From bae35d92b6a1b6fd8c699415ab90aeeea2a56bc3 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Tue, 24 Jul 2012 11:52:35 +0800 Subject: mac80211: don't re-init rate control when receiving mesh beacon Rate control is re-initialized whenever a beacon from a mesh peer received, breaking the algorithms and resulting in low performance. Return early from mesh_peer_init if we already established a link with this peer to avoid this. Signed-off-by: Chun-Yeow Yeoh [clarify commit message] Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index af671b9..fa642c7 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -362,6 +362,11 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata, spin_lock_bh(&sta->lock); sta->last_rx = jiffies; + if (sta->plink_state == NL80211_PLINK_ESTAB) { + spin_unlock_bh(&sta->lock); + return sta; + } + sta->sta.supp_rates[band] = rates; if (elems->ht_cap_elem && sdata->local->_oper_channel_type != NL80211_CHAN_NO_HT) -- cgit v0.10.2 From d545daba5357c1ca377a4fe917ccf4de3a3031e0 Mon Sep 17 00:00:00 2001 From: Mahesh Palivela Date: Tue, 24 Jul 2012 03:33:10 +0000 Subject: mac80211: VHT (11ac) association Insert VHT IEs into association frames to allow mac80211 to connect as a VHT client. Signed-off-by: Mahesh Palivela [clarify commit message] Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index bb61f77..3e2f03b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -359,6 +359,7 @@ enum ieee80211_sta_flags { IEEE80211_STA_NULLFUNC_ACKED = BIT(8), IEEE80211_STA_RESET_SIGNAL_AVE = BIT(9), IEEE80211_STA_DISABLE_40MHZ = BIT(10), + IEEE80211_STA_DISABLE_VHT = BIT(11), }; struct ieee80211_mgd_auth_data { diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index cef0c9e..725258c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -326,6 +326,26 @@ static void ieee80211_add_ht_ie(struct ieee80211_sub_if_data *sdata, ieee80211_ie_build_ht_cap(pos, &ht_cap, cap); } +static void ieee80211_add_vht_ie(struct ieee80211_sub_if_data *sdata, + struct sk_buff *skb, + struct ieee80211_supported_band *sband) +{ + u8 *pos; + u32 cap; + struct ieee80211_sta_vht_cap vht_cap; + + BUILD_BUG_ON(sizeof(vht_cap) != sizeof(sband->vht_cap)); + + memcpy(&vht_cap, &sband->vht_cap, sizeof(vht_cap)); + + /* determine capability flags */ + cap = vht_cap.cap; + + /* reserve and fill IE */ + pos = skb_put(skb, sizeof(struct ieee80211_vht_capabilities) + 2); + ieee80211_ie_build_vht_cap(pos, &vht_cap, cap); +} + static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; @@ -371,6 +391,7 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) 4 + /* power capability */ 2 + 2 * sband->n_channels + /* supported channels */ 2 + sizeof(struct ieee80211_ht_cap) + /* HT */ + 2 + sizeof(struct ieee80211_vht_capabilities) + /* VHT */ assoc_data->ie_len + /* extra IEs */ 9, /* WMM */ GFP_KERNEL); @@ -503,6 +524,9 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata) ieee80211_add_ht_ie(sdata, skb, assoc_data->ap_ht_param, sband, local->oper_channel, ifmgd->ap_smps); + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) + ieee80211_add_vht_ie(sdata, skb, sband); + /* if present, add any custom non-vendor IEs that go after HT */ if (assoc_data->ie_len && assoc_data->ie) { noffset = ieee80211_ie_split_vendor(assoc_data->ie, @@ -3301,6 +3325,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N; ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; + ifmgd->flags &= ~IEEE80211_STA_DISABLE_VHT; ifmgd->beacon_crc_valid = false; @@ -3316,13 +3341,16 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_TKIP || req->crypto.ciphers_pairwise[i] == WLAN_CIPHER_SUITE_WEP104) { ifmgd->flags |= IEEE80211_STA_DISABLE_11N; + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; netdev_info(sdata->dev, - "disabling HT due to WEP/TKIP use\n"); + "disabling HT/VHT due to WEP/TKIP use\n"); } } - if (req->flags & ASSOC_REQ_DISABLE_HT) + if (req->flags & ASSOC_REQ_DISABLE_HT) { ifmgd->flags |= IEEE80211_STA_DISABLE_11N; + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; + } /* Also disable HT if we don't support it or the AP doesn't use WMM */ sband = local->hw.wiphy->bands[req->bss->channel->band]; @@ -3333,6 +3361,14 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, "disabling HT as WMM/QoS is not supported\n"); } + /* disable VHT if we don't support it or the AP doesn't use WMM */ + if (!sband->vht_cap.vht_supported || + local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used) { + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; + netdev_info(sdata->dev, + "disabling VHT as WMM/QoS is not supported\n"); + } + memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); memcpy(&ifmgd->ht_capa_mask, &req->ht_capa_mask, sizeof(ifmgd->ht_capa_mask)); -- cgit v0.10.2 From 7eeff74c29259e9cb7765e3845c0b74057f744da Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jul 2012 10:27:27 +0200 Subject: mac80211: don't react to beacon loss if HW monitoring If the HW is monitoring connection loss (as advertised by IEEE80211_HW_CONNECTION_MONITOR) but not filtering beacons (IEEE80211_VIF_BEACON_FILTER) then mac80211 will still start the beacon loss timer and if a few beacons are lost, e.g. due to scanning, drop the connection. If the hardware doesn't advertise connection monitoring, then it won't drop the connection right away but probe the AP, which is intended, but due to the logic in the timer when connection monitoring is done it assumes the connection was actually lost. Fix this problem by not starting the timer when the HW does connection monitoring. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 725258c..81b2269 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -146,6 +146,9 @@ void ieee80211_sta_reset_beacon_monitor(struct ieee80211_sub_if_data *sdata) if (sdata->vif.driver_flags & IEEE80211_VIF_BEACON_FILTER) return; + if (sdata->local->hw.flags & IEEE80211_HW_CONNECTION_MONITOR) + return; + mod_timer(&sdata->u.mgd.bcn_mon_timer, round_jiffies_up(jiffies + sdata->u.mgd.beacon_timeout)); } -- cgit v0.10.2 From 8c7d857c4a4a552d8d3e1b2e24e1864ec2989285 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Wed, 25 Jul 2012 01:42:36 +0300 Subject: mac80211: don't call mgd_prepare_tx when associated This doesn't make any sense since we are expected to be on the medium or at least to Tx only when we are on the right channel and the AP/GO can hear us. Move the call to mgd_prepare_tx() for deauth to be only done in case we're sending a deauth while not associated. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 81b2269..f0d6fa2 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -610,8 +610,6 @@ static void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; - drv_mgd_prepare_tx(local, sdata); - ieee80211_tx_skb(sdata, skb); } } @@ -3504,14 +3502,17 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, req->bssid, req->reason_code); if (ifmgd->associated && - ether_addr_equal(ifmgd->associated->bssid, req->bssid)) + ether_addr_equal(ifmgd->associated->bssid, req->bssid)) { ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, req->reason_code, true, frame_buf); - else + } else { + drv_mgd_prepare_tx(sdata->local, sdata); ieee80211_send_deauth_disassoc(sdata, req->bssid, IEEE80211_STYPE_DEAUTH, req->reason_code, true, frame_buf); + } + mutex_unlock(&ifmgd->mtx); __cfg80211_send_deauth(sdata->dev, frame_buf, DEAUTH_DISASSOC_LEN); -- cgit v0.10.2 From e21768928d73df55e648869d3ae159475d1e4b7d Mon Sep 17 00:00:00 2001 From: Vladimir Kondratiev Date: Wed, 25 Jul 2012 13:56:53 +0300 Subject: cfg80211: unify IE search Remove ah-hoc IE search code found in the ieee80211_bss_get_ie() and use cfg80211_find_ie() instead. Signed-off-by: Vladimir Kondratiev Signed-off-by: Johannes Berg diff --git a/net/wireless/util.c b/net/wireless/util.c index 26f8cd3..ce393dd 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -684,22 +684,10 @@ EXPORT_SYMBOL(cfg80211_classify8021d); const u8 *ieee80211_bss_get_ie(struct cfg80211_bss *bss, u8 ie) { - u8 *end, *pos; - - pos = bss->information_elements; - if (pos == NULL) + if (bss->information_elements == NULL) return NULL; - end = pos + bss->len_information_elements; - - while (pos + 1 < end) { - if (pos + 2 + pos[1] > end) - break; - if (pos[0] == ie) - return pos; - pos += 2 + pos[1]; - } - - return NULL; + return cfg80211_find_ie(ie, bss->information_elements, + bss->len_information_elements); } EXPORT_SYMBOL(ieee80211_bss_get_ie); -- cgit v0.10.2 From 930e1915e73dd12c5e3a0e6a5a4349bdb9ab0ab7 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Fri, 27 Jul 2012 10:11:32 +0300 Subject: wlcore: don't get the hlid from a queued skb There was a bug hiding here since the hlid was sometimes inferred from the sta, which might be invalid at this point. Instead, propagate the hlid from the skb-queue where we got the skb in the first place. Signed-off-by: Arik Nemtsov Acked-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index f0081f7..6ec29df 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -344,13 +344,12 @@ static void wl1271_tx_fill_hdr(struct wl1271 *wl, struct wl12xx_vif *wlvif, /* caller must hold wl->mutex */ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif, - struct sk_buff *skb, u32 buf_offset) + struct sk_buff *skb, u32 buf_offset, u8 hlid) { struct ieee80211_tx_info *info; u32 extra = 0; int ret = 0; u32 total_len; - u8 hlid; bool is_dummy; bool is_gem = false; @@ -359,9 +358,13 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif, return -EINVAL; } + if (hlid == WL12XX_INVALID_LINK_ID) { + wl1271_error("invalid hlid. dropping skb 0x%p", skb); + return -EINVAL; + } + info = IEEE80211_SKB_CB(skb); - /* TODO: handle dummy packets on multi-vifs */ is_dummy = wl12xx_is_dummy_packet(wl, skb); if ((wl->quirks & WLCORE_QUIRK_TKIP_HEADER_SPACE) && @@ -386,11 +389,6 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif, is_gem = (cipher == WL1271_CIPHER_SUITE_GEM); } - hlid = wl12xx_tx_get_hlid(wl, wlvif, skb); - if (hlid == WL12XX_INVALID_LINK_ID) { - wl1271_error("invalid hlid. dropping skb 0x%p", skb); - return -EINVAL; - } ret = wl1271_tx_allocate(wl, wlvif, skb, extra, buf_offset, hlid, is_gem); @@ -517,7 +515,8 @@ static struct sk_buff *wl12xx_lnk_skb_dequeue(struct wl1271 *wl, } static struct sk_buff *wl12xx_vif_skb_dequeue(struct wl1271 *wl, - struct wl12xx_vif *wlvif) + struct wl12xx_vif *wlvif, + u8 *hlid) { struct sk_buff *skb = NULL; int i, h, start_hlid; @@ -544,10 +543,11 @@ static struct sk_buff *wl12xx_vif_skb_dequeue(struct wl1271 *wl, if (!skb) wlvif->last_tx_hlid = 0; + *hlid = wlvif->last_tx_hlid; return skb; } -static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl) +static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl, u8 *hlid) { unsigned long flags; struct wl12xx_vif *wlvif = wl->last_wlvif; @@ -556,7 +556,7 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl) /* continue from last wlvif (round robin) */ if (wlvif) { wl12xx_for_each_wlvif_continue(wl, wlvif) { - skb = wl12xx_vif_skb_dequeue(wl, wlvif); + skb = wl12xx_vif_skb_dequeue(wl, wlvif, hlid); if (skb) { wl->last_wlvif = wlvif; break; @@ -565,13 +565,15 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl) } /* dequeue from the system HLID before the restarting wlvif list */ - if (!skb) + if (!skb) { skb = wl12xx_lnk_skb_dequeue(wl, &wl->links[wl->system_hlid]); + *hlid = wl->system_hlid; + } /* do a new pass over the wlvif list */ if (!skb) { wl12xx_for_each_wlvif(wl, wlvif) { - skb = wl12xx_vif_skb_dequeue(wl, wlvif); + skb = wl12xx_vif_skb_dequeue(wl, wlvif, hlid); if (skb) { wl->last_wlvif = wlvif; break; @@ -591,6 +593,7 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl) int q; skb = wl->dummy_packet; + *hlid = wl->system_hlid; q = wl1271_tx_get_queue(skb_get_queue_mapping(skb)); spin_lock_irqsave(&wl->wl_lock, flags); WARN_ON_ONCE(wl->tx_queue_count[q] <= 0); @@ -602,7 +605,7 @@ static struct sk_buff *wl1271_skb_dequeue(struct wl1271 *wl) } static void wl1271_skb_queue_head(struct wl1271 *wl, struct wl12xx_vif *wlvif, - struct sk_buff *skb) + struct sk_buff *skb, u8 hlid) { unsigned long flags; int q = wl1271_tx_get_queue(skb_get_queue_mapping(skb)); @@ -610,7 +613,6 @@ static void wl1271_skb_queue_head(struct wl1271 *wl, struct wl12xx_vif *wlvif, if (wl12xx_is_dummy_packet(wl, skb)) { set_bit(WL1271_FLAG_DUMMY_PACKET_PENDING, &wl->flags); } else { - u8 hlid = wl12xx_tx_get_hlid(wl, wlvif, skb); skb_queue_head(&wl->links[hlid].tx_queue[q], skb); /* make sure we dequeue the same packet next time */ @@ -686,26 +688,30 @@ int wlcore_tx_work_locked(struct wl1271 *wl) unsigned long active_hlids[BITS_TO_LONGS(WL12XX_MAX_LINKS)] = {0}; int ret = 0; int bus_ret = 0; + u8 hlid; if (unlikely(wl->state == WL1271_STATE_OFF)) return 0; - while ((skb = wl1271_skb_dequeue(wl))) { + while ((skb = wl1271_skb_dequeue(wl, &hlid))) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); bool has_data = false; wlvif = NULL; if (!wl12xx_is_dummy_packet(wl, skb) && info->control.vif) wlvif = wl12xx_vif_to_data(info->control.vif); + else + hlid = wl->system_hlid; has_data = wlvif && wl1271_tx_is_data_present(skb); - ret = wl1271_prepare_tx_frame(wl, wlvif, skb, buf_offset); + ret = wl1271_prepare_tx_frame(wl, wlvif, skb, buf_offset, + hlid); if (ret == -EAGAIN) { /* * Aggregation buffer is full. * Flush buffer and try again. */ - wl1271_skb_queue_head(wl, wlvif, skb); + wl1271_skb_queue_head(wl, wlvif, skb, hlid); buf_offset = wlcore_hw_pre_pkt_send(wl, buf_offset, last_len); @@ -722,7 +728,7 @@ int wlcore_tx_work_locked(struct wl1271 *wl) * Firmware buffer is full. * Queue back last skb, and stop aggregating. */ - wl1271_skb_queue_head(wl, wlvif, skb); + wl1271_skb_queue_head(wl, wlvif, skb, hlid); /* No work left, avoid scheduling redundant tx work */ set_bit(WL1271_FLAG_FW_TX_BUSY, &wl->flags); goto out_ack; @@ -732,7 +738,7 @@ int wlcore_tx_work_locked(struct wl1271 *wl) * fw still expects dummy packet, * so re-enqueue it */ - wl1271_skb_queue_head(wl, wlvif, skb); + wl1271_skb_queue_head(wl, wlvif, skb, hlid); else ieee80211_free_txskb(wl->hw, skb); goto out_ack; -- cgit v0.10.2 From 2b2b64380785bdcaaa9a123e7e5829acc749c4ca Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Fri, 27 Jul 2012 10:11:33 +0300 Subject: wlcore: op_tx: pass sta explicitly when inferring frame hlid avoid using the skb CB for getting the appropriate sta. Signed-off-by: Arik Nemtsov Acked-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 7254860..5efd591 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1197,7 +1197,7 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) mapping = skb_get_queue_mapping(skb); q = wl1271_tx_get_queue(mapping); - hlid = wl12xx_tx_get_hlid(wl, wlvif, skb); + hlid = wl12xx_tx_get_hlid(wl, wlvif, skb, info->control.sta); spin_lock_irqsave(&wl->wl_lock, flags); diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 6ec29df..1a2f31c 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -130,16 +130,13 @@ bool wl12xx_is_dummy_packet(struct wl1271 *wl, struct sk_buff *skb) } EXPORT_SYMBOL(wl12xx_is_dummy_packet); -u8 wl12xx_tx_get_hlid_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif, - struct sk_buff *skb) +static u8 wl12xx_tx_get_hlid_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct sk_buff *skb, struct ieee80211_sta *sta) { - struct ieee80211_tx_info *control = IEEE80211_SKB_CB(skb); - - if (control->control.sta) { + if (sta) { struct wl1271_station *wl_sta; - wl_sta = (struct wl1271_station *) - control->control.sta->drv_priv; + wl_sta = (struct wl1271_station *)sta->drv_priv; return wl_sta->hlid; } else { struct ieee80211_hdr *hdr; @@ -156,7 +153,7 @@ u8 wl12xx_tx_get_hlid_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif, } u8 wl12xx_tx_get_hlid(struct wl1271 *wl, struct wl12xx_vif *wlvif, - struct sk_buff *skb) + struct sk_buff *skb, struct ieee80211_sta *sta) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; @@ -164,7 +161,7 @@ u8 wl12xx_tx_get_hlid(struct wl1271 *wl, struct wl12xx_vif *wlvif, return wl->system_hlid; if (wlvif->bss_type == BSS_TYPE_AP_BSS) - return wl12xx_tx_get_hlid_ap(wl, wlvif, skb); + return wl12xx_tx_get_hlid_ap(wl, wlvif, skb, sta); if ((test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) || test_bit(WLVIF_FLAG_IBSS_JOINED, &wlvif->flags)) && diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h index 1e939b0..349520d 100644 --- a/drivers/net/wireless/ti/wlcore/tx.h +++ b/drivers/net/wireless/ti/wlcore/tx.h @@ -243,10 +243,8 @@ u8 wlcore_rate_to_idx(struct wl1271 *wl, u8 rate, enum ieee80211_band band); u32 wl1271_tx_enabled_rates_get(struct wl1271 *wl, u32 rate_set, enum ieee80211_band rate_band); u32 wl1271_tx_min_rate_get(struct wl1271 *wl, u32 rate_set); -u8 wl12xx_tx_get_hlid_ap(struct wl1271 *wl, struct wl12xx_vif *wlvif, - struct sk_buff *skb); u8 wl12xx_tx_get_hlid(struct wl1271 *wl, struct wl12xx_vif *wlvif, - struct sk_buff *skb); + struct sk_buff *skb, struct ieee80211_sta *sta); void wl1271_tx_reset_link_queues(struct wl1271 *wl, u8 hlid); void wl1271_handle_tx_low_watermark(struct wl1271 *wl); bool wl12xx_is_dummy_packet(struct wl1271 *wl, struct sk_buff *skb); -- cgit v0.10.2 From ab09587740fddf6b4116be7b6716ab47f34d2634 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Fri, 27 Jul 2012 12:33:22 +0300 Subject: mac80211: add PS flag to bss_conf Currently, ps mode is indicated per device (rather than per interface), which doesn't make a lot of sense. Moreover, there are subtle bugs caused by the inability to indicate ps change along with other changes (e.g. when the AP deauth us, we'd like to indicate CHANGED_PS | CHANGED_ASSOC, as changing PS before notifying about disassociation will result in null-packets being sent (if IEEE80211_HW_SUPPORTS_DYNAMIC_PS) while the sta is already disconnected.) Keep the current per-device notifications, and add parallel per-vif notifications. In order to keep it simple, the per-device ps and the per-vif ps are orthogonal - the per-vif ps configuration is determined only by the user configuration (enable/disable) and the connection state, and is not affected by other vifs state and (temporary) dynamic_ps/offchannel operations (unlike per-device ps). Signed-off-by: Eliad Peller Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index bb86aa6..d67d3bb 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -171,6 +171,7 @@ struct ieee80211_low_level_stats { * @BSS_CHANGED_IDLE: Idle changed for this BSS/interface. * @BSS_CHANGED_SSID: SSID changed for this BSS (AP mode) * @BSS_CHANGED_AP_PROBE_RESP: Probe Response changed for this BSS (AP mode) + * @BSS_CHANGED_PS: PS changed for this BSS (STA mode) */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -190,6 +191,7 @@ enum ieee80211_bss_change { BSS_CHANGED_IDLE = 1<<14, BSS_CHANGED_SSID = 1<<15, BSS_CHANGED_AP_PROBE_RESP = 1<<16, + BSS_CHANGED_PS = 1<<17, /* when adding here, make sure to change ieee80211_reconfig */ }; @@ -266,6 +268,8 @@ enum ieee80211_rssi_event { * @idle: This interface is idle. There's also a global idle flag in the * hardware config which may be more appropriate depending on what * your driver/device needs to do. + * @ps: power-save mode (STA only). This flag is NOT affected by + * offchannel/dynamic_ps operations. * @ssid: The SSID of the current vif. Only valid in AP-mode. * @ssid_len: Length of SSID given in @ssid. * @hidden_ssid: The SSID of the current vif is hidden. Only valid in AP-mode. @@ -296,6 +300,7 @@ struct ieee80211_bss_conf { bool arp_filter_enabled; bool qos; bool idle; + bool ps; u8 ssid[IEEE80211_MAX_SSID_LEN]; size_t ssid_len; bool hidden_ssid; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index d41974a..06b8d39 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1285,9 +1285,10 @@ static int ieee80211_change_station(struct wiphy *wiphy, mutex_unlock(&local->sta_mtx); if (sdata->vif.type == NL80211_IFTYPE_STATION && - params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) + params->sta_flags_mask & BIT(NL80211_STA_FLAG_AUTHORIZED)) { ieee80211_recalc_ps(local, -1); - + ieee80211_recalc_ps_vif(sdata); + } return 0; } @@ -2079,6 +2080,7 @@ static int ieee80211_set_power_mgmt(struct wiphy *wiphy, struct net_device *dev, ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_PS); ieee80211_recalc_ps(local, -1); + ieee80211_recalc_ps_vif(sdata); return 0; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 3e2f03b..8e65ad9 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1203,6 +1203,7 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, void ieee80211_send_pspoll(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata); void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency); +void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata); int ieee80211_max_network_latency(struct notifier_block *nb, unsigned long data, void *dummy); int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f0d6fa2..ea46c64 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1032,6 +1032,16 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) ieee80211_change_ps(local); } +void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata) +{ + bool ps_allowed = ieee80211_powersave_allowed(sdata); + + if (sdata->vif.bss_conf.ps != ps_allowed) { + sdata->vif.bss_conf.ps = ps_allowed; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_PS); + } +} + void ieee80211_dynamic_ps_disable_work(struct work_struct *work) { struct ieee80211_local *local = @@ -1335,6 +1345,8 @@ static void ieee80211_set_associated(struct ieee80211_sub_if_data *sdata, ieee80211_recalc_smps(local); mutex_unlock(&local->iflist_mtx); + ieee80211_recalc_ps_vif(sdata); + netif_tx_start_all_queues(sdata->dev); netif_carrier_on(sdata->dev); } @@ -1396,6 +1408,9 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, } local->ps_sdata = NULL; + /* disable per-vif ps */ + ieee80211_recalc_ps_vif(sdata); + /* flush out any pending frame (e.g. DELBA) before deauth/disassoc */ if (tx) drv_flush(local, false); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 39b82fe..037d148 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1359,7 +1359,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) switch (sdata->vif.type) { case NL80211_IFTYPE_STATION: changed |= BSS_CHANGED_ASSOC | - BSS_CHANGED_ARP_FILTER; + BSS_CHANGED_ARP_FILTER | + BSS_CHANGED_PS; mutex_lock(&sdata->u.mgd.mtx); ieee80211_bss_info_change_notify(sdata, changed); mutex_unlock(&sdata->u.mgd.mtx); -- cgit v0.10.2 From 36323f817af0376c78612cfdab714b0feb05fea5 Mon Sep 17 00:00:00 2001 From: Thomas Huehn Date: Mon, 23 Jul 2012 21:33:42 +0200 Subject: mac80211: move TX station pointer and restructure TX Remove the control.sta pointer from ieee80211_tx_info to free up sufficient space in the TX skb control buffer for the upcoming Transmit Power Control (TPC). Instead, the pointer is now on the stack in a new control struct that is passed as a function parameter to the drivers' tx method. Signed-off-by: Thomas Huehn Signed-off-by: Alina Friedrichsen Signed-off-by: Felix Fietkau [reworded commit message] Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index 689a71c..154a496 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1661,7 +1661,9 @@ static void adm8211_tx_raw(struct ieee80211_hw *dev, struct sk_buff *skb, } /* Put adm8211_tx_hdr on skb and transmit */ -static void adm8211_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +static void adm8211_tx(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct adm8211_tx_hdr *txhdr; size_t payload_len, hdrlen; diff --git a/drivers/net/wireless/at76c50x-usb.c b/drivers/net/wireless/at76c50x-usb.c index efc162e..abb520d 100644 --- a/drivers/net/wireless/at76c50x-usb.c +++ b/drivers/net/wireless/at76c50x-usb.c @@ -1726,7 +1726,9 @@ static void at76_mac80211_tx_callback(struct urb *urb) ieee80211_wake_queues(priv->hw); } -static void at76_mac80211_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void at76_mac80211_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct at76_priv *priv = hw->priv; struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer; diff --git a/drivers/net/wireless/ath/ath5k/mac80211-ops.c b/drivers/net/wireless/ath/ath5k/mac80211-ops.c index 260e7dc..934f04c 100644 --- a/drivers/net/wireless/ath/ath5k/mac80211-ops.c +++ b/drivers/net/wireless/ath/ath5k/mac80211-ops.c @@ -55,7 +55,8 @@ \********************/ static void -ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +ath5k_tx(struct ieee80211_hw *hw, struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct ath5k_hw *ah = hw->priv; u16 qnum = skb_get_queue_mapping(skb); diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index b09285c..7373e4b 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -280,6 +280,7 @@ struct ath_tx_control { struct ath_txq *txq; struct ath_node *an; u8 paprd; + struct ieee80211_sta *sta; }; #define ATH_TX_ERROR 0x01 diff --git a/drivers/net/wireless/ath/ath9k/htc.h b/drivers/net/wireless/ath/ath9k/htc.h index 936e920..b30596f 100644 --- a/drivers/net/wireless/ath/ath9k/htc.h +++ b/drivers/net/wireless/ath/ath9k/htc.h @@ -542,6 +542,7 @@ void ath9k_htc_stop_ani(struct ath9k_htc_priv *priv); int ath9k_tx_init(struct ath9k_htc_priv *priv); int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, + struct ieee80211_sta *sta, struct sk_buff *skb, u8 slot, bool is_cab); void ath9k_tx_cleanup(struct ath9k_htc_priv *priv); bool ath9k_htc_txq_setup(struct ath9k_htc_priv *priv, int subtype); diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c index 77d541f..f42d2eb 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_beacon.c @@ -326,7 +326,7 @@ static void ath9k_htc_send_buffered(struct ath9k_htc_priv *priv, goto next; } - ret = ath9k_htc_tx_start(priv, skb, tx_slot, true); + ret = ath9k_htc_tx_start(priv, NULL, skb, tx_slot, true); if (ret != 0) { ath9k_htc_tx_clear_slot(priv, tx_slot); dev_kfree_skb_any(skb); diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_main.c b/drivers/net/wireless/ath/ath9k/htc_drv_main.c index c785129..8a0ccf7 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_main.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_main.c @@ -856,7 +856,9 @@ set_timer: /* mac80211 Callbacks */ /**********************/ -static void ath9k_htc_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void ath9k_htc_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct ieee80211_hdr *hdr; struct ath9k_htc_priv *priv = hw->priv; @@ -883,7 +885,7 @@ static void ath9k_htc_tx(struct ieee80211_hw *hw, struct sk_buff *skb) goto fail_tx; } - ret = ath9k_htc_tx_start(priv, skb, slot, false); + ret = ath9k_htc_tx_start(priv, control->sta, skb, slot, false); if (ret != 0) { ath_dbg(common, XMIT, "Tx failed\n"); goto clear_slot; diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c index 47e61d0..06cdcb7 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_txrx.c @@ -333,12 +333,12 @@ static void ath9k_htc_tx_data(struct ath9k_htc_priv *priv, } int ath9k_htc_tx_start(struct ath9k_htc_priv *priv, + struct ieee80211_sta *sta, struct sk_buff *skb, u8 slot, bool is_cab) { struct ieee80211_hdr *hdr; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_sta *sta = tx_info->control.sta; struct ieee80211_vif *vif = tx_info->control.vif; struct ath9k_htc_sta *ista; struct ath9k_htc_vif *avp = NULL; diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6049d8b..4d8dc9f 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -694,7 +694,9 @@ mutex_unlock: return r; } -static void ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void ath9k_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct ath_softc *sc = hw->priv; struct ath_common *common = ath9k_hw_common(sc->sc_ah); @@ -754,6 +756,7 @@ static void ath9k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) memset(&txctl, 0, sizeof(struct ath_tx_control)); txctl.txq = sc->tx.txq_map[skb_get_queue_mapping(skb)]; + txctl.sta = control->sta; ath_dbg(common, XMIT, "transmitting packet, skb: %p\n", skb); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 2c9da6b..ef91f6c 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -1773,11 +1773,12 @@ static void ath_tx_send_normal(struct ath_softc *sc, struct ath_txq *txq, TX_STAT_INC(txq->axq_qnum, queued); } -static void setup_frame_info(struct ieee80211_hw *hw, struct sk_buff *skb, +static void setup_frame_info(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct sk_buff *skb, int framelen) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); - struct ieee80211_sta *sta = tx_info->control.sta; struct ieee80211_key_conf *hw_key = tx_info->control.hw_key; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; const struct ieee80211_rate *rate; @@ -1935,7 +1936,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb, { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_sta *sta = info->control.sta; + struct ieee80211_sta *sta = txctl->sta; struct ieee80211_vif *vif = info->control.vif; struct ath_softc *sc = hw->priv; struct ath_txq *txq = txctl->txq; @@ -1979,7 +1980,7 @@ int ath_tx_start(struct ieee80211_hw *hw, struct sk_buff *skb, !ieee80211_is_data(hdr->frame_control)) info->flags |= IEEE80211_TX_CTL_CLEAR_PS_FILT; - setup_frame_info(hw, skb, frmlen); + setup_frame_info(hw, sta, skb, frmlen); /* * At this point, the vif, hw_key and sta pointers in the tx control diff --git a/drivers/net/wireless/ath/carl9170/carl9170.h b/drivers/net/wireless/ath/carl9170/carl9170.h index 376be11..8f0cbc3 100644 --- a/drivers/net/wireless/ath/carl9170/carl9170.h +++ b/drivers/net/wireless/ath/carl9170/carl9170.h @@ -577,7 +577,9 @@ void carl9170_rx(struct ar9170 *ar, void *buf, unsigned int len); void carl9170_handle_command_response(struct ar9170 *ar, void *buf, u32 len); /* TX */ -void carl9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb); +void carl9170_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb); void carl9170_tx_janitor(struct work_struct *work); void carl9170_tx_process_status(struct ar9170 *ar, const struct carl9170_rsp *cmd); diff --git a/drivers/net/wireless/ath/carl9170/tx.c b/drivers/net/wireless/ath/carl9170/tx.c index 6a86814..84377cf 100644 --- a/drivers/net/wireless/ath/carl9170/tx.c +++ b/drivers/net/wireless/ath/carl9170/tx.c @@ -867,14 +867,15 @@ static bool carl9170_tx_cts_check(struct ar9170 *ar, return false; } -static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb) +static int carl9170_tx_prepare(struct ar9170 *ar, + struct ieee80211_sta *sta, + struct sk_buff *skb) { struct ieee80211_hdr *hdr; struct _carl9170_tx_superframe *txc; struct carl9170_vif_info *cvif; struct ieee80211_tx_info *info; struct ieee80211_tx_rate *txrate; - struct ieee80211_sta *sta; struct carl9170_tx_info *arinfo; unsigned int hw_queue; int i; @@ -910,8 +911,6 @@ static int carl9170_tx_prepare(struct ar9170 *ar, struct sk_buff *skb) else cvif = NULL; - sta = info->control.sta; - txc = (void *)skb_push(skb, sizeof(*txc)); memset(txc, 0, sizeof(*txc)); @@ -1457,20 +1456,21 @@ err_unlock_rcu: return false; } -void carl9170_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +void carl9170_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct ar9170 *ar = hw->priv; struct ieee80211_tx_info *info; - struct ieee80211_sta *sta; + struct ieee80211_sta *sta = control->sta; bool run; if (unlikely(!IS_STARTED(ar))) goto err_free; info = IEEE80211_SKB_CB(skb); - sta = info->control.sta; - if (unlikely(carl9170_tx_prepare(ar, skb))) + if (unlikely(carl9170_tx_prepare(ar, sta, skb))) goto err_free; carl9170_tx_accounting(ar, skb); diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b80352b..2ca4e88 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -3407,7 +3407,8 @@ static void b43_tx_work(struct work_struct *work) } static void b43_op_tx(struct ieee80211_hw *hw, - struct sk_buff *skb) + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct b43_wl *wl = hw_to_b43_wl(hw); diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 8156135..74d4c20 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2492,6 +2492,7 @@ static void b43legacy_tx_work(struct work_struct *work) } static void b43legacy_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, struct sk_buff *skb) { struct b43legacy_wl *wl = hw_to_b43legacy_wl(hw); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 9e79d47..a7be68d 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -264,7 +264,9 @@ static void brcms_set_basic_rate(struct brcm_rateset *rs, u16 rate, bool is_br) } } -static void brcms_ops_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void brcms_ops_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct brcms_info *wl = hw->priv; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -276,7 +278,7 @@ static void brcms_ops_tx(struct ieee80211_hw *hw, struct sk_buff *skb) goto done; } brcms_c_sendpkt_mac80211(wl->wlc, skb, hw); - tx_info->rate_driver_data[0] = tx_info->control.sta; + tx_info->rate_driver_data[0] = control->sta; done: spin_unlock_bh(&wl->lock); } diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index faec404..e252acb 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -460,7 +460,9 @@ il3945_build_tx_cmd_basic(struct il_priv *il, struct il_device_cmd *cmd, * start C_TX command process */ static int -il3945_tx_skb(struct il_priv *il, struct sk_buff *skb) +il3945_tx_skb(struct il_priv *il, + struct ieee80211_sta *sta, + struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -512,7 +514,7 @@ il3945_tx_skb(struct il_priv *il, struct sk_buff *skb) hdr_len = ieee80211_hdrlen(fc); /* Find idx into station table for destination station */ - sta_id = il_sta_id_or_broadcast(il, info->control.sta); + sta_id = il_sta_id_or_broadcast(il, sta); if (sta_id == IL_INVALID_STATION) { D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); goto drop; @@ -2859,7 +2861,9 @@ il3945_mac_stop(struct ieee80211_hw *hw) } static void -il3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +il3945_mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct il_priv *il = hw->priv; @@ -2868,7 +2872,7 @@ il3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - if (il3945_tx_skb(il, skb)) + if (il3945_tx_skb(il, control->sta, skb)) dev_kfree_skb_any(skb); D_MAC80211("leave\n"); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 34f61a0..eac4dc8 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -1526,8 +1526,11 @@ il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb, } static void -il4965_tx_cmd_build_rate(struct il_priv *il, struct il_tx_cmd *tx_cmd, - struct ieee80211_tx_info *info, __le16 fc) +il4965_tx_cmd_build_rate(struct il_priv *il, + struct il_tx_cmd *tx_cmd, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + __le16 fc) { const u8 rts_retry_limit = 60; u32 rate_flags; @@ -1561,9 +1564,7 @@ il4965_tx_cmd_build_rate(struct il_priv *il, struct il_tx_cmd *tx_cmd, rate_idx = info->control.rates[0].idx; if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0 || rate_idx > RATE_COUNT_LEGACY) - rate_idx = - rate_lowest_index(&il->bands[info->band], - info->control.sta); + rate_idx = rate_lowest_index(&il->bands[info->band], sta); /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ if (info->band == IEEE80211_BAND_5GHZ) rate_idx += IL_FIRST_OFDM_RATE; @@ -1630,11 +1631,12 @@ il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info, * start C_TX command process */ int -il4965_tx_skb(struct il_priv *il, struct sk_buff *skb) +il4965_tx_skb(struct il_priv *il, + struct ieee80211_sta *sta, + struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_sta *sta = info->control.sta; struct il_station_priv *sta_priv = NULL; struct il_tx_queue *txq; struct il_queue *q; @@ -1680,7 +1682,7 @@ il4965_tx_skb(struct il_priv *il, struct sk_buff *skb) sta_id = il->hw_params.bcast_id; else { /* Find idx into station table for destination station */ - sta_id = il_sta_id_or_broadcast(il, info->control.sta); + sta_id = il_sta_id_or_broadcast(il, sta); if (sta_id == IL_INVALID_STATION) { D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1); @@ -1786,7 +1788,7 @@ il4965_tx_skb(struct il_priv *il, struct sk_buff *skb) /* TODO need this for burst mode later on */ il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id); - il4965_tx_cmd_build_rate(il, tx_cmd, info, fc); + il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); il_update_stats(il, true, fc, len); /* @@ -5828,7 +5830,9 @@ il4965_mac_stop(struct ieee80211_hw *hw) } void -il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +il4965_mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct il_priv *il = hw->priv; @@ -5837,7 +5841,7 @@ il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - if (il4965_tx_skb(il, skb)) + if (il4965_tx_skb(il, control->sta, skb)) dev_kfree_skb_any(skb); D_MACDUMP("leave\n"); diff --git a/drivers/net/wireless/iwlegacy/4965.h b/drivers/net/wireless/iwlegacy/4965.h index 1db6776..2d092f3 100644 --- a/drivers/net/wireless/iwlegacy/4965.h +++ b/drivers/net/wireless/iwlegacy/4965.h @@ -78,7 +78,9 @@ int il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq, int il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq); void il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags, struct ieee80211_tx_info *info); -int il4965_tx_skb(struct il_priv *il, struct sk_buff *skb); +int il4965_tx_skb(struct il_priv *il, + struct ieee80211_sta *sta, + struct sk_buff *skb); int il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 tid, u16 * ssn); int il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif, @@ -163,7 +165,9 @@ void il4965_eeprom_release_semaphore(struct il_priv *il); int il4965_eeprom_check_version(struct il_priv *il); /* mac80211 handlers (for 4965) */ -void il4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb); +void il4965_mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb); int il4965_mac_start(struct ieee80211_hw *hw); void il4965_mac_stop(struct ieee80211_hw *hw); void il4965_configure_filter(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index 9bb16bd..f0b8c1f 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -201,7 +201,9 @@ void iwl_chswitch_done(struct iwl_priv *priv, bool is_success); /* tx */ -int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb); +int iwlagn_tx_skb(struct iwl_priv *priv, + struct ieee80211_sta *sta, + struct sk_buff *skb); int iwlagn_tx_agg_start(struct iwl_priv *priv, struct ieee80211_vif *vif, struct ieee80211_sta *sta, u16 tid, u16 *ssn); int iwlagn_tx_agg_oper(struct iwl_priv *priv, struct ieee80211_vif *vif, diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index a5f7bce..e64af60 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -511,14 +511,16 @@ static void iwlagn_mac_set_wakeup(struct ieee80211_hw *hw, bool enabled) } #endif -static void iwlagn_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void iwlagn_mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw); IWL_DEBUG_TX(priv, "dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate); - if (iwlagn_tx_skb(priv, skb)) + if (iwlagn_tx_skb(priv, control->sta, skb)) dev_kfree_skb_any(skb); } diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 5971a23..d17799b 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -127,6 +127,7 @@ static void iwlagn_tx_cmd_build_basic(struct iwl_priv *priv, static void iwlagn_tx_cmd_build_rate(struct iwl_priv *priv, struct iwl_tx_cmd *tx_cmd, struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, __le16 fc) { u32 rate_flags; @@ -187,8 +188,7 @@ static void iwlagn_tx_cmd_build_rate(struct iwl_priv *priv, if (info->control.rates[0].flags & IEEE80211_TX_RC_MCS || (rate_idx < 0) || (rate_idx > IWL_RATE_COUNT_LEGACY)) rate_idx = rate_lowest_index( - &priv->eeprom_data->bands[info->band], - info->control.sta); + &priv->eeprom_data->bands[info->band], sta); /* For 5 GHZ band, remap mac80211 rate indices into driver indices */ if (info->band == IEEE80211_BAND_5GHZ) rate_idx += IWL_FIRST_OFDM_RATE; @@ -291,7 +291,9 @@ static int iwl_sta_id_or_broadcast(struct iwl_rxon_context *context, /* * start REPLY_TX command process */ -int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) +int iwlagn_tx_skb(struct iwl_priv *priv, + struct ieee80211_sta *sta, + struct sk_buff *skb) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -345,7 +347,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) sta_id = ctx->bcast_sta_id; else { /* Find index into station table for destination station */ - sta_id = iwl_sta_id_or_broadcast(ctx, info->control.sta); + sta_id = iwl_sta_id_or_broadcast(ctx, sta); if (sta_id == IWL_INVALID_STATION) { IWL_DEBUG_DROP(priv, "Dropping - INVALID STATION: %pM\n", hdr->addr1); @@ -355,8 +357,8 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) IWL_DEBUG_TX(priv, "station Id %d\n", sta_id); - if (info->control.sta) - sta_priv = (void *)info->control.sta->drv_priv; + if (sta) + sta_priv = (void *)sta->drv_priv; if (sta_priv && sta_priv->asleep && (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) { @@ -397,7 +399,7 @@ int iwlagn_tx_skb(struct iwl_priv *priv, struct sk_buff *skb) /* TODO need this for burst mode later on */ iwlagn_tx_cmd_build_basic(priv, skb, tx_cmd, info, hdr, sta_id); - iwlagn_tx_cmd_build_rate(priv, tx_cmd, info, fc); + iwlagn_tx_cmd_build_rate(priv, tx_cmd, info, sta, fc); memset(&info->status, 0, sizeof(info->status)); diff --git a/drivers/net/wireless/libertas_tf/main.c b/drivers/net/wireless/libertas_tf/main.c index a034572..70018562 100644 --- a/drivers/net/wireless/libertas_tf/main.c +++ b/drivers/net/wireless/libertas_tf/main.c @@ -227,7 +227,9 @@ static void lbtf_free_adapter(struct lbtf_private *priv) lbtf_deb_leave(LBTF_DEB_MAIN); } -static void lbtf_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void lbtf_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct lbtf_private *priv = hw->priv; diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index 643f968..ed1386a 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -709,7 +709,9 @@ static bool mac80211_hwsim_tx_frame_no_nl(struct ieee80211_hw *hw, return ack; } -static void mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void mac80211_hwsim_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { bool ack; struct ieee80211_tx_info *txi; @@ -741,8 +743,8 @@ static void mac80211_hwsim_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (txi->control.vif) hwsim_check_magic(txi->control.vif); - if (txi->control.sta) - hwsim_check_sta_magic(txi->control.sta); + if (control->sta) + hwsim_check_sta_magic(control->sta); ieee80211_tx_info_clear_status(txi); diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 224e03a..5099e53 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -1830,12 +1830,14 @@ static inline void mwl8k_tx_count_packet(struct ieee80211_sta *sta, u8 tid) } static void -mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) +mwl8k_txq_xmit(struct ieee80211_hw *hw, + int index, + struct ieee80211_sta *sta, + struct sk_buff *skb) { struct mwl8k_priv *priv = hw->priv; struct ieee80211_tx_info *tx_info; struct mwl8k_vif *mwl8k_vif; - struct ieee80211_sta *sta; struct ieee80211_hdr *wh; struct mwl8k_tx_queue *txq; struct mwl8k_tx_desc *tx; @@ -1867,7 +1869,6 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) wh = &((struct mwl8k_dma_data *)skb->data)->wh; tx_info = IEEE80211_SKB_CB(skb); - sta = tx_info->control.sta; mwl8k_vif = MWL8K_VIF(tx_info->control.vif); if (tx_info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) { @@ -2019,8 +2020,8 @@ mwl8k_txq_xmit(struct ieee80211_hw *hw, int index, struct sk_buff *skb) tx->pkt_phys_addr = cpu_to_le32(dma); tx->pkt_len = cpu_to_le16(skb->len); tx->rate_info = 0; - if (!priv->ap_fw && tx_info->control.sta != NULL) - tx->peer_id = MWL8K_STA(tx_info->control.sta)->peer_id; + if (!priv->ap_fw && sta != NULL) + tx->peer_id = MWL8K_STA(sta)->peer_id; else tx->peer_id = 0; @@ -4364,7 +4365,9 @@ static void mwl8k_rx_poll(unsigned long data) /* * Core driver operations. */ -static void mwl8k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void mwl8k_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct mwl8k_priv *priv = hw->priv; int index = skb_get_queue_mapping(skb); @@ -4376,7 +4379,7 @@ static void mwl8k_tx(struct ieee80211_hw *hw, struct sk_buff *skb) return; } - mwl8k_txq_xmit(hw, index, skb); + mwl8k_txq_xmit(hw, index, control->sta, skb); } static int mwl8k_start(struct ieee80211_hw *hw) diff --git a/drivers/net/wireless/p54/lmac.h b/drivers/net/wireless/p54/lmac.h index 3d8d622..de1d46b 100644 --- a/drivers/net/wireless/p54/lmac.h +++ b/drivers/net/wireless/p54/lmac.h @@ -526,7 +526,9 @@ int p54_init_leds(struct p54_common *priv); void p54_unregister_leds(struct p54_common *priv); /* xmit functions */ -void p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb); +void p54_tx_80211(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb); int p54_tx_cancel(struct p54_common *priv, __le32 req_id); void p54_tx(struct p54_common *priv, struct sk_buff *skb); diff --git a/drivers/net/wireless/p54/main.c b/drivers/net/wireless/p54/main.c index 7cffea7..5e91ad0 100644 --- a/drivers/net/wireless/p54/main.c +++ b/drivers/net/wireless/p54/main.c @@ -158,7 +158,7 @@ static int p54_beacon_update(struct p54_common *priv, * to cancel the old beacon template by hand, instead the firmware * will release the previous one through the feedback mechanism. */ - p54_tx_80211(priv->hw, beacon); + p54_tx_80211(priv->hw, NULL, beacon); priv->tsf_high32 = 0; priv->tsf_low32 = 0; diff --git a/drivers/net/wireless/p54/txrx.c b/drivers/net/wireless/p54/txrx.c index f38786e..5861e13 100644 --- a/drivers/net/wireless/p54/txrx.c +++ b/drivers/net/wireless/p54/txrx.c @@ -676,8 +676,9 @@ int p54_rx(struct ieee80211_hw *dev, struct sk_buff *skb) EXPORT_SYMBOL_GPL(p54_rx); static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb, - struct ieee80211_tx_info *info, u8 *queue, - u32 *extra_len, u16 *flags, u16 *aid, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + u8 *queue, u32 *extra_len, u16 *flags, u16 *aid, bool *burst_possible) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; @@ -746,8 +747,8 @@ static void p54_tx_80211_header(struct p54_common *priv, struct sk_buff *skb, } } - if (info->control.sta) - *aid = info->control.sta->aid; + if (sta) + *aid = sta->aid; break; } } @@ -767,7 +768,9 @@ static u8 p54_convert_algo(u32 cipher) } } -void p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb) +void p54_tx_80211(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct p54_common *priv = dev->priv; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -784,7 +787,7 @@ void p54_tx_80211(struct ieee80211_hw *dev, struct sk_buff *skb) u8 nrates = 0, nremaining = 8; bool burst_allowed = false; - p54_tx_80211_header(priv, skb, info, &queue, &extra_len, + p54_tx_80211_header(priv, skb, info, control->sta, &queue, &extra_len, &hdr_flags, &aid, &burst_allowed); if (p54_tx_qos_accounting_alloc(priv, skb, queue)) { diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 8afb546..f991e8b 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1287,7 +1287,9 @@ void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp); /* * mac80211 handlers. */ -void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb); +void rt2x00mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb); int rt2x00mac_start(struct ieee80211_hw *hw); void rt2x00mac_stop(struct ieee80211_hw *hw); int rt2x00mac_add_interface(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index a6b88bd..a59048f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -194,7 +194,7 @@ static void rt2x00lib_bc_buffer_iter(void *data, u8 *mac, */ skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif); while (skb) { - rt2x00mac_tx(rt2x00dev->hw, skb); + rt2x00mac_tx(rt2x00dev->hw, NULL, skb); skb = ieee80211_get_buffered_bc(rt2x00dev->hw, vif); } } diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 4ff26c2..c3d0f2f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -99,7 +99,9 @@ static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev, return retval; } -void rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +void rt2x00mac_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct rt2x00_dev *rt2x00dev = hw->priv; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index f7e74a0..e488b94 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -315,6 +315,7 @@ static void rt2x00queue_create_tx_descriptor_plcp(struct rt2x00_dev *rt2x00dev, static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, struct txentry_desc *txdesc, + struct ieee80211_sta *sta, const struct rt2x00_rate *hwrate) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); @@ -322,11 +323,11 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; struct rt2x00_sta *sta_priv = NULL; - if (tx_info->control.sta) { + if (sta) { txdesc->u.ht.mpdu_density = - tx_info->control.sta->ht_cap.ampdu_density; + sta->ht_cap.ampdu_density; - sta_priv = sta_to_rt2x00_sta(tx_info->control.sta); + sta_priv = sta_to_rt2x00_sta(sta); txdesc->u.ht.wcid = sta_priv->wcid; } @@ -341,8 +342,8 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, * MIMO PS should be set to 1 for STA's using dynamic SM PS * when using more then one tx stream (>MCS7). */ - if (tx_info->control.sta && txdesc->u.ht.mcs > 7 && - ((tx_info->control.sta->ht_cap.cap & + if (sta && txdesc->u.ht.mcs > 7 && + ((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> IEEE80211_HT_CAP_SM_PS_SHIFT) == WLAN_HT_CAP_SM_PS_DYNAMIC) @@ -409,7 +410,8 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, static void rt2x00queue_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, struct sk_buff *skb, - struct txentry_desc *txdesc) + struct txentry_desc *txdesc, + struct ieee80211_sta *sta) { struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; @@ -503,7 +505,7 @@ static void rt2x00queue_create_tx_descriptor(struct rt2x00_dev *rt2x00dev, if (test_bit(REQUIRE_HT_TX_DESC, &rt2x00dev->cap_flags)) rt2x00queue_create_tx_descriptor_ht(rt2x00dev, skb, txdesc, - hwrate); + sta, hwrate); else rt2x00queue_create_tx_descriptor_plcp(rt2x00dev, skb, txdesc, hwrate); @@ -595,7 +597,7 @@ int rt2x00queue_write_tx_frame(struct data_queue *queue, struct sk_buff *skb, * after that we are free to use the skb->cb array * for our information. */ - rt2x00queue_create_tx_descriptor(queue->rt2x00dev, skb, &txdesc); + rt2x00queue_create_tx_descriptor(queue->rt2x00dev, skb, &txdesc, NULL); /* * All information is retrieved from the skb->cb array, @@ -740,7 +742,7 @@ int rt2x00queue_update_beacon_locked(struct rt2x00_dev *rt2x00dev, * after that we are free to use the skb->cb array * for our information. */ - rt2x00queue_create_tx_descriptor(rt2x00dev, intf->beacon->skb, &txdesc); + rt2x00queue_create_tx_descriptor(rt2x00dev, intf->beacon->skb, &txdesc, NULL); /* * Fill in skb descriptor diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index aceaf68..021d83e 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -244,7 +244,9 @@ static irqreturn_t rtl8180_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } -static void rtl8180_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +static void rtl8180_tx(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; @@ -710,7 +712,7 @@ static void rtl8180_beacon_work(struct work_struct *work) /* TODO: use actual beacon queue */ skb_set_queue_mapping(skb, 0); - rtl8180_tx(dev, skb); + rtl8180_tx(dev, NULL, skb); resched: /* diff --git a/drivers/net/wireless/rtl818x/rtl8187/dev.c b/drivers/net/wireless/rtl818x/rtl8187/dev.c index 71a30b0..05d8ca0 100644 --- a/drivers/net/wireless/rtl818x/rtl8187/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187/dev.c @@ -228,7 +228,9 @@ static void rtl8187_tx_cb(struct urb *urb) } } -static void rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +static void rtl8187_tx(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct rtl8187_priv *priv = dev->priv; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -1076,7 +1078,7 @@ static void rtl8187_beacon_work(struct work_struct *work) /* TODO: use actual beacon queue */ skb_set_queue_mapping(skb, 0); - rtl8187_tx(dev, skb); + rtl8187_tx(dev, NULL, skb); resched: /* diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 942e56b..59381fe 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -1341,9 +1341,8 @@ int rtl_send_smps_action(struct ieee80211_hw *hw, rtlpriv->cfg->ops->update_rate_tbl(hw, sta, 0); info->control.rates[0].idx = 0; - info->control.sta = sta; info->band = hw->conf.channel->band; - rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc); + rtlpriv->intf_ops->adapter_tx(hw, sta, skb, &tcb_desc); } err_free: return 0; diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index a18ad2a..a7c0e52 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -124,7 +124,9 @@ static void rtl_op_stop(struct ieee80211_hw *hw) mutex_unlock(&rtlpriv->locks.conf_mutex); } -static void rtl_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void rtl_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); @@ -138,8 +140,8 @@ static void rtl_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) if (!test_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status)) goto err_free; - if (!rtlpriv->intf_ops->waitq_insert(hw, skb)) - rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc); + if (!rtlpriv->intf_ops->waitq_insert(hw, control->sta, skb)) + rtlpriv->intf_ops->adapter_tx(hw, control->sta, skb, &tcb_desc); return; diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 80f75d3..aad9d44 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -504,7 +504,7 @@ static void _rtl_pci_tx_chk_waitq(struct ieee80211_hw *hw) _rtl_update_earlymode_info(hw, skb, &tcb_desc, tid); - rtlpriv->intf_ops->adapter_tx(hw, skb, &tcb_desc); + rtlpriv->intf_ops->adapter_tx(hw, NULL, skb, &tcb_desc); } } } @@ -929,7 +929,7 @@ static void _rtl_pci_prepare_bcn_tasklet(struct ieee80211_hw *hw) info = IEEE80211_SKB_CB(pskb); pdesc = &ring->desc[0]; rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *) pdesc, - info, pskb, BEACON_QUEUE, &tcb_desc); + info, NULL, pskb, BEACON_QUEUE, &tcb_desc); __skb_queue_tail(&ring->queue, pskb); @@ -1305,11 +1305,10 @@ int rtl_pci_reset_trx_ring(struct ieee80211_hw *hw) } static bool rtl_pci_tx_chk_waitq_insert(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, struct sk_buff *skb) { struct rtl_priv *rtlpriv = rtl_priv(hw); - struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_sta *sta = info->control.sta; struct rtl_sta_info *sta_entry = NULL; u8 tid = rtl_get_tid(skb); @@ -1337,13 +1336,14 @@ static bool rtl_pci_tx_chk_waitq_insert(struct ieee80211_hw *hw, return true; } -static int rtl_pci_tx(struct ieee80211_hw *hw, struct sk_buff *skb, - struct rtl_tcb_desc *ptcb_desc) +static int rtl_pci_tx(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct sk_buff *skb, + struct rtl_tcb_desc *ptcb_desc) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_sta_info *sta_entry = NULL; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - struct ieee80211_sta *sta = info->control.sta; struct rtl8192_tx_ring *ring; struct rtl_tx_desc *pdesc; u8 idx; @@ -1418,7 +1418,7 @@ static int rtl_pci_tx(struct ieee80211_hw *hw, struct sk_buff *skb, rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX); rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, - info, skb, hw_queue, ptcb_desc); + info, sta, skb, hw_queue, ptcb_desc); __skb_queue_tail(&ring->queue, skb); diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index 5216664..390d6d4 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -596,7 +596,9 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw, void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc_tx, - struct ieee80211_tx_info *info, struct sk_buff *skb, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + struct sk_buff *skb, u8 hw_queue, struct rtl_tcb_desc *tcb_desc) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -604,7 +606,6 @@ void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw, struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); bool defaultadapter = true; - struct ieee80211_sta *sta; u8 *pdesc = pdesc_tx; u16 seq_number; __le16 fc = hdr->frame_control; diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h index c4adb97..a7cdd51 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.h @@ -713,6 +713,7 @@ struct rx_desc_92c { void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc, struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, struct sk_buff *skb, u8 hw_queue, struct rtl_tcb_desc *ptcb_desc); bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c index 2e6eb35..27863d7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c @@ -496,7 +496,9 @@ static void _rtl_tx_desc_checksum(u8 *txdesc) void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc_tx, - struct ieee80211_tx_info *info, struct sk_buff *skb, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + struct sk_buff *skb, u8 queue_index, struct rtl_tcb_desc *tcb_desc) { @@ -504,7 +506,6 @@ void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw, struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); bool defaultadapter = true; - struct ieee80211_sta *sta = info->control.sta = info->control.sta; u8 *qc = ieee80211_get_qos_ctl(hdr); u8 tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; u16 seq_number; diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h index 332b06e..725c53a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.h @@ -420,7 +420,9 @@ struct sk_buff *rtl8192c_tx_aggregate_hdl(struct ieee80211_hw *, struct sk_buff_head *); void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc_tx, - struct ieee80211_tx_info *info, struct sk_buff *skb, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + struct sk_buff *skb, u8 queue_index, struct rtl_tcb_desc *tcb_desc); void rtl92cu_fill_fake_txdesc(struct ieee80211_hw *hw, u8 * pDesc, diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index f80690d..4686f34 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -551,7 +551,9 @@ static void _rtl92de_insert_emcontent(struct rtl_tcb_desc *ptcb_desc, void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc_tx, - struct ieee80211_tx_info *info, struct sk_buff *skb, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + struct sk_buff *skb, u8 hw_queue, struct rtl_tcb_desc *ptcb_desc) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -559,7 +561,6 @@ void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtlpriv); struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); - struct ieee80211_sta *sta = info->control.sta; u8 *pdesc = pdesc_tx; u16 seq_number; __le16 fc = hdr->frame_control; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h index 057a524..c1b5dfb 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.h +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.h @@ -730,6 +730,7 @@ struct rx_desc_92d { void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc, struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, struct sk_buff *skb, u8 hw_queue, struct rtl_tcb_desc *ptcb_desc); bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index 36d1cb3..28c53fb 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -591,14 +591,15 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc_tx, - struct ieee80211_tx_info *info, struct sk_buff *skb, + struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, + struct sk_buff *skb, u8 hw_queue, struct rtl_tcb_desc *ptcb_desc) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - struct ieee80211_sta *sta = info->control.sta; u8 *pdesc = pdesc_tx; u16 seq_number; __le16 fc = hdr->frame_control; diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.h b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h index 011e7b0..64dd66f 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.h +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.h @@ -31,6 +31,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc, struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, struct sk_buff *skb, u8 hw_queue, struct rtl_tcb_desc *ptcb_desc); void rtl92se_tx_fill_cmddesc(struct ieee80211_hw *hw, u8 *pdesc, bool firstseg, diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index aa970fc..9140469 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -848,8 +848,10 @@ static void _rtl_usb_transmit(struct ieee80211_hw *hw, struct sk_buff *skb, _rtl_submit_tx_urb(hw, _urb); } -static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, struct sk_buff *skb, - u16 hw_queue) +static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct sk_buff *skb, + u16 hw_queue) { struct rtl_priv *rtlpriv = rtl_priv(hw); struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); @@ -891,7 +893,7 @@ static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, struct sk_buff *skb, seq_number += 1; seq_number <<= 4; } - rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, info, skb, + rtlpriv->cfg->ops->fill_tx_desc(hw, hdr, (u8 *)pdesc, info, sta, skb, hw_queue, &tcb_desc); if (!ieee80211_has_morefrags(hdr->frame_control)) { if (qc) @@ -901,7 +903,9 @@ static void _rtl_usb_tx_preprocess(struct ieee80211_hw *hw, struct sk_buff *skb, rtlpriv->cfg->ops->led_control(hw, LED_CTL_TX); } -static int rtl_usb_tx(struct ieee80211_hw *hw, struct sk_buff *skb, +static int rtl_usb_tx(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct sk_buff *skb, struct rtl_tcb_desc *dummy) { struct rtl_usb *rtlusb = rtl_usbdev(rtl_usbpriv(hw)); @@ -913,7 +917,7 @@ static int rtl_usb_tx(struct ieee80211_hw *hw, struct sk_buff *skb, if (unlikely(is_hal_stop(rtlhal))) goto err_free; hw_queue = rtlusb->usb_mq_to_hwq(fc, skb_get_queue_mapping(skb)); - _rtl_usb_tx_preprocess(hw, skb, hw_queue); + _rtl_usb_tx_preprocess(hw, sta, skb, hw_queue); _rtl_usb_transmit(hw, skb, hw_queue); return NETDEV_TX_OK; @@ -923,6 +927,7 @@ err_free: } static bool rtl_usb_tx_chk_waitq_insert(struct ieee80211_hw *hw, + struct ieee80211_sta *sta, struct sk_buff *skb) { return false; diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index cdaa21f..40153e7 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -122,7 +122,7 @@ enum rt_eeprom_type { EEPROM_BOOT_EFUSE, }; -enum rtl_status { +enum ttl_status { RTL_STATUS_INTERFACE_START = 0, }; @@ -1418,6 +1418,7 @@ struct rtl_hal_ops { void (*fill_tx_desc) (struct ieee80211_hw *hw, struct ieee80211_hdr *hdr, u8 *pdesc_tx, struct ieee80211_tx_info *info, + struct ieee80211_sta *sta, struct sk_buff *skb, u8 hw_queue, struct rtl_tcb_desc *ptcb_desc); void (*fill_fake_txdesc) (struct ieee80211_hw *hw, u8 *pDesc, @@ -1475,11 +1476,15 @@ struct rtl_intf_ops { int (*adapter_start) (struct ieee80211_hw *hw); void (*adapter_stop) (struct ieee80211_hw *hw); - int (*adapter_tx) (struct ieee80211_hw *hw, struct sk_buff *skb, - struct rtl_tcb_desc *ptcb_desc); + int (*adapter_tx) (struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct sk_buff *skb, + struct rtl_tcb_desc *ptcb_desc); void (*flush)(struct ieee80211_hw *hw, bool drop); int (*reset_trx_ring) (struct ieee80211_hw *hw); - bool (*waitq_insert) (struct ieee80211_hw *hw, struct sk_buff *skb); + bool (*waitq_insert) (struct ieee80211_hw *hw, + struct ieee80211_sta *sta, + struct sk_buff *skb); /*pci */ void (*disable_aspm) (struct ieee80211_hw *hw); diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index 3118c42..441cbcc 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -354,7 +354,9 @@ out: return ret; } -static void wl1251_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void wl1251_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct wl1251 *wl = hw->priv; unsigned long flags; diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 5efd591..ff830cf 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1181,7 +1181,9 @@ out: return ret; } -static void wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void wl1271_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct wl1271 *wl = hw->priv; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -1197,7 +1199,7 @@ static void wl1271_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) mapping = skb_get_queue_mapping(skb); q = wl1271_tx_get_queue(mapping); - hlid = wl12xx_tx_get_hlid(wl, wlvif, skb, info->control.sta); + hlid = wl12xx_tx_get_hlid(wl, wlvif, skb, control->sta); spin_lock_irqsave(&wl->wl_lock, flags); diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index c9e2660..4598801 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -937,7 +937,9 @@ static int fill_ctrlset(struct zd_mac *mac, * control block of the skbuff will be initialized. If necessary the incoming * mac80211 queues will be stopped. */ -static void zd_op_tx(struct ieee80211_hw *hw, struct sk_buff *skb) +static void zd_op_tx(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct zd_mac *mac = zd_hw_mac(hw); struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); @@ -1176,7 +1178,7 @@ static void zd_beacon_done(struct zd_mac *mac) skb = ieee80211_get_buffered_bc(mac->hw, mac->vif); if (!skb) break; - zd_op_tx(mac->hw, skb); + zd_op_tx(mac->hw, NULL, skb); } /* diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c index ef36054..b76d95e 100644 --- a/drivers/staging/winbond/wbusb.c +++ b/drivers/staging/winbond/wbusb.c @@ -119,7 +119,9 @@ static void wbsoft_configure_filter(struct ieee80211_hw *dev, *total_flags = new_flags; } -static void wbsoft_tx(struct ieee80211_hw *dev, struct sk_buff *skb) +static void wbsoft_tx(struct ieee80211_hw *dev, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { struct wbsoft_priv *priv = dev->priv; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d67d3bb..8114f59 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -527,9 +527,6 @@ struct ieee80211_tx_rate { * (2) driver internal use (if applicable) * (3) TX status information - driver tells mac80211 what happened * - * The TX control's sta pointer is only valid during the ->tx call, - * it may be NULL. - * * @flags: transmit info flags, defined above * @band: the band to transmit on (use for checking for races) * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC @@ -560,6 +557,7 @@ struct ieee80211_tx_info { struct ieee80211_tx_rate rates[ IEEE80211_TX_MAX_RATES]; s8 rts_cts_rate_idx; + /* 3 bytes free */ }; /* only needed before rate control */ unsigned long jiffies; @@ -567,7 +565,7 @@ struct ieee80211_tx_info { /* NB: vif can be NULL for injected frames */ struct ieee80211_vif *vif; struct ieee80211_key_conf *hw_key; - struct ieee80211_sta *sta; + /* 8 bytes free */ } control; struct { struct ieee80211_tx_rate rates[IEEE80211_TX_MAX_RATES]; @@ -1079,6 +1077,16 @@ enum sta_notify_cmd { }; /** + * struct ieee80211_tx_control - TX control data + * + * @sta: station table entry, this sta pointer may be NULL and + * it is not allowed to copy the pointer, due to RCU. + */ +struct ieee80211_tx_control { + struct ieee80211_sta *sta; +}; + +/** * enum ieee80211_hw_flags - hardware flags * * These flags are used to indicate hardware capabilities to @@ -2269,7 +2277,9 @@ enum ieee80211_rate_control_changed { * The callback is optional and can (should!) sleep. */ struct ieee80211_ops { - void (*tx)(struct ieee80211_hw *hw, struct sk_buff *skb); + void (*tx)(struct ieee80211_hw *hw, + struct ieee80211_tx_control *control, + struct sk_buff *skb); int (*start)(struct ieee80211_hw *hw); void (*stop)(struct ieee80211_hw *hw); #ifdef CONFIG_PM diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index df92031..a81117a 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -22,9 +22,11 @@ get_bss_sdata(struct ieee80211_sub_if_data *sdata) return sdata; } -static inline void drv_tx(struct ieee80211_local *local, struct sk_buff *skb) +static inline void drv_tx(struct ieee80211_local *local, + struct ieee80211_tx_control *control, + struct sk_buff *skb) { - local->ops->tx(&local->hw, skb); + local->ops->tx(&local->hw, control, skb); } static inline void drv_get_et_strings(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index acf712f..7558ba5 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1204,6 +1204,7 @@ static bool ieee80211_tx_frags(struct ieee80211_local *local, struct sk_buff_head *skbs, bool txpending) { + struct ieee80211_tx_control control; struct sk_buff *skb, *tmp; unsigned long flags; @@ -1240,10 +1241,10 @@ static bool ieee80211_tx_frags(struct ieee80211_local *local, spin_unlock_irqrestore(&local->queue_stop_reason_lock, flags); info->control.vif = vif; - info->control.sta = sta; + control.sta = sta; __skb_unlink(skb, skbs); - drv_tx(local, skb); + drv_tx(local, &control, skb); } return true; -- cgit v0.10.2 From 1b49de26566e7175e8f2d0934db6d9119f553b56 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 27 Jul 2012 10:29:14 +0200 Subject: mac80211: supress HT/VHT disable if not supported If HT/VHT isn't supported by us we shouldn't print a message that we disabled it, do that only if the AP didn't support WMM and we therefore disable it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ea46c64..c846547 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3373,16 +3373,18 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, if (!sband->ht_cap.ht_supported || local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used) { ifmgd->flags |= IEEE80211_STA_DISABLE_11N; - netdev_info(sdata->dev, - "disabling HT as WMM/QoS is not supported\n"); + if (!bss->wmm_used) + netdev_info(sdata->dev, + "disabling HT as WMM/QoS is not supported by the AP\n"); } /* disable VHT if we don't support it or the AP doesn't use WMM */ if (!sband->vht_cap.vht_supported || local->hw.queues < IEEE80211_NUM_ACS || !bss->wmm_used) { ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; - netdev_info(sdata->dev, - "disabling VHT as WMM/QoS is not supported\n"); + if (!bss->wmm_used) + netdev_info(sdata->dev, + "disabling VHT as WMM/QoS is not supported by the AP\n"); } memcpy(&ifmgd->ht_capa, &req->ht_capa, sizeof(ifmgd->ht_capa)); -- cgit v0.10.2 From 13e0c8e355983cdd4ea7accc3b3208e80944716d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 27 Jul 2012 10:43:16 +0200 Subject: mac80211: rename sta to new_sta In ieee80211_prep_connection(), the station (if not NULL) is the new station (representing the AP) that needs to be added. Rename the variable to "new_sta" to clarify this. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c846547..e065ef5 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3044,7 +3044,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss *bss = (void *)cbss->priv; - struct sta_info *sta = NULL; + struct sta_info *new_sta = NULL; bool have_sta = false; int err; int ht_cfreq; @@ -3063,8 +3063,8 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, } if (!have_sta) { - sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); - if (!sta) + new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); + if (!new_sta) return -ENOMEM; } @@ -3135,7 +3135,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, local->oper_channel = cbss->channel; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); - if (sta) { + if (new_sta) { u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; int min_rate = INT_MAX, min_rate_index = -1; @@ -3160,7 +3160,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, basic_rates = BIT(min_rate_index); } - sta->sta.supp_rates[cbss->channel->band] = rates; + new_sta->sta.supp_rates[cbss->channel->band] = rates; sdata->vif.bss_conf.basic_rates = basic_rates; /* cf. IEEE 802.11 9.2.12 */ @@ -3183,10 +3183,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, BSS_CHANGED_BEACON_INT); if (assoc) - sta_info_pre_move_state(sta, IEEE80211_STA_AUTH); + sta_info_pre_move_state(new_sta, IEEE80211_STA_AUTH); - err = sta_info_insert(sta); - sta = NULL; + err = sta_info_insert(new_sta); + new_sta = NULL; if (err) { sdata_info(sdata, "failed to insert STA entry for the AP (error %d)\n", -- cgit v0.10.2 From b17166a707e748ad87907f38431a1df26bb643f2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 27 Jul 2012 11:41:27 +0200 Subject: mac80211: set channel only once during auth/assoc There's no need to set up the channel during auth and again during assoc, just do it once. Currently this doesn't result in any changes since calling hw_config() with an unchanged channel will return early, but with the channel context work this has an impact on channel context assignment. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e065ef5..6820552 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3038,41 +3038,17 @@ int ieee80211_max_network_latency(struct notifier_block *nb, return 0; } -static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, - struct cfg80211_bss *cbss, bool assoc) +static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, + struct cfg80211_bss *cbss) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - struct ieee80211_bss *bss = (void *)cbss->priv; - struct sta_info *new_sta = NULL; - bool have_sta = false; - int err; int ht_cfreq; enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT; const u8 *ht_oper_ie; const struct ieee80211_ht_operation *ht_oper = NULL; struct ieee80211_supported_band *sband; - if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) - return -EINVAL; - - if (assoc) { - rcu_read_lock(); - have_sta = sta_info_get(sdata, cbss->bssid); - rcu_read_unlock(); - } - - if (!have_sta) { - new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); - if (!new_sta) - return -ENOMEM; - } - - mutex_lock(&local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&local->mtx); - - /* switch to the right channel */ sband = local->hw.wiphy->bands[cbss->channel->band]; ifmgd->flags &= ~IEEE80211_STA_DISABLE_40MHZ; @@ -3135,10 +3111,51 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, local->oper_channel = cbss->channel; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + return 0; +} + +static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, + struct cfg80211_bss *cbss, bool assoc) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; + struct ieee80211_bss *bss = (void *)cbss->priv; + struct sta_info *new_sta = NULL; + bool have_sta = false; + int err; + + if (WARN_ON(!ifmgd->auth_data && !ifmgd->assoc_data)) + return -EINVAL; + + if (assoc) { + rcu_read_lock(); + have_sta = sta_info_get(sdata, cbss->bssid); + rcu_read_unlock(); + } + + if (!have_sta) { + new_sta = sta_info_alloc(sdata, cbss->bssid, GFP_KERNEL); + if (!new_sta) + return -ENOMEM; + } + + mutex_lock(&local->mtx); + ieee80211_recalc_idle(sdata->local); + mutex_unlock(&local->mtx); + if (new_sta) { u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; int min_rate = INT_MAX, min_rate_index = -1; + struct ieee80211_supported_band *sband; + + sband = local->hw.wiphy->bands[cbss->channel->band]; + + err = ieee80211_prep_channel(sdata, cbss); + if (err) { + sta_info_free(local, new_sta); + return err; + } ieee80211_get_rates(sband, bss->supp_rates, bss->supp_rates_len, -- cgit v0.10.2 From 6962d602056c88ce470f991a265a33132fb95232 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:29:21 +0200 Subject: mac80211: use oper_channel in mesh Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 6fac18c..03f1696 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -349,17 +349,18 @@ int mesh_add_ds_params_ie(struct sk_buff *skb, { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan = local->oper_channel; u8 *pos; if (skb_tailroom(skb) < 3) return -ENOMEM; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[chan->band]; if (sband->band == IEEE80211_BAND_2GHZ) { pos = skb_put(skb, 2 + 1); *pos++ = WLAN_EID_DS_PARAMS; *pos++ = 1; - *pos++ = ieee80211_frequency_to_channel(local->hw.conf.channel->center_freq); + *pos++ = ieee80211_frequency_to_channel(chan->center_freq); } return 0; @@ -603,7 +604,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.beacon_int = MESH_DEFAULT_BEACON_INTERVAL; sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(sdata->local, - sdata->local->hw.conf.channel->band); + sdata->local->oper_channel->band); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED | BSS_CHANGED_HT | -- cgit v0.10.2 From 273686d664daae1aa728b76e45720273b26dd876 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:29:21 +0200 Subject: mac80211: use oper_channel in ibss Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 5746d62..d062085 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -205,7 +205,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, mod_timer(&ifibss->timer, round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL)); - bss = cfg80211_inform_bss_frame(local->hw.wiphy, local->hw.conf.channel, + bss = cfg80211_inform_bss_frame(local->hw.wiphy, chan, mgmt, skb->len, 0, GFP_KERNEL); cfg80211_put_bss(bss); netif_carrier_on(sdata->dev); @@ -294,7 +294,7 @@ ieee80211_ibss_add_sta(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; struct sta_info *sta; - int band = local->hw.conf.channel->band; + int band = local->oper_channel->band; /* * XXX: Consider removing the least recently used entry and @@ -561,7 +561,7 @@ void ieee80211_ibss_rx_no_sta(struct ieee80211_sub_if_data *sdata, struct ieee80211_if_ibss *ifibss = &sdata->u.ibss; struct ieee80211_local *local = sdata->local; struct sta_info *sta; - int band = local->hw.conf.channel->band; + int band = local->oper_channel->band; /* * XXX: Consider removing the least recently used entry and @@ -759,7 +759,7 @@ static void ieee80211_sta_find_ibss(struct ieee80211_sub_if_data *sdata) return; } sdata_info(sdata, "IBSS not allowed on %d MHz\n", - local->hw.conf.channel->center_freq); + local->oper_channel->center_freq); /* No IBSS found - decrease scan interval and continue * scanning. */ -- cgit v0.10.2 From 568d6e289736c9c78cd8723aa81415daffafeff9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:29:21 +0200 Subject: mac80211: use oper_channel in managed mlme Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 6820552..2657a56 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -185,15 +185,15 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, u16 ht_opmode; bool disable_40 = false; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[local->oper_channel->band]; switch (sdata->vif.bss_conf.channel_type) { case NL80211_CHAN_HT40PLUS: - if (local->hw.conf.channel->flags & IEEE80211_CHAN_NO_HT40PLUS) + if (local->oper_channel->flags & IEEE80211_CHAN_NO_HT40PLUS) disable_40 = true; break; case NL80211_CHAN_HT40MINUS: - if (local->hw.conf.channel->flags & IEEE80211_CHAN_NO_HT40MINUS) + if (local->oper_channel->flags & IEEE80211_CHAN_NO_HT40MINUS) disable_40 = true; break; default: @@ -1274,7 +1274,7 @@ static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, } use_short_slot = !!(capab & WLAN_CAPABILITY_SHORT_SLOT_TIME); - if (sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) + if (sdata->local->oper_channel->band == IEEE80211_BAND_5GHZ) use_short_slot = true; if (use_protection != bss_conf->use_cts_prot) { @@ -2364,7 +2364,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (baselen > len) return; - if (rx_status->freq != local->hw.conf.channel->center_freq) + if (rx_status->freq != local->oper_channel->center_freq) return; if (ifmgd->assoc_data && !ifmgd->assoc_data->have_beacon && @@ -2528,7 +2528,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, !(ifmgd->flags & IEEE80211_STA_DISABLE_11N)) { struct ieee80211_supported_band *sband; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[local->oper_channel->band]; changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, bssid, true); -- cgit v0.10.2 From 679ef4eadde1f8e55074427c0d8de2da55ca81f9 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:29:21 +0200 Subject: mac80211: use oper_channel in utils and config Using hw.conf.channel is wrong as it could be the temporary channel if any function like the beacon get function is called while scanning or during other temporary out-of-channel activities. Use oper_channel instead. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 06b8d39..1b8d191 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -330,7 +330,7 @@ static void rate_idx_to_bitrate(struct rate_info *rate, struct sta_info *sta, in if (!(rate->flags & RATE_INFO_FLAGS_MCS)) { struct ieee80211_supported_band *sband; sband = sta->local->hw.wiphy->bands[ - sta->local->hw.conf.channel->band]; + sta->local->oper_channel->band]; rate->legacy = sband->bitrates[idx].bitrate; } else rate->mcs = idx; @@ -1662,7 +1662,7 @@ static int ieee80211_change_bss(struct wiphy *wiphy, } if (!sdata->vif.bss_conf.use_short_slot && - sdata->local->hw.conf.channel->band == IEEE80211_BAND_5GHZ) { + sdata->local->oper_channel->band == IEEE80211_BAND_5GHZ) { sdata->vif.bss_conf.use_short_slot = true; changed |= BSS_CHANGED_ERP_SLOT; } @@ -1928,7 +1928,7 @@ static int ieee80211_set_tx_power(struct wiphy *wiphy, enum nl80211_tx_power_setting type, int mbm) { struct ieee80211_local *local = wiphy_priv(wiphy); - struct ieee80211_channel *chan = local->hw.conf.channel; + struct ieee80211_channel *chan = local->oper_channel; u32 changes = 0; switch (type) { diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index bfb57dc..fc8ba83 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1274,7 +1274,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, /* reset some values that shouldn't be kept across type changes */ sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(sdata->local, - sdata->local->hw.conf.channel->band); + sdata->local->oper_channel->band); sdata->drop_unencrypted = 0; if (type == NL80211_IFTYPE_STATION) sdata->u.mgd.use_4addr = false; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 037d148..39005ec 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -832,7 +832,7 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, memset(&qparam, 0, sizeof(qparam)); - use_11b = (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ) && + use_11b = (local->oper_channel->band == IEEE80211_BAND_2GHZ) && !(sdata->flags & IEEE80211_SDATA_OPERATING_GMODE); /* @@ -919,7 +919,7 @@ void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata, if ((supp_rates[i] & 0x7f) * 5 > 110) have_higher_than_11mbit = 1; - if (local->hw.conf.channel->band == IEEE80211_BAND_2GHZ && + if (local->oper_channel->band == IEEE80211_BAND_2GHZ && have_higher_than_11mbit) sdata->flags |= IEEE80211_SDATA_OPERATING_GMODE; else -- cgit v0.10.2 From 6b77863b719a4e32909c218c0d5a83a14f4d98c5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:53:27 +0200 Subject: mac80211: fix current vs. operating channel in preq/beacon When sending probe requests, e.g. during software scanning, these will go out on the *current* channel, so their IEs need to be built from the current channel. At other times, e.g. for beacons or probe request templates, the IEs will be used on the *operating* channel and using the current channel instead might result in errors. Add the appropriate parameters to respect the difference. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 1b8d191..5583f5b 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2655,6 +2655,7 @@ ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev, u16 status_code, struct sk_buff *skb) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; struct ieee80211_tdls_data *tf; tf = (void *)skb_put(skb, offsetof(struct ieee80211_tdls_data, u)); @@ -2674,8 +2675,10 @@ ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev, tf->u.setup_req.capability = cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata)); - ieee80211_add_srates_ie(sdata, skb, false); - ieee80211_add_ext_srates_ie(sdata, skb, false); + ieee80211_add_srates_ie(sdata, skb, false, + local->oper_channel->band); + ieee80211_add_ext_srates_ie(sdata, skb, false, + local->oper_channel->band); ieee80211_tdls_add_ext_capab(skb); break; case WLAN_TDLS_SETUP_RESPONSE: @@ -2688,8 +2691,10 @@ ieee80211_prep_tdls_encap_data(struct wiphy *wiphy, struct net_device *dev, tf->u.setup_resp.capability = cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata)); - ieee80211_add_srates_ie(sdata, skb, false); - ieee80211_add_ext_srates_ie(sdata, skb, false); + ieee80211_add_srates_ie(sdata, skb, false, + local->oper_channel->band); + ieee80211_add_ext_srates_ie(sdata, skb, false, + local->oper_channel->band); ieee80211_tdls_add_ext_capab(skb); break; case WLAN_TDLS_SETUP_CONFIRM: @@ -2727,6 +2732,7 @@ ieee80211_prep_tdls_direct(struct wiphy *wiphy, struct net_device *dev, u16 status_code, struct sk_buff *skb) { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; struct ieee80211_mgmt *mgmt; mgmt = (void *)skb_put(skb, 24); @@ -2749,8 +2755,10 @@ ieee80211_prep_tdls_direct(struct wiphy *wiphy, struct net_device *dev, mgmt->u.action.u.tdls_discover_resp.capability = cpu_to_le16(ieee80211_get_tdls_sta_capab(sdata)); - ieee80211_add_srates_ie(sdata, skb, false); - ieee80211_add_ext_srates_ie(sdata, skb, false); + ieee80211_add_srates_ie(sdata, skb, false, + local->oper_channel->band); + ieee80211_add_ext_srates_ie(sdata, skb, false, + local->oper_channel->band); ieee80211_tdls_add_ext_capab(skb); break; default: diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8e65ad9..0aaad02 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1459,6 +1459,7 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer, u8 channel); struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, u32 ratemask, + struct ieee80211_channel *chan, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, bool directed); @@ -1489,9 +1490,11 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap, u8 *ieee80211_ie_build_vht_cap(u8 *pos, struct ieee80211_sta_vht_cap *vht_cap, u32 cap); int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, bool need_basic); + struct sk_buff *skb, bool need_basic, + enum ieee80211_band band); int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, bool need_basic); + struct sk_buff *skb, bool need_basic, + enum ieee80211_band band); /* channel management */ enum ieee80211_chan_mode { diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index fa642c7..985b37f 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -258,8 +258,10 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, pos = skb_put(skb, 2); memcpy(pos + 2, &plid, 2); } - if (ieee80211_add_srates_ie(sdata, skb, true) || - ieee80211_add_ext_srates_ie(sdata, skb, true) || + if (ieee80211_add_srates_ie(sdata, skb, true, + local->oper_channel->band) || + ieee80211_add_ext_srates_ie(sdata, skb, true, + local->oper_channel->band) || mesh_add_rsn_ie(skb, sdata) || mesh_add_meshid_ie(skb, sdata) || mesh_add_meshconf_ie(skb, sdata)) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 2657a56..c416a08 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1683,7 +1683,9 @@ struct sk_buff *ieee80211_ap_probereq_get(struct ieee80211_hw *hw, ssid_len = ssid[1]; skb = ieee80211_build_probe_req(sdata, cbss->bssid, - (u32) -1, ssid + 2, ssid_len, + (u32) -1, + sdata->local->oper_channel, + ssid + 2, ssid_len, NULL, 0, true); return skb; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7558ba5..b559c6b 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2303,7 +2303,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_if_ap *ap = NULL; struct beacon_data *beacon; struct ieee80211_supported_band *sband; - enum ieee80211_band band = local->hw.conf.channel->band; + enum ieee80211_band band = local->oper_channel->band; struct ieee80211_tx_rate_control txrc; sband = local->hw.wiphy->bands[band]; @@ -2429,9 +2429,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, *pos++ = WLAN_EID_SSID; *pos++ = 0x0; - if (ieee80211_add_srates_ie(sdata, skb, true) || + if (ieee80211_add_srates_ie(sdata, skb, true, band) || mesh_add_ds_params_ie(skb, sdata) || - ieee80211_add_ext_srates_ie(sdata, skb, true) || + ieee80211_add_ext_srates_ie(sdata, skb, true, band) || mesh_add_rsn_ie(skb, sdata) || mesh_add_ht_cap_ie(skb, sdata) || mesh_add_ht_oper_ie(skb, sdata) || diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 39005ec..99e4258 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1100,6 +1100,7 @@ int ieee80211_build_preq_ies(struct ieee80211_local *local, u8 *buffer, struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, u32 ratemask, + struct ieee80211_channel *chan, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, bool directed) @@ -1109,7 +1110,7 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; size_t buf_len; u8 *buf; - u8 chan; + u8 chan_no; /* FIXME: come up with a proper value */ buf = kmalloc(200 + ie_len, GFP_KERNEL); @@ -1122,14 +1123,12 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, * badly-behaved APs don't respond when this parameter is included. */ if (directed) - chan = 0; + chan_no = 0; else - chan = ieee80211_frequency_to_channel( - local->hw.conf.channel->center_freq); + chan_no = ieee80211_frequency_to_channel(chan->center_freq); - buf_len = ieee80211_build_preq_ies(local, buf, ie, ie_len, - local->hw.conf.channel->band, - ratemask, chan); + buf_len = ieee80211_build_preq_ies(local, buf, ie, ie_len, chan->band, + ratemask, chan_no); skb = ieee80211_probereq_get(&local->hw, &sdata->vif, ssid, ssid_len, @@ -1158,7 +1157,9 @@ void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, { struct sk_buff *skb; - skb = ieee80211_build_probe_req(sdata, dst, ratemask, ssid, ssid_len, + skb = ieee80211_build_probe_req(sdata, dst, ratemask, + sdata->local->hw.conf.channel, + ssid, ssid_len, ie, ie_len, directed); if (skb) { if (no_cck) @@ -1810,7 +1811,8 @@ ieee80211_ht_oper_to_channel_type(struct ieee80211_ht_operation *ht_oper) } int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, bool need_basic) + struct sk_buff *skb, bool need_basic, + enum ieee80211_band band) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -1818,7 +1820,7 @@ int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata, u8 i, rates, *pos; u32 basic_rates = sdata->vif.bss_conf.basic_rates; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[band]; rates = sband->n_bitrates; if (rates > 8) rates = 8; @@ -1841,7 +1843,8 @@ int ieee80211_add_srates_ie(struct ieee80211_sub_if_data *sdata, } int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, - struct sk_buff *skb, bool need_basic) + struct sk_buff *skb, bool need_basic, + enum ieee80211_band band) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -1849,7 +1852,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, u8 i, exrates, *pos; u32 basic_rates = sdata->vif.bss_conf.basic_rates; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[band]; exrates = sband->n_bitrates; if (exrates > 8) exrates -= 8; -- cgit v0.10.2 From 2d56577bc68e56097a1cd6599b678e8cab758e64 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 15:12:51 +0200 Subject: mac80211: use correct channel in TX Since we only need the band, remove the channel pointer from struct ieee80211_tx_data and also assign it properly, depending on context, to the correct operating or current channel. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 0aaad02..d1a7c58 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -193,8 +193,6 @@ struct ieee80211_tx_data { struct sta_info *sta; struct ieee80211_key *key; - struct ieee80211_channel *channel; - unsigned int flags; }; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index b559c6b..5b81660 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -55,7 +55,7 @@ static __le16 ieee80211_duration(struct ieee80211_tx_data *tx, if (WARN_ON_ONCE(info->control.rates[0].idx < 0)) return 0; - sband = local->hw.wiphy->bands[tx->channel->band]; + sband = local->hw.wiphy->bands[info->band]; txrate = &sband->bitrates[info->control.rates[0].idx]; erp = txrate->flags & IEEE80211_RATE_ERP_G; @@ -615,7 +615,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) memset(&txrc, 0, sizeof(txrc)); - sband = tx->local->hw.wiphy->bands[tx->channel->band]; + sband = tx->local->hw.wiphy->bands[info->band]; len = min_t(u32, tx->skb->len + FCS_LEN, tx->local->hw.wiphy->frag_threshold); @@ -626,13 +626,13 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) txrc.bss_conf = &tx->sdata->vif.bss_conf; txrc.skb = tx->skb; txrc.reported_rate.idx = -1; - txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[tx->channel->band]; + txrc.rate_idx_mask = tx->sdata->rc_rateidx_mask[info->band]; if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1) txrc.max_rate_idx = -1; else txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; memcpy(txrc.rate_idx_mcs_mask, - tx->sdata->rc_rateidx_mcs_mask[tx->channel->band], + tx->sdata->rc_rateidx_mcs_mask[info->band], sizeof(txrc.rate_idx_mcs_mask)); txrc.bss = (tx->sdata->vif.type == NL80211_IFTYPE_AP || tx->sdata->vif.type == NL80211_IFTYPE_MESH_POINT || @@ -667,7 +667,7 @@ ieee80211_tx_h_rate_ctrl(struct ieee80211_tx_data *tx) "scanning and associated. Target station: " "%pM on %d GHz band\n", tx->sdata->name, hdr->addr1, - tx->channel->band ? 5 : 2)) + info->band ? 5 : 2)) return TX_DROP; /* @@ -1131,7 +1131,6 @@ ieee80211_tx_prepare(struct ieee80211_sub_if_data *sdata, tx->skb = skb; tx->local = local; tx->sdata = sdata; - tx->channel = local->hw.conf.channel; __skb_queue_head_init(&tx->skbs); /* @@ -1400,8 +1399,7 @@ static bool ieee80211_tx(struct ieee80211_sub_if_data *sdata, goto out; } - tx.channel = local->hw.conf.channel; - info->band = tx.channel->band; + info->band = local->hw.conf.channel->band; /* set up hw_queue value early */ if (!(info->flags & IEEE80211_TX_CTL_TX_OFFCHAN) || @@ -2710,8 +2708,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, info = IEEE80211_SKB_CB(skb); tx.flags |= IEEE80211_TX_PS_BUFFERED; - tx.channel = local->hw.conf.channel; - info->band = tx.channel->band; + info->band = local->oper_channel->band; if (invoke_tx_handlers(&tx)) skb = NULL; -- cgit v0.10.2 From c405c6298eacd423098afacf6020ddbda1b0378b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Jul 2012 19:44:12 +0200 Subject: mac80211: manage carrier state in mesh Instead of assuming the carrier is on all the time in mesh manage it with joining and leaving the mesh. Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index fc8ba83..c65a03b 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -539,12 +539,16 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) changed |= ieee80211_reset_erp_info(sdata); ieee80211_bss_info_change_notify(sdata, changed); - if (sdata->vif.type == NL80211_IFTYPE_STATION || - sdata->vif.type == NL80211_IFTYPE_ADHOC || - sdata->vif.type == NL80211_IFTYPE_AP) + switch (sdata->vif.type) { + case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_AP: + case NL80211_IFTYPE_MESH_POINT: netif_carrier_off(dev); - else + break; + default: netif_carrier_on(dev); + } /* * set default queue parameters so drivers don't diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 03f1696..571d518 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -610,6 +610,8 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) BSS_CHANGED_HT | BSS_CHANGED_BASIC_RATES | BSS_CHANGED_BEACON_INT); + + netif_carrier_on(sdata->dev); } void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) @@ -617,6 +619,8 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + netif_carrier_off(sdata->dev); + ifmsh->mesh_id_len = 0; ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); sta_info_flush(local, NULL); -- cgit v0.10.2 From 1411af156524ce42c2a7f989320c4484257f3ff5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Jul 2012 19:48:09 +0200 Subject: mac80211: enable WDS carrier only after adding station Enable the carrier on WDS type interfaces only after having added the station entry for the WDS peer so outgoing frames will find it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index c65a03b..2d6ac78 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -546,6 +546,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) case NL80211_IFTYPE_MESH_POINT: netif_carrier_off(dev); break; + case NL80211_IFTYPE_WDS: + break; default: netif_carrier_on(dev); } @@ -580,6 +582,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) } rate_control_rate_init(sta); + netif_carrier_on(dev); } /* -- cgit v0.10.2 From e83e6541cee0a12bc445b0f4fad5214df5803087 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 13 Jul 2012 16:23:07 +0200 Subject: mac80211: use eth_broadcast_addr Instead of memset(). Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 5583f5b..df64b45 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -950,7 +950,7 @@ static void ieee80211_send_layer2_update(struct sta_info *sta) /* 802.2 Type 1 Logical Link Control (LLC) Exchange Identifier (XID) * Update response frame; IEEE Std 802.2-1998, 5.4.1.2.1 */ - memset(msg->da, 0xff, ETH_ALEN); + eth_broadcast_addr(msg->da); memcpy(msg->sa, sta->sta.addr, ETH_ALEN); msg->len = htons(6); msg->dsap = 0; diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index d062085..1ebda2f 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -109,7 +109,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, memset(mgmt, 0, 24 + sizeof(mgmt->u.beacon)); mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_RESP); - memset(mgmt->da, 0xff, ETH_ALEN); + eth_broadcast_addr(mgmt->da); memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); memcpy(mgmt->bssid, ifibss->bssid, ETH_ALEN); mgmt->u.beacon.beacon_int = cpu_to_le16(beacon_int); diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index 075bc53..bec7b28 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -531,7 +531,7 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata) read_lock_bh(&pathtbl_resize_lock); memcpy(new_mpath->dst, dst, ETH_ALEN); - memset(new_mpath->rann_snd_addr, 0xff, ETH_ALEN); + eth_broadcast_addr(new_mpath->rann_snd_addr); new_mpath->is_root = false; new_mpath->sdata = sdata; new_mpath->flags = 0; diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 5b81660..7dbcf29 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2415,7 +2415,7 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, memset(mgmt, 0, hdr_len); mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); - memset(mgmt->da, 0xff, ETH_ALEN); + eth_broadcast_addr(mgmt->da); memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); mgmt->u.beacon.beacon_int = @@ -2609,9 +2609,9 @@ struct sk_buff *ieee80211_probereq_get(struct ieee80211_hw *hw, memset(hdr, 0, sizeof(*hdr)); hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_PROBE_REQ); - memset(hdr->addr1, 0xff, ETH_ALEN); + eth_broadcast_addr(hdr->addr1); memcpy(hdr->addr2, vif->addr, ETH_ALEN); - memset(hdr->addr3, 0xff, ETH_ALEN); + eth_broadcast_addr(hdr->addr3); pos = skb_put(skb, ie_ssid_len); *pos++ = WLAN_EID_SSID; -- cgit v0.10.2 From 19c3b8303d4686aa373c669ee833609b3fb403cc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 20:13:36 +0200 Subject: mac80211: reset station MLME flags upon new association When associating anew, the old station MLME flags should be cleared. The only exception is the 40 MHz disable flag as it might have been set while the channel was set in a previous authentication attempt so it needs to be kept intact. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c416a08..9d60b49 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3357,10 +3357,13 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, } /* prepare assoc data */ - - ifmgd->flags &= ~IEEE80211_STA_DISABLE_11N; - ifmgd->flags &= ~IEEE80211_STA_NULLFUNC_ACKED; - ifmgd->flags &= ~IEEE80211_STA_DISABLE_VHT; + + /* + * keep only the 40 MHz disable bit set as it might have + * been set during authentication already, all other bits + * should be reset for a new connection + */ + ifmgd->flags &= IEEE80211_STA_DISABLE_40MHZ; ifmgd->beacon_crc_valid = false; -- cgit v0.10.2 From 0d466b9c6798d431141ab15ae6d5ea413b4d09b2 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Fri, 3 Aug 2012 12:21:32 -0700 Subject: mac80211: improve cleanup when leaving mesh It is not necessary to stop the mesh beacon in the mac80211 ndo_stop handler, since cfg80211 has already left the mesh on NETDEV_GOING_DOWN notification. Also some improvements to ieee80211_stop_mesh(): - flush mpath entries. - flush sta entries per-sdata so we don't remove entries belonging to other vifs on the same hw. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 2d6ac78..5a81577 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -778,14 +778,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, skb_queue_purge(&sdata->skb_queue); /* - * Disable beaconing here for mesh only, AP and IBSS - * are already taken care of. - */ - if (sdata->vif.type == NL80211_IFTYPE_MESH_POINT) - ieee80211_bss_info_change_notify(sdata, - BSS_CHANGED_BEACON_ENABLED); - - /* * Free all remaining keys, there shouldn't be any, * except maybe group keys in AP more or WDS? */ diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 571d518..035cd0c 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -621,9 +621,13 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) netif_carrier_off(sdata->dev); + /* stop the beacon */ ifmsh->mesh_id_len = 0; ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); - sta_info_flush(local, NULL); + + /* flush STAs and mpaths on this iface */ + sta_info_flush(sdata->local, sdata); + mesh_path_flush_by_iface(sdata); del_timer_sync(&sdata->u.mesh.housekeeping_timer); del_timer_sync(&sdata->u.mesh.mesh_path_root_timer); -- cgit v0.10.2 From 3e17f2be31f354fe03e1732bc527a31ff3dd3bb9 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Fri, 3 Aug 2012 12:21:33 -0700 Subject: mac80211: remove ieee80211_clean_sdata() This function was only used by mesh, and not really needed since any interface-specific cleanup already happens in the netdev handlers. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 5a81577..abee3a0 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1155,18 +1155,6 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, ieee80211_debugfs_add_netdev(sdata); } -static void ieee80211_clean_sdata(struct ieee80211_sub_if_data *sdata) -{ - switch (sdata->vif.type) { - case NL80211_IFTYPE_MESH_POINT: - mesh_path_flush_by_iface(sdata); - break; - - default: - break; - } -} - static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, enum nl80211_iftype type) { @@ -1502,9 +1490,6 @@ void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata) list_del_rcu(&sdata->list); mutex_unlock(&sdata->local->iflist_mtx); - /* clean up type-dependent data */ - ieee80211_clean_sdata(sdata); - synchronize_rcu(); unregister_netdevice(sdata->dev); } @@ -1524,8 +1509,6 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { list_del(&sdata->list); - ieee80211_clean_sdata(sdata); - unregister_netdevice_queue(sdata->dev, &unreg_list); } mutex_unlock(&local->iflist_mtx); -- cgit v0.10.2 From e7570dfb635b0c89570852002c9f85dd1cf82ba1 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Fri, 3 Aug 2012 12:21:34 -0700 Subject: mac80211: don't request ack for peering close It doesn't make a lot of sense to wait for an ack in response to a peering close frame since either peer in this exchange could be going down. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 985b37f..bad5126 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -217,6 +217,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, u8 *da, __le16 llid, __le16 plid, __le16 reason) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; + struct ieee80211_tx_info *info; struct ieee80211_mgmt *mgmt; bool include_plid = false; u16 peering_proto = 0; @@ -238,6 +239,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, sdata->u.mesh.ie_len); if (!skb) return -1; + info = IEEE80211_SKB_CB(skb); skb_reserve(skb, local->tx_headroom); mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); memset(mgmt, 0, hdr_len); @@ -267,6 +269,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, mesh_add_meshconf_ie(skb, sdata)) return -1; } else { /* WLAN_SP_MESH_PEERING_CLOSE */ + info->flags |= IEEE80211_TX_CTL_NO_ACK; if (mesh_add_meshid_ie(skb, sdata)) return -1; } -- cgit v0.10.2 From f609a43dca2964a8a604ef554be92fa11c3b4c41 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Fri, 3 Aug 2012 12:21:35 -0700 Subject: mac80211: skb leak in mesh_plink_frame_tx() Although adding an IE is almost guaranteed to succeed since we already accounted for its length while allocating the skb, we should still free the skb in case of failure. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index bad5126..5fd1250 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -224,6 +224,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, u8 *pos, ie_len = 4; int hdr_len = offsetof(struct ieee80211_mgmt, u.action.u.self_prot) + sizeof(mgmt->u.action.u.self_prot); + int err = -ENOMEM; skb = dev_alloc_skb(local->tx_headroom + hdr_len + @@ -267,11 +268,11 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, mesh_add_rsn_ie(skb, sdata) || mesh_add_meshid_ie(skb, sdata) || mesh_add_meshconf_ie(skb, sdata)) - return -1; + goto free; } else { /* WLAN_SP_MESH_PEERING_CLOSE */ info->flags |= IEEE80211_TX_CTL_NO_ACK; if (mesh_add_meshid_ie(skb, sdata)) - return -1; + goto free; } /* Add Mesh Peering Management element */ @@ -290,11 +291,12 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, ie_len += 2; /* reason code */ break; default: - return -EINVAL; + err = -EINVAL; + goto free; } if (WARN_ON(skb_tailroom(skb) < 2 + ie_len)) - return -ENOMEM; + goto free; pos = skb_put(skb, 2 + ie_len); *pos++ = WLAN_EID_PEER_MGMT; @@ -315,14 +317,17 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, if (action != WLAN_SP_MESH_PEERING_CLOSE) { if (mesh_add_ht_cap_ie(skb, sdata) || mesh_add_ht_oper_ie(skb, sdata)) - return -1; + goto free; } if (mesh_add_vendor_ies(skb, sdata)) - return -1; + goto free; ieee80211_tx_skb(sdata, skb); return 0; +free: + kfree_skb(skb); + return err; } /** -- cgit v0.10.2 From aa7a00809cf6afe3cd6f5af2889110b47b798667 Mon Sep 17 00:00:00 2001 From: Eyal Shapira Date: Mon, 6 Aug 2012 14:26:16 +0300 Subject: mac80211: avoid using synchronize_rcu in ieee80211_set_probe_resp This could take a while (100ms+) and may delay sending assoc resp in AP mode with WPS or P2P GO (as setting the probe resp takes place there). We've encountered situations where the delay was big enough to cause connection problems with devices like Galaxy Nexus. Switch to using call_rcu with a free handler. [Arik - rework to use plain buffer and instead of skb] Signed-off-by: Eyal Shapira Signed-off-by: Arik Nemtsov Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index df64b45..8052a7a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -725,25 +725,23 @@ static int ieee80211_set_monitor_channel(struct wiphy *wiphy, static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata, const u8 *resp, size_t resp_len) { - struct sk_buff *new, *old; + struct probe_resp *new, *old; if (!resp || !resp_len) - return 1; + return -EINVAL; old = rtnl_dereference(sdata->u.ap.probe_resp); - new = dev_alloc_skb(resp_len); + new = kzalloc(sizeof(struct probe_resp) + resp_len, GFP_KERNEL); if (!new) return -ENOMEM; - memcpy(skb_put(new, resp_len), resp, resp_len); + new->len = resp_len; + memcpy(new->data, resp, resp_len); rcu_assign_pointer(sdata->u.ap.probe_resp, new); - if (old) { - /* TODO: use call_rcu() */ - synchronize_rcu(); - dev_kfree_skb(old); - } + if (old) + kfree_rcu(old, rcu_head); return 0; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d1a7c58..e22aee8 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -272,9 +272,15 @@ struct beacon_data { struct rcu_head rcu_head; }; +struct probe_resp { + struct rcu_head rcu_head; + int len; + u8 data[0]; +}; + struct ieee80211_if_ap { struct beacon_data __rcu *beacon; - struct sk_buff __rcu *probe_resp; + struct probe_resp __rcu *probe_resp; struct list_head vlans; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index abee3a0..fbab7a8 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -715,7 +715,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, struct ieee80211_sub_if_data *vlan, *tmpsdata; struct beacon_data *old_beacon = rtnl_dereference(sdata->u.ap.beacon); - struct sk_buff *old_probe_resp = + struct probe_resp *old_probe_resp = rtnl_dereference(sdata->u.ap.probe_resp); /* sdata_running will return false, so this will disable */ @@ -727,7 +727,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, RCU_INIT_POINTER(sdata->u.ap.probe_resp, NULL); synchronize_rcu(); kfree(old_beacon); - kfree_skb(old_probe_resp); + kfree(old_probe_resp); /* down all dependent devices, that is VLANs */ list_for_each_entry_safe(vlan, tmpsdata, &sdata->u.ap.vlans, diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7dbcf29..2d004ba 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2481,7 +2481,8 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, struct ieee80211_vif *vif) { struct ieee80211_if_ap *ap = NULL; - struct sk_buff *presp = NULL, *skb = NULL; + struct sk_buff *skb = NULL; + struct probe_resp *presp = NULL; struct ieee80211_hdr *hdr; struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); @@ -2495,10 +2496,12 @@ struct sk_buff *ieee80211_proberesp_get(struct ieee80211_hw *hw, if (!presp) goto out; - skb = skb_copy(presp, GFP_ATOMIC); + skb = dev_alloc_skb(presp->len); if (!skb) goto out; + memcpy(skb_put(skb, presp->len), presp->data, presp->len); + hdr = (struct ieee80211_hdr *) skb->data; memset(hdr->addr1, 0, sizeof(hdr->addr1)); -- cgit v0.10.2 From b22bd5221cfe80ee3d345d9deccfd29edf9bafb4 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 9 Aug 2012 18:15:39 -0700 Subject: mac80211: use skb_queue_walk() in mesh_path_assign_nexthop Since all we really want is just to iterate over all skbs, do just that and avoid (de)queueing to a clusmy tmpq. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index bec7b28..b819d6b 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -203,23 +203,17 @@ void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta) { struct sk_buff *skb; struct ieee80211_hdr *hdr; - struct sk_buff_head tmpq; unsigned long flags; rcu_assign_pointer(mpath->next_hop, sta); - __skb_queue_head_init(&tmpq); - spin_lock_irqsave(&mpath->frame_queue.lock, flags); - - while ((skb = __skb_dequeue(&mpath->frame_queue)) != NULL) { + skb_queue_walk(&mpath->frame_queue, skb) { hdr = (struct ieee80211_hdr *) skb->data; memcpy(hdr->addr1, sta->sta.addr, ETH_ALEN); memcpy(hdr->addr2, mpath->sdata->vif.addr, ETH_ALEN); - __skb_queue_tail(&tmpq, skb); } - skb_queue_splice(&tmpq, &mpath->frame_queue); spin_unlock_irqrestore(&mpath->frame_queue.lock, flags); } -- cgit v0.10.2 From 4bd4c2dd8e734868ae9f0ceb87a6edd27df8f45c Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 9 Aug 2012 18:15:40 -0700 Subject: mac80211: clean up mpath_move_to_queue() Use skb_queue_walk_safe instead, and fix a few issues: - didn't free old skbs on moving - didn't react to failed skb alloc - needlessly held a local pointer to the destination frame queue - didn't check destination queue length before adding skb Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index faaa39b..e4d911f 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -215,6 +215,9 @@ struct mesh_rmc { /* Maximum number of paths per interface */ #define MESH_MAX_MPATHS 1024 +/* Number of frames buffered per destination for unresolved destinations */ +#define MESH_FRAME_QUEUE_LEN 10 + /* Public interfaces */ /* Various */ int ieee80211_fill_mesh_addresses(struct ieee80211_hdr *hdr, __le16 *fc, diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index 494bc39..47aeee2 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -17,8 +17,6 @@ #define MAX_METRIC 0xffffffff #define ARITH_SHIFT 8 -/* Number of frames buffered per destination for unresolved destinations */ -#define MESH_FRAME_QUEUE_LEN 10 #define MAX_PREQ_QUEUE_LEN 64 /* Destination only */ diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index b819d6b..aa74981 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -279,40 +279,42 @@ static void mesh_path_move_to_queue(struct mesh_path *gate_mpath, struct mesh_path *from_mpath, bool copy) { - struct sk_buff *skb, *cp_skb = NULL; - struct sk_buff_head gateq, failq; + struct sk_buff *skb, *fskb, *tmp; + struct sk_buff_head failq; unsigned long flags; - int num_skbs; BUG_ON(gate_mpath == from_mpath); BUG_ON(!gate_mpath->next_hop); - __skb_queue_head_init(&gateq); __skb_queue_head_init(&failq); spin_lock_irqsave(&from_mpath->frame_queue.lock, flags); skb_queue_splice_init(&from_mpath->frame_queue, &failq); spin_unlock_irqrestore(&from_mpath->frame_queue.lock, flags); - num_skbs = skb_queue_len(&failq); - - while (num_skbs--) { - skb = __skb_dequeue(&failq); - if (copy) { - cp_skb = skb_copy(skb, GFP_ATOMIC); - if (cp_skb) - __skb_queue_tail(&failq, cp_skb); + skb_queue_walk_safe(&failq, fskb, tmp) { + if (skb_queue_len(&gate_mpath->frame_queue) >= + MESH_FRAME_QUEUE_LEN) { + mpath_dbg(gate_mpath->sdata, "mpath queue full!\n"); + break; } + skb = skb_copy(fskb, GFP_ATOMIC); + if (WARN_ON(!skb)) + break; + prepare_for_gate(skb, gate_mpath->dst, gate_mpath); - __skb_queue_tail(&gateq, skb); + skb_queue_tail(&gate_mpath->frame_queue, skb); + + if (copy) + continue; + + __skb_unlink(fskb, &failq); + kfree_skb(fskb); } - spin_lock_irqsave(&gate_mpath->frame_queue.lock, flags); - skb_queue_splice(&gateq, &gate_mpath->frame_queue); mpath_dbg(gate_mpath->sdata, "Mpath queue for gate %pM has %d frames\n", gate_mpath->dst, skb_queue_len(&gate_mpath->frame_queue)); - spin_unlock_irqrestore(&gate_mpath->frame_queue.lock, flags); if (!copy) return; -- cgit v0.10.2 From e687f61eedab8895e5669cb82cebe0253631cd8c Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Sun, 12 Aug 2012 18:24:55 +0200 Subject: mac80211: add supported rates change notification in IBSS In IBSS it is possible that the supported rates set for a station changes over time (e.g. it gets first initialised as an empty set because of no available information about rates and updated later). In this case the driver has to be notified about the change in order to update its internal table accordingly (if needed). This behaviour is needed by all those drivers that handle rc internally but leave stations management to mac80211 Reported-by: Gui Iribarren Signed-off-by: Antonio Quartulli [Johannes - add docs, validate IBSS mode only, fix compilation] Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8114f59..d9cef31 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1897,10 +1897,14 @@ enum ieee80211_frame_release_type { * @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit * to this station changed. * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed. + * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer + * changed (in IBSS mode) due to discovering more information about + * the peer. */ enum ieee80211_rate_control_changed { IEEE80211_RC_BW_CHANGED = BIT(0), IEEE80211_RC_SMPS_CHANGED = BIT(1), + IEEE80211_RC_SUPP_RATES_CHANGED = BIT(2), }; /** diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index a81117a..a81154d 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -528,6 +528,9 @@ static inline void drv_sta_rc_update(struct ieee80211_local *local, sdata = get_bss_sdata(sdata); check_sdata_in_driver(sdata); + WARN_ON(changed & IEEE80211_RC_SUPP_RATES_CHANGED && + sdata->vif.type != NL80211_IFTYPE_ADHOC); + trace_drv_sta_rc_update(local, sdata, sta, changed); if (local->ops->sta_rc_update) local->ops->sta_rc_update(&local->hw, &sdata->vif, diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 1ebda2f..a9d9328 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -459,8 +459,11 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, } } - if (sta && rates_updated) + if (sta && rates_updated) { + drv_sta_rc_update(local, sdata, &sta->sta, + IEEE80211_RC_SUPP_RATES_CHANGED); rate_control_rate_init(sta); + } rcu_read_unlock(); } -- cgit v0.10.2 From 48613ece3d6a2613caa376f51477435cc080f3cd Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 5 Jul 2012 11:32:16 +0200 Subject: wireless: add radiotap A-MPDU status field Define the A-MPDU status field in radiotap, also update the radiotap parser for it and the MCS field that was apparently missed last time. Signed-off-by: Johannes Berg diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h index 7139254..7f0df13 100644 --- a/include/net/ieee80211_radiotap.h +++ b/include/net/ieee80211_radiotap.h @@ -183,6 +183,9 @@ struct ieee80211_radiotap_header { * Contains a bitmap of known fields/flags, the flags, and * the MCS index. * + * IEEE80211_RADIOTAP_AMPDU_STATUS u32, u16, u8, u8 unitless + * + * Contains the AMPDU information for the subframe. */ enum ieee80211_radiotap_type { IEEE80211_RADIOTAP_TSFT = 0, @@ -205,6 +208,7 @@ enum ieee80211_radiotap_type { IEEE80211_RADIOTAP_DATA_RETRIES = 17, IEEE80211_RADIOTAP_MCS = 19, + IEEE80211_RADIOTAP_AMPDU_STATUS = 20, /* valid in every it_present bitmap, even vendor namespaces */ IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29, @@ -270,6 +274,13 @@ enum ieee80211_radiotap_type { #define IEEE80211_RADIOTAP_MCS_FMT_GF 0x08 #define IEEE80211_RADIOTAP_MCS_FEC_LDPC 0x10 +/* For IEEE80211_RADIOTAP_AMPDU_STATUS */ +#define IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN 0x0001 +#define IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN 0x0002 +#define IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN 0x0004 +#define IEEE80211_RADIOTAP_AMPDU_IS_LAST 0x0008 +#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR 0x0010 +#define IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN 0x0020 /* helpers */ static inline int ieee80211_get_radiotap_len(unsigned char *data) diff --git a/net/wireless/radiotap.c b/net/wireless/radiotap.c index c4ad795..7d604c0 100644 --- a/net/wireless/radiotap.c +++ b/net/wireless/radiotap.c @@ -41,6 +41,8 @@ static const struct radiotap_align_size rtap_namespace_sizes[] = { [IEEE80211_RADIOTAP_TX_FLAGS] = { .align = 2, .size = 2, }, [IEEE80211_RADIOTAP_RTS_RETRIES] = { .align = 1, .size = 1, }, [IEEE80211_RADIOTAP_DATA_RETRIES] = { .align = 1, .size = 1, }, + [IEEE80211_RADIOTAP_MCS] = { .align = 1, .size = 3, }, + [IEEE80211_RADIOTAP_AMPDU_STATUS] = { .align = 4, .size = 8, }, /* * add more here as they are defined in radiotap.h */ -- cgit v0.10.2 From 4c29867790131c281ef96af507d85e3e5f829408 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 5 Jul 2012 11:34:31 +0200 Subject: mac80211: support A-MPDU status reporting Support getting A-MPDU status information from the drivers and reporting it to userspace via radiotap in the standard fields. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index d9cef31..edc235c 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -676,21 +676,41 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info) * @RX_FLAG_HT_GF: This frame was received in a HT-greenfield transmission, if * the driver fills this value it should add %IEEE80211_RADIOTAP_MCS_HAVE_FMT * to hw.radiotap_mcs_details to advertise that fact + * @RX_FLAG_AMPDU_DETAILS: A-MPDU details are known, in particular the reference + * number (@ampdu_reference) must be populated and be a distinct number for + * each A-MPDU + * @RX_FLAG_AMPDU_REPORT_ZEROLEN: driver reports 0-length subframes + * @RX_FLAG_AMPDU_IS_ZEROLEN: This is a zero-length subframe, for + * monitoring purposes only + * @RX_FLAG_AMPDU_LAST_KNOWN: last subframe is known, should be set on all + * subframes of a single A-MPDU + * @RX_FLAG_AMPDU_IS_LAST: this subframe is the last subframe of the A-MPDU + * @RX_FLAG_AMPDU_DELIM_CRC_ERROR: A delimiter CRC error has been detected + * on this subframe + * @RX_FLAG_AMPDU_DELIM_CRC_KNOWN: The delimiter CRC field is known (the CRC + * is stored in the @ampdu_delimiter_crc field) */ enum mac80211_rx_flags { - RX_FLAG_MMIC_ERROR = 1<<0, - RX_FLAG_DECRYPTED = 1<<1, - RX_FLAG_MMIC_STRIPPED = 1<<3, - RX_FLAG_IV_STRIPPED = 1<<4, - RX_FLAG_FAILED_FCS_CRC = 1<<5, - RX_FLAG_FAILED_PLCP_CRC = 1<<6, - RX_FLAG_MACTIME_MPDU = 1<<7, - RX_FLAG_SHORTPRE = 1<<8, - RX_FLAG_HT = 1<<9, - RX_FLAG_40MHZ = 1<<10, - RX_FLAG_SHORT_GI = 1<<11, - RX_FLAG_NO_SIGNAL_VAL = 1<<12, - RX_FLAG_HT_GF = 1<<13, + RX_FLAG_MMIC_ERROR = BIT(0), + RX_FLAG_DECRYPTED = BIT(1), + RX_FLAG_MMIC_STRIPPED = BIT(3), + RX_FLAG_IV_STRIPPED = BIT(4), + RX_FLAG_FAILED_FCS_CRC = BIT(5), + RX_FLAG_FAILED_PLCP_CRC = BIT(6), + RX_FLAG_MACTIME_MPDU = BIT(7), + RX_FLAG_SHORTPRE = BIT(8), + RX_FLAG_HT = BIT(9), + RX_FLAG_40MHZ = BIT(10), + RX_FLAG_SHORT_GI = BIT(11), + RX_FLAG_NO_SIGNAL_VAL = BIT(12), + RX_FLAG_HT_GF = BIT(13), + RX_FLAG_AMPDU_DETAILS = BIT(14), + RX_FLAG_AMPDU_REPORT_ZEROLEN = BIT(15), + RX_FLAG_AMPDU_IS_ZEROLEN = BIT(16), + RX_FLAG_AMPDU_LAST_KNOWN = BIT(17), + RX_FLAG_AMPDU_IS_LAST = BIT(18), + RX_FLAG_AMPDU_DELIM_CRC_ERROR = BIT(19), + RX_FLAG_AMPDU_DELIM_CRC_KNOWN = BIT(20), }; /** @@ -714,17 +734,22 @@ enum mac80211_rx_flags { * HT rates are use (RX_FLAG_HT) * @flag: %RX_FLAG_* * @rx_flags: internal RX flags for mac80211 + * @ampdu_reference: A-MPDU reference number, must be a different value for + * each A-MPDU but the same for each subframe within one A-MPDU + * @ampdu_delimiter_crc: A-MPDU delimiter CRC */ struct ieee80211_rx_status { u64 mactime; u32 device_timestamp; - u16 flag; + u32 ampdu_reference; + u32 flag; u16 freq; u8 rate_idx; u8 rx_flags; u8 band; u8 antenna; s8 signal; + u8 ampdu_delimiter_crc; }; /** diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 0cb4ede..78bf6c7 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -60,7 +60,9 @@ static inline int should_drop_frame(struct sk_buff *skb, struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - if (status->flag & (RX_FLAG_FAILED_FCS_CRC | RX_FLAG_FAILED_PLCP_CRC)) + if (status->flag & (RX_FLAG_FAILED_FCS_CRC | + RX_FLAG_FAILED_PLCP_CRC | + RX_FLAG_AMPDU_IS_ZEROLEN)) return 1; if (unlikely(skb->len < 16 + present_fcs_len)) return 1; @@ -91,6 +93,13 @@ ieee80211_rx_radiotap_len(struct ieee80211_local *local, if (status->flag & RX_FLAG_HT) /* HT info */ len += 3; + if (status->flag & RX_FLAG_AMPDU_DETAILS) { + /* padding */ + while (len & 3) + len++; + len += 8; + } + return len; } @@ -215,6 +224,37 @@ ieee80211_add_rx_radiotap_header(struct ieee80211_local *local, pos++; *pos++ = status->rate_idx; } + + if (status->flag & RX_FLAG_AMPDU_DETAILS) { + u16 flags = 0; + + /* ensure 4 byte alignment */ + while ((pos - (u8 *)rthdr) & 3) + pos++; + rthdr->it_present |= + cpu_to_le32(1 << IEEE80211_RADIOTAP_AMPDU_STATUS); + put_unaligned_le32(status->ampdu_reference, pos); + pos += 4; + if (status->flag & RX_FLAG_AMPDU_REPORT_ZEROLEN) + flags |= IEEE80211_RADIOTAP_AMPDU_REPORT_ZEROLEN; + if (status->flag & RX_FLAG_AMPDU_IS_ZEROLEN) + flags |= IEEE80211_RADIOTAP_AMPDU_IS_ZEROLEN; + if (status->flag & RX_FLAG_AMPDU_LAST_KNOWN) + flags |= IEEE80211_RADIOTAP_AMPDU_LAST_KNOWN; + if (status->flag & RX_FLAG_AMPDU_IS_LAST) + flags |= IEEE80211_RADIOTAP_AMPDU_IS_LAST; + if (status->flag & RX_FLAG_AMPDU_DELIM_CRC_ERROR) + flags |= IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_ERR; + if (status->flag & RX_FLAG_AMPDU_DELIM_CRC_KNOWN) + flags |= IEEE80211_RADIOTAP_AMPDU_DELIM_CRC_KNOWN; + put_unaligned_le16(flags, pos); + pos += 2; + if (status->flag & RX_FLAG_AMPDU_DELIM_CRC_KNOWN) + *pos++ = status->ampdu_delimiter_crc; + else + *pos++ = 0; + *pos++ = 0; + } } /* -- cgit v0.10.2 From 90bcf867ceef50155a1a14af4dc248061f6b8b94 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 15:48:38 +0200 Subject: mac80211: remove unneeded 'bssid' variable There's no need to copy the BSSID just to print it, remove the unnecessary variable. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9d60b49..b7c05bb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1696,7 +1696,6 @@ static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_local *local = sdata->local; - u8 bssid[ETH_ALEN]; u8 frame_buf[DEAUTH_DISASSOC_LEN]; mutex_lock(&ifmgd->mtx); @@ -1705,9 +1704,8 @@ static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata) return; } - memcpy(bssid, ifmgd->associated->bssid, ETH_ALEN); - - sdata_info(sdata, "Connection to AP %pM lost\n", bssid); + sdata_info(sdata, "Connection to AP %pM lost\n", + ifmgd->associated->bssid); ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, -- cgit v0.10.2 From 57eebdf3c28fe7134597acad529fc40f99b76601 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 15:50:46 +0200 Subject: mac80211: clean up CSA handling code Clean up the CSA handling code by moving some of it out of the if and using a C99 initializer for the struct passed to the driver method. While at it, also add a comment that we should wait for a beacon after switching the channel. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b7c05bb..ae524c9 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -712,6 +712,7 @@ static void ieee80211_chswitch_work(struct work_struct *work) /* XXX: shouldn't really modify cfg80211-owned data! */ ifmgd->associated->channel = sdata->local->oper_channel; + /* XXX: wait for a beacon first? */ ieee80211_wake_queues_by_reason(&sdata->local->hw, IEEE80211_QUEUE_STOP_REASON_CSA); out: @@ -788,36 +789,33 @@ void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, sdata->local->csa_channel = new_ch; + ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; + + if (sw_elem->mode) + ieee80211_stop_queues_by_reason(&sdata->local->hw, + IEEE80211_QUEUE_STOP_REASON_CSA); + if (sdata->local->ops->channel_switch) { /* use driver's channel switch callback */ - struct ieee80211_channel_switch ch_switch; - memset(&ch_switch, 0, sizeof(ch_switch)); - ch_switch.timestamp = timestamp; - if (sw_elem->mode) { - ch_switch.block_tx = true; - ieee80211_stop_queues_by_reason(&sdata->local->hw, - IEEE80211_QUEUE_STOP_REASON_CSA); - } - ch_switch.channel = new_ch; - ch_switch.count = sw_elem->count; - ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; + struct ieee80211_channel_switch ch_switch = { + .timestamp = timestamp, + .block_tx = sw_elem->mode, + .channel = new_ch, + .count = sw_elem->count, + }; + drv_channel_switch(sdata->local, &ch_switch); return; } /* channel switch handled in software */ - if (sw_elem->count <= 1) { + if (sw_elem->count <= 1) ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); - } else { - if (sw_elem->mode) - ieee80211_stop_queues_by_reason(&sdata->local->hw, - IEEE80211_QUEUE_STOP_REASON_CSA); - ifmgd->flags |= IEEE80211_STA_CSA_RECEIVED; + else mod_timer(&ifmgd->chswitch_timer, jiffies + msecs_to_jiffies(sw_elem->count * cbss->beacon_interval)); - } } static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, -- cgit v0.10.2 From 3049000b97bbfc90aa9ba413eadc4007e5bce2e0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 15:53:45 +0200 Subject: mac80211: fix CSA handling timer The time until the channel switch is in TU, not in milliseconds, so use TU_TO_EXP_TIME() to correctly program the timer. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ae524c9..9e61fe1 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -813,9 +813,8 @@ void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); else mod_timer(&ifmgd->chswitch_timer, - jiffies + - msecs_to_jiffies(sw_elem->count * - cbss->beacon_interval)); + TU_TO_EXP_TIME(sw_elem->count * + cbss->beacon_interval)); } static void ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, -- cgit v0.10.2 From 5bc1420b11903e9f8c470d3b33061b8de0c5c005 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 16:13:02 +0200 Subject: mac80211: check size of channel switch IE when parsing The channel switch IE has a fixed size, so we can discard it in parsing if it's not the right size and use the right struct pointer. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index e22aee8..793f03e 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1136,7 +1136,7 @@ struct ieee802_11_elems { u8 *prep; u8 *perr; struct ieee80211_rann_ie *rann; - u8 *ch_switch_elem; + struct ieee80211_channel_sw_ie *ch_switch_ie; u8 *country_elem; u8 *pwr_constr_elem; u8 *quiet_elem; /* first quite element */ @@ -1162,7 +1162,6 @@ struct ieee802_11_elems { u8 preq_len; u8 prep_len; u8 perr_len; - u8 ch_switch_elem_len; u8 country_elem_len; u8 pwr_constr_elem_len; u8 quiet_elem_len; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 9e61fe1..b9cb8db 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2267,14 +2267,10 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, mutex_unlock(&local->iflist_mtx); } - if (elems->ch_switch_elem && (elems->ch_switch_elem_len == 3) && - (memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid, - ETH_ALEN) == 0)) { - struct ieee80211_channel_sw_ie *sw_elem = - (struct ieee80211_channel_sw_ie *)elems->ch_switch_elem; - ieee80211_sta_process_chanswitch(sdata, sw_elem, + if (elems->ch_switch_ie && + memcmp(mgmt->bssid, sdata->u.mgd.associated->bssid, ETH_ALEN) == 0) + ieee80211_sta_process_chanswitch(sdata, elems->ch_switch_ie, bss, rx_status->mactime); - } } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 99e4258..7dff94e 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -768,8 +768,11 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, elem_parse_failed = true; break; case WLAN_EID_CHANNEL_SWITCH: - elems->ch_switch_elem = pos; - elems->ch_switch_elem_len = elen; + if (elen != sizeof(struct ieee80211_channel_sw_ie)) { + elem_parse_failed = true; + break; + } + elems->ch_switch_ie = (void *)pos; break; case WLAN_EID_QUIET: if (!elems->quiet_elem) { -- cgit v0.10.2 From cc74c0c7d6d623d0d3f13ef64895937edb7b3177 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 1 Aug 2012 16:49:34 +0200 Subject: mac80211: make ieee80211_beacon_connection_loss_work static There's no need to declare the function in the header file since it's only used in a single place, so make it static. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 793f03e..2a80698 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1430,7 +1430,6 @@ void ieee80211_sta_rx_notify(struct ieee80211_sub_if_data *sdata, struct ieee80211_hdr *hdr); void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, struct ieee80211_hdr *hdr, bool ack); -void ieee80211_beacon_connection_loss_work(struct work_struct *work); void ieee80211_wake_queues_by_reason(struct ieee80211_hw *hw, enum queue_stop_reason reason); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b9cb8db..ddb2db5 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1720,7 +1720,7 @@ static void __ieee80211_connection_loss(struct ieee80211_sub_if_data *sdata) mutex_unlock(&local->mtx); } -void ieee80211_beacon_connection_loss_work(struct work_struct *work) +static void ieee80211_beacon_connection_loss_work(struct work_struct *work) { struct ieee80211_sub_if_data *sdata = container_of(work, struct ieee80211_sub_if_data, -- cgit v0.10.2 From 98104fdeda63d57631c9f89e90a7b83b58fcee40 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 16 Jun 2012 00:19:54 +0200 Subject: cfg80211: add P2P Device abstraction In order to support using a different MAC address for the P2P Device address we must first have a P2P Device abstraction that can be assigned a MAC address. This abstraction will also be useful to support offloading P2P operations to the device, e.g. periodic listen for discoverability. Currently, the driver is responsible for assigning a MAC address to the P2P Device, but this could be changed by allowing a MAC address to be given to the NEW_INTERFACE command. As it has no associated netdev, a P2P Device can only be identified by its wdev identifier but the previous patches allowed using the wdev identifier in various APIs, e.g. remain-on-channel. Signed-off-by: Johannes Berg diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 2f38788..4584162 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -565,6 +565,14 @@ * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ with * %NL80211_ATTR_WIPHY_CHANNEL_TYPE. * + * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. It must have been created with + * %NL80211_CMD_NEW_INTERFACE previously. After it has been started, the + * P2P Device can be used for P2P operations, e.g. remain-on-channel and + * public action frame TX. + * @NL80211_CMD_STOP_P2P_DEVICE: Stop the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -708,6 +716,9 @@ enum nl80211_commands { NL80211_CMD_CH_SWITCH_NOTIFY, + NL80211_CMD_START_P2P_DEVICE, + NL80211_CMD_STOP_P2P_DEVICE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1575,6 +1586,10 @@ enum nl80211_attrs { * @NL80211_IFTYPE_MESH_POINT: mesh point * @NL80211_IFTYPE_P2P_CLIENT: P2P client * @NL80211_IFTYPE_P2P_GO: P2P group owner + * @NL80211_IFTYPE_P2P_DEVICE: P2P device interface type, this is not a netdev + * and therefore can't be created in the normal ways, use the + * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE + * commands to create and destroy one * @NL80211_IFTYPE_MAX: highest interface type number currently defined * @NUM_NL80211_IFTYPES: number of defined interface types * @@ -1593,6 +1608,7 @@ enum nl80211_iftype { NL80211_IFTYPE_MESH_POINT, NL80211_IFTYPE_P2P_CLIENT, NL80211_IFTYPE_P2P_GO, + NL80211_IFTYPE_P2P_DEVICE, /* keep last */ NUM_NL80211_IFTYPES, @@ -2994,12 +3010,18 @@ enum nl80211_ap_sme_features { * @NL80211_FEATURE_CELL_BASE_REG_HINTS: This driver has been tested * to work properly to suppport receiving regulatory hints from * cellular base stations. + * @NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL: If this is set, an active + * P2P Device (%NL80211_IFTYPE_P2P_DEVICE) requires its own channel + * in the interface combinations, even when it's only used for scan + * and remain-on-channel. This could be due to, for example, the + * remain-on-channel implementation requiring a channel context. */ enum nl80211_feature_flags { - NL80211_FEATURE_SK_TX_STATUS = 1 << 0, - NL80211_FEATURE_HT_IBSS = 1 << 1, - NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, - NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, + NL80211_FEATURE_SK_TX_STATUS = 1 << 0, + NL80211_FEATURE_HT_IBSS = 1 << 1, + NL80211_FEATURE_INACTIVITY_TIMER = 1 << 2, + NL80211_FEATURE_CELL_BASE_REG_HINTS = 1 << 3, + NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL = 1 << 4, }; /** diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 493fa0c..4c518f1 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1437,7 +1437,8 @@ struct cfg80211_gtk_rekey_data { * @add_virtual_intf: create a new virtual interface with the given name, * must set the struct wireless_dev's iftype. Beware: You must create * the new netdev in the wiphy's network namespace! Returns the struct - * wireless_dev, or an ERR_PTR. + * wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must + * also set the address member in the wdev. * * @del_virtual_intf: remove the virtual interface * @@ -1616,6 +1617,9 @@ struct cfg80211_gtk_rekey_data { * @get_channel: Get the current operating channel for the virtual interface. * For monitor interfaces, it should return %NULL unless there's a single * current monitoring channel. + * + * @start_p2p_device: Start the given P2P device. + * @stop_p2p_device: Stop the given P2P device. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -1832,6 +1836,11 @@ struct cfg80211_ops { (*get_channel)(struct wiphy *wiphy, struct wireless_dev *wdev, enum nl80211_channel_type *type); + + int (*start_p2p_device)(struct wiphy *wiphy, + struct wireless_dev *wdev); + void (*stop_p2p_device)(struct wiphy *wiphy, + struct wireless_dev *wdev); }; /* @@ -2395,6 +2404,8 @@ struct cfg80211_cached_keys; * @cleanup_work: work struct used for cleanup that can't be done directly * @beacon_interval: beacon interval used on this device for transmitting * beacons, 0 when not valid + * @address: The address for this device, valid only if @netdev is %NULL + * @p2p_started: true if this is a P2P Device that has been started */ struct wireless_dev { struct wiphy *wiphy; @@ -2413,7 +2424,9 @@ struct wireless_dev { struct work_struct cleanup_work; - bool use_4addr; + bool use_4addr, p2p_started; + + u8 address[ETH_ALEN] __aligned(sizeof(u16)); /* currently used for IBSS and SME - might be rearranged later */ u8 ssid[IEEE80211_MAX_SSID_LEN]; @@ -2461,6 +2474,13 @@ struct wireless_dev { #endif }; +static inline u8 *wdev_address(struct wireless_dev *wdev) +{ + if (wdev->netdev) + return wdev->netdev->dev_addr; + return wdev->address; +} + /** * wdev_priv - return wiphy priv from wireless_dev * @@ -3528,6 +3548,22 @@ void cfg80211_ch_switch_notify(struct net_device *dev, int freq, */ u32 cfg80211_calculate_bitrate(struct rate_info *rate); +/** + * cfg80211_unregister_wdev - remove the given wdev + * @wdev: struct wireless_dev to remove + * + * Call this function only for wdevs that have no netdev assigned, + * e.g. P2P Devices. It removes the device from the list so that + * it can no longer be used. It is necessary to call this function + * even when cfg80211 requests the removal of the interface by + * calling the del_virtual_intf() callback. The function must also + * be called when the driver wishes to unregister the wdev, e.g. + * when the device is unbound from the driver. + * + * Requires the RTNL to be held. + */ +void cfg80211_unregister_wdev(struct wireless_dev *wdev); + /* Logging, debugging and troubleshooting/diagnostic helpers. */ /* wiphy_printk helpers, similar to dev_printk */ diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index fbab7a8..366d9d3 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -449,6 +449,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_P2P_CLIENT: case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_P2P_DEVICE: /* cannot happen */ WARN_ON(1); break; @@ -1146,6 +1147,8 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, case NL80211_IFTYPE_WDS: case NL80211_IFTYPE_AP_VLAN: break; + case NL80211_IFTYPE_P2P_DEVICE: + /* not yet supported */ case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: BUG(); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 7dff94e..9a4e4e3 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1390,6 +1390,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) case NL80211_IFTYPE_MONITOR: /* ignore virtual */ break; + case NL80211_IFTYPE_P2P_DEVICE: + /* not yet supported */ case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_P2P_CLIENT: diff --git a/net/wireless/chan.c b/net/wireless/chan.c index d355f67..2f876b9 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -105,7 +105,7 @@ cfg80211_get_chan_state(struct wireless_dev *wdev, ASSERT_WDEV_LOCK(wdev); - if (!netif_running(wdev->netdev)) + if (wdev->netdev && !netif_running(wdev->netdev)) return; switch (wdev->iftype) { @@ -143,6 +143,11 @@ cfg80211_get_chan_state(struct wireless_dev *wdev, case NL80211_IFTYPE_WDS: /* these interface types don't really have a channel */ return; + case NL80211_IFTYPE_P2P_DEVICE: + if (wdev->wiphy->features & + NL80211_FEATURE_P2P_DEVICE_NEEDS_CHANNEL) + *chanmode = CHAN_MODE_EXCLUSIVE; + return; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: WARN_ON(1); diff --git a/net/wireless/core.c b/net/wireless/core.c index 31b40cc..91b3004 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -230,9 +230,24 @@ static int cfg80211_rfkill_set_block(void *data, bool blocked) rtnl_lock(); mutex_lock(&rdev->devlist_mtx); - list_for_each_entry(wdev, &rdev->wdev_list, list) - if (wdev->netdev) + list_for_each_entry(wdev, &rdev->wdev_list, list) { + if (wdev->netdev) { dev_close(wdev->netdev); + continue; + } + /* otherwise, check iftype */ + switch (wdev->iftype) { + case NL80211_IFTYPE_P2P_DEVICE: + if (!wdev->p2p_started) + break; + rdev->ops->stop_p2p_device(&rdev->wiphy, wdev); + wdev->p2p_started = false; + rdev->opencount--; + break; + default: + break; + } + } mutex_unlock(&rdev->devlist_mtx); rtnl_unlock(); @@ -407,6 +422,11 @@ static int wiphy_verify_combinations(struct wiphy *wiphy) if (WARN_ON(wiphy->software_iftypes & types)) return -EINVAL; + /* Only a single P2P_DEVICE can be allowed */ + if (WARN_ON(types & BIT(NL80211_IFTYPE_P2P_DEVICE) && + c->limits[j].max > 1)) + return -EINVAL; + cnt += c->limits[j].max; /* * Don't advertise an unsupported type @@ -734,6 +754,35 @@ static void wdev_cleanup_work(struct work_struct *work) dev_put(wdev->netdev); } +void cfg80211_unregister_wdev(struct wireless_dev *wdev) +{ + struct cfg80211_registered_device *rdev = wiphy_to_dev(wdev->wiphy); + + ASSERT_RTNL(); + + if (WARN_ON(wdev->netdev)) + return; + + mutex_lock(&rdev->devlist_mtx); + list_del_rcu(&wdev->list); + rdev->devlist_generation++; + + switch (wdev->iftype) { + case NL80211_IFTYPE_P2P_DEVICE: + if (!wdev->p2p_started) + break; + rdev->ops->stop_p2p_device(&rdev->wiphy, wdev); + wdev->p2p_started = false; + rdev->opencount--; + break; + default: + WARN_ON_ONCE(1); + break; + } + mutex_unlock(&rdev->devlist_mtx); +} +EXPORT_SYMBOL(cfg80211_unregister_wdev); + static struct device_type wiphy_type = { .name = "wlan", }; diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 1cdb1d5..8fd0242 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -736,7 +736,6 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev, const u8 *buf, size_t len, bool no_cck, bool dont_wait_for_ack, u64 *cookie) { - struct net_device *dev = wdev->netdev; const struct ieee80211_mgmt *mgmt; u16 stype; @@ -796,7 +795,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev, case NL80211_IFTYPE_AP: case NL80211_IFTYPE_P2P_GO: case NL80211_IFTYPE_AP_VLAN: - if (!ether_addr_equal(mgmt->bssid, dev->dev_addr)) + if (!ether_addr_equal(mgmt->bssid, wdev_address(wdev))) err = -EINVAL; break; case NL80211_IFTYPE_MESH_POINT: @@ -809,6 +808,11 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev, * cfg80211 doesn't track the stations */ break; + case NL80211_IFTYPE_P2P_DEVICE: + /* + * fall through, P2P device only supports + * public action frames + */ default: err = -EOPNOTSUPP; break; @@ -819,7 +823,7 @@ int cfg80211_mlme_mgmt_tx(struct cfg80211_registered_device *rdev, return err; } - if (!ether_addr_equal(mgmt->sa, dev->dev_addr)) + if (!ether_addr_equal(mgmt->sa, wdev_address(wdev))) return -EINVAL; /* Transmit the Action frame as requested by user space */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 97026f3..787aeaa 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1100,6 +1100,7 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (nla_put_u32(msg, i, NL80211_CMD_REGISTER_BEACONS)) goto nla_put_failure; } + CMD(start_p2p_device, START_P2P_DEVICE); #ifdef CONFIG_NL80211_TESTMODE CMD(testmode_cmd, TESTMODE); @@ -1748,13 +1749,13 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags, if (dev && (nla_put_u32(msg, NL80211_ATTR_IFINDEX, dev->ifindex) || - nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name) || - nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, dev->dev_addr))) + nla_put_string(msg, NL80211_ATTR_IFNAME, dev->name))) goto nla_put_failure; if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx) || nla_put_u32(msg, NL80211_ATTR_IFTYPE, wdev->iftype) || nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev)) || + nla_put(msg, NL80211_ATTR_MAC, ETH_ALEN, wdev_address(wdev)) || nla_put_u32(msg, NL80211_ATTR_GENERATION, rdev->devlist_generation ^ (cfg80211_rdev_list_generation << 2))) @@ -2021,8 +2022,10 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) return PTR_ERR(wdev); } - if (type == NL80211_IFTYPE_MESH_POINT && - info->attrs[NL80211_ATTR_MESH_ID]) { + switch (type) { + case NL80211_IFTYPE_MESH_POINT: + if (!info->attrs[NL80211_ATTR_MESH_ID]) + break; wdev_lock(wdev); BUILD_BUG_ON(IEEE80211_MAX_SSID_LEN != IEEE80211_MAX_MESH_ID_LEN); @@ -2031,6 +2034,26 @@ static int nl80211_new_interface(struct sk_buff *skb, struct genl_info *info) memcpy(wdev->ssid, nla_data(info->attrs[NL80211_ATTR_MESH_ID]), wdev->mesh_id_up_len); wdev_unlock(wdev); + break; + case NL80211_IFTYPE_P2P_DEVICE: + /* + * P2P Device doesn't have a netdev, so doesn't go + * through the netdev notifier and must be added here + */ + mutex_init(&wdev->mtx); + INIT_LIST_HEAD(&wdev->event_list); + spin_lock_init(&wdev->event_lock); + INIT_LIST_HEAD(&wdev->mgmt_registrations); + spin_lock_init(&wdev->mgmt_registrations_lock); + + mutex_lock(&rdev->devlist_mtx); + wdev->identifier = ++rdev->wdev_id; + list_add_rcu(&wdev->list, &rdev->wdev_list); + rdev->devlist_generation++; + mutex_unlock(&rdev->devlist_mtx); + break; + default: + break; } if (nl80211_send_iface(msg, info->snd_pid, info->snd_seq, 0, @@ -6053,6 +6076,7 @@ static int nl80211_register_mgmt(struct sk_buff *skb, struct genl_info *info) case NL80211_IFTYPE_AP_VLAN: case NL80211_IFTYPE_MESH_POINT: case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_P2P_DEVICE: break; default: return -EOPNOTSUPP; @@ -6099,6 +6123,7 @@ static int nl80211_tx_mgmt(struct sk_buff *skb, struct genl_info *info) case NL80211_IFTYPE_AP_VLAN: case NL80211_IFTYPE_MESH_POINT: case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_P2P_DEVICE: break; default: return -EOPNOTSUPP; @@ -6195,6 +6220,7 @@ static int nl80211_tx_mgmt_cancel_wait(struct sk_buff *skb, struct genl_info *in case NL80211_IFTYPE_AP: case NL80211_IFTYPE_AP_VLAN: case NL80211_IFTYPE_P2P_GO: + case NL80211_IFTYPE_P2P_DEVICE: break; default: return -EOPNOTSUPP; @@ -6810,6 +6836,68 @@ static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info) return 0; } +static int nl80211_start_p2p_device(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct wireless_dev *wdev = info->user_ptr[1]; + int err; + + if (!rdev->ops->start_p2p_device) + return -EOPNOTSUPP; + + if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE) + return -EOPNOTSUPP; + + if (wdev->p2p_started) + return 0; + + mutex_lock(&rdev->devlist_mtx); + err = cfg80211_can_add_interface(rdev, wdev->iftype); + mutex_unlock(&rdev->devlist_mtx); + if (err) + return err; + + err = rdev->ops->start_p2p_device(&rdev->wiphy, wdev); + if (err) + return err; + + wdev->p2p_started = true; + mutex_lock(&rdev->devlist_mtx); + rdev->opencount++; + mutex_unlock(&rdev->devlist_mtx); + + return 0; +} + +static int nl80211_stop_p2p_device(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct wireless_dev *wdev = info->user_ptr[1]; + + if (wdev->iftype != NL80211_IFTYPE_P2P_DEVICE) + return -EOPNOTSUPP; + + if (!rdev->ops->stop_p2p_device) + return -EOPNOTSUPP; + + if (!wdev->p2p_started) + return 0; + + rdev->ops->stop_p2p_device(&rdev->wiphy, wdev); + wdev->p2p_started = false; + + mutex_lock(&rdev->devlist_mtx); + rdev->opencount--; + mutex_unlock(&rdev->devlist_mtx); + + if (WARN_ON(rdev->scan_req && rdev->scan_req->wdev == wdev)) { + rdev->scan_req->aborted = true; + ___cfg80211_scan_done(rdev, true); + } + + return 0; +} + #define NL80211_FLAG_NEED_WIPHY 0x01 #define NL80211_FLAG_NEED_NETDEV 0x02 #define NL80211_FLAG_NEED_RTNL 0x04 @@ -6817,7 +6905,7 @@ static int nl80211_register_beacons(struct sk_buff *skb, struct genl_info *info) #define NL80211_FLAG_NEED_NETDEV_UP (NL80211_FLAG_NEED_NETDEV |\ NL80211_FLAG_CHECK_NETDEV_UP) #define NL80211_FLAG_NEED_WDEV 0x10 -/* If a netdev is associated, it must be UP */ +/* If a netdev is associated, it must be UP, P2P must be started */ #define NL80211_FLAG_NEED_WDEV_UP (NL80211_FLAG_NEED_WDEV |\ NL80211_FLAG_CHECK_NETDEV_UP) @@ -6878,6 +6966,13 @@ static int nl80211_pre_doit(struct genl_ops *ops, struct sk_buff *skb, } dev_hold(dev); + } else if (ops->internal_flags & NL80211_FLAG_CHECK_NETDEV_UP) { + if (!wdev->p2p_started) { + mutex_unlock(&cfg80211_mutex); + if (rtnl) + rtnl_unlock(); + return -ENETDOWN; + } } cfg80211_lock_rdev(rdev); @@ -7439,7 +7534,22 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, - + { + .cmd = NL80211_CMD_START_P2P_DEVICE, + .doit = nl80211_start_p2p_device, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_WDEV | + NL80211_FLAG_NEED_RTNL, + }, + { + .cmd = NL80211_CMD_STOP_P2P_DEVICE, + .doit = nl80211_stop_p2p_device, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_WDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { diff --git a/net/wireless/util.c b/net/wireless/util.c index ce393dd..d7b6722 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -800,6 +800,10 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev, if (otype == NL80211_IFTYPE_AP_VLAN) return -EOPNOTSUPP; + /* cannot change into P2P device type */ + if (ntype == NL80211_IFTYPE_P2P_DEVICE) + return -EOPNOTSUPP; + if (!rdev->ops->change_virtual_intf || !(rdev->wiphy.interface_modes & (1 << ntype))) return -EOPNOTSUPP; @@ -877,6 +881,9 @@ int cfg80211_change_iface(struct cfg80211_registered_device *rdev, case NUM_NL80211_IFTYPES: /* not happening */ break; + case NL80211_IFTYPE_P2P_DEVICE: + WARN_ON(1); + break; } } @@ -1041,8 +1048,15 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, list_for_each_entry(wdev_iter, &rdev->wdev_list, list) { if (wdev_iter == wdev) continue; - if (!netif_running(wdev_iter->netdev)) - continue; + if (wdev_iter->netdev) { + if (!netif_running(wdev_iter->netdev)) + continue; + } else if (wdev_iter->iftype == NL80211_IFTYPE_P2P_DEVICE) { + if (!wdev_iter->p2p_started) + continue; + } else { + WARN_ON(1); + } if (rdev->wiphy.software_iftypes & BIT(wdev_iter->iftype)) continue; -- cgit v0.10.2 From f142c6b906da451ded2c7a8e17b2a0e6fee3e891 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 18 Jun 2012 20:07:15 +0200 Subject: mac80211: support P2P Device abstraction After cfg80211 got a P2P Device abstraction, add support to mac80211. Whether it really is supported or not will depend on whether or not the driver has support for it, but mac80211 needs to change to be able to support drivers that need a P2P Device. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8052a7a..69b322f 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -102,6 +102,18 @@ static int ieee80211_change_iface(struct wiphy *wiphy, return 0; } +static int ieee80211_start_p2p_device(struct wiphy *wiphy, + struct wireless_dev *wdev) +{ + return ieee80211_do_open(wdev, true); +} + +static void ieee80211_stop_p2p_device(struct wiphy *wiphy, + struct wireless_dev *wdev) +{ + ieee80211_sdata_stop(IEEE80211_WDEV_TO_SUB_IF(wdev)); +} + static int ieee80211_set_noack_map(struct wiphy *wiphy, struct net_device *dev, u16 noack_map) @@ -1774,6 +1786,7 @@ static int ieee80211_scan(struct wiphy *wiphy, case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_MESH_POINT: case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_DEVICE: break; case NL80211_IFTYPE_P2P_GO: if (sdata->local->ops->hw_scan) @@ -2461,6 +2474,9 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, if (!sdata->u.mgd.associated) need_offchan = true; break; + case NL80211_IFTYPE_P2P_DEVICE: + need_offchan = true; + break; default: return -EOPNOTSUPP; } @@ -3013,6 +3029,8 @@ struct cfg80211_ops mac80211_config_ops = { .add_virtual_intf = ieee80211_add_iface, .del_virtual_intf = ieee80211_del_iface, .change_virtual_intf = ieee80211_change_iface, + .start_p2p_device = ieee80211_start_p2p_device, + .stop_p2p_device = ieee80211_stop_p2p_device, .add_key = ieee80211_add_key, .del_key = ieee80211_del_key, .get_key = ieee80211_get_key, diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index a81154d..da9003b 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -9,7 +9,7 @@ static inline void check_sdata_in_driver(struct ieee80211_sub_if_data *sdata) { WARN(!(sdata->flags & IEEE80211_SDATA_IN_DRIVER), "%s: Failed check-sdata-in-driver check, flags: 0x%x\n", - sdata->dev->name, sdata->flags); + sdata->dev ? sdata->dev->name : sdata->name, sdata->flags); } static inline struct ieee80211_sub_if_data * diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 2a80698..0b81fa8 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1080,6 +1080,8 @@ struct ieee80211_local { struct idr ack_status_frames; spinlock_t ack_status_lock; + struct ieee80211_sub_if_data __rcu *p2p_sdata; + /* dummy netdev for use w/ NAPI */ struct net_device napi_dev; @@ -1296,6 +1298,8 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local); void ieee80211_recalc_idle(struct ieee80211_local *local); void ieee80211_adjust_monitor_flags(struct ieee80211_sub_if_data *sdata, const int offset); +int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up); +void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata); static inline bool ieee80211_sdata_running(struct ieee80211_sub_if_data *sdata) { diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 366d9d3..152aeea 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -100,6 +100,10 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) sdata->vif.bss_conf.idle = true; continue; } + + if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) + continue; + /* count everything else */ sdata->vif.bss_conf.idle = false; count++; @@ -121,7 +125,8 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type == NL80211_IFTYPE_MONITOR || - sdata->vif.type == NL80211_IFTYPE_AP_VLAN) + sdata->vif.type == NL80211_IFTYPE_AP_VLAN || + sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) continue; if (sdata->old_idle == sdata->vif.bss_conf.idle) continue; @@ -204,6 +209,8 @@ static inline int identical_mac_addr_allowed(int type1, int type2) { return type1 == NL80211_IFTYPE_MONITOR || type2 == NL80211_IFTYPE_MONITOR || + type1 == NL80211_IFTYPE_P2P_DEVICE || + type2 == NL80211_IFTYPE_P2P_DEVICE || (type1 == NL80211_IFTYPE_AP && type2 == NL80211_IFTYPE_WDS) || (type1 == NL80211_IFTYPE_WDS && (type2 == NL80211_IFTYPE_WDS || @@ -406,9 +413,10 @@ static void ieee80211_del_virtual_monitor(struct ieee80211_local *local) * an error on interface type changes that have been pre-checked, so most * checks should be in ieee80211_check_concurrent_iface. */ -static int ieee80211_do_open(struct net_device *dev, bool coming_up) +int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_sub_if_data *sdata = IEEE80211_WDEV_TO_SUB_IF(wdev); + struct net_device *dev = wdev->netdev; struct ieee80211_local *local = sdata->local; struct sta_info *sta; u32 changed = 0; @@ -443,13 +451,13 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) case NL80211_IFTYPE_STATION: case NL80211_IFTYPE_MONITOR: case NL80211_IFTYPE_ADHOC: + case NL80211_IFTYPE_P2P_DEVICE: /* no special treatment */ break; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_P2P_CLIENT: case NL80211_IFTYPE_P2P_GO: - case NL80211_IFTYPE_P2P_DEVICE: /* cannot happen */ WARN_ON(1); break; @@ -472,7 +480,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) * Copy the hopefully now-present MAC address to * this interface, if it has the special null one. */ - if (is_zero_ether_addr(dev->dev_addr)) { + if (dev && is_zero_ether_addr(dev->dev_addr)) { memcpy(dev->dev_addr, local->hw.wiphy->perm_addr, ETH_ALEN); @@ -537,7 +545,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) local->fif_probe_req++; } - changed |= ieee80211_reset_erp_info(sdata); + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) + changed |= ieee80211_reset_erp_info(sdata); ieee80211_bss_info_change_notify(sdata, changed); switch (sdata->vif.type) { @@ -548,6 +557,7 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) netif_carrier_off(dev); break; case NL80211_IFTYPE_WDS: + case NL80211_IFTYPE_P2P_DEVICE: break; default: netif_carrier_on(dev); @@ -584,6 +594,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) rate_control_rate_init(sta); netif_carrier_on(dev); + } else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { + rcu_assign_pointer(local->p2p_sdata, sdata); } /* @@ -609,7 +621,8 @@ static int ieee80211_do_open(struct net_device *dev, bool coming_up) ieee80211_recalc_ps(local, -1); - netif_tx_start_all_queues(dev); + if (dev) + netif_tx_start_all_queues(dev); return 0; err_del_interface: @@ -639,7 +652,7 @@ static int ieee80211_open(struct net_device *dev) if (err) return err; - return ieee80211_do_open(dev, true); + return ieee80211_do_open(&sdata->wdev, true); } static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, @@ -660,7 +673,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, /* * Stop TX on this interface first. */ - netif_tx_stop_all_queues(sdata->dev); + if (sdata->dev) + netif_tx_stop_all_queues(sdata->dev); ieee80211_roc_purge(sdata); @@ -699,14 +713,16 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, local->fif_probe_req--; } - netif_addr_lock_bh(sdata->dev); - spin_lock_bh(&local->filter_lock); - __hw_addr_unsync(&local->mc_list, &sdata->dev->mc, - sdata->dev->addr_len); - spin_unlock_bh(&local->filter_lock); - netif_addr_unlock_bh(sdata->dev); + if (sdata->dev) { + netif_addr_lock_bh(sdata->dev); + spin_lock_bh(&local->filter_lock); + __hw_addr_unsync(&local->mc_list, &sdata->dev->mc, + sdata->dev->addr_len); + spin_unlock_bh(&local->filter_lock); + netif_addr_unlock_bh(sdata->dev); - ieee80211_configure_filter(local); + ieee80211_configure_filter(local); + } del_timer_sync(&local->dynamic_ps_timer); cancel_work_sync(&local->dynamic_ps_enable_work); @@ -767,6 +783,10 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, ieee80211_adjust_monitor_flags(sdata, -1); ieee80211_configure_filter(local); break; + case NL80211_IFTYPE_P2P_DEVICE: + /* relies on synchronize_rcu() below */ + rcu_assign_pointer(local->p2p_sdata, NULL); + /* fall through */ default: flush_work(&sdata->work); /* @@ -877,9 +897,8 @@ static void ieee80211_set_multicast_list(struct net_device *dev) * Called when the netdev is removed or, by the code below, before * the interface type changes. */ -static void ieee80211_teardown_sdata(struct net_device *dev) +static void ieee80211_teardown_sdata(struct ieee80211_sub_if_data *sdata) { - struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = sdata->local; int flushed; int i; @@ -900,6 +919,11 @@ static void ieee80211_teardown_sdata(struct net_device *dev) WARN_ON(flushed); } +static void ieee80211_uninit(struct net_device *dev) +{ + ieee80211_teardown_sdata(IEEE80211_DEV_TO_SUB_IF(dev)); +} + static u16 ieee80211_netdev_select_queue(struct net_device *dev, struct sk_buff *skb) { @@ -909,7 +933,7 @@ static u16 ieee80211_netdev_select_queue(struct net_device *dev, static const struct net_device_ops ieee80211_dataif_ops = { .ndo_open = ieee80211_open, .ndo_stop = ieee80211_stop, - .ndo_uninit = ieee80211_teardown_sdata, + .ndo_uninit = ieee80211_uninit, .ndo_start_xmit = ieee80211_subif_start_xmit, .ndo_set_rx_mode = ieee80211_set_multicast_list, .ndo_change_mtu = ieee80211_change_mtu, @@ -940,7 +964,7 @@ static u16 ieee80211_monitor_select_queue(struct net_device *dev, static const struct net_device_ops ieee80211_monitorif_ops = { .ndo_open = ieee80211_open, .ndo_stop = ieee80211_stop, - .ndo_uninit = ieee80211_teardown_sdata, + .ndo_uninit = ieee80211_uninit, .ndo_start_xmit = ieee80211_monitor_start_xmit, .ndo_set_rx_mode = ieee80211_set_multicast_list, .ndo_change_mtu = ieee80211_change_mtu, @@ -1099,7 +1123,6 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, /* and set some type-dependent values */ sdata->vif.type = type; sdata->vif.p2p = false; - sdata->dev->netdev_ops = &ieee80211_dataif_ops; sdata->wdev.iftype = type; sdata->control_port_protocol = cpu_to_be16(ETH_P_PAE); @@ -1107,8 +1130,11 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, sdata->noack_map = 0; - /* only monitor differs */ - sdata->dev->type = ARPHRD_ETHER; + /* only monitor/p2p-device differ */ + if (sdata->dev) { + sdata->dev->netdev_ops = &ieee80211_dataif_ops; + sdata->dev->type = ARPHRD_ETHER; + } skb_queue_head_init(&sdata->skb_queue); INIT_WORK(&sdata->work, ieee80211_iface_work); @@ -1146,9 +1172,8 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, break; case NL80211_IFTYPE_WDS: case NL80211_IFTYPE_AP_VLAN: - break; case NL80211_IFTYPE_P2P_DEVICE: - /* not yet supported */ + break; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: BUG(); @@ -1215,7 +1240,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, ieee80211_do_stop(sdata, false); - ieee80211_teardown_sdata(sdata->dev); + ieee80211_teardown_sdata(sdata); ret = drv_change_interface(local, sdata, internal_type, p2p); if (ret) @@ -1230,7 +1255,7 @@ static int ieee80211_runtime_change_iftype(struct ieee80211_sub_if_data *sdata, ieee80211_setup_sdata(sdata, type); - err = ieee80211_do_open(sdata->dev, false); + err = ieee80211_do_open(&sdata->wdev, false); WARN(err, "type change: do_open returned %d", err); return ret; @@ -1257,7 +1282,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, return ret; } else { /* Purge and reset type-dependent state. */ - ieee80211_teardown_sdata(sdata->dev); + ieee80211_teardown_sdata(sdata); ieee80211_setup_sdata(sdata, type); } @@ -1273,8 +1298,7 @@ int ieee80211_if_change_type(struct ieee80211_sub_if_data *sdata, } static void ieee80211_assign_perm_addr(struct ieee80211_local *local, - struct net_device *dev, - enum nl80211_iftype type) + u8 *perm_addr, enum nl80211_iftype type) { struct ieee80211_sub_if_data *sdata; u64 mask, start, addr, val, inc; @@ -1283,7 +1307,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, int i; /* default ... something at least */ - memcpy(dev->perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN); + memcpy(perm_addr, local->hw.wiphy->perm_addr, ETH_ALEN); if (is_zero_ether_addr(local->hw.wiphy->addr_mask) && local->hw.wiphy->n_addresses <= 1) @@ -1302,7 +1326,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type != NL80211_IFTYPE_AP) continue; - memcpy(dev->perm_addr, sdata->vif.addr, ETH_ALEN); + memcpy(perm_addr, sdata->vif.addr, ETH_ALEN); break; } /* keep default if no AP interface present */ @@ -1321,7 +1345,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, } if (!used) { - memcpy(dev->perm_addr, + memcpy(perm_addr, local->hw.wiphy->addresses[i].addr, ETH_ALEN); break; @@ -1372,7 +1396,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, } if (!used) { - memcpy(dev->perm_addr, tmp_addr, ETH_ALEN); + memcpy(perm_addr, tmp_addr, ETH_ALEN); break; } addr = (start & ~mask) | (val & mask); @@ -1388,49 +1412,68 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, struct wireless_dev **new_wdev, enum nl80211_iftype type, struct vif_params *params) { - struct net_device *ndev; + struct net_device *ndev = NULL; struct ieee80211_sub_if_data *sdata = NULL; int ret, i; int txqs = 1; ASSERT_RTNL(); - if (local->hw.queues >= IEEE80211_NUM_ACS) - txqs = IEEE80211_NUM_ACS; - - ndev = alloc_netdev_mqs(sizeof(*sdata) + local->hw.vif_data_size, - name, ieee80211_if_setup, txqs, 1); - if (!ndev) - return -ENOMEM; - dev_net_set(ndev, wiphy_net(local->hw.wiphy)); - - ndev->needed_headroom = local->tx_headroom + - 4*6 /* four MAC addresses */ - + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */ - + 6 /* mesh */ - + 8 /* rfc1042/bridge tunnel */ - - ETH_HLEN /* ethernet hard_header_len */ - + IEEE80211_ENCRYPT_HEADROOM; - ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM; - - ret = dev_alloc_name(ndev, ndev->name); - if (ret < 0) - goto fail; - - ieee80211_assign_perm_addr(local, ndev, type); - memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN); - SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy)); - - /* don't use IEEE80211_DEV_TO_SUB_IF because it checks too much */ - sdata = netdev_priv(ndev); - ndev->ieee80211_ptr = &sdata->wdev; - memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN); - memcpy(sdata->name, ndev->name, IFNAMSIZ); + if (type == NL80211_IFTYPE_P2P_DEVICE) { + struct wireless_dev *wdev; + + sdata = kzalloc(sizeof(*sdata) + local->hw.vif_data_size, + GFP_KERNEL); + if (!sdata) + return -ENOMEM; + wdev = &sdata->wdev; + + sdata->dev = NULL; + strlcpy(sdata->name, name, IFNAMSIZ); + ieee80211_assign_perm_addr(local, wdev->address, type); + memcpy(sdata->vif.addr, wdev->address, ETH_ALEN); + } else { + if (local->hw.queues >= IEEE80211_NUM_ACS) + txqs = IEEE80211_NUM_ACS; + + ndev = alloc_netdev_mqs(sizeof(*sdata) + + local->hw.vif_data_size, + name, ieee80211_if_setup, txqs, 1); + if (!ndev) + return -ENOMEM; + dev_net_set(ndev, wiphy_net(local->hw.wiphy)); + + ndev->needed_headroom = local->tx_headroom + + 4*6 /* four MAC addresses */ + + 2 + 2 + 2 + 2 /* ctl, dur, seq, qos */ + + 6 /* mesh */ + + 8 /* rfc1042/bridge tunnel */ + - ETH_HLEN /* ethernet hard_header_len */ + + IEEE80211_ENCRYPT_HEADROOM; + ndev->needed_tailroom = IEEE80211_ENCRYPT_TAILROOM; + + ret = dev_alloc_name(ndev, ndev->name); + if (ret < 0) { + free_netdev(ndev); + return ret; + } + + ieee80211_assign_perm_addr(local, ndev->perm_addr, type); + memcpy(ndev->dev_addr, ndev->perm_addr, ETH_ALEN); + SET_NETDEV_DEV(ndev, wiphy_dev(local->hw.wiphy)); + + /* don't use IEEE80211_DEV_TO_SUB_IF -- it checks too much */ + sdata = netdev_priv(ndev); + ndev->ieee80211_ptr = &sdata->wdev; + memcpy(sdata->vif.addr, ndev->dev_addr, ETH_ALEN); + memcpy(sdata->name, ndev->name, IFNAMSIZ); + + sdata->dev = ndev; + } /* initialise type-independent data */ sdata->wdev.wiphy = local->hw.wiphy; sdata->local = local; - sdata->dev = ndev; #ifdef CONFIG_INET sdata->arp_filter_state = true; #endif @@ -1459,17 +1502,21 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, /* setup type-dependent data */ ieee80211_setup_sdata(sdata, type); - if (params) { - ndev->ieee80211_ptr->use_4addr = params->use_4addr; - if (type == NL80211_IFTYPE_STATION) - sdata->u.mgd.use_4addr = params->use_4addr; - } + if (ndev) { + if (params) { + ndev->ieee80211_ptr->use_4addr = params->use_4addr; + if (type == NL80211_IFTYPE_STATION) + sdata->u.mgd.use_4addr = params->use_4addr; + } - ndev->features |= local->hw.netdev_features; + ndev->features |= local->hw.netdev_features; - ret = register_netdevice(ndev); - if (ret) - goto fail; + ret = register_netdevice(ndev); + if (ret) { + free_netdev(ndev); + return ret; + } + } mutex_lock(&local->iflist_mtx); list_add_tail_rcu(&sdata->list, &local->interfaces); @@ -1479,10 +1526,6 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, *new_wdev = &sdata->wdev; return 0; - - fail: - free_netdev(ndev); - return ret; } void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata) @@ -1494,7 +1537,21 @@ void ieee80211_if_remove(struct ieee80211_sub_if_data *sdata) mutex_unlock(&sdata->local->iflist_mtx); synchronize_rcu(); - unregister_netdevice(sdata->dev); + + if (sdata->dev) { + unregister_netdevice(sdata->dev); + } else { + cfg80211_unregister_wdev(&sdata->wdev); + kfree(sdata); + } +} + +void ieee80211_sdata_stop(struct ieee80211_sub_if_data *sdata) +{ + if (WARN_ON_ONCE(!test_bit(SDATA_STATE_RUNNING, &sdata->state))) + return; + ieee80211_do_stop(sdata, true); + ieee80211_teardown_sdata(sdata); } /* @@ -1505,6 +1562,7 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) { struct ieee80211_sub_if_data *sdata, *tmp; LIST_HEAD(unreg_list); + LIST_HEAD(wdev_list); ASSERT_RTNL(); @@ -1512,11 +1570,20 @@ void ieee80211_remove_interfaces(struct ieee80211_local *local) list_for_each_entry_safe(sdata, tmp, &local->interfaces, list) { list_del(&sdata->list); - unregister_netdevice_queue(sdata->dev, &unreg_list); + if (sdata->dev) + unregister_netdevice_queue(sdata->dev, &unreg_list); + else + list_add(&sdata->list, &wdev_list); } mutex_unlock(&local->iflist_mtx); unregister_netdevice_many(&unreg_list); list_del(&unreg_list); + + list_for_each_entry_safe(sdata, tmp, &wdev_list, list) { + list_del(&sdata->list); + cfg80211_unregister_wdev(&sdata->wdev); + kfree(sdata); + } } static int netdev_notify(struct notifier_block *nb, diff --git a/net/mac80211/main.c b/net/mac80211/main.c index c26e231..e706f9e 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -207,6 +207,10 @@ void ieee80211_bss_info_change_notify(struct ieee80211_sub_if_data *sdata, sdata->vif.bss_conf.bssid = NULL; else if (ieee80211_vif_is_mesh(&sdata->vif)) { sdata->vif.bss_conf.bssid = zero; + } else if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) { + sdata->vif.bss_conf.bssid = sdata->vif.addr; + WARN_ONCE(changed & ~(BSS_CHANGED_IDLE), + "P2P Device BSS changed %#x", changed); } else { WARN_ON(1); return; @@ -514,6 +518,11 @@ ieee80211_default_mgmt_stypes[NUM_NL80211_IFTYPES] = { BIT(IEEE80211_STYPE_AUTH >> 4) | BIT(IEEE80211_STYPE_DEAUTH >> 4), }, + [NL80211_IFTYPE_P2P_DEVICE] = { + .tx = 0xffff, + .rx = BIT(IEEE80211_STYPE_ACTION >> 4) | + BIT(IEEE80211_STYPE_PROBE_REQ >> 4), + }, }; static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 635c325..507121d 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -116,6 +116,9 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local, if (!ieee80211_sdata_running(sdata)) continue; + if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) + continue; + if (sdata->vif.type != NL80211_IFTYPE_MONITOR) set_bit(SDATA_STATE_OFFCHANNEL, &sdata->state); @@ -144,6 +147,9 @@ void ieee80211_offchannel_return(struct ieee80211_local *local, mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) + continue; + if (sdata->vif.type != NL80211_IFTYPE_MONITOR) clear_bit(SDATA_STATE_OFFCHANNEL, &sdata->state); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 78bf6c7..f5258eb 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2812,8 +2812,7 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx, if (!bssid) { if (!ether_addr_equal(sdata->vif.addr, hdr->addr1)) return 0; - } else if (!ieee80211_bssid_match(bssid, - sdata->vif.addr)) { + } else if (!ieee80211_bssid_match(bssid, sdata->vif.addr)) { /* * Accept public action frames even when the * BSSID doesn't match, this is used for P2P @@ -2833,9 +2832,18 @@ static int prepare_for_handlers(struct ieee80211_rx_data *rx, if (!ether_addr_equal(sdata->u.wds.remote_addr, hdr->addr2)) return 0; break; + case NL80211_IFTYPE_P2P_DEVICE: + if (!ieee80211_is_public_action(hdr, skb->len) && + !ieee80211_is_probe_req(hdr->frame_control) && + !ieee80211_is_probe_resp(hdr->frame_control) && + !ieee80211_is_beacon(hdr->frame_control)) + return 0; + if (!ether_addr_equal(sdata->vif.addr, hdr->addr1)) + status->rx_flags &= ~IEEE80211_RX_RA_MATCH; + break; default: /* should never get here */ - WARN_ON(1); + WARN_ON_ONCE(1); break; } diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 8cd7291..b0801b7 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -519,19 +519,27 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) u64 cookie = (unsigned long)skb; acked = info->flags & IEEE80211_TX_STAT_ACK; - /* - * TODO: When we have non-netdev frame TX, - * we cannot use skb->dev->ieee80211_ptr - */ - if (ieee80211_is_nullfunc(hdr->frame_control) || - ieee80211_is_qos_nullfunc(hdr->frame_control)) + ieee80211_is_qos_nullfunc(hdr->frame_control)) { cfg80211_probe_status(skb->dev, hdr->addr1, cookie, acked, GFP_ATOMIC); - else + } else if (skb->dev) { cfg80211_mgmt_tx_status( skb->dev->ieee80211_ptr, cookie, skb->data, skb->len, acked, GFP_ATOMIC); + } else { + struct ieee80211_sub_if_data *p2p_sdata; + + rcu_read_lock(); + + p2p_sdata = rcu_dereference(local->p2p_sdata); + if (p2p_sdata) { + cfg80211_mgmt_tx_status( + &p2p_sdata->wdev, cookie, skb->data, + skb->len, acked, GFP_ATOMIC); + } + rcu_read_unlock(); + } } if (unlikely(info->ack_frame_id)) { diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index c6d33b5..65e9a2a 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -24,7 +24,7 @@ __string(vif_name, sdata->dev ? sdata->dev->name : "") #define VIF_ASSIGN __entry->vif_type = sdata->vif.type; __entry->sdata = sdata; \ __entry->p2p = sdata->vif.p2p; \ - __assign_str(vif_name, sdata->dev ? sdata->dev->name : "") + __assign_str(vif_name, sdata->dev ? sdata->dev->name : sdata->name) #define VIF_PR_FMT " vif:%s(%d%s)" #define VIF_PR_ARG __get_str(vif_name), __entry->vif_type, __entry->p2p ? "/p2p" : "" diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 9a4e4e3..79bce87 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -276,6 +276,9 @@ void ieee80211_propagate_queue_wake(struct ieee80211_local *local, int queue) list_for_each_entry_rcu(sdata, &local->interfaces, list) { int ac; + if (!sdata->dev) + continue; + if (test_bit(SDATA_STATE_OFFCHANNEL, &sdata->state)) continue; @@ -364,6 +367,9 @@ static void __ieee80211_stop_queue(struct ieee80211_hw *hw, int queue, list_for_each_entry_rcu(sdata, &local->interfaces, list) { int ac; + if (!sdata->dev) + continue; + for (ac = 0; ac < n_acs; ac++) { if (sdata->vif.hw_queue[ac] == queue || sdata->vif.cab_queue == queue) @@ -902,7 +908,8 @@ void ieee80211_set_wmm_default(struct ieee80211_sub_if_data *sdata, drv_conf_tx(local, sdata, ac, &qparam); } - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { + if (sdata->vif.type != NL80211_IFTYPE_MONITOR && + sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) { sdata->vif.bss_conf.qos = enable_qos; if (bss_notify) ieee80211_bss_info_change_notify(sdata, @@ -1391,7 +1398,8 @@ int ieee80211_reconfig(struct ieee80211_local *local) /* ignore virtual */ break; case NL80211_IFTYPE_P2P_DEVICE: - /* not yet supported */ + changed = BSS_CHANGED_IDLE; + break; case NL80211_IFTYPE_UNSPECIFIED: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_P2P_CLIENT: @@ -1578,6 +1586,8 @@ void ieee80211_recalc_smps(struct ieee80211_local *local) list_for_each_entry(sdata, &local->interfaces, list) { if (!ieee80211_sdata_running(sdata)) continue; + if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) + continue; if (sdata->vif.type != NL80211_IFTYPE_STATION) goto set; -- cgit v0.10.2 From 6d71117a279aa30574a8af6c7348570c292285c2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 Jun 2012 17:19:44 +0200 Subject: mac80211: add IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF Some devices like the current iwlwifi implementation require that the P2P interface address match the P2P Device address (only one P2P interface is supported.) Add the HW flag IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF that allows drivers to request that P2P Interfaces added while a P2P Device is active get the same MAC address by default. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index edc235c..71f8262 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1241,6 +1241,10 @@ struct ieee80211_tx_control { * queue mapping in order to use different queues (not just one per AC) * for different virtual interfaces. See the doc section on HW queue * control for more details. + * + * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any + * P2P Interface. This will be honoured even if more than one interface + * is supported. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1268,6 +1272,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, + IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, }; /** diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 152aeea..59f8adc 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -1313,7 +1313,6 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, local->hw.wiphy->n_addresses <= 1) return; - mutex_lock(&local->iflist_mtx); switch (type) { @@ -1331,6 +1330,19 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, } /* keep default if no AP interface present */ break; + case NL80211_IFTYPE_P2P_CLIENT: + case NL80211_IFTYPE_P2P_GO: + if (local->hw.flags & IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF) { + list_for_each_entry(sdata, &local->interfaces, list) { + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE) + continue; + if (!ieee80211_sdata_running(sdata)) + continue; + memcpy(perm_addr, sdata->vif.addr, ETH_ALEN); + goto out_unlock; + } + } + /* otherwise fall through */ default: /* assign a new address if possible -- try n_addresses first */ for (i = 0; i < local->hw.wiphy->n_addresses; i++) { @@ -1405,6 +1417,7 @@ static void ieee80211_assign_perm_addr(struct ieee80211_local *local, break; } + out_unlock: mutex_unlock(&local->iflist_mtx); } -- cgit v0.10.2 From 8b3d1cc213f96bfffb5b7808d859b9ad26149e82 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 19 Jun 2012 17:29:29 +0200 Subject: mac80211_hwsim: add support for P2P Device Advertise support for P2P Device in hwsim to be able to test it. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index ed1386a..7bb032e 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -1734,6 +1734,7 @@ static const struct ieee80211_iface_limit hwsim_if_limits[] = { #endif BIT(NL80211_IFTYPE_AP) | BIT(NL80211_IFTYPE_P2P_GO) }, + { .max = 1, .types = BIT(NL80211_IFTYPE_P2P_DEVICE) }, }; static const struct ieee80211_iface_combination hwsim_if_comb = { @@ -1820,7 +1821,8 @@ static int __init init_mac80211_hwsim(void) BIT(NL80211_IFTYPE_P2P_CLIENT) | BIT(NL80211_IFTYPE_P2P_GO) | BIT(NL80211_IFTYPE_ADHOC) | - BIT(NL80211_IFTYPE_MESH_POINT); + BIT(NL80211_IFTYPE_MESH_POINT) | + BIT(NL80211_IFTYPE_P2P_DEVICE); hw->flags = IEEE80211_HW_MFP_CAPABLE | IEEE80211_HW_SIGNAL_DBM | -- cgit v0.10.2 From d348f69f59af769c405c2f43a2d326d7123ef75a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 19 Aug 2012 14:51:44 +0200 Subject: mac80211: simplify buffers in aes_128_cmac_vector There's no need to use a single scratch buffer and calculate offsets into it, just use two separate buffers for the separate variables. Signed-off-by: Johannes Berg diff --git a/net/mac80211/aes_cmac.c b/net/mac80211/aes_cmac.c index 8dfd70d..a04752e 100644 --- a/net/mac80211/aes_cmac.c +++ b/net/mac80211/aes_cmac.c @@ -38,14 +38,10 @@ static void gf_mulx(u8 *pad) static void aes_128_cmac_vector(struct crypto_cipher *tfm, size_t num_elem, const u8 *addr[], const size_t *len, u8 *mac) { - u8 scratch[2 * AES_BLOCK_SIZE]; - u8 *cbc, *pad; + u8 cbc[AES_BLOCK_SIZE], pad[AES_BLOCK_SIZE]; const u8 *pos, *end; size_t i, e, left, total_len; - cbc = scratch; - pad = scratch + AES_BLOCK_SIZE; - memset(cbc, 0, AES_BLOCK_SIZE); total_len = 0; -- cgit v0.10.2 From 466f310d100ff54f346c1be481af9935c42467b3 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 25 Jul 2012 13:51:49 +0200 Subject: mac80211: mesh: don't use global channel type Using local->_oper_channel_type in the mesh code is completely wrong as this value is the combination of the various interface channel types and can be a different value from the mesh interface in case there are multiple virtual interfaces. Use sdata->vif.bss_conf.channel_type instead as it tracks the per-vif channel type. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 035cd0c..f2d0d21 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -109,11 +109,11 @@ bool mesh_matches_local(struct ieee80211_sub_if_data *sdata, /* Disallow HT40+/- mismatch */ if (ie->ht_operation && - (local->_oper_channel_type == NL80211_CHAN_HT40MINUS || - local->_oper_channel_type == NL80211_CHAN_HT40PLUS) && + (sdata->vif.bss_conf.channel_type == NL80211_CHAN_HT40MINUS || + sdata->vif.bss_conf.channel_type == NL80211_CHAN_HT40PLUS) && (sta_channel_type == NL80211_CHAN_HT40MINUS || sta_channel_type == NL80211_CHAN_HT40PLUS) && - local->_oper_channel_type != sta_channel_type) + sdata->vif.bss_conf.channel_type != sta_channel_type) goto mismatch; return true; @@ -375,7 +375,7 @@ int mesh_add_ht_cap_ie(struct sk_buff *skb, sband = local->hw.wiphy->bands[local->oper_channel->band]; if (!sband->ht_cap.ht_supported || - local->_oper_channel_type == NL80211_CHAN_NO_HT) + sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) return 0; if (skb_tailroom(skb) < 2 + sizeof(struct ieee80211_ht_cap)) @@ -392,7 +392,8 @@ int mesh_add_ht_oper_ie(struct sk_buff *skb, { struct ieee80211_local *local = sdata->local; struct ieee80211_channel *channel = local->oper_channel; - enum nl80211_channel_type channel_type = local->_oper_channel_type; + enum nl80211_channel_type channel_type = + sdata->vif.bss_conf.channel_type; struct ieee80211_supported_band *sband = local->hw.wiphy->bands[channel->band]; struct ieee80211_sta_ht_cap *ht_cap = &sband->ht_cap; diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 5fd1250..54ce1af 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -117,7 +117,7 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata) u16 ht_opmode; bool non_ht_sta = false, ht20_sta = false; - if (local->_oper_channel_type == NL80211_CHAN_NO_HT) + if (sdata->vif.bss_conf.channel_type == NL80211_CHAN_NO_HT) return 0; rcu_read_lock(); @@ -147,7 +147,8 @@ out: if (non_ht_sta) ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONHT_MIXED; - else if (ht20_sta && local->_oper_channel_type > NL80211_CHAN_HT20) + else if (ht20_sta && + sdata->vif.bss_conf.channel_type > NL80211_CHAN_HT20) ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_20MHZ; else ht_opmode = IEEE80211_HT_OP_MODE_PROTECTION_NONE; @@ -379,7 +380,7 @@ static struct sta_info *mesh_peer_init(struct ieee80211_sub_if_data *sdata, sta->sta.supp_rates[band] = rates; if (elems->ht_cap_elem && - sdata->local->_oper_channel_type != NL80211_CHAN_NO_HT) + sdata->vif.bss_conf.channel_type != NL80211_CHAN_NO_HT) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, elems->ht_cap_elem, &sta->sta.ht_cap); -- cgit v0.10.2 From e31583cdf0e2eb71c44b1288a2d93405f972da68 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 26 Jul 2012 14:07:46 +0200 Subject: mac80211: remove almost unused local variable In ieee80211_beacon_get_tim() we can use the txrc.sband instead of a separate local variable. Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2d004ba..2d2f45e 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2300,12 +2300,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_sub_if_data *sdata = NULL; struct ieee80211_if_ap *ap = NULL; struct beacon_data *beacon; - struct ieee80211_supported_band *sband; enum ieee80211_band band = local->oper_channel->band; struct ieee80211_tx_rate_control txrc; - sband = local->hw.wiphy->bands[band]; - rcu_read_lock(); sdata = vif_to_sdata(vif); @@ -2452,12 +2449,12 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, memset(&txrc, 0, sizeof(txrc)); txrc.hw = hw; - txrc.sband = sband; + txrc.sband = local->hw.wiphy->bands[band]; txrc.bss_conf = &sdata->vif.bss_conf; txrc.skb = skb; txrc.reported_rate.idx = -1; txrc.rate_idx_mask = sdata->rc_rateidx_mask[band]; - if (txrc.rate_idx_mask == (1 << sband->n_bitrates) - 1) + if (txrc.rate_idx_mask == (1 << txrc.sband->n_bitrates) - 1) txrc.max_rate_idx = -1; else txrc.max_rate_idx = fls(txrc.rate_idx_mask) - 1; -- cgit v0.10.2 From 9e99a127b5724d7a2cd9d2973b10981d56e1d647 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 26 Jul 2012 14:22:06 +0200 Subject: mac80211: remove freq/chantype from debugfs You can now get these values through iw, and they conflict with multi-channel work. Signed-off-by: Johannes Berg diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index b8dfb44..97173f8 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -63,8 +63,6 @@ DEBUGFS_READONLY_FILE(user_power, "%d", local->user_power_level); DEBUGFS_READONLY_FILE(power, "%d", local->hw.conf.power_level); -DEBUGFS_READONLY_FILE(frequency, "%d", - local->hw.conf.channel->center_freq); DEBUGFS_READONLY_FILE(total_ps_buffered, "%d", local->total_ps_buffered); DEBUGFS_READONLY_FILE(wep_iv, "%#08x", @@ -91,33 +89,6 @@ static const struct file_operations reset_ops = { .llseek = noop_llseek, }; -static ssize_t channel_type_read(struct file *file, char __user *user_buf, - size_t count, loff_t *ppos) -{ - struct ieee80211_local *local = file->private_data; - const char *buf; - - switch (local->hw.conf.channel_type) { - case NL80211_CHAN_NO_HT: - buf = "no ht\n"; - break; - case NL80211_CHAN_HT20: - buf = "ht20\n"; - break; - case NL80211_CHAN_HT40MINUS: - buf = "ht40-\n"; - break; - case NL80211_CHAN_HT40PLUS: - buf = "ht40+\n"; - break; - default: - buf = "???"; - break; - } - - return simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf)); -} - static ssize_t hwflags_read(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { @@ -205,7 +176,6 @@ static ssize_t queues_read(struct file *file, char __user *user_buf, } DEBUGFS_READONLY_FILE_OPS(hwflags); -DEBUGFS_READONLY_FILE_OPS(channel_type); DEBUGFS_READONLY_FILE_OPS(queues); /* statistics stuff */ @@ -272,12 +242,10 @@ void debugfs_hw_add(struct ieee80211_local *local) local->debugfs.keys = debugfs_create_dir("keys", phyd); - DEBUGFS_ADD(frequency); DEBUGFS_ADD(total_ps_buffered); DEBUGFS_ADD(wep_iv); DEBUGFS_ADD(queues); DEBUGFS_ADD_MODE(reset, 0200); - DEBUGFS_ADD(channel_type); DEBUGFS_ADD(hwflags); DEBUGFS_ADD(user_power); DEBUGFS_ADD(power); -- cgit v0.10.2 From f9e6e95b63758202fe2ce43bd7c922db2ff50f80 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 23 Jul 2012 14:29:21 +0200 Subject: mac80211: use oper_channel in rate init Using hw.conf.channel is wrong as it could be the temporary channel if the station is added from the workqueue while the device is already on another channel. Use oper_channel instead. Signed-off-by: Johannes Berg diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index 6e4fd32..10de668 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -56,7 +56,7 @@ static inline void rate_control_rate_init(struct sta_info *sta) if (!ref) return; - sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; + sband = local->hw.wiphy->bands[local->oper_channel->band]; ref->ops->rate_init(ref->priv, sband, ista, priv_sta); set_sta_flag(sta, WLAN_STA_RATE_CONTROL); -- cgit v0.10.2 From 3d01be72e6fe372a0602221090707a1f04c44646 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 26 Jul 2012 14:27:39 +0200 Subject: mac80211: don't assume channel is set in tracing With the move to multi-channel and away from drv_config(), hw.conf.channel will not always be set, only for devices using the current API instead of the new channel context APIs. Check the channel is set before adding its frequency to the trace data. Also break some overly long lines in the code. Signed-off-by: Johannes Berg diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 65e9a2a..18d9c8a 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -274,9 +274,12 @@ TRACE_EVENT(drv_config, __entry->dynamic_ps_timeout = local->hw.conf.dynamic_ps_timeout; __entry->max_sleep_period = local->hw.conf.max_sleep_period; __entry->listen_interval = local->hw.conf.listen_interval; - __entry->long_frame_max_tx_count = local->hw.conf.long_frame_max_tx_count; - __entry->short_frame_max_tx_count = local->hw.conf.short_frame_max_tx_count; - __entry->center_freq = local->hw.conf.channel->center_freq; + __entry->long_frame_max_tx_count = + local->hw.conf.long_frame_max_tx_count; + __entry->short_frame_max_tx_count = + local->hw.conf.short_frame_max_tx_count; + __entry->center_freq = local->hw.conf.channel ? + local->hw.conf.channel->center_freq : 0; __entry->channel_type = local->hw.conf.channel_type; __entry->smps = local->hw.conf.smps_mode; ), -- cgit v0.10.2 From 4797c7ba93e4049cdda18045c01bbe563aafff69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 26 Jul 2012 14:31:19 +0200 Subject: mac80211: use RX status band instead of current band Even for single-channel devices it is possible that we switch the channel temporarily (e.g. for scanning) but while doing so process a received frame that was still received on the old channel, so checking the current band is racy. Use the band from status instead. Signed-off-by: Johannes Berg diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index f5258eb..b382605 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2308,7 +2308,7 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) goto queue; case WLAN_CATEGORY_SPECTRUM_MGMT: - if (local->hw.conf.channel->band != IEEE80211_BAND_5GHZ) + if (status->band != IEEE80211_BAND_5GHZ) break; if (sdata->vif.type != NL80211_IFTYPE_STATION) -- cgit v0.10.2 From 9b8648704358e42f9865cd6de7cedb5ac0db67e7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 26 Jul 2012 14:38:32 +0200 Subject: mac80211: check operating channel in scan The optimisation of scanning only on the current channel should check the operating channel. Also modify it to compare channel pointer rather than the frequency. Signed-off-by: Johannes Berg diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index bcaee5d..4b75dde 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -479,11 +479,10 @@ static int __ieee80211_start_scan(struct ieee80211_sub_if_data *sdata, if (local->ops->hw_scan) { __set_bit(SCAN_HW_SCANNING, &local->scanning); } else if ((req->n_channels == 1) && - (req->channels[0]->center_freq == - local->hw.conf.channel->center_freq)) { - - /* If we are scanning only on the current channel, then - * we do not need to stop normal activities + (req->channels[0] == local->oper_channel)) { + /* + * If we are scanning only on the operating channel + * then we do not need to stop normal activities */ unsigned long next_delay; -- cgit v0.10.2 From c0af07340aae5db9f976bfe71e2e9bcab3169409 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 26 Jul 2012 14:42:10 +0200 Subject: mac80211: convert ops checks to WARN_ON There's no need to BUG_ON when a driver registers invalid operations, warn and return an error. Signed-off-by: Johannes Berg diff --git a/net/mac80211/main.c b/net/mac80211/main.c index e706f9e..bd75293 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -545,6 +545,11 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, int priv_size, i; struct wiphy *wiphy; + if (WARN_ON(!ops->tx || !ops->start || !ops->stop || !ops->config || + !ops->add_interface || !ops->remove_interface || + !ops->configure_filter)) + return NULL; + if (WARN_ON(ops->sta_state && (ops->sta_add || ops->sta_remove))) return NULL; @@ -597,13 +602,6 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->hw.priv = (char *)local + ALIGN(sizeof(*local), NETDEV_ALIGN); - BUG_ON(!ops->tx); - BUG_ON(!ops->start); - BUG_ON(!ops->stop); - BUG_ON(!ops->config); - BUG_ON(!ops->add_interface); - BUG_ON(!ops->remove_interface); - BUG_ON(!ops->configure_filter); local->ops = ops; /* set up some defaults */ -- cgit v0.10.2 From fe94fe05e9fb7c1bea482d1b0fd09029a711cce2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Jul 2012 12:26:34 +0200 Subject: mac80211: pass channel to ieee80211_send_probe_req In multi-channel scenarios, the channel that we will transmit a probe request on isn't always the current channel (which will be NULL anyway) but will instead be the channel that the AP is on. Pass the channel to the ieee80211_send_probe_req() function so it can be used in the different scenarios. The scan code continues to pass the current channel, of course. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 0b81fa8..204bfed 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1472,7 +1472,8 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, - u32 ratemask, bool directed, bool no_cck); + u32 ratemask, bool directed, bool no_cck, + struct ieee80211_channel *channel); void ieee80211_sta_def_wmm_params(struct ieee80211_sub_if_data *sdata, const size_t supp_rates_len, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ddb2db5..b65b214 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1577,7 +1577,8 @@ static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) ssid_len = ssid[1]; ieee80211_send_probe_req(sdata, dst, ssid + 2, ssid_len, NULL, - 0, (u32) -1, true, false); + 0, (u32) -1, true, false, + ifmgd->associated->channel); } ifmgd->probe_timeout = jiffies + msecs_to_jiffies(probe_wait_ms); @@ -2704,7 +2705,8 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) * will not answer to direct packet in unassociated state. */ ieee80211_send_probe_req(sdata, NULL, ssidie + 2, ssidie[1], - NULL, 0, (u32) -1, true, false); + NULL, 0, (u32) -1, true, false, + auth_data->bss->channel); } auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 4b75dde..ef1d693 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -416,7 +416,8 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - local->scan_req->no_cck); + local->scan_req->no_cck, + local->hw.conf.channel); /* * After sending probe requests, wait for probe responses diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 79bce87..471fb05 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1163,12 +1163,12 @@ struct sk_buff *ieee80211_build_probe_req(struct ieee80211_sub_if_data *sdata, void ieee80211_send_probe_req(struct ieee80211_sub_if_data *sdata, u8 *dst, const u8 *ssid, size_t ssid_len, const u8 *ie, size_t ie_len, - u32 ratemask, bool directed, bool no_cck) + u32 ratemask, bool directed, bool no_cck, + struct ieee80211_channel *channel) { struct sk_buff *skb; - skb = ieee80211_build_probe_req(sdata, dst, ratemask, - sdata->local->hw.conf.channel, + skb = ieee80211_build_probe_req(sdata, dst, ratemask, channel, ssid, ssid_len, ie, ie_len, directed); if (skb) { -- cgit v0.10.2 From dcf33963c48e1959c83fda84e336dbb000eefa3f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Jul 2012 15:11:56 +0200 Subject: mac80211: clean up ieee80211_subif_start_xmit There's no need to carry around a return value that is always NETDEV_TX_OK anyway. Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2d2f45e..3b807bc 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1719,7 +1719,7 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); struct ieee80211_local *local = sdata->local; struct ieee80211_tx_info *info; - int ret = NETDEV_TX_BUSY, head_need; + int head_need; u16 ethertype, hdrlen, meshhdrlen = 0; __le16 fc; struct ieee80211_hdr hdr; @@ -1735,10 +1735,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, u32 info_flags = 0; u16 info_id = 0; - if (unlikely(skb->len < ETH_HLEN)) { - ret = NETDEV_TX_OK; + if (unlikely(skb->len < ETH_HLEN)) goto fail; - } /* convert Ethernet header to proper 802.11 header (based on * operation mode) */ @@ -1786,7 +1784,6 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, if (!sdata->u.mesh.mshcfg.dot11MeshTTL) { /* Do not send frames with mesh_ttl == 0 */ sdata->u.mesh.mshstats.dropped_frames_ttl++; - ret = NETDEV_TX_OK; goto fail; } rcu_read_lock(); @@ -1879,10 +1876,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, if (tdls_direct) { /* link during setup - throw out frames to peer */ - if (!tdls_auth) { - ret = NETDEV_TX_OK; + if (!tdls_auth) goto fail; - } /* DA SA BSSID */ memcpy(hdr.addr1, skb->data, ETH_ALEN); @@ -1916,7 +1911,6 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, hdrlen = 24; break; default: - ret = NETDEV_TX_OK; goto fail; } @@ -1961,7 +1955,6 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, I802_DEBUG_INC(local->tx_handlers_drop_unauth_port); - ret = NETDEV_TX_OK; goto fail; } @@ -2016,10 +2009,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, skb = skb_clone(skb, GFP_ATOMIC); kfree_skb(tmp_skb); - if (!skb) { - ret = NETDEV_TX_OK; + if (!skb) goto fail; - } } hdr.frame_control = fc; @@ -2122,10 +2113,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb, return NETDEV_TX_OK; fail: - if (ret == NETDEV_TX_OK) - dev_kfree_skb(skb); - - return ret; + dev_kfree_skb(skb); + return NETDEV_TX_OK; } -- cgit v0.10.2