From f566a576bca09de85bf477fc0ab2c8c96405b77b Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 2 Oct 2005 17:15:29 -0700 Subject: [SCSI] NCR5380: fix undefined preprocessor identifier Fix 12 undefined preprocessor identifier warnings (4 each in 3 driver builds): drivers/scsi/NCR5380.c:2744:16: warning: undefined preprocessor identifier 'NDEBUG_ABORT' drivers/scsi/NCR5380.c:2744:16: warning: "NDEBUG_ABORT" is not defined Signed-off-by: Randy Dunlap Signed-off-by: James Bottomley diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c index d40ba0b..23392ae 100644 --- a/drivers/scsi/NCR5380.c +++ b/drivers/scsi/NCR5380.c @@ -91,7 +91,7 @@ #ifndef NDEBUG #define NDEBUG 0 #endif -#ifndef NDEBUG +#ifndef NDEBUG_ABORT #define NDEBUG_ABORT 0 #endif -- cgit v0.10.2 From 7a9366e46c167930f8bd9e378a3656861c5a41b6 Mon Sep 17 00:00:00 2001 From: "Salyzyn, Mark" Date: Wed, 5 Oct 2005 12:58:38 -0400 Subject: [SCSI] Fix aacraid regression Juan was kind enough to linger on site, and work on a production machine, to try the parameter to make the system stable. He discovered that reducing the maximum transfer size issued to the adapter to 128KB stabilized his system. This is related to an earlier change for the 2.6.13 tree resulting from Martin Drab's testing where the transfer size was reduced from 4G to 256KB; we needed to go still further in scaling back the request size. Here is the patch that tames this regression. Signed-off-by: Mark Salyzyn Signed-off-by: James Bottomley diff --git a/drivers/scsi/aacraid/aacraid.h b/drivers/scsi/aacraid/aacraid.h index 4a99d2f..d54b1cc 100644 --- a/drivers/scsi/aacraid/aacraid.h +++ b/drivers/scsi/aacraid/aacraid.h @@ -19,7 +19,7 @@ #define AAC_MAX_LUN (8) #define AAC_MAX_HOSTPHYSMEMPAGES (0xfffff) -#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)512) +#define AAC_MAX_32BIT_SGBCOUNT ((unsigned short)256) /* * These macros convert from physical channels to virtual channels -- cgit v0.10.2 From d16794f6ac8d9b50f62e02a6e6175ae1a30d0ccd Mon Sep 17 00:00:00 2001 From: "James.Smart@Emulex.Com" Date: Wed, 5 Oct 2005 13:50:08 -0400 Subject: [SCSI] FW: [PATCH] for Deadlock in transport_fc Cannot call fc_rport_terminate() under the host lock, so drop the lock. Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_transport_fc.c b/drivers/scsi/scsi_transport_fc.c index 2cab556..771e97e 100644 --- a/drivers/scsi/scsi_transport_fc.c +++ b/drivers/scsi/scsi_transport_fc.c @@ -819,12 +819,15 @@ show_fc_private_host_tgtid_bind_type(struct class_device *cdev, char *buf) return snprintf(buf, FC_BINDTYPE_MAX_NAMELEN, "%s\n", name); } +#define get_list_head_entry(pos, head, member) \ + pos = list_entry((head)->next, typeof(*pos), member) + static ssize_t store_fc_private_host_tgtid_bind_type(struct class_device *cdev, const char *buf, size_t count) { struct Scsi_Host *shost = transport_class_to_shost(cdev); - struct fc_rport *rport, *next_rport; + struct fc_rport *rport; enum fc_tgtid_binding_type val; unsigned long flags; @@ -834,9 +837,13 @@ store_fc_private_host_tgtid_bind_type(struct class_device *cdev, /* if changing bind type, purge all unused consistent bindings */ if (val != fc_host_tgtid_bind_type(shost)) { spin_lock_irqsave(shost->host_lock, flags); - list_for_each_entry_safe(rport, next_rport, - &fc_host_rport_bindings(shost), peers) + while (!list_empty(&fc_host_rport_bindings(shost))) { + get_list_head_entry(rport, + &fc_host_rport_bindings(shost), peers); + spin_unlock_irqrestore(shost->host_lock, flags); fc_rport_terminate(rport); + spin_lock_irqsave(shost->host_lock, flags); + } spin_unlock_irqrestore(shost->host_lock, flags); } -- cgit v0.10.2 From 7c72ce81870ded9365f4bc5caa98ef1591dd18dd Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 14 Oct 2005 11:23:27 -0400 Subject: [SCSI] Fix leak of Scsi_Cmnds When a request is deferred in scsi_init_io because the sg table could not be allocated, the associated scsi_cmnd is not released and the request is not marked with REQ_DONTPREP. When the command is retried, if scsi_prep_fn decides to kill it then the scsi_cmnd will never be released. This patch (as573) changes scsi_init_io so that it calls scsi_put_command before deferring a request. Signed-off-by: Alan Stern Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c index dc9c772..0074f28 100644 --- a/drivers/scsi/scsi_lib.c +++ b/drivers/scsi/scsi_lib.c @@ -97,7 +97,6 @@ int scsi_insert_special_req(struct scsi_request *sreq, int at_head) } static void scsi_run_queue(struct request_queue *q); -static void scsi_release_buffers(struct scsi_cmnd *cmd); /* * Function: scsi_unprep_request() @@ -1040,8 +1039,10 @@ static int scsi_init_io(struct scsi_cmnd *cmd) * if sg table allocation fails, requeue request later. */ sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC); - if (unlikely(!sgpnt)) + if (unlikely(!sgpnt)) { + scsi_unprep_request(req); return BLKPREP_DEFER; + } cmd->request_buffer = (char *) sgpnt; cmd->request_bufflen = req->nr_sectors << 9; @@ -1245,8 +1246,8 @@ static int scsi_prep_fn(struct request_queue *q, struct request *req) */ ret = scsi_init_io(cmd); switch(ret) { + /* For BLKPREP_KILL/DEFER the cmd was released */ case BLKPREP_KILL: - /* BLKPREP_KILL return also releases the command */ goto kill; case BLKPREP_DEFER: goto defer; -- cgit v0.10.2 From f4fd20bf31376f29e4edde6596e3972198877309 Mon Sep 17 00:00:00 2001 From: Karl Magnus Kolstoe Date: Mon, 17 Oct 2005 10:05:42 +0200 Subject: [SCSI] 2.6.13.3; add Pioneer DRM-624x to drivers/scsi/scsi_devinfo.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The patch below should make the Pioneer DRM-624X automatically be set up with all 6 "drives". (6 slot SCSI CD changer) Signed-off-by: Karl Magnus Kolstø Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c index 64fc9e2..e69477d 100644 --- a/drivers/scsi/scsi_devinfo.c +++ b/drivers/scsi/scsi_devinfo.c @@ -185,6 +185,7 @@ static struct { {"PIONEER", "CD-ROM DRM-600", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-602X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"PIONEER", "CD-ROM DRM-604X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, + {"PIONEER", "CD-ROM DRM-624X", NULL, BLIST_FORCELUN | BLIST_SINGLELUN}, {"REGAL", "CDC-4X", NULL, BLIST_MAX5LUN | BLIST_SINGLELUN}, {"SanDisk", "ImageMate CF-SD1", NULL, BLIST_FORCELUN}, {"SEAGATE", "ST34555N", "0930", BLIST_NOTQ}, /* Chokes on tagged INQUIRY */ -- cgit v0.10.2 From 16192896ea8e03d18d4228023500607b00df49e6 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 17 Oct 2005 15:40:52 +0200 Subject: [SCSI] mptsas: fix phy identifiers This patch from Eric fixes handling of the phy identifiers in mptsas. I've split it up from his bigger patch as it should go into 2.6.14 still. Signed-off-by: Eric Moore Signed-off-by: Christoph Hellwig Signed-off-by: James Bottomley diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 429820e..7de19a8 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -257,8 +257,8 @@ static void mptsas_print_device_pg0(SasDevicePage0_t *pg0) printk("SAS Address=0x%llX\n", le64_to_cpu(sas_address)); printk("Target ID=0x%X\n", pg0->TargetID); printk("Bus=0x%X\n", pg0->Bus); - printk("PhyNum=0x%X\n", pg0->PhyNum); - printk("AccessStatus=0x%X\n", le16_to_cpu(pg0->AccessStatus)); + printk("Parent Phy Num=0x%X\n", pg0->PhyNum); + printk("Access Status=0x%X\n", le16_to_cpu(pg0->AccessStatus)); printk("Device Info=0x%X\n", le32_to_cpu(pg0->DeviceInfo)); printk("Flags=0x%X\n", le16_to_cpu(pg0->Flags)); printk("Physical Port=0x%X\n", pg0->PhysicalPort); @@ -270,7 +270,7 @@ static void mptsas_print_expander_pg1(SasExpanderPage1_t *pg1) printk("---- SAS EXPANDER PAGE 1 ------------\n"); printk("Physical Port=0x%X\n", pg1->PhysicalPort); - printk("PHY Identifier=0x%X\n", pg1->Phy); + printk("PHY Identifier=0x%X\n", pg1->PhyIdentifier); printk("Negotiated Link Rate=0x%X\n", pg1->NegotiatedLinkRate); printk("Programmed Link Rate=0x%X\n", pg1->ProgrammedLinkRate); printk("Hardware Link Rate=0x%X\n", pg1->HwLinkRate); @@ -604,7 +604,7 @@ mptsas_sas_expander_pg1(MPT_ADAPTER *ioc, struct mptsas_phyinfo *phy_info, mptsas_print_expander_pg1(buffer); /* save config data */ - phy_info->phy_id = buffer->Phy; + phy_info->phy_id = buffer->PhyIdentifier; phy_info->port_id = buffer->PhysicalPort; phy_info->negotiated_link_rate = buffer->NegotiatedLinkRate; phy_info->programmed_link_rate = buffer->ProgrammedLinkRate; @@ -825,6 +825,8 @@ mptsas_probe_hba_phys(MPT_ADAPTER *ioc, int *index) mptsas_sas_device_pg0(ioc, &port_info->phy_info[i].identify, (MPI_SAS_DEVICE_PGAD_FORM_GET_NEXT_HANDLE << MPI_SAS_DEVICE_PGAD_FORM_SHIFT), handle); + port_info->phy_info[i].identify.phy_id = + port_info->phy_info[i].phy_id; handle = port_info->phy_info[i].identify.handle; if (port_info->phy_info[i].attached.handle) { @@ -881,6 +883,8 @@ mptsas_probe_expander_phys(MPT_ADAPTER *ioc, u32 *handle, int *index) (MPI_SAS_DEVICE_PGAD_FORM_HANDLE << MPI_SAS_DEVICE_PGAD_FORM_SHIFT), port_info->phy_info[i].identify.handle); + port_info->phy_info[i].identify.phy_id = + port_info->phy_info[i].phy_id; } if (port_info->phy_info[i].attached.handle) { -- cgit v0.10.2 From 055787e447a6cf50aa1cc42f7d3b07f08223dd9b Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Wed, 19 Oct 2005 08:22:13 -0400 Subject: [SCSI] scsi_error thread exits in TASK_INTERRUPTIBLE state. Found in the -rt patch set. The scsi_error thread likely will be in the TASK_INTERRUPTIBLE state upon exit. This patch fixes this bug. Signed-off-by: Steven Rostedt Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c index ad53421..52b348c 100644 --- a/drivers/scsi/scsi_error.c +++ b/drivers/scsi/scsi_error.c @@ -1645,6 +1645,8 @@ int scsi_error_handler(void *data) set_current_state(TASK_INTERRUPTIBLE); } + __set_current_state(TASK_RUNNING); + SCSI_LOG_ERROR_RECOVERY(1, printk("Error handler scsi_eh_%d" " exiting\n",shost->host_no)); -- cgit v0.10.2 From c98d80edc827277c28f88d662a7d6e9affa7e12f Mon Sep 17 00:00:00 2001 From: Julian Anastasov Date: Sat, 22 Oct 2005 13:39:21 +0300 Subject: [SK_BUFF]: ipvs_property field must be copied IPVS used flag NFC_IPVS_PROPERTY in nfcache but as now nfcache was removed the new flag 'ipvs_property' still needs to be copied. This patch should be included in 2.6.14. Further comments from Harald Welte: Sorry, seems like the bug was introduced by me. Signed-off-by: Julian Anastasov Signed-off-by: Harald Welte Signed-off-by: Arnaldo Carvalho de Melo diff --git a/net/core/skbuff.c b/net/core/skbuff.c index af9b151..02cd4cd 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -410,6 +410,9 @@ struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask) C(nfct); nf_conntrack_get(skb->nfct); C(nfctinfo); +#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE) + C(ipvs_property); +#endif #ifdef CONFIG_BRIDGE_NETFILTER C(nf_bridge); nf_bridge_get(skb->nf_bridge); @@ -467,6 +470,9 @@ static void copy_skb_header(struct sk_buff *new, const struct sk_buff *old) new->nfct = old->nfct; nf_conntrack_get(old->nfct); new->nfctinfo = old->nfctinfo; +#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE) + new->ipvs_property = old->ipvs_property; +#endif #ifdef CONFIG_BRIDGE_NETFILTER new->nf_bridge = old->nf_bridge; nf_bridge_get(old->nf_bridge); diff --git a/net/ipv4/ip_output.c b/net/ipv4/ip_output.c index 3f1a263..1ad5202 100644 --- a/net/ipv4/ip_output.c +++ b/net/ipv4/ip_output.c @@ -391,6 +391,9 @@ static void ip_copy_metadata(struct sk_buff *to, struct sk_buff *from) to->nfct = from->nfct; nf_conntrack_get(to->nfct); to->nfctinfo = from->nfctinfo; +#if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE) + to->ipvs_property = from->ipvs_property; +#endif #ifdef CONFIG_BRIDGE_NETFILTER nf_bridge_put(to->nf_bridge); to->nf_bridge = from->nf_bridge; -- cgit v0.10.2 From 4595f251058609d97a5d792de08c34a7956af816 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 14 Oct 2005 21:29:56 +0100 Subject: [AX.25]: Fix signed char bug On architectures where the char type defaults to unsigned some of the arithmetic in the AX.25 stack to fail, resulting in some packets being dropped on receive. Credits for tracking this down and the original patch to Bob Brose N0QBJ . Signed-off-by: Ralf Baechle DL5RB Signed-off-by: Arnaldo Carvalho de Melo diff --git a/include/net/ax25.h b/include/net/ax25.h index 9dbcd9e..30bb4a8 100644 --- a/include/net/ax25.h +++ b/include/net/ax25.h @@ -171,7 +171,7 @@ typedef struct { ax25_address calls[AX25_MAX_DIGIS]; unsigned char repeated[AX25_MAX_DIGIS]; unsigned char ndigi; - char lastrepeat; + signed char lastrepeat; } ax25_digi; typedef struct ax25_route { -- cgit v0.10.2 From d475f3f47a0427dfee483cecf9a7e9109e991423 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Fri, 21 Oct 2005 22:06:15 +0400 Subject: [PATCH] alpha: additional smp barriers As stated in Documentation/atomic_ops.txt, atomic functions returning values must have the memory barriers both before and after the operation. Thanks to DaveM for pointing that out. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/include/asm-alpha/atomic.h b/include/asm-alpha/atomic.h index 1b383e3..0b40bad 100644 --- a/include/asm-alpha/atomic.h +++ b/include/asm-alpha/atomic.h @@ -100,18 +100,19 @@ static __inline__ void atomic64_sub(long i, atomic64_t * v) static __inline__ long atomic_add_return(int i, atomic_t * v) { long temp, result; + smp_mb(); __asm__ __volatile__( "1: ldl_l %0,%1\n" " addl %0,%3,%2\n" " addl %0,%3,%0\n" " stl_c %0,%1\n" " beq %0,2f\n" - " mb\n" ".subsection 2\n" "2: br 1b\n" ".previous" :"=&r" (temp), "=m" (v->counter), "=&r" (result) :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); return result; } @@ -120,54 +121,57 @@ static __inline__ long atomic_add_return(int i, atomic_t * v) static __inline__ long atomic64_add_return(long i, atomic64_t * v) { long temp, result; + smp_mb(); __asm__ __volatile__( "1: ldq_l %0,%1\n" " addq %0,%3,%2\n" " addq %0,%3,%0\n" " stq_c %0,%1\n" " beq %0,2f\n" - " mb\n" ".subsection 2\n" "2: br 1b\n" ".previous" :"=&r" (temp), "=m" (v->counter), "=&r" (result) :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); return result; } static __inline__ long atomic_sub_return(int i, atomic_t * v) { long temp, result; + smp_mb(); __asm__ __volatile__( "1: ldl_l %0,%1\n" " subl %0,%3,%2\n" " subl %0,%3,%0\n" " stl_c %0,%1\n" " beq %0,2f\n" - " mb\n" ".subsection 2\n" "2: br 1b\n" ".previous" :"=&r" (temp), "=m" (v->counter), "=&r" (result) :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); return result; } static __inline__ long atomic64_sub_return(long i, atomic64_t * v) { long temp, result; + smp_mb(); __asm__ __volatile__( "1: ldq_l %0,%1\n" " subq %0,%3,%2\n" " subq %0,%3,%0\n" " stq_c %0,%1\n" " beq %0,2f\n" - " mb\n" ".subsection 2\n" "2: br 1b\n" ".previous" :"=&r" (temp), "=m" (v->counter), "=&r" (result) :"Ir" (i), "m" (v->counter) : "memory"); + smp_mb(); return result; } -- cgit v0.10.2 From 203755029e063066ecc4cf5eee1110ab946c2d88 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 23 Oct 2005 16:11:39 +1000 Subject: [NEIGH] Print stack trace in neigh_add_timer Stack traces are very helpful in determining the exact nature of a bug. So let's print a stack trace when the timer is added twice. Signed-off-by: Herbert Xu diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 4128fc7..766caa0 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -732,6 +732,7 @@ static inline void neigh_add_timer(struct neighbour *n, unsigned long when) if (unlikely(mod_timer(&n->timer, when))) { printk("NEIGH: BUG, double timer add, state is %x\n", n->nud_state); + dump_stack(); } } -- cgit v0.10.2 From 6fb9974f49f7a6032118c5b6caa6e08e7097913e Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 23 Oct 2005 16:37:48 +1000 Subject: [NEIGH] Fix add_timer race in neigh_add_timer neigh_add_timer cannot use add_timer unconditionally. The reason is that by the time it has obtained the write lock someone else (e.g., neigh_update) could have already added a new timer. So it should only use mod_timer and deal with its return value accordingly. This bug would have led to rare neighbour cache entry leaks. Signed-off-by: Herbert Xu diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 766caa0..37d8d8c 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -816,10 +816,10 @@ static void neigh_timer_handler(unsigned long arg) } if (neigh->nud_state & NUD_IN_TIMER) { - neigh_hold(neigh); if (time_before(next, jiffies + HZ/2)) next = jiffies + HZ/2; - neigh_add_timer(neigh, next); + if (!mod_timer(&neigh->timer, next)) + neigh_hold(neigh); } if (neigh->nud_state & (NUD_INCOMPLETE | NUD_PROBE)) { struct sk_buff *skb = skb_peek(&neigh->arp_queue); -- cgit v0.10.2 From 49636bb12892786e4a7b207b37ca7b0c5ca1cae0 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Sun, 23 Oct 2005 17:18:00 +1000 Subject: [NEIGH] Fix timer leak in neigh_changeaddr neigh_changeaddr attempts to delete neighbour timers without setting nud_state. This doesn't work because the timer may have already fired when we acquire the write lock in neigh_changeaddr. The result is that the timer may keep firing for quite a while until the entry reaches NEIGH_FAILED. It should be setting the nud_state straight away so that if the timer has already fired it can simply exit once we relinquish the lock. In fact, this whole function is simply duplicating the logic in neigh_ifdown which in turn is already doing the right thing when it comes to deleting timers and setting nud_state. So all we have to do is take that code out and put it into a common function and make both neigh_changeaddr and neigh_ifdown call it. Signed-off-by: Herbert Xu diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 37d8d8c..1dcf7fa 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -175,39 +175,10 @@ static void pneigh_queue_purge(struct sk_buff_head *list) } } -void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev) -{ - int i; - - write_lock_bh(&tbl->lock); - - for (i=0; i <= tbl->hash_mask; i++) { - struct neighbour *n, **np; - - np = &tbl->hash_buckets[i]; - while ((n = *np) != NULL) { - if (dev && n->dev != dev) { - np = &n->next; - continue; - } - *np = n->next; - write_lock_bh(&n->lock); - n->dead = 1; - neigh_del_timer(n); - write_unlock_bh(&n->lock); - neigh_release(n); - } - } - - write_unlock_bh(&tbl->lock); -} - -int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev) +static void neigh_flush_dev(struct neigh_table *tbl, struct net_device *dev) { int i; - write_lock_bh(&tbl->lock); - for (i = 0; i <= tbl->hash_mask; i++) { struct neighbour *n, **np = &tbl->hash_buckets[i]; @@ -243,7 +214,19 @@ int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev) neigh_release(n); } } +} +void neigh_changeaddr(struct neigh_table *tbl, struct net_device *dev) +{ + write_lock_bh(&tbl->lock); + neigh_flush_dev(tbl, dev); + write_unlock_bh(&tbl->lock); +} + +int neigh_ifdown(struct neigh_table *tbl, struct net_device *dev) +{ + write_lock_bh(&tbl->lock); + neigh_flush_dev(tbl, dev); pneigh_ifdown(tbl, dev); write_unlock_bh(&tbl->lock); -- cgit v0.10.2 From e80eda94d3eaf1d12cfc97878eff77cd679dabc9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Oct 2005 10:02:50 -0700 Subject: Posix timers: limit number of timers firing at once Bursty timers aren't good for anybody, very much including latency for other programs when we trigger lots of timers in interrupt context. So set a random limit, after which we'll handle the rest on the next timer tick. Noted by Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 7a51a55..d30b304 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -961,14 +961,16 @@ void posix_cpu_timer_get(struct k_itimer *timer, struct itimerspec *itp) static void check_thread_timers(struct task_struct *tsk, struct list_head *firing) { + int maxfire; struct list_head *timers = tsk->cpu_timers; + maxfire = 20; tsk->it_prof_expires = cputime_zero; while (!list_empty(timers)) { struct cpu_timer_list *t = list_entry(timers->next, struct cpu_timer_list, entry); - if (cputime_lt(prof_ticks(tsk), t->expires.cpu)) { + if (!--maxfire || cputime_lt(prof_ticks(tsk), t->expires.cpu)) { tsk->it_prof_expires = t->expires.cpu; break; } @@ -977,12 +979,13 @@ static void check_thread_timers(struct task_struct *tsk, } ++timers; + maxfire = 20; tsk->it_virt_expires = cputime_zero; while (!list_empty(timers)) { struct cpu_timer_list *t = list_entry(timers->next, struct cpu_timer_list, entry); - if (cputime_lt(virt_ticks(tsk), t->expires.cpu)) { + if (!--maxfire || cputime_lt(virt_ticks(tsk), t->expires.cpu)) { tsk->it_virt_expires = t->expires.cpu; break; } @@ -991,12 +994,13 @@ static void check_thread_timers(struct task_struct *tsk, } ++timers; + maxfire = 20; tsk->it_sched_expires = 0; while (!list_empty(timers)) { struct cpu_timer_list *t = list_entry(timers->next, struct cpu_timer_list, entry); - if (tsk->sched_time < t->expires.sched) { + if (!--maxfire || tsk->sched_time < t->expires.sched) { tsk->it_sched_expires = t->expires.sched; break; } @@ -1013,6 +1017,7 @@ static void check_thread_timers(struct task_struct *tsk, static void check_process_timers(struct task_struct *tsk, struct list_head *firing) { + int maxfire; struct signal_struct *const sig = tsk->signal; cputime_t utime, stime, ptime, virt_expires, prof_expires; unsigned long long sched_time, sched_expires; @@ -1045,12 +1050,13 @@ static void check_process_timers(struct task_struct *tsk, } while (t != tsk); ptime = cputime_add(utime, stime); + maxfire = 20; prof_expires = cputime_zero; while (!list_empty(timers)) { struct cpu_timer_list *t = list_entry(timers->next, struct cpu_timer_list, entry); - if (cputime_lt(ptime, t->expires.cpu)) { + if (!--maxfire || cputime_lt(ptime, t->expires.cpu)) { prof_expires = t->expires.cpu; break; } @@ -1059,12 +1065,13 @@ static void check_process_timers(struct task_struct *tsk, } ++timers; + maxfire = 20; virt_expires = cputime_zero; while (!list_empty(timers)) { struct cpu_timer_list *t = list_entry(timers->next, struct cpu_timer_list, entry); - if (cputime_lt(utime, t->expires.cpu)) { + if (!--maxfire || cputime_lt(utime, t->expires.cpu)) { virt_expires = t->expires.cpu; break; } @@ -1073,12 +1080,13 @@ static void check_process_timers(struct task_struct *tsk, } ++timers; + maxfire = 20; sched_expires = 0; while (!list_empty(timers)) { struct cpu_timer_list *t = list_entry(timers->next, struct cpu_timer_list, entry); - if (sched_time < t->expires.sched) { + if (!--maxfire || sched_time < t->expires.sched) { sched_expires = t->expires.sched; break; } -- cgit v0.10.2 From 4196c3af25d98204216a5d6c37ad2cb303a1f2bf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 23 Oct 2005 16:31:16 -0700 Subject: cardbus: limit IO windows to 256 bytes That's what we've always historically done, and bigger windows seem to confuse some cardbus bridges. Or something. Alan reports that this makes the ThinkPad 600x series work properly again: the 4kB IO window for some reason made IDE DMA not work, which makes IDE painfully slow even if it works after DMA timeouts. Signed-off-by: Linus Torvalds diff --git a/drivers/pci/setup-bus.c b/drivers/pci/setup-bus.c index 657be94..28ce3a7 100644 --- a/drivers/pci/setup-bus.c +++ b/drivers/pci/setup-bus.c @@ -40,7 +40,7 @@ * FIXME: IO should be max 256 bytes. However, since we may * have a P2P bridge below a cardbus bridge, we need 4K. */ -#define CARDBUS_IO_SIZE (4*1024) +#define CARDBUS_IO_SIZE (256) #define CARDBUS_MEM_SIZE (32*1024*1024) static void __devinit -- cgit v0.10.2 From a991304496bdaec09f497d1eb5d9dcf2f94b7d5d Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Sun, 23 Oct 2005 12:57:11 -0700 Subject: [PATCH] kernel-parameters cleanup Fix typos & trailing whitespace. Add blank lines in a few places. Remove "AM53C974=" option: driver does not exist. Restrict to < 80 columns in most places (but don't split formatted command-line arguments). Add a few option arguments for completeness. Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 7086f0a..971589a 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -17,7 +17,7 @@ are specified on the kernel command line with the module name plus usbcore.blinkenlights=1 -The text in square brackets at the beginning of the description state the +The text in square brackets at the beginning of the description states the restrictions on the kernel for the said kernel parameter to be valid. The restrictions referred to are that the relevant option is valid if: @@ -27,8 +27,8 @@ restrictions referred to are that the relevant option is valid if: APM Advanced Power Management support is enabled. AX25 Appropriate AX.25 support is enabled. CD Appropriate CD support is enabled. - DEVFS devfs support is enabled. - DRM Direct Rendering Management support is enabled. + DEVFS devfs support is enabled. + DRM Direct Rendering Management support is enabled. EDD BIOS Enhanced Disk Drive Services (EDD) is enabled EFI EFI Partitioning (GPT) is enabled EIDE EIDE/ATAPI support is enabled. @@ -71,7 +71,7 @@ restrictions referred to are that the relevant option is valid if: SERIAL Serial support is enabled. SMP The kernel is an SMP kernel. SPARC Sparc architecture is enabled. - SWSUSP Software suspension is enabled. + SWSUSP Software suspend is enabled. TS Appropriate touchscreen support is enabled. USB USB support is enabled. USBHID USB Human Interface Device support is enabled. @@ -105,13 +105,13 @@ running once the system is up. See header of drivers/scsi/53c7xx.c. See also Documentation/scsi/ncr53c7xx.txt. - acpi= [HW,ACPI] Advanced Configuration and Power Interface - Format: { force | off | ht | strict } + acpi= [HW,ACPI] Advanced Configuration and Power Interface + Format: { force | off | ht | strict | noirq } force -- enable ACPI if default was off off -- disable ACPI if default was on noirq -- do not use ACPI for IRQ routing ht -- run only enough ACPI to enable Hyper Threading - strict -- Be less tolerant of platforms that are not + strict -- Be less tolerant of platforms that are not strictly ACPI specification compliant. See also Documentation/pm.txt, pci=noacpi @@ -119,20 +119,23 @@ running once the system is up. acpi_sleep= [HW,ACPI] Sleep options Format: { s3_bios, s3_mode } See Documentation/power/video.txt - + acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode - Format: { level | edge | high | low } + Format: { level | edge | high | low } - acpi_irq_balance [HW,ACPI] ACPI will balance active IRQs - default in APIC mode + acpi_irq_balance [HW,ACPI] + ACPI will balance active IRQs + default in APIC mode - acpi_irq_nobalance [HW,ACPI] ACPI will not move active IRQs (default) - default in PIC mode + acpi_irq_nobalance [HW,ACPI] + ACPI will not move active IRQs (default) + default in PIC mode - acpi_irq_pci= [HW,ACPI] If irq_balance, Clear listed IRQs for use by PCI + acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for + use by PCI Format: ,... - acpi_irq_isa= [HW,ACPI] If irq_balance, Mark listed IRQs used by ISA + acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA Format: ,... acpi_osi= [HW,ACPI] empty param disables _OSI @@ -145,14 +148,14 @@ running once the system is up. acpi_dbg_layer= [HW,ACPI] Format: - Each bit of the indicates an acpi debug layer, + Each bit of the indicates an ACPI debug layer, 1: enable, 0: disable. It is useful for boot time debugging. After system has booted up, it can be set via /proc/acpi/debug_layer. acpi_dbg_level= [HW,ACPI] Format: - Each bit of the indicates an acpi debug level, + Each bit of the indicates an ACPI debug level, 1: enable, 0: disable. It is useful for boot time debugging. After system has booted up, it can be set via /proc/acpi/debug_level. @@ -161,12 +164,13 @@ running once the system is up. acpi_generic_hotkey [HW,ACPI] Allow consolidated generic hotkey driver to - over-ride platform specific driver. + override platform specific driver. See also Documentation/acpi-hotkey.txt. enable_timer_pin_1 [i386,x86-64] Enable PIN 1 of APIC timer - Can be useful to work around chipset bugs (in particular on some ATI chipsets) + Can be useful to work around chipset bugs + (in particular on some ATI chipsets). The kernel tries to set a reasonable default. disable_timer_pin_1 [i386,x86-64] @@ -182,7 +186,7 @@ running once the system is up. adlib= [HW,OSS] Format: - + advansys= [HW,SCSI] See header of drivers/scsi/advansys.c. @@ -192,7 +196,7 @@ running once the system is up. aedsp16= [HW,OSS] Audio Excel DSP 16 Format: ,,,,, See also header of sound/oss/aedsp16.c. - + aha152x= [HW,SCSI] See Documentation/scsi/aha152x.txt. @@ -205,10 +209,6 @@ running once the system is up. aic79xx= [HW,SCSI] See Documentation/scsi/aic79xx.txt. - AM53C974= [HW,SCSI] - Format: ,,, - See also header of drivers/scsi/AM53C974.c. - amijoy.map= [HW,JOY] Amiga joystick support Map of devices attached to JOY0DAT and JOY1DAT Format: , @@ -219,23 +219,24 @@ running once the system is up. connected to one of 16 gameports Format: ,,.. - apc= [HW,SPARC] Power management functions (SPARCstation-4/5 + deriv.) + apc= [HW,SPARC] + Power management functions (SPARCstation-4/5 + deriv.) Format: noidle Disable APC CPU standby support. SPARCstation-Fox does not play well with APC CPU idle - disable it if you have APC and your system crashes randomly. - apic= [APIC,i386] Change the output verbosity whilst booting + apic= [APIC,i386] Change the output verbosity whilst booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output when initialising the APIC and IO-APIC components. - + apm= [APM] Advanced Power Management See header of arch/i386/kernel/apm.c. applicom= [HW] Format: , - + arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards Format: ,, @@ -250,38 +251,40 @@ running once the system is up. atkbd.reset= [HW] Reset keyboard during initialization - atkbd.set= [HW] Select keyboard code set - Format: (2 = AT (default) 3 = PS/2) + atkbd.set= [HW] Select keyboard code set + Format: (2 = AT (default), 3 = PS/2) atkbd.scroll= [HW] Enable scroll wheel on MS Office and similar keyboards atkbd.softraw= [HW] Choose between synthetic and real raw mode Format: (0 = real, 1 = synthetic (default)) - - atkbd.softrepeat= - [HW] Use software keyboard repeat + + atkbd.softrepeat= [HW] + Use software keyboard repeat autotest [IA64] awe= [HW,OSS] AWE32/SB32/AWE64 wave table synth Format: ,, - + aztcd= [HW,CD] Aztech CD268 CDROM driver Format: ,0x79 (?) baycom_epp= [HW,AX25] Format: , - + baycom_par= [HW,AX25] BayCom Parallel Port AX.25 Modem Format: , See header of drivers/net/hamradio/baycom_par.c. - baycom_ser_fdx= [HW,AX25] BayCom Serial Port AX.25 Modem (Full Duplex Mode) + baycom_ser_fdx= [HW,AX25] + BayCom Serial Port AX.25 Modem (Full Duplex Mode) Format: ,,[,] See header of drivers/net/hamradio/baycom_ser_fdx.c. - baycom_ser_hdx= [HW,AX25] BayCom Serial Port AX.25 Modem (Half Duplex Mode) + baycom_ser_hdx= [HW,AX25] + BayCom Serial Port AX.25 Modem (Half Duplex Mode) Format: ,, See header of drivers/net/hamradio/baycom_ser_hdx.c. @@ -292,7 +295,8 @@ running once the system is up. blkmtd_count= bttv.card= [HW,V4L] bttv (bt848 + bt878 based grabber cards) - bttv.radio= Most important insmod options are available as kernel args too. + bttv.radio= Most important insmod options are available as + kernel args too. bttv.pll= See Documentation/video4linux/bttv/Insmod-options bttv.tuner= and Documentation/video4linux/bttv/CARDLIST @@ -318,15 +322,17 @@ running once the system is up. checkreqprot [SELINUX] Set initial checkreqprot flag value. Format: { "0" | "1" } See security/selinux/Kconfig help text. - 0 -- check protection applied by kernel (includes any implied execute protection). + 0 -- check protection applied by kernel (includes + any implied execute protection). 1 -- check protection requested by application. Default value is set via a kernel config option. - Value can be changed at runtime via /selinux/checkreqprot. - - clock= [BUGS=IA-32, HW] gettimeofday timesource override. + Value can be changed at runtime via + /selinux/checkreqprot. + + clock= [BUGS=IA-32,HW] gettimeofday timesource override. Forces specified timesource (if avaliable) to be used - when calculating gettimeofday(). If specicified timesource - is not avalible, it defaults to PIT. + when calculating gettimeofday(). If specicified + timesource is not avalible, it defaults to PIT. Format: { pit | tsc | cyclone | pmtmr } hpet= [IA-32,HPET] option to disable HPET and use PIT. @@ -336,17 +342,19 @@ running once the system is up. Format: { auto | [,][] } com20020= [HW,NET] ARCnet - COM20020 chipset - Format: [,[,[,[,[,]]]]] + Format: + [,[,[,[,[,]]]]] com90io= [HW,NET] ARCnet - COM90xx chipset (IO-mapped buffers) Format: [,] - com90xx= [HW,NET] ARCnet - COM90xx chipset (memory-mapped buffers) + com90xx= [HW,NET] + ARCnet - COM90xx chipset (memory-mapped buffers) Format: [,[,]] condev= [HW,S390] console device conmode= - + console= [KNL] Output console device and options. tty Use the virtual console device . @@ -367,7 +375,8 @@ running once the system is up. options are the same as for ttyS, above. cpcihp_generic= [HW,PCI] Generic port I/O CompactPCI driver - Format: ,,,[,] + Format: + ,,,[,] cpia_pp= [HW,PPT] Format: { parport | auto | none } @@ -384,10 +393,10 @@ running once the system is up. cs89x0_media= [HW,NET] Format: { rj45 | aui | bnc } - + cyclades= [HW,SERIAL] Cyclades multi-serial port adapter. - - dasd= [HW,NET] + + dasd= [HW,NET] See header of drivers/s390/block/dasd_devmap.c. db9.dev[2|3]= [HW,JOY] Multisystem joystick support via parallel port @@ -406,7 +415,7 @@ running once the system is up. dhash_entries= [KNL] Set number of hash buckets for dentry cache. - + digi= [HW,SERIAL] IO parameters + enable/disable command. @@ -424,11 +433,11 @@ running once the system is up. dtc3181e= [HW,SCSI] - earlyprintk= [IA-32, X86-64] + earlyprintk= [IA-32,X86-64] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] - Append ,keep to not disable it when the real console + Append ",keep" to not disable it when the real console takes over. Only vga or serial at a time, not both. @@ -451,7 +460,7 @@ running once the system is up. Format: {"of[f]" | "sk[ipmbr]"} See comment in arch/i386/boot/edd.S - eicon= [HW,ISDN] + eicon= [HW,ISDN] Format: ,, eisa_irq_edge= [PARISC,HW] @@ -462,12 +471,13 @@ running once the system is up. arch/i386/kernel/cpu/cpufreq/elanfreq.c. elevator= [IOSCHED] - Format: {"as"|"cfq"|"deadline"|"noop"} - See Documentation/block/as-iosched.txt - and Documentation/block/deadline-iosched.txt for details. + Format: {"as" | "cfq" | "deadline" | "noop"} + See Documentation/block/as-iosched.txt and + Documentation/block/deadline-iosched.txt for details. + elfcorehdr= [IA-32] - Specifies physical address of start of kernel core image - elf header. + Specifies physical address of start of kernel core + image elf header. See Documentation/kdump.txt for details. enforcing [SELINUX] Set initial enforcing status. @@ -485,7 +495,7 @@ running once the system is up. es1371= [HW,OSS] Format: ,[,[]] See also header of sound/oss/es1371.c. - + ether= [HW,NET] Ethernet cards parameters This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. @@ -526,12 +536,13 @@ running once the system is up. gus= [HW,OSS] Format: ,,, - + gvp11= [HW,SCSI] hashdist= [KNL,NUMA] Large hashes allocated during boot are distributed across NUMA nodes. Defaults on for IA-64, off otherwise. + Format: 0 | 1 (for off | on) hcl= [IA-64] SGI's Hardware Graph compatibility layer @@ -595,13 +606,13 @@ running once the system is up. ide?= [HW] (E)IDE subsystem Format: ide?=noprobe or chipset specific parameters. See Documentation/ide.txt. - + idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed See Documentation/ide.txt. idle= [HW] Format: idle=poll or idle=halt - + ihash_entries= [KNL] Set number of hash buckets for inode cache. @@ -649,7 +660,7 @@ running once the system is up. firmware running. isapnp= [ISAPNP] - Format: , , , + Format: ,,, isolcpus= [KNL,SMP] Isolate CPUs from the general scheduler. Format: ,..., @@ -661,32 +672,33 @@ running once the system is up. "number of CPUs in system - 1". This option is the preferred way to isolate CPUs. The - alternative - manually setting the CPU mask of all tasks - in the system can cause problems and suboptimal load - balancer performance. + alternative -- manually setting the CPU mask of all + tasks in the system -- can cause problems and + suboptimal load balancer performance. isp16= [HW,CD] Format: ,,, - iucv= [HW,NET] + iucv= [HW,NET] js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. keepinitrd [HW,ARM] - kstack=N [IA-32, X86-64] Print N words from the kernel stack + kstack=N [IA-32,X86-64] Print N words from the kernel stack in oops dumps. l2cr= [PPC] - lapic [IA-32,APIC] Enable the local APIC even if BIOS disabled it. + lapic [IA-32,APIC] Enable the local APIC even if BIOS + disabled it. lasi= [HW,SCSI] PARISC LASI driver for the 53c700 chip Format: addr:,irq: - llsc*= [IA64] - See function print_params() in arch/ia64/sn/kernel/llsc4.c. + llsc*= [IA64] See function print_params() in + arch/ia64/sn/kernel/llsc4.c. load_ramdisk= [RAM] List of ramdisks to load from floppy See Documentation/ramdisk.txt. @@ -713,8 +725,9 @@ running once the system is up. 7 (KERN_DEBUG) debug-level messages log_buf_len=n Sets the size of the printk ring buffer, in bytes. - Format is n, nk, nM. n must be a power of two. The - default is set in kernel config. + Format: { n | nk | nM } + n must be a power of two. The default size + is set in the kernel config file. lp=0 [LP] Specify parallel ports to use, e.g, lp=port[,port...] lp=none,parport0 (lp0 not configured, lp1 uses @@ -750,23 +763,23 @@ running once the system is up. ltpc= [NET] Format: ,, - mac5380= [HW,SCSI] - Format: ,,,, + mac5380= [HW,SCSI] Format: + ,,,, - mac53c9x= [HW,SCSI] - Format: ,,,,,,, + mac53c9x= [HW,SCSI] Format: + ,,,,,,, - machvec= [IA64] - Force the use of a particular machine-vector (machvec) in a generic - kernel. Example: machvec=hpzx1_swiotlb + machvec= [IA64] Force the use of a particular machine-vector + (machvec) in a generic kernel. + Example: machvec=hpzx1_swiotlb - mad16= [HW,OSS] - Format: ,,,,,, + mad16= [HW,OSS] Format: + ,,,,,, maui= [HW,OSS] Format: , - - max_loop= [LOOP] Maximum number of loopback devices that can + + max_loop= [LOOP] Maximum number of loopback devices that can be mounted Format: <1-256> @@ -776,11 +789,11 @@ running once the system is up. max_addr=[KMG] [KNL,BOOT,ia64] All physical memory greater than or equal to this physical address is ignored. - max_luns= [SCSI] Maximum number of LUNs to probe + max_luns= [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. max_report_luns= - [SCSI] Maximum number of LUNs received + [SCSI] Maximum number of LUNs received. Should be between 1 and 16384. mca-pentium [BUGS=IA-32] @@ -796,11 +809,11 @@ running once the system is up. md= [HW] RAID subsystems devices and level See Documentation/md.txt. - + mdacon= [MDA] Format: , Specifies range of consoles to be captured by the MDA. - + mem=nn[KMG] [KNL,BOOT] Force usage of a specific amount of memory Amount of memory to be used when the kernel is not able to see the whole system memory or for test. @@ -851,15 +864,15 @@ running once the system is up. MTD_Partition= [MTD] Format: ,,, - MTD_Region= [MTD] - Format: ,[,,,,] + MTD_Region= [MTD] Format: + ,[,,,,] mtdparts= [MTD] See drivers/mtd/cmdline.c. mtouchusb.raw_coordinates= - [HW] Make the MicroTouch USB driver use raw coordinates ('y', default) - or cooked coordinates ('n') + [HW] Make the MicroTouch USB driver use raw coordinates + ('y', default) or cooked coordinates ('n') n2= [NET] SDL Inc. RISCom/N2 synchronous serial card @@ -880,7 +893,9 @@ running once the system is up. Format: ,,,, Note that mem_start is often overloaded to mean something different and driver-specific. - + This usage is only documented in each driver source + file if at all. + nfsaddrs= [NFS] See Documentation/nfsroot.txt. @@ -893,8 +908,8 @@ running once the system is up. emulation library even if a 387 maths coprocessor is present. - noalign [KNL,ARM] - + noalign [KNL,ARM] + noapic [SMP,APIC] Tells the kernel to not make use of any IOAPICs that may be present in the system. @@ -905,19 +920,19 @@ running once the system is up. on "Classic" PPC cores. nocache [ARM] - + nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects. noexec [IA-64] - noexec [IA-32, X86-64] + noexec [IA-32,X86-64] noexec=on: enable non-executable mappings (default) noexec=off: disable nn-executable mappings nofxsr [BUGS=IA-32] nohlt [BUGS=ARM] - + no-hlt [BUGS=IA-32] Tells the kernel that the hlt instruction doesn't work correctly and not to use it. @@ -948,8 +963,9 @@ running once the system is up. noresidual [PPC] Don't use residual data on PReP machines. - noresume [SWSUSP] Disables resume and restore original swap space. - + noresume [SWSUSP] Disables resume and restores original swap + space. + no-scroll [VGA] Disables scrollback. This is required for the Braillex ib80-piezo Braille reader made by F.H. Papenmeier (Germany). @@ -965,16 +981,16 @@ running once the system is up. nousb [USB] Disable the USB subsystem nowb [ARM] - + opl3= [HW,OSS] Format: opl3sa= [HW,OSS] Format: ,,,,, - opl3sa2= [HW,OSS] - Format: ,,,,,,,[,,,,,,,,,[,, parkbd.mode= [HW] Parallel port keyboard adapter mode of operation, 0 for XT, 1 for AT (default is AT). - Format: - - parport=0 [HW,PPT] Specify parallel ports. 0 disables. - parport=auto Use 'auto' to force the driver to use - parport=0xBBB[,IRQ[,DMA]] any IRQ/DMA settings detected (the - default is to ignore detected IRQ/DMA - settings because of possible - conflicts). You can specify the base - address, IRQ, and DMA settings; IRQ and - DMA should be numbers, or 'auto' (for - using detected settings on that - particular port), or 'nofifo' (to avoid - using a FIFO even if it is detected). - Parallel ports are assigned in the - order they are specified on the command - line, starting with parport0. - - parport_init_mode= - [HW,PPT] Configure VIA parallel port to - operate in specific mode. This is - necessary on Pegasos computer where - firmware has no options for setting up - parallel port mode and sets it to - spp. Currently this function knows - 686a and 8231 chips. + Format: + + parport= [HW,PPT] Specify parallel ports. 0 disables. + Format: { 0 | auto | 0xBBB[,IRQ[,DMA]] } + Use 'auto' to force the driver to use any + IRQ/DMA settings detected (the default is to + ignore detected IRQ/DMA settings because of + possible conflicts). You can specify the base + address, IRQ, and DMA settings; IRQ and DMA + should be numbers, or 'auto' (for using detected + settings on that particular port), or 'nofifo' + (to avoid using a FIFO even if it is detected). + Parallel ports are assigned in the order they + are specified on the command line, starting + with parport0. + + parport_init_mode= [HW,PPT] + Configure VIA parallel port to operate in + a specific mode. This is necessary on Pegasos + computer where firmware has no options for setting + up parallel port mode and sets it to spp. + Currently this function knows 686a and 8231 chips. Format: [spp|ps2|epp|ecp|ecpepp] - pas2= [HW,OSS] - Format: ,,,,,,, - + pas2= [HW,OSS] Format: + ,,,,,,, + pas16= [HW,SCSI] See header of drivers/scsi/pas16.c. @@ -1032,64 +1045,67 @@ running once the system is up. See header of drivers/block/paride/pcd.c. See also Documentation/paride.txt. - pci=option[,option...] [PCI] various PCI subsystem options: - off [IA-32] don't probe for the PCI bus - bios [IA-32] force use of PCI BIOS, don't access - the hardware directly. Use this if your machine - has a non-standard PCI host bridge. - nobios [IA-32] disallow use of PCI BIOS, only direct - hardware access methods are allowed. Use this - if you experience crashes upon bootup and you - suspect they are caused by the BIOS. - conf1 [IA-32] Force use of PCI Configuration Mechanism 1. - conf2 [IA-32] Force use of PCI Configuration Mechanism 2. - nosort [IA-32] Don't sort PCI devices according to - order given by the PCI BIOS. This sorting is done - to get a device order compatible with older kernels. - biosirq [IA-32] Use PCI BIOS calls to get the interrupt - routing table. These calls are known to be buggy - on several machines and they hang the machine when used, - but on other computers it's the only way to get the - interrupt routing table. Try this option if the kernel - is unable to allocate IRQs or discover secondary PCI - buses on your motherboard. - rom [IA-32] Assign address space to expansion ROMs. - Use with caution as certain devices share address - decoders between ROMs and other resources. - irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be assigned - automatically to PCI devices. You can make the kernel - exclude IRQs of your ISA cards this way. + pci=option[,option...] [PCI] various PCI subsystem options: + off [IA-32] don't probe for the PCI bus + bios [IA-32] force use of PCI BIOS, don't access + the hardware directly. Use this if your machine + has a non-standard PCI host bridge. + nobios [IA-32] disallow use of PCI BIOS, only direct + hardware access methods are allowed. Use this + if you experience crashes upon bootup and you + suspect they are caused by the BIOS. + conf1 [IA-32] Force use of PCI Configuration + Mechanism 1. + conf2 [IA-32] Force use of PCI Configuration + Mechanism 2. + nosort [IA-32] Don't sort PCI devices according to + order given by the PCI BIOS. This sorting is + done to get a device order compatible with + older kernels. + biosirq [IA-32] Use PCI BIOS calls to get the interrupt + routing table. These calls are known to be buggy + on several machines and they hang the machine + when used, but on other computers it's the only + way to get the interrupt routing table. Try + this option if the kernel is unable to allocate + IRQs or discover secondary PCI buses on your + motherboard. + rom [IA-32] Assign address space to expansion ROMs. + Use with caution as certain devices share + address decoders between ROMs and other + resources. + irqmask=0xMMMM [IA-32] Set a bit mask of IRQs allowed to be + assigned automatically to PCI devices. You can + make the kernel exclude IRQs of your ISA cards + this way. pirqaddr=0xAAAAA [IA-32] Specify the physical address - of the PIRQ table (normally generated - by the BIOS) if it is outside the - F0000h-100000h range. - lastbus=N [IA-32] Scan all buses till bus #N. Can be useful - if the kernel is unable to find your secondary buses - and you want to tell it explicitly which ones they are. - assign-busses [IA-32] Always assign all PCI bus - numbers ourselves, overriding - whatever the firmware may have - done. - usepirqmask [IA-32] Honor the possible IRQ mask - stored in the BIOS $PIR table. This is - needed on some systems with broken - BIOSes, notably some HP Pavilion N5400 - and Omnibook XE3 notebooks. This will - have no effect if ACPI IRQ routing is - enabled. - noacpi [IA-32] Do not use ACPI for IRQ routing - or for PCI scanning. - routeirq Do IRQ routing for all PCI devices. - This is normally done in pci_enable_device(), - so this option is a temporary workaround - for broken drivers that don't call it. - - firmware [ARM] Do not re-enumerate the bus but - instead just use the configuration - from the bootloader. This is currently - used on IXP2000 systems where the - bus has to be configured a certain way - for adjunct CPUs. + of the PIRQ table (normally generated + by the BIOS) if it is outside the + F0000h-100000h range. + lastbus=N [IA-32] Scan all buses thru bus #N. Can be + useful if the kernel is unable to find your + secondary buses and you want to tell it + explicitly which ones they are. + assign-busses [IA-32] Always assign all PCI bus + numbers ourselves, overriding + whatever the firmware may have done. + usepirqmask [IA-32] Honor the possible IRQ mask stored + in the BIOS $PIR table. This is needed on + some systems with broken BIOSes, notably + some HP Pavilion N5400 and Omnibook XE3 + notebooks. This will have no effect if ACPI + IRQ routing is enabled. + noacpi [IA-32] Do not use ACPI for IRQ routing + or for PCI scanning. + routeirq Do IRQ routing for all PCI devices. + This is normally done in pci_enable_device(), + so this option is a temporary workaround + for broken drivers that don't call it. + firmware [ARM] Do not re-enumerate the bus but instead + just use the configuration from the + bootloader. This is currently used on + IXP2000 systems where the bus has to be + configured a certain way for adjunct CPUs. pcmv= [HW,PCMCIA] BadgePAD 4 @@ -1127,19 +1143,20 @@ running once the system is up. [ISAPNP] Exclude DMAs for the autoconfiguration pnp_reserve_io= [ISAPNP] Exclude I/O ports for the autoconfiguration - Ranges are in pairs (I/O port base and size). + Ranges are in pairs (I/O port base and size). pnp_reserve_mem= - [ISAPNP] Exclude memory regions for the autoconfiguration + [ISAPNP] Exclude memory regions for the + autoconfiguration. Ranges are in pairs (memory base and size). profile= [KNL] Enable kernel profiling via /proc/profile - { schedule | } - (param: schedule - profile schedule points} - (param: profile step/bucket size as a power of 2 for - statistical time based profiling) + Format: [schedule,] + Param: "schedule" - profile schedule points. + Param: - step/bucket size as a power of 2 for + statistical time based profiling. - processor.max_cstate= [HW, ACPI] + processor.max_cstate= [HW,ACPI] Limit processor to maximum C-state max_cstate=9 overrides any DMI blacklist limit. @@ -1147,27 +1164,28 @@ running once the system is up. before loading. See Documentation/ramdisk.txt. - psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to - probe for (bare|imps|exps|lifebook|any). + psmouse.proto= [HW,MOUSE] Highest PS2 mouse protocol extension to + probe for; one of (bare|imps|exps|lifebook|any). psmouse.rate= [HW,MOUSE] Set desired mouse report rate, in reports per second. - psmouse.resetafter= - [HW,MOUSE] Try to reset the device after so many bad packets + psmouse.resetafter= [HW,MOUSE] + Try to reset the device after so many bad packets (0 = never). psmouse.resolution= [HW,MOUSE] Set desired mouse resolution, in dpi. psmouse.smartscroll= - [HW,MOUSE] Controls Logitech smartscroll autorepeat, + [HW,MOUSE] Controls Logitech smartscroll autorepeat. 0 = disabled, 1 = enabled (default). pss= [HW,OSS] Personal Sound System (ECHO ESC614) - Format: ,,,,, + Format: + ,,,,, pt. [PARIDE] See Documentation/paride.txt. quiet= [KNL] Disable log messages - + r128= [HW,DRM] raid= [HW,RAID] @@ -1176,10 +1194,9 @@ running once the system is up. ramdisk= [RAM] Sizes of RAM disks in kilobytes [deprecated] See Documentation/ramdisk.txt. - ramdisk_blocksize= - [RAM] + ramdisk_blocksize= [RAM] See Documentation/ramdisk.txt. - + ramdisk_size= [RAM] Sizes of RAM disks in kilobytes New name for the ramdisk parameter. See Documentation/ramdisk.txt. @@ -1195,7 +1212,8 @@ running once the system is up. reserve= [KNL,BUGS] Force the kernel to ignore some iomem area - resume= [SWSUSP] Specify the partition device for software suspension + resume= [SWSUSP] + Specify the partition device for software suspend rhash_entries= [KNL,NET] Set number of hash buckets for route cache @@ -1225,7 +1243,7 @@ running once the system is up. Format: ,,, sbni= [NET] Granch SBNI12 leased line adapter - + sbpcd= [HW,CD] Soundblaster CD adapter Format: , See a comment before function sbpcd_setup() in @@ -1258,21 +1276,20 @@ running once the system is up. serialnumber [BUGS=IA-32] - sg_def_reserved_size= - [SCSI] - + sg_def_reserved_size= [SCSI] + sgalaxy= [HW,OSS] Format: ,,,, shapers= [NET] Maximal number of shapers. - + sim710= [SCSI,HW] See header of drivers/scsi/sim710.c. simeth= [IA-64] simscsi= - + sjcd= [HW,CD] Format: ,, See header of drivers/cdrom/sjcd.c. @@ -1403,10 +1420,10 @@ running once the system is up. snd-wavefront= [HW,ALSA] snd-ymfpci= [HW,ALSA] - + sonicvibes= [HW,OSS] Format: - + sonycd535= [HW,CD] Format: [,] @@ -1423,7 +1440,7 @@ running once the system is up. sscape= [HW,OSS] Format: ,,,, - + st= [HW,SCSI] SCSI tape parameters (buffers, etc.) See Documentation/scsi/st.txt. @@ -1446,7 +1463,7 @@ running once the system is up. stram_swap= [HW,M68k] swiotlb= [IA-64] Number of I/O TLB slabs - + switches= [HW,M68k] sym53c416= [HW,SCSI] @@ -1479,14 +1496,16 @@ running once the system is up. tp720= [HW,PS2] trix= [HW,OSS] MediaTrix AudioTrix Pro - Format: ,,,,,,,, - + Format: + ,,,,,,,, + tsdev.xres= [TS] Horizontal screen resolution. tsdev.yres= [TS] Vertical screen resolution. - turbografx.map[2|3]= - [HW,JOY] TurboGraFX parallel port interface - Format: ,,,,,,, + turbografx.map[2|3]= [HW,JOY] + TurboGraFX parallel port interface + Format: + ,,,,,,, See also Documentation/input/joystick-parport.txt u14-34f= [HW,SCSI] UltraStor 14F/34F SCSI host adapter @@ -1502,17 +1521,18 @@ running once the system is up. usbhid.mousepoll= [USBHID] The interval which mice are to be polled at. - + video= [FB] Frame buffer configuration See Documentation/fb/modedb.txt. vga= [BOOT,IA-32] Select a particular video mode - See Documentation/i386/boot.txt and Documentation/svga.txt. + See Documentation/i386/boot.txt and + Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is passed to the kernel using a special protocol. - vmalloc=nn[KMG] [KNL,BOOT] forces the vmalloc area to have an exact + vmalloc=nn[KMG] [KNL,BOOT] Forces the vmalloc area to have an exact size of . This can be used to increase the minimum size (128MB on x86). It can also be used to decrease the size and leave more room for directly @@ -1520,11 +1540,11 @@ running once the system is up. vmhalt= [KNL,S390] - vmpoff= [KNL,S390] - + vmpoff= [KNL,S390] + waveartist= [HW,OSS] Format: ,,, - + wd33c93= [HW,SCSI] See header of drivers/scsi/wd33c93.c. @@ -1538,21 +1558,25 @@ running once the system is up. xd_geo= See header of drivers/block/xd.c. xirc2ps_cs= [NET,PCMCIA] - Format: ,,,,,[,[,[,]]] - + Format: + ,,,,,[,[,[,]]] +______________________________________________________________________ Changelog: +2000-06-?? Mr. Unknown The last known update (for 2.4.0) - the changelog was not kept before. - 2000-06-?? Mr. Unknown +2002-11-24 Petr Baudis + Randy Dunlap Update for 2.5.49, description for most of the options introduced, references to other documentation (C files, READMEs, ..), added S390, PPC, SPARC, MTD, ALSA and OSS category. Minor corrections and reformatting. - 2002-11-24 Petr Baudis - Randy Dunlap + +2005-10-19 Randy Dunlap + Lots of typos, whitespace, some reformatting. TODO: -- cgit v0.10.2 From 8766ce41018a0cb80fbe0ce7dbf747f357c752da Mon Sep 17 00:00:00 2001 From: Kostik Belousov Date: Sun, 23 Oct 2005 12:57:13 -0700 Subject: [PATCH] aio syscalls are not checked by lsm Another case of missing call to security_file_permission: aio functions (namely, io_submit) does not check credentials with security modules. Below is the simple patch to the problem. It seems that it is enough to check for rights at the request submission time. Signed-off-by: Kostik Belousov Signed-off-by: Chris Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/aio.c b/fs/aio.c index 9fe7216..edfca5b 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -1397,6 +1397,9 @@ static ssize_t aio_setup_iocb(struct kiocb *kiocb) if (unlikely(!access_ok(VERIFY_WRITE, kiocb->ki_buf, kiocb->ki_left))) break; + ret = security_file_permission(file, MAY_READ); + if (unlikely(ret)) + break; ret = -EINVAL; if (file->f_op->aio_read) kiocb->ki_retry = aio_pread; @@ -1409,6 +1412,9 @@ static ssize_t aio_setup_iocb(struct kiocb *kiocb) if (unlikely(!access_ok(VERIFY_READ, kiocb->ki_buf, kiocb->ki_left))) break; + ret = security_file_permission(file, MAY_WRITE); + if (unlikely(ret)) + break; ret = -EINVAL; if (file->f_op->aio_write) kiocb->ki_retry = aio_pwrite; -- cgit v0.10.2 From 282c1f5eba150d0b156ffa9e6b064f1d92f8315f Mon Sep 17 00:00:00 2001 From: Stephen Smalley Date: Sun, 23 Oct 2005 12:57:15 -0700 Subject: [PATCH] selinux: Fix NULL deref in policydb_destroy This patch fixes a possible NULL dereference in policydb_destroy, where p->type_attr_map can be NULL if policydb_destroy is called to clean up a partially loaded policy upon an error during policy load. Please apply. Signed-off-by: Stephen Smalley Acked-by: James Morris Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/selinux/ss/policydb.c b/security/selinux/ss/policydb.c index 0a75832..8e6262d 100644 --- a/security/selinux/ss/policydb.c +++ b/security/selinux/ss/policydb.c @@ -650,8 +650,10 @@ void policydb_destroy(struct policydb *p) } if (lrt) kfree(lrt); - for (i = 0; i < p->p_types.nprim; i++) - ebitmap_destroy(&p->type_attr_map[i]); + if (p->type_attr_map) { + for (i = 0; i < p->p_types.nprim; i++) + ebitmap_destroy(&p->type_attr_map[i]); + } kfree(p->type_attr_map); return; -- cgit v0.10.2 From 20c19e4179884d7e843314071e2dfb1ea7b0afcd Mon Sep 17 00:00:00 2001 From: Davi Arnaut Date: Sun, 23 Oct 2005 12:57:16 -0700 Subject: [PATCH] SELinux: handle sel_make_bools() failure in selinuxfs This patch fixes error handling in sel_make_bools(), where currently we'd get a memory leak via security_get_bools() and try to kfree() the wrong pointer if called again. Signed-off-by: James Morris Acked-by: Stephen Smalley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/selinux/selinuxfs.c b/security/selinux/selinuxfs.c index 8eb140d..a45cc97 100644 --- a/security/selinux/selinuxfs.c +++ b/security/selinux/selinuxfs.c @@ -879,7 +879,7 @@ static ssize_t sel_commit_bools_write(struct file *filep, if (sscanf(page, "%d", &new_value) != 1) goto out; - if (new_value) { + if (new_value && bool_pending_values) { security_set_bools(bool_num, bool_pending_values); } @@ -952,6 +952,7 @@ static int sel_make_bools(void) /* remove any existing files */ kfree(bool_pending_values); + bool_pending_values = NULL; sel_remove_bools(dir); @@ -1002,6 +1003,7 @@ out: } return ret; err: + kfree(values); d_genocide(dir); ret = -ENOMEM; goto out; -- cgit v0.10.2 From c0fef676bbd75e711711ed3ff5bebb7bfd1bdb00 Mon Sep 17 00:00:00 2001 From: Mike Krufky Date: Sun, 23 Oct 2005 12:57:17 -0700 Subject: [PATCH] Kconfig: saa7134-dvb should not select cx22702 On 2005-05-01, Gerd Knorr sent in a patch to add cx22702 to cx88-dvb: [PATCH] dvb: cx22702 frontend driver update http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=9990d744bea7d28e83c420e2c9d524c7a8a2d136 ...but as we can see, the Kconfig portion of his patch was incorrectly applied to saa7134-dvb instead of cx88-dvb. On 2005-06-24, Adrian bunk fixed cx88-dvb: [PATCH] VIDEO_CX88_DVB must select DVB_CX22702 http://www.kernel.org/git/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=d6988588e13616587aa879c2e0bd7cd811705e5d ...but we never removed the original patch from Gerd. This patch sets things straight: saa7134-dvb should not select cx22702 Signed-off-by: Michael Krufky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 9357035..bbb989d 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -262,7 +262,6 @@ config VIDEO_SAA7134_DVB depends on VIDEO_SAA7134 && DVB_CORE select VIDEO_BUF_DVB select DVB_MT352 - select DVB_CX22702 select DVB_TDA1004X ---help--- This adds support for DVB cards based on the -- cgit v0.10.2 From 8d3b35914aa54232b27e6a2b57d84092aadc5e86 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sun, 23 Oct 2005 12:57:18 -0700 Subject: [PATCH] inotify/idr leak fix Fix a bug which was reported and diagnosed by Stefan Jones IDR trees include a cache of idr_layer objects. There's no way to destroy this cache, so when we discard an overall idr tree we end up leaking some memory. Add and use idr_destroy() for this. v9fs and infiniband also need to use idr_destroy() to avoid leaks. Or, we make the cache global, like radix_tree_preload(). Which is probably better. Later. Cc: Eric Van Hensbergen Cc: Roland Dreier Cc: Robert Love Cc: John McCutchan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/inotify.c b/fs/inotify.c index a37e9fb..9fbaebf 100644 --- a/fs/inotify.c +++ b/fs/inotify.c @@ -176,6 +176,7 @@ static inline void put_inotify_dev(struct inotify_device *dev) if (atomic_dec_and_test(&dev->count)) { atomic_dec(&dev->user->inotify_devs); free_uid(dev->user); + idr_destroy(&dev->idr); kfree(dev); } } diff --git a/include/linux/idr.h b/include/linux/idr.h index ca3b7e4..3d5de45 100644 --- a/include/linux/idr.h +++ b/include/linux/idr.h @@ -75,4 +75,5 @@ int idr_pre_get(struct idr *idp, unsigned gfp_mask); int idr_get_new(struct idr *idp, void *ptr, int *id); int idr_get_new_above(struct idr *idp, void *ptr, int starting_id, int *id); void idr_remove(struct idr *idp, int id); +void idr_destroy(struct idr *idp); void idr_init(struct idr *idp); diff --git a/lib/idr.c b/lib/idr.c index 6415d05..d4df21d 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -346,6 +346,19 @@ void idr_remove(struct idr *idp, int id) EXPORT_SYMBOL(idr_remove); /** + * idr_destroy - release all cached layers within an idr tree + * idp: idr handle + */ +void idr_destroy(struct idr *idp) +{ + while (idp->id_free_cnt) { + struct idr_layer *p = alloc_layer(idp); + kmem_cache_free(idr_layer_cache, p); + } +} +EXPORT_SYMBOL(idr_destroy); + +/** * idr_find - return pointer for given id * @idp: idr handle * @id: lookup key -- cgit v0.10.2 From 75eeec2f3fd9e8a16777219ebf1bf8395845faa7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Sun, 23 Oct 2005 12:57:19 -0700 Subject: [PATCH] ib: mthca: Always re-arm EQs in mthca_tavor_interrupt() We should always re-arm an event queue's interrupt in mthca_tavor_interrupt() if the corresponding bit is set in the event cause register (ECR), even if we didn't find any entries in the EQ. If we don't, then there's a window where we miss an EQ entry and then get stuck because we don't get another EQ event. Signed-off-by: Roland Dreier Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/infiniband/hw/mthca/mthca_eq.c b/drivers/infiniband/hw/mthca/mthca_eq.c index c81fa8e..8dfafda 100644 --- a/drivers/infiniband/hw/mthca/mthca_eq.c +++ b/drivers/infiniband/hw/mthca/mthca_eq.c @@ -396,20 +396,21 @@ static irqreturn_t mthca_tavor_interrupt(int irq, void *dev_ptr, struct pt_regs writel(dev->eq_table.clr_mask, dev->eq_table.clr_int); ecr = readl(dev->eq_regs.tavor.ecr_base + 4); - if (ecr) { - writel(ecr, dev->eq_regs.tavor.ecr_base + - MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4); + if (!ecr) + return IRQ_NONE; - for (i = 0; i < MTHCA_NUM_EQ; ++i) - if (ecr & dev->eq_table.eq[i].eqn_mask && - mthca_eq_int(dev, &dev->eq_table.eq[i])) { + writel(ecr, dev->eq_regs.tavor.ecr_base + + MTHCA_ECR_CLR_BASE - MTHCA_ECR_BASE + 4); + + for (i = 0; i < MTHCA_NUM_EQ; ++i) + if (ecr & dev->eq_table.eq[i].eqn_mask) { + if (mthca_eq_int(dev, &dev->eq_table.eq[i])) tavor_set_eq_ci(dev, &dev->eq_table.eq[i], dev->eq_table.eq[i].cons_index); - tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn); - } - } + tavor_eq_req_not(dev, dev->eq_table.eq[i].eqn); + } - return IRQ_RETVAL(ecr); + return IRQ_HANDLED; } static irqreturn_t mthca_tavor_msi_x_interrupt(int irq, void *eq_ptr, -- cgit v0.10.2 From 108150ea78003044e41150c75259447b2c0953b6 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 23 Oct 2005 20:25:39 +0400 Subject: [PATCH] posix-timers: fix cleanup_timers() and run_posix_cpu_timers() races 1. cleanup_timers() sets timer->task = NULL under tasklist + ->sighand locks. That means that this code in posix_cpu_timer_del() and posix_cpu_timer_set() lock_timer(timer); if (timer->task == NULL) return; read_lock(tasklist); put_task_struct(timer->task) is racy. With this patch timer->task modified and accounted only under timer->it_lock. Sadly, this means that dead task_struct won't be freed until timer deleted or armed. 2. run_posix_cpu_timers() collects expired timers into local list under tasklist + ->sighand again. That means that posix_cpu_timer_del() should check timer->it.cpu.firing under these locks too. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index d30b304..30ab39a 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -380,14 +380,9 @@ int posix_cpu_timer_create(struct k_itimer *new_timer) int posix_cpu_timer_del(struct k_itimer *timer) { struct task_struct *p = timer->it.cpu.task; + int ret = 0; - if (timer->it.cpu.firing) - return TIMER_RETRY; - - if (unlikely(p == NULL)) - return 0; - - if (!list_empty(&timer->it.cpu.entry)) { + if (likely(p != NULL)) { read_lock(&tasklist_lock); if (unlikely(p->signal == NULL)) { /* @@ -396,18 +391,20 @@ int posix_cpu_timer_del(struct k_itimer *timer) */ BUG_ON(!list_empty(&timer->it.cpu.entry)); } else { - /* - * Take us off the task's timer list. - */ spin_lock(&p->sighand->siglock); - list_del(&timer->it.cpu.entry); + if (timer->it.cpu.firing) + ret = TIMER_RETRY; + else + list_del(&timer->it.cpu.entry); spin_unlock(&p->sighand->siglock); } read_unlock(&tasklist_lock); + + if (!ret) + put_task_struct(p); } - put_task_struct(p); - return 0; + return ret; } /* @@ -424,8 +421,6 @@ static void cleanup_timers(struct list_head *head, cputime_t ptime = cputime_add(utime, stime); list_for_each_entry_safe(timer, next, head, entry) { - put_task_struct(timer->task); - timer->task = NULL; list_del_init(&timer->entry); if (cputime_lt(timer->expires.cpu, ptime)) { timer->expires.cpu = cputime_zero; @@ -437,8 +432,6 @@ static void cleanup_timers(struct list_head *head, ++head; list_for_each_entry_safe(timer, next, head, entry) { - put_task_struct(timer->task); - timer->task = NULL; list_del_init(&timer->entry); if (cputime_lt(timer->expires.cpu, utime)) { timer->expires.cpu = cputime_zero; @@ -450,8 +443,6 @@ static void cleanup_timers(struct list_head *head, ++head; list_for_each_entry_safe(timer, next, head, entry) { - put_task_struct(timer->task); - timer->task = NULL; list_del_init(&timer->entry); if (timer->expires.sched < sched_time) { timer->expires.sched = 0; -- cgit v0.10.2 From 3de463c7d9d58f8cf3395268230cb20a4c15bffa Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 24 Oct 2005 14:34:03 +0400 Subject: [PATCH] posix-timers: remove false BUG_ON() from run_posix_cpu_timers() do_exit() clears ->it_##clock##_expires, but nothing prevents another cpu to attach the timer to exiting process after that. After exit_notify() does 'write_unlock_irq(&tasklist_lock)' and before do_exit() calls 'schedule() local timer interrupt can find tsk->exit_state != 0. If that state was EXIT_DEAD (or another cpu does sys_wait4) interrupted task has ->signal == NULL. At this moment exiting task has no pending cpu timers, they were cleaned up in __exit_signal()->posix_cpu_timers_exit{,_group}(), so we can just return from irq. Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/exit.c b/kernel/exit.c index 3b25b18..4897977 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -825,14 +825,6 @@ fastcall NORET_TYPE void do_exit(long code) tsk->flags |= PF_EXITING; - /* - * Make sure we don't try to process any timer firings - * while we are already exiting. - */ - tsk->it_virt_expires = cputime_zero; - tsk->it_prof_expires = cputime_zero; - tsk->it_sched_expires = 0; - if (unlikely(in_atomic())) printk(KERN_INFO "note: %s[%d] exited with preempt_count %d\n", current->comm, current->pid, diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 30ab39a..ccb0468 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1285,30 +1285,30 @@ void run_posix_cpu_timers(struct task_struct *tsk) #undef UNEXPIRED - BUG_ON(tsk->exit_state); - /* * Double-check with locks held. */ read_lock(&tasklist_lock); - spin_lock(&tsk->sighand->siglock); + if (likely(tsk->signal != NULL)) { + spin_lock(&tsk->sighand->siglock); - /* - * Here we take off tsk->cpu_timers[N] and tsk->signal->cpu_timers[N] - * all the timers that are firing, and put them on the firing list. - */ - check_thread_timers(tsk, &firing); - check_process_timers(tsk, &firing); + /* + * Here we take off tsk->cpu_timers[N] and tsk->signal->cpu_timers[N] + * all the timers that are firing, and put them on the firing list. + */ + check_thread_timers(tsk, &firing); + check_process_timers(tsk, &firing); - /* - * We must release these locks before taking any timer's lock. - * There is a potential race with timer deletion here, as the - * siglock now protects our private firing list. We have set - * the firing flag in each timer, so that a deletion attempt - * that gets the timer lock before we do will give it up and - * spin until we've taken care of that timer below. - */ - spin_unlock(&tsk->sighand->siglock); + /* + * We must release these locks before taking any timer's lock. + * There is a potential race with timer deletion here, as the + * siglock now protects our private firing list. We have set + * the firing flag in each timer, so that a deletion attempt + * that gets the timer lock before we do will give it up and + * spin until we've taken care of that timer below. + */ + spin_unlock(&tsk->sighand->siglock); + } read_unlock(&tasklist_lock); /* -- cgit v0.10.2 From ca531a0a5e01e5122f67cb6aca8fcbfc70e18e0b Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 24 Oct 2005 14:36:28 +0400 Subject: [PATCH] posix-timers: exit path cleanup No need to rebalance when task exited Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index ccb0468..92a0380 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -486,6 +486,9 @@ static void process_timer_rebalance(struct task_struct *p, struct task_struct *t = p; unsigned int nthreads = atomic_read(&p->signal->live); + if (!nthreads) + return; + switch (clock_idx) { default: BUG(); @@ -1160,6 +1163,9 @@ static void check_process_timers(struct task_struct *tsk, unsigned long long sched_left, sched; const unsigned int nthreads = atomic_read(&sig->live); + if (!nthreads) + return; + prof_left = cputime_sub(prof_expires, utime); prof_left = cputime_sub(prof_left, stime); prof_left = cputime_div(prof_left, nthreads); -- cgit v0.10.2 From a69ac4a78d8bd9e1ec478bd7297d4f047fcd44a8 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 24 Oct 2005 18:29:58 +0400 Subject: [PATCH] posix-timers: fix posix_cpu_timer_set() vs run_posix_cpu_timers() race This might be harmless, but looks like a race from code inspection (I was unable to trigger it). I must admit, I don't understand why we can't return TIMER_RETRY after 'spin_unlock(&p->sighand->siglock)' without doing bump_cpu_timer(), but this is what original code does. posix_cpu_timer_set: read_lock(&tasklist_lock); spin_lock(&p->sighand->siglock); list_del_init(&timer->it.cpu.entry); spin_unlock(&p->sighand->siglock); We are probaly deleting the timer from run_posix_cpu_timers's 'firing' local list_head while run_posix_cpu_timers() does list_for_each_safe. Various bad things can happen, for example we can just delete this timer so that list_for_each() will not notice it and run_posix_cpu_timers() will not reset '->firing' flag. In that case, .... if (timer->it.cpu.firing) { read_unlock(&tasklist_lock); timer->it.cpu.firing = -1; return TIMER_RETRY; } sys_timer_settime() goes to 'retry:', calls posix_cpu_timer_set() again, it returns TIMER_RETRY ... Signed-off-by: Oleg Nesterov Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 92a0380..b15462b 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -730,9 +730,15 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, * Disarm any old timer after extracting its expiry time. */ BUG_ON(!irqs_disabled()); + + ret = 0; spin_lock(&p->sighand->siglock); old_expires = timer->it.cpu.expires; - list_del_init(&timer->it.cpu.entry); + if (unlikely(timer->it.cpu.firing)) { + timer->it.cpu.firing = -1; + ret = TIMER_RETRY; + } else + list_del_init(&timer->it.cpu.entry); spin_unlock(&p->sighand->siglock); /* @@ -780,7 +786,7 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, } } - if (unlikely(timer->it.cpu.firing)) { + if (unlikely(ret)) { /* * We are colliding with the timer actually firing. * Punt after filling in the timer's old value, and @@ -788,8 +794,6 @@ int posix_cpu_timer_set(struct k_itimer *timer, int flags, * it as an overrun (thanks to bump_cpu_timer above). */ read_unlock(&tasklist_lock); - timer->it.cpu.firing = -1; - ret = TIMER_RETRY; goto out; } -- cgit v0.10.2 From 10ded9493ec4a566977ed68b65158eba280e61e5 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 24 Oct 2005 17:49:34 +0200 Subject: [PATCH] uml: fix compile failure for TT mode Without this patch, uml compile fails with: LD .tmp_vmlinux1 arch/um/kernel/built-in.o: In function `config_gdb_cb': arch/um/kernel/tt/gdb.c:129: undefined reference to `TASK_EXTERN_PID' Tested on i386, but fix needed on x86_64 too AFAICS. Signed-off-by: Miklos Szeredi Signed-off-by: Linus Torvalds diff --git a/arch/um/include/sysdep-i386/thread.h b/arch/um/include/sysdep-i386/thread.h index e2bd6ba..243fed4 100644 --- a/arch/um/include/sysdep-i386/thread.h +++ b/arch/um/include/sysdep-i386/thread.h @@ -4,7 +4,7 @@ #include #define TASK_DEBUGREGS(task) ((unsigned long *) &(((char *) (task))[HOST_TASK_DEBUGREGS])) -#ifdef CONFIG_MODE_TT +#ifdef UML_CONFIG_MODE_TT #define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID])) #endif diff --git a/arch/um/include/sysdep-x86_64/thread.h b/arch/um/include/sysdep-x86_64/thread.h index 6a76a7f..cbef3e1 100644 --- a/arch/um/include/sysdep-x86_64/thread.h +++ b/arch/um/include/sysdep-x86_64/thread.h @@ -3,7 +3,7 @@ #include -#ifdef CONFIG_MODE_TT +#ifdef UML_CONFIG_MODE_TT #define TASK_EXTERN_PID(task) *((int *) &(((char *) (task))[HOST_TASK_EXTERN_PID])) #endif -- cgit v0.10.2 From d5c5d8fe32a4b9b14363c6031061e98e26da59a2 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 24 Oct 2005 18:16:50 +0200 Subject: [PATCH] ALSA: Fix Oops of suspend/resume with generic drivers The patch fixes Oops from sound drivers using generic platform device but have no suspend/resume callbacks. Signed-off-by: Takashi Iwai Signed-off-by: Linus Torvalds diff --git a/sound/core/init.c b/sound/core/init.c index a570201..c72a791 100644 --- a/sound/core/init.c +++ b/sound/core/init.c @@ -828,7 +828,8 @@ static int snd_generic_suspend(struct device *dev, pm_message_t state, u32 level card = get_snd_generic_card(dev); if (card->power_state == SNDRV_CTL_POWER_D3hot) return 0; - card->pm_suspend(card, PMSG_SUSPEND); + if (card->pm_suspend) + card->pm_suspend(card, PMSG_SUSPEND); snd_power_change_state(card, SNDRV_CTL_POWER_D3hot); return 0; } @@ -843,7 +844,8 @@ static int snd_generic_resume(struct device *dev, u32 level) card = get_snd_generic_card(dev); if (card->power_state == SNDRV_CTL_POWER_D0) return 0; - card->pm_resume(card); + if (card->pm_suspend) + card->pm_resume(card); snd_power_change_state(card, SNDRV_CTL_POWER_D0); return 0; } -- cgit v0.10.2 From c14e2cfc18659c6ca67c2e10417c432eb978d976 Mon Sep 17 00:00:00 2001 From: James Simmons Date: Mon, 24 Oct 2005 21:46:21 +0100 Subject: [PATCH] Return the line length via sysfs for fbdev This small patch returns the stride/line length of the framebuffer via sysfs. Signed-off-by: James Simmons Signed-off-by: Linus Torvalds diff --git a/drivers/video/fbsysfs.c b/drivers/video/fbsysfs.c index 1147b89..007c8e9 100644 --- a/drivers/video/fbsysfs.c +++ b/drivers/video/fbsysfs.c @@ -242,6 +242,13 @@ static ssize_t show_virtual(struct class_device *class_device, char *buf) fb_info->var.yres_virtual); } +static ssize_t show_stride(struct class_device *class_device, char *buf) +{ + struct fb_info *fb_info = + (struct fb_info *)class_get_devdata(class_device); + return snprintf(buf, PAGE_SIZE, "%d\n", fb_info->fix.line_length); +} + /* Format for cmap is "%02x%c%4x%4x%4x\n" */ /* %02x entry %c transp %4x red %4x blue %4x green \n */ /* 256 rows at 16 chars equals 4096, the normal page size */ @@ -432,6 +439,7 @@ static struct class_device_attribute class_device_attrs[] = { __ATTR(pan, S_IRUGO|S_IWUSR, show_pan, store_pan), __ATTR(virtual_size, S_IRUGO|S_IWUSR, show_virtual, store_virtual), __ATTR(name, S_IRUGO, show_name, NULL), + __ATTR(stride, S_IRUGO, show_stride, NULL), }; int fb_init_class_device(struct fb_info *fb_info) -- cgit v0.10.2 From add7b58e7558dd2894f3c17ca8574099fcba5c15 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 24 Oct 2005 22:11:57 +0100 Subject: [SERIAL] support the Exsys EX-4055 4S four-port card Tested by Wolfgang Denk with this device: 00:0f.0 Network controller: PLX Technology, Inc. PCI <-> IOBus Bridge (rev 01) Subsystem: Exsys EX-4055 4S(16C550) RS-232 Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- Signed-off-by: Russell King diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 0e21f58..5da61eb 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -226,8 +226,10 @@ static int __devinit pci_plx9050_init(struct pci_dev *dev) } irq_config = 0x41; - if (dev->vendor == PCI_VENDOR_ID_PANACOM) + if (dev->vendor == PCI_VENDOR_ID_PANACOM || + dev->subsystem_vendor == PCI_SUBVENDOR_ID_EXSYS) { irq_config = 0x43; + } if ((dev->vendor == PCI_VENDOR_ID_PLX) && (dev->device == PCI_DEVICE_ID_PLX_ROMULUS)) { /* @@ -664,6 +666,15 @@ static struct pci_serial_quirk pci_serial_quirks[] = { { .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_9050, + .subvendor = PCI_SUBVENDOR_ID_EXSYS, + .subdevice = PCI_SUBDEVICE_ID_EXSYS_4055, + .init = pci_plx9050_init, + .setup = pci_default_setup, + .exit = __devexit_p(pci_plx9050_exit), + }, + { + .vendor = PCI_VENDOR_ID_PLX, + .device = PCI_DEVICE_ID_PLX_9050, .subvendor = PCI_SUBVENDOR_ID_KEYSPAN, .subdevice = PCI_SUBDEVICE_ID_KEYSPAN_SX2, .init = pci_plx9050_init, @@ -927,6 +938,7 @@ enum pci_board_num_t { pbn_panacom, pbn_panacom2, pbn_panacom4, + pbn_exsys_4055, pbn_plx_romulus, pbn_oxsemi, pbn_intel_i960, @@ -1292,6 +1304,13 @@ static struct pciserial_board pci_boards[] __devinitdata = { .reg_shift = 7, }, + [pbn_exsys_4055] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + /* I think this entry is broken - the first_offset looks wrong --rmk */ [pbn_plx_romulus] = { .flags = FL_BASE2, @@ -1853,6 +1872,10 @@ static struct pci_device_id serial_pci_tbl[] = { PCI_SUBVENDOR_ID_CHASE_PCIRAS, PCI_SUBDEVICE_ID_CHASE_PCIRAS8, 0, 0, pbn_b2_8_460800 }, + { PCI_VENDOR_ID_PLX, PCI_DEVICE_ID_PLX_9050, + PCI_SUBVENDOR_ID_EXSYS, + PCI_SUBDEVICE_ID_EXSYS_4055, 0, 0, + pbn_exsys_4055 }, /* * Megawolf Romulus PCI Serial Card, from Mike Hudson * (Exoray@isys.ca) diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index f74ed94..ca0691c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2696,6 +2696,7 @@ #define PCI_SUBVENDOR_ID_EXSYS 0xd84d #define PCI_SUBDEVICE_ID_EXSYS_4014 0x4014 +#define PCI_SUBDEVICE_ID_EXSYS_4055 0x4055 #define PCI_VENDOR_ID_TIGERJET 0xe159 #define PCI_DEVICE_ID_TIGERJET_300 0x0001 -- cgit v0.10.2 From 551f8f0e87becb415c522adccab524a7a05ca83a Mon Sep 17 00:00:00 2001 From: Justin Chen Date: Mon, 24 Oct 2005 22:16:38 +0100 Subject: [SERIAL] new hp diva console port Add the new ID 0x132a and configure the new PCI Diva console port. This device supports only 1 single console UART. Signed-off-by: Andrew Morton Signed-off-by: Russell King diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 5da61eb..5c3c039 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -152,6 +152,7 @@ static int __devinit pci_hp_diva_init(struct pci_dev *dev) rc = 4; break; case PCI_DEVICE_ID_HP_DIVA_POWERBAR: + case PCI_DEVICE_ID_HP_DIVA_HURRICANE: rc = 1; break; } diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ca0691c..71834f0 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -723,6 +723,7 @@ #define PCI_DEVICE_ID_HP_DIVA_EVEREST 0x1282 #define PCI_DEVICE_ID_HP_DIVA_AUX 0x1290 #define PCI_DEVICE_ID_HP_DIVA_RMP3 0x1301 +#define PCI_DEVICE_ID_HP_DIVA_HURRICANE 0x132a #define PCI_DEVICE_ID_HP_CISS 0x3210 #define PCI_DEVICE_ID_HP_CISSA 0x3220 #define PCI_DEVICE_ID_HP_CISSB 0x3222 -- cgit v0.10.2 From c34e152a494c0de8d920b70163d95235a51f4120 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Mon, 24 Oct 2005 22:30:10 +0100 Subject: [ARM] fix sharp zaurus c-3000 compile failure without CONFIG_FB_PXA This fixes compile problem when CONFIG_FB_PXA is not set. LD .tmp_vmlinux1 arch/arm/mach-pxa/built-in.o(.text+0x1d74): In function `spitz_get_hsync_len': : undefined reference to `pxafb_get_hsync_time' make: *** [.tmp_vmlinux1] Error 1 3.46user 0.46system 5.10 (0m5.106s) elapsed 77.01%CPU Signed-off-by: Pavel Machek Signed-off-by: Richard Purdie Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/corgi_lcd.c b/arch/arm/mach-pxa/corgi_lcd.c index 850538f..370df11 100644 --- a/arch/arm/mach-pxa/corgi_lcd.c +++ b/arch/arm/mach-pxa/corgi_lcd.c @@ -488,6 +488,7 @@ static int is_pxafb_device(struct device * dev, void * data) unsigned long spitz_get_hsync_len(void) { +#ifdef CONFIG_FB_PXA if (!spitz_pxafb_dev) { spitz_pxafb_dev = bus_find_device(&platform_bus_type, NULL, NULL, is_pxafb_device); if (!spitz_pxafb_dev) @@ -496,6 +497,7 @@ unsigned long spitz_get_hsync_len(void) if (!get_hsync_time) get_hsync_time = symbol_get(pxafb_get_hsync_time); if (!get_hsync_time) +#endif return 0; return pxafb_get_hsync_time(spitz_pxafb_dev); -- cgit v0.10.2 From 0db9ae4a79381a5a3d272ccb51851c48c4bcbb6d Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Mon, 24 Oct 2005 23:05:58 -0700 Subject: [PATCH] alpha: atomic dependency fix My alpha build is exploding because asm/atomic.h now needs smb_mb(), which is over in the (not included) system.h. I fear what will happen if I include system.h into atomic.h, so let's put the barriers into their own header file. Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-alpha/atomic.h b/include/asm-alpha/atomic.h index 0b40bad..20ac3d9 100644 --- a/include/asm-alpha/atomic.h +++ b/include/asm-alpha/atomic.h @@ -1,6 +1,8 @@ #ifndef _ALPHA_ATOMIC_H #define _ALPHA_ATOMIC_H +#include + /* * Atomic operations that C can't guarantee us. Useful for * resource counting etc... diff --git a/include/asm-alpha/barrier.h b/include/asm-alpha/barrier.h new file mode 100644 index 0000000..229c83f --- /dev/null +++ b/include/asm-alpha/barrier.h @@ -0,0 +1,34 @@ +#ifndef __BARRIER_H +#define __BARRIER_H + +#define mb() \ +__asm__ __volatile__("mb": : :"memory") + +#define rmb() \ +__asm__ __volatile__("mb": : :"memory") + +#define wmb() \ +__asm__ __volatile__("wmb": : :"memory") + +#define read_barrier_depends() \ +__asm__ __volatile__("mb": : :"memory") + +#ifdef CONFIG_SMP +#define smp_mb() mb() +#define smp_rmb() rmb() +#define smp_wmb() wmb() +#define smp_read_barrier_depends() read_barrier_depends() +#else +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() barrier() +#endif + +#define set_mb(var, value) \ +do { var = value; mb(); } while (0) + +#define set_wmb(var, value) \ +do { var = value; wmb(); } while (0) + +#endif /* __BARRIER_H */ diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h index bdb4d66..050e86d 100644 --- a/include/asm-alpha/system.h +++ b/include/asm-alpha/system.h @@ -4,6 +4,7 @@ #include #include #include +#include /* * System defines.. Note that this is included both from .c and .S @@ -139,36 +140,6 @@ extern void halt(void) __attribute__((noreturn)); struct task_struct; extern struct task_struct *alpha_switch_to(unsigned long, struct task_struct*); -#define mb() \ -__asm__ __volatile__("mb": : :"memory") - -#define rmb() \ -__asm__ __volatile__("mb": : :"memory") - -#define wmb() \ -__asm__ __volatile__("wmb": : :"memory") - -#define read_barrier_depends() \ -__asm__ __volatile__("mb": : :"memory") - -#ifdef CONFIG_SMP -#define smp_mb() mb() -#define smp_rmb() rmb() -#define smp_wmb() wmb() -#define smp_read_barrier_depends() read_barrier_depends() -#else -#define smp_mb() barrier() -#define smp_rmb() barrier() -#define smp_wmb() barrier() -#define smp_read_barrier_depends() barrier() -#endif - -#define set_mb(var, value) \ -do { var = value; mb(); } while (0) - -#define set_wmb(var, value) \ -do { var = value; wmb(); } while (0) - #define imb() \ __asm__ __volatile__ ("call_pal %0 #imb" : : "i" (PAL_imb) : "memory") -- cgit v0.10.2 From 444d1d9bb5b724f03344c9317bc01d54a9b39073 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 25 Oct 2005 11:00:56 -0700 Subject: [PATCH] qlogic lockup fix If qla2x00_probe_one()'s call to qla2x00_iospace_config() fails, we call qla2x00_free_device() to clean up. But because ha->dpc_pid hasn't been set yet, qla2x00_free_device() tries to stop a kernel thread which hasn't started yet. It does wait_for_completion() against an uninitialised completion struct and the kernel hangs up. Fix it by initialising ha->dpc_pid a bit earlier. Cc: Andrew Vasquez Cc: James Bottomley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 8982978..7aec93f 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1325,6 +1325,8 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) ha->brd_info = brd_info; sprintf(ha->host_str, "%s_%ld", ha->brd_info->drv_name, ha->host_no); + ha->dpc_pid = -1; + /* Configure PCI I/O space */ ret = qla2x00_iospace_config(ha); if (ret) @@ -1448,7 +1450,6 @@ int qla2x00_probe_one(struct pci_dev *pdev, struct qla_board_info *brd_info) */ spin_lock_init(&ha->mbx_reg_lock); - ha->dpc_pid = -1; init_completion(&ha->dpc_inited); init_completion(&ha->dpc_exited); -- cgit v0.10.2 From 4ea6a8046bb49d43c950898f0cb4e1994ef6c89d Mon Sep 17 00:00:00 2001 From: Yan Zheng Date: Mon, 24 Oct 2005 19:55:23 +0800 Subject: [IPV6]: Fix refcnt of struct ip6_flowlabel Signed-off-by: Yan Zheng Acked-by: YOSHIFUJI Hideaki Signed-off-by: Arnaldo Carvalho de Melo diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index f841bde..bbbe80c 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -483,7 +483,7 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen) goto done; } fl1 = sfl->fl; - atomic_inc(&fl->users); + atomic_inc(&fl1->users); break; } } -- cgit v0.10.2 From 5ac660ee1334b401450280cd282113b2c18398f5 Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Sun, 23 Oct 2005 10:31:45 +0200 Subject: [TR]: Preserve RIF flag even for 2 byte RIF fields. Signed-off-by: Jochen Friedrich Signed-off-by: Arnaldo Carvalho de Melo diff --git a/net/802/tr.c b/net/802/tr.c index 1eaa3d1..afd8385 100644 --- a/net/802/tr.c +++ b/net/802/tr.c @@ -340,9 +340,10 @@ static void tr_add_rif_info(struct trh_hdr *trh, struct net_device *dev) unsigned int hash, rii_p = 0; unsigned long flags; struct rif_cache *entry; - + unsigned char saddr0; spin_lock_irqsave(&rif_lock, flags); + saddr0 = trh->saddr[0]; /* * Firstly see if the entry exists @@ -395,7 +396,6 @@ printk("adding rif_entry: addr:%02X:%02X:%02X:%02X:%02X:%02X rcf:%04X\n", entry->rcf = trh->rcf & htons((unsigned short)~TR_RCF_BROADCAST_MASK); memcpy(&(entry->rseg[0]),&(trh->rseg[0]),8*sizeof(unsigned short)); entry->local_ring = 0; - trh->saddr[0]|=TR_RII; /* put the routing indicator back for tcpdump */ } else { @@ -422,6 +422,7 @@ printk("updating rif_entry: addr:%02X:%02X:%02X:%02X:%02X:%02X rcf:%04X\n", } entry->last_used=jiffies; } + trh->saddr[0]=saddr0; /* put the routing indicator back for tcpdump */ spin_unlock_irqrestore(&rif_lock, flags); } -- cgit v0.10.2 From 5ed688a7162ff8d28d7cf98b34a1f825e4c2c2ac Mon Sep 17 00:00:00 2001 From: Jochen Friedrich Date: Sun, 23 Oct 2005 10:33:52 +0200 Subject: [LLC]: Strip RIF flag from source MAC address Signed-off-by: Jochen Friedrich Signed-off-by: Arnaldo Carvalho de Melo diff --git a/include/net/llc_pdu.h b/include/net/llc_pdu.h index f45c37d..c7a9594 100644 --- a/include/net/llc_pdu.h +++ b/include/net/llc_pdu.h @@ -254,8 +254,10 @@ static inline void llc_pdu_decode_sa(struct sk_buff *skb, u8 *sa) { if (skb->protocol == ntohs(ETH_P_802_2)) memcpy(sa, eth_hdr(skb)->h_source, ETH_ALEN); - else if (skb->protocol == ntohs(ETH_P_TR_802_2)) + else if (skb->protocol == ntohs(ETH_P_TR_802_2)) { memcpy(sa, tr_hdr(skb)->saddr, ETH_ALEN); + *sa &= 0x7F; + } } /** -- cgit v0.10.2 From 6693e74a16ef563960764bd963f1048392135c3c Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 25 Oct 2005 20:40:09 -0700 Subject: PCI: be more verbose about resource quirks When reserving an PCI quirk, note that in the kernel bootup messages. Also, parse the strange PIIX4 device resources - they should get their own PCI resource quirks, but for now just print out what it finds to verify that the code does the right thing. Signed-off-by: Linus Torvalds diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a6a630a..7992bc8 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -241,7 +241,8 @@ static void __devinit quirk_s3_64M(struct pci_dev *dev) DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_868, quirk_s3_64M ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_S3, PCI_DEVICE_ID_S3_968, quirk_s3_64M ); -static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsigned size, int nr) +static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, + unsigned size, int nr, const char *name) { region &= ~(size-1); if (region) { @@ -259,6 +260,7 @@ static void __devinit quirk_io_region(struct pci_dev *dev, unsigned region, unsi pcibios_bus_to_resource(dev, res, &bus_region); pci_claim_resource(dev, nr); + printk("PCI quirk: region %04x-%04x claimed by %s\n", region, region + size - 1, name); } } @@ -291,25 +293,98 @@ static void __devinit quirk_ali7101_acpi(struct pci_dev *dev) u16 region; pci_read_config_word(dev, 0xE0, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "ali7101 ACPI"); pci_read_config_word(dev, 0xE2, ®ion); - quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1); + quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "ali7101 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M7101, quirk_ali7101_acpi ); +static void piix4_io_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) +{ + u32 devres; + u32 mask, size, base; + + pci_read_config_dword(dev, port, &devres); + if ((devres & enable) != enable) + return; + mask = (devres >> 16) & 15; + base = devres & 0xffff; + size = 16; + for (;;) { + unsigned bit = size >> 1; + if ((bit & mask) == bit) + break; + size = bit; + } + /* + * For now we only print it out. Eventually we'll want to + * reserve it (at least if it's in the 0x1000+ range), but + * let's get enough confirmation reports first. + */ + base &= -size; + printk("%s PIO at %04x-%04x\n", name, base, base + size - 1); +} + +static void piix4_mem_quirk(struct pci_dev *dev, const char *name, unsigned int port, unsigned int enable) +{ + u32 devres; + u32 mask, size, base; + + pci_read_config_dword(dev, port, &devres); + if ((devres & enable) != enable) + return; + base = devres & 0xffff0000; + mask = (devres & 0x3f) << 16; + size = 128 << 16; + for (;;) { + unsigned bit = size >> 1; + if ((bit & mask) == bit) + break; + size = bit; + } + /* + * For now we only print it out. Eventually we'll want to + * reserve it, but let's get enough confirmation reports first. + */ + base &= -size; + printk("%s MMIO at %04x-%04x\n", name, base, base + size - 1); +} + /* * PIIX4 ACPI: Two IO regions pointed to by longwords at * 0x40 (64 bytes of ACPI registers) * 0x90 (32 bytes of SMB registers) + * and a few strange programmable PIIX4 device resources. */ static void __devinit quirk_piix4_acpi(struct pci_dev *dev) { - u32 region; + u32 region, res_a; pci_read_config_dword(dev, 0x40, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES, "PIIX4 ACPI"); pci_read_config_dword(dev, 0x90, ®ion); - quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1); + quirk_io_region(dev, region, 32, PCI_BRIDGE_RESOURCES+1, "PIIX4 SMB"); + + /* Device resource A has enables for some of the other ones */ + pci_read_config_dword(dev, 0x5c, &res_a); + + piix4_io_quirk(dev, "PIIX4 devres B", 0x60, 3 << 21); + piix4_io_quirk(dev, "PIIX4 devres C", 0x64, 3 << 21); + + /* Device resource D is just bitfields for static resources */ + + /* Device 12 enabled? */ + if (res_a & (1 << 29)) { + piix4_io_quirk(dev, "PIIX4 devres E", 0x68, 1 << 20); + piix4_mem_quirk(dev, "PIIX4 devres F", 0x6c, 1 << 7); + } + /* Device 13 enabled? */ + if (res_a & (1 << 30)) { + piix4_io_quirk(dev, "PIIX4 devres G", 0x70, 1 << 20); + piix4_mem_quirk(dev, "PIIX4 devres H", 0x74, 1 << 7); + } + piix4_io_quirk(dev, "PIIX4 devres I", 0x78, 1 << 20); + piix4_io_quirk(dev, "PIIX4 devres J", 0x7c, 1 << 20); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82371AB_3, quirk_piix4_acpi ); @@ -323,10 +398,10 @@ static void __devinit quirk_ich4_lpc_acpi(struct pci_dev *dev) u32 region; pci_read_config_dword(dev, 0x40, ®ion); - quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 128, PCI_BRIDGE_RESOURCES, "ICH4 ACPI/GPIO/TCO"); pci_read_config_dword(dev, 0x58, ®ion); - quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1); + quirk_io_region(dev, region, 64, PCI_BRIDGE_RESOURCES+1, "ICH4 GPIO"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0, quirk_ich4_lpc_acpi ); DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0, quirk_ich4_lpc_acpi ); @@ -352,7 +427,7 @@ static void __devinit quirk_vt82c586_acpi(struct pci_dev *dev) if (rev & 0x10) { pci_read_config_dword(dev, 0x48, ®ion); region &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, region, 256, PCI_BRIDGE_RESOURCES, "vt82c586 ACPI"); } } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C586_3, quirk_vt82c586_acpi ); @@ -372,11 +447,11 @@ static void __devinit quirk_vt82c686_acpi(struct pci_dev *dev) pci_read_config_word(dev, 0x70, &hm); hm &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1); + quirk_io_region(dev, hm, 128, PCI_BRIDGE_RESOURCES + 1, "vt82c868 HW-mon"); pci_read_config_dword(dev, 0x90, &smb); smb &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2); + quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 2, "vt82c868 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_82C686_4, quirk_vt82c686_acpi ); @@ -391,11 +466,11 @@ static void __devinit quirk_vt8235_acpi(struct pci_dev *dev) pci_read_config_word(dev, 0x88, &pm); pm &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES); + quirk_io_region(dev, pm, 128, PCI_BRIDGE_RESOURCES, "vt8235 PM"); pci_read_config_word(dev, 0xd0, &smb); smb &= PCI_BASE_ADDRESS_IO_MASK; - quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1); + quirk_io_region(dev, smb, 16, PCI_BRIDGE_RESOURCES + 1, "vt8235 SMB"); } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_8235, quirk_vt8235_acpi); -- cgit v0.10.2 From 7edc24c4d1924e79d3853a8d7563bcce73f31e5d Mon Sep 17 00:00:00 2001 From: Ian Campbell Date: Wed, 26 Oct 2005 15:04:21 +0100 Subject: [ARM] 3032/1: sparse: complains about generic_fls() prototype in asm-arm/bitops.h Patch from Ian Campbell Sparse complains about the definition of generic_fls in asm-arm/bitops.h: CHECK /home/icampbell/devel/kernel/2.6/arch/arm/mach-pxa/viper.c include2/asm/bitops.h:350:34: error: marked inline, but without a definition The definition is unnecessary since linux/bitops.h defines generic_fls before including asm/bitops.h and asm/bitops.h should not be included directly. There are still some places where asm/bitops.h is directly included, but I think that code should be fixed. I was a little wary of the patch for this reason but lubbock, mainstone and assabet all build OK and so do my in house boards... ARM is the only arch with the generic_fls prototype in this way. Signed-off-by: Ian Campbell Signed-off-by: Russell King diff --git a/include/asm-arm/bitops.h b/include/asm-arm/bitops.h index aad7aad..e007dd9 100644 --- a/include/asm-arm/bitops.h +++ b/include/asm-arm/bitops.h @@ -347,7 +347,6 @@ static inline unsigned long __ffs(unsigned long word) * the clz instruction for much better code efficiency. */ -static __inline__ int generic_fls(int x); #define fls(x) \ ( __builtin_constant_p(x) ? generic_fls(x) : \ ({ int __r; asm("clz\t%0, %1" : "=r"(__r) : "r"(x) : "cc"); 32-__r; }) ) -- cgit v0.10.2 From 8712e553562bbbed9b3a99370f08e9bc25908a76 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Wed, 26 Oct 2005 01:58:58 -0700 Subject: [PATCH] md: make sure mdthreads will always respond to kthread_stop There are still a couple of cases where md threads (the resync/recovery thread) is not interruptible since the change to use kthreads. All places there it tests "signal_pending", it should also test kthread_should_stop, as with this patch. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index e947607..2a8a569 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3568,7 +3568,8 @@ static void md_do_sync(mddev_t *mddev) mddev->curr_resync = 2; try_again: - if (signal_pending(current)) { + if (signal_pending(current) || + kthread_should_stop()) { flush_signals(current); set_bit(MD_RECOVERY_INTR, &mddev->recovery); goto skip; @@ -3590,8 +3591,9 @@ static void md_do_sync(mddev_t *mddev) */ continue; prepare_to_wait(&resync_wait, &wq, TASK_INTERRUPTIBLE); - if (!signal_pending(current) - && mddev2->curr_resync >= mddev->curr_resync) { + if (!signal_pending(current) && + !kthread_should_stop() && + mddev2->curr_resync >= mddev->curr_resync) { printk(KERN_INFO "md: delaying resync of %s" " until %s has finished resync (they" " share one or more physical units)\n", @@ -3697,7 +3699,7 @@ static void md_do_sync(mddev_t *mddev) } - if (signal_pending(current)) { + if (signal_pending(current) || kthread_should_stop()) { /* * got a signal, exit. */ -- cgit v0.10.2 From 1c6fe9465941df04a1ad8f009bd6d95b20072a58 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Wed, 26 Oct 2005 01:58:59 -0700 Subject: [PATCH] NUMA: broken per cpu pageset counters The NUMA counters in struct per_cpu_pageset (linux/mmzone.h) are never cleared today. This works ok for CPU 0 on NUMA machines because boot_pageset[] is already zero, but for other CPU:s this results in uninitialized counters. Signed-off-by: Magnus Damm Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index cc1fe26..e1d3d77 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1750,6 +1750,8 @@ inline void setup_pageset(struct per_cpu_pageset *p, unsigned long batch) { struct per_cpu_pages *pcp; + memset(p, 0, sizeof(*p)); + pcp = &p->pcp[0]; /* hot */ pcp->count = 0; pcp->low = 2 * batch; -- cgit v0.10.2 From 958d24df82e021704437da0789c47fcf581e4b85 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 26 Oct 2005 01:59:00 -0700 Subject: [PATCH] ppc64: Fix wrong register mapping in mpic driver The mpic interrupt controller driver (used on G5 and early pSeries among others) has a bug where it doesn't get the right virtual address for the timer registers. It causes the driver to poke at the MMIO space of whatever has been mapped just next to it (ouch !) when initializing and causes boot failures on some IBM machines. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/ppc64/kernel/mpic.c b/arch/ppc64/kernel/mpic.c index cc262a0..5f5bc73 100644 --- a/arch/ppc64/kernel/mpic.c +++ b/arch/ppc64/kernel/mpic.c @@ -506,8 +506,8 @@ struct mpic * __init mpic_alloc(unsigned long phys_addr, mpic->senses_count = senses_count; /* Map the global registers */ - mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x1000); - mpic->tmregs = mpic->gregs + (MPIC_TIMER_BASE >> 2); + mpic->gregs = ioremap(phys_addr + MPIC_GREG_BASE, 0x2000); + mpic->tmregs = mpic->gregs + ((MPIC_TIMER_BASE - MPIC_GREG_BASE) >> 2); BUG_ON(mpic->gregs == NULL); /* Reset */ -- cgit v0.10.2 From bb32051532fed727de0d513a9a578b54c0b7ea5a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 26 Oct 2005 01:59:01 -0700 Subject: [PATCH] export cpu_online_map With CONFIG_SMP=n: *** Warning: "cpu_online_map" [drivers/firmware/dcdbas.ko] undefined! due to set_cpus_allowed(). Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sched.c b/kernel/sched.c index 1f31a52..1e5cafd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -3879,6 +3879,7 @@ EXPORT_SYMBOL(cpu_present_map); #ifndef CONFIG_SMP cpumask_t cpu_online_map = CPU_MASK_ALL; +EXPORT_SYMBOL_GPL(cpu_online_map); cpumask_t cpu_possible_map = CPU_MASK_ALL; #endif -- cgit v0.10.2 From 35848e048f55368f132e28e7f3278ce2d2347f6c Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 26 Oct 2005 01:59:01 -0700 Subject: [PATCH] kill massive wireless-related log spam Although this message is having the intended effect of causing wireless driver maintainers to upgrade their code, I never should have merged this patch in its present form. Leading to tons of bug reports and unhappy users. Some wireless apps poll for statistics regularly, which leads to a printk() every single time they ask for stats. That's a little bit _too_ much of a reminder that the driver is using an old API. Change this to printing out the message once, per kernel boot. Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/net/core/wireless.c b/net/core/wireless.c index d17f158..271ddb3 100644 --- a/net/core/wireless.c +++ b/net/core/wireless.c @@ -455,10 +455,15 @@ static inline struct iw_statistics *get_wireless_stats(struct net_device *dev) /* Old location, field to be removed in next WE */ if(dev->get_wireless_stats) { - printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n", - dev->name); + static int printed_message; + + if (!printed_message++) + printk(KERN_DEBUG "%s (WE) : Driver using old /proc/net/wireless support, please fix driver !\n", + dev->name); + return dev->get_wireless_stats(dev); } + /* Not found */ return (struct iw_statistics *) NULL; } -- cgit v0.10.2 From 94c1d3184523efa7109472eb393cee6e954c5d75 Mon Sep 17 00:00:00 2001 From: Peter Wainwright Date: Wed, 26 Oct 2005 01:59:02 -0700 Subject: [PATCH] Fix HFS+ to free up the space when a file is deleted. fsck_hfs reveals lots of temporary files accumulating in the hidden directory "\000\000\000HFS+ Private Data". According to the HFS+ documentation these are files which are unlinked while in use. However, there may be a bug in the Linux hfsplus implementation which causes this to happen even when the files are not in use. It looks like the "opencnt" field is never initialized as (I think) it should be in hfsplus_read_inode. This means that a file can appear to be still in use when in fact it has been closed. This patch seems to fix it for me. Signed-off-by: Anton Altaparmakov Cc: Roman Zippel Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c index fd0f0f0..452fc1f 100644 --- a/fs/hfsplus/super.c +++ b/fs/hfsplus/super.c @@ -50,6 +50,7 @@ static void hfsplus_read_inode(struct inode *inode) init_MUTEX(&HFSPLUS_I(inode).extents_lock); HFSPLUS_I(inode).flags = 0; HFSPLUS_I(inode).rsrc_inode = NULL; + atomic_set(&HFSPLUS_I(inode).opencnt, 0); if (inode->i_ino >= HFSPLUS_FIRSTUSER_CNID) { read_inode: -- cgit v0.10.2 From 4bcde03d41d2264edb4ea3c47cb27da1e2609e48 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 26 Oct 2005 01:59:03 -0700 Subject: [PATCH] svcsock timestamp fix Convert nanoseconds to microseconds correctly. Spotted by Steve Dickson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/net/sunrpc/svcsock.c b/net/sunrpc/svcsock.c index 30ec3ef..691dea4 100644 --- a/net/sunrpc/svcsock.c +++ b/net/sunrpc/svcsock.c @@ -587,7 +587,7 @@ svc_udp_recvfrom(struct svc_rqst *rqstp) struct timeval tv; tv.tv_sec = xtime.tv_sec; - tv.tv_usec = xtime.tv_nsec * 1000; + tv.tv_usec = xtime.tv_nsec / NSEC_PER_USEC; skb_set_timestamp(skb, &tv); /* Don't enable netstamp, sunrpc doesn't need that much accuracy */ -- cgit v0.10.2 From b0917bd912d3708c50e1df1b5e1648d0547108a3 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Wed, 26 Oct 2005 11:05:25 +0100 Subject: [PATCH] fix radeon_cp_init_ring_buffer() I've seen similar failure on alpha. Obviously, someone forgot to convert sg->handle stuff for PCI gart case. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 6d9080a..12ef13f 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1133,10 +1133,10 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev, ring_start = (dev_priv->cp_ring->offset - dev->agp->base + dev_priv->gart_vm_start); - } else + } else #endif ring_start = (dev_priv->cp_ring->offset - - dev->sg->handle + - (unsigned long)dev->sg->virtual + dev_priv->gart_vm_start); RADEON_WRITE( RADEON_CP_RB_BASE, ring_start ); @@ -1164,7 +1164,8 @@ static void radeon_cp_init_ring_buffer( drm_device_t *dev, drm_sg_mem_t *entry = dev->sg; unsigned long tmp_ofs, page_ofs; - tmp_ofs = dev_priv->ring_rptr->offset - dev->sg->handle; + tmp_ofs = dev_priv->ring_rptr->offset - + (unsigned long)dev->sg->virtual; page_ofs = tmp_ofs >> PAGE_SHIFT; RADEON_WRITE( RADEON_CP_RB_RPTR_ADDR, @@ -1491,8 +1492,8 @@ static int radeon_do_init_cp( drm_device_t *dev, drm_radeon_init_t *init ) else #endif dev_priv->gart_buffers_offset = (dev->agp_buffer_map->offset - - dev->sg->handle - + dev_priv->gart_vm_start); + - (unsigned long)dev->sg->virtual + + dev_priv->gart_vm_start); DRM_DEBUG( "dev_priv->gart_size %d\n", dev_priv->gart_size ); -- cgit v0.10.2 From 70ab81c2ed3d1323e7d6805bf59cbb570dff7937 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 26 Oct 2005 11:23:06 -0700 Subject: posix cpu timers: fix timer ordering Pointed out by Oleg Nesterov, who has been walking over the code forwards and backwards. Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index b15462b..2f86424 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -576,17 +576,15 @@ static void arm_timer(struct k_itimer *timer, union cpu_time_count now) listpos = head; if (CPUCLOCK_WHICH(timer->it_clock) == CPUCLOCK_SCHED) { list_for_each_entry(next, head, entry) { - if (next->expires.sched > nt->expires.sched) { - listpos = &next->entry; + if (next->expires.sched > nt->expires.sched) break; - } + listpos = &next->entry; } } else { list_for_each_entry(next, head, entry) { - if (cputime_gt(next->expires.cpu, nt->expires.cpu)) { - listpos = &next->entry; + if (cputime_gt(next->expires.cpu, nt->expires.cpu)) break; - } + listpos = &next->entry; } } list_add(&nt->entry, listpos); -- cgit v0.10.2 From 7a4ed937aa44acdeb8c6ba671509dc7b54b09d3a Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Wed, 26 Oct 2005 20:26:53 +0400 Subject: [PATCH] Fix cpu timers expiration time There's a silly off-by-one error in the code that updates the expiration of posix CPU timers, causing them to not be properly updated when they hit exactly on their expiration time (which should be the normal case). This causes them to then fire immediately again, and only _then_ get properly updated. Signed-off-by: Linus Torvalds diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 2f86424..383ba22 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -91,7 +91,7 @@ static inline union cpu_time_count cpu_time_sub(clockid_t which_clock, * Update expiry time from increment, and increase overrun count, * given the current clock sample. */ -static inline void bump_cpu_timer(struct k_itimer *timer, +static void bump_cpu_timer(struct k_itimer *timer, union cpu_time_count now) { int i; @@ -110,7 +110,7 @@ static inline void bump_cpu_timer(struct k_itimer *timer, for (i = 0; incr < delta - incr; i++) incr = incr << 1; for (; i >= 0; incr >>= 1, i--) { - if (delta <= incr) + if (delta < incr) continue; timer->it.cpu.expires.sched += incr; timer->it_overrun += 1 << i; @@ -128,7 +128,7 @@ static inline void bump_cpu_timer(struct k_itimer *timer, for (i = 0; cputime_lt(incr, cputime_sub(delta, incr)); i++) incr = cputime_add(incr, incr); for (; i >= 0; incr = cputime_halve(incr), i--) { - if (cputime_le(delta, incr)) + if (cputime_lt(delta, incr)) continue; timer->it.cpu.expires.cpu = cputime_add(timer->it.cpu.expires.cpu, incr); -- cgit v0.10.2