/0xa0 [68757.024384] [] ath9k_gen_timer_stop+0x10/0x40 [ath9k] [68757.024384] [] ath9k_btcoex_stop_gen_timer+0x19/0x20 [ath9k] [68757.024384] [] ath9k_ps_restore+0x85/0x110 [ath9k] [68757.024384] [] ath9k_config+0x220/0x520 [ath9k] [68757.024384] [] ? ath9k_flush+0x15d/0x1b0 [ath9k] [68757.024384] [] ieee80211_hw_config+0x135/0x2c0 [mac80211] [68757.024384] [] ieee80211_dynamic_ps_enable_work+0x198/0x5f0 [mac80211] Cc: Rajkumar Manoharan Cc: Bala Shanmugam Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c index bacdb8f..9f83f71 100644 --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c @@ -341,7 +341,8 @@ void ath9k_btcoex_stop_gen_timer(struct ath_softc *sc) { struct ath_btcoex *btcoex = &sc->btcoex; - ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer); + if (btcoex->hw_timer_enabled) + ath9k_gen_timer_stop(sc->sc_ah, btcoex->no_stomp_timer); } u16 ath9k_btcoex_aggr_limit(struct ath_softc *sc, u32 max_4ms_framelen) -- cgit v0.10.2 From 01e3331b30b48fe96d016435707af050700c8421 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Thu, 30 Aug 2012 10:05:34 +0200 Subject: brcmfmac: fix use of dev_kfree_skb() in irq context The USB part of the brcmfmac did a dev_kfree_skb() that resulted in a warning in net/core/skbuff.c: Jul 11 04:53:33 lb-bun-10 kernel: [53282.667745] WARNING: at net/core/skbuff.c:490 skb_release_head_state+0xcc/0xe0() The brcmutil modules provides brcmu_pkt_buf_free_skb() which takes the context into account. This patch makes use of this function instead of dev_kfree_skb(). Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index a299d42..f72dfb7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -519,7 +519,7 @@ static void brcmf_usb_tx_complete(struct urb *urb) else devinfo->bus_pub.bus->dstats.tx_errors++; - dev_kfree_skb(req->skb); + brcmu_pkt_buf_free_skb(req->skb); req->skb = NULL; brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req); @@ -540,7 +540,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) devinfo->bus_pub.bus->dstats.rx_packets++; } else { devinfo->bus_pub.bus->dstats.rx_errors++; - dev_kfree_skb(skb); + brcmu_pkt_buf_free_skb(skb); brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); return; } @@ -556,7 +556,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) brcmf_usb_rx_refill(devinfo, req); } } else { - dev_kfree_skb(skb); + brcmu_pkt_buf_free_skb(skb); } return; @@ -588,7 +588,7 @@ static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo, if (ret == 0) { brcmf_usb_enq(devinfo, &devinfo->rx_postq, req); } else { - dev_kfree_skb(req->skb); + brcmu_pkt_buf_free_skb(req->skb); req->skb = NULL; brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); } -- cgit v0.10.2 From 474ab7cea4001f07ec8599a680fd19d8761fa7d8 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Thu, 30 Aug 2012 10:05:35 +0200 Subject: brcmfmac: dont use ZERO flag for usb IN URB_ZERO_PACKET should only be set or bulk OUT and this condition is checked with a WARN_ON in usb_submit_urb(). This patch fixes brcmfmac to get rid of this warning filling the logs. Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index f72dfb7..8ea2db7 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -581,7 +581,6 @@ static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo, usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->rx_pipe, skb->data, skb_tailroom(skb), brcmf_usb_rx_complete, req); - req->urb->transfer_flags |= URB_ZERO_PACKET; req->devinfo = devinfo; ret = usb_submit_urb(req->urb, GFP_ATOMIC); -- cgit v0.10.2 From 2e875acd399fcc6e301063e5ead371ad089d5920 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Thu, 30 Aug 2012 10:05:36 +0200 Subject: brcmfmac: fix race condition for rx and tx data. On both rx and tx there is was a race condition on the queueing of usb requests. When for example frame gets submitted it is possible that complete function gets called even before usb_submit_urb() returns. As a result it is possible that usb requests get losts, which was noticed on OMAP4 pandaboard platform. This patch fixes the race condition. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 8ea2db7..58f89fa 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -550,6 +550,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) if (brcmf_proto_hdrpull(devinfo->dev, &ifidx, skb) != 0) { brcmf_dbg(ERROR, "rx protocol error\n"); brcmu_pkt_buf_free_skb(skb); + brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); devinfo->bus_pub.bus->dstats.rx_errors++; } else { brcmf_rx_packet(devinfo->dev, ifidx, skb); @@ -557,6 +558,7 @@ static void brcmf_usb_rx_complete(struct urb *urb) } } else { brcmu_pkt_buf_free_skb(skb); + brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); } return; @@ -582,11 +584,11 @@ static void brcmf_usb_rx_refill(struct brcmf_usbdev_info *devinfo, skb->data, skb_tailroom(skb), brcmf_usb_rx_complete, req); req->devinfo = devinfo; + brcmf_usb_enq(devinfo, &devinfo->rx_postq, req); ret = usb_submit_urb(req->urb, GFP_ATOMIC); - if (ret == 0) { - brcmf_usb_enq(devinfo, &devinfo->rx_postq, req); - } else { + if (ret) { + brcmf_usb_del_fromq(devinfo, req); brcmu_pkt_buf_free_skb(req->skb); req->skb = NULL; brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req); @@ -682,23 +684,22 @@ static int brcmf_usb_tx(struct device *dev, struct sk_buff *skb) req = brcmf_usb_deq(devinfo, &devinfo->tx_freeq); if (!req) { + brcmu_pkt_buf_free_skb(skb); brcmf_dbg(ERROR, "no req to send\n"); return -ENOMEM; } - if (!req->urb) { - brcmf_dbg(ERROR, "no urb for req %p\n", req); - return -ENOBUFS; - } req->skb = skb; req->devinfo = devinfo; usb_fill_bulk_urb(req->urb, devinfo->usbdev, devinfo->tx_pipe, skb->data, skb->len, brcmf_usb_tx_complete, req); req->urb->transfer_flags |= URB_ZERO_PACKET; + brcmf_usb_enq(devinfo, &devinfo->tx_postq, req); ret = usb_submit_urb(req->urb, GFP_ATOMIC); - if (!ret) { - brcmf_usb_enq(devinfo, &devinfo->tx_postq, req); - } else { + if (ret) { + brcmf_dbg(ERROR, "brcmf_usb_tx usb_submit_urb FAILED\n"); + brcmf_usb_del_fromq(devinfo, req); + brcmu_pkt_buf_free_skb(req->skb); req->skb = NULL; brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req); } -- cgit v0.10.2 From 7f6c562dfa52425a28933982df7d21edba7e3d71 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Thu, 30 Aug 2012 10:05:37 +0200 Subject: brcmfmac: fix get rssi by clearing getvar struct. The function brcmf_cfg80211_get_station requests the RSSI from the device. The complete structure used needs to be cleared before sending the request to firmware. Otherwise the request fails filling the logs with "Could not get rssi (-2)" messages. Reviewed-by: Arend Van Spriel Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 28c5fbb..c36e923 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -1876,16 +1876,17 @@ brcmf_cfg80211_get_station(struct wiphy *wiphy, struct net_device *ndev, } if (test_bit(WL_STATUS_CONNECTED, &cfg_priv->status)) { - scb_val.val = cpu_to_le32(0); + memset(&scb_val, 0, sizeof(scb_val)); err = brcmf_exec_dcmd(ndev, BRCMF_C_GET_RSSI, &scb_val, sizeof(struct brcmf_scb_val_le)); - if (err) + if (err) { WL_ERR("Could not get rssi (%d)\n", err); - - rssi = le32_to_cpu(scb_val.val); - sinfo->filled |= STATION_INFO_SIGNAL; - sinfo->signal = rssi; - WL_CONN("RSSI %d dBm\n", rssi); + } else { + rssi = le32_to_cpu(scb_val.val); + sinfo->filled |= STATION_INFO_SIGNAL; + sinfo->signal = rssi; + WL_CONN("RSSI %d dBm\n", rssi); + } } done: -- cgit v0.10.2 From 177ef8360fabdc49ff08d2598c06e7f7a36b53e3 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Fri, 31 Aug 2012 19:22:09 +0200 Subject: rt2x00: Identify ASUS USB-N53 device. This is an RT3572 based device. Signed-off-by: Maximilian Engelhardt Signed-off-by: Gertjan van Wingerde Cc: Acked-by: Ivo Van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 6cf3365..6681bfc 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1157,6 +1157,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x1690, 0x0744) }, { USB_DEVICE(0x1690, 0x0761) }, { USB_DEVICE(0x1690, 0x0764) }, + /* ASUS */ + { USB_DEVICE(0x0b05, 0x179d) }, /* Cisco */ { USB_DEVICE(0x167b, 0x4001) }, /* EnGenius */ @@ -1222,7 +1224,6 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0b05, 0x1760) }, { USB_DEVICE(0x0b05, 0x1761) }, { USB_DEVICE(0x0b05, 0x1790) }, - { USB_DEVICE(0x0b05, 0x179d) }, /* AzureWave */ { USB_DEVICE(0x13d3, 0x3262) }, { USB_DEVICE(0x13d3, 0x3284) }, -- cgit v0.10.2 From 6ced58a5dbb94dbfbea1b33ca3c56d1e929cd548 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Fri, 31 Aug 2012 19:22:10 +0200 Subject: rt2x00: Fix word size of rt2500usb MAC_CSR19 register. The register is 16 bits wide, not 32. Signed-off-by: Gertjan van Wingerde Cc: Acked-by: Ivo Van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index 3aae36b..b3a1d73 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -283,7 +283,7 @@ static int rt2500usb_rfkill_poll(struct rt2x00_dev *rt2x00dev) u16 reg; rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); - return rt2x00_get_field32(reg, MAC_CSR19_BIT7); + return rt2x00_get_field16(reg, MAC_CSR19_BIT7); } #ifdef CONFIG_RT2X00_LIB_LEDS diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index b493306..192531d 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -189,14 +189,14 @@ * MAC_CSR19: GPIO control register. */ #define MAC_CSR19 0x0426 -#define MAC_CSR19_BIT0 FIELD32(0x0001) -#define MAC_CSR19_BIT1 FIELD32(0x0002) -#define MAC_CSR19_BIT2 FIELD32(0x0004) -#define MAC_CSR19_BIT3 FIELD32(0x0008) -#define MAC_CSR19_BIT4 FIELD32(0x0010) -#define MAC_CSR19_BIT5 FIELD32(0x0020) -#define MAC_CSR19_BIT6 FIELD32(0x0040) -#define MAC_CSR19_BIT7 FIELD32(0x0080) +#define MAC_CSR19_BIT0 FIELD16(0x0001) +#define MAC_CSR19_BIT1 FIELD16(0x0002) +#define MAC_CSR19_BIT2 FIELD16(0x0004) +#define MAC_CSR19_BIT3 FIELD16(0x0008) +#define MAC_CSR19_BIT4 FIELD16(0x0010) +#define MAC_CSR19_BIT5 FIELD16(0x0020) +#define MAC_CSR19_BIT6 FIELD16(0x0040) +#define MAC_CSR19_BIT7 FIELD16(0x0080) /* * MAC_CSR20: LED control register. -- cgit v0.10.2 From a396e10019eaf3809b0219c966865aaafec12630 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Fri, 31 Aug 2012 19:22:11 +0200 Subject: rt2x00: Fix rfkill polling prior to interface start. We need to program the rfkill switch GPIO pin direction to input at device initialization time, not only when the interface is brought up. Doing this only when the interface is brought up could lead to rfkill detecting the switch is turned on erroneously and inability to create the interface and bringing it up. Reported-and-tested-by: Andreas Messer Signed-off-by: Gertjan van Wingerde Cc: Acked-by: Ivo Van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index 8b9dbd7..64328af 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1611,6 +1611,7 @@ static int rt2400pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -1624,6 +1625,14 @@ static int rt2400pci_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); + rt2x00_set_field32(®, GPIOCSR_BIT8, 1); + rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg); + + /* * Initialize hw specifications. */ retval = rt2400pci_probe_hw_mode(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2400pci.h b/drivers/net/wireless/rt2x00/rt2400pci.h index d3a4a68..7564ae9 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.h +++ b/drivers/net/wireless/rt2x00/rt2400pci.h @@ -670,6 +670,7 @@ #define GPIOCSR_BIT5 FIELD32(0x00000020) #define GPIOCSR_BIT6 FIELD32(0x00000040) #define GPIOCSR_BIT7 FIELD32(0x00000080) +#define GPIOCSR_BIT8 FIELD32(0x00000100) /* * BBPPCSR: BBP Pin control register. diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index d2cf8a4..3de0406 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1929,6 +1929,7 @@ static int rt2500pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -1942,6 +1943,14 @@ static int rt2500pci_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, GPIOCSR, ®); + rt2x00_set_field32(®, GPIOCSR_DIR0, 1); + rt2x00pci_register_write(rt2x00dev, GPIOCSR, reg); + + /* * Initialize hw specifications. */ retval = rt2500pci_probe_hw_mode(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index b3a1d73..89fee31 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -1768,6 +1768,7 @@ static int rt2500usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u16 reg; /* * Allocate eeprom data. @@ -1781,6 +1782,14 @@ static int rt2500usb_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2500usb_register_read(rt2x00dev, MAC_CSR19, ®); + rt2x00_set_field16(®, MAC_CSR19_BIT8, 0); + rt2500usb_register_write(rt2x00dev, MAC_CSR19, reg); + + /* * Initialize hw specifications. */ retval = rt2500usb_probe_hw_mode(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2500usb.h b/drivers/net/wireless/rt2x00/rt2500usb.h index 192531d..196bd51 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.h +++ b/drivers/net/wireless/rt2x00/rt2500usb.h @@ -197,6 +197,7 @@ #define MAC_CSR19_BIT5 FIELD16(0x0020) #define MAC_CSR19_BIT6 FIELD16(0x0040) #define MAC_CSR19_BIT7 FIELD16(0x0080) +#define MAC_CSR19_BIT8 FIELD16(0x0100) /* * MAC_CSR20: LED control register. diff --git a/drivers/net/wireless/rt2x00/rt2800pci.c b/drivers/net/wireless/rt2x00/rt2800pci.c index 98aa426..4765bbd 100644 --- a/drivers/net/wireless/rt2x00/rt2800pci.c +++ b/drivers/net/wireless/rt2x00/rt2800pci.c @@ -983,6 +983,7 @@ static int rt2800pci_validate_eeprom(struct rt2x00_dev *rt2x00dev) static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -996,6 +997,14 @@ static int rt2800pci_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1); + rt2x00pci_register_write(rt2x00dev, GPIO_CTRL_CFG, reg); + + /* * Initialize hw specifications. */ retval = rt2800_probe_hw_mode(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 6681bfc..52a32b5 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -736,6 +736,7 @@ static int rt2800usb_validate_eeprom(struct rt2x00_dev *rt2x00dev) static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -749,6 +750,14 @@ static int rt2800usb_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00usb_register_read(rt2x00dev, GPIO_CTRL_CFG, ®); + rt2x00_set_field32(®, GPIO_CTRL_CFG_GPIOD_BIT2, 1); + rt2x00usb_register_write(rt2x00dev, GPIO_CTRL_CFG, reg); + + /* * Initialize hw specifications. */ retval = rt2800_probe_hw_mode(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt61pci.c b/drivers/net/wireless/rt2x00/rt61pci.c index 3f7bc5c..b8ec961 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.c +++ b/drivers/net/wireless/rt2x00/rt61pci.c @@ -2832,6 +2832,7 @@ static int rt61pci_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Disable power saving. @@ -2850,6 +2851,14 @@ static int rt61pci_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00pci_register_read(rt2x00dev, MAC_CSR13, ®); + rt2x00_set_field32(®, MAC_CSR13_BIT13, 1); + rt2x00pci_register_write(rt2x00dev, MAC_CSR13, reg); + + /* * Initialize hw specifications. */ retval = rt61pci_probe_hw_mode(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt61pci.h b/drivers/net/wireless/rt2x00/rt61pci.h index e3cd6db..8f3da5a 100644 --- a/drivers/net/wireless/rt2x00/rt61pci.h +++ b/drivers/net/wireless/rt2x00/rt61pci.h @@ -372,6 +372,7 @@ struct hw_pairwise_ta_entry { #define MAC_CSR13_BIT10 FIELD32(0x00000400) #define MAC_CSR13_BIT11 FIELD32(0x00000800) #define MAC_CSR13_BIT12 FIELD32(0x00001000) +#define MAC_CSR13_BIT13 FIELD32(0x00002000) /* * MAC_CSR14: LED control register. diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index ba6e434..248436c 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2177,6 +2177,7 @@ static int rt73usb_probe_hw_mode(struct rt2x00_dev *rt2x00dev) static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) { int retval; + u32 reg; /* * Allocate eeprom data. @@ -2190,6 +2191,14 @@ static int rt73usb_probe_hw(struct rt2x00_dev *rt2x00dev) return retval; /* + * Enable rfkill polling by setting GPIO direction of the + * rfkill switch GPIO pin correctly. + */ + rt2x00usb_register_read(rt2x00dev, MAC_CSR13, ®); + rt2x00_set_field32(®, MAC_CSR13_BIT15, 0); + rt2x00usb_register_write(rt2x00dev, MAC_CSR13, reg); + + /* * Initialize hw specifications. */ retval = rt73usb_probe_hw_mode(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt73usb.h b/drivers/net/wireless/rt2x00/rt73usb.h index 9f6b470..df1cc11 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.h +++ b/drivers/net/wireless/rt2x00/rt73usb.h @@ -282,6 +282,9 @@ struct hw_pairwise_ta_entry { #define MAC_CSR13_BIT10 FIELD32(0x00000400) #define MAC_CSR13_BIT11 FIELD32(0x00000800) #define MAC_CSR13_BIT12 FIELD32(0x00001000) +#define MAC_CSR13_BIT13 FIELD32(0x00002000) +#define MAC_CSR13_BIT14 FIELD32(0x00004000) +#define MAC_CSR13_BIT15 FIELD32(0x00008000) /* * MAC_CSR14: LED control register. -- cgit v0.10.2 From efd5d6b03bd9c9e0df646c56fb5f4f3e25e5c1ac Mon Sep 17 00:00:00 2001 From: Sergei Poselenov Date: Sun, 2 Sep 2012 13:14:32 +0400 Subject: rt2800usb: Added rx packet length validity check On our system (ARM Cortex-M3 SOC running linux-2.6.33) frequent crashes were observed in the rt2800usb module because of the invalid length of the received packet (3392, 46920...). This patch adds the sanity check on the packet legth. Also, changed WARNING to ERROR in rt2x00lib_rxdone() so that the bad packet condition would be noticed. The fix was tested on the latest compat-wireless-3.5.1-1-snpc. Cc: stable@vger.kernel.org Signed-off-by: Sergei Poselenov Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 52a32b5..6b4226b 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -667,8 +667,16 @@ static void rt2800usb_fill_rxdone(struct queue_entry *entry, skb_pull(entry->skb, RXINFO_DESC_SIZE); /* - * FIXME: we need to check for rx_pkt_len validity + * Check for rx_pkt_len validity. Return if invalid, leaving + * rxdesc->size zeroed out by the upper level. */ + if (unlikely(rx_pkt_len == 0 || + rx_pkt_len > entry->queue->data_size)) { + ERROR(entry->queue->rt2x00dev, + "Bad frame size %d, forcing to 0\n", rx_pkt_len); + return; + } + rxd = (__le32 *)(entry->skb->data + rx_pkt_len); /* diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index a6b88bd..3f07e36 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -629,7 +629,7 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp) */ if (unlikely(rxdesc.size == 0 || rxdesc.size > entry->queue->data_size)) { - WARNING(rt2x00dev, "Wrong frame size %d max %d.\n", + ERROR(rt2x00dev, "Wrong frame size %d max %d.\n", rxdesc.size, entry->queue->data_size); dev_kfree_skb(entry->skb); goto renew_skb; -- cgit v0.10.2 From f10723841e624c0726c70356b31d91befed01dd6 Mon Sep 17 00:00:00 2001 From: Daniel Drake Date: Mon, 3 Sep 2012 15:49:09 -0400 Subject: libertas sdio: fix suspend when interface is down When the interface is down, the hardware is powered off. However, the suspend handler currently tries to send host sleep commands (when wakeup params are set) in this configuration, causing a system hang when going into suspend (the commands will never complete). Avoid this by detecting this situation and simply returning from the suspend handler without doing anything special. Signed-off-by: Daniel Drake Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/if_sdio.c b/drivers/net/wireless/libertas/if_sdio.c index e970897..4cb2343 100644 --- a/drivers/net/wireless/libertas/if_sdio.c +++ b/drivers/net/wireless/libertas/if_sdio.c @@ -1326,6 +1326,11 @@ static int if_sdio_suspend(struct device *dev) mmc_pm_flag_t flags = sdio_get_host_pm_caps(func); + /* If we're powered off anyway, just let the mmc layer remove the + * card. */ + if (!lbs_iface_active(card->priv)) + return -ENOSYS; + dev_info(dev, "%s: suspend: PM flags = 0x%x\n", sdio_func_id(func), flags); -- cgit v0.10.2 From 6d7d9798ad5c97ee4e911dd070dc12dc5ae55bd0 Mon Sep 17 00:00:00 2001 From: Seth Jennings Date: Wed, 29 Aug 2012 16:58:45 -0500 Subject: staging: zcache: fix cleancache race condition with shrinker This patch fixes a race condition that results in memory corruption when using cleancache. The race exists between the zcache shrinker handler, shrink_zcache_memory() and cleancache_get_page(). In most cases, the shrinker will both evict a zbpg from its buddy list and flush it from tmem before a cleancache_get_page() occurs on that page. A subsequent cleancache_get_page() will fail in the tmem layer. In the rare case that two occur together and the cleancache_get_page() path gets through the tmem layer before the shrinker path can flush tmem, zbud_decompress() does a check to see if the zbpg is a "zombie", i.e. not on a buddy list, which means the shrinker is in the process of reclaiming it. If the zbpg is a zombie, zbud_decompress() returns -EINVAL. However, this return code is being ignored by the caller, zcache_pampd_get_data_and_free(), which results in the caller of cleancache_get_page() thinking that the page has been properly retrieved when it has not. This patch modifies zcache_pampd_get_data_and_free() to convey the failure up the stack so that the caller of cleancache_get_page() knows the page retrieval failed. This needs to be applied to stable trees as well. zcache-main.c was named zcache.c before v3.1, so I'm not sure how you want to handle trees earlier than that. Signed-off-by: Seth Jennings Cc: stable Reviewed-by: Konrad Rzeszutek Wilk Reviewed-by: Minchan Kim Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index c214977..52b43b7 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1251,13 +1251,12 @@ static int zcache_pampd_get_data_and_free(char *data, size_t *bufsize, bool raw, void *pampd, struct tmem_pool *pool, struct tmem_oid *oid, uint32_t index) { - int ret = 0; - BUG_ON(!is_ephemeral(pool)); - zbud_decompress((struct page *)(data), pampd); + if (zbud_decompress((struct page *)(data), pampd) < 0) + return -EINVAL; zbud_free_and_delist((struct zbud_hdr *)pampd); atomic_dec(&zcache_curr_eph_pampd_count); - return ret; + return 0; } /* -- cgit v0.10.2 From 052c7f9ffb0e95843e75448d02664459253f9ff8 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Mon, 13 Aug 2012 19:57:03 +0300 Subject: xhci: Fix a logical vs bitwise AND bug The intent was to test whether the flag was set. This patch should be backported to stable kernels as old as 3.0, since it fixes a bug in commit e95829f474f0db3a4d940cae1423783edd966027 "xhci: Switch PPT ports to EHCI on shutdown.", which was marked for stable. Signed-off-by: Dan Carpenter Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index c59d5b5..617b0a7 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -659,7 +659,7 @@ void xhci_shutdown(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (xhci->quirks && XHCI_SPURIOUS_REBOOT) + if (xhci->quirks & XHCI_SPURIOUS_REBOOT) usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); spin_lock_irq(&xhci->lock); -- cgit v0.10.2 From e955a1cd086de4d165ae0f4c7be7289d84b63bdc Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 14 Aug 2012 16:44:49 -0400 Subject: xhci: Make handover code more robust My test platform (Intel DX79SI) boots reliably under BIOS, but frequently crashes when booting via UEFI. I finally tracked this down to the xhci handoff code. It seems that reads from the device occasionally just return 0xff, resulting in xhci_find_next_cap_offset generating a value that's larger than the resource region. We then oops when attempting to read the value. Sanity checking that value lets us avoid the crash. I've no idea what's causing the underlying problem, and xhci still doesn't actually *work* even with this, but the machine at least boots which will probably make further debugging easier. This should be backported to kernels as old as 2.6.31, that contain the commit 66d4eadd8d067269ea8fead1a50fe87c2979a80d "USB: xhci: BIOS handoff and HW initialization." Signed-off-by: Matthew Garrett Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 20b9f45..966d148 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -841,12 +841,12 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) void __iomem *op_reg_base; u32 val; int timeout; + int len = pci_resource_len(pdev, 0); if (!mmio_resource_enabled(pdev, 0)) return; - base = ioremap_nocache(pci_resource_start(pdev, 0), - pci_resource_len(pdev, 0)); + base = ioremap_nocache(pci_resource_start(pdev, 0), len); if (base == NULL) return; @@ -856,9 +856,17 @@ static void __devinit quirk_usb_handoff_xhci(struct pci_dev *pdev) */ ext_cap_offset = xhci_find_next_cap_offset(base, XHCI_HCC_PARAMS_OFFSET); do { + if ((ext_cap_offset + sizeof(val)) > len) { + /* We're reading garbage from the controller */ + dev_warn(&pdev->dev, + "xHCI controller failing to respond"); + return; + } + if (!ext_cap_offset) /* We've reached the end of the extended capabilities */ goto hc_init; + val = readl(base + ext_cap_offset); if (XHCI_EXT_CAPS_ID(val) == XHCI_EXT_CAPS_LEGACY) break; -- cgit v0.10.2 From 71c731a296f1b08a3724bd1b514b64f1bda87a23 Mon Sep 17 00:00:00 2001 From: "Alexis R. Cortes" Date: Fri, 3 Aug 2012 14:00:27 -0500 Subject: usb: host: xhci: Fix Compliance Mode on SN65LVPE502CP Hardware This patch is intended to work around a known issue on the SN65LVPE502CP USB3.0 re-driver that can delay the negotiation between a device and the host past the usual handshake timeout. If that happens on the first insertion, the host controller port will enter in Compliance Mode and NO port status event will be generated (as per xHCI Spec) making impossible to detect this event by software. The port will remain in compliance mode until a warm reset is applied to it. As a result of this, the port will seem "dead" to the user and no device connections or disconnections will be detected. For solving this, the patch creates a timer which polls every 2 seconds the link state of each host controller's port (this by reading the PORTSC register) and recovers the port by issuing a Warm reset every time Compliance mode is detected. If a xHC USB3.0 port has previously entered to U0, the compliance mode issue will NOT occur only until system resumes from sleep/hibernate, therefore, the compliance mode timer is stopped when all xHC USB 3.0 ports have entered U0. The timer is initialized again after each system resume. Since the issue is being caused by a piece of hardware, the timer will be enabled ONLY on those systems that have the SN65LVPE502CP installed (this patch uses DMI strings for detecting those systems) therefore making this patch to act as a quirk (XHCI_COMP_MODE_QUIRK has been added to the xhci stack). This patch applies for these systems: Vendor: Hewlett-Packard. System Models: Z420, Z620 and Z820. This patch should be backported to kernels as old as 3.2, as that was the first kernel to support warm reset. The kernels will need to contain both commit 10d674a82e553cb8a1f41027bb3c3e309b3f6804 "USB: When hot reset for USB3 fails, try warm reset" and commit 8bea2bd37df08aaa599aa361a9f8b836ba98e554 "usb: Add support for root hub port status CAS". The first patch add warm reset support, and the second patch modifies the USB core to issue a warm reset when the port is in compliance mode. Signed-off-by: Alexis R. Cortes Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 74bfc86..d5eb357 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -493,11 +493,48 @@ static void xhci_hub_report_link_state(u32 *status, u32 status_reg) * when this bit is set. */ pls |= USB_PORT_STAT_CONNECTION; + } else { + /* + * If CAS bit isn't set but the Port is already at + * Compliance Mode, fake a connection so the USB core + * notices the Compliance state and resets the port. + * This resolves an issue generated by the SN65LVPE502CP + * in which sometimes the port enters compliance mode + * caused by a delay on the host-device negotiation. + */ + if (pls == USB_SS_PORT_LS_COMP_MOD) + pls |= USB_PORT_STAT_CONNECTION; } + /* update status field */ *status |= pls; } +/* + * Function for Compliance Mode Quirk. + * + * This Function verifies if all xhc USB3 ports have entered U0, if so, + * the compliance mode timer is deleted. A port won't enter + * compliance mode if it has previously entered U0. + */ +void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) +{ + u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); + + if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) + return; + + if ((xhci->port_status_u0 != all_ports_seen_u0) && port_in_u0) { + xhci->port_status_u0 |= 1 << wIndex; + if (xhci->port_status_u0 == all_ports_seen_u0) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "All USB3 ports have entered U0 already!\n"); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted.\n"); + } + } +} + int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength) { @@ -651,6 +688,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Update Port Link State for super speed ports*/ if (hcd->speed == HCD_USB3) { xhci_hub_report_link_state(&status, temp); + /* + * Verify if all USB3 Ports Have entered U0 already. + * Delete Compliance Mode Timer if so. + */ + xhci_del_comp_mod_timer(xhci, temp, wIndex); } if (bus_state->port_c_suspend & (1 << wIndex)) status |= 1 << USB_PORT_FEAT_C_SUSPEND; diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 617b0a7..6ece0ed 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "xhci.h" @@ -398,6 +399,95 @@ static void xhci_msix_sync_irqs(struct xhci_hcd *xhci) #endif +static void compliance_mode_recovery(unsigned long arg) +{ + struct xhci_hcd *xhci; + struct usb_hcd *hcd; + u32 temp; + int i; + + xhci = (struct xhci_hcd *)arg; + + for (i = 0; i < xhci->num_usb3_ports; i++) { + temp = xhci_readl(xhci, xhci->usb3_ports[i]); + if ((temp & PORT_PLS_MASK) == USB_SS_PORT_LS_COMP_MOD) { + /* + * Compliance Mode Detected. Letting USB Core + * handle the Warm Reset + */ + xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n", + i + 1); + xhci_dbg(xhci, "Attempting Recovery routine!\n"); + hcd = xhci->shared_hcd; + + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + + usb_hcd_poll_rh_status(hcd); + } + } + + if (xhci->port_status_u0 != ((1 << xhci->num_usb3_ports)-1)) + mod_timer(&xhci->comp_mode_recovery_timer, + jiffies + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); +} + +/* + * Quirk to work around issue generated by the SN65LVPE502CP USB3.0 re-driver + * that causes ports behind that hardware to enter compliance mode sometimes. + * The quirk creates a timer that polls every 2 seconds the link state of + * each host controller's port and recovers it by issuing a Warm reset + * if Compliance mode is detected, otherwise the port will become "dead" (no + * device connections or disconnections will be detected anymore). Becasue no + * status event is generated when entering compliance mode (per xhci spec), + * this quirk is needed on systems that have the failing hardware installed. + */ +static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci) +{ + xhci->port_status_u0 = 0; + init_timer(&xhci->comp_mode_recovery_timer); + + xhci->comp_mode_recovery_timer.data = (unsigned long) xhci; + xhci->comp_mode_recovery_timer.function = compliance_mode_recovery; + xhci->comp_mode_recovery_timer.expires = jiffies + + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS); + + set_timer_slack(&xhci->comp_mode_recovery_timer, + msecs_to_jiffies(COMP_MODE_RCVRY_MSECS)); + add_timer(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n"); +} + +/* + * This function identifies the systems that have installed the SN65LVPE502CP + * USB3.0 re-driver and that need the Compliance Mode Quirk. + * Systems: + * Vendor: Hewlett-Packard -> System Models: Z420, Z620 and Z820 + */ +static bool compliance_mode_recovery_timer_quirk_check(void) +{ + const char *dmi_product_name, *dmi_sys_vendor; + + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + + if (!(strstr(dmi_sys_vendor, "Hewlett-Packard"))) + return false; + + if (strstr(dmi_product_name, "Z420") || + strstr(dmi_product_name, "Z620") || + strstr(dmi_product_name, "Z820")) + return true; + + return false; +} + +static int xhci_all_ports_seen_u0(struct xhci_hcd *xhci) +{ + return (xhci->port_status_u0 == ((1 << xhci->num_usb3_ports)-1)); +} + + /* * Initialize memory for HCD and xHC (one-time init). * @@ -421,6 +511,12 @@ int xhci_init(struct usb_hcd *hcd) retval = xhci_mem_init(xhci, GFP_KERNEL); xhci_dbg(xhci, "Finished xhci_init\n"); + /* Initializing Compliance Mode Recovery Data If Needed */ + if (compliance_mode_recovery_timer_quirk_check()) { + xhci->quirks |= XHCI_COMP_MODE_QUIRK; + compliance_mode_recovery_timer_init(xhci); + } + return retval; } @@ -629,6 +725,11 @@ void xhci_stop(struct usb_hcd *hcd) del_timer_sync(&xhci->event_ring_timer); #endif + /* Deleting Compliance Mode Recovery Timer */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) + del_timer_sync(&xhci->comp_mode_recovery_timer); + if (xhci->quirks & XHCI_AMD_PLL_FIX) usb_amd_dev_put(); @@ -806,6 +907,16 @@ int xhci_suspend(struct xhci_hcd *xhci) } spin_unlock_irq(&xhci->lock); + /* + * Deleting Compliance Mode Recovery Timer because the xHCI Host + * is about to be suspended. + */ + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + (!(xhci_all_ports_seen_u0(xhci)))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); + xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n"); + } + /* step 5: remove core well power */ /* synchronize irq when using MSI-X */ xhci_msix_sync_irqs(xhci); @@ -938,6 +1049,16 @@ int xhci_resume(struct xhci_hcd *xhci, bool hibernated) usb_hcd_resume_root_hub(hcd); usb_hcd_resume_root_hub(xhci->shared_hcd); } + + /* + * If system is subject to the Quirk, Compliance Mode Timer needs to + * be re-initialized Always after a system resume. Ports are subject + * to suffer the Compliance Mode issue again. It doesn't matter if + * ports have entered previously to U0 before system's suspension. + */ + if (xhci->quirks & XHCI_COMP_MODE_QUIRK) + compliance_mode_recovery_timer_init(xhci); + return retval; } #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index c713256..1a05908 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1495,6 +1495,7 @@ struct xhci_hcd { #define XHCI_LPM_SUPPORT (1 << 11) #define XHCI_INTEL_HOST (1 << 12) #define XHCI_SPURIOUS_REBOOT (1 << 13) +#define XHCI_COMP_MODE_QUIRK (1 << 14) unsigned int num_active_eps; unsigned int limit_active_eps; /* There are two roothubs to keep track of bus suspend info for */ @@ -1511,6 +1512,11 @@ struct xhci_hcd { unsigned sw_lpm_support:1; /* support xHCI 1.0 spec USB2 hardware LPM */ unsigned hw_lpm_support:1; + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; +/* Compliance Mode Timer Triggered every 2 seconds */ +#define COMP_MODE_RCVRY_MSECS 2000 }; /* convert between an HCD pointer and the corresponding EHCI_HCD */ -- cgit v0.10.2 From 319acdfc064169023cd9ada5085b434fbcdacec2 Mon Sep 17 00:00:00 2001 From: Ruchika Kharwar Date: Fri, 10 Aug 2012 09:58:30 +0300 Subject: usb: host: xhci-plat: use ioremap_nocache Use the ioremap_nocache variant of the ioremap API in order to make sure our memory will be marked uncachable. This patch should be backported to kernels as old as 3.4, that contain the commit 3429e91a661e1f383aecc86c6bbcf65afb15c892 "usb: host: xhci: add platform driver support". Signed-off-by: Ruchika Kharwar Signed-off-by: Felipe Balbi Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 689bc18..df90fe5 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -118,7 +118,7 @@ static int xhci_plat_probe(struct platform_device *pdev) goto put_hcd; } - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); + hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len); if (!hcd->regs) { dev_dbg(&pdev->dev, "error mapping memory\n"); ret = -EFAULT; -- cgit v0.10.2 From 296365781903226a3fb8758901eaeec09d2798e4 Mon Sep 17 00:00:00 2001 From: Moiz Sonasath Date: Wed, 5 Sep 2012 08:34:26 +0300 Subject: usb: host: xhci: fix compilation error for non-PCI based stacks For non PCI-based stacks, this function call usb_disable_xhci_ports(to_pci_dev(hcd->self.controller)); made from xhci_shutdown is not applicable. Ideally, we wouldn't have any PCI-specific code on a generic driver such as the xHCI stack, but it looks like we should just stub usb_disable_xhci_ports() out for non-PCI devices. [ balbi@ti.com: slight improvement to commit log ] This patch should be backported to kernels as old as 3.0, since the commit it fixes (e95829f474f0db3a4d940cae1423783edd966027 "xhci: Switch PPT ports to EHCI on shutdown.") was marked for stable. Signed-off-by: Moiz Sonasath Signed-off-by: Ruchika Kharwar Signed-off-by: Felipe Balbi Signed-off-by: Sarah Sharp Cc: stable@vger.kernel.org diff --git a/drivers/usb/host/pci-quirks.h b/drivers/usb/host/pci-quirks.h index ef004a5..7f69a39 100644 --- a/drivers/usb/host/pci-quirks.h +++ b/drivers/usb/host/pci-quirks.h @@ -15,6 +15,7 @@ void usb_disable_xhci_ports(struct pci_dev *xhci_pdev); static inline void usb_amd_quirk_pll_disable(void) {} static inline void usb_amd_quirk_pll_enable(void) {} static inline void usb_amd_dev_put(void) {} +static inline void usb_disable_xhci_ports(struct pci_dev *xhci_pdev) {} #endif /* CONFIG_PCI */ #endif /* __LINUX_USB_PCI_QUIRKS_H */ -- cgit v0.10.2 From 9ec1882df244c4ee1baa692676fef5e8b0f5487d Mon Sep 17 00:00:00 2001 From: Xinyu Chen Date: Mon, 27 Aug 2012 09:36:51 +0200 Subject: tty: serial: imx: console write routing is unsafe on SMP The console feature's write routing is unsafe on SMP with the startup/shutdown call. There could be several consumers of the console * the kernel printk * the init process using /dev/kmsg to call printk to show log * shell, which open /dev/console and write with sys_write() The shell goes into the normal uart open/write routing, but the other two go into the console operations. The open routing calls imx serial startup, which will write USR1/2 register without any lock and critical with imx_console_write call. Add a spin_lock for startup/shutdown/console_write routing. This patch is a port from Freescale's Android kernel. Signed-off-by: Xinyu Chen Tested-by: Dirk Behme CC: Sascha Hauer Acked-by: Shawn Guo Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index d5c689d6..908178f 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -754,6 +754,7 @@ static int imx_startup(struct uart_port *port) } } + spin_lock_irqsave(&sport->port.lock, flags); /* * Finally, clear and enable interrupts */ @@ -807,7 +808,6 @@ static int imx_startup(struct uart_port *port) /* * Enable modem status interrupts */ - spin_lock_irqsave(&sport->port.lock,flags); imx_enable_ms(&sport->port); spin_unlock_irqrestore(&sport->port.lock,flags); @@ -837,10 +837,13 @@ static void imx_shutdown(struct uart_port *port) { struct imx_port *sport = (struct imx_port *)port; unsigned long temp; + unsigned long flags; + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR2); temp &= ~(UCR2_TXEN); writel(temp, sport->port.membase + UCR2); + spin_unlock_irqrestore(&sport->port.lock, flags); if (USE_IRDA(sport)) { struct imxuart_platform_data *pdata; @@ -869,12 +872,14 @@ static void imx_shutdown(struct uart_port *port) * Disable all interrupts, port and break condition. */ + spin_lock_irqsave(&sport->port.lock, flags); temp = readl(sport->port.membase + UCR1); temp &= ~(UCR1_TXMPTYEN | UCR1_RRDYEN | UCR1_RTSDEN | UCR1_UARTEN); if (USE_IRDA(sport)) temp &= ~(UCR1_IREN); writel(temp, sport->port.membase + UCR1); + spin_unlock_irqrestore(&sport->port.lock, flags); } static void @@ -1217,6 +1222,9 @@ imx_console_write(struct console *co, const char *s, unsigned int count) struct imx_port *sport = imx_ports[co->index]; struct imx_port_ucrs old_ucr; unsigned int ucr1; + unsigned long flags; + + spin_lock_irqsave(&sport->port.lock, flags); /* * First, save UCR1/2/3 and then disable interrupts @@ -1242,6 +1250,8 @@ imx_console_write(struct console *co, const char *s, unsigned int count) while (!(readl(sport->port.membase + USR2) & USR2_TXDC)); imx_port_ucrs_restore(&sport->port, &old_ucr); + + spin_unlock_irqrestore(&sport->port.lock, flags); } /* -- cgit v0.10.2 From 7be0670f7b9198382938a03ff3db7f47ef6b4780 Mon Sep 17 00:00:00 2001 From: Dirk Behme Date: Fri, 31 Aug 2012 10:02:47 +0200 Subject: tty: serial: imx: don't reinit clock in imx_setup_ufcr() Remove the clock configuration from imx_setup_ufcr(). This isn't needed here and will cause garbage output if done. To be be sure that we only touch the bits we want (TXTL and RXTL) we have to mask out all other bits of the UFCR register. Add one non-existing bit macro for this, too (bit 6, DCEDTE on i.MX6). Signed-off-by: Dirk Behme CC: Shawn Guo CC: Sascha Hauer CC: Troy Kisky CC: Xinyu Chen Cc: stable Acked-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 908178f..e309e8b 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -132,6 +132,7 @@ #define UCR4_OREN (1<<1) /* Receiver overrun interrupt enable */ #define UCR4_DREN (1<<0) /* Recv data ready interrupt enable */ #define UFCR_RXTL_SHF 0 /* Receiver trigger level shift */ +#define UFCR_DCEDTE (1<<6) /* DCE/DTE mode select */ #define UFCR_RFDIV (7<<7) /* Reference freq divider mask */ #define UFCR_RFDIV_REG(x) (((x) < 7 ? 6 - (x) : 6) << 7) #define UFCR_TXTL_SHF 10 /* Transmitter trigger level shift */ @@ -667,22 +668,11 @@ static void imx_break_ctl(struct uart_port *port, int break_state) static int imx_setup_ufcr(struct imx_port *sport, unsigned int mode) { unsigned int val; - unsigned int ufcr_rfdiv; - - /* set receiver / transmitter trigger level. - * RFDIV is set such way to satisfy requested uartclk value - */ - val = TXTL << 10 | RXTL; - ufcr_rfdiv = (clk_get_rate(sport->clk_per) + sport->port.uartclk / 2) - / sport->port.uartclk; - - if(!ufcr_rfdiv) - ufcr_rfdiv = 1; - - val |= UFCR_RFDIV_REG(ufcr_rfdiv); + /* set receiver / transmitter trigger level */ + val = readl(sport->port.membase + UFCR) & (UFCR_RFDIV | UFCR_DCEDTE); + val |= TXTL << UFCR_TXTL_SHF | RXTL; writel(val, sport->port.membase + UFCR); - return 0; } -- cgit v0.10.2 From 804d74abe2e3f361ead5c5c6850d5b1ab0203862 Mon Sep 17 00:00:00 2001 From: Keith Packard Date: Mon, 9 Jul 2012 15:40:07 -0700 Subject: drm: use drm_compat_ioctl for 32-bit apps Most of the DRM drivers appear to be missing the .compat_ioctl file operation entry necessary for 32-bit application compatibility. This patch uses drm_compat_ioctl for all drivers which don't have their own, and which are using drm_ioctl for .unlocked_ioctl. This leaves drivers/gpu/drm/psb/psb_drv.c unchanged; it has a custom .unlocked_ioctl and will presumably need a custom .compat_ioctl as well. Signed-off-by: Keith Packard Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/ast/ast_drv.c b/drivers/gpu/drm/ast/ast_drv.c index d0c4574..3616480 100644 --- a/drivers/gpu/drm/ast/ast_drv.c +++ b/drivers/gpu/drm/ast/ast_drv.c @@ -193,6 +193,9 @@ static const struct file_operations ast_fops = { .mmap = ast_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .read = drm_read, }; diff --git a/drivers/gpu/drm/cirrus/cirrus_drv.c b/drivers/gpu/drm/cirrus/cirrus_drv.c index 7053140..b83a2d7 100644 --- a/drivers/gpu/drm/cirrus/cirrus_drv.c +++ b/drivers/gpu/drm/cirrus/cirrus_drv.c @@ -74,6 +74,9 @@ static const struct file_operations cirrus_driver_fops = { .unlocked_ioctl = drm_ioctl, .mmap = cirrus_mmap, .poll = drm_poll, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .fasync = drm_fasync, }; static struct drm_driver driver = { diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index ebacec6..6345abe 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -241,6 +241,9 @@ static const struct file_operations exynos_drm_driver_fops = { .poll = drm_poll, .read = drm_read, .unlocked_ioctl = drm_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .release = drm_release, }; diff --git a/drivers/gpu/drm/i810/i810_dma.c b/drivers/gpu/drm/i810/i810_dma.c index 57d892e..463ec68 100644 --- a/drivers/gpu/drm/i810/i810_dma.c +++ b/drivers/gpu/drm/i810/i810_dma.c @@ -115,6 +115,9 @@ static const struct file_operations i810_buffer_fops = { .unlocked_ioctl = drm_ioctl, .mmap = i810_mmap_buffers, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/i810/i810_drv.c b/drivers/gpu/drm/i810/i810_drv.c index f9924ad..48cfcca 100644 --- a/drivers/gpu/drm/i810/i810_drv.c +++ b/drivers/gpu/drm/i810/i810_drv.c @@ -51,6 +51,9 @@ static const struct file_operations i810_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/mgag200/mgag200_drv.c b/drivers/gpu/drm/mgag200/mgag200_drv.c index ea1024d..e5f145d 100644 --- a/drivers/gpu/drm/mgag200/mgag200_drv.c +++ b/drivers/gpu/drm/mgag200/mgag200_drv.c @@ -84,6 +84,9 @@ static const struct file_operations mgag200_driver_fops = { .mmap = mgag200_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .read = drm_read, }; diff --git a/drivers/gpu/drm/savage/savage_drv.c b/drivers/gpu/drm/savage/savage_drv.c index d31d4cc..c5a1643 100644 --- a/drivers/gpu/drm/savage/savage_drv.c +++ b/drivers/gpu/drm/savage/savage_drv.c @@ -43,6 +43,9 @@ static const struct file_operations savage_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/sis/sis_drv.c b/drivers/gpu/drm/sis/sis_drv.c index 7f11987..867dc03 100644 --- a/drivers/gpu/drm/sis/sis_drv.c +++ b/drivers/gpu/drm/sis/sis_drv.c @@ -74,6 +74,9 @@ static const struct file_operations sis_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/tdfx/tdfx_drv.c b/drivers/gpu/drm/tdfx/tdfx_drv.c index 90f6b13..a7f4d6b 100644 --- a/drivers/gpu/drm/tdfx/tdfx_drv.c +++ b/drivers/gpu/drm/tdfx/tdfx_drv.c @@ -49,6 +49,9 @@ static const struct file_operations tdfx_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/udl/udl_drv.c b/drivers/gpu/drm/udl/udl_drv.c index 6e52069..9f84128 100644 --- a/drivers/gpu/drm/udl/udl_drv.c +++ b/drivers/gpu/drm/udl/udl_drv.c @@ -66,6 +66,9 @@ static const struct file_operations udl_driver_fops = { .unlocked_ioctl = drm_ioctl, .release = drm_release, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; diff --git a/drivers/gpu/drm/via/via_drv.c b/drivers/gpu/drm/via/via_drv.c index e927b4c..af1b914 100644 --- a/drivers/gpu/drm/via/via_drv.c +++ b/drivers/gpu/drm/via/via_drv.c @@ -65,6 +65,9 @@ static const struct file_operations via_driver_fops = { .mmap = drm_mmap, .poll = drm_poll, .fasync = drm_fasync, +#ifdef CONFIG_COMPAT + .compat_ioctl = drm_compat_ioctl, +#endif .llseek = noop_llseek, }; -- cgit v0.10.2 From d013ef2aba8fe765ca683598e404203215632373 Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Wed, 5 Sep 2012 10:53:18 +0000 Subject: tcp: fix possible socket refcount problem for ipv6 commit 144d56e91044181ec0ef67aeca91e9a8b5718348 ("tcp: fix possible socket refcount problem") is missing the IPv6 part. As tcp_release_cb is shared by both protocols we should hold sock reference for the TCP_MTU_REDUCED_DEFERRED bit. Signed-off-by: Julian Anastasov Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index a3e60cc..acd32e3 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -403,8 +403,9 @@ static void tcp_v6_err(struct sk_buff *skb, struct inet6_skb_parm *opt, tp->mtu_info = ntohl(info); if (!sock_owned_by_user(sk)) tcp_v6_mtu_reduced(sk); - else - set_bit(TCP_MTU_REDUCED_DEFERRED, &tp->tsq_flags); + else if (!test_and_set_bit(TCP_MTU_REDUCED_DEFERRED, + &tp->tsq_flags)) + sock_hold(sk); goto out; } -- cgit v0.10.2 From d90c92fee89ccd75ef2646f3bde0b4c0450666c3 Mon Sep 17 00:00:00 2001 From: Santiago Leon Date: Tue, 4 Sep 2012 14:41:37 +0000 Subject: ibmveth: Fix alignment of rx queue bug This patch fixes a bug found by Nish Aravamudan (https://lkml.org/lkml/2012/5/15/220) where the driver is not following the spec (it is not aligning the rx buffer on a 16-byte boundary) and the hypervisor aborts the registration, making the device unusable. The fix follows BenH's recommendation (https://lkml.org/lkml/2012/7/20/461) to replace the kmalloc+map for a single call to dma_alloc_coherent() because that function always aligns to a 16-byte boundary. The stable trees will run into this bug whenever the rx buffer kmalloc call returns something not aligned on a 16-byte boundary. Cc: Signed-off-by: Santiago Leon Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/ibm/ibmveth.c b/drivers/net/ethernet/ibm/ibmveth.c index 9010cea..b68d28a 100644 --- a/drivers/net/ethernet/ibm/ibmveth.c +++ b/drivers/net/ethernet/ibm/ibmveth.c @@ -472,14 +472,9 @@ static void ibmveth_cleanup(struct ibmveth_adapter *adapter) } if (adapter->rx_queue.queue_addr != NULL) { - if (!dma_mapping_error(dev, adapter->rx_queue.queue_dma)) { - dma_unmap_single(dev, - adapter->rx_queue.queue_dma, - adapter->rx_queue.queue_len, - DMA_BIDIRECTIONAL); - adapter->rx_queue.queue_dma = DMA_ERROR_CODE; - } - kfree(adapter->rx_queue.queue_addr); + dma_free_coherent(dev, adapter->rx_queue.queue_len, + adapter->rx_queue.queue_addr, + adapter->rx_queue.queue_dma); adapter->rx_queue.queue_addr = NULL; } @@ -556,10 +551,13 @@ static int ibmveth_open(struct net_device *netdev) goto err_out; } + dev = &adapter->vdev->dev; + adapter->rx_queue.queue_len = sizeof(struct ibmveth_rx_q_entry) * rxq_entries; - adapter->rx_queue.queue_addr = kmalloc(adapter->rx_queue.queue_len, - GFP_KERNEL); + adapter->rx_queue.queue_addr = + dma_alloc_coherent(dev, adapter->rx_queue.queue_len, + &adapter->rx_queue.queue_dma, GFP_KERNEL); if (!adapter->rx_queue.queue_addr) { netdev_err(netdev, "unable to allocate rx queue pages\n"); @@ -567,19 +565,13 @@ static int ibmveth_open(struct net_device *netdev) goto err_out; } - dev = &adapter->vdev->dev; - adapter->buffer_list_dma = dma_map_single(dev, adapter->buffer_list_addr, 4096, DMA_BIDIRECTIONAL); adapter->filter_list_dma = dma_map_single(dev, adapter->filter_list_addr, 4096, DMA_BIDIRECTIONAL); - adapter->rx_queue.queue_dma = dma_map_single(dev, - adapter->rx_queue.queue_addr, - adapter->rx_queue.queue_len, DMA_BIDIRECTIONAL); if ((dma_mapping_error(dev, adapter->buffer_list_dma)) || - (dma_mapping_error(dev, adapter->filter_list_dma)) || - (dma_mapping_error(dev, adapter->rx_queue.queue_dma))) { + (dma_mapping_error(dev, adapter->filter_list_dma))) { netdev_err(netdev, "unable to map filter or buffer list " "pages\n"); rc = -ENOMEM; -- cgit v0.10.2 From 4758be37c01c658dec5c0ad08d456fa031493de4 Mon Sep 17 00:00:00 2001 From: Heather Lomond Date: Wed, 5 Sep 2012 05:02:10 -0400 Subject: ASoC: arizona: Fix typo in 44.1kHz rates Signed-off-by: Heather Lomond Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/arizona.c b/sound/soc/codecs/arizona.c index 5c9caca..1cf7a32 100644 --- a/sound/soc/codecs/arizona.c +++ b/sound/soc/codecs/arizona.c @@ -426,7 +426,7 @@ static const int arizona_44k1_bclk_rates[] = { 940800, 1411200, 1881600, - 2882400, + 2822400, 3763200, 5644800, 7526400, -- cgit v0.10.2 From 90beca5de591e12482a812f23a7f10690962ed4a Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 4 Sep 2012 23:12:33 -0700 Subject: workqueue: move WORKER_REBIND clearing in rebind_workers() to the end of the function This doesn't make any functional difference and is purely to help the next patch to be simpler. Signed-off-by: Tejun Heo Cc: Lai Jiangshan diff --git a/kernel/workqueue.c b/kernel/workqueue.c index c462cd6..d79a18d 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1422,19 +1422,7 @@ retry: goto retry; } - /* - * All idle workers are rebound and waiting for %WORKER_REBIND to - * be cleared inside idle_worker_rebind(). Clear and release. - * Clearing %WORKER_REBIND from this foreign context is safe - * because these workers are still guaranteed to be idle. - */ - for_each_worker_pool(pool, gcwq) - list_for_each_entry(worker, &pool->idle_list, entry) - worker->flags &= ~WORKER_REBIND; - - wake_up_all(&gcwq->rebind_hold); - - /* rebind busy workers */ + /* all idle workers are rebound, rebind busy workers */ for_each_busy_worker(worker, i, pos, gcwq) { struct work_struct *rebind_work = &worker->rebind_work; unsigned long worker_flags = worker->flags; @@ -1454,6 +1442,18 @@ retry: worker->scheduled.next, work_color_to_flags(WORK_NO_COLOR)); } + + /* + * All idle workers are rebound and waiting for %WORKER_REBIND to + * be cleared inside idle_worker_rebind(). Clear and release. + * Clearing %WORKER_REBIND from this foreign context is safe + * because these workers are still guaranteed to be idle. + */ + for_each_worker_pool(pool, gcwq) + list_for_each_entry(worker, &pool->idle_list, entry) + worker->flags &= ~WORKER_REBIND; + + wake_up_all(&gcwq->rebind_hold); } static struct worker *alloc_worker(void) -- cgit v0.10.2 From ec58815ab0409a921a7c9744eb4ca44866b14d71 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 4 Sep 2012 23:16:32 -0700 Subject: workqueue: fix possible deadlock in idle worker rebinding Currently, rebind_workers() and idle_worker_rebind() are two-way interlocked. rebind_workers() waits for idle workers to finish rebinding and rebound idle workers wait for rebind_workers() to finish rebinding busy workers before proceeding. Unfortunately, this isn't enough. The second wait from idle workers is implemented as follows. wait_event(gcwq->rebind_hold, !(worker->flags & WORKER_REBIND)); rebind_workers() clears WORKER_REBIND, wakes up the idle workers and then returns. If CPU hotplug cycle happens again before one of the idle workers finishes the above wait_event(), rebind_workers() will repeat the first part of the handshake - set WORKER_REBIND again and wait for the idle worker to finish rebinding - and this leads to deadlock because the idle worker would be waiting for WORKER_REBIND to clear. This is fixed by adding another interlocking step at the end - rebind_workers() now waits for all the idle workers to finish the above WORKER_REBIND wait before returning. This ensures that all rebinding steps are complete on all idle workers before the next hotplug cycle can happen. This problem was diagnosed by Lai Jiangshan who also posted a patch to fix the issue, upon which this patch is based. This is the minimal fix and further patches are scheduled for the next merge window to simplify the CPU hotplug path. Signed-off-by: Tejun Heo Original-patch-by: Lai Jiangshan LKML-Reference: <1346516916-1991-3-git-send-email-laijs@cn.fujitsu.com> diff --git a/kernel/workqueue.c b/kernel/workqueue.c index d79a18d..dc7b845 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1326,6 +1326,15 @@ static void idle_worker_rebind(struct worker *worker) /* we did our part, wait for rebind_workers() to finish up */ wait_event(gcwq->rebind_hold, !(worker->flags & WORKER_REBIND)); + + /* + * rebind_workers() shouldn't finish until all workers passed the + * above WORKER_REBIND wait. Tell it when done. + */ + spin_lock_irq(&worker->pool->gcwq->lock); + if (!--worker->idle_rebind->cnt) + complete(&worker->idle_rebind->done); + spin_unlock_irq(&worker->pool->gcwq->lock); } /* @@ -1448,12 +1457,28 @@ retry: * be cleared inside idle_worker_rebind(). Clear and release. * Clearing %WORKER_REBIND from this foreign context is safe * because these workers are still guaranteed to be idle. + * + * We need to make sure all idle workers passed WORKER_REBIND wait + * in idle_worker_rebind() before returning; otherwise, workers can + * get stuck at the wait if hotplug cycle repeats. */ - for_each_worker_pool(pool, gcwq) - list_for_each_entry(worker, &pool->idle_list, entry) + idle_rebind.cnt = 1; + INIT_COMPLETION(idle_rebind.done); + + for_each_worker_pool(pool, gcwq) { + list_for_each_entry(worker, &pool->idle_list, entry) { worker->flags &= ~WORKER_REBIND; + idle_rebind.cnt++; + } + } wake_up_all(&gcwq->rebind_hold); + + if (--idle_rebind.cnt) { + spin_unlock_irq(&gcwq->lock); + wait_for_completion(&idle_rebind.done); + spin_lock_irq(&gcwq->lock); + } } static struct worker *alloc_worker(void) -- cgit v0.10.2 From dafc4f7be1a556ca3868d343c00127728b397068 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=89ric=20Piel?= Date: Tue, 4 Sep 2012 17:25:06 +0200 Subject: USB: ftdi-sio: add support for more Physik Instrumente devices MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit b69cc672052540 added support for the E-861. After acquiring a C-867, I realised that every Physik Instrumente's device has a different PID. They are listed in the Windows device driver's .inf file. So here are all PIDs for the current (and probably future) USB devices from Physik Instrumente. Compiled, but only actually tested on the E-861 and C-867. Signed-off-by: Éric Piel Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5620db6..1197d47 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -810,7 +810,24 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) }, { USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) }, + { USB_DEVICE(FTDI_VID, PI_C865_PID) }, + { USB_DEVICE(FTDI_VID, PI_C857_PID) }, + { USB_DEVICE(PI_VID, PI_C866_PID) }, + { USB_DEVICE(PI_VID, PI_C663_PID) }, + { USB_DEVICE(PI_VID, PI_C725_PID) }, + { USB_DEVICE(PI_VID, PI_E517_PID) }, + { USB_DEVICE(PI_VID, PI_C863_PID) }, { USB_DEVICE(PI_VID, PI_E861_PID) }, + { USB_DEVICE(PI_VID, PI_C867_PID) }, + { USB_DEVICE(PI_VID, PI_E609_PID) }, + { USB_DEVICE(PI_VID, PI_E709_PID) }, + { USB_DEVICE(PI_VID, PI_100F_PID) }, + { USB_DEVICE(PI_VID, PI_1011_PID) }, + { USB_DEVICE(PI_VID, PI_1012_PID) }, + { USB_DEVICE(PI_VID, PI_1013_PID) }, + { USB_DEVICE(PI_VID, PI_1014_PID) }, + { USB_DEVICE(PI_VID, PI_1015_PID) }, + { USB_DEVICE(PI_VID, PI_1016_PID) }, { USB_DEVICE(KONDO_VID, KONDO_USB_SERIAL_PID) }, { USB_DEVICE(BAYER_VID, BAYER_CONTOUR_CABLE_PID) }, { USB_DEVICE(FTDI_VID, MARVELL_OPENRD_PID), diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 5dd96ca..080d158 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -791,8 +791,27 @@ * Physik Instrumente * http://www.physikinstrumente.com/en/products/ */ +/* These two devices use the VID of FTDI */ +#define PI_C865_PID 0xe0a0 /* PI C-865 Piezomotor Controller */ +#define PI_C857_PID 0xe0a1 /* PI Encoder Trigger Box */ + #define PI_VID 0x1a72 /* Vendor ID */ -#define PI_E861_PID 0x1008 /* E-861 piezo controller USB connection */ +#define PI_C866_PID 0x1000 /* PI C-866 Piezomotor Controller */ +#define PI_C663_PID 0x1001 /* PI C-663 Mercury-Step */ +#define PI_C725_PID 0x1002 /* PI C-725 Piezomotor Controller */ +#define PI_E517_PID 0x1005 /* PI E-517 Digital Piezo Controller Operation Module */ +#define PI_C863_PID 0x1007 /* PI C-863 */ +#define PI_E861_PID 0x1008 /* PI E-861 Piezomotor Controller */ +#define PI_C867_PID 0x1009 /* PI C-867 Piezomotor Controller */ +#define PI_E609_PID 0x100D /* PI E-609 Digital Piezo Controller */ +#define PI_E709_PID 0x100E /* PI E-709 Digital Piezo Controller */ +#define PI_100F_PID 0x100F /* PI Digital Piezo Controller */ +#define PI_1011_PID 0x1011 /* PI Digital Piezo Controller */ +#define PI_1012_PID 0x1012 /* PI Motion Controller */ +#define PI_1013_PID 0x1013 /* PI Motion Controller */ +#define PI_1014_PID 0x1014 /* PI Device */ +#define PI_1015_PID 0x1015 /* PI Device */ +#define PI_1016_PID 0x1016 /* PI Digital Servo Module */ /* * Kondo Kagaku Co.Ltd. -- cgit v0.10.2 From 26a538b9ea2a3ee10dafc0068f0560dfd7b7ba37 Mon Sep 17 00:00:00 2001 From: Horst Schirmeier Date: Fri, 31 Aug 2012 00:00:28 +0200 Subject: USB: ftdi_sio: PID for NZR SEM 16+ USB This adds the USB PID for the NZR SEM 16+ USB energy monitor device . It works perfectly with the GPL software on . Signed-off-by: Horst Schirmeier Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1197d47..e2fa788 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -704,6 +704,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_PCDJ_DAC2_PID) }, { USB_DEVICE(FTDI_VID, FTDI_RRCIRKITS_LOCOBUFFER_PID) }, { USB_DEVICE(FTDI_VID, FTDI_ASK_RDR400_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NZR_SEM_USB_PID) }, { USB_DEVICE(ICOM_VID, ICOM_ID_1_PID) }, { USB_DEVICE(ICOM_VID, ICOM_OPC_U_UC_PID) }, { USB_DEVICE(ICOM_VID, ICOM_ID_RP2C1_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 080d158..9bcaf9c 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -75,6 +75,9 @@ #define FTDI_OPENDCC_GATEWAY_PID 0xBFDB #define FTDI_OPENDCC_GBM_PID 0xBFDC +/* NZR SEM 16+ USB (http://www.nzr.de) */ +#define FTDI_NZR_SEM_USB_PID 0xC1E0 /* NZR SEM-LOG16+ */ + /* * RR-CirKits LocoBuffer USB (http://www.rr-cirkits.com) */ -- cgit v0.10.2 From 6fffb77c8393151b0cf8cef1b9c2ba90587dd2e8 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Wed, 29 Aug 2012 11:49:18 +0200 Subject: USB: ohci-at91: fix PIO handling in relation with number of ports If the number of ports present on the SoC/board is not the maximum and that the platform data is not filled with all data, there is an easy way to mess the PIO setup for this interface. This quick fix addresses mis-configuration in USB host platform data that is common in at91 boards since commit 0ee6d1e (USB: ohci-at91: change maximum number of ports) that did not modified the associatd board files. Reported-by: Klaus Falkner Signed-off-by: Nicolas Ferre Cc: Stable [3.4+] Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index a665b3e..aaa8d2b 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -570,6 +570,16 @@ static int __devinit ohci_hcd_at91_drv_probe(struct platform_device *pdev) if (pdata) { at91_for_each_port(i) { + /* + * do not configure PIO if not in relation with + * real USB port on board + */ + if (i >= pdata->ports) { + pdata->vbus_pin[i] = -EINVAL; + pdata->overcurrent_pin[i] = -EINVAL; + break; + } + if (!gpio_is_valid(pdata->vbus_pin[i])) continue; gpio = pdata->vbus_pin[i]; -- cgit v0.10.2 From 92fc7a8b0f20bdb243c706daf42658e8e0cd2ef0 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 4 Sep 2012 10:41:02 -0400 Subject: USB: add device quirk for Joss Optical touchboard This patch (as1604) adds a CONFIG_INTF_STRINGS quirk for the Joss infrared touchboard device. The device doesn't like to be asked for its interface strings. Signed-off-by: Alan Stern Reported-by: adam ? Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f15501f4c..e77a8e8 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -71,6 +71,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04b4, 0x0526), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Microchip Joss Optical infrared touchboard device */ + { USB_DEVICE(0x04d8, 0x000c), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Samsung Android phone modem - ID conflict with SPH-I500 */ { USB_DEVICE(0x04e8, 0x6601), .driver_info = USB_QUIRK_CONFIG_INTF_STRINGS }, -- cgit v0.10.2 From 37f45cc54cb03cac4a6b865b32bc705bb0cb1d29 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 3 Sep 2012 13:04:13 -0300 Subject: ASoC: mc13783: Remove mono support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Playing a mono track on a mc13783 codec results in incorrect playback rate. Remove mono support so that a mono track can be played correctly. Signed-off-by: Fabio Estevam Tested-by: Gaëtan Carlier Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/mc13783.c b/sound/soc/codecs/mc13783.c index 8f726c0..115a403 100644 --- a/sound/soc/codecs/mc13783.c +++ b/sound/soc/codecs/mc13783.c @@ -659,7 +659,7 @@ static struct snd_soc_dai_driver mc13783_dai_async[] = { .id = MC13783_ID_STEREO_DAC, .playback = { .stream_name = "Playback", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = MC13783_FORMATS, @@ -670,7 +670,7 @@ static struct snd_soc_dai_driver mc13783_dai_async[] = { .id = MC13783_ID_STEREO_CODEC, .capture = { .stream_name = "Capture", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = MC13783_RATES_RECORD, .formats = MC13783_FORMATS, @@ -692,14 +692,14 @@ static struct snd_soc_dai_driver mc13783_dai_sync[] = { .id = MC13783_ID_SYNC, .playback = { .stream_name = "Playback", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = SNDRV_PCM_RATE_8000_96000, .formats = MC13783_FORMATS, }, .capture = { .stream_name = "Capture", - .channels_min = 1, + .channels_min = 2, .channels_max = 2, .rates = MC13783_RATES_RECORD, .formats = MC13783_FORMATS, -- cgit v0.10.2 From 6138ed2ab8791d7a9c5ba66cadadd5eaf1fc1dac Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 5 Sep 2012 17:09:13 +0200 Subject: target: move transport_get_sense_data We will be calling it from transport_complete_cmd, avoid forward declarations. No semantic change. Signed-off-by: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 3425098..d0afdaa 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -567,6 +567,61 @@ static void target_complete_failure_work(struct work_struct *work) transport_generic_request_failure(cmd); } +/* + * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd + */ +static int transport_get_sense_data(struct se_cmd *cmd) +{ + unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; + struct se_device *dev = cmd->se_dev; + unsigned long flags; + u32 offset = 0; + + WARN_ON(!cmd->se_lun); + + if (!dev) + return 0; + + spin_lock_irqsave(&cmd->t_state_lock, flags); + if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { + spin_unlock_irqrestore(&cmd->t_state_lock, flags); + return 0; + } + + if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)) + goto out; + + if (!dev->transport->get_sense_buffer) { + pr_err("dev->transport->get_sense_buffer is NULL\n"); + goto out; + } + + sense_buffer = dev->transport->get_sense_buffer(cmd); + if (!sense_buffer) { + pr_err("ITT 0x%08x cmd %p: Unable to locate" + " sense buffer for task with sense\n", + cmd->se_tfo->get_task_tag(cmd), cmd); + goto out; + } + + spin_unlock_irqrestore(&cmd->t_state_lock, flags); + + offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); + + memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER); + + /* Automatically padded */ + cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; + + pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", + dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); + return 0; + +out: + spin_unlock_irqrestore(&cmd->t_state_lock, flags); + return -1; +} + void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) { struct se_device *dev = cmd->se_dev; @@ -1821,61 +1876,6 @@ execute: EXPORT_SYMBOL(target_execute_cmd); /* - * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd - */ -static int transport_get_sense_data(struct se_cmd *cmd) -{ - unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; - struct se_device *dev = cmd->se_dev; - unsigned long flags; - u32 offset = 0; - - WARN_ON(!cmd->se_lun); - - if (!dev) - return 0; - - spin_lock_irqsave(&cmd->t_state_lock, flags); - if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return 0; - } - - if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)) - goto out; - - if (!dev->transport->get_sense_buffer) { - pr_err("dev->transport->get_sense_buffer is NULL\n"); - goto out; - } - - sense_buffer = dev->transport->get_sense_buffer(cmd); - if (!sense_buffer) { - pr_err("ITT 0x%08x cmd %p: Unable to locate" - " sense buffer for task with sense\n", - cmd->se_tfo->get_task_tag(cmd), cmd); - goto out; - } - - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - - offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); - - memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER); - - /* Automatically padded */ - cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; - - pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", - dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); - return 0; - -out: - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return -1; -} - -/* * Process all commands up to the last received ORDERED task attribute which * requires another blocking boundary */ -- cgit v0.10.2 From 27a2709912ac19c755d34c79fe11994b0bf8082b Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 5 Sep 2012 17:09:14 +0200 Subject: target: simplify code around transport_get_sense_data The error conditions in transport_get_sense_data are superfluous and complicate the code unnecessarily: * SCF_TRANSPORT_TASK_SENSE is checked in the caller; * it's simply part of the invariants of dev->transport->get_sense_buffer that it must be there if transport_complete ever returns 1, and that it must not return NULL. Besides, the entire callback will disappear with the next patch. * similarly in the caller we can expect that sense data is only sent for non-zero cmd->scsi_status. Signed-off-by: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index d0afdaa..040f05f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -570,7 +570,7 @@ static void target_complete_failure_work(struct work_struct *work) /* * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd */ -static int transport_get_sense_data(struct se_cmd *cmd) +static void transport_get_sense_data(struct se_cmd *cmd) { unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; struct se_device *dev = cmd->se_dev; @@ -580,30 +580,15 @@ static int transport_get_sense_data(struct se_cmd *cmd) WARN_ON(!cmd->se_lun); if (!dev) - return 0; + return; spin_lock_irqsave(&cmd->t_state_lock, flags); if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return 0; - } - - if (!(cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE)) - goto out; - - if (!dev->transport->get_sense_buffer) { - pr_err("dev->transport->get_sense_buffer is NULL\n"); - goto out; + return; } sense_buffer = dev->transport->get_sense_buffer(cmd); - if (!sense_buffer) { - pr_err("ITT 0x%08x cmd %p: Unable to locate" - " sense buffer for task with sense\n", - cmd->se_tfo->get_task_tag(cmd), cmd); - goto out; - } - spin_unlock_irqrestore(&cmd->t_state_lock, flags); offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); @@ -615,11 +600,6 @@ static int transport_get_sense_data(struct se_cmd *cmd) pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); - return 0; - -out: - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return -1; } void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) @@ -1990,7 +1970,7 @@ static void transport_handle_queue_full( static void target_complete_ok_work(struct work_struct *work) { struct se_cmd *cmd = container_of(work, struct se_cmd, work); - int reason = 0, ret; + int ret; /* * Check if we need to move delayed/dormant tasks from cmds on the @@ -2011,19 +1991,16 @@ static void target_complete_ok_work(struct work_struct *work) * the struct se_cmd in question. */ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) { - if (transport_get_sense_data(cmd) < 0) - reason = TCM_NON_EXISTENT_LUN; - - if (cmd->scsi_status) { - ret = transport_send_check_condition_and_sense( - cmd, reason, 1); - if (ret == -EAGAIN || ret == -ENOMEM) - goto queue_full; + WARN_ON(!cmd->scsi_status); + transport_get_sense_data(cmd); + ret = transport_send_check_condition_and_sense( + cmd, 0, 1); + if (ret == -EAGAIN || ret == -ENOMEM) + goto queue_full; - transport_lun_remove_cmd(cmd); - transport_cmd_check_stop_to_fabric(cmd); - return; - } + transport_lun_remove_cmd(cmd); + transport_cmd_check_stop_to_fabric(cmd); + return; } /* * Check for a callback, used by amongst other things -- cgit v0.10.2 From d5829eac5f7cfff89c6d1cf11717eee97cf030d0 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Wed, 5 Sep 2012 17:09:15 +0200 Subject: target: fix use-after-free with PSCSI sense data The pointer to the sense buffer is fetched by transport_get_sense_data, but this is called by target_complete_ok_work long after pscsi_req_done has freed the struct that contains it. Pass instead the fabric's sense buffer to transport_complete, and copy the data to it directly in transport_complete. Setting SCF_TRANSPORT_TASK_SENSE also becomes a duty of transport_complete. Signed-off-by: Paolo Bonzini Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 5552fa7..5f7151d 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -667,7 +667,8 @@ static void pscsi_free_device(void *p) kfree(pdv); } -static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) +static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg, + unsigned char *sense_buffer) { struct pscsi_dev_virt *pdv = cmd->se_dev->dev_ptr; struct scsi_device *sd = pdv->pdv_sd; @@ -679,7 +680,7 @@ static int pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg) * not been allocated because TCM is handling the emulation directly. */ if (!pt) - return 0; + return; cdb = &pt->pscsi_cdb[0]; result = pt->pscsi_result; @@ -750,10 +751,10 @@ after_mode_sense: } after_mode_select: - if (status_byte(result) & CHECK_CONDITION) - return 1; - - return 0; + if (sense_buffer && (status_byte(result) & CHECK_CONDITION)) { + memcpy(sense_buffer, pt->pscsi_sense, TRANSPORT_SENSE_BUFFER); + cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE; + } } enum { @@ -1184,13 +1185,6 @@ fail: return -ENOMEM; } -static unsigned char *pscsi_get_sense_buffer(struct se_cmd *cmd) -{ - struct pscsi_plugin_task *pt = cmd->priv; - - return pt->pscsi_sense; -} - /* pscsi_get_device_rev(): * * @@ -1273,7 +1267,6 @@ static struct se_subsystem_api pscsi_template = { .check_configfs_dev_params = pscsi_check_configfs_dev_params, .set_configfs_dev_params = pscsi_set_configfs_dev_params, .show_configfs_dev_params = pscsi_show_configfs_dev_params, - .get_sense_buffer = pscsi_get_sense_buffer, .get_device_rev = pscsi_get_device_rev, .get_device_type = pscsi_get_device_type, .get_blocks = pscsi_get_blocks, diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 040f05f..8a29e3f 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -568,38 +568,31 @@ static void target_complete_failure_work(struct work_struct *work) } /* - * Used to obtain Sense Data from underlying Linux/SCSI struct scsi_cmnd + * Used when asking transport to copy Sense Data from the underlying + * Linux/SCSI struct scsi_cmnd */ -static void transport_get_sense_data(struct se_cmd *cmd) +static unsigned char *transport_get_sense_buffer(struct se_cmd *cmd) { - unsigned char *buffer = cmd->sense_buffer, *sense_buffer = NULL; + unsigned char *buffer = cmd->sense_buffer; struct se_device *dev = cmd->se_dev; - unsigned long flags; u32 offset = 0; WARN_ON(!cmd->se_lun); if (!dev) - return; - - spin_lock_irqsave(&cmd->t_state_lock, flags); - if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { - spin_unlock_irqrestore(&cmd->t_state_lock, flags); - return; - } + return NULL; - sense_buffer = dev->transport->get_sense_buffer(cmd); - spin_unlock_irqrestore(&cmd->t_state_lock, flags); + if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) + return NULL; offset = cmd->se_tfo->set_fabric_sense_len(cmd, TRANSPORT_SENSE_BUFFER); - memcpy(&buffer[offset], sense_buffer, TRANSPORT_SENSE_BUFFER); - /* Automatically padded */ cmd->scsi_sense_length = TRANSPORT_SENSE_BUFFER + offset; - pr_debug("HBA_[%u]_PLUG[%s]: Set SAM STATUS: 0x%02x and sense\n", + pr_debug("HBA_[%u]_PLUG[%s]: Requesting sense for SAM STATUS: 0x%02x\n", dev->se_hba->hba_id, dev->transport->name, cmd->scsi_status); + return &buffer[offset]; } void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) @@ -615,11 +608,11 @@ void target_complete_cmd(struct se_cmd *cmd, u8 scsi_status) cmd->transport_state &= ~CMD_T_BUSY; if (dev && dev->transport->transport_complete) { - if (dev->transport->transport_complete(cmd, - cmd->t_data_sg) != 0) { - cmd->se_cmd_flags |= SCF_TRANSPORT_TASK_SENSE; + dev->transport->transport_complete(cmd, + cmd->t_data_sg, + transport_get_sense_buffer(cmd)); + if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) success = 1; - } } /* @@ -1987,12 +1980,11 @@ static void target_complete_ok_work(struct work_struct *work) schedule_work(&cmd->se_dev->qf_work_queue); /* - * Check if we need to retrieve a sense buffer from + * Check if we need to send a sense buffer from * the struct se_cmd in question. */ if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) { WARN_ON(!cmd->scsi_status); - transport_get_sense_data(cmd); ret = transport_send_check_condition_and_sense( cmd, 0, 1); if (ret == -EAGAIN || ret == -ENOMEM) diff --git a/include/target/target_core_backend.h b/include/target/target_core_backend.h index f1405d33..941c84bf 100644 --- a/include/target/target_core_backend.h +++ b/include/target/target_core_backend.h @@ -23,7 +23,9 @@ struct se_subsystem_api { struct se_device *(*create_virtdevice)(struct se_hba *, struct se_subsystem_dev *, void *); void (*free_device)(void *); - int (*transport_complete)(struct se_cmd *cmd, struct scatterlist *); + void (*transport_complete)(struct se_cmd *cmd, + struct scatterlist *, + unsigned char *); int (*parse_cdb)(struct se_cmd *cmd); ssize_t (*check_configfs_dev_params)(struct se_hba *, -- cgit v0.10.2 From ab548d2dba63ba947287965e525cc02a15d9853d Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 6 Sep 2012 10:10:11 +0200 Subject: ALSA: hda - Fix missing Master volume for STAC9200/925x With the commit [2faa3bf: ALSA: hda - Rewrite the mute-LED hook with vmaster hook in patch_sigmatel.c], the former Master volume control was converted to PCM. This was supposed to be covered by the vmaster control. But due to the lack of "PCM" slave definition, this didn't happen properly. The patch fixes the missing entry. Reported-by: Andrew Shadura Cc: [v3.4+] Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 6f806d3..3d4722f 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -1075,7 +1075,7 @@ static struct snd_kcontrol_new stac_smux_mixer = { static const char * const slave_pfxs[] = { "Front", "Surround", "Center", "LFE", "Side", - "Headphone", "Speaker", "IEC958", + "Headphone", "Speaker", "IEC958", "PCM", NULL }; -- cgit v0.10.2 From 9016083b7bc4829c4f97f37a1a3102e0f5a37692 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Wed, 5 Sep 2012 14:07:59 +0200 Subject: s390/hugetlb: use direct TLB flushing for hugetlbfs pages huge_ptep_get_and_clear() is either missing a TLB invalidation or an mm->context.attach_count check. Since the attach_count logic was introduced with normal ptes in mind, let's just use direct TLB flushing for hugetlbfs pages. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/include/asm/hugetlb.h b/arch/s390/include/asm/hugetlb.h index 799ed0f..2d6e6e3 100644 --- a/arch/s390/include/asm/hugetlb.h +++ b/arch/s390/include/asm/hugetlb.h @@ -66,16 +66,6 @@ static inline pte_t huge_ptep_get(pte_t *ptep) return pte; } -static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, - unsigned long addr, pte_t *ptep) -{ - pte_t pte = huge_ptep_get(ptep); - - mm->context.flush_mm = 1; - pmd_clear((pmd_t *) ptep); - return pte; -} - static inline void __pmd_csp(pmd_t *pmdp) { register unsigned long reg2 asm("2") = pmd_val(*pmdp); @@ -117,6 +107,15 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, __pmd_csp(pmdp); } +static inline pte_t huge_ptep_get_and_clear(struct mm_struct *mm, + unsigned long addr, pte_t *ptep) +{ + pte_t pte = huge_ptep_get(ptep); + + huge_ptep_invalidate(mm, addr, ptep); + return pte; +} + #define huge_ptep_set_access_flags(__vma, __addr, __ptep, __entry, __dirty) \ ({ \ int __changed = !pte_same(huge_ptep_get(__ptep), __entry); \ @@ -131,10 +130,7 @@ static inline void huge_ptep_invalidate(struct mm_struct *mm, ({ \ pte_t __pte = huge_ptep_get(__ptep); \ if (pte_write(__pte)) { \ - (__mm)->context.flush_mm = 1; \ - if (atomic_read(&(__mm)->context.attach_count) > 1 || \ - (__mm) != current->active_mm) \ - huge_ptep_invalidate(__mm, __addr, __ptep); \ + huge_ptep_invalidate(__mm, __addr, __ptep); \ set_huge_pte_at(__mm, __addr, __ptep, \ huge_pte_wrprotect(__pte)); \ } \ -- cgit v0.10.2 From 1f08be80bef6f7a3faaa728db836b47ff742f41f Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 5 Sep 2012 14:18:22 +0200 Subject: s390/dasd: move wake_up call Ensure that all work is done when the process waiting for a dasd state change is woken up. With this change it is save to assume that after a userspace triggered state change and a udev settle invocation there are no unexpected users of a dasd device. Acked-by: Stefan Weinhuber Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 15370a2..6498d15 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -534,11 +534,11 @@ static void dasd_change_state(struct dasd_device *device) if (rc) device->target = device->state; - if (device->state == device->target) - wake_up(&dasd_init_waitq); - /* let user-space know that the device status changed */ kobject_uevent(&device->cdev->dev.kobj, KOBJ_CHANGE); + + if (device->state == device->target) + wake_up(&dasd_init_waitq); } /* -- cgit v0.10.2 From 43d0be75af8d05654b88d1da494cf292714fbdec Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 5 Sep 2012 14:19:42 +0200 Subject: s390/cio: fix IO subchannel event race If the subchannel event function is called from IRQ context and we observe that the subchannel in question is gone we flag the attached device as not operational and schedule the event function to be called again from process context where the subchannel gets deregistered. However if the subchannel reappeared at the time the event function gets called from process context we would do nothing and leave the device in not operational state. Recognize this case in sch_get_action and trigger reexamination of the subchannel/device. Acked-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index ed25c87..e8e1a10 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1426,6 +1426,8 @@ static enum io_sch_action sch_get_action(struct subchannel *sch) return IO_SCH_REPROBE; if (cdev->online) return IO_SCH_VERIFY; + if (cdev->private->state == DEV_STATE_NOT_OPER) + return IO_SCH_UNREG_ATTACH; return IO_SCH_NOP; } -- cgit v0.10.2 From 3368ba25bf387109b24732c1e270c628f20e345d Mon Sep 17 00:00:00 2001 From: Sebastian Ott Date: Wed, 5 Sep 2012 14:20:41 +0200 Subject: s390/cio: invalidate cdev pointer before deregistration Make sure that the cdev pointer for IO subchannels is set to NULL when we deregister the device (and release its last reference). This will fix a bug were another process operates on an already freed ccw device. Acked-by: Peter Oberparleiter Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c index e8e1a10..fc916f5 100644 --- a/drivers/s390/cio/device.c +++ b/drivers/s390/cio/device.c @@ -1521,11 +1521,14 @@ static int io_subchannel_sch_event(struct subchannel *sch, int process) goto out; break; case IO_SCH_UNREG_ATTACH: + spin_lock_irqsave(sch->lock, flags); if (cdev->private->flags.resuming) { /* Device will be handled later. */ rc = 0; - goto out; + goto out_unlock; } + sch_set_cdev(sch, NULL); + spin_unlock_irqrestore(sch->lock, flags); /* Unregister ccw device. */ ccw_device_unregister(cdev); break; -- cgit v0.10.2 From 57b2d68863f281737d8596cb3d76d89d9cc54fd8 Mon Sep 17 00:00:00 2001 From: Dylan Reid Date: Sat, 1 Sep 2012 01:38:19 -0700 Subject: ASoC: samsung dma - Don't indicate support for pause/resume. The pause and resume operations indicate that the stream can be un-paused/resumed from the exact location they were paused/suspended. This is not true for this driver, the pause and suspend triggers share the same code path with stop, they flush all pending DMA transfers. This drops all pending samples. The pause_release/resume triggers are the same as start, except that prepare won't be called beforehand, nothing will be enqueued to the DMA engine and nothing will happen (no audio). Removing the pause flag will let apps know that it isn't supported. Removing the resume flag will cause user space to call prepare and start instead of resume, so audio will continue playing when the system wakes up. Before removing the pause and resume flags, I tested this on an exynos 5250, using 'aplay -i'. Pause/un-pause leads to silence followed by a write error. Suspend/resume testing led to the same result. Removing the two flags fixes suspend/resume (since snd_pcm_prepare is called again). And leads to a proper reporting of pause not supported. Signed-off-by: Dylan Reid Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c index f3ebc38..b70964e 100644 --- a/sound/soc/samsung/dma.c +++ b/sound/soc/samsung/dma.c @@ -34,9 +34,7 @@ static const struct snd_pcm_hardware dma_hardware = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | SNDRV_PCM_INFO_MMAP | - SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_PAUSE | - SNDRV_PCM_INFO_RESUME, + SNDRV_PCM_INFO_MMAP_VALID, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_U16_LE | SNDRV_PCM_FMTBIT_U8 | @@ -248,15 +246,11 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd) switch (cmd) { case SNDRV_PCM_TRIGGER_START: - case SNDRV_PCM_TRIGGER_RESUME: - case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: prtd->state |= ST_RUNNING; prtd->params->ops->trigger(prtd->params->ch); break; case SNDRV_PCM_TRIGGER_STOP: - case SNDRV_PCM_TRIGGER_SUSPEND: - case SNDRV_PCM_TRIGGER_PAUSE_PUSH: prtd->state &= ~ST_RUNNING; prtd->params->ops->stop(prtd->params->ch); break; -- cgit v0.10.2 From 0626af3139572610b56376580d11eb65d45d9dd7 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 4 Sep 2012 07:49:03 +0000 Subject: netfilter: take care of timewait sockets Sami Farin reported crashes in xt_LOG because it assumes skb->sk is a full blown socket. Since (41063e9 ipv4: Early TCP socket demux), we can have skb->sk pointing to a timewait socket. Same fix is needed in nfnetlink_log. Diagnosed-by: Florian Westphal Reported-by: Sami Farin Signed-off-by: Eric Dumazet Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nfnetlink_log.c b/net/netfilter/nfnetlink_log.c index 14e2f39..5cfb5be 100644 --- a/net/netfilter/nfnetlink_log.c +++ b/net/netfilter/nfnetlink_log.c @@ -381,6 +381,7 @@ __build_packet_message(struct nfulnl_instance *inst, struct nlmsghdr *nlh; struct nfgenmsg *nfmsg; sk_buff_data_t old_tail = inst->skb->tail; + struct sock *sk; nlh = nlmsg_put(inst->skb, 0, 0, NFNL_SUBSYS_ULOG << 8 | NFULNL_MSG_PACKET, @@ -499,18 +500,19 @@ __build_packet_message(struct nfulnl_instance *inst, } /* UID */ - if (skb->sk) { - read_lock_bh(&skb->sk->sk_callback_lock); - if (skb->sk->sk_socket && skb->sk->sk_socket->file) { - struct file *file = skb->sk->sk_socket->file; + sk = skb->sk; + if (sk && sk->sk_state != TCP_TIME_WAIT) { + read_lock_bh(&sk->sk_callback_lock); + if (sk->sk_socket && sk->sk_socket->file) { + struct file *file = sk->sk_socket->file; __be32 uid = htonl(file->f_cred->fsuid); __be32 gid = htonl(file->f_cred->fsgid); - read_unlock_bh(&skb->sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); if (nla_put_be32(inst->skb, NFULA_UID, uid) || nla_put_be32(inst->skb, NFULA_GID, gid)) goto nla_put_failure; } else - read_unlock_bh(&skb->sk->sk_callback_lock); + read_unlock_bh(&sk->sk_callback_lock); } /* local sequence number */ diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index ff5f75f..2a4f969 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -145,6 +145,19 @@ static int dump_tcp_header(struct sbuff *m, const struct sk_buff *skb, return 0; } +static void dump_sk_uid_gid(struct sbuff *m, struct sock *sk) +{ + if (!sk || sk->sk_state == TCP_TIME_WAIT) + return; + + read_lock_bh(&sk->sk_callback_lock); + if (sk->sk_socket && sk->sk_socket->file) + sb_add(m, "UID=%u GID=%u ", + sk->sk_socket->file->f_cred->fsuid, + sk->sk_socket->file->f_cred->fsgid); + read_unlock_bh(&sk->sk_callback_lock); +} + /* One level of recursion won't kill us */ static void dump_ipv4_packet(struct sbuff *m, const struct nf_loginfo *info, @@ -361,14 +374,8 @@ static void dump_ipv4_packet(struct sbuff *m, } /* Max length: 15 "UID=4294967295 " */ - if ((logflags & XT_LOG_UID) && !iphoff && skb->sk) { - read_lock_bh(&skb->sk->sk_callback_lock); - if (skb->sk->sk_socket && skb->sk->sk_socket->file) - sb_add(m, "UID=%u GID=%u ", - skb->sk->sk_socket->file->f_cred->fsuid, - skb->sk->sk_socket->file->f_cred->fsgid); - read_unlock_bh(&skb->sk->sk_callback_lock); - } + if ((logflags & XT_LOG_UID) && !iphoff) + dump_sk_uid_gid(m, skb->sk); /* Max length: 16 "MARK=0xFFFFFFFF " */ if (!iphoff && skb->mark) @@ -717,14 +724,8 @@ static void dump_ipv6_packet(struct sbuff *m, } /* Max length: 15 "UID=4294967295 " */ - if ((logflags & XT_LOG_UID) && recurse && skb->sk) { - read_lock_bh(&skb->sk->sk_callback_lock); - if (skb->sk->sk_socket && skb->sk->sk_socket->file) - sb_add(m, "UID=%u GID=%u ", - skb->sk->sk_socket->file->f_cred->fsuid, - skb->sk->sk_socket->file->f_cred->fsgid); - read_unlock_bh(&skb->sk->sk_callback_lock); - } + if ((logflags & XT_LOG_UID) && recurse) + dump_sk_uid_gid(m, skb->sk); /* Max length: 16 "MARK=0xFFFFFFFF " */ if (!recurse && skb->mark) -- cgit v0.10.2 From 1213a205f9ed27d97de3d5bed28fb085ef4853e2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 6 Sep 2012 14:58:00 +0200 Subject: ALSA: usb-audio: Fix bogus error messages for delay accounting The recent fix for the missing fine delayed time adjustment gives strange error messages at each start of the playback stream, such as delay: estimated 0, actual 352 delay: estimated 353, actual 705 These come from the sanity check in retire_playback_urb(). Before the stream is activated via start_endpoints(), a few silent packets have been already sent. And at this point the delay account is still in the state as if the new packets are just queued, so the driver gets confused and spews the bogus error messages. For fixing the issue, we just need to check whether the received packet is valid, whether it's zero sized or not. Reported-by: Markus Trippelsdorf Cc: [v3.5+] Signed-off-by: Takashi Iwai diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index fd5e982..f782ce1 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -1140,6 +1140,12 @@ static void retire_playback_urb(struct snd_usb_substream *subs, int processed = urb->transfer_buffer_length / stride; int est_delay; + /* ignore the delay accounting when procssed=0 is given, i.e. + * silent payloads are procssed before handling the actual data + */ + if (!processed) + return; + spin_lock_irqsave(&subs->lock, flags); est_delay = snd_usb_pcm_delay(subs, runtime->rate); /* update delay with exact number of samples played */ -- cgit v0.10.2 From 1f1ea6c2d9d8c0be9ec56454b05315273b5de8ce Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Sun, 26 Aug 2012 11:44:43 -0700 Subject: NFSv4: Fix buffer overflow checking in __nfs4_get_acl_uncached Pass the checks made by decode_getacl back to __nfs4_get_acl_uncached so that it knows if the acl has been truncated. The current overflow checking is broken, resulting in Oopses on user-triggered nfs4_getfacl calls, and is opaque to the point where several attempts at fixing it have failed. This patch tries to clean up the code in addition to fixing the Oopses by ensuring that the overflow checks are performed in a single place (decode_getacl). If the overflow check failed, we will still be able to report the acl length, but at least we will no longer attempt to cache the acl or copy the truncated contents to user space. Reported-by: Sachin Prabhu Signed-off-by: Trond Myklebust Tested-by: Sachin Prabhu diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 6b94f2d..1e50326 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3739,7 +3739,7 @@ static void nfs4_write_cached_acl(struct inode *inode, struct page **pages, size struct nfs4_cached_acl *acl; size_t buflen = sizeof(*acl) + acl_len; - if (pages && buflen <= PAGE_SIZE) { + if (buflen <= PAGE_SIZE) { acl = kmalloc(buflen, GFP_KERNEL); if (acl == NULL) goto out; @@ -3784,7 +3784,6 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu }; unsigned int npages = DIV_ROUND_UP(buflen, PAGE_SIZE); int ret = -ENOMEM, i; - size_t acl_len = 0; /* As long as we're doing a round trip to the server anyway, * let's be prepared for a page of acl data. */ @@ -3807,11 +3806,6 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu args.acl_len = npages * PAGE_SIZE; args.acl_pgbase = 0; - /* Let decode_getfacl know not to fail if the ACL data is larger than - * the page we send as a guess */ - if (buf == NULL) - res.acl_flags |= NFS4_ACL_LEN_REQUEST; - dprintk("%s buf %p buflen %zu npages %d args.acl_len %zu\n", __func__, buf, buflen, npages, args.acl_len); ret = nfs4_call_sync(NFS_SERVER(inode)->client, NFS_SERVER(inode), @@ -3819,20 +3813,19 @@ static ssize_t __nfs4_get_acl_uncached(struct inode *inode, void *buf, size_t bu if (ret) goto out_free; - acl_len = res.acl_len; - if (acl_len > args.acl_len) - nfs4_write_cached_acl(inode, NULL, 0, acl_len); - else - nfs4_write_cached_acl(inode, pages, res.acl_data_offset, - acl_len); - if (buf) { + /* Handle the case where the passed-in buffer is too short */ + if (res.acl_flags & NFS4_ACL_TRUNC) { + /* Did the user only issue a request for the acl length? */ + if (buf == NULL) + goto out_ok; ret = -ERANGE; - if (acl_len > buflen) - goto out_free; - _copy_from_pages(buf, pages, res.acl_data_offset, - acl_len); + goto out_free; } - ret = acl_len; + nfs4_write_cached_acl(inode, pages, res.acl_data_offset, res.acl_len); + if (buf) + _copy_from_pages(buf, pages, res.acl_data_offset, res.acl_len); +out_ok: + ret = res.acl_len; out_free: for (i = 0; i < npages; i++) if (pages[i]) diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 1bfbd67..541e796 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -5072,18 +5072,14 @@ static int decode_getacl(struct xdr_stream *xdr, struct rpc_rqst *req, * are stored with the acl data to handle the problem of * variable length bitmaps.*/ res->acl_data_offset = xdr_stream_pos(xdr) - pg_offset; - - /* We ignore &savep and don't do consistency checks on - * the attr length. Let userspace figure it out.... */ res->acl_len = attrlen; - if (attrlen > (xdr->nwords << 2)) { - if (res->acl_flags & NFS4_ACL_LEN_REQUEST) { - /* getxattr interface called with a NULL buf */ - goto out; - } + + /* Check for receive buffer overflow */ + if (res->acl_len > (xdr->nwords << 2) || + res->acl_len + res->acl_data_offset > xdr->buf->page_len) { + res->acl_flags |= NFS4_ACL_TRUNC; dprintk("NFS: acl reply: attrlen %u > page_len %u\n", attrlen, xdr->nwords << 2); - return -EINVAL; } } else status = -EOPNOTSUPP; diff --git a/include/linux/nfs_xdr.h b/include/linux/nfs_xdr.h index ac7c8ae..be9cf3c 100644 --- a/include/linux/nfs_xdr.h +++ b/include/linux/nfs_xdr.h @@ -652,7 +652,7 @@ struct nfs_getaclargs { }; /* getxattr ACL interface flags */ -#define NFS4_ACL_LEN_REQUEST 0x0001 /* zero length getxattr buffer */ +#define NFS4_ACL_TRUNC 0x0001 /* ACL was truncated */ struct nfs_getaclres { size_t acl_len; size_t acl_data_offset; -- cgit v0.10.2 From ea0e627623e236e4cbec9f44b4a755bc4a4b852d Mon Sep 17 00:00:00 2001 From: Andrzej Pietrasiewicz Date: Mon, 11 Jun 2012 11:13:15 +0200 Subject: usb: gadget: add multiple definition guards If f_fs.c and u_serial.c are combined together using #include, which has been a common practice so far, the pr_vdebug macro is defined multiple times. Define it only once. Acked-by: Randy Dunlap Signed-off-by: Andrzej Pietrasiewicz Signed-off-by: Kyungmin Park Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 8adc79d..829aba7 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -34,11 +34,15 @@ /* Debugging ****************************************************************/ #ifdef VERBOSE_DEBUG +#ifndef pr_vdebug # define pr_vdebug pr_debug +#endif /* pr_vdebug */ # define ffs_dump_mem(prefix, ptr, len) \ print_hex_dump_bytes(pr_fmt(prefix ": "), DUMP_PREFIX_NONE, ptr, len) #else +#ifndef pr_vdebug # define pr_vdebug(...) do { } while (0) +#endif /* pr_vdebug */ # define ffs_dump_mem(prefix, ptr, len) do { } while (0) #endif /* VERBOSE_DEBUG */ diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 5b3f5ff..da6d479 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -132,11 +132,15 @@ static unsigned n_ports; #ifdef VERBOSE_DEBUG +#ifndef pr_vdebug #define pr_vdebug(fmt, arg...) \ pr_debug(fmt, ##arg) +#endif /* pr_vdebug */ #else +#ifndef pr_vdebig #define pr_vdebug(fmt, arg...) \ ({ if (0) pr_debug(fmt, ##arg); }) +#endif /* pr_vdebug */ #endif /*-------------------------------------------------------------------------*/ -- cgit v0.10.2 From 0416e494ce7dc84e2719bc9fb7daecb330476074 Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Fri, 10 Aug 2012 13:42:16 +0530 Subject: usb: dwc3: ep0: correct cache sync issue in case of ep0_bounced In case of ep0 out, if length is not aligned to maxpacket size then we use dwc->ep_bounce_addr for dma transfer and not request->dma. Since, we have alreday done memcpy from dwc->ep0_bounce to request->buf, so we do not need to issue cache sync function. In fact, cache sync function will bring wrong data in request->buf from request->dma in this scenario. So, cache sync function must not be executed in case of ep0 bounced. Cc: # v3.4 v3.5 Signed-off-by: Pratyush Anand Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 9b94886..e4d5ca8 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -720,7 +720,6 @@ static void dwc3_ep0_complete_data(struct dwc3 *dwc, transferred = min_t(u32, ur->length, transfer_size - length); memcpy(ur->buf, dwc->ep0_bounce, transferred); - dwc->ep0_bounced = false; } else { transferred = ur->length - length; } diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 58fdfad..c99568e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -263,8 +263,11 @@ void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, if (req->request.status == -EINPROGRESS) req->request.status = status; - usb_gadget_unmap_request(&dwc->gadget, &req->request, - req->direction); + if (dwc->ep0_bounced && dep->number == 0) + dwc->ep0_bounced = false; + else + usb_gadget_unmap_request(&dwc->gadget, &req->request, + req->direction); dev_dbg(dwc->dev, "request %p from %s completed %d/%d ===> %d\n", req, dep->name, req->request.actual, -- cgit v0.10.2 From c8e6507bdec67f1c50390a69a14568c5115cc658 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 14 Aug 2012 08:47:34 +0200 Subject: usb: gadget: s3c-hsotg.c: fix error return code Convert a 0 error return code to a negative one, as returned elsewhere in the function. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // @@ identifier ret; expression e,e1,e2,e3,e4,x; @@ ( if (\(ret != 0\|ret < 0\) || ...) { ... return ...; } | ret = 0 ) ... when != ret = e1 *x = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\|ioremap\|ioremap_nocache\|devm_ioremap\|devm_ioremap_nocache\)(...); ... when != x = e2 when != ret = e3 *if (x == NULL || ...) { ... when != ret = e4 * return ret; } // Signed-off-by: Julia Lawall Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index b13e0bb..0bb617e 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -3599,6 +3599,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) if (hsotg->num_of_eps == 0) { dev_err(dev, "wrong number of EPs (zero)\n"); + ret = -EINVAL; goto err_supplies; } @@ -3606,6 +3607,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!eps) { dev_err(dev, "cannot get memory\n"); + ret = -ENOMEM; goto err_supplies; } @@ -3622,6 +3624,7 @@ static int __devinit s3c_hsotg_probe(struct platform_device *pdev) GFP_KERNEL); if (!hsotg->ctrl_req) { dev_err(dev, "failed to allocate ctrl req\n"); + ret = -ENOMEM; goto err_ep_mem; } -- cgit v0.10.2 From 1b68a4ca2d038addb7314211d122fb6d7002b38b Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 19 Aug 2012 21:54:58 +0200 Subject: usb: gadget: dummy_hcd: fixup error probe path If USB2 host controller probes fine but USB3 does not then we don't remove the USB controller properly and lock up the system while the HUB code will try to enumerate the USB2 controller and access memory which is no longer available in case the dummy_hcd was compiled as a module. This is a problem since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.) if used in USB3 mode because dummy does not provide this descriptor and explodes later. Cc: stable@vger.kernel.org # v3.5 Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index b799106..0e58a46 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -2503,10 +2503,8 @@ static int dummy_hcd_probe(struct platform_device *pdev) hs_hcd->has_tt = 1; retval = usb_add_hcd(hs_hcd, 0, 0); - if (retval != 0) { - usb_put_hcd(hs_hcd); - return retval; - } + if (retval) + goto put_usb2_hcd; if (mod_data.is_super_speed) { ss_hcd = usb_create_shared_hcd(&dummy_hcd, &pdev->dev, @@ -2525,6 +2523,8 @@ static int dummy_hcd_probe(struct platform_device *pdev) put_usb3_hcd: usb_put_hcd(ss_hcd); dealloc_usb2_hcd: + usb_remove_hcd(hs_hcd); +put_usb2_hcd: usb_put_hcd(hs_hcd); the_controller.hs_hcd = the_controller.ss_hcd = NULL; return retval; -- cgit v0.10.2 From 3b9c1c5ba7a95caae8440ea47308496b14f7301a Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Sun, 19 Aug 2012 21:54:59 +0200 Subject: usb: gadget: dummy_hcd: add support for USB_DT_BOS on rh Without a reply for USB_DT_BOS the USB3 mode does not work since 448b6eb1 ("USB: Make sure to fetch the BOS desc for roothubs.). Cc: stable@vger.kernel.org #v3.5 Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 0e58a46..afdbb1c 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1916,6 +1916,27 @@ done: return retval; } +/* usb 3.0 root hub device descriptor */ +struct { + struct usb_bos_descriptor bos; + struct usb_ss_cap_descriptor ss_cap; +} __packed usb3_bos_desc = { + + .bos = { + .bLength = USB_DT_BOS_SIZE, + .bDescriptorType = USB_DT_BOS, + .wTotalLength = cpu_to_le16(sizeof(usb3_bos_desc)), + .bNumDeviceCaps = 1, + }, + .ss_cap = { + .bLength = USB_DT_USB_SS_CAP_SIZE, + .bDescriptorType = USB_DT_DEVICE_CAPABILITY, + .bDevCapabilityType = USB_SS_CAP_TYPE, + .wSpeedSupported = cpu_to_le16(USB_5GBPS_OPERATION), + .bFunctionalitySupport = ilog2(USB_5GBPS_OPERATION), + }, +}; + static inline void ss_hub_descriptor(struct usb_hub_descriptor *desc) { @@ -2006,6 +2027,18 @@ static int dummy_hub_control( else hub_descriptor((struct usb_hub_descriptor *) buf); break; + + case DeviceRequest | USB_REQ_GET_DESCRIPTOR: + if (hcd->speed != HCD_USB3) + goto error; + + if ((wValue >> 8) != USB_DT_BOS) + goto error; + + memcpy(buf, &usb3_bos_desc, sizeof(usb3_bos_desc)); + retval = sizeof(usb3_bos_desc); + break; + case GetHubStatus: *(__le32 *) buf = cpu_to_le32(0); break; -- cgit v0.10.2 From 3067779b1566ae5fb6af40f03ae874ac47035523 Mon Sep 17 00:00:00 2001 From: yuzheng ma Date: Wed, 15 Aug 2012 16:11:40 +0800 Subject: usb: musb: host: fix for musb_start_urb Oops when using musb_urb_enqueue to submit three urbs to the same endpoint, when hep->hcpriv is NULL, qh will be allocated when the first urb is completed. When the IRQ completes the next two urbs, qh->hep->hcpriv will be set to NULL. Now the second urb get musb->lock and executes musb_schedule(), but next_urb(qh) is NULL, so musb_start_urb will Oops. [ balbi@ti.com : practically rewrote commit log so it makes sense ] Signed-off-by: mayuzheng Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 4bb717d..1ae378d 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2049,7 +2049,7 @@ static int musb_urb_enqueue( * we only have work to do in the former case. */ spin_lock_irqsave(&musb->lock, flags); - if (hep->hcpriv) { + if (hep->hcpriv || !next_urb(qh)) { /* some concurrent activity submitted another urb to hep... * odd, rare, error prone, but legal. */ -- cgit v0.10.2 From ff41aaa3b6c181a713078d8ad96da4ba822de436 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 20 Aug 2012 22:31:41 +0400 Subject: usb: musb: tusb6010: fix error path in tusb_probe() On platform_device_add() failure, the TUSB6010 glue layer forgets to call platform_device_put() -- probably due to a typo... Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 1a1bd9c..3416254 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -1215,7 +1215,7 @@ static int __devinit tusb_probe(struct platform_device *pdev) ret = platform_device_add(musb); if (ret) { dev_err(&pdev->dev, "failed to register musb device\n"); - goto err1; + goto err2; } return 0; -- cgit v0.10.2 From 7effdbd6512083e21c007edbaca0ceff4aa5159f Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Mon, 20 Aug 2012 22:34:46 +0400 Subject: usb: musb: musbhsdma: fix IRQ check dma_controller_create() in this MUSB DMA driver only regards 0 as a wrong IRQ number, despite platform_get_irq_byname() that it calls returns -ENXIO in that case. It leads to calling request_irq() with a negative IRQ number, and when it naturally fails, the following is printed to the console: request_irq -6 failed! and the DMA controller is not created. Fix this function to filter out the error values as well as 0. Signed-off-by: Sergei Shtylyov Signed-off-by: Felipe Balbi diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c index 57a6085..c1be687 100644 --- a/drivers/usb/musb/musbhsdma.c +++ b/drivers/usb/musb/musbhsdma.c @@ -388,7 +388,7 @@ dma_controller_create(struct musb *musb, void __iomem *base) struct platform_device *pdev = to_platform_device(dev); int irq = platform_get_irq_byname(pdev, "dma"); - if (irq == 0) { + if (irq <= 0) { dev_err(dev, "No DMA interrupt line!\n"); return NULL; } -- cgit v0.10.2 From 066618bc350cc6035c3a0fc559a8ac02f55785a9 Mon Sep 17 00:00:00 2001 From: Kishon Vijay Abraham I Date: Tue, 21 Aug 2012 14:56:16 +0530 Subject: usb: dwc3: core: fix incorrect usage of resource pointer Populate the resources for xhci afresh instead of directly using the *struct resource* of core. *resource* structure has parent, sibling, child pointers which should be filled only by resource API's. By directly using the *resource* pointer of core in xhci, these parent, sibling, child pointers are already populated even before *platform_device_add* causing side effects. Cc: stable@vger.kernel.org # v3.4, v3.5 Reported-by: Ruchika Kharwar Tested-by: Moiz Sonasath Signed-off-by: Kishon Vijay Abraham I Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index c34452a..a68ff53 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -436,16 +436,21 @@ static int __devinit dwc3_probe(struct platform_device *pdev) dev_err(dev, "missing IRQ\n"); return -ENODEV; } - dwc->xhci_resources[1] = *res; + dwc->xhci_resources[1].start = res->start; + dwc->xhci_resources[1].end = res->end; + dwc->xhci_resources[1].flags = res->flags; + dwc->xhci_resources[1].name = res->name; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!res) { dev_err(dev, "missing memory resource\n"); return -ENODEV; } - dwc->xhci_resources[0] = *res; + dwc->xhci_resources[0].start = res->start; dwc->xhci_resources[0].end = dwc->xhci_resources[0].start + DWC3_XHCI_REGS_END; + dwc->xhci_resources[0].flags = res->flags; + dwc->xhci_resources[0].name = res->name; /* * Request memory region but exclude xHCI regs, -- cgit v0.10.2 From 8b7dda554cf61e87523dee412eaf598f8646bd79 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 20 Jul 2012 20:34:24 +0200 Subject: usb: gadget: at91udc: don't overwrite driver data The driver was converted to the new start/stop interface in f3d8bf34c2 ("usb: gadget: at91_udc: convert to new style start/stop interface"). I overlooked that the driver is overwritting the private data which is used by the composite framework. The udc driver doesn't read it, it is only written here. Tested-by: Fabio Porcedda Tested-by: Mario Isidoro Cc: # v3.5 Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index c9e66df..14df835 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1635,7 +1635,6 @@ static int at91_start(struct usb_gadget *gadget, udc->driver = driver; udc->gadget.dev.driver = &driver->driver; udc->gadget.dev.of_node = udc->pdev->dev.of_node; - dev_set_drvdata(&udc->gadget.dev, &driver->driver); udc->enabled = 1; udc->selfpowered = 1; @@ -1656,7 +1655,6 @@ static int at91_stop(struct usb_gadget *gadget, spin_unlock_irqrestore(&udc->lock, flags); udc->gadget.dev.driver = NULL; - dev_set_drvdata(&udc->gadget.dev, NULL); udc->driver = NULL; DBG("unbound from %s\n", driver->driver.name); -- cgit v0.10.2 From f3bb8e63a8ee0398dffe412e774d8801db7e1bf1 Mon Sep 17 00:00:00 2001 From: Sebastian Andrzej Siewior Date: Fri, 20 Jul 2012 20:34:25 +0200 Subject: usb: gadget: at91udc: Don't check for ep->ep.desc Earlier we used to check for ep->ep.desc to figure out if this ep has already been enabled and if so, abort. Ido Shayevitz removed the usb_endpoint_descriptor from private udc structure 5a6506f00 ("usb: gadget: Update at91_udc to use usb_endpoint_descriptor inside the struct usb_ep") but did not fix up the ep_enable condition because _now_ the member is always true and we can't check if this ep is enabled twice. Cc: Ido Shayevitz Tested-by: Fabio Porcedda Tested-by: Mario Isidoro Cc: # v3.5 Signed-off-by: Sebastian Andrzej Siewior Signed-off-by: Felipe Balbi diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index 14df835..1e35963 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -475,8 +475,7 @@ static int at91_ep_enable(struct usb_ep *_ep, unsigned long flags; if (!_ep || !ep - || !desc || ep->ep.desc - || _ep->name == ep0name + || !desc || _ep->name == ep0name || desc->bDescriptorType != USB_DT_ENDPOINT || (maxpacket = usb_endpoint_maxp(desc)) == 0 || maxpacket > ep->maxpacket) { @@ -530,7 +529,6 @@ ok: tmp |= AT91_UDP_EPEDS; __raw_writel(tmp, ep->creg); - ep->ep.desc = desc; ep->ep.maxpacket = maxpacket; /* -- cgit v0.10.2 From 77975eec149506e457e6abe2ce43259895a9a16e Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Wed, 22 Aug 2012 18:01:13 -0700 Subject: usb: renesas_usbhs: fixup DMA transport data alignment renesas_usbhs dma can transport 8byte alignment data, not 4byte. This patch fixup it. Reported-by: Sugnan Prabhu S Signed-off-by: Kuninori Morimoto Signed-off-by: Felipe Balbi diff --git a/drivers/usb/renesas_usbhs/fifo.c b/drivers/usb/renesas_usbhs/fifo.c index ecd1730..143c4e9 100644 --- a/drivers/usb/renesas_usbhs/fifo.c +++ b/drivers/usb/renesas_usbhs/fifo.c @@ -818,7 +818,7 @@ static int usbhsf_dma_prepare_push(struct usbhs_pkt *pkt, int *is_done) usbhs_pipe_is_dcp(pipe)) goto usbhsf_pio_prepare_push; - if (len % 4) /* 32bit alignment */ + if (len & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_push; if ((uintptr_t)(pkt->buf + pkt->actual) & 0x7) /* 8byte alignment */ @@ -905,7 +905,7 @@ static int usbhsf_dma_try_pop(struct usbhs_pkt *pkt, int *is_done) /* use PIO if packet is less than pio_dma_border */ len = usbhsf_fifo_rcv_len(priv, fifo); len = min(pkt->length - pkt->actual, len); - if (len % 4) /* 32bit alignment */ + if (len & 0x7) /* 8byte alignment */ goto usbhsf_pio_prepare_pop_unselect; if (len < usbhs_get_dparam(priv, pio_dma_border)) -- cgit v0.10.2 From f4a53c55117b82e895ec98b1765c9d66940377fc Mon Sep 17 00:00:00 2001 From: Pratyush Anand Date: Thu, 30 Aug 2012 12:21:43 +0530 Subject: usb: dwc3: gadget: fix pending isoc handling If xfernotready is received and there is no request in request_list then REQUEST_PENDING flag must be set, so that next request in ep queue is executed. In case of isoc transfer, if xfernotready is already elapsed and even first request has not been queued to request_list, then issue END TRANSFER, so that you can receive xfernotready again and can have notion of current microframe. Signed-off-by: Pratyush Anand Signed-off-by: Felipe Balbi diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index c99568e..c2813c2b 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -1029,6 +1029,7 @@ static void __dwc3_gadget_start_isoc(struct dwc3 *dwc, if (list_empty(&dep->request_list)) { dev_vdbg(dwc->dev, "ISOC ep %s run out for requests.\n", dep->name); + dep->flags |= DWC3_EP_PENDING_REQUEST; return; } @@ -1092,6 +1093,17 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) if (dep->flags & DWC3_EP_PENDING_REQUEST) { int ret; + /* + * If xfernotready is already elapsed and it is a case + * of isoc transfer, then issue END TRANSFER, so that + * you can receive xfernotready again and can have + * notion of current microframe. + */ + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { + dwc3_stop_active_transfer(dwc, dep->number); + return 0; + } + ret = __dwc3_gadget_kick_transfer(dep, 0, true); if (ret && ret != -EBUSY) { struct dwc3 *dwc = dep->dwc; -- cgit v0.10.2 From 60e233a56609fd963c59e99bd75c663d63fa91b6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 2 Sep 2012 15:41:34 +0200 Subject: kobject: fix oops with "input0: bad kobj_uevent_env content in show_uevent()" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fengguang Wu writes: > After the __devinit* removal series, I can still get kernel panic in > show_uevent(). So there are more sources of bug.. > > Debug patch: > > @@ -343,8 +343,11 @@ static ssize_t show_uevent(struct device > goto out; > > /* copy keys to file */ > - for (i = 0; i < env->envp_idx; i++) > + dev_err(dev, "uevent %d env[%d]: %s/.../%s\n", env->buflen, env->envp_idx, top_kobj->name, dev->kobj.name); > + for (i = 0; i < env->envp_idx; i++) { > + printk(KERN_ERR "uevent %d env[%d]: %s\n", (int)count, i, env->envp[i]); > count += sprintf(&buf[count], "%s\n", env->envp[i]); > + } > > Oops message, the env[] is again not properly initilized: > > [ 44.068623] input input0: uevent 61 env[805306368]: input0/.../input0 > [ 44.069552] uevent 0 env[0]: (null) This is a completely different CONFIG_HOTPLUG problem, only demonstrating another reason why CONFIG_HOTPLUG should go away. I had a hard time trying to disable it anyway ;-) The problem this time is lots of code assuming that a call to add_uevent_var() will guarantee that env->buflen > 0. This is not true if CONFIG_HOTPLUG is unset. So things like this end up overwriting env->envp_idx because the array index is -1: if (add_uevent_var(env, "MODALIAS=")) return -ENOMEM; len = input_print_modalias(&env->buf[env->buflen - 1], sizeof(env->buf) - env->buflen, dev, 0); Don't know what the best action is, given that there seem to be a *lot* of this around the kernel. This patch "fixes" the problem for me, but I don't know if it can be considered an appropriate fix. [ It is the correct fix for now, for 3.7 forcing CONFIG_HOTPLUG to always be on is the longterm fix, but it's too late for 3.6 and older kernels to resolve this that way - gregkh ] Reported-by: Fengguang Wu Signed-off-by: Bjørn Mork Tested-by: Fengguang Wu Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/include/linux/kobject.h b/include/linux/kobject.h index fc615a9..1e57449 100644 --- a/include/linux/kobject.h +++ b/include/linux/kobject.h @@ -224,7 +224,7 @@ static inline int kobject_uevent_env(struct kobject *kobj, static inline __printf(2, 3) int add_uevent_var(struct kobj_uevent_env *env, const char *format, ...) -{ return 0; } +{ return -ENOMEM; } static inline int kobject_action_type(const char *buf, size_t count, enum kobject_action *type) -- cgit v0.10.2 From e2f2886a824ff0a56da1eaa13019fde86aa89fa6 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Wed, 29 Aug 2012 21:13:38 +0400 Subject: CIFS: Fix error handling in cifs_push_mandatory_locks Cc: Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 9154192..71e9ad9 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -917,7 +917,7 @@ cifs_push_mandatory_locks(struct cifsFileInfo *cfile) if (!buf) { mutex_unlock(&cinode->lock_mutex); free_xid(xid); - return rc; + return -ENOMEM; } for (i = 0; i < 2; i++) { -- cgit v0.10.2 From b2ede58e98c87c7f0f44a926f974262f65c3402f Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Tue, 4 Sep 2012 15:49:31 +0400 Subject: CIFS: Fix endianness conversion Signed-off-by: Pavel Shilovsky Signed-off-by: Steve French diff --git a/fs/cifs/smb2pdu.h b/fs/cifs/smb2pdu.h index c5fbfac..15dc8ee 100644 --- a/fs/cifs/smb2pdu.h +++ b/fs/cifs/smb2pdu.h @@ -96,7 +96,7 @@ * */ -#define SMB2_HEADER_STRUCTURE_SIZE __constant_le16_to_cpu(64) +#define SMB2_HEADER_STRUCTURE_SIZE __constant_cpu_to_le16(64) struct smb2_hdr { __be32 smb2_buf_length; /* big endian on wire */ @@ -140,7 +140,7 @@ struct smb2_pdu { * */ -#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_le16_to_cpu(9) +#define SMB2_ERROR_STRUCTURE_SIZE2 __constant_cpu_to_le16(9) struct smb2_err_rsp { struct smb2_hdr hdr; -- cgit v0.10.2 From 01913b49cf1dc6409a07dd2a4cc6af2e77f3c410 Mon Sep 17 00:00:00 2001 From: Weston Andros Adamson Date: Thu, 6 Sep 2012 15:54:27 -0400 Subject: NFS: return error from decode_getfh in decode open If decode_getfh failed, nfs4_xdr_dec_open would return 0 since the last decode_* call must have succeeded. Cc: stable@vger.kernel.org Signed-off-by: Weston Andros Adamson Signed-off-by: Trond Myklebust diff --git a/fs/nfs/nfs4xdr.c b/fs/nfs/nfs4xdr.c index 541e796..8dba6bd 100644 --- a/fs/nfs/nfs4xdr.c +++ b/fs/nfs/nfs4xdr.c @@ -6225,7 +6225,8 @@ static int nfs4_xdr_dec_open(struct rpc_rqst *rqstp, struct xdr_stream *xdr, status = decode_open(xdr, res); if (status) goto out; - if (decode_getfh(xdr, &res->fh) != 0) + status = decode_getfh(xdr, &res->fh); + if (status) goto out; decode_getfattr(xdr, res->f_attr, res->server); out: -- cgit v0.10.2 From 3b75a2c126c4b573553856e0fe08d1bb020ca8c3 Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Thu, 23 Aug 2012 18:39:57 -0400 Subject: crypto/caam: Export gen_split_key symbol for other modules In 3.6-rc3, without this patch, the following error occurs with a modular build: ERROR: "gen_split_key" [drivers/crypto/caam/caamhash.ko] undefined! ERROR: "gen_split_key" [drivers/crypto/caam/caamalg.ko] undefined! Signed-off-by: Ben Collins Cc: Yuan Kang Acked-by: Kim Phillips Signed-off-by: Herbert Xu diff --git a/drivers/crypto/caam/key_gen.c b/drivers/crypto/caam/key_gen.c index 0028881..d216cd3 100644 --- a/drivers/crypto/caam/key_gen.c +++ b/drivers/crypto/caam/key_gen.c @@ -120,3 +120,4 @@ u32 gen_split_key(struct device *jrdev, u8 *key_out, int split_key_len, return ret; } +EXPORT_SYMBOL(gen_split_key); -- cgit v0.10.2 From a32826e4aefa905b392d2d862d51365d50d4829b Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Thu, 6 Sep 2012 17:47:33 -0600 Subject: ASoC: tegra: fix maxburst settings in dmaengine code The I2S controllers are programmed with an "attention" level of 4 DWORDs. This must match the configuration passed to the DMA driver, so that when they burst in data, they don't overflow the available FIFO space. Also, the burst size is relevant to the destination for playback, and source for capture, not vice-versa as originally written. Signed-off-by: Stephen Warren Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/tegra/tegra_pcm.c b/sound/soc/tegra/tegra_pcm.c index 5658bce..8d6900c 100644 --- a/sound/soc/tegra/tegra_pcm.c +++ b/sound/soc/tegra/tegra_pcm.c @@ -334,11 +334,11 @@ static int tegra_pcm_hw_params(struct snd_pcm_substream *substream, if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slave_config.dst_addr = dmap->addr; - slave_config.src_maxburst = 0; + slave_config.dst_maxburst = 4; } else { slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; slave_config.src_addr = dmap->addr; - slave_config.dst_maxburst = 0; + slave_config.src_maxburst = 4; } slave_config.slave_id = dmap->req_sel; -- cgit v0.10.2 From 5d2afab958f8cd203a8fe639082b5b5e74f748f9 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 28 Aug 2012 21:38:49 -0400 Subject: drm/vmwgfx: allow a kconfig option to choose if fbcon is enabled This makes things easier for distros where we'd like to have fbcon enabled all the time. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/Kconfig b/drivers/gpu/drm/vmwgfx/Kconfig index 794ff67..b71bcd0 100644 --- a/drivers/gpu/drm/vmwgfx/Kconfig +++ b/drivers/gpu/drm/vmwgfx/Kconfig @@ -12,3 +12,11 @@ config DRM_VMWGFX This is a KMS enabled DRM driver for the VMware SVGA2 virtual hardware. The compiled module will be called "vmwgfx.ko". + +config DRM_VMWGFX_FBCON + depends on DRM_VMWGFX + bool "Enable framebuffer console under vmwgfx by default" + help + Choose this option if you are shipping a new vmwgfx + userspace driver that supports using the kernel driver. + diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 4d9edea..7f4f4ee 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -183,7 +183,7 @@ static struct pci_device_id vmw_pci_id_list[] = { {0, 0, 0} }; -static int enable_fbdev; +static int enable_fbdev = IS_ENABLED(CONFIG_DRM_VMWGFX_FBCON); static int vmw_probe(struct pci_dev *, const struct pci_device_id *); static void vmw_master_init(struct vmw_master *); -- cgit v0.10.2 From c4903429a92be60e6fe59868924a65eca4cd1a38 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 28 Aug 2012 21:40:51 -0400 Subject: drm/vmwgfx: add MODULE_DEVICE_TABLE so vmwgfx loads at boot This will cause udev to load vmwgfx instead of waiting for X to do it. Reviewed-by: Jakob Bornecrantz Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 7f4f4ee..33bfc20 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -182,6 +182,7 @@ static struct pci_device_id vmw_pci_id_list[] = { {0x15ad, 0x0405, PCI_ANY_ID, PCI_ANY_ID, 0, 0, VMWGFX_CHIP_SVGAII}, {0, 0, 0} }; +MODULE_DEVICE_TABLE(pci, vmw_pci_id_list); static int enable_fbdev = IS_ENABLED(CONFIG_DRM_VMWGFX_FBCON); -- cgit v0.10.2 From 50888469bda11bcff306893bbaff21f25894be0b Mon Sep 17 00:00:00 2001 From: Steven Miao Date: Tue, 31 Jul 2012 17:28:10 +0800 Subject: blackfin: smp: adapt to generic smp helpers Replace blackfin ipi message queue with generic smp helper function. Signed-off-by: Steven Miao Signed-off-by: Bob Liu diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index f348619..c7092e6 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -38,6 +38,7 @@ config BLACKFIN select GENERIC_ATOMIC64 select GENERIC_IRQ_PROBE select IRQ_PER_CPU if SMP + select USE_GENERIC_SMP_HELPERS if SMP select HAVE_NMI_WATCHDOG if NMI_WATCHDOG select GENERIC_SMP_IDLE_THREAD select ARCH_USES_GETTIMEOFFSET if !GENERIC_CLOCKEVENTS diff --git a/arch/blackfin/include/asm/smp.h b/arch/blackfin/include/asm/smp.h index dc3d144..9631598 100644 --- a/arch/blackfin/include/asm/smp.h +++ b/arch/blackfin/include/asm/smp.h @@ -18,6 +18,8 @@ #define raw_smp_processor_id() blackfin_core_id() extern void bfin_relocate_coreb_l1_mem(void); +extern void arch_send_call_function_single_ipi(int cpu); +extern void arch_send_call_function_ipi_mask(const struct cpumask *mask); #if defined(CONFIG_SMP) && defined(CONFIG_ICACHE_FLUSH_L1) asmlinkage void blackfin_icache_flush_range_l1(unsigned long *ptr); diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 00bbe67..a401513 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -48,10 +48,13 @@ unsigned long blackfin_iflush_l1_entry[NR_CPUS]; struct blackfin_initial_pda __cpuinitdata initial_pda_coreb; -#define BFIN_IPI_TIMER 0 -#define BFIN_IPI_RESCHEDULE 1 -#define BFIN_IPI_CALL_FUNC 2 -#define BFIN_IPI_CPU_STOP 3 +enum ipi_message_type { + BFIN_IPI_TIMER, + BFIN_IPI_RESCHEDULE, + BFIN_IPI_CALL_FUNC, + BFIN_IPI_CALL_FUNC_SINGLE, + BFIN_IPI_CPU_STOP, +}; struct blackfin_flush_data { unsigned long start; @@ -60,35 +63,20 @@ struct blackfin_flush_data { void *secondary_stack; - -struct smp_call_struct { - void (*func)(void *info); - void *info; - int wait; - cpumask_t *waitmask; -}; - static struct blackfin_flush_data smp_flush_data; static DEFINE_SPINLOCK(stop_lock); -struct ipi_message { - unsigned long type; - struct smp_call_struct call_struct; -}; - /* A magic number - stress test shows this is safe for common cases */ #define BFIN_IPI_MSGQ_LEN 5 /* Simple FIFO buffer, overflow leads to panic */ -struct ipi_message_queue { - spinlock_t lock; +struct ipi_data { unsigned long count; - unsigned long head; /* head of the queue */ - struct ipi_message ipi_message[BFIN_IPI_MSGQ_LEN]; + unsigned long bits; }; -static DEFINE_PER_CPU(struct ipi_message_queue, ipi_msg_queue); +static DEFINE_PER_CPU(struct ipi_data, bfin_ipi); static void ipi_cpu_stop(unsigned int cpu) { @@ -129,28 +117,6 @@ static void ipi_flush_icache(void *info) blackfin_icache_flush_range(fdata->start, fdata->end); } -static void ipi_call_function(unsigned int cpu, struct ipi_message *msg) -{ - int wait; - void (*func)(void *info); - void *info; - func = msg->call_struct.func; - info = msg->call_struct.info; - wait = msg->call_struct.wait; - func(info); - if (wait) { -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * 'wait' usually means synchronization between CPUs. - * Invalidate D cache in case shared data was changed - * by func() to ensure cache coherence. - */ - resync_core_dcache(); -#endif - cpumask_clear_cpu(cpu, msg->call_struct.waitmask); - } -} - /* Use IRQ_SUPPLE_0 to request reschedule. * When returning from interrupt to user space, * there is chance to reschedule */ @@ -172,152 +138,95 @@ void ipi_timer(void) static irqreturn_t ipi_handler_int1(int irq, void *dev_instance) { - struct ipi_message *msg; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; unsigned int cpu = smp_processor_id(); - unsigned long flags; + unsigned long pending; + unsigned long msg; platform_clear_ipi(cpu, IRQ_SUPPLE_1); - msg_queue = &__get_cpu_var(ipi_msg_queue); - - spin_lock_irqsave(&msg_queue->lock, flags); - - while (msg_queue->count) { - msg = &msg_queue->ipi_message[msg_queue->head]; - switch (msg->type) { - case BFIN_IPI_TIMER: - ipi_timer(); - break; - case BFIN_IPI_RESCHEDULE: - scheduler_ipi(); - break; - case BFIN_IPI_CALL_FUNC: - ipi_call_function(cpu, msg); - break; - case BFIN_IPI_CPU_STOP: - ipi_cpu_stop(cpu); - break; - default: - printk(KERN_CRIT "CPU%u: Unknown IPI message 0x%lx\n", - cpu, msg->type); - break; - } - msg_queue->head++; - msg_queue->head %= BFIN_IPI_MSGQ_LEN; - msg_queue->count--; + bfin_ipi_data = &__get_cpu_var(bfin_ipi); + + while ((pending = xchg(&bfin_ipi_data->bits, 0)) != 0) { + msg = 0; + do { + msg = find_next_bit(&pending, BITS_PER_LONG, msg + 1); + switch (msg) { + case BFIN_IPI_TIMER: + ipi_timer(); + break; + case BFIN_IPI_RESCHEDULE: + scheduler_ipi(); + break; + case BFIN_IPI_CALL_FUNC: + generic_smp_call_function_interrupt(); + break; + + case BFIN_IPI_CALL_FUNC_SINGLE: + generic_smp_call_function_single_interrupt(); + break; + + case BFIN_IPI_CPU_STOP: + ipi_cpu_stop(cpu); + break; + } + } while (msg < BITS_PER_LONG); + + smp_mb(); } - spin_unlock_irqrestore(&msg_queue->lock, flags); return IRQ_HANDLED; } -static void ipi_queue_init(void) +static void bfin_ipi_init(void) { unsigned int cpu; - struct ipi_message_queue *msg_queue; + struct ipi_data *bfin_ipi_data; for_each_possible_cpu(cpu) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_init(&msg_queue->lock); - msg_queue->count = 0; - msg_queue->head = 0; + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + bfin_ipi_data->bits = 0; + bfin_ipi_data->count = 0; } } -static inline void smp_send_message(cpumask_t callmap, unsigned long type, - void (*func) (void *info), void *info, int wait) +void send_ipi(const struct cpumask *cpumask, enum ipi_message_type msg) { unsigned int cpu; - struct ipi_message_queue *msg_queue; - struct ipi_message *msg; - unsigned long flags, next_msg; - cpumask_t waitmask; /* waitmask is shared by all cpus */ - - cpumask_copy(&waitmask, &callmap); - for_each_cpu(cpu, &callmap) { - msg_queue = &per_cpu(ipi_msg_queue, cpu); - spin_lock_irqsave(&msg_queue->lock, flags); - if (msg_queue->count < BFIN_IPI_MSGQ_LEN) { - next_msg = (msg_queue->head + msg_queue->count) - % BFIN_IPI_MSGQ_LEN; - msg = &msg_queue->ipi_message[next_msg]; - msg->type = type; - if (type == BFIN_IPI_CALL_FUNC) { - msg->call_struct.func = func; - msg->call_struct.info = info; - msg->call_struct.wait = wait; - msg->call_struct.waitmask = &waitmask; - } - msg_queue->count++; - } else - panic("IPI message queue overflow\n"); - spin_unlock_irqrestore(&msg_queue->lock, flags); + struct ipi_data *bfin_ipi_data; + unsigned long flags; + + local_irq_save(flags); + + for_each_cpu(cpu, cpumask) { + bfin_ipi_data = &per_cpu(bfin_ipi, cpu); + smp_mb(); + set_bit(msg, &bfin_ipi_data->bits); + bfin_ipi_data->count++; platform_send_ipi_cpu(cpu, IRQ_SUPPLE_1); } - if (wait) { - while (!cpumask_empty(&waitmask)) - blackfin_dcache_invalidate_range( - (unsigned long)(&waitmask), - (unsigned long)(&waitmask)); -#ifdef __ARCH_SYNC_CORE_DCACHE - /* - * Invalidate D cache in case shared data was changed by - * other processors to ensure cache coherence. - */ - resync_core_dcache(); -#endif - } + local_irq_restore(flags); } -int smp_call_function(void (*func)(void *info), void *info, int wait) +void arch_send_call_function_single_ipi(int cpu) { - cpumask_t callmap; - - preempt_disable(); - cpumask_copy(&callmap, cpu_online_mask); - cpumask_clear_cpu(smp_processor_id(), &callmap); - if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - preempt_enable(); - - return 0; + send_ipi(cpumask_of(cpu), BFIN_IPI_CALL_FUNC_SINGLE); } -EXPORT_SYMBOL_GPL(smp_call_function); -int smp_call_function_single(int cpuid, void (*func) (void *info), void *info, - int wait) +void arch_send_call_function_ipi_mask(const struct cpumask *mask) { - unsigned int cpu = cpuid; - cpumask_t callmap; - - if (cpu_is_offline(cpu)) - return 0; - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_CALL_FUNC, func, info, wait); - - return 0; + send_ipi(mask, BFIN_IPI_CALL_FUNC); } -EXPORT_SYMBOL_GPL(smp_call_function_single); void smp_send_reschedule(int cpu) { - cpumask_t callmap; - /* simply trigger an ipi */ - - cpumask_clear(&callmap); - cpumask_set_cpu(cpu, &callmap); - - smp_send_message(callmap, BFIN_IPI_RESCHEDULE, NULL, NULL, 0); + send_ipi(cpumask_of(cpu), BFIN_IPI_RESCHEDULE); return; } void smp_send_msg(const struct cpumask *mask, unsigned long type) { - smp_send_message(*mask, type, NULL, NULL, 0); + send_ipi(mask, type); } void smp_timer_broadcast(const struct cpumask *mask) @@ -333,7 +242,7 @@ void smp_send_stop(void) cpumask_copy(&callmap, cpu_online_mask); cpumask_clear_cpu(smp_processor_id(), &callmap); if (!cpumask_empty(&callmap)) - smp_send_message(callmap, BFIN_IPI_CPU_STOP, NULL, NULL, 0); + send_ipi(&callmap, BFIN_IPI_CPU_STOP); preempt_enable(); @@ -436,7 +345,7 @@ void __init smp_prepare_boot_cpu(void) void __init smp_prepare_cpus(unsigned int max_cpus) { platform_prepare_cpus(max_cpus); - ipi_queue_init(); + bfin_ipi_init(); platform_request_ipi(IRQ_SUPPLE_0, ipi_handler_int0); platform_request_ipi(IRQ_SUPPLE_1, ipi_handler_int1); } -- cgit v0.10.2 From f39c1bfb5a03e2d255451bff05be0d7255298fa4 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Fri, 7 Sep 2012 11:08:50 -0400 Subject: SUNRPC: Fix a UDP transport regression Commit 43cedbf0e8dfb9c5610eb7985d5f21263e313802 (SUNRPC: Ensure that we grab the XPRT_LOCK before calling xprt_alloc_slot) is causing hangs in the case of NFS over UDP mounts. Since neither the UDP or the RDMA transport mechanism use dynamic slot allocation, we can skip grabbing the socket lock for those transports. Add a new rpc_xprt_op to allow switching between the TCP and UDP/RDMA case. Note that the NFSv4.1 back channel assigns the slot directly through rpc_run_bc_task, so we can ignore that case. Reported-by: Dick Streefland Signed-off-by: Trond Myklebust Cc: stable@vger.kernel.org [>= 3.1] diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index cff40aa..bf8c49f 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -114,6 +114,7 @@ struct rpc_xprt_ops { void (*set_buffer_size)(struct rpc_xprt *xprt, size_t sndsize, size_t rcvsize); int (*reserve_xprt)(struct rpc_xprt *xprt, struct rpc_task *task); void (*release_xprt)(struct rpc_xprt *xprt, struct rpc_task *task); + void (*alloc_slot)(struct rpc_xprt *xprt, struct rpc_task *task); void (*rpcbind)(struct rpc_task *task); void (*set_port)(struct rpc_xprt *xprt, unsigned short port); void (*connect)(struct rpc_task *task); @@ -281,6 +282,8 @@ void xprt_connect(struct rpc_task *task); void xprt_reserve(struct rpc_task *task); int xprt_reserve_xprt(struct rpc_xprt *xprt, struct rpc_task *task); int xprt_reserve_xprt_cong(struct rpc_xprt *xprt, struct rpc_task *task); +void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task); +void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task); int xprt_prepare_transmit(struct rpc_task *task); void xprt_transmit(struct rpc_task *task); void xprt_end_transmit(struct rpc_task *task); diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c index a5a402a..5d7f61d 100644 --- a/net/sunrpc/xprt.c +++ b/net/sunrpc/xprt.c @@ -969,11 +969,11 @@ static bool xprt_dynamic_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req) return false; } -static void xprt_alloc_slot(struct rpc_task *task) +void xprt_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task) { - struct rpc_xprt *xprt = task->tk_xprt; struct rpc_rqst *req; + spin_lock(&xprt->reserve_lock); if (!list_empty(&xprt->free)) { req = list_entry(xprt->free.next, struct rpc_rqst, rq_list); list_del(&req->rq_list); @@ -994,12 +994,29 @@ static void xprt_alloc_slot(struct rpc_task *task) default: task->tk_status = -EAGAIN; } + spin_unlock(&xprt->reserve_lock); return; out_init_req: task->tk_status = 0; task->tk_rqstp = req; xprt_request_init(task, xprt); + spin_unlock(&xprt->reserve_lock); +} +EXPORT_SYMBOL_GPL(xprt_alloc_slot); + +void xprt_lock_and_alloc_slot(struct rpc_xprt *xprt, struct rpc_task *task) +{ + /* Note: grabbing the xprt_lock_write() ensures that we throttle + * new slot allocation if the transport is congested (i.e. when + * reconnecting a stream transport or when out of socket write + * buffer space). + */ + if (xprt_lock_write(xprt, task)) { + xprt_alloc_slot(xprt, task); + xprt_release_write(xprt, task); + } } +EXPORT_SYMBOL_GPL(xprt_lock_and_alloc_slot); static void xprt_free_slot(struct rpc_xprt *xprt, struct rpc_rqst *req) { @@ -1083,20 +1100,9 @@ void xprt_reserve(struct rpc_task *task) if (task->tk_rqstp != NULL) return; - /* Note: grabbing the xprt_lock_write() here is not strictly needed, - * but ensures that we throttle new slot allocation if the transport - * is congested (e.g. if reconnecting or if we're out of socket - * write buffer space). - */ task->tk_timeout = 0; task->tk_status = -EAGAIN; - if (!xprt_lock_write(xprt, task)) - return; - - spin_lock(&xprt->reserve_lock); - xprt_alloc_slot(task); - spin_unlock(&xprt->reserve_lock); - xprt_release_write(xprt, task); + xprt->ops->alloc_slot(xprt, task); } static inline __be32 xprt_alloc_xid(struct rpc_xprt *xprt) diff --git a/net/sunrpc/xprtrdma/transport.c b/net/sunrpc/xprtrdma/transport.c index 06cdbff..5d9202d 100644 --- a/net/sunrpc/xprtrdma/transport.c +++ b/net/sunrpc/xprtrdma/transport.c @@ -713,6 +713,7 @@ static void xprt_rdma_print_stats(struct rpc_xprt *xprt, struct seq_file *seq) static struct rpc_xprt_ops xprt_rdma_procs = { .reserve_xprt = xprt_rdma_reserve_xprt, .release_xprt = xprt_release_xprt_cong, /* sunrpc/xprt.c */ + .alloc_slot = xprt_alloc_slot, .release_request = xprt_release_rqst_cong, /* ditto */ .set_retrans_timeout = xprt_set_retrans_timeout_def, /* ditto */ .rpcbind = rpcb_getport_async, /* sunrpc/rpcb_clnt.c */ diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c index 4005672..a35b8e5 100644 --- a/net/sunrpc/xprtsock.c +++ b/net/sunrpc/xprtsock.c @@ -2473,6 +2473,7 @@ static void bc_destroy(struct rpc_xprt *xprt) static struct rpc_xprt_ops xs_local_ops = { .reserve_xprt = xprt_reserve_xprt, .release_xprt = xs_tcp_release_xprt, + .alloc_slot = xprt_alloc_slot, .rpcbind = xs_local_rpcbind, .set_port = xs_local_set_port, .connect = xs_connect, @@ -2489,6 +2490,7 @@ static struct rpc_xprt_ops xs_udp_ops = { .set_buffer_size = xs_udp_set_buffer_size, .reserve_xprt = xprt_reserve_xprt_cong, .release_xprt = xprt_release_xprt_cong, + .alloc_slot = xprt_alloc_slot, .rpcbind = rpcb_getport_async, .set_port = xs_set_port, .connect = xs_connect, @@ -2506,6 +2508,7 @@ static struct rpc_xprt_ops xs_udp_ops = { static struct rpc_xprt_ops xs_tcp_ops = { .reserve_xprt = xprt_reserve_xprt, .release_xprt = xs_tcp_release_xprt, + .alloc_slot = xprt_lock_and_alloc_slot, .rpcbind = rpcb_getport_async, .set_port = xs_set_port, .connect = xs_connect, -- cgit v0.10.2 From a8edc3bf05a3465726afdf635a820761fae0d50b Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 5 Sep 2012 22:50:48 +0000 Subject: net/mlx4_core: Put Firmware flow steering structures in common header files To allow for usage of the flow steering Firmware structures in more locations over the driver, such as the resource tracker, move them from mcg.c to common header files. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index a018ea2..2673f3b 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -650,13 +650,6 @@ static int find_entry(struct mlx4_dev *dev, u8 port, return err; } -struct mlx4_net_trans_rule_hw_ctrl { - __be32 ctrl; - __be32 vf_vep_port; - __be32 qpn; - __be32 reserved; -}; - static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl, struct mlx4_net_trans_rule_hw_ctrl *hw) { @@ -680,87 +673,18 @@ static void trans_rule_ctrl_to_hw(struct mlx4_net_trans_rule *ctrl, hw->qpn = cpu_to_be32(ctrl->qpn); } -struct mlx4_net_trans_rule_hw_ib { - u8 size; - u8 rsvd1; - __be16 id; - u32 rsvd2; - __be32 qpn; - __be32 qpn_mask; - u8 dst_gid[16]; - u8 dst_gid_msk[16]; -} __packed; - -struct mlx4_net_trans_rule_hw_eth { - u8 size; - u8 rsvd; - __be16 id; - u8 rsvd1[6]; - u8 dst_mac[6]; - u16 rsvd2; - u8 dst_mac_msk[6]; - u16 rsvd3; - u8 src_mac[6]; - u16 rsvd4; - u8 src_mac_msk[6]; - u8 rsvd5; - u8 ether_type_enable; - __be16 ether_type; - __be16 vlan_id_msk; - __be16 vlan_id; -} __packed; - -struct mlx4_net_trans_rule_hw_tcp_udp { - u8 size; - u8 rsvd; - __be16 id; - __be16 rsvd1[3]; - __be16 dst_port; - __be16 rsvd2; - __be16 dst_port_msk; - __be16 rsvd3; - __be16 src_port; - __be16 rsvd4; - __be16 src_port_msk; -} __packed; - -struct mlx4_net_trans_rule_hw_ipv4 { - u8 size; - u8 rsvd; - __be16 id; - __be32 rsvd1; - __be32 dst_ip; - __be32 dst_ip_msk; - __be32 src_ip; - __be32 src_ip_msk; -} __packed; - -struct _rule_hw { - union { - struct { - u8 size; - u8 rsvd; - __be16 id; - }; - struct mlx4_net_trans_rule_hw_eth eth; - struct mlx4_net_trans_rule_hw_ib ib; - struct mlx4_net_trans_rule_hw_ipv4 ipv4; - struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp; - }; +const u16 __sw_id_hw[] = { + [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001, + [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005, + [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003, + [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002, + [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004, + [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006 }; static int parse_trans_rule(struct mlx4_dev *dev, struct mlx4_spec_list *spec, struct _rule_hw *rule_hw) { - static const u16 __sw_id_hw[] = { - [MLX4_NET_TRANS_RULE_ID_ETH] = 0xE001, - [MLX4_NET_TRANS_RULE_ID_IB] = 0xE005, - [MLX4_NET_TRANS_RULE_ID_IPV6] = 0xE003, - [MLX4_NET_TRANS_RULE_ID_IPV4] = 0xE002, - [MLX4_NET_TRANS_RULE_ID_TCP] = 0xE004, - [MLX4_NET_TRANS_RULE_ID_UDP] = 0xE006 - }; - static const size_t __rule_hw_sz[] = { [MLX4_NET_TRANS_RULE_ID_ETH] = sizeof(struct mlx4_net_trans_rule_hw_eth), diff --git a/drivers/net/ethernet/mellanox/mlx4/mlx4.h b/drivers/net/ethernet/mellanox/mlx4/mlx4.h index 4d9df8f..dba69d9 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mlx4.h +++ b/drivers/net/ethernet/mellanox/mlx4/mlx4.h @@ -690,6 +690,82 @@ struct mlx4_steer { struct list_head steer_entries[MLX4_NUM_STEERS]; }; +struct mlx4_net_trans_rule_hw_ctrl { + __be32 ctrl; + __be32 vf_vep_port; + __be32 qpn; + __be32 reserved; +}; + +struct mlx4_net_trans_rule_hw_ib { + u8 size; + u8 rsvd1; + __be16 id; + u32 rsvd2; + __be32 qpn; + __be32 qpn_mask; + u8 dst_gid[16]; + u8 dst_gid_msk[16]; +} __packed; + +struct mlx4_net_trans_rule_hw_eth { + u8 size; + u8 rsvd; + __be16 id; + u8 rsvd1[6]; + u8 dst_mac[6]; + u16 rsvd2; + u8 dst_mac_msk[6]; + u16 rsvd3; + u8 src_mac[6]; + u16 rsvd4; + u8 src_mac_msk[6]; + u8 rsvd5; + u8 ether_type_enable; + __be16 ether_type; + __be16 vlan_id_msk; + __be16 vlan_id; +} __packed; + +struct mlx4_net_trans_rule_hw_tcp_udp { + u8 size; + u8 rsvd; + __be16 id; + __be16 rsvd1[3]; + __be16 dst_port; + __be16 rsvd2; + __be16 dst_port_msk; + __be16 rsvd3; + __be16 src_port; + __be16 rsvd4; + __be16 src_port_msk; +} __packed; + +struct mlx4_net_trans_rule_hw_ipv4 { + u8 size; + u8 rsvd; + __be16 id; + __be32 rsvd1; + __be32 dst_ip; + __be32 dst_ip_msk; + __be32 src_ip; + __be32 src_ip_msk; +} __packed; + +struct _rule_hw { + union { + struct { + u8 size; + u8 rsvd; + __be16 id; + }; + struct mlx4_net_trans_rule_hw_eth eth; + struct mlx4_net_trans_rule_hw_ib ib; + struct mlx4_net_trans_rule_hw_ipv4 ipv4; + struct mlx4_net_trans_rule_hw_tcp_udp tcp_udp; + }; +}; + struct mlx4_priv { struct mlx4_dev dev; diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index bd6c9fc..244ba90 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -796,6 +796,8 @@ enum mlx4_net_trans_rule_id { MLX4_NET_TRANS_RULE_NUM, /* should be last */ }; +extern const u16 __sw_id_hw[]; + enum mlx4_net_trans_promisc_mode { MLX4_FS_PROMISC_NONE = 0, MLX4_FS_PROMISC_UPLINK, -- cgit v0.10.2 From 7fb40f87c4195ec1728527f30bc744c47a45b366 Mon Sep 17 00:00:00 2001 From: Hadar Hen Zion Date: Wed, 5 Sep 2012 22:50:49 +0000 Subject: net/mlx4_core: Add security check / enforcement for flow steering rules set for VMs Since VFs may be mapped to VMs which aren't trusted entities, flow steering rules attached through the wrapper on behalf of VFs must be checked to make sure that their L2 specification relate to MAC address assigned to that VF, and add L2 specification if its missing. Signed-off-by: Hadar Hen Zion Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c index 94ceddd..293c9e8 100644 --- a/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c +++ b/drivers/net/ethernet/mellanox/mlx4/resource_tracker.c @@ -42,6 +42,7 @@ #include #include #include +#include #include "mlx4.h" #include "fw.h" @@ -2776,18 +2777,133 @@ ex_put: return err; } +/* + * MAC validation for Flow Steering rules. + * VF can attach rules only with a mac address which is assigned to it. + */ +static int validate_eth_header_mac(int slave, struct _rule_hw *eth_header, + struct list_head *rlist) +{ + struct mac_res *res, *tmp; + __be64 be_mac; + + /* make sure it isn't multicast or broadcast mac*/ + if (!is_multicast_ether_addr(eth_header->eth.dst_mac) && + !is_broadcast_ether_addr(eth_header->eth.dst_mac)) { + list_for_each_entry_safe(res, tmp, rlist, list) { + be_mac = cpu_to_be64(res->mac << 16); + if (!memcmp(&be_mac, eth_header->eth.dst_mac, ETH_ALEN)) + return 0; + } + pr_err("MAC %pM doesn't belong to VF %d, Steering rule rejected\n", + eth_header->eth.dst_mac, slave); + return -EINVAL; + } + return 0; +} + +/* + * In case of missing eth header, append eth header with a MAC address + * assigned to the VF. + */ +static int add_eth_header(struct mlx4_dev *dev, int slave, + struct mlx4_cmd_mailbox *inbox, + struct list_head *rlist, int header_id) +{ + struct mac_res *res, *tmp; + u8 port; + struct mlx4_net_trans_rule_hw_ctrl *ctrl; + struct mlx4_net_trans_rule_hw_eth *eth_header; + struct mlx4_net_trans_rule_hw_ipv4 *ip_header; + struct mlx4_net_trans_rule_hw_tcp_udp *l4_header; + __be64 be_mac = 0; + __be64 mac_msk = cpu_to_be64(MLX4_MAC_MASK << 16); + + ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf; + port = be32_to_cpu(ctrl->vf_vep_port) & 0xff; + eth_header = (struct mlx4_net_trans_rule_hw_eth *)(ctrl + 1); + + /* Clear a space in the inbox for eth header */ + switch (header_id) { + case MLX4_NET_TRANS_RULE_ID_IPV4: + ip_header = + (struct mlx4_net_trans_rule_hw_ipv4 *)(eth_header + 1); + memmove(ip_header, eth_header, + sizeof(*ip_header) + sizeof(*l4_header)); + break; + case MLX4_NET_TRANS_RULE_ID_TCP: + case MLX4_NET_TRANS_RULE_ID_UDP: + l4_header = (struct mlx4_net_trans_rule_hw_tcp_udp *) + (eth_header + 1); + memmove(l4_header, eth_header, sizeof(*l4_header)); + break; + default: + return -EINVAL; + } + list_for_each_entry_safe(res, tmp, rlist, list) { + if (port == res->port) { + be_mac = cpu_to_be64(res->mac << 16); + break; + } + } + if (!be_mac) { + pr_err("Failed adding eth header to FS rule, Can't find matching MAC for port %d .\n", + port); + return -EINVAL; + } + + memset(eth_header, 0, sizeof(*eth_header)); + eth_header->size = sizeof(*eth_header) >> 2; + eth_header->id = cpu_to_be16(__sw_id_hw[MLX4_NET_TRANS_RULE_ID_ETH]); + memcpy(eth_header->dst_mac, &be_mac, ETH_ALEN); + memcpy(eth_header->dst_mac_msk, &mac_msk, ETH_ALEN); + + return 0; + +} + int mlx4_QP_FLOW_STEERING_ATTACH_wrapper(struct mlx4_dev *dev, int slave, struct mlx4_vhcr *vhcr, struct mlx4_cmd_mailbox *inbox, struct mlx4_cmd_mailbox *outbox, struct mlx4_cmd_info *cmd) { + + struct mlx4_priv *priv = mlx4_priv(dev); + struct mlx4_resource_tracker *tracker = &priv->mfunc.master.res_tracker; + struct list_head *rlist = &tracker->slave_list[slave].res_list[RES_MAC]; int err; + struct mlx4_net_trans_rule_hw_ctrl *ctrl; + struct _rule_hw *rule_header; + int header_id; if (dev->caps.steering_mode != MLX4_STEERING_MODE_DEVICE_MANAGED) return -EOPNOTSUPP; + ctrl = (struct mlx4_net_trans_rule_hw_ctrl *)inbox->buf; + rule_header = (struct _rule_hw *)(ctrl + 1); + header_id = map_hw_to_sw_id(be16_to_cpu(rule_header->id)); + + switch (header_id) { + case MLX4_NET_TRANS_RULE_ID_ETH: + if (validate_eth_header_mac(slave, rule_header, rlist)) + return -EINVAL; + break; + case MLX4_NET_TRANS_RULE_ID_IPV4: + case MLX4_NET_TRANS_RULE_ID_TCP: + case MLX4_NET_TRANS_RULE_ID_UDP: + pr_warn("Can't attach FS rule without L2 headers, adding L2 header.\n"); + if (add_eth_header(dev, slave, inbox, rlist, header_id)) + return -EINVAL; + vhcr->in_modifier += + sizeof(struct mlx4_net_trans_rule_hw_eth) >> 2; + break; + default: + pr_err("Corrupted mailbox.\n"); + return -EINVAL; + } + err = mlx4_cmd_imm(dev, inbox->dma, &vhcr->out_param, vhcr->in_modifier, 0, MLX4_QP_FLOW_STEERING_ATTACH, MLX4_CMD_TIME_CLASS_A, diff --git a/include/linux/mlx4/device.h b/include/linux/mlx4/device.h index 244ba90..6e1b0f9 100644 --- a/include/linux/mlx4/device.h +++ b/include/linux/mlx4/device.h @@ -798,6 +798,17 @@ enum mlx4_net_trans_rule_id { extern const u16 __sw_id_hw[]; +static inline int map_hw_to_sw_id(u16 header_id) +{ + + int i; + for (i = 0; i < MLX4_NET_TRANS_RULE_NUM; i++) { + if (header_id == __sw_id_hw[i]) + return i; + } + return -EINVAL; +} + enum mlx4_net_trans_promisc_mode { MLX4_FS_PROMISC_NONE = 0, MLX4_FS_PROMISC_UPLINK, -- cgit v0.10.2 From 60d31c1475f20b6966f7efbd646b1123d0fba5b1 Mon Sep 17 00:00:00 2001 From: Aviad Yehezkel Date: Wed, 5 Sep 2012 22:50:50 +0000 Subject: net/mlx4_core: Looking for promiscuous entries on the correct port The search for promisc entries was always done on the first port, While the addition is done on the correct port. This lead to resource leackage of promisc entries on the second port and brought to a state where we could no longer enter to promiscuous mode after enough iterations of "ifconfig promisc" on the second port. Fix that by using the correct port when searching. Reported-by: Marcelo Ricardo Leitner Signed-off-by: Aviad Yehezkel Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/mcg.c b/drivers/net/ethernet/mellanox/mlx4/mcg.c index 2673f3b..e151c21 100644 --- a/drivers/net/ethernet/mellanox/mlx4/mcg.c +++ b/drivers/net/ethernet/mellanox/mlx4/mcg.c @@ -137,11 +137,11 @@ static int mlx4_GID_HASH(struct mlx4_dev *dev, struct mlx4_cmd_mailbox *mailbox, return err; } -static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 pf_num, +static struct mlx4_promisc_qp *get_promisc_qp(struct mlx4_dev *dev, u8 port, enum mlx4_steer_type steer, u32 qpn) { - struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[pf_num]; + struct mlx4_steer *s_steer = &mlx4_priv(dev)->steer[port - 1]; struct mlx4_promisc_qp *pqp; list_for_each_entry(pqp, &s_steer->promisc_qps[steer], list) { @@ -182,7 +182,7 @@ static int new_steering_entry(struct mlx4_dev *dev, u8 port, /* If the given qpn is also a promisc qp, * it should be inserted to duplicates list */ - pqp = get_promisc_qp(dev, 0, steer, qpn); + pqp = get_promisc_qp(dev, port, steer, qpn); if (pqp) { dqp = kmalloc(sizeof *dqp, GFP_KERNEL); if (!dqp) { @@ -256,7 +256,7 @@ static int existing_steering_entry(struct mlx4_dev *dev, u8 port, s_steer = &mlx4_priv(dev)->steer[port - 1]; - pqp = get_promisc_qp(dev, 0, steer, qpn); + pqp = get_promisc_qp(dev, port, steer, qpn); if (!pqp) return 0; /* nothing to do */ @@ -302,7 +302,7 @@ static bool check_duplicate_entry(struct mlx4_dev *dev, u8 port, s_steer = &mlx4_priv(dev)->steer[port - 1]; /* if qp is not promisc, it cannot be duplicated */ - if (!get_promisc_qp(dev, 0, steer, qpn)) + if (!get_promisc_qp(dev, port, steer, qpn)) return false; /* The qp is promisc qp so it is a duplicate on this index @@ -352,7 +352,7 @@ static bool can_remove_steering_entry(struct mlx4_dev *dev, u8 port, members_count = be32_to_cpu(mgm->members_count) & 0xffffff; for (i = 0; i < members_count; i++) { qpn = be32_to_cpu(mgm->qp[i]) & MGM_QPN_MASK; - if (!get_promisc_qp(dev, 0, steer, qpn) && qpn != tqpn) { + if (!get_promisc_qp(dev, port, steer, qpn) && qpn != tqpn) { /* the qp is not promisc, the entry can't be removed */ goto out; } @@ -398,7 +398,7 @@ static int add_promisc_qp(struct mlx4_dev *dev, u8 port, mutex_lock(&priv->mcg_table.mutex); - if (get_promisc_qp(dev, 0, steer, qpn)) { + if (get_promisc_qp(dev, port, steer, qpn)) { err = 0; /* Noting to do, already exists */ goto out_mutex; } @@ -503,7 +503,7 @@ static int remove_promisc_qp(struct mlx4_dev *dev, u8 port, s_steer = &mlx4_priv(dev)->steer[port - 1]; mutex_lock(&priv->mcg_table.mutex); - pqp = get_promisc_qp(dev, 0, steer, qpn); + pqp = get_promisc_qp(dev, port, steer, qpn); if (unlikely(!pqp)) { mlx4_warn(dev, "QP %x is not promiscuous QP\n", qpn); /* nothing to do */ -- cgit v0.10.2 From bef772eb06051f49e84c3168f189b65074f19c3d Mon Sep 17 00:00:00 2001 From: Aviad Yehezkel Date: Wed, 5 Sep 2012 22:50:51 +0000 Subject: net/mlx4_core: Fixing error flow in case of QUERY_FW failure The order of operations was wrong on the teardown flow. Signed-off-by: Aviad Yehezkel Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 827b72d..0fadac5 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1234,13 +1234,13 @@ static int mlx4_init_hca(struct mlx4_dev *dev) mlx4_info(dev, "non-primary physical function, skipping.\n"); else mlx4_err(dev, "QUERY_FW command failed, aborting.\n"); - goto unmap_bf; + return err; } err = mlx4_load_fw(dev); if (err) { mlx4_err(dev, "Failed to start FW, aborting.\n"); - goto unmap_bf; + return err; } mlx4_cfg.log_pg_sz_m = 1; @@ -1304,7 +1304,7 @@ static int mlx4_init_hca(struct mlx4_dev *dev) err = mlx4_init_slave(dev); if (err) { mlx4_err(dev, "Failed to initialize slave\n"); - goto unmap_bf; + return err; } err = mlx4_slave_cap(dev); @@ -1324,7 +1324,7 @@ static int mlx4_init_hca(struct mlx4_dev *dev) err = mlx4_QUERY_ADAPTER(dev, &adapter); if (err) { mlx4_err(dev, "QUERY_ADAPTER command failed, aborting.\n"); - goto err_close; + goto unmap_bf; } priv->eq_table.inta_pin = adapter.inta_pin; @@ -1332,6 +1332,9 @@ static int mlx4_init_hca(struct mlx4_dev *dev) return 0; +unmap_bf: + unmap_bf_area(dev); + err_close: mlx4_close_hca(dev); @@ -1344,8 +1347,6 @@ err_stop_fw: mlx4_UNMAP_FA(dev); mlx4_free_icm(dev, priv->fw.fw_icm, 0); } -unmap_bf: - unmap_bf_area(dev); return err; } -- cgit v0.10.2 From 521130d11fd37b328543477df5522704a0e7cf2c Mon Sep 17 00:00:00 2001 From: Eugenia Emantayev Date: Wed, 5 Sep 2012 22:50:52 +0000 Subject: net/mlx4_core: Return the error value in case of command initialization failure If mlx4_cmd_init() failed, the init_one function returned success, although no resources were opened. Signed-off-by: Eugenia Emantayev Signed-off-by: Yevgeny Petrilin Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/main.c b/drivers/net/ethernet/mellanox/mlx4/main.c index 0fadac5..2f816c6 100644 --- a/drivers/net/ethernet/mellanox/mlx4/main.c +++ b/drivers/net/ethernet/mellanox/mlx4/main.c @@ -1997,7 +1997,8 @@ static int __mlx4_init_one(struct pci_dev *pdev, const struct pci_device_id *id) } slave_start: - if (mlx4_cmd_init(dev)) { + err = mlx4_cmd_init(dev); + if (err) { mlx4_err(dev, "Failed to init command interface, aborting.\n"); goto err_sriov; } -- cgit v0.10.2 From 979402b16cde048ced4839e21cc49e0779352b80 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Wed, 5 Sep 2012 23:34:44 +0000 Subject: udp: increment UDP_MIB_INERRORS if copy failed In UDP recvmsg(), we miss an increase of UDP_MIB_INERRORS if the copy of skb to userspace failed for whatever reason. Reported-by: Shawn Bohrer Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index 6f6d1ac..2814f66 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -1226,6 +1226,11 @@ try_again: if (unlikely(err)) { trace_kfree_skb(skb, udp_recvmsg); + if (!peeked) { + atomic_inc(&sk->sk_drops); + UDP_INC_STATS_USER(sock_net(sk), + UDP_MIB_INERRORS, is_udplite); + } goto out_free; } diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 99d0077..07e2bfe 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -394,6 +394,17 @@ try_again: } if (unlikely(err)) { trace_kfree_skb(skb, udpv6_recvmsg); + if (!peeked) { + atomic_inc(&sk->sk_drops); + if (is_udp4) + UDP_INC_STATS_USER(sock_net(sk), + UDP_MIB_INERRORS, + is_udplite); + else + UDP6_INC_STATS_USER(sock_net(sk), + UDP_MIB_INERRORS, + is_udplite); + } goto out_free; } if (!peeked) { -- cgit v0.10.2 From b8dfc6a0a7235aed452c0e376b6feff182a86992 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 6 Sep 2012 00:47:05 +0000 Subject: |PATCH] seeq: Add missing spinlock init It doesn't seem this spinlock was properly initialized. Signed-off-by: Jean Delvare Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/seeq/sgiseeq.c b/drivers/net/ethernet/seeq/sgiseeq.c index bb8c822..4d15bf4 100644 --- a/drivers/net/ethernet/seeq/sgiseeq.c +++ b/drivers/net/ethernet/seeq/sgiseeq.c @@ -751,6 +751,7 @@ static int __devinit sgiseeq_probe(struct platform_device *pdev) sp->srings = sr; sp->rx_desc = sp->srings->rxvector; sp->tx_desc = sp->srings->txvector; + spin_lock_init(&sp->tx_lock); /* A couple calculations now, saves many cycles later. */ setup_rx_ring(dev, sp->rx_desc, SEEQ_RX_BUFFERS); -- cgit v0.10.2 From 306c11b28d7bb85a7adda741798a2b6b60dd305a Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:32 +0200 Subject: target: go through normal processing for zero-length PSCSI commands Right now, commands with a zero-size payload are skipped completely. This is wrong; such commands should be passed down to the device and processed normally. For physical backends, this ignores completely things such as START STOP UNIT. For virtual backends, we have a hack in place to clear a unit attention state on a zero-size REQUEST SENSE, but we still do not report errors properly on zero-length commands---out-of-bounds 0-block reads and writes, too small parameter list lengths, etc. This patch fixes this for PSCSI. Uses of transport_kmap_data_sg are guarded with a check for non-zero cmd->data_length; for all other commands a zero length is handled properly in pscsi_execute_cmd. The sole exception will be for now REPORT LUNS, which is handled through the normal SPC emulation. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_pscsi.c b/drivers/target/target_core_pscsi.c index 5f7151d..9d7ce3d 100644 --- a/drivers/target/target_core_pscsi.c +++ b/drivers/target/target_core_pscsi.c @@ -688,11 +688,11 @@ static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg, * Hack to make sure that Write-Protect modepage is set if R/O mode is * forced. */ + if (!cmd->se_deve || !cmd->data_length) + goto after_mode_sense; + if (((cdb[0] == MODE_SENSE) || (cdb[0] == MODE_SENSE_10)) && (status_byte(result) << 1) == SAM_STAT_GOOD) { - if (!cmd->se_deve) - goto after_mode_sense; - if (cmd->se_deve->lun_flags & TRANSPORT_LUNFLAGS_READ_ONLY) { unsigned char *buf = transport_kmap_data_sg(cmd); @@ -709,7 +709,7 @@ static void pscsi_transport_complete(struct se_cmd *cmd, struct scatterlist *sg, } after_mode_sense: - if (sd->type != TYPE_TAPE) + if (sd->type != TYPE_TAPE || !cmd->data_length) goto after_mode_select; /* diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 8a29e3f..7ddb0c3 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2300,7 +2300,9 @@ int transport_generic_new_cmd(struct se_cmd *cmd) * into the fabric for data transfers, go ahead and complete it right * away. */ - if (!cmd->data_length) { + if (!cmd->data_length && + (cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV || + cmd->t_task_cdb[0] == REPORT_LUNS) { spin_lock_irq(&cmd->t_state_lock); cmd->t_state = TRANSPORT_COMPLETE; cmd->transport_state |= CMD_T_ACTIVE; -- cgit v0.10.2 From 0d7f1299ca5540b9a63ab6e8bf0e89ea963eb6af Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:33 +0200 Subject: target: report too-small parameter lists everywhere Several places were not checking that the parameter list length was large enough, and thus accessing invalid memory. Zero-length parameter lists are just a special case of this. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_alua.c b/drivers/target/target_core_alua.c index 9179997..41641ba 100644 --- a/drivers/target/target_core_alua.c +++ b/drivers/target/target_core_alua.c @@ -218,6 +218,13 @@ int target_emulate_set_target_port_groups(struct se_cmd *cmd) cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return -EINVAL; } + if (cmd->data_length < 4) { + pr_warn("SET TARGET PORT GROUPS parameter list length %u too" + " small\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; + } + buf = transport_kmap_data_sg(cmd); /* diff --git a/drivers/target/target_core_iblock.c b/drivers/target/target_core_iblock.c index 76db75e..9ba4954 100644 --- a/drivers/target/target_core_iblock.c +++ b/drivers/target/target_core_iblock.c @@ -325,17 +325,30 @@ static int iblock_execute_unmap(struct se_cmd *cmd) struct iblock_dev *ibd = dev->dev_ptr; unsigned char *buf, *ptr = NULL; sector_t lba; - int size = cmd->data_length; + int size; u32 range; int ret = 0; int dl, bd_dl; + if (cmd->data_length < 8) { + pr_warn("UNMAP parameter list length %u too small\n", + cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + return -EINVAL; + } + buf = transport_kmap_data_sg(cmd); dl = get_unaligned_be16(&buf[0]); bd_dl = get_unaligned_be16(&buf[2]); - size = min(size - 8, bd_dl); + size = cmd->data_length - 8; + if (bd_dl > size) + pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n", + cmd->data_length, bd_dl); + else + size = bd_dl; + if (size / 16 > dev->se_sub_dev->se_dev_attrib.max_unmap_block_desc_count) { cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; ret = -EINVAL; diff --git a/drivers/target/target_core_pr.c b/drivers/target/target_core_pr.c index 1e94650..956c84c 100644 --- a/drivers/target/target_core_pr.c +++ b/drivers/target/target_core_pr.c @@ -1540,6 +1540,14 @@ static int core_scsi3_decode_spec_i_port( tidh_new->dest_local_nexus = 1; list_add_tail(&tidh_new->dest_list, &tid_dest_list); + if (cmd->data_length < 28) { + pr_warn("SPC-PR: Received PR OUT parameter list" + " length too small: %u\n", cmd->data_length); + cmd->scsi_sense_reason = TCM_INVALID_PARAMETER_LIST; + ret = -EINVAL; + goto out; + } + buf = transport_kmap_data_sg(cmd); /* * For a PERSISTENT RESERVE OUT specify initiator ports payload, -- cgit v0.10.2 From 9b16b9edb4fd0dc86ee0fbe1f7ede580e26e85f4 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:34 +0200 Subject: target: fail REPORT LUNS with less than 16 bytes of payload SPC says: "The ALLOCATION LENGTH field is defined in 4.3.5.6. The allocation length should be at least 16. Device servers compliant with SPC return CHECK CONDITION status, with the sense key set to ILLEGAL REQUEST, and the additional sense code set to INVALID FIELD IN CDB when the allocation length is less than 16 bytes". Testcase: sg_raw -r8 /dev/sdb a0 00 00 00 00 00 00 00 00 08 00 00 should fail with ILLEGAL REQUEST / INVALID FIELD IN CDB sense does not fail without the patch fails correctly with the patch Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index cf2c66f..9fc9a60 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -669,6 +669,13 @@ int target_report_luns(struct se_cmd *se_cmd) unsigned char *buf; u32 lun_count = 0, offset = 8, i; + if (se_cmd->data_length < 16) { + pr_warn("REPORT LUNS allocation length %u too small\n", + se_cmd->data_length); + se_cmd->scsi_sense_reason = TCM_INVALID_CDB_FIELD; + return -EINVAL; + } + buf = transport_kmap_data_sg(se_cmd); if (!buf) return -ENOMEM; -- cgit v0.10.2 From 3717ef0c63e90686d959158e9728a13a49229be6 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:35 +0200 Subject: target: support zero-size allocation lengths in transport_kmap_data_sg In order to support zero-size allocation lengths, do not assert that we have a scatterlist until after checking cmd->data_length. But once we do this, we can have two cases of transport_kmap_data_sg returning NULL: a zero-size allocation length, or an out-of-memory condition. Report the latter using sense codes, so that the SCSI command that triggered it will fail. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 7ddb0c3..4403477 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2190,7 +2190,6 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) struct page **pages; int i; - BUG_ON(!sg); /* * We need to take into account a possible offset here for fabrics like * tcm_loop who may be using a contig buffer from the SCSI midlayer for @@ -2198,13 +2197,17 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) */ if (!cmd->t_data_nents) return NULL; - else if (cmd->t_data_nents == 1) + + BUG_ON(!sg); + if (cmd->t_data_nents == 1) return kmap(sg_page(sg)) + sg->offset; /* >1 page. use vmap */ pages = kmalloc(sizeof(*pages) * cmd->t_data_nents, GFP_KERNEL); - if (!pages) + if (!pages) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return NULL; + } /* convert sg[] to pages[] */ for_each_sg(cmd->t_data_sg, sg, cmd->t_data_nents, i) { @@ -2213,8 +2216,10 @@ void *transport_kmap_data_sg(struct se_cmd *cmd) cmd->t_data_vmap = vmap(pages, cmd->t_data_nents, VM_MAP, PAGE_KERNEL); kfree(pages); - if (!cmd->t_data_vmap) + if (!cmd->t_data_vmap) { + cmd->scsi_sense_reason = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE; return NULL; + } return cmd->t_data_vmap + cmd->t_data_sg[0].offset; } -- cgit v0.10.2 From 32a8811ff164f882712c17946e58e52444f464a7 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:36 +0200 Subject: target: support zero allocation length in REQUEST SENSE Similar to INQUIRY and MODE SENSE, construct the sense data in a buffer and later copy it to the scatterlist. Do not do anything, but still clear a pending unit attention condition, if the allocation length is zero. However, SPC tells us that "If a REQUEST SENSE command is terminated with CHECK CONDITION status [and] the REQUEST SENSE command was received on an I_T nexus with a pending unit attention condition (i.e., before the device server reports CHECK CONDITION status), then the device server shall not clear the pending unit attention condition." Do the transport_kmap_data_sg early to detect this case. It also tells us "Device servers shall not adjust the additional sense length to reflect truncation if the allocation length is less than the sense data available", so do not do that! Note that the err variable is write-only. Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_spc.c b/drivers/target/target_core_spc.c index 4c861de..388a922 100644 --- a/drivers/target/target_core_spc.c +++ b/drivers/target/target_core_spc.c @@ -877,9 +877,11 @@ static int spc_emulate_modesense(struct se_cmd *cmd) static int spc_emulate_request_sense(struct se_cmd *cmd) { unsigned char *cdb = cmd->t_task_cdb; - unsigned char *buf; + unsigned char *rbuf; u8 ua_asc = 0, ua_ascq = 0; - int err = 0; + unsigned char buf[SE_SENSE_BUF]; + + memset(buf, 0, SE_SENSE_BUF); if (cdb[1] & 0x01) { pr_err("REQUEST_SENSE description emulation not" @@ -888,20 +890,21 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) return -ENOSYS; } - buf = transport_kmap_data_sg(cmd); - - if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { + rbuf = transport_kmap_data_sg(cmd); + if (cmd->scsi_sense_reason != 0) { + /* + * Out of memory. We will fail with CHECK CONDITION, so + * we must not clear the unit attention condition. + */ + target_complete_cmd(cmd, CHECK_CONDITION); + return 0; + } else if (!core_scsi3_ua_clear_for_request_sense(cmd, &ua_asc, &ua_ascq)) { /* * CURRENT ERROR, UNIT ATTENTION */ buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = UNIT_ATTENTION; - if (cmd->data_length < 18) { - buf[7] = 0x00; - err = -EINVAL; - goto end; - } /* * The Additional Sense Code (ASC) from the UNIT ATTENTION */ @@ -915,11 +918,6 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) buf[0] = 0x70; buf[SPC_SENSE_KEY_OFFSET] = NO_SENSE; - if (cmd->data_length < 18) { - buf[7] = 0x00; - err = -EINVAL; - goto end; - } /* * NO ADDITIONAL SENSE INFORMATION */ @@ -927,8 +925,11 @@ static int spc_emulate_request_sense(struct se_cmd *cmd) buf[7] = 0x0A; } -end: - transport_kunmap_data_sg(cmd); + if (rbuf) { + memcpy(rbuf, buf, min_t(u32, sizeof(buf), cmd->data_length)); + transport_kunmap_data_sg(cmd); + } + target_complete_cmd(cmd, GOOD); return 0; } diff --git a/include/target/target_core_base.h b/include/target/target_core_base.h index 015cea0..5be8937 100644 --- a/include/target/target_core_base.h +++ b/include/target/target_core_base.h @@ -121,6 +121,7 @@ #define SE_INQUIRY_BUF 512 #define SE_MODE_PAGE_BUF 512 +#define SE_SENSE_BUF 96 /* struct se_hba->hba_flags */ enum hba_flags_table { -- cgit v0.10.2 From 6abbdf38363f064c8a50150c9b709682764483b3 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Fri, 7 Sep 2012 17:30:37 +0200 Subject: target: go through normal processing for zero-length REQUEST_SENSE Now that spc_emulate_request_sense has been taught to process zero-length REQUEST SENSE correctly, drop the special handling of unit attention conditions from transport_generic_new_cmd. However, for now REQUEST SENSE will be the only command that goes through emulation for zero lengths. (nab: Fix up zero-length check in transport_generic_new_cmd) Signed-off-by: Paolo Bonzini Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 4403477..269f544 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -2306,20 +2306,13 @@ int transport_generic_new_cmd(struct se_cmd *cmd) * away. */ if (!cmd->data_length && - (cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV || - cmd->t_task_cdb[0] == REPORT_LUNS) { + cmd->t_task_cdb[0] != REQUEST_SENSE && + cmd->se_dev->transport->transport_type != TRANSPORT_PLUGIN_PHBA_PDEV) { spin_lock_irq(&cmd->t_state_lock); cmd->t_state = TRANSPORT_COMPLETE; cmd->transport_state |= CMD_T_ACTIVE; spin_unlock_irq(&cmd->t_state_lock); - if (cmd->t_task_cdb[0] == REQUEST_SENSE) { - u8 ua_asc = 0, ua_ascq = 0; - - core_scsi3_ua_clear_for_request_sense(cmd, - &ua_asc, &ua_ascq); - } - INIT_WORK(&cmd->work, target_complete_ok_work); queue_work(target_completion_wq, &cmd->work); return 0; -- cgit v0.10.2 From b4ad51559c2f12c34a0340b26ffb02e4b285bc51 Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Tue, 4 Sep 2012 20:04:35 +0100 Subject: ARM: 7512/1: Fix XIP build due to PHYS_OFFSET definition moving During the p2v changes, the PHYS_OFFSET #define moved into a !__ASSEMBLY__ section. This causes a XIP build to fail with arch/arm/kernel/head.o: In function 'stext': arch/arm/kernel/head.S:146: undefined reference to 'PHYS_OFFSET' Momentarily leave the #ifndef __ASSEMBLY__ section so we can define PHYS_OFFSET for all compilation units. Signed-off-by: Stephen Boyd Signed-off-by: Russell King diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index e965f1b..5f6ddcc 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -187,6 +187,7 @@ static inline unsigned long __phys_to_virt(unsigned long x) #define __phys_to_virt(x) ((x) - PHYS_OFFSET + PAGE_OFFSET) #endif #endif +#endif /* __ASSEMBLY__ */ #ifndef PHYS_OFFSET #ifdef PLAT_PHYS_OFFSET @@ -196,6 +197,8 @@ static inline unsigned long __phys_to_virt(unsigned long x) #endif #endif +#ifndef __ASSEMBLY__ + /* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. -- cgit v0.10.2 From 70b0476a2394de4f4e32e0b67288d80ff71ca963 Mon Sep 17 00:00:00 2001 From: David Brown Date: Tue, 4 Sep 2012 21:36:37 +0100 Subject: ARM: 7513/1: Make sure dtc is built before running it 'make dtbs' in a clean tree will try running the dtc before actually building it. Make these rules depend upon the scripts to build it. Cc: Signed-off-by: David Brown Signed-off-by: Russell King diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 30eae87..a051dfb 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -284,10 +284,10 @@ zImage Image xipImage bootpImage uImage: vmlinux zinstall uinstall install: vmlinux $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@ -%.dtb: +%.dtb: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ -dtbs: +dtbs: scripts $(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $(boot)/$@ # We use MRPROPER_FILES and CLEAN_FILES now -- cgit v0.10.2 From 62194bdab89b30f451d210247d09e1c146e6d0ad Mon Sep 17 00:00:00 2001 From: Stephen Boyd Date: Thu, 6 Sep 2012 21:24:32 +0100 Subject: ARM: 7521/1: Fix semihosting Kconfig text It seems we were missing some text in the title for the semihosting DEBUG_LL option. Add in the "/O" and fix up some minor typos in the help text. Signed-off-by: Stephen Boyd Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index f15f82b..e968a52 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -356,15 +356,15 @@ choice is nothing connected to read from the DCC. config DEBUG_SEMIHOSTING - bool "Kernel low-level debug output via semihosting I" + bool "Kernel low-level debug output via semihosting I/O" help Semihosting enables code running on an ARM target to use the I/O facilities on a host debugger/emulator through a - simple SVC calls. The host debugger or emulator must have + simple SVC call. The host debugger or emulator must have semihosting enabled for the special svc call to be trapped otherwise the kernel will crash. - This is known to work with OpenOCD, as wellas + This is known to work with OpenOCD, as well as ARM's Fast Models, or any other controlling environment that implements semihosting. -- cgit v0.10.2 From 2b2040af0b64cd93e5d4df2494c4486cf604090d Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:21:44 +0100 Subject: ARM: 7526/1: traps: send SIGILL if get_user fails on undef handling path get_user may fail to load from the provided __user address due to an unhandled fault generated by the access. In the case of the undefined instruction trap, this results in failure to load the faulting instruction, in which case we should send SIGILL to the task rather than continue with potentially uninitialised data. Signed-off-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Russell King diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index f794521..b0179b8 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -420,20 +420,23 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) #endif instr = *(u32 *) pc; } else if (thumb_mode(regs)) { - get_user(instr, (u16 __user *)pc); + if (get_user(instr, (u16 __user *)pc)) + goto die_sig; if (is_wide_instruction(instr)) { unsigned int instr2; - get_user(instr2, (u16 __user *)pc+1); + if (get_user(instr2, (u16 __user *)pc+1)) + goto die_sig; instr <<= 16; instr |= instr2; } - } else { - get_user(instr, (u32 __user *)pc); + } else if (get_user(instr, (u32 __user *)pc)) { + goto die_sig; } if (call_undef_hook(regs, instr) == 0) return; +die_sig: #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { printk(KERN_INFO "%s (%d): undefined instruction: pc=%p\n", -- cgit v0.10.2 From 92dd6c3d4d4e0a26c9bb987b3f2f08c1da86d9ce Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Fri, 7 Sep 2012 06:51:23 +0000 Subject: RDMA/cxgb4: Move dereference below NULL test spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Acked-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/cxgb4/cm.c b/drivers/infiniband/hw/cxgb4/cm.c index 51f4206..6cfd4d8 100644 --- a/drivers/infiniband/hw/cxgb4/cm.c +++ b/drivers/infiniband/hw/cxgb4/cm.c @@ -1361,11 +1361,11 @@ static int abort_rpl(struct c4iw_dev *dev, struct sk_buff *skb) struct tid_info *t = dev->rdev.lldi.tids; ep = lookup_tid(t, tid); - PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); if (!ep) { printk(KERN_WARNING MOD "Abort rpl to freed endpoint\n"); return 0; } + PDBG("%s ep %p tid %u\n", __func__, ep, ep->hwtid); mutex_lock(&ep->com.mutex); switch (ep->com.state) { case ABORTING: -- cgit v0.10.2 From 99d0b1db6ccd0c0e554398e8a579ff3dd4d119ee Mon Sep 17 00:00:00 2001 From: Alexander Shishkin Date: Fri, 31 Aug 2012 15:50:55 +0300 Subject: drm/i915: initialize dpio_lock spin lock This thing is killing lockdep. Signed-off-by: Alexander Shishkin [Jani: move the init next to the other spin lock inits] Signed-off-by: Jani Nikula Acked-by: Ben Widawsky Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index 9cf7dfe..914c0df 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1587,6 +1587,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) spin_lock_init(&dev_priv->irq_lock); spin_lock_init(&dev_priv->error_lock); spin_lock_init(&dev_priv->rps_lock); + spin_lock_init(&dev_priv->dpio_lock); if (IS_IVYBRIDGE(dev) || IS_HASWELL(dev)) dev_priv->num_pipe = 3; -- cgit v0.10.2 From 6862234238e84648c305526af2edd98badcad1e0 Mon Sep 17 00:00:00 2001 From: Chema Gonzalez Date: Fri, 7 Sep 2012 13:40:50 +0000 Subject: net: small bug on rxhash calculation In the current rxhash calculation function, while the sorting of the ports/addrs is coherent (you get the same rxhash for packets sharing the same 4-tuple, in both directions), ports and addrs are sorted independently. This implies packets from a connection between the same addresses but crossed ports hash to the same rxhash. For example, traffic between A=S:l and B=L:s is hashed (in both directions) from {L, S, {s, l}}. The same rxhash is obtained for packets between C=S:s and D=L:l. This patch ensures that you either swap both addrs and ports, or you swap none. Traffic between A and B, and traffic between C and D, get their rxhash from different sources ({L, S, {l, s}} for A<->B, and {L, S, {s, l}} for C<->D) The patch is co-written with Eric Dumazet Signed-off-by: Chema Gonzalez Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 8398836..d7fe32c 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2647,15 +2647,16 @@ void __skb_get_rxhash(struct sk_buff *skb) if (!skb_flow_dissect(skb, &keys)) return; - if (keys.ports) { - if ((__force u16)keys.port16[1] < (__force u16)keys.port16[0]) - swap(keys.port16[0], keys.port16[1]); + if (keys.ports) skb->l4_rxhash = 1; - } /* get a consistent hash (same value on both flow directions) */ - if ((__force u32)keys.dst < (__force u32)keys.src) + if (((__force u32)keys.dst < (__force u32)keys.src) || + (((__force u32)keys.dst == (__force u32)keys.src) && + ((__force u16)keys.port16[1] < (__force u16)keys.port16[0]))) { swap(keys.dst, keys.src); + swap(keys.port16[0], keys.port16[1]); + } hash = jhash_3words((__force u32)keys.dst, (__force u32)keys.src, -- cgit v0.10.2 From 4f97704555672f9ab48ca623561e96a9430bec9a Mon Sep 17 00:00:00 2001 From: "Ren, Yongjie" Date: Fri, 7 Sep 2012 07:36:59 +0000 Subject: KVM: x86: Check INVPCID feature bit in EBX of leaf 7 Checks and operations on the INVPCID feature bit should use EBX of CPUID leaf 7 instead of ECX. Signed-off-by: Junjie Mao Signed-off-by: Yongjie Ren Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index c00f03d..002b4a5 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -6575,7 +6575,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) /* Exposing INVPCID only when PCID is exposed */ best = kvm_find_cpuid_entry(vcpu, 0x7, 0); if (vmx_invpcid_supported() && - best && (best->ecx & bit(X86_FEATURE_INVPCID)) && + best && (best->ebx & bit(X86_FEATURE_INVPCID)) && guest_cpuid_has_pcid(vcpu)) { exec_control |= SECONDARY_EXEC_ENABLE_INVPCID; vmcs_write32(SECONDARY_VM_EXEC_CONTROL, @@ -6585,7 +6585,7 @@ static void vmx_cpuid_update(struct kvm_vcpu *vcpu) vmcs_write32(SECONDARY_VM_EXEC_CONTROL, exec_control); if (best) - best->ecx &= ~bit(X86_FEATURE_INVPCID); + best->ebx &= ~bit(X86_FEATURE_INVPCID); } } -- cgit v0.10.2 From 8404663f81d212918ff85f493649a7991209fa04 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 7 Sep 2012 18:22:28 +0100 Subject: ARM: 7527/1: uaccess: explicitly check __user pointer when !CPU_USE_DOMAINS The {get,put}_user macros don't perform range checking on the provided __user address when !CPU_HAS_DOMAINS. This patch reworks the out-of-line assembly accessors to check the user address against a specified limit, returning -EFAULT if is is out of range. [will: changed get_user register allocation to match put_user] [rmk: fixed building on older ARM architectures] Reported-by: Catalin Marinas Signed-off-by: Will Deacon Cc: stable@vger.kernel.org Signed-off-by: Russell King diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h index 03fb936..5c8b3bf4 100644 --- a/arch/arm/include/asm/assembler.h +++ b/arch/arm/include/asm/assembler.h @@ -320,4 +320,12 @@ .size \name , . - \name .endm + .macro check_uaccess, addr:req, size:req, limit:req, tmp:req, bad:req +#ifndef CONFIG_CPU_USE_DOMAINS + adds \tmp, \addr, #\size - 1 + sbcccs \tmp, \tmp, \limit + bcs \bad +#endif + .endm + #endif /* __ASM_ASSEMBLER_H__ */ diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 479a635..6f83ad6 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -101,28 +101,39 @@ extern int __get_user_1(void *); extern int __get_user_2(void *); extern int __get_user_4(void *); -#define __get_user_x(__r2,__p,__e,__s,__i...) \ +#define __GUP_CLOBBER_1 "lr", "cc" +#ifdef CONFIG_CPU_USE_DOMAINS +#define __GUP_CLOBBER_2 "ip", "lr", "cc" +#else +#define __GUP_CLOBBER_2 "lr", "cc" +#endif +#define __GUP_CLOBBER_4 "lr", "cc" + +#define __get_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%1", "r2") \ + __asmeq("%3", "r1") \ "bl __get_user_" #__s \ : "=&r" (__e), "=r" (__r2) \ - : "0" (__p) \ - : __i, "cc") + : "0" (__p), "r" (__l) \ + : __GUP_CLOBBER_##__s) #define get_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ register unsigned long __r2 asm("r2"); \ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __get_user_x(__r2, __p, __e, 1, "lr"); \ - break; \ + __get_user_x(__r2, __p, __e, __l, 1); \ + break; \ case 2: \ - __get_user_x(__r2, __p, __e, 2, "r3", "lr"); \ + __get_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __get_user_x(__r2, __p, __e, 4, "lr"); \ + __get_user_x(__r2, __p, __e, __l, 4); \ break; \ default: __e = __get_user_bad(); break; \ } \ @@ -135,31 +146,34 @@ extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); extern int __put_user_8(void *, unsigned long long); -#define __put_user_x(__r2,__p,__e,__s) \ +#define __put_user_x(__r2,__p,__e,__l,__s) \ __asm__ __volatile__ ( \ __asmeq("%0", "r0") __asmeq("%2", "r2") \ + __asmeq("%3", "r1") \ "bl __put_user_" #__s \ : "=&r" (__e) \ - : "0" (__p), "r" (__r2) \ + : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") #define put_user(x,p) \ ({ \ + unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ + register unsigned long __l asm("r1") = __limit; \ register int __e asm("r0"); \ switch (sizeof(*(__p))) { \ case 1: \ - __put_user_x(__r2, __p, __e, 1); \ + __put_user_x(__r2, __p, __e, __l, 1); \ break; \ case 2: \ - __put_user_x(__r2, __p, __e, 2); \ + __put_user_x(__r2, __p, __e, __l, 2); \ break; \ case 4: \ - __put_user_x(__r2, __p, __e, 4); \ + __put_user_x(__r2, __p, __e, __l, 4); \ break; \ case 8: \ - __put_user_x(__r2, __p, __e, 8); \ + __put_user_x(__r2, __p, __e, __l, 8); \ break; \ default: __e = __put_user_bad(); break; \ } \ diff --git a/arch/arm/lib/getuser.S b/arch/arm/lib/getuser.S index 11093a7..9b06bb4 100644 --- a/arch/arm/lib/getuser.S +++ b/arch/arm/lib/getuser.S @@ -16,8 +16,9 @@ * __get_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * Outputs: r0 is the error code - * r2, r3 contains the zero-extended value + * r2 contains the zero-extended value * lr corrupted * * No other registers must be altered. (see @@ -27,33 +28,39 @@ * Note also that it is intended that __get_user_bad is not global. */ #include +#include #include #include ENTRY(__get_user_1) + check_uaccess r0, 1, r1, r2, __get_user_bad 1: TUSER(ldrb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__get_user_1) ENTRY(__get_user_2) -#ifdef CONFIG_THUMB2_KERNEL -2: TUSER(ldrb) r2, [r0] -3: TUSER(ldrb) r3, [r0, #1] + check_uaccess r0, 2, r1, r2, __get_user_bad +#ifdef CONFIG_CPU_USE_DOMAINS +rb .req ip +2: ldrbt r2, [r0], #1 +3: ldrbt rb, [r0], #0 #else -2: TUSER(ldrb) r2, [r0], #1 -3: TUSER(ldrb) r3, [r0] +rb .req r0 +2: ldrb r2, [r0] +3: ldrb rb, [r0, #1] #endif #ifndef __ARMEB__ - orr r2, r2, r3, lsl #8 + orr r2, r2, rb, lsl #8 #else - orr r2, r3, r2, lsl #8 + orr r2, rb, r2, lsl #8 #endif mov r0, #0 mov pc, lr ENDPROC(__get_user_2) ENTRY(__get_user_4) + check_uaccess r0, 4, r1, r2, __get_user_bad 4: TUSER(ldr) r2, [r0] mov r0, #0 mov pc, lr diff --git a/arch/arm/lib/putuser.S b/arch/arm/lib/putuser.S index 7db2599..3d73dcb 100644 --- a/arch/arm/lib/putuser.S +++ b/arch/arm/lib/putuser.S @@ -16,6 +16,7 @@ * __put_user_X * * Inputs: r0 contains the address + * r1 contains the address limit, which must be preserved * r2, r3 contains the value * Outputs: r0 is the error code * lr corrupted @@ -27,16 +28,19 @@ * Note also that it is intended that __put_user_bad is not global. */ #include +#include #include #include ENTRY(__put_user_1) + check_uaccess r0, 1, r1, ip, __put_user_bad 1: TUSER(strb) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_1) ENTRY(__put_user_2) + check_uaccess r0, 2, r1, ip, __put_user_bad mov ip, r2, lsr #8 #ifdef CONFIG_THUMB2_KERNEL #ifndef __ARMEB__ @@ -60,12 +64,14 @@ ENTRY(__put_user_2) ENDPROC(__put_user_2) ENTRY(__put_user_4) + check_uaccess r0, 4, r1, ip, __put_user_bad 4: TUSER(str) r2, [r0] mov r0, #0 mov pc, lr ENDPROC(__put_user_4) ENTRY(__put_user_8) + check_uaccess r0, 8, r1, ip, __put_user_bad #ifdef CONFIG_THUMB2_KERNEL 5: TUSER(str) r2, [r0] 6: TUSER(str) r3, [r0, #4] -- cgit v0.10.2 From ad72907acd2943304c292ae36960bb66e6dc23c9 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:24:10 +0100 Subject: ARM: 7528/1: uaccess: annotate [__]{get,put}_user functions with might_fault() The user access functions may generate a fault, resulting in invocation of a handler that may sleep. This patch annotates the accessors with might_fault() so that we print a warning if they are invoked from atomic context and help lockdep keep track of mmap_sem. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h index 6f83ad6..77bd79f 100644 --- a/arch/arm/include/asm/uaccess.h +++ b/arch/arm/include/asm/uaccess.h @@ -118,7 +118,7 @@ extern int __get_user_4(void *); : "0" (__p), "r" (__l) \ : __GUP_CLOBBER_##__s) -#define get_user(x,p) \ +#define __get_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __user *__p asm("r0") = (p);\ @@ -141,6 +141,12 @@ extern int __get_user_4(void *); __e; \ }) +#define get_user(x,p) \ + ({ \ + might_fault(); \ + __get_user_check(x,p); \ + }) + extern int __put_user_1(void *, unsigned int); extern int __put_user_2(void *, unsigned int); extern int __put_user_4(void *, unsigned int); @@ -155,7 +161,7 @@ extern int __put_user_8(void *, unsigned long long); : "0" (__p), "r" (__r2), "r" (__l) \ : "ip", "lr", "cc") -#define put_user(x,p) \ +#define __put_user_check(x,p) \ ({ \ unsigned long __limit = current_thread_info()->addr_limit - 1; \ register const typeof(*(p)) __r2 asm("r2") = (x); \ @@ -180,6 +186,12 @@ extern int __put_user_8(void *, unsigned long long); __e; \ }) +#define put_user(x,p) \ + ({ \ + might_fault(); \ + __put_user_check(x,p); \ + }) + #else /* CONFIG_MMU */ /* @@ -233,6 +245,7 @@ do { \ unsigned long __gu_addr = (unsigned long)(ptr); \ unsigned long __gu_val; \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ @@ -314,6 +327,7 @@ do { \ unsigned long __pu_addr = (unsigned long)(ptr); \ __typeof__(*(ptr)) __pu_val = (x); \ __chk_user_ptr(ptr); \ + might_fault(); \ switch (sizeof(*(ptr))) { \ case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ -- cgit v0.10.2 From beafa0de3d3e0d0ece7638cded879815f359f1cb Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 7 Sep 2012 18:24:53 +0100 Subject: ARM: 7529/1: delay: set loops_per_jiffy when moving to timer-based loop The delay functions may be called by some platforms between switching to the timer-based delay loop but before calibration. In this case, the initial loops_per_jiffy may not be suitable for the timer (although a compromise may be achievable) and delay times may be considered too inaccurate. This patch updates loops_per_jiffy when switching to the timer-based delay loop so that delays are consistent prior to calibration. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index d6dacc6..395d5fb 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -59,6 +59,7 @@ void __init init_current_timer_delay(unsigned long freq) { pr_info("Switching to timer-based delay loop\n"); lpj_fine = freq / HZ; + loops_per_jiffy = lpj_fine; arm_delay_ops.delay = __timer_delay; arm_delay_ops.const_udelay = __timer_const_udelay; arm_delay_ops.udelay = __timer_udelay; -- cgit v0.10.2 From 64f509ce71b08d037998e93dd51180c19b2f464c Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 31 Aug 2012 09:55:53 +0000 Subject: netfilter: Mark SYN/ACK packets as invalid from original direction Clients should not send such packets. By accepting them, we open up a hole by wich ephemeral ports can be discovered in an off-path attack. See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel, http://arxiv.org/abs/1201.2074 Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index a5ac11e..aba98f9 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -158,21 +158,18 @@ static const u8 tcp_conntracks[2][6][TCP_CONNTRACK_MAX] = { * sCL -> sSS */ /* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */ -/*synack*/ { sIV, sIV, sIG, sIG, sIG, sIG, sIG, sIG, sIG, sSR }, +/*synack*/ { sIV, sIV, sSR, sIV, sIV, sIV, sIV, sIV, sIV, sSR }, /* * sNO -> sIV Too late and no reason to do anything * sSS -> sIV Client can't send SYN and then SYN/ACK * sS2 -> sSR SYN/ACK sent to SYN2 in simultaneous open - * sSR -> sIG - * sES -> sIG Error: SYNs in window outside the SYN_SENT state - * are errors. Receiver will reply with RST - * and close the connection. - * Or we are not in sync and hold a dead connection. - * sFW -> sIG - * sCW -> sIG - * sLA -> sIG - * sTW -> sIG - * sCL -> sIG + * sSR -> sSR Late retransmitted SYN/ACK in simultaneous open + * sES -> sIV Invalid SYN/ACK packets sent by the client + * sFW -> sIV + * sCW -> sIV + * sLA -> sIV + * sTW -> sIV + * sCL -> sIV */ /* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */ /*fin*/ { sIV, sIV, sFW, sFW, sLA, sLA, sLA, sTW, sCL, sIV }, -- cgit v0.10.2 From 4a70bbfaef0361d27272629d1a250a937edcafe4 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Fri, 31 Aug 2012 09:55:54 +0000 Subject: netfilter: Validate the sequence number of dataless ACK packets as well We spare nothing by not validating the sequence number of dataless ACK packets and enabling it makes harder off-path attacks. See: "Reflection scan: an Off-Path Attack on TCP" by Jan Wrobel, http://arxiv.org/abs/1201.2074 Signed-off-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index aba98f9..e046b37 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -630,15 +630,9 @@ static bool tcp_in_window(const struct nf_conn *ct, ack = sack = receiver->td_end; } - if (seq == end - && (!tcph->rst - || (seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT))) + if (tcph->rst && seq == 0 && state->state == TCP_CONNTRACK_SYN_SENT) /* - * Packets contains no data: we assume it is valid - * and check the ack value only. - * However RST segments are always validated by their - * SEQ number, except when seq == 0 (reset sent answering - * SYN. + * RST sent answering SYN. */ seq = end = sender->td_end; -- cgit v0.10.2 From db2e1f43e7b2320d0450fe34e5ac4ac4d8c7708d Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Thu, 6 Sep 2012 09:44:59 +0200 Subject: s390/hwcaps: do not report high gprs for 31 bit kernel The bit for high gprs in the AT_HWCAP auxiliary vector field and the highgprs tag in the output of /proc/cpuinfo should not be set for 31 bit kernels. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c index f86c81e..40b5769 100644 --- a/arch/s390/kernel/setup.c +++ b/arch/s390/kernel/setup.c @@ -974,11 +974,13 @@ static void __init setup_hwcaps(void) if (MACHINE_HAS_HPAGE) elf_hwcap |= HWCAP_S390_HPAGE; +#if defined(CONFIG_64BIT) /* * 64-bit register support for 31-bit processes * HWCAP_S390_HIGH_GPRS is bit 9. */ elf_hwcap |= HWCAP_S390_HIGH_GPRS; +#endif get_cpu_id(&cpu_id); switch (cpu_id.machine) { -- cgit v0.10.2 From 4a8f1ddde942e232387e6129ce4f4c412e43802f Mon Sep 17 00:00:00 2001 From: James Ralston Date: Mon, 10 Sep 2012 10:14:02 +0200 Subject: i2c-i801: Add Device IDs for Intel Lynx Point-LP PCH Add the SMBus Device IDs for the Intel Lynx Point-LP PCH. Signed-off-by: James Ralston Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801 index 615142d..157416e 100644 --- a/Documentation/i2c/busses/i2c-i801 +++ b/Documentation/i2c/busses/i2c-i801 @@ -21,6 +21,7 @@ Supported adapters: * Intel DH89xxCC (PCH) * Intel Panther Point (PCH) * Intel Lynx Point (PCH) + * Intel Lynx Point-LP (PCH) Datasheets: Publicly available at the Intel website On Intel Patsburg and later chipsets, both the normal host SMBus controller diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index b4aaa1b..af8bc83 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -104,6 +104,7 @@ config I2C_I801 DH89xxCC (PCH) Panther Point (PCH) Lynx Point (PCH) + Lynx Point-LP (PCH) This driver can also be built as a module. If so, the module will be called i2c-i801. diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 898dcf9..33e9b0c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -52,6 +52,7 @@ DH89xxCC (PCH) 0x2330 32 hard yes yes yes Panther Point (PCH) 0x1e22 32 hard yes yes yes Lynx Point (PCH) 0x8c22 32 hard yes yes yes + Lynx Point-LP (PCH) 0x9c22 32 hard yes yes yes Features supported by this driver: Software PEC no @@ -155,6 +156,7 @@ #define PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS 0x2330 #define PCI_DEVICE_ID_INTEL_5_3400_SERIES_SMBUS 0x3b30 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS 0x8c22 +#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS 0x9c22 struct i801_priv { struct i2c_adapter adapter; @@ -771,6 +773,7 @@ static DEFINE_PCI_DEVICE_TABLE(i801_ids) = { { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DH89XXCC_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_SMBUS) }, { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS) }, + { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS) }, { 0, } }; -- cgit v0.10.2 From e68bb91baa0bb9817567bd45d560919e8e26373b Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Mon, 10 Sep 2012 10:14:02 +0200 Subject: i2c-designware: Fix build error if CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y This patch adds config I2C_DESIGNWARE_CORE in Kconfig, and let I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI select I2C_DESIGNWARE_CORE. Because both I2C_DESIGNWARE_PLATFORM and I2C_DESIGNWARE_PCI can be built as built-in or module, we also need to export the functions in i2c-designware-core. This fixes below build error when CONFIG_I2C_DESIGNWARE_PLATFORM=y && CONFIG_I2C_DESIGNWARE_PCI=y: LD drivers/i2c/busses/built-in.o drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_clear_int': i2c-designware-core.c:(.text+0xa10): multiple definition of `i2c_dw_clear_int' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x928): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_init': i2c-designware-core.c:(.text+0x178): multiple definition of `i2c_dw_init' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x90): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `dw_readl': i2c-designware-core.c:(.text+0xe8): multiple definition of `dw_readl' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x0): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_isr': i2c-designware-core.c:(.text+0x724): multiple definition of `i2c_dw_isr' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x63c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer': i2c-designware-core.c:(.text+0x4b0): multiple definition of `i2c_dw_xfer' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c8): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_is_enabled': i2c-designware-core.c:(.text+0x9d4): multiple definition of `i2c_dw_is_enabled' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8ec): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `dw_writel': i2c-designware-core.c:(.text+0x124): multiple definition of `dw_writel' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x3c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_xfer_msg': i2c-designware-core.c:(.text+0x2e8): multiple definition of `i2c_dw_xfer_msg' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x200): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_enable': i2c-designware-core.c:(.text+0x9c8): multiple definition of `i2c_dw_enable' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8e0): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_read_comp_param': i2c-designware-core.c:(.text+0xa24): multiple definition of `i2c_dw_read_comp_param' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x93c): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable': i2c-designware-core.c:(.text+0x9dc): multiple definition of `i2c_dw_disable' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x8f4): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_func': i2c-designware-core.c:(.text+0x710): multiple definition of `i2c_dw_func' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x628): first defined here drivers/i2c/busses/i2c-designware-pci.o: In function `i2c_dw_disable_int': i2c-designware-core.c:(.text+0xa18): multiple definition of `i2c_dw_disable_int' drivers/i2c/busses/i2c-designware-platform.o:i2c-designware-platdrv.c:(.text+0x930): first defined here make[3]: *** [drivers/i2c/busses/built-in.o] Error 1 make[2]: *** [drivers/i2c/busses] Error 2 make[1]: *** [drivers/i2c] Error 2 make: *** [drivers] Error 2 Signed-off-by: Axel Lin Signed-off-by: Jean Delvare Tested-by: Jiri Slaby Cc: stable@vger.kernel.org [3.2+] diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index af8bc83..970a161 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -355,9 +355,13 @@ config I2C_DAVINCI devices such as DaVinci NIC. For details please see http://www.ti.com/davinci +config I2C_DESIGNWARE_CORE + tristate + config I2C_DESIGNWARE_PLATFORM tristate "Synopsys DesignWare Platform" depends on HAVE_CLK + select I2C_DESIGNWARE_CORE help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. @@ -368,6 +372,7 @@ config I2C_DESIGNWARE_PLATFORM config I2C_DESIGNWARE_PCI tristate "Synopsys DesignWare PCI" depends on PCI + select I2C_DESIGNWARE_CORE help If you say yes to this option, support will be included for the Synopsys DesignWare I2C adapter. Only master mode is supported. diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index ce3c2be..37c4182 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -33,10 +33,11 @@ obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o obj-$(CONFIG_I2C_BLACKFIN_TWI) += i2c-bfin-twi.o obj-$(CONFIG_I2C_CPM) += i2c-cpm.o obj-$(CONFIG_I2C_DAVINCI) += i2c-davinci.o +obj-$(CONFIG_I2C_DESIGNWARE_CORE) += i2c-designware-core.o obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM) += i2c-designware-platform.o -i2c-designware-platform-objs := i2c-designware-platdrv.o i2c-designware-core.o +i2c-designware-platform-objs := i2c-designware-platdrv.o obj-$(CONFIG_I2C_DESIGNWARE_PCI) += i2c-designware-pci.o -i2c-designware-pci-objs := i2c-designware-pcidrv.o i2c-designware-core.o +i2c-designware-pci-objs := i2c-designware-pcidrv.o obj-$(CONFIG_I2C_EG20T) += i2c-eg20t.o obj-$(CONFIG_I2C_GPIO) += i2c-gpio.o obj-$(CONFIG_I2C_HIGHLANDER) += i2c-highlander.o diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 1e48bec..7b8ebbe 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -25,6 +25,7 @@ * ---------------------------------------------------------------------------- * */ +#include #include #include #include @@ -316,6 +317,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev) dw_writel(dev, dev->master_cfg , DW_IC_CON); return 0; } +EXPORT_SYMBOL_GPL(i2c_dw_init); /* * Waiting for bus not busy @@ -568,12 +570,14 @@ done: return ret; } +EXPORT_SYMBOL_GPL(i2c_dw_xfer); u32 i2c_dw_func(struct i2c_adapter *adap) { struct dw_i2c_dev *dev = i2c_get_adapdata(adap); return dev->functionality; } +EXPORT_SYMBOL_GPL(i2c_dw_func); static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) { @@ -678,17 +682,20 @@ tx_aborted: return IRQ_HANDLED; } +EXPORT_SYMBOL_GPL(i2c_dw_isr); void i2c_dw_enable(struct dw_i2c_dev *dev) { /* Enable the adapter */ dw_writel(dev, 1, DW_IC_ENABLE); } +EXPORT_SYMBOL_GPL(i2c_dw_enable); u32 i2c_dw_is_enabled(struct dw_i2c_dev *dev) { return dw_readl(dev, DW_IC_ENABLE); } +EXPORT_SYMBOL_GPL(i2c_dw_is_enabled); void i2c_dw_disable(struct dw_i2c_dev *dev) { @@ -699,18 +706,22 @@ void i2c_dw_disable(struct dw_i2c_dev *dev) dw_writel(dev, 0, DW_IC_INTR_MASK); dw_readl(dev, DW_IC_CLR_INTR); } +EXPORT_SYMBOL_GPL(i2c_dw_disable); void i2c_dw_clear_int(struct dw_i2c_dev *dev) { dw_readl(dev, DW_IC_CLR_INTR); } +EXPORT_SYMBOL_GPL(i2c_dw_clear_int); void i2c_dw_disable_int(struct dw_i2c_dev *dev) { dw_writel(dev, 0, DW_IC_INTR_MASK); } +EXPORT_SYMBOL_GPL(i2c_dw_disable_int); u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev) { return dw_readl(dev, DW_IC_COMP_PARAM_1); } +EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param); -- cgit v0.10.2 From 390946b17260797635cd9e65496b5a17b2db0a5d Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Mon, 10 Sep 2012 10:14:02 +0200 Subject: i2c-core: Fix for lockdep validator If kernel is compiled with CONFIG_PROVE_LOCKING the validator raises an error when a multiplexer is removed via sysfs and sub-clients are connected to it. This is a false positive. Documentation/lockdep-design.txt recommends to handle this via calls to mutex_lock_nested(). Based on an earlier fix from Michael Lawnick. Note that the extra code resolves to nothing unless CONFIG_DEBUG_LOCK_ALLOC=y. Signed-off-by: Jean Delvare Cc: Michael Lawnick diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 2efa56c..2091ae8 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -637,6 +637,22 @@ static void i2c_adapter_dev_release(struct device *dev) } /* + * This function is only needed for mutex_lock_nested, so it is never + * called unless locking correctness checking is enabled. Thus we + * make it inline to avoid a compiler warning. That's what gcc ends up + * doing anyway. + */ +static inline unsigned int i2c_adapter_depth(struct i2c_adapter *adapter) +{ + unsigned int depth = 0; + + while ((adapter = i2c_parent_is_i2c_adapter(adapter))) + depth++; + + return depth; +} + +/* * Let users instantiate I2C devices through sysfs. This can be used when * platform initialization code doesn't contain the proper data for * whatever reason. Also useful for drivers that do device detection and @@ -726,7 +742,8 @@ i2c_sysfs_delete_device(struct device *dev, struct device_attribute *attr, /* Make sure the device was added through sysfs */ res = -ENOENT; - mutex_lock(&adap->userspace_clients_lock); + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); list_for_each_entry_safe(client, next, &adap->userspace_clients, detected) { if (client->addr == addr) { @@ -1073,7 +1090,8 @@ int i2c_del_adapter(struct i2c_adapter *adap) return res; /* Remove devices instantiated from sysfs */ - mutex_lock(&adap->userspace_clients_lock); + mutex_lock_nested(&adap->userspace_clients_lock, + i2c_adapter_depth(adap)); list_for_each_entry_safe(client, next, &adap->userspace_clients, detected) { dev_dbg(&adap->dev, "Removing %s at 0x%x\n", client->name, -- cgit v0.10.2 From 07dc59f0988cb54fd87bd373b3b27eb2401dd811 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 10 Sep 2012 09:39:31 +0200 Subject: ALSA: hda - Fix Oops at codec reset/reconfig snd_hda_codec_reset() calls restore_pincfgs() where the codec is powered up again, which eventually tries to resume and initialize via the callbacks of the codec. However, it's the place just after codec free callback, thus no codec callbacks should be called after that. On a codec like CS4206, it results in Oops due to the access in init callback. This patch fixes the issue by clearing the codec callbacks properly after freeing codec. Reported-by: Daniel J Blueman Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index f25c24c..1c65cc5 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -2353,6 +2353,7 @@ int snd_hda_codec_reset(struct hda_codec *codec) } if (codec->patch_ops.free) codec->patch_ops.free(codec); + memset(&codec->patch_ops, 0, sizeof(codec->patch_ops)); snd_hda_jack_tbl_clear(codec); codec->proc_widget_hook = NULL; codec->spec = NULL; @@ -2368,7 +2369,6 @@ int snd_hda_codec_reset(struct hda_codec *codec) codec->num_pcms = 0; codec->pcm_info = NULL; codec->preset = NULL; - memset(&codec->patch_ops, 0, sizeof(codec->patch_ops)); codec->slave_dig_outs = NULL; codec->spdif_status_reset = 0; module_put(codec->owner); -- cgit v0.10.2 From 4484141a94f4a5afea6ebc0b2abba0aa1b0ae9d1 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Fri, 7 Sep 2012 14:14:20 +0800 Subject: KVM: fix error paths for failed gfn_to_page() calls This bug was triggered: [ 4220.198458] BUG: unable to handle kernel paging request at fffffffffffffffe [ 4220.203907] IP: [] put_page+0xf/0x34 ...... [ 4220.237326] Call Trace: [ 4220.237361] [] kvm_arch_destroy_vm+0xf9/0x101 [kvm] [ 4220.237382] [] kvm_put_kvm+0xcc/0x127 [kvm] [ 4220.237401] [] kvm_vcpu_release+0x18/0x1c [kvm] [ 4220.237407] [] __fput+0x111/0x1ed [ 4220.237411] [] ____fput+0xe/0x10 [ 4220.237418] [] task_work_run+0x5d/0x88 [ 4220.237424] [] do_exit+0x2bf/0x7ca The test case: printf(fmt, ##args); \ exit(-1);} while (0) static int create_vm(void) { int sys_fd, vm_fd; sys_fd = open("/dev/kvm", O_RDWR); if (sys_fd < 0) die("open /dev/kvm fail.\n"); vm_fd = ioctl(sys_fd, KVM_CREATE_VM, 0); if (vm_fd < 0) die("KVM_CREATE_VM fail.\n"); return vm_fd; } static int create_vcpu(int vm_fd) { int vcpu_fd; vcpu_fd = ioctl(vm_fd, KVM_CREATE_VCPU, 0); if (vcpu_fd < 0) die("KVM_CREATE_VCPU ioctl.\n"); printf("Create vcpu.\n"); return vcpu_fd; } static void *vcpu_thread(void *arg) { int vm_fd = (int)(long)arg; create_vcpu(vm_fd); return NULL; } int main(int argc, char *argv[]) { pthread_t thread; int vm_fd; (void)argc; (void)argv; vm_fd = create_vm(); pthread_create(&thread, NULL, vcpu_thread, (void *)(long)vm_fd); printf("Exit.\n"); return 0; } It caused by release kvm->arch.ept_identity_map_addr which is the error page. The parent thread can send KILL signal to the vcpu thread when it was exiting which stops faulting pages and potentially allocating memory. So gfn_to_pfn/gfn_to_page may fail at this time Fixed by checking the page before it is used Signed-off-by: Xiao Guangrong Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 002b4a5..b1eb202 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -3619,6 +3619,7 @@ static void seg_setup(int seg) static int alloc_apic_access_page(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3633,7 +3634,13 @@ static int alloc_apic_access_page(struct kvm *kvm) if (r) goto out; - kvm->arch.apic_access_page = gfn_to_page(kvm, 0xfee00); + page = gfn_to_page(kvm, 0xfee00); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.apic_access_page = page; out: mutex_unlock(&kvm->slots_lock); return r; @@ -3641,6 +3648,7 @@ out: static int alloc_identity_pagetable(struct kvm *kvm) { + struct page *page; struct kvm_userspace_memory_region kvm_userspace_mem; int r = 0; @@ -3656,8 +3664,13 @@ static int alloc_identity_pagetable(struct kvm *kvm) if (r) goto out; - kvm->arch.ept_identity_pagetable = gfn_to_page(kvm, - kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + page = gfn_to_page(kvm, kvm->arch.ept_identity_map_addr >> PAGE_SHIFT); + if (is_error_page(page)) { + r = -EFAULT; + goto out; + } + + kvm->arch.ept_identity_pagetable = page; out: mutex_unlock(&kvm->slots_lock); return r; diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 148ed66..2966c84 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5113,17 +5113,20 @@ static void post_kvm_run_save(struct kvm_vcpu *vcpu) !kvm_event_needs_reinjection(vcpu); } -static void vapic_enter(struct kvm_vcpu *vcpu) +static int vapic_enter(struct kvm_vcpu *vcpu) { struct kvm_lapic *apic = vcpu->arch.apic; struct page *page; if (!apic || !apic->vapic_addr) - return; + return 0; page = gfn_to_page(vcpu->kvm, apic->vapic_addr >> PAGE_SHIFT); + if (is_error_page(page)) + return -EFAULT; vcpu->arch.apic->vapic_page = page; + return 0; } static void vapic_exit(struct kvm_vcpu *vcpu) @@ -5430,7 +5433,11 @@ static int __vcpu_run(struct kvm_vcpu *vcpu) } vcpu->srcu_idx = srcu_read_lock(&kvm->srcu); - vapic_enter(vcpu); + r = vapic_enter(vcpu); + if (r) { + srcu_read_unlock(&kvm->srcu, vcpu->srcu_idx); + return r; + } r = 1; while (r > 0) { -- cgit v0.10.2 From e352614cd3e7a5f7af7cff894a3b5a705181de21 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 10 Sep 2012 12:52:02 +0800 Subject: hwspinlock/core: move the dereference below the NULL test The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Ohad Ben-Cohen diff --git a/drivers/hwspinlock/hwspinlock_core.c b/drivers/hwspinlock/hwspinlock_core.c index 1201a15..db713c0 100644 --- a/drivers/hwspinlock/hwspinlock_core.c +++ b/drivers/hwspinlock/hwspinlock_core.c @@ -552,7 +552,7 @@ EXPORT_SYMBOL_GPL(hwspin_lock_request_specific); */ int hwspin_lock_free(struct hwspinlock *hwlock) { - struct device *dev = hwlock->bank->dev; + struct device *dev; struct hwspinlock *tmp; int ret; @@ -561,6 +561,7 @@ int hwspin_lock_free(struct hwspinlock *hwlock) return -EINVAL; } + dev = hwlock->bank->dev; mutex_lock(&hwspinlock_tree_lock); /* make sure the hwspinlock is used */ -- cgit v0.10.2 From f3d87524975f01b885fc3d009c6ab6afd0d00746 Mon Sep 17 00:00:00 2001 From: Thomas Petazzoni Date: Mon, 10 Sep 2012 16:14:16 +0200 Subject: arm: mm: fix DMA pool affiliation check The __free_from_pool() function was changed in e9da6e9905e639b0f842a244bc770b48ad0523e9. Unfortunately, the test that checks whether the provided (start,size) is within the DMA pool has been improperly modified. It used to be: if (start < coherent_head.vm_start || end > coherent_head.vm_end) Where coherent_head.vm_end was non-inclusive (i.e, it did not include the first byte after the pool). The test has been changed to: if (start < pool->vaddr || start > pool->vaddr + pool->size) So now pool->vaddr + pool->size is inclusive (i.e, it includes the first byte after the pool), so the test should be >= instead of >. This bug causes the following message when freeing the *first* DMA coherent buffer that has been allocated, because its virtual address is exactly equal to pool->vaddr + pool->size : WARNING: at /home/thomas/projets/linux-2.6/arch/arm/mm/dma-mapping.c:463 __free_from_pool+0xa4/0xc0() freeing wrong coherent size from pool Signed-off-by: Thomas Petazzoni Cc: Marek Szyprowski Cc: Russell King Cc: Lior Amsalem Cc: Maen Suleiman Cc: Tawfik Bayouk Cc: Shadi Ammouri Cc: Eran Ben-Avi Cc: Yehuda Yitschak Cc: Nadav Haklai [m.szyprowski: rebased onto v3.6-rc5 and resolved conflict] Signed-off-by: Marek Szyprowski diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 051204f..e59c4ab 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -489,7 +489,7 @@ static bool __in_atomic_pool(void *start, size_t size) void *pool_start = pool->vaddr; void *pool_end = pool->vaddr + pool->size; - if (start < pool_start || start > pool_end) + if (start < pool_start || start >= pool_end) return false; if (end <= pool_end) -- cgit v0.10.2 From c06fad9d28c95b024ea10455cf1397432b12848d Mon Sep 17 00:00:00 2001 From: "Philip, Avinash" Date: Thu, 23 Aug 2012 12:29:46 +0530 Subject: pwm: pwm-tiecap: Disable APWM mode after configure APWM mode is enabled while configuring PWM device. This was done to handle shadow & immediate mode update of period and compare registers. However, leaving it enabled after configuring will cause APWM output on PWM pin even before enabling PWM device. Fix the same by disabling APWM mode after configuring if PWM device is not running. Signed-off-by: Philip, Avinash Signed-off-by: Thierry Reding diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c index 0b66d0f..4b66889 100644 --- a/drivers/pwm/pwm-tiecap.c +++ b/drivers/pwm/pwm-tiecap.c @@ -100,6 +100,13 @@ static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, writel(period_cycles, pc->mmio_base + CAP3); } + if (!test_bit(PWMF_ENABLED, &pwm->flags)) { + reg_val = readw(pc->mmio_base + ECCTL2); + /* Disable APWM mode to put APWM output Low */ + reg_val &= ~ECCTL2_APWM_MODE; + writew(reg_val, pc->mmio_base + ECCTL2); + } + pm_runtime_put_sync(pc->chip.dev); return 0; } -- cgit v0.10.2 From 01b2d4536f0215c6d97d77e157afee04300ffc90 Mon Sep 17 00:00:00 2001 From: "Philip, Avinash" Date: Thu, 6 Sep 2012 10:44:25 +0530 Subject: pwm: pwm-tiehrpwm: Fix conflicting channel period setting EHRPWM hardware supports 2 independent PWM channels. However the device uses only one register to handle period setting for both channels. So both channels should be configured for same period (in nsec). Fix the same by returning error for conflicting period values. However, allow 1. Configuration of period settings if not conflicting with other channels 2. Re-configuring of period settings if no other channels being configured Signed-off-by: Philip, Avinash Signed-off-by: Thierry Reding diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c index c3756d1..b1996bc 100644 --- a/drivers/pwm/pwm-tiehrpwm.c +++ b/drivers/pwm/pwm-tiehrpwm.c @@ -104,6 +104,7 @@ struct ehrpwm_pwm_chip { struct pwm_chip chip; unsigned int clk_rate; void __iomem *mmio_base; + unsigned long period_cycles[NUM_PWM_CHANNEL]; }; static inline struct ehrpwm_pwm_chip *to_ehrpwm_pwm_chip(struct pwm_chip *chip) @@ -210,6 +211,7 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long long c; unsigned long period_cycles, duty_cycles; unsigned short ps_divval, tb_divval; + int i; if (period_ns < 0 || duty_ns < 0 || period_ns > NSEC_PER_SEC) return -ERANGE; @@ -229,6 +231,28 @@ static int ehrpwm_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, duty_cycles = (unsigned long)c; } + /* + * Period values should be same for multiple PWM channels as IP uses + * same period register for multiple channels. + */ + for (i = 0; i < NUM_PWM_CHANNEL; i++) { + if (pc->period_cycles[i] && + (pc->period_cycles[i] != period_cycles)) { + /* + * Allow channel to reconfigure period if no other + * channels being configured. + */ + if (i == pwm->hwpwm) + continue; + + dev_err(chip->dev, "Period value conflicts with channel %d\n", + i); + return -EINVAL; + } + } + + pc->period_cycles[pwm->hwpwm] = period_cycles; + /* Configure clock prescaler to support Low frequency PWM wave */ if (set_prescale_div(period_cycles/PERIOD_MAX, &ps_divval, &tb_divval)) { @@ -320,10 +344,15 @@ static void ehrpwm_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm) static void ehrpwm_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm) { + struct ehrpwm_pwm_chip *pc = to_ehrpwm_pwm_chip(chip); + if (test_bit(PWMF_ENABLED, &pwm->flags)) { dev_warn(chip->dev, "Removing PWM device without disabling\n"); pm_runtime_put_sync(chip->dev); } + + /* set period value to zero on free */ + pc->period_cycles[pwm->hwpwm] = 0; } static const struct pwm_ops ehrpwm_pwm_ops = { -- cgit v0.10.2 From 308b135e4fcc00c80c07e0e04e7afa8edf78583c Mon Sep 17 00:00:00 2001 From: Toshi Kani Date: Mon, 27 Aug 2012 12:52:24 -0600 Subject: hpwdt: Fix kdump issue in hpwdt kdump can be interrupted by watchdog timer when the timer is left activated on the crash kernel. Changed the hpwdt driver to disable watchdog timer at boot-time. This assures that watchdog timer is disabled until /dev/watchdog is opened, and prevents watchdog timer to be left running on the crash kernel. Signed-off-by: Toshi Kani Tested-by: Lisa Mitchell Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck Cc: stable diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 1eff743..ae60406 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -814,6 +814,9 @@ static int __devinit hpwdt_init_one(struct pci_dev *dev, hpwdt_timer_reg = pci_mem_addr + 0x70; hpwdt_timer_con = pci_mem_addr + 0x72; + /* Make sure that timer is disabled until /dev/watchdog is opened */ + hpwdt_stop(); + /* Make sure that we have a valid soft_margin */ if (hpwdt_change_timer(soft_margin)) hpwdt_change_timer(DEFAULT_MARGIN); -- cgit v0.10.2 From b232a70a1735c004f9ee6fdf363def527b9234b6 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 10 Sep 2012 12:41:15 +0800 Subject: watchdog: move the dereference below the NULL test The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c index 6aa46a9..3796434 100644 --- a/drivers/watchdog/watchdog_core.c +++ b/drivers/watchdog/watchdog_core.c @@ -128,11 +128,12 @@ EXPORT_SYMBOL_GPL(watchdog_register_device); void watchdog_unregister_device(struct watchdog_device *wdd) { int ret; - int devno = wdd->cdev.dev; + int devno; if (wdd == NULL) return; + devno = wdd->cdev.dev; ret = watchdog_dev_unregister(wdd); if (ret) pr_err("error unregistering /dev/watchdog (err=%d)\n", ret); -- cgit v0.10.2 From 552a37e9360a293cd20e7f8ff1fb326a244c5f1e Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 10 Sep 2012 10:03:33 -0700 Subject: workqueue: restore POOL_MANAGING_WORKERS This patch restores POOL_MANAGING_WORKERS which was replaced by pool->manager_mutex by 6037315269 "workqueue: use mutex for global_cwq manager exclusion". There's a subtle idle worker depletion bug across CPU hotplug events and we need to distinguish an actual manager and CPU hotplug preventing management. POOL_MANAGING_WORKERS will be used for the former and manager_mutex the later. This patch just lays POOL_MANAGING_WORKERS on top of the existing manager_mutex and doesn't introduce any synchronization changes. The next patch will update it. Note that this patch fixes a non-critical anomaly where too_many_workers() may return %true spuriously while CPU hotplug is in progress. While the issue could schedule idle timer spuriously, it didn't trigger any actual misbehavior. tj: Rewrote patch description. Signed-off-by: Lai Jiangshan Signed-off-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index dc7b845..383548e 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -66,6 +66,7 @@ enum { /* pool flags */ POOL_MANAGE_WORKERS = 1 << 0, /* need to manage workers */ + POOL_MANAGING_WORKERS = 1 << 1, /* managing workers */ /* worker flags */ WORKER_STARTED = 1 << 0, /* started */ @@ -652,7 +653,7 @@ static bool need_to_manage_workers(struct worker_pool *pool) /* Do we have too many workers and should some go away? */ static bool too_many_workers(struct worker_pool *pool) { - bool managing = mutex_is_locked(&pool->manager_mutex); + bool managing = pool->flags & POOL_MANAGING_WORKERS; int nr_idle = pool->nr_idle + managing; /* manager is considered idle */ int nr_busy = pool->nr_workers - nr_idle; @@ -1827,6 +1828,7 @@ static bool manage_workers(struct worker *worker) if (!mutex_trylock(&pool->manager_mutex)) return ret; + pool->flags |= POOL_MANAGING_WORKERS; pool->flags &= ~POOL_MANAGE_WORKERS; /* @@ -1836,6 +1838,7 @@ static bool manage_workers(struct worker *worker) ret |= maybe_destroy_workers(pool); ret |= maybe_create_worker(pool); + pool->flags &= ~POOL_MANAGING_WORKERS; mutex_unlock(&pool->manager_mutex); return ret; } -- cgit v0.10.2 From ee378aa49b594da9bda6a2c768cc5b2ad585f911 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 10 Sep 2012 10:03:44 -0700 Subject: workqueue: fix possible idle worker depletion across CPU hotplug To simplify both normal and CPU hotplug paths, worker management is prevented while CPU hoplug is in progress. This is achieved by CPU hotplug holding the same exclusion mechanism used by workers to ensure there's only one manager per pool. If someone else seems to be performing the manager role, workers proceed to execute work items. CPU hotplug using the same mechanism can lead to idle worker depletion because all workers could proceed to execute work items while CPU hotplug is in progress and CPU hotplug itself wouldn't actually perform the worker management duty - it doesn't guarantee that there's an idle worker left when it releases management. This idle worker depletion, under extreme circumstances, can break forward-progress guarantee and thus lead to deadlock. This patch fixes the bug by using separate mechanisms for manager exclusion among workers and hotplug exclusion. For manager exclusion, POOL_MANAGING_WORKERS which was restored by the previous patch is used. pool->manager_mutex is now only used for exclusion between the elected manager and CPU hotplug. The elected manager won't proceed without holding pool->manager_mutex. This ensures that the worker which won the manager position can't skip managing while CPU hotplug is in progress. It will block on manager_mutex and perform management after CPU hotplug is complete. Note that hotplug may happen while waiting for manager_mutex. A manager isn't either on idle or busy list and thus the hoplug code can't unbind/rebind it. Make the manager handle its own un/rebinding. tj: Updated comment and description. Signed-off-by: Lai Jiangshan Signed-off-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 383548e..1e1373b 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1825,10 +1825,45 @@ static bool manage_workers(struct worker *worker) struct worker_pool *pool = worker->pool; bool ret = false; - if (!mutex_trylock(&pool->manager_mutex)) + if (pool->flags & POOL_MANAGING_WORKERS) return ret; pool->flags |= POOL_MANAGING_WORKERS; + + /* + * To simplify both worker management and CPU hotplug, hold off + * management while hotplug is in progress. CPU hotplug path can't + * grab %POOL_MANAGING_WORKERS to achieve this because that can + * lead to idle worker depletion (all become busy thinking someone + * else is managing) which in turn can result in deadlock under + * extreme circumstances. Use @pool->manager_mutex to synchronize + * manager against CPU hotplug. + * + * manager_mutex would always be free unless CPU hotplug is in + * progress. trylock first without dropping @gcwq->lock. + */ + if (unlikely(!mutex_trylock(&pool->manager_mutex))) { + spin_unlock_irq(&pool->gcwq->lock); + mutex_lock(&pool->manager_mutex); + /* + * CPU hotplug could have happened while we were waiting + * for manager_mutex. Hotplug itself can't handle us + * because manager isn't either on idle or busy list, and + * @gcwq's state and ours could have deviated. + * + * As hotplug is now excluded via manager_mutex, we can + * simply try to bind. It will succeed or fail depending + * on @gcwq's current state. Try it and adjust + * %WORKER_UNBOUND accordingly. + */ + if (worker_maybe_bind_and_lock(worker)) + worker->flags &= ~WORKER_UNBOUND; + else + worker->flags |= WORKER_UNBOUND; + + ret = true; + } + pool->flags &= ~POOL_MANAGE_WORKERS; /* -- cgit v0.10.2 From f08dea734844aa42ec57c229b0b73b3d7d21f810 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 10 Sep 2012 12:01:05 +0200 Subject: USB: ftdi_sio: do not claim CDC ACM function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Microchip vid:pid 04d8:000a is used for their CDC ACM demo firmware application. This is a device with a single function conforming to the CDC ACM specification and with the intention of demonstrating CDC ACM class firmware and driver interaction. The demo is used on a number of development boards, and may also be used unmodified by vendors using Microchip hardware. Some vendors have re-used this vid:pid for other types of firmware, emulating FTDI chips. Attempting to continue to support such devices without breaking class based applications that by matching on interface class/subclass/proto being ff/ff/00. I have no information about the actual device or interface descriptors, but this will at least make the proper CDC ACM devices work again. Anyone having details of the offending device's descriptors should update this entry with the details. Reported-by: Florian Wöhrl Reported-by: Xiaofan Chen Cc: stable Cc: Alan Cox Cc: Bruno Thomsen Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index e2fa788..f906b3a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -805,7 +805,9 @@ static struct usb_device_id id_table_combined [] = { .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(ADI_VID, ADI_GNICEPLUS_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, - { USB_DEVICE(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID) }, + { USB_DEVICE_AND_INTERFACE_INFO(MICROCHIP_VID, MICROCHIP_USB_BOARD_PID, + USB_CLASS_VENDOR_SPEC, + USB_SUBCLASS_VENDOR_SPEC, 0x00) }, { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) }, { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 9bcaf9c..41fe582 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -542,7 +542,10 @@ /* * Microchip Technology, Inc. * - * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are also used by: + * MICROCHIP_VID (0x04D8) and MICROCHIP_USB_BOARD_PID (0x000A) are + * used by single function CDC ACM class based firmware demo + * applications. The VID/PID has also been used in firmware + * emulating FTDI serial chips by: * Hornby Elite - Digital Command Control Console * http://www.hornby.com/hornby-dcc/controllers/ */ -- cgit v0.10.2 From 8a0961482698290713d14d7755d9280397804487 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 5 Sep 2012 11:49:21 +0200 Subject: brcmsmac: fix mismatch in number of custom regulatory rules The driver provides the cfg80211 regulatory framework with a set of custom rules. However, there was a mismatch in number of rules and the actual rules provided. This resulted in setting an invalid power level: ieee80211 phy0: brcms_ops_config: change channel 13 ieee80211 phy0: brcms_ops_config: Error setting power_level (8758364) Closer look in cfg80211 regulatory blurb showed following bogus rule: cfg80211: 0 KHz - -60446948 KHz @ 875836468 KHz), (875836468 mBi, 875836468 mBm) Cc: Seth Forshee Reviewed-by: Piotr Haber Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Reviewed-by: Seth Forshee Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index 7ed7d75..64a48f0 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -77,7 +77,7 @@ NL80211_RRF_NO_IBSS) static const struct ieee80211_regdomain brcms_regdom_x2 = { - .n_reg_rules = 7, + .n_reg_rules = 6, .alpha2 = "X2", .reg_rules = { BRCM_2GHZ_2412_2462, -- cgit v0.10.2 From 74673db99ca3c09d34ea479f684522ceedb65eb9 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Sat, 8 Sep 2012 15:24:17 +0200 Subject: ath9k: make PA linearization optional, disabled by default and fix checks Some checks for PA linearization support checked ATH9K_HW_CAP_PAPRD and some used the EEPROM ops, leading to issues in tx power handling, since those two can be out of sync. Disable the feature by default, since it has been reported that it can cause damage to the rx path under some circumstances. It can now be enabled for testing via debugfs. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 2588848..d066f25 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -2982,6 +2982,10 @@ static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah, case EEP_RX_MASK: return pBase->txrxMask & 0xf; case EEP_PAPRD: + if (AR_SREV_9462(ah)) + return false; + if (!ah->config.enable_paprd); + return false; return !!(pBase->featureEnable & BIT(5)); case EEP_CHAIN_MASK_REDUCE: return (pBase->miscConfiguration >> 0x3) & 0x1; diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index 68b643c..c8ef301 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -1577,6 +1577,8 @@ int ath9k_init_debug(struct ath_hw *ah) sc->debug.debugfs_phy, sc, &fops_tx_chainmask); debugfs_create_file("disable_ani", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_disable_ani); + debugfs_create_bool("paprd", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, + &sc->sc_ah->config.enable_paprd); debugfs_create_file("regidx", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_regidx); debugfs_create_file("regval", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 48af401..4faf0a3 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -2497,10 +2497,6 @@ int ath9k_hw_fill_cap_info(struct ath_hw *ah) pCap->rx_status_len = sizeof(struct ar9003_rxs); pCap->tx_desc_len = sizeof(struct ar9003_txc); pCap->txs_len = sizeof(struct ar9003_txs); - if (!ah->config.paprd_disable && - ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && - !AR_SREV_9462(ah)) - pCap->hw_caps |= ATH9K_HW_CAP_PAPRD; } else { pCap->tx_desc_len = sizeof(struct ath_desc); if (AR_SREV_9280_20(ah)) diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 6599a75..de6968f 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -236,7 +236,6 @@ enum ath9k_hw_caps { ATH9K_HW_CAP_LDPC = BIT(6), ATH9K_HW_CAP_FASTCLOCK = BIT(7), ATH9K_HW_CAP_SGI_20 = BIT(8), - ATH9K_HW_CAP_PAPRD = BIT(9), ATH9K_HW_CAP_ANT_DIV_COMB = BIT(10), ATH9K_HW_CAP_2GHZ = BIT(11), ATH9K_HW_CAP_5GHZ = BIT(12), @@ -287,12 +286,12 @@ struct ath9k_ops_config { u8 pcie_clock_req; u32 pcie_waen; u8 analog_shiftreg; - u8 paprd_disable; u32 ofdm_trig_low; u32 ofdm_trig_high; u32 cck_trig_high; u32 cck_trig_low; u32 enable_ani; + u32 enable_paprd; int serialize_regmode; bool rx_intr_mitigation; bool tx_intr_mitigation; diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index 825a29c..7b88b9c 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -423,7 +423,7 @@ set_timer: cal_interval = min(cal_interval, (u32)short_cal_interval); mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); - if ((sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_PAPRD) && ah->caldata) { + if (ah->eep_ops->get_eeprom(ah, EEP_PAPRD) && ah->caldata) { if (!ah->caldata->paprd_done) ieee80211_queue_work(sc->hw, &sc->paprd_work); else if (!ah->paprd_table_write_done) -- cgit v0.10.2 From 4abd044af91057f7ea661a0f10c00a9673beef6b Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Mon, 10 Sep 2012 10:05:26 +0100 Subject: brcm80211: fix missing allocation failure check Check for oobirq_entry allocation failure to avoid NULL pointer dereferencing. Signed-off-by: Colin Ian King Acked-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 49765d3..7c4ee72 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -638,6 +638,8 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev) oobirq_entry = kzalloc(sizeof(struct brcmf_sdio_oobirq), GFP_KERNEL); + if (!oobirq_entry) + return -ENOMEM; oobirq_entry->irq = res->start; oobirq_entry->flags = res->flags & IRQF_TRIGGER_MASK; list_add_tail(&oobirq_entry->list, &oobirq_lh); -- cgit v0.10.2 From 2120c52da6fe741454a60644018ad2a6abd957ac Mon Sep 17 00:00:00 2001 From: Lennart Sorensen Date: Fri, 7 Sep 2012 12:14:02 +0000 Subject: sierra_net: Endianess bug fix. I discovered I couldn't get sierra_net to work on a powerpc. Turns out the firmware attribute check assumes the system is little endian and hence fails because the attributes is a 16 bit value. Signed-off-by: Len Sorensen Signed-off-by: David S. Miller diff --git a/drivers/net/usb/sierra_net.c b/drivers/net/usb/sierra_net.c index 7be49ea..8e22417 100644 --- a/drivers/net/usb/sierra_net.c +++ b/drivers/net/usb/sierra_net.c @@ -656,7 +656,7 @@ static int sierra_net_get_fw_attr(struct usbnet *dev, u16 *datap) return -EIO; } - *datap = *attrdata; + *datap = le16_to_cpu(*attrdata); kfree(attrdata); return result; -- cgit v0.10.2 From 974a3b0f9f05b748fe11f1afc31efc32aa5160cb Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Sun, 9 Sep 2012 11:54:16 +0200 Subject: drm/i915: set the right gen3 flip_done mode also at resume Currently we've only frobbed this bit at irq_init time, but did not restore it at resume time. Move it to the gen3 clock gating function to fix this. Notice while reading through code. Cc: stable@vger.kernel.org (for 3.5 only) Reviewed-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_irq.c b/drivers/gpu/drm/i915/i915_irq.c index 8a38285..5249640 100644 --- a/drivers/gpu/drm/i915/i915_irq.c +++ b/drivers/gpu/drm/i915/i915_irq.c @@ -2700,9 +2700,6 @@ void intel_irq_init(struct drm_device *dev) dev->driver->irq_handler = i8xx_irq_handler; dev->driver->irq_uninstall = i8xx_irq_uninstall; } else if (INTEL_INFO(dev)->gen == 3) { - /* IIR "flip pending" means done if this bit is set */ - I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); - dev->driver->irq_preinstall = i915_irq_preinstall; dev->driver->irq_postinstall = i915_irq_postinstall; dev->driver->irq_uninstall = i915_irq_uninstall; diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 1881c8c..ba8a27b 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -3672,6 +3672,9 @@ static void gen3_init_clock_gating(struct drm_device *dev) if (IS_PINEVIEW(dev)) I915_WRITE(ECOSKPD, _MASKED_BIT_ENABLE(ECO_GATING_CX_ONLY)); + + /* IIR "flip pending" means done if this bit is set */ + I915_WRITE(ECOSKPD, _MASKED_BIT_DISABLE(ECO_FLIP_DONE)); } static void i85x_init_clock_gating(struct drm_device *dev) -- cgit v0.10.2 From 566f26aa705609d05940289036ab914c8a3be707 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Sun, 9 Sep 2012 18:38:27 +0000 Subject: caif: move the dereference below the NULL test The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/net/caif/cfsrvl.c b/net/caif/cfsrvl.c index dd485f6..ba217e9 100644 --- a/net/caif/cfsrvl.c +++ b/net/caif/cfsrvl.c @@ -211,9 +211,10 @@ void caif_client_register_refcnt(struct cflayer *adapt_layer, void (*put)(struct cflayer *lyr)) { struct cfsrvl *service; - service = container_of(adapt_layer->dn, struct cfsrvl, layer); - WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL); + if (WARN_ON(adapt_layer == NULL || adapt_layer->dn == NULL)) + return; + service = container_of(adapt_layer->dn, struct cfsrvl, layer); service->hold = hold; service->put = put; } -- cgit v0.10.2 From 0b836ddde177bdd5790ade83772860940bd481ea Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Sep 2012 14:06:58 +0200 Subject: ixp4xx_hss: fix build failure due to missing linux/module.h inclusion Commit 36a1211970193ce215de50ed1e4e1272bc814df1 (netprio_cgroup.h: dont include module.h from other includes) made the following build error on ixp4xx_hss pop up: CC [M] drivers/net/wan/ixp4xx_hss.o drivers/net/wan/ixp4xx_hss.c:1412:20: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1413:25: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1414:21: error: expected ';', ',' or ')' before string constant drivers/net/wan/ixp4xx_hss.c:1415:19: error: expected ';', ',' or ')' before string constant make[8]: *** [drivers/net/wan/ixp4xx_hss.o] Error 1 This was previously hidden because ixp4xx_hss includes linux/hdlc.h which includes linux/netdevice.h which includes linux/netprio_cgroup.h which used to include linux/module.h. The real issue was actually present since the initial commit that added this driver since it uses macros from linux/module.h without including this file. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index aaaca9a..3f575af 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -10,6 +10,7 @@ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include #include #include #include -- cgit v0.10.2 From 1c463e57b32e3b6a3250fe75d1d56cb598d664e6 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 10 Sep 2012 09:13:07 -0700 Subject: net: fix net/core/sock.c build error Fix net/core/sock.c build error when CONFIG_INET is not enabled: net/built-in.o: In function `sock_edemux': (.text+0xd396): undefined reference to `inet_twsk_put' Signed-off-by: Randy Dunlap Signed-off-by: David S. Miller diff --git a/net/core/sock.c b/net/core/sock.c index 7f64467..3057920 100644 --- a/net/core/sock.c +++ b/net/core/sock.c @@ -1525,9 +1525,11 @@ void sock_edemux(struct sk_buff *skb) { struct sock *sk = skb->sk; +#ifdef CONFIG_INET if (sk->sk_state == TCP_TIME_WAIT) inet_twsk_put(inet_twsk(sk)); else +#endif sock_put(sk); } EXPORT_SYMBOL(sock_edemux); -- cgit v0.10.2 From 6a44886899ef8cc396e230e492e6a56a883889f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Mon, 10 Sep 2012 22:17:34 +0200 Subject: USB: cdc-wdm: fix wdm_find_device* return value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit A logic error made the wdm_find_device* functions return a bogus pointer into static data instead of the intended NULL no matching device was found. Cc: stable # v3.4+ Cc: Oliver Neukum Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 65a55ab..5f0cb41 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -109,12 +109,14 @@ static struct usb_driver wdm_driver; /* return intfdata if we own the interface, else look up intf in the list */ static struct wdm_device *wdm_find_device(struct usb_interface *intf) { - struct wdm_device *desc = NULL; + struct wdm_device *desc; spin_lock(&wdm_device_list_lock); list_for_each_entry(desc, &wdm_device_list, device_list) if (desc->intf == intf) - break; + goto found; + desc = NULL; +found: spin_unlock(&wdm_device_list_lock); return desc; @@ -122,12 +124,14 @@ static struct wdm_device *wdm_find_device(struct usb_interface *intf) static struct wdm_device *wdm_find_device_by_minor(int minor) { - struct wdm_device *desc = NULL; + struct wdm_device *desc; spin_lock(&wdm_device_list_lock); list_for_each_entry(desc, &wdm_device_list, device_list) if (desc->intf->minor == minor) - break; + goto found; + desc = NULL; +found: spin_unlock(&wdm_device_list_lock); return desc; -- cgit v0.10.2 From abf02cfc179bb4bd30d05f582d61b3b8f429b813 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 10 Sep 2012 21:22:11 +0200 Subject: staging: r8712u: fix bug in r8712_recv_indicatepkt() 64bit arches have a buggy r8712u driver, let's fix it. skb->tail must be set properly or network stack behavior is undefined. Addresses https://bugzilla.redhat.com/show_bug.cgi?id=847525 Addresses https://bugzilla.kernel.org/show_bug.cgi?id=45071 Signed-off-by: Eric Dumazet Cc: Dave Jones Cc: stable [2.6.37+] Acked-by: Larry Finger Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/rtl8712/recv_linux.c b/drivers/staging/rtl8712/recv_linux.c index 0e26d5f..495ee12 100644 --- a/drivers/staging/rtl8712/recv_linux.c +++ b/drivers/staging/rtl8712/recv_linux.c @@ -117,13 +117,8 @@ void r8712_recv_indicatepkt(struct _adapter *padapter, if (skb == NULL) goto _recv_indicatepkt_drop; skb->data = precv_frame->u.hdr.rx_data; -#ifdef NET_SKBUFF_DATA_USES_OFFSET - skb->tail = (sk_buff_data_t)(precv_frame->u.hdr.rx_tail - - precv_frame->u.hdr.rx_head); -#else - skb->tail = (sk_buff_data_t)precv_frame->u.hdr.rx_tail; -#endif skb->len = precv_frame->u.hdr.len; + skb_set_tail_pointer(skb, skb->len); if ((pattrib->tcpchk_valid == 1) && (pattrib->tcp_chkrpt == 1)) skb->ip_summed = CHECKSUM_UNNECESSARY; else -- cgit v0.10.2 From 3d037774b42ed677f699b1dce7d548d55f4e4c2b Mon Sep 17 00:00:00 2001 From: Pavankumar Kondeti Date: Fri, 7 Sep 2012 11:23:28 +0530 Subject: EHCI: Update qTD next pointer in QH overlay region during unlink There is a possibility of QH overlay region having reference to a stale qTD pointer during unlink. Consider an endpoint having two pending qTD before unlink process begins. The endpoint's QH queue looks like this. qTD1 --> qTD2 --> Dummy To unlink qTD2, QH is removed from asynchronous list and Asynchronous Advance Doorbell is programmed. The qTD1's next qTD pointer is set to qTD2'2 next qTD pointer and qTD2 is retired upon controller's doorbell interrupt. If QH's current qTD pointer points to qTD1, transfer overlay region still have reference to qTD2. But qtD2 is just unlinked and freed. This may cause EHCI system error. Fix this by updating qTD next pointer in QH overlay region with the qTD next pointer of the current qTD. Signed-off-by: Pavankumar Kondeti Acked-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 9bc39ca..4b66374 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -128,9 +128,17 @@ qh_refresh (struct ehci_hcd *ehci, struct ehci_qh *qh) else { qtd = list_entry (qh->qtd_list.next, struct ehci_qtd, qtd_list); - /* first qtd may already be partially processed */ - if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) + /* + * first qtd may already be partially processed. + * If we come here during unlink, the QH overlay region + * might have reference to the just unlinked qtd. The + * qtd is updated in qh_completions(). Update the QH + * overlay here. + */ + if (cpu_to_hc32(ehci, qtd->qtd_dma) == qh->hw->hw_current) { + qh->hw->hw_qtd_next = qtd->hw_next; qtd = NULL; + } } if (qtd) -- cgit v0.10.2 From 0b0d7b62bed81a76dd2b3f12ba6a33eb144a1df6 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Wed, 5 Sep 2012 16:48:53 -0500 Subject: drm/omap: update for interlaced 'struct omap_video_timings' was updated w/ a 'bool interlaced'. Without a matching update in omap_connector, this field could have undefined values from the stack, which isn't quite ideal. Update the fxns to convert omapdss<->drm timings structs, and zero-init 'struct omap_video_timings' when it is declared on stack to avoid issues like this in the future. Signed-off-by: Rob Clark Reviewed-by: Sumit Semwal Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c index 5e2856c..5f4a89b 100644 --- a/drivers/staging/omapdrm/omap_connector.c +++ b/drivers/staging/omapdrm/omap_connector.c @@ -48,13 +48,10 @@ static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, mode->vsync_end = mode->vsync_start + timings->vsw; mode->vtotal = mode->vsync_end + timings->vbp; - /* note: whether or not it is interlaced, +/- h/vsync, etc, - * which should be set in the mode flags, is not exposed in - * the omap_video_timings struct.. but hdmi driver tracks - * those separately so all we have to have to set the mode - * is the way to recover these timings values, and the - * omap_dss_driver would do the rest. - */ + mode->flags = 0; + + if (timings->interlace) + mode->flags |= DRM_MODE_FLAG_INTERLACE; } static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, @@ -71,6 +68,8 @@ static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, timings->vfp = mode->vsync_start - mode->vdisplay; timings->vsw = mode->vsync_end - mode->vsync_start; timings->vbp = mode->vtotal - mode->vsync_end; + + timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); } static void omap_connector_dpms(struct drm_connector *connector, int mode) @@ -187,7 +186,7 @@ static int omap_connector_get_modes(struct drm_connector *connector) } } else { struct drm_display_mode *mode = drm_mode_create(dev); - struct omap_video_timings timings; + struct omap_video_timings timings = {0}; dssdrv->get_timings(dssdev, &timings); @@ -291,7 +290,7 @@ void omap_connector_mode_set(struct drm_connector *connector, struct omap_connector *omap_connector = to_omap_connector(connector); struct omap_dss_device *dssdev = omap_connector->dssdev; struct omap_dss_driver *dssdrv = dssdev->driver; - struct omap_video_timings timings; + struct omap_video_timings timings = {0}; copy_timings_drm_to_omap(&timings, mode); -- cgit v0.10.2 From 94254edc9c5b4e864767c97bfa0e4ccff2ecb5e5 Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Fri, 7 Sep 2012 12:59:45 -0500 Subject: drm/omap: add more new timings fields Without these, DVI is broken. Signed-off-by: Rob Clark Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/staging/omapdrm/omap_connector.c b/drivers/staging/omapdrm/omap_connector.c index 5f4a89b..55e9c86 100644 --- a/drivers/staging/omapdrm/omap_connector.c +++ b/drivers/staging/omapdrm/omap_connector.c @@ -52,6 +52,16 @@ static inline void copy_timings_omap_to_drm(struct drm_display_mode *mode, if (timings->interlace) mode->flags |= DRM_MODE_FLAG_INTERLACE; + + if (timings->hsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PHSYNC; + else + mode->flags |= DRM_MODE_FLAG_NHSYNC; + + if (timings->vsync_level == OMAPDSS_SIG_ACTIVE_HIGH) + mode->flags |= DRM_MODE_FLAG_PVSYNC; + else + mode->flags |= DRM_MODE_FLAG_NVSYNC; } static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, @@ -70,6 +80,20 @@ static inline void copy_timings_drm_to_omap(struct omap_video_timings *timings, timings->vbp = mode->vtotal - mode->vsync_end; timings->interlace = !!(mode->flags & DRM_MODE_FLAG_INTERLACE); + + if (mode->flags & DRM_MODE_FLAG_PHSYNC) + timings->hsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->hsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + if (mode->flags & DRM_MODE_FLAG_PVSYNC) + timings->vsync_level = OMAPDSS_SIG_ACTIVE_HIGH; + else + timings->vsync_level = OMAPDSS_SIG_ACTIVE_LOW; + + timings->data_pclk_edge = OMAPDSS_DRIVE_SIG_RISING_EDGE; + timings->de_level = OMAPDSS_SIG_ACTIVE_HIGH; + timings->sync_pclk_edge = OMAPDSS_DRIVE_SIG_OPPOSITE_EDGES; } static void omap_connector_dpms(struct drm_connector *connector, int mode) -- cgit v0.10.2 From 6895f97e15895625e03c95df904d92befdac7118 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Thu, 6 Sep 2012 22:11:25 +0100 Subject: kbuild: add symbol prefix arg to kallsyms Commit 1f2bfbd00e466ff3489b2ca5cc75b1cccd14c123 ("kbuild: link of vmlinux moved to a script") introduced in v3.5-rc1 broke kallsyms on architectures which have symbol prefixes. The --symbol-prefix argument used to be added to the KALLSYMS command line from the architecture Makefile, however this isn't picked up by the new scripts/link-vmlinux.sh. This resulted in symbols like kallsyms_addresses being added which weren't correctly overriding the weak symbols such as _kallsyms_addresses. These could then trigger BUG_ONs in kallsyms code. This is fixed by removing the KALLSYMS addition from the architecture Makefile, and using CONFIG_SYMBOL_PREFIX in the link-vmlinux.sh script to determine whether to add the --symbol-prefix argument. Signed-off-by: James Hogan Signed-off-by: Bob Liu diff --git a/arch/blackfin/Makefile b/arch/blackfin/Makefile index d3d7e64..66cf000 100644 --- a/arch/blackfin/Makefile +++ b/arch/blackfin/Makefile @@ -20,7 +20,6 @@ endif KBUILD_AFLAGS += $(call cc-option,-mno-fdpic) KBUILD_CFLAGS_MODULE += -mlong-calls LDFLAGS += -m elf32bfin -KALLSYMS += --symbol-prefix=_ KBUILD_DEFCONFIG := BF537-STAMP_defconfig diff --git a/scripts/link-vmlinux.sh b/scripts/link-vmlinux.sh index 4629038..df48dda 100644 --- a/scripts/link-vmlinux.sh +++ b/scripts/link-vmlinux.sh @@ -74,8 +74,13 @@ kallsyms() info KSYM ${2} local kallsymopt; + if [ -n "${CONFIG_SYMBOL_PREFIX}" ]; then + kallsymopt="${kallsymopt} \ + --symbol-prefix=${CONFIG_SYMBOL_PREFIX}" + fi + if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then - kallsymopt=--all-symbols + kallsymopt="${kallsymopt} --all-symbols" fi local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \ -- cgit v0.10.2 From 9b2f4cb65f7083cde86553cd56d6c2878e04932a Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 11 Sep 2012 12:05:45 +0800 Subject: crypto: authenc - Fix crash with zero-length assoc data The authenc code doesn't deal with zero-length associated data correctly and ends up constructing a zero-length sg entry which causes a crash when it's fed into the crypto system. This patch fixes this by avoiding the code-path that triggers the SG construction if we have no associated data. This isn't the most optimal fix as it means that we'll end up using the fallback code-path even when we could still execute the digest function. However, this isn't a big deal as nobody but the test path would supply zero-length associated data. Reported-by: Romain Francoise Signed-off-by: Herbert Xu Tested-by: Romain Francoise diff --git a/crypto/authenc.c b/crypto/authenc.c index 5ef7ba6..d0583a4 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -336,7 +336,7 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv, cryptlen += ivsize; } - if (sg_is_last(assoc)) { + if (req->assoclen && sg_is_last(assoc)) { authenc_ahash_fn = crypto_authenc_ahash; sg_init_table(asg, 2); sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset); @@ -490,7 +490,7 @@ static int crypto_authenc_iverify(struct aead_request *req, u8 *iv, cryptlen += ivsize; } - if (sg_is_last(assoc)) { + if (req->assoclen && sg_is_last(assoc)) { authenc_ahash_fn = crypto_authenc_ahash; sg_init_table(asg, 2); sg_set_page(asg, sg_page(assoc), assoc->length, assoc->offset); -- cgit v0.10.2 From b48d6f8bed430922f78f648d1f73f7c1591e472c Mon Sep 17 00:00:00 2001 From: Pierre Sauter Date: Mon, 10 Sep 2012 07:02:59 +0000 Subject: net: qmi_wwan: fix Gobi device probing for un2430 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit HP un2430 is a Gobi 3000 device. It was mistakenly treated as Gobi 1000 in patch b9f90eb2740203ff2592efe640409ad48335d1c2. I own this device and qmi_wwan works again with this fix. Signed-off-by: Pierre Sauter Acked-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index adfab3f..17b8f3e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -398,7 +398,6 @@ static const struct usb_device_id products[] = { /* 4. Gobi 1000 devices */ {QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ {QMI_GOBI1K_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ - {QMI_GOBI1K_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ {QMI_GOBI1K_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */ {QMI_GOBI1K_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */ @@ -440,6 +439,7 @@ static const struct usb_device_id products[] = { {QMI_GOBI_DEVICE(0x16d8, 0x8002)}, /* CMDTech Gobi 2000 Modem device (VU922) */ {QMI_GOBI_DEVICE(0x05c6, 0x9205)}, /* Gobi 2000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9013)}, /* Sierra Wireless Gobi 3000 Modem device (MC8355) */ + {QMI_GOBI_DEVICE(0x03f0, 0x371d)}, /* HP un2430 Mobile Broadband Module */ {QMI_GOBI_DEVICE(0x1199, 0x9015)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x9019)}, /* Sierra Wireless Gobi 3000 Modem device */ {QMI_GOBI_DEVICE(0x1199, 0x901b)}, /* Sierra Wireless MC7770 */ -- cgit v0.10.2 From 912bfe76528c287bc4812521b8d53366954b39a5 Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 19 Aug 2012 14:05:59 -0300 Subject: ARM: clk-imx25: Fix SSI clock registration SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index fdd8cc8..4431a62 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -222,10 +222,8 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[lcdc_ipg], "ipg", "imx-fb.0"); clk_register_clkdev(clk[lcdc_ahb], "ahb", "imx-fb.0"); clk_register_clkdev(clk[wdt_ipg], NULL, "imx2-wdt.0"); - clk_register_clkdev(clk[ssi1_ipg_per], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi2_ipg_per], "per", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_ipg], "ipg", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_ipg], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_ipg], NULL, "imx-ssi.1"); clk_register_clkdev(clk[esdhc1_ipg_per], "per", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ipg], "ipg", "sdhci-esdhc-imx25.0"); clk_register_clkdev(clk[esdhc1_ahb], "ahb", "sdhci-esdhc-imx25.0"); -- cgit v0.10.2 From 48540058612786d365602f3324ed97f9071092de Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Mon, 20 Aug 2012 09:39:22 -0300 Subject: ARM: clk-imx35: Fix SSI clock registration SSI block has two types of clock: ipg: bus clock, the clock needed for accessing registers. per: peripheral clock, the clock needed for generating the bit rate. Currently SSI driver only supports slave mode and only need to handle the ipg clock, because the peripheral clock comes from the master codec. Only register the ipg clock and do not register the peripheral clock for ssi. Signed-off-by: Fabio Estevam Tested-by: Mark Brown Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org diff --git a/arch/arm/mach-imx/clk-imx35.c b/arch/arm/mach-imx/clk-imx35.c index c6422fb..65fb8bc 100644 --- a/arch/arm/mach-imx/clk-imx35.c +++ b/arch/arm/mach-imx/clk-imx35.c @@ -230,10 +230,8 @@ int __init mx35_clocks_init() clk_register_clkdev(clk[ipu_gate], NULL, "mx3_sdc_fb"); clk_register_clkdev(clk[owire_gate], NULL, "mxc_w1"); clk_register_clkdev(clk[sdma_gate], NULL, "imx35-sdma"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.0"); - clk_register_clkdev(clk[ssi1_div_post], "per", "imx-ssi.0"); - clk_register_clkdev(clk[ipg], "ipg", "imx-ssi.1"); - clk_register_clkdev(clk[ssi2_div_post], "per", "imx-ssi.1"); + clk_register_clkdev(clk[ssi1_gate], NULL, "imx-ssi.0"); + clk_register_clkdev(clk[ssi2_gate], NULL, "imx-ssi.1"); /* i.mx35 has the i.mx21 type uart */ clk_register_clkdev(clk[uart1_gate], "per", "imx21-uart.0"); clk_register_clkdev(clk[ipg], "ipg", "imx21-uart.0"); -- cgit v0.10.2 From 81cb324675eec592ab8f3038f980c074fbf7fb9b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 11 Sep 2012 14:12:43 +0300 Subject: ALSA: compress_core: fix open flags test in snd_compr_open() O_RDONLY is zero so the original test (f->f_flags & O_RDONLY) is always false and it will never do compress capture. The test for O_WRONLY is also slightly off. The original test would consider "->flags = (O_WRONLY | O_RDWR)" as write only instead of rejecting it as invalid. I've also removed the pr_err() because that could flood dmesg. Signed-off-by: Dan Carpenter Signed-off-by: Takashi Iwai diff --git a/sound/core/compress_offload.c b/sound/core/compress_offload.c index ec2118d..eb60cb8 100644 --- a/sound/core/compress_offload.c +++ b/sound/core/compress_offload.c @@ -80,14 +80,12 @@ static int snd_compr_open(struct inode *inode, struct file *f) int maj = imajor(inode); int ret; - if (f->f_flags & O_WRONLY) + if ((f->f_flags & O_ACCMODE) == O_WRONLY) dirn = SND_COMPRESS_PLAYBACK; - else if (f->f_flags & O_RDONLY) + else if ((f->f_flags & O_ACCMODE) == O_RDONLY) dirn = SND_COMPRESS_CAPTURE; - else { - pr_err("invalid direction\n"); + else return -EINVAL; - } if (maj == snd_major) compr = snd_lookup_minor_data(iminor(inode), -- cgit v0.10.2 From c302d6133c094bda7a7ce94eac5b50c018a7ca7b Mon Sep 17 00:00:00 2001 From: Catalin Iacob Date: Sun, 9 Sep 2012 21:41:11 +0000 Subject: ALSA: hda_intel: add position_fix quirk for Asus K53E Commit c20c5a841cbe47f5b7812b57bd25397497e5fbc0 changed some chipsets to default to POS_FIX_COMBO so they now use POS_FIX_LPIB instead of POS_FIX_POSBUF. Since then I've been getting artifacts on playback, including repeated sounds on my Asus laptop. My hardware is Cougar Point which the commit log of c20c5a841cbe47f5b7812b57bd25397497e5fbc0 mentions as tested so POS_FIX_COMBO probably works in general but apparently it doesn't on Asus K53E therefore the need for the quirk. Signed-off-by: Catalin Iacob Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 60882c6..228cdf9 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2701,6 +2701,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), + SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB), SND_PCI_QUIRK(0x1297, 0x3166, "Shuttle", POS_FIX_LPIB), -- cgit v0.10.2 From 75c5da279e06577190abba52cabf0dc2a56edb97 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Mon, 10 Sep 2012 21:58:29 +0200 Subject: drm/i915: fix up the IBX transcoder B check This has been added in commit de9a35abb3b343a25065449234e47a76c4f3454a Author: Daniel Vetter Date: Tue Jun 5 11:03:40 2012 +0200 drm/i915: assert that the IBX port transcoder select w/a is implemented Unfortunately I've failed to notice that these checks are not just called for the port that is about to be disabled, but for all (which makes sense for an assert ...), and the WARN missfired when disabling another pipe than the one with the dp port. Hence also check whether the port is actually disabled. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=54688 Reviewed-by: Paulo Zanoni Signed-Off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 2dfa6cf..bc2ad34 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1376,7 +1376,8 @@ static void assert_pch_dp_disabled(struct drm_i915_private *dev_priv, "PCH DP (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); - WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT), + WARN(HAS_PCH_IBX(dev_priv->dev) && (val & DP_PORT_EN) == 0 + && (val & DP_PIPEB_SELECT), "IBX PCH dp port still using transcoder B\n"); } @@ -1388,7 +1389,8 @@ static void assert_pch_hdmi_disabled(struct drm_i915_private *dev_priv, "PCH HDMI (0x%08x) enabled on transcoder %c, should be disabled\n", reg, pipe_name(pipe)); - WARN(HAS_PCH_IBX(dev_priv->dev) && (val & SDVO_PIPE_B_SELECT), + WARN(HAS_PCH_IBX(dev_priv->dev) && (val & PORT_ENABLE) == 0 + && (val & SDVO_PIPE_B_SELECT), "IBX PCH hdmi port still using transcoder B\n"); } -- cgit v0.10.2 From ba9edaa468869a8cea242a411066b0f490751798 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Tue, 11 Sep 2012 09:40:31 +0200 Subject: USB: option: replace ZTE K5006-Z entry with vendor class rule MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix the ZTE K5006-Z entry so that it actually matches anything commit f1b5c997 USB: option: add ZTE K5006-Z added a device specific entry assuming that the device would use class/subclass/proto == ff/ff/ff like other ZTE devices. It turns out that ZTE has started using vendor specific subclass and protocol codes: T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=19d2 ProdID=1018 Rev= 0.00 S: Manufacturer=ZTE,Incorporated S: Product=ZTE LTE Technologies MSM S: SerialNumber=MF821Vxxxxxxx C:* #Ifs= 5 Cfg#= 1 Atr=c0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=86 Prot=10 Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=02 Prot=05 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=02 Prot=01 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=06 Prot=00 Driver=qmi_wwan E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms We do not have any information on how ZTE intend to use these codes, but let us assume for now that the 3 sets matching serial functions in the K5006-Z always will identify a serial function in a ZTE device. Cc: Thomas Schäfer Cc: stable Signed-off-by: Bjørn Mork Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index cc40f47..5ce88d1 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -886,8 +886,6 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1010, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&net_intf4_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1012, 0xff, 0xff, 0xff) }, - { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1018, 0xff, 0xff, 0xff), - .driver_info = (kernel_ulong_t)&net_intf3_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1057, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1058, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x1059, 0xff, 0xff, 0xff) }, @@ -1092,6 +1090,10 @@ static const struct usb_device_id option_ids[] = { .driver_info = (kernel_ulong_t)&zte_ad3812_z_blacklist }, { USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MC2716, 0xff, 0xff, 0xff), .driver_info = (kernel_ulong_t)&zte_mc2716_z_blacklist }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x01) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x02, 0x05) }, + { USB_VENDOR_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0xff, 0x86, 0x10) }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) }, { USB_DEVICE(ALINK_VENDOR_ID, DLINK_PRODUCT_DWM_652_U5) }, /* Yes, ALINK_VENDOR_ID */ -- cgit v0.10.2 From 7b281ee026552f10862b617a2a51acf49c829554 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 11 Sep 2012 15:38:32 -0400 Subject: NFS: fsync() must exit with an error if page writeback failed We need to ensure that if the call to filemap_write_and_wait_range() fails, then we report that error back to the application. Signed-off-by: Trond Myklebust diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 75d6d0a..6a7fcab 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -287,10 +287,12 @@ nfs_file_fsync(struct file *file, loff_t start, loff_t end, int datasync) struct inode *inode = file->f_path.dentry->d_inode; ret = filemap_write_and_wait_range(inode->i_mapping, start, end); + if (ret != 0) + goto out; mutex_lock(&inode->i_mutex); ret = nfs_file_fsync_commit(file, start, end, datasync); mutex_unlock(&inode->i_mutex); - +out: return ret; } diff --git a/fs/nfs/nfs4file.c b/fs/nfs/nfs4file.c index acb65e7..eb5eb8e 100644 --- a/fs/nfs/nfs4file.c +++ b/fs/nfs/nfs4file.c @@ -96,13 +96,15 @@ nfs4_file_fsync(struct file *file, loff_t start, loff_t end, int datasync) struct inode *inode = file->f_path.dentry->d_inode; ret = filemap_write_and_wait_range(inode->i_mapping, start, end); + if (ret != 0) + goto out; mutex_lock(&inode->i_mutex); ret = nfs_file_fsync_commit(file, start, end, datasync); if (!ret && !datasync) /* application has asked for meta-data sync */ ret = pnfs_layoutcommit_inode(inode, true); mutex_unlock(&inode->i_mutex); - +out: return ret; } -- cgit v0.10.2 From bdfc87f7d1e253e0a61e2fc6a75ea9d76f7fc03a Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 11 Sep 2012 13:11:12 +0000 Subject: net-sched: sch_cbq: avoid infinite loop Its possible to setup a bad cbq configuration leading to an infinite loop in cbq_classify() DEV_OUT=eth0 ICMP="match ip protocol 1 0xff" U32="protocol ip u32" DST="match ip dst" tc qdisc add dev $DEV_OUT root handle 1: cbq avpkt 1000 \ bandwidth 100mbit tc class add dev $DEV_OUT parent 1: classid 1:1 cbq \ rate 512kbit allot 1500 prio 5 bounded isolated tc filter add dev $DEV_OUT parent 1: prio 3 $U32 \ $ICMP $DST 192.168.3.234 flowid 1: Reported-by: Denys Fedoryschenko Tested-by: Denys Fedoryschenko Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 6aabd77..564b9fc 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -250,10 +250,11 @@ cbq_classify(struct sk_buff *skb, struct Qdisc *sch, int *qerr) else if ((cl = defmap[res.classid & TC_PRIO_MAX]) == NULL) cl = defmap[TC_PRIO_BESTEFFORT]; - if (cl == NULL || cl->level >= head->level) + if (cl == NULL) goto fallback; } - + if (cl->level >= head->level) + goto fallback; #ifdef CONFIG_NET_CLS_ACT switch (result) { case TC_ACT_QUEUED: -- cgit v0.10.2 From 73d7c119255615a26070f9d6cdb722a166a29015 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 19 Jun 2012 08:00:00 -0700 Subject: hwmon: (twl4030-madc-hwmon) Initialize uninitialized structure elements twl4030_madc_conversion uses do_avg and type structure elements of twl4030_madc_request. Initialize structure to avoid random operation. Fix for: Coverity CID 200794 Uninitialized scalar variable. Cc: Keerthy Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Acked-by: Keerthy diff --git a/drivers/hwmon/twl4030-madc-hwmon.c b/drivers/hwmon/twl4030-madc-hwmon.c index 0018c7d..1a174f0 100644 --- a/drivers/hwmon/twl4030-madc-hwmon.c +++ b/drivers/hwmon/twl4030-madc-hwmon.c @@ -44,12 +44,13 @@ static ssize_t madc_read(struct device *dev, struct device_attribute *devattr, char *buf) { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct twl4030_madc_request req; + struct twl4030_madc_request req = { + .channels = 1 << attr->index, + .method = TWL4030_MADC_SW2, + .type = TWL4030_MADC_WAIT, + }; long val; - req.channels = (1 << attr->index); - req.method = TWL4030_MADC_SW2; - req.func_cb = NULL; val = twl4030_madc_conversion(&req); if (val < 0) return val; -- cgit v0.10.2 From eeb0074f36d1ab0729d06f1c56add9c7799679e2 Mon Sep 17 00:00:00 2001 From: Fernando Guzman Lugo Date: Wed, 29 Aug 2012 19:24:52 -0500 Subject: rpmsg: fix dma_free_coherent dev parameter dma_alloc/free_coherent APIs requires the platform specific remoteproc device as the device parameter. We are passing vdev->dev.parent to the dma_free_coherent function which is the generic rproc device and it is wrong, it has to be vdev->dev.parent->parent instead, same as when we call dma_alloc_coherent function. Signed-off-by: Fernando Guzman Lugo Signed-off-by: Ohad Ben-Cohen diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c index 590cfaf..1859f71 100644 --- a/drivers/rpmsg/virtio_rpmsg_bus.c +++ b/drivers/rpmsg/virtio_rpmsg_bus.c @@ -1008,8 +1008,8 @@ static int rpmsg_probe(struct virtio_device *vdev) return 0; free_coherent: - dma_free_coherent(vdev->dev.parent, RPMSG_TOTAL_BUF_SPACE, bufs_va, - vrp->bufs_dma); + dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE, + bufs_va, vrp->bufs_dma); vqs_del: vdev->config->del_vqs(vrp->vdev); free_vrp: @@ -1043,7 +1043,7 @@ static void __devexit rpmsg_remove(struct virtio_device *vdev) vdev->config->del_vqs(vrp->vdev); - dma_free_coherent(vdev->dev.parent, RPMSG_TOTAL_BUF_SPACE, + dma_free_coherent(vdev->dev.parent->parent, RPMSG_TOTAL_BUF_SPACE, vrp->rbufs, vrp->bufs_dma); kfree(vrp); -- cgit v0.10.2 From 080b98e9ab30734bda2f1b8b33cd55a4c4ef406a Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 11 Sep 2012 08:22:14 -0700 Subject: hwmon: (ina2xx) Fix word size register read and write operations The driver uses be16_to_cpu and cpu_to_be16 to convert data in SMBus word operations from chip to host byte order. However, the data passed from and to the SMBus word API functions is in host byte order, not in chip byte order. Conversion should therefore use swab16 instead of be16 to change the byte order. Replace driver internal word conversion functions with SMBus API functions to solve the problem. Signed-off-by: Guenter Roeck Cc: stable@vger.kernel.org # 3.5+ Acked-by: Jean Delvare diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c index 7f3f4a3..6021482 100644 --- a/drivers/hwmon/ina2xx.c +++ b/drivers/hwmon/ina2xx.c @@ -69,22 +69,6 @@ struct ina2xx_data { u16 regs[INA2XX_MAX_REGISTERS]; }; -int ina2xx_read_word(struct i2c_client *client, int reg) -{ - int val = i2c_smbus_read_word_data(client, reg); - if (unlikely(val < 0)) { - dev_dbg(&client->dev, - "Failed to read register: %d\n", reg); - return val; - } - return be16_to_cpu(val); -} - -void ina2xx_write_word(struct i2c_client *client, int reg, int data) -{ - i2c_smbus_write_word_data(client, reg, cpu_to_be16(data)); -} - static struct ina2xx_data *ina2xx_update_device(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); @@ -102,7 +86,7 @@ static struct ina2xx_data *ina2xx_update_device(struct device *dev) /* Read all registers */ for (i = 0; i < data->registers; i++) { - int rv = ina2xx_read_word(client, i); + int rv = i2c_smbus_read_word_swapped(client, i); if (rv < 0) { ret = ERR_PTR(rv); goto abort; @@ -279,22 +263,26 @@ static int ina2xx_probe(struct i2c_client *client, switch (data->kind) { case ina219: /* device configuration */ - ina2xx_write_word(client, INA2XX_CONFIG, INA219_CONFIG_DEFAULT); + i2c_smbus_write_word_swapped(client, INA2XX_CONFIG, + INA219_CONFIG_DEFAULT); /* set current LSB to 1mA, shunt is in uOhms */ /* (equation 13 in datasheet) */ - ina2xx_write_word(client, INA2XX_CALIBRATION, 40960000 / shunt); + i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION, + 40960000 / shunt); dev_info(&client->dev, "power monitor INA219 (Rshunt = %li uOhm)\n", shunt); data->registers = INA219_REGISTERS; break; case ina226: /* device configuration */ - ina2xx_write_word(client, INA2XX_CONFIG, INA226_CONFIG_DEFAULT); + i2c_smbus_write_word_swapped(client, INA2XX_CONFIG, + INA226_CONFIG_DEFAULT); /* set current LSB to 1mA, shunt is in uOhms */ /* (equation 1 in datasheet)*/ - ina2xx_write_word(client, INA2XX_CALIBRATION, 5120000 / shunt); + i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION, + 5120000 / shunt); dev_info(&client->dev, "power monitor INA226 (Rshunt = %li uOhm)\n", shunt); data->registers = INA226_REGISTERS; -- cgit v0.10.2 From 3737e2be505d872bf2b3c1cd4151b2d2b413d7b5 Mon Sep 17 00:00:00 2001 From: Matteo Frigo Date: Wed, 12 Sep 2012 10:12:06 -0400 Subject: ALSA: ice1724: Use linear scale for AK4396 volume control. The AK4396 DAC has a linear-scale attentuator, but sound/pci/ice1712/prodigy_hifi.c used a log scale instead, which is not quite right. This patch restores the correct scale, borrowing from the ak4396 code in sound/pci/oxygen/oxygen.c. Signed-off-by: Matteo Frigo Cc: Signed-off-by: Takashi Iwai diff --git a/sound/pci/ice1712/prodigy_hifi.c b/sound/pci/ice1712/prodigy_hifi.c index 764cc93..075d5aa 100644 --- a/sound/pci/ice1712/prodigy_hifi.c +++ b/sound/pci/ice1712/prodigy_hifi.c @@ -297,6 +297,7 @@ static int ak4396_dac_vol_put(struct snd_kcontrol *kcontrol, struct snd_ctl_elem } static const DECLARE_TLV_DB_SCALE(db_scale_wm_dac, -12700, 100, 1); +static const DECLARE_TLV_DB_LINEAR(ak4396_db_scale, TLV_DB_GAIN_MUTE, 0); static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = { { @@ -307,7 +308,7 @@ static struct snd_kcontrol_new prodigy_hd2_controls[] __devinitdata = { .info = ak4396_dac_vol_info, .get = ak4396_dac_vol_get, .put = ak4396_dac_vol_put, - .tlv = { .p = db_scale_wm_dac }, + .tlv = { .p = ak4396_db_scale }, }, }; -- cgit v0.10.2 From 16af511a666827eaf5802144f09e2fb7b0942c99 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 12 Sep 2012 02:04:53 +0000 Subject: netfilter: log: Fix log-level processing auto75914331@hushmail.com reports that iptables does not correctly output the KERN_. $IPTABLES -A RULE_0_in -j LOG --log-level notice --log-prefix "DENY in: " result with linux 3.6-rc5 Sep 12 06:37:29 xxxxx kernel: <5>DENY in: IN=eth0 OUT= MAC=....... result with linux 3.5.3 and older: Sep 9 10:43:01 xxxxx kernel: DENY in: IN=eth0 OUT= MAC...... commit 04d2c8c83d0 ("printk: convert the format for KERN_ to a 2 byte pattern") updated the syslog header style but did not update netfilter uses. Do so. Use KERN_SOH and string concatenation instead of "%c" KERN_SOH_ASCII as suggested by Eric Dumazet. Signed-off-by: Joe Perches cc: auto75914331@hushmail.com Signed-off-by: Pablo Neira Ayuso diff --git a/net/bridge/netfilter/ebt_log.c b/net/bridge/netfilter/ebt_log.c index f88ee53..92de5e5 100644 --- a/net/bridge/netfilter/ebt_log.c +++ b/net/bridge/netfilter/ebt_log.c @@ -80,7 +80,7 @@ ebt_log_packet(u_int8_t pf, unsigned int hooknum, unsigned int bitmask; spin_lock_bh(&ebt_log_lock); - printk("<%c>%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x", + printk(KERN_SOH "%c%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x", '0' + loginfo->u.log.level, prefix, in ? in->name : "", out ? out->name : "", eth_hdr(skb)->h_source, eth_hdr(skb)->h_dest, diff --git a/net/netfilter/xt_LOG.c b/net/netfilter/xt_LOG.c index 2a4f969..91e9af4 100644 --- a/net/netfilter/xt_LOG.c +++ b/net/netfilter/xt_LOG.c @@ -443,8 +443,8 @@ log_packet_common(struct sbuff *m, const struct nf_loginfo *loginfo, const char *prefix) { - sb_add(m, "<%d>%sIN=%s OUT=%s ", loginfo->u.log.level, - prefix, + sb_add(m, KERN_SOH "%c%sIN=%s OUT=%s ", + '0' + loginfo->u.log.level, prefix, in ? in->name : "", out ? out->name : ""); #ifdef CONFIG_BRIDGE_NETFILTER -- cgit v0.10.2 From 2fc136eecd0c647a6b13fcd00d0c41a1a28f35a5 Mon Sep 17 00:00:00 2001 From: Stefano Stabellini Date: Wed, 12 Sep 2012 12:44:30 +0100 Subject: xen/m2p: do not reuse kmap_op->dev_bus_addr If the caller passes a valid kmap_op to m2p_add_override, we use kmap_op->dev_bus_addr to store the original mfn, but dev_bus_addr is part of the interface with Xen and if we are batching the hypercalls it might not have been written by the hypervisor yet. That means that later on Xen will write to it and we'll think that the original mfn is actually what Xen has written to it. Rather than "stealing" struct members from kmap_op, keep using page->index to store the original mfn and add another parameter to m2p_remove_override to get the corresponding kmap_op instead. It is now responsibility of the caller to keep track of which kmap_op corresponds to a particular page in the m2p_override (gntdev, the only user of this interface that passes a valid kmap_op, is already doing that). CC: stable@kernel.org Reported-and-Tested-By: Sander Eikelenboom Signed-off-by: Stefano Stabellini Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h index 93971e8..472b9b7 100644 --- a/arch/x86/include/asm/xen/page.h +++ b/arch/x86/include/asm/xen/page.h @@ -51,7 +51,8 @@ extern unsigned long set_phys_range_identity(unsigned long pfn_s, extern int m2p_add_override(unsigned long mfn, struct page *page, struct gnttab_map_grant_ref *kmap_op); -extern int m2p_remove_override(struct page *page, bool clear_pte); +extern int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op); extern struct page *m2p_find_override(unsigned long mfn); extern unsigned long m2p_find_override_pfn(unsigned long mfn, unsigned long pfn); diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c index 76ba0e9..72213da 100644 --- a/arch/x86/xen/p2m.c +++ b/arch/x86/xen/p2m.c @@ -828,9 +828,6 @@ int m2p_add_override(unsigned long mfn, struct page *page, xen_mc_issue(PARAVIRT_LAZY_MMU); } - /* let's use dev_bus_addr to record the old mfn instead */ - kmap_op->dev_bus_addr = page->index; - page->index = (unsigned long) kmap_op; } spin_lock_irqsave(&m2p_override_lock, flags); list_add(&page->lru, &m2p_overrides[mfn_hash(mfn)]); @@ -857,7 +854,8 @@ int m2p_add_override(unsigned long mfn, struct page *page, return 0; } EXPORT_SYMBOL_GPL(m2p_add_override); -int m2p_remove_override(struct page *page, bool clear_pte) +int m2p_remove_override(struct page *page, + struct gnttab_map_grant_ref *kmap_op) { unsigned long flags; unsigned long mfn; @@ -887,10 +885,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) WARN_ON(!PagePrivate(page)); ClearPagePrivate(page); - if (clear_pte) { - struct gnttab_map_grant_ref *map_op = - (struct gnttab_map_grant_ref *) page->index; - set_phys_to_machine(pfn, map_op->dev_bus_addr); + set_phys_to_machine(pfn, page->index); + if (kmap_op != NULL) { if (!PageHighMem(page)) { struct multicall_space mcs; struct gnttab_unmap_grant_ref *unmap_op; @@ -902,13 +898,13 @@ int m2p_remove_override(struct page *page, bool clear_pte) * issued. In this case handle is going to -1 because * it hasn't been modified yet. */ - if (map_op->handle == -1) + if (kmap_op->handle == -1) xen_mc_flush(); /* - * Now if map_op->handle is negative it means that the + * Now if kmap_op->handle is negative it means that the * hypercall actually returned an error. */ - if (map_op->handle == GNTST_general_error) { + if (kmap_op->handle == GNTST_general_error) { printk(KERN_WARNING "m2p_remove_override: " "pfn %lx mfn %lx, failed to modify kernel mappings", pfn, mfn); @@ -918,8 +914,8 @@ int m2p_remove_override(struct page *page, bool clear_pte) mcs = xen_mc_entry( sizeof(struct gnttab_unmap_grant_ref)); unmap_op = mcs.args; - unmap_op->host_addr = map_op->host_addr; - unmap_op->handle = map_op->handle; + unmap_op->host_addr = kmap_op->host_addr; + unmap_op->handle = kmap_op->handle; unmap_op->dev_bus_addr = 0; MULTI_grant_table_op(mcs.mc, @@ -930,10 +926,9 @@ int m2p_remove_override(struct page *page, bool clear_pte) set_pte_at(&init_mm, address, ptep, pfn_pte(pfn, PAGE_KERNEL)); __flush_tlb_single(address); - map_op->host_addr = 0; + kmap_op->host_addr = 0; } - } else - set_phys_to_machine(pfn, page->index); + } /* p2m(m2p(mfn)) == FOREIGN_FRAME(mfn): the mfn is already present * somewhere in this domain, even before being added to the diff --git a/drivers/block/xen-blkback/blkback.c b/drivers/block/xen-blkback/blkback.c index 73f196c..c6decb9 100644 --- a/drivers/block/xen-blkback/blkback.c +++ b/drivers/block/xen-blkback/blkback.c @@ -337,7 +337,7 @@ static void xen_blkbk_unmap(struct pending_req *req) invcount++; } - ret = gnttab_unmap_refs(unmap, pages, invcount, false); + ret = gnttab_unmap_refs(unmap, NULL, pages, invcount); BUG_ON(ret); } diff --git a/drivers/xen/gntdev.c b/drivers/xen/gntdev.c index 1ffd03b..7f12416 100644 --- a/drivers/xen/gntdev.c +++ b/drivers/xen/gntdev.c @@ -314,8 +314,9 @@ static int __unmap_grant_pages(struct grant_map *map, int offset, int pages) } } - err = gnttab_unmap_refs(map->unmap_ops + offset, map->pages + offset, - pages, true); + err = gnttab_unmap_refs(map->unmap_ops + offset, + use_ptemod ? map->kmap_ops + offset : NULL, map->pages + offset, + pages); if (err) return err; diff --git a/drivers/xen/grant-table.c b/drivers/xen/grant-table.c index 0bfc1ef..0067266 100644 --- a/drivers/xen/grant-table.c +++ b/drivers/xen/grant-table.c @@ -870,7 +870,8 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, EXPORT_SYMBOL_GPL(gnttab_map_refs); int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, - struct page **pages, unsigned int count, bool clear_pte) + struct gnttab_map_grant_ref *kmap_ops, + struct page **pages, unsigned int count) { int i, ret; bool lazy = false; @@ -888,7 +889,8 @@ int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, } for (i = 0; i < count; i++) { - ret = m2p_remove_override(pages[i], clear_pte); + ret = m2p_remove_override(pages[i], kmap_ops ? + &kmap_ops[i] : NULL); if (ret) return ret; } diff --git a/include/xen/grant_table.h b/include/xen/grant_table.h index 11e27c3..f19fff8 100644 --- a/include/xen/grant_table.h +++ b/include/xen/grant_table.h @@ -187,6 +187,7 @@ int gnttab_map_refs(struct gnttab_map_grant_ref *map_ops, struct gnttab_map_grant_ref *kmap_ops, struct page **pages, unsigned int count); int gnttab_unmap_refs(struct gnttab_unmap_grant_ref *unmap_ops, - struct page **pages, unsigned int count, bool clear_pte); + struct gnttab_map_grant_ref *kunmap_ops, + struct page **pages, unsigned int count); #endif /* __ASM_GNTTAB_H__ */ -- cgit v0.10.2 From b3aafe80c83097403d2b5edccfc440fac3d5f028 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Aug 2012 09:42:31 +0200 Subject: i2c: pnx: Fix bit definitions The I2C Control Register bits RFDAIE and RFFIE were mixed up. In addition to this fix, this patch adds the missing bit DRSIE for completeness. Signed-off-by: Roland Stigge Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index 5d54416..b36e21f 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -48,8 +48,9 @@ enum { mcntrl_afie = 0x00000002, mcntrl_naie = 0x00000004, mcntrl_drmie = 0x00000008, - mcntrl_daie = 0x00000020, - mcntrl_rffie = 0x00000040, + mcntrl_drsie = 0x00000010, + mcntrl_rffie = 0x00000020, + mcntrl_daie = 0x00000040, mcntrl_tffie = 0x00000080, mcntrl_reset = 0x00000100, mcntrl_cdbmode = 0x00000400, -- cgit v0.10.2 From c076ada4e4aaf45e1a31ad6de7c6cce36081e045 Mon Sep 17 00:00:00 2001 From: Roland Stigge Date: Wed, 8 Aug 2012 09:42:32 +0200 Subject: i2c: pnx: Fix read transactions of >= 2 bytes On transactions with n>=2 bytes, the controller actually wrongly clocks in n+1 bytes. This is caused by the (wrong) assumption that RFE in the Status Register is 1 iff there is no byte already ordered (via a dummy TX byte). This lead to the implementation of synchronized byte ordering, e.g.: Dummy-TX - RX - Dummy-TX - RX - ... But since RFE actually stays high after some Dummy-TX, it rather looks like: Dummy-TX - Dummy-TX - RX - Dummy-TX - RX - (RX) The last RX byte is clocked in by the bus controller, but ignored by the kernel when filling the userspace buffer. This patch fixes the issue by asking for RX via Dummy-TX asynchronously. Introducing a separate counter for TX bytes. Signed-off-by: Roland Stigge Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c index b36e21f..8488bdd 100644 --- a/drivers/i2c/busses/i2c-pnx.c +++ b/drivers/i2c/busses/i2c-pnx.c @@ -291,31 +291,37 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data) * or we didn't 'ask' for it yet. */ if (ioread32(I2C_REG_STS(alg_data)) & mstatus_rfe) { - dev_dbg(&alg_data->adapter.dev, - "%s(): Write dummy data to fill Rx-fifo...\n", - __func__); + /* 'Asking' is done asynchronously, e.g. dummy TX of several + * bytes is done before the first actual RX arrives in FIFO. + * Therefore, ordered bytes (via TX) are counted separately. + */ + if (alg_data->mif.order) { + dev_dbg(&alg_data->adapter.dev, + "%s(): Write dummy data to fill Rx-fifo...\n", + __func__); - if (alg_data->mif.len == 1) { - /* Last byte, do not acknowledge next rcv. */ - val |= stop_bit; + if (alg_data->mif.order == 1) { + /* Last byte, do not acknowledge next rcv. */ + val |= stop_bit; + + /* + * Enable interrupt RFDAIE (data in Rx fifo), + * and disable DRMIE (need data for Tx) + */ + ctl = ioread32(I2C_REG_CTL(alg_data)); + ctl |= mcntrl_rffie | mcntrl_daie; + ctl &= ~mcntrl_drmie; + iowrite32(ctl, I2C_REG_CTL(alg_data)); + } /* - * Enable interrupt RFDAIE (data in Rx fifo), - * and disable DRMIE (need data for Tx) + * Now we'll 'ask' for data: + * For each byte we want to receive, we must + * write a (dummy) byte to the Tx-FIFO. */ - ctl = ioread32(I2C_REG_CTL(alg_data)); - ctl |= mcntrl_rffie | mcntrl_daie; - ctl &= ~mcntrl_drmie; - iowrite32(ctl, I2C_REG_CTL(alg_data)); + iowrite32(val, I2C_REG_TX(alg_data)); + alg_data->mif.order--; } - - /* - * Now we'll 'ask' for data: - * For each byte we want to receive, we must - * write a (dummy) byte to the Tx-FIFO. - */ - iowrite32(val, I2C_REG_TX(alg_data)); - return 0; } @@ -515,6 +521,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) alg_data->mif.buf = pmsg->buf; alg_data->mif.len = pmsg->len; + alg_data->mif.order = pmsg->len; alg_data->mif.mode = (pmsg->flags & I2C_M_RD) ? I2C_SMBUS_READ : I2C_SMBUS_WRITE; alg_data->mif.ret = 0; @@ -567,6 +574,7 @@ i2c_pnx_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num) /* Cleanup to be sure... */ alg_data->mif.buf = NULL; alg_data->mif.len = 0; + alg_data->mif.order = 0; dev_dbg(&alg_data->adapter.dev, "%s(): exiting, stat = %x\n", __func__, ioread32(I2C_REG_STS(alg_data))); diff --git a/include/linux/i2c-pnx.h b/include/linux/i2c-pnx.h index 1bc74af..49ed17f 100644 --- a/include/linux/i2c-pnx.h +++ b/include/linux/i2c-pnx.h @@ -22,6 +22,7 @@ struct i2c_pnx_mif { struct timer_list timer; /* Timeout */ u8 * buf; /* Data buffer */ int len; /* Length of data buffer */ + int order; /* RX Bytes to order via TX */ }; struct i2c_pnx_algo_data { -- cgit v0.10.2 From 72ee734a6716aac5aaf336da70a811e308d2a84e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Sat, 8 Sep 2012 17:28:06 +0200 Subject: i2c: mxs: correctly setup speed for non devicetree Commit cd4f2d4 (i2c: mxs: Set I2C timing registers for mxs-i2c) only covered the case for devicetree and made platform_data based boards bail out with -EINVAL. Correctly support the latter one, too. Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c index 088c5c1..51f05b8 100644 --- a/drivers/i2c/busses/i2c-mxs.c +++ b/drivers/i2c/busses/i2c-mxs.c @@ -365,10 +365,6 @@ static int mxs_i2c_get_ofdata(struct mxs_i2c_dev *i2c) struct device_node *node = dev->of_node; int ret; - if (!node) - return -EINVAL; - - i2c->speed = &mxs_i2c_95kHz_config; ret = of_property_read_u32(node, "clock-frequency", &speed); if (ret) dev_warn(dev, "No I2C speed selected, using 100kHz\n"); @@ -419,10 +415,13 @@ static int __devinit mxs_i2c_probe(struct platform_device *pdev) return err; i2c->dev = dev; + i2c->speed = &mxs_i2c_95kHz_config; - err = mxs_i2c_get_ofdata(i2c); - if (err) - return err; + if (dev->of_node) { + err = mxs_i2c_get_ofdata(i2c); + if (err) + return err; + } platform_set_drvdata(pdev, i2c); -- cgit v0.10.2 From 66172c09938bfc4efdcf9b5e0246a85b9b76dd54 Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Wed, 29 Aug 2012 15:14:33 +0000 Subject: IPoIB: Fix memory leak in the neigh table deletion flow If the neighbours hash table is empty when unloading the module, then ipoib_flush_neighs(), the cleanup routine, isn't called and the memory used for the hash table itself leaked. To fix this, ipoib_flush_neighs() is allways called, and another completion object is added to signal when the table is freed. Once invoked, ipoib_flush_neighs() flushes all the neighbours (if there are any), calls the the hash table RCU free routine, which now signals completion of the deletion process, and waits for the last neighbour to be freed. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index ca43901..e6bbeae 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -262,7 +262,10 @@ struct ipoib_ethtool_st { u16 max_coalesced_frames; }; +struct ipoib_neigh_table; + struct ipoib_neigh_hash { + struct ipoib_neigh_table *ntbl; struct ipoib_neigh __rcu **buckets; struct rcu_head rcu; u32 mask; @@ -274,6 +277,7 @@ struct ipoib_neigh_table { rwlock_t rwlock; atomic_t entries; struct completion flushed; + struct completion deleted; }; /* diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 3e2085a..72c1fc2 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -1095,6 +1095,7 @@ static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) htbl->mask = (size - 1); htbl->buckets = buckets; ntbl->htbl = htbl; + htbl->ntbl = ntbl; atomic_set(&ntbl->entries, 0); /* start garbage collection */ @@ -1111,9 +1112,11 @@ static void neigh_hash_free_rcu(struct rcu_head *head) struct ipoib_neigh_hash, rcu); struct ipoib_neigh __rcu **buckets = htbl->buckets; + struct ipoib_neigh_table *ntbl = htbl->ntbl; kfree(buckets); kfree(htbl); + complete(&ntbl->deleted); } void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) @@ -1164,7 +1167,9 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) struct ipoib_neigh_table *ntbl = &priv->ntbl; struct ipoib_neigh_hash *htbl; unsigned long flags; - int i; + int i, wait_flushed = 0; + + init_completion(&priv->ntbl.flushed); write_lock_bh(&ntbl->rwlock); @@ -1173,6 +1178,10 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) if (!htbl) goto out_unlock; + wait_flushed = atomic_read(&priv->ntbl.entries); + if (!wait_flushed) + goto free_htbl; + for (i = 0; i < htbl->size; i++) { struct ipoib_neigh *neigh; struct ipoib_neigh __rcu **np = &htbl->buckets[i]; @@ -1190,11 +1199,14 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) } } +free_htbl: rcu_assign_pointer(ntbl->htbl, NULL); call_rcu(&htbl->rcu, neigh_hash_free_rcu); out_unlock: write_unlock_bh(&ntbl->rwlock); + if (wait_flushed) + wait_for_completion(&priv->ntbl.flushed); } static void ipoib_neigh_hash_uninit(struct net_device *dev) @@ -1203,7 +1215,7 @@ static void ipoib_neigh_hash_uninit(struct net_device *dev) int stopped; ipoib_dbg(priv, "ipoib_neigh_hash_uninit\n"); - init_completion(&priv->ntbl.flushed); + init_completion(&priv->ntbl.deleted); set_bit(IPOIB_NEIGH_TBL_FLUSH, &priv->flags); /* Stop GC if called at init fail need to cancel work */ @@ -1211,10 +1223,9 @@ static void ipoib_neigh_hash_uninit(struct net_device *dev) if (!stopped) cancel_delayed_work(&priv->neigh_reap_task); - if (atomic_read(&priv->ntbl.entries)) { - ipoib_flush_neighs(priv); - wait_for_completion(&priv->ntbl.flushed); - } + ipoib_flush_neighs(priv); + + wait_for_completion(&priv->ntbl.deleted); } -- cgit v0.10.2 From b5120a6e11e90d98d8a752545ac60bfa1ea95f1a Mon Sep 17 00:00:00 2001 From: Shlomo Pongratz Date: Wed, 29 Aug 2012 15:14:34 +0000 Subject: IPoIB: Fix AB-BA deadlock when deleting neighbours Lockdep points out a circular locking dependency betwwen the ipoib device priv spinlock (priv->lock) and the neighbour table rwlock (ntbl->rwlock). In the normal path, ie neigbour garbage collection task, the neigh table rwlock is taken first and then if the neighbour needs to be deleted, priv->lock is taken. However in some error paths, such as in ipoib_cm_handle_tx_wc(), priv->lock is taken first and then ipoib_neigh_free routine is called which in turn takes the neighbour table ntbl->rwlock. The solution is to get rid the neigh table rwlock completely and use only priv->lock. Signed-off-by: Shlomo Pongratz Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib.h b/drivers/infiniband/ulp/ipoib/ipoib.h index e6bbeae..0af216d 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib.h +++ b/drivers/infiniband/ulp/ipoib/ipoib.h @@ -274,7 +274,6 @@ struct ipoib_neigh_hash { struct ipoib_neigh_table { struct ipoib_neigh_hash __rcu *htbl; - rwlock_t rwlock; atomic_t entries; struct completion flushed; struct completion deleted; diff --git a/drivers/infiniband/ulp/ipoib/ipoib_main.c b/drivers/infiniband/ulp/ipoib/ipoib_main.c index 72c1fc2..1e19b5a 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_main.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_main.c @@ -546,15 +546,15 @@ static void neigh_add_path(struct sk_buff *skb, u8 *daddr, struct ipoib_neigh *neigh; unsigned long flags; + spin_lock_irqsave(&priv->lock, flags); neigh = ipoib_neigh_alloc(daddr, dev); if (!neigh) { + spin_unlock_irqrestore(&priv->lock, flags); ++dev->stats.tx_dropped; dev_kfree_skb_any(skb); return; } - spin_lock_irqsave(&priv->lock, flags); - path = __path_find(dev, daddr + 4); if (!path) { path = path_rec_create(dev, daddr + 4); @@ -863,10 +863,10 @@ static void __ipoib_reap_neigh(struct ipoib_dev_priv *priv) if (test_bit(IPOIB_STOP_NEIGH_GC, &priv->flags)) return; - write_lock_bh(&ntbl->rwlock); + spin_lock_irqsave(&priv->lock, flags); htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) goto out_unlock; @@ -883,16 +883,14 @@ static void __ipoib_reap_neigh(struct ipoib_dev_priv *priv) struct ipoib_neigh __rcu **np = &htbl->buckets[i]; while ((neigh = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) != NULL) { + lockdep_is_held(&priv->lock))) != NULL) { /* was the neigh idle for two GC periods */ if (time_after(neigh_obsolete, neigh->alive)) { rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); /* remove from path/mc list */ - spin_lock_irqsave(&priv->lock, flags); list_del(&neigh->list); - spin_unlock_irqrestore(&priv->lock, flags); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); } else { np = &neigh->hnext; @@ -902,7 +900,7 @@ static void __ipoib_reap_neigh(struct ipoib_dev_priv *priv) } out_unlock: - write_unlock_bh(&ntbl->rwlock); + spin_unlock_irqrestore(&priv->lock, flags); } static void ipoib_reap_neigh(struct work_struct *work) @@ -947,10 +945,8 @@ struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, struct ipoib_neigh *neigh; u32 hash_val; - write_lock_bh(&ntbl->rwlock); - htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) { neigh = NULL; goto out_unlock; @@ -961,10 +957,10 @@ struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, */ hash_val = ipoib_addr_hash(htbl, daddr); for (neigh = rcu_dereference_protected(htbl->buckets[hash_val], - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); neigh != NULL; neigh = rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))) { + lockdep_is_held(&priv->lock))) { if (memcmp(daddr, neigh->daddr, INFINIBAND_ALEN) == 0) { /* found, take one ref on behalf of the caller */ if (!atomic_inc_not_zero(&neigh->refcnt)) { @@ -987,12 +983,11 @@ struct ipoib_neigh *ipoib_neigh_alloc(u8 *daddr, /* put in hash */ rcu_assign_pointer(neigh->hnext, rcu_dereference_protected(htbl->buckets[hash_val], - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); rcu_assign_pointer(htbl->buckets[hash_val], neigh); atomic_inc(&ntbl->entries); out_unlock: - write_unlock_bh(&ntbl->rwlock); return neigh; } @@ -1040,35 +1035,29 @@ void ipoib_neigh_free(struct ipoib_neigh *neigh) struct ipoib_neigh *n; u32 hash_val; - write_lock_bh(&ntbl->rwlock); - htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) - goto out_unlock; + return; hash_val = ipoib_addr_hash(htbl, neigh->daddr); np = &htbl->buckets[hash_val]; for (n = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); n != NULL; n = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) { + lockdep_is_held(&priv->lock))) { if (n == neigh) { /* found */ rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); - goto out_unlock; + return; } else { np = &n->hnext; } } - -out_unlock: - write_unlock_bh(&ntbl->rwlock); - } static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) @@ -1080,7 +1069,6 @@ static int ipoib_neigh_hash_init(struct ipoib_dev_priv *priv) clear_bit(IPOIB_NEIGH_TBL_FLUSH, &priv->flags); ntbl->htbl = NULL; - rwlock_init(&ntbl->rwlock); htbl = kzalloc(sizeof(*htbl), GFP_KERNEL); if (!htbl) return -ENOMEM; @@ -1128,10 +1116,10 @@ void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) int i; /* remove all neigh connected to a given path or mcast */ - write_lock_bh(&ntbl->rwlock); + spin_lock_irqsave(&priv->lock, flags); htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) goto out_unlock; @@ -1141,16 +1129,14 @@ void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) struct ipoib_neigh __rcu **np = &htbl->buckets[i]; while ((neigh = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) != NULL) { + lockdep_is_held(&priv->lock))) != NULL) { /* delete neighs belong to this parent */ if (!memcmp(gid, neigh->daddr + 4, sizeof (union ib_gid))) { rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); /* remove from parent list */ - spin_lock_irqsave(&priv->lock, flags); list_del(&neigh->list); - spin_unlock_irqrestore(&priv->lock, flags); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); } else { np = &neigh->hnext; @@ -1159,7 +1145,7 @@ void ipoib_del_neighs_by_gid(struct net_device *dev, u8 *gid) } } out_unlock: - write_unlock_bh(&ntbl->rwlock); + spin_unlock_irqrestore(&priv->lock, flags); } static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) @@ -1171,10 +1157,10 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) init_completion(&priv->ntbl.flushed); - write_lock_bh(&ntbl->rwlock); + spin_lock_irqsave(&priv->lock, flags); htbl = rcu_dereference_protected(ntbl->htbl, - lockdep_is_held(&ntbl->rwlock)); + lockdep_is_held(&priv->lock)); if (!htbl) goto out_unlock; @@ -1187,14 +1173,12 @@ static void ipoib_flush_neighs(struct ipoib_dev_priv *priv) struct ipoib_neigh __rcu **np = &htbl->buckets[i]; while ((neigh = rcu_dereference_protected(*np, - lockdep_is_held(&ntbl->rwlock))) != NULL) { + lockdep_is_held(&priv->lock))) != NULL) { rcu_assign_pointer(*np, rcu_dereference_protected(neigh->hnext, - lockdep_is_held(&ntbl->rwlock))); + lockdep_is_held(&priv->lock))); /* remove from path/mc list */ - spin_lock_irqsave(&priv->lock, flags); list_del(&neigh->list); - spin_unlock_irqrestore(&priv->lock, flags); call_rcu(&neigh->rcu, ipoib_neigh_reclaim); } } @@ -1204,7 +1188,7 @@ free_htbl: call_rcu(&htbl->rcu, neigh_hash_free_rcu); out_unlock: - write_unlock_bh(&ntbl->rwlock); + spin_unlock_irqrestore(&priv->lock, flags); if (wait_flushed) wait_for_completion(&priv->ntbl.flushed); } diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index 13f4aa7..7536724 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -707,9 +707,7 @@ out: neigh = ipoib_neigh_get(dev, daddr); spin_lock_irqsave(&priv->lock, flags); if (!neigh) { - spin_unlock_irqrestore(&priv->lock, flags); neigh = ipoib_neigh_alloc(daddr, dev); - spin_lock_irqsave(&priv->lock, flags); if (neigh) { kref_get(&mcast->ah->ref); neigh->ah = mcast->ah; -- cgit v0.10.2 From 7f67c38bdcb6d8bce02e10521fbf1618b586319f Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 12 Sep 2012 14:58:00 +0300 Subject: usb: chipidea: udc: fix setup of endpoint maxpacket size This patch changes the setup of the endpoint maxpacket size. All non control endpoints are initialized with an undefined ((unsigned short)~0) maxpacket size. The maxpacket size of Endpoint 0 will be kept at CTRL_PAYLOAD_MAX. Some gadget drivers check for the maxpacket size before they enable the endpoint, which leads to a wrong state in these drivers. Cc: stable Signed-off-by: Michael Grzeschik Acked-by: Felipe Balbi Signed-off-by: Marc Kleine-Budde Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index c7a032a..7801a3f 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1455,7 +1455,12 @@ static int init_eps(struct ci13xxx *ci) mEp->ep.name = mEp->name; mEp->ep.ops = &usb_ep_ops; - mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; + /* + * for ep0: maxP defined in desc, for other + * eps, maxP is set by epautoconfig() called + * by gadget layer + */ + mEp->ep.maxpacket = (unsigned short)~0; INIT_LIST_HEAD(&mEp->qh.queue); mEp->qh.ptr = dma_pool_alloc(ci->qh_pool, GFP_KERNEL, @@ -1475,6 +1480,7 @@ static int init_eps(struct ci13xxx *ci) else ci->ep0in = mEp; + mEp->ep.maxpacket = CTRL_PAYLOAD_MAX; continue; } -- cgit v0.10.2 From c0a48e6c75f2ac190d812bea5fc339696e434c2e Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 12 Sep 2012 14:58:01 +0300 Subject: usb: chipidea: udc: add pullup fuction, needed by the uvc gadget Add function to physicaly enable or disable of pullup connection on the USB-D+ line. The uvc gaget will fail, if this function is not implemented. Cc: stable Signed-off-by: Michael Grzeschik Acked-by: Felipe Balbi Signed-off-by: Marc Kleine-Budde Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 7801a3f..32ee870 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -78,8 +78,7 @@ static inline int ep_to_bit(struct ci13xxx *ci, int n) } /** - * hw_device_state: enables/disables interrupts & starts/stops device (execute - * without interruption) + * hw_device_state: enables/disables interrupts (execute without interruption) * @dma: 0 => disable, !0 => enable and set dma engine * * This function returns an error code @@ -91,9 +90,7 @@ static int hw_device_state(struct ci13xxx *ci, u32 dma) /* interrupt, error, port change, reset, sleep/suspend */ hw_write(ci, OP_USBINTR, ~0, USBi_UI|USBi_UEI|USBi_PCI|USBi_URI|USBi_SLI); - hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); } else { - hw_write(ci, OP_USBCMD, USBCMD_RS, 0); hw_write(ci, OP_USBINTR, ~0, 0); } return 0; @@ -1420,6 +1417,21 @@ static int ci13xxx_vbus_draw(struct usb_gadget *_gadget, unsigned mA) return -ENOTSUPP; } +/* Change Data+ pullup status + * this func is used by usb_gadget_connect/disconnet + */ +static int ci13xxx_pullup(struct usb_gadget *_gadget, int is_on) +{ + struct ci13xxx *ci = container_of(_gadget, struct ci13xxx, gadget); + + if (is_on) + hw_write(ci, OP_USBCMD, USBCMD_RS, USBCMD_RS); + else + hw_write(ci, OP_USBCMD, USBCMD_RS, 0); + + return 0; +} + static int ci13xxx_start(struct usb_gadget *gadget, struct usb_gadget_driver *driver); static int ci13xxx_stop(struct usb_gadget *gadget, @@ -1432,6 +1444,7 @@ static int ci13xxx_stop(struct usb_gadget *gadget, static const struct usb_gadget_ops usb_gadget_ops = { .vbus_session = ci13xxx_vbus_session, .wakeup = ci13xxx_wakeup, + .pullup = ci13xxx_pullup, .vbus_draw = ci13xxx_vbus_draw, .udc_start = ci13xxx_start, .udc_stop = ci13xxx_stop, -- cgit v0.10.2 From c9d1f947a85e38b6dded469470c95ed62430cb3f Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 12 Sep 2012 14:58:02 +0300 Subject: usb: chipidea: udc: fix error path in udc_start() This patch fixes the error path of udc_start(). Now NULL is used to unset the peripheral with otg_set_peripheral(). Cc: stable Reviewed-by: Richard Zhao Signed-off-by: Marc Kleine-Budde Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 32ee870..3a755e5 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1748,7 +1748,7 @@ static int udc_start(struct ci13xxx *ci) remove_trans: if (!IS_ERR_OR_NULL(ci->transceiver)) { - otg_set_peripheral(ci->transceiver->otg, &ci->gadget); + otg_set_peripheral(ci->transceiver->otg, NULL); if (ci->global_phy) usb_put_phy(ci->transceiver); } -- cgit v0.10.2 From ad6b1b97fe8504957d017cd6e4168cac8903d3f3 Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 12 Sep 2012 14:58:03 +0300 Subject: usb: chipidea: cleanup dma_pool if udc_start() fails If udc_start() fails the qh_pool dma-pool cannot be closed because it's still in use. This patch factors out the dma_pool_free() loop into destroy_eps() and calls it in the error path of udc_start(), too. Cc: stable Reviewed-by: Richard Zhao Signed-off-by: Marc Kleine-Budde Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 3a755e5..2d8b609 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -1503,6 +1503,17 @@ static int init_eps(struct ci13xxx *ci) return retval; } +static void destroy_eps(struct ci13xxx *ci) +{ + int i; + + for (i = 0; i < ci->hw_ep_max; i++) { + struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; + + dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); + } +} + /** * ci13xxx_start: register a gadget driver * @gadget: our gadget @@ -1710,7 +1721,7 @@ static int udc_start(struct ci13xxx *ci) if (ci->platdata->flags & CI13XXX_REQUIRE_TRANSCEIVER) { if (ci->transceiver == NULL) { retval = -ENODEV; - goto free_pools; + goto destroy_eps; } } @@ -1761,6 +1772,8 @@ unreg_device: put_transceiver: if (!IS_ERR_OR_NULL(ci->transceiver) && ci->global_phy) usb_put_phy(ci->transceiver); +destroy_eps: + destroy_eps(ci); free_pools: dma_pool_destroy(ci->td_pool); free_qh_pool: @@ -1775,18 +1788,12 @@ free_qh_pool: */ static void udc_stop(struct ci13xxx *ci) { - int i; - if (ci == NULL) return; usb_del_gadget_udc(&ci->gadget); - for (i = 0; i < ci->hw_ep_max; i++) { - struct ci13xxx_ep *mEp = &ci->ci13xxx_ep[i]; - - dma_pool_free(ci->qh_pool, mEp->qh.ptr, mEp->qh.dma); - } + destroy_eps(ci); dma_pool_destroy(ci->td_pool); dma_pool_destroy(ci->qh_pool); -- cgit v0.10.2 From db89960e50f45274c07dc60926b5a49489b8a7a0 Mon Sep 17 00:00:00 2001 From: Michael Grzeschik Date: Wed, 12 Sep 2012 14:58:04 +0300 Subject: usb: chipidea: udc: don't stall endpoint if request list is empty in isr_tr_complete_low When attaching an imx28 or imx53 in USB gadget mode to a Windows host and starting a rndis connection we see this message every 4-10 seconds: g_ether gadget: high speed config #2: RNDIS Analysis shows that each time this message is printed, the rndis connection is re-establish due to a reset because of a stalled endpoint (ep 0, dir 1). The endpoint is stalled because the reqeust complete bit on that endpoint is set, but in isr_tr_complete_low() the endpoint request list (mEp->qh.queue) is empty. This patch removed this check, because the code doesn't take the following situation into account: The loop over all endpoints in isr_tr_complete_handler() will call ep_nuke() on both ep0/dir0 and ep/dir1 in the first loop. Pending reqeusts will be flushed and completed here. There seems to be a race condition, the request is nuked, but the request complete bit will be set, too. The subsequent check (in ep0/dir1's loop cycle) for endpoint request list (mEp->qh.queue) empty will fail. Both other mainline chipidea drivers (mv_udc_core.c and fsl_udc_core.c) don't have this check. Cc: stable Signed-off-by: Michael Grzeschik Signed-off-by: Marc Kleine-Budde Signed-off-by: Alexander Shishkin Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 2d8b609..d214448 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -771,10 +771,7 @@ __acquires(mEp->lock) { struct ci13xxx_req *mReq, *mReqTemp; struct ci13xxx_ep *mEpTemp = mEp; - int uninitialized_var(retval); - - if (list_empty(&mEp->qh.queue)) - return -EINVAL; + int retval = 0; list_for_each_entry_safe(mReq, mReqTemp, &mEp->qh.queue, queue) { -- cgit v0.10.2 From 022e1d0680c7b4366017393417b8758be5abcee8 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 11 Sep 2012 11:11:13 -0500 Subject: rtlwifi: rtl8192ce: Log message that B_CUT device may not work There are a number of problems that occur for the latest version of the Realtek RTL8188CE device with the in-kernel driver. These include selection of the wrong firmware, and system lockup. A full fix is known, but is too invasive for inclusion in stable. This patch fixes the problem with loading the wrong firmware, and logs a message that the device may not work for kernels 3.6 and older. Signed-off-by: Larry Finger Cc: Stable Cc: Anisse Astier Cc: Li Chaoming Tested-by: Anisse Astier Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h index 04c3aef..2925094 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h @@ -117,6 +117,7 @@ #define CHIP_VER_B BIT(4) #define CHIP_92C_BITMASK BIT(0) +#define CHIP_UNKNOWN BIT(7) #define CHIP_92C_1T2R 0x03 #define CHIP_92C 0x01 #define CHIP_88C 0x00 diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index bd0da7e..dd4bb09 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -994,8 +994,16 @@ static enum version_8192c _rtl92ce_read_chip_version(struct ieee80211_hw *hw) version = (value32 & TYPE_ID) ? VERSION_A_CHIP_92C : VERSION_A_CHIP_88C; } else { - version = (value32 & TYPE_ID) ? VERSION_B_CHIP_92C : - VERSION_B_CHIP_88C; + version = (enum version_8192c) (CHIP_VER_B | + ((value32 & TYPE_ID) ? CHIP_92C_BITMASK : 0) | + ((value32 & VENDOR_ID) ? CHIP_VENDOR_UMC : 0)); + if ((!IS_CHIP_VENDOR_UMC(version)) && (value32 & + CHIP_VER_RTL_MASK)) { + version = (enum version_8192c)(version | + ((((value32 & CHIP_VER_RTL_MASK) == BIT(12)) + ? CHIP_VENDOR_UMC_B_CUT : CHIP_UNKNOWN) | + CHIP_VENDOR_UMC)); + } } switch (version) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c index 3aa927f..7d8f964 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c @@ -162,10 +162,12 @@ int rtl92c_init_sw_vars(struct ieee80211_hw *hw) /* request fw */ if (IS_VENDOR_UMC_A_CUT(rtlhal->version) && - !IS_92C_SERIAL(rtlhal->version)) + !IS_92C_SERIAL(rtlhal->version)) { rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU.bin"; - else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) + } else if (IS_81xxC_VENDOR_UMC_B_CUT(rtlhal->version)) { rtlpriv->cfg->fw_name = "rtlwifi/rtl8192cfwU_B.bin"; + pr_info("****** This B_CUT device may not work with kernels 3.6 and earlier\n"); + } rtlpriv->max_fw_size = 0x4000; pr_info("Using firmware %s\n", rtlpriv->cfg->fw_name); -- cgit v0.10.2 From ed205b361956c96e0d8c09a8c9135a6a79cd9541 Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 11 Sep 2012 21:16:47 +0200 Subject: brcmfmac: fix big endian bug in i-scan. ssid len is 32 bit and needs endian conversion for big endian systems. Cc: stable Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index c36e923..50b5553 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -500,8 +500,10 @@ static void wl_iscan_prep(struct brcmf_scan_params_le *params_le, params_le->active_time = cpu_to_le32(-1); params_le->passive_time = cpu_to_le32(-1); params_le->home_time = cpu_to_le32(-1); - if (ssid && ssid->SSID_len) - memcpy(¶ms_le->ssid_le, ssid, sizeof(struct brcmf_ssid)); + if (ssid && ssid->SSID_len) { + params_le->ssid_le.SSID_len = cpu_to_le32(ssid->SSID_len); + memcpy(¶ms_le->ssid_le.SSID, ssid->SSID, ssid->SSID_len); + } } static s32 -- cgit v0.10.2 From e020a83d0942a5aceac35986500c9834efc8707d Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Tue, 11 Sep 2012 21:16:48 +0200 Subject: brcmfmac: Fix big endian host configuration data. Fixes big endian host configuration parameters. Cc: stable Reviewed-by: Arend Van Spriel Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c index 2621dd3..6f70953 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_common.c @@ -764,8 +764,11 @@ static void brcmf_c_arp_offload_set(struct brcmf_pub *drvr, int arp_mode) { char iovbuf[32]; int retcode; + __le32 arp_mode_le; - brcmf_c_mkiovar("arp_ol", (char *)&arp_mode, 4, iovbuf, sizeof(iovbuf)); + arp_mode_le = cpu_to_le32(arp_mode); + brcmf_c_mkiovar("arp_ol", (char *)&arp_mode_le, 4, iovbuf, + sizeof(iovbuf)); retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); retcode = retcode >= 0 ? 0 : retcode; @@ -781,8 +784,11 @@ static void brcmf_c_arp_offload_enable(struct brcmf_pub *drvr, int arp_enable) { char iovbuf[32]; int retcode; + __le32 arp_enable_le; - brcmf_c_mkiovar("arpoe", (char *)&arp_enable, 4, + arp_enable_le = cpu_to_le32(arp_enable); + + brcmf_c_mkiovar("arpoe", (char *)&arp_enable_le, 4, iovbuf, sizeof(iovbuf)); retcode = brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); @@ -800,10 +806,10 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) char iovbuf[BRCMF_EVENTING_MASK_LEN + 12]; /* Room for "event_msgs" + '\0' + bitvec */ char buf[128], *ptr; - u32 roaming = 1; - uint bcn_timeout = 3; - int scan_assoc_time = 40; - int scan_unassoc_time = 40; + __le32 roaming_le = cpu_to_le32(1); + __le32 bcn_timeout_le = cpu_to_le32(3); + __le32 scan_assoc_time_le = cpu_to_le32(40); + __le32 scan_unassoc_time_le = cpu_to_le32(40); int i; struct brcmf_bus_dcmd *cmdlst; struct list_head *cur, *q; @@ -829,14 +835,14 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) /* Setup timeout if Beacons are lost and roam is off to report link down */ - brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout, 4, iovbuf, + brcmf_c_mkiovar("bcn_timeout", (char *)&bcn_timeout_le, 4, iovbuf, sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); /* Enable/Disable build-in roaming to allowed ext supplicant to take of romaing */ - brcmf_c_mkiovar("roam_off", (char *)&roaming, 4, + brcmf_c_mkiovar("roam_off", (char *)&roaming_le, 4, iovbuf, sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_VAR, iovbuf, sizeof(iovbuf)); @@ -848,9 +854,9 @@ int brcmf_c_preinit_dcmds(struct brcmf_pub *drvr) sizeof(iovbuf)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_CHANNEL_TIME, - (char *)&scan_assoc_time, sizeof(scan_assoc_time)); + (char *)&scan_assoc_time_le, sizeof(scan_assoc_time_le)); brcmf_proto_cdc_set_dcmd(drvr, 0, BRCMF_C_SET_SCAN_UNASSOC_TIME, - (char *)&scan_unassoc_time, sizeof(scan_unassoc_time)); + (char *)&scan_unassoc_time_le, sizeof(scan_unassoc_time_le)); /* Set and enable ARP offload feature */ brcmf_c_arp_offload_set(drvr, BRCMF_ARPOL_MODE); -- cgit v0.10.2 From 1a131458ddf24d3dddb355ce00f32365557c1eed Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:00:38 +0530 Subject: mtip32xx: Add support for new devices Added supported device IDs in pci table Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index a8fddeb..a935f4f 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -4168,7 +4168,13 @@ static void mtip_pci_shutdown(struct pci_dev *pdev) /* Table of device ids supported by this driver. */ static DEFINE_PCI_DEVICE_TABLE(mtip_pci_tbl) = { - { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P320S_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P325M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420H_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P420M_DEVICE_ID) }, + { PCI_DEVICE(PCI_VENDOR_ID_MICRON, P425M_DEVICE_ID) }, { 0 } }; diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index f51fc23..0255d19 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -76,7 +76,13 @@ /* Micron Vendor ID & P320x SSD Device ID */ #define PCI_VENDOR_ID_MICRON 0x1344 -#define P320_DEVICE_ID 0x5150 +#define P320H_DEVICE_ID 0x5150 +#define P320M_DEVICE_ID 0x5151 +#define P320S_DEVICE_ID 0x5152 +#define P325M_DEVICE_ID 0x5153 +#define P420H_DEVICE_ID 0x5160 +#define P420M_DEVICE_ID 0x5161 +#define P425M_DEVICE_ID 0x5163 /* Driver name and version strings */ #define MTIP_DRV_NAME "mtip32xx" -- cgit v0.10.2 From 12a166c919310f4c967d0959b4ed073cced850d7 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:01:36 +0530 Subject: mtip32xx: Handle NCQ commands during the security locked state Return error for NCQ commands when the drive is in security locked state Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index a935f4f..2553c73 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -1148,11 +1148,15 @@ static bool mtip_pause_ncq(struct mtip_port *port, reply = port->rxfis + RX_FIS_D2H_REG; task_file_data = readl(port->mmio+PORT_TFDATA); - if ((task_file_data & 1) || (fis->command == ATA_CMD_SEC_ERASE_UNIT)) + if (fis->command == ATA_CMD_SEC_ERASE_UNIT) + clear_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); + + if ((task_file_data & 1)) return false; if (fis->command == ATA_CMD_SEC_ERASE_PREP) { set_bit(MTIP_PF_SE_ACTIVE_BIT, &port->flags); + set_bit(MTIP_DDF_SEC_LOCK_BIT, &port->dd->dd_flag); port->ic_pause_timer = jiffies; return true; } else if ((fis->command == ATA_CMD_DOWNLOAD_MICRO) && @@ -3619,6 +3623,10 @@ static void mtip_make_request(struct request_queue *queue, struct bio *bio) bio_endio(bio, -ENODATA); return; } + if (unlikely(test_bit(MTIP_DDF_SEC_LOCK_BIT, &dd->dd_flag))) { + bio_endio(bio, -ENODATA); + return; + } } if (unlikely(!bio_has_data(bio))) { diff --git a/drivers/block/mtip32xx/mtip32xx.h b/drivers/block/mtip32xx/mtip32xx.h index 0255d19..18627a1 100644 --- a/drivers/block/mtip32xx/mtip32xx.h +++ b/drivers/block/mtip32xx/mtip32xx.h @@ -137,10 +137,12 @@ enum { MTIP_PF_SVC_THD_STOP_BIT = 8, /* below are bit numbers in 'dd_flag' defined in driver_data */ + MTIP_DDF_SEC_LOCK_BIT = 0, MTIP_DDF_REMOVE_PENDING_BIT = 1, MTIP_DDF_OVER_TEMP_BIT = 2, MTIP_DDF_WRITE_PROTECT_BIT = 3, MTIP_DDF_STOP_IO = ((1 << MTIP_DDF_REMOVE_PENDING_BIT) | \ + (1 << MTIP_DDF_SEC_LOCK_BIT) | \ (1 << MTIP_DDF_OVER_TEMP_BIT) | \ (1 << MTIP_DDF_WRITE_PROTECT_BIT)), -- cgit v0.10.2 From d7c8b945480b3505708c47aad2bca20bd20de2bd Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:02:16 +0530 Subject: mtip32xx: Increase timeout for standby command Increased timeout for standby command to work with larger capacity drives Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 2553c73..cf557a4 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2047,7 +2047,7 @@ static void mtip_set_timeout(struct host_to_dev_fis *fis, unsigned int *timeout) *timeout = 240000; /* 4 minutes */ break; case ATA_CMD_STANDBYNOW1: - *timeout = 10000; /* 10 seconds */ + *timeout = 120000; /* 2 minutes */ break; case 0xF7: case 0xFA: -- cgit v0.10.2 From b62868e50e65e59556b550f745dac9a9a51ff841 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:03:32 +0530 Subject: mtip32xx: Proper reporting of write protect status on big-endian Proper reporting of write protect status on big-endian Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index cf557a4..06bc273 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -3218,8 +3218,8 @@ static int mtip_hw_init(struct driver_data *dd) "Unable to check write protect progress\n"); else dev_info(&dd->pdev->dev, - "Write protect progress: %d%% (%d blocks)\n", - attr242.cur, attr242.data); + "Write protect progress: %u%% (%u blocks)\n", + attr242.cur, le32_to_cpu(attr242.data)); return rv; out3: -- cgit v0.10.2 From 45422e7431f3afa049d07a99a35de8f8ceea6b3c Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:03:56 +0530 Subject: mtip32xx: Change printk to pr_xxxx Changed printk to be compliant with latest style changes Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 06bc273..362ce4a 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -4213,12 +4213,12 @@ static int __init mtip_init(void) { int error; - printk(KERN_INFO MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); + pr_info(MTIP_DRV_NAME " Version " MTIP_DRV_VERSION "\n"); /* Allocate a major block device number to use with this driver. */ error = register_blkdev(0, MTIP_DRV_NAME); if (error <= 0) { - printk(KERN_ERR "Unable to register block device (%d)\n", + pr_err("Unable to register block device (%d)\n", error); return -EBUSY; } @@ -4227,7 +4227,7 @@ static int __init mtip_init(void) if (!dfs_parent) { dfs_parent = debugfs_create_dir("rssd", NULL); if (IS_ERR_OR_NULL(dfs_parent)) { - printk(KERN_WARNING "Error creating debugfs parent\n"); + pr_warn("Error creating debugfs parent\n"); dfs_parent = NULL; } } -- cgit v0.10.2 From ac64e6572d3906c3874175cf5345a37dc7f983f5 Mon Sep 17 00:00:00 2001 From: Asai Thambi S P Date: Wed, 5 Sep 2012 22:04:16 +0530 Subject: mtip32xx: Remove dead code Removed the dead code in mtip_hw_read_registers() and mtip_hw_read_flags(). Reported-by: Coverity Signed-off-by: Asai Thambi S P Signed-off-by: Selvan Mani Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index 362ce4a..e6519e2 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -2592,9 +2592,6 @@ static ssize_t mtip_hw_read_registers(struct file *f, char __user *ubuf, if (!len || size) return 0; - if (size < 0) - return -EINVAL; - size += sprintf(&buf[size], "H/ S ACTive : [ 0x"); for (n = dd->slot_groups-1; n >= 0; n--) @@ -2664,9 +2661,6 @@ static ssize_t mtip_hw_read_flags(struct file *f, char __user *ubuf, if (!len || size) return 0; - if (size < 0) - return -EINVAL; - size += sprintf(&buf[size], "Flag-port : [ %08lX ]\n", dd->port->flags); size += sprintf(&buf[size], "Flag-dd : [ %08lX ]\n", -- cgit v0.10.2 From 97651ea687d3b6a214c32b49f79523db709fba18 Mon Sep 17 00:00:00 2001 From: David Milburn Date: Wed, 12 Sep 2012 14:06:12 -0500 Subject: mtip32xx: fix user_buffer check in exec_drive_command Current user_buffer check is incorrect and causes hdparm to fail # hdparm -I /dev/rssda HDIO_DRIVE_CMD(identify) failed: Input/output error /dev/rssda: Patching linux-3.6-rc5 hdparm works as expected # hdparm -I /dev/rssda /dev/rssda: ATA device, with non-removable media Model Number: DELL_P320h-MTFDGAL350SAH Serial Number: 00000000121302025F01 Firmware Revision: B1442808 Reported-by: Tomas Henzl Signed-off-by: David Milburn Signed-off-by: Jens Axboe diff --git a/drivers/block/mtip32xx/mtip32xx.c b/drivers/block/mtip32xx/mtip32xx.c index e6519e2..f946d31 100644 --- a/drivers/block/mtip32xx/mtip32xx.c +++ b/drivers/block/mtip32xx/mtip32xx.c @@ -1904,7 +1904,7 @@ static int exec_drive_command(struct mtip_port *port, u8 *command, int rv = 0, xfer_sz = command[3]; if (xfer_sz) { - if (user_buffer) + if (!user_buffer) return -EFAULT; buf = dmam_alloc_coherent(&port->dd->pdev->dev, -- cgit v0.10.2 From bc01637a80f5b670bd70a0279d3f93fa8de1c96d Mon Sep 17 00:00:00 2001 From: Dmitry Kasatkin Date: Wed, 12 Sep 2012 13:26:55 +0300 Subject: digsig: add hash size comparision on signature verification When pkcs_1_v1_5_decode_emsa() returns without error and hash sizes do not match, hash comparision is not done and digsig_verify_rsa() returns no error. This is a bug and this patch fixes it. The bug was introduced in v3.3 by commit b35e286a640f ("lib/digsig: pkcs_1_v1_5_decode_emsa cleanup"). Cc: stable@vger.kernel.org Signed-off-by: Dmitry Kasatkin Signed-off-by: Linus Torvalds diff --git a/lib/digsig.c b/lib/digsig.c index 286d558..8c0e629 100644 --- a/lib/digsig.c +++ b/lib/digsig.c @@ -163,9 +163,11 @@ static int digsig_verify_rsa(struct key *key, memcpy(out1 + head, p, l); err = pkcs_1_v1_5_decode_emsa(out1, len, mblen, out2, &len); + if (err) + goto err; - if (!err && len == hlen) - err = memcmp(out2, h, hlen); + if (len != hlen || memcmp(out2, h, hlen)) + err = -EINVAL; err: mpi_free(in); -- cgit v0.10.2 From 26df641eac05abe1a3276eea441359b4d1120816 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 12 Sep 2012 10:05:04 +0000 Subject: gma500: Fix regression on Oaktrail devices The register map patches didn't set one value for the GMA600 which means the Fujitsu Q550 dies on boot with the GMA500 driver enabled. Add the map entry so we don't read from the device MMIO + 0 by mistake. Signed-off-by: Alan Cox Cc: Horses Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/gma500/oaktrail_device.c b/drivers/gpu/drm/gma500/oaktrail_device.c index 0f9b7db..cf49ba5 100644 --- a/drivers/gpu/drm/gma500/oaktrail_device.c +++ b/drivers/gpu/drm/gma500/oaktrail_device.c @@ -476,6 +476,7 @@ static const struct psb_offset oaktrail_regmap[2] = { .pos = DSPAPOS, .surf = DSPASURF, .addr = MRST_DSPABASE, + .base = MRST_DSPABASE, .status = PIPEASTAT, .linoff = DSPALINOFF, .tileoff = DSPATILEOFF, @@ -499,6 +500,7 @@ static const struct psb_offset oaktrail_regmap[2] = { .pos = DSPBPOS, .surf = DSPBSURF, .addr = DSPBBASE, + .base = DSPBBASE, .status = PIPEBSTAT, .linoff = DSPBLINOFF, .tileoff = DSPBTILEOFF, -- cgit v0.10.2 From 5e1782d224c79b26ab7d5c31e3f87657000714fb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Tue, 28 Aug 2012 01:53:54 +0000 Subject: vmwgfx: add dumb ioctl support Testing and works with the -modesetting driver, Reviewed-by: Jakob Bornecrantz Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c index 33bfc20..ba2c35d 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.c @@ -1155,6 +1155,11 @@ static struct drm_driver driver = { .open = vmw_driver_open, .preclose = vmw_preclose, .postclose = vmw_postclose, + + .dumb_create = vmw_dumb_create, + .dumb_map_offset = vmw_dumb_map_offset, + .dumb_destroy = vmw_dumb_destroy, + .fops = &vmwgfx_driver_fops, .name = VMWGFX_DRIVER_NAME, .desc = VMWGFX_DRIVER_DESC, diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h index d0f2c07..29c984f 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_drv.h @@ -645,6 +645,16 @@ int vmw_kms_readback(struct vmw_private *dev_priv, int vmw_kms_update_layout_ioctl(struct drm_device *dev, void *data, struct drm_file *file_priv); +int vmw_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args); + +int vmw_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, uint32_t handle, + uint64_t *offset); +int vmw_dumb_destroy(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle); /** * Overlay control - vmwgfx_overlay.c */ diff --git a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c index 22bf9a2..2c6ffe0 100644 --- a/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c +++ b/drivers/gpu/drm/vmwgfx/vmwgfx_resource.c @@ -1917,3 +1917,76 @@ err_ref: vmw_resource_unreference(&res); return ret; } + + +int vmw_dumb_create(struct drm_file *file_priv, + struct drm_device *dev, + struct drm_mode_create_dumb *args) +{ + struct vmw_private *dev_priv = vmw_priv(dev); + struct vmw_master *vmaster = vmw_master(file_priv->master); + struct vmw_user_dma_buffer *vmw_user_bo; + struct ttm_buffer_object *tmp; + int ret; + + args->pitch = args->width * ((args->bpp + 7) / 8); + args->size = args->pitch * args->height; + + vmw_user_bo = kzalloc(sizeof(*vmw_user_bo), GFP_KERNEL); + if (vmw_user_bo == NULL) + return -ENOMEM; + + ret = ttm_read_lock(&vmaster->lock, true); + if (ret != 0) { + kfree(vmw_user_bo); + return ret; + } + + ret = vmw_dmabuf_init(dev_priv, &vmw_user_bo->dma, args->size, + &vmw_vram_sys_placement, true, + &vmw_user_dmabuf_destroy); + if (ret != 0) + goto out_no_dmabuf; + + tmp = ttm_bo_reference(&vmw_user_bo->dma.base); + ret = ttm_base_object_init(vmw_fpriv(file_priv)->tfile, + &vmw_user_bo->base, + false, + ttm_buffer_type, + &vmw_user_dmabuf_release, NULL); + if (unlikely(ret != 0)) + goto out_no_base_object; + + args->handle = vmw_user_bo->base.hash.key; + +out_no_base_object: + ttm_bo_unref(&tmp); +out_no_dmabuf: + ttm_read_unlock(&vmaster->lock); + return ret; +} + +int vmw_dumb_map_offset(struct drm_file *file_priv, + struct drm_device *dev, uint32_t handle, + uint64_t *offset) +{ + struct ttm_object_file *tfile = vmw_fpriv(file_priv)->tfile; + struct vmw_dma_buffer *out_buf; + int ret; + + ret = vmw_user_dmabuf_lookup(tfile, handle, &out_buf); + if (ret != 0) + return -EINVAL; + + *offset = out_buf->base.addr_space_offset; + vmw_dmabuf_unreference(&out_buf); + return 0; +} + +int vmw_dumb_destroy(struct drm_file *file_priv, + struct drm_device *dev, + uint32_t handle) +{ + return ttm_ref_object_base_unref(vmw_fpriv(file_priv)->tfile, + handle, TTM_REF_USAGE); +} -- cgit v0.10.2 From 7ba073cdd8b770f990916a7b506d7b31fadb70a5 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 Aug 2012 12:16:16 +0530 Subject: drm/exynos: Remove redundant check in exynos_hdmi.c file devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index 409e2ec..bb504cb 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2312,11 +2312,6 @@ static int __devinit hdmi_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - DRM_ERROR("failed to find registers\n"); - ret = -ENOENT; - goto err_resource; - } hdata->regs = devm_request_and_ioremap(&pdev->dev, res); if (!hdata->regs) { -- cgit v0.10.2 From 16e197417de3414af7c183f7f4abfa2c7e37f297 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 Aug 2012 12:16:17 +0530 Subject: drm/exynos: Remove redundant check in exynos_drm_fimd.c file devm_request_and_ioremap function checks the validity of the pointer returned by platform_get_resource. Hence an additional check in the probe function is not necessary. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index a68d2b3..b19cd93 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -831,11 +831,6 @@ static int __devinit fimd_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "failed to find registers\n"); - ret = -ENOENT; - goto err_clk; - } ctx->regs = devm_request_and_ioremap(&pdev->dev, res); if (!ctx->regs) { -- cgit v0.10.2 From 59848db5055765a5d012ad7c428124eca1fcc625 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 Aug 2012 12:16:18 +0530 Subject: drm/exynos: Use devm_kzalloc in exynos_drm_vidi.c file devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_vidi.c b/drivers/gpu/drm/exynos/exynos_drm_vidi.c index bb1550c..537027a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_vidi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_vidi.c @@ -633,7 +633,7 @@ static int __devinit vidi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) return -ENOMEM; @@ -673,8 +673,6 @@ static int __devexit vidi_remove(struct platform_device *pdev) ctx->raw_edid = NULL; } - kfree(ctx); - return 0; } -- cgit v0.10.2 From ae18294018c7cf098777a33086073321477f723f Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 Aug 2012 12:16:19 +0530 Subject: drm/exynos: Use devm_kzalloc in exynos_drm_hdmi.c file devm_kzalloc is a device managed function and makes freeing and error handling simpler. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c index 8ffcdf8..3fdf0b6 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_drm_hdmi.c @@ -345,7 +345,7 @@ static int __devinit exynos_drm_hdmi_probe(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); - ctx = kzalloc(sizeof(*ctx), GFP_KERNEL); + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); if (!ctx) { DRM_LOG_KMS("failed to alloc common hdmi context.\n"); return -ENOMEM; @@ -371,7 +371,6 @@ static int __devexit exynos_drm_hdmi_remove(struct platform_device *pdev) DRM_DEBUG_KMS("%s\n", __FILE__); exynos_drm_subdrv_unregister(&ctx->subdrv); - kfree(ctx); return 0; } -- cgit v0.10.2 From b767593349c92049dcea4a8ce5c534c4a470099b Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 6 Aug 2012 12:16:20 +0530 Subject: drm/exynos: Use devm_* functions in exynos_drm_g2d.c file devm_* functions are device managed functions and make error handling and cleanup cleaner and simpler. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index d2d88f2..6adfa4e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -129,7 +129,6 @@ struct g2d_runqueue_node { struct g2d_data { struct device *dev; struct clk *gate_clk; - struct resource *regs_res; void __iomem *regs; int irq; struct workqueue_struct *g2d_workq; @@ -751,7 +750,7 @@ static int __devinit g2d_probe(struct platform_device *pdev) struct exynos_drm_subdrv *subdrv; int ret; - g2d = kzalloc(sizeof(*g2d), GFP_KERNEL); + g2d = devm_kzalloc(&pdev->dev, sizeof(*g2d), GFP_KERNEL); if (!g2d) { dev_err(dev, "failed to allocate driver data\n"); return -ENOMEM; @@ -759,10 +758,8 @@ static int __devinit g2d_probe(struct platform_device *pdev) g2d->runqueue_slab = kmem_cache_create("g2d_runqueue_slab", sizeof(struct g2d_runqueue_node), 0, 0, NULL); - if (!g2d->runqueue_slab) { - ret = -ENOMEM; - goto err_free_mem; - } + if (!g2d->runqueue_slab) + return -ENOMEM; g2d->dev = dev; @@ -794,38 +791,26 @@ static int __devinit g2d_probe(struct platform_device *pdev) pm_runtime_enable(dev); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "failed to get I/O memory\n"); - ret = -ENOENT; - goto err_put_clk; - } - g2d->regs_res = request_mem_region(res->start, resource_size(res), - dev_name(dev)); - if (!g2d->regs_res) { - dev_err(dev, "failed to request I/O memory\n"); - ret = -ENOENT; - goto err_put_clk; - } - - g2d->regs = ioremap(res->start, resource_size(res)); + g2d->regs = devm_request_and_ioremap(&pdev->dev, res); if (!g2d->regs) { dev_err(dev, "failed to remap I/O memory\n"); ret = -ENXIO; - goto err_release_res; + goto err_put_clk; } g2d->irq = platform_get_irq(pdev, 0); if (g2d->irq < 0) { dev_err(dev, "failed to get irq\n"); ret = g2d->irq; - goto err_unmap_base; + goto err_put_clk; } - ret = request_irq(g2d->irq, g2d_irq_handler, 0, "drm_g2d", g2d); + ret = devm_request_irq(&pdev->dev, g2d->irq, g2d_irq_handler, 0, + "drm_g2d", g2d); if (ret < 0) { dev_err(dev, "irq request failed\n"); - goto err_unmap_base; + goto err_put_clk; } platform_set_drvdata(pdev, g2d); @@ -838,7 +823,7 @@ static int __devinit g2d_probe(struct platform_device *pdev) ret = exynos_drm_subdrv_register(subdrv); if (ret < 0) { dev_err(dev, "failed to register drm g2d device\n"); - goto err_free_irq; + goto err_put_clk; } dev_info(dev, "The exynos g2d(ver %d.%d) successfully probed\n", @@ -846,13 +831,6 @@ static int __devinit g2d_probe(struct platform_device *pdev) return 0; -err_free_irq: - free_irq(g2d->irq, g2d); -err_unmap_base: - iounmap(g2d->regs); -err_release_res: - release_resource(g2d->regs_res); - kfree(g2d->regs_res); err_put_clk: pm_runtime_disable(dev); clk_put(g2d->gate_clk); @@ -862,8 +840,6 @@ err_destroy_workqueue: destroy_workqueue(g2d->g2d_workq); err_destroy_slab: kmem_cache_destroy(g2d->runqueue_slab); -err_free_mem: - kfree(g2d); return ret; } @@ -873,24 +849,18 @@ static int __devexit g2d_remove(struct platform_device *pdev) cancel_work_sync(&g2d->runqueue_work); exynos_drm_subdrv_unregister(&g2d->subdrv); - free_irq(g2d->irq, g2d); while (g2d->runqueue_node) { g2d_free_runqueue_node(g2d, g2d->runqueue_node); g2d->runqueue_node = g2d_get_runqueue_node(g2d); } - iounmap(g2d->regs); - release_resource(g2d->regs_res); - kfree(g2d->regs_res); - pm_runtime_disable(&pdev->dev); clk_put(g2d->gate_clk); g2d_fini_cmdlist(g2d); destroy_workqueue(g2d->g2d_workq); kmem_cache_destroy(g2d->runqueue_slab); - kfree(g2d); return 0; } -- cgit v0.10.2 From 4fbd9a4539e4eda1e9588509eb31e9dc38ffd653 Mon Sep 17 00:00:00 2001 From: Thomas Meyer Date: Tue, 7 Aug 2012 08:57:25 +0200 Subject: drm/exynos: Use ERR_CAST inlined function instead of ERR_PTR(PTR_ERR(.. [1] The semantic patch that makes this change is available in scripts/coccinelle/api/err_cast.cocci. More information about semantic patching is available at http://coccinelle.lip6.fr/ Signed-off-by: Thomas Meyer Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index f9efde4..da4e3ca 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -122,7 +122,7 @@ fail: __free_page(pages[i]); drm_free_large(pages); - return ERR_PTR(PTR_ERR(p)); + return ERR_CAST(p); } static void exynos_gem_put_pages(struct drm_gem_object *obj, -- cgit v0.10.2 From 7da5907c84f8b092dc42b47b5c19684c1b3b4c98 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 17 Aug 2012 15:24:03 +0900 Subject: drm/exynos: fixed page align bug. do not align in page unit at dumb creation. the align is done by exynos_drm_gem_create() to be called commonly. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_gem.c b/drivers/gpu/drm/exynos/exynos_drm_gem.c index da4e3ca..a38051c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_gem.c +++ b/drivers/gpu/drm/exynos/exynos_drm_gem.c @@ -662,7 +662,7 @@ int exynos_drm_gem_dumb_create(struct drm_file *file_priv, */ args->pitch = args->width * ((args->bpp + 7) / 8); - args->size = PAGE_ALIGN(args->pitch * args->height); + args->size = args->pitch * args->height; exynos_gem_obj = exynos_drm_gem_create(dev, args->flags, args->size); if (IS_ERR(exynos_gem_obj)) -- cgit v0.10.2 From 254d4d111ee159a39d4afb30d9515036d1e0b027 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 14 Aug 2012 12:07:20 +0530 Subject: drm/exynos: Add dependency for G2D in Kconfig Select Exynos DRM based G2D only if non-DRM based Exynos G2D driver is not selected. Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/Kconfig b/drivers/gpu/drm/exynos/Kconfig index 7f50967..59a26e5 100644 --- a/drivers/gpu/drm/exynos/Kconfig +++ b/drivers/gpu/drm/exynos/Kconfig @@ -36,6 +36,6 @@ config DRM_EXYNOS_VIDI config DRM_EXYNOS_G2D bool "Exynos DRM G2D" - depends on DRM_EXYNOS + depends on DRM_EXYNOS && !VIDEO_SAMSUNG_S5P_G2D help Choose this option if you want to use Exynos G2D for DRM. -- cgit v0.10.2 From 9e1355e7d9c0dac39b9bc4e146a49d379f43ba42 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 28 Aug 2012 14:11:41 +0530 Subject: drm/exynos: Make g2d_pm_ops static Fixes the following warning: drivers/gpu/drm/exynos/exynos_drm_g2d.c:897:1: warning: symbol 'g2d_pm_ops' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c index 6adfa4e..1065e90 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c +++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c @@ -894,7 +894,7 @@ static int g2d_resume(struct device *dev) } #endif -SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume); +static SIMPLE_DEV_PM_OPS(g2d_pm_ops, g2d_suspend, g2d_resume); struct platform_driver g2d_driver = { .probe = g2d_probe, -- cgit v0.10.2 From adc837ac3c6eb76d734e471512eaeba210fa5e98 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 31 Aug 2012 15:50:47 +0530 Subject: drm/exynos: Add missing braces around sizeof in exynos_hdmi.c Fixes the following checkpatch warnings: WARNING: sizeof *res should be sizeof(*res) WARNING: sizeof res->regul_bulk[0] should be sizeof(res->regul_bulk[0]) WARNING: sizeof *res should be sizeof(*res) Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index bb504cb..a6aea6f 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -2172,7 +2172,7 @@ static int __devinit hdmi_resources_init(struct hdmi_context *hdata) DRM_DEBUG_KMS("HDMI resource init\n"); - memset(res, 0, sizeof *res); + memset(res, 0, sizeof(*res)); /* get clocks, power */ res->hdmi = clk_get(dev, "hdmi"); @@ -2204,7 +2204,7 @@ static int __devinit hdmi_resources_init(struct hdmi_context *hdata) clk_set_parent(res->sclk_hdmi, res->sclk_pixel); res->regul_bulk = kzalloc(ARRAY_SIZE(supply) * - sizeof res->regul_bulk[0], GFP_KERNEL); + sizeof(res->regul_bulk[0]), GFP_KERNEL); if (!res->regul_bulk) { DRM_ERROR("failed to get memory for regulators\n"); goto fail; @@ -2243,7 +2243,7 @@ static int hdmi_resources_cleanup(struct hdmi_context *hdata) clk_put(res->sclk_hdmi); if (!IS_ERR_OR_NULL(res->hdmi)) clk_put(res->hdmi); - memset(res, 0, sizeof *res); + memset(res, 0, sizeof(*res)); return 0; } -- cgit v0.10.2 From e25e1b6654e3d80da7a40561ec6dba6c5e7e12d3 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 31 Aug 2012 15:50:48 +0530 Subject: drm/exynos: Add missing braces around sizeof in exynos_mixer.c Fixes the following checkpatch warnings: WARNING: sizeof filter_y_horiz_tap8 should be sizeof(filter_y_horiz_tap8) WARNING: sizeof filter_y_vert_tap4 should be sizeof(filter_y_vert_tap4) WARNING: sizeof filter_cr_horiz_tap4 should be sizeof(filter_cr_horiz_tap4) Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_mixer.c b/drivers/gpu/drm/exynos/exynos_mixer.c index 30fcc12..25b97d5 100644 --- a/drivers/gpu/drm/exynos/exynos_mixer.c +++ b/drivers/gpu/drm/exynos/exynos_mixer.c @@ -236,11 +236,11 @@ static inline void vp_filter_set(struct mixer_resources *res, static void vp_default_filter(struct mixer_resources *res) { vp_filter_set(res, VP_POLY8_Y0_LL, - filter_y_horiz_tap8, sizeof filter_y_horiz_tap8); + filter_y_horiz_tap8, sizeof(filter_y_horiz_tap8)); vp_filter_set(res, VP_POLY4_Y0_LL, - filter_y_vert_tap4, sizeof filter_y_vert_tap4); + filter_y_vert_tap4, sizeof(filter_y_vert_tap4)); vp_filter_set(res, VP_POLY4_C0_LL, - filter_cr_horiz_tap4, sizeof filter_cr_horiz_tap4); + filter_cr_horiz_tap4, sizeof(filter_cr_horiz_tap4)); } static void mixer_vsync_set_update(struct mixer_context *ctx, bool enable) -- cgit v0.10.2 From b716d46e003fc12f64bbdd71e5b9fd733e59b8d4 Mon Sep 17 00:00:00 2001 From: Tomasz Stanislawski Date: Wed, 5 Sep 2012 19:31:56 +0900 Subject: drm/exynos: add dummy support for dmabuf-mmap This patch adds a stub function for DMABUF mmap. This allows to export a DMABUF. Signed-off-by: Tomasz Stanislawski Signed-off-by: Kyungmin Park Signed-off-by: Inki Dae diff --git a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c index 613bf8a..ae13feb 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dmabuf.c @@ -163,6 +163,12 @@ static void exynos_gem_dmabuf_kunmap(struct dma_buf *dma_buf, /* TODO */ } +static int exynos_gem_dmabuf_mmap(struct dma_buf *dma_buf, + struct vm_area_struct *vma) +{ + return -ENOTTY; +} + static struct dma_buf_ops exynos_dmabuf_ops = { .map_dma_buf = exynos_gem_map_dma_buf, .unmap_dma_buf = exynos_gem_unmap_dma_buf, @@ -170,6 +176,7 @@ static struct dma_buf_ops exynos_dmabuf_ops = { .kmap_atomic = exynos_gem_dmabuf_kmap_atomic, .kunmap = exynos_gem_dmabuf_kunmap, .kunmap_atomic = exynos_gem_dmabuf_kunmap_atomic, + .mmap = exynos_gem_dmabuf_mmap, .release = exynos_dmabuf_release, }; -- cgit v0.10.2 From 525ee699f08c0d2516103e4ffd57c21041405d0c Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Thu, 6 Sep 2012 09:49:23 -0700 Subject: drm/exynos: fix double call of drm_prime_(init/destroy)_file_private The double invocations are incorrect but seem to be safe so I don't think this will fix any bugs. Before: [ 7.639366] drm_prime_init_file ee3675d0 [ 7.639377] drm_prime_init_file ee3675d0 [ 7.639507] drm_prime_destroy_file ee3675d0 [ 7.639518] drm_prime_destroy_file ee3675d0 [ 7.639802] drm_prime_init_file ee372390 [ 7.639810] drm_prime_init_file ee372390 [ 8.473316] drm_prime_init_file ee356390 [ 8.473331] drm_prime_init_file ee356390 After: [ 6.363842] drm_prime_init_file edc2e5d0 [ 6.363994] drm_prime_destroy_file edc2e5d0 [ 6.364260] drm_prime_init_file edc2e750 [ 8.004837] drm_prime_init_file ee36ded0 Signed-off-by: Mandeep Singh Baines Acked-by: Seung-Woo Kim Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_drv.c b/drivers/gpu/drm/exynos/exynos_drm_drv.c index 6345abe..d070719 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_drv.c +++ b/drivers/gpu/drm/exynos/exynos_drm_drv.c @@ -160,7 +160,6 @@ static int exynos_drm_open(struct drm_device *dev, struct drm_file *file) if (!file_priv) return -ENOMEM; - drm_prime_init_file_private(&file->prime); file->driver_priv = file_priv; return exynos_drm_subdrv_open(dev, file); @@ -184,7 +183,6 @@ static void exynos_drm_preclose(struct drm_device *dev, e->base.destroy(&e->base); } } - drm_prime_destroy_file_private(&file->prime); spin_unlock_irqrestore(&dev->event_lock, flags); exynos_drm_subdrv_close(dev, file); -- cgit v0.10.2 From ece82d624cd0ca783e3fa2377fbbce6dd01ec1b3 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 7 Sep 2012 16:18:15 +0900 Subject: drm/exynos: remove DRM_FORMAT_NV12M from plane module this patch removes DRM_FORMAT_NV12M from plane module because this format is same as DRM_FORMAT_NV12. DRM_FORMAT_NV12M will be identified by mode_cmd->handles and mode_cmd->offsets fields internally. Signed-off-by: Inki Dae Signed-off-by: Kyungmin.park diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index b89829e..e1f94b7 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -29,7 +29,6 @@ static const uint32_t formats[] = { DRM_FORMAT_XRGB8888, DRM_FORMAT_ARGB8888, DRM_FORMAT_NV12, - DRM_FORMAT_NV12M, DRM_FORMAT_NV12MT, }; -- cgit v0.10.2 From d9dd85dd4e18c255225bada181ffcee37f4ff9a6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ville=20Syrj=C3=A4l=C3=A4?= Date: Fri, 20 Apr 2012 18:26:10 +0300 Subject: drm: Drop the NV12M and YUV420M formats MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The NV12M/YUV420M formats are identical to the NV12/YUV420 formats. So just remove these duplicated format names. This might look like breaking the ABI, but the code has never actually accepted these formats, so nothing can be using them. Signed-off-by: Ville Syrjälä Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/include/drm/drm_fourcc.h b/include/drm/drm_fourcc.h index bdf0152..f462118 100644 --- a/include/drm/drm_fourcc.h +++ b/include/drm/drm_fourcc.h @@ -107,8 +107,7 @@ #define DRM_FORMAT_NV16 fourcc_code('N', 'V', '1', '6') /* 2x1 subsampled Cr:Cb plane */ #define DRM_FORMAT_NV61 fourcc_code('N', 'V', '6', '1') /* 2x1 subsampled Cb:Cr plane */ -/* 2 non contiguous plane YCbCr */ -#define DRM_FORMAT_NV12M fourcc_code('N', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane */ +/* special NV12 tiled format */ #define DRM_FORMAT_NV12MT fourcc_code('T', 'M', '1', '2') /* 2x2 subsampled Cr:Cb plane 64x32 macroblocks */ /* @@ -131,7 +130,4 @@ #define DRM_FORMAT_YUV444 fourcc_code('Y', 'U', '2', '4') /* non-subsampled Cb (1) and Cr (2) planes */ #define DRM_FORMAT_YVU444 fourcc_code('Y', 'V', '2', '4') /* non-subsampled Cr (1) and Cb (2) planes */ -/* 3 non contiguous plane YCbCr */ -#define DRM_FORMAT_YUV420M fourcc_code('Y', 'M', '1', '2') /* 2x2 subsampled Cb (1) and Cr (2) planes */ - #endif /* DRM_FOURCC_H */ -- cgit v0.10.2 From 1fefb8fdc6562057a0e4e4542f3d4323981c9686 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 10 Sep 2012 01:09:04 +0100 Subject: ahci: Add JMicron 362 device IDs The JMicron JMB362 controller supports AHCI only, but some revisions use the IDE class code. These need to be matched by device ID. These additions have apparently been included by QNAP in their NAS devices using these controllers. References: http://bugs.debian.org/634180 Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 50d5dea..c3f52eb 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -268,6 +268,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* JMicron 360/1/3/5/6, match class to avoid IDE function */ { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_SATA_AHCI, 0xffffff, board_ahci_ign_iferr }, + /* JMicron 362B and 362C have an AHCI function with IDE class code */ + { PCI_VDEVICE(JMICRON, 0x2362), board_ahci_ign_iferr }, + { PCI_VDEVICE(JMICRON, 0x236f), board_ahci_ign_iferr }, /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ -- cgit v0.10.2 From 17c60c6b763cb5b83b0185e7d38d01d18e55a05a Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Sep 2012 16:07:18 +0100 Subject: ahci: Add alternate identifier for the 88SE9172 This can also appear as 0x9192. Reported in bugzilla and confirmed with the board documentation for these boards. Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42970 Signed-off-by: Alan Cox Cc: The Stables Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index c3f52eb..51548dd 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -396,6 +396,8 @@ static const struct pci_device_id ahci_pci_tbl[] = { .driver_data = board_ahci_yes_fbs }, /* 88se9125 */ { PCI_DEVICE(0x1b4b, 0x917a), .driver_data = board_ahci_yes_fbs }, /* 88se9172 */ + { PCI_DEVICE(0x1b4b, 0x9192), + .driver_data = board_ahci_yes_fbs }, /* 88se9172 on some Gigabyte */ { PCI_DEVICE(0x1b4b, 0x91a3), .driver_data = board_ahci_yes_fbs }, -- cgit v0.10.2 From 7b4f6ecacb14f384adc1a5a67ad95eb082c02bd1 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 4 Sep 2012 16:25:25 +0100 Subject: ahci: Add identifiers for ASM106x devices They don't always appear as AHCI class devices but instead as IDE class. Based on an initial patch by Hiroaki Nito Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=42804 Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 51548dd..7862d17 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -405,7 +405,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(PROMISE, 0x3f20), board_ahci }, /* PDC42819 */ /* Asmedia */ - { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1061 */ + { PCI_VDEVICE(ASMEDIA, 0x0601), board_ahci }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0602), board_ahci }, /* ASM1060 */ + { PCI_VDEVICE(ASMEDIA, 0x0611), board_ahci }, /* ASM1061 */ + { PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */ /* Generic, PCI class code for AHCI */ { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, -- cgit v0.10.2 From da1dfb6af849cb05aa82b0c18866a7b2bafb6905 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 26 Jul 2012 11:30:54 +0100 Subject: GFS2: Make write size hinting code common This collects up the write size hinting code which is used by the block reservation subsystem into a single function. At the same time this also corrects the rounding for this calculation. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/file.c b/fs/gfs2/file.c index d1d791e..382000f 100644 --- a/fs/gfs2/file.c +++ b/fs/gfs2/file.c @@ -323,6 +323,29 @@ static long gfs2_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) } /** + * gfs2_size_hint - Give a hint to the size of a write request + * @file: The struct file + * @offset: The file offset of the write + * @size: The length of the write + * + * When we are about to do a write, this function records the total + * write size in order to provide a suitable hint to the lower layers + * about how many blocks will be required. + * + */ + +static void gfs2_size_hint(struct file *filep, loff_t offset, size_t size) +{ + struct inode *inode = filep->f_dentry->d_inode; + struct gfs2_sbd *sdp = GFS2_SB(inode); + struct gfs2_inode *ip = GFS2_I(inode); + size_t blks = (size + sdp->sd_sb.sb_bsize - 1) >> sdp->sd_sb.sb_bsize_shift; + int hint = min_t(size_t, INT_MAX, blks); + + atomic_set(&ip->i_res->rs_sizehint, hint); +} + +/** * gfs2_allocate_page_backing - Use bmap to allocate blocks * @page: The (locked) page to allocate backing for * @@ -382,8 +405,7 @@ static int gfs2_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) if (ret) return ret; - atomic_set(&ip->i_res->rs_sizehint, - PAGE_CACHE_SIZE >> sdp->sd_sb.sb_bsize_shift); + gfs2_size_hint(vma->vm_file, pos, PAGE_CACHE_SIZE); gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); ret = gfs2_glock_nq(&gh); @@ -663,7 +685,8 @@ static ssize_t gfs2_file_aio_write(struct kiocb *iocb, const struct iovec *iov, if (ret) return ret; - atomic_set(&ip->i_res->rs_sizehint, writesize >> sdp->sd_sb.sb_bsize_shift); + gfs2_size_hint(file, pos, writesize); + if (file->f_flags & O_APPEND) { struct gfs2_holder gh; @@ -789,7 +812,7 @@ static long gfs2_fallocate(struct file *file, int mode, loff_t offset, if (unlikely(error)) goto out_uninit; - atomic_set(&ip->i_res->rs_sizehint, len >> sdp->sd_sb.sb_bsize_shift); + gfs2_size_hint(file, offset, len); while (len > 0) { if (len < bytes) -- cgit v0.10.2 From 645b2ccc75d3d15928e3dbfc659659c2b8d4d9a6 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 26 Jul 2012 14:15:17 +0100 Subject: GFS2: Fix missing allocation data for set/remove xattr These entry points were missed in the original patch to allocate this data structure. Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c index 4ce22e5..753af3d 100644 --- a/fs/gfs2/inode.c +++ b/fs/gfs2/inode.c @@ -1722,7 +1722,9 @@ static int gfs2_setxattr(struct dentry *dentry, const char *name, gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); ret = gfs2_glock_nq(&gh); if (ret == 0) { - ret = generic_setxattr(dentry, name, data, size, flags); + ret = gfs2_rs_alloc(ip); + if (ret == 0) + ret = generic_setxattr(dentry, name, data, size, flags); gfs2_glock_dq(&gh); } gfs2_holder_uninit(&gh); @@ -1757,7 +1759,9 @@ static int gfs2_removexattr(struct dentry *dentry, const char *name) gfs2_holder_init(ip->i_gl, LM_ST_EXCLUSIVE, 0, &gh); ret = gfs2_glock_nq(&gh); if (ret == 0) { - ret = generic_removexattr(dentry, name); + ret = gfs2_rs_alloc(ip); + if (ret == 0) + ret = generic_removexattr(dentry, name); gfs2_glock_dq(&gh); } gfs2_holder_uninit(&gh); -- cgit v0.10.2 From 62e252eeefda62eb8cae9f4286270317ab8d5a42 Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Mon, 30 Jul 2012 11:06:08 +0100 Subject: GFS2: Take account of blockages when using reserved blocks The claim_reserved_blks() function was not taking account of the possibility of "blockages" while performing allocation. This can be caused by another node allocating something in the same extent which has been reserved locally. This patch tests for this condition and then skips the remainder of the reservation in this case. This is a relatively rare event, so that it should not affect the general performance improvement which the block reservations provide. The claim_reserved_blks() function also appears not to be able to deal with reservations which cross bitmap boundaries, but that can be dealt with in a future patch since we don't generate boundary crossing reservations currently. Signed-off-by: Steven Whitehouse Reported-by: David Teigland Cc: Bob Peterson diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 4d34887..c9ed814 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1961,7 +1961,7 @@ static void gfs2_rgrp_error(struct gfs2_rgrpd *rgd) * @dinode: 1 if this block is a dinode block, otherwise data block * @nblocks: desired extent length * - * Lay claim to previously allocated block reservation blocks. + * Lay claim to previously reserved blocks. * Returns: Starting block number of the blocks claimed. * Sets *nblocks to the actual extent length allocated. */ @@ -1970,19 +1970,17 @@ static u64 claim_reserved_blks(struct gfs2_inode *ip, bool dinode, { struct gfs2_blkreserv *rs = ip->i_res; struct gfs2_rgrpd *rgd = rs->rs_rgd; - struct gfs2_sbd *sdp = GFS2_SB(&ip->i_inode); struct gfs2_bitmap *bi; u64 start_block = gfs2_rs_startblk(rs); const unsigned int elen = *nblocks; - /*BUG_ON(!gfs2_glock_is_locked_by_me(ip->i_gl));*/ - gfs2_assert_withdraw(sdp, rgd); - /*BUG_ON(!gfs2_glock_is_locked_by_me(rgd->rd_gl));*/ bi = rs->rs_bi; gfs2_trans_add_bh(rgd->rd_gl, bi->bi_bh, 1); for (*nblocks = 0; *nblocks < elen && rs->rs_free; (*nblocks)++) { - /* Make sure the bitmap hasn't changed */ + if (gfs2_testbit(rgd, bi->bi_bh->b_data + bi->bi_offset, + bi->bi_len, rs->rs_biblk) != GFS2_BLKST_FREE) + break; gfs2_setbit(rgd, bi->bi_clone, bi, rs->rs_biblk, dinode ? GFS2_BLKST_DINODE : GFS2_BLKST_USED); rs->rs_biblk++; @@ -1991,20 +1989,12 @@ static u64 claim_reserved_blks(struct gfs2_inode *ip, bool dinode, BUG_ON(!rgd->rd_reserved); rgd->rd_reserved--; dinode = false; - trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM); } - if (!rs->rs_free) { - struct gfs2_rgrpd *rgd = ip->i_res->rs_rgd; - + trace_gfs2_rs(ip, rs, TRACE_RS_CLAIM); + if (!rs->rs_free || *nblocks != elen) gfs2_rs_deltree(rs); - /* -nblocks because we haven't returned to do the math yet. - I'm doing the math backwards to prevent negative numbers, - but think of it as: - if (unclaimed_blocks(rgd) - *nblocks >= RGRP_RSRV_MINBLKS */ - if (unclaimed_blocks(rgd) >= RGRP_RSRV_MINBLKS + *nblocks) - rg_mblk_search(rgd, ip); - } + return start_block; } @@ -2037,34 +2027,34 @@ int gfs2_alloc_blocks(struct gfs2_inode *ip, u64 *bn, unsigned int *nblocks, if (ip->i_res->rs_requested == 0) return -ECANCELED; - /* Check if we have a multi-block reservation, and if so, claim the - next free block from it. */ + /* If we have a reservation, claim blocks from it. */ if (gfs2_rs_active(ip->i_res)) { BUG_ON(!ip->i_res->rs_free); rgd = ip->i_res->rs_rgd; block = claim_reserved_blks(ip, dinode, nblocks); - } else { - rgd = ip->i_rgd; + if (*nblocks) + goto found_blocks; + } - if (!dinode && rgrp_contains_block(rgd, ip->i_goal)) - goal = ip->i_goal - rgd->rd_data0; - else - goal = rgd->rd_last_alloc; - - blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi); - - /* Since all blocks are reserved in advance, this shouldn't - happen */ - if (blk == BFITNOENT) { - printk(KERN_WARNING "BFITNOENT, nblocks=%u\n", - *nblocks); - printk(KERN_WARNING "FULL=%d\n", - test_bit(GBF_FULL, &rgd->rd_bits->bi_flags)); - goto rgrp_error; - } + rgd = ip->i_rgd; - block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks); + if (!dinode && rgrp_contains_block(rgd, ip->i_goal)) + goal = ip->i_goal - rgd->rd_data0; + else + goal = rgd->rd_last_alloc; + + blk = rgblk_search(rgd, goal, GFS2_BLKST_FREE, &bi); + + /* Since all blocks are reserved in advance, this shouldn't happen */ + if (blk == BFITNOENT) { + printk(KERN_WARNING "BFITNOENT, nblocks=%u\n", *nblocks); + printk(KERN_WARNING "FULL=%d\n", + test_bit(GBF_FULL, &rgd->rd_bits->bi_flags)); + goto rgrp_error; } + + block = gfs2_alloc_extent(rgd, bi, blk, dinode, nblocks); +found_blocks: ndata = *nblocks; if (dinode) ndata--; -- cgit v0.10.2 From 64f1e00d8edb54f5d25fb0114a46050fb8340df4 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 13 Sep 2012 15:28:56 +0200 Subject: ALSA: hda - Yet another position_fix quirk for ASUS machines ASUS X53S also suffers from the same issue as in commit c302d6133. Use POS_FIX_POSBUF for this hardware, too. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47461 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/hda_intel.c b/sound/pci/hda/hda_intel.c index 228cdf9..c4763c5 100644 --- a/sound/pci/hda/hda_intel.c +++ b/sound/pci/hda/hda_intel.c @@ -2701,6 +2701,7 @@ static struct snd_pci_quirk position_fix_list[] __devinitdata = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81b3, "ASUS", POS_FIX_LPIB), SND_PCI_QUIRK(0x1043, 0x81e7, "ASUS M2V", POS_FIX_LPIB), + SND_PCI_QUIRK(0x1043, 0x1ac3, "ASUS X53S", POS_FIX_POSBUF), SND_PCI_QUIRK(0x1043, 0x1b43, "ASUS K53E", POS_FIX_POSBUF), SND_PCI_QUIRK(0x104d, 0x9069, "Sony VPCS11V9E", POS_FIX_LPIB), SND_PCI_QUIRK(0x10de, 0xcb89, "Macbook Pro 7,1", POS_FIX_LPIB), -- cgit v0.10.2 From 35534b201c9f115c68962c095b5a9aad204d025f Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Wed, 29 Aug 2012 15:01:22 +0200 Subject: perf/x86: Export Sandy Bridge uncore clockticks event in sysfs This patch exports the clockticks event and its encoding to user level. The clockticks event was exported for Nehalem/Westmere but not for Sandy Bridge (client). Given that it uses a special encoding, it needs to be exported to user tools, so users can do: # perf stat -a -C 0 -e uncore_cbox_0/clockticks/ sleep 1 Signed-off-by: Stephane Eranian Acked-by: Yan, Zheng Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120829130122.GA32336@quad Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_intel_uncore.c b/arch/x86/kernel/cpu/perf_event_intel_uncore.c index 0a55710..38e4894 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_uncore.c +++ b/arch/x86/kernel/cpu/perf_event_intel_uncore.c @@ -661,6 +661,11 @@ static void snb_uncore_msr_init_box(struct intel_uncore_box *box) } } +static struct uncore_event_desc snb_uncore_events[] = { + INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"), + { /* end: all zeroes */ }, +}; + static struct attribute *snb_uncore_formats_attr[] = { &format_attr_event.attr, &format_attr_umask.attr, @@ -704,6 +709,7 @@ static struct intel_uncore_type snb_uncore_cbox = { .constraints = snb_uncore_cbox_constraints, .ops = &snb_uncore_msr_ops, .format_group = &snb_uncore_format_group, + .event_descs = snb_uncore_events, }; static struct intel_uncore_type *snb_msr_uncores[] = { -- cgit v0.10.2 From bad9ac2d7f878a31cf1ae8c1ee3768077d222bcb Mon Sep 17 00:00:00 2001 From: Robert Richter Date: Wed, 25 Jul 2012 19:12:45 +0200 Subject: perf/x86/ibs: Check syscall attribute flags Current implementation simply ignores attribute flags. Thus, there is no notification to userland of unsupported features. Check syscall's attribute flags to let userland know if a feature is supported by the kernel. This is also needed to distinguish between future kernels what might support a feature. Cc: v3.5.. Signed-off-by: Robert Richter Signed-off-by: Peter Zijlstra Link: http://lkml.kernel.org/r/20120910093018.GO8285@erda.amd.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event_amd_ibs.c b/arch/x86/kernel/cpu/perf_event_amd_ibs.c index 7bfb5be..eebd5ff 100644 --- a/arch/x86/kernel/cpu/perf_event_amd_ibs.c +++ b/arch/x86/kernel/cpu/perf_event_amd_ibs.c @@ -209,6 +209,15 @@ static int perf_ibs_precise_event(struct perf_event *event, u64 *config) return -EOPNOTSUPP; } +static const struct perf_event_attr ibs_notsupp = { + .exclude_user = 1, + .exclude_kernel = 1, + .exclude_hv = 1, + .exclude_idle = 1, + .exclude_host = 1, + .exclude_guest = 1, +}; + static int perf_ibs_init(struct perf_event *event) { struct hw_perf_event *hwc = &event->hw; @@ -229,6 +238,9 @@ static int perf_ibs_init(struct perf_event *event) if (event->pmu != &perf_ibs->pmu) return -ENOENT; + if (perf_flags(&event->attr) & perf_flags(&ibs_notsupp)) + return -EINVAL; + if (config & ~perf_ibs->config_mask) return -EINVAL; diff --git a/include/linux/perf_event.h b/include/linux/perf_event.h index 33ed9d6..bdb4161 100644 --- a/include/linux/perf_event.h +++ b/include/linux/perf_event.h @@ -274,6 +274,8 @@ struct perf_event_attr { __u64 branch_sample_type; /* enum branch_sample_type */ }; +#define perf_flags(attr) (*(&(attr)->read_format + 1)) + /* * Ioctls that can be done on a perf event fd: */ -- cgit v0.10.2 From 73e8f3d7e2cb23614d5115703d76d8e54764b641 Mon Sep 17 00:00:00 2001 From: T Makphaibulchoke Date: Tue, 28 Aug 2012 21:21:43 -0600 Subject: x86/mm/init.c: Fix devmem_is_allowed() off by one Fixing an off-by-one error in devmem_is_allowed(), which allows accesses to physical addresses 0x100000-0x100fff, an extra page past 1MB. Signed-off-by: T Makphaibulchoke Acked-by: H. Peter Anvin Cc: yinghai@kernel.org Cc: tiwai@suse.de Cc: dhowells@redhat.com Link: http://lkml.kernel.org/r/1346210503-14276-1-git-send-email-tmac@hp.com Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c index e0e6990..ab1f6a9 100644 --- a/arch/x86/mm/init.c +++ b/arch/x86/mm/init.c @@ -319,7 +319,7 @@ unsigned long __init_refok init_memory_mapping(unsigned long start, */ int devmem_is_allowed(unsigned long pagenr) { - if (pagenr <= 256) + if (pagenr < 256) return 1; if (iomem_is_exclusive(pagenr << PAGE_SHIFT)) return 0; -- cgit v0.10.2 From ec145babe754f9ea1079034a108104b6001e001c Mon Sep 17 00:00:00 2001 From: John Stultz Date: Tue, 11 Sep 2012 19:26:03 -0400 Subject: time: Fix timeekeping_get_ns overflow on 32bit systems Daniel Lezcano reported seeing multi-second stalls from keyboard input on his T61 laptop when NOHZ and CPU_IDLE were enabled on a 32bit kernel. He bisected the problem down to commit 1e75fa8be9fb6 ("time: Condense timekeeper.xtime into xtime_sec"). After reproducing this issue, I narrowed the problem down to the fact that timekeeping_get_ns() returns a 64bit nsec value that hasn't been accumulated. In some cases this value was being then stored in timespec.tv_nsec (which is a long). On 32bit systems, with idle times larger then 4 seconds (or less, depending on the value of xtime_nsec), the returned nsec value would overflow 32bits. This limited kept time from increasing, causing timers to not expire. The fix is to make sure we don't directly store the result of timekeeping_get_ns() into a tv_nsec field, instead using a 64bit nsec value which can then be added into the timespec via timespec_add_ns(). Reported-and-bisected-by: Daniel Lezcano Tested-by: Daniel Lezcano Signed-off-by: John Stultz Acked-by: Prarit Bhargava Cc: Richard Cochran Link: http://lkml.kernel.org/r/1347405963-35715-1-git-send-email-john.stultz@linaro.org Signed-off-by: Ingo Molnar diff --git a/kernel/time/timekeeping.c b/kernel/time/timekeeping.c index 34e5eac..d3b91e7 100644 --- a/kernel/time/timekeeping.c +++ b/kernel/time/timekeeping.c @@ -303,10 +303,11 @@ void getnstimeofday(struct timespec *ts) seq = read_seqbegin(&tk->lock); ts->tv_sec = tk->xtime_sec; - ts->tv_nsec = timekeeping_get_ns(tk); + nsecs = timekeeping_get_ns(tk); } while (read_seqretry(&tk->lock, seq)); + ts->tv_nsec = 0; timespec_add_ns(ts, nsecs); } EXPORT_SYMBOL(getnstimeofday); @@ -345,6 +346,7 @@ void ktime_get_ts(struct timespec *ts) { struct timekeeper *tk = &timekeeper; struct timespec tomono; + s64 nsec; unsigned int seq; WARN_ON(timekeeping_suspended); @@ -352,13 +354,14 @@ void ktime_get_ts(struct timespec *ts) do { seq = read_seqbegin(&tk->lock); ts->tv_sec = tk->xtime_sec; - ts->tv_nsec = timekeeping_get_ns(tk); + nsec = timekeeping_get_ns(tk); tomono = tk->wall_to_monotonic; } while (read_seqretry(&tk->lock, seq)); - set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec, - ts->tv_nsec + tomono.tv_nsec); + ts->tv_sec += tomono.tv_sec; + ts->tv_nsec = 0; + timespec_add_ns(ts, nsec + tomono.tv_nsec); } EXPORT_SYMBOL_GPL(ktime_get_ts); @@ -1244,6 +1247,7 @@ void get_monotonic_boottime(struct timespec *ts) { struct timekeeper *tk = &timekeeper; struct timespec tomono, sleep; + s64 nsec; unsigned int seq; WARN_ON(timekeeping_suspended); @@ -1251,14 +1255,15 @@ void get_monotonic_boottime(struct timespec *ts) do { seq = read_seqbegin(&tk->lock); ts->tv_sec = tk->xtime_sec; - ts->tv_nsec = timekeeping_get_ns(tk); + nsec = timekeeping_get_ns(tk); tomono = tk->wall_to_monotonic; sleep = tk->total_sleep_time; } while (read_seqretry(&tk->lock, seq)); - set_normalized_timespec(ts, ts->tv_sec + tomono.tv_sec + sleep.tv_sec, - ts->tv_nsec + tomono.tv_nsec + sleep.tv_nsec); + ts->tv_sec += tomono.tv_sec + sleep.tv_sec; + ts->tv_nsec = 0; + timespec_add_ns(ts, nsec + tomono.tv_nsec + sleep.tv_nsec); } EXPORT_SYMBOL_GPL(get_monotonic_boottime); -- cgit v0.10.2 From 4b921eda53366b319602351ff4d7256fafa4bd1b Mon Sep 17 00:00:00 2001 From: Karsten Keil Date: Thu, 13 Sep 2012 04:36:20 +0000 Subject: mISDN: Fix wrong usage of flush_work_sync while holding locks It is a bad idea to hold a spinlock and call flush_work_sync. Move the workqueue cleanup outside the spinlock and use cancel_work_sync, on closing the channel this seems to be the more correct function. Remove the never used and constant return value of mISDN_freebchannel. Signed-off-by: Karsten Keil Cc: Signed-off-by: David S. Miller diff --git a/drivers/isdn/hardware/mISDN/avmfritz.c b/drivers/isdn/hardware/mISDN/avmfritz.c index fa6ca47..dceaec8 100644 --- a/drivers/isdn/hardware/mISDN/avmfritz.c +++ b/drivers/isdn/hardware/mISDN/avmfritz.c @@ -857,8 +857,9 @@ avm_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(&fc->lock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); modehdlc(bch, ISDN_P_NONE); spin_unlock_irqrestore(&fc->lock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/mISDNipac.c b/drivers/isdn/hardware/mISDN/mISDNipac.c index 752e082..ccd7d85 100644 --- a/drivers/isdn/hardware/mISDN/mISDNipac.c +++ b/drivers/isdn/hardware/mISDN/mISDNipac.c @@ -1406,8 +1406,9 @@ hscx_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(hx->ip->hwlock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); hscx_mode(hx, ISDN_P_NONE); spin_unlock_irqrestore(hx->ip->hwlock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/mISDNisar.c b/drivers/isdn/hardware/mISDN/mISDNisar.c index be5973d..182ecf0 100644 --- a/drivers/isdn/hardware/mISDN/mISDNisar.c +++ b/drivers/isdn/hardware/mISDN/mISDNisar.c @@ -1588,8 +1588,9 @@ isar_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(ich->is->hwlock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); modeisar(ich, ISDN_P_NONE); spin_unlock_irqrestore(ich->is->hwlock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/netjet.c b/drivers/isdn/hardware/mISDN/netjet.c index c3e3e76..9bcade5 100644 --- a/drivers/isdn/hardware/mISDN/netjet.c +++ b/drivers/isdn/hardware/mISDN/netjet.c @@ -812,8 +812,9 @@ nj_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(&card->lock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); mode_tiger(bc, ISDN_P_NONE); spin_unlock_irqrestore(&card->lock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/hardware/mISDN/w6692.c b/drivers/isdn/hardware/mISDN/w6692.c index 26a86b8..335fe64 100644 --- a/drivers/isdn/hardware/mISDN/w6692.c +++ b/drivers/isdn/hardware/mISDN/w6692.c @@ -1054,8 +1054,9 @@ w6692_bctrl(struct mISDNchannel *ch, u32 cmd, void *arg) switch (cmd) { case CLOSE_CHANNEL: test_and_clear_bit(FLG_OPEN, &bch->Flags); + cancel_work_sync(&bch->workq); spin_lock_irqsave(&card->lock, flags); - mISDN_freebchannel(bch); + mISDN_clear_bchannel(bch); w6692_mode(bc, ISDN_P_NONE); spin_unlock_irqrestore(&card->lock, flags); ch->protocol = ISDN_P_NONE; diff --git a/drivers/isdn/mISDN/hwchannel.c b/drivers/isdn/mISDN/hwchannel.c index ef34fd4..2602be2 100644 --- a/drivers/isdn/mISDN/hwchannel.c +++ b/drivers/isdn/mISDN/hwchannel.c @@ -148,17 +148,16 @@ mISDN_clear_bchannel(struct bchannel *ch) ch->next_minlen = ch->init_minlen; ch->maxlen = ch->init_maxlen; ch->next_maxlen = ch->init_maxlen; + skb_queue_purge(&ch->rqueue); + ch->rcount = 0; } EXPORT_SYMBOL(mISDN_clear_bchannel); -int +void mISDN_freebchannel(struct bchannel *ch) { + cancel_work_sync(&ch->workq); mISDN_clear_bchannel(ch); - skb_queue_purge(&ch->rqueue); - ch->rcount = 0; - flush_work_sync(&ch->workq); - return 0; } EXPORT_SYMBOL(mISDN_freebchannel); diff --git a/include/linux/mISDNhw.h b/include/linux/mISDNhw.h index d0752ec..9d96d5d 100644 --- a/include/linux/mISDNhw.h +++ b/include/linux/mISDNhw.h @@ -183,7 +183,7 @@ extern int mISDN_initbchannel(struct bchannel *, unsigned short, unsigned short); extern int mISDN_freedchannel(struct dchannel *); extern void mISDN_clear_bchannel(struct bchannel *); -extern int mISDN_freebchannel(struct bchannel *); +extern void mISDN_freebchannel(struct bchannel *); extern int mISDN_ctrl_bchannel(struct bchannel *, struct mISDN_ctrl_req *); extern void queue_ch_frame(struct mISDNchannel *, u_int, int, struct sk_buff *); -- cgit v0.10.2 From e29fe837bfa3ca0a9f4ef1d4a90e6e0a74b6b8a0 Mon Sep 17 00:00:00 2001 From: David Ward Date: Thu, 13 Sep 2012 05:22:32 +0000 Subject: net_sched: gred: correct comment about qavg calculation in RIO mode Signed-off-by: David Ward Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index e901583..fca73cd 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -176,7 +176,7 @@ static int gred_enqueue(struct sk_buff *skb, struct Qdisc *sch) skb->tc_index = (skb->tc_index & ~GRED_VQ_MASK) | dp; } - /* sum up all the qaves of prios <= to ours to get the new qave */ + /* sum up all the qaves of prios < ours to get the new qave */ if (!gred_wred_mode(t) && gred_rio_mode(t)) { int i; -- cgit v0.10.2 From c22e464022f935b0cbd8724b1d99d800d49518a9 Mon Sep 17 00:00:00 2001 From: David Ward Date: Thu, 13 Sep 2012 05:22:33 +0000 Subject: net_sched: gred: eliminate redundant DP prio comparisons Each pair of DPs only needs to be compared once when searching for a non-unique prio value. Signed-off-by: David Ward Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index fca73cd..e19d4eb 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -102,9 +102,8 @@ static inline int gred_wred_mode_check(struct Qdisc *sch) if (q == NULL) continue; - for (n = 0; n < table->DPs; n++) - if (table->tab[n] && table->tab[n] != q && - table->tab[n]->prio == q->prio) + for (n = i + 1; n < table->DPs; n++) + if (table->tab[n] && table->tab[n]->prio == q->prio) return 1; } -- cgit v0.10.2 From 1fe37b106b039d9358fd1211c39b1fa199e547a8 Mon Sep 17 00:00:00 2001 From: David Ward Date: Thu, 13 Sep 2012 05:22:34 +0000 Subject: net_sched: gred: fix qave reporting via netlink q->vars.qavg is a Wlog scaled value, but q->backlog is not. In order to pass q->vars.qavg as the backlog value, we need to un-scale it. Additionally, the qave value returned via netlink should not be Wlog scaled, so we need to un-scale the result of red_calc_qavg(). This caused artificially high values for "Average Queue" to be shown by 'tc -s -d qdisc', but did not affect the actual operation of GRED. Signed-off-by: David Ward Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index e19d4eb..b2570b5 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -534,6 +534,7 @@ static int gred_dump(struct Qdisc *sch, struct sk_buff *skb) for (i = 0; i < MAX_DPs; i++) { struct gred_sched_data *q = table->tab[i]; struct tc_gred_qopt opt; + unsigned long qavg; memset(&opt, 0, sizeof(opt)); @@ -565,7 +566,9 @@ static int gred_dump(struct Qdisc *sch, struct sk_buff *skb) if (gred_wred_mode(table)) gred_load_wred_set(table, q); - opt.qave = red_calc_qavg(&q->parms, &q->vars, q->vars.qavg); + qavg = red_calc_qavg(&q->parms, &q->vars, + q->vars.qavg >> q->parms.Wlog); + opt.qave = qavg >> q->parms.Wlog; append_opt: if (nla_append(skb, sizeof(opt), &opt) < 0) -- cgit v0.10.2 From ba1bf474eae07a128fae6252bf7d68eaef0eacf8 Mon Sep 17 00:00:00 2001 From: David Ward Date: Thu, 13 Sep 2012 05:22:35 +0000 Subject: net_sched: gred: actually perform idling in WRED mode gred_dequeue() and gred_drop() do not seem to get called when the queue is empty, meaning that we never start idling while in WRED mode. And since qidlestart is not stored by gred_store_wred_set(), we would never stop idling while in WRED mode if we ever started. This messes up the average queue size calculation that influences packet marking/dropping behavior. Now, we start WRED mode idling as we are removing the last packet from the queue. Also we now actually stop WRED mode idling when we are enqueuing a packet. Cc: Bruce Osler Signed-off-by: David Ward Acked-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index b2570b5..d42234c 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -136,6 +136,7 @@ static inline void gred_store_wred_set(struct gred_sched *table, struct gred_sched_data *q) { table->wred_set.qavg = q->vars.qavg; + table->wred_set.qidlestart = q->vars.qidlestart; } static inline int gred_use_ecn(struct gred_sched *t) @@ -259,16 +260,18 @@ static struct sk_buff *gred_dequeue(struct Qdisc *sch) } else { q->backlog -= qdisc_pkt_len(skb); - if (!q->backlog && !gred_wred_mode(t)) - red_start_of_idle_period(&q->vars); + if (gred_wred_mode(t)) { + if (!sch->qstats.backlog) + red_start_of_idle_period(&t->wred_set); + } else { + if (!q->backlog) + red_start_of_idle_period(&q->vars); + } } return skb; } - if (gred_wred_mode(t) && !red_is_idling(&t->wred_set)) - red_start_of_idle_period(&t->wred_set); - return NULL; } @@ -290,19 +293,20 @@ static unsigned int gred_drop(struct Qdisc *sch) q->backlog -= len; q->stats.other++; - if (!q->backlog && !gred_wred_mode(t)) - red_start_of_idle_period(&q->vars); + if (gred_wred_mode(t)) { + if (!sch->qstats.backlog) + red_start_of_idle_period(&t->wred_set); + } else { + if (!q->backlog) + red_start_of_idle_period(&q->vars); + } } qdisc_drop(skb, sch); return len; } - if (gred_wred_mode(t) && !red_is_idling(&t->wred_set)) - red_start_of_idle_period(&t->wred_set); - return 0; - } static void gred_reset(struct Qdisc *sch) -- cgit v0.10.2 From 8624dd2a3e33b647cd672211b54ba276ddee2a2c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 12 Sep 2012 20:44:35 +0000 Subject: net: qmi_wwan: call subdriver with control intf only MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes a hang on suspend due to calling wdm_suspend on the unregistered data interface. The hang should have been a NULL pointer reference had it not been for a logic error in the cdc_wdm code. commit 230718bd net: qmi_wwan: bind to both control and data interface changed qmi_wwan to use cdc_wdm as a subdriver for devices with a two-interface QMI/wwan function. The commit failed to update qmi_wwan_suspend and qmi_wwan_resume, which were written to handle either a single combined interface function, or no subdriver at all. The result was that we called into the subdriver both when the control interface was suspended and when the data interface was suspended. Calling the subdriver suspend function with an unregistered interface is not supported and will make the subdriver bug out. Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 17b8f3e..b1ba68f 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -297,7 +297,7 @@ static int qmi_wwan_suspend(struct usb_interface *intf, pm_message_t message) if (ret < 0) goto err; - if (info->subdriver && info->subdriver->suspend) + if (intf == info->control && info->subdriver && info->subdriver->suspend) ret = info->subdriver->suspend(intf, message); if (ret < 0) usbnet_resume(intf); @@ -310,13 +310,14 @@ static int qmi_wwan_resume(struct usb_interface *intf) struct usbnet *dev = usb_get_intfdata(intf); struct qmi_wwan_state *info = (void *)&dev->data; int ret = 0; + bool callsub = (intf == info->control && info->subdriver && info->subdriver->resume); - if (info->subdriver && info->subdriver->resume) + if (callsub) ret = info->subdriver->resume(intf); if (ret < 0) goto err; ret = usbnet_resume(intf); - if (ret < 0 && info->subdriver && info->subdriver->resume && info->subdriver->suspend) + if (ret < 0 && callsub && info->subdriver->suspend) info->subdriver->suspend(intf, PMSG_SUSPEND); err: return ret; -- cgit v0.10.2 From 985f61f7ee647ad570c05eab0b74915da2ac8e19 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Fri, 31 Aug 2012 11:56:50 -0400 Subject: drm/radeon: rework pll selection (v3) For DP we can use the same PPLL for all active DP encoders. Take advantage of that to prevent cases where we may end up sharing a PPLL between DP and non-DP which won't work. Also clean up the code a bit. v2: - fix missing pll_id assignment in crtc init v3: - fix DP PPLL check - document functions - break in main encoder search loop after matching. no need to keep checking additional encoders. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=54471 Signed-off-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 2817101..e721e30 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1479,14 +1479,98 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc) } } +/** + * radeon_get_pll_use_mask - look up a mask of which pplls are in use + * + * @crtc: drm crtc + * + * Returns the mask of which PPLLs (Pixel PLLs) are in use. + */ +static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_crtc *test_crtc; + struct radeon_crtc *radeon_test_crtc; + u32 pll_in_use = 0; + + list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { + if (crtc == test_crtc) + continue; + + radeon_test_crtc = to_radeon_crtc(test_crtc); + if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID) + pll_in_use |= (1 << radeon_test_crtc->pll_id); + } + return pll_in_use; +} + +/** + * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP + * + * @crtc: drm crtc + * + * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is + * also in DP mode. For DP, a single PPLL can be used for all DP + * crtcs/encoders. + */ +static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc) +{ + struct drm_device *dev = crtc->dev; + struct drm_encoder *test_encoder; + struct radeon_crtc *radeon_test_crtc; + + list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { + if (test_encoder->crtc && (test_encoder->crtc != crtc)) { + if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { + /* for DP use the same PLL for all */ + radeon_test_crtc = to_radeon_crtc(test_encoder->crtc); + if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID) + return radeon_test_crtc->pll_id; + } + } + } + return ATOM_PPLL_INVALID; +} + +/** + * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc. + * + * @crtc: drm crtc + * + * Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors + * a single PPLL can be used for all DP crtcs/encoders. For non-DP + * monitors a dedicated PPLL must be used. If a particular board has + * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming + * as there is no need to program the PLL itself. If we are not able to + * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to + * avoid messing up an existing monitor. + * + * Asic specific PLL information + * + * DCE 6.1 + * - PPLL2 is only available to UNIPHYA (both DP and non-DP) + * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP) + * + * DCE 6.0 + * - PPLL0 is available to all UNIPHY (DP only) + * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC + * + * DCE 5.0 + * - DCPLL is available to all UNIPHY (DP only) + * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC + * + * DCE 3.0/4.0/4.1 + * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC + * + */ static int radeon_atom_pick_pll(struct drm_crtc *crtc) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; struct drm_encoder *test_encoder; - struct drm_crtc *test_crtc; - uint32_t pll_in_use = 0; + u32 pll_in_use; + int pll; if (ASIC_IS_DCE61(rdev)) { list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { @@ -1498,32 +1582,40 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) if ((test_radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY) && - (dig->linkb == false)) /* UNIPHY A uses PPLL2 */ + (dig->linkb == false)) + /* UNIPHY A uses PPLL2 */ return ATOM_PPLL2; + else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { + /* UNIPHY B/C/D/E/F */ + if (rdev->clock.dp_extclk) + /* skip PPLL programming if using ext clock */ + return ATOM_PPLL_INVALID; + else { + /* use the same PPLL for all DP monitors */ + pll = radeon_get_shared_dp_ppll(crtc); + if (pll != ATOM_PPLL_INVALID) + return pll; + } + } + break; } } /* UNIPHY B/C/D/E/F */ - list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { - struct radeon_crtc *radeon_test_crtc; - - if (crtc == test_crtc) - continue; - - radeon_test_crtc = to_radeon_crtc(test_crtc); - if ((radeon_test_crtc->pll_id == ATOM_PPLL0) || - (radeon_test_crtc->pll_id == ATOM_PPLL1)) - pll_in_use |= (1 << radeon_test_crtc->pll_id); - } - if (!(pll_in_use & 4)) + pll_in_use = radeon_get_pll_use_mask(crtc); + if (!(pll_in_use & (1 << ATOM_PPLL0))) return ATOM_PPLL0; - return ATOM_PPLL1; + if (!(pll_in_use & (1 << ATOM_PPLL1))) + return ATOM_PPLL1; + DRM_ERROR("unable to allocate a PPLL\n"); + return ATOM_PPLL_INVALID; } else if (ASIC_IS_DCE4(rdev)) { list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { if (test_encoder->crtc && (test_encoder->crtc == crtc)) { /* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock, * depending on the asic: * DCE4: PPLL or ext clock - * DCE5: DCPLL or ext clock + * DCE5: PPLL, DCPLL, or ext clock + * DCE6: PPLL, PPLL0, or ext clock * * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip * PPLL/DCPLL programming and only program the DP DTO for the @@ -1531,31 +1623,34 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) */ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { if (rdev->clock.dp_extclk) + /* skip PPLL programming if using ext clock */ return ATOM_PPLL_INVALID; else if (ASIC_IS_DCE6(rdev)) + /* use PPLL0 for all DP */ return ATOM_PPLL0; else if (ASIC_IS_DCE5(rdev)) + /* use DCPLL for all DP */ return ATOM_DCPLL; + else { + /* use the same PPLL for all DP monitors */ + pll = radeon_get_shared_dp_ppll(crtc); + if (pll != ATOM_PPLL_INVALID) + return pll; + } } + break; } } - - /* otherwise, pick one of the plls */ - list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { - struct radeon_crtc *radeon_test_crtc; - - if (crtc == test_crtc) - continue; - - radeon_test_crtc = to_radeon_crtc(test_crtc); - if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) && - (radeon_test_crtc->pll_id <= ATOM_PPLL2)) - pll_in_use |= (1 << radeon_test_crtc->pll_id); - } - if (!(pll_in_use & 1)) + /* all other cases */ + pll_in_use = radeon_get_pll_use_mask(crtc); + if (!(pll_in_use & (1 << ATOM_PPLL2))) + return ATOM_PPLL2; + if (!(pll_in_use & (1 << ATOM_PPLL1))) return ATOM_PPLL1; - return ATOM_PPLL2; + DRM_ERROR("unable to allocate a PPLL\n"); + return ATOM_PPLL_INVALID; } else + /* use PPLL1 or PPLL2 */ return radeon_crtc->crtc_id; } @@ -1697,7 +1792,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) break; } done: - radeon_crtc->pll_id = -1; + radeon_crtc->pll_id = ATOM_PPLL_INVALID; } static const struct drm_crtc_helper_funcs atombios_helper_funcs = { @@ -1746,6 +1841,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev, else radeon_crtc->crtc_offset = 0; } - radeon_crtc->pll_id = -1; + radeon_crtc->pll_id = ATOM_PPLL_INVALID; drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs); } -- cgit v0.10.2 From f492c171a38d77fc13a8998a0721f2da50835224 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Christian=20K=C3=B6nig?= Date: Thu, 13 Sep 2012 10:33:47 +0200 Subject: drm/radeon: make 64bit fences more robust v3 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only increase the higher 32bits if we really detect a wrap around. v2: instead of increasing the higher 32bits just use the higher 32bits from the last emitted fence. v3: also use last emitted fence value as upper limit. The intention of this patch is to make fences as robust as they where before introducing 64bit fences. This is necessary because on older systems it looks like the fence value gets corrupted on initialization. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=51344 Should also fix: https://bugs.freedesktop.org/show_bug.cgi?id=54129 https://bugs.freedesktop.org/show_bug.cgi?id=54662 https://bugzilla.redhat.com/show_bug.cgi?id=846505 https://bugzilla.redhat.com/show_bug.cgi?id=845639 3.5 needs a separate patch due to changes in the fence code. Will send that out separately. Signed-off-by: Christian König Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c index 7b737b9..2a59375 100644 --- a/drivers/gpu/drm/radeon/radeon_fence.c +++ b/drivers/gpu/drm/radeon/radeon_fence.c @@ -131,7 +131,7 @@ int radeon_fence_emit(struct radeon_device *rdev, */ void radeon_fence_process(struct radeon_device *rdev, int ring) { - uint64_t seq, last_seq; + uint64_t seq, last_seq, last_emitted; unsigned count_loop = 0; bool wake = false; @@ -158,13 +158,15 @@ void radeon_fence_process(struct radeon_device *rdev, int ring) */ last_seq = atomic64_read(&rdev->fence_drv[ring].last_seq); do { + last_emitted = rdev->fence_drv[ring].sync_seq[ring]; seq = radeon_fence_read(rdev, ring); seq |= last_seq & 0xffffffff00000000LL; if (seq < last_seq) { - seq += 0x100000000LL; + seq &= 0xffffffff; + seq |= last_emitted & 0xffffffff00000000LL; } - if (seq == last_seq) { + if (seq <= last_seq || seq > last_emitted) { break; } /* If we loop over we don't want to return without -- cgit v0.10.2 From bef05406ac0ea6f468e1e25e9934f3011ea9259b Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 11 Sep 2012 04:34:08 +0000 Subject: bnx2x: Avoid sending multiple statistics queries During traffic when DCB is enabled, it is possible for multiple instances of statistics queries to be sent to the chip - this may cause the FW to assert. This patch prevents the sending of an additional instance of statistics query while the previous query hasn't completed. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index 332db64..d848dc9 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -1151,9 +1151,11 @@ static void bnx2x_stats_update(struct bnx2x *bp) if (bp->port.pmf) bnx2x_hw_stats_update(bp); - if (bnx2x_storm_stats_update(bp) && (bp->stats_pending++ == 3)) { - BNX2X_ERR("storm stats were not updated for 3 times\n"); - bnx2x_panic(); + if (bnx2x_storm_stats_update(bp)) { + if (bp->stats_pending++ == 3) { + BNX2X_ERR("storm stats were not updated for 3 times\n"); + bnx2x_panic(); + } return; } -- cgit v0.10.2 From 217aeb896a4a9f00006ce4b193c216f739234296 Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Tue, 11 Sep 2012 04:34:09 +0000 Subject: bnx2x: fix stats copying logic FW needs the driver statistics for management. Current logic is broken in that the function that gathers the port statistics does not copy its own statistics to a place where the FW can use it. This patch causes every function that can pass statistics to the FW to do so. Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c index d848dc9..a1d0446 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c @@ -101,6 +101,11 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp) if (CHIP_REV_IS_SLOW(bp)) return; + /* Update MCP's statistics if possible */ + if (bp->func_stx) + memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats, + sizeof(bp->func_stats)); + /* loader */ if (bp->executer_idx) { int loader_idx = PMF_DMAE_C(bp); @@ -128,8 +133,6 @@ static void bnx2x_hw_stats_post(struct bnx2x *bp) } else if (bp->func_stx) { *stats_comp = 0; - memcpy(bnx2x_sp(bp, func_stats), &bp->func_stats, - sizeof(bp->func_stats)); bnx2x_post_dmae(bp, dmae, INIT_DMAE_C(bp)); } } -- cgit v0.10.2 From 375944cb7c96bf66914a73b1858e5865c439b335 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 11 Sep 2012 04:34:10 +0000 Subject: bnx2x: prevent timeouts when using PFC Prevent updating the xmac PFC configuration when using a link speed slower than 10G -the umac block is responsible for 1G or slower connections, therefore it is possible the xmac block is reset when connection is slower. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index f4beb46..40a7b8d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -2667,9 +2667,11 @@ int bnx2x_update_pfc(struct link_params *params, return bnx2x_status; DP(NETIF_MSG_LINK, "About to update PFC in BMAC\n"); - if (CHIP_IS_E3(bp)) - bnx2x_update_pfc_xmac(params, vars, 0); - else { + + if (CHIP_IS_E3(bp)) { + if (vars->mac_type == MAC_TYPE_XMAC) + bnx2x_update_pfc_xmac(params, vars, 0); + } else { val = REG_RD(bp, MISC_REG_RESET_REG_2); if ((val & (MISC_REGISTERS_RESET_REG_2_RST_BMAC0 << params->port)) -- cgit v0.10.2 From 430d172a635c3dd791a56c59573418e02735b006 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 11 Sep 2012 04:34:11 +0000 Subject: bnx2x: display the correct duplex value Prior to this fix, the driver reported the chip's active duplex state is always 'full', even if using half-duplex mode. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 40a7b8d..b046beb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -5434,7 +5434,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, switch (speed_mask) { case GP_STATUS_10M: vars->line_speed = SPEED_10; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_10TFD; else vars->link_status |= LINK_10THD; @@ -5442,7 +5442,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, case GP_STATUS_100M: vars->line_speed = SPEED_100; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_100TXFD; else vars->link_status |= LINK_100TXHD; @@ -5451,7 +5451,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, case GP_STATUS_1G: case GP_STATUS_1G_KX: vars->line_speed = SPEED_1000; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_1000TFD; else vars->link_status |= LINK_1000THD; @@ -5459,7 +5459,7 @@ static int bnx2x_get_link_speed_duplex(struct bnx2x_phy *phy, case GP_STATUS_2_5G: vars->line_speed = SPEED_2500; - if (vars->duplex == DUPLEX_FULL) + if (is_duplex == DUPLEX_FULL) vars->link_status |= LINK_2500TFD; else vars->link_status |= LINK_2500THD; @@ -5533,6 +5533,7 @@ static int bnx2x_link_settings_status(struct bnx2x_phy *phy, if (gp_status & MDIO_GP_STATUS_TOP_AN_STATUS1_LINK_STATUS) { if (SINGLE_MEDIA_DIRECT(params)) { + vars->duplex = duplex; bnx2x_flow_ctrl_resolve(phy, params, vars, gp_status); if (phy->req_line_speed == SPEED_AUTO_NEG) bnx2x_xgxs_an_resolve(phy, params, vars, @@ -5627,6 +5628,7 @@ static int bnx2x_warpcore_read_status(struct bnx2x_phy *phy, LINK_STATUS_PARALLEL_DETECTION_USED; } bnx2x_ext_phy_resolve_fc(phy, params, vars); + vars->duplex = duplex; } } -- cgit v0.10.2 From 5cd75f0c0fd2b068dbd0ce3cb9460c3aafc0aae7 Mon Sep 17 00:00:00 2001 From: Yaniv Rosner Date: Tue, 11 Sep 2012 04:34:12 +0000 Subject: bnx2x: correct advertisement of pause capabilities This patch propagates users' requested flow-control into the link layer, which will later be used to advertise this flow-control for auto-negotiation (until now these values were ignored). Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index c37a68d..bbf4cf0 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -1587,6 +1587,12 @@ static int bnx2x_set_pauseparam(struct net_device *dev, bp->link_params.req_flow_ctrl[cfg_idx] = BNX2X_FLOW_CTRL_AUTO; } + bp->link_params.req_fc_auto_adv = BNX2X_FLOW_CTRL_NONE; + if (epause->rx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_RX; + + if (epause->tx_pause) + bp->link_params.req_fc_auto_adv |= BNX2X_FLOW_CTRL_TX; } DP(BNX2X_MSG_ETHTOOL, -- cgit v0.10.2 From 2ace95103df2bcb574c9da5df96807e9b46f9b38 Mon Sep 17 00:00:00 2001 From: Dmitry Kravkov Date: Tue, 11 Sep 2012 04:34:13 +0000 Subject: bnx2x: fix registers dumped Under traffic, there are several registers that when read (e.g., via 'ethtool -d') may cause the chip to stall. This patch corrects the registers read in such flows. Signed-off-by: Dmitry Kravkov Signed-off-by: Yuval Mintz Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h index 3e4cff9..b926f58 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dump.h @@ -401,11 +401,11 @@ static const struct reg_addr reg_addrs[] = { { 0x70000, 8, RI_ALL_ONLINE }, { 0x70020, 8184, RI_ALL_OFFLINE }, { 0x78000, 8192, RI_E3E3B0_OFFLINE }, - { 0x85000, 3, RI_ALL_ONLINE }, - { 0x8501c, 7, RI_ALL_ONLINE }, - { 0x85048, 1, RI_ALL_ONLINE }, - { 0x85200, 32, RI_ALL_ONLINE }, - { 0xb0000, 16384, RI_E1H_ONLINE }, + { 0x85000, 3, RI_ALL_OFFLINE }, + { 0x8501c, 7, RI_ALL_OFFLINE }, + { 0x85048, 1, RI_ALL_OFFLINE }, + { 0x85200, 32, RI_ALL_OFFLINE }, + { 0xb0000, 16384, RI_E1H_OFFLINE }, { 0xc1000, 7, RI_ALL_ONLINE }, { 0xc103c, 2, RI_E2E3E3B0_ONLINE }, { 0xc1800, 2, RI_ALL_ONLINE }, @@ -581,17 +581,12 @@ static const struct reg_addr reg_addrs[] = { { 0x140188, 3, RI_E1E1HE2E3_ONLINE }, { 0x140194, 13, RI_ALL_ONLINE }, { 0x140200, 6, RI_E1E1HE2E3_ONLINE }, - { 0x140220, 4, RI_E2E3_ONLINE }, - { 0x140240, 4, RI_E2E3_ONLINE }, { 0x140260, 4, RI_E2E3_ONLINE }, { 0x140280, 4, RI_E2E3_ONLINE }, - { 0x1402a0, 4, RI_E2E3_ONLINE }, - { 0x1402c0, 4, RI_E2E3_ONLINE }, { 0x1402e0, 2, RI_E2E3_ONLINE }, { 0x1402e8, 2, RI_E2E3E3B0_ONLINE }, { 0x1402f0, 9, RI_E2E3_ONLINE }, { 0x140314, 44, RI_E3B0_ONLINE }, - { 0x1403d0, 70, RI_E3B0_ONLINE }, { 0x144000, 4, RI_E1E1H_ONLINE }, { 0x148000, 4, RI_E1E1H_ONLINE }, { 0x14c000, 4, RI_E1E1H_ONLINE }, @@ -704,7 +699,6 @@ static const struct reg_addr reg_addrs[] = { { 0x180398, 1, RI_E2E3E3B0_ONLINE }, { 0x1803a0, 5, RI_E2E3E3B0_ONLINE }, { 0x1803b4, 2, RI_E3E3B0_ONLINE }, - { 0x180400, 1, RI_ALL_ONLINE }, { 0x180404, 255, RI_E1E1H_OFFLINE }, { 0x181000, 4, RI_ALL_ONLINE }, { 0x181010, 1020, RI_ALL_OFFLINE }, @@ -800,9 +794,9 @@ static const struct reg_addr reg_addrs[] = { { 0x1b905c, 1, RI_E3E3B0_ONLINE }, { 0x1b9064, 1, RI_E3B0_ONLINE }, { 0x1b9080, 10, RI_E3B0_ONLINE }, - { 0x1b9400, 14, RI_E2E3E3B0_ONLINE }, - { 0x1b943c, 19, RI_E2E3E3B0_ONLINE }, - { 0x1b9490, 10, RI_E2E3E3B0_ONLINE }, + { 0x1b9400, 14, RI_E2E3E3B0_OFFLINE }, + { 0x1b943c, 19, RI_E2E3E3B0_OFFLINE }, + { 0x1b9490, 10, RI_E2E3E3B0_OFFLINE }, { 0x1c0000, 2, RI_ALL_ONLINE }, { 0x200000, 65, RI_ALL_ONLINE }, { 0x20014c, 2, RI_E1HE2E3E3B0_ONLINE }, @@ -814,7 +808,6 @@ static const struct reg_addr reg_addrs[] = { { 0x200398, 1, RI_E2E3E3B0_ONLINE }, { 0x2003a0, 1, RI_E2E3E3B0_ONLINE }, { 0x2003a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x200400, 1, RI_ALL_ONLINE }, { 0x200404, 255, RI_E1E1H_OFFLINE }, { 0x202000, 4, RI_ALL_ONLINE }, { 0x202010, 2044, RI_ALL_OFFLINE }, @@ -921,7 +914,6 @@ static const struct reg_addr reg_addrs[] = { { 0x280398, 1, RI_E2E3E3B0_ONLINE }, { 0x2803a0, 1, RI_E2E3E3B0_ONLINE }, { 0x2803a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x280400, 1, RI_ALL_ONLINE }, { 0x280404, 255, RI_E1E1H_OFFLINE }, { 0x282000, 4, RI_ALL_ONLINE }, { 0x282010, 2044, RI_ALL_OFFLINE }, @@ -1031,7 +1023,6 @@ static const struct reg_addr reg_addrs[] = { { 0x300398, 1, RI_E2E3E3B0_ONLINE }, { 0x3003a0, 1, RI_E2E3E3B0_ONLINE }, { 0x3003a8, 2, RI_E2E3E3B0_ONLINE }, - { 0x300400, 1, RI_ALL_ONLINE }, { 0x300404, 255, RI_E1E1H_OFFLINE }, { 0x302000, 4, RI_ALL_ONLINE }, { 0x302010, 2044, RI_ALL_OFFLINE }, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index bbf4cf0..ebf40cd 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -775,7 +775,7 @@ static void bnx2x_get_regs(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); struct dump_hdr dump_hdr = {0}; - regs->version = 0; + regs->version = 1; memset(p, 0, regs->len); if (!netif_running(bp->dev)) -- cgit v0.10.2 From 7b5342d9026d537cbc01fd30b7cd9bac9b07b5ad Mon Sep 17 00:00:00 2001 From: Yuval Mintz Date: Tue, 11 Sep 2012 04:34:14 +0000 Subject: bnx2x: Add missing afex code Commit a334872224a67b614dc888460377862621f3dac7 added afex support but lacked several logical changes. This lack can cause afex to crash, and also have a slight effect on other flows (i.e., driver always assumes the Tx ring has less available buffers than what it actually has). This patch adds the missing segments, fixing said issues. Signed-off-by: Yuval Mintz Signed-off-by: Barak Witkowski Signed-off-by: Dmitry Kravkov Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h index 21b5532..dfd86a5 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.h @@ -710,17 +710,15 @@ static inline u16 bnx2x_tx_avail(struct bnx2x *bp, prod = txdata->tx_bd_prod; cons = txdata->tx_bd_cons; - /* NUM_TX_RINGS = number of "next-page" entries - It will be used as a threshold */ - used = SUB_S16(prod, cons) + (s16)NUM_TX_RINGS; + used = SUB_S16(prod, cons); #ifdef BNX2X_STOP_ON_ERROR WARN_ON(used < 0); - WARN_ON(used > bp->tx_ring_size); - WARN_ON((bp->tx_ring_size - used) > MAX_TX_AVAIL); + WARN_ON(used > txdata->tx_ring_size); + WARN_ON((txdata->tx_ring_size - used) > MAX_TX_AVAIL); #endif - return (s16)(bp->tx_ring_size) - used; + return (s16)(txdata->tx_ring_size) - used; } static inline int bnx2x_tx_queue_has_work(struct bnx2x_fp_txdata *txdata) @@ -1088,6 +1086,7 @@ static inline void bnx2x_init_txdata(struct bnx2x *bp, txdata->txq_index = txq_index; txdata->tx_cons_sb = tx_cons_sb; txdata->parent_fp = fp; + txdata->tx_ring_size = IS_FCOE_FP(fp) ? MAX_TX_AVAIL : bp->tx_ring_size; DP(NETIF_MSG_IFUP, "created tx data cid %d, txq %d\n", txdata->cid, txdata->txq_index); diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 2105498..211753e 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -7561,8 +7561,14 @@ int bnx2x_set_mac_one(struct bnx2x *bp, u8 *mac, } rc = bnx2x_config_vlan_mac(bp, &ramrod_param); - if (rc < 0) + + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + } else if (rc < 0) BNX2X_ERR("%s MAC failed\n", (set ? "Set" : "Del")); + return rc; } @@ -10294,13 +10300,11 @@ static void __devinit bnx2x_get_fcoe_info(struct bnx2x *bp) dev_info.port_hw_config[port]. fcoe_wwn_node_name_lower); } else if (!IS_MF_SD(bp)) { - u32 cfg = MF_CFG_RD(bp, func_ext_config[func].func_cfg); - /* * Read the WWN info only if the FCoE feature is enabled for * this function. */ - if (cfg & MACP_FUNC_CFG_FLAGS_FCOE_OFFLOAD) + if (BNX2X_MF_EXT_PROTOCOL_FCOE(bp) && !CHIP_IS_E1x(bp)) bnx2x_get_ext_wwn_info(bp, func); } else if (IS_MF_FCOE_SD(bp)) @@ -11073,7 +11077,14 @@ static int bnx2x_set_uc_list(struct bnx2x *bp) netdev_for_each_uc_addr(ha, dev) { rc = bnx2x_set_mac_one(bp, bnx2x_uc_addr(ha), mac_obj, true, BNX2X_UC_LIST_MAC, &ramrod_flags); - if (rc < 0) { + if (rc == -EEXIST) { + DP(BNX2X_MSG_SP, + "Failed to schedule ADD operations: %d\n", rc); + /* do not treat adding same MAC as error */ + rc = 0; + + } else if (rc < 0) { + BNX2X_ERR("Failed to schedule ADD operations: %d\n", rc); return rc; -- cgit v0.10.2 From 07f377da7e8a7d3c3a6626333516f9c808637c9e Mon Sep 17 00:00:00 2001 From: Bernhard Froemel Date: Sat, 25 Aug 2012 10:30:49 +0200 Subject: apple-gmux: Obtain version info from indexed gmux This patch extracts and displays version information from the indexed gmux device as it is also done for the classic gmux device. Signed-off-by: Bernhard Froemel Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index dfb1a92..c9558d1 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -461,18 +461,22 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, ver_release = gmux_read8(gmux_data, GMUX_PORT_VERSION_RELEASE); if (ver_major == 0xff && ver_minor == 0xff && ver_release == 0xff) { if (gmux_is_indexed(gmux_data)) { + u32 version; mutex_init(&gmux_data->index_lock); gmux_data->indexed = true; + version = gmux_read32(gmux_data, + GMUX_PORT_VERSION_MAJOR); + ver_major = (version >> 24) & 0xff; + ver_minor = (version >> 16) & 0xff; + ver_release = (version >> 8) & 0xff; } else { pr_info("gmux device not present\n"); ret = -ENODEV; goto err_release; } - pr_info("Found indexed gmux\n"); - } else { - pr_info("Found gmux version %d.%d.%d\n", ver_major, ver_minor, - ver_release); } + pr_info("Found gmux version %d.%d.%d [%s]\n", ver_major, ver_minor, + ver_release, (gmux_data->indexed ? "indexed" : "classic")); memset(&props, 0, sizeof(props)); props.type = BACKLIGHT_PLATFORM; -- cgit v0.10.2 From c5a5052923c55990e32a3d64bdb4779b01162646 Mon Sep 17 00:00:00 2001 From: Bernhard Froemel Date: Sat, 25 Aug 2012 10:30:48 +0200 Subject: apple-gmux: Fix index read functions Study of Apple's binary driver revealed that the GMUX_READ_PORT should be written between calls to gmux_index_wait_ready and gmux_index_wait_complete (i.e., the new index protocol must be followed). If this is not done correctly, the indexed gmux device only partially accepts writes which lead to problems concerning GPU switching. Special thanks to Seth Forshee who helped greatly with identifying unnecessary changes. Signed-off-by: Bernhard Froemel Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index c9558d1..0e43477 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -142,8 +142,9 @@ static u8 gmux_index_read8(struct apple_gmux_data *gmux_data, int port) u8 val; mutex_lock(&gmux_data->index_lock); - outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); gmux_index_wait_ready(gmux_data); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_complete(gmux_data); val = inb(gmux_data->iostart + GMUX_PORT_VALUE); mutex_unlock(&gmux_data->index_lock); @@ -166,8 +167,9 @@ static u32 gmux_index_read32(struct apple_gmux_data *gmux_data, int port) u32 val; mutex_lock(&gmux_data->index_lock); - outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); gmux_index_wait_ready(gmux_data); + outb((port & 0xff), gmux_data->iostart + GMUX_PORT_READ); + gmux_index_wait_complete(gmux_data); val = inl(gmux_data->iostart + GMUX_PORT_VALUE); mutex_unlock(&gmux_data->index_lock); -- cgit v0.10.2 From e6d9d3d59ca08fc87688c5953061b4da0d17bf15 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Tue, 21 Aug 2012 21:56:49 -0500 Subject: apple-gmux: Fix port address calculation in gmux_pio_write32() This function fails to add the start address of the gmux I/O range to the requested port address and thus writes to the wrong location. Signed-off-by: Seth Forshee Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 0e43477..5c17ba8 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -101,7 +101,7 @@ static void gmux_pio_write32(struct apple_gmux_data *gmux_data, int port, for (i = 0; i < 4; i++) { tmpval = (val >> (i * 8)) & 0xff; - outb(tmpval, port + i); + outb(tmpval, gmux_data->iostart + port + i); } } -- cgit v0.10.2 From 689db7843d503fae0eb46cb849e4caab35588170 Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 20 Aug 2012 23:01:50 +0200 Subject: drivers-platform-x86: remove useless #ifdef CONFIG_ACPI_VIDEO Signed-off-by: Corentin Chary Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 3782e1c..934d861 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -2196,10 +2196,8 @@ static int __init acer_wmi_init(void) interface->capability &= ~ACER_CAP_BRIGHTNESS; pr_info("Brightness must be controlled by acpi video driver\n"); } else { -#ifdef CONFIG_ACPI_VIDEO pr_info("Disabling ACPI video driver\n"); acpi_video_unregister(); -#endif } if (wmi_has_guid(WMID_GUID3)) { diff --git a/drivers/platform/x86/apple-gmux.c b/drivers/platform/x86/apple-gmux.c index 5c17ba8..db8f638 100644 --- a/drivers/platform/x86/apple-gmux.c +++ b/drivers/platform/x86/apple-gmux.c @@ -511,9 +511,7 @@ static int __devinit gmux_probe(struct pnp_dev *pnp, * Disable the other backlight choices. */ acpi_video_dmi_promote_vendor(); -#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_unregister(); -#endif apple_bl_unregister(); gmux_data->power_state = VGA_SWITCHEROO_ON; @@ -599,9 +597,7 @@ static void __devexit gmux_remove(struct pnp_dev *pnp) kfree(gmux_data); acpi_video_dmi_demote_vendor(); -#if defined (CONFIG_ACPI_VIDEO) || defined (CONFIG_ACPI_VIDEO_MODULE) acpi_video_register(); -#endif apple_bl_register(); } diff --git a/drivers/platform/x86/asus-wmi.c b/drivers/platform/x86/asus-wmi.c index 2eb9fe8..c0e9ff4 100644 --- a/drivers/platform/x86/asus-wmi.c +++ b/drivers/platform/x86/asus-wmi.c @@ -47,9 +47,7 @@ #include #include #include -#ifdef CONFIG_ACPI_VIDEO #include -#endif #include "asus-wmi.h" @@ -1704,10 +1702,8 @@ static int asus_wmi_add(struct platform_device *pdev) if (asus->driver->quirks->wmi_backlight_power) acpi_video_dmi_promote_vendor(); if (!acpi_video_backlight_support()) { -#ifdef CONFIG_ACPI_VIDEO pr_info("Disabling ACPI video driver\n"); acpi_video_unregister(); -#endif err = asus_wmi_backlight_init(asus); if (err && err != -ENODEV) goto fail_backlight; diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index c1ca7bc..dd90d15 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -26,9 +26,7 @@ #include #include #include -#ifdef CONFIG_ACPI_VIDEO #include -#endif /* * This driver is needed because a number of Samsung laptops do not hook @@ -1558,9 +1556,7 @@ static int __init samsung_init(void) samsung->handle_backlight = false; } else if (samsung->quirks->broken_acpi_video) { pr_info("Disabling ACPI video driver\n"); -#ifdef CONFIG_ACPI_VIDEO acpi_video_unregister(); -#endif } #endif -- cgit v0.10.2 From 8871e99f89b7d7b1ea99de550eea2a56273f42ab Mon Sep 17 00:00:00 2001 From: Corentin Chary Date: Mon, 20 Aug 2012 23:01:51 +0200 Subject: asus-laptop: HRWS/HWRS typo Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=24222 Signed-off-by: Corentin Chary Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index e38f91b..110c777 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -863,9 +863,9 @@ static ssize_t show_infos(struct device *dev, * The significance of others is yet to be found. * If we don't find the method, we assume the device are present. */ - rv = acpi_evaluate_integer(asus->handle, "HRWS", NULL, &temp); + rv = acpi_evaluate_integer(asus->handle, "HWRS", NULL, &temp); if (!ACPI_FAILURE(rv)) - len += sprintf(page + len, "HRWS value : %#x\n", + len += sprintf(page + len, "HWRS value : %#x\n", (uint) temp); /* * Another value for userspace: the ASYM method returns 0x02 for @@ -1751,9 +1751,9 @@ static int asus_laptop_get_info(struct asus_laptop *asus) * The significance of others is yet to be found. */ status = - acpi_evaluate_integer(asus->handle, "HRWS", NULL, &hwrs_result); + acpi_evaluate_integer(asus->handle, "HWRS", NULL, &hwrs_result); if (!ACPI_FAILURE(status)) - pr_notice(" HRWS returned %x", (int)hwrs_result); + pr_notice(" HWRS returned %x", (int)hwrs_result); if (!acpi_check_handle(asus->handle, METHOD_WL_STATUS, NULL)) asus->have_rsts = true; -- cgit v0.10.2 From 3f5449bf39896587ca9f87b76832c5aa30f0f5c7 Mon Sep 17 00:00:00 2001 From: Maxim Nikulin Date: Mon, 20 Aug 2012 23:01:52 +0200 Subject: platform/x86: fix asus_laptop.wled_type description MODULE_PARM_DESC for wlan_status is further in the same file Signed-off-by: Maxim A. Nikulin Signed-off-by: Corentin Chary Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c index 110c777..4b568df 100644 --- a/drivers/platform/x86/asus-laptop.c +++ b/drivers/platform/x86/asus-laptop.c @@ -85,7 +85,7 @@ static char *wled_type = "unknown"; static char *bled_type = "unknown"; module_param(wled_type, charp, 0444); -MODULE_PARM_DESC(wlan_status, "Set the wled type on boot " +MODULE_PARM_DESC(wled_type, "Set the wled type on boot " "(unknown, led or rfkill). " "default is unknown"); -- cgit v0.10.2 From f661848b74b33069b0b7068c414bd282c407781d Mon Sep 17 00:00:00 2001 From: Jiang Liu Date: Fri, 14 Sep 2012 00:21:59 +0800 Subject: eeepc-laptop: fix device reference count leakage in eeepc_rfkill_hotplug() Fix a device reference count leakage issue in function eeepc_rfkill_hotplug(). Signed-off-by: Jiang Liu Signed-off-by: Bjorn Helgaas Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c index dab91b4..5ca2641 100644 --- a/drivers/platform/x86/eeepc-laptop.c +++ b/drivers/platform/x86/eeepc-laptop.c @@ -610,12 +610,12 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) if (!bus) { pr_warn("Unable to find PCI bus 1?\n"); - goto out_unlock; + goto out_put_dev; } if (pci_bus_read_config_dword(bus, 0, PCI_VENDOR_ID, &l)) { pr_err("Unable to read PCI config space?\n"); - goto out_unlock; + goto out_put_dev; } absent = (l == 0xffffffff); @@ -627,7 +627,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) absent ? "absent" : "present"); pr_warn("skipped wireless hotplug as probably " "inappropriate for this model\n"); - goto out_unlock; + goto out_put_dev; } if (!blocked) { @@ -635,7 +635,7 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) if (dev) { /* Device already present */ pci_dev_put(dev); - goto out_unlock; + goto out_put_dev; } dev = pci_scan_single_device(bus, 0); if (dev) { @@ -650,6 +650,8 @@ static void eeepc_rfkill_hotplug(struct eeepc_laptop *eeepc, acpi_handle handle) pci_dev_put(dev); } } +out_put_dev: + pci_dev_put(port); } out_unlock: -- cgit v0.10.2 From eceeb4371240aff22e9a535a2bc57d2311820942 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Sat, 1 Sep 2012 12:54:07 -0700 Subject: thinkpad_acpi: buffer overflow in fan_get_status() The acpi_evalf() function modifies four bytes of data but in fan_get_status() we pass a pointer to u8. I have modified the function to use type checking now. Signed-off-by: Dan Carpenter Signed-off-by: Matthew Garrett diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index 80e3779..52daaa8 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -545,7 +545,7 @@ TPACPI_HANDLE(hkey, ec, "\\_SB.HKEY", /* 600e/x, 770e, 770x */ */ static int acpi_evalf(acpi_handle handle, - void *res, char *method, char *fmt, ...) + int *res, char *method, char *fmt, ...) { char *fmt0 = fmt; struct acpi_object_list params; @@ -606,7 +606,7 @@ static int acpi_evalf(acpi_handle handle, success = (status == AE_OK && out_obj.type == ACPI_TYPE_INTEGER); if (success && res) - *(int *)res = out_obj.integer.value; + *res = out_obj.integer.value; break; case 'v': /* void */ success = status == AE_OK; @@ -7386,17 +7386,18 @@ static int fan_get_status(u8 *status) * Add TPACPI_FAN_RD_ACPI_FANS ? */ switch (fan_status_access_mode) { - case TPACPI_FAN_RD_ACPI_GFAN: + case TPACPI_FAN_RD_ACPI_GFAN: { /* 570, 600e/x, 770e, 770x */ + int res; - if (unlikely(!acpi_evalf(gfan_handle, &s, NULL, "d"))) + if (unlikely(!acpi_evalf(gfan_handle, &res, NULL, "d"))) return -EIO; if (likely(status)) - *status = s & 0x07; + *status = res & 0x07; break; - + } case TPACPI_FAN_RD_TPEC: /* all except 570, 600e/x, 770e, 770x */ if (unlikely(!acpi_ec_read(fan_status_offset, &s))) -- cgit v0.10.2 From 6af773e786ad617b0264ebe06ba60675c01f3e51 Mon Sep 17 00:00:00 2001 From: Nishank Trivedi Date: Wed, 12 Sep 2012 13:32:49 +0000 Subject: pktgen: fix crash with vlan and packet size less than 46 If vlan option is being specified in the pktgen and packet size being requested is less than 46 bytes, despite being illogical request, pktgen should not crash the kernel. BUG: unable to handle kernel paging request at ffff88021fb82000 Process kpktgend_0 (pid: 1184, threadinfo ffff880215f1a000, task ffff880218544530) Call Trace: [] ? pktgen_finalize_skb+0x222/0x300 [pktgen] [] ? build_skb+0x34/0x1c0 [] pktgen_thread_worker+0x5d1/0x1790 [pktgen] [] ? igb_xmit_frame_ring+0xa30/0xa30 [igb] [] ? wake_up_bit+0x40/0x40 [] ? wake_up_bit+0x40/0x40 [] ? spin+0x240/0x240 [pktgen] [] kthread+0x93/0xa0 [] kernel_thread_helper+0x4/0x10 [] ? flush_kthread_worker+0x80/0x80 [] ? gs_change+0x13/0x13 The root cause of why pktgen is not able to handle this case is due to comparison of signed (datalen) and unsigned data (sizeof), which eventually passes a huge number to skb_put(). Signed-off-by: Nishank Trivedi Signed-off-by: David S. Miller diff --git a/net/core/pktgen.c b/net/core/pktgen.c index cce9e53..148e73d 100644 --- a/net/core/pktgen.c +++ b/net/core/pktgen.c @@ -2721,7 +2721,7 @@ static struct sk_buff *fill_packet_ipv4(struct net_device *odev, /* Eth + IPh + UDPh + mpls */ datalen = pkt_dev->cur_pkt_size - 14 - 20 - 8 - pkt_dev->pkt_overhead; - if (datalen < sizeof(struct pktgen_hdr)) + if (datalen < 0 || datalen < sizeof(struct pktgen_hdr)) datalen = sizeof(struct pktgen_hdr); udph->source = htons(pkt_dev->cur_udp_src); -- cgit v0.10.2 From 8f7412a792bc989d1bddd3c802282eec09456d57 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 14 Sep 2012 00:26:24 +0200 Subject: ACPI / PM: Infer parent power state from child if unknown, v2 It turns out that there are ACPI BIOSes defining device objects with _PSx and without either _PSC or _PRx. For devices corresponding to those ACPI objetcs __acpi_bus_get_power() returns ACPI_STATE_UNKNOWN and their initial power states are regarded as unknown as a result. If such a device is a parent of another power-manageable device, the child cannot be put into a low-power state through ACPI, because __acpi_bus_set_power() refuses to change power states of devices whose parents' power states are unknown. To work around this problem, observe that the ACPI power state of a device cannot be higher-power (lower-number) than the power state of its parent. Thus, if the device's _PSC method or the configuration of its power resources indicates that the device is in D0, the device's parent has to be in D0 as well. Consequently, if the parent's power state is unknown when we've just learned that its child's power state is D0, we can safely set the parent's power.state field to ACPI_STATE_D0. Tested-by: Aaron Lu Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c index 9628652..e059695 100644 --- a/drivers/acpi/bus.c +++ b/drivers/acpi/bus.c @@ -237,6 +237,16 @@ static int __acpi_bus_get_power(struct acpi_device *device, int *state) } else if (result == ACPI_STATE_D3_HOT) { result = ACPI_STATE_D3; } + + /* + * If we were unsure about the device parent's power state up to this + * point, the fact that the device is in D0 implies that the parent has + * to be in D0 too. + */ + if (device->parent && device->parent->power.state == ACPI_STATE_UNKNOWN + && result == ACPI_STATE_D0) + device->parent->power.state = ACPI_STATE_D0; + *state = result; out: -- cgit v0.10.2 From 40bf66ec9791f1452b90b82aadc3b6e6aee201f5 Mon Sep 17 00:00:00 2001 From: Lin Ming Date: Fri, 14 Sep 2012 00:26:33 +0200 Subject: ACPI / PM: Fix resource_lock dead lock in acpi_power_on_device Commit 0090def("ACPI: Add interface to register/unregister device to/from power resources") used resource_lock to protect the devices list that relies on power resource. It caused a mutex dead lock, as below acpi_power_on ---> lock resource_lock __acpi_power_on acpi_power_on_device acpi_power_get_inferred_state acpi_power_get_list_state ---> lock resource_lock This patch adds a new mutex "devices_lock" to protect the devices list and calls acpi_power_on_device in acpi_power_on, instead of __acpi_power_on, after the resource_lock is released. [rjw: Changed data type of a boolean variable to bool.] Signed-off-by: Lin Ming Signed-off-by: Aaron Lu Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index fc18034..cc2a2dc 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -107,6 +107,7 @@ struct acpi_power_resource { /* List of devices relying on this power resource */ struct acpi_power_resource_device *devices; + struct mutex devices_lock; }; static struct list_head acpi_power_resource_list; @@ -225,7 +226,6 @@ static void acpi_power_on_device(struct acpi_power_managed_device *device) static int __acpi_power_on(struct acpi_power_resource *resource) { - struct acpi_power_resource_device *device_list = resource->devices; acpi_status status = AE_OK; status = acpi_evaluate_object(resource->device->handle, "_ON", NULL, NULL); @@ -238,19 +238,15 @@ static int __acpi_power_on(struct acpi_power_resource *resource) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "Power resource [%s] turned on\n", resource->name)); - while (device_list) { - acpi_power_on_device(device_list->device); - - device_list = device_list->next; - } - return 0; } static int acpi_power_on(acpi_handle handle) { int result = 0; + bool resume_device = false; struct acpi_power_resource *resource = NULL; + struct acpi_power_resource_device *device_list; result = acpi_power_get_context(handle, &resource); if (result) @@ -266,10 +262,25 @@ static int acpi_power_on(acpi_handle handle) result = __acpi_power_on(resource); if (result) resource->ref_count--; + else + resume_device = true; } mutex_unlock(&resource->resource_lock); + if (!resume_device) + return result; + + mutex_lock(&resource->devices_lock); + + device_list = resource->devices; + while (device_list) { + acpi_power_on_device(device_list->device); + device_list = device_list->next; + } + + mutex_unlock(&resource->devices_lock); + return result; } @@ -355,7 +366,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev, if (acpi_power_get_context(res_handle, &resource)) return; - mutex_lock(&resource->resource_lock); + mutex_lock(&resource->devices_lock); prev = NULL; curr = resource->devices; while (curr) { @@ -372,7 +383,7 @@ static void __acpi_power_resource_unregister_device(struct device *dev, prev = curr; curr = curr->next; } - mutex_unlock(&resource->resource_lock); + mutex_unlock(&resource->devices_lock); } /* Unlink dev from all power resources in _PR0 */ @@ -414,10 +425,10 @@ static int __acpi_power_resource_register_device( power_resource_device->device = powered_device; - mutex_lock(&resource->resource_lock); + mutex_lock(&resource->devices_lock); power_resource_device->next = resource->devices; resource->devices = power_resource_device; - mutex_unlock(&resource->resource_lock); + mutex_unlock(&resource->devices_lock); return 0; } @@ -721,6 +732,7 @@ static int acpi_power_add(struct acpi_device *device) resource->device = device; mutex_init(&resource->resource_lock); + mutex_init(&resource->devices_lock); strcpy(resource->name, device->pnp.bus_id); strcpy(acpi_device_name(device), ACPI_POWER_DEVICE_NAME); strcpy(acpi_device_class(device), ACPI_POWER_CLASS); -- cgit v0.10.2 From dd03e73481564fe57655d37154f84a0af00cb449 Mon Sep 17 00:00:00 2001 From: Yishai Hadas Date: Wed, 29 Aug 2012 15:14:35 +0000 Subject: mlx4_core: Fix integer overflows so 8TBs of memory registration works This patch adds on the fixes done in commits 89dd86db78e0 ("mlx4_core: Allow large mlx4_buddy bitmaps") and 3de819e6b642 ("mlx4_core: Fix integer overflow issues around MTT table") so that memory registration of up to 8TB (log_num_mtt=31) finally works. It fixes integer overflows in a few mlx4_table_yyy routines in icm.c by using a u64 intermediate variable, and int/uint issues that caused table indexes to become nagive by setting some variables to be u32 instead of int. These problems cause crashes when a user attempted to register > 512GB of RAM. Signed-off-by: Yishai Hadas Signed-off-by: Or Gerlitz Signed-off-by: Roland Dreier diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.c b/drivers/net/ethernet/mellanox/mlx4/icm.c index daf4179..31d0264 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.c +++ b/drivers/net/ethernet/mellanox/mlx4/icm.c @@ -227,9 +227,10 @@ int mlx4_UNMAP_ICM_AUX(struct mlx4_dev *dev) MLX4_CMD_TIME_CLASS_B, MLX4_CMD_NATIVE); } -int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) +int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj) { - int i = (obj & (table->num_obj - 1)) / (MLX4_TABLE_CHUNK_SIZE / table->obj_size); + u32 i = (obj & (table->num_obj - 1)) / + (MLX4_TABLE_CHUNK_SIZE / table->obj_size); int ret = 0; mutex_lock(&table->mutex); @@ -262,16 +263,18 @@ out: return ret; } -void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) +void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj) { - int i; + u32 i; + u64 offset; i = (obj & (table->num_obj - 1)) / (MLX4_TABLE_CHUNK_SIZE / table->obj_size); mutex_lock(&table->mutex); if (--table->icm[i]->refcount == 0) { - mlx4_UNMAP_ICM(dev, table->virt + i * MLX4_TABLE_CHUNK_SIZE, + offset = (u64) i * MLX4_TABLE_CHUNK_SIZE; + mlx4_UNMAP_ICM(dev, table->virt + offset, MLX4_TABLE_CHUNK_SIZE / MLX4_ICM_PAGE_SIZE); mlx4_free_icm(dev, table->icm[i], table->coherent); table->icm[i] = NULL; @@ -280,9 +283,11 @@ void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj) mutex_unlock(&table->mutex); } -void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle) +void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj, + dma_addr_t *dma_handle) { - int idx, offset, dma_offset, i; + int offset, dma_offset, i; + u64 idx; struct mlx4_icm_chunk *chunk; struct mlx4_icm *icm; struct page *page = NULL; @@ -292,7 +297,7 @@ void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_han mutex_lock(&table->mutex); - idx = (obj & (table->num_obj - 1)) * table->obj_size; + idx = (u64) (obj & (table->num_obj - 1)) * table->obj_size; icm = table->icm[idx / MLX4_TABLE_CHUNK_SIZE]; dma_offset = offset = idx % MLX4_TABLE_CHUNK_SIZE; @@ -326,10 +331,11 @@ out: } int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end) + u32 start, u32 end) { int inc = MLX4_TABLE_CHUNK_SIZE / table->obj_size; - int i, err; + int err; + u32 i; for (i = start; i <= end; i += inc) { err = mlx4_table_get(dev, table, i); @@ -349,9 +355,9 @@ fail: } void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end) + u32 start, u32 end) { - int i; + u32 i; for (i = start; i <= end; i += MLX4_TABLE_CHUNK_SIZE / table->obj_size) mlx4_table_put(dev, table, i); diff --git a/drivers/net/ethernet/mellanox/mlx4/icm.h b/drivers/net/ethernet/mellanox/mlx4/icm.h index a67744f..dee67fa 100644 --- a/drivers/net/ethernet/mellanox/mlx4/icm.h +++ b/drivers/net/ethernet/mellanox/mlx4/icm.h @@ -71,17 +71,17 @@ struct mlx4_icm *mlx4_alloc_icm(struct mlx4_dev *dev, int npages, gfp_t gfp_mask, int coherent); void mlx4_free_icm(struct mlx4_dev *dev, struct mlx4_icm *icm, int coherent); -int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj); -void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, int obj); +int mlx4_table_get(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj); +void mlx4_table_put(struct mlx4_dev *dev, struct mlx4_icm_table *table, u32 obj); int mlx4_table_get_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end); + u32 start, u32 end); void mlx4_table_put_range(struct mlx4_dev *dev, struct mlx4_icm_table *table, - int start, int end); + u32 start, u32 end); int mlx4_init_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table, u64 virt, int obj_size, u32 nobj, int reserved, int use_lowmem, int use_coherent); void mlx4_cleanup_icm_table(struct mlx4_dev *dev, struct mlx4_icm_table *table); -void *mlx4_table_find(struct mlx4_icm_table *table, int obj, dma_addr_t *dma_handle); +void *mlx4_table_find(struct mlx4_icm_table *table, u32 obj, dma_addr_t *dma_handle); static inline void mlx4_icm_first(struct mlx4_icm *icm, struct mlx4_icm_iter *iter) -- cgit v0.10.2 From c618a9be0e8c0f36baee2560860a0118a428fb26 Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 11 Sep 2012 17:21:44 +0200 Subject: dmaengine: at_hdmac: fix comment in atc_prep_slave_sg() s/dma_memcpy/slave_sg/ and it is sg length that we are talking about. Signed-off-by: Nicolas Ferre Cc: Stable [2.6.31+] Signed-off-by: Vinod Koul diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 3934fcc..6c09e18 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -661,7 +661,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, flags); if (unlikely(!atslave || !sg_len)) { - dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n"); + dev_dbg(chan2dev(chan), "prep_slave_sg: sg length is zero!\n"); return NULL; } -- cgit v0.10.2 From c456797681db814f4f5b36909e8e94047bf53d9c Mon Sep 17 00:00:00 2001 From: Nicolas Ferre Date: Tue, 11 Sep 2012 17:21:45 +0200 Subject: dmaengine: at_hdmac: check that each sg data length is non-null Avoid the construction of a malformed DMA request sent to the DMA controller. Log message is for debug only because this condition is unlikely to append and may only trigger at driver development time. Signed-off-by: Nicolas Ferre Cc: Stable [2.6.31+] Signed-off-by: Vinod Koul diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6c09e18..7ab6e26 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -689,6 +689,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, mem = sg_dma_address(sg); len = sg_dma_len(sg); + if (unlikely(!len)) { + dev_dbg(chan2dev(chan), + "prep_slave_sg: sg(%d) data length is zero\n", i); + goto err; + } mem_width = 2; if (unlikely(mem & 3 || len & 3)) mem_width = 0; @@ -724,6 +729,11 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, mem = sg_dma_address(sg); len = sg_dma_len(sg); + if (unlikely(!len)) { + dev_dbg(chan2dev(chan), + "prep_slave_sg: sg(%d) data length is zero\n", i); + goto err; + } mem_width = 2; if (unlikely(mem & 3 || len & 3)) mem_width = 0; @@ -757,6 +767,7 @@ atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, err_desc_get: dev_err(chan2dev(chan), "not enough descriptors available\n"); +err: atc_desc_put(atchan, first); return NULL; } -- cgit v0.10.2 From 610bd7da160f76f1644ecb4cd7f39511b49a22cc Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 14 Sep 2012 13:28:23 +1000 Subject: drm/nouveau: fix booting with plymouth + dumb support We noticed a plymouth bug on Fedora 18, and I then noticed this stupid thinko, fixing it fixed the problem with plymouth. Cc: stable@vger.kernel.org Acked-by: Ben Skeggs Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/nouveau_display.c b/drivers/gpu/drm/nouveau/nouveau_display.c index 69688ef..7e16dc5 100644 --- a/drivers/gpu/drm/nouveau/nouveau_display.c +++ b/drivers/gpu/drm/nouveau/nouveau_display.c @@ -598,7 +598,7 @@ nouveau_display_dumb_create(struct drm_file *file_priv, struct drm_device *dev, args->size = args->pitch * args->height; args->size = roundup(args->size, PAGE_SIZE); - ret = nouveau_gem_new(dev, args->size, 0, TTM_PL_FLAG_VRAM, 0, 0, &bo); + ret = nouveau_gem_new(dev, args->size, 0, NOUVEAU_GEM_DOMAIN_VRAM, 0, 0, &bo); if (ret) return ret; -- cgit v0.10.2 From 4a5b2b269e2780790687cfc7c2fc438cb6d8964e Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 12 Sep 2012 18:03:26 +0200 Subject: MAINTAINERS: fix tree for current i2c-embedded development Guide people to where their patches can be found these days. Signed-off-by: Wolfram Sang Acked-by: Jean Delvare Acked-by: Ben Dooks diff --git a/MAINTAINERS b/MAINTAINERS index fdc0119..53cc13c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3388,7 +3388,7 @@ M: "Wolfram Sang (embedded platforms)" L: linux-i2c@vger.kernel.org W: http://i2c.wiki.kernel.org/ T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ -T: git git://git.fluff.org/bjdooks/linux.git +T: git git://git.pengutronix.de/git/wsa/linux.git S: Maintained F: Documentation/i2c/ F: drivers/i2c/ -- cgit v0.10.2 From 5f71a3ef3753ac2068009637eee619e163f44b30 Mon Sep 17 00:00:00 2001 From: Thomas Kavanagh Date: Thu, 13 Sep 2012 08:16:55 -0700 Subject: i2c: algo: pca: Fix mode selection for PCA9665 The code currently always selects turbo mode for PCA9665, no matter which clock frequency is configured. This is because it compares the clock frequency against constants reflecting (boundary / 100). Compare against real boundary frequencies to fix the problem. Signed-off-by: Thomas Kavanagh Signed-off-by: Guenter Roeck Signed-off-by: Wolfram Sang diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 73133b1..6f5f98d 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -476,17 +476,17 @@ static int pca_init(struct i2c_adapter *adap) /* To avoid integer overflow, use clock/100 for calculations */ clock = pca_clock(pca_data) / 100; - if (pca_data->i2c_clock > 10000) { + if (pca_data->i2c_clock > 1000000) { mode = I2C_PCA_MODE_TURBO; min_tlow = 14; min_thi = 5; raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */ - } else if (pca_data->i2c_clock > 4000) { + } else if (pca_data->i2c_clock > 400000) { mode = I2C_PCA_MODE_FASTP; min_tlow = 17; min_thi = 9; raise_fall_time = 22; /* Raise 11e-8s, Fall 11e-8s */ - } else if (pca_data->i2c_clock > 1000) { + } else if (pca_data->i2c_clock > 100000) { mode = I2C_PCA_MODE_FAST; min_tlow = 44; min_thi = 20; -- cgit v0.10.2 From 27e99ade81368e6fdda3212bff9345177cf9e57a Mon Sep 17 00:00:00 2001 From: Wang Sen Date: Mon, 30 Jul 2012 14:25:06 +0800 Subject: [SCSI] scsi: virtio-scsi: Fix address translation failure of HighMem pages used by sg list When using the commands below to write some data to a virtio-scsi LUN of the QEMU guest(32-bit) with 1G physical memory(qemu -m 1024), the qemu will crash. # sudo mkfs.ext4 /dev/sdb (/dev/sdb is the virtio-scsi LUN.) # sudo mount /dev/sdb /mnt # dd if=/dev/zero of=/mnt/file bs=1M count=1024 In current implementation, sg_set_buf is called to add buffers to sg list which is put into the virtqueue eventually. But if there are some HighMem pages in table->sgl you can not get virtual address by sg_virt. So, sg_virt(sg_elem) may return NULL value. This will cause QEMU exit when virtqueue_map_sg is called in QEMU because an invalid GPA is passed by virtqueue. Two solutions are discussed here: http://lkml.indiana.edu/hypermail/linux/kernel/1207.3/00675.html Finally, value assignment approach was adopted because: Value assignment creates a well-formed scatterlist, because the termination marker in source sg_list has been set in blk_rq_map_sg(). The last entry of the source sg_list is just copied to the the last entry in destination list. Note that, for now, virtio_ring does not care about the form of the scatterlist and simply processes the first out_num + in_num consecutive elements of the sg[] array. I have tested the patch on my workstation. QEMU would not crash any more. Cc: # 3.4: 4fe74b1: [SCSI] virtio-scsi: SCSI driver Signed-off-by: Wang Sen Acked-by: Paolo Bonzini Signed-off-by: James Bottomley diff --git a/drivers/scsi/virtio_scsi.c b/drivers/scsi/virtio_scsi.c index c7030fb..3e79a2f 100644 --- a/drivers/scsi/virtio_scsi.c +++ b/drivers/scsi/virtio_scsi.c @@ -331,7 +331,7 @@ static void virtscsi_map_sgl(struct scatterlist *sg, unsigned int *p_idx, int i; for_each_sg(table->sgl, sg_elem, table->nents, i) - sg_set_buf(&sg[idx++], sg_virt(sg_elem), sg_elem->length); + sg[idx++] = *sg_elem; *p_idx = idx; } -- cgit v0.10.2 From 636221b86ce0b3b1238c72bad7172d5227d408ac Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Thu, 13 Sep 2012 21:23:25 +0100 Subject: MIPS: Malta: Remove RTC Data Mode bootstrap breakage YAMON requires and enforces the RTC Data Mode (Register B, DM bit) to binary, that is the bit is set every time the board goes through the firmware bootstrap sequence. Likewise its calendar manipulation commands interpret or set the RTC registers unconditionally as binary, never actually checking what the value of the DM bit is, under the (correct) assumption that it has been previously set, to indicate the binary mode. A change to Linux a while ago however introduced a platform-specific tweak that clears that bit and therefore forces the data mode to BCD. This causes clock corruption and misinterpretation that has to be fixed up by user-mode tools in system startup scripts as the initial clock is often incorrect according to the BCD interpretation forced. This change removes the hack; a comment included refers to alarm code, but even if it was broken at one point by requiring the BCD mode, it should have been trivially corrected and even if not, given how rarely the alarm feature is used, that was not really a reasonable justification to break the system clock that is indeed used by virtually everything. And either way the alarm code has been since fixed anyway. Signed-off-by: Maciej W. Rozycki Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/4336/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/mti-malta/malta-platform.c b/arch/mips/mti-malta/malta-platform.c index 4c35301..80562b8 100644 --- a/arch/mips/mti-malta/malta-platform.c +++ b/arch/mips/mti-malta/malta-platform.c @@ -138,11 +138,6 @@ static int __init malta_add_devices(void) if (err) return err; - /* - * Set RTC to BCD mode to support current alarm code. - */ - CMOS_WRITE(CMOS_READ(RTC_CONTROL) & ~RTC_DM_BINARY, RTC_CONTROL); - return 0; } -- cgit v0.10.2 From 7149f2558d5b5b988726662fe58b1c388337805b Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 12 Sep 2012 18:02:46 -0700 Subject: eCryptfs: Write out all dirty pages just before releasing the lower file Fixes a regression caused by: 821f749 eCryptfs: Revert to a writethrough cache model That patch reverted some code (specifically, 32001d6f) that was necessary to properly handle open() -> mmap() -> close() -> dirty pages -> munmap(), because the lower file could be closed before the dirty pages are written out. Rather than reapplying 32001d6f, this approach is a better way of ensuring that the lower file is still open in order to handle writing out the dirty pages. It is called from ecryptfs_release(), while we have a lock on the lower file pointer, just before the lower file gets the final fput() and we overwrite the pointer. https://launchpad.net/bugs/1047261 Signed-off-by: Tyler Hicks Reported-by: Artemy Tregubenko Tested-by: Artemy Tregubenko Tested-by: Colin Ian King diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c index 2768138..9b627c1 100644 --- a/fs/ecryptfs/main.c +++ b/fs/ecryptfs/main.c @@ -162,6 +162,7 @@ void ecryptfs_put_lower_file(struct inode *inode) inode_info = ecryptfs_inode_to_private(inode); if (atomic_dec_and_mutex_lock(&inode_info->lower_file_count, &inode_info->lower_file_mutex)) { + filemap_write_and_wait(inode->i_mapping); fput(inode_info->lower_file); inode_info->lower_file = NULL; mutex_unlock(&inode_info->lower_file_mutex); -- cgit v0.10.2 From 64e6651dcc10e9d2cc6230208a8e6c2cfd19ae18 Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Wed, 12 Sep 2012 18:38:00 -0700 Subject: eCryptfs: Call lower ->flush() from ecryptfs_flush() Since eCryptfs only calls fput() on the lower file in ecryptfs_release(), eCryptfs should call the lower filesystem's ->flush() from ecryptfs_flush(). If the lower filesystem implements ->flush(), then eCryptfs should try to flush out any dirty pages prior to calling the lower ->flush(). If the lower filesystem does not implement ->flush(), then eCryptfs has no need to do anything in ecryptfs_flush() since dirty pages are now written out to the lower filesystem in ecryptfs_release(). Signed-off-by: Tyler Hicks diff --git a/fs/ecryptfs/file.c b/fs/ecryptfs/file.c index 44ce5c6..d45ba45 100644 --- a/fs/ecryptfs/file.c +++ b/fs/ecryptfs/file.c @@ -275,8 +275,14 @@ out: static int ecryptfs_flush(struct file *file, fl_owner_t td) { - return file->f_mode & FMODE_WRITE - ? filemap_write_and_wait(file->f_mapping) : 0; + struct file *lower_file = ecryptfs_file_to_lower(file); + + if (lower_file->f_op && lower_file->f_op->flush) { + filemap_write_and_wait(file->f_mapping); + return lower_file->f_op->flush(lower_file, td); + } + + return 0; } static int ecryptfs_release(struct inode *inode, struct file *file) -- cgit v0.10.2 From 8335eafc2859e1a26282bef7c3d19f3d68868b8a Mon Sep 17 00:00:00 2001 From: Tyler Hicks Date: Thu, 13 Sep 2012 12:00:56 -0700 Subject: eCryptfs: Copy up attributes of the lower target inode after rename After calling into the lower filesystem to do a rename, the lower target inode's attributes were not copied up to the eCryptfs target inode. This resulted in the eCryptfs target inode staying around, rather than being evicted, because i_nlink was not updated for the eCryptfs inode. This also meant that eCryptfs didn't do the final iput() on the lower target inode so it stayed around, as well. This would result in a failure to free up space occupied by the target file in the rename() operation. Both target inodes would eventually be evicted when the eCryptfs filesystem was unmounted. This patch calls fsstack_copy_attr_all() after the lower filesystem does its ->rename() so that important inode attributes, such as i_nlink, are updated at the eCryptfs layer. ecryptfs_evict_inode() is now called and eCryptfs can drop its final reference on the lower inode. http://launchpad.net/bugs/561129 Signed-off-by: Tyler Hicks Tested-by: Colin Ian King Cc: [2.6.39+] diff --git a/fs/ecryptfs/inode.c b/fs/ecryptfs/inode.c index 534b129..cc7709e 100644 --- a/fs/ecryptfs/inode.c +++ b/fs/ecryptfs/inode.c @@ -619,6 +619,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, struct dentry *lower_old_dir_dentry; struct dentry *lower_new_dir_dentry; struct dentry *trap = NULL; + struct inode *target_inode; lower_old_dentry = ecryptfs_dentry_to_lower(old_dentry); lower_new_dentry = ecryptfs_dentry_to_lower(new_dentry); @@ -626,6 +627,7 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, dget(lower_new_dentry); lower_old_dir_dentry = dget_parent(lower_old_dentry); lower_new_dir_dentry = dget_parent(lower_new_dentry); + target_inode = new_dentry->d_inode; trap = lock_rename(lower_old_dir_dentry, lower_new_dir_dentry); /* source should not be ancestor of target */ if (trap == lower_old_dentry) { @@ -641,6 +643,9 @@ ecryptfs_rename(struct inode *old_dir, struct dentry *old_dentry, lower_new_dir_dentry->d_inode, lower_new_dentry); if (rc) goto out_lock; + if (target_inode) + fsstack_copy_attr_all(target_inode, + ecryptfs_inode_to_lower(target_inode)); fsstack_copy_attr_all(new_dir, lower_new_dir_dentry->d_inode); if (new_dir != old_dir) fsstack_copy_attr_all(old_dir, lower_old_dir_dentry->d_inode); -- cgit v0.10.2 From 985b11fa8064d55d0d5a84e68667434598911bb2 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Fri, 14 Sep 2012 16:09:09 +0800 Subject: ASoC: wm8904: correct the index Signed-off-by: Bo Shen Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/wm8904.c b/sound/soc/codecs/wm8904.c index 0013afe..dc4262e 100644 --- a/sound/soc/codecs/wm8904.c +++ b/sound/soc/codecs/wm8904.c @@ -100,7 +100,7 @@ static const struct reg_default wm8904_reg_defaults[] = { { 14, 0x0000 }, /* R14 - Power Management 2 */ { 15, 0x0000 }, /* R15 - Power Management 3 */ { 18, 0x0000 }, /* R18 - Power Management 6 */ - { 19, 0x945E }, /* R20 - Clock Rates 0 */ + { 20, 0x945E }, /* R20 - Clock Rates 0 */ { 21, 0x0C05 }, /* R21 - Clock Rates 1 */ { 22, 0x0006 }, /* R22 - Clock Rates 2 */ { 24, 0x0050 }, /* R24 - Audio Interface 0 */ -- cgit v0.10.2 From ae3bca90e94dbc9c906321b33f32de4a42a6cdf4 Mon Sep 17 00:00:00 2001 From: Parav Pandit Date: Fri, 17 Aug 2012 14:45:33 +0000 Subject: RDMA/ocrdma: Fix CQE expansion of unsignaled WQE Fix CQE expansion of unsignaled WQE -- don't expand the CQE when the WQE index of the completed CQE matches with last pending WQE (tail) in the queue. Signed-off-by: Parav Pandit Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c index cb5b7f7..b29a424 100644 --- a/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c +++ b/drivers/infiniband/hw/ocrdma/ocrdma_verbs.c @@ -2219,7 +2219,6 @@ static bool ocrdma_poll_success_scqe(struct ocrdma_qp *qp, u32 wqe_idx; if (!qp->wqe_wr_id_tbl[tail].signaled) { - expand = true; /* CQE cannot be consumed yet */ *polled = false; /* WC cannot be consumed yet */ } else { ibwc->status = IB_WC_SUCCESS; @@ -2227,10 +2226,11 @@ static bool ocrdma_poll_success_scqe(struct ocrdma_qp *qp, ibwc->qp = &qp->ibqp; ocrdma_update_wc(qp, ibwc, tail); *polled = true; - wqe_idx = le32_to_cpu(cqe->wq.wqeidx) & OCRDMA_CQE_WQEIDX_MASK; - if (tail != wqe_idx) - expand = true; /* Coalesced CQE can't be consumed yet */ } + wqe_idx = le32_to_cpu(cqe->wq.wqeidx) & OCRDMA_CQE_WQEIDX_MASK; + if (tail != wqe_idx) + expand = true; /* Coalesced CQE can't be consumed yet */ + ocrdma_hwq_inc_tail(&qp->sq); return expand; } -- cgit v0.10.2 From 4c3550057b83bde3250b2f105c7f56326fb43044 Mon Sep 17 00:00:00 2001 From: Mike Marciniszyn Date: Wed, 12 Sep 2012 13:01:29 +0000 Subject: IB/qib: Fix failure of compliance test C14-024#06_LocalPortNum Commit 3236b2d469db ("IB/qib: MADs with misset M_Keys should return failure") introduced a return code assignment that unfortunately introduced an unconditional exit for the routine due to missing braces. This patch adds the braces to correct the original patch. Reviewed-by: Dean Luick Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/qib/qib_mad.c b/drivers/infiniband/hw/qib/qib_mad.c index 19f1e6c..ccb1191 100644 --- a/drivers/infiniband/hw/qib/qib_mad.c +++ b/drivers/infiniband/hw/qib/qib_mad.c @@ -471,9 +471,10 @@ static int subn_get_portinfo(struct ib_smp *smp, struct ib_device *ibdev, if (port_num != port) { ibp = to_iport(ibdev, port_num); ret = check_mkey(ibp, smp, 0); - if (ret) + if (ret) { ret = IB_MAD_RESULT_FAILURE; goto bail; + } } } -- cgit v0.10.2 From f25b70613c048ceb1df052576fda03321ebf41cf Mon Sep 17 00:00:00 2001 From: Aaron Lu Date: Fri, 14 Sep 2012 20:54:44 +0200 Subject: ACPI / PM: Use KERN_DEBUG when no power resources are found commit a606dac368eed5696fb38e16b1394f1d049c09e9 adds support to link devices which have _PRx, if a device does not have _PRx, a warning message will be printed. This commit is for ZPODD on Intel ZPODD capable platforms, on other platforms, it has no problem if there is no power resource for this device, so a warning here is not appropriate, change it to debug. Reported-by: Borislav Petkov Signed-off-by: Aaron Lu Cc: stable@vger.kernel.org Signed-off-by: Rafael J. Wysocki diff --git a/drivers/acpi/power.c b/drivers/acpi/power.c index cc2a2dc..40e38a0 100644 --- a/drivers/acpi/power.c +++ b/drivers/acpi/power.c @@ -473,7 +473,7 @@ int acpi_power_resource_register_device(struct device *dev, acpi_handle handle) return ret; no_power_resource: - printk(KERN_WARNING PREFIX "Invalid Power Resource to register!"); + printk(KERN_DEBUG PREFIX "Invalid Power Resource to register!"); return -ENODEV; } EXPORT_SYMBOL_GPL(acpi_power_resource_register_device); -- cgit v0.10.2 From 55815f70147dcfa3ead5738fd56d3574e2e3c1c2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 14 Sep 2012 14:48:21 -0700 Subject: vfs: make O_PATH file descriptors usable for 'fstat()' MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit We already use them for openat() and friends, but fstat() also wants to be able to use O_PATH file descriptors. This should make it more directly comparable to the O_SEARCH of Solaris. Note that you could already do the same thing with "fstatat()" and an empty path, but just doing "fstat()" directly is simpler and faster, so there is no reason not to just allow it directly. See also commit 332a2e1244bd, which did the same thing for fchdir, for the same reasons. Reported-by: ольга крыжановская Cc: Al Viro Cc: stable@kernel.org # O_PATH introduced in 3.0+ Signed-off-by: Linus Torvalds diff --git a/fs/stat.c b/fs/stat.c index b6ff118..4078022 100644 --- a/fs/stat.c +++ b/fs/stat.c @@ -58,7 +58,7 @@ EXPORT_SYMBOL(vfs_getattr); int vfs_fstat(unsigned int fd, struct kstat *stat) { int fput_needed; - struct file *f = fget_light(fd, &fput_needed); + struct file *f = fget_raw_light(fd, &fput_needed); int error = -EBADF; if (f) { -- cgit v0.10.2 From f3a87f1b0c4086a408eda48e4c26e32ff80d3124 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Fri, 14 Sep 2012 20:06:30 -0400 Subject: Revert "Btrfs: fix some error codes in btrfs_qgroup_inherit()" This reverts commit 5986802c2fcc754040bb7ed95f30bb16c4a843b7. Both paths are not error paths but regular cases where non-qgroup subvols are involved. Signed-off-by: Chris Mason diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 38b42e7..b650155 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1371,10 +1371,8 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, if (srcid) { srcgroup = find_qgroup_rb(fs_info, srcid); - if (!srcgroup) { - ret = -EINVAL; + if (!srcgroup) goto unlock; - } dstgroup->rfer = srcgroup->rfer - level_size; dstgroup->rfer_cmpr = srcgroup->rfer_cmpr - level_size; srcgroup->excl = level_size; @@ -1383,10 +1381,8 @@ int btrfs_qgroup_inherit(struct btrfs_trans_handle *trans, qgroup_dirty(fs_info, srcgroup); } - if (!inherit) { - ret = -EINVAL; + if (!inherit) goto unlock; - } i_qgroups = (u64 *)(inherit + 1); for (i = 0; i < inherit->num_qgroups; ++i) { -- cgit v0.10.2 From 8ef997b67f0d779c82e7e533a792c5a6837594cd Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Tue, 11 Sep 2012 19:56:23 +0100 Subject: ARM: 7534/1: clk: Make the managed clk functions generically available The managed clk functions are currently only available when the generic clk lookup framework is build. But the managed clk functions are merely wrappers around clk_get and clk_put and do not depend on any specifics of the generic lookup functions and there are still quite a few custom implementations of the clk API. So make the managed functions available whenever the clk API is implemented. The patch also removes the custom implementation of devm_clk_get for the coldfire platform. Signed-off-by: Lars-Peter Clausen Acked-by: Greg Ungerer Signed-off-by: Russell King diff --git a/arch/m68k/platform/coldfire/clk.c b/arch/m68k/platform/coldfire/clk.c index 75f9ee9..9cd13b4 100644 --- a/arch/m68k/platform/coldfire/clk.c +++ b/arch/m68k/platform/coldfire/clk.c @@ -146,9 +146,3 @@ struct clk_ops clk_ops1 = { }; #endif /* MCFPM_PPMCR1 */ #endif /* MCFPM_PPMCR0 */ - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - return NULL; -} -EXPORT_SYMBOL(devm_clk_get); diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index 5869ea3..72ce247 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -1,4 +1,5 @@ # common clock types +obj-$(CONFIG_HAVE_CLK) += clk-devres.o obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o obj-$(CONFIG_COMMON_CLK) += clk.o clk-fixed-rate.o clk-gate.o \ clk-mux.o clk-divider.o clk-fixed-factor.o diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c new file mode 100644 index 0000000..f1e7a83 --- /dev/null +++ b/drivers/clk/clk-devres.c @@ -0,0 +1,55 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +static void devm_clk_release(struct device *dev, void *res) +{ + clk_put(*(struct clk **)res); +} + +struct clk *devm_clk_get(struct device *dev, const char *id) +{ + struct clk **ptr, *clk; + + ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + clk = clk_get(dev, id); + if (!IS_ERR(clk)) { + *ptr = clk; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return clk; +} +EXPORT_SYMBOL(devm_clk_get); + +static int devm_clk_match(struct device *dev, void *res, void *data) +{ + struct clk **c = res; + if (!c || !*c) { + WARN_ON(!c || !*c); + return 0; + } + return *c == data; +} + +void devm_clk_put(struct device *dev, struct clk *clk) +{ + int ret; + + ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); + + WARN_ON(ret); +} +EXPORT_SYMBOL(devm_clk_put); diff --git a/drivers/clk/clkdev.c b/drivers/clk/clkdev.c index d423c9b..442a313 100644 --- a/drivers/clk/clkdev.c +++ b/drivers/clk/clkdev.c @@ -171,51 +171,6 @@ void clk_put(struct clk *clk) } EXPORT_SYMBOL(clk_put); -static void devm_clk_release(struct device *dev, void *res) -{ - clk_put(*(struct clk **)res); -} - -struct clk *devm_clk_get(struct device *dev, const char *id) -{ - struct clk **ptr, *clk; - - ptr = devres_alloc(devm_clk_release, sizeof(*ptr), GFP_KERNEL); - if (!ptr) - return ERR_PTR(-ENOMEM); - - clk = clk_get(dev, id); - if (!IS_ERR(clk)) { - *ptr = clk; - devres_add(dev, ptr); - } else { - devres_free(ptr); - } - - return clk; -} -EXPORT_SYMBOL(devm_clk_get); - -static int devm_clk_match(struct device *dev, void *res, void *data) -{ - struct clk **c = res; - if (!c || !*c) { - WARN_ON(!c || !*c); - return 0; - } - return *c == data; -} - -void devm_clk_put(struct device *dev, struct clk *clk) -{ - int ret; - - ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); - - WARN_ON(ret); -} -EXPORT_SYMBOL(devm_clk_put); - void clkdev_add(struct clk_lookup *cl) { mutex_lock(&clocks_mutex); -- cgit v0.10.2 From 0848c94fb4a5cc213a7fb0fb3a5721ad6e16f096 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 11 Sep 2012 15:16:36 +0800 Subject: mfd: core: Push irqdomain mapping out into devices Currently the MFD core supports remapping MFD cell interrupts using an irqdomain but only if the MFD is being instantiated using device tree and only if the device tree bindings use the pattern of registering IPs in the device tree with compatible properties. This will be actively harmful for drivers which support non-DT platforms and use this pattern for their DT bindings as it will mean that the core will silently change remapping behaviour and it is also limiting for drivers which don't do DT with this particular pattern. There is also a potential fragility if there are interrupts not associated with MFD cells and all the cells are omitted from the device tree for some reason. Instead change the code to take an IRQ domain as an optional argument, allowing drivers to take the decision about the parent domain for their interrupts. The one current user of this feature is ab8500-core, it has the domain lookup pushed out into the driver. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/88pm800.c b/drivers/mfd/88pm800.c index b67a301..ce229ea 100644 --- a/drivers/mfd/88pm800.c +++ b/drivers/mfd/88pm800.c @@ -470,7 +470,8 @@ static int __devinit device_800_init(struct pm80x_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], - ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0); + ARRAY_SIZE(onkey_devs), &onkey_resources[0], 0, + NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; @@ -481,7 +482,7 @@ static int __devinit device_800_init(struct pm80x_chip *chip, rtc_devs[0].platform_data = pdata->rtc; rtc_devs[0].pdata_size = sizeof(struct pm80x_rtc_pdata); ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], - ARRAY_SIZE(rtc_devs), NULL, 0); + ARRAY_SIZE(rtc_devs), NULL, 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out_dev; diff --git a/drivers/mfd/88pm805.c b/drivers/mfd/88pm805.c index 6146583..c20a311 100644 --- a/drivers/mfd/88pm805.c +++ b/drivers/mfd/88pm805.c @@ -216,7 +216,8 @@ static int __devinit device_805_init(struct pm80x_chip *chip) } ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], - ARRAY_SIZE(codec_devs), &codec_resources[0], 0); + ARRAY_SIZE(codec_devs), &codec_resources[0], 0, + NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add codec subdev\n"); goto out_codec; diff --git a/drivers/mfd/88pm860x-core.c b/drivers/mfd/88pm860x-core.c index d09918c..b73f033 100644 --- a/drivers/mfd/88pm860x-core.c +++ b/drivers/mfd/88pm860x-core.c @@ -637,7 +637,7 @@ static void __devinit device_bk_init(struct pm860x_chip *chip, bk_devs[i].resources = &bk_resources[j]; ret = mfd_add_devices(chip->dev, 0, &bk_devs[i], 1, - &bk_resources[j], 0); + &bk_resources[j], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add " "backlight subdev\n"); @@ -672,7 +672,7 @@ static void __devinit device_led_init(struct pm860x_chip *chip, led_devs[i].resources = &led_resources[j], ret = mfd_add_devices(chip->dev, 0, &led_devs[i], 1, - &led_resources[j], 0); + &led_resources[j], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add " "led subdev\n"); @@ -709,7 +709,7 @@ static void __devinit device_regulator_init(struct pm860x_chip *chip, regulator_devs[i].resources = ®ulator_resources[seq]; ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[i], 1, - ®ulator_resources[seq], 0); + ®ulator_resources[seq], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add regulator subdev\n"); goto out; @@ -733,7 +733,7 @@ static void __devinit device_rtc_init(struct pm860x_chip *chip, rtc_devs[0].resources = &rtc_resources[0]; ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], ARRAY_SIZE(rtc_devs), &rtc_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add rtc subdev\n"); } @@ -752,7 +752,7 @@ static void __devinit device_touch_init(struct pm860x_chip *chip, touch_devs[0].resources = &touch_resources[0]; ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], ARRAY_SIZE(touch_devs), &touch_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add touch subdev\n"); } @@ -770,7 +770,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[0].num_resources = ARRAY_SIZE(battery_resources); power_devs[0].resources = &battery_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[0], 1, - &battery_resources[0], chip->irq_base); + &battery_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add battery subdev\n"); @@ -779,7 +779,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[1].num_resources = ARRAY_SIZE(charger_resources); power_devs[1].resources = &charger_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[1], 1, - &charger_resources[0], chip->irq_base); + &charger_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add charger subdev\n"); @@ -788,7 +788,7 @@ static void __devinit device_power_init(struct pm860x_chip *chip, power_devs[2].num_resources = ARRAY_SIZE(preg_resources); power_devs[2].resources = &preg_resources[0], ret = mfd_add_devices(chip->dev, 0, &power_devs[2], 1, - &preg_resources[0], chip->irq_base); + &preg_resources[0], chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add preg subdev\n"); } @@ -802,7 +802,7 @@ static void __devinit device_onkey_init(struct pm860x_chip *chip, onkey_devs[0].resources = &onkey_resources[0], ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), &onkey_resources[0], - chip->irq_base); + chip->irq_base, NULL); if (ret < 0) dev_err(chip->dev, "Failed to add onkey subdev\n"); } @@ -815,7 +815,8 @@ static void __devinit device_codec_init(struct pm860x_chip *chip, codec_devs[0].num_resources = ARRAY_SIZE(codec_resources); codec_devs[0].resources = &codec_resources[0], ret = mfd_add_devices(chip->dev, 0, &codec_devs[0], - ARRAY_SIZE(codec_devs), &codec_resources[0], 0); + ARRAY_SIZE(codec_devs), &codec_resources[0], 0, + NULL); if (ret < 0) dev_err(chip->dev, "Failed to add codec subdev\n"); } diff --git a/drivers/mfd/aat2870-core.c b/drivers/mfd/aat2870-core.c index 44a3fdb..f1beb49 100644 --- a/drivers/mfd/aat2870-core.c +++ b/drivers/mfd/aat2870-core.c @@ -424,7 +424,7 @@ static int aat2870_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(aat2870->dev, 0, aat2870_devs, - ARRAY_SIZE(aat2870_devs), NULL, 0); + ARRAY_SIZE(aat2870_devs), NULL, 0, NULL); if (ret != 0) { dev_err(aat2870->dev, "Failed to add subdev: %d\n", ret); goto out_disable; diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c index 78fca29..01781ae 100644 --- a/drivers/mfd/ab3100-core.c +++ b/drivers/mfd/ab3100-core.c @@ -946,7 +946,7 @@ static int __devinit ab3100_probe(struct i2c_client *client, } err = mfd_add_devices(&client->dev, 0, ab3100_devs, - ARRAY_SIZE(ab3100_devs), NULL, 0); + ARRAY_SIZE(ab3100_devs), NULL, 0, NULL); ab3100_setup_debugfs(ab3100); diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c index 626b4ec..47adf80 100644 --- a/drivers/mfd/ab8500-core.c +++ b/drivers/mfd/ab8500-core.c @@ -1418,25 +1418,25 @@ static int __devinit ab8500_probe(struct platform_device *pdev) ret = mfd_add_devices(ab8500->dev, 0, abx500_common_devs, ARRAY_SIZE(abx500_common_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; if (is_ab9540(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_devs, ARRAY_SIZE(ab9540_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); else ret = mfd_add_devices(ab8500->dev, 0, ab8500_devs, ARRAY_SIZE(ab8500_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; if (is_ab9540(ab8500) || is_ab8505(ab8500)) ret = mfd_add_devices(ab8500->dev, 0, ab9540_ab8505_devs, ARRAY_SIZE(ab9540_ab8505_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) goto out_freeirq; @@ -1444,7 +1444,7 @@ static int __devinit ab8500_probe(struct platform_device *pdev) /* Add battery management devices */ ret = mfd_add_devices(ab8500->dev, 0, ab8500_bm_devs, ARRAY_SIZE(ab8500_bm_devs), NULL, - ab8500->irq_base); + ab8500->irq_base, ab8500->domain); if (ret) dev_err(ab8500->dev, "error adding bm devices\n"); } diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index c7983e8..1b48f20 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -316,7 +316,7 @@ int __devinit arizona_dev_init(struct arizona *arizona) } ret = mfd_add_devices(arizona->dev, -1, early_devs, - ARRAY_SIZE(early_devs), NULL, 0); + ARRAY_SIZE(early_devs), NULL, 0, NULL); if (ret != 0) { dev_err(dev, "Failed to add early children: %d\n", ret); return ret; @@ -516,11 +516,11 @@ int __devinit arizona_dev_init(struct arizona *arizona) switch (arizona->type) { case WM5102: ret = mfd_add_devices(arizona->dev, -1, wm5102_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0); + ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); break; case WM5110: ret = mfd_add_devices(arizona->dev, -1, wm5110_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0); + ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); break; } diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c index 683e18a..62f0883 100644 --- a/drivers/mfd/asic3.c +++ b/drivers/mfd/asic3.c @@ -913,14 +913,14 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, if (pdata->clock_rate) { ds1wm_pdata.clock_rate = pdata->clock_rate; ret = mfd_add_devices(&pdev->dev, pdev->id, - &asic3_cell_ds1wm, 1, mem, asic->irq_base); + &asic3_cell_ds1wm, 1, mem, asic->irq_base, NULL); if (ret < 0) goto out; } if (mem_sdio && (irq >= 0)) { ret = mfd_add_devices(&pdev->dev, pdev->id, - &asic3_cell_mmc, 1, mem_sdio, irq); + &asic3_cell_mmc, 1, mem_sdio, irq, NULL); if (ret < 0) goto out; } @@ -934,7 +934,7 @@ static int __init asic3_mfd_probe(struct platform_device *pdev, asic3_cell_leds[i].pdata_size = sizeof(pdata->leds[i]); } ret = mfd_add_devices(&pdev->dev, 0, - asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0); + asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0, NULL); } out: diff --git a/drivers/mfd/cs5535-mfd.c b/drivers/mfd/cs5535-mfd.c index 3419e72..2b28213 100644 --- a/drivers/mfd/cs5535-mfd.c +++ b/drivers/mfd/cs5535-mfd.c @@ -149,7 +149,7 @@ static int __devinit cs5535_mfd_probe(struct pci_dev *pdev, } err = mfd_add_devices(&pdev->dev, -1, cs5535_mfd_cells, - ARRAY_SIZE(cs5535_mfd_cells), NULL, 0); + ARRAY_SIZE(cs5535_mfd_cells), NULL, 0, NULL); if (err) { dev_err(&pdev->dev, "MFD add devices failed: %d\n", err); goto err_disable; diff --git a/drivers/mfd/da9052-core.c b/drivers/mfd/da9052-core.c index 2544910..a0a62b2 100644 --- a/drivers/mfd/da9052-core.c +++ b/drivers/mfd/da9052-core.c @@ -803,7 +803,7 @@ int __devinit da9052_device_init(struct da9052 *da9052, u8 chip_id) dev_err(da9052->dev, "DA9052 ADC IRQ failed ret=%d\n", ret); ret = mfd_add_devices(da9052->dev, -1, da9052_subdev_info, - ARRAY_SIZE(da9052_subdev_info), NULL, 0); + ARRAY_SIZE(da9052_subdev_info), NULL, 0, NULL); if (ret) goto err; diff --git a/drivers/mfd/davinci_voicecodec.c b/drivers/mfd/davinci_voicecodec.c index 4e2af2c..45e83a6 100644 --- a/drivers/mfd/davinci_voicecodec.c +++ b/drivers/mfd/davinci_voicecodec.c @@ -129,7 +129,7 @@ static int __init davinci_vc_probe(struct platform_device *pdev) cell->pdata_size = sizeof(*davinci_vc); ret = mfd_add_devices(&pdev->dev, pdev->id, davinci_vc->cells, - DAVINCI_VC_CELLS, NULL, 0); + DAVINCI_VC_CELLS, NULL, 0, NULL); if (ret != 0) { dev_err(&pdev->dev, "fail to register client devices\n"); goto fail4; diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 7040a00..0e63cdd 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -3010,7 +3010,7 @@ static int __devinit db8500_prcmu_probe(struct platform_device *pdev) prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); err = mfd_add_devices(&pdev->dev, 0, db8500_prcmu_devs, - ARRAY_SIZE(db8500_prcmu_devs), NULL, 0); + ARRAY_SIZE(db8500_prcmu_devs), NULL, 0, NULL); if (err) { pr_err("prcmu: Failed to add subdevices\n"); return err; diff --git a/drivers/mfd/htc-pasic3.c b/drivers/mfd/htc-pasic3.c index 04c7093..9e5453d 100644 --- a/drivers/mfd/htc-pasic3.c +++ b/drivers/mfd/htc-pasic3.c @@ -168,7 +168,7 @@ static int __init pasic3_probe(struct platform_device *pdev) /* the first 5 PASIC3 registers control the DS1WM */ ds1wm_resources[0].end = (5 << asic->bus_shift) - 1; ret = mfd_add_devices(&pdev->dev, pdev->id, - &ds1wm_cell, 1, r, irq); + &ds1wm_cell, 1, r, irq, NULL); if (ret < 0) dev_warn(dev, "failed to register DS1WM\n"); } @@ -176,7 +176,8 @@ static int __init pasic3_probe(struct platform_device *pdev) if (pdata && pdata->led_pdata) { led_cell.platform_data = pdata->led_pdata; led_cell.pdata_size = sizeof(struct pasic3_leds_machinfo); - ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, 0); + ret = mfd_add_devices(&pdev->dev, pdev->id, &led_cell, 1, r, + 0, NULL); if (ret < 0) dev_warn(dev, "failed to register LED device\n"); } diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c index 59df558..266bdc5 100644 --- a/drivers/mfd/intel_msic.c +++ b/drivers/mfd/intel_msic.c @@ -344,13 +344,13 @@ static int __devinit intel_msic_init_devices(struct intel_msic *msic) continue; ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL, - pdata->irq[i]); + pdata->irq[i], NULL); if (ret) goto fail; } ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs, - ARRAY_SIZE(msic_other_devs), NULL, 0); + ARRAY_SIZE(msic_other_devs), NULL, 0, NULL); if (ret) goto fail; diff --git a/drivers/mfd/janz-cmodio.c b/drivers/mfd/janz-cmodio.c index 2ea9998..965c480 100644 --- a/drivers/mfd/janz-cmodio.c +++ b/drivers/mfd/janz-cmodio.c @@ -147,7 +147,7 @@ static int __devinit cmodio_probe_submodules(struct cmodio_device *priv) } return mfd_add_devices(&pdev->dev, 0, priv->cells, - num_probed, NULL, pdev->irq); + num_probed, NULL, pdev->irq, NULL); } /* diff --git a/drivers/mfd/jz4740-adc.c b/drivers/mfd/jz4740-adc.c index 87662a1..c6b6d7d 100644 --- a/drivers/mfd/jz4740-adc.c +++ b/drivers/mfd/jz4740-adc.c @@ -287,7 +287,8 @@ static int __devinit jz4740_adc_probe(struct platform_device *pdev) writeb(0xff, adc->base + JZ_REG_ADC_CTRL); ret = mfd_add_devices(&pdev->dev, 0, jz4740_adc_cells, - ARRAY_SIZE(jz4740_adc_cells), mem_base, irq_base); + ARRAY_SIZE(jz4740_adc_cells), mem_base, + irq_base, NULL); if (ret < 0) goto err_clk_put; diff --git a/drivers/mfd/lm3533-core.c b/drivers/mfd/lm3533-core.c index 0b2879b..24212f4 100644 --- a/drivers/mfd/lm3533-core.c +++ b/drivers/mfd/lm3533-core.c @@ -393,7 +393,8 @@ static int __devinit lm3533_device_als_init(struct lm3533 *lm3533) lm3533_als_devs[0].platform_data = pdata->als; lm3533_als_devs[0].pdata_size = sizeof(*pdata->als); - ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, 0); + ret = mfd_add_devices(lm3533->dev, 0, lm3533_als_devs, 1, NULL, + 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add ALS device\n"); return ret; @@ -422,7 +423,7 @@ static int __devinit lm3533_device_bl_init(struct lm3533 *lm3533) } ret = mfd_add_devices(lm3533->dev, 0, lm3533_bl_devs, - pdata->num_backlights, NULL, 0); + pdata->num_backlights, NULL, 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add backlight devices\n"); return ret; @@ -451,7 +452,7 @@ static int __devinit lm3533_device_led_init(struct lm3533 *lm3533) } ret = mfd_add_devices(lm3533->dev, 0, lm3533_led_devs, - pdata->num_leds, NULL, 0); + pdata->num_leds, NULL, 0, NULL); if (ret) { dev_err(lm3533->dev, "failed to add LED devices\n"); return ret; diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c index a05fdfc..092ad4b 100644 --- a/drivers/mfd/lpc_ich.c +++ b/drivers/mfd/lpc_ich.c @@ -750,7 +750,7 @@ gpe0_done: lpc_ich_finalize_cell(&lpc_ich_cells[LPC_GPIO], id); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_GPIO], - 1, NULL, 0); + 1, NULL, 0, NULL); gpio_done: if (acpi_conflict) @@ -807,7 +807,7 @@ static int __devinit lpc_ich_init_wdt(struct pci_dev *dev, lpc_ich_finalize_cell(&lpc_ich_cells[LPC_WDT], id); ret = mfd_add_devices(&dev->dev, -1, &lpc_ich_cells[LPC_WDT], - 1, NULL, 0); + 1, NULL, 0, NULL); wdt_done: return ret; diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c index 9f20abc..f6b9c5c 100644 --- a/drivers/mfd/lpc_sch.c +++ b/drivers/mfd/lpc_sch.c @@ -127,7 +127,8 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, lpc_sch_cells[i].id = id->device; ret = mfd_add_devices(&dev->dev, 0, - lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, 0); + lpc_sch_cells, ARRAY_SIZE(lpc_sch_cells), NULL, + 0, NULL); if (ret) goto out_dev; @@ -153,7 +154,8 @@ static int __devinit lpc_sch_probe(struct pci_dev *dev, tunnelcreek_cells[i].id = id->device; ret = mfd_add_devices(&dev->dev, 0, tunnelcreek_cells, - ARRAY_SIZE(tunnelcreek_cells), NULL, 0); + ARRAY_SIZE(tunnelcreek_cells), NULL, + 0, NULL); } return ret; diff --git a/drivers/mfd/max77686.c b/drivers/mfd/max77686.c index c03e12b..d9e24c8 100644 --- a/drivers/mfd/max77686.c +++ b/drivers/mfd/max77686.c @@ -126,7 +126,7 @@ static int max77686_i2c_probe(struct i2c_client *i2c, max77686_irq_init(max77686); ret = mfd_add_devices(max77686->dev, -1, max77686_devs, - ARRAY_SIZE(max77686_devs), NULL, 0); + ARRAY_SIZE(max77686_devs), NULL, 0, NULL); if (ret < 0) goto err_mfd; diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index a1811cb..4fdd03d 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -159,7 +159,7 @@ static int max77693_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(max77693->dev); ret = mfd_add_devices(max77693->dev, -1, max77693_devs, - ARRAY_SIZE(max77693_devs), NULL, 0); + ARRAY_SIZE(max77693_devs), NULL, 0, NULL); if (ret < 0) goto err_mfd; diff --git a/drivers/mfd/max8925-core.c b/drivers/mfd/max8925-core.c index 825a7f0..ee53757 100644 --- a/drivers/mfd/max8925-core.c +++ b/drivers/mfd/max8925-core.c @@ -598,7 +598,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &rtc_devs[0], ARRAY_SIZE(rtc_devs), - &rtc_resources[0], chip->irq_base); + &rtc_resources[0], chip->irq_base, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add rtc subdev\n"); goto out; @@ -606,7 +606,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, ret = mfd_add_devices(chip->dev, 0, &onkey_devs[0], ARRAY_SIZE(onkey_devs), - &onkey_resources[0], 0); + &onkey_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add onkey subdev\n"); goto out_dev; @@ -615,7 +615,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata) { ret = mfd_add_devices(chip->dev, 0, ®ulator_devs[0], ARRAY_SIZE(regulator_devs), - ®ulator_resources[0], 0); + ®ulator_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add regulator subdev\n"); goto out_dev; @@ -625,7 +625,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->backlight) { ret = mfd_add_devices(chip->dev, 0, &backlight_devs[0], ARRAY_SIZE(backlight_devs), - &backlight_resources[0], 0); + &backlight_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add backlight subdev\n"); goto out_dev; @@ -635,7 +635,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->power) { ret = mfd_add_devices(chip->dev, 0, &power_devs[0], ARRAY_SIZE(power_devs), - &power_supply_resources[0], 0); + &power_supply_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add power supply " "subdev\n"); @@ -646,7 +646,7 @@ int __devinit max8925_device_init(struct max8925_chip *chip, if (pdata && pdata->touch) { ret = mfd_add_devices(chip->dev, 0, &touch_devs[0], ARRAY_SIZE(touch_devs), - &touch_resources[0], 0); + &touch_resources[0], 0, NULL); if (ret < 0) { dev_err(chip->dev, "Failed to add touch subdev\n"); goto out_dev; diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 10b629c..f1235170 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -160,7 +160,7 @@ static int max8997_i2c_probe(struct i2c_client *i2c, mfd_add_devices(max8997->dev, -1, max8997_devs, ARRAY_SIZE(max8997_devs), - NULL, 0); + NULL, 0, NULL); /* * TODO: enable others (flash, muic, rtc, battery, ...) and diff --git a/drivers/mfd/max8998.c b/drivers/mfd/max8998.c index 6ef56d2..d7218cc 100644 --- a/drivers/mfd/max8998.c +++ b/drivers/mfd/max8998.c @@ -161,13 +161,13 @@ static int max8998_i2c_probe(struct i2c_client *i2c, switch (id->driver_data) { case TYPE_LP3974: ret = mfd_add_devices(max8998->dev, -1, - lp3974_devs, ARRAY_SIZE(lp3974_devs), - NULL, 0); + lp3974_devs, ARRAY_SIZE(lp3974_devs), + NULL, 0, NULL); break; case TYPE_MAX8998: ret = mfd_add_devices(max8998->dev, -1, - max8998_devs, ARRAY_SIZE(max8998_devs), - NULL, 0); + max8998_devs, ARRAY_SIZE(max8998_devs), + NULL, 0, NULL); break; default: ret = -EINVAL; diff --git a/drivers/mfd/mc13xxx-core.c b/drivers/mfd/mc13xxx-core.c index b801dc7..1ec79b5 100644 --- a/drivers/mfd/mc13xxx-core.c +++ b/drivers/mfd/mc13xxx-core.c @@ -612,7 +612,7 @@ static int mc13xxx_add_subdevice_pdata(struct mc13xxx *mc13xxx, if (!cell.name) return -ENOMEM; - return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0); + return mfd_add_devices(mc13xxx->dev, -1, &cell, 1, NULL, 0, NULL); } static int mc13xxx_add_subdevice(struct mc13xxx *mc13xxx, const char *format) diff --git a/drivers/mfd/mfd-core.c b/drivers/mfd/mfd-core.c index 0c3a01c..f8b7771 100644 --- a/drivers/mfd/mfd-core.c +++ b/drivers/mfd/mfd-core.c @@ -74,12 +74,11 @@ static int mfd_platform_add_cell(struct platform_device *pdev, static int mfd_add_device(struct device *parent, int id, const struct mfd_cell *cell, struct resource *mem_base, - int irq_base) + int irq_base, struct irq_domain *domain) { struct resource *res; struct platform_device *pdev; struct device_node *np = NULL; - struct irq_domain *domain = NULL; int ret = -ENOMEM; int r; @@ -97,7 +96,6 @@ static int mfd_add_device(struct device *parent, int id, for_each_child_of_node(parent->of_node, np) { if (of_device_is_compatible(np, cell->of_compatible)) { pdev->dev.of_node = np; - domain = irq_find_host(parent->of_node); break; } } @@ -177,7 +175,7 @@ fail_alloc: int mfd_add_devices(struct device *parent, int id, struct mfd_cell *cells, int n_devs, struct resource *mem_base, - int irq_base) + int irq_base, struct irq_domain *domain) { int i; int ret = 0; @@ -191,7 +189,8 @@ int mfd_add_devices(struct device *parent, int id, for (i = 0; i < n_devs; i++) { atomic_set(&cnts[i], 0); cells[i].usage_count = &cnts[i]; - ret = mfd_add_device(parent, id, cells + i, mem_base, irq_base); + ret = mfd_add_device(parent, id, cells + i, mem_base, + irq_base, domain); if (ret) break; } @@ -247,7 +246,8 @@ int mfd_clone_cell(const char *cell, const char **clones, size_t n_clones) for (i = 0; i < n_clones; i++) { cell_entry.name = clones[i]; /* don't give up if a single call fails; just report error */ - if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0)) + if (mfd_add_device(pdev->dev.parent, -1, &cell_entry, NULL, 0, + NULL)) dev_err(dev, "failed to create platform device '%s'\n", clones[i]); } diff --git a/drivers/mfd/palmas.c b/drivers/mfd/palmas.c index c4a69f1..a345f9bb 100644 --- a/drivers/mfd/palmas.c +++ b/drivers/mfd/palmas.c @@ -453,7 +453,8 @@ static int __devinit palmas_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(palmas->dev, -1, children, ARRAY_SIZE(palmas_children), - NULL, regmap_irq_chip_get_base(palmas->irq_data)); + NULL, regmap_irq_chip_get_base(palmas->irq_data), + NULL); kfree(children); if (ret < 0) diff --git a/drivers/mfd/rc5t583.c b/drivers/mfd/rc5t583.c index cdc1df7..3a8fa88 100644 --- a/drivers/mfd/rc5t583.c +++ b/drivers/mfd/rc5t583.c @@ -289,7 +289,7 @@ static int __devinit rc5t583_i2c_probe(struct i2c_client *i2c, } ret = mfd_add_devices(rc5t583->dev, -1, rc5t583_subdevs, - ARRAY_SIZE(rc5t583_subdevs), NULL, 0); + ARRAY_SIZE(rc5t583_subdevs), NULL, 0, NULL); if (ret) { dev_err(&i2c->dev, "add mfd devices failed: %d\n", ret); goto err_add_devs; diff --git a/drivers/mfd/rdc321x-southbridge.c b/drivers/mfd/rdc321x-southbridge.c index 685d61e..0f70dce 100644 --- a/drivers/mfd/rdc321x-southbridge.c +++ b/drivers/mfd/rdc321x-southbridge.c @@ -87,7 +87,8 @@ static int __devinit rdc321x_sb_probe(struct pci_dev *pdev, rdc321x_wdt_pdata.sb_pdev = pdev; return mfd_add_devices(&pdev->dev, -1, - rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), NULL, 0); + rdc321x_sb_cells, ARRAY_SIZE(rdc321x_sb_cells), + NULL, 0, NULL); } static void __devexit rdc321x_sb_remove(struct pci_dev *pdev) diff --git a/drivers/mfd/sec-core.c b/drivers/mfd/sec-core.c index 2988efd..49d361a 100644 --- a/drivers/mfd/sec-core.c +++ b/drivers/mfd/sec-core.c @@ -141,19 +141,19 @@ static int sec_pmic_probe(struct i2c_client *i2c, switch (sec_pmic->device_type) { case S5M8751X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8751_devs, - ARRAY_SIZE(s5m8751_devs), NULL, 0); + ARRAY_SIZE(s5m8751_devs), NULL, 0, NULL); break; case S5M8763X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8763_devs, - ARRAY_SIZE(s5m8763_devs), NULL, 0); + ARRAY_SIZE(s5m8763_devs), NULL, 0, NULL); break; case S5M8767X: ret = mfd_add_devices(sec_pmic->dev, -1, s5m8767_devs, - ARRAY_SIZE(s5m8767_devs), NULL, 0); + ARRAY_SIZE(s5m8767_devs), NULL, 0, NULL); break; case S2MPS11X: ret = mfd_add_devices(sec_pmic->dev, -1, s2mps11_devs, - ARRAY_SIZE(s2mps11_devs), NULL, 0); + ARRAY_SIZE(s2mps11_devs), NULL, 0, NULL); break; default: /* If this happens the probe function is problem */ diff --git a/drivers/mfd/sta2x11-mfd.c b/drivers/mfd/sta2x11-mfd.c index d31fed0..d35da68 100644 --- a/drivers/mfd/sta2x11-mfd.c +++ b/drivers/mfd/sta2x11-mfd.c @@ -407,7 +407,7 @@ static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev, sta2x11_mfd_bar0, ARRAY_SIZE(sta2x11_mfd_bar0), &pdev->resource[0], - 0); + 0, NULL); if (err) { dev_err(&pdev->dev, "mfd_add_devices[0] failed: %d\n", err); goto err_disable; @@ -417,7 +417,7 @@ static int __devinit sta2x11_mfd_probe(struct pci_dev *pdev, sta2x11_mfd_bar1, ARRAY_SIZE(sta2x11_mfd_bar1), &pdev->resource[1], - 0); + 0, NULL); if (err) { dev_err(&pdev->dev, "mfd_add_devices[1] failed: %d\n", err); goto err_disable; diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c index 2dd8d49..c94f521 100644 --- a/drivers/mfd/stmpe.c +++ b/drivers/mfd/stmpe.c @@ -962,7 +962,7 @@ static int __devinit stmpe_add_device(struct stmpe *stmpe, struct mfd_cell *cell, int irq) { return mfd_add_devices(stmpe->dev, stmpe->pdata->id, cell, 1, - NULL, stmpe->irq_base + irq); + NULL, stmpe->irq_base + irq, NULL); } static int __devinit stmpe_devices_init(struct stmpe *stmpe) diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c index 2d9e879..b32940e 100644 --- a/drivers/mfd/t7l66xb.c +++ b/drivers/mfd/t7l66xb.c @@ -388,7 +388,7 @@ static int t7l66xb_probe(struct platform_device *dev) ret = mfd_add_devices(&dev->dev, dev->id, t7l66xb_cells, ARRAY_SIZE(t7l66xb_cells), - iomem, t7l66xb->irq_base); + iomem, t7l66xb->irq_base, NULL); if (!ret) return 0; diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c index 048bf05..b56ba6b 100644 --- a/drivers/mfd/tc3589x.c +++ b/drivers/mfd/tc3589x.c @@ -262,8 +262,8 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_GPIO) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio, - ARRAY_SIZE(tc3589x_dev_gpio), NULL, - tc3589x->irq_base); + ARRAY_SIZE(tc3589x_dev_gpio), NULL, + tc3589x->irq_base, NULL); if (ret) { dev_err(tc3589x->dev, "failed to add gpio child\n"); return ret; @@ -273,8 +273,8 @@ static int __devinit tc3589x_device_init(struct tc3589x *tc3589x) if (blocks & TC3589x_BLOCK_KEYPAD) { ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad, - ARRAY_SIZE(tc3589x_dev_keypad), NULL, - tc3589x->irq_base); + ARRAY_SIZE(tc3589x_dev_keypad), NULL, + tc3589x->irq_base, NULL); if (ret) { dev_err(tc3589x->dev, "failed to keypad child\n"); return ret; diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c index d20a284..413c891 100644 --- a/drivers/mfd/tc6387xb.c +++ b/drivers/mfd/tc6387xb.c @@ -192,7 +192,7 @@ static int __devinit tc6387xb_probe(struct platform_device *dev) printk(KERN_INFO "Toshiba tc6387xb initialised\n"); ret = mfd_add_devices(&dev->dev, dev->id, tc6387xb_cells, - ARRAY_SIZE(tc6387xb_cells), iomem, irq); + ARRAY_SIZE(tc6387xb_cells), iomem, irq, NULL); if (!ret) return 0; diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c index 9612264..dcab026 100644 --- a/drivers/mfd/tc6393xb.c +++ b/drivers/mfd/tc6393xb.c @@ -700,8 +700,8 @@ static int __devinit tc6393xb_probe(struct platform_device *dev) tc6393xb_cells[TC6393XB_CELL_FB].pdata_size = sizeof(*tcpd->fb_data); ret = mfd_add_devices(&dev->dev, dev->id, - tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), - iomem, tcpd->irq_base); + tc6393xb_cells, ARRAY_SIZE(tc6393xb_cells), + iomem, tcpd->irq_base, NULL); if (!ret) return 0; diff --git a/drivers/mfd/ti-ssp.c b/drivers/mfd/ti-ssp.c index 4fb0e6c..7c3675a 100644 --- a/drivers/mfd/ti-ssp.c +++ b/drivers/mfd/ti-ssp.c @@ -412,7 +412,7 @@ static int __devinit ti_ssp_probe(struct platform_device *pdev) cells[id].data_size = data->pdata_size; } - error = mfd_add_devices(dev, 0, cells, 2, NULL, 0); + error = mfd_add_devices(dev, 0, cells, 2, NULL, 0, NULL); if (error < 0) { dev_err(dev, "cannot add mfd cells\n"); goto error_enable; diff --git a/drivers/mfd/timberdale.c b/drivers/mfd/timberdale.c index a447f4e..cccc626 100644 --- a/drivers/mfd/timberdale.c +++ b/drivers/mfd/timberdale.c @@ -757,25 +757,25 @@ static int __devinit timb_probe(struct pci_dev *dev, err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg0, ARRAY_SIZE(timberdale_cells_bar0_cfg0), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER1: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg1, ARRAY_SIZE(timberdale_cells_bar0_cfg1), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER2: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg2, ARRAY_SIZE(timberdale_cells_bar0_cfg2), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; case TIMB_HW_VER3: err = mfd_add_devices(&dev->dev, -1, timberdale_cells_bar0_cfg3, ARRAY_SIZE(timberdale_cells_bar0_cfg3), - &dev->resource[0], msix_entries[0].vector); + &dev->resource[0], msix_entries[0].vector, NULL); break; default: dev_err(&dev->dev, "Uknown IP setup: %d.%d.%d\n", @@ -792,7 +792,7 @@ static int __devinit timb_probe(struct pci_dev *dev, err = mfd_add_devices(&dev->dev, 0, timberdale_cells_bar1, ARRAY_SIZE(timberdale_cells_bar1), - &dev->resource[1], msix_entries[0].vector); + &dev->resource[1], msix_entries[0].vector, NULL); if (err) { dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err); goto err_mfd2; @@ -803,7 +803,7 @@ static int __devinit timb_probe(struct pci_dev *dev, ((priv->fw.config & TIMB_HW_VER_MASK) == TIMB_HW_VER3)) { err = mfd_add_devices(&dev->dev, 1, timberdale_cells_bar2, ARRAY_SIZE(timberdale_cells_bar2), - &dev->resource[2], msix_entries[0].vector); + &dev->resource[2], msix_entries[0].vector, NULL); if (err) { dev_err(&dev->dev, "mfd_add_devices failed: %d\n", err); goto err_mfd2; diff --git a/drivers/mfd/tps6105x.c b/drivers/mfd/tps6105x.c index a293b97..14051bd 100644 --- a/drivers/mfd/tps6105x.c +++ b/drivers/mfd/tps6105x.c @@ -188,7 +188,7 @@ static int __devinit tps6105x_probe(struct i2c_client *client, } ret = mfd_add_devices(&client->dev, 0, tps6105x_cells, - ARRAY_SIZE(tps6105x_cells), NULL, 0); + ARRAY_SIZE(tps6105x_cells), NULL, 0, NULL); if (ret) goto fail; diff --git a/drivers/mfd/tps6507x.c b/drivers/mfd/tps6507x.c index 33ba772..1b20349 100644 --- a/drivers/mfd/tps6507x.c +++ b/drivers/mfd/tps6507x.c @@ -100,7 +100,7 @@ static int tps6507x_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(tps6507x->dev, -1, tps6507x_devs, ARRAY_SIZE(tps6507x_devs), - NULL, 0); + NULL, 0, NULL); if (ret < 0) goto err; diff --git a/drivers/mfd/tps65090.c b/drivers/mfd/tps65090.c index 80e24f4..50fd87c 100644 --- a/drivers/mfd/tps65090.c +++ b/drivers/mfd/tps65090.c @@ -292,7 +292,7 @@ static int __devinit tps65090_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps65090->dev, -1, tps65090s, - ARRAY_SIZE(tps65090s), NULL, 0); + ARRAY_SIZE(tps65090s), NULL, 0, NULL); if (ret) { dev_err(&client->dev, "add mfd devices failed with err: %d\n", ret); diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c index 3bc2744..a95e942 100644 --- a/drivers/mfd/tps65217.c +++ b/drivers/mfd/tps65217.c @@ -191,7 +191,7 @@ static int __devinit tps65217_probe(struct i2c_client *client, } ret = mfd_add_devices(tps->dev, -1, tps65217s, - ARRAY_SIZE(tps65217s), NULL, 0); + ARRAY_SIZE(tps65217s), NULL, 0, NULL); if (ret < 0) { dev_err(tps->dev, "mfd_add_devices failed: %d\n", ret); return ret; diff --git a/drivers/mfd/tps6586x.c b/drivers/mfd/tps6586x.c index 353c348..5f58370 100644 --- a/drivers/mfd/tps6586x.c +++ b/drivers/mfd/tps6586x.c @@ -493,7 +493,8 @@ static int __devinit tps6586x_i2c_probe(struct i2c_client *client, } ret = mfd_add_devices(tps6586x->dev, -1, - tps6586x_cell, ARRAY_SIZE(tps6586x_cell), NULL, 0); + tps6586x_cell, ARRAY_SIZE(tps6586x_cell), + NULL, 0, NULL); if (ret < 0) { dev_err(&client->dev, "mfd_add_devices failed: %d\n", ret); goto err_mfd_add; diff --git a/drivers/mfd/tps65910.c b/drivers/mfd/tps65910.c index 1c56379..d3ce4d5 100644 --- a/drivers/mfd/tps65910.c +++ b/drivers/mfd/tps65910.c @@ -254,7 +254,7 @@ static __devinit int tps65910_i2c_probe(struct i2c_client *i2c, ret = mfd_add_devices(tps65910->dev, -1, tps65910s, ARRAY_SIZE(tps65910s), - NULL, 0); + NULL, 0, NULL); if (ret < 0) { dev_err(&i2c->dev, "mfd_add_devices failed: %d\n", ret); return ret; diff --git a/drivers/mfd/tps65912-core.c b/drivers/mfd/tps65912-core.c index 74fd8cb..4658b5b 100644 --- a/drivers/mfd/tps65912-core.c +++ b/drivers/mfd/tps65912-core.c @@ -146,7 +146,7 @@ int tps65912_device_init(struct tps65912 *tps65912) ret = mfd_add_devices(tps65912->dev, -1, tps65912s, ARRAY_SIZE(tps65912s), - NULL, 0); + NULL, 0, NULL); if (ret < 0) goto err; diff --git a/drivers/mfd/twl4030-audio.c b/drivers/mfd/twl4030-audio.c index 838ce4e..77c9acb 100644 --- a/drivers/mfd/twl4030-audio.c +++ b/drivers/mfd/twl4030-audio.c @@ -223,7 +223,7 @@ static int __devinit twl4030_audio_probe(struct platform_device *pdev) if (childs) ret = mfd_add_devices(&pdev->dev, pdev->id, audio->cells, - childs, NULL, 0); + childs, NULL, 0, NULL); else { dev_err(&pdev->dev, "No platform data found for childs\n"); ret = -ENODEV; diff --git a/drivers/mfd/twl6040-core.c b/drivers/mfd/twl6040-core.c index b0fad0f..3dca5c1 100644 --- a/drivers/mfd/twl6040-core.c +++ b/drivers/mfd/twl6040-core.c @@ -632,7 +632,7 @@ static int __devinit twl6040_probe(struct i2c_client *client, } ret = mfd_add_devices(&client->dev, -1, twl6040->cells, children, - NULL, 0); + NULL, 0, NULL); if (ret) goto mfd_err; diff --git a/drivers/mfd/vx855.c b/drivers/mfd/vx855.c index 872aff2..b9a636d 100644 --- a/drivers/mfd/vx855.c +++ b/drivers/mfd/vx855.c @@ -102,7 +102,7 @@ static __devinit int vx855_probe(struct pci_dev *pdev, vx855_gpio_resources[1].end = vx855_gpio_resources[1].start + 3; ret = mfd_add_devices(&pdev->dev, -1, vx855_cells, ARRAY_SIZE(vx855_cells), - NULL, 0); + NULL, 0, NULL); /* we always return -ENODEV here in order to enable other * drivers like old, not-yet-platform_device ported i2c-viapro */ diff --git a/drivers/mfd/wl1273-core.c b/drivers/mfd/wl1273-core.c index f39b756..86e0e43 100644 --- a/drivers/mfd/wl1273-core.c +++ b/drivers/mfd/wl1273-core.c @@ -241,7 +241,7 @@ static int __devinit wl1273_core_probe(struct i2c_client *client, __func__, children); r = mfd_add_devices(&client->dev, -1, core->cells, - children, NULL, 0); + children, NULL, 0, NULL); if (r) goto err; diff --git a/drivers/mfd/wm831x-core.c b/drivers/mfd/wm831x-core.c index 946698f..3017310 100644 --- a/drivers/mfd/wm831x-core.c +++ b/drivers/mfd/wm831x-core.c @@ -1813,27 +1813,27 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8310: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8310_devs, ARRAY_SIZE(wm8310_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8311: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8311_devs, ARRAY_SIZE(wm8311_devs), - NULL, 0); + NULL, 0, NULL); if (!pdata || !pdata->disable_touch) mfd_add_devices(wm831x->dev, wm831x_num, touch_devs, ARRAY_SIZE(touch_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8312: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8312_devs, ARRAY_SIZE(wm8312_devs), - NULL, 0); + NULL, 0, NULL); if (!pdata || !pdata->disable_touch) mfd_add_devices(wm831x->dev, wm831x_num, touch_devs, ARRAY_SIZE(touch_devs), - NULL, 0); + NULL, 0, NULL); break; case WM8320: @@ -1842,7 +1842,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) case WM8326: ret = mfd_add_devices(wm831x->dev, wm831x_num, wm8320_devs, ARRAY_SIZE(wm8320_devs), - NULL, 0); + NULL, 0, NULL); break; default: @@ -1867,7 +1867,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) if (ret & WM831X_XTAL_ENA) { ret = mfd_add_devices(wm831x->dev, wm831x_num, rtc_devs, ARRAY_SIZE(rtc_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm831x->dev, "Failed to add RTC: %d\n", ret); goto err_irq; @@ -1880,7 +1880,7 @@ int wm831x_device_init(struct wm831x *wm831x, unsigned long id, int irq) /* Treat errors as non-critical */ ret = mfd_add_devices(wm831x->dev, wm831x_num, backlight_devs, ARRAY_SIZE(backlight_devs), NULL, - 0); + 0, NULL); if (ret < 0) dev_err(wm831x->dev, "Failed to add backlight: %d\n", ret); diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c index 4b7d378..639ca35 100644 --- a/drivers/mfd/wm8400-core.c +++ b/drivers/mfd/wm8400-core.c @@ -70,7 +70,7 @@ static int wm8400_register_codec(struct wm8400 *wm8400) .pdata_size = sizeof(*wm8400), }; - return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0); + return mfd_add_devices(wm8400->dev, -1, &cell, 1, NULL, 0, NULL); } /* diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c index eec74aa..2febf88 100644 --- a/drivers/mfd/wm8994-core.c +++ b/drivers/mfd/wm8994-core.c @@ -414,7 +414,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) ret = mfd_add_devices(wm8994->dev, -1, wm8994_regulator_devs, ARRAY_SIZE(wm8994_regulator_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err; @@ -648,7 +648,7 @@ static __devinit int wm8994_device_init(struct wm8994 *wm8994, int irq) ret = mfd_add_devices(wm8994->dev, -1, wm8994_devs, ARRAY_SIZE(wm8994_devs), - NULL, 0); + NULL, 0, NULL); if (ret != 0) { dev_err(wm8994->dev, "Failed to add children: %d\n", ret); goto err_irq; diff --git a/drivers/staging/nvec/nvec.c b/drivers/staging/nvec/nvec.c index 695ea35..d0a7e40 100644 --- a/drivers/staging/nvec/nvec.c +++ b/drivers/staging/nvec/nvec.c @@ -837,7 +837,7 @@ static int __devinit tegra_nvec_probe(struct platform_device *pdev) } ret = mfd_add_devices(nvec->dev, -1, nvec_devices, - ARRAY_SIZE(nvec_devices), base, 0); + ARRAY_SIZE(nvec_devices), base, 0, NULL); if (ret) dev_err(nvec->dev, "error adding subdevices\n"); diff --git a/include/linux/mfd/core.h b/include/linux/mfd/core.h index 3a8435a..cebe97e 100644 --- a/include/linux/mfd/core.h +++ b/include/linux/mfd/core.h @@ -16,6 +16,8 @@ #include +struct irq_domain; + /* * This struct describes the MFD part ("cell"). * After registration the copy of this structure will become the platform data @@ -98,7 +100,7 @@ static inline const struct mfd_cell *mfd_get_cell(struct platform_device *pdev) extern int mfd_add_devices(struct device *parent, int id, struct mfd_cell *cells, int n_devs, struct resource *mem_base, - int irq_base); + int irq_base, struct irq_domain *irq_domain); extern void mfd_remove_devices(struct device *parent); -- cgit v0.10.2 From d51f42d2c5b7e11b47876b8b5c53f0ac317fef24 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 21 Aug 2012 15:15:52 +0900 Subject: mfd: MAX77693: Fix interrupt handling bug This patch fix bug related to interrupt handling for MAX77693 devices. - Unmask interrupt masking bit for charger/flash/muic to revolve that interrupt isn't happened when external connector is attached. - Fix wrong regmap instance when muic interrupt is happened. This patch were discussed and confirm discussion about this patch on below url: http://lkml.org/lkml/2012/7/16/118 Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Acked-by: Greg Kroah-Hartman Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/max77693-irq.c b/drivers/mfd/max77693-irq.c index 2b40356..1029d01 100644 --- a/drivers/mfd/max77693-irq.c +++ b/drivers/mfd/max77693-irq.c @@ -137,6 +137,9 @@ static void max77693_irq_mask(struct irq_data *data) const struct max77693_irq_data *irq_data = irq_to_max77693_irq(max77693, data->irq); + if (irq_data->group >= MAX77693_IRQ_GROUP_NR) + return; + if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) max77693->irq_masks_cur[irq_data->group] &= ~irq_data->mask; else @@ -149,6 +152,9 @@ static void max77693_irq_unmask(struct irq_data *data) const struct max77693_irq_data *irq_data = irq_to_max77693_irq(max77693, data->irq); + if (irq_data->group >= MAX77693_IRQ_GROUP_NR) + return; + if (irq_data->group >= MUIC_INT1 && irq_data->group <= MUIC_INT3) max77693->irq_masks_cur[irq_data->group] |= irq_data->mask; else @@ -200,7 +206,7 @@ static irqreturn_t max77693_irq_thread(int irq, void *data) if (irq_src & MAX77693_IRQSRC_MUIC) /* MUIC INT1 ~ INT3 */ - max77693_bulk_read(max77693->regmap, MAX77693_MUIC_REG_INT1, + max77693_bulk_read(max77693->regmap_muic, MAX77693_MUIC_REG_INT1, MAX77693_NUM_IRQ_MUIC_REGS, &irq_reg[MUIC_INT1]); /* Apply masking */ @@ -255,7 +261,8 @@ int max77693_irq_init(struct max77693_dev *max77693) { struct irq_domain *domain; int i; - int ret; + int ret = 0; + u8 intsrc_mask; mutex_init(&max77693->irqlock); @@ -287,19 +294,38 @@ int max77693_irq_init(struct max77693_dev *max77693) &max77693_irq_domain_ops, max77693); if (!domain) { dev_err(max77693->dev, "could not create irq domain\n"); - return -ENODEV; + ret = -ENODEV; + goto err_irq; } max77693->irq_domain = domain; + /* Unmask max77693 interrupt */ + ret = max77693_read_reg(max77693->regmap, + MAX77693_PMIC_REG_INTSRC_MASK, &intsrc_mask); + if (ret < 0) { + dev_err(max77693->dev, "fail to read PMIC register\n"); + goto err_irq; + } + + intsrc_mask &= ~(MAX77693_IRQSRC_CHG); + intsrc_mask &= ~(MAX77693_IRQSRC_FLASH); + intsrc_mask &= ~(MAX77693_IRQSRC_MUIC); + ret = max77693_write_reg(max77693->regmap, + MAX77693_PMIC_REG_INTSRC_MASK, intsrc_mask); + if (ret < 0) { + dev_err(max77693->dev, "fail to write PMIC register\n"); + goto err_irq; + } + ret = request_threaded_irq(max77693->irq, NULL, max77693_irq_thread, IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "max77693-irq", max77693); - if (ret) dev_err(max77693->dev, "Failed to request IRQ %d: %d\n", max77693->irq, ret); - return 0; +err_irq: + return ret; } void max77693_irq_exit(struct max77693_dev *max77693) -- cgit v0.10.2 From b186b12487efc80c44f2f0d26cc26eb249cf1524 Mon Sep 17 00:00:00 2001 From: Chanwoo Choi Date: Tue, 21 Aug 2012 15:16:23 +0900 Subject: mfd: MAX77693: Fix NULL pointer error when initializing irqs This patch initialize register map of MUIC device because mfd driver of Maxim MAX77693 use regmap-muic instance of MUIC device when irqs of Maxim MAX77693 is initialized before call max77693-muic probe() function. Signed-off-by: Chanwoo Choi Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park Reported-by: Sylwester Nawrocki Acked-by: Greg Kroah-Hartman Signed-off-by: Samuel Ortiz diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 920a609..38f9e52 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -669,13 +669,18 @@ static int __devinit max77693_muic_probe(struct platform_device *pdev) } info->dev = &pdev->dev; info->max77693 = max77693; - info->max77693->regmap_muic = regmap_init_i2c(info->max77693->muic, - &max77693_muic_regmap_config); - if (IS_ERR(info->max77693->regmap_muic)) { - ret = PTR_ERR(info->max77693->regmap_muic); - dev_err(max77693->dev, - "failed to allocate register map: %d\n", ret); - goto err_regmap; + if (info->max77693->regmap_muic) + dev_dbg(&pdev->dev, "allocate register map\n"); + else { + info->max77693->regmap_muic = devm_regmap_init_i2c( + info->max77693->muic, + &max77693_muic_regmap_config); + if (IS_ERR(info->max77693->regmap_muic)) { + ret = PTR_ERR(info->max77693->regmap_muic); + dev_err(max77693->dev, + "failed to allocate register map: %d\n", ret); + goto err_regmap; + } } platform_set_drvdata(pdev, info); mutex_init(&info->mutex); diff --git a/drivers/mfd/max77693.c b/drivers/mfd/max77693.c index 4fdd03d..cc5155e 100644 --- a/drivers/mfd/max77693.c +++ b/drivers/mfd/max77693.c @@ -152,6 +152,20 @@ static int max77693_i2c_probe(struct i2c_client *i2c, max77693->haptic = i2c_new_dummy(i2c->adapter, I2C_ADDR_HAPTIC); i2c_set_clientdata(max77693->haptic, max77693); + /* + * Initialize register map for MUIC device because use regmap-muic + * instance of MUIC device when irq of max77693 is initialized + * before call max77693-muic probe() function. + */ + max77693->regmap_muic = devm_regmap_init_i2c(max77693->muic, + &max77693_regmap_config); + if (IS_ERR(max77693->regmap_muic)) { + ret = PTR_ERR(max77693->regmap_muic); + dev_err(max77693->dev, + "failed to allocate register map: %d\n", ret); + goto err_regmap; + } + ret = max77693_irq_init(max77693); if (ret < 0) goto err_irq; -- cgit v0.10.2 From e1e5b7e4251c7538ca08c2c5545b0c2fbd8a6635 Mon Sep 17 00:00:00 2001 From: Matthew Leach Date: Tue, 11 Sep 2012 17:56:57 +0100 Subject: ARM: 7532/1: decompressor: reset SCTLR.TRE for VMSA ARMv7 cores This patch zeroes the SCTLR.TRE bit prior to setting the mapping as cacheable for ARMv7 cores in the decompressor, ensuring that the memory region attributes are obtained from the C and B bits, not from the page tables. Cc: Nicolas Pitre Reviewed-by: Will Deacon Signed-off-by: Matthew Leach Signed-off-by: Will Deacon Cc: Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 81769c1..bc67cbf 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -653,6 +653,7 @@ __armv7_mmu_cache_on: mcrne p15, 0, r0, c8, c7, 0 @ flush I,D TLBs #endif mrc p15, 0, r0, c1, c0, 0 @ read control reg + bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer #ifdef CONFIG_MMU -- cgit v0.10.2 From 37407ea7f93864c2cfc03edf8f37872ec539ea2b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Sep 2012 12:29:43 -0700 Subject: Revert "sched: Improve scalability via 'CPU buddies', which withstand random perturbations" This reverts commit 970e178985cadbca660feb02f4d2ee3a09f7fdda. Nikolay Ulyanitsky reported thatthe 3.6-rc5 kernel has a 15-20% performance drop on PostgreSQL 9.2 on his machine (running "pgbench"). Borislav Petkov was able to reproduce this, and bisected it to this commit 970e178985ca ("sched: Improve scalability via 'CPU buddies' ...") apparently because the new single-idle-buddy model simply doesn't find idle CPU's to reschedule on aggressively enough. Mike Galbraith suspects that it is likely due to the user-mode spinlocks in PostgreSQL not reacting well to preemption, but we don't really know the details - I'll just revert the commit for now. There are hopefully other approaches to improve scheduler scalability without it causing these kinds of downsides. Reported-by: Nikolay Ulyanitsky Bisected-by: Borislav Petkov Acked-by: Mike Galbraith Cc: Andrew Morton Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Linus Torvalds diff --git a/include/linux/sched.h b/include/linux/sched.h index b8c8664..23bddac 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -954,7 +954,6 @@ struct sched_domain { unsigned int smt_gain; int flags; /* See SD_* */ int level; - int idle_buddy; /* cpu assigned to select_idle_sibling() */ /* Runtime fields. */ unsigned long last_balance; /* init to jiffies. units in jiffies */ diff --git a/kernel/sched/core.c b/kernel/sched/core.c index a4ea245..649c9f8 100644 --- a/kernel/sched/core.c +++ b/kernel/sched/core.c @@ -6014,11 +6014,6 @@ static void destroy_sched_domains(struct sched_domain *sd, int cpu) * SD_SHARE_PKG_RESOURCE set (Last Level Cache Domain) for this * allows us to avoid some pointer chasing select_idle_sibling(). * - * Iterate domains and sched_groups downward, assigning CPUs to be - * select_idle_sibling() hw buddy. Cross-wiring hw makes bouncing - * due to random perturbation self canceling, ie sw buddies pull - * their counterpart to their CPU's hw counterpart. - * * Also keep a unique ID per domain (we use the first cpu number in * the cpumask of the domain), this allows us to quickly tell if * two cpus are in the same cache domain, see cpus_share_cache(). @@ -6032,40 +6027,8 @@ static void update_top_cache_domain(int cpu) int id = cpu; sd = highest_flag_domain(cpu, SD_SHARE_PKG_RESOURCES); - if (sd) { - struct sched_domain *tmp = sd; - struct sched_group *sg, *prev; - bool right; - - /* - * Traverse to first CPU in group, and count hops - * to cpu from there, switching direction on each - * hop, never ever pointing the last CPU rightward. - */ - do { - id = cpumask_first(sched_domain_span(tmp)); - prev = sg = tmp->groups; - right = 1; - - while (cpumask_first(sched_group_cpus(sg)) != id) - sg = sg->next; - - while (!cpumask_test_cpu(cpu, sched_group_cpus(sg))) { - prev = sg; - sg = sg->next; - right = !right; - } - - /* A CPU went down, never point back to domain start. */ - if (right && cpumask_first(sched_group_cpus(sg->next)) == id) - right = false; - - sg = right ? sg->next : prev; - tmp->idle_buddy = cpumask_first(sched_group_cpus(sg)); - } while ((tmp = tmp->child)); - + if (sd) id = cpumask_first(sched_domain_span(sd)); - } rcu_assign_pointer(per_cpu(sd_llc, cpu), sd); per_cpu(sd_llc_id, cpu) = id; diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c index 42d9df6..96e2b18 100644 --- a/kernel/sched/fair.c +++ b/kernel/sched/fair.c @@ -2637,6 +2637,8 @@ static int select_idle_sibling(struct task_struct *p, int target) int cpu = smp_processor_id(); int prev_cpu = task_cpu(p); struct sched_domain *sd; + struct sched_group *sg; + int i; /* * If the task is going to be woken-up on this cpu and if it is @@ -2653,17 +2655,29 @@ static int select_idle_sibling(struct task_struct *p, int target) return prev_cpu; /* - * Otherwise, check assigned siblings to find an elegible idle cpu. + * Otherwise, iterate the domains and find an elegible idle cpu. */ sd = rcu_dereference(per_cpu(sd_llc, target)); - for_each_lower_domain(sd) { - if (!cpumask_test_cpu(sd->idle_buddy, tsk_cpus_allowed(p))) - continue; - if (idle_cpu(sd->idle_buddy)) - return sd->idle_buddy; - } + sg = sd->groups; + do { + if (!cpumask_intersects(sched_group_cpus(sg), + tsk_cpus_allowed(p))) + goto next; + for_each_cpu(i, sched_group_cpus(sg)) { + if (!idle_cpu(i)) + goto next; + } + + target = cpumask_first_and(sched_group_cpus(sg), + tsk_cpus_allowed(p)); + goto done; +next: + sg = sg->next; + } while (sg != sd->groups); + } +done: return target; } -- cgit v0.10.2 From 5698bd757d55b1bb87edd1a9744ab09c142abfc2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 16 Sep 2012 14:58:51 -0700 Subject: Linux 3.6-rc6 diff --git a/Makefile b/Makefile index 0f66f14..ae6928c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc5 +EXTRAVERSION = -rc6 NAME = Saber-toothed Squirrel # *DOCUMENTATION* -- cgit v0.10.2 From e376fdf42062e7373b82093b278f99aa2b547db7 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 17 Sep 2012 01:23:21 +0200 Subject: MIPS: Malta: Don't crash on spurious interrupt. 48d480b0bde794781fcae9501fb043c1bac0e523 [[MIPS] Malta: Fix off by one bug in interrupt handler.] did not take in account that irq_ffs() will also return 0 if for some reason the set of pending interrupts happens to be empty. This is trivial to trigger with a RM5261 CPU module running a 64-bit kernel and results in something like the following: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000000, epc == ffffffff801772d0, ra == ffffffff8017ad24 Oops[#1]: Cpu 0 $ 0 : 0000000000000000 ffffffff9000a4e0 ffffffff9000a4e0 ffffffff9000a4e0 $ 4 : ffffffff80592be0 0000000000000000 00000000000000d6 ffffffff80322ed0 $ 8 : ffffffff805fe538 0000000000000000 ffffffff9000a4e0 ffffffff80590000 $12 : 00000000000000d6 0000000000000000 ffffffff80600000 ffffffff805fe538 $16 : 0000000000000000 0000000000000010 ffffffff80592be0 0000000000000010 $20 : 0000000000000000 0000000000500001 0000000000000000 ffffffff8051e078 $24 : 0000000000000028 ffffffff803226e8 $28 : 9800000003828000 980000000382b900 ffffffff8051e060 ffffffff8017ad24 Hi : 0000000000000000 Lo : 0000006388974000 epc : ffffffff801772d0 handle_irq_event_percpu+0x70/0x2f0 Not tainted ra : ffffffff8017ad24 handle_percpu_irq+0x54/0x88 Status: 9000a4e2 KX SX UX KERNEL EXL Cause : 00808008 BadVA : 0000000000000000 PrId : 000028a0 (Nevada) Modules linked in: Process init (pid: 1, threadinfo=9800000003828000, task=9800000003827968, tls=0000000077087490) Stack : ffffffff80592be0 ffffffff8058d248 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ffffffff805a0000 0000000000000882 9800000003b89000 ffffffff8017ad24 00000000000000d5 0000000000000010 ffffffff9000a4e1 ffffffff801769f4 ffffffff9000a4e0 ffffffff801037f8 0000000000000000 ffffffff80101c44 0000000000000000 ffffffff9000a4e0 0000000000000000 9000000018000000 90000000180003f9 0000000000000001 0000000000000000 00000000000000ff 0000000000000018 0000000000000001 0000000000000001 00000000003fffff 0000000000000020 ffffffff802cf7ac ffffffff80208918 000000007fdadf08 ffffffff80612d88 ffffffff9000a4e1 0000000000000040 0000000000000000 ffffffff80613340 0000000000500001 ... Call Trace: [] handle_irq_event_percpu+0x70/0x2f0 [] handle_percpu_irq+0x54/0x88 [] generic_handle_irq+0x44/0x60 [] do_IRQ+0x48/0x70 [] ret_from_irq+0x0/0x4 [] serial8250_startup+0x310/0x870 [] uart_startup.part.7+0x9c/0x330 [] uart_open+0x15c/0x1b0 [] tty_open+0x1fc/0x720 [] chrdev_open+0x7c/0x180 [] do_dentry_open.isra.14+0x288/0x390 [] nameidata_to_filp+0x5c/0xc0 [] do_last.isra.33+0x330/0x8f0 [] path_openat+0xbc/0x440 [] do_filp_open+0x38/0xa8 [] do_sys_open+0x124/0x218 [] handle_sys+0x118/0x13c Code: 02d5a825 12800012 02a0b02d de850008 0040f809 0220202d 0040a82d 40026000 ---[ end trace 5d8e7b9a86badd2d ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Ralf Baechle diff --git a/arch/mips/mti-malta/malta-int.c b/arch/mips/mti-malta/malta-int.c index 7b13a4c..fea823f 100644 --- a/arch/mips/mti-malta/malta-int.c +++ b/arch/mips/mti-malta/malta-int.c @@ -273,16 +273,19 @@ asmlinkage void plat_irq_dispatch(void) unsigned int pending = read_c0_cause() & read_c0_status() & ST0_IM; int irq; + if (unlikely(!pending)) { + spurious_interrupt(); + return; + } + irq = irq_ffs(pending); if (irq == MIPSCPU_INT_I8259A) malta_hw0_irqdispatch(); else if (gic_present && ((1 << irq) & ipi_map[smp_processor_id()])) malta_ipi_irqdispatch(); - else if (irq >= 0) - do_IRQ(MIPS_CPU_IRQ_BASE + irq); else - spurious_interrupt(); + do_IRQ(MIPS_CPU_IRQ_BASE + irq); } #ifdef CONFIG_MIPS_MT_SMP -- cgit v0.10.2 From dbc5e1e89aafd484ad279ec6b9267dcd2c67df3f Mon Sep 17 00:00:00 2001 From: Mandeep Singh Baines Date: Mon, 27 Aug 2012 09:42:37 -0700 Subject: ARM: SAMSUNG: use spin_lock_irqsave() in clk_set_parent From 0cdf3aff, "ARM: SAMSUNG: use spin_lock_irqsave() in clk_{enable,disable}": The clk_enable()and clk_disable() can be used process and ISR either. And actually it is used for real product and other platforms use it now. So spin_lock_irqsave() should be used instead. We need to make a similar change in clk_set_parent(). Otherwise, you can potentially get spinlock recursion: BUG: spinlock recursion on CPU#0, kinteractive/68 lock: 807832a8, .magic: dead4ead, .owner: kinteractive/68, .owner_cpu: 0 [<80015f54>] (unwind_backtrace+0x0/0x128) from [<804f2914>] (dump_stack+0x20/0x24) [<804f2914>] (dump_stack+0x20/0x24) from [<804f57b8>] (spin_dump+0x80/0x94) [<804f57b8>] (spin_dump+0x80/0x94) from [<804f57f8>] (spin_bug+0x2c/0x30) [<804f57f8>] (spin_bug+0x2c/0x30) from [<80222730>] (do_raw_spin_lock+0x54/0x150) [<80222730>] (do_raw_spin_lock+0x54/0x150) from [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) [<804f96ec>] (_raw_spin_lock_irqsave+0x20/0x28) from [<80022ea4>] (clk_enable+0x3c/0x84) [<80022ea4>] (clk_enable+0x3c/0x84) from [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) [<8038336c>] (s5p_mfc_clock_on+0x60/0x74) from [<8038645c>] (s5p_mfc_read_info+0x20/0x38) [<8038645c>] (s5p_mfc_read_info+0x20/0x38) from [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) [<8037ca3c>] (s5p_mfc_handle_frame+0x2e4/0x4bc) from [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) [<8037d420>] (s5p_mfc_irq+0x1ec/0x6cc) from [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) [<8007fc74>] (handle_irq_event_percpu+0x8c/0x244) from [<8007fe78>] (handle_irq_event+0x4c/0x6c) [<8007fe78>] (handle_irq_event+0x4c/0x6c) from [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) [<80082dd8>] (handle_fasteoi_irq+0xe4/0x150) from [<8007f424>] (generic_handle_irq+0x3c/0x50) [<8007f424>] (generic_handle_irq+0x3c/0x50) from [<8000f7c4>] (handle_IRQ+0x88/0xc8) [<8000f7c4>] (handle_IRQ+0x88/0xc8) from [<80008564>] (gic_handle_irq+0x44/0x68) [<80008564>] (gic_handle_irq+0x44/0x68) from [<8000e400>] (__irq_svc+0x40/0x60) Exception stack(0xef3cbe68 to 0xef3cbeb0) [<8000e400>] (__irq_svc+0x40/0x60) from [<80022cfc>] (clk_set_parent+0x30/0x74) [<80022cfc>] (clk_set_parent+0x30/0x74) from [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) [<803ac7f8>] (set_apll.isra.0+0x28/0xb0) from [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) [<803ac8e4>] (exynos5250_set_frequency+0x64/0xb8) from [<803ac280>] (exynos_target+0x1b0/0x220) [<803ac280>] (exynos_target+0x1b0/0x220) from [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) [<803a4a0c>] (__cpufreq_driver_target+0xb0/0xd4) from [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) [<803aab80>] (cpufreq_interactive_updown_task+0x214/0x264) from [<80047d04>] (kthread+0x9c/0xa8) [<80047d04>] (kthread+0x9c/0xa8) from [<8000fa48>] (kernel_thread_exit+0x0/0x8) Signed-off-by: Mandeep Singh Baines Suggested-by: Sunil Mazhavanchery Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: Ben Dooks Cc: Russell King Cc: Minho Ban Cc: Jaecheol Lee Cc: Sunyoung Kang Cc: Olof Johansson Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 65c5eca..80eacca 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -173,17 +173,18 @@ struct clk *clk_get_parent(struct clk *clk) int clk_set_parent(struct clk *clk, struct clk *parent) { + unsigned long flags; int ret = 0; if (IS_ERR(clk)) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); if (clk->ops && clk->ops->set_parent) ret = (clk->ops->set_parent)(clk, parent); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } -- cgit v0.10.2 From 4db84d4f07b87c452c6000e0595dc9570ed21b41 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Mon, 10 Sep 2012 16:43:26 +0200 Subject: s390/mm: fix user access page-table walk code The s390 page-table walk code, used for user copy and futex, currently cannot handle huge pages. As far as user copy is concerned, that is not really a problem because those functions will only be used on old hardware that has no huge page support. But the futex code will also use pagetable walk functions on current hardware when user space runs in primary space mode. So, if a futex sits in a huge page, the futex operation on it will result in a page fault loop or even data corruption. This patch adds the code for resolving huge page mappings in the user access pagetable walk code on s390. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/lib/uaccess_pt.c b/arch/s390/lib/uaccess_pt.c index 60ee2b8..2d37bb8 100644 --- a/arch/s390/lib/uaccess_pt.c +++ b/arch/s390/lib/uaccess_pt.c @@ -2,69 +2,82 @@ * User access functions based on page table walks for enhanced * system layout without hardware support. * - * Copyright IBM Corp. 2006 + * Copyright IBM Corp. 2006, 2012 * Author(s): Gerald Schaefer (gerald.schaefer@de.ibm.com) */ #include #include #include +#include #include #include #include "uaccess.h" -static inline pte_t *follow_table(struct mm_struct *mm, unsigned long addr) + +/* + * Returns kernel address for user virtual address. If the returned address is + * >= -4095 (IS_ERR_VALUE(x) returns true), a fault has occured and the address + * contains the (negative) exception code. + */ +static __always_inline unsigned long follow_table(struct mm_struct *mm, + unsigned long addr, int write) { pgd_t *pgd; pud_t *pud; pmd_t *pmd; + pte_t *ptep; pgd = pgd_offset(mm, addr); if (pgd_none(*pgd) || unlikely(pgd_bad(*pgd))) - return (pte_t *) 0x3a; + return -0x3aUL; pud = pud_offset(pgd, addr); if (pud_none(*pud) || unlikely(pud_bad(*pud))) - return (pte_t *) 0x3b; + return -0x3bUL; pmd = pmd_offset(pud, addr); - if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd))) - return (pte_t *) 0x10; + if (pmd_none(*pmd)) + return -0x10UL; + if (pmd_huge(*pmd)) { + if (write && (pmd_val(*pmd) & _SEGMENT_ENTRY_RO)) + return -0x04UL; + return (pmd_val(*pmd) & HPAGE_MASK) + (addr & ~HPAGE_MASK); + } + if (unlikely(pmd_bad(*pmd))) + return -0x10UL; + + ptep = pte_offset_map(pmd, addr); + if (!pte_present(*ptep)) + return -0x11UL; + if (write && !pte_write(*ptep)) + return -0x04UL; - return pte_offset_map(pmd, addr); + return (pte_val(*ptep) & PAGE_MASK) + (addr & ~PAGE_MASK); } static __always_inline size_t __user_copy_pt(unsigned long uaddr, void *kptr, size_t n, int write_user) { struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, size; - pte_t *pte; + unsigned long offset, done, size, kaddr; void *from, *to; done = 0; retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) + kaddr = follow_table(mm, uaddr, write_user); + if (IS_ERR_VALUE(kaddr)) goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; - goto fault; - } else if (write_user && !pte_write(*pte)) { - pte = (pte_t *) 0x04; - goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE - 1); + offset = uaddr & ~PAGE_MASK; size = min(n - done, PAGE_SIZE - offset); if (write_user) { - to = (void *)((pfn << PAGE_SHIFT) + offset); + to = (void *) kaddr; from = kptr + done; } else { - from = (void *)((pfn << PAGE_SHIFT) + offset); + from = (void *) kaddr; to = kptr + done; } memcpy(to, from, size); @@ -75,7 +88,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, write_user)) + if (__handle_fault(uaddr, -kaddr, write_user)) return n - done; goto retry; } @@ -84,27 +97,22 @@ fault: * Do DAT for user address by page table walk, return kernel address. * This function needs to be called with current->mm->page_table_lock held. */ -static __always_inline unsigned long __dat_user_addr(unsigned long uaddr) +static __always_inline unsigned long __dat_user_addr(unsigned long uaddr, + int write) { struct mm_struct *mm = current->mm; - unsigned long pfn; - pte_t *pte; + unsigned long kaddr; int rc; retry: - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, write); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - return (pfn << PAGE_SHIFT) + (uaddr & (PAGE_SIZE - 1)); + return kaddr; fault: spin_unlock(&mm->page_table_lock); - rc = __handle_fault(uaddr, (unsigned long) pte, 0); + rc = __handle_fault(uaddr, -kaddr, write); spin_lock(&mm->page_table_lock); if (!rc) goto retry; @@ -159,11 +167,9 @@ static size_t clear_user_pt(size_t n, void __user *to) static size_t strnlen_user_pt(size_t count, const char __user *src) { - char *addr; unsigned long uaddr = (unsigned long) src; struct mm_struct *mm = current->mm; - unsigned long offset, pfn, done, len; - pte_t *pte; + unsigned long offset, done, len, kaddr; size_t len_str; if (segment_eq(get_fs(), KERNEL_DS)) @@ -172,19 +178,13 @@ static size_t strnlen_user_pt(size_t count, const char __user *src) retry: spin_lock(&mm->page_table_lock); do { - pte = follow_table(mm, uaddr); - if ((unsigned long) pte < 0x1000) - goto fault; - if (!pte_present(*pte)) { - pte = (pte_t *) 0x11; + kaddr = follow_table(mm, uaddr, 0); + if (IS_ERR_VALUE(kaddr)) goto fault; - } - pfn = pte_pfn(*pte); - offset = uaddr & (PAGE_SIZE-1); - addr = (char *)(pfn << PAGE_SHIFT) + offset; + offset = uaddr & ~PAGE_MASK; len = min(count - done, PAGE_SIZE - offset); - len_str = strnlen(addr, len); + len_str = strnlen((char *) kaddr, len); done += len_str; uaddr += len_str; } while ((len_str == len) && (done < count)); @@ -192,7 +192,7 @@ retry: return done + 1; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, (unsigned long) pte, 0)) + if (__handle_fault(uaddr, -kaddr, 0)) return 0; goto retry; } @@ -225,11 +225,10 @@ static size_t copy_in_user_pt(size_t n, void __user *to, const void __user *from) { struct mm_struct *mm = current->mm; - unsigned long offset_from, offset_to, offset_max, pfn_from, pfn_to, - uaddr, done, size, error_code; + unsigned long offset_max, uaddr, done, size, error_code; unsigned long uaddr_from = (unsigned long) from; unsigned long uaddr_to = (unsigned long) to; - pte_t *pte_from, *pte_to; + unsigned long kaddr_to, kaddr_from; int write_user; if (segment_eq(get_fs(), KERNEL_DS)) { @@ -242,38 +241,23 @@ retry: do { write_user = 0; uaddr = uaddr_from; - pte_from = follow_table(mm, uaddr_from); - error_code = (unsigned long) pte_from; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_from)) { - error_code = 0x11; + kaddr_from = follow_table(mm, uaddr_from, 0); + error_code = kaddr_from; + if (IS_ERR_VALUE(error_code)) goto fault; - } write_user = 1; uaddr = uaddr_to; - pte_to = follow_table(mm, uaddr_to); - error_code = (unsigned long) pte_to; - if (error_code < 0x1000) - goto fault; - if (!pte_present(*pte_to)) { - error_code = 0x11; + kaddr_to = follow_table(mm, uaddr_to, 1); + error_code = (unsigned long) kaddr_to; + if (IS_ERR_VALUE(error_code)) goto fault; - } else if (!pte_write(*pte_to)) { - error_code = 0x04; - goto fault; - } - pfn_from = pte_pfn(*pte_from); - pfn_to = pte_pfn(*pte_to); - offset_from = uaddr_from & (PAGE_SIZE-1); - offset_to = uaddr_from & (PAGE_SIZE-1); - offset_max = max(offset_from, offset_to); + offset_max = max(uaddr_from & ~PAGE_MASK, + uaddr_to & ~PAGE_MASK); size = min(n - done, PAGE_SIZE - offset_max); - memcpy((void *)(pfn_to << PAGE_SHIFT) + offset_to, - (void *)(pfn_from << PAGE_SHIFT) + offset_from, size); + memcpy((void *) kaddr_to, (void *) kaddr_from, size); done += size; uaddr_from += size; uaddr_to += size; @@ -282,7 +266,7 @@ retry: return n - done; fault: spin_unlock(&mm->page_table_lock); - if (__handle_fault(uaddr, error_code, write_user)) + if (__handle_fault(uaddr, -error_code, write_user)) return n - done; goto retry; } @@ -341,7 +325,7 @@ int futex_atomic_op_pt(int op, u32 __user *uaddr, int oparg, int *old) return __futex_atomic_op_pt(op, uaddr, oparg, old); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; @@ -378,7 +362,7 @@ int futex_atomic_cmpxchg_pt(u32 *uval, u32 __user *uaddr, return __futex_atomic_cmpxchg_pt(uval, uaddr, oldval, newval); spin_lock(¤t->mm->page_table_lock); uaddr = (u32 __force __user *) - __dat_user_addr((__force unsigned long) uaddr); + __dat_user_addr((__force unsigned long) uaddr, 1); if (!uaddr) { spin_unlock(¤t->mm->page_table_lock); return -EFAULT; -- cgit v0.10.2 From 12d7b1078bb374fc3e2955b9f2815415a66157b6 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Tue, 11 Sep 2012 15:10:58 +0200 Subject: s390/dasd: fix pathgroup race If a new path is available we need to verify the path data. If it is the first path for a device the stop bits are removed after path verification. If a pathgroup is established we need to set system characteristics for the lcu. Therefore I/O has to be started. If the device is stopped the set system characteristics worker may block the path verification worker and the device is blocked. Turn on failfast for set system characteristics CQR to prevent a deadlock with the path verification worker. If a pathgroup is established on a device that is not in use trigger path verification. Maybe we were not informed about a working path. Signed-off-by: Stefan Haberland Reviewed-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 6498d15..0595c76 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -2157,6 +2157,7 @@ static int _dasd_sleep_on(struct dasd_ccw_req *maincqr, int interruptible) test_bit(DASD_CQR_FLAGS_FAILFAST, &cqr->flags) && (!dasd_eer_enabled(device))) { cqr->status = DASD_CQR_FAILED; + cqr->intrc = -EAGAIN; continue; } /* Don't try to start requests if device is stopped */ @@ -3270,6 +3271,16 @@ void dasd_generic_path_event(struct ccw_device *cdev, int *path_event) dasd_schedule_device_bh(device); } if (path_event[chp] & PE_PATHGROUP_ESTABLISHED) { + if (!(device->path_data.opm & eventlpm) && + !(device->path_data.tbvpm & eventlpm)) { + /* + * we can not establish a pathgroup on an + * unavailable path, so trigger a path + * verification first + */ + device->path_data.tbvpm |= eventlpm; + dasd_schedule_device_bh(device); + } DBF_DEV_EVENT(DBF_WARNING, device, "%s", "Pathgroup re-established\n"); if (device->discipline->kick_validate) diff --git a/drivers/s390/block/dasd_eckd.c b/drivers/s390/block/dasd_eckd.c index 2fb2b9e..c48c72a 100644 --- a/drivers/s390/block/dasd_eckd.c +++ b/drivers/s390/block/dasd_eckd.c @@ -1507,7 +1507,8 @@ static struct dasd_ccw_req *dasd_eckd_build_psf_ssc(struct dasd_device *device, * call might change behaviour of DASD devices. */ static int -dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) +dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav, + unsigned long flags) { struct dasd_ccw_req *cqr; int rc; @@ -1516,10 +1517,19 @@ dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) if (IS_ERR(cqr)) return PTR_ERR(cqr); + /* + * set flags e.g. turn on failfast, to prevent blocking + * the calling function should handle failed requests + */ + cqr->flags |= flags; + rc = dasd_sleep_on(cqr); if (!rc) /* trigger CIO to reprobe devices */ css_schedule_reprobe(); + else if (cqr->intrc == -EAGAIN) + rc = -EAGAIN; + dasd_sfree_request(cqr, cqr->memdev); return rc; } @@ -1527,7 +1537,8 @@ dasd_eckd_psf_ssc(struct dasd_device *device, int enable_pav) /* * Valide storage server of current device. */ -static void dasd_eckd_validate_server(struct dasd_device *device) +static int dasd_eckd_validate_server(struct dasd_device *device, + unsigned long flags) { int rc; struct dasd_eckd_private *private; @@ -1536,17 +1547,18 @@ static void dasd_eckd_validate_server(struct dasd_device *device) private = (struct dasd_eckd_private *) device->private; if (private->uid.type == UA_BASE_PAV_ALIAS || private->uid.type == UA_HYPER_PAV_ALIAS) - return; + return 0; if (dasd_nopav || MACHINE_IS_VM) enable_pav = 0; else enable_pav = 1; - rc = dasd_eckd_psf_ssc(device, enable_pav); + rc = dasd_eckd_psf_ssc(device, enable_pav, flags); /* may be requested feature is not available on server, * therefore just report error and go ahead */ DBF_EVENT_DEVID(DBF_WARNING, device->cdev, "PSF-SSC for SSID %04x " "returned rc=%d", private->uid.ssid, rc); + return rc; } /* @@ -1556,7 +1568,13 @@ static void dasd_eckd_do_validate_server(struct work_struct *work) { struct dasd_device *device = container_of(work, struct dasd_device, kick_validate); - dasd_eckd_validate_server(device); + if (dasd_eckd_validate_server(device, DASD_CQR_FLAGS_FAILFAST) + == -EAGAIN) { + /* schedule worker again if failed */ + schedule_work(&device->kick_validate); + return; + } + dasd_put_device(device); } @@ -1685,7 +1703,7 @@ dasd_eckd_check_characteristics(struct dasd_device *device) if (rc) goto out_err2; - dasd_eckd_validate_server(device); + dasd_eckd_validate_server(device, 0); /* device may report different configuration data after LCU setup */ rc = dasd_eckd_read_conf(device); @@ -4153,7 +4171,7 @@ static int dasd_eckd_restore_device(struct dasd_device *device) rc = dasd_alias_make_device_known_to_lcu(device); if (rc) return rc; - dasd_eckd_validate_server(device); + dasd_eckd_validate_server(device, DASD_CQR_FLAGS_FAILFAST); /* RE-Read Configuration Data */ rc = dasd_eckd_read_conf(device); -- cgit v0.10.2 From 03429f34c22cedc3300a81e13d5790450cc468af Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Tue, 11 Sep 2012 17:19:12 +0200 Subject: s390/dasd: fix read unit address configuration loop Read unit address is done for all devices during online processing to read out LCU features. This is also done after disconnect/connect a LCU. Some older storage hardware does not provide the capability to read unit address configuration. This leads to a loop trying to read unit address configuration every 30 seconds. The device is still operational but logs are flooded with error messages. Fix the loop by recognizing a command reject saying that the suborder for ruac is not supported. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd_alias.c b/drivers/s390/block/dasd_alias.c index 157defe..6b55699 100644 --- a/drivers/s390/block/dasd_alias.c +++ b/drivers/s390/block/dasd_alias.c @@ -384,6 +384,29 @@ static void _remove_device_from_lcu(struct alias_lcu *lcu, group->next = NULL; }; +static int +suborder_not_supported(struct dasd_ccw_req *cqr) +{ + char *sense; + char reason; + char msg_format; + char msg_no; + + sense = dasd_get_sense(&cqr->irb); + if (!sense) + return 0; + + reason = sense[0]; + msg_format = (sense[7] & 0xF0); + msg_no = (sense[7] & 0x0F); + + /* command reject, Format 0 MSG 4 - invalid parameter */ + if ((reason == 0x80) && (msg_format == 0x00) && (msg_no == 0x04)) + return 1; + + return 0; +} + static int read_unit_address_configuration(struct dasd_device *device, struct alias_lcu *lcu) { @@ -435,6 +458,8 @@ static int read_unit_address_configuration(struct dasd_device *device, do { rc = dasd_sleep_on(cqr); + if (rc && suborder_not_supported(cqr)) + return -EOPNOTSUPP; } while (rc && (cqr->retries > 0)); if (rc) { spin_lock_irqsave(&lcu->lock, flags); @@ -521,7 +546,7 @@ static void lcu_update_work(struct work_struct *work) * processing the data */ spin_lock_irqsave(&lcu->lock, flags); - if (rc || (lcu->flags & NEED_UAC_UPDATE)) { + if ((rc && (rc != -EOPNOTSUPP)) || (lcu->flags & NEED_UAC_UPDATE)) { DBF_DEV_EVENT(DBF_WARNING, device, "could not update" " alias data in lcu (rc = %d), retry later", rc); schedule_delayed_work(&lcu->ruac_data.dwork, 30*HZ); -- cgit v0.10.2 From 5b5896e4e1f353ef3dbc4e4e9ee44d53ccf105d7 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 11 Sep 2012 12:37:55 +0200 Subject: drm/i915: enable lvds pin pairs before dpll on gen2 Otherwise things migt not work too well. Breakage introduced in commit eb1cbe4848b01f9f073064377875bc7d71eb401b Author: Daniel Vetter Date: Wed Mar 28 23:12:16 2012 +0200 drm/i915: split PLL update code out of i9xx_crtc_mode_set Cc: Jesse Barnes Cc: stable@vger.kernel.org (for 3.5 only) Reviewed-by: Jesse Barnes Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bc2ad34..c040aee 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -4191,12 +4191,6 @@ static void i8xx_update_pll(struct drm_crtc *crtc, POSTING_READ(DPLL(pipe)); udelay(150); - I915_WRITE(DPLL(pipe), dpll); - - /* Wait for the clocks to stabilize. */ - POSTING_READ(DPLL(pipe)); - udelay(150); - /* The LVDS pin pair needs to be on before the DPLLs are enabled. * This is an exception to the general rule that mode_set doesn't turn * things on. @@ -4204,6 +4198,12 @@ static void i8xx_update_pll(struct drm_crtc *crtc, if (intel_pipe_has_type(crtc, INTEL_OUTPUT_LVDS)) intel_update_lvds(crtc, clock, adjusted_mode); + I915_WRITE(DPLL(pipe), dpll); + + /* Wait for the clocks to stabilize. */ + POSTING_READ(DPLL(pipe)); + udelay(150); + /* The pixel multiplier can only be updated once the * DPLL is enabled and the clocks are stable. * -- cgit v0.10.2 From 7e81a42e341a4f15d76624b7c02ffb21b085b56f Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 15 Sep 2012 09:41:57 +0100 Subject: drm/i915: Reduce a pin-leak BUG into a WARN Pin-leaks persist and we get the perennial bug reports of machine lockups to the BUG_ON(pin_count==MAX). If we instead loudly report that the object cannot be pinned at that time it should prevent the driver from locking up, and hopefully restore a semblance of working whilst still leaving us a OOPS to debug. Signed-off-by: Chris Wilson Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 489e2b1..274d25d 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3242,7 +3242,8 @@ i915_gem_object_pin(struct drm_i915_gem_object *obj, { int ret; - BUG_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT); + if (WARN_ON(obj->pin_count == DRM_I915_GEM_OBJECT_MAX_PIN_COUNT)) + return -EBUSY; if (obj->gtt_space != NULL) { if ((alignment && obj->gtt_offset & (alignment - 1)) || -- cgit v0.10.2 From b98b60167279df3acac9422c3c9820d9ebbcf9fb Mon Sep 17 00:00:00 2001 From: Wang Xingchao Date: Thu, 13 Sep 2012 07:43:22 +0800 Subject: drm/i915: HDMI - Clear Audio Enable bit for Hot Plug Clear Audio Enable bit to trigger unsolicated event to notify Audio Driver part the HDMI hot plug change. The patch fixed the bug when remove HDMI cable the bit was not cleared correctly. In intel_hdmi_dpms(), if intel_hdmi->has_audio been true, the "Audio enable bit" will be set to trigger unsolicated event to notify Alsa driver the change. intel_hdmi->has_audio will be reset to false from intel_hdmi_detect() after remove the hdmi cable, here's debug log: [ 187.494153] [drm:output_poll_execute], [CONNECTOR:17:HDMI-A-1] status updated from 1 to 2 [ 187.525349] [drm:intel_hdmi_detect], HDMI: has_audio = 0 so when comes back to intel_hdmi_dpms(), the "Audio enable bit" will not be cleared. And this cause the eld infomation and pin presence doesnot update accordingly in alsa driver side. This patch will also trigger unsolicated event to alsa driver to notify the hot plug event: [ 187.853159] ALSA sound/pci/hda/patch_hdmi.c:772 HDMI hot plug event: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=1 [ 187.853268] ALSA sound/pci/hda/patch_hdmi.c:990 HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 Signed-off-by: Wang Xingchao Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c index 98f6024..12dc330 100644 --- a/drivers/gpu/drm/i915/intel_hdmi.c +++ b/drivers/gpu/drm/i915/intel_hdmi.c @@ -609,7 +609,7 @@ static void intel_hdmi_dpms(struct drm_encoder *encoder, int mode) u32 temp; u32 enable_bits = SDVO_ENABLE; - if (intel_hdmi->has_audio) + if (intel_hdmi->has_audio || mode != DRM_MODE_DPMS_ON) enable_bits |= SDVO_AUDIO_ENABLE; temp = I915_READ(intel_hdmi->sdvox_reg); -- cgit v0.10.2 From 51ac51a6a5ab5f0aff46c4757ba4c32f3f8f7a2e Mon Sep 17 00:00:00 2001 From: Jean-Christophe PLAGNIOL-VILLARD Date: Thu, 13 Sep 2012 12:40:26 +0200 Subject: ARM: at91: fix missing #interrupt-cells on gpio-controller Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Tested-by: Bo Shen Signed-off-by: Nicolas Ferre diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index 66389c1..7c95f76 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -104,6 +104,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -113,6 +114,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -122,6 +124,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index b460d6c..195019b 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -95,6 +95,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -104,6 +105,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -113,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -122,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -131,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index bafa880..63751b1 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -113,6 +113,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff400 { @@ -122,6 +123,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff600 { @@ -131,6 +133,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffff800 { @@ -140,6 +143,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioE: gpio@fffffa00 { @@ -149,6 +153,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@ffffee00 { diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index bfac0df..ef9336a 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -107,6 +107,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -116,6 +117,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -125,6 +127,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -134,6 +137,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 4a18c39..8a387a8 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -115,6 +115,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioB: gpio@fffff600 { @@ -124,6 +125,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioC: gpio@fffff800 { @@ -133,6 +135,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; pioD: gpio@fffffa00 { @@ -142,6 +145,7 @@ #gpio-cells = <2>; gpio-controller; interrupt-controller; + #interrupt-cells = <2>; }; dbgu: serial@fffff200 { -- cgit v0.10.2 From d6532207116307eb7ecbfa7b9e02c53230096a50 Mon Sep 17 00:00:00 2001 From: Eddie Wai Date: Tue, 21 Aug 2012 10:35:53 -0700 Subject: [SCSI] bnx2i: Fixed NULL ptr deference for 1G bnx2 Linux iSCSI offload This patch fixes the following kernel panic invoked by uninitialized fields in the chip initialization for the 1G bnx2 iSCSI offload. One of the bits in the chip initialization is being used by the latest firmware to control overflow packets. When this control bit gets enabled erroneously, it would ultimately result in a bad packet placement which would cause the bnx2 driver to dereference a NULL ptr in the placement handler. This can happen under certain stress I/O environment under the Linux iSCSI offload operation. This change only affects Broadcom's 5709 chipset. Unable to handle kernel NULL pointer dereference at 0000000000000008 RIP: [] :bnx2:bnx2_poll_work+0xd0d/0x13c5 Pid: 0, comm: swapper Tainted: G ---- 2.6.18-333.el5debug #2 RIP: 0010:[] [] :bnx2:bnx2_poll_work+0xd0d/0x13c5 RSP: 0018:ffff8101b575bd50 EFLAGS: 00010216 RAX: 0000000000000005 RBX: ffff81007c5fb180 RCX: 0000000000000000 RDX: 0000000000000ffc RSI: 00000000817e8000 RDI: 0000000000000220 RBP: ffff81015bbd7ec0 R08: ffff8100817e9000 R09: 0000000000000000 R10: ffff81007c5fb180 R11: 00000000000000c8 R12: 000000007a25a010 R13: 0000000000000000 R14: 0000000000000005 R15: ffff810159f80558 FS: 0000000000000000(0000) GS:ffff8101afebc240(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000008 CR3: 0000000000201000 CR4: 00000000000006a0 Process swapper (pid: 0, threadinfo ffff8101b5754000, task ffff8101afebd820) Stack: 000000000000000b ffff810159f80000 0000000000000040 ffff810159f80520 ffff810159f80500 00cf00cf8008e84b ffffc200100939e0 ffff810009035b20 0000502900000000 000000be00000001 ffff8100817e7810 00d08101b575bea8 Call Trace: [] show_schedstat+0x1c2/0x25b [] :bnx2:bnx2_poll+0xf6/0x231 [] net_rx_action+0xac/0x1b1 [] __do_softirq+0x89/0x133 [] call_softirq+0x1c/0x28 [] do_softirq+0x2c/0x7d [] do_IRQ+0xee/0xf7 [] ret_from_intr+0x0/0xa [] acpi_processor_idle_simple+0x1c5/0x341 [] acpi_processor_idle_simple+0x182/0x341 [] acpi_processor_idle_simple+0x0/0x341 [] cpu_idle+0x95/0xb8 [] start_secondary+0x479/0x488 Signed-off-by: Eddie Wai Cc: stable@vger.kernel.org Reviewed-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 33d6630..91eec60 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -1264,6 +1264,9 @@ int bnx2i_send_fw_iscsi_init_msg(struct bnx2i_hba *hba) int rc = 0; u64 mask64; + memset(&iscsi_init, 0x00, sizeof(struct iscsi_kwqe_init1)); + memset(&iscsi_init2, 0x00, sizeof(struct iscsi_kwqe_init2)); + bnx2i_adjust_qp_size(hba); iscsi_init.flags = -- cgit v0.10.2 From 10cce6d8b5af0b32bc4254ae4a28423a74c0921c Mon Sep 17 00:00:00 2001 From: "sreekanth.reddy@lsi.com" Date: Wed, 22 Aug 2012 16:55:13 +0530 Subject: [SCSI] mpt2sas: Fix for issue - Unable to boot from the drive connected to HBA This patch checks whether HBA is SAS2008 B0 controller. if it is a SAS2008 B0 controller then it use IO-APIC interrupt instead of MSIX, as SAS2008 B0 controller doesn't support MSIX interrupts. [jejb: fix whitespace problems] Signed-off-by: Sreekanth Reddy Cc: Signed-off-by: James Bottomley diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c index b25757d..9d5a56c 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_base.c +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c @@ -1209,6 +1209,13 @@ _base_check_enable_msix(struct MPT2SAS_ADAPTER *ioc) u16 message_control; + /* Check whether controller SAS2008 B0 controller, + if it is SAS2008 B0 controller use IO-APIC instead of MSIX */ + if (ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008 && + ioc->pdev->revision == 0x01) { + return -EINVAL; + } + base = pci_find_capability(ioc->pdev, PCI_CAP_ID_MSIX); if (!base) { dfailprintk(ioc, printk(MPT2SAS_INFO_FMT "msix not " -- cgit v0.10.2 From 6bf6104573482570f7103d3e5ddf9574db43a363 Mon Sep 17 00:00:00 2001 From: Francesco Ruggeri Date: Thu, 13 Sep 2012 15:03:37 -0700 Subject: fs/proc: fix potential unregister_sysctl_table hang The unregister_sysctl_table() function hangs if all references to its ctl_table_header structure are not dropped. This can happen sometimes because of a leak in proc_sys_lookup(): proc_sys_lookup() gets a reference to the table via lookup_entry(), but it does not release it when a subsequent call to sysctl_follow_link() fails. This patch fixes this leak by making sure the reference is always dropped on return. See also commit 076c3eed2c31 ("sysctl: Rewrite proc_sys_lookup introducing find_entry and lookup_entry") which reorganized this code in 3.4. Tested in Linux 3.4.4. Signed-off-by: Francesco Ruggeri Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/fs/proc/proc_sysctl.c b/fs/proc/proc_sysctl.c index dfafeb2..eb7cc91 100644 --- a/fs/proc/proc_sysctl.c +++ b/fs/proc/proc_sysctl.c @@ -462,9 +462,6 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry, err = ERR_PTR(-ENOMEM); inode = proc_sys_make_inode(dir->i_sb, h ? h : head, p); - if (h) - sysctl_head_finish(h); - if (!inode) goto out; @@ -473,6 +470,8 @@ static struct dentry *proc_sys_lookup(struct inode *dir, struct dentry *dentry, d_add(dentry, inode); out: + if (h) + sysctl_head_finish(h); sysctl_head_finish(head); return err; } -- cgit v0.10.2 From 2f1f4d9b60396d2df4cff829bd5376ffc8ed9a2c Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 17 Sep 2012 17:26:24 -0400 Subject: Revert "drm/radeon: rework pll selection (v3)" This reverts commit 985f61f7ee647ad570c05eab0b74915da2ac8e19. This commit fixed certain cases, but ended up regressing others due to limitations in the current KMS API. A proper fix is too invasive for 3.6. Push it back to 3.7. Reported-by: Andres Freund Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index e721e30..2817101 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1479,98 +1479,14 @@ static void radeon_legacy_atom_fixup(struct drm_crtc *crtc) } } -/** - * radeon_get_pll_use_mask - look up a mask of which pplls are in use - * - * @crtc: drm crtc - * - * Returns the mask of which PPLLs (Pixel PLLs) are in use. - */ -static u32 radeon_get_pll_use_mask(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_crtc *test_crtc; - struct radeon_crtc *radeon_test_crtc; - u32 pll_in_use = 0; - - list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { - if (crtc == test_crtc) - continue; - - radeon_test_crtc = to_radeon_crtc(test_crtc); - if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID) - pll_in_use |= (1 << radeon_test_crtc->pll_id); - } - return pll_in_use; -} - -/** - * radeon_get_shared_dp_ppll - return the PPLL used by another crtc for DP - * - * @crtc: drm crtc - * - * Returns the PPLL (Pixel PLL) used by another crtc/encoder which is - * also in DP mode. For DP, a single PPLL can be used for all DP - * crtcs/encoders. - */ -static int radeon_get_shared_dp_ppll(struct drm_crtc *crtc) -{ - struct drm_device *dev = crtc->dev; - struct drm_encoder *test_encoder; - struct radeon_crtc *radeon_test_crtc; - - list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { - if (test_encoder->crtc && (test_encoder->crtc != crtc)) { - if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { - /* for DP use the same PLL for all */ - radeon_test_crtc = to_radeon_crtc(test_encoder->crtc); - if (radeon_test_crtc->pll_id != ATOM_PPLL_INVALID) - return radeon_test_crtc->pll_id; - } - } - } - return ATOM_PPLL_INVALID; -} - -/** - * radeon_atom_pick_pll - Allocate a PPLL for use by the crtc. - * - * @crtc: drm crtc - * - * Returns the PPLL (Pixel PLL) to be used by the crtc. For DP monitors - * a single PPLL can be used for all DP crtcs/encoders. For non-DP - * monitors a dedicated PPLL must be used. If a particular board has - * an external DP PLL, return ATOM_PPLL_INVALID to skip PLL programming - * as there is no need to program the PLL itself. If we are not able to - * allocate a PLL, return ATOM_PPLL_INVALID to skip PLL programming to - * avoid messing up an existing monitor. - * - * Asic specific PLL information - * - * DCE 6.1 - * - PPLL2 is only available to UNIPHYA (both DP and non-DP) - * - PPLL0, PPLL1 are available for UNIPHYB/C/D/E/F (both DP and non-DP) - * - * DCE 6.0 - * - PPLL0 is available to all UNIPHY (DP only) - * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC - * - * DCE 5.0 - * - DCPLL is available to all UNIPHY (DP only) - * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC - * - * DCE 3.0/4.0/4.1 - * - PPLL1, PPLL2 are available for all UNIPHY (both DP and non-DP) and DAC - * - */ static int radeon_atom_pick_pll(struct drm_crtc *crtc) { struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc); struct drm_device *dev = crtc->dev; struct radeon_device *rdev = dev->dev_private; struct drm_encoder *test_encoder; - u32 pll_in_use; - int pll; + struct drm_crtc *test_crtc; + uint32_t pll_in_use = 0; if (ASIC_IS_DCE61(rdev)) { list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { @@ -1582,40 +1498,32 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) if ((test_radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_UNIPHY) && - (dig->linkb == false)) - /* UNIPHY A uses PPLL2 */ + (dig->linkb == false)) /* UNIPHY A uses PPLL2 */ return ATOM_PPLL2; - else if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { - /* UNIPHY B/C/D/E/F */ - if (rdev->clock.dp_extclk) - /* skip PPLL programming if using ext clock */ - return ATOM_PPLL_INVALID; - else { - /* use the same PPLL for all DP monitors */ - pll = radeon_get_shared_dp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } - } - break; } } /* UNIPHY B/C/D/E/F */ - pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL0))) + list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { + struct radeon_crtc *radeon_test_crtc; + + if (crtc == test_crtc) + continue; + + radeon_test_crtc = to_radeon_crtc(test_crtc); + if ((radeon_test_crtc->pll_id == ATOM_PPLL0) || + (radeon_test_crtc->pll_id == ATOM_PPLL1)) + pll_in_use |= (1 << radeon_test_crtc->pll_id); + } + if (!(pll_in_use & 4)) return ATOM_PPLL0; - if (!(pll_in_use & (1 << ATOM_PPLL1))) - return ATOM_PPLL1; - DRM_ERROR("unable to allocate a PPLL\n"); - return ATOM_PPLL_INVALID; + return ATOM_PPLL1; } else if (ASIC_IS_DCE4(rdev)) { list_for_each_entry(test_encoder, &dev->mode_config.encoder_list, head) { if (test_encoder->crtc && (test_encoder->crtc == crtc)) { /* in DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock, * depending on the asic: * DCE4: PPLL or ext clock - * DCE5: PPLL, DCPLL, or ext clock - * DCE6: PPLL, PPLL0, or ext clock + * DCE5: DCPLL or ext clock * * Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip * PPLL/DCPLL programming and only program the DP DTO for the @@ -1623,34 +1531,31 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) */ if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(test_encoder))) { if (rdev->clock.dp_extclk) - /* skip PPLL programming if using ext clock */ return ATOM_PPLL_INVALID; else if (ASIC_IS_DCE6(rdev)) - /* use PPLL0 for all DP */ return ATOM_PPLL0; else if (ASIC_IS_DCE5(rdev)) - /* use DCPLL for all DP */ return ATOM_DCPLL; - else { - /* use the same PPLL for all DP monitors */ - pll = radeon_get_shared_dp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } } - break; } } - /* all other cases */ - pll_in_use = radeon_get_pll_use_mask(crtc); - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; - if (!(pll_in_use & (1 << ATOM_PPLL1))) + + /* otherwise, pick one of the plls */ + list_for_each_entry(test_crtc, &dev->mode_config.crtc_list, head) { + struct radeon_crtc *radeon_test_crtc; + + if (crtc == test_crtc) + continue; + + radeon_test_crtc = to_radeon_crtc(test_crtc); + if ((radeon_test_crtc->pll_id >= ATOM_PPLL1) && + (radeon_test_crtc->pll_id <= ATOM_PPLL2)) + pll_in_use |= (1 << radeon_test_crtc->pll_id); + } + if (!(pll_in_use & 1)) return ATOM_PPLL1; - DRM_ERROR("unable to allocate a PPLL\n"); - return ATOM_PPLL_INVALID; + return ATOM_PPLL2; } else - /* use PPLL1 or PPLL2 */ return radeon_crtc->crtc_id; } @@ -1792,7 +1697,7 @@ static void atombios_crtc_disable(struct drm_crtc *crtc) break; } done: - radeon_crtc->pll_id = ATOM_PPLL_INVALID; + radeon_crtc->pll_id = -1; } static const struct drm_crtc_helper_funcs atombios_helper_funcs = { @@ -1841,6 +1746,6 @@ void radeon_atombios_init_crtc(struct drm_device *dev, else radeon_crtc->crtc_offset = 0; } - radeon_crtc->pll_id = ATOM_PPLL_INVALID; + radeon_crtc->pll_id = -1; drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs); } -- cgit v0.10.2 From 4e21f4eaa49f78d3e977e316514c941053871c76 Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 11 Sep 2012 13:39:08 -0700 Subject: hwmon: (ads7871) Add 'name' sysfs attribute The 'name' sysfs attribute is mandatory for hwmon devices, but was missing in this driver. Cc: Paul Thomas Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Acked-by: Paul Thomas diff --git a/drivers/hwmon/ads7871.c b/drivers/hwmon/ads7871.c index e65c6e4..7bf4ce3 100644 --- a/drivers/hwmon/ads7871.c +++ b/drivers/hwmon/ads7871.c @@ -139,6 +139,12 @@ static ssize_t show_voltage(struct device *dev, } } +static ssize_t ads7871_show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", to_spi_device(dev)->modalias); +} + static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_voltage, NULL, 0); static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_voltage, NULL, 1); static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_voltage, NULL, 2); @@ -148,6 +154,8 @@ static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_voltage, NULL, 5); static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_voltage, NULL, 6); static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_voltage, NULL, 7); +static DEVICE_ATTR(name, S_IRUGO, ads7871_show_name, NULL); + static struct attribute *ads7871_attributes[] = { &sensor_dev_attr_in0_input.dev_attr.attr, &sensor_dev_attr_in1_input.dev_attr.attr, @@ -157,6 +165,7 @@ static struct attribute *ads7871_attributes[] = { &sensor_dev_attr_in5_input.dev_attr.attr, &sensor_dev_attr_in6_input.dev_attr.attr, &sensor_dev_attr_in7_input.dev_attr.attr, + &dev_attr_name.attr, NULL }; -- cgit v0.10.2 From 18b48d5873a6fc8e0e6044ddb572fcda26988f19 Mon Sep 17 00:00:00 2001 From: Wen Congyang Date: Mon, 17 Sep 2012 14:08:55 -0700 Subject: memory hotplug: reset pgdat->kswapd to NULL if creating kernel thread fails If kthread_run() fails, pgdat->kswapd contains errno. When we stop this thread, we only check whether pgdat->kswapd is NULL and access it. If it contains errno, it will cause page fault. Reset pgdat->kswapd to NULL when creating kernel thread fails can avoid this problem. Signed-off-by: Wen Congyang Reviewed-by: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 8d01243..99b434b 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -3102,6 +3102,7 @@ int kswapd_run(int nid) /* failure at boot is fatal */ BUG_ON(system_state == SYSTEM_BOOTING); printk("Failed to start kswapd on node %d\n",nid); + pgdat->kswapd = NULL; ret = -1; } return ret; -- cgit v0.10.2 From 05cf96398e1b6502f9e191291b715c7463c9d5dd Mon Sep 17 00:00:00 2001 From: Jianguo Wu Date: Mon, 17 Sep 2012 14:08:56 -0700 Subject: mm/ia64: fix a memory block size bug I found following definition in include/linux/memory.h, in my IA64 platform, SECTION_SIZE_BITS is equal to 32, and MIN_MEMORY_BLOCK_SIZE will be 0. #define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) Because MIN_MEMORY_BLOCK_SIZE is int type and length of 32bits, so MIN_MEMORY_BLOCK_SIZE(1 << 32) will will equal to 0. Actually when SECTION_SIZE_BITS >= 31, MIN_MEMORY_BLOCK_SIZE will be wrong. This will cause wrong system memory infomation in sysfs. I think it should be: #define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS) And "echo offline > memory0/state" will cause following call trace: kernel BUG at mm/memory_hotplug.c:885! sh[6455]: bugcheck! 0 [1] Pid: 6455, CPU 0, comm: sh psr : 0000101008526030 ifs : 8000000000000fa4 ip : [] Not tainted (3.6.0-rc1) ip is at offline_pages+0x210/0xee0 Call Trace: show_stack+0x80/0xa0 show_regs+0x640/0x920 die+0x190/0x2c0 die_if_kernel+0x50/0x80 ia64_bad_break+0x3d0/0x6e0 ia64_native_leave_kernel+0x0/0x270 offline_pages+0x210/0xee0 alloc_pages_current+0x180/0x2a0 Signed-off-by: Jianguo Wu Signed-off-by: Jiang Liu Cc: "Luck, Tony" Reviewed-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/memory.h b/include/linux/memory.h index 1ac7f6e..ff9a9f8 100644 --- a/include/linux/memory.h +++ b/include/linux/memory.h @@ -19,7 +19,7 @@ #include #include -#define MIN_MEMORY_BLOCK_SIZE (1 << SECTION_SIZE_BITS) +#define MIN_MEMORY_BLOCK_SIZE (1UL << SECTION_SIZE_BITS) struct memory_block { unsigned long start_section_nr; -- cgit v0.10.2 From e9b7d7c81d9bdb41a897a2983ae3386a5fd4a1e3 Mon Sep 17 00:00:00 2001 From: Gang Wei Date: Mon, 17 Sep 2012 14:08:59 -0700 Subject: MAINTAINERS: fix TXT maintainer list and source repo path Signed-off-by: Gang Wei Cc: Richard L Maliszewski Cc: Gang Wei Cc: Shane Wang Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 53cc13c..b17587d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3666,11 +3666,12 @@ F: Documentation/networking/README.ipw2200 F: drivers/net/wireless/ipw2x00/ INTEL(R) TRUSTED EXECUTION TECHNOLOGY (TXT) -M: Joseph Cihula +M: Richard L Maliszewski +M: Gang Wei M: Shane Wang L: tboot-devel@lists.sourceforge.net W: http://tboot.sourceforge.net -T: Mercurial http://www.bughost.org/repos.hg/tboot.hg +T: hg http://tboot.hg.sourceforge.net:8000/hgroot/tboot/tboot S: Supported F: Documentation/intel_txt.txt F: include/linux/tboot.h -- cgit v0.10.2 From fded4e090c60100d709318896c79816d68d5b47d Mon Sep 17 00:00:00 2001 From: Paul Clements Date: Mon, 17 Sep 2012 14:09:02 -0700 Subject: nbd: clear waiting_queue on shutdown Fix a serious but uncommon bug in nbd which occurs when there is heavy I/O going to the nbd device while, at the same time, a failure (server, network) or manual disconnect of the nbd connection occurs. There is a small window between the time that the nbd_thread is stopped and the socket is shutdown where requests can continue to be queued to nbd's internal waiting_queue. When this happens, those requests are never completed or freed. The fix is to clear the waiting_queue on shutdown of the nbd device, in the same way that the nbd request queue (queue_head) is already being cleared. Signed-off-by: Paul Clements Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c index d07c9f7..0c03411 100644 --- a/drivers/block/nbd.c +++ b/drivers/block/nbd.c @@ -449,6 +449,14 @@ static void nbd_clear_que(struct nbd_device *nbd) req->errors++; nbd_end_request(req); } + + while (!list_empty(&nbd->waiting_queue)) { + req = list_entry(nbd->waiting_queue.next, struct request, + queuelist); + list_del_init(&req->queuelist); + req->errors++; + nbd_end_request(req); + } } @@ -598,6 +606,7 @@ static int __nbd_ioctl(struct block_device *bdev, struct nbd_device *nbd, nbd->file = NULL; nbd_clear_que(nbd); BUG_ON(!list_empty(&nbd->queue_head)); + BUG_ON(!list_empty(&nbd->waiting_queue)); if (file) fput(file); return 0; -- cgit v0.10.2 From 30c29bea6af2d3b6ffc8865864de7fc08cadb5df Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 17 Sep 2012 14:09:03 -0700 Subject: slab: do ClearSlabPfmemalloc() for all pages of slab Right now, we call ClearSlabPfmemalloc() for first page of slab when we clear SlabPfmemalloc flag. This is fine for most swap-over-network use cases as it is expected that order-0 pages are in use. Unfortunately it is possible that that __ac_put_obj() checks SlabPfmemalloc on a tail page and while this is harmless, it is sloppy. This patch ensures that the head page is always used. This problem was originally identified by Joonsoo Kim. [js1304@gmail.com: Original implementation and problem identification] Signed-off-by: Mel Gorman Cc: David Miller Cc: Chuck Lever Cc: Joonsoo Kim Cc: David Rientjes Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/slab.c b/mm/slab.c index 811af03..d34a903 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -1000,7 +1000,7 @@ static void *__ac_get_obj(struct kmem_cache *cachep, struct array_cache *ac, l3 = cachep->nodelists[numa_mem_id()]; if (!list_empty(&l3->slabs_free) && force_refill) { struct slab *slabp = virt_to_slab(objp); - ClearPageSlabPfmemalloc(virt_to_page(slabp->s_mem)); + ClearPageSlabPfmemalloc(virt_to_head_page(slabp->s_mem)); clear_obj_pfmemalloc(&objp); recheck_pfmemalloc_active(cachep, ac); return objp; @@ -1032,7 +1032,7 @@ static void *__ac_put_obj(struct kmem_cache *cachep, struct array_cache *ac, { if (unlikely(pfmemalloc_active)) { /* Some pfmemalloc slabs exist, check if this is one */ - struct page *page = virt_to_page(objp); + struct page *page = virt_to_head_page(objp); if (PageSlabPfmemalloc(page)) set_obj_pfmemalloc(&objp); } -- cgit v0.10.2 From d014dc2ed4fae84cb92509416c8bfc9078d4f0d9 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Mon, 17 Sep 2012 14:09:06 -0700 Subject: slab: fix starting index for finding another object In array cache, there is a object at index 0, check it. Signed-off-by: Joonsoo Kim Signed-off-by: Mel Gorman Cc: David Miller Cc: Chuck Lever Cc: David Rientjes Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/slab.c b/mm/slab.c index d34a903..c685475 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -983,7 +983,7 @@ static void *__ac_get_obj(struct kmem_cache *cachep, struct array_cache *ac, } /* The caller cannot use PFMEMALLOC objects, find another one */ - for (i = 1; i < ac->avail; i++) { + for (i = 0; i < ac->avail; i++) { /* If a !PFMEMALLOC object is found, swap them */ if (!is_obj_pfmemalloc(ac->entry[i])) { objp = ac->entry[i]; -- cgit v0.10.2 From 8ba00bb68a067c221cc3ea3a0293e8fcbdcb7ba1 Mon Sep 17 00:00:00 2001 From: Joonsoo Kim Date: Mon, 17 Sep 2012 14:09:09 -0700 Subject: slub: consider pfmemalloc_match() in get_partial_node() get_partial() is currently not checking pfmemalloc_match() meaning that it is possible for pfmemalloc pages to leak to non-pfmemalloc users. This is a problem in the following situation. Assume that there is a request from normal allocation and there are no objects in the per-cpu cache and no node-partial slab. In this case, slab_alloc enters the slow path and new_slab_objects() is called which may return a PFMEMALLOC page. As the current user is not allowed to access PFMEMALLOC page, deactivate_slab() is called ([5091b74a: mm: slub: optimise the SLUB fast path to avoid pfmemalloc checks]) and returns an object from PFMEMALLOC page. Next time, when we get another request from normal allocation, slab_alloc() enters the slow-path and calls new_slab_objects(). In new_slab_objects(), we call get_partial() and get a partial slab which was just deactivated but is a pfmemalloc page. We extract one object from it and re-deactivate. "deactivate -> re-get in get_partial -> re-deactivate" occures repeatedly. As a result, access to PFMEMALLOC page is not properly restricted and it can cause a performance degradation due to frequent deactivation. deactivation frequently. This patch changes get_partial_node() to take pfmemalloc_match() into account and prevents the "deactivate -> re-get in get_partial() scenario. Instead, new_slab() is called. Signed-off-by: Joonsoo Kim Acked-by: David Rientjes Signed-off-by: Mel Gorman Cc: David Miller Cc: Chuck Lever Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/slub.c b/mm/slub.c index 8f78e25..2fdd96f 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -1524,12 +1524,13 @@ static inline void *acquire_slab(struct kmem_cache *s, } static int put_cpu_partial(struct kmem_cache *s, struct page *page, int drain); +static inline bool pfmemalloc_match(struct page *page, gfp_t gfpflags); /* * Try to allocate a partial slab from a specific node. */ -static void *get_partial_node(struct kmem_cache *s, - struct kmem_cache_node *n, struct kmem_cache_cpu *c) +static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n, + struct kmem_cache_cpu *c, gfp_t flags) { struct page *page, *page2; void *object = NULL; @@ -1545,9 +1546,13 @@ static void *get_partial_node(struct kmem_cache *s, spin_lock(&n->list_lock); list_for_each_entry_safe(page, page2, &n->partial, lru) { - void *t = acquire_slab(s, n, page, object == NULL); + void *t; int available; + if (!pfmemalloc_match(page, flags)) + continue; + + t = acquire_slab(s, n, page, object == NULL); if (!t) break; @@ -1614,7 +1619,7 @@ static void *get_any_partial(struct kmem_cache *s, gfp_t flags, if (n && cpuset_zone_allowed_hardwall(zone, flags) && n->nr_partial > s->min_partial) { - object = get_partial_node(s, n, c); + object = get_partial_node(s, n, c, flags); if (object) { /* * Return the object even if @@ -1643,7 +1648,7 @@ static void *get_partial(struct kmem_cache *s, gfp_t flags, int node, void *object; int searchnode = (node == NUMA_NO_NODE) ? numa_node_id() : node; - object = get_partial_node(s, get_node(s, searchnode), c); + object = get_partial_node(s, get_node(s, searchnode), c, flags); if (object || node != NUMA_NO_NODE) return object; -- cgit v0.10.2 From 35c448a8a3471b95ebc0ebcf91eb1183401b4274 Mon Sep 17 00:00:00 2001 From: Chuck Lever Date: Mon, 17 Sep 2012 14:09:11 -0700 Subject: include/net/sock.h: squelch compiler warning in sk_rmem_schedule() This warning: In file included from linux/include/linux/tcp.h:227:0, from linux/include/linux/ipv6.h:221, from linux/include/net/ipv6.h:16, from linux/include/linux/sunrpc/clnt.h:26, from linux/net/sunrpc/stats.c:22: linux/include/net/sock.h: In function `sk_rmem_schedule': linux/nfs-2.6/include/net/sock.h:1339:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare] is seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2) using the -Wextra option. Commit c76562b6709f ("netvm: prevent a stream-specific deadlock") accidentally replaced the "size" parameter of sk_rmem_schedule() with an unsigned int. This changes the semantics of the comparison in the return statement. In sk_wmem_schedule we have syntactically the same comparison, but "size" is a signed integer. In addition, __sk_mem_schedule() takes a signed integer for its "size" parameter, so there is an implicit type conversion in sk_rmem_schedule() anyway. Revert the "size" parameter back to a signed integer so that the semantics of the expressions in both sk_[rw]mem_schedule() are exactly the same. Signed-off-by: Chuck Lever Signed-off-by: Mel Gorman Cc: David Miller Cc: Joonsoo Kim Cc: David Rientjes Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/net/sock.h b/include/net/sock.h index 72132ae..adb7da2 100644 --- a/include/net/sock.h +++ b/include/net/sock.h @@ -1332,7 +1332,7 @@ static inline bool sk_wmem_schedule(struct sock *sk, int size) } static inline bool -sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, unsigned int size) +sk_rmem_schedule(struct sock *sk, struct sk_buff *skb, int size) { if (!sk_has_account(sk)) return true; -- cgit v0.10.2 From 579035dc5ddd6d48fd8529e7358b03d911ab9d8a Mon Sep 17 00:00:00 2001 From: Andrew Vagin Date: Mon, 17 Sep 2012 14:09:12 -0700 Subject: pid-namespace: limit value of ns_last_pid to (0, max_pid) The kernel doesn't check the pid for negative values, so if you try to write -2 to /proc/sys/kernel/ns_last_pid, you will get a kernel panic. The crash happens because the next pid is -1, and alloc_pidmap() will try to access to a nonexistent pidmap. map = &pid_ns->pidmap[pid/BITS_PER_PAGE]; Signed-off-by: Andrew Vagin Acked-by: Cyrill Gorcunov Acked-by: Oleg Nesterov Cc: Eric W. Biederman Cc: Pavel Emelyanov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c index b3c7fd5..6144bab 100644 --- a/kernel/pid_namespace.c +++ b/kernel/pid_namespace.c @@ -232,15 +232,19 @@ static int pid_ns_ctl_handler(struct ctl_table *table, int write, */ tmp.data = ¤t->nsproxy->pid_ns->last_pid; - return proc_dointvec(&tmp, write, buffer, lenp, ppos); + return proc_dointvec_minmax(&tmp, write, buffer, lenp, ppos); } +extern int pid_max; +static int zero = 0; static struct ctl_table pid_ns_ctl_table[] = { { .procname = "ns_last_pid", .maxlen = sizeof(int), .mode = 0666, /* permissions are checked in the handler */ .proc_handler = pid_ns_ctl_handler, + .extra1 = &zero, + .extra2 = &pid_max, }, { } }; -- cgit v0.10.2 From 9a858dc7cebce01a7bb616bebb85087fa2b40871 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Mon, 17 Sep 2012 14:09:15 -0700 Subject: compiler.h: add __visible gcc 4.6+ has support for a externally_visible attribute that prevents the optimizer from optimizing unused symbols away. Add a __visible macro to use it with that compiler version or later. This is used (at least) by the "Link Time Optimization" patchset. Signed-off-by: Andi Kleen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/compiler-gcc4.h b/include/linux/compiler-gcc4.h index 2f40791..934bc34 100644 --- a/include/linux/compiler-gcc4.h +++ b/include/linux/compiler-gcc4.h @@ -49,6 +49,13 @@ #endif #endif +#if __GNUC_MINOR__ >= 6 +/* + * Tell the optimizer that something else uses this function or variable. + */ +#define __visible __attribute__((externally_visible)) +#endif + #if __GNUC_MINOR__ > 0 #define __compiletime_object_size(obj) __builtin_object_size(obj, 0) #endif diff --git a/include/linux/compiler.h b/include/linux/compiler.h index 923d093..f430e41 100644 --- a/include/linux/compiler.h +++ b/include/linux/compiler.h @@ -278,6 +278,10 @@ void ftrace_likely_update(struct ftrace_branch_data *f, int val, int expect); # define __section(S) __attribute__ ((__section__(#S))) #endif +#ifndef __visible +#define __visible +#endif + /* Are two types/vars the same type (ignoring qualifiers)? */ #ifndef __same_type # define __same_type(a, b) __builtin_types_compatible_p(typeof(a), typeof(b)) -- cgit v0.10.2 From 8dcebaa9a0ae8a0487f4342f3d56d2cb1c980860 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 17 Sep 2012 14:09:17 -0700 Subject: drivers/rtc/rtc-twl.c: ensure all interrupts are disabled during probe On some platforms, bootloaders are known to do some interesting RTC programming. Without going into the obscurities as to why this may be the case, suffice it to say the the driver should not make any assumptions about the state of the RTC when the driver loads. In particular, the driver probe should be sure that all interrupts are disabled until otherwise programmed. This was discovered when finding bursty I2C traffic every second on Overo platforms. This I2C overhead was keeping the SoC from hitting deep power states. The cause was found to be the RTC firing every second on the I2C-connected TWL PMIC. Special thanks to Felipe Balbi for suggesting to look for a rogue driver as the source of the I2C traffic rather than the I2C driver itself. Special thanks to Steve Sakoman for helping track down the source of the continuous RTC interrups on the Overo boards. Signed-off-by: Kevin Hilman Cc: Felipe Balbi Tested-by: Steve Sakoman Cc: Alessandro Zummo Tested-by: Shubhrajyoti Datta Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-twl.c b/drivers/rtc/rtc-twl.c index c5d06fe..9277d94 100644 --- a/drivers/rtc/rtc-twl.c +++ b/drivers/rtc/rtc-twl.c @@ -495,6 +495,11 @@ static int __devinit twl_rtc_probe(struct platform_device *pdev) if (ret < 0) goto out1; + /* ensure interrupts are disabled, bootloaders can be strange */ + ret = twl_rtc_write_u8(0, REG_RTC_INTERRUPTS_REG); + if (ret < 0) + dev_warn(&pdev->dev, "unable to disable interrupt\n"); + /* init cached IRQ enable bits */ ret = twl_rtc_read_u8(&rtc_irq_bits, REG_RTC_INTERRUPTS_REG); if (ret < 0) -- cgit v0.10.2 From 0ba8f2d59304dfe69b59c034de723ad80f7ab9ac Mon Sep 17 00:00:00 2001 From: Li Haifeng Date: Mon, 17 Sep 2012 14:09:21 -0700 Subject: mm/page_alloc: fix the page address of higher page's buddy calculation The heuristic method for buddy has been introduced since commit 43506fad21ca ("mm/page_alloc.c: simplify calculation of combined index of adjacent buddy lists"). But the page address of higher page's buddy was wrongly calculated, which will lead page_is_buddy to fail for ever. IOW, the heuristic method would be disabled with the wrong page address of higher page's buddy. Calculating the page address of higher page's buddy should be based higher_page with the offset between index of higher page and index of higher page's buddy. Signed-off-by: Haifeng Li Signed-off-by: Gavin Shan Reviewed-by: Michal Hocko Cc: KyongHo Cho Cc: Mel Gorman Cc: Minchan Kim Cc: Johannes Weiner Cc: [2.6.38+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index c66fb87..c13ea75 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -584,7 +584,7 @@ static inline void __free_one_page(struct page *page, combined_idx = buddy_idx & page_idx; higher_page = page + (combined_idx - page_idx); buddy_idx = __find_buddy_index(combined_idx, order + 1); - higher_buddy = page + (buddy_idx - combined_idx); + higher_buddy = higher_page + (buddy_idx - combined_idx); if (page_is_buddy(higher_page, higher_buddy, order + 1)) { list_add_tail(&page->lru, &zone->free_area[order].free_list[migratetype]); -- cgit v0.10.2 From f14851af0ebb32745c6c5a2e400aa0549f9d20df Mon Sep 17 00:00:00 2001 From: qiuxishi Date: Mon, 17 Sep 2012 14:09:24 -0700 Subject: memory hotplug: fix section info double registration bug There may be a bug when registering section info. For example, on my Itanium platform, the pfn range of node0 includes the other nodes, so other nodes' section info will be double registered, and memmap's page count will equal to 3. node0: start_pfn=0x100, spanned_pfn=0x20fb00, present_pfn=0x7f8a3, => 0x000100-0x20fc00 node1: start_pfn=0x80000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x080000-0x100000 node2: start_pfn=0x100000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x100000-0x180000 node3: start_pfn=0x180000, spanned_pfn=0x80000, present_pfn=0x80000, => 0x180000-0x200000 free_all_bootmem_node() register_page_bootmem_info_node() register_page_bootmem_info_section() When hot remove memory, we can't free the memmap's page because page_count() is 2 after put_page_bootmem(). sparse_remove_one_section() free_section_usemap() free_map_bootmem() put_page_bootmem() [akpm@linux-foundation.org: add code comment] Signed-off-by: Xishi Qiu Signed-off-by: Jiang Liu Acked-by: Mel Gorman Cc: "Luck, Tony" Cc: Yasuaki Ishimatsu Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 3ad25f9..6a5b90d 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -126,9 +126,6 @@ static void register_page_bootmem_info_section(unsigned long start_pfn) struct mem_section *ms; struct page *page, *memmap; - if (!pfn_valid(start_pfn)) - return; - section_nr = pfn_to_section_nr(start_pfn); ms = __nr_to_section(section_nr); @@ -187,9 +184,16 @@ void register_page_bootmem_info_node(struct pglist_data *pgdat) end_pfn = pfn + pgdat->node_spanned_pages; /* register_section info */ - for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) - register_page_bootmem_info_section(pfn); - + for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) { + /* + * Some platforms can assign the same pfn to multiple nodes - on + * node0 as well as nodeN. To avoid registering a pfn against + * multiple nodes we check that this pfn does not already + * reside in some other node. + */ + if (pfn_valid(pfn) && (pfn_to_nid(pfn) == node)) + register_page_bootmem_info_section(pfn); + } } #endif /* !CONFIG_SPARSEMEM_VMEMMAP */ -- cgit v0.10.2 From 960bd11bf2daf669d0d910428fd9ef5a15c3d7cb Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Mon, 17 Sep 2012 15:42:31 -0700 Subject: workqueue: always clear WORKER_REBIND in busy_worker_rebind_fn() busy_worker_rebind_fn() didn't clear WORKER_REBIND if rebinding failed (CPU is down again). This used to be okay because the flag wasn't used for anything else. However, after 25511a477 "workqueue: reimplement CPU online rebinding to handle idle workers", WORKER_REBIND is also used to command idle workers to rebind. If not cleared, the worker may confuse the next CPU_UP cycle by having REBIND spuriously set or oops / get stuck by prematurely calling idle_worker_rebind(). WARNING: at /work/os/wq/kernel/workqueue.c:1323 worker_thread+0x4cd/0x5 00() Hardware name: Bochs Modules linked in: test_wq(O-) Pid: 33, comm: kworker/1:1 Tainted: G O 3.6.0-rc1-work+ #3 Call Trace: [] warn_slowpath_common+0x7f/0xc0 [] warn_slowpath_null+0x1a/0x20 [] worker_thread+0x4cd/0x500 [] kthread+0xbe/0xd0 [] kernel_thread_helper+0x4/0x10 ---[ end trace e977cf20f4661968 ]--- BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] worker_thread+0x360/0x500 PGD 0 Oops: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: test_wq(O-) CPU 0 Pid: 33, comm: kworker/1:1 Tainted: G W O 3.6.0-rc1-work+ #3 Bochs Bochs RIP: 0010:[] [] worker_thread+0x360/0x500 RSP: 0018:ffff88001e1c9de0 EFLAGS: 00010086 RAX: 0000000000000000 RBX: ffff88001e633e00 RCX: 0000000000004140 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000009 RBP: ffff88001e1c9ea0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000002 R11: 0000000000000000 R12: ffff88001fc8d580 R13: ffff88001fc8d590 R14: ffff88001e633e20 R15: ffff88001e1c6900 FS: 0000000000000000(0000) GS:ffff88001fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 0000000000000000 CR3: 00000000130e8000 CR4: 00000000000006f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process kworker/1:1 (pid: 33, threadinfo ffff88001e1c8000, task ffff88001e1c6900) Stack: ffff880000000000 ffff88001e1c9e40 0000000000000001 ffff88001e1c8010 ffff88001e519c78 ffff88001e1c9e58 ffff88001e1c6900 ffff88001e1c6900 ffff88001e1c6900 ffff88001e1c6900 ffff88001fc8d340 ffff88001fc8d340 Call Trace: [] kthread+0xbe/0xd0 [] kernel_thread_helper+0x4/0x10 Code: b1 00 f6 43 48 02 0f 85 91 01 00 00 48 8b 43 38 48 89 df 48 8b 00 48 89 45 90 e8 ac f0 ff ff 3c 01 0f 85 60 01 00 00 48 8b 53 50 <8b> 02 83 e8 01 85 c0 89 02 0f 84 3b 01 00 00 48 8b 43 38 48 8b RIP [] worker_thread+0x360/0x500 RSP CR2: 0000000000000000 There was no reason to keep WORKER_REBIND on failure in the first place - WORKER_UNBOUND is guaranteed to be set in such cases preventing incorrectly activating concurrency management. Always clear WORKER_REBIND. tj: Updated comment and description. Signed-off-by: Lai Jiangshan Signed-off-by: Tejun Heo diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 1e1373b..b80065a 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1349,8 +1349,16 @@ static void busy_worker_rebind_fn(struct work_struct *work) struct worker *worker = container_of(work, struct worker, rebind_work); struct global_cwq *gcwq = worker->pool->gcwq; - if (worker_maybe_bind_and_lock(worker)) - worker_clr_flags(worker, WORKER_REBIND); + worker_maybe_bind_and_lock(worker); + + /* + * %WORKER_REBIND must be cleared even if the above binding failed; + * otherwise, we may confuse the next CPU_UP cycle or oops / get + * stuck by calling idle_worker_rebind() prematurely. If CPU went + * down again inbetween, %WORKER_UNBOUND would be set, so clearing + * %WORKER_REBIND is always safe. + */ + worker_clr_flags(worker, WORKER_REBIND); spin_unlock_irq(&gcwq->lock); } -- cgit v0.10.2 From d6838a62b4d36d3e2791cffe155586973b20a381 Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Tue, 18 Sep 2012 10:05:34 +0900 Subject: ARM: SAMSUNG: Use spin_lock_{irqsave,irqrestore} in clk_set_rate The spinlock clocks_lock can be held during ISR, hence it is not safe to hold that lock with disabling interrupts. It fixes following potential deadlock. ========================================================= [ INFO: possible irq lock inversion dependency detected ] 3.6.0-rc4+ #2 Not tainted --------------------------------------------------------- swapper/0/1 just changed the state of lock: (&(&host->lock)->rlock){-.....}, at: [] sdhci_irq+0x15/0x564 but this lock took another, HARDIRQ-unsafe lock in the past: (clocks_lock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(clocks_lock); local_irq_disable(); lock(&(&host->lock)->rlock); lock(clocks_lock); lock(&(&host->lock)->rlock); *** DEADLOCK *** Signed-off-by: Tushar Behera Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-samsung/clock.c b/arch/arm/plat-samsung/clock.c index 80eacca..d1116e2 100644 --- a/arch/arm/plat-samsung/clock.c +++ b/arch/arm/plat-samsung/clock.c @@ -144,6 +144,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate) int clk_set_rate(struct clk *clk, unsigned long rate) { + unsigned long flags; int ret; if (IS_ERR(clk)) @@ -159,9 +160,9 @@ int clk_set_rate(struct clk *clk, unsigned long rate) if (clk->ops == NULL || clk->ops->set_rate == NULL) return -EINVAL; - spin_lock(&clocks_lock); + spin_lock_irqsave(&clocks_lock, flags); ret = (clk->ops->set_rate)(clk, rate); - spin_unlock(&clocks_lock); + spin_unlock_irqrestore(&clocks_lock, flags); return ret; } -- cgit v0.10.2 From a704835d6a7a8254067a1be60d614cd5c0c73e44 Mon Sep 17 00:00:00 2001 From: Tetsuyuki Kobayashi Date: Thu, 6 Sep 2012 07:19:36 +0000 Subject: ARM: shmobile: kzm9g: bugfix: correct mmcif interrupt settings Correct interrupt settings of sh_mmc:int and sh_mmc:error in board-kzm9g.c. Signed-off-by: Tetsuyuki Kobayashi Acked-by: Kuninori Morimoto Signed-off-by: Simon Horman diff --git a/arch/arm/mach-shmobile/board-kzm9g.c b/arch/arm/mach-shmobile/board-kzm9g.c index 53b7ea9..3b8a017 100644 --- a/arch/arm/mach-shmobile/board-kzm9g.c +++ b/arch/arm/mach-shmobile/board-kzm9g.c @@ -346,11 +346,11 @@ static struct resource sh_mmcif_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = gic_spi(141), + .start = gic_spi(140), .flags = IORESOURCE_IRQ, }, [2] = { - .start = gic_spi(140), + .start = gic_spi(141), .flags = IORESOURCE_IRQ, }, }; -- cgit v0.10.2 From 2e2c682becb20416c140aa0d6d3137b51a5c76da Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 17 Sep 2012 15:20:22 +0530 Subject: DMA: PL330: Fix potential NULL pointer dereference in pl330_submit_req() 'r->cfg' is being checked for NULL. However, it is dereferenced in the previous statements. Thus moving those statements within the check. Signed-off-by: Sachin Kamat Acked-by: Jassi Brar Cc: Stable Signed-off-by: Vinod Koul diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index e4feba6..a3b26ad 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -1567,17 +1567,19 @@ static int pl330_submit_req(void *ch_id, struct pl330_req *r) goto xfer_exit; } - /* Prefer Secure Channel */ - if (!_manager_ns(thrd)) - r->cfg->nonsecure = 0; - else - r->cfg->nonsecure = 1; /* Use last settings, if not provided */ - if (r->cfg) + if (r->cfg) { + /* Prefer Secure Channel */ + if (!_manager_ns(thrd)) + r->cfg->nonsecure = 0; + else + r->cfg->nonsecure = 1; + ccr = _prepare_ccr(r->cfg); - else + } else { ccr = readl(regs + CC(thrd->id)); + } /* If this req doesn't have valid xfer settings */ if (!_is_valid(ccr)) { -- cgit v0.10.2 From 61c6e7531d3b66b33187b8cdd700fd8ab93ffd62 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 17 Sep 2012 15:20:23 +0530 Subject: DMA: PL330: Check the pointer returned by kzalloc kzalloc could return NULL. Hence add a check to avoid NULL pointer dereference. Signed-off-by: Sachin Kamat Acked-by: Jassi Brar Cc: Stable Signed-off-by: Vinod Koul diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index a3b26ad..f5843bc 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -2930,6 +2930,11 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) num_chan = max_t(int, pi->pcfg.num_peri, pi->pcfg.num_chan); pdmac->peripherals = kzalloc(num_chan * sizeof(*pch), GFP_KERNEL); + if (!pdmac->peripherals) { + ret = -ENOMEM; + dev_err(&adev->dev, "unable to allocate pdmac->peripherals\n"); + goto probe_err5; + } for (i = 0; i < num_chan; i++) { pch = &pdmac->peripherals[i]; -- cgit v0.10.2 From 077664a2644ff6fa0fb1a0c15be96fed359d09f4 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 14 Sep 2012 20:25:48 +0200 Subject: sh: pfc: Release spinlock in sh_pfc_gpio_request_enable() error path The sh_pfc_gpio_request_enable() function acquires a spinlock but fails to release it before returning if the requested mux type is not supported. Fix this. Signed-off-by: Laurent Pinchart Signed-off-by: Paul Mundt diff --git a/drivers/sh/pfc/pinctrl.c b/drivers/sh/pfc/pinctrl.c index 2804eaa..a3ac39b 100644 --- a/drivers/sh/pfc/pinctrl.c +++ b/drivers/sh/pfc/pinctrl.c @@ -211,7 +211,8 @@ static int sh_pfc_gpio_request_enable(struct pinctrl_dev *pctldev, break; default: pr_err("Unsupported mux type (%d), bailing...\n", pinmux_type); - return -ENOTSUPP; + ret = -ENOTSUPP; + goto err; } ret = 0; -- cgit v0.10.2 From 5e071e2b4b82599f07cce5e1d2d272feb462950c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 18 Sep 2012 17:04:37 +0900 Subject: sh: Fix up TIF_NOTIFY_RESUME sans TIF_SIGPENDING handling. As Al notes, we missed a TIF_NOTIFY_RESUME check which caused any handlers without TIF_SIGPENDING also set to skip the notification: Looks like while it is in the relevant masks *and* checked in do_notify_resume() both on 32bit and 64bit variants since commit ab99c733ae73cce31f2a2434f7099564e5a73d95 ("sh: Make syscall tracer use tracehook notifiers, add TIF_NOTIFY_RESUME.") they are actually *not* reached without simulataneous SIGPENDING, since the actual glue in the callers had not been updated back then and still checks for _TIF_SIGPENDING alone when deciding whether to hit do_notify_resume() or not. Reported-by: Nobuhiro Iwamatsu Signed-off-by: Al Viro Tested-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh5/entry.S b/arch/sh/kernel/cpu/sh5/entry.S index b7cf6a5..7e605b9 100644 --- a/arch/sh/kernel/cpu/sh5/entry.S +++ b/arch/sh/kernel/cpu/sh5/entry.S @@ -933,7 +933,7 @@ ret_with_reschedule: pta restore_all, tr1 - movi _TIF_SIGPENDING, r8 + movi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8 and r8, r7, r8 pta work_notifysig, tr0 bne r8, ZERO, tr0 diff --git a/arch/sh/kernel/entry-common.S b/arch/sh/kernel/entry-common.S index f67601c..b96489d 100644 --- a/arch/sh/kernel/entry-common.S +++ b/arch/sh/kernel/entry-common.S @@ -139,7 +139,7 @@ work_pending: ! r8: current_thread_info ! t: result of "tst #_TIF_NEED_RESCHED, r0" bf/s work_resched - tst #_TIF_SIGPENDING, r0 + tst #(_TIF_SIGPENDING | _TIF_NOTIFY_RESUME), r0 work_notifysig: bt/s __restore_all mov r15, r4 -- cgit v0.10.2 From 2bd6efad25d7c1950008e2ab4e2d6796001919fc Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 17 Sep 2012 11:47:13 +0100 Subject: blk: add an upper sanity check on partition adding 65536 should be ludicrous anyway but without it we overflow the memory computation doing the allocation and badness occurs. Signed-off-by: Alan Cox Signed-off-by: Jens Axboe diff --git a/block/ioctl.c b/block/ioctl.c index 4476e0e8..4a85096 100644 --- a/block/ioctl.c +++ b/block/ioctl.c @@ -41,7 +41,7 @@ static int blkpg_ioctl(struct block_device *bdev, struct blkpg_ioctl_arg __user sizeof(long long) > sizeof(long)) { long pstart = start, plength = length; if (pstart != start || plength != length - || pstart < 0 || plength < 0) + || pstart < 0 || plength < 0 || partno > 65535) return -EINVAL; } -- cgit v0.10.2 From 2453f5f992717251cfadab6184fbb3ec2f2e8b40 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 14 Sep 2012 16:35:10 -0500 Subject: cciss: fix handling of protocol error If a command completes with a status of CMD_PROTOCOL_ERR, this information should be conveyed to the SCSI mid layer, not dropped on the floor. Unlike a similar bug in the hpsa driver, this bug only affects tape drives and CD and DVD ROM drives in the cciss driver, and to induce it, you have to disconnect (or damage) a cable, so it is not a very likely scenario (which would explain why the bug has gone undetected for the last 10 years.) Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe diff --git a/drivers/block/cciss_scsi.c b/drivers/block/cciss_scsi.c index 38aa6dd..da33111 100644 --- a/drivers/block/cciss_scsi.c +++ b/drivers/block/cciss_scsi.c @@ -795,6 +795,7 @@ static void complete_scsi_command(CommandList_struct *c, int timeout, } break; case CMD_PROTOCOL_ERR: + cmd->result = DID_ERROR << 16; dev_warn(&h->pdev->dev, "%p has protocol error\n", c); break; -- cgit v0.10.2 From 256d0eaac87da1e993190846064f339f4c7a63f5 Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 14 Sep 2012 16:34:25 -0500 Subject: [SCSI] hpsa: fix handling of protocol error If a command status of CMD_PROTOCOL_ERR is received, this information should be conveyed to the SCSI mid layer, not dropped on the floor. CMD_PROTOCOL_ERR may be received from the Smart Array for any commands destined for an external RAID controller such as a P2000, or commands destined for tape drives or CD/DVD-ROM drives, if for instance a cable is disconnected. This mostly affects multipath configurations, as disconnecting a cable on a non-multipath configuration is not going to do anything good regardless of whether CMD_PROTOCOL_ERR is handled correctly or not. Not handling CMD_PROTOCOL_ERR correctly in a multipath configaration involving external RAID controllers may cause data corruption, so this is quite a serious bug. This bug should not normally cause a problem for direct attached disk storage. Signed-off-by: Stephen M. Cameron Cc: stable@vger.kernel.org Signed-off-by: James Bottomley diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 796482b..2b4261c 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -1315,8 +1315,9 @@ static void complete_scsi_command(struct CommandList *cp) } break; case CMD_PROTOCOL_ERR: + cmd->result = DID_ERROR << 16; dev_warn(&h->pdev->dev, "cp %p has " - "protocol error \n", cp); + "protocol error\n", cp); break; case CMD_HARDWARE_ERR: cmd->result = DID_ERROR << 16; -- cgit v0.10.2 From 35495173e1df621dff0e9a244accbe32cd28a98f Mon Sep 17 00:00:00 2001 From: Fabio Estevam Date: Sun, 16 Sep 2012 22:28:35 -0300 Subject: ARM: imx: armadillo5x0: Fix illegal register access Since commit eb92044eb (ARM i.MX3: Make ccm base address a variable ) it is necessary to pass the CCM register base as a variable. Fix the CCM register access in mach-armadillo5x0 by passing mx3_ccm_base and avoid illegal accesses. Also applies to v3.5 Reported-by: Arnd Bergmann Signed-off-by: Fabio Estevam Acked-by: Arnd Bergmann Signed-off-by: Sascha Hauer Cc: stable@vger.kernel.org diff --git a/arch/arm/mach-imx/mach-armadillo5x0.c b/arch/arm/mach-imx/mach-armadillo5x0.c index 2c6ab32..5985ed1 100644 --- a/arch/arm/mach-imx/mach-armadillo5x0.c +++ b/arch/arm/mach-imx/mach-armadillo5x0.c @@ -526,7 +526,8 @@ static void __init armadillo5x0_init(void) imx31_add_mxc_nand(&armadillo5x0_nand_board_info); /* set NAND page size to 2k if not configured via boot mode pins */ - __raw_writel(__raw_readl(MXC_CCM_RCSR) | (1 << 30), MXC_CCM_RCSR); + __raw_writel(__raw_readl(mx3_ccm_base + MXC_CCM_RCSR) | + (1 << 30), mx3_ccm_base + MXC_CCM_RCSR); /* RTC */ /* Get RTC IRQ and register the chip */ -- cgit v0.10.2 From 42a3f891caee0d9baa60a6964e41a28b9c657407 Mon Sep 17 00:00:00 2001 From: Sascha Hauer Date: Tue, 18 Sep 2012 10:05:31 +0200 Subject: ARM i.MX25: Make timer irq work again Since i.MX has SPARSE_IRQ enabled the i.MX25 timer is broken. This is because the internal irqs now start at an offset of NR_IRQS_LEGACY. The patch fixed this up, but missed the i.MX25 timer which used a hardcoded value instead of a define. This patch introduces a define for the timer irq and uses it. This is broken since introduced with 3.6-rc1: | commit 8842a9e2869cae14bbb8184004a42fc3070587fb | Author: Shawn Guo | Date: Thu Jun 14 11:16:14 2012 +0800 | | ARM: imx: enable SPARSE_IRQ for imx platform Signed-off-by: Sascha Hauer Acked-by: Shawn Guo diff --git a/arch/arm/mach-imx/clk-imx25.c b/arch/arm/mach-imx/clk-imx25.c index 4431a62..d20d479 100644 --- a/arch/arm/mach-imx/clk-imx25.c +++ b/arch/arm/mach-imx/clk-imx25.c @@ -241,6 +241,6 @@ int __init mx25_clocks_init(void) clk_register_clkdev(clk[sdma_ahb], "ahb", "imx35-sdma"); clk_register_clkdev(clk[iim_ipg], "iim", NULL); - mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), 54); + mxc_timer_init(MX25_IO_ADDRESS(MX25_GPT1_BASE_ADDR), MX25_INT_GPT1); return 0; } diff --git a/arch/arm/plat-mxc/include/mach/mx25.h b/arch/arm/plat-mxc/include/mach/mx25.h index 627d94f..ec46640 100644 --- a/arch/arm/plat-mxc/include/mach/mx25.h +++ b/arch/arm/plat-mxc/include/mach/mx25.h @@ -98,6 +98,7 @@ #define MX25_INT_UART1 (NR_IRQS_LEGACY + 45) #define MX25_INT_GPIO2 (NR_IRQS_LEGACY + 51) #define MX25_INT_GPIO1 (NR_IRQS_LEGACY + 52) +#define MX25_INT_GPT1 (NR_IRQS_LEGACY + 54) #define MX25_INT_FEC (NR_IRQS_LEGACY + 57) #define MX25_DMA_REQ_SSI2_RX1 22 -- cgit v0.10.2 From b161dfa6937ae46d50adce8a7c6b12233e96e7bd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 17 Sep 2012 22:31:38 +0200 Subject: vfs: dcache: use DCACHE_DENTRY_KILLED instead of DCACHE_DISCONNECTED in d_kill() IBM reported a soft lockup after applying the fix for the rename_lock deadlock. Commit c83ce989cb5f ("VFS: Fix the nfs sillyrename regression in kernel 2.6.38") was found to be the culprit. The nfs sillyrename fix used DCACHE_DISCONNECTED to indicate that the dentry was killed. This flag can be set on non-killed dentries too, which results in infinite retries when trying to traverse the dentry tree. This patch introduces a separate flag: DCACHE_DENTRY_KILLED, which is only set in d_kill() and makes try_to_ascend() test only this flag. IBM reported successful test results with this patch. Signed-off-by: Miklos Szeredi Cc: Trond Myklebust Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/fs/dcache.c b/fs/dcache.c index 8086636..16521a9 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -389,7 +389,7 @@ static struct dentry *d_kill(struct dentry *dentry, struct dentry *parent) * Inform try_to_ascend() that we are no longer attached to the * dentry tree */ - dentry->d_flags |= DCACHE_DISCONNECTED; + dentry->d_flags |= DCACHE_DENTRY_KILLED; if (parent) spin_unlock(&parent->d_lock); dentry_iput(dentry); @@ -1048,7 +1048,7 @@ static struct dentry *try_to_ascend(struct dentry *old, int locked, unsigned seq * or deletion */ if (new != old->d_parent || - (old->d_flags & DCACHE_DISCONNECTED) || + (old->d_flags & DCACHE_DENTRY_KILLED) || (!locked && read_seqretry(&rename_lock, seq))) { spin_unlock(&new->d_lock); new = NULL; diff --git a/include/linux/dcache.h b/include/linux/dcache.h index caa34e5..5920079 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -206,6 +206,8 @@ struct dentry_operations { #define DCACHE_MANAGED_DENTRY \ (DCACHE_MOUNTED|DCACHE_NEED_AUTOMOUNT|DCACHE_MANAGE_TRANSIT) +#define DCACHE_DENTRY_KILLED 0x100000 + extern seqlock_t rename_lock; static inline int dname_external(struct dentry *dentry) -- cgit v0.10.2 From bafa6d9d89072c1a18853afe9ee5de05c491c13a Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Fri, 7 Sep 2012 00:45:29 +0000 Subject: ipv4/route: arg delay is useless in rt_cache_flush() Since route cache deletion (89aef8921bfbac22f), delay is no more used. Remove it. Signed-off-by: Nicolas Dichtel Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/net/route.h b/include/net/route.h index 776a27f..da22243 100644 --- a/include/net/route.h +++ b/include/net/route.h @@ -108,7 +108,7 @@ extern struct ip_rt_acct __percpu *ip_rt_acct; struct in_device; extern int ip_rt_init(void); -extern void rt_cache_flush(struct net *net, int how); +extern void rt_cache_flush(struct net *net); extern void rt_flush_dev(struct net_device *dev); extern struct rtable *__ip_route_output_key(struct net *, struct flowi4 *flp); extern struct rtable *ip_route_output_flow(struct net *, struct flowi4 *flp, diff --git a/net/ipv4/arp.c b/net/ipv4/arp.c index 77e87af..4780045 100644 --- a/net/ipv4/arp.c +++ b/net/ipv4/arp.c @@ -1225,7 +1225,7 @@ static int arp_netdev_event(struct notifier_block *this, unsigned long event, switch (event) { case NETDEV_CHANGEADDR: neigh_changeaddr(&arp_tbl, dev); - rt_cache_flush(dev_net(dev), 0); + rt_cache_flush(dev_net(dev)); break; default: break; diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 44bf82e..9b55b6f 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -1503,7 +1503,7 @@ static int devinet_conf_proc(ctl_table *ctl, int write, if (i == IPV4_DEVCONF_ACCEPT_LOCAL - 1 || i == IPV4_DEVCONF_ROUTE_LOCALNET - 1) if ((new_value == 0) && (old_value != 0)) - rt_cache_flush(net, 0); + rt_cache_flush(net); } return ret; @@ -1537,7 +1537,7 @@ static int devinet_sysctl_forward(ctl_table *ctl, int write, dev_disable_lro(idev->dev); } rtnl_unlock(); - rt_cache_flush(net, 0); + rt_cache_flush(net); } } @@ -1554,7 +1554,7 @@ static int ipv4_doint_and_flush(ctl_table *ctl, int write, struct net *net = ctl->extra2; if (write && *valp != val) - rt_cache_flush(net, 0); + rt_cache_flush(net); return ret; } diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index c43ae3f..8e2b475 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -148,7 +148,7 @@ static void fib_flush(struct net *net) } if (flushed) - rt_cache_flush(net, -1); + rt_cache_flush(net); } /* @@ -999,11 +999,11 @@ static void nl_fib_lookup_exit(struct net *net) net->ipv4.fibnl = NULL; } -static void fib_disable_ip(struct net_device *dev, int force, int delay) +static void fib_disable_ip(struct net_device *dev, int force) { if (fib_sync_down_dev(dev, force)) fib_flush(dev_net(dev)); - rt_cache_flush(dev_net(dev), delay); + rt_cache_flush(dev_net(dev)); arp_ifdown(dev); } @@ -1020,7 +1020,7 @@ static int fib_inetaddr_event(struct notifier_block *this, unsigned long event, fib_sync_up(dev); #endif atomic_inc(&net->ipv4.dev_addr_genid); - rt_cache_flush(dev_net(dev), -1); + rt_cache_flush(dev_net(dev)); break; case NETDEV_DOWN: fib_del_ifaddr(ifa, NULL); @@ -1029,9 +1029,9 @@ static int fib_inetaddr_event(struct notifier_block *this, unsigned long event, /* Last address was deleted from this interface. * Disable IP. */ - fib_disable_ip(dev, 1, 0); + fib_disable_ip(dev, 1); } else { - rt_cache_flush(dev_net(dev), -1); + rt_cache_flush(dev_net(dev)); } break; } @@ -1045,7 +1045,7 @@ static int fib_netdev_event(struct notifier_block *this, unsigned long event, vo struct net *net = dev_net(dev); if (event == NETDEV_UNREGISTER) { - fib_disable_ip(dev, 2, -1); + fib_disable_ip(dev, 2); rt_flush_dev(dev); return NOTIFY_DONE; } @@ -1062,14 +1062,14 @@ static int fib_netdev_event(struct notifier_block *this, unsigned long event, vo fib_sync_up(dev); #endif atomic_inc(&net->ipv4.dev_addr_genid); - rt_cache_flush(dev_net(dev), -1); + rt_cache_flush(dev_net(dev)); break; case NETDEV_DOWN: - fib_disable_ip(dev, 0, 0); + fib_disable_ip(dev, 0); break; case NETDEV_CHANGEMTU: case NETDEV_CHANGE: - rt_cache_flush(dev_net(dev), 0); + rt_cache_flush(dev_net(dev)); break; case NETDEV_UNREGISTER_BATCH: break; diff --git a/net/ipv4/fib_rules.c b/net/ipv4/fib_rules.c index a83d74e..274309d 100644 --- a/net/ipv4/fib_rules.c +++ b/net/ipv4/fib_rules.c @@ -259,7 +259,7 @@ static size_t fib4_rule_nlmsg_payload(struct fib_rule *rule) static void fib4_rule_flush_cache(struct fib_rules_ops *ops) { - rt_cache_flush(ops->fro_net, -1); + rt_cache_flush(ops->fro_net); } static const struct fib_rules_ops __net_initdata fib4_rules_ops_template = { diff --git a/net/ipv4/fib_trie.c b/net/ipv4/fib_trie.c index 57bd978..d1b9359 100644 --- a/net/ipv4/fib_trie.c +++ b/net/ipv4/fib_trie.c @@ -1286,7 +1286,7 @@ int fib_table_insert(struct fib_table *tb, struct fib_config *cfg) fib_release_info(fi_drop); if (state & FA_S_ACCESSED) - rt_cache_flush(cfg->fc_nlinfo.nl_net, -1); + rt_cache_flush(cfg->fc_nlinfo.nl_net); rtmsg_fib(RTM_NEWROUTE, htonl(key), new_fa, plen, tb->tb_id, &cfg->fc_nlinfo, NLM_F_REPLACE); @@ -1333,7 +1333,7 @@ int fib_table_insert(struct fib_table *tb, struct fib_config *cfg) list_add_tail_rcu(&new_fa->fa_list, (fa ? &fa->fa_list : fa_head)); - rt_cache_flush(cfg->fc_nlinfo.nl_net, -1); + rt_cache_flush(cfg->fc_nlinfo.nl_net); rtmsg_fib(RTM_NEWROUTE, htonl(key), new_fa, plen, tb->tb_id, &cfg->fc_nlinfo, 0); succeeded: @@ -1708,7 +1708,7 @@ int fib_table_delete(struct fib_table *tb, struct fib_config *cfg) trie_leaf_remove(t, l); if (fa->fa_state & FA_S_ACCESSED) - rt_cache_flush(cfg->fc_nlinfo.nl_net, -1); + rt_cache_flush(cfg->fc_nlinfo.nl_net); fib_release_info(fa->fa_info); alias_free_mem_rcu(fa); diff --git a/net/ipv4/route.c b/net/ipv4/route.c index 82cf2a7..f6436d3 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -461,11 +461,7 @@ static void rt_cache_invalidate(struct net *net) atomic_add(shuffle + 1U, &net->ipv4.rt_genid); } -/* - * delay < 0 : invalidate cache (fast : entries will be deleted later) - * delay >= 0 : invalidate & flush cache (can be long) - */ -void rt_cache_flush(struct net *net, int delay) +void rt_cache_flush(struct net *net) { rt_cache_invalidate(net); } @@ -2345,7 +2341,7 @@ int ip_rt_dump(struct sk_buff *skb, struct netlink_callback *cb) void ip_rt_multicast_event(struct in_device *in_dev) { - rt_cache_flush(dev_net(in_dev->dev), 0); + rt_cache_flush(dev_net(in_dev->dev)); } #ifdef CONFIG_SYSCTL @@ -2354,16 +2350,7 @@ static int ipv4_sysctl_rtcache_flush(ctl_table *__ctl, int write, size_t *lenp, loff_t *ppos) { if (write) { - int flush_delay; - ctl_table ctl; - struct net *net; - - memcpy(&ctl, __ctl, sizeof(ctl)); - ctl.data = &flush_delay; - proc_dointvec(&ctl, write, buffer, lenp, ppos); - - net = (struct net *)__ctl->extra1; - rt_cache_flush(net, flush_delay); + rt_cache_flush((struct net *)__ctl->extra1); return 0; } -- cgit v0.10.2 From 2885da72966fcb89f48d554339d347fb02b5ea78 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 7 Sep 2012 22:27:11 +0200 Subject: net: rt_cache_flush() cleanup We dont use jhash anymore since route cache removal, so we can get rid of get_random_bytes() calls for rt_genid changes. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/route.c b/net/ipv4/route.c index f6436d3..be27cfa9 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -447,23 +447,9 @@ static inline bool rt_is_expired(const struct rtable *rth) return rth->rt_genid != rt_genid(dev_net(rth->dst.dev)); } -/* - * Perturbation of rt_genid by a small quantity [1..256] - * Using 8 bits of shuffling ensure we can call rt_cache_invalidate() - * many times (2^24) without giving recent rt_genid. - * Jenkins hash is strong enough that litle changes of rt_genid are OK. - */ -static void rt_cache_invalidate(struct net *net) -{ - unsigned char shuffle; - - get_random_bytes(&shuffle, sizeof(shuffle)); - atomic_add(shuffle + 1U, &net->ipv4.rt_genid); -} - void rt_cache_flush(struct net *net) { - rt_cache_invalidate(net); + atomic_inc(&net->ipv4.rt_genid); } static struct neighbour *ipv4_neigh_lookup(const struct dst_entry *dst, @@ -2520,8 +2506,7 @@ static __net_initdata struct pernet_operations sysctl_route_ops = { static __net_init int rt_genid_init(struct net *net) { - get_random_bytes(&net->ipv4.rt_genid, - sizeof(net->ipv4.rt_genid)); + atomic_set(&net->ipv4.rt_genid, 0); get_random_bytes(&net->ipv4.dev_addr_genid, sizeof(net->ipv4.dev_addr_genid)); return 0; -- cgit v0.10.2 From b42664f898c976247f7f609b8bb9c94d7475ca10 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:44 +0000 Subject: netns: move net->ipv4.rt_genid to net->rt_genid This commit prepares the use of rt_genid by both IPv4 and IPv6. Initialization is left in IPv4 part. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index ae1cd6c..fd87963 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -102,6 +102,7 @@ struct net { #endif struct netns_ipvs *ipvs; struct sock *diag_nlsk; + atomic_t rt_genid; }; @@ -300,5 +301,14 @@ static inline void unregister_net_sysctl_table(struct ctl_table_header *header) } #endif +static inline int rt_genid(struct net *net) +{ + return atomic_read(&net->rt_genid); +} + +static inline void rt_genid_bump(struct net *net) +{ + atomic_inc(&net->rt_genid); +} #endif /* __NET_NET_NAMESPACE_H */ diff --git a/include/net/netns/ipv4.h b/include/net/netns/ipv4.h index 1474dd6..eb24dbc 100644 --- a/include/net/netns/ipv4.h +++ b/include/net/netns/ipv4.h @@ -65,7 +65,6 @@ struct netns_ipv4 { unsigned int sysctl_ping_group_range[2]; long sysctl_tcp_mem[3]; - atomic_t rt_genid; atomic_t dev_addr_genid; #ifdef CONFIG_IP_MROUTE diff --git a/net/ipv4/route.c b/net/ipv4/route.c index be27cfa9..fd9af60 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -202,11 +202,6 @@ EXPORT_SYMBOL(ip_tos2prio); static DEFINE_PER_CPU(struct rt_cache_stat, rt_cache_stat); #define RT_CACHE_STAT_INC(field) __this_cpu_inc(rt_cache_stat.field) -static inline int rt_genid(struct net *net) -{ - return atomic_read(&net->ipv4.rt_genid); -} - #ifdef CONFIG_PROC_FS static void *rt_cache_seq_start(struct seq_file *seq, loff_t *pos) { @@ -449,7 +444,7 @@ static inline bool rt_is_expired(const struct rtable *rth) void rt_cache_flush(struct net *net) { - atomic_inc(&net->ipv4.rt_genid); + rt_genid_bump(net); } static struct neighbour *ipv4_neigh_lookup(const struct dst_entry *dst, @@ -2506,7 +2501,7 @@ static __net_initdata struct pernet_operations sysctl_route_ops = { static __net_init int rt_genid_init(struct net *net) { - atomic_set(&net->ipv4.rt_genid, 0); + atomic_set(&net->rt_genid, 0); get_random_bytes(&net->ipv4.dev_addr_genid, sizeof(net->ipv4.dev_addr_genid)); return 0; -- cgit v0.10.2 From ee8372dd1989287c5eedb69d44bac43f69e496f1 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:45 +0000 Subject: xfrm: invalidate dst on policy insertion/deletion When a policy is inserted or deleted, all dst should be recalculated. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index 5a2aa17..ab2ce7d 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -585,6 +585,7 @@ int xfrm_policy_insert(int dir, struct xfrm_policy *policy, int excl) xfrm_pol_hold(policy); net->xfrm.policy_count[dir]++; atomic_inc(&flow_cache_genid); + rt_genid_bump(net); if (delpol) __xfrm_policy_unlink(delpol, dir); policy->index = delpol ? delpol->index : xfrm_gen_index(net, dir); diff --git a/security/selinux/include/xfrm.h b/security/selinux/include/xfrm.h index c220f31..65f67cb 100644 --- a/security/selinux/include/xfrm.h +++ b/security/selinux/include/xfrm.h @@ -51,6 +51,7 @@ int selinux_xfrm_decode_session(struct sk_buff *skb, u32 *sid, int ckall); static inline void selinux_xfrm_notify_policyload(void) { atomic_inc(&flow_cache_genid); + rt_genid_bump(&init_net); } #else static inline int selinux_xfrm_enabled(void) -- cgit v0.10.2 From 6f3118b571b8a4c06c7985dc3172c3526cb86253 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:46 +0000 Subject: ipv6: use net->rt_genid to check dst validity IPv6 dst should take care of rt_genid too. When a xfrm policy is inserted or deleted, all dst should be invalidated. To force the validation, dst entries should be created with ->obsolete set to DST_OBSOLETE_FORCE_CHK. This was already the case for all functions calling ip6_dst_alloc(), except for ip6_rt_copy(). As a consequence, we can remove the specific code in inet6_connection_sock. Signed-off-by: Nicolas Dichtel Signed-off-by: David S. Miller diff --git a/include/net/ip6_fib.h b/include/net/ip6_fib.h index 0fedbd8..9fc7114 100644 --- a/include/net/ip6_fib.h +++ b/include/net/ip6_fib.h @@ -111,9 +111,8 @@ struct rt6_info { struct inet6_dev *rt6i_idev; unsigned long _rt6i_peer; -#ifdef CONFIG_XFRM - u32 rt6i_flow_cache_genid; -#endif + u32 rt6i_genid; + /* more non-fragment space at head required */ unsigned short rt6i_nfheader_len; diff --git a/net/ipv6/inet6_connection_sock.c b/net/ipv6/inet6_connection_sock.c index 0251a60..c4f9341 100644 --- a/net/ipv6/inet6_connection_sock.c +++ b/net/ipv6/inet6_connection_sock.c @@ -175,33 +175,12 @@ void __inet6_csk_dst_store(struct sock *sk, struct dst_entry *dst, const struct in6_addr *saddr) { __ip6_dst_store(sk, dst, daddr, saddr); - -#ifdef CONFIG_XFRM - { - struct rt6_info *rt = (struct rt6_info *)dst; - rt->rt6i_flow_cache_genid = atomic_read(&flow_cache_genid); - } -#endif } static inline struct dst_entry *__inet6_csk_dst_check(struct sock *sk, u32 cookie) { - struct dst_entry *dst; - - dst = __sk_dst_check(sk, cookie); - -#ifdef CONFIG_XFRM - if (dst) { - struct rt6_info *rt = (struct rt6_info *)dst; - if (rt->rt6i_flow_cache_genid != atomic_read(&flow_cache_genid)) { - __sk_dst_reset(sk); - dst = NULL; - } - } -#endif - - return dst; + return __sk_dst_check(sk, cookie); } static struct dst_entry *inet6_csk_route_socket(struct sock *sk, diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 8e80fd2..fb29e22 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -281,13 +281,14 @@ static inline struct rt6_info *ip6_dst_alloc(struct net *net, struct fib6_table *table) { struct rt6_info *rt = dst_alloc(&net->ipv6.ip6_dst_ops, dev, - 0, DST_OBSOLETE_NONE, flags); + 0, DST_OBSOLETE_FORCE_CHK, flags); if (rt) { struct dst_entry *dst = &rt->dst; memset(dst + 1, 0, sizeof(*rt) - sizeof(*dst)); rt6_init_peer(rt, table ? &table->tb6_peers : net->ipv6.peers); + rt->rt6i_genid = rt_genid(net); } return rt; } @@ -1031,6 +1032,13 @@ static struct dst_entry *ip6_dst_check(struct dst_entry *dst, u32 cookie) rt = (struct rt6_info *) dst; + /* All IPV6 dsts are created with ->obsolete set to the value + * DST_OBSOLETE_FORCE_CHK which forces validation calls down + * into this function always. + */ + if (rt->rt6i_genid != rt_genid(dev_net(rt->dst.dev))) + return NULL; + if (rt->rt6i_node && (rt->rt6i_node->fn_sernum == cookie)) { if (rt->rt6i_peer_genid != rt6_peer_genid()) { if (!rt6_has_peer(rt)) @@ -1397,8 +1405,6 @@ int ip6_route_add(struct fib6_config *cfg) goto out; } - rt->dst.obsolete = -1; - if (cfg->fc_flags & RTF_EXPIRES) rt6_set_expires(rt, jiffies + clock_t_to_jiffies(cfg->fc_expires)); @@ -2080,7 +2086,6 @@ struct rt6_info *addrconf_dst_alloc(struct inet6_dev *idev, rt->dst.input = ip6_input; rt->dst.output = ip6_output; rt->rt6i_idev = idev; - rt->dst.obsolete = -1; rt->rt6i_flags = RTF_UP | RTF_NONEXTHOP; if (anycast) -- cgit v0.10.2 From 2c20cbd7e3aa6e9dddc07975d3f3a89fe1f69c00 Mon Sep 17 00:00:00 2001 From: Nicolas Dichtel Date: Mon, 10 Sep 2012 22:09:47 +0000 Subject: ipv6: use DST_* macro to set obselete field Signed-off-by: Nicolas Dichtel Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index fb29e22..854e401 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -226,7 +226,7 @@ static struct rt6_info ip6_null_entry_template = { .dst = { .__refcnt = ATOMIC_INIT(1), .__use = 1, - .obsolete = -1, + .obsolete = DST_OBSOLETE_FORCE_CHK, .error = -ENETUNREACH, .input = ip6_pkt_discard, .output = ip6_pkt_discard_out, @@ -246,7 +246,7 @@ static struct rt6_info ip6_prohibit_entry_template = { .dst = { .__refcnt = ATOMIC_INIT(1), .__use = 1, - .obsolete = -1, + .obsolete = DST_OBSOLETE_FORCE_CHK, .error = -EACCES, .input = ip6_pkt_prohibit, .output = ip6_pkt_prohibit_out, @@ -261,7 +261,7 @@ static struct rt6_info ip6_blk_hole_entry_template = { .dst = { .__refcnt = ATOMIC_INIT(1), .__use = 1, - .obsolete = -1, + .obsolete = DST_OBSOLETE_FORCE_CHK, .error = -EINVAL, .input = dst_discard, .output = dst_discard, -- cgit v0.10.2 From 864745d291b5ba80ea0bd0edcbe67273de368836 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Thu, 13 Sep 2012 11:41:26 +0000 Subject: xfrm_user: return error pointer instead of NULL When dump_one_state() returns an error, e.g. because of a too small buffer to dump the whole xfrm state, xfrm_state_netlink() returns NULL instead of an error pointer. But its callers expect an error pointer and therefore continue to operate on a NULL skbuff. This could lead to a privilege escalation (execution of user code in kernel context) if the attacker has CAP_NET_ADMIN and is able to map address 0. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index e75d8e4..dac08e2 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -878,6 +878,7 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb, { struct xfrm_dump_info info; struct sk_buff *skb; + int err; skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_ATOMIC); if (!skb) @@ -888,9 +889,10 @@ static struct sk_buff *xfrm_state_netlink(struct sk_buff *in_skb, info.nlmsg_seq = seq; info.nlmsg_flags = 0; - if (dump_one_state(x, 0, &info)) { + err = dump_one_state(x, 0, &info); + if (err) { kfree_skb(skb); - return NULL; + return ERR_PTR(err); } return skb; -- cgit v0.10.2 From c25463722509fef0ed630b271576a8c9a70236f3 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Fri, 14 Sep 2012 09:58:32 +0000 Subject: xfrm_user: return error pointer instead of NULL #2 When dump_one_policy() returns an error, e.g. because of a too small buffer to dump the whole xfrm policy, xfrm_policy_netlink() returns NULL instead of an error pointer. But its caller expects an error pointer and therefore continues to operate on a NULL skbuff. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index dac08e2..d12b625 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1548,6 +1548,7 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb, { struct xfrm_dump_info info; struct sk_buff *skb; + int err; skb = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); if (!skb) @@ -1558,9 +1559,10 @@ static struct sk_buff *xfrm_policy_netlink(struct sk_buff *in_skb, info.nlmsg_seq = seq; info.nlmsg_flags = 0; - if (dump_one_policy(xp, dir, 0, &info) < 0) { + err = dump_one_policy(xp, dir, 0, &info); + if (err) { kfree_skb(skb); - return NULL; + return ERR_PTR(err); } return skb; -- cgit v0.10.2 From e488921f44765e8ab6c48ca35e3f6b78df9819df Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 13 Sep 2012 12:59:44 +0000 Subject: bnx2x: fix rx checksum validation for IPv6 Commit d6cb3e41 "bnx2x: fix checksum validation" caused a performance regression for IPv6. Rx checksum offload does not work. IPv6 packets are passed to the stack with CHECKSUM_NONE. The hardware obviously cannot perform IP checksum validation for IPv6, because there is no checksum in the IPv6 header. This should not prevent us from setting CHECKSUM_UNNECESSARY. Tested on BCM57711. Signed-off-by: Michal Schmidt Acked-by: Eric Dumazet Acked-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c index af20c6e..e8e97a7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c @@ -662,14 +662,16 @@ void bnx2x_csum_validate(struct sk_buff *skb, union eth_rx_cqe *cqe, struct bnx2x_fastpath *fp, struct bnx2x_eth_q_stats *qstats) { - /* Do nothing if no IP/L4 csum validation was done */ - + /* Do nothing if no L4 csum validation was done. + * We do not check whether IP csum was validated. For IPv4 we assume + * that if the card got as far as validating the L4 csum, it also + * validated the IP csum. IPv6 has no IP csum. + */ if (cqe->fast_path_cqe.status_flags & - (ETH_FAST_PATH_RX_CQE_IP_XSUM_NO_VALIDATION_FLG | - ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG)) + ETH_FAST_PATH_RX_CQE_L4_XSUM_NO_VALIDATION_FLG) return; - /* If both IP/L4 validation were done, check if an error was found. */ + /* If L4 validation was done, check if an error was found. */ if (cqe->fast_path_cqe.type_error_flags & (ETH_FAST_PATH_RX_CQE_IP_BAD_XSUM_FLG | -- cgit v0.10.2 From 3ceefe4319636d89d4bdf40dca9471970f942e4f Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 11 Sep 2012 13:43:17 -0700 Subject: hwmon: (ad7314) Add 'name' sysfs attribute The 'name' sysfs attribute is mandatory for hwmon devices, but was missing in this driver. Cc: Jonathan Cameron Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck Acked-by: Jean Delvare Acked-by: Jonathan Cameron diff --git a/drivers/hwmon/ad7314.c b/drivers/hwmon/ad7314.c index cfec802..f915eb1 100644 --- a/drivers/hwmon/ad7314.c +++ b/drivers/hwmon/ad7314.c @@ -87,10 +87,18 @@ static ssize_t ad7314_show_temperature(struct device *dev, } } +static ssize_t ad7314_show_name(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + return sprintf(buf, "%s\n", to_spi_device(dev)->modalias); +} + +static DEVICE_ATTR(name, S_IRUGO, ad7314_show_name, NULL); static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, ad7314_show_temperature, NULL, 0); static struct attribute *ad7314_attributes[] = { + &dev_attr_name.attr, &sensor_dev_attr_temp1_input.dev_attr.attr, NULL, }; -- cgit v0.10.2 From 521cf6489269f5b223c24857d99c779e91f42d3e Mon Sep 17 00:00:00 2001 From: Parag Warudkar Date: Mon, 17 Sep 2012 17:49:55 +0200 Subject: hwmon: (applesmc) Bump max wait A heavy-load test on a MacBookPro6,1 is still showing a substantial amount of read errors. Increasing the maximum wait time to 128 ms resolves the issue. Signed-off-by: Parag Warudkar Signed-off-by: Henrik Rydberg Signed-off-by: Guenter Roeck diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index 2827088..8f3f6f2 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -53,10 +53,10 @@ #define APPLESMC_MAX_DATA_LENGTH 32 -/* wait up to 32 ms for a status change. */ +/* wait up to 128 ms for a status change. */ #define APPLESMC_MIN_WAIT 0x0010 #define APPLESMC_RETRY_WAIT 0x0100 -#define APPLESMC_MAX_WAIT 0x8000 +#define APPLESMC_MAX_WAIT 0x20000 #define APPLESMC_READ_CMD 0x10 #define APPLESMC_WRITE_CMD 0x11 -- cgit v0.10.2 From e4d1aa40e363ed3e0486aeeeb0d173f7f822737e Mon Sep 17 00:00:00 2001 From: Nikolay Aleksandrov Date: Fri, 14 Sep 2012 05:50:03 +0000 Subject: netxen: check for root bus in netxen_mask_aer_correctable Add a check if pdev->bus->self == NULL (root bus). When attaching a netxen NIC to a VM it can be on the root bus and the guest would crash in netxen_mask_aer_correctable() because of a NULL pointer dereference if CONFIG_PCIEAER is present. Signed-off-by: Nikolay Aleksandrov Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c index 342b3a7..a77c558 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c @@ -1378,6 +1378,10 @@ static void netxen_mask_aer_correctable(struct netxen_adapter *adapter) struct pci_dev *root = pdev->bus->self; u32 aer_pos; + /* root bus? */ + if (!root) + return; + if (adapter->ahw.board_type != NETXEN_BRDTYPE_P3_4_GB_MM && adapter->ahw.board_type != NETXEN_BRDTYPE_P3_10G_TP) return; -- cgit v0.10.2 From 0e698bf6624c469cd4f3f391247b142963ca9c4e Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Sat, 15 Sep 2012 22:44:16 +0000 Subject: net: fix memory leak on oom with zerocopy If orphan flags fails, we don't free the skb on receive, which leaks the skb memory. Return value was also wrong: netif_receive_skb is supposed to return NET_RX_DROP, not ENOMEM. Signed-off-by: Michael S. Tsirkin Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index d7fe32c..ac7609d 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3322,7 +3322,7 @@ ncls: if (pt_prev) { if (unlikely(skb_orphan_frags(skb, GFP_ATOMIC))) - ret = -ENOMEM; + goto drop; else ret = pt_prev->func(skb, skb->dev, pt_prev, orig_dev); } else { -- cgit v0.10.2 From 1d57f19539c074105791da6384a8ad674bba8037 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 17 Sep 2012 12:51:39 +0000 Subject: tcp: fix regression in urgent data handling Stephan Springl found that commit 1402d366019fed "tcp: introduce tcp_try_coalesce" introduced a regression for rlogin It turns out problem comes from TCP urgent data handling and a change in behavior in input path. rlogin sends two one-byte packets with URG ptr set, and when next data frame is coalesced, we lack sk_data_ready() calls to wakeup consumer. Signed-off-by: Eric Dumazet Reported-by: Stephan Springl Cc: Alexander Duyck Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 6e38c6c..d377f48 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4661,7 +4661,7 @@ queue_and_out: if (eaten > 0) kfree_skb_partial(skb, fragstolen); - else if (!sock_flag(sk, SOCK_DEAD)) + if (!sock_flag(sk, SOCK_DEAD)) sk->sk_data_ready(sk, 0); return; } @@ -5556,8 +5556,7 @@ no_ack: #endif if (eaten) kfree_skb_partial(skb, fragstolen); - else - sk->sk_data_ready(sk, 0); + sk->sk_data_ready(sk, 0); return 0; } } -- cgit v0.10.2 From 433a19548061bb5457b6ab77ed7ea58ca6e43ddb Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Mon, 17 Sep 2012 22:40:10 +0000 Subject: xfrm: fix a read lock imbalance in make_blackhole if xfrm_policy_get_afinfo returns 0, it has already released the read lock, xfrm_policy_put_afinfo should not be called again. Signed-off-by: Li RongQing Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_policy.c b/net/xfrm/xfrm_policy.c index ab2ce7d..387848e 100644 --- a/net/xfrm/xfrm_policy.c +++ b/net/xfrm/xfrm_policy.c @@ -1764,7 +1764,7 @@ static struct dst_entry *make_blackhole(struct net *net, u16 family, if (!afinfo) { dst_release(dst_orig); - ret = ERR_PTR(-EINVAL); + return ERR_PTR(-EINVAL); } else { ret = afinfo->blackhole_route(net, dst_orig); } -- cgit v0.10.2 From 59d86c760fbb855d9a26b9b280d4ff59303f2fc5 Mon Sep 17 00:00:00 2001 From: Tushar Dave Date: Sat, 15 Sep 2012 10:16:57 +0000 Subject: e1000: Small packets may get corrupted during padding by HW On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, packets may get corrupted during padding by HW. To WA this issue, pad all small packets manually. Signed-off-by: Tushar Dave Tested-by: Aaron Brown Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c b/drivers/net/ethernet/intel/e1000/e1000_main.c index 3bfbb8d..bde337e 100644 --- a/drivers/net/ethernet/intel/e1000/e1000_main.c +++ b/drivers/net/ethernet/intel/e1000/e1000_main.c @@ -3149,6 +3149,17 @@ static netdev_tx_t e1000_xmit_frame(struct sk_buff *skb, return NETDEV_TX_OK; } + /* On PCI/PCI-X HW, if packet size is less than ETH_ZLEN, + * packets may get corrupted during padding by HW. + * To WA this issue, pad all small packets manually. + */ + if (skb->len < ETH_ZLEN) { + if (skb_pad(skb, ETH_ZLEN - skb->len)) + return NETDEV_TX_OK; + skb->len = ETH_ZLEN; + skb_set_tail_pointer(skb, ETH_ZLEN); + } + mss = skb_shinfo(skb)->gso_size; /* The controller does a simple calculation to * make sure there is enough room in the FIFO before -- cgit v0.10.2 From c73f693989d7a7d99ec66a7065295a0c93d0b127 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Tue, 18 Sep 2012 14:21:01 -0400 Subject: cifs: fix return value in cifsConvertToUTF16 This function returns the wrong value, which causes the callers to get the length of the resulting pathname wrong when it contains non-ASCII characters. This seems to fix https://bugzilla.samba.org/show_bug.cgi?id=6767 Cc: Reported-by: Baldvin Kovacs Reported-and-Tested-by: Nicolas Lefebvre Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c index 7dab9c0..53cf2aa 100644 --- a/fs/cifs/cifs_unicode.c +++ b/fs/cifs/cifs_unicode.c @@ -328,7 +328,7 @@ cifsConvertToUTF16(__le16 *target, const char *source, int srclen, } ctoUTF16_out: - return i; + return j; } #ifdef CONFIG_CIFS_SMB2 -- cgit v0.10.2 From 0ba6e5368c302819da7aff537e0d7eff2616c6a6 Mon Sep 17 00:00:00 2001 From: Ben Myers Date: Thu, 13 Sep 2012 16:18:47 -0500 Subject: xfs: stop the sync worker before xfs_unmountfs Cancel work of the xfs_sync_worker before teardown of the log in xfs_unmountfs. This prevents occasional crashes on unmount like so: PID: 21602 TASK: ee9df060 CPU: 0 COMMAND: "kworker/0:3" #0 [c5377d28] crash_kexec at c0292c94 #1 [c5377d80] oops_end at c07090c2 #2 [c5377d98] no_context at c06f614e #3 [c5377dbc] __bad_area_nosemaphore at c06f6281 #4 [c5377df4] bad_area_nosemaphore at c06f629b #5 [c5377e00] do_page_fault at c070b0cb #6 [c5377e7c] error_code (via page_fault) at c070892c EAX: f300c6a8 EBX: f300c6a8 ECX: 000000c0 EDX: 000000c0 EBP: c5377ed0 DS: 007b ESI: 00000000 ES: 007b EDI: 00000001 GS: ffffad20 CS: 0060 EIP: c0481ad0 ERR: ffffffff EFLAGS: 00010246 #7 [c5377eb0] atomic64_read_cx8 at c0481ad0 #8 [c5377ebc] xlog_assign_tail_lsn_locked at f7cc7c6e [xfs] #9 [c5377ed4] xfs_trans_ail_delete_bulk at f7ccd520 [xfs] #10 [c5377f0c] xfs_buf_iodone at f7ccb602 [xfs] #11 [c5377f24] xfs_buf_do_callbacks at f7cca524 [xfs] #12 [c5377f30] xfs_buf_iodone_callbacks at f7cca5da [xfs] #13 [c5377f4c] xfs_buf_iodone_work at f7c718d0 [xfs] #14 [c5377f58] process_one_work at c024ee4c #15 [c5377f98] worker_thread at c024f43d #16 [c5377fbc] kthread at c025326b #17 [c5377fe8] kernel_thread_helper at c070e834 PID: 26653 TASK: e79143b0 CPU: 3 COMMAND: "umount" #0 [cde0fda0] __schedule at c0706595 #1 [cde0fe28] schedule at c0706b89 #2 [cde0fe30] schedule_timeout at c0705600 #3 [cde0fe94] __down_common at c0706098 #4 [cde0fec8] __down at c0706122 #5 [cde0fed0] down at c025936f #6 [cde0fee0] xfs_buf_lock at f7c7131d [xfs] #7 [cde0ff00] xfs_freesb at f7cc2236 [xfs] #8 [cde0ff10] xfs_fs_put_super at f7c80f21 [xfs] #9 [cde0ff1c] generic_shutdown_super at c0333d7a #10 [cde0ff38] kill_block_super at c0333e0f #11 [cde0ff48] deactivate_locked_super at c0334218 #12 [cde0ff58] deactivate_super at c033495d #13 [cde0ff68] mntput_no_expire at c034bc13 #14 [cde0ff7c] sys_umount at c034cc69 #15 [cde0ffa0] sys_oldumount at c034ccd4 #16 [cde0ffb0] system_call at c0707e66 commit 11159a05 added this to xfs_log_unmount and needs to be cleaned up at a later date. Signed-off-by: Ben Myers Reviewed-by: Dave Chinner Reviewed-by: Mark Tinguely diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c index bdaf4cb..19e2380 100644 --- a/fs/xfs/xfs_super.c +++ b/fs/xfs/xfs_super.c @@ -919,6 +919,7 @@ xfs_fs_put_super( struct xfs_mount *mp = XFS_M(sb); xfs_filestream_unmount(mp); + cancel_delayed_work_sync(&mp->m_sync_work); xfs_unmountfs(mp); xfs_syncd_stop(mp); xfs_freesb(mp); -- cgit v0.10.2 From a852d7b8a0cf29499905c9243fa6d3fb93898b82 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 19 Sep 2012 12:48:30 +1000 Subject: Revert "md/raid5: For odirect-write performance, do not set STRIPE_PREREAD_ACTIVE." This reverts commit 895e3c5c58a80bb9e4e05d9ac38b4f30e0f97d80. While this patch seemed like a good idea and did help some workloads, it hurts other workloads. Large sequential O_DIRECT writes were faster, Small random O_DIRECT writes were slower. Other changes (batching RAID5 writes) have improved the sequential writes using a different mechanism, so the net result of this patch is definitely negative. So revert it. Reported-by: Shaohua Li Tested-by: Jianpeng Ma Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index adda94d..380cb68 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4192,7 +4192,7 @@ static void make_request(struct mddev *mddev, struct bio * bi) finish_wait(&conf->wait_for_overlap, &w); set_bit(STRIPE_HANDLE, &sh->state); clear_bit(STRIPE_DELAYED, &sh->state); - if ((bi->bi_rw & REQ_NOIDLE) && + if ((bi->bi_rw & REQ_SYNC) && !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state)) atomic_inc(&conf->preread_active_stripes); release_stripe_plug(mddev, sh); -- cgit v0.10.2 From e5c86471f933608db5d43679f84cb4346c32033e Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 19 Sep 2012 12:52:30 +1000 Subject: md/raid5: fix calculate of 'degraded' when a replacement becomes active. When a replacement device becomes active, we mark the device that it replaces as 'faulty' so that it can subsequently get removed. However 'calc_degraded' only pays attention to the primary device, not the replacement, so the array appears to become degraded, which is wrong. So teach 'calc_degraded' to consider any replacement if a primary device is faulty. This is suitable for -stable as an incorrect 'degraded' value can confuse md and could lead to data corruption. This is only relevant for 3.3 and later. Cc: stable@vger.kernel.org Reported-by: Robin Hill Reported-by: John Drescher Signed-off-by: NeilBrown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 380cb68..7031b86 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -393,6 +393,8 @@ static int calc_degraded(struct r5conf *conf) degraded = 0; for (i = 0; i < conf->previous_raid_disks; i++) { struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = rcu_dereference(conf->disks[i].replacement); if (!rdev || test_bit(Faulty, &rdev->flags)) degraded++; else if (test_bit(In_sync, &rdev->flags)) @@ -417,6 +419,8 @@ static int calc_degraded(struct r5conf *conf) degraded2 = 0; for (i = 0; i < conf->raid_disks; i++) { struct md_rdev *rdev = rcu_dereference(conf->disks[i].rdev); + if (rdev && test_bit(Faulty, &rdev->flags)) + rdev = rcu_dereference(conf->disks[i].replacement); if (!rdev || test_bit(Faulty, &rdev->flags)) degraded2++; else if (test_bit(In_sync, &rdev->flags)) -- cgit v0.10.2 From 6dafab6b1383e912cd252fa809570b484eb6e0dc Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 19 Sep 2012 12:54:22 +1000 Subject: md: make sure metadata is updated when spares are activated or removed. It isn't always necessary to update the metadata when spares are removed as the presence-or-not of a spare isn't really important to the integrity of an array. Also activating a spare doesn't always require updating the metadata as the update on 'recovery-completed' is usually sufficient. However the introduction of 'replacement' devices have made these transitions sometimes more important. For example the 'Replacement' flag isn't cleared until the original device is removed, so we need to ensure a metadata update after that 'spare' is removed. So set MD_CHANGE_DEVS whenever a spare is activated or removed, to complement the current situation where it is set when a spare is added or a device is failed (or a number of other less common situations). This is suitable for -stable as out-of-data metadata could lead to data corruption. This is only relevant for 3.3 and later 9when 'replacement' as introduced. Cc: stable@vger.kernel.org Signed-off-by: NeilBrown diff --git a/drivers/md/md.c b/drivers/md/md.c index 3f6203a..308e87b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -7619,6 +7619,8 @@ static int remove_and_add_spares(struct mddev *mddev) } } } + if (removed) + set_bit(MD_CHANGE_DEVS, &mddev->flags); return spares; } @@ -7632,9 +7634,11 @@ static void reap_sync_thread(struct mddev *mddev) !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { /* success...*/ /* activate any spares */ - if (mddev->pers->spare_active(mddev)) + if (mddev->pers->spare_active(mddev)) { sysfs_notify(&mddev->kobj, NULL, "degraded"); + set_bit(MD_CHANGE_DEVS, &mddev->flags); + } } if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery) && mddev->pers->finish_reshape) -- cgit v0.10.2 From 263a523d18bca306016d75f5c8d5c57c37fe52fb Mon Sep 17 00:00:00 2001 From: Guenter Roeck Date: Tue, 18 Sep 2012 20:42:31 -0700 Subject: linux/kernel.h: Fix warning seen with W=1 due to change in DIV_ROUND_CLOSEST After commit b6d86d3d (Fix DIV_ROUND_CLOSEST to support negative dividends), the following warning is seen if the kernel is compiled with W=1 (-Wextra): warning: comparison of unsigned expression >= 0 is always true The warning is due to the test '((typeof(x))-1) >= 0', which is used to detect if the variable type is unsigned. Research on the web suggests that the warning disappears if '>' instead of '>=' is used for the comparison. Tests after changing the macro along that line show that the warning is gone, and that the result is still correct: i=-4: DIV_ROUND_CLOSEST(i, 2)=-2 i=-3: DIV_ROUND_CLOSEST(i, 2)=-2 i=-2: DIV_ROUND_CLOSEST(i, 2)=-1 i=-1: DIV_ROUND_CLOSEST(i, 2)=-1 i=0: DIV_ROUND_CLOSEST(i, 2)=0 i=1: DIV_ROUND_CLOSEST(i, 2)=1 i=2: DIV_ROUND_CLOSEST(i, 2)=1 i=3: DIV_ROUND_CLOSEST(i, 2)=2 i=4: DIV_ROUND_CLOSEST(i, 2)=2 Code size is the same as before. Signed-off-by: Guenter Roeck Tested-by: Mauro Carvalho Chehab Acked-by: Jean Delvare diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 594b419..2451f1f 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -91,7 +91,7 @@ { \ typeof(x) __x = x; \ typeof(divisor) __d = divisor; \ - (((typeof(x))-1) >= 0 || (__x) >= 0) ? \ + (((typeof(x))-1) > 0 || (__x) > 0) ? \ (((__x) + ((__d) / 2)) / (__d)) : \ (((__x) - ((__d) / 2)) / (__d)); \ } \ -- cgit v0.10.2 From 20a36e39d59757252edbbdcf9574ae2998733ce9 Mon Sep 17 00:00:00 2001 From: Stephane Eranian Date: Tue, 11 Sep 2012 01:07:01 +0200 Subject: perf/x86: Fix Intel Ivy Bridge support This patch updates the existing Intel IvyBridge (model 58) support with proper PEBS event constraints. It cannot reuse the same as SandyBridge because some events (0xd3) are specific to IvyBridge. Also there is no UOPS_DISPATCHED.THREAD on IVB, so do not populate the PERF_COUNT_HW_STALLED_CYCLES_BACKEND mapping. Signed-off-by: Stephane Eranian Cc: peterz@infradead.org Cc: ak@linux.intel.com Link: http://lkml.kernel.org/r/20120910230701.GA5898@quad Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/cpu/perf_event.h b/arch/x86/kernel/cpu/perf_event.h index 6605a81..8b6defe 100644 --- a/arch/x86/kernel/cpu/perf_event.h +++ b/arch/x86/kernel/cpu/perf_event.h @@ -586,6 +586,8 @@ extern struct event_constraint intel_westmere_pebs_event_constraints[]; extern struct event_constraint intel_snb_pebs_event_constraints[]; +extern struct event_constraint intel_ivb_pebs_event_constraints[]; + struct event_constraint *intel_pebs_constraints(struct perf_event *event); void intel_pmu_pebs_enable(struct perf_event *event); diff --git a/arch/x86/kernel/cpu/perf_event_intel.c b/arch/x86/kernel/cpu/perf_event_intel.c index 0d3d63a..6bca492 100644 --- a/arch/x86/kernel/cpu/perf_event_intel.c +++ b/arch/x86/kernel/cpu/perf_event_intel.c @@ -2048,7 +2048,6 @@ __init int intel_pmu_init(void) case 42: /* SandyBridge */ case 45: /* SandyBridge, "Romely-EP" */ x86_add_quirk(intel_sandybridge_quirk); - case 58: /* IvyBridge */ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids)); memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, @@ -2073,6 +2072,29 @@ __init int intel_pmu_init(void) pr_cont("SandyBridge events, "); break; + case 58: /* IvyBridge */ + memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, + sizeof(hw_cache_event_ids)); + memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, + sizeof(hw_cache_extra_regs)); + + intel_pmu_lbr_init_snb(); + + x86_pmu.event_constraints = intel_snb_event_constraints; + x86_pmu.pebs_constraints = intel_ivb_pebs_event_constraints; + x86_pmu.pebs_aliases = intel_pebs_aliases_snb; + x86_pmu.extra_regs = intel_snb_extra_regs; + /* all extra regs are per-cpu when HT is on */ + x86_pmu.er_flags |= ERF_HAS_RSP_1; + x86_pmu.er_flags |= ERF_NO_HT_SHARING; + + /* UOPS_ISSUED.ANY,c=1,i=1 to count stall cycles */ + intel_perfmon_event_map[PERF_COUNT_HW_STALLED_CYCLES_FRONTEND] = + X86_CONFIG(.event=0x0e, .umask=0x01, .inv=1, .cmask=1); + + pr_cont("IvyBridge events, "); + break; + default: switch (x86_pmu.version) { diff --git a/arch/x86/kernel/cpu/perf_event_intel_ds.c b/arch/x86/kernel/cpu/perf_event_intel_ds.c index e38d97b..826054a 100644 --- a/arch/x86/kernel/cpu/perf_event_intel_ds.c +++ b/arch/x86/kernel/cpu/perf_event_intel_ds.c @@ -407,6 +407,20 @@ struct event_constraint intel_snb_pebs_event_constraints[] = { EVENT_CONSTRAINT_END }; +struct event_constraint intel_ivb_pebs_event_constraints[] = { + INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */ + INTEL_UEVENT_CONSTRAINT(0x01c2, 0xf), /* UOPS_RETIRED.ALL */ + INTEL_UEVENT_CONSTRAINT(0x02c2, 0xf), /* UOPS_RETIRED.RETIRE_SLOTS */ + INTEL_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xcd, 0x8), /* MEM_TRANS_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd0, 0xf), /* MEM_UOP_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd1, 0xf), /* MEM_LOAD_UOPS_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd2, 0xf), /* MEM_LOAD_UOPS_LLC_HIT_RETIRED.* */ + INTEL_EVENT_CONSTRAINT(0xd3, 0xf), /* MEM_LOAD_UOPS_LLC_MISS_RETIRED.* */ + EVENT_CONSTRAINT_END +}; + struct event_constraint *intel_pebs_constraints(struct perf_event *event) { struct event_constraint *c; -- cgit v0.10.2 From ed48ece27cd3d5ee0354c32bbaec0f3e1d4715c3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Sep 2012 12:48:43 -0700 Subject: workqueue: reimplement work_on_cpu() using system_wq The existing work_on_cpu() implementation is hugely inefficient. It creates a new kthread, execute that single function and then let the kthread die on each invocation. Now that system_wq can handle concurrent executions, there's no advantage of doing this. Reimplement work_on_cpu() using system_wq which makes it simpler and way more efficient. stable: While this isn't a fix in itself, it's needed to fix a workqueue related bug in cpufreq/powernow-k8. AFAICS, this shouldn't break other existing users. Signed-off-by: Tejun Heo Acked-by: Jiri Kosina Cc: Linus Torvalds Cc: Bjorn Helgaas Cc: Len Brown Cc: Rafael J. Wysocki Cc: stable@vger.kernel.org diff --git a/kernel/workqueue.c b/kernel/workqueue.c index b80065a..3c5a79e 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -3576,18 +3576,17 @@ static int __devinit workqueue_cpu_down_callback(struct notifier_block *nfb, #ifdef CONFIG_SMP struct work_for_cpu { - struct completion completion; + struct work_struct work; long (*fn)(void *); void *arg; long ret; }; -static int do_work_for_cpu(void *_wfc) +static void work_for_cpu_fn(struct work_struct *work) { - struct work_for_cpu *wfc = _wfc; + struct work_for_cpu *wfc = container_of(work, struct work_for_cpu, work); + wfc->ret = wfc->fn(wfc->arg); - complete(&wfc->completion); - return 0; } /** @@ -3602,19 +3601,11 @@ static int do_work_for_cpu(void *_wfc) */ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) { - struct task_struct *sub_thread; - struct work_for_cpu wfc = { - .completion = COMPLETION_INITIALIZER_ONSTACK(wfc.completion), - .fn = fn, - .arg = arg, - }; + struct work_for_cpu wfc = { .fn = fn, .arg = arg }; - sub_thread = kthread_create(do_work_for_cpu, &wfc, "work_for_cpu"); - if (IS_ERR(sub_thread)) - return PTR_ERR(sub_thread); - kthread_bind(sub_thread, cpu); - wake_up_process(sub_thread); - wait_for_completion(&wfc.completion); + INIT_WORK_ONSTACK(&wfc.work, work_for_cpu_fn); + schedule_work_on(cpu, &wfc.work); + flush_work(&wfc.work); return wfc.ret; } EXPORT_SYMBOL_GPL(work_on_cpu); -- cgit v0.10.2 From 6889125b8b4e09c5e53e6ecab3433bed1ce198c9 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 18 Sep 2012 14:24:59 -0700 Subject: cpufreq/powernow-k8: workqueue user shouldn't migrate the kworker to another CPU powernowk8_target() runs off a per-cpu work item and if the cpufreq_policy->cpu is different from the current one, it migrates the kworker to the target CPU by manipulating current->cpus_allowed. The function migrates the kworker back to the original CPU but this is still broken. Workqueue concurrency management requires the kworkers to stay on the same CPU and powernowk8_target() ends up triggerring BUG_ON(rq != this_rq()) in try_to_wake_up_local() if it contends on fidvid_mutex and sleeps. It is unclear why this bug is being reported now. Duncan says it appeared to be a regression of 3.6-rc1 and couldn't reproduce it on 3.5. Bisection seemed to point to 63d95a91 "workqueue: use @pool instead of @gcwq or @cpu where applicable" which is an non-functional change. Given that the reproduce case sometimes took upto days to trigger, it's easy to be misled while bisecting. Maybe something made contention on fidvid_mutex more likely? I don't know. This patch fixes the bug by using work_on_cpu() instead if @pol->cpu isn't the same as the current one. The code assumes that cpufreq_policy->cpu is kept online by the caller, which Rafael tells me is the case. stable: ed48ece27c ("workqueue: reimplement work_on_cpu() using system_wq") should be applied before this; otherwise, the behavior could be horrible. Signed-off-by: Tejun Heo Reported-by: Duncan <1i5t5.duncan@cox.net> Tested-by: Duncan <1i5t5.duncan@cox.net> Cc: Rafael J. Wysocki Cc: Andreas Herrmann Cc: stable@vger.kernel.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=47301 diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c index c0e8164..1a40935 100644 --- a/drivers/cpufreq/powernow-k8.c +++ b/drivers/cpufreq/powernow-k8.c @@ -35,7 +35,6 @@ #include #include #include -#include /* for current / set_cpus_allowed() */ #include #include @@ -1139,16 +1138,23 @@ static int transition_frequency_pstate(struct powernow_k8_data *data, return res; } -/* Driver entry point to switch to the target frequency */ -static int powernowk8_target(struct cpufreq_policy *pol, - unsigned targfreq, unsigned relation) +struct powernowk8_target_arg { + struct cpufreq_policy *pol; + unsigned targfreq; + unsigned relation; +}; + +static long powernowk8_target_fn(void *arg) { - cpumask_var_t oldmask; + struct powernowk8_target_arg *pta = arg; + struct cpufreq_policy *pol = pta->pol; + unsigned targfreq = pta->targfreq; + unsigned relation = pta->relation; struct powernow_k8_data *data = per_cpu(powernow_data, pol->cpu); u32 checkfid; u32 checkvid; unsigned int newstate; - int ret = -EIO; + int ret; if (!data) return -EINVAL; @@ -1156,29 +1162,16 @@ static int powernowk8_target(struct cpufreq_policy *pol, checkfid = data->currfid; checkvid = data->currvid; - /* only run on specific CPU from here on. */ - /* This is poor form: use a workqueue or smp_call_function_single */ - if (!alloc_cpumask_var(&oldmask, GFP_KERNEL)) - return -ENOMEM; - - cpumask_copy(oldmask, tsk_cpus_allowed(current)); - set_cpus_allowed_ptr(current, cpumask_of(pol->cpu)); - - if (smp_processor_id() != pol->cpu) { - printk(KERN_ERR PFX "limiting to cpu %u failed\n", pol->cpu); - goto err_out; - } - if (pending_bit_stuck()) { printk(KERN_ERR PFX "failing targ, change pending bit set\n"); - goto err_out; + return -EIO; } pr_debug("targ: cpu %d, %d kHz, min %d, max %d, relation %d\n", pol->cpu, targfreq, pol->min, pol->max, relation); if (query_current_values_with_pending_wait(data)) - goto err_out; + return -EIO; if (cpu_family != CPU_HW_PSTATE) { pr_debug("targ: curr fid 0x%x, vid 0x%x\n", @@ -1196,7 +1189,7 @@ static int powernowk8_target(struct cpufreq_policy *pol, if (cpufreq_frequency_table_target(pol, data->powernow_table, targfreq, relation, &newstate)) - goto err_out; + return -EIO; mutex_lock(&fidvid_mutex); @@ -1209,9 +1202,8 @@ static int powernowk8_target(struct cpufreq_policy *pol, ret = transition_frequency_fidvid(data, newstate); if (ret) { printk(KERN_ERR PFX "transition frequency failed\n"); - ret = 1; mutex_unlock(&fidvid_mutex); - goto err_out; + return 1; } mutex_unlock(&fidvid_mutex); @@ -1220,12 +1212,25 @@ static int powernowk8_target(struct cpufreq_policy *pol, data->powernow_table[newstate].index); else pol->cur = find_khz_freq_from_fid(data->currfid); - ret = 0; -err_out: - set_cpus_allowed_ptr(current, oldmask); - free_cpumask_var(oldmask); - return ret; + return 0; +} + +/* Driver entry point to switch to the target frequency */ +static int powernowk8_target(struct cpufreq_policy *pol, + unsigned targfreq, unsigned relation) +{ + struct powernowk8_target_arg pta = { .pol = pol, .targfreq = targfreq, + .relation = relation }; + + /* + * Must run on @pol->cpu. cpufreq core is responsible for ensuring + * that we're bound to the current CPU and pol->cpu stays online. + */ + if (smp_processor_id() == pol->cpu) + return powernowk8_target_fn(&pta); + else + return work_on_cpu(pol->cpu, powernowk8_target_fn, &pta); } /* Driver entry point to verify the policy and range of frequencies */ -- cgit v0.10.2 From 527df5fae93b755dd5c48f2f5196a11bedd93661 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 19 Sep 2012 10:23:18 -0700 Subject: Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping" This reverts commit ca3b3faf9bee4dc5df4f10eae2d1e48f7de0a8ad. There was a plan to place ab8500_irq_get_virq() calls in each AB8500 child device prior to requesting an IRQ, but as we're no longer using Device Tree to collect our IRQ numbers, it's actually better to allow the core to do this during device registration time. So the IRQ number we pull from its resource has already been converted to a virtual IRQ. Signed-off-by: Lee Jones Acked-by: Linus Walleij Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/ab8500-ponkey.c b/drivers/input/misc/ab8500-ponkey.c index f06231b..84ec691 100644 --- a/drivers/input/misc/ab8500-ponkey.c +++ b/drivers/input/misc/ab8500-ponkey.c @@ -74,8 +74,8 @@ static int __devinit ab8500_ponkey_probe(struct platform_device *pdev) ponkey->idev = input; ponkey->ab8500 = ab8500; - ponkey->irq_dbf = ab8500_irq_get_virq(ab8500, irq_dbf); - ponkey->irq_dbr = ab8500_irq_get_virq(ab8500, irq_dbr); + ponkey->irq_dbf = irq_dbf; + ponkey->irq_dbr = irq_dbr; input->name = "AB8500 POn(PowerOn) Key"; input->dev.parent = &pdev->dev; -- cgit v0.10.2 From bd49940a35ec7d488ae63bd625639893b3385b97 Mon Sep 17 00:00:00 2001 From: Konrad Rzeszutek Wilk Date: Wed, 19 Sep 2012 08:30:55 -0400 Subject: xen/boot: Disable BIOS SMP MP table search. As the initial domain we are able to search/map certain regions of memory to harvest configuration data. For all low-level we use ACPI tables - for interrupts we use exclusively ACPI _PRT (so DSDT) and MADT for INT_SRC_OVR. The SMP MP table is not used at all. As a matter of fact we do not even support machines that only have SMP MP but no ACPI tables. Lets follow how Moorestown does it and just disable searching for BIOS SMP tables. This also fixes an issue on HP Proliant BL680c G5 and DL380 G6: 9f->100 for 1:1 PTE Freeing 9f-100 pfn range: 97 pages freed 1-1 mapping on 9f->100 .. snip.. e820: BIOS-provided physical RAM map: Xen: [mem 0x0000000000000000-0x000000000009efff] usable Xen: [mem 0x000000000009f400-0x00000000000fffff] reserved Xen: [mem 0x0000000000100000-0x00000000cfd1dfff] usable .. snip.. Scan for SMP in [mem 0x00000000-0x000003ff] Scan for SMP in [mem 0x0009fc00-0x0009ffff] Scan for SMP in [mem 0x000f0000-0x000fffff] found SMP MP-table at [mem 0x000f4fa0-0x000f4faf] mapped at [ffff8800000f4fa0] (XEN) mm.c:908:d0 Error getting mfn 100 (pfn 5555555555555555) from L1 entry 0000000000100461 for l1e_owner=0, pg_owner=0 (XEN) mm.c:4995:d0 ptwr_emulate: could not get_page_from_l1e() BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] xen_set_pte_init+0x66/0x71 . snip.. Pid: 0, comm: swapper Not tainted 3.6.0-rc6upstream-00188-gb6fb969-dirty #2 HP ProLiant BL680c G5 .. snip.. Call Trace: [] __early_ioremap+0x18a/0x248 [] ? printk+0x48/0x4a [] early_ioremap+0x13/0x15 [] get_mpc_size+0x2f/0x67 [] smp_scan_config+0x10c/0x136 [] default_find_smp_config+0x36/0x5a [] setup_arch+0x5b3/0xb5b [] ? printk+0x48/0x4a [] start_kernel+0x90/0x390 [] x86_64_start_reservations+0x131/0x136 [] xen_start_kernel+0x65f/0x661 (XEN) Domain 0 crashed: 'noreboot' set - not rebooting. which is that ioremap would end up mapping 0xff using _PAGE_IOMAP (which is what early_ioremap sticks as a flag) - which meant we would get MFN 0xFF (pte ff461, which is OK), and then it would also map 0x100 (b/c ioremap tries to get page aligned request, and it was trying to map 0xf4fa0 + PAGE_SIZE - so it mapped the next page) as _PAGE_IOMAP. Since 0x100 is actually a RAM page, and the _PAGE_IOMAP bypasses the P2M lookup we would happily set the PTE to 1000461. Xen would deny the request since we do not have access to the Machine Frame Number (MFN) of 0x100. The P2M[0x100] is for example 0x80140. CC: stable@vger.kernel.org Fixes-Oracle-Bugzilla: https://bugzilla.oracle.com/bugzilla/show_bug.cgi?id=13665 Acked-by: Jan Beulich Signed-off-by: Konrad Rzeszutek Wilk diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index 9642d4a..1fbe75a 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1452,6 +1452,10 @@ asmlinkage void __init xen_start_kernel(void) pci_request_acs(); xen_acpi_sleep_register(); + + /* Avoid searching for BIOS MP tables */ + x86_init.mpparse.find_smp_config = x86_init_noop; + x86_init.mpparse.get_smp_config = x86_init_uint_noop; } #ifdef CONFIG_PCI /* PCI BIOS service won't work from a PV guest. */ -- cgit v0.10.2 From dbd6b11e15a2f96030da17dbeda943a8a98ee990 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Linus=20L=C3=BCssing?= Date: Fri, 14 Sep 2012 00:40:54 +0000 Subject: batman-adv: make batadv_test_bit() return 0 or 1 only MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit On some architectures test_bit() can return other values than 0 or 1: With a generic x86 OpenWrt image in a kvm setup (batadv_)test_bit() frequently returns -1 for me, leading to batadv_iv_ogm_update_seqnos() wrongly signaling a protected seqno window. This patch tries to fix this issue by making batadv_test_bit() return 0 or 1 only. Signed-off-by: Linus Lüssing Acked-by: Sven Eckelmann Signed-off-by: Antonio Quartulli Signed-off-by: David S. Miller diff --git a/net/batman-adv/bitarray.h b/net/batman-adv/bitarray.h index a081ce1..cebaae7 100644 --- a/net/batman-adv/bitarray.h +++ b/net/batman-adv/bitarray.h @@ -20,8 +20,8 @@ #ifndef _NET_BATMAN_ADV_BITARRAY_H_ #define _NET_BATMAN_ADV_BITARRAY_H_ -/* returns true if the corresponding bit in the given seq_bits indicates true - * and curr_seqno is within range of last_seqno +/* Returns 1 if the corresponding bit in the given seq_bits indicates true + * and curr_seqno is within range of last_seqno. Otherwise returns 0. */ static inline int batadv_test_bit(const unsigned long *seq_bits, uint32_t last_seqno, uint32_t curr_seqno) @@ -32,7 +32,7 @@ static inline int batadv_test_bit(const unsigned long *seq_bits, if (diff < 0 || diff >= BATADV_TQ_LOCAL_WINDOW_SIZE) return 0; else - return test_bit(diff, seq_bits); + return test_bit(diff, seq_bits) != 0; } /* turn corresponding bit on, so we can remember that we got the packet */ -- cgit v0.10.2 From 15c041759bfcd9ab0a4e43f1c16e2644977d0467 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Michal=20Kube=C4=8Dek?= Date: Fri, 14 Sep 2012 04:59:52 +0000 Subject: tcp: flush DMA queue before sk_wait_data if rcv_wnd is zero If recv() syscall is called for a TCP socket so that - IOAT DMA is used - MSG_WAITALL flag is used - requested length is bigger than sk_rcvbuf - enough data has already arrived to bring rcv_wnd to zero then when tcp_recvmsg() gets to calling sk_wait_data(), receive window can be still zero while sk_async_wait_queue exhausts enough space to keep it zero. As this queue isn't cleaned until the tcp_service_net_dma() call, sk_wait_data() cannot receive any data and blocks forever. If zero receive window and non-empty sk_async_wait_queue is detected before calling sk_wait_data(), process the queue first. Signed-off-by: Michal Kubecek Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 2109ff4..bf9a8ab 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1762,8 +1762,14 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, } #ifdef CONFIG_NET_DMA - if (tp->ucopy.dma_chan) - dma_async_memcpy_issue_pending(tp->ucopy.dma_chan); + if (tp->ucopy.dma_chan) { + if (tp->rcv_wnd == 0 && + !skb_queue_empty(&sk->sk_async_wait_queue)) { + tcp_service_net_dma(sk, true); + tcp_cleanup_rbuf(sk, copied); + } else + dma_async_memcpy_issue_pending(tp->ucopy.dma_chan); + } #endif if (copied >= target) { /* Do not sleep, just process backlog. */ -- cgit v0.10.2 From 71261956973ba9e0637848a5adb4a5819b4bae83 Mon Sep 17 00:00:00 2001 From: Paolo Valente Date: Sat, 15 Sep 2012 00:41:35 +0000 Subject: pkt_sched: fix virtual-start-time update in QFQ If the old timestamps of a class, say cl, are stale when the class becomes active, then QFQ may assign to cl a much higher start time than the maximum value allowed. This may happen when QFQ assigns to the start time of cl the finish time of a group whose classes are characterized by a higher value of the ratio max_class_pkt/weight_of_the_class with respect to that of cl. Inserting a class with a too high start time into the bucket list corrupts the data structure and may eventually lead to crashes. This patch limits the maximum start time assigned to a class. Signed-off-by: Paolo Valente Signed-off-by: David S. Miller diff --git a/net/sched/sch_qfq.c b/net/sched/sch_qfq.c index e4723d3..211a212 100644 --- a/net/sched/sch_qfq.c +++ b/net/sched/sch_qfq.c @@ -865,7 +865,10 @@ static void qfq_update_start(struct qfq_sched *q, struct qfq_class *cl) if (mask) { struct qfq_group *next = qfq_ffs(q, mask); if (qfq_gt(roundedF, next->F)) { - cl->S = next->F; + if (qfq_gt(limit, next->F)) + cl->S = next->F; + else /* preserve timestamp correctness */ + cl->S = limit; return; } } -- cgit v0.10.2 From 20332ff376995daa08dcee2a193555800f17514b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Wed, 19 Sep 2012 12:43:21 +0100 Subject: ARM: 7537/1: clk: Fix release in devm_clk_put() Surprisingly devres_destroy() doesn't call the destructor for the resource it is destroying, use the newly added devres_release() instead to fix this. Signed-off-by: Mark Brown Signed-off-by: Russell King diff --git a/drivers/clk/clk-devres.c b/drivers/clk/clk-devres.c index f1e7a83..8f57154 100644 --- a/drivers/clk/clk-devres.c +++ b/drivers/clk/clk-devres.c @@ -48,7 +48,7 @@ void devm_clk_put(struct device *dev, struct clk *clk) { int ret; - ret = devres_destroy(dev, devm_clk_release, devm_clk_match, clk); + ret = devres_release(dev, devm_clk_release, devm_clk_match, clk); WARN_ON(ret); } -- cgit v0.10.2 From 2b25d9f64b542cd19e020ce9d4d628c1feba96e5 Mon Sep 17 00:00:00 2001 From: Mike Turquette Date: Thu, 13 Sep 2012 22:04:18 +0100 Subject: ARM: 7535/1: Reprogram smp_twd based on new common clk framework notifiers Running cpufreq driver on imx6q, the following warning is seen. $ BUG: sleeping function called from invalid context at kernel/mutex.c:269 stack backtrace: Backtrace: [<80011d64>] (dump_backtrace+0x0/0x10c) from [<803fc164>] (dump_stack+0x18/0x1c) r6:bf8142e0 r5:bf814000 r4:806ac794 r3:bf814000 [<803fc14c>] (dump_stack+0x0/0x1c) from [<803fd444>] (print_usage_bug+0x250/0x2b 8) [<803fd1f4>] (print_usage_bug+0x0/0x2b8) from [<80060f90>] (mark_lock+0x56c/0x67 0) [<80060a24>] (mark_lock+0x0/0x670) from [<80061a20>] (__lock_acquire+0x98c/0x19b 4) [<80061094>] (__lock_acquire+0x0/0x19b4) from [<80062f14>] (lock_acquire+0x68/0x 7c) [<80062eac>] (lock_acquire+0x0/0x7c) from [<80400f28>] (mutex_lock_nested+0x78/0 x344) r7:00000000 r6:bf872000 r5:805cc858 r4:805c2a04 [<80400eb0>] (mutex_lock_nested+0x0/0x344) from [<803089ac>] (clk_get_rate+0x1c/ 0x58) [<80308990>] (clk_get_rate+0x0/0x58) from [<80013c48>] (twd_update_frequency+0x1 8/0x50) r5:bf253d04 r4:805cadf4 [<80013c30>] (twd_update_frequency+0x0/0x50) from [<80068e20>] (generic_smp_call _function_single_interrupt+0xd4/0x13c) r4:bf873ee0 r3:80013c30 [<80068d4c>] (generic_smp_call_function_single_interrupt+0x0/0x13c) from [<80013 34c>] (handle_IPI+0xc0/0x194) r8:00000001 r7:00000000 r6:80574e48 r5:bf872000 r4:80593958 [<8001328c>] (handle_IPI+0x0/0x194) from [<800084e8>] (gic_handle_irq+0x58/0x60) r8:00000000 r7:bf873f8c r6:bf873f58 r5:80593070 r4:f4000100 r3:00000005 [<80008490>] (gic_handle_irq+0x0/0x60) from [<8000e124>] (__irq_svc+0x44/0x60) Exception stack(0xbf873f58 to 0xbf873fa0) 3f40: 00000001 00000001 3f60: 00000000 bf814000 bf872000 805cab48 80405aa4 80597648 00000000 412fc09a 3f80: bf872000 bf873fac bf873f70 bf873fa0 80063844 8000f1f8 20000013 ffffffff r6:ffffffff r5:20000013 r4:8000f1f8 r3:bf814000 [<8000f1b8>] (default_idle+0x0/0x4c) from [<8000f428>] (cpu_idle+0x98/0x114) [<8000f390>] (cpu_idle+0x0/0x114) from [<803f9834>] (secondary_start_kernel+0x11 c/0x140) [<803f9718>] (secondary_start_kernel+0x0/0x140) from [<103f9234>] (0x103f9234) r6:10c03c7d r5:0000001f r4:4f86806a r3:803f921c It looks that the warning is caused by that twd_update_frequency() gets called from an atomic context while it calls clk_get_rate() where a mutex gets held. To fix the warning, let's convert common clk users over to clk notifiers in place of CPUfreq notifiers. This works out nicely for Cortex-A9 MPcore designs that scale all CPUs at the same frequency. Platforms that have not been converted to the common clk framework and support CPUfreq will rely on the old mechanism. Once these platforms are converted over fully then we can remove the CPUfreq-specific bits for good. Signed-off-by: Mike Turquette Signed-off-by: Shawn Guo Reviewed-by: Linus Walleij Reviewed-by: Ulf Hansson Signed-off-by: Russell King diff --git a/arch/arm/kernel/smp_twd.c b/arch/arm/kernel/smp_twd.c index fef42b2..e1f9069 100644 --- a/arch/arm/kernel/smp_twd.c +++ b/arch/arm/kernel/smp_twd.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -96,7 +95,52 @@ static void twd_timer_stop(struct clock_event_device *clk) disable_percpu_irq(clk->irq); } -#ifdef CONFIG_CPU_FREQ +#ifdef CONFIG_COMMON_CLK + +/* + * Updates clockevent frequency when the cpu frequency changes. + * Called on the cpu that is changing frequency with interrupts disabled. + */ +static void twd_update_frequency(void *new_rate) +{ + twd_timer_rate = *((unsigned long *) new_rate); + + clockevents_update_freq(*__this_cpu_ptr(twd_evt), twd_timer_rate); +} + +static int twd_rate_change(struct notifier_block *nb, + unsigned long flags, void *data) +{ + struct clk_notifier_data *cnd = data; + + /* + * The twd clock events must be reprogrammed to account for the new + * frequency. The timer is local to a cpu, so cross-call to the + * changing cpu. + */ + if (flags == POST_RATE_CHANGE) + smp_call_function(twd_update_frequency, + (void *)&cnd->new_rate, 1); + + return NOTIFY_OK; +} + +static struct notifier_block twd_clk_nb = { + .notifier_call = twd_rate_change, +}; + +static int twd_clk_init(void) +{ + if (twd_evt && *__this_cpu_ptr(twd_evt) && !IS_ERR(twd_clk)) + return clk_notifier_register(twd_clk, &twd_clk_nb); + + return 0; +} +core_initcall(twd_clk_init); + +#elif defined (CONFIG_CPU_FREQ) + +#include /* * Updates clockevent frequency when the cpu frequency changes. -- cgit v0.10.2 From ed3770a9cd5764a575b83810ea679bbff2b03082 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?S=C3=B8ren=20holm?= Date: Mon, 17 Sep 2012 21:50:57 +0000 Subject: asix: Support DLink DUB-E100 H/W Ver C1 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Søren Holm Cc: stable@vger.kernel.org Signed-off-by: David S. Miller diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c index 4fd48df..32e31c5 100644 --- a/drivers/net/usb/asix_devices.c +++ b/drivers/net/usb/asix_devices.c @@ -962,6 +962,10 @@ static const struct usb_device_id products [] = { USB_DEVICE (0x2001, 0x3c05), .driver_info = (unsigned long) &ax88772_info, }, { + // DLink DUB-E100 H/W Ver C1 + USB_DEVICE (0x2001, 0x1a02), + .driver_info = (unsigned long) &ax88772_info, +}, { // Linksys USB1000 USB_DEVICE (0x1737, 0x0039), .driver_info = (unsigned long) &ax88178_info, -- cgit v0.10.2 From 8ea853fd0b721f14eacff1a5b364fe3e60d2dd82 Mon Sep 17 00:00:00 2001 From: Li RongQing Date: Tue, 18 Sep 2012 16:53:21 +0000 Subject: net/core: fix comment in skb_try_coalesce It should be the skb which is not cloned Signed-off-by: Li RongQing Acked-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index fe00d12..e33ebae 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3502,7 +3502,9 @@ bool skb_try_coalesce(struct sk_buff *to, struct sk_buff *from, if (!skb_cloned(from)) skb_shinfo(from)->nr_frags = 0; - /* if the skb is cloned this does nothing since we set nr_frags to 0 */ + /* if the skb is not cloned this does nothing + * since we set nr_frags to 0. + */ for (i = 0; i < skb_shinfo(from)->nr_frags; i++) skb_frag_ref(from, i); -- cgit v0.10.2 From 8669cf6793bb38307a30fb6b9565ddc8840ebd3f Mon Sep 17 00:00:00 2001 From: Anisse Astier Date: Wed, 19 Sep 2012 11:10:48 -0700 Subject: Input: i8042 - disable mux on Toshiba C850D On Toshiba Satellite C850D, the touchpad and the keyboard might randomly not work at boot. Preventing MUX mode activation solves this issue. Signed-off-by: Anisse Astier Cc: stable@kernel.org Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 6918773..d6cc77a 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -335,6 +335,12 @@ static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = { }, { .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"), + }, + }, + { + .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"), DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"), }, -- cgit v0.10.2 From 59d1f5c41a21f0d87973f2dedd40efd927a201d6 Mon Sep 17 00:00:00 2001 From: Pawel Moll Date: Wed, 19 Sep 2012 11:10:47 -0700 Subject: Input: ambakmi - [un]prepare clocks when enabling amd disabling Clocks must be prepared before enabling and unprepared after disabling. Use appropriate functions to do this in one go. Signed-off-by: Pawel Moll Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c index 2ffd110..2e77246 100644 --- a/drivers/input/serio/ambakmi.c +++ b/drivers/input/serio/ambakmi.c @@ -72,7 +72,7 @@ static int amba_kmi_open(struct serio *io) unsigned int divisor; int ret; - ret = clk_enable(kmi->clk); + ret = clk_prepare_enable(kmi->clk); if (ret) goto out; @@ -92,7 +92,7 @@ static int amba_kmi_open(struct serio *io) return 0; clk_disable: - clk_disable(kmi->clk); + clk_disable_unprepare(kmi->clk); out: return ret; } @@ -104,7 +104,7 @@ static void amba_kmi_close(struct serio *io) writeb(0, KMICR); free_irq(kmi->irq, kmi); - clk_disable(kmi->clk); + clk_disable_unprepare(kmi->clk); } static int __devinit amba_kmi_probe(struct amba_device *dev, -- cgit v0.10.2 From 30ebb7fa0e3e92145b859ad6e44aa6dc636b4103 Mon Sep 17 00:00:00 2001 From: Tai-hwa Liang Date: Wed, 19 Sep 2012 11:10:47 -0700 Subject: Input: sentelic - filter out erratic movement when lifting finger When lifing finger off the surface some versions of touchpad send movement packets with very low coordinates, which cause cursor to jump to the upper left corner of the screen. Let's ignore least significant bits of X and Y coordinates if higher bits are all zeroes and consider finger not touching the pad. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43197 Reported-and-tested-by: Aleksey Spiridonov Tested-by: Eddie Dunn Tested-by: Jakub Luzny Tested-by: Olivier Goffart Signed-off-by: Tai-hwa Liang Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/sentelic.c b/drivers/input/mouse/sentelic.c index 3f5649f..a261d85 100644 --- a/drivers/input/mouse/sentelic.c +++ b/drivers/input/mouse/sentelic.c @@ -721,6 +721,17 @@ static psmouse_ret_t fsp_process_byte(struct psmouse *psmouse) switch (psmouse->packet[0] >> FSP_PKT_TYPE_SHIFT) { case FSP_PKT_TYPE_ABS: + + if ((packet[0] == 0x48 || packet[0] == 0x49) && + packet[1] == 0 && packet[2] == 0) { + /* + * Ignore coordinate noise when finger leaving the + * surface, otherwise cursor may jump to upper-left + * corner. + */ + packet[3] &= 0xf0; + } + abs_x = GET_ABS_X(packet); abs_y = GET_ABS_Y(packet); -- cgit v0.10.2 From 35b1da4e1e1026b5195649170dfb9ebb52f808e0 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Wed, 19 Sep 2012 15:56:23 -0700 Subject: Input: edt-ft5x06 - return -EFAULT on copy_to_user() error copy_to_user() returns the number of bytes remaining, but we want a negative error code here. Signed-off-by: Axel Lin Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c index b06a5e3..6495777 100644 --- a/drivers/input/touchscreen/edt-ft5x06.c +++ b/drivers/input/touchscreen/edt-ft5x06.c @@ -566,9 +566,12 @@ static ssize_t edt_ft5x06_debugfs_raw_data_read(struct file *file, } read = min_t(size_t, count, tsdata->raw_bufsize - *off); - error = copy_to_user(buf, tsdata->raw_buffer + *off, read); - if (!error) - *off += read; + if (copy_to_user(buf, tsdata->raw_buffer + *off, read)) { + error = -EFAULT; + goto out; + } + + *off += read; out: mutex_unlock(&tsdata->mutex); return error ?: read; -- cgit v0.10.2 From 18d4dbd8866a34507d52495207ef5fcec6d41049 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 20 Sep 2012 21:00:15 +1000 Subject: Revert "drm/nv50-/gpio: initialise to vbios defaults during init" This reverts commit 991083ba60f89e717e3a4175be96d48a810e9eae. We discovered this causes problem on some Dell eDP laptops, so Apple lose out for now, I might try and whip up a dmi based workaround for 3.6 but I'm not sure I'll get time. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c index f034905..f429e6a 100644 --- a/drivers/gpu/drm/nouveau/nv50_gpio.c +++ b/drivers/gpu/drm/nouveau/nv50_gpio.c @@ -115,9 +115,6 @@ nv50_gpio_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; - /* initialise gpios and routing to vbios defaults */ - nouveau_gpio_reset(dev); - /* disable, and ack any pending gpio interrupts */ nv_wr32(dev, 0xe050, 0x00000000); nv_wr32(dev, 0xe054, 0xffffffff); -- cgit v0.10.2 From 16c58081eb95e35f284421176f355eccfc773bbe Mon Sep 17 00:00:00 2001 From: Simon Kitching Date: Thu, 20 Sep 2012 12:59:16 -0400 Subject: drm/radeon: Prevent leak of scratch register on resume from suspend Cards typically have 5-7 scratch registers; one of these is reserved for rdev->rptr_save_reg. Unfortunately the reservation is done in function r100_cp_init, which is called by all drivers except r600 - and this function is also invoked on resume from suspend. After several resumes, no scratch registers are free and graphics acceleration is disabled. Dmesg then reports either: *ERROR* radeon: cp failed to get scratch reg (-22). *ERROR* radeon: cp isn't working(-22). radeon 0000:01:00.0: failed initializing CP (-22). or: *ERROR* radeon: failed to get scratch reg (-22). *ERROR* radeon: failed testing IB on GFX ring (-22). *ERROR* ib ring test failed (-22). The chain of calls on boot for all except r600 is: radeon_init -> ... -> (rXXX_init) -> rXXX_startup -> r100_cp_init The chain of calls on resume for all except r600 is: rXXX_resume -> rXXX_startup -> r100_cp_init. R600 correctly allocates rptr_save_reg in r600_init (ie once only, not in resume). However moving the code into the init functions for all drivers means touching 4 drivers. So instead, this patch just adds a test in r100_cp_init to avoid reallocating on resume. As the rdev structure is allocated via kzalloc in radeon_driver_load_kms, and zero is not a valid registerid, zero safely implies not-yet-allocated. This issue appears to have been introduced in c7eff978 (3.6.0-rcN) Signed-off-by: Simon Kitching Signed-off-by: Alex Deucher diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 8acb34f..8d7e33a 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -1182,7 +1182,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) ring->ready = true; radeon_ttm_set_active_vram_size(rdev, rdev->mc.real_vram_size); - if (radeon_ring_supports_scratch_reg(rdev, ring)) { + if (!ring->rptr_save_reg /* not resuming from suspend */ + && radeon_ring_supports_scratch_reg(rdev, ring)) { r = radeon_scratch_get(rdev, &ring->rptr_save_reg); if (r) { DRM_ERROR("failed to get scratch reg for rptr save (%d).\n", r); -- cgit v0.10.2 From 85f2a2ef1d0ab99523e0b947a2b723f5650ed6aa Mon Sep 17 00:00:00 2001 From: Wen Congyang Date: Thu, 20 Sep 2012 14:04:47 +0800 Subject: tracing: Don't call page_to_pfn() if page is NULL When allocating memory fails, page is NULL. page_to_pfn() will cause the kernel panicked if we don't use sparsemem vmemmap. Link: http://lkml.kernel.org/r/505AB1FF.8020104@cn.fujitsu.com Cc: Frederic Weisbecker Cc: Ingo Molnar Cc: Andrew Morton Cc: stable Acked-by: Mel Gorman Reviewed-by: Minchan Kim Signed-off-by: Wen Congyang Signed-off-by: Steven Rostedt diff --git a/include/trace/events/kmem.h b/include/trace/events/kmem.h index 5f889f1..08fa272 100644 --- a/include/trace/events/kmem.h +++ b/include/trace/events/kmem.h @@ -214,7 +214,7 @@ TRACE_EVENT(mm_page_alloc, TP_printk("page=%p pfn=%lu order=%d migratetype=%d gfp_flags=%s", __entry->page, - page_to_pfn(__entry->page), + __entry->page ? page_to_pfn(__entry->page) : 0, __entry->order, __entry->migratetype, show_gfp_flags(__entry->gfp_flags)) @@ -240,7 +240,7 @@ DECLARE_EVENT_CLASS(mm_page, TP_printk("page=%p pfn=%lu order=%u migratetype=%d percpu_refill=%d", __entry->page, - page_to_pfn(__entry->page), + __entry->page ? page_to_pfn(__entry->page) : 0, __entry->order, __entry->migratetype, __entry->order == 0) -- cgit v0.10.2 From bc26ccd8fc756749de95606d28314efd0ce5aec3 Mon Sep 17 00:00:00 2001 From: Andrey Vagin Date: Wed, 19 Sep 2012 09:40:00 +0000 Subject: tcp: restore rcv_wscale in a repair mode (v2) rcv_wscale is a symetric parameter with snd_wscale. Both this parameters are set on a connection handshake. Without this value a remote window size can not be interpreted correctly, because a value from a packet should be shifted on rcv_wscale. And one more thing is that wscale_ok should be set too. This patch doesn't break a backward compatibility. If someone uses it in a old scheme, a rcv window will be restored with the same bug (rcv_wscale = 0). v2: Save backward compatibility on big-endian system. Before the first two bytes were snd_wscale and the second two bytes were rcv_wscale. Now snd_wscale is opt_val & 0xFFFF and rcv_wscale >> 16. This approach is independent on byte ordering. Cc: David S. Miller Cc: Alexey Kuznetsov Cc: James Morris Cc: Hideaki YOSHIFUJI Cc: Patrick McHardy CC: Pavel Emelyanov Signed-off-by: Andrew Vagin Acked-by: Pavel Emelyanov Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index bf9a8ab..5f64193 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2331,10 +2331,17 @@ static int tcp_repair_options_est(struct tcp_sock *tp, tp->rx_opt.mss_clamp = opt.opt_val; break; case TCPOPT_WINDOW: - if (opt.opt_val > 14) - return -EFBIG; + { + u16 snd_wscale = opt.opt_val & 0xFFFF; + u16 rcv_wscale = opt.opt_val >> 16; + + if (snd_wscale > 14 || rcv_wscale > 14) + return -EFBIG; - tp->rx_opt.snd_wscale = opt.opt_val; + tp->rx_opt.snd_wscale = snd_wscale; + tp->rx_opt.rcv_wscale = rcv_wscale; + tp->rx_opt.wscale_ok = 1; + } break; case TCPOPT_SACK_PERM: if (opt.opt_val != 0) -- cgit v0.10.2 From 9db273f45686218e055a3738f3311048cbb54fee Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Wed, 19 Sep 2012 10:03:36 +0000 Subject: net: qmi_wwan: adding Huawei E367, ZTE MF683 and Pantech P4200 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit One of the modes of Huawei E367 has this QMI/wwan interface: I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=01 Prot=07 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms Huawei use subclass and protocol to identify vendor specific functions, so adding a new vendor rule for this combination. The Pantech devices UML290 (106c:3718) and P4200 (106c:3721) use the same subclass to identify the QMI/wwan function. Replace the existing device specific UML290 entries with generic vendor matching, adding support for the Pantech P4200. The ZTE MF683 has 6 vendor specific interfaces, all using ff/ff/ff for cls/sub/prot. Adding a match on interface #5 which is a QMI/wwan interface. Cc: Fangxiaozhi (Franko) Cc: Thomas Schäfer Cc: Dan Williams Cc: Shawn J. Goff Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index b1ba68f..3543c9e 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -366,16 +366,20 @@ static const struct usb_device_id products[] = { }, /* 2. Combined interface devices matching on class+protocol */ + { /* Huawei E367 and possibly others in "Windows mode" */ + USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 7), + .driver_info = (unsigned long)&qmi_wwan_info, + }, { /* Huawei E392, E398 and possibly others in "Windows mode" */ USB_VENDOR_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, USB_CLASS_VENDOR_SPEC, 1, 17), .driver_info = (unsigned long)&qmi_wwan_shared, }, - { /* Pantech UML290 */ - USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), + { /* Pantech UML290, P4200 and more */ + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf0, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, { /* Pantech UML290 - newer firmware */ - USB_DEVICE_AND_INTERFACE_INFO(0x106c, 0x3718, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), + USB_VENDOR_AND_INTERFACE_INFO(0x106c, USB_CLASS_VENDOR_SPEC, 0xf1, 0xff), .driver_info = (unsigned long)&qmi_wwan_shared, }, @@ -383,6 +387,7 @@ static const struct usb_device_id products[] = { {QMI_FIXED_INTF(0x19d2, 0x0055, 1)}, /* ZTE (Vodafone) K3520-Z */ {QMI_FIXED_INTF(0x19d2, 0x0063, 4)}, /* ZTE (Vodafone) K3565-Z */ {QMI_FIXED_INTF(0x19d2, 0x0104, 4)}, /* ZTE (Vodafone) K4505-Z */ + {QMI_FIXED_INTF(0x19d2, 0x0157, 5)}, /* ZTE MF683 */ {QMI_FIXED_INTF(0x19d2, 0x0167, 4)}, /* ZTE MF820D */ {QMI_FIXED_INTF(0x19d2, 0x0326, 4)}, /* ZTE MF821D */ {QMI_FIXED_INTF(0x19d2, 0x1008, 4)}, /* ZTE (Vodafone) K3570-Z */ -- cgit v0.10.2 From 4c87308bdea31a7b4828a51f6156e6f721a1fcc9 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:38 +0000 Subject: xfrm_user: fix info leak in copy_to_user_auth() copy_to_user_auth() fails to initialize the remainder of alg_name and therefore discloses up to 54 bytes of heap memory via netlink to userland. Use strncpy() instead of strcpy() to fill the trailing bytes of alg_name with null bytes. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index d12b625..40dd50d 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -742,7 +742,7 @@ static int copy_to_user_auth(struct xfrm_algo_auth *auth, struct sk_buff *skb) return -EMSGSIZE; algo = nla_data(nla); - strcpy(algo->alg_name, auth->alg_name); + strncpy(algo->alg_name, auth->alg_name, sizeof(algo->alg_name)); memcpy(algo->alg_key, auth->alg_key, (auth->alg_key_len + 7) / 8); algo->alg_key_len = auth->alg_key_len; -- cgit v0.10.2 From f778a636713a435d3a922c60b1622a91136560c1 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:39 +0000 Subject: xfrm_user: fix info leak in copy_to_user_state() The memory reserved to dump the xfrm state includes the padding bytes of struct xfrm_usersa_info added by the compiler for alignment (7 for amd64, 3 for i386). Add an explicit memset(0) before filling the buffer to avoid the info leak. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 40dd50d..d585459 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -689,6 +689,7 @@ out: static void copy_to_user_state(struct xfrm_state *x, struct xfrm_usersa_info *p) { + memset(p, 0, sizeof(*p)); memcpy(&p->id, &x->id, sizeof(p->id)); memcpy(&p->sel, &x->sel, sizeof(p->sel)); memcpy(&p->lft, &x->lft, sizeof(p->lft)); -- cgit v0.10.2 From 7b789836f434c87168eab067cfbed1ec4783dffd Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:40 +0000 Subject: xfrm_user: fix info leak in copy_to_user_policy() The memory reserved to dump the xfrm policy includes multiple padding bytes added by the compiler for alignment (padding bytes in struct xfrm_selector and struct xfrm_userpolicy_info). Add an explicit memset(0) before filling the buffer to avoid the heap info leak. Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index d585459..84dd85c 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1320,6 +1320,7 @@ static void copy_from_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy static void copy_to_user_policy(struct xfrm_policy *xp, struct xfrm_userpolicy_info *p, int dir) { + memset(p, 0, sizeof(*p)); memcpy(&p->sel, &xp->selector, sizeof(p->sel)); memcpy(&p->lft, &xp->lft, sizeof(p->lft)); memcpy(&p->curlft, &xp->curlft, sizeof(p->curlft)); -- cgit v0.10.2 From 1f86840f897717f86d523a13e99a447e6a5d2fa5 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:41 +0000 Subject: xfrm_user: fix info leak in copy_to_user_tmpl() The memory used for the template copy is a local stack variable. As struct xfrm_user_tmpl contains multiple holes added by the compiler for alignment, not initializing the memory will lead to leaking stack bytes to userland. Add an explicit memset(0) to avoid the info leak. Initial version of the patch by Brad Spengler. Cc: Brad Spengler Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 84dd85c..8024b3d 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1425,6 +1425,7 @@ static int copy_to_user_tmpl(struct xfrm_policy *xp, struct sk_buff *skb) struct xfrm_user_tmpl *up = &vec[i]; struct xfrm_tmpl *kp = &xp->xfrm_vec[i]; + memset(up, 0, sizeof(*up)); memcpy(&up->id, &kp->id, sizeof(up->id)); up->family = kp->encap_family; memcpy(&up->saddr, &kp->saddr, sizeof(up->saddr)); -- cgit v0.10.2 From ecd7918745234e423dd87fcc0c077da557909720 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Thu, 20 Sep 2012 10:01:49 +0000 Subject: xfrm_user: ensure user supplied esn replay window is valid The current code fails to ensure that the netlink message actually contains as many bytes as the header indicates. If a user creates a new state or updates an existing one but does not supply the bytes for the whole ESN replay window, the kernel copies random heap bytes into the replay bitmap, the ones happen to follow the XFRMA_REPLAY_ESN_VAL netlink attribute. This leads to following issues: 1. The replay window has random bits set confusing the replay handling code later on. 2. A malicious user could use this flaw to leak up to ~3.5kB of heap memory when she has access to the XFRM netlink interface (requires CAP_NET_ADMIN). Known users of the ESN replay window are strongSwan and Steffen's iproute2 patch (). The latter uses the interface with a bitmap supplied while the former does not. strongSwan is therefore prone to run into issue 1. To fix both issues without breaking existing userland allow using the XFRMA_REPLAY_ESN_VAL netlink attribute with either an empty bitmap or a fully specified one. For the former case we initialize the in-kernel bitmap with zero, for the latter we copy the user supplied bitmap. For state updates the full bitmap must be supplied. To prevent overflows in the bitmap length calculation the maximum size of bmp_len is limited to 128 by this patch -- resulting in a maximum replay window of 4096 packets. This should be sufficient for all real life scenarios (RFC 4303 recommends a default replay window size of 64). Cc: Steffen Klassert Cc: Martin Willi Cc: Ben Hutchings Signed-off-by: Mathias Krause Signed-off-by: David S. Miller diff --git a/include/linux/xfrm.h b/include/linux/xfrm.h index 22e61fd..28e493b 100644 --- a/include/linux/xfrm.h +++ b/include/linux/xfrm.h @@ -84,6 +84,8 @@ struct xfrm_replay_state { __u32 bitmap; }; +#define XFRMA_REPLAY_ESN_MAX 4096 + struct xfrm_replay_state_esn { unsigned int bmp_len; __u32 oseq; diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 8024b3d..5927065 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -123,9 +123,21 @@ static inline int verify_replay(struct xfrm_usersa_info *p, struct nlattr **attrs) { struct nlattr *rt = attrs[XFRMA_REPLAY_ESN_VAL]; + struct xfrm_replay_state_esn *rs; - if ((p->flags & XFRM_STATE_ESN) && !rt) - return -EINVAL; + if (p->flags & XFRM_STATE_ESN) { + if (!rt) + return -EINVAL; + + rs = nla_data(rt); + + if (rs->bmp_len > XFRMA_REPLAY_ESN_MAX / sizeof(rs->bmp[0]) / 8) + return -EINVAL; + + if (nla_len(rt) < xfrm_replay_state_esn_len(rs) && + nla_len(rt) != sizeof(*rs)) + return -EINVAL; + } if (!rt) return 0; @@ -370,14 +382,15 @@ static inline int xfrm_replay_verify_len(struct xfrm_replay_state_esn *replay_es struct nlattr *rp) { struct xfrm_replay_state_esn *up; + int ulen; if (!replay_esn || !rp) return 0; up = nla_data(rp); + ulen = xfrm_replay_state_esn_len(up); - if (xfrm_replay_state_esn_len(replay_esn) != - xfrm_replay_state_esn_len(up)) + if (nla_len(rp) < ulen || xfrm_replay_state_esn_len(replay_esn) != ulen) return -EINVAL; return 0; @@ -388,22 +401,28 @@ static int xfrm_alloc_replay_state_esn(struct xfrm_replay_state_esn **replay_esn struct nlattr *rta) { struct xfrm_replay_state_esn *p, *pp, *up; + int klen, ulen; if (!rta) return 0; up = nla_data(rta); + klen = xfrm_replay_state_esn_len(up); + ulen = nla_len(rta) >= klen ? klen : sizeof(*up); - p = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL); + p = kzalloc(klen, GFP_KERNEL); if (!p) return -ENOMEM; - pp = kmemdup(up, xfrm_replay_state_esn_len(up), GFP_KERNEL); + pp = kzalloc(klen, GFP_KERNEL); if (!pp) { kfree(p); return -ENOMEM; } + memcpy(p, up, ulen); + memcpy(pp, up, ulen); + *replay_esn = p; *preplay_esn = pp; -- cgit v0.10.2 From e3ac104d41a97b42316915020ba228c505447d21 Mon Sep 17 00:00:00 2001 From: Mathias Krause Date: Wed, 19 Sep 2012 11:33:43 +0000 Subject: xfrm_user: don't copy esn replay window twice for new states The ESN replay window was already fully initialized in xfrm_alloc_replay_state_esn(). No need to copy it again. Cc: Steffen Klassert Signed-off-by: Mathias Krause Acked-by: Steffen Klassert Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 5927065..289f4bf 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -461,10 +461,11 @@ static void copy_from_user_state(struct xfrm_state *x, struct xfrm_usersa_info * * somehow made shareable and move it to xfrm_state.c - JHS * */ -static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs) +static void xfrm_update_ae_params(struct xfrm_state *x, struct nlattr **attrs, + int update_esn) { struct nlattr *rp = attrs[XFRMA_REPLAY_VAL]; - struct nlattr *re = attrs[XFRMA_REPLAY_ESN_VAL]; + struct nlattr *re = update_esn ? attrs[XFRMA_REPLAY_ESN_VAL] : NULL; struct nlattr *lt = attrs[XFRMA_LTIME_VAL]; struct nlattr *et = attrs[XFRMA_ETIMER_THRESH]; struct nlattr *rt = attrs[XFRMA_REPLAY_THRESH]; @@ -574,7 +575,7 @@ static struct xfrm_state *xfrm_state_construct(struct net *net, goto error; /* override default values from above */ - xfrm_update_ae_params(x, attrs); + xfrm_update_ae_params(x, attrs, 0); return x; @@ -1848,7 +1849,7 @@ static int xfrm_new_ae(struct sk_buff *skb, struct nlmsghdr *nlh, goto out; spin_lock_bh(&x->lock); - xfrm_update_ae_params(x, attrs); + xfrm_update_ae_params(x, attrs, 1); spin_unlock_bh(&x->lock); c.event = nlh->nlmsg_type; -- cgit v0.10.2 From 3cfc1590107a155218c97df0db3eb0a2bd7fda16 Mon Sep 17 00:00:00 2001 From: Devendra Naga Date: Wed, 19 Sep 2012 21:04:36 +0000 Subject: at91ether: return PTR_ERR if call to clk_get fails we are currently returning ENODEV, as the clk_get may give a exact error code in its returned pointer, assign it to the ret by using the PTR_ERR function, so that the subsequent goto label will jump to the error path and clean the driver and return the error correctly. Signed-off-by: Devendra Naga Acked-by: Nicolas Ferre Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/cadence/at91_ether.c b/drivers/net/ethernet/cadence/at91_ether.c index 7788419..4e980a7 100644 --- a/drivers/net/ethernet/cadence/at91_ether.c +++ b/drivers/net/ethernet/cadence/at91_ether.c @@ -1086,7 +1086,7 @@ static int __init at91ether_probe(struct platform_device *pdev) /* Clock */ lp->ether_clk = clk_get(&pdev->dev, "ether_clk"); if (IS_ERR(lp->ether_clk)) { - res = -ENODEV; + res = PTR_ERR(lp->ether_clk); goto err_ioumap; } clk_enable(lp->ether_clk); -- cgit v0.10.2 From 8babe8cc6570ed896b7b596337eb8fe730c3ff45 Mon Sep 17 00:00:00 2001 From: Ed Cashin Date: Wed, 19 Sep 2012 15:46:39 +0000 Subject: aoe: assert AoE packets marked as requiring no checksum In order for the network layer to see that AoE requires no checksumming in a generic way, the packets must be marked as requiring no checksum, so we make this requirement explicit with the assertion. Signed-off-by: Ed Cashin Signed-off-by: David S. Miller diff --git a/drivers/block/aoe/aoecmd.c b/drivers/block/aoe/aoecmd.c index de0435e..887f68f 100644 --- a/drivers/block/aoe/aoecmd.c +++ b/drivers/block/aoe/aoecmd.c @@ -35,6 +35,7 @@ new_skb(ulong len) skb_reset_mac_header(skb); skb_reset_network_header(skb); skb->protocol = __constant_htons(ETH_P_AOE); + skb_checksum_none_assert(skb); } return skb; } -- cgit v0.10.2 From c0d680e577ff171e7b37dbdb1b1bf5451e851f04 Mon Sep 17 00:00:00 2001 From: Ed Cashin Date: Wed, 19 Sep 2012 15:49:00 +0000 Subject: net: do not disable sg for packets requiring no checksum A change in a series of VLAN-related changes appears to have inadvertently disabled the use of the scatter gather feature of network cards for transmission of non-IP ethernet protocols like ATA over Ethernet (AoE). Below is a reference to the commit that introduces a "harmonize_features" function that turns off scatter gather when the NIC does not support hardware checksumming for the ethernet protocol of an sk buff. commit f01a5236bd4b140198fbcc550f085e8361fd73fa Author: Jesse Gross Date: Sun Jan 9 06:23:31 2011 +0000 net offloading: Generalize netif_get_vlan_features(). The can_checksum_protocol function is not equipped to consider a protocol that does not require checksumming. Calling it for a protocol that requires no checksum is inappropriate. The patch below has harmonize_features call can_checksum_protocol when the protocol needs a checksum, so that the network layer is not forced to perform unnecessary skb linearization on the transmission of AoE packets. Unnecessary linearization results in decreased performance and increased memory pressure, as reported here: http://www.spinics.net/lists/linux-mm/msg15184.html The problem has probably not been widely experienced yet, because only recently has the kernel.org-distributed aoe driver acquired the ability to use payloads of over a page in size, with the patchset recently included in the mm tree: https://lkml.org/lkml/2012/8/28/140 The coraid.com-distributed aoe driver already could use payloads of greater than a page in size, but its users generally do not use the newest kernels. Signed-off-by: Ed Cashin Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index ac7609d..89e33a5 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2134,7 +2134,8 @@ static bool can_checksum_protocol(netdev_features_t features, __be16 protocol) static netdev_features_t harmonize_features(struct sk_buff *skb, __be16 protocol, netdev_features_t features) { - if (!can_checksum_protocol(features, protocol)) { + if (skb->ip_summed != CHECKSUM_NONE && + !can_checksum_protocol(features, protocol)) { features &= ~NETIF_F_ALL_CSUM; features &= ~NETIF_F_SG; } else if (illegal_highdma(skb->dev, skb)) { -- cgit v0.10.2 From 6c06d608ec244d9b030f16ce9088b4456197e1cb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 21 Sep 2012 09:19:50 -0400 Subject: drm/nouveau: add dmi quirk for gpio reset This fixes the gpio reset problem so the Retina MBP works, but avoids breaking the Dell systems. Ben will work on a better solution for 3.7. Tested by me on retina MBP. Signed-off-by: Dave Airlie diff --git a/drivers/gpu/drm/nouveau/nv50_gpio.c b/drivers/gpu/drm/nouveau/nv50_gpio.c index f429e6a..c399d51 100644 --- a/drivers/gpu/drm/nouveau/nv50_gpio.c +++ b/drivers/gpu/drm/nouveau/nv50_gpio.c @@ -22,6 +22,7 @@ * Authors: Ben Skeggs */ +#include #include "drmP.h" #include "nouveau_drv.h" #include "nouveau_hw.h" @@ -110,11 +111,26 @@ nv50_gpio_isr(struct drm_device *dev) nv_wr32(dev, 0xe074, intr1); } +static struct dmi_system_id gpio_reset_ids[] = { + { + .ident = "Apple Macbook 10,1", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."), + DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro10,1"), + } + }, + { } +}; + int nv50_gpio_init(struct drm_device *dev) { struct drm_nouveau_private *dev_priv = dev->dev_private; + /* initialise gpios and routing to vbios defaults */ + if (dmi_check_system(gpio_reset_ids)) + nouveau_gpio_reset(dev); + /* disable, and ack any pending gpio interrupts */ nv_wr32(dev, 0xe050, 0x00000000); nv_wr32(dev, 0xe054, 0xffffffff); -- cgit v0.10.2 From e21093ef6fb4cbecdf926102286dbe280ae965db Mon Sep 17 00:00:00 2001 From: "Ira W. Snyder" Date: Tue, 11 Sep 2012 15:58:15 -0700 Subject: can: janz-ican3: fix support for older hardware revisions The Revision 1.0 Janz CMOD-IO Carrier Board does not have support for the reset registers. To support older hardware, the code is changed to use the hardware reset register on the Janz VMOD-ICAN3 hardware itself. Cc: stable Signed-off-by: Ira W. Snyder Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/janz-ican3.c b/drivers/net/can/janz-ican3.c index 98ee438..7edadee 100644 --- a/drivers/net/can/janz-ican3.c +++ b/drivers/net/can/janz-ican3.c @@ -1391,7 +1391,6 @@ static irqreturn_t ican3_irq(int irq, void *dev_id) */ static int ican3_reset_module(struct ican3_dev *mod) { - u8 val = 1 << mod->num; unsigned long start; u8 runold, runnew; @@ -1405,8 +1404,7 @@ static int ican3_reset_module(struct ican3_dev *mod) runold = ioread8(mod->dpm + TARGET_RUNNING); /* reset the module */ - iowrite8(val, &mod->ctrl->reset_assert); - iowrite8(val, &mod->ctrl->reset_deassert); + iowrite8(0x00, &mod->dpmctrl->hwreset); /* wait until the module has finished resetting and is running */ start = jiffies; -- cgit v0.10.2 From ab04c8bd423edb03e2148350a091836c196107fc Mon Sep 17 00:00:00 2001 From: Marc Kleine-Budde Date: Wed, 19 Sep 2012 14:58:45 +0200 Subject: can: ti_hecc: fix oops during rmmod This patch fixes an oops which occurs when unloading the driver, while the network interface is still up. The problem is that first the io mapping is teared own, then the CAN device is unregistered, resulting in accessing the hardware's iomem: [ 172.744232] Unable to handle kernel paging request at virtual address c88b0040 [ 172.752441] pgd = c7be4000 [ 172.755645] [c88b0040] *pgd=87821811, *pte=00000000, *ppte=00000000 [ 172.762207] Internal error: Oops: 807 [#1] PREEMPT ARM [ 172.767517] Modules linked in: ti_hecc(-) can_dev [ 172.772430] CPU: 0 Not tainted (3.5.0alpha-00037-g3554cc0 #126) [ 172.778961] PC is at ti_hecc_close+0xb0/0x100 [ti_hecc] [ 172.784423] LR is at __dev_close_many+0x90/0xc0 [ 172.789123] pc : [] lr : [] psr: 60000013 [ 172.789123] sp : c5c1de68 ip : 00040081 fp : 00000000 [ 172.801025] r10: 00000001 r9 : c5c1c000 r8 : 00100100 [ 172.806457] r7 : c5d0a48c r6 : c5d0a400 r5 : 00000000 r4 : c5d0a000 [ 172.813232] r3 : c88b0000 r2 : 00000001 r1 : c5d0a000 r0 : c5d0a000 [ 172.820037] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 172.827423] Control: 10c5387d Table: 87be4019 DAC: 00000015 [ 172.833404] Process rmmod (pid: 600, stack limit = 0xc5c1c2f0) [ 172.839447] Stack: (0xc5c1de68 to 0xc5c1e000) [ 172.843994] de60: bf00c6b8 c5c1dec8 c5d0a000 c5d0a000 00200200 c033be58 [ 172.852478] de80: c5c1de44 c5c1dec8 c5c1dec8 c033bf2c c5c1de90 c5c1de90 c5d0a084 c5c1de44 [ 172.860992] dea0: c5c1dec8 c033c098 c061d3dc c5d0a000 00000000 c05edf28 c05edb34 c000d724 [ 172.869476] dec0: 00000000 c033c2f8 c5d0a084 c5d0a084 00000000 c033c370 00000000 c5d0a000 [ 172.877990] dee0: c05edb00 c033c3b8 c5d0a000 bf00d3ac c05edb00 bf00d7c8 bf00d7c8 c02842dc [ 172.886474] df00: c02842c8 c0282f90 c5c1c000 c05edb00 bf00d7c8 c0283668 bf00d7c8 00000000 [ 172.894989] df20: c0611f98 befe2f80 c000d724 c0282d10 bf00d804 00000000 00000013 c0068a8c [ 172.903472] df40: c5c538e8 685f6974 00636365 c61571a8 c5cb9980 c61571a8 c6158a20 c00c9bc4 [ 172.911987] df60: 00000000 00000000 c5cb9980 00000000 c5cb9980 00000000 c7823680 00000006 [ 172.920471] df80: bf00d804 00000880 c5c1df8c 00000000 000d4267 befe2f80 00000001 b6d90068 [ 172.928985] dfa0: 00000081 c000d5a0 befe2f80 00000001 befe2f80 00000880 b6d90008 00000008 [ 172.937469] dfc0: befe2f80 00000001 b6d90068 00000081 00000001 00000000 befe2eac 00000000 [ 172.945983] dfe0: 00000000 befe2b18 00023ba4 b6e6addc 60000010 befe2f80 a8e00190 86d2d344 [ 172.954498] [] (ti_hecc_close+0xb0/0x100 [ti_hecc]) from [] (__dev__registered_many+0xc0/0x2a0) [ 172.984161] [] (rollback_registered_many+0xc0/0x2a0) from [] (rollback_registered+0x20/0x30) [ 172.994750] [] (rollback_registered+0x20/0x30) from [] (unregister_netdevice_queue+0x68/0x98) [ 173.005401] [] (unregister_netdevice_queue+0x68/0x98) from [] (unregister_netdev+0x18/0x20) [ 173.015899] [] (unregister_netdev+0x18/0x20) from [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) [ 173.026245] [] (ti_hecc_remove+0x60/0x80 [ti_hecc]) from [] (platform_drv_remove+0x14/0x18) [ 173.036712] [] (platform_drv_remove+0x14/0x18) from [] (__device_release_driver+0x7c/0xbc) Cc: stable Cc: Anant Gole Tested-by: Jan Luebbe Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index 527dbcf..9ded21e 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -984,12 +984,12 @@ static int __devexit ti_hecc_remove(struct platform_device *pdev) struct net_device *ndev = platform_get_drvdata(pdev); struct ti_hecc_priv *priv = netdev_priv(ndev); + unregister_candev(ndev); clk_disable(priv->clk); clk_put(priv->clk); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); iounmap(priv->base); release_mem_region(res->start, resource_size(res)); - unregister_candev(ndev); free_candev(ndev); platform_set_drvdata(pdev, NULL); -- cgit v0.10.2 From c1c1a59e37dab22951e25753de0bdf6b9272a4ea Mon Sep 17 00:00:00 2001 From: Mark Asselstine Date: Wed, 19 Sep 2012 16:30:44 -0400 Subject: firmware: fix directory creation rule matching with make 3.80 Since make 3.80 doesn't support secondary expansion it uses a fallback rule to create firmware directories which is matched after primary expansion of the $(installed-fw) rule's prerequisite. Commit 6c7080a61fc7 [firmware: fix directory creation rule matching with make 3.82] changed the expression generated after primary expansion such that the fallback was not matched. Updating the fallback rule to match the new look primary expansion is not an option for various reasons. The trailing slash added here to $(INSTALL_FW_PATH)/. while defining installed-fw-dirs fixes builds with make 3.82 since this will provide a matching rule for $(INSTALL_FW_PATH)/$$(dir %) when % is in the base firmware directory (ie. $(dir %) gives './'). Versions of make prior to 3.82 will strip this trailing slash along with the one generated by $(dir %) when % is in the base firmware directory and as such continue to function as before. Signed-off-by: Mark Asselstine Tested-by: Jan Beulich Signed-off-by: Michal Marek diff --git a/scripts/Makefile.fwinst b/scripts/Makefile.fwinst index c3f69ae..4d908d1 100644 --- a/scripts/Makefile.fwinst +++ b/scripts/Makefile.fwinst @@ -27,7 +27,7 @@ endif installed-mod-fw := $(addprefix $(INSTALL_FW_PATH)/,$(mod-fw)) installed-fw := $(addprefix $(INSTALL_FW_PATH)/,$(fw-shipped-all)) -installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/. +installed-fw-dirs := $(sort $(dir $(installed-fw))) $(INSTALL_FW_PATH)/./ # Workaround for make < 3.81, where .SECONDEXPANSION doesn't work. PHONY += $(INSTALL_FW_PATH)/$$(%) install-all-dirs @@ -42,7 +42,7 @@ quiet_cmd_install = INSTALL $(subst $(srctree)/,,$@) $(installed-fw-dirs): $(call cmd,mkdir) -$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $$(dir $(INSTALL_FW_PATH)/%) +$(installed-fw): $(INSTALL_FW_PATH)/%: $(obj)/% | $(INSTALL_FW_PATH)/$$(dir %) $(call cmd,install) PHONY += __fw_install __fw_modinst FORCE -- cgit v0.10.2 From 24cc7fb69a5b5edfdff1d38c6a213d6a33648829 Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 20 Sep 2012 10:28:45 -0400 Subject: x86/kbuild: archscripts depends on scripts_basic While building the SUSE kernel packages, which build the scripts, make clean, and then build everything, we have been running into spurious build failures. We tracked them down to a simple dependency issue: $ make mrproper CLEAN arch/x86/tools CLEAN scripts/basic $ cp patches/config/x86_64/desktop .config $ make archscripts HOSTCC arch/x86/tools/relocs /bin/sh: scripts/basic/fixdep: No such file or directory make[3]: *** [arch/x86/tools/relocs] Error 1 make[2]: *** [archscripts] Error 2 make[1]: *** [sub-make] Error 2 make: *** [all] Error 2 This was introduced by commit 6520fe55 (x86, realmode: 16-bit real-mode code support for relocs), which added the archscripts dependency to archprepare. This patch adds the scripts_basic dependency to the x86 archscripts. Signed-off-by: Jeff Mahoney Signed-off-by: Michal Marek diff --git a/arch/x86/Makefile b/arch/x86/Makefile index b0c5276..c098ca4 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -138,7 +138,7 @@ KBUILD_CFLAGS += $(call cc-option,-mno-avx,) KBUILD_CFLAGS += $(mflags-y) KBUILD_AFLAGS += $(mflags-y) -archscripts: +archscripts: scripts_basic $(Q)$(MAKE) $(build)=arch/x86/tools relocs ### -- cgit v0.10.2 From bf619faeced5c2beb32a39559e1f1117f88fd702 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 21 Sep 2012 17:55:20 +0100 Subject: ARM: reserve syscall 378 for kcmp kcmp has appeared on x86, but has not been noticed because checksyscalls.sh is broken at the moment. Reserve ARM syscall 378 for this should we ever need it, and add an __IGNORE entry for this unimplemented syscall. Signed-off-by: Russell King diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 0cab47d..2fde5fd 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -404,6 +404,7 @@ #define __NR_setns (__NR_SYSCALL_BASE+375) #define __NR_process_vm_readv (__NR_SYSCALL_BASE+376) #define __NR_process_vm_writev (__NR_SYSCALL_BASE+377) + /* 378 for kcmp */ /* * The following SWIs are ARM private. @@ -483,6 +484,7 @@ */ #define __IGNORE_fadvise64_64 #define __IGNORE_migrate_pages +#define __IGNORE_kcmp #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 463ff4a..e337879 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -387,6 +387,7 @@ /* 375 */ CALL(sys_setns) CALL(sys_process_vm_readv) CALL(sys_process_vm_writev) + CALL(sys_ni_syscall) /* reserved for sys_kcmp */ #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted -- cgit v0.10.2 From 185d4c8bf579322e1c2835d70729bc30f6f80f55 Mon Sep 17 00:00:00 2001 From: Ariel Elior Date: Thu, 20 Sep 2012 05:26:41 +0000 Subject: bnx2x: remove false warning regarding interrupt number Since version 7.4 the FW configures in the pci config space the max number of interrupts available to the physical function, instead of the exact number to use. This causes a false warning in driver when comparing the number of configured interrupts to the number about to be used. Signed-off-by: Ariel Elior Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 211753e..0875ecf 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -9831,12 +9831,13 @@ static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp) } #ifdef CONFIG_PCI_MSI - /* - * It's expected that number of CAM entries for this functions is equal - * to the number evaluated based on the MSI-X table size. We want a - * harsh warning if these values are different! + /* Due to new PF resource allocation by MFW T7.4 and above, it's + * optional that number of CAM entries will not be equal to the value + * advertised in PCI. + * Driver should use the minimal value of both as the actual status + * block count */ - WARN_ON(bp->igu_sb_cnt != igu_sb_cnt); + bp->igu_sb_cnt = min_t(int, bp->igu_sb_cnt, igu_sb_cnt); #endif if (igu_sb_cnt == 0) -- cgit v0.10.2 From 36048853c5257a7b6df346b83758ffa776a59e9f Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 21 Sep 2012 02:16:29 -0700 Subject: debugfs: fix race in u32_array_read and allocate array at open u32_array_open() is racy when multiple threads read from a file with a seek position of zero, i.e. when two or more simultaneous reads are occurring after the non-seekable files are created. It is possible that file->private_data is double-freed because the threads races between kfree(file->private-data); and file->private_data = NULL; The fix is to only do format_array_alloc() when the file is opened and free it when it is closed. Note that because the file has always been non-seekable, you can't open it and read it multiple times anyway, so the data has always been generated just once. The difference is that now it is generated at open time rather than at the time of the first read, and that avoids the race. Reported-by: Dave Jones Acked-by: Konrad Rzeszutek Wilk Tested-by: Raghavendra Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index 2340f69..a09d3c0 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -526,12 +526,6 @@ struct array_data { u32 elements; }; -static int u32_array_open(struct inode *inode, struct file *file) -{ - file->private_data = NULL; - return nonseekable_open(inode, file); -} - static size_t format_array(char *buf, size_t bufsize, const char *fmt, u32 *array, u32 array_size) { @@ -573,26 +567,21 @@ static char *format_array_alloc(const char *fmt, u32 *array, return ret; } -static ssize_t u32_array_read(struct file *file, char __user *buf, size_t len, - loff_t *ppos) +static int u32_array_open(struct inode *inode, struct file *file) { - struct inode *inode = file->f_path.dentry->d_inode; struct array_data *data = inode->i_private; - size_t size; - if (*ppos == 0) { - if (file->private_data) { - kfree(file->private_data); - file->private_data = NULL; - } - - file->private_data = format_array_alloc("%u", data->array, - data->elements); - } + file->private_data = format_array_alloc("%u", data->array, + data->elements); + if (!file->private_data) + return -ENOMEM; + return nonseekable_open(inode, file); +} - size = 0; - if (file->private_data) - size = strlen(file->private_data); +static ssize_t u32_array_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos) +{ + size_t size = strlen(file->private_data); return simple_read_from_buffer(buf, len, ppos, file->private_data, size); -- cgit v0.10.2 From f950c0ecc78f745e490d615280e031de4dbb1306 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 18:29:56 +0000 Subject: ipv6: fix return value check in fib6_add() In case of error, the function fib6_add_1() returns ERR_PTR() or NULL pointer. The ERR_PTR() case check is missing in fib6_add(). dpatch engine is used to generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/net/ipv6/ip6_fib.c b/net/ipv6/ip6_fib.c index 13690d6..286acfc 100644 --- a/net/ipv6/ip6_fib.c +++ b/net/ipv6/ip6_fib.c @@ -819,6 +819,10 @@ int fib6_add(struct fib6_node *root, struct rt6_info *rt, struct nl_info *info) offsetof(struct rt6_info, rt6i_src), allow_create, replace_required); + if (IS_ERR(sn)) { + err = PTR_ERR(sn); + sn = NULL; + } if (!sn) { /* If it is failed, discard just allocated root, and then (in st_failure) stale node -- cgit v0.10.2 From 28889b7e7818342f6c254e27b9b2c68702ab867a Mon Sep 17 00:00:00 2001 From: Richard Cochran Date: Thu, 20 Sep 2012 19:11:12 +0000 Subject: gianfar: fix phc index build failure This patch fixes a build failure introduced in commit 66636287 ("gianfar: Support the get_ts_info ethtool method."). Not only was a global variable inconsistently named, but also it was not exported as it should have been. This fix is also needed in stable version 3.5. Signed-off-by: Richard Cochran Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/freescale/gianfar_ethtool.c b/drivers/net/ethernet/freescale/gianfar_ethtool.c index 8971921..ab6762c 100644 --- a/drivers/net/ethernet/freescale/gianfar_ethtool.c +++ b/drivers/net/ethernet/freescale/gianfar_ethtool.c @@ -1773,6 +1773,7 @@ static int gfar_get_nfc(struct net_device *dev, struct ethtool_rxnfc *cmd, } int gfar_phc_index = -1; +EXPORT_SYMBOL(gfar_phc_index); static int gfar_get_ts_info(struct net_device *dev, struct ethtool_ts_info *info) diff --git a/drivers/net/ethernet/freescale/gianfar_ptp.c b/drivers/net/ethernet/freescale/gianfar_ptp.c index c08e5d4..0daa66b 100644 --- a/drivers/net/ethernet/freescale/gianfar_ptp.c +++ b/drivers/net/ethernet/freescale/gianfar_ptp.c @@ -515,7 +515,7 @@ static int gianfar_ptp_probe(struct platform_device *dev) err = PTR_ERR(etsects->clock); goto no_clock; } - gfar_phc_clock = ptp_clock_index(etsects->clock); + gfar_phc_index = ptp_clock_index(etsects->clock); dev_set_drvdata(&dev->dev, etsects); @@ -539,7 +539,7 @@ static int gianfar_ptp_remove(struct platform_device *dev) gfar_write(&etsects->regs->tmr_temask, 0); gfar_write(&etsects->regs->tmr_ctrl, 0); - gfar_phc_clock = -1; + gfar_phc_index = -1; ptp_clock_unregister(etsects->clock); iounmap(etsects->regs); release_resource(etsects->rsrc); -- cgit v0.10.2 From 6861509f9fee9c5e568c5f6852bb96f2475b4179 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 21:06:10 +0000 Subject: stmmac: fix return value check in stmmac_open_ext_timer() In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c index 2a0e1ab..197fb8c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c @@ -109,7 +109,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) { timer_clock = clk_get(NULL, TMU_CHANNEL); - if (timer_clock == NULL) + if (IS_ERR(timer_clock)) return -1; if (tmu2_register_user(stmmac_timer_handler, (void *)dev) < 0) { -- cgit v0.10.2 From dc9c9759ebc65d886453c335b2b5be39f87ab01e Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 21:13:55 +0000 Subject: net/irda: sh_sir: fix return value check in sh_sir_set_baudrate() In case of error, the function clk_get() returns ERR_PTR() and never returns NULL pointer. The NULL test in the error handling should be replaced with IS_ERR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/drivers/net/irda/sh_sir.c b/drivers/net/irda/sh_sir.c index 256eddf..7951094 100644 --- a/drivers/net/irda/sh_sir.c +++ b/drivers/net/irda/sh_sir.c @@ -280,7 +280,7 @@ static int sh_sir_set_baudrate(struct sh_sir_self *self, u32 baudrate) } clk = clk_get(NULL, "irda_clk"); - if (!clk) { + if (IS_ERR(clk)) { dev_err(dev, "can not get irda_clk\n"); return -EIO; } -- cgit v0.10.2 From bf5b30b8a4416de04f1ac1196281ddb318669464 Mon Sep 17 00:00:00 2001 From: Zhao Hongjiang Date: Thu, 20 Sep 2012 22:37:25 +0000 Subject: net: change return values from -EACCES to -EPERM Change return value from -EACCES to -EPERM when the permission check fails. Signed-off-by: Zhao Hongjiang Signed-off-by: David S. Miller diff --git a/net/bluetooth/bnep/sock.c b/net/bluetooth/bnep/sock.c index 5e5f5b4..1eaacf1 100644 --- a/net/bluetooth/bnep/sock.c +++ b/net/bluetooth/bnep/sock.c @@ -58,7 +58,7 @@ static int bnep_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long switch (cmd) { case BNEPCONNADD: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&ca, argp, sizeof(ca))) return -EFAULT; @@ -84,7 +84,7 @@ static int bnep_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long case BNEPCONNDEL: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&cd, argp, sizeof(cd))) return -EFAULT; diff --git a/net/bluetooth/cmtp/sock.c b/net/bluetooth/cmtp/sock.c index 311668d..32dc83d 100644 --- a/net/bluetooth/cmtp/sock.c +++ b/net/bluetooth/cmtp/sock.c @@ -72,7 +72,7 @@ static int cmtp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long switch (cmd) { case CMTPCONNADD: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&ca, argp, sizeof(ca))) return -EFAULT; @@ -97,7 +97,7 @@ static int cmtp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long case CMTPCONNDEL: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&cd, argp, sizeof(cd))) return -EFAULT; diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 19fdac7..d5ace1e 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -490,7 +490,7 @@ static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd, switch (cmd) { case HCISETRAW: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) return -EPERM; @@ -510,12 +510,12 @@ static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd, case HCIBLOCKADDR: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_sock_blacklist_add(hdev, (void __user *) arg); case HCIUNBLOCKADDR: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_sock_blacklist_del(hdev, (void __user *) arg); default: @@ -546,22 +546,22 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, case HCIDEVUP: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_open(arg); case HCIDEVDOWN: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_close(arg); case HCIDEVRESET: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_reset(arg); case HCIDEVRESTAT: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_reset_stat(arg); case HCISETSCAN: @@ -573,7 +573,7 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, case HCISETACLMTU: case HCISETSCOMTU: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; return hci_dev_cmd(cmd, argp); case HCIINQUIRY: diff --git a/net/bluetooth/hidp/sock.c b/net/bluetooth/hidp/sock.c index 18b3f68..b24fb3b 100644 --- a/net/bluetooth/hidp/sock.c +++ b/net/bluetooth/hidp/sock.c @@ -56,7 +56,7 @@ static int hidp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long switch (cmd) { case HIDPCONNADD: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&ca, argp, sizeof(ca))) return -EFAULT; @@ -91,7 +91,7 @@ static int hidp_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long case HIDPCONNDEL: if (!capable(CAP_NET_ADMIN)) - return -EACCES; + return -EPERM; if (copy_from_user(&cd, argp, sizeof(cd))) return -EFAULT; diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 9b55b6f..e12fad7 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -725,7 +725,7 @@ int devinet_ioctl(struct net *net, unsigned int cmd, void __user *arg) break; case SIOCSIFFLAGS: - ret = -EACCES; + ret = -EPERM; if (!capable(CAP_NET_ADMIN)) goto out; break; @@ -733,7 +733,7 @@ int devinet_ioctl(struct net *net, unsigned int cmd, void __user *arg) case SIOCSIFBRDADDR: /* Set the broadcast address */ case SIOCSIFDSTADDR: /* Set the destination address */ case SIOCSIFNETMASK: /* Set the netmask for the interface */ - ret = -EACCES; + ret = -EPERM; if (!capable(CAP_NET_ADMIN)) goto out; ret = -EINVAL; diff --git a/net/netrom/af_netrom.c b/net/netrom/af_netrom.c index 1b9024e..7261eb8 100644 --- a/net/netrom/af_netrom.c +++ b/net/netrom/af_netrom.c @@ -601,7 +601,7 @@ static int nr_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) if (!capable(CAP_NET_BIND_SERVICE)) { dev_put(dev); release_sock(sk); - return -EACCES; + return -EPERM; } nr->user_addr = addr->fsa_digipeater[0]; nr->source_addr = addr->fsa_ax25.sax25_call; -- cgit v0.10.2 From e05e279e6fc940a2adb9d4d4bf2b814dfc286176 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 21 Sep 2012 11:48:05 -0700 Subject: debugfs: fix u32_array race in format_array_alloc The format_array_alloc() function is fundamentally racy, in that it prints the array twice: once to figure out how much space to allocate for the buffer, and the second time to actually print out the data. If any of the array contents changes in between, the allocation size may be wrong, and the end result may be truncated in odd ways. Just don't do it. Allocate a maximum-sized array up-front, and just format the array contents once. The only user of the u32_array interfaces is the Xen spinlock statistics code, and it has 31 entries in the arrays, so the maximum size really isn't that big, and the end result is much simpler code without the bug. Signed-off-by: Linus Torvalds diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index a09d3c0..c5ca6ae 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -526,55 +526,44 @@ struct array_data { u32 elements; }; -static size_t format_array(char *buf, size_t bufsize, const char *fmt, - u32 *array, u32 array_size) +static size_t u32_format_array(char *buf, size_t bufsize, + u32 *array, int array_size) { size_t ret = 0; - u32 i; - for (i = 0; i < array_size; i++) { + while (--array_size >= 0) { size_t len; + char term = array_size ? ' ' : '\n'; - len = snprintf(buf, bufsize, fmt, array[i]); - len++; /* ' ' or '\n' */ + len = snprintf(buf, bufsize, "%u%c", *array++, term); ret += len; - if (buf) { - buf += len; - bufsize -= len; - buf[-1] = (i == array_size-1) ? '\n' : ' '; - } + buf += len; + bufsize -= len; } - - ret++; /* \0 */ - if (buf) - *buf = '\0'; - - return ret; -} - -static char *format_array_alloc(const char *fmt, u32 *array, - u32 array_size) -{ - size_t len = format_array(NULL, 0, fmt, array, array_size); - char *ret; - - ret = kmalloc(len, GFP_KERNEL); - if (ret == NULL) - return NULL; - - format_array(ret, len, fmt, array, array_size); return ret; } static int u32_array_open(struct inode *inode, struct file *file) { struct array_data *data = inode->i_private; - - file->private_data = format_array_alloc("%u", data->array, - data->elements); - if (!file->private_data) + int size, elements = data->elements; + char *buf; + + /* + * Max size: + * - 10 digits + ' '/'\n' = 11 bytes per number + * - terminating NUL character + */ + size = elements*11; + buf = kmalloc(size+1, GFP_KERNEL); + if (!buf) return -ENOMEM; + buf[size] = 0; + + file->private_data = buf; + u32_format_array(buf, size, data->array, data->elements); + return nonseekable_open(inode, file); } -- cgit v0.10.2 From a630844d898ae8a0b4a3db84af061150682e0d3c Mon Sep 17 00:00:00 2001 From: Stefan Roese Date: Fri, 21 Sep 2012 01:06:29 +0000 Subject: net/stmmac: Use clk_prepare_enable and clk_disable_unprepare This patch fixes an issue introduced by commit ID 6a81c26f [net/stmmac: remove conditional compilation of clk code], which switched from the internal stmmac_clk_{en}{dis}able calls to clk_{en}{dis}able. By this, calling clk_prepare and clk_unprepare was removed. clk_{un}prepare is mandatory for platforms using common clock framework. Since these drivers are used by SPEAr platform, which supports common clock framework, add clk_{un}prepare() support for them. Otherwise the clocks are not correctly en-/disabled and ethernet support doesn't work. Signed-off-by: Stefan Roese Cc: Viresh Kumar Cc: Giuseppe Cavallaro Reviewed-by: Viresh Kumar Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index c136162..3be8833 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1066,7 +1066,7 @@ static int stmmac_open(struct net_device *dev) } else priv->tm->enable = 1; #endif - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); stmmac_check_ether_addr(priv); @@ -1188,7 +1188,7 @@ open_error: if (priv->phydev) phy_disconnect(priv->phydev); - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return ret; } @@ -1246,7 +1246,7 @@ static int stmmac_release(struct net_device *dev) #ifdef CONFIG_STMMAC_DEBUG_FS stmmac_exit_fs(); #endif - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); return 0; } @@ -2178,7 +2178,7 @@ int stmmac_suspend(struct net_device *ndev) else { stmmac_set_mac(priv->ioaddr, false); /* Disable clock in case of PWM is off */ - clk_disable(priv->stmmac_clk); + clk_disable_unprepare(priv->stmmac_clk); } spin_unlock_irqrestore(&priv->lock, flags); return 0; @@ -2203,7 +2203,7 @@ int stmmac_resume(struct net_device *ndev) priv->hw->mac->pmt(priv->ioaddr, 0); else /* enable the clk prevously disabled */ - clk_enable(priv->stmmac_clk); + clk_prepare_enable(priv->stmmac_clk); netif_device_attach(ndev); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c index 197fb8c..4ccd4e2 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_timer.c @@ -97,12 +97,12 @@ static struct clk *timer_clock; static void stmmac_tmu_start(unsigned int new_freq) { clk_set_rate(timer_clock, new_freq); - clk_enable(timer_clock); + clk_prepare_enable(timer_clock); } static void stmmac_tmu_stop(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); } int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) @@ -126,7 +126,7 @@ int stmmac_open_ext_timer(struct net_device *dev, struct stmmac_timer *tm) int stmmac_close_ext_timer(void) { - clk_disable(timer_clock); + clk_disable_unprepare(timer_clock); tmu2_unregister_user(); clk_put(timer_clock); return 0; -- cgit v0.10.2 From dfa520af2c20aa3c75f0497d49165561212a1c6f Mon Sep 17 00:00:00 2001 From: Andreas Larsson Date: Mon, 17 Sep 2012 19:59:52 +0000 Subject: sparc32: Enable the relocation target R_SPARC_DISP32 for sparc32 GNU Binutils 2.20.1 generates .eh_frame sections that uses R_SPARC_DISP32. Signed-off-by: Andreas Larsson Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index 15e0a16..bae6ab6 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -116,6 +116,10 @@ int apply_relocate_add(Elf_Shdr *sechdrs, v = sym->st_value + rel[i].r_addend; switch (ELF_R_TYPE(rel[i].r_info) & 0xff) { + case R_SPARC_DISP32: + v -= (Elf_Addr) location; + *loc32 = v; + break; #ifdef CONFIG_SPARC64 case R_SPARC_64: location[0] = v >> 56; @@ -128,11 +132,6 @@ int apply_relocate_add(Elf_Shdr *sechdrs, location[7] = v >> 0; break; - case R_SPARC_DISP32: - v -= (Elf_Addr) location; - *loc32 = v; - break; - case R_SPARC_WDISP19: v -= (Elf_Addr) location; *loc32 = (*loc32 & ~0x7ffff) | -- cgit v0.10.2 From a9e8d1a6b87167116e5779378f1d25ffed2e833b Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Thu, 20 Sep 2012 18:57:51 +0000 Subject: sparc: fix the return value of module_alloc() In case of error, function module_alloc() in other platform never returns ERR_PTR(), and all of the user only check for NULL, so we'd better return NULL instead of ERR_PTR(). dpatch engine is used to auto generated this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/module.c b/arch/sparc/kernel/module.c index bae6ab6..f1ddc0d 100644 --- a/arch/sparc/kernel/module.c +++ b/arch/sparc/kernel/module.c @@ -48,9 +48,7 @@ void *module_alloc(unsigned long size) return NULL; ret = module_map(size); - if (!ret) - ret = ERR_PTR(-ENOMEM); - else + if (ret) memset(ret, 0, size); return ret; -- cgit v0.10.2 From 391499801b1b31f39c8e8ac382ac97f5e3742934 Mon Sep 17 00:00:00 2001 From: Axel Lin Date: Thu, 13 Sep 2012 13:25:12 +0800 Subject: HID: lenovo-tpkbd: Fix memory leak in tpkbd_remove_tp() We need to kfree names for led_mute and led_micmute in tpkbd_remove_tp(). Signed-off-by: Axel Lin Acked-by: Bernhard Seibold Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-lenovo-tpkbd.c b/drivers/hid/hid-lenovo-tpkbd.c index 77d2df0..60c4e1e 100644 --- a/drivers/hid/hid-lenovo-tpkbd.c +++ b/drivers/hid/hid-lenovo-tpkbd.c @@ -519,6 +519,8 @@ static void tpkbd_remove_tp(struct hid_device *hdev) led_classdev_unregister(&data_pointer->led_mute); hid_set_drvdata(hdev, NULL); + kfree(data_pointer->led_micmute.name); + kfree(data_pointer->led_mute.name); kfree(data_pointer); } -- cgit v0.10.2 From 596264082f10dd4a567c43d4526b2f54ac5520bc Mon Sep 17 00:00:00 2001 From: Nestor Lopez Casado Date: Fri, 21 Sep 2012 12:21:34 +0200 Subject: HID: Fix logitech-dj: missing Unifying device issue This patch fixes an issue introduced after commit 4ea5454203d991ec ("HID: Fix race condition between driver core and ll-driver"). After that commit, hid-core discards any incoming packet that arrives while hid driver's probe function is being executed. This broke the enumeration process of hid-logitech-dj, that must receive control packets in-band with the mouse and keyboard packets. Discarding mouse or keyboard data at the very begining is usually fine, but it is not the case for control packets. This patch forces a re-enumeration of the paired devices when a packet arrives that comes from an unknown device. Based on a patch originally written by Benjamin Tissoires. Cc: stable@vger.kernel.org # v3.2+ Signed-off-by: Nestor Lopez Casado Signed-off-by: Jiri Kosina diff --git a/drivers/hid/hid-logitech-dj.c b/drivers/hid/hid-logitech-dj.c index 4d524b5..9500f2f 100644 --- a/drivers/hid/hid-logitech-dj.c +++ b/drivers/hid/hid-logitech-dj.c @@ -193,6 +193,7 @@ static struct hid_ll_driver logi_dj_ll_driver; static int logi_dj_output_hidraw_report(struct hid_device *hid, u8 * buf, size_t count, unsigned char report_type); +static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev); static void logi_dj_recv_destroy_djhid_device(struct dj_receiver_dev *djrcv_dev, struct dj_report *dj_report) @@ -233,6 +234,7 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, if (dj_report->report_params[DEVICE_PAIRED_PARAM_SPFUNCTION] & SPFUNCTION_DEVICE_LIST_EMPTY) { dbg_hid("%s: device list is empty\n", __func__); + djrcv_dev->querying_devices = false; return; } @@ -243,6 +245,12 @@ static void logi_dj_recv_add_djhid_device(struct dj_receiver_dev *djrcv_dev, return; } + if (djrcv_dev->paired_dj_devices[dj_report->device_index]) { + /* The device is already known. No need to reallocate it. */ + dbg_hid("%s: device is already known\n", __func__); + return; + } + dj_hiddev = hid_allocate_device(); if (IS_ERR(dj_hiddev)) { dev_err(&djrcv_hdev->dev, "%s: hid_allocate_device failed\n", @@ -306,6 +314,7 @@ static void delayedwork_callback(struct work_struct *work) struct dj_report dj_report; unsigned long flags; int count; + int retval; dbg_hid("%s\n", __func__); @@ -338,6 +347,25 @@ static void delayedwork_callback(struct work_struct *work) logi_dj_recv_destroy_djhid_device(djrcv_dev, &dj_report); break; default: + /* A normal report (i. e. not belonging to a pair/unpair notification) + * arriving here, means that the report arrived but we did not have a + * paired dj_device associated to the report's device_index, this + * means that the original "device paired" notification corresponding + * to this dj_device never arrived to this driver. The reason is that + * hid-core discards all packets coming from a device while probe() is + * executing. */ + if (!djrcv_dev->paired_dj_devices[dj_report.device_index]) { + /* ok, we don't know the device, just re-ask the + * receiver for the list of connected devices. */ + retval = logi_dj_recv_query_paired_devices(djrcv_dev); + if (!retval) { + /* everything went fine, so just leave */ + break; + } + dev_err(&djrcv_dev->hdev->dev, + "%s:logi_dj_recv_query_paired_devices " + "error:%d\n", __func__, retval); + } dbg_hid("%s: unexpected report type\n", __func__); } } @@ -368,6 +396,12 @@ static void logi_dj_recv_forward_null_report(struct dj_receiver_dev *djrcv_dev, if (!djdev) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -398,6 +432,12 @@ static void logi_dj_recv_forward_report(struct dj_receiver_dev *djrcv_dev, if (dj_device == NULL) { dbg_hid("djrcv_dev->paired_dj_devices[dj_report->device_index]" " is NULL, index %d\n", dj_report->device_index); + kfifo_in(&djrcv_dev->notif_fifo, dj_report, sizeof(struct dj_report)); + + if (schedule_work(&djrcv_dev->work) == 0) { + dbg_hid("%s: did not schedule the work item, was already " + "queued\n", __func__); + } return; } @@ -439,6 +479,10 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) struct dj_report *dj_report; int retval; + /* no need to protect djrcv_dev->querying_devices */ + if (djrcv_dev->querying_devices) + return 0; + dj_report = kzalloc(sizeof(struct dj_report), GFP_KERNEL); if (!dj_report) return -ENOMEM; @@ -450,6 +494,7 @@ static int logi_dj_recv_query_paired_devices(struct dj_receiver_dev *djrcv_dev) return retval; } + static int logi_dj_recv_switch_to_dj_mode(struct dj_receiver_dev *djrcv_dev, unsigned timeout) { diff --git a/drivers/hid/hid-logitech-dj.h b/drivers/hid/hid-logitech-dj.h index fd28a5e..4a40003 100644 --- a/drivers/hid/hid-logitech-dj.h +++ b/drivers/hid/hid-logitech-dj.h @@ -101,6 +101,7 @@ struct dj_receiver_dev { struct work_struct work; struct kfifo notif_fifo; spinlock_t lock; + bool querying_devices; }; struct dj_device { -- cgit v0.10.2 From 1ec3ddfd27a77db55b8c0e80bcd27c656473fb96 Mon Sep 17 00:00:00 2001 From: Silas Boyd-Wickizer Date: Sun, 23 Sep 2012 20:27:32 +0200 Subject: hwmon: (via-cputemp) Use get_online_cpus to avoid races involving CPU hotplug via_cputemp_init loops with for_each_online_cpu, adding platform_devices, then calls register_hotcpu_notifier. If a CPU is offlined between the loop and register_hotcpu_notifier, then later onlined, via_cputemp_device_add will attempt to add platform devices with the same ID. A similar race occurs during via_cputemp_exit, after the module calls unregister_hotcpu_notifier, a CPU might offline and a device will exist for a CPU that is offline. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by: Silas Boyd-Wickizer Acked-by: Harald Welte Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c index ee4ebc1..2e56c6c 100644 --- a/drivers/hwmon/via-cputemp.c +++ b/drivers/hwmon/via-cputemp.c @@ -328,6 +328,7 @@ static int __init via_cputemp_init(void) if (err) goto exit; + get_online_cpus(); for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); @@ -347,12 +348,14 @@ static int __init via_cputemp_init(void) #ifndef CONFIG_HOTPLUG_CPU if (list_empty(&pdev_list)) { + put_online_cpus(); err = -ENODEV; goto exit_driver_unreg; } #endif register_hotcpu_notifier(&via_cputemp_cpu_notifier); + put_online_cpus(); return 0; #ifndef CONFIG_HOTPLUG_CPU @@ -367,6 +370,7 @@ static void __exit via_cputemp_exit(void) { struct pdev_entry *p, *n; + get_online_cpus(); unregister_hotcpu_notifier(&via_cputemp_cpu_notifier); mutex_lock(&pdev_list_mutex); list_for_each_entry_safe(p, n, &pdev_list, list) { @@ -375,6 +379,7 @@ static void __exit via_cputemp_exit(void) kfree(p); } mutex_unlock(&pdev_list_mutex); + put_online_cpus(); platform_driver_unregister(&via_cputemp_driver); } -- cgit v0.10.2 From 641f14560035bbb86500ea4b3a27ad27f034725b Mon Sep 17 00:00:00 2001 From: Silas Boyd-Wickizer Date: Sun, 23 Sep 2012 20:27:32 +0200 Subject: hwmon: (coretemp) Use get_online_cpus to avoid races involving CPU hotplug coretemp_init loops with for_each_online_cpu, adding platform_devices and sysfs interfaces, then calls register_hotcpu_notifier. There is a race if a CPU is offlined or onlined after the loop, but before register_hotcpu_notifier. The race might result in the absence of a platform_device+sysfs interface for an online CPU, or the presence of a platform_device+sysfs interface for an offline CPU. A similar race occurs during coretemp_exit, after the module calls unregister_hotcpu_notifier, but before it unregisters all devices, a CPU might offline and a device for an offline CPU will exist for a short while. This fix surrounds for_each_online_cpu and register_hotcpu_notifier with get_online_cpus+put_online_cpus; and surrounds unregister_hotcpu_notifier and device unregistering with get_online_cpus+put_online_cpus. Build tested. Signed-off-by: Silas Boyd-Wickizer Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 0fa356f..984a3f1 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -815,17 +815,20 @@ static int __init coretemp_init(void) if (err) goto exit; + get_online_cpus(); for_each_online_cpu(i) get_core_online(i); #ifndef CONFIG_HOTPLUG_CPU if (list_empty(&pdev_list)) { + put_online_cpus(); err = -ENODEV; goto exit_driver_unreg; } #endif register_hotcpu_notifier(&coretemp_cpu_notifier); + put_online_cpus(); return 0; #ifndef CONFIG_HOTPLUG_CPU @@ -840,6 +843,7 @@ static void __exit coretemp_exit(void) { struct pdev_entry *p, *n; + get_online_cpus(); unregister_hotcpu_notifier(&coretemp_cpu_notifier); mutex_lock(&pdev_list_mutex); list_for_each_entry_safe(p, n, &pdev_list, list) { @@ -848,6 +852,7 @@ static void __exit coretemp_exit(void) kfree(p); } mutex_unlock(&pdev_list_mutex); + put_online_cpus(); platform_driver_unregister(&coretemp_driver); } -- cgit v0.10.2 From 5f0ecb907deb1e6f28071ee3bd568903b9da1be4 Mon Sep 17 00:00:00 2001 From: Andreas Herrmann Date: Sun, 23 Sep 2012 20:27:32 +0200 Subject: hwmon: (fam15h_power) Tweak runavg_range on resume The quirk introduced with commit 00250ec90963b7ef6678438888f3244985ecde14 (hwmon: fam15h_power: fix bogus values with current BIOSes) is not only required during driver load but also when system resumes from suspend. The BIOS might set the previously recommended (but unsuitable) initilization value for the running average range register during resume. Signed-off-by: Andreas Herrmann Tested-by: Andreas Hartmann Signed-off-by: Jean Delvare Cc: stable@vger.kernel.org # 3.0+ diff --git a/drivers/hwmon/fam15h_power.c b/drivers/hwmon/fam15h_power.c index 2764b78..af69073 100644 --- a/drivers/hwmon/fam15h_power.c +++ b/drivers/hwmon/fam15h_power.c @@ -129,12 +129,12 @@ static bool __devinit fam15h_power_is_internal_node0(struct pci_dev *f4) * counter saturations resulting in bogus power readings. * We correct this value ourselves to cope with older BIOSes. */ -static DEFINE_PCI_DEVICE_TABLE(affected_device) = { +static const struct pci_device_id affected_device[] = { { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) }, { 0 } }; -static void __devinit tweak_runavg_range(struct pci_dev *pdev) +static void tweak_runavg_range(struct pci_dev *pdev) { u32 val; @@ -158,6 +158,16 @@ static void __devinit tweak_runavg_range(struct pci_dev *pdev) REG_TDP_RUNNING_AVERAGE, val); } +#ifdef CONFIG_PM +static int fam15h_power_resume(struct pci_dev *pdev) +{ + tweak_runavg_range(pdev); + return 0; +} +#else +#define fam15h_power_resume NULL +#endif + static void __devinit fam15h_power_init_data(struct pci_dev *f4, struct fam15h_power_data *data) { @@ -256,6 +266,7 @@ static struct pci_driver fam15h_power_driver = { .id_table = fam15h_power_id_table, .probe = fam15h_power_probe, .remove = __devexit_p(fam15h_power_remove), + .resume = fam15h_power_resume, }; module_pci_driver(fam15h_power_driver); -- cgit v0.10.2 From ef6e7816b4546475d04b4ea22d58c48472157c70 Mon Sep 17 00:00:00 2001 From: Fengguang Wu Date: Sun, 23 Sep 2012 08:18:06 +0800 Subject: edac_mc: fix messy kfree calls in the error path coccinelle warns about: + drivers/edac/edac_mc.c:429:9-23: ERROR: reference preceded by free on line 429 421 if (mci->csrows) { > 422 for (chn = 0; chn < tot_channels; chn++) { 423 csr = mci->csrows[chn]; 424 if (csr) { > 425 for (chn = 0; chn < tot_channels; chn++) 426 kfree(csr->channels[chn]); 427 kfree(csr); 428 } > 429 kfree(mci->csrows[i]); 430 } 431 kfree(mci->csrows); 432 } and that code block seem to mess things up in several ways (double free, memory leak, out-of-bound reads etc.): L422: The iterator "chn" and bound "tot_channels" are totally wrong. Should be "row" and "tot_csrows" respectively. Which means either memory leak, or out-of-bound reads (which if does not trigger an immediate page fault error, will further lead to kfree() on random addresses). L425: The inner loop is reusing the same iterator "chn" as the outer loop, which could lead to premature end of the outer loop, and hence memory leak. L429: The array index 'i' in mci->csrows[i] is a temporary value used in previous loops, and won't change at all in the current loop. Which means either out-of-bound read and possibly kfree(random number), or the same mci->csrows[i] get freed once and again, and possibly double free for the kfree(csr) in L427. L426/L427: a kfree(csr->channels) is needed in between to avoid leaking the memory. The buggy code was introduced by commit de3910eb ("edac: change the mem allocation scheme to make Documentation/kobject.txt happy") in the 3.6-rc1 merge window. Fix it by freeing up resources in this order: free csrows[i]->channels[j] free csrows[i]->channels free csrows[i] free csrows CC: Mauro Carvalho Chehab CC: Shaun Ruffell Signed-off-by: Fengguang Wu Signed-off-by: Linus Torvalds diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 616d90b..9037ffa 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -419,14 +419,16 @@ error: kfree(mci->dimms); } if (mci->csrows) { - for (chn = 0; chn < tot_channels; chn++) { - csr = mci->csrows[chn]; + for (row = 0; row < tot_csrows; row++) { + csr = mci->csrows[row]; if (csr) { - for (chn = 0; chn < tot_channels; chn++) - kfree(csr->channels[chn]); + if (csr->channels) { + for (chn = 0; chn < tot_channels; chn++) + kfree(csr->channels[chn]); + kfree(csr->channels); + } kfree(csr); } - kfree(mci->csrows[i]); } kfree(mci->csrows); } -- cgit v0.10.2 From faa2ad09c01c48012fe4c117d3256e354e0f9238 Mon Sep 17 00:00:00 2001 From: Shaun Ruffell Date: Sat, 22 Sep 2012 20:26:38 -0500 Subject: edac_mc: edac_mc_free() cannot assume mem_ctl_info is registered in sysfs. Fix potential NULL pointer dereference in edac_unregister_sysfs() on system boot introduced in 3.6-rc1. Since commit 7a623c039 ("edac: rewrite the sysfs code to use struct device") edac_mc_alloc() no longer initializes embedded kobjects in struct mem_ctl_info. Therefore edac_mc_free() can no longer simply decrement a kobject reference count to free the allocated memory unless the memory controller driver module had also called edac_mc_add_mc(). Now edac_mc_free() will check if the newly embedded struct device has been registered with sysfs before using either the standard device release functions or freeing the data structures itself with logic pulled out of the error path of edac_mc_alloc(). The BUG this patch resolves for me: BUG: unable to handle kernel NULL pointer dereference at (null) EIP is at __wake_up_common+0x1a/0x6a Process modprobe (pid: 933, ti=f3dc6000 task=f3db9520 task.ti=f3dc6000) Call Trace: complete_all+0x3f/0x50 device_pm_remove+0x23/0xa2 device_del+0x34/0x142 edac_unregister_sysfs+0x3b/0x5c [edac_core] edac_mc_free+0x29/0x2f [edac_core] e7xxx_probe1+0x268/0x311 [e7xxx_edac] e7xxx_init_one+0x56/0x61 [e7xxx_edac] local_pci_probe+0x13/0x15 ... Cc: Mauro Carvalho Chehab Cc: Shaohui Xie Signed-off-by: Shaun Ruffell Signed-off-by: Linus Torvalds diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index 9037ffa..d5dc9da 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -199,6 +199,36 @@ void *edac_align_ptr(void **p, unsigned size, int n_elems) return (void *)(((unsigned long)ptr) + align - r); } +static void _edac_mc_free(struct mem_ctl_info *mci) +{ + int i, chn, row; + struct csrow_info *csr; + const unsigned int tot_dimms = mci->tot_dimms; + const unsigned int tot_channels = mci->num_cschannel; + const unsigned int tot_csrows = mci->nr_csrows; + + if (mci->dimms) { + for (i = 0; i < tot_dimms; i++) + kfree(mci->dimms[i]); + kfree(mci->dimms); + } + if (mci->csrows) { + for (row = 0; row < tot_csrows; row++) { + csr = mci->csrows[row]; + if (csr) { + if (csr->channels) { + for (chn = 0; chn < tot_channels; chn++) + kfree(csr->channels[chn]); + kfree(csr->channels); + } + kfree(csr); + } + } + kfree(mci->csrows); + } + kfree(mci); +} + /** * edac_mc_alloc: Allocate and partially fill a struct mem_ctl_info structure * @mc_num: Memory controller number @@ -413,26 +443,7 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, return mci; error: - if (mci->dimms) { - for (i = 0; i < tot_dimms; i++) - kfree(mci->dimms[i]); - kfree(mci->dimms); - } - if (mci->csrows) { - for (row = 0; row < tot_csrows; row++) { - csr = mci->csrows[row]; - if (csr) { - if (csr->channels) { - for (chn = 0; chn < tot_channels; chn++) - kfree(csr->channels[chn]); - kfree(csr->channels); - } - kfree(csr); - } - } - kfree(mci->csrows); - } - kfree(mci); + _edac_mc_free(mci); return NULL; } @@ -447,6 +458,14 @@ void edac_mc_free(struct mem_ctl_info *mci) { edac_dbg(1, "\n"); + /* If we're not yet registered with sysfs free only what was allocated + * in edac_mc_alloc(). + */ + if (!device_is_registered(&mci->dev)) { + _edac_mc_free(mci); + return; + } + /* the mci instance is freed here, when the sysfs object is dropped */ edac_unregister_sysfs(mci); } -- cgit v0.10.2 From 979570e02981d4a8fc20b3cc8fd651856c98ee9d Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Sep 2012 18:10:57 -0700 Subject: Linux 3.6-rc7 diff --git a/Makefile b/Makefile index ae6928c..a3c11d5 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 3 PATCHLEVEL = 6 SUBLEVEL = 0 -EXTRAVERSION = -rc6 -NAME = Saber-toothed Squirrel +EXTRAVERSION = -rc7 +NAME = Terrified Chipmunk # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v0.10.2