From a1676072558854b95336c8f7db76b0504e909a0a Mon Sep 17 00:00:00 2001 From: Tony Camuso Date: Thu, 15 May 2008 14:40:14 -0400 Subject: PCI: Correct last two HP entries in the bfsort whitelist Greetings. There is a code flaw in the bfsort whitelist, where there are redundant entries for the same two HP systems, DL385 G2 and DL585 G2. This patch replaces those redundant entries with the correct ones. The correct entries are for large-volume systems, the DL360 and DL380. ----------------------------------------------------------------------- commit ec69f0374c3b0ad7ea991b0e9ac00377acfe5b1a Author: Tony Camuso Date: Wed May 14 07:09:28 2008 -0400 Replace Redundant Whitelist Entries with the Correct Ones The ProLiant DL585 G2 and the DL585 G2 are entered reundantly in the dmi_system_id table. What should have been there are the DL360 and DL380. This patch simply replaces the redundant entries with the correct entries. arch/x86/pci/common.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Tony Camuso Signed-off-by: Pat Schoeller Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 6e64aaf..940185e 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { #endif { .callback = set_bf_sort, - .ident = "HP ProLiant DL385 G2", + .ident = "HP ProLiant DL360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"), }, }, { .callback = set_bf_sort, - .ident = "HP ProLiant DL585 G2", + .ident = "HP ProLiant DL380", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"), }, }, {} -- cgit v0.10.2 From 4efeb4dd3c0bf534e431a8e7c72d0afbd4cd24aa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 21:21:05 +0200 Subject: PCI: use dev_to_node in pci_call_probe to make sure get one online node. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 72cf61e..e1637bd 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, any need to change it. */ struct mempolicy *oldpol; cpumask_t oldmask = current->cpus_allowed; - int node = pcibus_to_node(dev->bus); + int node = dev_to_node(&dev->dev); if (node >= 0) { node_to_cpumask_ptr(nodecpumask, node); -- cgit v0.10.2 From 75b19b790bec3ebffbf513405b27500e22270cbc Mon Sep 17 00:00:00 2001 From: Bertram Felgenhauer Date: Fri, 30 May 2008 03:20:05 +0200 Subject: pci, x86: add workaround for bug in ASUS A7V600 BIOS (rev 1005) This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586, which it is not. Without this patch, I get the following warning while booting, among others, | PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 | ------------[ cut here ]------------ | WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60() | Modules linked in: | Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99 #1 | [] warn_on_slowpath+0x54/0x70 | [] ? vt_console_print+0x210/0x2b0 | [] ? vt_console_print+0x0/0x2b0 | [] ? __call_console_drivers+0x43/0x60 | [] ? _call_console_drivers+0x52/0x80 | [] ? release_console_sem+0x1c9/0x200 | [] ? raw_pci_read+0x41/0x70 | [] ? pci_read+0x2f/0x40 | [] pirq_via586_get+0x4a/0x60 | [] ? pirq_via586_get+0x0/0x60 | [] pcibios_lookup_irq+0x15d/0x430 | [] pcibios_irq_init+0x17a/0x3e0 | [] ? kernel_init+0x0/0x250 | [] kernel_init+0x73/0x250 | [] ? pcibios_irq_init+0x0/0x3e0 | [] ? schedule_tail+0x10/0x40 | [] ? ret_from_fork+0x6/0x1c | [] ? kernel_init+0x0/0x250 | [] ? kernel_init+0x0/0x250 | [] kernel_thread_helper+0x7/0x1c | ======================= | ---[ end trace 4eaa2a86a8e2da22 ]--- and IRQ trouble later, | irq 10: nobody cared (try booting with the "irqpoll" option) Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called at all; adding this workaround to via_router_probe() fixes the problem for me. Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll never understand why. Signed-off-by: Bertram Felgenhauer Acked-by: Alan Cox Signed-off-by: Ingo Molnar diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 0908fca..ca8df9c 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -621,6 +621,13 @@ static __init int via_router_probe(struct irq_router *r, */ device = PCI_DEVICE_ID_VIA_8235; break; + case PCI_DEVICE_ID_VIA_8237: + /** + * Asus a7v600 bios wrongly reports 8237 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8237; + break; } } -- cgit v0.10.2 From db9f600b96c16bb3c7f094e294fbdd370226ad86 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Wed, 28 May 2008 10:31:25 +0200 Subject: x86: pci-dma.c: use __GFP_NO_OOM instead of __GFP_NORETRY On Wed, 2008-05-28 at 04:47 +0200, Andi Kleen wrote: > > So... why not just remove the setting of __GFP_NORETRY? Why is it > > wrong to oom-kill things in this case? > > When the 16MB zone overflows (which can be common in some workloads) > calling the OOM killer is pretty useless because it has barely any > real user data [only exception would be the "only 16MB" case Alan > mentioned]. Killing random processes in this case is bad. > > I think for 16MB __GFP_NORETRY is ok because there should be > nothing freeable in there so looping is useless. Only exception would be the > "only 16MB total" case again but I'm not sure 2.6 supports that at all > on x86. > > On the other hand d_a_c() does more allocations than just 16MB, especially > on 64bit and the other zones need different strategies. Okay, so how about this then ? Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index c5ef1af..069e843 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -397,9 +397,6 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dev->dma_mask == NULL) return NULL; - /* Don't invoke OOM killer */ - gfp |= __GFP_NORETRY; - #ifdef CONFIG_X86_64 /* Why <=? Even when the mask is smaller than 4GB it is often larger than 16MB and in this case we have a chance of @@ -410,7 +407,9 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, #endif again: - page = dma_alloc_pages(dev, gfp, get_order(size)); + /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ + page = dma_alloc_pages(dev, + (gfp & GFP_DMA) ? gfp | __GFP_NORETRY : gfp, get_order(size)); if (page == NULL) return NULL; -- cgit v0.10.2 From f529626a86d61897862aa1bbbb4537773209238e Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 29 May 2008 00:30:21 -0700 Subject: suspend-vs-iommu: prevent suspend if we could not resume iommu/gart support misses suspend/resume code, which can do bad stuff, including memory corruption on resume. Prevent system suspend in case we would be unable to resume. Signed-off-by: Pavel Machek Tested-by: Patrick Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d..aa8ec92 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -548,6 +549,28 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static int gart_resume(struct sys_device *dev) +{ + return 0; +} + +static int gart_suspend(struct sys_device *dev, pm_message_t state) +{ + return -EINVAL; +} + +static struct sysdev_class gart_sysdev_class = { + .name = "gart", + .suspend = gart_suspend, + .resume = gart_resume, + +}; + +static struct sys_device device_gart = { + .id = 0, + .cls = &gart_sysdev_class, +}; + /* * Private Northbridge GATT initialization in case we cannot use the * AGP driver for some reason. @@ -558,7 +581,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) unsigned aper_base, new_aper_base; struct pci_dev *dev; void *gatt; - int i; + int i, error; printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); aper_size = aper_base = info->aper_size = 0; @@ -606,6 +629,12 @@ static __init int init_k8_gatt(struct agp_kern_info *info) pci_write_config_dword(dev, 0x90, ctl); } + + error = sysdev_class_register(&gart_sysdev_class); + if (!error) + error = sysdev_register(&device_gart); + if (error) + panic("Could not register gart_sysdev -- would corrupt data on next suspend"); flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", -- cgit v0.10.2 From 66c23551b1b774e2be3c7bdf91c0ebf2c7a3519e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 13 May 2008 13:26:03 +0300 Subject: ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq Channel should be marked active only when DMA is really started. Otherwise just omap_request_dma, omap_dma_link_lch and omap_dma_unlink_lch will cause incorrect dump_stack(). Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c00eda5..39c637b 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -501,8 +501,6 @@ static inline void omap_enable_channel_irq(int lch) /* Enable some nice interrupts. */ OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs; - - dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } static void omap_disable_channel_irq(int lch) -- cgit v0.10.2 From 714c8a061092417d3ffb1d0f0522e3d092c730dd Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Fri, 6 Jun 2008 00:22:50 -0400 Subject: Input: pcspkr - remove negative dependency on snd-pcsp It should be possible to build pcspkr driver together with snd-pcsp, even though tehy can not be used together. Signed-off-by: Stas Sergeev Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 3ad8bd9..432699d 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -15,7 +15,6 @@ if INPUT_MISC config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM - depends on SND_PCSP=n help Say Y here if you want the standard PC Speaker to be used for bells and whistles. -- cgit v0.10.2 From efd5184646d5d400fc538d093e9a0bec22a75551 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 6 Jun 2008 00:56:43 -0400 Subject: Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux table Fujitsu Siemens Amilo Pro V2030 needs nomux table entry, in addition to already existing entry for V2010 model (note that Fujitsu-Siemens changed the capitalization in the DMI data for product). Tested-by: Jiri Mleziva Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 9aafa96..78eb784 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -193,6 +193,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, }, { + .ident = "Fujitsu-Siemens Amilo Pro 2030", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, + { /* * No data is coming from the touchscreen unless KBC * is in legacy mode. -- cgit v0.10.2 From 15e02a3b510aa4ef3d077ebc25eb3cd08b9af034 Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Mon, 28 Apr 2008 16:55:01 +0530 Subject: ARM: OMAP: Correcting the gpmc prefetch control register address Correcting the GPMC_PREFETCH_CONTROL register address Signed-off-by: Thara Gopinath Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 02cede2..dbf68dc 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -42,7 +42,7 @@ #define GPMC_STATUS 0x54 #define GPMC_PREFETCH_CONFIG1 0x1e0 #define GPMC_PREFETCH_CONFIG2 0x1e4 -#define GPMC_PREFETCH_CONTROL 0x1e8 +#define GPMC_PREFETCH_CONTROL 0x1ec #define GPMC_PREFETCH_STATUS 0x1f0 #define GPMC_ECC_CONFIG 0x1f4 #define GPMC_ECC_CONTROL 0x1f8 -- cgit v0.10.2 From c4ea896476d30514109f61f1a6e0d8e2b201e401 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 3 Jun 2008 13:36:19 -0500 Subject: [POWERPC] 85xx: MPC85xx MDS - Unconditionally select PHYLIB for board fixups The MPC85xx MDS board requires some board level tweaks of the PHYs that either the eTSEC (gianfar) or UCC ethernet controllers are connected to. Its possible to build the phylib as a module, however this breaks the board level fix ups because phy_read and phy_write are not available if we build as a module. So we unconditionally select PHYLIB to ensure its built into the kernel if we are building in MPC85xx MDS support. This was determined to be the easiest soultion even though it prevents the user from removing PHYLIB support if they decide they don't want it. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 7ff29d5..ecbe580 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -34,6 +34,7 @@ config MPC85xx_MDS bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE select QUICC_ENGINE + select PHYLIB help This option enables support for the MPC85xx MDS board -- cgit v0.10.2 From ad16880daae42b4e8e078580812faa216600b05e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 6 Jun 2008 10:35:13 -0500 Subject: [POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO space Andrew Klossner pointed out the IO space size was in violation of the alignment requirements for windows on the 85xx. The size should have been 1M (to match u-boot). Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index fa298a8..4811b81 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -409,7 +409,7 @@ interrupts = <26 2>; bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>; + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; @@ -428,7 +428,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x8000000>; + 0x0 0x100000>; }; }; }; -- cgit v0.10.2 From a1072b2597752eafca77a664a1816faf7a43bac8 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 20 May 2008 15:14:18 -0500 Subject: [POWERPC] 8610: Update defconfig for MPC8610 HPCD Update the defconfig for the Freescale MPC8610 HPCD board. Enable module support. Disable support for all NICs except for the on-board ULI526x. Enable support for the Freescale DIU driver. Increase the maximum zone order to 12, so that the DIU driver can allocate physically-contiguous 5MB buffers. Enable SYSV IPC and OSS plugin support, which are needed for some OSS apps. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig index 7e5b9ce..5612d40 100644 --- a/arch/powerpc/configs/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:33 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:50:24 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -60,9 +62,10 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -86,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y @@ -110,14 +114,22 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -151,6 +163,7 @@ CONFIG_PPC_86xx=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_MPC8641_HPCN is not set +# CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y CONFIG_MPC8610=y # CONFIG_IPIC is not set @@ -199,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -223,12 +238,14 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +255,11 @@ CONFIG_PCI_DEBUG=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -303,8 +320,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -446,6 +465,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -504,6 +524,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -553,7 +574,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -563,13 +588,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -609,6 +632,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -628,25 +652,9 @@ CONFIG_DUMMY=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -663,64 +671,10 @@ CONFIG_ULI526X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_GIANFAR is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # @@ -728,6 +682,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -783,6 +738,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -824,13 +780,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -852,9 +801,11 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -864,19 +815,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -893,12 +838,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -908,7 +863,56 @@ CONFIG_DAB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_FSL_DIU=y +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -922,6 +926,8 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # # Sound @@ -938,7 +944,7 @@ CONFIG_SND_PCM=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y -# CONFIG_SND_PCM_OSS_PLUGINS is not set +CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -965,6 +971,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1031,14 +1038,14 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_SOC=y # -# SoC Audio support for SuperH -# - -# # ALSA SoC audio for Freescale SOCs # CONFIG_SND_SOC_MPC8610=y CONFIG_SND_SOC_MPC8610_HPCD=y + +# +# SoC Audio for the Texas Instruments OMAP +# CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y @@ -1055,6 +1062,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1063,14 +1072,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1090,7 +1096,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -1134,6 +1139,7 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1147,10 +1153,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1234,6 +1239,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1244,6 +1250,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1251,6 +1258,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1261,6 +1269,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1274,9 +1283,11 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -1284,6 +1295,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1294,48 +1306,80 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 70b3ec3e523fc2370117c0eaf5be80859848f66a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 9 Jun 2008 08:53:39 -0500 Subject: [POWERPC] Updated Freescale PPC defconfigs Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 7d18440..5428f9f 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Fri Apr 11 11:10:09 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:21 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -196,7 +201,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -211,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +245,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +255,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -362,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -445,6 +451,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -641,7 +648,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -661,6 +667,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -668,6 +675,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -724,6 +732,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -751,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -762,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -795,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -804,17 +806,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -919,12 +916,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -977,16 +984,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1004,6 +1015,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1023,7 +1035,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1061,6 +1075,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1072,6 +1087,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -1090,6 +1106,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1144,11 +1161,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1168,7 +1182,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1237,7 +1250,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1282,6 +1294,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1302,6 +1315,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1312,6 +1326,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1324,6 +1339,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1335,6 +1351,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1345,51 +1362,81 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 1f57456..9bc3a03 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:15 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:21 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -247,11 +255,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -299,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -361,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,6 +451,7 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -549,7 +557,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -559,13 +571,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -CONFIG_SATA_FSL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -605,6 +615,7 @@ CONFIG_SATA_FSL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -698,7 +709,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -718,6 +728,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -725,6 +736,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -781,6 +793,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -808,7 +821,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -819,13 +831,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -852,6 +857,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -861,17 +867,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -976,12 +977,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1034,16 +1045,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1061,6 +1076,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1080,7 +1096,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1118,6 +1136,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1129,6 +1148,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -1147,6 +1167,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1201,11 +1222,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1225,7 +1243,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1294,7 +1311,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1339,6 +1355,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1351,6 +1368,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1358,6 +1376,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1368,6 +1387,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1380,6 +1400,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1391,6 +1412,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1401,51 +1423,81 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 50cceda..1eca26f 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:51 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:22 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -212,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -522,7 +529,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -546,6 +552,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -553,6 +560,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -600,6 +608,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -628,7 +637,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -639,13 +647,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -671,6 +672,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -680,19 +682,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -775,12 +771,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -811,6 +817,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -819,6 +827,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -870,11 +879,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -894,7 +900,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -952,7 +957,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -995,6 +999,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1005,6 +1010,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1012,6 +1018,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1021,6 +1028,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1030,52 +1038,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index ac91302..de95d32 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:16 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:24 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -212,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -526,7 +533,6 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -550,6 +556,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -557,6 +564,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -613,6 +621,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -653,13 +662,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -686,6 +688,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -695,17 +698,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -809,12 +807,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -867,16 +875,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -894,6 +906,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -913,7 +926,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -951,6 +966,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -962,6 +978,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers @@ -972,14 +989,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -999,7 +1013,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1060,7 +1073,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1147,6 +1159,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=y @@ -1157,6 +1170,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1164,6 +1178,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1173,6 +1188,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1182,52 +1198,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index e1de399..b47fc91 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:17 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:25 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -541,7 +548,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -551,13 +562,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -598,6 +607,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -659,7 +669,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -679,6 +688,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -686,6 +696,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -722,6 +733,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -749,7 +761,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -760,13 +771,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -793,6 +797,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -802,17 +807,12 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -862,12 +862,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -905,16 +915,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -925,6 +939,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -945,6 +960,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -982,10 +998,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1040,11 +1058,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1064,7 +1079,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1126,7 +1140,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1210,6 +1223,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1220,6 +1234,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1227,6 +1242,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1236,6 +1252,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1245,51 +1262,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index b4e39cf..fdac484 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:18 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:26 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -587,7 +594,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -607,6 +613,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -614,6 +621,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -650,6 +658,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -677,7 +686,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -688,13 +696,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -721,6 +722,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -730,17 +732,12 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -790,12 +787,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -833,16 +840,20 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -853,6 +864,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,6 +885,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -909,10 +922,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -967,11 +982,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -991,7 +1003,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1053,7 +1064,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1137,6 +1147,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1147,6 +1158,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1154,6 +1166,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1163,6 +1176,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1172,51 +1186,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index b4e82c0..c82e96e 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:56 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:26 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -471,7 +478,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -491,6 +497,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -498,6 +505,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -544,6 +552,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -571,7 +580,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -582,13 +590,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -614,6 +615,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -623,19 +625,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -718,12 +714,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -754,6 +760,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -762,6 +770,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -813,11 +822,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -837,7 +843,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -895,7 +900,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -936,6 +940,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -946,6 +951,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -953,6 +959,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -962,6 +969,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -971,51 +979,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index d50a96e..20fd9f5 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:57 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:27 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -544,6 +550,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -551,6 +558,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -598,6 +606,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -626,7 +635,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -637,13 +645,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -669,6 +670,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -678,19 +680,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -773,12 +769,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -809,6 +815,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -817,6 +825,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -868,11 +877,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -892,7 +898,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -950,7 +955,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -993,6 +997,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1003,6 +1008,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1010,6 +1016,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1019,6 +1026,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1028,52 +1036,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index f377cde..0f94d9f 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:23 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:28 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -211,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -350,6 +356,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -411,8 +418,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set @@ -459,6 +468,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -503,6 +513,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -537,13 +548,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -552,6 +556,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -561,19 +566,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -646,12 +645,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -680,6 +689,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -688,13 +699,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -714,7 +722,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -772,7 +779,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -817,6 +823,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -827,6 +834,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -834,6 +842,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -841,6 +850,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -850,50 +860,80 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index a633176..7c1c7fa 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:24 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:29 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -211,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -345,6 +351,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -352,6 +359,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 @@ -406,8 +414,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -464,6 +474,16 @@ CONFIG_GFAR_NAPI=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -508,6 +528,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -542,13 +563,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -557,6 +571,8 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -566,19 +582,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -642,6 +652,11 @@ CONFIG_WATCHDOG=y CONFIG_83xx_WDT=y # +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y @@ -651,13 +666,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -680,6 +706,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -695,33 +729,83 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -741,7 +825,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -799,7 +882,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -844,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -854,6 +937,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -861,6 +945,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -868,6 +953,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -881,50 +967,80 @@ CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 1f15182..1752918 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:38 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:30 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,12 +112,14 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -232,6 +239,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -241,11 +249,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -293,8 +301,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -348,6 +354,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -420,6 +427,7 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -464,6 +472,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -498,13 +507,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -513,6 +515,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -522,19 +525,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -607,12 +604,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -640,13 +647,10 @@ CONFIG_HID=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -659,7 +663,6 @@ CONFIG_HID=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -717,7 +720,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -746,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -756,6 +759,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -763,6 +767,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -770,6 +775,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -779,50 +785,80 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 2d0debc..b82bb04 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Mon Feb 11 16:25:19 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:30 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -68,23 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -92,6 +93,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -109,6 +111,8 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +138,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support @@ -191,12 +194,13 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -207,16 +211,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y CONFIG_ISA_DMA_API=y # @@ -229,6 +234,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +244,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +297,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -351,6 +356,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -430,17 +437,19 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_IDEDISK is not set @@ -457,7 +466,7 @@ CONFIG_IDE_PROC_FS=y CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -517,6 +526,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -561,6 +571,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -594,12 +605,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -615,6 +621,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -627,12 +634,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -660,19 +677,20 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -693,14 +711,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -743,15 +758,16 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -790,6 +806,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -800,6 +817,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -807,6 +825,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -817,7 +836,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -829,9 +850,9 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set @@ -841,6 +862,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -852,48 +874,78 @@ CONFIG_FORCED_INLINING=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index b998539..f33fd51 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:25 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:31 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -208,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -229,6 +236,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +246,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -419,6 +426,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -463,6 +471,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -494,12 +503,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -528,12 +532,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -561,6 +575,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -569,13 +585,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -595,7 +608,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -652,7 +664,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -691,6 +702,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -701,6 +713,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -708,6 +721,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -718,6 +732,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -730,6 +745,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -740,6 +756,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -750,47 +767,77 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index a9f113b..042a85e 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:03 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:32 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -203,7 +208,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -219,11 +223,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -248,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -257,11 +264,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -332,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -395,6 +405,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -511,13 +526,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -557,6 +570,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -622,7 +636,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -642,6 +655,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -649,6 +663,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -713,6 +728,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -744,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -755,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -788,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -797,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -826,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -875,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -900,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -918,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1005,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1079,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1118,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1145,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1164,7 +1191,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1202,10 +1231,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1257,23 +1288,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set CONFIG_DMADEVICES=y # # DMA Devices # CONFIG_FSL_DMA=y -# CONFIG_FSL_DMA_SELFTEST is not set CONFIG_DMA_ENGINE=y # # DMA Clients # # CONFIG_NET_DMA is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1293,7 +1320,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1363,10 +1389,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1450,9 +1475,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1469,6 +1495,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1479,6 +1506,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1492,6 +1520,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1503,6 +1532,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1513,52 +1543,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 851ac91..e19592b 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:27 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:33 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -247,11 +255,12 @@ CONFIG_PCI_DEBUG=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -299,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -462,7 +469,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -482,6 +488,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -489,6 +496,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -535,6 +543,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -572,12 +581,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -610,12 +614,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -646,6 +660,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -654,14 +670,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -681,7 +694,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -738,7 +750,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -777,6 +788,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -787,6 +799,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -794,6 +807,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -804,6 +818,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -816,6 +831,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -827,6 +843,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -837,49 +854,79 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index 2b866b3..28004e9 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:05 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:34 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,12 +114,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -156,6 +161,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=y # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -212,11 +218,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -249,11 +258,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -301,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -358,6 +366,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -525,7 +534,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -546,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -553,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -600,6 +610,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -629,7 +640,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -640,13 +650,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -672,6 +675,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -681,19 +685,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -776,12 +774,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -812,6 +820,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -820,6 +830,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -871,11 +882,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -895,7 +903,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -953,7 +960,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -994,6 +1000,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1004,6 +1011,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1011,6 +1019,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1021,6 +1030,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1033,6 +1043,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1045,6 +1056,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -1066,52 +1078,82 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index 53aa6f3..03627cfe 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:06 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:35 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set CONFIG_MPC85xx_DS=y +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -217,11 +223,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -246,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -255,11 +264,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -330,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -393,6 +405,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -499,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -509,13 +526,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -555,6 +570,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -620,7 +636,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -640,6 +655,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -647,6 +663,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -711,6 +728,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -742,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -753,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -786,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -795,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -824,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -873,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -898,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -916,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1003,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1077,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1116,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1143,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1162,7 +1191,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1200,10 +1231,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1255,11 +1288,8 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1279,7 +1309,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1349,10 +1378,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1436,9 +1464,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1447,6 +1476,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1454,6 +1484,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1464,6 +1495,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1477,6 +1509,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1488,6 +1521,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1498,52 +1532,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index a469fe9..b09f003 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:30 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:36 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC85xx=y CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -208,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -236,6 +243,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -245,11 +253,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -297,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -437,7 +444,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -515,7 +522,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -535,6 +541,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -542,6 +549,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -588,6 +596,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -624,12 +633,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -662,12 +666,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -698,6 +712,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -706,14 +722,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -733,7 +746,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -790,7 +802,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -829,6 +840,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -839,6 +851,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -846,6 +859,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -856,6 +870,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -868,6 +883,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -878,6 +894,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -888,48 +905,78 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 67f6797..24f7f44 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:39 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:37 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,6 +114,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -206,11 +211,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -233,6 +240,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,11 +250,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -294,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -449,7 +456,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -469,6 +475,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -476,6 +483,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -522,6 +530,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -558,12 +567,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -596,12 +600,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -628,14 +642,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -648,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -705,7 +715,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -732,6 +741,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -742,6 +752,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -749,6 +760,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -756,6 +768,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -765,48 +778,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index fef6055..655518dc 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:39 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:38 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,6 +115,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -152,6 +156,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -207,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -228,6 +235,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -237,11 +245,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -289,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -418,6 +425,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -462,6 +470,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -487,17 +496,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -526,12 +529,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -559,6 +572,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -567,6 +582,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -602,11 +618,8 @@ CONFIG_RTC_DRV_M48T59=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -619,7 +632,6 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -676,7 +688,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -715,6 +726,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -725,6 +737,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -732,6 +745,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -742,6 +756,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -753,6 +768,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -763,6 +779,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -784,47 +801,77 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 1d303c4..7804ca1 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:42 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:38 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -114,12 +117,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -158,6 +163,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -215,11 +221,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -243,6 +251,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -252,11 +261,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -304,8 +314,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -418,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set @@ -505,7 +514,7 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -653,7 +662,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -673,6 +681,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -680,6 +689,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -753,6 +763,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -796,13 +807,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -829,6 +833,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -838,19 +843,13 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -920,12 +919,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -973,6 +982,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -981,15 +992,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1009,7 +1017,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1073,7 +1080,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1141,9 +1147,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set @@ -1152,6 +1159,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1159,6 +1167,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1169,6 +1178,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1182,6 +1192,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1194,6 +1205,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1204,50 +1216,80 @@ CONFIG_BDI_SWITCH=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index d39ee3b..e0b5559 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:43 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:39 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y # CONFIG_TQM8541 is not set @@ -171,7 +176,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set # @@ -208,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -233,6 +239,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,11 +249,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -294,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -352,6 +358,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -423,6 +430,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -506,7 +514,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -600,7 +608,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -620,6 +627,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -627,6 +635,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -673,6 +682,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -713,13 +723,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -744,6 +747,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -753,19 +757,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -835,12 +833,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -871,6 +879,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -879,14 +889,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -906,7 +913,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -974,7 +980,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1013,6 +1018,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1025,6 +1031,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1032,6 +1039,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1041,6 +1049,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1050,48 +1059,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index cbf6ad2..6f9067b 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:44 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:40 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set CONFIG_TQM8541=y @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index bbff962..03120b5 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:44 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:41 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 63c5ec8..3113257 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:45 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:42 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index a3cc94a..6740f2a 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Wed Feb 20 12:26:07 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:08 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +77,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set @@ -107,6 +110,8 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -131,7 +136,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support @@ -194,7 +198,6 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -213,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -235,6 +240,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,13 +250,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -293,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -482,6 +486,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -548,6 +553,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -580,12 +586,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -602,12 +603,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -632,12 +643,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -650,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -708,7 +716,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -751,6 +758,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -761,6 +769,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -768,6 +777,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -778,6 +788,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -788,6 +799,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -798,6 +810,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -811,3 +824,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 2b1504e..ba2a463 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:09 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:09 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -107,6 +107,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -194,11 +195,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -215,6 +218,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -224,11 +228,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -283,6 +287,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -498,6 +503,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -521,6 +527,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -552,12 +559,7 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -574,12 +576,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -603,12 +615,9 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -675,7 +684,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -752,6 +760,7 @@ CONFIG_NLS_UTF8=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -763,6 +772,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -770,6 +780,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -780,6 +791,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -791,6 +803,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -802,6 +815,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -811,45 +825,75 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 125b476..ac72b48 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:10 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:09 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -108,6 +110,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -212,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +239,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,13 +249,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -292,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -481,6 +485,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -505,6 +510,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -537,12 +543,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -559,12 +560,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -588,13 +599,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -607,7 +615,6 @@ CONFIG_DAB=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -665,7 +672,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -708,6 +714,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -718,6 +725,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -725,6 +733,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -735,6 +744,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -745,6 +755,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -755,6 +766,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -767,3 +779,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 22a943a..48434c2c 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:10 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:10 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -91,6 +93,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -118,12 +121,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -223,11 +228,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -251,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -260,11 +268,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -313,8 +321,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -329,6 +335,7 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m # CONFIG_NF_CT_PROTO_UDPLITE is not set @@ -407,6 +414,7 @@ CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m @@ -459,8 +467,6 @@ CONFIG_IEEE80211_DEBUG=y CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -CONFIG_IEEE80211_SOFTMAC_DEBUG=y # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -486,6 +492,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -565,6 +572,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -670,7 +678,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -680,13 +692,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -726,6 +736,7 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -785,7 +796,6 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -805,6 +815,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -812,6 +823,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -886,6 +898,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -913,7 +926,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -924,13 +936,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -957,6 +962,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -966,19 +972,13 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -1048,12 +1048,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1115,12 +1125,14 @@ CONFIG_USB_DEVICE_CLASS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1138,6 +1150,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1159,6 +1172,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1202,9 +1216,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -1238,10 +1254,12 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1293,11 +1311,8 @@ CONFIG_RTC_DRV_RS5C372=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1318,10 +1333,9 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1388,12 +1402,10 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1467,9 +1479,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1481,6 +1494,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1488,6 +1502,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1498,6 +1513,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1510,6 +1526,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1521,6 +1538,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1532,52 +1550,82 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index a3d52e3..066c583 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:11 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:11 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -209,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -235,6 +241,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,11 +251,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -296,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -454,7 +459,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -464,7 +472,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -509,6 +516,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -596,7 +604,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -616,6 +623,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -623,6 +631,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -670,6 +679,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -705,12 +715,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -743,12 +748,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -779,6 +794,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -787,14 +804,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -814,7 +828,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -871,7 +884,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -914,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -924,6 +937,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -931,6 +945,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -940,6 +955,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -950,48 +966,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 0264c57..30d7834 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:13 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:12 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -108,6 +108,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -196,11 +197,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -224,6 +227,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -233,11 +237,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -292,6 +296,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -536,7 +541,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -554,6 +558,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -561,6 +566,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -634,6 +640,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -668,12 +675,7 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -690,12 +692,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -722,13 +734,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -798,7 +807,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -877,6 +885,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -889,6 +898,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -896,6 +906,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -906,6 +917,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -918,6 +930,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -929,6 +942,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -938,45 +952,75 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 9e0dd82..4293c8b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc9 -# Tue Apr 15 18:07:36 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:14 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -201,7 +206,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,11 +221,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +246,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -249,11 +256,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -301,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -361,6 +366,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -439,6 +445,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,8 +508,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set @@ -554,6 +563,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -607,6 +617,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -642,13 +653,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -658,6 +662,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -667,19 +672,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -757,12 +756,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -810,16 +819,20 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set @@ -828,6 +841,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,17 +887,15 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -903,7 +915,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -962,7 +973,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1009,6 +1019,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1027,6 +1038,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1034,6 +1046,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1043,51 +1056,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 2075722..3efab71 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:08 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 09:03:46 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC85xx_DS=y +CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -221,11 +227,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -250,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -259,11 +268,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -334,8 +344,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -397,6 +409,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -503,7 +516,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -513,13 +530,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -559,6 +574,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -625,7 +641,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -646,6 +661,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -653,6 +669,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -717,6 +734,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -750,7 +768,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -761,13 +778,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -794,6 +804,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -803,19 +814,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -832,13 +837,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -881,14 +906,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -906,6 +934,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -924,27 +953,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1011,6 +1034,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1085,11 +1109,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1124,16 +1148,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1151,6 +1179,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1170,7 +1199,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1208,12 +1239,21 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1263,11 +1303,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_DMADEVICES is not set +# CONFIG_RTC_DRV_PPC is not set +CONFIG_DMADEVICES=y # -# Userspace I/O +# DMA Devices # +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set # CONFIG_UIO is not set # @@ -1287,7 +1335,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1357,10 +1404,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1444,9 +1490,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1455,6 +1502,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1462,6 +1510,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1472,6 +1521,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1485,6 +1535,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1497,6 +1548,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1507,53 +1559,83 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig index d01dcdb..4a81715 100644 --- a/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:11 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:15 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_PPC_86xx=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_MPC8641_HPCN=y +# CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set CONFIG_MPC8641=y # CONFIG_IPIC is not set @@ -211,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +248,8 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +CONFIG_HAS_RAPIDIO=y +# CONFIG_RAPIDIO is not set # # Advanced setup @@ -249,11 +259,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -324,8 +334,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -387,6 +399,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -493,7 +506,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -503,13 +520,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -549,6 +564,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -614,7 +630,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -634,6 +649,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -641,6 +657,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -705,6 +722,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -736,7 +754,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -747,13 +764,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -780,6 +790,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -789,19 +800,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -818,13 +823,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -867,14 +892,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -892,6 +920,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -910,27 +939,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -997,6 +1020,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1071,11 +1095,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1110,16 +1134,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1137,6 +1165,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1156,7 +1185,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1194,10 +1225,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1249,11 +1282,8 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1273,7 +1303,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1343,10 +1372,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1430,9 +1458,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1441,6 +1470,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1448,6 +1478,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1458,6 +1489,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1471,6 +1503,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1482,6 +1515,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1492,52 +1526,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 2d831db..46fffbc 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:35 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:16 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -106,6 +108,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -210,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -231,6 +236,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -240,13 +246,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -294,8 +300,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -419,6 +423,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -485,6 +490,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -517,12 +523,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -551,12 +552,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -584,6 +595,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -592,13 +605,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -620,7 +630,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -678,7 +687,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -722,6 +730,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -733,6 +742,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -740,6 +750,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -748,6 +759,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -757,48 +769,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 82151b9..9df7897 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:35 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:17 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -108,6 +110,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -219,11 +222,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -241,6 +246,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -250,13 +256,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -299,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -492,6 +496,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -516,6 +521,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -548,12 +554,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -570,12 +571,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -599,13 +610,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -618,7 +626,6 @@ CONFIG_DAB=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -676,7 +683,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -719,6 +725,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -729,6 +736,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -736,6 +744,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -746,6 +755,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -756,6 +766,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -766,6 +777,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -778,3 +790,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 1383eb6..bc3bf62 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:36 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:18 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,19 +72,17 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,6 +109,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -196,11 +197,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -225,6 +228,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -234,11 +238,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -293,6 +297,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -513,7 +518,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -593,7 +598,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -611,6 +615,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -618,6 +623,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -692,6 +698,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -726,12 +733,7 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -748,12 +750,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -781,11 +793,14 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_AMD5536UDC is not set @@ -795,6 +810,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA2XX is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -804,6 +820,7 @@ CONFIG_USB_M66592=y CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -812,13 +829,10 @@ CONFIG_USB_ETH=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -888,7 +902,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -967,6 +980,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -979,6 +993,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -986,6 +1001,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -996,6 +1012,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1008,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1019,6 +1037,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1028,46 +1047,76 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index f912168..c6b8357 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:15 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:18 2008 # # CONFIG_PPC64 is not set @@ -33,6 +33,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -92,6 +94,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -117,6 +120,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -215,11 +219,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -241,6 +247,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -250,13 +257,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -304,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -364,6 +369,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -435,6 +441,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -519,7 +526,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -598,7 +605,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -608,7 +618,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -653,6 +662,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -744,7 +754,6 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -763,6 +772,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -770,6 +780,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -832,6 +843,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -855,7 +867,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -866,13 +877,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -898,6 +902,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set CONFIG_I2C_MV64XXX=y # @@ -908,19 +913,13 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -990,12 +989,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1055,11 +1064,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -1074,6 +1085,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1120,10 +1132,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1175,11 +1189,8 @@ CONFIG_RTC_DRV_MAX6900=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1199,7 +1210,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1257,7 +1267,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1300,6 +1309,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1310,6 +1320,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1317,6 +1328,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1326,6 +1338,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1336,48 +1349,78 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig index 3180125..8227510 100644 --- a/arch/powerpc/configs/sbc8641d_defconfig +++ b/arch/powerpc/configs/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Thu Apr 10 18:03:25 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:19 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -116,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -197,7 +202,6 @@ CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -213,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,12 +243,14 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -252,11 +260,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -328,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -534,6 +544,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -610,6 +621,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -727,7 +739,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -743,6 +754,7 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set CONFIG_ATM_DRIVERS=y # CONFIG_ATM_DUMMY is not set @@ -825,6 +837,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -863,13 +876,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -895,6 +901,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -904,19 +911,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -998,12 +999,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -1041,6 +1052,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1049,14 +1062,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1084,8 +1094,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -1145,7 +1155,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1221,6 +1230,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1241,6 +1251,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1251,6 +1262,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1262,6 +1274,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1274,6 +1287,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1289,54 +1303,84 @@ CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index fdbfd39..88f6aa8 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:19 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:20 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -85,6 +87,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,12 +112,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -214,11 +219,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" @@ -242,6 +249,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -251,11 +259,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -358,6 +364,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -433,6 +440,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -513,7 +521,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -638,7 +646,6 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -654,6 +661,7 @@ CONFIG_R8169=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,6 +698,7 @@ CONFIG_R8169=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -717,7 +726,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -728,13 +736,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -761,6 +762,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -770,19 +772,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -799,12 +795,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -841,16 +847,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -865,6 +875,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -885,6 +896,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -922,10 +934,12 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -977,11 +991,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1002,10 +1013,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1138,6 +1148,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1150,6 +1161,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1157,6 +1169,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1166,6 +1179,7 @@ CONFIG_HAS_DMA=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1181,3 +1195,4 @@ CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From b7f09ae583c49d28b2796d2fa5893dcf822e3a10 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Thu, 5 Jun 2008 18:14:44 +0200 Subject: x86, pci-dma.c: don't always add __GFP_NORETRY to gfp Currently arch/x86/kernel/pci-dma.c always adds __GFP_NORETRY to the allocation flags, because it wants to be reasonably sure not to deadlock when calling alloc_pages(). But really that should only be done in two cases: - when allocating memory in the lower 16 MB DMA zone. If there's no free memory there, waiting or OOM killing is of no use - when optimistically trying an allocation in the DMA32 zone when dma_mask < DMA_32BIT_MASK hoping that the allocation happens to fall within the limits of the dma_mask Also blindly adding __GFP_NORETRY to the the gfp variable might not be a good idea since we then also use it when calling dma_ops->alloc_coherent(). Clearing it might also not be a good idea, dma_alloc_coherent()'s caller might have set it on purpose. The gfp variable should not be clobbered. [ mingo@elte.hu: converted to delta patch ontop of previous version. ] Signed-off-by: Miquel van Smoorenburg Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 069e843..dc00a13 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -378,6 +378,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, struct page *page; unsigned long dma_mask = 0; dma_addr_t bus; + int noretry = 0; /* ignore region specifiers */ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); @@ -397,19 +398,25 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dev->dma_mask == NULL) return NULL; + /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ + if (gfp & __GFP_DMA) + noretry = 1; + #ifdef CONFIG_X86_64 /* Why <=? Even when the mask is smaller than 4GB it is often larger than 16MB and in this case we have a chance of finding fitting memory in the next higher zone first. If not retry with true GFP_DMA. -AK */ - if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) + if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) { gfp |= GFP_DMA32; + if (dma_mask < DMA_32BIT_MASK) + noretry = 1; + } #endif again: - /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ page = dma_alloc_pages(dev, - (gfp & GFP_DMA) ? gfp | __GFP_NORETRY : gfp, get_order(size)); + noretry ? gfp | __GFP_NORETRY : gfp, get_order(size)); if (page == NULL) return NULL; -- cgit v0.10.2 From f17c63231c9c2bfc5717af1890ad17312a1c2c1c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 17 Mar 2008 20:52:08 +0300 Subject: [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate fixed-link property in the device tree. If not, ethernet will not work: e0024520:03 not found eth1: Could not attach to PHY IP-Config: Failed to open eth1 Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 5bc09ad..f3083c7 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 711f9a3..0e872a6 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index c11ceb7..1eb8def 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 7c1c7fa..0d44855 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:29 2008 +# Tue Jun 10 09:17:12 2008 # # CONFIG_PPC64 is not set @@ -454,7 +454,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -- cgit v0.10.2 From d1daeabf0da5bfa1943272ce508e2ba785730bf0 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 10 Jun 2008 10:20:53 -0500 Subject: [SCSI] sr: fix corrupt CD data after media change and delay Reported-by: Geert Uytterhoeven If you delay 30s or more before mounting a CD after inserting it then the kernel has the wrong value for the CD size. http://marc.info/?t=121276133000001 The problem is in sr_test_unit_ready(): the function eats unit attentions without adjusting the sdev->changed status. This means that when the CD signals changed media via unit attention, we can ignore it. Fix by making sr_test_unit_ready() adjust the changed status. Tested-by: Geert Uytterhoeven Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 7ee86d4a7..c82df8b 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -178,6 +178,9 @@ int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr) the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, SR_TIMEOUT, retries--); + if (scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION) + sdev->changed = 1; } while (retries > 0 && (!scsi_status_is_good(the_result) || -- cgit v0.10.2 From 24797a344293601f14f49e2d259c3ca447c4f802 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 10 Jun 2008 12:29:49 -0700 Subject: RDMA/nes: Fix off-by-one in nes_reg_user_mr() error path nes_reg_user_mr() should fail if page_count becomes >= 1024 * 512 rather than just testing for strict >, because page_count is essentially used as an index into an array with 1024 * 512 entries, so allowing the loop to continue with page_count == 1024 * 512 means that memory after the end of the array is corrupted. This leads to a crash triggerable by a userspace application that requests registration of a too-big region. Also get rid of the call to pci_free_consistent() here to avoid corrupting state with a double free, since the same memory will be freed in the code jumped to at reg_user_mr_err. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 99b3c4a..d617da9 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -2456,10 +2456,8 @@ static struct ib_mr *nes_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, if ((page_count!=0)&&(page_count<<12)-(region->offset&(4096-1))>=region->length) goto enough_pages; if ((page_count&0x01FF) == 0) { - if (page_count>(1024*512)) { + if (page_count >= 1024 * 512) { ib_umem_release(region); - pci_free_consistent(nesdev->pcidev, 4096, vpbl.pbl_vbase, - vpbl.pbl_pbase); nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index); kfree(nesmr); -- cgit v0.10.2 From 8d6bcd6e219f183aba4fb62bb7065a4db772ac49 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 24 May 2008 16:11:51 +1000 Subject: [POWERPC] bootwrapper: add simpleImage* to list of boot targets Without simpleImage% in the BOOT_TARGETS list, it is impossible to build any of the simpleImages. Signed-off-by: Grant Likely Signed-off-by: Josh Boyer diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 9dcdc03..86096cc 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -154,7 +154,7 @@ all: zImage CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% +BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.% PHONY += $(BOOT_TARGETS) -- cgit v0.10.2 From 83014699b06fb9a300d896c7c49fb8be1c6c5ddc Mon Sep 17 00:00:00 2001 From: stephane eranian Date: Wed, 11 Jun 2008 15:24:13 -0700 Subject: [IA64] perfmon: fix async exit bug Move the cleanup of the async queue to the close callback from the flush callback. This avoids losing asynchronous overflow notifications when the file descriptor is shared by multiple processes and one terminates. Signed-off-by: Stephane Eranian Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 71d0513..7714a97 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1864,11 +1864,6 @@ pfm_flush(struct file *filp, fl_owner_t id) * invoked after, it will find an empty queue and no * signal will be sent. In both case, we are safe */ - if (filp->f_flags & FASYNC) { - DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue)); - pfm_do_fasync (-1, filp, ctx, 0); - } - PROTECT_CTX(ctx, flags); state = ctx->ctx_state; @@ -1999,6 +1994,11 @@ pfm_close(struct inode *inode, struct file *filp) return -EBADF; } + if (filp->f_flags & FASYNC) { + DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue)); + pfm_do_fasync(-1, filp, ctx, 0); + } + PROTECT_CTX(ctx, flags); state = ctx->ctx_state; -- cgit v0.10.2 From 3463a93def55c309f3c0d0a8aaf216be3be42d64 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 11 Jun 2008 17:29:27 -0600 Subject: [IA64] Update check_sal_cache_flush to use platform_send_ipi() check_sal_cache_flush is used to detect broken firmware that drops pending interrupts. The old implementation schedules a timer interrupt for itself in the future by getting the current value of the Interval Timer Counter + 1000 cycles, waits for the interrupt to be pended, calls SAL_CACHE_FLUSH, and finally checks to see if the interrupt is still pending. This implementation can cause problems for virtual machine code if the process of scheduling the timer interrupt takes more than 1000 cycles; the virtual machine can end up sleeping for several hundred years while waiting for the ITC to wrap around. The fix is to use platform_send_ipi. The processor will still send an interrupt to itself, using the IA64_IPI_DM_INT delivery mode, which causes the IPI to look like an external interrupt. The rest of the SAL_CACHE_FLUSH + checking to see if the interrupt is still pending remains unchanged. This fix has been boot tested successfully on: - intel tiger2 - hp rx6600 - hp rx5670 The rx5670 has known buggy firmware, where SAL_CACHE_FLUSH drops pending interrupts. A boot test on this machine showed this message on the console: SAL: SAL_CACHE_FLUSH drops interrupts; PAL_CACHE_FLUSH will be used instead Which proves that the self-inflicted IPI approach is viable. And as expected, the other tested platforms correctly did not display the warning. Signed-off-by: Alex Chiang Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 7e02597..0464173 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -252,11 +252,10 @@ check_sal_cache_flush (void) local_irq_save(flags); /* - * Schedule a timer interrupt, wait until it's reported, and see if - * SAL_CACHE_FLUSH drops it. + * Send ourselves a timer interrupt, wait until it's reported, and see + * if SAL_CACHE_FLUSH drops it. */ - ia64_set_itv(IA64_TIMER_VECTOR); - ia64_set_itm(ia64_get_itc() + 1000); + platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0); while (!ia64_get_irr(IA64_TIMER_VECTOR)) cpu_relax(); -- cgit v0.10.2 From 45aec1ae72fc592f231e9e73ed9ed4d10cfbc0b5 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Tue, 18 Mar 2008 17:00:22 -0700 Subject: x86: PAT export resource_wc in pci sysfs For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 5daa2aa..68ef488 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -36,6 +36,7 @@ files, each with their own function. local_cpus nearby CPU mask (cpumask, ro) resource PCI resource host addresses (ascii, ro) resource0..N PCI resource N, if present (binary, mmap) + resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap) rom PCI ROM resource, if present (binary, ro) subsystem_device PCI subsystem device (ascii, ro) subsystem_vendor PCI subsystem vendor (ascii, ro) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 271d41c..9ec7d39 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -489,13 +489,14 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @kobj: kobject for mapping * @attr: struct bin_attribute for the file being mapped * @vma: struct vm_area_struct passed into the mmap + * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, - struct vm_area_struct *vma) + struct vm_area_struct *vma, int write_combine) { struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); @@ -518,7 +519,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, vma->vm_pgoff += start >> PAGE_SHIFT; mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; - return pci_mmap_page_range(pdev, vma, mmap_type, 0); + return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); +} + +static int +pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 0); +} + +static int +pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 1); } /** @@ -541,9 +556,46 @@ pci_remove_resource_files(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); kfree(res_attr); } + + res_attr = pdev->res_attr_wc[i]; + if (res_attr) { + sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); + kfree(res_attr); + } } } +static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) +{ + /* allocate attribute structure, piggyback attribute name */ + int name_len = write_combine ? 13 : 10; + struct bin_attribute *res_attr; + int retval; + + res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); + if (res_attr) { + char *res_attr_name = (char *)(res_attr + 1); + + if (write_combine) { + pdev->res_attr_wc[num] = res_attr; + sprintf(res_attr_name, "resource%d_wc", num); + res_attr->mmap = pci_mmap_resource_wc; + } else { + pdev->res_attr[num] = res_attr; + sprintf(res_attr_name, "resource%d", num); + res_attr->mmap = pci_mmap_resource_uc; + } + res_attr->attr.name = res_attr_name; + res_attr->attr.mode = S_IRUSR | S_IWUSR; + res_attr->size = pci_resource_len(pdev, num); + res_attr->private = &pdev->resource[num]; + retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); + } else + retval = -ENOMEM; + + return retval; +} + /** * pci_create_resource_files - create resource files in sysfs for @dev * @dev: dev in question @@ -557,31 +609,19 @@ static int pci_create_resource_files(struct pci_dev *pdev) /* Expose the PCI resources from this device as files */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - struct bin_attribute *res_attr; /* skip empty resources */ if (!pci_resource_len(pdev, i)) continue; - /* allocate attribute structure, piggyback attribute name */ - res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC); - if (res_attr) { - char *res_attr_name = (char *)(res_attr + 1); - - pdev->res_attr[i] = res_attr; - sprintf(res_attr_name, "resource%d", i); - res_attr->attr.name = res_attr_name; - res_attr->attr.mode = S_IRUSR | S_IWUSR; - res_attr->size = pci_resource_len(pdev, i); - res_attr->mmap = pci_mmap_resource; - res_attr->private = &pdev->resource[i]; - retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); - if (retval) { - pci_remove_resource_files(pdev); - return retval; - } - } else { - return -ENOMEM; + retval = pci_create_attr(pdev, i, 0); + /* for prefetchable resources, create a WC mappable file */ + if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) + retval = pci_create_attr(pdev, i, 1); + + if (retval) { + pci_remove_resource_files(pdev); + return retval; } } return 0; diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159b..d18b1dd 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -206,6 +206,7 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ + struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */ #ifdef CONFIG_PCI_MSI struct list_head msi_list; #endif -- cgit v0.10.2 From 81d5575a48f49f494289a1299a32e4e5e41fbf40 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 12 Jun 2008 13:51:46 -0700 Subject: PCI: fixup write combine comment in pci_mmap_resource Now that we can actually do write combining properly, there's no need to have the FIXME. Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 9ec7d39..6f3c744 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -492,7 +492,6 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. - * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, -- cgit v0.10.2 From 41ee2ff404ec76194315aeed57ac973b010abe1d Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 13 Jun 2008 15:04:40 +1000 Subject: drm: use drms ioctl cmd not what we get passed from userspace. This enforces us to use the drm ioctl types so read/write works correctly and not believe what userspace tells us. It does this hopefully without breaking the drm api. Fixes bug from thread: BUG: unable to handle kernel NULL pointer dereference (drm_getunique) Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index fc54140..22957ac1 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -475,6 +475,8 @@ int drm_ioctl(struct inode *inode, struct file *filp, else goto err_i1; + /* Do not trust userspace, use our own definition */ + cmd = ioctl->cmd; func = ioctl->func; /* is there a local override? */ if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl) -- cgit v0.10.2 From b554305905d9bc2184b424aa67712119d5c9fb99 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 13 Jun 2008 15:06:31 +1000 Subject: drm: the sg alloc ioctl should write back the handle to userspace Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index 3a05c6d..38d3c6b 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -628,7 +628,7 @@ struct drm_set_version { #define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding) #define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding) -#define DRM_IOCTL_SG_ALLOC DRM_IOW( 0x38, struct drm_scatter_gather) +#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather) #define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather) #define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank) -- cgit v0.10.2 From d385c2a85877f0cb785070094edf9a624c090d68 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 14 Jun 2008 01:01:18 -0400 Subject: ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device The child of a video bus device is not alway a video device. It should be a warn message rather than an exception here. http://bugzilla.kernel.org/show_bug.cgi?id=9761 Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5e5dda3a..d089c45 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1713,7 +1713,8 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video, status = acpi_video_bus_get_one_device(dev, video); if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, "Cant attach device")); + ACPI_DEBUG_PRINT((ACPI_DB_WARN, + "Cant attach device")); continue; } } -- cgit v0.10.2 From f163ff5176a8e9c827d8ebe044710d67d40799c3 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 14 Jun 2008 01:26:37 -0400 Subject: ACPI: no AC status notification http://bugzilla.kernel.org/show_bug.cgi?id=10695 Signed-off-by: Len Brown diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 5b73f6a..831883b 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -233,6 +233,9 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) device = ac->device; switch (event) { + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Unsupported event [0x%x]\n", event)); case ACPI_AC_NOTIFY_STATUS: case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: @@ -244,11 +247,6 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); #endif - break; - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Unsupported event [0x%x]\n", event)); - break; } return; -- cgit v0.10.2 From 3ed7897242b7efe977f3a8d06d4e5a4ebe28b10e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 11 Jun 2008 19:21:00 -0500 Subject: [SCSI] scsi_host regression: fix scsi host leak commit 9c7701088a61cc0cf8a6e1c68d1e74e3cc2ee0b7 Author: Dave Young Date: Tue Jan 22 14:01:34 2008 +0800 scsi: use class iteration api Isn't a correct replacement for the original hand rolled host lookup. The problem is that class_find_child would get a reference to the host's class device which is never released. Since the host class device holds a reference to the host gendev, the host can never be freed. In 2.6.26 we started using class_find_device, and this function also gets a reference to the device, so we end up with an extra ref and the host will not get released. This patch adds a put_device to balance the class_find_device() get. I kept the scsi_host_get in scsi_host_lookup, because the target layer is using scsi_host_lookup and it looks like it needs the SHOST_DEL check. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 3690360..c6457bf 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -456,6 +456,10 @@ static int __scsi_host_match(struct device *dev, void *data) * * Return value: * A pointer to located Scsi_Host or NULL. + * + * The caller must do a scsi_host_put() to drop the reference + * that scsi_host_get() took. The put_device() below dropped + * the reference from class_find_device(). **/ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) { @@ -463,9 +467,10 @@ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) struct Scsi_Host *shost = ERR_PTR(-ENXIO); cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match); - if (cdev) + if (cdev) { shost = scsi_host_get(class_to_shost(cdev)); - + put_device(cdev); + } return shost; } EXPORT_SYMBOL(scsi_host_lookup); -- cgit v0.10.2 From f93daa3f7ff4f0cc13acc7452a00feb1c586102a Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 13 Jun 2008 10:38:00 -0400 Subject: [SCSI] dpt_i2o: Add PROC_IA64 define This fixes the following compile failure: drivers/scsi/dpt_i2o.c:83: error: 'PROC_IA64' undeclared here (not in a function) Mark Salyzyn indicated that IA64 must report itself as PROC_INTEL, so I've changed the comment for PROC_INTEL. Signed-off-by: Jeff Mahoney Acked-by: Mark Salyzyn Signed-off-by: James Bottomley diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h index 72c8992..a6644b3 100644 --- a/drivers/scsi/dpt/dptsig.h +++ b/drivers/scsi/dpt/dptsig.h @@ -85,7 +85,7 @@ typedef unsigned int sigINT; /* ------------------------------------------------------------------ */ /* What type of processor the file is meant to run on. */ /* This will let us know whether to read sigWORDs as high/low or low/high. */ -#define PROC_INTEL 0x00 /* Intel 80x86 */ +#define PROC_INTEL 0x00 /* Intel 80x86/ia64 */ #define PROC_MOTOROLA 0x01 /* Motorola 68K */ #define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */ #define PROC_ALPHA 0x03 /* DEC Alpha */ @@ -104,6 +104,7 @@ typedef unsigned int sigINT; #define PROC_486 0x08 /* Intel 80486 */ #define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */ #define PROC_SEXIUM 0x20 /* Intel 686 aka P6 aka Pentium Pro or MMX */ +#define PROC_IA64 0x40 /* Intel IA64 processor */ /* PROC_i960: */ #define PROC_960RX 0x01 /* Intel 80960RC/RD */ -- cgit v0.10.2 From 62128b2ca812c1266f4ff7bac068bf0b626c6179 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:21 +0200 Subject: opti621: disable read prefetch This fixes 2.6.25 regression (kernel.org bugzilla bug #10723) caused by: commit 912fb29a36a7269ac1c4a4df45bc0ac1d2637972 Author: Bartlomiej Zolnierkiewicz Date: Fri Oct 19 00:30:11 2007 +0200 opti621: always tune PIO ... Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Bisected-by: Juergen Kosel Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 6e99080..e31e0f9 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -102,18 +102,6 @@ * address: 50 ns, data: 50 ns, recovery: 100 ns. */ -/* #define READ_PREFETCH 0 */ -/* Uncomment for disable read prefetch. - * There is some readprefetch capatibility in hdparm, - * but when I type hdparm -P 1 /dev/hda, I got errors - * and till reset drive is inaccessible. - * This (hw) read prefetch is safe on my drive. - */ - -#ifndef READ_PREFETCH -#define READ_PREFETCH 0x40 /* read prefetch is enabled */ -#endif /* else read prefetch is disabled */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -264,7 +252,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); - misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1); + + misc = ((ax - 1) << 4) | ((drdy - 2) << 1); #ifdef OPTI621_DEBUG printk("%s: master: address: %d, data: %d, " -- cgit v0.10.2 From f361037631ba547ea88adf8d2359d810c1b2605a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:21 +0200 Subject: opti621: remove DMA support These controllers don't support DMA. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index e31e0f9..65f18073 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -324,18 +324,14 @@ static const struct ide_port_info opti621_chipsets[] __devinitdata = { .name = "OPTI621", .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, }, { /* 1 */ .name = "OPTI621X", .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, } }; -- cgit v0.10.2 From 21bd33a656a60daadc475ce330272f4410ae27b7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: use PCI clock value provided by controller Use PCI clock value provided by controller instead of depending on a default (or user supplied) value. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 65f18073..7547fa2 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -193,11 +193,10 @@ typedef struct pio_clocks_s { int recovery_time; /* Recovery time (clocks) */ } pio_clocks_t; -static void compute_clocks(int pio, pio_clocks_t *clks) +static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) { if (pio != PIO_NOT_EXIST) { int adr_setup, data_pls; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); adr_setup = ide_pio_timings[pio].setup_time; data_pls = ide_pio_timings[pio].active_time; @@ -234,7 +233,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 pio1 = 0, pio2 = 0; pio_clocks_t first, second; int ax, drdy; - u8 cycle1, cycle2, misc; + u8 cycle1, cycle2, misc, clk; ide_hwif_t *hwif = HWIF(drive); /* sets drive->drive_data for both drives */ @@ -242,8 +241,26 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) pio1 = hwif->drives[0].drive_data; pio2 = hwif->drives[1].drive_data; - compute_clocks(pio1, &first); - compute_clocks(pio2, &second); + spin_lock_irqsave(&opti621_lock, flags); + + reg_base = hwif->io_ports.data_addr; + + /* allow Register-B */ + outb(0xc0, reg_base + CNTRL_REG); + /* hmm, setupvic.exe does this ;-) */ + outb(0xff, reg_base + 5); + /* if reads 0xff, adapter not exist? */ + (void)inb(reg_base + CNTRL_REG); + /* if reads 0xc0, no interface exist? */ + read_reg(CNTRL_REG); + + /* check CLK speed */ + clk = read_reg(STRAP_REG) & 1; + + printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); + + compute_clocks(pio1, &first, clk ? 25 : 33); + compute_clocks(pio2, &second, clk ? 25 : 33); /* ax = max(a1,a2) */ ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; @@ -266,21 +283,6 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) second.recovery_time, drdy); #endif - spin_lock_irqsave(&opti621_lock, flags); - - reg_base = hwif->io_ports.data_addr; - - /* allow Register-B */ - outb(0xc0, reg_base + CNTRL_REG); - /* hmm, setupvic.exe does this ;-) */ - outb(0xff, reg_base + 5); - /* if reads 0xff, adapter not exist? */ - (void)inb(reg_base + CNTRL_REG); - /* if reads 0xc0, no interface exist? */ - read_reg(CNTRL_REG); - /* read version, probably 0 */ - read_reg(STRAP_REG); - /* program primary drive */ /* select Index-0 for Register-A */ write_reg(0, MISC_REG); -- cgit v0.10.2 From 6c987183fcc3c6cb9eb77fd0b3e8ca1ac98a4813 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: program devices timings separately in ->set_pio_mode * Set drive->drive_data to 'pio + XFER_PIO_0' instead of 'pio', then simplify selecting maximum adress setup timing. * Remove no longer needed compute_pios() and opti621_port_init_devs(). * Program devices timings separately in ->set_pio_mode. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 7547fa2..c746e6f 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -115,34 +115,6 @@ static int reg_base; static DEFINE_SPINLOCK(opti621_lock); -/* there are stored pio numbers from other calls of opti621_set_pio_mode */ -static void compute_pios(ide_drive_t *drive, const u8 pio) -/* Store values into drive->drive_data - * second_contr - 0 for primary controller, 1 for secondary - * slave_drive - 0 -> pio is for master, 1 -> pio is for slave - * pio - PIO mode for selected drive (for other we don't know) - */ -{ - int d; - ide_hwif_t *hwif = HWIF(drive); - - drive->drive_data = pio; - - for (d = 0; d < 2; ++d) { - drive = &hwif->drives[d]; - if (drive->present) { - if (drive->drive_data == PIO_DONT_KNOW) - drive->drive_data = ide_get_best_pio_mode(drive, 255, 3); -#ifdef OPTI621_DEBUG - printk("%s: Selected PIO mode %d\n", - drive->name, drive->drive_data); -#endif - } else { - drive->drive_data = PIO_NOT_EXIST; - } - } -} - static int cmpt_clk(int time, int bus_speed) /* Returns (rounded up) time in clocks for time in ns, * with bus_speed in MHz. @@ -226,20 +198,19 @@ static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { - /* primary and secondary drives share some registers, - * so we have to program both drives - */ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - u8 pio1 = 0, pio2 = 0; pio_clocks_t first, second; int ax, drdy; - u8 cycle1, cycle2, misc, clk; - ide_hwif_t *hwif = HWIF(drive); + u8 cycle1, misc, clk, addr_pio = pio; - /* sets drive->drive_data for both drives */ - compute_pios(drive, pio); - pio1 = hwif->drives[0].drive_data; - pio2 = hwif->drives[1].drive_data; + drive->drive_data = XFER_PIO_0 + pio; + + if (pair->present) { + if (pair->drive_data && pair->drive_data < drive->drive_data) + addr_pio = pair->drive_data - XFER_PIO_0; + } spin_lock_irqsave(&opti621_lock, flags); @@ -259,8 +230,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - compute_clocks(pio1, &first, clk ? 25 : 33); - compute_clocks(pio2, &second, clk ? 25 : 33); + compute_clocks(pio, &first, clk ? 25 : 33); + compute_clocks(addr_pio, &second, clk ? 25 : 33); /* ax = max(a1,a2) */ ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; @@ -268,37 +239,23 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); misc = ((ax - 1) << 4) | ((drdy - 2) << 1); #ifdef OPTI621_DEBUG - printk("%s: master: address: %d, data: %d, " + printk("%s: address: %d, data: %d, " "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, first.data_time, + drive->name, ax, first.data_time, first.recovery_time, drdy); - printk("%s: slave: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, second.data_time, - second.recovery_time, drdy); #endif - /* program primary drive */ - /* select Index-0 for Register-A */ - write_reg(0, MISC_REG); + /* select Index-0/1 for Register-A/B */ + write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ write_reg(cycle1, READ_REG); /* set write cycle timings */ write_reg(cycle1, WRITE_REG); - /* program secondary drive */ - /* select Index-1 for Register-B */ - write_reg(1, MISC_REG); - /* set read cycle timings */ - write_reg(cycle2, READ_REG); - /* set write cycle timings */ - write_reg(cycle2, WRITE_REG); - /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ write_reg(0x85, CNTRL_REG); @@ -310,14 +267,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&opti621_lock, flags); } -static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) -{ - hwif->drives[0].drive_data = PIO_DONT_KNOW; - hwif->drives[1].drive_data = PIO_DONT_KNOW; -} - static const struct ide_port_ops opti621_port_ops = { - .port_init_devs = opti621_port_init_devs, .set_pio_mode = opti621_set_pio_mode, }; -- cgit v0.10.2 From 810253d44bc92b44b66cd9944b579de54c0cd3ff Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: use pre-calculated PIO timings * Use pre-calculated PIO timings in ->set_pio_mode. * Remove no longer needed compute_clocks(), cmpt_clk(), struct pio_clocks_s, PIO_* defines and OPTI621_DEBUG define. There should be no functional changes caused by this patch. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index c746e6f..8c715b7 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -81,8 +81,6 @@ * 0.5 doesn't work. */ -#define OPTI621_DEBUG /* define for debug messages */ - #include #include #include @@ -110,23 +108,8 @@ static int reg_base; -#define PIO_NOT_EXIST 254 -#define PIO_DONT_KNOW 255 - static DEFINE_SPINLOCK(opti621_lock); -static int cmpt_clk(int time, int bus_speed) -/* Returns (rounded up) time in clocks for time in ns, - * with bus_speed in MHz. - * Example: bus_speed = 40 MHz, time = 80 ns - * 1000/40 = 25 ns (clk value), - * 80/25 = 3.2, rounded up to 4 (I hope ;-)). - * Use idebus=xx to select right frequency. - */ -{ - return ((time*bus_speed+999)/1000); -} - /* Write value to register reg, base of register * is at reg_base (0x1f0 primary, 0x170 secondary, * if not changed by PCI configuration). @@ -159,51 +142,22 @@ static u8 read_reg(int reg) return ret; } -typedef struct pio_clocks_s { - int address_time; /* Address setup (clocks) */ - int data_time; /* Active/data pulse (clocks) */ - int recovery_time; /* Recovery time (clocks) */ -} pio_clocks_t; - -static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) -{ - if (pio != PIO_NOT_EXIST) { - int adr_setup, data_pls; - - adr_setup = ide_pio_timings[pio].setup_time; - data_pls = ide_pio_timings[pio].active_time; - clks->address_time = cmpt_clk(adr_setup, bus_speed); - clks->data_time = cmpt_clk(data_pls, bus_speed); - clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time - - adr_setup-data_pls, bus_speed); - if (clks->address_time < 1) - clks->address_time = 1; - if (clks->address_time > 4) - clks->address_time = 4; - if (clks->data_time < 1) - clks->data_time = 1; - if (clks->data_time > 16) - clks->data_time = 16; - if (clks->recovery_time < 2) - clks->recovery_time = 2; - if (clks->recovery_time > 17) - clks->recovery_time = 17; - } else { - clks->address_time = 1; - clks->data_time = 1; - clks->recovery_time = 2; - /* minimal values */ - } -} - static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - pio_clocks_t first, second; - int ax, drdy; - u8 cycle1, misc, clk, addr_pio = pio; + u8 tim, misc, addr_pio = pio, clk; + + /* DRDY is default 2 (by OPTi Databook) */ + static const u8 addr_timings[2][4] = { + { 0x20, 0x10, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00 }, /* 25 MHz */ + }; + static const u8 data_rec_timings[2][4] = { + { 0x5b, 0x45, 0x32, 0x21 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10 } /* 25 MHz */ + }; drive->drive_data = XFER_PIO_0 + pio; @@ -230,31 +184,15 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - compute_clocks(pio, &first, clk ? 25 : 33); - compute_clocks(addr_pio, &second, clk ? 25 : 33); - - /* ax = max(a1,a2) */ - ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; - - drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ - - cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - - misc = ((ax - 1) << 4) | ((drdy - 2) << 1); - -#ifdef OPTI621_DEBUG - printk("%s: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - drive->name, ax, first.data_time, - first.recovery_time, drdy); -#endif + tim = data_rec_timings[clk][pio]; + misc = addr_timings[clk][addr_pio]; /* select Index-0/1 for Register-A/B */ write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ - write_reg(cycle1, READ_REG); + write_reg(tim, READ_REG); /* set write cycle timings */ - write_reg(cycle1, WRITE_REG); + write_reg(tim, WRITE_REG); /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ -- cgit v0.10.2 From 80a65fc5ee04497e6c28bdaefc44d375b19c4a79 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: add PIO 4 support * Add PIO 4 support. While at it: * Use a single struct ide_port_info instance for OPTi621 and OPTi621X. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 8c715b7..725c805 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -90,16 +90,6 @@ #include -//#define OPTI621_MAX_PIO 3 -/* In fact, I do not have any PIO 4 drive - * (address: 25 ns, data: 70 ns, recovery: 35 ns), - * but OPTi 82C621 is programmable and it can do (minimal values): - * on 40MHz PCI bus (pulse 25 ns): - * address: 25 ns, data: 25 ns, recovery: 50 ns; - * on 20MHz PCI bus (pulse 50 ns): - * address: 50 ns, data: 50 ns, recovery: 100 ns. - */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -150,13 +140,13 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 tim, misc, addr_pio = pio, clk; /* DRDY is default 2 (by OPTi Databook) */ - static const u8 addr_timings[2][4] = { - { 0x20, 0x10, 0x00, 0x00 }, /* 33 MHz */ - { 0x10, 0x10, 0x00, 0x00 }, /* 25 MHz */ + static const u8 addr_timings[2][5] = { + { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */ }; - static const u8 data_rec_timings[2][4] = { - { 0x5b, 0x45, 0x32, 0x21 }, /* 33 MHz */ - { 0x48, 0x34, 0x21, 0x10 } /* 25 MHz */ + static const u8 data_rec_timings[2][5] = { + { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ }; drive->drive_data = XFER_PIO_0 + pio; @@ -209,30 +199,22 @@ static const struct ide_port_ops opti621_port_ops = { .set_pio_mode = opti621_set_pio_mode, }; -static const struct ide_port_info opti621_chipsets[] __devinitdata = { - { /* 0 */ - .name = "OPTI621", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_NO_DMA, - .pio_mask = ATA_PIO3, - }, { /* 1 */ - .name = "OPTI621X", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_NO_DMA, - .pio_mask = ATA_PIO3, - } +static const struct ide_port_info opti621_chipset __devinitdata = { + .name = "OPTI621/X", + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, + .pio_mask = ATA_PIO4, }; static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]); + return ide_setup_pci_device(dev, &opti621_chipset); } static const struct pci_device_id opti621_pci_tbl[] = { { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 }, + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); -- cgit v0.10.2 From c1a8e39819bd6797ee2b82b88517268d39921b03 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: bugfix for media-bay support rework Fix bug introduced by: commit 2dde7861afa23cd59db83515cb0b810b92b220aa Author: Bartlomiej Zolnierkiewicz Date: Fri Apr 18 00:46:23 2008 +0200 ide: rework PowerMac media-bay support (take 2) ... [ Yeah, I suck. ] bay->cd_index shouldn't be changed if IDE devices are not present or retry operations won't happen. Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 82add26..c34bdf8 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -556,7 +556,8 @@ static void media_bay_step(int i) printk("mediabay %d, registering IDE...\n", i); pmu_suspend(); ide_port_scan(bay->cd_port); - bay->cd_index = bay->cd_port->index; + if (bay->cd_port->present) + bay->cd_index = bay->cd_port->index; pmu_resume(); } if (bay->cd_index == -1) { -- cgit v0.10.2 From 07a6c66da53f646a39103290bfbd85be18892895 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: add ->cable_detect method Add ->cable_detect method and remove no longer needed pmif->cable_80 flag (there is also no need to mask ->udma_mask now). This fixes: - forced ignoring of cable detection (needed for some CF devices & debug) - cable detection for warm-plug Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 48aa019..7f669a9 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -59,7 +59,6 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned cable_80 : 1; unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; @@ -918,10 +917,40 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) +{ + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif); + struct device_node *np = pmif->node; + const char *cable = of_get_property(np, "cable-type", NULL); + + /* Get cable type from device-tree. */ + if (cable && !strncmp(cable, "80-", 3)) + return ATA_CBL_PATA80; + + /* + * G5's seem to have incorrect cable type in device-tree. + * Let's assume they have a 80 conductor cable, this seem + * to be always the case unless the user mucked around. + */ + if (of_device_is_compatible(np, "K2-UATA") || + of_device_is_compatible(np, "shasta-ata")) + return ATA_CBL_PATA80; + + return ATA_CBL_PATA40; +} + static const struct ide_port_ops pmac_ide_ata6_port_ops = { .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_kauai_selectproc, + .cable_detect = pmac_ide_cable_detect, +}; + +static const struct ide_port_ops pmac_ide_ata4_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, + .cable_detect = pmac_ide_cable_detect, }; static const struct ide_port_ops pmac_ide_port_ops = { @@ -962,7 +991,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = pmac_port_info; - pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; @@ -979,6 +1007,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA4; } else pmif->kind = controller_kl_ata3; @@ -992,22 +1021,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) bidp = of_get_property(np, "AAPL,bus-id", NULL); pmif->aapl_bus_id = bidp ? *bidp : 0; - /* Get cable type from device-tree */ - if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) { - const char* cable = of_get_property(np, "cable-type", NULL); - if (cable && !strncmp(cable, "80-", 3)) - pmif->cable_80 = 1; - } - /* G5's seem to have incorrect cable type in device-tree. Let's assume - * they have a 80 conductor cable, this seem to be always the case unless - * the user mucked around - */ - if (of_device_is_compatible(np, "K2-UATA") || - of_device_is_compatible(np, "shasta-ata")) - pmif->cable_80 = 1; - /* On Kauai-type controllers, we make sure the FCR is correct */ if (pmif->kauai_fcr) writel(KAUAI_FCR_UATA_MAGIC | @@ -1053,7 +1066,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) hwif->hwif_data = pmif; ide_init_port_hw(hwif, hw); - hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, @@ -1070,11 +1082,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - if (pmif->cable_80 == 0) - d.udma_mask &= ATA_UDMA2; -#endif - idx[0] = hwif->index; ide_device_add(idx, &d); -- cgit v0.10.2 From 5b16464ac32a92c2332030d11ec445bddeb141fa Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: remove bogus comment about pmac_ide_setup_device() Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 7f669a9..ba2d587 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -978,10 +978,7 @@ static const struct ide_port_info pmac_port_info = { /* * Setup, register & probe an IDE channel driven by this driver, this is - * called by one of the 2 probe functions (macio or PCI). Note that a channel - * that ends up beeing free of any device is not kept around by this driver - * (it is kept in 2.4). This introduce an interface numbering change on some - * rare machines unfortunately, but it's better this way. + * called by one of the 2 probe functions (macio or PCI). */ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) -- cgit v0.10.2 From 792a1a98560a2a1619491eed8b18fccb09b312a7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index aa2ea3d..d08107d 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -194,6 +194,16 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, if (hwif->present) return hwif; + /* retry registration in case device is still spinning up */ + for (i = 0; i < 10; i++) { + msleep(100); + ide_port_scan(hwif); + if (hwif->present) + return hwif; + } + + return hwif; + out_release: release_region(ctl, 1); release_region(io, 8); @@ -222,7 +232,7 @@ static int ide_config(struct pcmcia_device *link) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int i, pass, last_ret = 0, last_fn = 0, is_kme = 0; + int pass, last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; ide_hwif_t *hwif; @@ -319,30 +329,15 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - /* retry registration in case device is still spinning up */ - for (i = 0; i < 10; i++) { - hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (hwif) - break; - if (link->io.NumPorts1 == 0x20) { + hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + if (hwif == NULL && link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); hwif = idecs_register(io_base + 0x10, ctl_base + 0x10, link->irq.AssignedIRQ, link); - if (hwif) { - io_base += 0x10; - ctl_base += 0x10; - break; - } - } - msleep(100); } - if (hwif == NULL) { - printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx" - ", irq %u failed\n", io_base, ctl_base, - link->irq.AssignedIRQ); + if (hwif == NULL) goto failed; - } info->ndev = 1; sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2); -- cgit v0.10.2 From fbc69fd9b76158daaa83e5372e44fdd81df20f92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-cs: fix releasing I/O resources hwif content is already freed after ide_release() call so cache hwif->io_ports.{data,ctl}_addr in local variables in ide_detach(). This fixes post-2.6.25 regression. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index d08107d..f633b6b 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -135,13 +135,17 @@ static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; ide_hwif_t *hwif = info->hwif; + unsigned long data_addr, ctl_addr; DEBUG(0, "ide_detach(0x%p)\n", link); + data_addr = hwif->io_ports.data_addr; + ctl_addr = hwif->io_ports.ctl_addr; + ide_release(link); - release_region(hwif->io_ports.ctl_addr, 1); - release_region(hwif->io_ports.data_addr, 8); + release_region(ctl_addr, 1); + release_region(data_addr, 8); kfree(info); } /* ide_detach */ -- cgit v0.10.2 From 0cbccbc30a60ff60dbeb203154f1f527c632de9b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:24 +0200 Subject: ide-generic: don't probe all legacy ISA IDE ports by default We can't probe all legacy ISA IDE ports by default as the resources may be occupied by other ISA devices. Add "probe_mask" module parameter and probe only first two ISA IDE ports by default leaving the decision about probing the rest to the user (systems with ISA ide2-6 should be very, very rare). This fixes a regression caused by: commit 343a3451e20314d5959b59b992e33fbaadfe52bf Author: Bartlomiej Zolnierkiewicz Date: Tue Jun 10 20:56:36 2008 +0200 ide-generic: add missing hwif->chipset setup ... Reported-by: Mikael Pettersson Bisected-by: Mikael Pettersson Tested-by: Mikael Pettersson Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 9134488..2d92214 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -22,6 +22,10 @@ #define DRV_NAME "ide_generic" +static int probe_mask = 0x03; +module_param(probe_mask, int, 0); +MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); + static ssize_t store_add(struct class *cls, const char *buf, size_t n) { ide_hwif_t *hwif; @@ -89,6 +93,9 @@ static int __init ide_generic_init(void) u8 idx[MAX_HWIFS]; int i; + printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module " + "parameter for probing all legacy ISA IDE ports\n"); + for (i = 0; i < MAX_HWIFS; i++) { ide_hwif_t *hwif; unsigned long io_addr = ide_default_io_base(i); @@ -96,7 +103,7 @@ static int __init ide_generic_init(void) idx[i] = 0xff; - if (io_addr) { + if ((probe_mask & (1 << i)) && io_addr) { if (!request_region(io_addr, 8, DRV_NAME)) { printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " "not free.\n", -- cgit v0.10.2 From b92dea67cc66970cda6b5b11895d08e35b4618e7 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 15 Jun 2008 23:20:50 +1000 Subject: virtio: Complete feature negotation before updating status lguest (in rusty's use-tun-ringfd patch) assumes that the guest has updated its feature bits before setting its status to VIRTIO_CONFIG_S_DRIVER_OK. That's pretty reasonable, so let's make it so. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 0f3c2bb..7084e7e 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -124,9 +124,9 @@ static int virtio_dev_probe(struct device *_d) if (err) add_status(dev, VIRTIO_CONFIG_S_FAILED); else { - add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); /* They should never have set feature bits beyond 32 */ dev->config->set_features(dev, dev->features[0]); + add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); } return err; } -- cgit v0.10.2 From d84050f48ebba73994b93ccf61cea2364dac8d75 Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Thu, 29 May 2008 17:46:10 -0300 Subject: powerpc/spufs: wait for stable spu status in spu_stopped() If the spu is stopping (ie, the SPU_STATUS_RUNNING bit is still set), re-read the register to get the final stopped value. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index b7493b8..0046bcf 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -51,14 +51,22 @@ int spu_stopped(struct spu_context *ctx, u32 *stat) u64 dsisr; u32 stopped; - *stat = ctx->ops->status_read(ctx); + stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; - if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) +top: + *stat = ctx->ops->status_read(ctx); + if (*stat & stopped) { + /* + * If the spu hasn't finished stopping, we need to + * re-read the register to get the stopped value. + */ + if (*stat & SPU_STATUS_RUNNING) + goto top; return 1; + } - stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | - SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; - if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped)) + if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) return 1; dsisr = ctx->csa.class_0_dsisr; -- cgit v0.10.2 From 1f64643aa5f5a17f1723f7ea0f17b7a3a8f632b3 Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Thu, 5 Jun 2008 17:30:25 +0800 Subject: powerpc/spufs: remove class_0_dsisr from spu exception handling According to the CBEA, the SPU dsisr is not updated for class 0 exceptions. spu_stopped() is testing the dsisr that was passed to it from the class 0 exception handler, so we return a false positive here. This patch cleans up the interrupt handler and erroneous tests in spu_stopped. It also removes the fields from the csa since it is not needed to process class 0 events. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 70c6601..96b5f0f 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -324,14 +324,12 @@ spu_irq_class_0(int irq, void *data) stat = spu_int_stat_get(spu, 0) & mask; spu->class_0_pending |= stat; - spu->class_0_dsisr = spu_mfc_dsisr_get(spu); spu->class_0_dar = spu_mfc_dar_get(spu); spin_unlock(&spu->register_lock); spu->stop_callback(spu, 0); spu->class_0_pending = 0; - spu->class_0_dsisr = 0; spu->class_0_dar = 0; spu_int_stat_clear(spu, 0, stat); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 0046bcf..f7edba6 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -27,7 +27,6 @@ void spufs_stop_callback(struct spu *spu, int irq) switch(irq) { case 0 : ctx->csa.class_0_pending = spu->class_0_pending; - ctx->csa.class_0_dsisr = spu->class_0_dsisr; ctx->csa.class_0_dar = spu->class_0_dar; break; case 1 : @@ -69,10 +68,6 @@ top: if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) return 1; - dsisr = ctx->csa.class_0_dsisr; - if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) - return 1; - dsisr = ctx->csa.class_1_dsisr; if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) return 1; diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1702de9..bfcf70e 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2844,7 +2844,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%lx", flags); DUMP_FIELD(spu, "%d", class_0_pending); DUMP_FIELD(spu, "0x%lx", class_0_dar); - DUMP_FIELD(spu, "0x%lx", class_0_dsisr); DUMP_FIELD(spu, "0x%lx", class_1_dar); DUMP_FIELD(spu, "0x%lx", class_1_dsisr); DUMP_FIELD(spu, "0x%lx", irqs[0]); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 6abead6..99348c1 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -131,7 +131,6 @@ struct spu { u64 flags; u64 class_0_pending; u64 class_0_dar; - u64 class_0_dsisr; u64 class_1_dar; u64 class_1_dsisr; size_t ls_size; diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index 129ec14..a40fd49 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -254,7 +254,7 @@ struct spu_state { u64 spu_chnldata_RW[32]; u32 spu_mailbox_data[4]; u32 pu_mailbox_data[1]; - u64 class_0_dar, class_0_dsisr, class_0_pending; + u64 class_0_dar, class_0_pending; u64 class_1_dar, class_1_dsisr; unsigned long suspend_time; spinlock_t register_lock; -- cgit v0.10.2 From 2c911a14b74fa9cf815a936f310e4fa85bee77ce Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Fri, 13 Jun 2008 14:17:35 +1000 Subject: powerpc/spufs: synchronize interaction between spu exception handling and time slicing Time slicing can occur at the same time as spu exception handling resulting in the wakeup of the wrong thread. This change uses the the spu's register_lock to enforce synchronization between bind/unbind and spu exception handling so that they are mutually exclusive. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 96b5f0f..78f905b 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -219,15 +219,25 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) { + int ret; + pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea); - /* Handle kernel space hash faults immediately. - User hash faults need to be deferred to process context. */ - if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) - && REGION_ID(ea) != USER_REGION_ID - && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) { - spu_restart_dma(spu); - return 0; + /* + * Handle kernel space hash faults immediately. User hash + * faults need to be deferred to process context. + */ + if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) && + (REGION_ID(ea) != USER_REGION_ID)) { + + spin_unlock(&spu->register_lock); + ret = hash_page(ea, _PAGE_PRESENT, 0x300); + spin_lock(&spu->register_lock); + + if (!ret) { + spu_restart_dma(spu); + return 0; + } } spu->class_1_dar = ea; @@ -325,14 +335,12 @@ spu_irq_class_0(int irq, void *data) spu->class_0_pending |= stat; spu->class_0_dar = spu_mfc_dar_get(spu); - spin_unlock(&spu->register_lock); - spu->stop_callback(spu, 0); - spu->class_0_pending = 0; spu->class_0_dar = 0; spu_int_stat_clear(spu, 0, stat); + spin_unlock(&spu->register_lock); return IRQ_HANDLED; } @@ -355,13 +363,12 @@ spu_irq_class_1(int irq, void *data) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); - if (stat & CLASS1_SEGMENT_FAULT_INTR) - __spu_trap_data_seg(spu, dar); - - spin_unlock(&spu->register_lock); pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat, dar, dsisr); + if (stat & CLASS1_SEGMENT_FAULT_INTR) + __spu_trap_data_seg(spu, dar); + if (stat & CLASS1_STORAGE_FAULT_INTR) __spu_trap_data_map(spu, dar, dsisr); @@ -374,6 +381,8 @@ spu_irq_class_1(int irq, void *data) spu->class_1_dsisr = 0; spu->class_1_dar = 0; + spin_unlock(&spu->register_lock); + return stat ? IRQ_HANDLED : IRQ_NONE; } @@ -392,14 +401,12 @@ spu_irq_class_2(int irq, void *data) mask = spu_int_mask_get(spu, 2); /* ignore interrupts we're not waiting for */ stat &= mask; - /* mailbox interrupts are level triggered. mask them now before * acknowledging */ if (stat & mailbox_intrs) spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs)); /* acknowledge all interrupts before the callbacks */ spu_int_stat_clear(spu, 2, stat); - spin_unlock(&spu->register_lock); pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask); @@ -419,6 +426,9 @@ spu_irq_class_2(int irq, void *data) spu->wbox_callback(spu); spu->stats.class2_intr++; + + spin_unlock(&spu->register_lock); + return stat ? IRQ_HANDLED : IRQ_NONE; } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 745dd51..cd72567 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -230,19 +230,23 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) ctx->stats.slb_flt_base = spu->stats.slb_flt; ctx->stats.class2_intr_base = spu->stats.class2_intr; + spu_associate_mm(spu, ctx->owner); + + spin_lock_irq(&spu->register_lock); spu->ctx = ctx; spu->flags = 0; ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; spu->tgid = current->tgid; - spu_associate_mm(spu, ctx->owner); spu->ibox_callback = spufs_ibox_callback; spu->wbox_callback = spufs_wbox_callback; spu->stop_callback = spufs_stop_callback; spu->mfc_callback = spufs_mfc_callback; - mb(); + spin_unlock_irq(&spu->register_lock); + spu_unmap_mappings(ctx); + spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0); spu_restore(&ctx->csa, spu); spu->timestamp = jiffies; @@ -423,18 +427,22 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0); + + spin_lock_irq(&spu->register_lock); spu->timestamp = jiffies; ctx->state = SPU_STATE_SAVED; spu->ibox_callback = NULL; spu->wbox_callback = NULL; spu->stop_callback = NULL; spu->mfc_callback = NULL; - spu_associate_mm(spu, NULL); spu->pid = 0; spu->tgid = 0; ctx->ops = &spu_backing_ops; spu->flags = 0; spu->ctx = NULL; + spin_unlock_irq(&spu->register_lock); + + spu_associate_mm(spu, NULL); ctx->stats.slb_flt += (spu->stats.slb_flt - ctx->stats.slb_flt_base); -- cgit v0.10.2 From 028fda0a6c80c26f1d9f403b4490b9ddc74ffa3b Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Mon, 16 Jun 2008 10:42:38 +1000 Subject: powerpc/spufs: fix missed stop-and-signal event There is a delay in the transition to the stopped state for class 2 interrupts. In some cases, the controlling thread detects the state of the spu as running, and goes back to sleep resulting in a hung application as the event is missed. This change detects the stop condition and re-generates the wakeup event after a context save. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index cd72567..e929e70 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -407,6 +407,8 @@ static int has_affinity(struct spu_context *ctx) */ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) { + u32 status; + spu_context_trace(spu_unbind_context__enter, ctx, spu); spuctx_switch_state(ctx, SPU_UTIL_SYSTEM); @@ -452,6 +454,9 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) /* This maps the underlying spu state to idle */ spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); ctx->spu = NULL; + + if (spu_stopped(ctx, &status)) + wake_up_all(&ctx->stop_wq); } /** -- cgit v0.10.2 From 598056d5af8fef1dbe8f96f5c2b641a528184e5a Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 22 May 2008 00:10:56 +1000 Subject: [POWERPC] Fix rmb to order cacheable vs. noncacheable lwsync is explicitly defined not to have any effect on the ordering of accesses to device memory, so it cannot be used for rmb(). sync appears to be the only barrier which fits the bill. Signed-off-by: Nick Piggin Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 2b6559a..5235f87 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -34,7 +34,7 @@ * SMP since it is only used to order updates to system memory. */ #define mb() __asm__ __volatile__ ("sync" : : : "memory") -#define rmb() __asm__ __volatile__ (__stringify(LWSYNC) : : : "memory") +#define rmb() __asm__ __volatile__ ("sync" : : : "memory") #define wmb() __asm__ __volatile__ ("sync" : : : "memory") #define read_barrier_depends() do { } while(0) -- cgit v0.10.2 From 476ff8a0e3b17fc23994255aa9fd917d599d2ec7 Mon Sep 17 00:00:00 2001 From: Emil Medve Date: Fri, 23 May 2008 05:49:22 +1000 Subject: [POWERPC] Fix return value check logic in debugfs virq_mapping setup debugfs_create_file() returns a non-NULL (non-zero) value in case of success, not a NULL value. This fixes this non-critical boot-time debugging error message: [ 1.316386] calling irq_debugfs_init+0x0/0x50 [ 1.316399] initcall irq_debugfs_init+0x0/0x50 returned -12 after 0 msecs [ 1.316411] initcall irq_debugfs_init+0x0/0x50 returned with error code -12 Signed-off-by: Emil Medve Acked-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2f73f70..bcc249d 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -1073,7 +1073,7 @@ static const struct file_operations virq_debug_fops = { static int __init irq_debugfs_init(void) { if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root, - NULL, &virq_debug_fops)) + NULL, &virq_debug_fops) == NULL) return -ENOMEM; return 0; -- cgit v0.10.2 From bad5232ba266ae2c666c17be236152fb2d8ada3b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:20:04 +1000 Subject: [POWERPC] Add missing of_node_put in pseries/nvram.c of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index f68903e..42f7e38 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -131,8 +131,10 @@ int __init pSeries_nvram_init(void) return -ENODEV; nbytes_p = of_get_property(nvram, "#bytes", &proplen); - if (nbytes_p == NULL || proplen != sizeof(unsigned int)) + if (nbytes_p == NULL || proplen != sizeof(unsigned int)) { + of_node_put(nvram); return -EIO; + } nvram_size = *nbytes_p; -- cgit v0.10.2 From 8b9dba2ce28f64246198704b23f133bed5429e62 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:20:42 +1000 Subject: [POWERPC] Add missing of_node_put in drivers/macintosh/smu.c of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 77ad192..d86d57a 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -483,12 +483,15 @@ int __init smu_init (void) if (smu_cmdbuf_abs == 0) { printk(KERN_ERR "SMU: Command buffer not allocated !\n"); + of_node_put(np); return -EINVAL; } smu = alloc_bootmem(sizeof(struct smu_device)); - if (smu == NULL) + if (smu == NULL) { + of_node_put(np); return -ENOMEM; + } memset(smu, 0, sizeof(*smu)); spin_lock_init(&smu->lock); -- cgit v0.10.2 From 958a65f205fdc5ce5461d79376073b89acc51b31 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:21:51 +1000 Subject: [POWERPC] Add missing of_node_put in drivers/macintosh/therm_adt746x.c of_node_put is needed before discarding a value received from of_find_node_by_name, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; statement S; identifier f; expression E; constant C; @@ n = of_find_node_by_name(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f(n,...) when != E = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n1 = f(n,...) | E = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 54f4942..5366dc93 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -562,18 +562,24 @@ thermostat_init(void) therm_type = ADT7460; else if (of_device_is_compatible(np, "adt7467")) therm_type = ADT7467; - else + else { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "hwsensor-params-version", NULL); printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop, (*prop == 1)?"":"un"); - if (*prop != 1) + if (*prop != 1) { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "reg", NULL); - if (!prop) + if (!prop) { + of_node_put(np); return -ENODEV; + } /* look for bus either by path or using "reg" */ if (strstr(np->full_name, "/i2c-bus@") != NULL) { @@ -610,6 +616,7 @@ thermostat_init(void) if (of_dev == NULL) { printk(KERN_ERR "Can't register temperatures device !\n"); + of_node_put(np); return -ENODEV; } -- cgit v0.10.2 From 8e01520c06c65a1a376059199fc24d4f3d606991 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 10 Jun 2008 09:26:10 +1000 Subject: [POWERPC] Fix warning in pseries/eeh_driver.c Fix this: /usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c: In function 'print_device_node_tree': /usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c:55: warning: ISO C90 forbids mixed declarations and code also make that function look like it's part of Linux. Signed-off-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 68ea5ee..8c1ca47 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -42,17 +42,20 @@ static inline const char * pcid_name (struct pci_dev *pdev) } #ifdef DEBUG -static void print_device_node_tree (struct pci_dn *pdn, int dent) +static void print_device_node_tree(struct pci_dn *pdn, int dent) { int i; - if (!pdn) return; - for (i=0;inode->name, pdn->eeh_mode, pdn->eeh_config_addr, pdn->eeh_pe_config_addr, pdn->node->full_name); dent += 3; - struct device_node *pc = pdn->node->child; + pc = pdn->node->child; while (pc) { print_device_node_tree(PCI_DN(pc), dent); pc = pc->sibling; -- cgit v0.10.2 From 305c73687157d677bee6f2a5dbee438d844a028c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 11 Jun 2008 03:47:45 +1000 Subject: [POWERPC] Build fix for drivers/macintosh/mediabay.c This fixes the following build error with CONFIG_BLK_DEV_IDE_PMAC=n: <-- snip --> ... CC drivers/macintosh/mediabay.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c: In function 'check_media_bay': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c:428: error: 'struct media_bay_info' has no member named 'cd_index' make[3]: *** [drivers/macintosh/mediabay.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index c34bdf8..818aba3 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -84,7 +84,7 @@ struct media_bay_info { int cd_irq; int cd_retry; #endif -#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY) +#if defined(CONFIG_BLK_DEV_IDE_PMAC) int cd_index; #endif }; @@ -417,6 +417,7 @@ static void poll_media_bay(struct media_bay_info* bay) } } +#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay(struct device_node *which_bay, int what) { int i; @@ -432,7 +433,6 @@ int check_media_bay(struct device_node *which_bay, int what) } EXPORT_SYMBOL(check_media_bay); -#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay_by_base(unsigned long base, int what) { int i; diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h index df111c3..b2efb33 100644 --- a/include/asm-powerpc/mediabay.h +++ b/include/asm-powerpc/mediabay.h @@ -17,8 +17,6 @@ #define MB_POWER 6 /* media bay contains a Power device (???) */ #define MB_NO 7 /* media bay contains nothing */ -int check_media_bay(struct device_node *which_bay, int what); - /* Number of bays in the machine or 0 */ extern int media_bay_count; @@ -29,6 +27,16 @@ int check_media_bay_by_base(unsigned long base, int what); /* called by IDE PMAC host driver to register IDE controller for media bay */ int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, int irq, ide_hwif_t *hwif); + +int check_media_bay(struct device_node *which_bay, int what); + +#else + +static inline int check_media_bay(struct device_node *which_bay, int what) +{ + return -ENODEV; +} + #endif #endif /* __KERNEL__ */ -- cgit v0.10.2 From 143580ecfb7999147e546cc3814023e233e95fa5 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 13 Jun 2008 07:19:06 +1000 Subject: [POWERPC] Fix bootwrapper builds with newer gcc versions GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the bootwrapper as we'd need to link with libgcc to get the implementation of the register save/restores. To workaround this issue, we just stole the save/restore code from gcc and simplified it down for our needs (integer only). Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index d53b84e..1cee2f9 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -51,7 +51,7 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c -src-wlib := string.S crt0.S stdio.c main.c \ +src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ diff --git a/arch/powerpc/boot/crtsavres.S b/arch/powerpc/boot/crtsavres.S new file mode 100644 index 0000000..f3d9b35 --- /dev/null +++ b/arch/powerpc/boot/crtsavres.S @@ -0,0 +1,233 @@ +/* + * Special support for eabi and SVR4 + * + * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * Written By Michael Meissner + * + * Based on gcc/config/rs6000/crtsavres.asm from gcc + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * In addition to the permissions in the GNU General Public License, the + * Free Software Foundation gives you unlimited permission to link the + * compiled version of this file with other programs, and to distribute + * those programs without any restriction coming from the use of this + * file. (The General Public License restrictions do apply in other + * respects; for example, they cover modification of the file, and + * distribution when not linked into another program.) + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + * As a special exception, if you link this library with files + * compiled with GCC to produce an executable, this does not cause + * the resulting executable to be covered by the GNU General Public License. + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + */ + + .file "crtsavres.S" + .section ".text" + +/* On PowerPC64 Linux, these functions are provided by the linker. */ +#ifndef __powerpc64__ + +#define _GLOBAL(name) \ + .type name,@function; \ + .globl name; \ +name: + +/* Routines for saving integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer save area. */ + +_GLOBAL(_savegpr_14) +_GLOBAL(_save32gpr_14) + stw 14,-72(11) /* save gp registers */ +_GLOBAL(_savegpr_15) +_GLOBAL(_save32gpr_15) + stw 15,-68(11) +_GLOBAL(_savegpr_16) +_GLOBAL(_save32gpr_16) + stw 16,-64(11) +_GLOBAL(_savegpr_17) +_GLOBAL(_save32gpr_17) + stw 17,-60(11) +_GLOBAL(_savegpr_18) +_GLOBAL(_save32gpr_18) + stw 18,-56(11) +_GLOBAL(_savegpr_19) +_GLOBAL(_save32gpr_19) + stw 19,-52(11) +_GLOBAL(_savegpr_20) +_GLOBAL(_save32gpr_20) + stw 20,-48(11) +_GLOBAL(_savegpr_21) +_GLOBAL(_save32gpr_21) + stw 21,-44(11) +_GLOBAL(_savegpr_22) +_GLOBAL(_save32gpr_22) + stw 22,-40(11) +_GLOBAL(_savegpr_23) +_GLOBAL(_save32gpr_23) + stw 23,-36(11) +_GLOBAL(_savegpr_24) +_GLOBAL(_save32gpr_24) + stw 24,-32(11) +_GLOBAL(_savegpr_25) +_GLOBAL(_save32gpr_25) + stw 25,-28(11) +_GLOBAL(_savegpr_26) +_GLOBAL(_save32gpr_26) + stw 26,-24(11) +_GLOBAL(_savegpr_27) +_GLOBAL(_save32gpr_27) + stw 27,-20(11) +_GLOBAL(_savegpr_28) +_GLOBAL(_save32gpr_28) + stw 28,-16(11) +_GLOBAL(_savegpr_29) +_GLOBAL(_save32gpr_29) + stw 29,-12(11) +_GLOBAL(_savegpr_30) +_GLOBAL(_save32gpr_30) + stw 30,-8(11) +_GLOBAL(_savegpr_31) +_GLOBAL(_save32gpr_31) + stw 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14) +_GLOBAL(_rest32gpr_14) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15) +_GLOBAL(_rest32gpr_15) + lwz 15,-68(11) +_GLOBAL(_restgpr_16) +_GLOBAL(_rest32gpr_16) + lwz 16,-64(11) +_GLOBAL(_restgpr_17) +_GLOBAL(_rest32gpr_17) + lwz 17,-60(11) +_GLOBAL(_restgpr_18) +_GLOBAL(_rest32gpr_18) + lwz 18,-56(11) +_GLOBAL(_restgpr_19) +_GLOBAL(_rest32gpr_19) + lwz 19,-52(11) +_GLOBAL(_restgpr_20) +_GLOBAL(_rest32gpr_20) + lwz 20,-48(11) +_GLOBAL(_restgpr_21) +_GLOBAL(_rest32gpr_21) + lwz 21,-44(11) +_GLOBAL(_restgpr_22) +_GLOBAL(_rest32gpr_22) + lwz 22,-40(11) +_GLOBAL(_restgpr_23) +_GLOBAL(_rest32gpr_23) + lwz 23,-36(11) +_GLOBAL(_restgpr_24) +_GLOBAL(_rest32gpr_24) + lwz 24,-32(11) +_GLOBAL(_restgpr_25) +_GLOBAL(_rest32gpr_25) + lwz 25,-28(11) +_GLOBAL(_restgpr_26) +_GLOBAL(_rest32gpr_26) + lwz 26,-24(11) +_GLOBAL(_restgpr_27) +_GLOBAL(_rest32gpr_27) + lwz 27,-20(11) +_GLOBAL(_restgpr_28) +_GLOBAL(_rest32gpr_28) + lwz 28,-16(11) +_GLOBAL(_restgpr_29) +_GLOBAL(_rest32gpr_29) + lwz 29,-12(11) +_GLOBAL(_restgpr_30) +_GLOBAL(_rest32gpr_30) + lwz 30,-8(11) +_GLOBAL(_restgpr_31) +_GLOBAL(_rest32gpr_31) + lwz 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14_x) +_GLOBAL(_rest32gpr_14_x) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15_x) +_GLOBAL(_rest32gpr_15_x) + lwz 15,-68(11) +_GLOBAL(_restgpr_16_x) +_GLOBAL(_rest32gpr_16_x) + lwz 16,-64(11) +_GLOBAL(_restgpr_17_x) +_GLOBAL(_rest32gpr_17_x) + lwz 17,-60(11) +_GLOBAL(_restgpr_18_x) +_GLOBAL(_rest32gpr_18_x) + lwz 18,-56(11) +_GLOBAL(_restgpr_19_x) +_GLOBAL(_rest32gpr_19_x) + lwz 19,-52(11) +_GLOBAL(_restgpr_20_x) +_GLOBAL(_rest32gpr_20_x) + lwz 20,-48(11) +_GLOBAL(_restgpr_21_x) +_GLOBAL(_rest32gpr_21_x) + lwz 21,-44(11) +_GLOBAL(_restgpr_22_x) +_GLOBAL(_rest32gpr_22_x) + lwz 22,-40(11) +_GLOBAL(_restgpr_23_x) +_GLOBAL(_rest32gpr_23_x) + lwz 23,-36(11) +_GLOBAL(_restgpr_24_x) +_GLOBAL(_rest32gpr_24_x) + lwz 24,-32(11) +_GLOBAL(_restgpr_25_x) +_GLOBAL(_rest32gpr_25_x) + lwz 25,-28(11) +_GLOBAL(_restgpr_26_x) +_GLOBAL(_rest32gpr_26_x) + lwz 26,-24(11) +_GLOBAL(_restgpr_27_x) +_GLOBAL(_rest32gpr_27_x) + lwz 27,-20(11) +_GLOBAL(_restgpr_28_x) +_GLOBAL(_rest32gpr_28_x) + lwz 28,-16(11) +_GLOBAL(_restgpr_29_x) +_GLOBAL(_rest32gpr_29_x) + lwz 29,-12(11) +_GLOBAL(_restgpr_30_x) +_GLOBAL(_rest32gpr_30_x) + lwz 30,-8(11) +_GLOBAL(_restgpr_31_x) +_GLOBAL(_rest32gpr_31_x) + lwz 0,4(11) + lwz 31,-4(11) + mtlr 0 + mr 1,11 + blr +#endif -- cgit v0.10.2 From da3de6df33f5f42ff9dc40093fbc884f524c9a49 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 13 Jun 2008 07:20:58 +1000 Subject: [POWERPC] Fix -Os kernel builds with newer gcc versions GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the kernel if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE. To fix this we add the use the save/restore code from gcc and simplified it down for our needs (integer only). Additionally, we have to link this code into each module. The other solution was to add EXPORT_SYMBOL() which meant going through the trampoline which seemed nonsensical for these out-of-line routines. Finally, we add some checks to prom_init_check.sh to ignore the out-of-line save/restore functions. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 86096cc..b7d4c4c 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -96,6 +96,8 @@ endif else KBUILD_CFLAGS += $(call cc-option,-mtune=power4) endif +else +LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o endif ifeq ($(CONFIG_TUNE_CELL),y) diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 31729a9..2c7e8e8 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -48,6 +48,20 @@ do fi done + # ignore register save/restore funcitons + if [ "${UNDEF:0:9}" = "_restgpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:9}" = "_savegpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then + OK=1 + fi + if [ $OK -eq 0 ]; then ERROR=1 echo "Error: External symbol '$UNDEF' referenced" \ diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index c71d37d..e522b06 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -9,7 +9,7 @@ endif ifeq ($(CONFIG_PPC_MERGE),y) obj-y := string.o alloc.o \ checksum_$(CONFIG_WORD_SIZE).o -obj-$(CONFIG_PPC32) += div64.o copy_32.o +obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o obj-$(CONFIG_HAS_IOMEM) += devres.o endif diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S new file mode 100644 index 0000000..70a9cd8 --- /dev/null +++ b/arch/powerpc/lib/crtsavres.S @@ -0,0 +1,229 @@ +/* + * Special support for eabi and SVR4 + * + * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * Written By Michael Meissner + * + * Based on gcc/config/rs6000/crtsavres.asm from gcc + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * In addition to the permissions in the GNU General Public License, the + * Free Software Foundation gives you unlimited permission to link the + * compiled version of this file with other programs, and to distribute + * those programs without any restriction coming from the use of this + * file. (The General Public License restrictions do apply in other + * respects; for example, they cover modification of the file, and + * distribution when not linked into another program.) + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + * As a special exception, if you link this library with files + * compiled with GCC to produce an executable, this does not cause + * the resulting executable to be covered by the GNU General Public License. + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + */ + +#include + + .file "crtsavres.S" + .section ".text" + +#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE + +/* Routines for saving integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer save area. */ + +_GLOBAL(_savegpr_14) +_GLOBAL(_save32gpr_14) + stw 14,-72(11) /* save gp registers */ +_GLOBAL(_savegpr_15) +_GLOBAL(_save32gpr_15) + stw 15,-68(11) +_GLOBAL(_savegpr_16) +_GLOBAL(_save32gpr_16) + stw 16,-64(11) +_GLOBAL(_savegpr_17) +_GLOBAL(_save32gpr_17) + stw 17,-60(11) +_GLOBAL(_savegpr_18) +_GLOBAL(_save32gpr_18) + stw 18,-56(11) +_GLOBAL(_savegpr_19) +_GLOBAL(_save32gpr_19) + stw 19,-52(11) +_GLOBAL(_savegpr_20) +_GLOBAL(_save32gpr_20) + stw 20,-48(11) +_GLOBAL(_savegpr_21) +_GLOBAL(_save32gpr_21) + stw 21,-44(11) +_GLOBAL(_savegpr_22) +_GLOBAL(_save32gpr_22) + stw 22,-40(11) +_GLOBAL(_savegpr_23) +_GLOBAL(_save32gpr_23) + stw 23,-36(11) +_GLOBAL(_savegpr_24) +_GLOBAL(_save32gpr_24) + stw 24,-32(11) +_GLOBAL(_savegpr_25) +_GLOBAL(_save32gpr_25) + stw 25,-28(11) +_GLOBAL(_savegpr_26) +_GLOBAL(_save32gpr_26) + stw 26,-24(11) +_GLOBAL(_savegpr_27) +_GLOBAL(_save32gpr_27) + stw 27,-20(11) +_GLOBAL(_savegpr_28) +_GLOBAL(_save32gpr_28) + stw 28,-16(11) +_GLOBAL(_savegpr_29) +_GLOBAL(_save32gpr_29) + stw 29,-12(11) +_GLOBAL(_savegpr_30) +_GLOBAL(_save32gpr_30) + stw 30,-8(11) +_GLOBAL(_savegpr_31) +_GLOBAL(_save32gpr_31) + stw 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14) +_GLOBAL(_rest32gpr_14) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15) +_GLOBAL(_rest32gpr_15) + lwz 15,-68(11) +_GLOBAL(_restgpr_16) +_GLOBAL(_rest32gpr_16) + lwz 16,-64(11) +_GLOBAL(_restgpr_17) +_GLOBAL(_rest32gpr_17) + lwz 17,-60(11) +_GLOBAL(_restgpr_18) +_GLOBAL(_rest32gpr_18) + lwz 18,-56(11) +_GLOBAL(_restgpr_19) +_GLOBAL(_rest32gpr_19) + lwz 19,-52(11) +_GLOBAL(_restgpr_20) +_GLOBAL(_rest32gpr_20) + lwz 20,-48(11) +_GLOBAL(_restgpr_21) +_GLOBAL(_rest32gpr_21) + lwz 21,-44(11) +_GLOBAL(_restgpr_22) +_GLOBAL(_rest32gpr_22) + lwz 22,-40(11) +_GLOBAL(_restgpr_23) +_GLOBAL(_rest32gpr_23) + lwz 23,-36(11) +_GLOBAL(_restgpr_24) +_GLOBAL(_rest32gpr_24) + lwz 24,-32(11) +_GLOBAL(_restgpr_25) +_GLOBAL(_rest32gpr_25) + lwz 25,-28(11) +_GLOBAL(_restgpr_26) +_GLOBAL(_rest32gpr_26) + lwz 26,-24(11) +_GLOBAL(_restgpr_27) +_GLOBAL(_rest32gpr_27) + lwz 27,-20(11) +_GLOBAL(_restgpr_28) +_GLOBAL(_rest32gpr_28) + lwz 28,-16(11) +_GLOBAL(_restgpr_29) +_GLOBAL(_rest32gpr_29) + lwz 29,-12(11) +_GLOBAL(_restgpr_30) +_GLOBAL(_rest32gpr_30) + lwz 30,-8(11) +_GLOBAL(_restgpr_31) +_GLOBAL(_rest32gpr_31) + lwz 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14_x) +_GLOBAL(_rest32gpr_14_x) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15_x) +_GLOBAL(_rest32gpr_15_x) + lwz 15,-68(11) +_GLOBAL(_restgpr_16_x) +_GLOBAL(_rest32gpr_16_x) + lwz 16,-64(11) +_GLOBAL(_restgpr_17_x) +_GLOBAL(_rest32gpr_17_x) + lwz 17,-60(11) +_GLOBAL(_restgpr_18_x) +_GLOBAL(_rest32gpr_18_x) + lwz 18,-56(11) +_GLOBAL(_restgpr_19_x) +_GLOBAL(_rest32gpr_19_x) + lwz 19,-52(11) +_GLOBAL(_restgpr_20_x) +_GLOBAL(_rest32gpr_20_x) + lwz 20,-48(11) +_GLOBAL(_restgpr_21_x) +_GLOBAL(_rest32gpr_21_x) + lwz 21,-44(11) +_GLOBAL(_restgpr_22_x) +_GLOBAL(_rest32gpr_22_x) + lwz 22,-40(11) +_GLOBAL(_restgpr_23_x) +_GLOBAL(_rest32gpr_23_x) + lwz 23,-36(11) +_GLOBAL(_restgpr_24_x) +_GLOBAL(_rest32gpr_24_x) + lwz 24,-32(11) +_GLOBAL(_restgpr_25_x) +_GLOBAL(_rest32gpr_25_x) + lwz 25,-28(11) +_GLOBAL(_restgpr_26_x) +_GLOBAL(_rest32gpr_26_x) + lwz 26,-24(11) +_GLOBAL(_restgpr_27_x) +_GLOBAL(_rest32gpr_27_x) + lwz 27,-20(11) +_GLOBAL(_restgpr_28_x) +_GLOBAL(_rest32gpr_28_x) + lwz 28,-16(11) +_GLOBAL(_restgpr_29_x) +_GLOBAL(_rest32gpr_29_x) + lwz 29,-12(11) +_GLOBAL(_restgpr_30_x) +_GLOBAL(_rest32gpr_30_x) + lwz 30,-8(11) +_GLOBAL(_restgpr_31_x) +_GLOBAL(_rest32gpr_31_x) + lwz 0,4(11) + lwz 31,-4(11) + mtlr 0 + mr 1,11 + blr +#endif -- cgit v0.10.2 From 4a96db3c780f30432653f99cbff193ba3e474e0b Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 16 Jun 2008 10:50:13 +1000 Subject: [POWERPC] Remove ppc32's export of console_drivers There are no in-tree uses of the export any more and in linux-next there is a change that exports it globally which causes warnings: WARNING: vmlinux: 'console_drivers' exported twice. Previous export was in vmlinux and in one case (mpc85xx_defconfig) a build error: kernel/built-in.o: In function `__crc_console_drivers': (*ABS*+0x1eb0e6f5): multiple definition of `__crc_console_drivers' So remove the export now. Also, there is no longer any need to include linux/console.h. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index cf6b5a7..d3ac631 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -160,7 +159,6 @@ EXPORT_SYMBOL(screen_info); EXPORT_SYMBOL(timer_interrupt); EXPORT_SYMBOL(irq_desc); EXPORT_SYMBOL(tb_ticks_per_jiffy); -EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(cacheable_memcpy); #endif -- cgit v0.10.2 From 313348db0bff8911b1219e6338342d0527072741 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 16 Jun 2008 21:14:12 +1000 Subject: [POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs This enables CONFIG_ATA_SFF in the defconfigs that are intended to work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since the support for the SATA cell in the K2 chipset is provided by the sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s. Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index db34909..0ccc6e4 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:01:18 2008 +# Linux kernel version: 2.6.26-rc6 +# Mon Jun 16 21:08:31 2008 # CONFIG_PPC64=y @@ -597,7 +597,61 @@ CONFIG_ATA=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -1230,6 +1284,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1345,6 +1400,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 40f84fa..ce250bc 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:03:02 2008 +# Linux kernel version: 2.6.26-rc6 +# Mon Jun 16 21:11:19 2008 # CONFIG_PPC64=y @@ -763,7 +763,63 @@ CONFIG_ATA_NONSTANDARD=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCC is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -1478,6 +1534,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1537,6 +1594,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1597,6 +1655,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1617,6 +1676,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +CONFIG_RTC_DRV_PPC=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set -- cgit v0.10.2 From e4f3ec063421bdbcb93330e72aa3eeedb6a0d85a Mon Sep 17 00:00:00 2001 From: Paul Collins Date: Sat, 14 Jun 2008 14:14:59 +1200 Subject: udf: restore UDFFS_DEBUG to being undefined by default Commit 706047a79725b585cf272fdefc234b31b6545c72, "udf: Fix compilation warnings when UDF debug is on" inadvertently (I assume) enabled debugging messages by default for UDF. This patch disables them again. Signed-off-by: Paul Collins Signed-off-by: Jan Kara diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h index 8fa9c2d..8ec865d 100644 --- a/fs/udf/udfdecl.h +++ b/fs/udf/udfdecl.h @@ -16,7 +16,7 @@ #define UDF_PREALLOCATE #define UDF_DEFAULT_PREALLOC_BLOCKS 8 -#define UDFFS_DEBUG +#undef UDFFS_DEBUG #ifdef UDFFS_DEBUG #define udf_debug(f, a...) \ -- cgit v0.10.2 From 9f9115d880ca550922434aee05ca18796c58eb99 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 16 Jun 2008 14:13:52 +0200 Subject: sound: oxygen: fix NULL pointer dereference when loading snd-oxygen Check that model->control_filter is set before trying to call it. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c index cc0cdda..6facac5 100644 --- a/sound/pci/oxygen/oxygen_mixer.c +++ b/sound/pci/oxygen/oxygen_mixer.c @@ -936,11 +936,13 @@ static int add_controls(struct oxygen *chip, for (i = 0; i < count; ++i) { template = controls[i]; - err = chip->model->control_filter(&template); - if (err < 0) - return err; - if (err == 1) - continue; + if (chip->model->control_filter) { + err = chip->model->control_filter(&template); + if (err < 0) + return err; + if (err == 1) + continue; + } if (!strcmp(template.name, "Master Playback Volume") && chip->model->dac_tlv) { template.tlv.p = chip->model->dac_tlv; -- cgit v0.10.2 From 497d2adcbf50bccec6c56620d61d77429d23993a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 6 Jun 2008 14:23:06 +0100 Subject: [MIPS] Export empty_zero_page for sake of the ext4 module. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index ecd562d..137c14b 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -71,6 +71,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); * don't have to care about aliases on other CPUs. */ unsigned long empty_zero_page, zero_page_mask; +EXPORT_SYMBOL_GPL(empty_zero_page); /* * Not static inline because used by IP27 special magic initialization code -- cgit v0.10.2 From 6b7d0b2fb6da3f6182f2bd162bf02ed4aed1813f Mon Sep 17 00:00:00 2001 From: bruno randolf Date: Fri, 6 Jun 2008 16:42:03 +0200 Subject: [MIPS] Alchemy: Add au1500 reserved interrupt In the conversion done in the commits 95c4eb3ef4484ca85da5c98780d358cffd546b90 9d360ab4a7568a8d177280f651a8a772ae52b9b9 [MIPS] Alchemy: Renumber interrupts so irq_cpu can work. one reserved interrupt on au1500 was missed. this broke the au1000 ethernet driver. Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 1b5064d..0d302ba 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -615,6 +615,7 @@ enum soc_au1500_ints { AU1000_RTC_MATCH1_INT, AU1000_RTC_MATCH2_INT, AU1500_PCI_ERR_INT, + AU1500_RESERVED_INT, AU1000_USB_DEV_REQ_INT, AU1000_USB_DEV_SUS_INT, AU1000_USB_HOST_INT, -- cgit v0.10.2 From d0f9cbd4b29c3d208d6b31519cbb940d98d61e7d Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 9 Jun 2008 17:20:03 +0100 Subject: [MIPS] SB1250: Initialize io_map_base Correctly initialize io_map_base for the SB1250 PCI controller as required for proper iomap support. Based on a proposal from Daniel Jacobowitz. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 42e4d2c..2a09ad9 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -207,6 +207,7 @@ struct pci_controller sb1250_controller = { static int __init sb1250_pcibios_init(void) { + void __iomem *io_map_base; uint32_t cmdreg; uint64_t reg; extern int pci_probe_only; @@ -253,12 +254,13 @@ static int __init sb1250_pcibios_init(void) * works correctly with most of Linux's drivers. * XXX ehs: Should this happen in PCI Device mode? */ - - set_io_port_base((unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536)); isa_slot_offset = (unsigned long) ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); + io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); + sb1250_controller.io_map_base = io_map_base; + set_io_port_base((unsigned long)io_map_base); + #ifdef CONFIG_SIBYTE_HAS_LDT /* * Also check the LDT bridge's enable, just in case we didn't -- cgit v0.10.2 From 0e27d7931157fa89cc9afb7735095a0d81ce8fec Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:16 +0200 Subject: [MIPS] Better load address for big endian SNI RM Use better load address for big endian kernels to avoid clashes with PROM / SASH. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 69648d0..1ec8e35 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # core-$(CONFIG_SNI_RM) += arch/mips/sni/ cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm +ifdef CONFIG_CPU_LITTLE_ENDIAN load-$(CONFIG_SNI_RM) += 0xffffffff80600000 +else +load-$(CONFIG_SNI_RM) += 0xffffffff80030000 +endif all-$(CONFIG_SNI_RM) := vmlinux.ecoff # -- cgit v0.10.2 From 330117ff2723566e8eb7ad43223081b557f1540e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:20 +0200 Subject: [MIPS] Add RM200 with R5000 CPU to known ARC machines RM200 with R5ks have a little bit different arcname. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index 28dfd2e..2306698 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -67,6 +67,11 @@ static struct smatch mach_table[] = { .liname = "SNI RM200_PCI", .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, + }, { + .arcname = "RM200PCI-R5K", + .liname = "SNI RM200_PCI-R5K", + .type = MACH_SNI_RM200_PCI, + .flags = PROM_FLAG_DONT_FREE_TEMP, } }; -- cgit v0.10.2 From 89052bd7b393434f7c573ce6a3b88c5f143586d2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 12 Jun 2008 17:26:02 +0100 Subject: [MIPS] Fix build for PNX platforms. Build error was caused by commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 643c8bc..c41ea22 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1226,6 +1226,28 @@ void au1x00_fixup_config_od(void) } } +/* CP0 hazard avoidance. */ +#define NXP_BARRIER() \ + __asm__ __volatile__( \ + ".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +static void nxp_pr4450_fixup_config(void) +{ + unsigned long config0; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7 << 25) | (7 << 28)); + config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) | + ((_page_cachable_default >> _CACHE_SHIFT) << 25) | + ((_page_cachable_default >> _CACHE_SHIFT) << 28)); + write_c0_config(config0); + NXP_BARRIER(); +} + static int __cpuinitdata cca = -1; static int __init cca_setup(char *str) @@ -1271,6 +1293,10 @@ static void __cpuinit coherency_setup(void) case CPU_AU1500: /* rev. AB */ au1x00_fixup_config_od(); break; + + case PRID_IMP_PR4450: + nxp_pr4450_fixup_config(); + break; } } diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c index f92826e..57dd903 100644 --- a/arch/mips/nxp/pnx8550/jbs/board_setup.c +++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c @@ -47,16 +47,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); - BARRIER; + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c index 1282c27..af2a55e 100644 --- a/arch/mips/nxp/pnx8550/stb810/board_setup.c +++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c @@ -33,15 +33,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h index 60e2f93..51b34a4 100644 --- a/include/asm-mips/pgtable-bits.h +++ b/include/asm-mips/pgtable-bits.h @@ -134,6 +134,4 @@ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) -#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT) - #endif /* _ASM_PGTABLE_BITS_H */ -- cgit v0.10.2 From 7bd0fea2c590d94995c2ee0b32e786c1c62621fa Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 30 May 2008 13:07:21 +0900 Subject: [MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index cab81f4..1edf0cb 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -460,7 +460,7 @@ void __cpuinit build_copy_page(void) build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) * cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); -- cgit v0.10.2 From 63a4881a7dd45038f46caa7c3c08b88b01cf9473 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:14:10 +0100 Subject: [MIPS] Sibyte: Build RTC support as an object Build the SWARM platform library is as an object rather than an archive so that files which only contain symbols used by initcalls and do not provide any symbols that would pull them from an archive still work. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1ec8e35..ad36c94 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ # Sibyte SWARM board # Sibyte BCM91x80 (BigSur) board # -libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 2d62603..1775755 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,3 @@ -lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o +obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o -lib-$(CONFIG_KGDB) += dbg_io.o +obj-$(CONFIG_KGDB) += dbg_io.o -- cgit v0.10.2 From 461a082f870c7fc6a0a245e2f93c9f0e3afbeddd Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:10:00 +0100 Subject: [MIPS] Bring the SWARM defconfig up to date The SWARM defconfig file has not been regenerated for over a year now. Here is a patch to bring the file up to date. Additionally some important and sometimes confusing changes happened meanwhile. Here is the list of notable corresponding updates to the configuration: 1. CPU_SB1_PASS_2_2 is now selected rather than CPU_SB1_PASS_1. The latter requires a non-standard -msb1-pass1-workarounds option to be supported by GCC and I am told is quite rare anyway. [Ralf: Afaik -msb1-pass1-workarounds is available only in Monta Vista's special Sibyte gcc 3.0 variant and gcc 3.0 is too old to build a modern kernel anyway.] 2. PHYLIB and BROADCOM_PHY are both built in and NETDEV_1000 enabled as required by SB1250_MAC. 3. USB and USB_OHCI_HCD are enabled as there is an OHCI chip onboard. 4. TMPFS is enabled, because I use it. ;-) Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 117470b..4b87998 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,67 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:40 2007 +# Linux kernel version: 2.6.25 +# Sat May 3 00:38:11 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -CONFIG_SIBYTE_SWARM=y -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +CONFIG_SIBYTE_SWARM=y +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_SIBYTE_SB1250=y CONFIG_SIBYTE_SB1xxx_SOC=y -CONFIG_CPU_SB1_PASS_1=y +# CONFIG_CPU_SB1_PASS_1 is not set # CONFIG_CPU_SB1_PASS_2_1250 is not set -# CONFIG_CPU_SB1_PASS_2_2 is not set +CONFIG_CPU_SB1_PASS_2_2=y # CONFIG_CPU_SB1_PASS_4 is not set # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set CONFIG_SIBYTE_HAS_LDT=y +CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y # CONFIG_SIMULATION is not set # CONFIG_SB1_CEX_ALWAYS_FATAL is not set # CONFIG_SB1_CERR_STALL is not set @@ -69,20 +60,32 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set # CONFIG_SIBYTE_TBPROF is not set +CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_CEVT_SB1250=y +CONFIG_CSRC_SB1250=y +CONFIG_CFE=y CONFIG_DMA_COHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -90,6 +93,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -130,8 +134,7 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_SB1_PASS_1_WORKAROUNDS=y +CONFIG_SB1_PASS_2_WORKAROUNDS=y CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -140,6 +143,7 @@ CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -147,13 +151,19 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_2=y CONFIG_NR_CPUS=2 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -166,38 +176,49 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set CONFIG_CPUSETS=y -CONFIG_SYSFS_DEPRECATED=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_PROC_PID_CPUSET is not set CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -209,20 +230,29 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -230,12 +260,10 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -249,22 +277,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_ZONE_DMA32=y # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -272,7 +297,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -286,7 +310,6 @@ CONFIG_BINFMT_ELF32=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -296,7 +319,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -304,6 +326,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -326,6 +349,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -333,24 +357,15 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -363,26 +378,52 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_RFKILL=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -391,34 +432,15 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -427,49 +449,77 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=9220 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDE_SWARM=y -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -477,89 +527,68 @@ CONFIG_BLK_DEV_IDE_SWARM=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -568,53 +597,70 @@ CONFIG_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH5K is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -637,24 +683,8 @@ CONFIG_SERIO_RAW=m # Character devices # # CONFIG_VT is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=m -# CONFIG_ISI is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_SYNCLINK_GT is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_SERIAL_SB1250_DUART=y -CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -664,37 +694,22 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -702,109 +717,139 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# USB Gadget Support +# Miscellaneous USB options # -# CONFIG_USB_GADGET is not set +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set # -# MMC/SD Card support +# USB Host Controller Drivers # -# CONFIG_MMC is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # -# LED devices +# USB Device Class drivers # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # -# LED drivers +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# LED Triggers +# may also be needed; see USB_STORAGE Help for more information # +# CONFIG_USB_LIBUSUAL is not set # -# InfiniBand support +# USB Imaging devices # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB port drivers # +# CONFIG_USB_SERIAL is not set # -# Real Time Clock +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -823,15 +868,14 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -853,9 +897,9 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -871,14 +915,13 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -890,6 +933,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -897,45 +941,29 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set @@ -946,13 +974,12 @@ CONFIG_SYS_SUPPORTS_KGDB=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -970,6 +997,11 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -983,15 +1015,16 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines @@ -999,10 +1032,15 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From a9ad02bdbb0193203a477bbd0e833adf9fb29ac4 Mon Sep 17 00:00:00 2001 From: Zenon Fortuna Date: Fri, 16 May 2008 17:29:48 -0700 Subject: [MIPS] Export smp_call_function and smp_call_function_single. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 63370cd..cdf87a9 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -216,6 +216,7 @@ int smp_call_function(void (*func) (void *info), void *info, int retry, { return smp_call_function_mask(cpu_online_map, func, info, retry, wait); } +EXPORT_SYMBOL(smp_call_function); void smp_call_function_interrupt(void) { @@ -271,6 +272,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, put_cpu(); return 0; } +EXPORT_SYMBOL(smp_call_function_single); static void stop_this_cpu(void *dummy) { -- cgit v0.10.2 From d6c3048cad3c9eb312c070e11fdbea56498255ed Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 16 May 2008 17:29:54 -0700 Subject: [MIPS] vpe_id is required for VSMP and SMTC builds Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h index 0c5a358..2de73db 100644 --- a/include/asm-mips/cpu-info.h +++ b/include/asm-mips/cpu-info.h @@ -56,7 +56,7 @@ struct cpuinfo_mips { struct cache_desc tcache; /* Tertiary/split secondary cache */ int srsets; /* Shadow register sets */ int core; /* physical core number */ -#if defined(CONFIG_MIPS_MT_SMTC) +#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) /* * In the MIPS MT "SMTC" model, each TC is considered * to be a "CPU" for the purposes of scheduling, but @@ -64,7 +64,7 @@ struct cpuinfo_mips { * to all TCs within the same VPE. */ int vpe_id; /* Virtual Processor number */ -#endif /* CONFIG_MIPS_MT */ +#endif #ifdef CONFIG_MIPS_MT_SMTC int tc_id; /* Thread Context number */ #endif -- cgit v0.10.2 From 0c3bd83b0974238a5808d342663c6407512564d0 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sat, 14 Jun 2008 02:32:42 +0100 Subject: [MIPS] Lasat: bring back from the dead After the common MIPS CPU interrupt controller (for irq0-7) was introduced the Lasat boards didn't get their interrupts right, so nothing worked. The old routines need to be offset by the new 8 hardware interrupts common to all MIPS CPU's. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index cfeab66..a56c150 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift; void disable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift; } void enable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift; } diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h index bafe68b..1c37d70 100644 --- a/include/asm-mips/lasat/serial.h +++ b/include/asm-mips/lasat/serial.h @@ -4,10 +4,10 @@ #define LASAT_BASE_BAUD_100 (7372800 / 16) #define LASAT_UART_REGS_BASE_100 0x1c8b0000 #define LASAT_UART_REGS_SHIFT_100 2 -#define LASATINT_UART_100 8 +#define LASATINT_UART_100 16 /* * LASAT 200 boards serial configuration */ #define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) #define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) #define LASAT_UART_REGS_SHIFT_200 3 -#define LASATINT_UART_200 13 +#define LASATINT_UART_200 21 -- cgit v0.10.2 From c9c5023d83df5dc7d58830a63fd0e082120f00e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 14 Jun 2008 22:22:08 +0100 Subject: [MIPS] Fix buggy use of kmap_coherent. Assuming the call of kmap_coherent in local_r4k_flush_cache_page doesn't need fixing this was skipped in fcae549295bcae801ac48fc1c2030ab8cc487020. Turns out it needed the same change after all. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index c41ea22..2709675 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -446,6 +446,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct page *page = pfn_to_page(fcp_args->pfn); int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; + int map_coherent = 0; pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; @@ -479,7 +480,9 @@ static inline void local_r4k_flush_cache_page(void *args) * Use kmap_coherent or kmap_atomic to do flushes for * another ASID than the current one. */ - if (cpu_has_dc_aliases) + map_coherent = (cpu_has_dc_aliases && + page_mapped(page) && !Page_dcache_dirty(page)); + if (map_coherent) vaddr = kmap_coherent(page, addr); else vaddr = kmap_atomic(page, KM_USER0); @@ -502,7 +505,7 @@ static inline void local_r4k_flush_cache_page(void *args) } if (vaddr) { - if (cpu_has_dc_aliases) + if (map_coherent) kunmap_coherent(); else kunmap_atomic(vaddr, KM_USER0); -- cgit v0.10.2 From 1f34f2e4262bae8a1aa6d8fd6306b07074d33718 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sun, 15 Jun 2008 02:17:11 +0100 Subject: [MIPS] Lasat: sysctl fixup LASAT's sysctl interface was broken, it failed a check during boot because a single entry had a sysctl number and the rest were unnumbered. When I fixed it I noticed that the whole sysctl file needed a spring clean, it was using mutexes where it wasn't needed (it's only needed to protect during writes to the EEPROM), so I moved that stuff out and generally cleaned the whole thing up. So now, LASAT's sysctl/proc interface is working again. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c index ec2f658..31e328b 100644 --- a/arch/mips/lasat/lasat_board.c +++ b/arch/mips/lasat/lasat_board.c @@ -23,18 +23,19 @@ #include #include #include +#include #include #include #include "at93c.h" /* New model description table */ #include "lasat_models.h" +static DEFINE_MUTEX(lasat_eeprom_mutex); + #define EEPROM_CRC(data, len) (~crc32(~0, data, len)) struct lasat_info lasat_board_info; -void update_bcastaddr(void); - int EEPROMRead(unsigned int pos, unsigned char *data, int len) { int i; @@ -258,10 +259,6 @@ int lasat_init_board_info(void) sprintf(lasat_board_info.li_typestr, "%d", 10 * c); } -#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL) - update_bcastaddr(); -#endif - return 0; } @@ -269,6 +266,8 @@ void lasat_write_eeprom_info(void) { unsigned long crc; + mutex_lock(&lasat_eeprom_mutex); + /* Generate the CRC */ crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), sizeof(struct lasat_eeprom_struct) - 4); @@ -277,4 +276,6 @@ void lasat_write_eeprom_info(void) /* Write the EEPROM info */ EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, sizeof(struct lasat_eeprom_struct)); + + mutex_unlock(&lasat_eeprom_mutex); } diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 389336c..866881e 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -29,15 +29,13 @@ #include #include #include -#include #include #include -#include "sysctl.h" +#ifdef CONFIG_DS1603 #include "ds1603.h" - -static DEFINE_MUTEX(lasat_info_mutex); +#endif /* Strategy function to write EEPROM after changing string entry */ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, @@ -46,18 +44,15 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_string(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } @@ -67,14 +62,11 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dostring(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } @@ -85,28 +77,24 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } +#ifdef CONFIG_DS1603 static int rtctmp; -#ifdef CONFIG_DS1603 /* proc function to read/write RealTime Clock */ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); if (!write) { rtctmp = read_persistent_clock(); /* check for time < 0 and set to 0 */ @@ -114,12 +102,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, rtctmp = 0; } r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r) return r; - } - rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); + + if (write) + rtc_mips_set_mmss(rtctmp); return 0; } @@ -132,17 +119,14 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } #ifdef CONFIG_DS1603 @@ -153,50 +137,27 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); rtctmp = read_persistent_clock(); if (rtctmp < 0) rtctmp = 0; r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } if (newval && newlen) rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); - return 1; + return r; } #endif #ifdef CONFIG_INET -static char lasat_bcastaddr[16]; - -void update_bcastaddr(void) -{ - unsigned int ip; - - ip = (lasat_board_info.li_eeprom_info.ipaddr & - lasat_board_info.li_eeprom_info.netmask) | - ~lasat_board_info.li_eeprom_info.netmask; - - sprintf(lasat_bcastaddr, "%d.%d.%d.%d", - (ip) & 0xff, - (ip >> 8) & 0xff, - (ip >> 16) & 0xff, - (ip >> 24) & 0xff); -} - -static char proc_lasat_ipbuf[32]; - -/* Parsing of IP address */ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { unsigned int ip; char *p, c; int len; + char ipbuf[32]; if (!table->data || !table->maxlen || !*lenp || (*ppos && !write)) { @@ -204,117 +165,88 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, return 0; } - mutex_lock(&lasat_info_mutex); if (write) { len = 0; p = buffer; while (len < *lenp) { - if (get_user(c, p++)) { - mutex_unlock(&lasat_info_mutex); + if (get_user(c, p++)) return -EFAULT; - } if (c == 0 || c == '\n') break; len++; } - if (len >= sizeof(proc_lasat_ipbuf)-1) - len = sizeof(proc_lasat_ipbuf) - 1; - if (copy_from_user(proc_lasat_ipbuf, buffer, len)) { - mutex_unlock(&lasat_info_mutex); + if (len >= sizeof(ipbuf)-1) + len = sizeof(ipbuf) - 1; + if (copy_from_user(ipbuf, buffer, len)) return -EFAULT; - } - proc_lasat_ipbuf[len] = 0; + ipbuf[len] = 0; *ppos += *lenp; /* Now see if we can convert it to a valid IP */ - ip = in_aton(proc_lasat_ipbuf); + ip = in_aton(ipbuf); *(unsigned int *)(table->data) = ip; lasat_write_eeprom_info(); } else { ip = *(unsigned int *)(table->data); - sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d", + sprintf(ipbuf, "%d.%d.%d.%d", (ip) & 0xff, (ip >> 8) & 0xff, (ip >> 16) & 0xff, (ip >> 24) & 0xff); - len = strlen(proc_lasat_ipbuf); + len = strlen(ipbuf); if (len > *lenp) len = *lenp; if (len) - if (copy_to_user(buffer, proc_lasat_ipbuf, len)) { - mutex_unlock(&lasat_info_mutex); + if (copy_to_user(buffer, ipbuf, len)) return -EFAULT; - } if (len < *lenp) { - if (put_user('\n', ((char *) buffer) + len)) { - mutex_unlock(&lasat_info_mutex); + if (put_user('\n', ((char *) buffer) + len)) return -EFAULT; - } len++; } *lenp = len; *ppos += len; } - update_bcastaddr(); - mutex_unlock(&lasat_info_mutex); return 0; } -#endif /* defined(CONFIG_INET) */ +#endif -static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, +static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen, void *oldval, size_t *oldlenp, void *newval, size_t newlen) { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } - if (newval && newlen) { - if (name && *name == LASAT_PRID) - lasat_board_info.li_eeprom_info.prid = *(int *)newval; - + lasat_board_info.li_eeprom_info.prid = *(int *)newval; lasat_write_eeprom_info(); lasat_init_board_info(); } - mutex_unlock(&lasat_info_mutex); - return 0; } -int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, +int proc_lasat_prid(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; + if (write) { + lasat_board_info.li_eeprom_info.prid = + lasat_board_info.li_prid; + lasat_write_eeprom_info(); + lasat_init_board_info(); } - if (filp && filp->f_path.dentry) { - if (!strcmp(filp->f_path.dentry->d_name.name, "prid")) - lasat_board_info.li_eeprom_info.prid = - lasat_board_info.li_prid; - if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess")) - lasat_board_info.li_eeprom_info.debugaccess = - lasat_board_info.li_debugaccess; - } - lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 0; } extern int lasat_boot_to_service; -#ifdef CONFIG_SYSCTL - static ctl_table lasat_table[] = { { .ctl_name = CTL_UNNUMBERED, @@ -349,8 +281,8 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_prid, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = &proc_lasat_eeprom_value, - .strategy = &sysctl_lasat_eeprom_value + .proc_handler = &proc_lasat_prid, + .strategy = &sysctl_lasat_prid }, #ifdef CONFIG_INET { @@ -363,7 +295,7 @@ static ctl_table lasat_table[] = { .strategy = &sysctl_lasat_intvec }, { - .ctl_name = LASAT_NETMASK, + .ctl_name = CTL_UNNUMBERED, .procname = "netmask", .data = &lasat_board_info.li_eeprom_info.netmask, .maxlen = sizeof(int), @@ -371,15 +303,6 @@ static ctl_table lasat_table[] = { .proc_handler = &proc_lasat_ip, .strategy = &sysctl_lasat_intvec }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "bcastaddr", - .data = &lasat_bcastaddr, - .maxlen = sizeof(lasat_bcastaddr), - .mode = 0600, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string - }, #endif { .ctl_name = CTL_UNNUMBERED, @@ -417,7 +340,7 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_namestr, .maxlen = sizeof(lasat_board_info.li_namestr), .mode = 0444, - .proc_handler = &proc_dostring, + .proc_handler = &proc_dostring, .strategy = &sysctl_string }, { @@ -448,9 +371,12 @@ static int __init lasat_register_sysctl(void) lasat_table_header = register_sysctl_table(lasat_root_table); + if (!lasat_table_header) { + printk(KERN_ERR "Unable to register LASAT sysctl\n"); + return -ENOMEM; + } return 0; } __initcall(lasat_register_sysctl); -#endif /* CONFIG_SYSCTL */ diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h deleted file mode 100644 index 341b979..0000000 --- a/arch/mips/lasat/sysctl.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * LASAT sysctl values - */ - -#ifndef _LASAT_SYSCTL_H -#define _LASAT_SYSCTL_H - -/* /proc/sys/lasat */ -enum { - LASAT_CPU_HZ = 1, - LASAT_BUS_HZ, - LASAT_MODEL, - LASAT_PRID, - LASAT_IPADDR, - LASAT_NETMASK, - LASAT_BCAST, - LASAT_PASSWORD, - LASAT_SBOOT, - LASAT_RTC, - LASAT_NAMESTR, - LASAT_TYPESTR, -}; - -#endif /* _LASAT_SYSCTL_H */ -- cgit v0.10.2 From 938b2b14172bd098972df2a5157bfabf161c90e5 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 29 May 2008 22:05:07 +0200 Subject: [MIPS] Malta: Fix build errors for 64-bit kernels Fix 64-bit Malta by using CKSEG0ADDR and correct casts. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c index b7633fd..96236bf 100644 --- a/arch/mips/mips-boards/generic/amon.c +++ b/arch/mips/mips-boards/generic/amon.c @@ -28,7 +28,7 @@ int amon_cpu_avail(int cpu) { - struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (cpu < 0 || cpu >= NCPULAUNCH) { pr_debug("avail: cpu%d is out of range\n", cpu); @@ -53,7 +53,7 @@ void amon_cpu_start(int cpu, unsigned long gp, unsigned long a0) { volatile struct cpulaunch *launch = - (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (!amon_cpu_avail(cpu)) return; diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h index 3a492f2..954807d 100644 --- a/include/asm-mips/gic.h +++ b/include/asm-mips/gic.h @@ -24,8 +24,8 @@ #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) -#define REG(base, offs) REG32((unsigned int)(base) + offs##_##OFS) -#define REGP(base, phys) REG32((unsigned int)(base) + (phys)) +#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS) +#define REGP(base, phys) REG32((unsigned long)(base) + (phys)) /* Accessors */ #define GIC_REG(segment, offset) \ -- cgit v0.10.2 From b8157180ccd8bb3752f510c6c434b86394636093 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 16 Jun 2008 00:23:39 +0100 Subject: [MIPS] Malta: Always compile MTD platform device registration code. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 8dc6e2a..db4ad65 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,9 +19,8 @@ # under Linux. # -obj-y := malta_int.o malta_platform.o malta_setup.o +obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o -obj-$(CONFIG_MTD) += malta_mtd.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o -- cgit v0.10.2 From f1304b358a6c952e4cd1f92c8a6f183b1026c103 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:51:08 +0900 Subject: [MIPS] Vr41xx: Initialize PCI io_map_base Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index 33c4f68..d1e049b 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -3,7 +3,7 @@ * * Copyright (C) 2001-2003 MontaVista Software Inc. * Author: Yoichi Yuasa - * Copyright (C) 2004-2005 Yoichi Yuasa + * Copyright (C) 2004-2008 Yoichi Yuasa * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify @@ -300,6 +300,18 @@ static int __init vr41xx_pciu_init(void) ioport_resource.end = IO_PORT_RESOURCE_END; } + if (setup->master_io) { + void __iomem *io_map_base; + struct resource *res = vr41xx_pci_controller.io_resource; + master = setup->master_io; + io_map_base = ioremap(master->bus_base_address, + res->end - res->start + 1); + if (!io_map_base) + return -EBUSY; + + vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base; + } + register_pci_controller(&vr41xx_pci_controller); return 0; -- cgit v0.10.2 From b185194ef0691c8068c7d764aa8f78899d05512a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:54:16 +0900 Subject: [MIPS] TANBAC: Update defconfig These boards need cca setup on CMDLINE. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index af82e1a..8dd3ae3 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Wed Aug 8 16:11:47 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:54:51 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +308,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -285,15 +316,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -306,10 +332,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -317,6 +339,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -339,6 +362,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -360,10 +384,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -375,10 +400,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -394,6 +415,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=m @@ -409,7 +431,8 @@ CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -420,6 +443,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -427,7 +454,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -439,6 +465,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -451,6 +478,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -472,6 +503,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -480,14 +512,12 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -506,7 +536,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -533,7 +562,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -552,52 +583,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_GPIO_TB0219=y -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -616,6 +657,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -624,15 +666,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -665,10 +710,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -694,17 +735,11 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -729,9 +764,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -740,23 +776,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -771,20 +790,16 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -813,7 +828,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -828,24 +842,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -866,47 +877,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index a95385b..2ba240e 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 11:16:55 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:53:54 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -277,6 +307,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -284,15 +315,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -305,10 +331,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -316,6 +338,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -338,6 +361,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -359,10 +383,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -402,18 +427,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -428,6 +448,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -440,6 +461,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -447,7 +472,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -455,6 +479,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -470,6 +495,7 @@ CONFIG_E100=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -478,7 +504,6 @@ CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -486,7 +511,6 @@ CONFIG_USB_RTL8150=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -505,7 +529,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -532,7 +555,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -551,52 +576,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -615,6 +650,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -623,15 +659,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -657,13 +696,16 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -676,10 +718,6 @@ CONFIG_USB_STORAGE=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -705,17 +743,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -740,9 +772,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -751,23 +784,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -782,14 +798,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -818,7 +831,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -833,24 +845,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -871,47 +880,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=m +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 40d4a40a..a5d0f3c 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 14:03:54 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:55:55 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,12 +171,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -173,6 +191,8 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +205,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +241,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +265,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +307,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y @@ -302,8 +332,6 @@ CONFIG_DEFAULT_BIC=y CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -320,10 +348,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -331,6 +355,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -353,6 +378,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -374,10 +400,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -416,10 +443,14 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -429,7 +460,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -458,7 +488,9 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -472,15 +504,9 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -520,6 +546,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -532,6 +559,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -539,7 +570,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -551,6 +581,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -563,6 +594,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -584,6 +619,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -592,7 +628,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -600,7 +635,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -622,7 +656,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -649,7 +682,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -668,49 +703,53 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -719,9 +758,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set @@ -757,7 +798,14 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set CONFIG_FB_SM501=y +# CONFIG_FB_COBALT is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -787,6 +835,7 @@ CONFIG_FONT_8x16=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -807,6 +856,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -815,15 +865,18 @@ CONFIG_USB=m CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -849,13 +902,16 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -868,10 +924,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -896,36 +948,14 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -940,25 +970,21 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y -# CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -987,7 +1013,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1002,24 +1027,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1040,47 +1062,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v0.10.2 From dab8c6deaf1d654d09c3de8bd4c286d424df255a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 8 May 2008 23:06:17 +0400 Subject: [MIPS] Au1200: MMC resource size off by one Au12x0 MMC platform device strangely claims 0x41 bytes for its memory-mapped registers. Make it claim the whole 0x80000 instead according to the memory map given in the datasheets. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 8cae775..74d6d4a 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = { static struct resource au1xxx_mmc_resources[] = { [0] = { .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x40, + .end = SD0_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [1] = { .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x40, + .end = SD1_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [2] = { -- cgit v0.10.2 From 732a675a6303156d1a197dc780b0712bd4b49d46 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Sat, 14 Jun 2008 07:57:25 -0500 Subject: [IA64] Fix CONFIG_IA64_SGI_UV build error Fix build error in CONFIG_IA64_SGI_UV config. (GENERIC builds are ok). Signed-off-by: Jack Steiner Signed-off-by: Tony Luck diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 88f1a55..e67ee3f 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -57,6 +57,7 @@ core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/ core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/ +core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/ core-$(CONFIG_KVM) += arch/ia64/kvm/ drivers-$(CONFIG_PCI) += arch/ia64/pci/ diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c index 9aa7432..cf5f28a 100644 --- a/arch/ia64/uv/kernel/setup.c +++ b/arch/ia64/uv/kernel/setup.c @@ -17,6 +17,9 @@ DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); +#ifdef CONFIG_IA64_SGI_UV +int sn_prom_type; +#endif struct redir_addr { unsigned long redirect; @@ -64,6 +67,15 @@ void __init uv_setup(char **cmdline_p) m_n_config.s.m_skt = 37; m_n_config.s.n_skt = 0; mmr_base = 0; +#if 0 + /* Need BIOS calls - TDB */ + if (!ia64_sn_is_fake_prom()) + sn_prom_type = 1; + else +#endif + sn_prom_type = 2; + printk(KERN_INFO "Running on medusa with %s PROM\n", + (sn_prom_type == 1) ? "real" : "fake"); } else { get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); node_id.v = uv_read_local_mmr(UVH_NODE_ID); diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h index c3fd3eb..c2611f6 100644 --- a/include/asm-ia64/sn/simulator.h +++ b/include/asm-ia64/sn/simulator.h @@ -8,7 +8,7 @@ #ifndef _ASM_IA64_SN_SIMULATOR_H #define _ASM_IA64_SN_SIMULATOR_H - +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV) #define SNMAGIC 0xaeeeeeee8badbeefL #define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;}) @@ -16,5 +16,10 @@ #define IS_RUNNING_ON_SIMULATOR() (sn_prom_type) #define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2) extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ +#else +#define IS_MEDUSA() 0 +#define SIMULATOR_SLEEP() +#define IS_RUNNING_ON_SIMULATOR() 0 +#endif #endif /* _ASM_IA64_SN_SIMULATOR_H */ -- cgit v0.10.2 From b052beb0432616aa4dac2b167e7809feae993991 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 16 Jun 2008 13:36:29 +0100 Subject: MN10300: Kill linux/a.out.h inclusions Kill linux/a.out.h inclusions in the MN10300 arch code. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 3b0d579..9c623c8 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 6b7ce26..017121c 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 702773b16e83fcddc41e0019b8214d3c3cecedbe Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:11:54 +0100 Subject: Include in fs/exec.c only for Alpha. We only need it for the /sbin/loader hack for OSF/1 executables, and we don't want to include it otherwise. While we're at it, remove the redundant '&& CONFIG_ARCH_SUPPORTS_AOUT' in the ifdef around that code. It's already dependent on __alpha__, and CONFIG_ARCH_SUPPORTS_AOUT is hard-coded to 'y' there. Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index 9448f1b..da94a6f 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -61,6 +60,11 @@ #include #endif +#ifdef __alpha__ +/* for /sbin/loader handling in search_binary_handler() */ +#include +#endif + int core_uses_pid; char core_pattern[CORENAME_MAX_SIZE] = "core"; int suid_dumpable = 0; @@ -1155,7 +1159,7 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) { int try,retval; struct linux_binfmt *fmt; -#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT) +#ifdef __alpha__ /* handle /sbin/loader.. */ { struct exec * eh = (struct exec *) bprm->buf; -- cgit v0.10.2 From a9e0f5293d4999f93b469af4e70382db800a8204 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:18:13 +0100 Subject: Remove last traces of a.out support from ELF loader. In commit d20894a23708c2af75966534f8e4dedb46d48db2 ("Remove a.out interpreter support in ELF loader"), Andi removed support for a.out interpreters from the ELF loader, which was only ever needed for the transition from a.out to ELF. This removes the last traces of that support, in particular the inclusion of . Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 0fa95b1..d48ff5f 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -548,7 +547,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) struct { struct elfhdr elf_ex; struct elfhdr interp_elf_ex; - struct exec interp_ex; } *loc; loc = kmalloc(sizeof(*loc), GFP_KERNEL); @@ -680,7 +678,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) } /* Get the exec headers */ - loc->interp_ex = *((struct exec *)bprm->buf); loc->interp_elf_ex = *((struct elfhdr *)bprm->buf); break; } -- cgit v0.10.2 From 9a8ea36967afad617d9b0930b6fe7592b9ed9772 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:18:24 +0100 Subject: Remove #ifdef CONFIG_ARCH_SUPPORTS_AOUT from This file is only included where it makes sense now, so there's no need for the CONFIG_ARCH_SUPPORTS_AOUT conditional -- and that conditional is bad, because we want to export to userspace. Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/include/linux/a.out.h b/include/linux/a.out.h index 208f4e8..e86dfca 100644 --- a/include/linux/a.out.h +++ b/include/linux/a.out.h @@ -1,8 +1,6 @@ #ifndef __A_OUT_GNU_H__ #define __A_OUT_GNU_H__ -#ifdef CONFIG_ARCH_SUPPORTS_AOUT - #define __GNU_EXEC_MACROS__ #ifndef __STRUCT_EXEC_OVERRIDE__ @@ -277,10 +275,4 @@ struct relocation_info #endif /* no N_RELOCATION_INFO_DECLARED. */ #endif /*__ASSEMBLY__ */ -#else /* CONFIG_ARCH_SUPPORTS_AOUT */ -#ifndef __ASSEMBLY__ -struct exec { -}; -#endif -#endif /* CONFIG_ARCH_SUPPORTS_AOUT */ #endif /* __A_OUT_GNU_H__ */ -- cgit v0.10.2 From e53d6a152793a38aa334d6f7a4850642ae45cedc Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:24:17 +0100 Subject: Export to userspace again. This seems to have been removed accidentally in commit ed7b1889da256977574663689b598d88950bbd23 ("Unexport asm/page.h"), but wasn't supposed to have been -- the original patch at http://lkml.org/lkml/2007/10/30/144 just moved it from $(header-y) to $(unifdef-y) Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 93b9885..b6fbb25 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -166,6 +166,9 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h +ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +unifdef-y += a.out.h +endif unifdef-y += apm_bios.h unifdef-y += atalk.h unifdef-y += atmdev.h -- cgit v0.10.2 From 3878f110f71a0971ff7acc15dd6db711b6ef37c6 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:30:49 -0700 Subject: ocfs2: Move the hb_ctl_path sysctl into the stack glue. ocfs2 needs to call out to the hb_ctl program at unmount for all cluster stacks. The first step is to move the hb_ctl_path sysctl out of the o2cb code and into the generic stack glue. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c index cf9401e..cfdb08b 100644 --- a/fs/ocfs2/cluster/nodemanager.c +++ b/fs/ocfs2/cluster/nodemanager.c @@ -21,7 +21,6 @@ #include #include -#include #include #include "tcp.h" @@ -36,65 +35,6 @@ * cluster references throughout where nodes are looked up */ struct o2nm_cluster *o2nm_single_cluster = NULL; -#define OCFS2_MAX_HB_CTL_PATH 256 -static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; - -static ctl_table ocfs2_nm_table[] = { - { - .ctl_name = 1, - .procname = "hb_ctl_path", - .data = ocfs2_hb_ctl_path, - .maxlen = OCFS2_MAX_HB_CTL_PATH, - .mode = 0644, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string, - }, - { .ctl_name = 0 } -}; - -static ctl_table ocfs2_mod_table[] = { - { - .ctl_name = FS_OCFS2_NM, - .procname = "nm", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_nm_table - }, - { .ctl_name = 0} -}; - -static ctl_table ocfs2_kern_table[] = { - { - .ctl_name = FS_OCFS2, - .procname = "ocfs2", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_mod_table - }, - { .ctl_name = 0} -}; - -static ctl_table ocfs2_root_table[] = { - { - .ctl_name = CTL_FS, - .procname = "fs", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_kern_table - }, - { .ctl_name = 0 } -}; - -static struct ctl_table_header *ocfs2_table_header = NULL; - -const char *o2nm_get_hb_ctl_path(void) -{ - return ocfs2_hb_ctl_path; -} -EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path); struct o2nm_node *o2nm_get_node_by_num(u8 node_num) { @@ -941,9 +881,6 @@ void o2nm_undepend_this_node(void) static void __exit exit_o2nm(void) { - if (ocfs2_table_header) - unregister_sysctl_table(ocfs2_table_header); - /* XXX sync with hb callbacks and shut down hb? */ o2net_unregister_hb_callbacks(); configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys); @@ -964,16 +901,9 @@ static int __init init_o2nm(void) if (ret) goto out; - ocfs2_table_header = register_sysctl_table(ocfs2_root_table); - if (!ocfs2_table_header) { - printk(KERN_ERR "nodemanager: unable to register sysctl\n"); - ret = -ENOMEM; /* or something. */ - goto out_o2net; - } - ret = o2net_register_hb_callbacks(); if (ret) - goto out_sysctl; + goto out_o2net; config_group_init(&o2nm_cluster_group.cs_subsys.su_group); mutex_init(&o2nm_cluster_group.cs_subsys.su_mutex); @@ -990,8 +920,6 @@ static int __init init_o2nm(void) configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys); out_callbacks: o2net_unregister_hb_callbacks(); -out_sysctl: - unregister_sysctl_table(ocfs2_table_header); out_o2net: o2net_exit(); out: diff --git a/fs/ocfs2/cluster/nodemanager.h b/fs/ocfs2/cluster/nodemanager.h index 7c86036..c992ea0 100644 --- a/fs/ocfs2/cluster/nodemanager.h +++ b/fs/ocfs2/cluster/nodemanager.h @@ -33,10 +33,6 @@ #include #include -#define FS_OCFS2_NM 1 - -const char *o2nm_get_hb_ctl_path(void); - struct o2nm_node { spinlock_t nd_lock; struct config_item nd_item; diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index bbd1667..fb26a7c 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -338,7 +338,7 @@ static void o2hb_stop(const char *group) int ret; char *argv[5], *envp[3]; - argv[0] = (char *)o2nm_get_hb_ctl_path(); + argv[0] = (char *)ocfs2_get_hb_ctl_path(); argv[1] = "-K"; argv[2] = "-u"; argv[3] = (char *)group; diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 119f60c..fb9b8e0 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "ocfs2_fs.h" @@ -548,10 +549,92 @@ error: return ret; } +/* + * Sysctl bits + * + * The sysctl lives at /proc/sys/fs/ocfs2/nm/hb_ctl_path. The 'nm' doesn't + * make as much sense in a multiple cluster stack world, but it's safer + * and easier to preserve the name. + */ + +#define FS_OCFS2_NM 1 + +#define OCFS2_MAX_HB_CTL_PATH 256 +static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; + +static ctl_table ocfs2_nm_table[] = { + { + .ctl_name = 1, + .procname = "hb_ctl_path", + .data = ocfs2_hb_ctl_path, + .maxlen = OCFS2_MAX_HB_CTL_PATH, + .mode = 0644, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string, + }, + { .ctl_name = 0 } +}; + +static ctl_table ocfs2_mod_table[] = { + { + .ctl_name = FS_OCFS2_NM, + .procname = "nm", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_nm_table + }, + { .ctl_name = 0} +}; + +static ctl_table ocfs2_kern_table[] = { + { + .ctl_name = FS_OCFS2, + .procname = "ocfs2", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_mod_table + }, + { .ctl_name = 0} +}; + +static ctl_table ocfs2_root_table[] = { + { + .ctl_name = CTL_FS, + .procname = "fs", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_kern_table + }, + { .ctl_name = 0 } +}; + +static struct ctl_table_header *ocfs2_table_header = NULL; + +const char *ocfs2_get_hb_ctl_path(void) +{ + return ocfs2_hb_ctl_path; +} +EXPORT_SYMBOL_GPL(ocfs2_get_hb_ctl_path); + + +/* + * Initialization + */ + static int __init ocfs2_stack_glue_init(void) { strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB); + ocfs2_table_header = register_sysctl_table(ocfs2_root_table); + if (!ocfs2_table_header) { + printk(KERN_ERR + "ocfs2 stack glue: unable to register sysctl\n"); + return -ENOMEM; /* or something. */ + } + return ocfs2_sysfs_init(); } @@ -559,6 +642,8 @@ static void __exit ocfs2_stack_glue_exit(void) { lproto = NULL; ocfs2_sysfs_exit(); + if (ocfs2_table_header) + unregister_sysctl_table(ocfs2_table_header); } MODULE_AUTHOR("Oracle"); diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index 005e4f1..c9fb01a 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -258,4 +258,6 @@ void ocfs2_stack_glue_set_locking_protocol(struct ocfs2_locking_protocol *proto) /* Used by stack plugins */ int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin); void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin); +const char *ocfs2_get_hb_ctl_path(void); + #endif /* STACKGLUE_H */ -- cgit v0.10.2 From 9f9a99f4eccc64650e932090cff0ebd07b81e334 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:43:58 -0700 Subject: ocfs2: Move the call of ocfs2_hb_ctl into the stack glue. Take o2hb_stop() out of the o2cb code and make it part of the generic stack glue as ocfs2_leave_group(). This also allows us to remove the ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now part of stackglue.c. o2cb no longer needs a ->hangup() function. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index fb26a7c..765ade5 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -333,43 +333,6 @@ static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn, return 0; } -static void o2hb_stop(const char *group) -{ - int ret; - char *argv[5], *envp[3]; - - argv[0] = (char *)ocfs2_get_hb_ctl_path(); - argv[1] = "-K"; - argv[2] = "-u"; - argv[3] = (char *)group; - argv[4] = NULL; - - mlog(0, "Run: %s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]); - - /* minimal command environment taken from cpu_run_sbin_hotplug */ - envp[0] = "HOME=/"; - envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; - envp[2] = NULL; - - ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC); - if (ret < 0) - mlog_errno(ret); -} - -/* - * Hangup is a hack for tools compatibility. Older ocfs2-tools software - * expects the filesystem to call "ocfs2_hb_ctl" during unmount. This - * happens regardless of whether the DLM got started, so we can't do it - * in ocfs2_cluster_disconnect(). We bring the o2hb_stop() function into - * the glue and provide a "hangup" API for super.c to call. - * - * Other stacks will eventually provide a NULL ->hangup() pointer. - */ -static void o2cb_cluster_hangup(const char *group, int grouplen) -{ - o2hb_stop(group); -} - static int o2cb_cluster_this_node(unsigned int *node) { int node_num; @@ -388,7 +351,6 @@ static int o2cb_cluster_this_node(unsigned int *node) static struct ocfs2_stack_operations o2cb_stack_ops = { .connect = o2cb_cluster_connect, .disconnect = o2cb_cluster_disconnect, - .hangup = o2cb_cluster_hangup, .this_node = o2cb_cluster_this_node, .dlm_lock = o2cb_dlm_lock, .dlm_unlock = o2cb_dlm_unlock, diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index fb9b8e0..5f78ff4 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -34,11 +34,13 @@ #define OCFS2_STACK_PLUGIN_O2CB "o2cb" #define OCFS2_STACK_PLUGIN_USER "user" +#define OCFS2_MAX_HB_CTL_PATH 256 static struct ocfs2_locking_protocol *lproto; static DEFINE_SPINLOCK(ocfs2_stack_lock); static LIST_HEAD(ocfs2_stack_list); static char cluster_stack_name[OCFS2_STACK_LABEL_LEN + 1]; +static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; /* * The stack currently in use. If not null, active_stack->sp_count > 0, @@ -363,6 +365,42 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn, } EXPORT_SYMBOL_GPL(ocfs2_cluster_disconnect); +/* + * Leave the group for this filesystem. This is executed by a userspace + * program (stored in ocfs2_hb_ctl_path). + */ +static void ocfs2_leave_group(const char *group) +{ + int ret; + char *argv[5], *envp[3]; + + argv[0] = ocfs2_hb_ctl_path; + argv[1] = "-K"; + argv[2] = "-u"; + argv[3] = (char *)group; + argv[4] = NULL; + + /* minimal command environment taken from cpu_run_sbin_hotplug */ + envp[0] = "HOME=/"; + envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; + envp[2] = NULL; + + ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC); + if (ret < 0) { + printk(KERN_ERR + "ocfs2: Error %d running user helper " + "\"%s %s %s %s\"\n", + ret, argv[0], argv[1], argv[2], argv[3]); + } +} + +/* + * Hangup is a required post-umount. ocfs2-tools software expects the + * filesystem to call "ocfs2_hb_ctl" during unmount. This happens + * regardless of whether the DLM got started, so we can't do it + * in ocfs2_cluster_disconnect(). The ocfs2_leave_group() function does + * the actual work. + */ void ocfs2_cluster_hangup(const char *group, int grouplen) { BUG_ON(group == NULL); @@ -371,6 +409,8 @@ void ocfs2_cluster_hangup(const char *group, int grouplen) if (active_stack->sp_ops->hangup) active_stack->sp_ops->hangup(group, grouplen); + ocfs2_leave_group(group); + /* cluster_disconnect() was called with hangup_pending==1 */ ocfs2_stack_driver_put(); } @@ -559,9 +599,6 @@ error: #define FS_OCFS2_NM 1 -#define OCFS2_MAX_HB_CTL_PATH 256 -static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; - static ctl_table ocfs2_nm_table[] = { { .ctl_name = 1, @@ -613,12 +650,6 @@ static ctl_table ocfs2_root_table[] = { static struct ctl_table_header *ocfs2_table_header = NULL; -const char *ocfs2_get_hb_ctl_path(void) -{ - return ocfs2_hb_ctl_path; -} -EXPORT_SYMBOL_GPL(ocfs2_get_hb_ctl_path); - /* * Initialization diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index c9fb01a..fe3fd2a 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -258,6 +258,5 @@ void ocfs2_stack_glue_set_locking_protocol(struct ocfs2_locking_protocol *proto) /* Used by stack plugins */ int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin); void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin); -const char *ocfs2_get_hb_ctl_path(void); #endif /* STACKGLUE_H */ -- cgit v0.10.2 From 2c39450b39880e162b3eb339672314101f58ee1a Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:58:26 -0700 Subject: ocfs2: Remove ->hangup() from stack glue operations. The ->hangup() call was only used to execute ocfs2_hb_ctl. Now that the generic stack glue code handles this, the underlying stack drivers don't need to know about it. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index 765ade5..fcd120f 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -317,8 +317,7 @@ out: return rc; } -static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn, - int hangup_pending) +static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn) { struct dlm_ctxt *dlm = conn->cc_lockspace; struct o2dlm_private *priv = conn->cc_private; diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index 6b97d11..c021280 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -816,8 +816,7 @@ out: return rc; } -static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn, - int hangup_pending) +static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn) { dlm_release_lockspace(conn->cc_lockspace, 2); conn->cc_lockspace = NULL; diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 5f78ff4..10e149a 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -352,7 +352,7 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn, BUG_ON(conn == NULL); - ret = active_stack->sp_ops->disconnect(conn, hangup_pending); + ret = active_stack->sp_ops->disconnect(conn); /* XXX Should we free it anyway? */ if (!ret) { @@ -406,9 +406,6 @@ void ocfs2_cluster_hangup(const char *group, int grouplen) BUG_ON(group == NULL); BUG_ON(group[grouplen] != '\0'); - if (active_stack->sp_ops->hangup) - active_stack->sp_ops->hangup(group, grouplen); - ocfs2_leave_group(group); /* cluster_disconnect() was called with hangup_pending==1 */ diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index fe3fd2a..db56281 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -134,22 +134,10 @@ struct ocfs2_stack_operations { * be freed. Thus, a stack must not return from ->disconnect() * until it will no longer reference the conn pointer. * - * If hangup_pending is zero, ocfs2_cluster_disconnect() will also - * be dropping the reference on the module. + * Once this call returns, the stack glue will be dropping this + * connection's reference on the module. */ - int (*disconnect)(struct ocfs2_cluster_connection *conn, - int hangup_pending); - - /* - * ocfs2_cluster_hangup() exists for compatibility with older - * ocfs2 tools. Only the classic stack really needs it. As such - * ->hangup() is not required of all stacks. See the comment by - * ocfs2_cluster_hangup() for more details. - * - * Note that ocfs2_cluster_hangup() can only be called if - * hangup_pending was passed to ocfs2_cluster_disconnect(). - */ - void (*hangup)(const char *group, int grouplen); + int (*disconnect)(struct ocfs2_cluster_connection *conn); /* * ->this_node() returns the cluster's unique identifier for the -- cgit v0.10.2 From 95e904c7da715aa2dbfb595da66b63de37a0bb04 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 11 May 2008 05:55:33 +0530 Subject: sched: fix defined-but-unused warning Fix this warning, which appears with !CONFIG_SMP: kernel/sched.c:1216: warning: `init_hrtick' defined but not used Signed-off-by: Rabin Vincent Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index eaf6751..0422852 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1127,6 +1127,7 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer) return HRTIMER_NORESTART; } +#ifdef CONFIG_SMP static void hotplug_hrtick_disable(int cpu) { struct rq *rq = cpu_rq(cpu); @@ -1182,6 +1183,7 @@ static void init_hrtick(void) { hotcpu_notifier(hotplug_hrtick, 0); } +#endif /* CONFIG_SMP */ static void init_rq_hrtick(struct rq *rq) { -- cgit v0.10.2 From 2f6a77d56523c14651236bc401a99b0e2aca2fdd Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 17 Jun 2008 11:47:27 -0400 Subject: Input: i8042 - retry failed CTR writes when resuming There are systems that fail in i8042_resume() with i8042: Can't write CTR to resume as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the controller claimed itself to be ready before. One retry after failing write fixes the problems on the failing systems. Reported-by: Helmut Schaa Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 592ff55..170f71e 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -952,8 +952,12 @@ static int i8042_resume(struct platform_device *dev) i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS; i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT); if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { - printk(KERN_ERR "i8042: Can't write CTR to resume\n"); - return -EIO; + printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n"); + msleep(50); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042: CTR write retry failed\n"); + return -EIO; + } } -- cgit v0.10.2 From 90d95ef617a535a8832bdcb8dee07bf591e5dd82 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 17 Jun 2008 11:56:55 -0400 Subject: Input: appletouch - implement reset-resume logic On some boxes the touchpad needs to be reinitialized after resume to make it function again. This fixes bugzilla #10825. Signed-off-by: Oliver Neukum Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 8dd3942..ce6fdec 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -589,6 +589,21 @@ static void atp_close(struct input_dev *input) dev->open = 0; } +static int atp_handle_geyser(struct atp *dev) +{ + struct usb_device *udev = dev->udev; + + if (!atp_is_fountain(dev)) { + /* switch to raw sensor mode */ + if (atp_geyser_init(udev)) + return -EIO; + + printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); + } + + return 0; +} + static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) { struct atp *dev; @@ -633,14 +648,6 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id else dev->datalen = 81; - if (!atp_is_fountain(dev)) { - /* switch to raw sensor mode */ - if (atp_geyser_init(udev)) - goto err_free_devs; - - printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); - } - dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) goto err_free_devs; @@ -654,6 +661,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id usb_rcvintpipe(udev, int_in_endpointAddr), dev->data, dev->datalen, atp_complete, dev, 1); + error = atp_handle_geyser(dev); + if (error) + goto err_free_buffer; + usb_make_path(udev, dev->phys, sizeof(dev->phys)); strlcat(dev->phys, "/input0", sizeof(dev->phys)); @@ -744,6 +755,20 @@ static void atp_disconnect(struct usb_interface *iface) printk(KERN_INFO "input: appletouch disconnected\n"); } +static int atp_recover(struct atp *dev) +{ + int error; + + error = atp_handle_geyser(dev); + if (error) + return error; + + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + return 0; +} + static int atp_suspend(struct usb_interface *iface, pm_message_t message) { struct atp *dev = usb_get_intfdata(iface); @@ -764,12 +789,20 @@ static int atp_resume(struct usb_interface *iface) return 0; } +static int atp_reset_resume(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + + return atp_recover(dev); +} + static struct usb_driver atp_driver = { .name = "appletouch", .probe = atp_probe, .disconnect = atp_disconnect, .suspend = atp_suspend, .resume = atp_resume, + .reset_resume = atp_reset_resume, .id_table = atp_table, }; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 2e20193..ec15f1d 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ + { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v0.10.2 From 58c2709c2b551704f289cb3442a41d2a0cf40b6e Mon Sep 17 00:00:00 2001 From: Thomas Mingarelli Date: Thu, 12 Jun 2008 20:20:32 +0000 Subject: Revert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static" The driver needs the asmlinkage tag and the CFLAGS line in the Makefile. Without it the driver doesn't work. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6a63535..2bc1f74 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -145,8 +145,8 @@ MODULE_DEVICE_TABLE(pci, hpwdt_devices); #define HPWDT_ARCH 32 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +asmlinkage void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushl %ebp \n\t" "movl %esp, %ebp \n\t" @@ -333,8 +333,8 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +asmlinkage void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushq %rbp \n\t" "movq %rsp, %rbp \n\t" -- cgit v0.10.2 From 4dc7347a3b4a76705b7fd00b271847dd10cf5a32 Mon Sep 17 00:00:00 2001 From: Thomas Mingarelli Date: Thu, 12 Jun 2008 20:20:32 +0000 Subject: [WATCHDOG] hpwdt: Add CFLAGS to get driver working To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 25b352b..8662a6b 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o +CFLAGS_hpwdt.o += -O obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o -- cgit v0.10.2 From 42a886af728c089df8da1b0017b0e7e6c81b5335 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 17 Jun 2008 17:47:50 -0700 Subject: x86-64: Fix "bytes left to copy" return value for copy_from_user() Most users by far do not care about the exact return value (they only really care about whether the copy succeeded in its entirety or not), but a few special core routines actually care deeply about exactly how many bytes were copied from user space. And the unrolled versions of the x86-64 user copy routines would sometimes report that it had copied more bytes than it actually had. Very few uses actually have partial copies to begin with, but to make this bug even harder to trigger, most x86 CPU's use the "rep string" instructions for normal user copies, and that version didn't have this issue. To make it even harder to hit, the one user of this that really cared about the return value (and used the uncached version of the copy that doesn't use the "rep string" instructions) was the generic write routine, which pre-populated its source, once more hiding the problem by avoiding the exception case that triggers the bug. In other words, very special thanks to Bron Gondwana who not only triggered this, but created a test-program to show it, and bisected the behavior down to commit 08291429cfa6258c4cd95d8833beb40f828b194e ("mm: fix pagecache write deadlocks") which changed the access pattern just enough that you can now trigger it with 'writev()' with multiple iovec's. That commit itself was not the cause of the bug, it just allowed all the stars to align just right that you could trigger the problem. [ Side note: this is just the minimal fix to make the copy routines (with __copy_from_user_inatomic_nocache as the particular version that was involved in showing this) have the right return values. We really should improve on the exceptional case further - to make the copy do a byte-accurate copy up to the exact page limit that causes it to fail. As it is, the callers have to do extra work to handle the limit case gracefully. ] Reported-by: Bron Gondwana Cc: Nick Piggin Cc: Andrew Morton Cc: Andi Kleen Cc: Al Viro Signed-off-by: Linus Torvalds (which didn't have this problem), and since most users that do the carethis was very hard to trigger, but diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index 70bebd3..ee1c3f6 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -217,19 +217,19 @@ ENTRY(copy_user_generic_unrolled) /* table sorted by exception address */ .section __ex_table,"a" .align 8 - .quad .Ls1,.Ls1e - .quad .Ls2,.Ls2e - .quad .Ls3,.Ls3e - .quad .Ls4,.Ls4e - .quad .Ld1,.Ls1e + .quad .Ls1,.Ls1e /* Ls1-Ls4 have copied zero bytes */ + .quad .Ls2,.Ls1e + .quad .Ls3,.Ls1e + .quad .Ls4,.Ls1e + .quad .Ld1,.Ls1e /* Ld1-Ld4 have copied 0-24 bytes */ .quad .Ld2,.Ls2e .quad .Ld3,.Ls3e .quad .Ld4,.Ls4e - .quad .Ls5,.Ls5e - .quad .Ls6,.Ls6e - .quad .Ls7,.Ls7e - .quad .Ls8,.Ls8e - .quad .Ld5,.Ls5e + .quad .Ls5,.Ls5e /* Ls5-Ls8 have copied 32 bytes */ + .quad .Ls6,.Ls5e + .quad .Ls7,.Ls5e + .quad .Ls8,.Ls5e + .quad .Ld5,.Ls5e /* Ld5-Ld8 have copied 32-56 bytes */ .quad .Ld6,.Ls6e .quad .Ld7,.Ls7e .quad .Ld8,.Ls8e @@ -244,11 +244,8 @@ ENTRY(copy_user_generic_unrolled) .quad .Le5,.Le_zero .previous - /* compute 64-offset for main loop. 8 bytes accuracy with error on the - pessimistic side. this is gross. it would be better to fix the - interface. */ /* eax: zero, ebx: 64 */ -.Ls1e: addl $8,%eax +.Ls1e: addl $8,%eax /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */ .Ls2e: addl $8,%eax .Ls3e: addl $8,%eax .Ls4e: addl $8,%eax diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S index 5196762..9d3d1ab 100644 --- a/arch/x86/lib/copy_user_nocache_64.S +++ b/arch/x86/lib/copy_user_nocache_64.S @@ -145,19 +145,19 @@ ENTRY(__copy_user_nocache) /* table sorted by exception address */ .section __ex_table,"a" .align 8 - .quad .Ls1,.Ls1e - .quad .Ls2,.Ls2e - .quad .Ls3,.Ls3e - .quad .Ls4,.Ls4e - .quad .Ld1,.Ls1e + .quad .Ls1,.Ls1e /* .Ls[1-4] - 0 bytes copied */ + .quad .Ls2,.Ls1e + .quad .Ls3,.Ls1e + .quad .Ls4,.Ls1e + .quad .Ld1,.Ls1e /* .Ld[1-4] - 0..24 bytes coped */ .quad .Ld2,.Ls2e .quad .Ld3,.Ls3e .quad .Ld4,.Ls4e - .quad .Ls5,.Ls5e - .quad .Ls6,.Ls6e - .quad .Ls7,.Ls7e - .quad .Ls8,.Ls8e - .quad .Ld5,.Ls5e + .quad .Ls5,.Ls5e /* .Ls[5-8] - 32 bytes copied */ + .quad .Ls6,.Ls5e + .quad .Ls7,.Ls5e + .quad .Ls8,.Ls5e + .quad .Ld5,.Ls5e /* .Ld[5-8] - 32..56 bytes copied */ .quad .Ld6,.Ls6e .quad .Ld7,.Ls7e .quad .Ld8,.Ls8e @@ -172,11 +172,8 @@ ENTRY(__copy_user_nocache) .quad .Le5,.Le_zero .previous - /* compute 64-offset for main loop. 8 bytes accuracy with error on the - pessimistic side. this is gross. it would be better to fix the - interface. */ /* eax: zero, ebx: 64 */ -.Ls1e: addl $8,%eax +.Ls1e: addl $8,%eax /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */ .Ls2e: addl $8,%eax .Ls3e: addl $8,%eax .Ls4e: addl $8,%eax -- cgit v0.10.2 From cd50e89244087432a70598e432ff199a009b0e73 Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Sun, 15 Jun 2008 18:05:01 +0300 Subject: Unignore vmlinux.lds.h from Git. Added !vmlinux.lds.h to .gitignore because it would otherwise be ignored. Signed-off-by: Eduard - Gabriel Munteanu Acked-by: Mathieu Desnoyers Signed-off-by: Linus Torvalds diff --git a/.gitignore b/.gitignore index d24ad50..9bb1cb6 100644 --- a/.gitignore +++ b/.gitignore @@ -26,6 +26,7 @@ tags TAGS vmlinux* !vmlinux.lds.S +!vmlinux.lds.h System.map Module.markers Module.symvers -- cgit v0.10.2 From f948d56435fc1f7506f08866302ecd6e60b533dd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 17 Jun 2008 18:05:40 +0200 Subject: fuse: fix thinko in max I/O size calucation Use max not min to enforce a lower limit on the max I/O size. This bug was introduced by "fuse: fix max i/o size calculation" (commit e5d9a0df07484d6d191756878c974e4307fb24ce). Thanks to Brian Wang for noticing. Reported-by: Brian Wang Signed-off-by: Miklos Szeredi Acked-by: Szabolcs Szakacsits Signed-off-by: Linus Torvalds diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 43e9951..3141690 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -591,7 +591,7 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages); fc->minor = arg->minor; fc->max_write = arg->minor < 5 ? 4096 : arg->max_write; - fc->max_write = min_t(unsigned, 4096, fc->max_write); + fc->max_write = max_t(unsigned, 4096, fc->max_write); fc->conn_init = 1; } fuse_put_request(fc, req); @@ -667,7 +667,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) fc->flags = d.flags; fc->user_id = d.user_id; fc->group_id = d.group_id; - fc->max_read = min_t(unsigned, 4096, d.max_read); + fc->max_read = max_t(unsigned, 4096, d.max_read); /* Used by get_root_inode() */ sb->s_fs_info = fc; -- cgit v0.10.2 From 50db04dd9c74178e68a981a7127c37252ffb3242 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sun, 15 Jun 2008 00:47:36 +0200 Subject: debugobjects: fix lockdep warning Daniel J Blueman reported: | ======================================================= | [ INFO: possible circular locking dependency detected ] | 2.6.26-rc5-201c #1 | ------------------------------------------------------- | nscd/3669 is trying to acquire lock: | (&n->list_lock){.+..}, at: [] deactivate_slab+0x173/0x1e0 | | but task is already holding lock: | (&obj_hash[i].lock){++..}, at: [] | __debug_object_init+0x2f/0x350 | | which lock already depends on the new lock. There are two locks involved here; the first is a SLUB-local lock, and the second is a debugobjects-local lock. They are basically taken in two different orders: 1. SLUB { debugobjects { ... } } 2. debugobjects { SLUB { ... } } This patch changes pattern #2 by trying to fill the memory pool (e.g. the call into SLUB/kmalloc()) outside the debugobjects lock, so now the two patterns look like this: 1. SLUB { debugobjects { ... } } 2. SLUB { } debugobjects { ... } [ daniel.blueman@gmail.com: pool_lock needs to be taken irq safe in fill_pool ] Reported-by: Daniel J Blueman Signed-off-by: Vegard Nossum Signed-off-by: Thomas Gleixner diff --git a/lib/debugobjects.c b/lib/debugobjects.c index a76a5e1..85b18d7 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -68,6 +68,7 @@ static int fill_pool(void) { gfp_t gfp = GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN; struct debug_obj *new; + unsigned long flags; if (likely(obj_pool_free >= ODEBUG_POOL_MIN_LEVEL)) return obj_pool_free; @@ -81,10 +82,10 @@ static int fill_pool(void) if (!new) return obj_pool_free; - spin_lock(&pool_lock); + spin_lock_irqsave(&pool_lock, flags); hlist_add_head(&new->node, &obj_pool); obj_pool_free++; - spin_unlock(&pool_lock); + spin_unlock_irqrestore(&pool_lock, flags); } return obj_pool_free; } @@ -110,16 +111,13 @@ static struct debug_obj *lookup_object(void *addr, struct debug_bucket *b) } /* - * Allocate a new object. If the pool is empty and no refill possible, - * switch off the debugger. + * Allocate a new object. If the pool is empty, switch off the debugger. */ static struct debug_obj * alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr) { struct debug_obj *obj = NULL; - int retry = 0; -repeat: spin_lock(&pool_lock); if (obj_pool.first) { obj = hlist_entry(obj_pool.first, typeof(*obj), node); @@ -141,9 +139,6 @@ repeat: } spin_unlock(&pool_lock); - if (fill_pool() && !obj && !retry++) - goto repeat; - return obj; } @@ -261,6 +256,8 @@ __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack) struct debug_obj *obj; unsigned long flags; + fill_pool(); + db = get_bucket((unsigned long) addr); spin_lock_irqsave(&db->lock, flags); -- cgit v0.10.2 From b17879f71c2eb4a10f5a63918819d9d572b23a9a Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 18 Jun 2008 08:34:39 +1000 Subject: [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector A recent commit added support for the new 440x6 and 464 cores that have the added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the TLBs. The new bits were cleared in the finish_tlb_load function, however a similar bit of code was missed in the DataStorage interrupt vector. Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index c2b9dc4..22b5d2c 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -368,7 +368,12 @@ interrupt_base: rlwimi r11,r13,0,26,31 /* Insert static perms */ - rlwinm r11,r11,0,20,15 /* Clear U0-U3 */ + /* + * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added + * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see + * include/asm-powerpc/pgtable-ppc32.h for details). + */ + rlwinm r11,r11,0,20,10 /* find the TLB index that caused the fault. It has to be here. */ tlbsx r10, 0, r10 -- cgit v0.10.2 From 65ba6cdc837af9b77354d03987354196ac4eb308 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 18 Jun 2008 16:40:35 +1000 Subject: [POWERPC] Clear sub-page HPTE present bits when demoting page size When we demote a slice from 64k to 4k, and we are about to insert an HPTE for a 4k subpage and we notice that there is an existing 64k HPTE, we first invalidate that HPTE before inserting the new 4k subpage HPTE. Since the bits that encode which hash bucket the old HPTE was in overlap with the bits that encode which of the 16 subpages have HPTEs, we need to clear out the subpage HPTE-present bits before starting to insert HPTEs for the 4k subpages. If we don't do that, we can erroneously think that a subpage already has an HPTE when it doesn't. That in itself wouldn't be such a problem except that when we go to update the HPTE that we think is present on machines with a hypervisor, the hypervisor can tell us that the HPTE we think is there is actually there even though it isn't, which can lead to a process getting stuck in a loop, continually faulting. The reason for the confusion is that the AVPN (abbreviated virtual page number) we are looking for in the HPTE for a 4k subpage can actually match the AVPN in a stale HPTE for another 64k page. For example, the HPTE for the 4k subpage at 0x84000f000 will be in the same hash bucket and have the same AVPN as the HPTE for the 64k page at 0x8400f0000. This fixes the code to clear out the subpage HPTE-present bits. Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 21d2484..70f4c83 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -568,6 +568,10 @@ htab_inval_old_hpte: ld r7,STK_PARM(r9)(r1) /* ssize */ ld r8,STK_PARM(r8)(r1) /* local */ bl .flush_hash_page + /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */ + lis r0,_PAGE_HPTE_SUB@h + ori r0,r0,_PAGE_HPTE_SUB@l + andc r30,r30,r0 b htab_insert_pte htab_bail_ok: -- cgit v0.10.2 From fdf7be6f13b920f0d80c249c70f794a2f6d53992 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 18 Jun 2008 16:22:48 +0000 Subject: Revert "[WATCHDOG] hpwdt: Fix NMI handling." The old setup works better. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 2bc1f74..2686f3e 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -418,20 +418,23 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, static unsigned long rom_pl; static int die_nmi_called; - if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) { - spin_lock_irqsave(&rom_lock, rom_pl); - if (!die_nmi_called) - asminline_call(&cmn_regs, cru_rom_addr); - die_nmi_called = 1; - spin_unlock_irqrestore(&rom_lock, rom_pl); - if (cmn_regs.u1.ral != 0) { - panic("An NMI occurred, please see the Integrated " - "Management Log for details.\n"); - } + if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) + return NOTIFY_OK; + + spin_lock_irqsave(&rom_lock, rom_pl); + if (!die_nmi_called) + asminline_call(&cmn_regs, cru_rom_addr); + die_nmi_called = 1; + spin_unlock_irqrestore(&rom_lock, rom_pl); + if (cmn_regs.u1.ral == 0) { + printk(KERN_WARNING "hpwdt: An NMI occurred, " + "but unable to determine source.\n"); + } else { + panic("An NMI occurred, please see the Integrated " + "Management Log for details.\n"); } - die_nmi_called = 0; - return NOTIFY_DONE; + return NOTIFY_STOP; } /* -- cgit v0.10.2 From 0bf607c5b4edd13362e4add6ca1e81f8a9fbd47c Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 31 May 2008 19:01:26 +0200 Subject: firewire: don't panic on invalid AR request buffer BUG() at this place is wrong. (Unless if the low level driver would already do higher-level input validation of incoming request headers.) Invalid incoming requests or bugs in the controller which corrupt the AR-req buffer needlessly crashed the box because this is run in tasklet context. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index ccf0e4c..7f92c45 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -572,7 +572,8 @@ allocate_request(struct fw_packet *p) break; default: - BUG(); + fw_error("ERROR - corrupt request received - %08x %08x %08x\n", + p->header[0], p->header[1], p->header[2]); return NULL; } -- cgit v0.10.2 From ccff962943df539c5860aa120eecc189d70a308b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 31 May 2008 19:36:06 +0200 Subject: firewire: fw-ohci: use of uninitialized data in AR handler header_length and payload_length are filled with random data if an unknown tcode was read from the AR buffer (i.e. if the AR buffer contained invalid data). We still need a better strategy to recover from this, but at least handle_ar_packet now doesn't return out of bound buffer addresses anymore. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 4f02c55..b062e73 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -548,6 +548,11 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) p.header_length = 12; p.payload_length = 0; break; + + default: + /* FIXME: Stop context, discard everything, and restart? */ + p.header_length = 0; + p.payload_length = 0; } p.payload = (void *) buffer + p.header_length; -- cgit v0.10.2 From e896ec4302f45fdaf2fc78aec0093eca5478fe28 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 20:49:38 +0200 Subject: firewire: fw-ohci: disable PHY packet reception into AR context We want the rcvPhyPkt bit in LinkControl off before we start using the chip. However, the spec says that the reset value of it is undefined. Hence switch it explicitly off. https://bugzilla.redhat.com/show_bug.cgi?id=244576#c48 shows that for example the nForce2 integrated FireWire controller seems to have it on by default. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index b062e73..481d3f3 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1473,6 +1473,8 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwapData); + reg_write(ohci, OHCI1394_LinkControlClear, + OHCI1394_LinkControl_rcvPhyPkt); reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_rcvSelfID | OHCI1394_LinkControl_cycleTimerEnable | -- cgit v0.10.2 From affc9c24ade666f9903163c12686da567dbfe06f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 20:50:53 +0200 Subject: firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit OHCI 1.1 clause 5.10 requires that selfIDBufferPtr is valid when a 1 is written into LinkControl.rcvSelfID. This driver bug has so far not been known to cause harm because most chips obviously accept a later selfIDBufferPtr write, at least before HCControl.linkEnable is written. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson Signed-off-by: Kristian Høgsberg diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 481d3f3..96e3cce 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1473,6 +1473,7 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwapData); + reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); reg_write(ohci, OHCI1394_LinkControlClear, OHCI1394_LinkControl_rcvPhyPkt); reg_write(ohci, OHCI1394_LinkControlSet, @@ -1488,7 +1489,6 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) ar_context_run(&ohci->ar_request_ctx); ar_context_run(&ohci->ar_response_ctx); - reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000); reg_write(ohci, OHCI1394_IntEventClear, ~0); reg_write(ohci, OHCI1394_IntMaskClear, ~0); -- cgit v0.10.2 From 5cb84067d646fa3889463129dad8b218806b4698 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Fri, 6 Jun 2008 22:11:30 +0200 Subject: firewire: fill_bus_reset_event needs lock protection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Callers of fill_bus_reset_event() have to take card->lock. Otherwise access to node data may oops if node removal is in progress. A lockless alternative would be - event->local_node_id = card->local_node->node_id; + tmp = fw_node_get(card->local_node); + event->local_node_id = tmp->node_id; + fw_node_put(tmp); and ditto with the other node pointers which fill_bus_reset_event() accesses. But I went the locked route because one of the two callers already holds the lock. As a bonus, we don't need the memory barrier anymore because device->generation and device->node_id are written in a card->lock protected section. Signed-off-by: Stefan Richter Signed-off-by: Kristian Høgsberg diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c index dda1401..c639915 100644 --- a/drivers/firewire/fw-cdev.c +++ b/drivers/firewire/fw-cdev.c @@ -205,6 +205,7 @@ fw_device_op_read(struct file *file, return dequeue_event(client, buffer, count); } +/* caller must hold card->lock so that node pointers can be dereferenced here */ static void fill_bus_reset_event(struct fw_cdev_event_bus_reset *event, struct client *client) @@ -214,7 +215,6 @@ fill_bus_reset_event(struct fw_cdev_event_bus_reset *event, event->closure = client->bus_reset_closure; event->type = FW_CDEV_EVENT_BUS_RESET; event->generation = client->device->generation; - smp_rmb(); /* node_id must not be older than generation */ event->node_id = client->device->node_id; event->local_node_id = card->local_node->node_id; event->bm_node_id = 0; /* FIXME: We don't track the BM. */ @@ -274,6 +274,7 @@ static int ioctl_get_info(struct client *client, void *buffer) { struct fw_cdev_get_info *get_info = buffer; struct fw_cdev_event_bus_reset bus_reset; + struct fw_card *card = client->device->card; unsigned long ret = 0; client->version = get_info->version; @@ -299,13 +300,17 @@ static int ioctl_get_info(struct client *client, void *buffer) client->bus_reset_closure = get_info->bus_reset_closure; if (get_info->bus_reset != 0) { void __user *uptr = u64_to_uptr(get_info->bus_reset); + unsigned long flags; + spin_lock_irqsave(&card->lock, flags); fill_bus_reset_event(&bus_reset, client); + spin_unlock_irqrestore(&card->lock, flags); + if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset))) return -EFAULT; } - get_info->card = client->device->card->index; + get_info->card = card->index; return 0; } -- cgit v0.10.2 From 161b96e782ec995c55843101976d9c35b57aa109 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 14 Jun 2008 14:23:43 +0200 Subject: firewire: fw-ohci: unify printk prefixes The messages which can be enabled by fw-ohci's debug module parameter are changed from KERN_DEBUG to KERN_NOTICE level and uniformly prefixed with "firewire_ohci: ". This further simplifies communication with users when we ask them to capture debug messages. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 96e3cce..0b66306 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -265,27 +265,25 @@ static void log_irqs(u32 evt) !(evt & OHCI1394_busReset)) return; - printk(KERN_DEBUG KBUILD_MODNAME ": IRQ " - "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", - evt, - evt & OHCI1394_selfIDComplete ? " selfID" : "", - evt & OHCI1394_RQPkt ? " AR_req" : "", - evt & OHCI1394_RSPkt ? " AR_resp" : "", - evt & OHCI1394_reqTxComplete ? " AT_req" : "", - evt & OHCI1394_respTxComplete ? " AT_resp" : "", - evt & OHCI1394_isochRx ? " IR" : "", - evt & OHCI1394_isochTx ? " IT" : "", - evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", - evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", - evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", - evt & OHCI1394_regAccessFail ? " regAccessFail" : "", - evt & OHCI1394_busReset ? " busReset" : "", - evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | - OHCI1394_RSPkt | OHCI1394_reqTxComplete | - OHCI1394_respTxComplete | OHCI1394_isochRx | - OHCI1394_isochTx | OHCI1394_postedWriteErr | - OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | - OHCI1394_regAccessFail | OHCI1394_busReset) + fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, + evt & OHCI1394_selfIDComplete ? " selfID" : "", + evt & OHCI1394_RQPkt ? " AR_req" : "", + evt & OHCI1394_RSPkt ? " AR_resp" : "", + evt & OHCI1394_reqTxComplete ? " AT_req" : "", + evt & OHCI1394_respTxComplete ? " AT_resp" : "", + evt & OHCI1394_isochRx ? " IR" : "", + evt & OHCI1394_isochTx ? " IT" : "", + evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", + evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", + evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", + evt & OHCI1394_regAccessFail ? " regAccessFail" : "", + evt & OHCI1394_busReset ? " busReset" : "", + evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | + OHCI1394_RSPkt | OHCI1394_reqTxComplete | + OHCI1394_respTxComplete | OHCI1394_isochRx | + OHCI1394_isochTx | OHCI1394_postedWriteErr | + OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | + OHCI1394_regAccessFail | OHCI1394_busReset) ? " ?" : ""); } @@ -308,23 +306,22 @@ static void log_selfids(int node_id, int generation, int self_id_count, u32 *s) if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS))) return; - printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, " - "local node ID %04x\n", self_id_count, generation, node_id); + fw_notify("%d selfIDs, generation %d, local node ID %04x\n", + self_id_count, generation, node_id); for (; self_id_count--; ++s) if ((*s & 1 << 23) == 0) - printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] " - "%s gc=%d %s %s%s%s\n", - *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2), - speed[*s >> 14 & 3], *s >> 16 & 63, - power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "", - *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : ""); + fw_notify("selfID 0: %08x, phy %d [%c%c%c] " + "%s gc=%d %s %s%s%s\n", + *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2), + speed[*s >> 14 & 3], *s >> 16 & 63, + power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "", + *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : ""); else - printk(KERN_DEBUG "selfID n: %08x, phy %d " - "[%c%c%c%c%c%c%c%c]\n", - *s, *s >> 24 & 63, - _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10), - _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2)); + fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n", + *s, *s >> 24 & 63, + _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10), + _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2)); } static const char *evts[] = { @@ -373,15 +370,14 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt) evt = 0x1f; if (evt == OHCI1394_evt_bus_reset) { - printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n", - dir, (header[2] >> 16) & 0xff); + fw_notify("A%c evt_bus_reset, generation %d\n", + dir, (header[2] >> 16) & 0xff); return; } if (header[0] == ~header[1]) { - printk(KERN_DEBUG "A%c %s, %s, %08x\n", - dir, evts[evt], phys[header[0] >> 30 & 0x3], - header[0]); + fw_notify("A%c %s, %s, %08x\n", + dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]); return; } @@ -400,24 +396,23 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt) switch (tcode) { case 0xe: case 0xa: - printk(KERN_DEBUG "A%c %s, %s\n", - dir, evts[evt], tcodes[tcode]); + fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]); break; case 0x0: case 0x1: case 0x4: case 0x5: case 0x9: - printk(KERN_DEBUG "A%c spd %x tl %02x, " - "%04x -> %04x, %s, " - "%s, %04x%08x%s\n", - dir, speed, header[0] >> 10 & 0x3f, - header[1] >> 16, header[0] >> 16, evts[evt], - tcodes[tcode], header[1] & 0xffff, header[2], specific); + fw_notify("A%c spd %x tl %02x, " + "%04x -> %04x, %s, " + "%s, %04x%08x%s\n", + dir, speed, header[0] >> 10 & 0x3f, + header[1] >> 16, header[0] >> 16, evts[evt], + tcodes[tcode], header[1] & 0xffff, header[2], specific); break; default: - printk(KERN_DEBUG "A%c spd %x tl %02x, " - "%04x -> %04x, %s, " - "%s%s\n", - dir, speed, header[0] >> 10 & 0x3f, - header[1] >> 16, header[0] >> 16, evts[evt], - tcodes[tcode], specific); + fw_notify("A%c spd %x tl %02x, " + "%04x -> %04x, %s, " + "%s%s\n", + dir, speed, header[0] >> 10 & 0x3f, + header[1] >> 16, header[0] >> 16, evts[evt], + tcodes[tcode], specific); } } -- cgit v0.10.2 From ae1e53557911d7e60a637b2400173add958aae94 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 18 Jun 2008 18:20:45 +0200 Subject: firewire: deadline for PHY config transmission If the low-level driver failed to initialize a card properly without noticing it, fw-core was blocked indefinitely when trying to send a PHY config packet. This hung up the events kernel thread, e.g. locked up keyboard input. https://bugzilla.redhat.com/show_bug.cgi?id=444694 https://bugzilla.redhat.com/show_bug.cgi?id=446763 This problem was introduced between 2.6.25 and 2.6.26-rc1 by commit 2a0a2590498be7b92e3e76409c9b8ee722e23c8f "firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)". The solution is to wait with timeout. I tested it with 7 different working controllers and 1 non-working controller. On the working ones, the packet callback complete()s usually --- but not always --- before a timeout of 10ms. Hence I chose a safer timeout of 100ms. On the few tests with the non-working controller ALi M5271, PHY config packet transmission always timed out so far. (Fw-ohci needs to be fixed for this controller independently of this deadline fix. Often the core doesn't even attempt to send a phy config because not even self ID reception works.) Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 7f92c45..03ae8a7 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -297,37 +298,55 @@ EXPORT_SYMBOL(fw_send_request); struct fw_phy_packet { struct fw_packet packet; struct completion done; + struct kref kref; }; -static void -transmit_phy_packet_callback(struct fw_packet *packet, - struct fw_card *card, int status) +static void phy_packet_release(struct kref *kref) +{ + struct fw_phy_packet *p = + container_of(kref, struct fw_phy_packet, kref); + kfree(p); +} + +static void transmit_phy_packet_callback(struct fw_packet *packet, + struct fw_card *card, int status) { struct fw_phy_packet *p = container_of(packet, struct fw_phy_packet, packet); complete(&p->done); + kref_put(&p->kref, phy_packet_release); } void fw_send_phy_config(struct fw_card *card, int node_id, int generation, int gap_count) { - struct fw_phy_packet p; + struct fw_phy_packet *p; + long timeout = DIV_ROUND_UP(HZ, 10); u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) | PHY_CONFIG_ROOT_ID(node_id) | PHY_CONFIG_GAP_COUNT(gap_count); - p.packet.header[0] = data; - p.packet.header[1] = ~data; - p.packet.header_length = 8; - p.packet.payload_length = 0; - p.packet.speed = SCODE_100; - p.packet.generation = generation; - p.packet.callback = transmit_phy_packet_callback; - init_completion(&p.done); - - card->driver->send_request(card, &p.packet); - wait_for_completion(&p.done); + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) + return; + + p->packet.header[0] = data; + p->packet.header[1] = ~data; + p->packet.header_length = 8; + p->packet.payload_length = 0; + p->packet.speed = SCODE_100; + p->packet.generation = generation; + p->packet.callback = transmit_phy_packet_callback; + init_completion(&p->done); + kref_set(&p->kref, 2); + + card->driver->send_request(card, &p->packet); + timeout = wait_for_completion_timeout(&p->done, timeout); + kref_put(&p->kref, phy_packet_release); + + /* will leak p if the callback is never executed */ + WARN_ON(timeout == 0); } void fw_flush_transactions(struct fw_card *card) -- cgit v0.10.2 From a7b64b8704b03c9972b114932fdf517e06153f11 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 14 Jun 2008 14:24:53 +0200 Subject: firewire: Kconfig menu touch-up Emphasize the recommendation to build only one stack. Trim the prompts to better fit into short attention spans. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index fb4d391..76f2671 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,28 +1,26 @@ -comment "An alternative FireWire stack is available with EXPERIMENTAL=y" +comment "A new alternative FireWire stack is available with EXPERIMENTAL=y" depends on EXPERIMENTAL=n +comment "Enable only one of the two stacks, unless you know what you are doing" + depends on EXPERIMENTAL + config FIREWIRE - tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL" + tristate "New FireWire stack, EXPERIMENTAL" depends on EXPERIMENTAL select CRC_ITU_T help This is the "Juju" FireWire stack, a new alternative implementation designed for robustness and simplicity. You can build either this - stack, or the classic stack (the ieee1394 driver, ohci1394 etc.) - or both. Please read http://wiki.linux1394.org/JujuMigration before - you enable the new stack. + stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both. + Please read http://wiki.linux1394.org/JujuMigration before you + enable the new stack. To compile this driver as a module, say M here: the module will be called firewire-core. It functionally replaces ieee1394, raw1394, and video1394. - NOTE: - - You should only build ONE of the stacks, unless you REALLY know what - you are doing. - config FIREWIRE_OHCI - tristate "Support for OHCI FireWire host controllers" + tristate "OHCI-1394 controllers" depends on PCI && FIREWIRE help Enable this driver if you have a FireWire controller based @@ -33,12 +31,12 @@ config FIREWIRE_OHCI called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 stack. - NOTE: + NOTE: - You should only build ohci1394 or firewire-ohci, but not both. - If you nevertheless want to install both, you should configure them - only as modules and blacklist the driver(s) which you don't want to - have auto-loaded. Add either + You should only build either firewire-ohci or the old ohci1394 driver, + but not both. If you nevertheless want to install both, you should + configure them only as modules and blacklist the driver(s) which you + don't want to have auto-loaded. Add either blacklist firewire-ohci or @@ -60,7 +58,7 @@ config FIREWIRE_OHCI_DEBUG default y config FIREWIRE_SBP2 - tristate "Support for storage devices (SBP-2 protocol driver)" + tristate "Storage devices (SBP-2 protocol)" depends on FIREWIRE && SCSI help This option enables you to use SBP-2 devices connected to a -- cgit v0.10.2 From 9499fe2b340d19ef55c349de794db9d917e7403f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 16 Jun 2008 01:39:28 +0200 Subject: ieee1394: Kconfig menu touch-up Rename and reorder some prompts and modify some help texts. The result: -------------------- IEEE 1394 (FireWire) support -------------------- *** Enable only one of the two stacks, unless you know what you are doing *** New FireWire stack, EXPERIMENTAL OHCI-1394 controllers Storage devices (SBP-2 protocol) Stable FireWire stack OHCI-1394 controllers PCILynx controller Storage devices (SBP-2 protocol) Enable replacement for physical DMA in SBP2 IP over 1394 raw1394 userspace interface video1394 userspace interface dv1394 userspace interface (deprecated) Excessive debugging output The old prompts for reference: -------------------- IEEE 1394 (FireWire) support -------------------- IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL Support for OHCI FireWire host controllers Support for storage devices (SBP-2 protocol driver) IEEE 1394 (FireWire) support *** Subsystem Options *** Excessive debugging output *** Controllers *** Texas Instruments PCILynx support OHCI-1394 support *** Protocols *** OHCI-1394 Video support SBP-2 support (Harddisks etc.) Enable replacement for physical DMA in SBP2 IP over 1394 OHCI-DV I/O support (deprecated) Raw IEEE1394 I/O support Signed-off-by: Stefan Richter diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index 545663e..95f45f9 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support" source "drivers/firewire/Kconfig" config IEEE1394 - tristate "IEEE 1394 (FireWire) support" + tristate "Stable FireWire stack" depends on PCI || BROKEN help IEEE 1394 describes a high performance serial bus, which is also @@ -19,30 +19,45 @@ config IEEE1394 To compile this driver as a module, say M here: the module will be called ieee1394. -comment "Subsystem Options" - depends on IEEE1394 - -config IEEE1394_VERBOSEDEBUG - bool "Excessive debugging output" - depends on IEEE1394 +config IEEE1394_OHCI1394 + tristate "OHCI-1394 controllers" + depends on PCI && IEEE1394 help - If you say Y here, you will get very verbose debugging logs from - the subsystem which includes a dump of the header of every sent - and received packet. This can amount to a high amount of data - collected in a very short time which is usually also saved to - disk by the system logging daemons. + Enable this driver if you have an IEEE 1394 controller based on the + OHCI-1394 specification. The current driver is only tested with OHCI + chipsets made by Texas Instruments and NEC. Most third-party vendors + use one of these chipsets. It should work with any OHCI-1394 + compliant card, however. - Say Y if you really want or need the debugging output, everyone - else says N. + To compile this driver as a module, say M here: the + module will be called ohci1394. -comment "Controllers" - depends on IEEE1394 + NOTE: -comment "Texas Instruments PCILynx requires I2C" + You should only build either ohci1394 or the new firewire-ohci driver, + but not both. If you nevertheless want to install both, you should + configure them only as modules and blacklist the driver(s) which you + don't want to have auto-loaded. Add either + + blacklist firewire-ohci + or + blacklist ohci1394 + blacklist video1394 + blacklist dv1394 + + to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf + depending on your distribution. The latter two modules should be + blacklisted together with ohci1394 because they depend on ohci1394. + + If you have an old modprobe which doesn't implement the blacklist + directive, use "install modulename /bin/true" for the modules to be + blacklisted. + +comment "PCILynx controller requires I2C" depends on IEEE1394 && I2C=n config IEEE1394_PCILYNX - tristate "Texas Instruments PCILynx support" + tristate "PCILynx controller" depends on PCI && IEEE1394 && I2C select I2C_ALGOBIT help @@ -57,35 +72,11 @@ config IEEE1394_PCILYNX PowerMacs G3 B&W contain the PCILynx controller. Therefore almost everybody can say N here. -config IEEE1394_OHCI1394 - tristate "OHCI-1394 support" - depends on PCI && IEEE1394 - help - Enable this driver if you have an IEEE 1394 controller based on the - OHCI-1394 specification. The current driver is only tested with OHCI - chipsets made by Texas Instruments and NEC. Most third-party vendors - use one of these chipsets. It should work with any OHCI-1394 - compliant card, however. - - To compile this driver as a module, say M here: the - module will be called ohci1394. - -comment "Protocols" - depends on IEEE1394 - -config IEEE1394_VIDEO1394 - tristate "OHCI-1394 Video support" - depends on IEEE1394 && IEEE1394_OHCI1394 - help - This option enables video device usage for OHCI-1394 cards. Enable - this option only if you have an IEEE 1394 video device connected to - an OHCI-1394 card. - comment "SBP-2 support (for storage devices) requires SCSI" depends on IEEE1394 && SCSI=n config IEEE1394_SBP2 - tristate "SBP-2 support (Harddisks etc.)" + tristate "Storage devices (SBP-2 protocol)" depends on IEEE1394 && SCSI help This option enables you to use SBP-2 devices connected to an IEEE @@ -127,24 +118,47 @@ config IEEE1394_ETH1394 The module is called eth1394 although it does not emulate Ethernet. +config IEEE1394_RAWIO + tristate "raw1394 userspace interface" + depends on IEEE1394 + help + This option adds support for the raw1394 device file which enables + direct communication of user programs with IEEE 1394 devices + (isochronous and asynchronous). Almost all application programs + which access FireWire require this option. + + To compile this driver as a module, say M here: the module will be + called raw1394. + +config IEEE1394_VIDEO1394 + tristate "video1394 userspace interface" + depends on IEEE1394 && IEEE1394_OHCI1394 + help + This option adds support for the video1394 device files which enable + isochronous communication of user programs with IEEE 1394 devices, + especially video capture or export. This interface is used by all + libdc1394 based programs and by several other programs, in addition to + the raw1394 interface. It is generally not required for DV capture. + + To compile this driver as a module, say M here: the module will be + called video1394. + config IEEE1394_DV1394 - tristate "OHCI-DV I/O support (deprecated)" + tristate "dv1394 userspace interface (deprecated)" depends on IEEE1394 && IEEE1394_OHCI1394 help The dv1394 driver is unsupported and may be removed from Linux in a future release. Its functionality is now provided by raw1394 together with libraries such as libiec61883. -config IEEE1394_RAWIO - tristate "Raw IEEE1394 I/O support" +config IEEE1394_VERBOSEDEBUG + bool "Excessive debugging output" depends on IEEE1394 help - This option adds support for the raw1394 device file which enables - direct communication of user programs with the IEEE 1394 bus and thus - with the attached peripherals. Almost all application programs which - access FireWire require this option. + If you say Y here, you will get very verbose debugging logs from the + ieee1394 drivers, including sent and received packet headers. This + will quickly result in large amounts of data sent to the system log. - To compile this driver as a module, say M here: the module will be - called raw1394. + Say Y if you really need the debugging output. Everyone else says N. endmenu -- cgit v0.10.2 From fb77bcef9f7be78e3e11543cb5abbcb1b1fac53e Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 18 Jun 2008 15:36:38 -0700 Subject: IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler() Commit 1ae5c187 ("IB/uverbs: Don't store struct file * for event files") changed the way that closed files are handled in the uverbs code. However, after the conversion, is_closed flag is checked incorrectly in ib_uverbs_async_handler(). As a result, no async events are ever passed to applications. Found by: Ronni Zimmerman Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index f806da1..caed42b 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -423,7 +423,7 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, unsigned long flags; spin_lock_irqsave(&file->async_file->lock, flags); - if (!file->async_file->is_closed) { + if (file->async_file->is_closed) { spin_unlock_irqrestore(&file->async_file->lock, flags); return; } -- cgit v0.10.2 From dcd981a77b2b35d169656d4b9cee208096ed7ccf Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 19 Jun 2008 09:52:26 +1000 Subject: agp/via: fixup pci ids add a new PCI ID and remove an old dodgy one, include the explaination in the commented code so nobody readds later. (davej also sent the pci id addition). Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c index 0ecc54d..7b36476 100644 --- a/drivers/char/agp/via-agp.c +++ b/drivers/char/agp/via-agp.c @@ -389,11 +389,20 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata = .device_id = PCI_DEVICE_ID_VIA_VT3324, .chipset_name = "CX700", }, - /* VT3336 */ + /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique + * architecture, the AGP resource and behavior are different from + * the traditional AGP which resides only in chipset. AGP is used + * by 3D driver which wasn't available for the VT3336 and VT3364 + * generation until now. Unfortunately, by testing, VT3364 works + * but VT3336 doesn't. - explaination from via, just leave this as + * as a placeholder to avoid future patches adding it back in. + */ +#if 0 { .device_id = PCI_DEVICE_ID_VIA_VT3336, .chipset_name = "VT3336", }, +#endif /* P4M890 */ { .device_id = PCI_DEVICE_ID_VIA_P4M890, @@ -546,8 +555,8 @@ static const struct pci_device_id agp_via_pci_table[] = { ID(PCI_DEVICE_ID_VIA_3296_0), ID(PCI_DEVICE_ID_VIA_P4M800CE), ID(PCI_DEVICE_ID_VIA_VT3324), - ID(PCI_DEVICE_ID_VIA_VT3336), ID(PCI_DEVICE_ID_VIA_P4M890), + ID(PCI_DEVICE_ID_VIA_VT3364), { } }; -- cgit v0.10.2 From da503fa60b84d5945deb3ab74efdd0bec61df4a1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 18 Jun 2008 09:28:00 +0100 Subject: agp: two-stage page destruction issue besides it apparently being useful only in 2.6.24 (the changes in 2.6.25 really mean that it could be converted back to a single-stage mechanism), I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling of gart_to_virt() in the second stage invocations of the destroy function. I think that besides this being a real issue with Xen (where unmap_page_from_agp() is not just a page table attribute change), this also is invalid from a theoretical perspective: One should not assume that gart_to_virt() is still valid after unmapping a page. So minimally (keeping the 2-stage mechanism) a patch like the one below would be needed. Jan Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index b1bdd01..1ec8710 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -188,10 +188,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } if (got_gatt) bridge->driver->free_gatt_table(bridge); @@ -215,10 +215,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } } diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 7fc0c99..b6650a6 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -202,10 +202,13 @@ void agp_free_memory(struct agp_memory *curr) } if (curr->page_count != 0) { for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP); + curr->memory[i] = (unsigned long)gart_to_virt(curr->memory[i]); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_UNMAP); } for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_FREE); } } agp_free_key(curr->key); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index eeea50a..01b0340 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -418,9 +418,11 @@ static void intel_i810_free_by_type(struct agp_memory *curr) if (curr->page_count == 4) i8xx_destroy_pages(gart_to_virt(curr->memory[0])); else { - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + void *va = gart_to_virt(curr->memory[0]); + + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } agp_free_page_array(curr); -- cgit v0.10.2 From c72580129209aaa509ace81c1f2ee1caa9c9774b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 26 Mar 2008 14:10:02 -0700 Subject: drivers/char/agp - use bool Use boolean in AGP instead of having own TRUE/FALSE -- Signed-off-by: Joe Perches Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 99e6a40..81e14be 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -99,8 +99,8 @@ struct agp_bridge_driver { const void *aperture_sizes; int num_aperture_sizes; enum aper_size_type size_type; - int cant_use_aperture; - int needs_scratch_page; + bool cant_use_aperture; + bool needs_scratch_page; const struct gatt_mask *masks; int (*fetch_size)(void); int (*configure)(void); @@ -278,7 +278,7 @@ void agp_generic_destroy_page(void *addr, int flags); void agp_free_key(int key); int agp_num_entries(void); u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 mode, u32 command); -void agp_device_command(u32 command, int agp_v3); +void agp_device_command(u32 command, bool agp_v3); int agp_3_5_enable(struct agp_bridge_data *bridge); void global_cache_flush(void); void get_agp_version(struct agp_bridge_data *bridge); diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index e77c178..5da89f6 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -80,7 +80,7 @@ static void alpha_core_agp_enable(struct agp_bridge_data *bridge, u32 mode) agp->mode.bits.enable = 1; agp->ops->configure(agp); - agp_device_command(agp->mode.lw, 0); + agp_device_command(agp->mode.lw, false); } static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start, @@ -126,7 +126,7 @@ struct agp_bridge_driver alpha_core_agp_driver = { .aperture_sizes = alpha_core_agp_sizes, .num_aperture_sizes = 1, .size_type = FIXED_APER_SIZE, - .cant_use_aperture = 1, + .cant_use_aperture = true, .masks = NULL, .fetch_size = alpha_core_agp_fetch_size, diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index 96bdb92..39a0718 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -314,9 +314,9 @@ static int amd_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index d8200ac..13665db 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -90,9 +90,9 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 07b4d8f..3a4566c 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -287,10 +287,10 @@ static int ati_insert_memory(struct agp_memory * mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { /*CACHE_FLUSH(); */ global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c index cac0009..8ca6f26 100644 --- a/drivers/char/agp/efficeon-agp.c +++ b/drivers/char/agp/efficeon-agp.c @@ -249,9 +249,9 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t if (type != 0 || mem->type != 0) return -EINVAL; - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } last_page = NULL; @@ -329,7 +329,7 @@ static const struct agp_bridge_driver efficeon_driver = { .free_gatt_table = efficeon_free_gatt_table, .insert_memory = efficeon_insert_memory, .remove_memory = efficeon_remove_memory, - .cant_use_aperture = 0, // 1 might be faster? + .cant_use_aperture = false, // true might be faster? // Generic .alloc_by_type = agp_generic_alloc_by_type, diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index b6650a6..3e3625a 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -188,7 +188,7 @@ void agp_free_memory(struct agp_memory *curr) if (curr == NULL) return; - if (curr->is_bound == TRUE) + if (curr->is_bound) agp_unbind_memory(curr); if (curr->type >= AGP_USER_TYPES) { @@ -414,20 +414,20 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start) if (curr == NULL) return -EINVAL; - if (curr->is_bound == TRUE) { + if (curr->is_bound) { printk(KERN_INFO PFX "memory %p is already bound!\n", curr); return -EINVAL; } - if (curr->is_flushed == FALSE) { + if (!curr->is_flushed) { curr->bridge->driver->cache_flush(); - curr->is_flushed = TRUE; + curr->is_flushed = true; } ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type); if (ret_val != 0) return ret_val; - curr->is_bound = TRUE; + curr->is_bound = true; curr->pg_start = pg_start; return 0; } @@ -449,7 +449,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (curr == NULL) return -EINVAL; - if (curr->is_bound != TRUE) { + if (!curr->is_bound) { printk(KERN_INFO PFX "memory %p was not bound!\n", curr); return -EINVAL; } @@ -459,7 +459,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (ret_val != 0) return ret_val; - curr->is_bound = FALSE; + curr->is_bound = false; curr->pg_start = 0; return 0; } @@ -757,7 +757,7 @@ u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode EXPORT_SYMBOL(agp_collect_device_status); -void agp_device_command(u32 bridge_agpstat, int agp_v3) +void agp_device_command(u32 bridge_agpstat, bool agp_v3) { struct pci_dev *device = NULL; int mode; @@ -821,7 +821,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) /* If we have 3.5, we can do the isoch stuff. */ if (bridge->minor_version >= 5) agp_3_5_enable(bridge); - agp_device_command(bridge_agpstat, TRUE); + agp_device_command(bridge_agpstat, true); return; } else { /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/ @@ -838,7 +838,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) } /* AGP v<3 */ - agp_device_command(bridge_agpstat, FALSE); + agp_device_command(bridge_agpstat, false); } EXPORT_SYMBOL(agp_generic_enable); @@ -1086,9 +1086,9 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index cbb0444..80d7317 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -353,9 +353,9 @@ hp_zx1_insert_memory (struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -437,7 +437,7 @@ const struct agp_bridge_driver hp_zx1_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index 76f581c..e587eeb 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -580,7 +580,7 @@ const struct agp_bridge_driver intel_i460_driver = { .alloc_by_type = agp_generic_alloc_by_type, .free_by_type = agp_generic_free_by_type, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __devinit agp_intel_i460_probe(struct pci_dev *pdev, diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 01b0340..6800b7e 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1658,7 +1658,7 @@ static const struct agp_bridge_driver intel_810_driver = { .aperture_sizes = intel_i810_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 2, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i810_configure, .fetch_size = intel_i810_fetch_size, .cleanup = intel_i810_cleanup, @@ -1707,7 +1707,7 @@ static const struct agp_bridge_driver intel_830_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i830_configure, .fetch_size = intel_i830_fetch_size, .cleanup = intel_i830_cleanup, @@ -1878,7 +1878,7 @@ static const struct agp_bridge_driver intel_915_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, @@ -1904,7 +1904,7 @@ static const struct agp_bridge_driver intel_i965_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, @@ -1954,7 +1954,7 @@ static const struct agp_bridge_driver intel_g33_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c index 225ed2a..eaceb61 100644 --- a/drivers/char/agp/nvidia-agp.c +++ b/drivers/char/agp/nvidia-agp.c @@ -214,9 +214,9 @@ static int nvidia_insert_memory(struct agp_memory *mem, off_t pg_start, int type return -EBUSY; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { writel(agp_bridge->driver->mask_memory(agp_bridge, diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c index 2939e35..8c42dcc 100644 --- a/drivers/char/agp/parisc-agp.c +++ b/drivers/char/agp/parisc-agp.c @@ -141,9 +141,9 @@ parisc_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -226,7 +226,7 @@ static const struct agp_bridge_driver parisc_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index 98cf8ab..b972d83 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -182,9 +182,9 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -264,8 +264,8 @@ const struct agp_bridge_driver sgi_tioca_driver = { .agp_alloc_page = sgi_tioca_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 0, + .cant_use_aperture = true, + .needs_scratch_page = false, .num_aperture_sizes = 1, }; diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index e08934e..0e054c1 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -339,9 +339,9 @@ static int serverworks_insert_memory(struct agp_memory *mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -412,7 +412,7 @@ static void serverworks_agp_enable(struct agp_bridge_data *bridge, u32 mode) bridge->capndx + PCI_AGP_COMMAND, command); - agp_device_command(command, 0); + agp_device_command(command, false); } static const struct agp_bridge_driver sworks_driver = { diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 42c0a60..d2fa3cf 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -281,10 +281,10 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode) if (uninorth_rev >= 0x30) { /* This is an AGP V3 */ - agp_device_command(command, (status & AGPSTAT_MODE_3_0)); + agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0); } else { /* AGP V2 */ - agp_device_command(command, 0); + agp_device_command(command, false); } uninorth_tlbflush(NULL); @@ -511,7 +511,7 @@ const struct agp_bridge_driver uninorth_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; const struct agp_bridge_driver u3_agp_driver = { @@ -536,8 +536,8 @@ const struct agp_bridge_driver u3_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 1, + .cant_use_aperture = true, + .needs_scratch_page = true, }; static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = { diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 661d90d..09b4478 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -30,14 +30,6 @@ #ifndef _AGP_BACKEND_H #define _AGP_BACKEND_H 1 -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - enum chipset_type { NOT_SUPPORTED, SUPPORTED, @@ -57,7 +49,7 @@ struct agp_kern_info { size_t aper_size; int max_memory; /* In pages */ int current_memory; - int cant_use_aperture; + bool cant_use_aperture; unsigned long page_mask; struct vm_operations_struct *vm_ops; }; @@ -83,8 +75,8 @@ struct agp_memory { off_t pg_start; u32 type; u32 physical; - u8 is_bound; - u8 is_flushed; + bool is_bound; + bool is_flushed; u8 vmalloc_flag; }; -- cgit v0.10.2 From d799e083a80b220f3681d7790f11e77d1704022b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:46:30 +0900 Subject: ahci: jmb361 has only one port JMB361 has only one port but reports it has two causing longish probe failure on the second one. Quirk it. Reported by Gajo Petrovic in bz 10911. Signed-off-by: Tejun Heo Cc: Gajo Petrovic Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 966ab40..29f34d0 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -653,6 +653,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_PMP; } + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && + port_map != 1) { + dev_printk(KERN_INFO, &pdev->dev, + "JMB361 has only one port, port_map 0x%x -> 0x%x\n", + port_map, 1); + port_map = 1; + } + /* * Temporary Marvell 6145 hack: PATA port presence * is asserted through the standard AHCI port -- cgit v0.10.2 From 5895ef9a5b746e7cc9ebda50c87fbd11562da0a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:36:26 +0900 Subject: libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index cc816ca..303fc0d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) } /** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported + * atapi_check_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * * Allow low-level driver to filter ATA PACKET commands, returning @@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) +int atapi_check_dma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2e6e162..57a4364 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; - int using_pio = (dev->flags & ATA_DFLAG_PIO); int nodata = (scmd->sc_data_direction == DMA_NONE); + int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); unsigned int nbytes; memset(qc->cdb, 0, dev->cdb_len); @@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) ata_qc_set_pc_nbytes(qc); /* check whether ATAPI DMA is safe */ - if (!using_pio && ata_check_atapi_dma(qc)) + if (!nodata && !using_pio && atapi_check_dma(qc)) using_pio = 1; /* Some controller variants snoop this value for Packet @@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) qc->tf.lbam = (nbytes & 0xFF); qc->tf.lbah = (nbytes >> 8); - if (using_pio || nodata) { - /* no data, or PIO data xfer */ - if (nodata) - qc->tf.protocol = ATAPI_PROT_NODATA; - else - qc->tf.protocol = ATAPI_PROT_PIO; - } else { + if (nodata) + qc->tf.protocol = ATAPI_PROT_NODATA; + else if (using_pio) + qc->tf.protocol = ATAPI_PROT_PIO; + else { /* DMA data xfer */ qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 4514283..1cf803a 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); +extern int atapi_check_dma(struct ata_queued_cmd *qc); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); extern void ata_dev_init(struct ata_device *dev); extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); -- cgit v0.10.2 From 3bd0a70ee9cc30ae81b39cb5ecad0fa7bcb4675b Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:11:16 -0400 Subject: sata_mv: enable async_notify for 60x1 Rev.C0 and higher The early chipsets cannot safely handle Async Notification (AN), but 6041/6081 chip revision "C0" (and newer) can handle it. So allow AN for "C0" and higher. This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 60391e9..75fde48 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap) goto out_port_free_dma_mem; memset(pp->crpb, 0, MV_CRPB_Q_SZ); + /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) + ap->flags |= ATA_FLAG_AN; /* * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl. * For later hardware, we need one unique sg_tbl per NCQ tag. -- cgit v0.10.2 From c6112bd86bc8f727bb732a47f2133e0ff12beda9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:13:02 -0400 Subject: sata_mv: warn on PIO with multiple DRQs Chip errata sometimes prevents reliable use of PIO commands which involve more than a single DRQ (data request). In normal operation, libata should not generate such PIO commands (uses DMA instead), but they could be sent in via SG_IO from userspace. A full workaround might be to break up such commands into sequences of single DRQ ones, but that's just way too complex for something that doesn't normally happen in real life. So, allow the attempt (it often works, despite the errata), but log the event for reference when somebody screams. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 75fde48..28092bc 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1595,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) if ((qc->tf.protocol != ATA_PROT_DMA) && (qc->tf.protocol != ATA_PROT_NCQ)) { + static int limit_warnings = 10; + /* + * Errata SATA#16, SATA#24: warn if multiple DRQs expected. + * + * Someday, we might implement special polling workarounds + * for these, but it all seems rather unnecessary since we + * normally use only DMA for commands which transfer more + * than a single block of data. + * + * Much of the time, this could just work regardless. + * So for now, just log the incident, and allow the attempt. + */ + if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + --limit_warnings; + ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME + ": attempting PIO w/multiple DRQ: " + "this may fail due to h/w errata\n"); + } /* * We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing -- cgit v0.10.2 From cc18e0fea7907e7a96b7df71b81838d518bc074e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 16 Jun 2008 12:16:26 +0100 Subject: LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver Add HAVE_PATA_PLATFORM to select the pata platform driver to ensure that we do not end up with a long 'depends on' list when other users of this driver turn up. Signed-off-by: Ben Dooks Signed-off-by: Jeff Garzik diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9bf2986..ae84949 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -651,9 +651,17 @@ config PATA_WINBOND_VLB Support for the Winbond W83759A controller on Vesa Local Bus systems. +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || ARCH_RPC || PPC + depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. -- cgit v0.10.2 From 040dee53a724f54d47876674d50184873364f207 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 13 Jun 2008 18:05:02 +0900 Subject: ata_piix: add TECRA M4 to broken suspend list TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 81b7ae3..a90ae03 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1043,6 +1043,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"), + }, + }, + { .ident = "TECRA M5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), -- cgit v0.10.2 From 9516b030b484fc99cf24213caf88df01f99248dd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 10:42:17 +1000 Subject: agp: more boolean conversions. Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c index 3927579..58c57cb 100644 --- a/drivers/char/agp/compat_ioctl.c +++ b/drivers/char/agp/compat_ioctl.c @@ -214,7 +214,7 @@ long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE32)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 857b262..e6cb1ab 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -395,7 +395,7 @@ static int agp_remove_controller(struct agp_controller *controller) if (agp_fe.current_controller == controller) { agp_fe.current_controller = NULL; - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); } kfree(controller); @@ -443,7 +443,7 @@ static void agp_controller_release_current(struct agp_controller *controller, } agp_fe.current_controller = NULL; - agp_fe.used_by_controller = FALSE; + agp_fe.used_by_controller = false; agp_backend_release(agp_bridge); } @@ -573,7 +573,7 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma) mutex_lock(&(agp_fe.agp_mutex)); - if (agp_fe.backend_acquired != TRUE) + if (agp_fe.backend_acquired != true) goto out_eperm; if (!(test_bit(AGP_FF_IS_VALID, &priv->access_flags))) @@ -768,7 +768,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) atomic_inc(&agp_bridge->agp_in_use); - agp_fe.backend_acquired = TRUE; + agp_fe.backend_acquired = true; controller = agp_find_controller_by_pid(priv->my_pid); @@ -778,7 +778,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) controller = agp_create_controller(priv->my_pid); if (controller == NULL) { - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); return -ENOMEM; } @@ -981,7 +981,7 @@ static long agp_ioctl(struct file *file, ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 3e3625a..564daaa 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -96,13 +96,13 @@ EXPORT_SYMBOL(agp_flush_chipset); void agp_alloc_page_array(size_t size, struct agp_memory *mem) { mem->memory = NULL; - mem->vmalloc_flag = 0; + mem->vmalloc_flag = false; if (size <= 2*PAGE_SIZE) mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY); if (mem->memory == NULL) { mem->memory = vmalloc(size); - mem->vmalloc_flag = 1; + mem->vmalloc_flag = true; } } EXPORT_SYMBOL(agp_alloc_page_array); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 6800b7e..0235659 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -325,7 +325,7 @@ static int intel_i810_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -795,7 +795,7 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -1022,7 +1022,7 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 09b4478..972b12b 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -77,7 +77,7 @@ struct agp_memory { u32 physical; bool is_bound; bool is_flushed; - u8 vmalloc_flag; + bool vmalloc_flag; }; #define AGP_NORMAL_MEMORY 0 diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h index 62aef58..c8fdb6e 100644 --- a/include/linux/agpgart.h +++ b/include/linux/agpgart.h @@ -206,8 +206,8 @@ struct agp_front_data { struct agp_controller *current_controller; struct agp_controller *controllers; struct agp_file_private *file_priv_list; - u8 used_by_controller; - u8 backend_acquired; + bool used_by_controller; + bool backend_acquired; }; #endif /* __KERNEL__ */ -- cgit v0.10.2 From 9a3b103c27a7e3199b917bc3ca219530132afdfc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 18 Jun 2008 20:56:58 -0400 Subject: ahci: sis can't do PMP From: Piter PUNK SiS AHCIs say they can do PMP but can't and fail detection if SRST w/ pmp==15 is used. Turn off PMP support. tj: added patch description, adapted patch to #upstream-fixes and renamed board_ahci_sis to board_ahci_nopmp. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 29f34d0..6a4a2a2 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -90,6 +90,7 @@ enum { board_ahci_mv = 4, board_ahci_sb700 = 5, board_ahci_mcp65 = 6, + board_ahci_nopmp = 7, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -401,6 +402,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_nopmp */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -525,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ - { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */ + { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */ /* Marvell */ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ -- cgit v0.10.2 From 7ec700fcaf4f01ae72956df74a9e0d08938fd26e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 11:27:23 +1000 Subject: drm: pcigart use proper pci map interfaces. Switch to using more correct pci dma mapping interfaces. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c index b710426..c533d0c 100644 --- a/drivers/char/drm/ati_pcigart.c +++ b/drivers/char/drm/ati_pcigart.c @@ -76,7 +76,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info for (i = 0; i < pages; i++) { if (!entry->busaddr[i]) break; - pci_unmap_single(dev->pdev, entry->busaddr[i], + pci_unmap_page(dev->pdev, entry->busaddr[i], PAGE_SIZE, PCI_DMA_TODEVICE); } @@ -137,10 +137,8 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga for (i = 0; i < pages; i++) { /* we need to support large memory configurations */ - entry->busaddr[i] = pci_map_single(dev->pdev, - page_address(entry-> - pagelist[i]), - PAGE_SIZE, PCI_DMA_TODEVICE); + entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i], + 0, PAGE_SIZE, PCI_DMA_TODEVICE); if (entry->busaddr[i] == 0) { DRM_ERROR("unable to map PCIGART pages!\n"); drm_ati_pcigart_cleanup(dev, gart_info); -- cgit v0.10.2 From 9f18409ea3d778a171a9505c0a849d846f352bd0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:21:25 +1000 Subject: radeon: add production microcode from AMD This adds production microcode for r100->r500 from AMD. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index f6f6c92..d8ede40 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -34,788 +34,12 @@ #include "radeon_drv.h" #include "r300_reg.h" +#include "radeon_microcode.h" + #define RADEON_FIFO_DEBUG 0 static int radeon_do_cleanup_cp(struct drm_device * dev); -/* CP microcode (from ATI) */ -static const u32 R200_cp_microcode[][2] = { - {0x21007000, 0000000000}, - {0x20007000, 0000000000}, - {0x000000ab, 0x00000004}, - {0x000000af, 0x00000004}, - {0x66544a49, 0000000000}, - {0x49494174, 0000000000}, - {0x54517d83, 0000000000}, - {0x498d8b64, 0000000000}, - {0x49494949, 0000000000}, - {0x49da493c, 0000000000}, - {0x49989898, 0000000000}, - {0xd34949d5, 0000000000}, - {0x9dc90e11, 0000000000}, - {0xce9b9b9b, 0000000000}, - {0x000f0000, 0x00000016}, - {0x352e232c, 0000000000}, - {0x00000013, 0x00000004}, - {0x000f0000, 0x00000016}, - {0x352e272c, 0000000000}, - {0x000f0001, 0x00000016}, - {0x3239362f, 0000000000}, - {0x000077ef, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00000016, 0x00000004}, - {0x0003802a, 0x00000002}, - {0x040067e0, 0x00000002}, - {0x00000016, 0x00000004}, - {0x000077e0, 0x00000002}, - {0x00065000, 0x00000002}, - {0x000037e1, 0x00000002}, - {0x040067e1, 0x00000006}, - {0x000077e0, 0x00000002}, - {0x000077e1, 0x00000002}, - {0x000077e1, 0x00000006}, - {0xffffffff, 0000000000}, - {0x10000000, 0000000000}, - {0x0003802a, 0x00000002}, - {0x040067e0, 0x00000006}, - {0x00007675, 0x00000002}, - {0x00007676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0003802b, 0x00000002}, - {0x04002676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0000002e, 0x00000018}, - {0x0000002e, 0x00000018}, - {0000000000, 0x00000006}, - {0x0000002f, 0x00000018}, - {0x0000002f, 0x00000018}, - {0000000000, 0x00000006}, - {0x01605000, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00098000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x64c0603d, 0x00000004}, - {0x00080000, 0x00000016}, - {0000000000, 0000000000}, - {0x0400251d, 0x00000002}, - {0x00007580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x04002580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x00000046, 0x00000004}, - {0x00005000, 0000000000}, - {0x00061000, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x00019000, 0x00000002}, - {0x00011055, 0x00000014}, - {0x00000055, 0x00000012}, - {0x0400250f, 0x00000002}, - {0x0000504a, 0x00000004}, - {0x00007565, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000051, 0x00000004}, - {0x01e655b4, 0x00000002}, - {0x4401b0dc, 0x00000002}, - {0x01c110dc, 0x00000002}, - {0x2666705d, 0x00000018}, - {0x040c2565, 0x00000002}, - {0x0000005d, 0x00000018}, - {0x04002564, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000054, 0x00000004}, - {0x00401060, 0x00000008}, - {0x00101000, 0x00000002}, - {0x000d80ff, 0x00000002}, - {0x00800063, 0x00000008}, - {0x000f9000, 0x00000002}, - {0x000e00ff, 0x00000002}, - {0000000000, 0x00000006}, - {0x00000080, 0x00000018}, - {0x00000054, 0x00000004}, - {0x00007576, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00009000, 0x00000002}, - {0x00041000, 0x00000002}, - {0x0c00350e, 0x00000002}, - {0x00049000, 0x00000002}, - {0x00051000, 0x00000002}, - {0x01e785f8, 0x00000002}, - {0x00200000, 0x00000002}, - {0x00600073, 0x0000000c}, - {0x00007563, 0x00000002}, - {0x006075f0, 0x00000021}, - {0x20007068, 0x00000004}, - {0x00005068, 0x00000004}, - {0x00007576, 0x00000002}, - {0x00007577, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x0000750f, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00600076, 0x0000000c}, - {0x006075f0, 0x00000021}, - {0x000075f8, 0x00000002}, - {0x00000076, 0x00000004}, - {0x000a750e, 0x00000002}, - {0x0020750f, 0x00000002}, - {0x00600079, 0x00000004}, - {0x00007570, 0x00000002}, - {0x00007571, 0x00000002}, - {0x00007572, 0x00000006}, - {0x00005000, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00007568, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000084, 0x0000000c}, - {0x00058000, 0x00000002}, - {0x0c607562, 0x00000002}, - {0x00000086, 0x00000004}, - {0x00600085, 0x00000004}, - {0x400070dd, 0000000000}, - {0x000380dd, 0x00000002}, - {0x00000093, 0x0000001c}, - {0x00065095, 0x00000018}, - {0x040025bb, 0x00000002}, - {0x00061096, 0x00000018}, - {0x040075bc, 0000000000}, - {0x000075bb, 0x00000002}, - {0x000075bc, 0000000000}, - {0x00090000, 0x00000006}, - {0x00090000, 0x00000002}, - {0x000d8002, 0x00000006}, - {0x00005000, 0x00000002}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x01665000, 0x00000002}, - {0x000a0000, 0x00000002}, - {0x000671cc, 0x00000002}, - {0x0286f1cd, 0x00000002}, - {0x000000a3, 0x00000010}, - {0x21007000, 0000000000}, - {0x000000aa, 0x0000001c}, - {0x00065000, 0x00000002}, - {0x000a0000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x000b0000, 0x00000002}, - {0x38067000, 0x00000002}, - {0x000a00a6, 0x00000004}, - {0x20007000, 0000000000}, - {0x01200000, 0x00000002}, - {0x20077000, 0x00000002}, - {0x01200000, 0x00000002}, - {0x20007000, 0000000000}, - {0x00061000, 0x00000002}, - {0x0120751b, 0x00000002}, - {0x8040750a, 0x00000002}, - {0x8040750b, 0x00000002}, - {0x00110000, 0x00000002}, - {0x000380dd, 0x00000002}, - {0x000000bd, 0x0000001c}, - {0x00061096, 0x00000018}, - {0x844075bd, 0x00000002}, - {0x00061095, 0x00000018}, - {0x840075bb, 0x00000002}, - {0x00061096, 0x00000018}, - {0x844075bc, 0x00000002}, - {0x000000c0, 0x00000004}, - {0x804075bd, 0x00000002}, - {0x800075bb, 0x00000002}, - {0x804075bc, 0x00000002}, - {0x00108000, 0x00000002}, - {0x01400000, 0x00000002}, - {0x006000c4, 0x0000000c}, - {0x20c07000, 0x00000020}, - {0x000000c6, 0x00000012}, - {0x00800000, 0x00000006}, - {0x0080751d, 0x00000006}, - {0x000025bb, 0x00000002}, - {0x000040c0, 0x00000004}, - {0x0000775c, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460275d, 0x00000020}, - {0x00004000, 0000000000}, - {0x00007999, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460299b, 0x00000020}, - {0x00004000, 0000000000}, - {0x01e00830, 0x00000002}, - {0x21007000, 0000000000}, - {0x00005000, 0x00000002}, - {0x00038042, 0x00000002}, - {0x040025e0, 0x00000002}, - {0x000075e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000380d9, 0x00000002}, - {0x04007394, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - -static const u32 radeon_cp_microcode[][2] = { - {0x21007000, 0000000000}, - {0x20007000, 0000000000}, - {0x000000b4, 0x00000004}, - {0x000000b8, 0x00000004}, - {0x6f5b4d4c, 0000000000}, - {0x4c4c427f, 0000000000}, - {0x5b568a92, 0000000000}, - {0x4ca09c6d, 0000000000}, - {0xad4c4c4c, 0000000000}, - {0x4ce1af3d, 0000000000}, - {0xd8afafaf, 0000000000}, - {0xd64c4cdc, 0000000000}, - {0x4cd10d10, 0000000000}, - {0x000f0000, 0x00000016}, - {0x362f242d, 0000000000}, - {0x00000012, 0x00000004}, - {0x000f0000, 0x00000016}, - {0x362f282d, 0000000000}, - {0x000380e7, 0x00000002}, - {0x04002c97, 0x00000002}, - {0x000f0001, 0x00000016}, - {0x333a3730, 0000000000}, - {0x000077ef, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00000017, 0x00000004}, - {0x0003802b, 0x00000002}, - {0x040067e0, 0x00000002}, - {0x00000017, 0x00000004}, - {0x000077e0, 0x00000002}, - {0x00065000, 0x00000002}, - {0x000037e1, 0x00000002}, - {0x040067e1, 0x00000006}, - {0x000077e0, 0x00000002}, - {0x000077e1, 0x00000002}, - {0x000077e1, 0x00000006}, - {0xffffffff, 0000000000}, - {0x10000000, 0000000000}, - {0x0003802b, 0x00000002}, - {0x040067e0, 0x00000006}, - {0x00007675, 0x00000002}, - {0x00007676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0003802c, 0x00000002}, - {0x04002676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0000002f, 0x00000018}, - {0x0000002f, 0x00000018}, - {0000000000, 0x00000006}, - {0x00000030, 0x00000018}, - {0x00000030, 0x00000018}, - {0000000000, 0x00000006}, - {0x01605000, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00098000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x64c0603e, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00080000, 0x00000016}, - {0000000000, 0000000000}, - {0x0400251d, 0x00000002}, - {0x00007580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x04002580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x00000049, 0x00000004}, - {0x00005000, 0000000000}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00061000, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x00019000, 0x00000002}, - {0x00011055, 0x00000014}, - {0x00000055, 0x00000012}, - {0x0400250f, 0x00000002}, - {0x0000504f, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007565, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000058, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x01e655b4, 0x00000002}, - {0x4401b0e4, 0x00000002}, - {0x01c110e4, 0x00000002}, - {0x26667066, 0x00000018}, - {0x040c2565, 0x00000002}, - {0x00000066, 0x00000018}, - {0x04002564, 0x00000002}, - {0x00007566, 0x00000002}, - {0x0000005d, 0x00000004}, - {0x00401069, 0x00000008}, - {0x00101000, 0x00000002}, - {0x000d80ff, 0x00000002}, - {0x0080006c, 0x00000008}, - {0x000f9000, 0x00000002}, - {0x000e00ff, 0x00000002}, - {0000000000, 0x00000006}, - {0x0000008f, 0x00000018}, - {0x0000005b, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007576, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00009000, 0x00000002}, - {0x00041000, 0x00000002}, - {0x0c00350e, 0x00000002}, - {0x00049000, 0x00000002}, - {0x00051000, 0x00000002}, - {0x01e785f8, 0x00000002}, - {0x00200000, 0x00000002}, - {0x0060007e, 0x0000000c}, - {0x00007563, 0x00000002}, - {0x006075f0, 0x00000021}, - {0x20007073, 0x00000004}, - {0x00005073, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007576, 0x00000002}, - {0x00007577, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x0000750f, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00600083, 0x0000000c}, - {0x006075f0, 0x00000021}, - {0x000075f8, 0x00000002}, - {0x00000083, 0x00000004}, - {0x000a750e, 0x00000002}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x0020750f, 0x00000002}, - {0x00600086, 0x00000004}, - {0x00007570, 0x00000002}, - {0x00007571, 0x00000002}, - {0x00007572, 0x00000006}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00005000, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00007568, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000095, 0x0000000c}, - {0x00058000, 0x00000002}, - {0x0c607562, 0x00000002}, - {0x00000097, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00600096, 0x00000004}, - {0x400070e5, 0000000000}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x000380e5, 0x00000002}, - {0x000000a8, 0x0000001c}, - {0x000650aa, 0x00000018}, - {0x040025bb, 0x00000002}, - {0x000610ab, 0x00000018}, - {0x040075bc, 0000000000}, - {0x000075bb, 0x00000002}, - {0x000075bc, 0000000000}, - {0x00090000, 0x00000006}, - {0x00090000, 0x00000002}, - {0x000d8002, 0x00000006}, - {0x00007832, 0x00000002}, - {0x00005000, 0x00000002}, - {0x000380e7, 0x00000002}, - {0x04002c97, 0x00000002}, - {0x00007820, 0x00000002}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x01200000, 0x00000002}, - {0x20077000, 0x00000002}, - {0x01200000, 0x00000002}, - {0x20007000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x0120751b, 0x00000002}, - {0x8040750a, 0x00000002}, - {0x8040750b, 0x00000002}, - {0x00110000, 0x00000002}, - {0x000380e5, 0x00000002}, - {0x000000c6, 0x0000001c}, - {0x000610ab, 0x00000018}, - {0x844075bd, 0x00000002}, - {0x000610aa, 0x00000018}, - {0x840075bb, 0x00000002}, - {0x000610ab, 0x00000018}, - {0x844075bc, 0x00000002}, - {0x000000c9, 0x00000004}, - {0x804075bd, 0x00000002}, - {0x800075bb, 0x00000002}, - {0x804075bc, 0x00000002}, - {0x00108000, 0x00000002}, - {0x01400000, 0x00000002}, - {0x006000cd, 0x0000000c}, - {0x20c07000, 0x00000020}, - {0x000000cf, 0x00000012}, - {0x00800000, 0x00000006}, - {0x0080751d, 0x00000006}, - {0000000000, 0000000000}, - {0x0000775c, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460275d, 0x00000020}, - {0x00004000, 0000000000}, - {0x01e00830, 0x00000002}, - {0x21007000, 0000000000}, - {0x6464614d, 0000000000}, - {0x69687420, 0000000000}, - {0x00000073, 0000000000}, - {0000000000, 0000000000}, - {0x00005000, 0x00000002}, - {0x000380d0, 0x00000002}, - {0x040025e0, 0x00000002}, - {0x000075e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000380e0, 0x00000002}, - {0x04002394, 0x00000002}, - {0x00005000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0x00000008, 0000000000}, - {0x00000004, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - -static const u32 R300_cp_microcode[][2] = { - {0x4200e000, 0000000000}, - {0x4000e000, 0000000000}, - {0x000000af, 0x00000008}, - {0x000000b3, 0x00000008}, - {0x6c5a504f, 0000000000}, - {0x4f4f497a, 0000000000}, - {0x5a578288, 0000000000}, - {0x4f91906a, 0000000000}, - {0x4f4f4f4f, 0000000000}, - {0x4fe24f44, 0000000000}, - {0x4f9c9c9c, 0000000000}, - {0xdc4f4fde, 0000000000}, - {0xa1cd4f4f, 0000000000}, - {0xd29d9d9d, 0000000000}, - {0x4f0f9fd7, 0000000000}, - {0x000ca000, 0x00000004}, - {0x000d0012, 0x00000038}, - {0x0000e8b4, 0x00000004}, - {0x000d0014, 0x00000038}, - {0x0000e8b6, 0x00000004}, - {0x000d0016, 0x00000038}, - {0x0000e854, 0x00000004}, - {0x000d0018, 0x00000038}, - {0x0000e855, 0x00000004}, - {0x000d001a, 0x00000038}, - {0x0000e856, 0x00000004}, - {0x000d001c, 0x00000038}, - {0x0000e857, 0x00000004}, - {0x000d001e, 0x00000038}, - {0x0000e824, 0x00000004}, - {0x000d0020, 0x00000038}, - {0x0000e825, 0x00000004}, - {0x000d0022, 0x00000038}, - {0x0000e830, 0x00000004}, - {0x000d0024, 0x00000038}, - {0x0000f0c0, 0x00000004}, - {0x000d0026, 0x00000038}, - {0x0000f0c1, 0x00000004}, - {0x000d0028, 0x00000038}, - {0x0000f041, 0x00000004}, - {0x000d002a, 0x00000038}, - {0x0000f184, 0x00000004}, - {0x000d002c, 0x00000038}, - {0x0000f185, 0x00000004}, - {0x000d002e, 0x00000038}, - {0x0000f186, 0x00000004}, - {0x000d0030, 0x00000038}, - {0x0000f187, 0x00000004}, - {0x000d0032, 0x00000038}, - {0x0000f180, 0x00000004}, - {0x000d0034, 0x00000038}, - {0x0000f393, 0x00000004}, - {0x000d0036, 0x00000038}, - {0x0000f38a, 0x00000004}, - {0x000d0038, 0x00000038}, - {0x0000f38e, 0x00000004}, - {0x0000e821, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00000043, 0x00000018}, - {0x00cce800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x0000003a, 0x00000008}, - {0x0000a000, 0000000000}, - {0x02c0a000, 0x00000004}, - {0x000ca000, 0x00000004}, - {0x00130000, 0x00000004}, - {0x000c2000, 0x00000004}, - {0xc980c045, 0x00000008}, - {0x2000451d, 0x00000004}, - {0x0000e580, 0x00000004}, - {0x000ce581, 0x00000004}, - {0x08004580, 0x00000004}, - {0x000ce581, 0x00000004}, - {0x0000004c, 0x00000008}, - {0x0000a000, 0000000000}, - {0x000c2000, 0x00000004}, - {0x0000e50e, 0x00000004}, - {0x00032000, 0x00000004}, - {0x00022056, 0x00000028}, - {0x00000056, 0x00000024}, - {0x0800450f, 0x00000004}, - {0x0000a050, 0x00000008}, - {0x0000e565, 0x00000004}, - {0x0000e566, 0x00000004}, - {0x00000057, 0x00000008}, - {0x03cca5b4, 0x00000004}, - {0x05432000, 0x00000004}, - {0x00022000, 0x00000004}, - {0x4ccce063, 0x00000030}, - {0x08274565, 0x00000004}, - {0x00000063, 0x00000030}, - {0x08004564, 0x00000004}, - {0x0000e566, 0x00000004}, - {0x0000005a, 0x00000008}, - {0x00802066, 0x00000010}, - {0x00202000, 0x00000004}, - {0x001b00ff, 0x00000004}, - {0x01000069, 0x00000010}, - {0x001f2000, 0x00000004}, - {0x001c00ff, 0x00000004}, - {0000000000, 0x0000000c}, - {0x00000085, 0x00000030}, - {0x0000005a, 0x00000008}, - {0x0000e576, 0x00000004}, - {0x000ca000, 0x00000004}, - {0x00012000, 0x00000004}, - {0x00082000, 0x00000004}, - {0x1800650e, 0x00000004}, - {0x00092000, 0x00000004}, - {0x000a2000, 0x00000004}, - {0x000f0000, 0x00000004}, - {0x00400000, 0x00000004}, - {0x00000079, 0x00000018}, - {0x0000e563, 0x00000004}, - {0x00c0e5f9, 0x000000c2}, - {0x0000006e, 0x00000008}, - {0x0000a06e, 0x00000008}, - {0x0000e576, 0x00000004}, - {0x0000e577, 0x00000004}, - {0x0000e50e, 0x00000004}, - {0x0000e50f, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x0000007c, 0x00000018}, - {0x00c0e5f9, 0x000000c2}, - {0x0000007c, 0x00000008}, - {0x0014e50e, 0x00000004}, - {0x0040e50f, 0x00000004}, - {0x00c0007f, 0x00000008}, - {0x0000e570, 0x00000004}, - {0x0000e571, 0x00000004}, - {0x0000e572, 0x0000000c}, - {0x0000a000, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x0000e568, 0x00000004}, - {0x000c2000, 0x00000004}, - {0x00000089, 0x00000018}, - {0x000b0000, 0x00000004}, - {0x18c0e562, 0x00000004}, - {0x0000008b, 0x00000008}, - {0x00c0008a, 0x00000008}, - {0x000700e4, 0x00000004}, - {0x00000097, 0x00000038}, - {0x000ca099, 0x00000030}, - {0x080045bb, 0x00000004}, - {0x000c209a, 0x00000030}, - {0x0800e5bc, 0000000000}, - {0x0000e5bb, 0x00000004}, - {0x0000e5bc, 0000000000}, - {0x00120000, 0x0000000c}, - {0x00120000, 0x00000004}, - {0x001b0002, 0x0000000c}, - {0x0000a000, 0x00000004}, - {0x0000e821, 0x00000004}, - {0x0000e800, 0000000000}, - {0x0000e821, 0x00000004}, - {0x0000e82e, 0000000000}, - {0x02cca000, 0x00000004}, - {0x00140000, 0x00000004}, - {0x000ce1cc, 0x00000004}, - {0x050de1cd, 0x00000004}, - {0x000000a7, 0x00000020}, - {0x4200e000, 0000000000}, - {0x000000ae, 0x00000038}, - {0x000ca000, 0x00000004}, - {0x00140000, 0x00000004}, - {0x000c2000, 0x00000004}, - {0x00160000, 0x00000004}, - {0x700ce000, 0x00000004}, - {0x001400aa, 0x00000008}, - {0x4000e000, 0000000000}, - {0x02400000, 0x00000004}, - {0x400ee000, 0x00000004}, - {0x02400000, 0x00000004}, - {0x4000e000, 0000000000}, - {0x000c2000, 0x00000004}, - {0x0240e51b, 0x00000004}, - {0x0080e50a, 0x00000005}, - {0x0080e50b, 0x00000005}, - {0x00220000, 0x00000004}, - {0x000700e4, 0x00000004}, - {0x000000c1, 0x00000038}, - {0x000c209a, 0x00000030}, - {0x0880e5bd, 0x00000005}, - {0x000c2099, 0x00000030}, - {0x0800e5bb, 0x00000005}, - {0x000c209a, 0x00000030}, - {0x0880e5bc, 0x00000005}, - {0x000000c4, 0x00000008}, - {0x0080e5bd, 0x00000005}, - {0x0000e5bb, 0x00000005}, - {0x0080e5bc, 0x00000005}, - {0x00210000, 0x00000004}, - {0x02800000, 0x00000004}, - {0x00c000c8, 0x00000018}, - {0x4180e000, 0x00000040}, - {0x000000ca, 0x00000024}, - {0x01000000, 0x0000000c}, - {0x0100e51d, 0x0000000c}, - {0x000045bb, 0x00000004}, - {0x000080c4, 0x00000008}, - {0x0000f3ce, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c053cf, 0x00000040}, - {0x00008000, 0000000000}, - {0x0000f3d2, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c053d3, 0x00000040}, - {0x00008000, 0000000000}, - {0x0000f39d, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c0539e, 0x00000040}, - {0x00008000, 0000000000}, - {0x03c00830, 0x00000004}, - {0x4200e000, 0000000000}, - {0x0000a000, 0x00000004}, - {0x200045e0, 0x00000004}, - {0x0000e5e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000700e1, 0x00000004}, - {0x0800e394, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { u32 ret; @@ -1004,8 +228,22 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) radeon_do_wait_for_idle(dev_priv); RADEON_WRITE(RADEON_CP_ME_RAM_ADDR, 0); - - if (dev_priv->microcode_version == UCODE_R200) { + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV200) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS200)) { + DRM_INFO("Loading R100 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + R100_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + R100_cp_microcode[i][0]); + } + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R200) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV250) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV280) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS300)) { DRM_INFO("Loading R200 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -1013,7 +251,11 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, R200_cp_microcode[i][0]); } - } else if (dev_priv->microcode_version == UCODE_R300) { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400)) { DRM_INFO("Loading R300 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -1021,12 +263,35 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, R300_cp_microcode[i][0]); } - } else { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV410)) { + DRM_INFO("Loading R400 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + R420_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + R420_cp_microcode[i][0]); + } + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + DRM_INFO("Loading RS690 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + RS690_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + RS690_cp_microcode[i][0]); + } + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R520) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R580) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV560) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV570)) { + DRM_INFO("Loading R500 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, - radeon_cp_microcode[i][1]); + R520_cp_microcode[i][1]); RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, - radeon_cp_microcode[i][0]); + R520_cp_microcode[i][0]); } } } diff --git a/drivers/char/drm/radeon_microcode.h b/drivers/char/drm/radeon_microcode.h new file mode 100644 index 0000000..a348c9e --- /dev/null +++ b/drivers/char/drm/radeon_microcode.h @@ -0,0 +1,1844 @@ +/* + * Copyright 2007 Advanced Micro Devices, Inc. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION + * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef RADEON_MICROCODE_H +#define RADEON_MICROCODE_H + +/* production radeon ucode r1xx-r6xx */ +static const u32 R100_cp_microcode[][2] = { + { 0x21007000, 0000000000 }, + { 0x20007000, 0000000000 }, + { 0x000000b4, 0x00000004 }, + { 0x000000b8, 0x00000004 }, + { 0x6f5b4d4c, 0000000000 }, + { 0x4c4c427f, 0000000000 }, + { 0x5b568a92, 0000000000 }, + { 0x4ca09c6d, 0000000000 }, + { 0xad4c4c4c, 0000000000 }, + { 0x4ce1af3d, 0000000000 }, + { 0xd8afafaf, 0000000000 }, + { 0xd64c4cdc, 0000000000 }, + { 0x4cd10d10, 0000000000 }, + { 0x000f0000, 0x00000016 }, + { 0x362f242d, 0000000000 }, + { 0x00000012, 0x00000004 }, + { 0x000f0000, 0x00000016 }, + { 0x362f282d, 0000000000 }, + { 0x000380e7, 0x00000002 }, + { 0x04002c97, 0x00000002 }, + { 0x000f0001, 0x00000016 }, + { 0x333a3730, 0000000000 }, + { 0x000077ef, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00000017, 0x00000004 }, + { 0x0003802b, 0x00000002 }, + { 0x040067e0, 0x00000002 }, + { 0x00000017, 0x00000004 }, + { 0x000077e0, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x000037e1, 0x00000002 }, + { 0x040067e1, 0x00000006 }, + { 0x000077e0, 0x00000002 }, + { 0x000077e1, 0x00000002 }, + { 0x000077e1, 0x00000006 }, + { 0xffffffff, 0000000000 }, + { 0x10000000, 0000000000 }, + { 0x0003802b, 0x00000002 }, + { 0x040067e0, 0x00000006 }, + { 0x00007675, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0000002f, 0x00000018 }, + { 0x0000002f, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x00000030, 0x00000018 }, + { 0x00000030, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x01605000, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00098000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x64c0603e, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00080000, 0x00000016 }, + { 0000000000, 0000000000 }, + { 0x0400251d, 0x00000002 }, + { 0x00007580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x04002580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x00000049, 0x00000004 }, + { 0x00005000, 0000000000 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x00019000, 0x00000002 }, + { 0x00011055, 0x00000014 }, + { 0x00000055, 0x00000012 }, + { 0x0400250f, 0x00000002 }, + { 0x0000504f, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007565, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000058, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x01e655b4, 0x00000002 }, + { 0x4401b0e4, 0x00000002 }, + { 0x01c110e4, 0x00000002 }, + { 0x26667066, 0x00000018 }, + { 0x040c2565, 0x00000002 }, + { 0x00000066, 0x00000018 }, + { 0x04002564, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x0000005d, 0x00000004 }, + { 0x00401069, 0x00000008 }, + { 0x00101000, 0x00000002 }, + { 0x000d80ff, 0x00000002 }, + { 0x0080006c, 0x00000008 }, + { 0x000f9000, 0x00000002 }, + { 0x000e00ff, 0x00000002 }, + { 0000000000, 0x00000006 }, + { 0x0000008f, 0x00000018 }, + { 0x0000005b, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007576, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00009000, 0x00000002 }, + { 0x00041000, 0x00000002 }, + { 0x0c00350e, 0x00000002 }, + { 0x00049000, 0x00000002 }, + { 0x00051000, 0x00000002 }, + { 0x01e785f8, 0x00000002 }, + { 0x00200000, 0x00000002 }, + { 0x0060007e, 0x0000000c }, + { 0x00007563, 0x00000002 }, + { 0x006075f0, 0x00000021 }, + { 0x20007073, 0x00000004 }, + { 0x00005073, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007576, 0x00000002 }, + { 0x00007577, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x0000750f, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00600083, 0x0000000c }, + { 0x006075f0, 0x00000021 }, + { 0x000075f8, 0x00000002 }, + { 0x00000083, 0x00000004 }, + { 0x000a750e, 0x00000002 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x0020750f, 0x00000002 }, + { 0x00600086, 0x00000004 }, + { 0x00007570, 0x00000002 }, + { 0x00007571, 0x00000002 }, + { 0x00007572, 0x00000006 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00005000, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00007568, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000095, 0x0000000c }, + { 0x00058000, 0x00000002 }, + { 0x0c607562, 0x00000002 }, + { 0x00000097, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00600096, 0x00000004 }, + { 0x400070e5, 0000000000 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x000380e5, 0x00000002 }, + { 0x000000a8, 0x0000001c }, + { 0x000650aa, 0x00000018 }, + { 0x040025bb, 0x00000002 }, + { 0x000610ab, 0x00000018 }, + { 0x040075bc, 0000000000 }, + { 0x000075bb, 0x00000002 }, + { 0x000075bc, 0000000000 }, + { 0x00090000, 0x00000006 }, + { 0x00090000, 0x00000002 }, + { 0x000d8002, 0x00000006 }, + { 0x00007832, 0x00000002 }, + { 0x00005000, 0x00000002 }, + { 0x000380e7, 0x00000002 }, + { 0x04002c97, 0x00000002 }, + { 0x00007820, 0x00000002 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x01200000, 0x00000002 }, + { 0x20077000, 0x00000002 }, + { 0x01200000, 0x00000002 }, + { 0x20007000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x0120751b, 0x00000002 }, + { 0x8040750a, 0x00000002 }, + { 0x8040750b, 0x00000002 }, + { 0x00110000, 0x00000002 }, + { 0x000380e5, 0x00000002 }, + { 0x000000c6, 0x0000001c }, + { 0x000610ab, 0x00000018 }, + { 0x844075bd, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x840075bb, 0x00000002 }, + { 0x000610ab, 0x00000018 }, + { 0x844075bc, 0x00000002 }, + { 0x000000c9, 0x00000004 }, + { 0x804075bd, 0x00000002 }, + { 0x800075bb, 0x00000002 }, + { 0x804075bc, 0x00000002 }, + { 0x00108000, 0x00000002 }, + { 0x01400000, 0x00000002 }, + { 0x006000cd, 0x0000000c }, + { 0x20c07000, 0x00000020 }, + { 0x000000cf, 0x00000012 }, + { 0x00800000, 0x00000006 }, + { 0x0080751d, 0x00000006 }, + { 0000000000, 0000000000 }, + { 0x0000775c, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460275d, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x01e00830, 0x00000002 }, + { 0x21007000, 0000000000 }, + { 0x6464614d, 0000000000 }, + { 0x69687420, 0000000000 }, + { 0x00000073, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x00005000, 0x00000002 }, + { 0x000380d0, 0x00000002 }, + { 0x040025e0, 0x00000002 }, + { 0x000075e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000380e0, 0x00000002 }, + { 0x04002394, 0x00000002 }, + { 0x00005000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x00000008, 0000000000 }, + { 0x00000004, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R200_cp_microcode[][2] = { + { 0x21007000, 0000000000 }, + { 0x20007000, 0000000000 }, + { 0x000000bf, 0x00000004 }, + { 0x000000c3, 0x00000004 }, + { 0x7a685e5d, 0000000000 }, + { 0x5d5d5588, 0000000000 }, + { 0x68659197, 0000000000 }, + { 0x5da19f78, 0000000000 }, + { 0x5d5d5d5d, 0000000000 }, + { 0x5dee5d50, 0000000000 }, + { 0xf2acacac, 0000000000 }, + { 0xe75df9e9, 0000000000 }, + { 0xb1dd0e11, 0000000000 }, + { 0xe2afafaf, 0000000000 }, + { 0x000f0000, 0x00000016 }, + { 0x452f232d, 0000000000 }, + { 0x00000013, 0x00000004 }, + { 0x000f0000, 0x00000016 }, + { 0x452f272d, 0000000000 }, + { 0x000f0001, 0x00000016 }, + { 0x3e4d4a37, 0000000000 }, + { 0x000077ef, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00000016, 0x00000004 }, + { 0x0003802a, 0x00000002 }, + { 0x040067e0, 0x00000002 }, + { 0x00000016, 0x00000004 }, + { 0x000077e0, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x000037e1, 0x00000002 }, + { 0x040067e1, 0x00000006 }, + { 0x000077e0, 0x00000002 }, + { 0x000077e1, 0x00000002 }, + { 0x000077e1, 0x00000006 }, + { 0xffffffff, 0000000000 }, + { 0x10000000, 0000000000 }, + { 0x07f007f0, 0000000000 }, + { 0x0003802a, 0x00000002 }, + { 0x040067e0, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007675, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802b, 0x00000002 }, + { 0x04002676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0000002f, 0x00000018 }, + { 0x0000002f, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x00000037, 0x00000018 }, + { 0x00000037, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x01605000, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00098000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x64c06051, 0x00000004 }, + { 0x00080000, 0x00000016 }, + { 0000000000, 0000000000 }, + { 0x0400251d, 0x00000002 }, + { 0x00007580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x04002580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x0000005a, 0x00000004 }, + { 0x00005000, 0000000000 }, + { 0x00061000, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x00019000, 0x00000002 }, + { 0x00011064, 0x00000014 }, + { 0x00000064, 0x00000012 }, + { 0x0400250f, 0x00000002 }, + { 0x0000505e, 0x00000004 }, + { 0x00007565, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000065, 0x00000004 }, + { 0x01e655b4, 0x00000002 }, + { 0x4401b0f0, 0x00000002 }, + { 0x01c110f0, 0x00000002 }, + { 0x26667071, 0x00000018 }, + { 0x040c2565, 0x00000002 }, + { 0x00000071, 0x00000018 }, + { 0x04002564, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000068, 0x00000004 }, + { 0x00401074, 0x00000008 }, + { 0x00101000, 0x00000002 }, + { 0x000d80ff, 0x00000002 }, + { 0x00800077, 0x00000008 }, + { 0x000f9000, 0x00000002 }, + { 0x000e00ff, 0x00000002 }, + { 0000000000, 0x00000006 }, + { 0x00000094, 0x00000018 }, + { 0x00000068, 0x00000004 }, + { 0x00007576, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00009000, 0x00000002 }, + { 0x00041000, 0x00000002 }, + { 0x0c00350e, 0x00000002 }, + { 0x00049000, 0x00000002 }, + { 0x00051000, 0x00000002 }, + { 0x01e785f8, 0x00000002 }, + { 0x00200000, 0x00000002 }, + { 0x00600087, 0x0000000c }, + { 0x00007563, 0x00000002 }, + { 0x006075f0, 0x00000021 }, + { 0x2000707c, 0x00000004 }, + { 0x0000507c, 0x00000004 }, + { 0x00007576, 0x00000002 }, + { 0x00007577, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x0000750f, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x0060008a, 0x0000000c }, + { 0x006075f0, 0x00000021 }, + { 0x000075f8, 0x00000002 }, + { 0x0000008a, 0x00000004 }, + { 0x000a750e, 0x00000002 }, + { 0x0020750f, 0x00000002 }, + { 0x0060008d, 0x00000004 }, + { 0x00007570, 0x00000002 }, + { 0x00007571, 0x00000002 }, + { 0x00007572, 0x00000006 }, + { 0x00005000, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00007568, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000098, 0x0000000c }, + { 0x00058000, 0x00000002 }, + { 0x0c607562, 0x00000002 }, + { 0x0000009a, 0x00000004 }, + { 0x00600099, 0x00000004 }, + { 0x400070f1, 0000000000 }, + { 0x000380f1, 0x00000002 }, + { 0x000000a7, 0x0000001c }, + { 0x000650a9, 0x00000018 }, + { 0x040025bb, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x040075bc, 0000000000 }, + { 0x000075bb, 0x00000002 }, + { 0x000075bc, 0000000000 }, + { 0x00090000, 0x00000006 }, + { 0x00090000, 0x00000002 }, + { 0x000d8002, 0x00000006 }, + { 0x00005000, 0x00000002 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x01665000, 0x00000002 }, + { 0x000a0000, 0x00000002 }, + { 0x000671cc, 0x00000002 }, + { 0x0286f1cd, 0x00000002 }, + { 0x000000b7, 0x00000010 }, + { 0x21007000, 0000000000 }, + { 0x000000be, 0x0000001c }, + { 0x00065000, 0x00000002 }, + { 0x000a0000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x000b0000, 0x00000002 }, + { 0x38067000, 0x00000002 }, + { 0x000a00ba, 0x00000004 }, + { 0x20007000, 0000000000 }, + { 0x01200000, 0x00000002 }, + { 0x20077000, 0x00000002 }, + { 0x01200000, 0x00000002 }, + { 0x20007000, 0000000000 }, + { 0x00061000, 0x00000002 }, + { 0x0120751b, 0x00000002 }, + { 0x8040750a, 0x00000002 }, + { 0x8040750b, 0x00000002 }, + { 0x00110000, 0x00000002 }, + { 0x000380f1, 0x00000002 }, + { 0x000000d1, 0x0000001c }, + { 0x000610aa, 0x00000018 }, + { 0x844075bd, 0x00000002 }, + { 0x000610a9, 0x00000018 }, + { 0x840075bb, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x844075bc, 0x00000002 }, + { 0x000000d4, 0x00000004 }, + { 0x804075bd, 0x00000002 }, + { 0x800075bb, 0x00000002 }, + { 0x804075bc, 0x00000002 }, + { 0x00108000, 0x00000002 }, + { 0x01400000, 0x00000002 }, + { 0x006000d8, 0x0000000c }, + { 0x20c07000, 0x00000020 }, + { 0x000000da, 0x00000012 }, + { 0x00800000, 0x00000006 }, + { 0x0080751d, 0x00000006 }, + { 0x000025bb, 0x00000002 }, + { 0x000040d4, 0x00000004 }, + { 0x0000775c, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460275d, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x00007999, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460299b, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x01e00830, 0x00000002 }, + { 0x21007000, 0000000000 }, + { 0x00005000, 0x00000002 }, + { 0x00038056, 0x00000002 }, + { 0x040025e0, 0x00000002 }, + { 0x000075e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000380ed, 0x00000002 }, + { 0x04007394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000078c4, 0x00000002 }, + { 0x000078c5, 0x00000002 }, + { 0x000078c6, 0x00000002 }, + { 0x00007924, 0x00000002 }, + { 0x00007925, 0x00000002 }, + { 0x00007926, 0x00000002 }, + { 0x000000f2, 0x00000004 }, + { 0x00007924, 0x00000002 }, + { 0x00007925, 0x00000002 }, + { 0x00007926, 0x00000002 }, + { 0x000000f9, 0x00000004 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R300_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x000000ae, 0x00000008 }, + { 0x000000b2, 0x00000008 }, + { 0x67554b4a, 0000000000 }, + { 0x4a4a4475, 0000000000 }, + { 0x55527d83, 0000000000 }, + { 0x4a8c8b65, 0000000000 }, + { 0x4aef4af6, 0000000000 }, + { 0x4ae14a4a, 0000000000 }, + { 0xe4979797, 0000000000 }, + { 0xdb4aebdd, 0000000000 }, + { 0x9ccc4a4a, 0000000000 }, + { 0xd1989898, 0000000000 }, + { 0x4a0f9ad6, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000080, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x00012000, 0x00000004 }, + { 0x00082000, 0x00000004 }, + { 0x1800650e, 0x00000004 }, + { 0x00092000, 0x00000004 }, + { 0x000a2000, 0x00000004 }, + { 0x000f0000, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000074, 0x00000018 }, + { 0x0000e563, 0x00000004 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0000a069, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000077, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000077, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0007a, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000084, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000086, 0x00000008 }, + { 0x00c00085, 0x00000008 }, + { 0x000700e3, 0x00000004 }, + { 0x00000092, 0x00000038 }, + { 0x000ca094, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2095, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x000000a4, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x000000a1, 0x00000008 }, + { 0x000000a6, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x000000ad, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x001400a9, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700e3, 0x00000004 }, + { 0x000000c0, 0x00000038 }, + { 0x000c2095, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2094, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2095, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000c3, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000c7, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000c9, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080c3, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700e0, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000e4, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000eb, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000f3, 0x00000034 }, + { 0x000000f0, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R420_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x00000099, 0x00000008 }, + { 0x0000009d, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0xd9d3dff6, 0000000000 }, + { 0x4ac54a4a, 0000000000 }, + { 0xc8828282, 0000000000 }, + { 0xbf4acfc1, 0000000000 }, + { 0x87b04a4a, 0000000000 }, + { 0xb5838383, 0000000000 }, + { 0x4a0f85ba, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700c7, 0x00000004 }, + { 0x00000080, 0x00000038 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x0000008f, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x0000008c, 0x00000008 }, + { 0x00000091, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x00000098, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x00140094, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700c7, 0x00000004 }, + { 0x000000a4, 0x00000038 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000ab, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000ad, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080a7, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c4, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000c8, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cf, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000d7, 0x00000034 }, + { 0x000000d4, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x0000e1cc, 0x00000004 }, + { 0x0500e1cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000de, 0x00000034 }, + { 0x000000da, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x0019e1cc, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x0500a000, 0x00000004 }, + { 0x080041cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 RS600_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x000000a0, 0x00000008 }, + { 0x000000a4, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0x4ae74af6, 0000000000 }, + { 0x4ad34a4a, 0000000000 }, + { 0xd6898989, 0000000000 }, + { 0xcd4addcf, 0000000000 }, + { 0x8ebe4ae2, 0000000000 }, + { 0xc38a8a8a, 0000000000 }, + { 0x4a0f8cc8, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700d5, 0x00000004 }, + { 0x00000084, 0x00000038 }, + { 0x000ca086, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2087, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000096, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x00000093, 0x00000008 }, + { 0x00000098, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x0000009f, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x0014009b, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700d5, 0x00000004 }, + { 0x000000b2, 0x00000038 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2086, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000b5, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000b9, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000bb, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080b5, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700d2, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000d6, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000dd, 0x00000008 }, + { 0x00e00116, 0000000000 }, + { 0x000700e1, 0x00000004 }, + { 0x0800401c, 0x00000004 }, + { 0x200050e7, 0x00000004 }, + { 0x0000e01d, 0x00000004 }, + { 0x000000e4, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000eb, 0x00000034 }, + { 0x000000e8, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 RS690_cp_microcode[][2] = { + { 0x000000dd, 0x00000008 }, + { 0x000000df, 0x00000008 }, + { 0x000000a0, 0x00000008 }, + { 0x000000a4, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0x4ad74af6, 0000000000 }, + { 0x4ac94a4a, 0000000000 }, + { 0xcc898989, 0000000000 }, + { 0xc34ad3c5, 0000000000 }, + { 0x8e4a4a4a, 0000000000 }, + { 0x4a8a8a8a, 0000000000 }, + { 0x4a0f8c4a, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700cb, 0x00000004 }, + { 0x00000084, 0x00000038 }, + { 0x000ca086, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2087, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000096, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x00000093, 0x00000008 }, + { 0x00000098, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x0000009f, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x0014009b, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x00100000, 0x0000002c }, + { 0x00004000, 0000000000 }, + { 0x080045c8, 0x00000004 }, + { 0x00240005, 0x00000004 }, + { 0x08004d0b, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700cb, 0x00000004 }, + { 0x000000b7, 0x00000038 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2086, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000ba, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000be, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000c0, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080ba, 0x00000008 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c8, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cc, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000d3, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000db, 0x00000034 }, + { 0x000000d8, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x000000e1, 0x00000030 }, + { 0x4200e000, 0000000000 }, + { 0x000000e1, 0x00000030 }, + { 0x4000e000, 0000000000 }, + { 0x0025001b, 0x00000004 }, + { 0x00230000, 0x00000004 }, + { 0x00250005, 0x00000004 }, + { 0x000000e6, 0x00000034 }, + { 0000000000, 0x0000000c }, + { 0x00244000, 0x00000004 }, + { 0x080045c8, 0x00000004 }, + { 0x00240005, 0x00000004 }, + { 0x08004d0b, 0x0000000c }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R520_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x00000099, 0x00000008 }, + { 0x0000009d, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0xe0dae6f6, 0000000000 }, + { 0x4ac54a4a, 0000000000 }, + { 0xc8828282, 0000000000 }, + { 0xbf4acfc1, 0000000000 }, + { 0x87b04ad5, 0000000000 }, + { 0xb5838383, 0000000000 }, + { 0x4a0f85ba, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700c7, 0x00000004 }, + { 0x00000080, 0x00000038 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x0000008f, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x0000008c, 0x00000008 }, + { 0x00000091, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x00000098, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x00140094, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700c7, 0x00000004 }, + { 0x000000a4, 0x00000038 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000ab, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000ad, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080a7, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c4, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000c8, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cf, 0x00000008 }, + { 0xdeadbeef, 0000000000 }, + { 0x00000116, 0000000000 }, + { 0x000700d3, 0x00000004 }, + { 0x080050e7, 0x00000004 }, + { 0x000700d4, 0x00000004 }, + { 0x0800401c, 0x00000004 }, + { 0x0000e01d, 0000000000 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000de, 0x00000034 }, + { 0x000000db, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x0000e1cc, 0x00000004 }, + { 0x0500e1cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000e5, 0x00000034 }, + { 0x000000e1, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x0019e1cc, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x0500a000, 0x00000004 }, + { 0x080041cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + + +#endif -- cgit v0.10.2 From fa0d71b967506031f7cb08ced6095d1c4f988594 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 11:27:01 +1000 Subject: drm/rs690: set all of gart base address. Docs state bits 4-11 maps to bits 32-39 of the 40-bit range Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index d8ede40..1e434ba 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -659,8 +659,9 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID); RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800); - RS690_WRITE_MCIND(RS690_MC_GART_BASE, - dev_priv->gart_info.bus_addr); + temp = dev_priv->gart_info.bus_addr & 0xfffff000; + temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; + RS690_WRITE_MCIND(RS690_MC_GART_BASE, temp); temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL); RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000); -- cgit v0.10.2 From 3722bfc607d46275369865c02fe8694486d640b5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 11:28:27 +1000 Subject: drm/rs690: set base 2 to 0. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 1e434ba..6e13f4b 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -669,6 +669,8 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) RS690_WRITE_MCIND(RS690_MC_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); + RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16)); diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 173ae62..b22816b 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -497,6 +497,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 #define RS690_MC_AGP_BASE 0x102 +#define RS690_MC_AGP_BASE_2 0x103 #define R520_MC_IND_INDEX 0x70 #define R520_MC_IND_WR_EN (1<<24) -- cgit v0.10.2 From 2735977b12cb0f113aae24afff04747b6d0f5bf1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 12:54:16 +1000 Subject: drm/radeon: IGP clean up register and magic numbers. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 6e13f4b..38eda33 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -109,9 +109,9 @@ static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr) { u32 ret; - RADEON_WRITE(RADEON_IGPGART_INDEX, addr & 0x7f); - ret = RADEON_READ(RADEON_IGPGART_DATA); - RADEON_WRITE(RADEON_IGPGART_INDEX, 0x7f); + RADEON_WRITE(RS400_NB_MC_INDEX, addr & 0x7f); + ret = RADEON_READ(RS400_NB_MC_DATA); + RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); return ret; } @@ -613,14 +613,18 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_18, 0x1000); - RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, 0x1); - RADEON_WRITE_IGPGART(RADEON_IGPGART_CTRL, 0x42040800); - RADEON_WRITE_IGPGART(RADEON_IGPGART_BASE_ADDR, + RADEON_WRITE_IGPGART(RS400_MC_MISC_CNTL, RS400_GART_INDEX_REG_EN); + RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); + RADEON_WRITE_IGPGART(RS400_GART_FEATURE_ID, (RS400_HANG_EN | + RS400_TLB_ENABLE | + RS400_GTW_LAC_EN | + RS400_1LEVEL_GART)); + RADEON_WRITE_IGPGART(RS400_GART_BASE, dev_priv->gart_info.bus_addr); - temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_UNK_39); - RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_39, temp); + temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_MODE_CNTL); + RADEON_WRITE_IGPGART(RS400_AGP_MODE_CNTL, temp); RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); dev_priv->gart_size = 32*1024*1024; @@ -629,13 +633,13 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16))); - temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_ENABLE); - RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, temp); + temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); + RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, temp); - RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); - RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x1); - RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); - RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x0); + RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); + RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, RS400_GART_CACHE_INVALIDATE); + RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); + RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, 0); } } @@ -650,21 +654,26 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_MISC_CNTL); - RS690_WRITE_MCIND(RS690_MC_MISC_CNTL, 0x5000); + temp = RS690_READ_MCIND(dev_priv, RS400_MC_MISC_CNTL); + RS690_WRITE_MCIND(RS400_MC_MISC_CNTL, (RS400_GART_INDEX_REG_EN | + RS690_BLOCK_GFX_D3_EN)); - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, - RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID); - RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_FEATURE_ID); + RS690_WRITE_MCIND(RS400_GART_FEATURE_ID, (RS400_HANG_EN | + RS400_TLB_ENABLE | + RS400_GTW_LAC_EN | + RS400_1LEVEL_GART)); temp = dev_priv->gart_info.bus_addr & 0xfffff000; temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; - RS690_WRITE_MCIND(RS690_MC_GART_BASE, temp); + RS690_WRITE_MCIND(RS400_GART_BASE, temp); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL); - RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000); + temp = RS690_READ_MCIND(dev_priv, RS400_AGP_MODE_CNTL); + RS690_WRITE_MCIND(RS400_AGP_MODE_CNTL, ((1 << RS400_REQ_TYPE_SNOOP_SHIFT) | + RS400_REQ_TYPE_SNOOP_DIS)); RS690_WRITE_MCIND(RS690_MC_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); @@ -677,32 +686,32 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_SIZE); - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, - RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB); + temp = RS690_READ_MCIND(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); do { - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); if ((temp & RS690_MC_GART_CLEAR_STATUS) == RS690_MC_GART_CLEAR_DONE) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL, - RS690_MC_GART_CC_CLEAR); + RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, + RS400_GART_CACHE_INVALIDATE); + do { - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + RS690_MC_GART_CLEAR_DONE) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL, - RS690_MC_GART_CC_NO_CHANGE); + RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, 0); } else { - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, RS690_MC_GART_DIS); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, 0); } } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index b22816b..f25933e 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -444,13 +444,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_DATA 0x0034 #define RADEON_PCIE_TX_GART_CNTL 0x10 # define RADEON_PCIE_TX_GART_EN (1 << 0) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1<<1) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3<<1) -# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0<<3) -# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1<<3) -# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1<<5) -# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1<<8) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1 << 1) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3 << 1) +# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0 << 3) +# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1 << 3) +# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1 << 5) +# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1 << 8) #define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11 #define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12 #define RADEON_PCIE_TX_GART_BASE 0x13 @@ -459,14 +459,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_TX_GART_END_LO 0x16 #define RADEON_PCIE_TX_GART_END_HI 0x17 -#define RADEON_IGPGART_INDEX 0x168 -#define RADEON_IGPGART_DATA 0x16c -#define RADEON_IGPGART_UNK_18 0x18 -#define RADEON_IGPGART_CTRL 0x2b -#define RADEON_IGPGART_BASE_ADDR 0x2c -#define RADEON_IGPGART_FLUSH 0x2e -#define RADEON_IGPGART_ENABLE 0x38 -#define RADEON_IGPGART_UNK_39 0x39 +#define RS400_NB_MC_INDEX 0x168 +# define RS400_NB_MC_IND_WR_EN (1 << 8) +#define RS400_NB_MC_DATA 0x16c #define RS690_MC_INDEX 0x78 # define RS690_MC_INDEX_MASK 0x1ff @@ -474,33 +469,55 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RS690_MC_INDEX_WR_ACK 0x7f #define RS690_MC_DATA 0x7c -#define RS690_MC_MISC_CNTL 0x18 -#define RS690_MC_GART_FEATURE_ID 0x2b -#define RS690_MC_GART_BASE 0x2c -#define RS690_MC_GART_CACHE_CNTL 0x2e -# define RS690_MC_GART_CC_NO_CHANGE 0x0 -# define RS690_MC_GART_CC_CLEAR 0x1 -# define RS690_MC_GART_CLEAR_STATUS (1 << 1) +/* MC indirect registers */ +#define RS400_MC_MISC_CNTL 0x18 +# define RS400_DISABLE_GTW (1 << 1) +/* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */ +# define RS400_GART_INDEX_REG_EN (1 << 12) +# define RS690_BLOCK_GFX_D3_EN (1 << 14) +#define RS400_K8_FB_LOCATION 0x1e +#define RS400_GART_FEATURE_ID 0x2b +# define RS400_HANG_EN (1 << 11) +# define RS400_TLB_ENABLE (1 << 18) +# define RS400_P2P_ENABLE (1 << 19) +# define RS400_GTW_LAC_EN (1 << 25) +# define RS400_2LEVEL_GART (0 << 30) +# define RS400_1LEVEL_GART (1 << 30) +# define RS400_PDC_EN (1 << 31) +#define RS400_GART_BASE 0x2c +#define RS400_GART_CACHE_CNTRL 0x2e +# define RS400_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ +/* ??? */ +# define RS690_MC_GART_CLEAR_STATUS (1 << 1) # define RS690_MC_GART_CLEAR_DONE (0 << 1) # define RS690_MC_GART_CLEAR_PENDING (1 << 1) -#define RS690_MC_AGP_SIZE 0x38 -# define RS690_MC_GART_DIS 0x0 -# define RS690_MC_GART_EN 0x1 -# define RS690_MC_AGP_SIZE_32MB (0 << 1) -# define RS690_MC_AGP_SIZE_64MB (1 << 1) -# define RS690_MC_AGP_SIZE_128MB (2 << 1) -# define RS690_MC_AGP_SIZE_256MB (3 << 1) -# define RS690_MC_AGP_SIZE_512MB (4 << 1) -# define RS690_MC_AGP_SIZE_1GB (5 << 1) -# define RS690_MC_AGP_SIZE_2GB (6 << 1) -#define RS690_MC_AGP_MODE_CONTROL 0x39 +#define RS400_AGP_ADDRESS_SPACE_SIZE 0x38 +# define RS400_GART_EN (1 << 0) +# define RS400_VA_SIZE_32MB (0 << 1) +# define RS400_VA_SIZE_64MB (1 << 1) +# define RS400_VA_SIZE_128MB (2 << 1) +# define RS400_VA_SIZE_256MB (3 << 1) +# define RS400_VA_SIZE_512MB (4 << 1) +# define RS400_VA_SIZE_1GB (5 << 1) +# define RS400_VA_SIZE_2GB (6 << 1) +#define RS400_AGP_MODE_CNTL 0x39 +# define RS400_POST_GART_Q_SIZE (1 << 18) +# define RS400_NONGART_SNOOP (1 << 19) +# define RS400_AGP_RD_BUF_SIZE (1 << 20) +# define RS400_REQ_TYPE_SNOOP_SHIFT 22 +# define RS400_REQ_TYPE_SNOOP_MASK 0x3 +# define RS400_REQ_TYPE_SNOOP_DIS (1 << 24) +#define RS400_MC_MISC_UMA_CNTL 0x5f +#define RS400_MC_MCLK_CNTL 0x7a +#define RS400_MC_UMA_DUALCH_CNTL 0x86 + #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 #define RS690_MC_AGP_BASE 0x102 #define RS690_MC_AGP_BASE_2 0x103 #define R520_MC_IND_INDEX 0x70 -#define R520_MC_IND_WR_EN (1<<24) +#define R520_MC_IND_WR_EN (1 << 24) #define R520_MC_IND_DATA 0x74 #define RV515_MC_FB_LOCATION 0x01 @@ -512,6 +529,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 +#define RADEON_AGP_BASE_2 0x015c +#define RS400_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 #define RADEON_RB3D_COLOROFFSET 0x1c40 @@ -1079,36 +1098,36 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_READ8(reg) DRM_READ8( dev_priv->mmio, (reg) ) #define RADEON_WRITE8(reg,val) DRM_WRITE8( dev_priv->mmio, (reg), (val) ) -#define RADEON_WRITE_PLL( addr, val ) \ +#define RADEON_WRITE_PLL(addr, val) \ do { \ - RADEON_WRITE8( RADEON_CLOCK_CNTL_INDEX, \ + RADEON_WRITE8(RADEON_CLOCK_CNTL_INDEX, \ ((addr) & 0x1f) | RADEON_PLL_WR_EN ); \ - RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) ); \ + RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \ } while (0) -#define RADEON_WRITE_IGPGART( addr, val ) \ +#define RADEON_WRITE_IGPGART(addr, val) \ do { \ - RADEON_WRITE( RADEON_IGPGART_INDEX, \ - ((addr) & 0x7f) | (1 << 8)); \ - RADEON_WRITE( RADEON_IGPGART_DATA, (val) ); \ - RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f ); \ + RADEON_WRITE(RS400_NB_MC_INDEX, \ + ((addr) & 0x7f) | RS400_NB_MC_IND_WR_EN); \ + RADEON_WRITE(RS400_NB_MC_DATA, (val)); \ + RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); \ } while (0) -#define RADEON_WRITE_PCIE( addr, val ) \ +#define RADEON_WRITE_PCIE(addr, val) \ do { \ - RADEON_WRITE8( RADEON_PCIE_INDEX, \ + RADEON_WRITE8(RADEON_PCIE_INDEX, \ ((addr) & 0xff)); \ - RADEON_WRITE( RADEON_PCIE_DATA, (val) ); \ + RADEON_WRITE(RADEON_PCIE_DATA, (val)); \ } while (0) -#define RADEON_WRITE_MCIND( addr, val ) \ +#define RADEON_WRITE_MCIND(addr, val) \ do { \ RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ RADEON_WRITE(R520_MC_IND_DATA, (val)); \ RADEON_WRITE(R520_MC_IND_INDEX, 0); \ } while (0) -#define RS690_WRITE_MCIND( addr, val ) \ +#define RS690_WRITE_MCIND(addr, val) \ do { \ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_EN | ((addr) & RS690_MC_INDEX_MASK)); \ RADEON_WRITE(RS690_MC_DATA, val); \ -- cgit v0.10.2 From 45e519052e8f583a709edd442a23f59581d3fe42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 13:28:59 +1000 Subject: drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support We only support RS480 (AMD based IGP) at the moment not RS400 (Intel based IGP) ones. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index a6a499f..bad096f 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -103,20 +103,18 @@ {0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ - {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \ - {0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 38eda33..3a42498 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -2,6 +2,7 @@ /* * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas. * Copyright 2000 VA Linux Systems, Inc., Fremont, California. + * Copyright 2007 Advanced Micro Devices, Inc. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a @@ -40,7 +41,7 @@ static int radeon_do_cleanup_cp(struct drm_device * dev); -static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { u32 ret; RADEON_WRITE(R520_MC_IND_INDEX, 0x7f0000 | (addr & 0xff)); @@ -49,21 +50,41 @@ static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) return ret; } +static u32 RS480_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +{ + u32 ret; + RADEON_WRITE(RS480_NB_MC_INDEX, addr & 0xff); + ret = RADEON_READ(RS480_NB_MC_DATA); + RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); + return ret; +} + static u32 RS690_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { + u32 ret; RADEON_WRITE(RS690_MC_INDEX, (addr & RS690_MC_INDEX_MASK)); - return RADEON_READ(RS690_MC_DATA); + ret = RADEON_READ(RS690_MC_DATA); + RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_MASK); + return ret; +} + +static u32 IGP_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +{ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + return RS690_READ_MCIND(dev_priv, addr); + else + return RS480_READ_MCIND(dev_priv, addr); } u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - return RADEON_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); + return R500_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) return RS690_READ_MCIND(dev_priv, RS690_MC_FB_LOCATION); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - return RADEON_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); + return R500_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); else return RADEON_READ(RADEON_MC_FB_LOCATION); } @@ -71,11 +92,11 @@ u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - RADEON_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); + R500_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) RS690_WRITE_MCIND(RS690_MC_FB_LOCATION, fb_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - RADEON_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); + R500_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); else RADEON_WRITE(RADEON_MC_FB_LOCATION, fb_loc); } @@ -83,11 +104,11 @@ static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_loc) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - RADEON_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); + R500_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, agp_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - RADEON_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); + R500_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); else RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc); } @@ -106,15 +127,6 @@ static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) return RADEON_READ(RADEON_PCIE_DATA); } -static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr) -{ - u32 ret; - RADEON_WRITE(RS400_NB_MC_INDEX, addr & 0x7f); - ret = RADEON_READ(RS400_NB_MC_DATA); - RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); - return ret; -} - #if RADEON_FIFO_DEBUG static void radeon_status(drm_radeon_private_t * dev_priv) { @@ -255,7 +267,7 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || - ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400)) { + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) { DRM_INFO("Loading R300 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -604,114 +616,77 @@ static void radeon_test_writeback(drm_radeon_private_t * dev_priv) /* Enable or disable IGP GART on the chip */ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) { - u32 temp, tmp; - - tmp = RADEON_READ(RADEON_AIC_CNTL); - if (on) { - DRM_DEBUG("programming igpgart %08X %08lX %08X\n", - dev_priv->gart_vm_start, - (long)dev_priv->gart_info.bus_addr, - dev_priv->gart_size); - - RADEON_WRITE_IGPGART(RS400_MC_MISC_CNTL, RS400_GART_INDEX_REG_EN); - RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); - RADEON_WRITE_IGPGART(RS400_GART_FEATURE_ID, (RS400_HANG_EN | - RS400_TLB_ENABLE | - RS400_GTW_LAC_EN | - RS400_1LEVEL_GART)); - RADEON_WRITE_IGPGART(RS400_GART_BASE, - dev_priv->gart_info.bus_addr); - - temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_MODE_CNTL); - RADEON_WRITE_IGPGART(RS400_AGP_MODE_CNTL, temp); - - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); - dev_priv->gart_size = 32*1024*1024; - radeon_write_agp_location(dev_priv, - (((dev_priv->gart_vm_start - 1 + - dev_priv->gart_size) & 0xffff0000) | - (dev_priv->gart_vm_start >> 16))); - - temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); - RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, temp); - - RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); - RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, RS400_GART_CACHE_INVALIDATE); - RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); - RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, 0); - } -} - -/* Enable or disable RS690 GART on the chip */ -static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) -{ u32 temp; if (on) { - DRM_DEBUG("programming rs690 gart %08X %08lX %08X\n", + DRM_DEBUG("programming igp gart %08X %08lX %08X\n", dev_priv->gart_vm_start, (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - temp = RS690_READ_MCIND(dev_priv, RS400_MC_MISC_CNTL); - RS690_WRITE_MCIND(RS400_MC_MISC_CNTL, (RS400_GART_INDEX_REG_EN | - RS690_BLOCK_GFX_D3_EN)); + temp = IGP_READ_MCIND(dev_priv, RS480_MC_MISC_CNTL); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, (RS480_GART_INDEX_REG_EN | + RS690_BLOCK_GFX_D3_EN)); + else + IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN); - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | + RS480_VA_SIZE_32MB)); - temp = RS690_READ_MCIND(dev_priv, RS400_GART_FEATURE_ID); - RS690_WRITE_MCIND(RS400_GART_FEATURE_ID, (RS400_HANG_EN | - RS400_TLB_ENABLE | - RS400_GTW_LAC_EN | - RS400_1LEVEL_GART)); + temp = IGP_READ_MCIND(dev_priv, RS480_GART_FEATURE_ID); + IGP_WRITE_MCIND(RS480_GART_FEATURE_ID, (RS480_HANG_EN | + RS480_TLB_ENABLE | + RS480_GTW_LAC_EN | + RS480_1LEVEL_GART)); temp = dev_priv->gart_info.bus_addr & 0xfffff000; temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; - RS690_WRITE_MCIND(RS400_GART_BASE, temp); + IGP_WRITE_MCIND(RS480_GART_BASE, temp); - temp = RS690_READ_MCIND(dev_priv, RS400_AGP_MODE_CNTL); - RS690_WRITE_MCIND(RS400_AGP_MODE_CNTL, ((1 << RS400_REQ_TYPE_SNOOP_SHIFT) | - RS400_REQ_TYPE_SNOOP_DIS)); + temp = IGP_READ_MCIND(dev_priv, RS480_AGP_MODE_CNTL); + IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) | + RS480_REQ_TYPE_SNOOP_DIS)); - RS690_WRITE_MCIND(RS690_MC_AGP_BASE, - (unsigned int)dev_priv->gart_vm_start); - - RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + IGP_WRITE_MCIND(RS690_MC_AGP_BASE, + (unsigned int)dev_priv->gart_vm_start); + IGP_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + } else { + RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); + RADEON_WRITE(RS480_AGP_BASE_2, 0); + } dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16)); - RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp); + radeon_write_agp_location(dev_priv, temp); - temp = RS690_READ_MCIND(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); + temp = IGP_READ_MCIND(dev_priv, RS480_AGP_ADDRESS_SPACE_SIZE); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | + RS480_VA_SIZE_32MB)); do { - temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); - if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL); + if ((temp & RS480_GART_CACHE_INVALIDATE) == 0) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, - RS400_GART_CACHE_INVALIDATE); + IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, + RS480_GART_CACHE_INVALIDATE); do { - temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); - if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL); + if ((temp & RS480_GART_CACHE_INVALIDATE) == 0) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, 0); + IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, 0); } else { - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, 0); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, 0); } } @@ -749,12 +724,8 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) { u32 tmp; - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { - radeon_set_rs690gart(dev_priv, on); - return; - } - - if (dev_priv->flags & RADEON_IS_IGPGART) { + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + (dev_priv->flags & RADEON_IS_IGPGART)) { radeon_set_igpgart(dev_priv, on); return; } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index f25933e..3063b0f 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -122,7 +122,7 @@ enum radeon_family { CHIP_RV380, CHIP_R420, CHIP_RV410, - CHIP_RS400, + CHIP_RS480, CHIP_RS690, CHIP_RV515, CHIP_R520, @@ -459,9 +459,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_TX_GART_END_LO 0x16 #define RADEON_PCIE_TX_GART_END_HI 0x17 -#define RS400_NB_MC_INDEX 0x168 -# define RS400_NB_MC_IND_WR_EN (1 << 8) -#define RS400_NB_MC_DATA 0x16c +#define RS480_NB_MC_INDEX 0x168 +# define RS480_NB_MC_IND_WR_EN (1 << 8) +#define RS480_NB_MC_DATA 0x16c #define RS690_MC_INDEX 0x78 # define RS690_MC_INDEX_MASK 0x1ff @@ -470,46 +470,42 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS690_MC_DATA 0x7c /* MC indirect registers */ -#define RS400_MC_MISC_CNTL 0x18 -# define RS400_DISABLE_GTW (1 << 1) +#define RS480_MC_MISC_CNTL 0x18 +# define RS480_DISABLE_GTW (1 << 1) /* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */ -# define RS400_GART_INDEX_REG_EN (1 << 12) +# define RS480_GART_INDEX_REG_EN (1 << 12) # define RS690_BLOCK_GFX_D3_EN (1 << 14) -#define RS400_K8_FB_LOCATION 0x1e -#define RS400_GART_FEATURE_ID 0x2b -# define RS400_HANG_EN (1 << 11) -# define RS400_TLB_ENABLE (1 << 18) -# define RS400_P2P_ENABLE (1 << 19) -# define RS400_GTW_LAC_EN (1 << 25) -# define RS400_2LEVEL_GART (0 << 30) -# define RS400_1LEVEL_GART (1 << 30) -# define RS400_PDC_EN (1 << 31) -#define RS400_GART_BASE 0x2c -#define RS400_GART_CACHE_CNTRL 0x2e -# define RS400_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ -/* ??? */ -# define RS690_MC_GART_CLEAR_STATUS (1 << 1) -# define RS690_MC_GART_CLEAR_DONE (0 << 1) -# define RS690_MC_GART_CLEAR_PENDING (1 << 1) -#define RS400_AGP_ADDRESS_SPACE_SIZE 0x38 -# define RS400_GART_EN (1 << 0) -# define RS400_VA_SIZE_32MB (0 << 1) -# define RS400_VA_SIZE_64MB (1 << 1) -# define RS400_VA_SIZE_128MB (2 << 1) -# define RS400_VA_SIZE_256MB (3 << 1) -# define RS400_VA_SIZE_512MB (4 << 1) -# define RS400_VA_SIZE_1GB (5 << 1) -# define RS400_VA_SIZE_2GB (6 << 1) -#define RS400_AGP_MODE_CNTL 0x39 -# define RS400_POST_GART_Q_SIZE (1 << 18) -# define RS400_NONGART_SNOOP (1 << 19) -# define RS400_AGP_RD_BUF_SIZE (1 << 20) -# define RS400_REQ_TYPE_SNOOP_SHIFT 22 -# define RS400_REQ_TYPE_SNOOP_MASK 0x3 -# define RS400_REQ_TYPE_SNOOP_DIS (1 << 24) -#define RS400_MC_MISC_UMA_CNTL 0x5f -#define RS400_MC_MCLK_CNTL 0x7a -#define RS400_MC_UMA_DUALCH_CNTL 0x86 +#define RS480_K8_FB_LOCATION 0x1e +#define RS480_GART_FEATURE_ID 0x2b +# define RS480_HANG_EN (1 << 11) +# define RS480_TLB_ENABLE (1 << 18) +# define RS480_P2P_ENABLE (1 << 19) +# define RS480_GTW_LAC_EN (1 << 25) +# define RS480_2LEVEL_GART (0 << 30) +# define RS480_1LEVEL_GART (1 << 30) +# define RS480_PDC_EN (1 << 31) +#define RS480_GART_BASE 0x2c +#define RS480_GART_CACHE_CNTRL 0x2e +# define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ +#define RS480_AGP_ADDRESS_SPACE_SIZE 0x38 +# define RS480_GART_EN (1 << 0) +# define RS480_VA_SIZE_32MB (0 << 1) +# define RS480_VA_SIZE_64MB (1 << 1) +# define RS480_VA_SIZE_128MB (2 << 1) +# define RS480_VA_SIZE_256MB (3 << 1) +# define RS480_VA_SIZE_512MB (4 << 1) +# define RS480_VA_SIZE_1GB (5 << 1) +# define RS480_VA_SIZE_2GB (6 << 1) +#define RS480_AGP_MODE_CNTL 0x39 +# define RS480_POST_GART_Q_SIZE (1 << 18) +# define RS480_NONGART_SNOOP (1 << 19) +# define RS480_AGP_RD_BUF_SIZE (1 << 20) +# define RS480_REQ_TYPE_SNOOP_SHIFT 22 +# define RS480_REQ_TYPE_SNOOP_MASK 0x3 +# define RS480_REQ_TYPE_SNOOP_DIS (1 << 24) +#define RS480_MC_MISC_UMA_CNTL 0x5f +#define RS480_MC_MCLK_CNTL 0x7a +#define RS480_MC_UMA_DUALCH_CNTL 0x86 #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 @@ -529,8 +525,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 -#define RADEON_AGP_BASE_2 0x015c -#define RS400_AGP_BASE_2 0x0164 +#define RADEON_AGP_BASE_2 0x015c /* r200+ only */ +#define RS480_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 #define RADEON_RB3D_COLOROFFSET 0x1c40 @@ -1105,14 +1101,6 @@ do { \ RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \ } while (0) -#define RADEON_WRITE_IGPGART(addr, val) \ -do { \ - RADEON_WRITE(RS400_NB_MC_INDEX, \ - ((addr) & 0x7f) | RS400_NB_MC_IND_WR_EN); \ - RADEON_WRITE(RS400_NB_MC_DATA, (val)); \ - RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); \ -} while (0) - #define RADEON_WRITE_PCIE(addr, val) \ do { \ RADEON_WRITE8(RADEON_PCIE_INDEX, \ @@ -1120,12 +1108,20 @@ do { \ RADEON_WRITE(RADEON_PCIE_DATA, (val)); \ } while (0) -#define RADEON_WRITE_MCIND(addr, val) \ - do { \ - RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ - RADEON_WRITE(R520_MC_IND_DATA, (val)); \ - RADEON_WRITE(R520_MC_IND_INDEX, 0); \ - } while (0) +#define R500_WRITE_MCIND(addr, val) \ +do { \ + RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ + RADEON_WRITE(R520_MC_IND_DATA, (val)); \ + RADEON_WRITE(R520_MC_IND_INDEX, 0); \ +} while (0) + +#define RS480_WRITE_MCIND(addr, val) \ +do { \ + RADEON_WRITE(RS480_NB_MC_INDEX, \ + ((addr) & 0xff) | RS480_NB_MC_IND_WR_EN); \ + RADEON_WRITE(RS480_NB_MC_DATA, (val)); \ + RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); \ +} while (0) #define RS690_WRITE_MCIND(addr, val) \ do { \ @@ -1134,6 +1130,14 @@ do { \ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK); \ } while (0) +#define IGP_WRITE_MCIND(addr, val) \ +do { \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) \ + RS690_WRITE_MCIND(addr, val); \ + else \ + RS480_WRITE_MCIND(addr, val); \ +} while (0) + #define CP_PACKET0( reg, n ) \ (RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2)) #define CP_PACKET0_TABLE( reg, n ) \ -- cgit v0.10.2 From d7463eb41d88a39de2653fd41857c4ccddb8707b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:46:36 +1000 Subject: drm/radeon: write AGP_BASE_2 on chips that support it. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 3a42498..fc0820c 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -472,6 +472,8 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) + RADEON_WRITE(RADEON_AGP_BASE_2, 0); radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | -- cgit v0.10.2 From 259434acccbc823ee8bc00b2d2689ccccd25e1fd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:51:12 +1000 Subject: drm/radeon: fix pixcache and purge/cache flushing registers Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index 8f664af..a72c703 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -1346,7 +1346,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* Guess by Vladimir. * Set to 0A before 3D operations, set to 02 afterwards. */ -#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C +/*#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C*/ # define R300_RB3D_DSTCACHE_UNKNOWN_02 0x00000002 # define R300_RB3D_DSTCACHE_UNKNOWN_0A 0x0000000A diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index fc0820c..8fce12e 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -161,16 +161,36 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv) dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE; - tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT); - tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); - - for (i = 0; i < dev_priv->usec_timeout; i++) { - if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT) - & RADEON_RB3D_DC_BUSY)) { - return 0; + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { + tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + + for (i = 0; i < dev_priv->usec_timeout; i++) { + if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT) + & RADEON_RB3D_DC_BUSY)) { + return 0; + } + DRM_UDELAY(1); + } + } else { + /* 3D */ + tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp); + + /* 2D */ + tmp = RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + + for (i = 0; i < dev_priv->usec_timeout; i++) { + if (!(RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT) + & RADEON_RB3D_DC_BUSY)) { + return 0; + } + DRM_UDELAY(1); } - DRM_UDELAY(1); } #if RADEON_FIFO_DEBUG diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 3063b0f..5e6f4612 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -659,11 +659,18 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_RB3D_ZC_FREE (1 << 2) # define RADEON_RB3D_ZC_FLUSH_ALL 0x5 # define RADEON_RB3D_ZC_BUSY (1 << 31) +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZC_FLUSH (1 << 0) +# define R300_ZC_FREE (1 << 1) +# define R300_ZC_FLUSH_ALL 0x3 +# define R300_ZC_BUSY (1 << 31) #define RADEON_RB3D_DSTCACHE_CTLSTAT 0x325c # define RADEON_RB3D_DC_FLUSH (3 << 0) # define RADEON_RB3D_DC_FREE (3 << 2) # define RADEON_RB3D_DC_FLUSH_ALL 0xf # define RADEON_RB3D_DC_BUSY (1 << 31) +#define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c +# define R300_RB3D_DC_FINISH (1 << 4) #define RADEON_RB3D_ZSTENCILCNTL 0x1c2c # define RADEON_Z_TEST_MASK (7 << 4) # define RADEON_Z_TEST_ALWAYS (7 << 4) @@ -1178,23 +1185,43 @@ do { \ } while (0) #define RADEON_FLUSH_CACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_DC_FLUSH ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH); \ + } \ } while (0) #define RADEON_PURGE_CACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_DC_FLUSH_ALL ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + } \ } while (0) #define RADEON_FLUSH_ZCACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_ZC_FLUSH ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_ZC_FLUSH); \ + } else { \ + OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(R300_ZC_FLUSH); \ + } \ } while (0) #define RADEON_PURGE_ZCACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_ZC_FLUSH_ALL ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(R300_ZC_FLUSH_ALL); \ + } \ } while (0) /* ================================================================ -- cgit v0.10.2 From d396db321bcaec54345e7e9e87cea8482d6ae3a8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:54:06 +1000 Subject: drm/radeon: fixup radeon_do_engine_reset Cleanup do engine reset for different chip families. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 8fce12e..77bd90f 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -418,12 +418,13 @@ static void radeon_do_cp_stop(drm_radeon_private_t * dev_priv) static int radeon_do_engine_reset(struct drm_device * dev) { drm_radeon_private_t *dev_priv = dev->dev_private; - u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset; + u32 clock_cntl_index = 0, mclk_cntl = 0, rbbm_soft_reset; DRM_DEBUG("\n"); radeon_do_pixcache_flush(dev_priv); - if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) { + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) { + /* may need something similar for newer chips */ clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX); mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL); @@ -434,28 +435,30 @@ static int radeon_do_engine_reset(struct drm_device * dev) RADEON_FORCEON_YCLKB | RADEON_FORCEON_MC | RADEON_FORCEON_AIC)); + } - rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); - - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | - RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB)); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & - ~(RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB))); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - + rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); + + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | + RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB)); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & + ~(RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB))); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) { RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl); RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index); RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); -- cgit v0.10.2 From 5b92c4045eaa42441b7ec249a406e4110ea400d4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:57:40 +1000 Subject: drm/radeon: init pipe setup in kernel code. This inits the card pipes in the kernel and lets userspace getparam the correct setup. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 77bd90f..5991875 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -247,6 +247,50 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv) return -EBUSY; } +static void radeon_init_pipes(drm_radeon_private_t *dev_priv) +{ + uint32_t gb_tile_config, gb_pipe_sel = 0; + + /* RS4xx/RS6xx/R4xx/R5xx */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) { + gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT); + dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1; + } else { + /* R3xx */ + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) { + dev_priv->num_gb_pipes = 2; + } else { + /* R3Vxx */ + dev_priv->num_gb_pipes = 1; + } + } + DRM_INFO("Num pipes: %d\n", dev_priv->num_gb_pipes); + + gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16 /*| R300_SUBPIXEL_1_16*/); + + switch (dev_priv->num_gb_pipes) { + case 2: gb_tile_config |= R300_PIPE_COUNT_R300; break; + case 3: gb_tile_config |= R300_PIPE_COUNT_R420_3P; break; + case 4: gb_tile_config |= R300_PIPE_COUNT_R420; break; + default: + case 1: gb_tile_config |= R300_PIPE_COUNT_RV350; break; + } + + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { + RADEON_WRITE_PLL(R500_DYN_SCLK_PWMEM_PIPE, (1 | ((gb_pipe_sel >> 8) & 0xf) << 4)); + RADEON_WRITE(R500_SU_REG_DEST, ((1 << dev_priv->num_gb_pipes) - 1)); + } + RADEON_WRITE(R300_GB_TILE_CONFIG, gb_tile_config); + radeon_do_wait_for_idle(dev_priv); + RADEON_WRITE(R300_DST_PIPE_CONFIG, RADEON_READ(R300_DST_PIPE_CONFIG) | R300_PIPE_AUTO_CONFIG); + RADEON_WRITE(R300_RB2D_DSTCACHE_MODE, (RADEON_READ(R300_RB2D_DSTCACHE_MODE) | + R300_DC_AUTOFLUSH_ENABLE | + R300_DC_DC_DISABLE_IGNORE_PE)); + + +} + /* ================================================================ * CP control, initialization */ @@ -464,6 +508,10 @@ static int radeon_do_engine_reset(struct drm_device * dev) RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); } + /* setup the raster pipes */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300) + radeon_init_pipes(dev_priv); + /* Reset the CP ring */ radeon_do_cp_reset(dev_priv); diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index aab82e1..68b0608 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -669,6 +669,7 @@ typedef struct drm_radeon_indirect { #define RADEON_PARAM_CARD_TYPE 12 #define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */ #define RADEON_PARAM_FB_LOCATION 14 /* FB location */ +#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */ typedef struct drm_radeon_getparam { int param; diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 5e6f4612..c3615cf 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -307,6 +307,8 @@ typedef struct drm_radeon_private { /* starting from here on, data is preserved accross an open */ uint32_t flags; /* see radeon_chip_flags */ unsigned long fb_aper_offset; + + int num_gb_pipes; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { @@ -529,6 +531,27 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS480_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 +/* pipe config regs */ +#define R400_GB_PIPE_SELECT 0x402c +#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */ +#define R500_SU_REG_DEST 0x42c8 +#define R300_GB_TILE_CONFIG 0x4018 +# define R300_ENABLE_TILING (1 << 0) +# define R300_PIPE_COUNT_RV350 (0 << 1) +# define R300_PIPE_COUNT_R300 (3 << 1) +# define R300_PIPE_COUNT_R420_3P (6 << 1) +# define R300_PIPE_COUNT_R420 (7 << 1) +# define R300_TILE_SIZE_8 (0 << 4) +# define R300_TILE_SIZE_16 (1 << 4) +# define R300_TILE_SIZE_32 (2 << 4) +# define R300_SUBPIXEL_1_12 (0 << 16) +# define R300_SUBPIXEL_1_16 (1 << 16) +#define R300_DST_PIPE_CONFIG 0x170c +# define R300_PIPE_AUTO_CONFIG (1 << 31) +#define R300_RB2D_DSTCACHE_MODE 0x3428 +# define R300_DC_AUTOFLUSH_ENABLE (1 << 8) +# define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17) + #define RADEON_RB3D_COLOROFFSET 0x1c40 #define RADEON_RB3D_COLORPITCH 0x1c48 diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index 6f75512..eee1357 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -3037,6 +3037,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil case RADEON_PARAM_FB_LOCATION: value = radeon_read_fb_location(dev_priv); break; + case RADEON_PARAM_NUM_GB_PIPES: + value = dev_priv->num_gb_pipes; + break; default: DRM_DEBUG("Invalid parameter %d\n", param->param); return -EINVAL; -- cgit v0.10.2 From c0beb2a723d69934a53f51a9d664c5b1dbbf634b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 13:52:28 +1000 Subject: drm/radeon: add initial r500 support. This contains all the command buffer processing for the r500 cards. It doesn't yet contain vblank support. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index f535812..329733a 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -189,18 +189,12 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_RE_CULL_CNTL, 1); ADD_RANGE(0x42C0, 2); ADD_RANGE(R300_RS_CNTL_0, 2); - ADD_RANGE(R300_RS_INTERP_0, 8); - ADD_RANGE(R300_RS_ROUTE_0, 8); + ADD_RANGE(0x43A4, 2); ADD_RANGE(0x43E8, 1); - ADD_RANGE(R300_PFS_CNTL_0, 3); - ADD_RANGE(R300_PFS_NODE_0, 4); - ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(0x46A4, 5); - ADD_RANGE(R300_PFS_INSTR0_0, 64); - ADD_RANGE(R300_PFS_INSTR1_0, 64); - ADD_RANGE(R300_PFS_INSTR2_0, 64); - ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(R300_RE_FOG_STATE, 1); ADD_RANGE(R300_FOG_COLOR_R, 3); ADD_RANGE(R300_PP_ALPHA_TEST, 2); @@ -241,7 +235,25 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { - ADD_RANGE(0x4074, 16); + ADD_RANGE(R500_VAP_INDEX_OFFSET, 1); + ADD_RANGE(R500_US_CONFIG, 2); + ADD_RANGE(R500_US_CODE_ADDR, 3); + ADD_RANGE(R500_US_FC_CTRL, 1); + ADD_RANGE(R500_RS_IP_0, 16); + ADD_RANGE(R500_RS_INST_0, 16); + ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2); + ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2); + } else { + ADD_RANGE(R300_PFS_CNTL_0, 3); + ADD_RANGE(R300_PFS_NODE_0, 4); + ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(R300_PFS_INSTR0_0, 64); + ADD_RANGE(R300_PFS_INSTR1_0, 64); + ADD_RANGE(R300_PFS_INSTR2_0, 64); + ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(R300_RS_INTERP_0, 8); + ADD_RANGE(R300_RS_ROUTE_0, 8); + } } @@ -829,6 +841,54 @@ static int r300_scratch(drm_radeon_private_t *dev_priv, } /** + * Uploads user-supplied vertex program instructions or parameters onto + * the graphics card. + * Called by r300_do_cp_cmdbuf. + */ +static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, + drm_radeon_kcmd_buffer_t *cmdbuf, + drm_r300_cmd_header_t header) +{ + int sz; + int addr; + int type; + int clamp; + int stride; + RING_LOCALS; + + sz = header.r500fp.count; + /* address is 9 bits 0 - 8, bit 1 of flags is part of address */ + addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo; + + type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE); + clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); + + addr |= (type << 16); + addr |= (clamp << 17); + + stride = type ? 4 : 6; + + DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type); + if (!sz) + return 0; + if (sz * stride * 4 > cmdbuf->bufsz) + return -EINVAL; + + BEGIN_RING(3 + sz * stride); + OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr); + OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1)); + OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride); + + ADVANCE_RING(); + + cmdbuf->buf += sz * stride * 4; + cmdbuf->bufsz -= sz * stride * 4; + + return 0; +} + + +/** * Parses and validates a user-supplied command buffer and emits appropriate * commands on the DMA ring buffer. * Called by the ioctl handler function radeon_cp_cmdbuf. @@ -963,6 +1023,19 @@ int r300_do_cp_cmdbuf(struct drm_device *dev, } break; + case R300_CMD_R500FP: + if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) { + DRM_ERROR("Calling r500 command on r300 card\n"); + ret = -EINVAL; + goto cleanup; + } + DRM_DEBUG("R300_CMD_R500FP\n"); + ret = r300_emit_r500fp(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_r500fp failed\n"); + goto cleanup; + } + break; default: DRM_ERROR("bad cmd_type %i at %p\n", header.header.cmd_type, diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a72c703..a883d10 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -1623,4 +1623,20 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. */ #define R300_CP_CMD_BITBLT_MULTI 0xC0009B00 +#define R500_VAP_INDEX_OFFSET 0x208c + +#define R500_GA_US_VECTOR_INDEX 0x4250 +#define R500_GA_US_VECTOR_DATA 0x4254 + +#define R500_RS_IP_0 0x4074 +#define R500_RS_INST_0 0x4320 + +#define R500_US_CONFIG 0x4600 + +#define R500_US_FC_CTRL 0x4624 +#define R500_US_CODE_ADDR 0x4630 + +#define R500_RB3D_COLOR_CLEAR_VALUE_AR 0x46c0 +#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8 + #endif /* _R300_REG_H */ diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index 68b0608..73ff51f 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -240,6 +240,7 @@ typedef union { # define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8 #define R300_CMD_SCRATCH 8 +#define R300_CMD_R500FP 9 typedef union { unsigned int u; @@ -268,6 +269,9 @@ typedef union { struct { unsigned char cmd_type, reg, n_bufs, flags; } scratch; + struct { + unsigned char cmd_type, count, adrlo, adrhi_flags; + } r500fp; } drm_r300_cmd_header_t; #define RADEON_FRONT 0x1 @@ -278,6 +282,9 @@ typedef union { #define RADEON_USE_HIERZ 0x40000000 #define RADEON_USE_COMP_ZBUF 0x20000000 +#define R500FP_CONSTANT_TYPE (1 << 1) +#define R500FP_CONSTANT_CLAMP (1 << 2) + /* Primitive types */ #define RADEON_POINTS 0x1 diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index c3615cf..d0dc47c 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -38,7 +38,7 @@ #define DRIVER_NAME "radeon" #define DRIVER_DESC "ATI Radeon" -#define DRIVER_DATE "20060524" +#define DRIVER_DATE "20080528" /* Interface history: * @@ -98,9 +98,10 @@ * 1.26- Add support for variable size PCI(E) gart aperture * 1.27- Add support for IGP GART * 1.28- Add support for VBL on CRTC2 + * 1.29- R500 3D cmd buffer support */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 28 +#define DRIVER_MINOR 29 #define DRIVER_PATCHLEVEL 0 /* @@ -294,6 +295,7 @@ typedef struct drm_radeon_private { int vblank_crtc; uint32_t irq_enable_reg; int irq_enabled; + uint32_t r500_disp_irq_reg; struct radeon_surface surfaces[RADEON_MAX_SURFACES]; struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES]; @@ -1103,6 +1105,31 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define R200_VAP_PVS_CNTL_1 0x22D0 +#define R500_D1CRTC_STATUS 0x609c +#define R500_D2CRTC_STATUS 0x689c +#define R500_CRTC_V_BLANK (1<<0) + +#define R500_D1CRTC_FRAME_COUNT 0x60a4 +#define R500_D2CRTC_FRAME_COUNT 0x68a4 + +#define R500_D1MODE_V_COUNTER 0x6530 +#define R500_D2MODE_V_COUNTER 0x6d30 + +#define R500_D1MODE_VBLANK_STATUS 0x6534 +#define R500_D2MODE_VBLANK_STATUS 0x6d34 +#define R500_VBLANK_OCCURED (1<<0) +#define R500_VBLANK_ACK (1<<4) +#define R500_VBLANK_STAT (1<<12) +#define R500_VBLANK_INT (1<<16) + +#define R500_DxMODE_INT_MASK 0x6540 +#define R500_D1MODE_INT_MASK (1<<0) +#define R500_D2MODE_INT_MASK (1<<8) + +#define R500_DISP_INTERRUPT_STATUS 0x7edc +#define R500_D1_VBLANK_INTERRUPT (1 << 4) +#define R500_D2_VBLANK_INTERRUPT (1 << 5) + /* Constants */ #define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */ -- cgit v0.10.2 From 9156cf09f56150ed89f77eaa4c386a07789776a0 Mon Sep 17 00:00:00 2001 From: Roland Scheidegger Date: Thu, 19 Jun 2008 11:36:04 +1000 Subject: drm/radeon: fix texture uploads with large 3d textures (bug 13980) Texture uploads could hit the blitter coordinate limit, adjust the texture offset when uploading the pieces. Make sure to check the end address of the upload too. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index eee1357..11c146b 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -1662,7 +1662,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, u32 height; int i; u32 texpitch, microtile; - u32 offset; + u32 offset, byte_offset; RING_LOCALS; if (radeon_check_and_fixup_offset(dev_priv, file_priv, &tex->offset)) { @@ -1727,6 +1727,13 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, } else microtile = 0; + /* this might fail for zero-sized uploads - are those illegal? */ + if (!radeon_check_offset(dev_priv, tex->offset + image->height * + blit_width - 1)) { + DRM_ERROR("Invalid final destination offset\n"); + return -EINVAL; + } + DRM_DEBUG("tex=%dx%d blit=%d\n", tex_width, tex->height, blit_width); do { @@ -1840,6 +1847,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, } #undef RADEON_COPY_MT + byte_offset = (image->y & ~2047) * blit_width; buf->file_priv = file_priv; buf->used = size; offset = dev_priv->gart_buffers_offset + buf->offset; @@ -1854,9 +1862,9 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, RADEON_DP_SRC_SOURCE_MEMORY | RADEON_GMC_CLR_CMP_CNTL_DIS | RADEON_GMC_WR_MSK_DIS); OUT_RING((spitch << 22) | (offset >> 10)); - OUT_RING((texpitch << 22) | (tex->offset >> 10)); + OUT_RING((texpitch << 22) | ((tex->offset >> 10) + (byte_offset >> 10))); OUT_RING(0); - OUT_RING((image->x << 16) | image->y); + OUT_RING((image->x << 16) | (image->y % 2048)); OUT_RING((image->width << 16) | height); RADEON_WAIT_UNTIL_2D_IDLE(); ADVANCE_RING(); -- cgit v0.10.2 From 70b13d510fc9d137e362b7db3ac5b14b50d78477 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 11:40:44 +1000 Subject: drm/r500: add support for AGP based cards. AGP registers weren't programmed properly for r500 cards. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 5991875..f5e22bf 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -113,6 +113,27 @@ static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_lo RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc); } +static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) +{ + u32 agp_base_hi = upper_32_bits(agp_base); + u32 agp_base_lo = agp_base & 0xffffffff; + + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) { + R500_WRITE_MCIND(RV515_MC_AGP_BASE, agp_base_lo); + R500_WRITE_MCIND(RV515_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + RS690_WRITE_MCIND(RS690_MC_AGP_BASE, agp_base_lo); + RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) { + R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo); + R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi); + } else { + RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) + RADEON_WRITE(RADEON_AGP_BASE_2, agp_base_hi); + } +} + static int RADEON_READ_PLL(struct drm_device * dev, int addr) { drm_radeon_private_t *dev_priv = dev->dev_private; @@ -542,9 +563,8 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) - RADEON_WRITE(RADEON_AGP_BASE_2, 0); + radeon_write_agp_base(dev_priv, dev->agp->base); + radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index d0dc47c..f43e1f9 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -522,9 +522,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RV515_MC_FB_LOCATION 0x01 #define RV515_MC_AGP_LOCATION 0x02 +#define RV515_MC_AGP_BASE 0x03 +#define RV515_MC_AGP_BASE_2 0x04 #define R520_MC_FB_LOCATION 0x04 #define R520_MC_AGP_LOCATION 0x05 +#define R520_MC_AGP_BASE 0x06 +#define R520_MC_AGP_BASE_2 0x07 #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 -- cgit v0.10.2 From 7ecabc53a29bb31689fa1852a926e021179a64a6 Mon Sep 17 00:00:00 2001 From: Dennis Kasprzyk Date: Thu, 19 Jun 2008 12:36:55 +1000 Subject: drm/radeon: Restore sw interrupt on resume Fixes performance drop after suspend/resume on some systems. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index f5e22bf..d4feccb 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1292,6 +1292,7 @@ static int radeon_do_resume_cp(struct drm_device * dev) radeon_cp_init_ring_buffer(dev, dev_priv); radeon_do_engine_reset(dev); + radeon_enable_interrupt(dev); DRM_DEBUG("radeon_do_resume_cp() complete\n"); diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index f43e1f9..e20b5d8 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -386,6 +386,7 @@ extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS); extern void radeon_driver_irq_preinstall(struct drm_device * dev); extern void radeon_driver_irq_postinstall(struct drm_device * dev); extern void radeon_driver_irq_uninstall(struct drm_device * dev); +extern void radeon_enable_interrupt(struct drm_device *dev); extern int radeon_vblank_crtc_get(struct drm_device *dev); extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value); diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c index 009af38..ee40d19 100644 --- a/drivers/char/drm/radeon_irq.c +++ b/drivers/char/drm/radeon_irq.c @@ -234,7 +234,7 @@ int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_pr return radeon_wait_irq(dev, irqwait->irq_seq); } -static void radeon_enable_interrupt(struct drm_device *dev) +void radeon_enable_interrupt(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; -- cgit v0.10.2 From 5cfb6956073a9e42d44a26790b7800980634d037 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Jun 2008 12:38:29 +1000 Subject: drm/radeon: switch IGP gart to use radeon_write_agp_base() Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index d4feccb..441645e 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -127,6 +127,9 @@ static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) { R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo); R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480) { + RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); + RADEON_WRITE(RS480_AGP_BASE_2, 0); } else { RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) @@ -741,14 +744,7 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) | RS480_REQ_TYPE_SNOOP_DIS)); - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { - IGP_WRITE_MCIND(RS690_MC_AGP_BASE, - (unsigned int)dev_priv->gart_vm_start); - IGP_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); - } else { - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); - RADEON_WRITE(RS480_AGP_BASE_2, 0); - } + radeon_write_agp_base(dev_priv, dev_priv->gart_vm_start); dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & -- cgit v0.10.2 From 5e35eff13f7dd0f5c1d82b3b4708b2f7a5f44113 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Jun 2008 12:39:23 +1000 Subject: drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 441645e..e53158f 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -204,12 +204,12 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv) RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp); /* 2D */ - tmp = RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT); + tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT); tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp); for (i = 0; i < dev_priv->usec_timeout; i++) { - if (!(RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT) + if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT) & RADEON_RB3D_DC_BUSY)) { return 0; } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index e20b5d8..3f0eca9 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -662,11 +662,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PP_TXFILTER_1 0x1c6c #define RADEON_PP_TXFILTER_2 0x1c84 -#define RADEON_RB2D_DSTCACHE_CTLSTAT 0x342c -# define RADEON_RB2D_DC_FLUSH (3 << 0) -# define RADEON_RB2D_DC_FREE (3 << 2) -# define RADEON_RB2D_DC_FLUSH_ALL 0xf -# define RADEON_RB2D_DC_BUSY (1 << 31) +#define R300_RB2D_DSTCACHE_CTLSTAT 0x342c /* use R300_DSTCACHE_CTLSTAT */ +#define R300_DSTCACHE_CTLSTAT 0x1714 +# define R300_RB2D_DC_FLUSH (3 << 0) +# define R300_RB2D_DC_FREE (3 << 2) +# define R300_RB2D_DC_FLUSH_ALL 0xf +# define R300_RB2D_DC_BUSY (1 << 31) #define RADEON_RB3D_CNTL 0x1c3c # define RADEON_ALPHA_BLEND_ENABLE (1 << 0) # define RADEON_PLANE_MASK_ENABLE (1 << 1) -- cgit v0.10.2 From 21efa2bac91b8d12064617c5a35492ec982544eb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 13:01:58 +1000 Subject: drm/radeon: add hier-z registers for r300 and r500 chipsets diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index 329733a..702df45 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -190,7 +190,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(0x42C0, 2); ADD_RANGE(R300_RS_CNTL_0, 2); - ADD_RANGE(0x43A4, 2); + ADD_RANGE(R300_SC_HYPERZ, 2); ADD_RANGE(0x43E8, 1); ADD_RANGE(0x46A4, 5); @@ -209,14 +209,12 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(0x4E50, 9); ADD_RANGE(0x4E88, 1); ADD_RANGE(0x4EA0, 2); - ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3); - ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4); - ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ - ADD_RANGE(R300_RB3D_DEPTHPITCH, 1); - ADD_RANGE(0x4F28, 1); - ADD_RANGE(0x4F30, 2); - ADD_RANGE(0x4F44, 1); - ADD_RANGE(0x4F54, 1); + ADD_RANGE(R300_ZB_CNTL, 3); + ADD_RANGE(R300_ZB_FORMAT, 4); + ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ + ADD_RANGE(R300_ZB_DEPTHPITCH, 1); + ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1); + ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13); ADD_RANGE(R300_TX_FILTER_0, 16); ADD_RANGE(R300_TX_FILTER1_0, 16); @@ -229,7 +227,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_TX_BORDER_COLOR_0, 16); /* Sporadic registers used as primitives are emitted */ - ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1); + ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1); ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1); ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8); ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); @@ -243,6 +241,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R500_RS_INST_0, 16); ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2); ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2); + ADD_RANGE(R500_ZB_FIFO_SIZE, 2); } else { ADD_RANGE(R300_PFS_CNTL_0, 3); ADD_RANGE(R300_PFS_NODE_0, 4); @@ -719,8 +718,9 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv) BEGIN_RING(6); OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A); - OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0)); - OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03); + OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); + OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE| + R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE); OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0)); OUT_RING(0x0); ADVANCE_RING(); diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a883d10..a6802f2 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -702,6 +702,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) /* END: Rasterization / Interpolators - many guesses */ +/* Hierarchical Z Enable */ +#define R300_SC_HYPERZ 0x43a4 +# define R300_SC_HYPERZ_DISABLE (0 << 0) +# define R300_SC_HYPERZ_ENABLE (1 << 0) +# define R300_SC_HYPERZ_MIN (0 << 1) +# define R300_SC_HYPERZ_MAX (1 << 1) +# define R300_SC_HYPERZ_ADJ_256 (0 << 2) +# define R300_SC_HYPERZ_ADJ_128 (1 << 2) +# define R300_SC_HYPERZ_ADJ_64 (2 << 2) +# define R300_SC_HYPERZ_ADJ_32 (3 << 2) +# define R300_SC_HYPERZ_ADJ_16 (4 << 2) +# define R300_SC_HYPERZ_ADJ_8 (5 << 2) +# define R300_SC_HYPERZ_ADJ_4 (6 << 2) +# define R300_SC_HYPERZ_ADJ_2 (7 << 2) +# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5) +# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5) +# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6) +# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6) + +#define R300_SC_EDGERULE 0x43a8 + /* BEGIN: Scissors and cliprects */ /* There are four clipping rectangles. Their corner coordinates are inclusive. @@ -1355,19 +1376,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * for this. * Bit (1<<8) is the "test" bit. so plain write is 6 - vd */ -#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00 -# define R300_RB3D_Z_DISABLED_1 0x00000010 -# define R300_RB3D_Z_DISABLED_2 0x00000014 -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 - -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 -# define R300_RB3D_STENCIL_ENABLE 0x00000001 - -#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04 +#define R300_ZB_CNTL 0x4F00 +# define R300_STENCIL_ENABLE (1 << 0) +# define R300_Z_ENABLE (1 << 1) +# define R300_Z_WRITE_ENABLE (1 << 2) +# define R300_Z_SIGNED_COMPARE (1 << 3) +# define R300_STENCIL_FRONT_BACK (1 << 4) + +#define R300_ZB_ZSTENCILCNTL 0x4f04 /* functions */ # define R300_ZS_NEVER 0 # define R300_ZS_LESS 1 @@ -1387,52 +1403,166 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ZS_INVERT 5 # define R300_ZS_INCR_WRAP 6 # define R300_ZS_DECR_WRAP 7 +# define R300_Z_FUNC_SHIFT 0 /* front and back refer to operations done for front and back faces, i.e. separate stencil function support */ -# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0 -# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3 -# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6 -# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9 -# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12 -# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15 -# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18 -# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21 -# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24 - -#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08 -# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0 -# define R300_RB3D_ZS2_STENCIL_MASK 0xFF -# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8 -# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16 +# define R300_S_FRONT_FUNC_SHIFT 3 +# define R300_S_FRONT_SFAIL_OP_SHIFT 6 +# define R300_S_FRONT_ZPASS_OP_SHIFT 9 +# define R300_S_FRONT_ZFAIL_OP_SHIFT 12 +# define R300_S_BACK_FUNC_SHIFT 15 +# define R300_S_BACK_SFAIL_OP_SHIFT 18 +# define R300_S_BACK_ZPASS_OP_SHIFT 21 +# define R300_S_BACK_ZFAIL_OP_SHIFT 24 + +#define R300_ZB_STENCILREFMASK 0x4f08 +# define R300_STENCILREF_SHIFT 0 +# define R300_STENCILREF_MASK 0x000000ff +# define R300_STENCILMASK_SHIFT 8 +# define R300_STENCILMASK_MASK 0x0000ff00 +# define R300_STENCILWRITEMASK_SHIFT 16 +# define R300_STENCILWRITEMASK_MASK 0x00ff0000 /* gap */ -#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10 -# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0) -# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0) - /* 16 bit format or some aditional bit ? */ -# define R300_DEPTH_FORMAT_UNK32 (32 << 0) +#define R300_ZB_FORMAT 0x4f10 +# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0) +# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0) +# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0) +/* reserved up to (15 << 0) */ +# define R300_INVERT_13E3_LEADING_ONES (0 << 4) +# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4) -#define R300_RB3D_EARLY_Z 0x4F14 -# define R300_EARLY_Z_DISABLE (0 << 0) -# define R300_EARLY_Z_ENABLE (1 << 0) +#define R300_ZB_ZTOP 0x4F14 +# define R300_ZTOP_DISABLE (0 << 0) +# define R300_ZTOP_ENABLE (1 << 0) /* gap */ -#define R300_RB3D_ZCACHE_CTLSTAT 0x4F18 /* GUESS */ -# define R300_RB3D_ZCACHE_UNKNOWN_01 0x1 -# define R300_RB3D_ZCACHE_UNKNOWN_03 0x3 +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31) + +#define R300_ZB_BW_CNTL 0x4f1c +# define R300_HIZ_DISABLE (0 << 0) +# define R300_HIZ_ENABLE (1 << 0) +# define R300_HIZ_MIN (0 << 1) +# define R300_HIZ_MAX (1 << 1) +# define R300_FAST_FILL_DISABLE (0 << 2) +# define R300_FAST_FILL_ENABLE (1 << 2) +# define R300_RD_COMP_DISABLE (0 << 3) +# define R300_RD_COMP_ENABLE (1 << 3) +# define R300_WR_COMP_DISABLE (0 << 4) +# define R300_WR_COMP_ENABLE (1 << 4) +# define R300_ZB_CB_CLEAR_RMW (0 << 5) +# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6) + +# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7) +# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7) +# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8) +# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8) + +# define R500_BMASK_ENABLE (0 << 10) +# define R500_BMASK_DISABLE (1 << 10) +# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11) +# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11) +# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12) +# define R500_HIZ_FP_EXP_BITS_1 (1 << 12) +# define R500_HIZ_FP_EXP_BITS_2 (2 << 12) +# define R500_HIZ_FP_EXP_BITS_3 (3 << 12) +# define R500_HIZ_FP_EXP_BITS_4 (4 << 12) +# define R500_HIZ_FP_EXP_BITS_5 (5 << 12) +# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15) +# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15) +# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16) +# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16) +# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17) +# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17) +# define R500_PEQ_PACKING_DISABLE (0 << 18) +# define R500_PEQ_PACKING_ENABLE (1 << 18) +# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18) +# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18) + /* gap */ -#define R300_RB3D_DEPTHOFFSET 0x4F20 -#define R300_RB3D_DEPTHPITCH 0x4F24 -# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */ -# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */ -# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */ -# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */ +/* Z Buffer Address Offset. + * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles. + */ +#define R300_ZB_DEPTHOFFSET 0x4f20 + +/* Z Buffer Pitch and Endian Control */ +#define R300_ZB_DEPTHPITCH 0x4f24 +# define R300_DEPTHPITCH_MASK 0x00003FFC +# define R300_DEPTHMACROTILE_DISABLE (0 << 16) +# define R300_DEPTHMACROTILE_ENABLE (1 << 16) +# define R300_DEPTHMICROTILE_LINEAR (0 << 17) +# define R300_DEPTHMICROTILE_TILED (1 << 17) +# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17) +# define R300_DEPTHENDIAN_NO_SWAP (0 << 18) +# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18) +# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18) +# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18) + +/* Z Buffer Clear Value */ +#define R300_ZB_DEPTHCLEARVALUE 0x4f28 + +#define R300_ZB_ZMASK_OFFSET 0x4f30 +#define R300_ZB_ZMASK_PITCH 0x4f34 +#define R300_ZB_ZMASK_WRINDEX 0x4f38 +#define R300_ZB_ZMASK_DWORD 0x4f3c +#define R300_ZB_ZMASK_RDINDEX 0x4f40 + +/* Hierarchical Z Memory Offset */ +#define R300_ZB_HIZ_OFFSET 0x4f44 + +/* Hierarchical Z Write Index */ +#define R300_ZB_HIZ_WRINDEX 0x4f48 + +/* Hierarchical Z Data */ +#define R300_ZB_HIZ_DWORD 0x4f4c + +/* Hierarchical Z Read Index */ +#define R300_ZB_HIZ_RDINDEX 0x4f50 + +/* Hierarchical Z Pitch */ +#define R300_ZB_HIZ_PITCH 0x4f54 + +/* Z Buffer Z Pass Counter Data */ +#define R300_ZB_ZPASS_DATA 0x4f58 + +/* Z Buffer Z Pass Counter Address */ +#define R300_ZB_ZPASS_ADDR 0x4f5c + +/* Depth buffer X and Y coordinate offset */ +#define R300_ZB_DEPTHXY_OFFSET 0x4f60 +# define R300_DEPTHX_OFFSET_SHIFT 1 +# define R300_DEPTHX_OFFSET_MASK 0x000007FE +# define R300_DEPTHY_OFFSET_SHIFT 17 +# define R300_DEPTHY_OFFSET_MASK 0x07FE0000 + +/* Sets the fifo sizes */ +#define R500_ZB_FIFO_SIZE 0x4fd0 +# define R500_OP_FIFO_SIZE_FULL (0 << 0) +# define R500_OP_FIFO_SIZE_HALF (1 << 0) +# define R500_OP_FIFO_SIZE_QUATER (2 << 0) +# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0) + +/* Stencil Reference Value and Mask for backfacing quads */ +/* R300_ZB_STENCILREFMASK handles front face */ +#define R500_ZB_STENCILREFMASK_BF 0x4fd4 +# define R500_STENCILREF_SHIFT 0 +# define R500_STENCILREF_MASK 0x000000ff +# define R500_STENCILMASK_SHIFT 8 +# define R500_STENCILMASK_MASK 0x0000ff00 +# define R500_STENCILWRITEMASK_SHIFT 16 +# define R500_STENCILWRITEMASK_MASK 0x00ff0000 /* BEGIN: Vertex program instruction set */ -- cgit v0.10.2 From 598d14482380312939a3e3a4ae0657eb6b50a532 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 19 Jun 2008 14:00:37 +1000 Subject: [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset This adds missing stolen memory size detect for IGD_GM, be sure to detect right size as current X intel driver (2.3.2) which has already worked out. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 0235659..e73f8f0 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -567,13 +567,13 @@ static void intel_i830_init_gtt_entries(void) gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_128M: - if (IS_G33) + if (IS_G33 || IS_I965) gtt_entries = MB(128) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_256M: - if (IS_G33) + if (IS_G33 || IS_I965) gtt_entries = MB(256) - KB(size); else gtt_entries = 0; -- cgit v0.10.2 From 25ce77abf8be3a96b3673e46722a9bd05f149584 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 19 Jun 2008 14:17:58 +1000 Subject: [AGP] intel_agp: Add support for Intel 4 series chipsets Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index e73f8f0..b52988d 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -34,6 +34,12 @@ #define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2 #define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40 #define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42 +#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00 +#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02 +#define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10 +#define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12 +#define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20 +#define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22 /* cover 915 and 945 variants */ #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ @@ -55,6 +61,10 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB) +#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB) + extern int agp_memory_reserved; @@ -80,8 +90,13 @@ extern int agp_memory_reserved; #define I915_PTEADDR 0x1C #define I915_GMCH_GMS_STOLEN_48M (0x6 << 4) #define I915_GMCH_GMS_STOLEN_64M (0x7 << 4) -#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) -#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) +#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4) +#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4) +#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4) +#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) + #define I915_IFPADDR 0x60 /* Intel 965G registers */ @@ -506,6 +521,10 @@ static void intel_i830_init_gtt_entries(void) size = 512; } size += 4; + } else if (IS_G4X) { + /* On 4 series hardware, GTT stolen is separate from graphics + * stolen, ignore it in stolen gtt entries counting */ + size = 0; } else { /* On previous hardware, the GTT size was just what was * required to map the aperture. @@ -554,30 +573,54 @@ static void intel_i830_init_gtt_entries(void) break; case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; break; case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_128M: - if (IS_G33 || IS_I965) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(128) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_256M: - if (IS_G33 || IS_I965) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(256) - KB(size); else gtt_entries = 0; break; + case INTEL_GMCH_GMS_STOLEN_96M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(96) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_160M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(160) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_224M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(224) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_352M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(352) - KB(size); + else + gtt_entries = 0; + break; default: gtt_entries = 0; break; @@ -1136,6 +1179,20 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge, return addr | bridge->driver->masks[type].mask; } +static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) +{ + switch (agp_bridge->dev->device) { + case PCI_DEVICE_ID_INTEL_IGD_HB: + case PCI_DEVICE_ID_INTEL_IGD_E_HB: + case PCI_DEVICE_ID_INTEL_Q45_HB: + case PCI_DEVICE_ID_INTEL_G45_HB: + *gtt_offset = *gtt_size = MB(2); + break; + default: + *gtt_offset = *gtt_size = KB(512); + } +} + /* The intel i965 automatically initializes the agp aperture during POST. * Use the memory already set aside for in the GTT. */ @@ -1156,10 +1213,7 @@ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) temp &= 0xfff00000; - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB) - gtt_offset = gtt_size = MB(2); - else - gtt_offset = gtt_size = KB(512); + intel_i965_get_gtt_range(>t_offset, >t_size); intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); @@ -2065,6 +2119,12 @@ static const struct intel_driver_description { NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0, "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0, + "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0, + "Q45/Q43", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0, + "G45/G43", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2256,6 +2316,9 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_Q35_HB), ID(PCI_DEVICE_ID_INTEL_Q33_HB), ID(PCI_DEVICE_ID_INTEL_IGD_HB), + ID(PCI_DEVICE_ID_INTEL_IGD_E_HB), + ID(PCI_DEVICE_ID_INTEL_Q45_HB), + ID(PCI_DEVICE_ID_INTEL_G45_HB), { } }; -- cgit v0.10.2 From 62c96b9d0917894c164aa3e474a3ff3bca1554ae Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:27:53 +1000 Subject: agp/intel: cleanup some serious whitespace badness Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index b52988d..30aa01b 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1198,45 +1198,45 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) */ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) { - int page_order; - struct aper_size_info_fixed *size; - int num_entries; - u32 temp; - int gtt_offset, gtt_size; + int page_order; + struct aper_size_info_fixed *size; + int num_entries; + u32 temp; + int gtt_offset, gtt_size; - size = agp_bridge->current_size; - page_order = size->page_order; - num_entries = size->num_entries; - agp_bridge->gatt_table_real = NULL; + size = agp_bridge->current_size; + page_order = size->page_order; + num_entries = size->num_entries; + agp_bridge->gatt_table_real = NULL; - pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); + pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); - temp &= 0xfff00000; + temp &= 0xfff00000; intel_i965_get_gtt_range(>t_offset, >t_size); - intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); + intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); - if (!intel_private.gtt) - return -ENOMEM; + if (!intel_private.gtt) + return -ENOMEM; - intel_private.registers = ioremap(temp, 128 * 4096); - if (!intel_private.registers) { + intel_private.registers = ioremap(temp, 128 * 4096); + if (!intel_private.registers) { iounmap(intel_private.gtt); return -ENOMEM; } - temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; - global_cache_flush(); /* FIXME: ? */ + temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; + global_cache_flush(); /* FIXME: ? */ - /* we have to call this as early as possible after the MMIO base address is known */ - intel_i830_init_gtt_entries(); + /* we have to call this as early as possible after the MMIO base address is known */ + intel_i830_init_gtt_entries(); - agp_bridge->gatt_table = NULL; + agp_bridge->gatt_table = NULL; - agp_bridge->gatt_bus_addr = temp; + agp_bridge->gatt_bus_addr = temp; - return 0; + return 0; } @@ -1753,7 +1753,7 @@ static const struct agp_bridge_driver intel_815_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = agp_generic_type_to_mask_type, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static const struct agp_bridge_driver intel_830_driver = { @@ -1954,28 +1954,26 @@ static const struct agp_bridge_driver intel_915_driver = { }; static const struct agp_bridge_driver intel_i965_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = true, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i965_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i965_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; @@ -2004,28 +2002,28 @@ static const struct agp_bridge_driver intel_7505_driver = { }; static const struct agp_bridge_driver intel_g33_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = true, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i915_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i915_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; -- cgit v0.10.2 From 0e480e5fc03c411d350478b2e8dc0906a37b6f07 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:57:31 +1000 Subject: agp: brown paper bag patch - put back the two lines it took out. no more whitespace diffs for me. Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30aa01b..1ae64bb 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1959,6 +1959,8 @@ static const struct agp_bridge_driver intel_i965_driver = { .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, .mask_memory = intel_i965_mask_memory, -- cgit v0.10.2 From 9bedbcb207ed9a571b239231d99c8fd4a34ae24d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:57:31 +1000 Subject: agp: brown paper bag patch - put back two lines that got lost Commit 62c96b9d0917894c164aa3e474a3ff3bca1554ae ("agp/intel: cleanup some serious whitespace badness") didn't just fix whitespace. It also lost two lines. Noticed by Linus. No more whitespace diffs for me. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30aa01b..1ae64bb 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1959,6 +1959,8 @@ static const struct agp_bridge_driver intel_i965_driver = { .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, .mask_memory = intel_i965_mask_memory, -- cgit v0.10.2 From 49307fd6f72bdd68cc2bd23e7da0bcfecf8087c9 Mon Sep 17 00:00:00 2001 From: Dario Faggioli Date: Wed, 18 Jun 2008 09:18:38 +0200 Subject: sched: NULL pointer dereference while setting sched_rt_period_us MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_RT_GROUP_SCHED and CONFIG_CGROUP_SCHED are enabled, with: echo 10000 > /proc/sys/kernel/sched_rt_period_us We get this: BUG: unable to handle kernel NULL pointer dereference at 0000008c [ 947.682233] IP: [] __rt_schedulable+0x12/0x160 [ 947.683123] *pde = 00000000=20 [ 947.683782] Oops: 0000 [#1] [ 947.684307] Modules linked in: [ 947.684308] [ 947.684308] Pid: 2359, comm: bash Not tainted (2.6.26-rc6 #8) [ 947.684308] EIP: 0060:[] EFLAGS: 00000246 CPU: 0 [ 947.684308] EIP is at __rt_schedulable+0x12/0x160 [ 947.684308] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001 [ 947.684308] ESI: c0521db4 EDI: 00000001 EBP: c6cc9f00 ESP: c6cc9ed0 [ 947.684308] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 947.684308] Process bash (pid: 2359, tiÆcc8000 taskÇa54f00=20 task.tiÆcc8000) [ 947.684308] Stack: c0222790 00000000 080f8c08 c0521db4 c6cc9f00 00000001 00000000 00000000 [ 947.684308] c6cc9f9c 00000000 c0521db4 00000001 c6cc9f28 c0216d40 00000000 00000000 [ 947.684308] c6cc9f9c 000f4240 000e7ef0 ffffffff c0521db4 c79dfb60 c6cc9f58 c02af2cc [ 947.684308] Call Trace: [ 947.684308] [] ? do_proc_dointvec_conv+0x0/0x50 [ 947.684308] [] ? sched_rt_handler+0x80/0x110 [ 947.684308] [] ? proc_sys_call_handler+0x9c/0xb0 [ 947.684308] [] ? proc_sys_write+0x1a/0x20 [ 947.684308] [] ? vfs_write+0x96/0x160 [ 947.684308] [] ? proc_sys_write+0x0/0x20 [ 947.684308] [] ? sys_write+0x3d/0x70 [ 947.684308] [] ? sysenter_past_esp+0x6a/0x91 [ 947.684308] ======================= [ 947.684308] Code: 24 04 e8 62 b1 0e 00 89 c7 89 f8 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 55 89 e5 57 56 53 83 ec 24 89 45 ec 89 55 e4 89 4d e8 <8b> b8 8c 00 00 00 85 ff 0f 84 c9 00 00 00 8b 57 24 39 55 e8 8b [ 947.684308] EIP: [] __rt_schedulable+0x12/0x160 SS:ESP 0068:c6cc9ed0 We think the following patch solves the issue. Signed-off-by: Dario Faggioli Signed-off-by: Michael Trimarchi Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 0422852..320e9a4 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8350,7 +8350,7 @@ static unsigned long to_ratio(u64 period, u64 runtime) #ifdef CONFIG_CGROUP_SCHED static int __rt_schedulable(struct task_group *tg, u64 period, u64 runtime) { - struct task_group *tgi, *parent = tg->parent; + struct task_group *tgi, *parent = tg ? tg->parent : NULL; unsigned long total = 0; if (!parent) { -- cgit v0.10.2 From 7ea56616ba6b3d67a4892728182e38ae162ea3e7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:56 +0200 Subject: sched: rt-group: fix hierarchy Don't re-set the entity's runqueue to the wrong rq after we've set it to the right one. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 320e9a4..ce375cb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7628,7 +7628,6 @@ static void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq, else rt_se->rt_rq = parent->my_q; - rt_se->rt_rq = &rq->rt; rt_se->my_q = rt_rq; rt_se->parent = parent; INIT_LIST_HEAD(&rt_se->run_list); -- cgit v0.10.2 From ad2a3f13b7258a5daaaeb8cff9f835aac468b71d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:57 +0200 Subject: sched: rt-group: heirarchy aware throttle The bandwidth throttle code dequeues a group when it runs out of quota, and re-queues it once the period rolls over and the quota gets refreshed. Sadly it failed to take the hierarchy into consideration. Share more of the enqueue/dequeue code with regular task opterations. Also, some operations like sched_setscheduler() can dequeue/enqueue tasks that are in throttled runqueues, we should not inadvertly re-enqueue empty runqueues so check for that. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 3432d57..8372415 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -449,13 +449,19 @@ void dec_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq) #endif } -static void enqueue_rt_entity(struct sched_rt_entity *rt_se) +static void __enqueue_rt_entity(struct sched_rt_entity *rt_se) { struct rt_rq *rt_rq = rt_rq_of_se(rt_se); struct rt_prio_array *array = &rt_rq->active; struct rt_rq *group_rq = group_rt_rq(rt_se); - if (group_rq && rt_rq_throttled(group_rq)) + /* + * Don't enqueue the group if its throttled, or when empty. + * The latter is a consequence of the former when a child group + * get throttled and the current group doesn't have any other + * active members. + */ + if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running)) return; list_add_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se)); @@ -464,7 +470,7 @@ static void enqueue_rt_entity(struct sched_rt_entity *rt_se) inc_rt_tasks(rt_se, rt_rq); } -static void dequeue_rt_entity(struct sched_rt_entity *rt_se) +static void __dequeue_rt_entity(struct sched_rt_entity *rt_se) { struct rt_rq *rt_rq = rt_rq_of_se(rt_se); struct rt_prio_array *array = &rt_rq->active; @@ -480,11 +486,10 @@ static void dequeue_rt_entity(struct sched_rt_entity *rt_se) * Because the prio of an upper entry depends on the lower * entries, we must remove entries top - down. */ -static void dequeue_rt_stack(struct task_struct *p) +static void dequeue_rt_stack(struct sched_rt_entity *rt_se) { - struct sched_rt_entity *rt_se, *back = NULL; + struct sched_rt_entity *back = NULL; - rt_se = &p->rt; for_each_sched_rt_entity(rt_se) { rt_se->back = back; back = rt_se; @@ -492,7 +497,26 @@ static void dequeue_rt_stack(struct task_struct *p) for (rt_se = back; rt_se; rt_se = rt_se->back) { if (on_rt_rq(rt_se)) - dequeue_rt_entity(rt_se); + __dequeue_rt_entity(rt_se); + } +} + +static void enqueue_rt_entity(struct sched_rt_entity *rt_se) +{ + dequeue_rt_stack(rt_se); + for_each_sched_rt_entity(rt_se) + __enqueue_rt_entity(rt_se); +} + +static void dequeue_rt_entity(struct sched_rt_entity *rt_se) +{ + dequeue_rt_stack(rt_se); + + for_each_sched_rt_entity(rt_se) { + struct rt_rq *rt_rq = group_rt_rq(rt_se); + + if (rt_rq && rt_rq->rt_nr_running) + __enqueue_rt_entity(rt_se); } } @@ -506,32 +530,15 @@ static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup) if (wakeup) rt_se->timeout = 0; - dequeue_rt_stack(p); - - /* - * enqueue everybody, bottom - up. - */ - for_each_sched_rt_entity(rt_se) - enqueue_rt_entity(rt_se); + enqueue_rt_entity(rt_se); } static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep) { struct sched_rt_entity *rt_se = &p->rt; - struct rt_rq *rt_rq; update_curr_rt(rq); - - dequeue_rt_stack(p); - - /* - * re-enqueue all non-empty rt_rq entities. - */ - for_each_sched_rt_entity(rt_se) { - rt_rq = group_rt_rq(rt_se); - if (rt_rq && rt_rq->rt_nr_running) - enqueue_rt_entity(rt_se); - } + dequeue_rt_entity(rt_se); } /* -- cgit v0.10.2 From 15a8641eadb492ef7c5489faa25256967bdfd303 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:59 +0200 Subject: sched: rt-group: fix RR buglet In tick_task_rt() we first call update_curr_rt() which can dequeue a runqueue due to it running out of runtime, and then we try to requeue it, of it also having exhausted its RR quota. Obviously requeueing something that is no longer on the runqueue will not have the expected result. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 8372415..1dad5bb 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -549,8 +549,10 @@ static void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se) { struct rt_prio_array *array = &rt_rq->active; + struct list_head *queue = array->queue + rt_se_prio(rt_se); - list_move_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se)); + if (on_rt_rq(rt_se)) + list_move_tail(&rt_se->run_list, queue); } static void requeue_task_rt(struct rq *rq, struct task_struct *p) -- cgit v0.10.2 From f18f982abf183e91f435990d337164c7a43d1e6d Mon Sep 17 00:00:00 2001 From: Max Krasnyansky Date: Thu, 29 May 2008 11:17:01 -0700 Subject: sched: CPU hotplug events must not destroy scheduler domains created by the cpusets First issue is not related to the cpusets. We're simply leaking doms_cur. It's allocated in arch_init_sched_domains() which is called for every hotplug event. So we just keep reallocation doms_cur without freeing it. I introduced free_sched_domains() function that cleans things up. Second issue is that sched domains created by the cpusets are completely destroyed by the CPU hotplug events. For all CPU hotplug events scheduler attaches all CPUs to the NULL domain and then puts them all into the single domain thereby destroying domains created by the cpusets (partition_sched_domains). The solution is simple, when cpusets are enabled scheduler should not create default domain and instead let cpusets do that. Which is exactly what the patch does. Signed-off-by: Max Krasnyansky Cc: pj@sgi.com Cc: menage@google.com Cc: rostedt@goodmis.org Acked-by: Peter Zijlstra Signed-off-by: Thomas Gleixner diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 039baa4..bceb895 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1890,6 +1890,12 @@ static void common_cpu_mem_hotplug_unplug(void) top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; scan_for_empty_cpusets(&top_cpuset); + /* + * Scheduler destroys domains on hotplug events. + * Rebuild them based on the current settings. + */ + rebuild_sched_domains(); + cgroup_unlock(); } diff --git a/kernel/sched.c b/kernel/sched.c index ce375cb..4a3cb06 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7238,6 +7238,18 @@ void __attribute__((weak)) arch_update_cpu_topology(void) } /* + * Free current domain masks. + * Called after all cpus are attached to NULL domain. + */ +static void free_sched_domains(void) +{ + ndoms_cur = 0; + if (doms_cur != &fallback_doms) + kfree(doms_cur); + doms_cur = &fallback_doms; +} + +/* * Set up scheduler domains and groups. Callers must hold the hotplug lock. * For now this just excludes isolated cpus, but could be used to * exclude other special cases in the future. @@ -7384,6 +7396,7 @@ int arch_reinit_sched_domains(void) get_online_cpus(); mutex_lock(&sched_domains_mutex); detach_destroy_domains(&cpu_online_map); + free_sched_domains(); err = arch_init_sched_domains(&cpu_online_map); mutex_unlock(&sched_domains_mutex); put_online_cpus(); @@ -7469,6 +7482,7 @@ static int update_sched_domains(struct notifier_block *nfb, case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: detach_destroy_domains(&cpu_online_map); + free_sched_domains(); return NOTIFY_OK; case CPU_UP_CANCELED: @@ -7487,8 +7501,16 @@ static int update_sched_domains(struct notifier_block *nfb, return NOTIFY_DONE; } +#ifndef CONFIG_CPUSETS + /* + * Create default domain partitioning if cpusets are disabled. + * Otherwise we let cpusets rebuild the domains based on the + * current setup. + */ + /* The hotplug lock is already held by cpu_up/cpu_down */ arch_init_sched_domains(&cpu_online_map); +#endif return NOTIFY_OK; } -- cgit v0.10.2 From 30e0e178193d4221abc9926b07a4c7661c7cc4a9 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 13 May 2008 10:27:17 +0800 Subject: cpuset: limit the input of cpuset.sched_relax_domain_level We allow the inputs to be [-1 ... SD_LV_MAX), and return -EINVAL for inputs outside this range. Signed-off-by: Li Zefan Acked-by: Paul Menage Acked-by: Paul Jackson Acked-by: Hidetoshi Seto Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index d803c5c..353504d 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -542,7 +542,7 @@ otherwise initial value -1 that indicates the cpuset has no request. 2 : search cores in a package. 3 : search cpus in a node [= system wide on non-NUMA system] ( 4 : search nodes in a chunk of node [on NUMA system] ) - ( 5~ : search system wide [on NUMA system]) + ( 5 : search system wide [on NUMA system] ) This file is per-cpuset and affect the sched domain where the cpuset belongs to. Therefore if the flag 'sched_load_balance' of a cpuset diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 039baa4..66103a1 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1037,8 +1037,8 @@ int current_cpuset_is_being_rebound(void) static int update_relax_domain_level(struct cpuset *cs, s64 val) { - if ((int)val < 0) - val = -1; + if (val < -1 || val >= SD_LV_MAX) + return -EINVAL; if (val != cs->relax_domain_level) { cs->relax_domain_level = val; diff --git a/kernel/sched.c b/kernel/sched.c index eaf6751..bb2c699 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6877,7 +6877,12 @@ static int default_relax_domain_level = -1; static int __init setup_relax_domain_level(char *str) { - default_relax_domain_level = simple_strtoul(str, NULL, 0); + unsigned long val; + + val = simple_strtoul(str, NULL, 0); + if (val < SD_LV_MAX) + default_relax_domain_level = val; + return 1; } __setup("relax_domain_level=", setup_relax_domain_level); -- cgit v0.10.2 From afd38009cc3acd36d41f349a669ad5825d695b1f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 14:18:17 -0400 Subject: rcupreempt: remove export of rcu_batches_completed_bh In rcupreempt, rcu_batches_completed_bh is defined as a static inline in the header file. This does not need to be exported, and not only that, this breaks my PPC build. Signed-off-by: Steven Rostedt Cc: "Paul E. McKenney" Cc: paulus@samba.org Cc: linuxppc-dev@ozlabs.org Signed-off-by: Thomas Gleixner diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index e1cdf19..5e02b77 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -217,8 +217,6 @@ long rcu_batches_completed(void) } EXPORT_SYMBOL_GPL(rcu_batches_completed); -EXPORT_SYMBOL_GPL(rcu_batches_completed_bh); - void __rcu_read_lock(void) { int idx; -- cgit v0.10.2 From 9c106c119ebedf624fbd682fd2a4d52e3c8c1a67 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 27 May 2008 12:23:29 -0500 Subject: softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression The touch_nmi_watchdog() routine on x86 ultimately calls touch_softlockup_watchdog(). The problem is that to touch the softlockup watchdog, the cpu_clock code has to be called which could involve multiple cpu locks and can lead to a hard hang if one of the locks is held by a processor that is not going to return anytime soon (such as could be the case with kgdb or perhaps even with some other kind of exception). This patch causes the public version of the touch_softlockup_watchdog() to defer the cpu clock access to a later point. The test case for this problem is to use the following kernel config options: CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100I100000" It should be noted that kgdb test suite and these options were not available until 2.6.26-rc2, so it was necessary to patch the kgdb test suite during the bisection. I would consider this patch a regression fix because the problem first appeared in commit 27ec4407790d075c325e1f4da0a19c56953cce23 when some logic was added to try to periodically sync the clocks. It was possible to work around this particular problem by simply not performing the sync anytime the system was in a critical context. This was ok until commit 3e51f33fcc7f55e6df25d15b55ed10c8b4da84cd, which added config option CONFIG_HAVE_UNSTABLE_SCHED_CLOCK and some multi-cpu locks to sync the clocks. It became clear that accessing this code from an nmi was the source of the lockups. Avoiding the access to the low level clock code from an code inside the NMI processing also fixed the problem with the 27ec44... commit. Signed-off-by: Jason Wessel Signed-off-by: Ingo Molnar diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 01b6522..c828c23 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -49,12 +49,17 @@ static unsigned long get_timestamp(int this_cpu) return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */ } -void touch_softlockup_watchdog(void) +static void __touch_softlockup_watchdog(void) { int this_cpu = raw_smp_processor_id(); __raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu); } + +void touch_softlockup_watchdog(void) +{ + __raw_get_cpu_var(touch_timestamp) = 0; +} EXPORT_SYMBOL(touch_softlockup_watchdog); void touch_all_softlockup_watchdogs(void) @@ -80,7 +85,7 @@ void softlockup_tick(void) unsigned long now; if (touch_timestamp == 0) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); return; } @@ -95,7 +100,7 @@ void softlockup_tick(void) /* do not print during early bootup: */ if (unlikely(system_state != SYSTEM_RUNNING)) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); return; } @@ -214,7 +219,7 @@ static int watchdog(void *__bind_cpu) sched_setscheduler(current, SCHED_FIFO, ¶m); /* initialize timestamp */ - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); set_current_state(TASK_INTERRUPTIBLE); /* @@ -223,7 +228,7 @@ static int watchdog(void *__bind_cpu) * debug-printout triggers in softlockup_tick(). */ while (!kthread_should_stop()) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); schedule(); if (kthread_should_stop()) -- cgit v0.10.2 From ad524d46f36bbc32033bb72ba42958f12bf49b06 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 6 Jun 2008 10:21:39 +0100 Subject: x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits. When a 64-bit x86 processor runs in 32-bit PAE mode, a pte can potentially have the same number of physical address bits as the 64-bit host ("Enhanced Legacy PAE Paging"). This means, in theory, we could have up to 52 bits of physical address in a pte. The 32-bit kernel uses a 32-bit unsigned long to represent a pfn. This means that it can only represent physical addresses up to 32+12=44 bits wide. Rather than widening pfns everywhere, just set 2^44 as the Linux x86_32-PAE architectural limit for physical address size. This is a bugfix for two cases: 1. running a 32-bit PAE kernel on a machine with more than 64GB RAM. 2. running a 32-bit PAE Xen guest on a host machine with more than 64GB RAM In both cases, a pte could need to have more than 36 bits of physical, and masking it to 36-bits will cause fairly severe havoc. Signed-off-by: Jeremy Fitzhardinge Cc: Jan Beulich Cc: Signed-off-by: Ingo Molnar diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h index 424e82f..ccf0ba3 100644 --- a/include/asm-x86/page_32.h +++ b/include/asm-x86/page_32.h @@ -14,7 +14,8 @@ #define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) #ifdef CONFIG_X86_PAE -#define __PHYSICAL_MASK_SHIFT 36 +/* 44=32+12, the limit we can fit into an unsigned long pfn */ +#define __PHYSICAL_MASK_SHIFT 44 #define __VIRTUAL_MASK_SHIFT 32 #define PAGETABLE_LEVELS 3 -- cgit v0.10.2 From 75118a82e21cafb4a82b53bb85d1c7689787e046 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 13 Jun 2008 15:47:12 -0700 Subject: x86: fix NULL pointer deref in __switch_to Patrick McHardy reported a crash: > > I get this oops once a day, its apparently triggered by something > > run by cron, but the process is a different one each time. > > > > Kernel is -git from yesterday shortly before the -rc6 release > > (last commit is the usb-2.6 merge, the x86 patches are missing), > > .config is attached. > > > > I'll retry with current -git, but the patches that have gone in > > since I last updated don't look related. > > > > [62060.043009] BUG: unable to handle kernel NULL pointer dereference at > > 000001ff > > [62060.043009] IP: [] __switch_to+0x2f/0x118 > > [62060.043009] *pde = 00000000 > > [62060.043009] Oops: 0002 [#1] PREEMPT Vegard Nossum analyzed it: > This decodes to > > 0: 0f ae 00 fxsave (%eax) > > so it's related to the floating-point context. This is the exact > location of the crash: > > $ addr2line -e arch/x86/kernel/process_32.o -i ab0 > include/asm/i387.h:232 > include/asm/i387.h:262 > arch/x86/kernel/process_32.c:595 > > ...so it looks like prev_task->thread.xstate->fxsave has become NULL. > Or maybe it never had any other value. Somehow (as described below) TS_USEDFPU is set but the fpu is not allocated or freed. Another possible FPU pre-emption issue with the sleazy FPU optimization which was benign before but not so anymore, with the dynamic FPU allocation patch. New task is getting exec'd and it is prempted at the below point. flush_thread() { ... /* * Forget coprocessor state.. */ clear_fpu(tsk); <----- Preemption point clear_used_math(); ... } Now when it context switches in again, as the used_math() is still set and fpu_counter can be > 5, we will do a math_state_restore() which sets the task's TS_USEDFPU. After it continues from the above preemption point it does clear_used_math() and much later free_thread_xstate(). Now, at the next context switch, it is quite possible that xstate is null, used_math() is not set and TS_USEDFPU is still set. This will trigger unlazy_fpu() causing kernel oops. Fix this by clearing tsk's fpu_counter before clearing task's fpu. Reported-by: Patrick McHardy Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 6d54833..e2db9ac 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -333,6 +333,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ac54ff5..c6eb5c9 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -294,6 +294,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } -- cgit v0.10.2 From df17b1d990fc214f033c5588e58216ec941591e0 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sun, 15 Jun 2008 02:19:56 +0200 Subject: x86, 32-bit: fix boot failure on TSC-less processors Booting 2.6.26-rc6 on my 486 DX/4 fails with a "BUG: Int 6" (invalid opcode) and a kernel halt immediately after the kernel has been uncompressed. The BUG shows EIP pointing to an rdtsc instruction in native_read_tsc(), invoked from native_sched_clock(). (This error occurs so early that not even the serial console can capture it.) A bisection showed that this bug first occurs in 2.6.26-rc3-git7, via commit 9ccc906c97e34fd91dc6aaf5b69b52d824386910: >x86: distangle user disabled TSC from unstable > >tsc_enabled is set to 0 from the command line switch "notsc" and from >the mark_tsc_unstable code. Seperate those functionalities and replace >tsc_enable with tsc_disable. This makes also the native_sched_clock() >decision when to use TSC understandable. > >Preparatory patch to solve the sched_clock() issue on 32 bit. > >Signed-off-by: Thomas Gleixner The core reason for this bug is that native_sched_clock() gets called before tsc_init(). Before the commit above, tsc_32.c used a "tsc_enabled" variable which defaulted to 0 == disabled, and which only got enabled late in tsc_init(). Thus early calls to native_sched_clock() would skip the TSC and use jiffies instead. After the commit above, tsc_32.c uses a "tsc_disabled" variable which defaults to 0, meaning that the TSC is Ok to use. Early calls to native_sched_clock() now erroneously try to use the TSC on !cpu_has_tsc processors, leading to invalid opcode exceptions. My proposed fix is to initialise tsc_disabled to a "soft disabled" state distinct from the hard disabled state set up by the "notsc" kernel option. This fixes the native_sched_clock() problem. It also allows tsc_init() to be simplified: instead of setting tsc_disabled = 1 on every error return, we just set tsc_disabled = 0 once when all checks have succeeded. I've verified that this lets my 486 boot again. I've also verified that a Core2 machine still uses the TSC as clocksource after the patch. Signed-off-by: Mikael Pettersson Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index 068759d..65b7063 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -14,7 +14,10 @@ #include "mach_timer.h" -static int tsc_disabled; +/* native_sched_clock() is called before tsc_init(), so + we must start with the TSC soft disabled to prevent + erroneous rdtsc usage on !cpu_has_tsc processors */ +static int tsc_disabled = -1; /* * On some systems the TSC frequency does not @@ -402,25 +405,20 @@ void __init tsc_init(void) { int cpu; - if (!cpu_has_tsc || tsc_disabled) { - /* Disable the TSC in case of !cpu_has_tsc */ - tsc_disabled = 1; + if (!cpu_has_tsc || tsc_disabled > 0) return; - } cpu_khz = calculate_cpu_khz(); tsc_khz = cpu_khz; if (!cpu_khz) { mark_tsc_unstable("could not calculate TSC khz"); - /* - * We need to disable the TSC completely in this case - * to prevent sched_clock() from using it. - */ - tsc_disabled = 1; return; } + /* now allow native_sched_clock() to use rdtsc */ + tsc_disabled = 0; + printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, (unsigned long)cpu_khz % 1000); -- cgit v0.10.2 From d3942cff620bea073fc4e3c8ed878eb1e84615ce Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 8 Jun 2008 16:16:07 +0200 Subject: x86: use BOOTMEM_EXCLUSIVE on 32-bit This patch uses the BOOTMEM_EXCLUSIVE for crashkernel reservation also for i386 and prints a error message on failure. The patch is still for 2.6.26 since it is only bug fixing. The unification of reserve_crashkernel() between i386 and x86_64 should be done for 2.6.27. Signed-off-by: Bernhard Walle Signed-off-by: Ingo Molnar Cc: diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2c5f8b2..5a2f8e0 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void) (unsigned long)(crash_size >> 20), (unsigned long)(crash_base >> 20), (unsigned long)(total_mem >> 20)); + + if (reserve_bootmem(crash_base, crash_size, + BOOTMEM_EXCLUSIVE) < 0) { + printk(KERN_INFO "crashkernel reservation " + "failed - memory is in use\n"); + return; + } + crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; - reserve_bootmem(crash_base, crash_size, - BOOTMEM_DEFAULT); } else printk(KERN_INFO "crashkernel reservation failed - " "you have to specify a base address\n"); -- cgit v0.10.2 From ec64b6c8763c83899908fdd62746435c19211686 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 19 Jun 2008 17:07:15 +0800 Subject: Blackfin arch: fix typo error in bf548 serial header file Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 59b4ad4..aabe5b9 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -187,7 +187,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) #ifdef CONFIG_BFIN_UART1_CTSRTS peripheral_request(P_UART1_RTS, DRIVER_NAME); - peripheral_request(P_UART1_CTS DRIVER_NAME); + peripheral_request(P_UART1_CTS, DRIVER_NAME); #endif #endif @@ -202,7 +202,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) #ifdef CONFIG_BFIN_UART3_CTSRTS peripheral_request(P_UART3_RTS, DRIVER_NAME); - peripheral_request(P_UART3_CTS DRIVER_NAME); + peripheral_request(P_UART3_CTS, DRIVER_NAME); #endif #endif SSYNC(); -- cgit v0.10.2 From f30ac0ce34f32bb998ac87e37b251374de03e603 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 19 Jun 2008 17:46:39 +0800 Subject: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index f20952c..fd9bb77 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -49,6 +49,7 @@ #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES (HZ / 50) +#define CTS_CHECK_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } /* * Check the modem control lines before * transmitting anything. @@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) } #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS -static void bfin_serial_do_work(struct work_struct *work) -{ - struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); - - bfin_serial_mctrl_check(uart); -} -#endif - #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { @@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->tx_done = 0; + /* + * Check the modem control lines before + * transmitting anything. + */ + bfin_serial_mctrl_check(uart); + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { uart->tx_count = 0; uart->tx_done = 1; @@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->port.x_char = 0; } - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -565,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; - schedule_work(&uart->cts_workqueue); + uart->cts_timer.data = (unsigned long)(uart); + uart->cts_timer.function = (void *)bfin_serial_mctrl_check; + uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; + add_timer(&(uart->cts_timer)); } else { tty->hw_stopped = 0; } @@ -885,7 +881,7 @@ static void __init bfin_serial_init_ports(void) init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); + init_timer(&(bfin_serial_ports[i].cts_timer)); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 96bd09e..2526b6e 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index e924569..ebf592b 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 41d7b64..1bf56ff 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index aabe5b9..5e29446 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -99,7 +99,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 30d90b5..8aa0278 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif -- cgit v0.10.2 From d38b149794e7444a55e741446717147e7f0467f8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 3 Apr 2008 10:40:39 +0200 Subject: hwmon: (lm85) Fix function RANGE_TO_REG() Function RANGE_TO_REG() is broken. For a requested range of 2000 (2 degrees C), it will return an index value of 15, i.e. 80.0 degrees C, instead of the expected index value of 0. All other values are handled properly, just 2000 isn't. The bug was introduced back in November 2004 by this patch: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0 While this can be fixed easily with the current code, I'd rather rewrite the whole function in a way which is more obviously correct. Signed-off-by: Jean Delvare Cc: Justin Thiessen Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 182fe6a..ee5eca1 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -192,23 +192,20 @@ static int RANGE_TO_REG( int range ) { int i; - if ( range < lm85_range_map[0] ) { - return 0 ; - } else if ( range > lm85_range_map[15] ) { + if (range >= lm85_range_map[15]) return 15 ; - } else { /* find closest match */ - for ( i = 14 ; i >= 0 ; --i ) { - if ( range > lm85_range_map[i] ) { /* range bracketed */ - if ((lm85_range_map[i+1] - range) < - (range - lm85_range_map[i])) { - i++; - break; - } - break; - } + + /* Find the closest match */ + for (i = 14; i >= 0; --i) { + if (range >= lm85_range_map[i]) { + if ((lm85_range_map[i + 1] - range) < + (range - lm85_range_map[i])) + return i + 1; + return i; } } - return( i & 0x0f ); + + return 0; } #define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) -- cgit v0.10.2 From ed4ec814e45ae8b1596aea0a29b92f6c3614acaa Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 26 Apr 2008 16:34:26 +0200 Subject: hwmon: (adt7473) Initialize max_duty_at_overheat before use data->max_duty_at_overheat is not updated in adt7473_update_device, so it might be used before it is initialized (if the user reads from sysfs file max_duty_at_crit before writing to it.) Signed-off-by: Jean Delvare Acked-by: Darrick J. Wong Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index c1009d6..93dbf5e 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -309,6 +309,9 @@ no_sensor_update: ADT7473_REG_PWM_BHVR(i)); } + i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); + data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT); + data->limits_last_updated = local_jiffies; data->limits_valid = 1; -- cgit v0.10.2 From 125ff8087fca28e922e7ad6e082efcf04fe2f0f4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 23 Feb 2008 10:57:53 +0100 Subject: hwmon: Update the sysfs interface documentation * Document the characteristics of libsensors 3.0.0 and 3.0.1. * The sysfs interface is no longer subject to changes. Signed-off-by: Jean Delvare Acked-by: Juerg Haefliger Signed-off-by: Mark M. Hoffman diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index f4a8ebc..2d84573 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -2,17 +2,12 @@ Naming and data format standards for sysfs files ------------------------------------------------ The libsensors library offers an interface to the raw sensors data -through the sysfs interface. See libsensors documentation and source for -further information. As of writing this document, libsensors -(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating -support for any given chip requires modifying the library's code. -This is because libsensors was written for the procfs interface -older kernel modules were using, which wasn't standardized enough. -Recent versions of libsensors (from lm_sensors 2.8.2 and later) have -support for the sysfs interface, though. - -The new sysfs interface was designed to be as chip-independent as -possible. +through the sysfs interface. Since lm-sensors 3.0.0, libsensors is +completely chip-independent. It assumes that all the kernel drivers +implement the standard sysfs interface described in this document. +This makes adding or updating support for any given chip very easy, as +libsensors, and applications using it, do not need to be modified. +This is a major improvement compared to lm-sensors 2. Note that motherboards vary widely in the connections to sensor chips. There is no standard that ensures, for example, that the second @@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs will have to implement conversion, labeling and hiding of inputs. For this reason, it is still not recommended to bypass the library. -If you are developing a userspace application please send us feedback on -this standard. - -Note that this standard isn't completely established yet, so it is subject -to changes. If you are writing a new hardware monitoring driver those -features can't seem to fit in this interface, please contact us with your -extension proposal. Keep in mind that backward compatibility must be -preserved. - Each chip gets its own directory in the sysfs /sys/devices tree. To find all sensor chips, it is easier to follow the device symlinks from /sys/class/hwmon/hwmon*. +Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes +in the "physical" device directory. Since lm-sensors 3.0.1, attributes found +in the hwmon "class" device directory are also supported. Complex drivers +(e.g. drivers for multifunction chips) may want to use this possibility to +avoid namespace pollution. The only drawback will be that older versions of +libsensors won't support the driver in question. + All sysfs values are fixed point numbers. There is only one value per file, unlike the older /proc specification. -- cgit v0.10.2 From 1604e78b7d6e6087ae9bde6e7a6b41cda80d6557 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 26 Feb 2008 19:34:48 +0100 Subject: hwmon: (abituguru3) Identify Abit AW8D board as such This patch identifies the Abit AW8D board as such, and adds support for its aux5 fan connector Signed-off-by: Hans de Goede Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index ed33fdd..f2086e9 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -323,7 +323,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0013, "unknown", { + { 0x0013, "Abit AW8D", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -349,6 +349,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX2 Fan", 36, 2, 60, 1, 0 }, { "AUX3 Fan", 37, 2, 60, 1, 0 }, { "AUX4 Fan", 38, 2, 60, 1, 0 }, + { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, { 0x0014, "Abit AB9 Pro", { -- cgit v0.10.2 From 25845c22647fad2a0852cf6bf277d84e8a7a6b4a Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Sun, 8 Jun 2008 10:59:41 -0400 Subject: hwmon: (w83791d) new maintainer Signed-off-by: Charles Spirakis Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman diff --git a/MAINTAINERS b/MAINTAINERS index 9d43042..fa30364 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4428,10 +4428,10 @@ M: johnpol@2ka.mipt.ru S: Maintained W83791D HARDWARE MONITORING DRIVER -P: Charles Spirakis -M: bezaur@gmail.com +P: Marc Hulsman +M: m.hulsman@tudelft.nl L: lm-sensors@lm-sensors.org -S: Odd Fixes +S: Maintained W83793 HARDWARE MONITORING DRIVER P: Rudolf Marek -- cgit v0.10.2 From b3aeab0cdbd0fe5339a3a5918b59eebf148cbcd1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 23 May 2008 16:10:41 +0200 Subject: hwmon: (abituguru3) update driver detection It has been reported that the abituguru3 driver fails to load after a BIOS update. This patch fixes this by loosening the detection routine so that it will work after the BIOS update too. To compensate for the now very loose detection an additional check is added on the DMI Base Board vendor string to make sure we only load on Abit motherboards, this is the same as the check in the abituguru (1 / 2) driver. Signed-of-by: Hans de Goede Signed-off-by: Alistair John Strachan Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index f2086e9..f00f497 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -30,6 +30,7 @@ #include #include #include +#include #include /* uGuru3 bank addresses */ @@ -1112,11 +1113,12 @@ static int __init abituguru3_detect(void) { /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05 - at CMD instead, why is unknown. So we test for 0x05 too. */ + or 0x55 at CMD instead, why is unknown. */ u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA); u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD); if (((data_val == 0x00) || (data_val == 0x08)) && - ((cmd_val == 0xAC) || (cmd_val == 0x05))) + ((cmd_val == 0xAC) || (cmd_val == 0x05) || + (cmd_val == 0x55))) return ABIT_UGURU3_BASE; ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = " @@ -1139,6 +1141,15 @@ static int __init abituguru3_init(void) int address, err; struct resource res = { .flags = IORESOURCE_IO }; +#ifdef CONFIG_DMI + const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + + /* safety check, refuse to load on non Abit motherboards */ + if (!force && (!board_vendor || + strcmp(board_vendor, "http://www.abit.com.tw/"))) + return -ENODEV; +#endif + address = abituguru3_detect(); if (address < 0) return address; -- cgit v0.10.2 From bcccc3a28e9cbb44549cde326852c26203a53a56 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 3 May 2008 19:19:16 -0700 Subject: hwmon: (lm75) sensor reading bugfix LM75 sensor reading bugfix: never save error status as valid sensor output. This could be improved, but at least this prevents certain rude failure modes. Signed-off-by: David Brownell Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index fa76969..de698dc 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -251,10 +251,13 @@ static int lm75_detach_client(struct i2c_client *client) the SMBus standard. */ static int lm75_read_value(struct i2c_client *client, u8 reg) { + int value; + if (reg == LM75_REG_CONF) return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); + + value = i2c_smbus_read_word_data(client, reg); + return (value < 0) ? value : swab16(value); } static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) @@ -287,9 +290,16 @@ static struct lm75_data *lm75_update_device(struct device *dev) int i; dev_dbg(&client->dev, "Starting lm75 update\n"); - for (i = 0; i < ARRAY_SIZE(data->temp); i++) - data->temp[i] = lm75_read_value(client, - LM75_REG_TEMP[i]); + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + int status; + + status = lm75_read_value(client, LM75_REG_TEMP[i]); + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", + LM75_REG_TEMP[i], status); + else + data->temp[i] = status; + } data->last_updated = jiffies; data->valid = 1; } -- cgit v0.10.2 From d4abc238c9f4df8b3216f3e883f5d0a07b7ac75a Mon Sep 17 00:00:00 2001 From: Bharath Ravi Date: Mon, 16 Jun 2008 15:11:01 +0530 Subject: sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue This patch corrects the incorrect value of per process run-queue wait time reported by delay statistics. The anomaly was due to the following reason. When a process leaves the CPU and immediately starts waiting for CPU on the runqueue (which means it remains in the TASK_RUNNABLE state), the time of re-entry into the run-queue is never recorded. Due to this, the waiting time on the runqueue from this point of re-entry upto the next time it hits the CPU is not accounted for. This is solved by recording the time of re-entry of a process leaving the CPU in the sched_info_depart() function IF the process will go back to waiting on the run-queue. This IF condition is verified by checking whether the process is still in the TASK_RUNNABLE state. The patch was tested on 2.6.26-rc6 using two simple CPU hog programs. The values noted prior to the fix did not account for the time spent on the runqueue waiting. After the fix, the correct values were reported back to user space. Signed-off-by: Bharath Ravi Signed-off-by: Madhava K R Cc: dhaval@linux.vnet.ibm.com Cc: vatsa@in.ibm.com Cc: balbir@in.ibm.com Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index a38878e..80179ef 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -198,6 +198,9 @@ static inline void sched_info_queued(struct task_struct *t) /* * Called when a process ceases being the active-running process, either * voluntarily or involuntarily. Now we can calculate how long we ran. + * Also, if the process is still in the TASK_RUNNING state, call + * sched_info_queued() to mark that it has now again started waiting on + * the runqueue. */ static inline void sched_info_depart(struct task_struct *t) { @@ -206,6 +209,9 @@ static inline void sched_info_depart(struct task_struct *t) t->sched_info.cpu_time += delta; rq_sched_info_depart(task_rq(t), delta); + + if (t->state == TASK_RUNNING) + sched_info_queued(t); } /* -- cgit v0.10.2 From ffe6e1da86d21d7855495b5a772c93f050258f6e Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 18 Jun 2008 11:34:38 -0600 Subject: x86, geode: add a VSA2 ID for General Software General Software writes their own VSA2 module for their version of the Geode BIOS, which returns a different ID then the standard VSA2. This was causing the framebuffer driver to break for most GSW boards. Signed-off-by: Jordan Crouse Cc: tglx@linutronix.de Cc: linux-geode@lists.infradead.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c index e8edd63..9b08e85 100644 --- a/arch/x86/kernel/geode_32.c +++ b/arch/x86/kernel/geode_32.c @@ -166,6 +166,8 @@ int geode_has_vsa2(void) static int has_vsa2 = -1; if (has_vsa2 == -1) { + u16 val; + /* * The VSA has virtual registers that we can query for a * signature. @@ -173,7 +175,8 @@ int geode_has_vsa2(void) outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX); - has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG); + val = inw(VSA_VRC_DATA); + has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG); } return has_vsa2; diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index 6e64588..bb06027 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -112,8 +112,8 @@ extern int geode_get_dev_base(unsigned int dev); #define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */ #define VSA_VR_SIGNATURE 0x0003 #define VSA_VR_MEM_SIZE 0x0200 -#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */ - +#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */ +#define GSW_VSA_SIG 0x534d /* General Software signature */ /* GPIO */ #define GPIO_OUTPUT_VAL 0x00 -- cgit v0.10.2 From 7d15ddf79ec35ce79093832c80b86c0888eb5bce Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 20 Jun 2008 11:48:06 +1000 Subject: [agp]: fixup chipset flush for new Intel G4x. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 1ae64bb..df70264 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -948,7 +948,7 @@ static void intel_i9xx_setup_flush(void) intel_private.ifp_resource.flags = IORESOURCE_MEM; /* Setup chipset flush for 915 */ - if (IS_I965 || IS_G33) { + if (IS_I965 || IS_G33 || IS_G4X) { intel_i965_g33_setup_chipset_flush(); } else { intel_i915_setup_chipset_flush(); -- cgit v0.10.2 From d3adbc0c582b767ba1561ffa38313e905cc917ea Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 20 Jun 2008 12:12:56 +1000 Subject: drm/i915: add support for Intel series 4 chipsets. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index bad096f..135bd19 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -409,4 +409,7 @@ {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 1b20f7c..d7326d9 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -1112,12 +1112,19 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x29A2 || \ (dev)->pci_device == 0x2A02 || \ (dev)->pci_device == 0x2A12 || \ - (dev)->pci_device == 0x2A42) + (dev)->pci_device == 0x2A42 || \ + (dev)->pci_device == 0x2E02 || \ + (dev)->pci_device == 0x2E12 || \ + (dev)->pci_device == 0x2E22) #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) #define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42) +#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ + (dev)->pci_device == 0x2E12 || \ + (dev)->pci_device == 0x2E22) + #define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ (dev)->pci_device == 0x29B2 || \ (dev)->pci_device == 0x29D2) @@ -1128,7 +1135,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev)) -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev)) +#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) -- cgit v0.10.2 From 858a3685bcf3ac199128e4aa85eaae2fb9d191b5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 20 Jun 2008 15:42:38 +1000 Subject: drm: only trust core drm ioctls - driver ioctls are a mess. So driver ioctls need a full auditing before we can make this change. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 22957ac1..5641387 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -470,19 +470,18 @@ int drm_ioctl(struct inode *inode, struct file *filp, if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) && (nr < DRM_COMMAND_BASE + dev->driver->num_ioctls)) ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE]; - else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) + else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) { ioctl = &drm_ioctls[nr]; - else + cmd = ioctl->cmd; + } else goto err_i1; /* Do not trust userspace, use our own definition */ - cmd = ioctl->cmd; func = ioctl->func; /* is there a local override? */ if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl) func = dev->driver->dma_ioctl; - if (!func) { DRM_DEBUG("no function\n"); retcode = -EINVAL; -- cgit v0.10.2 From 8a8cde163ea724baf74e7752a31a69d3121a240e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 14:22:28 +0200 Subject: sched: rt: dont stop the period timer when there are tasks wanting to run So if the group ever gets throttled, it will never wake up again. Reported-by: "Daniel K." Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 1dad5bb..0f3c191 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -250,7 +250,8 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) if (rt_rq->rt_time || rt_rq->rt_nr_running) idle = 0; spin_unlock(&rt_rq->rt_runtime_lock); - } + } else if (rt_rq->rt_nr_running) + idle = 0; if (enqueue) sched_rt_rq_enqueue(rt_rq); -- cgit v0.10.2 From bb10ed0994927d433f6dbdf274fdb26cfcf516b7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 19 Jun 2008 15:04:07 -0700 Subject: sched: fix wait_for_completion_timeout() spurious failure under heavy load It seems that the current implementaton of wait_for_completion_timeout() has a small problem under very high load for the common pattern: if (!wait_for_completion_timeout(&done, timeout)) /* handle failure */ because the implementation very roughly does (lots of code deleted to show the basic flow): static inline long __sched do_wait_for_common(struct completion *x, long timeout, int state) { if (x->done) return timeout; do { timeout = schedule_timeout(timeout); if (!timeout) return timeout; } while (!x->done); return timeout; } so if the system is very busy and x->done is not set when do_wait_for_common() is entered, it is possible that the first call to schedule_timeout() returns 0 because the task doing wait_for_completion doesn't get rescheduled for a long time, even if it is woken up early enough. In this case, wait_for_completion_timeout() returns 0 without even checking x->done again, and the code above falls into its failure case purely for scheduler reasons, even if the hardware event or whatever was being waited for happened early enough. It would make sense to add an extra test to do_wait_for() in the timeout case and return 1 if x->done is actually set. A quick audit (not exhaustive) of wait_for_completion_timeout() callers seems to indicate that no one actually cares about the return value in the success case -- they just test for 0 (timed out) versus non-zero (wait succeeded). Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 4a3cb06..577f160 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4405,6 +4405,16 @@ do_wait_for_common(struct completion *x, long timeout, int state) spin_unlock_irq(&x->wait.lock); timeout = schedule_timeout(timeout); spin_lock_irq(&x->wait.lock); + + /* + * If the completion has arrived meanwhile + * then return 1 jiffy time left: + */ + if (x->done && !timeout) { + timeout = 1; + break; + } + if (!timeout) { __remove_wait_queue(&x->wait, &wait); return timeout; -- cgit v0.10.2 From 54481cf88bc59923ea30f2ca345a73c60155e901 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 19 Jun 2008 09:41:22 -0700 Subject: x86: fix NULL pointer deref in __switch_to MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I am able to reproduce the oops reported by Simon in __switch_to() with lguest. My debug showed that there is at least one lguest specific issue (which should be present in 2.6.25 and before aswell) and it got exposed with a kernel oops with the recent fpu dynamic allocation patches. In addition to the previous possible scenario (with fpu_counter), in the presence of lguest, it is possible that the cpu's TS bit it still set and the lguest launcher task's thread_info has TS_USEDFPU still set. This is because of the way the lguest launcher handling the guest's TS bit. (look at lguest_set_ts() in lguest_arch_run_guest()). This can result in a DNA fault while doing unlazy_fpu() in __switch_to(). This will end up causing a DNA fault in the context of new process thats getting context switched in (as opossed to handling DNA fault in the context of lguest launcher/helper process). This is wrong in both pre and post 2.6.25 kernels. In the recent 2.6.26-rc series, this is showing up as NULL pointer dereferences or sleeping function called from atomic context(__switch_to()), as we free and dynamically allocate the FPU context for the newly created threads. Older kernels might show some FPU corruption for processes running inside of lguest. With the appended patch, my test system is running for more than 50 mins now. So atleast some of your oops (hopefully all!) should get fixed. Please give it a try. I will spend more time with this fix tomorrow. Reported-by: Simon Holm Thøgersen Reported-by: Patrick McHardy Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 5126d5d..2e554a4 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -176,7 +176,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) * we set it now, so we can trap and pass that trap to the Guest if it * uses the FPU. */ if (cpu->ts) - lguest_set_ts(); + unlazy_fpu(current); /* SYSENTER is an optimized way of doing system calls. We can't allow * it because it always jumps to privilege level 0. A normal Guest @@ -196,6 +196,10 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) * trap made the switcher code come back, and an error code which some * traps set. */ + /* Restore SYSENTER if it's supposed to be on. */ + if (boot_cpu_has(X86_FEATURE_SEP)) + wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); + /* If the Guest page faulted, then the cr2 register will tell us the * bad virtual address. We have to grab this now, because once we * re-enable interrupts an interrupt could fault and thus overwrite @@ -203,13 +207,12 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) if (cpu->regs->trapnum == 14) cpu->arch.last_pagefault = read_cr2(); /* Similarly, if we took a trap because the Guest used the FPU, - * we have to restore the FPU it expects to see. */ + * we have to restore the FPU it expects to see. + * math_state_restore() may sleep and we may even move off to + * a different CPU. So all the critical stuff should be done + * before this. */ else if (cpu->regs->trapnum == 7) math_state_restore(); - - /* Restore SYSENTER if it's supposed to be on. */ - if (boot_cpu_has(X86_FEATURE_SEP)) - wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); } /*H:130 Now we've examined the hypercall code; our Guest can make requests. -- cgit v0.10.2 From 46539383791a0e59a4af7412056dfbfc5240af0a Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 16 Jun 2008 14:58:13 -0700 Subject: xen: Use wmb instead of rmb in xen_evtchn_do_upcall(). This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg. Use wmb instead of rmb to enforce ordering between evtchn_upcall_pending and evtchn_pending_sel stores in xen_evtchn_do_upcall(). Cc: Samuel Thibault Signed-off-by: Isaku Yamahata Cc: Nick Piggin Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 4f0f22b..76e5b73 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -529,7 +529,7 @@ void xen_evtchn_do_upcall(struct pt_regs *regs) #ifndef CONFIG_X86 /* No need for a barrier -- XCHG is a barrier on x86. */ /* Clear master flag /before/ clearing selector flag. */ - rmb(); + wmb(); #endif pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0); while (pending_words != 0) { -- cgit v0.10.2 From 05345b0f006ac226d0d25d48fcb2d792ac44a071 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 16 Jun 2008 15:01:53 -0700 Subject: xen: mask unwanted pte bits in __supported_pte_mask [ Stable: this isn't a bugfix in itself, but it's a pre-requiste for "xen: don't drop NX bit" ] Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e4..c048de3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1228,6 +1228,11 @@ asmlinkage void __init xen_start_kernel(void) if (xen_feature(XENFEAT_supervisor_mode_kernel)) pv_info.kernel_rpl = 0; + /* Prevent unwanted bits from being set in PTEs. */ + __supported_pte_mask &= ~_PAGE_GLOBAL; + if (!is_initial_xendomain()) + __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); + /* set the limit of our address space */ xen_reserve_top(); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 3525ef5..3f2a67f 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -199,10 +199,8 @@ pgdval_t xen_pgd_val(pgd_t pgd) pte_t xen_make_pte(pteval_t pte) { - if (pte & _PAGE_PRESENT) { + if (pte & _PAGE_PRESENT) pte = phys_to_machine(XPADDR(pte)).maddr; - pte &= ~(_PAGE_PCD | _PAGE_PWT); - } return (pte_t){ .pte = pte }; } -- cgit v0.10.2 From ebb9cfe20fe167f29960a5e913193a684fac50bf Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 16 Jun 2008 15:01:56 -0700 Subject: xen: don't drop NX bit Because NX is now enforced properly, we must put the hypercall page into the .text segment so that it is executable. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 3f2a67f..265601d 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -179,46 +179,54 @@ out: preempt_enable(); } -pteval_t xen_pte_val(pte_t pte) +/* Assume pteval_t is equivalent to all the other *val_t types. */ +static pteval_t pte_mfn_to_pfn(pteval_t val) { - pteval_t ret = pte.pte; + if (val & _PAGE_PRESENT) { + unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT; + pteval_t flags = val & ~PTE_MASK; + val = (mfn_to_pfn(mfn) << PAGE_SHIFT) | flags; + } - if (ret & _PAGE_PRESENT) - ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; + return val; +} - return ret; +static pteval_t pte_pfn_to_mfn(pteval_t val) +{ + if (val & _PAGE_PRESENT) { + unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT; + pteval_t flags = val & ~PTE_MASK; + val = (pfn_to_mfn(pfn) << PAGE_SHIFT) | flags; + } + + return val; +} + +pteval_t xen_pte_val(pte_t pte) +{ + return pte_mfn_to_pfn(pte.pte); } pgdval_t xen_pgd_val(pgd_t pgd) { - pgdval_t ret = pgd.pgd; - if (ret & _PAGE_PRESENT) - ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; - return ret; + return pte_mfn_to_pfn(pgd.pgd); } pte_t xen_make_pte(pteval_t pte) { - if (pte & _PAGE_PRESENT) - pte = phys_to_machine(XPADDR(pte)).maddr; - - return (pte_t){ .pte = pte }; + pte = pte_pfn_to_mfn(pte); + return native_make_pte(pte); } pgd_t xen_make_pgd(pgdval_t pgd) { - if (pgd & _PAGE_PRESENT) - pgd = phys_to_machine(XPADDR(pgd)).maddr; - - return (pgd_t){ pgd }; + pgd = pte_pfn_to_mfn(pgd); + return native_make_pgd(pgd); } pmdval_t xen_pmd_val(pmd_t pmd) { - pmdval_t ret = native_pmd_val(pmd); - if (ret & _PAGE_PRESENT) - ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; - return ret; + return pte_mfn_to_pfn(pmd.pmd); } #ifdef CONFIG_X86_PAE void xen_set_pud(pud_t *ptr, pud_t val) @@ -265,9 +273,7 @@ void xen_pmd_clear(pmd_t *pmdp) pmd_t xen_make_pmd(pmdval_t pmd) { - if (pmd & _PAGE_PRESENT) - pmd = phys_to_machine(XPADDR(pmd)).maddr; - + pmd = pte_pfn_to_mfn(pmd); return native_make_pmd(pmd); } #else /* !PAE */ diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 288d587..3175e97 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -17,7 +17,7 @@ ENTRY(startup_xen) __FINIT -.pushsection .bss.page_aligned +.pushsection .text .align PAGE_SIZE_asm ENTRY(hypercall_page) .skip 0x1000 -- cgit v0.10.2 From ea71a546706dfdad72462624394e1e472c6bf34f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 20 Jun 2008 18:32:20 +0400 Subject: sched: refactor wait_for_completion_timeout() Simplify the code and fix the boundary condition of wait_for_completion_timeout(,0). We can kill the first __remove_wait_queue() as well. Signed-off-by: Ingo Molnar Acked-by: Peter Zijlstra diff --git a/kernel/sched.c b/kernel/sched.c index 577f160..bebf978 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4398,32 +4398,20 @@ do_wait_for_common(struct completion *x, long timeout, int state) signal_pending(current)) || (state == TASK_KILLABLE && fatal_signal_pending(current))) { - __remove_wait_queue(&x->wait, &wait); - return -ERESTARTSYS; + timeout = -ERESTARTSYS; + break; } __set_current_state(state); spin_unlock_irq(&x->wait.lock); timeout = schedule_timeout(timeout); spin_lock_irq(&x->wait.lock); - - /* - * If the completion has arrived meanwhile - * then return 1 jiffy time left: - */ - if (x->done && !timeout) { - timeout = 1; - break; - } - - if (!timeout) { - __remove_wait_queue(&x->wait, &wait); - return timeout; - } - } while (!x->done); + } while (!x->done && timeout); __remove_wait_queue(&x->wait, &wait); + if (!x->done) + return timeout; } x->done--; - return timeout; + return timeout ?: 1; } static long __sched -- cgit v0.10.2 From 2856922c158605514ec5974a03097eaec91f4c0d Mon Sep 17 00:00:00 2001 From: Frederic Bohe Date: Fri, 20 Jun 2008 11:48:48 -0400 Subject: Ext4: Fix online resize block group descriptor corruption This is the patch for the group descriptor table corruption during online resize pointed out by Theodore Tso. The problem was caused by the fact that the ext4 group descriptor can be either 32 or 64 bytes long. Only the 64 bytes structure was taken into account. Signed-off-by: Frederic Bohe Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 9ecb92f..9ff7b1c 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -855,7 +855,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) */ /* Update group descriptor block for new group */ - gdp = (struct ext4_group_desc *)primary->b_data + gdb_off; + gdp = (struct ext4_group_desc *)((char *)primary->b_data + + gdb_off * EXT4_DESC_SIZE(sb)); ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */ ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */ -- cgit v0.10.2 From 89f5b7da2a6bad2e84670422ab8192382a5aeb9f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 11:18:25 -0700 Subject: Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit 557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") removed the ZERO_PAGE from the VM mappings, any users of get_user_pages() will generally now populate the VM with real empty pages needlessly. We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but since fault handling no longer uses ZERO_PAGE for new anonymous pages, we now need to handle that special case in follow_page() instead. In particular, the removal of ZERO_PAGE effectively removed the core file writing optimization where we would skip writing pages that had not been populated at all, and increased memory pressure a lot by allocating all those useless newly zeroed pages. This reinstates the optimization by making the unmapped PTE case the same as for a non-existent page table, which already did this correctly. While at it, this also fixes the XIP case for follow_page(), where the caller could not differentiate between the case of a page that simply could not be used (because it had no "struct page" associated with it) and a page that just wasn't mapped. We do that by simply returning an error pointer for pages that could not be turned into a "struct page *". The error is arbitrarily picked to be EFAULT, since that was what get_user_pages() already used for the equivalent IO-mapped page case. [ Also removed an impossible test for pte_offset_map_lock() failing: that's not how that function works ] Acked-by: Oleg Nesterov Acked-by: Nick Piggin Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Andrew Morton Cc: Ingo Molnar Cc: Roland McGrath Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index c21a626..ce245a8 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -142,7 +142,7 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg) printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT), page_count(pg), pg->flags); - if (upg/* && pg != upg*/) { + if (upg && !IS_ERR(upg) /* && pg != upg*/) { printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) << PAGE_SHIFT), page_count(upg), diff --git a/mm/memory.c b/mm/memory.c index 19e0ae9..9aefaae 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -999,17 +999,15 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address, goto no_page_table; ptep = pte_offset_map_lock(mm, pmd, address, &ptl); - if (!ptep) - goto out; pte = *ptep; if (!pte_present(pte)) - goto unlock; + goto no_page; if ((flags & FOLL_WRITE) && !pte_write(pte)) goto unlock; page = vm_normal_page(vma, address, pte); if (unlikely(!page)) - goto unlock; + goto bad_page; if (flags & FOLL_GET) get_page(page); @@ -1024,6 +1022,15 @@ unlock: out: return page; +bad_page: + pte_unmap_unlock(ptep, ptl); + return ERR_PTR(-EFAULT); + +no_page: + pte_unmap_unlock(ptep, ptl); + if (!pte_none(pte)) + return page; + /* Fall through to ZERO_PAGE handling */ no_page_table: /* * When core dumping an enormous anonymous area that nobody @@ -1159,6 +1166,8 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, cond_resched(); } + if (IS_ERR(page)) + return i ? i : PTR_ERR(page); if (pages) { pages[i] = page; diff --git a/mm/migrate.c b/mm/migrate.c index 449d77d..112bcae 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -865,6 +865,11 @@ static int do_move_pages(struct mm_struct *mm, struct page_to_node *pm, goto set_status; page = follow_page(vma, pp->addr, FOLL_GET); + + err = PTR_ERR(page); + if (IS_ERR(page)) + goto set_status; + err = -ENOENT; if (!page) goto set_status; @@ -928,6 +933,11 @@ static int do_pages_stat(struct mm_struct *mm, struct page_to_node *pm) goto set_status; page = follow_page(vma, pm->addr, 0); + + err = PTR_ERR(page); + if (IS_ERR(page)) + goto set_status; + err = -ENOENT; /* Use PageReserved to check for zero page */ if (!page || PageReserved(page)) -- cgit v0.10.2 From ce42a54946db338e43be9a89c0f7927e02aa3a16 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 20 Jun 2008 20:53:32 +0200 Subject: palm_bk3710: fix resource management The driver expected a *virtual* address in the IDE platform device's memory resource and didn't request the memory region for the register block. Fix this taking into account the fact that DaVinci SoC devices are fixed-mapped to the virtual memory early and we can get their virtual addresses using IO_ADDRESS() macro, not having to call ioremap()... While at it, also do some cosmetic changes... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index d024ac8..cc24803 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -353,8 +353,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) struct clk *clkp; struct resource *mem, *irq; ide_hwif_t *hwif; - void __iomem *base; - int pribase, i; + unsigned long base; + int i; hw_regs_t hw; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -374,22 +374,27 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) printk(KERN_ERR "failed to get memory region resource\n"); return -ENODEV; } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (irq == NULL) { printk(KERN_ERR "failed to get IRQ resource\n"); return -ENODEV; } - base = (void *)mem->start; + if (request_mem_region(mem->start, mem->end - mem->start + 1, + "palm_bk3710") == NULL) { + printk(KERN_ERR "failed to request memory region\n"); + return -EBUSY; + } + + base = IO_ADDRESS(mem->start); /* Configure the Palm Chip controller */ - palm_bk3710_chipinit(base); + palm_bk3710_chipinit((void __iomem *)base); - pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET; for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = pribase + i; - hw.io_ports.ctl_addr = mem->start + - IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; + hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; hw.irq = irq->start; hw.chipset = ide_palm3710; @@ -434,4 +439,3 @@ static int __init palm_bk3710_init(void) module_init(palm_bk3710_init); MODULE_LICENSE("GPL"); - -- cgit v0.10.2 From f54feafa6d47d0aa1a96adefdc763b708b02f94f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 20 Jun 2008 20:53:33 +0200 Subject: ide: increase timeout in wait_drive_not_busy() Some ATAPI devices take longer than the current max timeout value to become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout value to 10 ms. This fixes kernel.org bugzilla bug #10887: http://bugzilla.kernel.org/show_bug.cgi?id=10887 Reported-by: Masanari Iida Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0c908ca..ab545ff 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat; /* - * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms. + * Last sector was transfered, wait until device is ready. This can + * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ - for (retries = 0; retries < 100; retries++) { + for (retries = 0; retries < 1000; retries++) { stat = ide_read_status(drive); if (stat & BUSY_STAT) -- cgit v0.10.2 From 74e23386b7818c7edb1252f6661806dd34042db1 Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add an pata/ide ID Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 3d39f9d..c97bc0c 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -414,6 +414,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index f633b6b..655f43a 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -439,6 +439,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), -- cgit v0.10.2 From a17bf220231a5061a29a27a99a273246eb3b156e Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add another pata/ide ID Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters Signed-off-by: Kristoffer Ericson CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index c97bc0c..41b4361 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -425,6 +425,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 655f43a..7fde9b6 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -450,6 +450,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), -- cgit v0.10.2 From a49c06bfe48c43b4fea4d3789807d8393828ca8a Mon Sep 17 00:00:00 2001 From: Christophe Niclaes Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia ide kingston compactflash's have a new manufacturer id Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes Acked-by: Philippe De Muyter Cc: Alan Cox Cc: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 7fde9b6..3381424 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -410,6 +410,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ -- cgit v0.10.2 From ac1623625c5818bbdf5c68973098ba386ba7a004 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 20 Jun 2008 20:53:35 +0200 Subject: BAST: Remove old IDE driver Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1607536..8e07de2 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -823,13 +823,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config BLK_DEV_IDE_BAST - tristate "Simtec BAST / Thorcom VR1000 IDE support" - depends on ARM && (ARCH_BAST || MACH_VR1000) - help - Say Y here if you want to support the onboard IDE channels on the - Simtec BAST or the Thorcom VR1000 - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 936e7b0..5bc2605 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c deleted file mode 100644 index 8e8c281..0000000 --- a/drivers/ide/arm/bast-ide.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -#define DRV_NAME "bast-ide" - -static int __init bastide_register(unsigned int base, unsigned int aux, int irq) -{ - ide_hwif_t *hwif; - hw_regs_t hw; - int i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - memset(&hw, 0, sizeof(hw)); - - base += BAST_IDE_CS; - aux += BAST_IDE_CS; - - for (i = 0; i <= 7; i++) { - hw.io_ports_array[i] = (unsigned long)base; - base += 0x20; - } - - hw.io_ports.ctl_addr = aux + (6 * 0x20); - hw.irq = irq; - hw.chipset = ide_generic; - - hwif = ide_find_port(); - if (hwif == NULL) - goto out; - - i = hwif->index; - - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->port_ops = NULL; - - idx[0] = i; - - ide_device_add(idx, NULL); -out: - return 0; -} - -static int __init bastide_init(void) -{ - unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; - - /* we can treat the VR1000 and the BAST the same */ - - if (!(machine_is_bast() || machine_is_vr1000())) - return 0; - - printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); - - if (!request_mem_region(base, 0x400000, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); - bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); - - return 0; -} - -module_init(bastide_init); - -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v0.10.2 From e0c6d97c65e0784aade7e97b9411f245a6c543e7 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 20 Jun 2008 12:02:00 -0700 Subject: [IA64] SN2: security hole in sn2_ptc_proc_write Security hole in sn2_ptc_proc_write It is possible to overrun a buffer with a write to this /proc file. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 49d3120..6dd886c 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si int cpu; char optstr[64]; + if (count > sizeof(optstr)) + return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; optstr[count - 1] = '\0'; -- cgit v0.10.2 From 1f6ef2342972dc7fd623f360f84006e2304eb935 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 12:19:28 -0700 Subject: [watchdog] hpwdt: fix use of inline assembly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken, and included all the function prologue and epilogue stuff, even though it was itself then inside a C function where the compiler would add its own prologue and epilogue on top of it all. This then just _happened_ to work if you had exactly the right compiler version and exactly the right compiler flags, so that gcc just happened to not create any prologue at all (the gcc-generated epilogue wouldn't matter, since it would never be reached). But the more proper way to fix it is to simply not do this. Move the inline asm to the top level, with no surrounding function at all (the better alternative would be to remove the prologue and make it actually use proper description of the arguments to the inline asm, but that's a bigger change than the one I'm willing to make right now). Tested-by: S.ÇaÄŸlar Onur Acked-by: Thomas Mingarelli Signed-off-by: Linus Torvalds diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 2686f3e..eaa3f2a 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -140,49 +140,53 @@ static struct pci_device_id hpwdt_devices[] = { }; MODULE_DEVICE_TABLE(pci, hpwdt_devices); +extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry); + #ifndef CONFIG_X86_64 /* --32 Bit Bios------------------------------------------------------------ */ #define HPWDT_ARCH 32 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushl %ebp \n\t" - "movl %esp, %ebp \n\t" - "pusha \n\t" - "pushf \n\t" - "push %es \n\t" - "push %ds \n\t" - "pop %es \n\t" - "movl 8(%ebp),%eax \n\t" - "movl 4(%eax),%ebx \n\t" - "movl 8(%eax),%ecx \n\t" - "movl 12(%eax),%edx \n\t" - "movl 16(%eax),%esi \n\t" - "movl 20(%eax),%edi \n\t" - "movl (%eax),%eax \n\t" - "push %cs \n\t" - "call *12(%ebp) \n\t" - "pushf \n\t" - "pushl %eax \n\t" - "movl 8(%ebp),%eax \n\t" - "movl %ebx,4(%eax) \n\t" - "movl %ecx,8(%eax) \n\t" - "movl %edx,12(%eax) \n\t" - "movl %esi,16(%eax) \n\t" - "movl %edi,20(%eax) \n\t" - "movw %ds,24(%eax) \n\t" - "movw %es,26(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,28(%eax) \n\t" - "pop %es \n\t" - "popf \n\t" - "popa \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushl %ebp \n\t" + "movl %esp, %ebp \n\t" + "pusha \n\t" + "pushf \n\t" + "push %es \n\t" + "push %ds \n\t" + "pop %es \n\t" + "movl 8(%ebp),%eax \n\t" + "movl 4(%eax),%ebx \n\t" + "movl 8(%eax),%ecx \n\t" + "movl 12(%eax),%edx \n\t" + "movl 16(%eax),%esi \n\t" + "movl 20(%eax),%edi \n\t" + "movl (%eax),%eax \n\t" + "push %cs \n\t" + "call *12(%ebp) \n\t" + "pushf \n\t" + "pushl %eax \n\t" + "movl 8(%ebp),%eax \n\t" + "movl %ebx,4(%eax) \n\t" + "movl %ecx,8(%eax) \n\t" + "movl %edx,12(%eax) \n\t" + "movl %esi,16(%eax) \n\t" + "movl %edi,20(%eax) \n\t" + "movw %ds,24(%eax) \n\t" + "movw %es,26(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,28(%eax) \n\t" + "pop %es \n\t" + "popf \n\t" + "popa \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); + /* * cru_detect @@ -333,43 +337,44 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushq %rbp \n\t" - "movq %rsp, %rbp \n\t" - "pushq %rax \n\t" - "pushq %rbx \n\t" - "pushq %rdx \n\t" - "pushq %r12 \n\t" - "pushq %r9 \n\t" - "movq %rsi, %r12 \n\t" - "movq %rdi, %r9 \n\t" - "movl 4(%r9),%ebx \n\t" - "movl 8(%r9),%ecx \n\t" - "movl 12(%r9),%edx \n\t" - "movl 16(%r9),%esi \n\t" - "movl 20(%r9),%edi \n\t" - "movl (%r9),%eax \n\t" - "call *%r12 \n\t" - "pushfq \n\t" - "popq %r12 \n\t" - "popfq \n\t" - "movl %eax, (%r9) \n\t" - "movl %ebx, 4(%r9) \n\t" - "movl %ecx, 8(%r9) \n\t" - "movl %edx, 12(%r9) \n\t" - "movl %esi, 16(%r9) \n\t" - "movl %edi, 20(%r9) \n\t" - "movq %r12, %rax \n\t" - "movl %eax, 28(%r9) \n\t" - "popq %r9 \n\t" - "popq %r12 \n\t" - "popq %rdx \n\t" - "popq %rbx \n\t" - "popq %rax \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushq %rbp \n\t" + "movq %rsp, %rbp \n\t" + "pushq %rax \n\t" + "pushq %rbx \n\t" + "pushq %rdx \n\t" + "pushq %r12 \n\t" + "pushq %r9 \n\t" + "movq %rsi, %r12 \n\t" + "movq %rdi, %r9 \n\t" + "movl 4(%r9),%ebx \n\t" + "movl 8(%r9),%ecx \n\t" + "movl 12(%r9),%edx \n\t" + "movl 16(%r9),%esi \n\t" + "movl 20(%r9),%edi \n\t" + "movl (%r9),%eax \n\t" + "call *%r12 \n\t" + "pushfq \n\t" + "popq %r12 \n\t" + "popfq \n\t" + "movl %eax, (%r9) \n\t" + "movl %ebx, 4(%r9) \n\t" + "movl %ecx, 8(%r9) \n\t" + "movl %edx, 12(%r9) \n\t" + "movl %esi, 16(%r9) \n\t" + "movl %edi, 20(%r9) \n\t" + "movq %r12, %rax \n\t" + "movl %eax, 28(%r9) \n\t" + "popq %r9 \n\t" + "popq %r12 \n\t" + "popq %rdx \n\t" + "popq %rbx \n\t" + "popq %rax \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); /* * dmi_find_cru -- cgit v0.10.2 From d70ac829b7f42d7ef4f879635c6a772b0b4ed0a2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 16:19:44 -0700 Subject: Linux 2.6.26-rc7 diff --git a/Makefile b/Makefile index 6923d66..2b4977c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v0.10.2 From 9267b4b3880d00dc2dab90f1d817c856939114f7 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:25:39 +0400 Subject: alpha: fix module load failures on smp (bug #10926) To calculate addresses of locally defined variables, GCC uses 32-bit displacement from the GP. Which doesn't work for per cpu variables in modules, as an offset to the kernel per cpu area is way above 4G. The workaround is to force allocation of a GOT entry for per cpu variable using ldq instruction with a 'literal' relocation. I had to use custom asm/percpu.h, as a required argument magic doesn't work with asm-generic/percpu.h macros. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h index 48348fe..82e8a94 100644 --- a/include/asm-alpha/percpu.h +++ b/include/asm-alpha/percpu.h @@ -1,6 +1,76 @@ #ifndef __ALPHA_PERCPU_H #define __ALPHA_PERCPU_H +#include +#include -#include +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +#ifdef CONFIG_SMP + +/* + * per_cpu_offset() is the offset that has to be added to a + * percpu variable to get to the instance for a certain processor. + */ +extern unsigned long __per_cpu_offset[NR_CPUS]; + +#define per_cpu_offset(x) (__per_cpu_offset[x]) + +#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id()) +#ifdef CONFIG_DEBUG_PREEMPT +#define my_cpu_offset per_cpu_offset(smp_processor_id()) +#else +#define my_cpu_offset __my_cpu_offset +#endif + +#ifndef MODULE +#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) +#define PER_CPU_ATTRIBUTES +#else +/* + * To calculate addresses of locally defined variables, GCC uses 32-bit + * displacement from the GP. Which doesn't work for per cpu variables in + * modules, as an offset to the kernel per cpu area is way above 4G. + * + * This forces allocation of a GOT entry for per cpu variable using + * ldq instruction with a 'literal' relocation. + */ +#define SHIFT_PERCPU_PTR(var, offset) ({ \ + extern int simple_identifier_##var(void); \ + unsigned long __ptr, tmp_gp; \ + asm ( "br %1, 1f \n\ + 1: ldgp %1, 0(%1) \n\ + ldq %0, per_cpu__" #var"(%1)\t!literal" \ + : "=&r"(__ptr), "=&r"(tmp_gp)); \ + (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) + +#define PER_CPU_ATTRIBUTES __used + +#endif /* MODULE */ + +/* + * A percpu variable may point to a discarded regions. The following are + * established ways to produce a usable pointer from the percpu variable + * offset. + */ +#define per_cpu(var, cpu) \ + (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu))) +#define __get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, my_cpu_offset)) +#define __raw_get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, __my_cpu_offset)) + +#else /* ! SMP */ + +#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var))) +#define __get_cpu_var(var) per_cpu_var(var) +#define __raw_get_cpu_var(var) per_cpu_var(var) + +#endif /* SMP */ + +#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) #endif /* __ALPHA_PERCPU_H */ -- cgit v0.10.2 From ede426923b25414f5ec9c00fefe6727d9721dd13 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:26:21 +0400 Subject: alpha: link failure fix With built-in scsi disk driver, the final link fails with a following error: `.exit.text' referenced in section `.rodata' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o This happens with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE=y) with all gcc-4 versions, and also with -O2 and gcc-4.3. The problem is in sd.c:sd_major() being inlined into __exit function exit_sd(), and the compiler generating a jump table in .rodata section for the 'switch' statement in sd_major(). So we have references to discarded section. Fixed with a big hammer in the form of -fno-jump-tables. Note that jump tables vs. discarded sections is a generic problem, other architectures are just lucky not to suffer from it. But with a slightly more complex switch/case statement it can be reproduced on x86 as well. So maybe at some point we should consider -fno-jump-tables as a generic compile option... Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile index 4e1a8e2..4759fe7 100644 --- a/arch/alpha/Makefile +++ b/arch/alpha/Makefile @@ -13,6 +13,7 @@ NM := $(NM) -B LDFLAGS_vmlinux := -static -N #-relax CHECKFLAGS += -D__alpha__ -m64 cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data +cflags-y += $(call cc-option, -fno-jump-tables) cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5 -- cgit v0.10.2 From d559d4a24a3fed75bd890abcc1f95cd8d8dad6e1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:28:31 +0400 Subject: alpha: fix compile failures with gcc-4.3 (bug #10438) Vast majority of these build failures are gcc-4.3 warnings about static functions and objects being referenced from non-static (read: "extern inline") functions, in conjunction with our -Werror. We cannot just convert "extern inline" to "static inline", as people keep suggesting all the time, because "extern inline" logic is crucial for generic kernel build. So - just make sure that all callees of critical "extern inline" functions are also "extern inline"; - use "static inline", wherever it's possible. traps.c: work around gcc-4.3 being too smart about array bounds-checking. TODO: add "gnu_inline" attribute to all our "extern inline" functions to ensure desired behaviour with future compilers. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c index c075029..d9980d4 100644 --- a/arch/alpha/kernel/core_t2.c +++ b/arch/alpha/kernel/core_t2.c @@ -74,6 +74,8 @@ # define DBG(args) #endif +DEFINE_SPINLOCK(t2_hae_lock); + static volatile unsigned int t2_mcheck_any_expected; static volatile unsigned int t2_mcheck_last_taken; diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index dc57790..c778779 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -447,7 +447,7 @@ struct unaligned_stat { /* Macro for exception fixup code to access integer registers. */ -#define una_reg(r) (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) +#define una_reg(r) (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) asmlinkage void @@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg, { long error, tmp1, tmp2, tmp3, tmp4; unsigned long pc = regs->pc - 4; + unsigned long *_regs = regs->regs; const struct exception_table_entry *fixup; unaligned[0].count++; diff --git a/include/asm-alpha/core_mcpcia.h b/include/asm-alpha/core_mcpcia.h index 525b4f6..acf55b4 100644 --- a/include/asm-alpha/core_mcpcia.h +++ b/include/asm-alpha/core_mcpcia.h @@ -261,7 +261,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck { } #endif -static inline int __mcpcia_is_mmio(unsigned long addr) +extern inline int __mcpcia_is_mmio(unsigned long addr) { return (addr & 0x80000000UL) == 0; } diff --git a/include/asm-alpha/core_t2.h b/include/asm-alpha/core_t2.h index 90e6b5d..46bfff5 100644 --- a/include/asm-alpha/core_t2.h +++ b/include/asm-alpha/core_t2.h @@ -356,13 +356,13 @@ struct el_t2_frame_corrected { #define vip volatile int * #define vuip volatile unsigned int * -static inline u8 t2_inb(unsigned long addr) +extern inline u8 t2_inb(unsigned long addr) { long result = *(vip) ((addr << 5) + T2_IO + 0x00); return __kernel_extbl(result, addr & 3); } -static inline void t2_outb(u8 b, unsigned long addr) +extern inline void t2_outb(u8 b, unsigned long addr) { unsigned long w; @@ -371,13 +371,13 @@ static inline void t2_outb(u8 b, unsigned long addr) mb(); } -static inline u16 t2_inw(unsigned long addr) +extern inline u16 t2_inw(unsigned long addr) { long result = *(vip) ((addr << 5) + T2_IO + 0x08); return __kernel_extwl(result, addr & 3); } -static inline void t2_outw(u16 b, unsigned long addr) +extern inline void t2_outw(u16 b, unsigned long addr) { unsigned long w; @@ -386,12 +386,12 @@ static inline void t2_outw(u16 b, unsigned long addr) mb(); } -static inline u32 t2_inl(unsigned long addr) +extern inline u32 t2_inl(unsigned long addr) { return *(vuip) ((addr << 5) + T2_IO + 0x18); } -static inline void t2_outl(u32 b, unsigned long addr) +extern inline void t2_outl(u32 b, unsigned long addr) { *(vuip) ((addr << 5) + T2_IO + 0x18) = b; mb(); @@ -435,7 +435,7 @@ static inline void t2_outl(u32 b, unsigned long addr) set_hae(msb); \ } -static DEFINE_SPINLOCK(t2_hae_lock); +extern spinlock_t t2_hae_lock; /* * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since diff --git a/include/asm-alpha/io.h b/include/asm-alpha/io.h index 38f18cf..e971ab0 100644 --- a/include/asm-alpha/io.h +++ b/include/asm-alpha/io.h @@ -35,7 +35,7 @@ * register not being up-to-date with respect to the hardware * value. */ -static inline void __set_hae(unsigned long new_hae) +extern inline void __set_hae(unsigned long new_hae) { unsigned long flags; local_irq_save(flags); @@ -49,7 +49,7 @@ static inline void __set_hae(unsigned long new_hae) local_irq_restore(flags); } -static inline void set_hae(unsigned long new_hae) +extern inline void set_hae(unsigned long new_hae) { if (new_hae != alpha_mv.hae_cache) __set_hae(new_hae); @@ -176,7 +176,7 @@ REMAP2(u64, writeq, volatile) #undef REMAP1 #undef REMAP2 -static inline void __iomem *generic_ioportmap(unsigned long a) +extern inline void __iomem *generic_ioportmap(unsigned long a) { return alpha_mv.mv_ioportmap(a); } diff --git a/include/asm-alpha/mmu_context.h b/include/asm-alpha/mmu_context.h index 6a5be1f..86c08a0 100644 --- a/include/asm-alpha/mmu_context.h +++ b/include/asm-alpha/mmu_context.h @@ -23,7 +23,7 @@ #endif -extern inline unsigned long +static inline unsigned long __reload_thread(struct pcb_struct *pcb) { register unsigned long a0 __asm__("$16"); @@ -114,7 +114,7 @@ extern unsigned long last_asn; #define __MMU_EXTERN_INLINE #endif -static inline unsigned long +extern inline unsigned long __get_new_mm_context(struct mm_struct *mm, long cpu) { unsigned long asn = cpu_last_asn(cpu); @@ -226,7 +226,7 @@ ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) # endif #endif -extern inline int +static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { int i; diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h index ed221d6..afe20fa 100644 --- a/include/asm-alpha/system.h +++ b/include/asm-alpha/system.h @@ -184,7 +184,7 @@ enum amask_enum { __amask; }) #define __CALL_PAL_R0(NAME, TYPE) \ -static inline TYPE NAME(void) \ +extern inline TYPE NAME(void) \ { \ register TYPE __r0 __asm__("$0"); \ __asm__ __volatile__( \ @@ -196,7 +196,7 @@ static inline TYPE NAME(void) \ } #define __CALL_PAL_W1(NAME, TYPE0) \ -static inline void NAME(TYPE0 arg0) \ +extern inline void NAME(TYPE0 arg0) \ { \ register TYPE0 __r16 __asm__("$16") = arg0; \ __asm__ __volatile__( \ @@ -207,7 +207,7 @@ static inline void NAME(TYPE0 arg0) \ } #define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \ -static inline void NAME(TYPE0 arg0, TYPE1 arg1) \ +extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \ { \ register TYPE0 __r16 __asm__("$16") = arg0; \ register TYPE1 __r17 __asm__("$17") = arg1; \ @@ -219,7 +219,7 @@ static inline void NAME(TYPE0 arg0, TYPE1 arg1) \ } #define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \ -static inline RTYPE NAME(TYPE0 arg0) \ +extern inline RTYPE NAME(TYPE0 arg0) \ { \ register RTYPE __r0 __asm__("$0"); \ register TYPE0 __r16 __asm__("$16") = arg0; \ @@ -232,7 +232,7 @@ static inline RTYPE NAME(TYPE0 arg0) \ } #define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \ -static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \ +extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \ { \ register RTYPE __r0 __asm__("$0"); \ register TYPE0 __r16 __asm__("$16") = arg0; \ diff --git a/include/asm-alpha/vga.h b/include/asm-alpha/vga.h index e8df1e7..c00106b 100644 --- a/include/asm-alpha/vga.h +++ b/include/asm-alpha/vga.h @@ -13,7 +13,7 @@ #define VT_BUF_HAVE_MEMSETW #define VT_BUF_HAVE_MEMCPYW -extern inline void scr_writew(u16 val, volatile u16 *addr) +static inline void scr_writew(u16 val, volatile u16 *addr) { if (__is_ioaddr(addr)) __raw_writew(val, (volatile u16 __iomem *) addr); @@ -21,7 +21,7 @@ extern inline void scr_writew(u16 val, volatile u16 *addr) *addr = val; } -extern inline u16 scr_readw(volatile const u16 *addr) +static inline u16 scr_readw(volatile const u16 *addr) { if (__is_ioaddr(addr)) return __raw_readw((volatile const u16 __iomem *) addr); @@ -29,7 +29,7 @@ extern inline u16 scr_readw(volatile const u16 *addr) return *addr; } -extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count) +static inline void scr_memsetw(u16 *s, u16 c, unsigned int count) { if (__is_ioaddr(s)) memsetw_io((u16 __iomem *) s, c, count); -- cgit v0.10.2 From a744e0160ac5804b763449aa34d3991dc21af0be Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:28:54 +0400 Subject: alpha: resurrect Cypress IDE quirk Which was removed in the hope that generic legacy IDE quirk in drivers/pci/probe.c is sufficient for Cypress IDE. It isn't, as this controller has non-standard BAR layout: secondary channel registers are in the BAR0-1 of the second PCI function - not in the BAR2-3 of the same function, as the generic quirk routine assumes. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 36ab22a..5cf45fc 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i static void __init quirk_cypress(struct pci_dev *dev) { + /* The Notorious Cy82C693 chip. */ + + /* The generic legacy mode IDE fixup in drivers/pci/probe.c + doesn't work correctly with the Cypress IDE controller as + it has non-standard register layout. Fix that. */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) { + dev->resource[2].start = dev->resource[3].start = 0; + dev->resource[2].end = dev->resource[3].end = 0; + dev->resource[2].flags = dev->resource[3].flags = 0; + if (PCI_FUNC(dev->devfn) == 2) { + dev->resource[0].start = 0x170; + dev->resource[0].end = 0x177; + dev->resource[1].start = 0x376; + dev->resource[1].end = 0x376; + } + } + /* The Cypress bridge responds on the PCI bus in the address range 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no way to turn this off. The bridge also supports several extended -- cgit v0.10.2 From 71c2742f5e6348d76ee62085cf0a13e5eff0f00e Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sat, 21 Jun 2008 19:01:02 +0200 Subject: Add return value to reserve_bootmem_node() This patch changes the function reserve_bootmem_node() from void to int, returning -ENOMEM if the allocation fails. This fixes a build problem on x86 with CONFIG_KEXEC=y and CONFIG_NEED_MULTIPLE_NODES=y Signed-off-by: Bernhard Walle Reported-by: Adrian Bunk Signed-off-by: Linus Torvalds diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 6a5dbdc..686895b 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -94,7 +94,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn); -extern void reserve_bootmem_node(pg_data_t *pgdat, +extern int reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, unsigned long size, int flags); diff --git a/mm/bootmem.c b/mm/bootmem.c index e8fb927..8d9f60e 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -442,15 +442,17 @@ unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn, return init_bootmem_core(pgdat, freepfn, startpfn, endpfn); } -void __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, +int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, unsigned long size, int flags) { int ret; ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags); if (ret < 0) - return; + return -ENOMEM; reserve_bootmem_core(pgdat->bdata, physaddr, size, flags); + + return 0; } void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, -- cgit v0.10.2 From 481c5346d0981940ee63037eb53e4e37b0735c10 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 21 Jun 2008 16:46:35 -0700 Subject: Slab: Fix memory leak in fallback_alloc() The zonelist patches caused the loop that checks for available objects in permitted zones to not terminate immediately. One object per zone per allocation may be allocated and then abandoned. Break the loop when we have successfully allocated one object. Signed-off-by: Christoph Lameter Signed-off-by: Linus Torvalds diff --git a/mm/slab.c b/mm/slab.c index 06236e4..046607f 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -3263,9 +3263,12 @@ retry: if (cpuset_zone_allowed_hardwall(zone, flags) && cache->nodelists[nid] && - cache->nodelists[nid]->free_objects) + cache->nodelists[nid]->free_objects) { obj = ____cache_alloc_node(cache, flags | GFP_THISNODE, nid); + if (obj) + break; + } } if (!obj) { -- cgit v0.10.2 From f1edfc420ac7beb90b27bf822036cbbfa32483f1 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 22 Jun 2008 04:27:25 +0100 Subject: [ARM] 5115/1: pxafb: fix ifdef for command line option handling This bug was found and fixed by Lothar Wassmann. Previously, the use of ifndef CONFIG_MODULES made it such that pxafb command line option parsing was dependent on whether the kernel was built with module support. The ifndef should be MODULE so that parsing is dependent only on whether the driver is built-in or not. Signed-off-by: Jaya Kumar Acked-by: Krzysztof Helt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 7dcda18..eb23d19 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1588,7 +1588,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options) static char g_options[256] __devinitdata = ""; -#ifndef CONFIG_MODULES +#ifndef MODULE static int __devinit pxafb_setup_options(void) { char *options = NULL; -- cgit v0.10.2 From ee98476bbc565f8fe42e198602e647288b6a258d Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 22 Jun 2008 04:27:26 +0100 Subject: [ARM] 5116/1: pxafb: cleanup and fix order of failure handling This issue was found by Krzysztof Helt and Eric Miao. pxafb had issues in the order with which it cleaned up if errors occurred during a probe. This patch reorders the failure handling sequence and also frees the cmap and clk. Signed-off-by: Jaya Kumar Acked-by: Krzysztof Helt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index eb23d19..796e0d1 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1685,14 +1685,14 @@ static int __init pxafb_probe(struct platform_device *dev) if (r == NULL) { dev_err(&dev->dev, "no I/O memory resource defined\n"); ret = -ENODEV; - goto failed; + goto failed_fbi; } r = request_mem_region(r->start, r->end - r->start + 1, dev->name); if (r == NULL) { dev_err(&dev->dev, "failed to request I/O memory\n"); ret = -EBUSY; - goto failed; + goto failed_fbi; } fbi->mmio_base = ioremap(r->start, r->end - r->start + 1); @@ -1735,8 +1735,17 @@ static int __init pxafb_probe(struct platform_device *dev) * This makes sure that our colour bitfield * descriptors are correctly initialised. */ - pxafb_check_var(&fbi->fb.var, &fbi->fb); - pxafb_set_par(&fbi->fb); + ret = pxafb_check_var(&fbi->fb.var, &fbi->fb); + if (ret) { + dev_err(&dev->dev, "failed to get suitable mode\n"); + goto failed_free_irq; + } + + ret = pxafb_set_par(&fbi->fb); + if (ret) { + dev_err(&dev->dev, "Failed to set parameters\n"); + goto failed_free_irq; + } platform_set_drvdata(dev, fbi); @@ -1744,7 +1753,7 @@ static int __init pxafb_probe(struct platform_device *dev) if (ret < 0) { dev_err(&dev->dev, "Failed to register framebuffer device: %d\n", ret); - goto failed_free_irq; + goto failed_free_cmap; } #ifdef CONFIG_CPU_FREQ @@ -1763,18 +1772,23 @@ static int __init pxafb_probe(struct platform_device *dev) return 0; +failed_free_cmap: + if (fbi->fb.cmap.len) + fb_dealloc_cmap(&fbi->fb.cmap); failed_free_irq: free_irq(irq, fbi); -failed_free_res: - release_mem_region(r->start, r->end - r->start + 1); -failed_free_io: - iounmap(fbi->mmio_base); failed_free_mem: dma_free_writecombine(&dev->dev, fbi->map_size, fbi->map_cpu, fbi->map_dma); -failed: +failed_free_io: + iounmap(fbi->mmio_base); +failed_free_res: + release_mem_region(r->start, r->end - r->start + 1); +failed_fbi: + clk_put(fbi->clk); platform_set_drvdata(dev, NULL); kfree(fbi); +failed: return ret; } -- cgit v0.10.2 From e5a2c9ccb3e849fed70674ac6880536eaf553dba Mon Sep 17 00:00:00 2001 From: Uli Luckas Date: Wed, 18 Jun 2008 09:54:03 +0100 Subject: [ARM] 5109/1: Mark rtc sa1100 driver as wakeup source before registering it Mark rtc sa1100 driver as wakeup source before registering it. rtc_device_register evaluates device_can_wakeup(rtc->dev.parent) and supresses the creation of /sys/class/rtc/rtcX/wakealarm if device_can_wakeup is not (yet) true. Signed-off-by: Uli Luckas Signed-off-by: Russell King diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 82f62d2..67421b0d 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -331,14 +331,14 @@ static int sa1100_rtc_probe(struct platform_device *pdev) RCNR = 0; } + device_init_wakeup(&pdev->dev, 1); + rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) return PTR_ERR(rtc); - device_init_wakeup(&pdev->dev, 1); - platform_set_drvdata(pdev, rtc); return 0; -- cgit v0.10.2 From fc6e14f4fb50bc734d08e65eb8a5798d54a2ad77 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 22 Jun 2008 15:41:30 +0100 Subject: [ARM] Export dma_sync_sg_for_device() Noticed by Martin Michlmayr, this missing export prevents IEEE1394 from building with: ERROR: "dma_sync_sg_for_device" [drivers/ieee1394/ieee1394.ko] undefined! Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 52fc6a8..2744673 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -650,7 +650,8 @@ EXPORT_SYMBOL(dma_map_sg); EXPORT_SYMBOL(dma_unmap_sg); EXPORT_SYMBOL(dma_sync_single_for_cpu); EXPORT_SYMBOL(dma_sync_single_for_device); -EXPORT_SYMBOL(dma_sync_sg); +EXPORT_SYMBOL(dma_sync_sg_for_cpu); +EXPORT_SYMBOL(dma_sync_sg_for_device); EXPORT_SYMBOL(dmabounce_register_dev); EXPORT_SYMBOL(dmabounce_unregister_dev); -- cgit v0.10.2 From 55d8538498f62ec72b5ba67aa386c7726f630475 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 22 Jun 2008 12:23:15 -0700 Subject: Fix performance regression on lmbench select benchmark Christian Borntraeger reported that reinstating cond_resched() with CONFIG_PREEMPT caused a performance regression on lmbench: For example select file 500: 23 microseconds 32 microseconds and that's really because we totally unnecessarily do the cond_resched() in the innermost loop of select(), which is just silly. This moves it out from the innermost loop (which only ever loops ove the bits in a single "unsigned long" anyway), which makes the performance regression go away. Reported-and-tested-by: Christian Borntraeger Signed-off-by: Linus Torvalds diff --git a/fs/select.c b/fs/select.c index 8dda969..da0e882 100644 --- a/fs/select.c +++ b/fs/select.c @@ -249,7 +249,6 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout) retval++; } } - cond_resched(); } if (res_in) *rinp = res_in; @@ -257,6 +256,7 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout) *routp = res_out; if (res_ex) *rexp = res_ex; + cond_resched(); } wait = NULL; if (retval || !*timeout || signal_pending(current)) -- cgit v0.10.2 From 44e051773da465f8c92127914bc784770e0e2a28 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Jun 2008 11:54:05 +0200 Subject: ALSA: aw2 - Fix Oops at initialization The irq handler may be called before the proper initialization of hardware. Call snd_aw2_saa7146_setup() before the irq handler registration. Signed-off-by: Takashi Iwai diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c index 56f87cd..3f00ddf 100644 --- a/sound/pci/aw2/aw2-alsa.c +++ b/sound/pci/aw2/aw2-alsa.c @@ -316,6 +316,8 @@ static int __devinit snd_aw2_create(struct snd_card *card, return -ENOMEM; } + /* (2) initialization of the chip hardware */ + snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt); if (request_irq(pci->irq, snd_aw2_saa7146_interrupt, IRQF_SHARED, "Audiowerk2", chip)) { @@ -329,8 +331,6 @@ static int __devinit snd_aw2_create(struct snd_card *card, } chip->irq = pci->irq; - /* (2) initialization of the chip hardware */ - snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt); err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); if (err < 0) { free_irq(chip->irq, (void *)chip); -- cgit v0.10.2 From 3e14b50dd4a3178f4f635267a2706b5d4f8c61ee Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Jun 2008 11:58:06 +0200 Subject: ALSA: sb - Fix wrong assertions snd_assert() in save_mixer() and restore_mixer() in sb_mixer.c is just wrong. The debug code wasn't tested at all, obviously... Signed-off-by: Takashi Iwai diff --git a/sound/isa/sb/sb_mixer.c b/sound/isa/sb/sb_mixer.c index 91d1422..73d4572 100644 --- a/sound/isa/sb/sb_mixer.c +++ b/sound/isa/sb/sb_mixer.c @@ -925,7 +925,7 @@ static unsigned char als4000_saved_regs[] = { static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs) { unsigned char *val = chip->saved_regs; - snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return); + snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return); for (; num_regs; num_regs--) *val++ = snd_sbmixer_read(chip, *regs++); } @@ -933,7 +933,7 @@ static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs) static void restore_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs) { unsigned char *val = chip->saved_regs; - snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return); + snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return); for (; num_regs; num_regs--) snd_sbmixer_write(chip, *regs++, *val++); } -- cgit v0.10.2 From 1b7558e457ed0de61023cfc913d2c342c7c3d9f2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 23 Jun 2008 11:21:58 +0200 Subject: futexes: fix fault handling in futex_lock_pi This patch addresses a very sporadic pi-futex related failure in highly threaded java apps on large SMP systems. David Holmes reported that the pi_state consistency check in lookup_pi_state triggered with his test application. This means that the kernel internal pi_state and the user space futex variable are out of sync. First we assumed that this is a user space data corruption, but deeper investigation revieled that the problem happend because the pi-futex code is not handling a fault in the futex_lock_pi path when the user space variable needs to be fixed up. The fault happens when a fork mapped the anon memory which contains the futex readonly for COW or the page got swapped out exactly between the unlock of the futex and the return of either the new futex owner or the task which was the expected owner but failed to acquire the kernel internal rtmutex. The current futex_lock_pi() code drops out with an inconsistent in case it faults and returns -EFAULT to user space. User space has no way to fixup that state. When we wrote this code we thought that we could not drop the hash bucket lock at this point to handle the fault. After analysing the code again it turned out to be wrong because there are only two tasks involved which might modify the pi_state and the user space variable: - the task which acquired the rtmutex - the pending owner of the pi_state which did not get the rtmutex Both tasks drop into the fixup_pi_state() function before returning to user space. The first task which acquired the hash bucket lock faults in the fixup of the user space variable, drops the spinlock and calls futex_handle_fault() to fault in the page. Now the second task could acquire the hash bucket lock and tries to fixup the user space variable as well. It either faults as well or it succeeds because the first task already faulted the page in. One caveat is to avoid a double fixup. After returning from the fault handling we reacquire the hash bucket lock and check whether the pi_state owner has been modified already. Reported-by: David Holmes Signed-off-by: Thomas Gleixner Cc: Andrew Morton Cc: David Holmes Cc: Peter Zijlstra Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Signed-off-by: Ingo Molnar kernel/futex.c | 93 ++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 73 insertions(+), 20 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index 449def8..7d1136e 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1096,21 +1096,64 @@ static void unqueue_me_pi(struct futex_q *q) * private futexes. */ static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q, - struct task_struct *newowner) + struct task_struct *newowner, + struct rw_semaphore *fshared) { u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS; struct futex_pi_state *pi_state = q->pi_state; + struct task_struct *oldowner = pi_state->owner; u32 uval, curval, newval; - int ret; + int ret, attempt = 0; /* Owner died? */ + if (!pi_state->owner) + newtid |= FUTEX_OWNER_DIED; + + /* + * We are here either because we stole the rtmutex from the + * pending owner or we are the pending owner which failed to + * get the rtmutex. We have to replace the pending owner TID + * in the user space variable. This must be atomic as we have + * to preserve the owner died bit here. + * + * Note: We write the user space value _before_ changing the + * pi_state because we can fault here. Imagine swapped out + * pages or a fork, which was running right before we acquired + * mmap_sem, that marked all the anonymous memory readonly for + * cow. + * + * Modifying pi_state _before_ the user space value would + * leave the pi_state in an inconsistent state when we fault + * here, because we need to drop the hash bucket lock to + * handle the fault. This might be observed in the PID check + * in lookup_pi_state. + */ +retry: + if (get_futex_value_locked(&uval, uaddr)) + goto handle_fault; + + while (1) { + newval = (uval & FUTEX_OWNER_DIED) | newtid; + + curval = cmpxchg_futex_value_locked(uaddr, uval, newval); + + if (curval == -EFAULT) + goto handle_fault; + if (curval == uval) + break; + uval = curval; + } + + /* + * We fixed up user space. Now we need to fix the pi_state + * itself. + */ if (pi_state->owner != NULL) { spin_lock_irq(&pi_state->owner->pi_lock); WARN_ON(list_empty(&pi_state->list)); list_del_init(&pi_state->list); spin_unlock_irq(&pi_state->owner->pi_lock); - } else - newtid |= FUTEX_OWNER_DIED; + } pi_state->owner = newowner; @@ -1118,26 +1161,35 @@ static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q, WARN_ON(!list_empty(&pi_state->list)); list_add(&pi_state->list, &newowner->pi_state_list); spin_unlock_irq(&newowner->pi_lock); + return 0; /* - * We own it, so we have to replace the pending owner - * TID. This must be atomic as we have preserve the - * owner died bit here. + * To handle the page fault we need to drop the hash bucket + * lock here. That gives the other task (either the pending + * owner itself or the task which stole the rtmutex) the + * chance to try the fixup of the pi_state. So once we are + * back from handling the fault we need to check the pi_state + * after reacquiring the hash bucket lock and before trying to + * do another fixup. When the fixup has been done already we + * simply return. */ - ret = get_futex_value_locked(&uval, uaddr); +handle_fault: + spin_unlock(q->lock_ptr); - while (!ret) { - newval = (uval & FUTEX_OWNER_DIED) | newtid; + ret = futex_handle_fault((unsigned long)uaddr, fshared, attempt++); - curval = cmpxchg_futex_value_locked(uaddr, uval, newval); + spin_lock(q->lock_ptr); - if (curval == -EFAULT) - ret = -EFAULT; - if (curval == uval) - break; - uval = curval; - } - return ret; + /* + * Check if someone else fixed it for us: + */ + if (pi_state->owner != oldowner) + return 0; + + if (ret) + return ret; + + goto retry; } /* @@ -1507,7 +1559,7 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared, * that case: */ if (q.pi_state->owner != curr) - ret = fixup_pi_state_owner(uaddr, &q, curr); + ret = fixup_pi_state_owner(uaddr, &q, curr, fshared); } else { /* * Catch the rare case, where the lock was released @@ -1539,7 +1591,8 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared, int res; owner = rt_mutex_owner(&q.pi_state->pi_mutex); - res = fixup_pi_state_owner(uaddr, &q, owner); + res = fixup_pi_state_owner(uaddr, &q, owner, + fshared); /* propagate -EFAULT, if the fixup failed */ if (res) -- cgit v0.10.2 From fe6e9c1f25ac01f848bd084ee0ee62a5a0966ff3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 23 Jun 2008 08:30:55 -0400 Subject: [PATCH] fix cgroup-inflicted breakage in block_dev.c devcgroup_inode_permission() expects MAY_FOO, not FMODE_FOO; kindly keep your misdesign consistent if you positively have to inflict it on the kernel. Signed-off-by: Al Viro diff --git a/fs/block_dev.c b/fs/block_dev.c index 470c10c..10d8a0a 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -931,8 +931,16 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) struct gendisk *disk; int ret; int part; + int perm = 0; - ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode); + if (file->f_mode & FMODE_READ) + perm |= MAY_READ; + if (file->f_mode & FMODE_WRITE) + perm |= MAY_WRITE; + /* + * hooks: /n/, see "layering violations". + */ + ret = devcgroup_inode_permission(bdev->bd_inode, perm); if (ret != 0) return ret; -- cgit v0.10.2 From 12fd0d3088d27867be68655bcab2b074f2835f60 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:07 -0700 Subject: [patch for 2.6.26 2/4] vfs: utimensat(): be consistent with utime() for immutable and append-only files This patch fixes utimensat() to make its behavior consistent with that of utime()/utimes() when dealing with files marked immutable and append-only. The current utimensat() implementation also returns EPERM if 'times' is non-NULL and the tv_nsec fields are both UTIME_NOW. For consistency, the (times != NULL && times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW) case should be treated like the traditional utimes() case where 'times' is NULL. That is, the call should succeed for a file marked append-only and should give the error EACCES if the file is marked as immutable. The simple way to do this is to set 'times' to NULL if (times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW). This is also the natural approach, since POSIX.1 semantics consider the times == {{x, UTIME_NOW}, {y, UTIME_NOW}} to be exactly equivalent to the case for times == NULL. (Thanks to Miklos for pointing this out.) Patch 3 in this series relies on the simplification provided by this patch. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index af059d5..14d3edb 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -102,6 +102,10 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags if (error) goto dput_and_out; + if (times && times[0].tv_nsec == UTIME_NOW && + times[1].tv_nsec == UTIME_NOW) + times = NULL; + /* Don't worry, the checks are done in inode_change_ok() */ newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME; if (times) { -- cgit v0.10.2 From 94c70b9ba7e9c1036284e779e2fef5be89021533 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:05 -0700 Subject: [patch for 2.6.26 1/4] vfs: utimensat(): ignore tv_sec if tv_nsec == UTIME_OMIT or UTIME_NOW The POSIX.1 draft spec for utimensat() says that if a times[n].tv_nsec field is UTIME_OMIT or UTIME_NOW, then the value in the corresponding tv_sec field is ignored. See the last sentence of this para, from the spec: If the tv_nsec field of a timespec structure has the special value UTIME_NOW, the file's relevant timestamp shall be set to the greatest value supported by the file system that is not greater than the current time. If the tv_nsec field has the special value UTIME_OMIT, the file's relevant timestamp shall not be changed. In either case, the tv_sec field shall be ignored. However the current Linux implementation requires the tv_sec value to be zero (or the EINVAL error results). This requirement should be removed. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index 14d3edb..d466bc5 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -173,14 +173,6 @@ asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __ if (utimes) { if (copy_from_user(&tstimes, utimes, sizeof(tstimes))) return -EFAULT; - if ((tstimes[0].tv_nsec == UTIME_OMIT || - tstimes[0].tv_nsec == UTIME_NOW) && - tstimes[0].tv_sec != 0) - return -EINVAL; - if ((tstimes[1].tv_nsec == UTIME_OMIT || - tstimes[1].tv_nsec == UTIME_NOW) && - tstimes[1].tv_sec != 0) - return -EINVAL; /* Nothing to do, we must not even check the path. */ if (tstimes[0].tv_nsec == UTIME_OMIT && -- cgit v0.10.2 From 4cca92264e61a90b43fc4e076cd25b7f4e16dc61 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:08 -0700 Subject: [patch for 2.6.26 3/4] vfs: utimensat(): fix error checking for {UTIME_NOW,UTIME_OMIT} case The POSIX.1 draft spec for utimensat() says: Only a process with the effective user ID equal to the user ID of the file or with appropriate privileges may use futimens() or utimensat() with a non-null times argument that does not have both tv_nsec fields set to UTIME_NOW and does not have both tv_nsec fields set to UTIME_OMIT. If this condition is violated, then the error EPERM should result. However, the current implementation does not generate EPERM if one tv_nsec field is UTIME_NOW while the other is UTIME_OMIT. It should give this error for that case. This patch: a) Repairs that problem. b) Removes the now unneeded nsec_special() helper function. c) Adds some comments to explain the checks that are being performed. Thanks to Miklos, who provided comments on the previous iteration of this patch. As a result, this version is a little simpler and and its logic is better structured. Miklos suggested an alternative idea, migrating the is_owner_or_cap() checks into fs/attr.c:inode_change_ok() via the use of an ATTR_OWNER_CHECK flag. Maybe we could do that later, but for now I've gone with this version, which is IMO simpler, and can be more easily read as being correct. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index d466bc5..118d1c3 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -40,14 +40,9 @@ asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times) #endif -static bool nsec_special(long nsec) -{ - return nsec == UTIME_OMIT || nsec == UTIME_NOW; -} - static bool nsec_valid(long nsec) { - if (nsec_special(nsec)) + if (nsec == UTIME_OMIT || nsec == UTIME_NOW) return true; return nsec >= 0 && nsec <= 999999999; @@ -106,7 +101,7 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags times[1].tv_nsec == UTIME_NOW) times = NULL; - /* Don't worry, the checks are done in inode_change_ok() */ + /* In most cases, the checks are done in inode_change_ok() */ newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME; if (times) { error = -EPERM; @@ -128,15 +123,26 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags newattrs.ia_mtime.tv_nsec = times[1].tv_nsec; newattrs.ia_valid |= ATTR_MTIME_SET; } - } - /* - * If times is NULL or both times are either UTIME_OMIT or - * UTIME_NOW, then need to check permissions, because - * inode_change_ok() won't do it. - */ - if (!times || (nsec_special(times[0].tv_nsec) && - nsec_special(times[1].tv_nsec))) { + /* + * For the UTIME_OMIT/UTIME_NOW and UTIME_NOW/UTIME_OMIT + * cases, we need to make an extra check that is not done by + * inode_change_ok(). + */ + if (((times[0].tv_nsec == UTIME_NOW && + times[1].tv_nsec == UTIME_OMIT) + || + (times[0].tv_nsec == UTIME_OMIT && + times[1].tv_nsec == UTIME_NOW)) + && !is_owner_or_cap(inode)) + goto mnt_drop_write_and_out; + } else { + + /* + * If times is NULL (or both times are UTIME_NOW), + * then we need to check permissions, because + * inode_change_ok() won't do it. + */ error = -EACCES; if (IS_IMMUTABLE(inode)) goto mnt_drop_write_and_out; -- cgit v0.10.2 From c70f84417429f41519be0197a1092a53c2201f47 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:09 -0700 Subject: [patch for 2.6.26 4/4] vfs: utimensat(): fix write access check for futimens() The POSIX.1 draft spec for futimens()/utimensat() says: Only a process with the effective user ID equal to the user ID of the file, *or with write access to the file*, or with appropriate privileges may use futimens() or utimensat() with a null pointer as the times argument or with both tv_nsec fields set to the special value UTIME_NOW. The important piece here is "with write access to the file", and this matters for futimens(), which deals with an argument that is a file descriptor referring to the file whose timestamps are being updated, The standard is saying that the "writability" check is based on the file permissions, not the access mode with which the file is opened. (This behavior is consistent with the semantics of FreeBSD's futimes().) However, Linux is currently doing the latter -- futimens(fd, times) is a library function implemented as utimensat(fd, NULL, times, 0) and within the utimensat() implementation we have the code: f = fget(dfd); // dfd is 'fd' ... if (f) { if (!(f->f_mode & FMODE_WRITE)) goto mnt_drop_write_and_out; The check should instead be based on the file permissions. Thanks to Miklos for pointing out how to do this check. Miklos also pointed out a simplification that could be made to my first version of this patch, since the checks for the pathname and file descriptor cases can now be conflated. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index 118d1c3..b6b664e 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -148,14 +148,9 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags goto mnt_drop_write_and_out; if (!is_owner_or_cap(inode)) { - if (f) { - if (!(f->f_mode & FMODE_WRITE)) - goto mnt_drop_write_and_out; - } else { - error = vfs_permission(&nd, MAY_WRITE); - if (error) - goto mnt_drop_write_and_out; - } + error = permission(inode, MAY_WRITE, NULL); + if (error) + goto mnt_drop_write_and_out; } } mutex_lock(&inode->i_mutex); -- cgit v0.10.2 From c8e7f449b225ee6c87454ac069f0a041035c5140 Mon Sep 17 00:00:00 2001 From: Jan Blunck Date: Mon, 9 Jun 2008 16:40:35 -0700 Subject: [patch 1/4] vfs: path_{get,put}() cleanups Here are some more places where path_{get,put}() can be used instead of dput()/mntput() pair. Signed-off-by: Jan Blunck Cc: Al Viro Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index c7e4353..ee15446 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -581,15 +581,13 @@ static __always_inline int link_path_walk(const char *name, struct nameidata *nd int result; /* make sure the stuff we saved doesn't go away */ - dget(save.dentry); - mntget(save.mnt); + path_get(&save); result = __link_path_walk(name, nd); if (result == -ESTALE) { /* nd->path had been dropped */ nd->path = save; - dget(nd->path.dentry); - mntget(nd->path.mnt); + path_get(&nd->path); nd->flags |= LOOKUP_REVAL; result = __link_path_walk(name, nd); } @@ -1216,8 +1214,9 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt, nd->flags = flags; nd->depth = 0; - nd->path.mnt = mntget(mnt); - nd->path.dentry = dget(dentry); + nd->path.dentry = dentry; + nd->path.mnt = mnt; + path_get(&nd->path); retval = path_walk(name, nd); if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry && diff --git a/fs/pipe.c b/fs/pipe.c index ec228bc..700f4e0 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -1003,8 +1003,7 @@ struct file *create_write_pipe(void) void free_write_pipe(struct file *f) { free_pipe_info(f->f_dentry->d_inode); - dput(f->f_path.dentry); - mntput(f->f_path.mnt); + path_put(&f->f_path); put_filp(f); } @@ -1015,8 +1014,8 @@ struct file *create_read_pipe(struct file *wrf) return ERR_PTR(-ENFILE); /* Grab pipe from the writer */ - f->f_path.mnt = mntget(wrf->f_path.mnt); - f->f_path.dentry = dget(wrf->f_path.dentry); + f->f_path = wrf->f_path; + path_get(&wrf->f_path); f->f_mapping = wrf->f_path.dentry->d_inode->i_mapping; f->f_pos = 0; @@ -1068,8 +1067,7 @@ int do_pipe(int *fd) err_fdr: put_unused_fd(fdr); err_read_pipe: - dput(fr->f_dentry); - mntput(fr->f_vfsmnt); + path_put(&fr->f_path); put_filp(fr); err_write_pipe: free_write_pipe(fw); -- cgit v0.10.2 From 20d4fdc1a788e4ca0aaf2422772ba668e7e10839 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 9 Jun 2008 16:40:36 -0700 Subject: [patch 2/4] fs: make struct file arg to d_path const Signed-off-by: Jan Engelhardt Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index 3ee588d5..c4c9072 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1847,7 +1847,7 @@ Elong: * * "buflen" should be positive. Caller holds the dcache_lock. */ -char *d_path(struct path *path, char *buf, int buflen) +char *d_path(const struct path *path, char *buf, int buflen) { char *res; struct path root; diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 2a66394..d982eb8 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -300,7 +300,7 @@ extern int d_validate(struct dentry *, struct dentry *); extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); extern char *__d_path(const struct path *path, struct path *root, char *, int); -extern char *d_path(struct path *, char *, int); +extern char *d_path(const struct path *, char *, int); extern char *dentry_path(struct dentry *, char *, int); /* Allocation counts.. */ -- cgit v0.10.2 From 694a1764d657e0f7a9b139bc7269c8d5f5a2534b Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 9 Jun 2008 16:40:37 -0700 Subject: [patch 3/4] vfs: fix ERR_PTR abuse in generic_readlink generic_readlink calls ERR_PTR for negative and positive values (vfs_readlink returns length of "link"), but it should not (not an errno) and does not need to. Signed-off-by: Marcin Slusarz Cc: Al Viro Cc: Christoph Hellwig Acked-by: Miklos Szeredi Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index ee15446..01e67dd 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2856,16 +2856,17 @@ int generic_readlink(struct dentry *dentry, char __user *buffer, int buflen) { struct nameidata nd; void *cookie; + int res; nd.depth = 0; cookie = dentry->d_inode->i_op->follow_link(dentry, &nd); - if (!IS_ERR(cookie)) { - int res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd)); - if (dentry->d_inode->i_op->put_link) - dentry->d_inode->i_op->put_link(dentry, &nd, cookie); - cookie = ERR_PTR(res); - } - return PTR_ERR(cookie); + if (IS_ERR(cookie)) + return PTR_ERR(cookie); + + res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd)); + if (dentry->d_inode->i_op->put_link) + dentry->d_inode->i_op->put_link(dentry, &nd, cookie); + return res; } int vfs_follow_link(struct nameidata *nd, const char *link) -- cgit v0.10.2 From f9f48ec72bfc9489a30bc6ddbfcf27d86a8bc651 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Mon, 9 Jun 2008 16:40:38 -0700 Subject: [patch 4/4] flock: remove unused fields from file_lock_operations fl_insert and fl_remove are not used right now in the kernel. Remove them. Signed-off-by: Denis V. Lunev Cc: Matthew Wilcox Cc: Alexander Viro Cc: "J. Bruce Fields" Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/locks.c b/fs/locks.c index 11dbf08..dce8c74 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -561,9 +561,6 @@ static void locks_insert_lock(struct file_lock **pos, struct file_lock *fl) /* insert into file's list */ fl->fl_next = *pos; *pos = fl; - - if (fl->fl_ops && fl->fl_ops->fl_insert) - fl->fl_ops->fl_insert(fl); } /* @@ -586,9 +583,6 @@ static void locks_delete_lock(struct file_lock **thisfl_p) fl->fl_fasync = NULL; } - if (fl->fl_ops && fl->fl_ops->fl_remove) - fl->fl_ops->fl_remove(fl); - if (fl->fl_nspid) { put_pid(fl->fl_nspid); fl->fl_nspid = NULL; diff --git a/include/linux/fs.h b/include/linux/fs.h index d490779..7c10808 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -894,8 +894,6 @@ static inline int file_check_writeable(struct file *filp) typedef struct files_struct *fl_owner_t; struct file_lock_operations { - void (*fl_insert)(struct file_lock *); /* lock insertion callback */ - void (*fl_remove)(struct file_lock *); /* lock removal callback */ void (*fl_copy_lock)(struct file_lock *, struct file_lock *); void (*fl_release_private)(struct file_lock *); }; -- cgit v0.10.2 From 87afd448b186c885d67a08b7417cd46253b6a9d6 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 23 Jun 2008 09:29:58 -0700 Subject: IB/mthca: Clear ICM pages before handing to FW Current memfree FW has a bug which in some cases, assumes that ICM pages passed to it are cleared. This patch uses __GFP_ZERO to allocate all ICM pages passed to the FW. Once firmware with a fix is released, we can make the workaround conditional on firmware version. This fixes the bug reported by Arthur Kepner here: http://lists.openfabrics.org/pipermail/general/2008-May/050026.html Cc: Signed-off-by: Eli Cohen [ Rewritten to be a one-liner using __GFP_ZERO instead of vmap()ing ICM memory and memset()ing it to 0. - Roland ] Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index b224079..d5862e5 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -109,7 +109,11 @@ static int mthca_alloc_icm_pages(struct scatterlist *mem, int order, gfp_t gfp_m { struct page *page; - page = alloc_pages(gfp_mask, order); + /* + * Use __GFP_ZERO because buggy firmware assumes ICM pages are + * cleared, and subtle failures are seen if they aren't. + */ + page = alloc_pages(gfp_mask | __GFP_ZERO, order); if (!page) return -ENOMEM; -- cgit v0.10.2 From be285c712bbbe5db43e503782fbef2bfeaa345f9 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Mon, 16 Jun 2008 13:28:07 +0200 Subject: [patch 3/3] vfs: make d_path() consistent across mount operations The path that __d_path() computes can become slightly inconsistent when it races with mount operations: it grabs the vfsmount_lock when traversing mount points but immediately drops it again, only to re-grab it when it reaches the next mount point. The result is that the filename computed is not always consisent, and the file may never have had that name. (This is unlikely, but still possible.) Fix this by grabbing the vfsmount_lock for the whole duration of __d_path(). Signed-off-by: Andreas Gruenbacher Signed-off-by: John Johansen Signed-off-by: Miklos Szeredi Acked-by: Christoph Hellwig Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index c4c9072..2b479de 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1782,6 +1782,7 @@ char *__d_path(const struct path *path, struct path *root, char * end = buffer+buflen; char * retval; + spin_lock(&vfsmount_lock); prepend(&end, &buflen, "\0", 1); if (!IS_ROOT(dentry) && d_unhashed(dentry) && (prepend(&end, &buflen, " (deleted)", 10) != 0)) @@ -1800,14 +1801,11 @@ char *__d_path(const struct path *path, struct path *root, break; if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) { /* Global root? */ - spin_lock(&vfsmount_lock); if (vfsmnt->mnt_parent == vfsmnt) { - spin_unlock(&vfsmount_lock); goto global_root; } dentry = vfsmnt->mnt_mountpoint; vfsmnt = vfsmnt->mnt_parent; - spin_unlock(&vfsmount_lock); continue; } parent = dentry->d_parent; @@ -1820,6 +1818,8 @@ char *__d_path(const struct path *path, struct path *root, dentry = parent; } +out: + spin_unlock(&vfsmount_lock); return retval; global_root: @@ -1829,9 +1829,11 @@ global_root: goto Elong; root->mnt = vfsmnt; root->dentry = dentry; - return retval; + goto out; + Elong: - return ERR_PTR(-ENAMETOOLONG); + retval = ERR_PTR(-ENAMETOOLONG); + goto out; } /** -- cgit v0.10.2 From 31f3e0b3a18c6d48196c40a82a3b8c01f4ff6b23 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 23 Jun 2008 18:11:52 +0200 Subject: [patch 1/3] vfs: dcache sparse fixes Fix the following sparse warnings: fs/dcache.c:2183:19: warning: symbol 'filp_cachep' was not declared. Should it be static? fs/dcache.c:115:3: warning: context imbalance in 'dentry_iput' - unexpected unlock fs/dcache.c:188:2: warning: context imbalance in 'dput' - different lock contexts for basic block fs/dcache.c:400:2: warning: context imbalance in 'prune_one_dentry' - different lock contexts for basic block fs/dcache.c:431:22: warning: context imbalance in 'prune_dcache' - different lock contexts for basic block fs/dcache.c:563:2: warning: context imbalance in 'shrink_dcache_sb' - different lock contexts for basic block fs/dcache.c:1385:6: warning: context imbalance in 'd_delete' - wrong count at exit fs/dcache.c:1636:2: warning: context imbalance in '__d_unalias' - unexpected unlock fs/dcache.c:1735:2: warning: context imbalance in 'd_materialise_unique' - different lock contexts for basic block Signed-off-by: Miklos Szeredi Reviewed-by: Matthew Wilcox Acked-by: Christoph Hellwig Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index 2b479de..e4b2b94 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -106,9 +107,10 @@ static void dentry_lru_remove(struct dentry *dentry) /* * Release the dentry's inode, using the filesystem * d_iput() operation if defined. - * Called with dcache_lock and per dentry lock held, drops both. */ static void dentry_iput(struct dentry * dentry) + __releases(dentry->d_lock) + __releases(dcache_lock) { struct inode *inode = dentry->d_inode; if (inode) { @@ -132,12 +134,13 @@ static void dentry_iput(struct dentry * dentry) * d_kill - kill dentry and return parent * @dentry: dentry to kill * - * Called with dcache_lock and d_lock, releases both. The dentry must - * already be unhashed and removed from the LRU. + * The dentry must already be unhashed and removed from the LRU. * * If this is the root of the dentry tree, return NULL. */ static struct dentry *d_kill(struct dentry *dentry) + __releases(dentry->d_lock) + __releases(dcache_lock) { struct dentry *parent; @@ -383,11 +386,11 @@ restart: * Try to prune ancestors as well. This is necessary to prevent * quadratic behavior of shrink_dcache_parent(), but is also expected * to be beneficial in reducing dentry cache fragmentation. - * - * Called with dcache_lock, drops it and then regains. - * Called with dentry->d_lock held, drops it. */ static void prune_one_dentry(struct dentry * dentry) + __releases(dentry->d_lock) + __releases(dcache_lock) + __acquires(dcache_lock) { __d_drop(dentry); dentry = d_kill(dentry); @@ -1604,10 +1607,9 @@ static int d_isparent(struct dentry *p1, struct dentry *p2) * * Note: If ever the locking in lock_rename() changes, then please * remember to update this too... - * - * On return, dcache_lock will have been unlocked. */ static struct dentry *__d_unalias(struct dentry *dentry, struct dentry *alias) + __releases(dcache_lock) { struct mutex *m1 = NULL, *m2 = NULL; struct dentry *ret; @@ -1743,7 +1745,6 @@ out_nolock: shouldnt_be_hashed: spin_unlock(&dcache_lock); BUG(); - goto shouldnt_be_hashed; } static int prepend(char **buffer, int *buflen, const char *str, @@ -1758,7 +1759,7 @@ static int prepend(char **buffer, int *buflen, const char *str, } /** - * d_path - return the path of a dentry + * __d_path - return the path of a dentry * @path: the dentry/vfsmount to report * @root: root vfsmnt/dentry (may be modified by this function) * @buffer: buffer to return value in @@ -1847,7 +1848,7 @@ Elong: * * Returns the buffer or an error code if the path was too long. * - * "buflen" should be positive. Caller holds the dcache_lock. + * "buflen" should be positive. */ char *d_path(const struct path *path, char *buf, int buflen) { -- cgit v0.10.2 From cdd16d0265c9234228fd37fbbad844d7e894b278 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 23 Jun 2008 18:11:53 +0200 Subject: [patch 2/3] vfs: dcache cleanups Comment from Al Viro: add prepend_name() wrapper. Signed-off-by: Miklos Szeredi Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index e4b2b94..6068c25 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1747,8 +1747,7 @@ shouldnt_be_hashed: BUG(); } -static int prepend(char **buffer, int *buflen, const char *str, - int namelen) +static int prepend(char **buffer, int *buflen, const char *str, int namelen) { *buflen -= namelen; if (*buflen < 0) @@ -1758,6 +1757,11 @@ static int prepend(char **buffer, int *buflen, const char *str, return 0; } +static int prepend_name(char **buffer, int *buflen, struct qstr *name) +{ + return prepend(buffer, buflen, name->name, name->len); +} + /** * __d_path - return the path of a dentry * @path: the dentry/vfsmount to report @@ -1780,8 +1784,8 @@ char *__d_path(const struct path *path, struct path *root, { struct dentry *dentry = path->dentry; struct vfsmount *vfsmnt = path->mnt; - char * end = buffer+buflen; - char * retval; + char *end = buffer + buflen; + char *retval; spin_lock(&vfsmount_lock); prepend(&end, &buflen, "\0", 1); @@ -1811,8 +1815,7 @@ char *__d_path(const struct path *path, struct path *root, } parent = dentry->d_parent; prefetch(parent); - if ((prepend(&end, &buflen, dentry->d_name.name, - dentry->d_name.len) != 0) || + if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) || (prepend(&end, &buflen, "/", 1) != 0)) goto Elong; retval = end; @@ -1825,8 +1828,7 @@ out: global_root: retval += 1; /* hit the slash */ - if (prepend(&retval, &buflen, dentry->d_name.name, - dentry->d_name.len) != 0) + if (prepend_name(&retval, &buflen, &dentry->d_name) != 0) goto Elong; root->mnt = vfsmnt; root->dentry = dentry; @@ -1918,16 +1920,11 @@ char *dentry_path(struct dentry *dentry, char *buf, int buflen) retval = end-1; *retval = '/'; - for (;;) { - struct dentry *parent; - if (IS_ROOT(dentry)) - break; + while (!IS_ROOT(dentry)) { + struct dentry *parent = dentry->d_parent; - parent = dentry->d_parent; prefetch(parent); - - if ((prepend(&end, &buflen, dentry->d_name.name, - dentry->d_name.len) != 0) || + if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) || (prepend(&end, &buflen, "/", 1) != 0)) goto Elong; @@ -1978,7 +1975,7 @@ asmlinkage long sys_getcwd(char __user *buf, unsigned long size) error = -ENOENT; /* Has the current directory has been unlinked? */ spin_lock(&dcache_lock); - if (pwd.dentry->d_parent == pwd.dentry || !d_unhashed(pwd.dentry)) { + if (IS_ROOT(pwd.dentry) || !d_unhashed(pwd.dentry)) { unsigned long len; struct path tmp = root; char * cwd; -- cgit v0.10.2 From 36c7343b4ecac2432430f5393314f1bdc2c219a5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 23 Jun 2008 12:06:52 +0100 Subject: tty_driver: Update required method documentation Some of the requirement rules are now more relaxed. Also correct a contradiction in the previous update Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 59f1c0b..d2a0035 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -27,8 +27,7 @@ * This routine is called by the kernel to write a series of * characters to the tty device. The characters may come from * user space or kernel space. This routine will return the - * number of characters actually accepted for writing. This - * routine is mandatory. + * number of characters actually accepted for writing. * * Optional: Required for writable devices. * @@ -134,7 +133,7 @@ * This routine notifies the tty driver that it should hangup the * tty device. * - * Required: + * Optional: * * void (*break_ctl)(struct tty_stuct *tty, int state); * -- cgit v0.10.2 From 96a331b1d6426726c37242ddbe939ee14b255790 Mon Sep 17 00:00:00 2001 From: Gustavo Fernando Padovan Date: Mon, 23 Jun 2008 12:07:06 +0100 Subject: removed unused var real_tty on n_tty_ioctl() I noted that the 'struct tty_struct *real_tty' is not used in this function, so I removed the code about 'real_tty'. Signed-off-by: Gustavo Fernando Padovan Acked-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index b1a757a..8f81139 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -981,16 +981,9 @@ EXPORT_SYMBOL_GPL(tty_perform_flush); int n_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct tty_struct *real_tty; unsigned long flags; int retval; - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && - tty->driver->subtype == PTY_TYPE_MASTER) - real_tty = tty->link; - else - real_tty = tty; - switch (cmd) { case TCXONC: retval = tty_check_change(tty); -- cgit v0.10.2 From 672ca28e300c17bf8d792a2a7a8631193e580c74 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 23 Jun 2008 11:21:37 -0700 Subject: Fix ZERO_PAGE breakage with vmware Commit 89f5b7da2a6bad2e84670422ab8192382a5aeb9f ("Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP") broke vmware, as reported by Jeff Chua: "This broke vmware 6.0.4. Jun 22 14:53:03.845: vmx| NOT_IMPLEMENTED /build/mts/release/bora-93057/bora/vmx/main/vmmonPosix.c:774" and the reason seems to be that there's an old bug in how we handle do FOLL_ANON on VM_SHARED areas in get_user_pages(), but since it only triggered if the whole page table was missing, nobody had apparently hit it before. The recent changes to 'follow_page()' made the FOLL_ANON logic trigger not just for whole missing page tables, but for individual pages as well, and exposed this problem. This fixes it by making the test for when FOLL_ANON is used more careful, and also makes the code easier to read and understand by moving the logic to a separate inline function. Reported-and-tested-by: Jeff Chua Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index 9aefaae..423e0e7 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1045,6 +1045,26 @@ no_page_table: return page; } +/* Can we do the FOLL_ANON optimization? */ +static inline int use_zero_page(struct vm_area_struct *vma) +{ + /* + * We don't want to optimize FOLL_ANON for make_pages_present() + * when it tries to page in a VM_LOCKED region. As to VM_SHARED, + * we want to get the page from the page tables to make sure + * that we serialize and update with any other user of that + * mapping. + */ + if (vma->vm_flags & (VM_LOCKED | VM_SHARED)) + return 0; + /* + * And if we have a fault or a nopfn routine, it's not an + * anonymous region. + */ + return !vma->vm_ops || + (!vma->vm_ops->fault && !vma->vm_ops->nopfn); +} + int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start, int len, int write, int force, struct page **pages, struct vm_area_struct **vmas) @@ -1119,8 +1139,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, foll_flags = FOLL_TOUCH; if (pages) foll_flags |= FOLL_GET; - if (!write && !(vma->vm_flags & VM_LOCKED) && - (!vma->vm_ops || !vma->vm_ops->fault)) + if (!write && use_zero_page(vma)) foll_flags |= FOLL_ANON; do { -- cgit v0.10.2 From 945754a1754f9d4c2974a8241ad4f92fad7f3a6a Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 23 Jun 2008 14:30:30 +0200 Subject: mm: fix race in COW logic There is a race in the COW logic. It contains a shortcut to avoid the COW and reuse the page if we have the sole reference on the page, however it is possible to have two racing do_wp_page()ers with one causing the other to mistakenly believe it is safe to take the shortcut when it is not. This could lead to data corruption. Process 1 and process2 each have a wp pte of the same anon page (ie. one forked the other). The page's mapcount is 2. Then they both attempt to write to it around the same time... proc1 proc2 thr1 proc2 thr2 CPU0 CPU1 CPU3 do_wp_page() do_wp_page() trylock_page() can_share_swap_page() load page mapcount (==2) reuse = 0 pte unlock copy page to new_page pte lock page_remove_rmap(page); trylock_page() can_share_swap_page() load page mapcount (==1) reuse = 1 ptep_set_access_flags (allow W) write private key into page read from page ptep_clear_flush() set_pte_at(pte of new_page) Fix this by moving the page_remove_rmap of the old page after the pte clear and flush. Potentially the entire branch could be moved down here, but in order to stay consistent, I won't (should probably move all the *_mm_counter stuff with one patch). Signed-off-by: Nick Piggin Acked-by: Hugh Dickins Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index 423e0e7..d14b251 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1785,7 +1785,6 @@ gotten: page_table = pte_offset_map_lock(mm, pmd, address, &ptl); if (likely(pte_same(*page_table, orig_pte))) { if (old_page) { - page_remove_rmap(old_page, vma); if (!PageAnon(old_page)) { dec_mm_counter(mm, file_rss); inc_mm_counter(mm, anon_rss); @@ -1807,6 +1806,32 @@ gotten: lru_cache_add_active(new_page); page_add_new_anon_rmap(new_page, vma, address); + if (old_page) { + /* + * Only after switching the pte to the new page may + * we remove the mapcount here. Otherwise another + * process may come and find the rmap count decremented + * before the pte is switched to the new page, and + * "reuse" the old page writing into it while our pte + * here still points into it and can be read by other + * threads. + * + * The critical issue is to order this + * page_remove_rmap with the ptp_clear_flush above. + * Those stores are ordered by (if nothing else,) + * the barrier present in the atomic_add_negative + * in page_remove_rmap. + * + * Then the TLB flush in ptep_clear_flush ensures that + * no process can access the old page before the + * decremented mapcount is visible. And the old page + * cannot be reused until after the decremented + * mapcount is visible. So transitively, TLBs to + * old page will be flushed before it can be reused. + */ + page_remove_rmap(old_page, vma); + } + /* Free the old page.. */ new_page = old_page; ret |= VM_FAULT_WRITE; -- cgit v0.10.2 From 33852a1f2bb014e4047a844556c0d76a2f790c37 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 19 Jun 2008 14:20:11 -0400 Subject: NFS: Reduce the NFS mount code stack usage. This appears to fix the Oops reported in http://bugzilla.kernel.org/show_bug.cgi?id=10826 Signed-off-by: Trond Myklebust diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 2a4a024..dac663d 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1216,8 +1216,6 @@ static int nfs_validate_mount_data(void *options, { struct nfs_mount_data *data = (struct nfs_mount_data *)options; - memset(args, 0, sizeof(*args)); - if (data == NULL) goto out_no_data; @@ -1585,24 +1583,29 @@ static int nfs_get_sb(struct file_system_type *fs_type, { struct nfs_server *server = NULL; struct super_block *s; - struct nfs_fh mntfh; - struct nfs_parsed_mount_data data; + struct nfs_parsed_mount_data *data; + struct nfs_fh *mntfh; struct dentry *mntroot; int (*compare_super)(struct super_block *, void *) = nfs_compare_super; struct nfs_sb_mountdata sb_mntdata = { .mntflags = flags, }; - int error; + int error = -ENOMEM; - security_init_mnt_opts(&data.lsm_opts); + data = kzalloc(sizeof(*data), GFP_KERNEL); + mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL); + if (data == NULL || mntfh == NULL) + goto out_free_fh; + + security_init_mnt_opts(&data->lsm_opts); /* Validate the mount data */ - error = nfs_validate_mount_data(raw_data, &data, &mntfh, dev_name); + error = nfs_validate_mount_data(raw_data, data, mntfh, dev_name); if (error < 0) goto out; /* Get a volume representation */ - server = nfs_create_server(&data, &mntfh); + server = nfs_create_server(data, mntfh); if (IS_ERR(server)) { error = PTR_ERR(server); goto out; @@ -1630,16 +1633,16 @@ static int nfs_get_sb(struct file_system_type *fs_type, if (!s->s_root) { /* initial superblock/root creation */ - nfs_fill_super(s, &data); + nfs_fill_super(s, data); } - mntroot = nfs_get_root(s, &mntfh); + mntroot = nfs_get_root(s, mntfh); if (IS_ERR(mntroot)) { error = PTR_ERR(mntroot); goto error_splat_super; } - error = security_sb_set_mnt_opts(s, &data.lsm_opts); + error = security_sb_set_mnt_opts(s, &data->lsm_opts); if (error) goto error_splat_root; @@ -1649,9 +1652,12 @@ static int nfs_get_sb(struct file_system_type *fs_type, error = 0; out: - kfree(data.nfs_server.hostname); - kfree(data.mount_server.hostname); - security_free_mnt_opts(&data.lsm_opts); + kfree(data->nfs_server.hostname); + kfree(data->mount_server.hostname); + security_free_mnt_opts(&data->lsm_opts); +out_free_fh: + kfree(mntfh); + kfree(data); return error; out_err_nosb: @@ -1800,8 +1806,6 @@ static int nfs4_validate_mount_data(void *options, struct nfs4_mount_data *data = (struct nfs4_mount_data *)options; char *c; - memset(args, 0, sizeof(*args)); - if (data == NULL) goto out_no_data; @@ -1959,26 +1963,31 @@ out_no_client_address: static int nfs4_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt) { - struct nfs_parsed_mount_data data; + struct nfs_parsed_mount_data *data; struct super_block *s; struct nfs_server *server; - struct nfs_fh mntfh; + struct nfs_fh *mntfh; struct dentry *mntroot; int (*compare_super)(struct super_block *, void *) = nfs_compare_super; struct nfs_sb_mountdata sb_mntdata = { .mntflags = flags, }; - int error; + int error = -ENOMEM; - security_init_mnt_opts(&data.lsm_opts); + data = kzalloc(sizeof(*data), GFP_KERNEL); + mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL); + if (data == NULL || mntfh == NULL) + goto out_free_fh; + + security_init_mnt_opts(&data->lsm_opts); /* Validate the mount data */ - error = nfs4_validate_mount_data(raw_data, &data, dev_name); + error = nfs4_validate_mount_data(raw_data, data, dev_name); if (error < 0) goto out; /* Get a volume representation */ - server = nfs4_create_server(&data, &mntfh); + server = nfs4_create_server(data, mntfh); if (IS_ERR(server)) { error = PTR_ERR(server); goto out; @@ -2009,13 +2018,13 @@ static int nfs4_get_sb(struct file_system_type *fs_type, nfs4_fill_super(s); } - mntroot = nfs4_get_root(s, &mntfh); + mntroot = nfs4_get_root(s, mntfh); if (IS_ERR(mntroot)) { error = PTR_ERR(mntroot); goto error_splat_super; } - error = security_sb_set_mnt_opts(s, &data.lsm_opts); + error = security_sb_set_mnt_opts(s, &data->lsm_opts); if (error) goto error_splat_root; @@ -2025,10 +2034,13 @@ static int nfs4_get_sb(struct file_system_type *fs_type, error = 0; out: - kfree(data.client_address); - kfree(data.nfs_server.export_path); - kfree(data.nfs_server.hostname); - security_free_mnt_opts(&data.lsm_opts); + kfree(data->client_address); + kfree(data->nfs_server.export_path); + kfree(data->nfs_server.hostname); + security_free_mnt_opts(&data->lsm_opts); +out_free_fh: + kfree(mntfh); + kfree(data); return error; out_free: -- cgit v0.10.2 From b7e2445737ff69cef892b6fd9cd71cae2c9e9515 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 19 Jun 2008 15:21:11 -0400 Subject: NFS: Fix filehandle size comparisons in the mount code Fix a sign issue in xdr_decode_fhstatus3() Fix incorrect comparison in nfs_validate_mount_data() Signed-off-by: Trond Myklebust diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c index 49c7cd0..779d2eb 100644 --- a/fs/nfs/mount_clnt.c +++ b/fs/nfs/mount_clnt.c @@ -130,10 +130,11 @@ static int xdr_decode_fhstatus3(struct rpc_rqst *req, __be32 *p, struct mnt_fhstatus *res) { struct nfs_fh *fh = res->fh; + unsigned size; if ((res->status = ntohl(*p++)) == 0) { - int size = ntohl(*p++); - if (size <= NFS3_FHSIZE) { + size = ntohl(*p++); + if (size <= NFS3_FHSIZE && size != 0) { fh->size = size; memcpy(fh->data, p, size); } else diff --git a/fs/nfs/super.c b/fs/nfs/super.c index dac663d..614efee 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1249,13 +1249,13 @@ static int nfs_validate_mount_data(void *options, case 5: memset(data->context, 0, sizeof(data->context)); case 6: - if (data->flags & NFS_MOUNT_VER3) + if (data->flags & NFS_MOUNT_VER3) { + if (data->root.size > NFS3_FHSIZE || data->root.size == 0) + goto out_invalid_fh; mntfh->size = data->root.size; - else + } else mntfh->size = NFS2_FHSIZE; - if (mntfh->size > sizeof(mntfh->data)) - goto out_invalid_fh; memcpy(mntfh->data, data->root.data, mntfh->size); if (mntfh->size < sizeof(mntfh->data)) -- cgit v0.10.2 From 03fa9e84e5dc10aeacb0e4eb2f708cd9fc36a5b8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 5 Jun 2008 16:02:35 -0400 Subject: NFS: nfs_updatepage(): don't mark page as dirty if an error occurred Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 6d8ace3..f333848 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -739,12 +739,13 @@ int nfs_updatepage(struct file *file, struct page *page, } status = nfs_writepage_setup(ctx, page, offset, count); - __set_page_dirty_nobuffers(page); + if (status < 0) + nfs_set_pageerror(page); + else + __set_page_dirty_nobuffers(page); dprintk("NFS: nfs_updatepage returns %d (isize %Ld)\n", status, (long long)i_size_read(inode)); - if (status < 0) - nfs_set_pageerror(page); return status; } -- cgit v0.10.2 From 72c6e251ed84b3a9cdfde6711191155c47bb2b9c Mon Sep 17 00:00:00 2001 From: Thorsten Kranzkowski Date: Mon, 23 Jun 2008 20:57:22 +0000 Subject: alpha: fix compile error in arch/alpha/mm/init.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 9267b4b3880d00dc2dab90f1d817c856939114f7 ("alpha: fix module load failures on smp (bug #10926)") causes a regression for my ev4 uniprocessor build: CC arch/alpha/mm/init.o /export/data/repositories/linux-2.6/arch/alpha/mm/init.c:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘typeof’ make[2]: *** [arch/alpha/mm/init.o] Error 1 make[1]: *** [arch/alpha/mm] Error 2 make: *** [sub-make] Error 2 This fixes it for me (compile and boot tested): Signed-off-by: Thorsten Kranzkowski Acked-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h index 82e8a94..3495e8e 100644 --- a/include/asm-alpha/percpu.h +++ b/include/asm-alpha/percpu.h @@ -69,6 +69,8 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #define __get_cpu_var(var) per_cpu_var(var) #define __raw_get_cpu_var(var) per_cpu_var(var) +#define PER_CPU_ATTRIBUTES + #endif /* SMP */ #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) -- cgit v0.10.2 From d4acf7e7abe45457e751525a2a4d5b693dfdd597 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 6 Jun 2008 16:37:35 -0300 Subject: KVM: Fix race between timer migration and vcpu migration A guest vcpu instance can be scheduled to a different physical CPU between the test for KVM_REQ_MIGRATE_TIMER and local_irq_disable(). If that happens, the timer will only be migrated to the current pCPU on the next exit, meaning that guest LAPIC timer event can be delayed until a host interrupt is triggered. Fix it by cancelling guest entry if any vcpu request is pending. This has the side effect of nicely consolidating vcpu->requests checks. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 00acf13..b90744a 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2759,6 +2759,8 @@ again: if (vcpu->requests) { if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests)) __kvm_migrate_timers(vcpu); + if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests)) + kvm_x86_ops->tlb_flush(vcpu); if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS, &vcpu->requests)) { kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS; @@ -2781,21 +2783,13 @@ again: local_irq_disable(); - if (need_resched()) { + if (vcpu->requests || need_resched()) { local_irq_enable(); preempt_enable(); r = 1; goto out; } - if (vcpu->requests) - if (test_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests)) { - local_irq_enable(); - preempt_enable(); - r = 1; - goto out; - } - if (signal_pending(current)) { local_irq_enable(); preempt_enable(); @@ -2825,9 +2819,6 @@ again: kvm_guest_enter(); - if (vcpu->requests) - if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests)) - kvm_x86_ops->tlb_flush(vcpu); KVMTRACE_0D(VMENTRY, vcpu, entryexit); kvm_x86_ops->run(vcpu, kvm_run); -- cgit v0.10.2 From 06e05645661211b9eaadaf6344c335d2e80f0ba2 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 6 Jun 2008 16:37:36 -0300 Subject: KVM: close timer injection race window in __vcpu_run If a timer fires after kvm_inject_pending_timer_irqs() but before local_irq_disable() the code will enter guest mode and only inject such timer interrupt the next time an unrelated event causes an exit. It would be simpler if the timer->pending irq conversion could be done with IRQ's disabled, so that the above problem cannot happen. For now introduce a new vcpu requests bit to cancel guest entry. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index f2f5d26..3829aa7 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -200,9 +200,12 @@ int __pit_timer_fn(struct kvm_kpit_state *ps) atomic_inc(&pt->pending); smp_mb__after_atomic_inc(); - if (vcpu0 && waitqueue_active(&vcpu0->wq)) { - vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE; - wake_up_interruptible(&vcpu0->wq); + if (vcpu0) { + set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests); + if (waitqueue_active(&vcpu0->wq)) { + vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE; + wake_up_interruptible(&vcpu0->wq); + } } pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period); diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index c297c50..ebc03f5 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -940,6 +940,7 @@ static int __apic_timer_fn(struct kvm_lapic *apic) wait_queue_head_t *q = &apic->vcpu->wq; atomic_inc(&apic->timer.pending); + set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests); if (waitqueue_active(q)) { apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE; wake_up_interruptible(q); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b90744a..b08812d 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2774,6 +2774,7 @@ again: } } + clear_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests); kvm_inject_pending_timer_irqs(vcpu); preempt_disable(); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 092b1b2..de9d1df 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -33,6 +33,7 @@ #define KVM_REQ_REPORT_TPR_ACCESS 2 #define KVM_REQ_MMU_RELOAD 3 #define KVM_REQ_TRIPLE_FAULT 4 +#define KVM_REQ_PENDING_TIMER 5 struct kvm_vcpu; extern struct kmem_cache *kvm_vcpu_cache; -- cgit v0.10.2 From 6597ca09e6c0e5aec7ffd2b8ab48c671d3c28414 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Sun, 8 Jun 2008 01:48:53 -0300 Subject: KVM: MMU: Fix rmap_write_protect() hugepage iteration bug rmap_next() does not work correctly after rmap_remove(), as it expects the rmap chains not to change during iteration. Fix (for now) by restarting iteration from the beginning. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index ee3f530..9628091 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -640,6 +640,7 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn) rmap_remove(kvm, spte); --kvm->stat.lpages; set_shadow_pte(spte, shadow_trap_nonpresent_pte); + spte = NULL; write_protected = 1; } spte = rmap_next(kvm, rmapp, spte); -- cgit v0.10.2 From 3094538739415a9225afd2a6c78cb0fe1c1f641b Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Wed, 11 Jun 2008 20:32:40 -0300 Subject: KVM: MMU: large page update_pte issue with non-PAE 32-bit guests (resend) kvm_mmu_pte_write() does not handle 32-bit non-PAE large page backed guests properly. It will instantiate two 2MB sptes pointing to the same physical 2MB page when a guest large pte update is trapped. Instead of duplicating code to handle this, disallow directory level updates to happen through kvm_mmu_pte_write(), so the two 2MB sptes emulating one guest 4MB pte can be correctly created by the page fault handling path. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 9628091..baa6503 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1581,11 +1581,13 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu, u64 *spte, const void *new) { - if ((sp->role.level != PT_PAGE_TABLE_LEVEL) - && !vcpu->arch.update_pte.largepage) { - ++vcpu->kvm->stat.mmu_pde_zapped; - return; - } + if (sp->role.level != PT_PAGE_TABLE_LEVEL) { + if (!vcpu->arch.update_pte.largepage || + sp->role.glevels == PT32_ROOT_LEVEL) { + ++vcpu->kvm->stat.mmu_pde_zapped; + return; + } + } ++vcpu->kvm->stat.mmu_pte_updated; if (sp->role.glevels == PT32_ROOT_LEVEL) -- cgit v0.10.2 From 6bf6a9532fd03ad719f0c86654f16ef777b78fc6 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Thu, 12 Jun 2008 16:54:41 +0300 Subject: KVM: MMU: Fix oops on guest userspace access to guest pagetable KVM has a heuristic to unshadow guest pagetables when userspace accesses them, on the assumption that most guests do not allow userspace to access pagetables directly. Unfortunately, in addition to unshadowing the pagetables, it also oopses. This never triggers on ordinary guests since sane OSes will clear the pagetables before assigning them to userspace, which will trigger the flood heuristic, unshadowing the pagetables before the first userspace access. One particular guest, though (Xenner) will run the kernel in userspace, triggering the oops. Since the heuristic is incorrect in this case, we can simply remove it. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index baa6503..7e7c396 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1083,10 +1083,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte, struct kvm_mmu_page *shadow; spte |= PT_WRITABLE_MASK; - if (user_fault) { - mmu_unshadow(vcpu->kvm, gfn); - goto unshadowed; - } shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn); if (shadow || @@ -1103,8 +1099,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte, } } -unshadowed: - if (pte_access & ACC_WRITE_MASK) mark_page_dirty(vcpu->kvm, gfn); -- cgit v0.10.2 From 4fa6b9c5dc4134bdeac341d731a87783cc11ca10 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 17 Jun 2008 15:36:36 -0700 Subject: KVM: ioapic: fix lost interrupt when changing a device's irq The ioapic acknowledge path translates interrupt vectors to irqs. It currently uses a first match algorithm, stopping when it finds the first redirection table entry containing the vector. That fails however if the guest changes the irq to a different line, leaving the old redirection table entry in place (though masked). Result is interrupts not making it to the guest. Fix by always scanning the entire redirection table. Signed-off-by: Avi Kivity diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c index 98778cb..1dcf9f3 100644 --- a/virt/kvm/ioapic.c +++ b/virt/kvm/ioapic.c @@ -269,28 +269,9 @@ void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) } } -static int get_eoi_gsi(struct kvm_ioapic *ioapic, int vector) +static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int gsi) { - int i; - - for (i = 0; i < IOAPIC_NUM_PINS; i++) - if (ioapic->redirtbl[i].fields.vector == vector) - return i; - return -1; -} - -void kvm_ioapic_update_eoi(struct kvm *kvm, int vector) -{ - struct kvm_ioapic *ioapic = kvm->arch.vioapic; union ioapic_redir_entry *ent; - int gsi; - - gsi = get_eoi_gsi(ioapic, vector); - if (gsi == -1) { - printk(KERN_WARNING "Can't find redir item for %d EOI\n", - vector); - return; - } ent = &ioapic->redirtbl[gsi]; ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG); @@ -300,6 +281,16 @@ void kvm_ioapic_update_eoi(struct kvm *kvm, int vector) ioapic_deliver(ioapic, gsi); } +void kvm_ioapic_update_eoi(struct kvm *kvm, int vector) +{ + struct kvm_ioapic *ioapic = kvm->arch.vioapic; + int i; + + for (i = 0; i < IOAPIC_NUM_PINS; i++) + if (ioapic->redirtbl[i].fields.vector == vector) + __kvm_ioapic_update_eoi(ioapic, i); +} + static int ioapic_in_range(struct kvm_io_device *this, gpa_t addr) { struct kvm_ioapic *ioapic = (struct kvm_ioapic *)this->private; -- cgit v0.10.2 From a9b21b622958afc3f3bc5a23d266dd9ed1171fd3 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 24 Jun 2008 11:48:49 +0300 Subject: KVM: VMX: Fix host msr corruption with preemption enabled Switching msrs can occur either synchronously as a result of calls to the msr management functions (usually in response to the guest touching virtualized msrs), or asynchronously when preempting a kvm thread that has guest state loaded. If we're unlucky enough to have the two at the same time, host msrs are corrupted and the machine goes kaput on the next syscall. Most easily triggered by Windows Server 2008, as it does a lot of msr switching during bootup. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 02efbe7..540e951 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -566,7 +566,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) load_transition_efer(vmx); } -static void vmx_load_host_state(struct vcpu_vmx *vmx) +static void __vmx_load_host_state(struct vcpu_vmx *vmx) { unsigned long flags; @@ -596,6 +596,13 @@ static void vmx_load_host_state(struct vcpu_vmx *vmx) reload_host_efer(vmx); } +static void vmx_load_host_state(struct vcpu_vmx *vmx) +{ + preempt_disable(); + __vmx_load_host_state(vmx); + preempt_enable(); +} + /* * Switches to specified vcpu, until a matching vcpu_put(), but assumes * vcpu mutex is already taken. @@ -654,7 +661,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) static void vmx_vcpu_put(struct kvm_vcpu *vcpu) { - vmx_load_host_state(to_vmx(vcpu)); + __vmx_load_host_state(to_vmx(vcpu)); } static void vmx_fpu_activate(struct kvm_vcpu *vcpu) @@ -884,11 +891,8 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) switch (msr_index) { #ifdef CONFIG_X86_64 case MSR_EFER: + vmx_load_host_state(vmx); ret = kvm_set_msr_common(vcpu, msr_index, data); - if (vmx->host_state.loaded) { - reload_host_efer(vmx); - load_transition_efer(vmx); - } break; case MSR_FS_BASE: vmcs_writel(GUEST_FS_BASE, data); @@ -910,11 +914,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) guest_write_tsc(data); break; default: + vmx_load_host_state(vmx); msr = find_msr_entry(vmx, msr_index); if (msr) { msr->data = data; - if (vmx->host_state.loaded) - load_msrs(vmx->guest_msrs, vmx->save_nmsrs); break; } ret = kvm_set_msr_common(vcpu, msr_index, data); -- cgit v0.10.2 From e8183c2452041326c95258ecc7865b6fcd91c730 Mon Sep 17 00:00:00 2001 From: Tomas Janousek Date: Mon, 23 Jun 2008 15:12:35 +0200 Subject: udf: Fix regression in UDF anchor block detection In some cases it could happen that some block passed test in udf_check_anchor_block() even though udf_read_tagged() refused to read it later (e.g. because checksum was not correct). This patch makes udf_check_anchor_block() use udf_read_tagged() so that the checking is stricter. This fixes the regression (certain disks unmountable) caused by commit 423cf6dc04eb79d441bfda2b127bc4b57134b41d. Signed-off-by: Tomas Janousek Signed-off-by: Jan Kara diff --git a/fs/udf/super.c b/fs/udf/super.c index 7a5f69b..44cc702 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -682,38 +682,26 @@ static int udf_vrs(struct super_block *sb, int silent) /* * Check whether there is an anchor block in the given block */ -static int udf_check_anchor_block(struct super_block *sb, sector_t block, - bool varconv) +static int udf_check_anchor_block(struct super_block *sb, sector_t block) { - struct buffer_head *bh = NULL; - tag *t; + struct buffer_head *bh; uint16_t ident; - uint32_t location; - if (varconv) { - if (udf_fixed_to_variable(block) >= - sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits) - return 0; - bh = sb_bread(sb, udf_fixed_to_variable(block)); - } - else - bh = sb_bread(sb, block); + if (UDF_QUERY_FLAG(sb, UDF_FLAG_VARCONV) && + udf_fixed_to_variable(block) >= + sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits) + return 0; + bh = udf_read_tagged(sb, block, block, &ident); if (!bh) return 0; - - t = (tag *)bh->b_data; - ident = le16_to_cpu(t->tagIdent); - location = le32_to_cpu(t->tagLocation); brelse(bh); - if (ident != TAG_IDENT_AVDP) - return 0; - return location == block; + + return ident == TAG_IDENT_AVDP; } /* Search for an anchor volume descriptor pointer */ -static sector_t udf_scan_anchors(struct super_block *sb, bool varconv, - sector_t lastblock) +static sector_t udf_scan_anchors(struct super_block *sb, sector_t lastblock) { sector_t last[6]; int i; @@ -739,7 +727,7 @@ static sector_t udf_scan_anchors(struct super_block *sb, bool varconv, sb->s_blocksize_bits) continue; - if (udf_check_anchor_block(sb, last[i], varconv)) { + if (udf_check_anchor_block(sb, last[i])) { sbi->s_anchor[0] = last[i]; sbi->s_anchor[1] = last[i] - 256; return last[i]; @@ -748,17 +736,17 @@ static sector_t udf_scan_anchors(struct super_block *sb, bool varconv, if (last[i] < 256) continue; - if (udf_check_anchor_block(sb, last[i] - 256, varconv)) { + if (udf_check_anchor_block(sb, last[i] - 256)) { sbi->s_anchor[1] = last[i] - 256; return last[i]; } } - if (udf_check_anchor_block(sb, sbi->s_session + 256, varconv)) { + if (udf_check_anchor_block(sb, sbi->s_session + 256)) { sbi->s_anchor[0] = sbi->s_session + 256; return last[0]; } - if (udf_check_anchor_block(sb, sbi->s_session + 512, varconv)) { + if (udf_check_anchor_block(sb, sbi->s_session + 512)) { sbi->s_anchor[0] = sbi->s_session + 512; return last[0]; } @@ -780,23 +768,24 @@ static void udf_find_anchor(struct super_block *sb) int i; struct udf_sb_info *sbi = UDF_SB(sb); - lastblock = udf_scan_anchors(sb, 0, sbi->s_last_block); + lastblock = udf_scan_anchors(sb, sbi->s_last_block); if (lastblock) goto check_anchor; /* No anchor found? Try VARCONV conversion of block numbers */ + UDF_SET_FLAG(sb, UDF_FLAG_VARCONV); /* Firstly, we try to not convert number of the last block */ - lastblock = udf_scan_anchors(sb, 1, + lastblock = udf_scan_anchors(sb, udf_variable_to_fixed(sbi->s_last_block)); - if (lastblock) { - UDF_SET_FLAG(sb, UDF_FLAG_VARCONV); + if (lastblock) goto check_anchor; - } /* Secondly, we try with converted number of the last block */ - lastblock = udf_scan_anchors(sb, 1, sbi->s_last_block); - if (lastblock) - UDF_SET_FLAG(sb, UDF_FLAG_VARCONV); + lastblock = udf_scan_anchors(sb, sbi->s_last_block); + if (!lastblock) { + /* VARCONV didn't help. Clear it. */ + UDF_CLEAR_FLAG(sb, UDF_FLAG_VARCONV); + } check_anchor: /* -- cgit v0.10.2 From 63842cccb285259345f52025ef57bdfd79657a2d Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 24 Jun 2008 13:09:26 +0000 Subject: Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working" After Linus fixed the inline assembly, the CFLAGS option is not needed anymore. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 8662a6b..25b352b 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -68,7 +68,6 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o -CFLAGS_hpwdt.o += -O obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o -- cgit v0.10.2 From 17c15da00c0e7289375ad57e8fea0c7892b74aa0 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Wed, 18 Jun 2008 11:30:40 -0500 Subject: [GFS2] BUG: unable to handle kernel paging request at ffff81002690e000 This patch fixes bugzilla bug bz448866: gfs2: BUG: unable to handle kernel paging request at ffff81002690e000. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 6387523..3401628 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -195,7 +195,7 @@ ulong_aligned: depending on architecture. I've experimented with several ways of writing this section such as using an else before the goto but this one seems to be the fastest. */ - while ((unsigned char *)plong < end - 1) { + while ((unsigned char *)plong < end - sizeof(unsigned long)) { prefetch(plong + 1); if (((*plong) & LBITMASK) != lskipval) break; -- cgit v0.10.2 From 28499143933f19b28008a556ed59255d6009391a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 9 May 2008 12:05:57 +0100 Subject: xen: remove support for non-PAE 32-bit Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 2e641be..525b108 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -6,7 +6,7 @@ config XEN bool "Xen guest support" select PARAVIRT depends on X86_32 - depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) + depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER) help This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c048de3..f09c1c6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -785,38 +785,35 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) static __init void xen_pagetable_setup_start(pgd_t *base) { pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base; + int i; /* special set_pte for pagetable initialization */ pv_mmu_ops.set_pte = xen_set_pte_init; init_mm.pgd = base; /* - * copy top-level of Xen-supplied pagetable into place. For - * !PAE we can use this as-is, but for PAE it is a stand-in - * while we copy the pmd pages. + * copy top-level of Xen-supplied pagetable into place. This + * is a stand-in while we copy the pmd pages. */ memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - if (PTRS_PER_PMD > 1) { - int i; - /* - * For PAE, need to allocate new pmds, rather than - * share Xen's, since Xen doesn't like pmd's being - * shared between address spaces. - */ - for (i = 0; i < PTRS_PER_PGD; i++) { - if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { - pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); + /* + * For PAE, need to allocate new pmds, rather than + * share Xen's, since Xen doesn't like pmd's being + * shared between address spaces. + */ + for (i = 0; i < PTRS_PER_PGD; i++) { + if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { + pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); - memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), - PAGE_SIZE); + memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), + PAGE_SIZE); - make_lowmem_page_readonly(pmd); + make_lowmem_page_readonly(pmd); - set_pgd(&base[i], __pgd(1 + __pa(pmd))); - } else - pgd_clear(&base[i]); - } + set_pgd(&base[i], __pgd(1 + __pa(pmd))); + } else + pgd_clear(&base[i]); } /* make sure zero_page is mapped RO so we can use it in pagetables */ @@ -873,17 +870,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ - { - unsigned level; - -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - pin_pagetable_pfn(level, PFN_DOWN(__pa(base))); - } + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } /* This is called once we have the cpu_possible_map */ @@ -1093,7 +1080,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pte = xen_make_pte, .make_pgd = xen_make_pgd, -#ifdef CONFIG_X86_PAE .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, .set_pud = xen_set_pud, @@ -1102,7 +1088,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pmd = xen_make_pmd, .pmd_val = xen_pmd_val, -#endif /* PAE */ .activate_mm = xen_activate_mm, .dup_mmap = xen_dup_mmap, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 265601d..df40bf7 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -228,7 +228,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) { return pte_mfn_to_pfn(pmd.pmd); } -#ifdef CONFIG_X86_PAE + void xen_set_pud(pud_t *ptr, pud_t val) { struct multicall_space mcs; @@ -276,12 +276,6 @@ pmd_t xen_make_pmd(pmdval_t pmd) pmd = pte_pfn_to_mfn(pmd); return native_make_pmd(pmd); } -#else /* !PAE */ -void xen_set_pte(pte_t *ptep, pte_t pte) -{ - *ptep = pte; -} -#endif /* CONFIG_X86_PAE */ /* (Yet another) pagetable walker. This one is intended for pinning a @@ -434,8 +428,6 @@ static int pin_page(struct page *page, enum pt_level level) read-only, and can be pinned. */ void xen_pgd_pin(pgd_t *pgd) { - unsigned level; - xen_mc_batch(); if (pgd_walk(pgd, pin_page, TASK_SIZE)) { @@ -445,14 +437,7 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_batch(); } -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - xen_do_pin(level, PFN_DOWN(__pa(pgd))); - + xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); xen_mc_issue(0); } diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index b5e189b..5fe961c 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -37,14 +37,13 @@ void xen_exit_mmap(struct mm_struct *mm); void xen_pgd_pin(pgd_t *pgd); //void xen_pgd_unpin(pgd_t *pgd); -#ifdef CONFIG_X86_PAE -unsigned long long xen_pte_val(pte_t); -unsigned long long xen_pmd_val(pmd_t); -unsigned long long xen_pgd_val(pgd_t); +pteval_t xen_pte_val(pte_t); +pmdval_t xen_pmd_val(pmd_t); +pgdval_t xen_pgd_val(pgd_t); -pte_t xen_make_pte(unsigned long long); -pmd_t xen_make_pmd(unsigned long long); -pgd_t xen_make_pgd(unsigned long long); +pte_t xen_make_pte(pteval_t); +pmd_t xen_make_pmd(pmdval_t); +pgd_t xen_make_pgd(pgdval_t); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); @@ -53,15 +52,4 @@ void xen_set_pud(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); - -#else -unsigned long xen_pte_val(pte_t); -unsigned long xen_pmd_val(pmd_t); -unsigned long xen_pgd_val(pgd_t); - -pte_t xen_make_pte(unsigned long); -pmd_t xen_make_pmd(unsigned long); -pgd_t xen_make_pgd(unsigned long); -#endif - #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 3175e97..6ec3b4f 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -30,11 +30,7 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen) ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") -#ifdef CONFIG_X86_PAE ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") -#else - ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no") -#endif ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") #endif /*CONFIG_XEN */ diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index baf3a4d..e11f240 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -150,13 +150,9 @@ static inline pte_t __pte_ma(pteval_t x) return (pte_t) { .pte = x }; } -#ifdef CONFIG_X86_PAE #define pmd_val_ma(v) ((v).pmd) #define pud_val_ma(v) ((v).pgd.pgd) #define __pmd_ma(x) ((pmd_t) { (x) } ) -#else /* !X86_PAE */ -#define pmd_val_ma(v) ((v).pud.pgd.pgd) -#endif /* CONFIG_X86_PAE */ #define pgd_val_ma(x) ((x).pgd) -- cgit v0.10.2 From a606b5e24b7e2937604f4c85023d8d9c5ab0a28b Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 24 Jun 2008 10:52:55 -0500 Subject: kgdb: documentation update - remove kgdboe kgdboe is not presently included kgdb, and there should be no references to it. Also fix the tcp port terminal connection example. Signed-off-by: Jason Wessel diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 028a844..e8acd1f 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -84,10 +84,9 @@ runs an instance of gdb against the vmlinux file which contains the symbols (not boot image such as bzImage, zImage, uImage...). In gdb the developer specifies the connection parameters and - connects to kgdb. Depending on which kgdb I/O modules exist in - the kernel for a given architecture, it may be possible to debug - the test machine's kernel with the development machine using a - rs232 or ethernet connection. + connects to kgdb. The type of connection a developer makes with + gdb depends on the availability of kgdb I/O modules compiled as + builtin's or kernel modules in the test machine's kernel. @@ -223,7 +222,7 @@ IMPORTANT NOTE: Using this option with kgdb over the console - (kgdboc) or kgdb over ethernet (kgdboe) is not supported. + (kgdboc) is not supported. @@ -249,18 +248,11 @@ (gdb) target remote /dev/ttyS0 - Example (kgdb to a terminal server): + Example (kgdb to a terminal server on tcp port 2012): % gdb ./vmlinux - (gdb) target remote udp:192.168.2.2:6443 - - - Example (kgdb over ethernet): - - - % gdb ./vmlinux - (gdb) target remote udp:192.168.2.2:6443 + (gdb) target remote 192.168.2.2:2012 Once connected, you can debug a kernel the way you would debug an -- cgit v0.10.2 From aabdc3b8c3b3d081f1532454e344208338478e29 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 24 Jun 2008 10:52:55 -0500 Subject: kgdb: sparse fix - Fix warning reported by sparse kernel/kgdb.c:1502:6: warning: symbol 'kgdb_console_write' was not declared. Should it be static? Signed-off-by: Jason Wessel diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 79e3c90..3ec23c3 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1499,7 +1499,8 @@ int kgdb_nmicallback(int cpu, void *regs) return 1; } -void kgdb_console_write(struct console *co, const char *s, unsigned count) +static void kgdb_console_write(struct console *co, const char *s, + unsigned count) { unsigned long flags; -- cgit v0.10.2 From c95e62ce8905aab62fed224eaaa9b8558a0ef652 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 23 Jun 2008 09:14:31 -0600 Subject: [SCSI] ses: Fix timeout Timeouts are measured in jiffies, not in seconds. Signed-off-by: Matthew Wilcox Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 45df83b..0fe031f 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -61,7 +61,7 @@ static int ses_probe(struct device *dev) return err; } -#define SES_TIMEOUT 30 +#define SES_TIMEOUT (30 * HZ) #define SES_RETRIES 3 static int ses_recv_diag(struct scsi_device *sdev, int page_code, -- cgit v0.10.2 From 2826f8c0f4c97b7db33e2a680f184d828eb7a785 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Tue, 24 Jun 2008 11:30:09 -0400 Subject: [IA64] Fix boot failure on ia64/sn2 Call check_sal_cache_flush() after platform_setup() as check_sal_cache_flush() now relies on being able to call platform vector code. Problem was introduced by: 3463a93def55c309f3c0d0a8aaf216be3be42d64 "Update check_sal_cache_flush to use platform_send_ipi()" Signed-off-by: Jes Sorensen Tested-by: Alex Chiang: Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index f48a809..4ae15c8 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -578,8 +578,6 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ mmu_context_init(); /* initialize context_id bitmap */ - check_sal_cache_flush(); - #ifdef CONFIG_ACPI acpi_boot_init(); #endif @@ -607,6 +605,7 @@ setup_arch (char **cmdline_p) ia64_mca_init(); platform_setup(cmdline_p); + check_sal_cache_flush(); paging_init(); } -- cgit v0.10.2 From 8097110d179b874d91c6495330c2b96c991e8c6e Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Tue, 24 Jun 2008 10:20:06 -0700 Subject: [IA64] Handle count==0 in sn2_ptc_proc_write() The fix applied in e0c6d97c65e0784aade7e97b9411f245a6c543e7 "security hole in sn2_ptc_proc_write" didn't take into account the case where count==0 (which results in a buffer underrun when adding the trailing '\0'). Thanks to Andi Kleen for pointing this out. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 6dd886c..e585f9a 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -512,7 +512,7 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si int cpu; char optstr[64]; - if (count > sizeof(optstr)) + if (count == 0 || count > sizeof(optstr)) return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; -- cgit v0.10.2 From e2569b7e572c0e6782380b3fdda901deb175d75a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 24 Jun 2008 10:22:05 +0200 Subject: [IA64] Eliminate NULL test after alloc_bootmem in iosapic_alloc_rte() As noted by Akinobu Mita alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. Signed-off-by: Julia Lawall Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 082c31d..39752cd 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -558,8 +558,6 @@ static struct iosapic_rte_info * __init_refok iosapic_alloc_rte (void) if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) { rte = alloc_bootmem(sizeof(struct iosapic_rte_info) * NR_PREALLOCATE_RTE_ENTRIES); - if (!rte) - return NULL; for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++) list_add(&rte->rte_list, &free_rte_list); } -- cgit v0.10.2 From 5af4e7a0bea715f2dd7190859a43eb2258b1f388 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Tue, 24 Jun 2008 12:53:38 -0500 Subject: [GFS2] fix gfs2 block allocation (cleaned up) This patch fixes bz 450641. This patch changes the computation for zero_metapath_length(), which it renames to metapath_branch_start(). When you are extending the metadata tree, The indirect blocks that point to the new data block must either diverge from the existing tree either at the inode, or at the first indirect block. They can diverge at the first indirect block because the inode has room for 483 pointers while the indirect blocks have room for 509 pointers, so when the tree is grown, there is some free space in the first indirect block. What metapath_branch_start() now computes is the height where the first indirect block for the new data block is located. It can either be 1 (if the indirect block diverges from the inode) or 2 (if it diverges from the first indirect block). Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index c19184f..bec76b1 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -246,15 +246,11 @@ static void find_metapath(const struct gfs2_sbd *sdp, u64 block, } -static inline unsigned int zero_metapath_length(const struct metapath *mp, - unsigned height) +static inline unsigned int metapath_branch_start(const struct metapath *mp) { - unsigned int i; - for (i = 0; i < height - 1; i++) { - if (mp->mp_list[i] != 0) - return i; - } - return height; + if (mp->mp_list[0] == 0) + return 2; + return 1; } /** @@ -436,7 +432,7 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, struct gfs2_sbd *sdp = GFS2_SB(inode); struct buffer_head *dibh = mp->mp_bh[0]; u64 bn, dblock = 0; - unsigned n, i, blks, alloced = 0, iblks = 0, zmpl = 0; + unsigned n, i, blks, alloced = 0, iblks = 0, branch_start = 0; unsigned dblks = 0; unsigned ptrs_per_blk; const unsigned end_of_metadata = height - 1; @@ -471,9 +467,8 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, /* Building up tree height */ state = ALLOC_GROW_HEIGHT; iblks = height - ip->i_height; - zmpl = zero_metapath_length(mp, height); - iblks -= zmpl; - iblks += height; + branch_start = metapath_branch_start(mp); + iblks += (height - branch_start); } } @@ -509,13 +504,13 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, sizeof(struct gfs2_meta_header)); *ptr = zero_bn; state = ALLOC_GROW_DEPTH; - for(i = zmpl; i < height; i++) { + for(i = branch_start; i < height; i++) { if (mp->mp_bh[i] == NULL) break; brelse(mp->mp_bh[i]); mp->mp_bh[i] = NULL; } - i = zmpl; + i = branch_start; } if (n == 0) break; -- cgit v0.10.2 From 7af192c954017499ec163bc9dbaaee2e593d7ef2 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:29 +0200 Subject: x86: Add structs and functions for paravirt clocksource This patch adds structs for the paravirt clocksource ABI used by both xen and kvm (pvclock-abi.h). It also adds some helper functions to read system time and wall clock time from a paravirtual clocksource (pvclock.[ch]). They are based on the xen code. They are enabled using CONFIG_PARAVIRT_CLOCK. Subsequent patches of this series will put the code in use. Signed-off-by: Gerd Hoffmann Acked-by: Jeremy Fitzhardinge Signed-off-by: Avi Kivity diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 52e18e6..f94bca6 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -410,6 +410,10 @@ config PARAVIRT over full virtualization. However, when run without a hypervisor the kernel is theoretically slower and slightly larger. +config PARAVIRT_CLOCK + bool + default n + endif config MEMTEST_BOOTPARAM diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3..77807d4 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -82,6 +82,7 @@ obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_KVM_GUEST) += kvm.o obj-$(CONFIG_KVM_CLOCK) += kvmclock.o obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o +obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c new file mode 100644 index 0000000..05fbe9a --- /dev/null +++ b/arch/x86/kernel/pvclock.c @@ -0,0 +1,141 @@ +/* paravirtual clock -- common code used by kvm/xen + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include +#include + +/* + * These are perodically updated + * xen: magic shared_info page + * kvm: gpa registered via msr + * and then copied here. + */ +struct pvclock_shadow_time { + u64 tsc_timestamp; /* TSC at last update of time vals. */ + u64 system_timestamp; /* Time, in nanosecs, since boot. */ + u32 tsc_to_nsec_mul; + int tsc_shift; + u32 version; +}; + +/* + * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, + * yielding a 64-bit result. + */ +static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) +{ + u64 product; +#ifdef __i386__ + u32 tmp1, tmp2; +#endif + + if (shift < 0) + delta >>= -shift; + else + delta <<= shift; + +#ifdef __i386__ + __asm__ ( + "mul %5 ; " + "mov %4,%%eax ; " + "mov %%edx,%4 ; " + "mul %5 ; " + "xor %5,%5 ; " + "add %4,%%eax ; " + "adc %5,%%edx ; " + : "=A" (product), "=r" (tmp1), "=r" (tmp2) + : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); +#elif __x86_64__ + __asm__ ( + "mul %%rdx ; shrd $32,%%rdx,%%rax" + : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); +#else +#error implement me! +#endif + + return product; +} + +static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow) +{ + u64 delta = native_read_tsc() - shadow->tsc_timestamp; + return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift); +} + +/* + * Reads a consistent set of time-base values from hypervisor, + * into a shadow data area. + */ +static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst, + struct pvclock_vcpu_time_info *src) +{ + do { + dst->version = src->version; + rmb(); /* fetch version before data */ + dst->tsc_timestamp = src->tsc_timestamp; + dst->system_timestamp = src->system_time; + dst->tsc_to_nsec_mul = src->tsc_to_system_mul; + dst->tsc_shift = src->tsc_shift; + rmb(); /* test version after fetching data */ + } while ((src->version & 1) || (dst->version != src->version)); + + return dst->version; +} + +cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) +{ + struct pvclock_shadow_time shadow; + unsigned version; + cycle_t ret, offset; + + do { + version = pvclock_get_time_values(&shadow, src); + barrier(); + offset = pvclock_get_nsec_offset(&shadow); + ret = shadow.system_timestamp + offset; + barrier(); + } while (version != src->version); + + return ret; +} + +void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock, + struct pvclock_vcpu_time_info *vcpu_time, + struct timespec *ts) +{ + u32 version; + u64 delta; + struct timespec now; + + /* get wallclock at system boot */ + do { + version = wall_clock->version; + rmb(); /* fetch version before time */ + now.tv_sec = wall_clock->sec; + now.tv_nsec = wall_clock->nsec; + rmb(); /* fetch time before checking version */ + } while ((wall_clock->version & 1) || (version != wall_clock->version)); + + delta = pvclock_clocksource_read(vcpu_time); /* time since system boot */ + delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec; + + now.tv_nsec = do_div(delta, NSEC_PER_SEC); + now.tv_sec = delta; + + set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); +} diff --git a/include/asm-x86/pvclock-abi.h b/include/asm-x86/pvclock-abi.h new file mode 100644 index 0000000..6857f84 --- /dev/null +++ b/include/asm-x86/pvclock-abi.h @@ -0,0 +1,42 @@ +#ifndef _ASM_X86_PVCLOCK_ABI_H_ +#define _ASM_X86_PVCLOCK_ABI_H_ +#ifndef __ASSEMBLY__ + +/* + * These structs MUST NOT be changed. + * They are the ABI between hypervisor and guest OS. + * Both Xen and KVM are using this. + * + * pvclock_vcpu_time_info holds the system time and the tsc timestamp + * of the last update. So the guest can use the tsc delta to get a + * more precise system time. There is one per virtual cpu. + * + * pvclock_wall_clock references the point in time when the system + * time was zero (usually boot time), thus the guest calculates the + * current wall clock by adding the system time. + * + * Protocol for the "version" fields is: hypervisor raises it (making + * it uneven) before it starts updating the fields and raises it again + * (making it even) when it is done. Thus the guest can make sure the + * time values it got are consistent by checking the version before + * and after reading them. + */ + +struct pvclock_vcpu_time_info { + u32 version; + u32 pad0; + u64 tsc_timestamp; + u64 system_time; + u32 tsc_to_system_mul; + s8 tsc_shift; + u8 pad[3]; +} __attribute__((__packed__)); /* 32 bytes */ + +struct pvclock_wall_clock { + u32 version; + u32 sec; + u32 nsec; +} __attribute__((__packed__)); + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_X86_PVCLOCK_ABI_H_ */ diff --git a/include/asm-x86/pvclock.h b/include/asm-x86/pvclock.h new file mode 100644 index 0000000..85b1bba --- /dev/null +++ b/include/asm-x86/pvclock.h @@ -0,0 +1,13 @@ +#ifndef _ASM_X86_PVCLOCK_H_ +#define _ASM_X86_PVCLOCK_H_ + +#include +#include + +/* some helper functions for xen and kvm pv clock sources */ +cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src); +void pvclock_read_wallclock(struct pvclock_wall_clock *wall, + struct pvclock_vcpu_time_info *vcpu, + struct timespec *ts); + +#endif /* _ASM_X86_PVCLOCK_H_ */ -- cgit v0.10.2 From 1c7b67f7576c4ca2a344379a4a29eec8fe8e7935 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:30 +0200 Subject: x86: Make xen use the paravirt clocksource structs and functions This patch updates the xen guest to use the pvclock structs and helper functions. Signed-off-by: Gerd Hoffmann Acked-by: Jeremy Fitzhardinge Signed-off-by: Avi Kivity diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 2e641be..3a4f16a 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -5,6 +5,7 @@ config XEN bool "Xen guest support" select PARAVIRT + select PARAVIRT_CLOCK depends on X86_32 depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) help diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 52b2e38..41e2175 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -14,6 +14,7 @@ #include #include +#include #include #include @@ -31,17 +32,6 @@ static cycle_t xen_clocksource_read(void); -/* These are perodically updated in shared_info, and then copied here. */ -struct shadow_time_info { - u64 tsc_timestamp; /* TSC at last update of time vals. */ - u64 system_timestamp; /* Time, in nanosecs, since boot. */ - u32 tsc_to_nsec_mul; - int tsc_shift; - u32 version; -}; - -static DEFINE_PER_CPU(struct shadow_time_info, shadow_time); - /* runstate info updated by Xen */ static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate); @@ -211,7 +201,7 @@ unsigned long long xen_sched_clock(void) unsigned long xen_cpu_khz(void) { u64 xen_khz = 1000000ULL << 32; - const struct vcpu_time_info *info = + const struct pvclock_vcpu_time_info *info = &HYPERVISOR_shared_info->vcpu_info[0].time; do_div(xen_khz, info->tsc_to_system_mul); @@ -223,121 +213,26 @@ unsigned long xen_cpu_khz(void) return xen_khz; } -/* - * Reads a consistent set of time-base values from Xen, into a shadow data - * area. - */ -static unsigned get_time_values_from_xen(void) -{ - struct vcpu_time_info *src; - struct shadow_time_info *dst; - - /* src is shared memory with the hypervisor, so we need to - make sure we get a consistent snapshot, even in the face of - being preempted. */ - src = &__get_cpu_var(xen_vcpu)->time; - dst = &__get_cpu_var(shadow_time); - - do { - dst->version = src->version; - rmb(); /* fetch version before data */ - dst->tsc_timestamp = src->tsc_timestamp; - dst->system_timestamp = src->system_time; - dst->tsc_to_nsec_mul = src->tsc_to_system_mul; - dst->tsc_shift = src->tsc_shift; - rmb(); /* test version after fetching data */ - } while ((src->version & 1) | (dst->version ^ src->version)); - - return dst->version; -} - -/* - * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, - * yielding a 64-bit result. - */ -static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) -{ - u64 product; -#ifdef __i386__ - u32 tmp1, tmp2; -#endif - - if (shift < 0) - delta >>= -shift; - else - delta <<= shift; - -#ifdef __i386__ - __asm__ ( - "mul %5 ; " - "mov %4,%%eax ; " - "mov %%edx,%4 ; " - "mul %5 ; " - "xor %5,%5 ; " - "add %4,%%eax ; " - "adc %5,%%edx ; " - : "=A" (product), "=r" (tmp1), "=r" (tmp2) - : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); -#elif __x86_64__ - __asm__ ( - "mul %%rdx ; shrd $32,%%rdx,%%rax" - : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); -#else -#error implement me! -#endif - - return product; -} - -static u64 get_nsec_offset(struct shadow_time_info *shadow) -{ - u64 now, delta; - now = native_read_tsc(); - delta = now - shadow->tsc_timestamp; - return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift); -} - static cycle_t xen_clocksource_read(void) { - struct shadow_time_info *shadow = &get_cpu_var(shadow_time); + struct pvclock_vcpu_time_info *src; cycle_t ret; - unsigned version; - - do { - version = get_time_values_from_xen(); - barrier(); - ret = shadow->system_timestamp + get_nsec_offset(shadow); - barrier(); - } while (version != __get_cpu_var(xen_vcpu)->time.version); - - put_cpu_var(shadow_time); + src = &get_cpu_var(xen_vcpu)->time; + ret = pvclock_clocksource_read(src); + put_cpu_var(xen_vcpu); return ret; } static void xen_read_wallclock(struct timespec *ts) { - const struct shared_info *s = HYPERVISOR_shared_info; - u32 version; - u64 delta; - struct timespec now; - - /* get wallclock at system boot */ - do { - version = s->wc_version; - rmb(); /* fetch version before time */ - now.tv_sec = s->wc_sec; - now.tv_nsec = s->wc_nsec; - rmb(); /* fetch time before checking version */ - } while ((s->wc_version & 1) | (version ^ s->wc_version)); + struct shared_info *s = HYPERVISOR_shared_info; + struct pvclock_wall_clock *wall_clock = &(s->wc); + struct pvclock_vcpu_time_info *vcpu_time; - delta = xen_clocksource_read(); /* time since system boot */ - delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec; - - now.tv_nsec = do_div(delta, NSEC_PER_SEC); - now.tv_sec = delta; - - set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); + vcpu_time = &get_cpu_var(xen_vcpu)->time; + pvclock_read_wallclock(wall_clock, vcpu_time, ts); + put_cpu_var(xen_vcpu); } unsigned long xen_get_wallclock(void) @@ -345,7 +240,6 @@ unsigned long xen_get_wallclock(void) struct timespec ts; xen_read_wallclock(&ts); - return ts.tv_sec; } @@ -569,8 +463,6 @@ __init void xen_time_init(void) { int cpu = smp_processor_id(); - get_time_values_from_xen(); - clocksource_register(&xen_clocksource); if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) { diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h index 9b018da..819a033 100644 --- a/include/xen/interface/xen.h +++ b/include/xen/interface/xen.h @@ -10,6 +10,7 @@ #define __XEN_PUBLIC_XEN_H__ #include +#include /* * XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS). @@ -336,7 +337,7 @@ struct vcpu_info { uint8_t evtchn_upcall_mask; unsigned long evtchn_pending_sel; struct arch_vcpu_info arch; - struct vcpu_time_info time; + struct pvclock_vcpu_time_info time; }; /* 64 bytes (x86) */ /* @@ -384,9 +385,7 @@ struct shared_info { * Wallclock time: updated only by control software. Guests should base * their gettimeofday() syscall on this wallclock-base value. */ - uint32_t wc_version; /* Version counter: see vcpu_time_info_t. */ - uint32_t wc_sec; /* Secs 00:00:00 UTC, Jan 1, 1970. */ - uint32_t wc_nsec; /* Nsecs 00:00:00 UTC, Jan 1, 1970. */ + struct pvclock_wall_clock wc; struct arch_shared_info arch; -- cgit v0.10.2 From 50d0a0f987b83a8dadb1134d834e35ec410392b5 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:31 +0200 Subject: KVM: Make kvm host use the paravirt clocksource structs This patch updates the kvm host code to use the pvclock structs. It also makes the paravirt clock compatible with Xen. Signed-off-by: Gerd Hoffmann Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b08812d..63a77ca 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -492,8 +492,8 @@ static int do_set_msr(struct kvm_vcpu *vcpu, unsigned index, u64 *data) static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) { static int version; - struct kvm_wall_clock wc; - struct timespec wc_ts; + struct pvclock_wall_clock wc; + struct timespec now, sys, boot; if (!wall_clock) return; @@ -502,10 +502,19 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) kvm_write_guest(kvm, wall_clock, &version, sizeof(version)); - wc_ts = current_kernel_time(); - wc.wc_sec = wc_ts.tv_sec; - wc.wc_nsec = wc_ts.tv_nsec; - wc.wc_version = version; + /* + * The guest calculates current wall clock time by adding + * system time (updated by kvm_write_guest_time below) to the + * wall clock specified here. guest system time equals host + * system time for us, thus we must fill in host boot time here. + */ + now = current_kernel_time(); + ktime_get_ts(&sys); + boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys)); + + wc.sec = boot.tv_sec; + wc.nsec = boot.tv_nsec; + wc.version = version; kvm_write_guest(kvm, wall_clock, &wc, sizeof(wc)); @@ -513,6 +522,45 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) kvm_write_guest(kvm, wall_clock, &version, sizeof(version)); } +static uint32_t div_frac(uint32_t dividend, uint32_t divisor) +{ + uint32_t quotient, remainder; + + /* Don't try to replace with do_div(), this one calculates + * "(dividend << 32) / divisor" */ + __asm__ ( "divl %4" + : "=a" (quotient), "=d" (remainder) + : "0" (0), "1" (dividend), "r" (divisor) ); + return quotient; +} + +static void kvm_set_time_scale(uint32_t tsc_khz, struct pvclock_vcpu_time_info *hv_clock) +{ + uint64_t nsecs = 1000000000LL; + int32_t shift = 0; + uint64_t tps64; + uint32_t tps32; + + tps64 = tsc_khz * 1000LL; + while (tps64 > nsecs*2) { + tps64 >>= 1; + shift--; + } + + tps32 = (uint32_t)tps64; + while (tps32 <= (uint32_t)nsecs) { + tps32 <<= 1; + shift++; + } + + hv_clock->tsc_shift = shift; + hv_clock->tsc_to_system_mul = div_frac(nsecs, tps32); + + pr_debug("%s: tsc_khz %u, tsc_shift %d, tsc_mul %u\n", + __FUNCTION__, tsc_khz, hv_clock->tsc_shift, + hv_clock->tsc_to_system_mul); +} + static void kvm_write_guest_time(struct kvm_vcpu *v) { struct timespec ts; @@ -523,6 +571,11 @@ static void kvm_write_guest_time(struct kvm_vcpu *v) if ((!vcpu->time_page)) return; + if (unlikely(vcpu->hv_clock_tsc_khz != tsc_khz)) { + kvm_set_time_scale(tsc_khz, &vcpu->hv_clock); + vcpu->hv_clock_tsc_khz = tsc_khz; + } + /* Keep irq disabled to prevent changes to the clock */ local_irq_save(flags); kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER, @@ -537,14 +590,14 @@ static void kvm_write_guest_time(struct kvm_vcpu *v) /* * The interface expects us to write an even number signaling that the * update is finished. Since the guest won't see the intermediate - * state, we just write "2" at the end + * state, we just increase by 2 at the end. */ - vcpu->hv_clock.version = 2; + vcpu->hv_clock.version += 2; shared_kaddr = kmap_atomic(vcpu->time_page, KM_USER0); memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock, - sizeof(vcpu->hv_clock)); + sizeof(vcpu->hv_clock)); kunmap_atomic(shared_kaddr, KM_USER0); @@ -599,10 +652,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) /* ...but clean it before doing the actual write */ vcpu->arch.time_offset = data & ~(PAGE_MASK | 1); - vcpu->arch.hv_clock.tsc_to_system_mul = - clocksource_khz2mult(tsc_khz, 22); - vcpu->arch.hv_clock.tsc_shift = 22; - down_read(¤t->mm->mmap_sem); vcpu->arch.time_page = gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT); diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h index 1d8cd01..844f2a8 100644 --- a/include/asm-x86/kvm_host.h +++ b/include/asm-x86/kvm_host.h @@ -18,6 +18,7 @@ #include #include +#include #include #define KVM_MAX_VCPUS 16 @@ -282,7 +283,8 @@ struct kvm_vcpu_arch { struct x86_emulate_ctxt emulate_ctxt; gpa_t time; - struct kvm_vcpu_time_info hv_clock; + struct pvclock_vcpu_time_info hv_clock; + unsigned int hv_clock_tsc_khz; unsigned int time_offset; struct page *time_page; }; -- cgit v0.10.2 From f6e16d5ad463d15f285666f588cfe49495c692d9 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:32 +0200 Subject: x86: KVM guest: Use the paravirt clocksource structs and functions This patch updates the kvm host code to use the pvclock structs and functions, thereby making it compatible with Xen. The patch also fixes an initialization bug: on SMP systems the per-cpu has two different locations early at boot and after CPU bringup. kvmclock must take that in account when registering the physical address within the host. Signed-off-by: Gerd Hoffmann Signed-off-by: Avi Kivity diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f94bca6..e0edaaa 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -383,6 +383,7 @@ config VMI config KVM_CLOCK bool "KVM paravirtualized clock" select PARAVIRT + select PARAVIRT_CLOCK depends on !(X86_VISWS || X86_VOYAGER) help Turning on this option will allow you to run a paravirtualized clock diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 08a3098..87edf1c 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -36,18 +37,9 @@ static int parse_no_kvmclock(char *arg) early_param("no-kvmclock", parse_no_kvmclock); /* The hypervisor will put information about time periodically here */ -static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock); -#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field +static DEFINE_PER_CPU_SHARED_ALIGNED(struct pvclock_vcpu_time_info, hv_clock); +static struct pvclock_wall_clock wall_clock; -static inline u64 kvm_get_delta(u64 last_tsc) -{ - int cpu = smp_processor_id(); - u64 delta = native_read_tsc() - last_tsc; - return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE; -} - -static struct kvm_wall_clock wall_clock; -static cycle_t kvm_clock_read(void); /* * The wallclock is the time of day when we booted. Since then, some time may * have elapsed since the hypervisor wrote the data. So we try to account for @@ -55,64 +47,37 @@ static cycle_t kvm_clock_read(void); */ static unsigned long kvm_get_wallclock(void) { - u32 wc_sec, wc_nsec; - u64 delta; + struct pvclock_vcpu_time_info *vcpu_time; struct timespec ts; - int version, nsec; int low, high; low = (int)__pa(&wall_clock); high = ((u64)__pa(&wall_clock) >> 32); + native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - delta = kvm_clock_read(); + vcpu_time = &get_cpu_var(hv_clock); + pvclock_read_wallclock(&wall_clock, vcpu_time, &ts); + put_cpu_var(hv_clock); - native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - do { - version = wall_clock.wc_version; - rmb(); - wc_sec = wall_clock.wc_sec; - wc_nsec = wall_clock.wc_nsec; - rmb(); - } while ((wall_clock.wc_version != version) || (version & 1)); - - delta = kvm_clock_read() - delta; - delta += wc_nsec; - nsec = do_div(delta, NSEC_PER_SEC); - set_normalized_timespec(&ts, wc_sec + delta, nsec); - /* - * Of all mechanisms of time adjustment I've tested, this one - * was the champion! - */ - return ts.tv_sec + 1; + return ts.tv_sec; } static int kvm_set_wallclock(unsigned long now) { - return 0; + return -1; } -/* - * This is our read_clock function. The host puts an tsc timestamp each time - * it updates a new time. Without the tsc adjustment, we can have a situation - * in which a vcpu starts to run earlier (smaller system_time), but probes - * time later (compared to another vcpu), leading to backwards time - */ static cycle_t kvm_clock_read(void) { - u64 last_tsc, now; - int cpu; + struct pvclock_vcpu_time_info *src; + cycle_t ret; - preempt_disable(); - cpu = smp_processor_id(); - - last_tsc = get_clock(cpu, tsc_timestamp); - now = get_clock(cpu, system_time); - - now += kvm_get_delta(last_tsc); - preempt_enable(); - - return now; + src = &get_cpu_var(hv_clock); + ret = pvclock_clocksource_read(src); + put_cpu_var(hv_clock); + return ret; } + static struct clocksource kvm_clock = { .name = "kvm-clock", .read = kvm_clock_read, @@ -123,13 +88,14 @@ static struct clocksource kvm_clock = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int kvm_register_clock(void) +static int kvm_register_clock(char *txt) { int cpu = smp_processor_id(); int low, high; low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1; high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32); - + printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n", + cpu, high, low, txt); return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high); } @@ -140,12 +106,20 @@ static void kvm_setup_secondary_clock(void) * Now that the first cpu already had this clocksource initialized, * we shouldn't fail. */ - WARN_ON(kvm_register_clock()); + WARN_ON(kvm_register_clock("secondary cpu clock")); /* ok, done with our trickery, call native */ setup_secondary_APIC_clock(); } #endif +#ifdef CONFIG_SMP +void __init kvm_smp_prepare_boot_cpu(void) +{ + WARN_ON(kvm_register_clock("primary cpu clock")); + native_smp_prepare_boot_cpu(); +} +#endif + /* * After the clock is registered, the host will keep writing to the * registered memory location. If the guest happens to shutdown, this memory @@ -174,7 +148,7 @@ void __init kvmclock_init(void) return; if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { - if (kvm_register_clock()) + if (kvm_register_clock("boot clock")) return; pv_time_ops.get_wallclock = kvm_get_wallclock; pv_time_ops.set_wallclock = kvm_set_wallclock; @@ -182,6 +156,9 @@ void __init kvmclock_init(void) #ifdef CONFIG_X86_LOCAL_APIC pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock; #endif +#ifdef CONFIG_SMP + smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu; +#endif machine_ops.shutdown = kvm_shutdown; #ifdef CONFIG_KEXEC machine_ops.crash_shutdown = kvm_crash_shutdown; -- cgit v0.10.2 From 6b1ed9086592fd4b066daae222751bb6757ca5eb Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:33 +0200 Subject: KVM: Remove now unused structs from kvm_para.h The kvm_* structs are obsoleted by the pvclock_* ones. Now all users have been switched over and the old structs can be dropped. Signed-off-by: Gerd Hoffmann Signed-off-by: Avi Kivity diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h index 5098459..bfd9900 100644 --- a/include/asm-x86/kvm_para.h +++ b/include/asm-x86/kvm_para.h @@ -48,24 +48,6 @@ struct kvm_mmu_op_release_pt { #ifdef __KERNEL__ #include -/* xen binary-compatible interface. See xen headers for details */ -struct kvm_vcpu_time_info { - uint32_t version; - uint32_t pad0; - uint64_t tsc_timestamp; - uint64_t system_time; - uint32_t tsc_to_system_mul; - int8_t tsc_shift; - int8_t pad[3]; -} __attribute__((__packed__)); /* 32 bytes */ - -struct kvm_wall_clock { - uint32_t wc_version; - uint32_t wc_sec; - uint32_t wc_nsec; -} __attribute__((__packed__)); - - extern void kvmclock_init(void); -- cgit v0.10.2 From ea7b44c8e6baa1a4507f05ba2c0009ac21c3fe0b Mon Sep 17 00:00:00 2001 From: Jie Luo Date: Tue, 24 Jun 2008 10:38:31 -0700 Subject: enable bus mastering on i915 at resume time On 9xx chips, bus mastering needs to be enabled at resume time for much of the chip to function. With this patch, vblank interrupts will work as expected on resume, along with other chip functions. Fixes kernel bugzilla #10844. Signed-off-by: Jie Luo Signed-off-by: Jesse Barnes Signed-off-by: Linus Torvalds diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c index e8f3d68..93aed1c 100644 --- a/drivers/char/drm/i915_drv.c +++ b/drivers/char/drm/i915_drv.c @@ -389,6 +389,7 @@ static int i915_resume(struct drm_device *dev) pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) return -1; + pci_set_master(dev->pdev); pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); -- cgit v0.10.2 From eadc49b1a8d09480f14caea292142f103a89c77a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 17 Jun 2008 23:53:22 -0700 Subject: [SCSI] esp: Fix OOPS in esp_reset_cleanup(). OOPS reported by Friedrich Oslage The problem here is that tp->starget is set every time a lun is allocated for a particular target so we can catch the sdev_target parent value. The reset handler uses the NULL'ness of this value to determine which targets are active. But esp_slave_destroy() does not NULL out this value when appropriate. So for every target that doesn't respond, the SCSI bus scan causes a stale pointer to be left here, with ensuing crashes like you're seeing. Signed-off-by: David S. Miller Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index a0b6d41..305edde 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2371,6 +2371,7 @@ static int esp_slave_alloc(struct scsi_device *dev) dev->hostdata = lp; tp->starget = dev->sdev_target; + tp->starget_ref++; spi_min_period(tp->starget) = esp->min_period; spi_max_offset(tp->starget) = 15; @@ -2425,10 +2426,17 @@ static int esp_slave_configure(struct scsi_device *dev) static void esp_slave_destroy(struct scsi_device *dev) { + struct esp *esp = shost_priv(dev->host); + struct esp_target_data *tp = &esp->target[dev->id]; struct esp_lun_data *lp = dev->hostdata; kfree(lp); dev->hostdata = NULL; + + BUG_ON(tp->starget_ref <= 0); + + if (!--tp->starget_ref) + tp->starget = NULL; } static int esp_eh_abort_handler(struct scsi_cmnd *cmd) diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h index bb43a13..655e0b2 100644 --- a/drivers/scsi/esp_scsi.h +++ b/drivers/scsi/esp_scsi.h @@ -322,6 +322,7 @@ struct esp_target_data { u8 nego_goal_tags; struct scsi_target *starget; + int starget_ref; }; struct esp_event_ent { -- cgit v0.10.2 From 543cf4cb3fe6f6cae3651ba918b9c56200b257d0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 24 Jun 2008 18:58:20 -0700 Subject: Linux 2.6.26-rc8 diff --git a/Makefile b/Makefile index 2b4977c..6aff5f4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v0.10.2 From 13d5ef97f0675d789f559cfebc1df9d5e2b1879c Mon Sep 17 00:00:00 2001 From: Peng Haitao Date: Fri, 16 May 2008 10:15:04 +0800 Subject: [PATCH] kernel/audit.c: nlh->nlmsg_type is gotten more than once The first argument "nlh->nlmsg_type" of audit_receive_filter() should be modified to "msg_type" in audit_receive_msg(). Signed-off-by: Peng Haitao Signed-off-by: Al Viro diff --git a/kernel/audit.c b/kernel/audit.c index e8692a5..56f3028 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -779,7 +779,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) } /* fallthrough */ case AUDIT_LIST: - err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid, + err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid, uid, seq, data, nlmsg_len(nlh), loginuid, sessionid, sid); break; @@ -798,7 +798,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) } /* fallthrough */ case AUDIT_LIST_RULES: - err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid, + err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid, uid, seq, data, nlmsg_len(nlh), loginuid, sessionid, sid); break; -- cgit v0.10.2 From 9f0aecdd1cd6aacee9aa8f08031f4f2e09e454dc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 19 May 2008 15:09:21 -0700 Subject: [PATCH] audit: fix kernel-doc parameter notation Fix auditfilter kernel-doc misssing parameter description: Warning(lin2626-rc3//kernel/auditfilter.c:1551): No description found for parameter 'sessionid' Signed-off-by: Randy Dunlap Signed-off-by: Al Viro diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 0e0bd27e..75cdf26 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1544,6 +1544,7 @@ static void audit_log_rule_change(uid_t loginuid, u32 sessionid, u32 sid, * @data: payload data * @datasz: size of payload data * @loginuid: loginuid of sender + * @sessionid: sessionid for netlink audit message * @sid: SE Linux Security ID of sender */ int audit_receive_filter(int type, int pid, int uid, int seq, void *data, -- cgit v0.10.2 From d8de72473effd674a3c1fe9621821f406f5587c9 Mon Sep 17 00:00:00 2001 From: Peng Haitao Date: Tue, 20 May 2008 09:13:02 +0800 Subject: [PATCH] remove useless argument type in audit_filter_user() The second argument "type" is not used in audit_filter_user(), so I think that type can be removed. If I'm wrong, please tell me. Signed-off-by: Peng Haitao Signed-off-by: Al Viro diff --git a/include/linux/audit.h b/include/linux/audit.h index 63c3bb9..8b82974 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -571,7 +571,7 @@ extern void audit_log_lost(const char *message); extern int audit_update_lsm_rules(void); /* Private API (for audit.c only) */ -extern int audit_filter_user(struct netlink_skb_parms *cb, int type); +extern int audit_filter_user(struct netlink_skb_parms *cb); extern int audit_filter_type(int type); extern int audit_receive_filter(int type, int pid, int uid, int seq, void *data, size_t datasz, uid_t loginuid, diff --git a/kernel/audit.c b/kernel/audit.c index 56f3028..e092f1c 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -738,7 +738,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) if (!audit_enabled && msg_type != AUDIT_USER_AVC) return 0; - err = audit_filter_user(&NETLINK_CB(skb), msg_type); + err = audit_filter_user(&NETLINK_CB(skb)); if (err == 1) { err = 0; if (msg_type == AUDIT_USER_TTY) { diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 75cdf26..98c50cc 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1721,7 +1721,7 @@ static int audit_filter_user_rules(struct netlink_skb_parms *cb, return 1; } -int audit_filter_user(struct netlink_skb_parms *cb, int type) +int audit_filter_user(struct netlink_skb_parms *cb) { enum audit_state state = AUDIT_DISABLED; struct audit_entry *e; -- cgit v0.10.2 From 71a7d1556264c1ad84b1bcf5f7a9cbc980b1e1fd Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 25 Jun 2008 12:02:07 +0800 Subject: Blackfin arch: fix bug - kernel boot fails when Spinlock and rw-lock debugging enabled Initialize the lock of bad_irq_desc properly. The content of irq_desc array is replaced by bad_irq_desc in blackfin arch irqchip init code. So, do it properly as common irq init code. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 73647c1..07402f5 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -60,9 +60,14 @@ static struct irq_chip bad_chip = { }; static struct irq_desc bad_irq_desc = { + .status = IRQ_DISABLED, .chip = &bad_chip, .handle_irq = handle_bad_irq, .depth = 1, + .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock), +#ifdef CONFIG_SMP + .affinity = CPU_MASK_ALL +#endif }; int show_interrupts(struct seq_file *p, void *v) -- cgit v0.10.2 From 8d0a60032ffd472f0f7821ff388e9f438c06077a Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 25 Jun 2008 12:41:51 +0800 Subject: Blackfin arch: fix up section mismatch warning -- WARNING: vmlinux.o(.text+0x721a): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7238): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7250): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7264): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72a2): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72bc): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72d4): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72e8): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. -- Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 917325b..6be0c50 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -254,7 +254,8 @@ close_cplbtab(struct cplb_tab *table) } /* helper function */ -static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +static void __init +__fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) { if (cplb_data[i].psize) { fill_cplbtab(t, @@ -291,7 +292,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en } } -static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +static void __init +__fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) { if (cplb_data[i].psize) { fill_cplbtab(t, -- cgit v0.10.2 From ec5e69f6d3f4350681d6f7eaae515cf014be9276 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 23 Jun 2008 14:52:09 -0500 Subject: [SCSI] esp: tidy up target reference counting The esp driver currently does hand rolled reference counting of its target. It's much easier to do what it needs to do if it's plugged into the mid-layer callbacks (target_alloc and target_destroy) which were designed for this case, so do it this way and get rid of the internal target reference count. Acked-by: David S. Miller Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 305edde..59fbef0 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2359,6 +2359,24 @@ void scsi_esp_unregister(struct esp *esp) } EXPORT_SYMBOL(scsi_esp_unregister); +static int esp_target_alloc(struct scsi_target *starget) +{ + struct esp *esp = shost_priv(dev_to_shost(&starget->dev)); + struct esp_target_data *tp = &esp->target[starget->id]; + + tp->starget = starget; + + return 0; +} + +static void esp_target_destroy(struct scsi_target *starget) +{ + struct esp *esp = shost_priv(dev_to_shost(&starget->dev)); + struct esp_target_data *tp = &esp->target[starget->id]; + + tp->starget = NULL; +} + static int esp_slave_alloc(struct scsi_device *dev) { struct esp *esp = shost_priv(dev->host); @@ -2370,9 +2388,6 @@ static int esp_slave_alloc(struct scsi_device *dev) return -ENOMEM; dev->hostdata = lp; - tp->starget = dev->sdev_target; - tp->starget_ref++; - spi_min_period(tp->starget) = esp->min_period; spi_max_offset(tp->starget) = 15; @@ -2426,17 +2441,10 @@ static int esp_slave_configure(struct scsi_device *dev) static void esp_slave_destroy(struct scsi_device *dev) { - struct esp *esp = shost_priv(dev->host); - struct esp_target_data *tp = &esp->target[dev->id]; struct esp_lun_data *lp = dev->hostdata; kfree(lp); dev->hostdata = NULL; - - BUG_ON(tp->starget_ref <= 0); - - if (!--tp->starget_ref) - tp->starget = NULL; } static int esp_eh_abort_handler(struct scsi_cmnd *cmd) @@ -2616,6 +2624,8 @@ struct scsi_host_template scsi_esp_template = { .name = "esp", .info = esp_info, .queuecommand = esp_queuecommand, + .target_alloc = esp_target_alloc, + .target_destroy = esp_target_destroy, .slave_alloc = esp_slave_alloc, .slave_configure = esp_slave_configure, .slave_destroy = esp_slave_destroy, diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h index 655e0b2..bb43a13 100644 --- a/drivers/scsi/esp_scsi.h +++ b/drivers/scsi/esp_scsi.h @@ -322,7 +322,6 @@ struct esp_target_data { u8 nego_goal_tags; struct scsi_target *starget; - int starget_ref; }; struct esp_event_ent { -- cgit v0.10.2 From 9e6c29768fc05d32ba1342b9348957b24bc476c2 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 22 Jun 2008 04:27:27 +0100 Subject: [ARM] 5117/1: pxafb: fix __devinit/exit annotations This patch fixes pxafb's init/exit annotations. It uses __devinit/exit for probe functions and __init for init functions. g_options is left as __devinitdata since it is used by both. Signed-off-by: Jaya Kumar Acked-by: Krzysztof Helt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 796e0d1..fafe7db 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1246,7 +1246,7 @@ static int pxafb_resume(struct platform_device *dev) * cache. Once this area is remapped, all virtual memory * access to the video memory should occur at the new region. */ -static int __init pxafb_map_video_memory(struct pxafb_info *fbi) +static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi) { /* * We reserve one page for the palette, plus the size @@ -1348,7 +1348,7 @@ decode_mode: pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes); } -static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) +static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev) { struct pxafb_info *fbi; void *addr; @@ -1410,7 +1410,7 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) } #ifdef CONFIG_FB_PXA_PARAMETERS -static int __init parse_opt_mode(struct device *dev, const char *this_opt) +static int __devinit parse_opt_mode(struct device *dev, const char *this_opt) { struct pxafb_mach_info *inf = dev->platform_data; @@ -1469,7 +1469,7 @@ done: return 0; } -static int __init parse_opt(struct device *dev, char *this_opt) +static int __devinit parse_opt(struct device *dev, char *this_opt) { struct pxafb_mach_info *inf = dev->platform_data; struct pxafb_mode_info *mode = &inf->modes[0]; @@ -1567,7 +1567,7 @@ static int __init parse_opt(struct device *dev, char *this_opt) return 0; } -static int __init pxafb_parse_options(struct device *dev, char *options) +static int __devinit pxafb_parse_options(struct device *dev, char *options) { char *this_opt; int ret; @@ -1589,7 +1589,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options) static char g_options[256] __devinitdata = ""; #ifndef MODULE -static int __devinit pxafb_setup_options(void) +static int __init pxafb_setup_options(void) { char *options = NULL; @@ -1613,7 +1613,7 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)"); #define pxafb_setup_options() (0) #endif -static int __init pxafb_probe(struct platform_device *dev) +static int __devinit pxafb_probe(struct platform_device *dev) { struct pxafb_info *fbi; struct pxafb_mach_info *inf; @@ -1801,7 +1801,7 @@ static struct platform_driver pxafb_driver = { }, }; -static int __devinit pxafb_init(void) +static int __init pxafb_init(void) { if (pxafb_setup_options()) return -EINVAL; -- cgit v0.10.2 From 16d752397301b95abaa95cbaf9e785d221872311 Mon Sep 17 00:00:00 2001 From: Rene Herman Date: Tue, 24 Jun 2008 19:38:56 +0200 Subject: thermal: Create CONFIG_THERMAL_HWMON=n A bug in libsensors <= 2.10.6 is exposed when this new hwmon I/F is enabled. Create CONFIG_THERMAL_HWMON=n until some time after libsensors 2.10.7 ships so those users can run the latest kernel. libsensors 3.x is already fixed -- those users can use CONFIG_THERMAL_HWMON=y now. Signed-off-by: Rene Herman Acked-by: Mark M. Hoffman Signed-off-by: Len Brown diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 5b3f31f..46ece3f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -312,3 +312,12 @@ When: 2.6.26 Why: Implementation became generic; users should now include linux/semaphore.h instead. Who: Matthew Wilcox + +--------------------------- + +What: CONFIG_THERMAL_HWMON +When: January 2009 +Why: This option was introduced just to allow older lm-sensors userspace + to keep working over the upgrade to 2.6.26. At the scheduled time of + removal fixed lm-sensors (2.x or 3.x) should be readily available. +Who: Rene Herman diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 4b62852..a86e952 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -12,3 +12,12 @@ menuconfig THERMAL cooling devices. All platforms with ACPI thermal support can use this driver. If you want this support, you should say Y or M here. + +config THERMAL_HWMON + bool "Hardware monitoring support" + depends on HWMON=y || HWMON=THERMAL + help + The generic thermal sysfs driver's hardware monitoring support + requires a 2.10.7/3.0.2 or later lm-sensors userspace. + + Say Y if your user-space is new enough. diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 6098787..fe07462 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -295,8 +295,8 @@ thermal_cooling_device_trip_point_show(struct device *dev, /* Device management */ -#if defined(CONFIG_HWMON) || \ - (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE)) +#if defined(CONFIG_THERMAL_HWMON) + /* hwmon sys I/F */ #include static LIST_HEAD(thermal_hwmon_list); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 06d3e6e..917707e 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -66,8 +66,7 @@ struct thermal_cooling_device { ((long)t-2732+5)/10 : ((long)t-2732-5)/10) #define CELSIUS_TO_KELVIN(t) ((t)*10+2732) -#if defined(CONFIG_HWMON) || \ - (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE)) +#if defined(CONFIG_THERMAL_HWMON) /* thermal zone devices with the same type share one hwmon device */ struct thermal_hwmon_device { char type[THERMAL_NAME_LENGTH]; @@ -94,8 +93,7 @@ struct thermal_zone_device { struct idr idr; struct mutex lock; /* protect cooling devices list */ struct list_head node; -#if defined(CONFIG_HWMON) || \ - (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE)) +#if defined(CONFIG_THERMAL_HWMON) struct list_head hwmon_node; struct thermal_hwmon_device *hwmon; struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ -- cgit v0.10.2 From 4389ed2ff61de2b1485b31bf342da913dd342f59 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 20 Jun 2008 15:39:09 +0200 Subject: ACPI: don't walk tables if ACPI was disabled Ingo Molnar wrote: > -tip auto-testing started triggering this spinlock corruption message > yesterday: > > [ 3.976213] calling acpi_rtc_init+0x0/0xd3 > [ 3.980213] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C50000 could not acquire Mutex [3] [20080321] > [ 3.992213] BUG: spinlock bad magic on CPU#0, swapper/1 > [ 3.992213] lock: c2508dc4, .magic: 00000000, .owner: swapper/1, .owner_cpu: 0 This is apparently because some parts of ACPI, including mutexes, are not initialized when acpi=off is passed to the kernel. Reported-by: Ingo Molnar Signed-off-by: Vegard Nossum Signed-off-by: Len Brown diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 2808dc6..9b227d4 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -333,6 +333,9 @@ static int __init acpi_rtc_init(void) { struct device *dev = get_rtc_dev(); + if (acpi_disabled) + return 0; + if (dev) { rtc_wake_setup(); rtc_info.wake_on = rtc_wake_on; -- cgit v0.10.2 From 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 24 Jun 2008 22:57:12 -0400 Subject: dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled. Signed-off-by: Len Brown diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index 26038c2..61b6c5b 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -377,6 +377,9 @@ static int __init bay_init(void) INIT_LIST_HEAD(&drive_bays); + if (acpi_disabled) + return -ENODEV; + /* look for dockable drive bays */ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, find_bay, &bays, NULL); diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 96c542f..bb7c51f 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -917,6 +917,9 @@ static int __init dock_init(void) dock_station = NULL; + if (acpi_disabled) + return 0; + /* look for a dock station */ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, find_dock, &num, NULL); -- cgit v0.10.2 From 41aefdcc98fdba47459eab67630293d67e855fc3 Mon Sep 17 00:00:00 2001 From: Max Asbock Date: Wed, 25 Jun 2008 14:45:28 -0700 Subject: x86: shift bits the right way in native_read_tscp native_read_tscp shifts the bits in the high order value in the wrong direction, the attached patch fixes that. Signed-off-by: Max Asbock Acked-by: Glauber Costa Signed-off-by: Ingo Molnar diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h index 3707650..2b5f2c9 100644 --- a/include/asm-x86/msr.h +++ b/include/asm-x86/msr.h @@ -18,7 +18,7 @@ static inline unsigned long long native_read_tscp(unsigned int *aux) unsigned long low, high; asm volatile(".byte 0x0f,0x01,0xf9" : "=a" (low), "=d" (high), "=c" (*aux)); - return low | ((u64)high >> 32); + return low | ((u64)high << 32); } /* -- cgit v0.10.2 From 0b1faeef5f9243bb5fc5713a34bbf1ceab0de562 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Sun, 15 Jun 2008 12:32:15 +0100 Subject: x86: section/warning fixes WARNING: arch/x86/mm/built-in.o(.text+0x3a1): Section mismatch in reference from the function set_pte_phys() to the function .init.text:spp_getpage() The function set_pte_phys() references the function __init spp_getpage(). This is often because set_pte_phys lacks a __init annotation or the annotation of spp_getpage is wrong. arch/x86/mm/init_64.c: In function 'early_memtest': arch/x86/mm/init_64.c:520: warning: passing argument 2 of 'find_e820_area_size' from incompatible pointer type Signed-off-by: Daniel J Blueman Cc: "Linus Torvalds" Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 156e6d7..f6d20be 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -135,7 +135,7 @@ static __init void *spp_getpage(void) return ptr; } -static void +static __init void set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot) { pgd_t *pgd; @@ -214,7 +214,7 @@ void __init cleanup_highmap(void) } /* NOTE: this is meant to be run only at boot */ -void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) +void __init __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) { unsigned long address = __fix_to_virt(idx); @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - u64 t_start, t_size; + unsigned long t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016llx - %016llx pattern %d", + printk(KERN_CONT "\n %016lx - %016lx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From fde60748d2f0345cabff20d25458c67d4ac06034 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 5 Jun 2008 18:59:08 -0300 Subject: V4L/DVB (8004): Fix INPUT dependency at budget-ci As reported by Ingo Molnar: MODPOST 346 modules ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined! This occurs when: CONFIG_INPUT=n CONFIG_VIDEO_IR=m CONFIG_DVB_BUDGET_CI=m Thanks-to: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index d4339b1..07643e0 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -101,6 +101,7 @@ config DVB_BUDGET config DVB_BUDGET_CI tristate "Budget cards with onboard CI connector" depends on DVB_BUDGET_CORE && I2C + depends on INPUT # due to IR select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE -- cgit v0.10.2 From bf67cac1314ba29676fbac2decde0e2e0a8170f8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 7 Jun 2008 15:54:10 -0300 Subject: V4L/DVB (8005): Fix OOPS if frontend is null Thanks to timf and Mike Galbraith to report this issue. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 469f93a..726f01c 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1338,7 +1338,8 @@ static int dvb_init(struct saa7134_dev *dev) return ret; dettach_frontend: - dvb_frontend_detach(dev->dvb.frontend); + if (dev->dvb.frontend) + dvb_frontend_detach(dev->dvb.frontend); dev->dvb.frontend = NULL; return -1; -- cgit v0.10.2 From 45270a1531a2aa90dd890666913c25a1e6f5e8eb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 7 Jun 2008 11:18:17 -0300 Subject: V4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputs The S-Video LUMA input was restricted to the In1-In4 inputs, but it turns out that it can use the full range of In1-In8. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 9a26751..8f2959a 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -228,7 +228,7 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, if ((vid_input & ~0xff0) || luma < CX18_AV_SVIDEO_LUMA1 || - luma > CX18_AV_SVIDEO_LUMA4 || + luma > CX18_AV_SVIDEO_LUMA8 || chroma < CX18_AV_SVIDEO_CHROMA4 || chroma > CX18_AV_SVIDEO_CHROMA8) { CX18_ERR("0x%04x is not a valid video input!\n", diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 786901d..39f3c93 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -37,12 +37,16 @@ enum cx18_av_video_input { CX18_AV_COMPOSITE7, CX18_AV_COMPOSITE8, - /* S-Video inputs consist of one luma input (In1-In4) ORed with one + /* S-Video inputs consist of one luma input (In1-In8) ORed with one chroma input (In5-In8) */ CX18_AV_SVIDEO_LUMA1 = 0x10, CX18_AV_SVIDEO_LUMA2 = 0x20, CX18_AV_SVIDEO_LUMA3 = 0x30, CX18_AV_SVIDEO_LUMA4 = 0x40, + CX18_AV_SVIDEO_LUMA5 = 0x50, + CX18_AV_SVIDEO_LUMA6 = 0x60, + CX18_AV_SVIDEO_LUMA7 = 0x70, + CX18_AV_SVIDEO_LUMA8 = 0x80, CX18_AV_SVIDEO_CHROMA4 = 0x400, CX18_AV_SVIDEO_CHROMA5 = 0x500, CX18_AV_SVIDEO_CHROMA6 = 0x600, diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 607efdc..1da6f13 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -433,7 +433,7 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp int chroma = vid_input & 0xf00; if ((vid_input & ~0xff0) || - luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 || + luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 || chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { v4l_err(client, "0x%04x is not a valid video input!\n", vid_input); diff --git a/include/media/cx25840.h b/include/media/cx25840.h index cd599ad..db431d5 100644 --- a/include/media/cx25840.h +++ b/include/media/cx25840.h @@ -32,12 +32,16 @@ enum cx25840_video_input { CX25840_COMPOSITE7, CX25840_COMPOSITE8, - /* S-Video inputs consist of one luma input (In1-In4) ORed with one + /* S-Video inputs consist of one luma input (In1-In8) ORed with one chroma input (In5-In8) */ CX25840_SVIDEO_LUMA1 = 0x10, CX25840_SVIDEO_LUMA2 = 0x20, CX25840_SVIDEO_LUMA3 = 0x30, CX25840_SVIDEO_LUMA4 = 0x40, + CX25840_SVIDEO_LUMA5 = 0x50, + CX25840_SVIDEO_LUMA6 = 0x60, + CX25840_SVIDEO_LUMA7 = 0x70, + CX25840_SVIDEO_LUMA8 = 0x80, CX25840_SVIDEO_CHROMA4 = 0x400, CX25840_SVIDEO_CHROMA5 = 0x500, CX25840_SVIDEO_CHROMA6 = 0x600, -- cgit v0.10.2 From d3d9b803eead0a536d28ffc31c5fadae976991cc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 8 Jun 2008 06:05:18 -0300 Subject: V4L/DVB (8008): cx18: remove duplicate audio and video input enums cx18-cards.h had a copy of the audio and video input enums from cx18-av-core.h, but with different prefixes. Removed that copy and used the ones from cx18-av-core.h. Thanks to Andy Walls for the report. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index baccd07..c35eb53 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -23,6 +23,7 @@ #include "cx18-driver.h" #include "cx18-cards.h" +#include "cx18-av-core.h" #include "cx18-i2c.h" #include @@ -54,22 +55,22 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345 | CX18_HW_DVB, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 }, - { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 }, - { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .ddr = { /* ESMT M13S128324A-5B memory */ .chip_config = 0x003, @@ -94,22 +95,22 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345 | CX18_HW_DVB, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 }, - { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 }, - { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .ddr = { /* Samsung K4D263238G-VC33 memory */ .chip_config = 0x003, @@ -141,19 +142,19 @@ static const struct cx18_card cx18_card_h900 = { .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE2 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, - CX23418_SVIDEO_LUMA3 | CX23418_SVIDEO_CHROMA4 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE1 }, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, 0 }, + CX18_AV_AUDIO8, 0 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, @@ -188,18 +189,18 @@ static const struct cx18_card cx18_card_mpc718 = { .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, 0 }, + CX18_AV_AUDIO8, 0 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index bccb67f..3c2c0b9 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -36,36 +36,6 @@ #define CX18_CARD_INPUT_COMPOSITE2 5 #define CX18_CARD_INPUT_COMPOSITE3 6 -enum cx34180_video_input { - /* Composite video inputs In1-In8 */ - CX23418_COMPOSITE1 = 1, - CX23418_COMPOSITE2, - CX23418_COMPOSITE3, - CX23418_COMPOSITE4, - CX23418_COMPOSITE5, - CX23418_COMPOSITE6, - CX23418_COMPOSITE7, - CX23418_COMPOSITE8, - - /* S-Video inputs consist of one luma input (In1-In4) ORed with one - chroma input (In5-In8) */ - CX23418_SVIDEO_LUMA1 = 0x10, - CX23418_SVIDEO_LUMA2 = 0x20, - CX23418_SVIDEO_LUMA3 = 0x30, - CX23418_SVIDEO_LUMA4 = 0x40, - CX23418_SVIDEO_CHROMA4 = 0x400, - CX23418_SVIDEO_CHROMA5 = 0x500, - CX23418_SVIDEO_CHROMA6 = 0x600, - CX23418_SVIDEO_CHROMA7 = 0x700, - CX23418_SVIDEO_CHROMA8 = 0x800, - - /* S-Video aliases for common luma/chroma combinations */ - CX23418_SVIDEO1 = 0x510, - CX23418_SVIDEO2 = 0x620, - CX23418_SVIDEO3 = 0x730, - CX23418_SVIDEO4 = 0x840, -}; - /* audio inputs */ #define CX18_CARD_INPUT_AUD_TUNER 1 #define CX18_CARD_INPUT_LINE_IN1 2 @@ -75,16 +45,6 @@ enum cx34180_video_input { #define CX18_CARD_MAX_AUDIO_INPUTS 3 #define CX18_CARD_MAX_TUNERS 2 -enum cx23418_audio_input { - /* Audio inputs: serial or In4-In8 */ - CX23418_AUDIO_SERIAL, - CX23418_AUDIO4 = 4, - CX23418_AUDIO5, - CX23418_AUDIO6, - CX23418_AUDIO7, - CX23418_AUDIO8, -}; - /* V4L2 capability aliases */ #define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ V4L2_CAP_AUDIO | V4L2_CAP_READWRITE) -- cgit v0.10.2 From 0367ca1bc7346d9ea89a4b4f1b9220489bda65a3 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 9 Jun 2008 14:58:04 -0300 Subject: V4L/DVB (8010): em28xx: Properly register extensions for already attached devices em28xx-video.c - Properly handle loading of the module when multiple devices are already connected (such as at bootup). Before we were only calling dvb_init() against the last device in the list, so while we were handling subsequent adds properly, if there were multiple devices present on driver load, everybody except the last device would not get initialized. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index fb163ec..285bc62 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1848,32 +1848,28 @@ static DEFINE_MUTEX(em28xx_extension_devlist_lock); int em28xx_register_extension(struct em28xx_ops *ops) { - struct em28xx *h, *dev = NULL; - - list_for_each_entry(h, &em28xx_devlist, devlist) - dev = h; + struct em28xx *dev = NULL; mutex_lock(&em28xx_extension_devlist_lock); list_add_tail(&ops->next, &em28xx_extension_devlist); - if (dev) - ops->init(dev); - + list_for_each_entry(dev, &em28xx_devlist, devlist) { + if (dev) + ops->init(dev); + } printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name); mutex_unlock(&em28xx_extension_devlist_lock); - return 0; } EXPORT_SYMBOL(em28xx_register_extension); void em28xx_unregister_extension(struct em28xx_ops *ops) { - struct em28xx *h, *dev = NULL; - - list_for_each_entry(h, &em28xx_devlist, devlist) - dev = h; + struct em28xx *dev = NULL; - if (dev) - ops->fini(dev); + list_for_each_entry(dev, &em28xx_devlist, devlist) { + if (dev) + ops->fini(dev); + } mutex_lock(&em28xx_extension_devlist_lock); printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); -- cgit v0.10.2 From b38cc642000f0a262db367ffb95cd02ca2ead59b Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 9 Jun 2008 14:59:05 -0300 Subject: V4L/DVB (8011): em28xx: enable DVB for HVR-900 em28xx-cards.c - DVB support is supposed to be enabled for the first generation HVR-900. This device was confirmed with DVB by mkrufky when we did the original work in April, but I guess we forgot to set the flag. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 3e4f3c7..5cf7158 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -157,6 +157,7 @@ struct em28xx_board em28xx_boards[] = { .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .mts_firmware = 1, + .has_dvb = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, -- cgit v0.10.2 From f56ebe16b045861d26b81ef6683445c0144362b8 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 28 May 2008 21:55:06 -0300 Subject: V4L/DVB (8012): gl861: sleep a little to avoid I2C errors - add little sleep to avoid I2C errors arising on faster CPUs Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 0a8ac64..10cc436 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -47,6 +47,8 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, return -EINVAL; } + msleep(0); /* avoid I2C errors */ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type, value, index, rbuf, rlen, 2000); } -- cgit v0.10.2 From ea3a13b7a19f0d7d7344494047c9aa8bb32b6678 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 28 May 2008 22:04:12 -0300 Subject: V4L/DVB (8013): gl861: remove useless identify_state - remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 10cc436..9e53650 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -94,16 +94,6 @@ static struct i2c_algorithm gl861_i2c_algo = { }; /* Callbacks for DVB USB */ -static int gl861_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - - return 0; -} - static struct zl10353_config gl861_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -174,7 +164,6 @@ static struct dvb_usb_device_properties gl861_properties = { .size_of_priv = 0, - .identify_state = gl861_identify_state, .num_adapters = 1, .adapter = {{ @@ -196,13 +185,15 @@ static struct dvb_usb_device_properties gl861_properties = { .num_device_descs = 2, .devices = { - { "MSI Mega Sky 55801 DVB-T USB2.0", - { &gl861_table[0], NULL }, - { NULL }, + { + .name = "MSI Mega Sky 55801 DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[0], NULL }, }, - { "A-LINK DTU DVB-T USB2.0", - { &gl861_table[1], NULL }, - { NULL }, + { + .name = "A-LINK DTU DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[1], NULL }, }, } }; -- cgit v0.10.2 From 1a78db826973b9fa658d72291ec2007889e2faf7 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 10 Jun 2008 11:41:58 -0300 Subject: V4L/DVB (8015): gl861: replace non critical msleep(0) with msleep(1) to be on the safe side - change msleep(0) to msleep(1) Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 9e53650..037f7ff 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -47,7 +47,7 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, return -EINVAL; } - msleep(0); /* avoid I2C errors */ + msleep(1); /* avoid I2C errors */ return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type, value, index, rbuf, rlen, 2000); -- cgit v0.10.2 From df619181631217e3166bb6c7538f981e0272617f Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 10 Jun 2008 12:34:35 -0300 Subject: V4L/DVB (8017): Ensure em28xx extensions only get run against devs that support them em28xx-audio.c em28xx-dvb.c - Em28xx extensions should ensure they are being only loaded against devices that support them. Deals with case where there are multiple em28xx devices, some of which have DVB (or ALSA) support and some do not. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 92b2a6d..343dff0 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -415,6 +415,12 @@ static int em28xx_audio_init(struct em28xx *dev) static int devnr; int ret, err; + if (dev->has_audio_class) { + /* This device does not support the extension (in this case + the device is expecting the snd-usb-audio module */ + return 0; + } + printk(KERN_INFO "em28xx-audio.c: probing for em28x1 " "non standard usbaudio\n"); printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus " @@ -458,6 +464,12 @@ static int em28xx_audio_fini(struct em28xx *dev) if (dev == NULL) return 0; + if (dev->has_audio_class) { + /* This device does not support the extension (in this case + the device is expecting the snd-usb-audio module */ + return 0; + } + if (dev->adev) { snd_card_free(dev->adev->sndcard); kfree(dev->adev); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 8cf4983..0b2333e 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -382,6 +382,11 @@ static int dvb_init(struct em28xx *dev) int result = 0; struct em28xx_dvb *dvb; + if (!dev->has_dvb) { + /* This device does not support the extension */ + return 0; + } + dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL); if (dvb == NULL) { @@ -444,6 +449,11 @@ out_free: static int dvb_fini(struct em28xx *dev) { + if (!dev->has_dvb) { + /* This device does not support the extension */ + return 0; + } + if (dev->dvb) { unregister_dvb(dev->dvb); dev->dvb = NULL; -- cgit v0.10.2 From a8a1f8cc0cae07c209f13857adbdd4b87b36cdde Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 10 Jun 2008 12:35:42 -0300 Subject: V4L/DVB (8018): Add em2860 chip ID em28xx-cards.c em28xx-reg.h - Add em2860 chip ID (seen on Pointnix Intra-Oral Camera) http://www.pointnix.com/ENG/dental/product_02.asp Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 5cf7158..8cbda43 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -525,6 +525,9 @@ void em28xx_pre_card_setup(struct em28xx *dev) rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); if (rc > 0) { switch (rc) { + case CHIP_ID_EM2860: + em28xx_info("chip ID is em2860\n"); + break; case CHIP_ID_EM2883: em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index 9058bed..fac1ab2 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -84,5 +84,6 @@ /* FIXME: Need to be populated with the other chip ID's */ enum em28xx_chip_id { + CHIP_ID_EM2860 = 34, CHIP_ID_EM2883 = 36, }; -- cgit v0.10.2 From a14fe9605bfdfe360b97acc9ef912779eb860507 Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Tue, 10 Jun 2008 14:19:31 -0300 Subject: V4L/DVB (8020): Fix callbacks functions of saa7134_empress If I try v4l2-ctl --all -d /dev/video1 or v4l2-ctl --streamon -d /dev/video1 modules crashed: *pde = 00000000 Modules linked in: ac battery loop saa7134_empress(F) saa6752hs(F) tuner_simple(F) tuner_types(F) tea5767(F) tda9887(F) tda8290(F) tea5761(F) tuner(F) snd_cmipci snd_pcm snd_page_alloc snd_opl3_lib saa7134(F) snd_mpu401 parport_pc parport snd_timer snd_hwdep snd_mpu401_uart floppy rtc psmouse videodev(F) v4l1_compat(F) compat_ioctl32(F) v4l2_common(F) videobuf_dma_sg(F) videobuf_core(F) snd_rawmidi snd_seq_device via_ircc pcspkr snd ir_kbd_i2c(F) irda soundcore ir_common(F) crc_ccitt tveeprom(F) i2c_viapro i2c_core button via_agp agpgart evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk 8139cp via82cxxx ide_core 8139too mii ehci_hcd uhci_hcd usbcore thermal processor fan EIP is at __mutex_lock_slowpath+0x29/0x7b DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process v4l2-ctl (pid: 2742, ti=ced7e000 task=cf325260 task.ti=ced7e000) d08e5411 00000000 ced7fed4 00000000 d0975acb 40045612 cfa86ee0 ffffffcd cf2b7000 ced7febc c03858d6 00000019 00000292 d089e4ec cf37b2a0 d089e4a0 Call Trace: [] mutex_lock+0xa/0xb [] videobuf_streamon+0xf/0x9a [videobuf_core] [] __video_do_ioctl+0x136a/0x2d68 [videodev] [] task_end_request+0x40/0x51 [ide_core] [] ide_intr+0x187/0x192 [ide_core] [] mntput_no_expire+0x11/0x64 [] path_walk+0x90/0x98 [] video_ioctl2+0x173/0x239 [videodev] [] filemap_fault+0x202/0x370 [] __do_fault+0x2c3/0x2fe [] handle_mm_fault+0x22a/0x49f [] vfs_ioctl+0x47/0x5d [] do_vfs_ioctl+0x245/0x258 [] sys_ioctl+0x41/0x5b [] sysenter_past_esp+0x5f/0x85 ======================= After this fix all of that commands works without problem: v4l2-ctl --all -d /dev/video1 Driver Info: Driver name : saa7134 Card type : Beholder BeholdTV M6 Extra Bus info : PCI:0000:00:0d.0 Driver version: 526 Capabilities : 0x05000001 Video Capture Read/Write Streaming Format Video Capture: Width/Height : 720/576 Pixel Format : MPEG Field : Any Bytes per Line: 0 Size Image : 58656 Colorspace : Unknown (00000000) Video input : 0 (CCIR656) Video Standard = 0x000000ff PAL-B/B1/G/H/I/D/D1/K P.S. data from /dev/video1 is not correct :(( . Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 81431ee..94b2585 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -218,8 +218,7 @@ static int empress_enum_fmt_cap(struct file *file, void *priv, static int empress_g_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; saa7134_i2c_call_clients(dev, VIDIOC_G_FMT, f); @@ -232,8 +231,7 @@ static int empress_g_fmt_cap(struct file *file, void *priv, static int empress_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; saa7134_i2c_call_clients(dev, VIDIOC_S_FMT, f); @@ -247,8 +245,7 @@ static int empress_s_fmt_cap(struct file *file, void *priv, static int empress_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_reqbufs(&dev->empress_tsq, p); } @@ -256,24 +253,21 @@ static int empress_reqbufs(struct file *file, void *priv, static int empress_querybuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_querybuf(&dev->empress_tsq, b); } static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_qbuf(&dev->empress_tsq, b); } static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_dqbuf(&dev->empress_tsq, b, file->f_flags & O_NONBLOCK); @@ -282,8 +276,7 @@ static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) static int empress_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_streamon(&dev->empress_tsq); } @@ -291,8 +284,7 @@ static int empress_streamon(struct file *file, void *priv, static int empress_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_streamoff(&dev->empress_tsq); } @@ -300,8 +292,7 @@ static int empress_streamoff(struct file *file, void *priv, static int empress_s_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; /* count == 0 is abused in saa6752hs.c, so that special case is handled here explicitly. */ @@ -320,8 +311,7 @@ static int empress_s_ext_ctrls(struct file *file, void *priv, static int empress_g_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) return -EINVAL; -- cgit v0.10.2 From 913f5fc209247b607b1994a710315966f4f9d358 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 10 Jun 2008 15:18:16 -0300 Subject: V4L/DVB (8022): saa7134: fix race between opening and closing the device decrementing dev->empress_users should be done as last action of ts_release, because it sleeps and write access to dev->empress_started is not protected in any way (additionally closing thread could mute audio after opening thread unmuted it) Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 94b2585..1c8cd0e 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -112,7 +112,6 @@ static int ts_release(struct inode *inode, struct file *file) videobuf_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); - dev->empress_users--; /* stop the encoder */ ts_reset_encoder(dev); @@ -121,6 +120,8 @@ static int ts_release(struct inode *inode, struct file *file) saa_writeb(SAA7134_AUDIO_MUTE_CTRL, saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6)); + dev->empress_users--; + return 0; } -- cgit v0.10.2 From 83ee87a31dc43a5fd6dee3562c146033c3a4cb39 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 14 Jun 2008 09:41:18 -0300 Subject: V4L/DVB (8026): Avoids an OOPS if dev struct can't be successfully recovered On some alsa versions, it seems that snd_pcm_substream_chip(substream) is returning a NULL pointer. This causes an OOPS, as reported by: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.24/+bug/212271 https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/212960 This patch avoids the OOPS by not letting and open() succeed. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index e976fc6..80c8883 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -332,6 +332,12 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; int err; + if (!chip) { + printk(KERN_ERR "BUG: cx88 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS); if (err < 0) goto _error; diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 343dff0..3c00610 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -268,6 +268,12 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) dprintk("opening device and trying to acquire exclusive lock\n"); + if (!dev) { + printk(KERN_ERR "BUG: em28xx can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + /* Sets volume, mute, etc */ dev->mute = 0; diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index ba30824..f118de6 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -613,9 +613,15 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) struct snd_pcm_runtime *runtime = substream->runtime; snd_card_saa7134_pcm_t *pcm; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); - struct saa7134_dev *dev = saa7134->dev; + struct saa7134_dev *dev; int amux, err; + if (!saa7134) { + printk(KERN_ERR "BUG: saa7134 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + dev = saa7134->dev; mutex_lock(&dev->dmasound.lock); dev->dmasound.read_count = 0; -- cgit v0.10.2 From b25fed115a8bd8d39d14ce0d03e808272a401d67 Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Fri, 13 Jun 2008 19:28:17 -0300 Subject: V4L/DVB (8027): saa7134: Avermedia A700: only s-video and composite input are working Describe exactly that only s-video and composite input are working on Avermedia A700 Signed-off-by: Matthias Schwarzott Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index b111903..21a7612 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5615,7 +5615,8 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100); printk("%s: %s: hybrid analog/dvb card\n" - "%s: Sorry, only the analog inputs are supported for now.\n", + "%s: Sorry, only analog s-video and composite input " + "are supported for now.\n", dev->name, card(dev).name, dev->name); break; } -- cgit v0.10.2 From bc36ec746409e4e4719b94a86dc0d8cbeb6f439f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 14 Jun 2008 10:44:04 -0300 Subject: V4L/DVB (8028): Improve error messages for tda1004x attach A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid firmware: DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... tda1004x: Error during firmware upload tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed Sometimes, loading/unloading this firmware makes tda1004x to return an invalid ID. However, there were no printk messages to help to identify what were the cause for the error. With this patch, it will now print: Invalid tda1004x ID = 0xff. Can't proceed saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 4997384..3993d1c 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -1248,11 +1248,14 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + u8 id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10045 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1260,7 +1263,9 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10045; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id != 0x25) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } @@ -1307,11 +1312,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + u8 id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10046 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1319,7 +1327,9 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10046; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id != 0x46) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 726f01c..653107c 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1091,7 +1091,8 @@ static int dvb_init(struct saa7134_dev *dev) ads_tech_duo_config.tuner_address); goto dettach_frontend; } - } + } else + wprintk("failed to attach tda10046\n"); break; case SAA7134_BOARD_TEVION_DVBT_220RF: if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, -- cgit v0.10.2 From 0e7830b50b20fcc25f21f79b7734102284d7c8f9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 14 Jun 2008 11:27:34 -0300 Subject: V4L/DVB (8029): Improve error message at tda1004x_attach When an error occurs at firmware loading, sometimes, tda1004x stops answering. Instead of reporting such error, attach code were assuming that the device were answering an invalid ID (0xff). This can be seen when enabling debug options: tda1004x: tda1004x_read_byte: reg=0x0 tda1004x: tda1004x_read_byte: error reg=0x0, ret=-5 Now, instead of reporting an invalid ID, it will report the correct error: tda10046: chip is not answering. Giving up. saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed A possible improvement would be trying to reset the device. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 3993d1c..a0d6386 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -1248,7 +1248,7 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; - u8 id; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); @@ -1264,6 +1264,12 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, /* check if the demod is there */ id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + if (id != 0x25) { printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); @@ -1312,7 +1318,7 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; - u8 id; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); @@ -1328,6 +1334,11 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, /* check if the demod is there */ id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } if (id != 0x46) { printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); -- cgit v0.10.2 From 44e645c20304bbe0a72cb994d9baf4b5727d7cec Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 8 Jun 2008 20:10:29 -0300 Subject: V4L/DVB (8034): tda18271: fix IF notch frequency handling The IF notch bit gets unset when we update the Main Post Div register value, before we have a chance to write the desired IF notch setting to the tuner. Move the IF notch configuration to after we update MPD. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 89c01fb..98acd58 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -45,6 +45,21 @@ static inline int charge_pump_source(struct dvb_frontend *fe, int force) TDA18271_MAIN_PLL, force); } +static inline void tda18271_set_if_notch(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x80; /* IF notch = 0 */ + break; + case TDA18271_DIGITAL: + regs[R_MPD] |= 0x80; /* IF notch = 1 */ + break; + } +} + static int tda18271_channel_configuration(struct dvb_frontend *fe, struct tda18271_std_map_item *map, u32 freq, u32 bw) @@ -66,19 +81,10 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, /* set cal mode to normal */ regs[R_EP4] &= ~0x03; - /* update IF output level & IF notch frequency */ + /* update IF output level */ regs[R_EP4] &= ~0x1c; /* clear if level bits */ regs[R_EP4] |= (map->if_lvl << 2); - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x80; /* IF notch = 0 */ - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x80; /* IF notch = 1 */ - break; - } - /* update FM_RFn */ regs[R_EP4] &= ~0x80; regs[R_EP4] |= map->fm_rfn << 7; @@ -135,6 +141,7 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, switch (priv->role) { case TDA18271_MASTER: tda18271_calc_main_pll(fe, N); + tda18271_set_if_notch(fe); tda18271_write_regs(fe, R_MPD, 4); break; case TDA18271_SLAVE: @@ -142,6 +149,7 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, tda18271_write_regs(fe, R_CPD, 4); regs[R_MPD] = regs[R_CPD] & 0x7f; + tda18271_set_if_notch(fe); tda18271_write_regs(fe, R_MPD, 1); break; } @@ -507,7 +515,7 @@ static int tda18271_powerscan_init(struct dvb_frontend *fe) /* set cal mode to normal */ regs[R_EP4] &= ~0x03; - /* update IF output level & IF notch frequency */ + /* update IF output level */ regs[R_EP4] &= ~0x1c; /* clear if level bits */ ret = tda18271_write_regs(fe, R_EP3, 2); -- cgit v0.10.2 From 119a7c7e34b5e5fa65051960ca05000a19dbce85 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 8 Jun 2008 22:12:37 -0300 Subject: V4L/DVB (8035): tda18271: dont touch EB14 if rf_cal lookup is out of range The TDA18271HD/C1 rf_cal map lookup is expected to go out of range outside of the frequency window 41 MHz - 61.1 MHz. In these cases, the internal RF tracking filters calibration mechanism is used. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index f1894fe..6fb5b45 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -649,9 +649,17 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) u8 val; int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); + /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range + * for frequencies above 61.1 MHz. In these cases, the internal RF + * tracking filters calibration mechanism is used. + * + * There is no need to warn the user about this. + */ + if (ret < 0) + goto fail; regs[R_EB14] = val; - +fail: return ret; } -- cgit v0.10.2 From 51858d13612a06494beb08616f8a93bdb2688e4c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 9 Jun 2008 02:03:31 -0300 Subject: V4L/DVB (8036): tda18271: toggle rf agc speed mode on TDA18271HD/C2 only Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 98acd58..1ebf95d 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -75,8 +75,10 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, regs[R_EP3] &= ~0x1f; /* clear std bits */ regs[R_EP3] |= (map->agc_mode << 3) | map->std; - /* set rfagc to high speed mode */ - regs[R_EP3] &= ~0x04; + if (priv->id == TDA18271HDC2) { + /* set rfagc to high speed mode */ + regs[R_EP3] &= ~0x04; + } /* set cal mode to normal */ regs[R_EP4] &= ~0x03; @@ -168,12 +170,14 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, msleep(20); - /* set rfagc to normal speed mode */ - if (map->fm_rfn) - regs[R_EP3] &= ~0x04; - else - regs[R_EP3] |= 0x04; - ret = tda18271_write_regs(fe, R_EP3, 1); + if (priv->id == TDA18271HDC2) { + /* set rfagc to normal speed mode */ + if (map->fm_rfn) + regs[R_EP3] &= ~0x04; + else + regs[R_EP3] |= 0x04; + ret = tda18271_write_regs(fe, R_EP3, 1); + } fail: return ret; } -- cgit v0.10.2 From 7ae1ac4c1db5a3647604acb00d736f17af6999b7 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 11 Jun 2008 13:52:49 -0300 Subject: V4L/DVB (8037): tda18271: ensure that the thermometer is off during channel configuration Having the thermometer on during channel configuration could cause tuning instability. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 1ebf95d..93063c6 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -103,6 +103,9 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, /* disable Power Level Indicator */ regs[R_EP1] |= 0x40; + /* make sure thermometer is off */ + regs[R_TM] &= ~0x10; + /* frequency dependent parameters */ tda18271_calc_ir_measure(fe, &freq); -- cgit v0.10.2 From 02da465945ae0a277aadf2bf37965a9e6c28f8c3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 13 Jun 2008 09:03:45 -0300 Subject: V4L/DVB (8039): pxa-camera: fix platform_get_irq() error handling. platform_get_irq() returns a negative value on error, not 0. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 7cc8e9b..5ec5bb9 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1019,12 +1019,12 @@ static int pxa_camera_probe(struct platform_device *pdev) struct pxa_camera_dev *pcdev; struct resource *res; void __iomem *base; - unsigned int irq; + int irq; int err = 0; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || irq < 0) { err = -ENODEV; goto exit; } -- cgit v0.10.2 From 3cfdc7f25b3116d57e91427caada74dd69bfbc06 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 13 Jun 2008 09:11:01 -0300 Subject: V4L/DVB (8040): soc-camera: remove soc_camera_host_class class Devices can either be class devices or bus devices, not both at the same time. Soc-camera host devices usually have a platform device as their parent. Trying to also register them with a class crashes the kernel, when linked statically. Interestingly, it works when built as a module. Thanks to Paulius Zaleckas for reporting. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index a1b9244..d015bfe 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -763,15 +763,6 @@ static struct device_driver ic_drv = { .owner = THIS_MODULE, }; -/* - * Image capture host - this is a host device, not a bus device, so, - * no bus reference, no probing. - */ -static struct class soc_camera_host_class = { - .owner = THIS_MODULE, - .name = "camera_host", -}; - static void dummy_release(struct device *dev) { } @@ -801,7 +792,6 @@ int soc_camera_host_register(struct soc_camera_host *ici) /* Number might be equal to the platform device ID */ sprintf(ici->dev.bus_id, "camera_host%d", ici->nr); - ici->dev.class = &soc_camera_host_class; mutex_lock(&list_lock); list_for_each_entry(ix, &hosts, list) { @@ -1003,14 +993,9 @@ static int __init soc_camera_init(void) ret = driver_register(&ic_drv); if (ret) goto edrvr; - ret = class_register(&soc_camera_host_class); - if (ret) - goto eclr; return 0; -eclr: - driver_unregister(&ic_drv); edrvr: bus_unregister(&soc_camera_bus_type); return ret; @@ -1018,7 +1003,6 @@ edrvr: static void __exit soc_camera_exit(void) { - class_unregister(&soc_camera_host_class); driver_unregister(&ic_drv); bus_unregister(&soc_camera_bus_type); } -- cgit v0.10.2 From 3b9408870757bd9e07fd03ac6318258f22b8dfa3 Mon Sep 17 00:00:00 2001 From: Austin Lund Date: Fri, 13 Jun 2008 11:02:43 -0300 Subject: V4L/DVB (8042): DVB-USB UMT-010 channel scan oops In the umt-010 driver the struct umt_properties sets the number of URBs for transfer to 20. But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10. Not surprisingly this causes an oops for all devices which use the umt-010 chipset when they are inserted. fix on Kaffeine channel scan for Initialize stream count using MAX_NO_URBS_FOR_DATA_STREAM. Signed-off-by: Tim Gardner Signed-off-by: maximilian attems Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c index 9e7653b..118aab1 100644 --- a/drivers/media/dvb/dvb-usb/umt-010.c +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -107,7 +107,7 @@ static struct dvb_usb_device_properties umt_properties = { /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, - .count = 20, + .count = MAX_NO_URBS_FOR_DATA_STREAM, .endpoint = 0x06, .u = { .bulk = { -- cgit v0.10.2 From 104fe9a2d2a56f25fb95800a7ab0f7600dd6879c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 13 Jun 2008 03:29:43 -0300 Subject: V4L/DVB (8043): au0828: add support for additional USB device id's Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index aaae360..86d1c8e 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -1,4 +1,4 @@ 0 -> Unknown board (au0828) - 1 -> Hauppauge HVR950Q (au0828) [2040:7200] + 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008] 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index a2a6983..898e123 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -77,8 +77,14 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) /* Make sure we support the board model */ switch (tv.model) { + case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */ case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */ + case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */ + case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; default: printk(KERN_WARNING "%s: warning: " @@ -175,6 +181,18 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 }, { USB_DEVICE(0x0fe9, 0xd620), .driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 }, + { USB_DEVICE(0x2040, 0x7210), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7217), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721b), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721f), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7280), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x0fd9, 0x0008), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { }, }; -- cgit v0.10.2 From 74d50724a02d7cdc7f7887411518ec43d0251b97 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 13 Jun 2008 20:33:23 -0300 Subject: V4L/DVB (8044): au8522: tuning optimizations If the current modulation and frequency is already set to the desired parameters, then don't re-tune. Don't store current frequency until after we've tuned successfully. Force a re-tune after resume from standby. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 084a280..978a287 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -463,10 +463,13 @@ static int au8522_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct au8522_state *state = fe->demodulator_priv; + int ret = -EINVAL; dprintk("%s(frequency=%d)\n", __func__, p->frequency); - state->current_frequency = p->frequency; + if ((state->current_frequency == p->frequency) && + (state->current_modulation == p->u.vsb.modulation)) + return 0; au8522_enable_modulation(fe, p->u.vsb.modulation); @@ -476,11 +479,16 @@ static int au8522_set_frontend(struct dvb_frontend *fe, if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - fe->ops.tuner_ops.set_params(fe, p); + ret = fe->ops.tuner_ops.set_params(fe, p); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); } + if (ret < 0) + return ret; + + state->current_frequency = p->frequency; + return 0; } @@ -498,6 +506,16 @@ static int au8522_init(struct dvb_frontend *fe) return 0; } +static int au8522_sleep(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + + state->current_frequency = 0; + + return 0; +} + static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct au8522_state *state = fe->demodulator_priv; @@ -672,6 +690,7 @@ static struct dvb_frontend_ops au8522_ops = { }, .init = au8522_init, + .sleep = au8522_sleep, .i2c_gate_ctrl = au8522_i2c_gate_ctrl, .set_frontend = au8522_set_frontend, .get_frontend = au8522_get_frontend, -- cgit v0.10.2 From 6e501a3f4a7259b1c04aa6cbdfe64376afc9f59c Mon Sep 17 00:00:00 2001 From: Tim Farrington Date: Sun, 15 Jun 2008 13:33:42 -0300 Subject: V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506 Also, adds IR table for Avermedia A16d Signed-off-by: Tim Farrington Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index a348581..8fa91f8 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2201,3 +2201,41 @@ IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE] = { [0x25] = KEY_POWER, /* power */ }; EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel); + +IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = { + [0x20] = KEY_LIST, + [0x00] = KEY_POWER, + [0x28] = KEY_1, + [0x18] = KEY_2, + [0x38] = KEY_3, + [0x24] = KEY_4, + [0x14] = KEY_5, + [0x34] = KEY_6, + [0x2c] = KEY_7, + [0x1c] = KEY_8, + [0x3c] = KEY_9, + [0x12] = KEY_SUBTITLE, + [0x22] = KEY_0, + [0x32] = KEY_REWIND, + [0x3a] = KEY_SHUFFLE, + [0x02] = KEY_PRINT, + [0x11] = KEY_CHANNELDOWN, + [0x31] = KEY_CHANNELUP, + [0x0c] = KEY_ZOOM, + [0x1e] = KEY_VOLUMEDOWN, + [0x3e] = KEY_VOLUMEUP, + [0x0a] = KEY_MUTE, + [0x04] = KEY_AUDIO, + [0x26] = KEY_RECORD, + [0x06] = KEY_PLAY, + [0x36] = KEY_STOP, + [0x16] = KEY_PAUSE, + [0x2e] = KEY_REWIND, + [0x0e] = KEY_FASTFORWARD, + [0x30] = KEY_TEXT, + [0x21] = KEY_GREEN, + [0x01] = KEY_BLUE, + [0x08] = KEY_EPG, + [0x2a] = KEY_MENU, +}; +EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 21a7612..2618cfa 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4114,11 +4114,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - /* - TODO: .mpeg = SAA7134_MPEG_DVB, - */ - .inputs = {{ .name = name_tv, .vmux = 1, @@ -4157,7 +4153,7 @@ struct saa7134_board saa7134_boards[] = { } }, .radio = { .name = name_radio, - .amux = LINE1, + .amux = TV, }, }, [SAA7134_BOARD_AVERMEDIA_M115] = { @@ -4167,6 +4163,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, .vmux = 1, @@ -5351,22 +5348,21 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev, { switch (command) { case XC2028_TUNER_RESET: - saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); - saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); - mdelay(250); - saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0); - saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0); - mdelay(250); - saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); - saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); - mdelay(250); - saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02); - saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81); - saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7); - saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03); - saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2, - 0x0001e000, 0x0001e000); - return 0; + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000); + switch (dev->board) { + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); + break; + } + return 0; } return -EINVAL; } @@ -5553,9 +5549,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000); break; case SAA7134_BOARD_AVERMEDIA_CARDBUS: - case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: case SAA7134_BOARD_AVERMEDIA_M115: - case SAA7134_BOARD_AVERMEDIA_A16D: /* power-down tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0); @@ -5565,6 +5559,18 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff); msleep(10); break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); + msleep(1); + dev->has_remote = SAA7134_REMOTE_GPIO; + break; case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: /* power-down tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004); @@ -5676,6 +5682,7 @@ static void saa7134_tuner_setup(struct saa7134_dev *dev) switch (dev->board) { case SAA7134_BOARD_AVERMEDIA_A16D: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: ctl.demod = XC3028_FE_ZARLINK456; break; default: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 653107c..341b101 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -153,12 +153,12 @@ static int mt352_aver777_init(struct dvb_frontend* fe) return 0; } -static int mt352_aver_a16d_init(struct dvb_frontend *fe) +static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) { - static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; - static u8 reset [] = { RESET, 0x80 }; - static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; - static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0xe }; static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; mt352_write(fe, clock_config, sizeof(clock_config)); @@ -167,12 +167,9 @@ static int mt352_aver_a16d_init(struct dvb_frontend *fe) mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); mt352_write(fe, agc_cfg, sizeof(agc_cfg)); mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); - return 0; } - - static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { @@ -215,14 +212,10 @@ static struct mt352_config avermedia_777 = { .demod_init = mt352_aver777_init, }; -static struct mt352_config avermedia_16d = { - .demod_address = 0xf, - .demod_init = mt352_aver_a16d_init, -}; - -static struct mt352_config avermedia_e506r_mt352_dev = { +static struct mt352_config avermedia_xc3028_mt352_dev = { .demod_address = (0x1e >> 1), .no_tuner = 1, + .demod_init = mt352_avermedia_xc3028_init, }; /* ================================================================== @@ -975,9 +968,10 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_AVERMEDIA_A16D: - dprintk("avertv A16D dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_16d, - &dev->i2c_adap); + dprintk("AverMedia A16D dvb setup\n"); + dev->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); attach_xc3028 = 1; break; case SAA7134_BOARD_MD7134: @@ -1261,11 +1255,14 @@ static int dvb_init(struct saa7134_dev *dev) goto dettach_frontend; break; case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + dprintk("AverMedia E506R dvb setup\n"); + saa7134_set_gpio(dev, 25, 0); + msleep(10); + saa7134_set_gpio(dev, 25, 1); dev->dvb.frontend = dvb_attach(mt352_attach, - &avermedia_e506r_mt352_dev, - &dev->i2c_adap); + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); attach_xc3028 = 1; - break; case SAA7134_BOARD_MD7134_BRIDGE_2: dev->dvb.frontend = dvb_attach(tda10086_attach, &sd1878_4m, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 919632b..76e6501 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -323,6 +323,15 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE1, 0x1); saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); break; + case SAA7134_BOARD_AVERMEDIA_A16D: + ir_codes = ir_codes_avermedia_a16d; + mask_keycode = 0x02F200; + mask_keydown = 0x000400; + polling = 50; /* ms */ + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; case SAA7134_BOARD_KWORLD_TERMINATOR: ir_codes = ir_codes_pixelview; mask_keycode = 0x00001f; diff --git a/include/media/ir-common.h b/include/media/ir-common.h index bfee8be..b8e8aa9 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -146,6 +146,7 @@ extern IR_KEYTAB_TYPE ir_codes_behold_columbus[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; #endif -- cgit v0.10.2 From beb31e636501f39e853ac5d0ffd3fbb910d19d5c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 17 Jun 2008 17:37:51 -0300 Subject: V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISE The automatic Kconfig selection for tuners and frontends should be conditional, based on !DVB_FE_CUSTOMISE. This patch corrects the selection for VIDEO_CX18 on MEDIA_TUNER_MXL5005S and DVB_S5H1409 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig index 5f94269..9aefdc5 100644 --- a/drivers/media/video/cx18/Kconfig +++ b/drivers/media/video/cx18/Kconfig @@ -10,8 +10,8 @@ config VIDEO_CX18 select VIDEO_TVEEPROM select VIDEO_CX2341X select VIDEO_CS5345 - select DVB_S5H1409 - select MEDIA_TUNER_MXL5005S + select DVB_S5H1409 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE ---help--- This is a video4linux driver for Conexant cx23418 based PCI combo video recorder devices. -- cgit v0.10.2 From 527629fb7c35ad93389ab132823d19139dd88e70 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 14 Jun 2008 03:58:08 -0300 Subject: V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-core Change the cx18-av-core code so that accesses to cx23418 av core that cause auto-configuration will be adjusted to emulate the auto-configuration behavior of the cx25843. This fixes the VBI displayed as video at the top of the frame for NTSC and probably other things. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 8f2959a..faca43e 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -69,6 +69,58 @@ int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask, or_value); } +int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, int no_acfg_mask) +{ + int retval; + u32 saved_reg[8] = {0}; + + if (no_acfg_mask & CXADEC_NO_ACFG_AFE) { + saved_reg[0] = cx18_av_read4(cx, CXADEC_CHIP_CTRL); + saved_reg[1] = cx18_av_read4(cx, CXADEC_AFE_CTRL); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_PLL) { + saved_reg[2] = cx18_av_read4(cx, CXADEC_PLL_CTRL1); + saved_reg[3] = cx18_av_read4(cx, CXADEC_VID_PLL_FRAC); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_VID) { + saved_reg[4] = cx18_av_read4(cx, CXADEC_HORIZ_TIM_CTRL); + saved_reg[5] = cx18_av_read4(cx, CXADEC_VERT_TIM_CTRL); + saved_reg[6] = cx18_av_read4(cx, CXADEC_SRC_COMB_CFG); + saved_reg[7] = cx18_av_read4(cx, CXADEC_CHROMA_VBIOFF_CFG); + } + + retval = cx18_av_write(cx, addr, value); + + if (no_acfg_mask & CXADEC_NO_ACFG_AFE) { + cx18_av_write4(cx, CXADEC_CHIP_CTRL, saved_reg[0]); + cx18_av_write4(cx, CXADEC_AFE_CTRL, saved_reg[1]); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_PLL) { + cx18_av_write4(cx, CXADEC_PLL_CTRL1, saved_reg[2]); + cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, saved_reg[3]); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_VID) { + cx18_av_write4(cx, CXADEC_HORIZ_TIM_CTRL, saved_reg[4]); + cx18_av_write4(cx, CXADEC_VERT_TIM_CTRL, saved_reg[5]); + cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, saved_reg[6]); + cx18_av_write4(cx, CXADEC_CHROMA_VBIOFF_CFG, saved_reg[7]); + } + + return retval; +} + +int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned and_mask, + u8 or_value, int no_acfg_mask) +{ + return cx18_av_write_no_acfg(cx, addr, + (cx18_av_read(cx, addr) & and_mask) | + or_value, no_acfg_mask); +} + /* ----------------------------------------------------------------------- */ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, @@ -170,13 +222,15 @@ static void input_change(struct cx18 *cx) /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */ if (std & V4L2_STD_SECAM) - cx18_av_write(cx, 0x402, 0); + cx18_av_write_no_acfg(cx, 0x402, 0, CXADEC_NO_ACFG_ALL); else { - cx18_av_write(cx, 0x402, 0x04); + cx18_av_write_no_acfg(cx, 0x402, 0x04, CXADEC_NO_ACFG_ALL); cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); } - cx18_av_and_or(cx, 0x401, ~0x60, 0); - cx18_av_and_or(cx, 0x401, ~0x60, 0x60); + cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); + cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0x60, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); if (std & V4L2_STD_525_60) { if (std == V4L2_STD_NTSC_M_JP) { @@ -262,7 +316,8 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, cx18_av_write(cx, 0x103, reg); /* Set INPUT_MODE to Composite (0) or S-Video (1) */ - cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02); + cx18_av_and_or_no_acfg(cx, 0x401, ~0x6, is_composite ? 0 : 0x02, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ @@ -318,12 +373,12 @@ static int set_v4lstd(struct cx18 *cx) This happens for example with the Yuan MPC622. */ if (fmt >= 4 && fmt < 8) { /* Set format to NTSC-M */ - cx18_av_and_or(cx, 0x400, ~0xf, 1); + cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, 1, CXADEC_NO_ACFG_AFE); /* Turn off LCOMB */ cx18_av_and_or(cx, 0x47b, ~6, 0); } - cx18_av_and_or(cx, 0x400, ~0xf, fmt); - cx18_av_and_or(cx, 0x403, ~0x3, pal_m); + cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, fmt, CXADEC_NO_ACFG_AFE); + cx18_av_and_or_no_acfg(cx, 0x403, ~0x3, pal_m, CXADEC_NO_ACFG_ALL); cx18_av_vbi_setup(cx); input_change(cx); return 0; diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 39f3c93..c172823 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -295,14 +295,24 @@ struct cx18_av_state { #define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */ #define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */ +/* Flags on what to preserve on write to 0x400-0x403 with cx18_av_.*_no_acfg()*/ +#define CXADEC_NO_ACFG_AFE 0x01 /* Preserve 0x100-0x107 */ +#define CXADEC_NO_ACFG_PLL 0x02 /* Preserve 0x108-0x10f */ +#define CXADEC_NO_ACFG_VID 0x04 /* Preserve 0x470-0x47f */ +#define CXADEC_NO_ACFG_ALL 0x07 + /* ----------------------------------------------------------------------- */ /* cx18_av-core.c */ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, + int no_acfg_mask); u8 cx18_av_read(struct cx18 *cx, u16 addr); u32 cx18_av_read4(struct cx18 *cx, u16 addr); int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value); int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value); +int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned mask, u8 value, + int no_acfg_mask); int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg); /* ----------------------------------------------------------------------- */ -- cgit v0.10.2 From 46195b555aa3edd265b4e765e4edff59b253b55e Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Thu, 19 Jun 2008 23:17:05 -0300 Subject: V4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 and FM radio Fix the cx18-cards.c structures for the HVR-1600 to reflect that audio Line In 2 and FM radio audio go to AIN3 and AIN4 of the CS5345 mux respectively. Verified by physical inspection of an HVR-1600MCE, by listening to FM broadcasts with the HVR-1600MCE, and by comparing with the card definition for a PVR-150 in ivtv. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c35eb53..c18865b 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -67,10 +67,10 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, .ddr = { /* ESMT M13S128324A-5B memory */ .chip_config = 0x003, @@ -107,10 +107,10 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, .ddr = { /* Samsung K4D263238G-VC33 memory */ .chip_config = 0x003, -- cgit v0.10.2 From 08cf7b2ed172cc83f3d2f44b712b3d54e6cc4ae6 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 22 Jun 2008 00:04:21 -0300 Subject: V4L/DVB (8067): cx18: Fix firmware load for case when digital capture happens first This is a fix for the case when a digital capture from dvr0 happens first after modprobe, before access to any cx18 v4l2 device nodes. The initial dvb feed start has been changed to load the firmware if not already loaded. Also fixed a use counter to correct dvb feed accounting if starting the transport DMA fails. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index c974417..cae3898 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -69,11 +69,21 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) struct dvb_demux *demux = feed->demux; struct cx18_stream *stream = (struct cx18_stream *) demux->priv; struct cx18 *cx = stream->cx; - int ret = -EINVAL; + int ret; u32 v; CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n", feed->pid, feed->index); + + mutex_lock(&cx->serialize_lock); + ret = cx18_init_on_first_open(cx); + mutex_unlock(&cx->serialize_lock); + if (ret) { + CX18_ERR("Failed to initialize firmware starting DVB feed\n"); + return ret; + } + ret = -EINVAL; + switch (cx->card->type) { case CX18_CARD_HVR_1600_ESMT: case CX18_CARD_HVR_1600_SAMSUNG: @@ -101,6 +111,11 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) if (stream->dvb.feeding++ == 0) { CX18_DEBUG_INFO("Starting Transport DMA\n"); ret = cx18_start_v4l2_encode_stream(stream); + if (ret < 0) { + CX18_DEBUG_INFO( + "Failed to start Transport DMA\n"); + stream->dvb.feeding--; + } } else ret = 0; mutex_unlock(&stream->dvb.feedlock); -- cgit v0.10.2 From 1f09e8a25c9aaa4066b4593c1bf99a4cbcc38120 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 22 Jun 2008 01:27:00 -0300 Subject: V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initialization cx18: Add I2C slave reset via GPIO upon initialization. One user, Michael , has reported this allows his HVR-1600 EEPROM to be consistently recognized when using (long,) 100 msec delays. The delays in this commit are nominal (10 & 40 msec) and need testing/tuning on boards with I2C problems to find the right values. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c18865b..bbf23fa4 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -82,6 +82,11 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { }, .gpio_init.initial_value = 0x3001, .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + }, .i2c = &cx18_i2c_std, }; @@ -122,6 +127,11 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { }, .gpio_init.initial_value = 0x3001, .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + }, .i2c = &cx18_i2c_std, }; diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index 3c2c0b9..dc2dd94 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -78,6 +78,13 @@ struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */ u32 initial_value; }; +struct cx18_gpio_i2c_slave_reset { + u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */ + u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */ + int msecs_asserted; /* time period reset must remain asserted */ + int msecs_recovery; /* time after deassert for chips to be ready */ +}; + struct cx18_card_tuner { v4l2_std_id std; /* standard for which the tuner is suitable */ int tuner; /* tuner ID (from tuner.h) */ @@ -114,7 +121,8 @@ struct cx18_card { /* GPIO card-specific settings */ u8 xceive_pin; /* XCeive tuner GPIO reset pin */ - struct cx18_gpio_init gpio_init; + struct cx18_gpio_init gpio_init; + struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset; struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS]; struct cx18_card_tuner_i2c *i2c; diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index ceb6365..b302833 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -53,10 +53,34 @@ static void gpio_write(struct cx18 *cx) write_reg(((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), + write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } +void cx18_reset_i2c_slaves_gpio(struct cx18 *cx) +{ + const struct cx18_gpio_i2c_slave_reset *p; + + p = &cx->card->gpio_i2c_slave_reset; + + if ((p->active_lo_mask | p->active_hi_mask) == 0) + return; + + /* Assuming that the masks are a subset of the bits in gpio_dir */ + + /* Assert */ + cx->gpio_val = + (cx->gpio_val | p->active_hi_mask) & ~(p->active_lo_mask); + gpio_write(cx); + schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_asserted)); + + /* Deassert */ + cx->gpio_val = + (cx->gpio_val | p->active_lo_mask) & ~(p->active_hi_mask); + gpio_write(cx); + schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_recovery)); +} + void cx18_gpio_init(struct cx18 *cx) { cx->gpio_dir = cx->card->gpio_init.direction; diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h index 41bac88..525c328 100644 --- a/drivers/media/video/cx18/cx18-gpio.h +++ b/drivers/media/video/cx18/cx18-gpio.h @@ -21,4 +21,5 @@ */ void cx18_gpio_init(struct cx18 *cx); +void cx18_reset_i2c_slaves_gpio(struct cx18 *cx); int cx18_reset_tuner_gpio(void *dev, int cmd, int value); diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index 1d6c51a..680bc4e 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -405,6 +405,8 @@ int init_cx18_i2c(struct cx18 *cx) cx18_setscl(&cx->i2c_algo_cb_data[1], 1); cx18_setsda(&cx->i2c_algo_cb_data[1], 1); + cx18_reset_i2c_slaves_gpio(cx); + return i2c_bit_add_bus(&cx->i2c_adap[0]) || i2c_bit_add_bus(&cx->i2c_adap[1]); } -- cgit v0.10.2 From ad907fa39517ca35b46912fbfe2b77cd89e1d56a Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 22 Jun 2008 02:00:09 -0300 Subject: V4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 and enable card entry cx18: Fix S-Video and Compsite input settings for the Yuan MPC718 per user reports from Yuri Warczynski and Brian Hope and enable the card entry. The tuner reset GPIO pin is likely incorrect as the tuner firmware cannot be reloaded without a reboot. It is likely the audio routing is done via GPIO which is not implemented yet, as users report audio doesn't work for some inputs. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index bbf23fa4..c26e0ef 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -194,23 +194,26 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = { static const struct cx18_card cx18_card_mpc718 = { .type = CX18_CARD_YUAN_MPC718, .name = "Yuan MPC718", - .comment = "Not yet supported!\n", - .v4l2_capabilities = 0, + .comment = "Some Composite and S-Video inputs are currently working.\n", + .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + { CX18_CARD_INPUT_SVIDEO2, 2, + CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, + { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { - { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO8, 0 }, - { CX18_CARD_INPUT_LINE_IN1, - CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, 0 }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, -- cgit v0.10.2 From c9fa2b1eee9d10c2455d3cd148cf13b34d91bdef Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 22:45:55 -0300 Subject: V4L/DVB (8071): tda10023: Fix possible kernel oops during initialisation If the i2c write fails during initialisation, an oops happens because state->frontend.dvb is still undefined. Fixed. Thanks to Sigmund Augdal for reporting this bug, and to Hartmut Birr for suggesting the fix. Thanks-to: Sigmund Augdal Thanks-to: Hartmut Birr Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb/frontends/tda10023.c index 0727b80..c6ff5b8 100644 --- a/drivers/media/dvb/frontends/tda10023.c +++ b/drivers/media/dvb/frontends/tda10023.c @@ -116,9 +116,12 @@ static u8 tda10023_readreg (struct tda10023_state* state, u8 reg) int ret; ret = i2c_transfer (state->i2c, msg, 2); - if (ret != 2) - printk("DVB: TDA10023: %s: readreg error (ret == %i)\n", - __func__, ret); + if (ret != 2) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error " + "(reg == 0x%02x, ret == %i)\n", + num, __func__, reg, ret); + } return b1[0]; } @@ -129,11 +132,12 @@ static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data) int ret; ret = i2c_transfer (state->i2c, &msg, 1); - if (ret != 1) - printk("DVB: TDA10023(%d): %s, writereg error " + if (ret != 1) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error " "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", - state->frontend.dvb->num, __func__, reg, data, ret); - + num, __func__, reg, data, ret); + } return (ret != 1) ? -EREMOTEIO : 0; } @@ -464,7 +468,7 @@ struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, int i; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ -- cgit v0.10.2 From edabaffc7e7fccdeadac6273704102adc2b604ae Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 23:04:27 -0300 Subject: V4L/DVB (8073): av7110: Catch another type of ARM crash Catch another type of ARM crash. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index 9d81074..c99936c 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -427,6 +427,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) if (err) { printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n", __func__, type); + av7110->arm_errors++; return -ETIMEDOUT; } msleep(1); -- cgit v0.10.2 From 0b915e74ac10b65da930aa430837d4338f5deb65 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 23:10:14 -0300 Subject: V4L/DVB (8074): av7110: OSD transfers should not be interrupted OSD transfers should not be interrupted. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index c99936c..3a3f527 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -854,10 +854,8 @@ static osd_raw_window_t bpp2bit[8] = { static inline int WaitUntilBmpLoaded(struct av7110 *av7110) { - int ret = wait_event_interruptible_timeout(av7110->bmpq, + int ret = wait_event_timeout(av7110->bmpq, av7110->bmp_state != BMP_LOADING, 10*HZ); - if (ret == -ERESTARTSYS) - return ret; if (ret == 0) { printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n", ret, av7110->bmp_state); -- cgit v0.10.2 From 7876ad75b1a3b7dc3d5d765d0be086d89fd2e663 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 23:25:04 -0300 Subject: V4L/DVB (8075): stv0299: Uncorrected block count and bit error rate fixed Fix uncorrected block counter and bit error rate to follow DVB API spec: - Unsupported controls return -ENOSYS. - UNC must never be set to 0. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 1755618..35435be 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -63,6 +63,7 @@ struct stv0299_state { u32 symbol_rate; fe_code_rate_t fec_inner; int errmode; + u32 ucblocks; }; #define STATUS_BER 0 @@ -501,8 +502,10 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) { struct stv0299_state* state = fe->demodulator_priv; - if (state->errmode != STATUS_BER) return 0; - *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); + if (state->errmode != STATUS_BER) + return -ENOSYS; + + *ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8); return 0; } @@ -540,8 +543,12 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { struct stv0299_state* state = fe->demodulator_priv; - if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0; - else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); + if (state->errmode != STATUS_UCBLOCKS) + return -ENOSYS; + + state->ucblocks += stv0299_readreg(state, 0x1e); + state->ucblocks += (stv0299_readreg(state, 0x1d) << 8); + *ucblocks = state->ucblocks; return 0; } -- cgit v0.10.2 From 7fa8e6fa1519194fc0c931f40d530fb55137bad9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 21 Jun 2008 13:23:27 -0300 Subject: V4L/DVB (8092): videodev: simplify and fix standard enumeration VIDIOC_ENUMSTD did not return all the PAL/SECAM/NTSC variants: it just returned one single PAL/SECAM/NTSC standard without separate entries for the trickier standards like NTSC-JP. Changed the code so that it behaves better. Also simplified the if/switch statements into a common standards lookup table. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 31e8af0..67a661c 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -51,12 +51,51 @@ #define VIDEO_NUM_DEVICES 256 #define VIDEO_NAME "video4linux" +struct std_descr { + v4l2_std_id std; + const char *descr; +}; + +static const struct std_descr standards[] = { + { V4L2_STD_NTSC, "NTSC" }, + { V4L2_STD_NTSC_M, "NTSC-M" }, + { V4L2_STD_NTSC_M_JP, "NTSC-M-JP" }, + { V4L2_STD_NTSC_M_KR, "NTSC-M-KR" }, + { V4L2_STD_NTSC_443, "NTSC-443" }, + { V4L2_STD_PAL, "PAL" }, + { V4L2_STD_PAL_BG, "PAL-BG" }, + { V4L2_STD_PAL_B, "PAL-B" }, + { V4L2_STD_PAL_B1, "PAL-B1" }, + { V4L2_STD_PAL_G, "PAL-G" }, + { V4L2_STD_PAL_H, "PAL-H" }, + { V4L2_STD_PAL_I, "PAL-I" }, + { V4L2_STD_PAL_DK, "PAL-DK" }, + { V4L2_STD_PAL_D, "PAL-D" }, + { V4L2_STD_PAL_D1, "PAL-D1" }, + { V4L2_STD_PAL_K, "PAL-K" }, + { V4L2_STD_PAL_M, "PAL-M" }, + { V4L2_STD_PAL_N, "PAL-N" }, + { V4L2_STD_PAL_Nc, "PAL-Nc" }, + { V4L2_STD_PAL_60, "PAL-60" }, + { V4L2_STD_SECAM, "SECAM" }, + { V4L2_STD_SECAM_B, "SECAM-B" }, + { V4L2_STD_SECAM_G, "SECAM-G" }, + { V4L2_STD_SECAM_H, "SECAM-H" }, + { V4L2_STD_SECAM_DK, "SECAM-DK" }, + { V4L2_STD_SECAM_D, "SECAM-D" }, + { V4L2_STD_SECAM_K, "SECAM-K" }, + { V4L2_STD_SECAM_K1, "SECAM-K1" }, + { V4L2_STD_SECAM_L, "SECAM-L" }, + { V4L2_STD_SECAM_LC, "SECAM-Lc" }, + { 0, "Unknown" } +}; + /* video4linux standard ID conversion to standard name */ -char *v4l2_norm_to_name(v4l2_std_id id) +const char *v4l2_norm_to_name(v4l2_std_id id) { - char *name; u32 myid = id; + int i; /* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle 64 bit comparations. So, on that architecture, with some gcc @@ -64,110 +103,17 @@ char *v4l2_norm_to_name(v4l2_std_id id) */ BUG_ON(myid != id); - switch (myid) { - case V4L2_STD_PAL: - name = "PAL"; - break; - case V4L2_STD_PAL_BG: - name = "PAL-BG"; - break; - case V4L2_STD_PAL_DK: - name = "PAL-DK"; - break; - case V4L2_STD_PAL_B: - name = "PAL-B"; - break; - case V4L2_STD_PAL_B1: - name = "PAL-B1"; - break; - case V4L2_STD_PAL_G: - name = "PAL-G"; - break; - case V4L2_STD_PAL_H: - name = "PAL-H"; - break; - case V4L2_STD_PAL_I: - name = "PAL-I"; - break; - case V4L2_STD_PAL_D: - name = "PAL-D"; - break; - case V4L2_STD_PAL_D1: - name = "PAL-D1"; - break; - case V4L2_STD_PAL_K: - name = "PAL-K"; - break; - case V4L2_STD_PAL_M: - name = "PAL-M"; - break; - case V4L2_STD_PAL_N: - name = "PAL-N"; - break; - case V4L2_STD_PAL_Nc: - name = "PAL-Nc"; - break; - case V4L2_STD_PAL_60: - name = "PAL-60"; - break; - case V4L2_STD_NTSC: - name = "NTSC"; - break; - case V4L2_STD_NTSC_M: - name = "NTSC-M"; - break; - case V4L2_STD_NTSC_M_JP: - name = "NTSC-M-JP"; - break; - case V4L2_STD_NTSC_443: - name = "NTSC-443"; - break; - case V4L2_STD_NTSC_M_KR: - name = "NTSC-M-KR"; - break; - case V4L2_STD_SECAM: - name = "SECAM"; - break; - case V4L2_STD_SECAM_DK: - name = "SECAM-DK"; - break; - case V4L2_STD_SECAM_B: - name = "SECAM-B"; - break; - case V4L2_STD_SECAM_D: - name = "SECAM-D"; - break; - case V4L2_STD_SECAM_G: - name = "SECAM-G"; - break; - case V4L2_STD_SECAM_H: - name = "SECAM-H"; - break; - case V4L2_STD_SECAM_K: - name = "SECAM-K"; - break; - case V4L2_STD_SECAM_K1: - name = "SECAM-K1"; - break; - case V4L2_STD_SECAM_L: - name = "SECAM-L"; - break; - case V4L2_STD_SECAM_LC: - name = "SECAM-LC"; - break; - default: - name = "Unknown"; - break; - } - - return name; + for (i = 0; standards[i].std; i++) + if (myid == standards[i].std) + break; + return standards[i].descr; } EXPORT_SYMBOL(v4l2_norm_to_name); /* Fill in the fields of a v4l2_standard structure according to the 'id' and 'transmission' parameters. Returns negative on error. */ int v4l2_video_std_construct(struct v4l2_standard *vs, - int id, char *name) + int id, const char *name) { u32 index = vs->index; @@ -1218,95 +1164,40 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_ENUMSTD: { struct v4l2_standard *p = arg; - v4l2_std_id id = vfd->tvnorms,curr_id=0; - unsigned int index = p->index,i; - - if (index<0) { - ret=-EINVAL; - break; - } - - /* Return norm array on a canonical way */ - for (i=0;i<= index && id; i++) { - if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) { - curr_id = V4L2_STD_PAL; - } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) { - curr_id = V4L2_STD_PAL_BG; - } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) { - curr_id = V4L2_STD_PAL_DK; - } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) { - curr_id = V4L2_STD_PAL_B; - } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) { - curr_id = V4L2_STD_PAL_B1; - } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) { - curr_id = V4L2_STD_PAL_G; - } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) { - curr_id = V4L2_STD_PAL_H; - } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) { - curr_id = V4L2_STD_PAL_I; - } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) { - curr_id = V4L2_STD_PAL_D; - } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) { - curr_id = V4L2_STD_PAL_D1; - } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) { - curr_id = V4L2_STD_PAL_K; - } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) { - curr_id = V4L2_STD_PAL_M; - } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) { - curr_id = V4L2_STD_PAL_N; - } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) { - curr_id = V4L2_STD_PAL_Nc; - } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) { - curr_id = V4L2_STD_PAL_60; - } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) { - curr_id = V4L2_STD_NTSC; - } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) { - curr_id = V4L2_STD_NTSC_M; - } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) { - curr_id = V4L2_STD_NTSC_M_JP; - } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) { - curr_id = V4L2_STD_NTSC_443; - } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) { - curr_id = V4L2_STD_NTSC_M_KR; - } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) { - curr_id = V4L2_STD_SECAM; - } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) { - curr_id = V4L2_STD_SECAM_DK; - } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) { - curr_id = V4L2_STD_SECAM_B; - } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) { - curr_id = V4L2_STD_SECAM_D; - } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) { - curr_id = V4L2_STD_SECAM_G; - } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) { - curr_id = V4L2_STD_SECAM_H; - } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) { - curr_id = V4L2_STD_SECAM_K; - } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) { - curr_id = V4L2_STD_SECAM_K1; - } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) { - curr_id = V4L2_STD_SECAM_L; - } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) { - curr_id = V4L2_STD_SECAM_LC; - } else { + v4l2_std_id id = vfd->tvnorms, curr_id = 0; + unsigned int index = p->index, i, j = 0; + const char *descr = ""; + + /* Return norm array in a canonical way */ + for (i = 0; i <= index && id; i++) { + /* last std value in the standards array is 0, so this + while always ends there since (id & 0) == 0. */ + while ((id & standards[j].std) != standards[j].std) + j++; + curr_id = standards[j].std; + descr = standards[j].descr; + j++; + if (curr_id == 0) break; - } - id &= ~curr_id; + if (curr_id != V4L2_STD_PAL && + curr_id != V4L2_STD_SECAM && + curr_id != V4L2_STD_NTSC) + id &= ~curr_id; } - if (i<=index) + if (i <= index) return -EINVAL; - v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id)); + v4l2_video_std_construct(p, curr_id, descr); p->index = index; - dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, " + dbgarg(cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, " "framelines=%d\n", p->index, (unsigned long long)p->id, p->name, p->frameperiod.numerator, p->frameperiod.denominator, p->framelines); - ret=0; + ret = 0; break; } case VIDIOC_G_STD: diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 33f01ae..859f7a6 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -40,9 +40,9 @@ #define VFL_TYPE_VTX 3 /* Video standard functions */ -extern char *v4l2_norm_to_name(v4l2_std_id id); +extern const char *v4l2_norm_to_name(v4l2_std_id id); extern int v4l2_video_std_construct(struct v4l2_standard *vs, - int id, char *name); + int id, const char *name); /* Prints the ioctl in a human-readable format */ extern void v4l_printk_ioctl(unsigned int cmd); -- cgit v0.10.2 From 836c28584d4629fdc85365f083b84e1298e14312 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 21 Jun 2008 19:32:41 -0300 Subject: V4L/DVB (8096): au8522: prevent false-positive lock status This decreases scan time in Queens, New York from 28 minutes to 7 minutes, with the exact same services found. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 978a287..03900d2 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -527,10 +527,8 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) if (state->current_modulation == VSB_8) { dprintk("%s() Checking VSB_8\n", __func__); reg = au8522_readreg(state, 0x4088); - if (reg & 0x01) - *status |= FE_HAS_VITERBI; - if (reg & 0x02) - *status |= FE_HAS_LOCK | FE_HAS_SYNC; + if ((reg & 0x03) == 0x03) + *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI; } else { dprintk("%s() Checking QAM\n", __func__); reg = au8522_readreg(state, 0x4541); -- cgit v0.10.2 From e470d8177ed6ae56f4310ce793a57bcb2fed1749 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 21 Jun 2008 21:06:02 -0300 Subject: V4L/DVB (8097): xc5000: check device hardware state to determine if firmware download is needed This patch ensures that the xc5000 will have firmware loaded as needed if the part is powered down or reset via gpio from the host. An example of this, in some cases, could be after the system resumes from standby or hibernate modes. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index ceae6db..7cf4f5b 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -177,6 +177,7 @@ static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"FM Radio-INPUT1", 0x0208, 0x9002} }; +static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len); static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len); static void xc5000_TunerReset(struct dvb_frontend *fe); @@ -352,7 +353,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, static int xc_shutdown(struct xc5000_priv *priv) { - return 0; + return XC_RESULT_SUCCESS; /* Fixme: cannot bring tuner back alive once shutdown * without reloading the driver modules. * return xc_write_reg(priv, XREG_POWER_DOWN, 0); @@ -685,6 +686,25 @@ static int xc5000_set_params(struct dvb_frontend *fe, return 0; } +static int xc5000_is_firmware_loaded(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + u16 id; + + ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id); + if (ret == XC_RESULT_SUCCESS) { + if (id == XC_PRODUCT_ID_FW_NOT_LOADED) + ret = XC_RESULT_RESET_FAILURE; + else + ret = XC_RESULT_SUCCESS; + } + + dprintk(1, "%s() returns %s id = 0x%x\n", __func__, + ret == XC_RESULT_SUCCESS ? "True" : "False", id); + return ret; +} + static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); static int xc5000_set_analog_params(struct dvb_frontend *fe, @@ -693,7 +713,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, struct xc5000_priv *priv = fe->tuner_priv; int ret; - if(priv->fwloaded == 0) + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) xc_load_fw_and_init_tuner(fe); dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", @@ -808,11 +828,10 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; int ret = 0; - if (priv->fwloaded == 0) { + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { ret = xc5000_fwupload(fe); if (ret != XC_RESULT_SUCCESS) return ret; - priv->fwloaded = 1; } /* Start the tuner self-calibration process */ @@ -852,7 +871,6 @@ static int xc5000_sleep(struct dvb_frontend *fe) return -EREMOTEIO; } else { - /* priv->fwloaded = 0; */ return XC_RESULT_SUCCESS; } } @@ -933,7 +951,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, cfg->i2c_address); printk(KERN_INFO "xc5000: Firmware has been loaded previously\n"); - priv->fwloaded = 1; break; case XC_PRODUCT_ID_FW_NOT_LOADED: printk(KERN_INFO @@ -941,7 +958,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, cfg->i2c_address); printk(KERN_INFO "xc5000: Firmware has not been loaded previously\n"); - priv->fwloaded = 0; break; default: printk(KERN_ERR diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h index ecebfe4..a72a988 100644 --- a/drivers/media/common/tuners/xc5000_priv.h +++ b/drivers/media/common/tuners/xc5000_priv.h @@ -30,7 +30,6 @@ struct xc5000_priv { u32 bandwidth; u8 video_standard; u8 rf_mode; - u8 fwloaded; void *devptr; }; -- cgit v0.10.2 From 5c554e6b984ce6b36488b93a7ec8e2752233e7cb Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 22 Jun 2008 09:11:40 -0300 Subject: V4L/DVB (8100): V4L/vivi: fix possible memory leak in vivi_fillbuff MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move allocation after first check and fix memory leak. Noticed-by: Daniel Marjamäki Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 845be18..5ff9a58 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -327,13 +327,14 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) int hmax = buf->vb.height; int wmax = buf->vb.width; struct timeval ts; - char *tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC); + char *tmpbuf; void *vbuf = videobuf_to_vmalloc(&buf->vb); - if (!tmpbuf) + if (!vbuf) return; - if (!vbuf) + tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC); + if (!tmpbuf) return; for (h = 0; h < hmax; h++) { -- cgit v0.10.2 From a17898737eaed4ef41f273da7b830c632e06613e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 22 Jun 2008 17:03:02 -0300 Subject: V4L/DVB (8108): Fix open/close race in saa7134 The saa7134 driver uses a (non-atomic) variable in an attempt to only allow one opener of the device (how it deals with sending the fd over unix sockets I don't know). Unfortunately, the release function first decrements this variable, and THEN goes on to disable more of the device. This allows for a race where another opener of the device comes in after the decrement of the variable, configures the hardware just to then see the hardware be disabled by the rest of the release function. This patch makes the release function use the same lock as the open function to protect the hardware as well as the variable (which now at least has some locking to protect it). Signed-off-by: Arjan van de Ven Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 1c8cd0e..3ae71a3 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -110,6 +110,8 @@ static int ts_release(struct inode *inode, struct file *file) { struct saa7134_dev *dev = file->private_data; + mutex_lock(&dev->empress_tsq.vb_lock); + videobuf_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); @@ -122,6 +124,8 @@ static int ts_release(struct inode *inode, struct file *file) dev->empress_users--; + mutex_unlock(&dev->empress_tsq.vb_lock); + return 0; } -- cgit v0.10.2 From 0e3e2eabf4fbc0162e1f1eb4fd90cb3e9513a554 Mon Sep 17 00:00:00 2001 From: Richard Sharpe Date: Tue, 24 Jun 2008 19:11:13 -0700 Subject: firewire: fw-sbp2: fix parsing of logical unit directories MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a small off-by-one bug in firewire-sbp2. This causes problems when a device exports multiple LUN Directories. I found it when trying to talk to a SONY DVD Jukebox. Signed-off-by: Richard Sharpe Acked-by: Kristian Høgsberg Signed-off-by: Stefan Richter (op. order, changelog) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index b2458bb..227d2e0 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1051,7 +1051,8 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory, break; case SBP2_CSR_LOGICAL_UNIT_DIRECTORY: - if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0) + /* Adjust for the increment in the iterator */ + if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0) return -ENOMEM; break; } -- cgit v0.10.2 From b660398101cd0622325480a67ac88bb4d33d553a Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 27 Jun 2008 14:39:42 +0100 Subject: kbuild: fix a.out.h export to userspace with O= build. We need to check for existence of the a.out.h header in the source tree, not the object tree, if we want it to get the right answer with O=. Signed-off-by: David Woodhouse Signed-off-by: Sam Ravnborg diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm index 92a6d91..7cd25b8 100644 --- a/include/asm-generic/Kbuild.asm +++ b/include/asm-generic/Kbuild.asm @@ -1,6 +1,6 @@ header-y += kvm.h -ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += auxvec.h diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 7381916..bca352e 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -1,6 +1,5 @@ include include/asm-generic/Kbuild.asm -header-y += a.out.h header-y += auxvec.h header-y += ioctls.h header-y += mman.h diff --git a/include/linux/Kbuild b/include/linux/Kbuild index b6fbb25..71d70d1 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -166,7 +166,7 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h -ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += apm_bios.h -- cgit v0.10.2 From 8c2e870a625bd336b2e7a65a97c1836acef07322 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:30:52 +1000 Subject: Ensure interrupted recovery completed properly (v1 metadata plus bitmap) If, while assembling an array, we find a device which is not fully in-sync with the array, it is important to set the "fullsync" flags. This is an exact analog to the setting of this flag in hot_add_disk methods. Currently, only v1.x metadata supports having devices in an array which are not fully in-sync (it keep track of how in sync they are). The 'fullsync' flag only makes a difference when a write-intent bitmap is being used. In this case it tells recovery to ignore the bitmap and recovery all blocks. This fix is already in place for raid1, but not raid5/6 or raid10. So without this fix, a raid1 ir raid4/5/6 array with version 1.x metadata and a write intent bitmaps, that is stopped in the middle of a recovery, will appear to complete the recovery instantly after it is reassembled, but the recovery will not be correct. If you might have an array like that, issueing echo repair > /sys/block/mdXX/md/sync_action will make sure recovery completes properly. Cc: Signed-off-by: Neil Brown diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 1de17da..a71277b 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2137,6 +2137,8 @@ static int run(mddev_t *mddev) !test_bit(In_sync, &disk->rdev->flags)) { disk->head_position = 0; mddev->degraded++; + if (disk->rdev) + conf->fullsync = 1; } } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c37e256..475fba4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4305,7 +4305,9 @@ static int run(mddev_t *mddev) " disk %d\n", bdevname(rdev->bdev,b), raid_disk); working_disks++; - } + } else + /* Cannot rely on bitmap to complete recovery */ + conf->fullsync = 1; } /* -- cgit v0.10.2 From efe311431869b40d67911820a309f9a1a41306f3 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:31:14 +1000 Subject: Don't acknowlege that stripe-expand is complete until it really is. We shouldn't acknowledge that a stripe has been expanded (When reshaping a raid5 by adding a device) until the moved data has actually been written out. However we are currently acknowledging (by calling md_done_sync) when the POST_XOR is complete and before the write. So track in s.locked whether there are pending writes, and don't call md_done_sync yet if there are. Note: we all set R5_LOCKED on devices which are are about to read from. This probably isn't technically necessary, but is usually done when writing a block, and justifies the use of s.locked here. This bug can lead to a crash if an array is stopped while an reshape is in progress. Cc: Signed-off-by: Neil Brown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 475fba4..54c8ee2 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2898,6 +2898,8 @@ static void handle_stripe5(struct stripe_head *sh) for (i = conf->raid_disks; i--; ) { set_bit(R5_Wantwrite, &sh->dev[i].flags); + set_bit(R5_LOCKED, &dev->flags); + s.locked++; if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) sh->ops.count++; } @@ -2911,6 +2913,7 @@ static void handle_stripe5(struct stripe_head *sh) conf->raid_disks); s.locked += handle_write_operations5(sh, 1, 1); } else if (s.expanded && + s.locked == 0 && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) { clear_bit(STRIPE_EXPAND_READY, &sh->state); atomic_dec(&conf->reshape_stripes); -- cgit v0.10.2 From 9bbbca3a0ee09293108b67835c6bdf6196d7bcb3 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:31:17 +1000 Subject: Fix error paths if md_probe fails. md_probe can fail (e.g. alloc_disk could fail) without returning an error (as it alway returns NULL). So when we call mddev_find immediately afterwards, we need to check that md_probe actually succeeded. This means checking that mdev->gendisk is non-NULL. cc: Cc: Dave Jones Signed-off-by: Neil Brown diff --git a/drivers/md/md.c b/drivers/md/md.c index 7cf512a..2580ac1 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3897,8 +3897,10 @@ static void autorun_devices(int part) md_probe(dev, NULL, NULL); mddev = mddev_find(dev); - if (!mddev) { - printk(KERN_ERR + if (!mddev || !mddev->gendisk) { + if (mddev) + mddev_put(mddev); + printk(KERN_ERR "md: cannot allocate memory for md drive.\n"); break; } -- cgit v0.10.2 From 79c537998d143b127c8c662a403c3356cb885f1c Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Sun, 29 Jun 2008 00:16:56 +0200 Subject: sched: fix cpu hotplug the CPU hotplug problems (crashes under high-volume unplug+replug tests) seem to be related to migrate_dead_tasks(). Firstly I added traces to see all tasks being migrated with migrate_live_tasks() and migrate_dead_tasks(). On my setup the problem pops up (the one with "se == NULL" in the loop of pick_next_task_fair()) shortly after the traces indicate that some has been migrated with migrate_dead_tasks()). btw., I can reproduce it much faster now with just a plain cpu down/up loop. [disclaimer] Well, unless I'm really missing something important in this late hour [/desclaimer] pick_next_task() is not something appropriate for migrate_dead_tasks() :-) the following change seems to eliminate the problem on my setup (although, I kept it running only for a few minutes to get a few messages indicating migrate_dead_tasks() does move tasks and the system is still ok) Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 3aaa5c8..a66e856 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5887,6 +5887,7 @@ static void migrate_dead_tasks(unsigned int dead_cpu) next = pick_next_task(rq, rq->curr); if (!next) break; + next->sched_class->put_prev_task(rq, next); migrate_dead(dead_cpu, next); } -- cgit v0.10.2 From f72e9df0e04c0ea7b5c97e6db5b114234bf3c36f Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Thu, 26 Jun 2008 10:54:34 +0300 Subject: Fix and clean top .gitignore Removed vmlinux* rule because it matches too many useful files, replacing it with rules matching filetype by filename (e.g. *.gz). Also unignored .mailmap from the top directory. Added a comment telling the user how to check for tracked files being ignored. Signed-off-by: Eduard - Gabriel Munteanu Signed-off-by: Linus Torvalds diff --git a/.gitignore b/.gitignore index 9bb1cb6..869e1a3 100644 --- a/.gitignore +++ b/.gitignore @@ -3,6 +3,10 @@ # subdirectories here. Add them in the ".gitignore" file # in that subdirectory instead. # +# NOTE! Please use 'git-ls-files -i --exclude-standard' +# command after changing this file, to see if there are +# any tracked files which get ignored after the change. +# # Normal rules # .* @@ -18,19 +22,21 @@ *.lst *.symtypes *.order +*.elf +*.bin +*.gz # # Top-level generic files # tags TAGS -vmlinux* -!vmlinux.lds.S -!vmlinux.lds.h +vmlinux System.map Module.markers Module.symvers !.gitignore +!.mailmap # # Generated include files -- cgit v0.10.2 From fcb43042ef55d2f46b0efa5d7746967cef38f056 Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Tue, 24 Jun 2008 16:06:23 +0800 Subject: x86: fix cpu hotplug crash Vegard Nossum reported crashes during cpu hotplug tests: http://marc.info/?l=linux-kernel&m=121413950227884&w=4 In function _cpu_up, the panic happens when calling __raw_notifier_call_chain at the second time. Kernel doesn't panic when calling it at the first time. If just say because of nr_cpu_ids, that's not right. By checking the source code, I found that function do_boot_cpu is the culprit. Consider below call chain: _cpu_up=>__cpu_up=>smp_ops.cpu_up=>native_cpu_up=>do_boot_cpu. So do_boot_cpu is called in the end. In do_boot_cpu, if boot_error==true, cpu_clear(cpu, cpu_possible_map) is executed. So later on, when _cpu_up calls __raw_notifier_call_chain at the second time to report CPU_UP_CANCELED, because this cpu is already cleared from cpu_possible_map, get_cpu_sysdev returns NULL. Many resources are related to cpu_possible_map, so it's better not to change it. Below patch against 2.6.26-rc7 fixes it by removing the bit clearing in cpu_possible_map. Signed-off-by: Zhang Yanmin Tested-by: Vegard Nossum Acked-by: Rusty Russell Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 56078d6..3e1cece 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -996,7 +996,6 @@ do_rest: #endif cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ - cpu_clear(cpu, cpu_possible_map); cpu_clear(cpu, cpu_present_map); per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID; } -- cgit v0.10.2 From 11dbc963a8f6128595d0f6ecf138dc369e144997 Mon Sep 17 00:00:00 2001 From: TAKADA Yoshihito Date: Mon, 30 Jun 2008 13:44:45 +0900 Subject: ptrace GET/SET FPXREGS broken When I update kernel 2.6.25 from 2.6.24, gdb does not work. On 2.6.25, ptrace(PTRACE_GETFPXREGS, ...) returns ENODEV. But 2.6.24 kernel's ptrace() returns EIO. It is issue of compatibility. I attached test program as pt.c and patch for fix it. #include #include #include #include #include #include #include struct user_fxsr_struct { unsigned short cwd; unsigned short swd; unsigned short twd; unsigned short fop; long fip; long fcs; long foo; long fos; long mxcsr; long reserved; long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */ long padding[56]; }; int main(void) { pid_t pid; pid = fork(); switch(pid){ case -1:/* error */ break; case 0:/* child */ child(); break; default: parent(pid); break; } return 0; } int child(void) { ptrace(PTRACE_TRACEME); kill(getpid(), SIGSTOP); sleep(10); return 0; } int parent(pid_t pid) { int ret; struct user_fxsr_struct fpxregs; ret = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpxregs); if(ret < 0){ printf("%d: %s.\n", errno, strerror(errno)); } kill(pid, SIGCONT); wait(pid); return 0; } /* in the kerel, at kernel/i387.c get_fpxregs() */ Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index eb9ddd8..95e80e5 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -162,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) @@ -179,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) -- cgit v0.10.2 From 4bbff7e408a54cce88d26191191e8bcda2a60d55 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Thu, 26 Jun 2008 09:13:48 -0400 Subject: Input: add KEY_MEDIA_REPEAT definition This patch adds the Repeat key to the input layer. The usage in the HUT is 0xBC (listed under "15.7 Transport Controls"). Signed-off-by: Dmitry Torokhov diff --git a/include/linux/input.h b/include/linux/input.h index e075c4b..d150c57 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -534,8 +534,8 @@ struct input_absinfo { #define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ #define KEY_FRAMEFORWARD 0x1b5 - #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 -- cgit v0.10.2 From 656acd2bbc4ce7f224de499ee255698701396c48 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 26 Jun 2008 11:30:02 -0400 Subject: Input: fix locking in force-feedback core The newly added event_lock spinlock in the input core disallows sleeping and therefore using mutexes in event handlers. Convert force-feedback core to rely on event_lock instead of mutex to protect slots allocated for fore-feedback effects. The original mutex is still used to serialize uploading and erasing of effects. Reported-by: Anssi Hannula Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index eebc724..4c01464 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -166,8 +166,10 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, if (ret) goto out; + spin_lock_irq(&dev->event_lock); ff->effects[id] = *effect; ff->effect_owners[id] = file; + spin_unlock_irq(&dev->event_lock); out: mutex_unlock(&ff->mutex); @@ -189,16 +191,22 @@ static int erase_effect(struct input_dev *dev, int effect_id, if (error) return error; + spin_lock_irq(&dev->event_lock); ff->playback(dev, effect_id, 0); + ff->effect_owners[effect_id] = NULL; + spin_unlock_irq(&dev->event_lock); if (ff->erase) { error = ff->erase(dev, effect_id); - if (error) + if (error) { + spin_lock_irq(&dev->event_lock); + ff->effect_owners[effect_id] = file; + spin_unlock_irq(&dev->event_lock); + return error; + } } - ff->effect_owners[effect_id] = NULL; - return 0; } @@ -263,8 +271,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type, if (type != EV_FF) return 0; - mutex_lock(&ff->mutex); - switch (code) { case FF_GAIN: if (!test_bit(FF_GAIN, dev->ffbit) || value > 0xffff) @@ -286,7 +292,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type, break; } - mutex_unlock(&ff->mutex); return 0; } EXPORT_SYMBOL_GPL(input_ff_event); -- cgit v0.10.2 From 08383ef29faa7fa247962e6b8662c8683e34da01 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 27 Jun 2008 15:15:12 +0100 Subject: [ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_off This patch annotates the platform_secondary_init function in arch/arm/mach-realview/platsmp.c with trace_hardirqs_off to avoid a warning when LOCKDEP and TRACE_IRQFLAGS are enabled. Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 3e57428..8e813ed 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit platform_secondary_init(unsigned int cpu) { + trace_hardirqs_off(); + /* * the primary core may have used a "cross call" soft interrupt * to get this processor out of WFI in the BootMonitor - make -- cgit v0.10.2 From a529b59060862b36a4dae968534e090c6c77272e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Jun 2008 20:13:31 +0200 Subject: Revert "BAST: Remove old IDE driver" This reverts commit ac1623625c5818bbdf5c68973098ba386ba7a004. It was premature to remove it now, we will do it post-2.6.26. Thanks to Russell King for noticing the issue. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 8e07de2..1607536 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -823,6 +823,13 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. +config BLK_DEV_IDE_BAST + tristate "Simtec BAST / Thorcom VR1000 IDE support" + depends on ARM && (ARCH_BAST || MACH_VR1000) + help + Say Y here if you want to support the onboard IDE channels on the + Simtec BAST or the Thorcom VR1000 + config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 5bc2605..936e7b0 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o +obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c new file mode 100644 index 0000000..8e8c281 --- /dev/null +++ b/drivers/ide/arm/bast-ide.c @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "bast-ide" + +static int __init bastide_register(unsigned int base, unsigned int aux, int irq) +{ + ide_hwif_t *hwif; + hw_regs_t hw; + int i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + + memset(&hw, 0, sizeof(hw)); + + base += BAST_IDE_CS; + aux += BAST_IDE_CS; + + for (i = 0; i <= 7; i++) { + hw.io_ports_array[i] = (unsigned long)base; + base += 0x20; + } + + hw.io_ports.ctl_addr = aux + (6 * 0x20); + hw.irq = irq; + hw.chipset = ide_generic; + + hwif = ide_find_port(); + if (hwif == NULL) + goto out; + + i = hwif->index; + + ide_init_port_data(hwif, i); + ide_init_port_hw(hwif, &hw); + hwif->port_ops = NULL; + + idx[0] = i; + + ide_device_add(idx, NULL); +out: + return 0; +} + +static int __init bastide_init(void) +{ + unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; + + /* we can treat the VR1000 and the BAST the same */ + + if (!(machine_is_bast() || machine_is_vr1000())) + return 0; + + printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); + + if (!request_mem_region(base, 0x400000, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + + bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); + bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); + + return 0; +} + +module_init(bastide_init); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v0.10.2 From 4283e1babe167e0ba856bb5d039465358e90785c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Jun 2008 20:14:45 +0200 Subject: ide: fix /proc/ide/ide?/mate reporting Now that we support warm-plug mate port will be registered even if there are no devices attached to it. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 55ec7f7..8af88bf 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -76,7 +76,7 @@ static int proc_ide_read_mate ide_hwif_t *hwif = (ide_hwif_t *) data; int len; - if (hwif && hwif->mate && hwif->mate->present) + if (hwif && hwif->mate) len = sprintf(page, "%s\n", hwif->mate->name); else len = sprintf(page, "(none)\n"); -- cgit v0.10.2 From 84ebe1cdae56707b9aa1b40ae5aa7d817ba745f5 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 30 Jun 2008 12:41:30 -0700 Subject: netfilter: nf_conntrack_tcp: fixing to check the lower bound of valid ACK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Lost connections was reported by Thomas Bätzler (running 2.6.25 kernel) on the netfilter mailing list (see the thread "Weird nat/conntrack Problem with PASV FTP upload"). He provided tcpdump recordings which helped to find a long lingering bug in conntrack. In TCP connection tracking, checking the lower bound of valid ACK could lead to mark valid packets as INVALID because: - We have got a "higher or equal" inequality, but the test checked the "higher" condition only; fixed. - If the packet contains a SACK option, it could occur that the ACK value was before the left edge of our (S)ACK "window": if a previous packet from the other party intersected the right edge of the window of the receiver, we could move forward the window parameters beyond accepting a valid ack. Therefore in this patch we check the rightmost SACK edge instead of the ACK value in the lower bound of valid (S)ACK test. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index ba94004..271cd01 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -331,12 +331,13 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph) I. Upper bound for valid data: seq <= sender.td_maxend II. Lower bound for valid data: seq + len >= sender.td_end - receiver.td_maxwin - III. Upper bound for valid ack: sack <= receiver.td_end - IV. Lower bound for valid ack: ack >= receiver.td_end - MAXACKWINDOW + III. Upper bound for valid (s)ack: sack <= receiver.td_end + IV. Lower bound for valid (s)ack: sack >= receiver.td_end - MAXACKWINDOW - where sack is the highest right edge of sack block found in the packet. + where sack is the highest right edge of sack block found in the packet + or ack in the case of packet without SACK option. - The upper bound limit for a valid ack is not ignored - + The upper bound limit for a valid (s)ack is not ignored - we doesn't have to deal with fragments. */ @@ -606,12 +607,12 @@ static bool tcp_in_window(const struct nf_conn *ct, before(seq, sender->td_maxend + 1), after(end, sender->td_end - receiver->td_maxwin - 1), before(sack, receiver->td_end + 1), - after(ack, receiver->td_end - MAXACKWINDOW(sender))); + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)); if (before(seq, sender->td_maxend + 1) && after(end, sender->td_end - receiver->td_maxwin - 1) && before(sack, receiver->td_end + 1) && - after(ack, receiver->td_end - MAXACKWINDOW(sender))) { + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)) { /* * Take into account window scaling (RFC 1323). */ -- cgit v0.10.2 From aebb6a849cfe7d89bcacaaecc20a480dfc1180e7 Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Mon, 30 Jun 2008 12:42:23 -0700 Subject: textsearch: fix Boyer-Moore text search bug The current logic has a bug which cannot find matching pattern, if the pattern is matched from the first character of target string. for example: pattern=abc, string=abcdefg pattern=a, string=abcdefg Searching algorithm should return 0 for those things. Signed-off-by: Joonwoo Park Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/lib/ts_bm.c b/lib/ts_bm.c index d90822c..4a7fce7 100644 --- a/lib/ts_bm.c +++ b/lib/ts_bm.c @@ -63,7 +63,7 @@ static unsigned int bm_find(struct ts_config *conf, struct ts_state *state) struct ts_bm *bm = ts_config_priv(conf); unsigned int i, text_len, consumed = state->offset; const u8 *text; - int shift = bm->patlen, bs; + int shift = bm->patlen - 1, bs; for (;;) { text_len = conf->get_next_block(consumed, &text, conf, state); -- cgit v0.10.2 From 15ea0ebc5b7305cc75189cb6b7924d0db5278e0c Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Jun 2008 16:19:52 -0400 Subject: hostap: don't report useless WDS frames by default DEBUG_EXTRA is reported to the kernel log by default, but DEBUG_EXTRA2 is not. Unrelated WDS frames pollute the log unnecessarily. Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 4fd7380..47884c3 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -551,7 +551,7 @@ hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr_4addr *hdr, hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff || hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) { /* RA (or BSSID) is not ours - drop */ - PDEBUG(DEBUG_EXTRA, "%s: received WDS frame with " + PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with " "not own or broadcast %s=%s\n", local->dev->name, fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID", -- cgit v0.10.2 From 1bcca3c463e4930cef9986b05165bb0b3eb46f63 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Jun 2008 16:19:58 -0400 Subject: hostap: fix sparse warnings Rewrite AID calculation in handle_pspoll() to avoid truncating bits. Make hostap_80211_header_parse() static, don't export it. Avoid shadowing variables. Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 47884c3..020f450 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -64,7 +64,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, int hdrlen, phdrlen, head_need, tail_need; u16 fc; int prism_header, ret; - struct ieee80211_hdr_4addr *hdr; + struct ieee80211_hdr_4addr *fhdr; iface = netdev_priv(dev); local = iface->local; @@ -83,8 +83,8 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, phdrlen = 0; } - hdr = (struct ieee80211_hdr_4addr *) skb->data; - fc = le16_to_cpu(hdr->frame_ctl); + fhdr = (struct ieee80211_hdr_4addr *) skb->data; + fc = le16_to_cpu(fhdr->frame_ctl); if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { printk(KERN_DEBUG "%s: dropped management frame with header " diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 0acd958..ab981af 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -1930,7 +1930,7 @@ static void handle_pspoll(local_info_t *local, PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n"); return; } - aid &= ~BIT(15) & ~BIT(14); + aid &= ~(BIT(15) | BIT(14)); if (aid == 0 || aid > MAX_AID_TABLE_SIZE) { PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid); return; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ed4317a1..80039a0 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -533,10 +533,10 @@ static void prism2_detach(struct pcmcia_device *link) do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) #define CFG_CHECK2(fn, retf) \ -do { int ret = (retf); \ -if (ret != 0) { \ - PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \ - cs_error(link, fn, ret); \ +do { int _ret = (retf); \ +if (_ret != 0) { \ + PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \ + cs_error(link, fn, _ret); \ goto next_entry; \ } \ } while (0) diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index cdf90c4..936f52e 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2835,7 +2835,7 @@ static void hostap_passive_scan(unsigned long data) { local_info_t *local = (local_info_t *) data; struct net_device *dev = local->dev; - u16 channel; + u16 chan; if (local->passive_scan_interval <= 0) return; @@ -2872,11 +2872,11 @@ static void hostap_passive_scan(unsigned long data) printk(KERN_DEBUG "%s: passive scan channel %d\n", dev->name, local->passive_scan_channel); - channel = local->passive_scan_channel; + chan = local->passive_scan_channel; local->passive_scan_state = PASSIVE_SCAN_WAIT; local->passive_scan_timer.expires = jiffies + HZ / 10; } else { - channel = local->channel; + chan = local->channel; local->passive_scan_state = PASSIVE_SCAN_LISTEN; local->passive_scan_timer.expires = jiffies + local->passive_scan_interval * HZ; @@ -2884,9 +2884,9 @@ static void hostap_passive_scan(unsigned long data) if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST | (HFA384X_TEST_CHANGE_CHANNEL << 8), - channel, NULL, 0)) + chan, NULL, 0)) printk(KERN_ERR "%s: passive scan channel set %d " - "failed\n", dev->name, channel); + "failed\n", dev->name, chan); add_timer(&local->passive_scan_timer); } diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index f7aec93..a38e85f 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -594,7 +594,8 @@ void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) } -int hostap_80211_header_parse(const struct sk_buff *skb, unsigned char *haddr) +static int hostap_80211_header_parse(const struct sk_buff *skb, + unsigned char *haddr) { struct hostap_interface *iface = netdev_priv(skb->dev); local_info_t *local = iface->local; @@ -857,7 +858,6 @@ const struct header_ops hostap_80211_ops = { .rebuild = eth_rebuild_header, .cache = eth_header_cache, .cache_update = eth_header_cache_update, - .parse = hostap_80211_header_parse, }; EXPORT_SYMBOL(hostap_80211_ops); @@ -1150,7 +1150,6 @@ EXPORT_SYMBOL(hostap_set_roaming); EXPORT_SYMBOL(hostap_set_auth_algs); EXPORT_SYMBOL(hostap_dump_rx_header); EXPORT_SYMBOL(hostap_dump_tx_header); -EXPORT_SYMBOL(hostap_80211_header_parse); EXPORT_SYMBOL(hostap_80211_get_hdrlen); EXPORT_SYMBOL(hostap_get_stats); EXPORT_SYMBOL(hostap_setup_dev); -- cgit v0.10.2 From 23976efedd5ecb420b87455787c537eb4aed1981 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 28 Jun 2008 02:50:13 +0300 Subject: mac80211: don't accept WEP keys other than WEP40 and WEP104 This patch makes mac80211 refuse a WEP key whose length is not WEP40 nor WEP104. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/include/net/mac80211.h b/include/net/mac80211.h index dae3f9e..bcd1623 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -595,6 +595,15 @@ enum ieee80211_key_alg { ALG_CCMP, }; +/** + * enum ieee80211_key_len - key length + * @WEP40: WEP 5 byte long key + * @WEP104: WEP 13 byte long key + */ +enum ieee80211_key_len { + LEN_WEP40 = 5, + LEN_WEP104 = 13, +}; /** * enum ieee80211_key_flags - key flags diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 6106cb7..e840421 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -95,6 +95,13 @@ static int ieee80211_set_encryption(struct net_device *dev, u8 *sta_addr, } } + if (alg == ALG_WEP && + key_len != LEN_WEP40 && key_len != LEN_WEP104) { + ieee80211_key_free(key); + err = -EINVAL; + goto out_unlock; + } + ieee80211_key_link(key, sdata, sta); if (set_tx_key || (!sta && !sdata->default_key && key)) -- cgit v0.10.2 From c0efd232929c2cd87238de2cccdaf4e845be5b0c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 30 Jun 2008 15:04:50 -0300 Subject: V4L/DVB (8145a): USB Video Class driver This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/MAINTAINERS b/MAINTAINERS index 8f0ec46..e6c06fa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4314,6 +4314,14 @@ L: netdev@vger.kernel.org W: http://www.linux-usb.org/usbnet S: Maintained +USB VIDEO CLASS +P: Laurent Pinchart +M: laurent.pinchart@skynet.be +L: linx-uvc-devel@berlios.de +L: video4linux-list@redhat.com +W: http://linux-uvc.berlios.de +S: Maintained + USB W996[87]CF DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3b26fbd3..5ccb0ae 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -793,6 +793,14 @@ menuconfig V4L_USB_DRIVERS if V4L_USB_DRIVERS && USB +config USB_VIDEO_CLASS + tristate "USB Video Class (UVC)" + ---help--- + Support for the USB Video Class (UVC). Currently only video + input devices, such as webcams, are supported. + + For more information see: + source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index dff0d6a..ecbbfaa 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -136,6 +136,8 @@ obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_VIDEO_AU0828) += au0828/ +obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile new file mode 100644 index 0000000..fb39bbf --- /dev/null +++ b/drivers/media/video/uvc/Makefile @@ -0,0 +1,3 @@ +uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \ + uvc_status.o uvc_isight.o +obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c new file mode 100644 index 0000000..f0ee46d --- /dev/null +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -0,0 +1,1256 @@ +/* + * uvc_ctrl.c -- USB Video Class driver - Controls + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +#define UVC_CTRL_NDATA 2 +#define UVC_CTRL_DATA_CURRENT 0 +#define UVC_CTRL_DATA_BACKUP 1 + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_control_info uvc_ctrls[] = { + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .index = 0, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .index = 1, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .index = 2, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .index = 3, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .index = 4, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .index = 8, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .index = 9, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .index = 10, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .index = 11, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .index = 1, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_GET_RES + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .index = 2, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .index = 3, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .index = 17, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .index = 12, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .index = 13, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .index = 7, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, +}; + +static struct uvc_menu_info power_line_frequency_controls[] = { + { 0, "Disabled" }, + { 1, "50 Hz" }, + { 2, "60 Hz" }, +}; + +static struct uvc_menu_info exposure_auto_controls[] = { + { 1, "Manual Mode" }, + { 2, "Auto Mode" }, + { 4, "Shutter Priority Mode" }, + { 8, "Aperture Priority Mode" }, +}; + +static struct uvc_control_mapping uvc_ctrl_mappings[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_HUE, + .name = "Hue", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_SHARPNESS, + .name = "Sharpness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAMMA, + .name = "Gamma", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_BACKLIGHT_COMPENSATION, + .name = "Backlight Compensation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAIN, + .name = "Gain", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .name = "Power Line Frequency", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .size = 2, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_ENUM, + .menu_info = power_line_frequency_controls, + .menu_count = ARRAY_SIZE(power_line_frequency_controls), + }, + { + .id = V4L2_CID_HUE_AUTO, + .name = "Hue, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_AUTO, + .name = "Exposure, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .size = 4, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_BITMASK, + .menu_info = exposure_auto_controls, + .menu_count = ARRAY_SIZE(exposure_auto_controls), + }, + { + .id = V4L2_CID_EXPOSURE_AUTO_PRIORITY, + .name = "Exposure, Auto Priority", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_ABSOLUTE, + .name = "Exposure (Absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .size = 32, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Temperature, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE, + .name = "White Balance Temperature", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Component, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .name = "White Balance Blue Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_RED_BALANCE, + .name = "White Balance Red Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 16, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_FOCUS_ABSOLUTE, + .name = "Focus (absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_FOCUS_AUTO, + .name = "Focus, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id) +{ + return ctrl->data + id * ctrl->info->size; +} + +static inline int uvc_get_bit(const __u8 *data, int bit) +{ + return (data[bit >> 3] >> (bit & 7)) & 1; +} + +/* Extract the bit string specified by mapping->offset and mapping->size + * from the little-endian data stored at 'data' and return the result as + * a signed 32bit integer. Sign extension will be performed if the mapping + * references a signed data type. + */ +static __s32 uvc_get_le_value(const __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __s32 value = 0; + __u8 mask; + + data += offset / 8; + offset &= 7; + mask = ((1LL << bits) - 1) << offset; + + for (; bits > 0; data++) { + __u8 byte = *data & mask; + value |= offset > 0 ? (byte >> offset) : (byte << (-offset)); + bits -= 8 - (offset > 0 ? offset : 0); + offset -= 8; + mask = (1 << bits) - 1; + } + + /* Sign-extend the value if needed */ + if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) + value |= -(value & (1 << (mapping->size - 1))); + + return value; +} + +/* Set the bit string specified by mapping->offset and mapping->size + * in the little-endian data stored at 'data' to the value 'value'. + */ +static void uvc_set_le_value(__s32 value, __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __u8 mask; + + data += offset / 8; + offset &= 7; + + for (; bits > 0; data++) { + mask = ((1LL << bits) - 1) << offset; + *data = (*data & ~mask) | ((value << offset) & mask); + value >>= offset ? offset : 8; + bits -= 8 - offset; + offset = 0; + } +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static const __u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING; +static const __u8 uvc_camera_guid[16] = UVC_GUID_UVC_CAMERA; +static const __u8 uvc_media_transport_input_guid[16] = + UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT; + +static int uvc_entity_match_guid(struct uvc_entity *entity, __u8 guid[16]) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case ITT_CAMERA: + return memcmp(uvc_camera_guid, guid, 16) == 0; + + case ITT_MEDIA_TRANSPORT_INPUT: + return memcmp(uvc_media_transport_input_guid, guid, 16) == 0; + + case VC_PROCESSING_UNIT: + return memcmp(uvc_processing_guid, guid, 16) == 0; + + case VC_EXTENSION_UNIT: + return memcmp(entity->extension.guidExtensionCode, + guid, 16) == 0; + + default: + return 0; + } +} + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static void __uvc_find_control(struct uvc_entity *entity, __u32 v4l2_id, + struct uvc_control_mapping **mapping, struct uvc_control **control, + int next) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *map; + unsigned int i; + + if (entity == NULL) + return; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + list_for_each_entry(map, &ctrl->info->mappings, list) { + if ((map->id == v4l2_id) && !next) { + *control = ctrl; + *mapping = map; + return; + } + + if ((*mapping == NULL || (*mapping)->id > map->id) && + (map->id > v4l2_id) && next) { + *control = ctrl; + *mapping = map; + } + } + } +} + +struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping) +{ + struct uvc_control *ctrl = NULL; + struct uvc_entity *entity; + int next = v4l2_id & V4L2_CTRL_FLAG_NEXT_CTRL; + + *mapping = NULL; + + /* Mask the query flags. */ + v4l2_id &= V4L2_CTRL_ID_MASK; + + /* Find the control. */ + __uvc_find_control(video->processing, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + + list_for_each_entry(entity, &video->iterms, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + list_for_each_entry(entity, &video->extensions, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + if (ctrl == NULL && !next) + uvc_trace(UVC_TRACE_CONTROL, "Control 0x%08x not found.\n", + v4l2_id); + + return ctrl; +} + +int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + __u8 data[8]; + int ret; + + ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping); + if (ctrl == NULL) + return -EINVAL; + + v4l2_ctrl->id = mapping->id; + v4l2_ctrl->type = mapping->v4l2_type; + strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name); + v4l2_ctrl->flags = 0; + + if (!(ctrl->info->flags & UVC_CONTROL_SET_CUR)) + v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + if (ctrl->info->flags & UVC_CONTROL_GET_DEF) { + if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->default_value = uvc_get_le_value(data, mapping); + } + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + v4l2_ctrl->minimum = 0; + v4l2_ctrl->maximum = mapping->menu_count - 1; + v4l2_ctrl->step = 1; + + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == v4l2_ctrl->default_value) { + v4l2_ctrl->default_value = i; + break; + } + } + + return 0; + } + + if (ctrl->info->flags & UVC_CONTROL_GET_MIN) { + if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->minimum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_MAX) { + if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->maximum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_RES) { + if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->step = uvc_get_le_value(data, mapping); + } + + return 0; +} + + +/* -------------------------------------------------------------------------- + * Control transactions + * + * To make extended set operations as atomic as the hardware allows, controls + * are handled using begin/commit/rollback operations. + * + * At the beginning of a set request, uvc_ctrl_begin should be called to + * initialize the request. This function acquires the control lock. + * + * When setting a control, the new value is stored in the control data field + * at position UVC_CTRL_DATA_CURRENT. The control is then marked as dirty for + * later processing. If the UVC and V4L2 control sizes differ, the current + * value is loaded from the hardware before storing the new value in the data + * field. + * + * After processing all controls in the transaction, uvc_ctrl_commit or + * uvc_ctrl_rollback must be called to apply the pending changes to the + * hardware or revert them. When applying changes, all controls marked as + * dirty will be modified in the UVC device, and the dirty flag will be + * cleared. When reverting controls, the control data field + * UVC_CTRL_DATA_CURRENT is reverted to its previous value + * (UVC_CTRL_DATA_BACKUP) for all dirty controls. Both functions release the + * control lock. + */ +int uvc_ctrl_begin(struct uvc_video_device *video) +{ + return mutex_lock_interruptible(&video->ctrl_mutex) ? -ERESTARTSYS : 0; +} + +static int uvc_ctrl_commit_entity(struct uvc_device *dev, + struct uvc_entity *entity, int rollback) +{ + struct uvc_control *ctrl; + unsigned int i; + int ret; + + if (entity == NULL) + return 0; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL || !ctrl->dirty) + continue; + + if (!rollback) + ret = uvc_query_ctrl(dev, SET_CUR, ctrl->entity->id, + dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + else + ret = 0; + + if (rollback || ret < 0) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + ctrl->info->size); + + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + ctrl->loaded = 0; + + ctrl->dirty = 0; + + if (ret < 0) + return ret; + } + + return 0; +} + +int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback) +{ + struct uvc_entity *entity; + int ret = 0; + + /* Find the control. */ + ret = uvc_ctrl_commit_entity(video->dev, video->processing, rollback); + if (ret < 0) + goto done; + + list_for_each_entry(entity, &video->iterms, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + + list_for_each_entry(entity, &video->extensions, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + +done: + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + return -EINVAL; + + if (!ctrl->loaded) { + ret = uvc_query_ctrl(video->dev, GET_CUR, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + xctrl->value = uvc_get_le_value( + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == xctrl->value) { + xctrl->value = i; + break; + } + } + } + + return 0; +} + +int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + s32 value = xctrl->value; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_SET_CUR) == 0) + return -EINVAL; + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + if (value < 0 || value >= mapping->menu_count) + return -EINVAL; + value = mapping->menu_info[value].value; + } + + if (!ctrl->loaded && (ctrl->info->size * 8) != mapping->size) { + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) { + memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + 0, ctrl->info->size); + } else { + ret = uvc_query_ctrl(video->dev, GET_CUR, + ctrl->entity->id, video->dev->intfnum, + ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + } + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + if (!ctrl->dirty) { + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + } + + uvc_set_le_value(value, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + ctrl->dirty = 1; + ctrl->modified = 1; + return 0; +} + +/* -------------------------------------------------------------------------- + * Dynamic controls + */ + +int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *xctrl, int set) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + unsigned int i, found = 0; + __u8 *data; + int ret; + + /* Find the extension unit. */ + list_for_each_entry(entity, &video->extensions, chain) { + if (entity->id == xctrl->unit) + break; + } + + if (entity->id != xctrl->unit) { + uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n", + xctrl->unit); + return -EINVAL; + } + + /* Find the control. */ + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + if (ctrl->info->selector == xctrl->selector) { + found = 1; + break; + } + } + + if (!found) { + uvc_trace(UVC_TRACE_CONTROL, + "Control " UVC_GUID_FORMAT "/%u not found.\n", + UVC_GUID_ARGS(entity->extension.guidExtensionCode), + xctrl->selector); + return -EINVAL; + } + + /* Validate control data size. */ + if (ctrl->info->size != xctrl->size) + return -EINVAL; + + if ((set && !(ctrl->info->flags & UVC_CONTROL_SET_CUR)) || + (!set && !(ctrl->info->flags & UVC_CONTROL_GET_CUR))) + return -EINVAL; + + if (mutex_lock_interruptible(&video->ctrl_mutex)) + return -ERESTARTSYS; + + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + xctrl->size); + data = uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT); + + if (set && copy_from_user(data, xctrl->data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + + ret = uvc_query_ctrl(video->dev, set ? SET_CUR : GET_CUR, xctrl->unit, + video->dev->intfnum, xctrl->selector, data, + xctrl->size); + if (ret < 0) + goto out; + + if (!set && copy_to_user(xctrl->data, data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + +out: + if (ret) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + xctrl->size); + + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Restore control values after resume, skipping controls that haven't been + * changed. + * + * TODO + * - Don't restore modified controls that are back to their default value. + * - Handle restore order (Auto-Exposure Mode should be restored before + * Exposure Time). + */ +int uvc_ctrl_resume_device(struct uvc_device *dev) +{ + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + int ret; + + /* Walk the entities list and restore controls when possible. */ + list_for_each_entry(entity, &dev->entities, list) { + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + + if (ctrl->info == NULL || !ctrl->modified || + (ctrl->info->flags & UVC_CONTROL_RESTORE) == 0) + continue; + + printk(KERN_INFO "restoring control " UVC_GUID_FORMAT + "/%u/%u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->index, ctrl->info->selector); + ctrl->dirty = 1; + } + + ret = uvc_ctrl_commit_entity(dev, entity, 0); + if (ret < 0) + return ret; + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Control and mapping handling + */ + +static void uvc_ctrl_add_ctrl(struct uvc_device *dev, + struct uvc_control_info *info) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + int ret, found = 0; + unsigned int i; + + list_for_each_entry(entity, &dev->entities, list) { + if (!uvc_entity_match_guid(entity, info->entity)) + continue; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->index == info->index) { + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) + return; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + /* Check if the device control information and length match + * the user supplied information. + */ + __u32 flags; + __le16 size; + __u8 inf; + + if ((ret = uvc_query_ctrl(dev, GET_LEN, ctrl->entity->id, + dev->intfnum, info->selector, (__u8 *)&size, 2)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + if (info->size != le16_to_cpu(size)) { + uvc_trace(UVC_TRACE_CONTROL, "Control " UVC_GUID_FORMAT + "/%u size doesn't match user supplied " + "value.\n", UVC_GUID_ARGS(info->entity), + info->selector); + return; + } + + if ((ret = uvc_query_ctrl(dev, GET_INFO, ctrl->entity->id, + dev->intfnum, info->selector, &inf, 1)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + flags = info->flags; + if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) || + ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u flags don't match " + "supported operations.\n", + UVC_GUID_ARGS(info->entity), info->selector); + return; + } + } + + ctrl->info = info; + ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_NDATA, GFP_KERNEL); + uvc_trace(UVC_TRACE_CONTROL, "Added control " UVC_GUID_FORMAT "/%u " + "to device %s entity %u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->selector, dev->udev->devpath, entity->id); +} + +/* + * Add an item to the UVC control information list, and instantiate a control + * structure for each device that supports the control. + */ +int uvc_ctrl_add_info(struct uvc_control_info *info) +{ + struct uvc_control_info *ctrl; + struct uvc_device *dev; + int ret = 0; + + /* Find matching controls by walking the devices, entities and + * controls list. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + + /* First check if the list contains a control matching the new one. + * Bail out if it does. + */ + list_for_each_entry(ctrl, &uvc_driver.controls, list) { + if (memcmp(ctrl->entity, info->entity, 16)) + continue; + + if (ctrl->selector == info->selector) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u is already defined.\n", + UVC_GUID_ARGS(info->entity), info->selector); + ret = -EEXIST; + goto end; + } + if (ctrl->index == info->index) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u would overwrite index " + "%d.\n", UVC_GUID_ARGS(info->entity), + info->selector, info->index); + ret = -EEXIST; + goto end; + } + } + + list_for_each_entry(dev, &uvc_driver.devices, list) + uvc_ctrl_add_ctrl(dev, info); + + INIT_LIST_HEAD(&info->mappings); + list_add_tail(&info->list, &uvc_driver.controls); +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping) +{ + struct uvc_control_info *info; + struct uvc_control_mapping *map; + int ret = -EINVAL; + + if (mapping->id & ~V4L2_CTRL_ID_MASK) { + uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s' with " + "invalid control id 0x%08x\n", mapping->name, + mapping->id); + return -EINVAL; + } + + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) { + if (memcmp(info->entity, mapping->entity, 16) || + info->selector != mapping->selector) + continue; + + if (info->size * 8 < mapping->size + mapping->offset) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' would " + "overflow control " UVC_GUID_FORMAT "/%u\n", + mapping->name, UVC_GUID_ARGS(info->entity), + info->selector); + ret = -EOVERFLOW; + goto end; + } + + /* Check if the list contains a mapping matching the new one. + * Bail out if it does. + */ + list_for_each_entry(map, &info->mappings, list) { + if (map->id == mapping->id) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' is " + "already defined.\n", mapping->name); + ret = -EEXIST; + goto end; + } + } + + mapping->ctrl = info; + list_add_tail(&mapping->list, &info->mappings); + uvc_trace(UVC_TRACE_CONTROL, "Adding mapping %s to control " + UVC_GUID_FORMAT "/%u.\n", mapping->name, + UVC_GUID_ARGS(info->entity), info->selector); + + ret = 0; + break; + } +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +/* + * Initialize device controls. + */ +int uvc_ctrl_init_device(struct uvc_device *dev) +{ + struct uvc_control_info *info; + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + + /* Walk the entities list and instantiate controls */ + list_for_each_entry(entity, &dev->entities, list) { + unsigned int bControlSize = 0, ncontrols = 0; + __u8 *bmControls = NULL; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + bmControls = entity->extension.bmControls; + bControlSize = entity->extension.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == VC_PROCESSING_UNIT) { + bmControls = entity->processing.bmControls; + bControlSize = entity->processing.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == ITT_CAMERA) { + bmControls = entity->camera.bmControls; + bControlSize = entity->camera.bControlSize; + } + + for (i = 0; i < bControlSize; ++i) + ncontrols += hweight8(bmControls[i]); + + if (ncontrols == 0) + continue; + + entity->controls = kzalloc(ncontrols*sizeof *ctrl, GFP_KERNEL); + if (entity->controls == NULL) + return -ENOMEM; + + entity->ncontrols = ncontrols; + + ctrl = entity->controls; + for (i = 0; i < bControlSize * 8; ++i) { + if (uvc_get_bit(bmControls, i) == 0) + continue; + + ctrl->entity = entity; + ctrl->index = i; + ctrl++; + } + } + + /* Walk the controls info list and associate them with the device + * controls, then add the device to the global device list. This has + * to be done while holding the controls lock, to make sure + * uvc_ctrl_add_info() will not get called in-between. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) + uvc_ctrl_add_ctrl(dev, info); + + list_add_tail(&dev->list, &uvc_driver.devices); + mutex_unlock(&uvc_driver.ctrl_mutex); + + return 0; +} + +/* + * Cleanup device controls. + */ +void uvc_ctrl_cleanup_device(struct uvc_device *dev) +{ + struct uvc_entity *entity; + unsigned int i; + + /* Remove the device from the global devices list */ + mutex_lock(&uvc_driver.ctrl_mutex); + if (dev->list.next != NULL) + list_del(&dev->list); + mutex_unlock(&uvc_driver.ctrl_mutex); + + list_for_each_entry(entity, &dev->entities, list) { + for (i = 0; i < entity->ncontrols; ++i) + kfree(entity->controls[i].data); + + kfree(entity->controls); + } +} + +void uvc_ctrl_init(void) +{ + struct uvc_control_info *ctrl = uvc_ctrls; + struct uvc_control_info *cend = ctrl + ARRAY_SIZE(uvc_ctrls); + struct uvc_control_mapping *mapping = uvc_ctrl_mappings; + struct uvc_control_mapping *mend = + mapping + ARRAY_SIZE(uvc_ctrl_mappings); + + for (; ctrl < cend; ++ctrl) + uvc_ctrl_add_info(ctrl); + + for (; mapping < mend; ++mapping) + uvc_ctrl_add_mapping(mapping); +} diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c new file mode 100644 index 0000000..60ced58 --- /dev/null +++ b/drivers/media/video/uvc/uvc_driver.c @@ -0,0 +1,1955 @@ +/* + * uvc_driver.c -- USB Video Class driver + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +/* + * This driver aims to support video input devices compliant with the 'USB + * Video Class' specification. + * + * The driver doesn't support the deprecated v4l1 interface. It implements the + * mmap capture method only, and doesn't do any image format conversion in + * software. If your user-space application doesn't support YUYV or MJPEG, fix + * it :-). Please note that the MJPEG data have been stripped from their + * Huffman tables (DHT marker), you will need to add it back if your JPEG + * codec can't handle MJPEG data. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +#define DRIVER_AUTHOR "Laurent Pinchart " +#define DRIVER_DESC "USB Video Class driver" +#ifndef DRIVER_VERSION +#define DRIVER_VERSION "v0.1.0" +#endif + +static unsigned int uvc_quirks_param; +unsigned int uvc_trace_param; + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_format_desc uvc_fmts[] = { + { + .name = "YUV 4:2:2 (YUYV)", + .guid = UVC_GUID_FORMAT_YUY2, + .fcc = V4L2_PIX_FMT_YUYV, + }, + { + .name = "YUV 4:2:0 (NV12)", + .guid = UVC_GUID_FORMAT_NV12, + .fcc = V4L2_PIX_FMT_NV12, + }, + { + .name = "MJPEG", + .guid = UVC_GUID_FORMAT_MJPEG, + .fcc = V4L2_PIX_FMT_MJPEG, + }, + { + .name = "YVU 4:2:0 (YV12)", + .guid = UVC_GUID_FORMAT_YV12, + .fcc = V4L2_PIX_FMT_YVU420, + }, + { + .name = "YUV 4:2:0 (I420)", + .guid = UVC_GUID_FORMAT_I420, + .fcc = V4L2_PIX_FMT_YUV420, + }, + { + .name = "YUV 4:2:2 (UYVY)", + .guid = UVC_GUID_FORMAT_UYVY, + .fcc = V4L2_PIX_FMT_UYVY, + }, + { + .name = "Greyscale", + .guid = UVC_GUID_FORMAT_Y800, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "RGB Bayer", + .guid = UVC_GUID_FORMAT_BY8, + .fcc = V4L2_PIX_FMT_SBGGR8, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts, + __u8 epaddr) +{ + struct usb_host_endpoint *ep; + unsigned int i; + + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + ep = &alts->endpoint[i]; + if (ep->desc.bEndpointAddress == epaddr) + return ep; + } + + return NULL; +} + +static struct uvc_format_desc *uvc_format_by_guid(const __u8 guid[16]) +{ + unsigned int len = ARRAY_SIZE(uvc_fmts); + unsigned int i; + + for (i = 0; i < len; ++i) { + if (memcmp(guid, uvc_fmts[i].guid, 16) == 0) + return &uvc_fmts[i]; + } + + return NULL; +} + +static __u32 uvc_colorspace(const __u8 primaries) +{ + static const __u8 colorprimaries[] = { + 0, + V4L2_COLORSPACE_SRGB, + V4L2_COLORSPACE_470_SYSTEM_M, + V4L2_COLORSPACE_470_SYSTEM_BG, + V4L2_COLORSPACE_SMPTE170M, + V4L2_COLORSPACE_SMPTE240M, + }; + + if (primaries < ARRAY_SIZE(colorprimaries)) + return colorprimaries[primaries]; + + return 0; +} + +/* Simplify a fraction using a simple continued fraction decomposition. The + * idea here is to convert fractions such as 333333/10000000 to 1/30 using + * 32 bit arithmetic only. The algorithm is not perfect and relies upon two + * arbitrary parameters to remove non-significative terms from the simple + * continued fraction decomposition. Using 8 and 333 for n_terms and threshold + * respectively seems to give nice results. + */ +void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold) +{ + uint32_t *an; + uint32_t x, y, r; + unsigned int i, n; + + an = kmalloc(n_terms * sizeof *an, GFP_KERNEL); + if (an == NULL) + return; + + /* Convert the fraction to a simple continued fraction. See + * http://mathforum.org/dr.math/faq/faq.fractions.html + * Stop if the current term is bigger than or equal to the given + * threshold. + */ + x = *numerator; + y = *denominator; + + for (n = 0; n < n_terms && y != 0; ++n) { + an[n] = x / y; + if (an[n] >= threshold) { + if (n < 2) + n++; + break; + } + + r = x - an[n] * y; + x = y; + y = r; + } + + /* Expand the simple continued fraction back to an integer fraction. */ + x = 0; + y = 1; + + for (i = n; i > 0; --i) { + r = y; + y = an[i-1] * y + x; + x = r; + } + + *numerator = y; + *denominator = x; + kfree(an); +} + +/* Convert a fraction to a frame interval in 100ns multiples. The idea here is + * to compute numerator / denominator * 10000000 using 32 bit fixed point + * arithmetic only. + */ +uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator) +{ + uint32_t multiplier; + + /* Saturate the result if the operation would overflow. */ + if (denominator == 0 || + numerator/denominator >= ((uint32_t)-1)/10000000) + return (uint32_t)-1; + + /* Divide both the denominator and the multiplier by two until + * numerator * multiplier doesn't overflow. If anyone knows a better + * algorithm please let me know. + */ + multiplier = 10000000; + while (numerator > ((uint32_t)-1)/multiplier) { + multiplier /= 2; + denominator /= 2; + } + + return denominator ? numerator * multiplier / denominator : 0; +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id) +{ + struct uvc_entity *entity; + + list_for_each_entry(entity, &dev->entities, list) { + if (entity->id == id) + return entity; + } + + return NULL; +} + +static struct uvc_entity *uvc_entity_by_reference(struct uvc_device *dev, + int id, struct uvc_entity *entity) +{ + unsigned int i; + + if (entity == NULL) + entity = list_entry(&dev->entities, struct uvc_entity, list); + + list_for_each_entry_continue(entity, &dev->entities, list) { + switch (UVC_ENTITY_TYPE(entity)) { + case TT_STREAMING: + if (entity->output.bSourceID == id) + return entity; + break; + + case VC_PROCESSING_UNIT: + if (entity->processing.bSourceID == id) + return entity; + break; + + case VC_SELECTOR_UNIT: + for (i = 0; i < entity->selector.bNrInPins; ++i) + if (entity->selector.baSourceID[i] == id) + return entity; + break; + + case VC_EXTENSION_UNIT: + for (i = 0; i < entity->extension.bNrInPins; ++i) + if (entity->extension.baSourceID[i] == id) + return entity; + break; + } + } + + return NULL; +} + +/* ------------------------------------------------------------------------ + * Descriptors handling + */ + +static int uvc_parse_format(struct uvc_device *dev, + struct uvc_streaming *streaming, struct uvc_format *format, + __u32 **intervals, unsigned char *buffer, int buflen) +{ + struct usb_interface *intf = streaming->intf; + struct usb_host_interface *alts = intf->cur_altsetting; + struct uvc_format_desc *fmtdesc; + struct uvc_frame *frame; + const unsigned char *start = buffer; + unsigned int interval; + unsigned int i, n; + __u8 ftype; + + format->type = buffer[2]; + format->index = buffer[3]; + + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_FRAME_BASED: + if (buflen < 27) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Find the format descriptor from its GUID. */ + fmtdesc = uvc_format_by_guid(&buffer[5]); + + if (fmtdesc != NULL) { + strncpy(format->name, fmtdesc->name, + sizeof format->name); + format->fcc = fmtdesc->fcc; + } else { + uvc_printk(KERN_INFO, "Unknown video format " + UVC_GUID_FORMAT "\n", + UVC_GUID_ARGS(&buffer[5])); + snprintf(format->name, sizeof format->name, + UVC_GUID_FORMAT, UVC_GUID_ARGS(&buffer[5])); + format->fcc = 0; + } + + format->bpp = buffer[21]; + if (buffer[2] == VS_FORMAT_UNCOMPRESSED) { + ftype = VS_FRAME_UNCOMPRESSED; + } else { + ftype = VS_FRAME_FRAME_BASED; + if (buffer[27]) + format->flags = UVC_FMT_FLAG_COMPRESSED; + } + break; + + case VS_FORMAT_MJPEG: + if (buflen < 11) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + strncpy(format->name, "MJPEG", sizeof format->name); + format->fcc = V4L2_PIX_FMT_MJPEG; + format->flags = UVC_FMT_FLAG_COMPRESSED; + format->bpp = 0; + ftype = VS_FRAME_MJPEG; + break; + + case VS_FORMAT_DV: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + switch (buffer[8] & 0x7f) { + case 0: + strncpy(format->name, "SD-DV", sizeof format->name); + break; + case 1: + strncpy(format->name, "SDL-DV", sizeof format->name); + break; + case 2: + strncpy(format->name, "HD-DV", sizeof format->name); + break; + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d: unknown DV format %u\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, buffer[8]); + return -EINVAL; + } + + strncat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz", + sizeof format->name); + + format->fcc = V4L2_PIX_FMT_DV; + format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM; + format->bpp = 0; + ftype = 0; + + /* Create a dummy frame descriptor. */ + frame = &format->frame[0]; + memset(&format->frame[0], 0, sizeof format->frame[0]); + frame->bFrameIntervalType = 1; + frame->dwDefaultFrameInterval = 1; + frame->dwFrameInterval = *intervals; + *(*intervals)++ = 1; + format->nframes = 1; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + /* Not supported yet. */ + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d unsupported format %u\n", + dev->udev->devnum, alts->desc.bInterfaceNumber, + buffer[2]); + return -EINVAL; + } + + uvc_trace(UVC_TRACE_DESCR, "Found format %s.\n", format->name); + + buflen -= buffer[0]; + buffer += buffer[0]; + + /* Parse the frame descriptors. Only uncompressed, MJPEG and frame + * based formats have frame descriptors. + */ + while (buflen > 2 && buffer[2] == ftype) { + frame = &format->frame[format->nframes]; + + if (ftype != VS_FRAME_FRAME_BASED) + n = buflen > 25 ? buffer[25] : 0; + else + n = buflen > 21 ? buffer[21] : 0; + + n = n ? n : 3; + + if (buflen < 26 + 4*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FRAME error\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + frame->bFrameIndex = buffer[3]; + frame->bmCapabilities = buffer[4]; + frame->wWidth = le16_to_cpup((__le16 *)&buffer[5]); + frame->wHeight = le16_to_cpup((__le16 *)&buffer[7]); + frame->dwMinBitRate = le32_to_cpup((__le32 *)&buffer[9]); + frame->dwMaxBitRate = le32_to_cpup((__le32 *)&buffer[13]); + if (ftype != VS_FRAME_FRAME_BASED) { + frame->dwMaxVideoFrameBufferSize = + le32_to_cpup((__le32 *)&buffer[17]); + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[21]); + frame->bFrameIntervalType = buffer[25]; + } else { + frame->dwMaxVideoFrameBufferSize = 0; + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[17]); + frame->bFrameIntervalType = buffer[21]; + } + frame->dwFrameInterval = *intervals; + + /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize + * completely. Observed behaviours range from setting the + * value to 1.1x the actual frame size of hardwiring the + * 16 low bits to 0. This results in a higher than necessary + * memory usage as well as a wrong image size information. For + * uncompressed formats this can be fixed by computing the + * value from the frame size. + */ + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED)) + frame->dwMaxVideoFrameBufferSize = format->bpp + * frame->wWidth * frame->wHeight / 8; + + /* Some bogus devices report dwMinFrameInterval equal to + * dwMaxFrameInterval and have dwFrameIntervalStep set to + * zero. Setting all null intervals to 1 fixes the problem and + * some other divisions by zero which could happen. + */ + for (i = 0; i < n; ++i) { + interval = le32_to_cpup((__le32 *)&buffer[26+4*i]); + *(*intervals)++ = interval ? interval : 1; + } + + /* Make sure that the default frame interval stays between + * the boundaries. + */ + n -= frame->bFrameIntervalType ? 1 : 2; + frame->dwDefaultFrameInterval = + min(frame->dwFrameInterval[n], + max(frame->dwFrameInterval[0], + frame->dwDefaultFrameInterval)); + + uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n", + frame->wWidth, frame->wHeight, + 10000000/frame->dwDefaultFrameInterval, + (100000000/frame->dwDefaultFrameInterval)%10); + + format->nframes++; + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_STILL_IMAGE_FRAME) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_COLORFORMAT) { + if (buflen < 6) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d COLORFORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + format->colorspace = uvc_colorspace(buffer[3]); + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + return buffer - start; +} + +static int uvc_parse_streaming(struct uvc_device *dev, + struct usb_interface *intf) +{ + struct uvc_streaming *streaming = NULL; + struct uvc_format *format; + struct uvc_frame *frame; + struct usb_host_interface *alts = &intf->altsetting[0]; + unsigned char *_buffer, *buffer = alts->extra; + int _buflen, buflen = alts->extralen; + unsigned int nformats = 0, nframes = 0, nintervals = 0; + unsigned int size, i, n, p; + __u32 *interval; + __u16 psize; + int ret = -EINVAL; + + if (intf->cur_altsetting->desc.bInterfaceSubClass + != SC_VIDEOSTREAMING) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a " + "video streaming interface\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already " + "claimed\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + streaming = kzalloc(sizeof *streaming, GFP_KERNEL); + if (streaming == NULL) { + usb_driver_release_interface(&uvc_driver.driver, intf); + return -EINVAL; + } + + mutex_init(&streaming->mutex); + streaming->intf = usb_get_intf(intf); + streaming->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + + /* The Pico iMage webcam has its class-specific interface descriptors + * after the endpoint descriptors. + */ + if (buflen == 0) { + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + struct usb_host_endpoint *ep = &alts->endpoint[i]; + + if (ep->extralen == 0) + continue; + + if (ep->extralen > 2 && + ep->extra[1] == USB_DT_CS_INTERFACE) { + uvc_trace(UVC_TRACE_DESCR, "trying extra data " + "from endpoint %u.\n", i); + buffer = alts->endpoint[i].extra; + buflen = alts->endpoint[i].extralen; + break; + } + } + } + + /* Skip the standard interface descriptors. */ + while (buflen > 2 && buffer[1] != USB_DT_CS_INTERFACE) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen <= 2) { + uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming " + "interface descriptors found.\n"); + goto error; + } + + /* Parse the header descriptor. */ + if (buffer[2] == VS_OUTPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d OUTPUT HEADER descriptor is not supported.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } else if (buffer[2] == VS_INPUT_HEADER) { + p = buflen >= 5 ? buffer[3] : 0; + n = buflen >= 12 ? buffer[12] : 0; + + if (buflen < 13 + p*n || buffer[2] != VS_INPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d INPUT HEADER descriptor is " + "invalid.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + streaming->header.bNumFormats = p; + streaming->header.bEndpointAddress = buffer[6]; + streaming->header.bmInfo = buffer[7]; + streaming->header.bTerminalLink = buffer[8]; + streaming->header.bStillCaptureMethod = buffer[9]; + streaming->header.bTriggerSupport = buffer[10]; + streaming->header.bTriggerUsage = buffer[11]; + streaming->header.bControlSize = n; + + streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL); + if (streaming->header.bmaControls == NULL) { + ret = -ENOMEM; + goto error; + } + + memcpy(streaming->header.bmaControls, &buffer[13], p*n); + } else { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d HEADER descriptor not found.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + + _buffer = buffer; + _buflen = buflen; + + /* Count the format and frame descriptors. */ + while (_buflen > 2) { + switch (_buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_FRAME_BASED: + nformats++; + break; + + case VS_FORMAT_DV: + /* DV format has no frame descriptor. We will create a + * dummy frame descriptor with a dummy frame interval. + */ + nformats++; + nframes++; + nintervals++; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d FORMAT %u is not supported.\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, _buffer[2]); + break; + + case VS_FRAME_UNCOMPRESSED: + case VS_FRAME_MJPEG: + nframes++; + if (_buflen > 25) + nintervals += _buffer[25] ? _buffer[25] : 3; + break; + + case VS_FRAME_FRAME_BASED: + nframes++; + if (_buflen > 21) + nintervals += _buffer[21] ? _buffer[21] : 3; + break; + } + + _buflen -= _buffer[0]; + _buffer += _buffer[0]; + } + + if (nformats == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d has no supported formats defined.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } + + size = nformats * sizeof *format + nframes * sizeof *frame + + nintervals * sizeof *interval; + format = kzalloc(size, GFP_KERNEL); + if (format == NULL) { + ret = -ENOMEM; + goto error; + } + + frame = (struct uvc_frame *)&format[nformats]; + interval = (__u32 *)&frame[nframes]; + + streaming->format = format; + streaming->nformats = nformats; + + /* Parse the format descriptors. */ + while (buflen > 2) { + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_DV: + case VS_FORMAT_FRAME_BASED: + format->frame = frame; + ret = uvc_parse_format(dev, streaming, format, + &interval, buffer, buflen); + if (ret < 0) + goto error; + + frame += format->nframes; + format++; + + buflen -= ret; + buffer += ret; + continue; + + default: + break; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Parse the alternate settings to find the maximum bandwidth. */ + for (i = 0; i < intf->num_altsetting; ++i) { + struct usb_host_endpoint *ep; + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize > streaming->maxpsize) + streaming->maxpsize = psize; + } + + list_add_tail(&streaming->list, &dev->streaming); + return 0; + +error: + usb_driver_release_interface(&uvc_driver.driver, intf); + usb_put_intf(intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + return ret; +} + +/* Parse vendor-specific extensions. */ +static int uvc_parse_vendor_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + struct uvc_entity *unit; + unsigned int n, p; + int handled = 0; + + switch (le16_to_cpu(dev->udev->descriptor.idVendor)) { + case 0x046d: /* Logitech */ + if (buffer[1] != 0x41 || buffer[2] != 0x01) + break; + + /* Logitech implements several vendor specific functions + * through vendor specific extension units (LXU). + * + * The LXU descriptors are similar to XU descriptors + * (see "USB Device Video Class for Video Devices", section + * 3.7.2.6 "Extension Unit Descriptor") with the following + * differences: + * + * ---------------------------------------------------------- + * 0 bLength 1 Number + * Size of this descriptor, in bytes: 24+p+n*2 + * ---------------------------------------------------------- + * 23+p+n bmControlsType N Bitmap + * Individual bits in the set are defined: + * 0: Absolute + * 1: Relative + * + * This bitset is mapped exactly the same as bmControls. + * ---------------------------------------------------------- + * 23+p+n*2 bReserved 1 Boolean + * ---------------------------------------------------------- + * 24+p+n*2 iExtension 1 Index + * Index of a string descriptor that describes this + * extension unit. + * ---------------------------------------------------------- + */ + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 25 + p ? buffer[22+p] : 0; + + if (buflen < 25 + p + 2*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + break; + } + + unit = kzalloc(sizeof *unit + p + 2*n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = VC_EXTENSION_UNIT; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + unit->extension.bmControlsType = (__u8 *)unit + sizeof *unit + + p + n; + memcpy(unit->extension.bmControls, &buffer[23+p], 2*n); + + if (buffer[24+p+2*n] != 0) + usb_string(udev, buffer[24+p+2*n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + handled = 1; + break; + } + + return handled; +} + +static int uvc_parse_standard_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct uvc_entity *unit, *term; + struct usb_interface *intf; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned int i, n, p, len; + __u16 type; + + switch (buffer[2]) { + case VC_HEADER: + n = buflen >= 12 ? buffer[11] : 0; + + if (buflen < 12 || buflen < 12 + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d HEADER error\n", udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + dev->uvc_version = le16_to_cpup((__le16 *)&buffer[3]); + dev->clock_frequency = le32_to_cpup((__le32 *)&buffer[7]); + + /* Parse all USB Video Streaming interfaces. */ + for (i = 0; i < n; ++i) { + intf = usb_ifnum_to_if(udev, buffer[12+i]); + if (intf == NULL) { + uvc_trace(UVC_TRACE_DESCR, "device %d " + "interface %d doesn't exists\n", + udev->devnum, i); + continue; + } + + uvc_parse_streaming(dev, intf); + } + break; + + case VC_INPUT_TERMINAL: + if (buflen < 8) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, + buffer[3], type); + return 0; + } + + n = 0; + p = 0; + len = 8; + + if (type == ITT_CAMERA) { + n = buflen >= 15 ? buffer[14] : 0; + len = 15; + + } else if (type == ITT_MEDIA_TRANSPORT_INPUT) { + n = buflen >= 9 ? buffer[8] : 0; + p = buflen >= 10 + n ? buffer[9+n] : 0; + len = 10; + } + + if (buflen < len + n + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + term = kzalloc(sizeof *term + n + p, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_INPUT; + + if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) { + term->camera.bControlSize = n; + term->camera.bmControls = (__u8 *)term + sizeof *term; + term->camera.wObjectiveFocalLengthMin = + le16_to_cpup((__le16 *)&buffer[8]); + term->camera.wObjectiveFocalLengthMax = + le16_to_cpup((__le16 *)&buffer[10]); + term->camera.wOcularFocalLength = + le16_to_cpup((__le16 *)&buffer[12]); + memcpy(term->camera.bmControls, &buffer[15], n); + } else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) { + term->media.bControlSize = n; + term->media.bmControls = (__u8 *)term + sizeof *term; + term->media.bTransportModeSize = p; + term->media.bmTransportModes = (__u8 *)term + + sizeof *term + n; + memcpy(term->media.bmControls, &buffer[9], n); + memcpy(term->media.bmTransportModes, &buffer[10+n], p); + } + + if (buffer[7] != 0) + usb_string(udev, buffer[7], term->name, + sizeof term->name); + else if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) + sprintf(term->name, "Camera %u", buffer[3]); + else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) + sprintf(term->name, "Media %u", buffer[3]); + else + sprintf(term->name, "Input %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_OUTPUT_TERMINAL: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, buffer[3], type); + return 0; + } + + term = kzalloc(sizeof *term, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_OUTPUT; + term->output.bSourceID = buffer[7]; + + if (buffer[8] != 0) + usb_string(udev, buffer[8], term->name, + sizeof term->name); + else + sprintf(term->name, "Output %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_SELECTOR_UNIT: + p = buflen >= 5 ? buffer[4] : 0; + + if (buflen < 5 || buflen < 6 + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d SELECTOR_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->selector.bNrInPins = buffer[4]; + unit->selector.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->selector.baSourceID, &buffer[5], p); + + if (buffer[5+p] != 0) + usb_string(udev, buffer[5+p], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Selector %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_PROCESSING_UNIT: + n = buflen >= 8 ? buffer[7] : 0; + p = dev->uvc_version >= 0x0110 ? 10 : 9; + + if (buflen < p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d PROCESSING_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->processing.bSourceID = buffer[4]; + unit->processing.wMaxMultiplier = + le16_to_cpup((__le16 *)&buffer[5]); + unit->processing.bControlSize = buffer[7]; + unit->processing.bmControls = (__u8 *)unit + sizeof *unit; + memcpy(unit->processing.bmControls, &buffer[8], n); + if (dev->uvc_version >= 0x0110) + unit->processing.bmVideoStandards = buffer[9+n]; + + if (buffer[8+n] != 0) + usb_string(udev, buffer[8+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Processing %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_EXTENSION_UNIT: + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 24 + p ? buffer[22+p] : 0; + + if (buflen < 24 + p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + memcpy(unit->extension.bmControls, &buffer[23+p], n); + + if (buffer[23+p+n] != 0) + usb_string(udev, buffer[23+p+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE " + "descriptor (%u)\n", buffer[2]); + break; + } + + return 0; +} + +static int uvc_parse_control(struct uvc_device *dev) +{ + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned char *buffer = alts->extra; + int buflen = alts->extralen; + int ret; + + /* Parse the default alternate setting only, as the UVC specification + * defines a single alternate setting, the default alternate setting + * zero. + */ + + while (buflen > 2) { + if (uvc_parse_vendor_control(dev, buffer, buflen) || + buffer[1] != USB_DT_CS_INTERFACE) + goto next_descriptor; + + if ((ret = uvc_parse_standard_control(dev, buffer, buflen)) < 0) + return ret; + +next_descriptor: + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Check if the optional status endpoint is present. */ + if (alts->desc.bNumEndpoints == 1) { + struct usb_host_endpoint *ep = &alts->endpoint[0]; + struct usb_endpoint_descriptor *desc = &ep->desc; + + if (usb_endpoint_is_int_in(desc) && + le16_to_cpu(desc->wMaxPacketSize) >= 8 && + desc->bInterval != 0) { + uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint " + "(addr %02x).\n", desc->bEndpointAddress); + dev->int_ep = ep; + } + } + + return 0; +} + +/* ------------------------------------------------------------------------ + * USB probe and disconnect + */ + +/* + * Unregister the video devices. + */ +static void uvc_unregister_video(struct uvc_device *dev) +{ + if (dev->video.vdev) { + if (dev->video.vdev->minor == -1) + video_device_release(dev->video.vdev); + else + video_unregister_device(dev->video.vdev); + dev->video.vdev = NULL; + } +} + +/* + * Scan the UVC descriptors to locate a chain starting at an Output Terminal + * and containing the following units: + * + * - a USB Streaming Output Terminal + * - zero or one Processing Unit + * - zero, one or mode single-input Selector Units + * - zero or one multiple-input Selector Units, provided all inputs are + * connected to input terminals + * - zero, one or mode single-input Extension Units + * - one Camera Input Terminal, or one or more External terminals. + * + * A side forward scan is made on each detected entity to check for additional + * extension units. + */ +static int uvc_scan_chain_entity(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- XU %d", entity->id); + + if (entity->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more " + "than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&entity->chain, &video->extensions); + break; + + case VC_PROCESSING_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- PU %d", entity->id); + + if (video->processing != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple " + "Processing Units in chain.\n"); + return -1; + } + + video->processing = entity; + break; + + case VC_SELECTOR_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- SU %d", entity->id); + + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) + break; + + if (video->selector != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector " + "Units in chain.\n"); + return -1; + } + + video->selector = entity; + break; + + case ITT_VENDOR_SPECIFIC: + case ITT_CAMERA: + case ITT_MEDIA_TRANSPORT_INPUT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT %d\n", entity->id); + + list_add_tail(&entity->chain, &video->iterms); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type " + "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity)); + return -1; + } + + return 0; +} + +static int uvc_scan_chain_forward(struct uvc_video_device *video, + struct uvc_entity *entity, struct uvc_entity *prev) +{ + struct uvc_entity *forward; + int found; + + /* Forward scan */ + forward = NULL; + found = 0; + + while (1) { + forward = uvc_entity_by_reference(video->dev, entity->id, + forward); + if (forward == NULL) + break; + + if (UVC_ENTITY_TYPE(forward) != VC_EXTENSION_UNIT || + forward == prev) + continue; + + if (forward->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has" + "more than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&forward->chain, &video->extensions); + if (uvc_trace_param & UVC_TRACE_PROBE) { + if (!found) + printk(" (-> XU"); + + printk(" %d", forward->id); + found = 1; + } + } + if (found) + printk(")"); + + return 0; +} + +static int uvc_scan_chain_backward(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + struct uvc_entity *term; + int id = -1, i; + + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + id = entity->extension.baSourceID[0]; + break; + + case VC_PROCESSING_UNIT: + id = entity->processing.bSourceID; + break; + + case VC_SELECTOR_UNIT: + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) { + id = entity->selector.baSourceID[0]; + break; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT"); + + video->selector = entity; + for (i = 0; i < entity->selector.bNrInPins; ++i) { + id = entity->selector.baSourceID[i]; + term = uvc_entity_by_id(video->dev, id); + if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) { + uvc_trace(UVC_TRACE_DESCR, "Selector unit %d " + "input %d isn't connected to an " + "input terminal\n", entity->id, i); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" %d", term->id); + + list_add_tail(&term->chain, &video->iterms); + uvc_scan_chain_forward(video, term, entity); + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk("\n"); + + id = 0; + break; + } + + return id; +} + +static int uvc_scan_chain(struct uvc_video_device *video) +{ + struct uvc_entity *entity, *prev; + int id; + + entity = video->oterm; + uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id); + id = entity->output.bSourceID; + while (id != 0) { + prev = entity; + entity = uvc_entity_by_id(video->dev, id); + if (entity == NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found reference to " + "unknown entity %d.\n", id); + return -1; + } + + /* Process entity */ + if (uvc_scan_chain_entity(video, entity) < 0) + return -1; + + /* Forward scan */ + if (uvc_scan_chain_forward(video, entity, prev) < 0) + return -1; + + /* Stop when a terminal is found. */ + if (!UVC_ENTITY_IS_UNIT(entity)) + break; + + /* Backward scan */ + id = uvc_scan_chain_backward(video, entity); + if (id < 0) + return id; + } + + /* Initialize the video buffers queue. */ + uvc_queue_init(&video->queue); + + return 0; +} + +/* + * Register the video devices. + * + * The driver currently supports a single video device per control interface + * only. The terminal and units must match the following structure: + * + * ITT_CAMERA -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> TT_STREAMING + * + * The Extension Units, if present, must have a single input pin. The + * Processing Unit and Extension Units can be in any order. Additional + * Extension Units connected to the main chain as single-unit branches are + * also supported. + */ +static int uvc_register_video(struct uvc_device *dev) +{ + struct video_device *vdev; + struct uvc_entity *term; + int found = 0, ret; + + /* Check if the control interface matches the structure we expect. */ + list_for_each_entry(term, &dev->entities, list) { + struct uvc_streaming *streaming; + + if (UVC_ENTITY_TYPE(term) != TT_STREAMING) + continue; + + memset(&dev->video, 0, sizeof dev->video); + mutex_init(&dev->video.ctrl_mutex); + INIT_LIST_HEAD(&dev->video.iterms); + INIT_LIST_HEAD(&dev->video.extensions); + dev->video.oterm = term; + dev->video.dev = dev; + if (uvc_scan_chain(&dev->video) < 0) + continue; + + list_for_each_entry(streaming, &dev->streaming, list) { + if (streaming->header.bTerminalLink == term->id) { + dev->video.streaming = streaming; + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) { + uvc_printk(KERN_INFO, "No valid video chain found.\n"); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) { + uvc_printk(KERN_INFO, "Found a valid video chain ("); + list_for_each_entry(term, &dev->video.iterms, chain) { + printk("%d", term->id); + if (term->chain.next != &dev->video.iterms) + printk(","); + } + printk(" -> %d).\n", dev->video.oterm->id); + } + + /* Initialize the streaming interface with default streaming + * parameters. + */ + if ((ret = uvc_video_init(&dev->video)) < 0) { + uvc_printk(KERN_ERR, "Failed to initialize the device " + "(%d).\n", ret); + return ret; + } + + /* Register the device with V4L. */ + vdev = video_device_alloc(); + if (vdev == NULL) + return -1; + + /* We already hold a reference to dev->udev. The video device will be + * unregistered before the reference is released, so we don't need to + * get another one. + */ + vdev->dev = &dev->intf->dev; + vdev->type = 0; + vdev->type2 = 0; + vdev->minor = -1; + vdev->fops = &uvc_fops; + vdev->release = video_device_release; + strncpy(vdev->name, dev->name, sizeof vdev->name); + + /* Set the driver data before calling video_register_device, otherwise + * uvc_v4l2_open might race us. + * + * FIXME: usb_set_intfdata hasn't been called so far. Is that a + * problem ? Does any function which could be called here get + * a pointer to the usb_interface ? + */ + dev->video.vdev = vdev; + video_set_drvdata(vdev, &dev->video); + + if (video_register_device(vdev, VFL_TYPE_GRABBER, -1) < 0) { + dev->video.vdev = NULL; + video_device_release(vdev); + return -1; + } + + return 0; +} + +/* + * Delete the UVC device. + * + * Called by the kernel when the last reference to the uvc_device structure + * is released. + * + * Unregistering the video devices is done here because every opened instance + * must be closed before the device can be unregistered. An alternative would + * have been to use another reference count for uvc_v4l2_open/uvc_release, and + * unregister the video devices on disconnect when that reference count drops + * to zero. + * + * As this function is called after or during disconnect(), all URBs have + * already been canceled by the USB core. There is no need to kill the + * interrupt URB manually. + */ +void uvc_delete(struct kref *kref) +{ + struct uvc_device *dev = container_of(kref, struct uvc_device, kref); + struct list_head *p, *n; + + /* Unregister the video device */ + uvc_unregister_video(dev); + usb_put_intf(dev->intf); + usb_put_dev(dev->udev); + + uvc_status_cleanup(dev); + uvc_ctrl_cleanup_device(dev); + + list_for_each_safe(p, n, &dev->entities) { + struct uvc_entity *entity; + entity = list_entry(p, struct uvc_entity, list); + kfree(entity); + } + + list_for_each_safe(p, n, &dev->streaming) { + struct uvc_streaming *streaming; + streaming = list_entry(p, struct uvc_streaming, list); + usb_driver_release_interface(&uvc_driver.driver, + streaming->intf); + usb_put_intf(streaming->intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + } + + kfree(dev); +} + +static int uvc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct uvc_device *dev; + int ret; + + if (id->idVendor && id->idProduct) + uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s " + "(%04x:%04x)\n", udev->devpath, id->idVendor, + id->idProduct); + else + uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", + udev->devpath); + + /* Allocate memory for the device and initialize it */ + if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) + return -ENOMEM; + + INIT_LIST_HEAD(&dev->entities); + INIT_LIST_HEAD(&dev->streaming); + kref_init(&dev->kref); + + dev->udev = usb_get_dev(udev); + dev->intf = usb_get_intf(intf); + dev->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + dev->quirks = id->driver_info | uvc_quirks_param; + + if (udev->product != NULL) + strncpy(dev->name, udev->product, sizeof dev->name); + else + snprintf(dev->name, sizeof dev->name, + "UVC Camera (%04x:%04x)", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + /* Parse the Video Class control descriptor */ + if (uvc_parse_control(dev) < 0) { + uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " + "descriptors.\n"); + goto error; + } + + uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + dev->uvc_version >> 8, dev->uvc_version & 0xff, + udev->product ? udev->product : "", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + if (uvc_quirks_param != 0) { + uvc_printk(KERN_INFO, "Forcing device quirks 0x%x by module " + "parameter for testing purpose.\n", uvc_quirks_param); + uvc_printk(KERN_INFO, "Please report required quirks to the " + "linux-uvc-devel mailing list.\n"); + } + + /* Initialize controls */ + if (uvc_ctrl_init_device(dev) < 0) + goto error; + + /* Register the video devices */ + if (uvc_register_video(dev) < 0) + goto error; + + /* Save our data pointer in the interface data */ + usb_set_intfdata(intf, dev); + + /* Initialize the interrupt URB */ + if ((ret = uvc_status_init(dev)) < 0) { + uvc_printk(KERN_INFO, "Unable to initialize the status " + "endpoint (%d), status interrupt will not be " + "supported.\n", ret); + } + + uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n"); + return 0; + +error: + kref_put(&dev->kref, uvc_delete); + return -ENODEV; +} + +static void uvc_disconnect(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + /* Set the USB interface data to NULL. This can be done outside the + * lock, as there's no other reader. + */ + usb_set_intfdata(intf, NULL); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOSTREAMING) + return; + + /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide + * lock is needed to prevent uvc_disconnect from releasing its + * reference to the uvc_device instance after uvc_v4l2_open() received + * the pointer to the device (video_devdata) but before it got the + * chance to increase the reference count (kref_get). + */ + mutex_lock(&uvc_driver.open_mutex); + + dev->state |= UVC_DEV_DISCONNECTED; + kref_put(&dev->kref, uvc_delete); + + mutex_unlock(&uvc_driver.open_mutex); +} + +static int uvc_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + uvc_trace(UVC_TRACE_SUSPEND, "Suspending interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + /* Controls are cached on the fly so they don't need to be saved. */ + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) + return uvc_status_suspend(dev); + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_suspend(&dev->video); +} + +static int uvc_resume(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + int ret; + + uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { + if ((ret = uvc_ctrl_resume_device(dev)) < 0) + return ret; + + return uvc_status_resume(dev); + } + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_resume(&dev->video); +} + +/* ------------------------------------------------------------------------ + * Driver initialization and cleanup + */ + +/* + * The Logitech cameras listed below have their interface class set to + * VENDOR_SPEC because they don't announce themselves as UVC devices, even + * though they are compliant. + */ +static struct usb_device_id uvc_ids[] = { + /* ALi M5606 (Clevo M540SR) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0402, + .idProduct = 0x5606, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Creative Live! Optia */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x041e, + .idProduct = 0x4057, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam NX-6000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x00f8, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam VX-7000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x0723, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Logitech Quickcam Fusion */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c1, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Orbit MP */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro for Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c3, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro 5000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c5, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Dell Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c6, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Cisco VT Camera II */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c7, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Apple Built-In iSight */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05ac, + .idProduct = 0x8501, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_BUILTIN_ISIGHT }, + /* Genesys Logic USB 2.0 PC Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Silicon Motion SM371 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x090c, + .idProduct = 0xb371, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* MT6227 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0e8d, + .idProduct = 0x0004, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Syntek (HP Spartan) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x5212, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Syntek (Asus U3S) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x8a33, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Ecamm Pico iMage */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x18cd, + .idProduct = 0xcafe, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, + /* Bodelin ProScopeHR */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_DEV_HI + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19ab, + .idProduct = 0x1000, + .bcdDevice_hi = 0x0126, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STATUS_INTERVAL }, + /* SiGma Micro USB Web Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1c4f, + .idProduct = 0x3000, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_IGNORE_SELECTOR_UNIT}, + /* Acer OEM Webcam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0100, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Packard Bell OEM Webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0101, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer Crystal Eye webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0102, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer OrbiCam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0200, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Generic USB Video Class */ + { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, + {} +}; + +MODULE_DEVICE_TABLE(usb, uvc_ids); + +struct uvc_driver uvc_driver = { + .driver = { + .name = "uvcvideo", + .probe = uvc_probe, + .disconnect = uvc_disconnect, + .suspend = uvc_suspend, + .resume = uvc_resume, + .id_table = uvc_ids, + .supports_autosuspend = 1, + }, +}; + +static int __init uvc_init(void) +{ + int result; + + INIT_LIST_HEAD(&uvc_driver.devices); + INIT_LIST_HEAD(&uvc_driver.controls); + mutex_init(&uvc_driver.open_mutex); + mutex_init(&uvc_driver.ctrl_mutex); + + uvc_ctrl_init(); + + result = usb_register(&uvc_driver.driver); + if (result == 0) + printk(KERN_INFO DRIVER_DESC " (" DRIVER_VERSION ")\n"); + return result; +} + +static void __exit uvc_cleanup(void) +{ + usb_deregister(&uvc_driver.driver); +} + +module_init(uvc_init); +module_exit(uvc_cleanup); + +module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(quirks, "Forced device quirks"); +module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(trace, "Trace level bitmask"); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c new file mode 100644 index 0000000..37bdefd --- /dev/null +++ b/drivers/media/video/uvc/uvc_isight.c @@ -0,0 +1,134 @@ +/* + * uvc_isight.c -- USB Video Class driver - iSight support + * + * Copyright (C) 2006-2007 + * Ivan N. Zlatev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include "uvcvideo.h" + +/* Built-in iSight webcams implements most of UVC 1.0 except a + * different packet format. Instead of sending a header at the + * beginning of each isochronous transfer payload, the webcam sends a + * single header per image (on its own in a packet), followed by + * packets containing data only. + * + * Offset Size (bytes) Description + * ------------------------------------------------------------------ + * 0x00 1 Header length + * 0x01 1 Flags (UVC-compliant) + * 0x02 4 Always equal to '11223344' + * 0x06 8 Always equal to 'deadbeefdeadface' + * 0x0e 16 Unknown + * + * The header can be prefixed by an optional, unknown-purpose byte. + */ + +static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf, + const __u8 *data, unsigned int len) +{ + static const __u8 hdr[] = { + 0x11, 0x22, 0x33, 0x44, + 0xde, 0xad, 0xbe, 0xef, + 0xde, 0xad, 0xfa, 0xce + }; + + unsigned int maxlen, nbytes; + __u8 *mem; + int is_header = 0; + + if (buf == NULL) + return 0; + + if ((len >= 14 && memcmp(&data[2], hdr, 12) == 0) || + (len >= 15 && memcmp(&data[3], hdr, 12) == 0)) { + uvc_trace(UVC_TRACE_FRAME, "iSight header found\n"); + is_header = 1; + } + + /* Synchronize to the input stream by waiting for a header packet. */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (!is_header) { + uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of " + "sync).\n"); + return 0; + } + + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. + */ + if (is_header && buf->buf.bytesused != 0) { + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + /* Copy the video data to the buffer. Skip header packets, as they + * contain no data. + */ + if (!is_header) { + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min(len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + if (len > maxlen || buf->buf.bytesused == buf->buf.length) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete " + "(overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } + } + + return 0; +} + +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf) +{ + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", + urb->iso_frame_desc[i].status); + } + + /* Decode the payload packet. + * uvc_video_decode is entered twice when a frame transition + * has been detected because the end of frame can only be + * reliably detected when the first packet of the new frame + * is processed. The first pass detects the transition and + * closes the previous frame's buffer, the second pass + * processes the data of the first payload of the new frame. + */ + do { + ret = isight_decode(&video->queue, buf, + urb->transfer_buffer + + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + + if (buf == NULL) + break; + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + } +} diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c new file mode 100644 index 0000000..0923f0e --- /dev/null +++ b/drivers/media/video/uvc/uvc_queue.c @@ -0,0 +1,477 @@ +/* + * uvc_queue.c -- USB Video Class driver - Buffers management + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * Video buffers queue management. + * + * Video queues is initialized by uvc_queue_init(). The function performs + * basic initialization of the uvc_video_queue struct and never fails. + * + * Video buffer allocation and freeing are performed by uvc_alloc_buffers and + * uvc_free_buffers respectively. The former acquires the video queue lock, + * while the later must be called with the lock held (so that allocation can + * free previously allocated buffers). Trying to free buffers that are mapped + * to user space will return -EBUSY. + * + * Video buffers are managed using two queues. However, unlike most USB video + * drivers which use an in queue and an out queue, we use a main queue which + * holds all queued buffers (both 'empty' and 'done' buffers), and an irq + * queue which holds empty buffers. This design (copied from video-buf) + * minimizes locking in interrupt, as only one queue is shared between + * interrupt and user contexts. + * + * Use cases + * --------- + * + * Unless stated otherwise, all operations which modify the irq buffers queue + * are protected by the irq spinlock. + * + * 1. The user queues the buffers, starts streaming and dequeues a buffer. + * + * The buffers are added to the main and irq queues. Both operations are + * protected by the queue lock, and the latert is protected by the irq + * spinlock as well. + * + * The completion handler fetches a buffer from the irq queue and fills it + * with video data. If no buffer is available (irq queue empty), the handler + * returns immediately. + * + * When the buffer is full, the completion handler removes it from the irq + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * At that point, any process waiting on the buffer will be woken up. If a + * process tries to dequeue a buffer after it has been marked ready, the + * dequeing will succeed immediately. + * + * 2. Buffers are queued, user is waiting on a buffer and the device gets + * disconnected. + * + * When the device is disconnected, the kernel calls the completion handler + * with an appropriate status code. The handler marks all buffers in the + * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so + * that any process waiting on a buffer gets woken up. + * + * Waking up up the first buffer on the irq list is not enough, as the + * process waiting on the buffer might restart the dequeue operation + * immediately. + * + */ + +void uvc_queue_init(struct uvc_video_queue *queue) +{ + mutex_init(&queue->mutex); + spin_lock_init(&queue->irqlock); + INIT_LIST_HEAD(&queue->mainqueue); + INIT_LIST_HEAD(&queue->irqqueue); +} + +/* + * Allocate the video buffers. + * + * Pages are reserved to make sure they will not be swaped, as they will be + * filled in URB completion handler. + * + * Buffers will be individually mapped, so they must all be page aligned. + */ +int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, + unsigned int buflength) +{ + unsigned int bufsize = PAGE_ALIGN(buflength); + unsigned int i; + void *mem = NULL; + int ret; + + if (nbuffers > UVC_MAX_VIDEO_BUFFERS) + nbuffers = UVC_MAX_VIDEO_BUFFERS; + + mutex_lock(&queue->mutex); + + if ((ret = uvc_free_buffers(queue)) < 0) + goto done; + + /* Bail out if no buffers should be allocated. */ + if (nbuffers == 0) + goto done; + + /* Decrement the number of buffers until allocation succeeds. */ + for (; nbuffers > 0; --nbuffers) { + mem = vmalloc_32(nbuffers * bufsize); + if (mem != NULL) + break; + } + + if (mem == NULL) { + ret = -ENOMEM; + goto done; + } + + for (i = 0; i < nbuffers; ++i) { + memset(&queue->buffer[i], 0, sizeof queue->buffer[i]); + queue->buffer[i].buf.index = i; + queue->buffer[i].buf.m.offset = i * bufsize; + queue->buffer[i].buf.length = buflength; + queue->buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + queue->buffer[i].buf.sequence = 0; + queue->buffer[i].buf.field = V4L2_FIELD_NONE; + queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP; + queue->buffer[i].buf.flags = 0; + init_waitqueue_head(&queue->buffer[i].wait); + } + + queue->mem = mem; + queue->count = nbuffers; + queue->buf_size = bufsize; + ret = nbuffers; + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Free the video buffers. + * + * This function must be called with the queue lock held. + */ +int uvc_free_buffers(struct uvc_video_queue *queue) +{ + unsigned int i; + + for (i = 0; i < queue->count; ++i) { + if (queue->buffer[i].vma_use_count != 0) + return -EBUSY; + } + + if (queue->count) { + vfree(queue->mem); + queue->count = 0; + } + + return 0; +} + +static void __uvc_query_buffer(struct uvc_buffer *buf, + struct v4l2_buffer *v4l2_buf) +{ + memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf); + + if (buf->vma_use_count) + v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED; + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + case UVC_BUF_STATE_DONE: + v4l2_buf->flags |= V4L2_BUF_FLAG_DONE; + break; + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; + break; + case UVC_BUF_STATE_IDLE: + default: + break; + } +} + +int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + int ret = 0; + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + ret = -EINVAL; + goto done; + } + + __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Queue a video buffer. Attempting to queue a buffer that has already been + * queued will return -EINVAL. + */ +int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + struct uvc_buffer *buf; + unsigned long flags; + int ret = 0; + + uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index); + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); + ret = -EINVAL; + goto done; + } + + buf = &queue->buffer[v4l2_buf->index]; + if (buf->state != UVC_BUF_STATE_IDLE) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state " + "(%u).\n", buf->state); + ret = -EINVAL; + goto done; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (queue->flags & UVC_QUEUE_DISCONNECTED) { + spin_unlock_irqrestore(&queue->irqlock, flags); + ret = -ENODEV; + goto done; + } + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + list_add_tail(&buf->stream, &queue->mainqueue); + list_add_tail(&buf->queue, &queue->irqqueue); + spin_unlock_irqrestore(&queue->irqlock, flags); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) +{ + if (nonblocking) { + return (buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE) + ? 0 : -EAGAIN; + } + + return wait_event_interruptible(buf->wait, + buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE); +} + +/* + * Dequeue a video buffer. If nonblocking is false, block until a buffer is + * available. + */ +int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking) +{ + struct uvc_buffer *buf; + int ret = 0; + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n"); + ret = -EINVAL; + goto done; + } + + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0) + goto done; + + uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n", + buf->buf.index, buf->state, buf->buf.bytesused); + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data " + "(transmission error).\n"); + ret = -EIO; + case UVC_BUF_STATE_DONE: + buf->state = UVC_BUF_STATE_IDLE; + break; + + case UVC_BUF_STATE_IDLE: + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + default: + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " + "(driver bug?).\n", buf->state); + ret = -EINVAL; + goto done; + } + + list_del(&buf->stream); + __uvc_query_buffer(buf, v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Poll the video queue. + * + * This function implements video queue polling and is intended to be used by + * the device poll handler. + */ +unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, + poll_table *wait) +{ + struct uvc_buffer *buf; + unsigned int mask = 0; + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + mask |= POLLERR; + goto done; + } + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + + poll_wait(file, &buf->wait, wait); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + mask |= POLLIN | POLLRDNORM; + +done: + mutex_unlock(&queue->mutex); + return mask; +} + +/* + * Enable or disable the video buffers queue. + * + * The queue must be enabled before starting video acquisition and must be + * disabled after stopping it. This ensures that the video buffers queue + * state can be properly initialized before buffers are accessed from the + * interrupt handler. + * + * Enabling the video queue initializes parameters (such as sequence number, + * sync pattern, ...). If the queue is already enabled, return -EBUSY. + * + * Disabling the video queue cancels the queue and removes all buffers from + * the main queue. + * + * This function can't be called from interrupt context. Use + * uvc_queue_cancel() instead. + */ +int uvc_queue_enable(struct uvc_video_queue *queue, int enable) +{ + unsigned int i; + int ret = 0; + + mutex_lock(&queue->mutex); + if (enable) { + if (uvc_queue_streaming(queue)) { + ret = -EBUSY; + goto done; + } + queue->sequence = 0; + queue->flags |= UVC_QUEUE_STREAMING; + } else { + uvc_queue_cancel(queue, 0); + INIT_LIST_HEAD(&queue->mainqueue); + + for (i = 0; i < queue->count; ++i) + queue->buffer[i].state = UVC_BUF_STATE_IDLE; + + queue->flags &= ~UVC_QUEUE_STREAMING; + } + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Cancel the video buffers queue. + * + * Cancelling the queue marks all buffers on the irq queue as erroneous, + * wakes them up and remove them from the queue. + * + * If the disconnect parameter is set, further calls to uvc_queue_buffer will + * fail with -ENODEV. + * + * This function acquires the irq spinlock and can be called from interrupt + * context. + */ +void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) +{ + struct uvc_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&queue->irqlock, flags); + while (!list_empty(&queue->irqqueue)) { + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + list_del(&buf->queue); + buf->state = UVC_BUF_STATE_ERROR; + wake_up(&buf->wait); + } + /* This must be protected by the irqlock spinlock to avoid race + * conditions between uvc_queue_buffer and the disconnection event that + * could result in an interruptible wait in uvc_dequeue_buffer. Do not + * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED + * state outside the queue code. + */ + if (disconnect) + queue->flags |= UVC_QUEUE_DISCONNECTED; + spin_unlock_irqrestore(&queue->irqlock, flags); +} + +struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf) +{ + struct uvc_buffer *nextbuf; + unsigned long flags; + + if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) && + buf->buf.length != buf->buf.bytesused) { + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + return buf; + } + + spin_lock_irqsave(&queue->irqlock, flags); + list_del(&buf->queue); + if (!list_empty(&queue->irqqueue)) + nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + else + nextbuf = NULL; + spin_unlock_irqrestore(&queue->irqlock, flags); + + buf->buf.sequence = queue->sequence++; + do_gettimeofday(&buf->buf.timestamp); + + wake_up(&buf->wait); + return nextbuf; +} diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c new file mode 100644 index 0000000..be9084e --- /dev/null +++ b/drivers/media/video/uvc/uvc_status.c @@ -0,0 +1,207 @@ +/* + * uvc_status.c -- USB Video Class driver - Status endpoint + * + * Copyright (C) 2007-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +/* -------------------------------------------------------------------------- + * Input device + */ +static int uvc_input_init(struct uvc_device *dev) +{ + struct usb_device *udev = dev->udev; + struct input_dev *input; + char *phys = NULL; + int ret; + + input = input_allocate_device(); + if (input == NULL) + return -ENOMEM; + + phys = kmalloc(6 + strlen(udev->bus->bus_name) + strlen(udev->devpath), + GFP_KERNEL); + if (phys == NULL) { + ret = -ENOMEM; + goto error; + } + sprintf(phys, "usb-%s-%s", udev->bus->bus_name, udev->devpath); + + input->name = dev->name; + input->phys = phys; + usb_to_input_id(udev, &input->id); + input->dev.parent = &dev->intf->dev; + + set_bit(EV_KEY, input->evbit); + set_bit(BTN_0, input->keybit); + + if ((ret = input_register_device(input)) < 0) + goto error; + + dev->input = input; + return 0; + +error: + input_free_device(input); + kfree(phys); + return ret; +} + +static void uvc_input_cleanup(struct uvc_device *dev) +{ + if (dev->input) + input_unregister_device(dev->input); +} + +/* -------------------------------------------------------------------------- + * Status interrupt endpoint + */ +static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len) +{ + if (len < 3) { + uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event " + "received.\n"); + return; + } + + if (data[2] == 0) { + if (len < 4) + return; + uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n", + data[1], data[3] ? "pressed" : "released", len); + if (dev->input) + input_report_key(dev->input, BTN_0, data[3]); + } else { + uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x " + "len %d.\n", data[1], data[2], data[3], len); + } +} + +static void uvc_event_control(struct uvc_device *dev, __u8 *data, int len) +{ + char *attrs[3] = { "value", "info", "failure" }; + + if (len < 6 || data[2] != 0 || data[4] > 2) { + uvc_trace(UVC_TRACE_STATUS, "Invalid control status event " + "received.\n"); + return; + } + + uvc_trace(UVC_TRACE_STATUS, "Control %u/%u %s change len %d.\n", + data[1], data[3], attrs[data[4]], len); +} + +static void uvc_status_complete(struct urb *urb) +{ + struct uvc_device *dev = urb->context; + int len, ret; + + switch (urb->status) { + case 0: + break; + + case -ENOENT: /* usb_kill_urb() called. */ + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + case -EPROTO: /* Device is disconnected (reported by some + * host controller). */ + return; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in status " + "completion handler.\n", urb->status); + return; + } + + len = urb->actual_length; + if (len > 0) { + switch (dev->status[0] & 0x0f) { + case UVC_STATUS_TYPE_CONTROL: + uvc_event_control(dev, dev->status, len); + break; + + case UVC_STATUS_TYPE_STREAMING: + uvc_event_streaming(dev, dev->status, len); + break; + + default: + uvc_printk(KERN_INFO, "unknown event type %u.\n", + dev->status[0]); + break; + } + } + + /* Resubmit the URB. */ + urb->interval = dev->int_ep->desc.bInterval; + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit status URB (%d).\n", + ret); + } +} + +int uvc_status_init(struct uvc_device *dev) +{ + struct usb_host_endpoint *ep = dev->int_ep; + unsigned int pipe; + int interval; + + if (ep == NULL) + return 0; + + uvc_input_init(dev); + + dev->int_urb = usb_alloc_urb(0, GFP_KERNEL); + if (dev->int_urb == NULL) + return -ENOMEM; + + pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); + + /* For high-speed interrupt endpoints, the bInterval value is used as + * an exponent of two. Some developers forgot about it. + */ + interval = ep->desc.bInterval; + if (interval > 16 && dev->udev->speed == USB_SPEED_HIGH && + (dev->quirks & UVC_QUIRK_STATUS_INTERVAL)) + interval = fls(interval) - 1; + + usb_fill_int_urb(dev->int_urb, dev->udev, pipe, + dev->status, sizeof dev->status, uvc_status_complete, + dev, interval); + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} + +void uvc_status_cleanup(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + usb_free_urb(dev->int_urb); + uvc_input_cleanup(dev); +} + +int uvc_status_suspend(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + return 0; +} + +int uvc_status_resume(struct uvc_device *dev) +{ + if (dev->int_urb == NULL) + return 0; + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c new file mode 100644 index 0000000..2e0a665 --- /dev/null +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -0,0 +1,1105 @@ +/* + * uvc_v4l2.c -- USB Video Class driver - V4L2 API + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * V4L2 interface + */ + +/* + * Mapping V4L2 controls to UVC controls can be straighforward if done well. + * Most of the UVC controls exist in V4L2, and can be mapped directly. Some + * must be grouped (for instance the Red Balance, Blue Balance and Do White + * Balance V4L2 controls use the White Balance Component UVC control) or + * otherwise translated. The approach we take here is to use a translation + * table for the controls which can be mapped directly, and handle the others + * manually. + */ +static int uvc_v4l2_query_menu(struct uvc_video_device *video, + struct v4l2_querymenu *query_menu) +{ + struct uvc_menu_info *menu_info; + struct uvc_control_mapping *mapping; + struct uvc_control *ctrl; + + ctrl = uvc_find_control(video, query_menu->id, &mapping); + if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) + return -EINVAL; + + if (query_menu->index >= mapping->menu_count) + return -EINVAL; + + menu_info = &mapping->menu_info[query_menu->index]; + strncpy(query_menu->name, menu_info->name, 32); + return 0; +} + +/* + * Find the frame interval closest to the requested frame interval for the + * given frame format and size. This should be done by the device as part of + * the Video Probe and Commit negotiation, but some hardware don't implement + * that feature. + */ +static __u32 uvc_try_frame_interval(struct uvc_frame *frame, __u32 interval) +{ + unsigned int i; + + if (frame->bFrameIntervalType) { + __u32 best = -1, dist; + + for (i = 0; i < frame->bFrameIntervalType; ++i) { + dist = interval > frame->dwFrameInterval[i] + ? interval - frame->dwFrameInterval[i] + : frame->dwFrameInterval[i] - interval; + + if (dist > best) + break; + + best = dist; + } + + interval = frame->dwFrameInterval[i-1]; + } else { + const __u32 min = frame->dwFrameInterval[0]; + const __u32 max = frame->dwFrameInterval[1]; + const __u32 step = frame->dwFrameInterval[2]; + + interval = min + (interval - min + step/2) / step * step; + if (interval > max) + interval = max; + } + + return interval; +} + +static int uvc_v4l2_try_format(struct uvc_video_device *video, + struct v4l2_format *fmt, struct uvc_streaming_control *probe, + struct uvc_format **uvc_format, struct uvc_frame **uvc_frame) +{ + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + __u16 rw, rh; + unsigned int d, maxd; + unsigned int i; + __u32 interval; + int ret = 0; + __u8 *fcc; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + fcc = (__u8 *)&fmt->fmt.pix.pixelformat; + uvc_trace(UVC_TRACE_FORMAT, "Trying format 0x%08x (%c%c%c%c): %ux%u.\n", + fmt->fmt.pix.pixelformat, + fcc[0], fcc[1], fcc[2], fcc[3], + fmt->fmt.pix.width, fmt->fmt.pix.height); + + /* Check if the hardware supports the requested format. */ + for (i = 0; i < video->streaming->nformats; ++i) { + format = &video->streaming->format[i]; + if (format->fcc == fmt->fmt.pix.pixelformat) + break; + } + + if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported format 0x%08x.\n", + fmt->fmt.pix.pixelformat); + return -EINVAL; + } + + /* Find the closest image size. The distance between image sizes is + * the size in pixels of the non-overlapping regions between the + * requested size and the frame-specified size. + */ + rw = fmt->fmt.pix.width; + rh = fmt->fmt.pix.height; + maxd = (unsigned int)-1; + + for (i = 0; i < format->nframes; ++i) { + __u16 w = format->frame[i].wWidth; + __u16 h = format->frame[i].wHeight; + + d = min(w, rw) * min(h, rh); + d = w*h + rw*rh - 2*d; + if (d < maxd) { + maxd = d; + frame = &format->frame[i]; + } + + if (maxd == 0) + break; + } + + if (frame == NULL) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported size %ux%u.\n", + fmt->fmt.pix.width, fmt->fmt.pix.height); + return -EINVAL; + } + + /* Use the default frame interval. */ + interval = frame->dwDefaultFrameInterval; + uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us " + "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval, + (100000000/interval)%10); + + /* Set the format index, frame index and frame interval. */ + memset(probe, 0, sizeof *probe); + probe->bmHint = 1; /* dwFrameInterval */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + probe->dwFrameInterval = uvc_try_frame_interval(frame, interval); + /* Some webcams stall the probe control set request when the + * dwMaxVideoFrameSize field is set to zero. The UVC specification + * clearly states that the field is read-only from the host, so this + * is a webcam bug. Set dwMaxVideoFrameSize to the value reported by + * the webcam to work around the problem. + * + * The workaround could probably be enabled for all webcams, so the + * quirk can be removed if needed. It's currently useful to detect + * webcam bugs and fix them before they hit the market (providing + * developers test their webcams with the Linux driver as well as with + * the Windows driver). + */ + if (video->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS) + probe->dwMaxVideoFrameSize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + /* Probe the device */ + if ((ret = uvc_probe_video(video, probe)) < 0) + goto done; + + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + if (uvc_format != NULL) + *uvc_format = format; + if (uvc_frame != NULL) + *uvc_frame = frame; + +done: + return ret; +} + +static int uvc_v4l2_get_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_format *format = video->streaming->cur_format; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (format == NULL || frame == NULL) + return -EINVAL; + + fmt->fmt.pix.pixelformat = format->fcc; + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = video->streaming->ctrl.dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + return 0; +} + +static int uvc_v4l2_set_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_streaming_control probe; + struct uvc_format *format; + struct uvc_frame *frame; + int ret; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame); + if (ret < 0) + return ret; + + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + + return 0; +} + +static int uvc_v4l2_get_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + uint32_t numerator, denominator; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + numerator = video->streaming->ctrl.dwFrameInterval; + denominator = 10000000; + uvc_simplify_fraction(&numerator, &denominator, 8, 333); + + memset(parm, 0, sizeof *parm); + parm->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; + parm->parm.capture.capturemode = 0; + parm->parm.capture.timeperframe.numerator = numerator; + parm->parm.capture.timeperframe.denominator = denominator; + parm->parm.capture.extendedmode = 0; + parm->parm.capture.readbuffers = 0; + + return 0; +} + +static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + struct uvc_frame *frame = video->streaming->cur_frame; + struct uvc_streaming_control probe; + uint32_t interval; + int ret; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + memcpy(&probe, &video->streaming->ctrl, sizeof probe); + interval = uvc_fraction_to_interval( + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator); + + uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n", + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator, + interval); + probe.dwFrameInterval = uvc_try_frame_interval(frame, interval); + + /* Probe the device with the new settings. */ + if ((ret = uvc_probe_video(video, &probe)) < 0) + return ret; + + /* Commit the new settings. */ + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + + /* Return the actual frame period. */ + parm->parm.capture.timeperframe.numerator = probe.dwFrameInterval; + parm->parm.capture.timeperframe.denominator = 10000000; + uvc_simplify_fraction(&parm->parm.capture.timeperframe.numerator, + &parm->parm.capture.timeperframe.denominator, + 8, 333); + + return 0; +} + +/* ------------------------------------------------------------------------ + * Privilege management + */ + +/* + * Privilege management is the multiple-open implementation basis. The current + * implementation is completely transparent for the end-user and doesn't + * require explicit use of the VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY ioctls. + * Those ioctls enable finer control on the device (by making possible for a + * user to request exclusive access to a device), but are not mature yet. + * Switching to the V4L2 priority mechanism might be considered in the future + * if this situation changes. + * + * Each open instance of a UVC device can either be in a privileged or + * unprivileged state. Only a single instance can be in a privileged state at + * a given time. Trying to perform an operation which requires privileges will + * automatically acquire the required privileges if possible, or return -EBUSY + * otherwise. Privileges are dismissed when closing the instance. + * + * Operations which require privileges are: + * + * - VIDIOC_S_INPUT + * - VIDIOC_S_PARM + * - VIDIOC_S_FMT + * - VIDIOC_TRY_FMT + * - VIDIOC_REQBUFS + */ +static int uvc_acquire_privileges(struct uvc_fh *handle) +{ + int ret = 0; + + /* Always succeed if the handle is already privileged. */ + if (handle->state == UVC_HANDLE_ACTIVE) + return 0; + + /* Check if the device already has a privileged handle. */ + mutex_lock(&uvc_driver.open_mutex); + if (atomic_inc_return(&handle->device->active) != 1) { + atomic_dec(&handle->device->active); + ret = -EBUSY; + goto done; + } + + handle->state = UVC_HANDLE_ACTIVE; + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static void uvc_dismiss_privileges(struct uvc_fh *handle) +{ + if (handle->state == UVC_HANDLE_ACTIVE) + atomic_dec(&handle->device->active); + + handle->state = UVC_HANDLE_PASSIVE; +} + +static int uvc_has_privileges(struct uvc_fh *handle) +{ + return handle->state == UVC_HANDLE_ACTIVE; +} + +/* ------------------------------------------------------------------------ + * V4L2 file operations + */ + +static int uvc_v4l2_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev; + struct uvc_video_device *video; + struct uvc_fh *handle; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n"); + mutex_lock(&uvc_driver.open_mutex); + vdev = video_devdata(file); + video = video_get_drvdata(vdev); + + if (video->dev->state & UVC_DEV_DISCONNECTED) { + ret = -ENODEV; + goto done; + } + + ret = usb_autopm_get_interface(video->dev->intf); + if (ret < 0) + goto done; + + /* Create the device handle. */ + handle = kzalloc(sizeof *handle, GFP_KERNEL); + if (handle == NULL) { + usb_autopm_put_interface(video->dev->intf); + ret = -ENOMEM; + goto done; + } + + handle->device = video; + handle->state = UVC_HANDLE_PASSIVE; + file->private_data = handle; + + kref_get(&video->dev->kref); + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static int uvc_v4l2_release(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n"); + + /* Only free resources if this is a privileged handle. */ + if (uvc_has_privileges(handle)) { + uvc_video_enable(video, 0); + + mutex_lock(&video->queue.mutex); + if (uvc_free_buffers(&video->queue) < 0) + uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to " + "free buffers.\n"); + mutex_unlock(&video->queue.mutex); + } + + /* Release the file handle. */ + uvc_dismiss_privileges(handle); + kfree(handle); + file->private_data = NULL; + + usb_autopm_put_interface(video->dev->intf); + kref_put(&video->dev->kref, uvc_delete); + return 0; +} + +static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + int ret = 0; + + if (uvc_trace_param & UVC_TRACE_IOCTL) + v4l_printk_ioctl(cmd); + + switch (cmd) { + /* Query capabilities */ + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = arg; + + memset(cap, 0, sizeof *cap); + strncpy(cap->driver, "uvcvideo", sizeof cap->driver); + strncpy(cap->card, vdev->name, 32); + strncpy(cap->bus_info, video->dev->udev->bus->bus_name, + sizeof cap->bus_info); + cap->version = DRIVER_VERSION_NUMBER; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE + | V4L2_CAP_STREAMING; + break; + } + + /* Get, Set & Query control */ + case VIDIOC_QUERYCTRL: + return uvc_query_v4l2_ctrl(video, arg); + + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_get(video, &xctrl); + uvc_ctrl_rollback(video); + if (ret >= 0) + ctrl->value = xctrl.value; + break; + } + + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + xctrl.value = ctrl->value; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_set(video, &xctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + return ret; + } + ret = uvc_ctrl_commit(video); + break; + } + + case VIDIOC_QUERYMENU: + return uvc_v4l2_query_menu(video, arg); + + case VIDIOC_G_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + uvc_ctrl_begin(video); + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_get(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + ctrls->error_idx = 0; + ret = uvc_ctrl_rollback(video); + break; + } + + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_TRY_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_set(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + + ctrls->error_idx = 0; + + if (cmd == VIDIOC_S_EXT_CTRLS) + ret = uvc_ctrl_commit(video); + else + ret = uvc_ctrl_rollback(video); + break; + } + + /* Get, Set & Enum input */ + case VIDIOC_ENUMINPUT: + { + const struct uvc_entity *selector = video->selector; + struct v4l2_input *input = arg; + struct uvc_entity *iterm = NULL; + u32 index = input->index; + int pin = 0; + + if (selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (index != 0) + return -EINVAL; + iterm = list_first_entry(&video->iterms, + struct uvc_entity, chain); + pin = iterm->id; + } else if (pin < selector->selector.bNrInPins) { + pin = selector->selector.baSourceID[index]; + list_for_each_entry(iterm, video->iterms.next, chain) { + if (iterm->id == pin) + break; + } + } + + if (iterm == NULL || iterm->id != pin) + return -EINVAL; + + memset(input, 0, sizeof *input); + input->index = index; + strncpy(input->name, iterm->name, sizeof input->name); + if (UVC_ENTITY_TYPE(iterm) == ITT_CAMERA) + input->type = V4L2_INPUT_TYPE_CAMERA; + break; + } + + case VIDIOC_G_INPUT: + { + u8 input; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + *(int *)arg = 0; + break; + } + + ret = uvc_query_ctrl(video->dev, GET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + if (ret < 0) + return ret; + + *(int *)arg = input - 1; + break; + } + + case VIDIOC_S_INPUT: + { + u8 input = *(u32 *)arg + 1; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (input != 1) + return -EINVAL; + break; + } + + if (input > video->selector->selector.bNrInPins) + return -EINVAL; + + return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + } + + /* Try, Get, Set & Enum format */ + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *fmt = arg; + struct uvc_format *format; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fmt->index >= video->streaming->nformats) + return -EINVAL; + + format = &video->streaming->format[fmt->index]; + fmt->flags = 0; + if (format->flags & UVC_FMT_FLAG_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + strncpy(fmt->description, format->name, + sizeof fmt->description); + fmt->description[sizeof fmt->description - 1] = 0; + fmt->pixelformat = format->fcc; + break; + } + + case VIDIOC_TRY_FMT: + { + struct uvc_streaming_control probe; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_try_format(video, arg, &probe, NULL, NULL); + } + + case VIDIOC_S_FMT: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_format(video, arg); + + case VIDIOC_G_FMT: + return uvc_v4l2_get_format(video, arg); + + /* Frame size enumeration */ + case VIDIOC_ENUM_FRAMESIZES: + { + struct v4l2_frmsizeenum *fsize = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame; + int i; + + /* Look for the given pixel format */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fsize->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + if (fsize->index >= format->nframes) + return -EINVAL; + + frame = &format->frame[fsize->index]; + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = frame->wWidth; + fsize->discrete.height = frame->wHeight; + break; + } + + /* Frame interval enumeration */ + case VIDIOC_ENUM_FRAMEINTERVALS: + { + struct v4l2_frmivalenum *fival = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + int i; + + /* Look for the given pixel format and frame size */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fival->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + for (i = 0; i < format->nframes; i++) { + if (format->frame[i].wWidth == fival->width && + format->frame[i].wHeight == fival->height) { + frame = &format->frame[i]; + break; + } + } + if (frame == NULL) + return -EINVAL; + + if (frame->bFrameIntervalType) { + if (fival->index >= frame->bFrameIntervalType) + return -EINVAL; + + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete.numerator = + frame->dwFrameInterval[fival->index]; + fival->discrete.denominator = 10000000; + uvc_simplify_fraction(&fival->discrete.numerator, + &fival->discrete.denominator, 8, 333); + } else { + fival->type = V4L2_FRMIVAL_TYPE_STEPWISE; + fival->stepwise.min.numerator = + frame->dwFrameInterval[0]; + fival->stepwise.min.denominator = 10000000; + fival->stepwise.max.numerator = + frame->dwFrameInterval[1]; + fival->stepwise.max.denominator = 10000000; + fival->stepwise.step.numerator = + frame->dwFrameInterval[2]; + fival->stepwise.step.denominator = 10000000; + uvc_simplify_fraction(&fival->stepwise.min.numerator, + &fival->stepwise.min.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.max.numerator, + &fival->stepwise.max.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.step.numerator, + &fival->stepwise.step.denominator, 8, 333); + } + break; + } + + /* Get & Set streaming parameters */ + case VIDIOC_G_PARM: + return uvc_v4l2_get_streamparm(video, arg); + + case VIDIOC_S_PARM: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_streamparm(video, arg); + + /* Cropping and scaling */ + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *ccap = arg; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (ccap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + ccap->bounds.left = 0; + ccap->bounds.top = 0; + ccap->bounds.width = frame->wWidth; + ccap->bounds.height = frame->wHeight; + + ccap->defrect = ccap->bounds; + + ccap->pixelaspect.numerator = 1; + ccap->pixelaspect.denominator = 1; + break; + } + + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + return -EINVAL; + + /* Buffers & streaming */ + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *rb = arg; + unsigned int bufsize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + ret = uvc_alloc_buffers(&video->queue, rb->count, bufsize); + if (ret < 0) + return ret; + + if (!(video->streaming->cur_format->flags & + UVC_FMT_FLAG_COMPRESSED)) + video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; + + rb->count = ret; + ret = 0; + break; + } + + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *buf = arg; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_query_buffer(&video->queue, buf); + } + + case VIDIOC_QBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_queue_buffer(&video->queue, arg); + + case VIDIOC_DQBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_dequeue_buffer(&video->queue, arg, + file->f_flags & O_NONBLOCK); + + case VIDIOC_STREAMON: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + if ((ret = uvc_video_enable(video, 1)) < 0) + return ret; + break; + } + + case VIDIOC_STREAMOFF: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_video_enable(video, 0); + } + + /* Analog video standards make no sense for digital cameras. */ + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYSTD: + case VIDIOC_G_STD: + case VIDIOC_S_STD: + + case VIDIOC_OVERLAY: + + case VIDIOC_ENUMAUDIO: + case VIDIOC_ENUMAUDOUT: + + case VIDIOC_ENUMOUTPUT: + uvc_trace(UVC_TRACE_IOCTL, "Unsupported ioctl 0x%08x\n", cmd); + return -EINVAL; + + /* Dynamic controls. */ + case UVCIOC_CTRL_ADD: + { + struct uvc_xu_control_info *xinfo = arg; + struct uvc_control_info *info; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + info = kmalloc(sizeof *info, GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + memcpy(info->entity, xinfo->entity, sizeof info->entity); + info->index = xinfo->index; + info->selector = xinfo->selector; + info->size = xinfo->size; + info->flags = xinfo->flags; + + info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX | + UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF; + + ret = uvc_ctrl_add_info(info); + if (ret < 0) + kfree(info); + break; + } + + case UVCIOC_CTRL_MAP: + { + struct uvc_xu_control_mapping *xmap = arg; + struct uvc_control_mapping *map; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + map = kmalloc(sizeof *map, GFP_KERNEL); + if (map == NULL) + return -ENOMEM; + + map->id = xmap->id; + memcpy(map->name, xmap->name, sizeof map->name); + memcpy(map->entity, xmap->entity, sizeof map->entity); + map->selector = xmap->selector; + map->size = xmap->size; + map->offset = xmap->offset; + map->v4l2_type = xmap->v4l2_type; + map->data_type = xmap->data_type; + + ret = uvc_ctrl_add_mapping(map); + if (ret < 0) + kfree(map); + break; + } + + case UVCIOC_CTRL_GET: + return uvc_xu_ctrl_query(video, arg, 0); + + case UVCIOC_CTRL_SET: + return uvc_xu_ctrl_query(video, arg, 1); + + default: + if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg, + uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) + uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", + cmd); + return ret; + } + + return ret; +} + +static int uvc_v4l2_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_ioctl\n"); + return video_usercopy(inode, file, cmd, arg, uvc_v4l2_do_ioctl); +} + +static ssize_t uvc_v4l2_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_read: not implemented.\n"); + return -ENODEV; +} + +/* + * VMA operations. + */ +static void uvc_vm_open(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count++; +} + +static void uvc_vm_close(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count--; +} + +static struct vm_operations_struct uvc_vm_ops = { + .open = uvc_vm_open, + .close = uvc_vm_close, +}; + +static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_buffer *buffer; + struct page *page; + unsigned long addr, start, size; + unsigned int i; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n"); + + start = vma->vm_start; + size = vma->vm_end - vma->vm_start; + + mutex_lock(&video->queue.mutex); + + for (i = 0; i < video->queue.count; ++i) { + buffer = &video->queue.buffer[i]; + if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) + break; + } + + if (i == video->queue.count || size != video->queue.buf_size) { + ret = -EINVAL; + goto done; + } + + /* + * VM_IO marks the area as being an mmaped region for I/O to a + * device. It also prevents the region from being core dumped. + */ + vma->vm_flags |= VM_IO; + + addr = (unsigned long)video->queue.mem + buffer->buf.m.offset; + while (size > 0) { + page = vmalloc_to_page((void *)addr); + if ((ret = vm_insert_page(vma, start, page)) < 0) + goto done; + + start += PAGE_SIZE; + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &uvc_vm_ops; + vma->vm_private_data = buffer; + uvc_vm_open(vma); + +done: + mutex_unlock(&video->queue.mutex); + return ret; +} + +static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n"); + + return uvc_queue_poll(&video->queue, file, wait); +} + +struct file_operations uvc_fops = { + .owner = THIS_MODULE, + .open = uvc_v4l2_open, + .release = uvc_v4l2_release, + .ioctl = uvc_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, + .read = uvc_v4l2_read, + .mmap = uvc_v4l2_mmap, + .poll = uvc_v4l2_poll, +}; diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c new file mode 100644 index 0000000..6faf1fb --- /dev/null +++ b/drivers/media/video/uvc/uvc_video.c @@ -0,0 +1,934 @@ +/* + * uvc_video.c -- USB Video Class driver - Video handling + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static int __uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size, + int timeout) +{ + __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE; + unsigned int pipe; + int ret; + + pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0) + : usb_sndctrlpipe(dev->udev, 0); + type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT; + + ret = usb_control_msg(dev->udev, pipe, query, type, cs << 8, + unit << 8 | intfnum, data, size, timeout); + + if (ret != size) { + uvc_printk(KERN_ERR, "Failed to query (%u) UVC control %u " + "(unit %u) : %d (exp. %u).\n", query, cs, unit, ret, + size); + return -EIO; + } + + return 0; +} + +int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size) +{ + return __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size, + UVC_CTRL_CONTROL_TIMEOUT); +} + +static void uvc_fixup_buffer_size(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl) +{ + struct uvc_format *format; + struct uvc_frame *frame; + + if (ctrl->bFormatIndex <= 0 || + ctrl->bFormatIndex > video->streaming->nformats) + return; + + format = &video->streaming->format[ctrl->bFormatIndex - 1]; + + if (ctrl->bFrameIndex <= 0 || + ctrl->bFrameIndex > format->nframes) + return; + + frame = &format->frame[ctrl->bFrameIndex - 1]; + + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) || + (ctrl->dwMaxVideoFrameSize == 0 && + video->dev->uvc_version < 0x0110)) + ctrl->dwMaxVideoFrameSize = + frame->dwMaxVideoFrameBufferSize; +} + +static int uvc_get_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe, __u8 query) +{ + __u8 data[34]; + __u8 size; + int ret; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); + + if (ret < 0) + return ret; + + ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]); + ctrl->bFormatIndex = data[2]; + ctrl->bFrameIndex = data[3]; + ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]); + ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]); + ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]); + ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]); + ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]); + ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]); + ctrl->dwMaxVideoFrameSize = + le32_to_cpu(get_unaligned((__le32 *)&data[18])); + ctrl->dwMaxPayloadTransferSize = + le32_to_cpu(get_unaligned((__le32 *)&data[22])); + + if (size == 34) { + ctrl->dwClockFrequency = + le32_to_cpu(get_unaligned((__le32 *)&data[26])); + ctrl->bmFramingInfo = data[30]; + ctrl->bPreferedVersion = data[31]; + ctrl->bMinVersion = data[32]; + ctrl->bMaxVersion = data[33]; + } else { + ctrl->dwClockFrequency = video->dev->clock_frequency; + ctrl->bmFramingInfo = 0; + ctrl->bPreferedVersion = 0; + ctrl->bMinVersion = 0; + ctrl->bMaxVersion = 0; + } + + /* Some broken devices return a null or wrong dwMaxVideoFrameSize. + * Try to get the value from the format and frame descriptor. + */ + uvc_fixup_buffer_size(video, ctrl); + + return 0; +} + +int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe) +{ + __u8 data[34]; + __u8 size; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + memset(data, 0, sizeof data); + + *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint); + data[2] = ctrl->bFormatIndex; + data[3] = ctrl->bFrameIndex; + *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval); + *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate); + *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate); + *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); + *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); + *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); + /* Note: Some of the fields below are not required for IN devices (see + * UVC spec, 4.3.1.1), but we still copy them in case support for OUT + * devices is added in the future. */ + put_unaligned(cpu_to_le32(ctrl->dwMaxVideoFrameSize), + (__le32 *)&data[18]); + put_unaligned(cpu_to_le32(ctrl->dwMaxPayloadTransferSize), + (__le32 *)&data[22]); + + if (size == 34) { + put_unaligned(cpu_to_le32(ctrl->dwClockFrequency), + (__le32 *)&data[26]); + data[30] = ctrl->bmFramingInfo; + data[31] = ctrl->bPreferedVersion; + data[32] = ctrl->bMinVersion; + data[33] = ctrl->bMaxVersion; + } + + return __uvc_query_ctrl(video->dev, SET_CUR, 0, + video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); +} + +int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe) +{ + struct uvc_streaming_control probe_min, probe_max; + __u16 bandwidth; + unsigned int i; + int ret; + + mutex_lock(&video->streaming->mutex); + + /* Perform probing. The device should adjust the requested values + * according to its capabilities. However, some devices, namely the + * first generation UVC Logitech webcams, don't implement the Video + * Probe control properly, and just return the needed bandwidth. For + * that reason, if the needed bandwidth exceeds the maximum available + * bandwidth, try to lower the quality. + */ + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0) + goto done; + + /* Get the minimum and maximum values for compression settings. */ + if (!(video->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) { + ret = uvc_get_video_ctrl(video, &probe_min, 1, GET_MIN); + if (ret < 0) + goto done; + ret = uvc_get_video_ctrl(video, &probe_max, 1, GET_MAX); + if (ret < 0) + goto done; + + probe->wCompQuality = probe_max.wCompQuality; + } + + for (i = 0; i < 2; ++i) { + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0 || + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + goto done; + + if (video->streaming->intf->num_altsetting == 1) + break; + + bandwidth = probe->dwMaxPayloadTransferSize; + if (bandwidth <= video->streaming->maxpsize) + break; + + if (video->dev->quirks & UVC_QUIRK_PROBE_MINMAX) { + ret = -ENOSPC; + goto done; + } + + /* TODO: negotiate compression parameters */ + probe->wKeyFrameRate = probe_min.wKeyFrameRate; + probe->wPFrameRate = probe_min.wPFrameRate; + probe->wCompQuality = probe_max.wCompQuality; + probe->wCompWindowSize = probe_min.wCompWindowSize; + } + +done: + mutex_unlock(&video->streaming->mutex); + return ret; +} + +/* ------------------------------------------------------------------------ + * Video codecs + */ + +/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */ +#define UVC_STREAM_EOH (1 << 7) +#define UVC_STREAM_ERR (1 << 6) +#define UVC_STREAM_STI (1 << 5) +#define UVC_STREAM_RES (1 << 4) +#define UVC_STREAM_SCR (1 << 3) +#define UVC_STREAM_PTS (1 << 2) +#define UVC_STREAM_EOF (1 << 1) +#define UVC_STREAM_FID (1 << 0) + +/* Video payload decoding is handled by uvc_video_decode_start(), + * uvc_video_decode_data() and uvc_video_decode_end(). + * + * uvc_video_decode_start is called with URB data at the start of a bulk or + * isochronous payload. It processes header data and returns the header size + * in bytes if successful. If an error occurs, it returns a negative error + * code. The following error codes have special meanings. + * + * - EAGAIN informs the caller that the current video buffer should be marked + * as done, and that the function should be called again with the same data + * and a new video buffer. This is used when end of frame conditions can be + * reliably detected at the beginning of the next frame only. + * + * If an error other than -EAGAIN is returned, the caller will drop the current + * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be + * made until the next payload. -ENODATA can be used to drop the current + * payload if no other error code is appropriate. + * + * uvc_video_decode_data is called for every URB with URB data. It copies the + * data to the video buffer. + * + * uvc_video_decode_end is called with header data at the end of a bulk or + * isochronous payload. It performs any additional header data processing and + * returns 0 or a negative error code if an error occured. As header data have + * already been processed by uvc_video_decode_start, this functions isn't + * required to perform sanity checks a second time. + * + * For isochronous transfers where a payload is always transfered in a single + * URB, the three functions will be called in a row. + * + * To let the decoder process header data and update its internal state even + * when no video buffer is available, uvc_video_decode_start must be prepared + * to be called with a NULL buf parameter. uvc_video_decode_data and + * uvc_video_decode_end will never be called with a NULL buffer. + */ +static int uvc_video_decode_start(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + __u8 fid; + + /* Sanity checks: + * - packet must be at least 2 bytes long + * - bHeaderLength value must be at least 2 bytes (see above) + * - bHeaderLength value can't be larger than the packet size. + */ + if (len < 2 || data[0] < 2 || data[0] > len) + return -EINVAL; + + /* Skip payloads marked with the error bit ("error frames"). */ + if (data[1] & UVC_STREAM_ERR) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (error bit " + "set).\n"); + return -ENODATA; + } + + fid = data[1] & UVC_STREAM_FID; + + /* Store the payload FID bit and return immediately when the buffer is + * NULL. + */ + if (buf == NULL) { + video->last_fid = fid; + return -ENODATA; + } + + /* Synchronize to the input stream by waiting for the FID bit to be + * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. + * queue->last_fid is initialized to -1, so the first isochronous + * frame will always be in sync. + * + * If the device doesn't toggle the FID bit, invert video->last_fid + * when the EOF bit is set to force synchronisation on the next packet. + */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (fid == video->last_fid) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of " + "sync).\n"); + if ((video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) && + (data[1] & UVC_STREAM_EOF)) + video->last_fid ^= UVC_STREAM_FID; + return -ENODATA; + } + + /* TODO: Handle PTS and SCR. */ + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * End of frame detection is better implemented by checking the EOF + * bit (FID bit toggling is delayed by one frame compared to the EOF + * bit), but some devices don't set the bit at end of frame (and the + * last payload can be lost anyway). We thus must check if the FID has + * been toggled. + * + * queue->last_fid is initialized to -1, so the first isochronous + * frame will never trigger an end of frame detection. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. This also + * avoids detecting and of frame conditions at FID toggling if the + * previous payload had the EOF bit set. + */ + if (fid != video->last_fid && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " + "toggled).\n"); + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + video->last_fid = fid; + + return data[0]; +} + +static void uvc_video_decode_data(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + struct uvc_video_queue *queue = &video->queue; + unsigned int maxlen, nbytes; + void *mem; + + if (len <= 0) + return; + + /* Copy the video data to the buffer. */ + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min((unsigned int)len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + /* Complete the current frame if the buffer size was exceeded. */ + if (len > maxlen) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } +} + +static void uvc_video_decode_end(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + /* Mark the buffer as done if the EOF marker is set. */ + if (data[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); + if (data[0] == len) + uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); + buf->state = UVC_BUF_STATE_DONE; + if (video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) + video->last_fid ^= UVC_STREAM_FID; + } +} + +/* ------------------------------------------------------------------------ + * URB handling + */ + +/* + * Completion handler for video URBs. + */ +static void uvc_video_decode_isoc(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", urb->iso_frame_desc[i].status); + continue; + } + + /* Decode the payload header. */ + mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + do { + ret = uvc_video_decode_start(video, buf, mem, + urb->iso_frame_desc[i].actual_length); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + if (ret < 0) + continue; + + /* Decode the payload data. */ + uvc_video_decode_data(video, buf, mem + ret, + urb->iso_frame_desc[i].actual_length - ret); + + /* Process the header again. */ + uvc_video_decode_end(video, buf, mem, ret); + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } +} + +static void uvc_video_decode_bulk(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int len, ret; + + mem = urb->transfer_buffer; + len = urb->actual_length; + video->bulk.payload_size += len; + + /* If the URB is the first of its payload, decode and save the + * header. + */ + if (video->bulk.header_size == 0) { + do { + ret = uvc_video_decode_start(video, buf, mem, len); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + /* If an error occured skip the rest of the payload. */ + if (ret < 0 || buf == NULL) { + video->bulk.skip_payload = 1; + return; + } + + video->bulk.header_size = ret; + memcpy(video->bulk.header, mem, video->bulk.header_size); + + mem += ret; + len -= ret; + } + + /* The buffer queue might have been cancelled while a bulk transfer + * was in progress, so we can reach here with buf equal to NULL. Make + * sure buf is never dereferenced if NULL. + */ + + /* Process video data. */ + if (!video->bulk.skip_payload && buf != NULL) + uvc_video_decode_data(video, buf, mem, len); + + /* Detect the payload end by a URB smaller than the maximum size (or + * a payload size equal to the maximum) and process the header again. + */ + if (urb->actual_length < urb->transfer_buffer_length || + video->bulk.payload_size >= video->bulk.max_payload_size) { + if (!video->bulk.skip_payload && buf != NULL) { + uvc_video_decode_end(video, buf, video->bulk.header, + video->bulk.header_size); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } + + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + } +} + +static void uvc_video_complete(struct urb *urb) +{ + struct uvc_video_device *video = urb->context; + struct uvc_video_queue *queue = &video->queue; + struct uvc_buffer *buf = NULL; + unsigned long flags; + int ret; + + switch (urb->status) { + case 0: + break; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in video " + "completion handler.\n", urb->status); + + case -ENOENT: /* usb_kill_urb() called. */ + if (video->frozen) + return; + + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + uvc_queue_cancel(queue, urb->status == -ESHUTDOWN); + return; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (!list_empty(&queue->irqqueue)) + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + spin_unlock_irqrestore(&queue->irqlock, flags); + + video->decode(urb, video, buf); + + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n", + ret); + } +} + +/* + * Uninitialize isochronous/bulk URBs and free transfer buffers. + */ +static void uvc_uninit_video(struct uvc_video_device *video) +{ + struct urb *urb; + unsigned int i; + + for (i = 0; i < UVC_URBS; ++i) { + if ((urb = video->urb[i]) == NULL) + continue; + + usb_kill_urb(urb); + /* urb->transfer_buffer_length is not touched by USB core, so + * we can use it here as the buffer length. + */ + if (video->urb_buffer[i]) { + usb_buffer_free(video->dev->udev, + urb->transfer_buffer_length, + video->urb_buffer[i], urb->transfer_dma); + video->urb_buffer[i] = NULL; + } + + usb_free_urb(urb); + video->urb[i] = NULL; + } +} + +/* + * Initialize isochronous URBs and allocate transfer buffers. The packet size + * is given by the endpoint. + */ +static int uvc_init_video_isoc(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int npackets, i, j; + __u16 psize; + __u32 size; + + /* Compute the number of isochronous packets to allocate by dividing + * the maximum video frame size by the packet size. Limit the result + * to UVC_MAX_ISO_PACKETS. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + + size = video->streaming->ctrl.dwMaxVideoFrameSize; + if (size > UVC_MAX_FRAME_SIZE) + return -EINVAL; + + npackets = (size + psize - 1) / psize; + if (npackets > UVC_MAX_ISO_PACKETS) + npackets = UVC_MAX_ISO_PACKETS; + + size = npackets * psize; + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(npackets, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + urb->dev = video->dev->udev; + urb->context = video; + urb->pipe = usb_rcvisocpipe(video->dev->udev, + ep->desc.bEndpointAddress); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = ep->desc.bInterval; + urb->transfer_buffer = video->urb_buffer[i]; + urb->complete = uvc_video_complete; + urb->number_of_packets = npackets; + urb->transfer_buffer_length = size; + + for (j = 0; j < npackets; ++j) { + urb->iso_frame_desc[j].offset = j * psize; + urb->iso_frame_desc[j].length = psize; + } + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize bulk URBs and allocate transfer buffers. The packet size is + * given by the endpoint. + */ +static int uvc_init_video_bulk(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int pipe, i; + __u16 psize; + __u32 size; + + /* Compute the bulk URB size. Some devices set the maximum payload + * size to a value too high for memory-constrained devices. We must + * then transfer the payload accross multiple URBs. To be consistant + * with isochronous mode, allocate maximum UVC_MAX_ISO_PACKETS per bulk + * URB. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff; + size = video->streaming->ctrl.dwMaxPayloadTransferSize; + video->bulk.max_payload_size = size; + if (size > psize * UVC_MAX_ISO_PACKETS) + size = psize * UVC_MAX_ISO_PACKETS; + + pipe = usb_rcvbulkpipe(video->dev->udev, ep->desc.bEndpointAddress); + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + usb_fill_bulk_urb(urb, video->dev->udev, pipe, + video->urb_buffer[i], size, uvc_video_complete, + video); + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize isochronous/bulk URBs and allocate transfer buffers. + */ +static int uvc_init_video(struct uvc_video_device *video) +{ + struct usb_interface *intf = video->streaming->intf; + struct usb_host_interface *alts; + struct usb_host_endpoint *ep = NULL; + int intfnum = video->streaming->intfnum; + unsigned int bandwidth, psize, i; + int ret; + + video->last_fid = -1; + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + + if (intf->num_altsetting > 1) { + /* Isochronous endpoint, select the alternate setting. */ + bandwidth = video->streaming->ctrl.dwMaxPayloadTransferSize; + + if (bandwidth == 0) { + uvc_printk(KERN_WARNING, "device %s requested null " + "bandwidth, defaulting to lowest.\n", + video->vdev->name); + bandwidth = 1; + } + + for (i = 0; i < intf->num_altsetting; ++i) { + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + video->streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + /* Check if the bandwidth is high enough. */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize >= bandwidth) + break; + } + + if (i >= intf->num_altsetting) + return -EIO; + + if ((ret = usb_set_interface(video->dev->udev, intfnum, i)) < 0) + return ret; + + ret = uvc_init_video_isoc(video, ep); + } else { + /* Bulk endpoint, proceed to URB initialization. */ + ep = uvc_find_endpoint(&intf->altsetting[0], + video->streaming->header.bEndpointAddress); + if (ep == NULL) + return -EIO; + + ret = uvc_init_video_bulk(video, ep); + } + + if (ret < 0) + return ret; + + /* Submit the URBs. */ + for (i = 0; i < UVC_URBS; ++i) { + if ((ret = usb_submit_urb(video->urb[i], GFP_KERNEL)) < 0) { + uvc_printk(KERN_ERR, "Failed to submit URB %u " + "(%d).\n", i, ret); + uvc_uninit_video(video); + return ret; + } + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Stop streaming without disabling the video queue. + * + * To let userspace applications resume without trouble, we must not touch the + * video buffers in any way. We mark the device as frozen to make sure the URB + * completion handler won't try to cancel the queue when we kill the URBs. + */ +int uvc_video_suspend(struct uvc_video_device *video) +{ + if (!uvc_queue_streaming(&video->queue)) + return 0; + + video->frozen = 1; + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + return 0; +} + +/* + * Reconfigure the video interface and restart streaming if it was enable + * before suspend. + * + * If an error occurs, disable the video queue. This will wake all pending + * buffers, making sure userspace applications are notified of the problem + * instead of waiting forever. + */ +int uvc_video_resume(struct uvc_video_device *video) +{ + int ret; + + video->frozen = 0; + + if ((ret = uvc_set_video_ctrl(video, &video->streaming->ctrl, 0)) < 0) { + uvc_queue_enable(&video->queue, 0); + return ret; + } + + if (!uvc_queue_streaming(&video->queue)) + return 0; + + if ((ret = uvc_init_video(video)) < 0) + uvc_queue_enable(&video->queue, 0); + + return ret; +} + +/* ------------------------------------------------------------------------ + * Video device + */ + +/* + * Initialize the UVC video device by retrieving the default format and + * committing it. + * + * Some cameras (namely the Fuji Finepix) set the format and frame + * indexes to zero. The UVC standard doesn't clearly make this a spec + * violation, so try to silently fix the values if possible. + * + * This function is called before registering the device with V4L. + */ +int uvc_video_init(struct uvc_video_device *video) +{ + struct uvc_streaming_control *probe = &video->streaming->ctrl; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + unsigned int i; + int ret; + + if (video->streaming->nformats == 0) { + uvc_printk(KERN_INFO, "No supported video formats found.\n"); + return -EINVAL; + } + + /* Alternate setting 0 should be the default, yet the XBox Live Vision + * Cam (and possibly other devices) crash or otherwise misbehave if + * they don't receive a SET_INTERFACE request before any other video + * control request. + */ + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + + /* Some webcams don't suport GET_DEF request on the probe control. We + * fall back to GET_CUR if GET_DEF fails. + */ + if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + return ret; + + /* Check if the default format descriptor exists. Use the first + * available format otherwise. + */ + for (i = video->streaming->nformats; i > 0; --i) { + format = &video->streaming->format[i-1]; + if (format->index == probe->bFormatIndex) + break; + } + + if (format->nframes == 0) { + uvc_printk(KERN_INFO, "No frame descriptor found for the " + "default format.\n"); + return -EINVAL; + } + + /* Zero bFrameIndex might be correct. Stream-based formats (including + * MPEG-2 TS and DV) do not support frames but have a dummy frame + * descriptor with bFrameIndex set to zero. If the default frame + * descriptor is not found, use the first avalable frame. + */ + for (i = format->nframes; i > 0; --i) { + frame = &format->frame[i-1]; + if (frame->bFrameIndex == probe->bFrameIndex) + break; + } + + /* Commit the default settings. */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + if ((ret = uvc_set_video_ctrl(video, probe, 0)) < 0) + return ret; + + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + atomic_set(&video->active, 0); + + /* Select the video decoding function */ + if (video->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT) + video->decode = uvc_video_decode_isight; + else if (video->streaming->intf->num_altsetting > 1) + video->decode = uvc_video_decode_isoc; + else + video->decode = uvc_video_decode_bulk; + + return 0; +} + +/* + * Enable or disable the video stream. + */ +int uvc_video_enable(struct uvc_video_device *video, int enable) +{ + int ret; + + if (!enable) { + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, + video->streaming->intfnum, 0); + uvc_queue_enable(&video->queue, 0); + return 0; + } + + if ((ret = uvc_queue_enable(&video->queue, 1)) < 0) + return ret; + + return uvc_init_video(video); +} diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h new file mode 100644 index 0000000..a995a78 --- /dev/null +++ b/drivers/media/video/uvc/uvcvideo.h @@ -0,0 +1,796 @@ +#ifndef _USB_VIDEO_H_ +#define _USB_VIDEO_H_ + +#include +#include + + +/* + * Dynamic controls + */ + +/* Data types for UVC control data */ +#define UVC_CTRL_DATA_TYPE_RAW 0 +#define UVC_CTRL_DATA_TYPE_SIGNED 1 +#define UVC_CTRL_DATA_TYPE_UNSIGNED 2 +#define UVC_CTRL_DATA_TYPE_BOOLEAN 3 +#define UVC_CTRL_DATA_TYPE_ENUM 4 +#define UVC_CTRL_DATA_TYPE_BITMASK 5 + +/* Control flags */ +#define UVC_CONTROL_SET_CUR (1 << 0) +#define UVC_CONTROL_GET_CUR (1 << 1) +#define UVC_CONTROL_GET_MIN (1 << 2) +#define UVC_CONTROL_GET_MAX (1 << 3) +#define UVC_CONTROL_GET_RES (1 << 4) +#define UVC_CONTROL_GET_DEF (1 << 5) +/* Control should be saved at suspend and restored at resume. */ +#define UVC_CONTROL_RESTORE (1 << 6) +/* Control can be updated by the camera. */ +#define UVC_CONTROL_AUTO_UPDATE (1 << 7) + +#define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \ + UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \ + UVC_CONTROL_GET_DEF) + +struct uvc_xu_control_info { + __u8 entity[16]; + __u8 index; + __u8 selector; + __u16 size; + __u32 flags; +}; + +struct uvc_xu_control_mapping { + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; +}; + +struct uvc_xu_control { + __u8 unit; + __u8 selector; + __u16 size; + __u8 __user *data; +}; + +#define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info) +#define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping) +#define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control) +#define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control) + +#ifdef __KERNEL__ + +#include + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 + +#define PC_PROTOCOL_UNDEFINED 0x00 + +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 + +/* VideoControl class specific interface descriptor */ +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 + +/* VideoStreaming class specific interface descriptor */ +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 + +/* Endpoint type */ +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 + +/* Request codes */ +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 + +/* VideoControl interface controls */ +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* Terminal controls */ +#define TE_CONTROL_UNDEFINED 0x00 + +/* Selector Unit controls */ +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 + +/* Camera Terminal controls */ +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 + +/* Processing Unit controls */ +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +#define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 +#define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 +#define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 + +/* VideoStreaming interface controls */ +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 + +/* Input Terminal types */ +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* Output Terminal types */ +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* External Terminal types */ +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 + +#define UVC_TERM_INPUT 0x0000 +#define UVC_TERM_OUTPUT 0x8000 + +#define UVC_ENTITY_TYPE(entity) ((entity)->type & 0x7fff) +#define UVC_ENTITY_IS_UNIT(entity) (((entity)->type & 0xff00) == 0) +#define UVC_ENTITY_IS_TERM(entity) (((entity)->type & 0xff00) != 0) +#define UVC_ENTITY_IS_ITERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_INPUT) +#define UVC_ENTITY_IS_OTERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_OUTPUT) + +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +/* ------------------------------------------------------------------------ + * GUIDs + */ +#define UVC_GUID_UVC_CAMERA \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} +#define UVC_GUID_UVC_OUTPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02} +#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03} +#define UVC_GUID_UVC_PROCESSING \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01} +#define UVC_GUID_UVC_SELECTOR \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02} + +#define UVC_GUID_LOGITECH_DEV_INFO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1e} +#define UVC_GUID_LOGITECH_USER_HW \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1f} +#define UVC_GUID_LOGITECH_VIDEO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x50} +#define UVC_GUID_LOGITECH_MOTOR \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x56} + +#define UVC_GUID_FORMAT_MJPEG \ + { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YUY2 \ + { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_NV12 \ + { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YV12 \ + { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_I420 \ + { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_UYVY \ + { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y800 \ + { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BY8 \ + { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + + +/* ------------------------------------------------------------------------ + * Driver specific constants. + */ + +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 1, 0) + +/* Number of isochronous URBs. */ +#define UVC_URBS 5 +/* Maximum number of packets per isochronous URB. */ +#define UVC_MAX_ISO_PACKETS 40 +/* Maximum frame size in bytes, for sanity checking. */ +#define UVC_MAX_FRAME_SIZE (16*1024*1024) +/* Maximum number of video buffers. */ +#define UVC_MAX_VIDEO_BUFFERS 32 + +#define UVC_CTRL_CONTROL_TIMEOUT 300 +#define UVC_CTRL_STREAMING_TIMEOUT 1000 + +/* Devices quirks */ +#define UVC_QUIRK_STATUS_INTERVAL 0x00000001 +#define UVC_QUIRK_PROBE_MINMAX 0x00000002 +#define UVC_QUIRK_PROBE_EXTRAFIELDS 0x00000004 +#define UVC_QUIRK_BUILTIN_ISIGHT 0x00000008 +#define UVC_QUIRK_STREAM_NO_FID 0x00000010 +#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020 + +/* Format flags */ +#define UVC_FMT_FLAG_COMPRESSED 0x00000001 +#define UVC_FMT_FLAG_STREAM 0x00000002 + +/* ------------------------------------------------------------------------ + * Structures. + */ + +struct uvc_device; + +/* TODO: Put the most frequently accessed fields at the beginning of + * structures to maximize cache efficiency. + */ +struct uvc_streaming_control { + __u16 bmHint; + __u8 bFormatIndex; + __u8 bFrameIndex; + __u32 dwFrameInterval; + __u16 wKeyFrameRate; + __u16 wPFrameRate; + __u16 wCompQuality; + __u16 wCompWindowSize; + __u16 wDelay; + __u32 dwMaxVideoFrameSize; + __u32 dwMaxPayloadTransferSize; + __u32 dwClockFrequency; + __u8 bmFramingInfo; + __u8 bPreferedVersion; + __u8 bMinVersion; + __u8 bMaxVersion; +}; + +struct uvc_menu_info { + __u32 value; + __u8 name[32]; +}; + +struct uvc_control_info { + struct list_head list; + struct list_head mappings; + + __u8 entity[16]; + __u8 index; + __u8 selector; + + __u16 size; + __u32 flags; +}; + +struct uvc_control_mapping { + struct list_head list; + + struct uvc_control_info *ctrl; + + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; + + struct uvc_menu_info *menu_info; + __u32 menu_count; +}; + +struct uvc_control { + struct uvc_entity *entity; + struct uvc_control_info *info; + + __u8 index; /* Used to match the uvc_control entry with a + uvc_control_info. */ + __u8 dirty : 1, + loaded : 1, + modified : 1; + + __u8 *data; +}; + +struct uvc_format_desc { + char *name; + __u8 guid[16]; + __u32 fcc; +}; + +/* The term 'entity' refers to both UVC units and UVC terminals. + * + * The type field is either the terminal type (wTerminalType in the terminal + * descriptor), or the unit type (bDescriptorSubtype in the unit descriptor). + * As the bDescriptorSubtype field is one byte long, the type value will + * always have a null MSB for units. All terminal types defined by the UVC + * specification have a non-null MSB, so it is safe to use the MSB to + * differentiate between units and terminals as long as the descriptor parsing + * code makes sure terminal types have a non-null MSB. + * + * For terminals, the type's most significant bit stores the terminal + * direction (either UVC_TERM_INPUT or UVC_TERM_OUTPUT). The type field should + * always be accessed with the UVC_ENTITY_* macros and never directly. + */ + +struct uvc_entity { + struct list_head list; /* Entity as part of a UVC device. */ + struct list_head chain; /* Entity as part of a video device + * chain. */ + __u8 id; + __u16 type; + char name[64]; + + union { + struct { + __u16 wObjectiveFocalLengthMin; + __u16 wObjectiveFocalLengthMax; + __u16 wOcularFocalLength; + __u8 bControlSize; + __u8 *bmControls; + } camera; + + struct { + __u8 bControlSize; + __u8 *bmControls; + __u8 bTransportModeSize; + __u8 *bmTransportModes; + } media; + + struct { + __u8 bSourceID; + } output; + + struct { + __u8 bSourceID; + __u16 wMaxMultiplier; + __u8 bControlSize; + __u8 *bmControls; + __u8 bmVideoStandards; + } processing; + + struct { + __u8 bNrInPins; + __u8 *baSourceID; + } selector; + + struct { + __u8 guidExtensionCode[16]; + __u8 bNumControls; + __u8 bNrInPins; + __u8 *baSourceID; + __u8 bControlSize; + __u8 *bmControls; + __u8 *bmControlsType; + } extension; + }; + + unsigned int ncontrols; + struct uvc_control *controls; +}; + +struct uvc_frame { + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u8 bFrameIntervalType; + __u32 dwDefaultFrameInterval; + __u32 *dwFrameInterval; +}; + +struct uvc_format { + __u8 type; + __u8 index; + __u8 bpp; + __u8 colorspace; + __u32 fcc; + __u32 flags; + + char name[32]; + + unsigned int nframes; + struct uvc_frame *frame; +}; + +struct uvc_streaming_header { + __u8 bNumFormats; + __u8 bEndpointAddress; + __u8 bTerminalLink; + __u8 bControlSize; + __u8 *bmaControls; + /* The following fields are used by input headers only. */ + __u8 bmInfo; + __u8 bStillCaptureMethod; + __u8 bTriggerSupport; + __u8 bTriggerUsage; +}; + +struct uvc_streaming { + struct list_head list; + + struct usb_interface *intf; + int intfnum; + __u16 maxpsize; + + struct uvc_streaming_header header; + + unsigned int nformats; + struct uvc_format *format; + + struct uvc_streaming_control ctrl; + struct uvc_format *cur_format; + struct uvc_frame *cur_frame; + + struct mutex mutex; +}; + +enum uvc_buffer_state { + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, +}; + +struct uvc_buffer { + unsigned long vma_use_count; + struct list_head stream; + + /* Touched by interrupt handler. */ + struct v4l2_buffer buf; + struct list_head queue; + wait_queue_head_t wait; + enum uvc_buffer_state state; +}; + +#define UVC_QUEUE_STREAMING (1 << 0) +#define UVC_QUEUE_DISCONNECTED (1 << 1) +#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2) + +struct uvc_video_queue { + void *mem; + unsigned int flags; + __u32 sequence; + + unsigned int count; + unsigned int buf_size; + struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS]; + struct mutex mutex; /* protects buffers and mainqueue */ + spinlock_t irqlock; /* protects irqqueue */ + + struct list_head mainqueue; + struct list_head irqqueue; +}; + +struct uvc_video_device { + struct uvc_device *dev; + struct video_device *vdev; + atomic_t active; + unsigned int frozen : 1; + + struct list_head iterms; + struct uvc_entity *oterm; + struct uvc_entity *processing; + struct uvc_entity *selector; + struct list_head extensions; + struct mutex ctrl_mutex; + + struct uvc_video_queue queue; + + /* Video streaming object, must always be non-NULL. */ + struct uvc_streaming *streaming; + + void (*decode) (struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + + /* Context data used by the bulk completion handler. */ + struct { + __u8 header[256]; + unsigned int header_size; + int skip_payload; + __u32 payload_size; + __u32 max_payload_size; + } bulk; + + struct urb *urb[UVC_URBS]; + char *urb_buffer[UVC_URBS]; + + __u8 last_fid; +}; + +enum uvc_device_state { + UVC_DEV_DISCONNECTED = 1, +}; + +struct uvc_device { + struct usb_device *udev; + struct usb_interface *intf; + __u32 quirks; + int intfnum; + char name[32]; + + enum uvc_device_state state; + struct kref kref; + struct list_head list; + + /* Video control interface */ + __u16 uvc_version; + __u32 clock_frequency; + + struct list_head entities; + + struct uvc_video_device video; + + /* Status Interrupt Endpoint */ + struct usb_host_endpoint *int_ep; + struct urb *int_urb; + __u8 status[16]; + struct input_dev *input; + + /* Video Streaming interfaces */ + struct list_head streaming; +}; + +enum uvc_handle_state { + UVC_HANDLE_PASSIVE = 0, + UVC_HANDLE_ACTIVE = 1, +}; + +struct uvc_fh { + struct uvc_video_device *device; + enum uvc_handle_state state; +}; + +struct uvc_driver { + struct usb_driver driver; + + struct mutex open_mutex; /* protects from open/disconnect race */ + + struct list_head devices; /* struct uvc_device list */ + struct list_head controls; /* struct uvc_control_info list */ + struct mutex ctrl_mutex; /* protects controls and devices + lists */ +}; + +/* ------------------------------------------------------------------------ + * Debugging, printing and logging + */ + +#define UVC_TRACE_PROBE (1 << 0) +#define UVC_TRACE_DESCR (1 << 1) +#define UVC_TRACE_CONTROL (1 << 2) +#define UVC_TRACE_FORMAT (1 << 3) +#define UVC_TRACE_CAPTURE (1 << 4) +#define UVC_TRACE_CALLS (1 << 5) +#define UVC_TRACE_IOCTL (1 << 6) +#define UVC_TRACE_FRAME (1 << 7) +#define UVC_TRACE_SUSPEND (1 << 8) +#define UVC_TRACE_STATUS (1 << 9) + +extern unsigned int uvc_trace_param; + +#define uvc_trace(flag, msg...) \ + do { \ + if (uvc_trace_param & flag) \ + printk(KERN_DEBUG "uvcvideo: " msg); \ + } while (0) + +#define uvc_printk(level, msg...) \ + printk(level "uvcvideo: " msg) + +#define UVC_GUID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \ + "%02x%02x%02x%02x%02x%02x" +#define UVC_GUID_ARGS(guid) \ + (guid)[3], (guid)[2], (guid)[1], (guid)[0], \ + (guid)[5], (guid)[4], \ + (guid)[7], (guid)[6], \ + (guid)[8], (guid)[9], \ + (guid)[10], (guid)[11], (guid)[12], \ + (guid)[13], (guid)[14], (guid)[15] + +/* -------------------------------------------------------------------------- + * Internal functions. + */ + +/* Core driver */ +extern struct uvc_driver uvc_driver; +extern void uvc_delete(struct kref *kref); + +/* Video buffers queue management. */ +extern void uvc_queue_init(struct uvc_video_queue *queue); +extern int uvc_alloc_buffers(struct uvc_video_queue *queue, + unsigned int nbuffers, unsigned int buflength); +extern int uvc_free_buffers(struct uvc_video_queue *queue); +extern int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking); +extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable); +extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect); +extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf); +extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue, + struct file *file, poll_table *wait); +static inline int uvc_queue_streaming(struct uvc_video_queue *queue) +{ + return queue->flags & UVC_QUEUE_STREAMING; +} + +/* V4L2 interface */ +extern struct file_operations uvc_fops; + +/* Video */ +extern int uvc_video_init(struct uvc_video_device *video); +extern int uvc_video_suspend(struct uvc_video_device *video); +extern int uvc_video_resume(struct uvc_video_device *video); +extern int uvc_video_enable(struct uvc_video_device *video, int enable); +extern int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe); +extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size); +extern int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe); + +/* Status */ +extern int uvc_status_init(struct uvc_device *dev); +extern void uvc_status_cleanup(struct uvc_device *dev); +extern int uvc_status_suspend(struct uvc_device *dev); +extern int uvc_status_resume(struct uvc_device *dev); + +/* Controls */ +extern struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping); +extern int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl); + +extern int uvc_ctrl_add_info(struct uvc_control_info *info); +extern int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping); +extern int uvc_ctrl_init_device(struct uvc_device *dev); +extern void uvc_ctrl_cleanup_device(struct uvc_device *dev); +extern int uvc_ctrl_resume_device(struct uvc_device *dev); +extern void uvc_ctrl_init(void); + +extern int uvc_ctrl_begin(struct uvc_video_device *video); +extern int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback); +static inline int uvc_ctrl_commit(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 0); +} +static inline int uvc_ctrl_rollback(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 1); +} + +extern int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); +extern int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); + +extern int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *ctrl, int set); + +/* Utility functions */ +extern void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold); +extern uint32_t uvc_fraction_to_interval(uint32_t numerator, + uint32_t denominator); +extern struct usb_host_endpoint *uvc_find_endpoint( + struct usb_host_interface *alts, __u8 epaddr); + +/* Quirks support */ +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + +#endif /* __KERNEL__ */ + +#endif -- cgit v0.10.2 From dd4f0888f8b42a97c93a66617a4f9acaff3089d6 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 30 Jun 2008 15:03:14 -0700 Subject: [IA64] Bugfix for system with 32 cpus On a system where there are no hot pluggable cpus "additional_cpus" is still set to -1 at the point where we call per_cpu_scan_finalize(). If we didn't find an SRAT table and so pick the default "32" for the number of cpus, when we get to: high_cpu = min(high_cpu + reserve_cpus, NR_CPUS); we will end up initializing for just 31 cpus ... and so we will die horribly when bringing up cpu#32. Problem introduced by: 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." Acked-by: Robin Holt Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 4ae15c8..632cda8 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -547,7 +547,8 @@ setup_arch (char **cmdline_p) # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ? - 32 : cpus_weight(early_cpu_possible_map)), additional_cpus); + 32 : cpus_weight(early_cpu_possible_map)), + additional_cpus > 0 ? additional_cpus : 0); # endif #else # ifdef CONFIG_SMP -- cgit v0.10.2 From 3a677d216445dba3332a000063405de3fc135859 Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Mon, 30 Jun 2008 15:06:48 -0700 Subject: [IA64] export account_system_vtime The symbol account_system_vtime is used by the kvm module but not exported. This breaks building with CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_KVM=m. Signed-off-by: Doug Chapman Acked-by: Hidetosho Seto Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 8c73643..aad1b7b 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -117,6 +117,7 @@ void account_system_vtime(struct task_struct *tsk) local_irq_restore(flags); } +EXPORT_SYMBOL_GPL(account_system_vtime); /* * Called from the timer interrupt handler to charge accumulated user time -- cgit v0.10.2 From 619b0488038224391e64fa03854651ca0f5efe56 Mon Sep 17 00:00:00 2001 From: Raistlin Date: Thu, 26 Jun 2008 18:54:09 +0200 Subject: sched: fix divide error when trying to configure rt_period to zero Here it is another little Oops we found while configuring invalid values via cgroups: echo 0 > /dev/cgroups/0/cpu.rt_period_us or echo 4294967296 > /dev/cgroups/0/cpu.rt_period_us [ 205.509825] divide error: 0000 [#1] [ 205.510151] Modules linked in: [ 205.510151] [ 205.510151] Pid: 2339, comm: bash Not tainted (2.6.26-rc8 #33) [ 205.510151] EIP: 0060:[] EFLAGS: 00000293 CPU: 0 [ 205.510151] EIP is at div64_u64+0x5f/0x70 [ 205.510151] EAX: 0000389f EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 205.510151] ESI: d9800000 EDI: 00000000 EBP: c6cede60 ESP: c6cede50 [ 205.510151] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 205.510151] Process bash (pid: 2339, ti=c6cec000 task=c79be370 task.ti=c6cec000) [ 205.510151] Stack: d9800000 0000389f c05971a0 d9800000 c6cedeb4 c0214dbd 00000000 00000000 [ 205.510151] c6cede88 c0242bd8 c05377c0 c7a41b40 00000000 00000000 00000000 c05971a0 [ 205.510151] c780ed20 c7508494 c7a41b40 00000000 00000002 c6cedebc c05971a0 ffffffea [ 205.510151] Call Trace: [ 205.510151] [] ? __rt_schedulable+0x1cd/0x240 [ 205.510151] [] ? cgroup_file_open+0x18/0xe0 [ 205.510151] [] ? tg_set_bandwidth+0xa4/0xf0 [ 205.510151] [] ? sched_group_set_rt_period+0x36/0x50 [ 205.510151] [] ? cpu_rt_period_write_uint+0xe/0x10 [ 205.510151] [] ? cgroup_file_write+0x125/0x160 [ 205.510151] [] ? hrtimer_interrupt+0x155/0x190 [ 205.510151] [] ? security_file_permission+0xf/0x20 [ 205.510151] [] ? rw_verify_area+0x48/0xc0 [ 205.510151] [] ? dupfd+0x104/0x130 [ 205.510151] [] ? vfs_write+0x9c/0x160 [ 205.510151] [] ? cgroup_file_write+0x0/0x160 [ 205.510151] [] ? sys_write+0x3d/0x70 [ 205.510151] [] ? sysenter_past_esp+0x6a/0x91 [ 205.510151] ======================= [ 205.510151] Code: 0f 45 de 31 f6 0f ad d0 d3 ea f6 c1 20 0f 45 c2 0f 45 d6 89 45 f0 89 55 f4 8b 55 f4 31 c9 8b 45 f0 39 d3 89 c6 77 08 89 d0 31 d2 f3 89 c1 83 c4 08 89 f0 f7 f3 89 ca 5b 5e 5d c3 55 89 e5 56 [ 205.510151] EIP: [] div64_u64+0x5f/0x70 SS:ESP 0068:c6cede50 The attached patch solves the issue for me. I'm checking as soon as possible for the period not being zero since, if it is, going ahead is useless. This way we also save a mutex_lock() and a read_lock() wrt doing it inside tg_set_bandwidth() or __rt_schedulable(). Signed-off-by: Dario Faggioli Signed-off-by: Michael Trimarchi Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index a66e856..94ead43 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8502,6 +8502,9 @@ int sched_group_set_rt_period(struct task_group *tg, long rt_period_us) rt_period = (u64)rt_period_us * NSEC_PER_USEC; rt_runtime = tg->rt_bandwidth.rt_runtime; + if (rt_period == 0) + return -EINVAL; + return tg_set_bandwidth(tg, rt_period, rt_runtime); } -- cgit v0.10.2 From efac41894df57d32b483ac622d03541b5b2692c0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 1 Jul 2008 08:56:32 +0200 Subject: x86: fix NODES_SHIFT Kconfig range commit 4323838215184f5a2f081e0d17b8d60731b03164 x86: change size of node ids from u8 to s16 set the range for NODES_SHIFT to 1..15. The possible range is 1..9 Fixes Bugzilla #10726 Reported-by: Dave Jones Signed-off-by: Thomas Gleixner diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 52e18e6..8a07f41 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -961,8 +961,8 @@ config NUMA_EMU number of nodes. This is only useful for debugging. config NODES_SHIFT - int "Max num nodes shift(1-15)" - range 1 15 if X86_64 + int "Max num nodes shift(1-9)" + range 1 9 if X86_64 default "6" if X86_64 default "4" if X86_NUMAQ default "3" -- cgit v0.10.2 From d585d0b9d73ed999cc7b8cf3cac4a5b01abb544e Mon Sep 17 00:00:00 2001 From: Divyesh Shah Date: Mon, 16 Jun 2008 18:37:08 +0200 Subject: block: Fix the starving writes bug in the anticipatory IO scheduler AS scheduler alternates between issuing read and write batches. It does the batch switch only after all requests from the previous batch are completed. When switching to a write batch, if there is an on-going read request, it waits for its completion and indicates its intention of switching by setting ad->changed_batch and the new direction but does not update the batch_expire_time for the new write batch which it does in the case of no previous pending requests. On completion of the read request, it sees that we were waiting for the switch and schedules work for kblockd right away and resets the ad->changed_data flag. Now when kblockd enters dispatch_request where it is expected to pick up a write request, it in turn ends the write batch because the batch_expire_timer was not updated and shows the expire timestamp for the previous batch. This results in the write starvation for all the cases where there is the intention for switching to a write batch, but there is a previous in-flight read request and the batch gets reverted to a read_batch right away. This also holds true in the reverse case (switching from a write batch to a read batch with an in-flight write request). I've checked that this bug exists on 2.6.11, 2.6.18, 2.6.24 and linux-2.6-block git HEAD. I've tested the fix on x86 platforms with SCSI drives where the driver asks for the next request while a current request is in-flight. This patch is based off linux-2.6-block git HEAD. Bug reproduction: A simple scenario which reproduces this bug is: - dd if=/dev/hda3 of=/dev/null & - lilo The lilo takes forever to complete. This can also be reproduced fairly easily with the earlier dd and another test program doing msync(). The example test program below should print out a message after every iteration but it simply hangs forever. With this bugfix it makes forward progress. ==== Example test program using msync() (thanks to suleiman AT google DOT com) inline uint64_t rdtsc(void) { int64_t tsc; __asm __volatile("rdtsc" : "=A" (tsc)); return (tsc); } int main(int argc, char **argv) { struct stat st; uint64_t e, s, t; char *p, q; long i; int fd; if (argc < 2) { printf("Usage: %s \n", argv[0]); return (1); } if ((fd = open(argv[1], O_RDWR | O_NOATIME)) < 0) err(1, "open"); if (fstat(fd, &st) < 0) err(1, "fstat"); p = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); t = 0; for (i = 0; i < 1000; i++) { *p = 0; msync(p, 4096, MS_SYNC); s = rdtsc(); *p = 0; __asm __volatile(""::: "memory"); e = rdtsc(); if (argc > 2) printf("%d: %lld cycles %jd %jd\n", i, e - s, (intmax_t)s, (intmax_t)e); t += e - s; } printf("average time: %lld cycles\n", t / 1000); return (0); } Cc: Acked-by: Nick Piggin Signed-off-by: Jens Axboe diff --git a/block/as-iosched.c b/block/as-iosched.c index 8c39467..743f33a 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -831,6 +831,8 @@ static void as_completed_request(struct request_queue *q, struct request *rq) } if (ad->changed_batch && ad->nr_dispatched == 1) { + ad->current_batch_expires = jiffies + + ad->batch_expire[ad->batch_data_dir]; kblockd_schedule_work(&ad->antic_work); ad->changed_batch = 0; -- cgit v0.10.2 From 18ce3751ccd488c78d3827e9f6bf54e6322676fb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 1 Jul 2008 09:07:34 +0200 Subject: Properly notify block layer of sync writes fsync_buffers_list() and sync_dirty_buffer() both issue async writes and then immediately wait on them. Conceptually, that makes them sync writes and we should treat them as such so that the IO schedulers can handle them appropriately. This patch fixes a write starvation issue that Lin Ming reported, where xx is stuck for more than 2 minutes because of a large number of synchronous IO in the system: INFO: task kjournald:20558 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D ffff810010820978 6712 20558 2 ffff81022ddb1d10 0000000000000046 ffff81022e7baa10 ffffffff803ba6f2 ffff81022ecd0000 ffff8101e6dc9160 ffff81022ecd0348 000000008048b6cb 0000000000000086 ffff81022c4e8d30 0000000000000000 ffffffff80247537 Call Trace: [] kobject_get+0x12/0x17 [] getnstimeofday+0x2f/0x83 [] sync_buffer+0x0/0x3f [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x40/0x6f [] sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6c/0x78 [] wake_bit_function+0x0/0x23 [] sync_dirty_buffer+0x98/0xcb [] journal_commit_transaction+0x97d/0xcb6 [] lock_timer_base+0x26/0x4b [] kjournald+0xc1/0x1fb [] autoremove_wake_function+0x0/0x2e [] kjournald+0x0/0x1fb [] kthread+0x47/0x74 [] schedule_tail+0x28/0x5d [] child_rip+0xa/0x12 [] kthread+0x0/0x74 [] child_rip+0x0/0x12 Lin Ming confirms that this patch fixes the issue. I've run tests with it for the past week and no ill effects have been observed, so I'm proposing it for inclusion into 2.6.26. Signed-off-by: Jens Axboe diff --git a/fs/buffer.c b/fs/buffer.c index a073f3f..0f51c0f 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -821,7 +821,7 @@ static int fsync_buffers_list(spinlock_t *lock, struct list_head *list) * contents - it is a noop if I/O is still in * flight on potentially older contents. */ - ll_rw_block(SWRITE, 1, &bh); + ll_rw_block(SWRITE_SYNC, 1, &bh); brelse(bh); spin_lock(lock); } @@ -2940,16 +2940,19 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) for (i = 0; i < nr; i++) { struct buffer_head *bh = bhs[i]; - if (rw == SWRITE) + if (rw == SWRITE || rw == SWRITE_SYNC) lock_buffer(bh); else if (test_set_buffer_locked(bh)) continue; - if (rw == WRITE || rw == SWRITE) { + if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) { if (test_clear_buffer_dirty(bh)) { bh->b_end_io = end_buffer_write_sync; get_bh(bh); - submit_bh(WRITE, bh); + if (rw == SWRITE_SYNC) + submit_bh(WRITE_SYNC, bh); + else + submit_bh(WRITE, bh); continue; } } else { @@ -2978,7 +2981,7 @@ int sync_dirty_buffer(struct buffer_head *bh) if (test_clear_buffer_dirty(bh)) { get_bh(bh); bh->b_end_io = end_buffer_write_sync; - ret = submit_bh(WRITE, bh); + ret = submit_bh(WRITE_SYNC, bh); wait_on_buffer(bh); if (buffer_eopnotsupp(bh)) { clear_buffer_eopnotsupp(bh); diff --git a/include/linux/fs.h b/include/linux/fs.h index 7c10808..d8e2762 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -83,6 +83,7 @@ extern int dir_notify_enable; #define READ_SYNC (READ | (1 << BIO_RW_SYNC)) #define READ_META (READ | (1 << BIO_RW_META)) #define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC)) +#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNC)) #define WRITE_BARRIER ((1 << BIO_RW) | (1 << BIO_RW_BARRIER)) #define SEL_IN 1 -- cgit v0.10.2 From 8558f8f81680a43d383abd1b5f23d3501fedfa65 Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Fri, 27 Jun 2008 10:17:38 +0530 Subject: rcu: fix hotplug vs rcu race Dhaval Giani reported this warning during cpu hotplug stress-tests: | On running kernel compiles in parallel with cpu hotplug: | | WARNING: at arch/x86/kernel/smp.c:118 | native_smp_send_reschedule+0x21/0x36() | Modules linked in: | Pid: 27483, comm: cc1 Not tainted 2.6.26-rc7 #1 | [...] | [] native_smp_send_reschedule+0x21/0x36 | [] force_quiescent_state+0x47/0x57 | [] call_rcu+0x51/0x6d | [] __fput+0x130/0x158 | [] fput+0x17/0x19 | [] filp_close+0x4d/0x57 | [] sys_close+0x5c/0x97 IMHO the warning is a spurious one. cpu_online_map is updated by the _cpu_down() using stop_machine_run(). Since force_quiescent_state is invoked from irqs disabled section, stop_machine_run() won't be executing while a cpu is executing force_quiescent_state(). Hence the cpu_online_map is stable while we're in the irq disabled section. However, a cpu might have been offlined _just_ before we disabled irqs while entering force_quiescent_state(). And rcu subsystem might not yet have handled the CPU_DEAD notification, leading to the offlined cpu's bit being set in the rcp->cpumask. Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent sending smp_reschedule() to an offlined CPU. Here's the timeline: CPU_A CPU_B -------------------------------------------------------------- cpu_down(): . . . . . stop_machine(): /* disables preemption, . * and irqs */ . . . . . take_cpu_down(); . . . . . . . cpu_disable(); /*this removes cpu . *from cpu_online_map . */ . . . . . restart_machine(); /* enables irqs */ . ------WINDOW DURING WHICH rcp->cpumask is stale --------------- . call_rcu(); . /* disables irqs here */ . .force_quiescent_state(); .CPU_DEAD: .for_each_cpu(rcp->cpumask) . . smp_send_reschedule(); . . . . WARN_ON() for offlined CPU! . . . rcu_cpu_notify: . -------- WINDOW ENDS ------------------------------------------ rcu_offline_cpu() /* Which calls cpu_quiet() * which removes * cpu from rcp->cpumask. */ If a new batch was started just before calling stop_machine_run(), the "tobe-offlined" cpu is still present in rcp-cpumask. During a cpu-offline, from take_cpu_down(), we queue an rt-prio idle task as the next task to be picked by the scheduler. We also call cpu_disable() which will disable any further interrupts and remove the cpu's bit from the cpu_online_map. Once the stop_machine_run() successfully calls take_cpu_down(), it calls schedule(). That's the last time a schedule is called on the offlined cpu, and hence the last time when rdp->passed_quiesc will be set to 1 through rcu_qsctr_inc(). But the cpu_quiet() will be on this cpu will be called only when the next RCU_SOFTIRQ occurs on this CPU. So at this time, the offlined CPU is still set in rcp->cpumask. Now coming back to the idle_task which truely offlines the CPU, it does check for a pending RCU and raises the softirq, since it will find rdp->passed_quiesc to be 0 in this case. However, since the cpu is offline I am not sure if the softirq will trigger on the CPU. Even if it doesn't the rcu_offline_cpu() will find that rcp->completed is not the same as rcp->cur, which means that our cpu could be holding up the grace period progression. Hence we call cpu_quiet() and move ahead. But because of the window explained in the timeline, we could still have a call_rcu() before the RCU subsystem executes it's CPU_DEAD notification, and we send smp_send_reschedule() to offlined cpu while trying to force the quiescent states. The appended patch adds comments and prevents checking for offlined cpu everytime. cpu_online_map is updated by the _cpu_down() using stop_machine_run(). Since force_quiescent_state is invoked from irqs disabled section, stop_machine_run() won't be executing while a cpu is executing force_quiescent_state(). Hence the cpu_online_map is stable while we're in the irq disabled section. Reported-by: Dhaval Giani Signed-off-by: Gautham R Shenoy Acked-by: Dhaval Giani Cc: Dipankar Sarma Cc: laijs@cn.fujitsu.com Cc: Peter Zijlstra Cc: Rusty Russel Cc: "Paul E. McKenney" Signed-off-by: Ingo Molnar diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index f4ffbd0..a38895a 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -89,8 +89,22 @@ static void force_quiescent_state(struct rcu_data *rdp, /* * Don't send IPI to itself. With irqs disabled, * rdp->cpu is the current cpu. + * + * cpu_online_map is updated by the _cpu_down() + * using stop_machine_run(). Since we're in irqs disabled + * section, stop_machine_run() is not exectuting, hence + * the cpu_online_map is stable. + * + * However, a cpu might have been offlined _just_ before + * we disabled irqs while entering here. + * And rcu subsystem might not yet have handled the CPU_DEAD + * notification, leading to the offlined cpu's bit + * being set in the rcp->cpumask. + * + * Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent + * sending smp_reschedule() to an offlined CPU. */ - cpumask = rcp->cpumask; + cpus_and(cpumask, rcp->cpumask, cpu_online_map); cpu_clear(rdp->cpu, cpumask); for_each_cpu_mask(cpu, cpumask) smp_send_reschedule(cpu); -- cgit v0.10.2 From 2709781be6141798162f1089df728fb218a590df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:41 +0100 Subject: I2C: S3C2410: Check ACK on byte transmission We should check for the reception of an ACK after transmitting each data byte. The address send has been correctly checking this, but the data write byte state should have also been checking for these failures. As part of the same fix, we remove the ACK checking from the receive path where it should not have been checking for an ACK which our hardware was sending. Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1305ef1..7ad22c5 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -323,7 +323,17 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * end of the message, and if so, work out what to do */ + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) { + if (iicstat & S3C2410_IICSTAT_LASTBIT) { + dev_dbg(i2c->dev, "WRITE: No Ack\n"); + + s3c24xx_i2c_stop(i2c, -ECONNREFUSED); + goto out_ack; + } + } + retry_write: + if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; writeb(byte, i2c->regs + S3C2410_IICDS); @@ -377,17 +387,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * going to do any more read/write */ - if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) && - !(is_msglast(i2c) && is_lastmsg(i2c))) { - - if (iicstat & S3C2410_IICSTAT_LASTBIT) { - dev_dbg(i2c->dev, "READ: No Ack\n"); - - s3c24xx_i2c_stop(i2c, -ECONNREFUSED); - goto out_ack; - } - } - byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; -- cgit v0.10.2 From 63f5c2891eae6b4dd0538ef094e5f256d6150d7b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:42 +0100 Subject: I2C: S3C2410: Fixup error codes returned rom a transfer. The driver should be returning -ENXIO for transfers that do not pass the initial address byte stage. Note, also small tidyups to the driver comments in the area. Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 7ad22c5..d2645da 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -290,12 +290,12 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * bus, or started a new i2c message */ - if (iicstat & S3C2410_IICSTAT_LASTBIT && + if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ dev_dbg(i2c->dev, "ack was not received\n"); - s3c24xx_i2c_stop(i2c, -EREMOTEIO); + s3c24xx_i2c_stop(i2c, -ENXIO); goto out_ack; } @@ -305,7 +305,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) i2c->state = STATE_WRITE; /* terminate the transfer if there is nothing to do - * (used by the i2c probe to find devices */ + * as this is used by the i2c probe to find devices. */ if (is_lastmsg(i2c) && i2c->msg->len == 0) { s3c24xx_i2c_stop(i2c, 0); -- cgit v0.10.2 From d150a4bbd0e5c6427e66086b139953428680160b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:43 +0100 Subject: I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device. Add a MODULE_ALIAS() statement for the i2c-s3c2410 controller to ensure that it can be autoloaded on the S3C2440 systems that we support. Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index d2645da..9e8c875 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -948,3 +948,4 @@ MODULE_DESCRIPTION("S3C24XX I2C Bus driver"); MODULE_AUTHOR("Ben Dooks, "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:s3c2410-i2c"); +MODULE_ALIAS("platform:s3c2440-i2c"); -- cgit v0.10.2 From a94c248113b86bbbc47d027a4004b70f2be298b1 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 1 Jul 2008 17:18:17 +0100 Subject: PCI: Restrict VPD read permission to root Some PCI devices will lock up if we attempt to read from VPD addresses beyond some device-dependent limit. Until we can identify these devices and adjust the file size accordingly, only let root read VPD through sysfs to prevent a DoS by normal users. Signed-off-by: Ben Hutchings Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6f3c744..1f855f0 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -738,7 +738,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) pdev->vpd->attr = attr; attr->size = pdev->vpd->ops->get_size(pdev); attr->attr.name = "vpd"; - attr->attr.mode = S_IRUGO | S_IWUSR; + attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_vpd; attr->write = pci_write_vpd; retval = sysfs_create_bin_file(&pdev->dev.kobj, attr); -- cgit v0.10.2 From 5d1a04110bfc40a86e1387b5f4382addd9aa7fbb Mon Sep 17 00:00:00 2001 From: John Linn Date: Tue, 1 Jul 2008 14:17:18 -0600 Subject: powerpc/bootwrapper: update for initrd with simpleImage This change to the makefile corrects the build of a simpleImage with initrd. Signed-off-by: John Linn Signed-off-by: Grant Likely diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 1cee2f9..095e04d 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -273,7 +273,8 @@ endif initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, \ $(patsubst dtbImage%, dtbImage.initrd%, \ - $(patsubst treeImage%, treeImage.initrd%, $(image-y)))) + $(patsubst simpleImage%, simpleImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) -- cgit v0.10.2 From 2260e63a2f313f416b31af80d02f02ef92d20d78 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 22:38:18 +0200 Subject: i2c: Documentation: fix device matching description The matching process described for new style clients in Documentation/i2c/writing-clients is classed as out-of-date as it requires the presence of an .id_table entry in the driver's i2c_driver entry. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index ee75cba..d4cd412 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -25,12 +25,23 @@ routines, and should be zero-initialized except for fields with data you provide. A client structure holds device-specific information like the driver model device node, and its I2C address. +/* iff driver uses driver model ("new style") binding model: */ + +static struct i2c_device_id foo_idtable[] = { + { "foo", my_id_for_foo }, + { "bar", my_id_for_bar }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, foo_idtable); + static struct i2c_driver foo_driver = { .driver = { .name = "foo", }, /* iff driver uses driver model ("new style") binding model: */ + .id_table = foo_ids, .probe = foo_probe, .remove = foo_remove, @@ -173,10 +184,9 @@ handle may be used during foo_probe(). If foo_probe() reports success (zero not a negative status code) it may save the handle and use it until foo_remove() returns. That binding model is used by most Linux drivers. -Drivers match devices when i2c_client.driver_name and the driver name are -the same; this approach is used in several other busses that don't have -device typing support in the hardware. The driver and module name should -match, so hotplug/coldplug mechanisms will modprobe the driver. +The probe function is called when an entry in the id_table name field +matches the device's name. It is passed the entry that was matched so +the driver knows which one in the table matched. Device Creation (Standard driver model) -- cgit v0.10.2 From 8e29da9ee8958cc17e27f4053420f1c982614793 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 1 Jul 2008 22:38:18 +0200 Subject: i2c: Fix bad hint about irqs in i2c.h i2c.h mentions -1 as a not-issued irq. This false hint was taken by of_i2c and caused crashes. Don't give any advice as 'no irq' is not consistent across all architectures yet and it is not needed internally by the i2c-core. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare diff --git a/include/linux/i2c.h b/include/linux/i2c.h index fb9af6a..8dc7301 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -171,7 +171,7 @@ struct i2c_client { struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /* and our access routines */ struct device dev; /* the device structure */ - int irq; /* irq issued by device (or -1) */ + int irq; /* irq issued by device */ struct list_head list; /* DEPRECATED */ struct completion released; }; -- cgit v0.10.2 From 1e6d1f260611387a7b4e6eae4d1dd6f62e53714d Mon Sep 17 00:00:00 2001 From: John Linn Date: Tue, 1 Jul 2008 10:52:41 -0700 Subject: powerpc/legacy_serial: Bail if reg-offset/shift properties are present The legacy serial driver does not work with an 8250 type UART that is described in the device tree with the reg-offset and reg-shift properties. This change makes legacy_serial ignore these devices. Signed-off-by: John Linn Signed-off-by: Grant Likely diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 61dd174..cf37f5c 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -136,6 +136,11 @@ static int __init add_legacy_soc_port(struct device_node *np, if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; + /* if reg-shift or offset, don't try to use it */ + if ((of_get_property(np, "reg-shift", NULL) != NULL) || + (of_get_property(np, "reg-offset", NULL) != NULL)) + return -1; + /* if rtas uses this device, don't try to use it as well */ if (of_get_property(np, "used-by-rtas", NULL) != NULL) return -1; -- cgit v0.10.2 From 18d76ac9a47742558bca3bbc2f7c41870ac744c8 Mon Sep 17 00:00:00 2001 From: Tim Yamin Date: Tue, 17 Jun 2008 09:33:14 +0100 Subject: powerpc/mpc5200: Fix lite5200b suspend/resume Suspend/resume ("echo mem > /sys/power/state") does not work with vanilla kernels -- the system does not suspend correctly and just hangs. This patch fixes this so suspend/resume works: 1) of_iomap does not map the whole 0xC000 of the MPC5200 immr so saving registers does not work. 2) PCI registers need to be saved and restored. Signed-off-by: Tim Yamin Signed-off-by: Grant Likely diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c index 41c7fd9..fe92e65 100644 --- a/arch/powerpc/platforms/52xx/lite5200_pm.c +++ b/arch/powerpc/platforms/52xx/lite5200_pm.c @@ -14,6 +14,7 @@ static struct mpc52xx_sdma __iomem *bes; static struct mpc52xx_xlb __iomem *xlb; static struct mpc52xx_gpio __iomem *gps; static struct mpc52xx_gpio_wkup __iomem *gpw; +static void __iomem *pci; static void __iomem *sram; static const int sram_size = 0x4000; /* 16 kBytes */ static void __iomem *mbar; @@ -50,6 +51,8 @@ static int lite5200_pm_prepare(void) { .type = "builtin", .compatible = "mpc5200", }, /* efika */ {} }; + u64 regaddr64 = 0; + const u32 *regaddr_p; /* deep sleep? let mpc52xx code handle that */ if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) @@ -60,8 +63,12 @@ static int lite5200_pm_prepare(void) /* map registers */ np = of_find_matching_node(NULL, immr_ids); - mbar = of_iomap(np, 0); + regaddr_p = of_get_address(np, 0, NULL, NULL); + if (regaddr_p) + regaddr64 = of_translate_address(np, regaddr_p); of_node_put(np); + + mbar = ioremap((u32) regaddr64, 0xC000); if (!mbar) { printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__); return -ENOSYS; @@ -71,6 +78,7 @@ static int lite5200_pm_prepare(void) pic = mbar + 0x500; gps = mbar + 0xb00; gpw = mbar + 0xc00; + pci = mbar + 0xd00; bes = mbar + 0x1200; xlb = mbar + 0x1f00; sram = mbar + 0x8000; @@ -85,6 +93,7 @@ static struct mpc52xx_sdma sbes; static struct mpc52xx_xlb sxlb; static struct mpc52xx_gpio sgps; static struct mpc52xx_gpio_wkup sgpw; +static char spci[0x200]; static void lite5200_save_regs(void) { @@ -94,6 +103,7 @@ static void lite5200_save_regs(void) _memcpy_fromio(&sxlb, xlb, sizeof(*xlb)); _memcpy_fromio(&sgps, gps, sizeof(*gps)); _memcpy_fromio(&sgpw, gpw, sizeof(*gpw)); + _memcpy_fromio(spci, pci, 0x200); _memcpy_fromio(saved_sram, sram, sram_size); } @@ -103,6 +113,8 @@ static void lite5200_restore_regs(void) int i; _memcpy_toio(sram, saved_sram, sram_size); + /* PCI Configuration */ + _memcpy_toio(pci, spci, 0x200); /* * GPIOs. Interrupt Master Enable has higher address then other -- cgit v0.10.2 From 77a538d5aa25a8866606a1faa4300c9aa2a59dfc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 1 Jul 2008 17:22:48 -0700 Subject: ipv4: fix sysctl documentation of time related values These sysctl values are time related and all use the same routine (proc_dointvec_jiffies) that internally converts from seconds to jiffies. The code is fine, the documentation is just wrong. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 17a6e46..17f1f91 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -81,23 +81,23 @@ inet_peer_minttl - INTEGER Minimum time-to-live of entries. Should be enough to cover fragment time-to-live on the reassembling side. This minimum time-to-live is guaranteed if the pool size is less than inet_peer_threshold. - Measured in jiffies(1). + Measured in seconds. inet_peer_maxttl - INTEGER Maximum time-to-live of entries. Unused entries will expire after this period of time if there is no memory pressure on the pool (i.e. when the number of entries in the pool is very small). - Measured in jiffies(1). + Measured in seconds. inet_peer_gc_mintime - INTEGER Minimum interval between garbage collection passes. This interval is in effect under high memory pressure on the pool. - Measured in jiffies(1). + Measured in seconds. inet_peer_gc_maxtime - INTEGER Minimum interval between garbage collection passes. This interval is in effect under low (or absent) memory pressure on the pool. - Measured in jiffies(1). + Measured in seconds. TCP variables: @@ -794,10 +794,6 @@ tag - INTEGER Allows you to write a number, which can be used as required. Default value is 0. -(1) Jiffie: internal timeunit for the kernel. On the i386 1/100s, on the -Alpha 1/1024s. See the HZ define in /usr/include/asm/param.h for the exact -value on your system. - Alexey Kuznetsov. kuznet@ms2.inr.ac.ru -- cgit v0.10.2 From ff31ab56c0e900235f653e375fc3b01ba2d8d6a3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:52:38 -0700 Subject: net-sched: change tcf_destroy_chain() to clear start of filter list Pass double tcf_proto pointers to tcf_destroy_chain() to make it clear the start of the filter list for more consistency. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index ab502ec..a87fc03 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -178,7 +178,7 @@ extern struct Qdisc *qdisc_alloc(struct net_device *dev, struct Qdisc_ops *ops); extern struct Qdisc *qdisc_create_dflt(struct net_device *dev, struct Qdisc_ops *ops, u32 parentid); extern void tcf_destroy(struct tcf_proto *tp); -extern void tcf_destroy_chain(struct tcf_proto *fl); +extern void tcf_destroy_chain(struct tcf_proto **fl); static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff_head *list) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 635b996..5d09e86 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -323,8 +323,7 @@ static void wme_qdiscop_destroy(struct Qdisc* qd) struct ieee80211_hw *hw = &local->hw; int queue; - tcf_destroy_chain(q->filter_list); - q->filter_list = NULL; + tcf_destroy_chain(&q->filter_list); for (queue=0; queue < hw->queues; queue++) { skb_queue_purge(&q->requeued[queue]); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index c40773c..10f01ad 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1252,12 +1252,12 @@ void tcf_destroy(struct tcf_proto *tp) kfree(tp); } -void tcf_destroy_chain(struct tcf_proto *fl) +void tcf_destroy_chain(struct tcf_proto **fl) { struct tcf_proto *tp; - while ((tp = fl) != NULL) { - fl = tp->next; + while ((tp = *fl) != NULL) { + *fl = tp->next; tcf_destroy(tp); } } diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 3352734..8e5f70b 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -160,7 +160,7 @@ static void atm_tc_put(struct Qdisc *sch, unsigned long cl) *prev = flow->next; pr_debug("atm_tc_put: qdisc %p\n", flow->q); qdisc_destroy(flow->q); - tcf_destroy_chain(flow->filter_list); + tcf_destroy_chain(&flow->filter_list); if (flow->sock) { pr_debug("atm_tc_put: f_count %d\n", file_count(flow->sock->file)); @@ -588,8 +588,7 @@ static void atm_tc_destroy(struct Qdisc *sch) pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p); /* races ? */ while ((flow = p->flows)) { - tcf_destroy_chain(flow->filter_list); - flow->filter_list = NULL; + tcf_destroy_chain(&flow->filter_list); if (flow->ref > 1) printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow, flow->ref); diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 09969c1..2a3c97f 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -1704,7 +1704,7 @@ static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl) BUG_TRAP(!cl->filters); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); qdisc_destroy(cl->q); qdisc_put_rtab(cl->R_tab); gen_kill_estimator(&cl->bstats, &cl->rate_est); @@ -1728,10 +1728,8 @@ cbq_destroy(struct Qdisc* sch) * be bound to classes which have been destroyed already. --TGR '04 */ for (h = 0; h < 16; h++) { - for (cl = q->classes[h]; cl; cl = cl->next) { - tcf_destroy_chain(cl->filter_list); - cl->filter_list = NULL; - } + for (cl = q->classes[h]; cl; cl = cl->next) + tcf_destroy_chain(&cl->filter_list); } for (h = 0; h < 16; h++) { struct cbq_class *next; diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 64465ba..c4c1317 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -416,7 +416,7 @@ static void dsmark_destroy(struct Qdisc *sch) pr_debug("dsmark_destroy(sch %p,[qdisc %p])\n", sch, p); - tcf_destroy_chain(p->filter_list); + tcf_destroy_chain(&p->filter_list); qdisc_destroy(p->q); kfree(p->mask); } diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index fdfaa3f..eca83a3 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1123,7 +1123,7 @@ hfsc_destroy_class(struct Qdisc *sch, struct hfsc_class *cl) { struct hfsc_sched *q = qdisc_priv(sch); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); qdisc_destroy(cl->qdisc); gen_kill_estimator(&cl->bstats, &cl->rate_est); if (cl != &q->root) diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 6807c97..3fb58f4 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1238,7 +1238,7 @@ static void htb_destroy_class(struct Qdisc *sch, struct htb_class *cl) qdisc_put_rtab(cl->rate); qdisc_put_rtab(cl->ceil); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); while (!list_empty(&cl->children)) htb_destroy_class(sch, list_entry(cl->children.next, @@ -1267,7 +1267,7 @@ static void htb_destroy(struct Qdisc *sch) and surprisingly it worked in 2.4. But it must precede it because filter need its target class alive to be able to call unbind_filter on it (without Oops). */ - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); while (!list_empty(&q->root)) htb_destroy_class(sch, list_entry(q->root.next, diff --git a/net/sched/sch_ingress.c b/net/sched/sch_ingress.c index 274b1dd..956c80a 100644 --- a/net/sched/sch_ingress.c +++ b/net/sched/sch_ingress.c @@ -104,7 +104,7 @@ static void ingress_destroy(struct Qdisc *sch) { struct ingress_qdisc_data *p = qdisc_priv(sch); - tcf_destroy_chain(p->filter_list); + tcf_destroy_chain(&p->filter_list); } static int ingress_dump(struct Qdisc *sch, struct sk_buff *skb) diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 4aa2b45..5532f10 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -219,7 +219,7 @@ prio_destroy(struct Qdisc* sch) int prio; struct prio_sched_data *q = qdisc_priv(sch); - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); for (prio=0; priobands; prio++) qdisc_destroy(q->queues[prio]); } diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index f0463d7..6a97afb 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -520,7 +520,7 @@ static void sfq_destroy(struct Qdisc *sch) { struct sfq_sched_data *q = qdisc_priv(sch); - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); q->perturb_period = 0; del_timer_sync(&q->perturb_timer); } -- cgit v0.10.2 From a4aebb83cf0da0363684f1c339f7e6149a3e74c1 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:53:09 -0700 Subject: net-sched: fix filter destruction in atm/hfsc qdisc destruction Filters need to be destroyed before beginning to destroy classes since the destination class needs to still be alive to unbind the filter. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 8e5f70b..db0e23a 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -586,9 +586,11 @@ static void atm_tc_destroy(struct Qdisc *sch) struct atm_flow_data *flow; pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p); + for (flow = p->flows; flow; flow = flow->next) + tcf_destroy_chain(&flow->filter_list); + /* races ? */ while ((flow = p->flows)) { - tcf_destroy_chain(&flow->filter_list); if (flow->ref > 1) printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow, flow->ref); diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index eca83a3..e817aa0 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1541,6 +1541,10 @@ hfsc_destroy_qdisc(struct Qdisc *sch) unsigned int i; for (i = 0; i < HFSC_HSIZE; i++) { + list_for_each_entry(cl, &q->clhash[i], hlist) + tcf_destroy_chain(&cl->filter_list); + } + for (i = 0; i < HFSC_HSIZE; i++) { list_for_each_entry_safe(cl, next, &q->clhash[i], hlist) hfsc_destroy_class(sch, cl); } -- cgit v0.10.2 From 8487460720fd03a0f4ecd032f017b0a8468028da Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:55:09 -0700 Subject: netlink: Unneeded local variable We already have a variable, which has the same capability. Signed-off-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 9b97f80..349aba1 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -886,7 +886,7 @@ retry: return netlink_unicast_kernel(sk, skb); if (sk_filter(sk, skb)) { - int err = skb->len; + err = skb->len; kfree_skb(skb); sock_put(sk); return err; -- cgit v0.10.2 From 8fde8a076940969d32805b853efdce8b988d7dda Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:55:40 -0700 Subject: net: Tyop of sk_filter() comment Parameter "needlock" no long exists. Signed-off-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/core/filter.c b/net/core/filter.c index 4f83697..df37443 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -68,7 +68,6 @@ static inline void *load_pointer(struct sk_buff *skb, int k, * sk_filter - run a packet through a socket filter * @sk: sock associated with &sk_buff * @skb: buffer to filter - * @needlock: set to 1 if the sock is not locked by caller. * * Run the filter code and then cut skb->data to correct size returned by * sk_run_filter. If pkt_len is 0 we toss packet. If skb->len is smaller -- cgit v0.10.2 From 93b3cff9915322d6fa36bac0064714a7076230e4 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:57:19 -0700 Subject: netdevice: Fix wrong string handle in kernel command line parsing v1->v2: Use strlcpy() to ensure s[i].name be null-termination. 1. In netdev_boot_setup_add(), a long name will leak. ex. : dev=21,0x1234,0x1234,0x2345,eth123456789verylongname......... 2. In netdev_boot_setup_check(), mismatch will happen if s[i].name is a substring of dev->name. ex. : dev=...eth1 dev=...eth11 [ With feedback from Ben Hutchings. ] Signed-off-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 56b4657..fca23a3 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -454,7 +454,7 @@ static int netdev_boot_setup_add(char *name, struct ifmap *map) for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { if (s[i].name[0] == '\0' || s[i].name[0] == ' ') { memset(s[i].name, 0, sizeof(s[i].name)); - strcpy(s[i].name, name); + strlcpy(s[i].name, name, IFNAMSIZ); memcpy(&s[i].map, map, sizeof(s[i].map)); break; } @@ -479,7 +479,7 @@ int netdev_boot_setup_check(struct net_device *dev) for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { if (s[i].name[0] != '\0' && s[i].name[0] != ' ' && - !strncmp(dev->name, s[i].name, strlen(s[i].name))) { + !strcmp(dev->name, s[i].name)) { dev->irq = s[i].map.irq; dev->base_addr = s[i].map.base_addr; dev->mem_start = s[i].map.mem_start; -- cgit v0.10.2 From 2fe195cfe3e53c144d247b2768e37732e8eae4d8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:59:37 -0700 Subject: net: fib_rules: fix error code for unsupported families The errno code returned must be negative. Fixes "RTNETLINK answers: Unknown error 18446744073709551519". Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index e3e9ab0..277a230 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -226,7 +226,7 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) ops = lookup_rules_ops(net, frh->family); if (ops == NULL) { - err = EAFNOSUPPORT; + err = -EAFNOSUPPORT; goto errout; } @@ -365,7 +365,7 @@ static int fib_nl_delrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) ops = lookup_rules_ops(net, frh->family); if (ops == NULL) { - err = EAFNOSUPPORT; + err = -EAFNOSUPPORT; goto errout; } -- cgit v0.10.2 From c7f1b2044191a82e7f0a1a674751ed582289e2e0 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Wed, 2 Jul 2008 09:34:28 +0100 Subject: dm crypt: use cond_resched Add cond_resched() to prevent monopolising CPU when processing large bios. dm-crypt processes encryption of bios in sector units. If the bio request is big it can spend a long time in the encryption call. Signed-off-by: Milan Broz Tested-by: Yan Li Signed-off-by: Andrew Morton Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 835def1..ab6a61d 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -432,6 +432,7 @@ static int crypt_convert(struct crypt_config *cc, case 0: atomic_dec(&ctx->pending); ctx->sector++; + cond_resched(); continue; /* error */ -- cgit v0.10.2 From 06f3ed23b1e1038da649c4836b51fe035f5536bd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 2 Jul 2008 11:03:33 -0300 Subject: V4L/DVB (8178): uvc: Fix compilation breakage for the other drivers, if uvc is selected UVC makefile defines obj as: obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o Instead of: obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o Due to that, if uvc is selected, all obj-y or obj-m that were added to compilation were forget. This breaks a proper kernel build. Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile index fb39bbf..968c199 100644 --- a/drivers/media/video/uvc/Makefile +++ b/drivers/media/video/uvc/Makefile @@ -1,3 +1,3 @@ uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \ uvc_status.o uvc_isight.o -obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o +obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o -- cgit v0.10.2 From 99cb233d60cbe644203f19938c729ea2bb004d70 Mon Sep 17 00:00:00 2001 From: Benjamin Li Date: Wed, 2 Jul 2008 10:59:04 -0700 Subject: PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev. For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the VPD end tag will hang the device. This problem was initially observed when a vpd entry was created in sysfs ('/sys/bus/pci/devices//vpd'). A read to this sysfs entry will dump 32k of data. Reading a full 32k will cause an access beyond the VPD end tag causing the device to hang. Once the device is hung, the bnx2 driver will not be able to reset the device. We believe that it is legal to read beyond the end tag and therefore the solution is to limit the read/write length. A majority of this patch is from Matthew Wilcox who gave code for reworking the PCI vpd size information. A PCI quirk added for the Broadcom NIC's to limit the read/write's. Signed-off-by: Benjamin Li Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes diff --git a/drivers/pci/access.c b/drivers/pci/access.c index ec8f700..39bb96b 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -178,8 +178,7 @@ static int pci_vpd_pci22_read(struct pci_dev *dev, int pos, int size, int ret; int begin, end, i; - if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || - size > PCI_VPD_PCI22_SIZE - pos) + if (pos < 0 || pos > vpd->base.len || size > vpd->base.len - pos) return -EINVAL; if (size == 0) return 0; @@ -223,8 +222,8 @@ static int pci_vpd_pci22_write(struct pci_dev *dev, int pos, int size, u32 val; int ret; - if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || pos & 3 || - size > PCI_VPD_PCI22_SIZE - pos || size < 4) + if (pos < 0 || pos > vpd->base.len || pos & 3 || + size > vpd->base.len - pos || size < 4) return -EINVAL; val = (u8) *buf++; @@ -255,11 +254,6 @@ out: return 4; } -static int pci_vpd_pci22_get_size(struct pci_dev *dev) -{ - return PCI_VPD_PCI22_SIZE; -} - static void pci_vpd_pci22_release(struct pci_dev *dev) { kfree(container_of(dev->vpd, struct pci_vpd_pci22, base)); @@ -268,7 +262,6 @@ static void pci_vpd_pci22_release(struct pci_dev *dev) static struct pci_vpd_ops pci_vpd_pci22_ops = { .read = pci_vpd_pci22_read, .write = pci_vpd_pci22_write, - .get_size = pci_vpd_pci22_get_size, .release = pci_vpd_pci22_release, }; @@ -284,6 +277,7 @@ int pci_vpd_pci22_init(struct pci_dev *dev) if (!vpd) return -ENOMEM; + vpd->base.len = PCI_VPD_PCI22_SIZE; vpd->base.ops = &pci_vpd_pci22_ops; spin_lock_init(&vpd->lock); vpd->cap = cap; diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 1f855f0..9c71858 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -736,7 +736,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) attr = kzalloc(sizeof(*attr), GFP_ATOMIC); if (attr) { pdev->vpd->attr = attr; - attr->size = pdev->vpd->ops->get_size(pdev); + attr->size = pdev->vpd->len; attr->attr.name = "vpd"; attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_vpd; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0a497c1b..00408c9 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -21,11 +21,11 @@ extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); struct pci_vpd_ops { int (*read)(struct pci_dev *dev, int pos, int size, char *buf); int (*write)(struct pci_dev *dev, int pos, int size, const char *buf); - int (*get_size)(struct pci_dev *dev); void (*release)(struct pci_dev *dev); }; struct pci_vpd { + unsigned int len; struct pci_vpd_ops *ops; struct bin_attribute *attr; /* descriptor for sysfs VPD entry */ }; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index dabb563..a3497dc 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1670,6 +1670,48 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); +/* + * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the + * VPD end tag will hang the device. This problem was initially + * observed when a vpd entry was created in sysfs + * ('/sys/bus/pci/devices//vpd'). A read to this sysfs entry + * will dump 32k of data. Reading a full 32k will cause an access + * beyond the VPD end tag causing the device to hang. Once the device + * is hung, the bnx2 driver will not be able to reset the device. + * We believe that it is legal to read beyond the end tag and + * therefore the solution is to limit the read/write length. + */ +static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) +{ + /* Only disable the VPD capability for 5706, 5708, and 5709 rev. A */ + if ((dev->device == PCI_DEVICE_ID_NX2_5706) || + (dev->device == PCI_DEVICE_ID_NX2_5708) || + ((dev->device == PCI_DEVICE_ID_NX2_5709) && + (dev->revision & 0xf0) == 0x0)) { + if (dev->vpd) + dev->vpd->len = 0x80; + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); + #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually -- cgit v0.10.2 From a13307cef8bf51990ef1d525b1cbdcc2cfe07e2a Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 1 Jul 2008 20:02:23 -0600 Subject: PCI: acpiphp: cleanup notify handler on all root bridges During the development of the physical PCI slot patch series, Gary Hade kept on reporting strange oopses due to interactions between pci_slot and acpiphp. http://lkml.org/lkml/2007/11/28/319 find_root_bridges() unconditionally installs handle_hotplug_event_bridge() as an ACPI_SYSTEM_NOTIFY handler for all root bridges. However, during module cleanup, remove_bridge() will only remove the notify handler iff the root bridge had a hot-pluggable slot directly underneath. That is: root bridge -> hotplug slot But, if the topology looks like either of the following: root bridge -> non-hotplug slot root bridge -> p2p bridge -> hotplug slot Then we currently do not remove the notify handler from that root bridge. This can cause a kernel oops if we modprobe acpiphp later and it gets loaded somewhere else in memory. If the root bridge then receives a hotplug event, it will then attempt to call a stale, non-existent notify handler and we blow up. Much thanks goes to Gary Hade for his persistent debugging efforts. Signed-off-by: Alex Chiang Signed-off-by: Gary Hade Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 648596d..91156f8 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -700,9 +700,10 @@ cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, cleanup_p2p_bridge, NULL, NULL); - if (!(bridge = acpiphp_handle_to_bridge(handle))) - return AE_OK; - cleanup_bridge(bridge); + bridge = acpiphp_handle_to_bridge(handle); + if (bridge) + cleanup_bridge(bridge); + return AE_OK; } @@ -715,9 +716,19 @@ static void remove_bridge(acpi_handle handle) acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, cleanup_p2p_bridge, NULL, NULL); + /* + * On root bridges with hotplug slots directly underneath (ie, + * no p2p bridge inbetween), we call cleanup_bridge(). + * + * The else clause cleans up root bridges that either had no + * hotplug slots at all, or had a p2p bridge underneath. + */ bridge = acpiphp_handle_to_bridge(handle); if (bridge) cleanup_bridge(bridge); + else + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + handle_hotplug_event_bridge); } static struct pci_dev * get_apic_pci_info(acpi_handle handle) -- cgit v0.10.2 From ec04fd60fd74a9db9c63fe11d519be3642cabfdd Mon Sep 17 00:00:00 2001 From: Rick Farrington Date: Tue, 1 Jul 2008 09:20:33 +0800 Subject: iwlwifi: fix incorrect 5GHz rates reported in monitor mode This patch fixes the rates reported in monitor mode operation (Wireshark) for iwlwifi. Previously, packets with rates of 6M..24M would be reported incorrectly and packets with rates of 36M..54M would not passed up the stack. Signed-off-by: Rick Farrington Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c index 62a3d8f..f5387a7 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945.c @@ -588,8 +588,12 @@ static void iwl3945_add_radiotap(struct iwl3945_priv *priv, if (rate == -1) iwl3945_rt->rt_rate = 0; - else + else { + if (stats->band == IEEE80211_BAND_5GHZ) + rate += IWL_FIRST_OFDM_RATE; + iwl3945_rt->rt_rate = iwl3945_rates[rate].ieee; + } /* antenna number */ antenna = phy_flags_hw & RX_RES_PHY_FLAGS_ANTENNA_MSK; diff --git a/drivers/net/wireless/iwlwifi/iwl-4965.c b/drivers/net/wireless/iwlwifi/iwl-4965.c index bf19eb8..de330ae 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965.c @@ -3528,8 +3528,12 @@ static void iwl4965_add_radiotap(struct iwl_priv *priv, if (rate == -1) iwl4965_rt->rt_rate = 0; - else + else { + if (stats->band == IEEE80211_BAND_5GHZ) + rate += IWL_FIRST_OFDM_RATE; + iwl4965_rt->rt_rate = iwl4965_rates[rate].ieee; + } /* * "antenna number" -- cgit v0.10.2 From 6afe6828b19b4567768264831d101026cb5510ff Mon Sep 17 00:00:00 2001 From: Zhu Yi Date: Tue, 1 Jul 2008 09:20:34 +0800 Subject: iwlwifi: drop skb silently for Tx request in monitor mode This patch fixes the problem to keep mac80211 resubmitting SKBs when Tx request cannot be met in monitor mode. Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index b1b3c52..6027e11 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -6687,7 +6687,8 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { IWL_DEBUG_MAC80211("leave - monitor\n"); - return -1; + dev_kfree_skb_any(skb); + return 0; } IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 5ed16ce..0bd55bb 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -6237,7 +6237,8 @@ static int iwl4965_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, if (priv->iw_mode == IEEE80211_IF_TYPE_MNTR) { IWL_DEBUG_MAC80211("leave - monitor\n"); - return -1; + dev_kfree_skb_any(skb); + return 0; } IWL_DEBUG_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len, -- cgit v0.10.2 From 7b58ccfe32f40eca8c8ca29aa723a5d0e814f0c9 Mon Sep 17 00:00:00 2001 From: "andrey@cozybit.com" Date: Tue, 1 Jul 2008 11:43:53 -0700 Subject: libertas: support USB persistence on suspend/resume (resend) Handle .reset_resume() so that libertas can survive suspend/resume without reloading the firmware. Signed-off-by: Andrey Yurovsky Acked-by: Deepak Saxena Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/if_usb.c b/drivers/net/wireless/libertas/if_usb.c index 8032df7..36288b2 100644 --- a/drivers/net/wireless/libertas/if_usb.c +++ b/drivers/net/wireless/libertas/if_usb.c @@ -925,6 +925,7 @@ static struct usb_driver if_usb_driver = { .id_table = if_usb_table, .suspend = if_usb_suspend, .resume = if_usb_resume, + .reset_resume = if_usb_resume, }; static int __init if_usb_init_module(void) -- cgit v0.10.2 From 83680cdbcecd1fd284ad4df060d12bf214bb63a8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 1 Jul 2008 13:55:25 +0200 Subject: drivers/input/ff-core.c needs Commit 656acd2bbc4ce7f224de499ee255698701396c48 ("Input: fix locking in force-feedback core") causes the following regression on m68k: | linux/drivers/input/ff-core.c: In function 'input_ff_upload': | linux/drivers/input/ff-core.c:172: error: dereferencing pointer to incomplete type | linux/drivers/input/ff-core.c: In function 'erase_effect': | linux/drivers/input/ff-core.c:197: error: dereferencing pointer to incomplete type | linux/drivers/input/ff-core.c:204: error: dereferencing pointer to incomplete type | make[4]: *** [drivers/input/ff-core.o] Error 1 As the incomplete type is `struct task_struct', including fixes it. Signed-off-by: Geert Uytterhoeven Acked-by: Dmitry Torokhov Signed-off-by: Linus Torvalds diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 4c01464..72c63e5 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -28,6 +28,7 @@ #include #include #include +#include /* * Check that the effect_id is a valid effect and whether the user -- cgit v0.10.2 From 3d25802e3ba7c82457b5c12bbfeefe391d8a333e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 1 Jul 2008 12:32:52 -0700 Subject: DRM/i915: only use tiled blits on 965+ When scheduled swaps occur, we need to blit between front & back buffers. If the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit, but only on 965 chips, since it will cause corruption on pre-965 (e.g. 945). Bug reported by and fix tested by Tomas Janousek . Signed-off-by: Jesse Barnes Acked-by: Dave Airlie Signed-off-by: Linus Torvalds diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c index f7f16e7..df03611 100644 --- a/drivers/char/drm/i915_irq.c +++ b/drivers/char/drm/i915_irq.c @@ -62,11 +62,11 @@ static void i915_vblank_tasklet(struct drm_device *dev) u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); RING_LOCALS; - if (sarea_priv->front_tiled) { + if (IS_I965G(dev) && sarea_priv->front_tiled) { cmd |= XY_SRC_COPY_BLT_DST_TILED; dst_pitch >>= 2; } - if (sarea_priv->back_tiled) { + if (IS_I965G(dev) && sarea_priv->back_tiled) { cmd |= XY_SRC_COPY_BLT_SRC_TILED; src_pitch >>= 2; } -- cgit v0.10.2 From 3e2a078ca6a0d3122bbf2b904cd7ccf21a5ca21d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Jun 2008 17:40:08 +0100 Subject: tty: Fix inverted logic in send_break Not sure how this came to get inverted but it appears to have been my mess up. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index e94bee0..7501310 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -3322,7 +3322,7 @@ static int send_break(struct tty_struct *tty, unsigned int duration) msleep_interruptible(duration); tty->ops->break_ctl(tty, 0); tty_write_unlock(tty); - if (!signal_pending(current)) + if (signal_pending(current)) return -EINTR; return 0; } -- cgit v0.10.2 From 81b23b4a7acd9b37a269c62d02479d4f645dd20a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 3 Jul 2008 03:22:02 -0700 Subject: tcp: net/ipv4/tcp.c needs linux/scatterlist.h alpha: net/ipv4/tcp.c: In function 'tcp_calc_md5_hash': net/ipv4/tcp.c:2479: error: implicit declaration of function 'sg_init_table' net/ipv4/tcp.c:2482: error: implicit declaration of function 'sg_set_buf' net/ipv4/tcp.c:2507: error: implicit declaration of function 'sg_mark_end' Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 850825d..de53024 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -255,6 +255,7 @@ #include #include #include +#include #include #include #include -- cgit v0.10.2 From 374e7b59498ce0785b3727794b351221528a5159 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Thu, 3 Jul 2008 03:31:21 -0700 Subject: tcp: fix a size_t < 0 comparison in tcp_read_sock should be of type int (not size_t) since recv_actor can return negative values and it is also used in a < 0 comparison. Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index de53024..1d723de 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1209,7 +1209,8 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc, return -ENOTCONN; while ((skb = tcp_recv_skb(sk, seq, &offset)) != NULL) { if (offset < skb->len) { - size_t used, len; + int used; + size_t len; len = skb->len - offset; /* Stop reading if we hit a patch of urgent data */ -- cgit v0.10.2 From ab1b20467cd2214ad89a95d007047cd2a6b5bf5d Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Thu, 3 Jul 2008 03:53:42 -0700 Subject: bridge: fix use-after-free in br_cleanup_bridges() Unregistering a bridge device may cause virtual devices stacked on the bridge, like vlan or macvlan devices, to be unregistered as well. br_cleanup_bridges() uses for_each_netdev_safe() to iterate over all devices during cleanup. This is not enough however, if one of the additionally unregistered devices is next in the list to the bridge device, it will get freed as well and the iteration continues on the freed element. Restart iteration after each bridge device removal from the beginning to fix this, similar to what rtnl_link_unregister() does. Signed-off-by: Patrick McHardy Acked-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c index c2397f5..f38cc53 100644 --- a/net/bridge/br_if.c +++ b/net/bridge/br_if.c @@ -442,12 +442,16 @@ int br_del_if(struct net_bridge *br, struct net_device *dev) void __exit br_cleanup_bridges(void) { - struct net_device *dev, *nxt; + struct net_device *dev; rtnl_lock(); - for_each_netdev_safe(&init_net, dev, nxt) - if (dev->priv_flags & IFF_EBRIDGE) +restart: + for_each_netdev(&init_net, dev) { + if (dev->priv_flags & IFF_EBRIDGE) { del_br(dev->priv); + goto restart; + } + } rtnl_unlock(); } -- cgit v0.10.2 From 54364b752ef0c91fe92684df000cc4593d1e8963 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Sun, 29 Jun 2008 21:48:11 +0200 Subject: Add missing skb->dev assignment in Frame Relay RX code Commit 4c13eb6657fe9ef7b4dc8f1a405c902e9e5234e0 ([ETH]: Make eth_type_trans set skb->dev like the other *_type_trans) removed skb->dev assignment from hdlc_fr.c:fr_rx(). Unfortunately it was also needed for cases other than eth_type_trans(). Adding it back. It's quite serious and may be a security risk as it causes a wrong input interface indication (the physical hdlcX instead of logical pvcX). Probably -stable class fix. Signed-off-by: Krzysztof Halasa Signed-off-by: Jeff Garzik diff --git a/drivers/net/wan/hdlc_fr.c b/drivers/net/wan/hdlc_fr.c index 520bb0b..6d35155 100644 --- a/drivers/net/wan/hdlc_fr.c +++ b/drivers/net/wan/hdlc_fr.c @@ -1008,6 +1008,7 @@ static int fr_rx(struct sk_buff *skb) stats->rx_bytes += skb->len; if (pvc->state.becn) stats->rx_compressed++; + skb->dev = dev; netif_rx(skb); return NET_RX_SUCCESS; } else { -- cgit v0.10.2 From 97bff0953dd45a633fa69e1a650d612f5610a60b Mon Sep 17 00:00:00 2001 From: Tobias Diedrich Date: Thu, 3 Jul 2008 23:54:56 -0700 Subject: forcedeth: fix lockdep warning on ethtool -s After enabling CONFIG_LOCKDEP and CONFIG_PROVE_LOCKING I get the following warning when ethtool -s is first called on one of the forcedeth ports: ================================= [ INFO: inconsistent lock state ] 2.6.26-rc4 #28 --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. ethtool/1985 [HC0[0]:SC0[1]:HE1:SE0] takes: (&np->lock){++..}, at: [] nv_set_settings+0xc8/0x3de [forcedeth] {in-hardirq-W} state was registered at: [] 0xffffffffffffffff irq event stamp: 3606 hardirqs last enabled at (3605): [] _spin_unlock_irqrestore+0x3f/0x68 hardirqs last disabled at (3604): [] _spin_lock_irqsave+0x13/0x46 softirqs last enabled at (3534): [] __do_softirq+0xbc/0xc5 softirqs last disabled at (3606): [] _spin_lock_bh+0x11/0x41 other info that might help us debug this: 2 locks held by ethtool/1985: #0: (rtnl_mutex){--..}, at: [] rtnl_lock+0x12/0x14 #1: (_xmit_ETHER){-+..}, at: [] nv_set_settings+0xb3/0x3de [forcedeth] stack backtrace: Pid: 1985, comm: ethtool Not tainted 2.6.26-rc4 #28 Call Trace: [] print_usage_bug+0x162/0x173 [] mark_lock+0x231/0x41f [] __lock_acquire+0x4e7/0xcac [] ? trace_hardirqs_on+0xf1/0x115 [] ? disable_irq_nosync+0x6f/0x7b [] lock_acquire+0x55/0x6e [] ? :forcedeth:nv_set_settings+0xc8/0x3de [] _spin_lock+0x2f/0x3c [] :forcedeth:nv_set_settings+0xc8/0x3de [] dev_ethtool+0x186/0xea3 [] ? mutex_lock_nested+0x243/0x275 [] ? debug_mutex_free_waiter+0x46/0x4a [] ? mutex_lock_nested+0x266/0x275 [] dev_ioctl+0x4eb/0x600 [] ? _spin_unlock_irqrestore+0x3f/0x68 [] sock_ioctl+0x1f5/0x202 [] vfs_ioctl+0x2a/0x77 [] do_vfs_ioctl+0x25b/0x270 [] ? trace_hardirqs_on_thunk+0x35/0x3a [] sys_ioctl+0x42/0x65 [] system_call_after_swapgs+0x7b/0x80 This is caused by the following snippet in nv_set_settings: netif_carrier_off(dev); if (netif_running(dev)) { nv_disable_irq(dev); netif_tx_lock_bh(dev); spin_lock(&np->lock); /* stop engines */ nv_stop_rxtx(dev); spin_unlock(&np->lock); netif_tx_unlock_bh(dev); } Because of nv_disable_irq this is probably not really a problem though (I guess) and replacing the spin_lock with spin_lock_irqsave could keep interrupts disabled for a longer period of time because of delays in nv_stop_rx and nv_stop_tx. Signed-off-by: Tobias Diedrich Cc: Ayaz Abdulla Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 2cb2447..20d4fe9 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -4194,12 +4194,23 @@ static int nv_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd) netif_carrier_off(dev); if (netif_running(dev)) { + unsigned long flags; + nv_disable_irq(dev); netif_tx_lock_bh(dev); - spin_lock(&np->lock); + /* with plain spinlock lockdep complains */ + spin_lock_irqsave(&np->lock, flags); /* stop engines */ + /* FIXME: + * this can take some time, and interrupts are disabled + * due to spin_lock_irqsave, but let's hope no daemon + * is going to change the settings very often... + * Worst case: + * NV_RXSTOP_DELAY1MAX + NV_TXSTOP_DELAY1MAX + * + some minor delays, which is up to a second approximately + */ nv_stop_rxtx(dev); - spin_unlock(&np->lock); + spin_unlock_irqrestore(&np->lock, flags); netif_tx_unlock_bh(dev); } -- cgit v0.10.2 From 5c2cec143ac54c1960e54bc320fa7d13ac8e0f4a Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Thu, 3 Jul 2008 15:18:45 +0100 Subject: ehea: fix might sleep problem A mutex has to be replaced by spinlocks as it can be called from a context which does not allow sleeping. The kzalloc flag GFP_KERNEL has to be replaced by GFP_ATOMIC for the same reason. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index fe872fb..bf57e15 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -452,7 +452,7 @@ struct ehea_bcmc_reg_entry { struct ehea_bcmc_reg_array { struct ehea_bcmc_reg_entry *arr; int num_entries; - struct mutex lock; + spinlock_t lock; }; #define EHEA_PORT_UP 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 075fd54..489de9b 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -241,7 +241,7 @@ static void ehea_update_bcmc_registrations(void) } if (num_registrations) { - arr = kzalloc(num_registrations * sizeof(*arr), GFP_KERNEL); + arr = kzalloc(num_registrations * sizeof(*arr), GFP_ATOMIC); if (!arr) return; /* Keep the existing array */ } else @@ -301,7 +301,7 @@ static struct net_device_stats *ehea_get_stats(struct net_device *dev) memset(stats, 0, sizeof(*stats)); - cb2 = kzalloc(PAGE_SIZE, GFP_KERNEL); + cb2 = kzalloc(PAGE_SIZE, GFP_ATOMIC); if (!cb2) { ehea_error("no mem for cb2"); goto out; @@ -1763,7 +1763,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) memcpy(dev->dev_addr, mac_addr->sa_data, dev->addr_len); - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); /* Deregister old MAC in pHYP */ if (port->state == EHEA_PORT_UP) { @@ -1785,7 +1785,7 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) out_upregs: ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); out_free: kfree(cb0); out: @@ -1947,7 +1947,7 @@ static void ehea_set_multicast_list(struct net_device *dev) } ehea_promiscuous(dev, 0); - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); if (dev->flags & IFF_ALLMULTI) { ehea_allmulti(dev, 1); @@ -1978,7 +1978,7 @@ static void ehea_set_multicast_list(struct net_device *dev) } out: ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); return; } @@ -2497,7 +2497,7 @@ static int ehea_up(struct net_device *dev) } } - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); if (ret) { @@ -2520,7 +2520,7 @@ out: ehea_info("Failed starting %s. ret=%i", dev->name, ret); ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); ehea_update_firmware_handles(); mutex_unlock(&ehea_fw_handles.lock); @@ -2575,7 +2575,7 @@ static int ehea_down(struct net_device *dev) mutex_lock(&ehea_fw_handles.lock); - mutex_lock(&ehea_bcmc_regs.lock); + spin_lock(&ehea_bcmc_regs.lock); ehea_drop_multicast_list(dev); ehea_broadcast_reg_helper(port, H_DEREG_BCMC); @@ -2584,7 +2584,7 @@ static int ehea_down(struct net_device *dev) port->state = EHEA_PORT_DOWN; ehea_update_bcmc_registrations(); - mutex_unlock(&ehea_bcmc_regs.lock); + spin_unlock(&ehea_bcmc_regs.lock); ret = ehea_clean_all_portres(port); if (ret) @@ -3590,7 +3590,7 @@ int __init ehea_module_init(void) memset(&ehea_bcmc_regs, 0, sizeof(ehea_bcmc_regs)); mutex_init(&ehea_fw_handles.lock); - mutex_init(&ehea_bcmc_regs.lock); + spin_lock_init(&ehea_bcmc_regs.lock); ret = check_module_parm(); if (ret) -- cgit v0.10.2 From b0afffe89be619f42ae4215554ed66e67de7bb0e Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Thu, 3 Jul 2008 15:18:48 +0100 Subject: ehea: add MODULE_DEVICE_TABLE Required to allow distros to easily detect when ehea module needs to be loaded Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 489de9b..6ebcb22 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -118,6 +118,7 @@ static struct of_device_id ehea_device_table[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, ehea_device_table); static struct of_platform_driver ehea_driver = { .name = "ehea", -- cgit v0.10.2 From 2f69ae01c83a94af5dc3c20e8135b974687ed004 Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Thu, 3 Jul 2008 15:18:51 +0100 Subject: ehea: fix race condition When ehea_stop is called the function cancel_work_sync(&port->reset_task) is used to ensure that the reset task is not running anymore. We need an additional flag to ensure that it can not be scheduled after this call again for a certain time. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index bf57e15..e01926b 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0091" +#define DRV_VERSION "EHEA_0092" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 @@ -478,6 +478,7 @@ struct ehea_port { int num_add_tx_qps; int num_mcs; int resets; + u64 flags; u64 mac_addr; u32 logical_port_id; u32 port_speed; @@ -501,7 +502,8 @@ struct port_res_cfg { }; enum ehea_flag_bits { - __EHEA_STOP_XFER + __EHEA_STOP_XFER, + __EHEA_DISABLE_PORT_RESET }; void ehea_set_ethtool_ops(struct net_device *netdev); diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 6ebcb22..49ba6a9 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -138,6 +138,12 @@ void ehea_dump(void *adr, int len, char *msg) } } +void ehea_schedule_port_reset(struct ehea_port *port) +{ + if (!test_bit(__EHEA_DISABLE_PORT_RESET, &port->flags)) + schedule_work(&port->reset_task); +} + static void ehea_update_firmware_handles(void) { struct ehea_fw_handle_entry *arr = NULL; @@ -588,7 +594,7 @@ static int ehea_treat_poll_error(struct ehea_port_res *pr, int rq, "Resetting port.", pr->qp->init_attr.qp_nr); ehea_dump(cqe, sizeof(*cqe), "CQE"); } - schedule_work(&pr->port->reset_task); + ehea_schedule_port_reset(pr->port); return 1; } @@ -766,7 +772,7 @@ static struct ehea_cqe *ehea_proc_cqes(struct ehea_port_res *pr, int my_quota) ehea_error("Send Completion Error: Resetting port"); if (netif_msg_tx_err(pr->port)) ehea_dump(cqe, sizeof(*cqe), "Send CQE"); - schedule_work(&pr->port->reset_task); + ehea_schedule_port_reset(pr->port); break; } @@ -886,7 +892,7 @@ static irqreturn_t ehea_qp_aff_irq_handler(int irq, void *param) eqe = ehea_poll_eq(port->qp_eq); } - schedule_work(&port->reset_task); + ehea_schedule_port_reset(port); return IRQ_HANDLED; } @@ -2606,13 +2612,14 @@ static int ehea_stop(struct net_device *dev) if (netif_msg_ifdown(port)) ehea_info("disabling port %s", dev->name); + set_bit(__EHEA_DISABLE_PORT_RESET, &port->flags); cancel_work_sync(&port->reset_task); - mutex_lock(&port->port_lock); netif_stop_queue(dev); port_napi_disable(port); ret = ehea_down(dev); mutex_unlock(&port->port_lock); + clear_bit(__EHEA_DISABLE_PORT_RESET, &port->flags); return ret; } @@ -2942,7 +2949,7 @@ static void ehea_tx_watchdog(struct net_device *dev) if (netif_carrier_ok(dev) && !test_bit(__EHEA_STOP_XFER, &ehea_driver_flags)) - schedule_work(&port->reset_task); + ehea_schedule_port_reset(port); } int ehea_sense_adapter_attr(struct ehea_adapter *adapter) -- cgit v0.10.2 From 3ff2cd230de31e3b7bf2efd254e0393e5fc1d15d Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 1 Jul 2008 10:20:33 -0700 Subject: ehea: Access iph->tot_len with correct endianness iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on ehea, since ehea only exists for big-endian platfroms (at the moment at least) but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 49ba6a9..0920b79 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -623,7 +623,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr, *tcph = tcp_hdr(skb); /* check if ip header and tcp header are complete */ - if (iph->tot_len < ip_len + tcp_hdrlen(skb)) + if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb)) return -1; *hdr_flags = LRO_IPV4 | LRO_TCP; -- cgit v0.10.2 From 773212337941c5e26a05989532943877d72a2c83 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 1 Jul 2008 10:22:45 -0700 Subject: pasemi_mac: Access iph->tot_len with correct endianness iph->tot_len is stored in network byte order, so access it using ntohs(). This doesn't have any real world impact on pasemi_mac, since the device only exists as part of a big-endian system-on-chip, but fixing this gets rid of a sparse warning and avoids having a bad example in the tree. Signed-off-by: Roland Dreier Signed-off-by: Jeff Garzik diff --git a/drivers/net/pasemi_mac.c b/drivers/net/pasemi_mac.c index 3b2a6c5..993d87c 100644 --- a/drivers/net/pasemi_mac.c +++ b/drivers/net/pasemi_mac.c @@ -277,7 +277,7 @@ static int get_skb_hdr(struct sk_buff *skb, void **iphdr, *tcph = tcp_hdr(skb); /* check if ip header and tcp header are complete */ - if (iph->tot_len < ip_len + tcp_hdrlen(skb)) + if (ntohs(iph->tot_len) < ip_len + tcp_hdrlen(skb)) return -1; *hdr_flags = LRO_IPV4 | LRO_TCP; -- cgit v0.10.2 From ab9b30cc3ec868fab8764d710193107fbeedbd0f Mon Sep 17 00:00:00 2001 From: Sathya Narayanan Date: Tue, 1 Jul 2008 10:58:05 +0200 Subject: ibm_newemac: Fixes kernel crashes when speed of cable connected changes The descriptor pointers were not initialized to NIL values, so it was poiniting to some random addresses which was completely invalid. This fix takes care of initializing the descriptor to NIL values and clearing the valid descriptors on clean ring operation. Signed-off-by: Sathya Narayanan Signed-off-by: Stefan Roese Signed-off-by: Jeff Garzik diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 5d2108c..ca63fa0 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2719,6 +2719,8 @@ static int __devinit emac_probe(struct of_device *ofdev, /* Clean rings */ memset(dev->tx_desc, 0, NUM_TX_BUFF * sizeof(struct mal_descriptor)); memset(dev->rx_desc, 0, NUM_RX_BUFF * sizeof(struct mal_descriptor)); + memset(dev->tx_skb, 0, NUM_TX_BUFF * sizeof(struct sk_buff *)); + memset(dev->rx_skb, 0, NUM_RX_BUFF * sizeof(struct sk_buff *)); /* Attach to ZMII, if needed */ if (emac_has_feature(dev, EMAC_FTR_HAS_ZMII) && -- cgit v0.10.2 From 6c688f4294dec3f2228fd46be67604508177a1c3 Mon Sep 17 00:00:00 2001 From: Sathya Narayanan Date: Tue, 1 Jul 2008 10:58:19 +0200 Subject: ibm_newemac: Fixes entry of short packets Short packets has to be discarded by the driver. So this patch addresses the issue of discarding the short packets of size lesser then ethernet header size. Signed-off-by: Sathya Narayanan Signed-off-by: Stefan Roese Signed-off-by: Jeff Garzik diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index ca63fa0..babc79a 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -1636,6 +1636,12 @@ static int emac_poll_rx(void *param, int budget) goto next; } + if (len < ETH_HLEN) { + ++dev->estats.rx_dropped_stack; + emac_recycle_rx_skb(dev, slot, len); + goto next; + } + if (len && len < EMAC_RX_COPY_THRESH) { struct sk_buff *copy_skb = alloc_skb(len + EMAC_RX_SKB_HEADROOM + 2, GFP_ATOMIC); -- cgit v0.10.2 From c5a78ac00c400df29645e59938700301efb371d0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Thu, 26 Jun 2008 11:48:22 +0200 Subject: fs_enet: restore promiscuous and multicast settings in restart() The restart() function is called when the link state changes and resets multicast and promiscuous settings. This patch restores those settings at the end of restart(). Signed-off-by: Laurent Pinchart Signed-off-by: Jeff Garzik diff --git a/drivers/net/fs_enet/mac-fcc.c b/drivers/net/fs_enet/mac-fcc.c index e363211..8268b35 100644 --- a/drivers/net/fs_enet/mac-fcc.c +++ b/drivers/net/fs_enet/mac-fcc.c @@ -463,6 +463,9 @@ static void restart(struct net_device *dev) else C32(fccp, fcc_fpsmr, FCC_PSMR_FDE | FCC_PSMR_LPB); + /* Restore multicast and promiscuous settings */ + set_multicast_list(dev); + S32(fccp, fcc_gfmr, FCC_GFMR_ENR | FCC_GFMR_ENT); } -- cgit v0.10.2