From ea4f3111ef0daffa1d11fded6f375227febca458 Mon Sep 17 00:00:00 2001
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Date: Thu, 22 Nov 2012 13:11:32 +0100
Subject: viafb: rename display_timing to via_display_timing

The struct display_timing is specific to the via subsystem. The naming leads to
collisions with the new struct display_timing, which is supposed to be a shared
struct between different subsystems.
To clean this up, prepend the existing struct with the subsystem it is specific
to.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>

diff --git a/drivers/video/via/hw.c b/drivers/video/via/hw.c
index 80233da..22450908 100644
--- a/drivers/video/via/hw.c
+++ b/drivers/video/via/hw.c
@@ -1467,10 +1467,10 @@ void viafb_set_vclock(u32 clk, int set_iga)
 	via_write_misc_reg_mask(0x0C, 0x0C); /* select external clock */
 }
 
-struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
+struct via_display_timing var_to_timing(const struct fb_var_screeninfo *var,
 	u16 cxres, u16 cyres)
 {
-	struct display_timing timing;
+	struct via_display_timing timing;
 	u16 dx = (var->xres - cxres) / 2, dy = (var->yres - cyres) / 2;
 
 	timing.hor_addr = cxres;
@@ -1491,7 +1491,7 @@ struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
 void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
 	u16 cxres, u16 cyres, int iga)
 {
-	struct display_timing crt_reg = var_to_timing(var,
+	struct via_display_timing crt_reg = var_to_timing(var,
 		cxres ? cxres : var->xres, cyres ? cyres : var->yres);
 
 	if (iga == IGA1)
diff --git a/drivers/video/via/hw.h b/drivers/video/via/hw.h
index a820575..3be073c 100644
--- a/drivers/video/via/hw.h
+++ b/drivers/video/via/hw.h
@@ -637,7 +637,7 @@ extern int viafb_LCD_ON;
 extern int viafb_DVI_ON;
 extern int viafb_hotplug;
 
-struct display_timing var_to_timing(const struct fb_var_screeninfo *var,
+struct via_display_timing var_to_timing(const struct fb_var_screeninfo *var,
 	u16 cxres, u16 cyres);
 void viafb_fill_crtc_timing(const struct fb_var_screeninfo *var,
 	u16 cxres, u16 cyres, int iga);
diff --git a/drivers/video/via/lcd.c b/drivers/video/via/lcd.c
index 980ee1b..5d21ff4 100644
--- a/drivers/video/via/lcd.c
+++ b/drivers/video/via/lcd.c
@@ -549,7 +549,7 @@ void viafb_lcd_set_mode(const struct fb_var_screeninfo *var, u16 cxres,
 	int panel_hres = plvds_setting_info->lcd_panel_hres;
 	int panel_vres = plvds_setting_info->lcd_panel_vres;
 	u32 clock;
-	struct display_timing timing;
+	struct via_display_timing timing;
 	struct fb_var_screeninfo panel_var;
 	const struct fb_videomode *mode_crt_table, *panel_crt_table;
 
diff --git a/drivers/video/via/share.h b/drivers/video/via/share.h
index 3158dfc..65c65c6 100644
--- a/drivers/video/via/share.h
+++ b/drivers/video/via/share.h
@@ -319,7 +319,7 @@ struct crt_mode_table {
 	int refresh_rate;
 	int h_sync_polarity;
 	int v_sync_polarity;
-	struct display_timing crtc;
+	struct via_display_timing crtc;
 };
 
 struct io_reg {
diff --git a/drivers/video/via/via_modesetting.c b/drivers/video/via/via_modesetting.c
index 0e431ae..0b414b0 100644
--- a/drivers/video/via/via_modesetting.c
+++ b/drivers/video/via/via_modesetting.c
@@ -30,9 +30,9 @@
 #include "debug.h"
 
 
-void via_set_primary_timing(const struct display_timing *timing)
+void via_set_primary_timing(const struct via_display_timing *timing)
 {
-	struct display_timing raw;
+	struct via_display_timing raw;
 
 	raw.hor_total = timing->hor_total / 8 - 5;
 	raw.hor_addr = timing->hor_addr / 8 - 1;
@@ -88,9 +88,9 @@ void via_set_primary_timing(const struct display_timing *timing)
 	via_write_reg_mask(VIACR, 0x17, 0x80, 0x80);
 }
 
-void via_set_secondary_timing(const struct display_timing *timing)
+void via_set_secondary_timing(const struct via_display_timing *timing)
 {
-	struct display_timing raw;
+	struct via_display_timing raw;
 
 	raw.hor_total = timing->hor_total - 1;
 	raw.hor_addr = timing->hor_addr - 1;
diff --git a/drivers/video/via/via_modesetting.h b/drivers/video/via/via_modesetting.h
index 06e09fe..f6a6503 100644
--- a/drivers/video/via/via_modesetting.h
+++ b/drivers/video/via/via_modesetting.h
@@ -33,7 +33,7 @@
 #define VIA_PITCH_MAX	0x3FF8
 
 
-struct display_timing {
+struct via_display_timing {
 	u16 hor_total;
 	u16 hor_addr;
 	u16 hor_blank_start;
@@ -49,8 +49,8 @@ struct display_timing {
 };
 
 
-void via_set_primary_timing(const struct display_timing *timing);
-void via_set_secondary_timing(const struct display_timing *timing);
+void via_set_primary_timing(const struct via_display_timing *timing);
+void via_set_secondary_timing(const struct via_display_timing *timing);
 void via_set_primary_address(u32 addr);
 void via_set_secondary_address(u32 addr);
 void via_set_primary_pitch(u32 pitch);
-- 
cgit v0.10.2


From 8714c0cecfc28f7ce73a520be4831f09743c4fd7 Mon Sep 17 00:00:00 2001
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Date: Mon, 17 Dec 2012 14:20:17 +0100
Subject: video: add display_timing and videomode

Add display_timing structure and the according helper functions. This allows
the description of a display via its supported timing parameters.

Also, add helper functions to convert from display timings to a generic videomode
structure.

The struct display_timing specifies all needed parameters to describe the signal
properties of a display in one mode. This includes
    - ranges for signals that may have min-, max- and typical values
    - single integers for signals that can be on, off or are ignored
    - booleans for signals that are either on or off

As a display may support multiple modes like this, a struct display_timings is
added, that holds all given struct display_timing pointers and declares the
native mode of the display.

Although a display may state that a signal can be in a range, it is driven with
fixed values that indicate a videomode. Therefore graphic drivers don't need all
the information of struct display_timing, but would generate a videomode from
the given set of supported signal timings and work with that.

The video subsystems all define their own structs that describe a mode and work
with that (e.g. fb_videomode or drm_display_mode). To slowly replace all those
various structures and allow code reuse across those subsystems, add struct
videomode as a generic description.

This patch only includes the most basic fields in struct videomode. All missing
fields that are needed to have a really generic video mode description can be
added at a later stage.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Afzal Mohammed <Afzal@ti.com>
Tested-by: Rob Clark <robclark@gmail.com>
Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index e7068c5..09a8f0d 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -33,6 +33,12 @@ config VIDEO_OUTPUT_CONTROL
 	  This framework adds support for low-level control of the video 
 	  output switch.
 
+config DISPLAY_TIMING
+       bool
+
+config VIDEOMODE
+       bool
+
 menuconfig FB
 	tristate "Support for frame buffer devices"
 	---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 768a137..e0dd820 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -168,3 +168,5 @@ obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
 
 #video output switch sysfs driver
 obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
+obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o
+obj-$(CONFIG_VIDEOMODE) += videomode.o
diff --git a/drivers/video/display_timing.c b/drivers/video/display_timing.c
new file mode 100644
index 0000000..5e1822c
--- /dev/null
+++ b/drivers/video/display_timing.c
@@ -0,0 +1,24 @@
+/*
+ * generic display timing functions
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/export.h>
+#include <linux/slab.h>
+#include <video/display_timing.h>
+
+void display_timings_release(struct display_timings *disp)
+{
+	if (disp->timings) {
+		unsigned int i;
+
+		for (i = 0; i < disp->num_timings; i++)
+			kfree(disp->timings[i]);
+		kfree(disp->timings);
+	}
+	kfree(disp);
+}
+EXPORT_SYMBOL_GPL(display_timings_release);
diff --git a/drivers/video/videomode.c b/drivers/video/videomode.c
new file mode 100644
index 0000000..21c47a2
--- /dev/null
+++ b/drivers/video/videomode.c
@@ -0,0 +1,39 @@
+/*
+ * generic display timing functions
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * This file is released under the GPLv2
+ */
+
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <video/display_timing.h>
+#include <video/videomode.h>
+
+int videomode_from_timing(const struct display_timings *disp,
+			  struct videomode *vm, unsigned int index)
+{
+	struct display_timing *dt;
+
+	dt = display_timings_get(disp, index);
+	if (!dt)
+		return -EINVAL;
+
+	vm->pixelclock = display_timing_get_value(&dt->pixelclock, TE_TYP);
+	vm->hactive = display_timing_get_value(&dt->hactive, TE_TYP);
+	vm->hfront_porch = display_timing_get_value(&dt->hfront_porch, TE_TYP);
+	vm->hback_porch = display_timing_get_value(&dt->hback_porch, TE_TYP);
+	vm->hsync_len = display_timing_get_value(&dt->hsync_len, TE_TYP);
+
+	vm->vactive = display_timing_get_value(&dt->vactive, TE_TYP);
+	vm->vfront_porch = display_timing_get_value(&dt->vfront_porch, TE_TYP);
+	vm->vback_porch = display_timing_get_value(&dt->vback_porch, TE_TYP);
+	vm->vsync_len = display_timing_get_value(&dt->vsync_len, TE_TYP);
+
+	vm->dmt_flags = dt->dmt_flags;
+	vm->data_flags = dt->data_flags;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(videomode_from_timing);
diff --git a/include/video/display_timing.h b/include/video/display_timing.h
new file mode 100644
index 0000000..71e9a38
--- /dev/null
+++ b/include/video/display_timing.h
@@ -0,0 +1,124 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * description of display timings
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_DISPLAY_TIMING_H
+#define __LINUX_DISPLAY_TIMING_H
+
+#include <linux/bitops.h>
+#include <linux/types.h>
+
+/* VESA display monitor timing parameters */
+#define VESA_DMT_HSYNC_LOW		BIT(0)
+#define VESA_DMT_HSYNC_HIGH		BIT(1)
+#define VESA_DMT_VSYNC_LOW		BIT(2)
+#define VESA_DMT_VSYNC_HIGH		BIT(3)
+
+/* display specific flags */
+#define DISPLAY_FLAGS_DE_LOW		BIT(0)	/* data enable flag */
+#define DISPLAY_FLAGS_DE_HIGH		BIT(1)
+#define DISPLAY_FLAGS_PIXDATA_POSEDGE	BIT(2)	/* drive data on pos. edge */
+#define DISPLAY_FLAGS_PIXDATA_NEGEDGE	BIT(3)	/* drive data on neg. edge */
+#define DISPLAY_FLAGS_INTERLACED	BIT(4)
+#define DISPLAY_FLAGS_DOUBLESCAN	BIT(5)
+
+/*
+ * A single signal can be specified via a range of minimal and maximal values
+ * with a typical value, that lies somewhere inbetween.
+ */
+struct timing_entry {
+	u32 min;
+	u32 typ;
+	u32 max;
+};
+
+enum timing_entry_index {
+	TE_MIN = 0,
+	TE_TYP = 1,
+	TE_MAX = 2,
+};
+
+/*
+ * Single "mode" entry. This describes one set of signal timings a display can
+ * have in one setting. This struct can later be converted to struct videomode
+ * (see include/video/videomode.h). As each timing_entry can be defined as a
+ * range, one struct display_timing may become multiple struct videomodes.
+ *
+ * Example: hsync active high, vsync active low
+ *
+ *				    Active Video
+ * Video  ______________________XXXXXXXXXXXXXXXXXXXXXX_____________________
+ *	  |<- sync ->|<- back ->|<----- active ----->|<- front ->|<- sync..
+ *	  |	     |	 porch  |		     |	 porch	 |
+ *
+ * HSync _|¯¯¯¯¯¯¯¯¯¯|___________________________________________|¯¯¯¯¯¯¯¯¯
+ *
+ * VSync ¯|__________|¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯¯|_________
+ */
+struct display_timing {
+	struct timing_entry pixelclock;
+
+	struct timing_entry hactive;		/* hor. active video */
+	struct timing_entry hfront_porch;	/* hor. front porch */
+	struct timing_entry hback_porch;	/* hor. back porch */
+	struct timing_entry hsync_len;		/* hor. sync len */
+
+	struct timing_entry vactive;		/* ver. active video */
+	struct timing_entry vfront_porch;	/* ver. front porch */
+	struct timing_entry vback_porch;	/* ver. back porch */
+	struct timing_entry vsync_len;		/* ver. sync len */
+
+	unsigned int dmt_flags;			/* VESA DMT flags */
+	unsigned int data_flags;		/* video data flags */
+};
+
+/*
+ * This describes all timing settings a display provides.
+ * The native_mode is the default setting for this display.
+ * Drivers that can handle multiple videomodes should work with this struct and
+ * convert each entry to the desired end result.
+ */
+struct display_timings {
+	unsigned int num_timings;
+	unsigned int native_mode;
+
+	struct display_timing **timings;
+};
+
+/* get value specified by index from struct timing_entry */
+static inline u32 display_timing_get_value(const struct timing_entry *te,
+					   enum timing_entry_index index)
+{
+	switch (index) {
+	case TE_MIN:
+		return te->min;
+		break;
+	case TE_TYP:
+		return te->typ;
+		break;
+	case TE_MAX:
+		return te->max;
+		break;
+	default:
+		return te->typ;
+	}
+}
+
+/* get one entry from struct display_timings */
+static inline struct display_timing *display_timings_get(const struct
+							 display_timings *disp,
+							 unsigned int index)
+{
+	if (disp->num_timings > index)
+		return disp->timings[index];
+	else
+		return NULL;
+}
+
+void display_timings_release(struct display_timings *disp);
+
+#endif
diff --git a/include/video/videomode.h b/include/video/videomode.h
new file mode 100644
index 0000000..a421562
--- /dev/null
+++ b/include/video/videomode.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * generic videomode description
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_VIDEOMODE_H
+#define __LINUX_VIDEOMODE_H
+
+#include <linux/types.h>
+#include <video/display_timing.h>
+
+/*
+ * Subsystem independent description of a videomode.
+ * Can be generated from struct display_timing.
+ */
+struct videomode {
+	unsigned long pixelclock;	/* pixelclock in Hz */
+
+	u32 hactive;
+	u32 hfront_porch;
+	u32 hback_porch;
+	u32 hsync_len;
+
+	u32 vactive;
+	u32 vfront_porch;
+	u32 vback_porch;
+	u32 vsync_len;
+
+	unsigned int dmt_flags;	/* VESA DMT flags */
+	unsigned int data_flags; /* video data flags */
+};
+
+/**
+ * videomode_from_timing - convert display timing to videomode
+ * @disp: structure with all possible timing entries
+ * @vm: return value
+ * @index: index into the list of display timings in devicetree
+ *
+ * DESCRIPTION:
+ * This function converts a struct display_timing to a struct videomode.
+ */
+int videomode_from_timing(const struct display_timings *disp,
+			  struct videomode *vm, unsigned int index);
+
+#endif
-- 
cgit v0.10.2


From cc3f414cf2e404130584b63d373161ba6fd24bc2 Mon Sep 17 00:00:00 2001
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Date: Thu, 4 Oct 2012 15:32:52 +0200
Subject: video: add of helper for display timings/videomode

This adds support for reading display timings from DT into a struct
display_timings. The of_display_timing implementation supports multiple
subnodes. All children are read into an array, that can be queried.

If no native mode is specified, the first subnode will be used.

For cases where the graphics driver knows there can be only one
mode description or where the driver only supports one mode, a helper
function of_get_videomode is added, that gets a struct videomode from DT.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: Stephen Warren <swarren@nvidia.com>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Afzal Mohammed <Afzal@ti.com>
Tested-by: Rob Clark <robclark@gmail.com>
Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>

diff --git a/Documentation/devicetree/bindings/video/display-timing.txt b/Documentation/devicetree/bindings/video/display-timing.txt
new file mode 100644
index 0000000..1500385
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/display-timing.txt
@@ -0,0 +1,109 @@
+display-timing bindings
+=======================
+
+display-timings node
+--------------------
+
+required properties:
+ - none
+
+optional properties:
+ - native-mode: The native mode for the display, in case multiple modes are
+		provided. When omitted, assume the first node is the native.
+
+timing subnode
+--------------
+
+required properties:
+ - hactive, vactive: display resolution
+ - hfront-porch, hback-porch, hsync-len: horizontal display timing parameters
+   in pixels
+   vfront-porch, vback-porch, vsync-len: vertical display timing parameters in
+   lines
+ - clock-frequency: display clock in Hz
+
+optional properties:
+ - hsync-active: hsync pulse is active low/high/ignored
+ - vsync-active: vsync pulse is active low/high/ignored
+ - de-active: data-enable pulse is active low/high/ignored
+ - pixelclk-active: with
+			- active high = drive pixel data on rising edge/
+					sample data on falling edge
+			- active low  = drive pixel data on falling edge/
+					sample data on rising edge
+			- ignored     = ignored
+ - interlaced (bool): boolean to enable interlaced mode
+ - doublescan (bool): boolean to enable doublescan mode
+
+All the optional properties that are not bool follow the following logic:
+    <1>: high active
+    <0>: low active
+    omitted: not used on hardware
+
+There are different ways of describing the capabilities of a display. The
+devicetree representation corresponds to the one commonly found in datasheets
+for displays. If a display supports multiple signal timings, the native-mode
+can be specified.
+
+The parameters are defined as:
+
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vback_porch                 |          |       |
+  |          |        ↓                            |          |       |
+  +----------#######################################----------+-------+
+  |          #        ↑                            #          |       |
+  |          #        |                            #          |       |
+  |  hback   #        |                            #  hfront  | hsync |
+  |   porch  #        |       hactive              #  porch   |  len  |
+  |<-------->#<-------+--------------------------->#<-------->|<----->|
+  |          #        |                            #          |       |
+  |          #        |vactive                     #          |       |
+  |          #        |                            #          |       |
+  |          #        ↓                            #          |       |
+  +----------#######################################----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vfront_porch                |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+  |          |        ↑                            |          |       |
+  |          |        |vsync_len                   |          |       |
+  |          |        ↓                            |          |       |
+  +----------+-------------------------------------+----------+-------+
+
+Example:
+
+	display-timings {
+		native-mode = <&timing0>;
+		timing0: 1080p24 {
+			/* 1920x1080p24 */
+			clock-frequency = <52000000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <25>;
+			hback-porch = <25>;
+			hsync-len = <25>;
+			vback-porch = <2>;
+			vfront-porch = <2>;
+			vsync-len = <2>;
+			hsync-active = <1>;
+		};
+	};
+
+Every required property also supports the use of ranges, so the commonly used
+datasheet description with minimum, typical and maximum values can be used.
+
+Example:
+
+	timing1: timing {
+		/* 1920x1080p24 */
+		clock-frequency = <148500000>;
+		hactive = <1920>;
+		vactive = <1080>;
+		hsync-len = <0 44 60>;
+		hfront-porch = <80 88 95>;
+		hback-porch = <100 148 160>;
+		vfront-porch = <0 4 6>;
+		vback-porch = <0 36 50>;
+		vsync-len = <0 5 6>;
+	};
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 09a8f0d..807c7fa 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -39,6 +39,21 @@ config DISPLAY_TIMING
 config VIDEOMODE
        bool
 
+config OF_DISPLAY_TIMING
+	bool "Enable device tree display timing support"
+	depends on OF
+	select DISPLAY_TIMING
+	help
+	  helper to parse display timings from the devicetree
+
+config OF_VIDEOMODE
+	bool "Enable device tree videomode support"
+	depends on OF
+	select VIDEOMODE
+	select OF_DISPLAY_TIMING
+	help
+	  helper to get videomodes from the devicetree
+
 menuconfig FB
 	tristate "Support for frame buffer devices"
 	---help---
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index e0dd820..f592f3b 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -169,4 +169,6 @@ obj-$(CONFIG_FB_VIRTUAL)          += vfb.o
 #video output switch sysfs driver
 obj-$(CONFIG_VIDEO_OUTPUT_CONTROL) += output.o
 obj-$(CONFIG_DISPLAY_TIMING) += display_timing.o
+obj-$(CONFIG_OF_DISPLAY_TIMING) += of_display_timing.o
 obj-$(CONFIG_VIDEOMODE) += videomode.o
+obj-$(CONFIG_OF_VIDEOMODE) += of_videomode.o
diff --git a/drivers/video/of_display_timing.c b/drivers/video/of_display_timing.c
new file mode 100644
index 0000000..13ecd98
--- /dev/null
+++ b/drivers/video/of_display_timing.c
@@ -0,0 +1,239 @@
+/*
+ * OF helpers for parsing display timings
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * based on of_videomode.c by Sascha Hauer <s.hauer@pengutronix.de>
+ *
+ * This file is released under the GPLv2
+ */
+#include <linux/export.h>
+#include <linux/of.h>
+#include <linux/slab.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+
+/**
+ * parse_timing_property - parse timing_entry from device_node
+ * @np: device_node with the property
+ * @name: name of the property
+ * @result: will be set to the return value
+ *
+ * DESCRIPTION:
+ * Every display_timing can be specified with either just the typical value or
+ * a range consisting of min/typ/max. This function helps handling this
+ **/
+static int parse_timing_property(struct device_node *np, const char *name,
+			  struct timing_entry *result)
+{
+	struct property *prop;
+	int length, cells, ret;
+
+	prop = of_find_property(np, name, &length);
+	if (!prop) {
+		pr_err("%s: could not find property %s\n",
+			of_node_full_name(np), name);
+		return -EINVAL;
+	}
+
+	cells = length / sizeof(u32);
+	if (cells == 1) {
+		ret = of_property_read_u32(np, name, &result->typ);
+		result->min = result->typ;
+		result->max = result->typ;
+	} else if (cells == 3) {
+		ret = of_property_read_u32_array(np, name, &result->min, cells);
+	} else {
+		pr_err("%s: illegal timing specification in %s\n",
+			of_node_full_name(np), name);
+		return -EINVAL;
+	}
+
+	return ret;
+}
+
+/**
+ * of_get_display_timing - parse display_timing entry from device_node
+ * @np: device_node with the properties
+ **/
+static struct display_timing *of_get_display_timing(struct device_node *np)
+{
+	struct display_timing *dt;
+	u32 val = 0;
+	int ret = 0;
+
+	dt = kzalloc(sizeof(*dt), GFP_KERNEL);
+	if (!dt) {
+		pr_err("%s: could not allocate display_timing struct\n",
+			of_node_full_name(np));
+		return NULL;
+	}
+
+	ret |= parse_timing_property(np, "hback-porch", &dt->hback_porch);
+	ret |= parse_timing_property(np, "hfront-porch", &dt->hfront_porch);
+	ret |= parse_timing_property(np, "hactive", &dt->hactive);
+	ret |= parse_timing_property(np, "hsync-len", &dt->hsync_len);
+	ret |= parse_timing_property(np, "vback-porch", &dt->vback_porch);
+	ret |= parse_timing_property(np, "vfront-porch", &dt->vfront_porch);
+	ret |= parse_timing_property(np, "vactive", &dt->vactive);
+	ret |= parse_timing_property(np, "vsync-len", &dt->vsync_len);
+	ret |= parse_timing_property(np, "clock-frequency", &dt->pixelclock);
+
+	dt->dmt_flags = 0;
+	dt->data_flags = 0;
+	if (!of_property_read_u32(np, "vsync-active", &val))
+		dt->dmt_flags |= val ? VESA_DMT_VSYNC_HIGH :
+				VESA_DMT_VSYNC_LOW;
+	if (!of_property_read_u32(np, "hsync-active", &val))
+		dt->dmt_flags |= val ? VESA_DMT_HSYNC_HIGH :
+				VESA_DMT_HSYNC_LOW;
+	if (!of_property_read_u32(np, "de-active", &val))
+		dt->data_flags |= val ? DISPLAY_FLAGS_DE_HIGH :
+				DISPLAY_FLAGS_DE_LOW;
+	if (!of_property_read_u32(np, "pixelclk-active", &val))
+		dt->data_flags |= val ? DISPLAY_FLAGS_PIXDATA_POSEDGE :
+				DISPLAY_FLAGS_PIXDATA_NEGEDGE;
+
+	if (of_property_read_bool(np, "interlaced"))
+		dt->data_flags |= DISPLAY_FLAGS_INTERLACED;
+	if (of_property_read_bool(np, "doublescan"))
+		dt->data_flags |= DISPLAY_FLAGS_DOUBLESCAN;
+
+	if (ret) {
+		pr_err("%s: error reading timing properties\n",
+			of_node_full_name(np));
+		kfree(dt);
+		return NULL;
+	}
+
+	return dt;
+}
+
+/**
+ * of_get_display_timings - parse all display_timing entries from a device_node
+ * @np: device_node with the subnodes
+ **/
+struct display_timings *of_get_display_timings(struct device_node *np)
+{
+	struct device_node *timings_np;
+	struct device_node *entry;
+	struct device_node *native_mode;
+	struct display_timings *disp;
+
+	if (!np) {
+		pr_err("%s: no devicenode given\n", of_node_full_name(np));
+		return NULL;
+	}
+
+	timings_np = of_find_node_by_name(np, "display-timings");
+	if (!timings_np) {
+		pr_err("%s: could not find display-timings node\n",
+			of_node_full_name(np));
+		return NULL;
+	}
+
+	disp = kzalloc(sizeof(*disp), GFP_KERNEL);
+	if (!disp) {
+		pr_err("%s: could not allocate struct disp'\n",
+			of_node_full_name(np));
+		goto dispfail;
+	}
+
+	entry = of_parse_phandle(timings_np, "native-mode", 0);
+	/* assume first child as native mode if none provided */
+	if (!entry)
+		entry = of_get_next_child(np, NULL);
+	/* if there is no child, it is useless to go on */
+	if (!entry) {
+		pr_err("%s: no timing specifications given\n",
+			of_node_full_name(np));
+		goto entryfail;
+	}
+
+	pr_debug("%s: using %s as default timing\n",
+		of_node_full_name(np), entry->name);
+
+	native_mode = entry;
+
+	disp->num_timings = of_get_child_count(timings_np);
+	if (disp->num_timings == 0) {
+		/* should never happen, as entry was already found above */
+		pr_err("%s: no timings specified\n", of_node_full_name(np));
+		goto entryfail;
+	}
+
+	disp->timings = kzalloc(sizeof(struct display_timing *) *
+				disp->num_timings, GFP_KERNEL);
+	if (!disp->timings) {
+		pr_err("%s: could not allocate timings array\n",
+			of_node_full_name(np));
+		goto entryfail;
+	}
+
+	disp->num_timings = 0;
+	disp->native_mode = 0;
+
+	for_each_child_of_node(timings_np, entry) {
+		struct display_timing *dt;
+
+		dt = of_get_display_timing(entry);
+		if (!dt) {
+			/*
+			 * to not encourage wrong devicetrees, fail in case of
+			 * an error
+			 */
+			pr_err("%s: error in timing %d\n",
+				of_node_full_name(np), disp->num_timings + 1);
+			goto timingfail;
+		}
+
+		if (native_mode == entry)
+			disp->native_mode = disp->num_timings;
+
+		disp->timings[disp->num_timings] = dt;
+		disp->num_timings++;
+	}
+	of_node_put(timings_np);
+	/*
+	 * native_mode points to the device_node returned by of_parse_phandle
+	 * therefore call of_node_put on it
+	 */
+	of_node_put(native_mode);
+
+	pr_debug("%s: got %d timings. Using timing #%d as default\n",
+		of_node_full_name(np), disp->num_timings,
+		disp->native_mode + 1);
+
+	return disp;
+
+timingfail:
+	if (native_mode)
+		of_node_put(native_mode);
+	display_timings_release(disp);
+entryfail:
+	kfree(disp);
+dispfail:
+	of_node_put(timings_np);
+	return NULL;
+}
+EXPORT_SYMBOL_GPL(of_get_display_timings);
+
+/**
+ * of_display_timings_exist - check if a display-timings node is provided
+ * @np: device_node with the timing
+ **/
+int of_display_timings_exist(struct device_node *np)
+{
+	struct device_node *timings_np;
+
+	if (!np)
+		return -EINVAL;
+
+	timings_np = of_parse_phandle(np, "display-timings", 0);
+	if (!timings_np)
+		return -EINVAL;
+
+	of_node_put(timings_np);
+	return 1;
+}
+EXPORT_SYMBOL_GPL(of_display_timings_exist);
diff --git a/drivers/video/of_videomode.c b/drivers/video/of_videomode.c
new file mode 100644
index 0000000..5b8066c
--- /dev/null
+++ b/drivers/video/of_videomode.c
@@ -0,0 +1,54 @@
+/*
+ * generic videomode helper
+ *
+ * Copyright (c) 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>, Pengutronix
+ *
+ * This file is released under the GPLv2
+ */
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/of.h>
+#include <video/display_timing.h>
+#include <video/of_display_timing.h>
+#include <video/of_videomode.h>
+#include <video/videomode.h>
+
+/**
+ * of_get_videomode - get the videomode #<index> from devicetree
+ * @np - devicenode with the display_timings
+ * @vm - set to return value
+ * @index - index into list of display_timings
+ *	    (Set this to OF_USE_NATIVE_MODE to use whatever mode is
+ *	     specified as native mode in the DT.)
+ *
+ * DESCRIPTION:
+ * Get a list of all display timings and put the one
+ * specified by index into *vm. This function should only be used, if
+ * only one videomode is to be retrieved. A driver that needs to work
+ * with multiple/all videomodes should work with
+ * of_get_display_timings instead.
+ **/
+int of_get_videomode(struct device_node *np, struct videomode *vm,
+		     int index)
+{
+	struct display_timings *disp;
+	int ret;
+
+	disp = of_get_display_timings(np);
+	if (!disp) {
+		pr_err("%s: no timings specified\n", of_node_full_name(np));
+		return -EINVAL;
+	}
+
+	if (index == OF_USE_NATIVE_MODE)
+		index = disp->native_mode;
+
+	ret = videomode_from_timing(disp, vm, index);
+	if (ret)
+		return ret;
+
+	display_timings_release(disp);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_videomode);
diff --git a/include/video/of_display_timing.h b/include/video/of_display_timing.h
new file mode 100644
index 0000000..8016eb7
--- /dev/null
+++ b/include/video/of_display_timing.h
@@ -0,0 +1,20 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * display timings of helpers
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_DISPLAY_TIMING_H
+#define __LINUX_OF_DISPLAY_TIMING_H
+
+struct device_node;
+struct display_timings;
+
+#define OF_USE_NATIVE_MODE -1
+
+struct display_timings *of_get_display_timings(struct device_node *np);
+int of_display_timings_exist(struct device_node *np);
+
+#endif
diff --git a/include/video/of_videomode.h b/include/video/of_videomode.h
new file mode 100644
index 0000000..a07efcc
--- /dev/null
+++ b/include/video/of_videomode.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright 2012 Steffen Trumtrar <s.trumtrar@pengutronix.de>
+ *
+ * videomode of-helpers
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __LINUX_OF_VIDEOMODE_H
+#define __LINUX_OF_VIDEOMODE_H
+
+struct device_node;
+struct videomode;
+
+int of_get_videomode(struct device_node *np, struct videomode *vm,
+		     int index);
+
+#endif /* __LINUX_OF_VIDEOMODE_H */
-- 
cgit v0.10.2


From 2db54c72395298a58f29c75ae880be9e478fdbbd Mon Sep 17 00:00:00 2001
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Date: Wed, 14 Nov 2012 10:55:04 +0100
Subject: fbmon: add videomode helpers

Add a function to convert from the generic videomode to a fb_videomode.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Afzal Mohammed <Afzal@ti.com>
Tested-by: Rob Clark <robclark@gmail.com>
Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>

diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index cef6557..17ce135 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -31,6 +31,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <video/edid.h>
+#include <video/videomode.h>
 #ifdef CONFIG_PPC_OF
 #include <asm/prom.h>
 #include <asm/pci-bridge.h>
@@ -1373,6 +1374,57 @@ int fb_get_mode(int flags, u32 val, struct fb_var_screeninfo *var, struct fb_inf
 	kfree(timings);
 	return err;
 }
+
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+int fb_videomode_from_videomode(const struct videomode *vm,
+				struct fb_videomode *fbmode)
+{
+	unsigned int htotal, vtotal;
+
+	fbmode->xres = vm->hactive;
+	fbmode->left_margin = vm->hback_porch;
+	fbmode->right_margin = vm->hfront_porch;
+	fbmode->hsync_len = vm->hsync_len;
+
+	fbmode->yres = vm->vactive;
+	fbmode->upper_margin = vm->vback_porch;
+	fbmode->lower_margin = vm->vfront_porch;
+	fbmode->vsync_len = vm->vsync_len;
+
+	/* prevent division by zero in KHZ2PICOS macro */
+	fbmode->pixclock = vm->pixelclock ?
+			KHZ2PICOS(vm->pixelclock / 1000) : 0;
+
+	fbmode->sync = 0;
+	fbmode->vmode = 0;
+	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+		fbmode->sync |= FB_SYNC_HOR_HIGH_ACT;
+	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+		fbmode->sync |= FB_SYNC_VERT_HIGH_ACT;
+	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+		fbmode->vmode |= FB_VMODE_INTERLACED;
+	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+		fbmode->vmode |= FB_VMODE_DOUBLE;
+	fbmode->flag = 0;
+
+	htotal = vm->hactive + vm->hfront_porch + vm->hback_porch +
+		 vm->hsync_len;
+	vtotal = vm->vactive + vm->vfront_porch + vm->vback_porch +
+		 vm->vsync_len;
+	/* prevent division by zero */
+	if (htotal && vtotal) {
+		fbmode->refresh = vm->pixelclock / (htotal * vtotal);
+	/* a mode must have htotal and vtotal != 0 or it is invalid */
+	} else {
+		fbmode->refresh = 0;
+		return -EINVAL;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
+#endif
+
 #else
 int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
 {
diff --git a/include/linux/fb.h b/include/linux/fb.h
index c7a9571..100a176 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -19,6 +19,7 @@ struct vm_area_struct;
 struct fb_info;
 struct device;
 struct file;
+struct videomode;
 
 /* Definitions below are used in the parsed monitor specs */
 #define FB_DPMS_ACTIVE_OFF	1
@@ -714,6 +715,9 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
 extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
 extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
 
+extern int fb_videomode_from_videomode(const struct videomode *vm,
+				       struct fb_videomode *fbmode);
+
 /* drivers/video/modedb.c */
 #define VESA_MODEDB_SIZE 34
 extern void fb_var_to_videomode(struct fb_videomode *mode,
-- 
cgit v0.10.2


From 790890444f591145d3a00623af461c9006e17d51 Mon Sep 17 00:00:00 2001
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Date: Wed, 14 Nov 2012 11:12:38 +0100
Subject: fbmon: add of_videomode helpers

Add helper to get fb_videomode from devicetree.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Afzal Mohammed <Afzal@ti.com>
Tested-by: Rob Clark <robclark@gmail.com>
Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>

diff --git a/drivers/video/fbmon.c b/drivers/video/fbmon.c
index 17ce135..94ad0f7 100644
--- a/drivers/video/fbmon.c
+++ b/drivers/video/fbmon.c
@@ -31,6 +31,7 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <video/edid.h>
+#include <video/of_videomode.h>
 #include <video/videomode.h>
 #ifdef CONFIG_PPC_OF
 #include <asm/prom.h>
@@ -1425,6 +1426,47 @@ int fb_videomode_from_videomode(const struct videomode *vm,
 EXPORT_SYMBOL_GPL(fb_videomode_from_videomode);
 #endif
 
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+static inline void dump_fb_videomode(const struct fb_videomode *m)
+{
+	pr_debug("fb_videomode = %ux%u@%uHz (%ukHz) %u %u %u %u %u %u %u %u %u\n",
+		 m->xres, m->yres, m->refresh, m->pixclock, m->left_margin,
+		 m->right_margin, m->upper_margin, m->lower_margin,
+		 m->hsync_len, m->vsync_len, m->sync, m->vmode, m->flag);
+}
+
+/**
+ * of_get_fb_videomode - get a fb_videomode from devicetree
+ * @np: device_node with the timing specification
+ * @fb: will be set to the return value
+ * @index: index into the list of display timings in devicetree
+ *
+ * DESCRIPTION:
+ * This function is expensive and should only be used, if only one mode is to be
+ * read from DT. To get multiple modes start with of_get_display_timings ond
+ * work with that instead.
+ */
+int of_get_fb_videomode(struct device_node *np, struct fb_videomode *fb,
+			int index)
+{
+	struct videomode vm;
+	int ret;
+
+	ret = of_get_videomode(np, &vm, index);
+	if (ret)
+		return ret;
+
+	fb_videomode_from_videomode(&vm, fb);
+
+	pr_debug("%s: got %dx%d display mode from %s\n",
+		of_node_full_name(np), vm.hactive, vm.vactive, np->name);
+	dump_fb_videomode(fb);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_fb_videomode);
+#endif
+
 #else
 int fb_parse_edid(unsigned char *edid, struct fb_var_screeninfo *var)
 {
diff --git a/include/linux/fb.h b/include/linux/fb.h
index 100a176..58b9860 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -20,6 +20,7 @@ struct fb_info;
 struct device;
 struct file;
 struct videomode;
+struct device_node;
 
 /* Definitions below are used in the parsed monitor specs */
 #define FB_DPMS_ACTIVE_OFF	1
@@ -715,6 +716,9 @@ extern void fb_destroy_modedb(struct fb_videomode *modedb);
 extern int fb_find_mode_cvt(struct fb_videomode *mode, int margins, int rb);
 extern unsigned char *fb_ddc_read(struct i2c_adapter *adapter);
 
+extern int of_get_fb_videomode(struct device_node *np,
+			       struct fb_videomode *fb,
+			       int index);
 extern int fb_videomode_from_videomode(const struct videomode *vm,
 				       struct fb_videomode *fbmode);
 
-- 
cgit v0.10.2


From ebc64e453857e93b230881f48126257be9aa8830 Mon Sep 17 00:00:00 2001
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Date: Wed, 14 Nov 2012 11:22:52 +0100
Subject: drm_modes: add videomode helpers

Add conversion from videomode to drm_display_mode

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Afzal Mohammed <Afzal@ti.com>
Tested-by: Rob Clark <robclark@gmail.com>
Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index d8da30e..9f3f20b 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -35,6 +35,7 @@
 #include <linux/export.h>
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
+#include <video/videomode.h>
 
 /**
  * drm_mode_debug_printmodeline - debug print a mode
@@ -504,6 +505,42 @@ drm_gtf_mode(struct drm_device *dev, int hdisplay, int vdisplay, int vrefresh,
 }
 EXPORT_SYMBOL(drm_gtf_mode);
 
+#if IS_ENABLED(CONFIG_VIDEOMODE)
+int drm_display_mode_from_videomode(const struct videomode *vm,
+				    struct drm_display_mode *dmode)
+{
+	dmode->hdisplay = vm->hactive;
+	dmode->hsync_start = dmode->hdisplay + vm->hfront_porch;
+	dmode->hsync_end = dmode->hsync_start + vm->hsync_len;
+	dmode->htotal = dmode->hsync_end + vm->hback_porch;
+
+	dmode->vdisplay = vm->vactive;
+	dmode->vsync_start = dmode->vdisplay + vm->vfront_porch;
+	dmode->vsync_end = dmode->vsync_start + vm->vsync_len;
+	dmode->vtotal = dmode->vsync_end + vm->vback_porch;
+
+	dmode->clock = vm->pixelclock / 1000;
+
+	dmode->flags = 0;
+	if (vm->dmt_flags & VESA_DMT_HSYNC_HIGH)
+		dmode->flags |= DRM_MODE_FLAG_PHSYNC;
+	else if (vm->dmt_flags & VESA_DMT_HSYNC_LOW)
+		dmode->flags |= DRM_MODE_FLAG_NHSYNC;
+	if (vm->dmt_flags & VESA_DMT_VSYNC_HIGH)
+		dmode->flags |= DRM_MODE_FLAG_PVSYNC;
+	else if (vm->dmt_flags & VESA_DMT_VSYNC_LOW)
+		dmode->flags |= DRM_MODE_FLAG_NVSYNC;
+	if (vm->data_flags & DISPLAY_FLAGS_INTERLACED)
+		dmode->flags |= DRM_MODE_FLAG_INTERLACE;
+	if (vm->data_flags & DISPLAY_FLAGS_DOUBLESCAN)
+		dmode->flags |= DRM_MODE_FLAG_DBLSCAN;
+	drm_mode_set_name(dmode);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode);
+#endif
+
 /**
  * drm_mode_set_name - set the name on a mode
  * @mode: name will be set in this mode
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index fad21c9..d5c06ff 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -85,6 +85,8 @@ struct module;
 struct drm_file;
 struct drm_device;
 
+struct videomode;
+
 #include <drm/drm_os_linux.h>
 #include <drm/drm_hashtab.h>
 #include <drm/drm_mm.h>
@@ -1456,6 +1458,9 @@ extern struct drm_display_mode *
 drm_mode_create_from_cmdline_mode(struct drm_device *dev,
 				  struct drm_cmdline_mode *cmd);
 
+extern int drm_display_mode_from_videomode(const struct videomode *vm,
+					   struct drm_display_mode *dmode);
+
 /* Modesetting support */
 extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc);
 extern void drm_vblank_post_modeset(struct drm_device *dev, int crtc);
-- 
cgit v0.10.2


From edb37a95c58147f89713e6c5cd220fa8fdfb4833 Mon Sep 17 00:00:00 2001
From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Date: Sun, 28 Oct 2012 18:28:06 +0100
Subject: drm_modes: add of_videomode helpers

Add helper to get drm_display_mode from devicetree.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Thierry Reding <thierry.reding@avionic-design.de>
Acked-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Tested-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Afzal Mohammed <Afzal@ti.com>
Tested-by: Rob Clark <robclark@gmail.com>
Tested-by: Leela Krishna Amudala <leelakrishna.a@gmail.com>

diff --git a/drivers/gpu/drm/drm_modes.c b/drivers/gpu/drm/drm_modes.c
index 9f3f20b..04fa6f1 100644
--- a/drivers/gpu/drm/drm_modes.c
+++ b/drivers/gpu/drm/drm_modes.c
@@ -35,6 +35,7 @@
 #include <linux/export.h>
 #include <drm/drmP.h>
 #include <drm/drm_crtc.h>
+#include <video/of_videomode.h>
 #include <video/videomode.h>
 
 /**
@@ -541,6 +542,38 @@ int drm_display_mode_from_videomode(const struct videomode *vm,
 EXPORT_SYMBOL_GPL(drm_display_mode_from_videomode);
 #endif
 
+#if IS_ENABLED(CONFIG_OF_VIDEOMODE)
+/**
+ * of_get_drm_display_mode - get a drm_display_mode from devicetree
+ * @np: device_node with the timing specification
+ * @dmode: will be set to the return value
+ * @index: index into the list of display timings in devicetree
+ *
+ * This function is expensive and should only be used, if only one mode is to be
+ * read from DT. To get multiple modes start with of_get_display_timings and
+ * work with that instead.
+ */
+int of_get_drm_display_mode(struct device_node *np,
+			    struct drm_display_mode *dmode, int index)
+{
+	struct videomode vm;
+	int ret;
+
+	ret = of_get_videomode(np, &vm, index);
+	if (ret)
+		return ret;
+
+	drm_display_mode_from_videomode(&vm, dmode);
+
+	pr_debug("%s: got %dx%d display mode from %s\n",
+		of_node_full_name(np), vm.hactive, vm.vactive, np->name);
+	drm_mode_debug_printmodeline(dmode);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(of_get_drm_display_mode);
+#endif
+
 /**
  * drm_mode_set_name - set the name on a mode
  * @mode: name will be set in this mode
diff --git a/include/drm/drmP.h b/include/drm/drmP.h
index d5c06ff..fcc9d23 100644
--- a/include/drm/drmP.h
+++ b/include/drm/drmP.h
@@ -85,6 +85,7 @@ struct module;
 struct drm_file;
 struct drm_device;
 
+struct device_node;
 struct videomode;
 
 #include <drm/drm_os_linux.h>
@@ -1460,6 +1461,9 @@ drm_mode_create_from_cmdline_mode(struct drm_device *dev,
 
 extern int drm_display_mode_from_videomode(const struct videomode *vm,
 					   struct drm_display_mode *dmode);
+extern int of_get_drm_display_mode(struct device_node *np,
+				   struct drm_display_mode *dmode,
+				   int index);
 
 /* Modesetting support */
 extern void drm_vblank_pre_modeset(struct drm_device *dev, int crtc);
-- 
cgit v0.10.2