From 71fc9fcc70e6ad96215510c1dbcbade05cd95e41 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 2 Sep 2008 20:18:46 +0200 Subject: IDE: compile fix for sff_dma_ops The sff_dma_ops struct should be wrapped by BLK_DEV_IDEDMA_SFF instead of BLK_DEV_IDEDMA_PCI. Signed-off-by: Kevin Hilman Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/include/linux/ide.h b/include/linux/ide.h index 87c12ed..fee4b15 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1111,7 +1111,6 @@ void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); #ifdef CONFIG_BLK_DEV_IDEDMA_PCI int ide_pci_set_master(struct pci_dev *, const char *); unsigned long ide_pci_dma_base(ide_hwif_t *, const struct ide_port_info *); -extern const struct ide_dma_ops sff_dma_ops; int ide_pci_check_simplex(ide_hwif_t *, const struct ide_port_info *); int ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); #else @@ -1275,6 +1274,7 @@ extern int __ide_dma_end(ide_drive_t *); int ide_dma_test_irq(ide_drive_t *); extern void ide_dma_lost_irq(ide_drive_t *); extern void ide_dma_timeout(ide_drive_t *); +extern const struct ide_dma_ops sff_dma_ops; #endif /* CONFIG_BLK_DEV_IDEDMA_SFF */ #else -- cgit v0.10.2 From a1aee8622293138867e7dbd1dd214dfb34cd89d2 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: IDE: palm_bk3710: fix compile warning for unused variable Signed-off-by: Kevin Hilman Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index f788fa5..581a7d1 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -347,7 +347,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; - struct ide_host *host; unsigned long base, rate; int i, rc; hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; -- cgit v0.10.2 From 96f80219b738f84f90e449385bdede90f2910521 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: ide: fix hwif_to_node() hwif_to_node() incorrectly assumes that hwif->dev always belongs to a PCI device. This results in ide-cs oopsing in init_irq() after commit c56c5648a3bd15ff14c50f284b261140cd5b5472 accidentally fixed device tree registration for ide-cs. Fix it by using dev_to_node(). Thanks to Martin Michlmayr and Larry Finger for help with debugging the issue. Reported-by: Martin Michlmayr Tested-by: Martin Michlmayr Cc: Larry Finger Cc: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/include/linux/ide.h b/include/linux/ide.h index fee4b15..1524829 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -1448,8 +1448,7 @@ static inline void ide_dump_identify(u8 *id) static inline int hwif_to_node(ide_hwif_t *hwif) { - struct pci_dev *dev = to_pci_dev(hwif->dev); - return hwif->dev ? pcibus_to_node(dev->bus) : -1; + return hwif->dev ? dev_to_node(hwif->dev) : -1; } static inline ide_drive_t *ide_get_paired_drive(ide_drive_t *drive) -- cgit v0.10.2 From bfc2f01fc83f982344f09f491f7c18a6b9a16aa8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: palm_bk3710: improve IDE registration * fix device tree ... don't forget to set the parent device * let init/exit code be removed where practical Signed-off-by: David Brownell [bart: splitted it from bigger DaVinci patch, s/hw.parent/hw.dev/] Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 581a7d1..4fd91dc 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -343,7 +343,7 @@ static struct ide_port_info __devinitdata palm_bk3710_port_info = { .mwdma_mask = ATA_MWDMA2, }; -static int __devinit palm_bk3710_probe(struct platform_device *pdev) +static int __init palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; @@ -389,6 +389,7 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; hw.irq = irq->start; + hw.dev = &pdev->dev; hw.chipset = ide_palm3710; palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 : @@ -412,13 +413,11 @@ static struct platform_driver platform_bk_driver = { .name = "palm_bk3710", .owner = THIS_MODULE, }, - .probe = palm_bk3710_probe, - .remove = NULL, }; static int __init palm_bk3710_init(void) { - return platform_driver_register(&platform_bk_driver); + return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe); } module_init(palm_bk3710_init); -- cgit v0.10.2 From ab1b67a6230648cf65b0342d9887fee890160ca8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Sep 2008 20:18:47 +0200 Subject: ide-disk: remove stale init_idedisk_capacity() documentation Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c index 68b9cf0..07ef88b 100644 --- a/drivers/ide/ide-disk.c +++ b/drivers/ide/ide-disk.c @@ -445,20 +445,6 @@ static void idedisk_check_hpa(ide_drive_t *drive) } } -/* - * Compute drive->capacity, the full capacity of the drive - * Called with drive->id != NULL. - * - * To compute capacity, this uses either of - * - * 1. CHS value set by user (whatever user sets will be trusted) - * 2. LBA value from target drive (require new ATA feature) - * 3. LBA value from system BIOS (new one is OK, old one may break) - * 4. CHS value from system BIOS (traditional style) - * - * in above order (i.e., if value of higher priority is available, - * reset will be ignored). - */ static void init_idedisk_capacity(ide_drive_t *drive) { struct hd_driveid *id = drive->id; -- cgit v0.10.2 From 5a61dd9ec8c5a8e14fbccda3ab042555b692b9b2 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 2 Sep 2008 20:18:48 +0200 Subject: ide/Kconfig: mark ide-scsi as deprecated Mark ide-scsi as deprecated and remove stale/bogus documentation. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index a34758d..fc735ab 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -242,7 +242,7 @@ config BLK_DEV_IDEFLOPPY module will be called ide-floppy. config BLK_DEV_IDESCSI - tristate "SCSI emulation support" + tristate "SCSI emulation support (DEPRECATED)" depends on SCSI select IDE_ATAPI ---help--- @@ -255,20 +255,6 @@ config BLK_DEV_IDESCSI and will allow you to use a SCSI device driver instead of a native ATAPI driver. - This is useful if you have an ATAPI device for which no native - driver has been written (for example, an ATAPI PD-CD drive); - you can then use this emulation together with an appropriate SCSI - device driver. In order to do this, say Y here and to "SCSI support" - and "SCSI generic support", below. You must then provide the kernel - command line "hdx=ide-scsi" (try "man bootparam" or see the - documentation of your boot loader (lilo or loadlin) about how to - pass options to the kernel at boot time) for devices if you want the - native EIDE sub-drivers to skip over the native support, so that - this SCSI emulation can be used instead. - - Note that this option does NOT allow you to attach SCSI devices to a - box that doesn't have a SCSI host adapter installed. - If both this SCSI emulation and native ATAPI support are compiled into the kernel, the native support will be used. -- cgit v0.10.2