From 3c57e89b467d1db6fda74d5c97112c8b9466dd97 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Wed, 16 Dec 2009 21:38:25 +0100 Subject: hwmon: New driver for AMD Family 10h/11h CPUs This adds a driver for the internal temperature sensor of AMD Family 10h and 11h CPUs. Signed-off-by: Clemens Ladisch Signed-off-by: Jean Delvare diff --git a/Documentation/hwmon/k10temp b/Documentation/hwmon/k10temp new file mode 100644 index 0000000..a7a18d4 --- /dev/null +++ b/Documentation/hwmon/k10temp @@ -0,0 +1,60 @@ +Kernel driver k10temp +===================== + +Supported chips: +* AMD Family 10h processors: + Socket F: Quad-Core/Six-Core/Embedded Opteron + Socket AM2+: Opteron, Phenom (II) X3/X4 + Socket AM3: Quad-Core Opteron, Athlon/Phenom II X2/X3/X4, Sempron II + Socket S1G3: Athlon II, Sempron, Turion II +* AMD Family 11h processors: + Socket S1G2: Athlon (X2), Sempron (X2), Turion X2 (Ultra) + + Prefix: 'k10temp' + Addresses scanned: PCI space + Datasheets: + BIOS and Kernel Developer's Guide (BKDG) For AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/31116.pdf + BIOS and Kernel Developer's Guide (BKDG) for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41256.pdf + Revision Guide for AMD Family 10h Processors: + http://support.amd.com/us/Processor_TechDocs/41322.pdf + Revision Guide for AMD Family 11h Processors: + http://support.amd.com/us/Processor_TechDocs/41788.pdf + AMD Family 11h Processor Power and Thermal Data Sheet for Notebooks: + http://support.amd.com/us/Processor_TechDocs/43373.pdf + AMD Family 10h Server and Workstation Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43374.pdf + AMD Family 10h Desktop Processor Power and Thermal Data Sheet: + http://support.amd.com/us/Processor_TechDocs/43375.pdf + +Author: Clemens Ladisch + +Description +----------- + +This driver permits reading of the internal temperature sensor of AMD +Family 10h and 11h processors. + +All these processors have a sensor, but on older revisions of Family 10h +processors, the sensor may return inconsistent values (erratum 319). The +driver will refuse to load on these revisions unless you specify the +"force=1" module parameter. + +There is one temperature measurement value, available as temp1_input in +sysfs. It is measured in degrees Celsius with a resolution of 1/8th degree. +Please note that it is defined as a relative value; to quote the AMD manual: + + Tctl is the processor temperature control value, used by the platform to + control cooling systems. Tctl is a non-physical temperature on an + arbitrary scale measured in degrees. It does _not_ represent an actual + physical temperature like die or case temperature. Instead, it specifies + the processor temperature relative to the point at which the system must + supply the maximum cooling for the processor's specified maximum case + temperature and maximum thermal power dissipation. + +The maximum value for Tctl is available in the file temp1_max. + +If the BIOS has enabled hardware temperature control, the threshold at +which the processor will throttle itself to avoid damage is available in +temp1_crit and temp1_crit_hyst. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 95ccbe3..665947f 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -228,6 +228,18 @@ config SENSORS_K8TEMP This driver can also be built as a module. If so, the module will be called k8temp. +config SENSORS_K10TEMP + tristate "AMD Phenom/Sempron/Turion/Opteron temperature sensor" + depends on X86 && PCI + help + If you say yes here you get support for the temperature + sensor(s) inside your CPU. Supported are later revisions of + the AMD Family 10h and all revisions of the AMD Family 11h + microarchitectures. + + This driver can also be built as a module. If so, the module + will be called k10temp. + config SENSORS_AMS tristate "Apple Motion Sensor driver" depends on PPC_PMAC && !PPC64 && INPUT && ((ADB_PMU && I2C = y) || (ADB_PMU && !I2C) || I2C) && EXPERIMENTAL diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 33c2ee1..da84a6a 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -53,6 +53,7 @@ obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o +obj-$(CONFIG_SENSORS_K10TEMP) += k10temp.o obj-$(CONFIG_SENSORS_LIS3LV02D) += lis3lv02d.o hp_accel.o obj-$(CONFIG_SENSORS_LIS3_SPI) += lis3lv02d.o lis3lv02d_spi.o obj-$(CONFIG_SENSORS_LM63) += lm63.o diff --git a/drivers/hwmon/k10temp.c b/drivers/hwmon/k10temp.c new file mode 100644 index 0000000..d8a26d1 --- /dev/null +++ b/drivers/hwmon/k10temp.c @@ -0,0 +1,197 @@ +/* + * k10temp.c - AMD Family 10h/11h processor hardware monitoring + * + * Copyright (c) 2009 Clemens Ladisch + * + * + * This driver is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License; either + * version 2 of the License, or (at your option) any later version. + * + * This driver is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. + * See the GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this driver; if not, see . + */ + +#include +#include +#include +#include +#include +#include +#include + +MODULE_DESCRIPTION("AMD Family 10h/11h CPU core temperature monitor"); +MODULE_AUTHOR("Clemens Ladisch "); +MODULE_LICENSE("GPL"); + +static bool force; +module_param(force, bool, 0444); +MODULE_PARM_DESC(force, "force loading on processors with erratum 319"); + +#define REG_HARDWARE_THERMAL_CONTROL 0x64 +#define HTC_ENABLE 0x00000001 + +#define REG_REPORTED_TEMPERATURE 0xa4 + +#define REG_NORTHBRIDGE_CAPABILITIES 0xe8 +#define NB_CAP_HTC 0x00000400 + +static ssize_t show_temp(struct device *dev, + struct device_attribute *attr, char *buf) +{ + u32 regval; + + pci_read_config_dword(to_pci_dev(dev), + REG_REPORTED_TEMPERATURE, ®val); + return sprintf(buf, "%u\n", (regval >> 21) * 125); +} + +static ssize_t show_temp_max(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "%d\n", 70 * 1000); +} + +static ssize_t show_temp_crit(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + int show_hyst = attr->index; + u32 regval; + int value; + + pci_read_config_dword(to_pci_dev(dev), + REG_HARDWARE_THERMAL_CONTROL, ®val); + value = ((regval >> 16) & 0x7f) * 500 + 52000; + if (show_hyst) + value -= ((regval >> 24) & 0xf) * 500; + return sprintf(buf, "%d\n", value); +} + +static ssize_t show_name(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return sprintf(buf, "k10temp\n"); +} + +static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL); +static DEVICE_ATTR(temp1_max, S_IRUGO, show_temp_max, NULL); +static SENSOR_DEVICE_ATTR(temp1_crit, S_IRUGO, show_temp_crit, NULL, 0); +static SENSOR_DEVICE_ATTR(temp1_crit_hyst, S_IRUGO, show_temp_crit, NULL, 1); +static DEVICE_ATTR(name, S_IRUGO, show_name, NULL); + +static bool __devinit has_erratum_319(void) +{ + /* + * Erratum 319: The thermal sensor of older Family 10h processors + * (B steppings) may be unreliable. + */ + return boot_cpu_data.x86 == 0x10 && boot_cpu_data.x86_model <= 2; +} + +static int __devinit k10temp_probe(struct pci_dev *pdev, + const struct pci_device_id *id) +{ + struct device *hwmon_dev; + u32 reg_caps, reg_htc; + int err; + + if (has_erratum_319() && !force) { + dev_err(&pdev->dev, + "unreliable CPU thermal sensor; monitoring disabled\n"); + err = -ENODEV; + goto exit; + } + + err = device_create_file(&pdev->dev, &dev_attr_temp1_input); + if (err) + goto exit; + err = device_create_file(&pdev->dev, &dev_attr_temp1_max); + if (err) + goto exit_remove; + + pci_read_config_dword(pdev, REG_NORTHBRIDGE_CAPABILITIES, ®_caps); + pci_read_config_dword(pdev, REG_HARDWARE_THERMAL_CONTROL, ®_htc); + if ((reg_caps & NB_CAP_HTC) && (reg_htc & HTC_ENABLE)) { + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + if (err) + goto exit_remove; + err = device_create_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); + if (err) + goto exit_remove; + } + + err = device_create_file(&pdev->dev, &dev_attr_name); + if (err) + goto exit_remove; + + hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(hwmon_dev)) { + err = PTR_ERR(hwmon_dev); + goto exit_remove; + } + dev_set_drvdata(&pdev->dev, hwmon_dev); + + if (has_erratum_319() && force) + dev_warn(&pdev->dev, + "unreliable CPU thermal sensor; check erratum 319\n"); + return 0; + +exit_remove: + device_remove_file(&pdev->dev, &dev_attr_name); + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + device_remove_file(&pdev->dev, &dev_attr_temp1_max); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); +exit: + return err; +} + +static void __devexit k10temp_remove(struct pci_dev *pdev) +{ + hwmon_device_unregister(dev_get_drvdata(&pdev->dev)); + device_remove_file(&pdev->dev, &dev_attr_name); + device_remove_file(&pdev->dev, &dev_attr_temp1_input); + device_remove_file(&pdev->dev, &dev_attr_temp1_max); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit.dev_attr); + device_remove_file(&pdev->dev, + &sensor_dev_attr_temp1_crit_hyst.dev_attr); + dev_set_drvdata(&pdev->dev, NULL); +} + +static struct pci_device_id k10temp_id_table[] = { + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC) }, + { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_11H_NB_MISC) }, + {} +}; +MODULE_DEVICE_TABLE(pci, k10temp_id_table); + +static struct pci_driver k10temp_driver = { + .name = "k10temp", + .id_table = k10temp_id_table, + .probe = k10temp_probe, + .remove = __devexit_p(k10temp_remove), +}; + +static int __init k10temp_init(void) +{ + return pci_register_driver(&k10temp_driver); +} + +static void __exit k10temp_exit(void) +{ + pci_unregister_driver(&k10temp_driver); +} + +module_init(k10temp_init) +module_exit(k10temp_exit) -- cgit v0.10.2 From a0e92d70f35b5fd7da8ec2160cda78b98e2113bc Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Dec 2009 21:38:26 +0100 Subject: hwmon: (smsc47m1) Only request I/O ports we really use The I/O area of the SMSC LPC47M1xx chips which we use, gives access to a lot of registers, some of which are related to fan speed monitoring and control, but many are not. At the moment, the smsc47m1 driver requests the whole I/O port range. This could easily result in resource conflicts with either ACPI or other drivers. Request only the I/O ports we really use, to prevent such conflicts. Signed-off-by: Jean Delvare Tested-by: Sean Fidler diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 8ad50fd..bfef223 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -481,13 +481,94 @@ static int __init smsc47m1_find(unsigned short *addr, return 0; } +#define CHECK 1 +#define REQUEST 2 +#define RELEASE 3 + +/* + * This function can be used to: + * - test for resource conflicts with ACPI + * - request the resources + * - release the resources + * We only allocate the I/O ports we really need, to minimize the risk of + * conflicts with ACPI or with other drivers. + */ +static int smsc47m1_handle_resources(unsigned short address, enum chips type, + int action, struct device *dev) +{ + static const u8 ports_m1[] = { + /* register, region length */ + 0x04, 1, + 0x33, 4, + 0x56, 7, + }; + + static const u8 ports_m2[] = { + /* register, region length */ + 0x04, 1, + 0x09, 1, + 0x2c, 2, + 0x35, 4, + 0x56, 7, + 0x69, 4, + }; + + int i, ports_size, err; + const u8 *ports; + + switch (type) { + case smsc47m1: + default: + ports = ports_m1; + ports_size = ARRAY_SIZE(ports_m1); + break; + case smsc47m2: + ports = ports_m2; + ports_size = ARRAY_SIZE(ports_m2); + break; + } + + for (i = 0; i + 1 < ports_size; i += 2) { + unsigned short start = address + ports[i]; + unsigned short len = ports[i + 1]; + + switch (action) { + case CHECK: + /* Only check for conflicts */ + err = acpi_check_region(start, len, DRVNAME); + if (err) + return err; + break; + case REQUEST: + /* Request the resources */ + if (!request_region(start, len, DRVNAME)) { + dev_err(dev, "Region 0x%hx-0x%hx already in " + "use!\n", start, start + len); + + /* Undo all requests */ + for (i -= 2; i >= 0; i -= 2) + release_region(address + ports[i], + ports[i + 1]); + return -EBUSY; + } + break; + case RELEASE: + /* Release the resources */ + release_region(start, len); + break; + } + } + + return 0; +} + static int __devinit smsc47m1_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct smsc47m1_sio_data *sio_data = dev->platform_data; struct smsc47m1_data *data; struct resource *res; - int err = 0; + int err; int fan1, fan2, fan3, pwm1, pwm2, pwm3; static const char *names[] = { @@ -496,12 +577,10 @@ static int __devinit smsc47m1_probe(struct platform_device *pdev) }; res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (!request_region(res->start, SMSC_EXTENT, DRVNAME)) { - dev_err(dev, "Region 0x%lx-0x%lx already in use!\n", - (unsigned long)res->start, - (unsigned long)res->end); - return -EBUSY; - } + err = smsc47m1_handle_resources(res->start, sio_data->type, + REQUEST, dev); + if (err < 0) + return err; if (!(data = kzalloc(sizeof(struct smsc47m1_data), GFP_KERNEL))) { err = -ENOMEM; @@ -637,7 +716,7 @@ error_free: platform_set_drvdata(pdev, NULL); kfree(data); error_release: - release_region(res->start, SMSC_EXTENT); + smsc47m1_handle_resources(res->start, sio_data->type, RELEASE, dev); return err; } @@ -650,7 +729,7 @@ static int __devexit smsc47m1_remove(struct platform_device *pdev) sysfs_remove_group(&pdev->dev.kobj, &smsc47m1_group); res = platform_get_resource(pdev, IORESOURCE_IO, 0); - release_region(res->start, SMSC_EXTENT); + smsc47m1_handle_resources(res->start, data->type, RELEASE, &pdev->dev); platform_set_drvdata(pdev, NULL); kfree(data); @@ -717,7 +796,7 @@ static int __init smsc47m1_device_add(unsigned short address, }; int err; - err = acpi_check_resource_conflict(&res); + err = smsc47m1_handle_resources(address, sio_data->type, CHECK, NULL); if (err) goto exit; -- cgit v0.10.2 From 3ecf44b312758d10be20539b06b2df5d77d59cdb Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Dec 2009 21:38:26 +0100 Subject: hwmon: (smsc47m1) Fail module loading on error If an error occurs during probing, there's no point in keeping the module in memory. Better fail the module loading early to make the problem more visible. Signed-off-by: Jean Delvare Tested-by: Sean Fidler diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index bfef223..92cca51 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -139,8 +139,7 @@ struct smsc47m1_sio_data { }; -static int smsc47m1_probe(struct platform_device *pdev); -static int __devexit smsc47m1_remove(struct platform_device *pdev); +static int __exit smsc47m1_remove(struct platform_device *pdev); static struct smsc47m1_data *smsc47m1_update_device(struct device *dev, int init); @@ -160,8 +159,7 @@ static struct platform_driver smsc47m1_driver = { .owner = THIS_MODULE, .name = DRVNAME, }, - .probe = smsc47m1_probe, - .remove = __devexit_p(smsc47m1_remove), + .remove = __exit_p(smsc47m1_remove), }; static ssize_t get_fan(struct device *dev, struct device_attribute @@ -562,7 +560,7 @@ static int smsc47m1_handle_resources(unsigned short address, enum chips type, return 0; } -static int __devinit smsc47m1_probe(struct platform_device *pdev) +static int __init smsc47m1_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct smsc47m1_sio_data *sio_data = dev->platform_data; @@ -720,7 +718,7 @@ error_release: return err; } -static int __devexit smsc47m1_remove(struct platform_device *pdev) +static int __exit smsc47m1_remove(struct platform_device *pdev) { struct smsc47m1_data *data = platform_get_drvdata(pdev); struct resource *res; @@ -845,27 +843,27 @@ static int __init sm_smsc47m1_init(void) if (smsc47m1_find(&address, &sio_data)) return -ENODEV; - err = platform_driver_register(&smsc47m1_driver); + /* Sets global pdev as a side effect */ + err = smsc47m1_device_add(address, &sio_data); if (err) goto exit; - /* Sets global pdev as a side effect */ - err = smsc47m1_device_add(address, &sio_data); + err = platform_driver_probe(&smsc47m1_driver, smsc47m1_probe); if (err) - goto exit_driver; + goto exit_device; return 0; -exit_driver: - platform_driver_unregister(&smsc47m1_driver); +exit_device: + platform_device_unregister(pdev); exit: return err; } static void __exit sm_smsc47m1_exit(void) { - platform_device_unregister(pdev); platform_driver_unregister(&smsc47m1_driver); + platform_device_unregister(pdev); } MODULE_AUTHOR("Mark D. Studebaker "); -- cgit v0.10.2 From fa0bff02239abdad446effef22e5db281cf3d562 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Wed, 16 Dec 2009 21:38:27 +0100 Subject: hwmon: (smsc47m1) Enable device if needed If the address is set but the device isn't enabled, attempt to enable it. If it won't work for any reason (resource conflict, no function enabled) the initial state is restored. The initial state is also restored on module unloading. Signed-off-by: Jean Delvare Tested-by: Sean Fidler diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c index 92cca51..9ca9781 100644 --- a/drivers/hwmon/smsc47m1.c +++ b/drivers/hwmon/smsc47m1.c @@ -136,6 +136,7 @@ struct smsc47m1_data { struct smsc47m1_sio_data { enum chips type; + u8 activate; /* Remember initial device state */ }; @@ -468,17 +469,38 @@ static int __init smsc47m1_find(unsigned short *addr, superio_select(); *addr = (superio_inb(SUPERIO_REG_BASE) << 8) | superio_inb(SUPERIO_REG_BASE + 1); - val = superio_inb(SUPERIO_REG_ACT); - if (*addr == 0 || (val & 0x01) == 0) { - pr_info(DRVNAME ": Device is disabled, will not use\n"); + if (*addr == 0) { + pr_info(DRVNAME ": Device address not set, will not use\n"); superio_exit(); return -ENODEV; } + /* Enable only if address is set (needed at least on the + * Compaq Presario S4000NX) */ + sio_data->activate = superio_inb(SUPERIO_REG_ACT); + if ((sio_data->activate & 0x01) == 0) { + pr_info(DRVNAME ": Enabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate | 0x01); + } + superio_exit(); return 0; } +/* Restore device to its initial state */ +static void __init smsc47m1_restore(const struct smsc47m1_sio_data *sio_data) +{ + if ((sio_data->activate & 0x01) == 0) { + superio_enter(); + superio_select(); + + pr_info(DRVNAME ": Disabling device\n"); + superio_outb(SUPERIO_REG_ACT, sio_data->activate); + + superio_exit(); + } +} + #define CHECK 1 #define REQUEST 2 #define RELEASE 3 @@ -856,6 +878,7 @@ static int __init sm_smsc47m1_init(void) exit_device: platform_device_unregister(pdev); + smsc47m1_restore(&sio_data); exit: return err; } @@ -863,6 +886,7 @@ exit: static void __exit sm_smsc47m1_exit(void) { platform_driver_unregister(&smsc47m1_driver); + smsc47m1_restore(pdev->dev.platform_data); platform_device_unregister(pdev); } -- cgit v0.10.2 From 70c38772aef27b01dc236fb4016261c3828df6aa Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Wed, 16 Dec 2009 21:38:28 +0100 Subject: hwmon: Add driver for VIA CPU core temperature This is a driver for the on-die digital temperature sensor of VIA's recent CPU models. [JD: Misc clean-ups.] Signed-off-by: Harald Welte Cc: Juerg Haefliger Signed-off-by: Jean Delvare Tested-by: Adam Nielsen diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 665947f..be8eead 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -822,6 +822,14 @@ config SENSORS_TMP421 This driver can also be built as a module. If so, the module will be called tmp421. +config SENSORS_VIA_CPUTEMP + tristate "VIA CPU temperature sensor" + depends on X86 + help + If you say yes here you get support for the temperature + sensor inside your CPU. Supported are all known variants of + the VIA C7 and Nano. + config SENSORS_VIA686A tristate "VIA686A" depends on PCI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index da84a6a..312b7c3 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -88,6 +88,7 @@ obj-$(CONFIG_SENSORS_SMSC47M192)+= smsc47m192.o obj-$(CONFIG_SENSORS_THMC50) += thmc50.o obj-$(CONFIG_SENSORS_TMP401) += tmp401.o obj-$(CONFIG_SENSORS_TMP421) += tmp421.o +obj-$(CONFIG_SENSORS_VIA_CPUTEMP)+= via-cputemp.o obj-$(CONFIG_SENSORS_VIA686A) += via686a.o obj-$(CONFIG_SENSORS_VT1211) += vt1211.o obj-$(CONFIG_SENSORS_VT8231) += vt8231.o diff --git a/drivers/hwmon/via-cputemp.c b/drivers/hwmon/via-cputemp.c new file mode 100644 index 0000000..7442cf7 --- /dev/null +++ b/drivers/hwmon/via-cputemp.c @@ -0,0 +1,356 @@ +/* + * via-cputemp.c - Driver for VIA CPU core temperature monitoring + * Copyright (C) 2009 VIA Technologies, Inc. + * + * based on existing coretemp.c, which is + * + * Copyright (C) 2007 Rudolf Marek + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA + * 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DRVNAME "via_cputemp" + +enum { SHOW_TEMP, SHOW_LABEL, SHOW_NAME } SHOW; + +/* + * Functions declaration + */ + +struct via_cputemp_data { + struct device *hwmon_dev; + const char *name; + u32 id; + u32 msr; +}; + +/* + * Sysfs stuff + */ + +static ssize_t show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + int ret; + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct via_cputemp_data *data = dev_get_drvdata(dev); + + if (attr->index == SHOW_NAME) + ret = sprintf(buf, "%s\n", data->name); + else /* show label */ + ret = sprintf(buf, "Core %d\n", data->id); + return ret; +} + +static ssize_t show_temp(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct via_cputemp_data *data = dev_get_drvdata(dev); + u32 eax, edx; + int err; + + err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + if (err) + return -EAGAIN; + + return sprintf(buf, "%lu\n", ((unsigned long)eax & 0xffffff) * 1000); +} + +static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, + SHOW_TEMP); +static SENSOR_DEVICE_ATTR(temp1_label, S_IRUGO, show_name, NULL, SHOW_LABEL); +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, SHOW_NAME); + +static struct attribute *via_cputemp_attributes[] = { + &sensor_dev_attr_name.dev_attr.attr, + &sensor_dev_attr_temp1_label.dev_attr.attr, + &sensor_dev_attr_temp1_input.dev_attr.attr, + NULL +}; + +static const struct attribute_group via_cputemp_group = { + .attrs = via_cputemp_attributes, +}; + +static int __devinit via_cputemp_probe(struct platform_device *pdev) +{ + struct via_cputemp_data *data; + struct cpuinfo_x86 *c = &cpu_data(pdev->id); + int err; + u32 eax, edx; + + data = kzalloc(sizeof(struct via_cputemp_data), GFP_KERNEL); + if (!data) { + err = -ENOMEM; + dev_err(&pdev->dev, "Out of memory\n"); + goto exit; + } + + data->id = pdev->id; + data->name = "via_cputemp"; + + switch (c->x86_model) { + case 0xA: + /* C7 A */ + case 0xD: + /* C7 D */ + data->msr = 0x1169; + break; + case 0xF: + /* Nano */ + data->msr = 0x1423; + break; + default: + err = -ENODEV; + goto exit_free; + } + + /* test if we can access the TEMPERATURE MSR */ + err = rdmsr_safe_on_cpu(data->id, data->msr, &eax, &edx); + if (err) { + dev_err(&pdev->dev, + "Unable to access TEMPERATURE MSR, giving up\n"); + goto exit_free; + } + + platform_set_drvdata(pdev, data); + + err = sysfs_create_group(&pdev->dev.kobj, &via_cputemp_group); + if (err) + goto exit_free; + + data->hwmon_dev = hwmon_device_register(&pdev->dev); + if (IS_ERR(data->hwmon_dev)) { + err = PTR_ERR(data->hwmon_dev); + dev_err(&pdev->dev, "Class registration failed (%d)\n", + err); + goto exit_remove; + } + + return 0; + +exit_remove: + sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); +exit_free: + platform_set_drvdata(pdev, NULL); + kfree(data); +exit: + return err; +} + +static int __devexit via_cputemp_remove(struct platform_device *pdev) +{ + struct via_cputemp_data *data = platform_get_drvdata(pdev); + + hwmon_device_unregister(data->hwmon_dev); + sysfs_remove_group(&pdev->dev.kobj, &via_cputemp_group); + platform_set_drvdata(pdev, NULL); + kfree(data); + return 0; +} + +static struct platform_driver via_cputemp_driver = { + .driver = { + .owner = THIS_MODULE, + .name = DRVNAME, + }, + .probe = via_cputemp_probe, + .remove = __devexit_p(via_cputemp_remove), +}; + +struct pdev_entry { + struct list_head list; + struct platform_device *pdev; + unsigned int cpu; +}; + +static LIST_HEAD(pdev_list); +static DEFINE_MUTEX(pdev_list_mutex); + +static int __cpuinit via_cputemp_device_add(unsigned int cpu) +{ + int err; + struct platform_device *pdev; + struct pdev_entry *pdev_entry; + + pdev = platform_device_alloc(DRVNAME, cpu); + if (!pdev) { + err = -ENOMEM; + printk(KERN_ERR DRVNAME ": Device allocation failed\n"); + goto exit; + } + + pdev_entry = kzalloc(sizeof(struct pdev_entry), GFP_KERNEL); + if (!pdev_entry) { + err = -ENOMEM; + goto exit_device_put; + } + + err = platform_device_add(pdev); + if (err) { + printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n", + err); + goto exit_device_free; + } + + pdev_entry->pdev = pdev; + pdev_entry->cpu = cpu; + mutex_lock(&pdev_list_mutex); + list_add_tail(&pdev_entry->list, &pdev_list); + mutex_unlock(&pdev_list_mutex); + + return 0; + +exit_device_free: + kfree(pdev_entry); +exit_device_put: + platform_device_put(pdev); +exit: + return err; +} + +#ifdef CONFIG_HOTPLUG_CPU +static void via_cputemp_device_remove(unsigned int cpu) +{ + struct pdev_entry *p, *n; + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + if (p->cpu == cpu) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + } + mutex_unlock(&pdev_list_mutex); +} + +static int __cpuinit via_cputemp_cpu_callback(struct notifier_block *nfb, + unsigned long action, void *hcpu) +{ + unsigned int cpu = (unsigned long) hcpu; + + switch (action) { + case CPU_ONLINE: + case CPU_DOWN_FAILED: + via_cputemp_device_add(cpu); + break; + case CPU_DOWN_PREPARE: + via_cputemp_device_remove(cpu); + break; + } + return NOTIFY_OK; +} + +static struct notifier_block via_cputemp_cpu_notifier __refdata = { + .notifier_call = via_cputemp_cpu_callback, +}; +#endif /* !CONFIG_HOTPLUG_CPU */ + +static int __init via_cputemp_init(void) +{ + int i, err; + struct pdev_entry *p, *n; + + if (cpu_data(0).x86_vendor != X86_VENDOR_CENTAUR) { + printk(KERN_DEBUG DRVNAME ": Not a VIA CPU\n"); + err = -ENODEV; + goto exit; + } + + err = platform_driver_register(&via_cputemp_driver); + if (err) + goto exit; + + for_each_online_cpu(i) { + struct cpuinfo_x86 *c = &cpu_data(i); + + if (c->x86 != 6) + continue; + + if (c->x86_model < 0x0a) + continue; + + if (c->x86_model > 0x0f) { + printk(KERN_WARNING DRVNAME ": Unknown CPU " + "model 0x%x\n", c->x86_model); + continue; + } + + err = via_cputemp_device_add(i); + if (err) + goto exit_devices_unreg; + } + if (list_empty(&pdev_list)) { + err = -ENODEV; + goto exit_driver_unreg; + } + +#ifdef CONFIG_HOTPLUG_CPU + register_hotcpu_notifier(&via_cputemp_cpu_notifier); +#endif + return 0; + +exit_devices_unreg: + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + mutex_unlock(&pdev_list_mutex); +exit_driver_unreg: + platform_driver_unregister(&via_cputemp_driver); +exit: + return err; +} + +static void __exit via_cputemp_exit(void) +{ + struct pdev_entry *p, *n; +#ifdef CONFIG_HOTPLUG_CPU + unregister_hotcpu_notifier(&via_cputemp_cpu_notifier); +#endif + mutex_lock(&pdev_list_mutex); + list_for_each_entry_safe(p, n, &pdev_list, list) { + platform_device_unregister(p->pdev); + list_del(&p->list); + kfree(p); + } + mutex_unlock(&pdev_list_mutex); + platform_driver_unregister(&via_cputemp_driver); +} + +MODULE_AUTHOR("Harald Welte "); +MODULE_DESCRIPTION("VIA CPU temperature monitor"); +MODULE_LICENSE("GPL"); + +module_init(via_cputemp_init) +module_exit(via_cputemp_exit) -- cgit v0.10.2 From 4235f684b66d6f00d2cd8849c884cf8f8b57ecad Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 16 Dec 2009 21:38:28 +0100 Subject: hwmon: (sht15) Off-by-one error in array index + incorrect constants Fix an off-by-one error in array index + incorrect constants. Signed-off-by: Christoph Walser Signed-off-by: Jonathan Cameron Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c index ebe38b6..864a371 100644 --- a/drivers/hwmon/sht15.c +++ b/drivers/hwmon/sht15.c @@ -305,7 +305,7 @@ static inline int sht15_calc_temp(struct sht15_data *data) int d1 = 0; int i; - for (i = 1; i < ARRAY_SIZE(temppoints) - 1; i++) + for (i = 1; i < ARRAY_SIZE(temppoints); i++) /* Find pointer to interpolate */ if (data->supply_uV > temppoints[i - 1].vdd) { d1 = (data->supply_uV/1000 - temppoints[i - 1].vdd) @@ -332,12 +332,12 @@ static inline int sht15_calc_humid(struct sht15_data *data) const int c1 = -4; const int c2 = 40500; /* x 10 ^ -6 */ - const int c3 = 2800; /* x10 ^ -9 */ + const int c3 = -2800; /* x10 ^ -9 */ RHlinear = c1*1000 + c2 * data->val_humid/1000 + (data->val_humid * data->val_humid * c3)/1000000; - return (temp - 25000) * (10000 + 800 * data->val_humid) + return (temp - 25000) * (10000 + 80 * data->val_humid) / 1000000 + RHlinear; } -- cgit v0.10.2 From c46c0e9188685c0276b4c0adf9fb7e903937e35b Mon Sep 17 00:00:00 2001 From: Christian Schulte Date: Wed, 16 Dec 2009 21:38:29 +0100 Subject: hwmon: (w83627hf) Fix for "No such device" The commit b72656dbc491484765776a16eeb55ef2e90efea6 introduced a bug leading to the w83627hf_find function no longer finding any chips. Signed-off-by: Christian Schulte Signed-off-by: Jean Delvare diff --git a/drivers/hwmon/w83627hf.c b/drivers/hwmon/w83627hf.c index b257c72..38e2805 100644 --- a/drivers/hwmon/w83627hf.c +++ b/drivers/hwmon/w83627hf.c @@ -1135,6 +1135,7 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, "W83687THF", }; + sio_data->sioaddr = sioaddr; superio_enter(sio_data); val = force_id ? force_id : superio_inb(sio_data, DEVID); switch (val) { @@ -1177,7 +1178,6 @@ static int __init w83627hf_find(int sioaddr, unsigned short *addr, } err = 0; - sio_data->sioaddr = sioaddr; pr_info(DRVNAME ": Found %s chip at %#x\n", names[sio_data->type], *addr); -- cgit v0.10.2