From 557f447f21621de9c5447c8702c33b53279822ce Mon Sep 17 00:00:00 2001
From: Juergen Kilb <J.Kilb@phytec.de>
Date: Thu, 14 Apr 2011 09:31:43 +0200
Subject: mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset

With commit 19403165 a main part of ehci-omap.c moved to
drivers/mfd/omap-usb-host.c created by commit 17cdd29d.
Due to this reorganisation the polarity used to reset the
external USB phy changed and USB host doesn't recognize
any devices.

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 2e16511..3ab9ffa 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -717,14 +717,14 @@ static int usbhs_enable(struct device *dev)
 			gpio_request(pdata->ehci_data->reset_gpio_port[0],
 						"USB1 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[0], 1);
+				(pdata->ehci_data->reset_gpio_port[0], 0);
 		}
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
 			gpio_request(pdata->ehci_data->reset_gpio_port[1],
 						"USB2 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[1], 1);
+				(pdata->ehci_data->reset_gpio_port[1], 0);
 		}
 
 		/* Hold the PHY in RESET for enough time till DIR is high */
@@ -904,11 +904,11 @@ static int usbhs_enable(struct device *dev)
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[0], 0);
+				(pdata->ehci_data->reset_gpio_port[0], 1);
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[1], 0);
+				(pdata->ehci_data->reset_gpio_port[1], 1);
 	}
 
 end_count:
-- 
cgit v0.10.2


From a09aee8b636a3b2b7b10ad57d60d91e9272e771d Mon Sep 17 00:00:00 2001
From: Axel Lin <axel.lin@gmail.com>
Date: Thu, 14 Apr 2011 22:43:47 +0800
Subject: mfd: Fix asic3 build error

Fix below compile error:

  CC      drivers/mfd/asic3.o
drivers/mfd/asic3.c: In function 'asic3_irq_demux':
drivers/mfd/asic3.c:147: error: 'irq_data' undeclared (first use in this function)
drivers/mfd/asic3.c:147: error: (Each undeclared identifier is reported only once
drivers/mfd/asic3.c:147: error: for each function it appears in.)

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index d4a851c..0b4d5b2 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -144,7 +144,7 @@ static void asic3_irq_demux(unsigned int irq, struct irq_desc *desc)
 	int iter, i;
 	unsigned long flags;
 
-	data->chip->irq_ack(irq_data);
+	data->chip->irq_ack(data);
 
 	for (iter = 0 ; iter < MAX_ASIC_ISR_LOOPS; iter++) {
 		u32 status;
-- 
cgit v0.10.2


From c62dd365e248222903e6e3e3a8f5d8587e7e3345 Mon Sep 17 00:00:00 2001
From: Lesly A M <leslyam@ti.com>
Date: Thu, 14 Apr 2011 17:57:49 +0530
Subject: mfd: Fix for the TWL4030 PM sleep/wakeup sequence

Only configure sleep script when the flag is TWL4030_SLEEP_SCRIPT.

Adding the missing brackets for fixing the issue.

Signed-off-by: Lesly A M <leslyam@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: David Derrick <dderrick@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

diff --git a/drivers/mfd/twl4030-power.c b/drivers/mfd/twl4030-power.c
index 16422de0..2c0d4d1 100644
--- a/drivers/mfd/twl4030-power.c
+++ b/drivers/mfd/twl4030-power.c
@@ -447,12 +447,13 @@ static int __init load_twl4030_script(struct twl4030_script *tscript,
 		if (err)
 			goto out;
 	}
-	if (tscript->flags & TWL4030_SLEEP_SCRIPT)
+	if (tscript->flags & TWL4030_SLEEP_SCRIPT) {
 		if (order)
 			pr_warning("TWL4030: Bad order of scripts (sleep "\
 					"script before wakeup) Leads to boot"\
 					"failure on some boards\n");
 		err = twl4030_config_sleep_sequence(address);
+	}
 out:
 	return err;
 }
-- 
cgit v0.10.2