From af667a29dd3dfc0464f83bac30cc3c63fe5d0206 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Fri, 31 Dec 2010 06:10:01 +0000 Subject: e1000e: consistent use of Rx/Tx vs. RX/TX/rx/tx in comments/logs Some minor comment errors and whitespace issues discovered while looking into this are also addressed. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index 003a717..7bdec0b 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -1310,7 +1310,7 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) * apply workaround for hardware errata documented in errata * docs Fixes issue where some error prone or unreliable PCIe * completions are occurring, particularly with ASPM enabled. - * Without fix, issue can cause tx timeouts. + * Without fix, issue can cause Tx timeouts. */ reg = er32(GCR2); reg |= 1; diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index efdbb28..bc0860a 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -102,7 +102,7 @@ enum e1e_registers { E1000_RDTR = 0x02820, /* Rx Delay Timer - RW */ E1000_RXDCTL_BASE = 0x02828, /* Rx Descriptor Control - RW */ #define E1000_RXDCTL(_n) (E1000_RXDCTL_BASE + (_n << 8)) - E1000_RADV = 0x0282C, /* RX Interrupt Absolute Delay Timer - RW */ + E1000_RADV = 0x0282C, /* Rx Interrupt Absolute Delay Timer - RW */ /* Convenience macros * diff --git a/drivers/net/e1000e/lib.c b/drivers/net/e1000e/lib.c index 1c98dfa..68aa174 100644 --- a/drivers/net/e1000e/lib.c +++ b/drivers/net/e1000e/lib.c @@ -533,7 +533,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -556,7 +556,7 @@ s32 e1000e_check_for_fiber_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -598,7 +598,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) mac->autoneg_failed = 1; return 0; } - e_dbg("NOT RXing /C/, disable AutoNeg and force link.\n"); + e_dbg("NOT Rx'ing /C/, disable AutoNeg and force link.\n"); /* Disable auto-negotiation in the TXCW register */ ew32(TXCW, (mac->txcw & ~E1000_TXCW_ANE)); @@ -621,7 +621,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw) * and disable forced link in the Device Control register * in an attempt to auto-negotiate with our link partner. */ - e_dbg("RXing /C/, enable AutoNeg and stop forcing link.\n"); + e_dbg("Rx'ing /C/, enable AutoNeg and stop forcing link.\n"); ew32(TXCW, mac->txcw); ew32(CTRL, (ctrl & ~E1000_CTRL_SLU)); @@ -800,9 +800,9 @@ static s32 e1000_commit_fc_settings_generic(struct e1000_hw *hw) * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled * 1: Rx flow control is enabled (we can receive pause frames, - * but not send pause frames). + * but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames but we - * do not support receiving pause frames). + * do not support receiving pause frames). * 3: Both Rx and Tx flow control (symmetric) are enabled. */ switch (hw->fc.current_mode) { @@ -1031,9 +1031,9 @@ s32 e1000e_force_mac_fc(struct e1000_hw *hw) * The possible values of the "fc" parameter are: * 0: Flow control is completely disabled * 1: Rx flow control is enabled (we can receive pause - * frames but not send pause frames). + * frames but not send pause frames). * 2: Tx flow control is enabled (we can send pause frames - * frames but we do not receive pause frames). + * frames but we do not receive pause frames). * 3: Both Rx and Tx flow control (symmetric) is enabled. * other: No other values should be possible at this point. */ @@ -1189,7 +1189,7 @@ s32 e1000e_config_fc_after_link_up(struct e1000_hw *hw) } else { hw->fc.current_mode = e1000_fc_rx_pause; e_dbg("Flow Control = " - "RX PAUSE frames only.\r\n"); + "Rx PAUSE frames only.\r\n"); } } /* diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 04df745..1c18f26 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -77,17 +77,17 @@ struct e1000_reg_info { char *name; }; -#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ -#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ -#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ -#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ -#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ - -#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ -#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ -#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ -#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ -#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ +#define E1000_RDFH 0x02410 /* Rx Data FIFO Head - RW */ +#define E1000_RDFT 0x02418 /* Rx Data FIFO Tail - RW */ +#define E1000_RDFHS 0x02420 /* Rx Data FIFO Head Saved - RW */ +#define E1000_RDFTS 0x02428 /* Rx Data FIFO Tail Saved - RW */ +#define E1000_RDFPC 0x02430 /* Rx Data FIFO Packet Count - RW */ + +#define E1000_TDFH 0x03410 /* Tx Data FIFO Head - RW */ +#define E1000_TDFT 0x03418 /* Tx Data FIFO Tail - RW */ +#define E1000_TDFHS 0x03420 /* Tx Data FIFO Head Saved - RW */ +#define E1000_TDFTS 0x03428 /* Tx Data FIFO Tail Saved - RW */ +#define E1000_TDFPC 0x03430 /* Tx Data FIFO Packet Count - RW */ static const struct e1000_reg_info e1000_reg_info_tbl[] = { @@ -99,7 +99,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { /* Interrupt Registers */ {E1000_ICR, "ICR"}, - /* RX Registers */ + /* Rx Registers */ {E1000_RCTL, "RCTL"}, {E1000_RDLEN, "RDLEN"}, {E1000_RDH, "RDH"}, @@ -115,7 +115,7 @@ static const struct e1000_reg_info e1000_reg_info_tbl[] = { {E1000_RDFTS, "RDFTS"}, {E1000_RDFPC, "RDFPC"}, - /* TX Registers */ + /* Tx Registers */ {E1000_TCTL, "TCTL"}, {E1000_TDBAL, "TDBAL"}, {E1000_TDBAH, "TDBAH"}, @@ -160,7 +160,7 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) break; default: printk(KERN_INFO "%-15s %08x\n", - reginfo->name, __er32(hw, reginfo->ofs)); + reginfo->name, __er32(hw, reginfo->ofs)); return; } @@ -171,9 +171,8 @@ static void e1000_regdump(struct e1000_hw *hw, struct e1000_reg_info *reginfo) printk(KERN_CONT "\n"); } - /* - * e1000e_dump - Print registers, tx-ring and rx-ring + * e1000e_dump - Print registers, Tx-ring and Rx-ring */ static void e1000e_dump(struct e1000_adapter *adapter) { @@ -182,12 +181,20 @@ static void e1000e_dump(struct e1000_adapter *adapter) struct e1000_reg_info *reginfo; struct e1000_ring *tx_ring = adapter->tx_ring; struct e1000_tx_desc *tx_desc; - struct my_u0 { u64 a; u64 b; } *u0; + struct my_u0 { + u64 a; + u64 b; + } *u0; struct e1000_buffer *buffer_info; struct e1000_ring *rx_ring = adapter->rx_ring; union e1000_rx_desc_packet_split *rx_desc_ps; struct e1000_rx_desc *rx_desc; - struct my_u1 { u64 a; u64 b; u64 c; u64 d; } *u1; + struct my_u1 { + u64 a; + u64 b; + u64 c; + u64 d; + } *u1; u32 staterr; int i = 0; @@ -198,12 +205,10 @@ static void e1000e_dump(struct e1000_adapter *adapter) if (netdev) { dev_info(&adapter->pdev->dev, "Net device Info\n"); printk(KERN_INFO "Device Name state " - "trans_start last_rx\n"); + "trans_start last_rx\n"); printk(KERN_INFO "%-15s %016lX %016lX %016lX\n", - netdev->name, - netdev->state, - netdev->trans_start, - netdev->last_rx); + netdev->name, netdev->state, netdev->trans_start, + netdev->last_rx); } /* Print Registers */ @@ -214,26 +219,26 @@ static void e1000e_dump(struct e1000_adapter *adapter) e1000_regdump(hw, reginfo); } - /* Print TX Ring Summary */ + /* Print Tx Ring Summary */ if (!netdev || !netif_running(netdev)) goto exit; - dev_info(&adapter->pdev->dev, "TX Rings Summary\n"); + dev_info(&adapter->pdev->dev, "Tx Ring Summary\n"); printk(KERN_INFO "Queue [NTU] [NTC] [bi(ntc)->dma ]" - " leng ntw timestamp\n"); + " leng ntw timestamp\n"); buffer_info = &tx_ring->buffer_info[tx_ring->next_to_clean]; printk(KERN_INFO " %5d %5X %5X %016llX %04X %3X %016llX\n", - 0, tx_ring->next_to_use, tx_ring->next_to_clean, - (unsigned long long)buffer_info->dma, - buffer_info->length, - buffer_info->next_to_watch, - (unsigned long long)buffer_info->time_stamp); + 0, tx_ring->next_to_use, tx_ring->next_to_clean, + (unsigned long long)buffer_info->dma, + buffer_info->length, + buffer_info->next_to_watch, + (unsigned long long)buffer_info->time_stamp); - /* Print TX Rings */ + /* Print Tx Ring */ if (!netif_msg_tx_done(adapter)) goto rx_ring_summary; - dev_info(&adapter->pdev->dev, "TX Rings Dump\n"); + dev_info(&adapter->pdev->dev, "Tx Ring Dump\n"); /* Transmit Descriptor Formats - DEXT[29] is 0 (Legacy) or 1 (Extended) * @@ -263,22 +268,22 @@ static void e1000e_dump(struct e1000_adapter *adapter) * 63 48 47 40 39 36 35 32 31 24 23 20 19 0 */ printk(KERN_INFO "Tl[desc] [address 63:0 ] [SpeCssSCmCsLen]" - " [bi->dma ] leng ntw timestamp bi->skb " - "<-- Legacy format\n"); + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Legacy format\n"); printk(KERN_INFO "Tc[desc] [Ce CoCsIpceCoS] [MssHlRSCm0Plen]" - " [bi->dma ] leng ntw timestamp bi->skb " - "<-- Ext Context format\n"); + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Ext Context format\n"); printk(KERN_INFO "Td[desc] [address 63:0 ] [VlaPoRSCm1Dlen]" - " [bi->dma ] leng ntw timestamp bi->skb " - "<-- Ext Data format\n"); + " [bi->dma ] leng ntw timestamp bi->skb " + "<-- Ext Data format\n"); for (i = 0; tx_ring->desc && (i < tx_ring->count); i++) { tx_desc = E1000_TX_DESC(*tx_ring, i); buffer_info = &tx_ring->buffer_info[i]; u0 = (struct my_u0 *)tx_desc; printk(KERN_INFO "T%c[0x%03X] %016llX %016llX %016llX " - "%04X %3X %016llX %p", - (!(le64_to_cpu(u0->b) & (1<<29)) ? 'l' : - ((le64_to_cpu(u0->b) & (1<<20)) ? 'd' : 'c')), i, + "%04X %3X %016llX %p", + (!(le64_to_cpu(u0->b) & (1 << 29)) ? 'l' : + ((le64_to_cpu(u0->b) & (1 << 20)) ? 'd' : 'c')), i, (unsigned long long)le64_to_cpu(u0->a), (unsigned long long)le64_to_cpu(u0->b), (unsigned long long)buffer_info->dma, @@ -296,22 +301,22 @@ static void e1000e_dump(struct e1000_adapter *adapter) if (netif_msg_pktdata(adapter) && buffer_info->dma != 0) print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), - buffer_info->length, true); + 16, 1, phys_to_virt(buffer_info->dma), + buffer_info->length, true); } - /* Print RX Rings Summary */ + /* Print Rx Ring Summary */ rx_ring_summary: - dev_info(&adapter->pdev->dev, "RX Rings Summary\n"); + dev_info(&adapter->pdev->dev, "Rx Ring Summary\n"); printk(KERN_INFO "Queue [NTU] [NTC]\n"); printk(KERN_INFO " %5d %5X %5X\n", 0, - rx_ring->next_to_use, rx_ring->next_to_clean); + rx_ring->next_to_use, rx_ring->next_to_clean); - /* Print RX Rings */ + /* Print Rx Ring */ if (!netif_msg_rx_status(adapter)) goto exit; - dev_info(&adapter->pdev->dev, "RX Rings Dump\n"); + dev_info(&adapter->pdev->dev, "Rx Ring Dump\n"); switch (adapter->rx_ps_pages) { case 1: case 2: @@ -329,7 +334,7 @@ rx_ring_summary: * +-----------------------------------------------------+ */ printk(KERN_INFO "R [desc] [buffer 0 63:0 ] " - "[buffer 1 63:0 ] " + "[buffer 1 63:0 ] " "[buffer 2 63:0 ] [buffer 3 63:0 ] [bi->dma ] " "[bi->skb] <-- Ext Pkt Split format\n"); /* [Extended] Receive Descriptor (Write-Back) Format @@ -344,7 +349,7 @@ rx_ring_summary: * 63 48 47 32 31 20 19 0 */ printk(KERN_INFO "RWB[desc] [ck ipid mrqhsh] " - "[vl l0 ee es] " + "[vl l0 ee es] " "[ l3 l2 l1 hs] [reserved ] ---------------- " "[bi->skb] <-- Ext Rx Write-Back format\n"); for (i = 0; i < rx_ring->count; i++) { @@ -352,26 +357,26 @@ rx_ring_summary: rx_desc_ps = E1000_RX_DESC_PS(*rx_ring, i); u1 = (struct my_u1 *)rx_desc_ps; staterr = - le32_to_cpu(rx_desc_ps->wb.middle.status_error); + le32_to_cpu(rx_desc_ps->wb.middle.status_error); if (staterr & E1000_RXD_STAT_DD) { /* Descriptor Done */ printk(KERN_INFO "RWB[0x%03X] %016llX " - "%016llX %016llX %016llX " - "---------------- %p", i, - (unsigned long long)le64_to_cpu(u1->a), - (unsigned long long)le64_to_cpu(u1->b), - (unsigned long long)le64_to_cpu(u1->c), - (unsigned long long)le64_to_cpu(u1->d), - buffer_info->skb); + "%016llX %016llX %016llX " + "---------------- %p", i, + (unsigned long long)le64_to_cpu(u1->a), + (unsigned long long)le64_to_cpu(u1->b), + (unsigned long long)le64_to_cpu(u1->c), + (unsigned long long)le64_to_cpu(u1->d), + buffer_info->skb); } else { printk(KERN_INFO "R [0x%03X] %016llX " - "%016llX %016llX %016llX %016llX %p", i, - (unsigned long long)le64_to_cpu(u1->a), - (unsigned long long)le64_to_cpu(u1->b), - (unsigned long long)le64_to_cpu(u1->c), - (unsigned long long)le64_to_cpu(u1->d), - (unsigned long long)buffer_info->dma, - buffer_info->skb); + "%016llX %016llX %016llX %016llX %p", i, + (unsigned long long)le64_to_cpu(u1->a), + (unsigned long long)le64_to_cpu(u1->b), + (unsigned long long)le64_to_cpu(u1->c), + (unsigned long long)le64_to_cpu(u1->d), + (unsigned long long)buffer_info->dma, + buffer_info->skb); if (netif_msg_pktdata(adapter)) print_hex_dump(KERN_INFO, "", @@ -400,18 +405,18 @@ rx_ring_summary: * 63 48 47 40 39 32 31 16 15 0 */ printk(KERN_INFO "Rl[desc] [address 63:0 ] " - "[vl er S cks ln] [bi->dma ] [bi->skb] " - "<-- Legacy format\n"); + "[vl er S cks ln] [bi->dma ] [bi->skb] " + "<-- Legacy format\n"); for (i = 0; rx_ring->desc && (i < rx_ring->count); i++) { rx_desc = E1000_RX_DESC(*rx_ring, i); buffer_info = &rx_ring->buffer_info[i]; u0 = (struct my_u0 *)rx_desc; printk(KERN_INFO "Rl[0x%03X] %016llX %016llX " - "%016llX %p", i, - (unsigned long long)le64_to_cpu(u0->a), - (unsigned long long)le64_to_cpu(u0->b), - (unsigned long long)buffer_info->dma, - buffer_info->skb); + "%016llX %p", i, + (unsigned long long)le64_to_cpu(u0->a), + (unsigned long long)le64_to_cpu(u0->b), + (unsigned long long)buffer_info->dma, + buffer_info->skb); if (i == rx_ring->next_to_use) printk(KERN_CONT " NTU\n"); else if (i == rx_ring->next_to_clean) @@ -421,9 +426,10 @@ rx_ring_summary: if (netif_msg_pktdata(adapter)) print_hex_dump(KERN_INFO, "", - DUMP_PREFIX_ADDRESS, - 16, 1, phys_to_virt(buffer_info->dma), - adapter->rx_buffer_len, true); + DUMP_PREFIX_ADDRESS, + 16, 1, + phys_to_virt(buffer_info->dma), + adapter->rx_buffer_len, true); } } @@ -450,8 +456,7 @@ static int e1000_desc_unused(struct e1000_ring *ring) * @skb: pointer to sk_buff to be indicated to stack **/ static void e1000_receive_skb(struct e1000_adapter *adapter, - struct net_device *netdev, - struct sk_buff *skb, + struct net_device *netdev, struct sk_buff *skb, u8 status, __le16 vlan) { skb->protocol = eth_type_trans(skb, netdev); @@ -464,7 +469,7 @@ static void e1000_receive_skb(struct e1000_adapter *adapter, } /** - * e1000_rx_checksum - Receive Checksum Offload for 82543 + * e1000_rx_checksum - Receive Checksum Offload * @adapter: board private structure * @status_err: receive descriptor status and error fields * @csum: receive descriptor csum field @@ -548,7 +553,7 @@ map_skb: adapter->rx_buffer_len, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { - dev_err(&pdev->dev, "RX DMA map failed\n"); + dev_err(&pdev->dev, "Rx DMA map failed\n"); adapter->rx_dma_failed++; break; } @@ -601,7 +606,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, ps_page = &buffer_info->ps_pages[j]; if (j >= adapter->rx_ps_pages) { /* all unused desc entries get hw null ptr */ - rx_desc->read.buffer_addr[j+1] = ~cpu_to_le64(0); + rx_desc->read.buffer_addr[j + 1] = + ~cpu_to_le64(0); continue; } if (!ps_page->page) { @@ -617,7 +623,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, if (dma_mapping_error(&pdev->dev, ps_page->dma)) { dev_err(&adapter->pdev->dev, - "RX DMA page map failed\n"); + "Rx DMA page map failed\n"); adapter->rx_dma_failed++; goto no_buffers; } @@ -627,8 +633,8 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * didn't change because each write-back * erases this info. */ - rx_desc->read.buffer_addr[j+1] = - cpu_to_le64(ps_page->dma); + rx_desc->read.buffer_addr[j + 1] = + cpu_to_le64(ps_page->dma); } skb = netdev_alloc_skb_ip_align(netdev, @@ -644,7 +650,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, adapter->rx_ps_bsize0, DMA_FROM_DEVICE); if (dma_mapping_error(&pdev->dev, buffer_info->dma)) { - dev_err(&pdev->dev, "RX DMA map failed\n"); + dev_err(&pdev->dev, "Rx DMA map failed\n"); adapter->rx_dma_failed++; /* cleanup skb */ dev_kfree_skb_any(skb); @@ -662,7 +668,7 @@ static void e1000_alloc_rx_buffers_ps(struct e1000_adapter *adapter, * such as IA-64). */ wmb(); - writel(i<<1, adapter->hw.hw_addr + rx_ring->tail); + writel(i << 1, adapter->hw.hw_addr + rx_ring->tail); } i++; @@ -1106,11 +1112,10 @@ static bool e1000_clean_rx_irq_ps(struct e1000_adapter *adapter, cleaned = 1; cleaned_count++; dma_unmap_single(&pdev->dev, buffer_info->dma, - adapter->rx_ps_bsize0, - DMA_FROM_DEVICE); + adapter->rx_ps_bsize0, DMA_FROM_DEVICE); buffer_info->dma = 0; - /* see !EOP comment in other rx routine */ + /* see !EOP comment in other Rx routine */ if (!(staterr & E1000_RXD_STAT_EOP)) adapter->flags2 |= FLAG2_IS_DISCARDING; @@ -2610,7 +2615,7 @@ static void e1000_init_manageability_pt(struct e1000_adapter *adapter) } /** - * e1000_configure_tx - Configure 8254x Transmit Unit after Reset + * e1000_configure_tx - Configure Transmit Unit after Reset * @adapter: board private structure * * Configure the Tx unit of the MAC after a reset. @@ -2663,7 +2668,7 @@ static void e1000_configure_tx(struct e1000_adapter *adapter) * hthresh = 1 ==> prefetch when one or more available * pthresh = 0x1f ==> prefetch if internal cache 31 or less * BEWARE: this seems to work but should be considered first if - * there are tx hangs or other tx related bugs + * there are Tx hangs or other Tx related bugs */ txdctl |= E1000_TXDCTL_DMA_BURST_ENABLE; ew32(TXDCTL(0), txdctl); @@ -2877,7 +2882,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) if (adapter->rx_ps_pages) { /* this is a 32 byte descriptor */ rdlen = rx_ring->count * - sizeof(union e1000_rx_desc_packet_split); + sizeof(union e1000_rx_desc_packet_split); adapter->clean_rx = e1000_clean_rx_irq_ps; adapter->alloc_rx_buf = e1000_alloc_rx_buffers_ps; } else if (adapter->netdev->mtu > ETH_FRAME_LEN + ETH_FCS_LEN) { @@ -2900,7 +2905,7 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) /* * set the writeback threshold (only takes effect if the RDTR * is set). set GRAN=1 and write back up to 0x4 worth, and - * enable prefetching of 0x20 rx descriptors + * enable prefetching of 0x20 Rx descriptors * granularity = 01 * wthresh = 04, * hthresh = 04, @@ -2981,12 +2986,10 @@ static void e1000_configure_rx(struct e1000_adapter *adapter) * excessive C-state transition latencies result in * dropped transactions. */ - pm_qos_update_request( - &adapter->netdev->pm_qos_req, 55); + pm_qos_update_request(&adapter->netdev->pm_qos_req, 55); } else { - pm_qos_update_request( - &adapter->netdev->pm_qos_req, - PM_QOS_DEFAULT_VALUE); + pm_qos_update_request(&adapter->netdev->pm_qos_req, + PM_QOS_DEFAULT_VALUE); } } @@ -3152,7 +3155,7 @@ void e1000e_reset(struct e1000_adapter *adapter) /* lower 16 bits has Rx packet buffer allocation size in KB */ pba &= 0xffff; /* - * the Tx fifo also stores 16 bytes of information about the tx + * the Tx fifo also stores 16 bytes of information about the Tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (adapter->max_frame_size + @@ -3175,7 +3178,7 @@ void e1000e_reset(struct e1000_adapter *adapter) pba -= min_tx_space - tx_space; /* - * if short on Rx space, Rx wins and must trump tx + * if short on Rx space, Rx wins and must trump Tx * adjustment or use Early Receive if available */ if ((pba < min_rx_space) && @@ -4039,11 +4042,11 @@ static void e1000_print_link_info(struct e1000_adapter *adapter) adapter->netdev->name, adapter->link_speed, (adapter->link_duplex == FULL_DUPLEX) ? - "Full Duplex" : "Half Duplex", + "Full Duplex" : "Half Duplex", ((ctrl & E1000_CTRL_TFCE) && (ctrl & E1000_CTRL_RFCE)) ? - "RX/TX" : - ((ctrl & E1000_CTRL_RFCE) ? "RX" : - ((ctrl & E1000_CTRL_TFCE) ? "TX" : "None" ))); + "Rx/Tx" : + ((ctrl & E1000_CTRL_RFCE) ? "Rx" : + ((ctrl & E1000_CTRL_TFCE) ? "Tx" : "None"))); } static bool e1000e_has_link(struct e1000_adapter *adapter) @@ -4338,7 +4341,7 @@ link_up: /* Force detection of hung controller every watchdog period */ adapter->detect_tx_hung = 1; - /* flush partial descriptors to memory before detecting tx hang */ + /* flush partial descriptors to memory before detecting Tx hang */ if (adapter->flags2 & FLAG2_DMA_BURST) { ew32(TIDV, adapter->tx_int_delay | E1000_TIDV_FPD); ew32(RDTR, adapter->rx_int_delay | E1000_RDTR_FPD); @@ -4529,7 +4532,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, buffer_info->next_to_watch = i; buffer_info->dma = dma_map_single(&pdev->dev, skb->data + offset, - size, DMA_TO_DEVICE); + size, DMA_TO_DEVICE); buffer_info->mapped_as_page = false; if (dma_mapping_error(&pdev->dev, buffer_info->dma)) goto dma_error; @@ -4576,7 +4579,7 @@ static int e1000_tx_map(struct e1000_adapter *adapter, } } - segs = skb_shinfo(skb)->gso_segs ?: 1; + segs = skb_shinfo(skb)->gso_segs ? : 1; /* multiply data chunks by size of headers */ bytecount = ((segs - 1) * skb_headlen(skb)) + skb->len; @@ -4588,13 +4591,13 @@ static int e1000_tx_map(struct e1000_adapter *adapter, return count; dma_error: - dev_err(&pdev->dev, "TX DMA map failed\n"); + dev_err(&pdev->dev, "Tx DMA map failed\n"); buffer_info->dma = 0; if (count) count--; while (count--) { - if (i==0) + if (i == 0) i += tx_ring->count; i--; buffer_info = &tx_ring->buffer_info[i]; diff --git a/drivers/net/e1000e/param.c b/drivers/net/e1000e/param.c index d6f618d..4dd9b63 100644 --- a/drivers/net/e1000e/param.c +++ b/drivers/net/e1000e/param.c @@ -62,10 +62,9 @@ MODULE_PARM_DESC(copybreak, module_param_array_named(X, X, int, &num_##X, 0); \ MODULE_PARM_DESC(X, desc); - /* * Transmit Interrupt Delay in units of 1.024 microseconds - * Tx interrupt delay needs to typically be set to something non zero + * Tx interrupt delay needs to typically be set to something non-zero * * Valid Range: 0-65535 */ @@ -112,6 +111,7 @@ E1000_PARAM(InterruptThrottleRate, "Interrupt Throttling Rate"); #define DEFAULT_ITR 3 #define MAX_ITR 100000 #define MIN_ITR 100 + /* IntMode (Interrupt Mode) * * Valid Range: 0 - 2 diff --git a/drivers/net/e1000e/phy.c b/drivers/net/e1000e/phy.c index eb6cbad..326788e 100644 --- a/drivers/net/e1000e/phy.c +++ b/drivers/net/e1000e/phy.c @@ -640,7 +640,7 @@ s32 e1000_copper_link_setup_82577(struct e1000_hw *hw) s32 ret_val; u16 phy_data; - /* Enable CRS on TX. This must be set for half-duplex operation. */ + /* Enable CRS on Tx. This must be set for half-duplex operation. */ ret_val = e1e_rphy(hw, I82577_CFG_REG, &phy_data); if (ret_val) goto out; -- cgit v0.10.2