From b723d1448cbefc9fd591798d229d1dafb358bc66 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 26 Mar 2007 21:43:37 -0800
Subject: pata_ali: remove all the crap again and switch to cable_detect method

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>

diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c
index 047f636..d40edeb 100644
--- a/drivers/ata/pata_ali.c
+++ b/drivers/ata/pata_ali.c
@@ -34,7 +34,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.3"
+#define DRV_VERSION "0.7.4"
 
 /*
  *	Cable special cases
@@ -90,59 +90,6 @@ static int ali_c2_cable_detect(struct ata_port *ap)
 }
 
 /**
- *	ali_early_error_handler	-	reset for eary chip
- *	@ap: ATA port
- *
- *	Handle the reset callback for the later chips with cable detect
- */
-
-static int ali_c2_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ali_c2_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ali_c2_error_handler(struct ata_port *ap)
-{
-	ata_bmdma_drive_eh(ap, ali_c2_pre_reset,
-			       ata_std_softreset, NULL,
-			       ata_std_postreset);
-}
-
-/**
- *	ali_early_cable_detect	-	cable detection
- *	@ap: ATA port
- *
- *	Perform cable detection for older chipsets. This turns out to be
- *	rather easy to implement
- */
-
-static int ali_early_cable_detect(struct ata_port *ap)
-{
-	return ATA_CBL_PATA40;
-}
-
-/**
- *	ali_early_probe_init	-	reset for early chip
- *	@ap: ATA port
- *
- *	Handle the reset callback for the early (pre cable detect) chips.
- */
-
-static int ali_early_pre_reset(struct ata_port *ap)
-{
-	ap->cbl = ali_early_cable_detect(ap);
-	return ata_std_prereset(ap);
-}
-
-static void ali_early_error_handler(struct ata_port *ap)
-{
-	return ata_bmdma_drive_eh(ap, ali_early_pre_reset,
-				     ata_std_softreset, NULL,
-				     ata_std_postreset);
-}
-
-/**
  *	ali_20_filter		-	filter for earlier ALI DMA
  *	@ap: ALi ATA port
  *	@adev: attached device
@@ -314,7 +261,6 @@ static void ali_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 
 /**
  *	ali_lock_sectors	-	Keep older devices to 255 sector mode
- *	@ap: ATA port
  *	@adev: Device
  *
  *	Called during the bus probe for each device that is found. We use
@@ -366,8 +312,9 @@ static struct ata_port_operations ali_early_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_early_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.qc_prep 	= ata_qc_prep,
 	.qc_issue	= ata_qc_issue_prot,
@@ -402,8 +349,9 @@ static struct ata_port_operations ali_20_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_early_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ata_cable_40wire,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -440,8 +388,9 @@ static struct ata_port_operations ali_c2_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_c2_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ali_c2_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
@@ -477,8 +426,9 @@ static struct ata_port_operations ali_c5_port_ops = {
 
 	.freeze		= ata_bmdma_freeze,
 	.thaw		= ata_bmdma_thaw,
-	.error_handler	= ali_c2_error_handler,
+	.error_handler	= ata_bmdma_error_handler,
 	.post_internal_cmd = ata_bmdma_post_internal_cmd,
+	.cable_detect	= ali_c2_cable_detect,
 
 	.bmdma_setup 	= ata_bmdma_setup,
 	.bmdma_start 	= ata_bmdma_start,
-- 
cgit v0.10.2