From 8618ccd352dcd01628f39eb1fca4f9a7bc077ea1 Mon Sep 17 00:00:00 2001 From: "Justin P. Mattock" Date: Wed, 22 Jun 2011 23:29:20 -0700 Subject: drivers/ata/sata_dwc_460ex: Fix typo 'corrresponding' The patch below fixes a typo. Signed-off-by: Justin P. Mattock Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_dwc_460ex.c b/drivers/ata/sata_dwc_460ex.c index 1c4b3aa..dc88a39 100644 --- a/drivers/ata/sata_dwc_460ex.c +++ b/drivers/ata/sata_dwc_460ex.c @@ -389,7 +389,7 @@ static void sata_dwc_tf_dump(struct ata_taskfile *tf) /* * Function: get_burst_length_encode * arguments: datalength: length in bytes of data - * returns value to be programmed in register corrresponding to data length + * returns value to be programmed in register corresponding to data length * This value is effectively the log(base 2) of the length */ static int get_burst_length_encode(int datalength) -- cgit v0.10.2 From cd691876d73e24b4c0a2e96993251abbe3a320df Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 22 Jun 2011 12:13:10 +0200 Subject: libata: apply NOSETXFER horkage to the affected Pioneer drives regardless of firmware revision It's unlikely NOSETXFER works for a revision of drive but doesn't for another and pioneer doesn't seem to be fixing firmwares for the affected drives. Apply NOSETXFER to the affected pioneer drives regardless of firmware revision. http://article.gmane.org/gmane.linux.ide/49734 Signed-off-by: Tejun Heo Reported-by: fl-00@gmx.de Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 736bee5..000d03a 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4143,9 +4143,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { * Devices which choke on SETXFER. Applies only if both the * device and controller are SATA. */ - { "PIONEER DVD-RW DVRTD08", "1.00", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-212D", "1.28", ATA_HORKAGE_NOSETXFER }, - { "PIONEER DVD-RW DVR-216D", "1.08", ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVRTD08", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-212D", NULL, ATA_HORKAGE_NOSETXFER }, + { "PIONEER DVD-RW DVR-216D", NULL, ATA_HORKAGE_NOSETXFER }, /* End Marker */ { } -- cgit v0.10.2 From 3f1e046ad3370d22d39529103667354eb50abc08 Mon Sep 17 00:00:00 2001 From: Nishanth Aravamudan Date: Thu, 16 Jun 2011 08:28:36 -0700 Subject: libata/sas: only set FROZEN flag if new EH is supported On 16.06.2011 [08:28:39 -0500], Brian King wrote: > On 06/16/2011 02:51 AM, Tejun Heo wrote: > > On Wed, Jun 15, 2011 at 04:34:17PM -0700, Nishanth Aravamudan wrote: > >>> That looks like the right thing to do. For ipr's usage of > >>> libata, we don't have the concept of a port frozen state, so this flag > >>> should really never get set. The alternate way to fix this would be to > >>> only set ATA_PFLAG_FROZEN in ata_port_alloc if ap->ops->error_handler > >>> is not NULL. > >> > >> It seemed like ipr is as you say, but I wasn't sure if it was > >> appropriate to make the change above in the common libata-scis code or > >> not. I don't want to break some other device on accident. > >> > >> Also, I tried your suggestion, but I don't think that can happen in > >> ata_port_alloc? ata_port_alloc is allocated ap itself, and it seems like > >> ap->ops typically gets set only after ata_port_alloc returns? > > > > Maybe we can test error_handler in ata_sas_port_start()? > > Good point. Since libsas is converted to the new eh now, we would need to have > this test. Commit 7b3a24c57d2eeda8dba9c205342b12689c4679f9 ("ahci: don't enable port irq before handler is registered") caused a regression for CD-ROMs attached to the IPR SATA bus on Power machines: ata_port_alloc: ENTER ata_port_probe: ata1: bus probe begin ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: limiting speed to UDMA7:PIO5 ata1.00: ata_dev_read_id: ENTER ata1.00: failed to IDENTIFY (I/O error, err_mask=0x40) ata1.00: disabled ata_port_probe: ata1: bus probe end scsi_alloc_sdev: Allocation failure during SCSI scanning, some SCSI devices might not be configured The FROZEN flag added in that commit is only cleared by the new EH code, which is not used by ipr. Clear this flag in the SAS code if we don't support new EH. Reported-by: Benjamin Herrenschmidt Signed-off-by: Nishanth Aravamudan Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index d51f979..927f968 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -3797,6 +3797,12 @@ EXPORT_SYMBOL_GPL(ata_sas_port_alloc); */ int ata_sas_port_start(struct ata_port *ap) { + /* + * the port is marked as frozen at allocation time, but if we don't + * have new eh, we won't thaw it + */ + if (!ap->ops->error_handler) + ap->pflags &= ~ATA_PFLAG_FROZEN; return 0; } EXPORT_SYMBOL_GPL(ata_sas_port_start); -- cgit v0.10.2 From f920fe1cb74191a780d88937f36994231a8faba1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Pawe=C5=82=20Drewniak?= Date: Fri, 24 Jun 2011 02:07:35 -0400 Subject: pata_marvell: Add support for 88SE91A0, 88SE91A4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch enables support for Marvell IDE PATA controllers found on Asus P8P67LE motherboard. The formatting has been corrected and I also received a report from two users of this motherboard that the patch works. Signed-off-by: Paweł Drewniak Signed-off-by: Jeff Garzik diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 75a6a0c..5d7f58a 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -161,6 +161,9 @@ static const struct pci_device_id marvell_pci_tbl[] = { { PCI_DEVICE(0x11AB, 0x6121), }, { PCI_DEVICE(0x11AB, 0x6123), }, { PCI_DEVICE(0x11AB, 0x6145), }, + { PCI_DEVICE(0x1B4B, 0x91A0), }, + { PCI_DEVICE(0x1B4B, 0x91A4), }, + { } /* terminate list */ }; -- cgit v0.10.2