From e47f2509e5f182f4df144406de6f2bc78179d57e Mon Sep 17 00:00:00 2001 From: Fabio Baltieri Date: Thu, 25 Jul 2013 12:00:26 +0200 Subject: mac80211: use oneshot blink API for LED triggers Change mac80211 LED trigger code to use the generic led_trigger_blink_oneshot() API for transmit and receive activity indication. This gives a better feedback to the user, as with the new API each activity event results in a visible blink, while a constant traffic results in a continuous blink at constant rate. Signed-off-by: Fabio Baltieri [fix LED disabled build error] Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 3d32df1..d779383 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1094,7 +1094,6 @@ struct ieee80211_local { u32 dot11TransmittedFrameCount; #ifdef CONFIG_MAC80211_LEDS - int tx_led_counter, rx_led_counter; struct led_trigger *tx_led, *rx_led, *assoc_led, *radio_led; struct tpt_led_trigger *tpt_led_trigger; char tx_led_name[32], rx_led_name[32], diff --git a/net/mac80211/led.c b/net/mac80211/led.c index bcffa69..e2b8364 100644 --- a/net/mac80211/led.c +++ b/net/mac80211/led.c @@ -12,27 +12,22 @@ #include #include "led.h" +#define MAC80211_BLINK_DELAY 50 /* ms */ + void ieee80211_led_rx(struct ieee80211_local *local) { + unsigned long led_delay = MAC80211_BLINK_DELAY; if (unlikely(!local->rx_led)) return; - if (local->rx_led_counter++ % 2 == 0) - led_trigger_event(local->rx_led, LED_OFF); - else - led_trigger_event(local->rx_led, LED_FULL); + led_trigger_blink_oneshot(local->rx_led, &led_delay, &led_delay, 0); } -/* q is 1 if a packet was enqueued, 0 if it has been transmitted */ -void ieee80211_led_tx(struct ieee80211_local *local, int q) +void ieee80211_led_tx(struct ieee80211_local *local) { + unsigned long led_delay = MAC80211_BLINK_DELAY; if (unlikely(!local->tx_led)) return; - /* not sure how this is supposed to work ... */ - local->tx_led_counter += 2*q-1; - if (local->tx_led_counter % 2 == 0) - led_trigger_event(local->tx_led, LED_OFF); - else - led_trigger_event(local->tx_led, LED_FULL); + led_trigger_blink_oneshot(local->tx_led, &led_delay, &led_delay, 0); } void ieee80211_led_assoc(struct ieee80211_local *local, bool associated) diff --git a/net/mac80211/led.h b/net/mac80211/led.h index e0275d9..89f4344 100644 --- a/net/mac80211/led.h +++ b/net/mac80211/led.h @@ -13,7 +13,7 @@ #ifdef CONFIG_MAC80211_LEDS void ieee80211_led_rx(struct ieee80211_local *local); -void ieee80211_led_tx(struct ieee80211_local *local, int q); +void ieee80211_led_tx(struct ieee80211_local *local); void ieee80211_led_assoc(struct ieee80211_local *local, bool associated); void ieee80211_led_radio(struct ieee80211_local *local, @@ -27,7 +27,7 @@ void ieee80211_mod_tpt_led_trig(struct ieee80211_local *local, static inline void ieee80211_led_rx(struct ieee80211_local *local) { } -static inline void ieee80211_led_tx(struct ieee80211_local *local, int q) +static inline void ieee80211_led_tx(struct ieee80211_local *local) { } static inline void ieee80211_led_assoc(struct ieee80211_local *local, diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 6ad4c14..8eabfd9 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -564,7 +564,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) rcu_read_unlock(); - ieee80211_led_tx(local, 0); + ieee80211_led_tx(local); /* SNMP counters * Fragments are passed to low-level drivers as separate skbs, so these diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index be4d3ca..f65873f 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1300,7 +1300,6 @@ static bool __ieee80211_tx(struct ieee80211_local *local, txpending); ieee80211_tpt_led_trig_tx(local, fc, led_len); - ieee80211_led_tx(local, 1); WARN_ON_ONCE(!skb_queue_empty(skbs)); -- cgit v0.10.2 From dad9defd28912dc408763d461b9a6b1a762c07ea Mon Sep 17 00:00:00 2001 From: Antonio Quartulli Date: Fri, 26 Jul 2013 21:15:02 +0200 Subject: mac80211: ibss - remove not authorized station earlier A station which is not authorized has to be purged earlier to give it a chance to re-try to establish an IBSS/RSN session soon. Set the timeout to 10 seconds. Some refactoring has also been done to allow the IBSS submodule to have its own expiring function. Reported-by: Simon Wunderlich Signed-off-by: Antonio Quartulli Signed-off-by: Johannes Berg diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 5e6836c..e08387c 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -30,6 +30,7 @@ #define IEEE80211_IBSS_MERGE_INTERVAL (30 * HZ) #define IEEE80211_IBSS_INACTIVITY_LIMIT (60 * HZ) +#define IEEE80211_IBSS_RSN_INACTIVITY_LIMIT (10 * HZ) #define IEEE80211_IBSS_MAX_STA_ENTRIES 128 @@ -740,6 +741,33 @@ static int ieee80211_sta_active_ibss(struct ieee80211_sub_if_data *sdata) return active; } +static void ieee80211_ibss_sta_expire(struct ieee80211_sub_if_data *sdata) +{ + struct ieee80211_local *local = sdata->local; + struct sta_info *sta, *tmp; + unsigned long exp_time = IEEE80211_IBSS_INACTIVITY_LIMIT; + unsigned long exp_rsn_time = IEEE80211_IBSS_RSN_INACTIVITY_LIMIT; + + mutex_lock(&local->sta_mtx); + + list_for_each_entry_safe(sta, tmp, &local->sta_list, list) { + if (sdata != sta->sdata) + continue; + + if (time_after(jiffies, sta->last_rx + exp_time) || + (time_after(jiffies, sta->last_rx + exp_rsn_time) && + sta->sta_state != IEEE80211_STA_AUTHORIZED)) { + sta_dbg(sta->sdata, "expiring inactive %sSTA %pM\n", + sta->sta_state != IEEE80211_STA_AUTHORIZED ? + "not authorized " : "", sta->sta.addr); + + WARN_ON(__sta_info_destroy(sta)); + } + } + + mutex_unlock(&local->sta_mtx); +} + /* * This function is called with state == IEEE80211_IBSS_MLME_JOINED */ @@ -754,7 +782,7 @@ static void ieee80211_sta_merge_ibss(struct ieee80211_sub_if_data *sdata) mod_timer(&ifibss->timer, round_jiffies(jiffies + IEEE80211_IBSS_MERGE_INTERVAL)); - ieee80211_sta_expire(sdata, IEEE80211_IBSS_INACTIVITY_LIMIT); + ieee80211_ibss_sta_expire(sdata); if (time_before(jiffies, ifibss->last_scan_completed + IEEE80211_IBSS_MERGE_INTERVAL)) -- cgit v0.10.2 From dcb7a6ce0a08012a17cca34711a02017abed554b Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Fri, 26 Jul 2013 17:02:29 -0700 Subject: ieee80211: add definition for interworking support IEEE802.11u interworking support is advertised via extended capabilities IE bit 31. This is 7th bit of 4th byte of extended capabilities. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index b0dc87a..22c9094 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1860,6 +1860,11 @@ enum ieee80211_tdls_actioncode { WLAN_TDLS_DISCOVERY_REQUEST = 10, }; +/* Interworking capabilities are set in 7th bit of 4th byte of the + * @WLAN_EID_EXT_CAPABILITY information element + */ +#define WLAN_EXT_CAPA4_INTERWORKING_ENABLED BIT(7) + /* * TDLS capabililites to be enabled in the 5th byte of the * @WLAN_EID_EXT_CAPABILITY information element -- cgit v0.10.2 From 9e2bc79bce58a1ce0005015c9351b3bcaaa02e5c Mon Sep 17 00:00:00 2001 From: Fred Zhou Date: Thu, 1 Aug 2013 14:16:28 +0800 Subject: ieee80211: add definition for 802.11ac information elements Add element IDs for Extended BSS Load, VHT TX Power Envelope, AID, and Quiet Channel. Signed-off-by: Fred Zhou Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 22c9094..b3ce299 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1709,6 +1709,10 @@ enum ieee80211_eid { WLAN_EID_OPMODE_NOTIF = 199, WLAN_EID_WIDE_BW_CHANNEL_SWITCH = 194, WLAN_EID_CHANNEL_SWITCH_WRAPPER = 196, + WLAN_EID_EXTENDED_BSS_LOAD = 193, + WLAN_EID_VHT_TX_POWER_ENVELOPE = 195, + WLAN_EID_AID = 197, + WLAN_EID_QUIET_CHANNEL = 198, /* 802.11ad */ WLAN_EID_NON_TX_BSSID_CAP = 83, -- cgit v0.10.2 From a824131017a2c3c8f275c6eb46740cfb8a43f7c5 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Sat, 27 Jul 2013 11:47:04 +0200 Subject: mac80211: report some VHT radiotap infos for tx status The radiotap VHT info is 12 bytes (required to be aligned on 2) : u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* u8 bandwidth u8 mcs_nss[4] u8 coding u8 group_id u16 partial_aid ATM mac80211 can handle IEEE80211_RADIOTAP_VHT_KNOWN_{GI,BANDWIDTH} and mcs_nss[0] (i.e single user) in simple cases. This is more a placeholder to let sniffers give more clues for VHT, since we don't have yet the proper infrastructure/conventions in mac80211 for complete feedback (e.g consider dynamic BW). Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg diff --git a/net/mac80211/status.c b/net/mac80211/status.c index 8eabfd9..368837f 100644 --- a/net/mac80211/status.c +++ b/net/mac80211/status.c @@ -235,7 +235,8 @@ static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info) /* IEEE80211_RADIOTAP_RATE rate */ if (info->status.rates[0].idx >= 0 && - !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) + !(info->status.rates[0].flags & (IEEE80211_TX_RC_MCS | + IEEE80211_TX_RC_VHT_MCS))) len += 2; /* IEEE80211_RADIOTAP_TX_FLAGS */ @@ -244,16 +245,21 @@ static int ieee80211_tx_radiotap_len(struct ieee80211_tx_info *info) /* IEEE80211_RADIOTAP_DATA_RETRIES */ len += 1; - /* IEEE80211_TX_RC_MCS */ - if (info->status.rates[0].idx >= 0 && - info->status.rates[0].flags & IEEE80211_TX_RC_MCS) - len += 3; + /* IEEE80211_RADIOTAP_MCS + * IEEE80211_RADIOTAP_VHT */ + if (info->status.rates[0].idx >= 0) { + if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) + len += 3; + else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) + len = ALIGN(len, 2) + 12; + } return len; } static void -ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band *sband, +ieee80211_add_tx_radiotap_header(struct ieee80211_local *local, + struct ieee80211_supported_band *sband, struct sk_buff *skb, int retry_count, int rtap_len, int shift) { @@ -280,7 +286,8 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band *sband, /* IEEE80211_RADIOTAP_RATE */ if (info->status.rates[0].idx >= 0 && - !(info->status.rates[0].flags & IEEE80211_TX_RC_MCS)) { + !(info->status.rates[0].flags & (IEEE80211_TX_RC_MCS | + IEEE80211_TX_RC_VHT_MCS))) { u16 rate; rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_RATE); @@ -310,9 +317,12 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band *sband, *pos = retry_count; pos++; - /* IEEE80211_TX_RC_MCS */ - if (info->status.rates[0].idx >= 0 && - info->status.rates[0].flags & IEEE80211_TX_RC_MCS) { + if (info->status.rates[0].idx < 0) + return; + + /* IEEE80211_RADIOTAP_MCS + * IEEE80211_RADIOTAP_VHT */ + if (info->status.rates[0].flags & IEEE80211_TX_RC_MCS) { rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_MCS); pos[0] = IEEE80211_RADIOTAP_MCS_HAVE_MCS | IEEE80211_RADIOTAP_MCS_HAVE_GI | @@ -325,8 +335,48 @@ ieee80211_add_tx_radiotap_header(struct ieee80211_supported_band *sband, pos[1] |= IEEE80211_RADIOTAP_MCS_FMT_GF; pos[2] = info->status.rates[0].idx; pos += 3; - } + } else if (info->status.rates[0].flags & IEEE80211_TX_RC_VHT_MCS) { + u16 known = local->hw.radiotap_vht_details & + (IEEE80211_RADIOTAP_VHT_KNOWN_GI | + IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH); + + rthdr->it_present |= cpu_to_le32(1 << IEEE80211_RADIOTAP_VHT); + + /* required alignment from rthdr */ + pos = (u8 *)rthdr + ALIGN(pos - (u8 *)rthdr, 2); + /* u16 known - IEEE80211_RADIOTAP_VHT_KNOWN_* */ + put_unaligned_le16(known, pos); + pos += 2; + + /* u8 flags - IEEE80211_RADIOTAP_VHT_FLAG_* */ + if (info->status.rates[0].flags & IEEE80211_TX_RC_SHORT_GI) + *pos |= IEEE80211_RADIOTAP_VHT_FLAG_SGI; + pos++; + + /* u8 bandwidth */ + if (info->status.rates[0].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + *pos = 1; + else if (info->status.rates[0].flags & IEEE80211_TX_RC_80_MHZ_WIDTH) + *pos = 4; + else if (info->status.rates[0].flags & IEEE80211_TX_RC_160_MHZ_WIDTH) + *pos = 11; + else /* IEEE80211_TX_RC_{20_MHZ_WIDTH,FIXME:DUP_DATA} */ + *pos = 0; + pos++; + + /* u8 mcs_nss[4] */ + *pos = (ieee80211_rate_get_vht_mcs(&info->status.rates[0]) << 4) | + ieee80211_rate_get_vht_nss(&info->status.rates[0]); + pos += 4; + + /* u8 coding */ + pos++; + /* u8 group_id */ + pos++; + /* u16 partial_aid */ + pos += 2; + } } static void ieee80211_report_used_skb(struct ieee80211_local *local, @@ -631,8 +681,8 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb(skb); return; } - ieee80211_add_tx_radiotap_header(sband, skb, retry_count, rtap_len, - shift); + ieee80211_add_tx_radiotap_header(local, sband, skb, retry_count, + rtap_len, shift); /* XXX: is this sufficient for BPF? */ skb_set_mac_header(skb, 0); -- cgit v0.10.2 From 7cf1f14ecf1f5025abb0e30e22e8f7ad219fa32e Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 12 Jul 2013 10:40:31 +0200 Subject: mac80211: add debugfs for driver-buffered TID bitmap Add a per-station debugfs file indicating the TIDs (as a bitmap) that the driver has data buffered on. Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/debugfs_sta.c b/net/mac80211/debugfs_sta.c index 44e201d..19c54a4 100644 --- a/net/mac80211/debugfs_sta.c +++ b/net/mac80211/debugfs_sta.c @@ -455,6 +455,15 @@ void ieee80211_sta_debugfs_add(struct sta_info *sta) DEBUGFS_ADD_COUNTER(tx_retry_count, tx_retry_count); DEBUGFS_ADD_COUNTER(wep_weak_iv_count, wep_weak_iv_count); + if (sizeof(sta->driver_buffered_tids) == sizeof(u32)) + debugfs_create_x32("driver_buffered_tids", 0400, + sta->debugfs.dir, + (u32 *)&sta->driver_buffered_tids); + else + debugfs_create_x64("driver_buffered_tids", 0400, + sta->debugfs.dir, + (u64 *)&sta->driver_buffered_tids); + drv_sta_add_debugfs(local, sdata, &sta->sta, sta->debugfs.dir); } -- cgit v0.10.2 From 16ef1fe272332b2f7fd99236017b891db48d9cd6 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 11 Jul 2013 16:09:05 +0200 Subject: nl80211/cfg80211: add channel switch command To allow channel switch announcements within beacons, add the channel switch command to nl80211/cfg80211. This is implementation is intended for AP and (later) IBSS mode. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index aeaf6df..b7495c7 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -666,6 +666,30 @@ struct cfg80211_ap_settings { }; /** + * struct cfg80211_csa_settings - channel switch settings + * + * Used for channel switch + * + * @chandef: defines the channel to use after the switch + * @beacon_csa: beacon data while performing the switch + * @counter_offset_beacon: offset for the counter within the beacon (tail) + * @counter_offset_presp: offset for the counter within the probe response + * @beacon_after: beacon data to be used on the new channel + * @radar_required: whether radar detection is required on the new channel + * @block_tx: whether transmissions should be blocked while changing + * @count: number of beacons until switch + */ +struct cfg80211_csa_settings { + struct cfg80211_chan_def chandef; + struct cfg80211_beacon_data beacon_csa; + u16 counter_offset_beacon, counter_offset_presp; + struct cfg80211_beacon_data beacon_after; + bool radar_required; + bool block_tx; + u8 count; +}; + +/** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) * @STATION_PARAM_APPLY_CAPABILITY: apply new capability @@ -2139,6 +2163,8 @@ struct cfg80211_update_ft_ies_params { * @crit_proto_stop: Indicates critical protocol no longer needs increased link * reliability. This operation can not fail. * @set_coalesce: Set coalesce parameters. + * + * @channel_switch: initiate channel-switch procedure (with CSA) */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2376,6 +2402,10 @@ struct cfg80211_ops { struct wireless_dev *wdev); int (*set_coalesce)(struct wiphy *wiphy, struct cfg80211_coalesce *coalesce); + + int (*channel_switch)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_csa_settings *params); }; /* @@ -2441,6 +2471,8 @@ struct cfg80211_ops { * @WIPHY_FLAG_OFFCHAN_TX: Device supports direct off-channel TX. * @WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL: Device supports remain-on-channel call. * @WIPHY_FLAG_SUPPORTS_5_10_MHZ: Device supports 5 MHz and 10 MHz channels. + * @WIPHY_FLAG_HAS_CHANNEL_SWITCH: Device supports channel switch in + * beaconing mode (AP, IBSS, Mesh, ...). */ enum wiphy_flags { WIPHY_FLAG_CUSTOM_REGULATORY = BIT(0), @@ -2465,6 +2497,7 @@ enum wiphy_flags { WIPHY_FLAG_OFFCHAN_TX = BIT(20), WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL = BIT(21), WIPHY_FLAG_SUPPORTS_5_10_MHZ = BIT(22), + WIPHY_FLAG_HAS_CHANNEL_SWITCH = BIT(23), }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index eb68735..1f42bc3 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -676,6 +676,16 @@ * @NL80211_CMD_GET_COALESCE: Get currently supported coalesce rules. * @NL80211_CMD_SET_COALESCE: Configure coalesce rules or clear existing rules. * + * @NL80211_CMD_CHANNEL_SWITCH: Perform a channel switch by announcing the + * the new channel information (Channel Switch Announcement - CSA) + * in the beacon for some time (as defined in the + * %NL80211_ATTR_CH_SWITCH_COUNT parameter) and then change to the + * new channel. Userspace provides the new channel information (using + * %NL80211_ATTR_WIPHY_FREQ and the attributes determining channel + * width). %NL80211_ATTR_CH_SWITCH_BLOCK_TX may be supplied to inform + * other station that transmission must be blocked until the channel + * switch is complete. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -841,6 +851,8 @@ enum nl80211_commands { NL80211_CMD_GET_COALESCE, NL80211_CMD_SET_COALESCE, + NL80211_CMD_CHANNEL_SWITCH, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1469,6 +1481,18 @@ enum nl80211_commands { * * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. * + * @NL80211_ATTR_CH_SWITCH_COUNT: u32 attribute specifying the number of TBTT's + * until the channel switch event. + * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission + * must be blocked on the current channel (before the channel switch + * operation). + * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information + * for the time while performing a channel switch. + * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter + * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL). + * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter + * field in the probe response (%NL80211_ATTR_PROBE_RESP). + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1771,6 +1795,12 @@ enum nl80211_attrs { NL80211_ATTR_COALESCE_RULE, + NL80211_ATTR_CH_SWITCH_COUNT, + NL80211_ATTR_CH_SWITCH_BLOCK_TX, + NL80211_ATTR_CSA_IES, + NL80211_ATTR_CSA_C_OFF_BEACON, + NL80211_ATTR_CSA_C_OFF_PRESP, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 03d4ef9..f7cb121 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -349,6 +349,11 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_IE_RIC] = { .type = NLA_BINARY, .len = IEEE80211_MAX_DATA_LEN }, [NL80211_ATTR_PEER_AID] = { .type = NLA_U16 }, + [NL80211_ATTR_CH_SWITCH_COUNT] = { .type = NLA_U32 }, + [NL80211_ATTR_CH_SWITCH_BLOCK_TX] = { .type = NLA_FLAG }, + [NL80211_ATTR_CSA_IES] = { .type = NLA_NESTED }, + [NL80211_ATTR_CSA_C_OFF_BEACON] = { .type = NLA_U16 }, + [NL80211_ATTR_CSA_C_OFF_PRESP] = { .type = NLA_U16 }, }; /* policy for the key attributes */ @@ -1422,6 +1427,8 @@ static int nl80211_send_wiphy(struct cfg80211_registered_device *dev, if (state->split) { CMD(crit_proto_start, CRIT_PROTOCOL_START); CMD(crit_proto_stop, CRIT_PROTOCOL_STOP); + if (dev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH) + CMD(channel_switch, CHANNEL_SWITCH); } #ifdef CONFIG_NL80211_TESTMODE @@ -5613,6 +5620,111 @@ static int nl80211_start_radar_detection(struct sk_buff *skb, return err; } +static int nl80211_channel_switch(struct sk_buff *skb, struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_csa_settings params; + /* csa_attrs is defined static to avoid waste of stack size - this + * function is called under RTNL lock, so this should not be a problem. + */ + static struct nlattr *csa_attrs[NL80211_ATTR_MAX+1]; + u8 radar_detect_width = 0; + int err; + + if (!rdev->ops->channel_switch || + !(rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH)) + return -EOPNOTSUPP; + + /* may add IBSS support later */ + if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && + dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) + return -EOPNOTSUPP; + + memset(¶ms, 0, sizeof(params)); + + if (!info->attrs[NL80211_ATTR_WIPHY_FREQ] || + !info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]) + return -EINVAL; + + /* only important for AP, IBSS and mesh create IEs internally */ + if (!info->attrs[NL80211_ATTR_CSA_IES]) + return -EINVAL; + + /* useless if AP is not running */ + if (!wdev->beacon_interval) + return -EINVAL; + + params.count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]); + + err = nl80211_parse_beacon(info->attrs, ¶ms.beacon_after); + if (err) + return err; + + err = nla_parse_nested(csa_attrs, NL80211_ATTR_MAX, + info->attrs[NL80211_ATTR_CSA_IES], + nl80211_policy); + if (err) + return err; + + err = nl80211_parse_beacon(csa_attrs, ¶ms.beacon_csa); + if (err) + return err; + + if (!csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON]) + return -EINVAL; + + params.counter_offset_beacon = + nla_get_u16(csa_attrs[NL80211_ATTR_CSA_C_OFF_BEACON]); + if (params.counter_offset_beacon >= params.beacon_csa.tail_len) + return -EINVAL; + + /* sanity check - counters should be the same */ + if (params.beacon_csa.tail[params.counter_offset_beacon] != + params.count) + return -EINVAL; + + if (csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]) { + params.counter_offset_presp = + nla_get_u16(csa_attrs[NL80211_ATTR_CSA_C_OFF_PRESP]); + if (params.counter_offset_presp >= + params.beacon_csa.probe_resp_len) + return -EINVAL; + + if (params.beacon_csa.probe_resp[params.counter_offset_presp] != + params.count) + return -EINVAL; + } + + err = nl80211_parse_chandef(rdev, info, ¶ms.chandef); + if (err) + return err; + + if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef)) + return -EINVAL; + + err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef); + if (err < 0) { + return err; + } else if (err) { + radar_detect_width = BIT(params.chandef.width); + params.radar_required = true; + } + + err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, + params.chandef.chan, + CHAN_MODE_SHARED, + radar_detect_width); + if (err) + return err; + + if (info->attrs[NL80211_ATTR_CH_SWITCH_BLOCK_TX]) + params.block_tx = true; + + return rdev_channel_switch(rdev, dev, ¶ms); +} + static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, u32 seq, int flags, struct cfg80211_registered_device *rdev, @@ -9361,7 +9473,15 @@ static struct genl_ops nl80211_ops[] = { .flags = GENL_ADMIN_PERM, .internal_flags = NL80211_FLAG_NEED_WIPHY | NL80211_FLAG_NEED_RTNL, - } + }, + { + .cmd = NL80211_CMD_CHANNEL_SWITCH, + .doit = nl80211_channel_switch, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { diff --git a/net/wireless/rdev-ops.h b/net/wireless/rdev-ops.h index 9f15f0a..de870d4 100644 --- a/net/wireless/rdev-ops.h +++ b/net/wireless/rdev-ops.h @@ -923,4 +923,16 @@ static inline void rdev_crit_proto_stop(struct cfg80211_registered_device *rdev, trace_rdev_return_void(&rdev->wiphy); } +static inline int rdev_channel_switch(struct cfg80211_registered_device *rdev, + struct net_device *dev, + struct cfg80211_csa_settings *params) +{ + int ret; + + trace_rdev_channel_switch(&rdev->wiphy, dev, params); + ret = rdev->ops->channel_switch(&rdev->wiphy, dev, params); + trace_rdev_return_int(&rdev->wiphy, ret); + return ret; +} + #endif /* __CFG80211_RDEV_OPS */ diff --git a/net/wireless/trace.h b/net/wireless/trace.h index 09af6eb..f0ebdcd 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -1841,6 +1841,39 @@ TRACE_EVENT(rdev_crit_proto_stop, WIPHY_PR_ARG, WDEV_PR_ARG) ); +TRACE_EVENT(rdev_channel_switch, + TP_PROTO(struct wiphy *wiphy, struct net_device *netdev, + struct cfg80211_csa_settings *params), + TP_ARGS(wiphy, netdev, params), + TP_STRUCT__entry( + WIPHY_ENTRY + NETDEV_ENTRY + CHAN_DEF_ENTRY + __field(u16, counter_offset_beacon) + __field(u16, counter_offset_presp) + __field(bool, radar_required) + __field(bool, block_tx) + __field(u8, count) + ), + TP_fast_assign( + WIPHY_ASSIGN; + NETDEV_ASSIGN; + CHAN_DEF_ASSIGN(¶ms->chandef); + __entry->counter_offset_beacon = params->counter_offset_beacon; + __entry->counter_offset_presp = params->counter_offset_presp; + __entry->radar_required = params->radar_required; + __entry->block_tx = params->block_tx; + __entry->count = params->count; + ), + TP_printk(WIPHY_PR_FMT ", " NETDEV_PR_FMT ", " CHAN_DEF_PR_FMT + ", block_tx: %d, count: %u, radar_required: %d" + ", counter offsets (beacon/presp): %u/%u", + WIPHY_PR_ARG, NETDEV_PR_ARG, CHAN_DEF_PR_ARG, + __entry->block_tx, __entry->count, __entry->radar_required, + __entry->counter_offset_beacon, + __entry->counter_offset_presp) +); + /************************************************************* * cfg80211 exported functions traces * *************************************************************/ -- cgit v0.10.2 From 73da7d5bab79ad7e16ff44d67c3fe8b9c0b33e5b Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Thu, 11 Jul 2013 16:09:06 +0200 Subject: mac80211: add channel switch command and beacon callbacks The count field in CSA must be decremented with each beacon transmitted. This patch implements the functionality for drivers using ieee80211_beacon_get(). Other drivers must call back manually after reaching count == 0. This patch also contains the handling and finish worker for the channel switch command, and mac80211/chanctx code to allow to change a channel definition of an active channel context. Signed-off-by: Simon Wunderlich Signed-off-by: Mathias Kretschmer [small cleanups, catch identical chandef] Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 3124036..9cda372 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -152,11 +152,14 @@ struct ieee80211_low_level_stats { * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed + * @IEEE80211_CHANCTX_CHANGE_CHANNEL: switched to another operating channel, + * this is used only with channel switching with CSA */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1), IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2), + IEEE80211_CHANCTX_CHANGE_CHANNEL = BIT(3), }; /** @@ -1084,6 +1087,7 @@ enum ieee80211_vif_flags { * @addr: address of this interface * @p2p: indicates whether this AP or STA interface is a p2p * interface, i.e. a GO or p2p-sta respectively + * @csa_active: marks whether a channel switch is going on * @driver_flags: flags/capabilities the driver has for this interface, * these need to be set (or cleared) when the interface is added * or, if supported by the driver, the interface type is changed @@ -1106,6 +1110,7 @@ struct ieee80211_vif { struct ieee80211_bss_conf bss_conf; u8 addr[ETH_ALEN]; bool p2p; + bool csa_active; u8 cab_queue; u8 hw_queue[IEEE80211_NUM_ACS]; @@ -2637,6 +2642,16 @@ enum ieee80211_roc_type { * @ipv6_addr_change: IPv6 address assignment on the given interface changed. * Currently, this is only called for managed or P2P client interfaces. * This callback is optional; it must not sleep. + * + * @channel_switch_beacon: Starts a channel switch to a new channel. + * Beacons are modified to include CSA or ECSA IEs before calling this + * function. The corresponding count fields in these IEs must be + * decremented, and when they reach zero the driver must call + * ieee80211_csa_finish(). Drivers which use ieee80211_beacon_get() + * get the csa counter decremented by mac80211, but must check if it is + * zero using ieee80211_csa_is_complete() after the beacon has been + * transmitted and then call ieee80211_csa_finish(). + * */ struct ieee80211_ops { void (*tx)(struct ieee80211_hw *hw, @@ -2824,6 +2839,9 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct inet6_dev *idev); #endif + void (*channel_switch_beacon)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct cfg80211_chan_def *chandef); }; /** @@ -3319,6 +3337,25 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, } /** + * ieee80211_csa_finish - notify mac80211 about channel switch + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * After a channel switch announcement was scheduled and the counter in this + * announcement hit zero, this function must be called by the driver to + * notify mac80211 that the channel can be changed. + */ +void ieee80211_csa_finish(struct ieee80211_vif *vif); + +/** + * ieee80211_csa_is_complete - find out if counters reached zero + * @vif: &struct ieee80211_vif pointer from the add_interface callback. + * + * This function returns whether the channel switch counters reached zero. + */ +bool ieee80211_csa_is_complete(struct ieee80211_vif *vif); + + +/** * ieee80211_proberesp_get - retrieve a Probe Response template * @hw: pointer obtained from ieee80211_alloc_hw(). * @vif: &struct ieee80211_vif pointer from the add_interface callback. diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index b82fff6..44449ce 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -860,8 +860,8 @@ static int ieee80211_set_probe_resp(struct ieee80211_sub_if_data *sdata, return 0; } -static int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata, - struct cfg80211_beacon_data *params) +int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata, + struct cfg80211_beacon_data *params) { struct beacon_data *new, *old; int new_head_len, new_tail_len; @@ -1024,6 +1024,12 @@ static int ieee80211_change_beacon(struct wiphy *wiphy, struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); + /* don't allow changing the beacon while CSA is in place - offset + * of channel switch counter may change + */ + if (sdata->vif.csa_active) + return -EBUSY; + old = rtnl_dereference(sdata->u.ap.beacon); if (!old) return -ENOENT; @@ -1048,6 +1054,10 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) return -ENOENT; old_probe_resp = rtnl_dereference(sdata->u.ap.probe_resp); + /* abort any running channel switch */ + sdata->vif.csa_active = false; + cancel_work_sync(&sdata->csa_finalize_work); + /* turn off carrier for this interface and dependent VLANs */ list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) netif_carrier_off(vlan->dev); @@ -2775,6 +2785,178 @@ static int ieee80211_start_radar_detection(struct wiphy *wiphy, return 0; } +static struct cfg80211_beacon_data * +cfg80211_beacon_dup(struct cfg80211_beacon_data *beacon) +{ + struct cfg80211_beacon_data *new_beacon; + u8 *pos; + int len; + + len = beacon->head_len + beacon->tail_len + beacon->beacon_ies_len + + beacon->proberesp_ies_len + beacon->assocresp_ies_len + + beacon->probe_resp_len; + + new_beacon = kzalloc(sizeof(*new_beacon) + len, GFP_KERNEL); + if (!new_beacon) + return NULL; + + pos = (u8 *)(new_beacon + 1); + if (beacon->head_len) { + new_beacon->head_len = beacon->head_len; + new_beacon->head = pos; + memcpy(pos, beacon->head, beacon->head_len); + pos += beacon->head_len; + } + if (beacon->tail_len) { + new_beacon->tail_len = beacon->tail_len; + new_beacon->tail = pos; + memcpy(pos, beacon->tail, beacon->tail_len); + pos += beacon->tail_len; + } + if (beacon->beacon_ies_len) { + new_beacon->beacon_ies_len = beacon->beacon_ies_len; + new_beacon->beacon_ies = pos; + memcpy(pos, beacon->beacon_ies, beacon->beacon_ies_len); + pos += beacon->beacon_ies_len; + } + if (beacon->proberesp_ies_len) { + new_beacon->proberesp_ies_len = beacon->proberesp_ies_len; + new_beacon->proberesp_ies = pos; + memcpy(pos, beacon->proberesp_ies, beacon->proberesp_ies_len); + pos += beacon->proberesp_ies_len; + } + if (beacon->assocresp_ies_len) { + new_beacon->assocresp_ies_len = beacon->assocresp_ies_len; + new_beacon->assocresp_ies = pos; + memcpy(pos, beacon->assocresp_ies, beacon->assocresp_ies_len); + pos += beacon->assocresp_ies_len; + } + if (beacon->probe_resp_len) { + new_beacon->probe_resp_len = beacon->probe_resp_len; + beacon->probe_resp = pos; + memcpy(pos, beacon->probe_resp, beacon->probe_resp_len); + pos += beacon->probe_resp_len; + } + + return new_beacon; +} + +void ieee80211_csa_finalize_work(struct work_struct *work) +{ + struct ieee80211_sub_if_data *sdata = + container_of(work, struct ieee80211_sub_if_data, + csa_finalize_work); + struct ieee80211_local *local = sdata->local; + int err, changed; + + if (!ieee80211_sdata_running(sdata)) + return; + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP)) + return; + + sdata->radar_required = sdata->csa_radar_required; + err = ieee80211_vif_change_channel(sdata, &local->csa_chandef, + &changed); + if (WARN_ON(err < 0)) + return; + + err = ieee80211_assign_beacon(sdata, sdata->u.ap.next_beacon); + if (err < 0) + return; + + changed |= err; + kfree(sdata->u.ap.next_beacon); + sdata->u.ap.next_beacon = NULL; + sdata->vif.csa_active = false; + + ieee80211_wake_queues_by_reason(&sdata->local->hw, + IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_CSA); + + ieee80211_bss_info_change_notify(sdata, changed); + + cfg80211_ch_switch_notify(sdata->dev, &local->csa_chandef); +} + +static int ieee80211_channel_switch(struct wiphy *wiphy, struct net_device *dev, + struct cfg80211_csa_settings *params) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + struct ieee80211_chanctx_conf *chanctx_conf; + struct ieee80211_chanctx *chanctx; + int err, num_chanctx; + + if (!list_empty(&local->roc_list) || local->scanning) + return -EBUSY; + + if (sdata->wdev.cac_started) + return -EBUSY; + + if (cfg80211_chandef_identical(¶ms->chandef, + &sdata->vif.bss_conf.chandef)) + return -EINVAL; + + rcu_read_lock(); + chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); + if (!chanctx_conf) { + rcu_read_unlock(); + return -EBUSY; + } + + /* don't handle for multi-VIF cases */ + chanctx = container_of(chanctx_conf, struct ieee80211_chanctx, conf); + if (chanctx->refcount > 1) { + rcu_read_unlock(); + return -EBUSY; + } + num_chanctx = 0; + list_for_each_entry_rcu(chanctx, &local->chanctx_list, list) + num_chanctx++; + rcu_read_unlock(); + + if (num_chanctx > 1) + return -EBUSY; + + /* don't allow another channel switch if one is already active. */ + if (sdata->vif.csa_active) + return -EBUSY; + + /* only handle AP for now. */ + switch (sdata->vif.type) { + case NL80211_IFTYPE_AP: + break; + default: + return -EOPNOTSUPP; + } + + sdata->u.ap.next_beacon = cfg80211_beacon_dup(¶ms->beacon_after); + if (!sdata->u.ap.next_beacon) + return -ENOMEM; + + sdata->csa_counter_offset_beacon = params->counter_offset_beacon; + sdata->csa_counter_offset_presp = params->counter_offset_presp; + sdata->csa_radar_required = params->radar_required; + + if (params->block_tx) + ieee80211_stop_queues_by_reason(&local->hw, + IEEE80211_MAX_QUEUE_MAP, + IEEE80211_QUEUE_STOP_REASON_CSA); + + err = ieee80211_assign_beacon(sdata, ¶ms->beacon_csa); + if (err < 0) + return err; + + local->csa_chandef = params->chandef; + sdata->vif.csa_active = true; + + ieee80211_bss_info_change_notify(sdata, err); + drv_channel_switch_beacon(sdata, ¶ms->chandef); + + return 0; +} + static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, bool offchan, unsigned int wait, const u8 *buf, size_t len, @@ -3492,4 +3674,5 @@ struct cfg80211_ops mac80211_config_ops = { .get_et_strings = ieee80211_get_et_strings, .get_channel = ieee80211_cfg_get_channel, .start_radar_detection = ieee80211_start_radar_detection, + .channel_switch = ieee80211_channel_switch, }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 03e8d2e..3a4764b 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -410,6 +410,64 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, return ret; } +int ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_chanctx_conf *conf; + struct ieee80211_chanctx *ctx; + int ret; + u32 chanctx_changed = 0; + + /* should never be called if not performing a channel switch. */ + if (WARN_ON(!sdata->vif.csa_active)) + return -EINVAL; + + if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) + return -EINVAL; + + mutex_lock(&local->chanctx_mtx); + conf = rcu_dereference_protected(sdata->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + if (!conf) { + ret = -EINVAL; + goto out; + } + + ctx = container_of(conf, struct ieee80211_chanctx, conf); + if (ctx->refcount != 1) { + ret = -EINVAL; + goto out; + } + + if (sdata->vif.bss_conf.chandef.width != chandef->width) { + chanctx_changed = IEEE80211_CHANCTX_CHANGE_WIDTH; + *changed |= BSS_CHANGED_BANDWIDTH; + } + + sdata->vif.bss_conf.chandef = *chandef; + ctx->conf.def = *chandef; + + chanctx_changed |= IEEE80211_CHANCTX_CHANGE_CHANNEL; + drv_change_chanctx(local, ctx, chanctx_changed); + + if (!local->use_chanctx) { + local->_oper_chandef = *chandef; + ieee80211_hw_config(local, 0); + } + + ieee80211_recalc_chanctx_chantype(local, ctx); + ieee80211_recalc_smps_chanctx(local, ctx); + ieee80211_recalc_radar_chanctx(local, ctx); + + ret = 0; + out: + mutex_unlock(&local->chanctx_mtx); + return ret; +} + int ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, const struct cfg80211_chan_def *chandef, u32 *changed) diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index b931c96..b3ea11f 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -1072,4 +1072,17 @@ static inline void drv_ipv6_addr_change(struct ieee80211_local *local, } #endif +static inline void +drv_channel_switch_beacon(struct ieee80211_sub_if_data *sdata, + struct cfg80211_chan_def *chandef) +{ + struct ieee80211_local *local = sdata->local; + + if (local->ops->channel_switch_beacon) { + trace_drv_channel_switch_beacon(local, sdata, chandef); + local->ops->channel_switch_beacon(&local->hw, &sdata->vif, + chandef); + } +} + #endif /* __MAC80211_DRIVER_OPS */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d779383..e94c840 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -259,6 +259,8 @@ struct ieee80211_if_ap { struct beacon_data __rcu *beacon; struct probe_resp __rcu *probe_resp; + /* to be used after channel switch. */ + struct cfg80211_beacon_data *next_beacon; struct list_head vlans; struct ps_data ps; @@ -716,6 +718,11 @@ struct ieee80211_sub_if_data { struct ieee80211_tx_queue_params tx_conf[IEEE80211_NUM_ACS]; + struct work_struct csa_finalize_work; + int csa_counter_offset_beacon; + int csa_counter_offset_presp; + bool csa_radar_required; + /* used to reconfigure hardware SM PS */ struct work_struct recalc_smps; @@ -1372,6 +1379,9 @@ void ieee80211_roc_notify_destroy(struct ieee80211_roc_work *roc, bool free); void ieee80211_sw_roc_work(struct work_struct *work); void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc); +/* channel switch handling */ +void ieee80211_csa_finalize_work(struct work_struct *work); + /* interface handling */ int ieee80211_iface_init(void); void ieee80211_iface_exit(void); @@ -1393,6 +1403,8 @@ void ieee80211_del_virtual_monitor(struct ieee80211_local *local); bool __ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata); void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata); +int ieee80211_assign_beacon(struct ieee80211_sub_if_data *sdata, + struct cfg80211_beacon_data *params); static inline bool ieee80211_sdata_running(struct ieee80211_sub_if_data *sdata) { @@ -1654,6 +1666,11 @@ int __must_check ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, const struct cfg80211_chan_def *chandef, u32 *changed); +/* NOTE: only use ieee80211_vif_change_channel() for channel switch */ +int __must_check +ieee80211_vif_change_channel(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 4c41c11..7ca534b 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -274,6 +274,12 @@ static int ieee80211_check_concurrent_iface(struct ieee80211_sub_if_data *sdata, if (iftype == NL80211_IFTYPE_ADHOC && nsdata->vif.type == NL80211_IFTYPE_ADHOC) return -EBUSY; + /* + * will not add another interface while any channel + * switch is active. + */ + if (nsdata->vif.csa_active) + return -EBUSY; /* * The remaining checks are only performed for interfaces @@ -804,6 +810,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&local->dynamic_ps_enable_work); cancel_work_sync(&sdata->recalc_smps); + sdata->vif.csa_active = false; + cancel_work_sync(&sdata->csa_finalize_work); cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); @@ -1267,6 +1275,7 @@ static void ieee80211_setup_sdata(struct ieee80211_sub_if_data *sdata, skb_queue_head_init(&sdata->skb_queue); INIT_WORK(&sdata->work, ieee80211_iface_work); INIT_WORK(&sdata->recalc_smps, ieee80211_recalc_smps_work); + INIT_WORK(&sdata->csa_finalize_work, ieee80211_csa_finalize_work); switch (type) { case NL80211_IFTYPE_P2P_GO: diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index c215fafd7..1aba645 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1906,6 +1906,32 @@ TRACE_EVENT(api_radar_detected, ) ); +TRACE_EVENT(drv_channel_switch_beacon, + TP_PROTO(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata, + struct cfg80211_chan_def *chandef), + + TP_ARGS(local, sdata, chandef), + + TP_STRUCT__entry( + LOCAL_ENTRY + VIF_ENTRY + CHANDEF_ENTRY + ), + + TP_fast_assign( + LOCAL_ASSIGN; + VIF_ASSIGN; + CHANDEF_ASSIGN(chandef); + ), + + TP_printk( + LOCAL_PR_FMT VIF_PR_FMT " channel switch to " CHANDEF_PR_FMT, + LOCAL_PR_ARG, VIF_PR_ARG, CHANDEF_PR_ARG + ) +); + + #ifdef CONFIG_MAC80211_MESSAGE_TRACING #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index f65873f..0e42322 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2338,6 +2338,81 @@ static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, return 0; } +void ieee80211_csa_finish(struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + + ieee80211_queue_work(&sdata->local->hw, + &sdata->csa_finalize_work); +} +EXPORT_SYMBOL(ieee80211_csa_finish); + +static void ieee80211_update_csa(struct ieee80211_sub_if_data *sdata, + struct beacon_data *beacon) +{ + struct probe_resp *resp; + int counter_offset_beacon = sdata->csa_counter_offset_beacon; + int counter_offset_presp = sdata->csa_counter_offset_presp; + + /* warn if the driver did not check for/react to csa completeness */ + if (WARN_ON(((u8 *)beacon->tail)[counter_offset_beacon] == 0)) + return; + + ((u8 *)beacon->tail)[counter_offset_beacon]--; + + if (sdata->vif.type == NL80211_IFTYPE_AP && + counter_offset_presp) { + rcu_read_lock(); + resp = rcu_dereference(sdata->u.ap.probe_resp); + + /* if nl80211 accepted the offset, this should not happen. */ + if (WARN_ON(!resp)) { + rcu_read_unlock(); + return; + } + resp->data[counter_offset_presp]--; + rcu_read_unlock(); + } +} + +bool ieee80211_csa_is_complete(struct ieee80211_vif *vif) +{ + struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); + struct beacon_data *beacon = NULL; + u8 *beacon_data; + size_t beacon_data_len; + int counter_beacon = sdata->csa_counter_offset_beacon; + int ret = false; + + if (!ieee80211_sdata_running(sdata)) + return false; + + rcu_read_lock(); + if (vif->type == NL80211_IFTYPE_AP) { + struct ieee80211_if_ap *ap = &sdata->u.ap; + + beacon = rcu_dereference(ap->beacon); + if (WARN_ON(!beacon || !beacon->tail)) + goto out; + beacon_data = beacon->tail; + beacon_data_len = beacon->tail_len; + } else { + WARN_ON(1); + goto out; + } + + if (WARN_ON(counter_beacon > beacon_data_len)) + goto out; + + if (beacon_data[counter_beacon] == 0) + ret = true; + out: + rcu_read_unlock(); + + return ret; +} +EXPORT_SYMBOL(ieee80211_csa_is_complete); + struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct ieee80211_vif *vif, u16 *tim_offset, u16 *tim_length) @@ -2368,6 +2443,9 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, struct beacon_data *beacon = rcu_dereference(ap->beacon); if (beacon) { + if (sdata->vif.csa_active) + ieee80211_update_csa(sdata, beacon); + /* * headroom, head length, * tail length and maximum TIM length -- cgit v0.10.2