From f450c1504d3ff6aace3927c805bdea0ac0669efd Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Sun, 10 Jul 2011 19:31:29 -0700
Subject: hwmon: (pmbus) Use long variables for register to data conversions

Using integer variable types for register to data conversions can cause
overflows especially for power calculations, which are in microwatt.
Use long variables instead.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>
Cc: stable@kernel.org # 2.6.39+

diff --git a/drivers/hwmon/pmbus_core.c b/drivers/hwmon/pmbus_core.c
index 744672c..8e31a8e 100644
--- a/drivers/hwmon/pmbus_core.c
+++ b/drivers/hwmon/pmbus_core.c
@@ -362,8 +362,8 @@ static struct pmbus_data *pmbus_update_device(struct device *dev)
  * Convert linear sensor values to milli- or micro-units
  * depending on sensor type.
  */
-static int pmbus_reg2data_linear(struct pmbus_data *data,
-				 struct pmbus_sensor *sensor)
+static long pmbus_reg2data_linear(struct pmbus_data *data,
+				  struct pmbus_sensor *sensor)
 {
 	s16 exponent;
 	s32 mantissa;
@@ -397,15 +397,15 @@ static int pmbus_reg2data_linear(struct pmbus_data *data,
 	else
 		val >>= -exponent;
 
-	return (int)val;
+	return val;
 }
 
 /*
  * Convert direct sensor values to milli- or micro-units
  * depending on sensor type.
  */
-static int pmbus_reg2data_direct(struct pmbus_data *data,
-				 struct pmbus_sensor *sensor)
+static long pmbus_reg2data_direct(struct pmbus_data *data,
+				  struct pmbus_sensor *sensor)
 {
 	long val = (s16) sensor->data;
 	long m, b, R;
@@ -440,12 +440,12 @@ static int pmbus_reg2data_direct(struct pmbus_data *data,
 		R++;
 	}
 
-	return (int)((val - b) / m);
+	return (val - b) / m;
 }
 
-static int pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
+static long pmbus_reg2data(struct pmbus_data *data, struct pmbus_sensor *sensor)
 {
-	int val;
+	long val;
 
 	if (data->info->direct[sensor->class])
 		val = pmbus_reg2data_direct(data, sensor);
@@ -619,7 +619,7 @@ static int pmbus_get_boolean(struct pmbus_data *data, int index, int *val)
 	if (!s1 && !s2)
 		*val = !!regval;
 	else {
-		int v1, v2;
+		long v1, v2;
 		struct pmbus_sensor *sensor1, *sensor2;
 
 		sensor1 = &data->sensors[s1];
@@ -661,7 +661,7 @@ static ssize_t pmbus_show_sensor(struct device *dev,
 	if (sensor->data < 0)
 		return sensor->data;
 
-	return snprintf(buf, PAGE_SIZE, "%d\n", pmbus_reg2data(data, sensor));
+	return snprintf(buf, PAGE_SIZE, "%ld\n", pmbus_reg2data(data, sensor));
 }
 
 static ssize_t pmbus_set_sensor(struct device *dev,
-- 
cgit v0.10.2


From 7e97bbba62754ea86e191b99c6978476198ecb99 Mon Sep 17 00:00:00 2001
From: Guenter Roeck <guenter.roeck@ericsson.com>
Date: Thu, 14 Jul 2011 14:18:03 -0700
Subject: hwmon: (adm1275) Fix coefficients per datasheet revision B

Coefficients to convert chip register values to voltage/current have been
slightly changed in revision B of the chip datasheet. Update driver coefficients
to match the coefficients in the datasheet.

Signed-off-by: Guenter Roeck <guenter.roeck@ericsson.com>
Acked-by: Jean Delvare <khali@linux-fr.org>

diff --git a/drivers/hwmon/adm1275.c b/drivers/hwmon/adm1275.c
index b9b7caf..8bc1bd6 100644
--- a/drivers/hwmon/adm1275.c
+++ b/drivers/hwmon/adm1275.c
@@ -53,23 +53,23 @@ static int adm1275_probe(struct i2c_client *client,
 	info->direct[PSC_VOLTAGE_IN] = true;
 	info->direct[PSC_VOLTAGE_OUT] = true;
 	info->direct[PSC_CURRENT_OUT] = true;
-	info->m[PSC_CURRENT_OUT] = 800;
+	info->m[PSC_CURRENT_OUT] = 807;
 	info->b[PSC_CURRENT_OUT] = 20475;
 	info->R[PSC_CURRENT_OUT] = -1;
 	info->func[0] = PMBUS_HAVE_IOUT | PMBUS_HAVE_STATUS_IOUT;
 
 	if (config & ADM1275_VRANGE) {
-		info->m[PSC_VOLTAGE_IN] = 19045;
+		info->m[PSC_VOLTAGE_IN] = 19199;
 		info->b[PSC_VOLTAGE_IN] = 0;
 		info->R[PSC_VOLTAGE_IN] = -2;
-		info->m[PSC_VOLTAGE_OUT] = 19045;
+		info->m[PSC_VOLTAGE_OUT] = 19199;
 		info->b[PSC_VOLTAGE_OUT] = 0;
 		info->R[PSC_VOLTAGE_OUT] = -2;
 	} else {
-		info->m[PSC_VOLTAGE_IN] = 6666;
+		info->m[PSC_VOLTAGE_IN] = 6720;
 		info->b[PSC_VOLTAGE_IN] = 0;
 		info->R[PSC_VOLTAGE_IN] = -1;
-		info->m[PSC_VOLTAGE_OUT] = 6666;
+		info->m[PSC_VOLTAGE_OUT] = 6720;
 		info->b[PSC_VOLTAGE_OUT] = 0;
 		info->R[PSC_VOLTAGE_OUT] = -1;
 	}
-- 
cgit v0.10.2