From c69029b179592b5bb6da3c356236b362055284a4 Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Wed, 7 Aug 2013 12:10:49 +0200 Subject: ath10k: setup peer UAPSD flag correctly Setup UAPSD peer/peer rate flags correctly. WMI_RC_UAPSD_FLAG is a peer rate capabilities flag and should not be set as a peer flag. Found during code review, doesn't fix a known issues. Signed-off-by: Janusz Dziedzic Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index cf2ba4d..505be82 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -973,7 +973,7 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar, sta->uapsd_queues, sta->max_sp); arg->peer_flags |= WMI_PEER_APSD; - arg->peer_flags |= WMI_RC_UAPSD_FLAG; + arg->peer_rate_caps |= WMI_RC_UAPSD_FLAG; if (sta->uapsd_queues & IEEE80211_WMM_IE_STA_QOSINFO_AC_VO) uapsd |= WMI_AP_PS_UAPSD_AC3_DELIVERY_EN | -- cgit v0.10.2 From 57a8930aecb641b7cfabd199c2c998b13894ba74 Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Wed, 7 Aug 2013 15:17:45 +0200 Subject: ath10k: Remove qca98xx hw1.0 support Since the firmware support is no longer available for hw1.0, drop all code (especially workarounds) for those units. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index f8b969f..9c9f081 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -76,36 +76,7 @@ static inline void ath10k_ce_src_ring_write_index_set(struct ath10k *ar, u32 ce_ctrl_addr, unsigned int n) { - struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - void __iomem *indicator_addr; - - if (!test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features)) { - ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n); - return; - } - - /* workaround for QCA988x_1.0 HW CE */ - indicator_addr = ar_pci->mem + ce_ctrl_addr + DST_WATERMARK_ADDRESS; - - if (ce_ctrl_addr == ath10k_ce_base_address(CDC_WAR_DATA_CE)) { - iowrite32((CDC_WAR_MAGIC_STR | n), indicator_addr); - } else { - unsigned long irq_flags; - local_irq_save(irq_flags); - iowrite32(1, indicator_addr); - - /* - * PCIE write waits for ACK in IPQ8K, there is no - * need to read back value. - */ - (void)ioread32(indicator_addr); - (void)ioread32(indicator_addr); /* conservative */ - - ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n); - - iowrite32(0, indicator_addr); - local_irq_restore(irq_flags); - } + ath10k_pci_write32(ar, ce_ctrl_addr + SR_WR_INDEX_ADDRESS, n); } static inline u32 ath10k_ce_src_ring_write_index_get(struct ath10k *ar, diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 7226c23..04c132e 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -39,17 +39,6 @@ MODULE_PARM_DESC(p2p, "Enable ath10k P2P support"); static const struct ath10k_hw_params ath10k_hw_params_list[] = { { - .id = QCA988X_HW_1_0_VERSION, - .name = "qca988x hw1.0", - .patch_load_addr = QCA988X_HW_1_0_PATCH_LOAD_ADDR, - .fw = { - .dir = QCA988X_HW_1_0_FW_DIR, - .fw = QCA988X_HW_1_0_FW_FILE, - .otp = QCA988X_HW_1_0_OTP_FILE, - .board = QCA988X_HW_1_0_BOARD_DATA_FILE, - }, - }, - { .id = QCA988X_HW_2_0_VERSION, .name = "qca988x hw2.0", .patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR, diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 44ed5af..373c2ef 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -26,14 +26,6 @@ #define SUPPORTED_FW_RELEASE 0 #define SUPPORTED_FW_BUILD 629 -/* QCA988X 1.0 definitions */ -#define QCA988X_HW_1_0_VERSION 0x4000002c -#define QCA988X_HW_1_0_FW_DIR "ath10k/QCA988X/hw1.0" -#define QCA988X_HW_1_0_FW_FILE "firmware.bin" -#define QCA988X_HW_1_0_OTP_FILE "otp.bin" -#define QCA988X_HW_1_0_BOARD_DATA_FILE "board.bin" -#define QCA988X_HW_1_0_PATCH_LOAD_ADDR 0x1234 - /* QCA988X 2.0 definitions */ #define QCA988X_HW_2_0_VERSION 0x4100016c #define QCA988X_HW_2_0_FW_DIR "ath10k/QCA988X/hw2.0" diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index e2f9ef5..4c94add 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -36,11 +36,9 @@ static unsigned int ath10k_target_ps; module_param(ath10k_target_ps, uint, 0644); MODULE_PARM_DESC(ath10k_target_ps, "Enable ath10k Target (SoC) PS option"); -#define QCA988X_1_0_DEVICE_ID (0xabcd) #define QCA988X_2_0_DEVICE_ID (0x003c) static DEFINE_PCI_DEVICE_TABLE(ath10k_pci_id_table) = { - { PCI_VDEVICE(ATHEROS, QCA988X_1_0_DEVICE_ID) }, /* PCI-E QCA988X V1 */ { PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */ {0} }; @@ -2269,9 +2267,6 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci) case ATH10K_PCI_FEATURE_MSI_X: ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n"); break; - case ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND: - ath10k_dbg(ATH10K_DBG_PCI, "QCA988X_1.0 workaround enabled\n"); - break; case ATH10K_PCI_FEATURE_SOC_POWER_SAVE: ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n"); break; @@ -2298,9 +2293,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev, ar_pci->dev = &pdev->dev; switch (pci_dev->device) { - case QCA988X_1_0_DEVICE_ID: - set_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features); - break; case QCA988X_2_0_DEVICE_ID: set_bit(ATH10K_PCI_FEATURE_MSI_X, ar_pci->features); break; @@ -2322,10 +2314,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev, goto err_ar_pci; } - /* Enable QCA988X_1.0 HW workarounds */ - if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features)) - spin_lock_init(&ar_pci->hw_v1_workaround_lock); - ar_pci->ar = ar; ar_pci->fw_indicator_address = FW_INDICATOR_ADDRESS; atomic_set(&ar_pci->keep_awake_count, 0); @@ -2483,9 +2471,6 @@ module_exit(ath10k_pci_exit); MODULE_AUTHOR("Qualcomm Atheros"); MODULE_DESCRIPTION("Driver support for Atheros QCA988X PCIe devices"); MODULE_LICENSE("Dual BSD/GPL"); -MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_FW_FILE); -MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_OTP_FILE); -MODULE_FIRMWARE(QCA988X_HW_1_0_FW_DIR "/" QCA988X_HW_1_0_BOARD_DATA_FILE); MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_FW_FILE); MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_OTP_FILE); MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE); diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 871bb33..b2439f5 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -152,8 +152,7 @@ struct service_to_pipe { enum ath10k_pci_features { ATH10K_PCI_FEATURE_MSI_X = 0, - ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND = 1, - ATH10K_PCI_FEATURE_SOC_POWER_SAVE = 2, + ATH10K_PCI_FEATURE_SOC_POWER_SAVE = 1, /* keep last */ ATH10K_PCI_FEATURE_COUNT @@ -234,9 +233,6 @@ struct ath10k_pci { /* Map CE id to ce_state */ struct ce_state *ce_id_to_state[CE_COUNT_MAX]; - - /* makes sure that dummy reads are atomic */ - spinlock_t hw_v1_workaround_lock; }; static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar) @@ -310,23 +306,8 @@ static inline void ath10k_pci_write32(struct ath10k *ar, u32 offset, u32 value) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - void __iomem *addr = ar_pci->mem; - - if (test_bit(ATH10K_PCI_FEATURE_HW_1_0_WORKAROUND, ar_pci->features)) { - unsigned long irq_flags; - - spin_lock_irqsave(&ar_pci->hw_v1_workaround_lock, irq_flags); - - ioread32(addr+offset+4); /* 3rd read prior to write */ - ioread32(addr+offset+4); /* 2nd read prior to write */ - ioread32(addr+offset+4); /* 1st read prior to write */ - iowrite32(value, addr+offset); - spin_unlock_irqrestore(&ar_pci->hw_v1_workaround_lock, - irq_flags); - } else { - iowrite32(value, addr+offset); - } + iowrite32(value, ar_pci->mem + offset); } static inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset) -- cgit v0.10.2 From 4e72b232a47fa773c49c4e63634df18be5ba3bb3 Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Wed, 7 Aug 2013 15:17:46 +0200 Subject: ath10k: update supported FW build version The latest supported and available FW build is 1.0.0.636. Reflect this in ath10k code. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 373c2ef..9868705 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -24,7 +24,7 @@ #define SUPPORTED_FW_MAJOR 1 #define SUPPORTED_FW_MINOR 0 #define SUPPORTED_FW_RELEASE 0 -#define SUPPORTED_FW_BUILD 629 +#define SUPPORTED_FW_BUILD 636 /* QCA988X 2.0 definitions */ #define QCA988X_HW_2_0_VERSION 0x4100016c -- cgit v0.10.2 From 9c5ae6915d6f8cf682006e4067de80d22431d92e Mon Sep 17 00:00:00 2001 From: Janusz Dziedzic Date: Fri, 9 Aug 2013 08:39:13 +0200 Subject: ath10k: check allocation errors in CE Handle pci_alloc_consistent(), kmalloc() errors in copy engine module. Found during code review. Signed-off-by: Janusz Dziedzic Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 9c9f081..8135d58 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -941,6 +941,12 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, (nentries * sizeof(struct ce_desc) + CE_DESC_RING_ALIGN), &base_addr); + if (!src_ring->base_addr_owner_space_unaligned) { + kfree(ce_state->src_ring); + ce_state->src_ring = NULL; + return -ENOMEM; + } + src_ring->base_addr_ce_space_unaligned = base_addr; src_ring->base_addr_owner_space = PTR_ALIGN( @@ -957,6 +963,16 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, src_ring->shadow_base_unaligned = kmalloc((nentries * sizeof(struct ce_desc) + CE_DESC_RING_ALIGN), GFP_KERNEL); + if (!src_ring->shadow_base_unaligned) { + pci_free_consistent(ar_pci->pdev, + (nentries * sizeof(struct ce_desc) + + CE_DESC_RING_ALIGN), + src_ring->base_addr_owner_space, + src_ring->base_addr_ce_space); + kfree(ce_state->src_ring); + ce_state->src_ring = NULL; + return -ENOMEM; + } src_ring->shadow_base = PTR_ALIGN( src_ring->shadow_base_unaligned, @@ -1026,6 +1042,12 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, (nentries * sizeof(struct ce_desc) + CE_DESC_RING_ALIGN), &base_addr); + if (!dest_ring->base_addr_owner_space_unaligned) { + kfree(ce_state->dest_ring); + ce_state->dest_ring = NULL; + return -ENOMEM; + } + dest_ring->base_addr_ce_space_unaligned = base_addr; /* -- cgit v0.10.2 From 7a53f3f38ad4746c82496293bfb48fae69d71c64 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 13 Aug 2013 07:54:54 +0200 Subject: ath10k: clean up monitor start code Remove useless code that was causing WARN_ON when a 80MHz+ vif entered promiscuous mode or monitor interface was started. The channel mode is already computed by chan_to_phymode(). Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 505be82..9637a949 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -503,13 +503,10 @@ static int ath10k_monitor_start(struct ath10k *ar, int vdev_id) { struct ieee80211_channel *channel = ar->hw->conf.chandef.chan; struct wmi_vdev_start_request_arg arg = {}; - enum nl80211_channel_type type; int ret = 0; lockdep_assert_held(&ar->conf_mutex); - type = cfg80211_get_chandef_type(&ar->hw->conf.chandef); - arg.vdev_id = vdev_id; arg.channel.freq = channel->center_freq; arg.channel.band_center_freq1 = ar->hw->conf.chandef.center_freq1; -- cgit v0.10.2 From ffe5daa873d37b56203dce4e8e55a4fab26b796d Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 13 Aug 2013 07:54:55 +0200 Subject: ath10k: use sizeof(*var) in kmalloc This fixes checkpatch warning from the latest 3.11-rc kernel tree. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 4c94add..8d24c69 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -803,8 +803,7 @@ static int ath10k_pci_start_ce(struct ath10k *ar) continue; for (i = 0; i < completions; i++) { - compl = kmalloc(sizeof(struct ath10k_pci_compl), - GFP_KERNEL); + compl = kmalloc(sizeof(*compl), GFP_KERNEL); if (!compl) { ath10k_warn("No memory for completion state\n"); ath10k_pci_stop_ce(ar); -- cgit v0.10.2 From f9d8fece02796f3776a712be3bcfa4c075afe942 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 13 Aug 2013 07:54:56 +0200 Subject: ath10k: clean up PCI completion states Improve code readability by using enum and a switch-case. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 8d24c69..996efdd 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -538,7 +538,7 @@ static void ath10k_pci_ce_send_done(struct ce_state *ce_state, if (!compl) break; - compl->send_or_recv = HIF_CE_COMPLETE_SEND; + compl->state = ATH10K_PCI_COMPL_SEND; compl->ce_state = ce_state; compl->pipe_info = pipe_info; compl->transfer_context = transfer_context; @@ -588,7 +588,7 @@ static void ath10k_pci_ce_recv_data(struct ce_state *ce_state, if (!compl) break; - compl->send_or_recv = HIF_CE_COMPLETE_RECV; + compl->state = ATH10K_PCI_COMPL_RECV; compl->ce_state = ce_state; compl->pipe_info = pipe_info; compl->transfer_context = transfer_context; @@ -810,7 +810,7 @@ static int ath10k_pci_start_ce(struct ath10k *ar) return -ENOMEM; } - compl->send_or_recv = HIF_CE_COMPLETE_FREE; + compl->state = ATH10K_PCI_COMPL_FREE; list_add_tail(&compl->list, &pipe_info->compl_free); } } @@ -909,12 +909,14 @@ static void ath10k_pci_process_ce(struct ath10k *ar) list_del(&compl->list); spin_unlock_bh(&ar_pci->compl_lock); - if (compl->send_or_recv == HIF_CE_COMPLETE_SEND) { + switch (compl->state) { + case ATH10K_PCI_COMPL_SEND: cb->tx_completion(ar, compl->transfer_context, compl->transfer_id); send_done = 1; - } else { + break; + case ATH10K_PCI_COMPL_RECV: ret = ath10k_pci_post_rx_pipe(compl->pipe_info, 1); if (ret) { ath10k_warn("Unable to post recv buffer for pipe: %d\n", @@ -941,9 +943,17 @@ static void ath10k_pci_process_ce(struct ath10k *ar) nbytes, skb->len + skb_tailroom(skb)); } + break; + case ATH10K_PCI_COMPL_FREE: + ath10k_warn("free completion cannot be processed\n"); + break; + default: + ath10k_warn("invalid completion state (%d)\n", + compl->state); + break; } - compl->send_or_recv = HIF_CE_COMPLETE_FREE; + compl->state = ATH10K_PCI_COMPL_FREE; /* * Add completion back to the pipe's free list. diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index b2439f5..153ae28 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -43,9 +43,15 @@ struct bmi_xfer { u32 resp_len; }; +enum ath10k_pci_compl_state { + ATH10K_PCI_COMPL_FREE = 0, + ATH10K_PCI_COMPL_SEND, + ATH10K_PCI_COMPL_RECV, +}; + struct ath10k_pci_compl { struct list_head list; - int send_or_recv; + enum ath10k_pci_compl_state state; struct ce_state *ce_state; struct hif_ce_pipe_info *pipe_info; void *transfer_context; @@ -54,11 +60,6 @@ struct ath10k_pci_compl { unsigned int flags; }; -/* compl_state.send_or_recv */ -#define HIF_CE_COMPLETE_FREE 0 -#define HIF_CE_COMPLETE_SEND 1 -#define HIF_CE_COMPLETE_RECV 2 - /* * PCI-specific Target state * -- cgit v0.10.2 From ba7ee55f8c10e07dd15dbfd7ac20a300bb673316 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 13 Aug 2013 07:54:57 +0200 Subject: ath10k: print errcode when CE ring setup fails This makes it possible to see the reason why the setup fails. It also adheres to code style of error checking in ath drivers. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 8135d58..1a702e1 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -1121,6 +1121,7 @@ struct ce_state *ath10k_ce_init(struct ath10k *ar, { struct ce_state *ce_state; u32 ctrl_addr = ath10k_ce_base_address(ce_id); + int ret; ce_state = ath10k_ce_init_state(ar, ce_id, attr); if (!ce_state) { @@ -1129,18 +1130,20 @@ struct ce_state *ath10k_ce_init(struct ath10k *ar, } if (attr->src_nentries) { - if (ath10k_ce_init_src_ring(ar, ce_id, ce_state, attr)) { - ath10k_err("Failed to initialize CE src ring for ID: %d\n", - ce_id); + ret = ath10k_ce_init_src_ring(ar, ce_id, ce_state, attr); + if (ret) { + ath10k_err("Failed to initialize CE src ring for ID: %d (%d)\n", + ce_id, ret); ath10k_ce_deinit(ce_state); return NULL; } } if (attr->dest_nentries) { - if (ath10k_ce_init_dest_ring(ar, ce_id, ce_state, attr)) { - ath10k_err("Failed to initialize CE dest ring for ID: %d\n", - ce_id); + ret = ath10k_ce_init_dest_ring(ar, ce_id, ce_state, attr); + if (ret) { + ath10k_err("Failed to initialize CE dest ring for ID: %d (%d)\n", + ce_id, ret); ath10k_ce_deinit(ce_state); return NULL; } -- cgit v0.10.2 From 0e1cbf9a6f85eb272bd6bc410db39b4e506d230f Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 13 Aug 2013 07:59:35 +0200 Subject: ath10k: fix HTT service setup The "disable credit flow" flag was set too late and it never was in the HTC service request message. This patch prevents firmware from reporting (useless) HTC credits for HTT service. HTT service doesn't use nor need credits. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index ef3329e..7d445d3 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -772,16 +772,16 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc, flags |= SM(tx_alloc, ATH10K_HTC_CONN_FLAGS_RECV_ALLOC); - req_msg = &msg->connect_service; - req_msg->flags = __cpu_to_le16(flags); - req_msg->service_id = __cpu_to_le16(conn_req->service_id); - /* Only enable credit flow control for WMI ctrl service */ if (conn_req->service_id != ATH10K_HTC_SVC_ID_WMI_CONTROL) { flags |= ATH10K_HTC_CONN_FLAGS_DISABLE_CREDIT_FLOW_CTRL; disable_credit_flow_ctrl = true; } + req_msg = &msg->connect_service; + req_msg->flags = __cpu_to_le16(flags); + req_msg->service_id = __cpu_to_le16(conn_req->service_id); + INIT_COMPLETION(htc->ctl_resp); status = ath10k_htc_send(htc, ATH10K_HTC_EP_0, skb); -- cgit v0.10.2 From dfa95b5024027400207ed6bf8914936f1b4efa88 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 13 Aug 2013 07:59:37 +0200 Subject: ath10k: implement 802.3 SNAP rx decap type A-MSDU handling This enables driver to rx another decapped a-msdu frames. It should possibly help with throughputs in some cases and reduce (or eliminate) number of messages like this: ath10k: error processing msdus -524 Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index e784c40..9bb0ae89 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -610,8 +610,7 @@ static int ath10k_htt_rx_amsdu(struct ath10k_htt *htt, RX_MPDU_START_INFO0_ENCRYPT_TYPE); /* FIXME: No idea what assumptions are safe here. Need logs */ - if ((fmt == RX_MSDU_DECAP_RAW && skb->next) || - (fmt == RX_MSDU_DECAP_8023_SNAP_LLC)) { + if ((fmt == RX_MSDU_DECAP_RAW && skb->next)) { ath10k_htt_rx_free_msdu_chain(skb->next); skb->next = NULL; return -ENOTSUPP; @@ -659,6 +658,15 @@ static int ath10k_htt_rx_amsdu(struct ath10k_htt *htt, decap_hdr += roundup(crypto_len, 4); } + /* When fmt == RX_MSDU_DECAP_8023_SNAP_LLC: + * + * SNAP 802.3 consists of: + * [dst:6][src:6][len:2][dsap:1][ssap:1][ctl:1][snap:5] + * [data][fcs:4]. + * + * Since this overlaps with A-MSDU header (da, sa, len) + * there's nothing extra to do. */ + if (fmt == RX_MSDU_DECAP_ETHERNET2_DIX) { /* Ethernet2 decap inserts ethernet header in place of * A-MSDU subframe header. */ -- cgit v0.10.2 From 7f8a62db4ba9d08d2bacf126b442d43ea47b22a8 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 13 Aug 2013 07:59:38 +0200 Subject: ath10k: plug possible memory leak in WMI There was a possible memory leak when WMI command queue reached it's limit. Command buffers were not freed. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 55f90c7..775fedf 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -110,6 +110,7 @@ static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, if (atomic_add_return(1, &ar->wmi.pending_tx_count) > WMI_MAX_PENDING_TX_COUNT) { /* avoid using up memory when FW hangs */ + dev_kfree_skb(skb); atomic_dec(&ar->wmi.pending_tx_count); return -EBUSY; } -- cgit v0.10.2 From 68c8a9b22eeec0b57ba261eec5b642ec1cc5fa16 Mon Sep 17 00:00:00 2001 From: Marek Puzyniak Date: Tue, 13 Aug 2013 11:45:22 +0200 Subject: ath10k: fix WEP in AP and IBSS mode WEP encoding was not working properly for AP and IBSS mode. TX frames were encrypted with default WEP tx key index set always to zero, what sometimes was wrong when different key index should be used. This patch allows to update WEP key index also for AP and IBSS mode. Problem detected during automated WEP tests. Signed-off-by: Marek Puzyniak Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 9637a949..7eab8a4 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1418,10 +1418,6 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb) struct ieee80211_key_conf *key = info->control.hw_key; int ret; - /* TODO AP mode should be implemented */ - if (vif->type != NL80211_IFTYPE_STATION) - return; - if (!ieee80211_has_protected(hdr->frame_control)) return; -- cgit v0.10.2 From 0d9b0438b616479e4decadf2cb7d39a5f4e5360f Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 9 Aug 2013 10:13:33 +0200 Subject: ath10k: add support for firmware newer than 636 The mgmt_rx event structure has been expanded. Since the structure header is expanded the payload (i.e. mgmt frame) is shifted by a few bytes. This needs to be taken into account in order to support both old and new firmware. This introduces a fw_features to keep track of any FW-related ABI/behaviour changes. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index e4bba56..ab05c4c 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -270,6 +270,14 @@ enum ath10k_state { ATH10K_STATE_WEDGED, }; +enum ath10k_fw_features { + /* wmi_mgmt_rx_hdr contains extra RSSI information */ + ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX = 0, + + /* keep last */ + ATH10K_FW_FEATURE_COUNT, +}; + struct ath10k { struct ath_common ath_common; struct ieee80211_hw *hw; @@ -288,6 +296,8 @@ struct ath10k { u32 vht_cap_info; u32 num_rf_chains; + DECLARE_BITMAP(fw_features, ATH10K_FW_FEATURE_COUNT); + struct targetdef *targetdef; struct hostdef *hostdef; diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 775fedf..32fd5e7 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -316,7 +316,9 @@ static inline u8 get_rate_idx(u32 rate, enum ieee80211_band band) static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb) { - struct wmi_mgmt_rx_event *event = (struct wmi_mgmt_rx_event *)skb->data; + struct wmi_mgmt_rx_event_v1 *ev_v1; + struct wmi_mgmt_rx_event_v2 *ev_v2; + struct wmi_mgmt_rx_hdr_v1 *ev_hdr; struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_hdr *hdr; u32 rx_status; @@ -326,13 +328,24 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb) u32 rate; u32 buf_len; u16 fc; + int pull_len; + + if (test_bit(ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX, ar->fw_features)) { + ev_v2 = (struct wmi_mgmt_rx_event_v2 *)skb->data; + ev_hdr = &ev_v2->hdr.v1; + pull_len = sizeof(*ev_v2); + } else { + ev_v1 = (struct wmi_mgmt_rx_event_v1 *)skb->data; + ev_hdr = &ev_v1->hdr; + pull_len = sizeof(*ev_v1); + } - channel = __le32_to_cpu(event->hdr.channel); - buf_len = __le32_to_cpu(event->hdr.buf_len); - rx_status = __le32_to_cpu(event->hdr.status); - snr = __le32_to_cpu(event->hdr.snr); - phy_mode = __le32_to_cpu(event->hdr.phy_mode); - rate = __le32_to_cpu(event->hdr.rate); + channel = __le32_to_cpu(ev_hdr->channel); + buf_len = __le32_to_cpu(ev_hdr->buf_len); + rx_status = __le32_to_cpu(ev_hdr->status); + snr = __le32_to_cpu(ev_hdr->snr); + phy_mode = __le32_to_cpu(ev_hdr->phy_mode); + rate = __le32_to_cpu(ev_hdr->rate); memset(status, 0, sizeof(*status)); @@ -359,7 +372,7 @@ static int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb) status->signal = snr + ATH10K_DEFAULT_NOISE_FLOOR; status->rate_idx = get_rate_idx(rate, status->band); - skb_pull(skb, sizeof(event->hdr)); + skb_pull(skb, pull_len); hdr = (struct ieee80211_hdr *)skb->data; fc = le16_to_cpu(hdr->frame_control); @@ -944,6 +957,9 @@ static void ath10k_wmi_service_ready_event_rx(struct ath10k *ar, ar->phy_capability = __le32_to_cpu(ev->phy_capability); ar->num_rf_chains = __le32_to_cpu(ev->num_rf_chains); + if (ar->fw_version_build > 636) + set_bit(ATH10K_FW_FEATURE_EXT_WMI_MGMT_RX, ar->fw_features); + if (ar->num_rf_chains > WMI_MAX_SPATIAL_STREAM) { ath10k_warn("hardware advertises support for more spatial streams than it should (%d > %d)\n", ar->num_rf_chains, WMI_MAX_SPATIAL_STREAM); diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 2c5a4f8..08860c4 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -1268,7 +1268,7 @@ struct wmi_scan_event { * good idea to pass all the fields in the RX status * descriptor up to the host. */ -struct wmi_mgmt_rx_hdr { +struct wmi_mgmt_rx_hdr_v1 { __le32 channel; __le32 snr; __le32 rate; @@ -1277,8 +1277,18 @@ struct wmi_mgmt_rx_hdr { __le32 status; /* %WMI_RX_STATUS_ */ } __packed; -struct wmi_mgmt_rx_event { - struct wmi_mgmt_rx_hdr hdr; +struct wmi_mgmt_rx_hdr_v2 { + struct wmi_mgmt_rx_hdr_v1 v1; + __le32 rssi_ctl[4]; +} __packed; + +struct wmi_mgmt_rx_event_v1 { + struct wmi_mgmt_rx_hdr_v1 hdr; + u8 buf[0]; +} __packed; + +struct wmi_mgmt_rx_event_v2 { + struct wmi_mgmt_rx_hdr_v2 hdr; u8 buf[0]; } __packed; -- cgit v0.10.2 From 961d4c38961a0f61e43edbb1fb579f28475a88bd Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 9 Aug 2013 10:13:34 +0200 Subject: ath10k: add support for HTT 3.0 New firmware comes with new HTT protocol version. In 3.0 the separate mgmt tx command has been removed. All traffic is to be pushed through data tx (tx_frm) command with a twist - FW seems to not be able (yet?) to access tx fragment table so for manamgement frames frame pointer is passed directly. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt.c b/drivers/net/wireless/ath/ath10k/htt.c index 39342c5..5f7eeeb 100644 --- a/drivers/net/wireless/ath/ath10k/htt.c +++ b/drivers/net/wireless/ath/ath10k/htt.c @@ -104,21 +104,16 @@ err_htc_attach: static int ath10k_htt_verify_version(struct ath10k_htt *htt) { - ath10k_dbg(ATH10K_DBG_HTT, - "htt target version %d.%d; host version %d.%d\n", - htt->target_version_major, - htt->target_version_minor, - HTT_CURRENT_VERSION_MAJOR, - HTT_CURRENT_VERSION_MINOR); - - if (htt->target_version_major != HTT_CURRENT_VERSION_MAJOR) { - ath10k_err("htt major versions are incompatible!\n"); + ath10k_info("htt target version %d.%d\n", + htt->target_version_major, htt->target_version_minor); + + if (htt->target_version_major != 2 && + htt->target_version_major != 3) { + ath10k_err("unsupported htt major version %d. supported versions are 2 and 3\n", + htt->target_version_major); return -ENOTSUPP; } - if (htt->target_version_minor != HTT_CURRENT_VERSION_MINOR) - ath10k_warn("htt minor version differ but still compatible\n"); - return 0; } diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h index 318be46..26c78a9 100644 --- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h @@ -23,9 +23,6 @@ #include "htc.h" #include "rx_desc.h" -#define HTT_CURRENT_VERSION_MAJOR 2 -#define HTT_CURRENT_VERSION_MINOR 1 - enum htt_dbg_stats_type { HTT_DBG_STATS_WAL_PDEV_TXRX = 1 << 0, HTT_DBG_STATS_RX_REORDER = 1 << 1, @@ -45,6 +42,9 @@ enum htt_h2t_msg_type { /* host-to-target */ HTT_H2T_MSG_TYPE_SYNC = 4, HTT_H2T_MSG_TYPE_AGGR_CFG = 5, HTT_H2T_MSG_TYPE_FRAG_DESC_BANK_CFG = 6, + + /* This command is used for sending management frames in HTT < 3.0. + * HTT >= 3.0 uses TX_FRM for everything. */ HTT_H2T_MSG_TYPE_MGMT_TX = 7, HTT_H2T_NUM_MSGS /* keep this last */ diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index 656c254..d4fb387 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -401,10 +401,16 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) goto err; } - txfrag = dev_alloc_skb(frag_len); - if (!txfrag) { - res = -ENOMEM; - goto err; + /* Since HTT 3.0 there is no separate mgmt tx command. However in case + * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx + * fragment list host driver specifies directly frame pointer. */ + if (htt->target_version_major < 3 || + !ieee80211_is_mgmt(hdr->frame_control)) { + txfrag = dev_alloc_skb(frag_len); + if (!txfrag) { + res = -ENOMEM; + goto err; + } } if (!IS_ALIGNED((unsigned long)txdesc->data, 4)) { @@ -427,23 +433,31 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) if (res) goto err; - /* tx fragment list must be terminated with zero-entry */ - skb_put(txfrag, frag_len); - tx_frags = (struct htt_data_tx_desc_frag *)txfrag->data; - tx_frags[0].paddr = __cpu_to_le32(ATH10K_SKB_CB(msdu)->paddr); - tx_frags[0].len = __cpu_to_le32(msdu->len); - tx_frags[1].paddr = __cpu_to_le32(0); - tx_frags[1].len = __cpu_to_le32(0); - - res = ath10k_skb_map(dev, txfrag); - if (res) - goto err; + /* Since HTT 3.0 there is no separate mgmt tx command. However in case + * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx + * fragment list host driver specifies directly frame pointer. */ + if (htt->target_version_major < 3 || + !ieee80211_is_mgmt(hdr->frame_control)) { + /* tx fragment list must be terminated with zero-entry */ + skb_put(txfrag, frag_len); + tx_frags = (struct htt_data_tx_desc_frag *)txfrag->data; + tx_frags[0].paddr = __cpu_to_le32(ATH10K_SKB_CB(msdu)->paddr); + tx_frags[0].len = __cpu_to_le32(msdu->len); + tx_frags[1].paddr = __cpu_to_le32(0); + tx_frags[1].len = __cpu_to_le32(0); + + res = ath10k_skb_map(dev, txfrag); + if (res) + goto err; + + ath10k_dbg(ATH10K_DBG_HTT, "txfrag 0x%llx\n", + (unsigned long long) ATH10K_SKB_CB(txfrag)->paddr); + ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "txfrag: ", + txfrag->data, frag_len); + } - ath10k_dbg(ATH10K_DBG_HTT, "txfrag 0x%llx msdu 0x%llx\n", - (unsigned long long) ATH10K_SKB_CB(txfrag)->paddr, + ath10k_dbg(ATH10K_DBG_HTT, "msdu 0x%llx\n", (unsigned long long) ATH10K_SKB_CB(msdu)->paddr); - ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "txfrag: ", - txfrag->data, frag_len); ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "msdu: ", msdu->data, msdu->len); @@ -459,8 +473,17 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) if (!ieee80211_has_protected(hdr->frame_control)) flags0 |= HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT; flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT; - flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI, - HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); + + /* Since HTT 3.0 there is no separate mgmt tx command. However in case + * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx + * fragment list host driver specifies directly frame pointer. */ + if (htt->target_version_major >= 3 && + ieee80211_is_mgmt(hdr->frame_control)) + flags0 |= SM(ATH10K_HW_TXRX_MGMT, + HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); + else + flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI, + HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); flags1 = 0; flags1 |= SM((u16)vdev_id, HTT_DATA_TX_DESC_FLAGS1_VDEV_ID); @@ -468,7 +491,14 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD; flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD; - frags_paddr = ATH10K_SKB_CB(txfrag)->paddr; + /* Since HTT 3.0 there is no separate mgmt tx command. However in case + * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx + * fragment list host driver specifies directly frame pointer. */ + if (htt->target_version_major >= 3 && + ieee80211_is_mgmt(hdr->frame_control)) + frags_paddr = ATH10K_SKB_CB(msdu)->paddr; + else + frags_paddr = ATH10K_SKB_CB(txfrag)->paddr; cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_TX_FRM; cmd->data_tx.flags0 = flags0; diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 9868705..5708888 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -45,6 +45,9 @@ enum ath10k_hw_txrx_mode { ATH10K_HW_TXRX_RAW = 0, ATH10K_HW_TXRX_NATIVE_WIFI = 1, ATH10K_HW_TXRX_ETHERNET = 2, + + /* Valid for HTT >= 3.0. Used for management frames in TX_FRM. */ + ATH10K_HW_TXRX_MGMT = 3, }; enum ath10k_mcast2ucast_mode { diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 7eab8a4..248248b 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1473,6 +1473,12 @@ static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb) struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; int ret; + if (ar->htt.target_version_major >= 3) { + /* Since HTT 3.0 there is no separate mgmt tx command */ + ret = ath10k_htt_tx(&ar->htt, skb); + goto exit; + } + if (ieee80211_is_mgmt(hdr->frame_control)) ret = ath10k_htt_mgmt_tx(&ar->htt, skb); else if (ieee80211_is_nullfunc(hdr->frame_control)) @@ -1484,6 +1490,7 @@ static void ath10k_tx_htt(struct ath10k *ar, struct sk_buff *skb) else ret = ath10k_htt_tx(&ar->htt, skb); +exit: if (ret) { ath10k_warn("tx failed (%d). dropping packet.\n", ret); ieee80211_free_txskb(ar->hw, skb); @@ -1720,8 +1727,10 @@ static void ath10k_tx(struct ieee80211_hw *hw, /* we must calculate tid before we apply qos workaround * as we'd lose the qos control field */ tid = HTT_DATA_TX_EXT_TID_NON_QOS_MCAST_BCAST; - if (ieee80211_is_data_qos(hdr->frame_control) && - is_unicast_ether_addr(ieee80211_get_DA(hdr))) { + if (ieee80211_is_mgmt(hdr->frame_control)) { + tid = HTT_DATA_TX_EXT_TID_MGMT; + } else if (ieee80211_is_data_qos(hdr->frame_control) && + is_unicast_ether_addr(ieee80211_get_DA(hdr))) { u8 *qc = ieee80211_get_qos_ctl(hdr); tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK; } -- cgit v0.10.2 From e2951f7ff8d6f94f1f3c2cab1f360de444b32ed8 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Wed, 21 Aug 2013 21:56:44 +0530 Subject: ath10k: Fix mutex unlock balance ath10k_debug_read_target_stats is properly protected by data_lock (spinlock). Remove the unwanted mutex_unlock(&ar->conf_mutex) [ BUG: bad unlock balance detected! ] ------------------------------------- kworker/u4:0/12459 is trying to release lock (&ar->conf_mutex) at: [] mutex_unlock+0xd/0x10 but there are no more locks to release! Call Trace: [] ? mutex_unlock+0xd/0x10 [] __lock_release+0x4d/0xe0 [] ? ath10k_debug_read_target_stats+0xac/0x290 [] ? mutex_unlock+0xd/0x10 [] lock_release+0x4b/0x150 [] __mutex_unlock_slowpath+0x70/0x150 [] ? ath10k_debug_read_target_stats+0xac/0x290 [] ? trace_hardirqs_on+0xb/0x10 [] mutex_unlock+0xd/0x10 [] ath10k_debug_read_target_stats+0xb7/0x290 [] ath10k_wmi_event_process+0x3fa/0x6e0 [] ? trace_hardirqs_on+0xb/0x10 [] ath10k_wmi_event_work+0x21/0x40 [ath10k_core] Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 3d65594..fcb40cc 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -260,7 +260,6 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, } spin_unlock_bh(&ar->data_lock); - mutex_unlock(&ar->conf_mutex); complete(&ar->debug.event_stats_compl); } -- cgit v0.10.2 From 39e4086a7365b933265839090b3468c9ecc52a42 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 27 Aug 2013 13:07:58 +0200 Subject: ath10k: use inline ce_state structure Simplifies memory managament of ce_state. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 1a702e1..c8b7d21 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -727,7 +727,7 @@ int ath10k_ce_completed_send_next(struct ce_state *ce_state, void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_state *ce_state = ar_pci->ce_id_to_state[ce_id]; + struct ce_state *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ce_state->ctrl_addr; void *transfer_context; u32 buf; @@ -846,7 +846,7 @@ void ath10k_ce_disable_interrupts(struct ath10k *ar) ath10k_pci_wake(ar); for (ce_id = 0; ce_id < ar_pci->ce_count; ce_id++) { - struct ce_state *ce_state = ar_pci->ce_id_to_state[ce_id]; + struct ce_state *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ce_state->ctrl_addr; ath10k_ce_copy_complete_intr_disable(ar, ctrl_addr); @@ -1081,27 +1081,17 @@ static struct ce_state *ath10k_ce_init_state(struct ath10k *ar, const struct ce_attr *attr) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_state *ce_state = NULL; + struct ce_state *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ath10k_ce_base_address(ce_id); spin_lock_bh(&ar_pci->ce_lock); - if (!ar_pci->ce_id_to_state[ce_id]) { - ce_state = kzalloc(sizeof(*ce_state), GFP_ATOMIC); - if (ce_state == NULL) { - spin_unlock_bh(&ar_pci->ce_lock); - return NULL; - } - - ar_pci->ce_id_to_state[ce_id] = ce_state; - ce_state->ar = ar; - ce_state->id = ce_id; - ce_state->ctrl_addr = ctrl_addr; - ce_state->state = CE_RUNNING; - /* Save attribute flags */ - ce_state->attr_flags = attr->flags; - ce_state->src_sz_max = attr->src_sz_max; - } + ce_state->ar = ar; + ce_state->id = ce_id; + ce_state->ctrl_addr = ctrl_addr; + ce_state->state = CE_RUNNING; + ce_state->attr_flags = attr->flags; + ce_state->src_sz_max = attr->src_sz_max; spin_unlock_bh(&ar_pci->ce_lock); @@ -1159,13 +1149,9 @@ struct ce_state *ath10k_ce_init(struct ath10k *ar, void ath10k_ce_deinit(struct ce_state *ce_state) { - unsigned int ce_id = ce_state->id; struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - ce_state->state = CE_UNUSED; - ar_pci->ce_id_to_state[ce_id] = NULL; - if (ce_state->src_ring) { kfree(ce_state->src_ring->shadow_base_unaligned); pci_free_consistent(ar_pci->pdev, @@ -1186,5 +1172,8 @@ void ath10k_ce_deinit(struct ce_state *ce_state) ce_state->dest_ring->base_addr_ce_space); kfree(ce_state->dest_ring); } - kfree(ce_state); + + ce_state->state = CE_UNUSED; + ce_state->src_ring = NULL; + ce_state->dest_ring = NULL; } diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 153ae28..13acaf0 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -233,7 +233,7 @@ struct ath10k_pci { spinlock_t ce_lock; /* Map CE id to ce_state */ - struct ce_state *ce_id_to_state[CE_COUNT_MAX]; + struct ce_state ce_states[CE_COUNT_MAX]; }; static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar) -- cgit v0.10.2 From 774c7e8c2b2f648ef51aa5896fa350b6300c3043 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 27 Aug 2013 13:07:59 +0200 Subject: ath10k: remove ce_op_state It was only written to and never read back. No use to keep it around. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index c8b7d21..c391f46 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -1089,7 +1089,6 @@ static struct ce_state *ath10k_ce_init_state(struct ath10k *ar, ce_state->ar = ar; ce_state->id = ce_id; ce_state->ctrl_addr = ctrl_addr; - ce_state->state = CE_RUNNING; ce_state->attr_flags = attr->flags; ce_state->src_sz_max = attr->src_sz_max; @@ -1173,7 +1172,6 @@ void ath10k_ce_deinit(struct ce_state *ce_state) kfree(ce_state->dest_ring); } - ce_state->state = CE_UNUSED; ce_state->src_ring = NULL; ce_state->dest_ring = NULL; } diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h index c17f07c..6f6bca0 100644 --- a/drivers/net/wireless/ath/ath10k/ce.h +++ b/drivers/net/wireless/ath/ath10k/ce.h @@ -39,13 +39,6 @@ struct ce_state; -/* Copy Engine operational state */ -enum ce_op_state { - CE_UNUSED, - CE_PAUSED, - CE_RUNNING, -}; - #define CE_DESC_FLAGS_GATHER (1 << 0) #define CE_DESC_FLAGS_BYTE_SWAP (1 << 1) #define CE_DESC_FLAGS_META_DATA_MASK 0xFFFC @@ -124,7 +117,6 @@ struct ce_state { unsigned int attr_flags; u32 ctrl_addr; - enum ce_op_state state; void (*send_cb) (struct ce_state *ce_state, void *per_transfer_send_context, -- cgit v0.10.2 From 6702bad4065f1993e0541c41ff474291d407b363 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 27 Aug 2013 13:08:00 +0200 Subject: ath10k: remove unused ce_attr parameters Some parameters were unused and are not required. They have no representation in firmware. Clean them up. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h index 6f6bca0..ce4cbbf 100644 --- a/drivers/net/wireless/ath/ath10k/ce.h +++ b/drivers/net/wireless/ath/ath10k/ce.h @@ -314,9 +314,6 @@ struct ce_attr { /* CE_ATTR_* values */ unsigned int flags; - /* currently not in use */ - unsigned int priority; - /* #entries in source ring - Must be a power of 2 */ unsigned int src_nentries; @@ -328,9 +325,6 @@ struct ce_attr { /* #entries in destination ring - Must be a power of 2 */ unsigned int dest_nentries; - - /* Future use */ - void *reserved; }; /* diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 996efdd..80cc7fd 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -59,23 +59,23 @@ static void ath10k_pci_stop_intr(struct ath10k *ar); static const struct ce_attr host_ce_config_wlan[] = { /* host->target HTC control and raw streams */ - { /* CE0 */ CE_ATTR_FLAGS, 0, 16, 256, 0, NULL,}, + { /* CE0 */ CE_ATTR_FLAGS, 16, 256, 0 }, /* could be moved to share CE3 */ /* target->host HTT + HTC control */ - { /* CE1 */ CE_ATTR_FLAGS, 0, 0, 512, 512, NULL,}, + { /* CE1 */ CE_ATTR_FLAGS, 0, 512, 512 }, /* target->host WMI */ - { /* CE2 */ CE_ATTR_FLAGS, 0, 0, 2048, 32, NULL,}, + { /* CE2 */ CE_ATTR_FLAGS, 0, 2048, 32 }, /* host->target WMI */ - { /* CE3 */ CE_ATTR_FLAGS, 0, 32, 2048, 0, NULL,}, + { /* CE3 */ CE_ATTR_FLAGS, 32, 2048, 0 }, /* host->target HTT */ - { /* CE4 */ CE_ATTR_FLAGS | CE_ATTR_DIS_INTR, 0, - CE_HTT_H2T_MSG_SRC_NENTRIES, 256, 0, NULL,}, + { /* CE4 */ CE_ATTR_FLAGS | CE_ATTR_DIS_INTR, + CE_HTT_H2T_MSG_SRC_NENTRIES, 256, 0 }, /* unused */ - { /* CE5 */ CE_ATTR_FLAGS, 0, 0, 0, 0, NULL,}, + { /* CE5 */ CE_ATTR_FLAGS, 0, 0, 0 }, /* Target autonomous hif_memcpy */ - { /* CE6 */ CE_ATTR_FLAGS, 0, 0, 0, 0, NULL,}, + { /* CE6 */ CE_ATTR_FLAGS, 0, 0, 0 }, /* ce_diag, the Diagnostic Window */ - { /* CE7 */ CE_ATTR_FLAGS, 0, 2, DIAG_TRANSFER_LIMIT, 2, NULL,}, + { /* CE7 */ CE_ATTR_FLAGS, 2, DIAG_TRANSFER_LIMIT, 2 }, }; /* Target firmware's Copy Engine configuration. */ -- cgit v0.10.2 From 87263e5bb4c6d772a44a93ec05b37812efb0f85f Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 27 Aug 2013 13:08:01 +0200 Subject: ath10k: rename hif_ce_pipe_info to ath10k_pci_pipe The new naming makes more sense. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 80cc7fd..b740960 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -48,9 +48,9 @@ static int ath10k_pci_diag_read_access(struct ath10k *ar, u32 address, static void ath10k_pci_process_ce(struct ath10k *ar); static int ath10k_pci_post_rx(struct ath10k *ar); -static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info, +static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info, int num); -static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info); +static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info); static void ath10k_pci_stop_ce(struct ath10k *ar); static void ath10k_pci_device_reset(struct ath10k *ar); static int ath10k_pci_reset_target(struct ath10k *ar); @@ -491,7 +491,7 @@ void ath10k_do_pci_sleep(struct ath10k *ar) * FIXME: Handle OOM properly. */ static inline -struct ath10k_pci_compl *get_free_compl(struct hif_ce_pipe_info *pipe_info) +struct ath10k_pci_compl *get_free_compl(struct ath10k_pci_pipe *pipe_info) { struct ath10k_pci_compl *compl = NULL; @@ -517,7 +517,7 @@ static void ath10k_pci_ce_send_done(struct ce_state *ce_state, { struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct hif_ce_pipe_info *pipe_info = &ar_pci->pipe_info[ce_state->id]; + struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id]; struct ath10k_pci_compl *compl; bool process = false; @@ -579,7 +579,7 @@ static void ath10k_pci_ce_recv_data(struct ce_state *ce_state, { struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct hif_ce_pipe_info *pipe_info = &ar_pci->pipe_info[ce_state->id]; + struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id]; struct ath10k_pci_compl *compl; struct sk_buff *skb; @@ -623,7 +623,7 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id, { struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(nbuf); struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct hif_ce_pipe_info *pipe_info = &(ar_pci->pipe_info[pipe_id]); + struct ath10k_pci_pipe *pipe_info = &(ar_pci->pipe_info[pipe_id]); struct ce_state *ce_hdl = pipe_info->ce_hdl; struct ce_sendlist sendlist; unsigned int len; @@ -668,7 +668,7 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id, static u16 ath10k_pci_hif_get_free_queue_number(struct ath10k *ar, u8 pipe) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct hif_ce_pipe_info *pipe_info = &(ar_pci->pipe_info[pipe]); + struct ath10k_pci_pipe *pipe_info = &(ar_pci->pipe_info[pipe]); int ret; spin_lock_bh(&pipe_info->pipe_lock); @@ -764,7 +764,7 @@ static int ath10k_pci_start_ce(struct ath10k *ar) struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ce_state *ce_diag = ar_pci->ce_diag; const struct ce_attr *attr; - struct hif_ce_pipe_info *pipe_info; + struct ath10k_pci_pipe *pipe_info; struct ath10k_pci_compl *compl; int i, pipe_num, completions, disable_interrupts; @@ -847,7 +847,7 @@ static void ath10k_pci_cleanup_ce(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ath10k_pci_compl *compl, *tmp; - struct hif_ce_pipe_info *pipe_info; + struct ath10k_pci_pipe *pipe_info; struct sk_buff *netbuf; int pipe_num; @@ -1044,7 +1044,7 @@ static void ath10k_pci_hif_get_default_pipe(struct ath10k *ar, &dl_is_polled); } -static int ath10k_pci_post_rx_pipe(struct hif_ce_pipe_info *pipe_info, +static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info, int num) { struct ath10k *ar = pipe_info->hif_ce_state; @@ -1104,7 +1104,7 @@ err: static int ath10k_pci_post_rx(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct hif_ce_pipe_info *pipe_info; + struct ath10k_pci_pipe *pipe_info; const struct ce_attr *attr; int pipe_num, ret = 0; @@ -1154,7 +1154,7 @@ static int ath10k_pci_hif_start(struct ath10k *ar) return 0; } -static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info) +static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) { struct ath10k *ar; struct ath10k_pci *ar_pci; @@ -1186,7 +1186,7 @@ static void ath10k_pci_rx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info) } } -static void ath10k_pci_tx_pipe_cleanup(struct hif_ce_pipe_info *pipe_info) +static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) { struct ath10k *ar; struct ath10k_pci *ar_pci; @@ -1239,7 +1239,7 @@ static void ath10k_pci_buffer_cleanup(struct ath10k *ar) int pipe_num; for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { - struct hif_ce_pipe_info *pipe_info; + struct ath10k_pci_pipe *pipe_info; pipe_info = &ar_pci->pipe_info[pipe_num]; ath10k_pci_rx_pipe_cleanup(pipe_info); @@ -1250,7 +1250,7 @@ static void ath10k_pci_buffer_cleanup(struct ath10k *ar) static void ath10k_pci_ce_deinit(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct hif_ce_pipe_info *pipe_info; + struct ath10k_pci_pipe *pipe_info; int pipe_num; for (pipe_num = 0; pipe_num < ar_pci->ce_count; pipe_num++) { @@ -1686,7 +1686,7 @@ static int ath10k_pci_init_config(struct ath10k *ar) static int ath10k_pci_ce_init(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct hif_ce_pipe_info *pipe_info; + struct ath10k_pci_pipe *pipe_info; const struct ce_attr *attr; int pipe_num; @@ -1902,7 +1902,7 @@ static const struct ath10k_hif_ops ath10k_pci_hif_ops = { static void ath10k_pci_ce_tasklet(unsigned long ptr) { - struct hif_ce_pipe_info *pipe = (struct hif_ce_pipe_info *)ptr; + struct ath10k_pci_pipe *pipe = (struct ath10k_pci_pipe *)ptr; struct ath10k_pci *ar_pci = pipe->ar_pci; ath10k_ce_per_engine_service(ar_pci->ar, pipe->pipe_num); diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 13acaf0..021172ca 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -53,7 +53,7 @@ struct ath10k_pci_compl { struct list_head list; enum ath10k_pci_compl_state state; struct ce_state *ce_state; - struct hif_ce_pipe_info *pipe_info; + struct ath10k_pci_pipe *pipe_info; void *transfer_context; unsigned int nbytes; unsigned int transfer_id; @@ -160,7 +160,7 @@ enum ath10k_pci_features { }; /* Per-pipe state. */ -struct hif_ce_pipe_info { +struct ath10k_pci_pipe { /* Handle of underlying Copy Engine */ struct ce_state *ce_hdl; @@ -219,7 +219,7 @@ struct ath10k_pci { bool compl_processing; - struct hif_ce_pipe_info pipe_info[CE_COUNT_MAX]; + struct ath10k_pci_pipe pipe_info[CE_COUNT_MAX]; struct ath10k_hif_cb msg_callbacks_current; -- cgit v0.10.2 From 2aa39115737be4e57d80a404490d79bd1981777f Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 27 Aug 2013 13:08:02 +0200 Subject: ath10k: rename ce_state to ath10k_ce_pipe The new naming makes more sense. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index c391f46..15679d9 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -256,7 +256,7 @@ static inline void ath10k_ce_engine_int_status_clear(struct ath10k *ar, * ath10k_ce_sendlist_send. * The caller takes responsibility for any needed locking. */ -static int ath10k_ce_send_nolock(struct ce_state *ce_state, +static int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state, void *per_transfer_context, u32 buffer, unsigned int nbytes, @@ -317,7 +317,7 @@ exit: return ret; } -int ath10k_ce_send(struct ce_state *ce_state, +int ath10k_ce_send(struct ath10k_ce_pipe *ce_state, void *per_transfer_context, u32 buffer, unsigned int nbytes, @@ -349,7 +349,7 @@ void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist, u32 buffer, sendlist->num_items++; } -int ath10k_ce_sendlist_send(struct ce_state *ce_state, +int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state, void *per_transfer_context, struct ce_sendlist *sendlist, unsigned int transfer_id) @@ -402,7 +402,7 @@ int ath10k_ce_sendlist_send(struct ce_state *ce_state, return ret; } -int ath10k_ce_recv_buf_enqueue(struct ce_state *ce_state, +int ath10k_ce_recv_buf_enqueue(struct ath10k_ce_pipe *ce_state, void *per_recv_context, u32 buffer) { @@ -450,7 +450,7 @@ int ath10k_ce_recv_buf_enqueue(struct ce_state *ce_state, * Guts of ath10k_ce_completed_recv_next. * The caller takes responsibility for any necessary locking. */ -static int ath10k_ce_completed_recv_next_nolock(struct ce_state *ce_state, +static int ath10k_ce_completed_recv_next_nolock(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, @@ -506,7 +506,7 @@ static int ath10k_ce_completed_recv_next_nolock(struct ce_state *ce_state, return 0; } -int ath10k_ce_completed_recv_next(struct ce_state *ce_state, +int ath10k_ce_completed_recv_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, @@ -527,7 +527,7 @@ int ath10k_ce_completed_recv_next(struct ce_state *ce_state, return ret; } -int ath10k_ce_revoke_recv_next(struct ce_state *ce_state, +int ath10k_ce_revoke_recv_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp) { @@ -583,7 +583,7 @@ int ath10k_ce_revoke_recv_next(struct ce_state *ce_state, * Guts of ath10k_ce_completed_send_next. * The caller takes responsibility for any necessary locking. */ -static int ath10k_ce_completed_send_next_nolock(struct ce_state *ce_state, +static int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, @@ -640,7 +640,7 @@ static int ath10k_ce_completed_send_next_nolock(struct ce_state *ce_state, } /* NB: Modeled after ath10k_ce_completed_send_next */ -int ath10k_ce_cancel_send_next(struct ce_state *ce_state, +int ath10k_ce_cancel_send_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, @@ -698,7 +698,7 @@ int ath10k_ce_cancel_send_next(struct ce_state *ce_state, return ret; } -int ath10k_ce_completed_send_next(struct ce_state *ce_state, +int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, @@ -727,7 +727,7 @@ int ath10k_ce_completed_send_next(struct ce_state *ce_state, void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_state *ce_state = &ar_pci->ce_states[ce_id]; + struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ce_state->ctrl_addr; void *transfer_context; u32 buf; @@ -820,7 +820,7 @@ void ath10k_ce_per_engine_service_any(struct ath10k *ar) * * Called with ce_lock held. */ -static void ath10k_ce_per_engine_handler_adjust(struct ce_state *ce_state, +static void ath10k_ce_per_engine_handler_adjust(struct ath10k_ce_pipe *ce_state, int disable_copy_compl_intr) { u32 ctrl_addr = ce_state->ctrl_addr; @@ -846,7 +846,7 @@ void ath10k_ce_disable_interrupts(struct ath10k *ar) ath10k_pci_wake(ar); for (ce_id = 0; ce_id < ar_pci->ce_count; ce_id++) { - struct ce_state *ce_state = &ar_pci->ce_states[ce_id]; + struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ce_state->ctrl_addr; ath10k_ce_copy_complete_intr_disable(ar, ctrl_addr); @@ -854,12 +854,12 @@ void ath10k_ce_disable_interrupts(struct ath10k *ar) ath10k_pci_sleep(ar); } -void ath10k_ce_send_cb_register(struct ce_state *ce_state, - void (*send_cb) (struct ce_state *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id), +void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state, + void (*send_cb)(struct ath10k_ce_pipe *ce_state, + void *transfer_context, + u32 buffer, + unsigned int nbytes, + unsigned int transfer_id), int disable_interrupts) { struct ath10k *ar = ce_state->ar; @@ -871,13 +871,13 @@ void ath10k_ce_send_cb_register(struct ce_state *ce_state, spin_unlock_bh(&ar_pci->ce_lock); } -void ath10k_ce_recv_cb_register(struct ce_state *ce_state, - void (*recv_cb) (struct ce_state *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id, - unsigned int flags)) +void ath10k_ce_recv_cb_register(struct ath10k_ce_pipe *ce_state, + void (*recv_cb)(struct ath10k_ce_pipe *ce_state, + void *transfer_context, + u32 buffer, + unsigned int nbytes, + unsigned int transfer_id, + unsigned int flags)) { struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); @@ -890,7 +890,7 @@ void ath10k_ce_recv_cb_register(struct ce_state *ce_state, static int ath10k_ce_init_src_ring(struct ath10k *ar, unsigned int ce_id, - struct ce_state *ce_state, + struct ath10k_ce_pipe *ce_state, const struct ce_attr *attr) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); @@ -993,7 +993,7 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, static int ath10k_ce_init_dest_ring(struct ath10k *ar, unsigned int ce_id, - struct ce_state *ce_state, + struct ath10k_ce_pipe *ce_state, const struct ce_attr *attr) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); @@ -1076,12 +1076,12 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, return 0; } -static struct ce_state *ath10k_ce_init_state(struct ath10k *ar, +static struct ath10k_ce_pipe *ath10k_ce_init_state(struct ath10k *ar, unsigned int ce_id, const struct ce_attr *attr) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_state *ce_state = &ar_pci->ce_states[ce_id]; + struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ath10k_ce_base_address(ce_id); spin_lock_bh(&ar_pci->ce_lock); @@ -1104,11 +1104,11 @@ static struct ce_state *ath10k_ce_init_state(struct ath10k *ar, * initialization. It may be that only one side or the other is * initialized by software/firmware. */ -struct ce_state *ath10k_ce_init(struct ath10k *ar, +struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar, unsigned int ce_id, const struct ce_attr *attr) { - struct ce_state *ce_state; + struct ath10k_ce_pipe *ce_state; u32 ctrl_addr = ath10k_ce_base_address(ce_id); int ret; @@ -1146,7 +1146,7 @@ struct ce_state *ath10k_ce_init(struct ath10k *ar, return ce_state; } -void ath10k_ce_deinit(struct ce_state *ce_state) +void ath10k_ce_deinit(struct ath10k_ce_pipe *ce_state) { struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h index ce4cbbf..ac850c0 100644 --- a/drivers/net/wireless/ath/ath10k/ce.h +++ b/drivers/net/wireless/ath/ath10k/ce.h @@ -36,7 +36,7 @@ * how to use copy engines. */ -struct ce_state; +struct ath10k_ce_pipe; #define CE_DESC_FLAGS_GATHER (1 << 0) @@ -109,8 +109,7 @@ struct ce_ring_state { void **per_transfer_context; }; -/* Copy Engine internal state */ -struct ce_state { +struct ath10k_ce_pipe { struct ath10k *ar; unsigned int id; @@ -118,12 +117,12 @@ struct ce_state { u32 ctrl_addr; - void (*send_cb) (struct ce_state *ce_state, + void (*send_cb) (struct ath10k_ce_pipe *ce_state, void *per_transfer_send_context, u32 buffer, unsigned int nbytes, unsigned int transfer_id); - void (*recv_cb) (struct ce_state *ce_state, + void (*recv_cb) (struct ath10k_ce_pipe *ce_state, void *per_transfer_recv_context, u32 buffer, unsigned int nbytes, @@ -174,7 +173,7 @@ struct ce_attr; * * Implementation note: pushes 1 buffer to Source ring */ -int ath10k_ce_send(struct ce_state *ce_state, +int ath10k_ce_send(struct ath10k_ce_pipe *ce_state, void *per_transfer_send_context, u32 buffer, unsigned int nbytes, @@ -182,12 +181,12 @@ int ath10k_ce_send(struct ce_state *ce_state, unsigned int transfer_id, unsigned int flags); -void ath10k_ce_send_cb_register(struct ce_state *ce_state, - void (*send_cb) (struct ce_state *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id), +void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state, + void (*send_cb)(struct ath10k_ce_pipe *ce_state, + void *transfer_context, + u32 buffer, + unsigned int nbytes, + unsigned int transfer_id), int disable_interrupts); /* Append a simple buffer (address/length) to a sendlist. */ @@ -207,7 +206,7 @@ void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist, * * Implemenation note: Pushes multiple buffers with Gather to Source ring. */ -int ath10k_ce_sendlist_send(struct ce_state *ce_state, +int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state, void *per_transfer_send_context, struct ce_sendlist *sendlist, /* 14 bits */ @@ -225,17 +224,17 @@ int ath10k_ce_sendlist_send(struct ce_state *ce_state, * * Implemenation note: Pushes a buffer to Dest ring. */ -int ath10k_ce_recv_buf_enqueue(struct ce_state *ce_state, +int ath10k_ce_recv_buf_enqueue(struct ath10k_ce_pipe *ce_state, void *per_transfer_recv_context, u32 buffer); -void ath10k_ce_recv_cb_register(struct ce_state *ce_state, - void (*recv_cb) (struct ce_state *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id, - unsigned int flags)); +void ath10k_ce_recv_cb_register(struct ath10k_ce_pipe *ce_state, + void (*recv_cb)(struct ath10k_ce_pipe *ce_state, + void *transfer_context, + u32 buffer, + unsigned int nbytes, + unsigned int transfer_id, + unsigned int flags)); /* recv flags */ /* Data is byte-swapped */ @@ -245,7 +244,7 @@ void ath10k_ce_recv_cb_register(struct ce_state *ce_state, * Supply data for the next completed unprocessed receive descriptor. * Pops buffer from Dest ring. */ -int ath10k_ce_completed_recv_next(struct ce_state *ce_state, +int ath10k_ce_completed_recv_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, @@ -255,7 +254,7 @@ int ath10k_ce_completed_recv_next(struct ce_state *ce_state, * Supply data for the next completed unprocessed send descriptor. * Pops 1 completed send buffer from Source ring. */ -int ath10k_ce_completed_send_next(struct ce_state *ce_state, +int ath10k_ce_completed_send_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, @@ -264,7 +263,7 @@ int ath10k_ce_completed_send_next(struct ce_state *ce_state, /*==================CE Engine Initialization=======================*/ /* Initialize an instance of a CE */ -struct ce_state *ath10k_ce_init(struct ath10k *ar, +struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar, unsigned int ce_id, const struct ce_attr *attr); @@ -274,7 +273,7 @@ struct ce_state *ath10k_ce_init(struct ath10k *ar, * receive buffers. Target DMA must be stopped before using * this API. */ -int ath10k_ce_revoke_recv_next(struct ce_state *ce_state, +int ath10k_ce_revoke_recv_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp); @@ -283,13 +282,13 @@ int ath10k_ce_revoke_recv_next(struct ce_state *ce_state, * pending sends. Target DMA must be stopped before using * this API. */ -int ath10k_ce_cancel_send_next(struct ce_state *ce_state, +int ath10k_ce_cancel_send_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp, unsigned int *nbytesp, unsigned int *transfer_idp); -void ath10k_ce_deinit(struct ce_state *ce_state); +void ath10k_ce_deinit(struct ath10k_ce_pipe *ce_state); /*==================CE Interrupt Handlers====================*/ void ath10k_ce_per_engine_service_any(struct ath10k *ar); diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index b740960..ee095bd 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -112,7 +112,7 @@ static int ath10k_pci_diag_read_mem(struct ath10k *ar, u32 address, void *data, unsigned int completed_nbytes, orig_nbytes, remaining_bytes; unsigned int id; unsigned int flags; - struct ce_state *ce_diag; + struct ath10k_ce_pipe *ce_diag; /* Host buffer address in CE space */ u32 ce_data; dma_addr_t ce_data_base = 0; @@ -276,7 +276,7 @@ static int ath10k_pci_diag_write_mem(struct ath10k *ar, u32 address, unsigned int completed_nbytes, orig_nbytes, remaining_bytes; unsigned int id; unsigned int flags; - struct ce_state *ce_diag; + struct ath10k_ce_pipe *ce_diag; void *data_buf = NULL; u32 ce_data; /* Host buffer address in CE space */ dma_addr_t ce_data_base = 0; @@ -509,7 +509,7 @@ exit: } /* Called by lower (CE) layer when a send to Target completes. */ -static void ath10k_pci_ce_send_done(struct ce_state *ce_state, +static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state, void *transfer_context, u32 ce_data, unsigned int nbytes, @@ -571,7 +571,7 @@ static void ath10k_pci_ce_send_done(struct ce_state *ce_state, } /* Called by lower (CE) layer when data is received from the Target. */ -static void ath10k_pci_ce_recv_data(struct ce_state *ce_state, +static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state, void *transfer_context, u32 ce_data, unsigned int nbytes, unsigned int transfer_id, @@ -624,7 +624,7 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id, struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(nbuf); struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ath10k_pci_pipe *pipe_info = &(ar_pci->pipe_info[pipe_id]); - struct ce_state *ce_hdl = pipe_info->ce_hdl; + struct ath10k_ce_pipe *ce_hdl = pipe_info->ce_hdl; struct ce_sendlist sendlist; unsigned int len; u32 flags = 0; @@ -762,7 +762,7 @@ static void ath10k_pci_hif_set_callbacks(struct ath10k *ar, static int ath10k_pci_start_ce(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_state *ce_diag = ar_pci->ce_diag; + struct ath10k_ce_pipe *ce_diag = ar_pci->ce_diag; const struct ce_attr *attr; struct ath10k_pci_pipe *pipe_info; struct ath10k_pci_compl *compl; @@ -1049,7 +1049,7 @@ static int ath10k_pci_post_rx_pipe(struct ath10k_pci_pipe *pipe_info, { struct ath10k *ar = pipe_info->hif_ce_state; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_state *ce_state = pipe_info->ce_hdl; + struct ath10k_ce_pipe *ce_state = pipe_info->ce_hdl; struct sk_buff *skb; dma_addr_t ce_data; int i, ret = 0; @@ -1158,7 +1158,7 @@ static void ath10k_pci_rx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) { struct ath10k *ar; struct ath10k_pci *ar_pci; - struct ce_state *ce_hdl; + struct ath10k_ce_pipe *ce_hdl; u32 buf_sz; struct sk_buff *netbuf; u32 ce_data; @@ -1190,7 +1190,7 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) { struct ath10k *ar; struct ath10k_pci *ar_pci; - struct ce_state *ce_hdl; + struct ath10k_ce_pipe *ce_hdl; struct sk_buff *netbuf; u32 ce_data; unsigned int nbytes; @@ -1300,8 +1300,10 @@ static int ath10k_pci_hif_exchange_bmi_msg(struct ath10k *ar, void *resp, u32 *resp_len) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_state *ce_tx = ar_pci->pipe_info[BMI_CE_NUM_TO_TARG].ce_hdl; - struct ce_state *ce_rx = ar_pci->pipe_info[BMI_CE_NUM_TO_HOST].ce_hdl; + struct ath10k_pci_pipe *pci_tx = &ar_pci->pipe_info[BMI_CE_NUM_TO_TARG]; + struct ath10k_pci_pipe *pci_rx = &ar_pci->pipe_info[BMI_CE_NUM_TO_HOST]; + struct ath10k_ce_pipe *ce_tx = pci_tx->ce_hdl; + struct ath10k_ce_pipe *ce_rx = pci_rx->ce_hdl; dma_addr_t req_paddr = 0; dma_addr_t resp_paddr = 0; struct bmi_xfer xfer = {}; @@ -1385,7 +1387,7 @@ err_dma: return ret; } -static void ath10k_pci_bmi_send_done(struct ce_state *ce_state, +static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state, void *transfer_context, u32 data, unsigned int nbytes, @@ -1399,7 +1401,7 @@ static void ath10k_pci_bmi_send_done(struct ce_state *ce_state, complete(&xfer->done); } -static void ath10k_pci_bmi_recv_data(struct ce_state *ce_state, +static void ath10k_pci_bmi_recv_data(struct ath10k_ce_pipe *ce_state, void *transfer_context, u32 data, unsigned int nbytes, diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 021172ca..2e64931 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -52,7 +52,7 @@ enum ath10k_pci_compl_state { struct ath10k_pci_compl { struct list_head list; enum ath10k_pci_compl_state state; - struct ce_state *ce_state; + struct ath10k_ce_pipe *ce_state; struct ath10k_pci_pipe *pipe_info; void *transfer_context; unsigned int nbytes; @@ -162,7 +162,7 @@ enum ath10k_pci_features { /* Per-pipe state. */ struct ath10k_pci_pipe { /* Handle of underlying Copy Engine */ - struct ce_state *ce_hdl; + struct ath10k_ce_pipe *ce_hdl; /* Our pipe number; facilitiates use of pipe_info ptrs. */ u8 pipe_num; @@ -227,13 +227,13 @@ struct ath10k_pci { u32 fw_indicator_address; /* Copy Engine used for Diagnostic Accesses */ - struct ce_state *ce_diag; + struct ath10k_ce_pipe *ce_diag; /* FIXME: document what this really protects */ spinlock_t ce_lock; /* Map CE id to ce_state */ - struct ce_state ce_states[CE_COUNT_MAX]; + struct ath10k_ce_pipe ce_states[CE_COUNT_MAX]; }; static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar) -- cgit v0.10.2 From d21fb959d140484beb755854e7bae2f2b3cd44cb Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 27 Aug 2013 13:08:03 +0200 Subject: ath10k: rename ce_ring_state to ath10k_ce_ring The new naming makes more sense. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 15679d9..dd80c24 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -264,7 +264,7 @@ static int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state, unsigned int flags) { struct ath10k *ar = ce_state->ar; - struct ce_ring_state *src_ring = ce_state->src_ring; + struct ath10k_ce_ring *src_ring = ce_state->src_ring; struct ce_desc *desc, *sdesc; unsigned int nentries_mask = src_ring->nentries_mask; unsigned int sw_index = src_ring->sw_index; @@ -354,7 +354,7 @@ int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state, struct ce_sendlist *sendlist, unsigned int transfer_id) { - struct ce_ring_state *src_ring = ce_state->src_ring; + struct ath10k_ce_ring *src_ring = ce_state->src_ring; struct ce_sendlist_item *item; struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); @@ -406,7 +406,7 @@ int ath10k_ce_recv_buf_enqueue(struct ath10k_ce_pipe *ce_state, void *per_recv_context, u32 buffer) { - struct ce_ring_state *dest_ring = ce_state->dest_ring; + struct ath10k_ce_ring *dest_ring = ce_state->dest_ring; u32 ctrl_addr = ce_state->ctrl_addr; struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); @@ -457,7 +457,7 @@ static int ath10k_ce_completed_recv_next_nolock(struct ath10k_ce_pipe *ce_state, unsigned int *transfer_idp, unsigned int *flagsp) { - struct ce_ring_state *dest_ring = ce_state->dest_ring; + struct ath10k_ce_ring *dest_ring = ce_state->dest_ring; unsigned int nentries_mask = dest_ring->nentries_mask; unsigned int sw_index = dest_ring->sw_index; @@ -531,7 +531,7 @@ int ath10k_ce_revoke_recv_next(struct ath10k_ce_pipe *ce_state, void **per_transfer_contextp, u32 *bufferp) { - struct ce_ring_state *dest_ring; + struct ath10k_ce_ring *dest_ring; unsigned int nentries_mask; unsigned int sw_index; unsigned int write_index; @@ -589,7 +589,7 @@ static int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state, unsigned int *nbytesp, unsigned int *transfer_idp) { - struct ce_ring_state *src_ring = ce_state->src_ring; + struct ath10k_ce_ring *src_ring = ce_state->src_ring; u32 ctrl_addr = ce_state->ctrl_addr; struct ath10k *ar = ce_state->ar; unsigned int nentries_mask = src_ring->nentries_mask; @@ -646,7 +646,7 @@ int ath10k_ce_cancel_send_next(struct ath10k_ce_pipe *ce_state, unsigned int *nbytesp, unsigned int *transfer_idp) { - struct ce_ring_state *src_ring; + struct ath10k_ce_ring *src_ring; unsigned int nentries_mask; unsigned int sw_index; unsigned int write_index; @@ -894,7 +894,7 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, const struct ce_attr *attr) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_ring_state *src_ring; + struct ath10k_ce_ring *src_ring; unsigned int nentries = attr->src_nentries; unsigned int ce_nbytes; u32 ctrl_addr = ath10k_ce_base_address(ce_id); @@ -908,15 +908,15 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, return 0; } - ce_nbytes = sizeof(struct ce_ring_state) + (nentries * sizeof(void *)); + ce_nbytes = sizeof(struct ath10k_ce_ring) + (nentries * sizeof(void *)); ptr = kzalloc(ce_nbytes, GFP_KERNEL); if (ptr == NULL) return -ENOMEM; - ce_state->src_ring = (struct ce_ring_state *)ptr; + ce_state->src_ring = (struct ath10k_ce_ring *)ptr; src_ring = ce_state->src_ring; - ptr += sizeof(struct ce_ring_state); + ptr += sizeof(struct ath10k_ce_ring); src_ring->nentries = nentries; src_ring->nentries_mask = nentries - 1; @@ -997,7 +997,7 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, const struct ce_attr *attr) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - struct ce_ring_state *dest_ring; + struct ath10k_ce_ring *dest_ring; unsigned int nentries = attr->dest_nentries; unsigned int ce_nbytes; u32 ctrl_addr = ath10k_ce_base_address(ce_id); @@ -1011,15 +1011,15 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, return 0; } - ce_nbytes = sizeof(struct ce_ring_state) + (nentries * sizeof(void *)); + ce_nbytes = sizeof(struct ath10k_ce_ring) + (nentries * sizeof(void *)); ptr = kzalloc(ce_nbytes, GFP_KERNEL); if (ptr == NULL) return -ENOMEM; - ce_state->dest_ring = (struct ce_ring_state *)ptr; + ce_state->dest_ring = (struct ath10k_ce_ring *)ptr; dest_ring = ce_state->dest_ring; - ptr += sizeof(struct ce_ring_state); + ptr += sizeof(struct ath10k_ce_ring); dest_ring->nentries = nentries; dest_ring->nentries_mask = nentries - 1; diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h index ac850c0..cfef7d0 100644 --- a/drivers/net/wireless/ath/ath10k/ce.h +++ b/drivers/net/wireless/ath/ath10k/ce.h @@ -50,8 +50,7 @@ struct ce_desc { __le16 flags; /* %CE_DESC_FLAGS_ */ }; -/* Copy Engine Ring internal state */ -struct ce_ring_state { +struct ath10k_ce_ring { /* Number of entries in this ring; must be power of 2 */ unsigned int nentries; unsigned int nentries_mask; @@ -130,8 +129,8 @@ struct ath10k_ce_pipe { unsigned int flags); unsigned int src_sz_max; - struct ce_ring_state *src_ring; - struct ce_ring_state *dest_ring; + struct ath10k_ce_ring *src_ring; + struct ath10k_ce_ring *dest_ring; }; struct ce_sendlist_item { -- cgit v0.10.2 From a18b5ed8d2da1ccf572c5728b2de78bc86aef1c7 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Fri, 2 Aug 2013 10:56:01 +0300 Subject: ath10k: remove un ar_pci->cacheline_sz field cacheline_sz is not used anywhere and can be removed. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index ee095bd..551fe8c 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2394,8 +2394,6 @@ static int ath10k_pci_probe(struct pci_dev *pdev, spin_lock_init(&ar_pci->ce_lock); - ar_pci->cacheline_sz = dma_get_cache_alignment(); - ret = ath10k_core_register(ar); if (ret) { ath10k_err("could not register driver core (%d)\n", ret); diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 2e64931..50f3e7b 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -190,7 +190,6 @@ struct ath10k_pci { struct device *dev; struct ath10k *ar; void __iomem *mem; - int cacheline_sz; DECLARE_BITMAP(features, ATH10K_PCI_FEATURE_COUNT); -- cgit v0.10.2 From 48e9c225abf362c520d07621eff189c7ddb1a9da Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 10:01:32 +0300 Subject: ath10k: pci: make host_ce_config_wlan[] more readable It's much more readable if struct entries in host_ce_config_wlan are explicitly set. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 551fe8c..b1709d7 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -58,24 +58,69 @@ static int ath10k_pci_start_intr(struct ath10k *ar); static void ath10k_pci_stop_intr(struct ath10k *ar); static const struct ce_attr host_ce_config_wlan[] = { - /* host->target HTC control and raw streams */ - { /* CE0 */ CE_ATTR_FLAGS, 16, 256, 0 }, - /* could be moved to share CE3 */ - /* target->host HTT + HTC control */ - { /* CE1 */ CE_ATTR_FLAGS, 0, 512, 512 }, - /* target->host WMI */ - { /* CE2 */ CE_ATTR_FLAGS, 0, 2048, 32 }, - /* host->target WMI */ - { /* CE3 */ CE_ATTR_FLAGS, 32, 2048, 0 }, - /* host->target HTT */ - { /* CE4 */ CE_ATTR_FLAGS | CE_ATTR_DIS_INTR, - CE_HTT_H2T_MSG_SRC_NENTRIES, 256, 0 }, - /* unused */ - { /* CE5 */ CE_ATTR_FLAGS, 0, 0, 0 }, - /* Target autonomous hif_memcpy */ - { /* CE6 */ CE_ATTR_FLAGS, 0, 0, 0 }, - /* ce_diag, the Diagnostic Window */ - { /* CE7 */ CE_ATTR_FLAGS, 2, DIAG_TRANSFER_LIMIT, 2 }, + /* CE0: host->target HTC control and raw streams */ + { + .flags = CE_ATTR_FLAGS, + .src_nentries = 16, + .src_sz_max = 256, + .dest_nentries = 0, + }, + + /* CE1: target->host HTT + HTC control */ + { + .flags = CE_ATTR_FLAGS, + .src_nentries = 0, + .src_sz_max = 512, + .dest_nentries = 512, + }, + + /* CE2: target->host WMI */ + { + .flags = CE_ATTR_FLAGS, + .src_nentries = 0, + .src_sz_max = 2048, + .dest_nentries = 32, + }, + + /* CE3: host->target WMI */ + { + .flags = CE_ATTR_FLAGS, + .src_nentries = 32, + .src_sz_max = 2048, + .dest_nentries = 0, + }, + + /* CE4: host->target HTT */ + { + .flags = CE_ATTR_FLAGS | CE_ATTR_DIS_INTR, + .src_nentries = CE_HTT_H2T_MSG_SRC_NENTRIES, + .src_sz_max = 256, + .dest_nentries = 0, + }, + + /* CE5: unused */ + { + .flags = CE_ATTR_FLAGS, + .src_nentries = 0, + .src_sz_max = 0, + .dest_nentries = 0, + }, + + /* CE6: target autonomous hif_memcpy */ + { + .flags = CE_ATTR_FLAGS, + .src_nentries = 0, + .src_sz_max = 0, + .dest_nentries = 0, + }, + + /* CE7: ce_diag, the Diagnostic Window */ + { + .flags = CE_ATTR_FLAGS, + .src_nentries = 2, + .src_sz_max = DIAG_TRANSFER_LIMIT, + .dest_nentries = 2, + }, }; /* Target firmware's Copy Engine configuration. */ -- cgit v0.10.2 From d88effbaa6878eaf48ad5da453d3159c500da563 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 10:01:39 +0300 Subject: ath10k: make target_ce_config_wlan more readable It's easier to read t if the field names are visible. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index b1709d7..362814a 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -125,21 +125,78 @@ static const struct ce_attr host_ce_config_wlan[] = { /* Target firmware's Copy Engine configuration. */ static const struct ce_pipe_config target_ce_config_wlan[] = { - /* host->target HTC control and raw streams */ - { /* CE0 */ 0, PIPEDIR_OUT, 32, 256, CE_ATTR_FLAGS, 0,}, - /* target->host HTT + HTC control */ - { /* CE1 */ 1, PIPEDIR_IN, 32, 512, CE_ATTR_FLAGS, 0,}, - /* target->host WMI */ - { /* CE2 */ 2, PIPEDIR_IN, 32, 2048, CE_ATTR_FLAGS, 0,}, - /* host->target WMI */ - { /* CE3 */ 3, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,}, - /* host->target HTT */ - { /* CE4 */ 4, PIPEDIR_OUT, 256, 256, CE_ATTR_FLAGS, 0,}, + /* CE0: host->target HTC control and raw streams */ + { + .pipenum = 0, + .pipedir = PIPEDIR_OUT, + .nentries = 32, + .nbytes_max = 256, + .flags = CE_ATTR_FLAGS, + .reserved = 0, + }, + + /* CE1: target->host HTT + HTC control */ + { + .pipenum = 1, + .pipedir = PIPEDIR_IN, + .nentries = 32, + .nbytes_max = 512, + .flags = CE_ATTR_FLAGS, + .reserved = 0, + }, + + /* CE2: target->host WMI */ + { + .pipenum = 2, + .pipedir = PIPEDIR_IN, + .nentries = 32, + .nbytes_max = 2048, + .flags = CE_ATTR_FLAGS, + .reserved = 0, + }, + + /* CE3: host->target WMI */ + { + .pipenum = 3, + .pipedir = PIPEDIR_OUT, + .nentries = 32, + .nbytes_max = 2048, + .flags = CE_ATTR_FLAGS, + .reserved = 0, + }, + + /* CE4: host->target HTT */ + { + .pipenum = 4, + .pipedir = PIPEDIR_OUT, + .nentries = 256, + .nbytes_max = 256, + .flags = CE_ATTR_FLAGS, + .reserved = 0, + }, + /* NB: 50% of src nentries, since tx has 2 frags */ - /* unused */ - { /* CE5 */ 5, PIPEDIR_OUT, 32, 2048, CE_ATTR_FLAGS, 0,}, - /* Reserved for target autonomous hif_memcpy */ - { /* CE6 */ 6, PIPEDIR_INOUT, 32, 4096, CE_ATTR_FLAGS, 0,}, + + /* CE5: unused */ + { + .pipenum = 5, + .pipedir = PIPEDIR_OUT, + .nentries = 32, + .nbytes_max = 2048, + .flags = CE_ATTR_FLAGS, + .reserved = 0, + }, + + /* CE6: Reserved for target autonomous hif_memcpy */ + { + .pipenum = 6, + .pipedir = PIPEDIR_INOUT, + .nentries = 32, + .nbytes_max = 4096, + .flags = CE_ATTR_FLAGS, + .reserved = 0, + }, + /* CE7 used only by Host */ }; -- cgit v0.10.2 From aa5c1db4451596be424f8df511aa5435a7d51e6c Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 10:01:46 +0300 Subject: ath10k: remove void pointer from struct ath10k_pci_compl Void pointers are bad, mmkay. No functional changes. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 362814a..418de1e 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -643,7 +643,7 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state, compl->state = ATH10K_PCI_COMPL_SEND; compl->ce_state = ce_state; compl->pipe_info = pipe_info; - compl->transfer_context = transfer_context; + compl->skb = transfer_context; compl->nbytes = nbytes; compl->transfer_id = transfer_id; compl->flags = 0; @@ -693,7 +693,7 @@ static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state, compl->state = ATH10K_PCI_COMPL_RECV; compl->ce_state = ce_state; compl->pipe_info = pipe_info; - compl->transfer_context = transfer_context; + compl->skb = transfer_context; compl->nbytes = nbytes; compl->transfer_id = transfer_id; compl->flags = flags; @@ -939,7 +939,7 @@ static void ath10k_pci_stop_ce(struct ath10k *ar) * their associated resources */ spin_lock_bh(&ar_pci->compl_lock); list_for_each_entry(compl, &ar_pci->compl_process, list) { - skb = (struct sk_buff *)compl->transfer_context; + skb = compl->skb; ATH10K_SKB_CB(skb)->is_aborted = true; } spin_unlock_bh(&ar_pci->compl_lock); @@ -960,7 +960,7 @@ static void ath10k_pci_cleanup_ce(struct ath10k *ar) list_for_each_entry_safe(compl, tmp, &ar_pci->compl_process, list) { list_del(&compl->list); - netbuf = (struct sk_buff *)compl->transfer_context; + netbuf = compl->skb; dev_kfree_skb_any(netbuf); kfree(compl); } @@ -1014,7 +1014,7 @@ static void ath10k_pci_process_ce(struct ath10k *ar) switch (compl->state) { case ATH10K_PCI_COMPL_SEND: cb->tx_completion(ar, - compl->transfer_context, + compl->skb, compl->transfer_id); send_done = 1; break; @@ -1026,7 +1026,7 @@ static void ath10k_pci_process_ce(struct ath10k *ar) break; } - skb = (struct sk_buff *)compl->transfer_context; + skb = compl->skb; nbytes = compl->nbytes; ath10k_dbg(ATH10K_DBG_PCI, diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 50f3e7b..2a6cb09 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -54,7 +54,7 @@ struct ath10k_pci_compl { enum ath10k_pci_compl_state state; struct ath10k_ce_pipe *ce_state; struct ath10k_pci_pipe *pipe_info; - void *transfer_context; + struct sk_buff *skb; unsigned int nbytes; unsigned int transfer_id; unsigned int flags; -- cgit v0.10.2 From e479ed437bb876c6f16e80a492223da2f449f221 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 10:01:53 +0300 Subject: ath10k: convert ath10k_pci_reg_read/write32() to take struct ath10k This is consistent with all other functions. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 418de1e..e0cf75f 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2323,18 +2323,13 @@ static int ath10k_pci_reset_target(struct ath10k *ar) static void ath10k_pci_device_reset(struct ath10k *ar) { - struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - void __iomem *mem = ar_pci->mem; int i; u32 val; if (!SOC_GLOBAL_RESET_ADDRESS) return; - if (!mem) - return; - - ath10k_pci_reg_write32(mem, PCIE_SOC_WAKE_ADDRESS, + ath10k_pci_reg_write32(ar, PCIE_SOC_WAKE_ADDRESS, PCIE_SOC_WAKE_V_MASK); for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { if (ath10k_pci_target_is_awake(ar)) @@ -2343,12 +2338,12 @@ static void ath10k_pci_device_reset(struct ath10k *ar) } /* Put Target, including PCIe, into RESET. */ - val = ath10k_pci_reg_read32(mem, SOC_GLOBAL_RESET_ADDRESS); + val = ath10k_pci_reg_read32(ar, SOC_GLOBAL_RESET_ADDRESS); val |= 1; - ath10k_pci_reg_write32(mem, SOC_GLOBAL_RESET_ADDRESS, val); + ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val); for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { - if (ath10k_pci_reg_read32(mem, RTC_STATE_ADDRESS) & + if (ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) & RTC_STATE_COLD_RESET_MASK) break; msleep(1); @@ -2356,16 +2351,16 @@ static void ath10k_pci_device_reset(struct ath10k *ar) /* Pull Target, including PCIe, out of RESET. */ val &= ~1; - ath10k_pci_reg_write32(mem, SOC_GLOBAL_RESET_ADDRESS, val); + ath10k_pci_reg_write32(ar, SOC_GLOBAL_RESET_ADDRESS, val); for (i = 0; i < ATH_PCI_RESET_WAIT_MAX; i++) { - if (!(ath10k_pci_reg_read32(mem, RTC_STATE_ADDRESS) & + if (!(ath10k_pci_reg_read32(ar, RTC_STATE_ADDRESS) & RTC_STATE_COLD_RESET_MASK)) break; msleep(1); } - ath10k_pci_reg_write32(mem, PCIE_SOC_WAKE_ADDRESS, PCIE_SOC_WAKE_RESET); + ath10k_pci_reg_write32(ar, PCIE_SOC_WAKE_ADDRESS, PCIE_SOC_WAKE_RESET); } static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci) diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 2a6cb09..395f610 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -240,14 +240,18 @@ static inline struct ath10k_pci *ath10k_pci_priv(struct ath10k *ar) return ar->hif.priv; } -static inline u32 ath10k_pci_reg_read32(void __iomem *mem, u32 addr) +static inline u32 ath10k_pci_reg_read32(struct ath10k *ar, u32 addr) { - return ioread32(mem + PCIE_LOCAL_BASE_ADDRESS + addr); + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + + return ioread32(ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS + addr); } -static inline void ath10k_pci_reg_write32(void __iomem *mem, u32 addr, u32 val) +static inline void ath10k_pci_reg_write32(struct ath10k *ar, u32 addr, u32 val) { - iowrite32(val, mem + PCIE_LOCAL_BASE_ADDRESS + addr); + struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); + + iowrite32(val, ar_pci->mem + PCIE_LOCAL_BASE_ADDRESS + addr); } #define ATH_PCI_RESET_WAIT_MAX 10 /* ms */ -- cgit v0.10.2 From a40d3e420d50156b7a43e66d5f5b40c444ebc5da Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 10:02:00 +0300 Subject: ath10k: clean up ath10k_ce_completed_send_next_nolock() The error handling was just weird, simplify it. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index dd80c24..6a80142 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -594,8 +594,8 @@ static int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state, struct ath10k *ar = ce_state->ar; unsigned int nentries_mask = src_ring->nentries_mask; unsigned int sw_index = src_ring->sw_index; + struct ce_desc *sdesc, *sbase; unsigned int read_index; - int ret = -EIO; if (src_ring->hw_index == sw_index) { /* @@ -611,32 +611,33 @@ static int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state, src_ring->hw_index &= nentries_mask; ath10k_pci_sleep(ar); } + read_index = src_ring->hw_index; - if ((read_index != sw_index) && (read_index != 0xffffffff)) { - struct ce_desc *sbase = src_ring->shadow_base; - struct ce_desc *sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index); + if ((read_index == sw_index) || (read_index == 0xffffffff)) + return -EIO; - /* Return data from completed source descriptor */ - *bufferp = __le32_to_cpu(sdesc->addr); - *nbytesp = __le16_to_cpu(sdesc->nbytes); - *transfer_idp = MS(__le16_to_cpu(sdesc->flags), - CE_DESC_FLAGS_META_DATA); + sbase = src_ring->shadow_base; + sdesc = CE_SRC_RING_TO_DESC(sbase, sw_index); - if (per_transfer_contextp) - *per_transfer_contextp = - src_ring->per_transfer_context[sw_index]; + /* Return data from completed source descriptor */ + *bufferp = __le32_to_cpu(sdesc->addr); + *nbytesp = __le16_to_cpu(sdesc->nbytes); + *transfer_idp = MS(__le16_to_cpu(sdesc->flags), + CE_DESC_FLAGS_META_DATA); - /* sanity */ - src_ring->per_transfer_context[sw_index] = NULL; + if (per_transfer_contextp) + *per_transfer_contextp = + src_ring->per_transfer_context[sw_index]; - /* Update sw_index */ - sw_index = CE_RING_IDX_INCR(nentries_mask, sw_index); - src_ring->sw_index = sw_index; - ret = 0; - } + /* sanity */ + src_ring->per_transfer_context[sw_index] = NULL; - return ret; + /* Update sw_index */ + sw_index = CE_RING_IDX_INCR(nentries_mask, sw_index); + src_ring->sw_index = sw_index; + + return 0; } /* NB: Modeled after ath10k_ce_completed_send_next */ -- cgit v0.10.2 From 3aebe54b1c2158bd20c361501de7785c51c65dbe Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 10:02:07 +0300 Subject: ath10k: convert ath10k_pci_wake() to return We should not try to access hw if wakeup fails so add proper error checking for that. Also add the timeout lenght to the warning message. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 6a80142..19f23a2 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -277,7 +277,9 @@ static int ath10k_ce_send_nolock(struct ath10k_ce_pipe *ce_state, ath10k_warn("%s: send more we can (nbytes: %d, max: %d)\n", __func__, nbytes, ce_state->src_sz_max); - ath10k_pci_wake(ar); + ret = ath10k_pci_wake(ar); + if (ret) + return ret; if (unlikely(CE_RING_DELTA(nentries_mask, write_index, sw_index - 1) <= 0)) { @@ -419,7 +421,9 @@ int ath10k_ce_recv_buf_enqueue(struct ath10k_ce_pipe *ce_state, write_index = dest_ring->write_index; sw_index = dest_ring->sw_index; - ath10k_pci_wake(ar); + ret = ath10k_pci_wake(ar); + if (ret) + goto out; if (CE_RING_DELTA(nentries_mask, write_index, sw_index - 1) > 0) { struct ce_desc *base = dest_ring->base_addr_owner_space; @@ -441,6 +445,8 @@ int ath10k_ce_recv_buf_enqueue(struct ath10k_ce_pipe *ce_state, ret = -EIO; } ath10k_pci_sleep(ar); + +out: spin_unlock_bh(&ar_pci->ce_lock); return ret; @@ -596,6 +602,7 @@ static int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state, unsigned int sw_index = src_ring->sw_index; struct ce_desc *sdesc, *sbase; unsigned int read_index; + int ret; if (src_ring->hw_index == sw_index) { /* @@ -605,10 +612,15 @@ static int ath10k_ce_completed_send_next_nolock(struct ath10k_ce_pipe *ce_state, * the SW has really caught up to the HW, or if the cached * value of the HW index has become stale. */ - ath10k_pci_wake(ar); + + ret = ath10k_pci_wake(ar); + if (ret) + return ret; + src_ring->hw_index = ath10k_ce_src_ring_read_index_get(ar, ctrl_addr); src_ring->hw_index &= nentries_mask; + ath10k_pci_sleep(ar); } @@ -735,8 +747,12 @@ void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id) unsigned int nbytes; unsigned int id; unsigned int flags; + int ret; + + ret = ath10k_pci_wake(ar); + if (ret) + return; - ath10k_pci_wake(ar); spin_lock_bh(&ar_pci->ce_lock); /* Clear the copy-complete interrupts that will be handled here. */ @@ -795,10 +811,13 @@ void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id) void ath10k_ce_per_engine_service_any(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - int ce_id; + int ce_id, ret; u32 intr_summary; - ath10k_pci_wake(ar); + ret = ath10k_pci_wake(ar); + if (ret) + return; + intr_summary = CE_INTERRUPT_SUMMARY(ar); for (ce_id = 0; intr_summary && (ce_id < ar_pci->ce_count); ce_id++) { @@ -826,8 +845,11 @@ static void ath10k_ce_per_engine_handler_adjust(struct ath10k_ce_pipe *ce_state, { u32 ctrl_addr = ce_state->ctrl_addr; struct ath10k *ar = ce_state->ar; + int ret; - ath10k_pci_wake(ar); + ret = ath10k_pci_wake(ar); + if (ret) + return; if ((!disable_copy_compl_intr) && (ce_state->send_cb || ce_state->recv_cb)) @@ -843,9 +865,12 @@ static void ath10k_ce_per_engine_handler_adjust(struct ath10k_ce_pipe *ce_state, void ath10k_ce_disable_interrupts(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); - int ce_id; + int ce_id, ret; + + ret = ath10k_pci_wake(ar); + if (ret) + return; - ath10k_pci_wake(ar); for (ce_id = 0; ce_id < ar_pci->ce_count; ce_id++) { struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ce_state->ctrl_addr; diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index e0cf75f..29ccd04 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -537,7 +537,7 @@ static void ath10k_pci_wait(struct ath10k *ar) ath10k_warn("Unable to wakeup target\n"); } -void ath10k_do_pci_wake(struct ath10k *ar) +int ath10k_do_pci_wake(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); void __iomem *pci_addr = ar_pci->mem; @@ -553,18 +553,19 @@ void ath10k_do_pci_wake(struct ath10k *ar) atomic_inc(&ar_pci->keep_awake_count); if (ar_pci->verified_awake) - return; + return 0; for (;;) { if (ath10k_pci_target_is_awake(ar)) { ar_pci->verified_awake = true; - break; + return 0; } if (tot_delay > PCIE_WAKE_TIMEOUT) { - ath10k_warn("target takes too long to wake up (awake count %d)\n", + ath10k_warn("target took longer %d us to wake up (awake count %d)\n", + PCIE_WAKE_TIMEOUT, atomic_read(&ar_pci->keep_awake_count)); - break; + return -ETIMEDOUT; } udelay(curr_delay); diff --git a/drivers/net/wireless/ath/ath10k/pci.h b/drivers/net/wireless/ath/ath10k/pci.h index 395f610..7c49f6f 100644 --- a/drivers/net/wireless/ath/ath10k/pci.h +++ b/drivers/net/wireless/ath/ath10k/pci.h @@ -321,15 +321,17 @@ static inline u32 ath10k_pci_read32(struct ath10k *ar, u32 offset) return ioread32(ar_pci->mem + offset); } -void ath10k_do_pci_wake(struct ath10k *ar); +int ath10k_do_pci_wake(struct ath10k *ar); void ath10k_do_pci_sleep(struct ath10k *ar); -static inline void ath10k_pci_wake(struct ath10k *ar) +static inline int ath10k_pci_wake(struct ath10k *ar) { struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); if (test_bit(ATH10K_PCI_FEATURE_SOC_POWER_SAVE, ar_pci->features)) - ath10k_do_pci_wake(ar); + return ath10k_do_pci_wake(ar); + + return 0; } static inline void ath10k_pci_sleep(struct ath10k *ar) -- cgit v0.10.2 From e9780367b0f43536b460fd83931f7c111ec99470 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 10:02:15 +0300 Subject: ath10k: simplify ath10k_ce_init() wake up handling ath10k_ce_init() and the functions it calls wakeup the chip multiple times. Simplify that to call ath10k_pci_wake() only once. This also makes it easier to add error handling when wakeup fails. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 19f23a2..afe5df4 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -946,7 +946,6 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, src_ring->nentries = nentries; src_ring->nentries_mask = nentries - 1; - ath10k_pci_wake(ar); src_ring->sw_index = ath10k_ce_src_ring_read_index_get(ar, ctrl_addr); src_ring->sw_index &= src_ring->nentries_mask; src_ring->hw_index = src_ring->sw_index; @@ -954,7 +953,6 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, src_ring->write_index = ath10k_ce_src_ring_write_index_get(ar, ctrl_addr); src_ring->write_index &= src_ring->nentries_mask; - ath10k_pci_sleep(ar); src_ring->per_transfer_context = (void **)ptr; @@ -1004,7 +1002,6 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, src_ring->shadow_base_unaligned, CE_DESC_RING_ALIGN); - ath10k_pci_wake(ar); ath10k_ce_src_ring_base_addr_set(ar, ctrl_addr, src_ring->base_addr_ce_space); ath10k_ce_src_ring_size_set(ar, ctrl_addr, nentries); @@ -1012,7 +1009,6 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, ath10k_ce_src_ring_byte_swap_set(ar, ctrl_addr, 0); ath10k_ce_src_ring_lowmark_set(ar, ctrl_addr, 0); ath10k_ce_src_ring_highmark_set(ar, ctrl_addr, nentries); - ath10k_pci_sleep(ar); return 0; } @@ -1049,13 +1045,11 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, dest_ring->nentries = nentries; dest_ring->nentries_mask = nentries - 1; - ath10k_pci_wake(ar); dest_ring->sw_index = ath10k_ce_dest_ring_read_index_get(ar, ctrl_addr); dest_ring->sw_index &= dest_ring->nentries_mask; dest_ring->write_index = ath10k_ce_dest_ring_write_index_get(ar, ctrl_addr); dest_ring->write_index &= dest_ring->nentries_mask; - ath10k_pci_sleep(ar); dest_ring->per_transfer_context = (void **)ptr; @@ -1090,14 +1084,12 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, dest_ring->base_addr_ce_space_unaligned, CE_DESC_RING_ALIGN); - ath10k_pci_wake(ar); ath10k_ce_dest_ring_base_addr_set(ar, ctrl_addr, dest_ring->base_addr_ce_space); ath10k_ce_dest_ring_size_set(ar, ctrl_addr, nentries); ath10k_ce_dest_ring_byte_swap_set(ar, ctrl_addr, 0); ath10k_ce_dest_ring_lowmark_set(ar, ctrl_addr, 0); ath10k_ce_dest_ring_highmark_set(ar, ctrl_addr, nentries); - ath10k_pci_sleep(ar); return 0; } @@ -1138,6 +1130,10 @@ struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar, u32 ctrl_addr = ath10k_ce_base_address(ce_id); int ret; + ret = ath10k_pci_wake(ar); + if (ret) + return NULL; + ce_state = ath10k_ce_init_state(ar, ce_id, attr); if (!ce_state) { ath10k_err("Failed to initialize CE state for ID: %d\n", ce_id); @@ -1165,8 +1161,8 @@ struct ath10k_ce_pipe *ath10k_ce_init(struct ath10k *ar, } /* Enable CE error interrupts */ - ath10k_pci_wake(ar); ath10k_ce_error_intr_enable(ar, ctrl_addr); + ath10k_pci_sleep(ar); return ce_state; -- cgit v0.10.2 From e01ae68c5d8889588db6b7fcf3e3d7821a3365fb Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 11:22:14 +0300 Subject: ath10k: check chip id from the soc register during probe ath10k doesn't support qca988x hw1.0 boards anymore. Unfortunately the PCI id is the same in hw1.0 and hw2.0 so ath10k tries to use hw1.0 boards anyway. But without hw1.0 workarounds in place ath10k just crashes horribly. To avoid using hw1.0 boards at all add a chip id detection and fail the probe if hw1.0 is detected: [ 5265.786408] ath10k: ERROR: qca988x hw1.0 is not supported [ 5265.786497] ath10k: Unsupported chip id 0x043200ff [ 5265.786574] ath10k: could not register driver core (-95) [ 5265.793191] ath10k_pci: probe of 0000:02:00.0 failed with error -95 Also add a warning if there's an unknown chip id but continue the boot process normally anyway. Reported-by: Zaki Bakar Tested-by: Christian Lamparter Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 04c132e..2dd39a8 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -706,10 +706,43 @@ static int ath10k_core_probe_fw(struct ath10k *ar) return 0; } -int ath10k_core_register(struct ath10k *ar) +static int ath10k_core_check_chip_id(struct ath10k *ar) +{ + u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV); + + /* Check that we are not using hw1.0 (some of them have same pci id + * as hw2.0) before doing anything else as ath10k crashes horribly + * due to missing hw1.0 workarounds. */ + switch (hw_revision) { + case QCA988X_HW_1_0_CHIP_ID_REV: + ath10k_err("ERROR: qca988x hw1.0 is not supported\n"); + return -EOPNOTSUPP; + + case QCA988X_HW_2_0_CHIP_ID_REV: + /* known hardware revision, continue normally */ + return 0; + + default: + ath10k_warn("Warning: hardware revision unknown (0x%x), expect problems\n", + ar->chip_id); + return 0; + } + + return 0; +} + +int ath10k_core_register(struct ath10k *ar, u32 chip_id) { int status; + ar->chip_id = chip_id; + + status = ath10k_core_check_chip_id(ar); + if (status) { + ath10k_err("Unsupported chip id 0x%08x\n", ar->chip_id); + return status; + } + status = ath10k_core_probe_fw(ar); if (status) { ath10k_err("could not probe fw (%d)\n", status); diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index ab05c4c..174c4b4 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -284,6 +284,7 @@ struct ath10k { struct device *dev; u8 mac_addr[ETH_ALEN]; + u32 chip_id; u32 target_version; u8 fw_version_major; u32 fw_version_minor; @@ -403,7 +404,7 @@ void ath10k_core_destroy(struct ath10k *ar); int ath10k_core_start(struct ath10k *ar); void ath10k_core_stop(struct ath10k *ar); -int ath10k_core_register(struct ath10k *ar); +int ath10k_core_register(struct ath10k *ar, u32 chip_id); void ath10k_core_unregister(struct ath10k *ar); #endif /* _CORE_H_ */ diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 5708888..643f0c9 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -26,8 +26,12 @@ #define SUPPORTED_FW_RELEASE 0 #define SUPPORTED_FW_BUILD 636 +/* QCA988X 1.0 definitions (unsupported) */ +#define QCA988X_HW_1_0_CHIP_ID_REV 0x0 + /* QCA988X 2.0 definitions */ #define QCA988X_HW_2_0_VERSION 0x4100016c +#define QCA988X_HW_2_0_CHIP_ID_REV 0x2 #define QCA988X_HW_2_0_FW_DIR "ath10k/QCA988X/hw2.0" #define QCA988X_HW_2_0_FW_FILE "firmware.bin" #define QCA988X_HW_2_0_OTP_FILE "otp.bin" @@ -164,6 +168,10 @@ enum ath10k_mcast2ucast_mode { #define SOC_LPO_CAL_ENABLE_LSB 20 #define SOC_LPO_CAL_ENABLE_MASK 0x00100000 +#define SOC_CHIP_ID_ADDRESS 0x000000ec +#define SOC_CHIP_ID_REV_LSB 8 +#define SOC_CHIP_ID_REV_MASK 0x00000f00 + #define WLAN_RESET_CONTROL_COLD_RST_MASK 0x00000008 #define WLAN_RESET_CONTROL_WARM_RST_MASK 0x00000004 #define WLAN_SYSTEM_SLEEP_DISABLE_LSB 0 diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 29ccd04..622901d 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2390,7 +2390,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev, int ret = 0; struct ath10k *ar; struct ath10k_pci *ar_pci; - u32 lcr_val; + u32 lcr_val, chip_id; ath10k_dbg(ATH10K_DBG_PCI, "%s\n", __func__); @@ -2492,7 +2492,18 @@ static int ath10k_pci_probe(struct pci_dev *pdev, spin_lock_init(&ar_pci->ce_lock); - ret = ath10k_core_register(ar); + ret = ath10k_do_pci_wake(ar); + if (ret) { + ath10k_err("Failed to get chip id: %d\n", ret); + return ret; + } + + chip_id = ath10k_pci_read32(ar, + RTC_SOC_BASE_ADDRESS + SOC_CHIP_ID_ADDRESS); + + ath10k_do_pci_sleep(ar); + + ret = ath10k_core_register(ar, chip_id); if (ret) { ath10k_err("could not register driver core (%d)\n", ret); goto err_iomap; -- cgit v0.10.2 From 763b8cd31493f452094fd0eaeedb8cad37c756a2 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 1 Sep 2013 11:22:21 +0300 Subject: ath10k: add chip_id file to debugfs So that's it's possible to query chip id from ath10k anytime. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index fcb40cc..09f535a 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -498,6 +498,25 @@ static const struct file_operations fops_simulate_fw_crash = { .llseek = default_llseek, }; +static ssize_t ath10k_read_chip_id(struct file *file, char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath10k *ar = file->private_data; + unsigned int len; + char buf[50]; + + len = scnprintf(buf, sizeof(buf), "0x%08x\n", ar->chip_id); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static const struct file_operations fops_chip_id = { + .read = ath10k_read_chip_id, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + int ath10k_debug_create(struct ath10k *ar) { ar->debug.debugfs_phy = debugfs_create_dir("ath10k", @@ -517,6 +536,9 @@ int ath10k_debug_create(struct ath10k *ar) debugfs_create_file("simulate_fw_crash", S_IRUSR, ar->debug.debugfs_phy, ar, &fops_simulate_fw_crash); + debugfs_create_file("chip_id", S_IRUSR, ar->debug.debugfs_phy, + ar, &fops_chip_id); + return 0; } #endif /* CONFIG_ATH10K_DEBUGFS */ -- cgit v0.10.2 From 55d761b8787afa60c361c30799f3bff681e42b1b Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Wed, 4 Sep 2013 23:51:28 -0400 Subject: ath10k: add missing braces to ath10k_pci_tx_pipe_cleanup The indentation here implies this was meant to be a multi-statement if, but it lacks the braces. kvalo: add "ath10k: " prefix Signed-off-by: Dave Jones Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 622901d..880fcd0d 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -1316,7 +1316,7 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf, &ce_data, &nbytes, &id) == 0) { - if (netbuf != CE_SENDLIST_ITEM_CTXT) + if (netbuf != CE_SENDLIST_ITEM_CTXT) { /* * Indicate the completion to higer layer to free * the buffer @@ -1325,6 +1325,7 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) ar_pci->msg_callbacks_current.tx_completion(ar, netbuf, id); + } } } -- cgit v0.10.2 From a9bf05062d13b255d4231ca2637892d9b381a9d4 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Tue, 3 Sep 2013 11:43:55 +0300 Subject: ath10k: add trace event ath10k_htt_stats For analysing various data path statistics in user space. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 9bb0ae89..af31d2f 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -20,6 +20,7 @@ #include "htt.h" #include "txrx.h" #include "debug.h" +#include "trace.h" #include @@ -1198,8 +1199,10 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) case HTT_T2H_MSG_TYPE_TEST: /* FIX THIS */ break; - case HTT_T2H_MSG_TYPE_TX_INSPECT_IND: case HTT_T2H_MSG_TYPE_STATS_CONF: + trace_ath10k_htt_stats(skb->data, skb->len); + break; + case HTT_T2H_MSG_TYPE_TX_INSPECT_IND: case HTT_T2H_MSG_TYPE_RX_ADDBA: case HTT_T2H_MSG_TYPE_RX_DELBA: case HTT_T2H_MSG_TYPE_RX_FLUSH: diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h index 85e806b..bf1ceb8 100644 --- a/drivers/net/wireless/ath/ath10k/trace.h +++ b/drivers/net/wireless/ath/ath10k/trace.h @@ -158,6 +158,27 @@ TRACE_EVENT(ath10k_wmi_event, ) ); +TRACE_EVENT(ath10k_htt_stats, + TP_PROTO(void *buf, size_t buf_len), + + TP_ARGS(buf, buf_len), + + TP_STRUCT__entry( + __field(size_t, buf_len) + __dynamic_array(u8, buf, buf_len) + ), + + TP_fast_assign( + __entry->buf_len = buf_len; + memcpy(__get_dynamic_array(buf), buf, buf_len); + ), + + TP_printk( + "len %zu", + __entry->buf_len + ) +); + #endif /* _TRACE_H_ || TRACE_HEADER_MULTI_READ*/ /* we don't want to use include/trace/events */ -- cgit v0.10.2 From db66ea0442daaa4ee5fb8b3083bde1728ca3a9ba Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Tue, 3 Sep 2013 11:44:03 +0300 Subject: ath10k: implement ath10k_debug_start/stop() Needed for the HTT stats implementation. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 2dd39a8..4f2b0e7 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -630,6 +630,10 @@ int ath10k_core_start(struct ath10k *ar) if (status) goto err_disconnect_htc; + status = ath10k_debug_start(ar); + if (status) + goto err_disconnect_htc; + ar->free_vdev_map = (1 << TARGET_NUM_VDEVS) - 1; return 0; @@ -647,6 +651,7 @@ EXPORT_SYMBOL(ath10k_core_start); void ath10k_core_stop(struct ath10k *ar) { + ath10k_debug_stop(ar); ath10k_htc_stop(&ar->htc); ath10k_htt_detach(&ar->htt); ath10k_wmi_detach(ar); @@ -777,6 +782,7 @@ void ath10k_core_unregister(struct ath10k *ar) * Otherwise we will fail to submit commands to FW and mac80211 will be * unhappy about callback failures. */ ath10k_mac_unregister(ar); + ath10k_core_free_firmware_files(ar); } EXPORT_SYMBOL(ath10k_core_unregister); diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 09f535a..219d469 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -517,6 +517,15 @@ static const struct file_operations fops_chip_id = { .llseek = default_llseek, }; +int ath10k_debug_start(struct ath10k *ar) +{ + return 0; +} + +void ath10k_debug_stop(struct ath10k *ar) +{ +} + int ath10k_debug_create(struct ath10k *ar) { ar->debug.debugfs_phy = debugfs_create_dir("ath10k", @@ -541,6 +550,7 @@ int ath10k_debug_create(struct ath10k *ar) return 0; } + #endif /* CONFIG_ATH10K_DEBUGFS */ #ifdef CONFIG_ATH10K_DEBUG diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h index 168140c..9c442a8 100644 --- a/drivers/net/wireless/ath/ath10k/debug.h +++ b/drivers/net/wireless/ath/ath10k/debug.h @@ -42,6 +42,8 @@ extern __printf(1, 2) int ath10k_err(const char *fmt, ...); extern __printf(1, 2) int ath10k_warn(const char *fmt, ...); #ifdef CONFIG_ATH10K_DEBUGFS +int ath10k_debug_start(struct ath10k *ar); +void ath10k_debug_stop(struct ath10k *ar); int ath10k_debug_create(struct ath10k *ar); void ath10k_debug_read_service_map(struct ath10k *ar, void *service_map, @@ -50,6 +52,15 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, struct wmi_stats_event *ev); #else +int ath10k_debug_start(struct ath10k *ar) +{ + return 0; +} + +void ath10k_debug_stop(struct ath10k *ar) +{ +} + static inline int ath10k_debug_create(struct ath10k *ar) { return 0; -- cgit v0.10.2 From a3d135e566e269c7cfed51355c422e7e1c0b2b39 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Tue, 3 Sep 2013 11:44:10 +0300 Subject: ath10k: add htt_stats_enable debugfs file Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 174c4b4..22b17d6 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -246,6 +246,9 @@ struct ath10k_debug { u32 wmi_service_bitmap[WMI_SERVICE_BM_SIZE]; struct completion event_stats_compl; + + unsigned long htt_stats_mask; + struct delayed_work htt_stats_dwork; }; enum ath10k_state { diff --git a/drivers/net/wireless/ath/ath10k/debug.c b/drivers/net/wireless/ath/ath10k/debug.c index 219d469..59615c7 100644 --- a/drivers/net/wireless/ath/ath10k/debug.c +++ b/drivers/net/wireless/ath/ath10k/debug.c @@ -21,6 +21,9 @@ #include "core.h" #include "debug.h" +/* ms */ +#define ATH10K_DEBUG_HTT_STATS_INTERVAL 1000 + static int ath10k_printk(const char *level, const char *fmt, ...) { struct va_format vaf; @@ -517,13 +520,115 @@ static const struct file_operations fops_chip_id = { .llseek = default_llseek, }; +static int ath10k_debug_htt_stats_req(struct ath10k *ar) +{ + u64 cookie; + int ret; + + lockdep_assert_held(&ar->conf_mutex); + + if (ar->debug.htt_stats_mask == 0) + /* htt stats are disabled */ + return 0; + + if (ar->state != ATH10K_STATE_ON) + return 0; + + cookie = get_jiffies_64(); + + ret = ath10k_htt_h2t_stats_req(&ar->htt, ar->debug.htt_stats_mask, + cookie); + if (ret) { + ath10k_warn("failed to send htt stats request: %d\n", ret); + return ret; + } + + queue_delayed_work(ar->workqueue, &ar->debug.htt_stats_dwork, + msecs_to_jiffies(ATH10K_DEBUG_HTT_STATS_INTERVAL)); + + return 0; +} + +static void ath10k_debug_htt_stats_dwork(struct work_struct *work) +{ + struct ath10k *ar = container_of(work, struct ath10k, + debug.htt_stats_dwork.work); + + mutex_lock(&ar->conf_mutex); + + ath10k_debug_htt_stats_req(ar); + + mutex_unlock(&ar->conf_mutex); +} + +static ssize_t ath10k_read_htt_stats_mask(struct file *file, + char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath10k *ar = file->private_data; + char buf[32]; + unsigned int len; + + len = scnprintf(buf, sizeof(buf), "%lu\n", ar->debug.htt_stats_mask); + + return simple_read_from_buffer(user_buf, count, ppos, buf, len); +} + +static ssize_t ath10k_write_htt_stats_mask(struct file *file, + const char __user *user_buf, + size_t count, loff_t *ppos) +{ + struct ath10k *ar = file->private_data; + unsigned long mask; + int ret; + + ret = kstrtoul_from_user(user_buf, count, 0, &mask); + if (ret) + return ret; + + /* max 8 bit masks (for now) */ + if (mask > 0xff) + return -E2BIG; + + mutex_lock(&ar->conf_mutex); + + ar->debug.htt_stats_mask = mask; + + ret = ath10k_debug_htt_stats_req(ar); + if (ret) + goto out; + + ret = count; + +out: + mutex_unlock(&ar->conf_mutex); + + return ret; +} + +static const struct file_operations fops_htt_stats_mask = { + .read = ath10k_read_htt_stats_mask, + .write = ath10k_write_htt_stats_mask, + .open = simple_open, + .owner = THIS_MODULE, + .llseek = default_llseek, +}; + int ath10k_debug_start(struct ath10k *ar) { + int ret; + + ret = ath10k_debug_htt_stats_req(ar); + if (ret) + /* continue normally anyway, this isn't serious */ + ath10k_warn("failed to start htt stats workqueue: %d\n", ret); + return 0; } void ath10k_debug_stop(struct ath10k *ar) { + cancel_delayed_work_sync(&ar->debug.htt_stats_dwork); } int ath10k_debug_create(struct ath10k *ar) @@ -534,6 +639,9 @@ int ath10k_debug_create(struct ath10k *ar) if (!ar->debug.debugfs_phy) return -ENOMEM; + INIT_DELAYED_WORK(&ar->debug.htt_stats_dwork, + ath10k_debug_htt_stats_dwork); + init_completion(&ar->debug.event_stats_compl); debugfs_create_file("fw_stats", S_IRUSR, ar->debug.debugfs_phy, ar, @@ -548,6 +656,9 @@ int ath10k_debug_create(struct ath10k *ar) debugfs_create_file("chip_id", S_IRUSR, ar->debug.debugfs_phy, ar, &fops_chip_id); + debugfs_create_file("htt_stats_mask", S_IRUSR, ar->debug.debugfs_phy, + ar, &fops_htt_stats_mask); + return 0; } diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h index 26c78a9..e090902 100644 --- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h @@ -1327,6 +1327,7 @@ void ath10k_htt_rx_detach(struct ath10k_htt *htt); void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb); void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb); int ath10k_htt_h2t_ver_req_msg(struct ath10k_htt *htt); +int ath10k_htt_h2t_stats_req(struct ath10k_htt *htt, u8 mask, u64 cookie); int ath10k_htt_send_rx_ring_cfg_ll(struct ath10k_htt *htt); void __ath10k_htt_tx_dec_pending(struct ath10k_htt *htt); diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index d4fb387..b6b1420 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -203,6 +203,48 @@ int ath10k_htt_h2t_ver_req_msg(struct ath10k_htt *htt) return 0; } +int ath10k_htt_h2t_stats_req(struct ath10k_htt *htt, u8 mask, u64 cookie) +{ + struct htt_stats_req *req; + struct sk_buff *skb; + struct htt_cmd *cmd; + int len = 0, ret; + + len += sizeof(cmd->hdr); + len += sizeof(cmd->stats_req); + + skb = ath10k_htc_alloc_skb(len); + if (!skb) + return -ENOMEM; + + skb_put(skb, len); + cmd = (struct htt_cmd *)skb->data; + cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_STATS_REQ; + + req = &cmd->stats_req; + + memset(req, 0, sizeof(*req)); + + /* currently we support only max 8 bit masks so no need to worry + * about endian support */ + req->upload_types[0] = mask; + req->reset_types[0] = mask; + req->stat_type = HTT_STATS_REQ_CFG_STAT_TYPE_INVALID; + req->cookie_lsb = cpu_to_le32(cookie & 0xffffffff); + req->cookie_msb = cpu_to_le32((cookie & 0xffffffff00000000ULL) >> 32); + + ATH10K_SKB_CB(skb)->htt.is_conf = true; + + ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb); + if (ret) { + ath10k_warn("failed to send htt type stats request: %d", ret); + dev_kfree_skb_any(skb); + return ret; + } + + return 0; +} + int ath10k_htt_send_rx_ring_cfg_ll(struct ath10k_htt *htt) { struct sk_buff *skb; -- cgit v0.10.2 From 03fc137b509fa698d9337ee54f765aa13fefd319 Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Tue, 3 Sep 2013 14:24:02 +0200 Subject: ath10k: set the UART baud rate to 19200 When configuring the host_interests over BMI, set the UART baud rate to 19200. This is valid for QCA988X_2.0 devices. kvalo: found during code review, there should not be any functionality changes Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 4f2b0e7..8a68839 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -435,6 +435,13 @@ static int ath10k_init_uart(struct ath10k *ar) return ret; } + /* Set the UART baud rate to 19200. */ + ret = ath10k_bmi_write32(ar, hi_desired_baud_rate, 19200); + if (ret) { + ath10k_warn("could not set the baud rate (%d)\n", ret); + return ret; + } + ath10k_info("UART prints enabled\n"); return 0; } -- cgit v0.10.2 From b8a1e00f1a9b861512b17038afda9e2f8b9f9bea Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Tue, 3 Sep 2013 14:24:03 +0200 Subject: ath10k: remove obsolete INIT STATUS definitions There's no functional changes. Just a small cleanup. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 08860c4..40fcf05 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -763,14 +763,6 @@ struct wmi_service_ready_event { struct wlan_host_mem_req mem_reqs[1]; } __packed; -/* - * status consists of upper 16 bits fo int status and lower 16 bits of - * module ID that retuned status - */ -#define WLAN_INIT_STATUS_SUCCESS 0x0 -#define WLAN_GET_INIT_STATUS_REASON(status) ((status) & 0xffff) -#define WLAN_GET_INIT_STATUS_MODULE_ID(status) (((status) >> 16) & 0xffff) - #define WMI_SERVICE_READY_TIMEOUT_HZ (5*HZ) #define WMI_UNIFIED_READY_TIMEOUT_HZ (5*HZ) -- cgit v0.10.2 From 5440ce253779fd42ae3b0df64d77430274079ab7 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 3 Sep 2013 15:09:58 +0200 Subject: ath10k: prevent CE from looping indefinitely The double while() could end up running forever. Inner while() would complete very fast. However the completion processing could take enough time for more completions to flow in. In that case the outer while() would not terminate and run again, and again. This could happen especially on a slow host system. This could lead to a system freeze during heavy traffic. Note: this doesn't solve all known starvation issues yet. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index afe5df4..924b29e 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -742,11 +742,6 @@ void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id) struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ath10k_ce_pipe *ce_state = &ar_pci->ce_states[ce_id]; u32 ctrl_addr = ce_state->ctrl_addr; - void *transfer_context; - u32 buf; - unsigned int nbytes; - unsigned int id; - unsigned int flags; int ret; ret = ath10k_pci_wake(ar); @@ -759,38 +754,15 @@ void ath10k_ce_per_engine_service(struct ath10k *ar, unsigned int ce_id) ath10k_ce_engine_int_status_clear(ar, ctrl_addr, HOST_IS_COPY_COMPLETE_MASK); - if (ce_state->recv_cb) { - /* - * Pop completed recv buffers and call the registered - * recv callback for each - */ - while (ath10k_ce_completed_recv_next_nolock(ce_state, - &transfer_context, - &buf, &nbytes, - &id, &flags) == 0) { - spin_unlock_bh(&ar_pci->ce_lock); - ce_state->recv_cb(ce_state, transfer_context, buf, - nbytes, id, flags); - spin_lock_bh(&ar_pci->ce_lock); - } - } + spin_unlock_bh(&ar_pci->ce_lock); - if (ce_state->send_cb) { - /* - * Pop completed send buffers and call the registered - * send callback for each - */ - while (ath10k_ce_completed_send_next_nolock(ce_state, - &transfer_context, - &buf, - &nbytes, - &id) == 0) { - spin_unlock_bh(&ar_pci->ce_lock); - ce_state->send_cb(ce_state, transfer_context, - buf, nbytes, id); - spin_lock_bh(&ar_pci->ce_lock); - } - } + if (ce_state->recv_cb) + ce_state->recv_cb(ce_state); + + if (ce_state->send_cb) + ce_state->send_cb(ce_state); + + spin_lock_bh(&ar_pci->ce_lock); /* * Misc CE interrupts are not being handled, but still need @@ -881,11 +853,7 @@ void ath10k_ce_disable_interrupts(struct ath10k *ar) } void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state, - void (*send_cb)(struct ath10k_ce_pipe *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id), + void (*send_cb)(struct ath10k_ce_pipe *), int disable_interrupts) { struct ath10k *ar = ce_state->ar; @@ -898,12 +866,7 @@ void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state, } void ath10k_ce_recv_cb_register(struct ath10k_ce_pipe *ce_state, - void (*recv_cb)(struct ath10k_ce_pipe *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id, - unsigned int flags)) + void (*recv_cb)(struct ath10k_ce_pipe *)) { struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h index cfef7d0..fb22361 100644 --- a/drivers/net/wireless/ath/ath10k/ce.h +++ b/drivers/net/wireless/ath/ath10k/ce.h @@ -116,17 +116,8 @@ struct ath10k_ce_pipe { u32 ctrl_addr; - void (*send_cb) (struct ath10k_ce_pipe *ce_state, - void *per_transfer_send_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id); - void (*recv_cb) (struct ath10k_ce_pipe *ce_state, - void *per_transfer_recv_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id, - unsigned int flags); + void (*send_cb)(struct ath10k_ce_pipe *); + void (*recv_cb)(struct ath10k_ce_pipe *); unsigned int src_sz_max; struct ath10k_ce_ring *src_ring; @@ -181,11 +172,7 @@ int ath10k_ce_send(struct ath10k_ce_pipe *ce_state, unsigned int flags); void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state, - void (*send_cb)(struct ath10k_ce_pipe *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id), + void (*send_cb)(struct ath10k_ce_pipe *), int disable_interrupts); /* Append a simple buffer (address/length) to a sendlist. */ @@ -228,12 +215,7 @@ int ath10k_ce_recv_buf_enqueue(struct ath10k_ce_pipe *ce_state, u32 buffer); void ath10k_ce_recv_cb_register(struct ath10k_ce_pipe *ce_state, - void (*recv_cb)(struct ath10k_ce_pipe *ce_state, - void *transfer_context, - u32 buffer, - unsigned int nbytes, - unsigned int transfer_id, - unsigned int flags)); + void (*recv_cb)(struct ath10k_ce_pipe *)); /* recv flags */ /* Data is byte-swapped */ diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 880fcd0d..0ad65a0 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -612,19 +612,20 @@ exit: } /* Called by lower (CE) layer when a send to Target completes. */ -static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state, - void *transfer_context, - u32 ce_data, - unsigned int nbytes, - unsigned int transfer_id) +static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state) { struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id]; struct ath10k_pci_compl *compl; - bool process = false; + void *transfer_context; + u32 ce_data; + unsigned int nbytes; + unsigned int transfer_id; - do { + while (ath10k_ce_completed_send_next(ce_state, &transfer_context, + &ce_data, &nbytes, + &transfer_id) == 0) { /* * For the send completion of an item in sendlist, just * increment num_sends_allowed. The upper layer callback will @@ -655,38 +656,28 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state, spin_lock_bh(&ar_pci->compl_lock); list_add_tail(&compl->list, &ar_pci->compl_process); spin_unlock_bh(&ar_pci->compl_lock); - - process = true; - } while (ath10k_ce_completed_send_next(ce_state, - &transfer_context, - &ce_data, &nbytes, - &transfer_id) == 0); - - /* - * If only some of the items within a sendlist have completed, - * don't invoke completion processing until the entire sendlist - * has been sent. - */ - if (!process) - return; + } ath10k_pci_process_ce(ar); } /* Called by lower (CE) layer when data is received from the Target. */ -static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state, - void *transfer_context, u32 ce_data, - unsigned int nbytes, - unsigned int transfer_id, - unsigned int flags) +static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state) { struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ath10k_pci_pipe *pipe_info = &ar_pci->pipe_info[ce_state->id]; struct ath10k_pci_compl *compl; struct sk_buff *skb; + void *transfer_context; + u32 ce_data; + unsigned int nbytes; + unsigned int transfer_id; + unsigned int flags; - do { + while (ath10k_ce_completed_recv_next(ce_state, &transfer_context, + &ce_data, &nbytes, &transfer_id, + &flags) == 0) { compl = get_free_compl(pipe_info); if (!compl) break; @@ -709,12 +700,7 @@ static void ath10k_pci_ce_recv_data(struct ath10k_ce_pipe *ce_state, spin_lock_bh(&ar_pci->compl_lock); list_add_tail(&compl->list, &ar_pci->compl_process); spin_unlock_bh(&ar_pci->compl_lock); - - } while (ath10k_ce_completed_recv_next(ce_state, - &transfer_context, - &ce_data, &nbytes, - &transfer_id, - &flags) == 0); + } ath10k_pci_process_ce(ar); } @@ -1491,13 +1477,16 @@ err_dma: return ret; } -static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state, - void *transfer_context, - u32 data, - unsigned int nbytes, - unsigned int transfer_id) +static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state) { - struct bmi_xfer *xfer = transfer_context; + struct bmi_xfer *xfer; + u32 ce_data; + unsigned int nbytes; + unsigned int transfer_id; + + if (ath10k_ce_completed_send_next(ce_state, (void **)&xfer, &ce_data, + &nbytes, &transfer_id)) + return; if (xfer->wait_for_resp) return; @@ -1505,14 +1494,17 @@ static void ath10k_pci_bmi_send_done(struct ath10k_ce_pipe *ce_state, complete(&xfer->done); } -static void ath10k_pci_bmi_recv_data(struct ath10k_ce_pipe *ce_state, - void *transfer_context, - u32 data, - unsigned int nbytes, - unsigned int transfer_id, - unsigned int flags) +static void ath10k_pci_bmi_recv_data(struct ath10k_ce_pipe *ce_state) { - struct bmi_xfer *xfer = transfer_context; + struct bmi_xfer *xfer; + u32 ce_data; + unsigned int nbytes; + unsigned int transfer_id; + unsigned int flags; + + if (ath10k_ce_completed_recv_next(ce_state, (void **)&xfer, &ce_data, + &nbytes, &transfer_id, &flags)) + return; if (!xfer->wait_for_resp) { ath10k_warn("unexpected: BMI data received; ignoring\n"); -- cgit v0.10.2 From 4ed998dcbfa971e4c33edca7b2b39ce693014ba8 Mon Sep 17 00:00:00 2001 From: Bartosz Markowski Date: Mon, 9 Sep 2013 17:50:45 +0200 Subject: ath10k: define ath10k_debug_start/_stop as static inline Otherwise if CONFIG_ATH10K_DEBUGFS won't be set we will end up with multiple definitions and compilation failure in each place the header is included. Signed-off-by: Bartosz Markowski Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h index 9c442a8..376a56b 100644 --- a/drivers/net/wireless/ath/ath10k/debug.h +++ b/drivers/net/wireless/ath/ath10k/debug.h @@ -52,12 +52,12 @@ void ath10k_debug_read_target_stats(struct ath10k *ar, struct wmi_stats_event *ev); #else -int ath10k_debug_start(struct ath10k *ar) +static inline int ath10k_debug_start(struct ath10k *ar) { return 0; } -void ath10k_debug_stop(struct ath10k *ar) +static inline void ath10k_debug_stop(struct ath10k *ar) { } -- cgit v0.10.2 From f0bbea9981780e767c90955f47615e6f7382746f Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:55:32 +0300 Subject: ath10k: add BMI log level Also clean BMI log messages and add few more. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/bmi.c b/drivers/net/wireless/ath/ath10k/bmi.c index 744da6d..a1f0996 100644 --- a/drivers/net/wireless/ath/ath10k/bmi.c +++ b/drivers/net/wireless/ath/ath10k/bmi.c @@ -22,7 +22,8 @@ void ath10k_bmi_start(struct ath10k *ar) { - ath10k_dbg(ATH10K_DBG_CORE, "BMI started\n"); + ath10k_dbg(ATH10K_DBG_BMI, "bmi start\n"); + ar->bmi.done_sent = false; } @@ -32,8 +33,10 @@ int ath10k_bmi_done(struct ath10k *ar) u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.done); int ret; + ath10k_dbg(ATH10K_DBG_BMI, "bmi done\n"); + if (ar->bmi.done_sent) { - ath10k_dbg(ATH10K_DBG_CORE, "%s skipped\n", __func__); + ath10k_dbg(ATH10K_DBG_BMI, "bmi skipped\n"); return 0; } @@ -46,7 +49,6 @@ int ath10k_bmi_done(struct ath10k *ar) return ret; } - ath10k_dbg(ATH10K_DBG_CORE, "BMI done\n"); return 0; } @@ -59,6 +61,8 @@ int ath10k_bmi_get_target_info(struct ath10k *ar, u32 resplen = sizeof(resp.get_target_info); int ret; + ath10k_dbg(ATH10K_DBG_BMI, "bmi get target info\n"); + if (ar->bmi.done_sent) { ath10k_warn("BMI Get Target Info Command disallowed\n"); return -EBUSY; @@ -80,6 +84,7 @@ int ath10k_bmi_get_target_info(struct ath10k *ar, target_info->version = __le32_to_cpu(resp.get_target_info.version); target_info->type = __le32_to_cpu(resp.get_target_info.type); + return 0; } @@ -92,15 +97,14 @@ int ath10k_bmi_read_memory(struct ath10k *ar, u32 rxlen; int ret; + ath10k_dbg(ATH10K_DBG_BMI, "bmi read address 0x%x length %d\n", + address, length); + if (ar->bmi.done_sent) { ath10k_warn("command disallowed\n"); return -EBUSY; } - ath10k_dbg(ATH10K_DBG_CORE, - "%s: (device: 0x%p, address: 0x%x, length: %d)\n", - __func__, ar, address, length); - while (length) { rxlen = min_t(u32, length, BMI_MAX_DATA_SIZE); @@ -133,15 +137,14 @@ int ath10k_bmi_write_memory(struct ath10k *ar, u32 txlen; int ret; + ath10k_dbg(ATH10K_DBG_BMI, "bmi write address 0x%x length %d\n", + address, length); + if (ar->bmi.done_sent) { ath10k_warn("command disallowed\n"); return -EBUSY; } - ath10k_dbg(ATH10K_DBG_CORE, - "%s: (device: 0x%p, address: 0x%x, length: %d)\n", - __func__, ar, address, length); - while (length) { txlen = min(length, BMI_MAX_DATA_SIZE - hdrlen); @@ -180,15 +183,14 @@ int ath10k_bmi_execute(struct ath10k *ar, u32 address, u32 *param) u32 resplen = sizeof(resp.execute); int ret; + ath10k_dbg(ATH10K_DBG_BMI, "bmi execute address 0x%x param 0x%x\n", + address, *param); + if (ar->bmi.done_sent) { ath10k_warn("command disallowed\n"); return -EBUSY; } - ath10k_dbg(ATH10K_DBG_CORE, - "%s: (device: 0x%p, address: 0x%x, param: %d)\n", - __func__, ar, address, *param); - cmd.id = __cpu_to_le32(BMI_EXECUTE); cmd.execute.addr = __cpu_to_le32(address); cmd.execute.param = __cpu_to_le32(*param); @@ -216,6 +218,9 @@ int ath10k_bmi_lz_data(struct ath10k *ar, const void *buffer, u32 length) u32 txlen; int ret; + ath10k_dbg(ATH10K_DBG_BMI, "bmi lz data buffer 0x%p length %d\n", + buffer, length); + if (ar->bmi.done_sent) { ath10k_warn("command disallowed\n"); return -EBUSY; @@ -250,6 +255,9 @@ int ath10k_bmi_lz_stream_start(struct ath10k *ar, u32 address) u32 cmdlen = sizeof(cmd.id) + sizeof(cmd.lz_start); int ret; + ath10k_dbg(ATH10K_DBG_BMI, "bmi lz stream start address 0x%x\n", + address); + if (ar->bmi.done_sent) { ath10k_warn("command disallowed\n"); return -EBUSY; @@ -275,6 +283,10 @@ int ath10k_bmi_fast_download(struct ath10k *ar, u32 trailer_len = length - head_len; int ret; + ath10k_dbg(ATH10K_DBG_BMI, + "bmi fast download address 0x%x buffer 0x%p length %d\n", + address, buffer, length); + ret = ath10k_bmi_lz_stream_start(ar, address); if (ret) return ret; diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h index 376a56b..e40e155 100644 --- a/drivers/net/wireless/ath/ath10k/debug.h +++ b/drivers/net/wireless/ath/ath10k/debug.h @@ -32,6 +32,7 @@ enum ath10k_debug_mask { ATH10K_DBG_HTT_DUMP = 0x00000080, ATH10K_DBG_MGMT = 0x00000100, ATH10K_DBG_DATA = 0x00000200, + ATH10K_DBG_BMI = 0x00000400, ATH10K_DBG_ANY = 0xffffffff, }; -- cgit v0.10.2 From b52b7688ac85819c9c99bfe0250913fd0053e665 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:55:38 +0300 Subject: ath10k: rename ATH10K_DBG_CORE to BOOT core.c mostly deals with driver and firmware starting related actions. And we can use the boot level also in other components, like PCI and HTT. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 8a68839..0ed60fd 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { static void ath10k_send_suspend_complete(struct ath10k *ar) { - ath10k_dbg(ATH10K_DBG_CORE, "%s\n", __func__); + ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__); ar->is_target_paused = true; wake_up(&ar->event_queue); @@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar) goto timeout; } - ath10k_dbg(ATH10K_DBG_CORE, "core wmi ready\n"); + ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n"); return 0; timeout: @@ -203,7 +203,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar, return ret; } - ath10k_dbg(ATH10K_DBG_CORE, + ath10k_dbg(ATH10K_DBG_BOOT, "ath10k: Board extended Data download addr: 0x%x\n", board_ext_data_addr); diff --git a/drivers/net/wireless/ath/ath10k/debug.h b/drivers/net/wireless/ath/ath10k/debug.h index e40e155..fa58148 100644 --- a/drivers/net/wireless/ath/ath10k/debug.h +++ b/drivers/net/wireless/ath/ath10k/debug.h @@ -27,7 +27,7 @@ enum ath10k_debug_mask { ATH10K_DBG_HTC = 0x00000004, ATH10K_DBG_HTT = 0x00000008, ATH10K_DBG_MAC = 0x00000010, - ATH10K_DBG_CORE = 0x00000020, + ATH10K_DBG_BOOT = 0x00000020, ATH10K_DBG_PCI_DUMP = 0x00000040, ATH10K_DBG_HTT_DUMP = 0x00000080, ATH10K_DBG_MGMT = 0x00000100, -- cgit v0.10.2 From effea9688dae6ac1073b9f086903ddda8dda0b5a Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:55:44 +0300 Subject: ath10k: cleanup debug messages in core.c Fix them to follow the general logging style in ath10k. While at it, add print id chip_id to the debug log. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 0ed60fd..76906d5 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -53,7 +53,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = { static void ath10k_send_suspend_complete(struct ath10k *ar) { - ath10k_dbg(ATH10K_DBG_BOOT, "%s\n", __func__); + ath10k_dbg(ATH10K_DBG_BOOT, "boot suspend complete\n"); ar->is_target_paused = true; wake_up(&ar->event_queue); @@ -101,7 +101,7 @@ static int ath10k_init_connect_htc(struct ath10k *ar) goto timeout; } - ath10k_dbg(ATH10K_DBG_BOOT, "core wmi ready\n"); + ath10k_dbg(ATH10K_DBG_BOOT, "boot wmi ready\n"); return 0; timeout: @@ -204,7 +204,7 @@ static int ath10k_push_board_ext_data(struct ath10k *ar, } ath10k_dbg(ATH10K_DBG_BOOT, - "ath10k: Board extended Data download addr: 0x%x\n", + "boot push board extended data addr 0x%x\n", board_ext_data_addr); if (board_ext_data_addr == 0) @@ -722,6 +722,9 @@ static int ath10k_core_check_chip_id(struct ath10k *ar) { u32 hw_revision = MS(ar->chip_id, SOC_CHIP_ID_REV); + ath10k_dbg(ATH10K_DBG_BOOT, "boot chip_id 0x%08x hw_revision 0x%x\n", + ar->chip_id, hw_revision); + /* Check that we are not using hw1.0 (some of them have same pci id * as hw2.0) before doing anything else as ath10k crashes horribly * due to missing hw1.0 workarounds. */ -- cgit v0.10.2 From 24cfade11e20255f21ae1ef50591208ab3fe6a4c Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:55:50 +0300 Subject: ath10k: add boot debug messages to pci.c and ce.c To unify all boot related debug messages into one debug level. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 924b29e..4f8373c 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -973,6 +973,10 @@ static int ath10k_ce_init_src_ring(struct ath10k *ar, ath10k_ce_src_ring_lowmark_set(ar, ctrl_addr, 0); ath10k_ce_src_ring_highmark_set(ar, ctrl_addr, nentries); + ath10k_dbg(ATH10K_DBG_BOOT, + "boot ce src ring id %d entries %d base_addr %p\n", + ce_id, nentries, src_ring->base_addr_owner_space); + return 0; } @@ -1054,6 +1058,10 @@ static int ath10k_ce_init_dest_ring(struct ath10k *ar, ath10k_ce_dest_ring_lowmark_set(ar, ctrl_addr, 0); ath10k_ce_dest_ring_highmark_set(ar, ctrl_addr, nentries); + ath10k_dbg(ATH10K_DBG_BOOT, + "boot ce dest ring id %d entries %d base_addr %p\n", + ce_id, nentries, dest_ring->base_addr_owner_space); + return 0; } diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 0ad65a0..899a8c0 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2367,10 +2367,10 @@ static void ath10k_pci_dump_features(struct ath10k_pci *ar_pci) switch (i) { case ATH10K_PCI_FEATURE_MSI_X: - ath10k_dbg(ATH10K_DBG_PCI, "device supports MSI-X\n"); + ath10k_dbg(ATH10K_DBG_BOOT, "device supports MSI-X\n"); break; case ATH10K_PCI_FEATURE_SOC_POWER_SAVE: - ath10k_dbg(ATH10K_DBG_PCI, "QCA98XX SoC power save enabled\n"); + ath10k_dbg(ATH10K_DBG_BOOT, "QCA98XX SoC power save enabled\n"); break; } } @@ -2496,6 +2496,8 @@ static int ath10k_pci_probe(struct pci_dev *pdev, ath10k_do_pci_sleep(ar); + ath10k_dbg(ATH10K_DBG_BOOT, "boot pci_mem 0x%p\n", ar_pci->mem); + ret = ath10k_core_register(ar, chip_id); if (ret) { ath10k_err("could not register driver core (%d)\n", ret); -- cgit v0.10.2 From 42a2efbc578339f2e314703a818efaefb4b4af81 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:55:56 +0300 Subject: ath10k: add boot debug messages to htc.c To unify the boot debug level. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index 7d445d3..f03fd8d 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -752,8 +752,8 @@ int ath10k_htc_connect_service(struct ath10k_htc *htc, tx_alloc = ath10k_htc_get_credit_allocation(htc, conn_req->service_id); if (!tx_alloc) - ath10k_dbg(ATH10K_DBG_HTC, - "HTC Service %s does not allocate target credits\n", + ath10k_dbg(ATH10K_DBG_BOOT, + "boot htc service %s does not allocate target credits\n", htc_service_name(conn_req->service_id)); skb = ath10k_htc_build_tx_ctrl_skb(htc->ar); @@ -873,19 +873,19 @@ setup: if (status) return status; - ath10k_dbg(ATH10K_DBG_HTC, - "HTC service: %s UL pipe: %d DL pipe: %d eid: %d ready\n", + ath10k_dbg(ATH10K_DBG_BOOT, + "boot htc service '%s' ul pipe %d dl pipe %d eid %d ready\n", htc_service_name(ep->service_id), ep->ul_pipe_id, ep->dl_pipe_id, ep->eid); - ath10k_dbg(ATH10K_DBG_HTC, - "EP %d UL polled: %d, DL polled: %d\n", + ath10k_dbg(ATH10K_DBG_BOOT, + "boot htc ep %d ul polled %d dl polled %d\n", ep->eid, ep->ul_is_polled, ep->dl_is_polled); if (disable_credit_flow_ctrl && ep->tx_credit_flow_enabled) { ep->tx_credit_flow_enabled = false; - ath10k_dbg(ATH10K_DBG_HTC, - "HTC service: %s eid: %d TX flow control disabled\n", + ath10k_dbg(ATH10K_DBG_BOOT, + "boot htc service '%s' eid %d TX flow control disabled\n", htc_service_name(ep->service_id), assigned_eid); } -- cgit v0.10.2 From aad0b65f5cb83ce0473367838a960f46577da8ac Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:56:02 +0300 Subject: ath10k: add boot messages to htt.c To unify the boot debug level. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index af31d2f..a39fbf4 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -502,7 +502,7 @@ int ath10k_htt_rx_attach(struct ath10k_htt *htt) if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level)) goto err_fill_ring; - ath10k_dbg(ATH10K_DBG_HTT, "HTT RX ring size: %d, fill_level: %d\n", + ath10k_dbg(ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n", htt->rx_ring.size, htt->rx_ring.fill_level); return 0; diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index b6b1420..4548128 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -96,7 +96,7 @@ int ath10k_htt_tx_attach(struct ath10k_htt *htt) htt->max_num_pending_tx = ath10k_hif_get_free_queue_number(htt->ar, pipe); - ath10k_dbg(ATH10K_DBG_HTT, "htt tx max num pending tx %d\n", + ath10k_dbg(ATH10K_DBG_BOOT, "htt tx max num pending tx %d\n", htt->max_num_pending_tx); htt->pending_tx = kzalloc(sizeof(*htt->pending_tx) * -- cgit v0.10.2 From 60c3daa88873df9c90465c09fba0b7985f9db939 Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:56:07 +0300 Subject: ath10k: clean mac.c debug messages Just to unify with the rest of debug messages. Minimal functional changes, only major ones are removal of the awkward "else" style in debug messages. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 248248b..b8c81bb 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -604,7 +604,7 @@ static int ath10k_monitor_create(struct ath10k *ar) goto vdev_fail; } - ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface created, vdev id: %d\n", + ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d created\n", ar->monitor_vdev_id); ar->monitor_present = true; @@ -636,7 +636,7 @@ static int ath10k_monitor_destroy(struct ath10k *ar) ar->free_vdev_map |= 1 << (ar->monitor_vdev_id); ar->monitor_present = false; - ath10k_dbg(ATH10K_DBG_MAC, "Monitor interface destroyed, vdev id: %d\n", + ath10k_dbg(ATH10K_DBG_MAC, "mac monitor vdev %d deleted\n", ar->monitor_vdev_id); return ret; } @@ -665,7 +665,7 @@ static void ath10k_control_beaconing(struct ath10k_vif *arvif, arvif->vdev_id); return; } - ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d up\n", arvif->vdev_id); + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d up\n", arvif->vdev_id); } static void ath10k_control_ibss(struct ath10k_vif *arvif, @@ -749,14 +749,14 @@ static void ath10k_ps_iter(void *data, u8 *mac, struct ieee80211_vif *vif) psmode = WMI_STA_PS_MODE_DISABLED; } + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d psmode %s\n", + arvif->vdev_id, psmode ? "enable" : "disable"); + ar_iter->ret = ath10k_wmi_set_psmode(ar_iter->ar, arvif->vdev_id, psmode); if (ar_iter->ret) ath10k_warn("Failed to set PS Mode: %d for VDEV: %d\n", psmode, arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, "Set PS Mode: %d for VDEV: %d\n", - psmode, arvif->vdev_id); } /**********************/ @@ -946,7 +946,8 @@ static void ath10k_peer_assoc_h_ht(struct ath10k *ar, arg->peer_ht_rates.num_rates = n; arg->peer_num_spatial_streams = max((n+7) / 8, 1); - ath10k_dbg(ATH10K_DBG_MAC, "mcs cnt %d nss %d\n", + ath10k_dbg(ATH10K_DBG_MAC, "mac ht peer %pM mcs cnt %d nss %d\n", + arg->addr, arg->peer_ht_rates.num_rates, arg->peer_num_spatial_streams); } @@ -966,7 +967,7 @@ static void ath10k_peer_assoc_h_qos_ap(struct ath10k *ar, arg->peer_flags |= WMI_PEER_QOS; if (sta->wme && sta->uapsd_queues) { - ath10k_dbg(ATH10K_DBG_MAC, "uapsd_queues: 0x%X, max_sp: %d\n", + ath10k_dbg(ATH10K_DBG_MAC, "mac uapsd_queues 0x%x max_sp %d\n", sta->uapsd_queues, sta->max_sp); arg->peer_flags |= WMI_PEER_APSD; @@ -1045,7 +1046,8 @@ static void ath10k_peer_assoc_h_vht(struct ath10k *ar, arg->peer_vht_rates.tx_mcs_set = __le16_to_cpu(vht_cap->vht_mcs.tx_mcs_map); - ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer\n"); + ath10k_dbg(ATH10K_DBG_MAC, "mac vht peer %pM max_mpdu %d flags 0x%x\n", + sta->addr, arg->peer_max_mpdu, arg->peer_flags); } static void ath10k_peer_assoc_h_qos(struct ath10k *ar, @@ -1102,6 +1104,9 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, break; } + ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n", + sta->addr, phymode); + arg->peer_phymode = phymode; WARN_ON(phymode == MODE_UNKNOWN); } @@ -1159,15 +1164,15 @@ static void ath10k_bss_assoc(struct ieee80211_hw *hw, rcu_read_unlock(); + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d up (associated) bssid %pM aid %d\n", + arvif->vdev_id, bss_conf->bssid, bss_conf->aid); + ret = ath10k_wmi_vdev_up(ar, arvif->vdev_id, bss_conf->aid, bss_conf->bssid); if (ret) ath10k_warn("VDEV: %d up failed: ret %d\n", arvif->vdev_id, ret); - else - ath10k_dbg(ATH10K_DBG_MAC, - "VDEV: %d associated, BSSID: %pM, AID: %d\n", - arvif->vdev_id, bss_conf->bssid, bss_conf->aid); } /* @@ -1188,10 +1193,11 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw, * No idea why this happens, even though VDEV-DOWN is supposed * to be analogous to link down, so just stop the VDEV. */ + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d stop (disassociated\n", + arvif->vdev_id); + + /* FIXME: check return value */ ret = ath10k_vdev_stop(arvif); - if (!ret) - ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d stopped\n", - arvif->vdev_id); /* * If we don't call VDEV-DOWN after VDEV-STOP FW will remain active and @@ -1200,10 +1206,10 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw, * interfaces as it expects there is no rx when no interface is * running. */ + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d down\n", arvif->vdev_id); + + /* FIXME: why don't we print error if wmi call fails? */ ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); - if (ret) - ath10k_dbg(ATH10K_DBG_MAC, "VDEV: %d ath10k_wmi_vdev_down failed (%d)\n", - arvif->vdev_id, ret); ath10k_wmi_flush_tx(ar); @@ -1330,8 +1336,8 @@ static int ath10k_update_channel_list(struct ath10k *ar) continue; ath10k_dbg(ATH10K_DBG_WMI, - "%s: [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n", - __func__, ch - arg.channels, arg.n_channels, + "mac channel [%zd/%d] freq %d maxpower %d regpower %d antenna %d mode %d\n", + ch - arg.channels, arg.n_channels, ch->freq, ch->max_power, ch->max_reg_power, ch->max_antenna_gain, ch->mode); @@ -1431,7 +1437,8 @@ static void ath10k_tx_h_update_wep_key(struct sk_buff *skb) if (key->keyidx == arvif->def_wep_key_index) return; - ath10k_dbg(ATH10K_DBG_MAC, "new wep keyidx will be %d\n", key->keyidx); + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d keyidx %d\n", + arvif->vdev_id, key->keyidx); ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, WMI_VDEV_PARAM_DEF_KEYID, @@ -1534,7 +1541,7 @@ void ath10k_offchan_tx_work(struct work_struct *work) mutex_lock(&ar->conf_mutex); - ath10k_dbg(ATH10K_DBG_MAC, "processing offchannel skb %p\n", + ath10k_dbg(ATH10K_DBG_MAC, "mac offchannel skb %p\n", skb); hdr = (struct ieee80211_hdr *)skb->data; @@ -1546,6 +1553,7 @@ void ath10k_offchan_tx_work(struct work_struct *work) spin_unlock_bh(&ar->data_lock); if (peer) + /* FIXME: should this use ath10k_warn()? */ ath10k_dbg(ATH10K_DBG_MAC, "peer %pM on vdev %d already present\n", peer_addr, vdev_id); @@ -1886,7 +1894,7 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed) mutex_lock(&ar->conf_mutex); if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { - ath10k_dbg(ATH10K_DBG_MAC, "Config channel %d mhz\n", + ath10k_dbg(ATH10K_DBG_MAC, "mac config channel %d mhz\n", conf->chandef.chan->center_freq); spin_lock_bh(&ar->data_lock); ar->rx_channel = conf->chandef.chan; @@ -1975,7 +1983,7 @@ static int ath10k_add_interface(struct ieee80211_hw *hw, break; } - ath10k_dbg(ATH10K_DBG_MAC, "Add interface: id %d type %d subtype %d\n", + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev create %d (add interface) type %d subtype %d\n", arvif->vdev_id, arvif->vdev_type, arvif->vdev_subtype); ret = ath10k_wmi_vdev_create(ar, arvif->vdev_id, arvif->vdev_type, @@ -2054,8 +2062,6 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw, mutex_lock(&ar->conf_mutex); - ath10k_dbg(ATH10K_DBG_MAC, "Remove interface: id %d\n", arvif->vdev_id); - ar->free_vdev_map |= 1 << (arvif->vdev_id); if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { @@ -2066,6 +2072,9 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw, kfree(arvif->u.ap.noa_data); } + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev delete %d (remove interface)\n", + arvif->vdev_id); + ret = ath10k_wmi_vdev_delete(ar, arvif->vdev_id); if (ret) ath10k_warn("WMI vdev delete failed: %d\n", ret); @@ -2107,18 +2116,20 @@ static void ath10k_configure_filter(struct ieee80211_hw *hw, if ((ar->filter_flags & FIF_PROMISC_IN_BSS) && !ar->monitor_enabled) { + ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d start\n", + ar->monitor_vdev_id); + ret = ath10k_monitor_start(ar, ar->monitor_vdev_id); if (ret) ath10k_warn("Unable to start monitor mode\n"); - else - ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode started\n"); } else if (!(ar->filter_flags & FIF_PROMISC_IN_BSS) && ar->monitor_enabled) { + ath10k_dbg(ATH10K_DBG_MAC, "mac monitor %d stop\n", + ar->monitor_vdev_id); + ret = ath10k_monitor_stop(ar); if (ret) ath10k_warn("Unable to stop monitor mode\n"); - else - ath10k_dbg(ATH10K_DBG_MAC, "Monitor mode stopped\n"); } mutex_unlock(&ar->conf_mutex); @@ -2143,41 +2154,41 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, WMI_VDEV_PARAM_BEACON_INTERVAL, arvif->beacon_interval); + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d beacon_interval %d\n", + arvif->vdev_id, arvif->beacon_interval); + if (ret) ath10k_warn("Failed to set beacon interval for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Beacon interval: %d set for VDEV: %d\n", - arvif->beacon_interval, arvif->vdev_id); } if (changed & BSS_CHANGED_BEACON) { + ath10k_dbg(ATH10K_DBG_MAC, + "vdev %d set beacon tx mode to staggered\n", + arvif->vdev_id); + ret = ath10k_wmi_pdev_set_param(ar, WMI_PDEV_PARAM_BEACON_TX_MODE, WMI_BEACON_STAGGERED_MODE); if (ret) ath10k_warn("Failed to set beacon mode for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Set staggered beacon mode for VDEV: %d\n", - arvif->vdev_id); } if (changed & BSS_CHANGED_BEACON_INFO) { arvif->dtim_period = info->dtim_period; + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d dtim_period %d\n", + arvif->vdev_id, arvif->dtim_period); + ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, WMI_VDEV_PARAM_DTIM_PERIOD, arvif->dtim_period); if (ret) ath10k_warn("Failed to set dtim period for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Set dtim period: %d for VDEV: %d\n", - arvif->dtim_period, arvif->vdev_id); } if (changed & BSS_CHANGED_SSID && @@ -2190,16 +2201,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, if (changed & BSS_CHANGED_BSSID) { if (!is_zero_ether_addr(info->bssid)) { + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d create peer %pM\n", + arvif->vdev_id, info->bssid); + ret = ath10k_peer_create(ar, arvif->vdev_id, info->bssid); if (ret) ath10k_warn("Failed to add peer: %pM for VDEV: %d\n", info->bssid, arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Added peer: %pM for VDEV: %d\n", - info->bssid, arvif->vdev_id); - if (vif->type == NL80211_IFTYPE_STATION) { /* @@ -2209,11 +2219,12 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, memcpy(arvif->u.sta.bssid, info->bssid, ETH_ALEN); + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d start %pM\n", + arvif->vdev_id, info->bssid); + + /* FIXME: check return value */ ret = ath10k_vdev_start(arvif); - if (!ret) - ath10k_dbg(ATH10K_DBG_MAC, - "VDEV: %d started with BSSID: %pM\n", - arvif->vdev_id, info->bssid); } /* @@ -2237,16 +2248,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, else cts_prot = 0; + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d cts_prot %d\n", + arvif->vdev_id, cts_prot); + ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, WMI_VDEV_PARAM_ENABLE_RTSCTS, cts_prot); if (ret) ath10k_warn("Failed to set CTS prot for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Set CTS prot: %d for VDEV: %d\n", - cts_prot, arvif->vdev_id); } if (changed & BSS_CHANGED_ERP_SLOT) { @@ -2257,16 +2267,15 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, else slottime = WMI_VDEV_SLOT_TIME_LONG; /* 20us */ + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d slot_time %d\n", + arvif->vdev_id, slottime); + ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, WMI_VDEV_PARAM_SLOT_TIME, slottime); if (ret) ath10k_warn("Failed to set erp slot for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Set slottime: %d for VDEV: %d\n", - slottime, arvif->vdev_id); } if (changed & BSS_CHANGED_ERP_PREAMBLE) { @@ -2276,16 +2285,16 @@ static void ath10k_bss_info_changed(struct ieee80211_hw *hw, else preamble = WMI_VDEV_PREAMBLE_LONG; + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d preamble %dn", + arvif->vdev_id, preamble); + ret = ath10k_wmi_vdev_set_param(ar, arvif->vdev_id, WMI_VDEV_PARAM_PREAMBLE, preamble); if (ret) ath10k_warn("Failed to set preamble for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Set preamble: %d for VDEV: %d\n", - preamble, arvif->vdev_id); } if (changed & BSS_CHANGED_ASSOC) { @@ -2476,27 +2485,26 @@ static int ath10k_sta_state(struct ieee80211_hw *hw, /* * New station addition. */ + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d peer create %pM (new sta)\n", + arvif->vdev_id, sta->addr); + ret = ath10k_peer_create(ar, arvif->vdev_id, sta->addr); if (ret) ath10k_warn("Failed to add peer: %pM for VDEV: %d\n", sta->addr, arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Added peer: %pM for VDEV: %d\n", - sta->addr, arvif->vdev_id); } else if ((old_state == IEEE80211_STA_NONE && new_state == IEEE80211_STA_NOTEXIST)) { /* * Existing station deletion. */ + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d peer delete %pM (sta gone)\n", + arvif->vdev_id, sta->addr); ret = ath10k_peer_delete(ar, arvif->vdev_id, sta->addr); if (ret) ath10k_warn("Failed to delete peer: %pM for VDEV: %d\n", sta->addr, arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Removed peer: %pM for VDEV: %d\n", - sta->addr, arvif->vdev_id); if (vif->type == NL80211_IFTYPE_STATION) ath10k_bss_disassoc(hw, vif); @@ -2507,14 +2515,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw, /* * New association. */ + ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM associated\n", + sta->addr); + ret = ath10k_station_assoc(ar, arvif, sta); if (ret) ath10k_warn("Failed to associate station: %pM\n", sta->addr); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Station %pM moved to assoc state\n", - sta->addr); } else if (old_state == IEEE80211_STA_ASSOC && new_state == IEEE80211_STA_AUTH && (vif->type == NL80211_IFTYPE_AP || @@ -2522,14 +2529,13 @@ static int ath10k_sta_state(struct ieee80211_hw *hw, /* * Disassociation. */ + ath10k_dbg(ATH10K_DBG_MAC, "mac sta %pM disassociated\n", + sta->addr); + ret = ath10k_station_disassoc(ar, arvif, sta); if (ret) ath10k_warn("Failed to disassociate station: %pM\n", sta->addr); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Station %pM moved to disassociated state\n", - sta->addr); } mutex_unlock(&ar->conf_mutex); @@ -2749,14 +2755,13 @@ static void ath10k_set_rts_iter(void *data, u8 *mac, struct ieee80211_vif *vif) if (ar_iter->ar->state == ATH10K_STATE_RESTARTED) return; + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d rts_threshold %d\n", + arvif->vdev_id, rts); + ar_iter->ret = ath10k_mac_set_rts(arvif, rts); if (ar_iter->ret) ath10k_warn("Failed to set RTS threshold for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Set RTS threshold: %d for VDEV: %d\n", - rts, arvif->vdev_id); } static int ath10k_set_rts_threshold(struct ieee80211_hw *hw, u32 value) @@ -2791,14 +2796,13 @@ static void ath10k_set_frag_iter(void *data, u8 *mac, struct ieee80211_vif *vif) if (ar_iter->ar->state == ATH10K_STATE_RESTARTED) return; + ath10k_dbg(ATH10K_DBG_MAC, "mac vdev %d fragmentation_threshold %d\n", + arvif->vdev_id, frag); + ar_iter->ret = ath10k_mac_set_frag(arvif, frag); if (ar_iter->ret) ath10k_warn("Failed to set frag threshold for VDEV: %d\n", arvif->vdev_id); - else - ath10k_dbg(ATH10K_DBG_MAC, - "Set frag threshold: %d for VDEV: %d\n", - frag, arvif->vdev_id); } static int ath10k_set_frag_threshold(struct ieee80211_hw *hw, u32 value) -- cgit v0.10.2 From 38a1d47ed5cf4b55f494be44940a1fda3281feab Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 17:56:14 +0300 Subject: ath10k: print phymode as a string Makes it easier to read debug logs. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index b8c81bb..2b11856 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -460,6 +460,11 @@ static int ath10k_vdev_start(struct ath10k_vif *arvif) arg.ssid_len = arvif->vif->bss_conf.ssid_len; } + ath10k_dbg(ATH10K_DBG_MAC, + "mac vdev %d start center_freq %d phymode %s\n", + arg.vdev_id, arg.channel.freq, + ath10k_wmi_phymode_str(arg.channel.mode)); + ret = ath10k_wmi_vdev_start(ar, &arg); if (ret) { ath10k_warn("WMI vdev start failed: ret %d\n", ret); @@ -1104,8 +1109,8 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, break; } - ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %d\n", - sta->addr, phymode); + ath10k_dbg(ATH10K_DBG_MAC, "mac peer %pM phymode %s\n", + sta->addr, ath10k_wmi_phymode_str(phymode)); arg->peer_phymode = phymode; WARN_ON(phymode == MODE_UNKNOWN); diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index 40fcf05..ab46582 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -508,6 +508,48 @@ enum wmi_phy_mode { MODE_MAX = 14 }; +static inline const char *ath10k_wmi_phymode_str(enum wmi_phy_mode mode) +{ + switch (mode) { + case MODE_11A: + return "11a"; + case MODE_11G: + return "11g"; + case MODE_11B: + return "11b"; + case MODE_11GONLY: + return "11gonly"; + case MODE_11NA_HT20: + return "11na-ht20"; + case MODE_11NG_HT20: + return "11ng-ht20"; + case MODE_11NA_HT40: + return "11na-ht40"; + case MODE_11NG_HT40: + return "11ng-ht40"; + case MODE_11AC_VHT20: + return "11ac-vht20"; + case MODE_11AC_VHT40: + return "11ac-vht40"; + case MODE_11AC_VHT80: + return "11ac-vht80"; + case MODE_11AC_VHT20_2G: + return "11ac-vht20-2g"; + case MODE_11AC_VHT40_2G: + return "11ac-vht40-2g"; + case MODE_11AC_VHT80_2G: + return "11ac-vht80-2g"; + case MODE_UNKNOWN: + /* skip */ + break; + + /* no default handler to allow compiler to check that the + * enum is fully handled */ + }; + + return ""; +} + #define WMI_CHAN_LIST_TAG 0x1 #define WMI_SSID_LIST_TAG 0x2 #define WMI_BSSID_LIST_TAG 0x3 -- cgit v0.10.2 From 7cc45e98e539ad98d8af57e4126aaac3e6b8f341 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Sun, 8 Sep 2013 18:19:55 +0300 Subject: ath10k: Calculate correct peer PHY mode for VHT The peer PHY mode for 11ac operation needs to be determined properly based on the channel bandwidth being used. Fix this so that the proper mode is given to the firmware. kvalo: earlier we used 11na-ht20 in STA mode for 11ac AP peer, this patch changes that to 11ac-vht80. I didn't notice any change in throughput in my tests, but nevertheless it's the right thing to do. Signed-off-by: Sujith Manoharan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 2b11856..8b9fb66 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1080,8 +1080,6 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, { enum wmi_phy_mode phymode = MODE_UNKNOWN; - /* FIXME: add VHT */ - switch (ar->hw->conf.chandef.chan->band) { case IEEE80211_BAND_2GHZ: if (sta->ht_cap.ht_supported) { @@ -1095,7 +1093,17 @@ static void ath10k_peer_assoc_h_phymode(struct ath10k *ar, break; case IEEE80211_BAND_5GHZ: - if (sta->ht_cap.ht_supported) { + /* + * Check VHT first. + */ + if (sta->vht_cap.vht_supported) { + if (sta->bandwidth == IEEE80211_STA_RX_BW_80) + phymode = MODE_11AC_VHT80; + else if (sta->bandwidth == IEEE80211_STA_RX_BW_40) + phymode = MODE_11AC_VHT40; + else if (sta->bandwidth == IEEE80211_STA_RX_BW_20) + phymode = MODE_11AC_VHT20; + } else if (sta->ht_cap.ht_supported) { if (sta->bandwidth == IEEE80211_STA_RX_BW_40) phymode = MODE_11NA_HT40; else -- cgit v0.10.2 From e9bb0aa39bce2f0a159c562c322c2d2746e6560d Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sun, 8 Sep 2013 18:36:11 +0300 Subject: ath10k: delete struct ce_sendlist struct ce_sendlist is useless as we always add just one buffer onto it. And most importantly, it's ugly as it doesn't use skb properly. Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/ce.c b/drivers/net/wireless/ath/ath10k/ce.c index 4f8373c..834e29e 100644 --- a/drivers/net/wireless/ath/ath10k/ce.c +++ b/drivers/net/wireless/ath/ath10k/ce.c @@ -338,33 +338,19 @@ int ath10k_ce_send(struct ath10k_ce_pipe *ce_state, return ret; } -void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist, u32 buffer, - unsigned int nbytes, u32 flags) -{ - unsigned int num_items = sendlist->num_items; - struct ce_sendlist_item *item; - - item = &sendlist->item[num_items]; - item->data = buffer; - item->u.nbytes = nbytes; - item->flags = flags; - sendlist->num_items++; -} - int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state, void *per_transfer_context, - struct ce_sendlist *sendlist, - unsigned int transfer_id) + unsigned int transfer_id, + u32 paddr, unsigned int nbytes, + u32 flags) { struct ath10k_ce_ring *src_ring = ce_state->src_ring; - struct ce_sendlist_item *item; struct ath10k *ar = ce_state->ar; struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); unsigned int nentries_mask = src_ring->nentries_mask; - unsigned int num_items = sendlist->num_items; unsigned int sw_index; unsigned int write_index; - int i, delta, ret = -ENOMEM; + int delta, ret = -ENOMEM; spin_lock_bh(&ar_pci->ce_lock); @@ -373,30 +359,12 @@ int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state, delta = CE_RING_DELTA(nentries_mask, write_index, sw_index - 1); - if (delta >= num_items) { - /* - * Handle all but the last item uniformly. - */ - for (i = 0; i < num_items - 1; i++) { - item = &sendlist->item[i]; - ret = ath10k_ce_send_nolock(ce_state, - CE_SENDLIST_ITEM_CTXT, - (u32) item->data, - item->u.nbytes, transfer_id, - item->flags | - CE_SEND_FLAG_GATHER); - if (ret) - ath10k_warn("CE send failed for item: %d\n", i); - } - /* - * Provide valid context pointer for final item. - */ - item = &sendlist->item[i]; + if (delta >= 1) { ret = ath10k_ce_send_nolock(ce_state, per_transfer_context, - (u32) item->data, item->u.nbytes, - transfer_id, item->flags); + paddr, nbytes, + transfer_id, flags); if (ret) - ath10k_warn("CE send failed for last item: %d\n", i); + ath10k_warn("CE send failed: %d\n", ret); } spin_unlock_bh(&ar_pci->ce_lock); diff --git a/drivers/net/wireless/ath/ath10k/ce.h b/drivers/net/wireless/ath/ath10k/ce.h index fb22361..aec8028 100644 --- a/drivers/net/wireless/ath/ath10k/ce.h +++ b/drivers/net/wireless/ath/ath10k/ce.h @@ -27,7 +27,6 @@ /* Descriptor rings must be aligned to this boundary */ #define CE_DESC_RING_ALIGN 8 -#define CE_SENDLIST_ITEMS_MAX 12 #define CE_SEND_FLAG_GATHER 0x00010000 /* @@ -124,24 +123,6 @@ struct ath10k_ce_pipe { struct ath10k_ce_ring *dest_ring; }; -struct ce_sendlist_item { - /* e.g. buffer or desc list */ - dma_addr_t data; - union { - /* simple buffer */ - unsigned int nbytes; - /* Rx descriptor list */ - unsigned int ndesc; - } u; - /* externally-specified flags; OR-ed with internal flags */ - u32 flags; -}; - -struct ce_sendlist { - unsigned int num_items; - struct ce_sendlist_item item[CE_SENDLIST_ITEMS_MAX]; -}; - /* Copy Engine settable attributes */ struct ce_attr; @@ -175,13 +156,6 @@ void ath10k_ce_send_cb_register(struct ath10k_ce_pipe *ce_state, void (*send_cb)(struct ath10k_ce_pipe *), int disable_interrupts); -/* Append a simple buffer (address/length) to a sendlist. */ -void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist, - u32 buffer, - unsigned int nbytes, - /* OR-ed with internal flags */ - u32 flags); - /* * Queue a "sendlist" of buffers to be sent using gather to a single * anonymous destination buffer @@ -193,10 +167,10 @@ void ath10k_ce_sendlist_buf_add(struct ce_sendlist *sendlist, * Implemenation note: Pushes multiple buffers with Gather to Source ring. */ int ath10k_ce_sendlist_send(struct ath10k_ce_pipe *ce_state, - void *per_transfer_send_context, - struct ce_sendlist *sendlist, - /* 14 bits */ - unsigned int transfer_id); + void *per_transfer_context, + unsigned int transfer_id, + u32 paddr, unsigned int nbytes, + u32 flags); /*==================Recv=======================*/ @@ -307,16 +281,6 @@ struct ce_attr { unsigned int dest_nentries; }; -/* - * When using sendlist_send to transfer multiple buffer fragments, the - * transfer context of each fragment, except last one, will be filled - * with CE_SENDLIST_ITEM_CTXT. ce_completed_send will return success for - * each fragment done with send and the transfer context would be - * CE_SENDLIST_ITEM_CTXT. Upper layer could use this to identify the - * status of a send completion. - */ -#define CE_SENDLIST_ITEM_CTXT ((void *)0xcecebeef) - #define SR_BA_ADDRESS 0x0000 #define SR_SIZE_ADDRESS 0x0004 #define DR_BA_ADDRESS 0x0008 diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 899a8c0..ecaf213 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -626,17 +626,9 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state) while (ath10k_ce_completed_send_next(ce_state, &transfer_context, &ce_data, &nbytes, &transfer_id) == 0) { - /* - * For the send completion of an item in sendlist, just - * increment num_sends_allowed. The upper layer callback will - * be triggered when last fragment is done with send. - */ - if (transfer_context == CE_SENDLIST_ITEM_CTXT) { - spin_lock_bh(&pipe_info->pipe_lock); - pipe_info->num_sends_allowed++; - spin_unlock_bh(&pipe_info->pipe_lock); - continue; - } + spin_lock_bh(&pipe_info->pipe_lock); + pipe_info->num_sends_allowed++; + spin_unlock_bh(&pipe_info->pipe_lock); compl = get_free_compl(pipe_info); if (!compl) @@ -714,13 +706,10 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id, struct ath10k_pci *ar_pci = ath10k_pci_priv(ar); struct ath10k_pci_pipe *pipe_info = &(ar_pci->pipe_info[pipe_id]); struct ath10k_ce_pipe *ce_hdl = pipe_info->ce_hdl; - struct ce_sendlist sendlist; unsigned int len; u32 flags = 0; int ret; - memset(&sendlist, 0, sizeof(struct ce_sendlist)); - len = min(bytes, nbuf->len); bytes -= len; @@ -735,8 +724,6 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id, "ath10k tx: data: ", nbuf->data, nbuf->len); - ath10k_ce_sendlist_buf_add(&sendlist, skb_cb->paddr, len, flags); - /* Make sure we have resources to handle this request */ spin_lock_bh(&pipe_info->pipe_lock); if (!pipe_info->num_sends_allowed) { @@ -747,7 +734,8 @@ static int ath10k_pci_hif_send_head(struct ath10k *ar, u8 pipe_id, pipe_info->num_sends_allowed--; spin_unlock_bh(&pipe_info->pipe_lock); - ret = ath10k_ce_sendlist_send(ce_hdl, nbuf, &sendlist, transfer_id); + ret = ath10k_ce_sendlist_send(ce_hdl, nbuf, transfer_id, + skb_cb->paddr, len, flags); if (ret) ath10k_warn("CE send failed: %p\n", nbuf); @@ -1302,16 +1290,14 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pipe_info) while (ath10k_ce_cancel_send_next(ce_hdl, (void **)&netbuf, &ce_data, &nbytes, &id) == 0) { - if (netbuf != CE_SENDLIST_ITEM_CTXT) { - /* - * Indicate the completion to higer layer to free - * the buffer - */ - ATH10K_SKB_CB(netbuf)->is_aborted = true; - ar_pci->msg_callbacks_current.tx_completion(ar, - netbuf, - id); - } + /* + * Indicate the completion to higer layer to free + * the buffer + */ + ATH10K_SKB_CB(netbuf)->is_aborted = true; + ar_pci->msg_callbacks_current.tx_completion(ar, + netbuf, + id); } } -- cgit v0.10.2 From 3699ddc55fc1d1689a411ada9d74e584f7987f46 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:25:11 +0900 Subject: wireless: ath10k: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index ecaf213..f1faf46 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2501,7 +2501,6 @@ err_region: err_device: pci_disable_device(pdev); err_ar: - pci_set_drvdata(pdev, NULL); ath10k_core_destroy(ar); err_ar_pci: /* call HIF PCI free here */ @@ -2529,7 +2528,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev) ath10k_core_unregister(ar); - pci_set_drvdata(pdev, NULL); pci_iounmap(pdev, ar_pci->mem); pci_release_region(pdev, BAR_NUM); pci_clear_master(pdev); -- cgit v0.10.2 From eeed3765f327755b499c81eaf453e9d52a27c01c Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Sep 2013 14:16:52 +0200 Subject: ath10k: simplify HTC credits calculation Credit calculation was overly complex unnecessarily. Now skb dequeing is more unified. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index f03fd8d..1da0f82 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -167,49 +167,6 @@ err: return ret; } -static struct sk_buff *ath10k_htc_get_skb_credit_based(struct ath10k_htc *htc, - struct ath10k_htc_ep *ep, - u8 *credits) -{ - struct sk_buff *skb; - struct ath10k_skb_cb *skb_cb; - int credits_required; - int remainder; - unsigned int transfer_len; - - lockdep_assert_held(&htc->tx_lock); - - skb = __skb_dequeue(&ep->tx_queue); - if (!skb) - return NULL; - - skb_cb = ATH10K_SKB_CB(skb); - transfer_len = skb->len; - - if (likely(transfer_len <= htc->target_credit_size)) { - credits_required = 1; - } else { - /* figure out how many credits this message requires */ - credits_required = transfer_len / htc->target_credit_size; - remainder = transfer_len % htc->target_credit_size; - - if (remainder) - credits_required++; - } - - ath10k_dbg(ATH10K_DBG_HTC, "Credits required %d got %d\n", - credits_required, ep->tx_credits); - - if (ep->tx_credits < credits_required) { - __skb_queue_head(&ep->tx_queue, skb); - return NULL; - } - - ep->tx_credits -= credits_required; - *credits = credits_required; - return skb; -} - static void ath10k_htc_send_work(struct work_struct *work) { struct ath10k_htc_ep *ep = container_of(work, @@ -224,11 +181,16 @@ static void ath10k_htc_send_work(struct work_struct *work) ath10k_htc_send_complete_check(ep, 0); spin_lock_bh(&htc->tx_lock); - if (ep->tx_credit_flow_enabled) - skb = ath10k_htc_get_skb_credit_based(htc, ep, - &credits); - else - skb = __skb_dequeue(&ep->tx_queue); + skb = __skb_dequeue(&ep->tx_queue); + + if (ep->tx_credit_flow_enabled) { + credits = DIV_ROUND_UP(skb->len, + htc->target_credit_size); + if (ep->tx_credits < credits) { + __skb_queue_head(&ep->tx_queue, skb); + skb = NULL; + } + } spin_unlock_bh(&htc->tx_lock); if (!skb) -- cgit v0.10.2 From 88e65fc33752f54dfbabc766de15f3be6989f1d1 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Sep 2013 14:16:53 +0200 Subject: ath10k: add HTC TX credits replenishing notification This will allow higher layers to anticipate and act upon TX credits renewal. This will be important for some future rework of WMI command submission. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index 1da0f82..49da4e5 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -150,6 +150,9 @@ err: ep->tx_credits += credits; spin_unlock_bh(&htc->tx_lock); + if (ep->ep_ops.ep_tx_credits) + ep->ep_ops.ep_tx_credits(htc->ar); + /* this is the simplest way to handle out-of-resources for non-credit * based endpoints. credit based endpoints can still get -ENOSR, but * this is highly unlikely as credit reservation should prevent that */ @@ -302,6 +305,12 @@ ath10k_htc_process_credit_report(struct ath10k_htc *htc, ep = &htc->endpoint[report->eid]; ep->tx_credits += report->credits; + if (ep->ep_ops.ep_tx_credits) { + spin_unlock_bh(&htc->tx_lock); + ep->ep_ops.ep_tx_credits(htc->ar); + spin_lock_bh(&htc->tx_lock); + } + if (ep->tx_credits && !skb_queue_empty(&ep->tx_queue)) queue_work(htc->ar->workqueue, &ep->send_work); } diff --git a/drivers/net/wireless/ath/ath10k/htc.h b/drivers/net/wireless/ath/ath10k/htc.h index e1dd8c7..92ca29b 100644 --- a/drivers/net/wireless/ath/ath10k/htc.h +++ b/drivers/net/wireless/ath/ath10k/htc.h @@ -276,6 +276,7 @@ struct ath10k_htc_ops { struct ath10k_htc_ep_ops { void (*ep_tx_complete)(struct ath10k *, struct sk_buff *); void (*ep_rx_complete)(struct ath10k *, struct sk_buff *); + void (*ep_tx_credits)(struct ath10k *); }; /* service connection information */ -- cgit v0.10.2 From be8b39439009579a4569598539ea97e227f99d98 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Sep 2013 14:16:54 +0200 Subject: ath10k: make WMI commands block by design This will be necessary for further changes in command submission scheme. Once HTC is cleaned up WMI commands will finally block. This requires for SWBA to be processed in a non-atomic context for now. Once other necessary changes are in this will be reverted. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 22b17d6..c953a33 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -114,6 +114,7 @@ struct ath10k_wmi { struct completion unified_ready; atomic_t pending_tx_count; wait_queue_head_t wq; + wait_queue_head_t tx_credits_wq; struct sk_buff_head wmi_event_list; struct work_struct wmi_event_work; diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h index bf1ceb8..fd53130 100644 --- a/drivers/net/wireless/ath/ath10k/trace.h +++ b/drivers/net/wireless/ath/ath10k/trace.h @@ -111,26 +111,29 @@ TRACE_EVENT(ath10k_log_dbg_dump, ); TRACE_EVENT(ath10k_wmi_cmd, - TP_PROTO(int id, void *buf, size_t buf_len), + TP_PROTO(int id, void *buf, size_t buf_len, int ret), - TP_ARGS(id, buf, buf_len), + TP_ARGS(id, buf, buf_len, ret), TP_STRUCT__entry( __field(unsigned int, id) __field(size_t, buf_len) __dynamic_array(u8, buf, buf_len) + __field(int ret) ), TP_fast_assign( __entry->id = id; __entry->buf_len = buf_len; + __entry->ret = ret; memcpy(__get_dynamic_array(buf), buf, buf_len); ), TP_printk( - "id %d len %zu", + "id %d len %zu ret %d", __entry->id, - __entry->buf_len + __entry->buf_len, + __entry->ret ) ); diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 32fd5e7..66cd892 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -90,13 +90,12 @@ static void ath10k_wmi_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb) wake_up(&ar->wmi.wq); } -/* WMI command API */ -static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, - enum wmi_cmd_id cmd_id) +static int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, + enum wmi_cmd_id cmd_id) { struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb); struct wmi_cmd_hdr *cmd_hdr; - int status; + int ret; u32 cmd = 0; if (skb_push(skb, sizeof(struct wmi_cmd_hdr)) == NULL) @@ -107,26 +106,40 @@ static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, cmd_hdr = (struct wmi_cmd_hdr *)skb->data; cmd_hdr->cmd_id = __cpu_to_le32(cmd); - if (atomic_add_return(1, &ar->wmi.pending_tx_count) > - WMI_MAX_PENDING_TX_COUNT) { - /* avoid using up memory when FW hangs */ - dev_kfree_skb(skb); - atomic_dec(&ar->wmi.pending_tx_count); - return -EBUSY; - } - memset(skb_cb, 0, sizeof(*skb_cb)); + ret = ath10k_htc_send(&ar->htc, ar->wmi.eid, skb); + trace_ath10k_wmi_cmd(cmd_id, skb->data, skb->len, ret); - trace_ath10k_wmi_cmd(cmd_id, skb->data, skb->len); + if (ret) + goto err_pull; - status = ath10k_htc_send(&ar->htc, ar->wmi.eid, skb); - if (status) { + return 0; + +err_pull: + skb_pull(skb, sizeof(struct wmi_cmd_hdr)); + return ret; +} + +static void ath10k_wmi_op_ep_tx_credits(struct ath10k *ar, + enum ath10k_htc_ep_id eid) +{ + wake_up(&ar->wmi.tx_credits_wq); +} + +static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, + enum wmi_cmd_id cmd_id) +{ + int ret = -EINVAL; + + wait_event_timeout(ar->wmi.tx_credits_wq, ({ + ret = ath10k_wmi_cmd_send_nowait(ar, skb, cmd_id); + (ret != -EAGAIN); + }), 3*HZ); + + if (ret) dev_kfree_skb_any(skb); - atomic_dec(&ar->wmi.pending_tx_count); - return status; - } - return 0; + return ret; } static int ath10k_wmi_event_scan(struct ath10k *ar, struct sk_buff *skb) @@ -1168,7 +1181,6 @@ static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb) /* some events require to be handled ASAP * thus can't be defered to a worker thread */ switch (event_id) { - case WMI_HOST_SWBA_EVENTID: case WMI_MGMT_RX_EVENTID: ath10k_wmi_event_process(ar, skb); return; @@ -1186,6 +1198,7 @@ int ath10k_wmi_attach(struct ath10k *ar) init_completion(&ar->wmi.service_ready); init_completion(&ar->wmi.unified_ready); init_waitqueue_head(&ar->wmi.wq); + init_waitqueue_head(&ar->wmi.tx_credits_wq); skb_queue_head_init(&ar->wmi.wmi_event_list); INIT_WORK(&ar->wmi.wmi_event_work, ath10k_wmi_event_work); @@ -1215,6 +1228,7 @@ int ath10k_wmi_connect_htc_service(struct ath10k *ar) /* these fields are the same for all service endpoints */ conn_req.ep_ops.ep_tx_complete = ath10k_wmi_htc_tx_complete; conn_req.ep_ops.ep_rx_complete = ath10k_wmi_process_rx; + conn_req.ep_ops.ep_tx_credits = ath10k_wmi_op_ep_tx_credits; /* connect to control service */ conn_req.service_id = ATH10K_HTC_SVC_ID_WMI_CONTROL; -- cgit v0.10.2 From 12acbc43c1c302022984bf0af89ac5f0a24b133a Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Sep 2013 14:16:55 +0200 Subject: ath10k: simplify HTC command submitting The patch removes HTC endpoint tx workers in favour of direct command submission. This makes a lot more sense for data path. mac80211 queues are effectively stopped/woken up in a more timely fashion preventing build up of frames. It's possible to push more traffic than the device/system is able to handle and have no hiccups or performance degradation with UDP traffic. WMI commands will now report errors properly and possibly block as they actively can wait for tx credits to become available. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index 49da4e5..d0d7212 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -117,99 +117,13 @@ static void ath10k_htc_prepare_tx_skb(struct ath10k_htc_ep *ep, spin_unlock_bh(&ep->htc->tx_lock); } -static int ath10k_htc_issue_skb(struct ath10k_htc *htc, - struct ath10k_htc_ep *ep, - struct sk_buff *skb, - u8 credits) -{ - struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb); - int ret; - - ath10k_dbg(ATH10K_DBG_HTC, "%s: ep %d skb %p\n", __func__, - ep->eid, skb); - - ath10k_htc_prepare_tx_skb(ep, skb); - - ret = ath10k_skb_map(htc->ar->dev, skb); - if (ret) - goto err; - - ret = ath10k_hif_send_head(htc->ar, - ep->ul_pipe_id, - ep->eid, - skb->len, - skb); - if (unlikely(ret)) - goto err; - - return 0; -err: - ath10k_warn("HTC issue failed: %d\n", ret); - - spin_lock_bh(&htc->tx_lock); - ep->tx_credits += credits; - spin_unlock_bh(&htc->tx_lock); - - if (ep->ep_ops.ep_tx_credits) - ep->ep_ops.ep_tx_credits(htc->ar); - - /* this is the simplest way to handle out-of-resources for non-credit - * based endpoints. credit based endpoints can still get -ENOSR, but - * this is highly unlikely as credit reservation should prevent that */ - if (ret == -ENOSR) { - spin_lock_bh(&htc->tx_lock); - __skb_queue_head(&ep->tx_queue, skb); - spin_unlock_bh(&htc->tx_lock); - - return ret; - } - - skb_cb->is_aborted = true; - ath10k_htc_notify_tx_completion(ep, skb); - - return ret; -} - -static void ath10k_htc_send_work(struct work_struct *work) -{ - struct ath10k_htc_ep *ep = container_of(work, - struct ath10k_htc_ep, send_work); - struct ath10k_htc *htc = ep->htc; - struct sk_buff *skb; - u8 credits = 0; - int ret; - - while (true) { - if (ep->ul_is_polled) - ath10k_htc_send_complete_check(ep, 0); - - spin_lock_bh(&htc->tx_lock); - skb = __skb_dequeue(&ep->tx_queue); - - if (ep->tx_credit_flow_enabled) { - credits = DIV_ROUND_UP(skb->len, - htc->target_credit_size); - if (ep->tx_credits < credits) { - __skb_queue_head(&ep->tx_queue, skb); - skb = NULL; - } - } - spin_unlock_bh(&htc->tx_lock); - - if (!skb) - break; - - ret = ath10k_htc_issue_skb(htc, ep, skb, credits); - if (ret == -ENOSR) - break; - } -} - int ath10k_htc_send(struct ath10k_htc *htc, enum ath10k_htc_ep_id eid, struct sk_buff *skb) { struct ath10k_htc_ep *ep = &htc->endpoint[eid]; + int credits = 0; + int ret; if (htc->ar->state == ATH10K_STATE_WEDGED) return -ECOMM; @@ -219,18 +133,55 @@ int ath10k_htc_send(struct ath10k_htc *htc, return -ENOENT; } + /* FIXME: This looks ugly, can we fix it? */ spin_lock_bh(&htc->tx_lock); if (htc->stopped) { spin_unlock_bh(&htc->tx_lock); return -ESHUTDOWN; } + spin_unlock_bh(&htc->tx_lock); - __skb_queue_tail(&ep->tx_queue, skb); skb_push(skb, sizeof(struct ath10k_htc_hdr)); - spin_unlock_bh(&htc->tx_lock); - queue_work(htc->ar->workqueue, &ep->send_work); + if (ep->tx_credit_flow_enabled) { + credits = DIV_ROUND_UP(skb->len, htc->target_credit_size); + spin_lock_bh(&htc->tx_lock); + if (ep->tx_credits < credits) { + spin_unlock_bh(&htc->tx_lock); + ret = -EAGAIN; + goto err_pull; + } + ep->tx_credits -= credits; + spin_unlock_bh(&htc->tx_lock); + } + + ath10k_htc_prepare_tx_skb(ep, skb); + + ret = ath10k_skb_map(htc->ar->dev, skb); + if (ret) + goto err_credits; + + ret = ath10k_hif_send_head(htc->ar, ep->ul_pipe_id, ep->eid, + skb->len, skb); + if (ret) + goto err_unmap; + return 0; + +err_unmap: + ath10k_skb_unmap(htc->ar->dev, skb); +err_credits: + if (ep->tx_credit_flow_enabled) { + spin_lock_bh(&htc->tx_lock); + ep->tx_credits += credits; + spin_unlock_bh(&htc->tx_lock); + + if (ep->ep_ops.ep_tx_credits) + ep->ep_ops.ep_tx_credits(htc->ar); + } +err_pull: + skb_pull(skb, sizeof(struct ath10k_htc_hdr)); + return ret; } static int ath10k_htc_tx_completion_handler(struct ath10k *ar, @@ -243,39 +194,9 @@ static int ath10k_htc_tx_completion_handler(struct ath10k *ar, ath10k_htc_notify_tx_completion(ep, skb); /* the skb now belongs to the completion handler */ - /* note: when using TX credit flow, the re-checking of queues happens - * when credits flow back from the target. in the non-TX credit case, - * we recheck after the packet completes */ - spin_lock_bh(&htc->tx_lock); - if (!ep->tx_credit_flow_enabled && !htc->stopped) - queue_work(ar->workqueue, &ep->send_work); - spin_unlock_bh(&htc->tx_lock); - return 0; } -/* flush endpoint TX queue */ -static void ath10k_htc_flush_endpoint_tx(struct ath10k_htc *htc, - struct ath10k_htc_ep *ep) -{ - struct sk_buff *skb; - struct ath10k_skb_cb *skb_cb; - - spin_lock_bh(&htc->tx_lock); - for (;;) { - skb = __skb_dequeue(&ep->tx_queue); - if (!skb) - break; - - skb_cb = ATH10K_SKB_CB(skb); - skb_cb->is_aborted = true; - ath10k_htc_notify_tx_completion(ep, skb); - } - spin_unlock_bh(&htc->tx_lock); - - cancel_work_sync(&ep->send_work); -} - /***********/ /* Receive */ /***********/ @@ -310,9 +231,6 @@ ath10k_htc_process_credit_report(struct ath10k_htc *htc, ep->ep_ops.ep_tx_credits(htc->ar); spin_lock_bh(&htc->tx_lock); } - - if (ep->tx_credits && !skb_queue_empty(&ep->tx_queue)) - queue_work(htc->ar->workqueue, &ep->send_work); } spin_unlock_bh(&htc->tx_lock); } @@ -570,10 +488,8 @@ static void ath10k_htc_reset_endpoint_states(struct ath10k_htc *htc) ep->max_ep_message_len = 0; ep->max_tx_queue_depth = 0; ep->eid = i; - skb_queue_head_init(&ep->tx_queue); ep->htc = htc; ep->tx_credit_flow_enabled = true; - INIT_WORK(&ep->send_work, ath10k_htc_send_work); } } @@ -916,18 +832,10 @@ int ath10k_htc_start(struct ath10k_htc *htc) */ void ath10k_htc_stop(struct ath10k_htc *htc) { - int i; - struct ath10k_htc_ep *ep; - spin_lock_bh(&htc->tx_lock); htc->stopped = true; spin_unlock_bh(&htc->tx_lock); - for (i = ATH10K_HTC_EP_0; i < ATH10K_HTC_EP_COUNT; i++) { - ep = &htc->endpoint[i]; - ath10k_htc_flush_endpoint_tx(htc, ep); - } - ath10k_hif_stop(htc->ar); } diff --git a/drivers/net/wireless/ath/ath10k/htc.h b/drivers/net/wireless/ath/ath10k/htc.h index 92ca29b..4716d33 100644 --- a/drivers/net/wireless/ath/ath10k/htc.h +++ b/drivers/net/wireless/ath/ath10k/htc.h @@ -316,15 +316,11 @@ struct ath10k_htc_ep { int ul_is_polled; /* call HIF to get tx completions */ int dl_is_polled; /* call HIF to fetch rx (not implemented) */ - struct sk_buff_head tx_queue; - u8 seq_no; /* for debugging */ int tx_credits; int tx_credit_size; int tx_credits_per_max_message; bool tx_credit_flow_enabled; - - struct work_struct send_work; }; struct ath10k_htc_svc_tx_credits { diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 66cd892..ff407c2 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -120,8 +120,7 @@ err_pull: return ret; } -static void ath10k_wmi_op_ep_tx_credits(struct ath10k *ar, - enum ath10k_htc_ep_id eid) +static void ath10k_wmi_op_ep_tx_credits(struct ath10k *ar) { wake_up(&ar->wmi.tx_credits_wq); } -- cgit v0.10.2 From ed54388a38d817dce7fe22e7dc80fc13b1a6838e Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Sep 2013 14:16:56 +0200 Subject: ath10k: improve beacon submission latency The patch prevents beacon misses in some case of heavy load on a system. If a beacon can't be transmitted directly from an SWBA event it will be left in arvif->beacon and transmission will be retried once TX credits become available. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index c953a33..14b7d3d 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -204,6 +204,7 @@ struct ath10k_vif { enum wmi_vdev_subtype vdev_subtype; u32 beacon_interval; u32 dtim_period; + struct sk_buff *beacon; struct ath10k *ar; struct ieee80211_vif *vif; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 8b9fb66..6c3e9d1 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2075,6 +2075,13 @@ static void ath10k_remove_interface(struct ieee80211_hw *hw, mutex_lock(&ar->conf_mutex); + spin_lock_bh(&ar->data_lock); + if (arvif->beacon) { + dev_kfree_skb_any(arvif->beacon); + arvif->beacon = NULL; + } + spin_unlock_bh(&ar->data_lock); + ar->free_vdev_map |= 1 << (arvif->vdev_id); if (arvif->vdev_type == WMI_VDEV_TYPE_AP) { diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index ff407c2..9152dae 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -120,8 +120,53 @@ err_pull: return ret; } +static void ath10k_wmi_tx_beacon_nowait(struct ath10k_vif *arvif) +{ + struct wmi_bcn_tx_arg arg = {0}; + int ret; + + lockdep_assert_held(&arvif->ar->data_lock); + + if (arvif->beacon == NULL) + return; + + arg.vdev_id = arvif->vdev_id; + arg.tx_rate = 0; + arg.tx_power = 0; + arg.bcn = arvif->beacon->data; + arg.bcn_len = arvif->beacon->len; + + ret = ath10k_wmi_beacon_send_nowait(arvif->ar, &arg); + if (ret) + return; + + dev_kfree_skb_any(arvif->beacon); + arvif->beacon = NULL; +} + +static void ath10k_wmi_tx_beacons_iter(void *data, u8 *mac, + struct ieee80211_vif *vif) +{ + struct ath10k_vif *arvif = ath10k_vif_to_arvif(vif); + + ath10k_wmi_tx_beacon_nowait(arvif); +} + +static void ath10k_wmi_tx_beacons_nowait(struct ath10k *ar) +{ + spin_lock_bh(&ar->data_lock); + ieee80211_iterate_active_interfaces_atomic(ar->hw, + IEEE80211_IFACE_ITER_NORMAL, + ath10k_wmi_tx_beacons_iter, + NULL); + spin_unlock_bh(&ar->data_lock); +} + static void ath10k_wmi_op_ep_tx_credits(struct ath10k *ar) { + /* try to send pending beacons first. they take priority */ + ath10k_wmi_tx_beacons_nowait(ar); + wake_up(&ar->wmi.tx_credits_wq); } @@ -131,6 +176,9 @@ static int ath10k_wmi_cmd_send(struct ath10k *ar, struct sk_buff *skb, int ret = -EINVAL; wait_event_timeout(ar->wmi.tx_credits_wq, ({ + /* try to send pending beacons first. they take priority */ + ath10k_wmi_tx_beacons_nowait(ar); + ret = ath10k_wmi_cmd_send_nowait(ar, skb, cmd_id); (ret != -EAGAIN); }), 3*HZ); @@ -760,10 +808,8 @@ static void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb) int i = -1; struct wmi_bcn_info *bcn_info; struct ath10k_vif *arvif; - struct wmi_bcn_tx_arg arg; struct sk_buff *bcn; int vdev_id = 0; - int ret; ath10k_dbg(ATH10K_DBG_MGMT, "WMI_HOST_SWBA_EVENTID\n"); @@ -820,17 +866,17 @@ static void ath10k_wmi_event_host_swba(struct ath10k *ar, struct sk_buff *skb) ath10k_wmi_update_tim(ar, arvif, bcn, bcn_info); ath10k_wmi_update_noa(ar, arvif, bcn, bcn_info); - arg.vdev_id = arvif->vdev_id; - arg.tx_rate = 0; - arg.tx_power = 0; - arg.bcn = bcn->data; - arg.bcn_len = bcn->len; + spin_lock_bh(&ar->data_lock); + if (arvif->beacon) { + ath10k_warn("SWBA overrun on vdev %d\n", + arvif->vdev_id); + dev_kfree_skb_any(arvif->beacon); + } - ret = ath10k_wmi_beacon_send(ar, &arg); - if (ret) - ath10k_warn("could not send beacon (%d)\n", ret); + arvif->beacon = bcn; - dev_kfree_skb_any(bcn); + ath10k_wmi_tx_beacon_nowait(arvif); + spin_unlock_bh(&ar->data_lock); } } @@ -1181,6 +1227,7 @@ static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb) * thus can't be defered to a worker thread */ switch (event_id) { case WMI_MGMT_RX_EVENTID: + case WMI_HOST_SWBA_EVENTID: ath10k_wmi_event_process(ar, skb); return; default: @@ -2138,7 +2185,8 @@ int ath10k_wmi_peer_assoc(struct ath10k *ar, return ath10k_wmi_cmd_send(ar, skb, WMI_PEER_ASSOC_CMDID); } -int ath10k_wmi_beacon_send(struct ath10k *ar, const struct wmi_bcn_tx_arg *arg) +int ath10k_wmi_beacon_send_nowait(struct ath10k *ar, + const struct wmi_bcn_tx_arg *arg) { struct wmi_bcn_tx_cmd *cmd; struct sk_buff *skb; @@ -2154,7 +2202,7 @@ int ath10k_wmi_beacon_send(struct ath10k *ar, const struct wmi_bcn_tx_arg *arg) cmd->hdr.bcn_len = __cpu_to_le32(arg->bcn_len); memcpy(cmd->bcn, arg->bcn, arg->bcn_len); - return ath10k_wmi_cmd_send(ar, skb, WMI_BCN_TX_CMDID); + return ath10k_wmi_cmd_send_nowait(ar, skb, WMI_BCN_TX_CMDID); } static void ath10k_wmi_pdev_set_wmm_param(struct wmi_wmm_params *params, diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index ab46582..b100431 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -3110,7 +3110,8 @@ int ath10k_wmi_set_ap_ps_param(struct ath10k *ar, u32 vdev_id, const u8 *mac, enum wmi_ap_ps_peer_param param_id, u32 value); int ath10k_wmi_scan_chan_list(struct ath10k *ar, const struct wmi_scan_chan_list_arg *arg); -int ath10k_wmi_beacon_send(struct ath10k *ar, const struct wmi_bcn_tx_arg *arg); +int ath10k_wmi_beacon_send_nowait(struct ath10k *ar, + const struct wmi_bcn_tx_arg *arg); int ath10k_wmi_pdev_set_wmm_params(struct ath10k *ar, const struct wmi_pdev_set_wmm_params_arg *arg); int ath10k_wmi_request_stats(struct ath10k *ar, enum wmi_stats_id stats_id); -- cgit v0.10.2 From 7cc23016366e183dcaf23afa4a0dca61ff7f787a Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Sep 2013 14:16:57 +0200 Subject: ath10k: remove wmi pending count limit It is no longer used nor necessary since WMI commands can block. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 14b7d3d..c2b6a76 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -112,8 +112,6 @@ struct ath10k_wmi { enum ath10k_htc_ep_id eid; struct completion service_ready; struct completion unified_ready; - atomic_t pending_tx_count; - wait_queue_head_t wq; wait_queue_head_t tx_credits_wq; struct sk_buff_head wmi_event_list; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 6c3e9d1..11aa13e 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1224,8 +1224,6 @@ static void ath10k_bss_disassoc(struct ieee80211_hw *hw, /* FIXME: why don't we print error if wmi call fails? */ ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id); - ath10k_wmi_flush_tx(ar); - arvif->def_wep_key_index = 0; } @@ -1664,8 +1662,6 @@ static int ath10k_abort_scan(struct ath10k *ar) return -EIO; } - ath10k_wmi_flush_tx(ar); - ret = wait_for_completion_timeout(&ar->scan.completed, 3*HZ); if (ret == 0) ath10k_warn("timed out while waiting for scan to stop\n"); @@ -1699,10 +1695,6 @@ static int ath10k_start_scan(struct ath10k *ar, if (ret) return ret; - /* make sure we submit the command so the completion - * timeout makes sense */ - ath10k_wmi_flush_tx(ar); - ret = wait_for_completion_timeout(&ar->scan.started, 1*HZ); if (ret == 0) { ath10k_abort_scan(ar); @@ -1924,7 +1916,6 @@ static int ath10k_config(struct ieee80211_hw *hw, u32 changed) ret = ath10k_monitor_destroy(ar); } - ath10k_wmi_flush_tx(ar); mutex_unlock(&ar->conf_mutex); return ret; } diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 9152dae..b29d2b9 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -23,30 +23,6 @@ #include "wmi.h" #include "mac.h" -void ath10k_wmi_flush_tx(struct ath10k *ar) -{ - int ret; - - lockdep_assert_held(&ar->conf_mutex); - - if (ar->state == ATH10K_STATE_WEDGED) { - ath10k_warn("wmi flush skipped - device is wedged anyway\n"); - return; - } - - ret = wait_event_timeout(ar->wmi.wq, - atomic_read(&ar->wmi.pending_tx_count) == 0, - 5*HZ); - if (atomic_read(&ar->wmi.pending_tx_count) == 0) - return; - - if (ret == 0) - ret = -ETIMEDOUT; - - if (ret < 0) - ath10k_warn("wmi flush failed (%d)\n", ret); -} - int ath10k_wmi_wait_for_service_ready(struct ath10k *ar) { int ret; @@ -85,9 +61,6 @@ static struct sk_buff *ath10k_wmi_alloc_skb(u32 len) static void ath10k_wmi_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb) { dev_kfree_skb(skb); - - if (atomic_sub_return(1, &ar->wmi.pending_tx_count) == 0) - wake_up(&ar->wmi.wq); } static int ath10k_wmi_cmd_send_nowait(struct ath10k *ar, struct sk_buff *skb, @@ -1243,7 +1216,6 @@ int ath10k_wmi_attach(struct ath10k *ar) { init_completion(&ar->wmi.service_ready); init_completion(&ar->wmi.unified_ready); - init_waitqueue_head(&ar->wmi.wq); init_waitqueue_head(&ar->wmi.tx_credits_wq); skb_queue_head_init(&ar->wmi.wmi_event_list); @@ -1254,10 +1226,6 @@ int ath10k_wmi_attach(struct ath10k *ar) void ath10k_wmi_detach(struct ath10k *ar) { - /* HTC should've drained the packets already */ - if (WARN_ON(atomic_read(&ar->wmi.pending_tx_count) > 0)) - ath10k_warn("there are still pending packets\n"); - cancel_work_sync(&ar->wmi.wmi_event_work); skb_queue_purge(&ar->wmi.wmi_event_list); } diff --git a/drivers/net/wireless/ath/ath10k/wmi.h b/drivers/net/wireless/ath/ath10k/wmi.h index b100431..2c52c23 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.h +++ b/drivers/net/wireless/ath/ath10k/wmi.h @@ -3044,7 +3044,6 @@ struct wmi_force_fw_hang_cmd { #define WMI_MAX_EVENT 0x1000 /* Maximum number of pending TXed WMI packets */ -#define WMI_MAX_PENDING_TX_COUNT 128 #define WMI_SKB_HEADROOM sizeof(struct wmi_cmd_hdr) /* By default disable power save for IBSS */ @@ -3057,7 +3056,6 @@ int ath10k_wmi_attach(struct ath10k *ar); void ath10k_wmi_detach(struct ath10k *ar); int ath10k_wmi_wait_for_service_ready(struct ath10k *ar); int ath10k_wmi_wait_for_unified_ready(struct ath10k *ar); -void ath10k_wmi_flush_tx(struct ath10k *ar); int ath10k_wmi_connect_htc_service(struct ath10k *ar); int ath10k_wmi_pdev_set_channel(struct ath10k *ar, -- cgit v0.10.2 From 5c6c82df6b574eeb9a8db97833899dc39b1f6a6d Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Fri, 13 Sep 2013 14:16:58 +0200 Subject: ath10k: remove wmi event worker thread It's not really necessary to have this processed in a worker. There are no sleepable calls (and actually shouldn't be). Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index c2b6a76..fcf94ee 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -113,9 +113,6 @@ struct ath10k_wmi { struct completion service_ready; struct completion unified_ready; wait_queue_head_t tx_credits_wq; - - struct sk_buff_head wmi_event_list; - struct work_struct wmi_event_work; }; struct ath10k_peer_stat { diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index b29d2b9..6803ead 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -1055,7 +1055,7 @@ static int ath10k_wmi_ready_event_rx(struct ath10k *ar, struct sk_buff *skb) return 0; } -static void ath10k_wmi_event_process(struct ath10k *ar, struct sk_buff *skb) +static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb) { struct wmi_cmd_hdr *cmd_hdr; enum wmi_event_id id; @@ -1174,43 +1174,6 @@ static void ath10k_wmi_event_process(struct ath10k *ar, struct sk_buff *skb) dev_kfree_skb(skb); } -static void ath10k_wmi_event_work(struct work_struct *work) -{ - struct ath10k *ar = container_of(work, struct ath10k, - wmi.wmi_event_work); - struct sk_buff *skb; - - for (;;) { - skb = skb_dequeue(&ar->wmi.wmi_event_list); - if (!skb) - break; - - ath10k_wmi_event_process(ar, skb); - } -} - -static void ath10k_wmi_process_rx(struct ath10k *ar, struct sk_buff *skb) -{ - struct wmi_cmd_hdr *cmd_hdr = (struct wmi_cmd_hdr *)skb->data; - enum wmi_event_id event_id; - - event_id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID); - - /* some events require to be handled ASAP - * thus can't be defered to a worker thread */ - switch (event_id) { - case WMI_MGMT_RX_EVENTID: - case WMI_HOST_SWBA_EVENTID: - ath10k_wmi_event_process(ar, skb); - return; - default: - break; - } - - skb_queue_tail(&ar->wmi.wmi_event_list, skb); - queue_work(ar->workqueue, &ar->wmi.wmi_event_work); -} - /* WMI Initialization functions */ int ath10k_wmi_attach(struct ath10k *ar) { @@ -1218,16 +1181,11 @@ int ath10k_wmi_attach(struct ath10k *ar) init_completion(&ar->wmi.unified_ready); init_waitqueue_head(&ar->wmi.tx_credits_wq); - skb_queue_head_init(&ar->wmi.wmi_event_list); - INIT_WORK(&ar->wmi.wmi_event_work, ath10k_wmi_event_work); - return 0; } void ath10k_wmi_detach(struct ath10k *ar) { - cancel_work_sync(&ar->wmi.wmi_event_work); - skb_queue_purge(&ar->wmi.wmi_event_list); } int ath10k_wmi_connect_htc_service(struct ath10k *ar) -- cgit v0.10.2 From f81fe64f3d3bc76c1a8d3edb80b54219a60ff291 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Sun, 25 Aug 2013 23:25:15 -0700 Subject: Bluetooth: Refactor raw socket filter into more readable code The handling of the raw socket filter is rather obscure code and it gets in the way of future extensions. Instead of inline filtering in the raw socket packet routine, refactor it into its own function. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 9bd7d95..c45ec25 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -66,6 +66,46 @@ static struct bt_sock_list hci_sk_list = { .lock = __RW_LOCK_UNLOCKED(hci_sk_list.lock) }; +static bool is_filtered_packet(struct sock *sk, struct sk_buff *skb) +{ + struct hci_filter *flt; + int flt_type, flt_event; + + /* Apply filter */ + flt = &hci_pi(sk)->filter; + + if (bt_cb(skb)->pkt_type == HCI_VENDOR_PKT) + flt_type = 0; + else + flt_type = bt_cb(skb)->pkt_type & HCI_FLT_TYPE_BITS; + + if (!test_bit(flt_type, &flt->type_mask)) + return true; + + /* Extra filter for event packets only */ + if (bt_cb(skb)->pkt_type != HCI_EVENT_PKT) + return false; + + flt_event = (*(__u8 *)skb->data & HCI_FLT_EVENT_BITS); + + if (!hci_test_bit(flt_event, &flt->event_mask)) + return true; + + /* Check filter only when opcode is set */ + if (!flt->opcode) + return false; + + if (flt_event == HCI_EV_CMD_COMPLETE && + flt->opcode != get_unaligned((__le16 *)(skb->data + 3))) + return true; + + if (flt_event == HCI_EV_CMD_STATUS && + flt->opcode != get_unaligned((__le16 *)(skb->data + 4))) + return true; + + return false; +} + /* Send frame to RAW socket */ void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb) { @@ -77,7 +117,6 @@ void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb) read_lock(&hci_sk_list.lock); sk_for_each(sk, &hci_sk_list.head) { - struct hci_filter *flt; struct sk_buff *nskb; if (sk->sk_state != BT_BOUND || hci_pi(sk)->hdev != hdev) @@ -90,30 +129,9 @@ void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb) if (hci_pi(sk)->channel != HCI_CHANNEL_RAW) continue; - /* Apply filter */ - flt = &hci_pi(sk)->filter; - - if (!test_bit((bt_cb(skb)->pkt_type == HCI_VENDOR_PKT) ? - 0 : (bt_cb(skb)->pkt_type & HCI_FLT_TYPE_BITS), - &flt->type_mask)) + if (is_filtered_packet(sk, skb)) continue; - if (bt_cb(skb)->pkt_type == HCI_EVENT_PKT) { - int evt = (*(__u8 *)skb->data & HCI_FLT_EVENT_BITS); - - if (!hci_test_bit(evt, &flt->event_mask)) - continue; - - if (flt->opcode && - ((evt == HCI_EV_CMD_COMPLETE && - flt->opcode != - get_unaligned((__le16 *)(skb->data + 3))) || - (evt == HCI_EV_CMD_STATUS && - flt->opcode != - get_unaligned((__le16 *)(skb->data + 4))))) - continue; - } - if (!skb_copy) { /* Create a private copy with headroom */ skb_copy = __pskb_copy(skb, 1, GFP_ATOMIC); -- cgit v0.10.2 From 06f43cbc4d61922d5a14c28909f02ae9c7fc5283 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 00:06:30 -0700 Subject: Bluetooth: Fix handling of getpeername() for HCI sockets The HCI sockets do not have a peer associated with it and so make sure that getpeername() returns EOPNOTSUPP since this operation is actually not supported on HCI sockets. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index c45ec25..d858941 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -699,6 +699,9 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr, BT_DBG("sock %p sk %p", sock, sk); + if (peer) + return -EOPNOTSUPP; + if (!hdev) return -EBADFD; -- cgit v0.10.2 From 9d4b68b23947e7bdf3f2707e76bd61572c523f6c Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 00:20:37 -0700 Subject: Bluetooth: Fix handling of getsockname() for HCI sockets The hci_dev check is not protected and so move it into the socket lock. In addition return the HCI channel identifier instead of always 0 channel. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index d858941..49c5c62 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -695,25 +695,30 @@ static int hci_sock_getname(struct socket *sock, struct sockaddr *addr, { struct sockaddr_hci *haddr = (struct sockaddr_hci *) addr; struct sock *sk = sock->sk; - struct hci_dev *hdev = hci_pi(sk)->hdev; + struct hci_dev *hdev; + int err = 0; BT_DBG("sock %p sk %p", sock, sk); if (peer) return -EOPNOTSUPP; - if (!hdev) - return -EBADFD; - lock_sock(sk); + hdev = hci_pi(sk)->hdev; + if (!hdev) { + err = -EBADFD; + goto done; + } + *addr_len = sizeof(*haddr); haddr->hci_family = AF_BLUETOOTH; haddr->hci_dev = hdev->id; - haddr->hci_channel= 0; + haddr->hci_channel= hci_pi(sk)->channel; +done: release_sock(sk); - return 0; + return err; } static void hci_sock_cmsg(struct sock *sk, struct msghdr *msg, -- cgit v0.10.2 From 808a049e2618bb535274aa41bf954232abc44bf5 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 20:57:58 -0700 Subject: Bluetooth: Report error for HCI reset ioctl when device is down Even if this is legacy API, there is no reason to not report a proper error when trying to reset a HCI device that is down. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 634deba..0976eab 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1344,8 +1344,10 @@ int hci_dev_reset(__u16 dev) hci_req_lock(hdev); - if (!test_bit(HCI_UP, &hdev->flags)) + if (!test_bit(HCI_UP, &hdev->flags)) { + ret = -ENETDOWN; goto done; + } /* Drop queues */ skb_queue_purge(&hdev->rx_q); -- cgit v0.10.2 From c2371e80b3d0d11df10579a39cdad3310c944325 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 09:29:39 -0700 Subject: Bluetooth: Fix error handling for HCI socket options The HCI sockets for monitor and control do not support any HCI specific socket options and if tried, an error will be returned. However the error used is EINVAL and that is not really descriptive. To make it clear that these sockets are not handling HCI socket options, return EBADFD instead. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 49c5c62..f92e913 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -921,7 +921,7 @@ static int hci_sock_setsockopt(struct socket *sock, int level, int optname, lock_sock(sk); if (hci_pi(sk)->channel != HCI_CHANNEL_RAW) { - err = -EINVAL; + err = -EBADFD; goto done; } @@ -1007,7 +1007,7 @@ static int hci_sock_getsockopt(struct socket *sock, int level, int optname, lock_sock(sk); if (hci_pi(sk)->channel != HCI_CHANNEL_RAW) { - err = -EINVAL; + err = -EBADFD; goto done; } -- cgit v0.10.2 From c1c4f9567040c5677828142f52b55422886bd62c Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 09:39:55 -0700 Subject: Bluetooth: Restrict ioctls to HCI raw channel sockets The various legacy ioctls used with HCI sockets are limited to raw channel only. They are not used on the other channels and also have no meaning there. So return an error if tried to use them. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index f92e913..ab57038 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -547,6 +547,15 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, BT_DBG("cmd %x arg %lx", cmd, arg); + lock_sock(sk); + + if (hci_pi(sk)->channel != HCI_CHANNEL_RAW) { + err = -EBADFD; + goto done; + } + + release_sock(sk); + switch (cmd) { case HCIGETDEVLIST: return hci_get_dev_list(argp); @@ -591,13 +600,15 @@ static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, case HCIINQUIRY: return hci_inquiry(argp); - - default: - lock_sock(sk); - err = hci_sock_bound_ioctl(sk, cmd, arg); - release_sock(sk); - return err; } + + lock_sock(sk); + + err = hci_sock_bound_ioctl(sk, cmd, arg); + +done: + release_sock(sk); + return err; } static int hci_sock_bind(struct socket *sock, struct sockaddr *addr, -- cgit v0.10.2 From 0736cfa8e5bb7ee1d7b7d28aabe634fd3f85cb92 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 21:40:51 -0700 Subject: Bluetooth: Introduce user channel flag for HCI devices This patch introduces a new user channel flag that allows to give full control of a HCI device to a user application. The kernel will stay away from the device and does not allow any further modifications of the device states. The existing raw flag is not used since it has a bit of unclear meaning due to its legacy. Using a new flag makes the code clearer. A device with the user channel flag set can still be enumerate using the legacy API, but it does not longer enumerate using the new management interface used by BlueZ 5 and beyond. This is intentional to not confuse users of modern systems. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index aaeaf09..128157d 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -109,6 +109,7 @@ enum { HCI_SERVICE_CACHE, HCI_DEBUG_KEYS, HCI_UNREGISTER, + HCI_USER_CHANNEL, HCI_LE_SCAN, HCI_SSP_ENABLED, diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 0976eab..0ee0f01 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -984,6 +984,11 @@ int hci_inquiry(void __user *arg) if (!hdev) return -ENODEV; + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + err = -EBUSY; + goto done; + } + hci_dev_lock(hdev); if (inquiry_cache_age(hdev) > INQUIRY_CACHE_AGE_MAX || inquiry_cache_empty(hdev) || ir.flags & IREQ_CACHE_FLUSH) { @@ -1177,7 +1182,8 @@ int hci_dev_open(__u16 dev) if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) set_bit(HCI_RAW, &hdev->flags); - if (!test_bit(HCI_RAW, &hdev->flags)) + if (!test_bit(HCI_RAW, &hdev->flags) && + !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) ret = __hci_init(hdev); } @@ -1188,6 +1194,7 @@ int hci_dev_open(__u16 dev) set_bit(HCI_UP, &hdev->flags); hci_notify(hdev, HCI_DEV_UP); if (!test_bit(HCI_SETUP, &hdev->dev_flags) && + !test_bit(HCI_USER_CHANNEL, &hdev->dev_flags) && mgmt_valid_hdev(hdev)) { hci_dev_lock(hdev); mgmt_powered(hdev, 1); @@ -1324,11 +1331,17 @@ int hci_dev_close(__u16 dev) if (!hdev) return -ENODEV; + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + err = -EBUSY; + goto done; + } + if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) cancel_delayed_work(&hdev->power_off); err = hci_dev_do_close(hdev); +done: hci_dev_put(hdev); return err; } @@ -1349,6 +1362,11 @@ int hci_dev_reset(__u16 dev) goto done; } + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + ret = -EBUSY; + goto done; + } + /* Drop queues */ skb_queue_purge(&hdev->rx_q); skb_queue_purge(&hdev->cmd_q); @@ -1382,10 +1400,15 @@ int hci_dev_reset_stat(__u16 dev) if (!hdev) return -ENODEV; + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + ret = -EBUSY; + goto done; + } + memset(&hdev->stat, 0, sizeof(struct hci_dev_stats)); +done: hci_dev_put(hdev); - return ret; } @@ -1402,6 +1425,11 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg) if (!hdev) return -ENODEV; + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + err = -EBUSY; + goto done; + } + switch (cmd) { case HCISETAUTH: err = hci_req_sync(hdev, hci_auth_req, dr.dev_opt, @@ -1460,6 +1488,7 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg) break; } +done: hci_dev_put(hdev); return err; } @@ -1568,6 +1597,9 @@ static int hci_rfkill_set_block(void *data, bool blocked) BT_DBG("%p name %s blocked %d", hdev, hdev->name, blocked); + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) + return -EBUSY; + if (!blocked) return 0; @@ -3459,7 +3491,8 @@ static void hci_rx_work(struct work_struct *work) hci_send_to_sock(hdev, skb); } - if (test_bit(HCI_RAW, &hdev->flags)) { + if (test_bit(HCI_RAW, &hdev->flags) || + test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { kfree_skb(skb); continue; } diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index ab57038..59e68f1 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -500,6 +500,9 @@ static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd, if (!hdev) return -EBADFD; + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) + return -EBUSY; + switch (cmd) { case HCISETRAW: if (!capable(CAP_NET_ADMIN)) @@ -530,19 +533,19 @@ static int hci_sock_bound_ioctl(struct sock *sk, unsigned int cmd, if (!capable(CAP_NET_ADMIN)) return -EPERM; return hci_sock_blacklist_del(hdev, (void __user *) arg); - - default: - if (hdev->ioctl) - return hdev->ioctl(hdev, cmd, arg); - return -EINVAL; } + + if (hdev->ioctl) + return hdev->ioctl(hdev, cmd, arg); + + return -EINVAL; } static int hci_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) { - struct sock *sk = sock->sk; void __user *argp = (void __user *) arg; + struct sock *sk = sock->sk; int err; BT_DBG("cmd %x arg %lx", cmd, arg); diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index fedc539..3070e77 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -339,6 +339,9 @@ static int read_index_list(struct sock *sk, struct hci_dev *hdev, void *data, if (test_bit(HCI_SETUP, &d->dev_flags)) continue; + if (test_bit(HCI_USER_CHANNEL, &d->dev_flags)) + continue; + if (!mgmt_valid_hdev(d)) continue; @@ -3320,6 +3323,12 @@ int mgmt_control(struct sock *sk, struct msghdr *msg, size_t msglen) MGMT_STATUS_INVALID_INDEX); goto done; } + + if (test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + err = cmd_status(sk, index, opcode, + MGMT_STATUS_INVALID_INDEX); + goto done; + } } if (opcode >= ARRAY_SIZE(mgmt_handlers) || -- cgit v0.10.2 From 23500189d7e03a071f0746f43f2cce875a62c91c Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 21:40:52 -0700 Subject: Bluetooth: Introduce new HCI socket channel for user operation This patch introcuces a new HCI socket channel that allows user applications to take control over a specific HCI device. The application gains exclusive access to this device and forces the kernel to stay away and not manage it. In case of the management interface it will actually hide the device. Such operation is useful for security testing tools that need to operate underneath the Bluetooth stack and need full control over a device. The advantage here is that the kernel still provides the service of hardware abstraction and HCI level access. The use of Bluetooth drivers for hardware access also means that sniffing tools like btmon or hcidump are still working and the whole set of transaction can be traced with existing tools. With the new channel it is possible to send HCI commands, ACL and SCO data packets and receive HCI events, ACL and SCO packets from the device. The format follows the well established H:4 protocol. The new HCI user channel can only be established when a device has been through its setup routine and is currently powered down. This is enforced to not cause any problems with current operations. In addition only one user channel per HCI device is allowed. It is exclusive access for one user application. Access to this channel is limited to process with CAP_NET_RAW capability. Using this new facility does not require any external library or special ioctl or socket filters. Just create the socket and bind it. After that the file descriptor is ready to speak H:4 protocol. struct sockaddr_hci addr; int fd; fd = socket(AF_BLUETOOTH, SOCK_RAW, BTPROTO_HCI); memset(&addr, 0, sizeof(addr)); addr.hci_family = AF_BLUETOOTH; addr.hci_dev = 0; addr.hci_channel = HCI_CHANNEL_USER; bind(fd, (struct sockaddr *) &addr, sizeof(addr)); The example shows on how to create a user channel for hci0 device. Error handling has been left out of the example. However with the limitations mentioned above it is advised to handle errors. Binding of the user cahnnel socket can fail for various reasons. Specifically if the device is currently activated by BlueZ or if the access permissions are not present. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 128157d..30c88b5 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1571,6 +1571,7 @@ struct sockaddr_hci { #define HCI_DEV_NONE 0xffff #define HCI_CHANNEL_RAW 0 +#define HCI_CHANNEL_USER 1 #define HCI_CHANNEL_MONITOR 2 #define HCI_CHANNEL_CONTROL 3 diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index 59e68f1..c09e976 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -126,11 +126,20 @@ void hci_send_to_sock(struct hci_dev *hdev, struct sk_buff *skb) if (skb->sk == sk) continue; - if (hci_pi(sk)->channel != HCI_CHANNEL_RAW) - continue; - - if (is_filtered_packet(sk, skb)) + if (hci_pi(sk)->channel == HCI_CHANNEL_RAW) { + if (is_filtered_packet(sk, skb)) + continue; + } else if (hci_pi(sk)->channel == HCI_CHANNEL_USER) { + if (!bt_cb(skb)->incoming) + continue; + if (bt_cb(skb)->pkt_type != HCI_EVENT_PKT && + bt_cb(skb)->pkt_type != HCI_ACLDATA_PKT && + bt_cb(skb)->pkt_type != HCI_SCODATA_PKT) + continue; + } else { + /* Don't send frame to other channel types */ continue; + } if (!skb_copy) { /* Create a private copy with headroom */ @@ -444,6 +453,12 @@ static int hci_sock_release(struct socket *sock) bt_sock_unlink(&hci_sk_list, sk); if (hdev) { + if (hci_pi(sk)->channel == HCI_CHANNEL_USER) { + mgmt_index_added(hdev); + clear_bit(HCI_USER_CHANNEL, &hdev->dev_flags); + hci_dev_close(hdev->id); + } + atomic_dec(&hdev->promisc); hci_dev_put(hdev); } @@ -661,6 +676,56 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr, hci_pi(sk)->hdev = hdev; break; + case HCI_CHANNEL_USER: + if (hci_pi(sk)->hdev) { + err = -EALREADY; + goto done; + } + + if (haddr.hci_dev == HCI_DEV_NONE) { + err = -EINVAL; + goto done; + } + + if (!capable(CAP_NET_RAW)) { + err = -EPERM; + goto done; + } + + hdev = hci_dev_get(haddr.hci_dev); + if (!hdev) { + err = -ENODEV; + goto done; + } + + if (test_bit(HCI_UP, &hdev->flags) || + test_bit(HCI_INIT, &hdev->flags) || + test_bit(HCI_SETUP, &hdev->dev_flags)) { + err = -EBUSY; + hci_dev_put(hdev); + goto done; + } + + if (test_and_set_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + err = -EUSERS; + hci_dev_put(hdev); + goto done; + } + + mgmt_index_removed(hdev); + + err = hci_dev_open(hdev->id); + if (err) { + clear_bit(HCI_USER_CHANNEL, &hdev->dev_flags); + hci_dev_put(hdev); + goto done; + } + + atomic_inc(&hdev->promisc); + + hci_pi(sk)->hdev = hdev; + break; + case HCI_CHANNEL_CONTROL: if (haddr.hci_dev != HCI_DEV_NONE) { err = -EINVAL; @@ -807,6 +872,7 @@ static int hci_sock_recvmsg(struct kiocb *iocb, struct socket *sock, case HCI_CHANNEL_RAW: hci_sock_cmsg(sk, msg, skb); break; + case HCI_CHANNEL_USER: case HCI_CHANNEL_CONTROL: case HCI_CHANNEL_MONITOR: sock_recv_timestamp(msg, sk, skb); @@ -841,6 +907,7 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, switch (hci_pi(sk)->channel) { case HCI_CHANNEL_RAW: + case HCI_CHANNEL_USER: break; case HCI_CHANNEL_CONTROL: err = mgmt_control(sk, msg, len); @@ -877,7 +944,8 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, skb_pull(skb, 1); skb->dev = (void *) hdev; - if (bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { + if (hci_pi(sk)->channel == HCI_CHANNEL_RAW && + bt_cb(skb)->pkt_type == HCI_COMMAND_PKT) { u16 opcode = get_unaligned_le16(skb->data); u16 ogf = hci_opcode_ogf(opcode); u16 ocf = hci_opcode_ocf(opcode); @@ -908,6 +976,14 @@ static int hci_sock_sendmsg(struct kiocb *iocb, struct socket *sock, goto drop; } + if (hci_pi(sk)->channel == HCI_CHANNEL_USER && + bt_cb(skb)->pkt_type != HCI_COMMAND_PKT && + bt_cb(skb)->pkt_type != HCI_ACLDATA_PKT && + bt_cb(skb)->pkt_type != HCI_SCODATA_PKT) { + err = -EINVAL; + goto drop; + } + skb_queue_tail(&hdev->raw_q, skb); queue_work(hdev->workqueue, &hdev->tx_work); } -- cgit v0.10.2 From bfacbb9aec029b3200053d84c8cd5d7575f2d4a5 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 26 Aug 2013 22:02:38 -0700 Subject: Bluetooth: Use devname:vhci module alias for virtual HCI driver To allow creating /dev/vhci device node, add the proper module alias for this driver. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c index d8b7aed..a1ea5b1 100644 --- a/drivers/bluetooth/hci_vhci.c +++ b/drivers/bluetooth/hci_vhci.c @@ -309,3 +309,4 @@ MODULE_AUTHOR("Marcel Holtmann "); MODULE_DESCRIPTION("Bluetooth virtual HCI driver ver " VERSION); MODULE_VERSION(VERSION); MODULE_LICENSE("GPL"); +MODULE_ALIAS("devname:vhci"); -- cgit v0.10.2 From 23424c0d316941f30cd953fcbff7082044228487 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Mon, 2 Sep 2013 10:41:39 -0700 Subject: Bluetooth: Add support creating virtual AMP controllers So far the only option to create a virtual AMP controller was by setting a module parameter for the hci_vhci driver. This patch adds the functionality to define inline to create either a BR/EDR or an AMP controller. In addition the client will be informed which HCI controller index it got assigned. That is especially useful for automated end-to-end testing. To keep backwards compatibility with existing userspace, the command for creating a controller type needs to be send right after opening the device node. If the command is not send, it defaults back to automatically creating a BR/EDR controller. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/drivers/bluetooth/hci_vhci.c b/drivers/bluetooth/hci_vhci.c index a1ea5b1..c04a3e6 100644 --- a/drivers/bluetooth/hci_vhci.c +++ b/drivers/bluetooth/hci_vhci.c @@ -24,6 +24,7 @@ */ #include +#include #include #include @@ -39,17 +40,17 @@ #include #include -#define VERSION "1.3" +#define VERSION "1.4" static bool amp; struct vhci_data { struct hci_dev *hdev; - unsigned long flags; - wait_queue_head_t read_wait; struct sk_buff_head readq; + + struct delayed_work open_timeout; }; static int vhci_open_dev(struct hci_dev *hdev) @@ -99,16 +100,62 @@ static int vhci_send_frame(struct sk_buff *skb) skb_queue_tail(&data->readq, skb); wake_up_interruptible(&data->read_wait); + return 0; +} + +static int vhci_create_device(struct vhci_data *data, __u8 dev_type) +{ + struct hci_dev *hdev; + struct sk_buff *skb; + + skb = bt_skb_alloc(4, GFP_KERNEL); + if (!skb) + return -ENOMEM; + + hdev = hci_alloc_dev(); + if (!hdev) { + kfree_skb(skb); + return -ENOMEM; + } + + data->hdev = hdev; + + hdev->bus = HCI_VIRTUAL; + hdev->dev_type = dev_type; + hci_set_drvdata(hdev, data); + + hdev->open = vhci_open_dev; + hdev->close = vhci_close_dev; + hdev->flush = vhci_flush; + hdev->send = vhci_send_frame; + if (hci_register_dev(hdev) < 0) { + BT_ERR("Can't register HCI device"); + hci_free_dev(hdev); + data->hdev = NULL; + kfree_skb(skb); + return -EBUSY; + } + + bt_cb(skb)->pkt_type = HCI_VENDOR_PKT; + + *skb_put(skb, 1) = 0xff; + *skb_put(skb, 1) = dev_type; + put_unaligned_le16(hdev->id, skb_put(skb, 2)); + skb_queue_tail(&data->readq, skb); + + wake_up_interruptible(&data->read_wait); return 0; } static inline ssize_t vhci_get_user(struct vhci_data *data, - const char __user *buf, size_t count) + const char __user *buf, size_t count) { struct sk_buff *skb; + __u8 pkt_type, dev_type; + int ret; - if (count > HCI_MAX_FRAME_SIZE) + if (count < 2 || count > HCI_MAX_FRAME_SIZE) return -EINVAL; skb = bt_skb_alloc(count, GFP_KERNEL); @@ -120,27 +167,70 @@ static inline ssize_t vhci_get_user(struct vhci_data *data, return -EFAULT; } - skb->dev = (void *) data->hdev; - bt_cb(skb)->pkt_type = *((__u8 *) skb->data); + pkt_type = *((__u8 *) skb->data); skb_pull(skb, 1); - hci_recv_frame(skb); + switch (pkt_type) { + case HCI_EVENT_PKT: + case HCI_ACLDATA_PKT: + case HCI_SCODATA_PKT: + if (!data->hdev) { + kfree_skb(skb); + return -ENODEV; + } + + skb->dev = (void *) data->hdev; + bt_cb(skb)->pkt_type = pkt_type; + + ret = hci_recv_frame(skb); + break; + + case HCI_VENDOR_PKT: + if (data->hdev) { + kfree_skb(skb); + return -EBADFD; + } - return count; + cancel_delayed_work_sync(&data->open_timeout); + + dev_type = *((__u8 *) skb->data); + skb_pull(skb, 1); + + if (skb->len > 0) { + kfree_skb(skb); + return -EINVAL; + } + + kfree_skb(skb); + + if (dev_type != HCI_BREDR && dev_type != HCI_AMP) + return -EINVAL; + + ret = vhci_create_device(data, dev_type); + break; + + default: + kfree_skb(skb); + return -EINVAL; + } + + return (ret < 0) ? ret : count; } static inline ssize_t vhci_put_user(struct vhci_data *data, - struct sk_buff *skb, char __user *buf, int count) + struct sk_buff *skb, + char __user *buf, int count) { char __user *ptr = buf; - int len, total = 0; + int len; len = min_t(unsigned int, skb->len, count); if (copy_to_user(ptr, skb->data, len)) return -EFAULT; - total += len; + if (!data->hdev) + return len; data->hdev->stat.byte_tx += len; @@ -148,21 +238,19 @@ static inline ssize_t vhci_put_user(struct vhci_data *data, case HCI_COMMAND_PKT: data->hdev->stat.cmd_tx++; break; - case HCI_ACLDATA_PKT: data->hdev->stat.acl_tx++; break; - case HCI_SCODATA_PKT: data->hdev->stat.sco_tx++; break; } - return total; + return len; } static ssize_t vhci_read(struct file *file, - char __user *buf, size_t count, loff_t *pos) + char __user *buf, size_t count, loff_t *pos) { struct vhci_data *data = file->private_data; struct sk_buff *skb; @@ -185,7 +273,7 @@ static ssize_t vhci_read(struct file *file, } ret = wait_event_interruptible(data->read_wait, - !skb_queue_empty(&data->readq)); + !skb_queue_empty(&data->readq)); if (ret < 0) break; } @@ -194,7 +282,7 @@ static ssize_t vhci_read(struct file *file, } static ssize_t vhci_write(struct file *file, - const char __user *buf, size_t count, loff_t *pos) + const char __user *buf, size_t count, loff_t *pos) { struct vhci_data *data = file->private_data; @@ -213,10 +301,17 @@ static unsigned int vhci_poll(struct file *file, poll_table *wait) return POLLOUT | POLLWRNORM; } +static void vhci_open_timeout(struct work_struct *work) +{ + struct vhci_data *data = container_of(work, struct vhci_data, + open_timeout.work); + + vhci_create_device(data, amp ? HCI_AMP : HCI_BREDR); +} + static int vhci_open(struct inode *inode, struct file *file) { struct vhci_data *data; - struct hci_dev *hdev; data = kzalloc(sizeof(struct vhci_data), GFP_KERNEL); if (!data) @@ -225,35 +320,13 @@ static int vhci_open(struct inode *inode, struct file *file) skb_queue_head_init(&data->readq); init_waitqueue_head(&data->read_wait); - hdev = hci_alloc_dev(); - if (!hdev) { - kfree(data); - return -ENOMEM; - } - - data->hdev = hdev; - - hdev->bus = HCI_VIRTUAL; - hci_set_drvdata(hdev, data); - - if (amp) - hdev->dev_type = HCI_AMP; - - hdev->open = vhci_open_dev; - hdev->close = vhci_close_dev; - hdev->flush = vhci_flush; - hdev->send = vhci_send_frame; - - if (hci_register_dev(hdev) < 0) { - BT_ERR("Can't register HCI device"); - kfree(data); - hci_free_dev(hdev); - return -EBUSY; - } + INIT_DELAYED_WORK(&data->open_timeout, vhci_open_timeout); file->private_data = data; nonseekable_open(inode, file); + schedule_delayed_work(&data->open_timeout, msecs_to_jiffies(1000)); + return 0; } @@ -262,8 +335,12 @@ static int vhci_release(struct inode *inode, struct file *file) struct vhci_data *data = file->private_data; struct hci_dev *hdev = data->hdev; - hci_unregister_dev(hdev); - hci_free_dev(hdev); + cancel_delayed_work_sync(&data->open_timeout); + + if (hdev) { + hci_unregister_dev(hdev); + hci_free_dev(hdev); + } file->private_data = NULL; kfree(data); -- cgit v0.10.2 From af750e942ea138553ee5693210c2f918448f58dc Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 3 Sep 2013 18:08:37 -0700 Subject: Bluetooth: Disable upper layer connections when user channel is active When the device has the user channel flag set, it means it is driven by an user application. In that case do not allow any connections from L2CAP or SCO sockets. This is the same situation as when the device has the raw flag set and it will then return EHOSTUNREACH. Signed-off-by: Marcel Holtmann Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index f081712..d2380e0 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -518,6 +518,7 @@ struct hci_dev *hci_get_route(bdaddr_t *dst, bdaddr_t *src) list_for_each_entry(d, &hci_dev_list, list) { if (!test_bit(HCI_UP, &d->flags) || test_bit(HCI_RAW, &d->flags) || + test_bit(HCI_USER_CHANNEL, &d->dev_flags) || d->dev_type != HCI_BREDR) continue; -- cgit v0.10.2 From a675d7f1a0a0c0d7bde56ae89609dee56f2033e1 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 3 Sep 2013 18:11:07 -0700 Subject: Bluetooth: Use GFP_KERNEL when cloning SKB in a workqueue There is no need to use GFP_ATOMIC with skb_clone() when the code is executed in a workqueue. Signed-off-by: Marcel Holtmann Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 0ee0f01..26673d3 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -3547,7 +3547,7 @@ static void hci_cmd_work(struct work_struct *work) kfree_skb(hdev->sent_cmd); - hdev->sent_cmd = skb_clone(skb, GFP_ATOMIC); + hdev->sent_cmd = skb_clone(skb, GFP_KERNEL); if (hdev->sent_cmd) { atomic_dec(&hdev->cmd_cnt); hci_send_frame(skb); -- cgit v0.10.2 From 52de599e04e8767b0d9b7874451cb5db91a4a70b Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 3 Sep 2013 18:08:38 -0700 Subject: Bluetooth: Only schedule raw queue when user channel is active When the user channel is set and an user application has full control over the device, do not bother trying to schedule any queues except the raw queue. This is an optimization since with user channel, only the raw queue is in use. Signed-off-by: Marcel Holtmann Acked-by: Johan Hedberg Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 26673d3..b24d2fa 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -3292,15 +3292,13 @@ static void hci_tx_work(struct work_struct *work) BT_DBG("%s acl %d sco %d le %d", hdev->name, hdev->acl_cnt, hdev->sco_cnt, hdev->le_cnt); - /* Schedule queues and send stuff to HCI driver */ - - hci_sched_acl(hdev); - - hci_sched_sco(hdev); - - hci_sched_esco(hdev); - - hci_sched_le(hdev); + if (!test_bit(HCI_USER_CHANNEL, &hdev->dev_flags)) { + /* Schedule queues and send stuff to HCI driver */ + hci_sched_acl(hdev); + hci_sched_sco(hdev); + hci_sched_esco(hdev); + hci_sched_le(hdev); + } /* Send next queued raw (unknown type) packet */ while ((skb = skb_dequeue(&hdev->raw_q))) -- cgit v0.10.2 From 0af784dcbc44e3cf21a1bda3ce14df5fcc2bfe93 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:12 +0300 Subject: Bluetooth: Remove unused event mask struct The struct for HCI_Set_Event_Mask is never used. Instead a local 8-byte array is used for sending this command. Therefore, remove the unnecessary struct definition. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 30c88b5..52bd248 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -694,9 +694,6 @@ struct hci_cp_sniff_subrate { } __packed; #define HCI_OP_SET_EVENT_MASK 0x0c01 -struct hci_cp_set_event_mask { - __u8 mask[8]; -} __packed; #define HCI_OP_RESET 0x0c03 -- cgit v0.10.2 From dc280801da1006cd9c702cfaae7ae677fdbc5b53 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:13 +0300 Subject: Bluetooth: Fix double error response for l2cap_create_chan_req When an L2CAP request handler returns non-zero the calling code will send a command reject response. The l2cap_create_chan_req function will in some cases send its own response but then still return a -EFAULT error which would cause two responses to be sent. This patch fixes this by making the function return 0 after sending its own response. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index b3bb7bc..0b8a270 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4462,7 +4462,7 @@ error: l2cap_send_cmd(conn, cmd->ident, L2CAP_CREATE_CHAN_RSP, sizeof(rsp), &rsp); - return -EFAULT; + return 0; } static void l2cap_send_move_chan_req(struct l2cap_chan *chan, u8 dest_amp_id) -- cgit v0.10.2 From 21870b523e847432312a1b62239ad139369e9f9f Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:14 +0300 Subject: Bluetooth: Fix L2CAP error return used for failed channel lookups The EFAULT error should only be used for memory address related errors and ENOENT might be needed for other purposes than invalid CID errors. This patch fixes the l2cap_config_req, l2cap_connect_create_rsp and l2cap_create_channel_req handlers to use the unique EBADSLT error to indicate failed lookups on a given CID. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 0b8a270..eb60cf7 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -3884,13 +3884,13 @@ static int l2cap_connect_create_rsp(struct l2cap_conn *conn, if (scid) { chan = __l2cap_get_chan_by_scid(conn, scid); if (!chan) { - err = -EFAULT; + err = -EBADSLT; goto unlock; } } else { chan = __l2cap_get_chan_by_ident(conn, cmd->ident); if (!chan) { - err = -EFAULT; + err = -EBADSLT; goto unlock; } } @@ -3978,7 +3978,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn, chan = l2cap_get_chan_by_scid(conn, dcid); if (!chan) - return -ENOENT; + return -EBADSLT; if (chan->state != BT_CONFIG && chan->state != BT_CONNECT2) { struct l2cap_cmd_rej_cid rej; @@ -4438,7 +4438,7 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn, hs_hcon = hci_conn_hash_lookup_ba(hdev, AMP_LINK, conn->dst); if (!hs_hcon) { hci_dev_put(hdev); - return -EFAULT; + return -EBADSLT; } BT_DBG("mgr %p bredr_chan %p hs_hcon %p", mgr, chan, hs_hcon); -- cgit v0.10.2 From c4ea249f5f164957ec8402ba9f3b827d740b299c Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:15 +0300 Subject: Bluetooth: Fix L2CAP Disconnect response for unknown CID If we receive an L2CAP Disconnect Request for an unknown CID we should not just silently drop it but reply with a proper Command Reject response. This patch fixes this by ensuring that the disconnect handler returns a proper error instead of 0 and will cause the function caller to send the right response. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index eb60cf7..31bf812 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -4206,7 +4206,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, chan = __l2cap_get_chan_by_scid(conn, dcid); if (!chan) { mutex_unlock(&conn->chan_lock); - return 0; + return -EBADSLT; } l2cap_chan_lock(chan); -- cgit v0.10.2 From 7c2005d6f9128aec77833019f5c134e4c63af9c5 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:16 +0300 Subject: Bluetooth: Fix L2CAP command reject reason There are several possible reason codes that can be sent in the command reject L2CAP packet. Before this patch the code has used a hard-coded single response code ("command not understood"). This patch adds a helper function to map the return value of an L2CAP handler function to the correct command reject reason. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 31bf812..2ff35a2 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -5294,6 +5294,20 @@ static inline int l2cap_le_sig_cmd(struct l2cap_conn *conn, } } +static __le16 l2cap_err_to_reason(int err) +{ + switch (err) { + case -EBADSLT: + return __constant_cpu_to_le16(L2CAP_REJ_INVALID_CID); + case -EMSGSIZE: + return __constant_cpu_to_le16(L2CAP_REJ_MTU_EXCEEDED); + case -EINVAL: + case -EPROTO: + default: + return __constant_cpu_to_le16(L2CAP_REJ_NOT_UNDERSTOOD); + } +} + static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) { @@ -5326,8 +5340,7 @@ static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, BT_ERR("Wrong link type (%d)", err); - /* FIXME: Map err to a valid reason */ - rej.reason = __constant_cpu_to_le16(L2CAP_REJ_NOT_UNDERSTOOD); + rej.reason = l2cap_err_to_reason(err); l2cap_send_cmd(conn, cmd.ident, L2CAP_COMMAND_REJ, sizeof(rej), &rej); } @@ -5371,8 +5384,7 @@ static inline void l2cap_sig_channel(struct l2cap_conn *conn, BT_ERR("Wrong link type (%d)", err); - /* FIXME: Map err to a valid reason */ - rej.reason = __constant_cpu_to_le16(L2CAP_REJ_NOT_UNDERSTOOD); + rej.reason = l2cap_err_to_reason(err); l2cap_send_cmd(conn, cmd.ident, L2CAP_COMMAND_REJ, sizeof(rej), &rej); } -- cgit v0.10.2 From 9245e7375816c4d94d6327c8761b3c7431a5bc2f Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:17 +0300 Subject: Bluetooth: Fix sending responses to identified L2CAP response packets When L2CAP packets return a non-zero error and the value is passed onwards by l2cap_bredr_sig_cmd this will trigger a command reject packet to be sent. However, the core specification (page 1416 in core 4.0) says the following: "Command Reject packets should not be sent in response to an identified Response packet.". This patch ensures that a command reject packet is not sent for any identified response packet by ignoring the error return value from the response handler functions. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 2ff35a2..b0947ae 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -5212,7 +5212,7 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, case L2CAP_CONN_RSP: case L2CAP_CREATE_CHAN_RSP: - err = l2cap_connect_create_rsp(conn, cmd, cmd_len, data); + l2cap_connect_create_rsp(conn, cmd, cmd_len, data); break; case L2CAP_CONF_REQ: @@ -5220,7 +5220,7 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_CONF_RSP: - err = l2cap_config_rsp(conn, cmd, cmd_len, data); + l2cap_config_rsp(conn, cmd, cmd_len, data); break; case L2CAP_DISCONN_REQ: @@ -5228,7 +5228,7 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_DISCONN_RSP: - err = l2cap_disconnect_rsp(conn, cmd, cmd_len, data); + l2cap_disconnect_rsp(conn, cmd, cmd_len, data); break; case L2CAP_ECHO_REQ: @@ -5243,7 +5243,7 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_INFO_RSP: - err = l2cap_information_rsp(conn, cmd, cmd_len, data); + l2cap_information_rsp(conn, cmd, cmd_len, data); break; case L2CAP_CREATE_CHAN_REQ: @@ -5255,7 +5255,7 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_MOVE_CHAN_RSP: - err = l2cap_move_channel_rsp(conn, cmd, cmd_len, data); + l2cap_move_channel_rsp(conn, cmd, cmd_len, data); break; case L2CAP_MOVE_CHAN_CFM: @@ -5263,7 +5263,7 @@ static inline int l2cap_bredr_sig_cmd(struct l2cap_conn *conn, break; case L2CAP_MOVE_CHAN_CFM_RSP: - err = l2cap_move_channel_confirm_rsp(conn, cmd, cmd_len, data); + l2cap_move_channel_confirm_rsp(conn, cmd, cmd_len, data); break; default: -- cgit v0.10.2 From 69c4e4e8b4ca8440e5cbb66219a179e73f7b9e9a Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:18 +0300 Subject: Bluetooth: Fix responding to invalid L2CAP signaling commands When we have an LE link we should not respond to any data on the BR/EDR L2CAP signaling channel (0x0001) and vice-versa when we have a BR/EDR link we should not respond to LE L2CAP (CID 0x0005) signaling commands. This patch fixes this issue by checking for a valid link type and ignores data if it is wrong. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index b0947ae..636a3b4 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -5311,6 +5311,7 @@ static __le16 l2cap_err_to_reason(int err) static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) { + struct hci_conn *hcon = conn->hcon; u8 *data = skb->data; int len = skb->len; struct l2cap_cmd_hdr cmd; @@ -5318,6 +5319,9 @@ static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, l2cap_raw_recv(conn, skb); + if (hcon->type != LE_LINK) + return; + while (len >= L2CAP_CMD_HDR_SIZE) { u16 cmd_len; memcpy(&cmd, data, L2CAP_CMD_HDR_SIZE); @@ -5355,6 +5359,7 @@ static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, static inline void l2cap_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) { + struct hci_conn *hcon = conn->hcon; u8 *data = skb->data; int len = skb->len; struct l2cap_cmd_hdr cmd; @@ -5362,6 +5367,9 @@ static inline void l2cap_sig_channel(struct l2cap_conn *conn, l2cap_raw_recv(conn, skb); + if (hcon->type != ACL_LINK) + return; + while (len >= L2CAP_CMD_HDR_SIZE) { u16 cmd_len; memcpy(&cmd, data, L2CAP_CMD_HDR_SIZE); -- cgit v0.10.2 From e793dcf082c847bd2b742c781252c20cbec37986 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Mon, 16 Sep 2013 13:05:19 +0300 Subject: Bluetooth: Fix waiting for clearing of BT_SK_SUSPEND flag In the case of blocking sockets we should not proceed with sendmsg() if the socket has the BT_SK_SUSPEND flag set. So far the code was only ensuring that POLLOUT doesn't get set for non-blocking sockets using poll() but there was no code in place to ensure that blocking sockets do the right thing when writing to them. This patch adds a new bt_sock_wait_ready helper function to sleep in the sendmsg call if the BT_SK_SUSPEND flag is set, and wake up as soon as it is unset. It also updates the L2CAP and RFCOMM sendmsg callbacks to take advantage of this new helper function. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index 10d43d8..afbc711 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -249,6 +249,7 @@ int bt_sock_stream_recvmsg(struct kiocb *iocb, struct socket *sock, uint bt_sock_poll(struct file *file, struct socket *sock, poll_table *wait); int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg); int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo); +int bt_sock_wait_ready(struct sock *sk, unsigned long flags); void bt_accept_enqueue(struct sock *parent, struct sock *sk); void bt_accept_unlink(struct sock *sk); diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index 9096137..c600631 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -525,6 +525,46 @@ int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo) } EXPORT_SYMBOL(bt_sock_wait_state); +/* This function expects the sk lock to be held when called */ +int bt_sock_wait_ready(struct sock *sk, unsigned long flags) +{ + DECLARE_WAITQUEUE(wait, current); + unsigned long timeo; + int err = 0; + + BT_DBG("sk %p", sk); + + timeo = sock_sndtimeo(sk, flags & O_NONBLOCK); + + add_wait_queue(sk_sleep(sk), &wait); + set_current_state(TASK_INTERRUPTIBLE); + while (test_bit(BT_SK_SUSPEND, &bt_sk(sk)->flags)) { + if (!timeo) { + err = -EAGAIN; + break; + } + + if (signal_pending(current)) { + err = sock_intr_errno(timeo); + break; + } + + release_sock(sk); + timeo = schedule_timeout(timeo); + lock_sock(sk); + set_current_state(TASK_INTERRUPTIBLE); + + err = sock_error(sk); + if (err) + break; + } + __set_current_state(TASK_RUNNING); + remove_wait_queue(sk_sleep(sk), &wait); + + return err; +} +EXPORT_SYMBOL(bt_sock_wait_ready); + #ifdef CONFIG_PROC_FS struct bt_seq_state { struct bt_sock_list *l; diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index 0098af8..ad95b42 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -777,6 +777,12 @@ static int l2cap_sock_sendmsg(struct kiocb *iocb, struct socket *sock, if (sk->sk_state != BT_CONNECTED) return -ENOTCONN; + lock_sock(sk); + err = bt_sock_wait_ready(sk, msg->msg_flags); + release_sock(sk); + if (err) + return err; + l2cap_chan_lock(chan); err = l2cap_chan_send(chan, msg, len, sk->sk_priority); l2cap_chan_unlock(chan); diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c index 30b3721..072938d 100644 --- a/net/bluetooth/rfcomm/sock.c +++ b/net/bluetooth/rfcomm/sock.c @@ -544,7 +544,7 @@ static int rfcomm_sock_sendmsg(struct kiocb *iocb, struct socket *sock, struct sock *sk = sock->sk; struct rfcomm_dlc *d = rfcomm_pi(sk)->dlc; struct sk_buff *skb; - int sent = 0; + int sent; if (test_bit(RFCOMM_DEFER_SETUP, &d->flags)) return -ENOTCONN; @@ -559,6 +559,10 @@ static int rfcomm_sock_sendmsg(struct kiocb *iocb, struct socket *sock, lock_sock(sk); + sent = bt_sock_wait_ready(sk, msg->msg_flags); + if (sent) + goto done; + while (len) { size_t size = min_t(size_t, len, d->mtu); int err; @@ -594,6 +598,7 @@ static int rfcomm_sock_sendmsg(struct kiocb *iocb, struct socket *sock, len -= size; } +done: release_sock(sk); return sent; -- cgit v0.10.2 From 5d4e7e8db0544ec53025383bac49a3328affdad3 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 13 Sep 2013 11:40:01 +0300 Subject: Bluetooth: Add synchronization train parameters reading support This patch adds support for reading the synchronization train parameters for controllers that support the feature. Since the feature is detectable through the local features page 2, which is retreived only in stage 3 of the HCI init sequence, there is no other option than to add a fourth stage to the init sequence. For now the patch doesn't yet add storing of the parameters, but it is nevertheless convenient to have around to see what kind of parameters various controllers use by default (analyzable e.g. with the btmon user space tool). Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 52bd248..f7197a0 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -835,6 +835,8 @@ struct hci_cp_write_le_host_supported { __u8 simul; } __packed; +#define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77 + #define HCI_OP_READ_LOCAL_VERSION 0x1001 struct hci_rp_read_local_version { __u8 status; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index b24d2fa..ea542e0 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -648,6 +648,15 @@ static void hci_init3_req(struct hci_request *req, unsigned long opt) } } +static void hci_init4_req(struct hci_request *req, unsigned long opt) +{ + struct hci_dev *hdev = req->hdev; + + /* Check for Synchronization Train support */ + if (hdev->features[2][0] & 0x04) + hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL); +} + static int __hci_init(struct hci_dev *hdev) { int err; @@ -667,7 +676,11 @@ static int __hci_init(struct hci_dev *hdev) if (err < 0) return err; - return __hci_req_sync(hdev, hci_init3_req, 0, HCI_INIT_TIMEOUT); + err = __hci_req_sync(hdev, hci_init3_req, 0, HCI_INIT_TIMEOUT); + if (err < 0) + return err; + + return __hci_req_sync(hdev, hci_init4_req, 0, HCI_INIT_TIMEOUT); } static void hci_scan_req(struct hci_request *req, unsigned long opt) -- cgit v0.10.2 From d62e6d67a776fe6a0a725e2835e4f9e16e8db512 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Fri, 13 Sep 2013 11:40:02 +0300 Subject: Bluetooth: Add event mask page 2 setting support For those controller that support the HCI_Set_Event_Mask_Page_2 command we should include it in the init sequence. This patch implements sending of the command and enables the events in it based on supported features (currently only CSB is checked). Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index f7197a0..22d6e66 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -823,6 +823,8 @@ struct hci_rp_read_inq_rsp_tx_power { __s8 tx_power; } __packed; +#define HCI_OP_SET_EVENT_MASK_PAGE_2 0x0c63 + #define HCI_OP_READ_FLOW_CONTROL_MODE 0x0c66 struct hci_rp_read_flow_control_mode { __u8 status; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index ea542e0..3d9f02b 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -607,6 +607,34 @@ static void hci_set_le_support(struct hci_request *req) &cp); } +static void hci_set_event_mask_page_2(struct hci_request *req) +{ + struct hci_dev *hdev = req->hdev; + u8 events[8] = { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; + + /* If Connectionless Slave Broadcast master role is supported + * enable all necessary events for it. + */ + if (hdev->features[2][0] & 0x01) { + events[1] |= 0x40; /* Triggered Clock Capture */ + events[1] |= 0x80; /* Synchronization Train Complete */ + events[2] |= 0x10; /* Slave Page Response Timeout */ + events[2] |= 0x20; /* CSB Channel Map Change */ + } + + /* If Connectionless Slave Broadcast slave role is supported + * enable all necessary events for it. + */ + if (hdev->features[2][0] & 0x02) { + events[2] |= 0x01; /* Synchronization Train Received */ + events[2] |= 0x02; /* CSB Receive */ + events[2] |= 0x04; /* CSB Timeout */ + events[2] |= 0x08; /* Truncated Page Complete */ + } + + hci_req_add(req, HCI_OP_SET_EVENT_MASK_PAGE_2, sizeof(events), events); +} + static void hci_init3_req(struct hci_request *req, unsigned long opt) { struct hci_dev *hdev = req->hdev; @@ -652,6 +680,10 @@ static void hci_init4_req(struct hci_request *req, unsigned long opt) { struct hci_dev *hdev = req->hdev; + /* Set event mask page 2 if the HCI command for it is supported */ + if (hdev->commands[22] & 0x04) + hci_set_event_mask_page_2(req); + /* Check for Synchronization Train support */ if (hdev->features[2][0] & 0x04) hci_req_add(req, HCI_OP_READ_SYNC_TRAIN_PARAMS, 0, NULL); -- cgit v0.10.2 From 9e84f653ac16b718dd2305abe64a29bb3428621e Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Thu, 19 Sep 2013 09:44:09 +0200 Subject: ath10k: fix tracing build for ath10k_wmi_cmd Commit be8b394390 ("ath10k: make WMI commands block by design") broke the build if CONFIG_ATH10K_TRACING was enabled. Reported-by: kbuild test robot Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/trace.h b/drivers/net/wireless/ath/ath10k/trace.h index fd53130..90817dd 100644 --- a/drivers/net/wireless/ath/ath10k/trace.h +++ b/drivers/net/wireless/ath/ath10k/trace.h @@ -119,7 +119,7 @@ TRACE_EVENT(ath10k_wmi_cmd, __field(unsigned int, id) __field(size_t, buf_len) __dynamic_array(u8, buf, buf_len) - __field(int ret) + __field(int, ret) ), TP_fast_assign( -- cgit v0.10.2 From 1073ab2e9b0d45f318052a3f3690405fc04eda75 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 18 Sep 2013 15:22:17 +0200 Subject: ath10k: fix num_sends_allowed replenishing Commit e9bb0aa39 ("ath10k: delete struct ce_sendlist") broke num_sends_allowed incrementing. num_sends_allowed exceeded initial values and could overflow. This code was supposed to replenish num_sends_allowed for partial sendlist items (i.e. before final sendlist item from a sendlist was completed and could be processed by completion handlers). Fortunately it seems it did not cause any major breakage, yet. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index f1faf46..dff23d9 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -626,10 +626,6 @@ static void ath10k_pci_ce_send_done(struct ath10k_ce_pipe *ce_state) while (ath10k_ce_completed_send_next(ce_state, &transfer_context, &ce_data, &nbytes, &transfer_id) == 0) { - spin_lock_bh(&pipe_info->pipe_lock); - pipe_info->num_sends_allowed++; - spin_unlock_bh(&pipe_info->pipe_lock); - compl = get_free_compl(pipe_info); if (!compl) break; -- cgit v0.10.2 From 0945baf7d4245b79e01c2a790186c41fb4b27dd2 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 18 Sep 2013 14:43:18 +0200 Subject: ath10k: use num_pending_tx instead of msdu id bitmap It's more efficient to simply check num_pending_tx value instead of traversing whole bitmap of msdu ids. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 11aa13e..5a56833 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -2853,8 +2853,7 @@ static void ath10k_flush(struct ieee80211_hw *hw, u32 queues, bool drop) bool empty; spin_lock_bh(&ar->htt.tx_lock); - empty = bitmap_empty(ar->htt.used_msdu_ids, - ar->htt.max_num_pending_tx); + empty = (ar->htt.num_pending_tx == 0); spin_unlock_bh(&ar->htt.tx_lock); skip = (ar->state == ATH10K_STATE_WEDGED); diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index 68b6fae..37b8196 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -96,7 +96,7 @@ exit: htt->pending_tx[ATH10K_SKB_CB(txdesc)->htt.msdu_id] = NULL; ath10k_htt_tx_free_msdu_id(htt, ATH10K_SKB_CB(txdesc)->htt.msdu_id); __ath10k_htt_tx_dec_pending(htt); - if (bitmap_empty(htt->used_msdu_ids, htt->max_num_pending_tx)) + if (htt->num_pending_tx == 0) wake_up(&htt->empty_tx_wq); spin_unlock_bh(&htt->tx_lock); -- cgit v0.10.2 From 27bb178dae7b8165ffe7028fbd6f616fb7157c6d Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 18 Sep 2013 14:43:19 +0200 Subject: ath10k: avoid needless memset on TX path This reduces number of memory accesses and hopefully contributes to better performance in the future. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htc.c b/drivers/net/wireless/ath/ath10k/htc.c index d0d7212..3118d75 100644 --- a/drivers/net/wireless/ath/ath10k/htc.c +++ b/drivers/net/wireless/ath/ath10k/htc.c @@ -103,10 +103,10 @@ static void ath10k_htc_prepare_tx_skb(struct ath10k_htc_ep *ep, struct ath10k_htc_hdr *hdr; hdr = (struct ath10k_htc_hdr *)skb->data; - memset(hdr, 0, sizeof(*hdr)); hdr->eid = ep->eid; hdr->len = __cpu_to_le16(skb->len - sizeof(*hdr)); + hdr->flags = 0; spin_lock_bh(&ep->htc->tx_lock); hdr->seq_no = ep->seq_no++; diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index 4548128..c4bbf74 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -384,9 +384,11 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) /* refcount is decremented by HTC and HTT completions until it reaches * zero and is freed */ skb_cb = ATH10K_SKB_CB(txdesc); + skb_cb->htt.is_conf = false; skb_cb->htt.msdu_id = msdu_id; skb_cb->htt.refcount = 2; skb_cb->htt.msdu = msdu; + skb_cb->htt.txfrag = NULL; res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc); if (res) @@ -505,7 +507,6 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) skb_put(txdesc, desc_len); cmd = (struct htt_cmd *)txdesc->data; - memset(cmd, 0, desc_len); tid = ATH10K_SKB_CB(msdu)->htt.tid; @@ -555,6 +556,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) /* refcount is decremented by HTC and HTT completions until it reaches * zero and is freed */ skb_cb = ATH10K_SKB_CB(txdesc); + skb_cb->htt.is_conf = false; skb_cb->htt.msdu_id = msdu_id; skb_cb->htt.refcount = 2; skb_cb->htt.txfrag = txfrag; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 5a56833..0d367e4 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1757,7 +1757,9 @@ static void ath10k_tx(struct ieee80211_hw *hw, ath10k_tx_h_seq_no(skb); } - memset(ATH10K_SKB_CB(skb), 0, sizeof(*ATH10K_SKB_CB(skb))); + ATH10K_SKB_CB(skb)->is_mapped = false; + ATH10K_SKB_CB(skb)->is_aborted = false; + ATH10K_SKB_CB(skb)->htt.is_offchan = false; ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id; ATH10K_SKB_CB(skb)->htt.tid = tid; diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index 37b8196..f6fed31 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -75,7 +75,6 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc) ath10k_report_offchan_tx(htt->ar, msdu); info = IEEE80211_SKB_CB(msdu); - memset(&info->status, 0, sizeof(info->status)); if (ATH10K_SKB_CB(txdesc)->htt.discard) { ieee80211_free_txskb(htt->ar->hw, msdu); -- cgit v0.10.2 From 0a89f8a01d0b28ca646f3aae9ffe1a7fc9d5b266 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 18 Sep 2013 14:43:20 +0200 Subject: ath10k: decouple HTT TX completions Until now the all MSDU transfer related structures were freed when all resources were unreferenced. Now HTC transfer is freed independently and HTT transfer is so too. This yields a way more simpler ath10k_skb_cb and should possibly enable parallel pipe processing (which is now serialized in ath10k_pci_process_ce routine). Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index fcf94ee..4563f80 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -52,18 +52,10 @@ struct ath10k_skb_cb { struct { u8 vdev_id; - u16 msdu_id; u8 tid; bool is_offchan; - bool is_conf; - bool discard; - bool no_ack; - u8 refcount; struct sk_buff *txfrag; - struct sk_buff *msdu; } __packed htt; - - /* 4 bytes left on 64bit arch */ } __packed; static inline struct ath10k_skb_cb *ATH10K_SKB_CB(struct sk_buff *skb) diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index a39fbf4..62ea9c8 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -1140,7 +1140,7 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) break; } - ath10k_txrx_tx_completed(htt, &tx_done); + ath10k_txrx_tx_unref(htt, &tx_done); break; } case HTT_T2H_MSG_TYPE_TX_COMPL_IND: { @@ -1174,7 +1174,7 @@ void ath10k_htt_t2h_msg_handler(struct ath10k *ar, struct sk_buff *skb) for (i = 0; i < resp->data_tx_completion.num_msdus; i++) { msdu_id = resp->data_tx_completion.msdus[i]; tx_done.msdu_id = __le16_to_cpu(msdu_id); - ath10k_txrx_tx_completed(htt, &tx_done); + ath10k_txrx_tx_unref(htt, &tx_done); } break; } diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index c4bbf74..06946d2 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -117,7 +117,7 @@ int ath10k_htt_tx_attach(struct ath10k_htt *htt) static void ath10k_htt_tx_cleanup_pending(struct ath10k_htt *htt) { - struct sk_buff *txdesc; + struct htt_tx_done tx_done = {0}; int msdu_id; /* No locks needed. Called after communication with the device has @@ -127,18 +127,13 @@ static void ath10k_htt_tx_cleanup_pending(struct ath10k_htt *htt) if (!test_bit(msdu_id, htt->used_msdu_ids)) continue; - txdesc = htt->pending_tx[msdu_id]; - if (!txdesc) - continue; - ath10k_dbg(ATH10K_DBG_HTT, "force cleanup msdu_id %hu\n", msdu_id); - if (ATH10K_SKB_CB(txdesc)->htt.refcount > 0) - ATH10K_SKB_CB(txdesc)->htt.refcount = 1; + tx_done.discard = 1; + tx_done.msdu_id = msdu_id; - ATH10K_SKB_CB(txdesc)->htt.discard = true; - ath10k_txrx_tx_unref(htt, txdesc); + ath10k_txrx_tx_unref(htt, &tx_done); } } @@ -152,26 +147,7 @@ void ath10k_htt_tx_detach(struct ath10k_htt *htt) void ath10k_htt_htc_tx_complete(struct ath10k *ar, struct sk_buff *skb) { - struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(skb); - struct ath10k_htt *htt = &ar->htt; - - if (skb_cb->htt.is_conf) { - dev_kfree_skb_any(skb); - return; - } - - if (skb_cb->is_aborted) { - skb_cb->htt.discard = true; - - /* if the skbuff is aborted we need to make sure we'll free up - * the tx resources, we can't simply run tx_unref() 2 times - * because if htt tx completion came in earlier we'd access - * unallocated memory */ - if (skb_cb->htt.refcount > 1) - skb_cb->htt.refcount = 1; - } - - ath10k_txrx_tx_unref(htt, skb); + dev_kfree_skb_any(skb); } int ath10k_htt_h2t_ver_req_msg(struct ath10k_htt *htt) @@ -192,8 +168,6 @@ int ath10k_htt_h2t_ver_req_msg(struct ath10k_htt *htt) cmd = (struct htt_cmd *)skb->data; cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_VERSION_REQ; - ATH10K_SKB_CB(skb)->htt.is_conf = true; - ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb); if (ret) { dev_kfree_skb_any(skb); @@ -233,8 +207,6 @@ int ath10k_htt_h2t_stats_req(struct ath10k_htt *htt, u8 mask, u64 cookie) req->cookie_lsb = cpu_to_le32(cookie & 0xffffffff); req->cookie_msb = cpu_to_le32((cookie & 0xffffffff00000000ULL) >> 32); - ATH10K_SKB_CB(skb)->htt.is_conf = true; - ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb); if (ret) { ath10k_warn("failed to send htt type stats request: %d", ret); @@ -321,8 +293,6 @@ int ath10k_htt_send_rx_ring_cfg_ll(struct ath10k_htt *htt) #undef desc_offset - ATH10K_SKB_CB(skb)->htt.is_conf = true; - ret = ath10k_htc_send(&htt->ar->htc, htt->eid, skb); if (ret) { dev_kfree_skb_any(skb); @@ -335,7 +305,6 @@ int ath10k_htt_send_rx_ring_cfg_ll(struct ath10k_htt *htt) int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) { struct device *dev = htt->ar->dev; - struct ath10k_skb_cb *skb_cb; struct sk_buff *txdesc = NULL; struct htt_cmd *cmd; u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id; @@ -364,7 +333,7 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) res = msdu_id; goto err; } - htt->pending_tx[msdu_id] = txdesc; + htt->pending_tx[msdu_id] = msdu; spin_unlock_bh(&htt->tx_lock); res = ath10k_skb_map(dev, msdu); @@ -381,15 +350,6 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) memcpy(cmd->mgmt_tx.hdr, msdu->data, min_t(int, msdu->len, HTT_MGMT_FRM_HDR_DOWNLOAD_LEN)); - /* refcount is decremented by HTC and HTT completions until it reaches - * zero and is freed */ - skb_cb = ATH10K_SKB_CB(txdesc); - skb_cb->htt.is_conf = false; - skb_cb->htt.msdu_id = msdu_id; - skb_cb->htt.refcount = 2; - skb_cb->htt.msdu = msdu; - skb_cb->htt.txfrag = NULL; - res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc); if (res) goto err; @@ -417,7 +377,6 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) struct htt_cmd *cmd; struct htt_data_tx_desc_frag *tx_frags; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data; - struct ath10k_skb_cb *skb_cb; struct sk_buff *txdesc = NULL; struct sk_buff *txfrag = NULL; u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id; @@ -470,7 +429,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) res = msdu_id; goto err; } - htt->pending_tx[msdu_id] = txdesc; + htt->pending_tx[msdu_id] = msdu; spin_unlock_bh(&htt->tx_lock); res = ath10k_skb_map(dev, msdu); @@ -553,15 +512,6 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) memcpy(cmd->data_tx.prefetch, msdu->data, prefetch_len); - /* refcount is decremented by HTC and HTT completions until it reaches - * zero and is freed */ - skb_cb = ATH10K_SKB_CB(txdesc); - skb_cb->htt.is_conf = false; - skb_cb->htt.msdu_id = msdu_id; - skb_cb->htt.refcount = 2; - skb_cb->htt.txfrag = txfrag; - skb_cb->htt.msdu = msdu; - res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc); if (res) goto err; diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 0d367e4..9112e6d6f 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -1757,8 +1757,6 @@ static void ath10k_tx(struct ieee80211_hw *hw, ath10k_tx_h_seq_no(skb); } - ATH10K_SKB_CB(skb)->is_mapped = false; - ATH10K_SKB_CB(skb)->is_aborted = false; ATH10K_SKB_CB(skb)->htt.is_offchan = false; ATH10K_SKB_CB(skb)->htt.vdev_id = vdev_id; ATH10K_SKB_CB(skb)->htt.tid = tid; diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index f6fed31..15395af 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -44,21 +44,25 @@ out: spin_unlock_bh(&ar->data_lock); } -void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc) +void ath10k_txrx_tx_unref(struct ath10k_htt *htt, + const struct htt_tx_done *tx_done) { struct device *dev = htt->ar->dev; struct ieee80211_tx_info *info; - struct sk_buff *txfrag = ATH10K_SKB_CB(txdesc)->htt.txfrag; - struct sk_buff *msdu = ATH10K_SKB_CB(txdesc)->htt.msdu; + struct sk_buff *msdu, *txfrag; int ret; - if (ATH10K_SKB_CB(txdesc)->htt.refcount == 0) - return; - - ATH10K_SKB_CB(txdesc)->htt.refcount--; + ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion msdu_id %u discard %d no_ack %d\n", + tx_done->msdu_id, !!tx_done->discard, !!tx_done->no_ack); - if (ATH10K_SKB_CB(txdesc)->htt.refcount > 0) + if (tx_done->msdu_id >= htt->max_num_pending_tx) { + ath10k_warn("warning: msdu_id %d too big, ignoring\n", + tx_done->msdu_id); return; + } + + msdu = htt->pending_tx[tx_done->msdu_id]; + txfrag = ATH10K_SKB_CB(msdu)->htt.txfrag; if (txfrag) { ret = ath10k_skb_unmap(dev, txfrag); @@ -76,7 +80,7 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc) info = IEEE80211_SKB_CB(msdu); - if (ATH10K_SKB_CB(txdesc)->htt.discard) { + if (tx_done->discard) { ieee80211_free_txskb(htt->ar->hw, msdu); goto exit; } @@ -84,7 +88,7 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc) if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) info->flags |= IEEE80211_TX_STAT_ACK; - if (ATH10K_SKB_CB(txdesc)->htt.no_ack) + if (tx_done->no_ack) info->flags &= ~IEEE80211_TX_STAT_ACK; ieee80211_tx_status(htt->ar->hw, msdu); @@ -92,36 +96,12 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc) exit: spin_lock_bh(&htt->tx_lock); - htt->pending_tx[ATH10K_SKB_CB(txdesc)->htt.msdu_id] = NULL; - ath10k_htt_tx_free_msdu_id(htt, ATH10K_SKB_CB(txdesc)->htt.msdu_id); + htt->pending_tx[tx_done->msdu_id] = NULL; + ath10k_htt_tx_free_msdu_id(htt, tx_done->msdu_id); __ath10k_htt_tx_dec_pending(htt); if (htt->num_pending_tx == 0) wake_up(&htt->empty_tx_wq); spin_unlock_bh(&htt->tx_lock); - - dev_kfree_skb_any(txdesc); -} - -void ath10k_txrx_tx_completed(struct ath10k_htt *htt, - const struct htt_tx_done *tx_done) -{ - struct sk_buff *txdesc; - - ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion msdu_id %u discard %d no_ack %d\n", - tx_done->msdu_id, !!tx_done->discard, !!tx_done->no_ack); - - if (tx_done->msdu_id >= htt->max_num_pending_tx) { - ath10k_warn("warning: msdu_id %d too big, ignoring\n", - tx_done->msdu_id); - return; - } - - txdesc = htt->pending_tx[tx_done->msdu_id]; - - ATH10K_SKB_CB(txdesc)->htt.discard = tx_done->discard; - ATH10K_SKB_CB(txdesc)->htt.no_ack = tx_done->no_ack; - - ath10k_txrx_tx_unref(htt, txdesc); } static const u8 rx_legacy_rate_idx[] = { diff --git a/drivers/net/wireless/ath/ath10k/txrx.h b/drivers/net/wireless/ath/ath10k/txrx.h index e78632a..356dc9c 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.h +++ b/drivers/net/wireless/ath/ath10k/txrx.h @@ -19,9 +19,8 @@ #include "htt.h" -void ath10k_txrx_tx_unref(struct ath10k_htt *htt, struct sk_buff *txdesc); -void ath10k_txrx_tx_completed(struct ath10k_htt *htt, - const struct htt_tx_done *tx_done); +void ath10k_txrx_tx_unref(struct ath10k_htt *htt, + const struct htt_tx_done *tx_done); void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info); struct ath10k_peer *ath10k_peer_find(struct ath10k *ar, int vdev_id, -- cgit v0.10.2 From 2f3773bcaf9fbf3ddb9d4315e3a3ca5e4b376cef Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 18 Sep 2013 14:43:21 +0200 Subject: ath10k: cleanup HTT TX functions Use a saner goto scheme for failure handling. Also group operations more sensibly. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index 06946d2..5e738d8 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -315,30 +315,30 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) res = ath10k_htt_tx_inc_pending(htt); if (res) - return res; + goto err; len += sizeof(cmd->hdr); len += sizeof(cmd->mgmt_tx); - txdesc = ath10k_htc_alloc_skb(len); - if (!txdesc) { - res = -ENOMEM; - goto err; - } - spin_lock_bh(&htt->tx_lock); - msdu_id = ath10k_htt_tx_alloc_msdu_id(htt); - if (msdu_id < 0) { + res = ath10k_htt_tx_alloc_msdu_id(htt); + if (res < 0) { spin_unlock_bh(&htt->tx_lock); - res = msdu_id; - goto err; + goto err_tx_dec; } + msdu_id = res; htt->pending_tx[msdu_id] = msdu; spin_unlock_bh(&htt->tx_lock); + txdesc = ath10k_htc_alloc_skb(len); + if (!txdesc) { + res = -ENOMEM; + goto err_free_msdu_id; + } + res = ath10k_skb_map(dev, msdu); if (res) - goto err; + goto err_free_txdesc; skb_put(txdesc, len); cmd = (struct htt_cmd *)txdesc->data; @@ -352,22 +352,22 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc); if (res) - goto err; + goto err_unmap_msdu; return 0; -err: +err_unmap_msdu: ath10k_skb_unmap(dev, msdu); - - if (txdesc) - dev_kfree_skb_any(txdesc); - if (msdu_id >= 0) { - spin_lock_bh(&htt->tx_lock); - htt->pending_tx[msdu_id] = NULL; - ath10k_htt_tx_free_msdu_id(htt, msdu_id); - spin_unlock_bh(&htt->tx_lock); - } +err_free_txdesc: + dev_kfree_skb_any(txdesc); +err_free_msdu_id: + spin_lock_bh(&htt->tx_lock); + htt->pending_tx[msdu_id] = NULL; + ath10k_htt_tx_free_msdu_id(htt, msdu_id); + spin_unlock_bh(&htt->tx_lock); +err_tx_dec: ath10k_htt_tx_dec_pending(htt); +err: return res; } @@ -379,6 +379,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data; struct sk_buff *txdesc = NULL; struct sk_buff *txfrag = NULL; + bool use_frags; u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id; u8 tid; int prefetch_len, desc_len, frag_len; @@ -390,7 +391,17 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) res = ath10k_htt_tx_inc_pending(htt); if (res) - return res; + goto err; + + spin_lock_bh(&htt->tx_lock); + res = ath10k_htt_tx_alloc_msdu_id(htt); + if (res < 0) { + spin_unlock_bh(&htt->tx_lock); + goto err_tx_dec; + } + msdu_id = res; + htt->pending_tx[msdu_id] = msdu; + spin_unlock_bh(&htt->tx_lock); prefetch_len = min(htt->prefetch_len, msdu->len); prefetch_len = roundup(prefetch_len, 4); @@ -401,46 +412,34 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) txdesc = ath10k_htc_alloc_skb(desc_len); if (!txdesc) { res = -ENOMEM; - goto err; + goto err_free_msdu_id; } /* Since HTT 3.0 there is no separate mgmt tx command. However in case * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx * fragment list host driver specifies directly frame pointer. */ - if (htt->target_version_major < 3 || - !ieee80211_is_mgmt(hdr->frame_control)) { + use_frags = htt->target_version_major < 3 || + !ieee80211_is_mgmt(hdr->frame_control); + + if (use_frags) { txfrag = dev_alloc_skb(frag_len); if (!txfrag) { res = -ENOMEM; - goto err; + goto err_free_txdesc; } } if (!IS_ALIGNED((unsigned long)txdesc->data, 4)) { ath10k_warn("htt alignment check failed. dropping packet.\n"); res = -EIO; - goto err; + goto err_free_txfrag; } - spin_lock_bh(&htt->tx_lock); - msdu_id = ath10k_htt_tx_alloc_msdu_id(htt); - if (msdu_id < 0) { - spin_unlock_bh(&htt->tx_lock); - res = msdu_id; - goto err; - } - htt->pending_tx[msdu_id] = msdu; - spin_unlock_bh(&htt->tx_lock); - res = ath10k_skb_map(dev, msdu); if (res) - goto err; + goto err_free_txfrag; - /* Since HTT 3.0 there is no separate mgmt tx command. However in case - * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx - * fragment list host driver specifies directly frame pointer. */ - if (htt->target_version_major < 3 || - !ieee80211_is_mgmt(hdr->frame_control)) { + if (use_frags) { /* tx fragment list must be terminated with zero-entry */ skb_put(txfrag, frag_len); tx_frags = (struct htt_data_tx_desc_frag *)txfrag->data; @@ -451,7 +450,7 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) res = ath10k_skb_map(dev, txfrag); if (res) - goto err; + goto err_unmap_msdu; ath10k_dbg(ATH10K_DBG_HTT, "txfrag 0x%llx\n", (unsigned long long) ATH10K_SKB_CB(txfrag)->paddr); @@ -476,15 +475,11 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) flags0 |= HTT_DATA_TX_DESC_FLAGS0_NO_ENCRYPT; flags0 |= HTT_DATA_TX_DESC_FLAGS0_MAC_HDR_PRESENT; - /* Since HTT 3.0 there is no separate mgmt tx command. However in case - * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx - * fragment list host driver specifies directly frame pointer. */ - if (htt->target_version_major >= 3 && - ieee80211_is_mgmt(hdr->frame_control)) - flags0 |= SM(ATH10K_HW_TXRX_MGMT, + if (use_frags) + flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI, HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); else - flags0 |= SM(ATH10K_HW_TXRX_NATIVE_WIFI, + flags0 |= SM(ATH10K_HW_TXRX_MGMT, HTT_DATA_TX_DESC_FLAGS0_PKT_TYPE); flags1 = 0; @@ -493,14 +488,10 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD; flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD; - /* Since HTT 3.0 there is no separate mgmt tx command. However in case - * of mgmt tx using TX_FRM there is not tx fragment list. Instead of tx - * fragment list host driver specifies directly frame pointer. */ - if (htt->target_version_major >= 3 && - ieee80211_is_mgmt(hdr->frame_control)) - frags_paddr = ATH10K_SKB_CB(msdu)->paddr; - else + if (use_frags) frags_paddr = ATH10K_SKB_CB(txfrag)->paddr; + else + frags_paddr = ATH10K_SKB_CB(msdu)->paddr; cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_TX_FRM; cmd->data_tx.flags0 = flags0; @@ -514,23 +505,27 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc); if (res) - goto err; + goto err_restore; return 0; -err: - if (txfrag) + +err_restore: + if (use_frags) ath10k_skb_unmap(dev, txfrag); - if (txdesc) - dev_kfree_skb_any(txdesc); - if (txfrag) +err_unmap_msdu: + ath10k_skb_unmap(dev, msdu); +err_free_txfrag: + if (use_frags) dev_kfree_skb_any(txfrag); - if (msdu_id >= 0) { - spin_lock_bh(&htt->tx_lock); - htt->pending_tx[msdu_id] = NULL; - ath10k_htt_tx_free_msdu_id(htt, msdu_id); - spin_unlock_bh(&htt->tx_lock); - } +err_free_txdesc: + dev_kfree_skb_any(txdesc); +err_free_msdu_id: + spin_lock_bh(&htt->tx_lock); + htt->pending_tx[msdu_id] = NULL; + ath10k_htt_tx_free_msdu_id(htt, msdu_id); + spin_unlock_bh(&htt->tx_lock); +err_tx_dec: ath10k_htt_tx_dec_pending(htt); - ath10k_skb_unmap(dev, msdu); +err: return res; } -- cgit v0.10.2 From 1f8bb1518eee321d94477ca7bcbb153c47d43ba4 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Wed, 18 Sep 2013 14:43:22 +0200 Subject: ath10k: use msdu headroom to store txfrag Instead of allocating sk_buff for a mere 16-byte tx fragment list buffer use headroom of the original msdu sk_buff. This decreases CPU cache pressure and improves performance. Measured improvement on AP135 is 560mbps -> 590mbps of UDP TX briding traffic. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 4563f80..292ad45 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -54,7 +54,9 @@ struct ath10k_skb_cb { u8 vdev_id; u8 tid; bool is_offchan; - struct sk_buff *txfrag; + + u8 frag_len; + u8 pad_len; } __packed htt; } __packed; diff --git a/drivers/net/wireless/ath/ath10k/htt_tx.c b/drivers/net/wireless/ath/ath10k/htt_tx.c index 5e738d8..3b93c6a 100644 --- a/drivers/net/wireless/ath/ath10k/htt_tx.c +++ b/drivers/net/wireless/ath/ath10k/htt_tx.c @@ -307,7 +307,8 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) struct device *dev = htt->ar->dev; struct sk_buff *txdesc = NULL; struct htt_cmd *cmd; - u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id; + struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu); + u8 vdev_id = skb_cb->htt.vdev_id; int len = 0; int msdu_id = -1; int res; @@ -350,6 +351,9 @@ int ath10k_htt_mgmt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) memcpy(cmd->mgmt_tx.hdr, msdu->data, min_t(int, msdu->len, HTT_MGMT_FRM_HDR_DOWNLOAD_LEN)); + skb_cb->htt.frag_len = 0; + skb_cb->htt.pad_len = 0; + res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc); if (res) goto err_unmap_msdu; @@ -377,13 +381,12 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) struct htt_cmd *cmd; struct htt_data_tx_desc_frag *tx_frags; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)msdu->data; + struct ath10k_skb_cb *skb_cb = ATH10K_SKB_CB(msdu); struct sk_buff *txdesc = NULL; - struct sk_buff *txfrag = NULL; bool use_frags; u8 vdev_id = ATH10K_SKB_CB(msdu)->htt.vdev_id; u8 tid; - int prefetch_len, desc_len, frag_len; - dma_addr_t frags_paddr; + int prefetch_len, desc_len; int msdu_id = -1; int res; u8 flags0; @@ -407,7 +410,6 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) prefetch_len = roundup(prefetch_len, 4); desc_len = sizeof(cmd->hdr) + sizeof(cmd->data_tx) + prefetch_len; - frag_len = sizeof(*tx_frags) * 2; txdesc = ath10k_htc_alloc_skb(desc_len); if (!txdesc) { @@ -421,41 +423,44 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) use_frags = htt->target_version_major < 3 || !ieee80211_is_mgmt(hdr->frame_control); - if (use_frags) { - txfrag = dev_alloc_skb(frag_len); - if (!txfrag) { - res = -ENOMEM; - goto err_free_txdesc; - } - } - if (!IS_ALIGNED((unsigned long)txdesc->data, 4)) { ath10k_warn("htt alignment check failed. dropping packet.\n"); res = -EIO; - goto err_free_txfrag; + goto err_free_txdesc; + } + + if (use_frags) { + skb_cb->htt.frag_len = sizeof(*tx_frags) * 2; + skb_cb->htt.pad_len = (unsigned long)msdu->data - + round_down((unsigned long)msdu->data, 4); + + skb_push(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len); + } else { + skb_cb->htt.frag_len = 0; + skb_cb->htt.pad_len = 0; } res = ath10k_skb_map(dev, msdu); if (res) - goto err_free_txfrag; + goto err_pull_txfrag; if (use_frags) { + dma_sync_single_for_cpu(dev, skb_cb->paddr, msdu->len, + DMA_TO_DEVICE); + /* tx fragment list must be terminated with zero-entry */ - skb_put(txfrag, frag_len); - tx_frags = (struct htt_data_tx_desc_frag *)txfrag->data; - tx_frags[0].paddr = __cpu_to_le32(ATH10K_SKB_CB(msdu)->paddr); - tx_frags[0].len = __cpu_to_le32(msdu->len); + tx_frags = (struct htt_data_tx_desc_frag *)msdu->data; + tx_frags[0].paddr = __cpu_to_le32(skb_cb->paddr + + skb_cb->htt.frag_len + + skb_cb->htt.pad_len); + tx_frags[0].len = __cpu_to_le32(msdu->len - + skb_cb->htt.frag_len - + skb_cb->htt.pad_len); tx_frags[1].paddr = __cpu_to_le32(0); tx_frags[1].len = __cpu_to_le32(0); - res = ath10k_skb_map(dev, txfrag); - if (res) - goto err_unmap_msdu; - - ath10k_dbg(ATH10K_DBG_HTT, "txfrag 0x%llx\n", - (unsigned long long) ATH10K_SKB_CB(txfrag)->paddr); - ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "txfrag: ", - txfrag->data, frag_len); + dma_sync_single_for_device(dev, skb_cb->paddr, msdu->len, + DMA_TO_DEVICE); } ath10k_dbg(ATH10K_DBG_HTT, "msdu 0x%llx\n", @@ -488,35 +493,28 @@ int ath10k_htt_tx(struct ath10k_htt *htt, struct sk_buff *msdu) flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L3_OFFLOAD; flags1 |= HTT_DATA_TX_DESC_FLAGS1_CKSUM_L4_OFFLOAD; - if (use_frags) - frags_paddr = ATH10K_SKB_CB(txfrag)->paddr; - else - frags_paddr = ATH10K_SKB_CB(msdu)->paddr; - cmd->hdr.msg_type = HTT_H2T_MSG_TYPE_TX_FRM; cmd->data_tx.flags0 = flags0; cmd->data_tx.flags1 = __cpu_to_le16(flags1); - cmd->data_tx.len = __cpu_to_le16(msdu->len); + cmd->data_tx.len = __cpu_to_le16(msdu->len - + skb_cb->htt.frag_len - + skb_cb->htt.pad_len); cmd->data_tx.id = __cpu_to_le16(msdu_id); - cmd->data_tx.frags_paddr = __cpu_to_le32(frags_paddr); + cmd->data_tx.frags_paddr = __cpu_to_le32(skb_cb->paddr); cmd->data_tx.peerid = __cpu_to_le32(HTT_INVALID_PEERID); - memcpy(cmd->data_tx.prefetch, msdu->data, prefetch_len); + memcpy(cmd->data_tx.prefetch, hdr, prefetch_len); res = ath10k_htc_send(&htt->ar->htc, htt->eid, txdesc); if (res) - goto err_restore; + goto err_unmap_msdu; return 0; -err_restore: - if (use_frags) - ath10k_skb_unmap(dev, txfrag); err_unmap_msdu: ath10k_skb_unmap(dev, msdu); -err_free_txfrag: - if (use_frags) - dev_kfree_skb_any(txfrag); +err_pull_txfrag: + skb_pull(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len); err_free_txdesc: dev_kfree_skb_any(txdesc); err_free_msdu_id: diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 9112e6d6f..99a9bad 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -3342,6 +3342,10 @@ int ath10k_mac_register(struct ath10k *ar) IEEE80211_HW_WANT_MONITOR_VIF | IEEE80211_HW_AP_LINK_PS; + /* MSDU can have HTT TX fragment pushed in front. The additional 4 + * bytes is used for padding/alignment if necessary. */ + ar->hw->extra_tx_headroom += sizeof(struct htt_data_tx_desc_frag)*2 + 4; + if (ar->ht_cap_info & WMI_HT_CAP_DYNAMIC_SMPS) ar->hw->flags |= IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS; diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index 15395af..57931d0 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -49,7 +49,8 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt, { struct device *dev = htt->ar->dev; struct ieee80211_tx_info *info; - struct sk_buff *msdu, *txfrag; + struct ath10k_skb_cb *skb_cb; + struct sk_buff *msdu; int ret; ath10k_dbg(ATH10K_DBG_HTT, "htt tx completion msdu_id %u discard %d no_ack %d\n", @@ -62,20 +63,15 @@ void ath10k_txrx_tx_unref(struct ath10k_htt *htt, } msdu = htt->pending_tx[tx_done->msdu_id]; - txfrag = ATH10K_SKB_CB(msdu)->htt.txfrag; - - if (txfrag) { - ret = ath10k_skb_unmap(dev, txfrag); - if (ret) - ath10k_warn("txfrag unmap failed (%d)\n", ret); - - dev_kfree_skb_any(txfrag); - } + skb_cb = ATH10K_SKB_CB(msdu); ret = ath10k_skb_unmap(dev, msdu); if (ret) ath10k_warn("data skb unmap failed (%d)\n", ret); + if (skb_cb->htt.frag_len) + skb_pull(msdu, skb_cb->htt.frag_len + skb_cb->htt.pad_len); + ath10k_report_offchan_tx(htt->ar, msdu); info = IEEE80211_SKB_CB(msdu); -- cgit v0.10.2 From 941247f910953d6b0649c81f6cb446110438afae Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 22 Sep 2013 20:44:10 +0200 Subject: Bluetooth: Fix assignment of 0/1 to bool variables Convert 0 to false and 1 to true when assigning values to bool variables. Inspired by commit 3db1cd5c05f35fb43eb134df6f321de4e63141f2. The simplified semantic patch that find this problem is as follows (http://coccinelle.lip6.fr/): @@ bool b; @@ ( -b = 0 +b = false | -b = 1 +b = true ) Signed-off-by: Peter Senna Tschudin Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 636a3b4..6888480 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -5797,7 +5797,7 @@ static int l2cap_rx_state_recv(struct l2cap_chan *chan, struct sk_buff *skb, u8 event) { int err = 0; - bool skb_in_use = 0; + bool skb_in_use = false; BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb, event); @@ -5818,7 +5818,7 @@ static int l2cap_rx_state_recv(struct l2cap_chan *chan, control->txseq); chan->buffer_seq = chan->expected_tx_seq; - skb_in_use = 1; + skb_in_use = true; err = l2cap_reassemble_sdu(chan, skb, control); if (err) @@ -5854,7 +5854,7 @@ static int l2cap_rx_state_recv(struct l2cap_chan *chan, * current frame is stored for later use. */ skb_queue_tail(&chan->srej_q, skb); - skb_in_use = 1; + skb_in_use = true; BT_DBG("Queued %p (queue len %d)", skb, skb_queue_len(&chan->srej_q)); @@ -5932,7 +5932,7 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan, { int err = 0; u16 txseq = control->txseq; - bool skb_in_use = 0; + bool skb_in_use = false; BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb, event); @@ -5944,7 +5944,7 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan, /* Keep frame for reassembly later */ l2cap_pass_to_tx(chan, control); skb_queue_tail(&chan->srej_q, skb); - skb_in_use = 1; + skb_in_use = true; BT_DBG("Queued %p (queue len %d)", skb, skb_queue_len(&chan->srej_q)); @@ -5955,7 +5955,7 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan, l2cap_pass_to_tx(chan, control); skb_queue_tail(&chan->srej_q, skb); - skb_in_use = 1; + skb_in_use = true; BT_DBG("Queued %p (queue len %d)", skb, skb_queue_len(&chan->srej_q)); @@ -5970,7 +5970,7 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan, * the missing frames. */ skb_queue_tail(&chan->srej_q, skb); - skb_in_use = 1; + skb_in_use = true; BT_DBG("Queued %p (queue len %d)", skb, skb_queue_len(&chan->srej_q)); @@ -5984,7 +5984,7 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan, * SREJ'd frames. */ skb_queue_tail(&chan->srej_q, skb); - skb_in_use = 1; + skb_in_use = true; BT_DBG("Queued %p (queue len %d)", skb, skb_queue_len(&chan->srej_q)); -- cgit v0.10.2 From 0fba96f97bba73469dd952319fddc4a3cc99dd97 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 25 Sep 2013 13:26:04 +0300 Subject: Bluetooth: Add clarifying comment to bt_sock_wait_state() The bt_sock_wait_state requires the sk lock to be held (through lock_sock) so document it clearly in the code. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/af_bluetooth.c b/net/bluetooth/af_bluetooth.c index c600631..e6e1278 100644 --- a/net/bluetooth/af_bluetooth.c +++ b/net/bluetooth/af_bluetooth.c @@ -490,6 +490,7 @@ int bt_sock_ioctl(struct socket *sock, unsigned int cmd, unsigned long arg) } EXPORT_SYMBOL(bt_sock_ioctl); +/* This function expects the sk lock to be held when called */ int bt_sock_wait_state(struct sock *sk, int state, unsigned long timeo) { DECLARE_WAITQUEUE(wait, current); -- cgit v0.10.2 From 970871bc9cb2f5f783cb7cca31ff223c44662327 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 25 Sep 2013 13:26:05 +0300 Subject: Bluetooth: Clean up socket locking in l2cap_sock_recvmsg This patch cleans up the locking login in l2cap_sock_recvmsg by pairing up each lock_sock call with a release_sock call. The function already has a "done" label that handles releasing the socket and returning from the function so the fix is rather simple. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index ad95b42..c85537c 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -805,8 +805,8 @@ static int l2cap_sock_recvmsg(struct kiocb *iocb, struct socket *sock, pi->chan->state = BT_CONFIG; __l2cap_connect_rsp_defer(pi->chan); - release_sock(sk); - return 0; + err = 0; + goto done; } release_sock(sk); -- cgit v0.10.2 From 87b95ba64efcfcf70a9f9933297994aada64cd74 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 25 Sep 2013 13:26:06 +0300 Subject: Bluetooth: Fix busy return for mgmt_set_powered in some cases We should return a "busy" error always when there is another mgmt_set_powered operation in progress. Previously when powering on while the auto off timer was still set the code could have let two or more pending power on commands to be queued. This patch fixes the issue by moving the check for duplicate commands to an earlier point in the set_powered handler. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 3070e77..85bfa21 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -807,6 +807,12 @@ static int set_powered(struct sock *sk, struct hci_dev *hdev, void *data, hci_dev_lock(hdev); + if (mgmt_pending_find(MGMT_OP_SET_POWERED, hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_SET_POWERED, + MGMT_STATUS_BUSY); + goto failed; + } + if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) { cancel_delayed_work(&hdev->power_off); @@ -823,12 +829,6 @@ static int set_powered(struct sock *sk, struct hci_dev *hdev, void *data, goto failed; } - if (mgmt_pending_find(MGMT_OP_SET_POWERED, hdev)) { - err = cmd_status(sk, hdev->id, MGMT_OP_SET_POWERED, - MGMT_STATUS_BUSY); - goto failed; - } - cmd = mgmt_pending_add(sk, MGMT_OP_SET_POWERED, hdev, data, len); if (!cmd) { err = -ENOMEM; -- cgit v0.10.2 From bd99abdd5b876406c34b872956b3237e18613566 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 25 Sep 2013 13:26:07 +0300 Subject: Bluetooth: Move mgmt response convenience functions to a better location The settings_rsp and cmd_status_rsp functions can be useful for all mgmt command handlers when asynchronous request callbacks are used. They will e.g. be used by subsequent patches to change set_le to use an async request as well as a new set_advertising command. Therefore, move them higher up in the mgmt.c file to avoid unnecessary forward declarations or mixing this trivial change with other patches. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 85bfa21..61d4b19 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -886,6 +886,36 @@ static int new_settings(struct hci_dev *hdev, struct sock *skip) return mgmt_event(MGMT_EV_NEW_SETTINGS, hdev, &ev, sizeof(ev), skip); } +struct cmd_lookup { + struct sock *sk; + struct hci_dev *hdev; + u8 mgmt_status; +}; + +static void settings_rsp(struct pending_cmd *cmd, void *data) +{ + struct cmd_lookup *match = data; + + send_settings_rsp(cmd->sk, cmd->opcode, match->hdev); + + list_del(&cmd->list); + + if (match->sk == NULL) { + match->sk = cmd->sk; + sock_hold(match->sk); + } + + mgmt_pending_free(cmd); +} + +static void cmd_status_rsp(struct pending_cmd *cmd, void *data) +{ + u8 *status = data; + + cmd_status(cmd->sk, cmd->index, cmd->opcode, *status); + mgmt_pending_remove(cmd); +} + static int set_discoverable(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { @@ -3374,14 +3404,6 @@ done: return err; } -static void cmd_status_rsp(struct pending_cmd *cmd, void *data) -{ - u8 *status = data; - - cmd_status(cmd->sk, cmd->index, cmd->opcode, *status); - mgmt_pending_remove(cmd); -} - int mgmt_index_added(struct hci_dev *hdev) { if (!mgmt_valid_hdev(hdev)) @@ -3402,28 +3424,6 @@ int mgmt_index_removed(struct hci_dev *hdev) return mgmt_event(MGMT_EV_INDEX_REMOVED, hdev, NULL, 0, NULL); } -struct cmd_lookup { - struct sock *sk; - struct hci_dev *hdev; - u8 mgmt_status; -}; - -static void settings_rsp(struct pending_cmd *cmd, void *data) -{ - struct cmd_lookup *match = data; - - send_settings_rsp(cmd->sk, cmd->opcode, match->hdev); - - list_del(&cmd->list); - - if (match->sk == NULL) { - match->sk = cmd->sk; - sock_hold(match->sk); - } - - mgmt_pending_free(cmd); -} - static void set_bredr_scan(struct hci_request *req) { struct hci_dev *hdev = req->hdev; -- cgit v0.10.2 From 416a4ae56b7a37407ca1155805c05b638f845778 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 25 Sep 2013 13:26:08 +0300 Subject: Bluetooth: Use async request for LE enable/disable This patch updates the code to use an asynchronous request for handling the enabling and disabling of LE support. This refactoring is necessary as a preparation for adding advertising support, since when LE is disabled we should also disable advertising, and the cleanest way to do this is to perform the two respective HCI commands in the same asynchronous request. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 3ede820..26cc9f7 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -1168,7 +1168,6 @@ int mgmt_set_class_of_dev_complete(struct hci_dev *hdev, u8 *dev_class, int mgmt_set_local_name_complete(struct hci_dev *hdev, u8 *name, u8 status); int mgmt_read_local_oob_data_reply_complete(struct hci_dev *hdev, u8 *hash, u8 *randomizer, u8 status); -int mgmt_le_enable_complete(struct hci_dev *hdev, u8 enable, u8 status); int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, u8 *dev_class, s8 rssi, u8 cfm_name, u8 ssp, u8 *eir, u16 eir_len); diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 94aab73..48db81f 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -994,20 +994,19 @@ static void hci_cc_write_le_host_supported(struct hci_dev *hdev, return; if (!status) { - if (sent->le) + if (sent->le) { hdev->features[1][0] |= LMP_HOST_LE; - else + set_bit(HCI_LE_ENABLED, &hdev->dev_flags); + } else { hdev->features[1][0] &= ~LMP_HOST_LE; + clear_bit(HCI_LE_ENABLED, &hdev->dev_flags); + } if (sent->simul) hdev->features[1][0] |= LMP_HOST_LE_BREDR; else hdev->features[1][0] &= ~LMP_HOST_LE_BREDR; } - - if (test_bit(HCI_MGMT, &hdev->dev_flags) && - !test_bit(HCI_INIT, &hdev->flags)) - mgmt_le_enable_complete(hdev, sent->le, status); } static void hci_cc_write_remote_amp_assoc(struct hci_dev *hdev, diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 61d4b19..4c3984e 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1354,11 +1354,32 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) return send_settings_rsp(sk, MGMT_OP_SET_HS, hdev); } +static void le_enable_complete(struct hci_dev *hdev, u8 status) +{ + struct cmd_lookup match = { NULL, hdev }; + + if (status) { + u8 mgmt_err = mgmt_status(status); + + mgmt_pending_foreach(MGMT_OP_SET_LE, hdev, cmd_status_rsp, + &mgmt_err); + return; + } + + mgmt_pending_foreach(MGMT_OP_SET_LE, hdev, settings_rsp, &match); + + new_settings(hdev, match.sk); + + if (match.sk) + sock_put(match.sk); +} + static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_mode *cp = data; struct hci_cp_write_le_host_supported hci_cp; struct pending_cmd *cmd; + struct hci_request req; int err; u8 val, enabled; @@ -1419,8 +1440,12 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) hci_cp.simul = lmp_le_br_capable(hdev); } - err = hci_send_cmd(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(hci_cp), - &hci_cp); + hci_req_init(&req, hdev); + + hci_req_add(&req, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(hci_cp), + &hci_cp); + + err = hci_req_run(&req, le_enable_complete); if (err < 0) mgmt_pending_remove(cmd); @@ -4141,44 +4166,6 @@ int mgmt_read_local_oob_data_reply_complete(struct hci_dev *hdev, u8 *hash, return err; } -int mgmt_le_enable_complete(struct hci_dev *hdev, u8 enable, u8 status) -{ - struct cmd_lookup match = { NULL, hdev }; - bool changed = false; - int err = 0; - - if (status) { - u8 mgmt_err = mgmt_status(status); - - if (enable && test_and_clear_bit(HCI_LE_ENABLED, - &hdev->dev_flags)) - err = new_settings(hdev, NULL); - - mgmt_pending_foreach(MGMT_OP_SET_LE, hdev, cmd_status_rsp, - &mgmt_err); - - return err; - } - - if (enable) { - if (!test_and_set_bit(HCI_LE_ENABLED, &hdev->dev_flags)) - changed = true; - } else { - if (test_and_clear_bit(HCI_LE_ENABLED, &hdev->dev_flags)) - changed = true; - } - - mgmt_pending_foreach(MGMT_OP_SET_LE, hdev, settings_rsp, &match); - - if (changed) - err = new_settings(hdev, match.sk); - - if (match.sk) - sock_put(match.sk); - - return err; -} - int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type, u8 addr_type, u8 *dev_class, s8 rssi, u8 cfm_name, u8 ssp, u8 *eir, u16 eir_len) -- cgit v0.10.2 From eeca6f891305a80378da978f803821c2a0b648b6 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 25 Sep 2013 13:26:09 +0300 Subject: Bluetooth: Add new mgmt setting for LE advertising This patch adds a new mgmt setting for LE advertising and hooks up the necessary places in the mgmt code to operate on the HCI_LE_PERIPHERAL flag (which corresponds to this setting). This patch does not yet add any new command for enabling the setting - that is left for a subsequent patch. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 9944c3e..6cc72b6 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -93,6 +93,7 @@ struct mgmt_rp_read_index_list { #define MGMT_SETTING_BREDR 0x00000080 #define MGMT_SETTING_HS 0x00000100 #define MGMT_SETTING_LE 0x00000200 +#define MGMT_SETTING_ADVERTISING 0x00000400 #define MGMT_OP_READ_INFO 0x0004 #define MGMT_READ_INFO_SIZE 0 diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index 48db81f..917c7c8 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -1000,6 +1000,7 @@ static void hci_cc_write_le_host_supported(struct hci_dev *hdev, } else { hdev->features[1][0] &= ~LMP_HOST_LE; clear_bit(HCI_LE_ENABLED, &hdev->dev_flags); + clear_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags); } if (sent->simul) diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4c3984e..9a2faa3 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -384,8 +384,10 @@ static u32 get_supported_settings(struct hci_dev *hdev) if (enable_hs) settings |= MGMT_SETTING_HS; - if (lmp_le_capable(hdev)) + if (lmp_le_capable(hdev)) { settings |= MGMT_SETTING_LE; + settings |= MGMT_SETTING_ADVERTISING; + } return settings; } @@ -424,6 +426,9 @@ static u32 get_current_settings(struct hci_dev *hdev) if (test_bit(HCI_HS_ENABLED, &hdev->dev_flags)) settings |= MGMT_SETTING_HS; + if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) + settings |= MGMT_SETTING_ADVERTISING; + return settings; } @@ -1411,6 +1416,11 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) changed = true; } + if (!val && test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) { + clear_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags); + changed = true; + } + err = send_settings_rsp(sk, MGMT_OP_SET_LE, hdev); if (err < 0) goto unlock; @@ -1442,6 +1452,9 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) hci_req_init(&req, hdev); + if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags) && !val) + hci_req_add(&req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(val), &val); + hci_req_add(&req, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(hci_cp), &hci_cp); @@ -3517,6 +3530,12 @@ static int powered_update_hci(struct hci_dev *hdev) sizeof(cp), &cp); } + if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) { + u8 adv = 0x01; + + hci_req_add(&req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(adv), &adv); + } + link_sec = test_bit(HCI_LINK_SECURITY, &hdev->dev_flags); if (link_sec != test_bit(HCI_AUTH, &hdev->flags)) hci_req_add(&req, HCI_OP_WRITE_AUTH_ENABLE, -- cgit v0.10.2 From 4375f1037d52602413142e290608d0d84671ad36 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 25 Sep 2013 13:26:10 +0300 Subject: Bluetooth: Add new mgmt_set_advertising command This patch adds a new mgmt command for enabling and disabling LE advertising. The command depends on the LE setting being enabled first and will return a "rejected" response otherwise. The patch also adds safeguards so that there will ever only be one set_le or set_advertising command pending per adapter. The response handling and new_settings event sending is done in an asynchronous request callback, meaning raw HCI access from user space to enable advertising (e.g. hciconfig leadv) will not trigger the new_settings event. This is intentional since trying to support mixed raw HCI and mgmt access would mean adding extra state tracking or new helper functions, essentially negating the benefit of using the asynchronous request framework. The HCI_LE_ENABLED and HCI_LE_PERIPHERAL flags however are updated correctly even with raw HCI access so this will not completely break subsequent access over mgmt. Signed-off-by: Johan Hedberg Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 6cc72b6..421d763 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -352,6 +352,8 @@ struct mgmt_cp_set_device_id { } __packed; #define MGMT_SET_DEVICE_ID_SIZE 8 +#define MGMT_OP_SET_ADVERTISING 0x0029 + #define MGMT_EV_CMD_COMPLETE 0x0001 struct mgmt_ev_cmd_complete { __le16 opcode; diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 9a2faa3..1b5b10f 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -76,6 +76,7 @@ static const u16 mgmt_commands[] = { MGMT_OP_BLOCK_DEVICE, MGMT_OP_UNBLOCK_DEVICE, MGMT_OP_SET_DEVICE_ID, + MGMT_OP_SET_ADVERTISING, }; static const u16 mgmt_events[] = { @@ -1431,7 +1432,8 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) goto unlock; } - if (mgmt_pending_find(MGMT_OP_SET_LE, hdev)) { + if (mgmt_pending_find(MGMT_OP_SET_LE, hdev) || + mgmt_pending_find(MGMT_OP_SET_ADVERTISING, hdev)) { err = cmd_status(sk, hdev->id, MGMT_OP_SET_LE, MGMT_STATUS_BUSY); goto unlock; @@ -3136,6 +3138,98 @@ static int set_device_id(struct sock *sk, struct hci_dev *hdev, void *data, return err; } +static void set_advertising_complete(struct hci_dev *hdev, u8 status) +{ + struct cmd_lookup match = { NULL, hdev }; + + if (status) { + u8 mgmt_err = mgmt_status(status); + + mgmt_pending_foreach(MGMT_OP_SET_ADVERTISING, hdev, + cmd_status_rsp, &mgmt_err); + return; + } + + mgmt_pending_foreach(MGMT_OP_SET_ADVERTISING, hdev, settings_rsp, + &match); + + new_settings(hdev, match.sk); + + if (match.sk) + sock_put(match.sk); +} + +static int set_advertising(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) +{ + struct mgmt_mode *cp = data; + struct pending_cmd *cmd; + struct hci_request req; + u8 val, enabled; + int err; + + BT_DBG("request for %s", hdev->name); + + if (!lmp_le_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING, + MGMT_STATUS_NOT_SUPPORTED); + + if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING, + MGMT_STATUS_REJECTED); + + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING, + MGMT_STATUS_INVALID_PARAMS); + + hci_dev_lock(hdev); + + val = !!cp->val; + enabled = test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags); + + if (!hdev_is_powered(hdev) || val == enabled) { + bool changed = false; + + if (val != test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) { + change_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags); + changed = true; + } + + err = send_settings_rsp(sk, MGMT_OP_SET_ADVERTISING, hdev); + if (err < 0) + goto unlock; + + if (changed) + err = new_settings(hdev, sk); + + goto unlock; + } + + if (mgmt_pending_find(MGMT_OP_SET_ADVERTISING, hdev) || + mgmt_pending_find(MGMT_OP_SET_LE, hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING, + MGMT_STATUS_BUSY); + goto unlock; + } + + cmd = mgmt_pending_add(sk, MGMT_OP_SET_ADVERTISING, hdev, data, len); + if (!cmd) { + err = -ENOMEM; + goto unlock; + } + + hci_req_init(&req, hdev); + + hci_req_add(&req, HCI_OP_LE_SET_ADV_ENABLE, sizeof(val), &val); + + err = hci_req_run(&req, set_advertising_complete); + if (err < 0) + mgmt_pending_remove(cmd); + +unlock: + hci_dev_unlock(hdev); + return err; +} + static void fast_connectable_complete(struct hci_dev *hdev, u8 status) { struct pending_cmd *cmd; @@ -3347,6 +3441,7 @@ static const struct mgmt_handler { { block_device, false, MGMT_BLOCK_DEVICE_SIZE }, { unblock_device, false, MGMT_UNBLOCK_DEVICE_SIZE }, { set_device_id, false, MGMT_SET_DEVICE_ID_SIZE }, + { set_advertising, false, MGMT_SETTING_SIZE }, }; -- cgit v0.10.2 From f6dc2095a0da8906ec65be98cfc508aaadcf5d28 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Thu, 26 Sep 2013 10:12:22 +0300 Subject: ath10k: report A-MSDU subframes individually HW reports each A-MSDU subframe as a separate sk_buff. It is impossible to configure it to behave differently. Until now ath10k was reconstructing A-MSDUs from subframes which involved a lot of memory operations. This proved to be a significant contributor to degraded RX performance. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 62ea9c8..617df96 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -41,6 +41,10 @@ /* when under memory pressure rx ring refill may fail and needs a retry */ #define HTT_RX_RING_REFILL_RETRY_MS 50 + +static int ath10k_htt_rx_get_csum_state(struct sk_buff *skb); + + static int ath10k_htt_rx_ring_size(struct ath10k_htt *htt) { int size; @@ -591,136 +595,111 @@ static bool ath10k_htt_rx_hdr_is_amsdu(struct ieee80211_hdr *hdr) return false; } -static int ath10k_htt_rx_amsdu(struct ath10k_htt *htt, - struct htt_rx_info *info) +struct rfc1042_hdr { + u8 llc_dsap; + u8 llc_ssap; + u8 llc_ctrl; + u8 snap_oui[3]; + __be16 snap_type; +} __packed; + +struct amsdu_subframe_hdr { + u8 dst[ETH_ALEN]; + u8 src[ETH_ALEN]; + __be16 len; +} __packed; + +static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt, + struct htt_rx_info *info) { struct htt_rx_desc *rxd; - struct sk_buff *amsdu; struct sk_buff *first; - struct ieee80211_hdr *hdr; struct sk_buff *skb = info->skb; enum rx_msdu_decap_format fmt; enum htt_rx_mpdu_encrypt_type enctype; + struct ieee80211_hdr *hdr; + u8 hdr_buf[64]; unsigned int hdr_len; - int crypto_len; rxd = (void *)skb->data - sizeof(*rxd); - fmt = MS(__le32_to_cpu(rxd->msdu_start.info1), - RX_MSDU_START_INFO1_DECAP_FORMAT); enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0), RX_MPDU_START_INFO0_ENCRYPT_TYPE); - /* FIXME: No idea what assumptions are safe here. Need logs */ - if ((fmt == RX_MSDU_DECAP_RAW && skb->next)) { - ath10k_htt_rx_free_msdu_chain(skb->next); - skb->next = NULL; - return -ENOTSUPP; - } + hdr = (struct ieee80211_hdr *)rxd->rx_hdr_status; + hdr_len = ieee80211_hdrlen(hdr->frame_control); + memcpy(hdr_buf, hdr, hdr_len); + hdr = (struct ieee80211_hdr *)hdr_buf; - /* A-MSDU max is a little less than 8K */ - amsdu = dev_alloc_skb(8*1024); - if (!amsdu) { - ath10k_warn("A-MSDU allocation failed\n"); - ath10k_htt_rx_free_msdu_chain(skb->next); - skb->next = NULL; - return -ENOMEM; - } - - if (fmt >= RX_MSDU_DECAP_NATIVE_WIFI) { - int hdrlen; - - hdr = (void *)rxd->rx_hdr_status; - hdrlen = ieee80211_hdrlen(hdr->frame_control); - memcpy(skb_put(amsdu, hdrlen), hdr, hdrlen); - } + /* FIXME: Hopefully this is a temporary measure. + * + * Reporting individual A-MSDU subframes means each reported frame + * shares the same sequence number. + * + * mac80211 drops frames it recognizes as duplicates, i.e. + * retransmission flag is set and sequence number matches sequence + * number from a previous frame (as per IEEE 802.11-2012: 9.3.2.10 + * "Duplicate detection and recovery") + * + * To avoid frames being dropped clear retransmission flag for all + * received A-MSDUs. + * + * Worst case: actual duplicate frames will be reported but this should + * still be handled gracefully by other OSI/ISO layers. */ + hdr->frame_control &= cpu_to_le16(~IEEE80211_FCTL_RETRY); first = skb; while (skb) { void *decap_hdr; - int decap_len = 0; + int len; rxd = (void *)skb->data - sizeof(*rxd); fmt = MS(__le32_to_cpu(rxd->msdu_start.info1), - RX_MSDU_START_INFO1_DECAP_FORMAT); + RX_MSDU_START_INFO1_DECAP_FORMAT); decap_hdr = (void *)rxd->rx_hdr_status; - if (skb == first) { - /* We receive linked A-MSDU subframe skbuffs. The - * first one contains the original 802.11 header (and - * possible crypto param) in the RX descriptor. The - * A-MSDU subframe header follows that. Each part is - * aligned to 4 byte boundary. */ - - hdr = (void *)amsdu->data; - hdr_len = ieee80211_hdrlen(hdr->frame_control); - crypto_len = ath10k_htt_rx_crypto_param_len(enctype); - - decap_hdr += roundup(hdr_len, 4); - decap_hdr += roundup(crypto_len, 4); - } - - /* When fmt == RX_MSDU_DECAP_8023_SNAP_LLC: - * - * SNAP 802.3 consists of: - * [dst:6][src:6][len:2][dsap:1][ssap:1][ctl:1][snap:5] - * [data][fcs:4]. - * - * Since this overlaps with A-MSDU header (da, sa, len) - * there's nothing extra to do. */ - - if (fmt == RX_MSDU_DECAP_ETHERNET2_DIX) { - /* Ethernet2 decap inserts ethernet header in place of - * A-MSDU subframe header. */ - skb_pull(skb, 6 + 6 + 2); - - /* A-MSDU subframe header length */ - decap_len += 6 + 6 + 2; - - /* Ethernet2 decap also strips the LLC/SNAP so we need - * to re-insert it. The LLC/SNAP follows A-MSDU - * subframe header. */ - /* FIXME: Not all LLCs are 8 bytes long */ - decap_len += 8; - - memcpy(skb_put(amsdu, decap_len), decap_hdr, decap_len); - } + skb->ip_summed = ath10k_htt_rx_get_csum_state(skb); - if (fmt == RX_MSDU_DECAP_NATIVE_WIFI) { - /* Native Wifi decap inserts regular 802.11 header - * in place of A-MSDU subframe header. */ - hdr = (struct ieee80211_hdr *)skb->data; - skb_pull(skb, ieee80211_hdrlen(hdr->frame_control)); - - /* A-MSDU subframe header length */ - decap_len += 6 + 6 + 2; - - memcpy(skb_put(amsdu, decap_len), decap_hdr, decap_len); + /* First frame in an A-MSDU chain has more decapped data. */ + if (skb == first) { + len = round_up(ieee80211_hdrlen(hdr->frame_control), 4); + len += round_up(ath10k_htt_rx_crypto_param_len(enctype), + 4); + decap_hdr += len; } - if (fmt == RX_MSDU_DECAP_RAW) - skb_trim(skb, skb->len - 4); /* remove FCS */ - - memcpy(skb_put(amsdu, skb->len), skb->data, skb->len); - - /* A-MSDU subframes are padded to 4bytes - * but relative to first subframe, not the whole MPDU */ - if (skb->next && ((decap_len + skb->len) & 3)) { - int padlen = 4 - ((decap_len + skb->len) & 3); - memset(skb_put(amsdu, padlen), 0, padlen); + switch (fmt) { + case RX_MSDU_DECAP_RAW: + skb_trim(skb, skb->len - FCS_LEN); + break; + case RX_MSDU_DECAP_NATIVE_WIFI: + break; + case RX_MSDU_DECAP_ETHERNET2_DIX: + len = 0; + len += sizeof(struct rfc1042_hdr); + len += sizeof(struct amsdu_subframe_hdr); + + skb_pull(skb, sizeof(struct ethhdr)); + memcpy(skb_push(skb, len), decap_hdr, len); + memcpy(skb_push(skb, hdr_len), hdr, hdr_len); + break; + case RX_MSDU_DECAP_8023_SNAP_LLC: + memcpy(skb_push(skb, hdr_len), hdr, hdr_len); + break; } + info->skb = skb; + info->encrypt_type = enctype; skb = skb->next; - } - - info->skb = amsdu; - info->encrypt_type = enctype; + info->skb->next = NULL; - ath10k_htt_rx_free_msdu_chain(first); + ath10k_process_rx(htt->ar, info); + } - return 0; + /* FIXME: It might be nice to re-assemble the A-MSDU when there's a + * monitor interface active for sniffing purposes. */ } -static int ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info) +static void ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info) { struct sk_buff *skb = info->skb; struct htt_rx_desc *rxd; @@ -742,6 +721,8 @@ static int ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info) RX_MPDU_START_INFO0_ENCRYPT_TYPE); hdr = (void *)skb->data - RX_HTT_HDR_STATUS_LEN; + skb->ip_summed = ath10k_htt_rx_get_csum_state(skb); + switch (fmt) { case RX_MSDU_DECAP_RAW: /* remove trailing FCS */ @@ -782,7 +763,8 @@ static int ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info) info->skb = skb; info->encrypt_type = enctype; - return 0; + + ath10k_process_rx(htt->ar, info); } static bool ath10k_htt_rx_has_decrypt_err(struct sk_buff *skb) @@ -854,8 +836,6 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt, int fw_desc_len; u8 *fw_desc; int i, j; - int ret; - int ip_summed; memset(&info, 0, sizeof(info)); @@ -930,11 +910,6 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt, continue; } - /* The skb is not yet processed and it may be - * reallocated. Since the offload is in the original - * skb extract the checksum now and assign it later */ - ip_summed = ath10k_htt_rx_get_csum_state(msdu_head); - info.skb = msdu_head; info.fcs_err = ath10k_htt_rx_has_fcs_err(msdu_head); info.signal = ATH10K_DEFAULT_NOISE_FLOOR; @@ -947,24 +922,9 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt, hdr = ath10k_htt_rx_skb_get_hdr(msdu_head); if (ath10k_htt_rx_hdr_is_amsdu(hdr)) - ret = ath10k_htt_rx_amsdu(htt, &info); + ath10k_htt_rx_amsdu(htt, &info); else - ret = ath10k_htt_rx_msdu(htt, &info); - - if (ret && !info.fcs_err) { - ath10k_warn("error processing msdus %d\n", ret); - dev_kfree_skb_any(info.skb); - continue; - } - - if (ath10k_htt_rx_hdr_is_amsdu((void *)info.skb->data)) - ath10k_dbg(ATH10K_DBG_HTT, "htt mpdu is amsdu\n"); - - info.skb->ip_summed = ip_summed; - - ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "htt mpdu: ", - info.skb->data, info.skb->len); - ath10k_process_rx(htt->ar, &info); + ath10k_htt_rx_msdu(htt, &info); } } diff --git a/drivers/net/wireless/ath/ath10k/txrx.c b/drivers/net/wireless/ath/ath10k/txrx.c index 57931d0..5ae373a 100644 --- a/drivers/net/wireless/ath/ath10k/txrx.c +++ b/drivers/net/wireless/ath/ath10k/txrx.c @@ -268,6 +268,8 @@ void ath10k_process_rx(struct ath10k *ar, struct htt_rx_info *info) status->vht_nss, status->freq, status->band); + ath10k_dbg_dump(ATH10K_DBG_HTT_DUMP, NULL, "rx skb: ", + info->skb->data, info->skb->len); ieee80211_rx(ar->hw, info->skb); } -- cgit v0.10.2 From 26d1e9c2610c36689d48f7167ddc007e970d5489 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Thu, 26 Sep 2013 10:12:23 +0300 Subject: ath10k: document decap modes Clarify how each decap mode works in one place. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/rx_desc.h b/drivers/net/wireless/ath/ath10k/rx_desc.h index bfec6c8..1c584c4 100644 --- a/drivers/net/wireless/ath/ath10k/rx_desc.h +++ b/drivers/net/wireless/ath/ath10k/rx_desc.h @@ -422,10 +422,30 @@ struct rx_mpdu_end { #define RX_MSDU_START_INFO1_IP_FRAG (1 << 14) #define RX_MSDU_START_INFO1_TCP_ONLY_ACK (1 << 15) +/* The decapped header (rx_hdr_status) contains the following: + * a) 802.11 header + * [padding to 4 bytes] + * b) HW crypto parameter + * - 0 bytes for no security + * - 4 bytes for WEP + * - 8 bytes for TKIP, AES + * [padding to 4 bytes] + * c) A-MSDU subframe header (14 bytes) if appliable + * d) LLC/SNAP (RFC1042, 8 bytes) + * + * In case of A-MSDU only first frame in sequence contains (a) and (b). */ enum rx_msdu_decap_format { - RX_MSDU_DECAP_RAW = 0, - RX_MSDU_DECAP_NATIVE_WIFI = 1, + RX_MSDU_DECAP_RAW = 0, + + /* Note: QoS frames are reported as non-QoS. The rx_hdr_status in + * htt_rx_desc contains the original decapped 802.11 header. */ + RX_MSDU_DECAP_NATIVE_WIFI = 1, + + /* Payload contains an ethernet header (struct ethhdr). */ RX_MSDU_DECAP_ETHERNET2_DIX = 2, + + /* Payload contains two 48-bit addresses and 2-byte length (14 bytes + * total), followed by an RFC1042 header (8 bytes). */ RX_MSDU_DECAP_8023_SNAP_LLC = 3 }; -- cgit v0.10.2 From e3fbf8d22a7ba109d1542c50c063acc23ef818ff Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Thu, 26 Sep 2013 10:12:23 +0300 Subject: ath10k: cleanup RX decap handling Simplify decapping code and make it easier to understand. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index 617df96..cdb4e6d 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -669,11 +669,16 @@ static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt, switch (fmt) { case RX_MSDU_DECAP_RAW: + /* remove trailing FCS */ skb_trim(skb, skb->len - FCS_LEN); break; case RX_MSDU_DECAP_NATIVE_WIFI: + /* nothing to do */ break; case RX_MSDU_DECAP_ETHERNET2_DIX: + /* strip ethernet header and insert decapped 802.11 + * header, amsdu subframe header and rfc1042 header */ + len = 0; len += sizeof(struct rfc1042_hdr); len += sizeof(struct amsdu_subframe_hdr); @@ -683,6 +688,8 @@ static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt, memcpy(skb_push(skb, hdr_len), hdr, hdr_len); break; case RX_MSDU_DECAP_8023_SNAP_LLC: + /* insert decapped 802.11 header making a singly + * A-MSDU */ memcpy(skb_push(skb, hdr_len), hdr, hdr_len); break; } @@ -706,6 +713,8 @@ static void ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info) struct ieee80211_hdr *hdr; enum rx_msdu_decap_format fmt; enum htt_rx_mpdu_encrypt_type enctype; + int hdr_len; + void *rfc1042; /* This shouldn't happen. If it does than it may be a FW bug. */ if (skb->next) { @@ -719,46 +728,39 @@ static void ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info) RX_MSDU_START_INFO1_DECAP_FORMAT); enctype = MS(__le32_to_cpu(rxd->mpdu_start.info0), RX_MPDU_START_INFO0_ENCRYPT_TYPE); - hdr = (void *)skb->data - RX_HTT_HDR_STATUS_LEN; + hdr = (struct ieee80211_hdr *)rxd->rx_hdr_status; + hdr_len = ieee80211_hdrlen(hdr->frame_control); skb->ip_summed = ath10k_htt_rx_get_csum_state(skb); switch (fmt) { case RX_MSDU_DECAP_RAW: /* remove trailing FCS */ - skb_trim(skb, skb->len - 4); + skb_trim(skb, skb->len - FCS_LEN); break; case RX_MSDU_DECAP_NATIVE_WIFI: /* nothing to do here */ break; case RX_MSDU_DECAP_ETHERNET2_DIX: - /* macaddr[6] + macaddr[6] + ethertype[2] */ - skb_pull(skb, 6 + 6 + 2); - break; - case RX_MSDU_DECAP_8023_SNAP_LLC: - /* macaddr[6] + macaddr[6] + len[2] */ - /* we don't need this for non-A-MSDU */ - skb_pull(skb, 6 + 6 + 2); - break; - } - - if (fmt == RX_MSDU_DECAP_ETHERNET2_DIX) { - void *llc; - int llclen; + /* strip ethernet header and insert decapped 802.11 header and + * rfc1042 header */ - llclen = 8; - llc = hdr; - llc += roundup(ieee80211_hdrlen(hdr->frame_control), 4); - llc += roundup(ath10k_htt_rx_crypto_param_len(enctype), 4); + rfc1042 = hdr; + rfc1042 += roundup(hdr_len, 4); + rfc1042 += roundup(ath10k_htt_rx_crypto_param_len(enctype), 4); - skb_push(skb, llclen); - memcpy(skb->data, llc, llclen); - } + skb_pull(skb, sizeof(struct ethhdr)); + memcpy(skb_push(skb, sizeof(struct rfc1042_hdr)), + rfc1042, sizeof(struct rfc1042_hdr)); + memcpy(skb_push(skb, hdr_len), hdr, hdr_len); + break; + case RX_MSDU_DECAP_8023_SNAP_LLC: + /* remove A-MSDU subframe header and insert + * decapped 802.11 header. rfc1042 header is already there */ - if (fmt >= RX_MSDU_DECAP_ETHERNET2_DIX) { - int len = ieee80211_hdrlen(hdr->frame_control); - skb_push(skb, len); - memcpy(skb->data, hdr, len); + skb_pull(skb, sizeof(struct amsdu_subframe_hdr)); + memcpy(skb_push(skb, hdr_len), hdr, hdr_len); + break; } info->skb = skb; -- cgit v0.10.2 From 784f69d31bd57973ef1dab9f5110018e38d92cf3 Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Thu, 26 Sep 2013 10:12:23 +0300 Subject: ath10k: fix Native Wifi decap mode RX NWifi decap mode always reports 802.11 Data Frames, even when QoS Data Frames are actually received. This made mac80211 not report frame priority properly (since there was no QoS Control field). Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index cdb4e6d..c4637f1 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -618,7 +618,7 @@ static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt, enum rx_msdu_decap_format fmt; enum htt_rx_mpdu_encrypt_type enctype; struct ieee80211_hdr *hdr; - u8 hdr_buf[64]; + u8 hdr_buf[64], addr[ETH_ALEN], *qos; unsigned int hdr_len; rxd = (void *)skb->data - sizeof(*rxd); @@ -673,7 +673,25 @@ static void ath10k_htt_rx_amsdu(struct ath10k_htt *htt, skb_trim(skb, skb->len - FCS_LEN); break; case RX_MSDU_DECAP_NATIVE_WIFI: - /* nothing to do */ + /* pull decapped header and copy DA */ + hdr = (struct ieee80211_hdr *)skb->data; + hdr_len = ieee80211_hdrlen(hdr->frame_control); + memcpy(addr, ieee80211_get_DA(hdr), ETH_ALEN); + skb_pull(skb, hdr_len); + + /* push original 802.11 header */ + hdr = (struct ieee80211_hdr *)hdr_buf; + hdr_len = ieee80211_hdrlen(hdr->frame_control); + memcpy(skb_push(skb, hdr_len), hdr, hdr_len); + + /* original A-MSDU header has the bit set but we're + * not including A-MSDU subframe header */ + hdr = (struct ieee80211_hdr *)skb->data; + qos = ieee80211_get_qos_ctl(hdr); + qos[0] &= ~IEEE80211_QOS_CTL_A_MSDU_PRESENT; + + /* original 802.11 header has a different DA */ + memcpy(ieee80211_get_DA(hdr), addr, ETH_ALEN); break; case RX_MSDU_DECAP_ETHERNET2_DIX: /* strip ethernet header and insert decapped 802.11 @@ -739,7 +757,15 @@ static void ath10k_htt_rx_msdu(struct ath10k_htt *htt, struct htt_rx_info *info) skb_trim(skb, skb->len - FCS_LEN); break; case RX_MSDU_DECAP_NATIVE_WIFI: - /* nothing to do here */ + /* Pull decapped header */ + hdr = (struct ieee80211_hdr *)skb->data; + hdr_len = ieee80211_hdrlen(hdr->frame_control); + skb_pull(skb, hdr_len); + + /* Push original header */ + hdr = (struct ieee80211_hdr *)rxd->rx_hdr_status; + hdr_len = ieee80211_hdrlen(hdr->frame_control); + memcpy(skb_push(skb, hdr_len), hdr, hdr_len); break; case RX_MSDU_DECAP_ETHERNET2_DIX: /* strip ethernet header and insert decapped 802.11 header and -- cgit v0.10.2 From 4d316c79a5dcc13dea8110f0fcf295a17b4b625b Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Thu, 26 Sep 2013 10:12:24 +0300 Subject: ath10k: align RX frames properly Ethernet-like decapping mode leaves IP protocol frame not aligned to 4-byte boundaries. This leads to re-aligning in mac80211 which in turn leads to poor CPU cache behaviour on some machines. Since HW doesn't allow to change payload offset properly the solution is to force HW to decap in Native Wifi mode which always has 24-bytes long 802.11 header (even for QoS frames). This means IP frame is properly aligned in this decap mode. Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h index 643f0c9..8c1be768 100644 --- a/drivers/net/wireless/ath/ath10k/hw.h +++ b/drivers/net/wireless/ath/ath10k/hw.h @@ -74,7 +74,11 @@ enum ath10k_mcast2ucast_mode { #define TARGET_RX_CHAIN_MASK (BIT(0) | BIT(1) | BIT(2)) #define TARGET_RX_TIMEOUT_LO_PRI 100 #define TARGET_RX_TIMEOUT_HI_PRI 40 -#define TARGET_RX_DECAP_MODE ATH10K_HW_TXRX_ETHERNET + +/* Native Wifi decap mode is used to align IP frames to 4-byte boundaries and + * avoid a very expensive re-alignment in mac80211. */ +#define TARGET_RX_DECAP_MODE ATH10K_HW_TXRX_NATIVE_WIFI + #define TARGET_SCAN_MAX_PENDING_REQS 4 #define TARGET_BMISS_OFFLOAD_MAX_VDEV 3 #define TARGET_ROAM_OFFLOAD_MAX_VDEV 3 -- cgit v0.10.2 From 6e712d427cb0542afdd5220edb6e4f4f8a5b952d Mon Sep 17 00:00:00 2001 From: Michal Kazior Date: Tue, 24 Sep 2013 10:18:36 +0200 Subject: ath10k: replenish HTT RX buffers in a tasklet This starves FW RX ring buffer in case of excessive RX. This prevents from CPU being overwhelmed by RX indications/completions by naturally forbiddin FW to submit more RX. This fixes RX starvation on slow machines when under heavy RX traffic. kvalo: remove extra newline Signed-off-by: Michal Kazior Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath10k/htt.h b/drivers/net/wireless/ath/ath10k/htt.h index e090902..1a337e9 100644 --- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h @@ -19,6 +19,7 @@ #define _HTT_H_ #include +#include #include "htc.h" #include "rx_desc.h" @@ -1268,6 +1269,7 @@ struct ath10k_htt { /* set if host-fw communication goes haywire * used to avoid further failures */ bool rx_confused; + struct tasklet_struct rx_replenish_task; }; #define RX_HTT_HDR_STATUS_LEN 64 @@ -1308,6 +1310,10 @@ struct htt_rx_desc { #define HTT_RX_BUF_SIZE 1920 #define HTT_RX_MSDU_SIZE (HTT_RX_BUF_SIZE - (int)sizeof(struct htt_rx_desc)) +/* Refill a bunch of RX buffers for each refill round so that FW/HW can handle + * aggregated traffic more nicely. */ +#define ATH10K_HTT_MAX_NUM_REFILL 16 + /* * DMA_MAP expects the buffer to be an integral number of cache lines. * Rather than checking the actual cache line size, this code makes a diff --git a/drivers/net/wireless/ath/ath10k/htt_rx.c b/drivers/net/wireless/ath/ath10k/htt_rx.c index c4637f1..90d4f74 100644 --- a/drivers/net/wireless/ath/ath10k/htt_rx.c +++ b/drivers/net/wireless/ath/ath10k/htt_rx.c @@ -182,10 +182,27 @@ static int ath10k_htt_rx_ring_fill_n(struct ath10k_htt *htt, int num) static void ath10k_htt_rx_msdu_buff_replenish(struct ath10k_htt *htt) { - int ret, num_to_fill; + int ret, num_deficit, num_to_fill; + /* Refilling the whole RX ring buffer proves to be a bad idea. The + * reason is RX may take up significant amount of CPU cycles and starve + * other tasks, e.g. TX on an ethernet device while acting as a bridge + * with ath10k wlan interface. This ended up with very poor performance + * once CPU the host system was overwhelmed with RX on ath10k. + * + * By limiting the number of refills the replenishing occurs + * progressively. This in turns makes use of the fact tasklets are + * processed in FIFO order. This means actual RX processing can starve + * out refilling. If there's not enough buffers on RX ring FW will not + * report RX until it is refilled with enough buffers. This + * automatically balances load wrt to CPU power. + * + * This probably comes at a cost of lower maximum throughput but + * improves the avarage and stability. */ spin_lock_bh(&htt->rx_ring.lock); - num_to_fill = htt->rx_ring.fill_level - htt->rx_ring.fill_cnt; + num_deficit = htt->rx_ring.fill_level - htt->rx_ring.fill_cnt; + num_to_fill = min(ATH10K_HTT_MAX_NUM_REFILL, num_deficit); + num_deficit -= num_to_fill; ret = ath10k_htt_rx_ring_fill_n(htt, num_to_fill); if (ret == -ENOMEM) { /* @@ -196,6 +213,8 @@ static void ath10k_htt_rx_msdu_buff_replenish(struct ath10k_htt *htt) */ mod_timer(&htt->rx_ring.refill_retry_timer, jiffies + msecs_to_jiffies(HTT_RX_RING_REFILL_RETRY_MS)); + } else if (num_deficit > 0) { + tasklet_schedule(&htt->rx_replenish_task); } spin_unlock_bh(&htt->rx_ring.lock); } @@ -217,6 +236,7 @@ void ath10k_htt_rx_detach(struct ath10k_htt *htt) int sw_rd_idx = htt->rx_ring.sw_rd_idx.msdu_payld; del_timer_sync(&htt->rx_ring.refill_retry_timer); + tasklet_kill(&htt->rx_replenish_task); while (sw_rd_idx != __le32_to_cpu(*(htt->rx_ring.alloc_idx.vaddr))) { struct sk_buff *skb = @@ -446,6 +466,12 @@ static int ath10k_htt_rx_amsdu_pop(struct ath10k_htt *htt, return msdu_chaining; } +static void ath10k_htt_rx_replenish_task(unsigned long ptr) +{ + struct ath10k_htt *htt = (struct ath10k_htt *)ptr; + ath10k_htt_rx_msdu_buff_replenish(htt); +} + int ath10k_htt_rx_attach(struct ath10k_htt *htt) { dma_addr_t paddr; @@ -506,6 +532,9 @@ int ath10k_htt_rx_attach(struct ath10k_htt *htt) if (__ath10k_htt_rx_ring_fill_n(htt, htt->rx_ring.fill_level)) goto err_fill_ring; + tasklet_init(&htt->rx_replenish_task, ath10k_htt_rx_replenish_task, + (unsigned long)htt); + ath10k_dbg(ATH10K_DBG_BOOT, "htt rx ring size %d fill_level %d\n", htt->rx_ring.size, htt->rx_ring.fill_level); return 0; @@ -956,7 +985,7 @@ static void ath10k_htt_rx_handler(struct ath10k_htt *htt, } } - ath10k_htt_rx_msdu_buff_replenish(htt); + tasklet_schedule(&htt->rx_replenish_task); } static void ath10k_htt_rx_frag_handler(struct ath10k_htt *htt, -- cgit v0.10.2 From 1c6bbe47396bb1b6ddb4967e262371e3857de2e7 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:58:59 +0530 Subject: ath9k: Update initvals for AR9565 1.0 Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h index e85a8b0..03ecc07 100644 --- a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h @@ -272,9 +272,9 @@ static const u32 ar9565_1p0_baseband_core[][2] = { {0x0000a398, 0x001f0e0f}, {0x0000a39c, 0x0075393f}, {0x0000a3a0, 0xb79f6427}, - {0x0000a3a4, 0x00000000}, - {0x0000a3a8, 0xaaaaaaaa}, - {0x0000a3ac, 0x3c466478}, + {0x0000a3a4, 0x00000011}, + {0x0000a3a8, 0xaaaaaa6e}, + {0x0000a3ac, 0x3c466455}, {0x0000a3c0, 0x20202020}, {0x0000a3c4, 0x22222220}, {0x0000a3c8, 0x20200020}, @@ -295,11 +295,11 @@ static const u32 ar9565_1p0_baseband_core[][2] = { {0x0000a404, 0x00000000}, {0x0000a408, 0x0e79e5c6}, {0x0000a40c, 0x00820820}, - {0x0000a414, 0x1ce739ce}, + {0x0000a414, 0x1ce739c5}, {0x0000a418, 0x2d001dce}, - {0x0000a41c, 0x1ce739ce}, + {0x0000a41c, 0x1ce739c5}, {0x0000a420, 0x000001ce}, - {0x0000a424, 0x1ce739ce}, + {0x0000a424, 0x1ce739c5}, {0x0000a428, 0x000001ce}, {0x0000a42c, 0x1ce739ce}, {0x0000a430, 0x1ce739ce}, @@ -351,9 +351,9 @@ static const u32 ar9565_1p0_baseband_postamble[][5] = { {0x00009e14, 0x37b95d5e, 0x37b9605e, 0x3379605e, 0x33795d5e}, {0x00009e18, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c}, - {0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce}, + {0x00009e20, 0x000003b5, 0x000003b5, 0x000003a4, 0x000003a4}, {0x00009e2c, 0x0000001c, 0x0000001c, 0x00000021, 0x00000021}, - {0x00009e3c, 0xcf946222, 0xcf946222, 0xcf946222, 0xcf946222}, + {0x00009e3c, 0xcf946222, 0xcf946222, 0xcf946220, 0xcf946220}, {0x00009e44, 0xfe321e27, 0xfe321e27, 0xfe291e27, 0xfe291e27}, {0x00009e48, 0x5030201a, 0x5030201a, 0x50302012, 0x50302012}, {0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000}, @@ -452,6 +452,7 @@ static const u32 ar9565_1p0_Common_rx_gain_table[][2] = { /* Addr allmodes */ {0x00004050, 0x00300300}, {0x0000406c, 0x00100000}, + {0x00009e20, 0x000003b6}, {0x0000a000, 0x00010000}, {0x0000a004, 0x00030002}, {0x0000a008, 0x00050004}, -- cgit v0.10.2 From 7e12d6a496fefb202ea2bfbbcab7426b9bd77d5b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:59:00 +0530 Subject: ath9k: Bypass EEPROM for diversity cap for AR9565 Use a default antenna diversity value for AR9565 instead of relying on the EEPROM/OTP programmed value. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index f486480..6af2d73 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -2991,7 +2991,10 @@ static u32 ath9k_hw_ar9300_get_eeprom(struct ath_hw *ah, case EEP_CHAIN_MASK_REDUCE: return (pBase->miscConfiguration >> 0x3) & 0x1; case EEP_ANT_DIV_CTL1: - return eep->base_ext1.ant_div_control; + if (AR_SREV_9565(ah)) + return AR9300_EEP_ANTDIV_CONTROL_DEFAULT_VALUE; + else + return eep->base_ext1.ant_div_control; case EEP_ANTENNA_GAIN_5G: return eep->modalHeader5G.antennaGain; case EEP_ANTENNA_GAIN_2G: diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 75d4fb4..0e5daa5 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -52,6 +52,8 @@ #define AR9300_PAPRD_SCALE_2 0x70000000 #define AR9300_PAPRD_SCALE_2_S 28 +#define AR9300_EEP_ANTDIV_CONTROL_DEFAULT_VALUE 0xc9 + /* Delta from which to start power to pdadc table */ /* This offset is used in both open loop and closed loop power control * schemes. In open loop power control, it is not really needed, but for -- cgit v0.10.2 From c946868228685b66ed41a8526ba0b6c9875622c8 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:59:01 +0530 Subject: ath9k: Fix antenna diversity init for AR9565 Program the HW registers (AR_PHY_CCK_DETECT, AR_PHY_MC_GAIN_CTRL) with the correct values for AR9565 to allow LNA combining. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 6af2d73..5982256 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3659,9 +3659,23 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) if (AR_SREV_9565(ah)) { if (common->bt_ant_diversity) { regval |= (1 << AR_PHY_ANT_SW_RX_PROT_S); + + REG_SET_BIT(ah, AR_PHY_RESTART, + AR_PHY_RESTART_ENABLE_DIV_M2FLAG); + + /* Force WLAN LNA diversity ON */ + REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, + AR_BTCOEX_WL_LNADIV_FORCE_ON); } else { regval &= ~(1 << AR_PHY_ANT_DIV_LNADIV_S); regval &= ~(1 << AR_PHY_ANT_SW_RX_PROT_S); + + REG_CLR_BIT(ah, AR_PHY_MC_GAIN_CTRL, + (1 << AR_PHY_ANT_SW_RX_PROT_S)); + + /* Force WLAN LNA diversity OFF */ + REG_CLR_BIT(ah, AR_BTCOEX_WL_LNADIV, + AR_BTCOEX_WL_LNADIV_FORCE_ON); } } @@ -3672,7 +3686,8 @@ static void ar9003_hw_ant_ctrl_apply(struct ath_hw *ah, bool is2ghz) regval &= (~AR_FAST_DIV_ENABLE); regval |= ((value >> 7) & 0x1) << AR_FAST_DIV_ENABLE_S; - if (AR_SREV_9485(ah) && common->bt_ant_diversity) + if ((AR_SREV_9485(ah) || AR_SREV_9565(ah)) + && common->bt_ant_diversity) regval |= AR_FAST_DIV_ENABLE; REG_WRITE(ah, AR_PHY_CCK_DETECT, regval); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index e897648..9ca9b2c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1489,17 +1489,24 @@ static void ar9003_hw_set_bt_ant_diversity(struct ath_hw *ah, bool enable) } else if (AR_SREV_9565(ah)) { if (enable) { REG_SET_BIT(ah, AR_PHY_MC_GAIN_CTRL, + AR_ANT_DIV_ENABLE); + REG_SET_BIT(ah, AR_PHY_MC_GAIN_CTRL, (1 << AR_PHY_ANT_SW_RX_PROT_S)); - if (ah->curchan && IS_CHAN_2GHZ(ah->curchan)) - REG_SET_BIT(ah, AR_PHY_RESTART, - AR_PHY_RESTART_ENABLE_DIV_M2FLAG); + REG_SET_BIT(ah, AR_PHY_CCK_DETECT, + AR_FAST_DIV_ENABLE); + REG_SET_BIT(ah, AR_PHY_RESTART, + AR_PHY_RESTART_ENABLE_DIV_M2FLAG); REG_SET_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON); } else { - REG_CLR_BIT(ah, AR_PHY_MC_GAIN_CTRL, AR_ANT_DIV_ENABLE); + REG_CLR_BIT(ah, AR_PHY_MC_GAIN_CTRL, + AR_ANT_DIV_ENABLE); REG_CLR_BIT(ah, AR_PHY_MC_GAIN_CTRL, (1 << AR_PHY_ANT_SW_RX_PROT_S)); - REG_CLR_BIT(ah, AR_PHY_CCK_DETECT, AR_FAST_DIV_ENABLE); + REG_CLR_BIT(ah, AR_PHY_CCK_DETECT, + AR_FAST_DIV_ENABLE); + REG_CLR_BIT(ah, AR_PHY_RESTART, + AR_PHY_RESTART_ENABLE_DIV_M2FLAG); REG_CLR_BIT(ah, AR_BTCOEX_WL_LNADIV, AR_BTCOEX_WL_LNADIV_FORCE_ON); -- cgit v0.10.2 From 6ac2150927399ae0f6d34430145bddc761cbb1a0 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:59:02 +0530 Subject: ath9k: Use correct RX gain table for AR9565 Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index 608bb48..d40bdd2 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -628,6 +628,9 @@ static void ar9003_rx_gain_table_mode0(struct ath_hw *ah) else if (AR_SREV_9462_20(ah)) INIT_INI_ARRAY(&ah->iniModesRxGain, ar9462_common_rx_gain_table_2p0); + else if (AR_SREV_9565(ah)) + INIT_INI_ARRAY(&ah->iniModesRxGain, + ar9565_1p0_Common_rx_gain_table); else INIT_INI_ARRAY(&ah->iniModesRxGain, ar9300Common_rx_gain_table_2p2); -- cgit v0.10.2 From f96bd2ad2259dc5d94fddffe37c668017209712b Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:59:03 +0530 Subject: ath9k: Add support for AR9565 v1.0.1 LNA diversity Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/antenna.c b/drivers/net/wireless/ath/ath9k/antenna.c index dd1cc73..bd048cc 100644 --- a/drivers/net/wireless/ath/ath9k/antenna.c +++ b/drivers/net/wireless/ath/ath9k/antenna.c @@ -332,7 +332,7 @@ static void ath_select_ant_div_from_quick_scan(struct ath_ant_comb *antcomb, } if (antcomb->rssi_lna2 > antcomb->rssi_lna1 + - ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA) + div_ant_conf->lna1_lna2_switch_delta) div_ant_conf->main_lna_conf = ATH_ANT_DIV_COMB_LNA2; else div_ant_conf->main_lna_conf = ATH_ANT_DIV_COMB_LNA1; @@ -554,42 +554,22 @@ static void ath_ant_div_conf_fast_divbias(struct ath_hw_antcomb_conf *ant_conf, ant_conf->fast_div_bias = 0x1; break; case 0x10: /* LNA2 A-B */ - if ((antcomb->scan == 0) && - (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) { - ant_conf->fast_div_bias = 0x3f; - } else { - ant_conf->fast_div_bias = 0x1; - } + ant_conf->fast_div_bias = 0x2; break; case 0x12: /* LNA2 LNA1 */ - ant_conf->fast_div_bias = 0x39; + ant_conf->fast_div_bias = 0x3f; break; case 0x13: /* LNA2 A+B */ - if ((antcomb->scan == 0) && - (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) { - ant_conf->fast_div_bias = 0x3f; - } else { - ant_conf->fast_div_bias = 0x1; - } + ant_conf->fast_div_bias = 0x2; break; case 0x20: /* LNA1 A-B */ - if ((antcomb->scan == 0) && - (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) { - ant_conf->fast_div_bias = 0x3f; - } else { - ant_conf->fast_div_bias = 0x4; - } + ant_conf->fast_div_bias = 0x3; break; case 0x21: /* LNA1 LNA2 */ - ant_conf->fast_div_bias = 0x6; + ant_conf->fast_div_bias = 0x3; break; case 0x23: /* LNA1 A+B */ - if ((antcomb->scan == 0) && - (alt_ratio > ATH_ANT_DIV_COMB_ALT_ANT_RATIO)) { - ant_conf->fast_div_bias = 0x3f; - } else { - ant_conf->fast_div_bias = 0x6; - } + ant_conf->fast_div_bias = 0x3; break; case 0x30: /* A+B A-B */ ant_conf->fast_div_bias = 0x1; @@ -638,7 +618,7 @@ static void ath_ant_try_scan(struct ath_ant_comb *antcomb, antcomb->rssi_sub = alt_rssi_avg; antcomb->scan = false; if (antcomb->rssi_lna2 > - (antcomb->rssi_lna1 + ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA)) { + (antcomb->rssi_lna1 + conf->lna1_lna2_switch_delta)) { /* use LNA2 as main LNA */ if ((antcomb->rssi_add > antcomb->rssi_lna1) && (antcomb->rssi_add > antcomb->rssi_sub)) { diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 1fc1fa9..7a5569b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -532,6 +532,7 @@ static void ar9002_hw_antdiv_comb_conf_get(struct ath_hw *ah, AR_PHY_9285_ANT_DIV_ALT_LNACONF_S; antconf->fast_div_bias = (regval & AR_PHY_9285_FAST_DIV_BIAS) >> AR_PHY_9285_FAST_DIV_BIAS_S; + antconf->lna1_lna2_switch_delta = -1; antconf->lna1_lna2_delta = -3; antconf->div_group = 0; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 9ca9b2c..b8a279e 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -1375,15 +1375,19 @@ static void ar9003_hw_antdiv_comb_conf_get(struct ath_hw *ah, AR_PHY_ANT_FAST_DIV_BIAS_S; if (AR_SREV_9330_11(ah)) { + antconf->lna1_lna2_switch_delta = -1; antconf->lna1_lna2_delta = -9; antconf->div_group = 1; } else if (AR_SREV_9485(ah)) { + antconf->lna1_lna2_switch_delta = -1; antconf->lna1_lna2_delta = -9; antconf->div_group = 2; } else if (AR_SREV_9565(ah)) { - antconf->lna1_lna2_delta = -3; + antconf->lna1_lna2_switch_delta = 3; + antconf->lna1_lna2_delta = -9; antconf->div_group = 3; } else { + antconf->lna1_lna2_switch_delta = -1; antconf->lna1_lna2_delta = -3; antconf->div_group = 0; } diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 2ee35f6..74a8770 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -581,7 +581,6 @@ static inline void ath_fill_led_pin(struct ath_softc *sc) #define ATH_ANT_DIV_COMB_ALT_ANT_RATIO_LOW_RSSI 50 #define ATH_ANT_DIV_COMB_ALT_ANT_RATIO2_LOW_RSSI 50 -#define ATH_ANT_DIV_COMB_LNA1_LNA2_SWITCH_DELTA -1 #define ATH_ANT_DIV_COMB_LNA1_DELTA_HI -4 #define ATH_ANT_DIV_COMB_LNA1_DELTA_MID -2 #define ATH_ANT_DIV_COMB_LNA1_DELTA_LOW 2 diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 69a907b..88f67c3 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -558,6 +558,7 @@ struct ath_hw_antcomb_conf { u8 main_gaintb; u8 alt_gaintb; int lna1_lna2_delta; + int lna1_lna2_switch_delta; u8 div_group; }; -- cgit v0.10.2 From 1823a4212b04dd210f45eb0392af80d8a30fd593 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:59:04 +0530 Subject: ath9k: Enable antenna diversity for WB335 Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index d089a7c..b43a2ec 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -269,7 +269,11 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { { PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E AR9462 */ { PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E AR1111/AR9485 */ - { PCI_VDEVICE(ATHEROS, 0x0036) }, /* PCI-E AR9565 */ + + /* PCI-E AR9565 (WB335) */ + { PCI_VDEVICE(ATHEROS, 0x0036), + .driver_data = ATH9K_PCI_BT_ANT_DIV }, + { 0 } }; -- cgit v0.10.2 From 10631336eb11646680394868338120d5fae98a78 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:59:05 +0530 Subject: ath9k: Identify CUS252 cards These cards are based on WB335/AR9565. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 74a8770..585c310 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -628,9 +628,10 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs); #define ATH9K_PCI_CUS198 0x0001 #define ATH9K_PCI_CUS230 0x0002 #define ATH9K_PCI_CUS217 0x0004 -#define ATH9K_PCI_WOW 0x0008 -#define ATH9K_PCI_BT_ANT_DIV 0x0010 -#define ATH9K_PCI_D3_L1_WAR 0x0020 +#define ATH9K_PCI_CUS252 0x0008 +#define ATH9K_PCI_WOW 0x0010 +#define ATH9K_PCI_BT_ANT_DIV 0x0020 +#define ATH9K_PCI_D3_L1_WAR 0x0040 /* * Default cache line size, in bytes. diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 9a1f349..4fe0535 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -547,6 +547,9 @@ static void ath9k_init_platform(struct ath_softc *sc) if (sc->driver_data & ATH9K_PCI_CUS217) ath_info(common, "CUS217 card detected\n"); + if (sc->driver_data & ATH9K_PCI_CUS252) + ath_info(common, "CUS252 card detected\n"); + if (sc->driver_data & ATH9K_PCI_BT_ANT_DIV) { pCap->hw_caps |= ATH9K_HW_CAP_BT_ANT_DIV; ath_info(common, "Set BT/WLAN RX diversity capability\n"); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index b43a2ec..465574b 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -270,6 +270,18 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { { PCI_VDEVICE(ATHEROS, 0x0034) }, /* PCI-E AR9462 */ { PCI_VDEVICE(ATHEROS, 0x0037) }, /* PCI-E AR1111/AR9485 */ + /* CUS252 */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_ATHEROS, + 0x3028), + .driver_data = ATH9K_PCI_CUS252 | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_AZWAVE, + 0x2176), + .driver_data = ATH9K_PCI_CUS252 | ATH9K_PCI_BT_ANT_DIV }, + /* PCI-E AR9565 (WB335) */ { PCI_VDEVICE(ATHEROS, 0x0036), .driver_data = ATH9K_PCI_BT_ANT_DIV }, -- cgit v0.10.2 From 3fcdd0a12ee0adb139d64b58658366191cb168a7 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 2 Sep 2013 13:59:06 +0530 Subject: ath9k: Identify WB335 Antenna configuration There are 2 types of WB335 cards, 1-antenna and 2-antenna. Identify them based on PCI subsystem IDs, this will be used for MCI/BTCOEX tweaks. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 585c310..5fd4294 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -625,13 +625,15 @@ void ath_ant_comb_scan(struct ath_softc *sc, struct ath_rx_status *rs); /* Main driver core */ /********************/ -#define ATH9K_PCI_CUS198 0x0001 -#define ATH9K_PCI_CUS230 0x0002 -#define ATH9K_PCI_CUS217 0x0004 -#define ATH9K_PCI_CUS252 0x0008 -#define ATH9K_PCI_WOW 0x0010 -#define ATH9K_PCI_BT_ANT_DIV 0x0020 -#define ATH9K_PCI_D3_L1_WAR 0x0040 +#define ATH9K_PCI_CUS198 0x0001 +#define ATH9K_PCI_CUS230 0x0002 +#define ATH9K_PCI_CUS217 0x0004 +#define ATH9K_PCI_CUS252 0x0008 +#define ATH9K_PCI_WOW 0x0010 +#define ATH9K_PCI_BT_ANT_DIV 0x0020 +#define ATH9K_PCI_D3_L1_WAR 0x0040 +#define ATH9K_PCI_AR9565_1ANT 0x0080 +#define ATH9K_PCI_AR9565_2ANT 0x0100 /* * Default cache line size, in bytes. diff --git a/drivers/net/wireless/ath/ath9k/init.c b/drivers/net/wireless/ath/ath9k/init.c index 4fe0535..e3d11c4 100644 --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c @@ -550,6 +550,23 @@ static void ath9k_init_platform(struct ath_softc *sc) if (sc->driver_data & ATH9K_PCI_CUS252) ath_info(common, "CUS252 card detected\n"); + if (sc->driver_data & ATH9K_PCI_AR9565_1ANT) + ath_info(common, "WB335 1-ANT card detected\n"); + + if (sc->driver_data & ATH9K_PCI_AR9565_2ANT) + ath_info(common, "WB335 2-ANT card detected\n"); + + /* + * Some WB335 cards do not support antenna diversity. Since + * we use a hardcoded value for AR9565 instead of using the + * EEPROM/OTP data, remove the combining feature from + * the HW capabilities bitmap. + */ + if (sc->driver_data & (ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_AR9565_2ANT)) { + if (!(sc->driver_data & ATH9K_PCI_BT_ANT_DIV)) + pCap->hw_caps &= ~ATH9K_HW_CAP_ANT_DIV_COMB; + } + if (sc->driver_data & ATH9K_PCI_BT_ANT_DIV) { pCap->hw_caps |= ATH9K_HW_CAP_BT_ANT_DIV; ath_info(common, "Set BT/WLAN RX diversity capability\n"); diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 465574b..1aa757a 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -275,12 +275,184 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { 0x0036, PCI_VENDOR_ID_ATHEROS, 0x3028), - .driver_data = ATH9K_PCI_CUS252 | ATH9K_PCI_BT_ANT_DIV }, + .driver_data = ATH9K_PCI_CUS252 | + ATH9K_PCI_AR9565_2ANT | + ATH9K_PCI_BT_ANT_DIV }, { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, 0x0036, PCI_VENDOR_ID_AZWAVE, 0x2176), - .driver_data = ATH9K_PCI_CUS252 | ATH9K_PCI_BT_ANT_DIV }, + .driver_data = ATH9K_PCI_CUS252 | + ATH9K_PCI_AR9565_2ANT | + ATH9K_PCI_BT_ANT_DIV }, + + /* WB335 1-ANT */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_FOXCONN, + 0xE068), + .driver_data = ATH9K_PCI_AR9565_1ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x185F, /* WNC */ + 0xA119), + .driver_data = ATH9K_PCI_AR9565_1ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x0632), + .driver_data = ATH9K_PCI_AR9565_1ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x6671), + .driver_data = ATH9K_PCI_AR9565_1ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x1B9A, /* XAVI */ + 0x2811), + .driver_data = ATH9K_PCI_AR9565_1ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x1B9A, /* XAVI */ + 0x2812), + .driver_data = ATH9K_PCI_AR9565_1ANT }, + + /* WB335 1-ANT / Antenna Diversity */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_ATHEROS, + 0x3025), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_ATHEROS, + 0x3026), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_ATHEROS, + 0x302B), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_FOXCONN, + 0xE069), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x185F, /* WNC */ + 0x3028), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x0622), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x0672), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x0662), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_AZWAVE, + 0x213A), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_LENOVO, + 0x3026), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_HP, + 0x18E3), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_HP, + 0x217F), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + + /* WB335 2-ANT */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_SAMSUNG, + 0x411A), + .driver_data = ATH9K_PCI_AR9565_2ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_SAMSUNG, + 0x411B), + .driver_data = ATH9K_PCI_AR9565_2ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_SAMSUNG, + 0x411C), + .driver_data = ATH9K_PCI_AR9565_2ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_SAMSUNG, + 0x411D), + .driver_data = ATH9K_PCI_AR9565_2ANT }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_SAMSUNG, + 0x411E), + .driver_data = ATH9K_PCI_AR9565_2ANT }, + + /* WB335 2-ANT / Antenna-Diversity */ + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_ATHEROS, + 0x3027), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_ATHEROS, + 0x302C), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x0642), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x0652), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x11AD, /* LITEON */ + 0x0612), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_AZWAVE, + 0x2130), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x144F, /* ASKEY */ + 0x7202), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x1B9A, /* XAVI */ + 0x2810), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + 0x185F, /* WNC */ + 0x3027), + .driver_data = ATH9K_PCI_AR9565_2ANT | ATH9K_PCI_BT_ANT_DIV }, /* PCI-E AR9565 (WB335) */ { PCI_VDEVICE(ATHEROS, 0x0036), -- cgit v0.10.2 From d3b371cb03330fc2474d418b0a86a5fea7267370 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 3 Sep 2013 10:28:55 +0530 Subject: ath9k: Fix regulatory compliance for AR9462/AR9565 Adjust the CCA values based on the regulatory domain present in the EEPROM. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.h b/drivers/net/wireless/ath/ath9k/ar9003_phy.h index 6fd7523..fca6243 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.h @@ -343,8 +343,12 @@ #define AR_PHY_CCA_NOM_VAL_9462_2GHZ -127 #define AR_PHY_CCA_MIN_GOOD_VAL_9462_2GHZ -127 +#define AR_PHY_CCA_MAX_GOOD_VAL_9462_2GHZ -60 +#define AR_PHY_CCA_MAX_GOOD_VAL_9462_FCC_2GHZ -95 #define AR_PHY_CCA_NOM_VAL_9462_5GHZ -127 #define AR_PHY_CCA_MIN_GOOD_VAL_9462_5GHZ -127 +#define AR_PHY_CCA_MAX_GOOD_VAL_9462_5GHZ -60 +#define AR_PHY_CCA_MAX_GOOD_VAL_9462_FCC_5GHZ -100 #define AR_PHY_CCA_NOM_VAL_9330_2GHZ -118 diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index ecc6ec4..260e0c6 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -549,6 +549,18 @@ static int ath9k_hw_post_init(struct ath_hw *ah) ath9k_hw_ani_init(ah); + /* + * EEPROM needs to be initialized before we do this. + * This is required for regulatory compliance. + */ + if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { + u16 regdmn = ah->eep_ops->get_eeprom(ah, EEP_REG_0); + if ((regdmn & 0xF0) == CTL_FCC) { + ah->nf_2g.max = AR_PHY_CCA_MAX_GOOD_VAL_9462_FCC_2GHZ; + ah->nf_5g.max = AR_PHY_CCA_MAX_GOOD_VAL_9462_FCC_5GHZ; + } + } + return 0; } -- cgit v0.10.2 From 6d5228fe20e42339425bbe8e7600b0c8ca4c943d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 3 Sep 2013 10:28:56 +0530 Subject: ath9k: Add and use initvals for channel 14 This is missing for AR9565. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_hw.c b/drivers/net/wireless/ath/ath9k/ar9003_hw.c index d40bdd2..b07f164 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_hw.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_hw.c @@ -364,6 +364,8 @@ static void ar9003_hw_init_mode_regs(struct ath_hw *ah) INIT_INI_ARRAY(&ah->iniModesFastClock, ar9565_1p0_modes_fast_clock); + INIT_INI_ARRAY(&ah->iniCckfirJapan2484, + ar9565_1p0_baseband_core_txfir_coeff_japan_2484); } else { /* mac */ INIT_INI_ARRAY(&ah->iniMac[ATH_INI_CORE], diff --git a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h index 03ecc07..a8c757b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9565_1p0_initvals.h @@ -1231,4 +1231,11 @@ static const u32 ar9565_1p0_modes_high_power_tx_gain_table[][5] = { {0x00016054, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, }; +static const u32 ar9565_1p0_baseband_core_txfir_coeff_japan_2484[][2] = { + /* Addr allmodes */ + {0x0000a398, 0x00000000}, + {0x0000a39c, 0x6f7f0301}, + {0x0000a3a0, 0xca9228ee}, +}; + #endif /* INITVALS_9565_1P0_H */ -- cgit v0.10.2 From 7c9a72013b652837c4dde9f135f92ab783ee4fbc Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Tue, 3 Sep 2013 10:28:57 +0530 Subject: ath9k: Update AR9485 1.1 initvals * Remove duplicate array mappings. * Fix ETSI CCA compliance. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h index 88ff1d7..6f899c6 100644 --- a/drivers/net/wireless/ath/ath9k/ar9485_initvals.h +++ b/drivers/net/wireless/ath/ath9k/ar9485_initvals.h @@ -20,7 +20,17 @@ /* AR9485 1.1 */ -#define ar9485_1_1_mac_postamble ar9300_2p2_mac_postamble +static const u32 ar9485_1_1_mac_postamble[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x00001030, 0x00000230, 0x00000460, 0x000002c0, 0x00000160}, + {0x00001070, 0x00000168, 0x000002d0, 0x00000318, 0x0000018c}, + {0x000010b0, 0x00000e60, 0x00001cc0, 0x00007c70, 0x00003e38}, + {0x00008014, 0x03e803e8, 0x07d007d0, 0x10801600, 0x08400b00}, + {0x0000801c, 0x128d8027, 0x128d804f, 0x12e00057, 0x12e0002b}, + {0x00008120, 0x08f04800, 0x08f04800, 0x08f04810, 0x08f04810}, + {0x000081d0, 0x00003210, 0x00003210, 0x0000320a, 0x0000320a}, + {0x00008318, 0x00003e80, 0x00007d00, 0x00006880, 0x00003440}, +}; static const u32 ar9485_1_1_pcie_phy_pll_on_clkreq_disable_L1[][2] = { /* Addr allmodes */ @@ -34,6 +44,7 @@ static const u32 ar9485Common_wo_xlna_rx_gain_1_1[][2] = { {0x00009e00, 0x037216a0}, {0x00009e04, 0x00182020}, {0x00009e18, 0x00000000}, + {0x00009e20, 0x000003a8}, {0x00009e2c, 0x00004121}, {0x00009e44, 0x02282324}, {0x0000a000, 0x00060005}, @@ -174,7 +185,7 @@ static const u32 ar9485Modes_high_power_tx_gain_1_1[][5] = { {0x0000a2e0, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, {0x0000a2e4, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, {0x0000a2e8, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050da, 0x000050da}, {0x0000a458, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000}, {0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002}, @@ -200,14 +211,14 @@ static const u32 ar9485Modes_high_power_tx_gain_1_1[][5] = { {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9}, {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb}, {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb}, - {0x0000a560, 0x900fff0b, 0x900fff0b, 0x5e001eeb, 0x5e001eeb}, - {0x0000a564, 0x960fffcb, 0x960fffcb, 0x5e001eeb, 0x5e001eeb}, - {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, - {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, - {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, - {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, - {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, - {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a560, 0x900fff0b, 0x900fff0b, 0x62001eee, 0x62001eee}, + {0x0000a564, 0x960fffcb, 0x960fffcb, 0x66001ff6, 0x66001ff6}, + {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, {0x0000a580, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a584, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a588, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, @@ -263,6 +274,11 @@ static const u32 ar9485Modes_high_power_tx_gain_1_1[][5] = { static const u32 ar9485Modes_green_ob_db_tx_gain_1_1[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x000098bc, 0x00000003, 0x00000003, 0x00000003, 0x00000003}, + {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0x7999a83a, 0x7999a83a}, + {0x0000a2dc, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, + {0x0000a2e0, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, + {0x0000a2e4, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, + {0x0000a2e8, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, {0x0000a458, 0x80000000, 0x80000000, 0x80000000, 0x80000000}, {0x0000a500, 0x00022200, 0x00022200, 0x00000006, 0x00000006}, @@ -297,6 +313,22 @@ static const u32 ar9485Modes_green_ob_db_tx_gain_1_1[][5] = { {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x5e001eeb, 0x5e001eeb}, + {0x0000a580, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a584, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a588, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a58c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a590, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a594, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a598, 0x00000000, 0x00000000, 0x01404501, 0x01404501}, + {0x0000a59c, 0x00000000, 0x00000000, 0x02808a02, 0x02808a02}, + {0x0000a5a0, 0x00000000, 0x00000000, 0x02808a02, 0x02808a02}, + {0x0000a5a4, 0x00000000, 0x00000000, 0x02808803, 0x02808803}, + {0x0000a5a8, 0x00000000, 0x00000000, 0x04c14b04, 0x04c14b04}, + {0x0000a5ac, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5b0, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5b4, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5b8, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5bc, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, {0x0000b500, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, {0x0000b504, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, {0x0000b508, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, @@ -341,6 +373,100 @@ static const u32 ar9485Modes_high_ob_db_tx_gain_1_1[][5] = { {0x0000a2e0, 0x00000000, 0x00000000, 0xffc63a84, 0xffc63a84}, {0x0000a2e4, 0x00000000, 0x00000000, 0xfe0fc000, 0xfe0fc000}, {0x0000a2e8, 0x00000000, 0x00000000, 0xfff00000, 0xfff00000}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050da, 0x000050da}, + {0x0000a458, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000}, + {0x0000a504, 0x05062002, 0x05062002, 0x04000002, 0x04000002}, + {0x0000a508, 0x0c002e00, 0x0c002e00, 0x08000004, 0x08000004}, + {0x0000a50c, 0x11062202, 0x11062202, 0x0d000200, 0x0d000200}, + {0x0000a510, 0x17022e00, 0x17022e00, 0x11000202, 0x11000202}, + {0x0000a514, 0x1d000ec2, 0x1d000ec2, 0x15000400, 0x15000400}, + {0x0000a518, 0x25020ec0, 0x25020ec0, 0x19000402, 0x19000402}, + {0x0000a51c, 0x2b020ec3, 0x2b020ec3, 0x1d000404, 0x1d000404}, + {0x0000a520, 0x2f001f04, 0x2f001f04, 0x21000603, 0x21000603}, + {0x0000a524, 0x35001fc4, 0x35001fc4, 0x25000605, 0x25000605}, + {0x0000a528, 0x3c022f04, 0x3c022f04, 0x2a000a03, 0x2a000a03}, + {0x0000a52c, 0x41023e85, 0x41023e85, 0x2c000a04, 0x2c000a04}, + {0x0000a530, 0x48023ec6, 0x48023ec6, 0x34000e20, 0x34000e20}, + {0x0000a534, 0x4d023f01, 0x4d023f01, 0x35000e21, 0x35000e21}, + {0x0000a538, 0x53023f4b, 0x53023f4b, 0x43000e62, 0x43000e62}, + {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x45000e63, 0x45000e63}, + {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x49000e65, 0x49000e65}, + {0x0000a544, 0x6502feca, 0x6502feca, 0x4b000e66, 0x4b000e66}, + {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4d001645, 0x4d001645}, + {0x0000a54c, 0x7203feca, 0x7203feca, 0x51001865, 0x51001865}, + {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x55001a86, 0x55001a86}, + {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x57001ce9, 0x57001ce9}, + {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5a001ceb, 0x5a001ceb}, + {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x5e001eeb, 0x5e001eeb}, + {0x0000a560, 0x900fff0b, 0x900fff0b, 0x62001eee, 0x62001eee}, + {0x0000a564, 0x960fffcb, 0x960fffcb, 0x66001ff6, 0x66001ff6}, + {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x66001ff6, 0x66001ff6}, + {0x0000a580, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a584, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a588, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a58c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a590, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a594, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a598, 0x00000000, 0x00000000, 0x01404501, 0x01404501}, + {0x0000a59c, 0x00000000, 0x00000000, 0x02808a02, 0x02808a02}, + {0x0000a5a0, 0x00000000, 0x00000000, 0x02808a02, 0x02808a02}, + {0x0000a5a4, 0x00000000, 0x00000000, 0x02808803, 0x02808803}, + {0x0000a5a8, 0x00000000, 0x00000000, 0x04c14b04, 0x04c14b04}, + {0x0000a5ac, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5b0, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5b4, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5b8, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000a5bc, 0x00000000, 0x00000000, 0x04c15305, 0x04c15305}, + {0x0000b500, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b504, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b508, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b50c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b510, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b514, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b518, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b51c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b520, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b524, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b528, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b52c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b530, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b534, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b538, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b53c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b540, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b544, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b548, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b54c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b550, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b554, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b558, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b55c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b560, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b564, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b568, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b56c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b570, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b574, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b578, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000b57c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x00016044, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db, 0x05d6b2db}, + {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, +}; + +static const u32 ar9485Modes_low_ob_db_tx_gain_1_1[][5] = { + /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ + {0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002}, + {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0x7999a83a, 0x7999a83a}, + {0x0000a2dc, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, + {0x0000a2e0, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, + {0x0000a2e4, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, + {0x0000a2e8, 0x00000000, 0x00000000, 0xfe2d3552, 0xfe2d3552}, {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, {0x0000a458, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a500, 0x00022200, 0x00022200, 0x00000000, 0x00000000}, @@ -427,7 +553,7 @@ static const u32 ar9485Modes_high_ob_db_tx_gain_1_1[][5] = { {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, }; -static const u32 ar9485Modes_low_ob_db_tx_gain_1_1[][5] = { +static const u32 ar9485_modes_lowest_ob_db_tx_gain_1_1[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x000098bc, 0x00000002, 0x00000002, 0x00000002, 0x00000002}, {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0x7999a83a, 0x7999a83a}, @@ -521,12 +647,15 @@ static const u32 ar9485Modes_low_ob_db_tx_gain_1_1[][5] = { {0x00016048, 0x6c924260, 0x6c924260, 0x6c924260, 0x6c924260}, }; -#define ar9485_modes_lowest_ob_db_tx_gain_1_1 ar9485Modes_low_ob_db_tx_gain_1_1 - static const u32 ar9485Modes_green_spur_ob_db_tx_gain_1_1[][5] = { /* Addr 5G_HT20 5G_HT40 2G_HT40 2G_HT20 */ {0x000098bc, 0x00000003, 0x00000003, 0x00000003, 0x00000003}, - {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d8, 0x000050d8}, + {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0x7999a83a, 0x7999a83a}, + {0x0000a2dc, 0x00000000, 0x00000000, 0xffad452a, 0xffad452a}, + {0x0000a2e0, 0x00000000, 0x00000000, 0xffc98634, 0xffc98634}, + {0x0000a2e4, 0x00000000, 0x00000000, 0xfff60780, 0xfff60780}, + {0x0000a2e8, 0x00000000, 0x00000000, 0xfffff800, 0xfffff800}, + {0x0000a410, 0x000050d9, 0x000050d9, 0x000050d9, 0x000050d9}, {0x0000a458, 0x80000000, 0x80000000, 0x80000000, 0x80000000}, {0x0000a500, 0x00022200, 0x00022200, 0x00000006, 0x00000006}, {0x0000a504, 0x05062002, 0x05062002, 0x03000201, 0x03000201}, @@ -543,23 +672,39 @@ static const u32 ar9485Modes_green_spur_ob_db_tx_gain_1_1[][5] = { {0x0000a530, 0x48023ec6, 0x48023ec6, 0x310006e0, 0x310006e0}, {0x0000a534, 0x4d023f01, 0x4d023f01, 0x330006e0, 0x330006e0}, {0x0000a538, 0x53023f4b, 0x53023f4b, 0x3e0008e3, 0x3e0008e3}, - {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x410008e5, 0x410008e5}, - {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x430008e6, 0x430008e6}, - {0x0000a544, 0x6502feca, 0x6502feca, 0x4a0008ec, 0x4a0008ec}, - {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x4e0008f1, 0x4e0008f1}, - {0x0000a54c, 0x7203feca, 0x7203feca, 0x520008f3, 0x520008f3}, - {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x54000eed, 0x54000eed}, - {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x58000ef1, 0x58000ef1}, - {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x5c000ef3, 0x5c000ef3}, - {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x60000ef5, 0x60000ef5}, - {0x0000a560, 0x900fff0b, 0x900fff0b, 0x62000ef6, 0x62000ef6}, - {0x0000a564, 0x960fffcb, 0x960fffcb, 0x62000ef6, 0x62000ef6}, - {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, - {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, - {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, - {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, - {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, - {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a53c, 0x5a027f09, 0x5a027f09, 0x430008e6, 0x430008e6}, + {0x0000a540, 0x5f027fc9, 0x5f027fc9, 0x4a0008ec, 0x4a0008ec}, + {0x0000a544, 0x6502feca, 0x6502feca, 0x4e0008f1, 0x4e0008f1}, + {0x0000a548, 0x6b02ff4a, 0x6b02ff4a, 0x520008f3, 0x520008f3}, + {0x0000a54c, 0x7203feca, 0x7203feca, 0x54000eed, 0x54000eed}, + {0x0000a550, 0x7703ff0b, 0x7703ff0b, 0x58000ef1, 0x58000ef1}, + {0x0000a554, 0x7d06ffcb, 0x7d06ffcb, 0x5c000ef3, 0x5c000ef3}, + {0x0000a558, 0x8407ff0b, 0x8407ff0b, 0x62000ef6, 0x62000ef6}, + {0x0000a55c, 0x8907ffcb, 0x8907ffcb, 0x66001ff0, 0x66001ff0}, + {0x0000a560, 0x900fff0b, 0x900fff0b, 0x68001ff6, 0x68001ff6}, + {0x0000a564, 0x960fffcb, 0x960fffcb, 0x68001ff6, 0x68001ff6}, + {0x0000a568, 0x9c1fff0b, 0x9c1fff0b, 0x68001ff6, 0x68001ff6}, + {0x0000a56c, 0x9c1fff0b, 0x9c1fff0b, 0x68001ff6, 0x68001ff6}, + {0x0000a570, 0x9c1fff0b, 0x9c1fff0b, 0x68001ff6, 0x68001ff6}, + {0x0000a574, 0x9c1fff0b, 0x9c1fff0b, 0x68001ff6, 0x68001ff6}, + {0x0000a578, 0x9c1fff0b, 0x9c1fff0b, 0x68001ff6, 0x68001ff6}, + {0x0000a57c, 0x9c1fff0b, 0x9c1fff0b, 0x68001ff6, 0x68001ff6}, + {0x0000a580, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a584, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a588, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, + {0x0000a58c, 0x00000000, 0x00000000, 0x01804000, 0x01804000}, + {0x0000a590, 0x00000000, 0x00000000, 0x02808a02, 0x02808a02}, + {0x0000a594, 0x00000000, 0x00000000, 0x0340ca02, 0x0340ca02}, + {0x0000a598, 0x00000000, 0x00000000, 0x0340cd03, 0x0340cd03}, + {0x0000a59c, 0x00000000, 0x00000000, 0x0340cd03, 0x0340cd03}, + {0x0000a5a0, 0x00000000, 0x00000000, 0x06415304, 0x06415304}, + {0x0000a5a4, 0x00000000, 0x00000000, 0x04c11905, 0x04c11905}, + {0x0000a5a8, 0x00000000, 0x00000000, 0x06415905, 0x06415905}, + {0x0000a5ac, 0x00000000, 0x00000000, 0x06415905, 0x06415905}, + {0x0000a5b0, 0x00000000, 0x00000000, 0x06415905, 0x06415905}, + {0x0000a5b4, 0x00000000, 0x00000000, 0x06415905, 0x06415905}, + {0x0000a5b8, 0x00000000, 0x00000000, 0x06415905, 0x06415905}, + {0x0000a5bc, 0x00000000, 0x00000000, 0x06415905, 0x06415905}, {0x0000b500, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, {0x0000b504, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, {0x0000b508, 0x0000001a, 0x0000001a, 0x0000001a, 0x0000001a}, @@ -823,6 +968,7 @@ static const u32 ar9485_common_rx_gain_1_1[][2] = { {0x00009e00, 0x03721b20}, {0x00009e04, 0x00082020}, {0x00009e18, 0x0300501e}, + {0x00009e20, 0x000003ba}, {0x00009e2c, 0x00002e21}, {0x00009e44, 0x02182324}, {0x0000a000, 0x00060005}, @@ -1001,7 +1147,6 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = { {0x00009e10, 0x7ec88d2e, 0x7ec88d2e, 0x7ec80d2e, 0x7ec80d2e}, {0x00009e14, 0x31395d53, 0x31396053, 0x312e6053, 0x312e5d53}, {0x00009e1c, 0x0001cf9c, 0x0001cf9c, 0x00021f9c, 0x00021f9c}, - {0x00009e20, 0x000003b5, 0x000003b5, 0x000003ce, 0x000003ce}, {0x00009e3c, 0xcf946220, 0xcf946220, 0xcf946222, 0xcf946222}, {0x00009e48, 0x5030201a, 0x5030201a, 0x50302010, 0x50302010}, {0x00009fc8, 0x0003f000, 0x0003f000, 0x0001a000, 0x0001a000}, @@ -1020,7 +1165,7 @@ static const u32 ar9485_1_1_baseband_postamble[][5] = { {0x0000a284, 0x00000000, 0x00000000, 0x000002a0, 0x000002a0}, {0x0000a288, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, {0x0000a28c, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, - {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00058d18, 0x00058d18}, + {0x0000a2c4, 0x00158d18, 0x00158d18, 0x00158d18, 0x00158d18}, {0x0000a2d0, 0x00071981, 0x00071981, 0x00071982, 0x00071982}, {0x0000a2d8, 0xf999a83a, 0xf999a83a, 0xf999a83a, 0xf999a83a}, {0x0000a358, 0x00000000, 0x00000000, 0x00000000, 0x00000000}, @@ -1206,6 +1351,11 @@ static const u32 ar9485_1_1_mac_core[][2] = { {0x000083d0, 0x000301ff}, }; -#define ar9485_1_1_baseband_core_txfir_coeff_japan_2484 ar9462_2p0_baseband_core_txfir_coeff_japan_2484 +static const u32 ar9485_1_1_baseband_core_txfir_coeff_japan_2484[][2] = { + /* Addr allmodes */ + {0x0000a398, 0x00000000}, + {0x0000a39c, 0x6f7f0301}, + {0x0000a3a0, 0xca9228ee}, +}; #endif /* INITVALS_9485_H */ -- cgit v0.10.2 From bf7c756c5d653a63c9bbef4686ae57efcfdaee3d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Thu, 5 Sep 2013 10:56:54 +0530 Subject: ath9k: Add DELL 1707 to supported card table Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/pci.c b/drivers/net/wireless/ath/ath9k/pci.c index 1aa757a..7e4c252 100644 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c @@ -379,6 +379,11 @@ static DEFINE_PCI_DEVICE_TABLE(ath_pci_id_table) = { PCI_VENDOR_ID_HP, 0x217F), .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, + { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, + 0x0036, + PCI_VENDOR_ID_DELL, + 0x020E), + .driver_data = ATH9K_PCI_AR9565_1ANT | ATH9K_PCI_BT_ANT_DIV }, /* WB335 2-ANT */ { PCI_DEVICE_SUB(PCI_VENDOR_ID_ATHEROS, -- cgit v0.10.2 From 5e88ba6228e66741811992a6c1d7cf37195ed4be Mon Sep 17 00:00:00 2001 From: Zefir Kurtisi Date: Thu, 5 Sep 2013 14:11:57 +0200 Subject: ath9k: replace snprintf() with scnprintf() Whenever the return value of snprintf() is used to calculate remaining buffer-space, we wanted to use sncprintf() instead. Indentation is adapted where possible. Some lines exceed the line width limit, either they did it already before, or since they can not be broken reasonably well. Signed-off-by: Zefir Kurtisi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c index 5982256..1ec5235 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.c @@ -3427,12 +3427,12 @@ static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, struct ar9300_base_eep_hdr *pBase; if (!dump_base_hdr) { - len += snprintf(buf + len, size - len, - "%20s :\n", "2GHz modal Header"); + len += scnprintf(buf + len, size - len, + "%20s :\n", "2GHz modal Header"); len = ar9003_dump_modal_eeprom(buf, len, size, &eep->modalHeader2G); - len += snprintf(buf + len, size - len, - "%20s :\n", "5GHz modal Header"); + len += scnprintf(buf + len, size - len, + "%20s :\n", "5GHz modal Header"); len = ar9003_dump_modal_eeprom(buf, len, size, &eep->modalHeader5G); goto out; @@ -3482,8 +3482,8 @@ static u32 ath9k_hw_ar9003_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, PR_EEP("Rx Gain", pBase->txrxgain & 0xf); PR_EEP("SW Reg", le32_to_cpu(pBase->swreg)); - len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", - ah->eeprom.ar9300_eep.macAddr); + len += scnprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", + ah->eeprom.ar9300_eep.macAddr); out: if (len > size) len = size; diff --git a/drivers/net/wireless/ath/ath9k/ath9k.h b/drivers/net/wireless/ath/ath9k/ath9k.h index 5fd4294..8878f2d 100644 --- a/drivers/net/wireless/ath/ath9k/ath9k.h +++ b/drivers/net/wireless/ath/ath9k/ath9k.h @@ -459,8 +459,8 @@ void ath9k_queue_reset(struct ath_softc *sc, enum ath_reset_type type); #define ATH_DUMP_BTCOEX(_s, _val) \ do { \ - len += snprintf(buf + len, size - len, \ - "%20s : %10d\n", _s, (_val)); \ + len += scnprintf(buf + len, size - len, \ + "%20s : %10d\n", _s, (_val)); \ } while (0) enum bt_op_flags { diff --git a/drivers/net/wireless/ath/ath9k/debug.c b/drivers/net/wireless/ath/ath9k/debug.c index c088744..1be2c78 100644 --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c @@ -104,37 +104,37 @@ static ssize_t read_file_ani(struct file *file, char __user *user_buf, return -ENOMEM; if (common->disable_ani) { - len += snprintf(buf + len, size - len, "%s: %s\n", - "ANI", "DISABLED"); + len += scnprintf(buf + len, size - len, "%s: %s\n", + "ANI", "DISABLED"); goto exit; } - len += snprintf(buf + len, size - len, "%15s: %s\n", - "ANI", "ENABLED"); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "ANI RESET", ah->stats.ast_ani_reset); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "SPUR UP", ah->stats.ast_ani_spurup); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "SPUR DOWN", ah->stats.ast_ani_spurup); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "MRC-CCK ON", ah->stats.ast_ani_ccklow); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "MRC-CCK OFF", ah->stats.ast_ani_cckhigh); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "FIR-STEP UP", ah->stats.ast_ani_stepup); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "FIR-STEP DOWN", ah->stats.ast_ani_stepdown); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs); - len += snprintf(buf + len, size - len, "%15s: %u\n", - "CCK ERRORS", ah->stats.ast_ani_cckerrs); + len += scnprintf(buf + len, size - len, "%15s: %s\n", + "ANI", "ENABLED"); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "ANI RESET", ah->stats.ast_ani_reset); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "SPUR UP", ah->stats.ast_ani_spurup); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "SPUR DOWN", ah->stats.ast_ani_spurup); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "OFDM WS-DET ON", ah->stats.ast_ani_ofdmon); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "OFDM WS-DET OFF", ah->stats.ast_ani_ofdmoff); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "MRC-CCK ON", ah->stats.ast_ani_ccklow); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "MRC-CCK OFF", ah->stats.ast_ani_cckhigh); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "FIR-STEP UP", ah->stats.ast_ani_stepup); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "FIR-STEP DOWN", ah->stats.ast_ani_stepdown); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "INV LISTENTIME", ah->stats.ast_ani_lneg_or_lzero); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "OFDM ERRORS", ah->stats.ast_ani_ofdmerrs); + len += scnprintf(buf + len, size - len, "%15s: %u\n", + "CCK ERRORS", ah->stats.ast_ani_cckerrs); exit: if (len > size) len = size; @@ -280,70 +280,70 @@ static ssize_t read_file_antenna_diversity(struct file *file, return -ENOMEM; if (!(pCap->hw_caps & ATH9K_HW_CAP_ANT_DIV_COMB)) { - len += snprintf(buf + len, size - len, "%s\n", - "Antenna Diversity Combining is disabled"); + len += scnprintf(buf + len, size - len, "%s\n", + "Antenna Diversity Combining is disabled"); goto exit; } ath9k_ps_wakeup(sc); ath9k_hw_antdiv_comb_conf_get(ah, &div_ant_conf); - len += snprintf(buf + len, size - len, "Current MAIN config : %s\n", - lna_conf_str[div_ant_conf.main_lna_conf]); - len += snprintf(buf + len, size - len, "Current ALT config : %s\n", - lna_conf_str[div_ant_conf.alt_lna_conf]); - len += snprintf(buf + len, size - len, "Average MAIN RSSI : %d\n", - as_main->rssi_avg); - len += snprintf(buf + len, size - len, "Average ALT RSSI : %d\n\n", - as_alt->rssi_avg); + len += scnprintf(buf + len, size - len, "Current MAIN config : %s\n", + lna_conf_str[div_ant_conf.main_lna_conf]); + len += scnprintf(buf + len, size - len, "Current ALT config : %s\n", + lna_conf_str[div_ant_conf.alt_lna_conf]); + len += scnprintf(buf + len, size - len, "Average MAIN RSSI : %d\n", + as_main->rssi_avg); + len += scnprintf(buf + len, size - len, "Average ALT RSSI : %d\n\n", + as_alt->rssi_avg); ath9k_ps_restore(sc); - len += snprintf(buf + len, size - len, "Packet Receive Cnt:\n"); - len += snprintf(buf + len, size - len, "-------------------\n"); - - len += snprintf(buf + len, size - len, "%30s%15s\n", - "MAIN", "ALT"); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "TOTAL COUNT", - as_main->recv_cnt, - as_alt->recv_cnt); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA1", - as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1], - as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1]); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA2", - as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA2], - as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA2]); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA1 + LNA2", - as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2], - as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2]); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA1 - LNA2", - as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2], - as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2]); - - len += snprintf(buf + len, size - len, "\nLNA Config Attempts:\n"); - len += snprintf(buf + len, size - len, "--------------------\n"); - - len += snprintf(buf + len, size - len, "%30s%15s\n", - "MAIN", "ALT"); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA1", - as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1], - as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1]); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA2", - as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA2], - as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA2]); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA1 + LNA2", - as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2], - as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2]); - len += snprintf(buf + len, size - len, "%-14s:%15d%15d\n", - "LNA1 - LNA2", - as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2], - as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2]); + len += scnprintf(buf + len, size - len, "Packet Receive Cnt:\n"); + len += scnprintf(buf + len, size - len, "-------------------\n"); + + len += scnprintf(buf + len, size - len, "%30s%15s\n", + "MAIN", "ALT"); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "TOTAL COUNT", + as_main->recv_cnt, + as_alt->recv_cnt); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA1", + as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1], + as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1]); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA2", + as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA2], + as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA2]); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA1 + LNA2", + as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2], + as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2]); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA1 - LNA2", + as_main->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2], + as_alt->lna_recv_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2]); + + len += scnprintf(buf + len, size - len, "\nLNA Config Attempts:\n"); + len += scnprintf(buf + len, size - len, "--------------------\n"); + + len += scnprintf(buf + len, size - len, "%30s%15s\n", + "MAIN", "ALT"); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA1", + as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1], + as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1]); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA2", + as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA2], + as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA2]); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA1 + LNA2", + as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2], + as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_PLUS_LNA2]); + len += scnprintf(buf + len, size - len, "%-14s:%15d%15d\n", + "LNA1 - LNA2", + as_main->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2], + as_alt->lna_attempt_cnt[ATH_ANT_DIV_COMB_LNA1_MINUS_LNA2]); exit: if (len > size) @@ -385,21 +385,21 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf, (AR_MACMISC_MISC_OBS_BUS_1 << AR_MACMISC_MISC_OBS_BUS_MSB_S))); - len += snprintf(buf + len, DMA_BUF_LEN - len, - "Raw DMA Debug values:\n"); + len += scnprintf(buf + len, DMA_BUF_LEN - len, + "Raw DMA Debug values:\n"); for (i = 0; i < ATH9K_NUM_DMA_DEBUG_REGS; i++) { if (i % 4 == 0) - len += snprintf(buf + len, DMA_BUF_LEN - len, "\n"); + len += scnprintf(buf + len, DMA_BUF_LEN - len, "\n"); val[i] = REG_READ_D(ah, AR_DMADBG_0 + (i * sizeof(u32))); - len += snprintf(buf + len, DMA_BUF_LEN - len, "%d: %08x ", - i, val[i]); + len += scnprintf(buf + len, DMA_BUF_LEN - len, "%d: %08x ", + i, val[i]); } - len += snprintf(buf + len, DMA_BUF_LEN - len, "\n\n"); - len += snprintf(buf + len, DMA_BUF_LEN - len, - "Num QCU: chain_st fsp_ok fsp_st DCU: chain_st\n"); + len += scnprintf(buf + len, DMA_BUF_LEN - len, "\n\n"); + len += scnprintf(buf + len, DMA_BUF_LEN - len, + "Num QCU: chain_st fsp_ok fsp_st DCU: chain_st\n"); for (i = 0; i < ATH9K_NUM_QUEUES; i++, qcuOffset += 4, dcuOffset += 5) { if (i == 8) { @@ -412,39 +412,39 @@ static ssize_t read_file_dma(struct file *file, char __user *user_buf, dcuBase++; } - len += snprintf(buf + len, DMA_BUF_LEN - len, - "%2d %2x %1x %2x %2x\n", - i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset, - (*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset + 3), - val[2] & (0x7 << (i * 3)) >> (i * 3), - (*dcuBase & (0x1f << dcuOffset)) >> dcuOffset); + len += scnprintf(buf + len, DMA_BUF_LEN - len, + "%2d %2x %1x %2x %2x\n", + i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset, + (*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset + 3), + val[2] & (0x7 << (i * 3)) >> (i * 3), + (*dcuBase & (0x1f << dcuOffset)) >> dcuOffset); } - len += snprintf(buf + len, DMA_BUF_LEN - len, "\n"); + len += scnprintf(buf + len, DMA_BUF_LEN - len, "\n"); - len += snprintf(buf + len, DMA_BUF_LEN - len, + len += scnprintf(buf + len, DMA_BUF_LEN - len, "qcu_stitch state: %2x qcu_fetch state: %2x\n", (val[3] & 0x003c0000) >> 18, (val[3] & 0x03c00000) >> 22); - len += snprintf(buf + len, DMA_BUF_LEN - len, + len += scnprintf(buf + len, DMA_BUF_LEN - len, "qcu_complete state: %2x dcu_complete state: %2x\n", (val[3] & 0x1c000000) >> 26, (val[6] & 0x3)); - len += snprintf(buf + len, DMA_BUF_LEN - len, + len += scnprintf(buf + len, DMA_BUF_LEN - len, "dcu_arb state: %2x dcu_fp state: %2x\n", (val[5] & 0x06000000) >> 25, (val[5] & 0x38000000) >> 27); - len += snprintf(buf + len, DMA_BUF_LEN - len, + len += scnprintf(buf + len, DMA_BUF_LEN - len, "chan_idle_dur: %3d chan_idle_dur_valid: %1d\n", (val[6] & 0x000003fc) >> 2, (val[6] & 0x00000400) >> 10); - len += snprintf(buf + len, DMA_BUF_LEN - len, + len += scnprintf(buf + len, DMA_BUF_LEN - len, "txfifo_valid_0: %1d txfifo_valid_1: %1d\n", (val[6] & 0x00000800) >> 11, (val[6] & 0x00001000) >> 12); - len += snprintf(buf + len, DMA_BUF_LEN - len, + len += scnprintf(buf + len, DMA_BUF_LEN - len, "txfifo_dcu_num_0: %2d txfifo_dcu_num_1: %2d\n", (val[6] & 0x0001e000) >> 13, (val[6] & 0x001e0000) >> 17); - len += snprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x\n", - REG_READ_D(ah, AR_OBS_BUS_1)); - len += snprintf(buf + len, DMA_BUF_LEN - len, - "AR_CR: 0x%x\n", REG_READ_D(ah, AR_CR)); + len += scnprintf(buf + len, DMA_BUF_LEN - len, "pcu observe: 0x%x\n", + REG_READ_D(ah, AR_OBS_BUS_1)); + len += scnprintf(buf + len, DMA_BUF_LEN - len, + "AR_CR: 0x%x\n", REG_READ_D(ah, AR_CR)); ath9k_ps_restore(sc); @@ -530,9 +530,9 @@ static ssize_t read_file_interrupt(struct file *file, char __user *user_buf, #define PR_IS(a, s) \ do { \ - len += snprintf(buf + len, mxlen - len, \ - "%21s: %10u\n", a, \ - sc->debug.stats.istats.s); \ + len += scnprintf(buf + len, mxlen - len, \ + "%21s: %10u\n", a, \ + sc->debug.stats.istats.s); \ } while (0) if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) { @@ -563,8 +563,8 @@ static ssize_t read_file_interrupt(struct file *file, char __user *user_buf, PR_IS("GENTIMER", gen_timer); PR_IS("TOTAL", total); - len += snprintf(buf + len, mxlen - len, - "SYNC_CAUSE stats:\n"); + len += scnprintf(buf + len, mxlen - len, + "SYNC_CAUSE stats:\n"); PR_IS("Sync-All", sync_cause_all); PR_IS("RTC-IRQ", sync_rtc_irq); @@ -655,16 +655,16 @@ static ssize_t print_queue(struct ath_softc *sc, struct ath_txq *txq, ath_txq_lock(sc, txq); - len += snprintf(buf + len, size - len, "%s: %d ", - "qnum", txq->axq_qnum); - len += snprintf(buf + len, size - len, "%s: %2d ", - "qdepth", txq->axq_depth); - len += snprintf(buf + len, size - len, "%s: %2d ", - "ampdu-depth", txq->axq_ampdu_depth); - len += snprintf(buf + len, size - len, "%s: %3d ", - "pending", txq->pending_frames); - len += snprintf(buf + len, size - len, "%s: %d\n", - "stopped", txq->stopped); + len += scnprintf(buf + len, size - len, "%s: %d ", + "qnum", txq->axq_qnum); + len += scnprintf(buf + len, size - len, "%s: %2d ", + "qdepth", txq->axq_depth); + len += scnprintf(buf + len, size - len, "%s: %2d ", + "ampdu-depth", txq->axq_ampdu_depth); + len += scnprintf(buf + len, size - len, "%s: %3d ", + "pending", txq->pending_frames); + len += scnprintf(buf + len, size - len, "%s: %d\n", + "stopped", txq->stopped); ath_txq_unlock(sc, txq); return len; @@ -687,11 +687,11 @@ static ssize_t read_file_queues(struct file *file, char __user *user_buf, for (i = 0; i < IEEE80211_NUM_ACS; i++) { txq = sc->tx.txq_map[i]; - len += snprintf(buf + len, size - len, "(%s): ", qname[i]); + len += scnprintf(buf + len, size - len, "(%s): ", qname[i]); len += print_queue(sc, txq, buf + len, size - len); } - len += snprintf(buf + len, size - len, "(CAB): "); + len += scnprintf(buf + len, size - len, "(CAB): "); len += print_queue(sc, sc->beacon.cabq, buf + len, size - len); if (len > size) @@ -716,80 +716,82 @@ static ssize_t read_file_misc(struct file *file, char __user *user_buf, unsigned int reg; u32 rxfilter; - len += snprintf(buf + len, sizeof(buf) - len, - "BSSID: %pM\n", common->curbssid); - len += snprintf(buf + len, sizeof(buf) - len, - "BSSID-MASK: %pM\n", common->bssidmask); - len += snprintf(buf + len, sizeof(buf) - len, - "OPMODE: %s\n", ath_opmode_to_string(sc->sc_ah->opmode)); + len += scnprintf(buf + len, sizeof(buf) - len, + "BSSID: %pM\n", common->curbssid); + len += scnprintf(buf + len, sizeof(buf) - len, + "BSSID-MASK: %pM\n", common->bssidmask); + len += scnprintf(buf + len, sizeof(buf) - len, + "OPMODE: %s\n", + ath_opmode_to_string(sc->sc_ah->opmode)); ath9k_ps_wakeup(sc); rxfilter = ath9k_hw_getrxfilter(sc->sc_ah); ath9k_ps_restore(sc); - len += snprintf(buf + len, sizeof(buf) - len, - "RXFILTER: 0x%x", rxfilter); + len += scnprintf(buf + len, sizeof(buf) - len, + "RXFILTER: 0x%x", rxfilter); if (rxfilter & ATH9K_RX_FILTER_UCAST) - len += snprintf(buf + len, sizeof(buf) - len, " UCAST"); + len += scnprintf(buf + len, sizeof(buf) - len, " UCAST"); if (rxfilter & ATH9K_RX_FILTER_MCAST) - len += snprintf(buf + len, sizeof(buf) - len, " MCAST"); + len += scnprintf(buf + len, sizeof(buf) - len, " MCAST"); if (rxfilter & ATH9K_RX_FILTER_BCAST) - len += snprintf(buf + len, sizeof(buf) - len, " BCAST"); + len += scnprintf(buf + len, sizeof(buf) - len, " BCAST"); if (rxfilter & ATH9K_RX_FILTER_CONTROL) - len += snprintf(buf + len, sizeof(buf) - len, " CONTROL"); + len += scnprintf(buf + len, sizeof(buf) - len, " CONTROL"); if (rxfilter & ATH9K_RX_FILTER_BEACON) - len += snprintf(buf + len, sizeof(buf) - len, " BEACON"); + len += scnprintf(buf + len, sizeof(buf) - len, " BEACON"); if (rxfilter & ATH9K_RX_FILTER_PROM) - len += snprintf(buf + len, sizeof(buf) - len, " PROM"); + len += scnprintf(buf + len, sizeof(buf) - len, " PROM"); if (rxfilter & ATH9K_RX_FILTER_PROBEREQ) - len += snprintf(buf + len, sizeof(buf) - len, " PROBEREQ"); + len += scnprintf(buf + len, sizeof(buf) - len, " PROBEREQ"); if (rxfilter & ATH9K_RX_FILTER_PHYERR) - len += snprintf(buf + len, sizeof(buf) - len, " PHYERR"); + len += scnprintf(buf + len, sizeof(buf) - len, " PHYERR"); if (rxfilter & ATH9K_RX_FILTER_MYBEACON) - len += snprintf(buf + len, sizeof(buf) - len, " MYBEACON"); + len += scnprintf(buf + len, sizeof(buf) - len, " MYBEACON"); if (rxfilter & ATH9K_RX_FILTER_COMP_BAR) - len += snprintf(buf + len, sizeof(buf) - len, " COMP_BAR"); + len += scnprintf(buf + len, sizeof(buf) - len, " COMP_BAR"); if (rxfilter & ATH9K_RX_FILTER_PSPOLL) - len += snprintf(buf + len, sizeof(buf) - len, " PSPOLL"); + len += scnprintf(buf + len, sizeof(buf) - len, " PSPOLL"); if (rxfilter & ATH9K_RX_FILTER_PHYRADAR) - len += snprintf(buf + len, sizeof(buf) - len, " PHYRADAR"); + len += scnprintf(buf + len, sizeof(buf) - len, " PHYRADAR"); if (rxfilter & ATH9K_RX_FILTER_MCAST_BCAST_ALL) - len += snprintf(buf + len, sizeof(buf) - len, " MCAST_BCAST_ALL"); + len += scnprintf(buf + len, sizeof(buf) - len, " MCAST_BCAST_ALL"); if (rxfilter & ATH9K_RX_FILTER_CONTROL_WRAPPER) - len += snprintf(buf + len, sizeof(buf) - len, " CONTROL_WRAPPER"); + len += scnprintf(buf + len, sizeof(buf) - len, " CONTROL_WRAPPER"); - len += snprintf(buf + len, sizeof(buf) - len, "\n"); + len += scnprintf(buf + len, sizeof(buf) - len, "\n"); reg = sc->sc_ah->imask; - len += snprintf(buf + len, sizeof(buf) - len, "INTERRUPT-MASK: 0x%x", reg); + len += scnprintf(buf + len, sizeof(buf) - len, + "INTERRUPT-MASK: 0x%x", reg); if (reg & ATH9K_INT_SWBA) - len += snprintf(buf + len, sizeof(buf) - len, " SWBA"); + len += scnprintf(buf + len, sizeof(buf) - len, " SWBA"); if (reg & ATH9K_INT_BMISS) - len += snprintf(buf + len, sizeof(buf) - len, " BMISS"); + len += scnprintf(buf + len, sizeof(buf) - len, " BMISS"); if (reg & ATH9K_INT_CST) - len += snprintf(buf + len, sizeof(buf) - len, " CST"); + len += scnprintf(buf + len, sizeof(buf) - len, " CST"); if (reg & ATH9K_INT_RX) - len += snprintf(buf + len, sizeof(buf) - len, " RX"); + len += scnprintf(buf + len, sizeof(buf) - len, " RX"); if (reg & ATH9K_INT_RXHP) - len += snprintf(buf + len, sizeof(buf) - len, " RXHP"); + len += scnprintf(buf + len, sizeof(buf) - len, " RXHP"); if (reg & ATH9K_INT_RXLP) - len += snprintf(buf + len, sizeof(buf) - len, " RXLP"); + len += scnprintf(buf + len, sizeof(buf) - len, " RXLP"); if (reg & ATH9K_INT_BB_WATCHDOG) - len += snprintf(buf + len, sizeof(buf) - len, " BB_WATCHDOG"); + len += scnprintf(buf + len, sizeof(buf) - len, " BB_WATCHDOG"); - len += snprintf(buf + len, sizeof(buf) - len, "\n"); + len += scnprintf(buf + len, sizeof(buf) - len, "\n"); ath9k_calculate_iter_data(hw, NULL, &iter_data); - len += snprintf(buf + len, sizeof(buf) - len, - "VIF-COUNTS: AP: %i STA: %i MESH: %i WDS: %i" - " ADHOC: %i TOTAL: %hi BEACON-VIF: %hi\n", - iter_data.naps, iter_data.nstations, iter_data.nmeshes, - iter_data.nwds, iter_data.nadhocs, - sc->nvifs, sc->nbcnvifs); + len += scnprintf(buf + len, sizeof(buf) - len, + "VIF-COUNTS: AP: %i STA: %i MESH: %i WDS: %i" + " ADHOC: %i TOTAL: %hi BEACON-VIF: %hi\n", + iter_data.naps, iter_data.nstations, iter_data.nmeshes, + iter_data.nwds, iter_data.nadhocs, + sc->nvifs, sc->nbcnvifs); if (len > sizeof(buf)) len = sizeof(buf); @@ -805,27 +807,27 @@ static ssize_t read_file_reset(struct file *file, char __user *user_buf, char buf[512]; unsigned int len = 0; - len += snprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "Baseband Hang", - sc->debug.stats.reset[RESET_TYPE_BB_HANG]); - len += snprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "Baseband Watchdog", - sc->debug.stats.reset[RESET_TYPE_BB_WATCHDOG]); - len += snprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "Fatal HW Error", - sc->debug.stats.reset[RESET_TYPE_FATAL_INT]); - len += snprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "TX HW error", - sc->debug.stats.reset[RESET_TYPE_TX_ERROR]); - len += snprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "TX Path Hang", - sc->debug.stats.reset[RESET_TYPE_TX_HANG]); - len += snprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "PLL RX Hang", - sc->debug.stats.reset[RESET_TYPE_PLL_HANG]); - len += snprintf(buf + len, sizeof(buf) - len, - "%17s: %2d\n", "MCI Reset", - sc->debug.stats.reset[RESET_TYPE_MCI]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%17s: %2d\n", "Baseband Hang", + sc->debug.stats.reset[RESET_TYPE_BB_HANG]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%17s: %2d\n", "Baseband Watchdog", + sc->debug.stats.reset[RESET_TYPE_BB_WATCHDOG]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%17s: %2d\n", "Fatal HW Error", + sc->debug.stats.reset[RESET_TYPE_FATAL_INT]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%17s: %2d\n", "TX HW error", + sc->debug.stats.reset[RESET_TYPE_TX_ERROR]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%17s: %2d\n", "TX Path Hang", + sc->debug.stats.reset[RESET_TYPE_TX_HANG]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%17s: %2d\n", "PLL RX Hang", + sc->debug.stats.reset[RESET_TYPE_PLL_HANG]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%17s: %2d\n", "MCI Reset", + sc->debug.stats.reset[RESET_TYPE_MCI]); if (len > sizeof(buf)) len = sizeof(buf); @@ -902,14 +904,14 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { #define PHY_ERR(s, p) \ - len += snprintf(buf + len, size - len, "%22s : %10u\n", s, \ - sc->debug.stats.rxstats.phy_err_stats[p]); + len += scnprintf(buf + len, size - len, "%22s : %10u\n", s, \ + sc->debug.stats.rxstats.phy_err_stats[p]); #define RXS_ERR(s, e) \ do { \ - len += snprintf(buf + len, size - len, \ - "%22s : %10u\n", s, \ - sc->debug.stats.rxstats.e); \ + len += scnprintf(buf + len, size - len, \ + "%22s : %10u\n", s, \ + sc->debug.stats.rxstats.e);\ } while (0) struct ath_softc *sc = file->private_data; @@ -1439,22 +1441,22 @@ static ssize_t read_file_dump_nfcal(struct file *file, char __user *user_buf, if (!buf) return -ENOMEM; - len += snprintf(buf + len, size - len, - "Channel Noise Floor : %d\n", ah->noise); - len += snprintf(buf + len, size - len, - "Chain | privNF | # Readings | NF Readings\n"); + len += scnprintf(buf + len, size - len, + "Channel Noise Floor : %d\n", ah->noise); + len += scnprintf(buf + len, size - len, + "Chain | privNF | # Readings | NF Readings\n"); for (i = 0; i < NUM_NF_READINGS; i++) { if (!(chainmask & (1 << i)) || ((i >= AR5416_MAX_CHAINS) && !conf_is_ht40(conf))) continue; nread = AR_PHY_CCA_FILTERWINDOW_LENGTH - h[i].invalidNFcount; - len += snprintf(buf + len, size - len, " %d\t %d\t %d\t\t", - i, h[i].privNF, nread); + len += scnprintf(buf + len, size - len, " %d\t %d\t %d\t\t", + i, h[i].privNF, nread); for (j = 0; j < nread; j++) - len += snprintf(buf + len, size - len, - " %d", h[i].nfCalBuffer[j]); - len += snprintf(buf + len, size - len, "\n"); + len += scnprintf(buf + len, size - len, + " %d", h[i].nfCalBuffer[j]); + len += scnprintf(buf + len, size - len, "\n"); } if (len > size) @@ -1543,8 +1545,8 @@ static ssize_t read_file_btcoex(struct file *file, char __user *user_buf, return -ENOMEM; if (!sc->sc_ah->common.btcoex_enabled) { - len = snprintf(buf, size, "%s\n", - "BTCOEX is disabled"); + len = scnprintf(buf, size, "%s\n", + "BTCOEX is disabled"); goto exit; } @@ -1582,43 +1584,43 @@ static ssize_t read_file_node_stat(struct file *file, char __user *user_buf, return -ENOMEM; if (!an->sta->ht_cap.ht_supported) { - len = snprintf(buf, size, "%s\n", - "HT not supported"); + len = scnprintf(buf, size, "%s\n", + "HT not supported"); goto exit; } - len = snprintf(buf, size, "Max-AMPDU: %d\n", - an->maxampdu); - len += snprintf(buf + len, size - len, "MPDU Density: %d\n\n", - an->mpdudensity); + len = scnprintf(buf, size, "Max-AMPDU: %d\n", + an->maxampdu); + len += scnprintf(buf + len, size - len, "MPDU Density: %d\n\n", + an->mpdudensity); - len += snprintf(buf + len, size - len, - "%2s%7s\n", "AC", "SCHED"); + len += scnprintf(buf + len, size - len, + "%2s%7s\n", "AC", "SCHED"); for (acno = 0, ac = &an->ac[acno]; acno < IEEE80211_NUM_ACS; acno++, ac++) { txq = ac->txq; ath_txq_lock(sc, txq); - len += snprintf(buf + len, size - len, - "%2d%7d\n", - acno, ac->sched); + len += scnprintf(buf + len, size - len, + "%2d%7d\n", + acno, ac->sched); ath_txq_unlock(sc, txq); } - len += snprintf(buf + len, size - len, - "\n%3s%11s%10s%10s%10s%10s%9s%6s%8s\n", - "TID", "SEQ_START", "SEQ_NEXT", "BAW_SIZE", - "BAW_HEAD", "BAW_TAIL", "BAR_IDX", "SCHED", "PAUSED"); + len += scnprintf(buf + len, size - len, + "\n%3s%11s%10s%10s%10s%10s%9s%6s%8s\n", + "TID", "SEQ_START", "SEQ_NEXT", "BAW_SIZE", + "BAW_HEAD", "BAW_TAIL", "BAR_IDX", "SCHED", "PAUSED"); for (tidno = 0, tid = &an->tid[tidno]; tidno < IEEE80211_NUM_TIDS; tidno++, tid++) { txq = tid->ac->txq; ath_txq_lock(sc, txq); - len += snprintf(buf + len, size - len, - "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n", - tid->tidno, tid->seq_start, tid->seq_next, - tid->baw_size, tid->baw_head, tid->baw_tail, - tid->bar_index, tid->sched, tid->paused); + len += scnprintf(buf + len, size - len, + "%3d%11d%10d%10d%10d%10d%9d%6d%8d\n", + tid->tidno, tid->seq_start, tid->seq_next, + tid->baw_size, tid->baw_head, tid->baw_tail, + tid->bar_index, tid->sched, tid->paused); ath_txq_unlock(sc, txq); } exit: diff --git a/drivers/net/wireless/ath/ath9k/debug.h b/drivers/net/wireless/ath/ath9k/debug.h index 6e1556f..d6e3fa4 100644 --- a/drivers/net/wireless/ath/ath9k/debug.h +++ b/drivers/net/wireless/ath/ath9k/debug.h @@ -193,12 +193,12 @@ struct ath_tx_stats { #define TXSTATS sc->debug.stats.txstats #define PR(str, elem) \ do { \ - len += snprintf(buf + len, size - len, \ - "%s%13u%11u%10u%10u\n", str, \ - TXSTATS[PR_QNUM(IEEE80211_AC_BE)].elem, \ - TXSTATS[PR_QNUM(IEEE80211_AC_BK)].elem, \ - TXSTATS[PR_QNUM(IEEE80211_AC_VI)].elem, \ - TXSTATS[PR_QNUM(IEEE80211_AC_VO)].elem); \ + len += scnprintf(buf + len, size - len, \ + "%s%13u%11u%10u%10u\n", str, \ + TXSTATS[PR_QNUM(IEEE80211_AC_BE)].elem,\ + TXSTATS[PR_QNUM(IEEE80211_AC_BK)].elem,\ + TXSTATS[PR_QNUM(IEEE80211_AC_VI)].elem,\ + TXSTATS[PR_QNUM(IEEE80211_AC_VO)].elem); \ } while(0) #define RX_STAT_INC(c) (sc->debug.stats.rxstats.c++) diff --git a/drivers/net/wireless/ath/ath9k/dfs_debug.c b/drivers/net/wireless/ath/ath9k/dfs_debug.c index 3c6e413..8215991 100644 --- a/drivers/net/wireless/ath/ath9k/dfs_debug.c +++ b/drivers/net/wireless/ath/ath9k/dfs_debug.c @@ -25,11 +25,11 @@ struct ath_dfs_pool_stats global_dfs_pool_stats = { 0 }; #define ATH9K_DFS_STAT(s, p) \ - len += snprintf(buf + len, size - len, "%28s : %10u\n", s, \ - sc->debug.stats.dfs_stats.p); + len += scnprintf(buf + len, size - len, "%28s : %10u\n", s, \ + sc->debug.stats.dfs_stats.p); #define ATH9K_DFS_POOL_STAT(s, p) \ - len += snprintf(buf + len, size - len, "%28s : %10u\n", s, \ - global_dfs_pool_stats.p); + len += scnprintf(buf + len, size - len, "%28s : %10u\n", s, \ + global_dfs_pool_stats.p); static ssize_t read_file_dfs(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) @@ -44,12 +44,12 @@ static ssize_t read_file_dfs(struct file *file, char __user *user_buf, if (buf == NULL) return -ENOMEM; - len += snprintf(buf + len, size - len, "DFS support for " - "macVersion = 0x%x, macRev = 0x%x: %s\n", - hw_ver->macVersion, hw_ver->macRev, - (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_DFS) ? + len += scnprintf(buf + len, size - len, "DFS support for " + "macVersion = 0x%x, macRev = 0x%x: %s\n", + hw_ver->macVersion, hw_ver->macRev, + (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_DFS) ? "enabled" : "disabled"); - len += snprintf(buf + len, size - len, "Pulse detector statistics:\n"); + len += scnprintf(buf + len, size - len, "Pulse detector statistics:\n"); ATH9K_DFS_STAT("pulse events reported ", pulses_total); ATH9K_DFS_STAT("invalid pulse events ", pulses_no_dfs); ATH9K_DFS_STAT("DFS pulses detected ", pulses_detected); @@ -59,11 +59,12 @@ static ssize_t read_file_dfs(struct file *file, char __user *user_buf, ATH9K_DFS_STAT("Primary channel pulses ", pri_phy_errors); ATH9K_DFS_STAT("Secondary channel pulses", ext_phy_errors); ATH9K_DFS_STAT("Dual channel pulses ", dc_phy_errors); - len += snprintf(buf + len, size - len, "Radar detector statistics " - "(current DFS region: %d)\n", sc->dfs_detector->region); + len += scnprintf(buf + len, size - len, "Radar detector statistics " + "(current DFS region: %d)\n", + sc->dfs_detector->region); ATH9K_DFS_STAT("Pulse events processed ", pulses_processed); ATH9K_DFS_STAT("Radars detected ", radar_detected); - len += snprintf(buf + len, size - len, "Global Pool statistics:\n"); + len += scnprintf(buf + len, size - len, "Global Pool statistics:\n"); ATH9K_DFS_POOL_STAT("Pool references ", pool_reference); ATH9K_DFS_POOL_STAT("Pulses allocated ", pulse_allocated); ATH9K_DFS_POOL_STAT("Pulses alloc error ", pulse_alloc_error); diff --git a/drivers/net/wireless/ath/ath9k/eeprom_4k.c b/drivers/net/wireless/ath/ath9k/eeprom_4k.c index 9ea8e4b..b409171 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_4k.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_4k.c @@ -129,10 +129,10 @@ static u32 ath9k_hw_4k_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, struct base_eep_header_4k *pBase = &eep->baseEepHeader; if (!dump_base_hdr) { - len += snprintf(buf + len, size - len, - "%20s :\n", "2GHz modal Header"); + len += scnprintf(buf + len, size - len, + "%20s :\n", "2GHz modal Header"); len = ath9k_dump_4k_modal_eeprom(buf, len, size, - &eep->modalHeader); + &eep->modalHeader); goto out; } @@ -160,8 +160,8 @@ static u32 ath9k_hw_4k_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, PR_EEP("Cal Bin Build", (pBase->binBuildNumber >> 8) & 0xFF); PR_EEP("TX Gain type", pBase->txGainType); - len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", - pBase->macAddr); + len += scnprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", + pBase->macAddr); out: if (len > size) diff --git a/drivers/net/wireless/ath/ath9k/eeprom_9287.c b/drivers/net/wireless/ath/ath9k/eeprom_9287.c index 3ae1f3d..e1d0c21 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_9287.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_9287.c @@ -125,8 +125,8 @@ static u32 ath9k_hw_ar9287_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, struct base_eep_ar9287_header *pBase = &eep->baseEepHeader; if (!dump_base_hdr) { - len += snprintf(buf + len, size - len, - "%20s :\n", "2GHz modal Header"); + len += scnprintf(buf + len, size - len, + "%20s :\n", "2GHz modal Header"); len = ar9287_dump_modal_eeprom(buf, len, size, &eep->modalHeader); goto out; @@ -157,8 +157,8 @@ static u32 ath9k_hw_ar9287_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, PR_EEP("Power Table Offset", pBase->pwrTableOffset); PR_EEP("OpenLoop Power Ctrl", pBase->openLoopPwrCntl); - len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", - pBase->macAddr); + len += scnprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", + pBase->macAddr); out: if (len > size) diff --git a/drivers/net/wireless/ath/ath9k/eeprom_def.c b/drivers/net/wireless/ath/ath9k/eeprom_def.c index 1c25368..39107e3 100644 --- a/drivers/net/wireless/ath/ath9k/eeprom_def.c +++ b/drivers/net/wireless/ath/ath9k/eeprom_def.c @@ -205,12 +205,12 @@ static u32 ath9k_hw_def_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, struct base_eep_header *pBase = &eep->baseEepHeader; if (!dump_base_hdr) { - len += snprintf(buf + len, size - len, - "%20s :\n", "2GHz modal Header"); + len += scnprintf(buf + len, size - len, + "%20s :\n", "2GHz modal Header"); len = ath9k_def_dump_modal_eeprom(buf, len, size, &eep->modalHeader[0]); - len += snprintf(buf + len, size - len, - "%20s :\n", "5GHz modal Header"); + len += scnprintf(buf + len, size - len, + "%20s :\n", "5GHz modal Header"); len = ath9k_def_dump_modal_eeprom(buf, len, size, &eep->modalHeader[1]); goto out; @@ -240,8 +240,8 @@ static u32 ath9k_hw_def_dump_eeprom(struct ath_hw *ah, bool dump_base_hdr, PR_EEP("Cal Bin Build", (pBase->binBuildNumber >> 8) & 0xFF); PR_EEP("OpenLoop Power Ctrl", pBase->openLoopPwrCntl); - len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", - pBase->macAddr); + len += scnprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", + pBase->macAddr); out: if (len > size) diff --git a/drivers/net/wireless/ath/ath9k/gpio.c b/drivers/net/wireless/ath/ath9k/gpio.c index 4b412aa..c34f212 100644 --- a/drivers/net/wireless/ath/ath9k/gpio.c +++ b/drivers/net/wireless/ath/ath9k/gpio.c @@ -522,22 +522,22 @@ static int ath9k_dump_mci_btcoex(struct ath_softc *sc, u8 *buf, u32 size) ATH_DUMP_BTCOEX("Concurrent Tx", btcoex_hw->mci.concur_tx); ATH_DUMP_BTCOEX("Concurrent RSSI cnt", btcoex->rssi_count); - len += snprintf(buf + len, size - len, "BT Weights: "); + len += scnprintf(buf + len, size - len, "BT Weights: "); for (i = 0; i < AR9300_NUM_BT_WEIGHTS; i++) - len += snprintf(buf + len, size - len, "%08x ", - btcoex_hw->bt_weight[i]); - len += snprintf(buf + len, size - len, "\n"); - len += snprintf(buf + len, size - len, "WLAN Weights: "); + len += scnprintf(buf + len, size - len, "%08x ", + btcoex_hw->bt_weight[i]); + len += scnprintf(buf + len, size - len, "\n"); + len += scnprintf(buf + len, size - len, "WLAN Weights: "); for (i = 0; i < AR9300_NUM_BT_WEIGHTS; i++) - len += snprintf(buf + len, size - len, "%08x ", - btcoex_hw->wlan_weight[i]); - len += snprintf(buf + len, size - len, "\n"); - len += snprintf(buf + len, size - len, "Tx Priorities: "); + len += scnprintf(buf + len, size - len, "%08x ", + btcoex_hw->wlan_weight[i]); + len += scnprintf(buf + len, size - len, "\n"); + len += scnprintf(buf + len, size - len, "Tx Priorities: "); for (i = 0; i < ATH_BTCOEX_STOMP_MAX; i++) - len += snprintf(buf + len, size - len, "%08x ", + len += scnprintf(buf + len, size - len, "%08x ", btcoex_hw->tx_prio[i]); - len += snprintf(buf + len, size - len, "\n"); + len += scnprintf(buf + len, size - len, "\n"); return len; } diff --git a/drivers/net/wireless/ath/ath9k/htc_drv_debug.c b/drivers/net/wireless/ath/ath9k/htc_drv_debug.c index c1b45e2..fb071ee 100644 --- a/drivers/net/wireless/ath/ath9k/htc_drv_debug.c +++ b/drivers/net/wireless/ath/ath9k/htc_drv_debug.c @@ -37,29 +37,29 @@ static ssize_t read_file_tgt_int_stats(struct file *file, char __user *user_buf, ath9k_htc_ps_restore(priv); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "RX", - be32_to_cpu(cmd_rsp.rx)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "RX", + be32_to_cpu(cmd_rsp.rx)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "RXORN", - be32_to_cpu(cmd_rsp.rxorn)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "RXORN", + be32_to_cpu(cmd_rsp.rxorn)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "RXEOL", - be32_to_cpu(cmd_rsp.rxeol)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "RXEOL", + be32_to_cpu(cmd_rsp.rxeol)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "TXURN", - be32_to_cpu(cmd_rsp.txurn)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "TXURN", + be32_to_cpu(cmd_rsp.txurn)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "TXTO", - be32_to_cpu(cmd_rsp.txto)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "TXTO", + be32_to_cpu(cmd_rsp.txto)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "CST", - be32_to_cpu(cmd_rsp.cst)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "CST", + be32_to_cpu(cmd_rsp.cst)); if (len > sizeof(buf)) len = sizeof(buf); @@ -95,41 +95,41 @@ static ssize_t read_file_tgt_tx_stats(struct file *file, char __user *user_buf, ath9k_htc_ps_restore(priv); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "Xretries", - be32_to_cpu(cmd_rsp.xretries)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "Xretries", + be32_to_cpu(cmd_rsp.xretries)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "FifoErr", - be32_to_cpu(cmd_rsp.fifoerr)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "FifoErr", + be32_to_cpu(cmd_rsp.fifoerr)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "Filtered", - be32_to_cpu(cmd_rsp.filtered)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "Filtered", + be32_to_cpu(cmd_rsp.filtered)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "TimerExp", - be32_to_cpu(cmd_rsp.timer_exp)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "TimerExp", + be32_to_cpu(cmd_rsp.timer_exp)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "ShortRetries", - be32_to_cpu(cmd_rsp.shortretries)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "ShortRetries", + be32_to_cpu(cmd_rsp.shortretries)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "LongRetries", - be32_to_cpu(cmd_rsp.longretries)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "LongRetries", + be32_to_cpu(cmd_rsp.longretries)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "QueueNull", - be32_to_cpu(cmd_rsp.qnull)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "QueueNull", + be32_to_cpu(cmd_rsp.qnull)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "EncapFail", - be32_to_cpu(cmd_rsp.encap_fail)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "EncapFail", + be32_to_cpu(cmd_rsp.encap_fail)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "NoBuf", - be32_to_cpu(cmd_rsp.nobuf)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "NoBuf", + be32_to_cpu(cmd_rsp.nobuf)); if (len > sizeof(buf)) len = sizeof(buf); @@ -165,17 +165,17 @@ static ssize_t read_file_tgt_rx_stats(struct file *file, char __user *user_buf, ath9k_htc_ps_restore(priv); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "NoBuf", - be32_to_cpu(cmd_rsp.nobuf)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "NoBuf", + be32_to_cpu(cmd_rsp.nobuf)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "HostSend", - be32_to_cpu(cmd_rsp.host_send)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "HostSend", + be32_to_cpu(cmd_rsp.host_send)); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "HostDone", - be32_to_cpu(cmd_rsp.host_done)); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "HostDone", + be32_to_cpu(cmd_rsp.host_done)); if (len > sizeof(buf)) len = sizeof(buf); @@ -197,37 +197,37 @@ static ssize_t read_file_xmit(struct file *file, char __user *user_buf, char buf[512]; unsigned int len = 0; - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "Buffers queued", - priv->debug.tx_stats.buf_queued); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "Buffers completed", - priv->debug.tx_stats.buf_completed); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "SKBs queued", - priv->debug.tx_stats.skb_queued); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "SKBs success", - priv->debug.tx_stats.skb_success); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "SKBs failed", - priv->debug.tx_stats.skb_failed); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "CAB queued", - priv->debug.tx_stats.cab_queued); - - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "BE queued", - priv->debug.tx_stats.queue_stats[IEEE80211_AC_BE]); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "BK queued", - priv->debug.tx_stats.queue_stats[IEEE80211_AC_BK]); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "VI queued", - priv->debug.tx_stats.queue_stats[IEEE80211_AC_VI]); - len += snprintf(buf + len, sizeof(buf) - len, - "%20s : %10u\n", "VO queued", - priv->debug.tx_stats.queue_stats[IEEE80211_AC_VO]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "Buffers queued", + priv->debug.tx_stats.buf_queued); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "Buffers completed", + priv->debug.tx_stats.buf_completed); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "SKBs queued", + priv->debug.tx_stats.skb_queued); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "SKBs success", + priv->debug.tx_stats.skb_success); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "SKBs failed", + priv->debug.tx_stats.skb_failed); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "CAB queued", + priv->debug.tx_stats.cab_queued); + + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "BE queued", + priv->debug.tx_stats.queue_stats[IEEE80211_AC_BE]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "BK queued", + priv->debug.tx_stats.queue_stats[IEEE80211_AC_BK]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "VI queued", + priv->debug.tx_stats.queue_stats[IEEE80211_AC_VI]); + len += scnprintf(buf + len, sizeof(buf) - len, + "%20s : %10u\n", "VO queued", + priv->debug.tx_stats.queue_stats[IEEE80211_AC_VO]); if (len > sizeof(buf)) len = sizeof(buf); @@ -273,8 +273,8 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, size_t count, loff_t *ppos) { #define PHY_ERR(s, p) \ - len += snprintf(buf + len, size - len, "%20s : %10u\n", s, \ - priv->debug.rx_stats.err_phy_stats[p]); + len += scnprintf(buf + len, size - len, "%20s : %10u\n", s, \ + priv->debug.rx_stats.err_phy_stats[p]); struct ath9k_htc_priv *priv = file->private_data; char *buf; @@ -285,37 +285,37 @@ static ssize_t read_file_recv(struct file *file, char __user *user_buf, if (buf == NULL) return -ENOMEM; - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "SKBs allocated", - priv->debug.rx_stats.skb_allocated); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "SKBs completed", - priv->debug.rx_stats.skb_completed); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "SKBs Dropped", - priv->debug.rx_stats.skb_dropped); - - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "CRC ERR", - priv->debug.rx_stats.err_crc); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "DECRYPT CRC ERR", - priv->debug.rx_stats.err_decrypt_crc); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "MIC ERR", - priv->debug.rx_stats.err_mic); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "PRE-DELIM CRC ERR", - priv->debug.rx_stats.err_pre_delim); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "POST-DELIM CRC ERR", - priv->debug.rx_stats.err_post_delim); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "DECRYPT BUSY ERR", - priv->debug.rx_stats.err_decrypt_busy); - len += snprintf(buf + len, size - len, - "%20s : %10u\n", "TOTAL PHY ERR", - priv->debug.rx_stats.err_phy); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "SKBs allocated", + priv->debug.rx_stats.skb_allocated); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "SKBs completed", + priv->debug.rx_stats.skb_completed); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "SKBs Dropped", + priv->debug.rx_stats.skb_dropped); + + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "CRC ERR", + priv->debug.rx_stats.err_crc); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "DECRYPT CRC ERR", + priv->debug.rx_stats.err_decrypt_crc); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "MIC ERR", + priv->debug.rx_stats.err_mic); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "PRE-DELIM CRC ERR", + priv->debug.rx_stats.err_pre_delim); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "POST-DELIM CRC ERR", + priv->debug.rx_stats.err_post_delim); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "DECRYPT BUSY ERR", + priv->debug.rx_stats.err_decrypt_busy); + len += scnprintf(buf + len, size - len, + "%20s : %10u\n", "TOTAL PHY ERR", + priv->debug.rx_stats.err_phy); PHY_ERR("UNDERRUN", ATH9K_PHYERR_UNDERRUN); @@ -372,16 +372,16 @@ static ssize_t read_file_slot(struct file *file, char __user *user_buf, spin_lock_bh(&priv->tx.tx_lock); - len += snprintf(buf + len, sizeof(buf) - len, "TX slot bitmap : "); + len += scnprintf(buf + len, sizeof(buf) - len, "TX slot bitmap : "); len += bitmap_scnprintf(buf + len, sizeof(buf) - len, priv->tx.tx_slot, MAX_TX_BUF_NUM); - len += snprintf(buf + len, sizeof(buf) - len, "\n"); + len += scnprintf(buf + len, sizeof(buf) - len, "\n"); - len += snprintf(buf + len, sizeof(buf) - len, - "Used slots : %d\n", - bitmap_weight(priv->tx.tx_slot, MAX_TX_BUF_NUM)); + len += scnprintf(buf + len, sizeof(buf) - len, + "Used slots : %d\n", + bitmap_weight(priv->tx.tx_slot, MAX_TX_BUF_NUM)); spin_unlock_bh(&priv->tx.tx_lock); @@ -405,30 +405,30 @@ static ssize_t read_file_queue(struct file *file, char __user *user_buf, char buf[512]; unsigned int len = 0; - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Mgmt endpoint", skb_queue_len(&priv->tx.mgmt_ep_queue)); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Mgmt endpoint", skb_queue_len(&priv->tx.mgmt_ep_queue)); - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Cab endpoint", skb_queue_len(&priv->tx.cab_ep_queue)); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Cab endpoint", skb_queue_len(&priv->tx.cab_ep_queue)); - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Data BE endpoint", skb_queue_len(&priv->tx.data_be_queue)); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Data BE endpoint", skb_queue_len(&priv->tx.data_be_queue)); - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Data BK endpoint", skb_queue_len(&priv->tx.data_bk_queue)); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Data BK endpoint", skb_queue_len(&priv->tx.data_bk_queue)); - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Data VI endpoint", skb_queue_len(&priv->tx.data_vi_queue)); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Data VI endpoint", skb_queue_len(&priv->tx.data_vi_queue)); - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Data VO endpoint", skb_queue_len(&priv->tx.data_vo_queue)); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Data VO endpoint", skb_queue_len(&priv->tx.data_vo_queue)); - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Failed queue", skb_queue_len(&priv->tx.tx_failed)); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Failed queue", skb_queue_len(&priv->tx.tx_failed)); spin_lock_bh(&priv->tx.tx_lock); - len += snprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", - "Queued count", priv->tx.queued_cnt); + len += scnprintf(buf + len, sizeof(buf) - len, "%20s : %10u\n", + "Queued count", priv->tx.queued_cnt); spin_unlock_bh(&priv->tx.tx_lock); if (len > sizeof(buf)) @@ -507,70 +507,70 @@ static ssize_t read_file_base_eeprom(struct file *file, char __user *user_buf, if (buf == NULL) return -ENOMEM; - len += snprintf(buf + len, size - len, - "%20s : %10d\n", "Major Version", - pBase->version >> 12); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", "Minor Version", - pBase->version & 0xFFF); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", "Checksum", - pBase->checksum); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", "Length", - pBase->length); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", "RegDomain1", - pBase->regDmn[0]); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", "RegDomain2", - pBase->regDmn[1]); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "TX Mask", pBase->txMask); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "RX Mask", pBase->rxMask); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Allow 5GHz", - !!(pBase->opCapFlags & AR5416_OPFLAGS_11A)); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Allow 2GHz", - !!(pBase->opCapFlags & AR5416_OPFLAGS_11G)); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Disable 2GHz HT20", - !!(pBase->opCapFlags & AR5416_OPFLAGS_N_2G_HT20)); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Disable 2GHz HT40", - !!(pBase->opCapFlags & AR5416_OPFLAGS_N_2G_HT40)); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Disable 5Ghz HT20", - !!(pBase->opCapFlags & AR5416_OPFLAGS_N_5G_HT20)); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Disable 5Ghz HT40", - !!(pBase->opCapFlags & AR5416_OPFLAGS_N_5G_HT40)); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Big Endian", - !!(pBase->eepMisc & 0x01)); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Cal Bin Major Ver", - (pBase->binBuildNumber >> 24) & 0xFF); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Cal Bin Minor Ver", - (pBase->binBuildNumber >> 16) & 0xFF); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "Cal Bin Build", - (pBase->binBuildNumber >> 8) & 0xFF); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", "Major Version", + pBase->version >> 12); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", "Minor Version", + pBase->version & 0xFFF); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", "Checksum", + pBase->checksum); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", "Length", + pBase->length); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", "RegDomain1", + pBase->regDmn[0]); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", "RegDomain2", + pBase->regDmn[1]); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "TX Mask", pBase->txMask); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "RX Mask", pBase->rxMask); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Allow 5GHz", + !!(pBase->opCapFlags & AR5416_OPFLAGS_11A)); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Allow 2GHz", + !!(pBase->opCapFlags & AR5416_OPFLAGS_11G)); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Disable 2GHz HT20", + !!(pBase->opCapFlags & AR5416_OPFLAGS_N_2G_HT20)); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Disable 2GHz HT40", + !!(pBase->opCapFlags & AR5416_OPFLAGS_N_2G_HT40)); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Disable 5Ghz HT20", + !!(pBase->opCapFlags & AR5416_OPFLAGS_N_5G_HT20)); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Disable 5Ghz HT40", + !!(pBase->opCapFlags & AR5416_OPFLAGS_N_5G_HT40)); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Big Endian", + !!(pBase->eepMisc & 0x01)); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Cal Bin Major Ver", + (pBase->binBuildNumber >> 24) & 0xFF); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Cal Bin Minor Ver", + (pBase->binBuildNumber >> 16) & 0xFF); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "Cal Bin Build", + (pBase->binBuildNumber >> 8) & 0xFF); /* * UB91 specific data. @@ -579,10 +579,10 @@ static ssize_t read_file_base_eeprom(struct file *file, char __user *user_buf, struct base_eep_header_4k *pBase4k = &priv->ah->eeprom.map4k.baseEepHeader; - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "TX Gain type", - pBase4k->txGainType); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "TX Gain type", + pBase4k->txGainType); } /* @@ -592,19 +592,19 @@ static ssize_t read_file_base_eeprom(struct file *file, char __user *user_buf, struct base_eep_ar9287_header *pBase9287 = &priv->ah->eeprom.map9287.baseEepHeader; - len += snprintf(buf + len, size - len, - "%20s : %10ddB\n", - "Power Table Offset", - pBase9287->pwrTableOffset); + len += scnprintf(buf + len, size - len, + "%20s : %10ddB\n", + "Power Table Offset", + pBase9287->pwrTableOffset); - len += snprintf(buf + len, size - len, - "%20s : %10d\n", - "OpenLoop Power Ctrl", - pBase9287->openLoopPwrCntl); + len += scnprintf(buf + len, size - len, + "%20s : %10d\n", + "OpenLoop Power Ctrl", + pBase9287->openLoopPwrCntl); } - len += snprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", - pBase->macAddr); + len += scnprintf(buf + len, size - len, "%20s : %pM\n", "MacAddress", + pBase->macAddr); if (len > size) len = size; @@ -627,8 +627,8 @@ static ssize_t read_4k_modal_eeprom(struct file *file, { #define PR_EEP(_s, _val) \ do { \ - len += snprintf(buf + len, size - len, "%20s : %10d\n", \ - _s, (_val)); \ + len += scnprintf(buf + len, size - len, "%20s : %10d\n",\ + _s, (_val)); \ } while (0) struct ath9k_htc_priv *priv = file->private_data; @@ -708,12 +708,12 @@ static ssize_t read_def_modal_eeprom(struct file *file, do { \ if (pBase->opCapFlags & AR5416_OPFLAGS_11G) { \ pModal = &priv->ah->eeprom.def.modalHeader[1]; \ - len += snprintf(buf + len, size - len, "%20s : %8d%7s", \ - _s, (_val), "|"); \ + len += scnprintf(buf + len, size - len, "%20s : %8d%7s", \ + _s, (_val), "|"); \ } \ if (pBase->opCapFlags & AR5416_OPFLAGS_11A) { \ pModal = &priv->ah->eeprom.def.modalHeader[0]; \ - len += snprintf(buf + len, size - len, "%9d\n", \ + len += scnprintf(buf + len, size - len, "%9d\n",\ (_val)); \ } \ } while (0) @@ -729,10 +729,10 @@ static ssize_t read_def_modal_eeprom(struct file *file, if (buf == NULL) return -ENOMEM; - len += snprintf(buf + len, size - len, - "%31s %15s\n", "2G", "5G"); - len += snprintf(buf + len, size - len, - "%32s %16s\n", "====", "====\n"); + len += scnprintf(buf + len, size - len, + "%31s %15s\n", "2G", "5G"); + len += scnprintf(buf + len, size - len, + "%32s %16s\n", "====", "====\n"); PR_EEP("Chain0 Ant. Control", pModal->antCtrlChain[0]); PR_EEP("Chain1 Ant. Control", pModal->antCtrlChain[1]); @@ -814,8 +814,8 @@ static ssize_t read_9287_modal_eeprom(struct file *file, { #define PR_EEP(_s, _val) \ do { \ - len += snprintf(buf + len, size - len, "%20s : %10d\n", \ - _s, (_val)); \ + len += scnprintf(buf + len, size - len, "%20s : %10d\n",\ + _s, (_val)); \ } while (0) struct ath9k_htc_priv *priv = file->private_data; diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 260e0c6..525ac98 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -3252,19 +3252,19 @@ void ath9k_hw_name(struct ath_hw *ah, char *hw_name, size_t len) /* chipsets >= AR9280 are single-chip */ if (AR_SREV_9280_20_OR_LATER(ah)) { - used = snprintf(hw_name, len, - "Atheros AR%s Rev:%x", - ath9k_hw_mac_bb_name(ah->hw_version.macVersion), - ah->hw_version.macRev); + used = scnprintf(hw_name, len, + "Atheros AR%s Rev:%x", + ath9k_hw_mac_bb_name(ah->hw_version.macVersion), + ah->hw_version.macRev); } else { - used = snprintf(hw_name, len, - "Atheros AR%s MAC/BB Rev:%x AR%s RF Rev:%x", - ath9k_hw_mac_bb_name(ah->hw_version.macVersion), - ah->hw_version.macRev, - ath9k_hw_rf_name((ah->hw_version.analog5GhzRev & - AR_RADIO_SREV_MAJOR)), - ah->hw_version.phyRev); + used = scnprintf(hw_name, len, + "Atheros AR%s MAC/BB Rev:%x AR%s RF Rev:%x", + ath9k_hw_mac_bb_name(ah->hw_version.macVersion), + ah->hw_version.macRev, + ath9k_hw_rf_name((ah->hw_version.analog5GhzRev + & AR_RADIO_SREV_MAJOR)), + ah->hw_version.phyRev); } hw_name[used] = '\0'; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 88f67c3..5e564c7 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -98,8 +98,8 @@ #define PR_EEP(_s, _val) \ do { \ - len += snprintf(buf + len, size - len, "%20s : %10d\n", \ - _s, (_val)); \ + len += scnprintf(buf + len, size - len, "%20s : %10d\n",\ + _s, (_val)); \ } while (0) #define SM(_v, _f) (((_v) << _f##_S) & _f) diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index d3d7c51..d829bb6 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1387,31 +1387,31 @@ static ssize_t read_file_rcstat(struct file *file, char __user *user_buf, int used_mcs = 0, used_htmode = 0; if (WLAN_RC_PHY_HT(rc->rate_table->info[i].phy)) { - used_mcs = snprintf(mcs, 5, "%d", - rc->rate_table->info[i].ratecode); + used_mcs = scnprintf(mcs, 5, "%d", + rc->rate_table->info[i].ratecode); if (WLAN_RC_PHY_40(rc->rate_table->info[i].phy)) - used_htmode = snprintf(htmode, 5, "HT40"); + used_htmode = scnprintf(htmode, 5, "HT40"); else if (WLAN_RC_PHY_20(rc->rate_table->info[i].phy)) - used_htmode = snprintf(htmode, 5, "HT20"); + used_htmode = scnprintf(htmode, 5, "HT20"); else - used_htmode = snprintf(htmode, 5, "????"); + used_htmode = scnprintf(htmode, 5, "????"); } mcs[used_mcs] = '\0'; htmode[used_htmode] = '\0'; - len += snprintf(buf + len, max - len, - "%6s %6s %3u.%d: " - "%10u %10u %10u %10u\n", - htmode, - mcs, - ratekbps / 1000, - (ratekbps % 1000) / 100, - stats->success, - stats->retries, - stats->xretries, - stats->per); + len += scnprintf(buf + len, max - len, + "%6s %6s %3u.%d: " + "%10u %10u %10u %10u\n", + htmode, + mcs, + ratekbps / 1000, + (ratekbps % 1000) / 100, + stats->success, + stats->retries, + stats->xretries, + stats->per); } if (len > max) -- cgit v0.10.2 From b2a312046b6066cbf3bfb9154c7390eb0154fe03 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Mon, 9 Sep 2013 14:26:51 +0900 Subject: mwifiex: Remove casting the return value which is a void pointer Casting the return value which is a void pointer is redundant. The conversion from void pointer to any other pointer type is guaranteed by the C programming language. Signed-off-by: Jingoo Han Acked-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 52da8ee..33fa943 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -93,7 +93,7 @@ static int mwifiex_pcie_suspend(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); if (pdev) { - card = (struct pcie_service_card *) pci_get_drvdata(pdev); + card = pci_get_drvdata(pdev); if (!card || !card->adapter) { pr_err("Card or adapter structure is not valid\n"); return 0; @@ -128,7 +128,7 @@ static int mwifiex_pcie_resume(struct device *dev) struct pci_dev *pdev = to_pci_dev(dev); if (pdev) { - card = (struct pcie_service_card *) pci_get_drvdata(pdev); + card = pci_get_drvdata(pdev); if (!card || !card->adapter) { pr_err("Card or adapter structure is not valid\n"); return 0; @@ -2037,7 +2037,7 @@ static irqreturn_t mwifiex_pcie_interrupt(int irq, void *context) goto exit; } - card = (struct pcie_service_card *) pci_get_drvdata(pdev); + card = pci_get_drvdata(pdev); if (!card || !card->adapter) { pr_debug("info: %s: card=%p adapter=%p\n", __func__, card, card ? card->adapter : NULL); -- cgit v0.10.2 From 61edc7fad65c80e9f8ddf522339c1d2d91c6328d Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Mon, 9 Sep 2013 12:37:38 +0200 Subject: rt2800: comment enable radio initialization sequence Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 88ce656..470a7aa 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -6653,17 +6653,20 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) u16 word; /* - * Initialize all registers. + * Initialize MAC registers. */ if (unlikely(rt2800_wait_wpdma_ready(rt2x00dev) || rt2800_init_registers(rt2x00dev))) return -EIO; + /* + * Wait BBP/RF to wake up. + */ if (unlikely(rt2800_wait_bbp_rf_ready(rt2x00dev))) return -EIO; /* - * Send signal to firmware during boot time. + * Send signal during boot time to initialize firmware. */ rt2800_register_write(rt2x00dev, H2M_BBP_AGENT, 0); rt2800_register_write(rt2x00dev, H2M_MAILBOX_CSR, 0); @@ -6672,9 +6675,15 @@ int rt2800_enable_radio(struct rt2x00_dev *rt2x00dev) rt2800_mcu_request(rt2x00dev, MCU_BOOT_SIGNAL, 0, 0, 0); msleep(1); + /* + * Make sure BBP is up and running. + */ if (unlikely(rt2800_wait_bbp_ready(rt2x00dev))) return -EIO; + /* + * Initialize BBP/RF registers. + */ rt2800_init_bbp(rt2x00dev); rt2800_init_rfcsr(rt2x00dev); -- cgit v0.10.2 From 38e05a0e5267ff3a433f3b83ec1c18a93722e9d5 Mon Sep 17 00:00:00 2001 From: Albert Pool Date: Mon, 9 Sep 2013 20:36:30 +0200 Subject: ar5523: Add USB ID of D-Link WUA-2340 rev A1 Signed-off-by: Albert Pool Reported-by: Michael Landrum Acked-by: Pontus Fuchs Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ar5523/ar5523.c b/drivers/net/wireless/ath/ar5523/ar5523.c index 17d7fec..280fc3d 100644 --- a/drivers/net/wireless/ath/ar5523/ar5523.c +++ b/drivers/net/wireless/ath/ar5523/ar5523.c @@ -1762,6 +1762,7 @@ static struct usb_device_id ar5523_id_table[] = { AR5523_DEVICE_UX(0x2001, 0x3a00), /* Dlink / DWLAG132 */ AR5523_DEVICE_UG(0x2001, 0x3a02), /* Dlink / DWLG132 */ AR5523_DEVICE_UX(0x2001, 0x3a04), /* Dlink / DWLAG122 */ + AR5523_DEVICE_UG(0x07d1, 0x3a07), /* D-Link / WUA-2340 rev A1 */ AR5523_DEVICE_UG(0x1690, 0x0712), /* Gigaset / AR5523 */ AR5523_DEVICE_UG(0x1690, 0x0710), /* Gigaset / SMCWUSBTG */ AR5523_DEVICE_UG(0x129b, 0x160c), /* Gigaset / USB stick 108 -- cgit v0.10.2 From 5bb4101bc93a23dfcac508994378e975702e1abd Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Tue, 10 Sep 2013 11:50:36 +0530 Subject: net: ath9k: Use NULL instead of false The function returns a pointer. Hence return NULL instead of false. Signed-off-by: Sachin Kamat Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/dfs_pri_detector.c b/drivers/net/wireless/ath/ath9k/dfs_pri_detector.c index 5ba4b6f..c718fc3 100644 --- a/drivers/net/wireless/ath/ath9k/dfs_pri_detector.c +++ b/drivers/net/wireless/ath/ath9k/dfs_pri_detector.c @@ -392,7 +392,7 @@ static struct pri_sequence *pri_detector_add_pulse(struct pri_detector *de, if (!pseq_handler_create_sequences(de, ts, max_updated_seq)) { pri_detector_reset(de, ts); - return false; + return NULL; } ps = pseq_handler_check_detection(de); -- cgit v0.10.2 From b920e375be517524423826a58854b2d76017a2e3 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:51:47 +0900 Subject: wireless: ath5k: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath5k/ahb.c b/drivers/net/wireless/ath/ath5k/ahb.c index e9bc9e6..79bffe1 100644 --- a/drivers/net/wireless/ath/ath5k/ahb.c +++ b/drivers/net/wireless/ath/ath5k/ahb.c @@ -37,12 +37,9 @@ ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) { struct ath5k_hw *ah = common->priv; struct platform_device *pdev = to_platform_device(ah->dev); - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); u16 *eeprom, *eeprom_end; - - - bcfg = pdev->dev.platform_data; eeprom = (u16 *) bcfg->radio; eeprom_end = ((void *) bcfg->config) + BOARD_CONFIG_BUFSZ; @@ -57,7 +54,7 @@ ath5k_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) int ath5k_hw_read_srev(struct ath5k_hw *ah) { struct platform_device *pdev = to_platform_device(ah->dev); - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); ah->ah_mac_srev = bcfg->devid; return 0; } @@ -65,7 +62,7 @@ int ath5k_hw_read_srev(struct ath5k_hw *ah) static int ath5k_ahb_eeprom_read_mac(struct ath5k_hw *ah, u8 *mac) { struct platform_device *pdev = to_platform_device(ah->dev); - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); u8 *cfg_mac; if (to_platform_device(ah->dev)->id == 0) @@ -87,7 +84,7 @@ static const struct ath_bus_ops ath_ahb_bus_ops = { /*Initialization*/ static int ath_ahb_probe(struct platform_device *pdev) { - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); struct ath5k_hw *ah; struct ieee80211_hw *hw; struct resource *res; @@ -96,7 +93,7 @@ static int ath_ahb_probe(struct platform_device *pdev) int ret = 0; u32 reg; - if (!pdev->dev.platform_data) { + if (!dev_get_platdata(&pdev->dev)) { dev_err(&pdev->dev, "no platform data specified\n"); ret = -EINVAL; goto err_out; @@ -193,7 +190,7 @@ static int ath_ahb_probe(struct platform_device *pdev) static int ath_ahb_remove(struct platform_device *pdev) { - struct ar231x_board_config *bcfg = pdev->dev.platform_data; + struct ar231x_board_config *bcfg = dev_get_platdata(&pdev->dev); struct ieee80211_hw *hw = platform_get_drvdata(pdev); struct ath5k_hw *ah; u32 reg; -- cgit v0.10.2 From 8f616c6d312e2bd8971a068c1bedb47658c53363 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:53:02 +0900 Subject: wireless: ath9k: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ahb.c b/drivers/net/wireless/ath/ath9k/ahb.c index 072e4b5..2dff276 100644 --- a/drivers/net/wireless/ath/ath9k/ahb.c +++ b/drivers/net/wireless/ath/ath9k/ahb.c @@ -54,7 +54,7 @@ static bool ath_ahb_eeprom_read(struct ath_common *common, u32 off, u16 *data) struct platform_device *pdev = to_platform_device(sc->dev); struct ath9k_platform_data *pdata; - pdata = (struct ath9k_platform_data *) pdev->dev.platform_data; + pdata = dev_get_platdata(&pdev->dev); if (off >= (ARRAY_SIZE(pdata->eeprom_data))) { ath_err(common, "%s: flash read failed, offset %08x is out of range\n", @@ -84,7 +84,7 @@ static int ath_ahb_probe(struct platform_device *pdev) struct ath_hw *ah; char hw_name[64]; - if (!pdev->dev.platform_data) { + if (!dev_get_platdata(&pdev->dev)) { dev_err(&pdev->dev, "no platform data specified\n"); return -EINVAL; } -- cgit v0.10.2 From f41167026d2cfaa238235d17344aabf9d9aee6fe Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:54:47 +0900 Subject: wireless: brcmfmac: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 64f4a2b..592ae13 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -468,7 +468,7 @@ static int brcmf_sdio_pd_probe(struct platform_device *pdev) brcmf_dbg(SDIO, "Enter\n"); - brcmfmac_sdio_pdata = pdev->dev.platform_data; + brcmfmac_sdio_pdata = dev_get_platdata(&pdev->dev); if (brcmfmac_sdio_pdata->power_on) brcmfmac_sdio_pdata->power_on(); -- cgit v0.10.2 From 3ec8a8d88f762c78caa2d364c111089db81717be Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:55:41 +0900 Subject: wireless: cw1200: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/cw1200/cw1200_spi.c b/drivers/net/wireless/cw1200/cw1200_spi.c index f5e6b48..e310752 100644 --- a/drivers/net/wireless/cw1200/cw1200_spi.c +++ b/drivers/net/wireless/cw1200/cw1200_spi.c @@ -375,7 +375,7 @@ static struct hwbus_ops cw1200_spi_hwbus_ops = { static int cw1200_spi_probe(struct spi_device *func) { const struct cw1200_platform_data_spi *plat_data = - func->dev.platform_data; + dev_get_platdata(&func->dev); struct hwbus_priv *self; int status; @@ -453,7 +453,7 @@ static int cw1200_spi_disconnect(struct spi_device *func) } kfree(self); } - cw1200_spi_off(func->dev.platform_data); + cw1200_spi_off(dev_get_platdata(&func->dev)); return 0; } -- cgit v0.10.2 From 7204c978278797356e5142fc5d749f360d787e01 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:56:27 +0900 Subject: wireless: libertas: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/if_spi.c b/drivers/net/wireless/libertas/if_spi.c index 4bb6574..5d39ec8 100644 --- a/drivers/net/wireless/libertas/if_spi.c +++ b/drivers/net/wireless/libertas/if_spi.c @@ -1128,7 +1128,7 @@ static int if_spi_probe(struct spi_device *spi) { struct if_spi_card *card; struct lbs_private *priv = NULL; - struct libertas_spi_platform_data *pdata = spi->dev.platform_data; + struct libertas_spi_platform_data *pdata = dev_get_platdata(&spi->dev); int err = 0; lbs_deb_enter(LBS_DEB_SPI); -- cgit v0.10.2 From 5f4fe16bac118ed9e88fdf14380e1c1345376a7d Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:57:05 +0900 Subject: wireless: wl1251: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ti/wl1251/spi.c b/drivers/net/wireless/ti/wl1251/spi.c index c7dc6fe..1342f81 100644 --- a/drivers/net/wireless/ti/wl1251/spi.c +++ b/drivers/net/wireless/ti/wl1251/spi.c @@ -243,7 +243,7 @@ static int wl1251_spi_probe(struct spi_device *spi) struct wl1251 *wl; int ret; - pdata = spi->dev.platform_data; + pdata = dev_get_platdata(&spi->dev); if (!pdata) { wl1251_error("no platform data"); return -ENODEV; -- cgit v0.10.2 From 90650625dba2852bcf91d5edf472a79e9e333ab7 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:57:57 +0900 Subject: wireless: wlcore: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 38995f9..c30e1f1 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5900,7 +5900,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) { struct wl1271 *wl = context; struct platform_device *pdev = wl->pdev; - struct wlcore_platdev_data *pdev_data = pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = dev_get_platdata(&pdev->dev); struct wl12xx_platform_data *pdata = pdev_data->pdata; unsigned long irqflags; int ret; diff --git a/drivers/net/wireless/ti/wlcore/spi.c b/drivers/net/wireless/ti/wlcore/spi.c index 1b0cd98..b2c018d 100644 --- a/drivers/net/wireless/ti/wlcore/spi.c +++ b/drivers/net/wireless/ti/wlcore/spi.c @@ -335,7 +335,7 @@ static int wl1271_probe(struct spi_device *spi) if (!pdev_data) goto out; - pdev_data->pdata = spi->dev.platform_data; + pdev_data->pdata = dev_get_platdata(&spi->dev); if (!pdev_data->pdata) { dev_err(&spi->dev, "no platform data\n"); ret = -ENODEV; -- cgit v0.10.2 From c4978e251f3a5cd0576bc411942f08c9a11f62d8 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 17:58:32 +0900 Subject: wireless: wl12xx: use dev_get_platdata() Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ti/wl12xx/main.c b/drivers/net/wireless/ti/wl12xx/main.c index 1c627da..591526b 100644 --- a/drivers/net/wireless/ti/wl12xx/main.c +++ b/drivers/net/wireless/ti/wl12xx/main.c @@ -1704,7 +1704,7 @@ static struct ieee80211_sta_ht_cap wl12xx_ht_cap = { static int wl12xx_setup(struct wl1271 *wl) { struct wl12xx_priv *priv = wl->priv; - struct wlcore_platdev_data *pdev_data = wl->pdev->dev.platform_data; + struct wlcore_platdev_data *pdev_data = dev_get_platdata(&wl->pdev->dev); struct wl12xx_platform_data *pdata = pdev_data->pdata; wl->rtable = wl12xx_rtable; -- cgit v0.10.2 From 8d450935ae7f9ceaaa2c6fb21856c286aa9ccf8e Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:18:38 +0900 Subject: wireless: rtlwifi: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 703f839..2b6d3e0 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -2009,7 +2009,6 @@ fail2: fail1: if (hw) ieee80211_free_hw(hw); - pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); return err; @@ -2064,8 +2063,6 @@ void rtl_pci_disconnect(struct pci_dev *pdev) rtl_pci_disable_aspm(hw); - pci_set_drvdata(pdev, NULL); - ieee80211_free_hw(hw); } EXPORT_SYMBOL(rtl_pci_disconnect); -- cgit v0.10.2 From c1faf2cae280400e5368431da9c87ecfca8fbc62 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:19:41 +0900 Subject: wireless: iwlegacy: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 9581d07..dea3b50 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -3811,7 +3811,6 @@ out_iounmap: out_pci_release_regions: pci_release_regions(pdev); out_pci_disable_device: - pci_set_drvdata(pdev, NULL); pci_disable_device(pdev); out_ieee80211_free_hw: ieee80211_free_hw(il->hw); @@ -3888,7 +3887,6 @@ il3945_pci_remove(struct pci_dev *pdev) iounmap(il->hw_base); pci_release_regions(pdev); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); il_free_channel_map(il); il_free_geos(il); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 5ab50a5..3982ab7 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -6706,7 +6706,6 @@ out_free_eeprom: out_iounmap: iounmap(il->hw_base); out_pci_release_regions: - pci_set_drvdata(pdev, NULL); pci_release_regions(pdev); out_pci_disable_device: pci_disable_device(pdev); @@ -6787,7 +6786,6 @@ il4965_pci_remove(struct pci_dev *pdev) iounmap(il->hw_base); pci_release_regions(pdev); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); il4965_uninit_drv(il); -- cgit v0.10.2 From 11caec6952599c95e43e34b87e75a6add5be0067 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:22:10 +0900 Subject: wireless: adm8211: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/adm8211.c b/drivers/net/wireless/adm8211.c index f9a24e5..cfce83e 100644 --- a/drivers/net/wireless/adm8211.c +++ b/drivers/net/wireless/adm8211.c @@ -1924,7 +1924,6 @@ static int adm8211_probe(struct pci_dev *pdev, pci_iounmap(pdev, priv->map); err_free_dev: - pci_set_drvdata(pdev, NULL); ieee80211_free_hw(dev); err_free_reg: -- cgit v0.10.2 From 81d503660dc959af641bb3b54a9162586297dc39 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:23:50 +0900 Subject: wireless: airo: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 7fe1964..edf4b57 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -5570,7 +5570,6 @@ static void airo_pci_remove(struct pci_dev *pdev) airo_print_info(dev->name, "Unregistering..."); stop_airo_card(dev, 1); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); } static int airo_pci_suspend(struct pci_dev *pdev, pm_message_t state) -- cgit v0.10.2 From 1348088d6ff39c3b2c560da339eaf6284df95664 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:25:11 +0900 Subject: wireless: ath10k: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c index 622901d..56501f4 100644 --- a/drivers/net/wireless/ath/ath10k/pci.c +++ b/drivers/net/wireless/ath/ath10k/pci.c @@ -2520,7 +2520,6 @@ err_region: err_device: pci_disable_device(pdev); err_ar: - pci_set_drvdata(pdev, NULL); ath10k_core_destroy(ar); err_ar_pci: /* call HIF PCI free here */ @@ -2548,7 +2547,6 @@ static void ath10k_pci_remove(struct pci_dev *pdev) ath10k_core_unregister(ar); - pci_set_drvdata(pdev, NULL); pci_iounmap(pdev, ar_pci->mem); pci_release_region(pdev, BAR_NUM); pci_clear_master(pdev); -- cgit v0.10.2 From 3f06534183a0dd68a40fb286da0025d95a586eb0 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:26:13 +0900 Subject: wireless: wil6210: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Acked-by: Vladimir Kondratiev Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index eb1dc7a..eeceab3 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -197,7 +197,6 @@ static void wil_pcie_remove(struct pci_dev *pdev) pci_iounmap(pdev, wil->csr); pci_release_region(pdev, 0); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); } static DEFINE_PCI_DEVICE_TABLE(wil6210_pcie_ids) = { -- cgit v0.10.2 From 0acfd4b06e4b4550c94e24a582853df16d4eb5a5 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:27:09 +0900 Subject: wireless: ipw2x00: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 6b823a1..f394af7 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11885,7 +11885,6 @@ static int ipw_pci_probe(struct pci_dev *pdev, pci_release_regions(pdev); out_pci_disable_device: pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); out_free_libipw: free_libipw(priv->net_dev, 0); out: @@ -11966,7 +11965,6 @@ static void ipw_pci_remove(struct pci_dev *pdev) iounmap(priv->hw_base); pci_release_regions(pdev); pci_disable_device(pdev); - pci_set_drvdata(pdev, NULL); /* wiphy_unregister needs to be here, before free_libipw */ wiphy_unregister(priv->ieee->wdev.wiphy); kfree(priv->ieee->a_band.channels); -- cgit v0.10.2 From e53c61a055988739e0f7a2cbf14a5e48427778a3 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:27:49 +0900 Subject: wireless: mwl8k: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index a3707fd..b953ad6 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -6093,7 +6093,6 @@ err_iounmap: if (priv->sram != NULL) pci_iounmap(pdev, priv->sram); - pci_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); err_free_reg: @@ -6147,7 +6146,6 @@ static void mwl8k_remove(struct pci_dev *pdev) unmap: pci_iounmap(pdev, priv->regs); pci_iounmap(pdev, priv->sram); - pci_set_drvdata(pdev, NULL); ieee80211_free_hw(hw); pci_release_regions(pdev); pci_disable_device(pdev); -- cgit v0.10.2 From 68351b58036b39fc91d52682a2806aa8a66e53dd Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:29:19 +0900 Subject: wireless: orinoco: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/orinoco/orinoco_nortel.c b/drivers/net/wireless/orinoco/orinoco_nortel.c index d73fdf6..ffb2469 100644 --- a/drivers/net/wireless/orinoco/orinoco_nortel.c +++ b/drivers/net/wireless/orinoco/orinoco_nortel.c @@ -234,7 +234,6 @@ static int orinoco_nortel_init_one(struct pci_dev *pdev, free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); fail_alloc: @@ -265,7 +264,6 @@ static void orinoco_nortel_remove_one(struct pci_dev *pdev) orinoco_if_del(priv); free_irq(pdev->irq, priv); - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_iounmap(pdev, card->attr_io); diff --git a/drivers/net/wireless/orinoco/orinoco_pci.c b/drivers/net/wireless/orinoco/orinoco_pci.c index 677bf14..5ae1191 100644 --- a/drivers/net/wireless/orinoco/orinoco_pci.c +++ b/drivers/net/wireless/orinoco/orinoco_pci.c @@ -184,7 +184,6 @@ static int orinoco_pci_init_one(struct pci_dev *pdev, free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); fail_alloc: @@ -205,7 +204,6 @@ static void orinoco_pci_remove_one(struct pci_dev *pdev) orinoco_if_del(priv); free_irq(pdev->irq, priv); - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_release_regions(pdev); diff --git a/drivers/net/wireless/orinoco/orinoco_plx.c b/drivers/net/wireless/orinoco/orinoco_plx.c index 2559dbd..bbd36d1 100644 --- a/drivers/net/wireless/orinoco/orinoco_plx.c +++ b/drivers/net/wireless/orinoco/orinoco_plx.c @@ -273,7 +273,6 @@ static int orinoco_plx_init_one(struct pci_dev *pdev, free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); fail_alloc: @@ -301,7 +300,6 @@ static void orinoco_plx_remove_one(struct pci_dev *pdev) orinoco_if_del(priv); free_irq(pdev->irq, priv); - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_iounmap(pdev, card->attr_io); diff --git a/drivers/net/wireless/orinoco/orinoco_tmd.c b/drivers/net/wireless/orinoco/orinoco_tmd.c index 42afeee..04b08de 100644 --- a/drivers/net/wireless/orinoco/orinoco_tmd.c +++ b/drivers/net/wireless/orinoco/orinoco_tmd.c @@ -170,7 +170,6 @@ static int orinoco_tmd_init_one(struct pci_dev *pdev, free_irq(pdev->irq, priv); fail_irq: - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); fail_alloc: @@ -195,7 +194,6 @@ static void orinoco_tmd_remove_one(struct pci_dev *pdev) orinoco_if_del(priv); free_irq(pdev->irq, priv); - pci_set_drvdata(pdev, NULL); free_orinocodev(priv); pci_iounmap(pdev, priv->hw.iobase); pci_iounmap(pdev, card->bridge_io); -- cgit v0.10.2 From 717a23a1425a5a84b4e90bcdf28f070506b4ad62 Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:30:49 +0900 Subject: wireless: p54pci: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54pci.c b/drivers/net/wireless/p54/p54pci.c index 57e3af8..f9a07b0 100644 --- a/drivers/net/wireless/p54/p54pci.c +++ b/drivers/net/wireless/p54/p54pci.c @@ -631,7 +631,6 @@ static int p54p_probe(struct pci_dev *pdev, iounmap(priv->map); err_free_dev: - pci_set_drvdata(pdev, NULL); p54_free_common(dev); err_free_reg: -- cgit v0.10.2 From 8aee318f8d94761546f06248ad87610e4104655a Mon Sep 17 00:00:00 2001 From: Jingoo Han Date: Tue, 10 Sep 2013 20:32:19 +0900 Subject: wireless: rtl818x: remove unnecessary pci_set_drvdata() The driver core clears the driver data to NULL after device_release or on probe failure. Thus, it is not needed to manually clear the device driver data to NULL. Signed-off-by: Jingoo Han Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl818x/rtl8180/dev.c b/drivers/net/wireless/rtl818x/rtl8180/dev.c index fc207b2..a91506b 100644 --- a/drivers/net/wireless/rtl818x/rtl8180/dev.c +++ b/drivers/net/wireless/rtl818x/rtl8180/dev.c @@ -1122,7 +1122,6 @@ static int rtl8180_probe(struct pci_dev *pdev, iounmap(priv->map); err_free_dev: - pci_set_drvdata(pdev, NULL); ieee80211_free_hw(dev); err_free_reg: -- cgit v0.10.2 From c6945455682c92b9b61f2cf354771e00da11492d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 11 Sep 2013 11:40:57 +0530 Subject: ath9k: Fix calibration for AR9462 TX IQ calibration is disabled by default for AR9462, this is done using the initvals (reg 0xa644). But, to compensate for this, the AR_PHY_RX_DELAY register should be set to the max allowed value when performing calibration. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 6988e1d..6001bc0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1019,6 +1019,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, bool is_reusable = true, status = true; bool run_rtt_cal = false, run_agc_cal, sep_iq_cal = false; bool rtt = !!(ah->caps.hw_caps & ATH9K_HW_CAP_RTT); + u32 rx_delay = 0; u32 agc_ctrl = 0, agc_supp_cals = AR_PHY_AGC_CONTROL_OFFSET_CAL | AR_PHY_AGC_CONTROL_FLTR_CAL | AR_PHY_AGC_CONTROL_PKDET_CAL; @@ -1099,6 +1100,15 @@ skip_tx_iqcal: REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); } + if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) { + rx_delay = REG_READ(ah, AR_PHY_RX_DELAY); + /* Disable BB_active */ + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_DIS); + udelay(5); + REG_WRITE(ah, AR_PHY_RX_DELAY, AR_PHY_RX_DELAY_DELAY); + REG_WRITE(ah, AR_PHY_ACTIVE, AR_PHY_ACTIVE_EN); + } + if (run_agc_cal || !(ah->ah_flags & AH_FASTCC)) { /* Calibrate the AGC */ REG_WRITE(ah, AR_PHY_AGC_CONTROL, @@ -1113,6 +1123,11 @@ skip_tx_iqcal: ar9003_hw_do_manual_peak_cal(ah, chan); } + if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) { + REG_WRITE(ah, AR_PHY_RX_DELAY, rx_delay); + udelay(5); + } + if (ath9k_hw_mci_is_enabled(ah) && IS_CHAN_2GHZ(chan) && run_agc_cal) ar9003_mci_init_cal_done(ah); -- cgit v0.10.2 From 9ef48932344a8ea9d6d1628d92afc2c5d6958336 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 11 Sep 2013 11:40:58 +0530 Subject: ath9k: Fix issue with parsing malformed CFP IE All QCA chips have the ability to parse the CF Parameter Set IE in beacons. If the IE is malformed in the beacons from some APs [1], the HW locks up. In AP mode, a beacon stuck would happen and in client mode, a disconnection usually is the result. To fix this issue, set the AR_PCU_MISC_MODE2_CFP_IGNORE to ignore the CFP IE in beacons - this is applicable for all chips. For AP mode, if this issue happens, the NAV is also corrupted and has to be reset - this will be done in a subsequent patch. [1] : http://msujith.org/ath9k/cfp/Malformed-CF-Param.png Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index 0865647..9e4e2a6 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -626,6 +626,8 @@ static void ar5008_hw_override_ini(struct ath_hw *ah, if (AR_SREV_9287_11_OR_LATER(ah)) val = val & (~AR_PCU_MISC_MODE2_HWWAR2); + val |= AR_PCU_MISC_MODE2_CFP_IGNORE; + REG_WRITE(ah, AR_PCU_MISC_MODE2, val); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index b8a279e..ec37213 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -627,8 +627,10 @@ static void ar9003_hw_override_ini(struct ath_hw *ah) * MAC addr only will fail. */ val = REG_READ(ah, AR_PCU_MISC_MODE2) & (~AR_ADHOC_MCAST_KEYID_ENABLE); - REG_WRITE(ah, AR_PCU_MISC_MODE2, - val | AR_AGG_WEP_ENABLE_FIX | AR_AGG_WEP_ENABLE); + val |= AR_AGG_WEP_ENABLE_FIX | + AR_AGG_WEP_ENABLE | + AR_PCU_MISC_MODE2_CFP_IGNORE; + REG_WRITE(ah, AR_PCU_MISC_MODE2, val); REG_SET_BIT(ah, AR_PHY_CCK_DETECT, AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); -- cgit v0.10.2 From 1e516ca7c9ceeeec4ed87f549a14bc3b73427f83 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 11 Sep 2013 21:30:27 +0530 Subject: ath9k: Handle abnormal NAV in AP mode Beacon transmission would get stuck if the NAV is an invalid value for some reason. Check and correct the NAV value in the HW when this happens. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/beacon.c b/drivers/net/wireless/ath/ath9k/beacon.c index b5c16b3a..17be353 100644 --- a/drivers/net/wireless/ath/ath9k/beacon.c +++ b/drivers/net/wireless/ath/ath9k/beacon.c @@ -334,6 +334,8 @@ void ath9k_beacon_tasklet(unsigned long data) if (ath9k_hw_numtxpending(ah, sc->beacon.beaconq) != 0) { sc->beacon.bmisscnt++; + ath9k_hw_check_nav(ah); + if (!ath9k_hw_check_alive(ah)) ieee80211_queue_work(sc->hw, &sc->hw_check_work); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index 525ac98..d3206ab 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1656,6 +1656,19 @@ hang_check_iter: return true; } +void ath9k_hw_check_nav(struct ath_hw *ah) +{ + struct ath_common *common = ath9k_hw_common(ah); + u32 val; + + val = REG_READ(ah, AR_NAV); + if (val != 0xdeadbeef && val > 0x7fff) { + ath_dbg(common, BSTUCK, "Abnormal NAV: 0x%x\n", val); + REG_WRITE(ah, AR_NAV, 0); + } +} +EXPORT_SYMBOL(ath9k_hw_check_nav); + bool ath9k_hw_check_alive(struct ath_hw *ah) { int count = 50; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 5e564c7..5376011 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -1031,6 +1031,7 @@ void ath9k_hw_set11nmac2040(struct ath_hw *ah); void ath9k_hw_beaconinit(struct ath_hw *ah, u32 next_beacon, u32 beacon_period); void ath9k_hw_set_sta_beacon_timers(struct ath_hw *ah, const struct ath9k_beacon_state *bs); +void ath9k_hw_check_nav(struct ath_hw *ah); bool ath9k_hw_check_alive(struct ath_hw *ah); bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode); -- cgit v0.10.2 From 4b9b42bfe08fa369c4f51f00d5f349b32242cd8c Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 11 Sep 2013 16:36:31 +0530 Subject: ath9k: Use bitops for calibration flags Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 9f58974..32376ad 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -671,7 +671,7 @@ static bool ar9002_hw_calibrate(struct ath_hw *ah, nfcal = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF); if (ah->caldata) - nfcal_pending = ah->caldata->nfcal_pending; + nfcal_pending = test_bit(NFCAL_PENDING, &ah->caldata->cal_flags); if (currCal && !nfcal && (currCal->calState == CAL_RUNNING || @@ -861,7 +861,7 @@ static bool ar9002_hw_init_cal(struct ath_hw *ah, struct ath9k_channel *chan) ar9002_hw_pa_cal(ah, true); if (ah->caldata) - ah->caldata->nfcal_pending = true; + set_bit(NFCAL_PENDING, &ah->caldata->cal_flags); ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL; diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 6001bc0..687173c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -727,8 +727,12 @@ static void ar9003_hw_tx_iqcal_load_avg_2_passes(struct ath_hw *ah, REG_RMW_FIELD(ah, AR_PHY_RX_IQCAL_CORR_B0, AR_PHY_RX_IQCAL_CORR_B0_LOOPBACK_IQCORR_EN, 0x1); - if (caldata) - caldata->done_txiqcal_once = is_reusable; + if (caldata) { + if (is_reusable) + set_bit(TXIQCAL_DONE, &caldata->cal_flags); + else + clear_bit(TXIQCAL_DONE, &caldata->cal_flags); + } return; } @@ -990,7 +994,7 @@ static void ar9003_hw_cl_cal_post_proc(struct ath_hw *ah, bool is_reusable) txclcal_done = !!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_CLC_SUCCESS); - if (caldata->done_txclcal_once) { + if (test_bit(TXCLCAL_DONE, &caldata->cal_flags)) { for (i = 0; i < AR9300_MAX_CHAINS; i++) { if (!(ah->txchainmask & (1 << i))) continue; @@ -1006,7 +1010,7 @@ static void ar9003_hw_cl_cal_post_proc(struct ath_hw *ah, bool is_reusable) caldata->tx_clcal[i][j] = REG_READ(ah, CL_TAB_ENTRY(cl_idx[i])); } - caldata->done_txclcal_once = true; + set_bit(TXCLCAL_DONE, &caldata->cal_flags); } } @@ -1053,7 +1057,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, } if (ah->enabled_cals & TX_CL_CAL) { - if (caldata && caldata->done_txclcal_once) + if (caldata && test_bit(TXCLCAL_DONE, &caldata->cal_flags)) REG_CLR_BIT(ah, AR_PHY_CL_CAL_CTL, AR_PHY_CL_CAL_ENABLE); else { @@ -1077,14 +1081,14 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, * AGC calibration */ if (ah->enabled_cals & TX_IQ_ON_AGC_CAL) { - if (caldata && !caldata->done_txiqcal_once) + if (caldata && !test_bit(TXIQCAL_DONE, &caldata->cal_flags)) REG_SET_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0, AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL); else REG_CLR_BIT(ah, AR_PHY_TX_IQCAL_CONTROL_0, AR_PHY_TX_IQCAL_CONTROL_0_ENABLE_TXIQ_CAL); txiqcal_done = run_agc_cal = true; - } else if (caldata && !caldata->done_txiqcal_once) { + } else if (caldata && !test_bit(TXIQCAL_DONE, &caldata->cal_flags)) { run_agc_cal = true; sep_iq_cal = true; } @@ -1148,7 +1152,7 @@ skip_tx_iqcal: if (txiqcal_done) ar9003_hw_tx_iq_cal_post_proc(ah, is_reusable); - else if (caldata && caldata->done_txiqcal_once) + else if (caldata && test_bit(TXIQCAL_DONE, &caldata->cal_flags)) ar9003_hw_tx_iq_cal_reload(ah); ar9003_hw_cl_cal_post_proc(ah, is_reusable); diff --git a/drivers/net/wireless/ath/ath9k/ar9003_mci.c b/drivers/net/wireless/ath/ath9k/ar9003_mci.c index 8dd0692..7b94a6c 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_mci.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_mci.c @@ -753,9 +753,9 @@ int ar9003_mci_end_reset(struct ath_hw *ah, struct ath9k_channel *chan, 1 << AR_PHY_TIMING_CONTROL4_DO_GAIN_DC_IQ_CAL_SHIFT); if (caldata) { - caldata->done_txiqcal_once = false; - caldata->done_txclcal_once = false; - caldata->rtt_done = false; + clear_bit(TXIQCAL_DONE, &caldata->cal_flags); + clear_bit(TXCLCAL_DONE, &caldata->cal_flags); + clear_bit(RTT_DONE, &caldata->cal_flags); } if (!ath9k_hw_init_cal(ah, chan)) diff --git a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c index 74de353..e398c18 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c @@ -161,7 +161,7 @@ void ar9003_hw_rtt_fill_hist(struct ath_hw *ah) } } - ah->caldata->rtt_done = true; + set_bit(RTT_DONE, &ah->caldata->cal_flags); } void ar9003_hw_rtt_clear_hist(struct ath_hw *ah) @@ -176,7 +176,7 @@ void ar9003_hw_rtt_clear_hist(struct ath_hw *ah) } if (ah->caldata) - ah->caldata->rtt_done = false; + clear_bit(RTT_DONE, &ah->caldata->cal_flags); } bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan) @@ -186,7 +186,7 @@ bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan) if (!ah->caldata) return false; - if (!ah->caldata->rtt_done) + if (!test_bit(RTT_DONE, &ah->caldata->cal_flags)) return false; ar9003_hw_rtt_enable(ah); diff --git a/drivers/net/wireless/ath/ath9k/calib.c b/drivers/net/wireless/ath/ath9k/calib.c index 5e8219a..d438a03 100644 --- a/drivers/net/wireless/ath/ath9k/calib.c +++ b/drivers/net/wireless/ath/ath9k/calib.c @@ -119,7 +119,7 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, ath_dbg(common, CALIBRATE, "NFmid[%d] (%d) > MAX (%d), %s\n", i, h[i].privNF, limit->max, - (cal->nfcal_interference ? + (test_bit(NFCAL_INTF, &cal->cal_flags) ? "not corrected (due to interference)" : "correcting to MAX")); @@ -130,7 +130,7 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, * we bypass this limit here in order to better deal * with our environment. */ - if (!cal->nfcal_interference) + if (!test_bit(NFCAL_INTF, &cal->cal_flags)) h[i].privNF = limit->max; } } @@ -141,7 +141,7 @@ static void ath9k_hw_update_nfcal_hist_buffer(struct ath_hw *ah, * Re-enable the enforcement of the NF maximum again. */ if (!high_nf_mid) - cal->nfcal_interference = false; + clear_bit(NFCAL_INTF, &cal->cal_flags); } static bool ath9k_hw_get_nf_thresh(struct ath_hw *ah, @@ -220,7 +220,7 @@ EXPORT_SYMBOL(ath9k_hw_reset_calvalid); void ath9k_hw_start_nfcal(struct ath_hw *ah, bool update) { if (ah->caldata) - ah->caldata->nfcal_pending = true; + set_bit(NFCAL_PENDING, &ah->caldata->cal_flags); REG_SET_BIT(ah, AR_PHY_AGC_CONTROL, AR_PHY_AGC_CONTROL_ENABLE_NF); @@ -391,7 +391,7 @@ bool ath9k_hw_getnf(struct ath_hw *ah, struct ath9k_channel *chan) } h = caldata->nfCalHist; - caldata->nfcal_pending = false; + clear_bit(NFCAL_PENDING, &caldata->cal_flags); ath9k_hw_update_nfcal_hist_buffer(ah, caldata, nfarray); chan->noisefloor = h[0].privNF; ah->noise = ath9k_hw_getchan_noise(ah, chan); @@ -437,12 +437,12 @@ void ath9k_hw_bstuck_nfcal(struct ath_hw *ah) * the baseband update the internal NF value itself, similar to * what is being done after a full reset. */ - if (!caldata->nfcal_pending) + if (!test_bit(NFCAL_PENDING, &caldata->cal_flags)) ath9k_hw_start_nfcal(ah, true); else if (!(REG_READ(ah, AR_PHY_AGC_CONTROL) & AR_PHY_AGC_CONTROL_NF)) ath9k_hw_getnf(ah, ah->curchan); - caldata->nfcal_interference = true; + set_bit(NFCAL_INTF, &caldata->cal_flags); } EXPORT_SYMBOL(ath9k_hw_bstuck_nfcal); diff --git a/drivers/net/wireless/ath/ath9k/hw.c b/drivers/net/wireless/ath/ath9k/hw.c index d3206ab..f11e838 100644 --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c @@ -1847,9 +1847,9 @@ static int ath9k_hw_do_fastcc(struct ath_hw *ah, struct ath9k_channel *chan) * re-using are present. */ if (AR_SREV_9462(ah) && (ah->caldata && - (!ah->caldata->done_txiqcal_once || - !ah->caldata->done_txclcal_once || - !ah->caldata->rtt_done))) + (!test_bit(TXIQCAL_DONE, &ah->caldata->cal_flags) || + !test_bit(TXCLCAL_DONE, &ah->caldata->cal_flags) || + !test_bit(RTT_DONE, &ah->caldata->cal_flags)))) goto fail; ath_dbg(common, RESET, "FastChannelChange for %d -> %d\n", @@ -1905,7 +1905,7 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, memset(caldata, 0, sizeof(*caldata)); ath9k_init_nfcal_hist_buffer(ah, chan); } else if (caldata) { - caldata->paprd_packet_sent = false; + clear_bit(PAPRD_PACKET_SENT, &caldata->cal_flags); } ah->noise = ath9k_hw_getchan_noise(ah, chan); @@ -2042,8 +2042,8 @@ int ath9k_hw_reset(struct ath_hw *ah, struct ath9k_channel *chan, ath9k_hw_init_bb(ah, chan); if (caldata) { - caldata->done_txiqcal_once = false; - caldata->done_txclcal_once = false; + clear_bit(TXIQCAL_DONE, &caldata->cal_flags); + clear_bit(TXCLCAL_DONE, &caldata->cal_flags); } if (!ath9k_hw_init_cal(ah, chan)) return -EIO; diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index 5376011..e5e9270 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -404,20 +404,24 @@ enum ath9k_int { #define MAX_CL_TAB_ENTRY 16 #define CL_TAB_ENTRY(reg_base) (reg_base + (4 * j)) +enum ath9k_cal_flags { + RTT_DONE, + PAPRD_PACKET_SENT, + PAPRD_DONE, + NFCAL_PENDING, + NFCAL_INTF, + TXIQCAL_DONE, + TXCLCAL_DONE, +}; + struct ath9k_hw_cal_data { u16 channel; u32 channelFlags; u32 chanmode; + unsigned long cal_flags; int32_t CalValid; int8_t iCoff; int8_t qCoff; - bool rtt_done; - bool paprd_packet_sent; - bool paprd_done; - bool nfcal_pending; - bool nfcal_interference; - bool done_txiqcal_once; - bool done_txclcal_once; u16 small_signal_gain[AR9300_MAX_CHAINS]; u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ]; u32 num_measures[AR9300_MAX_CHAINS]; diff --git a/drivers/net/wireless/ath/ath9k/link.c b/drivers/net/wireless/ath/ath9k/link.c index 2f831db..84a6064 100644 --- a/drivers/net/wireless/ath/ath9k/link.c +++ b/drivers/net/wireless/ath/ath9k/link.c @@ -184,7 +184,7 @@ static void ath_paprd_activate(struct ath_softc *sc) struct ath9k_hw_cal_data *caldata = ah->caldata; int chain; - if (!caldata || !caldata->paprd_done) { + if (!caldata || !test_bit(PAPRD_DONE, &caldata->cal_flags)) { ath_dbg(common, CALIBRATE, "Failed to activate PAPRD\n"); return; } @@ -256,7 +256,9 @@ void ath_paprd_calibrate(struct work_struct *work) int len = 1800; int ret; - if (!caldata || !caldata->paprd_packet_sent || caldata->paprd_done) { + if (!caldata || + !test_bit(PAPRD_PACKET_SENT, &caldata->cal_flags) || + test_bit(PAPRD_DONE, &caldata->cal_flags)) { ath_dbg(common, CALIBRATE, "Skipping PAPRD calibration\n"); return; } @@ -316,7 +318,7 @@ void ath_paprd_calibrate(struct work_struct *work) kfree_skb(skb); if (chain_ok) { - caldata->paprd_done = true; + set_bit(PAPRD_DONE, &caldata->cal_flags); ath_paprd_activate(sc); } @@ -343,7 +345,7 @@ void ath_ani_calibrate(unsigned long data) u32 cal_interval, short_cal_interval, long_cal_interval; unsigned long flags; - if (ah->caldata && ah->caldata->nfcal_interference) + if (ah->caldata && test_bit(NFCAL_INTF, &ah->caldata->cal_flags)) long_cal_interval = ATH_LONG_CALINTERVAL_INT; else long_cal_interval = ATH_LONG_CALINTERVAL; @@ -432,7 +434,7 @@ set_timer: mod_timer(&common->ani.timer, jiffies + msecs_to_jiffies(cal_interval)); if (ar9003_is_paprd_enabled(ah) && ah->caldata) { - if (!ah->caldata->paprd_done) { + if (!test_bit(PAPRD_DONE, &ah->caldata->cal_flags)) { ieee80211_queue_work(sc->hw, &sc->paprd_work); } else if (!ah->paprd_table_write_done) { ath9k_ps_wakeup(sc); diff --git a/drivers/net/wireless/ath/ath9k/xmit.c b/drivers/net/wireless/ath/ath9k/xmit.c index 35b515f..62c93a6 100644 --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c @@ -2315,7 +2315,7 @@ static void ath_tx_complete(struct ath_softc *sc, struct sk_buff *skb, ath_dbg(common, XMIT, "TX complete: skb: %p\n", skb); if (sc->sc_ah->caldata) - sc->sc_ah->caldata->paprd_packet_sent = true; + set_bit(PAPRD_PACKET_SENT, &sc->sc_ah->caldata->cal_flags); if (!(tx_flags & ATH_TX_ERROR)) /* Frame was ACKed */ -- cgit v0.10.2 From 3001f0d00bcb77d818efa331864d69a9338550e6 Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Wed, 11 Sep 2013 16:36:32 +0530 Subject: ath9k: Fix PeakDetect calibration for AR9462 Since HW PeakDetect calibration is turned on for AR9462, various conditions have to be handled in the driver: * Enable agc_cal when loading RTT fails. * Disable SW PeakDetect calibration when RTT calibration is not enabled. * Keep SW PeakDetect calibration result in driver. * Update RTT table according to the saved value. * Write RTT back after modifying SW RTT table. * Enable local mode for PeakDetect calibration and restore values. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 687173c..22934d3 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -965,18 +965,44 @@ static void ar9003_hw_manual_peak_cal(struct ath_hw *ah, u8 chain, bool is_2g) } static void ar9003_hw_do_manual_peak_cal(struct ath_hw *ah, - struct ath9k_channel *chan) + struct ath9k_channel *chan, + bool run_rtt_cal) { + struct ath9k_hw_cal_data *caldata = ah->caldata; int i; if (!AR_SREV_9462(ah) && !AR_SREV_9565(ah) && !AR_SREV_9485(ah)) return; + if ((ah->caps.hw_caps & ATH9K_HW_CAP_RTT) && !run_rtt_cal) + return; + for (i = 0; i < AR9300_MAX_CHAINS; i++) { if (!(ah->rxchainmask & (1 << i))) continue; ar9003_hw_manual_peak_cal(ah, i, IS_CHAN_2GHZ(chan)); } + + if (caldata) + set_bit(SW_PKDET_DONE, &caldata->cal_flags); + + if ((ah->caps.hw_caps & ATH9K_HW_CAP_RTT) && caldata) { + if (IS_CHAN_2GHZ(chan)){ + caldata->caldac[0] = REG_READ_FIELD(ah, + AR_PHY_65NM_RXRF_AGC(0), + AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR); + caldata->caldac[1] = REG_READ_FIELD(ah, + AR_PHY_65NM_RXRF_AGC(1), + AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR); + } else { + caldata->caldac[0] = REG_READ_FIELD(ah, + AR_PHY_65NM_RXRF_AGC(0), + AR_PHY_65NM_RXRF_AGC_AGC5G_CALDAC_OVR); + caldata->caldac[1] = REG_READ_FIELD(ah, + AR_PHY_65NM_RXRF_AGC(1), + AR_PHY_65NM_RXRF_AGC_AGC5G_CALDAC_OVR); + } + } } static void ar9003_hw_cl_cal_post_proc(struct ath_hw *ah, bool is_reusable) @@ -1047,13 +1073,18 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, ar9003_hw_rtt_clear_hist(ah); } - if (rtt && !run_rtt_cal) { - agc_ctrl = REG_READ(ah, AR_PHY_AGC_CONTROL); - agc_supp_cals &= agc_ctrl; - agc_ctrl &= ~(AR_PHY_AGC_CONTROL_OFFSET_CAL | - AR_PHY_AGC_CONTROL_FLTR_CAL | - AR_PHY_AGC_CONTROL_PKDET_CAL); - REG_WRITE(ah, AR_PHY_AGC_CONTROL, agc_ctrl); + if (rtt) { + if (!run_rtt_cal) { + agc_ctrl = REG_READ(ah, AR_PHY_AGC_CONTROL); + agc_supp_cals &= agc_ctrl; + agc_ctrl &= ~(AR_PHY_AGC_CONTROL_OFFSET_CAL | + AR_PHY_AGC_CONTROL_FLTR_CAL | + AR_PHY_AGC_CONTROL_PKDET_CAL); + REG_WRITE(ah, AR_PHY_AGC_CONTROL, agc_ctrl); + } else { + if (ah->ah_flags & AH_FASTCC) + run_agc_cal = true; + } } if (ah->enabled_cals & TX_CL_CAL) { @@ -1124,7 +1155,7 @@ skip_tx_iqcal: AR_PHY_AGC_CONTROL_CAL, 0, AH_WAIT_TIMEOUT); - ar9003_hw_do_manual_peak_cal(ah, chan); + ar9003_hw_do_manual_peak_cal(ah, chan, run_rtt_cal); } if (REG_READ(ah, AR_PHY_CL_CAL_CTL) & AR_PHY_CL_CAL_ENABLE) { @@ -1159,12 +1190,16 @@ skip_tx_iqcal: if (run_rtt_cal && caldata) { if (is_reusable) { - if (!ath9k_hw_rfbus_req(ah)) + if (!ath9k_hw_rfbus_req(ah)) { ath_err(ath9k_hw_common(ah), "Could not stop baseband\n"); - else + } else { ar9003_hw_rtt_fill_hist(ah); + if (test_bit(SW_PKDET_DONE, &caldata->cal_flags)) + ar9003_hw_rtt_load_hist(ah); + } + ath9k_hw_rfbus_done(ah); } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c index e398c18..9344188 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_rtt.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_rtt.c @@ -118,6 +118,27 @@ void ar9003_hw_rtt_load_hist(struct ath_hw *ah) } } +static void ar9003_hw_patch_rtt(struct ath_hw *ah, int index, int chain) +{ + int agc, caldac; + + if (!test_bit(SW_PKDET_DONE, &ah->caldata->cal_flags)) + return; + + if ((index != 5) || (chain >= 2)) + return; + + agc = REG_READ_FIELD(ah, AR_PHY_65NM_RXRF_AGC(chain), + AR_PHY_65NM_RXRF_AGC_AGC_OVERRIDE); + if (!agc) + return; + + caldac = ah->caldata->caldac[chain]; + ah->caldata->rtt_table[chain][index] &= 0xFFFF05FF; + caldac = (caldac & 0x20) | ((caldac & 0x1F) << 7); + ah->caldata->rtt_table[chain][index] |= (caldac << 4); +} + static int ar9003_hw_rtt_fill_hist_entry(struct ath_hw *ah, u8 chain, u32 index) { u32 val; @@ -155,6 +176,9 @@ void ar9003_hw_rtt_fill_hist(struct ath_hw *ah) for (i = 0; i < MAX_RTT_TABLE_ENTRY; i++) { ah->caldata->rtt_table[chain][i] = ar9003_hw_rtt_fill_hist_entry(ah, chain, i); + + ar9003_hw_patch_rtt(ah, i, chain); + ath_dbg(ath9k_hw_common(ah), CALIBRATE, "RTT value at idx %d, chain %d is: 0x%x\n", i, chain, ah->caldata->rtt_table[chain][i]); @@ -186,11 +210,37 @@ bool ar9003_hw_rtt_restore(struct ath_hw *ah, struct ath9k_channel *chan) if (!ah->caldata) return false; + if (test_bit(SW_PKDET_DONE, &ah->caldata->cal_flags)) { + if (IS_CHAN_2GHZ(chan)){ + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(0), + AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, + ah->caldata->caldac[0]); + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(1), + AR_PHY_65NM_RXRF_AGC_AGC2G_CALDAC_OVR, + ah->caldata->caldac[1]); + } else { + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(0), + AR_PHY_65NM_RXRF_AGC_AGC5G_CALDAC_OVR, + ah->caldata->caldac[0]); + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(1), + AR_PHY_65NM_RXRF_AGC_AGC5G_CALDAC_OVR, + ah->caldata->caldac[1]); + } + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(1), + AR_PHY_65NM_RXRF_AGC_AGC_OVERRIDE, 0x1); + REG_RMW_FIELD(ah, AR_PHY_65NM_RXRF_AGC(0), + AR_PHY_65NM_RXRF_AGC_AGC_OVERRIDE, 0x1); + } + if (!test_bit(RTT_DONE, &ah->caldata->cal_flags)) return false; ar9003_hw_rtt_enable(ah); - ar9003_hw_rtt_set_mask(ah, 0x10); + + if (test_bit(SW_PKDET_DONE, &ah->caldata->cal_flags)) + ar9003_hw_rtt_set_mask(ah, 0x30); + else + ar9003_hw_rtt_set_mask(ah, 0x10); if (!ath9k_hw_rfbus_req(ah)) { ath_err(ath9k_hw_common(ah), "Could not stop baseband\n"); diff --git a/drivers/net/wireless/ath/ath9k/hw.h b/drivers/net/wireless/ath/ath9k/hw.h index e5e9270..2babf93 100644 --- a/drivers/net/wireless/ath/ath9k/hw.h +++ b/drivers/net/wireless/ath/ath9k/hw.h @@ -412,6 +412,7 @@ enum ath9k_cal_flags { NFCAL_INTF, TXIQCAL_DONE, TXCLCAL_DONE, + SW_PKDET_DONE, }; struct ath9k_hw_cal_data { @@ -422,6 +423,7 @@ struct ath9k_hw_cal_data { int32_t CalValid; int8_t iCoff; int8_t qCoff; + u8 caldac[2]; u16 small_signal_gain[AR9300_MAX_CHAINS]; u32 pa_table[AR9300_MAX_CHAINS][PAPRD_TABLE_SZ]; u32 num_measures[AR9300_MAX_CHAINS]; -- cgit v0.10.2 From 60751001e814cd70220fee7868c5a0368bdf984a Mon Sep 17 00:00:00 2001 From: Gabor Juhos Date: Wed, 11 Sep 2013 19:56:45 +0200 Subject: rt2x00: rt2800lib: fix band selection and LNA PE control for RT3593 PCIe cards The band selection and PE control code for the RT3593 chipsets only handles USB based devices currently. Due to this limitation RT3593 based PCIe cards are not working correctly. On PCIe cards band selection is controlled via GPIO #8 which is identical to the USB devices. The LNA PE control is slightly different, all LNA PEs are controlled by GPIO #4. Update the code to configure the GPIO_CTRL register correctly on PCIe devices. Cc: Steven Liu Cc: JasonYS Cheng Signed-off-by: Gabor Juhos Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 470a7aa..786420c 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3315,29 +3315,37 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_rfcsr_write(rt2x00dev, 8, 0x80); if (rt2x00_rt(rt2x00dev, RT3593)) { - if (rt2x00_is_usb(rt2x00dev)) { - rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); + rt2800_register_read(rt2x00dev, GPIO_CTRL, ®); - /* Band selection. GPIO #8 controls all paths */ + /* Band selection */ + if (rt2x00_is_usb(rt2x00dev) || + rt2x00_is_pcie(rt2x00dev)) { + /* GPIO #8 controls all paths */ rt2x00_set_field32(®, GPIO_CTRL_DIR8, 0); if (rf->channel <= 14) rt2x00_set_field32(®, GPIO_CTRL_VAL8, 1); else rt2x00_set_field32(®, GPIO_CTRL_VAL8, 0); + } + /* LNA PE control. */ + if (rt2x00_is_usb(rt2x00dev)) { + /* GPIO #4 controls PE0 and PE1, + * GPIO #7 controls PE2 + */ rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); rt2x00_set_field32(®, GPIO_CTRL_DIR7, 0); - /* LNA PE control. - * GPIO #4 controls PE0 and PE1, - * GPIO #7 controls PE2 - */ rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); rt2x00_set_field32(®, GPIO_CTRL_VAL7, 1); - - rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + } else if (rt2x00_is_pcie(rt2x00dev)) { + /* GPIO #4 controls PE0, PE1 and PE2 */ + rt2x00_set_field32(®, GPIO_CTRL_DIR4, 0); + rt2x00_set_field32(®, GPIO_CTRL_VAL4, 1); } + rt2800_register_write(rt2x00dev, GPIO_CTRL, reg); + /* AGC init */ if (rf->channel <= 14) reg = 0x1c + 2 * rt2x00dev->lna_gain; -- cgit v0.10.2 From 8e70eb8092754fa92a249f0ed1bc40ab7639b850 Mon Sep 17 00:00:00 2001 From: Chris Metcalf Date: Fri, 13 Sep 2013 12:14:09 -0400 Subject: ath9k: mark wmi_event_swba as __packed The other structures in wmi.h are already marked this way. Without this marking, we get an unaliged access panic in the tilegx kernel: Starting stack dump of tid 0, pid 0 (swapper) on cpu 35 at cycle 198675113844 frame 0: 0xfffffff7103ada90 ath9k_htc_swba+0x120/0x618 [ath9k_htc] frame 1: 0xfffffff7103a4b10 ath9k_wmi_event_tasklet+0x1b0/0x270 [ath9k_htc] frame 2: 0xfffffff700326570 tasklet_action+0x148/0x298 [...] Signed-off-by: Chris Metcalf Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/wmi.h b/drivers/net/wireless/ath/ath9k/wmi.h index fde6da6..0db37f2 100644 --- a/drivers/net/wireless/ath/ath9k/wmi.h +++ b/drivers/net/wireless/ath/ath9k/wmi.h @@ -39,7 +39,7 @@ struct wmi_fw_version { struct wmi_event_swba { __be64 tsf; u8 beacon_pending; -}; +} __packed; /* * 64 - HTC header - WMI header - 1 / txstatus -- cgit v0.10.2 From 5952bd806c95f53b6412918c76d4f95d6ebc125e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Fri, 13 Sep 2013 12:44:27 -0500 Subject: rtlwifi: rtl8192cu: Convert driver to use rtl_process_phyinfo() Remove routine _rtl92c_process_phyinfo() by using the equivalent routine in driver rtlwifi. This change also allows the removal of 5 additional routines from rtl8192cu. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c index da4f587..3936853 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/mac.c @@ -32,6 +32,7 @@ #include "../usb.h" #include "../ps.h" #include "../cam.h" +#include "../stats.h" #include "reg.h" #include "def.h" #include "phy.h" @@ -738,16 +739,6 @@ static u8 _rtl92c_evm_db_to_percentage(char value) return ret_val; } -static long _rtl92c_translate_todbm(struct ieee80211_hw *hw, - u8 signal_strength_index) -{ - long signal_power; - - signal_power = (long)((signal_strength_index + 1) >> 1); - signal_power -= 95; - return signal_power; -} - static long _rtl92c_signal_scale_mapping(struct ieee80211_hw *hw, long currsig) { @@ -913,180 +904,6 @@ static void _rtl92c_query_rxphystatus(struct ieee80211_hw *hw, (hw, total_rssi /= rf_rx_num)); } -static void _rtl92c_process_ui_rssi(struct ieee80211_hw *hw, - struct rtl_stats *pstats) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_phy *rtlphy = &(rtlpriv->phy); - u8 rfpath; - u32 last_rssi, tmpval; - - if (pstats->packet_toself || pstats->packet_beacon) { - rtlpriv->stats.rssi_calculate_cnt++; - if (rtlpriv->stats.ui_rssi.total_num++ >= - PHY_RSSI_SLID_WIN_MAX) { - rtlpriv->stats.ui_rssi.total_num = - PHY_RSSI_SLID_WIN_MAX; - last_rssi = - rtlpriv->stats.ui_rssi.elements[rtlpriv-> - stats.ui_rssi.index]; - rtlpriv->stats.ui_rssi.total_val -= last_rssi; - } - rtlpriv->stats.ui_rssi.total_val += pstats->signalstrength; - rtlpriv->stats.ui_rssi.elements[rtlpriv->stats.ui_rssi. - index++] = pstats->signalstrength; - if (rtlpriv->stats.ui_rssi.index >= PHY_RSSI_SLID_WIN_MAX) - rtlpriv->stats.ui_rssi.index = 0; - tmpval = rtlpriv->stats.ui_rssi.total_val / - rtlpriv->stats.ui_rssi.total_num; - rtlpriv->stats.signal_strength = - _rtl92c_translate_todbm(hw, (u8) tmpval); - pstats->rssi = rtlpriv->stats.signal_strength; - } - if (!pstats->is_cck && pstats->packet_toself) { - for (rfpath = RF90_PATH_A; rfpath < rtlphy->num_total_rfpath; - rfpath++) { - if (!rtl8192_phy_check_is_legal_rfpath(hw, rfpath)) - continue; - if (rtlpriv->stats.rx_rssi_percentage[rfpath] == 0) { - rtlpriv->stats.rx_rssi_percentage[rfpath] = - pstats->rx_mimo_signalstrength[rfpath]; - } - if (pstats->rx_mimo_signalstrength[rfpath] > - rtlpriv->stats.rx_rssi_percentage[rfpath]) { - rtlpriv->stats.rx_rssi_percentage[rfpath] = - ((rtlpriv->stats. - rx_rssi_percentage[rfpath] * - (RX_SMOOTH_FACTOR - 1)) + - (pstats->rx_mimo_signalstrength[rfpath])) / - (RX_SMOOTH_FACTOR); - - rtlpriv->stats.rx_rssi_percentage[rfpath] = - rtlpriv->stats.rx_rssi_percentage[rfpath] + - 1; - } else { - rtlpriv->stats.rx_rssi_percentage[rfpath] = - ((rtlpriv->stats. - rx_rssi_percentage[rfpath] * - (RX_SMOOTH_FACTOR - 1)) + - (pstats->rx_mimo_signalstrength[rfpath])) / - (RX_SMOOTH_FACTOR); - } - } - } -} - -static void _rtl92c_update_rxsignalstatistics(struct ieee80211_hw *hw, - struct rtl_stats *pstats) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - int weighting = 0; - - if (rtlpriv->stats.recv_signal_power == 0) - rtlpriv->stats.recv_signal_power = pstats->recvsignalpower; - if (pstats->recvsignalpower > rtlpriv->stats.recv_signal_power) - weighting = 5; - else if (pstats->recvsignalpower < rtlpriv->stats.recv_signal_power) - weighting = (-5); - rtlpriv->stats.recv_signal_power = - (rtlpriv->stats.recv_signal_power * 5 + - pstats->recvsignalpower + weighting) / 6; -} - -static void _rtl92c_process_pwdb(struct ieee80211_hw *hw, - struct rtl_stats *pstats) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_mac *mac = rtl_mac(rtl_priv(hw)); - long undec_sm_pwdb = 0; - - if (mac->opmode == NL80211_IFTYPE_ADHOC) { - return; - } else { - undec_sm_pwdb = rtlpriv->dm.undec_sm_pwdb; - } - if (pstats->packet_toself || pstats->packet_beacon) { - if (undec_sm_pwdb < 0) - undec_sm_pwdb = pstats->rx_pwdb_all; - if (pstats->rx_pwdb_all > (u32) undec_sm_pwdb) { - undec_sm_pwdb = (((undec_sm_pwdb) * - (RX_SMOOTH_FACTOR - 1)) + - (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR); - undec_sm_pwdb += 1; - } else { - undec_sm_pwdb = (((undec_sm_pwdb) * - (RX_SMOOTH_FACTOR - 1)) + - (pstats->rx_pwdb_all)) / (RX_SMOOTH_FACTOR); - } - rtlpriv->dm.undec_sm_pwdb = undec_sm_pwdb; - _rtl92c_update_rxsignalstatistics(hw, pstats); - } -} - -static void _rtl92c_process_LINK_Q(struct ieee80211_hw *hw, - struct rtl_stats *pstats) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - u32 last_evm = 0, n_stream, tmpval; - - if (pstats->signalquality != 0) { - if (pstats->packet_toself || pstats->packet_beacon) { - if (rtlpriv->stats.LINK_Q.total_num++ >= - PHY_LINKQUALITY_SLID_WIN_MAX) { - rtlpriv->stats.LINK_Q.total_num = - PHY_LINKQUALITY_SLID_WIN_MAX; - last_evm = - rtlpriv->stats.LINK_Q.elements - [rtlpriv->stats.LINK_Q.index]; - rtlpriv->stats.LINK_Q.total_val -= - last_evm; - } - rtlpriv->stats.LINK_Q.total_val += - pstats->signalquality; - rtlpriv->stats.LINK_Q.elements - [rtlpriv->stats.LINK_Q.index++] = - pstats->signalquality; - if (rtlpriv->stats.LINK_Q.index >= - PHY_LINKQUALITY_SLID_WIN_MAX) - rtlpriv->stats.LINK_Q.index = 0; - tmpval = rtlpriv->stats.LINK_Q.total_val / - rtlpriv->stats.LINK_Q.total_num; - rtlpriv->stats.signal_quality = tmpval; - rtlpriv->stats.last_sigstrength_inpercent = tmpval; - for (n_stream = 0; n_stream < 2; - n_stream++) { - if (pstats->RX_SIGQ[n_stream] != -1) { - if (!rtlpriv->stats.RX_EVM[n_stream]) { - rtlpriv->stats.RX_EVM[n_stream] - = pstats->RX_SIGQ[n_stream]; - } - rtlpriv->stats.RX_EVM[n_stream] = - ((rtlpriv->stats.RX_EVM - [n_stream] * - (RX_SMOOTH_FACTOR - 1)) + - (pstats->RX_SIGQ - [n_stream] * 1)) / - (RX_SMOOTH_FACTOR); - } - } - } - } else { - ; - } -} - -static void _rtl92c_process_phyinfo(struct ieee80211_hw *hw, - u8 *buffer, - struct rtl_stats *pcurrent_stats) -{ - if (!pcurrent_stats->packet_matchbssid && - !pcurrent_stats->packet_beacon) - return; - _rtl92c_process_ui_rssi(hw, pcurrent_stats); - _rtl92c_process_pwdb(hw, pcurrent_stats); - _rtl92c_process_LINK_Q(hw, pcurrent_stats); -} - void rtl92c_translate_rx_signal_stuff(struct ieee80211_hw *hw, struct sk_buff *skb, struct rtl_stats *pstats, @@ -1123,5 +940,5 @@ void rtl92c_translate_rx_signal_stuff(struct ieee80211_hw *hw, _rtl92c_query_rxphystatus(hw, pstats, pdesc, p_drvinfo, packet_matchbssid, packet_toself, packet_beacon); - _rtl92c_process_phyinfo(hw, tmp_buf, pstats); + rtl_process_phyinfo(hw, tmp_buf, pstats); } -- cgit v0.10.2 From 8a5b7ab36b46615874da3764b99c9d26c1e6750d Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 16 Sep 2013 10:36:59 +0530 Subject: ath9k: Fix NF calibration for single stream cards Rather than using the chip ID to read only chain-0 CCA registers and avoid reading chain-1, use the RX chainmask instead. There are some 1-stream PCI devices based on AR9287 such as TL-WN751ND. Improper NF calibration might result in DMA errors/timeouts. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar9002_phy.c b/drivers/net/wireless/ath/ath9k/ar9002_phy.c index 7a5569b..17970d4 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_phy.c @@ -485,7 +485,7 @@ static void ar9002_hw_do_getnf(struct ath_hw *ah, if (IS_CHAN_HT40(ah->curchan)) nfarray[3] = sign_extend32(nf, 8); - if (AR_SREV_9285(ah) || AR_SREV_9271(ah)) + if (!(ah->rxchainmask & BIT(1))) return; nf = MS(REG_READ(ah, AR_PHY_CH1_CCA), AR9280_PHY_CH1_MINCCA_PWR); -- cgit v0.10.2 From c6cc47b101c547c328cae06c2d8813a8e69549bf Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 16 Sep 2013 10:37:00 +0530 Subject: ath9k: Handle FATAL interrupts correctly When a FATAL interrupt is received, a full chip reset is required, which is done in the main tasklet. But since the reset routine is scheduled as a work item, make sure that interrupts are not enabled in the tasklet before the reset is done. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index e4f6590..cdb3b1e 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -362,6 +362,13 @@ void ath9k_tasklet(unsigned long data) type = RESET_TYPE_BB_WATCHDOG; ath9k_queue_reset(sc, type); + + /* + * Increment the ref. counter here so that + * interrupts are enabled in the reset routine. + */ + atomic_inc(&ah->intr_ref_cnt); + ath_dbg(common, ANY, "FATAL: Skipping interrupts\n"); goto out; } @@ -400,10 +407,9 @@ void ath9k_tasklet(unsigned long data) ath9k_btcoex_handle_interrupt(sc, status); -out: /* re-enable hardware interrupt */ ath9k_hw_enable_interrupts(ah); - +out: spin_unlock(&sc->sc_pcu_lock); ath9k_ps_restore(sc); } -- cgit v0.10.2 From 551ed409690d05a3af7a330b188501fd1593e6af Mon Sep 17 00:00:00 2001 From: Sujith Manoharan Date: Mon, 16 Sep 2013 10:37:01 +0530 Subject: ath9k: Remove incorrect diversity initialization Fast antenna diversity is required only for single chain chips and the diversity initialization is done in the per-family board setup routines. Enabling of diversity should be done based on the calibrated EEPROM/OTP data, doing it for all chips is incorrect. Remove the code that sets the fast_div bit for all cards, since the documentation for the AR_PHY_CCK_DETECT register says: reg 642: sig_detect_cck enable_ant_fast_div : Only used for single chain chips. Signed-off-by: Sujith Manoharan Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ath/ath9k/ar5008_phy.c b/drivers/net/wireless/ath/ath9k/ar5008_phy.c index 9e4e2a6..cb6435e 100644 --- a/drivers/net/wireless/ath/ath9k/ar5008_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar5008_phy.c @@ -631,9 +631,6 @@ static void ar5008_hw_override_ini(struct ath_hw *ah, REG_WRITE(ah, AR_PCU_MISC_MODE2, val); } - REG_SET_BIT(ah, AR_PHY_CCK_DETECT, - AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); - if (AR_SREV_9280_20_OR_LATER(ah)) return; /* diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index ec37213..0131ba2 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -632,9 +632,6 @@ static void ar9003_hw_override_ini(struct ath_hw *ah) AR_PCU_MISC_MODE2_CFP_IGNORE; REG_WRITE(ah, AR_PCU_MISC_MODE2, val); - REG_SET_BIT(ah, AR_PHY_CCK_DETECT, - AR_PHY_CCK_DETECT_BB_ENABLE_ANT_FAST_DIV); - if (AR_SREV_9462(ah) || AR_SREV_9565(ah)) { REG_WRITE(ah, AR_GLB_SWREG_DISCONT_MODE, AR_GLB_SWREG_DISCONT_EN_BT_WLAN); -- cgit v0.10.2 From 3a1ea9fd935139027e60157fa5d5bf8555414de3 Mon Sep 17 00:00:00 2001 From: Catalin Iacob Date: Sun, 22 Sep 2013 11:06:26 +0200 Subject: rtlwifi: remove duplicate declarations and macros in headers This patch brings no functional change. There are still duplicate macros across the rtlwifi directory, for example IQK_DELAY_TIME is defined multiple times, sometimes with different values, this patch only removes duplicates within the same header file. Signed-off-by: Catalin Iacob Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/base.h b/drivers/net/wireless/rtlwifi/base.h index 0e5fe09..c07f114 100644 --- a/drivers/net/wireless/rtlwifi/base.h +++ b/drivers/net/wireless/rtlwifi/base.h @@ -114,7 +114,6 @@ void rtl_init_rfkill(struct ieee80211_hw *hw); void rtl_deinit_rfkill(struct ieee80211_hw *hw); void rtl_beacon_statistic(struct ieee80211_hw *hw, struct sk_buff *skb); -void rtl_watch_dog_timer_callback(unsigned long data); void rtl_deinit_deferred_work(struct ieee80211_hw *hw); bool rtl_action_proc(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx); diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h index cec10d6..24957e2 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h +++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h @@ -39,9 +39,7 @@ #define RT_CANNOT_IO(hw) false #define HIGHPOWER_RADIOA_ARRAYLEN 22 -#define IQK_ADDA_REG_NUM 16 #define MAX_TOLERANCE 5 -#define IQK_DELAY_TIME 1 #define APK_BB_REG_NUM 5 #define APK_AFE_REG_NUM 16 diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h index 3cfa1bb..fa24de4 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/def.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/def.h @@ -152,8 +152,6 @@ enum version_8192c { #define IS_VENDOR_UMC_A_CUT(version) ((IS_CHIP_VENDOR_UMC(version)) ? \ ((GET_CVID_CUT_VERSION(version)) ? false : true) : false) #define IS_CHIP_VER_B(version) ((version & CHIP_VER_B) ? true : false) -#define IS_VENDOR_UMC_A_CUT(version) ((IS_CHIP_VENDOR_UMC(version)) ? \ - ((GET_CVID_CUT_VERSION(version)) ? false : true) : false) #define IS_92C_SERIAL(version) ((version & CHIP_92C_BITMASK) ? true : false) #define IS_CHIP_VENDOR_UMC(version) \ ((version & CHIP_VENDOR_UMC) ? true : false) diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h index d5e3b70..80a0893 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h @@ -39,9 +39,7 @@ #define RT_CANNOT_IO(hw) false #define HIGHPOWER_RADIOA_ARRAYLEN 22 -#define IQK_ADDA_REG_NUM 16 #define MAX_TOLERANCE 5 -#define IQK_DELAY_TIME 1 #define APK_BB_REG_NUM 5 #define APK_AFE_REG_NUM 16 @@ -226,7 +224,6 @@ bool rtl92c_phy_config_rf_with_headerfile(struct ieee80211_hw *hw, enum radio_path rfpath); bool rtl8192_phy_check_is_legal_rfpath(struct ieee80211_hw *hw, u32 rfpath); -bool rtl92c_phy_set_io_cmd(struct ieee80211_hw *hw, enum io_type iotype); bool rtl92ce_phy_set_rf_power_state(struct ieee80211_hw *hw, enum rf_pwrstate rfpwr_state); void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw); diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h index bd4aef7..8922ecb 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/reg.h @@ -560,7 +560,6 @@ #define EEPROM_DEFAULT_TXPOWERLEVEL 0x22 #define EEPROM_DEFAULT_HT40_2SDIFF 0x0 #define EEPROM_DEFAULT_HT20_DIFF 2 -#define EEPROM_DEFAULT_LEGACYHTTXPOWERDIFF 0x3 #define EEPROM_DEFAULT_HT40_PWRMAXOFFSET 0 #define EEPROM_DEFAULT_HT20_PWRMAXOFFSET 0 @@ -639,17 +638,8 @@ #define EEPROM_TXPWR_GROUP 0x6F -#define EEPROM_TSSI_A 0x76 -#define EEPROM_TSSI_B 0x77 -#define EEPROM_THERMAL_METER 0x78 - #define EEPROM_CHANNELPLAN 0x75 -#define RF_OPTION1 0x79 -#define RF_OPTION2 0x7A -#define RF_OPTION3 0x7B -#define RF_OPTION4 0x7C - #define STOPBECON BIT(6) #define STOPHIGHT BIT(5) #define STOPMGT BIT(4) @@ -689,13 +679,6 @@ #define RSV_CTRL 0x001C #define RD_CTRL 0x0524 -#define REG_USB_INFO 0xFE17 -#define REG_USB_SPECIAL_OPTION 0xFE55 - -#define REG_USB_DMA_AGG_TO 0xFE5B -#define REG_USB_AGG_TO 0xFE5C -#define REG_USB_AGG_TH 0xFE5D - #define REG_USB_VID 0xFE60 #define REG_USB_PID 0xFE62 #define REG_USB_OPTIONAL 0xFE64 @@ -1196,9 +1179,6 @@ #define POLLING_LLT_THRESHOLD 20 #define POLLING_READY_TIMEOUT_COUNT 1000 -#define MAX_MSS_DENSITY_2T 0x13 -#define MAX_MSS_DENSITY_1T 0x0A - #define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6)) #define EPROM_CMD_CONFIG 0x3 #define EPROM_CMD_LOAD 1 diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.h b/drivers/net/wireless/rtlwifi/rtl8192de/phy.h index f074952..a66232e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.h +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.h @@ -39,9 +39,7 @@ #define RT_CANNOT_IO(hw) false #define HIGHPOWER_RADIOA_ARRAYLEN 22 -#define IQK_ADDA_REG_NUM 16 #define MAX_TOLERANCE 5 -#define IQK_DELAY_TIME 1 #define APK_BB_REG_NUM 5 #define APK_AFE_REG_NUM 16 @@ -173,6 +171,5 @@ void rtl92d_acquire_cckandrw_pagea_ctl(struct ieee80211_hw *hw, unsigned long *flag); u8 rtl92d_get_rightchnlplace_for_iqk(u8 chnl); void rtl92d_phy_reload_iqk_setting(struct ieee80211_hw *hw, u8 channel); -void rtl92d_phy_iq_calibrate(struct ieee80211_hw *hw); #endif diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/reg.h b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h index 84d1181..c81c835 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/reg.h +++ b/drivers/net/wireless/rtlwifi/rtl8192se/reg.h @@ -425,14 +425,9 @@ #define EXT_IMEM_CODE_DONE BIT(2) #define IMEM_CHK_RPT BIT(1) #define IMEM_CODE_DONE BIT(0) -#define IMEM_CODE_DONE BIT(0) -#define IMEM_CHK_RPT BIT(1) #define EMEM_CODE_DONE BIT(2) #define EMEM_CHK_RPT BIT(3) -#define DMEM_CODE_DONE BIT(4) #define IMEM_RDY BIT(5) -#define BASECHG BIT(6) -#define FWRDY BIT(7) #define LOAD_FW_READY (IMEM_CODE_DONE | \ IMEM_CHK_RPT | \ EMEM_CODE_DONE | \ diff --git a/drivers/net/wireless/rtlwifi/wifi.h b/drivers/net/wireless/rtlwifi/wifi.h index cc03e7c..96763dc 100644 --- a/drivers/net/wireless/rtlwifi/wifi.h +++ b/drivers/net/wireless/rtlwifi/wifi.h @@ -192,8 +192,6 @@ enum hardware_type { (IS_HARDWARE_TYPE_8192DE(rtlhal) || IS_HARDWARE_TYPE_8192DU(rtlhal)) #define IS_HARDWARE_TYPE_8723(rtlhal) \ (IS_HARDWARE_TYPE_8723E(rtlhal) || IS_HARDWARE_TYPE_8723U(rtlhal)) -#define IS_HARDWARE_TYPE_8723U(rtlhal) \ - (rtlhal->hw_type == HARDWARE_TYPE_RTL8723U) #define RX_HAL_IS_CCK_RATE(_pdesc)\ (_pdesc->rxmcs == DESC92_RATE1M || \ -- cgit v0.10.2 From c8820cf2afbded8e75575dcafd6c99aeea06df0c Mon Sep 17 00:00:00 2001 From: Peter Senna Tschudin Date: Sun, 22 Sep 2013 22:22:46 +0200 Subject: wireless: rtlwifi: Replace variable with a break This patch removes the variable continual, and change the while loop to break when efuse_data == 0xFF. Tested by compilation only. CC: Joe Perches Signed-off-by: Peter Senna Tschudin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/efuse.c b/drivers/net/wireless/rtlwifi/efuse.c index 838a1ed..ae13fb9 100644 --- a/drivers/net/wireless/rtlwifi/efuse.c +++ b/drivers/net/wireless/rtlwifi/efuse.c @@ -1203,20 +1203,18 @@ static void efuse_power_switch(struct ieee80211_hw *hw, u8 write, u8 pwrstate) static u16 efuse_get_current_size(struct ieee80211_hw *hw) { - int continual = true; u16 efuse_addr = 0; u8 hworden; u8 efuse_data, word_cnts; - while (continual && efuse_one_byte_read(hw, efuse_addr, &efuse_data) - && (efuse_addr < EFUSE_MAX_SIZE)) { - if (efuse_data != 0xFF) { - hworden = efuse_data & 0x0F; - word_cnts = efuse_calculate_word_cnts(hworden); - efuse_addr = efuse_addr + (word_cnts * 2) + 1; - } else { - continual = false; - } + while (efuse_one_byte_read(hw, efuse_addr, &efuse_data) && + efuse_addr < EFUSE_MAX_SIZE) { + if (efuse_data == 0xFF) + break; + + hworden = efuse_data & 0x0F; + word_cnts = efuse_calculate_word_cnts(hworden); + efuse_addr = efuse_addr + (word_cnts * 2) + 1; } return efuse_addr; -- cgit v0.10.2 From 772eb433357704ec3d6e0daa727d9ec3e85f50c1 Mon Sep 17 00:00:00 2001 From: Kevin Lo Date: Wed, 18 Sep 2013 16:22:44 +0800 Subject: rt2x00: Fix rf register for RT3070 Fix RT3070 chip RF initial value to be similar to the latest Ralink vendor driver. Tested on Asus N13 usb wifi dongle. Signed-off-by: Kevin Lo Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index 786420c..f414978 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -5993,7 +5993,7 @@ static void rt2800_init_rfcsr_30xx(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 20, 0xba); rt2800_rfcsr_write(rt2x00dev, 21, 0xdb); rt2800_rfcsr_write(rt2x00dev, 24, 0x16); - rt2800_rfcsr_write(rt2x00dev, 25, 0x01); + rt2800_rfcsr_write(rt2x00dev, 25, 0x03); rt2800_rfcsr_write(rt2x00dev, 29, 0x1f); if (rt2x00_rt_rev_lt(rt2x00dev, RT3070, REV_RT3070F)) { -- cgit v0.10.2 From 187e52cc3c9f5ee64136f8b5c4edcb4cf94693e7 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 17 Sep 2013 18:41:20 +0300 Subject: wlcore: ROC on AP channel before auth reply Start a ROC on the AP channel beforing sending the authentication reply to a connecting STA. This ROC is held up to 1 second via a timer. If the station is authorized and added by mac80211, the ROC is extended until the station is fully authorized. We make sure not to ROC twice when several stations are connecting in parallel and to only release the ROC when both the pending-reply timer and the STA-state callbacks do not require it. Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index c30e1f1..3c7b8a4 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2008,6 +2008,47 @@ out: mutex_unlock(&wl->mutex); } +static void wlcore_pending_auth_complete_work(struct work_struct *work) +{ + struct delayed_work *dwork; + struct wl1271 *wl; + struct wl12xx_vif *wlvif; + unsigned long time_spare; + int ret; + + dwork = container_of(work, struct delayed_work, work); + wlvif = container_of(dwork, struct wl12xx_vif, + pending_auth_complete_work); + wl = wlvif->wl; + + mutex_lock(&wl->mutex); + + if (unlikely(wl->state != WLCORE_STATE_ON)) + goto out; + + /* + * Make sure a second really passed since the last auth reply. Maybe + * a second auth reply arrived while we were stuck on the mutex. + * Check for a little less than the timeout to protect from scheduler + * irregularities. + */ + time_spare = jiffies + + msecs_to_jiffies(WLCORE_PEND_AUTH_ROC_TIMEOUT - 50); + if (!time_after(time_spare, wlvif->pending_auth_reply_time)) + goto out; + + ret = wl1271_ps_elp_wakeup(wl); + if (ret < 0) + goto out; + + /* cancel the ROC if active */ + wlcore_update_inconn_sta(wl, wlvif, NULL, false); + + wl1271_ps_elp_sleep(wl); +out: + mutex_unlock(&wl->mutex); +} + static int wl12xx_allocate_rate_policy(struct wl1271 *wl, u8 *idx) { u8 policy = find_first_zero_bit(wl->rate_policies_map, @@ -2159,6 +2200,8 @@ static int wl12xx_init_vif_data(struct wl1271 *wl, struct ieee80211_vif *vif) wlcore_channel_switch_work); INIT_DELAYED_WORK(&wlvif->connection_loss_work, wlcore_connection_loss_work); + INIT_DELAYED_WORK(&wlvif->pending_auth_complete_work, + wlcore_pending_auth_complete_work); INIT_LIST_HEAD(&wlvif->list); setup_timer(&wlvif->rx_streaming_timer, wl1271_rx_streaming_timer, @@ -2590,6 +2633,7 @@ unlock: cancel_work_sync(&wlvif->rx_streaming_disable_work); cancel_delayed_work_sync(&wlvif->connection_loss_work); cancel_delayed_work_sync(&wlvif->channel_switch_work); + cancel_delayed_work_sync(&wlvif->pending_auth_complete_work); mutex_lock(&wl->mutex); } @@ -3969,6 +4013,13 @@ static void wl1271_bss_info_changed_ap(struct wl1271 *wl, } } else { if (test_bit(WLVIF_FLAG_AP_STARTED, &wlvif->flags)) { + /* + * AP might be in ROC in case we have just + * sent auth reply. handle it. + */ + if (test_bit(wlvif->role_id, wl->roc_map)) + wl12xx_croc(wl, wlvif->role_id); + ret = wl12xx_cmd_role_stop_ap(wl, wlvif); if (ret < 0) goto out; @@ -4656,29 +4707,49 @@ static void wlcore_roc_if_possible(struct wl1271 *wl, wl12xx_roc(wl, wlvif, wlvif->role_id, wlvif->band, wlvif->channel); } -static void wlcore_update_inconn_sta(struct wl1271 *wl, - struct wl12xx_vif *wlvif, - struct wl1271_station *wl_sta, - bool in_connection) +/* + * when wl_sta is NULL, we treat this call as if coming from a + * pending auth reply. + * wl->mutex must be taken and the FW must be awake when the call + * takes place. + */ +void wlcore_update_inconn_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct wl1271_station *wl_sta, bool in_conn) { - if (in_connection) { - if (WARN_ON(wl_sta->in_connection)) + if (in_conn) { + if (WARN_ON(wl_sta && wl_sta->in_connection)) return; - wl_sta->in_connection = true; - if (!wlvif->inconn_count++) + + if (!wlvif->ap_pending_auth_reply && + !wlvif->inconn_count) wlcore_roc_if_possible(wl, wlvif); + + if (wl_sta) { + wl_sta->in_connection = true; + wlvif->inconn_count++; + } else { + wlvif->ap_pending_auth_reply = true; + } } else { - if (!wl_sta->in_connection) + if (wl_sta && !wl_sta->in_connection) + return; + + if (WARN_ON(!wl_sta && !wlvif->ap_pending_auth_reply)) return; - wl_sta->in_connection = false; - wlvif->inconn_count--; - if (WARN_ON(wlvif->inconn_count < 0)) + if (WARN_ON(wl_sta && !wlvif->inconn_count)) return; - if (!wlvif->inconn_count) - if (test_bit(wlvif->role_id, wl->roc_map)) - wl12xx_croc(wl, wlvif->role_id); + if (wl_sta) { + wl_sta->in_connection = false; + wlvif->inconn_count--; + } else { + wlvif->ap_pending_auth_reply = false; + } + + if (!wlvif->inconn_count && !wlvif->ap_pending_auth_reply && + test_bit(wlvif->role_id, wl->roc_map)) + wl12xx_croc(wl, wlvif->role_id); } } diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 7e93fe6..03249da 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -86,19 +86,34 @@ void wl1271_free_tx_id(struct wl1271 *wl, int id) EXPORT_SYMBOL(wl1271_free_tx_id); static void wl1271_tx_ap_update_inconnection_sta(struct wl1271 *wl, + struct wl12xx_vif *wlvif, struct sk_buff *skb) { struct ieee80211_hdr *hdr; + hdr = (struct ieee80211_hdr *)(skb->data + + sizeof(struct wl1271_tx_hw_descr)); + if (!ieee80211_is_auth(hdr->frame_control)) + return; + /* * add the station to the known list before transmitting the * authentication response. this way it won't get de-authed by FW * when transmitting too soon. */ - hdr = (struct ieee80211_hdr *)(skb->data + - sizeof(struct wl1271_tx_hw_descr)); - if (ieee80211_is_auth(hdr->frame_control)) - wl1271_acx_set_inconnection_sta(wl, hdr->addr1); + wl1271_acx_set_inconnection_sta(wl, hdr->addr1); + + /* + * ROC for 1 second on the AP channel for completing the connection. + * Note the ROC will be continued by the update_sta_state callbacks + * once the station reaches the associated state. + */ + wlcore_update_inconn_sta(wl, wlvif, NULL, true); + wlvif->pending_auth_reply_time = jiffies; + cancel_delayed_work(&wlvif->pending_auth_complete_work); + ieee80211_queue_delayed_work(wl->hw, + &wlvif->pending_auth_complete_work, + msecs_to_jiffies(WLCORE_PEND_AUTH_ROC_TIMEOUT)); } static void wl1271_tx_regulate_link(struct wl1271 *wl, @@ -404,7 +419,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif, wl1271_tx_fill_hdr(wl, wlvif, skb, extra, info, hlid); if (!is_dummy && wlvif && wlvif->bss_type == BSS_TYPE_AP_BSS) { - wl1271_tx_ap_update_inconnection_sta(wl, skb); + wl1271_tx_ap_update_inconnection_sta(wl, wlvif, skb); wl1271_tx_regulate_link(wl, wlvif, hlid); } diff --git a/drivers/net/wireless/ti/wlcore/tx.h b/drivers/net/wireless/ti/wlcore/tx.h index 55aa4ac..35489c3 100644 --- a/drivers/net/wireless/ti/wlcore/tx.h +++ b/drivers/net/wireless/ti/wlcore/tx.h @@ -56,6 +56,9 @@ /* Used for management frames and dummy packets */ #define WL1271_TID_MGMT 7 +/* stop a ROC for pending authentication reply after this time (ms) */ +#define WLCORE_PEND_AUTH_ROC_TIMEOUT 1000 + struct wl127x_tx_mem { /* * Number of extra memory blocks to allocate for this packet diff --git a/drivers/net/wireless/ti/wlcore/wlcore.h b/drivers/net/wireless/ti/wlcore/wlcore.h index 0034979..54ce5d5 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore.h +++ b/drivers/net/wireless/ti/wlcore/wlcore.h @@ -481,6 +481,8 @@ int wlcore_set_key(struct wl1271 *wl, enum set_key_cmd cmd, struct ieee80211_sta *sta, struct ieee80211_key_conf *key_conf); void wlcore_regdomain_config(struct wl1271 *wl); +void wlcore_update_inconn_sta(struct wl1271 *wl, struct wl12xx_vif *wlvif, + struct wl1271_station *wl_sta, bool in_conn); static inline void wlcore_set_ht_cap(struct wl1271 *wl, enum ieee80211_band band, diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index e5e1464..14fd111 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -456,6 +456,15 @@ struct wl12xx_vif { */ int hw_queue_base; + /* do we have a pending auth reply? (and ROC) */ + bool ap_pending_auth_reply; + + /* time when we sent the pending auth reply */ + unsigned long pending_auth_reply_time; + + /* work for canceling ROC after pending auth reply */ + struct delayed_work pending_auth_complete_work; + /* * This struct must be last! * data that has to be saved acrossed reconfigs (e.g. recovery) -- cgit v0.10.2 From dd491ffbaad83ccd6c99851a3c2d4b1ed75211fc Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Tue, 17 Sep 2013 18:41:21 +0300 Subject: wlcore: add new plt power-mode: CHIP_AWAKE Under this mode the chip is powered on including sdio but no FW is downloaded and run, interrupts are not enabled, etc... This mode is intended to allow RTTT to bridge sdio as a transport to the chip. Driver only provides sdio access using the dev_mem debugfs file. Some fixes done to the code that ensures that PLT mode and normal driver power mode (ifconfig/add_interface) are mutually excluded. Signed-off-by: Yair Shapira Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 3c7b8a4..7a1a435 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -1062,7 +1062,8 @@ int wl1271_plt_start(struct wl1271 *wl, const enum plt_mode plt_mode) static const char* const PLT_MODE[] = { "PLT_OFF", "PLT_ON", - "PLT_FEM_DETECT" + "PLT_FEM_DETECT", + "PLT_CHIP_AWAKE" }; int ret; @@ -1088,9 +1089,11 @@ int wl1271_plt_start(struct wl1271 *wl, const enum plt_mode plt_mode) if (ret < 0) goto power_off; - ret = wl->ops->plt_init(wl); - if (ret < 0) - goto power_off; + if (plt_mode != PLT_CHIP_AWAKE) { + ret = wl->ops->plt_init(wl); + if (ret < 0) + goto power_off; + } wl->state = WLCORE_STATE_ON; wl1271_notice("firmware booted in PLT mode %s (%s)", @@ -2419,6 +2422,11 @@ static int wl1271_op_add_interface(struct ieee80211_hw *hw, int ret = 0; u8 role_type; + if (wl->plt) { + wl1271_error("Adding Interface not allowed while in PLT mode"); + return -EBUSY; + } + vif->driver_flags |= IEEE80211_VIF_BEACON_FILTER | IEEE80211_VIF_SUPPORTS_CQM_RSSI; diff --git a/drivers/net/wireless/ti/wlcore/testmode.c b/drivers/net/wireless/ti/wlcore/testmode.c index 527590f..a3b7d95 100644 --- a/drivers/net/wireless/ti/wlcore/testmode.c +++ b/drivers/net/wireless/ti/wlcore/testmode.c @@ -297,7 +297,8 @@ static int wl1271_tm_cmd_set_plt_mode(struct wl1271 *wl, struct nlattr *tb[]) ret = wl1271_plt_stop(wl); break; case PLT_ON: - ret = wl1271_plt_start(wl, PLT_ON); + case PLT_CHIP_AWAKE: + ret = wl1271_plt_start(wl, val); break; case PLT_FEM_DETECT: ret = wl1271_tm_detect_fem(wl, tb); @@ -361,6 +362,7 @@ int wl1271_tm_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif, { struct wl1271 *wl = hw->priv; struct nlattr *tb[WL1271_TM_ATTR_MAX + 1]; + u32 nla_cmd; int err; err = nla_parse(tb, WL1271_TM_ATTR_MAX, data, len, wl1271_tm_policy); @@ -370,7 +372,14 @@ int wl1271_tm_cmd(struct ieee80211_hw *hw, struct ieee80211_vif *vif, if (!tb[WL1271_TM_ATTR_CMD_ID]) return -EINVAL; - switch (nla_get_u32(tb[WL1271_TM_ATTR_CMD_ID])) { + nla_cmd = nla_get_u32(tb[WL1271_TM_ATTR_CMD_ID]); + + /* Only SET_PLT_MODE is allowed in case of mode PLT_CHIP_AWAKE */ + if (wl->plt_mode == PLT_CHIP_AWAKE && + nla_cmd != WL1271_TM_CMD_SET_PLT_MODE) + return -EOPNOTSUPP; + + switch (nla_cmd) { case WL1271_TM_CMD_TEST: return wl1271_tm_cmd_test(wl, tb); case WL1271_TM_CMD_INTERROGATE: diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 14fd111..3f4f08b 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -307,6 +307,7 @@ enum plt_mode { PLT_OFF = 0, PLT_ON = 1, PLT_FEM_DETECT = 2, + PLT_CHIP_AWAKE = 3 }; struct wl12xx_rx_filter_field { -- cgit v0.10.2 From e7441ce48156572cb81efe1781aac6c7eb1c5323 Mon Sep 17 00:00:00 2001 From: Yair Shapira Date: Tue, 17 Sep 2013 18:41:22 +0300 Subject: wlcore: disable elp sleep while in plt mode We now disable elp sleep during plt mode to allow normal operation of plt tools such as calibrator. Having elp_sleep enabled during plt mode is actually not required and in fact it disrupt plt operations such as rx statistics etc. Signed-off-by: Yair Shapira Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/ps.c b/drivers/net/wireless/ti/wlcore/ps.c index 98066d4..26bfc36 100644 --- a/drivers/net/wireless/ti/wlcore/ps.c +++ b/drivers/net/wireless/ti/wlcore/ps.c @@ -83,6 +83,10 @@ void wl1271_ps_elp_sleep(struct wl1271 *wl) struct wl12xx_vif *wlvif; u32 timeout; + /* We do not enter elp sleep in PLT mode */ + if (wl->plt) + return; + if (wl->sleep_auth != WL1271_PSM_ELP) return; -- cgit v0.10.2 From b0ed8a4d39c9be5ce2a73970502b03b125971142 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 17 Sep 2013 18:41:23 +0300 Subject: wlcore: re-enable idle handling We need some stuff done on idle change, most notably we have to stop sched-scanning. Take care of this by reintroducing idle handling. Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 7a1a435..131e60f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -2927,6 +2927,25 @@ static void wl1271_set_band_rate(struct wl1271 *wl, struct wl12xx_vif *wlvif) wlvif->rate_set = wlvif->basic_rate_set; } +static void wl1271_sta_handle_idle(struct wl1271 *wl, struct wl12xx_vif *wlvif, + bool idle) +{ + bool cur_idle = !test_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags); + + if (idle == cur_idle) + return; + + if (idle) { + clear_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags); + } else { + /* The current firmware only supports sched_scan in idle */ + if (wl->sched_vif == wlvif) + wl->ops->sched_scan_stop(wl, wlvif); + + set_bit(WLVIF_FLAG_ACTIVE, &wlvif->flags); + } +} + static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif, struct ieee80211_conf *conf, u32 changed) { @@ -4179,6 +4198,9 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl, do_join = true; } + if (changed & BSS_CHANGED_IDLE && !is_ibss) + wl1271_sta_handle_idle(wl, wlvif, bss_conf->idle); + if (changed & BSS_CHANGED_CQM) { bool enable = false; if (bss_conf->cqm_rssi_thold) diff --git a/drivers/net/wireless/ti/wlcore/wlcore_i.h b/drivers/net/wireless/ti/wlcore/wlcore_i.h index 3f4f08b..2a50e08 100644 --- a/drivers/net/wireless/ti/wlcore/wlcore_i.h +++ b/drivers/net/wireless/ti/wlcore/wlcore_i.h @@ -255,6 +255,7 @@ enum wl12xx_vif_flags { WLVIF_FLAG_CS_PROGRESS, WLVIF_FLAG_AP_PROBE_RESP_SET, WLVIF_FLAG_IN_USE, + WLVIF_FLAG_ACTIVE, }; struct wl12xx_vif; -- cgit v0.10.2 From 0fe72086afcb3fa685ff8bfa8c975d826b245f25 Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Tue, 17 Sep 2013 18:41:24 +0300 Subject: wlcore: cleanup scan debug prints Remove scan debug dumps which are rarely used. Make scan debug prints more clear and short. Signed-off-by: Victor Goldenshtein Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index c9e0607..e3ae425 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -1126,6 +1126,8 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, u16 template_id_2_4 = wl->scan_templ_id_2_4; u16 template_id_5 = wl->scan_templ_id_5; + wl1271_debug(DEBUG_SCAN, "build probe request band %d", band); + skb = ieee80211_probereq_get(wl->hw, vif, ssid, ssid_len, ie_len); if (!skb) { @@ -1135,8 +1137,6 @@ int wl12xx_cmd_build_probe_req(struct wl1271 *wl, struct wl12xx_vif *wlvif, if (ie_len) memcpy(skb_put(skb, ie_len), ie, ie_len); - wl1271_dump(DEBUG_SCAN, "PROBE REQ: ", skb->data, skb->len); - if (sched_scan && (wl->quirks & WLCORE_QUIRK_DUAL_PROBE_TMPL)) { template_id_2_4 = wl->sched_scan_templ_id_2_4; @@ -1172,7 +1172,7 @@ struct sk_buff *wl1271_cmd_build_ap_probe_req(struct wl1271 *wl, if (!skb) goto out; - wl1271_dump(DEBUG_SCAN, "AP PROBE REQ: ", skb->data, skb->len); + wl1271_debug(DEBUG_SCAN, "set ap probe request template"); rate = wl1271_tx_min_rate_get(wl, wlvif->bitrate_masks[wlvif->band]); if (wlvif->band == IEEE80211_BAND_2GHZ) diff --git a/drivers/net/wireless/ti/wlcore/scan.c b/drivers/net/wireless/ti/wlcore/scan.c index f407101..13e743d 100644 --- a/drivers/net/wireless/ti/wlcore/scan.c +++ b/drivers/net/wireless/ti/wlcore/scan.c @@ -174,17 +174,7 @@ wlcore_scan_get_channels(struct wl1271 *wl, /* if radar is set, we ignore the passive flag */ (radar || !!(flags & IEEE80211_CHAN_PASSIVE_SCAN) == passive)) { - wl1271_debug(DEBUG_SCAN, "band %d, center_freq %d ", - req_channels[i]->band, - req_channels[i]->center_freq); - wl1271_debug(DEBUG_SCAN, "hw_value %d, flags %X", - req_channels[i]->hw_value, - req_channels[i]->flags); - wl1271_debug(DEBUG_SCAN, "max_power %d", - req_channels[i]->max_power); - wl1271_debug(DEBUG_SCAN, "min_dwell_time %d max dwell time %d", - min_dwell_time_active, - max_dwell_time_active); + if (flags & IEEE80211_CHAN_RADAR) { channels[j].flags |= SCAN_CHANNEL_FLAGS_DFS; @@ -222,6 +212,17 @@ wlcore_scan_get_channels(struct wl1271 *wl, *n_pactive_ch); } + wl1271_debug(DEBUG_SCAN, "freq %d, ch. %d, flags 0x%x, power %d, min/max_dwell %d/%d%s%s", + req_channels[i]->center_freq, + req_channels[i]->hw_value, + req_channels[i]->flags, + req_channels[i]->max_power, + min_dwell_time_active, + max_dwell_time_active, + flags & IEEE80211_CHAN_RADAR ? + ", DFS" : "", + flags & IEEE80211_CHAN_PASSIVE_SCAN ? + ", PASSIVE" : ""); j++; } } @@ -364,7 +365,7 @@ wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, struct cfg80211_ssid *ssids = req->ssids; int ret = 0, type, i, j, n_match_ssids = 0; - wl1271_debug(DEBUG_CMD, "cmd sched scan ssid list"); + wl1271_debug((DEBUG_CMD | DEBUG_SCAN), "cmd sched scan ssid list"); /* count the match sets that contain SSIDs */ for (i = 0; i < req->n_match_sets; i++) @@ -442,8 +443,6 @@ wlcore_scan_sched_scan_ssid_list(struct wl1271 *wl, } } - wl1271_dump(DEBUG_SCAN, "SSID_LIST: ", cmd, sizeof(*cmd)); - ret = wl1271_cmd_send(wl, CMD_CONNECTION_SCAN_SSID_CFG, cmd, sizeof(*cmd), 0); if (ret < 0) { -- cgit v0.10.2 From bf9d5d28aabc6e420a0b6fb3a24b93046878e864 Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Tue, 17 Sep 2013 18:41:25 +0300 Subject: wlcore: fix unsafe dereference of the wlvif wlvif could be passed as NULL from the wlcore_tx_work_locked() to the wl1271_prepare_tx_frame() and to wl1271_skb_queue_head() functions. This may lead to a Kernel panic, fix this by validating that wlvif != NULL. Signed-off-by: Victor Goldenshtein Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/tx.c b/drivers/net/wireless/ti/wlcore/tx.c index 03249da..87cd707 100644 --- a/drivers/net/wireless/ti/wlcore/tx.c +++ b/drivers/net/wireless/ti/wlcore/tx.c @@ -401,7 +401,7 @@ static int wl1271_prepare_tx_frame(struct wl1271 *wl, struct wl12xx_vif *wlvif, is_wep = (cipher == WLAN_CIPHER_SUITE_WEP40) || (cipher == WLAN_CIPHER_SUITE_WEP104); - if (WARN_ON(is_wep && wlvif->default_key != idx)) { + if (WARN_ON(is_wep && wlvif && wlvif->default_key != idx)) { ret = wl1271_set_default_wep_key(wl, wlvif, idx); if (ret < 0) return ret; -- cgit v0.10.2 From 7ca38a98ca4b1c5e0d243a712d9eb84afdfe2747 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 17 Sep 2013 18:41:26 +0300 Subject: wlcore: remove unsupported channels The fw doesn't support channels 7,9,11 in 5ghz band, so don't advertise supporting them. Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 131e60f..d8d006f 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5414,10 +5414,7 @@ static struct ieee80211_rate wl1271_rates_5ghz[] = { /* 5 GHz band channels for WL1273 */ static struct ieee80211_channel wl1271_channels_5ghz[] = { - { .hw_value = 7, .center_freq = 5035, .max_power = WLCORE_MAX_TXPWR }, { .hw_value = 8, .center_freq = 5040, .max_power = WLCORE_MAX_TXPWR }, - { .hw_value = 9, .center_freq = 5045, .max_power = WLCORE_MAX_TXPWR }, - { .hw_value = 11, .center_freq = 5055, .max_power = WLCORE_MAX_TXPWR }, { .hw_value = 12, .center_freq = 5060, .max_power = WLCORE_MAX_TXPWR }, { .hw_value = 16, .center_freq = 5080, .max_power = WLCORE_MAX_TXPWR }, { .hw_value = 34, .center_freq = 5170, .max_power = WLCORE_MAX_TXPWR }, -- cgit v0.10.2 From 49540d1b8155b5ded98e6b77c5c92b11854c3de7 Mon Sep 17 00:00:00 2001 From: Eliad Peller Date: Tue, 17 Sep 2013 18:41:27 +0300 Subject: wlcore: clarify and fix regulatory domain bit translation Channels 52-64 were mapped incorrectly. Refactor and document wlcore_get_reg_conf_ch_idx() in order to make it clear what's going on there. While on it, fix the return value check to consider 0 as a valid return value as well (indicates channel 1). Reported-by: Yaniv Machani Signed-off-by: Eliad Peller Signed-off-by: Ido Reis Signed-off-by: Victor Goldenshtein Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/cmd.c b/drivers/net/wireless/ti/wlcore/cmd.c index e3ae425..9e5416f8 100644 --- a/drivers/net/wireless/ti/wlcore/cmd.c +++ b/drivers/net/wireless/ti/wlcore/cmd.c @@ -1607,33 +1607,43 @@ out: static int wlcore_get_reg_conf_ch_idx(enum ieee80211_band band, u16 ch) { - int idx = -1; - + /* + * map the given band/channel to the respective predefined + * bit expected by the fw + */ switch (band) { - case IEEE80211_BAND_5GHZ: - if (ch >= 8 && ch <= 16) - idx = ((ch-8)/4 + 18); - else if (ch >= 34 && ch <= 64) - idx = ((ch-34)/2 + 3 + 18); - else if (ch >= 100 && ch <= 140) - idx = ((ch-100)/4 + 15 + 18); - else if (ch >= 149 && ch <= 165) - idx = ((ch-149)/4 + 26 + 18); - else - idx = -1; - break; case IEEE80211_BAND_2GHZ: + /* channels 1..14 are mapped to 0..13 */ if (ch >= 1 && ch <= 14) - idx = ch - 1; - else - idx = -1; + return ch - 1; + break; + case IEEE80211_BAND_5GHZ: + switch (ch) { + case 8 ... 16: + /* channels 8,12,16 are mapped to 18,19,20 */ + return 18 + (ch-8)/4; + case 34 ... 48: + /* channels 34,36..48 are mapped to 21..28 */ + return 21 + (ch-34)/2; + case 52 ... 64: + /* channels 52,56..64 are mapped to 29..32 */ + return 29 + (ch-52)/4; + case 100 ... 140: + /* channels 100,104..140 are mapped to 33..43 */ + return 33 + (ch-100)/4; + case 149 ... 165: + /* channels 149,153..165 are mapped to 44..48 */ + return 44 + (ch-149)/4; + default: + break; + } break; default: - wl1271_error("get reg conf ch idx - unknown band: %d", - (int)band); + break; } - return idx; + wl1271_error("%s: unknown band/channel: %d/%d", __func__, band, ch); + return -1; } void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel, @@ -1646,7 +1656,7 @@ void wlcore_set_pending_regdomain_ch(struct wl1271 *wl, u16 channel, ch_bit_idx = wlcore_get_reg_conf_ch_idx(band, channel); - if (ch_bit_idx > 0 && ch_bit_idx <= WL1271_MAX_CHANNELS) + if (ch_bit_idx >= 0 && ch_bit_idx <= WL1271_MAX_CHANNELS) set_bit(ch_bit_idx, (long *)wl->reg_ch_conf_pending); } -- cgit v0.10.2 From ef47d3287ca693067e3891aad9c8e62671579592 Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Tue, 17 Sep 2013 18:41:28 +0300 Subject: wl18xx: fix boot process in high temperature environment In addition to existing WCS PLL configuration add and enable also the coex PLL during init phase. This fixes boot failures due to silicon latchup in high temperature environment (>85c). Signed-off-by: Victor Goldenshtein Signed-off-by: Nadim Zubidat Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index 7aa0eb8..b47eb62 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -623,6 +623,18 @@ static const int wl18xx_rtable[REG_TABLE_LEN] = { [REG_RAW_FW_STATUS_ADDR] = WL18XX_FW_STATUS_ADDR, }; +static const struct wl18xx_clk_cfg wl18xx_clk_table_coex[NUM_CLOCK_CONFIGS] = { + [CLOCK_CONFIG_16_2_M] = { 8, 121, 0, 0, false }, + [CLOCK_CONFIG_16_368_M] = { 8, 120, 0, 0, false }, + [CLOCK_CONFIG_16_8_M] = { 8, 117, 0, 0, false }, + [CLOCK_CONFIG_19_2_M] = { 10, 128, 0, 0, false }, + [CLOCK_CONFIG_26_M] = { 11, 104, 0, 0, false }, + [CLOCK_CONFIG_32_736_M] = { 8, 120, 0, 0, false }, + [CLOCK_CONFIG_33_6_M] = { 8, 117, 0, 0, false }, + [CLOCK_CONFIG_38_468_M] = { 10, 128, 0, 0, false }, + [CLOCK_CONFIG_52_M] = { 11, 104, 0, 0, false }, +}; + static const struct wl18xx_clk_cfg wl18xx_clk_table[NUM_CLOCK_CONFIGS] = { [CLOCK_CONFIG_16_2_M] = { 7, 104, 801, 4, true }, [CLOCK_CONFIG_16_368_M] = { 9, 132, 3751, 4, true }, @@ -704,6 +716,23 @@ static int wl18xx_set_clk(struct wl1271 *wl) wl18xx_clk_table[clk_freq].p, wl18xx_clk_table[clk_freq].q, wl18xx_clk_table[clk_freq].swallow ? "swallow" : "spit"); + /* coex PLL configuration */ + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_N, + wl18xx_clk_table_coex[clk_freq].n); + if (ret < 0) + goto out; + + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_M, + wl18xx_clk_table_coex[clk_freq].m); + if (ret < 0) + goto out; + + /* bypass the swallowing logic */ + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN, + PLLSH_COEX_PLL_SWALLOW_EN_VAL1); + if (ret < 0) + goto out; + ret = wl18xx_top_reg_write(wl, PLLSH_WCS_PLL_N, wl18xx_clk_table[clk_freq].n); if (ret < 0) @@ -745,6 +774,30 @@ static int wl18xx_set_clk(struct wl1271 *wl) PLLSH_WCS_PLL_SWALLOW_EN_VAL2); } + /* choose WCS PLL */ + ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_SEL, + PLLSH_WL_PLL_SEL_WCS_PLL); + if (ret < 0) + goto out; + + /* enable both PLLs */ + ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL1); + if (ret < 0) + goto out; + + udelay(1000); + + /* disable coex PLL */ + ret = wl18xx_top_reg_write(wl, PLLSH_WL_PLL_EN, PLLSH_WL_PLL_EN_VAL2); + if (ret < 0) + goto out; + + /* reset the swallowing logic */ + ret = wl18xx_top_reg_write(wl, PLLSH_COEX_PLL_SWALLOW_EN, + PLLSH_COEX_PLL_SWALLOW_EN_VAL2); + if (ret < 0) + goto out; + out: return ret; } diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h index 05dd8ba..88de3f2 100644 --- a/drivers/net/wireless/ti/wl18xx/reg.h +++ b/drivers/net/wireless/ti/wl18xx/reg.h @@ -114,6 +114,11 @@ #define PLATFORM_DETECTION 0xA0E3E0 #define OCS_EN 0xA02080 #define PRIMARY_CLK_DETECT 0xA020A6 +#define PLLSH_COEX_PLL_N 0xA02384 +#define PLLSH_COEX_PLL_M 0xA02382 +#define PLLSH_COEX_PLL_SWALLOW_EN 0xA0238E +#define PLLSH_WL_PLL_SEL 0xA02398 + #define PLLSH_WCS_PLL_N 0xA02362 #define PLLSH_WCS_PLL_M 0xA02360 #define PLLSH_WCS_PLL_Q_FACTOR_CFG_1 0xA02364 @@ -128,9 +133,17 @@ #define PLLSH_WCS_PLL_P_FACTOR_CFG_1_MASK 0xFFFF #define PLLSH_WCS_PLL_P_FACTOR_CFG_2_MASK 0x000F +#define PLLSH_WL_PLL_EN_VAL1 0x7 +#define PLLSH_WL_PLL_EN_VAL2 0x2 +#define PLLSH_COEX_PLL_SWALLOW_EN_VAL1 0x2 +#define PLLSH_COEX_PLL_SWALLOW_EN_VAL2 0x11 + #define PLLSH_WCS_PLL_SWALLOW_EN_VAL1 0x1 #define PLLSH_WCS_PLL_SWALLOW_EN_VAL2 0x12 +#define PLLSH_WL_PLL_SEL_WCS_PLL 0x0 +#define PLLSH_WL_PLL_SEL_COEX_PLL 0x1 + #define WL18XX_REG_FUSE_DATA_1_3 0xA0260C #define WL18XX_PG_VER_MASK 0x70 #define WL18XX_PG_VER_OFFSET 4 -- cgit v0.10.2 From 1f8a1890ed2be9c1e5cfc243426089d0531f5bde Mon Sep 17 00:00:00 2001 From: Victor Goldenshtein Date: Tue, 17 Sep 2013 18:41:29 +0300 Subject: wl18xx: print new RDL versions during boot Extract and print info for the new RDL 5, 6, 7 and 8. Replace const struct with function which translates the RDL number to string. Signed-off-by: Victor Goldenshtein Signed-off-by: Barak Bercovitz Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index b47eb62..d0daca1 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1228,16 +1228,48 @@ static u32 wl18xx_ap_get_mimo_wide_rate_mask(struct wl1271 *wl, } } +static const char *wl18xx_rdl_name(enum wl18xx_rdl_num rdl_num) +{ + switch (rdl_num) { + case RDL_1_HP: + return "183xH"; + case RDL_2_SP: + return "183x or 180x"; + case RDL_3_HP: + return "187xH"; + case RDL_4_SP: + return "187x"; + case RDL_5_SP: + return "RDL11 - Not Supported"; + case RDL_6_SP: + return "180xD"; + case RDL_7_SP: + return "RDL13 - Not Supported (1893Q)"; + case RDL_8_SP: + return "18xxQ"; + case RDL_NONE: + return "UNTRIMMED"; + default: + return "UNKNOWN"; + } +} + static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver) { u32 fuse; - s8 rom = 0, metal = 0, pg_ver = 0, rdl_ver = 0; + s8 rom = 0, metal = 0, pg_ver = 0, rdl_ver = 0, package_type = 0; int ret; ret = wlcore_set_partition(wl, &wl->ptable[PART_TOP_PRCM_ELP_SOC]); if (ret < 0) goto out; + ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_2_3, &fuse); + if (ret < 0) + goto out; + + package_type = (fuse >> WL18XX_PACKAGE_TYPE_OFFSET) & 1; + ret = wlcore_read32(wl, WL18XX_REG_FUSE_DATA_1_3, &fuse); if (ret < 0) goto out; @@ -1245,7 +1277,7 @@ static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver) pg_ver = (fuse & WL18XX_PG_VER_MASK) >> WL18XX_PG_VER_OFFSET; rom = (fuse & WL18XX_ROM_VER_MASK) >> WL18XX_ROM_VER_OFFSET; - if (rom <= 0xE) + if ((rom <= 0xE) && (package_type == WL18XX_PACKAGE_TYPE_WSP)) metal = (fuse & WL18XX_METAL_VER_MASK) >> WL18XX_METAL_VER_OFFSET; else @@ -1257,11 +1289,9 @@ static int wl18xx_get_pg_ver(struct wl1271 *wl, s8 *ver) goto out; rdl_ver = (fuse & WL18XX_RDL_VER_MASK) >> WL18XX_RDL_VER_OFFSET; - if (rdl_ver > RDL_MAX) - rdl_ver = RDL_NONE; - wl1271_info("wl18xx HW: RDL %d, %s, PG %x.%x (ROM %x)", - rdl_ver, rdl_names[rdl_ver], pg_ver, metal, rom); + wl1271_info("wl18xx HW: %s, PG %d.%d (ROM 0x%x)", + wl18xx_rdl_name(rdl_ver), pg_ver, metal, rom); if (ver) *ver = pg_ver; diff --git a/drivers/net/wireless/ti/wl18xx/reg.h b/drivers/net/wireless/ti/wl18xx/reg.h index 88de3f2..a433a75 100644 --- a/drivers/net/wireless/ti/wl18xx/reg.h +++ b/drivers/net/wireless/ti/wl18xx/reg.h @@ -147,13 +147,16 @@ #define WL18XX_REG_FUSE_DATA_1_3 0xA0260C #define WL18XX_PG_VER_MASK 0x70 #define WL18XX_PG_VER_OFFSET 4 -#define WL18XX_ROM_VER_MASK 0x3 -#define WL18XX_ROM_VER_OFFSET 0 +#define WL18XX_ROM_VER_MASK 0x3e00 +#define WL18XX_ROM_VER_OFFSET 9 #define WL18XX_METAL_VER_MASK 0xC #define WL18XX_METAL_VER_OFFSET 2 #define WL18XX_NEW_METAL_VER_MASK 0x180 #define WL18XX_NEW_METAL_VER_OFFSET 7 +#define WL18XX_PACKAGE_TYPE_OFFSET 13 +#define WL18XX_PACKAGE_TYPE_WSP 0 + #define WL18XX_REG_FUSE_DATA_2_3 0xA02614 #define WL18XX_RDL_VER_MASK 0x1f00 #define WL18XX_RDL_VER_OFFSET 8 @@ -214,24 +217,21 @@ enum { NUM_BOARD_TYPES, }; -enum { +enum wl18xx_rdl_num { RDL_NONE = 0, RDL_1_HP = 1, RDL_2_SP = 2, RDL_3_HP = 3, RDL_4_SP = 4, + RDL_5_SP = 0x11, + RDL_6_SP = 0x12, + RDL_7_SP = 0x13, + RDL_8_SP = 0x14, _RDL_LAST, RDL_MAX = _RDL_LAST - 1, }; -static const char * const rdl_names[] = { - [RDL_NONE] = "", - [RDL_1_HP] = "1853 SISO", - [RDL_2_SP] = "1857 MIMO", - [RDL_3_HP] = "1893 SISO", - [RDL_4_SP] = "1897 MIMO", -}; /* FPGA_SPARE_1 register - used to change the PHY ATPG clock at boot time */ #define WL18XX_PHY_FPGA_SPARE_1 0x8093CA40 -- cgit v0.10.2 From f2cede49ae7b9f51a6fe97ada16c27e4d03d05a3 Mon Sep 17 00:00:00 2001 From: Arik Nemtsov Date: Tue, 17 Sep 2013 18:41:30 +0300 Subject: wlcore: always register dummy hardirq This keeps the kernel happy when using edge-irqs and requesting a threaded irq. Signed-off-by: Arik Nemtsov Signed-off-by: Eliad Peller Signed-off-by: Luciano Coelho diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index d8d006f..bbdd106 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5994,6 +5994,11 @@ static const struct wiphy_wowlan_support wlcore_wowlan_support = { }; #endif +static irqreturn_t wlcore_hardirq(int irq, void *cookie) +{ + return IRQ_WAKE_THREAD; +} + static void wlcore_nvs_cb(const struct firmware *fw, void *context) { struct wl1271 *wl = context; @@ -6002,6 +6007,7 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) struct wl12xx_platform_data *pdata = pdev_data->pdata; unsigned long irqflags; int ret; + irq_handler_t hardirq_fn = NULL; if (fw) { wl->nvs = kmemdup(fw->data, fw->size, GFP_KERNEL); @@ -6030,12 +6036,14 @@ static void wlcore_nvs_cb(const struct firmware *fw, void *context) wl->platform_quirks = pdata->platform_quirks; wl->if_ops = pdev_data->if_ops; - if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) + if (wl->platform_quirks & WL12XX_PLATFORM_QUIRK_EDGE_IRQ) { irqflags = IRQF_TRIGGER_RISING; - else + hardirq_fn = wlcore_hardirq; + } else { irqflags = IRQF_TRIGGER_HIGH | IRQF_ONESHOT; + } - ret = request_threaded_irq(wl->irq, NULL, wlcore_irq, + ret = request_threaded_irq(wl->irq, hardirq_fn, wlcore_irq, irqflags, pdev->name, wl); if (ret < 0) { wl1271_error("request_irq() failed: %d", ret); -- cgit v0.10.2 From 60f2a3ed7beb2e9b8f2c63de0895f587e0c1ca76 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 1 Oct 2013 22:59:20 -0700 Subject: Bluetooth: Use only 2 bits for controller type information The controller type is limited to BR/EDR/LE and AMP controllers. This can be easily encoded with just 2 bits and still leave enough room for future controller types. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 4549b5c..dd2528c5 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1610,7 +1610,7 @@ int hci_get_dev_info(void __user *arg) strcpy(di.name, hdev->name); di.bdaddr = hdev->bdaddr; - di.type = (hdev->bus & 0x0f) | (hdev->dev_type << 4); + di.type = (hdev->bus & 0x0f) | ((hdev->dev_type & 0x03) << 4); di.flags = hdev->flags; di.pkt_type = hdev->pkt_type; if (lmp_bredr_capable(hdev)) { -- cgit v0.10.2 From a59ac2f7447d8a4202f29ade1af785212d12b1d1 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 1 Oct 2013 22:59:21 -0700 Subject: Bluetooth: Replace BDADDR_LOCAL with BDADDR_NONE The BDADDR_LOCAL is a relict from userspace and has never been used within the kernel. So remove that constant and replace it with a new BDADDR_NONE that is similar to HCI_DEV_NONE with all bits set. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/include/net/bluetooth/bluetooth.h b/include/net/bluetooth/bluetooth.h index afbc711..5fd5106 100644 --- a/include/net/bluetooth/bluetooth.h +++ b/include/net/bluetooth/bluetooth.h @@ -197,8 +197,8 @@ static inline bool bdaddr_type_is_le(__u8 type) return false; } -#define BDADDR_ANY (&(bdaddr_t) {{0, 0, 0, 0, 0, 0} }) -#define BDADDR_LOCAL (&(bdaddr_t) {{0, 0, 0, 0xff, 0xff, 0xff} }) +#define BDADDR_ANY (&(bdaddr_t) {{0, 0, 0, 0, 0, 0}}) +#define BDADDR_NONE (&(bdaddr_t) {{0xff, 0xff, 0xff, 0xff, 0xff, 0xff}}) /* Copy, swap, convert BD Address */ static inline int bacmp(const bdaddr_t *ba1, const bdaddr_t *ba2) -- cgit v0.10.2 From 848566b381e72b07e41beffde677955ae1498153 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 1 Oct 2013 22:59:22 -0700 Subject: Bluetooth: Provide high speed configuration option Hiding the Bluetooth high speed support behind a module parameter is not really useful. This can be enabled and disabled at runtime via the management interface. This also has the advantage that this can now be changed per controller and not just global. This patch removes the module parameter and exposes the high speed setting of the management interface to all controllers. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h index 1a966af..f141b5f 100644 --- a/include/net/bluetooth/l2cap.h +++ b/include/net/bluetooth/l2cap.h @@ -564,6 +564,7 @@ struct l2cap_conn { __u32 feat_mask; __u8 fixed_chan_mask; + bool hs_enabled; __u8 info_state; __u8 info_ident; diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index dd2528c5..750c360 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1222,12 +1222,6 @@ int hci_dev_open(__u16 dev) ret = hdev->setup(hdev); if (!ret) { - /* Treat all non BR/EDR controllers as raw devices if - * enable_hs is not set. - */ - if (hdev->dev_type != HCI_BREDR && !enable_hs) - set_bit(HCI_RAW, &hdev->flags); - if (test_bit(HCI_QUIRK_RAW_DEVICE, &hdev->quirks)) set_bit(HCI_RAW, &hdev->flags); diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index d1f1e78..6d42498 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -1016,13 +1016,12 @@ static bool __amp_capable(struct l2cap_chan *chan) { struct l2cap_conn *conn = chan->conn; - if (enable_hs && - hci_amp_capable() && + if (conn->hs_enabled && hci_amp_capable() && chan->chan_policy == BT_CHANNEL_POLICY_AMP_PREFERRED && conn->fixed_chan_mask & L2CAP_FC_A2MP) return true; - else - return false; + + return false; } static bool l2cap_check_efs(struct l2cap_chan *chan) @@ -1638,6 +1637,10 @@ static struct l2cap_conn *l2cap_conn_add(struct hci_conn *hcon) conn->feat_mask = 0; + if (hcon->type == ACL_LINK) + conn->hs_enabled = test_bit(HCI_HS_ENABLED, + &hcon->hdev->dev_flags); + spin_lock_init(&conn->lock); mutex_init(&conn->chan_lock); @@ -3084,14 +3087,14 @@ static inline __u8 l2cap_select_mode(__u8 mode, __u16 remote_feat_mask) } } -static inline bool __l2cap_ews_supported(struct l2cap_chan *chan) +static inline bool __l2cap_ews_supported(struct l2cap_conn *conn) { - return enable_hs && chan->conn->feat_mask & L2CAP_FEAT_EXT_WINDOW; + return conn->hs_enabled && conn->feat_mask & L2CAP_FEAT_EXT_WINDOW; } -static inline bool __l2cap_efs_supported(struct l2cap_chan *chan) +static inline bool __l2cap_efs_supported(struct l2cap_conn *conn) { - return enable_hs && chan->conn->feat_mask & L2CAP_FEAT_EXT_FLOW; + return conn->hs_enabled && conn->feat_mask & L2CAP_FEAT_EXT_FLOW; } static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan, @@ -3135,7 +3138,7 @@ static void __l2cap_set_ertm_timeouts(struct l2cap_chan *chan, static inline void l2cap_txwin_setup(struct l2cap_chan *chan) { if (chan->tx_win > L2CAP_DEFAULT_TX_WINDOW && - __l2cap_ews_supported(chan)) { + __l2cap_ews_supported(chan->conn)) { /* use extended control field */ set_bit(FLAG_EXT_CTRL, &chan->flags); chan->tx_win_max = L2CAP_DEFAULT_EXT_WINDOW; @@ -3165,7 +3168,7 @@ static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data) if (test_bit(CONF_STATE2_DEVICE, &chan->conf_state)) break; - if (__l2cap_efs_supported(chan)) + if (__l2cap_efs_supported(chan->conn)) set_bit(FLAG_EFS_ENABLE, &chan->flags); /* fall through */ @@ -3317,7 +3320,7 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data) break; case L2CAP_CONF_EWS: - if (!enable_hs) + if (!chan->conn->hs_enabled) return -ECONNREFUSED; set_bit(FLAG_EXT_CTRL, &chan->flags); @@ -3349,7 +3352,7 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data) } if (remote_efs) { - if (__l2cap_efs_supported(chan)) + if (__l2cap_efs_supported(chan->conn)) set_bit(FLAG_EFS_ENABLE, &chan->flags); else return -ECONNREFUSED; @@ -4303,7 +4306,7 @@ static inline int l2cap_information_req(struct l2cap_conn *conn, if (!disable_ertm) feat_mask |= L2CAP_FEAT_ERTM | L2CAP_FEAT_STREAMING | L2CAP_FEAT_FCS; - if (enable_hs) + if (conn->hs_enabled) feat_mask |= L2CAP_FEAT_EXT_FLOW | L2CAP_FEAT_EXT_WINDOW; @@ -4314,7 +4317,7 @@ static inline int l2cap_information_req(struct l2cap_conn *conn, u8 buf[12]; struct l2cap_info_rsp *rsp = (struct l2cap_info_rsp *) buf; - if (enable_hs) + if (conn->hs_enabled) l2cap_fixed_chan[0] |= L2CAP_FC_A2MP; else l2cap_fixed_chan[0] &= ~L2CAP_FC_A2MP; @@ -4411,7 +4414,7 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn, if (cmd_len != sizeof(*req)) return -EPROTO; - if (!enable_hs) + if (!conn->hs_enabled) return -EINVAL; psm = le16_to_cpu(req->psm); @@ -4838,7 +4841,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn, BT_DBG("icid 0x%4.4x, dest_amp_id %d", icid, req->dest_amp_id); - if (!enable_hs) + if (!conn->hs_enabled) return -EINVAL; chan = l2cap_get_chan_by_dcid(conn, icid); diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c index c85537c..9119898 100644 --- a/net/bluetooth/l2cap_sock.c +++ b/net/bluetooth/l2cap_sock.c @@ -445,11 +445,6 @@ static int l2cap_sock_getsockopt(struct socket *sock, int level, int optname, break; case BT_CHANNEL_POLICY: - if (!enable_hs) { - err = -ENOPROTOOPT; - break; - } - if (put_user(chan->chan_policy, (u32 __user *) optval)) err = -EFAULT; break; @@ -720,11 +715,6 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, break; case BT_CHANNEL_POLICY: - if (!enable_hs) { - err = -ENOPROTOOPT; - break; - } - if (get_user(opt, (u32 __user *) optval)) { err = -EFAULT; break; diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 1b5b10f..dd15491 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -32,8 +32,6 @@ #include #include -bool enable_hs; - #define MGMT_VERSION 1 #define MGMT_REVISION 3 @@ -380,10 +378,8 @@ static u32 get_supported_settings(struct hci_dev *hdev) settings |= MGMT_SETTING_DISCOVERABLE; settings |= MGMT_SETTING_BREDR; settings |= MGMT_SETTING_LINK_SECURITY; - } - - if (enable_hs) settings |= MGMT_SETTING_HS; + } if (lmp_le_capable(hdev)) { settings |= MGMT_SETTING_LE; @@ -1344,7 +1340,7 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) BT_DBG("request for %s", hdev->name); - if (!enable_hs) + if (!lmp_bredr_capable(hdev)) return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, MGMT_STATUS_NOT_SUPPORTED); @@ -4396,6 +4392,3 @@ int mgmt_device_unblocked(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 type) return mgmt_event(MGMT_EV_DEVICE_UNBLOCKED, hdev, &ev, sizeof(ev), cmd ? cmd->sk : NULL); } - -module_param(enable_hs, bool, 0644); -MODULE_PARM_DESC(enable_hs, "Enable High Speed support"); -- cgit v0.10.2 From ee39269369eaada5daae7fabb69bc03429e23bc7 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 1 Oct 2013 22:59:23 -0700 Subject: Bluetooth: Send new settings event when changing high speed option When enabling or disabling high speed setting it is required to send a new settings event to inform other management interface users about the changed settings. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index dd15491..ad38629 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1337,6 +1337,8 @@ failed: static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_mode *cp = data; + bool changed; + int err; BT_DBG("request for %s", hdev->name); @@ -1348,12 +1350,23 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, MGMT_STATUS_INVALID_PARAMS); + hci_dev_lock(hdev); + if (cp->val) - set_bit(HCI_HS_ENABLED, &hdev->dev_flags); + changed = !test_and_set_bit(HCI_HS_ENABLED, &hdev->dev_flags); else - clear_bit(HCI_HS_ENABLED, &hdev->dev_flags); + changed = test_and_clear_bit(HCI_HS_ENABLED, &hdev->dev_flags); + + err = send_settings_rsp(sk, MGMT_OP_SET_HS, hdev); + if (err < 0) + goto unlock; - return send_settings_rsp(sk, MGMT_OP_SET_HS, hdev); + if (changed) + err = new_settings(hdev, sk); + +unlock: + hci_dev_unlock(hdev); + return err; } static void le_enable_complete(struct hci_dev *hdev, u8 status) -- cgit v0.10.2 From 10a8b86f575235258bdf195e4503f2c2ddfd2e26 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 1 Oct 2013 22:59:24 -0700 Subject: Bluetooth: Require CAP_NET_ADMIN for HCI User Channel operation The HCI User Channel operation is an admin operation that puts the device into promiscuous mode for single use. It is more suitable to require CAP_NET_ADMIN than CAP_NET_RAW. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/hci_sock.c b/net/bluetooth/hci_sock.c index c09e976..5798861 100644 --- a/net/bluetooth/hci_sock.c +++ b/net/bluetooth/hci_sock.c @@ -687,7 +687,7 @@ static int hci_sock_bind(struct socket *sock, struct sockaddr *addr, goto done; } - if (!capable(CAP_NET_RAW)) { + if (!capable(CAP_NET_ADMIN)) { err = -EPERM; goto done; } -- cgit v0.10.2 From 922ca1dfc2127a5dc363e8c1e6c8a33c5a0a14c6 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Tue, 1 Oct 2013 22:59:25 -0700 Subject: Bluetooth: Enable -D__CHECK_ENDIAN__ for sparse by default The Bluetooth protocol and hardware is pretty much all little endian and so when running sparse via "make C=2" for example, enable the endian checks by default. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile index 4afae20..9fe8a87 100644 --- a/drivers/bluetooth/Makefile +++ b/drivers/bluetooth/Makefile @@ -30,3 +30,5 @@ hci_uart-$(CONFIG_BT_HCIUART_LL) += hci_ll.o hci_uart-$(CONFIG_BT_HCIUART_ATH3K) += hci_ath.o hci_uart-$(CONFIG_BT_HCIUART_3WIRE) += hci_h5.o hci_uart-objs := $(hci_uart-y) + +ccflags-y += -D__CHECK_ENDIAN__ diff --git a/net/bluetooth/Makefile b/net/bluetooth/Makefile index dea6a28..6a791e7 100644 --- a/net/bluetooth/Makefile +++ b/net/bluetooth/Makefile @@ -11,3 +11,5 @@ obj-$(CONFIG_BT_HIDP) += hidp/ bluetooth-y := af_bluetooth.o hci_core.o hci_conn.o hci_event.o mgmt.o \ hci_sock.o hci_sysfs.o l2cap_core.o l2cap_sock.o smp.o sco.o lib.o \ a2mp.o amp.o + +subdir-ccflags-y += -D__CHECK_ENDIAN__ -- cgit v0.10.2 From cbed0ca137ef442c545602a09030bbb35d8db013 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 1 Oct 2013 22:44:49 +0300 Subject: Bluetooth: Refactor hci_dev_open to a separate hci_dev_do_open function The requirements of an external call to hci_dev_open from hci_sock.c are different to that from within hci_core.c. In the former case we want to flush any pending work in hdev->req_workqueue whereas in the latter we don't (since there we are already calling from within the workqueue itself). This patch does the necessary refactoring to a separate hci_dev_do_open function (analogous to hci_dev_do_close) but does not yet introduce the synchronizations relating to the workqueue usage. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 750c360..1bc4324 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1176,17 +1176,10 @@ void hci_update_ad(struct hci_request *req) hci_req_add(req, HCI_OP_LE_SET_ADV_DATA, sizeof(cp), &cp); } -/* ---- HCI ioctl helpers ---- */ - -int hci_dev_open(__u16 dev) +static int hci_dev_do_open(struct hci_dev *hdev) { - struct hci_dev *hdev; int ret = 0; - hdev = hci_dev_get(dev); - if (!hdev) - return -ENODEV; - BT_DBG("%s %p", hdev->name, hdev); hci_req_lock(hdev); @@ -1266,10 +1259,27 @@ int hci_dev_open(__u16 dev) done: hci_req_unlock(hdev); - hci_dev_put(hdev); return ret; } +/* ---- HCI ioctl helpers ---- */ + +int hci_dev_open(__u16 dev) +{ + struct hci_dev *hdev; + int err; + + hdev = hci_dev_get(dev); + if (!hdev) + return -ENODEV; + + err = hci_dev_do_open(hdev); + + hci_dev_put(hdev); + + return err; +} + static int hci_dev_do_close(struct hci_dev *hdev) { BT_DBG("%s %p", hdev->name, hdev); @@ -1665,7 +1675,7 @@ static void hci_power_on(struct work_struct *work) BT_DBG("%s", hdev->name); - err = hci_dev_open(hdev->id); + err = hci_dev_do_open(hdev); if (err < 0) { mgmt_set_powered_failed(hdev, err); return; -- cgit v0.10.2 From e1d08f406792219ace03aa02e53a6946abc15ec8 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 1 Oct 2013 22:44:50 +0300 Subject: Bluetooth: Fix workqueue synchronization in hci_dev_open When hci_sock.c calls hci_dev_open it needs to ensure that there isn't pending work in progress, such as that which is scheduled for the initial setup procedure or the one for automatically powering off after the setup procedure. This adds the necessary calls to ensure that any previously scheduled work is completed before attempting to call hci_dev_do_open. This patch fixes a race with old user space versions where we might receive a HCIDEVUP ioctl before the setup procedure has been completed. When that happens the setup procedures callback may fail early and leave the device in an inconsistent state, causing e.g. the setup callback to be (incorrectly) called more than once. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 1bc4324..7cbdd33 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1273,6 +1273,16 @@ int hci_dev_open(__u16 dev) if (!hdev) return -ENODEV; + /* We need to ensure that no other power on/off work is pending + * before proceeding to call hci_dev_do_open. This is + * particularly important if the setup procedure has not yet + * completed. + */ + if (test_and_clear_bit(HCI_AUTO_OFF, &hdev->dev_flags)) + cancel_delayed_work(&hdev->power_off); + + flush_workqueue(hdev->req_workqueue); + err = hci_dev_do_open(hdev); hci_dev_put(hdev); -- cgit v0.10.2 From c037874ca291a47b863c0732aac0dda98cda66c7 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 1 Oct 2013 12:19:12 -0700 Subject: Bluetooth: btmrvl: add btmrvl_send_sync_cmd() function Command preparation code is used multiple times. This patch separate out this common code and create btmrvl_send_sync_cmd() function. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index 9a9f518..d9d4229 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -57,8 +57,7 @@ bool btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb) ocf = hci_opcode_ocf(opcode); ogf = hci_opcode_ogf(opcode); - if (ocf == BT_CMD_MODULE_CFG_REQ && - priv->btmrvl_dev.sendcmdflag) { + if (priv->btmrvl_dev.sendcmdflag) { priv->btmrvl_dev.sendcmdflag = false; priv->adapter->cmd_complete = true; wake_up_interruptible(&priv->adapter->cmd_wait_q); @@ -116,7 +115,6 @@ int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb) adapter->hs_state = HS_ACTIVATED; if (adapter->psmode) adapter->ps_state = PS_SLEEP; - wake_up_interruptible(&adapter->cmd_wait_q); BT_DBG("HS ACTIVATED!"); } else { BT_DBG("HS Enable failed"); @@ -168,11 +166,11 @@ exit: } EXPORT_SYMBOL_GPL(btmrvl_process_event); -int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd) +static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no, + const void *param, u8 len) { struct sk_buff *skb; struct btmrvl_cmd *cmd; - int ret = 0; skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC); if (skb == NULL) { @@ -181,9 +179,11 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd) } cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd)); - cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_MODULE_CFG_REQ)); - cmd->length = 1; - cmd->data[0] = subcmd; + cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, cmd_no)); + cmd->length = len; + + if (len) + memcpy(cmd->data, param, len); bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT; @@ -194,19 +194,23 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd) priv->adapter->cmd_complete = false; - BT_DBG("Queue module cfg Command"); - wake_up_interruptible(&priv->main_thread.wait_q); if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q, priv->adapter->cmd_complete, - msecs_to_jiffies(WAIT_UNTIL_CMD_RESP))) { - ret = -ETIMEDOUT; - BT_ERR("module_cfg_cmd(%x): timeout: %d", - subcmd, priv->btmrvl_dev.sendcmdflag); - } + msecs_to_jiffies(WAIT_UNTIL_CMD_RESP))) + return -ETIMEDOUT; - BT_DBG("module cfg Command done"); + return 0; +} + +int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd) +{ + int ret; + + ret = btmrvl_send_sync_cmd(priv, BT_CMD_MODULE_CFG_REQ, &subcmd, 1); + if (ret) + BT_ERR("module_cfg_cmd(%x) failed\n", subcmd); return ret; } @@ -214,61 +218,36 @@ EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd); int btmrvl_send_hscfg_cmd(struct btmrvl_private *priv) { - struct sk_buff *skb; - struct btmrvl_cmd *cmd; - - skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC); - if (!skb) { - BT_ERR("No free skb"); - return -ENOMEM; - } - - cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd)); - cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, - BT_CMD_HOST_SLEEP_CONFIG)); - cmd->length = 2; - cmd->data[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8; - cmd->data[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff); + int ret; + u8 param[2]; - bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT; + param[0] = (priv->btmrvl_dev.gpio_gap & 0xff00) >> 8; + param[1] = (u8) (priv->btmrvl_dev.gpio_gap & 0x00ff); - skb->dev = (void *) priv->btmrvl_dev.hcidev; - skb_queue_head(&priv->adapter->tx_queue, skb); + BT_DBG("Sending HSCFG Command, gpio=0x%x, gap=0x%x", + param[0], param[1]); - BT_DBG("Queue HSCFG Command, gpio=0x%x, gap=0x%x", cmd->data[0], - cmd->data[1]); + ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_CONFIG, param, 2); + if (ret) + BT_ERR("HSCFG command failed\n"); - return 0; + return ret; } EXPORT_SYMBOL_GPL(btmrvl_send_hscfg_cmd); int btmrvl_enable_ps(struct btmrvl_private *priv) { - struct sk_buff *skb; - struct btmrvl_cmd *cmd; - - skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC); - if (skb == NULL) { - BT_ERR("No free skb"); - return -ENOMEM; - } - - cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd)); - cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, - BT_CMD_AUTO_SLEEP_MODE)); - cmd->length = 1; + int ret; + u8 param; if (priv->btmrvl_dev.psmode) - cmd->data[0] = BT_PS_ENABLE; + param = BT_PS_ENABLE; else - cmd->data[0] = BT_PS_DISABLE; - - bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT; - - skb->dev = (void *) priv->btmrvl_dev.hcidev; - skb_queue_head(&priv->adapter->tx_queue, skb); + param = BT_PS_DISABLE; - BT_DBG("Queue PSMODE Command:%d", cmd->data[0]); + ret = btmrvl_send_sync_cmd(priv, BT_CMD_AUTO_SLEEP_MODE, ¶m, 1); + if (ret) + BT_ERR("PSMODE command failed\n"); return 0; } @@ -276,37 +255,11 @@ EXPORT_SYMBOL_GPL(btmrvl_enable_ps); int btmrvl_enable_hs(struct btmrvl_private *priv) { - struct sk_buff *skb; - struct btmrvl_cmd *cmd; - int ret = 0; - - skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC); - if (skb == NULL) { - BT_ERR("No free skb"); - return -ENOMEM; - } - - cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd)); - cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_HOST_SLEEP_ENABLE)); - cmd->length = 0; - - bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT; - - skb->dev = (void *) priv->btmrvl_dev.hcidev; - skb_queue_head(&priv->adapter->tx_queue, skb); - - BT_DBG("Queue hs enable Command"); - - wake_up_interruptible(&priv->main_thread.wait_q); + int ret; - if (!wait_event_interruptible_timeout(priv->adapter->cmd_wait_q, - priv->adapter->hs_state, - msecs_to_jiffies(WAIT_UNTIL_HS_STATE_CHANGED))) { - ret = -ETIMEDOUT; - BT_ERR("timeout: %d, %d,%d", priv->adapter->hs_state, - priv->adapter->ps_state, - priv->adapter->wakeup_tries); - } + ret = btmrvl_send_sync_cmd(priv, BT_CMD_HOST_SLEEP_ENABLE, NULL, 0); + if (ret) + BT_ERR("Host sleep enable command failed\n"); return ret; } -- cgit v0.10.2 From 7d5b400cb0018bd23f643adbd413e5e77cce6409 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 1 Oct 2013 12:19:13 -0700 Subject: Bluetooth: btmrvl: get rid of struct btmrvl_cmd Replace this proprietary structure with the standard one (struct hci_command_hdr). Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h index 27068d1..42f7028 100644 --- a/drivers/bluetooth/btmrvl_drv.h +++ b/drivers/bluetooth/btmrvl_drv.h @@ -116,12 +116,6 @@ struct btmrvl_private { #define PS_SLEEP 0x01 #define PS_AWAKE 0x00 -struct btmrvl_cmd { - __le16 ocf_ogf; - u8 length; - u8 data[4]; -} __packed; - struct btmrvl_event { u8 ec; /* event counter */ u8 length; diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index d9d4229..a4da7c8 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -170,20 +170,20 @@ static int btmrvl_send_sync_cmd(struct btmrvl_private *priv, u16 cmd_no, const void *param, u8 len) { struct sk_buff *skb; - struct btmrvl_cmd *cmd; + struct hci_command_hdr *hdr; - skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC); + skb = bt_skb_alloc(HCI_COMMAND_HDR_SIZE + len, GFP_ATOMIC); if (skb == NULL) { BT_ERR("No free skb"); return -ENOMEM; } - cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd)); - cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, cmd_no)); - cmd->length = len; + hdr = (struct hci_command_hdr *)skb_put(skb, HCI_COMMAND_HDR_SIZE); + hdr->opcode = cpu_to_le16(hci_opcode_pack(OGF, cmd_no)); + hdr->plen = len; if (len) - memcpy(cmd->data, param, len); + memcpy(skb_put(skb, len), param, len); bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT; -- cgit v0.10.2 From 4b245722cabc6ee6d56924f10944b14a725ffd61 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 1 Oct 2013 12:19:14 -0700 Subject: Bluetooth: btmrvl: add setup handler Move initialization code to hdev's setup handler. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index a4da7c8..e0ae1f4 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -432,6 +432,21 @@ static int btmrvl_open(struct hci_dev *hdev) return 0; } +static int btmrvl_setup(struct hci_dev *hdev) +{ + struct btmrvl_private *priv = hci_get_drvdata(hdev); + + btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ); + + priv->btmrvl_dev.psmode = 1; + btmrvl_enable_ps(priv); + + priv->btmrvl_dev.gpio_gap = 0xffff; + btmrvl_send_hscfg_cmd(priv); + + return 0; +} + /* * This function handles the event generated by firmware, rx data * received from firmware, and tx data sent from kernel. @@ -525,8 +540,7 @@ int btmrvl_register_hdev(struct btmrvl_private *priv) hdev->flush = btmrvl_flush; hdev->send = btmrvl_send_frame; hdev->ioctl = btmrvl_ioctl; - - btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ); + hdev->setup = btmrvl_setup; hdev->dev_type = priv->btmrvl_dev.dev_type; diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 00da6df..5b70bcb 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -1046,12 +1046,6 @@ static int btmrvl_sdio_probe(struct sdio_func *func, goto disable_host_int; } - priv->btmrvl_dev.psmode = 1; - btmrvl_enable_ps(priv); - - priv->btmrvl_dev.gpio_gap = 0xffff; - btmrvl_send_hscfg_cmd(priv); - return 0; disable_host_int: -- cgit v0.10.2 From 2cc8689028cd077e3e9cb9a192b1bb524fe38935 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 1 Oct 2013 12:19:15 -0700 Subject: Bluetooth: btmrvl: add calibration data download support A text file containing calibration data in hex format can be provided at following path: /lib/firmware/mrvl/sd8797_caldata.conf The data will be downloaded to firmware during initialization. Reviewed-by: Mike Frysinger Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Hyuckjoo Lee Signed-off-by: Marcel Holtmann diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h index 42f7028..f9d1833 100644 --- a/drivers/bluetooth/btmrvl_drv.h +++ b/drivers/bluetooth/btmrvl_drv.h @@ -23,6 +23,8 @@ #include #include #include +#include +#include #define BTM_HEADER_LEN 4 #define BTM_UPLD_SIZE 2312 @@ -41,6 +43,8 @@ struct btmrvl_thread { struct btmrvl_device { void *card; struct hci_dev *hcidev; + struct device *dev; + const char *cal_data; u8 dev_type; @@ -91,6 +95,7 @@ struct btmrvl_private { #define BT_CMD_HOST_SLEEP_CONFIG 0x59 #define BT_CMD_HOST_SLEEP_ENABLE 0x5A #define BT_CMD_MODULE_CFG_REQ 0x5B +#define BT_CMD_LOAD_CONFIG_DATA 0x61 /* Sub-commands: Module Bringup/Shutdown Request/Response */ #define MODULE_BRINGUP_REQ 0xF1 @@ -116,6 +121,9 @@ struct btmrvl_private { #define PS_SLEEP 0x01 #define PS_AWAKE 0x00 +#define BT_CMD_DATA_SIZE 32 +#define BT_CAL_DATA_SIZE 28 + struct btmrvl_event { u8 ec; /* event counter */ u8 length; diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c index e0ae1f4..6e7bd4e 100644 --- a/drivers/bluetooth/btmrvl_main.c +++ b/drivers/bluetooth/btmrvl_main.c @@ -432,12 +432,128 @@ static int btmrvl_open(struct hci_dev *hdev) return 0; } +/* + * This function parses provided calibration data input. It should contain + * hex bytes separated by space or new line character. Here is an example. + * 00 1C 01 37 FF FF FF FF 02 04 7F 01 + * CE BA 00 00 00 2D C6 C0 00 00 00 00 + * 00 F0 00 00 + */ +static int btmrvl_parse_cal_cfg(const u8 *src, u32 len, u8 *dst, u32 dst_size) +{ + const u8 *s = src; + u8 *d = dst; + int ret; + u8 tmp[3]; + + tmp[2] = '\0'; + while ((s - src) <= len - 2) { + if (isspace(*s)) { + s++; + continue; + } + + if (isxdigit(*s)) { + if ((d - dst) >= dst_size) { + BT_ERR("calibration data file too big!!!"); + return -EINVAL; + } + + memcpy(tmp, s, 2); + + ret = kstrtou8(tmp, 16, d++); + if (ret < 0) + return ret; + + s += 2; + } else { + return -EINVAL; + } + } + if (d == dst) + return -EINVAL; + + return 0; +} + +static int btmrvl_load_cal_data(struct btmrvl_private *priv, + u8 *config_data) +{ + int i, ret; + u8 data[BT_CMD_DATA_SIZE]; + + data[0] = 0x00; + data[1] = 0x00; + data[2] = 0x00; + data[3] = BT_CMD_DATA_SIZE - 4; + + /* Swap cal-data bytes. Each four bytes are swapped. Considering 4 + * byte SDIO header offset, mapping of input and output bytes will be + * {3, 2, 1, 0} -> {0+4, 1+4, 2+4, 3+4}, + * {7, 6, 5, 4} -> {4+4, 5+4, 6+4, 7+4} */ + for (i = 4; i < BT_CMD_DATA_SIZE; i++) + data[i] = config_data[(i / 4) * 8 - 1 - i]; + + print_hex_dump_bytes("Calibration data: ", + DUMP_PREFIX_OFFSET, data, BT_CMD_DATA_SIZE); + + ret = btmrvl_send_sync_cmd(priv, BT_CMD_LOAD_CONFIG_DATA, data, + BT_CMD_DATA_SIZE); + if (ret) + BT_ERR("Failed to download caibration data\n"); + + return 0; +} + +static int +btmrvl_process_cal_cfg(struct btmrvl_private *priv, u8 *data, u32 size) +{ + u8 cal_data[BT_CAL_DATA_SIZE]; + int ret; + + ret = btmrvl_parse_cal_cfg(data, size, cal_data, sizeof(cal_data)); + if (ret) + return ret; + + ret = btmrvl_load_cal_data(priv, cal_data); + if (ret) { + BT_ERR("Fail to load calibrate data"); + return ret; + } + + return 0; +} + +static int btmrvl_cal_data_config(struct btmrvl_private *priv) +{ + const struct firmware *cfg; + int ret; + const char *cal_data = priv->btmrvl_dev.cal_data; + + if (!cal_data) + return 0; + + ret = request_firmware(&cfg, cal_data, priv->btmrvl_dev.dev); + if (ret < 0) { + BT_DBG("Failed to get %s file, skipping cal data download", + cal_data); + return 0; + } + + ret = btmrvl_process_cal_cfg(priv, (u8 *)cfg->data, cfg->size); + release_firmware(cfg); + return ret; +} + static int btmrvl_setup(struct hci_dev *hdev) { struct btmrvl_private *priv = hci_get_drvdata(hdev); btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ); + if (btmrvl_cal_data_config(priv)) + BT_ERR("Set cal data failed"); + priv->btmrvl_dev.psmode = 1; btmrvl_enable_ps(priv); diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c index 5b70bcb..332475e 100644 --- a/drivers/bluetooth/btmrvl_sdio.c +++ b/drivers/bluetooth/btmrvl_sdio.c @@ -18,7 +18,6 @@ * this warranty disclaimer. **/ -#include #include #include @@ -102,6 +101,7 @@ static const struct btmrvl_sdio_card_reg btmrvl_reg_88xx = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { .helper = "mrvl/sd8688_helper.bin", .firmware = "mrvl/sd8688.bin", + .cal_data = NULL, .reg = &btmrvl_reg_8688, .sd_blksz_fw_dl = 64, }; @@ -109,6 +109,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8688 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { .helper = NULL, .firmware = "mrvl/sd8787_uapsta.bin", + .cal_data = NULL, .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl = 256, }; @@ -116,6 +117,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8787 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { .helper = NULL, .firmware = "mrvl/sd8797_uapsta.bin", + .cal_data = "mrvl/sd8797_caldata.conf", .reg = &btmrvl_reg_87xx, .sd_blksz_fw_dl = 256, }; @@ -123,6 +125,7 @@ static const struct btmrvl_sdio_device btmrvl_sdio_sd8797 = { static const struct btmrvl_sdio_device btmrvl_sdio_sd8897 = { .helper = NULL, .firmware = "mrvl/sd8897_uapsta.bin", + .cal_data = NULL, .reg = &btmrvl_reg_88xx, .sd_blksz_fw_dl = 256, }; @@ -1006,6 +1009,7 @@ static int btmrvl_sdio_probe(struct sdio_func *func, struct btmrvl_sdio_device *data = (void *) id->driver_data; card->helper = data->helper; card->firmware = data->firmware; + card->cal_data = data->cal_data; card->reg = data->reg; card->sd_blksz_fw_dl = data->sd_blksz_fw_dl; } @@ -1034,6 +1038,8 @@ static int btmrvl_sdio_probe(struct sdio_func *func, } card->priv = priv; + priv->btmrvl_dev.dev = &card->func->dev; + priv->btmrvl_dev.cal_data = card->cal_data; /* Initialize the interface specific function pointers */ priv->hw_host_to_card = btmrvl_sdio_host_to_card; @@ -1216,4 +1222,5 @@ MODULE_FIRMWARE("mrvl/sd8688_helper.bin"); MODULE_FIRMWARE("mrvl/sd8688.bin"); MODULE_FIRMWARE("mrvl/sd8787_uapsta.bin"); MODULE_FIRMWARE("mrvl/sd8797_uapsta.bin"); +MODULE_FIRMWARE("mrvl/sd8797_caldata.conf"); MODULE_FIRMWARE("mrvl/sd8897_uapsta.bin"); diff --git a/drivers/bluetooth/btmrvl_sdio.h b/drivers/bluetooth/btmrvl_sdio.h index 43d35a6..6872d9e 100644 --- a/drivers/bluetooth/btmrvl_sdio.h +++ b/drivers/bluetooth/btmrvl_sdio.h @@ -85,6 +85,7 @@ struct btmrvl_sdio_card { u32 ioport; const char *helper; const char *firmware; + const char *cal_data; const struct btmrvl_sdio_card_reg *reg; u16 sd_blksz_fw_dl; u8 rx_unit; @@ -94,6 +95,7 @@ struct btmrvl_sdio_card { struct btmrvl_sdio_device { const char *helper; const char *firmware; + const char *cal_data; const struct btmrvl_sdio_card_reg *reg; u16 sd_blksz_fw_dl; }; -- cgit v0.10.2 From 56f8790102f48a4959a729ecdccff332591014e1 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 2 Oct 2013 13:43:13 +0300 Subject: Bluetooth: Introduce a new HCI_BREDR_ENABLED flag To allow treating dual-mode (BR/EDR/LE) controllers as single-mode ones (LE-only) we want to introduce a new HCI_BREDR_ENABLED flag to track whether BR/EDR is enabled or not (previously we simply looked at the feature bit with lmp_bredr_enabled). This patch add the new flag and updates the relevant places to test against it instead of using lmp_bredr_enabled. The flag is by default enabled when registering an adapter and only cleared if necessary once the local features have been read during the HCI init procedure. We cannot completely block BR/EDR usage in case user space uses raw HCI sockets but the patch tries to block this in places where possible, such as the various BR/EDR specific ioctls. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 7ede266..4fa08d7 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -122,6 +122,7 @@ enum { HCI_LINK_SECURITY, HCI_PERIODIC_INQ, HCI_FAST_CONNECTABLE, + HCI_BREDR_ENABLED, }; /* A mask for the flags that are supposed to remain when a reset happens diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index d2380e0..514148b 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -581,6 +581,9 @@ static struct hci_conn *hci_connect_acl(struct hci_dev *hdev, bdaddr_t *dst, { struct hci_conn *acl; + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + return ERR_PTR(-ENOTSUPP); + acl = hci_conn_hash_lookup_ba(hdev, ACL_LINK, dst); if (!acl) { acl = hci_conn_add(hdev, ACL_LINK, dst); diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 7cbdd33..14df032 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -519,6 +519,8 @@ static void hci_init2_req(struct hci_request *req, unsigned long opt) if (lmp_bredr_capable(hdev)) bredr_setup(req); + else + clear_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); if (lmp_le_capable(hdev)) le_setup(req); @@ -1034,6 +1036,11 @@ int hci_inquiry(void __user *arg) goto done; } + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { + err = -EOPNOTSUPP; + goto done; + } + hci_dev_lock(hdev); if (inquiry_cache_age(hdev) > INQUIRY_CACHE_AGE_MAX || inquiry_cache_empty(hdev) || ir.flags & IREQ_CACHE_FLUSH) { @@ -1101,7 +1108,7 @@ static u8 create_ad(struct hci_dev *hdev, u8 *ptr) if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) flags |= LE_AD_GENERAL; - if (!lmp_bredr_capable(hdev)) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) flags |= LE_AD_NO_BREDR; if (lmp_le_br_capable(hdev)) @@ -1493,6 +1500,11 @@ int hci_dev_cmd(unsigned int cmd, void __user *arg) goto done; } + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { + err = -EOPNOTSUPP; + goto done; + } + switch (cmd) { case HCISETAUTH: err = hci_req_sync(hdev, hci_auth_req, dr.dev_opt, @@ -2318,8 +2330,13 @@ int hci_register_dev(struct hci_dev *hdev) set_bit(HCI_SETUP, &hdev->dev_flags); - if (hdev->dev_type != HCI_AMP) + if (hdev->dev_type != HCI_AMP) { set_bit(HCI_AUTO_OFF, &hdev->dev_flags); + /* Assume BR/EDR support until proven otherwise (such as + * through reading supported features during init. + */ + set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + } write_lock(&hci_dev_list_lock); list_add(&hdev->list, &hci_dev_list); diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index ad38629..e1c41b0 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -408,7 +408,7 @@ static u32 get_current_settings(struct hci_dev *hdev) if (test_bit(HCI_PAIRABLE, &hdev->dev_flags)) settings |= MGMT_SETTING_PAIRABLE; - if (lmp_bredr_capable(hdev)) + if (test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) settings |= MGMT_SETTING_BREDR; if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) @@ -929,7 +929,7 @@ static int set_discoverable(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); - if (!lmp_bredr_capable(hdev)) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) return cmd_status(sk, hdev->id, MGMT_OP_SET_DISCOVERABLE, MGMT_STATUS_NOT_SUPPORTED); @@ -1085,7 +1085,7 @@ static int set_connectable(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); - if (!lmp_bredr_capable(hdev)) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) return cmd_status(sk, hdev->id, MGMT_OP_SET_CONNECTABLE, MGMT_STATUS_NOT_SUPPORTED); @@ -1208,7 +1208,7 @@ static int set_link_security(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); - if (!lmp_bredr_capable(hdev)) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) return cmd_status(sk, hdev->id, MGMT_OP_SET_LINK_SECURITY, MGMT_STATUS_NOT_SUPPORTED); @@ -1342,7 +1342,7 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) BT_DBG("request for %s", hdev->name); - if (!lmp_bredr_capable(hdev)) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, MGMT_STATUS_NOT_SUPPORTED); @@ -1409,7 +1409,7 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) MGMT_STATUS_INVALID_PARAMS); /* LE-only devices do not allow toggling LE on/off */ - if (!lmp_bredr_capable(hdev)) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) return cmd_status(sk, hdev->id, MGMT_OP_SET_LE, MGMT_STATUS_REJECTED); @@ -1720,7 +1720,7 @@ static int set_dev_class(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); - if (!lmp_bredr_capable(hdev)) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) return cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, MGMT_STATUS_NOT_SUPPORTED); @@ -2803,7 +2803,7 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, switch (hdev->discovery.type) { case DISCOV_TYPE_BREDR: - if (!lmp_bredr_capable(hdev)) { + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, MGMT_STATUS_NOT_SUPPORTED); mgmt_pending_remove(cmd); @@ -2835,7 +2835,7 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, } if (hdev->discovery.type == DISCOV_TYPE_INTERLEAVED && - !lmp_bredr_capable(hdev)) { + !test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, MGMT_STATUS_NOT_SUPPORTED); mgmt_pending_remove(cmd); @@ -3282,7 +3282,8 @@ static int set_fast_connectable(struct sock *sk, struct hci_dev *hdev, BT_DBG("%s", hdev->name); - if (!lmp_bredr_capable(hdev) || hdev->hci_ver < BLUETOOTH_VER_1_2) + if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags) || + hdev->hci_ver < BLUETOOTH_VER_1_2) return cmd_status(sk, hdev->id, MGMT_OP_SET_FAST_CONNECTABLE, MGMT_STATUS_NOT_SUPPORTED); @@ -3646,7 +3647,8 @@ static int powered_update_hci(struct hci_dev *hdev) sizeof(link_sec), &link_sec); if (lmp_bredr_capable(hdev)) { - set_bredr_scan(&req); + if (test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + set_bredr_scan(&req); update_class(&req); update_name(&req); update_eir(&req); -- cgit v0.10.2 From 0663ca2a032eea12480a8f86fe08bef9d72f8faf Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 2 Oct 2013 13:43:14 +0300 Subject: Bluetooth: Add a new mgmt_set_bredr command This patch introduces a new mgmt command for enabling/disabling BR/EDR functionality. This can be convenient when one wants to make a dual-mode controller behave like a single-mode one. The command is only available for dual-mode controllers and requires that LE is enabled before using it. The BR/EDR setting can be enabled at any point, however disabling it requires the controller to be powered off (otherwise a "rejected" response will be sent). Disabling the BR/EDR setting will automatically disable all other BR/EDR related settings. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 421d763..7347df8 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -354,6 +354,8 @@ struct mgmt_cp_set_device_id { #define MGMT_OP_SET_ADVERTISING 0x0029 +#define MGMT_OP_SET_BREDR 0x002A + #define MGMT_EV_CMD_COMPLETE 0x0001 struct mgmt_ev_cmd_complete { __le16 opcode; diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index d171c04b..4785ab0 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -297,6 +297,11 @@ static void hci_cc_write_scan_enable(struct hci_dev *hdev, struct sk_buff *skb) goto done; } + /* We need to ensure that we set this back on if someone changed + * the scan mode through a raw HCI socket. + */ + set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + old_pscan = test_and_clear_bit(HCI_PSCAN, &hdev->flags); old_iscan = test_and_clear_bit(HCI_ISCAN, &hdev->flags); diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index e1c41b0..dcce0cf 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -75,6 +75,7 @@ static const u16 mgmt_commands[] = { MGMT_OP_UNBLOCK_DEVICE, MGMT_OP_SET_DEVICE_ID, MGMT_OP_SET_ADVERTISING, + MGMT_OP_SET_BREDR, }; static const u16 mgmt_events[] = { @@ -3337,6 +3338,121 @@ unlock: return err; } +static void set_bredr_complete(struct hci_dev *hdev, u8 status) +{ + struct pending_cmd *cmd; + + BT_DBG("status 0x%02x", status); + + hci_dev_lock(hdev); + + cmd = mgmt_pending_find(MGMT_OP_SET_BREDR, hdev); + if (!cmd) + goto unlock; + + if (status) { + u8 mgmt_err = mgmt_status(status); + + /* We need to restore the flag if related HCI commands + * failed. + */ + clear_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + + cmd_status(cmd->sk, cmd->index, cmd->opcode, mgmt_err); + } else { + send_settings_rsp(cmd->sk, MGMT_OP_SET_BREDR, hdev); + new_settings(hdev, cmd->sk); + } + + mgmt_pending_remove(cmd); + +unlock: + hci_dev_unlock(hdev); +} + +static int set_bredr(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) +{ + struct mgmt_mode *cp = data; + struct pending_cmd *cmd; + struct hci_request req; + int err; + + BT_DBG("request for %s", hdev->name); + + if (!lmp_bredr_capable(hdev) || !lmp_le_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_BREDR, + MGMT_STATUS_NOT_SUPPORTED); + + if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_BREDR, + MGMT_STATUS_REJECTED); + + if (cp->val != 0x00 && cp->val != 0x01) + return cmd_status(sk, hdev->id, MGMT_OP_SET_BREDR, + MGMT_STATUS_INVALID_PARAMS); + + hci_dev_lock(hdev); + + if (cp->val == test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { + err = send_settings_rsp(sk, MGMT_OP_SET_BREDR, hdev); + goto unlock; + } + + if (!hdev_is_powered(hdev)) { + if (!cp->val) { + clear_bit(HCI_CONNECTABLE, &hdev->dev_flags); + clear_bit(HCI_DISCOVERABLE, &hdev->dev_flags); + clear_bit(HCI_SSP_ENABLED, &hdev->dev_flags); + clear_bit(HCI_LINK_SECURITY, &hdev->dev_flags); + clear_bit(HCI_FAST_CONNECTABLE, &hdev->dev_flags); + clear_bit(HCI_HS_ENABLED, &hdev->dev_flags); + } + + change_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + + err = send_settings_rsp(sk, MGMT_OP_SET_BREDR, hdev); + if (err < 0) + goto unlock; + + err = new_settings(hdev, sk); + goto unlock; + } + + /* Reject disabling when powered on */ + if (!cp->val) { + err = cmd_status(sk, hdev->id, MGMT_OP_SET_BREDR, + MGMT_STATUS_REJECTED); + goto unlock; + } + + if (mgmt_pending_find(MGMT_OP_SET_BREDR, hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_SET_BREDR, + MGMT_STATUS_BUSY); + goto unlock; + } + + cmd = mgmt_pending_add(sk, MGMT_OP_SET_BREDR, hdev, data, len); + if (!cmd) { + err = -ENOMEM; + goto unlock; + } + + /* We need to flip the bit already here so that hci_update_ad + * generates the correct flags. + */ + set_bit(HCI_BREDR_ENABLED, &hdev->dev_flags); + + hci_req_init(&req, hdev); + hci_update_ad(&req); + err = hci_req_run(&req, set_bredr_complete); + if (err < 0) + mgmt_pending_remove(cmd); + +unlock: + hci_dev_unlock(hdev); + return err; +} + static bool ltk_is_valid(struct mgmt_ltk_info *key) { if (key->authenticated != 0x00 && key->authenticated != 0x01) @@ -3452,6 +3568,7 @@ static const struct mgmt_handler { { unblock_device, false, MGMT_UNBLOCK_DEVICE_SIZE }, { set_device_id, false, MGMT_SET_DEVICE_ID_SIZE }, { set_advertising, false, MGMT_SETTING_SIZE }, + { set_bredr, false, MGMT_SETTING_SIZE }, }; @@ -3633,6 +3750,9 @@ static int powered_update_hci(struct hci_dev *hdev) cp.simul != lmp_host_le_br_capable(hdev)) hci_req_add(&req, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(cp), &cp); + + /* In case BR/EDR was toggled during the AUTO_OFF phase */ + hci_update_ad(&req); } if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) { -- cgit v0.10.2 From a0cdf960bec0b040307229bc25c40fa33c20dff1 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 00:27:02 -0700 Subject: Bluetooth: Restrict disabling of HS when controller is powered off Disabling the high speed setting when the controller is powered on has too many side effects that are not taken care of. And in general it is not an useful operation anyway. So just make such a command fail with a rejection error message. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index dcce0cf..4ac3169 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1353,10 +1353,17 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) hci_dev_lock(hdev); - if (cp->val) + if (cp->val) { changed = !test_and_set_bit(HCI_HS_ENABLED, &hdev->dev_flags); - else + } else { + if (hdev_is_powered(hdev)) { + err = cmd_status(sk, hdev->id, MGMT_OP_SET_HS, + MGMT_STATUS_REJECTED); + goto unlock; + } + changed = test_and_clear_bit(HCI_HS_ENABLED, &hdev->dev_flags); + } err = send_settings_rsp(sk, MGMT_OP_SET_HS, hdev); if (err < 0) -- cgit v0.10.2 From d13eafce2c892d57f1eb243e43dfe48b4626006d Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 04:41:30 -0700 Subject: Bluetooth: Add management command for setting static address On dual-mode BR/EDR/LE and LE only controllers it is possible to configure a random address. There are two types or random addresses, one is static and the other private. Since the random private addresses require special privacy feature to be supported, the configuration of these two are kept separate. This command allows for setting the static random address. It is only supported on controllers with LE support. The static random address is suppose to be valid for the lifetime of the controller or at least until the next power cycle. To ensure such behavior, setting of the address is limited to when the controller is powered off. The special BDADDR_ANY address (00:00:00:00:00:00) can be used to disable the static address. This is also the default value. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 4fa08d7..d7fd825 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -978,6 +978,8 @@ struct hci_rp_le_read_local_features { __u8 features[8]; } __packed; +#define HCI_OP_LE_SET_RANDOM_ADDR 0x2005 + #define HCI_OP_LE_READ_ADV_TX_POWER 0x2007 struct hci_rp_le_read_adv_tx_power { __u8 status; diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index 26cc9f7..e09c305 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -140,6 +140,7 @@ struct hci_dev { __u8 bus; __u8 dev_type; bdaddr_t bdaddr; + bdaddr_t static_addr; __u8 dev_name[HCI_MAX_NAME_LENGTH]; __u8 short_name[HCI_MAX_SHORT_NAME_LENGTH]; __u8 eir[HCI_MAX_EIR_LENGTH]; diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h index 7347df8..2ad433bb 100644 --- a/include/net/bluetooth/mgmt.h +++ b/include/net/bluetooth/mgmt.h @@ -356,6 +356,12 @@ struct mgmt_cp_set_device_id { #define MGMT_OP_SET_BREDR 0x002A +#define MGMT_OP_SET_STATIC_ADDRESS 0x002B +struct mgmt_cp_set_static_address { + bdaddr_t bdaddr; +} __packed; +#define MGMT_SET_STATIC_ADDRESS_SIZE 6 + #define MGMT_EV_CMD_COMPLETE 0x0001 struct mgmt_ev_cmd_complete { __le16 opcode; diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4ac3169..b871632 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -76,6 +76,7 @@ static const u16 mgmt_commands[] = { MGMT_OP_SET_DEVICE_ID, MGMT_OP_SET_ADVERTISING, MGMT_OP_SET_BREDR, + MGMT_OP_SET_STATIC_ADDRESS, }; static const u16 mgmt_events[] = { @@ -3247,6 +3248,46 @@ unlock: return err; } +static int set_static_address(struct sock *sk, struct hci_dev *hdev, + void *data, u16 len) +{ + struct mgmt_cp_set_static_address *cp = data; + int err; + + BT_DBG("%s", hdev->name); + + if (!lmp_le_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_STATIC_ADDRESS, + MGMT_STATUS_NOT_SUPPORTED); + + if (hdev_is_powered(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_SET_STATIC_ADDRESS, + MGMT_STATUS_REJECTED); + + if (bacmp(&cp->bdaddr, BDADDR_ANY)) { + if (!bacmp(&cp->bdaddr, BDADDR_NONE)) + return cmd_status(sk, hdev->id, + MGMT_OP_SET_STATIC_ADDRESS, + MGMT_STATUS_INVALID_PARAMS); + + /* Two most significant bits shall be set */ + if ((cp->bdaddr.b[5] & 0xc0) != 0xc0) + return cmd_status(sk, hdev->id, + MGMT_OP_SET_STATIC_ADDRESS, + MGMT_STATUS_INVALID_PARAMS); + } + + hci_dev_lock(hdev); + + bacpy(&hdev->static_addr, &cp->bdaddr); + + err = cmd_complete(sk, hdev->id, MGMT_OP_SET_STATIC_ADDRESS, 0, NULL, 0); + + hci_dev_unlock(hdev); + + return err; +} + static void fast_connectable_complete(struct hci_dev *hdev, u8 status) { struct pending_cmd *cmd; @@ -3576,6 +3617,7 @@ static const struct mgmt_handler { { set_device_id, false, MGMT_SET_DEVICE_ID_SIZE }, { set_advertising, false, MGMT_SETTING_SIZE }, { set_bredr, false, MGMT_SETTING_SIZE }, + { set_static_address, false, MGMT_SET_STATIC_ADDRESS_SIZE }, }; @@ -3762,6 +3804,13 @@ static int powered_update_hci(struct hci_dev *hdev) hci_update_ad(&req); } + if (lmp_le_capable(hdev)) { + /* Set random address to static address if configured */ + if (bacmp(&hdev->static_addr, BDADDR_ANY)) + hci_req_add(&req, HCI_OP_LE_SET_RANDOM_ADDR, 6, + &hdev->static_addr); + } + if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) { u8 adv = 0x01; -- cgit v0.10.2 From e6fe798652bfdcdde32a33c2758853e1a8f0c759 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 2 Oct 2013 15:45:22 +0300 Subject: Bluetooth: Fix REJECTED vs NOT_SUPPORTED mgmt responses The REJECTED management response should mainly be used when the adapter is in a state where we cannot accept some command or a specific parameter value. The NOT_SUPPORTED response in turn means that the adapter really cannot support the command or parameter value. This patch fixes this distinction and adds two helper functions to easily get the appropriate LE or BR/EDR related status response. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index b871632..461d5bb 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -920,20 +920,41 @@ static void cmd_status_rsp(struct pending_cmd *cmd, void *data) mgmt_pending_remove(cmd); } +static u8 mgmt_bredr_support(struct hci_dev *hdev) +{ + if (!lmp_bredr_capable(hdev)) + return MGMT_STATUS_NOT_SUPPORTED; + else if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + return MGMT_STATUS_REJECTED; + else + return MGMT_STATUS_SUCCESS; +} + +static u8 mgmt_le_support(struct hci_dev *hdev) +{ + if (!lmp_le_capable(hdev)) + return MGMT_STATUS_NOT_SUPPORTED; + else if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) + return MGMT_STATUS_REJECTED; + else + return MGMT_STATUS_SUCCESS; +} + static int set_discoverable(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_cp_set_discoverable *cp = data; struct pending_cmd *cmd; u16 timeout; - u8 scan; + u8 scan, status; int err; BT_DBG("request for %s", hdev->name); - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + status = mgmt_bredr_support(hdev); + if (status) return cmd_status(sk, hdev->id, MGMT_OP_SET_DISCOVERABLE, - MGMT_STATUS_NOT_SUPPORTED); + status); if (cp->val != 0x00 && cp->val != 0x01) return cmd_status(sk, hdev->id, MGMT_OP_SET_DISCOVERABLE, @@ -1082,14 +1103,15 @@ static int set_connectable(struct sock *sk, struct hci_dev *hdev, void *data, struct mgmt_mode *cp = data; struct pending_cmd *cmd; struct hci_request req; - u8 scan; + u8 scan, status; int err; BT_DBG("request for %s", hdev->name); - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + status = mgmt_bredr_support(hdev); + if (status) return cmd_status(sk, hdev->id, MGMT_OP_SET_CONNECTABLE, - MGMT_STATUS_NOT_SUPPORTED); + status); if (cp->val != 0x00 && cp->val != 0x01) return cmd_status(sk, hdev->id, MGMT_OP_SET_CONNECTABLE, @@ -1205,14 +1227,15 @@ static int set_link_security(struct sock *sk, struct hci_dev *hdev, void *data, { struct mgmt_mode *cp = data; struct pending_cmd *cmd; - u8 val; + u8 val, status; int err; BT_DBG("request for %s", hdev->name); - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + status = mgmt_bredr_support(hdev); + if (status) return cmd_status(sk, hdev->id, MGMT_OP_SET_LINK_SECURITY, - MGMT_STATUS_NOT_SUPPORTED); + status); if (cp->val != 0x00 && cp->val != 0x01) return cmd_status(sk, hdev->id, MGMT_OP_SET_LINK_SECURITY, @@ -1340,13 +1363,14 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_mode *cp = data; bool changed; + u8 status; int err; BT_DBG("request for %s", hdev->name); - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) - return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, - MGMT_STATUS_NOT_SUPPORTED); + status = mgmt_bredr_support(hdev); + if (status) + return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, status); if (cp->val != 0x00 && cp->val != 0x01) return cmd_status(sk, hdev->id, MGMT_OP_SET_HS, @@ -2776,6 +2800,7 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, struct hci_request req; /* General inquiry access code (GIAC) */ u8 lap[3] = { 0x33, 0x8b, 0x9e }; + u8 status; int err; BT_DBG("%s", hdev->name); @@ -2812,9 +2837,10 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, switch (hdev->discovery.type) { case DISCOV_TYPE_BREDR: - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { + status = mgmt_bredr_support(hdev); + if (status) { err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, - MGMT_STATUS_NOT_SUPPORTED); + status); mgmt_pending_remove(cmd); goto failed; } @@ -2836,9 +2862,10 @@ static int start_discovery(struct sock *sk, struct hci_dev *hdev, case DISCOV_TYPE_LE: case DISCOV_TYPE_INTERLEAVED: - if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) { + status = mgmt_le_support(hdev); + if (status) { err = cmd_status(sk, hdev->id, MGMT_OP_START_DISCOVERY, - MGMT_STATUS_NOT_SUPPORTED); + status); mgmt_pending_remove(cmd); goto failed; } @@ -3182,18 +3209,15 @@ static int set_advertising(struct sock *sk, struct hci_dev *hdev, void *data, u1 struct mgmt_mode *cp = data; struct pending_cmd *cmd; struct hci_request req; - u8 val, enabled; + u8 val, enabled, status; int err; BT_DBG("request for %s", hdev->name); - if (!lmp_le_capable(hdev)) - return cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING, - MGMT_STATUS_NOT_SUPPORTED); - - if (!test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) + status = mgmt_le_support(hdev); + if (status) return cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING, - MGMT_STATUS_REJECTED); + status); if (cp->val != 0x00 && cp->val != 0x01) return cmd_status(sk, hdev->id, MGMT_OP_SET_ADVERTISING, @@ -3252,13 +3276,15 @@ static int set_static_address(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_cp_set_static_address *cp = data; + u8 status; int err; BT_DBG("%s", hdev->name); - if (!lmp_le_capable(hdev)) + status = mgmt_le_support(hdev); + if (status) return cmd_status(sk, hdev->id, MGMT_OP_SET_STATIC_ADDRESS, - MGMT_STATUS_NOT_SUPPORTED); + status); if (hdev_is_powered(hdev)) return cmd_status(sk, hdev->id, MGMT_OP_SET_STATIC_ADDRESS, -- cgit v0.10.2 From 11802b299f3337441d649dcb035a98ec1ff67ade Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Wed, 2 Oct 2013 16:02:24 +0300 Subject: Bluetooth: Fix advertising data flags with disabled BR/EDR We shouldn't include the simultaneous LE & BR/EDR flags in the LE advertising data if BR/EDR is disabled on a dual-mode controller. This patch fixes this issue and ensures that the create_ad function generates the correct flags when BR/EDR is disabled. Signed-off-by: Johan Hedberg Signed-off-by: Marcel Holtmann diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c index 14df032..82dbdc6 100644 --- a/net/bluetooth/hci_core.c +++ b/net/bluetooth/hci_core.c @@ -1108,14 +1108,14 @@ static u8 create_ad(struct hci_dev *hdev, u8 *ptr) if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags)) flags |= LE_AD_GENERAL; - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + if (test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) { + if (lmp_le_br_capable(hdev)) + flags |= LE_AD_SIM_LE_BREDR_CTRL; + if (lmp_host_le_br_capable(hdev)) + flags |= LE_AD_SIM_LE_BREDR_HOST; + } else { flags |= LE_AD_NO_BREDR; - - if (lmp_le_br_capable(hdev)) - flags |= LE_AD_SIM_LE_BREDR_CTRL; - - if (lmp_host_le_br_capable(hdev)) - flags |= LE_AD_SIM_LE_BREDR_HOST; + } if (flags) { BT_DBG("adv flags 0x%02x", flags); -- cgit v0.10.2 From 9ab8cf372977d1f89ebeb6201b6cf7a6774b9272 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 05:18:31 -0700 Subject: Bluetooth: Increment management interface revision This patch increments the management interface revision due to the various fixes, improvements and other changes that have gone in lately. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 461d5bb..3b3ed05 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -33,7 +33,7 @@ #include #define MGMT_VERSION 1 -#define MGMT_REVISION 3 +#define MGMT_REVISION 4 static const u16 mgmt_commands[] = { MGMT_OP_READ_INDEX_LIST, -- cgit v0.10.2 From d819c6cf1c064e74c50e38c3ff36a781bb49959c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 30 Sep 2013 11:02:46 +0200 Subject: iwlwifi: pcie: fix merge damage The merge b35c8097 seems to have lost commit eabc4ac5d, put the code back. Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/pcie/trans.c b/drivers/net/wireless/iwlwifi/pcie/trans.c index bad95d2..c3f904d 100644 --- a/drivers/net/wireless/iwlwifi/pcie/trans.c +++ b/drivers/net/wireless/iwlwifi/pcie/trans.c @@ -1401,6 +1401,10 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, spin_lock_init(&trans_pcie->reg_lock); init_waitqueue_head(&trans_pcie->ucode_write_waitq); + err = pci_enable_device(pdev); + if (err) + goto out_no_pci; + if (!cfg->base_params->pcie_l1_allowed) { /* * W/A - seems to solve weird behavior. We need to remove this @@ -1412,10 +1416,6 @@ struct iwl_trans *iwl_trans_pcie_alloc(struct pci_dev *pdev, PCIE_LINK_STATE_CLKPM); } - err = pci_enable_device(pdev); - if (err) - goto out_no_pci; - pci_set_master(pdev); err = pci_set_dma_mask(pdev, DMA_BIT_MASK(36)); -- cgit v0.10.2 From d0bf75a51b172fdd9dd90bfa03c0f5de473b6c94 Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:46 +0900 Subject: Bluetooth: Add the definition and structure for Set Reserved LT_ADDR The Set_Reserved_LT_ADDR command allows the host to request that the BR/EDR Controller reserve a specific LT_ADDR for Connectionless Slave Broadcast. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 90 "7.3.86 Set Reserved LT_ADDR Command [New Section] ... If the LT_ADDR indicated in the LT_ADDR parameter is already in use by the BR/EDR Controller, it shall return the ACL Connection Already Exists (0x0B) error code. If the LT_ADDR indicated in the LT_ADDR parameter is out of range, the controller shall return the Invalid HCI Command Parameters (0x12) error code. If the command succeeds, then the reserved LT_ADDR shall be used when issuing subsequent Set Connectionless Slave Broadcast Data and Set Connectionless Slave Broadcast commands. To ensure that the reserved LT_ADDR is not already allocated, it is recommended that this command be issued at some point after HCI_Reset is issued but before page scanning is enabled or paging is initiated." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index d7fd825..4d88809 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -839,6 +839,15 @@ struct hci_cp_write_le_host_supported { __u8 simul; } __packed; +#define HCI_OP_SET_RESERVED_LT_ADDR 0x0c74 +struct hci_cp_set_reserved_lt_addr { + __u8 lt_addr; +} __packed; +struct hci_rp_set_reserved_lt_addr { + __u8 status; + __u8 lt_addr; +} __packed; + #define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77 #define HCI_OP_READ_LOCAL_VERSION 0x1001 -- cgit v0.10.2 From 6a20eaf40419481dd55031ffe7a856e7a304ca4d Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:47 +0900 Subject: Bluetooth: Add the definition and structure for Delete Reserved LT_ADDR The Delete_Reserved_LT_ADDR command requests that the BR/EDR Controller cancel the reservation for a specific LT_ADDR reserved for the purposes of Connectionless Slave Broadcast. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 92 "7.3.87 Delete Reserved LT_ADDR Command [New Section] ... If the LT_ADDR indicated in the LT_ADDR parameter is not reserved by the BR/EDR Controller, it shall return the Unknown Connection Identifier (0x02) error code. If connectionless slave broadcast mode is still active, then the Controller shall return the Command Disallowed (0x0C) error code." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 4d88809..9b071f1 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -848,6 +848,15 @@ struct hci_rp_set_reserved_lt_addr { __u8 lt_addr; } __packed; +#define HCI_OP_DELETE_RESERVED_LT_ADDR 0x0c75 +struct hci_cp_delete_reserved_lt_addr { + __u8 lt_addr; +} __packed; +struct hci_rp_delete_reserved_lt_addr { + __u8 status; + __u8 lt_addr; +} __packed; + #define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77 #define HCI_OP_READ_LOCAL_VERSION 0x1001 -- cgit v0.10.2 From 7d1dab49f645557bb0b9246f7ae87fafd2716e70 Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:48 +0900 Subject: Bluetooth: Add the definition and structure for Set CSB Data The Set_Connectionless_Slave_Broadcast_Data command provides the ability for the Host to set Connectionless Slave Broadcast data in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 93 "7.3.88 Set Connectionless Slave Broadcast Data Command [New Section] ... If connectionless slave broadcast mode is disabled, this data shall be kept by the BR/EDR Controller and used once connectionless slave broadcast mode is enabled. If connectionless slave broadcast mode is enabled, and this command is successful, this data will be sent starting with the next Connectionless Slave Broadcast instant. The Data_Length field may be zero, in which case no data needs to be provided. The Host may fragment the data using the Fragment field in the command. If the combined length of the fragments exceeds the capacity of the largest allowed packet size specified in the Set Connectionless Slave Broadcast command, all fragments associated with the data being assembled shall be discarded and the Invalid HCI Command Parameters error (0x12) shall be returned." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 9b071f1..d9e0a84 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -35,6 +35,8 @@ #define HCI_MAX_AMP_ASSOC_SIZE 672 +#define HCI_MAX_CSB_DATA_SIZE 252 + /* HCI dev events */ #define HCI_DEV_REG 1 #define HCI_DEV_UNREG 2 @@ -857,6 +859,18 @@ struct hci_rp_delete_reserved_lt_addr { __u8 lt_addr; } __packed; +#define HCI_OP_SET_CSB_DATA 0x0c76 +struct hci_cp_set_csb_data { + __u8 lt_addr; + __u8 fragment; + __u8 data_length; + __u8 data[HCI_MAX_CSB_DATA_SIZE]; +} __packed; +struct hci_rp_set_csb_data { + __u8 status; + __u8 lt_addr; +} __packed; + #define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77 #define HCI_OP_READ_LOCAL_VERSION 0x1001 -- cgit v0.10.2 From a9b07a643f16332c4cc96259ef5cad2163f8e28a Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:49 +0900 Subject: Bluetooth: Add the structure for Write Sync Train Parameters The Write_Synchronization_Train_Parameters command configures the Synchronization Train functionality in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 97 "7.3.90 Write Synchronization Train Parameters Command [New Section] ... Note: The AFH_Channel_Map used in the Synchronization Train packets is configured by the Set_AFH_Channel_Classification command and the local channel classification in the BR/EDR Controller. Interval_Min and Interval_Max specify the allowed range of Sync_Train_Interval. Refer to [Vol. 2], Part B, section 2.7.2 for a detailed description of Sync_Train_Interval. The BR/EDR Controller shall select an interval from this range and return it in Sync_Train_Interval. If the Controller is unable to select a value from this range, it shall return the Invalid HCI Command Parameters (0x12) error code. Once started (via the Start_Synchronization_Train Command) the Synchronization Train will continue until synchronization_trainTO slots have passed or Connectionless Slave Broadcast has been disabled." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index d9e0a84..cad6ca1 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -873,6 +873,18 @@ struct hci_rp_set_csb_data { #define HCI_OP_READ_SYNC_TRAIN_PARAMS 0x0c77 +#define HCI_OP_WRITE_SYNC_TRAIN_PARAMS 0x0c78 +struct hci_cp_write_sync_train_params { + __le16 interval_min; + __le16 interval_max; + __le32 sync_train_tout; + __u8 service_data; +} __packed; +struct hci_rp_write_sync_train_params { + __u8 status; + __le16 sync_train_int; +} __packed; + #define HCI_OP_READ_LOCAL_VERSION 0x1001 struct hci_rp_read_local_version { __u8 status; -- cgit v0.10.2 From 8c9a041be2b8d534e770594a5e8d3251cc221bd1 Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:50 +0900 Subject: Bluetooth: Add the definition and structure for Set CSB he Set_Connectionless_Slave_Broadcast command controls the Connectionless Slave Broadcast functionality in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 78 "7.1.49 Set Connectionless Slave Broadcast Command [New Section] ... The LT_ADDR indicated in the Set_Connectionless_Slave_Broadcast shall be pre-allocated using the HCI_Set_Reserved_LT_ADDR command. If the LT_ADDR has not been reserved, the Unknown Connection Identifier (0x02) error code shall be returned. If the controller is unable to reserve sufficient bandwidth for the requested activity, the Connection Rejected Due to Limited Resources (0x0D) error code shall be returned. The LPO_Allowed parameter informs the BR/EDR Controller whether it is allowed to sleep. The Packet_Type parameter specifies which packet types are allowed. The Host shall either enable BR packet types only, or shall enable EDR and DM1 packet types only. The Interval_Min and Interval_Max parameters specify the range from which the BR/EDR Controller must select the Connectionless Slave Broadcast Interval. The selected Interval is returned." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index cad6ca1..42d3832 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -628,6 +628,22 @@ struct hci_rp_logical_link_cancel { __u8 flow_spec_id; } __packed; +#define HCI_OP_SET_CSB 0x0441 +struct hci_cp_set_csb { + __u8 enable; + __u8 lt_addr; + __u8 lpo_allowed; + __le16 packet_type; + __le16 interval_min; + __le16 interval_max; + __le16 csb_sv_tout; +} __packed; +struct hci_rp_set_csb { + __u8 status; + __u8 lt_addr; + __le16 interval; +} __packed; + #define HCI_OP_SNIFF_MODE 0x0803 struct hci_cp_sniff_mode { __le16 handle; -- cgit v0.10.2 From cefded981960d60f7d18f6596c020390b9764aa3 Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:51 +0900 Subject: Bluetooth: Add the definition for Start Synchronization Train The Start_Synchronization_Train command controls the Synchronization Train functionality in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 86 "7.1.51 Start Synchronization Train Command [New Section] ... If connectionless slave broadcast mode is not enabled, the Command Disallowed (0x0C) error code shall be returned. After receiving this command and returning a Command Status event, the Baseband starts attempting to send synchronization train packets containing information related to the enabled Connectionless Slave Broadcast packet timing. Note: The AFH_Channel_Map used in the synchronization train packets is configured by the Set_AFH_Channel_Classification command and the local channel classification in the BR/EDR Controller. The synchronization train packets will be sent using the parameters specified by the latest Write_Synchronization_Train_Parameters command. The Synchronization Train will continue until synchronization_trainTO slots (as specified in the last Write_Synchronization_Train command) have passed or until the Host disables the Connectionless Slave Broadcast logical transport." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 42d3832..657d2b0 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -644,6 +644,8 @@ struct hci_rp_set_csb { __le16 interval; } __packed; +#define HCI_OP_START_SYNC_TRAIN 0x0443 + #define HCI_OP_SNIFF_MODE 0x0803 struct hci_cp_sniff_mode { __le16 handle; -- cgit v0.10.2 From 2b359445d5578f65cdd5301dfcbf9e0bdc358b20 Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:52 +0900 Subject: Bluetooth: Add the definition and stcuture for Sync Train Complete The Synchronization Train Complete event indicates that the Start Synchronization Train command has completed. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 103 "7.7.67 Synchronization Train Complete Event [New Section] ... Event Parameters: Status 0x00 Start Synchronization Train command completed successfully. 0x01-0xFF Start Synchronization Train command failed. See Part D, Error Codes, for error codes and descriptions." Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 657d2b0..03f2a91 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1505,6 +1505,11 @@ struct hci_ev_num_comp_blocks { struct hci_comp_blocks_info handles[0]; } __packed; +#define HCI_EV_SYNC_TRAIN_COMPLETE 0x4F +struct hci_ev_sync_train_complete { + __u8 status; +} __packed; + /* Low energy meta events */ #define LE_CONN_ROLE_MASTER 0x00 -- cgit v0.10.2 From 2ed01805ee439056f4e1fe182846c029e0a08e49 Mon Sep 17 00:00:00 2001 From: DoHyun Pyun Date: Wed, 2 Oct 2013 21:54:53 +0900 Subject: Bluetooth: Add the definition for Slave Page Response Timeout The Slave Page Response Timeout event indicates to the Host that a slave page response timeout has occurred in the BR/EDR Controller. The Core Spec Addendum 4 adds this command in part B Connectionless Slave Broadcast. Bluetooth Core Specification Addendum 4 - Page 110 "7.7.72 Slave Page Response Timeout Event [New Section] ... Note: this event will be generated if the slave BR/EDR Controller responds to a page but does not receive the master FHS packet (see Baseband, Section 8.3.3) within pagerespTO. Event Parameters: NONE" Signed-off-by: Dohyun Pyun Signed-off-by: C S Bhargava Signed-off-by: Marcel Holtmann diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h index 03f2a91..b90eec5 100644 --- a/include/net/bluetooth/hci.h +++ b/include/net/bluetooth/hci.h @@ -1510,6 +1510,8 @@ struct hci_ev_sync_train_complete { __u8 status; } __packed; +#define HCI_EV_SLAVE_PAGE_RESP_TIMEOUT 0x54 + /* Low energy meta events */ #define LE_CONN_ROLE_MASTER 0x00 -- cgit v0.10.2 From 3b1662952ea9c2c32aac11d60f824fb94b2cf546 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 08:28:21 -0700 Subject: Bluetooth: Fix memory leak with L2CAP signal channels The wrong type of L2CAP signalling packets on the wrong type of either BR/EDR or LE links need to be dropped. When that happens the packet is dropped, but the memory not freed. So actually free the memory as well. Signed-off-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 6d42498..814563d 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -5330,7 +5330,7 @@ static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, l2cap_raw_recv(conn, skb); if (hcon->type != LE_LINK) - return; + goto drop; while (len >= L2CAP_CMD_HDR_SIZE) { u16 cmd_len; @@ -5363,6 +5363,7 @@ static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, len -= cmd_len; } +drop: kfree_skb(skb); } @@ -5378,7 +5379,7 @@ static inline void l2cap_sig_channel(struct l2cap_conn *conn, l2cap_raw_recv(conn, skb); if (hcon->type != ACL_LINK) - return; + goto drop; while (len >= L2CAP_CMD_HDR_SIZE) { u16 cmd_len; @@ -5411,6 +5412,7 @@ static inline void l2cap_sig_channel(struct l2cap_conn *conn, len -= cmd_len; } +drop: kfree_skb(skb); } -- cgit v0.10.2 From cdba5281b2496ffbca332e006f258951233bf53d Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 21:31:52 -0700 Subject: Bluetooth: Restrict SSP setting changes to BR/EDR enabled controllers Only when BR/EDR is supported and enabled, allow changing of the SSP setting. Just checking if the hardware supports SSP is not enough since it might be the case that BR/EDR is disabled. In the case that BR/EDR is disabled, but SSP supported by the controller the not supported error message is now returned. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 3b3ed05..b09c86b 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1296,11 +1296,15 @@ static int set_ssp(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_mode *cp = data; struct pending_cmd *cmd; - u8 val; + u8 val, status; int err; BT_DBG("request for %s", hdev->name); + status = mgmt_bredr_support(hdev); + if (status) + return cmd_status(sk, hdev->id, MGMT_OP_SET_SSP, status); + if (!lmp_ssp_capable(hdev)) return cmd_status(sk, hdev->id, MGMT_OP_SET_SSP, MGMT_STATUS_NOT_SUPPORTED); -- cgit v0.10.2 From 62af444319120347371ae24043da28db75b729db Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 22:10:32 -0700 Subject: Bluetooth: Allow setting static address even if LE is disabled Setting the static address does not depend on LE beeing enabled. It only depends on a controller with LE support. When depending on LE enabled this command becomes really complicated since in case LE gets disabled, it would be required to clear the static address and also its random address representation inside the controller. With future support for private addresses such complex setup should be avoided. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index b09c86b..bbe012e 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -3280,15 +3280,13 @@ static int set_static_address(struct sock *sk, struct hci_dev *hdev, void *data, u16 len) { struct mgmt_cp_set_static_address *cp = data; - u8 status; int err; BT_DBG("%s", hdev->name); - status = mgmt_le_support(hdev); - if (status) + if (!lmp_le_capable(hdev)) return cmd_status(sk, hdev->id, MGMT_OP_SET_STATIC_ADDRESS, - status); + MGMT_STATUS_NOT_SUPPORTED); if (hdev_is_powered(hdev)) return cmd_status(sk, hdev->id, MGMT_OP_SET_STATIC_ADDRESS, -- cgit v0.10.2 From 9060d5cf5200c37dd23f5502bd7c3ccadce04a5f Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 21:16:07 -0700 Subject: Bluetooth: Restrict loading of link keys to BR/EDR capable controllers Loading link keys into a LE only controller make no sense. The kernel would never use any of these keys. So instead of allowing userspace to waste memory, reject such operation with a not supported error message. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index bbe012e..bf33c52 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1825,6 +1825,12 @@ static int load_link_keys(struct sock *sk, struct hci_dev *hdev, void *data, u16 key_count, expected_len; int i; + BT_DBG("request for %s", hdev->name); + + if (!lmp_bredr_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_LOAD_LINK_KEYS, + MGMT_STATUS_NOT_SUPPORTED); + key_count = __le16_to_cpu(cp->key_count); expected_len = sizeof(*cp) + key_count * -- cgit v0.10.2 From cf99ba1359701ce82e756368513ddd0c5a7164ba Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 21:16:08 -0700 Subject: Bluetooth: Restrict loading of long term keys to LE capable controllers Loading long term keys into a BR/EDR only controller make no sense. The kernel would never use any of these keys. So instead of allowing userspace to waste memory, reject such operation with a not supported error message. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index bf33c52..4ce0f11 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -3553,6 +3553,12 @@ static int load_long_term_keys(struct sock *sk, struct hci_dev *hdev, u16 key_count, expected_len; int i, err; + BT_DBG("request for %s", hdev->name); + + if (!lmp_le_capable(hdev)) + return cmd_status(sk, hdev->id, MGMT_OP_LOAD_LONG_TERM_KEYS, + MGMT_STATUS_NOT_SUPPORTED); + key_count = __le16_to_cpu(cp->key_count); expected_len = sizeof(*cp) + key_count * -- cgit v0.10.2 From 6203fc983457a19a1c4c491ab0e94b4c4c884fb9 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 23:37:29 -0700 Subject: Bluetooth: Allow changing device class when BR/EDR is disabled Changing the device class when BR/EDR is disabled has no visible effect for remote devices. However to simplify the logic allow it as long as the controller supports BR/EDR operations. If it is not allowed, then the overall logic becomes rather complicated since the class of device values would need clearing or restoring when BR/EDR setting changes. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c index 4ce0f11..16125ff9 100644 --- a/net/bluetooth/mgmt.c +++ b/net/bluetooth/mgmt.c @@ -1757,7 +1757,7 @@ static int set_dev_class(struct sock *sk, struct hci_dev *hdev, void *data, BT_DBG("request for %s", hdev->name); - if (!test_bit(HCI_BREDR_ENABLED, &hdev->dev_flags)) + if (!lmp_bredr_capable(hdev)) return cmd_status(sk, hdev->id, MGMT_OP_SET_DEV_CLASS, MGMT_STATUS_NOT_SUPPORTED); -- cgit v0.10.2 From a28776296c7e3f2d0bb34e0e746968627fe588e8 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 23:46:54 -0700 Subject: Bluetooth: Fix switch statement order for L2CAP fixed channels The switch statement for the various L2CAP fixed channel handlers is not really ordered. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 814563d..0661ca6 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -6466,9 +6466,6 @@ static void l2cap_recv_frame(struct l2cap_conn *conn, struct sk_buff *skb) BT_DBG("len %d, cid 0x%4.4x", len, cid); switch (cid) { - case L2CAP_CID_LE_SIGNALING: - l2cap_le_sig_channel(conn, skb); - break; case L2CAP_CID_SIGNALING: l2cap_sig_channel(conn, skb); break; @@ -6483,6 +6480,10 @@ static void l2cap_recv_frame(struct l2cap_conn *conn, struct sk_buff *skb) l2cap_att_channel(conn, skb); break; + case L2CAP_CID_LE_SIGNALING: + l2cap_le_sig_channel(conn, skb); + break; + case L2CAP_CID_SMP: if (smp_sig_channel(conn, skb)) l2cap_conn_del(conn->hcon, EACCES); -- cgit v0.10.2 From 94b6a09b67ac4f0772d298aec0973fe3261150a0 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Wed, 2 Oct 2013 23:51:49 -0700 Subject: Bluetooth: Don't copy L2CAP LE signalling to raw sockets The L2CAP raw sockets are only used for BR/EDR signalling. Packets on LE links should not be forwarded there. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 0661ca6..65c5371 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -5327,8 +5327,6 @@ static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, struct l2cap_cmd_hdr cmd; int err; - l2cap_raw_recv(conn, skb); - if (hcon->type != LE_LINK) goto drop; -- cgit v0.10.2 From 7b9899dbcf432b188f3cc22bd1ad9e8050c496fc Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 3 Oct 2013 00:00:57 -0700 Subject: Bluetooth: SMP packets are only valid on LE connections When receiving SMP packets on a BR/EDR connection, then just drop the packet and do not try to process it. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index b5562ab..6e049497 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -847,10 +847,16 @@ static int smp_cmd_master_ident(struct l2cap_conn *conn, struct sk_buff *skb) int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) { + struct hci_conn *hcon = conn->hcon; __u8 code = skb->data[0]; __u8 reason; int err = 0; + if (hcon->type != LE_LINK) { + kfree_skb(skb); + return -ENOTSUPP; + } + if (!test_bit(HCI_LE_ENABLED, &conn->hcon->hdev->dev_flags)) { err = -ENOTSUPP; reason = SMP_PAIRING_NOTSUPP; -- cgit v0.10.2 From ae4fd2d37433ba58e17adbf1694b7b66eeaec76c Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 3 Oct 2013 00:03:39 -0700 Subject: Bluetooth: L2CAP connectionless channels are only valid for BR/EDR When receiving connectionless packets on a LE connection, just drop the packet. There is no concept of connectionless channels for LE. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 65c5371..102a510 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -6403,8 +6403,12 @@ done: static void l2cap_conless_channel(struct l2cap_conn *conn, __le16 psm, struct sk_buff *skb) { + struct hci_conn *hcon = conn->hcon; struct l2cap_chan *chan; + if (hcon->type != ACL_LINK) + goto drop; + chan = l2cap_global_chan_by_psm(0, psm, conn->src, conn->dst); if (!chan) goto drop; -- cgit v0.10.2 From b99707d7ee887f9df8b3f7cf75e1e9dbf3206df3 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 3 Oct 2013 02:54:11 -0700 Subject: Bluetooth: Drop packets on ATT fixed channel on BR/EDR The ATT fixed channel is only valid when using LE connections. On BR/EDR it is required to go through L2CAP connection oriented channel for ATT. Drop ATT packets when they are received on a BR/EDR connection. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 102a510..583517e1 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -6431,8 +6431,12 @@ drop: static void l2cap_att_channel(struct l2cap_conn *conn, struct sk_buff *skb) { + struct hci_conn *hcon = conn->hcon; struct l2cap_chan *chan; + if (hcon->type != LE_LINK) + goto drop; + chan = l2cap_global_chan_by_scid(BT_CONNECTED, L2CAP_CID_ATT, conn->src, conn->dst); if (!chan) -- cgit v0.10.2 From 92381f5cd72b3fb415efe2406ad9fa462a223151 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 3 Oct 2013 01:23:08 -0700 Subject: Bluetooth: Check minimum length of SMP packets When SMP packets are received, make sure they contain at least 1 byte header for the opcode. If not, drop the packet and disconnect the link. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 6e049497..884b208 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -848,8 +848,7 @@ static int smp_cmd_master_ident(struct l2cap_conn *conn, struct sk_buff *skb) int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) { struct hci_conn *hcon = conn->hcon; - __u8 code = skb->data[0]; - __u8 reason; + __u8 code, reason; int err = 0; if (hcon->type != LE_LINK) { @@ -857,12 +856,18 @@ int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) return -ENOTSUPP; } + if (skb->len < 1) { + kfree_skb(skb); + return -EILSEQ; + } + if (!test_bit(HCI_LE_ENABLED, &conn->hcon->hdev->dev_flags)) { err = -ENOTSUPP; reason = SMP_PAIRING_NOTSUPP; goto done; } + code = skb->data[0]; skb_pull(skb, sizeof(code)); /* -- cgit v0.10.2 From 4f3e219d95a3c31b916dcd5e2631c4e440736f79 Mon Sep 17 00:00:00 2001 From: Marcel Holtmann Date: Thu, 3 Oct 2013 01:26:37 -0700 Subject: Bluetooth: Only one command per L2CAP LE signalling is supported The Bluetooth specification makes it clear that only one command should be present in the L2CAP LE signalling packet. So tighten the checks here and restrict it to exactly one command. This is different from L2CAP BR/EDR signalling where multiple commands can be part of the same packet. Signed-off-by: Marcel Holtmann Signed-off-by: Johan Hedberg diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c index 583517e1..02dba4e 100644 --- a/net/bluetooth/l2cap_core.c +++ b/net/bluetooth/l2cap_core.c @@ -5322,43 +5322,37 @@ static inline void l2cap_le_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) { struct hci_conn *hcon = conn->hcon; - u8 *data = skb->data; - int len = skb->len; - struct l2cap_cmd_hdr cmd; + struct l2cap_cmd_hdr *cmd; + u16 len; int err; if (hcon->type != LE_LINK) goto drop; - while (len >= L2CAP_CMD_HDR_SIZE) { - u16 cmd_len; - memcpy(&cmd, data, L2CAP_CMD_HDR_SIZE); - data += L2CAP_CMD_HDR_SIZE; - len -= L2CAP_CMD_HDR_SIZE; + if (skb->len < L2CAP_CMD_HDR_SIZE) + goto drop; - cmd_len = le16_to_cpu(cmd.len); + cmd = (void *) skb->data; + skb_pull(skb, L2CAP_CMD_HDR_SIZE); - BT_DBG("code 0x%2.2x len %d id 0x%2.2x", cmd.code, cmd_len, - cmd.ident); + len = le16_to_cpu(cmd->len); - if (cmd_len > len || !cmd.ident) { - BT_DBG("corrupted command"); - break; - } + BT_DBG("code 0x%2.2x len %d id 0x%2.2x", cmd->code, len, cmd->ident); - err = l2cap_le_sig_cmd(conn, &cmd, data); - if (err) { - struct l2cap_cmd_rej_unk rej; + if (len != skb->len || !cmd->ident) { + BT_DBG("corrupted command"); + goto drop; + } - BT_ERR("Wrong link type (%d)", err); + err = l2cap_le_sig_cmd(conn, cmd, skb->data); + if (err) { + struct l2cap_cmd_rej_unk rej; - rej.reason = l2cap_err_to_reason(err); - l2cap_send_cmd(conn, cmd.ident, L2CAP_COMMAND_REJ, - sizeof(rej), &rej); - } + BT_ERR("Wrong link type (%d)", err); - data += cmd_len; - len -= cmd_len; + rej.reason = l2cap_err_to_reason(err); + l2cap_send_cmd(conn, cmd->ident, L2CAP_COMMAND_REJ, + sizeof(rej), &rej); } drop: -- cgit v0.10.2 From 4cd0ea456bba79f853ce030b8a58b00f2a38b69a Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 25 Sep 2013 13:05:40 +0200 Subject: brcmfmac: sync firmware event list Update event list to keep sync with firmware development. Use calculated event mask length instead of hard-coded value. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 2eb9e64..4de9aac 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -97,8 +97,6 @@ #define WLC_PHY_TYPE_LCN 8 #define WLC_PHY_TYPE_NULL 0xf -#define BRCMF_EVENTING_MASK_LEN 16 - #define TOE_TX_CSUM_OL 0x00000001 #define TOE_RX_CSUM_OL 0x00000002 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h index e679214..9ee5c51 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h @@ -102,7 +102,8 @@ struct brcmf_event; BRCMF_ENUM_DEF(DCS_REQUEST, 73) \ BRCMF_ENUM_DEF(FIFO_CREDIT_MAP, 74) \ BRCMF_ENUM_DEF(ACTION_FRAME_RX, 75) \ - BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127) + BRCMF_ENUM_DEF(BCMC_CREDIT_SUPPORT, 127) \ + BRCMF_ENUM_DEF(PSTA_PRIMARY_INTF_IND, 128) #define BRCMF_ENUM_DEF(id, val) \ BRCMF_E_##id = (val), @@ -114,6 +115,8 @@ enum brcmf_fweh_event_code { }; #undef BRCMF_ENUM_DEF +#define BRCMF_EVENTING_MASK_LEN (roundup(BRCMF_E_LAST, 8)/8) + /* flags field values in struct brcmf_event_msg */ #define BRCMF_EVENT_MSG_LINK 0x01 #define BRCMF_EVENT_MSG_FLUSHTXQ 0x02 -- cgit v0.10.2 From fe0401582ed4f4ba385b191a7aa1d5984fed81ed Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 25 Sep 2013 13:05:41 +0200 Subject: brcmfmac: add BCM4339 SDIO interface support BCM4339 is an a/b/g/n/ac 1x1 WiFi chip. This patch adds support for it through SDIO interface. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 592ae13..091c905 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -34,6 +34,7 @@ #include #include #include "sdio_host.h" +#include "sdio_chip.h" #include "dhd_dbg.h" #include "dhd_bus.h" @@ -41,13 +42,6 @@ #define DMA_ALIGN_MASK 0x03 -#define SDIO_DEVICE_ID_BROADCOM_43143 43143 -#define SDIO_DEVICE_ID_BROADCOM_43241 0x4324 -#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329 -#define SDIO_DEVICE_ID_BROADCOM_4330 0x4330 -#define SDIO_DEVICE_ID_BROADCOM_4334 0x4334 -#define SDIO_DEVICE_ID_BROADCOM_4335 0x4335 - #define SDIO_FUNC1_BLOCKSIZE 64 #define SDIO_FUNC2_BLOCKSIZE 512 @@ -58,7 +52,8 @@ static const struct sdio_device_id brcmf_sdmmc_ids[] = { {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4329)}, {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4330)}, {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4334)}, - {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, SDIO_DEVICE_ID_BROADCOM_4335)}, + {SDIO_DEVICE(SDIO_VENDOR_ID_BROADCOM, + SDIO_DEVICE_ID_BROADCOM_4335_4339)}, { /* end: all zeroes */ }, }; MODULE_DEVICE_TABLE(sdio, brcmf_sdmmc_ids); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index ca72177..023ddcb 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -444,6 +445,9 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, NULL); ci->chip = regdata & CID_ID_MASK; ci->chiprev = (regdata & CID_REV_MASK) >> CID_REV_SHIFT; + if (sdiodev->func[0]->device == SDIO_DEVICE_ID_BROADCOM_4335_4339 && + ci->chiprev >= 2) + ci->chip = BCM4339_CHIP_ID; ci->socitype = (regdata & CID_TYPE_MASK) >> CID_TYPE_SHIFT; brcmf_dbg(INFO, "chipid=0x%x chiprev=%d\n", ci->chip, ci->chiprev); @@ -541,6 +545,20 @@ static int brcmf_sdio_chip_recognition(struct brcmf_sdio_dev *sdiodev, ci->ramsize = 0xc0000; ci->rambase = 0x180000; break; + case BCM4339_CHIP_ID: + ci->c_inf[0].wrapbase = 0x18100000; + ci->c_inf[0].cib = 0x2e084411; + ci->c_inf[1].id = BCMA_CORE_SDIO_DEV; + ci->c_inf[1].base = 0x18005000; + ci->c_inf[1].wrapbase = 0x18105000; + ci->c_inf[1].cib = 0x15004211; + ci->c_inf[2].id = BCMA_CORE_ARM_CR4; + ci->c_inf[2].base = 0x18002000; + ci->c_inf[2].wrapbase = 0x18102000; + ci->c_inf[2].cib = 0x04084411; + ci->ramsize = 0xc0000; + ci->rambase = 0x180000; + break; default: brcmf_err("chipid 0x%x is not supported\n", ci->chip); return -ENODEV; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h index 83c041f..076b83c 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.h @@ -54,6 +54,14 @@ #define BRCMF_MAX_CORENUM 6 +/* SDIO device ID */ +#define SDIO_DEVICE_ID_BROADCOM_43143 43143 +#define SDIO_DEVICE_ID_BROADCOM_43241 0x4324 +#define SDIO_DEVICE_ID_BROADCOM_4329 0x4329 +#define SDIO_DEVICE_ID_BROADCOM_4330 0x4330 +#define SDIO_DEVICE_ID_BROADCOM_4334 0x4334 +#define SDIO_DEVICE_ID_BROADCOM_4335_4339 0x4335 + struct chip_core_info { u16 id; u16 rev; diff --git a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h index c1fe245..84113ea 100644 --- a/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h +++ b/drivers/net/wireless/brcm80211/include/brcm_hw_ids.h @@ -41,5 +41,6 @@ #define BCM4331_CHIP_ID 0x4331 #define BCM4334_CHIP_ID 0x4334 #define BCM4335_CHIP_ID 0x4335 +#define BCM4339_CHIP_ID 0x4339 #endif /* _BRCM_HW_IDS_H_ */ -- cgit v0.10.2 From 7434785652457482a4b22c280a83776c3873940d Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 25 Sep 2013 13:05:42 +0200 Subject: brcmfmac: add valid core index check in related functions Perform a valid check for core index to avoid illegal address access. Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Arend van Spriel Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c index 023ddcb..2096a14 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/sdio_chip.c @@ -137,6 +137,8 @@ brcmf_sdio_sb_iscoreup(struct brcmf_sdio_dev *sdiodev, u8 idx; idx = brcmf_sdio_chip_getinfidx(ci, coreid); + if (idx == BRCMF_MAX_CORENUM) + return false; regdata = brcmf_sdio_regrl(sdiodev, CORE_SB(ci->c_inf[idx].base, sbtmstatelow), @@ -155,6 +157,8 @@ brcmf_sdio_ai_iscoreup(struct brcmf_sdio_dev *sdiodev, bool ret; idx = brcmf_sdio_chip_getinfidx(ci, coreid); + if (idx == BRCMF_MAX_CORENUM) + return false; regdata = brcmf_sdio_regrl(sdiodev, ci->c_inf[idx].wrapbase+BCMA_IOCTL, NULL); @@ -262,6 +266,8 @@ brcmf_sdio_ai_coredisable(struct brcmf_sdio_dev *sdiodev, u32 regdata; idx = brcmf_sdio_chip_getinfidx(ci, coreid); + if (idx == BRCMF_MAX_CORENUM) + return; /* if core is already in reset, just return */ regdata = brcmf_sdio_regrl(sdiodev, @@ -305,6 +311,8 @@ brcmf_sdio_sb_resetcore(struct brcmf_sdio_dev *sdiodev, u8 idx; idx = brcmf_sdio_chip_getinfidx(ci, coreid); + if (idx == BRCMF_MAX_CORENUM) + return; /* * Must do the disable sequence first to work for @@ -369,6 +377,8 @@ brcmf_sdio_ai_resetcore(struct brcmf_sdio_dev *sdiodev, u32 regdata; idx = brcmf_sdio_chip_getinfidx(ci, coreid); + if (idx == BRCMF_MAX_CORENUM) + return; /* must disable first to work for arbitrary current core state */ brcmf_sdio_ai_coredisable(sdiodev, ci, coreid, core_bits); -- cgit v0.10.2 From 5491c11c67f2c83c95fa9a26172bc1994580aed7 Mon Sep 17 00:00:00 2001 From: Franky Lin Date: Wed, 25 Sep 2013 13:05:43 +0200 Subject: brcmfmac: reserve memory for bus layer in sk_buff::cb Bus layer need to share sk_buff::cb with firmware signal feature. Reserve necessary memory so they won't overwrite each other. Reviewed-by: Arend Van Spriel Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Franky Lin Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 1aa75d5..f9ba4d0 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1786,10 +1786,15 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus) return; } +/** + * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for + * bus layer usage. + */ /* flag marking a dummy skb added for DMA alignment requirement */ -#define DUMMY_SKB_FLAG 0x10000 +#define ALIGN_SKB_FLAG 0x8000 /* bit mask of data length chopped from the previous packet */ -#define DUMMY_SKB_CHOP_LEN_MASK 0xffff +#define ALIGN_SKB_CHOP_LEN_MASK 0x7fff + /** * brcmf_sdio_txpkt_prep - packet preparation for transmit * @bus: brcmf_sdio structure pointer @@ -1854,7 +1859,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq, memcpy(pkt_new->data, pkt_next->data + pkt_next->len - tail_chop, tail_chop); - *(u32 *)(pkt_new->cb) = DUMMY_SKB_FLAG + tail_chop; + *(u32 *)(pkt_new->cb) = ALIGN_SKB_FLAG + tail_chop; skb_trim(pkt_next, pkt_next->len - tail_chop); __skb_queue_after(pktq, pkt_next, pkt_new); } else { @@ -1908,8 +1913,8 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq) skb_queue_walk_safe(pktq, pkt_next, tmp) { dummy_flags = *(u32 *)(pkt_next->cb); - if (dummy_flags & DUMMY_SKB_FLAG) { - chop_len = dummy_flags & DUMMY_SKB_CHOP_LEN_MASK; + if (dummy_flags & ALIGN_SKB_FLAG) { + chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK; if (chop_len) { pkt_prev = pkt_next->prev; memcpy(pkt_prev->data + pkt_prev->len, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c index 82f9140..d0cd0bf 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c @@ -168,6 +168,7 @@ enum brcmf_fws_skb_state { /** * struct brcmf_skbuff_cb - control buffer associated with skbuff. * + * @bus_flags: 2 bytes reserved for bus specific parameters * @if_flags: holds interface index and packet related flags. * @htod: host to device packet identifier (used in PKTTAG tlv). * @state: transmit state of the packet. @@ -177,6 +178,7 @@ enum brcmf_fws_skb_state { * provides 48 bytes of storage so this structure should not exceed that. */ struct brcmf_skbuff_cb { + u16 bus_flags; u16 if_flags; u32 htod; enum brcmf_fws_skb_state state; -- cgit v0.10.2 From 5af47fb394b54c4e8ff9035d1aa590e3c7b611dd Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 25 Sep 2013 13:05:44 +0200 Subject: brcmfmac: fix sparse error 'bad constant expression' The definition of BRCMF_EVENTING_MASK_LEN results in a sparse error message .../fweh.c:331:22: error: bad constant expression .../fweh.c:388:22: error: bad constant expression .../dhd_common.c:256:22: error: bad constant expression This is caused by the use of roundup() in BRCMF_EVENTING_MASK_LEN and it is used to allocate an array variable on the stack. Better use DIV_ROUND_UP() macro. Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h index 9ee5c51..14bc24d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/fweh.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/fweh.h @@ -115,7 +115,7 @@ enum brcmf_fweh_event_code { }; #undef BRCMF_ENUM_DEF -#define BRCMF_EVENTING_MASK_LEN (roundup(BRCMF_E_LAST, 8)/8) +#define BRCMF_EVENTING_MASK_LEN DIV_ROUND_UP(BRCMF_E_LAST, 8) /* flags field values in struct brcmf_event_msg */ #define BRCMF_EVENT_MSG_LINK 0x01 -- cgit v0.10.2 From f2c44fe7c83eeee6ca8828d9b3d0b4c205a7bc1b Mon Sep 17 00:00:00 2001 From: Hante Meuleman Date: Wed, 25 Sep 2013 13:05:45 +0200 Subject: brcmfmac: Use fw filename and nvram based of devid for sdio. SDIO firmware download routines uses one name for firmware file and nvram file for all sdio devices. This is not user friendly. Use fw filename and nvram filename based upon chip id and revision. Reported-by: Stephen Warren Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index f9ba4d0..6e72b73 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -275,11 +275,6 @@ struct rte_console { /* Flags for SDH calls */ #define F2SYNC (SDIO_REQ_4BYTE | SDIO_REQ_FIXED) -#define BRCMF_SDIO_FW_NAME "brcm/brcmfmac-sdio.bin" -#define BRCMF_SDIO_NV_NAME "brcm/brcmfmac-sdio.txt" -MODULE_FIRMWARE(BRCMF_SDIO_FW_NAME); -MODULE_FIRMWARE(BRCMF_SDIO_NV_NAME); - #define BRCMF_IDLE_IMMEDIATE (-1) /* Enter idle immediately */ #define BRCMF_IDLE_ACTIVE 0 /* Do not request any SD clock change * when idle @@ -454,9 +449,6 @@ struct brcmf_sdio { struct work_struct datawork; atomic_t dpc_tskcnt; - const struct firmware *firmware; - u32 fw_ptr; - bool txoff; /* Transmit flow-controlled */ struct brcmf_sdio_count sdcnt; bool sr_enabled; /* SaveRestore enabled */ @@ -493,6 +485,100 @@ enum brcmf_sdio_frmtype { BRCMF_SDIO_FT_SUB, }; +#define BCM43143_FIRMWARE_NAME "brcm/brcmfmac43143-sdio.bin" +#define BCM43143_NVRAM_NAME "brcm/brcmfmac43143-sdio.txt" +#define BCM43241B0_FIRMWARE_NAME "brcm/brcmfmac43241b0-sdio.bin" +#define BCM43241B0_NVRAM_NAME "brcm/brcmfmac43241b0-sdio.txt" +#define BCM43241B4_FIRMWARE_NAME "brcm/brcmfmac43241b4-sdio.bin" +#define BCM43241B4_NVRAM_NAME "brcm/brcmfmac43241b4-sdio.txt" +#define BCM4329_FIRMWARE_NAME "brcm/brcmfmac4329-sdio.bin" +#define BCM4329_NVRAM_NAME "brcm/brcmfmac4329-sdio.txt" +#define BCM4330_FIRMWARE_NAME "brcm/brcmfmac4330-sdio.bin" +#define BCM4330_NVRAM_NAME "brcm/brcmfmac4330-sdio.txt" +#define BCM4334_FIRMWARE_NAME "brcm/brcmfmac4334-sdio.bin" +#define BCM4334_NVRAM_NAME "brcm/brcmfmac4334-sdio.txt" +#define BCM4335_FIRMWARE_NAME "brcm/brcmfmac4335-sdio.bin" +#define BCM4335_NVRAM_NAME "brcm/brcmfmac4335-sdio.txt" + +MODULE_FIRMWARE(BCM43143_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM43143_NVRAM_NAME); +MODULE_FIRMWARE(BCM43241B0_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM43241B0_NVRAM_NAME); +MODULE_FIRMWARE(BCM43241B4_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM43241B4_NVRAM_NAME); +MODULE_FIRMWARE(BCM4329_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4329_NVRAM_NAME); +MODULE_FIRMWARE(BCM4330_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4330_NVRAM_NAME); +MODULE_FIRMWARE(BCM4334_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4334_NVRAM_NAME); +MODULE_FIRMWARE(BCM4335_FIRMWARE_NAME); +MODULE_FIRMWARE(BCM4335_NVRAM_NAME); + +struct brcmf_firmware_names { + u32 chipid; + u32 revmsk; + const char *bin; + const char *nv; +}; + +enum brcmf_firmware_type { + BRCMF_FIRMWARE_BIN, + BRCMF_FIRMWARE_NVRAM +}; + +#define BRCMF_FIRMWARE_NVRAM(name) \ + name ## _FIRMWARE_NAME, name ## _NVRAM_NAME + +static const struct brcmf_firmware_names brcmf_fwname_data[] = { + { BCM43143_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM43143) }, + { BCM43241_CHIP_ID, 0x0000001F, BRCMF_FIRMWARE_NVRAM(BCM43241B0) }, + { BCM43241_CHIP_ID, 0xFFFFFFE0, BRCMF_FIRMWARE_NVRAM(BCM43241B4) }, + { BCM4329_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4329) }, + { BCM4330_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4330) }, + { BCM4334_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4334) }, + { BCM4335_CHIP_ID, 0xFFFFFFFF, BRCMF_FIRMWARE_NVRAM(BCM4335) } +}; + + +static const struct firmware *brcmf_sdbrcm_get_fw(struct brcmf_sdio *bus, + enum brcmf_firmware_type type) +{ + const struct firmware *fw; + const char *name; + int err, i; + + for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) { + if (brcmf_fwname_data[i].chipid == bus->ci->chip && + brcmf_fwname_data[i].revmsk & BIT(bus->ci->chiprev)) { + switch (type) { + case BRCMF_FIRMWARE_BIN: + name = brcmf_fwname_data[i].bin; + break; + case BRCMF_FIRMWARE_NVRAM: + name = brcmf_fwname_data[i].nv; + break; + default: + brcmf_err("invalid firmware type (%d)\n", type); + return NULL; + } + goto found; + } + } + brcmf_err("Unknown chipid %d [%d]\n", + bus->ci->chip, bus->ci->chiprev); + return NULL; + +found: + err = request_firmware(&fw, name, &bus->sdiodev->func[2]->dev); + if ((err) || (!fw)) { + brcmf_err("fail to request firmware %s (%d)\n", name, err); + return NULL; + } + + return fw; +} + static void pkt_align(struct sk_buff *p, int len, int align) { uint datalign; @@ -3042,69 +3128,43 @@ static bool brcmf_sdbrcm_download_state(struct brcmf_sdio *bus, bool enter) return true; } -static int brcmf_sdbrcm_get_image(char *buf, int len, struct brcmf_sdio *bus) -{ - if (bus->firmware->size < bus->fw_ptr + len) - len = bus->firmware->size - bus->fw_ptr; - - memcpy(buf, &bus->firmware->data[bus->fw_ptr], len); - bus->fw_ptr += len; - return len; -} - static int brcmf_sdbrcm_download_code_file(struct brcmf_sdio *bus) { + const struct firmware *fw; + int err; int offset; - uint len; - u8 *memblock = NULL, *memptr; - int ret; - u8 idx; - - brcmf_dbg(INFO, "Enter\n"); - - ret = request_firmware(&bus->firmware, BRCMF_SDIO_FW_NAME, - &bus->sdiodev->func[2]->dev); - if (ret) { - brcmf_err("Fail to request firmware %d\n", ret); - return ret; - } - bus->fw_ptr = 0; - - memptr = memblock = kmalloc(MEMBLOCK + BRCMF_SDALIGN, GFP_ATOMIC); - if (memblock == NULL) { - ret = -ENOMEM; - goto err; - } - if ((u32)(unsigned long)memblock % BRCMF_SDALIGN) - memptr += (BRCMF_SDALIGN - - ((u32)(unsigned long)memblock % BRCMF_SDALIGN)); - - offset = bus->ci->rambase; - - /* Download image */ - len = brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus); - idx = brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_ARM_CR4); - if (BRCMF_MAX_CORENUM != idx) - memcpy(&bus->ci->rst_vec, memptr, sizeof(bus->ci->rst_vec)); - while (len) { - ret = brcmf_sdio_ramrw(bus->sdiodev, true, offset, memptr, len); - if (ret) { + int address; + int len; + + fw = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_BIN); + if (fw == NULL) + return -ENOENT; + + if (brcmf_sdio_chip_getinfidx(bus->ci, BCMA_CORE_ARM_CR4) != + BRCMF_MAX_CORENUM) + memcpy(&bus->ci->rst_vec, fw->data, sizeof(bus->ci->rst_vec)); + + err = 0; + offset = 0; + address = bus->ci->rambase; + while (offset < fw->size) { + len = ((offset + MEMBLOCK) < fw->size) ? MEMBLOCK : + fw->size - offset; + err = brcmf_sdio_ramrw(bus->sdiodev, true, address, + (u8 *)&fw->data[offset], len); + if (err) { brcmf_err("error %d on writing %d membytes at 0x%08x\n", - ret, MEMBLOCK, offset); - goto err; + err, len, address); + goto failure; } - - offset += MEMBLOCK; - len = brcmf_sdbrcm_get_image((char *)memptr, MEMBLOCK, bus); + offset += len; + address += len; } -err: - kfree(memblock); - - release_firmware(bus->firmware); - bus->fw_ptr = 0; +failure: + release_firmware(fw); - return ret; + return err; } /* @@ -3116,7 +3176,8 @@ err: * by two NULs. */ -static int brcmf_process_nvram_vars(struct brcmf_sdio *bus) +static int brcmf_process_nvram_vars(struct brcmf_sdio *bus, + const struct firmware *nv) { char *varbuf; char *dp; @@ -3125,12 +3186,12 @@ static int brcmf_process_nvram_vars(struct brcmf_sdio *bus) int ret = 0; uint buf_len, n, len; - len = bus->firmware->size; + len = nv->size; varbuf = vmalloc(len); if (!varbuf) return -ENOMEM; - memcpy(varbuf, bus->firmware->data, len); + memcpy(varbuf, nv->data, len); dp = varbuf; findNewline = false; @@ -3182,18 +3243,16 @@ err: static int brcmf_sdbrcm_download_nvram(struct brcmf_sdio *bus) { + const struct firmware *nv; int ret; - ret = request_firmware(&bus->firmware, BRCMF_SDIO_NV_NAME, - &bus->sdiodev->func[2]->dev); - if (ret) { - brcmf_err("Fail to request nvram %d\n", ret); - return ret; - } + nv = brcmf_sdbrcm_get_fw(bus, BRCMF_FIRMWARE_NVRAM); + if (nv == NULL) + return -ENOENT; - ret = brcmf_process_nvram_vars(bus); + ret = brcmf_process_nvram_vars(bus, nv); - release_firmware(bus->firmware); + release_firmware(nv); return ret; } -- cgit v0.10.2 From 05f3820b2e2e391bbc4434448c10f08387f209aa Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Wed, 25 Sep 2013 13:05:46 +0200 Subject: brcmfmac: rework rx path bus interface The brcmfmac has common and bus specific part. The rx function api was using sk_buff_head. Changed to sk_buff instead. Reviewed-by: Hante Meuleman Reviewed-by: Franky (Zhenhui) Lin Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h index f7c1985..200ee9b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_bus.h @@ -136,7 +136,7 @@ extern bool brcmf_c_prec_enq(struct device *dev, struct pktq *q, struct sk_buff *pkt, int prec); /* Receive frame for delivery to OS. Callee disposes of rxp. */ -extern void brcmf_rx_frames(struct device *dev, struct sk_buff_head *rxlist); +extern void brcmf_rx_frame(struct device *dev, struct sk_buff *rxp); /* Indication from bus module regarding presence/insertion of dongle. */ extern int brcmf_attach(uint bus_hdrlen, struct device *dev); diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c index e067aec..42bf19a 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c @@ -509,9 +509,8 @@ netif_rx: } } -void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) +void brcmf_rx_frame(struct device *dev, struct sk_buff *skb) { - struct sk_buff *skb, *pnext; struct brcmf_if *ifp; struct brcmf_bus *bus_if = dev_get_drvdata(dev); struct brcmf_pub *drvr = bus_if->drvr; @@ -519,29 +518,24 @@ void brcmf_rx_frames(struct device *dev, struct sk_buff_head *skb_list) u8 ifidx; int ret; - brcmf_dbg(DATA, "Enter: %s: count=%u\n", dev_name(dev), - skb_queue_len(skb_list)); + brcmf_dbg(DATA, "Enter: %s: rxp=%p\n", dev_name(dev), skb); - skb_queue_walk_safe(skb_list, skb, pnext) { - skb_unlink(skb, skb_list); - - /* process and remove protocol-specific header */ - ret = brcmf_proto_hdrpull(drvr, true, &ifidx, skb); - ifp = drvr->iflist[ifidx]; - - if (ret || !ifp || !ifp->ndev) { - if ((ret != -ENODATA) && ifp) - ifp->stats.rx_errors++; - brcmu_pkt_buf_free_skb(skb); - continue; - } + /* process and remove protocol-specific header */ + ret = brcmf_proto_hdrpull(drvr, true, &ifidx, skb); + ifp = drvr->iflist[ifidx]; - rd = (struct brcmf_skb_reorder_data *)skb->cb; - if (rd->reorder) - brcmf_rxreorder_process_info(ifp, rd->reorder, skb); - else - brcmf_netif_rx(ifp, skb); + if (ret || !ifp || !ifp->ndev) { + if ((ret != -ENODATA) && ifp) + ifp->stats.rx_errors++; + brcmu_pkt_buf_free_skb(skb); + return; } + + rd = (struct brcmf_skb_reorder_data *)skb->cb; + if (rd->reorder) + brcmf_rxreorder_process_info(ifp, rd->reorder, skb); + else + brcmf_netif_rx(ifp, skb); } void brcmf_txfinalize(struct brcmf_pub *drvr, struct sk_buff *txp, diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c index 6e72b73..67f05db 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c @@ -1492,13 +1492,12 @@ static u8 brcmf_sdbrcm_rxglom(struct brcmf_sdio *bus, u8 rxseq) bus->glom.qlen, pfirst, pfirst->data, pfirst->len, pfirst->next, pfirst->prev); + skb_unlink(pfirst, &bus->glom); + brcmf_rx_frame(bus->sdiodev->dev, pfirst); + bus->sdcnt.rxglompkts++; } - /* sent any remaining packets up */ - if (bus->glom.qlen) - brcmf_rx_frames(bus->sdiodev->dev, &bus->glom); bus->sdcnt.rxglomframes++; - bus->sdcnt.rxglompkts += bus->glom.qlen; } return num; } @@ -1643,7 +1642,6 @@ static void brcmf_pad(struct brcmf_sdio *bus, u16 *pad, u16 *rdlen) static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) { struct sk_buff *pkt; /* Packet for event or data frames */ - struct sk_buff_head pktlist; /* needed for bus interface */ u16 pad; /* Number of pad bytes to read */ uint rxleft = 0; /* Remaining number of frames allowed */ int ret; /* Return code from calls */ @@ -1845,9 +1843,7 @@ static uint brcmf_sdio_readframes(struct brcmf_sdio *bus, uint maxframes) continue; } - skb_queue_head_init(&pktlist); - skb_queue_tail(&pktlist, pkt); - brcmf_rx_frames(bus->sdiodev->dev, &pktlist); + brcmf_rx_frame(bus->sdiodev->dev, pkt); } rxcount = maxframes - rxleft; diff --git a/drivers/net/wireless/brcm80211/brcmfmac/usb.c b/drivers/net/wireless/brcm80211/brcmfmac/usb.c index 39e01a7..bf6758d 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/usb.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/usb.c @@ -435,7 +435,6 @@ static void brcmf_usb_rx_complete(struct urb *urb) struct brcmf_usbreq *req = (struct brcmf_usbreq *)urb->context; struct brcmf_usbdev_info *devinfo = req->devinfo; struct sk_buff *skb; - struct sk_buff_head skbq; brcmf_dbg(USB, "Enter, urb->status=%d\n", urb->status); brcmf_usb_del_fromq(devinfo, req); @@ -450,10 +449,8 @@ static void brcmf_usb_rx_complete(struct urb *urb) } if (devinfo->bus_pub.state == BRCMFMAC_USB_STATE_UP) { - skb_queue_head_init(&skbq); - skb_queue_tail(&skbq, skb); skb_put(skb, urb->actual_length); - brcmf_rx_frames(devinfo->dev, &skbq); + brcmf_rx_frame(devinfo->dev, skb); brcmf_usb_rx_refill(devinfo, req); } else { brcmu_pkt_buf_free_skb(skb); -- cgit v0.10.2 From 3b9b74baa1af2952d719735b4a4a34706a593948 Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 25 Sep 2013 15:34:55 +0200 Subject: rt2800: add support for radio chip RF3070 Add support for new RF chip ID: 3070. It seems to be the same as 5370, maybe vendor just put wrong value on the eeprom, but add this id anyway since devices with it showed on the marked. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800.h b/drivers/net/wireless/rt2x00/rt2800.h index fa33b5e..e3eb952 100644 --- a/drivers/net/wireless/rt2x00/rt2800.h +++ b/drivers/net/wireless/rt2x00/rt2800.h @@ -52,6 +52,7 @@ * RF3322 2.4G 2T2R(RT3352/RT3371/RT3372/RT3391/RT3392) * RF3053 2.4G/5G 3T3R(RT3883/RT3563/RT3573/RT3593/RT3662) * RF5592 2.4G/5G 2T2R + * RF3070 2.4G 1T1R * RF5360 2.4G 1T1R * RF5370 2.4G 1T1R * RF5390 2.4G 1T1R @@ -70,6 +71,7 @@ #define RF3322 0x000c #define RF3053 0x000d #define RF5592 0x000f +#define RF3070 0x3070 #define RF3290 0x3290 #define RF5360 0x5360 #define RF5370 0x5370 diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index f414978..25aaa5e 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3152,6 +3152,7 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, case RF3322: rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); break; + case RF3070: case RF5360: case RF5370: case RF5372: @@ -3166,7 +3167,8 @@ static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); } - if (rt2x00_rf(rt2x00dev, RF3290) || + if (rt2x00_rf(rt2x00dev, RF3070) || + rt2x00_rf(rt2x00dev, RF3290) || rt2x00_rf(rt2x00dev, RF3322) || rt2x00_rf(rt2x00dev, RF5360) || rt2x00_rf(rt2x00dev, RF5370) || @@ -4272,6 +4274,7 @@ void rt2800_vco_calibration(struct rt2x00_dev *rt2x00dev) rt2800_rfcsr_write(rt2x00dev, 7, rfcsr); break; case RF3053: + case RF3070: case RF3290: case RF5360: case RF5370: @@ -7038,6 +7041,7 @@ static int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) case RF3022: case RF3052: case RF3053: + case RF3070: case RF3290: case RF3320: case RF3322: @@ -7560,6 +7564,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) rt2x00_rf(rt2x00dev, RF2020) || rt2x00_rf(rt2x00dev, RF3021) || rt2x00_rf(rt2x00dev, RF3022) || + rt2x00_rf(rt2x00dev, RF3070) || rt2x00_rf(rt2x00dev, RF3290) || rt2x00_rf(rt2x00dev, RF3320) || rt2x00_rf(rt2x00dev, RF3322) || @@ -7688,6 +7693,7 @@ static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) case RF3320: case RF3052: case RF3053: + case RF3070: case RF3290: case RF5360: case RF5370: -- cgit v0.10.2 From adb250b9d252be039c4dd49370fa2296d16ad035 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:42 -0500 Subject: rtlwifi: rtl8192du: Fix smatch errors in /rtl8192de/dm.c Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192de/dm.c drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1054 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'ofdm_index' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1056 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'ofdm_index' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1126 rtl92d_dm_txpower_tracking_callback_thermalmeter() debug: remove_pools: nr_children over 4000 (4596). (rtlpriv->dbg.global_debuglevel merged) drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1126 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1129 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1132 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1135 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1138 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1141 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1144 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1147 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch1ch13' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1151 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1154 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1157 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1160 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1163 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1166 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1169 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 drivers/net/wireless/rtlwifi/rtl8192de/dm.c:1172 rtl92d_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'cckswing_table_ch14' 33 <= 255 This patch fixes several off-by-one errors. It also removes a comment referencing variable 'noise' in the rts_stats struct. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c index f700f7a..7908e1c 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/dm.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/dm.c @@ -840,9 +840,9 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter( bool internal_pa = false; long ele_a = 0, ele_d, temp_cck, val_x, value32; long val_y, ele_c = 0; - u8 ofdm_index[2]; + u8 ofdm_index[3]; s8 cck_index = 0; - u8 ofdm_index_old[2] = {0, 0}; + u8 ofdm_index_old[3] = {0, 0, 0}; s8 cck_index_old = 0; u8 index; int i; @@ -1118,6 +1118,10 @@ static void rtl92d_dm_txpower_tracking_callback_thermalmeter( val_x, val_y, ele_a, ele_c, ele_d, val_x, val_y); + if (cck_index >= CCK_TABLE_SIZE) + cck_index = CCK_TABLE_SIZE - 1; + if (cck_index < 0) + cck_index = 0; if (rtlhal->current_bandtype == BAND_ON_2_4G) { /* Adjust CCK according to IQK result */ if (!rtlpriv->dm.cck_inch14) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index b8ec718..945ddec 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -526,7 +526,6 @@ bool rtl92de_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, } /*rx_status->qual = stats->signal; */ rx_status->signal = stats->rssi + 10; - /*rx_status->noise = -stats->noise; */ return true; } -- cgit v0.10.2 From 857c00773092ce9093e530581ff4bcb521477432 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:43 -0500 Subject: rtlwifi: rtl8192de: Fix smatch warnings in rtl8192de/hw.c Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192de/hw.c drivers/net/wireless/rtlwifi/rtl8192de/hw.c:1200 rtl92de_set_qos() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8192de/hw.c:1200 rtl92de_set_qos() info: ignoring unreachable code. The dead code is deleted. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c index 7dd8f6d..c4a7db9 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -1194,25 +1194,7 @@ void rtl92d_linked_set_reg(struct ieee80211_hw *hw) * mac80211 will send pkt when scan */ void rtl92de_set_qos(struct ieee80211_hw *hw, int aci) { - struct rtl_priv *rtlpriv = rtl_priv(hw); rtl92d_dm_init_edca_turbo(hw); - return; - switch (aci) { - case AC1_BK: - rtl_write_dword(rtlpriv, REG_EDCA_BK_PARAM, 0xa44f); - break; - case AC0_BE: - break; - case AC2_VI: - rtl_write_dword(rtlpriv, REG_EDCA_VI_PARAM, 0x5e4322); - break; - case AC3_VO: - rtl_write_dword(rtlpriv, REG_EDCA_VO_PARAM, 0x2f3222); - break; - default: - RT_ASSERT(false, "invalid aci: %d !\n", aci); - break; - } } void rtl92de_enable_interrupt(struct ieee80211_hw *hw) -- cgit v0.10.2 From 61800b276142760e59d719de8a63841cd717af9b Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:44 -0500 Subject: rtlwifi: rtl8192cu: Fix smatch warning in rtl8192cu/trx.c Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192cu/trx.c drivers/net/wireless/rtlwifi/rtl8192cu/trx.c:367 _rtl_rx_process() warn: assigning (-98) to unsigned variable 'stats.noise' This variable is unused, thus the initializer is removed, as well as a comment referring to that variable. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c index 763cf1d..04c7e57 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c @@ -349,7 +349,6 @@ bool rtl92cu_rx_query_desc(struct ieee80211_hw *hw, } /*rx_status->qual = stats->signal; */ rx_status->signal = stats->rssi + 10; - /*rx_status->noise = -stats->noise; */ return true; } @@ -364,7 +363,6 @@ static void _rtl_rx_process(struct ieee80211_hw *hw, struct sk_buff *skb) u8 *rxdesc; struct rtl_stats stats = { .signal = 0, - .noise = -98, .rate = 0, }; struct rx_fwinfo_92c *p_drvinfo; -- cgit v0.10.2 From d0df71dcd99935f58012d38b7287312935c44fbd Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:45 -0500 Subject: rtlwifi: rtl8192_common: Fix smatch errors and warnings in rtl8192c/dm_common.c Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:551 rtl92c_dm_pwdb_monitor() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:551 rtl92c_dm_pwdb_monitor() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:870 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:870 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:882 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:883 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:891 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c:892 rtl92c_dm_txpower_tracking_callback_thermalmeter() error: buffer overflow 'txpwr_level' 2 <= 2 The unreachable code message is fixed by deleting the code that follows a return. The errors are fixed by increasing the size of txpwr_level. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c index d2d57a2..e9caa5d 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c +++ b/drivers/net/wireless/rtlwifi/rtl8192c/dm_common.c @@ -541,29 +541,6 @@ EXPORT_SYMBOL(rtl92c_dm_write_dig); static void rtl92c_dm_pwdb_monitor(struct ieee80211_hw *hw) { - struct rtl_priv *rtlpriv = rtl_priv(hw); - long tmpentry_max_pwdb = 0, tmpentry_min_pwdb = 0xff; - - u8 h2c_parameter[3] = { 0 }; - - return; - - if (tmpentry_max_pwdb != 0) { - rtlpriv->dm.entry_max_undec_sm_pwdb = tmpentry_max_pwdb; - } else { - rtlpriv->dm.entry_max_undec_sm_pwdb = 0; - } - - if (tmpentry_min_pwdb != 0xff) { - rtlpriv->dm.entry_min_undec_sm_pwdb = tmpentry_min_pwdb; - } else { - rtlpriv->dm.entry_min_undec_sm_pwdb = 0; - } - - h2c_parameter[2] = (u8) (rtlpriv->dm.undec_sm_pwdb & 0xFF); - h2c_parameter[0] = 0; - - rtl92c_fill_h2c_cmd(hw, H2C_RSSI_REPORT, 3, h2c_parameter); } void rtl92c_dm_init_edca_turbo(struct ieee80211_hw *hw) @@ -673,7 +650,7 @@ static void rtl92c_dm_txpower_tracking_callback_thermalmeter(struct ieee80211_hw s8 cck_index = 0; int i; bool is2t = IS_92C_SERIAL(rtlhal->version); - s8 txpwr_level[2] = {0, 0}; + s8 txpwr_level[3] = {0, 0, 0}; u8 ofdm_min_index = 6, rf; rtlpriv->dm.txpower_trackinginit = true; -- cgit v0.10.2 From a3557d4d485322ebc60ca7f11616695c5dd69383 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:46 -0500 Subject: rtlwifi: Fix smatch warning in pci.c Smatch reports the following: CHECK drivers/net/wireless/rtlwifi/pci.c drivers/net/wireless/rtlwifi/pci.c:739 _rtl_pci_rx_interrupt() warn: assigning (-98) to unsigned variable 'stats.noise' The variable 'stats.noise' is not used. That initializer is removed. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/pci.c b/drivers/net/wireless/rtlwifi/pci.c index 2b6d3e0..0f49444 100644 --- a/drivers/net/wireless/rtlwifi/pci.c +++ b/drivers/net/wireless/rtlwifi/pci.c @@ -736,7 +736,6 @@ static void _rtl_pci_rx_interrupt(struct ieee80211_hw *hw) struct rtl_stats stats = { .signal = 0, - .noise = -98, .rate = 0, }; int index = rtlpci->rx_ring[rx_queue_idx].idx; -- cgit v0.10.2 From 354d0f3c40fb40193213e40f3177ff528798ca8d Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:47 -0500 Subject: rtlwifi: Fix smatch warnings in usb.c Smatch displays the following: CHECK drivers/net/wireless/rtlwifi/usb.c drivers/net/wireless/rtlwifi/usb.c:458 _rtl_usb_rx_process_agg() warn: assigning (-98) to unsigned variable 'stats.noise' drivers/net/wireless/rtlwifi/usb.c:503 _rtl_usb_rx_process_noagg() warn: assigning (-98) to unsigned variable 'stats.noise' drivers/net/wireless/rtlwifi/usb.c:596 _rtl_rx_get_padding() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/usb.c:596 _rtl_rx_get_padding() info: ignoring unreachable code. The variable 'stats.noise' is not used, thus the initializers are removed. The unreachable code info is fixed by including the appropriate section inside #ifdef .. #endif constructions. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index e56778c..6e2b5c5 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -455,7 +455,6 @@ static void _rtl_usb_rx_process_agg(struct ieee80211_hw *hw, struct ieee80211_rx_status rx_status = {0}; struct rtl_stats stats = { .signal = 0, - .noise = -98, .rate = 0, }; @@ -498,7 +497,6 @@ static void _rtl_usb_rx_process_noagg(struct ieee80211_hw *hw, struct ieee80211_rx_status rx_status = {0}; struct rtl_stats stats = { .signal = 0, - .noise = -98, .rate = 0, }; @@ -582,12 +580,15 @@ static void _rtl_rx_work(unsigned long param) static unsigned int _rtl_rx_get_padding(struct ieee80211_hdr *hdr, unsigned int len) { +#if NET_IP_ALIGN != 0 unsigned int padding = 0; +#endif /* make function no-op when possible */ if (NET_IP_ALIGN == 0 || len < sizeof(*hdr)) return 0; +#if NET_IP_ALIGN != 0 /* alignment calculation as in lbtf_rx() / carl9170_rx_copy_data() */ /* TODO: deduplicate common code, define helper function instead? */ @@ -608,6 +609,7 @@ static unsigned int _rtl_rx_get_padding(struct ieee80211_hdr *hdr, padding ^= NET_IP_ALIGN; return padding; +#endif } #define __RADIO_TAP_SIZE_RSV 32 -- cgit v0.10.2 From dab3df5e88b979f8d09860f873ccfaa7a55758d2 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:48 -0500 Subject: rtlwifi: rtl8188ee: Fix smatch warning in rtl8188ee/hw.c Smatch lists the following: CHECK drivers/net/wireless/rtlwifi/rtl8188ee/hw.c drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:149 _rtl88ee_set_fw_clock_on() info: ignoring unreachable code. drivers/net/wireless/rtlwifi/rtl8188ee/hw.c:149 _rtl88ee_set_fw_clock_on() info: ignoring unreachable code. This info message is the result of a real error due to a missing break statement in a "while (1)" loop. Signed-off-by: Larry Finger Cc: Stable [3.10+] Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c index b68cae3..e06971b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/hw.c @@ -143,6 +143,7 @@ static void _rtl88ee_set_fw_clock_on(struct ieee80211_hw *hw, } else { rtlhal->fw_clk_change_in_progress = false; spin_unlock_bh(&rtlpriv->locks.fw_ps_lock); + break; } } -- cgit v0.10.2 From c6d372998415f3c4bc45737b63bbed6d82b2d956 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Wed, 25 Sep 2013 12:57:49 -0500 Subject: rtlwifi: Remove all remaining references to variable 'noise' in rtl_stats struct This completes removal of all places that reference variable 'noise' in the rtl_stats struct. The definition of the struct is unchanged. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c index 68685a8..aece6c9 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/trx.c @@ -478,7 +478,6 @@ bool rtl88ee_rx_query_desc(struct ieee80211_hw *hw, /*rx_status->qual = status->signal; */ rx_status->signal = status->recvsignalpower + 10; - /*rx_status->noise = -status->noise; */ if (status->packet_report_type == TX_REPORT2) { status->macid_valid_entry[0] = GET_RX_RPT2_DESC_MACID_VALID_1(pdesc); diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index 6ad23b4..52abf0a 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -420,7 +420,6 @@ bool rtl92ce_rx_query_desc(struct ieee80211_hw *hw, /*rx_status->qual = stats->signal; */ rx_status->signal = stats->recvsignalpower + 10; - /*rx_status->noise = -stats->noise; */ return true; } diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index c709511..222d2e7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -330,7 +330,6 @@ bool rtl92se_rx_query_desc(struct ieee80211_hw *hw, struct rtl_stats *stats, /*rx_status->qual = stats->signal; */ rx_status->signal = stats->rssi + 10; - /*rx_status->noise = -stats->noise; */ return true; } diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index bcd82a1..50b7be3 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -359,7 +359,6 @@ bool rtl8723ae_rx_query_desc(struct ieee80211_hw *hw, /*rx_status->qual = status->signal; */ rx_status->signal = status->recvsignalpower + 10; - /*rx_status->noise = -status->noise; */ return true; } -- cgit v0.10.2 From 4f4826da8cae59c167fc730b5db6f0659c2d37ce Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:25:27 -0500 Subject: rtlwifi: Implement a common rtl_phy_scan_operation_backup() routine Several of the drivers supported by rtlwifi individually implement the same routine that supports scans. As a first step, create this routine in driver rtlwifi. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 8bb4a9a..9a78e3d 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -1613,6 +1613,35 @@ err_free: } EXPORT_SYMBOL(rtl_send_smps_action); +void rtl_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation) +{ + struct rtl_priv *rtlpriv = rtl_priv(hw); + struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); + enum io_type iotype; + + if (!is_hal_stop(rtlhal)) { + switch (operation) { + case SCAN_OPT_BACKUP: + iotype = IO_CMD_PAUSE_DM_BY_SCAN; + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_IO_CMD, + (u8 *)&iotype); + break; + case SCAN_OPT_RESTORE: + iotype = IO_CMD_RESUME_DM_BY_SCAN; + rtlpriv->cfg->ops->set_hw_reg(hw, + HW_VAR_IO_CMD, + (u8 *)&iotype); + break; + default: + RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, + "Unknown Scan Backup operation.\n"); + break; + } + } +} +EXPORT_SYMBOL(rtl_phy_scan_operation_backup); + /* There seem to be issues in mac80211 regarding when del ba frames can be * received. As a work around, we make a fake del_ba if we receive a ba_req; * however, rx_agg was opened to let mac80211 release some ba related diff --git a/drivers/net/wireless/rtlwifi/base.h b/drivers/net/wireless/rtlwifi/base.h index c07f114..0cd0742 100644 --- a/drivers/net/wireless/rtlwifi/base.h +++ b/drivers/net/wireless/rtlwifi/base.h @@ -152,5 +152,6 @@ int rtlwifi_rate_mapping(struct ieee80211_hw *hw, bool rtl_tx_mgmt_proc(struct ieee80211_hw *hw, struct sk_buff *skb); struct sk_buff *rtl_make_del_ba(struct ieee80211_hw *hw, u8 *sa, u8 *bssid, u16 tid); +void rtl_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation); #endif -- cgit v0.10.2 From 5784935dd7d308f15d8600536cfffae9813f16ff Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:25:28 -0500 Subject: rtlwifi: rtl8192cu: Convert to use new rtl_phy_scan_operation_backup() routine Now that the routine exists in driver rtlwifi, convert rtl8192cu to use it. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c index 2bd5985..9936de7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/sw.c @@ -31,6 +31,7 @@ #include "../core.h" #include "../usb.h" #include "../efuse.h" +#include "../base.h" #include "reg.h" #include "def.h" #include "phy.h" @@ -117,7 +118,7 @@ static struct rtl_hal_ops rtl8192cu_hal_ops = { .set_bw_mode = rtl92c_phy_set_bw_mode, .switch_channel = rtl92c_phy_sw_chnl, .dm_watchdog = rtl92c_dm_watchdog, - .scan_operation_backup = rtl92c_phy_scan_operation_backup, + .scan_operation_backup = rtl_phy_scan_operation_backup, .set_rf_power_state = rtl92cu_phy_set_rf_power_state, .led_control = rtl92cu_led_control, .enable_hw_sec = rtl92cu_enable_hw_security_config, -- cgit v0.10.2 From 3764eb72a514cad27ab09fa0b8e591b2b8b7a70b Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:25:29 -0500 Subject: rtlwifi: rtl8192ce: Convert driver to use new rtl_phy_scan_operation_backup() routine Now that rtl_phy_scan_operation_backup() exists, convert rtl8192ce to use it. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h index 80a0893..aeb268b 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/phy.h @@ -207,8 +207,6 @@ void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw, void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel); bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw, long power_indbm); -void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw, - u8 operation); void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw, enum nl80211_channel_type ch_type); void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw); diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c index 1420356..b790320 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/sw.c @@ -30,6 +30,7 @@ #include "../wifi.h" #include "../core.h" #include "../pci.h" +#include "../base.h" #include "reg.h" #include "def.h" #include "phy.h" @@ -219,7 +220,7 @@ static struct rtl_hal_ops rtl8192ce_hal_ops = { .set_bw_mode = rtl92c_phy_set_bw_mode, .switch_channel = rtl92c_phy_sw_chnl, .dm_watchdog = rtl92c_dm_watchdog, - .scan_operation_backup = rtl92c_phy_scan_operation_backup, + .scan_operation_backup = rtl_phy_scan_operation_backup, .set_rf_power_state = rtl92c_phy_set_rf_power_state, .led_control = rtl92ce_led_control, .set_desc = rtl92ce_set_desc, -- cgit v0.10.2 From 0d1cdce2f555c9d52e7dfcd85fa15736e79aed56 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:25:30 -0500 Subject: rtlwifi: rtl8192c: Remove rtl8192c_phy_scan_operation_backup() Drivers rtl8192ce and rtl8192cu no longer rely on this routine. It is removed. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c index 246e535..0c0e782 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c +++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.c @@ -592,36 +592,6 @@ long _rtl92c_phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw, } EXPORT_SYMBOL(_rtl92c_phy_txpwr_idx_to_dbm); -void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - enum io_type iotype; - - if (!is_hal_stop(rtlhal)) { - switch (operation) { - case SCAN_OPT_BACKUP: - iotype = IO_CMD_PAUSE_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_IO_CMD, - (u8 *)&iotype); - - break; - case SCAN_OPT_RESTORE: - iotype = IO_CMD_RESUME_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_IO_CMD, - (u8 *)&iotype); - break; - default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Unknown Scan Backup operation\n"); - break; - } - } -} -EXPORT_SYMBOL(rtl92c_phy_scan_operation_backup); - void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw, enum nl80211_channel_type ch_type) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h index 24957e2..e79dabe 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h +++ b/drivers/net/wireless/rtlwifi/rtl8192c/phy_common.h @@ -203,8 +203,6 @@ void rtl92c_phy_get_txpower_level(struct ieee80211_hw *hw, void rtl92c_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel); bool rtl92c_phy_update_txpower_dbm(struct ieee80211_hw *hw, long power_indbm); -void rtl92c_phy_scan_operation_backup(struct ieee80211_hw *hw, - u8 operation); void rtl92c_phy_set_bw_mode(struct ieee80211_hw *hw, enum nl80211_channel_type ch_type); void rtl92c_phy_sw_chnl_callback(struct ieee80211_hw *hw); -- cgit v0.10.2 From 6483033ad8b5bbc1d2c9cd6556b6c35a563409ae Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:25:31 -0500 Subject: rtlwifi: rtl8192ce: Convert driver to use new rtl_phy_scan_operation_backup() routine Now that rtl_phy_scan_operation_backup() exists, convert rtl8192de to use it. Routine rtl92d_phy_scan_operation_backup() is no longer used and is removed. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c index 840bac5..13196cc 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.c @@ -1022,34 +1022,6 @@ void rtl92d_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel) rtl92d_phy_rf6052_set_ofdm_txpower(hw, &ofdmpowerlevel[0], channel); } -void rtl92d_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - enum io_type iotype; - - if (!is_hal_stop(rtlhal)) { - switch (operation) { - case SCAN_OPT_BACKUP: - rtlhal->current_bandtypebackup = - rtlhal->current_bandtype; - iotype = IO_CMD_PAUSE_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_IO_CMD, - (u8 *)&iotype); - break; - case SCAN_OPT_RESTORE: - iotype = IO_CMD_RESUME_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_IO_CMD, - (u8 *)&iotype); - break; - default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Unknown Scan Backup operation\n"); - break; - } - } -} - void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw, enum nl80211_channel_type ch_type) { diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/phy.h b/drivers/net/wireless/rtlwifi/rtl8192de/phy.h index a66232e..bef3040 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/phy.h +++ b/drivers/net/wireless/rtlwifi/rtl8192de/phy.h @@ -142,8 +142,6 @@ extern bool rtl92c_phy_config_rf_with_feaderfile(struct ieee80211_hw *hw, enum radio_path rfpath); extern void rtl92d_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw); extern void rtl92d_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel); -extern void rtl92d_phy_scan_operation_backup(struct ieee80211_hw *hw, - u8 operation); extern void rtl92d_phy_set_bw_mode(struct ieee80211_hw *hw, enum nl80211_channel_type ch_type); extern u8 rtl92d_phy_sw_chnl(struct ieee80211_hw *hw); diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c index c18c04b..edab5a5 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/sw.c @@ -30,6 +30,7 @@ #include "../wifi.h" #include "../core.h" #include "../pci.h" +#include "../base.h" #include "reg.h" #include "def.h" #include "phy.h" @@ -236,7 +237,7 @@ static struct rtl_hal_ops rtl8192de_hal_ops = { .set_bw_mode = rtl92d_phy_set_bw_mode, .switch_channel = rtl92d_phy_sw_chnl, .dm_watchdog = rtl92d_dm_watchdog, - .scan_operation_backup = rtl92d_phy_scan_operation_backup, + .scan_operation_backup = rtl_phy_scan_operation_backup, .set_rf_power_state = rtl92d_phy_set_rf_power_state, .led_control = rtl92de_led_control, .set_desc = rtl92de_set_desc, -- cgit v0.10.2 From 3fc0165657592e98a957f348711209dd2c6c4f1c Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:25:32 -0500 Subject: rtlwifi: rtl8723ae: Convert driver to use new rtl_phy_scan_operation_backup() routine Now that rtl_phy_scan_operation_backup() exists, convert rtl8723ae to use it. Routine rtl8723ae_phy_scan_operation_backup() is no longer used and is removed. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c index eafbb18..5d318a8 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.c @@ -934,35 +934,6 @@ static long _phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw, return pwrout_dbm; } -void rtl8723ae_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - enum io_type iotype; - - if (!is_hal_stop(rtlhal)) { - switch (operation) { - case SCAN_OPT_BACKUP: - iotype = IO_CMD_PAUSE_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_IO_CMD, - (u8 *)&iotype); - - break; - case SCAN_OPT_RESTORE: - iotype = IO_CMD_RESUME_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_IO_CMD, - (u8 *)&iotype); - break; - default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Unknown Scan Backup operation.\n"); - break; - } - } -} - void rtl8723ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h index e7a59eb..3d8f9e3 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/phy.h @@ -205,8 +205,6 @@ extern void rtl8723ae_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel); extern bool rtl8723ae_phy_update_txpower_dbm(struct ieee80211_hw *hw, long power_indbm); -extern void rtl8723ae_phy_scan_operation_backup(struct ieee80211_hw *hw, - u8 operation); extern void rtl8723ae_phy_set_bw_mode_callback(struct ieee80211_hw *hw); extern void rtl8723ae_phy_set_bw_mode(struct ieee80211_hw *hw, enum nl80211_channel_type ch_type); diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c index d9ee2ef..62b204f 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/sw.c @@ -33,6 +33,7 @@ #include "../core.h" #include "../pci.h" +#include "../base.h" #include "reg.h" #include "def.h" #include "phy.h" @@ -220,7 +221,7 @@ static struct rtl_hal_ops rtl8723ae_hal_ops = { .set_bw_mode = rtl8723ae_phy_set_bw_mode, .switch_channel = rtl8723ae_phy_sw_chnl, .dm_watchdog = rtl8723ae_dm_watchdog, - .scan_operation_backup = rtl8723ae_phy_scan_operation_backup, + .scan_operation_backup = rtl_phy_scan_operation_backup, .set_rf_power_state = rtl8723ae_phy_set_rf_power_state, .led_control = rtl8723ae_led_control, .set_desc = rtl8723ae_set_desc, -- cgit v0.10.2 From d41200ad5fc6c283c8c375f52e4f8699c0eeec61 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Thu, 26 Sep 2013 13:25:33 -0500 Subject: rtlwifi: rtl8188ee: Convert driver to use new rtl_phy_scan_operation_backup() routine Now that rtl_phy_scan_operation_backup() exists, convert rtl8188ee to use it. Routine rtl88e_phy_scan_operation_backup() is no longer used and is removed. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c index e655c04..d67f9c7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.c @@ -1136,34 +1136,6 @@ void rtl88e_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel) &bw40_pwr[0], channel); } -void rtl88e_phy_scan_operation_backup(struct ieee80211_hw *hw, u8 operation) -{ - struct rtl_priv *rtlpriv = rtl_priv(hw); - struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - enum io_type iotype; - - if (!is_hal_stop(rtlhal)) { - switch (operation) { - case SCAN_OPT_BACKUP: - iotype = IO_CMD_PAUSE_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_IO_CMD, - (u8 *)&iotype); - break; - case SCAN_OPT_RESTORE: - iotype = IO_CMD_RESUME_DM_BY_SCAN; - rtlpriv->cfg->ops->set_hw_reg(hw, - HW_VAR_IO_CMD, - (u8 *)&iotype); - break; - default: - RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, - "Unknown Scan Backup operation.\n"); - break; - } - } -} - void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw) { struct rtl_priv *rtlpriv = rtl_priv(hw); diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h index f1acd6d..d4545f0 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/phy.h @@ -217,8 +217,6 @@ extern void rtl88e_phy_get_hw_reg_originalvalue(struct ieee80211_hw *hw); extern void rtl88e_phy_get_txpower_level(struct ieee80211_hw *hw, long *powerlevel); extern void rtl88e_phy_set_txpower_level(struct ieee80211_hw *hw, u8 channel); -extern void rtl88e_phy_scan_operation_backup(struct ieee80211_hw *hw, - u8 operation); extern void rtl88e_phy_set_bw_mode_callback(struct ieee80211_hw *hw); extern void rtl88e_phy_set_bw_mode(struct ieee80211_hw *hw, enum nl80211_channel_type ch_type); diff --git a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c index c254693..347af1e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c +++ b/drivers/net/wireless/rtlwifi/rtl8188ee/sw.c @@ -30,6 +30,7 @@ #include "../wifi.h" #include "../core.h" #include "../pci.h" +#include "../base.h" #include "reg.h" #include "def.h" #include "phy.h" @@ -244,7 +245,7 @@ static struct rtl_hal_ops rtl8188ee_hal_ops = { .set_bw_mode = rtl88e_phy_set_bw_mode, .switch_channel = rtl88e_phy_sw_chnl, .dm_watchdog = rtl88e_dm_watchdog, - .scan_operation_backup = rtl88e_phy_scan_operation_backup, + .scan_operation_backup = rtl_phy_scan_operation_backup, .set_rf_power_state = rtl88e_phy_set_rf_power_state, .led_control = rtl88ee_led_control, .set_desc = rtl88ee_set_desc, -- cgit v0.10.2 From 274dede8c52036a1849ea970fab8d185fb0dce2b Mon Sep 17 00:00:00 2001 From: Xose Vazquez Perez Date: Sat, 28 Sep 2013 13:07:10 +0200 Subject: wireless: rt2x00: rt2800usb: add new devices 0411,0241 RT5572 BUFFALO WI-U2-300D Wireless LAN Adapter 0789,0170 RT3572 Logitec LAN-W300AN/U2 0846,9013 RT3573 NETGEAR Adaptador USB Inalambrico Movistar 0df6,006e RT3573 Sitecom WiFi USB adapter N900 2001,3c1f RT3573 D-Link DWA-162 Wireless N900 Dual Band Adapter 2001,3c20 RT5372 D-Link DWA-140 Wireless N USB Adapter(rev.D) 2001,3c21 RT5572 D-Link DWA-160 Xtreme N Dual Band USB Adapter(rev.C) 2001,3c22 RT5372 D-Link DWA-132 Wireless N USB Adapter(rev.B) 2001,3c23 RT5372 D-Link GO-USB-N300 Wireless N Easy USB Adapter 2019,ab29 ? Planex GW-USMirco300 20f4,724a RT5572 TRENDnet N600 Wireless Dual Band USB Adapter Cc: Ivo van Doorn Cc: Gertjan van Wingerde Cc: Helmut Schaa Cc: John W. Linville Cc: users@rt2x00.serialmonkey.com Cc: linux-wireless@vger.kernel.org Signed-off-by: Xose Vazquez Perez Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2800usb.c b/drivers/net/wireless/rt2x00/rt2800usb.c index 96961b9..96677ce5 100644 --- a/drivers/net/wireless/rt2x00/rt2800usb.c +++ b/drivers/net/wireless/rt2x00/rt2800usb.c @@ -1176,6 +1176,8 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Linksys */ { USB_DEVICE(0x13b1, 0x002f) }, { USB_DEVICE(0x1737, 0x0079) }, + /* Logitec */ + { USB_DEVICE(0x0789, 0x0170) }, /* Ralink */ { USB_DEVICE(0x148f, 0x3572) }, /* Sitecom */ @@ -1199,6 +1201,8 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x050d, 0x1103) }, /* Cameo */ { USB_DEVICE(0x148f, 0xf301) }, + /* D-Link */ + { USB_DEVICE(0x2001, 0x3c1f) }, /* Edimax */ { USB_DEVICE(0x7392, 0x7733) }, /* Hawking */ @@ -1212,6 +1216,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x0789, 0x016b) }, /* NETGEAR */ { USB_DEVICE(0x0846, 0x9012) }, + { USB_DEVICE(0x0846, 0x9013) }, { USB_DEVICE(0x0846, 0x9019) }, /* Planex */ { USB_DEVICE(0x2019, 0xed19) }, @@ -1220,6 +1225,7 @@ static struct usb_device_id rt2800usb_device_table[] = { /* Sitecom */ { USB_DEVICE(0x0df6, 0x0067) }, { USB_DEVICE(0x0df6, 0x006a) }, + { USB_DEVICE(0x0df6, 0x006e) }, /* ZyXEL */ { USB_DEVICE(0x0586, 0x3421) }, #endif @@ -1236,6 +1242,9 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x2001, 0x3c1c) }, { USB_DEVICE(0x2001, 0x3c1d) }, { USB_DEVICE(0x2001, 0x3c1e) }, + { USB_DEVICE(0x2001, 0x3c20) }, + { USB_DEVICE(0x2001, 0x3c22) }, + { USB_DEVICE(0x2001, 0x3c23) }, /* LG innotek */ { USB_DEVICE(0x043e, 0x7a22) }, { USB_DEVICE(0x043e, 0x7a42) }, @@ -1258,12 +1267,17 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x043e, 0x7a32) }, /* AVM GmbH */ { USB_DEVICE(0x057c, 0x8501) }, - /* D-Link DWA-160-B2 */ + /* Buffalo */ + { USB_DEVICE(0x0411, 0x0241) }, + /* D-Link */ { USB_DEVICE(0x2001, 0x3c1a) }, + { USB_DEVICE(0x2001, 0x3c21) }, /* Proware */ { USB_DEVICE(0x043e, 0x7a13) }, /* Ralink */ { USB_DEVICE(0x148f, 0x5572) }, + /* TRENDnet */ + { USB_DEVICE(0x20f4, 0x724a) }, #endif #ifdef CONFIG_RT2800USB_UNKNOWN /* @@ -1333,6 +1347,7 @@ static struct usb_device_id rt2800usb_device_table[] = { { USB_DEVICE(0x1d4d, 0x0010) }, /* Planex */ { USB_DEVICE(0x2019, 0xab24) }, + { USB_DEVICE(0x2019, 0xab29) }, /* Qcom */ { USB_DEVICE(0x18e8, 0x6259) }, /* RadioShack */ -- cgit v0.10.2