From a056ab8c7a00a0ffc52e9573bf01257004c2d08c Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Fri, 16 Apr 2010 19:01:02 +0300 Subject: HSI: hsi: Introducing HSI framework Adds HSI framework in to the linux kernel. High Speed Synchronous Serial Interface (HSI) is a serial interface mainly used for connecting application engines (APE) with cellular modem engines (CMT) in cellular handsets. HSI provides multiplexing for up to 16 logical channels, low-latency and full duplex communication. Signed-off-by: Carlos Chinea Acked-by: Linus Walleij diff --git a/drivers/Kconfig b/drivers/Kconfig index b5e6f24..5289508 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -52,6 +52,8 @@ source "drivers/i2c/Kconfig" source "drivers/spi/Kconfig" +source "drivers/hsi/Kconfig" + source "drivers/pps/Kconfig" source "drivers/ptp/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 1b31421..91077ac 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_ATA) += ata/ obj-$(CONFIG_TARGET_CORE) += target/ obj-$(CONFIG_MTD) += mtd/ obj-$(CONFIG_SPI) += spi/ +obj-y += hsi/ obj-y += net/ obj-$(CONFIG_ATM) += atm/ obj-$(CONFIG_FUSION) += message/ diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig new file mode 100644 index 0000000..937062e --- /dev/null +++ b/drivers/hsi/Kconfig @@ -0,0 +1,17 @@ +# +# HSI driver configuration +# +menuconfig HSI + tristate "HSI support" + ---help--- + The "High speed synchronous Serial Interface" is + synchronous serial interface used mainly to connect + application engines and cellular modems. + +if HSI + +config HSI_BOARDINFO + bool + default y + +endif # HSI diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile new file mode 100644 index 0000000..ed94a3a --- /dev/null +++ b/drivers/hsi/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for HSI +# +obj-$(CONFIG_HSI_BOARDINFO) += hsi_boardinfo.o +obj-$(CONFIG_HSI) += hsi.o diff --git a/drivers/hsi/hsi.c b/drivers/hsi/hsi.c new file mode 100644 index 0000000..4e2d79b --- /dev/null +++ b/drivers/hsi/hsi.c @@ -0,0 +1,494 @@ +/* + * HSI core. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include "hsi_core.h" + +static struct device_type hsi_ctrl = { + .name = "hsi_controller", +}; + +static struct device_type hsi_cl = { + .name = "hsi_client", +}; + +static struct device_type hsi_port = { + .name = "hsi_port", +}; + +static ssize_t modalias_show(struct device *dev, + struct device_attribute *a __maybe_unused, char *buf) +{ + return sprintf(buf, "hsi:%s\n", dev_name(dev)); +} + +static struct device_attribute hsi_bus_dev_attrs[] = { + __ATTR_RO(modalias), + __ATTR_NULL, +}; + +static int hsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) +{ + if (dev->type == &hsi_cl) + add_uevent_var(env, "MODALIAS=hsi:%s", dev_name(dev)); + + return 0; +} + +static int hsi_bus_match(struct device *dev, struct device_driver *driver) +{ + return strcmp(dev_name(dev), driver->name) == 0; +} + +static struct bus_type hsi_bus_type = { + .name = "hsi", + .dev_attrs = hsi_bus_dev_attrs, + .match = hsi_bus_match, + .uevent = hsi_bus_uevent, +}; + +static void hsi_client_release(struct device *dev) +{ + kfree(to_hsi_client(dev)); +} + +static void hsi_new_client(struct hsi_port *port, struct hsi_board_info *info) +{ + struct hsi_client *cl; + unsigned long flags; + + cl = kzalloc(sizeof(*cl), GFP_KERNEL); + if (!cl) + return; + cl->device.type = &hsi_cl; + cl->tx_cfg = info->tx_cfg; + cl->rx_cfg = info->rx_cfg; + cl->device.bus = &hsi_bus_type; + cl->device.parent = &port->device; + cl->device.release = hsi_client_release; + dev_set_name(&cl->device, info->name); + cl->device.platform_data = info->platform_data; + spin_lock_irqsave(&port->clock, flags); + list_add_tail(&cl->link, &port->clients); + spin_unlock_irqrestore(&port->clock, flags); + if (info->archdata) + cl->device.archdata = *info->archdata; + if (device_register(&cl->device) < 0) { + pr_err("hsi: failed to register client: %s\n", info->name); + kfree(cl); + } +} + +static void hsi_scan_board_info(struct hsi_controller *hsi) +{ + struct hsi_cl_info *cl_info; + struct hsi_port *p; + + list_for_each_entry(cl_info, &hsi_board_list, list) + if (cl_info->info.hsi_id == hsi->id) { + p = hsi_find_port_num(hsi, cl_info->info.port); + if (!p) + continue; + hsi_new_client(p, &cl_info->info); + } +} + +static int hsi_remove_client(struct device *dev, void *data __maybe_unused) +{ + struct hsi_client *cl = to_hsi_client(dev); + struct hsi_port *port = to_hsi_port(dev->parent); + unsigned long flags; + + spin_lock_irqsave(&port->clock, flags); + list_del(&cl->link); + spin_unlock_irqrestore(&port->clock, flags); + device_unregister(dev); + + return 0; +} + +static int hsi_remove_port(struct device *dev, void *data __maybe_unused) +{ + device_for_each_child(dev, NULL, hsi_remove_client); + device_unregister(dev); + + return 0; +} + +static void hsi_controller_release(struct device *dev __maybe_unused) +{ +} + +static void hsi_port_release(struct device *dev __maybe_unused) +{ +} + +/** + * hsi_unregister_controller - Unregister an HSI controller + * @hsi: The HSI controller to register + */ +void hsi_unregister_controller(struct hsi_controller *hsi) +{ + device_for_each_child(&hsi->device, NULL, hsi_remove_port); + device_unregister(&hsi->device); +} +EXPORT_SYMBOL_GPL(hsi_unregister_controller); + +/** + * hsi_register_controller - Register an HSI controller and its ports + * @hsi: The HSI controller to register + * + * Returns -errno on failure, 0 on success. + */ +int hsi_register_controller(struct hsi_controller *hsi) +{ + unsigned int i; + int err; + + hsi->device.type = &hsi_ctrl; + hsi->device.bus = &hsi_bus_type; + hsi->device.release = hsi_controller_release; + err = device_register(&hsi->device); + if (err < 0) + return err; + for (i = 0; i < hsi->num_ports; i++) { + hsi->port[i].device.parent = &hsi->device; + hsi->port[i].device.bus = &hsi_bus_type; + hsi->port[i].device.release = hsi_port_release; + hsi->port[i].device.type = &hsi_port; + INIT_LIST_HEAD(&hsi->port[i].clients); + spin_lock_init(&hsi->port[i].clock); + err = device_register(&hsi->port[i].device); + if (err < 0) + goto out; + } + /* Populate HSI bus with HSI clients */ + hsi_scan_board_info(hsi); + + return 0; +out: + hsi_unregister_controller(hsi); + + return err; +} +EXPORT_SYMBOL_GPL(hsi_register_controller); + +/** + * hsi_register_client_driver - Register an HSI client to the HSI bus + * @drv: HSI client driver to register + * + * Returns -errno on failure, 0 on success. + */ +int hsi_register_client_driver(struct hsi_client_driver *drv) +{ + drv->driver.bus = &hsi_bus_type; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(hsi_register_client_driver); + +static inline int hsi_dummy_msg(struct hsi_msg *msg __maybe_unused) +{ + return 0; +} + +static inline int hsi_dummy_cl(struct hsi_client *cl __maybe_unused) +{ + return 0; +} + +/** + * hsi_alloc_controller - Allocate an HSI controller and its ports + * @n_ports: Number of ports on the HSI controller + * @flags: Kernel allocation flags + * + * Return NULL on failure or a pointer to an hsi_controller on success. + */ +struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags) +{ + struct hsi_controller *hsi; + struct hsi_port *port; + unsigned int i; + + if (!n_ports) + return NULL; + + port = kzalloc(sizeof(*port)*n_ports, flags); + if (!port) + return NULL; + hsi = kzalloc(sizeof(*hsi), flags); + if (!hsi) + goto out; + for (i = 0; i < n_ports; i++) { + dev_set_name(&port[i].device, "port%d", i); + port[i].num = i; + port[i].async = hsi_dummy_msg; + port[i].setup = hsi_dummy_cl; + port[i].flush = hsi_dummy_cl; + port[i].start_tx = hsi_dummy_cl; + port[i].stop_tx = hsi_dummy_cl; + port[i].release = hsi_dummy_cl; + mutex_init(&port[i].lock); + } + hsi->num_ports = n_ports; + hsi->port = port; + + return hsi; +out: + kfree(port); + + return NULL; +} +EXPORT_SYMBOL_GPL(hsi_alloc_controller); + +/** + * hsi_free_controller - Free an HSI controller + * @hsi: Pointer to HSI controller + */ +void hsi_free_controller(struct hsi_controller *hsi) +{ + if (!hsi) + return; + + kfree(hsi->port); + kfree(hsi); +} +EXPORT_SYMBOL_GPL(hsi_free_controller); + +/** + * hsi_free_msg - Free an HSI message + * @msg: Pointer to the HSI message + * + * Client is responsible to free the buffers pointed by the scatterlists. + */ +void hsi_free_msg(struct hsi_msg *msg) +{ + if (!msg) + return; + sg_free_table(&msg->sgt); + kfree(msg); +} +EXPORT_SYMBOL_GPL(hsi_free_msg); + +/** + * hsi_alloc_msg - Allocate an HSI message + * @nents: Number of memory entries + * @flags: Kernel allocation flags + * + * nents can be 0. This mainly makes sense for read transfer. + * In that case, HSI drivers will call the complete callback when + * there is data to be read without consuming it. + * + * Return NULL on failure or a pointer to an hsi_msg on success. + */ +struct hsi_msg *hsi_alloc_msg(unsigned int nents, gfp_t flags) +{ + struct hsi_msg *msg; + int err; + + msg = kzalloc(sizeof(*msg), flags); + if (!msg) + return NULL; + + if (!nents) + return msg; + + err = sg_alloc_table(&msg->sgt, nents, flags); + if (unlikely(err)) { + kfree(msg); + msg = NULL; + } + + return msg; +} +EXPORT_SYMBOL_GPL(hsi_alloc_msg); + +/** + * hsi_async - Submit an HSI transfer to the controller + * @cl: HSI client sending the transfer + * @msg: The HSI transfer passed to controller + * + * The HSI message must have the channel, ttype, complete and destructor + * fields set beforehand. If nents > 0 then the client has to initialize + * also the scatterlists to point to the buffers to write to or read from. + * + * HSI controllers relay on pre-allocated buffers from their clients and they + * do not allocate buffers on their own. + * + * Once the HSI message transfer finishes, the HSI controller calls the + * complete callback with the status and actual_len fields of the HSI message + * updated. The complete callback can be called before returning from + * hsi_async. + * + * Returns -errno on failure or 0 on success + */ +int hsi_async(struct hsi_client *cl, struct hsi_msg *msg) +{ + struct hsi_port *port = hsi_get_port(cl); + + if (!hsi_port_claimed(cl)) + return -EACCES; + + WARN_ON_ONCE(!msg->destructor || !msg->complete); + msg->cl = cl; + + return port->async(msg); +} +EXPORT_SYMBOL_GPL(hsi_async); + +/** + * hsi_claim_port - Claim the HSI client's port + * @cl: HSI client that wants to claim its port + * @share: Flag to indicate if the client wants to share the port or not. + * + * Returns -errno on failure, 0 on success. + */ +int hsi_claim_port(struct hsi_client *cl, unsigned int share) +{ + struct hsi_port *port = hsi_get_port(cl); + int err = 0; + + mutex_lock(&port->lock); + if ((port->claimed) && (!port->shared || !share)) { + err = -EBUSY; + goto out; + } + if (!try_module_get(to_hsi_controller(port->device.parent)->owner)) { + err = -ENODEV; + goto out; + } + port->claimed++; + port->shared = !!share; + cl->pclaimed = 1; +out: + mutex_unlock(&port->lock); + + return err; +} +EXPORT_SYMBOL_GPL(hsi_claim_port); + +/** + * hsi_release_port - Release the HSI client's port + * @cl: HSI client which previously claimed its port + */ +void hsi_release_port(struct hsi_client *cl) +{ + struct hsi_port *port = hsi_get_port(cl); + + mutex_lock(&port->lock); + /* Allow HW driver to do some cleanup */ + port->release(cl); + if (cl->pclaimed) + port->claimed--; + BUG_ON(port->claimed < 0); + cl->pclaimed = 0; + if (!port->claimed) + port->shared = 0; + module_put(to_hsi_controller(port->device.parent)->owner); + mutex_unlock(&port->lock); +} +EXPORT_SYMBOL_GPL(hsi_release_port); + +static int hsi_start_rx(struct hsi_client *cl, void *data __maybe_unused) +{ + if (cl->hsi_start_rx) + (*cl->hsi_start_rx)(cl); + + return 0; +} + +static int hsi_stop_rx(struct hsi_client *cl, void *data __maybe_unused) +{ + if (cl->hsi_stop_rx) + (*cl->hsi_stop_rx)(cl); + + return 0; +} + +static int hsi_port_for_each_client(struct hsi_port *port, void *data, + int (*fn)(struct hsi_client *cl, void *data)) +{ + struct hsi_client *cl; + + spin_lock(&port->clock); + list_for_each_entry(cl, &port->clients, link) { + spin_unlock(&port->clock); + (*fn)(cl, data); + spin_lock(&port->clock); + } + spin_unlock(&port->clock); + + return 0; +} + +/** + * hsi_event -Notifies clients about port events + * @port: Port where the event occurred + * @event: The event type + * + * Clients should not be concerned about wake line behavior. However, due + * to a race condition in HSI HW protocol, clients need to be notified + * about wake line changes, so they can implement a workaround for it. + * + * Events: + * HSI_EVENT_START_RX - Incoming wake line high + * HSI_EVENT_STOP_RX - Incoming wake line down + */ +void hsi_event(struct hsi_port *port, unsigned int event) +{ + int (*fn)(struct hsi_client *cl, void *data); + + switch (event) { + case HSI_EVENT_START_RX: + fn = hsi_start_rx; + break; + case HSI_EVENT_STOP_RX: + fn = hsi_stop_rx; + break; + default: + return; + } + hsi_port_for_each_client(port, NULL, fn); +} +EXPORT_SYMBOL_GPL(hsi_event); + +static int __init hsi_init(void) +{ + return bus_register(&hsi_bus_type); +} +postcore_initcall(hsi_init); + +static void __exit hsi_exit(void) +{ + bus_unregister(&hsi_bus_type); +} +module_exit(hsi_exit); + +MODULE_AUTHOR("Carlos Chinea "); +MODULE_DESCRIPTION("High-speed Synchronous Serial Interface (HSI) framework"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/hsi/hsi_boardinfo.c b/drivers/hsi/hsi_boardinfo.c new file mode 100644 index 0000000..e56bc6d --- /dev/null +++ b/drivers/hsi/hsi_boardinfo.c @@ -0,0 +1,62 @@ +/* + * HSI clients registration interface + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include +#include +#include +#include "hsi_core.h" + +/* + * hsi_board_list is only used internally by the HSI framework. + * No one else is allowed to make use of it. + */ +LIST_HEAD(hsi_board_list); +EXPORT_SYMBOL_GPL(hsi_board_list); + +/** + * hsi_register_board_info - Register HSI clients information + * @info: Array of HSI clients on the board + * @len: Length of the array + * + * HSI clients are statically declared and registered on board files. + * + * HSI clients will be automatically registered to the HSI bus once the + * controller and the port where the clients wishes to attach are registered + * to it. + * + * Return -errno on failure, 0 on success. + */ +int __init hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len) +{ + struct hsi_cl_info *cl_info; + + cl_info = kzalloc(sizeof(*cl_info) * len, GFP_KERNEL); + if (!cl_info) + return -ENOMEM; + + for (; len; len--, info++, cl_info++) { + cl_info->info = *info; + list_add_tail(&cl_info->list, &hsi_board_list); + } + + return 0; +} diff --git a/drivers/hsi/hsi_core.h b/drivers/hsi/hsi_core.h new file mode 100644 index 0000000..ab5c2fb --- /dev/null +++ b/drivers/hsi/hsi_core.h @@ -0,0 +1,35 @@ +/* + * HSI framework internal interfaces, + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_HSI_CORE_H__ +#define __LINUX_HSI_CORE_H__ + +#include + +struct hsi_cl_info { + struct list_head list; + struct hsi_board_info info; +}; + +extern struct list_head hsi_board_list; + +#endif /* __LINUX_HSI_CORE_H__ */ diff --git a/include/linux/hsi/hsi.h b/include/linux/hsi/hsi.h new file mode 100644 index 0000000..4b17806 --- /dev/null +++ b/include/linux/hsi/hsi.h @@ -0,0 +1,410 @@ +/* + * HSI core header file. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Carlos Chinea + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef __LINUX_HSI_H__ +#define __LINUX_HSI_H__ + +#include +#include +#include +#include +#include +#include + +/* HSI message ttype */ +#define HSI_MSG_READ 0 +#define HSI_MSG_WRITE 1 + +/* HSI configuration values */ +enum { + HSI_MODE_STREAM = 1, + HSI_MODE_FRAME, +}; + +enum { + HSI_FLOW_SYNC, /* Synchronized flow */ + HSI_FLOW_PIPE, /* Pipelined flow */ +}; + +enum { + HSI_ARB_RR, /* Round-robin arbitration */ + HSI_ARB_PRIO, /* Channel priority arbitration */ +}; + +#define HSI_MAX_CHANNELS 16 + +/* HSI message status codes */ +enum { + HSI_STATUS_COMPLETED, /* Message transfer is completed */ + HSI_STATUS_PENDING, /* Message pending to be read/write (POLL) */ + HSI_STATUS_PROCEEDING, /* Message transfer is ongoing */ + HSI_STATUS_QUEUED, /* Message waiting to be served */ + HSI_STATUS_ERROR, /* Error when message transfer was ongoing */ +}; + +/* HSI port event codes */ +enum { + HSI_EVENT_START_RX, + HSI_EVENT_STOP_RX, +}; + +/** + * struct hsi_config - Configuration for RX/TX HSI modules + * @mode: Bit transmission mode (STREAM or FRAME) + * @channels: Number of channels to use [1..16] + * @speed: Max bit transmission speed (Kbit/s) + * @flow: RX flow type (SYNCHRONIZED or PIPELINE) + * @arb_mode: Arbitration mode for TX frame (Round robin, priority) + */ +struct hsi_config { + unsigned int mode; + unsigned int channels; + unsigned int speed; + union { + unsigned int flow; /* RX only */ + unsigned int arb_mode; /* TX only */ + }; +}; + +/** + * struct hsi_board_info - HSI client board info + * @name: Name for the HSI device + * @hsi_id: HSI controller id where the client sits + * @port: Port number in the controller where the client sits + * @tx_cfg: HSI TX configuration + * @rx_cfg: HSI RX configuration + * @platform_data: Platform related data + * @archdata: Architecture-dependent device data + */ +struct hsi_board_info { + const char *name; + unsigned int hsi_id; + unsigned int port; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + void *platform_data; + struct dev_archdata *archdata; +}; + +#ifdef CONFIG_HSI_BOARDINFO +extern int hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len); +#else +static inline int hsi_register_board_info(struct hsi_board_info const *info, + unsigned int len) +{ + return 0; +} +#endif /* CONFIG_HSI_BOARDINFO */ + +/** + * struct hsi_client - HSI client attached to an HSI port + * @device: Driver model representation of the device + * @tx_cfg: HSI TX configuration + * @rx_cfg: HSI RX configuration + * @hsi_start_rx: Called after incoming wake line goes high + * @hsi_stop_rx: Called after incoming wake line goes low + */ +struct hsi_client { + struct device device; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + void (*hsi_start_rx)(struct hsi_client *cl); + void (*hsi_stop_rx)(struct hsi_client *cl); + /* private: */ + unsigned int pclaimed:1; + struct list_head link; +}; + +#define to_hsi_client(dev) container_of(dev, struct hsi_client, device) + +static inline void hsi_client_set_drvdata(struct hsi_client *cl, void *data) +{ + dev_set_drvdata(&cl->device, data); +} + +static inline void *hsi_client_drvdata(struct hsi_client *cl) +{ + return dev_get_drvdata(&cl->device); +} + +/** + * struct hsi_client_driver - Driver associated to an HSI client + * @driver: Driver model representation of the driver + */ +struct hsi_client_driver { + struct device_driver driver; +}; + +#define to_hsi_client_driver(drv) container_of(drv, struct hsi_client_driver,\ + driver) + +int hsi_register_client_driver(struct hsi_client_driver *drv); + +static inline void hsi_unregister_client_driver(struct hsi_client_driver *drv) +{ + driver_unregister(&drv->driver); +} + +/** + * struct hsi_msg - HSI message descriptor + * @link: Free to use by the current descriptor owner + * @cl: HSI device client that issues the transfer + * @sgt: Head of the scatterlist array + * @context: Client context data associated to the transfer + * @complete: Transfer completion callback + * @destructor: Destructor to free resources when flushing + * @status: Status of the transfer when completed + * @actual_len: Actual length of data transfered on completion + * @channel: Channel were to TX/RX the message + * @ttype: Transfer type (TX if set, RX otherwise) + * @break_frame: if true HSI will send/receive a break frame. Data buffers are + * ignored in the request. + */ +struct hsi_msg { + struct list_head link; + struct hsi_client *cl; + struct sg_table sgt; + void *context; + + void (*complete)(struct hsi_msg *msg); + void (*destructor)(struct hsi_msg *msg); + + int status; + unsigned int actual_len; + unsigned int channel; + unsigned int ttype:1; + unsigned int break_frame:1; +}; + +struct hsi_msg *hsi_alloc_msg(unsigned int n_frag, gfp_t flags); +void hsi_free_msg(struct hsi_msg *msg); + +/** + * struct hsi_port - HSI port device + * @device: Driver model representation of the device + * @tx_cfg: Current TX path configuration + * @rx_cfg: Current RX path configuration + * @num: Port number + * @shared: Set when port can be shared by different clients + * @claimed: Reference count of clients which claimed the port + * @lock: Serialize port claim + * @async: Asynchronous transfer callback + * @setup: Callback to set the HSI client configuration + * @flush: Callback to clean the HW state and destroy all pending transfers + * @start_tx: Callback to inform that a client wants to TX data + * @stop_tx: Callback to inform that a client no longer wishes to TX data + * @release: Callback to inform that a client no longer uses the port + * @clients: List of hsi_clients using the port. + * @clock: Lock to serialize access to the clients list. + */ +struct hsi_port { + struct device device; + struct hsi_config tx_cfg; + struct hsi_config rx_cfg; + unsigned int num; + unsigned int shared:1; + int claimed; + struct mutex lock; + int (*async)(struct hsi_msg *msg); + int (*setup)(struct hsi_client *cl); + int (*flush)(struct hsi_client *cl); + int (*start_tx)(struct hsi_client *cl); + int (*stop_tx)(struct hsi_client *cl); + int (*release)(struct hsi_client *cl); + struct list_head clients; + spinlock_t clock; +}; + +#define to_hsi_port(dev) container_of(dev, struct hsi_port, device) +#define hsi_get_port(cl) to_hsi_port((cl)->device.parent) + +void hsi_event(struct hsi_port *port, unsigned int event); +int hsi_claim_port(struct hsi_client *cl, unsigned int share); +void hsi_release_port(struct hsi_client *cl); + +static inline int hsi_port_claimed(struct hsi_client *cl) +{ + return cl->pclaimed; +} + +static inline void hsi_port_set_drvdata(struct hsi_port *port, void *data) +{ + dev_set_drvdata(&port->device, data); +} + +static inline void *hsi_port_drvdata(struct hsi_port *port) +{ + return dev_get_drvdata(&port->device); +} + +/** + * struct hsi_controller - HSI controller device + * @device: Driver model representation of the device + * @owner: Pointer to the module owning the controller + * @id: HSI controller ID + * @num_ports: Number of ports in the HSI controller + * @port: Array of HSI ports + */ +struct hsi_controller { + struct device device; + struct module *owner; + unsigned int id; + unsigned int num_ports; + struct hsi_port *port; +}; + +#define to_hsi_controller(dev) container_of(dev, struct hsi_controller, device) + +struct hsi_controller *hsi_alloc_controller(unsigned int n_ports, gfp_t flags); +void hsi_free_controller(struct hsi_controller *hsi); +int hsi_register_controller(struct hsi_controller *hsi); +void hsi_unregister_controller(struct hsi_controller *hsi); + +static inline void hsi_controller_set_drvdata(struct hsi_controller *hsi, + void *data) +{ + dev_set_drvdata(&hsi->device, data); +} + +static inline void *hsi_controller_drvdata(struct hsi_controller *hsi) +{ + return dev_get_drvdata(&hsi->device); +} + +static inline struct hsi_port *hsi_find_port_num(struct hsi_controller *hsi, + unsigned int num) +{ + return (num < hsi->num_ports) ? &hsi->port[num] : NULL; +} + +/* + * API for HSI clients + */ +int hsi_async(struct hsi_client *cl, struct hsi_msg *msg); + +/** + * hsi_id - Get HSI controller ID associated to a client + * @cl: Pointer to a HSI client + * + * Return the controller id where the client is attached to + */ +static inline unsigned int hsi_id(struct hsi_client *cl) +{ + return to_hsi_controller(cl->device.parent->parent)->id; +} + +/** + * hsi_port_id - Gets the port number a client is attached to + * @cl: Pointer to HSI client + * + * Return the port number associated to the client + */ +static inline unsigned int hsi_port_id(struct hsi_client *cl) +{ + return to_hsi_port(cl->device.parent)->num; +} + +/** + * hsi_setup - Configure the client's port + * @cl: Pointer to the HSI client + * + * When sharing ports, clients should either relay on a single + * client setup or have the same setup for all of them. + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_setup(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->setup(cl); +} + +/** + * hsi_flush - Flush all pending transactions on the client's port + * @cl: Pointer to the HSI client + * + * This function will destroy all pending hsi_msg in the port and reset + * the HW port so it is ready to receive and transmit from a clean state. + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_flush(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->flush(cl); +} + +/** + * hsi_async_read - Submit a read transfer + * @cl: Pointer to the HSI client + * @msg: HSI message descriptor of the transfer + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_async_read(struct hsi_client *cl, struct hsi_msg *msg) +{ + msg->ttype = HSI_MSG_READ; + return hsi_async(cl, msg); +} + +/** + * hsi_async_write - Submit a write transfer + * @cl: Pointer to the HSI client + * @msg: HSI message descriptor of the transfer + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_async_write(struct hsi_client *cl, struct hsi_msg *msg) +{ + msg->ttype = HSI_MSG_WRITE; + return hsi_async(cl, msg); +} + +/** + * hsi_start_tx - Signal the port that the client wants to start a TX + * @cl: Pointer to the HSI client + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_start_tx(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->start_tx(cl); +} + +/** + * hsi_stop_tx - Signal the port that the client no longer wants to transmit + * @cl: Pointer to the HSI client + * + * Return -errno on failure, 0 on success + */ +static inline int hsi_stop_tx(struct hsi_client *cl) +{ + if (!hsi_port_claimed(cl)) + return -EACCES; + return hsi_get_port(cl)->stop_tx(cl); +} +#endif /* __LINUX_HSI_H__ */ -- cgit v0.10.2 From 4e69fc22753fcce1d9275b5517ef3646ffeffcf4 Mon Sep 17 00:00:00 2001 From: Andras Domokos Date: Thu, 30 Sep 2010 17:18:53 +0300 Subject: HSI: hsi_char: Add HSI char device driver Add HSI char device driver to the kernel. Signed-off-by: Andras Domokos Signed-off-by: Carlos Chinea diff --git a/drivers/hsi/clients/hsi_char.c b/drivers/hsi/clients/hsi_char.c new file mode 100644 index 0000000..88a050d --- /dev/null +++ b/drivers/hsi/clients/hsi_char.c @@ -0,0 +1,802 @@ +/* + * HSI character device driver, implements the character device + * interface. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define HSC_DEVS 16 /* Num of channels */ +#define HSC_MSGS 4 + +#define HSC_RXBREAK 0 + +#define HSC_ID_BITS 6 +#define HSC_PORT_ID_BITS 4 +#define HSC_ID_MASK 3 +#define HSC_PORT_ID_MASK 3 +#define HSC_CH_MASK 0xf + +/* + * We support up to 4 controllers that can have up to 4 + * ports, which should currently be more than enough. + */ +#define HSC_BASEMINOR(id, port_id) \ + ((((id) & HSC_ID_MASK) << HSC_ID_BITS) | \ + (((port_id) & HSC_PORT_ID_MASK) << HSC_PORT_ID_BITS)) + +enum { + HSC_CH_OPEN, + HSC_CH_READ, + HSC_CH_WRITE, + HSC_CH_WLINE, +}; + +enum { + HSC_RX, + HSC_TX, +}; + +struct hsc_client_data; +/** + * struct hsc_channel - hsi_char internal channel data + * @ch: channel number + * @flags: Keeps state of the channel (open/close, reading, writing) + * @free_msgs_list: List of free HSI messages/requests + * @rx_msgs_queue: List of pending RX requests + * @tx_msgs_queue: List of pending TX requests + * @lock: Serialize access to the lists + * @cl: reference to the associated hsi_client + * @cl_data: reference to the client data that this channels belongs to + * @rx_wait: RX requests wait queue + * @tx_wait: TX requests wait queue + */ +struct hsc_channel { + unsigned int ch; + unsigned long flags; + struct list_head free_msgs_list; + struct list_head rx_msgs_queue; + struct list_head tx_msgs_queue; + spinlock_t lock; + struct hsi_client *cl; + struct hsc_client_data *cl_data; + wait_queue_head_t rx_wait; + wait_queue_head_t tx_wait; +}; + +/** + * struct hsc_client_data - hsi_char internal client data + * @cdev: Characther device associated to the hsi_client + * @lock: Lock to serialize open/close access + * @flags: Keeps track of port state (rx hwbreak armed) + * @usecnt: Use count for claiming the HSI port (mutex protected) + * @cl: Referece to the HSI client + * @channels: Array of channels accessible by the client + */ +struct hsc_client_data { + struct cdev cdev; + struct mutex lock; + unsigned long flags; + unsigned int usecnt; + struct hsi_client *cl; + struct hsc_channel channels[HSC_DEVS]; +}; + +/* Stores the major number dynamically allocated for hsi_char */ +static unsigned int hsc_major; +/* Maximum buffer size that hsi_char will accept from userspace */ +static unsigned int max_data_size = 0x1000; +module_param(max_data_size, uint, S_IRUSR | S_IWUSR); +MODULE_PARM_DESC(max_data_size, "max read/write data size [4,8..65536] (^2)"); + +static void hsc_add_tail(struct hsc_channel *channel, struct hsi_msg *msg, + struct list_head *queue) +{ + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + list_add_tail(&msg->link, queue); + spin_unlock_irqrestore(&channel->lock, flags); +} + +static struct hsi_msg *hsc_get_first_msg(struct hsc_channel *channel, + struct list_head *queue) +{ + struct hsi_msg *msg = NULL; + unsigned long flags; + + spin_lock_irqsave(&channel->lock, flags); + + if (list_empty(queue)) + goto out; + + msg = list_first_entry(queue, struct hsi_msg, link); + list_del(&msg->link); +out: + spin_unlock_irqrestore(&channel->lock, flags); + + return msg; +} + +static inline void hsc_msg_free(struct hsi_msg *msg) +{ + kfree(sg_virt(msg->sgt.sgl)); + hsi_free_msg(msg); +} + +static void hsc_free_list(struct list_head *list) +{ + struct hsi_msg *msg, *tmp; + + list_for_each_entry_safe(msg, tmp, list, link) { + list_del(&msg->link); + hsc_msg_free(msg); + } +} + +static void hsc_reset_list(struct hsc_channel *channel, struct list_head *l) +{ + unsigned long flags; + LIST_HEAD(list); + + spin_lock_irqsave(&channel->lock, flags); + list_splice_init(l, &list); + spin_unlock_irqrestore(&channel->lock, flags); + + hsc_free_list(&list); +} + +static inline struct hsi_msg *hsc_msg_alloc(unsigned int alloc_size) +{ + struct hsi_msg *msg; + void *buf; + + msg = hsi_alloc_msg(1, GFP_KERNEL); + if (!msg) + goto out; + buf = kmalloc(alloc_size, GFP_KERNEL); + if (!buf) { + hsi_free_msg(msg); + goto out; + } + sg_init_one(msg->sgt.sgl, buf, alloc_size); + /* Ignore false positive, due to sg pointer handling */ + kmemleak_ignore(buf); + + return msg; +out: + return NULL; +} + +static inline int hsc_msgs_alloc(struct hsc_channel *channel) +{ + struct hsi_msg *msg; + int i; + + for (i = 0; i < HSC_MSGS; i++) { + msg = hsc_msg_alloc(max_data_size); + if (!msg) + goto out; + msg->channel = channel->ch; + list_add_tail(&msg->link, &channel->free_msgs_list); + } + + return 0; +out: + hsc_free_list(&channel->free_msgs_list); + + return -ENOMEM; +} + +static inline unsigned int hsc_msg_len_get(struct hsi_msg *msg) +{ + return msg->sgt.sgl->length; +} + +static inline void hsc_msg_len_set(struct hsi_msg *msg, unsigned int len) +{ + msg->sgt.sgl->length = len; +} + +static void hsc_rx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_READ, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_rx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_rx_completed(msg); +} + +static void hsc_tx_completed(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels + msg->channel; + + if (test_bit(HSC_CH_WRITE, &channel->flags)) { + hsc_add_tail(channel, msg, &channel->tx_msgs_queue); + wake_up(&channel->tx_wait); + } else { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +} + +static void hsc_tx_msg_destructor(struct hsi_msg *msg) +{ + msg->status = HSI_STATUS_ERROR; + hsc_msg_len_set(msg, 0); + hsc_tx_completed(msg); +} + +static void hsc_break_req_destructor(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + + hsi_free_msg(msg); + clear_bit(HSC_RXBREAK, &cl_data->flags); +} + +static void hsc_break_received(struct hsi_msg *msg) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(msg->cl); + struct hsc_channel *channel = cl_data->channels; + int i, ret; + + /* Broadcast HWBREAK on all channels */ + for (i = 0; i < HSC_DEVS; i++, channel++) { + struct hsi_msg *msg2; + + if (!test_bit(HSC_CH_READ, &channel->flags)) + continue; + msg2 = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg2) + continue; + clear_bit(HSC_CH_READ, &channel->flags); + hsc_msg_len_set(msg2, 0); + msg2->status = HSI_STATUS_COMPLETED; + hsc_add_tail(channel, msg2, &channel->rx_msgs_queue); + wake_up(&channel->rx_wait); + } + hsi_flush(msg->cl); + ret = hsi_async_read(msg->cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); +} + +static int hsc_break_request(struct hsi_client *cl) +{ + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + struct hsi_msg *msg; + int ret; + + if (test_and_set_bit(HSC_RXBREAK, &cl_data->flags)) + return -EBUSY; + + msg = hsi_alloc_msg(0, GFP_KERNEL); + if (!msg) { + clear_bit(HSC_RXBREAK, &cl_data->flags); + return -ENOMEM; + } + msg->break_frame = 1; + msg->complete = hsc_break_received; + msg->destructor = hsc_break_req_destructor; + ret = hsi_async_read(cl, msg); + if (ret < 0) + hsc_break_req_destructor(msg); + + return ret; +} + +static int hsc_break_send(struct hsi_client *cl) +{ + struct hsi_msg *msg; + int ret; + + msg = hsi_alloc_msg(0, GFP_ATOMIC); + if (!msg) + return -ENOMEM; + msg->break_frame = 1; + msg->complete = hsi_free_msg; + msg->destructor = hsi_free_msg; + ret = hsi_async_write(cl, msg); + if (ret < 0) + hsi_free_msg(msg); + + return ret; +} + +static int hsc_rx_set(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + struct hsi_config tmp; + int ret; + + if ((rxc->mode != HSI_MODE_STREAM) && (rxc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((rxc->channels == 0) || (rxc->channels > HSC_DEVS)) + return -EINVAL; + if (rxc->channels & (rxc->channels - 1)) + return -EINVAL; + if ((rxc->flow != HSI_FLOW_SYNC) && (rxc->flow != HSI_FLOW_PIPE)) + return -EINVAL; + tmp = cl->rx_cfg; + cl->rx_cfg.mode = rxc->mode; + cl->rx_cfg.channels = rxc->channels; + cl->rx_cfg.flow = rxc->flow; + ret = hsi_setup(cl); + if (ret < 0) { + cl->rx_cfg = tmp; + return ret; + } + if (rxc->mode == HSI_MODE_FRAME) + hsc_break_request(cl); + + return ret; +} + +static inline void hsc_rx_get(struct hsi_client *cl, struct hsc_rx_config *rxc) +{ + rxc->mode = cl->rx_cfg.mode; + rxc->channels = cl->rx_cfg.channels; + rxc->flow = cl->rx_cfg.flow; +} + +static int hsc_tx_set(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + struct hsi_config tmp; + int ret; + + if ((txc->mode != HSI_MODE_STREAM) && (txc->mode != HSI_MODE_FRAME)) + return -EINVAL; + if ((txc->channels == 0) || (txc->channels > HSC_DEVS)) + return -EINVAL; + if (txc->channels & (txc->channels - 1)) + return -EINVAL; + if ((txc->arb_mode != HSI_ARB_RR) && (txc->arb_mode != HSI_ARB_PRIO)) + return -EINVAL; + tmp = cl->tx_cfg; + cl->tx_cfg.mode = txc->mode; + cl->tx_cfg.channels = txc->channels; + cl->tx_cfg.speed = txc->speed; + cl->tx_cfg.arb_mode = txc->arb_mode; + ret = hsi_setup(cl); + if (ret < 0) { + cl->tx_cfg = tmp; + return ret; + } + + return ret; +} + +static inline void hsc_tx_get(struct hsi_client *cl, struct hsc_tx_config *txc) +{ + txc->mode = cl->tx_cfg.mode; + txc->channels = cl->tx_cfg.channels; + txc->speed = cl->tx_cfg.speed; + txc->arb_mode = cl->tx_cfg.arb_mode; +} + +static ssize_t hsc_read(struct file *file, char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if (len == 0) + return 0; + if (!IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->rx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_READ, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + ret = -ENOSPC; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_rx_completed; + msg->destructor = hsc_rx_msg_destructor; + ret = hsi_async_read(channel->cl, msg); + if (ret < 0) { + hsc_add_tail(channel, msg, &channel->free_msgs_list); + goto out; + } + + ret = wait_event_interruptible(channel->rx_wait, + !list_empty(&channel->rx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_READ, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->rx_msgs_queue); + if (msg) { + if (msg->status != HSI_STATUS_ERROR) { + ret = copy_to_user((void __user *)buf, + sg_virt(msg->sgt.sgl), hsc_msg_len_get(msg)); + if (ret) + ret = -EFAULT; + else + ret = hsc_msg_len_get(msg); + } else { + ret = -EIO; + } + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_READ, &channel->flags); + + return ret; +} + +static ssize_t hsc_write(struct file *file, const char __user *buf, size_t len, + loff_t *ppos __maybe_unused) +{ + struct hsc_channel *channel = file->private_data; + struct hsi_msg *msg; + ssize_t ret; + + if ((len == 0) || !IS_ALIGNED(len, sizeof(u32))) + return -EINVAL; + if (len > max_data_size) + len = max_data_size; + if (channel->ch >= channel->cl->tx_cfg.channels) + return -ECHRNG; + if (test_and_set_bit(HSC_CH_WRITE, &channel->flags)) + return -EBUSY; + msg = hsc_get_first_msg(channel, &channel->free_msgs_list); + if (!msg) { + clear_bit(HSC_CH_WRITE, &channel->flags); + return -ENOSPC; + } + if (copy_from_user(sg_virt(msg->sgt.sgl), (void __user *)buf, len)) { + ret = -EFAULT; + goto out; + } + hsc_msg_len_set(msg, len); + msg->complete = hsc_tx_completed; + msg->destructor = hsc_tx_msg_destructor; + ret = hsi_async_write(channel->cl, msg); + if (ret < 0) + goto out; + + ret = wait_event_interruptible(channel->tx_wait, + !list_empty(&channel->tx_msgs_queue)); + if (ret < 0) { + clear_bit(HSC_CH_WRITE, &channel->flags); + hsi_flush(channel->cl); + return -EINTR; + } + + msg = hsc_get_first_msg(channel, &channel->tx_msgs_queue); + if (msg) { + if (msg->status == HSI_STATUS_ERROR) + ret = -EIO; + else + ret = hsc_msg_len_get(msg); + + hsc_add_tail(channel, msg, &channel->free_msgs_list); + } +out: + clear_bit(HSC_CH_WRITE, &channel->flags); + + return ret; +} + +static long hsc_ioctl(struct file *file, unsigned int cmd, unsigned long arg) +{ + struct hsc_channel *channel = file->private_data; + unsigned int state; + struct hsc_rx_config rxc; + struct hsc_tx_config txc; + long ret = 0; + + switch (cmd) { + case HSC_RESET: + hsi_flush(channel->cl); + break; + case HSC_SET_PM: + if (copy_from_user(&state, (void __user *)arg, sizeof(state))) + return -EFAULT; + if (state == HSC_PM_DISABLE) { + if (test_and_set_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_start_tx(channel->cl); + } else if (state == HSC_PM_ENABLE) { + if (!test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + return -EINVAL; + ret = hsi_stop_tx(channel->cl); + } else { + ret = -EINVAL; + } + break; + case HSC_SEND_BREAK: + return hsc_break_send(channel->cl); + case HSC_SET_RX: + if (copy_from_user(&rxc, (void __user *)arg, sizeof(rxc))) + return -EFAULT; + return hsc_rx_set(channel->cl, &rxc); + case HSC_GET_RX: + hsc_rx_get(channel->cl, &rxc); + if (copy_to_user((void __user *)arg, &rxc, sizeof(rxc))) + return -EFAULT; + break; + case HSC_SET_TX: + if (copy_from_user(&txc, (void __user *)arg, sizeof(txc))) + return -EFAULT; + return hsc_tx_set(channel->cl, &txc); + case HSC_GET_TX: + hsc_tx_get(channel->cl, &txc); + if (copy_to_user((void __user *)arg, &txc, sizeof(txc))) + return -EFAULT; + break; + default: + return -ENOIOCTLCMD; + } + + return ret; +} + +static inline void __hsc_port_release(struct hsc_client_data *cl_data) +{ + BUG_ON(cl_data->usecnt == 0); + + if (--cl_data->usecnt == 0) { + hsi_flush(cl_data->cl); + hsi_release_port(cl_data->cl); + } +} + +static int hsc_open(struct inode *inode, struct file *file) +{ + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + int ret = 0; + + pr_debug("open, minor = %d\n", iminor(inode)); + + cl_data = container_of(inode->i_cdev, struct hsc_client_data, cdev); + mutex_lock(&cl_data->lock); + channel = cl_data->channels + (iminor(inode) & HSC_CH_MASK); + + if (test_and_set_bit(HSC_CH_OPEN, &channel->flags)) { + ret = -EBUSY; + goto out; + } + /* + * Check if we have already claimed the port associated to the HSI + * client. If not then try to claim it, else increase its refcount + */ + if (cl_data->usecnt == 0) { + ret = hsi_claim_port(cl_data->cl, 0); + if (ret < 0) + goto out; + hsi_setup(cl_data->cl); + } + cl_data->usecnt++; + + ret = hsc_msgs_alloc(channel); + if (ret < 0) { + __hsc_port_release(cl_data); + goto out; + } + + file->private_data = channel; + mutex_unlock(&cl_data->lock); + + return ret; +out: + mutex_unlock(&cl_data->lock); + + return ret; +} + +static int hsc_release(struct inode *inode __maybe_unused, struct file *file) +{ + struct hsc_channel *channel = file->private_data; + struct hsc_client_data *cl_data = channel->cl_data; + + mutex_lock(&cl_data->lock); + file->private_data = NULL; + if (test_and_clear_bit(HSC_CH_WLINE, &channel->flags)) + hsi_stop_tx(channel->cl); + __hsc_port_release(cl_data); + hsc_reset_list(channel, &channel->rx_msgs_queue); + hsc_reset_list(channel, &channel->tx_msgs_queue); + hsc_reset_list(channel, &channel->free_msgs_list); + clear_bit(HSC_CH_READ, &channel->flags); + clear_bit(HSC_CH_WRITE, &channel->flags); + clear_bit(HSC_CH_OPEN, &channel->flags); + wake_up(&channel->rx_wait); + wake_up(&channel->tx_wait); + mutex_unlock(&cl_data->lock); + + return 0; +} + +static const struct file_operations hsc_fops = { + .owner = THIS_MODULE, + .read = hsc_read, + .write = hsc_write, + .unlocked_ioctl = hsc_ioctl, + .open = hsc_open, + .release = hsc_release, +}; + +static void __devinit hsc_channel_init(struct hsc_channel *channel) +{ + init_waitqueue_head(&channel->rx_wait); + init_waitqueue_head(&channel->tx_wait); + spin_lock_init(&channel->lock); + INIT_LIST_HEAD(&channel->free_msgs_list); + INIT_LIST_HEAD(&channel->rx_msgs_queue); + INIT_LIST_HEAD(&channel->tx_msgs_queue); +} + +static int __devinit hsc_probe(struct device *dev) +{ + const char devname[] = "hsi_char"; + struct hsc_client_data *cl_data; + struct hsc_channel *channel; + struct hsi_client *cl = to_hsi_client(dev); + unsigned int hsc_baseminor; + dev_t hsc_dev; + int ret; + int i; + + cl_data = kzalloc(sizeof(*cl_data), GFP_KERNEL); + if (!cl_data) { + dev_err(dev, "Could not allocate hsc_client_data\n"); + return -ENOMEM; + } + hsc_baseminor = HSC_BASEMINOR(hsi_id(cl), hsi_port_id(cl)); + if (!hsc_major) { + ret = alloc_chrdev_region(&hsc_dev, hsc_baseminor, + HSC_DEVS, devname); + if (ret > 0) + hsc_major = MAJOR(hsc_dev); + } else { + hsc_dev = MKDEV(hsc_major, hsc_baseminor); + ret = register_chrdev_region(hsc_dev, HSC_DEVS, devname); + } + if (ret < 0) { + dev_err(dev, "Device %s allocation failed %d\n", + hsc_major ? "minor" : "major", ret); + goto out1; + } + mutex_init(&cl_data->lock); + hsi_client_set_drvdata(cl, cl_data); + cdev_init(&cl_data->cdev, &hsc_fops); + cl_data->cdev.owner = THIS_MODULE; + cl_data->cl = cl; + for (i = 0, channel = cl_data->channels; i < HSC_DEVS; i++, channel++) { + hsc_channel_init(channel); + channel->ch = i; + channel->cl = cl; + channel->cl_data = cl_data; + } + + /* 1 hsi client -> N char devices (one for each channel) */ + ret = cdev_add(&cl_data->cdev, hsc_dev, HSC_DEVS); + if (ret) { + dev_err(dev, "Could not add char device %d\n", ret); + goto out2; + } + + return 0; +out2: + unregister_chrdev_region(hsc_dev, HSC_DEVS); +out1: + kfree(cl_data); + + return ret; +} + +static int __devexit hsc_remove(struct device *dev) +{ + struct hsi_client *cl = to_hsi_client(dev); + struct hsc_client_data *cl_data = hsi_client_drvdata(cl); + dev_t hsc_dev = cl_data->cdev.dev; + + cdev_del(&cl_data->cdev); + unregister_chrdev_region(hsc_dev, HSC_DEVS); + hsi_client_set_drvdata(cl, NULL); + kfree(cl_data); + + return 0; +} + +static struct hsi_client_driver hsc_driver = { + .driver = { + .name = "hsi_char", + .owner = THIS_MODULE, + .probe = hsc_probe, + .remove = __devexit_p(hsc_remove), + }, +}; + +static int __init hsc_init(void) +{ + int ret; + + if ((max_data_size < 4) || (max_data_size > 0x10000) || + (max_data_size & (max_data_size - 1))) { + pr_err("Invalid max read/write data size"); + return -EINVAL; + } + + ret = hsi_register_client_driver(&hsc_driver); + if (ret) { + pr_err("Error while registering HSI/SSI driver %d", ret); + return ret; + } + + pr_info("HSI/SSI char device loaded\n"); + + return 0; +} +module_init(hsc_init); + +static void __exit hsc_exit(void) +{ + hsi_unregister_client_driver(&hsc_driver); + pr_info("HSI char device removed\n"); +} +module_exit(hsc_exit); + +MODULE_AUTHOR("Andras Domokos "); +MODULE_ALIAS("hsi:hsi_char"); +MODULE_DESCRIPTION("HSI character device"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/hsi/hsi_char.h b/include/linux/hsi/hsi_char.h new file mode 100644 index 0000000..76160b4 --- /dev/null +++ b/include/linux/hsi/hsi_char.h @@ -0,0 +1,63 @@ +/* + * Part of the HSI character device driver. + * + * Copyright (C) 2010 Nokia Corporation. All rights reserved. + * + * Contact: Andras Domokos + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + +#ifndef __HSI_CHAR_H +#define __HSI_CHAR_H + +#define HSI_CHAR_MAGIC 'k' +#define HSC_IOW(num, dtype) _IOW(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOR(num, dtype) _IOR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IOWR(num, dtype) _IOWR(HSI_CHAR_MAGIC, num, dtype) +#define HSC_IO(num) _IO(HSI_CHAR_MAGIC, num) + +#define HSC_RESET HSC_IO(16) +#define HSC_SET_PM HSC_IO(17) +#define HSC_SEND_BREAK HSC_IO(18) +#define HSC_SET_RX HSC_IOW(19, struct hsc_rx_config) +#define HSC_GET_RX HSC_IOW(20, struct hsc_rx_config) +#define HSC_SET_TX HSC_IOW(21, struct hsc_tx_config) +#define HSC_GET_TX HSC_IOW(22, struct hsc_tx_config) + +#define HSC_PM_DISABLE 0 +#define HSC_PM_ENABLE 1 + +#define HSC_MODE_STREAM 1 +#define HSC_MODE_FRAME 2 +#define HSC_FLOW_SYNC 0 +#define HSC_ARB_RR 0 +#define HSC_ARB_PRIO 1 + +struct hsc_rx_config { + uint32_t mode; + uint32_t flow; + uint32_t channels; +}; + +struct hsc_tx_config { + uint32_t mode; + uint32_t channels; + uint32_t speed; + uint32_t arb_mode; +}; + +#endif /* __HSI_CHAR_H */ -- cgit v0.10.2 From f9e402016de91c2444e46ecfd706880969b1ae9e Mon Sep 17 00:00:00 2001 From: Andras Domokos Date: Wed, 21 Apr 2010 12:04:21 +0300 Subject: HSI: hsi_char: Add HSI char device kernel configuration Add HSI character device kernel configuration Signed-off-by: Andras Domokos Signed-off-by: Carlos Chinea diff --git a/drivers/hsi/Kconfig b/drivers/hsi/Kconfig index 937062e..d94e38d 100644 --- a/drivers/hsi/Kconfig +++ b/drivers/hsi/Kconfig @@ -14,4 +14,6 @@ config HSI_BOARDINFO bool default y +source "drivers/hsi/clients/Kconfig" + endif # HSI diff --git a/drivers/hsi/Makefile b/drivers/hsi/Makefile index ed94a3a..9d5d33f 100644 --- a/drivers/hsi/Makefile +++ b/drivers/hsi/Makefile @@ -3,3 +3,4 @@ # obj-$(CONFIG_HSI_BOARDINFO) += hsi_boardinfo.o obj-$(CONFIG_HSI) += hsi.o +obj-y += clients/ diff --git a/drivers/hsi/clients/Kconfig b/drivers/hsi/clients/Kconfig new file mode 100644 index 0000000..3bacd27 --- /dev/null +++ b/drivers/hsi/clients/Kconfig @@ -0,0 +1,13 @@ +# +# HSI clients configuration +# + +comment "HSI clients" + +config HSI_CHAR + tristate "HSI/SSI character driver" + depends on HSI + ---help--- + If you say Y here, you will enable the HSI/SSI character driver. + This driver provides a simple character device interface for + serial communication with the cellular modem over HSI/SSI bus. diff --git a/drivers/hsi/clients/Makefile b/drivers/hsi/clients/Makefile new file mode 100644 index 0000000..327c0e2 --- /dev/null +++ b/drivers/hsi/clients/Makefile @@ -0,0 +1,5 @@ +# +# Makefile for HSI clients +# + +obj-$(CONFIG_HSI_CHAR) += hsi_char.o diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 619b565..3171939 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -3,6 +3,7 @@ header-y += can/ header-y += caif/ header-y += dvb/ header-y += hdlc/ +header-y += hsi/ header-y += isdn/ header-y += mmc/ header-y += nfsd/ diff --git a/include/linux/hsi/Kbuild b/include/linux/hsi/Kbuild new file mode 100644 index 0000000..271a770 --- /dev/null +++ b/include/linux/hsi/Kbuild @@ -0,0 +1 @@ +header-y += hsi_char.h -- cgit v0.10.2 From a4ac73a701288f633fbf2369ffaae4841aa295b3 Mon Sep 17 00:00:00 2001 From: Carlos Chinea Date: Thu, 29 Apr 2010 13:19:06 +0300 Subject: HSI: Add HSI API documentation Add an entry for HSI in the device-drivers section of the kernel documentation. Signed-off-by: Carlos Chinea diff --git a/Documentation/DocBook/device-drivers.tmpl b/Documentation/DocBook/device-drivers.tmpl index b638e50..5f70f73 100644 --- a/Documentation/DocBook/device-drivers.tmpl +++ b/Documentation/DocBook/device-drivers.tmpl @@ -437,4 +437,21 @@ X!Idrivers/video/console/fonts.c !Edrivers/i2c/i2c-core.c + + High Speed Synchronous Serial Interface (HSI) + + + High Speed Synchronous Serial Interface (HSI) is a + serial interface mainly used for connecting application + engines (APE) with cellular modem engines (CMT) in cellular + handsets. + + HSI provides multiplexing for up to 16 logical channels, + low-latency and full duplex communication. + + +!Iinclude/linux/hsi/hsi.h +!Edrivers/hsi/hsi.c + + -- cgit v0.10.2 From 43139a61fc68f4b0af7327a0e63f340a7c81c69a Mon Sep 17 00:00:00 2001 From: Andras Domokos Date: Thu, 6 May 2010 15:10:47 +0300 Subject: HSI: hsi_char: Update ioctl-number.txt Added ioctl range for HSI char devices to the documentation Signed-off-by: Andras Domokos Signed-off-by: Carlos Chinea diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt index 54078ed..af76fde 100644 --- a/Documentation/ioctl/ioctl-number.txt +++ b/Documentation/ioctl/ioctl-number.txt @@ -223,6 +223,7 @@ Code Seq#(hex) Include File Comments 'j' 00-3F linux/joystick.h 'k' 00-0F linux/spi/spidev.h conflict! 'k' 00-05 video/kyro.h conflict! +'k' 10-17 linux/hsi/hsi_char.h HSI character device 'l' 00-3F linux/tcfs_fs.h transparent cryptographic file system 'l' 40-7F linux/udf_fs_i.h in development: -- cgit v0.10.2 From 6bebb572404f96d367170fb263603cda7251f932 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 4 Jan 2012 10:50:09 +0100 Subject: ARM: 7268/1: integrator: defconfig for both AP and CP This updates the Integrator defconfig to include the hardware found on the Integrator/CP: SMC91X, CLCD, MMCI/PL180. Further the sometimes disrupting VGA_CONSOLE is disabled (those who have a VGA card can enable it) and typical default VFAT layouts of the MMC cards are supported by enabling VFAT and CP437 encoding of the file system. After this my default kernels boot successfully on Integrator AP and CP alike. Signed-off-by: Linus Walleij Signed-off-by: Russell King diff --git a/arch/arm/configs/integrator_defconfig b/arch/arm/configs/integrator_defconfig index 1103f62..a8314c3 100644 --- a/arch/arm/configs/integrator_defconfig +++ b/arch/arm/configs/integrator_defconfig @@ -57,18 +57,24 @@ CONFIG_NETDEVICES=y CONFIG_NET_ETHERNET=y CONFIG_NET_PCI=y CONFIG_E100=y +CONFIG_SMC91X=y # CONFIG_KEYBOARD_ATKBD is not set # CONFIG_SERIO_SERPORT is not set CONFIG_SERIAL_AMBA_PL010=y CONFIG_SERIAL_AMBA_PL010_CONSOLE=y CONFIG_FB=y CONFIG_FB_MODE_HELPERS=y +CONFIG_FB_ARMCLCD=y CONFIG_FB_MATROX=y CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y +# CONFIG_VGA_CONSOLE is not set +CONFIG_MMC=y +CONFIG_MMC_ARMMMCI=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_PL030=y CONFIG_EXT2_FS=y +CONFIG_VFAT_FS=y CONFIG_TMPFS=y CONFIG_JFFS2_FS=y CONFIG_CRAMFS=y @@ -78,5 +84,7 @@ CONFIG_ROOT_NFS=y CONFIG_NFSD=y CONFIG_NFSD_V3=y CONFIG_PARTITION_ADVANCED=y +CONFIG_NLS_CODEPAGE_437=y +CONFIG_NLS_ISO8859_1=y CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_KERNEL=y -- cgit v0.10.2 From 3e175ca4cab37b1eb99f7cf032142a1e5cdb3d97 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 Sep 2011 11:27:30 +0100 Subject: ARM: cache-l2x0.c: consistently use u32 __u32 exists to avoid namespace clashes with userspace programs. It should not be used outside header files, so convert to use u32 instead. Also, don't mix uint32_t and __u32 - use the same type throughout the file for consistency. Acked-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/include/asm/hardware/cache-l2x0.h b/arch/arm/include/asm/hardware/cache-l2x0.h index 7df239b..c4c87bc 100644 --- a/arch/arm/include/asm/hardware/cache-l2x0.h +++ b/arch/arm/include/asm/hardware/cache-l2x0.h @@ -103,11 +103,11 @@ #define L2X0_ADDR_FILTER_EN 1 #ifndef __ASSEMBLY__ -extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask); +extern void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask); #if defined(CONFIG_CACHE_L2X0) && defined(CONFIG_OF) -extern int l2x0_of_init(__u32 aux_val, __u32 aux_mask); +extern int l2x0_of_init(u32 aux_val, u32 aux_mask); #else -static inline int l2x0_of_init(__u32 aux_val, __u32 aux_mask) +static inline int l2x0_of_init(u32 aux_val, u32 aux_mask) { return -ENODEV; } diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index b1e192b..a53fd2a 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -30,13 +30,13 @@ static void __iomem *l2x0_base; static DEFINE_RAW_SPINLOCK(l2x0_lock); -static uint32_t l2x0_way_mask; /* Bitmask of active ways */ -static uint32_t l2x0_size; +static u32 l2x0_way_mask; /* Bitmask of active ways */ +static u32 l2x0_size; struct l2x0_regs l2x0_saved_regs; struct l2x0_of_data { - void (*setup)(const struct device_node *, __u32 *, __u32 *); + void (*setup)(const struct device_node *, u32 *, u32 *); void (*save)(void); void (*resume)(void); }; @@ -288,7 +288,7 @@ static void l2x0_disable(void) raw_spin_unlock_irqrestore(&l2x0_lock, flags); } -static void l2x0_unlock(__u32 cache_id) +static void l2x0_unlock(u32 cache_id) { int lockregs; int i; @@ -307,11 +307,11 @@ static void l2x0_unlock(__u32 cache_id) } } -void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) +void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) { - __u32 aux; - __u32 cache_id; - __u32 way_size = 0; + u32 aux; + u32 cache_id; + u32 way_size = 0; int ways; const char *type; @@ -388,7 +388,7 @@ void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask) #ifdef CONFIG_OF static void __init l2x0_of_setup(const struct device_node *np, - __u32 *aux_val, __u32 *aux_mask) + u32 *aux_val, u32 *aux_mask) { u32 data[2] = { 0, 0 }; u32 tag = 0; @@ -422,7 +422,7 @@ static void __init l2x0_of_setup(const struct device_node *np, } static void __init pl310_of_setup(const struct device_node *np, - __u32 *aux_val, __u32 *aux_mask) + u32 *aux_val, u32 *aux_mask) { u32 data[3] = { 0, 0, 0 }; u32 tag[3] = { 0, 0, 0 }; @@ -548,7 +548,7 @@ static const struct of_device_id l2x0_ids[] __initconst = { {} }; -int __init l2x0_of_init(__u32 aux_val, __u32 aux_mask) +int __init l2x0_of_init(u32 aux_val, u32 aux_mask) { struct device_node *np; struct l2x0_of_data *data; -- cgit v0.10.2 From 45cd5290bfd358e9885c0bf47a8c46671a92f716 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 12 Jan 2012 23:08:07 +0000 Subject: ARM: add dma coherent region reporting via procfs Add a new seqfile for reporting coherent DMA allocations. This contains the address range, size and the function which was used to allocate each region, allowing these allocations to be viewed in much the same way as /proc/vmallocinfo. The DMA coherent region has limited space, so this allows allocation failures to be viewed, as well as finding out how much space is being used. Make sure this file is only readable by root - same as vmallocinfo - to prevent information leakage. Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 1aa664a..db23ae4 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -214,7 +214,8 @@ static int __init consistent_init(void) core_initcall(consistent_init); static void * -__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) +__dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot, + const void *caller) { struct arm_vmregion *c; size_t align; @@ -241,7 +242,7 @@ __dma_alloc_remap(struct page *page, size_t size, gfp_t gfp, pgprot_t prot) * Allocate a virtual address in the consistent mapping region. */ c = arm_vmregion_alloc(&consistent_head, align, size, - gfp & ~(__GFP_DMA | __GFP_HIGHMEM)); + gfp & ~(__GFP_DMA | __GFP_HIGHMEM), caller); if (c) { pte_t *pte; int idx = CONSISTENT_PTE_INDEX(c->vm_start); @@ -320,14 +321,14 @@ static void __dma_free_remap(void *cpu_addr, size_t size) #else /* !CONFIG_MMU */ -#define __dma_alloc_remap(page, size, gfp, prot) page_address(page) +#define __dma_alloc_remap(page, size, gfp, prot, c) page_address(page) #define __dma_free_remap(addr, size) do { } while (0) #endif /* CONFIG_MMU */ static void * __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, - pgprot_t prot) + pgprot_t prot, const void *caller) { struct page *page; void *addr; @@ -349,7 +350,7 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, return NULL; if (!arch_is_coherent()) - addr = __dma_alloc_remap(page, size, gfp, prot); + addr = __dma_alloc_remap(page, size, gfp, prot, caller); else addr = page_address(page); @@ -374,7 +375,8 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gf return memory; return __dma_alloc(dev, size, handle, gfp, - pgprot_dmacoherent(pgprot_kernel)); + pgprot_dmacoherent(pgprot_kernel), + __builtin_return_address(0)); } EXPORT_SYMBOL(dma_alloc_coherent); @@ -386,7 +388,8 @@ void * dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp) { return __dma_alloc(dev, size, handle, gfp, - pgprot_writecombine(pgprot_kernel)); + pgprot_writecombine(pgprot_kernel), + __builtin_return_address(0)); } EXPORT_SYMBOL(dma_alloc_writecombine); @@ -723,6 +726,9 @@ EXPORT_SYMBOL(dma_set_mask); static int __init dma_debug_do_init(void) { +#ifdef CONFIG_MMU + arm_vmregion_create_proc("dma-mappings", &consistent_head); +#endif dma_debug_init(PREALLOC_DMA_DEBUG_ENTRIES); return 0; } diff --git a/arch/arm/mm/vmregion.c b/arch/arm/mm/vmregion.c index 036fdbf..a631016 100644 --- a/arch/arm/mm/vmregion.c +++ b/arch/arm/mm/vmregion.c @@ -1,5 +1,8 @@ +#include #include #include +#include +#include #include #include "vmregion.h" @@ -36,7 +39,7 @@ struct arm_vmregion * arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, - size_t size, gfp_t gfp) + size_t size, gfp_t gfp, const void *caller) { unsigned long start = head->vm_start, addr = head->vm_end; unsigned long flags; @@ -52,6 +55,8 @@ arm_vmregion_alloc(struct arm_vmregion_head *head, size_t align, if (!new) goto out; + new->caller = caller; + spin_lock_irqsave(&head->vm_lock, flags); addr = rounddown(addr - size, align); @@ -129,3 +134,72 @@ void arm_vmregion_free(struct arm_vmregion_head *head, struct arm_vmregion *c) kfree(c); } + +#ifdef CONFIG_PROC_FS +static int arm_vmregion_show(struct seq_file *m, void *p) +{ + struct arm_vmregion *c = list_entry(p, struct arm_vmregion, vm_list); + + seq_printf(m, "0x%08lx-0x%08lx %7lu", c->vm_start, c->vm_end, + c->vm_end - c->vm_start); + if (c->caller) + seq_printf(m, " %pS", (void *)c->caller); + seq_putc(m, '\n'); + return 0; +} + +static void *arm_vmregion_start(struct seq_file *m, loff_t *pos) +{ + struct arm_vmregion_head *h = m->private; + spin_lock_irq(&h->vm_lock); + return seq_list_start(&h->vm_list, *pos); +} + +static void *arm_vmregion_next(struct seq_file *m, void *p, loff_t *pos) +{ + struct arm_vmregion_head *h = m->private; + return seq_list_next(p, &h->vm_list, pos); +} + +static void arm_vmregion_stop(struct seq_file *m, void *p) +{ + struct arm_vmregion_head *h = m->private; + spin_unlock_irq(&h->vm_lock); +} + +static const struct seq_operations arm_vmregion_ops = { + .start = arm_vmregion_start, + .stop = arm_vmregion_stop, + .next = arm_vmregion_next, + .show = arm_vmregion_show, +}; + +static int arm_vmregion_open(struct inode *inode, struct file *file) +{ + struct arm_vmregion_head *h = PDE(inode)->data; + int ret = seq_open(file, &arm_vmregion_ops); + if (!ret) { + struct seq_file *m = file->private_data; + m->private = h; + } + return ret; +} + +static const struct file_operations arm_vmregion_fops = { + .open = arm_vmregion_open, + .read = seq_read, + .llseek = seq_lseek, + .release = seq_release, +}; + +int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h) +{ + proc_create_data(path, S_IRUSR, NULL, &arm_vmregion_fops, h); + return 0; +} +#else +int arm_vmregion_create_proc(const char *path, struct arm_vmregion_head *h) +{ + return 0; +} +#endif diff --git a/arch/arm/mm/vmregion.h b/arch/arm/mm/vmregion.h index 15e9f04..162be66 100644 --- a/arch/arm/mm/vmregion.h +++ b/arch/arm/mm/vmregion.h @@ -19,11 +19,14 @@ struct arm_vmregion { unsigned long vm_end; struct page *vm_pages; int vm_active; + const void *caller; }; -struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t); +struct arm_vmregion *arm_vmregion_alloc(struct arm_vmregion_head *, size_t, size_t, gfp_t, const void *); struct arm_vmregion *arm_vmregion_find(struct arm_vmregion_head *, unsigned long); struct arm_vmregion *arm_vmregion_find_remove(struct arm_vmregion_head *, unsigned long); void arm_vmregion_free(struct arm_vmregion_head *, struct arm_vmregion *); +int arm_vmregion_create_proc(const char *, struct arm_vmregion_head *); + #endif -- cgit v0.10.2 From 94e5a85b3be0ce109d26aa6812b2a02c518a0e4b Mon Sep 17 00:00:00 2001 From: Russell King Date: Wed, 18 Jan 2012 15:32:49 +0000 Subject: ARM: earlier initialization of vectors page Initialize the contents of the vectors page immediately after we allocate the page, but before we map it. This avoids any possible aliases with other mappings which may need to be flushed after the page has been mapped irrespective of the cache type. We follow this later with a flush_cache_all() after all static memory mappings have been initialized, which ensures that this is safe from any cache effects. Tested-by: Catalin Marinas Reviewed-by: Catalin Marinas Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/include/asm/traps.h b/arch/arm/include/asm/traps.h index 5b29a66..f555bb3 100644 --- a/arch/arm/include/asm/traps.h +++ b/arch/arm/include/asm/traps.h @@ -46,7 +46,7 @@ static inline int in_exception_text(unsigned long ptr) return in ? : __in_irqentry_text(ptr); } -extern void __init early_trap_init(void); +extern void __init early_trap_init(void *); extern void dump_backtrace_entry(unsigned long where, unsigned long from, unsigned long frame); extern void ptrace_break(struct task_struct *tsk, struct pt_regs *regs); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 129fbd5..9b65cb4 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -961,7 +961,6 @@ void __init setup_arch(char **cmdline_p) conswitchp = &dummy_con; #endif #endif - early_trap_init(); if (mdesc->init_early) mdesc->init_early(); diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 99a5727..be15daf 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -781,18 +781,16 @@ static void __init kuser_get_tls_init(unsigned long vectors) memcpy((void *)vectors + 0xfe0, (void *)vectors + 0xfe8, 4); } -void __init early_trap_init(void) +void __init early_trap_init(void *vectors_base) { -#if defined(CONFIG_CPU_USE_DOMAINS) - unsigned long vectors = CONFIG_VECTORS_BASE; -#else - unsigned long vectors = (unsigned long)vectors_page; -#endif + unsigned long vectors = (unsigned long)vectors_base; extern char __stubs_start[], __stubs_end[]; extern char __vectors_start[], __vectors_end[]; extern char __kuser_helper_start[], __kuser_helper_end[]; int kuser_sz = __kuser_helper_end - __kuser_helper_start; + vectors_page = vectors_base; + /* * Copy the vectors, stubs and kuser helpers (in entry-armv.S) * into the vector page, mapped at 0xffff0000, and ensure these diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 94c5a0c..c1263ad 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -997,11 +997,14 @@ static void __init devicemaps_init(struct machine_desc *mdesc) { struct map_desc map; unsigned long addr; + void *vectors; /* * Allocate the vector page early. */ - vectors_page = early_alloc(PAGE_SIZE); + vectors = early_alloc(PAGE_SIZE); + + early_trap_init(vectors); for (addr = VMALLOC_START; addr; addr += PMD_SIZE) pmd_clear(pmd_off_k(addr)); @@ -1041,7 +1044,7 @@ static void __init devicemaps_init(struct machine_desc *mdesc) * location (0xffff0000). If we aren't using high-vectors, also * create a mapping at the low-vectors virtual address. */ - map.pfn = __phys_to_pfn(virt_to_phys(vectors_page)); + map.pfn = __phys_to_pfn(virt_to_phys(vectors)); map.virtual = 0xffff0000; map.length = PAGE_SIZE; map.type = MT_HIGH_VECTORS; -- cgit v0.10.2 From 42c8c99cd891184bf4bcf6f09d62c54e42599453 Mon Sep 17 00:00:00 2001 From: Zhao Jin Date: Sat, 27 Aug 2011 00:26:17 +0800 Subject: slab, cleanup: remove unneeded return The procedure ends right after the if-statement, so remove ``return''. Also move the last common statement outside. Signed-off-by: Zhao Jin Acked-by: David Rientjes Acked-by: Christoph Lameter Signed-off-by: Pekka Enberg diff --git a/mm/slab.c b/mm/slab.c index f0bd785..806a754 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -3693,13 +3693,12 @@ static inline void __cache_free(struct kmem_cache *cachep, void *objp, if (likely(ac->avail < ac->limit)) { STATS_INC_FREEHIT(cachep); - ac->entry[ac->avail++] = objp; - return; } else { STATS_INC_FREEMISS(cachep); cache_flusharray(cachep, ac); - ac->entry[ac->avail++] = objp; } + + ac->entry[ac->avail++] = objp; } /** -- cgit v0.10.2 From 5fbebcbdb3730666c0d1d22021a90d8483fc8e02 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 Jan 2012 14:07:18 +0900 Subject: sh: intc: Make global intc controller counter static. No need to expose this globally since it's only used for core accounting. Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index e53e449..c64690d 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -35,7 +35,7 @@ LIST_HEAD(intc_list); DEFINE_RAW_SPINLOCK(intc_big_lock); -unsigned int nr_intc_controllers; +static unsigned int nr_intc_controllers; /* * Default priority level diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h index b0e9155..422b72d 100644 --- a/drivers/sh/intc/internals.h +++ b/drivers/sh/intc/internals.h @@ -157,7 +157,6 @@ void _intc_enable(struct irq_data *data, unsigned long handle); /* core.c */ extern struct list_head intc_list; extern raw_spinlock_t intc_big_lock; -extern unsigned int nr_intc_controllers; extern struct bus_type intc_subsys; unsigned int intc_get_dfl_prio_level(void); -- cgit v0.10.2 From 5bbda4e4aca4591c85ee53dea157ca5fc9a23306 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 Jan 2012 14:54:10 +0900 Subject: sh: intc: Prefer IRQCHIP_SKIP_SET_WAKE over a dummy set_wake callback. It's possible to use IRQCHIP_SKIP_SET_WAKE to get the behaviour that we're after, without having to bother with a dummy ->set_wake() callback for the IRQ chip. Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index 7b246ef..3679645 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -58,11 +58,6 @@ static void intc_disable(struct irq_data *data) } } -static int intc_set_wake(struct irq_data *data, unsigned int on) -{ - return 0; /* allow wakeup, but setup hardware in intc_suspend() */ -} - #ifdef CONFIG_SMP /* * This is held with the irq desc lock held, so we don't require any @@ -225,8 +220,8 @@ struct irq_chip intc_irq_chip = { .irq_disable = intc_disable, .irq_shutdown = intc_disable, .irq_set_type = intc_set_type, - .irq_set_wake = intc_set_wake, #ifdef CONFIG_SMP .irq_set_affinity = intc_set_affinity, #endif + .flags = IRQCHIP_SKIP_SET_WAKE, }; -- cgit v0.10.2 From 29775df10f02f614db870ff4acaf0b07dbed1547 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 Jan 2012 15:38:57 +0900 Subject: sh: intc: Kill off superfluous irq_shutdown hooking. This already gets handled via disable, as per the notes in linux/irq.h. Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index 3679645..d90cb7e 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -218,7 +218,6 @@ struct irq_chip intc_irq_chip = { .irq_mask_ack = intc_mask_ack, .irq_enable = intc_enable, .irq_disable = intc_disable, - .irq_shutdown = intc_disable, .irq_set_type = intc_set_type, #ifdef CONFIG_SMP .irq_set_affinity = intc_set_affinity, -- cgit v0.10.2 From 30377642138aadeef35a31c2f90dba0b6fa7b91a Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 Jan 2012 16:55:57 +0900 Subject: sh: intc: Use IRQ_SET_MASK_OK_NOCOPY for intc_set_affinity. intc_set_affinity() updates the cpumask in place, so there's no need for the upper layer to do this itself. Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index d90cb7e..db10adf 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -73,7 +73,7 @@ static int intc_set_affinity(struct irq_data *data, cpumask_copy(data->affinity, cpumask); - return 0; + return IRQ_SET_MASK_OK_NOCOPY; } #endif -- cgit v0.10.2 From b59f9f9775e643435bba76e30e59e47c19c56dee Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 24 Jan 2012 17:41:55 +0900 Subject: sh: intc: optimize intc IRQ lookup This ensures that the sense/prio lists are sorted at registration time, enabling us to use a simple binary search for an optimized lookup (something that had been on the TODO for some time). Signed-off-by: Paul Mundt diff --git a/drivers/sh/intc/chip.c b/drivers/sh/intc/chip.c index db10adf..012df26 100644 --- a/drivers/sh/intc/chip.c +++ b/drivers/sh/intc/chip.c @@ -2,13 +2,14 @@ * IRQ chip definitions for INTC IRQs. * * Copyright (C) 2007, 2008 Magnus Damm - * Copyright (C) 2009, 2010 Paul Mundt + * Copyright (C) 2009 - 2012 Paul Mundt * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. */ #include +#include #include #include "internals.h" @@ -117,28 +118,12 @@ static struct intc_handle_int *intc_find_irq(struct intc_handle_int *hp, unsigned int nr_hp, unsigned int irq) { - int i; - - /* - * this doesn't scale well, but... - * - * this function should only be used for cerain uncommon - * operations such as intc_set_priority() and intc_set_type() - * and in those rare cases performance doesn't matter that much. - * keeping the memory footprint low is more important. - * - * one rather simple way to speed this up and still keep the - * memory footprint down is to make sure the array is sorted - * and then perform a bisect to lookup the irq. - */ - for (i = 0; i < nr_hp; i++) { - if ((hp + i)->irq != irq) - continue; + struct intc_handle_int key; - return hp + i; - } + key.irq = irq; + key.handle = 0; - return NULL; + return bsearch(&key, hp, nr_hp, sizeof(*hp), intc_handle_int_cmp); } int intc_set_priority(unsigned int irq, unsigned int prio) diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index c64690d..8e1fcd5 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -2,7 +2,7 @@ * Shared interrupt handling code for IPR and INTC2 types of IRQs. * * Copyright (C) 2007, 2008 Magnus Damm - * Copyright (C) 2009, 2010 Paul Mundt + * Copyright (C) 2009 - 2012 Paul Mundt * * Based on intc2.c and ipr.c * @@ -31,6 +31,7 @@ #include #include #include +#include #include "internals.h" LIST_HEAD(intc_list); @@ -267,6 +268,9 @@ int __init register_intc_controller(struct intc_desc *desc) k += save_reg(d, k, hw->prio_regs[i].set_reg, smp); k += save_reg(d, k, hw->prio_regs[i].clr_reg, smp); } + + sort(d->prio, hw->nr_prio_regs, sizeof(*d->prio), + intc_handle_int_cmp, NULL); } if (hw->sense_regs) { @@ -277,6 +281,9 @@ int __init register_intc_controller(struct intc_desc *desc) for (i = 0; i < hw->nr_sense_regs; i++) k += save_reg(d, k, hw->sense_regs[i].reg, 0); + + sort(d->sense, hw->nr_sense_regs, sizeof(*d->sense), + intc_handle_int_cmp, NULL); } if (hw->subgroups) diff --git a/drivers/sh/intc/internals.h b/drivers/sh/intc/internals.h index 422b72d..f034a97 100644 --- a/drivers/sh/intc/internals.h +++ b/drivers/sh/intc/internals.h @@ -108,6 +108,14 @@ static inline void activate_irq(int irq) #endif } +static inline int intc_handle_int_cmp(const void *a, const void *b) +{ + const struct intc_handle_int *_a = a; + const struct intc_handle_int *_b = b; + + return _a->irq - _b->irq; +} + /* access.c */ extern unsigned long (*intc_reg_fns[])(unsigned long addr, unsigned long h, unsigned long data); -- cgit v0.10.2 From 0ad9500e16fe24aa55809a2b00e0d2d0e658fc71 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 16 Dec 2011 16:25:34 +0100 Subject: slub: prefetch next freelist pointer in slab_alloc() Recycling a page is a problem, since freelist link chain is hot on cpu(s) which freed objects, and possibly very cold on cpu currently owning slab. Adding a prefetch of cache line containing the pointer to next object in slab_alloc() helps a lot in many workloads, in particular on assymetric ones (allocations done on one cpu, frees on another cpus). Added cost is three machine instructions only. Examples on my dual socket quad core ht machine (Intel CPU E5540 @2.53GHz) (16 logical cpus, 2 memory nodes), 64bit kernel. Before patch : # perf stat -r 32 hackbench 50 process 4000 >/dev/null Performance counter stats for 'hackbench 50 process 4000' (32 runs): 327577,471718 task-clock # 15,821 CPUs utilized ( +- 0,64% ) 28 866 491 context-switches # 0,088 M/sec ( +- 1,80% ) 1 506 929 CPU-migrations # 0,005 M/sec ( +- 3,24% ) 127 151 page-faults # 0,000 M/sec ( +- 0,16% ) 829 399 813 448 cycles # 2,532 GHz ( +- 0,64% ) 580 664 691 740 stalled-cycles-frontend # 70,01% frontend cycles idle ( +- 0,71% ) 197 431 700 448 stalled-cycles-backend # 23,80% backend cycles idle ( +- 1,03% ) 503 548 648 975 instructions # 0,61 insns per cycle # 1,15 stalled cycles per insn ( +- 0,46% ) 95 780 068 471 branches # 292,389 M/sec ( +- 0,48% ) 1 426 407 916 branch-misses # 1,49% of all branches ( +- 1,35% ) 20,705679994 seconds time elapsed ( +- 0,64% ) After patch : # perf stat -r 32 hackbench 50 process 4000 >/dev/null Performance counter stats for 'hackbench 50 process 4000' (32 runs): 286236,542804 task-clock # 15,786 CPUs utilized ( +- 1,32% ) 19 703 372 context-switches # 0,069 M/sec ( +- 4,99% ) 1 658 249 CPU-migrations # 0,006 M/sec ( +- 6,62% ) 126 776 page-faults # 0,000 M/sec ( +- 0,12% ) 724 636 593 213 cycles # 2,532 GHz ( +- 1,32% ) 499 320 714 837 stalled-cycles-frontend # 68,91% frontend cycles idle ( +- 1,47% ) 156 555 126 809 stalled-cycles-backend # 21,60% backend cycles idle ( +- 2,22% ) 463 897 792 661 instructions # 0,64 insns per cycle # 1,08 stalled cycles per insn ( +- 0,94% ) 87 717 352 563 branches # 306,451 M/sec ( +- 0,99% ) 941 738 280 branch-misses # 1,07% of all branches ( +- 3,35% ) 18,132070670 seconds time elapsed ( +- 1,30% ) Signed-off-by: Eric Dumazet Acked-by: Christoph Lameter CC: Matt Mackall CC: David Rientjes CC: "Alex,Shi" CC: Shaohua Li Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index 4907563..5b915e8 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -269,6 +269,11 @@ static inline void *get_freepointer(struct kmem_cache *s, void *object) return *(void **)(object + s->offset); } +static void prefetch_freepointer(const struct kmem_cache *s, void *object) +{ + prefetch(object + s->offset); +} + static inline void *get_freepointer_safe(struct kmem_cache *s, void *object) { void *p; @@ -2309,6 +2314,8 @@ redo: object = __slab_alloc(s, gfpflags, node, addr, c); else { + void *next_object = get_freepointer_safe(s, object); + /* * The cmpxchg will only match if there was no additional * operation and if we are on the right processor. @@ -2324,11 +2331,12 @@ redo: if (unlikely(!this_cpu_cmpxchg_double( s->cpu_slab->freelist, s->cpu_slab->tid, object, tid, - get_freepointer_safe(s, object), next_tid(tid)))) { + next_object, next_tid(tid)))) { note_cmpxchg_failure("slab_alloc", s, tid); goto redo; } + prefetch_freepointer(s, next_object); stat(s, ALLOC_FASTPATH); } -- cgit v0.10.2 From 2ed86b16eabe4efbf80cc725a8cbb5310746a2fc Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Wed, 25 Jan 2012 20:02:40 -0600 Subject: irq: make SPARSE_IRQ an optionally hidden option On ARM, we don't want SPARSE_IRQ to be a user visible option. Make SPARSE_IRQ visible based on MAY_HAVE_SPARSE_IRQ instead of depending on HAVE_SPARSE_IRQ. With this, SPARSE_IRQ is not visible on C6X and ARM. Signed-off-by: Rob Herring Cc: Russell King Cc: Mark Salter Cc: Aurelien Jacquiot Cc: Benjamin Herrenschmidt Cc: Paul Mackerras Cc: Paul Mundt Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" Cc: linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org Cc: linux-c6x-dev@linux-c6x.org Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-sh@vger.kernel.org diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 24626b0..30e7840 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -28,7 +28,6 @@ config ARM select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V6K || CPU_V7)) select HAVE_C_RECORDMCOUNT select HAVE_GENERIC_HARDIRQS - select HAVE_SPARSE_IRQ select GENERIC_IRQ_SHOW select CPU_PM if (SUSPEND || CPU_IDLE) select GENERIC_PCI_IOMAP diff --git a/arch/c6x/Kconfig b/arch/c6x/Kconfig index 26e67f0..2f58c61 100644 --- a/arch/c6x/Kconfig +++ b/arch/c6x/Kconfig @@ -11,7 +11,7 @@ config TMS320C6X select HAVE_DMA_API_DEBUG select HAVE_GENERIC_HARDIRQS select HAVE_MEMBLOCK - select HAVE_SPARSE_IRQ + select SPARSE_IRQ select OF select OF_EARLY_FLATTREE diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 1919634..06c1cf0 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -133,7 +133,7 @@ config PPC select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_HW_BREAKPOINT if PERF_EVENTS && PPC_BOOK3S_64 select HAVE_GENERIC_HARDIRQS - select HAVE_SPARSE_IRQ + select MAY_HAVE_SPARSE_IRQ select IRQ_PER_CPU select GENERIC_IRQ_SHOW select GENERIC_IRQ_SHOW_LEVEL diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 3c8db65..21b82a8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -22,7 +22,7 @@ config SUPERH select HAVE_SYSCALL_TRACEPOINTS select HAVE_REGS_AND_STACK_ACCESS_API select HAVE_GENERIC_HARDIRQS - select HAVE_SPARSE_IRQ + select MAY_HAVE_SPARSE_IRQ select IRQ_FORCED_THREADING select RTC_LIB select GENERIC_ATOMIC64 diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 864cc6e..fb2da44 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -69,7 +69,6 @@ config X86 select HAVE_ARCH_JUMP_LABEL select HAVE_TEXT_POKE_SMP select HAVE_GENERIC_HARDIRQS - select HAVE_SPARSE_IRQ select SPARSE_IRQ select GENERIC_FIND_FIRST_BIT select GENERIC_IRQ_PROBE diff --git a/kernel/irq/Kconfig b/kernel/irq/Kconfig index 5a38bf4..1f2dece 100644 --- a/kernel/irq/Kconfig +++ b/kernel/irq/Kconfig @@ -13,7 +13,7 @@ config GENERIC_HARDIRQS # Options selectable by the architecture code # Make sparse irq Kconfig switch below available -config HAVE_SPARSE_IRQ +config MAY_HAVE_SPARSE_IRQ bool # Enable the generic irq autoprobe mechanism @@ -61,8 +61,7 @@ config IRQ_FORCED_THREADING bool config SPARSE_IRQ - bool "Support sparse irq numbering" - depends on HAVE_SPARSE_IRQ + bool "Support sparse irq numbering" if MAY_HAVE_SPARSE_IRQ ---help--- Sparse irq numbering is useful for distro kernels that want -- cgit v0.10.2 From 9482ee7175d1c312c96ffc85c7c413b283cf847b Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 3 Jan 2012 17:10:17 -0600 Subject: sound: pxa2xx-ac97: include mach/irqs.h directly In preparation of removing mach/irqs.h include from asm/irq.h, include mach/irqs.h directly. Signed-off-by: Rob Herring diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c index d1aa421..0e9e822 100644 --- a/sound/arm/pxa2xx-ac97-lib.c +++ b/sound/arm/pxa2xx-ac97-lib.c @@ -21,7 +21,7 @@ #include #include -#include +#include #include #include -- cgit v0.10.2 From feefe73fcbb4dfc952d4185d80435fb8e053e2a7 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 3 Jan 2012 15:52:42 -0600 Subject: gpio: pxa: explicitly include mach/irqs.h In preparation to make mach/irqs.h optional and remove from asm/irq.h, directly include mach/irq.h to get MMP_GPIO_TO_IRQ and PXA_GPIO_TO_IRQ. Signed-off-by: Rob Herring diff --git a/drivers/gpio/gpio-pxa.c b/drivers/gpio/gpio-pxa.c index b2d3ee1..5689ce6 100644 --- a/drivers/gpio/gpio-pxa.c +++ b/drivers/gpio/gpio-pxa.c @@ -22,6 +22,8 @@ #include #include +#include + /* * We handle the GPIOs by banks, each bank covers up to 32 GPIOs with * one set of registers. The register offsets are organized below: -- cgit v0.10.2 From ba3e88acfbb0ba52ea9ae522e5ea74ac3927fc9c Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Sun, 15 Jan 2012 17:05:56 -0600 Subject: ARM: remove mc146818rtc.h from time.c mc146818rtc.h is not needed in time.c, so remove it. Signed-off-by: Rob Herring diff --git a/arch/arm/kernel/time.c b/arch/arm/kernel/time.c index 8c57dd3..6095517 100644 --- a/arch/arm/kernel/time.c +++ b/arch/arm/kernel/time.c @@ -25,8 +25,6 @@ #include #include -#include - #include #include #include -- cgit v0.10.2 From bd8abc9a32c9b7b8179e701699141566dd8f7eb8 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 3 Jan 2012 14:55:24 -0600 Subject: ARM: mc146818rtc: remove unnecessary include of mach/irqs.h The include of mach/irqs.h isn't needed, so remove it. Compiled CMOS rtc driver. Add a check to make sure nothing depends on RTC_IRQ. Signed-off-by: Rob Herring diff --git a/arch/arm/include/asm/mc146818rtc.h b/arch/arm/include/asm/mc146818rtc.h index 6b884d2..e8567bb 100644 --- a/arch/arm/include/asm/mc146818rtc.h +++ b/arch/arm/include/asm/mc146818rtc.h @@ -5,7 +5,9 @@ #define _ASM_MC146818RTC_H #include -#include +#include + +#define RTC_IRQ BUILD_BUG_ON(1) #ifndef RTC_PORT #define RTC_PORT(x) (0x70 + (x)) -- cgit v0.10.2 From bc0a15171a75a67f22ba85baa607f1ffc10751e3 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 3 Jan 2012 15:52:42 -0600 Subject: ARM: it8152: explicitly include mach/irqs.h In preparation to make mach/irqs.h optional, directly include mach/irq.h to get IRQ_BOARD_START. Signed-off-by: Rob Herring diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h index 43cab49..73f84fa 100644 --- a/arch/arm/include/asm/hardware/it8152.h +++ b/arch/arm/include/asm/hardware/it8152.h @@ -9,6 +9,9 @@ #ifndef __ASM_HARDWARE_IT8152_H #define __ASM_HARDWARE_IT8152_H + +#include + extern void __iomem *it8152_base_address; #define IT8152_IO_BASE (it8152_base_address + 0x03e00000) -- cgit v0.10.2 From 7f1e76370b717be264f0af54719182a96fb8f36d Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 17 Jan 2012 11:20:23 -0600 Subject: sh: intc: unify evt2irq/irq2evt macros for sh and arm Move evt2irq and irq2evt macros definitions out of sh and arm includes into a common location. Signed-off-by: Rob Herring diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index 060e564..34560ca 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -100,6 +100,10 @@ config MACH_MARZEN comment "SH-Mobile System Configuration" +config CPU_HAS_INTEVT + bool + default y + menu "Memory configuration" config MEMORY_START diff --git a/arch/arm/mach-shmobile/include/mach/irqs.h b/arch/arm/mach-shmobile/include/mach/irqs.h index dcb714f..828807d 100644 --- a/arch/arm/mach-shmobile/include/mach/irqs.h +++ b/arch/arm/mach-shmobile/include/mach/irqs.h @@ -1,15 +1,13 @@ #ifndef __ASM_MACH_IRQS_H #define __ASM_MACH_IRQS_H +#include + #define NR_IRQS 1024 /* GIC */ #define gic_spi(nr) ((nr) + 32) -/* INTCA */ -#define evt2irq(evt) (((evt) >> 5) - 16) -#define irq2evt(irq) (((irq) + 16) << 5) - /* INTCS */ #define INTCS_VECT_BASE 0x2200 #define INTCS_VECT(n, vect) INTC_VECT((n), INTCS_VECT_BASE + (vect)) diff --git a/arch/sh/include/asm/irq.h b/arch/sh/include/asm/irq.h index 45d08b6..2a62017 100644 --- a/arch/sh/include/asm/irq.h +++ b/arch/sh/include/asm/irq.h @@ -21,17 +21,6 @@ #define NO_IRQ_IGNORE ((unsigned int)-1) /* - * Convert back and forth between INTEVT and IRQ values. - */ -#ifdef CONFIG_CPU_HAS_INTEVT -#define evt2irq(evt) (((evt) >> 5) - 16) -#define irq2evt(irq) (((irq) + 16) << 5) -#else -#define evt2irq(evt) (evt) -#define irq2evt(irq) (irq) -#endif - -/* * Simple Mask Register Support */ extern void make_maskreg_irq(unsigned int irq); diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index b160645..e1a2ac5 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -3,6 +3,17 @@ #include +/* + * Convert back and forth between INTEVT and IRQ values. + */ +#ifdef CONFIG_CPU_HAS_INTEVT +#define evt2irq(evt) (((evt) >> 5) - 16) +#define irq2evt(irq) (((irq) + 16) << 5) +#else +#define evt2irq(evt) (evt) +#define irq2evt(irq) (irq) +#endif + typedef unsigned char intc_enum; struct intc_vect { -- cgit v0.10.2 From 0f55239348aa85021d8bf8b63d84a796fcc142a4 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 17 Jan 2012 13:10:25 -0600 Subject: sh: intc: remove dependency on NR_IRQS SH intc has a compile time dependency on NR_IRQS. Make this dependency a local define so that shmobile (and ARM in general) can have run-time NR_IRQS setting. Signed-off-by: Rob Herring diff --git a/drivers/sh/intc/balancing.c b/drivers/sh/intc/balancing.c index cec7a96..bc78080 100644 --- a/drivers/sh/intc/balancing.c +++ b/drivers/sh/intc/balancing.c @@ -9,7 +9,7 @@ */ #include "internals.h" -static unsigned long dist_handle[NR_IRQS]; +static unsigned long dist_handle[INTC_NR_IRQS]; void intc_balancing_enable(unsigned int irq) { diff --git a/drivers/sh/intc/core.c b/drivers/sh/intc/core.c index e53e449..2fde897 100644 --- a/drivers/sh/intc/core.c +++ b/drivers/sh/intc/core.c @@ -42,7 +42,7 @@ unsigned int nr_intc_controllers; * - this needs to be at least 2 for 5-bit priorities on 7780 */ static unsigned int default_prio_level = 2; /* 2 - 16 */ -static unsigned int intc_prio_level[NR_IRQS]; /* for now */ +static unsigned int intc_prio_level[INTC_NR_IRQS]; /* for now */ unsigned int intc_get_dfl_prio_level(void) { diff --git a/drivers/sh/intc/handle.c b/drivers/sh/intc/handle.c index 057ce56..f461d53 100644 --- a/drivers/sh/intc/handle.c +++ b/drivers/sh/intc/handle.c @@ -13,7 +13,7 @@ #include #include "internals.h" -static unsigned long ack_handle[NR_IRQS]; +static unsigned long ack_handle[INTC_NR_IRQS]; static intc_enum __init intc_grp_id(struct intc_desc *desc, intc_enum enum_id) diff --git a/drivers/sh/intc/virq.c b/drivers/sh/intc/virq.c index c7ec49f..93cec21 100644 --- a/drivers/sh/intc/virq.c +++ b/drivers/sh/intc/virq.c @@ -17,7 +17,7 @@ #include #include "internals.h" -static struct intc_map_entry intc_irq_xlate[NR_IRQS]; +static struct intc_map_entry intc_irq_xlate[INTC_NR_IRQS]; struct intc_virq_list { unsigned int irq; diff --git a/include/linux/sh_intc.h b/include/linux/sh_intc.h index e1a2ac5..6aed080 100644 --- a/include/linux/sh_intc.h +++ b/include/linux/sh_intc.h @@ -3,6 +3,12 @@ #include +#ifdef CONFIG_SUPERH +#define INTC_NR_IRQS 512 +#else +#define INTC_NR_IRQS 1024 +#endif + /* * Convert back and forth between INTEVT and IRQ values. */ -- cgit v0.10.2 From 8661fb92045c5710754d450ebb82461fcfa08b65 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Tue, 3 Jan 2012 16:50:40 -0600 Subject: ARM: mmp: remove NR_IRQS Remove NR_IRQS and add a per machine .nr_irqs setting. Clean-up namespace replacing usage of IRQ_BOARD_START with MMP_NR_IRQS. Signed-off-by: Rob Herring diff --git a/arch/arm/mach-mmp/aspenite.c b/arch/arm/mach-mmp/aspenite.c index 17cb760..5483d6f 100644 --- a/arch/arm/mach-mmp/aspenite.c +++ b/arch/arm/mach-mmp/aspenite.c @@ -24,6 +24,7 @@ #include #include #include +#include #include