From b97b8287a39d1fe6f8aa1b83405f669634ff8401 Mon Sep 17 00:00:00 2001 From: Patrik Jakobsson Date: Thu, 7 Nov 2013 00:14:18 +0100 Subject: drm/gma500/mrst: Add aux register writes when programming pipe On SDVO pipes (always Pipe B on mrst) we have to sequentially write the aux vdc. We might be able to skip programming the primary vdc in some/most places but we don't care about that now. Signed-off-by: Patrik Jakobsson diff --git a/drivers/gpu/drm/gma500/oaktrail_crtc.c b/drivers/gpu/drm/gma500/oaktrail_crtc.c index bde3065..ef4f076 100644 --- a/drivers/gpu/drm/gma500/oaktrail_crtc.c +++ b/drivers/gpu/drm/gma500/oaktrail_crtc.c @@ -227,6 +227,8 @@ static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode) int pipe = gma_crtc->pipe; const struct psb_offset *map = &dev_priv->regmap[pipe]; u32 temp; + int i; + int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0; if (pipe == 1) { oaktrail_crtc_hdmi_dpms(crtc, mode); @@ -243,35 +245,45 @@ static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode) case DRM_MODE_DPMS_ON: case DRM_MODE_DPMS_STANDBY: case DRM_MODE_DPMS_SUSPEND: - /* Enable the DPLL */ - temp = REG_READ(map->dpll); - if ((temp & DPLL_VCO_ENABLE) == 0) { - REG_WRITE(map->dpll, temp); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); - REG_WRITE(map->dpll, temp | DPLL_VCO_ENABLE); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); - } - /* Enable the pipe */ - temp = REG_READ(map->conf); - if ((temp & PIPEACONF_ENABLE) == 0) - REG_WRITE(map->conf, temp | PIPEACONF_ENABLE); - /* Enable the plane */ - temp = REG_READ(map->cntr); - if ((temp & DISPLAY_PLANE_ENABLE) == 0) { - REG_WRITE(map->cntr, - temp | DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(map->base, REG_READ(map->base)); - } + for (i = 0; i <= need_aux; i++) { + /* Enable the DPLL */ + temp = REG_READ_WITH_AUX(map->dpll, i); + if ((temp & DPLL_VCO_ENABLE) == 0) { + REG_WRITE_WITH_AUX(map->dpll, temp, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE_WITH_AUX(map->dpll, + temp | DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + REG_WRITE_WITH_AUX(map->dpll, + temp | DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); + } + + /* Enable the pipe */ + temp = REG_READ_WITH_AUX(map->conf, i); + if ((temp & PIPEACONF_ENABLE) == 0) { + REG_WRITE_WITH_AUX(map->conf, + temp | PIPEACONF_ENABLE, i); + } + /* Enable the plane */ + temp = REG_READ_WITH_AUX(map->cntr, i); + if ((temp & DISPLAY_PLANE_ENABLE) == 0) { + REG_WRITE_WITH_AUX(map->cntr, + temp | DISPLAY_PLANE_ENABLE, + i); + /* Flush the plane changes */ + REG_WRITE_WITH_AUX(map->base, + REG_READ_WITH_AUX(map->base, i), i); + } + + } gma_crtc_load_lut(crtc); /* Give the overlay scaler a chance to enable @@ -283,35 +295,40 @@ static void oaktrail_crtc_dpms(struct drm_crtc *crtc, int mode) * if it's on this pipe */ /* psb_intel_crtc_dpms_video(crtc, FALSE); TODO */ - /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); - /* Disable display plane */ - temp = REG_READ(map->cntr); - if ((temp & DISPLAY_PLANE_ENABLE) != 0) { - REG_WRITE(map->cntr, - temp & ~DISPLAY_PLANE_ENABLE); - /* Flush the plane changes */ - REG_WRITE(map->base, REG_READ(map->base)); - REG_READ(map->base); - } + for (i = 0; i <= need_aux; i++) { + /* Disable the VGA plane that we never use */ + REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i); + /* Disable display plane */ + temp = REG_READ_WITH_AUX(map->cntr, i); + if ((temp & DISPLAY_PLANE_ENABLE) != 0) { + REG_WRITE_WITH_AUX(map->cntr, + temp & ~DISPLAY_PLANE_ENABLE, i); + /* Flush the plane changes */ + REG_WRITE_WITH_AUX(map->base, + REG_READ(map->base), i); + REG_READ_WITH_AUX(map->base, i); + } - /* Next, disable display pipes */ - temp = REG_READ(map->conf); - if ((temp & PIPEACONF_ENABLE) != 0) { - REG_WRITE(map->conf, temp & ~PIPEACONF_ENABLE); - REG_READ(map->conf); - } - /* Wait for for the pipe disable to take effect. */ - gma_wait_for_vblank(dev); + /* Next, disable display pipes */ + temp = REG_READ_WITH_AUX(map->conf, i); + if ((temp & PIPEACONF_ENABLE) != 0) { + REG_WRITE_WITH_AUX(map->conf, + temp & ~PIPEACONF_ENABLE, i); + REG_READ_WITH_AUX(map->conf, i); + } + /* Wait for for the pipe disable to take effect. */ + gma_wait_for_vblank(dev); + + temp = REG_READ_WITH_AUX(map->dpll, i); + if ((temp & DPLL_VCO_ENABLE) != 0) { + REG_WRITE_WITH_AUX(map->dpll, + temp & ~DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + } - temp = REG_READ(map->dpll); - if ((temp & DPLL_VCO_ENABLE) != 0) { - REG_WRITE(map->dpll, temp & ~DPLL_VCO_ENABLE); - REG_READ(map->dpll); + /* Wait for the clocks to turn off. */ + udelay(150); } - - /* Wait for the clocks to turn off. */ - udelay(150); break; } @@ -367,6 +384,8 @@ static int oaktrail_crtc_mode_set(struct drm_crtc *crtc, struct gma_encoder *gma_encoder = NULL; uint64_t scalingType = DRM_MODE_SCALE_FULLSCREEN; struct drm_connector *connector; + int i; + int need_aux = gma_pipe_has_type(crtc, INTEL_OUTPUT_SDVO) ? 1 : 0; if (pipe == 1) return oaktrail_crtc_hdmi_mode_set(crtc, mode, adjusted_mode, x, y, old_fb); @@ -401,15 +420,17 @@ static int oaktrail_crtc_mode_set(struct drm_crtc *crtc, } /* Disable the VGA plane that we never use */ - REG_WRITE(VGACNTRL, VGA_DISP_DISABLE); + for (i = 0; i <= need_aux; i++) + REG_WRITE_WITH_AUX(VGACNTRL, VGA_DISP_DISABLE, i); /* Disable the panel fitter if it was on our pipe */ if (oaktrail_panel_fitter_pipe(dev) == pipe) REG_WRITE(PFIT_CONTROL, 0); - REG_WRITE(map->src, - ((mode->crtc_hdisplay - 1) << 16) | - (mode->crtc_vdisplay - 1)); + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->src, ((mode->crtc_hdisplay - 1) << 16) | + (mode->crtc_vdisplay - 1), i); + } if (gma_encoder) drm_object_property_get_value(&connector->base, @@ -426,35 +447,39 @@ static int oaktrail_crtc_mode_set(struct drm_crtc *crtc, offsetY = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2; - REG_WRITE(map->htotal, (mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(map->vtotal, (mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(map->hblank, - (adjusted_mode->crtc_hblank_start - offsetX - 1) | - ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16)); - REG_WRITE(map->hsync, - (adjusted_mode->crtc_hsync_start - offsetX - 1) | - ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16)); - REG_WRITE(map->vblank, - (adjusted_mode->crtc_vblank_start - offsetY - 1) | - ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16)); - REG_WRITE(map->vsync, - (adjusted_mode->crtc_vsync_start - offsetY - 1) | - ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16)); + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->htotal, (mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vtotal, (mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hblank, + (adjusted_mode->crtc_hblank_start - offsetX - 1) | + ((adjusted_mode->crtc_hblank_end - offsetX - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hsync, + (adjusted_mode->crtc_hsync_start - offsetX - 1) | + ((adjusted_mode->crtc_hsync_end - offsetX - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vblank, + (adjusted_mode->crtc_vblank_start - offsetY - 1) | + ((adjusted_mode->crtc_vblank_end - offsetY - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vsync, + (adjusted_mode->crtc_vsync_start - offsetY - 1) | + ((adjusted_mode->crtc_vsync_end - offsetY - 1) << 16), i); + } } else { - REG_WRITE(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | - ((adjusted_mode->crtc_htotal - 1) << 16)); - REG_WRITE(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | - ((adjusted_mode->crtc_vtotal - 1) << 16)); - REG_WRITE(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | - ((adjusted_mode->crtc_hblank_end - 1) << 16)); - REG_WRITE(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | - ((adjusted_mode->crtc_hsync_end - 1) << 16)); - REG_WRITE(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | - ((adjusted_mode->crtc_vblank_end - 1) << 16)); - REG_WRITE(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | - ((adjusted_mode->crtc_vsync_end - 1) << 16)); + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->htotal, (adjusted_mode->crtc_hdisplay - 1) | + ((adjusted_mode->crtc_htotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vtotal, (adjusted_mode->crtc_vdisplay - 1) | + ((adjusted_mode->crtc_vtotal - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hblank, (adjusted_mode->crtc_hblank_start - 1) | + ((adjusted_mode->crtc_hblank_end - 1) << 16), i); + REG_WRITE_WITH_AUX(map->hsync, (adjusted_mode->crtc_hsync_start - 1) | + ((adjusted_mode->crtc_hsync_end - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vblank, (adjusted_mode->crtc_vblank_start - 1) | + ((adjusted_mode->crtc_vblank_end - 1) << 16), i); + REG_WRITE_WITH_AUX(map->vsync, (adjusted_mode->crtc_vsync_start - 1) | + ((adjusted_mode->crtc_vsync_end - 1) << 16), i); + } } /* Flush the plane changes */ @@ -534,31 +559,35 @@ static int oaktrail_crtc_mode_set(struct drm_crtc *crtc, dpll |= DPLL_VCO_ENABLE; if (dpll & DPLL_VCO_ENABLE) { - REG_WRITE(map->fp0, fp); - REG_WRITE(map->dpll, dpll & ~DPLL_VCO_ENABLE); - REG_READ(map->dpll); - /* Check the DPLLA lock bit PIPEACONF[29] */ - udelay(150); + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->fp0, fp, i); + REG_WRITE_WITH_AUX(map->dpll, dpll & ~DPLL_VCO_ENABLE, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Check the DPLLA lock bit PIPEACONF[29] */ + udelay(150); + } } - REG_WRITE(map->fp0, fp); - REG_WRITE(map->dpll, dpll); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); + for (i = 0; i <= need_aux; i++) { + REG_WRITE_WITH_AUX(map->fp0, fp, i); + REG_WRITE_WITH_AUX(map->dpll, dpll, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); - /* write it again -- the BIOS does, after all */ - REG_WRITE(map->dpll, dpll); - REG_READ(map->dpll); - /* Wait for the clocks to stabilize. */ - udelay(150); + /* write it again -- the BIOS does, after all */ + REG_WRITE_WITH_AUX(map->dpll, dpll, i); + REG_READ_WITH_AUX(map->dpll, i); + /* Wait for the clocks to stabilize. */ + udelay(150); - REG_WRITE(map->conf, pipeconf); - REG_READ(map->conf); - gma_wait_for_vblank(dev); + REG_WRITE_WITH_AUX(map->conf, pipeconf, i); + REG_READ_WITH_AUX(map->conf, i); + gma_wait_for_vblank(dev); - REG_WRITE(map->cntr, dspcntr); - gma_wait_for_vblank(dev); + REG_WRITE_WITH_AUX(map->cntr, dspcntr, i); + gma_wait_for_vblank(dev); + } oaktrail_crtc_mode_set_exit: gma_power_end(dev); diff --git a/drivers/gpu/drm/gma500/psb_drv.h b/drivers/gpu/drm/gma500/psb_drv.h index dc7a8de..b59e658 100644 --- a/drivers/gpu/drm/gma500/psb_drv.h +++ b/drivers/gpu/drm/gma500/psb_drv.h @@ -941,6 +941,22 @@ static inline uint32_t REGISTER_READ_AUX(struct drm_device *dev, uint32_t reg) #define REG_READ(reg) REGISTER_READ(dev, (reg)) #define REG_READ_AUX(reg) REGISTER_READ_AUX(dev, (reg)) +/* Useful for post reads */ +static inline uint32_t REGISTER_READ_WITH_AUX(struct drm_device *dev, + uint32_t reg, int aux) +{ + uint32_t val; + + if (aux) + val = REG_READ_AUX(reg); + else + val = REG_READ(reg); + + return val; +} + +#define REG_READ_WITH_AUX(reg, aux) REGISTER_READ_WITH_AUX(dev, (reg), (aux)) + static inline void REGISTER_WRITE(struct drm_device *dev, uint32_t reg, uint32_t val) { @@ -958,6 +974,17 @@ static inline void REGISTER_WRITE_AUX(struct drm_device *dev, uint32_t reg, #define REG_WRITE(reg, val) REGISTER_WRITE(dev, (reg), (val)) #define REG_WRITE_AUX(reg, val) REGISTER_WRITE_AUX(dev, (reg), (val)) +static inline void REGISTER_WRITE_WITH_AUX(struct drm_device *dev, uint32_t reg, + uint32_t val, int aux) +{ + if (aux) + REG_WRITE_AUX(reg, val); + else + REG_WRITE(reg, val); +} + +#define REG_WRITE_WITH_AUX(reg, val, aux) REGISTER_WRITE_WITH_AUX(dev, (reg), (val), (aux)) + static inline void REGISTER_WRITE16(struct drm_device *dev, uint32_t reg, uint32_t val) { -- cgit v0.10.2