From 0f4bd46ec252887f44f1f065b41867cac8f70dfb Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Tue, 22 Dec 2009 03:15:43 +0000 Subject: kmsg_dump: Dump on crash_kexec as well crash_kexec gets called before kmsg_dump(KMSG_DUMP_OOPS) if panic_on_oops is set, so the kernel log buffer is not stored for this case. This patch adds a KMSG_DUMP_KEXEC dump type which gets called when crash_kexec() is invoked. To avoid getting double dumps, the old KMSG_DUMP_PANIC is moved below crash_kexec(). The mtdoops driver is modified to handle KMSG_DUMP_KEXEC in the same way as a panic. Signed-off-by: KOSAKI Motohiro Acked-by: Simon Kagstrom Signed-off-by: David Woodhouse diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index a714ec4..92e12df 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -322,7 +322,7 @@ static void mtdoops_do_dump(struct kmsg_dumper *dumper, memcpy(dst + l1_cpy, s2 + s2_start, l2_cpy); /* Panics must be written immediately */ - if (reason == KMSG_DUMP_PANIC) { + if (reason != KMSG_DUMP_OOPS) { if (!cxt->mtd->panic_write) printk(KERN_ERR "mtdoops: Cannot write from panic without panic_write\n"); else diff --git a/include/linux/kmsg_dump.h b/include/linux/kmsg_dump.h index e32aa26..24b4414 100644 --- a/include/linux/kmsg_dump.h +++ b/include/linux/kmsg_dump.h @@ -17,6 +17,7 @@ enum kmsg_dump_reason { KMSG_DUMP_OOPS, KMSG_DUMP_PANIC, + KMSG_DUMP_KEXEC, }; /** diff --git a/kernel/kexec.c b/kernel/kexec.c index 433e9fc..ae21748 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -32,6 +32,7 @@ #include #include #include +#include #include #include @@ -1074,6 +1075,9 @@ void crash_kexec(struct pt_regs *regs) if (mutex_trylock(&kexec_mutex)) { if (kexec_crash_image) { struct pt_regs fixed_regs; + + kmsg_dump(KMSG_DUMP_KEXEC); + crash_setup_regs(&fixed_regs, regs); crash_save_vmcoreinfo(); machine_crash_shutdown(&fixed_regs); diff --git a/kernel/panic.c b/kernel/panic.c index 5827f7b..c787333 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -75,7 +75,6 @@ NORET_TYPE void panic(const char * fmt, ...) dump_stack(); #endif - kmsg_dump(KMSG_DUMP_PANIC); /* * If we have crashed and we have a crash kernel loaded let it handle * everything else. @@ -83,6 +82,8 @@ NORET_TYPE void panic(const char * fmt, ...) */ crash_kexec(NULL); + kmsg_dump(KMSG_DUMP_PANIC); + /* * Note smp_send_stop is the usual smp shutdown function, which * unfortunately means it may not be hardened to work in a panic diff --git a/kernel/printk.c b/kernel/printk.c index 1ded8e7..2c9dc0b 100644 --- a/kernel/printk.c +++ b/kernel/printk.c @@ -1467,6 +1467,7 @@ EXPORT_SYMBOL_GPL(kmsg_dump_unregister); static const char const *kmsg_reasons[] = { [KMSG_DUMP_OOPS] = "oops", [KMSG_DUMP_PANIC] = "panic", + [KMSG_DUMP_KEXEC] = "kexec", }; static const char *kmsg_to_str(enum kmsg_dump_reason reason) -- cgit v0.10.2 From f6a8c60960bbea378142d1fa1b3d111555ee41c7 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sun, 29 Nov 2009 15:23:51 +0000 Subject: mtd: Really add ARM pismo support (Commit 7cb777a3d71f9d1f7eb149c7a504d21f24219ae8 (mtd: add ARM pismo support) intended to add this, but seems only to have patched the Makefile without touching Kconfig or providing any code...) The following patch adds support for PISMO modules found on ARM Ltd development platforms. These are MTD modules, and can have a selection of SRAM, flash or DOC devices as described by an on-board I2C EEPROM. We support SRAM and NOR flash devices only by registering appropriate conventional MTD platform devices as children of the 'pismo' device. Signed-off-by: Russell King Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 4c364d4..2de0cc8 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -549,4 +549,21 @@ config MTD_VMU To build this as a module select M here, the module will be called vmu-flash. +config MTD_PISMO + tristate "MTD discovery driver for PISMO modules" + depends on I2C + depends on ARCH_VERSATILE + help + This driver allows for discovery of PISMO modules - see + . These are small modules containing + up to five memory devices (eg, SRAM, flash, DOC) described by an + I2C EEPROM. + + This driver does not create any MTD maps itself; instead it + creates MTD physmap and MTD SRAM platform devices. If you + enable this option, you should consider enabling MTD_PHYSMAP + and/or MTD_PLATRAM according to the devices on your module. + + When built as a module, it will be called pismo.ko + endmenu diff --git a/drivers/mtd/maps/pismo.c b/drivers/mtd/maps/pismo.c new file mode 100644 index 0000000..c48cad2 --- /dev/null +++ b/drivers/mtd/maps/pismo.c @@ -0,0 +1,320 @@ +/* + * PISMO memory driver - http://www.pismoworld.org/ + * + * For ARM Realview and Versatile platforms + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PISMO_NUM_CS 5 + +struct pismo_cs_block { + u8 type; + u8 width; + __le16 access; + __le32 size; + u32 reserved[2]; + char device[32]; +} __packed; + +struct pismo_eeprom { + struct pismo_cs_block cs[PISMO_NUM_CS]; + char board[15]; + u8 sum; +} __packed; + +struct pismo_mem { + phys_addr_t base; + u32 size; + u16 access; + u8 width; + u8 type; +}; + +struct pismo_data { + struct i2c_client *client; + void (*vpp)(void *, int); + void *vpp_data; + struct platform_device *dev[PISMO_NUM_CS]; +}; + +/* FIXME: set_vpp could do with a better calling convention */ +static struct pismo_data *vpp_pismo; +static DEFINE_MUTEX(pismo_mutex); + +static int pismo_setvpp_probe_fix(struct pismo_data *pismo) +{ + mutex_lock(&pismo_mutex); + if (vpp_pismo) { + mutex_unlock(&pismo_mutex); + kfree(pismo); + return -EBUSY; + } + vpp_pismo = pismo; + mutex_unlock(&pismo_mutex); + return 0; +} + +static void pismo_setvpp_remove_fix(struct pismo_data *pismo) +{ + mutex_lock(&pismo_mutex); + if (vpp_pismo == pismo) + vpp_pismo = NULL; + mutex_unlock(&pismo_mutex); +} + +static void pismo_set_vpp(struct map_info *map, int on) +{ + struct pismo_data *pismo = vpp_pismo; + + pismo->vpp(pismo->vpp_data, on); +} +/* end of hack */ + + +static unsigned int __devinit pismo_width_to_bytes(unsigned int width) +{ + width &= 15; + if (width > 2) + return 0; + return 1 << width; +} + +static int __devinit pismo_eeprom_read(struct i2c_client *client, void *buf, + u8 addr, size_t size) +{ + int ret; + struct i2c_msg msg[] = { + { + .addr = client->addr, + .len = sizeof(addr), + .buf = &addr, + }, { + .addr = client->addr, + .flags = I2C_M_RD, + .len = size, + .buf = buf, + }, + }; + + ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg)); + + return ret == ARRAY_SIZE(msg) ? size : -EIO; +} + +static int __devinit pismo_add_device(struct pismo_data *pismo, int i, + struct pismo_mem *region, const char *name, void *pdata, size_t psize) +{ + struct platform_device *dev; + struct resource res = { }; + phys_addr_t base = region.base; + int ret; + + if (base == ~0) + return -ENXIO; + + res.start = base; + res.end = base + region->size - 1; + res.flags = IORESOURCE_MEM; + + dev = platform_device_alloc(name, i); + if (!dev) + return -ENOMEM; + dev->dev.parent = &pismo->client->dev; + + do { + ret = platform_device_add_resources(dev, &res, 1); + if (ret) + break; + + ret = platform_device_add_data(dev, pdata, psize); + if (ret) + break; + + ret = platform_device_add(dev); + if (ret) + break; + + pismo->dev[i] = dev; + return 0; + } while (0); + + platform_device_put(dev); + return ret; +} + +static int __devinit pismo_add_nor(struct pismo_data *pismo, int i, + struct pismo_mem *region) +{ + struct physmap_flash_data data = { + .width = region->width, + }; + + if (pismo->vpp) + data.set_vpp = pismo_set_vpp; + + return pismo_add_device(pismo, i, region, "physmap-flash", + &data, sizeof(data)); +} + +static int __devinit pismo_add_sram(struct pismo_data *pismo, int i, + struct pismo_mem *region) +{ + struct platdata_mtd_ram data = { + .bankwidth = region->width, + }; + + return pismo_add_device(pismo, i, region, "mtd-ram", + &data, sizeof(data)); +} + +static void __devinit pismo_add_one(struct pismo_data *pismo, int i, + const struct pismo_cs_block *cs, phys_addr_t base) +{ + struct device *dev = &pismo->client->dev; + struct pismo_mem region; + + region.base = base; + region.type = cs->type; + region.width = pismo_width_to_bytes(cs->width); + region.access = le16_to_cpu(cs->access); + region.size = le32_to_cpu(cs->size); + + if (region.width == 0) { + dev_err(dev, "cs%u: bad width: %02x, ignoring\n", i, cs->width); + return; + } + + /* + * FIXME: may need to the platforms memory controller here, but at + * the moment we assume that it has already been correctly setup. + * The memory controller can also tell us the base address as well. + */ + + dev_info(dev, "cs%u: %.32s: type %02x access %u00ps size %uK\n", + i, cs->device, region.type, region.access, region.size / 1024); + + switch (region.type) { + case 0: + break; + case 1: + /* static DOC */ + break; + case 2: + /* static NOR */ + pismo_add_nor(pismo, i, ®ion); + break; + case 3: + /* static RAM */ + pismo_add_sram(pismo, i, ®ion); + break; + } +} + +static int __devexit pismo_remove(struct i2c_client *client) +{ + struct pismo_data *pismo = i2c_get_clientdata(client); + int i; + + for (i = 0; i < ARRAY_SIZE(pismo->dev); i++) + platform_device_unregister(pismo->dev[i]); + + /* FIXME: set_vpp needs saner arguments */ + pismo_setvpp_remove_fix(pismo); + + kfree(pismo); + + return 0; +} + +static int __devinit pismo_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + struct pismo_pdata *pdata = client->dev.platform_data; + struct pismo_eeprom eeprom; + struct pismo_data *pismo; + int ret, i; + + if (!i2c_check_functionality(adapter, I2C_FUNC_I2C)) { + dev_err(&client->dev, "functionality mismatch\n"); + return -EIO; + } + + pismo = kzalloc(sizeof(*pismo), GFP_KERNEL); + if (!pismo) + return -ENOMEM; + + /* FIXME: set_vpp needs saner arguments */ + ret = pismo_setvpp_probe_fix(pismo); + if (ret) + return ret; + + pismo->client = client; + if (pdata) { + pismo->vpp = pdata->set_vpp; + pismo->vpp_data = pdata->vpp_data; + } + i2c_set_clientdata(client, pismo); + + ret = pismo_eeprom_read(client, &eeprom, 0, sizeof(eeprom)); + if (ret < 0) { + dev_err(&client->dev, "error reading EEPROM: %d\n", ret); + return ret; + } + + dev_info(&client->dev, "%.15s board found\n", eeprom.board); + + for (i = 0; i < ARRAY_SIZE(eeprom.cs); i++) + if (eeprom.cs[i].type != 0xff) + pismo_add_one(pismo, i, &eeprom.cs[i], + pdata->cs_addrs[i]); + + return 0; +} + +static const struct i2c_device_id pismo_id[] = { + { "pismo" }, + { }, +}; +MODULE_DEVICE_TABLE(i2c, pismo_id); + +static struct i2c_driver pismo_driver = { + .driver = { + .name = "pismo", + .owner = THIS_MODULE, + }, + .probe = pismo_probe, + .remove = __devexit_p(pismo_remove), + .id_table = pismo_id, +}; + +static int __init pismo_init(void) +{ + BUILD_BUG_ON(sizeof(struct pismo_cs_block) != 48); + BUILD_BUG_ON(sizeof(struct pismo_eeprom) != 256); + + return i2c_add_driver(&pismo_driver); +} +module_init(pismo_init); + +static void __exit pismo_exit(void) +{ + i2c_del_driver(&pismo_driver); +} +module_exit(pismo_exit); + +MODULE_AUTHOR("Russell King "); +MODULE_DESCRIPTION("PISMO memory driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/mtd/pismo.h b/include/linux/mtd/pismo.h new file mode 100644 index 0000000..8dfb7e1 --- /dev/null +++ b/include/linux/mtd/pismo.h @@ -0,0 +1,17 @@ +/* + * PISMO memory driver - http://www.pismoworld.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. + */ +#ifndef __LINUX_MTD_PISMO_H +#define __LINUX_MTD_PISMO_H + +struct pismo_pdata { + void (*set_vpp)(void *, int); + void *vpp_data; + phys_addr_t cs_addrs[5]; +}; + +#endif -- cgit v0.10.2 From f5e2bae0aad03164ffc7ce9dfeee6608e2c87dba Mon Sep 17 00:00:00 2001 From: Morten Thunberg Svendsen Date: Wed, 6 Jan 2010 10:48:18 +0100 Subject: mtd: tests: fix read, speed and stress tests on NOR flash Before using block_isbad() check if mtd->block_isbad() is defined. Calculating pgcnt must be done using pgsize defined to 512 on NOR and mtd->writesize for NAND, not using mtd->writesize directly. Signed-off-by: Morten Thunberg Svendsen Acked-by: Artem Bityutskiy Signed-off-by: David Woodhouse diff --git a/drivers/mtd/tests/mtd_readtest.c b/drivers/mtd/tests/mtd_readtest.c index 79fc453..25c5dd0 100644 --- a/drivers/mtd/tests/mtd_readtest.c +++ b/drivers/mtd/tests/mtd_readtest.c @@ -147,6 +147,10 @@ static int scan_for_bad_eraseblocks(void) } memset(bbt, 0 , ebcnt); + /* NOR flash does not implement block_isbad */ + if (mtd->block_isbad == NULL) + return 0; + printk(PRINT_PREF "scanning for bad eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { bbt[i] = is_block_bad(i) ? 1 : 0; @@ -184,7 +188,7 @@ static int __init mtd_readtest_init(void) tmp = mtd->size; do_div(tmp, mtd->erasesize); ebcnt = tmp; - pgcnt = mtd->erasesize / mtd->writesize; + pgcnt = mtd->erasesize / pgsize; printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " "page size %u, count of eraseblocks %u, pages per " diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/mtd_speedtest.c index 141363a..7fbb51d 100644 --- a/drivers/mtd/tests/mtd_speedtest.c +++ b/drivers/mtd/tests/mtd_speedtest.c @@ -301,6 +301,10 @@ static int scan_for_bad_eraseblocks(void) } memset(bbt, 0 , ebcnt); + /* NOR flash does not implement block_isbad */ + if (mtd->block_isbad == NULL) + goto out; + printk(PRINT_PREF "scanning for bad eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { bbt[i] = is_block_bad(i) ? 1 : 0; @@ -309,6 +313,7 @@ static int scan_for_bad_eraseblocks(void) cond_resched(); } printk(PRINT_PREF "scanned %d eraseblocks, %d are bad\n", i, bad); +out: goodebcnt = ebcnt - bad; return 0; } @@ -340,7 +345,7 @@ static int __init mtd_speedtest_init(void) tmp = mtd->size; do_div(tmp, mtd->erasesize); ebcnt = tmp; - pgcnt = mtd->erasesize / mtd->writesize; + pgcnt = mtd->erasesize / pgsize; printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " "page size %u, count of eraseblocks %u, pages per " diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c index 6392047..a99d3cd 100644 --- a/drivers/mtd/tests/mtd_stresstest.c +++ b/drivers/mtd/tests/mtd_stresstest.c @@ -227,6 +227,10 @@ static int scan_for_bad_eraseblocks(void) } memset(bbt, 0 , ebcnt); + /* NOR flash does not implement block_isbad */ + if (mtd->block_isbad == NULL) + return 0; + printk(PRINT_PREF "scanning for bad eraseblocks\n"); for (i = 0; i < ebcnt; ++i) { bbt[i] = is_block_bad(i) ? 1 : 0; @@ -265,7 +269,7 @@ static int __init mtd_stresstest_init(void) tmp = mtd->size; do_div(tmp, mtd->erasesize); ebcnt = tmp; - pgcnt = mtd->erasesize / mtd->writesize; + pgcnt = mtd->erasesize / pgsize; printk(PRINT_PREF "MTD device size %llu, eraseblock size %u, " "page size %u, count of eraseblocks %u, pages per " -- cgit v0.10.2