From a94477da38e0b261a7ecea71f4c95a3bcd5be69c Mon Sep 17 00:00:00 2001 From: David Chinner Date: Wed, 30 Apr 2008 18:15:34 +1000 Subject: [XFS] Include linux/random.h in all builds, not just debug builds. SGI-PV: 979416 SGI-Modid: xfs-linux-melb:xfs-kern:31008a Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy diff --git a/fs/xfs/linux-2.6/xfs_linux.h b/fs/xfs/linux-2.6/xfs_linux.h index 1bc9f60..4edc469 100644 --- a/fs/xfs/linux-2.6/xfs_linux.h +++ b/fs/xfs/linux-2.6/xfs_linux.h @@ -75,6 +75,7 @@ #include #include #include +#include #include #include diff --git a/fs/xfs/support/debug.h b/fs/xfs/support/debug.h index 855da04..75845f9 100644 --- a/fs/xfs/support/debug.h +++ b/fs/xfs/support/debug.h @@ -49,8 +49,6 @@ extern void assfail(char *expr, char *f, int l); #else /* DEBUG */ -#include - #define ASSERT(expr) \ (unlikely(expr) ? (void)0 : assfail(#expr, __FILE__, __LINE__)) -- cgit v0.10.2 From 2f2fa13d5665d7d5f2ba6068dd28ca7796fa9ea8 Mon Sep 17 00:00:00 2001 From: Shyam Sundar Date: Mon, 12 May 2008 22:21:07 -0700 Subject: [SCSI] qla2xxx: Return correct port_type to FC-transport for Vports. For Vports, the port_type should be set to FC_PORTTYPE_NPIV. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 2876908..2caf841 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -886,9 +886,13 @@ qla2x00_get_host_speed(struct Scsi_Host *shost) static void qla2x00_get_host_port_type(struct Scsi_Host *shost) { - scsi_qla_host_t *ha = to_qla_parent(shost_priv(shost)); + scsi_qla_host_t *ha = shost_priv(shost); uint32_t port_type = FC_PORTTYPE_UNKNOWN; + if (ha->parent) { + fc_host_port_type(shost) = FC_PORTTYPE_NPIV; + return; + } switch (ha->current_topology) { case ISP_CFG_NL: port_type = FC_PORTTYPE_LPORT; -- cgit v0.10.2 From fd9a29f03600f306acb4faf49b92ca5472f39ee8 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:08 -0700 Subject: [SCSI] qla2xxx: Display driver version at module init-time. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 3223fd1..dd1e117 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2864,7 +2864,8 @@ qla2x00_module_init(void) return -ENODEV; } - printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n"); + printk(KERN_INFO "QLogic Fibre Channel HBA Driver: %s\n", + qla2x00_version_str); ret = pci_register_driver(&qla2xxx_pci_driver); if (ret) { kmem_cache_destroy(srb_cachep); -- cgit v0.10.2 From 0e973a24f02ed8c627271b013d69683b4497828d Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:09 -0700 Subject: [SCSI] qla2xxx: Correct locking within MSI-X interrupt handlers. Both MSI-X vector handlers attempt to acquire the HA's hardware_lock. This though requires that interrupts be disabled/enabled during acquisition and release of the spinlock. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 5d9a64a..0793aa9 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1639,12 +1639,12 @@ qla24xx_msix_rsp_q(int irq, void *dev_id) ha = dev_id; reg = &ha->iobase->isp24; - spin_lock(&ha->hardware_lock); + spin_lock_irq(&ha->hardware_lock); qla24xx_process_response_queue(ha); WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); - spin_unlock(&ha->hardware_lock); + spin_unlock_irq(&ha->hardware_lock); return IRQ_HANDLED; } @@ -1663,7 +1663,7 @@ qla24xx_msix_default(int irq, void *dev_id) reg = &ha->iobase->isp24; status = 0; - spin_lock(&ha->hardware_lock); + spin_lock_irq(&ha->hardware_lock); do { stat = RD_REG_DWORD(®->host_status); if (stat & HSRX_RISC_PAUSED) { @@ -1716,7 +1716,7 @@ qla24xx_msix_default(int irq, void *dev_id) } WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_INT); } while (0); - spin_unlock(&ha->hardware_lock); + spin_unlock_irq(&ha->hardware_lock); if (test_bit(MBX_INTR_WAIT, &ha->mbx_cmd_flags) && (status & MBX_INTERRUPT) && ha->flags.mbox_int) { -- cgit v0.10.2 From e1e82b6f0df0c5175ddd3d4f8862507aa71da8e9 Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Mon, 12 May 2008 22:21:10 -0700 Subject: [SCSI] qla2xxx: firmware semaphore to mutex Signed-off-by: Daniel Walker Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index dd1e117..9982ecd 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -10,6 +10,7 @@ #include #include #include +#include #include #include @@ -2634,7 +2635,7 @@ qla2x00_timer(scsi_qla_host_t *ha) #define FW_FILE_ISP24XX "ql2400_fw.bin" #define FW_FILE_ISP25XX "ql2500_fw.bin" -static DECLARE_MUTEX(qla_fw_lock); +static DEFINE_MUTEX(qla_fw_lock); static struct fw_blob qla_fw_blobs[FW_BLOBS] = { { .name = FW_FILE_ISP21XX, .segs = { 0x1000, 0 }, }, @@ -2665,7 +2666,7 @@ qla2x00_request_firmware(scsi_qla_host_t *ha) blob = &qla_fw_blobs[FW_ISP25XX]; } - down(&qla_fw_lock); + mutex_lock(&qla_fw_lock); if (blob->fw) goto out; @@ -2678,7 +2679,7 @@ qla2x00_request_firmware(scsi_qla_host_t *ha) } out: - up(&qla_fw_lock); + mutex_unlock(&qla_fw_lock); return blob; } @@ -2687,11 +2688,11 @@ qla2x00_release_firmware(void) { int idx; - down(&qla_fw_lock); + mutex_lock(&qla_fw_lock); for (idx = 0; idx < FW_BLOBS; idx++) if (qla_fw_blobs[idx].fw) release_firmware(qla_fw_blobs[idx].fw); - up(&qla_fw_lock); + mutex_unlock(&qla_fw_lock); } static pci_ers_result_t -- cgit v0.10.2 From 6c2f527cb84cbd7d2d8a668c979e70bf78980ccc Mon Sep 17 00:00:00 2001 From: "matthias@kaehlcke.net" Date: Mon, 12 May 2008 22:21:11 -0700 Subject: [SCSI] qla2xxx: Convert vport_sem to a mutex The semaphore vport_sem is used as a mutex. Convert it to the mutex API. Signed-off-by: Matthias Kaehlcke Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 2caf841..48318d0 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1176,10 +1176,10 @@ qla24xx_vport_delete(struct fc_vport *fc_vport) qla24xx_disable_vp(vha); qla24xx_deallocate_vp_id(vha); - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); ha->cur_vport_count--; clear_bit(vha->vp_idx, ha->vp_idx_map); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); kfree(vha->node_name); kfree(vha->port_name); diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index 299eccf..8dd60001 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2457,7 +2457,7 @@ typedef struct scsi_qla_host { #define MBX_INTR_WAIT 2 #define MBX_UPDATE_FLASH_ACTIVE 3 - struct semaphore vport_sem; /* Virtual port synchronization */ + struct mutex vport_lock; /* Virtual port synchronization */ struct completion mbx_cmd_comp; /* Serialize mbx access */ struct completion mbx_intr_comp; /* Used for completion notification */ diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 2100604..3800876 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2807,9 +2807,9 @@ qla24xx_control_vp(scsi_qla_host_t *vha, int cmd) */ map = (vp_index - 1) / 8; pos = (vp_index - 1) & 7; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vce->vp_idx_map[map] |= 1 << pos; - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); rval = qla2x00_issue_iocb(ha, vce, vce_dma, 0); if (rval != QLA_SUCCESS) { diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index f2b0497..fc55429 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -32,12 +32,12 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha) scsi_qla_host_t *ha = vha->parent; /* Find an empty slot and assign an vp_id */ - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vp_id = find_first_zero_bit(ha->vp_idx_map, ha->max_npiv_vports + 1); if (vp_id > ha->max_npiv_vports) { DEBUG15(printk ("vp_id %d is bigger than max-supported %d.\n", vp_id, ha->max_npiv_vports)); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vp_id; } @@ -45,7 +45,7 @@ qla24xx_allocate_vp_id(scsi_qla_host_t *vha) ha->num_vhosts++; vha->vp_idx = vp_id; list_add_tail(&vha->vp_list, &ha->vp_list); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vp_id; } @@ -55,12 +55,12 @@ qla24xx_deallocate_vp_id(scsi_qla_host_t *vha) uint16_t vp_id; scsi_qla_host_t *ha = vha->parent; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); vp_id = vha->vp_idx; ha->num_vhosts--; clear_bit(vp_id, ha->vp_idx_map); list_del(&vha->vp_list); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); } static scsi_qla_host_t * @@ -145,9 +145,9 @@ qla24xx_enable_vp(scsi_qla_host_t *vha) } /* Initialize the new vport unless it is a persistent port */ - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); ret = qla24xx_modify_vp_config(vha); - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); if (ret != QLA_SUCCESS) { fc_vport_set_state(vha->fc_vport, FC_VPORT_FAILED); @@ -437,10 +437,10 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) vha->flags.init_done = 1; num_hosts++; - down(&ha->vport_sem); + mutex_lock(&ha->vport_lock); set_bit(vha->vp_idx, ha->vp_idx_map); ha->cur_vport_count++; - up(&ha->vport_sem); + mutex_unlock(&ha->vport_lock); return vha; diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 9982ecd..817f62f 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -1632,7 +1632,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* load the F/W, read paramaters, and init the H/W */ ha->instance = num_hosts; - init_MUTEX(&ha->vport_sem); + mutex_init(&ha->vport_lock); init_completion(&ha->mbx_cmd_comp); complete(&ha->mbx_cmd_comp); init_completion(&ha->mbx_intr_comp); -- cgit v0.10.2 From fa0926df0f5cf63b998a79127519bdcfe9bf05f7 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:12 -0700 Subject: [SCSI] qla2xxx: Don't depend on mailbox return values while enabling FCE tracing. Recent firmwares no longer return the 'number of buffers' in mailbox6. The original code may result in a potential panic during a FW-dump process due to the driver misinterpreting the size of the allocated buffer. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index 3800876..bf3a6f0 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2508,7 +2508,7 @@ qla2x00_enable_fce_trace(scsi_qla_host_t *ha, dma_addr_t fce_dma, if (mb) memcpy(mb, mcp->mb, 8 * sizeof(*mb)); if (dwords) - *dwords = mcp->mb[6]; + *dwords = buffers; } return rval; -- cgit v0.10.2 From 68af081151670af4ca405823f9dfb74ec6b20e66 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:13 -0700 Subject: [SCSI] qla2xxx: Extend the 'fw_dump' SYSFS node the ability to initiate a firmware dump. The user-initiated dump can be a useful tool in triaging complex ISP and FC issues. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 48318d0..8dd88fc 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -70,6 +70,9 @@ qla2x00_sysfs_write_fw_dump(struct kobject *kobj, case 2: qla2x00_alloc_fw_dump(ha); break; + case 3: + qla2x00_system_error(ha); + break; } return (count); } diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index f882706..9b4bebe 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -228,6 +228,9 @@ extern int qla24xx_abort_target(struct fc_port *, unsigned int); extern int qla24xx_lun_reset(struct fc_port *, unsigned int); extern int +qla2x00_system_error(scsi_qla_host_t *); + +extern int qla2x00_set_serdes_params(scsi_qla_host_t *, uint16_t, uint16_t, uint16_t); extern int diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index bf3a6f0..250d2f6 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -2303,8 +2303,6 @@ qla24xx_lun_reset(struct fc_port *fcport, unsigned int l) return __qla24xx_issue_tmf("Lun", TCF_LUN_RESET, fcport, l); } -#if 0 - int qla2x00_system_error(scsi_qla_host_t *ha) { @@ -2312,7 +2310,7 @@ qla2x00_system_error(scsi_qla_host_t *ha) mbx_cmd_t mc; mbx_cmd_t *mcp = &mc; - if (!IS_FWI2_CAPABLE(ha)) + if (!IS_QLA23XX(ha) && !IS_FWI2_CAPABLE(ha)) return QLA_FUNCTION_FAILED; DEBUG11(printk("%s(%ld): entered.\n", __func__, ha->host_no)); @@ -2334,8 +2332,6 @@ qla2x00_system_error(scsi_qla_host_t *ha) return rval; } -#endif /* 0 */ - /** * qla2x00_set_serdes_params() - * @ha: HA context -- cgit v0.10.2 From d2ba5675d8993e669182250e41ad83e7a0b5d4ad Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:14 -0700 Subject: [SCSI] qla2xxx: Disable local-interrupts while polling for RISC status. Matthew Wilcox reported the following lockdep warning: > ================================= > [INFO:inconsistentlockstate] > 2.6.26-rc1-00115-g0340eda-dirty#60 > --------------------------------- > inconsistent{hardirq-on-W}->{in-hardirq-W}usage. > swapper/1[HC1[1]:SC0[0]:HE0:SE1]takes: > (&ha->hardware_lock){+-..},at:[]qla2300_intr_handler+0x35/0x1f5 > {hardirq-on-W}statewasregisteredat: > []__lock_acquire+0x459/0xb1d > []__lock_acquire+0xad4/0xb1d > []lock_acquire+0x68/0x82 > []qla2300_intr_handler+0x35/0x1f5 > []_spin_lock+0x24/0x4d > []qla2300_intr_handler+0x35/0x1f5 > []qla2300_intr_handler+0x35/0x1f5 > []trace_hardirqs_on+0xe7/0x10e > []qla2x00_mailbox_command+0x1c6/0x433 ... > other info that might help us debug this: > no locks held by swapper/1. > > stack backtrace: > Pid:1,comm:swapperNottainted2.6.26-rc1-00115-g0340eda-dirty#60 > []print_usage_bug+0x100/0x10a > []mark_lock+0xaa/0x395 > []__lock_acquire+0x3f2/0xb1d > []__lock_acquire+0xad4/0xb1d > []lock_acquire+0x68/0x82 > []qla2300_intr_handler+0x35/0x1f5 > []_spin_lock+0x24/0x4d > []qla2300_intr_handler+0x35/0x1f5 > []qla2300_intr_handler+0x35/0x1f5 > []handle_IRQ_event+0x13/0x3d > []handle_fasteoi_irq+0x76/0xab Which shows that lockdep is detecting the driver's interrupt-handler is run in both process and interrupt context with irqs-enabled in the former case. During init-time and error-recovery (after a RISC reset), the driver disables interrupts and 'polls' for completions by calling qla2x00_poll(): static inline void qla2x00_poll(scsi_qla_host_t *ha) { ha->isp_ops->intr_handler(0, ha); } which in-turn calls the ISP registered interrupt handler. This patch corrects it by disabling local interrupts during polling. Reviewed-by: Matthew Wilcox Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index e9bae27..92fafbd 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -34,7 +34,11 @@ qla2x00_debounce_register(volatile uint16_t __iomem *addr) static inline void qla2x00_poll(scsi_qla_host_t *ha) { + unsigned long flags; + + local_irq_save(flags); ha->isp_ops->intr_handler(0, ha); + local_irq_restore(flags); } static __inline__ scsi_qla_host_t * -- cgit v0.10.2 From a7cd02320eeee9992c7eba347555e8970042b68c Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:15 -0700 Subject: [SCSI] qla2xxx: Revert "qla2xxx: Validate mid-layer 'underflow' during check-condition handling." This reverts commit 8084fe168a5252548cdddf2ed181c337fecd0523. The midlayer should be given the oppotunity to interpret the check-condition and based on scsi_cmnd->resid determine if a transfer should be retried or failed. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 0793aa9..14bcd7c 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1132,25 +1132,6 @@ qla2x00_status_entry(scsi_qla_host_t *ha, void *pkt) break; qla2x00_handle_sense(sp, sense_data, sense_len); - - /* - * In case of a Underrun condition, set both the lscsi - * status and the completion status to appropriate - * values. - */ - if (resid && - ((unsigned)(scsi_bufflen(cp) - resid) < - cp->underflow)) { - DEBUG2(qla_printk(KERN_INFO, ha, - "scsi(%ld:%d:%d:%d): Mid-layer underflow " - "detected (%x of %x bytes)...returning " - "error status.\n", ha->host_no, - cp->device->channel, cp->device->id, - cp->device->lun, resid, - scsi_bufflen(cp))); - - cp->result = DID_ERROR << 16 | lscsi_status; - } } else { /* * If RISC reports underrun and target does not report -- cgit v0.10.2 From 7853099a70742b2a3c753282e5ccfbdda86cb29f Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 12 May 2008 22:21:16 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k3. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index afeae2b..b42e3f2 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k2" +#define QLA2XXX_VERSION "8.02.01-k3" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v0.10.2 From cd80ec6f81db89d109187a673470c04af4c09a63 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 15 May 2008 15:28:55 -0700 Subject: IB/ipath: Fix printk format for ipath_sdma_status Commit f018c7e1 ("IB/ipath: Change ipath_devdata.ipath_sdma_status to be unsigned long") changed ipath_sdma_status to be unsigned long, but left a few debug messages that printed it out with a %016llx format, which generates the warnings drivers/infiniband/hw/ipath/ipath_sdma.c:348: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' drivers/infiniband/hw/ipath/ipath_sdma.c:618: warning: format '%016llx' expects type 'long long unsigned int', but argument 3 has type 'long unsigned int' Fix this by changing the format used to print out the value to %08lx (8 hex digits are now sufficient, because the highest bit used is 31). Warnings reported by Randy Dunlap . Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c index 3697449..0a8c1b8 100644 --- a/drivers/infiniband/hw/ipath/ipath_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_sdma.c @@ -345,7 +345,7 @@ resched: * state change */ if (jiffies > dd->ipath_sdma_abort_jiffies) { - ipath_dbg("looping with status 0x%016llx\n", + ipath_dbg("looping with status 0x%08lx\n", dd->ipath_sdma_status); dd->ipath_sdma_abort_jiffies = jiffies + 5 * HZ; } @@ -615,7 +615,7 @@ void ipath_restart_sdma(struct ipath_devdata *dd) } spin_unlock_irqrestore(&dd->ipath_sdma_lock, flags); if (!needed) { - ipath_dbg("invalid attempt to restart SDMA, status 0x%016llx\n", + ipath_dbg("invalid attempt to restart SDMA, status 0x%08lx\n", dd->ipath_sdma_status); goto bail; } -- cgit v0.10.2 From df3f0da8db6b5e7e8f0585221c8b1cd8ff806d35 Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Thu, 15 May 2008 16:37:25 -0700 Subject: IB/ipath: Fix UC receive completion opcode for RDMA WRITE with immediate When I fixed the RC receive completion opcode in 2bfc8e9e ("IB/ipath: Return the correct opcode for RDMA WRITE with immediate"), I forgot to fix UC, which had the same problem for RDMA write with immediate returning the wrong opcode. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_uc.c b/drivers/infiniband/hw/ipath/ipath_uc.c index 7fd18e8..0596ec1 100644 --- a/drivers/infiniband/hw/ipath/ipath_uc.c +++ b/drivers/infiniband/hw/ipath/ipath_uc.c @@ -407,12 +407,11 @@ void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, dev->n_pkt_drops++; goto done; } - /* XXX Need to free SGEs */ + wc.opcode = IB_WC_RECV; last_imm: ipath_copy_sge(&qp->r_sge, data, tlen); wc.wr_id = qp->r_wr_id; wc.status = IB_WC_SUCCESS; - wc.opcode = IB_WC_RECV; wc.qp = &qp->ibqp; wc.src_qp = qp->remote_qpn; wc.slid = qp->remote_ah_attr.dlid; @@ -514,6 +513,7 @@ void ipath_uc_rcv(struct ipath_ibdev *dev, struct ipath_ib_header *hdr, goto done; } wc.byte_len = qp->r_len; + wc.opcode = IB_WC_RECV_RDMA_WITH_IMM; goto last_imm; case OP(RDMA_WRITE_LAST): -- cgit v0.10.2 From a3d8e1591dc90d359d444c759dfda2c6fc605251 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Fri, 16 May 2008 14:28:30 -0700 Subject: IB/mlx4: Fix uninitialized-var warning in mlx4_ib_post_send() drivers/infiniband/hw/mlx4/qp.c: In function 'mlx4_ib_post_send': drivers/infiniband/hw/mlx4/qp.c:1460: warning: 'seglen' may be used uninitialized in this function This is the dopey gcc-doesn't-know-that-foo(&var)-writes-to-var problem. Signed-off-by: Andrew Morton Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index 8e02ecf..cec030e 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -1457,7 +1457,7 @@ int mlx4_ib_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, unsigned ind; int uninitialized_var(stamp); int uninitialized_var(size); - unsigned seglen; + unsigned uninitialized_var(seglen); int i; spin_lock_irqsave(&qp->sq.lock, flags); -- cgit v0.10.2 From 21609ae3efa42f4118ce741f7e55d66d716cb17c Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 May 2008 14:58:40 -0700 Subject: RDMA/cxgb3: Fix uninitialized variable warning in iwch_post_send() drivers/infiniband/hw/cxgb3/iwch_qp.c: In function 'iwch_post_send': drivers/infiniband/hw/cxgb3/iwch_qp.c:232: warning: 't3_wr_flit_cnt' may be used uninitialized in this function This is what akpm describes as "the dopey gcc-doesn't-know-that-foo(&var)-writes-to-var problem." Signed-off-by: Roland Dreier Acked-by: Steve Wise diff --git a/drivers/infiniband/hw/cxgb3/iwch_qp.c b/drivers/infiniband/hw/cxgb3/iwch_qp.c index 79dbe5b..9926137 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_qp.c +++ b/drivers/infiniband/hw/cxgb3/iwch_qp.c @@ -229,7 +229,7 @@ int iwch_post_send(struct ib_qp *ibqp, struct ib_send_wr *wr, struct ib_send_wr **bad_wr) { int err = 0; - u8 t3_wr_flit_cnt; + u8 uninitialized_var(t3_wr_flit_cnt); enum t3_wr_opcode t3_wr_opcode = 0; enum t3_wr_flags t3_wr_flags; struct iwch_qp *qhp; -- cgit v0.10.2 From 12103dca52e79e23afe2fbcaf3d9e7fc9ceb6b18 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 May 2008 14:58:44 -0700 Subject: IB/mthca: Fix max_sge value returned by query_device The mthca driver returns the maximum number of scatter/gather entries returned by the firmware as the max_sge value when device properties are queried. However, the firmware also reports a limit on the maximum descriptor size allowed, and because mthca takes into account the worst case send request overhead when checking whether to allow a QP to be created, the largest number of scatter/gather entries that can be used with mthca may be limited by the maximum descriptor size rather than just by the actual s/g entry limit. This means that applications cannot actually create QPs with max_send_sge equal to the limit returned by ib_query_device(). Fix this by checking if the maximum descriptor size imposes a lower limit and if so returning that lower limit. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index 9ebadd6..200cf13 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -45,6 +45,7 @@ #include "mthca_cmd.h" #include "mthca_profile.h" #include "mthca_memfree.h" +#include "mthca_wqe.h" MODULE_AUTHOR("Roland Dreier"); MODULE_DESCRIPTION("Mellanox InfiniBand HCA low-level driver"); @@ -200,7 +201,18 @@ static int mthca_dev_lim(struct mthca_dev *mdev, struct mthca_dev_lim *dev_lim) mdev->limits.gid_table_len = dev_lim->max_gids; mdev->limits.pkey_table_len = dev_lim->max_pkeys; mdev->limits.local_ca_ack_delay = dev_lim->local_ca_ack_delay; - mdev->limits.max_sg = dev_lim->max_sg; + /* + * Need to allow for worst case send WQE overhead and check + * whether max_desc_sz imposes a lower limit than max_sg; UD + * send has the biggest overhead. + */ + mdev->limits.max_sg = min_t(int, dev_lim->max_sg, + (dev_lim->max_desc_sz - + sizeof (struct mthca_next_seg) - + (mthca_is_memfree(mdev) ? + sizeof (struct mthca_arbel_ud_seg) : + sizeof (struct mthca_tavor_ud_seg))) / + sizeof (struct mthca_data_seg)); mdev->limits.max_wqes = dev_lim->max_qp_sz; mdev->limits.max_qp_init_rdma = dev_lim->max_requester_per_qp; mdev->limits.reserved_qps = dev_lim->reserved_qps; -- cgit v0.10.2 From 239f49c0800778c863585a103805c58afbad6748 Mon Sep 17 00:00:00 2001 From: MinChan Kim Date: Mon, 19 May 2008 22:12:08 +0900 Subject: slob: Fix to return wrong pointer Although slob_alloc return NULL, __kmalloc_node returns NULL + align. Because align always can be changed, it is very hard for debugging problem of no page if it don't return NULL. We have to return NULL in case of no page. [penberg@cs.helsinki.fi: fix formatting as suggested by Matt.] Acked-by: Matt Mackall Signed-off-by: MinChan Kim Signed-off-by: Pekka Enberg diff --git a/mm/slob.c b/mm/slob.c index 6038cba..a3ad667 100644 --- a/mm/slob.c +++ b/mm/slob.c @@ -469,8 +469,9 @@ void *__kmalloc_node(size_t size, gfp_t gfp, int node) return ZERO_SIZE_PTR; m = slob_alloc(size + align, gfp, align, node); - if (m) - *m = size; + if (!m) + return NULL; + *m = size; return (void *)m + align; } else { void *ret; -- cgit v0.10.2 From eba9fe93a2959ec7f195c47c9db6ce7b5114ce1f Mon Sep 17 00:00:00 2001 From: Mark Langsdorf Date: Tue, 18 Mar 2008 15:24:32 -0500 Subject: [CPUFREQ] powernow-k8: improve error messages The most common error with powernow-k8 is an ACPI _PSS error caused either by failure to load the ACPI processor module or a bad parse of the _PSS object. Make the error message returned to the user in these situations more straightforward and easier to understand. -Mark Langsdorf Operating System Research Center AMD Signed-off-by: Mark Langsdorf Signed-off-by: Andreas Herrmann Signed-off-by: Dave Jones diff --git a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c index 46d4034..206791e 100644 --- a/arch/x86/kernel/cpu/cpufreq/powernow-k8.c +++ b/arch/x86/kernel/cpu/cpufreq/powernow-k8.c @@ -1127,12 +1127,23 @@ static int __cpuinit powernowk8_cpu_init(struct cpufreq_policy *pol) * an UP version, and is deprecated by AMD. */ if (num_online_cpus() != 1) { - printk(KERN_ERR PFX "MP systems not supported by PSB BIOS structure\n"); +#ifndef CONFIG_ACPI_PROCESSOR + printk(KERN_ERR PFX "ACPI Processor support is required " + "for SMP systems but is absent. Please load the " + "ACPI Processor module before starting this " + "driver.\n"); +#else + printk(KERN_ERR PFX "Your BIOS does not provide ACPI " + "_PSS objects in a way that Linux understands. " + "Please report this to the Linux ACPI maintainers" + " and complain to your BIOS vendor.\n"); +#endif kfree(data); return -ENODEV; } if (pol->cpu != 0) { - printk(KERN_ERR PFX "No _PSS objects for CPU other than CPU0\n"); + printk(KERN_ERR PFX "No ACPI _PSS objects for CPU other than " + "CPU0. Complain to your BIOS vendor.\n"); kfree(data); return -ENODEV; } -- cgit v0.10.2 From 667ad4f70110357e8f024e81741c7bd1d7906e7d Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Thu, 8 May 2008 22:10:01 +0200 Subject: [CPUFREQ] Crusoe: longrun cpufreq module reports false min freq The longrun cpufreq module reports a false minimum frequency 3MHz on 300-600MHz Crusoe processor. This may be due to a calculation bug in the module. Original patch from Kaz Sasayama submitted as http://bugs.debian.org/468149 patch ported to x86 Cc: Kaz Sasayama Signed-off-by: maximilian attems Signed-off-by: Dave Jones diff --git a/arch/x86/kernel/cpu/cpufreq/longrun.c b/arch/x86/kernel/cpu/cpufreq/longrun.c index af4a867..777a7ff 100644 --- a/arch/x86/kernel/cpu/cpufreq/longrun.c +++ b/arch/x86/kernel/cpu/cpufreq/longrun.c @@ -245,7 +245,7 @@ static unsigned int __init longrun_determine_freqs(unsigned int *low_freq, if ((ecx > 95) || (ecx == 0) || (eax < ebx)) return -EIO; - edx = (eax - ebx) / (100 - ecx); + edx = ((eax - ebx) * 100) / (100 - ecx); *low_freq = edx * 1000; /* back to kHz */ dprintk("low frequency is %u kHz\n", *low_freq); -- cgit v0.10.2 From f086f23435bf42f700296f1be3878f6aa6e9b7dd Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Tue, 20 May 2008 16:42:39 +0800 Subject: Blackfin arch: Cleanup no functional changes Singed-off-by: Michael Hennerich Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/gptimers.c b/arch/blackfin/kernel/gptimers.c index e698554..3a3e961 100644 --- a/arch/blackfin/kernel/gptimers.c +++ b/arch/blackfin/kernel/gptimers.c @@ -10,8 +10,8 @@ #include #include +#include -#include #include #include diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 3b74f96..4f4ae87 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -684,7 +684,7 @@ static struct platform_device *cm_bf548_devices[] __initdata = { static int __init cm_bf548_init(void) { - printk(KERN_INFO "%s(): registering device resources\n", __FUNCTION__); + printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(cm_bf548_devices, ARRAY_SIZE(cm_bf548_devices)); #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -- cgit v0.10.2 From ca56d9aaf2a135e0eb528df427f7dda15d077b11 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Tue, 20 May 2008 16:45:29 +0800 Subject: Blackfin arch: Fix typo. it should be _outsw_8 Signed-off-by: Bryan Wu diff --git a/arch/blackfin/lib/outs.S b/arch/blackfin/lib/outs.S index 3daf960..4685b7a 100644 --- a/arch/blackfin/lib/outs.S +++ b/arch/blackfin/lib/outs.S @@ -76,4 +76,4 @@ ENTRY(_outsw_8) R0 = R0 + R1; .Lword8_loop_e: W[P0] = R0; RTS; -ENDPROC(_outsw) +ENDPROC(_outsw_8) -- cgit v0.10.2 From 65e660aa3f76b120c2fe69bf07e1b416dae404a7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 20 May 2008 13:47:28 -0400 Subject: Input: i8042 - add Dritek quirk for Acer TravelMate 660 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Acer TravelMate 660 series also requires the Dritek quirk to enable the extra scancodes. Signed-off-by: Bruno PrĂ©mont Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 5ece9f5..9aafa96 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -331,6 +331,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { }, }, { + .ident = "Acer TravelMate 660", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 660"), + }, + }, + { .ident = "Acer TravelMate 2490", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "Acer"), -- cgit v0.10.2 From cd155c1c7c9e64df6afb5504d292fef7cb783a4f Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 20 May 2008 14:00:02 -0700 Subject: IB/mlx4: Fix creation of kernel QP with max number of send s/g entries When creating a kernel QP where the consumer asked for a send queue with lots of scatter/gater entries, set_kernel_sq_size() incorrectly returned an error if the send queue stride is larger than the hardware's maximum send work request descriptor size. This is not a problem; the only issue is to make sure that the actual descriptors used do not overflow the maximum descriptor size, so check this instead. Clamp the returned max_send_sge value to be no bigger than what query_device returns for the max_sge to avoid confusing hapless users, even if the hardware is capable of handling a few more s/g entries. This bug caused NFS/RDMA mounts to fail when the server adapter used the mlx4 driver. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c index cec030e..a80df22 100644 --- a/drivers/infiniband/hw/mlx4/qp.c +++ b/drivers/infiniband/hw/mlx4/qp.c @@ -333,6 +333,9 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, cap->max_inline_data + sizeof (struct mlx4_wqe_inline_seg)) + send_wqe_overhead(type, qp->flags); + if (s > dev->dev->caps.max_sq_desc_sz) + return -EINVAL; + /* * Hermon supports shrinking WQEs, such that a single work * request can include multiple units of 1 << wqe_shift. This @@ -372,9 +375,6 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, qp->sq.wqe_shift = ilog2(roundup_pow_of_two(s)); for (;;) { - if (1 << qp->sq.wqe_shift > dev->dev->caps.max_sq_desc_sz) - return -EINVAL; - qp->sq_max_wqes_per_wr = DIV_ROUND_UP(s, 1U << qp->sq.wqe_shift); /* @@ -395,7 +395,8 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, ++qp->sq.wqe_shift; } - qp->sq.max_gs = ((qp->sq_max_wqes_per_wr << qp->sq.wqe_shift) - + qp->sq.max_gs = (min(dev->dev->caps.max_sq_desc_sz, + (qp->sq_max_wqes_per_wr << qp->sq.wqe_shift)) - send_wqe_overhead(type, qp->flags)) / sizeof (struct mlx4_wqe_data_seg); @@ -411,7 +412,9 @@ static int set_kernel_sq_size(struct mlx4_ib_dev *dev, struct ib_qp_cap *cap, cap->max_send_wr = qp->sq.max_post = (qp->sq.wqe_cnt - qp->sq_spare_wqes) / qp->sq_max_wqes_per_wr; - cap->max_send_sge = qp->sq.max_gs; + cap->max_send_sge = min(qp->sq.max_gs, + min(dev->dev->caps.max_sq_sg, + dev->dev->caps.max_rq_sg)); /* We don't support inline sends for kernel QPs (yet) */ cap->max_inline_data = 0; -- cgit v0.10.2 From e5ec3789c16e12a1936a3be7bdda51897a4148b8 Mon Sep 17 00:00:00 2001 From: Steve Wise Date: Tue, 20 May 2008 14:06:33 -0700 Subject: MAINTAINERS: Add cxgb3 and iw_cxgb3 NIC and iWARP driver entries Signed-off-by: Steve Wise Signed-off-by: Roland Dreier diff --git a/MAINTAINERS b/MAINTAINERS index bc1c008..907d8c4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1239,6 +1239,20 @@ L: video4linux-list@redhat.com W: http://linuxtv.org S: Maintained +CXGB3 ETHERNET DRIVER (CXGB3) +P: Divy Le Ray +M: divy@chelsio.com +L: netdev@vger.kernel.org +W: http://www.chelsio.com +S: Supported + +CXGB3 IWARP RNIC DRIVER (IW_CXGB3) +P: Steve Wise +M: swise@chelsio.com +L: general@lists.openfabrics.org +W: http://www.openfabrics.org +S: Supported + CYBERPRO FB DRIVER P: Russell King M: rmk@arm.linux.org.uk -- cgit v0.10.2 From e1d50dce5af77cb6d33555af70e2b8748dd84009 Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Tue, 20 May 2008 15:41:09 -0700 Subject: IPoIB: Test for NULL broadcast object in ipiob_mcast_join_finish() We saw a kernel oops in our regression testing when a multicast "join finish" occurred just after the interface was -- this is . The test randomly causes the HCA physical port to go down then up. The cause of this is that ipoib_mcast_join_finish() processing happen just after ipoib_mcast_dev_flush() was invoked (in which case the broadcast pointer is NULL). This patch tests for and handles the case where priv->broadcast is NULL. Cc: Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c index d00a2c1..3f663fb 100644 --- a/drivers/infiniband/ulp/ipoib/ipoib_multicast.c +++ b/drivers/infiniband/ulp/ipoib/ipoib_multicast.c @@ -194,7 +194,13 @@ static int ipoib_mcast_join_finish(struct ipoib_mcast *mcast, /* Set the cached Q_Key before we attach if it's the broadcast group */ if (!memcmp(mcast->mcmember.mgid.raw, priv->dev->broadcast + 4, sizeof (union ib_gid))) { + spin_lock_irq(&priv->lock); + if (!priv->broadcast) { + spin_unlock_irq(&priv->lock); + return -EAGAIN; + } priv->qkey = be32_to_cpu(priv->broadcast->mcmember.qkey); + spin_unlock_irq(&priv->lock); priv->tx_wr.wr.ud.remote_qkey = priv->qkey; } -- cgit v0.10.2 From da8395be0bb04f685d55f124d046766d9209214a Mon Sep 17 00:00:00 2001 From: Dave Jones Date: Tue, 20 May 2008 22:13:09 -0400 Subject: [CPUFREQ] Remove documentation of removed ondemand tunable. sampling_down_factor was removed in ccb2fe209dac9ff67f6351e783e610073afaaeaf back in June 2006. Signed-off-by: Dave Jones diff --git a/Documentation/cpu-freq/governors.txt b/Documentation/cpu-freq/governors.txt index 6a9c55b..dcec056 100644 --- a/Documentation/cpu-freq/governors.txt +++ b/Documentation/cpu-freq/governors.txt @@ -129,14 +129,6 @@ to its default value of '80' it means that between the checking intervals the CPU needs to be on average more than 80% in use to then decide that the CPU frequency needs to be increased. -sampling_down_factor: this parameter controls the rate that the CPU -makes a decision on when to decrease the frequency. When set to its -default value of '5' it means that at 1/5 the sampling_rate the kernel -makes a decision to lower the frequency. Five "lower rate" decisions -have to be made in a row before the CPU frequency is actually lower. -If set to '1' then the frequency decreases as quickly as it increases, -if set to '2' it decreases at half the rate of the increase. - ignore_nice_load: this parameter takes a value of '0' or '1'. When set to '0' (its default), all processes are counted towards the 'cpu utilisation' value. When set to '1', the processes that are -- cgit v0.10.2 From ddc9753fcddfe5f9885dc133824962c047252b43 Mon Sep 17 00:00:00 2001 From: Shaohua Li Date: Wed, 21 May 2008 16:58:40 +0800 Subject: PCI: don't enable ASPM on devices with mixed PCIe/PCI functions The Slot 03:00.* of JMicron controller has two functions, but one is PCIE endpoint the other isn't PCIE device, very strange. PCIE spec defines all functions should have the same config for ASPM, so disable ASPM for the whole slot in this case. Signed-off-by: Shaohua Li Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pcie/aspm.c b/drivers/pci/pcie/aspm.c index 61fedb2..f824955 100644 --- a/drivers/pci/pcie/aspm.c +++ b/drivers/pci/pcie/aspm.c @@ -506,6 +506,23 @@ static void free_link_state(struct pci_dev *pdev) pdev->link_state = NULL; } +static int pcie_aspm_sanity_check(struct pci_dev *pdev) +{ + struct pci_dev *child_dev; + int child_pos; + + /* + * Some functions in a slot might not all be PCIE functions, very + * strange. Disable ASPM for the whole slot + */ + list_for_each_entry(child_dev, &pdev->subordinate->devices, bus_list) { + child_pos = pci_find_capability(child_dev, PCI_CAP_ID_EXP); + if (!child_pos) + return -EINVAL; + } + return 0; +} + /* * pcie_aspm_init_link_state: Initiate PCI express link state. * It is called after the pcie and its children devices are scaned. @@ -526,6 +543,9 @@ void pcie_aspm_init_link_state(struct pci_dev *pdev) if (list_empty(&pdev->subordinate->devices)) goto out; + if (pcie_aspm_sanity_check(pdev)) + goto out; + mutex_lock(&aspm_lock); link_state = kzalloc(sizeof(*link_state), GFP_KERNEL); -- cgit v0.10.2 From 4cc58bdebfcb7561de401999705a5cde16674842 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:13:57 +0100 Subject: sfc: Use mod_timer() to set expiry and add_timer() together Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/boards.c b/drivers/net/sfc/boards.c index eecaa6d..7fc0328 100644 --- a/drivers/net/sfc/boards.c +++ b/drivers/net/sfc/boards.c @@ -27,10 +27,8 @@ static void blink_led_timer(unsigned long context) struct efx_blinker *bl = &efx->board_info.blinker; efx->board_info.set_fault_led(efx, bl->state); bl->state = !bl->state; - if (bl->resubmit) { - bl->timer.expires = jiffies + BLINK_INTERVAL; - add_timer(&bl->timer); - } + if (bl->resubmit) + mod_timer(&bl->timer, jiffies + BLINK_INTERVAL); } static void board_blink(struct efx_nic *efx, int blink) @@ -44,8 +42,7 @@ static void board_blink(struct efx_nic *efx, int blink) blinker->state = 0; setup_timer(&blinker->timer, blink_led_timer, (unsigned long)efx); - blinker->timer.expires = jiffies + BLINK_INTERVAL; - add_timer(&blinker->timer); + mod_timer(&blinker->timer, jiffies + BLINK_INTERVAL); } else { blinker->resubmit = 0; if (blinker->timer.function) -- cgit v0.10.2 From 91ad757c2fc35ec79dd2c909dc6dc721b9c257f3 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:14:27 +0100 Subject: sfc: Removed casts to void Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 418f2e5..48aae47 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -265,7 +265,7 @@ void efx_process_channel_now(struct efx_channel *channel) napi_disable(&channel->napi_str); /* Poll the channel */ - (void) efx_process_channel(channel, efx->type->evq_size); + efx_process_channel(channel, efx->type->evq_size); /* Ack the eventq. This may cause an interrupt to be generated * when they are reenabled */ @@ -1688,7 +1688,7 @@ static int efx_reset(struct efx_nic *efx) if (method == RESET_TYPE_DISABLE) { /* Reinitialise the device anyway so the driver unload sequence * can talk to the external SRAM */ - (void) falcon_init_nic(efx); + falcon_init_nic(efx); rc = -EIO; goto fail4; } diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index b57cc68..c58f8a3 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -2647,7 +2647,7 @@ void falcon_remove_nic(struct efx_nic *efx) falcon_free_buffer(efx, &efx->irq_status); - (void) falcon_reset_hw(efx, RESET_TYPE_ALL); + falcon_reset_hw(efx, RESET_TYPE_ALL); /* Release the second function after the reset */ if (nic_data->pci_dev2) { diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index a74b793..d2978d4 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -454,7 +454,7 @@ static int falcon_check_xaui_link_up(struct efx_nic *efx) EFX_LOG(efx, "%s Clobbering XAUI (%d tries left).\n", __func__, tries); - (void) falcon_reset_xaui(efx); + falcon_reset_xaui(efx); udelay(200); tries--; } @@ -572,7 +572,7 @@ int falcon_check_xmac(struct efx_nic *efx) xaui_link_ok = falcon_xaui_link_ok(efx); if (EFX_WORKAROUND_5147(efx) && !xaui_link_ok) - (void) falcon_reset_xaui(efx); + falcon_reset_xaui(efx); /* Call the PHY check_hw routine */ rc = efx->phy_op->check_hw(efx); diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c index 725d1a5..66a0d14 100644 --- a/drivers/net/sfc/sfe4001.c +++ b/drivers/net/sfc/sfe4001.c @@ -116,18 +116,18 @@ void sfe4001_poweroff(struct efx_nic *efx) /* Turn off all power rails */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); /* Disable port 1 outputs on IO expander */ cfg = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); + efx_i2c_write(i2c, PCA9539, P1_CONFIG, &cfg, 1); /* Disable port 0 outputs on IO expander */ cfg = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); + efx_i2c_write(i2c, PCA9539, P0_CONFIG, &cfg, 1); /* Clear any over-temperature alert */ - (void) efx_i2c_read(i2c, MAX6647, RSL, &in, 1); + efx_i2c_read(i2c, MAX6647, RSL, &in, 1); } /* The P0_EN_3V3X line on SFE4001 boards (from A2 onward) is connected @@ -253,14 +253,14 @@ done: fail3: /* Turn off all power rails */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_OUT, &out, 1); /* Disable port 1 outputs on IO expander */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); + efx_i2c_write(i2c, PCA9539, P1_CONFIG, &out, 1); fail2: /* Disable port 0 outputs on IO expander */ out = 0xff; - (void) efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); + efx_i2c_write(i2c, PCA9539, P0_CONFIG, &out, 1); fail1: return rc; } diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index b1cd6de..38e96ed 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -376,7 +376,7 @@ static void tenxpress_phy_reconfigure(struct efx_nic *efx) * perform a special software reset */ if ((phy_data->tx_disabled && !efx->tx_disabled) || loop_change) { - (void) tenxpress_special_reset(efx); + tenxpress_special_reset(efx); falcon_reset_xaui(efx); } -- cgit v0.10.2 From f7f13b0b9253e21557ad090144a44f20860332f1 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:15:06 +0100 Subject: sfc: Simplified efx_rx_calc_buffer_size() using get_order() Merged it into its only caller, efx_init_channels(). Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 48aae47..1a065fc 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -317,26 +317,6 @@ static void efx_remove_eventq(struct efx_channel *channel) * *************************************************************************/ -/* Setup per-NIC RX buffer parameters. - * Calculate the rx buffer allocation parameters required to support - * the current MTU, including padding for header alignment and overruns. - */ -static void efx_calc_rx_buffer_params(struct efx_nic *efx) -{ - unsigned int order, len; - - len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) + - EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + - efx->type->rx_buffer_padding); - - /* Calculate page-order */ - for (order = 0; ((1u << order) * PAGE_SIZE) < len; ++order) - ; - - efx->rx_buffer_len = len; - efx->rx_buffer_order = order; -} - static int efx_probe_channel(struct efx_channel *channel) { struct efx_tx_queue *tx_queue; @@ -387,7 +367,14 @@ static int efx_init_channels(struct efx_nic *efx) struct efx_channel *channel; int rc = 0; - efx_calc_rx_buffer_params(efx); + /* Calculate the rx buffer allocation parameters required to + * support the current MTU, including padding for header + * alignment and overruns. + */ + efx->rx_buffer_len = (max(EFX_PAGE_IP_ALIGN, NET_IP_ALIGN) + + EFX_MAX_FRAME_LEN(efx->net_dev->mtu) + + efx->type->rx_buffer_padding); + efx->rx_buffer_order = get_order(efx->rx_buffer_len); /* Initialise the channels */ efx_for_each_channel(channel, efx) { -- cgit v0.10.2 From 2c118e0f6b7f3b8021df3c80c80c0545402f38b4 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:15:29 +0100 Subject: sfc: Removed unncesssary UL suffixes on 0 literals Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 1a065fc..3494f4c 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -793,7 +793,7 @@ static int efx_init_io(struct efx_nic *efx) fail4: release_mem_region(efx->membase_phys, efx->type->mem_map_size); fail3: - efx->membase_phys = 0UL; + efx->membase_phys = 0; fail2: pci_disable_device(efx->pci_dev); fail1: @@ -811,7 +811,7 @@ static void efx_fini_io(struct efx_nic *efx) if (efx->membase_phys) { pci_release_region(efx->pci_dev, efx->type->mem_bar); - efx->membase_phys = 0UL; + efx->membase_phys = 0; } pci_disable_device(efx->pci_dev); -- cgit v0.10.2 From b3475645ed8b823c063f7560b243026150d7c3f8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:15:49 +0100 Subject: sfc: Added and removed braces to comply with kernel style Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 3494f4c..df19e86 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1060,9 +1060,8 @@ static void efx_flush_all(struct efx_nic *efx) cancel_delayed_work_sync(&efx->monitor_work); /* Ensure that all RX slow refills are complete. */ - efx_for_each_rx_queue(rx_queue, efx) { + efx_for_each_rx_queue(rx_queue, efx) cancel_delayed_work_sync(&rx_queue->work); - } /* Stop scheduled port reconfigurations */ cancel_work_sync(&efx->reconfigure_work); @@ -1088,9 +1087,10 @@ static void efx_stop_all(struct efx_nic *efx) falcon_disable_interrupts(efx); if (efx->legacy_irq) synchronize_irq(efx->legacy_irq); - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel_with_interrupt(channel, efx) { if (channel->irq) synchronize_irq(channel->irq); + } /* Stop all NAPI processing and synchronous rx refills */ efx_for_each_channel(channel, efx) diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index c58f8a3..4f96ce4 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1636,9 +1636,10 @@ void falcon_fini_interrupt(struct efx_nic *efx) efx_oword_t reg; /* Disable MSI/MSI-X interrupts */ - efx_for_each_channel_with_interrupt(channel, efx) + efx_for_each_channel_with_interrupt(channel, efx) { if (channel->irq) free_irq(channel->irq, channel); + } /* ACK legacy interrupt */ if (FALCON_REV(efx) >= FALCON_REV_B0) diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 6706223..a641330 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -400,9 +400,10 @@ static int __efx_fast_push_rx_descriptors(struct efx_rx_queue *rx_queue, return 0; /* Record minimum fill level */ - if (unlikely(fill_level < rx_queue->min_fill)) + if (unlikely(fill_level < rx_queue->min_fill)) { if (fill_level) rx_queue->min_fill = fill_level; + } /* Acquire RX add lock. If this lock is contended, then a fast * fill must already be in progress (e.g. in the refill diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index 9b436f5..75eb0fd 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -639,11 +639,12 @@ static void efx_tsoh_block_free(struct efx_tx_queue *tx_queue, base_dma = tsoh->dma_addr & PAGE_MASK; p = &tx_queue->tso_headers_free; - while (*p != NULL) + while (*p != NULL) { if (((unsigned long)*p & PAGE_MASK) == base_kva) *p = (*p)->next; else p = &(*p)->next; + } pci_free_consistent(pci_dev, PAGE_SIZE, (void *)base_kva, base_dma); } @@ -939,9 +940,10 @@ static inline int tso_start_new_packet(struct efx_tx_queue *tx_queue, /* Allocate a DMA-mapped header buffer. */ if (likely(TSOH_SIZE(st->p.header_length) <= TSOH_STD_SIZE)) { - if (tx_queue->tso_headers_free == NULL) + if (tx_queue->tso_headers_free == NULL) { if (efx_tsoh_block_alloc(tx_queue)) return -1; + } EFX_BUG_ON_PARANOID(!tx_queue->tso_headers_free); tsoh = tx_queue->tso_headers_free; tx_queue->tso_headers_free = tsoh->next; @@ -1106,9 +1108,10 @@ static void efx_fini_tso(struct efx_tx_queue *tx_queue) { unsigned i; - if (tx_queue->buffer) + if (tx_queue->buffer) { for (i = 0; i <= tx_queue->efx->type->txd_ring_mask; ++i) efx_tsoh_free(tx_queue, &tx_queue->buffer[i]); + } while (tx_queue->tso_headers_free != NULL) efx_tsoh_block_free(tx_queue, tx_queue->tso_headers_free, -- cgit v0.10.2 From 55668611d0b2a5947cd17f66243be3cebf21400c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:16:10 +0100 Subject: sfc: Replaced various macros with inline functions Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h index 2806201..c98a591 100644 --- a/drivers/net/sfc/bitfield.h +++ b/drivers/net/sfc/bitfield.h @@ -483,7 +483,7 @@ typedef union efx_oword { #endif #define EFX_SET_OWORD_FIELD_VER(efx, oword, field, value) do { \ - if (FALCON_REV(efx) >= FALCON_REV_B0) { \ + if (falcon_rev(efx) >= FALCON_REV_B0) { \ EFX_SET_OWORD_FIELD((oword), field##_B0, (value)); \ } else { \ EFX_SET_OWORD_FIELD((oword), field##_A1, (value)); \ @@ -491,7 +491,7 @@ typedef union efx_oword { } while (0) #define EFX_QWORD_FIELD_VER(efx, qword, field) \ - (FALCON_REV(efx) >= FALCON_REV_B0 ? \ + (falcon_rev(efx) >= FALCON_REV_B0 ? \ EFX_QWORD_FIELD((qword), field##_B0) : \ EFX_QWORD_FIELD((qword), field##_A1)) diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index df19e86..86d4029 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -691,7 +691,7 @@ static void efx_stop_port(struct efx_nic *efx) mutex_unlock(&efx->mac_lock); /* Serialise against efx_set_multicast_list() */ - if (NET_DEV_REGISTERED(efx)) { + if (efx_dev_registered(efx)) { netif_tx_lock_bh(efx->net_dev); netif_tx_unlock_bh(efx->net_dev); } @@ -1030,7 +1030,7 @@ static void efx_start_all(struct efx_nic *efx) return; if ((efx->state != STATE_RUNNING) && (efx->state != STATE_INIT)) return; - if (NET_DEV_REGISTERED(efx) && !netif_running(efx->net_dev)) + if (efx_dev_registered(efx) && !netif_running(efx->net_dev)) return; /* Mark the port as enabled so port reconfigurations can start, then @@ -1112,7 +1112,7 @@ static void efx_stop_all(struct efx_nic *efx) /* Stop the kernel transmit interface late, so the watchdog * timer isn't ticking over the flush */ efx_stop_queue(efx); - if (NET_DEV_REGISTERED(efx)) { + if (efx_dev_registered(efx)) { netif_tx_lock_bh(efx->net_dev); netif_tx_unlock_bh(efx->net_dev); } @@ -1550,7 +1550,7 @@ static void efx_unregister_netdev(struct efx_nic *efx) efx_for_each_tx_queue(tx_queue, efx) efx_release_tx_buffers(tx_queue); - if (NET_DEV_REGISTERED(efx)) { + if (efx_dev_registered(efx)) { strlcpy(efx->name, pci_name(efx->pci_dev), sizeof(efx->name)); unregister_netdev(efx->net_dev); } diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 4f96ce4..e02f1d1 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -145,7 +145,7 @@ MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold"); #define PCI_EXP_LNKSTA_LNK_WID_LBN 4 #define FALCON_IS_DUAL_FUNC(efx) \ - (FALCON_REV(efx) < FALCON_REV_B0) + (falcon_rev(efx) < FALCON_REV_B0) /************************************************************************** * @@ -465,7 +465,7 @@ int falcon_init_tx(struct efx_tx_queue *tx_queue) TX_DESCQ_TYPE, 0, TX_NON_IP_DROP_DIS_B0, 1); - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { int csum = !(efx->net_dev->features & NETIF_F_IP_CSUM); EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_IP_CHKSM_DIS_B0, csum); EFX_SET_OWORD_FIELD(tx_desc_ptr, TX_TCP_CHKSM_DIS_B0, csum); @@ -474,7 +474,7 @@ int falcon_init_tx(struct efx_tx_queue *tx_queue) falcon_write_table(efx, &tx_desc_ptr, efx->type->txd_ptr_tbl_base, tx_queue->queue); - if (FALCON_REV(efx) < FALCON_REV_B0) { + if (falcon_rev(efx) < FALCON_REV_B0) { efx_oword_t reg; BUG_ON(tx_queue->queue >= 128); /* HW limit */ @@ -635,7 +635,7 @@ int falcon_init_rx(struct efx_rx_queue *rx_queue) efx_oword_t rx_desc_ptr; struct efx_nic *efx = rx_queue->efx; int rc; - int is_b0 = FALCON_REV(efx) >= FALCON_REV_B0; + int is_b0 = falcon_rev(efx) >= FALCON_REV_B0; int iscsi_digest_en = is_b0; EFX_LOG(efx, "RX queue %d ring in special buffers %d-%d\n", @@ -822,10 +822,10 @@ static inline void falcon_handle_tx_event(struct efx_channel *channel, tx_ev_q_label = EFX_QWORD_FIELD(*event, TX_EV_Q_LABEL); tx_queue = &efx->tx_queue[tx_ev_q_label]; - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_lock(efx->net_dev); falcon_notify_tx_desc(tx_queue); - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_unlock(efx->net_dev); } else if (EFX_QWORD_FIELD(*event, TX_EV_PKT_ERR) && EFX_WORKAROUND_10727(efx)) { @@ -884,7 +884,7 @@ static void falcon_handle_rx_not_ok(struct efx_rx_queue *rx_queue, RX_EV_TCP_UDP_CHKSUM_ERR); rx_ev_eth_crc_err = EFX_QWORD_FIELD(*event, RX_EV_ETH_CRC_ERR); rx_ev_frm_trunc = EFX_QWORD_FIELD(*event, RX_EV_FRM_TRUNC); - rx_ev_drib_nib = ((FALCON_REV(efx) >= FALCON_REV_B0) ? + rx_ev_drib_nib = ((falcon_rev(efx) >= FALCON_REV_B0) ? 0 : EFX_QWORD_FIELD(*event, RX_EV_DRIB_NIB)); rx_ev_pause_frm = EFX_QWORD_FIELD(*event, RX_EV_PAUSE_FRM_ERR); @@ -1065,7 +1065,7 @@ static void falcon_handle_global_event(struct efx_channel *channel, EFX_QWORD_FIELD(*event, XG_PHY_INTR)) is_phy_event = 1; - if ((FALCON_REV(efx) >= FALCON_REV_B0) && + if ((falcon_rev(efx) >= FALCON_REV_B0) && EFX_OWORD_FIELD(*event, XG_MNT_INTR_B0)) is_phy_event = 1; @@ -1572,7 +1572,7 @@ static void falcon_setup_rss_indir_table(struct efx_nic *efx) unsigned long offset; efx_dword_t dword; - if (FALCON_REV(efx) < FALCON_REV_B0) + if (falcon_rev(efx) < FALCON_REV_B0) return; for (offset = RX_RSS_INDIR_TBL_B0; @@ -1595,7 +1595,7 @@ int falcon_init_interrupt(struct efx_nic *efx) if (!EFX_INT_MODE_USE_MSI(efx)) { irq_handler_t handler; - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) handler = falcon_legacy_interrupt_b0; else handler = falcon_legacy_interrupt_a1; @@ -1642,7 +1642,7 @@ void falcon_fini_interrupt(struct efx_nic *efx) } /* ACK legacy interrupt */ - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) falcon_read(efx, ®, INT_ISR0_B0); else falcon_irq_ack_a1(efx); @@ -1733,7 +1733,7 @@ void falcon_drain_tx_fifo(struct efx_nic *efx) efx_oword_t temp; int count; - if ((FALCON_REV(efx) < FALCON_REV_B0) || + if ((falcon_rev(efx) < FALCON_REV_B0) || (efx->loopback_mode != LOOPBACK_NONE)) return; @@ -1786,7 +1786,7 @@ void falcon_deconfigure_mac_wrapper(struct efx_nic *efx) { efx_oword_t temp; - if (FALCON_REV(efx) < FALCON_REV_B0) + if (falcon_rev(efx) < FALCON_REV_B0) return; /* Isolate the MAC -> RX */ @@ -1824,7 +1824,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) MAC_SPEED, link_speed); /* On B0, MAC backpressure can be disabled and packets get * discarded. */ - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { EFX_SET_OWORD_FIELD(reg, TXFIFO_DRAIN_EN_B0, !efx->link_up); } @@ -1842,7 +1842,7 @@ void falcon_reconfigure_mac_wrapper(struct efx_nic *efx) EFX_SET_OWORD_FIELD_VER(efx, reg, RX_XOFF_MAC_EN, tx_fc); /* Unisolate the MAC -> RX */ - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) EFX_SET_OWORD_FIELD(reg, RX_INGR_EN_B0, 1); falcon_write(efx, ®, RX_CFG_REG_KER); } @@ -1857,7 +1857,7 @@ int falcon_dma_stats(struct efx_nic *efx, unsigned int done_offset) return 0; /* Statistics fetch will fail if the MAC is in TX drain */ - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { efx_oword_t temp; falcon_read(efx, &temp, MAC0_CTRL_REG_KER); if (EFX_OWORD_FIELD(temp, TXFIFO_DRAIN_EN_B0)) @@ -2114,7 +2114,7 @@ int falcon_probe_port(struct efx_nic *efx) falcon_init_mdio(&efx->mii); /* Hardware flow ctrl. FalconA RX FIFO too small for pause generation */ - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) efx->flow_control = EFX_FC_RX | EFX_FC_TX; else efx->flow_control = EFX_FC_RX; @@ -2374,7 +2374,7 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) return -ENODEV; } - switch (FALCON_REV(efx)) { + switch (falcon_rev(efx)) { case FALCON_REV_A0: case 0xff: EFX_ERR(efx, "Falcon rev A0 not supported\n"); @@ -2400,7 +2400,7 @@ static int falcon_probe_nic_variant(struct efx_nic *efx) break; default: - EFX_ERR(efx, "Unknown Falcon rev %d\n", FALCON_REV(efx)); + EFX_ERR(efx, "Unknown Falcon rev %d\n", falcon_rev(efx)); return -ENODEV; } @@ -2563,7 +2563,7 @@ int falcon_init_nic(struct efx_nic *efx) /* Set number of RSS queues for receive path. */ falcon_read(efx, &temp, RX_FILTER_CTL_REG); - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) EFX_SET_OWORD_FIELD(temp, NUM_KER, 0); else EFX_SET_OWORD_FIELD(temp, NUM_KER, efx->rss_queues - 1); @@ -2601,7 +2601,7 @@ int falcon_init_nic(struct efx_nic *efx) /* Prefetch threshold 2 => fetch when descriptor cache half empty */ EFX_SET_OWORD_FIELD(temp, TX_PREF_THRESHOLD, 2); /* Squash TX of packets of 16 bytes or less */ - if (FALCON_REV(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx)) + if (falcon_rev(efx) >= FALCON_REV_B0 && EFX_WORKAROUND_9141(efx)) EFX_SET_OWORD_FIELD(temp, TX_FLUSH_MIN_LEN_EN_B0, 1); falcon_write(efx, &temp, TX_CFG2_REG_KER); @@ -2618,7 +2618,7 @@ int falcon_init_nic(struct efx_nic *efx) if (EFX_WORKAROUND_7575(efx)) EFX_SET_OWORD_FIELD_VER(efx, temp, RX_USR_BUF_SIZE, (3 * 4096) / 32); - if (FALCON_REV(efx) >= FALCON_REV_B0) + if (falcon_rev(efx) >= FALCON_REV_B0) EFX_SET_OWORD_FIELD(temp, RX_INGR_EN_B0, 1); /* RX FIFO flow control thresholds */ @@ -2634,7 +2634,7 @@ int falcon_init_nic(struct efx_nic *efx) falcon_write(efx, &temp, RX_CFG_REG_KER); /* Set destination of both TX and RX Flush events */ - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { EFX_POPULATE_OWORD_1(temp, FLS_EVQ_ID, 0); falcon_write(efx, &temp, DP_CTRL_REG); } diff --git a/drivers/net/sfc/falcon.h b/drivers/net/sfc/falcon.h index 6117403..492f9bc 100644 --- a/drivers/net/sfc/falcon.h +++ b/drivers/net/sfc/falcon.h @@ -23,7 +23,10 @@ enum falcon_revision { FALCON_REV_B0 = 2, }; -#define FALCON_REV(efx) ((efx)->pci_dev->revision) +static inline int falcon_rev(struct efx_nic *efx) +{ + return efx->pci_dev->revision; +} extern struct efx_nic_type falcon_a_nic_type; extern struct efx_nic_type falcon_b_nic_type; diff --git a/drivers/net/sfc/falcon_io.h b/drivers/net/sfc/falcon_io.h index ea08184..6670cdf 100644 --- a/drivers/net/sfc/falcon_io.h +++ b/drivers/net/sfc/falcon_io.h @@ -56,14 +56,27 @@ #define FALCON_USE_QWORD_IO 1 #endif -#define _falcon_writeq(efx, value, reg) \ - __raw_writeq((__force u64) (value), (efx)->membase + (reg)) -#define _falcon_writel(efx, value, reg) \ - __raw_writel((__force u32) (value), (efx)->membase + (reg)) -#define _falcon_readq(efx, reg) \ - ((__force __le64) __raw_readq((efx)->membase + (reg))) -#define _falcon_readl(efx, reg) \ - ((__force __le32) __raw_readl((efx)->membase + (reg))) +#ifdef FALCON_USE_QWORD_IO +static inline void _falcon_writeq(struct efx_nic *efx, __le64 value, + unsigned int reg) +{ + __raw_writeq((__force u64)value, efx->membase + reg); +} +static inline __le64 _falcon_readq(struct efx_nic *efx, unsigned int reg) +{ + return (__force __le64)__raw_readq(efx->membase + reg); +} +#endif + +static inline void _falcon_writel(struct efx_nic *efx, __le32 value, + unsigned int reg) +{ + __raw_writel((__force u32)value, efx->membase + reg); +} +static inline __le32 _falcon_readl(struct efx_nic *efx, unsigned int reg) +{ + return (__force __le32)__raw_readl(efx->membase + reg); +} /* Writes to a normal 16-byte Falcon register, locking as appropriate. */ static inline void falcon_write(struct efx_nic *efx, efx_oword_t *value, diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index d2978d4..dbdcee4 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -221,7 +221,7 @@ static int falcon_xgmii_status(struct efx_nic *efx) { efx_dword_t reg; - if (FALCON_REV(efx) < FALCON_REV_B0) + if (falcon_rev(efx) < FALCON_REV_B0) return 1; /* The ISR latches, so clear it and re-read */ @@ -241,7 +241,7 @@ static void falcon_mask_status_intr(struct efx_nic *efx, int enable) { efx_dword_t reg; - if ((FALCON_REV(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx)) + if ((falcon_rev(efx) < FALCON_REV_B0) || LOOPBACK_INTERNAL(efx)) return; /* Flush the ISR */ @@ -639,7 +639,7 @@ int falcon_xmac_set_pause(struct efx_nic *efx, enum efx_fc_type flow_control) reset = ((flow_control & EFX_FC_TX) && !(efx->flow_control & EFX_FC_TX)); if (EFX_WORKAROUND_11482(efx) && reset) { - if (FALCON_REV(efx) >= FALCON_REV_B0) { + if (falcon_rev(efx) >= FALCON_REV_B0) { /* Recover by resetting the EM block */ if (efx->link_up) falcon_drain_tx_fifo(efx); diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 59f261b..18b21ef 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -52,28 +52,19 @@ #define EFX_WARN_ON_PARANOID(x) do {} while (0) #endif -#define NET_DEV_REGISTERED(efx) \ - ((efx)->net_dev->reg_state == NETREG_REGISTERED) - -/* Include net device name in log messages if it has been registered. - * Use efx->name not efx->net_dev->name so that races with (un)registration - * are harmless. - */ -#define NET_DEV_NAME(efx) (NET_DEV_REGISTERED(efx) ? (efx)->name : "") - /* Un-rate-limited logging */ #define EFX_ERR(efx, fmt, args...) \ -dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_err(&((efx)->pci_dev->dev), "ERR: %s " fmt, efx_dev_name(efx), ##args) #define EFX_INFO(efx, fmt, args...) \ -dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_info(&((efx)->pci_dev->dev), "INFO: %s " fmt, efx_dev_name(efx), ##args) #ifdef EFX_ENABLE_DEBUG #define EFX_LOG(efx, fmt, args...) \ -dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_info(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args) #else #define EFX_LOG(efx, fmt, args...) \ -dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, NET_DEV_NAME(efx), ##args) +dev_dbg(&((efx)->pci_dev->dev), "DBG: %s " fmt, efx_dev_name(efx), ##args) #endif #define EFX_TRACE(efx, fmt, args...) do {} while (0) @@ -760,6 +751,20 @@ struct efx_nic { void *loopback_selftest; }; +static inline int efx_dev_registered(struct efx_nic *efx) +{ + return efx->net_dev->reg_state == NETREG_REGISTERED; +} + +/* Net device name, for inclusion in log messages if it has been registered. + * Use efx->name not efx->net_dev->name so that races with (un)registration + * are harmless. + */ +static inline const char *efx_dev_name(struct efx_nic *efx) +{ + return efx_dev_registered(efx) ? efx->name : ""; +} + /** * struct efx_nic_type - Efx device type definition * @mem_bar: Memory BAR number diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index a641330..f15d332 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -86,14 +86,21 @@ static unsigned int rx_refill_limit = 95; */ #define EFX_RXD_HEAD_ROOM 2 -/* Macros for zero-order pages (potentially) containing multiple RX buffers */ -#define RX_DATA_OFFSET(_data) \ - (((unsigned long) (_data)) & (PAGE_SIZE-1)) -#define RX_BUF_OFFSET(_rx_buf) \ - RX_DATA_OFFSET((_rx_buf)->data) - -#define RX_PAGE_SIZE(_efx) \ - (PAGE_SIZE * (1u << (_efx)->rx_buffer_order)) +static inline unsigned int efx_page_offset(void *p) +{ + return (__force unsigned int)p & (PAGE_SIZE - 1); +} +static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf) +{ + /* Offset is always within one page, so we don't need to consider + * the page order. + */ + return efx_page_offset(buf->data); +} +static inline unsigned int efx_rx_buf_size(struct efx_nic *efx) +{ + return PAGE_SIZE << efx->rx_buffer_order; +} /************************************************************************** @@ -269,7 +276,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, return -ENOMEM; dma_addr = pci_map_page(efx->pci_dev, rx_buf->page, - 0, RX_PAGE_SIZE(efx), + 0, efx_rx_buf_size(efx), PCI_DMA_FROMDEVICE); if (unlikely(pci_dma_mapping_error(dma_addr))) { @@ -284,7 +291,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, EFX_PAGE_IP_ALIGN); } - offset = RX_DATA_OFFSET(rx_queue->buf_data); + offset = efx_page_offset(rx_queue->buf_data); rx_buf->len = bytes; rx_buf->dma_addr = rx_queue->buf_dma_addr + offset; rx_buf->data = rx_queue->buf_data; @@ -295,7 +302,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, rx_queue->buf_data += ((bytes + 0x1ff) & ~0x1ff); offset += ((bytes + 0x1ff) & ~0x1ff); - space = RX_PAGE_SIZE(efx) - offset; + space = efx_rx_buf_size(efx) - offset; if (space >= bytes) { /* Refs dropped on kernel releasing each skb */ get_page(rx_queue->buf_page); @@ -344,7 +351,8 @@ static inline void efx_unmap_rx_buffer(struct efx_nic *efx, EFX_BUG_ON_PARANOID(rx_buf->skb); if (rx_buf->unmap_addr) { pci_unmap_page(efx->pci_dev, rx_buf->unmap_addr, - RX_PAGE_SIZE(efx), PCI_DMA_FROMDEVICE); + efx_rx_buf_size(efx), + PCI_DMA_FROMDEVICE); rx_buf->unmap_addr = 0; } } else if (likely(rx_buf->skb)) { @@ -553,7 +561,7 @@ static inline void efx_rx_packet_lro(struct efx_channel *channel, struct skb_frag_struct frags; frags.page = rx_buf->page; - frags.page_offset = RX_BUF_OFFSET(rx_buf); + frags.page_offset = efx_rx_buf_offset(rx_buf); frags.size = rx_buf->len; lro_receive_frags(lro_mgr, &frags, rx_buf->len, @@ -598,7 +606,7 @@ static inline struct sk_buff *efx_rx_mk_skb(struct efx_rx_buffer *rx_buf, if (unlikely(rx_buf->len > hdr_len)) { struct skb_frag_struct *frag = skb_shinfo(skb)->frags; frag->page = rx_buf->page; - frag->page_offset = RX_BUF_OFFSET(rx_buf) + hdr_len; + frag->page_offset = efx_rx_buf_offset(rx_buf) + hdr_len; frag->size = skb->len - hdr_len; skb_shinfo(skb)->nr_frags = 1; skb->data_len = frag->size; @@ -852,7 +860,8 @@ void efx_fini_rx_queue(struct efx_rx_queue *rx_queue) /* For a page that is part-way through splitting into RX buffers */ if (rx_queue->buf_page != NULL) { pci_unmap_page(rx_queue->efx->pci_dev, rx_queue->buf_dma_addr, - RX_PAGE_SIZE(rx_queue->efx), PCI_DMA_FROMDEVICE); + efx_rx_buf_size(rx_queue->efx), + PCI_DMA_FROMDEVICE); __free_pages(rx_queue->buf_page, rx_queue->efx->rx_buffer_order); rx_queue->buf_page = NULL; diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index cbda159..2fb69d8 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -424,10 +424,10 @@ static int efx_tx_loopback(struct efx_tx_queue *tx_queue) * interrupt handler. */ smp_wmb(); - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_lock_bh(efx->net_dev); rc = efx_xmit(efx, tx_queue, skb); - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_unlock_bh(efx->net_dev); if (rc != NETDEV_TX_OK) { @@ -453,7 +453,7 @@ static int efx_rx_loopback(struct efx_tx_queue *tx_queue, int tx_done = 0, rx_good, rx_bad; int i, rc = 0; - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_lock_bh(efx->net_dev); /* Count the number of tx completions, and decrement the refcnt. Any @@ -465,7 +465,7 @@ static int efx_rx_loopback(struct efx_tx_queue *tx_queue, dev_kfree_skb_any(skb); } - if (NET_DEV_REGISTERED(efx)) + if (efx_dev_registered(efx)) netif_tx_unlock_bh(efx->net_dev); /* Check TX completion and received packet counts */ diff --git a/drivers/net/sfc/tx.c b/drivers/net/sfc/tx.c index 75eb0fd..5cdd082 100644 --- a/drivers/net/sfc/tx.c +++ b/drivers/net/sfc/tx.c @@ -387,7 +387,7 @@ void efx_xmit_done(struct efx_tx_queue *tx_queue, unsigned int index) if (unlikely(tx_queue->stopped)) { fill_level = tx_queue->insert_count - tx_queue->read_count; if (fill_level < EFX_NETDEV_TX_THRESHOLD(tx_queue)) { - EFX_BUG_ON_PARANOID(!NET_DEV_REGISTERED(efx)); + EFX_BUG_ON_PARANOID(!efx_dev_registered(efx)); /* Do this under netif_tx_lock(), to avoid racing * with efx_xmit(). */ diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index dca62f1..35ab19c2 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -16,7 +16,7 @@ */ #define EFX_WORKAROUND_ALWAYS(efx) 1 -#define EFX_WORKAROUND_FALCON_A(efx) (FALCON_REV(efx) <= FALCON_REV_A1) +#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1) /* XAUI resets if link not detected */ #define EFX_WORKAROUND_5147 EFX_WORKAROUND_ALWAYS -- cgit v0.10.2 From 184be0c21aba048cf510036edeee095e68740951 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:16:31 +0100 Subject: sfc: Merged efx_page_offset() into efx_rx_buf_offset() Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index f15d332..88f87ef 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -86,16 +86,12 @@ static unsigned int rx_refill_limit = 95; */ #define EFX_RXD_HEAD_ROOM 2 -static inline unsigned int efx_page_offset(void *p) -{ - return (__force unsigned int)p & (PAGE_SIZE - 1); -} static inline unsigned int efx_rx_buf_offset(struct efx_rx_buffer *buf) { /* Offset is always within one page, so we don't need to consider * the page order. */ - return efx_page_offset(buf->data); + return (__force unsigned long) buf->data & (PAGE_SIZE - 1); } static inline unsigned int efx_rx_buf_size(struct efx_nic *efx) { @@ -291,10 +287,10 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, EFX_PAGE_IP_ALIGN); } - offset = efx_page_offset(rx_queue->buf_data); rx_buf->len = bytes; - rx_buf->dma_addr = rx_queue->buf_dma_addr + offset; rx_buf->data = rx_queue->buf_data; + offset = efx_rx_buf_offset(rx_buf); + rx_buf->dma_addr = rx_queue->buf_dma_addr + offset; /* Try to pack multiple buffers per page */ if (efx->rx_buffer_order == 0) { -- cgit v0.10.2 From 086ea3564a5378a06c7cbfaf9d2727bc58a8c285 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:17:06 +0100 Subject: sfc: Use resource_size_t for PCI bus address This should make the driver work on 32-bit systems with 64-bit PCI support. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 86d4029..f6131e5 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -778,15 +778,16 @@ static int efx_init_io(struct efx_nic *efx) efx->membase = ioremap_nocache(efx->membase_phys, efx->type->mem_map_size); if (!efx->membase) { - EFX_ERR(efx, "could not map memory BAR %d at %lx+%x\n", - efx->type->mem_bar, efx->membase_phys, + EFX_ERR(efx, "could not map memory BAR %d at %llx+%x\n", + efx->type->mem_bar, + (unsigned long long)efx->membase_phys, efx->type->mem_map_size); rc = -ENOMEM; goto fail4; } - EFX_LOG(efx, "memory BAR %u at %lx+%x (virtual %p)\n", - efx->type->mem_bar, efx->membase_phys, efx->type->mem_map_size, - efx->membase); + EFX_LOG(efx, "memory BAR %u at %llx+%x (virtual %p)\n", + efx->type->mem_bar, (unsigned long long)efx->membase_phys, + efx->type->mem_map_size, efx->membase); return 0; diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 18b21ef..a84f975 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -686,7 +686,7 @@ struct efx_nic { struct workqueue_struct *workqueue; struct work_struct reset_work; struct delayed_work monitor_work; - unsigned long membase_phys; + resource_size_t membase_phys; void __iomem *membase; spinlock_t biu_lock; enum efx_int_mode interrupt_mode; -- cgit v0.10.2 From 5b9e207ced5bb7af98b3c147171893435f5104ca Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:18:14 +0100 Subject: sfc: Correct and expand some comments These comments have been revised in response to questions raised by Andrew Morton in <20080501120858.207b6dd6.akpm@linux-foundation.org>. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index f6131e5..11ee0d4 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -199,11 +199,12 @@ static inline int efx_process_channel(struct efx_channel *channel, int rx_quota) */ static inline void efx_channel_processed(struct efx_channel *channel) { - /* Write to EVQ_RPTR_REG. If a new event arrived in a race - * with finishing processing, a new interrupt will be raised. - */ + /* The interrupt handler for this channel may set work_pending + * as soon as we acknowledge the events we've seen. Make sure + * it's cleared before then. */ channel->work_pending = 0; - smp_wmb(); /* Ensure channel updated before any new interrupt. */ + smp_wmb(); + falcon_eventq_read_ack(channel); } @@ -427,9 +428,12 @@ static void efx_start_channel(struct efx_channel *channel) netif_napi_add(channel->napi_dev, &channel->napi_str, efx_poll, napi_weight); + /* The interrupt handler for this channel may set work_pending + * as soon as we enable it. Make sure it's cleared before + * then. Similarly, make sure it sees the enabled flag set. */ channel->work_pending = 0; channel->enabled = 1; - smp_wmb(); /* ensure channel updated before first interrupt */ + smp_wmb(); napi_enable(&channel->napi_str); @@ -1332,13 +1336,17 @@ static int efx_net_stop(struct net_device *net_dev) return 0; } -/* Context: process, dev_base_lock held, non-blocking. */ +/* Context: process, dev_base_lock or RTNL held, non-blocking. */ static struct net_device_stats *efx_net_stats(struct net_device *net_dev) { struct efx_nic *efx = net_dev->priv; struct efx_mac_stats *mac_stats = &efx->mac_stats; struct net_device_stats *stats = &net_dev->stats; + /* Update stats if possible, but do not wait if another thread + * is updating them (or resetting the NIC); slightly stale + * stats are acceptable. + */ if (!spin_trylock(&efx->stats_lock)) return stats; if (efx->state == STATE_RUNNING) { -- cgit v0.10.2 From 9bbd7d9a3528de1b5b915fa77df027b4de62174c Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:18:48 +0100 Subject: sfc: Use DMA_BIT_MASK() instead of our own DMA mask macros Also change type of efx_nic_type::max_dma_mask to u64, matching pci_dma_supported() parameter type. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/bitfield.h b/drivers/net/sfc/bitfield.h index c98a591..2c79d27 100644 --- a/drivers/net/sfc/bitfield.h +++ b/drivers/net/sfc/bitfield.h @@ -501,8 +501,5 @@ typedef union efx_oword { #define DMA_ADDR_T_WIDTH (8 * sizeof(dma_addr_t)) #define EFX_DMA_TYPE_WIDTH(width) \ (((width) < DMA_ADDR_T_WIDTH) ? (width) : DMA_ADDR_T_WIDTH) -#define EFX_DMA_MAX_MASK ((DMA_ADDR_T_WIDTH == 64) ? \ - ~((u64) 0) : ~((u32) 0)) -#define EFX_DMA_MASK(mask) ((mask) & EFX_DMA_MAX_MASK) #endif /* EFX_BITFIELD_H */ diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index e02f1d1..475b596 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -116,17 +116,8 @@ MODULE_PARM_DESC(rx_xon_thresh_bytes, "RX fifo XON threshold"); ************************************************************************** */ -/* DMA address mask (up to 46-bit, avoiding compiler warnings) - * - * Note that it is possible to have a platform with 64-bit longs and - * 32-bit DMA addresses, or vice versa. EFX_DMA_MASK takes care of the - * platform DMA mask. - */ -#if BITS_PER_LONG == 64 -#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffUL) -#else -#define FALCON_DMA_MASK EFX_DMA_MASK(0x00003fffffffffffULL) -#endif +/* DMA address mask */ +#define FALCON_DMA_MASK DMA_BIT_MASK(46) /* TX DMA length mask (13-bit) */ #define FALCON_TX_DMA_MASK (4096 - 1) diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index a84f975..77418ae 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -800,7 +800,7 @@ struct efx_nic_type { unsigned int txd_ring_mask; unsigned int rxd_ring_mask; unsigned int evq_size; - dma_addr_t max_dma_mask; + u64 max_dma_mask; unsigned int tx_dma_mask; unsigned bug5391_mask; -- cgit v0.10.2 From 6f8135ca7224d98c2de43edde69f4e6bec12da0e Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:19:05 +0100 Subject: sfc: Do not define inline macro Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index 77418ae..be09180 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -81,11 +81,6 @@ do {if (net_ratelimit()) EFX_INFO(efx, fmt, ##args); } while (0) #define EFX_LOG_RL(efx, fmt, args...) \ do {if (net_ratelimit()) EFX_LOG(efx, fmt, ##args); } while (0) -/* Kernel headers may redefine inline anyway */ -#ifndef inline -#define inline inline __attribute__ ((always_inline)) -#endif - /************************************************************************** * * Efx data structures -- cgit v0.10.2 From 24c28edc5a1b1dc4677eb13408ff3492d65df159 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:19:21 +0100 Subject: sfc: Use __packed macro Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/falcon_hwdefs.h b/drivers/net/sfc/falcon_hwdefs.h index 06e2d68..6d00311 100644 --- a/drivers/net/sfc/falcon_hwdefs.h +++ b/drivers/net/sfc/falcon_hwdefs.h @@ -1125,7 +1125,7 @@ struct falcon_nvconfig_board_v2 { u8 port1_phy_type; __le16 asic_sub_revision; __le16 board_revision; -} __attribute__ ((packed)); +} __packed; #define NVCONFIG_BASE 0x300 #define NVCONFIG_BOARD_MAGIC_NUM 0xFA1C @@ -1144,6 +1144,6 @@ struct falcon_nvconfig { __le16 board_struct_ver; __le16 board_checksum; struct falcon_nvconfig_board_v2 board_v2; -} __attribute__ ((packed)); +} __packed; #endif /* EFX_FALCON_HWDEFS_H */ -- cgit v0.10.2 From 5daab96d873721cb84f4583f232b88fcd67c51fb Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:19:43 +0100 Subject: sfc: Change type of efx_nic::nic_data to struct falcon_nic_data * Remove redundant casts and variable. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index 475b596..ac14460 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -2411,7 +2411,7 @@ int falcon_probe_nic(struct efx_nic *efx) /* Allocate storage for hardware specific data */ nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL); - efx->nic_data = (void *) nic_data; + efx->nic_data = nic_data; /* Determine number of ports etc. */ rc = falcon_probe_nic_variant(efx); @@ -2481,13 +2481,10 @@ int falcon_probe_nic(struct efx_nic *efx) */ int falcon_init_nic(struct efx_nic *efx) { - struct falcon_nic_data *data; efx_oword_t temp; unsigned thresh; int rc; - data = (struct falcon_nic_data *)efx->nic_data; - /* Set up the address region register. This is only needed * for the B0 FPGA, but since we are just pushing in the * reset defaults this may as well be unconditional. */ diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index be09180..f4757e1 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -705,7 +705,7 @@ struct efx_nic { unsigned n_rx_nodesc_drop_cnt; - void *nic_data; + struct falcon_nic_data *nic_data; struct mutex mac_lock; int port_enabled; -- cgit v0.10.2 From d3208b5ebae9e62c32f0cf74dce1d4ddfac3f895 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:20:00 +0100 Subject: sfc: Remove redundant casts to and from void * Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 11ee0d4..4497606 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1490,7 +1490,7 @@ static void efx_set_multicast_list(struct net_device *net_dev) static int efx_netdev_event(struct notifier_block *this, unsigned long event, void *ptr) { - struct net_device *net_dev = (struct net_device *)ptr; + struct net_device *net_dev = ptr; if (net_dev->open == efx_net_open && event == NETDEV_CHANGENAME) { struct efx_nic *efx = net_dev->priv; diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index ac14460..d3f749c 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -1396,7 +1396,7 @@ static inline void falcon_irq_ack_a1(struct efx_nic *efx) static irqreturn_t falcon_fatal_interrupt(struct efx_nic *efx) { struct falcon_nic_data *nic_data = efx->nic_data; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + efx_oword_t *int_ker = efx->irq_status.addr; efx_oword_t fatal_intr; int error, mem_perr; static int n_int_errors; @@ -1442,8 +1442,8 @@ out: */ static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id) { - struct efx_nic *efx = (struct efx_nic *)dev_id; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + struct efx_nic *efx = dev_id; + efx_oword_t *int_ker = efx->irq_status.addr; struct efx_channel *channel; efx_dword_t reg; u32 queues; @@ -1480,8 +1480,8 @@ static irqreturn_t falcon_legacy_interrupt_b0(int irq, void *dev_id) static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) { - struct efx_nic *efx = (struct efx_nic *)dev_id; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + struct efx_nic *efx = dev_id; + efx_oword_t *int_ker = efx->irq_status.addr; struct efx_channel *channel; int syserr; int queues; @@ -1533,9 +1533,9 @@ static irqreturn_t falcon_legacy_interrupt_a1(int irq, void *dev_id) */ static irqreturn_t falcon_msi_interrupt(int irq, void *dev_id) { - struct efx_channel *channel = (struct efx_channel *)dev_id; + struct efx_channel *channel = dev_id; struct efx_nic *efx = channel->efx; - efx_oword_t *int_ker = (efx_oword_t *) efx->irq_status.addr; + efx_oword_t *int_ker = efx->irq_status.addr; int syserr; efx->last_irq_cpu = raw_smp_processor_id(); @@ -1932,7 +1932,7 @@ static int falcon_gmii_wait(struct efx_nic *efx) static void falcon_mdio_write(struct net_device *net_dev, int phy_id, int addr, int value) { - struct efx_nic *efx = (struct efx_nic *)net_dev->priv; + struct efx_nic *efx = net_dev->priv; unsigned int phy_id2 = phy_id & FALCON_PHY_ID_ID_MASK; efx_oword_t reg; @@ -2000,7 +2000,7 @@ static void falcon_mdio_write(struct net_device *net_dev, int phy_id, * could be read, -1 will be returned. */ static int falcon_mdio_read(struct net_device *net_dev, int phy_id, int addr) { - struct efx_nic *efx = (struct efx_nic *)net_dev->priv; + struct efx_nic *efx = net_dev->priv; unsigned int phy_addr = phy_id & FALCON_PHY_ID_ID_MASK; efx_oword_t reg; int value = -1; diff --git a/drivers/net/sfc/rx.c b/drivers/net/sfc/rx.c index 88f87ef..601b001 100644 --- a/drivers/net/sfc/rx.c +++ b/drivers/net/sfc/rx.c @@ -109,7 +109,7 @@ static inline unsigned int efx_rx_buf_size(struct efx_nic *efx) static int efx_lro_get_skb_hdr(struct sk_buff *skb, void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags, void *priv) { - struct efx_channel *channel = (struct efx_channel *)priv; + struct efx_channel *channel = priv; struct iphdr *iph; struct tcphdr *th; @@ -134,12 +134,12 @@ static int efx_get_frag_hdr(struct skb_frag_struct *frag, void **mac_hdr, void **ip_hdr, void **tcpudp_hdr, u64 *hdr_flags, void *priv) { - struct efx_channel *channel = (struct efx_channel *)priv; + struct efx_channel *channel = priv; struct ethhdr *eh; struct iphdr *iph; /* We support EtherII and VLAN encapsulated IPv4 */ - eh = (struct ethhdr *)(page_address(frag->page) + frag->page_offset); + eh = page_address(frag->page) + frag->page_offset; *mac_hdr = eh; if (eh->h_proto == htons(ETH_P_IP)) { @@ -283,7 +283,7 @@ static inline int efx_init_rx_buffer_page(struct efx_rx_queue *rx_queue, rx_queue->buf_page = rx_buf->page; rx_queue->buf_dma_addr = dma_addr; - rx_queue->buf_data = ((char *) page_address(rx_buf->page) + + rx_queue->buf_data = (page_address(rx_buf->page) + EFX_PAGE_IP_ALIGN); } diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index 2fb69d8..c98f3505 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -290,7 +290,7 @@ void efx_loopback_rx_packet(struct efx_nic *efx, payload = &state->payload; - received = (struct efx_loopback_payload *)(char *) buf_ptr; + received = (struct efx_loopback_payload *) buf_ptr; received->ip.saddr = payload->ip.saddr; received->ip.check = payload->ip.check; @@ -700,7 +700,7 @@ int efx_offline_test(struct efx_nic *efx, * "flushing" so all inflight packets are dropped */ BUG_ON(efx->loopback_selftest); state->flush = 1; - efx->loopback_selftest = (void *)state; + efx->loopback_selftest = state; rc = efx_test_loopbacks(efx, tests, loopback_modes); diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index 3b9f9dd..cf75fab 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -85,7 +85,7 @@ static int xfp_phy_init(struct efx_nic *efx) int rc; phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL); - efx->phy_data = (void *) phy_data; + efx->phy_data = phy_data; EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision" " %x)\n", devid, MDIO_ID_OUI(devid), MDIO_ID_MODEL(devid), -- cgit v0.10.2 From 9b7bfc4c4c601a5cb368751f60cac054492c45f5 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:20:20 +0100 Subject: sfc: Added checks for heap allocation failure Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/selftest.c b/drivers/net/sfc/selftest.c index c98f3505..3b2de9f 100644 --- a/drivers/net/sfc/selftest.c +++ b/drivers/net/sfc/selftest.c @@ -517,6 +517,8 @@ efx_test_loopback(struct efx_tx_queue *tx_queue, state->packet_count = min(1 << (i << 2), state->packet_count); state->skbs = kzalloc(sizeof(state->skbs[0]) * state->packet_count, GFP_KERNEL); + if (!state->skbs) + return -ENOMEM; state->flush = 0; EFX_LOG(efx, "TX queue %d testing %s loopback with %d " diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c index 38e96ed..c014606 100644 --- a/drivers/net/sfc/tenxpress.c +++ b/drivers/net/sfc/tenxpress.c @@ -211,6 +211,8 @@ static int tenxpress_phy_init(struct efx_nic *efx) int rc = 0; phy_data = kzalloc(sizeof(*phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; efx->phy_data = phy_data; tenxpress_set_state(efx, TENXPRESS_STATUS_NORMAL); diff --git a/drivers/net/sfc/xfp_phy.c b/drivers/net/sfc/xfp_phy.c index cf75fab..f3684ad 100644 --- a/drivers/net/sfc/xfp_phy.c +++ b/drivers/net/sfc/xfp_phy.c @@ -85,6 +85,8 @@ static int xfp_phy_init(struct efx_nic *efx) int rc; phy_data = kzalloc(sizeof(struct xfp_phy_data), GFP_KERNEL); + if (!phy_data) + return -ENOMEM; efx->phy_data = phy_data; EFX_INFO(efx, "XFP: PHY ID reg %x (OUI %x model %x revision" -- cgit v0.10.2 From 8757a5f71530c2dc8db7823ad68a5d4c2fbdad19 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 16 May 2008 21:21:06 +0100 Subject: sfc: Remove sub-minor component from driver version This driver has diverged from the out-of-tree driver to which the version number originally applied. It should be identified primarily by kernel version. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h index f4757e1..5e20e75 100644 --- a/drivers/net/sfc/net_driver.h +++ b/drivers/net/sfc/net_driver.h @@ -42,7 +42,7 @@ #ifndef EFX_DRIVER_NAME #define EFX_DRIVER_NAME "sfc" #endif -#define EFX_DRIVER_VERSION "2.2.0136" +#define EFX_DRIVER_VERSION "2.2" #ifdef EFX_ENABLE_DEBUG #define EFX_BUG_ON_PARANOID(x) BUG_ON(x) -- cgit v0.10.2 From d494eacde8858f9b53f5c640692caf14eb3c8239 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Wed, 14 May 2008 17:04:13 -0700 Subject: sky2: restore vlan acceleration on reset If device has to be reset by sky2_restart, then need to restore the VLAN acceleration settings. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index f226bca..3bb6053 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -1159,17 +1159,9 @@ static int sky2_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) } #ifdef SKY2_VLAN_TAG_USED -static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +static void sky2_set_vlan_mode(struct sky2_hw *hw, u16 port, bool onoff) { - struct sky2_port *sky2 = netdev_priv(dev); - struct sky2_hw *hw = sky2->hw; - u16 port = sky2->port; - - netif_tx_lock_bh(dev); - napi_disable(&hw->napi); - - sky2->vlgrp = grp; - if (grp) { + if (onoff) { sky2_write32(hw, SK_REG(port, RX_GMF_CTRL_T), RX_VLAN_STRIP_ON); sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), @@ -1180,6 +1172,19 @@ static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp sky2_write32(hw, SK_REG(port, TX_GMF_CTRL_T), TX_VLAN_TAG_OFF); } +} + +static void sky2_vlan_rx_register(struct net_device *dev, struct vlan_group *grp) +{ + struct sky2_port *sky2 = netdev_priv(dev); + struct sky2_hw *hw = sky2->hw; + u16 port = sky2->port; + + netif_tx_lock_bh(dev); + napi_disable(&hw->napi); + + sky2->vlgrp = grp; + sky2_set_vlan_mode(hw, port, grp != NULL); sky2_read32(hw, B0_Y2_SP_LISR); napi_enable(&hw->napi); @@ -1418,6 +1423,10 @@ static int sky2_up(struct net_device *dev) sky2_prefetch_init(hw, txqaddr[port], sky2->tx_le_map, TX_RING_SIZE - 1); +#ifdef SKY2_VLAN_TAG_USED + sky2_set_vlan_mode(hw, port, sky2->vlgrp != NULL); +#endif + err = sky2_rx_start(sky2); if (err) goto err_out; -- cgit v0.10.2 From 5bceeda3253d9ea6a38e2e918362a2610677f9c0 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:12 -0700 Subject: [netdrvr] dm9000: use delayed work to update mii phy state fix use cancel_delayed_work_sync() Cc: Ben Dooks Cc: Enrico Scholz Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/dm9000.c b/drivers/net/dm9000.c index d45bcd2..864295e 100644 --- a/drivers/net/dm9000.c +++ b/drivers/net/dm9000.c @@ -903,7 +903,7 @@ dm9000_stop(struct net_device *ndev) if (netif_msg_ifdown(db)) dev_dbg(db->dev, "shutting down %s\n", ndev->name); - cancel_delayed_work(&db->phy_poll); + cancel_delayed_work_sync(&db->phy_poll); netif_stop_queue(ndev); netif_carrier_off(ndev); -- cgit v0.10.2 From b166cfba01d62d04ae81ecce2d5dbe308db8083a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:14 -0700 Subject: pcnet32: fix warning pci_name() will be changed to return `const char *': drivers/net/pcnet32.c: In function 'pcnet32_probe1': drivers/net/pcnet32.c:1884: warning: passing argument 2 of 'pcnet32_alloc_ring' discards qualifiers from pointer target type Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/pcnet32.c b/drivers/net/pcnet32.c index a1c454d..1c89b97 100644 --- a/drivers/net/pcnet32.c +++ b/drivers/net/pcnet32.c @@ -325,7 +325,7 @@ static int pcnet32_get_regs_len(struct net_device *dev); static void pcnet32_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *ptr); static void pcnet32_purge_tx_ring(struct net_device *dev); -static int pcnet32_alloc_ring(struct net_device *dev, char *name); +static int pcnet32_alloc_ring(struct net_device *dev, const char *name); static void pcnet32_free_ring(struct net_device *dev); static void pcnet32_check_media(struct net_device *dev, int verbose); @@ -1983,7 +1983,7 @@ pcnet32_probe1(unsigned long ioaddr, int shared, struct pci_dev *pdev) } /* if any allocation fails, caller must also call pcnet32_free_ring */ -static int pcnet32_alloc_ring(struct net_device *dev, char *name) +static int pcnet32_alloc_ring(struct net_device *dev, const char *name) { struct pcnet32_private *lp = netdev_priv(dev); -- cgit v0.10.2 From 5d9bac8ece5e2a64a2a450c7e2d6901ed9152052 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:15 -0700 Subject: drivers/net/tokenring/3c359.c: squish a warning When dev_name() is changed to return `const char *': drivers/net/tokenring/3c359.c: In function 'xl_probe': drivers/net/tokenring/3c359.c:318: warning: assignment discards qualifiers from pointer target type Cc: Jeff Garzik Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/tokenring/3c359.h b/drivers/net/tokenring/3c359.h index b880cba..74cf8e1 100644 --- a/drivers/net/tokenring/3c359.h +++ b/drivers/net/tokenring/3c359.h @@ -264,7 +264,7 @@ struct xl_private { u16 asb; u8 __iomem *xl_mmio; - char *xl_card_name; + const char *xl_card_name; struct pci_dev *pdev ; spinlock_t xl_lock ; -- cgit v0.10.2 From 63dac8ff1b3709b5f7ba71283eb48b4e1f18d563 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 16:20:15 -0700 Subject: drivers/net/tokenring/olympic.c: fix warning When dev_name() is changed to return `const char *': drivers/net/tokenring/olympic.c: In function 'olympic_probe': drivers/net/tokenring/olympic.c:234: warning: assignment discards qualifiers from pointer target type Cc: Jeff Garzik Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/tokenring/olympic.h b/drivers/net/tokenring/olympic.h index c919563..10fbba0 100644 --- a/drivers/net/tokenring/olympic.h +++ b/drivers/net/tokenring/olympic.h @@ -254,7 +254,7 @@ struct olympic_private { u8 __iomem *olympic_mmio; u8 __iomem *olympic_lap; struct pci_dev *pdev ; - char *olympic_card_name ; + const char *olympic_card_name; spinlock_t olympic_lock ; -- cgit v0.10.2 From 74ef5c5025fed5ad6a1cbdfb5c2e831acdbbd2fe Mon Sep 17 00:00:00 2001 From: Pierre Ynard Date: Wed, 14 May 2008 16:20:16 -0700 Subject: rndis_host: increase delay in command response loop Some devices running some WinCE firmware (with SC_* Samsung processors according to the SynCE project, verified on a HTC P3600 device) fail to register because they apparently need extra time to respond correctly to requests. Increase the existing delay to satisfy them. Based on code from the SynCE project, on a suggestion of David Brownell. This patch Works For Me(tm). Signed-off-by: Pierre Ynard Acked-by: David Brownell Cc: Greg KH Cc: Jeff Garzik Cc: "David S. Miller" Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c index 21a7785..e1177cc 100644 --- a/drivers/net/usb/rndis_host.c +++ b/drivers/net/usb/rndis_host.c @@ -194,7 +194,7 @@ int rndis_command(struct usbnet *dev, struct rndis_msg_hdr *buf) dev_dbg(&info->control->dev, "rndis response error, code %d\n", retval); } - msleep(2); + msleep(20); } dev_dbg(&info->control->dev, "rndis response timeout\n"); return -ETIMEDOUT; -- cgit v0.10.2 From 7fb1c2ac8ecaf0883f2fcb38dfc9ec2d15cee11d Mon Sep 17 00:00:00 2001 From: Brian King Date: Wed, 14 May 2008 09:48:25 -0500 Subject: ehea: Fix use after free on reboot Fixes the following use after free oops: ehea: Reboot: freeing all eHEA resources Unable to handle kernel paging request for data at address 0x6b6b6b6b6b6b6c5b Faulting instruction address: 0xd000000000354488 cpu 0x0: Vector: 300 (Data Access) at [c00000002ec6f310] pc: d000000000354488: .ehea_shutdown_single_port+0x50/0x78 [ehea] lr: d00000000035447c: .ehea_shutdown_single_port+0x44/0x78 [ehea] sp: c00000002ec6f590 msr: 8000000000009032 dar: 6b6b6b6b6b6b6c5b dsisr: 40000000 current = 0xc0000000281412e0 paca = 0xc0000000006df300 pid = 10930, comm = reboot enter ? for help [c00000002ec6f590] d00000000035d64c .ehea_remove+0x44/0x124 [ehea] (unreliable) [c00000002ec6f630] c000000000319f88 .of_platform_device_remove+0x40/0x58 [c00000002ec6f6a0] c000000000291018 .__device_release_driver+0xb0/0xf0 [c00000002ec6f730] c000000000291120 .driver_detach+0xc8/0xfc [c00000002ec6f7c0] c00000000028fe24 .bus_remove_driver+0xb4/0x114 [c00000002ec6f850] c000000000291768 .driver_unregister+0x54/0x74 [c00000002ec6f8e0] c00000000031a0c8 .of_unregister_driver+0x14/0x28 [c00000002ec6f950] c000000000023ba0 .ibmebus_unregister_driver+0x10/0x24 [c00000002ec6f9c0] d000000000354180 .ehea_reboot_notifier+0x30/0x4c [ehea] [c00000002ec6fa40] c0000000003c95a8 .notifier_call_chain+0x5c/0xcc [c00000002ec6fae0] c000000000082cd4 .__blocking_notifier_call_chain+0x70/0xb0 [c00000002ec6fb90] c000000000075cf8 .kernel_restart_prepare+0x24/0x58 [c00000002ec6fc10] c000000000075f0c .kernel_restart+0x20/0x6c [c00000002ec6fc90] c000000000078674 .sys_reboot+0x1d4/0x290 [c00000002ec6fe30] c0000000000086ac syscall_exit+0x0/0x40 Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index d1b6d4e..8645224 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -3178,11 +3178,12 @@ out_err: static void ehea_shutdown_single_port(struct ehea_port *port) { + struct ehea_adapter *adapter = port->adapter; unregister_netdev(port->netdev); ehea_unregister_port(port); kfree(port->mc_list); free_netdev(port->netdev); - port->adapter->active_ports--; + adapter->active_ports--; } static int ehea_setup_ports(struct ehea_adapter *adapter) -- cgit v0.10.2 From 6941727a08d49c88a58bc3afb55044df7932549e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 13 May 2008 14:16:53 +0300 Subject: hamradio/scc: add missing block braces to multi-statement if MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Signed-off-by: Jeff Garzik diff --git a/drivers/net/hamradio/scc.c b/drivers/net/hamradio/scc.c index f905159..45ae9d1 100644 --- a/drivers/net/hamradio/scc.c +++ b/drivers/net/hamradio/scc.c @@ -1340,9 +1340,10 @@ static unsigned int scc_set_param(struct scc_channel *scc, unsigned int cmd, uns case PARAM_RTS: if ( !(scc->wreg[R5] & RTS) ) { - if (arg != TX_OFF) + if (arg != TX_OFF) { scc_key_trx(scc, TX_ON); scc_start_tx_timer(scc, t_txdelay, scc->kiss.txdelay); + } } else { if (arg == TX_OFF) { -- cgit v0.10.2 From 7ad62dbcb5766dae38516e0333a6f68a1b6df884 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Tue, 13 May 2008 14:16:54 +0300 Subject: s2io: add missing block braces to multistatement if statement MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Ilpo Järvinen Cc: Ramkrishna Vepa Cc: Rastapur Santosh Cc: Sivakumar Subramani Cc: Sreenivasa Honnur Signed-off-by: Jeff Garzik diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 523478e..0f3d230 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1113,9 +1113,10 @@ static int s2io_on_nec_bridge(struct pci_dev *s2io_pdev) struct pci_dev *tdev = NULL; while ((tdev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, tdev)) != NULL) { if (tdev->vendor == NEC_VENID && tdev->device == NEC_DEVID) { - if (tdev->bus == s2io_pdev->bus->parent) + if (tdev->bus == s2io_pdev->bus->parent) { pci_dev_put(tdev); return 1; + } } } return 0; -- cgit v0.10.2 From 0178ec3d3e4e48c63b350e712835a4a5c15c6c86 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 00:53:00 +0300 Subject: make myri10ge_get_firmware_capabilities() static This patch makes the needlessly global myri10ge_get_firmware_capabilities() static. Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index c91b12e..36be6ef 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -631,7 +631,7 @@ static int myri10ge_adopt_running_firmware(struct myri10ge_priv *mgp) return status; } -int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp) +static int myri10ge_get_firmware_capabilities(struct myri10ge_priv *mgp) { struct myri10ge_cmd cmd; int status; -- cgit v0.10.2 From aff26e2faa782e196f28b86d04b093fd3bae1ffb Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Mon, 19 May 2008 19:11:08 +0200 Subject: WAN: protect Cisco HDLC state changes with a spinlock. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof HaÅ‚asa Signed-off-by: Jeff Garzik diff --git a/drivers/net/wan/hdlc_cisco.c b/drivers/net/wan/hdlc_cisco.c index 7133c68..762d21c 100644 --- a/drivers/net/wan/hdlc_cisco.c +++ b/drivers/net/wan/hdlc_cisco.c @@ -56,6 +56,7 @@ struct cisco_state { cisco_proto settings; struct timer_list timer; + spinlock_t lock; unsigned long last_poll; int up; int request_sent; @@ -158,6 +159,7 @@ static int cisco_rx(struct sk_buff *skb) { struct net_device *dev = skb->dev; hdlc_device *hdlc = dev_to_hdlc(dev); + struct cisco_state *st = state(hdlc); struct hdlc_header *data = (struct hdlc_header*)skb->data; struct cisco_packet *cisco_data; struct in_device *in_dev; @@ -220,11 +222,12 @@ static int cisco_rx(struct sk_buff *skb) goto rx_error; case CISCO_KEEPALIVE_REQ: - state(hdlc)->rxseq = ntohl(cisco_data->par1); - if (state(hdlc)->request_sent && - ntohl(cisco_data->par2) == state(hdlc)->txseq) { - state(hdlc)->last_poll = jiffies; - if (!state(hdlc)->up) { + spin_lock(&st->lock); + st->rxseq = ntohl(cisco_data->par1); + if (st->request_sent && + ntohl(cisco_data->par2) == st->txseq) { + st->last_poll = jiffies; + if (!st->up) { u32 sec, min, hrs, days; sec = ntohl(cisco_data->time) / 1000; min = sec / 60; sec -= min * 60; @@ -232,12 +235,12 @@ static int cisco_rx(struct sk_buff *skb) days = hrs / 24; hrs -= days * 24; printk(KERN_INFO "%s: Link up (peer " "uptime %ud%uh%um%us)\n", - dev->name, days, hrs, - min, sec); + dev->name, days, hrs, min, sec); netif_dormant_off(dev); - state(hdlc)->up = 1; + st->up = 1; } } + spin_unlock(&st->lock); dev_kfree_skb_any(skb); return NET_RX_SUCCESS; @@ -261,24 +264,25 @@ static void cisco_timer(unsigned long arg) { struct net_device *dev = (struct net_device *)arg; hdlc_device *hdlc = dev_to_hdlc(dev); + struct cisco_state *st = state(hdlc); - if (state(hdlc)->up && - time_after(jiffies, state(hdlc)->last_poll + - state(hdlc)->settings.timeout * HZ)) { - state(hdlc)->up = 0; + spin_lock(&st->lock); + if (st->up && + time_after(jiffies, st->last_poll + st->settings.timeout * HZ)) { + st->up = 0; printk(KERN_INFO "%s: Link down\n", dev->name); netif_dormant_on(dev); } - cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, - htonl(++state(hdlc)->txseq), - htonl(state(hdlc)->rxseq)); - state(hdlc)->request_sent = 1; - state(hdlc)->timer.expires = jiffies + - state(hdlc)->settings.interval * HZ; - state(hdlc)->timer.function = cisco_timer; - state(hdlc)->timer.data = arg; - add_timer(&state(hdlc)->timer); + cisco_keepalive_send(dev, CISCO_KEEPALIVE_REQ, htonl(++st->txseq), + htonl(st->rxseq)); + st->request_sent = 1; + spin_unlock(&st->lock); + + st->timer.expires = jiffies + st->settings.interval * HZ; + st->timer.function = cisco_timer; + st->timer.data = arg; + add_timer(&st->timer); } @@ -286,15 +290,20 @@ static void cisco_timer(unsigned long arg) static void cisco_start(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - state(hdlc)->up = 0; - state(hdlc)->request_sent = 0; - state(hdlc)->txseq = state(hdlc)->rxseq = 0; - - init_timer(&state(hdlc)->timer); - state(hdlc)->timer.expires = jiffies + HZ; /*First poll after 1s*/ - state(hdlc)->timer.function = cisco_timer; - state(hdlc)->timer.data = (unsigned long)dev; - add_timer(&state(hdlc)->timer); + struct cisco_state *st = state(hdlc); + unsigned long flags; + + spin_lock_irqsave(&st->lock, flags); + st->up = 0; + st->request_sent = 0; + st->txseq = st->rxseq = 0; + spin_unlock_irqrestore(&st->lock, flags); + + init_timer(&st->timer); + st->timer.expires = jiffies + HZ; /* First poll after 1 s */ + st->timer.function = cisco_timer; + st->timer.data = (unsigned long)dev; + add_timer(&st->timer); } @@ -302,10 +311,16 @@ static void cisco_start(struct net_device *dev) static void cisco_stop(struct net_device *dev) { hdlc_device *hdlc = dev_to_hdlc(dev); - del_timer_sync(&state(hdlc)->timer); + struct cisco_state *st = state(hdlc); + unsigned long flags; + + del_timer_sync(&st->timer); + + spin_lock_irqsave(&st->lock, flags); netif_dormant_on(dev); - state(hdlc)->up = 0; - state(hdlc)->request_sent = 0; + st->up = 0; + st->request_sent = 0; + spin_unlock_irqrestore(&st->lock, flags); } @@ -367,6 +382,7 @@ static int cisco_ioctl(struct net_device *dev, struct ifreq *ifr) return result; memcpy(&state(hdlc)->settings, &new_settings, size); + spin_lock_init(&state(hdlc)->lock); dev->hard_start_xmit = hdlc->xmit; dev->header_ops = &cisco_header_ops; dev->type = ARPHRD_CISCO; -- cgit v0.10.2 From 40ba182e3ca9f019f299ce5052fcd7e4cf68d11b Mon Sep 17 00:00:00 2001 From: Tobias Diedrich Date: Sun, 18 May 2008 15:00:36 +0200 Subject: [netdrvr] forcedeth: Restore multicast settings on resume nv_open() resets multicast settings, call nv_set_multicast(dev) to restore them. (Maybe this should rather be moved into nv_open()) Signed-off-by: Tobias Diedrich Signed-off-by: Jeff Garzik diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 35f66d4..9eca97f 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -5823,6 +5823,7 @@ static int nv_resume(struct pci_dev *pdev) writel(txreg, base + NvRegTransmitPoll); rc = nv_open(dev); + nv_set_multicast(dev); out: return rc; } -- cgit v0.10.2 From 789585e968f07653a29a9e829aed20386043636c Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sun, 18 May 2008 04:45:09 +0100 Subject: sb1250: use netdev_alloc_skb Use netdev_alloc_skb. This sets skb->dev and allows arch specific allocation. Also simplify and cleanup the alignment code. Signed-off-by: Stephen Hemminger Signed-off-by: Maciej W. Rozycki Signed-off-by: Jeff Garzik diff --git a/drivers/net/sb1250-mac.c b/drivers/net/sb1250-mac.c index 888b7de..33bb18f 100644 --- a/drivers/net/sb1250-mac.c +++ b/drivers/net/sb1250-mac.c @@ -179,8 +179,7 @@ enum sbmac_state { #define SBMAC_MAX_TXDESCR 256 #define SBMAC_MAX_RXDESCR 256 -#define ETHER_ALIGN 2 -#define ETHER_ADDR_LEN 6 +#define ETHER_ADDR_LEN 6 #define ENET_PACKET_SIZE 1518 /*#define ENET_PACKET_SIZE 9216 */ @@ -262,8 +261,6 @@ struct sbmac_softc { spinlock_t sbm_lock; /* spin lock */ int sbm_devflags; /* current device flags */ - int sbm_buffersize; - /* * Controller-specific things */ @@ -305,10 +302,11 @@ struct sbmac_softc { static void sbdma_initctx(struct sbmacdma *d, struct sbmac_softc *s, int chan, int txrx, int maxdescr); static void sbdma_channel_start(struct sbmacdma *d, int rxtx); -static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *m); +static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, + struct sk_buff *m); static int sbdma_add_txbuffer(struct sbmacdma *d, struct sk_buff *m); static void sbdma_emptyring(struct sbmacdma *d); -static void sbdma_fillring(struct sbmacdma *d); +static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d); static int sbdma_rx_process(struct sbmac_softc *sc, struct sbmacdma *d, int work_to_do, int poll); static void sbdma_tx_process(struct sbmac_softc *sc, struct sbmacdma *d, @@ -777,16 +775,13 @@ static void sbdma_channel_stop(struct sbmacdma *d) d->sbdma_remptr = NULL; } -static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) +static inline void sbdma_align_skb(struct sk_buff *skb, + unsigned int power2, unsigned int offset) { - unsigned long addr; - unsigned long newaddr; - - addr = (unsigned long) skb->data; - - newaddr = (addr + power2 - 1) & ~(power2 - 1); + unsigned char *addr = skb->data; + unsigned char *newaddr = PTR_ALIGN(addr, power2); - skb_reserve(skb,newaddr-addr+offset); + skb_reserve(skb, newaddr - addr + offset); } @@ -797,7 +792,8 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) * this queues a buffer for inbound packets. * * Input parameters: - * d - DMA channel descriptor + * sc - softc structure + * d - DMA channel descriptor * sb - sk_buff to add, or NULL if we should allocate one * * Return value: @@ -806,8 +802,10 @@ static void sbdma_align_skb(struct sk_buff *skb,int power2,int offset) ********************************************************************* */ -static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb) +static int sbdma_add_rcvbuffer(struct sbmac_softc *sc, struct sbmacdma *d, + struct sk_buff *sb) { + struct net_device *dev = sc->sbm_dev; struct sbdmadscr *dsc; struct sbdmadscr *nextdsc; struct sk_buff *sb_new = NULL; @@ -848,14 +846,16 @@ static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb) */ if (sb == NULL) { - sb_new = dev_alloc_skb(ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN); + sb_new = netdev_alloc_skb(dev, ENET_PACKET_SIZE + + SMP_CACHE_BYTES * 2 + + NET_IP_ALIGN); if (sb_new == NULL) { pr_info("%s: sk_buff allocation failed\n", d->sbdma_eth->sbm_dev->name); return -ENOBUFS; } - sbdma_align_skb(sb_new, SMP_CACHE_BYTES, ETHER_ALIGN); + sbdma_align_skb(sb_new, SMP_CACHE_BYTES, NET_IP_ALIGN); } else { sb_new = sb; @@ -874,10 +874,10 @@ static int sbdma_add_rcvbuffer(struct sbmacdma *d, struct sk_buff *sb) * Do not interrupt per DMA transfer. */ dsc->dscr_a = virt_to_phys(sb_new->data) | - V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | 0; + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | 0; #else dsc->dscr_a = virt_to_phys(sb_new->data) | - V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize+ETHER_ALIGN)) | + V_DMA_DSCRA_A_SIZE(NUMCACHEBLKS(pktsize + NET_IP_ALIGN)) | M_DMA_DSCRA_INTERRUPT; #endif @@ -1032,18 +1032,19 @@ static void sbdma_emptyring(struct sbmacdma *d) * with sk_buffs * * Input parameters: - * d - DMA channel + * sc - softc structure + * d - DMA channel * * Return value: * nothing ********************************************************************* */ -static void sbdma_fillring(struct sbmacdma *d) +static void sbdma_fillring(struct sbmac_softc *sc, struct sbmacdma *d) { int idx; - for (idx = 0; idx < SBMAC_MAX_RXDESCR-1; idx++) { - if (sbdma_add_rcvbuffer(d,NULL) != 0) + for (idx = 0; idx < SBMAC_MAX_RXDESCR - 1; idx++) { + if (sbdma_add_rcvbuffer(sc, d, NULL) != 0) break; } } @@ -1159,10 +1160,11 @@ again: * packet and put it right back on the receive ring. */ - if (unlikely (sbdma_add_rcvbuffer(d,NULL) == - -ENOBUFS)) { + if (unlikely(sbdma_add_rcvbuffer(sc, d, NULL) == + -ENOBUFS)) { dev->stats.rx_dropped++; - sbdma_add_rcvbuffer(d,sb); /* re-add old buffer */ + /* Re-add old buffer */ + sbdma_add_rcvbuffer(sc, d, sb); /* No point in continuing at the moment */ printk(KERN_ERR "dropped packet (1)\n"); d->sbdma_remptr = SBDMA_NEXTBUF(d,sbdma_remptr); @@ -1212,7 +1214,7 @@ again: * put it back on the receive ring. */ dev->stats.rx_errors++; - sbdma_add_rcvbuffer(d,sb); + sbdma_add_rcvbuffer(sc, d, sb); } @@ -1570,7 +1572,7 @@ static void sbmac_channel_start(struct sbmac_softc *s) * Fill the receive ring */ - sbdma_fillring(&(s->sbm_rxdma)); + sbdma_fillring(s, &(s->sbm_rxdma)); /* * Turn on the rest of the bits in the enable register @@ -2312,13 +2314,6 @@ static int sbmac_init(struct platform_device *pldev, long long base) dev->dev_addr[i] = eaddr[i]; } - - /* - * Init packet size - */ - - sc->sbm_buffersize = ENET_PACKET_SIZE + SMP_CACHE_BYTES * 2 + ETHER_ALIGN; - /* * Initialize context (get pointers to registers and stuff), then * allocate the memory for the descriptor tables. -- cgit v0.10.2 From 5a0a92e67b5009a71e011658da04fb92dad8961f Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Sat, 17 May 2008 08:35:36 +0100 Subject: [SC92031] Using padto turned driver into an IPv6-only interface IPv4 would work with this driver only with static arp table entries, the patch reverts a padto introduced in commit 26a17b7bbb36a8552d531bc1ad08472fb5aa3007 sc92031: start transmit return value bugfix The padto does not work because the driver code evaluates `len' later on and there are cases where skb->len is not updated accordingly. This was observed with ARP frames (skb->len = 42 bytes, !skb_cloned(), skb_tailroom = 84 bytes). Then in skb_pad(), the first condition is true, where skb->len is not updated. As a consequence, the driver uses 42 bytes instead of the 60 bytes, and the ARP frame never makes it onto the wire. Signed-off-by: Gerrit Renker Signed-off-by: Jeff Garzik diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c index f64a860..b4b6380 100644 --- a/drivers/net/sc92031.c +++ b/drivers/net/sc92031.c @@ -953,9 +953,6 @@ static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev) unsigned entry; u32 tx_status; - if (skb_padto(skb, ETH_ZLEN)) - return NETDEV_TX_OK; - if (unlikely(skb->len > TX_BUF_SIZE)) { dev->stats.tx_dropped++; goto out; @@ -975,6 +972,11 @@ static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE); len = skb->len; + if (unlikely(len < ETH_ZLEN)) { + memset(priv->tx_bufs + entry * TX_BUF_SIZE + len, + 0, ETH_ZLEN - len); + len = ETH_ZLEN; + } wmb(); -- cgit v0.10.2 From 940608be2e6117c17c19b203f7393ced4d02590a Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Sat, 17 May 2008 07:07:36 +0100 Subject: PHYLIB: Kconfig: Fix the dependency on S390 PHYLIB was first marked as BROKEN on S390, then the enclosing menu marked as non-S390, then the two dependencies merged with the conversion to menuconfig. Reduce to non-S390. Signed-off-by: Maciej W. Rozycki Signed-off-by: Jeff Garzik diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 6bf9e76..6eb2d31 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -5,7 +5,7 @@ menuconfig PHYLIB tristate "PHY Device support and infrastructure" depends on !S390 - depends on NET_ETHERNET && (BROKEN || !S390) + depends on NET_ETHERNET help Ethernet controllers are usually attached to PHY devices. This option provides infrastructure for -- cgit v0.10.2 From 7f80202bb964dd9c5b408af8100c7f0fd39a15c7 Mon Sep 17 00:00:00 2001 From: Andy Fleming Date: Thu, 15 May 2008 17:00:21 -0500 Subject: ucc_geth: Fix arguments to dma map/unmap functions We were passing NULL as the device. When we actually start supporting more interesting memory configurations, this will break things, so we proactively are fixing the bug. Signed-off-by: Andy Fleming Signed-off-by: Jeff Garzik diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c index ca0bdac..fb0b918 100644 --- a/drivers/net/ucc_geth.c +++ b/drivers/net/ucc_geth.c @@ -237,7 +237,7 @@ static struct sk_buff *get_new_skb(struct ucc_geth_private *ugeth, skb->dev = ugeth->dev; out_be32(&((struct qe_bd __iomem *)bd)->buf, - dma_map_single(NULL, + dma_map_single(&ugeth->dev->dev, skb->data, ugeth->ug_info->uf_info.max_rx_buf_length + UCC_GETH_RX_DATA_BUF_ALIGNMENT, @@ -2158,7 +2158,7 @@ static void ucc_geth_memclean(struct ucc_geth_private *ugeth) continue; for (j = 0; j < ugeth->ug_info->bdRingLenTx[i]; j++) { if (ugeth->tx_skbuff[i][j]) { - dma_unmap_single(NULL, + dma_unmap_single(&ugeth->dev->dev, in_be32(&((struct qe_bd __iomem *)bd)->buf), (in_be32((u32 __iomem *)bd) & BD_LENGTH_MASK), @@ -2186,7 +2186,7 @@ static void ucc_geth_memclean(struct ucc_geth_private *ugeth) bd = ugeth->p_rx_bd_ring[i]; for (j = 0; j < ugeth->ug_info->bdRingLenRx[i]; j++) { if (ugeth->rx_skbuff[i][j]) { - dma_unmap_single(NULL, + dma_unmap_single(&ugeth->dev->dev, in_be32(&((struct qe_bd __iomem *)bd)->buf), ugeth->ug_info-> uf_info.max_rx_buf_length + @@ -3406,7 +3406,8 @@ static int ucc_geth_start_xmit(struct sk_buff *skb, struct net_device *dev) /* set up the buffer descriptor */ out_be32(&((struct qe_bd __iomem *)bd)->buf, - dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE)); + dma_map_single(&ugeth->dev->dev, skb->data, + skb->len, DMA_TO_DEVICE)); /* printk(KERN_DEBUG"skb->data is 0x%x\n",skb->data); */ -- cgit v0.10.2 From 7fa0cba330af3a24f43ac85e14b0b5fed557cdab Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 16 May 2008 23:04:51 +0400 Subject: uli526x: add support for netpoll This patch adds netpoll support for the uli526x ethernet driver -- simply call the interrupt handler for polling. To do this without disable_irq()/enable_irq() pair we should fully protect the handler. Luckily, it's already using irqsave spinlock, the only unprotected place is interrupts re-enabling write. It was safe to re-enable interrupts without holding the spinlock, but with netpoll possibility now it doesn't seem so. Patch was tested using netconsole and KGDBoE. Signed-off-by: Anton Vorontsov Signed-off-by: Jeff Garzik diff --git a/drivers/net/tulip/uli526x.c b/drivers/net/tulip/uli526x.c index 2511ca7..e9e62862 100644 --- a/drivers/net/tulip/uli526x.c +++ b/drivers/net/tulip/uli526x.c @@ -225,6 +225,9 @@ static void uli526x_set_filter_mode(struct net_device *); static const struct ethtool_ops netdev_ethtool_ops; static u16 read_srom_word(long, int); static irqreturn_t uli526x_interrupt(int, void *); +#ifdef CONFIG_NET_POLL_CONTROLLER +static void uli526x_poll(struct net_device *dev); +#endif static void uli526x_descriptor_init(struct uli526x_board_info *, unsigned long); static void allocate_rx_buffer(struct uli526x_board_info *); static void update_cr6(u32, unsigned long); @@ -339,6 +342,9 @@ static int __devinit uli526x_init_one (struct pci_dev *pdev, dev->get_stats = &uli526x_get_stats; dev->set_multicast_list = &uli526x_set_filter_mode; dev->ethtool_ops = &netdev_ethtool_ops; +#ifdef CONFIG_NET_POLL_CONTROLLER + dev->poll_controller = &uli526x_poll; +#endif spin_lock_init(&db->lock); @@ -681,8 +687,9 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id) db->cr5_data = inl(ioaddr + DCR5); outl(db->cr5_data, ioaddr + DCR5); if ( !(db->cr5_data & 0x180c1) ) { - spin_unlock_irqrestore(&db->lock, flags); + /* Restore CR7 to enable interrupt mask */ outl(db->cr7_data, ioaddr + DCR7); + spin_unlock_irqrestore(&db->lock, flags); return IRQ_HANDLED; } @@ -715,6 +722,13 @@ static irqreturn_t uli526x_interrupt(int irq, void *dev_id) return IRQ_HANDLED; } +#ifdef CONFIG_NET_POLL_CONTROLLER +static void uli526x_poll(struct net_device *dev) +{ + /* ISR grabs the irqsave lock, so this should be safe */ + uli526x_interrupt(dev->irq, dev); +} +#endif /* * Free TX resource after TX complete -- cgit v0.10.2 From 3d60efb55f634e200fd99e0960a8e099fb38446a Mon Sep 17 00:00:00 2001 From: Aurelien Nephtali Date: Wed, 14 May 2008 17:04:13 -0700 Subject: net/usb: add support for Apple USB Ethernet Adapter Add support for Apple USB Ethernet Adapter. http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?nplm=MB442Z/A Signed-off-by: Aurelien Nephtali Acked-by: Greg KH Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/usb/asix.c b/drivers/net/usb/asix.c index dc6f097..37ecf84 100644 --- a/drivers/net/usb/asix.c +++ b/drivers/net/usb/asix.c @@ -1440,6 +1440,10 @@ static const struct usb_device_id products [] = { // Belkin F5D5055 USB_DEVICE(0x050d, 0x5055), .driver_info = (unsigned long) &ax88178_info, +}, { + // Apple USB Ethernet Adapter + USB_DEVICE(0x05ac, 0x1402), + .driver_info = (unsigned long) &ax88772_info, }, { }, // END }; -- cgit v0.10.2 From f47e81fc36371a2f5e2b9792b6a8c56a4564ebbe Mon Sep 17 00:00:00 2001 From: Becky Bruce Date: Thu, 1 May 2008 18:03:11 -0500 Subject: e1000e: use resource_size_t, not unsigned long, for phys addrs The use of unsigned long causes the driver to fail on 32-bit systems which support 64-bit resources. Signed-off-by: Becky Bruce Signed-off-by: Jeff Garzik diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 8cbb40f..cab1835 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -4201,8 +4201,8 @@ static int __devinit e1000_probe(struct pci_dev *pdev, struct e1000_adapter *adapter; struct e1000_hw *hw; const struct e1000_info *ei = e1000_info_tbl[ent->driver_data]; - unsigned long mmio_start, mmio_len; - unsigned long flash_start, flash_len; + resource_size_t mmio_start, mmio_len; + resource_size_t flash_start, flash_len; static int cards_found; int i, err, pci_using_dac; -- cgit v0.10.2 From f917d58031fce6dfd7cea71259ea6a2b663ec813 Mon Sep 17 00:00:00 2001 From: Matteo Croce Date: Wed, 14 May 2008 00:58:32 +0200 Subject: cpmac bugfixes and enhancements * Resolve some locking issues using atomic_inc/atomic_dec * move status code in cpmac_check_status * unmark the BROKEN flag in Kconfig * move code which should have been in platform code in arch/mips/ar7/platform.c * fixed an IRQ storm which lets the kernel hang * fixed a double call to netif_start_queue which causes a kernel panic * don't fail to register the PHY, works on many devices now Signed-off-by: Matteo Croce Signed-off-by: Felix Fietkau Signed-off-by: Jeff Garzik diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 2b5740b..7f3f62e 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -38,6 +38,7 @@ #include #include #include +#include MODULE_AUTHOR("Eugene Konev "); MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)"); @@ -187,6 +188,7 @@ struct cpmac_desc { #define CPMAC_EOQ 0x1000 struct sk_buff *skb; struct cpmac_desc *next; + struct cpmac_desc *prev; dma_addr_t mapping; dma_addr_t data_mapping; }; @@ -208,6 +210,7 @@ struct cpmac_priv { struct work_struct reset_work; struct platform_device *pdev; struct napi_struct napi; + atomic_t reset_pending; }; static irqreturn_t cpmac_irq(int, void *); @@ -241,6 +244,16 @@ static void cpmac_dump_desc(struct net_device *dev, struct cpmac_desc *desc) printk("\n"); } +static void cpmac_dump_all_desc(struct net_device *dev) +{ + struct cpmac_priv *priv = netdev_priv(dev); + struct cpmac_desc *dump = priv->rx_head; + do { + cpmac_dump_desc(dev, dump); + dump = dump->next; + } while (dump != priv->rx_head); +} + static void cpmac_dump_skb(struct net_device *dev, struct sk_buff *skb) { int i; @@ -412,21 +425,42 @@ static struct sk_buff *cpmac_rx_one(struct cpmac_priv *priv, static int cpmac_poll(struct napi_struct *napi, int budget) { struct sk_buff *skb; - struct cpmac_desc *desc; - int received = 0; + struct cpmac_desc *desc, *restart; struct cpmac_priv *priv = container_of(napi, struct cpmac_priv, napi); + int received = 0, processed = 0; spin_lock(&priv->rx_lock); if (unlikely(!priv->rx_head)) { if (netif_msg_rx_err(priv) && net_ratelimit()) printk(KERN_WARNING "%s: rx: polling, but no queue\n", priv->dev->name); + spin_unlock(&priv->rx_lock); netif_rx_complete(priv->dev, napi); return 0; } desc = priv->rx_head; + restart = NULL; while (((desc->dataflags & CPMAC_OWN) == 0) && (received < budget)) { + processed++; + + if ((desc->dataflags & CPMAC_EOQ) != 0) { + /* The last update to eoq->hw_next didn't happen + * soon enough, and the receiver stopped here. + *Remember this descriptor so we can restart + * the receiver after freeing some space. + */ + if (unlikely(restart)) { + if (netif_msg_rx_err(priv)) + printk(KERN_ERR "%s: poll found a" + " duplicate EOQ: %p and %p\n", + priv->dev->name, restart, desc); + goto fatal_error; + } + + restart = desc->next; + } + skb = cpmac_rx_one(priv, desc); if (likely(skb)) { netif_receive_skb(skb); @@ -435,19 +469,90 @@ static int cpmac_poll(struct napi_struct *napi, int budget) desc = desc->next; } + if (desc != priv->rx_head) { + /* We freed some buffers, but not the whole ring, + * add what we did free to the rx list */ + desc->prev->hw_next = (u32)0; + priv->rx_head->prev->hw_next = priv->rx_head->mapping; + } + + /* Optimization: If we did not actually process an EOQ (perhaps because + * of quota limits), check to see if the tail of the queue has EOQ set. + * We should immediately restart in that case so that the receiver can + * restart and run in parallel with more packet processing. + * This lets us handle slightly larger bursts before running + * out of ring space (assuming dev->weight < ring_size) */ + + if (!restart && + (priv->rx_head->prev->dataflags & (CPMAC_OWN|CPMAC_EOQ)) + == CPMAC_EOQ && + (priv->rx_head->dataflags & CPMAC_OWN) != 0) { + /* reset EOQ so the poll loop (above) doesn't try to + * restart this when it eventually gets to this descriptor. + */ + priv->rx_head->prev->dataflags &= ~CPMAC_EOQ; + restart = priv->rx_head; + } + + if (restart) { + priv->dev->stats.rx_errors++; + priv->dev->stats.rx_fifo_errors++; + if (netif_msg_rx_err(priv) && net_ratelimit()) + printk(KERN_WARNING "%s: rx dma ring overrun\n", + priv->dev->name); + + if (unlikely((restart->dataflags & CPMAC_OWN) == 0)) { + if (netif_msg_drv(priv)) + printk(KERN_ERR "%s: cpmac_poll is trying to " + "restart rx from a descriptor that's " + "not free: %p\n", + priv->dev->name, restart); + goto fatal_error; + } + + cpmac_write(priv->regs, CPMAC_RX_PTR(0), restart->mapping); + } + priv->rx_head = desc; spin_unlock(&priv->rx_lock); if (unlikely(netif_msg_rx_status(priv))) printk(KERN_DEBUG "%s: poll processed %d packets\n", priv->dev->name, received); - if (desc->dataflags & CPMAC_OWN) { + if (processed == 0) { + /* we ran out of packets to read, + * revert to interrupt-driven mode */ netif_rx_complete(priv->dev, napi); - cpmac_write(priv->regs, CPMAC_RX_PTR(0), (u32)desc->mapping); cpmac_write(priv->regs, CPMAC_RX_INT_ENABLE, 1); return 0; } return 1; + +fatal_error: + /* Something went horribly wrong. + * Reset hardware to try to recover rather than wedging. */ + + if (netif_msg_drv(priv)) { + printk(KERN_ERR "%s: cpmac_poll is confused. " + "Resetting hardware\n", priv->dev->name); + cpmac_dump_all_desc(priv->dev); + printk(KERN_DEBUG "%s: RX_PTR(0)=0x%08x RX_ACK(0)=0x%08x\n", + priv->dev->name, + cpmac_read(priv->regs, CPMAC_RX_PTR(0)), + cpmac_read(priv->regs, CPMAC_RX_ACK(0))); + } + + spin_unlock(&priv->rx_lock); + netif_rx_complete(priv->dev, napi); + netif_stop_queue(priv->dev); + napi_disable(&priv->napi); + + atomic_inc(&priv->reset_pending); + cpmac_hw_stop(priv->dev); + if (!schedule_work(&priv->reset_work)) + atomic_dec(&priv->reset_pending); + return 0; + } static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) @@ -456,6 +561,9 @@ static int cpmac_start_xmit(struct sk_buff *skb, struct net_device *dev) struct cpmac_desc *desc; struct cpmac_priv *priv = netdev_priv(dev); + if (unlikely(atomic_read(&priv->reset_pending))) + return NETDEV_TX_BUSY; + if (unlikely(skb_padto(skb, ETH_ZLEN))) return NETDEV_TX_OK; @@ -621,8 +729,10 @@ static void cpmac_clear_rx(struct net_device *dev) desc->dataflags = CPMAC_OWN; dev->stats.rx_dropped++; } + desc->hw_next = desc->next->mapping; desc = desc->next; } + priv->rx_head->prev->hw_next = 0; } static void cpmac_clear_tx(struct net_device *dev) @@ -635,14 +745,14 @@ static void cpmac_clear_tx(struct net_device *dev) priv->desc_ring[i].dataflags = 0; if (priv->desc_ring[i].skb) { dev_kfree_skb_any(priv->desc_ring[i].skb); - if (netif_subqueue_stopped(dev, i)) - netif_wake_subqueue(dev, i); + priv->desc_ring[i].skb = NULL; } } } static void cpmac_hw_error(struct work_struct *work) { + int i; struct cpmac_priv *priv = container_of(work, struct cpmac_priv, reset_work); @@ -651,8 +761,48 @@ static void cpmac_hw_error(struct work_struct *work) spin_unlock(&priv->rx_lock); cpmac_clear_tx(priv->dev); cpmac_hw_start(priv->dev); - napi_enable(&priv->napi); - netif_start_queue(priv->dev); + barrier(); + atomic_dec(&priv->reset_pending); + + for (i = 0; i < CPMAC_QUEUES; i++) + netif_wake_subqueue(priv->dev, i); + netif_wake_queue(priv->dev); + cpmac_write(priv->regs, CPMAC_MAC_INT_ENABLE, 3); +} + +static void cpmac_check_status(struct net_device *dev) +{ + struct cpmac_priv *priv = netdev_priv(dev); + + u32 macstatus = cpmac_read(priv->regs, CPMAC_MAC_STATUS); + int rx_channel = (macstatus >> 8) & 7; + int rx_code = (macstatus >> 12) & 15; + int tx_channel = (macstatus >> 16) & 7; + int tx_code = (macstatus >> 20) & 15; + + if (rx_code || tx_code) { + if (netif_msg_drv(priv) && net_ratelimit()) { + /* Can't find any documentation on what these + *error codes actually are. So just log them and hope.. + */ + if (rx_code) + printk(KERN_WARNING "%s: host error %d on rx " + "channel %d (macstatus %08x), resetting\n", + dev->name, rx_code, rx_channel, macstatus); + if (tx_code) + printk(KERN_WARNING "%s: host error %d on tx " + "channel %d (macstatus %08x), resetting\n", + dev->name, tx_code, tx_channel, macstatus); + } + + netif_stop_queue(dev); + cpmac_hw_stop(dev); + if (schedule_work(&priv->reset_work)) + atomic_inc(&priv->reset_pending); + if (unlikely(netif_msg_hw(priv))) + cpmac_dump_regs(dev); + } + cpmac_write(priv->regs, CPMAC_MAC_INT_CLEAR, 0xff); } static irqreturn_t cpmac_irq(int irq, void *dev_id) @@ -683,49 +833,32 @@ static irqreturn_t cpmac_irq(int irq, void *dev_id) cpmac_write(priv->regs, CPMAC_MAC_EOI_VECTOR, 0); - if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) { - if (netif_msg_drv(priv) && net_ratelimit()) - printk(KERN_ERR "%s: hw error, resetting...\n", - dev->name); - netif_stop_queue(dev); - napi_disable(&priv->napi); - cpmac_hw_stop(dev); - schedule_work(&priv->reset_work); - if (unlikely(netif_msg_hw(priv))) - cpmac_dump_regs(dev); - } + if (unlikely(status & (MAC_INT_HOST | MAC_INT_STATUS))) + cpmac_check_status(dev); return IRQ_HANDLED; } static void cpmac_tx_timeout(struct net_device *dev) { - struct cpmac_priv *priv = netdev_priv(dev); int i; + struct cpmac_priv *priv = netdev_priv(dev); spin_lock(&priv->lock); dev->stats.tx_errors++; spin_unlock(&priv->lock); if (netif_msg_tx_err(priv) && net_ratelimit()) printk(KERN_WARNING "%s: transmit timeout\n", dev->name); - /* - * FIXME: waking up random queue is not the best thing to - * do... on the other hand why we got here at all? - */ -#ifdef CONFIG_NETDEVICES_MULTIQUEUE + + atomic_inc(&priv->reset_pending); + barrier(); + cpmac_clear_tx(dev); + barrier(); + atomic_dec(&priv->reset_pending); + + netif_wake_queue(priv->dev); for (i = 0; i < CPMAC_QUEUES; i++) - if (priv->desc_ring[i].skb) { - priv->desc_ring[i].dataflags = 0; - dev_kfree_skb_any(priv->desc_ring[i].skb); - netif_wake_subqueue(dev, i); - break; - } -#else - priv->desc_ring[0].dataflags = 0; - if (priv->desc_ring[0].skb) - dev_kfree_skb_any(priv->desc_ring[0].skb); - netif_wake_queue(dev); -#endif + netif_wake_subqueue(dev, i); } static int cpmac_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd) @@ -901,9 +1034,12 @@ static int cpmac_open(struct net_device *dev) desc->buflen = CPMAC_SKB_SIZE; desc->dataflags = CPMAC_OWN; desc->next = &priv->rx_head[(i + 1) % priv->ring_size]; + desc->next->prev = desc; desc->hw_next = (u32)desc->next->mapping; } + priv->rx_head->prev->hw_next = (u32)0; + if ((res = request_irq(dev->irq, cpmac_irq, IRQF_SHARED, dev->name, dev))) { if (netif_msg_drv(priv)) @@ -912,6 +1048,7 @@ static int cpmac_open(struct net_device *dev) goto fail_irq; } + atomic_set(&priv->reset_pending, 0); INIT_WORK(&priv->reset_work, cpmac_hw_error); cpmac_hw_start(dev); @@ -1007,21 +1144,10 @@ static int __devinit cpmac_probe(struct platform_device *pdev) if (phy_id == PHY_MAX_ADDR) { if (external_switch || dumb_switch) { - struct fixed_phy_status status = {}; - - /* - * FIXME: this should be in the platform code! - * Since there is not platform code at all (that is, - * no mainline users of that driver), place it here - * for now. - */ - phy_id = 0; - status.link = 1; - status.duplex = 1; - status.speed = 100; - fixed_phy_add(PHY_POLL, phy_id, &status); + mdio_bus_id = 0; /* fixed phys bus */ + phy_id = pdev->id; } else { - printk(KERN_ERR "cpmac: no PHY present\n"); + dev_err(&pdev->dev, "no PHY present\n"); return -ENODEV; } } @@ -1064,10 +1190,8 @@ static int __devinit cpmac_probe(struct platform_device *pdev) priv->msg_enable = netif_msg_init(debug_level, 0xff); memcpy(dev->dev_addr, pdata->dev_addr, sizeof(dev->dev_addr)); - snprintf(priv->phy_name, BUS_ID_SIZE, PHY_ID_FMT, mdio_bus_id, phy_id); - - priv->phy = phy_connect(dev, priv->phy_name, &cpmac_adjust_link, 0, - PHY_INTERFACE_MODE_MII); + priv->phy = phy_connect(dev, cpmac_mii.phy_map[phy_id]->dev.bus_id, + &cpmac_adjust_link, 0, PHY_INTERFACE_MODE_MII); if (IS_ERR(priv->phy)) { if (netif_msg_drv(priv)) printk(KERN_ERR "%s: Could not attach to PHY\n", -- cgit v0.10.2 From 94a47f4161798c34bec7718768f72cf16bcfb4f0 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Mon, 12 May 2008 12:14:04 +0800 Subject: Blackfin EMAC Driver: Removed duplicated include Signed-off-by: Huang Weiyi Signed-off-by: Bryan Wu Signed-off-by: Jeff Garzik diff --git a/drivers/net/bfin_mac.c b/drivers/net/bfin_mac.c index 89c0018..4144343 100644 --- a/drivers/net/bfin_mac.c +++ b/drivers/net/bfin_mac.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From d04455fba3777fa5c3963348be76510169bbf4df Mon Sep 17 00:00:00 2001 From: Francois Romieu Date: Mon, 12 May 2008 18:44:21 +0200 Subject: au1000_eth: remove useless check The lifespan of the device covers the request_irq .. free_irq interval. The cast of a void * pointer is not needed either. Signed-off-by: Francois Romieu Signed-off-by: Jeff Garzik diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 3634b5f..7023d77 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -1239,12 +1239,7 @@ static int au1000_rx(struct net_device *dev) */ static irqreturn_t au1000_interrupt(int irq, void *dev_id) { - struct net_device *dev = (struct net_device *) dev_id; - - if (dev == NULL) { - printk(KERN_ERR "%s: isr: null dev ptr\n", dev->name); - return IRQ_RETVAL(1); - } + struct net_device *dev = dev_id; /* Handle RX interrupts first to minimize chance of overrun */ -- cgit v0.10.2 From 25c16fffa8ed82d3ef31980d76ff95d3c6430f00 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Mon, 12 May 2008 14:38:17 -0700 Subject: drivers/net/ehea - remove unnecessary memset after kzalloc Signed-off-by: Joe Perches Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 8645224..287a619 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2213,8 +2213,6 @@ static void ehea_vlan_rx_register(struct net_device *dev, goto out; } - memset(cb1->vlan_filter, 0, sizeof(cb1->vlan_filter)); - hret = ehea_h_modify_ehea_port(adapter->handle, port->logical_port_id, H_PORT_CB1, H_PORT_CB1_ALL, cb1); if (hret != H_SUCCESS) -- cgit v0.10.2 From ac731ab66960547c33a4e2c504419389ae747067 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Mon, 12 May 2008 13:41:32 -0400 Subject: S2io: Move all the transmit completions to a single msi-x (alarm) vector - Move all the transmit completions to a single msi-x (alarm) vector. - Enable the continuous timer interrupt for only one transmit fifo. Signed-off-by: Santosh Rastapur Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 0f3d230..e161a84 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -1220,15 +1220,33 @@ static int init_tti(struct s2io_nic *nic, int link) TTI_DATA1_MEM_TX_URNG_B(0x10) | TTI_DATA1_MEM_TX_URNG_C(0x30) | TTI_DATA1_MEM_TX_TIMER_AC_EN; - - if (use_continuous_tx_intrs && (link == LINK_UP)) - val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; + if (i == 0) + if (use_continuous_tx_intrs && (link == LINK_UP)) + val64 |= TTI_DATA1_MEM_TX_TIMER_CI_EN; writeq(val64, &bar0->tti_data1_mem); - val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | - TTI_DATA2_MEM_TX_UFC_B(0x20) | - TTI_DATA2_MEM_TX_UFC_C(0x40) | - TTI_DATA2_MEM_TX_UFC_D(0x80); + if (nic->config.intr_type == MSI_X) { + val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | + TTI_DATA2_MEM_TX_UFC_B(0x100) | + TTI_DATA2_MEM_TX_UFC_C(0x200) | + TTI_DATA2_MEM_TX_UFC_D(0x300); + } else { + if ((nic->config.tx_steering_type == + TX_DEFAULT_STEERING) && + (config->tx_fifo_num > 1) && + (i >= nic->udp_fifo_idx) && + (i < (nic->udp_fifo_idx + + nic->total_udp_fifos))) + val64 = TTI_DATA2_MEM_TX_UFC_A(0x50) | + TTI_DATA2_MEM_TX_UFC_B(0x80) | + TTI_DATA2_MEM_TX_UFC_C(0x100) | + TTI_DATA2_MEM_TX_UFC_D(0x120); + else + val64 = TTI_DATA2_MEM_TX_UFC_A(0x10) | + TTI_DATA2_MEM_TX_UFC_B(0x20) | + TTI_DATA2_MEM_TX_UFC_C(0x40) | + TTI_DATA2_MEM_TX_UFC_D(0x80); + } writeq(val64, &bar0->tti_data2_mem); @@ -3771,7 +3789,7 @@ static void store_xmsi_data(struct s2io_nic *nic) static int s2io_enable_msi_x(struct s2io_nic *nic) { struct XENA_dev_config __iomem *bar0 = nic->bar0; - u64 tx_mat, rx_mat; + u64 rx_mat; u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; @@ -3801,22 +3819,19 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) nic->mac_control.stats_info->sw_stat.mem_allocated += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); - for (i=0; i< MAX_REQUESTED_MSI_X; i++) { + nic->entries[0].entry = 0; + nic->s2io_entries[0].entry = 0; + nic->s2io_entries[0].in_use = MSIX_FLG; + nic->s2io_entries[0].type = MSIX_ALARM_TYPE; + nic->s2io_entries[0].arg = &nic->mac_control.fifos; + + for (i = 1; i < MAX_REQUESTED_MSI_X; i++) { nic->entries[i].entry = i; nic->s2io_entries[i].entry = i; nic->s2io_entries[i].arg = NULL; nic->s2io_entries[i].in_use = 0; } - tx_mat = readq(&bar0->tx_mat0_n[0]); - for (i=0; iconfig.tx_fifo_num; i++, msix_indx++) { - tx_mat |= TX_MAT_SET(i, msix_indx); - nic->s2io_entries[msix_indx].arg = &nic->mac_control.fifos[i]; - nic->s2io_entries[msix_indx].type = MSIX_FIFO_TYPE; - nic->s2io_entries[msix_indx].in_use = MSIX_FLG; - } - writeq(tx_mat, &bar0->tx_mat0_n[0]); - rx_mat = readq(&bar0->rx_mat); for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) { rx_mat |= RX_MAT_SET(j, msix_indx); @@ -4353,15 +4368,35 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) static irqreturn_t s2io_msix_fifo_handle(int irq, void *dev_id) { - struct fifo_info *fifo = (struct fifo_info *)dev_id; - struct s2io_nic *sp = fifo->nic; + int i; + struct fifo_info *fifos = (struct fifo_info *)dev_id; + struct s2io_nic *sp = fifos->nic; + struct XENA_dev_config __iomem *bar0 = sp->bar0; + struct config_param *config = &sp->config; + u64 reason; - if (!is_s2io_card_up(sp)) + if (unlikely(!is_s2io_card_up(sp))) + return IRQ_NONE; + + reason = readq(&bar0->general_int_status); + if (unlikely(reason == S2IO_MINUS_ONE)) + /* Nothing much can be done. Get out */ return IRQ_HANDLED; - tx_intr_handler(fifo); + writeq(S2IO_MINUS_ONE, &bar0->general_int_mask); + + if (reason & GEN_INTR_TXTRAFFIC) + writeq(S2IO_MINUS_ONE, &bar0->tx_traffic_int); + + for (i = 0; i < config->tx_fifo_num; i++) + tx_intr_handler(&fifos[i]); + + writeq(sp->general_int_mask, &bar0->general_int_mask); + readl(&bar0->general_int_status); + return IRQ_HANDLED; } + static void s2io_txpic_intr_handle(struct s2io_nic *sp) { struct XENA_dev_config __iomem *bar0 = sp->bar0; @@ -6985,62 +7020,61 @@ static int s2io_add_isr(struct s2io_nic * sp) /* After proper initialization of H/W, register ISR */ if (sp->config.intr_type == MSI_X) { - int i, msix_tx_cnt=0,msix_rx_cnt=0; - - for (i=1; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { - if (sp->s2io_entries[i].type == MSIX_FIFO_TYPE) { - sprintf(sp->desc[i], "%s:MSI-X-%d-TX", + int i, msix_rx_cnt = 0; + + for (i = 0; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { + if (sp->s2io_entries[i].type == + MSIX_RING_TYPE) { + sprintf(sp->desc[i], "%s:MSI-X-%d-RX", + dev->name, i); + err = request_irq(sp->entries[i].vector, + s2io_msix_ring_handle, 0, + sp->desc[i], + sp->s2io_entries[i].arg); + } else if (sp->s2io_entries[i].type == + MSIX_ALARM_TYPE) { + sprintf(sp->desc[i], "%s:MSI-X-%d-TX", dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_fifo_handle, 0, sp->desc[i], - sp->s2io_entries[i].arg); - /* If either data or addr is zero print it */ - if(!(sp->msix_info[i].addr && - sp->msix_info[i].data)) { - DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx " - "Data:0x%llx\n",sp->desc[i], - (unsigned long long) - sp->msix_info[i].addr, - (unsigned long long) - sp->msix_info[i].data); - } else { - msix_tx_cnt++; + err = request_irq(sp->entries[i].vector, + s2io_msix_fifo_handle, 0, + sp->desc[i], + sp->s2io_entries[i].arg); + } - } else { - sprintf(sp->desc[i], "%s:MSI-X-%d-RX", - dev->name, i); - err = request_irq(sp->entries[i].vector, - s2io_msix_ring_handle, 0, sp->desc[i], - sp->s2io_entries[i].arg); - /* If either data or addr is zero print it */ - if(!(sp->msix_info[i].addr && + /* if either data or addr is zero print it. */ + if (!(sp->msix_info[i].addr && sp->msix_info[i].data)) { - DBG_PRINT(ERR_DBG, "%s @ Addr:0x%llx " - "Data:0x%llx\n",sp->desc[i], + DBG_PRINT(ERR_DBG, + "%s @Addr:0x%llx Data:0x%llx\n", + sp->desc[i], (unsigned long long) sp->msix_info[i].addr, (unsigned long long) - sp->msix_info[i].data); - } else { + ntohl(sp->msix_info[i].data)); + } else msix_rx_cnt++; + if (err) { + remove_msix_isr(sp); + + DBG_PRINT(ERR_DBG, + "%s:MSI-X-%d registration " + "failed\n", dev->name, i); + + DBG_PRINT(ERR_DBG, + "%s: Defaulting to INTA\n", + dev->name); + sp->config.intr_type = INTA; + break; } - } - if (err) { - remove_msix_isr(sp); - DBG_PRINT(ERR_DBG,"%s:MSI-X-%d registration " - "failed\n", dev->name, i); - DBG_PRINT(ERR_DBG, "%s: defaulting to INTA\n", - dev->name); - sp->config.intr_type = INTA; - break; - } - sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; + sp->s2io_entries[i].in_use = + MSIX_REGISTERED_SUCCESS; + } if (!err) { - printk(KERN_INFO "MSI-X-TX %d entries enabled\n", - msix_tx_cnt); printk(KERN_INFO "MSI-X-RX %d entries enabled\n", - msix_rx_cnt); + --msix_rx_cnt); + DBG_PRINT(INFO_DBG, "MSI-X-TX entries enabled" + " through alarm vector\n"); } } if (sp->config.intr_type == INTA) { @@ -7218,7 +7252,7 @@ static int s2io_card_up(struct s2io_nic * sp) /* Enable select interrupts */ en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS); if (sp->config.intr_type != INTA) - en_dis_able_nic_intrs(sp, ENA_ALL_INTRS, DISABLE_INTRS); + en_dis_able_nic_intrs(sp, TX_TRAFFIC_INTR, ENABLE_INTRS); else { interruptible = TX_TRAFFIC_INTR | RX_TRAFFIC_INTR; interruptible |= TX_PIC_INTR; diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 0709ebae..9a4b772 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -849,8 +849,8 @@ struct s2io_msix_entry void *arg; u8 type; -#define MSIX_FIFO_TYPE 1 -#define MSIX_RING_TYPE 2 +#define MSIX_ALARM_TYPE 1 +#define MSIX_RING_TYPE 2 u8 in_use; #define MSIX_REGISTERED_SUCCESS 0xAA @@ -982,6 +982,7 @@ struct s2io_nic { u16 lro_max_aggr_per_sess; volatile unsigned long state; u64 general_int_mask; + #define VPD_STRING_LEN 80 u8 product_name[VPD_STRING_LEN]; u8 serial_num[VPD_STRING_LEN]; -- cgit v0.10.2 From f61e0a3544be2f615a0af4aec71eb85a96bdbd62 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Mon, 12 May 2008 13:42:17 -0400 Subject: S2io: Added napi support when MSIX is enabled. - Added napi support when MSIX is enabled. - Moved test_msi function from s2io_open to probe function. Signed-off-by: Sreenivasa Honnur Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik diff --git a/drivers/net/s2io-regs.h b/drivers/net/s2io-regs.h index 2109508..f8274f8 100644 --- a/drivers/net/s2io-regs.h +++ b/drivers/net/s2io-regs.h @@ -250,7 +250,7 @@ struct XENA_dev_config { u64 tx_mat0_n[0x8]; #define TX_MAT_SET(fifo, msi) vBIT(msi, (8 * fifo), 8) - u8 unused_1[0x8]; + u64 xmsi_mask_reg; u64 stat_byte_cnt; #define STAT_BC(n) vBIT(n,4,12) diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index e161a84..807fb8d 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2832,6 +2832,15 @@ static void free_rx_buffers(struct s2io_nic *sp) } } +static int s2io_chk_rx_buffers(struct ring_info *ring) +{ + if (fill_rx_buffers(ring) == -ENOMEM) { + DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name); + DBG_PRINT(INFO_DBG, " in Rx Intr!!\n"); + } + return 0; +} + /** * s2io_poll - Rx interrupt handler for NAPI support * @napi : pointer to the napi structure. @@ -2845,57 +2854,72 @@ static void free_rx_buffers(struct s2io_nic *sp) * 0 on success and 1 if there are No Rx packets to be processed. */ -static int s2io_poll(struct napi_struct *napi, int budget) +static int s2io_poll_msix(struct napi_struct *napi, int budget) { - struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi); - struct net_device *dev = nic->dev; - int pkt_cnt = 0, org_pkts_to_process; - struct mac_info *mac_control; + struct ring_info *ring = container_of(napi, struct ring_info, napi); + struct net_device *dev = ring->dev; struct config_param *config; + struct mac_info *mac_control; + int pkts_processed = 0; + u8 *addr = NULL, val8 = 0; + struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; - int i; + int budget_org = budget; - mac_control = &nic->mac_control; config = &nic->config; + mac_control = &nic->mac_control; - nic->pkts_to_process = budget; - org_pkts_to_process = nic->pkts_to_process; + if (unlikely(!is_s2io_card_up(nic))) + return 0; - writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); - readl(&bar0->rx_traffic_int); + pkts_processed = rx_intr_handler(ring, budget); + s2io_chk_rx_buffers(ring); - for (i = 0; i < config->rx_ring_num; i++) { - rx_intr_handler(&mac_control->rings[i]); - pkt_cnt = org_pkts_to_process - nic->pkts_to_process; - if (!nic->pkts_to_process) { - /* Quota for the current iteration has been met */ - goto no_rx; - } + if (pkts_processed < budget_org) { + netif_rx_complete(dev, napi); + /*Re Enable MSI-Rx Vector*/ + addr = (u8 *)&bar0->xmsi_mask_reg; + addr += 7 - ring->ring_no; + val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; + writeb(val8, addr); + val8 = readb(addr); } + return pkts_processed; +} +static int s2io_poll_inta(struct napi_struct *napi, int budget) +{ + struct s2io_nic *nic = container_of(napi, struct s2io_nic, napi); + struct ring_info *ring; + struct net_device *dev = nic->dev; + struct config_param *config; + struct mac_info *mac_control; + int pkts_processed = 0; + int ring_pkts_processed, i; + struct XENA_dev_config __iomem *bar0 = nic->bar0; + int budget_org = budget; - netif_rx_complete(dev, napi); + config = &nic->config; + mac_control = &nic->mac_control; - for (i = 0; i < config->rx_ring_num; i++) { - if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) { - DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name); - DBG_PRINT(INFO_DBG, " in Rx Poll!!\n"); - break; - } - } - /* Re enable the Rx interrupts. */ - writeq(0x0, &bar0->rx_traffic_mask); - readl(&bar0->rx_traffic_mask); - return pkt_cnt; + if (unlikely(!is_s2io_card_up(nic))) + return 0; -no_rx: for (i = 0; i < config->rx_ring_num; i++) { - if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) { - DBG_PRINT(INFO_DBG, "%s:Out of memory", dev->name); - DBG_PRINT(INFO_DBG, " in Rx Poll!!\n"); + ring = &mac_control->rings[i]; + ring_pkts_processed = rx_intr_handler(ring, budget); + s2io_chk_rx_buffers(ring); + pkts_processed += ring_pkts_processed; + budget -= ring_pkts_processed; + if (budget <= 0) break; - } } - return pkt_cnt; + if (pkts_processed < budget_org) { + netif_rx_complete(dev, napi); + /* Re enable the Rx interrupts for the ring */ + writeq(0, &bar0->rx_traffic_mask); + readl(&bar0->rx_traffic_mask); + } + return pkts_processed; } #ifdef CONFIG_NET_POLL_CONTROLLER @@ -2937,7 +2961,7 @@ static void s2io_netpoll(struct net_device *dev) /* check for received packet and indicate up to network */ for (i = 0; i < config->rx_ring_num; i++) - rx_intr_handler(&mac_control->rings[i]); + rx_intr_handler(&mac_control->rings[i], 0); for (i = 0; i < config->rx_ring_num; i++) { if (fill_rx_buffers(&mac_control->rings[i]) == -ENOMEM) { @@ -2953,7 +2977,8 @@ static void s2io_netpoll(struct net_device *dev) /** * rx_intr_handler - Rx interrupt handler - * @nic: device private variable. + * @ring_info: per ring structure. + * @budget: budget for napi processing. * Description: * If the interrupt is because of a received frame or if the * receive ring contains fresh as yet un-processed frames,this function is @@ -2961,15 +2986,15 @@ static void s2io_netpoll(struct net_device *dev) * stopped and sends the skb to the OSM's Rx handler and then increments * the offset. * Return Value: - * NONE. + * No. of napi packets processed. */ -static void rx_intr_handler(struct ring_info *ring_data) +static int rx_intr_handler(struct ring_info *ring_data, int budget) { int get_block, put_block; struct rx_curr_get_info get_info, put_info; struct RxD_t *rxdp; struct sk_buff *skb; - int pkt_cnt = 0; + int pkt_cnt = 0, napi_pkts = 0; int i; struct RxD1* rxdp1; struct RxD3* rxdp3; @@ -2996,7 +3021,7 @@ static void rx_intr_handler(struct ring_info *ring_data) DBG_PRINT(ERR_DBG, "%s: The skb is ", ring_data->dev->name); DBG_PRINT(ERR_DBG, "Null in Rx Intr\n"); - return; + return 0; } if (ring_data->rxd_mode == RXD_MODE_1) { rxdp1 = (struct RxD1*)rxdp; @@ -3033,9 +3058,10 @@ static void rx_intr_handler(struct ring_info *ring_data) rxdp = ring_data->rx_blocks[get_block].block_virt_addr; } - if(ring_data->nic->config.napi){ - ring_data->nic->pkts_to_process -= 1; - if (!ring_data->nic->pkts_to_process) + if (ring_data->nic->config.napi) { + budget--; + napi_pkts++; + if (!budget) break; } pkt_cnt++; @@ -3053,6 +3079,7 @@ static void rx_intr_handler(struct ring_info *ring_data) } } } + return(napi_pkts); } /** @@ -3749,14 +3776,19 @@ static void restore_xmsi_data(struct s2io_nic *nic) { struct XENA_dev_config __iomem *bar0 = nic->bar0; u64 val64; - int i; + int i, msix_index; + + + if (nic->device_type == XFRAME_I_DEVICE) + return; for (i=0; i < MAX_REQUESTED_MSI_X; i++) { + msix_index = (i) ? ((i-1) * 8 + 1): 0; writeq(nic->msix_info[i].addr, &bar0->xmsi_address); writeq(nic->msix_info[i].data, &bar0->xmsi_data); - val64 = (s2BIT(7) | s2BIT(15) | vBIT(i, 26, 6)); + val64 = (s2BIT(7) | s2BIT(15) | vBIT(msix_index, 26, 6)); writeq(val64, &bar0->xmsi_access); - if (wait_for_msix_trans(nic, i)) { + if (wait_for_msix_trans(nic, msix_index)) { DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); continue; } @@ -3767,13 +3799,17 @@ static void store_xmsi_data(struct s2io_nic *nic) { struct XENA_dev_config __iomem *bar0 = nic->bar0; u64 val64, addr, data; - int i; + int i, msix_index; + + if (nic->device_type == XFRAME_I_DEVICE) + return; /* Store and display */ for (i=0; i < MAX_REQUESTED_MSI_X; i++) { - val64 = (s2BIT(15) | vBIT(i, 26, 6)); + msix_index = (i) ? ((i-1) * 8 + 1): 0; + val64 = (s2BIT(15) | vBIT(msix_index, 26, 6)); writeq(val64, &bar0->xmsi_access); - if (wait_for_msix_trans(nic, i)) { + if (wait_for_msix_trans(nic, msix_index)) { DBG_PRINT(ERR_DBG, "failed in %s\n", __FUNCTION__); continue; } @@ -3793,7 +3829,7 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) u16 msi_control; /* Temp variable */ int ret, i, j, msix_indx = 1; - nic->entries = kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct msix_entry), + nic->entries = kmalloc(nic->num_entries * sizeof(struct msix_entry), GFP_KERNEL); if (!nic->entries) { DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", \ @@ -3802,10 +3838,12 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) return -ENOMEM; } nic->mac_control.stats_info->sw_stat.mem_allocated - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (nic->num_entries * sizeof(struct msix_entry)); + + memset(nic->entries, 0, nic->num_entries * sizeof(struct msix_entry)); nic->s2io_entries = - kcalloc(MAX_REQUESTED_MSI_X, sizeof(struct s2io_msix_entry), + kmalloc(nic->num_entries * sizeof(struct s2io_msix_entry), GFP_KERNEL); if (!nic->s2io_entries) { DBG_PRINT(INFO_DBG, "%s: Memory allocation failed\n", @@ -3813,11 +3851,13 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) nic->mac_control.stats_info->sw_stat.mem_alloc_fail_cnt++; kfree(nic->entries); nic->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (nic->num_entries * sizeof(struct msix_entry)); return -ENOMEM; } nic->mac_control.stats_info->sw_stat.mem_allocated - += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + += (nic->num_entries * sizeof(struct s2io_msix_entry)); + memset(nic->s2io_entries, 0, + nic->num_entries * sizeof(struct s2io_msix_entry)); nic->entries[0].entry = 0; nic->s2io_entries[0].entry = 0; @@ -3825,45 +3865,38 @@ static int s2io_enable_msi_x(struct s2io_nic *nic) nic->s2io_entries[0].type = MSIX_ALARM_TYPE; nic->s2io_entries[0].arg = &nic->mac_control.fifos; - for (i = 1; i < MAX_REQUESTED_MSI_X; i++) { - nic->entries[i].entry = i; - nic->s2io_entries[i].entry = i; + for (i = 1; i < nic->num_entries; i++) { + nic->entries[i].entry = ((i - 1) * 8) + 1; + nic->s2io_entries[i].entry = ((i - 1) * 8) + 1; nic->s2io_entries[i].arg = NULL; nic->s2io_entries[i].in_use = 0; } rx_mat = readq(&bar0->rx_mat); - for (j = 0; j < nic->config.rx_ring_num; j++, msix_indx++) { + for (j = 0; j < nic->config.rx_ring_num; j++) { rx_mat |= RX_MAT_SET(j, msix_indx); - nic->s2io_entries[msix_indx].arg - = &nic->mac_control.rings[j]; - nic->s2io_entries[msix_indx].type = MSIX_RING_TYPE; - nic->s2io_entries[msix_indx].in_use = MSIX_FLG; + nic->s2io_entries[j+1].arg = &nic->mac_control.rings[j]; + nic->s2io_entries[j+1].type = MSIX_RING_TYPE; + nic->s2io_entries[j+1].in_use = MSIX_FLG; + msix_indx += 8; } writeq(rx_mat, &bar0->rx_mat); + readq(&bar0->rx_mat); - nic->avail_msix_vectors = 0; - ret = pci_enable_msix(nic->pdev, nic->entries, MAX_REQUESTED_MSI_X); + ret = pci_enable_msix(nic->pdev, nic->entries, nic->num_entries); /* We fail init if error or we get less vectors than min required */ - if (ret >= (nic->config.tx_fifo_num + nic->config.rx_ring_num + 1)) { - nic->avail_msix_vectors = ret; - ret = pci_enable_msix(nic->pdev, nic->entries, ret); - } if (ret) { DBG_PRINT(ERR_DBG, "%s: Enabling MSIX failed\n", nic->dev->name); kfree(nic->entries); nic->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (nic->num_entries * sizeof(struct msix_entry)); kfree(nic->s2io_entries); nic->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + += (nic->num_entries * sizeof(struct s2io_msix_entry)); nic->entries = NULL; nic->s2io_entries = NULL; - nic->avail_msix_vectors = 0; return -ENOMEM; } - if (!nic->avail_msix_vectors) - nic->avail_msix_vectors = MAX_REQUESTED_MSI_X; /* * To enable MSI-X, MSI also needs to be enabled, due to a bug @@ -3935,7 +3968,7 @@ static void remove_msix_isr(struct s2io_nic *sp) int i; u16 msi_control; - for (i = 0; i < MAX_REQUESTED_MSI_X; i++) { + for (i = 0; i < sp->num_entries; i++) { if (sp->s2io_entries[i].in_use == MSIX_REGISTERED_SUCCESS) { int vector = sp->entries[i].vector; @@ -3991,29 +4024,6 @@ static int s2io_open(struct net_device *dev) netif_carrier_off(dev); sp->last_link_state = 0; - if (sp->config.intr_type == MSI_X) { - int ret = s2io_enable_msi_x(sp); - - if (!ret) { - ret = s2io_test_msi(sp); - /* rollback MSI-X, will re-enable during add_isr() */ - remove_msix_isr(sp); - } - if (ret) { - - DBG_PRINT(ERR_DBG, - "%s: MSI-X requested but failed to enable\n", - dev->name); - sp->config.intr_type = INTA; - } - } - - /* NAPI doesn't work well with MSI(X) */ - if (sp->config.intr_type != INTA) { - if(sp->config.napi) - sp->config.napi = 0; - } - /* Initialize H/W and enable interrupts */ err = s2io_card_up(sp); if (err) { @@ -4036,12 +4046,12 @@ hw_init_failed: if (sp->entries) { kfree(sp->entries); sp->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct msix_entry)); + += (sp->num_entries * sizeof(struct msix_entry)); } if (sp->s2io_entries) { kfree(sp->s2io_entries); sp->mac_control.stats_info->sw_stat.mem_freed - += (MAX_REQUESTED_MSI_X * sizeof(struct s2io_msix_entry)); + += (sp->num_entries * sizeof(struct s2io_msix_entry)); } } return err; @@ -4343,25 +4353,29 @@ s2io_alarm_handle(unsigned long data) mod_timer(&sp->alarm_timer, jiffies + HZ / 2); } -static int s2io_chk_rx_buffers(struct ring_info *ring) -{ - if (fill_rx_buffers(ring) == -ENOMEM) { - DBG_PRINT(INFO_DBG, "%s:Out of memory", ring->dev->name); - DBG_PRINT(INFO_DBG, " in Rx Intr!!\n"); - } - return 0; -} - static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) { struct ring_info *ring = (struct ring_info *)dev_id; struct s2io_nic *sp = ring->nic; + struct XENA_dev_config __iomem *bar0 = sp->bar0; + struct net_device *dev = sp->dev; - if (!is_s2io_card_up(sp)) + if (unlikely(!is_s2io_card_up(sp))) return IRQ_HANDLED; - rx_intr_handler(ring); - s2io_chk_rx_buffers(ring); + if (sp->config.napi) { + u8 *addr = NULL, val8 = 0; + + addr = (u8 *)&bar0->xmsi_mask_reg; + addr += (7 - ring->ring_no); + val8 = (ring->ring_no == 0) ? 0x7f : 0xff; + writeb(val8, addr); + val8 = readb(addr); + netif_rx_schedule(dev, &ring->napi); + } else { + rx_intr_handler(ring, 0); + s2io_chk_rx_buffers(ring); + } return IRQ_HANDLED; } @@ -4798,14 +4812,10 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) if (config->napi) { if (reason & GEN_INTR_RXTRAFFIC) { - if (likely(netif_rx_schedule_prep(dev, - &sp->napi))) { - __netif_rx_schedule(dev, &sp->napi); - writeq(S2IO_MINUS_ONE, - &bar0->rx_traffic_mask); - } else - writeq(S2IO_MINUS_ONE, - &bar0->rx_traffic_int); + netif_rx_schedule(dev, &sp->napi); + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_mask); + writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); + readl(&bar0->rx_traffic_int); } } else { /* @@ -4817,7 +4827,7 @@ static irqreturn_t s2io_isr(int irq, void *dev_id) writeq(S2IO_MINUS_ONE, &bar0->rx_traffic_int); for (i = 0; i < config->rx_ring_num; i++) - rx_intr_handler(&mac_control->rings[i]); + rx_intr_handler(&mac_control->rings[i], 0); } /* @@ -7022,8 +7032,9 @@ static int s2io_add_isr(struct s2io_nic * sp) if (sp->config.intr_type == MSI_X) { int i, msix_rx_cnt = 0; - for (i = 0; (sp->s2io_entries[i].in_use == MSIX_FLG); i++) { - if (sp->s2io_entries[i].type == + for (i = 0; i < sp->num_entries; i++) { + if (sp->s2io_entries[i].in_use == MSIX_FLG) { + if (sp->s2io_entries[i].type == MSIX_RING_TYPE) { sprintf(sp->desc[i], "%s:MSI-X-%d-RX", dev->name, i); @@ -7068,7 +7079,7 @@ static int s2io_add_isr(struct s2io_nic * sp) } sp->s2io_entries[i].in_use = MSIX_REGISTERED_SUCCESS; - + } } if (!err) { printk(KERN_INFO "MSI-X-RX %d entries enabled\n", @@ -7115,8 +7126,15 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io) clear_bit(__S2IO_STATE_CARD_UP, &sp->state); /* Disable napi */ - if (config->napi) - napi_disable(&sp->napi); + if (sp->config.napi) { + int off = 0; + if (config->intr_type == MSI_X) { + for (; off < sp->config.rx_ring_num; off++) + napi_disable(&sp->mac_control.rings[off].napi); + } + else + napi_disable(&sp->napi); + } /* disable Tx and Rx traffic on the NIC */ if (do_io) @@ -7208,8 +7226,15 @@ static int s2io_card_up(struct s2io_nic * sp) } /* Initialise napi */ - if (config->napi) - napi_enable(&sp->napi); + if (config->napi) { + int i; + if (config->intr_type == MSI_X) { + for (i = 0; i < sp->config.rx_ring_num; i++) + napi_enable(&sp->mac_control.rings[i].napi); + } else { + napi_enable(&sp->napi); + } + } /* Maintain the state prior to the open */ if (sp->promisc_flg) @@ -7650,9 +7675,6 @@ static int s2io_verify_parm(struct pci_dev *pdev, u8 *dev_intr_type, rx_ring_num = MAX_RX_RINGS; } - if (*dev_intr_type != INTA) - napi = 0; - if ((*dev_intr_type != INTA) && (*dev_intr_type != MSI_X)) { DBG_PRINT(ERR_DBG, "s2io: Wrong intr_type requested. " "Defaulting to INTA\n"); @@ -7953,8 +7975,6 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) * will use eth_mac_addr() for dev->set_mac_address * mac address will be set every time dev->open() is called */ - netif_napi_add(dev, &sp->napi, s2io_poll, 32); - #ifdef CONFIG_NET_POLL_CONTROLLER dev->poll_controller = s2io_netpoll; #endif @@ -7998,6 +8018,32 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) } } + if (sp->config.intr_type == MSI_X) { + sp->num_entries = config->rx_ring_num + 1; + ret = s2io_enable_msi_x(sp); + + if (!ret) { + ret = s2io_test_msi(sp); + /* rollback MSI-X, will re-enable during add_isr() */ + remove_msix_isr(sp); + } + if (ret) { + + DBG_PRINT(ERR_DBG, + "%s: MSI-X requested but failed to enable\n", + dev->name); + sp->config.intr_type = INTA; + } + } + + if (config->intr_type == MSI_X) { + for (i = 0; i < config->rx_ring_num ; i++) + netif_napi_add(dev, &mac_control->rings[i].napi, + s2io_poll_msix, 64); + } else { + netif_napi_add(dev, &sp->napi, s2io_poll_inta, 64); + } + /* Not needed for Herc */ if (sp->device_type & XFRAME_I_DEVICE) { /* @@ -8048,6 +8094,11 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) /* store mac addresses from CAM to s2io_nic structure */ do_s2io_store_unicast_mc(sp); + /* Configure MSIX vector for number of rings configured plus one */ + if ((sp->device_type == XFRAME_II_DEVICE) && + (config->intr_type == MSI_X)) + sp->num_entries = config->rx_ring_num + 1; + /* Store the values of the MSIX table in the s2io_nic structure */ store_xmsi_data(sp); /* reset Nic and bring it to known state */ @@ -8113,8 +8164,14 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre) break; } - if (napi) + switch (sp->config.napi) { + case 0: + DBG_PRINT(ERR_DBG, "%s: NAPI disabled\n", dev->name); + break; + case 1: DBG_PRINT(ERR_DBG, "%s: NAPI enabled\n", dev->name); + break; + } DBG_PRINT(ERR_DBG, "%s: Using %d Tx fifo(s)\n", dev->name, sp->config.tx_fifo_num); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 9a4b772..4706f7f 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -706,7 +706,7 @@ struct ring_info { /* per-ring buffer counter */ u32 rx_bufs_left; - #define MAX_LRO_SESSIONS 32 +#define MAX_LRO_SESSIONS 32 struct lro lro0_n[MAX_LRO_SESSIONS]; u8 lro; @@ -725,6 +725,11 @@ struct ring_info { /* copy of sp->pdev pointer */ struct pci_dev *pdev; + /* Per ring napi struct */ + struct napi_struct napi; + + unsigned long interrupt_count; + /* * Place holders for the virtual and physical addresses of * all the Rx Blocks @@ -841,7 +846,7 @@ struct usr_addr { * Structure to keep track of the MSI-X vectors and the corresponding * argument registered against each vector */ -#define MAX_REQUESTED_MSI_X 17 +#define MAX_REQUESTED_MSI_X 9 struct s2io_msix_entry { u16 vector; @@ -877,7 +882,6 @@ struct s2io_nic { */ int pkts_to_process; struct net_device *dev; - struct napi_struct napi; struct mac_info mac_control; struct config_param config; struct pci_dev *pdev; @@ -948,6 +952,7 @@ struct s2io_nic { */ u8 other_fifo_idx; + struct napi_struct napi; /* after blink, the adapter must be restored with original * values. */ @@ -962,6 +967,7 @@ struct s2io_nic { unsigned long long start_time; struct vlan_group *vlgrp; #define MSIX_FLG 0xA5 + int num_entries; struct msix_entry *entries; int msi_detected; wait_queue_head_t msi_wait; @@ -1104,7 +1110,7 @@ static void __devexit s2io_rem_nic(struct pci_dev *pdev); static int init_shared_mem(struct s2io_nic *sp); static void free_shared_mem(struct s2io_nic *sp); static int init_nic(struct s2io_nic *nic); -static void rx_intr_handler(struct ring_info *ring_data); +static int rx_intr_handler(struct ring_info *ring_data, int budget); static void tx_intr_handler(struct fifo_info *fifo_data); static void s2io_handle_errors(void * dev_id); @@ -1115,7 +1121,8 @@ static void s2io_set_multicast(struct net_device *dev); static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp); static void s2io_link(struct s2io_nic * sp, int link); static void s2io_reset(struct s2io_nic * sp); -static int s2io_poll(struct napi_struct *napi, int budget); +static int s2io_poll_msix(struct napi_struct *napi, int budget); +static int s2io_poll_inta(struct napi_struct *napi, int budget); static void s2io_init_pci(struct s2io_nic * sp); static int do_s2io_prog_unicast(struct net_device *dev, u8 *addr); static void s2io_alarm_handle(unsigned long data); -- cgit v0.10.2 From 0b5923cd477674755dde670ba804649523f27c97 Mon Sep 17 00:00:00 2001 From: Sreenivasa Honnur Date: Mon, 12 May 2008 13:43:05 -0400 Subject: S2io: Version update for napi and MSI-X patches - Updated version number Signed-off-by: Sreenivasa Honnur Signed-off-by: Ramkrishna Vepa Signed-off-by: Jeff Garzik diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index 807fb8d..a20693e 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -86,7 +86,7 @@ #include "s2io.h" #include "s2io-regs.h" -#define DRV_VERSION "2.0.26.23" +#define DRV_VERSION "2.0.26.24" /* S2io Driver name & version. */ static char s2io_driver_name[] = "Neterion"; -- cgit v0.10.2 From 4ecc8c066f3cecb55807644a01435084d8ed638a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 12 May 2008 15:38:26 +0200 Subject: drivers/net/fs_enet: remove null pointer dereference The following code appears in the function fs_init_instance in the file drivers/net/fs_enet/fs_enet-main.c. if (fep->ops == NULL) { printk(KERN_ERR DRV_MODULE_NAME ": %s No matching ops found (%d).\n", ndev->name, fpi->fs_no); err = -EINVAL; goto err; } This code implies that at the point of err, fep->ops can be NULL, so an extra test is needed before dereferencing this value. This problem was found using the following semantic match (http://www.emn.fr/x-info/coccinelle/) // @@ expression E, E1; identifier f; statement S1,S2,S3; @@ * if (E == NULL) { ... when != if (E == NULL) S1 else S2 when != E = E1 * E->f ... when any return ...; } else S3 // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c index 67b4b07..a5baaf5 100644 --- a/drivers/net/fs_enet/fs_enet-main.c +++ b/drivers/net/fs_enet/fs_enet-main.c @@ -1093,7 +1093,7 @@ err: if (registered) unregister_netdev(ndev); - if (fep != NULL) { + if (fep && fep->ops) { (*fep->ops->free_bd)(ndev); (*fep->ops->cleanup_data)(ndev); } -- cgit v0.10.2 From fa701bd24d6e64a2283d6fa386554775fd4336e7 Mon Sep 17 00:00:00 2001 From: Krzysztof Halasa Date: Mon, 19 May 2008 19:00:51 +0200 Subject: WAN: protect HDLC proto list while insmod/rmmod MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit WAN: protect protocol list in hdlc.c with RTNL. Signed-off-by: Krzysztof HaÅ‚asa Signed-off-by: Jeff Garzik diff --git a/drivers/net/wan/hdlc.c b/drivers/net/wan/hdlc.c index 9a83c9d..7f98489 100644 --- a/drivers/net/wan/hdlc.c +++ b/drivers/net/wan/hdlc.c @@ -43,8 +43,7 @@ static const char* version = "HDLC support module revision 1.22"; #undef DEBUG_LINK -static struct hdlc_proto *first_proto = NULL; - +static struct hdlc_proto *first_proto; static int hdlc_change_mtu(struct net_device *dev, int new_mtu) { @@ -314,21 +313,25 @@ void detach_hdlc_protocol(struct net_device *dev) void register_hdlc_protocol(struct hdlc_proto *proto) { + rtnl_lock(); proto->next = first_proto; first_proto = proto; + rtnl_unlock(); } void unregister_hdlc_protocol(struct hdlc_proto *proto) { - struct hdlc_proto **p = &first_proto; - while (*p) { - if (*p == proto) { - *p = proto->next; - return; - } + struct hdlc_proto **p; + + rtnl_lock(); + p = &first_proto; + while (*p != proto) { + BUG_ON(!*p); p = &((*p)->next); } + *p = proto->next; + rtnl_unlock(); } -- cgit v0.10.2 From 864d0ec9db9c0c18b79cebb9d8b7ac75c3b70571 Mon Sep 17 00:00:00 2001 From: Thomas Kunze Date: Mon, 19 May 2008 22:06:51 +0100 Subject: [ARM] 5025/2: fix collie cpu initialisation collie.h: * add some meaningfull names to some gpios collie.c: * initialize cpu registers correctly Signed-off-by: Thomas Kunze Signed-off-by: Russell King diff --git a/arch/arm/mach-sa1100/collie.c b/arch/arm/mach-sa1100/collie.c index 6496eb6..2f772a3 100644 --- a/arch/arm/mach-sa1100/collie.c +++ b/arch/arm/mach-sa1100/collie.c @@ -225,26 +225,28 @@ static void __init collie_init(void) int ret = 0; /* cpu initialize */ - GAFR = ( GPIO_SSP_TXD | \ - GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | GPIO_TIC_ACK | \ - GPIO_32_768kHz ); - - GPDR = ( GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | \ - GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | \ - GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | \ - GPIO_SDLC_AAF | GPIO_UART_SCLK1 | GPIO_32_768kHz ); - GPLR = GPIO_GPIO18; - - // PPC pin setting - PPDR = ( PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | \ - PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | \ - PPC_TXD1 | PPC_TXD2 | PPC_RXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM ); - - PSDR = ( PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4 ); - - GAFR |= GPIO_32_768kHz; - GPDR |= GPIO_32_768kHz; - TUCR = TUCR_32_768kHz; + GAFR = GPIO_SSP_TXD | GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SSP_CLK | + GPIO_MCP_CLK | GPIO_32_768kHz; + + GPDR = GPIO_LDD8 | GPIO_LDD9 | GPIO_LDD10 | GPIO_LDD11 | GPIO_LDD12 | + GPIO_LDD13 | GPIO_LDD14 | GPIO_LDD15 | GPIO_SSP_TXD | + GPIO_SSP_SCLK | GPIO_SSP_SFRM | GPIO_SDLC_SCLK | + COLLIE_GPIO_UCB1x00_RESET | COLLIE_GPIO_nMIC_ON | + COLLIE_GPIO_nREMOCON_ON | GPIO_32_768kHz; + + PPDR = PPC_LDD0 | PPC_LDD1 | PPC_LDD2 | PPC_LDD3 | PPC_LDD4 | PPC_LDD5 | + PPC_LDD6 | PPC_LDD7 | PPC_L_PCLK | PPC_L_LCLK | PPC_L_FCLK | PPC_L_BIAS | + PPC_TXD1 | PPC_TXD2 | PPC_TXD3 | PPC_TXD4 | PPC_SCLK | PPC_SFRM; + + PWER = COLLIE_GPIO_AC_IN | COLLIE_GPIO_CO | COLLIE_GPIO_ON_KEY | + COLLIE_GPIO_WAKEUP | COLLIE_GPIO_nREMOCON_INT | PWER_RTC; + + PGSR = COLLIE_GPIO_nREMOCON_ON; + + PSDR = PPC_RXD1 | PPC_RXD2 | PPC_RXD3 | PPC_RXD4; + + PCFR = PCFR_OPDE; + platform_scoop_config = &collie_pcmcia_config; diff --git a/include/asm-arm/arch-sa1100/collie.h b/include/asm-arm/arch-sa1100/collie.h index 14a344a..762eba5 100644 --- a/include/asm-arm/arch-sa1100/collie.h +++ b/include/asm-arm/arch-sa1100/collie.h @@ -34,9 +34,12 @@ #define COLLIE_GPIO_ON_KEY GPIO_GPIO (0) #define COLLIE_GPIO_AC_IN GPIO_GPIO (1) +#define COLLIE_GPIO_SDIO_INT GPIO_GPIO (11) #define COLLIE_GPIO_CF_IRQ GPIO_GPIO (14) #define COLLIE_GPIO_nREMOCON_INT GPIO_GPIO (15) #define COLLIE_GPIO_UCB1x00_RESET GPIO_GPIO (16) +#define COLLIE_GPIO_nMIC_ON GPIO_GPIO (17) +#define COLLIE_GPIO_nREMOCON_ON GPIO_GPIO (18) #define COLLIE_GPIO_CO GPIO_GPIO (20) #define COLLIE_GPIO_MCP_CLK GPIO_GPIO (21) #define COLLIE_GPIO_CF_CD GPIO_GPIO (22) @@ -49,6 +52,7 @@ #define COLLIE_IRQ_GPIO_ON_KEY IRQ_GPIO0 #define COLLIE_IRQ_GPIO_AC_IN IRQ_GPIO1 +#define COLLIE_IRQ_GPIO_SDIO_IRQ IRQ_GPIO11 #define COLLIE_IRQ_GPIO_CF_IRQ IRQ_GPIO14 #define COLLIE_IRQ_GPIO_nREMOCON_INT IRQ_GPIO15 #define COLLIE_IRQ_GPIO_CO IRQ_GPIO20 -- cgit v0.10.2 From 59d83db559315bb75aea849ee773f571ddcc3574 Mon Sep 17 00:00:00 2001 From: Tony Lindgren Date: Mon, 19 May 2008 05:20:56 +0100 Subject: [ARM] 5038/1: ARM: OMAP: Remove tsc2102 references from board-palmte.c As noted by Russell King. These depend on tsc210x drivers getting integrated first. Signed-off-by: Tony Lindgren Signed-off-by: Russell King diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index a0b16a7..a4d2012 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -24,7 +24,6 @@ #include #include #include -#include #include #include @@ -315,14 +314,6 @@ static void palmte_get_power_status(struct apm_power_info *info, int *battery) #define palmte_get_power_status NULL #endif -static struct tsc2102_config palmte_tsc2102_config = { - .use_internal = 0, - .monitor = TSC_BAT1 | TSC_AUX | TSC_TEMP, - .temp_at25c = { 2200, 2615 }, - .apm_report = palmte_get_power_status, - .alsa_config = &palmte_alsa_config, -}; - static struct omap_board_config_kernel palmte_config[] __initdata = { { OMAP_TAG_USB, &palmte_usb_config }, { OMAP_TAG_MMC, &palmte_mmc_config }, @@ -336,7 +327,6 @@ static struct spi_board_info palmte_spi_info[] __initdata = { .bus_num = 2, /* uWire (officially) */ .chip_select = 0, /* As opposed to 3 */ .irq = OMAP_GPIO_IRQ(PALMTE_PINTDAV_GPIO), - .platform_data = &palmte_tsc2102_config, .max_speed_hz = 8000000, }, }; -- cgit v0.10.2 From ace94f9efb8ad2c21b308b3bdf02db984d8b3c5f Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 21 May 2008 10:24:46 +0100 Subject: [ARM] 5040/1: BAST: Fix DM9000 IRQ flags initialisation Add the IRQF_TRIGGER_ type to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 661a235..27f63d5 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -374,7 +374,7 @@ static struct resource bast_dm9k_resource[] = { [2] = { .start = IRQ_DM9000, .end = IRQ_DM9000, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; -- cgit v0.10.2 From e142848300b1a13d59a6e5fff8c914096d3830fb Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 21 May 2008 10:25:01 +0100 Subject: [ARM] 5041/1: VR1000: Fix DM9000 IRQ flags initialisation Add the IRQF_TRIGGER_ type to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index c564233..4c4b5c4 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -263,7 +263,7 @@ static struct resource vr1000_dm9k0_resource[] = { [2] = { .start = IRQ_VR1000_DM9000A, .end = IRQ_VR1000_DM9000A, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; @@ -282,7 +282,7 @@ static struct resource vr1000_dm9k1_resource[] = { [2] = { .start = IRQ_VR1000_DM9000N, .end = IRQ_VR1000_DM9000N, - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_HIGH, } }; -- cgit v0.10.2 From 4ba35fbe293be319b1a5d97951e567c0d9527d09 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 22 May 2008 10:19:28 +0100 Subject: [ARM] 5043/1: pxafb: remove unused mode variable in pxafb_init_fbinfo Signed-off-by: Philipp Zabel Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 3ee314b..274bc93 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1351,7 +1351,6 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) struct pxafb_info *fbi; void *addr; struct pxafb_mach_info *inf = dev->platform_data; - struct pxafb_mode_info *mode = inf->modes; /* Alloc the pxafb_info and pseudo_palette in one step */ fbi = kmalloc(sizeof(struct pxafb_info) + sizeof(u32) * 16, GFP_KERNEL); -- cgit v0.10.2 From 90239bbd598c6a0fc7f2c7352e9886bd3be968d0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Wed, 21 May 2008 10:24:17 +0100 Subject: [ARM] 5039/1: S3C244X: Rename SDI device if running on S3C244X. Rename the SDI device if on an S3C2440 or S3C2442. Signed-off-by: Ben Dooks Signed-off-by: Russell King diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index f197bb3..2f01af5 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -65,6 +65,7 @@ void __init s3c244x_map_io(struct map_desc *mach_desc, int size) /* rename any peripherals used differing from the s3c2410 */ + s3c_device_sdi.name = "s3c2440-sdi"; s3c_device_i2c.name = "s3c2440-i2c"; s3c_device_nand.name = "s3c2440-nand"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; -- cgit v0.10.2 From b851cb289d905ea04e5f0b518bf3f28407a72118 Mon Sep 17 00:00:00 2001 From: Russell King Date: Thu, 22 May 2008 16:38:50 +0100 Subject: [ARM] omap: fix omap clk support build errors arch/arm/plat-omap/clock.c:397: warning: "struct cpufreq_frequency_table" declared inside parameter list arch/arm/plat-omap/clock.c:397: warning: its scope is only this definition or declaration, which is probably not what you want arch/arm/plat-omap/clock.c: In function `clk_init_cpufreq_table': arch/arm/plat-omap/clock.c:402: error: structure has no member named `clk_init_cpufreq_table' arch/arm/plat-omap/clock.c:403: error: structure has no member named `clk_init_cpufreq_table' Signed-off-by: Russell King diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c index 2946c19..2db5580 100644 --- a/arch/arm/plat-omap/clock.c +++ b/arch/arm/plat-omap/clock.c @@ -21,6 +21,7 @@ #include #include #include +#include #include diff --git a/include/asm-arm/arch-omap/clock.h b/include/asm-arm/arch-omap/clock.h index 57523bd..12a5e4d 100644 --- a/include/asm-arm/arch-omap/clock.h +++ b/include/asm-arm/arch-omap/clock.h @@ -73,6 +73,8 @@ struct clk { #endif }; +struct cpufreq_frequency_table; + struct clk_functions { int (*clk_enable)(struct clk *clk); void (*clk_disable)(struct clk *clk); @@ -83,6 +85,9 @@ struct clk_functions { void (*clk_allow_idle)(struct clk *clk); void (*clk_deny_idle)(struct clk *clk); void (*clk_disable_unused)(struct clk *clk); +#ifdef CONFIG_CPU_FREQ + void (*clk_init_cpufreq_table)(struct cpufreq_frequency_table **); +#endif }; extern unsigned int mpurate; -- cgit v0.10.2 From a1676072558854b95336c8f7db76b0504e909a0a Mon Sep 17 00:00:00 2001 From: Tony Camuso Date: Thu, 15 May 2008 14:40:14 -0400 Subject: PCI: Correct last two HP entries in the bfsort whitelist Greetings. There is a code flaw in the bfsort whitelist, where there are redundant entries for the same two HP systems, DL385 G2 and DL585 G2. This patch replaces those redundant entries with the correct ones. The correct entries are for large-volume systems, the DL360 and DL380. ----------------------------------------------------------------------- commit ec69f0374c3b0ad7ea991b0e9ac00377acfe5b1a Author: Tony Camuso Date: Wed May 14 07:09:28 2008 -0400 Replace Redundant Whitelist Entries with the Correct Ones The ProLiant DL585 G2 and the DL585 G2 are entered reundantly in the dmi_system_id table. What should have been there are the DL360 and DL380. This patch simply replaces the redundant entries with the correct entries. arch/x86/pci/common.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Tony Camuso Signed-off-by: Pat Schoeller Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/pci/common.c b/arch/x86/pci/common.c index 6e64aaf..940185e 100644 --- a/arch/x86/pci/common.c +++ b/arch/x86/pci/common.c @@ -328,18 +328,18 @@ static struct dmi_system_id __devinitdata pciprobe_dmi_table[] = { #endif { .callback = set_bf_sort, - .ident = "HP ProLiant DL385 G2", + .ident = "HP ProLiant DL360", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL385 G2"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL360"), }, }, { .callback = set_bf_sort, - .ident = "HP ProLiant DL585 G2", + .ident = "HP ProLiant DL380", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "HP"), - DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL585 G2"), + DMI_MATCH(DMI_PRODUCT_NAME, "ProLiant DL380"), }, }, {} -- cgit v0.10.2 From 76994412f8e824e79a593d6777ec327d85f942b2 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 22 May 2008 19:22:25 +0300 Subject: slub: ksize() abuse checks Add a WARN_ON for pages that don't have PageSlab nor PageCompound set to catch the worst abusers of ksize() in the kernel. Acked-by: Christoph Lameter Cc: Matt Mackall Signed-off-by: Pekka Enberg diff --git a/mm/slub.c b/mm/slub.c index a505a82..0987d1c 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2726,9 +2726,10 @@ size_t ksize(const void *object) page = virt_to_head_page(object); - if (unlikely(!PageSlab(page))) + if (unlikely(!PageSlab(page))) { + WARN_ON(!PageCompound(page)); return PAGE_SIZE << compound_order(page); - + } s = page->slab; #ifdef CONFIG_SLUB_DEBUG -- cgit v0.10.2 From b9a2f2e450b0f770bb4347ae8d48eb2dea701e24 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Thu, 22 May 2008 10:48:59 -0700 Subject: netlink: Fix nla_parse_nested_compat() to call nla_parse() directly The purpose of nla_parse_nested_compat() is to parse attributes which contain a struct followed by a stream of nested attributes. So far, it called nla_parse_nested() to parse the stream of nested attributes which was wrong, as nla_parse_nested() expects a container attribute as data which holds the attribute stream. It needs to call nla_parse() directly while pointing at the next possible alignment point after the struct in the beginning of the attribute. With this patch, I can no longer reproduce the reported leftover warnings. Signed-off-by: Thomas Graf Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/net/netlink.h b/include/net/netlink.h index a5506c4..112dcdf 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -772,12 +772,13 @@ static inline int __nla_parse_nested_compat(struct nlattr *tb[], int maxtype, const struct nla_policy *policy, int len) { - if (nla_len(nla) < len) + int nested_len = nla_len(nla) - NLA_ALIGN(len); + + if (nested_len < 0) return -1; - if (nla_len(nla) >= NLA_ALIGN(len) + sizeof(struct nlattr)) - return nla_parse_nested(tb, maxtype, - nla_data(nla) + NLA_ALIGN(len), - policy); + if (nested_len >= nla_attr_size(0)) + return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len), + nested_len, policy); memset(tb, 0, sizeof(struct nlattr *) * (maxtype + 1)); return 0; } -- cgit v0.10.2 From a01b3d766c0ad3e63978b0f6faf4004688f13522 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 22 May 2008 12:43:50 -0400 Subject: phylib: do EXPORT_SYMBOL on get_phy_id Commit cac1f3c8 factored out the code for get_phy_id so that it could be reused in multiple places. Turns out that some of the users can be modular, so we need to export this symbol as well. Signed-off-by: Paul Gortmaker Signed-off-by: Jeff Garzik diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index ac3c01d..16a0e7d 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -207,6 +207,7 @@ int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) return 0; } +EXPORT_SYMBOL(get_phy_id); /** * get_phy_device - reads the specified PHY device and returns its @phy_device struct -- cgit v0.10.2 From 288369cc2580178ef6ed7c5c63cc1ef08c803250 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 22 May 2008 18:07:43 +0800 Subject: VIRTIO: Use __skb_queue_purge() Use standard routine for queue purging. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index f926b5a..fe7cdf2 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -470,8 +470,7 @@ static void virtnet_remove(struct virtio_device *vdev) kfree_skb(skb); vi->num--; } - while ((skb = __skb_dequeue(&vi->send)) != NULL) - kfree_skb(skb); + __skb_queue_purge(&vi->send); BUG_ON(vi->num != 0); -- cgit v0.10.2 From 56cfe5d028687468f76e8b613c63ca41f209982d Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Thu, 22 May 2008 18:09:06 +0800 Subject: NETFRONT: Use __skb_queue_purge() Use standard routine for queue purging. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik diff --git a/drivers/net/xen-netfront.c b/drivers/net/xen-netfront.c index 8bddff1..d26f69b 100644 --- a/drivers/net/xen-netfront.c +++ b/drivers/net/xen-netfront.c @@ -946,8 +946,7 @@ err: work_done++; } - while ((skb = __skb_dequeue(&errq))) - kfree_skb(skb); + __skb_queue_purge(&errq); work_done -= handle_incoming_queue(dev, &rxq); @@ -1079,8 +1078,7 @@ static void xennet_release_rx_bufs(struct netfront_info *np) } } - while ((skb = __skb_dequeue(&free_list)) != NULL) - dev_kfree_skb(skb); + __skb_queue_purge(&free_list); spin_unlock_bh(&np->rx_lock); } -- cgit v0.10.2 From f7f312a0c7e7a1947cf193e0e94a257ad7742cb2 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 20 May 2008 17:13:52 +0800 Subject: 3C509: rx_bytes should not be increased when alloc_skb failed If alloc_skb failed, the recieved packet will be dropped. Do not increase rx_bytes for dropped packet. Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik diff --git a/drivers/net/3c509.c b/drivers/net/3c509.c index e6c545f..fe6d841 100644 --- a/drivers/net/3c509.c +++ b/drivers/net/3c509.c @@ -1063,7 +1063,6 @@ el3_rx(struct net_device *dev) struct sk_buff *skb; skb = dev_alloc_skb(pkt_len+5); - dev->stats.rx_bytes += pkt_len; if (el3_debug > 4) printk("Receiving packet size %d status %4.4x.\n", pkt_len, rx_status); @@ -1078,6 +1077,7 @@ el3_rx(struct net_device *dev) skb->protocol = eth_type_trans(skb,dev); netif_rx(skb); dev->last_rx = jiffies; + dev->stats.rx_bytes += pkt_len; dev->stats.rx_packets++; continue; } -- cgit v0.10.2 From 43fc63dceb8ff58c5ef0a30c70abd31336b5e8b4 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sun, 20 Apr 2008 14:32:34 +0900 Subject: xirc2ps_cs: re-initialize the multicast address in do_reset keep bit7,8 of XIRCREG42_SWC1 in set_multicast_list. Signed-off-by: Komuro Signed-off-by: Jeff Garzik diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c index d041f83..f6c4698 100644 --- a/drivers/net/pcmcia/xirc2ps_cs.c +++ b/drivers/net/pcmcia/xirc2ps_cs.c @@ -1461,22 +1461,25 @@ static void set_multicast_list(struct net_device *dev) { unsigned int ioaddr = dev->base_addr; + unsigned value; SelectPage(0x42); + value = GetByte(XIRCREG42_SWC1) & 0xC0; + if (dev->flags & IFF_PROMISC) { /* snoop */ - PutByte(XIRCREG42_SWC1, 0x06); /* set MPE and PME */ + PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */ } else if (dev->mc_count > 9 || (dev->flags & IFF_ALLMULTI)) { - PutByte(XIRCREG42_SWC1, 0x02); /* set MPE */ + PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */ } else if (dev->mc_count) { /* the chip can filter 9 addresses perfectly */ - PutByte(XIRCREG42_SWC1, 0x01); + PutByte(XIRCREG42_SWC1, value | 0x01); SelectPage(0x40); PutByte(XIRCREG40_CMD0, Offline); set_addresses(dev); SelectPage(0x40); PutByte(XIRCREG40_CMD0, EnableRecv | Online); } else { /* standard usage */ - PutByte(XIRCREG42_SWC1, 0x00); + PutByte(XIRCREG42_SWC1, value | 0x00); } SelectPage(0); } @@ -1722,6 +1725,7 @@ do_reset(struct net_device *dev, int full) /* enable receiver and put the mac online */ if (full) { + set_multicast_list(dev); SelectPage(0x40); PutByte(XIRCREG40_CMD0, EnableRecv | Online); } -- cgit v0.10.2 From bdefff1f54cb76a19700663f211350de2f65cc91 Mon Sep 17 00:00:00 2001 From: Komuro Date: Mon, 5 May 2008 10:51:12 +0900 Subject: fmvj18x_cs: add NextCom NC5310 rev B support fmvj18x_cs: The manfid of "NextCom NC5310 rev B" is MANF_ID_FUJITSU. but this card is MBH10302 based card. use ConfigBase to detect the cardtype for this card. Signed-off-by: Komuro Signed-off-by: Jeff Garzik diff --git a/drivers/net/pcmcia/fmvj18x_cs.c b/drivers/net/pcmcia/fmvj18x_cs.c index 8f328a0..a550c9b 100644 --- a/drivers/net/pcmcia/fmvj18x_cs.c +++ b/drivers/net/pcmcia/fmvj18x_cs.c @@ -391,7 +391,9 @@ static int fmvj18x_config(struct pcmcia_device *link) cardtype = CONTEC; break; case MANFID_FUJITSU: - if (link->card_id == PRODID_FUJITSU_MBH10302) + if (link->conf.ConfigBase == 0x0fe0) + cardtype = MBH10302; + else if (link->card_id == PRODID_FUJITSU_MBH10302) /* RATOC REX-5588/9822/4886's PRODID are 0004(=MBH10302), but these are MBH10304 based card. */ cardtype = MBH10304; -- cgit v0.10.2 From 4f74369422b883164c50b5936517d010a3e1ce59 Mon Sep 17 00:00:00 2001 From: Dominik Brodowski Date: Thu, 22 May 2008 08:52:05 +0200 Subject: [CPUFREQ] clarify license of freq_table.c Signed-off-by: Dominik Brodowski Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/freq_table.c b/drivers/cpufreq/freq_table.c index ae6cd60..b64c6bc 100644 --- a/drivers/cpufreq/freq_table.c +++ b/drivers/cpufreq/freq_table.c @@ -2,6 +2,11 @@ * linux/drivers/cpufreq/freq_table.c * * Copyright (C) 2002 - 2003 Dominik Brodowski + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * */ #include -- cgit v0.10.2 From 526c1c23a23785114f618624e22480a3317388e1 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 May 2008 22:15:31 +0900 Subject: sh: fix USBF resource for sh7722 The USBF function on sh7722 is currently not working with the m66592_udc driver. The driver is using platform_get_resource_byname() so my commit a0d29798e568116aa6c32aef7bab2d9e620c88ad broke sh7722 support. The long term fix is to replace platform_get_resource_byname() in the driver with platform_get_resource(), but this helps until that happens. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 0693140..62ebccf 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -16,7 +16,7 @@ static struct resource usbf_resources[] = { [0] = { - .name = "USBF", + .name = "m66592_udc", .start = 0x04480000, .end = 0x044800FF, .flags = IORESOURCE_MEM, -- cgit v0.10.2 From 760130447248de94943cf75c80fa3ac8fe9d977d Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 May 2008 22:19:39 +0900 Subject: sh: fix VPU interrupt vector for sh7723 This patch fixes a VPU vector typo for sh7723. The correct value is 0x980, the same as for sh7722. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 16925cf..629b06c 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -153,7 +153,7 @@ static struct intc_vect vectors[] __initdata = { INTC_VECT(VIO_VOUI,0x8E0), INTC_VECT(SCIFA_SCIFA0,0x900), - INTC_VECT(VPU_VPUI,0x920), + INTC_VECT(VPU_VPUI,0x980), INTC_VECT(TPU_TPUI,0x9A0), INTC_VECT(ADC_ADI,0x9E0), INTC_VECT(USB_USI0,0xA20), -- cgit v0.10.2 From b76baf4cf5978efeabf5a3e054551e40ef599b69 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 May 2008 22:24:51 +0900 Subject: sh: add probe support for new sh7723 cut This patch adds support for sh7723 silicon with a prr value of 0x51. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4/probe.c b/arch/sh/kernel/cpu/sh4/probe.c index ebceb0d..be49269 100644 --- a/arch/sh/kernel/cpu/sh4/probe.c +++ b/arch/sh/kernel/cpu/sh4/probe.c @@ -132,6 +132,7 @@ int __init detect_cpu_and_cache_system(void) switch (prr) { case 0x50: + case 0x51: boot_cpu_data.type = CPU_SH7723; boot_cpu_data.flags |= CPU_HAS_FPU | CPU_HAS_L2_CACHE; break; -- cgit v0.10.2 From fa7ff086008d1af6b7325bf556a0cf70aaf2efd3 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 May 2008 22:34:28 +0900 Subject: sh: use sm501 8250 mfd support on r2d boards Make use of recently added sm501 8250 uart support, commit 61711f8fd8180e458cfb6846bcf4fc636a95f3db makes the mfd code handle 8250 uarts so there is no longer need to do it from the r2d board code. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/boards/renesas/rts7751r2d/setup.c b/arch/sh/boards/renesas/rts7751r2d/setup.c index 452d0d6..2308e87 100644 --- a/arch/sh/boards/renesas/rts7751r2d/setup.c +++ b/arch/sh/boards/renesas/rts7751r2d/setup.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include #include @@ -109,27 +108,6 @@ static struct platform_device heartbeat_device = { .resource = heartbeat_resources, }; -static struct plat_serial8250_port uart_platform_data[] = { - { - .membase = (void __iomem *)0xb3e30000, - .mapbase = 0xb3e30000, - .iotype = UPIO_MEM, - .irq = IRQ_VOYAGER, - .flags = UPF_BOOT_AUTOCONF | UPF_SHARE_IRQ, - .regshift = 2, - .uartclk = (9600 * 16), - }, - { 0 }, -}; - -static struct platform_device uart_device = { - .name = "serial8250", - .id = PLAT8250_DEV_PLATFORM, - .dev = { - .platform_data = uart_platform_data, - }, -}; - static struct resource sm501_resources[] = { [0] = { .start = 0x10000000, @@ -185,11 +163,7 @@ static struct sm501_platdata_fb sm501_fb_pdata = { }; static struct sm501_initdata sm501_initdata = { - .gpio_high = { - .set = 0x00001fe0, - .mask = 0x0, - }, - .devices = SM501_USE_USB_HOST, + .devices = SM501_USE_USB_HOST | SM501_USE_UART0, }; static struct sm501_platdata sm501_platform_data = { @@ -208,7 +182,6 @@ static struct platform_device sm501_device = { }; static struct platform_device *rts7751r2d_devices[] __initdata = { - &uart_device, &sm501_device, &heartbeat_device, &spi_sh_sci_device, @@ -272,16 +245,6 @@ static void __init rts7751r2d_setup(char **cmdline_p) sm501_reg = (void __iomem *)0xb3e00000 + SM501_DRAM_CONTROL; writel(readl(sm501_reg) | 0x00f107c0, sm501_reg); - - /* - * Power Mode Gate - Enable UART0 - */ - - sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_0_GATE; - writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); - - sm501_reg = (void __iomem *)0xb3e00000 + SM501_POWER_MODE_1_GATE; - writel(readl(sm501_reg) | (1 << SM501_GATE_UART0), sm501_reg); } /* -- cgit v0.10.2 From c511afb41f21857fbbae78f83f88b1247597f46f Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Thu, 22 May 2008 22:38:36 +0900 Subject: sh: update Migo-R defconfig Update the Migo-R defconfig to include support for KEYSC, I2C, RTC and NAND and NOR MTD devices. Signed-off-by: Magnus Damm Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index ee59008..287408b 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Wed Feb 6 21:52:20 2008 +# Linux kernel version: 2.6.26-rc3 +# Thu May 22 14:30:07 2008 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -20,6 +20,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -36,18 +37,16 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set @@ -61,11 +60,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -77,11 +78,15 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y # CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -105,7 +110,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # System type @@ -118,6 +122,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -135,6 +140,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set # CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set @@ -142,6 +148,7 @@ CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set CONFIG_CPU_SUBTYPE_SH7722=y +# CONFIG_CPU_SUBTYPE_SH7366 is not set # CONFIG_CPU_SUBTYPE_SH5_101 is not set # CONFIG_CPU_SUBTYPE_SH5_103 is not set @@ -255,7 +262,6 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # @@ -323,8 +329,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -376,7 +380,90 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set -# CONFIG_MTD is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0xffffffff +CONFIG_MTD_PHYSMAP_LEN=0 +CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +CONFIG_MTD_NAND=y +# CONFIG_MTD_NAND_VERIFY_WRITE is not set +# CONFIG_MTD_NAND_ECC_SMC is not set +# CONFIG_MTD_NAND_MUSEUM_IDS is not set +CONFIG_MTD_NAND_IDS=y +# CONFIG_MTD_NAND_DISKONCHIP is not set +# CONFIG_MTD_NAND_NANDSIM is not set +CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -385,11 +472,13 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -461,6 +550,7 @@ CONFIG_SMC91X=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -482,13 +572,20 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_EVDEV is not set +CONFIG_INPUT_EVDEV=y # CONFIG_INPUT_EVBUG is not set # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_SH_KEYSC=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -508,6 +605,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -531,16 +629,40 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set - -# -# SPI support -# +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +# CONFIG_I2C_CHARDEV is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set +CONFIG_I2C_SH_MOBILE=y + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -553,12 +675,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -592,6 +724,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -608,6 +742,7 @@ CONFIG_USB_GADGET_SELECTED=y CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y CONFIG_SUPERH_BUILT_IN_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -623,7 +758,9 @@ CONFIG_USB_G_SERIAL=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -640,15 +777,31 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_TEST is not set # +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +CONFIG_RTC_DRV_RS5C372=y +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set + +# # SPI RTC drivers # # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -657,10 +810,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_SH=y - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -673,13 +822,10 @@ CONFIG_RTC_DRV_SH=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -720,10 +866,13 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set @@ -743,6 +892,7 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -763,48 +913,77 @@ CONFIG_EARLY_PRINTK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y @@ -812,6 +991,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v0.10.2 From c4ea6fcf5a192dbba54666f308bdace1c278e0c1 Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Wed, 14 May 2008 16:27:29 -0700 Subject: module loading ELF handling: use SELFMAG instead of numeric constant Signed-off-by: Cyrill Gorcunov Signed-off-by: Andrew Morton Signed-off-by: Rusty Russell diff --git a/kernel/module.c b/kernel/module.c index f5e9491..e6daf9a 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1780,7 +1780,7 @@ static struct module *load_module(void __user *umod, /* Sanity checks against insmoding binaries or wrong arch, weird elf version */ - if (memcmp(hdr->e_ident, ELFMAG, 4) != 0 + if (memcmp(hdr->e_ident, ELFMAG, SELFMAG) != 0 || hdr->e_type != ET_REL || !elf_check_arch(hdr) || hdr->e_shentsize != sizeof(*sechdrs)) { -- cgit v0.10.2 From 34e4e2fef4c7a2f7699b3d25e48d871d3ac4c3e7 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Tue, 20 May 2008 13:59:48 +0400 Subject: modules: proper cleanup of kobject without CONFIG_SYSFS kobject: '' (ffffffffa0104050): is not initialized, yet kobject_put() is being called. ------------[ cut here ]------------ WARNING: at /home/den/src/linux-netns26/lib/kobject.c:583 kobject_put+0x53/0x55() Modules linked in: ipv6 nfsd lockd nfs_acl auth_rpcgss sunrpc exportfs ide_cd_mod cdrom button [last unloaded: pktgen] comm: rmmod Tainted: G W 2.6.26-rc3 #585 Call Trace: [] warn_on_slowpath+0x58/0x7a [] ? printk+0x67/0x69 [] ? printk+0x67/0x69 [] kobject_put+0x53/0x55 [] free_module+0x87/0xfa [] sys_delete_module+0x178/0x1e1 [] ? lockdep_sys_exit_thunk+0x35/0x67 [] ? trace_hardirqs_on_thunk+0x35/0x3a [] system_call_after_swapgs+0x7b/0x80 ---[ end trace 8f5aafa7f6406cf8 ]--- mod->mkobj.kobj is not initialized without CONFIG_SYSFS. Do not call kobject_put in this case. Signed-off-by: Denis V. Lunev Cc: Rusty Russell Cc: Kay Sievers Signed-off-by: Rusty Russell diff --git a/kernel/module.c b/kernel/module.c index e6daf9a..5f80478 100644 --- a/kernel/module.c +++ b/kernel/module.c @@ -1337,7 +1337,19 @@ out_unreg: kobject_put(&mod->mkobj.kobj); return err; } -#endif + +static void mod_sysfs_fini(struct module *mod) +{ + kobject_put(&mod->mkobj.kobj); +} + +#else /* CONFIG_SYSFS */ + +static void mod_sysfs_fini(struct module *mod) +{ +} + +#endif /* CONFIG_SYSFS */ static void mod_kobject_remove(struct module *mod) { @@ -1345,7 +1357,7 @@ static void mod_kobject_remove(struct module *mod) module_param_sysfs_remove(mod); kobject_put(mod->mkobj.drivers_dir); kobject_put(mod->holders_dir); - kobject_put(&mod->mkobj.kobj); + mod_sysfs_fini(mod); } /* -- cgit v0.10.2 From 4d2e7d0d77e4e1e8a21cc990c607985fdba20e66 Mon Sep 17 00:00:00 2001 From: Matti Linnanvuori Date: Tue, 13 May 2008 18:31:47 +0300 Subject: doc: add a chapter about trylock functions [Bug 9011] Add a chapter about trylock functions. http://bugzilla.kernel.org/show_bug.cgi?id=9011 Signed-off-by: Matti Linnanvuori Signed-off-by: Rusty Russell (removed down_trylock) diff --git a/Documentation/DocBook/kernel-locking.tmpl b/Documentation/DocBook/kernel-locking.tmpl index 77c42f4..2510763 100644 --- a/Documentation/DocBook/kernel-locking.tmpl +++ b/Documentation/DocBook/kernel-locking.tmpl @@ -703,6 +703,31 @@ + + The trylock Functions + + There are functions that try to acquire a lock only once and immediately + return a value telling about success or failure to acquire the lock. + They can be used if you need no access to the data protected with the lock + when some other thread is holding the lock. You should acquire the lock + later if you then need access to the data protected with the lock. + + + + spin_trylock() does not spin but returns non-zero if + it acquires the spinlock on the first try or 0 if not. This function can + be used in all contexts like spin_lock: you must have + disabled the contexts that might interrupt you and acquire the spin lock. + + + + mutex_trylock() does not suspend your task + but returns non-zero if it could lock the mutex on the first try + or 0 if not. This function cannot be safely used in hardware or software + interrupt contexts despite not sleeping. + + + Common Examples -- cgit v0.10.2 From 3401a61e16a5b852d4e353c8850c857105a67a9c Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 8 May 2008 15:20:38 +0200 Subject: stop_machine: make stop_machine_run more virtualization friendly On kvm I have seen some rare hangs in stop_machine when I used more guest cpus than hosts cpus. e.g. 32 guest cpus on 1 host cpu triggered the hang quite often. I could also reproduce the problem on a 4 way z/VM host with a 64 way guest. It turned out that the guest was consuming all available cpus mostly for spinning on scheduler locks like rq->lock. This is expected as the threads are calling yield all the time. The problem is now, that the host scheduling decisings together with the guest scheduling decisions and spinlocks not being fair managed to create an interesting scenario similar to a live lock. (Sometimes the hang resolved itself after some minutes) Changing stop_machine to yield the cpu to the hypervisor when yielding inside the guest fixed the problem for me. While I am not completely happy with this patch, I think it causes no harm and it really improves the situation for me. I used cpu_relax for yielding to the hypervisor, does that work on all architectures? p.s.: If you want to reproduce the problem, cpu hotplug and kprobes use stop_machine_run and both triggered the problem after some retries. Signed-off-by: Christian Borntraeger CC: Ingo Molnar Signed-off-by: Rusty Russell diff --git a/kernel/stop_machine.c b/kernel/stop_machine.c index 0101aee..b7350bb 100644 --- a/kernel/stop_machine.c +++ b/kernel/stop_machine.c @@ -62,8 +62,7 @@ static int stopmachine(void *cpu) * help our sisters onto their CPUs. */ if (!prepared && !irqs_disabled) yield(); - else - cpu_relax(); + cpu_relax(); } /* Ack: we are exiting. */ @@ -106,8 +105,10 @@ static int stop_machine(void) } /* Wait for them all to come to life. */ - while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) + while (atomic_read(&stopmachine_thread_ack) != stopmachine_num_threads) { yield(); + cpu_relax(); + } /* If some failed, kill them all. */ if (ret < 0) { -- cgit v0.10.2 From 978b7237123d007b9fa983af6e0e2fa8f97f9934 Mon Sep 17 00:00:00 2001 From: David Chinner Date: Mon, 19 May 2008 16:29:46 +1000 Subject: [XFS] Fix fsync() b0rkage. xfs_fsync() fails to wait for data I/O completion before checking if the inode is dirty or clean to decide whether to log the inode or not. This misses inode size updates when the data flushed by the fsync() is extending the file. Hence, like fdatasync(), we need to wait for I/o completion first, then check the inode for cleanliness. Doing so makes the behaviour of xfs_fsync() identical for fsync and fdatasync and we *always* use synchronous semantics if the inode is dirty. Therefore also kill the differences and remove the unused flags from the xfs_fsync function and callers. SGI-PV: 981296 SGI-Modid: xfs-linux-melb:xfs-kern:31033a Signed-off-by: David Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy diff --git a/fs/xfs/linux-2.6/xfs_file.c b/fs/xfs/linux-2.6/xfs_file.c index 65e78c1..5f60363 100644 --- a/fs/xfs/linux-2.6/xfs_file.c +++ b/fs/xfs/linux-2.6/xfs_file.c @@ -184,19 +184,24 @@ xfs_file_release( return -xfs_release(XFS_I(inode)); } +/* + * We ignore the datasync flag here because a datasync is effectively + * identical to an fsync. That is, datasync implies that we need to write + * only the metadata needed to be able to access the data that is written + * if we crash after the call completes. Hence if we are writing beyond + * EOF we have to log the inode size change as well, which makes it a + * full fsync. If we don't write beyond EOF, the inode core will be + * clean in memory and so we don't need to log the inode, just like + * fsync. + */ STATIC int xfs_file_fsync( struct file *filp, struct dentry *dentry, int datasync) { - int flags = FSYNC_WAIT; - - if (datasync) - flags |= FSYNC_DATA; xfs_iflags_clear(XFS_I(dentry->d_inode), XFS_ITRUNCATED); - return -xfs_fsync(XFS_I(dentry->d_inode), flags, - (xfs_off_t)0, (xfs_off_t)-1); + return -xfs_fsync(XFS_I(dentry->d_inode)); } /* diff --git a/fs/xfs/linux-2.6/xfs_vnode.h b/fs/xfs/linux-2.6/xfs_vnode.h index 9d73cb5..25eb2a9 100644 --- a/fs/xfs/linux-2.6/xfs_vnode.h +++ b/fs/xfs/linux-2.6/xfs_vnode.h @@ -230,14 +230,6 @@ static inline void vn_atime_to_time_t(bhv_vnode_t *vp, time_t *tt) #define ATTR_NOSIZETOK 0x400 /* Don't get the SIZE token */ /* - * Flags to vop_fsync/reclaim. - */ -#define FSYNC_NOWAIT 0 /* asynchronous flush */ -#define FSYNC_WAIT 0x1 /* synchronous fsync or forced reclaim */ -#define FSYNC_INVAL 0x2 /* flush and invalidate cached data */ -#define FSYNC_DATA 0x4 /* synchronous fsync of data only */ - -/* * Tracking vnode activity. */ #if defined(XFS_INODE_TRACE) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index 70702a6..e475e37 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -856,18 +856,14 @@ xfs_readlink( /* * xfs_fsync * - * This is called to sync the inode and its data out to disk. - * We need to hold the I/O lock while flushing the data, and - * the inode lock while flushing the inode. The inode lock CANNOT - * be held while flushing the data, so acquire after we're done - * with that. + * This is called to sync the inode and its data out to disk. We need to hold + * the I/O lock while flushing the data, and the inode lock while flushing the + * inode. The inode lock CANNOT be held while flushing the data, so acquire + * after we're done with that. */ int xfs_fsync( - xfs_inode_t *ip, - int flag, - xfs_off_t start, - xfs_off_t stop) + xfs_inode_t *ip) { xfs_trans_t *tp; int error; @@ -875,103 +871,79 @@ xfs_fsync( xfs_itrace_entry(ip); - ASSERT(start >= 0 && stop >= -1); - if (XFS_FORCED_SHUTDOWN(ip->i_mount)) return XFS_ERROR(EIO); - if (flag & FSYNC_DATA) - filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping); + /* capture size updates in I/O completion before writing the inode. */ + error = filemap_fdatawait(vn_to_inode(XFS_ITOV(ip))->i_mapping); + if (error) + return XFS_ERROR(error); /* - * We always need to make sure that the required inode state - * is safe on disk. The vnode might be clean but because - * of committed transactions that haven't hit the disk yet. - * Likewise, there could be unflushed non-transactional - * changes to the inode core that have to go to disk. + * We always need to make sure that the required inode state is safe on + * disk. The vnode might be clean but we still might need to force the + * log because of committed transactions that haven't hit the disk yet. + * Likewise, there could be unflushed non-transactional changes to the + * inode core that have to go to disk and this requires us to issue + * a synchronous transaction to capture these changes correctly. * - * The following code depends on one assumption: that - * any transaction that changes an inode logs the core - * because it has to change some field in the inode core - * (typically nextents or nblocks). That assumption - * implies that any transactions against an inode will - * catch any non-transactional updates. If inode-altering - * transactions exist that violate this assumption, the - * code breaks. Right now, it figures that if the involved - * update_* field is clear and the inode is unpinned, the - * inode is clean. Either it's been flushed or it's been - * committed and the commit has hit the disk unpinning the inode. - * (Note that xfs_inode_item_format() called at commit clears - * the update_* fields.) + * This code relies on the assumption that if the update_* fields + * of the inode are clear and the inode is unpinned then it is clean + * and no action is required. */ xfs_ilock(ip, XFS_ILOCK_SHARED); - /* If we are flushing data then we care about update_size - * being set, otherwise we care about update_core - */ - if ((flag & FSYNC_DATA) ? - (ip->i_update_size == 0) : - (ip->i_update_core == 0)) { + if (!(ip->i_update_size || ip->i_update_core)) { /* - * Timestamps/size haven't changed since last inode - * flush or inode transaction commit. That means - * either nothing got written or a transaction - * committed which caught the updates. If the - * latter happened and the transaction hasn't - * hit the disk yet, the inode will be still - * be pinned. If it is, force the log. + * Timestamps/size haven't changed since last inode flush or + * inode transaction commit. That means either nothing got + * written or a transaction committed which caught the updates. + * If the latter happened and the transaction hasn't hit the + * disk yet, the inode will be still be pinned. If it is, + * force the log. */ xfs_iunlock(ip, XFS_ILOCK_SHARED); if (xfs_ipincount(ip)) { - _xfs_log_force(ip->i_mount, (xfs_lsn_t)0, - XFS_LOG_FORCE | - ((flag & FSYNC_WAIT) - ? XFS_LOG_SYNC : 0), + error = _xfs_log_force(ip->i_mount, (xfs_lsn_t)0, + XFS_LOG_FORCE | XFS_LOG_SYNC, &log_flushed); } else { /* - * If the inode is not pinned and nothing - * has changed we don't need to flush the - * cache. + * If the inode is not pinned and nothing has changed + * we don't need to flush the cache. */ changed = 0; } - error = 0; } else { /* - * Kick off a transaction to log the inode - * core to get the updates. Make it - * sync if FSYNC_WAIT is passed in (which - * is done by everybody but specfs). The - * sync transaction will also force the log. + * Kick off a transaction to log the inode core to get the + * updates. The sync transaction will also force the log. */ xfs_iunlock(ip, XFS_ILOCK_SHARED); tp = xfs_trans_alloc(ip->i_mount, XFS_TRANS_FSYNC_TS); - if ((error = xfs_trans_reserve(tp, 0, - XFS_FSYNC_TS_LOG_RES(ip->i_mount), - 0, 0, 0))) { + error = xfs_trans_reserve(tp, 0, + XFS_FSYNC_TS_LOG_RES(ip->i_mount), 0, 0, 0); + if (error) { xfs_trans_cancel(tp, 0); return error; } xfs_ilock(ip, XFS_ILOCK_EXCL); /* - * Note - it's possible that we might have pushed - * ourselves out of the way during trans_reserve - * which would flush the inode. But there's no - * guarantee that the inode buffer has actually - * gone out yet (it's delwri). Plus the buffer - * could be pinned anyway if it's part of an - * inode in another recent transaction. So we - * play it safe and fire off the transaction anyway. + * Note - it's possible that we might have pushed ourselves out + * of the way during trans_reserve which would flush the inode. + * But there's no guarantee that the inode buffer has actually + * gone out yet (it's delwri). Plus the buffer could be pinned + * anyway if it's part of an inode in another recent + * transaction. So we play it safe and fire off the + * transaction anyway. */ xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); xfs_trans_ihold(tp, ip); xfs_trans_log_inode(tp, ip, XFS_ILOG_CORE); - if (flag & FSYNC_WAIT) - xfs_trans_set_sync(tp); + xfs_trans_set_sync(tp); error = _xfs_trans_commit(tp, 0, &log_flushed); xfs_iunlock(ip, XFS_ILOCK_EXCL); diff --git a/fs/xfs/xfs_vnodeops.h b/fs/xfs/xfs_vnodeops.h index 8abe8f1..57335ba 100644 --- a/fs/xfs/xfs_vnodeops.h +++ b/fs/xfs/xfs_vnodeops.h @@ -18,8 +18,7 @@ int xfs_open(struct xfs_inode *ip); int xfs_setattr(struct xfs_inode *ip, struct bhv_vattr *vap, int flags, struct cred *credp); int xfs_readlink(struct xfs_inode *ip, char *link); -int xfs_fsync(struct xfs_inode *ip, int flag, xfs_off_t start, - xfs_off_t stop); +int xfs_fsync(struct xfs_inode *ip); int xfs_release(struct xfs_inode *ip); int xfs_inactive(struct xfs_inode *ip); int xfs_lookup(struct xfs_inode *dp, struct xfs_name *name, -- cgit v0.10.2 From 49383b0e98ad1f69ff4c816eb1961f703df12318 Mon Sep 17 00:00:00 2001 From: David Chinner Date: Mon, 19 May 2008 16:29:34 +1000 Subject: [XFS] Don't allow memory reclaim to wait on the filesystem in inode writeback If we allow memory reclaim to wait on the pages under writeback in inode cluster writeback we could deadlock because we are currently holding the ILOCK on the initial writeback inode which is needed in data I/O completion to change the file size or do unwritten extent conversion before the pages are taken out of writeback state. SGI-PV: 981091 SGI-Modid: xfs-linux-melb:xfs-kern:31015a Signed-off-by: David Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index cf0bb9c..739ea45 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2986,7 +2986,7 @@ xfs_iflush_cluster( ASSERT(pag->pag_ici_init); ilist_size = XFS_INODE_CLUSTER_SIZE(mp) * sizeof(xfs_inode_t *); - ilist = kmem_alloc(ilist_size, KM_MAYFAIL); + ilist = kmem_alloc(ilist_size, KM_MAYFAIL|KM_NOFS); if (!ilist) return 0; -- cgit v0.10.2 From c8f5f12e46f079a954d4f7163ba59dadee08ca26 Mon Sep 17 00:00:00 2001 From: David Chinner Date: Tue, 20 May 2008 11:30:15 +1000 Subject: [XFS] Fix inode list allocation size in writeback. We only need to allocate space for the number of inodes in the cluster when writing back inodes, not every byte in the inode cluster. This reduces the amount of memory needing to be allocated to 256 bytes instead of 64k. SGI-PV: 981949 SGI-Modid: xfs-linux-melb:xfs-kern:31182a Signed-off-by: David Chinner Signed-off-by: Christoph Hellwig Signed-off-by: Lachlan McIlroy diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 739ea45..e569bf5 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -2974,6 +2974,7 @@ xfs_iflush_cluster( xfs_mount_t *mp = ip->i_mount; xfs_perag_t *pag = xfs_get_perag(mp, ip->i_ino); unsigned long first_index, mask; + unsigned long inodes_per_cluster; int ilist_size; xfs_inode_t **ilist; xfs_inode_t *iq; @@ -2985,7 +2986,8 @@ xfs_iflush_cluster( ASSERT(pag->pagi_inodeok); ASSERT(pag->pag_ici_init); - ilist_size = XFS_INODE_CLUSTER_SIZE(mp) * sizeof(xfs_inode_t *); + inodes_per_cluster = XFS_INODE_CLUSTER_SIZE(mp) >> mp->m_sb.sb_inodelog; + ilist_size = inodes_per_cluster * sizeof(xfs_inode_t *); ilist = kmem_alloc(ilist_size, KM_MAYFAIL|KM_NOFS); if (!ilist) return 0; @@ -2995,8 +2997,7 @@ xfs_iflush_cluster( read_lock(&pag->pag_ici_lock); /* really need a gang lookup range call here */ nr_found = radix_tree_gang_lookup(&pag->pag_ici_root, (void**)ilist, - first_index, - XFS_INODE_CLUSTER_SIZE(mp)); + first_index, inodes_per_cluster); if (nr_found == 0) goto out_free; -- cgit v0.10.2 From ecc240f90bce23651f9866a1523ba55faa89f009 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Fri, 16 May 2008 06:09:59 +1000 Subject: [POWERPC] PS3: Fix memory hotplug A change was made to walk_memory_resource() in commit 4b119e21d0c66c22e8ca03df05d9de623d0eb50f that added a check of find_lmb(). Add the coresponding lmb_add() call to ps3_mm_add_memory() so that that check will succeed. This fixes the condition where the PS3 boots up with only the 128 MiB of boot memory, and doesn't see the other 128MiB that is available. Signed-off-by: Geoff Levand Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/ps3/mm.c b/arch/powerpc/platforms/ps3/mm.c index 5b3fb2b..3a58ffa 100644 --- a/arch/powerpc/platforms/ps3/mm.c +++ b/arch/powerpc/platforms/ps3/mm.c @@ -317,6 +317,9 @@ static int __init ps3_mm_add_memory(void) return result; } + lmb_add(start_addr, map.r1.size); + lmb_analyze(); + result = online_pages(start_pfn, nr_pages); if (result) -- cgit v0.10.2 From 46a7417963a84f67984af1af59d43261159dd96b Mon Sep 17 00:00:00 2001 From: David Gibson Date: Mon, 19 May 2008 16:16:00 +1000 Subject: [POWERPC] Fix __set_fixmap() for STRICT_MM_TYPECHECKS __set_fixmap() in pgtable_32.c currently fails to compile if STRICT_MM_TYPECHECKS is defined. This fixes it. Signed-off-by: David Gibson Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c index 80d1bab..e0ff59f 100644 --- a/arch/powerpc/mm/pgtable_32.c +++ b/arch/powerpc/mm/pgtable_32.c @@ -402,7 +402,7 @@ void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags) return; } - map_page(address, phys, flags); + map_page(address, phys, pgprot_val(flags)); fixmaps++; } -- cgit v0.10.2 From d1e8d50d5a4bc7e40b119bf513804188ce2933d0 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Tue, 20 May 2008 22:48:03 +1000 Subject: [POWERPC] Add kernstart_addr to list of allowed symbols in prom_init Since commit "85xx: Add support for relocatable kernel (and booting at non-zero)" (37dd2badcfcec35f5e21a0926968d77a404f03c3), PHYSICAL_START is #defined as kernstart_addr if RELOCATABLE and FLATMEM is enabled. PHYSICAL_START is used in prom_init.c and so kernstart_addr needs to be added to the list of allowed symbols that prom_init.c can access. Signed-off-by: Michael Ellerman Acked-by: Kumar Gala Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 8e24fc1..31729a9 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -20,7 +20,7 @@ WHITELIST="add_reloc_offset __bss_start __bss_stop copy_and_flush _end enter_prom memcpy memset reloc_offset __secondary_hold __secondary_hold_acknowledge __secondary_hold_spinloop __start strcmp strcpy strlcpy strlen strncmp strstr logo_linux_clut224 -reloc_got2" +reloc_got2 kernstart_addr" NM="$1" OBJ="$2" -- cgit v0.10.2 From 06a901c5621f85e07e00ac4816c7ca95620ee74a Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Wed, 21 May 2008 16:24:31 +1000 Subject: [POWERPC] mpic: Fix use of uninitialized variable Compiling ppc64_defconfig with gcc 4.3 gives thes warnings: arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_get_priority': arch/powerpc/sysdev/mpic.c:1351: warning: 'is_ipi' may be used uninitialized in this function arch/powerpc/sysdev/mpic.c: In function 'mpic_irq_set_priority': arch/powerpc/sysdev/mpic.c:1328: warning: 'is_ipi' may be used uninitialized in this function It turns out that in the cases where is_ipi is uninitialized, another variable (mpic) will be NULL and it is dereferenced. Protect against this by returning if mpic is NULL in mpic_irq_set_priority, and removing mpic_irq_get_priority completely as it has no in tree callers. This has the nice side effect of making the warning go away. Signed-off-by: Stephen Rothwell Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index 8619f2a..7680001 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -1331,6 +1331,9 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) unsigned long flags; u32 reg; + if (!mpic) + return; + spin_lock_irqsave(&mpic_lock, flags); if (is_ipi) { reg = mpic_ipi_read(src - mpic->ipi_vecs[0]) & @@ -1346,23 +1349,6 @@ void mpic_irq_set_priority(unsigned int irq, unsigned int pri) spin_unlock_irqrestore(&mpic_lock, flags); } -unsigned int mpic_irq_get_priority(unsigned int irq) -{ - unsigned int is_ipi; - struct mpic *mpic = mpic_find(irq, &is_ipi); - unsigned int src = mpic_irq_to_hw(irq); - unsigned long flags; - u32 reg; - - spin_lock_irqsave(&mpic_lock, flags); - if (is_ipi) - reg = mpic_ipi_read(src = mpic->ipi_vecs[0]); - else - reg = mpic_irq_read(src, MPIC_INFO(IRQ_VECTOR_PRI)); - spin_unlock_irqrestore(&mpic_lock, flags); - return (reg & MPIC_VECPRI_PRIORITY_MASK) >> MPIC_VECPRI_PRIORITY_SHIFT; -} - void mpic_setup_this_cpu(void) { #ifdef CONFIG_SMP diff --git a/include/asm-powerpc/mpic.h b/include/asm-powerpc/mpic.h index 943c5a3..a4d0f87 100644 --- a/include/asm-powerpc/mpic.h +++ b/include/asm-powerpc/mpic.h @@ -428,12 +428,11 @@ extern void mpic_init(struct mpic *mpic); */ -/* Change/Read the priority of an interrupt. Default is 8 for irqs and +/* Change the priority of an interrupt. Default is 8 for irqs and * 10 for IPIs. You can call this on both IPIs and IRQ numbers, but the * IPI number is then the offset'ed (linux irq number mapped to the IPI) */ extern void mpic_irq_set_priority(unsigned int irq, unsigned int pri); -extern unsigned int mpic_irq_get_priority(unsigned int irq); /* Setup a non-boot CPU */ extern void mpic_setup_this_cpu(void); -- cgit v0.10.2 From 8962cadbe7cbc4ed0fff94f56ebab505a10afd2e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 23 May 2008 11:41:46 +1000 Subject: [POWERPC] iSeries: Remove unused mail address I don't use my IBM email address normally and people can find me in CREDITS. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/drivers/block/viodasd.c b/drivers/block/viodasd.c index ebfe038..f1c8feb 100644 --- a/drivers/block/viodasd.c +++ b/drivers/block/viodasd.c @@ -3,7 +3,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000-2004 IBM Corporation * diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c index 5245a4a..9d0dfe6 100644 --- a/drivers/cdrom/viocd.c +++ b/drivers/cdrom/viocd.c @@ -6,7 +6,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000-2004 IBM Corporation * diff --git a/drivers/char/viocons.c b/drivers/char/viocons.c index 3d3e1c2..65fb848 100644 --- a/drivers/char/viocons.c +++ b/drivers/char/viocons.c @@ -7,7 +7,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000, 2001, 2002, 2003, 2004 IBM Corporation * diff --git a/drivers/char/viotape.c b/drivers/char/viotape.c index 58aad638..c39ddaf 100644 --- a/drivers/char/viotape.c +++ b/drivers/char/viotape.c @@ -6,7 +6,7 @@ * Authors: Dave Boutcher * Ryan Arnold * Colin Devilbiss - * Stephen Rothwell + * Stephen Rothwell * * (C) Copyright 2000-2004 IBM Corporation * -- cgit v0.10.2 From 289c79a4bd350e8a25065102563ad1a183d1b402 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Fri, 23 May 2008 00:22:04 -0700 Subject: vlan: Use bitmask of feature flags instead of seperate feature bits Herbert Xu points out that the use of seperate feature bits for features to be propagated to VLAN devices is going to get messy real soon. Replace the VLAN feature bits by a bitmask of feature flags to be propagated and restore the old GSO_SHIFT/MASK values. Signed-off-by: Patrick McHardy Acked-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2b02664..f27fd20 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -514,12 +514,10 @@ struct net_device #define NETIF_F_NETNS_LOCAL 8192 /* Does not change network namespaces */ #define NETIF_F_MULTI_QUEUE 16384 /* Has multiple TX/RX queues */ #define NETIF_F_LRO 32768 /* large receive offload */ -#define NETIF_F_VLAN_TSO 65536 /* Supports TSO for VLANs */ -#define NETIF_F_VLAN_CSUM 131072 /* Supports TX checksumming for VLANs */ /* Segmentation offload features */ -#define NETIF_F_GSO_SHIFT 20 -#define NETIF_F_GSO_MASK 0xfff00000 +#define NETIF_F_GSO_SHIFT 16 +#define NETIF_F_GSO_MASK 0xffff0000 #define NETIF_F_TSO (SKB_GSO_TCPV4 << NETIF_F_GSO_SHIFT) #define NETIF_F_UFO (SKB_GSO_UDP << NETIF_F_GSO_SHIFT) #define NETIF_F_GSO_ROBUST (SKB_GSO_DODGY << NETIF_F_GSO_SHIFT) @@ -747,6 +745,9 @@ struct net_device /* rtnetlink link ops */ const struct rtnl_link_ops *rtnl_link_ops; + /* VLAN feature mask */ + unsigned long vlan_features; + /* for setting kernel sock attribute on TCP connection setup */ #define GSO_MAX_SIZE 65536 unsigned int gso_max_size; diff --git a/net/8021q/vlan.c b/net/8021q/vlan.c index 5196130..ab2225d 100644 --- a/net/8021q/vlan.c +++ b/net/8021q/vlan.c @@ -387,14 +387,8 @@ static void vlan_transfer_features(struct net_device *dev, { unsigned long old_features = vlandev->features; - if (dev->features & NETIF_F_VLAN_TSO) { - vlandev->features &= ~VLAN_TSO_FEATURES; - vlandev->features |= dev->features & VLAN_TSO_FEATURES; - } - if (dev->features & NETIF_F_VLAN_CSUM) { - vlandev->features &= ~NETIF_F_ALL_CSUM; - vlandev->features |= dev->features & NETIF_F_ALL_CSUM; - } + vlandev->features &= ~dev->vlan_features; + vlandev->features |= dev->features & dev->vlan_features; if (old_features != vlandev->features) netdev_features_change(vlandev); diff --git a/net/8021q/vlan.h b/net/8021q/vlan.h index 7962569..5229a72 100644 --- a/net/8021q/vlan.h +++ b/net/8021q/vlan.h @@ -7,8 +7,6 @@ #define VLAN_GRP_HASH_SIZE (1 << VLAN_GRP_HASH_SHIFT) #define VLAN_GRP_HASH_MASK (VLAN_GRP_HASH_SIZE - 1) -#define VLAN_TSO_FEATURES (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_SG) - /* Find a VLAN device by the MAC address of its Ethernet device, and * it's VLAN ID. The default configuration is to have VLAN's scope * to be box-wide, so the MAC will be ignored. The mac will only be diff --git a/net/8021q/vlan_dev.c b/net/8021q/vlan_dev.c index b1cfbaa..5d055c2 100644 --- a/net/8021q/vlan_dev.c +++ b/net/8021q/vlan_dev.c @@ -663,10 +663,7 @@ static int vlan_dev_init(struct net_device *dev) (1<<__LINK_STATE_DORMANT))) | (1<<__LINK_STATE_PRESENT); - if (real_dev->features & NETIF_F_VLAN_TSO) - dev->features |= real_dev->features & VLAN_TSO_FEATURES; - if (real_dev->features & NETIF_F_VLAN_CSUM) - dev->features |= real_dev->features & NETIF_F_ALL_CSUM; + dev->features |= real_dev->features & real_dev->vlan_features; /* ipv6 shared card related stuff */ dev->dev_id = real_dev->dev_id; -- cgit v0.10.2 From 6ab455eeaff6893cd06da33843e840d888cdc04a Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Mon, 19 May 2008 16:34:42 +1000 Subject: [XFS] Fix memory corruption with small buffer reads When we have multiple buffers in a single page for a blocksize == pagesize filesystem we might overwrite the page contents if two callers hit it shortly after each other. To prevent that we need to keep the page locked until I/O is completed and the page marked uptodate. Thanks to Eric Sandeen for triaging this bug and finding a reproducible testcase and Dave Chinner for additional advice. This should fix kernel.org bz #10421. Tested-by: Eric Sandeen SGI-PV: 981813 SGI-Modid: xfs-linux-melb:xfs-kern:31173a Signed-off-by: Christoph Hellwig Signed-off-by: David Chinner Signed-off-by: Lachlan McIlroy diff --git a/fs/xfs/linux-2.6/xfs_buf.c b/fs/xfs/linux-2.6/xfs_buf.c index 5105015..98e0e86 100644 --- a/fs/xfs/linux-2.6/xfs_buf.c +++ b/fs/xfs/linux-2.6/xfs_buf.c @@ -387,6 +387,8 @@ _xfs_buf_lookup_pages( if (unlikely(page == NULL)) { if (flags & XBF_READ_AHEAD) { bp->b_page_count = i; + for (i = 0; i < bp->b_page_count; i++) + unlock_page(bp->b_pages[i]); return -ENOMEM; } @@ -416,17 +418,24 @@ _xfs_buf_lookup_pages( ASSERT(!PagePrivate(page)); if (!PageUptodate(page)) { page_count--; - if (blocksize < PAGE_CACHE_SIZE && !PagePrivate(page)) { + if (blocksize >= PAGE_CACHE_SIZE) { + if (flags & XBF_READ) + bp->b_flags |= _XBF_PAGE_LOCKED; + } else if (!PagePrivate(page)) { if (test_page_region(page, offset, nbytes)) page_count++; } } - unlock_page(page); bp->b_pages[i] = page; offset = 0; } + if (!(bp->b_flags & _XBF_PAGE_LOCKED)) { + for (i = 0; i < bp->b_page_count; i++) + unlock_page(bp->b_pages[i]); + } + if (page_count == bp->b_page_count) bp->b_flags |= XBF_DONE; @@ -746,6 +755,7 @@ xfs_buf_associate_memory( bp->b_count_desired = len; bp->b_buffer_length = buflen; bp->b_flags |= XBF_MAPPED; + bp->b_flags &= ~_XBF_PAGE_LOCKED; return 0; } @@ -1093,8 +1103,10 @@ _xfs_buf_ioend( xfs_buf_t *bp, int schedule) { - if (atomic_dec_and_test(&bp->b_io_remaining) == 1) + if (atomic_dec_and_test(&bp->b_io_remaining) == 1) { + bp->b_flags &= ~_XBF_PAGE_LOCKED; xfs_buf_ioend(bp, schedule); + } } STATIC void @@ -1125,6 +1137,9 @@ xfs_buf_bio_end_io( if (--bvec >= bio->bi_io_vec) prefetchw(&bvec->bv_page->flags); + + if (bp->b_flags & _XBF_PAGE_LOCKED) + unlock_page(page); } while (bvec >= bio->bi_io_vec); _xfs_buf_ioend(bp, 1); @@ -1163,7 +1178,8 @@ _xfs_buf_ioapply( * filesystem block size is not smaller than the page size. */ if ((bp->b_buffer_length < PAGE_CACHE_SIZE) && - (bp->b_flags & XBF_READ) && + ((bp->b_flags & (XBF_READ|_XBF_PAGE_LOCKED)) == + (XBF_READ|_XBF_PAGE_LOCKED)) && (blocksize >= PAGE_CACHE_SIZE)) { bio = bio_alloc(GFP_NOIO, 1); diff --git a/fs/xfs/linux-2.6/xfs_buf.h b/fs/xfs/linux-2.6/xfs_buf.h index 841d788..f948ec7 100644 --- a/fs/xfs/linux-2.6/xfs_buf.h +++ b/fs/xfs/linux-2.6/xfs_buf.h @@ -66,6 +66,25 @@ typedef enum { _XBF_PAGES = (1 << 18), /* backed by refcounted pages */ _XBF_RUN_QUEUES = (1 << 19),/* run block device task queue */ _XBF_DELWRI_Q = (1 << 21), /* buffer on delwri queue */ + + /* + * Special flag for supporting metadata blocks smaller than a FSB. + * + * In this case we can have multiple xfs_buf_t on a single page and + * need to lock out concurrent xfs_buf_t readers as they only + * serialise access to the buffer. + * + * If the FSB size >= PAGE_CACHE_SIZE case, we have no serialisation + * between reads of the page. Hence we can have one thread read the + * page and modify it, but then race with another thread that thinks + * the page is not up-to-date and hence reads it again. + * + * The result is that the first modifcation to the page is lost. + * This sort of AGF/AGI reading race can happen when unlinking inodes + * that require truncation and results in the AGI unlinked list + * modifications being lost. + */ + _XBF_PAGE_LOCKED = (1 << 22), } xfs_buf_flags_t; typedef enum { -- cgit v0.10.2 From b6db80ee1331e7beaeb91b4b3d946dd16c72e388 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 18 May 2008 19:27:48 +0200 Subject: x86: fix setup of cyc2ns in tsc_64.c When the TSC is calibrated against the PIT due to the nonavailability of PMTIMER/HPET or due to SMI interference then the setup of the per CPU cyc2ns variables is skipped. This is unlikely to happen but it would definitely render sched_clock() unusable. This was introduced with commit 53d517cdbaac704352b3d0c10fecb99e0b54572e x86: scale cyc_2_nsec according to CPU frequency Update the per CPU cyc2ns variables in all exit pathes of tsc_calibrate. Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/arch/x86/kernel/tsc_64.c b/arch/x86/kernel/tsc_64.c index fcc16e5..1784b80 100644 --- a/arch/x86/kernel/tsc_64.c +++ b/arch/x86/kernel/tsc_64.c @@ -227,14 +227,14 @@ void __init tsc_calibrate(void) /* hpet or pmtimer available ? */ if (!hpet && !pm1 && !pm2) { printk(KERN_INFO "TSC calibrated against PIT\n"); - return; + goto out; } /* Check, whether the sampling was disturbed by an SMI */ if (tsc1 == ULONG_MAX || tsc2 == ULONG_MAX) { printk(KERN_WARNING "TSC calibration disturbed by SMI, " "using PIT calibration result\n"); - return; + goto out; } tsc2 = (tsc2 - tsc1) * 1000000L; @@ -255,6 +255,7 @@ void __init tsc_calibrate(void) tsc_khz = tsc2 / tsc1; +out: for_each_possible_cpu(cpu) set_cyc2ns_scale(tsc_khz, cpu); } -- cgit v0.10.2 From 9ccc906c97e34fd91dc6aaf5b69b52d824386910 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 13 May 2008 12:31:00 +0200 Subject: x86: distangle user disabled TSC from unstable tsc_enabled is set to 0 from the command line switch "notsc" and from the mark_tsc_unstable code. Seperate those functionalities and replace tsc_enable with tsc_disable. This makes also the native_sched_clock() decision when to use TSC understandable. Preparatory patch to solve the sched_clock() issue on 32 bit. Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index e479072..b087d69 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -14,7 +14,7 @@ #include "mach_timer.h" -static int tsc_enabled; +static int tsc_disabled; /* * On some systems the TSC frequency does not @@ -28,8 +28,8 @@ EXPORT_SYMBOL_GPL(tsc_khz); static int __init tsc_setup(char *str) { printk(KERN_WARNING "notsc: Kernel compiled with CONFIG_X86_TSC, " - "cannot disable TSC completely.\n"); - mark_tsc_unstable("user disabled TSC"); + "cannot disable TSC completely.\n"); + tsc_disabled = 1; return 1; } #else @@ -120,7 +120,7 @@ unsigned long long native_sched_clock(void) * very important for it to be as fast as the platform * can achive it. ) */ - if (unlikely(!tsc_enabled && !tsc_unstable)) + if (unlikely(tsc_disabled)) /* No locking but a rare wrong value is not a big deal: */ return (jiffies_64 - INITIAL_JIFFIES) * (1000000000 / HZ); @@ -322,7 +322,6 @@ void mark_tsc_unstable(char *reason) { if (!tsc_unstable) { tsc_unstable = 1; - tsc_enabled = 0; printk("Marking TSC unstable due to: %s.\n", reason); /* Can be called before registration */ if (clocksource_tsc.mult) @@ -336,7 +335,7 @@ EXPORT_SYMBOL_GPL(mark_tsc_unstable); static int __init dmi_mark_tsc_unstable(const struct dmi_system_id *d) { printk(KERN_NOTICE "%s detected: marking TSC unstable.\n", - d->ident); + d->ident); tsc_unstable = 1; return 0; } @@ -403,8 +402,11 @@ void __init tsc_init(void) { int cpu; - if (!cpu_has_tsc) + if (!cpu_has_tsc || tsc_disabled) { + /* Disable the TSC in case of !cpu_has_tsc */ + tsc_disabled = 1; return; + } cpu_khz = calculate_cpu_khz(); tsc_khz = cpu_khz; @@ -441,8 +443,6 @@ void __init tsc_init(void) if (check_tsc_unstable()) { clocksource_tsc.rating = 0; clocksource_tsc.flags &= ~CLOCK_SOURCE_IS_CONTINUOUS; - } else - tsc_enabled = 1; - + } clocksource_register(&clocksource_tsc); } -- cgit v0.10.2 From 74dc51a3de06aa516e3b9fdc4017b2aeb38bf44b Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Sun, 18 May 2008 22:17:59 +0200 Subject: x86: disable TSC for sched_clock() when calibration failed When the TSC calibration fails then TSC is still used in sched_clock(). Disable it completely in that case. Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index b087d69..068759d 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -413,6 +413,11 @@ void __init tsc_init(void) if (!cpu_khz) { mark_tsc_unstable("could not calculate TSC khz"); + /* + * We need to disable the TSC completely in this case + * to prevent sched_clock() from using it. + */ + tsc_disabled = 1; return; } -- cgit v0.10.2 From 2584a82deed7196f48066f1b1a7fad4ec5bea961 Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Tue, 20 May 2008 18:18:12 -0400 Subject: x86: don't read maxlvt before checking if APIC is mapped A check for unmapped apic was added before reading maxlvt but the early read of maxlvt wasn't removed. Signed-off-by: Chuck Ebbert Cc: Andi Kleen Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 5910020..0633cfd 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -534,7 +534,7 @@ int setup_profiling_timer(unsigned int multiplier) */ void clear_local_APIC(void) { - int maxlvt = lapic_get_maxlvt(); + int maxlvt; u32 v; /* APIC hasn't been mapped yet */ -- cgit v0.10.2 From de067814d6b69030d0030e1c5b3dbaf0385aae41 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Thu, 15 May 2008 13:24:52 +0100 Subject: x86/xen: fix arbitrary_virt_to_machine() While I realize that the function isn't currently being used, I still think an obvious mistake like this should be corrected. Signed-off-by: Jan Beulich Acked-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 126766d..3525ef5 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -60,7 +60,7 @@ xmaddr_t arbitrary_virt_to_machine(unsigned long address) { unsigned int level; pte_t *pte = lookup_address(address, &level); - unsigned offset = address & PAGE_MASK; + unsigned offset = address & ~PAGE_MASK; BUG_ON(pte == NULL); -- cgit v0.10.2 From 2ddfd20e7c55421435cbf95a5ed3dd6e423cf934 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 22 May 2008 10:37:48 +0200 Subject: namespacecheck: automated fixes Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 4bc1be5..08a3098 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -53,7 +53,7 @@ static cycle_t kvm_clock_read(void); * have elapsed since the hypervisor wrote the data. So we try to account for * that with system time */ -unsigned long kvm_get_wallclock(void) +static unsigned long kvm_get_wallclock(void) { u32 wc_sec, wc_nsec; u64 delta; @@ -86,7 +86,7 @@ unsigned long kvm_get_wallclock(void) return ts.tv_sec + 1; } -int kvm_set_wallclock(unsigned long now) +static int kvm_set_wallclock(unsigned long now) { return 0; } diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 36c5406..7246b60 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1996,7 +1996,7 @@ static struct shrinker mmu_shrinker = { .seeks = DEFAULT_SEEKS * 10, }; -void mmu_destroy_caches(void) +static void mmu_destroy_caches(void) { if (pte_chain_cache) kmem_cache_destroy(pte_chain_cache); -- cgit v0.10.2 From a1289643adb6272c04db9399653ae195072c482a Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 14 May 2008 16:10:42 -0700 Subject: x86: use explicit copy in vdso_gettimeofday() Jeremy's gcc 3.4 seems to be unable to inline a 8 byte memcpy. But the vdso doesn't support external references. Copy the structure members of struct timezone explicitely instead. Signed-off-by: Andi Kleen Cc: Jeremy Fitzhardinge Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index 23476c2..efa2ba7 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -106,9 +106,9 @@ int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) do_realtime((struct timespec *)tv); tv->tv_usec /= 1000; if (unlikely(tz != NULL)) { - /* This relies on gcc inlining the memcpy. We'll notice - if it ever fails to do so. */ - memcpy(tz, >od->sys_tz, sizeof(struct timezone)); + /* Avoid memcpy. Some old compilers fail to inline it */ + tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest; + tz->tz_dsttime = gtod->sys_tz.tz_dsttime; } return 0; } -- cgit v0.10.2 From 50346e621252617a07eb800dfa3f876ccd52d534 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 23 May 2008 07:16:52 +0100 Subject: [ARM] 5051/1: define pgtable_t for the !CONFIG_MMU case too The non-MMU case also needs the type definition of pgtable_t. So move it out of a CONFIG_MMU conditional section. Signed-off-by: Greg Ungerer Signed-off-by: Russell King diff --git a/include/asm-arm/page.h b/include/asm-arm/page.h index 5c22b01..8e05bdb 100644 --- a/include/asm-arm/page.h +++ b/include/asm-arm/page.h @@ -179,10 +179,10 @@ typedef unsigned long pgprot_t; #endif /* STRICT_MM_TYPECHECKS */ -typedef struct page *pgtable_t; - #endif /* CONFIG_MMU */ +typedef struct page *pgtable_t; + #include #endif /* !__ASSEMBLY__ */ -- cgit v0.10.2 From 66aaeff1c27545909e502546120be2c5432394e3 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 23 May 2008 08:26:24 +0100 Subject: [ARM] 5052/1: export clock functions for the at91x40 Export the AT91 clock functions for the AT91X40. Some external code common to all AT91 family parts relys on this, like the gpio and serial support. Signed-off-by: Greg Ungerer Signed-off-by: Russell King diff --git a/arch/arm/mach-at91/at91x40.c b/arch/arm/mach-at91/at91x40.c index 1de121f..f446477 100644 --- a/arch/arm/mach-at91/at91x40.c +++ b/arch/arm/mach-at91/at91x40.c @@ -16,16 +16,32 @@ #include #include #include +#include #include "generic.h" /* - * This is used in the gpio code, stub locally. + * Export the clock functions for the AT91X40. Some external code common + * to all AT91 family parts relys on this, like the gpio and serial support. */ int clk_enable(struct clk *clk) { return 0; } +void clk_disable(struct clk *clk) +{ +} + +unsigned long clk_get_rate(struct clk *clk) +{ + return AT91X40_MASTER_CLOCK; +} + +struct clk *clk_get(struct device *dev, const char *id) +{ + return NULL; +} + void __init at91x40_initialize(unsigned long main_clock) { at91_extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1) -- cgit v0.10.2 From 415ad1e50abcc86c235a42fbab57f2b6134412d7 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Fri, 23 May 2008 08:31:39 +0100 Subject: [ARM] 5053/1: define before use of processor_id For the simple read_cpuid() macro case the variable processor_id has no definition on use of the macro. Add an extern for it. Move all the processor ID macros into the #ifndef __ASSEMBLEY__ block. Signed-off-by: Greg Ungerer Signed-off-by: Russell King diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h index 6335de9..514af79 100644 --- a/include/asm-arm/system.h +++ b/include/asm-arm/system.h @@ -48,20 +48,6 @@ #define CPUID_TCM 2 #define CPUID_TLBTYPE 3 -#ifdef CONFIG_CPU_CP15 -#define read_cpuid(reg) \ - ({ \ - unsigned int __val; \ - asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \ - : "=r" (__val) \ - : \ - : "cc"); \ - __val; \ - }) -#else -#define read_cpuid(reg) (processor_id) -#endif - /* * This is used to ensure the compiler did actually allocate the register we * asked it for some inline assembly sequences. Apparently we can't trust @@ -78,6 +64,21 @@ #include #include +#ifdef CONFIG_CPU_CP15 +#define read_cpuid(reg) \ + ({ \ + unsigned int __val; \ + asm("mrc p15, 0, %0, c0, c0, " __stringify(reg) \ + : "=r" (__val) \ + : \ + : "cc"); \ + __val; \ + }) +#else +extern unsigned int processor_id; +#define read_cpuid(reg) (processor_id) +#endif + /* * The CPU ID never changes at run time, so we might as well tell the * compiler that it's constant. Use this function to read the CPU ID -- cgit v0.10.2 From 2a740d7a64807acaceb7e44ccf50df35107a34ab Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 May 2008 13:53:31 +0100 Subject: Revert "[ARM] pxa: spitz wants PXA27x UDC definitions" This reverts commit 53491e042e79578765e2d33512a45d50eb0d8801, which hit the kernel tree too early. Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c index dace382..e7d0fcd 100644 --- a/arch/arm/mach-pxa/spitz.c +++ b/arch/arm/mach-pxa/spitz.c @@ -38,7 +38,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From cfb41bf756cac168c829e27def36072dbfbe6fd0 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 May 2008 15:38:07 +0100 Subject: [ARM] fix OMAP include loops OMAP has two include loops in its header files: asm-arm/hardware.h <- asm-arm/arch-omap/io.h <- asm-arm/arch-omap/hardware.h <- asm-arm/hardware.h asm-arm/arch-omap/board-palmte.h <- asm-arm/arch-omap/hardware.h <- asm-arm/hardware.h <- asm-arm/arch-omap/gpio.h <- asm-arm/arch-omap/board-palmte.h Circular include dependencies are dangerous since they can result in inconsistent definitions being provided to other code, especially if '#ifndef' constructs are used. Solve these by removing the offending includes, and add additional includes where necessary. Acked-by: Tony Lindgren Signed-off-by: Russell King diff --git a/include/asm-arm/arch-omap/board-palmte.h b/include/asm-arm/arch-omap/board-palmte.h index cd22035..6fac2c8 100644 --- a/include/asm-arm/arch-omap/board-palmte.h +++ b/include/asm-arm/arch-omap/board-palmte.h @@ -14,8 +14,6 @@ #ifndef __OMAP_BOARD_PALMTE_H #define __OMAP_BOARD_PALMTE_H -#include - #define PALMTE_USBDETECT_GPIO 0 #define PALMTE_USB_OR_DC_GPIO 1 #define PALMTE_TSC_GPIO 4 diff --git a/include/asm-arm/arch-omap/entry-macro.S b/include/asm-arm/arch-omap/entry-macro.S index 74cd572..369093a 100644 --- a/include/asm-arm/arch-omap/entry-macro.S +++ b/include/asm-arm/arch-omap/entry-macro.S @@ -8,6 +8,7 @@ * warranty of any kind, whether express or implied. */ #include +#include #include #if defined(CONFIG_ARCH_OMAP1) diff --git a/include/asm-arm/arch-omap/gpio.h b/include/asm-arm/arch-omap/gpio.h index 86621a0..5ee6a49 100644 --- a/include/asm-arm/arch-omap/gpio.h +++ b/include/asm-arm/arch-omap/gpio.h @@ -26,7 +26,6 @@ #ifndef __ASM_ARCH_OMAP_GPIO_H #define __ASM_ARCH_OMAP_GPIO_H -#include #include #include diff --git a/include/asm-arm/arch-omap/hardware.h b/include/asm-arm/arch-omap/hardware.h index da57209..91d85b3 100644 --- a/include/asm-arm/arch-omap/hardware.h +++ b/include/asm-arm/arch-omap/hardware.h @@ -41,7 +41,6 @@ #include #include #endif -#include #include /* -- cgit v0.10.2 From 7fafd91d85181e946207bed18c44addc47e36c63 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:06 -0700 Subject: x86: fix integer as NULL pointer warning arch/x86/boot/printf.c:59:10: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds diff --git a/arch/x86/boot/printf.c b/arch/x86/boot/printf.c index c1d00c02..50e47cd 100644 --- a/arch/x86/boot/printf.c +++ b/arch/x86/boot/printf.c @@ -56,7 +56,7 @@ static char *number(char *str, long num, int base, int size, int precision, if (type & LEFT) type &= ~ZEROPAD; if (base < 2 || base > 36) - return 0; + return NULL; c = (type & ZEROPAD) ? '0' : ' '; sign = 0; if (type & SIGN) { -- cgit v0.10.2 From b62151de496d26a705942b945fab9cecdb3fb8da Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:06 -0700 Subject: acpi: fix integer as NULL pointer warning drivers/acpi/dispatcher/dsmethod.c:568:50: warning: Using plain integer as NULL pointer drivers/acpi/executer/exmutex.c:329:30: warning: Using plain integer as NULL pointer drivers/acpi/executer/exmutex.c:466:31: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/dispatcher/dsmethod.c b/drivers/acpi/dispatcher/dsmethod.c index e48a3ea..2509809 100644 --- a/drivers/acpi/dispatcher/dsmethod.c +++ b/drivers/acpi/dispatcher/dsmethod.c @@ -565,7 +565,7 @@ acpi_ds_terminate_control_method(union acpi_operand_object *method_desc, acpi_os_release_mutex(method_desc->method. mutex->mutex.os_mutex); - method_desc->method.mutex->mutex.thread_id = 0; + method_desc->method.mutex->mutex.thread_id = NULL; } } diff --git a/drivers/acpi/executer/exmutex.c b/drivers/acpi/executer/exmutex.c index c873ab4..a8bf3d7 100644 --- a/drivers/acpi/executer/exmutex.c +++ b/drivers/acpi/executer/exmutex.c @@ -326,7 +326,7 @@ acpi_status acpi_ex_release_mutex_object(union acpi_operand_object *obj_desc) /* Clear mutex info */ - obj_desc->mutex.thread_id = 0; + obj_desc->mutex.thread_id = NULL; return_ACPI_STATUS(status); } @@ -463,7 +463,7 @@ void acpi_ex_release_all_mutexes(struct acpi_thread_state *thread) /* Mark mutex unowned */ obj_desc->mutex.owner_thread = NULL; - obj_desc->mutex.thread_id = 0; + obj_desc->mutex.thread_id = NULL; /* Update Thread sync_level (Last mutex is the important one) */ -- cgit v0.10.2 From 94b5e0ac694baba20efbe7d8ce6ff9cbe1776162 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:07 -0700 Subject: isdn: fix integer as NULL pointer warning drivers/isdn/hysdn/hycapi.c:465:42: warning: Using plain integer as NULL pointer drivers/isdn/hysdn/hycapi.c:467:44: warning: Using plain integer as NULL pointer drivers/isdn/hysdn/hycapi.c:469:42: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds diff --git a/drivers/isdn/hysdn/hycapi.c b/drivers/isdn/hysdn/hycapi.c index d3999a8..53f6ad1 100644 --- a/drivers/isdn/hysdn/hycapi.c +++ b/drivers/isdn/hysdn/hycapi.c @@ -462,11 +462,11 @@ static int hycapi_read_proc(char *page, char **start, off_t off, default: s = "???"; break; } len += sprintf(page+len, "%-16s %s\n", "type", s); - if ((s = cinfo->version[VER_DRIVER]) != 0) + if ((s = cinfo->version[VER_DRIVER]) != NULL) len += sprintf(page+len, "%-16s %s\n", "ver_driver", s); - if ((s = cinfo->version[VER_CARDTYPE]) != 0) + if ((s = cinfo->version[VER_CARDTYPE]) != NULL) len += sprintf(page+len, "%-16s %s\n", "ver_cardtype", s); - if ((s = cinfo->version[VER_SERIAL]) != 0) + if ((s = cinfo->version[VER_SERIAL]) != NULL) len += sprintf(page+len, "%-16s %s\n", "ver_serial", s); len += sprintf(page+len, "%-16s %s\n", "cardname", cinfo->cardname); -- cgit v0.10.2 From 9bcf091083065c751a4d90317b766370d2497ae9 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:07 -0700 Subject: scsi: fix integer as NULL pointer warning drivers/scsi/aha152x.c:3585:60: warning: Using plain integer as NULL pointer drivers/scsi/aha152x.c:3845:56: warning: Using plain integer as NULL pointer drivers/scsi/qla1280.c:2814:37: warning: Using plain integer as NULL pointer drivers/scsi/atp870u.c:750:47: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1281:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1293:36: warning: Using plain integer as NULL pointer drivers/scsi/3w-9xxx.c:1301:35: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:447:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:457:10: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:479:24: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:483:22: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1213:23: warning: Using plain integer as NULL pointer drivers/scsi/hptiop.c:1214:23: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c index b31faec..867f6fd 100644 --- a/drivers/scsi/3w-9xxx.c +++ b/drivers/scsi/3w-9xxx.c @@ -1278,7 +1278,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) error = 0; /* Check for command packet errors */ if (full_command_packet->command.newcommand.status != 0) { - if (tw_dev->srb[request_id] != 0) { + if (tw_dev->srb[request_id] != NULL) { error = twa_fill_sense(tw_dev, request_id, 1, 1); } else { /* Skip ioctl error prints */ @@ -1290,7 +1290,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) /* Check for correct state */ if (tw_dev->state[request_id] != TW_S_POSTED) { - if (tw_dev->srb[request_id] != 0) { + if (tw_dev->srb[request_id] != NULL) { TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1a, "Received a request id that wasn't posted"); TW_CLEAR_ALL_INTERRUPTS(tw_dev); goto twa_interrupt_bail; @@ -1298,7 +1298,7 @@ static irqreturn_t twa_interrupt(int irq, void *dev_instance) } /* Check for internal command completion */ - if (tw_dev->srb[request_id] == 0) { + if (tw_dev->srb[request_id] == NULL) { if (request_id != tw_dev->chrdev_request_id) { if (twa_aen_complete(tw_dev, request_id)) TW_PRINTK(tw_dev->host, TW_DRIVER, 0x1b, "Error completing AEN during attention interrupt"); diff --git a/drivers/scsi/aha152x.c b/drivers/scsi/aha152x.c index 1dca177..0899cb6 100644 --- a/drivers/scsi/aha152x.c +++ b/drivers/scsi/aha152x.c @@ -3582,7 +3582,7 @@ static int checksetup(struct aha152x_setup *setup) if (i == ARRAY_SIZE(ports)) return 0; - if ( request_region(setup->io_port, IO_RANGE, "aha152x")==0 ) { + if (!request_region(setup->io_port, IO_RANGE, "aha152x")) { printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port); return 0; } @@ -3842,7 +3842,7 @@ static int __init aha152x_init(void) if ((setup_count == 1) && (setup[0].io_port == ports[i])) continue; - if ( request_region(ports[i], IO_RANGE, "aha152x")==0 ) { + if (!request_region(ports[i], IO_RANGE, "aha152x")) { printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]); continue; } diff --git a/drivers/scsi/atp870u.c b/drivers/scsi/atp870u.c index db6de5e..7d31154 100644 --- a/drivers/scsi/atp870u.c +++ b/drivers/scsi/atp870u.c @@ -747,7 +747,7 @@ static void send_s870(struct atp_unit *dev,unsigned char c) dev->quhd[c] = 0; } workreq = dev->quereq[c][dev->quhd[c]]; - if (dev->id[c][scmd_id(workreq)].curr_req == 0) { + if (dev->id[c][scmd_id(workreq)].curr_req == NULL) { dev->id[c][scmd_id(workreq)].curr_req = workreq; dev->last_cmd[c] = scmd_id(workreq); goto cmd_subp; diff --git a/drivers/scsi/hptiop.c b/drivers/scsi/hptiop.c index aaa48e0..da876d3 100644 --- a/drivers/scsi/hptiop.c +++ b/drivers/scsi/hptiop.c @@ -444,7 +444,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) if (!(pci_resource_flags(pcidev, index) & IORESOURCE_MEM)) { printk(KERN_ERR "scsi%d: pci resource invalid\n", hba->host->host_no); - return 0; + return NULL; } mem_base_phy = pci_resource_start(pcidev, index); @@ -454,7 +454,7 @@ static void __iomem *hptiop_map_pci_bar(struct hptiop_hba *hba, int index) if (!mem_base_virt) { printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n", hba->host->host_no); - return 0; + return NULL; } return mem_base_virt; } @@ -476,11 +476,11 @@ static void hptiop_unmap_pci_bar_itl(struct hptiop_hba *hba) static int hptiop_map_pci_bar_mv(struct hptiop_hba *hba) { hba->u.mv.regs = hptiop_map_pci_bar(hba, 0); - if (hba->u.mv.regs == 0) + if (hba->u.mv.regs == NULL) return -1; hba->u.mv.mu = hptiop_map_pci_bar(hba, 2); - if (hba->u.mv.mu == 0) { + if (hba->u.mv.mu == NULL) { iounmap(hba->u.mv.regs); return -1; } @@ -1210,8 +1210,8 @@ static void hptiop_remove(struct pci_dev *pcidev) static struct hptiop_adapter_ops hptiop_itl_ops = { .iop_wait_ready = iop_wait_ready_itl, - .internal_memalloc = 0, - .internal_memfree = 0, + .internal_memalloc = NULL, + .internal_memfree = NULL, .map_pci_bar = hptiop_map_pci_bar_itl, .unmap_pci_bar = hptiop_unmap_pci_bar_itl, .enable_intr = hptiop_enable_intr_itl, diff --git a/drivers/scsi/qla1280.c b/drivers/scsi/qla1280.c index 51e2f29..3754ab8 100644 --- a/drivers/scsi/qla1280.c +++ b/drivers/scsi/qla1280.c @@ -2811,7 +2811,7 @@ qla1280_64bit_start_scsi(struct scsi_qla_host *ha, struct srb * sp) /* Check for room in outstanding command list. */ for (cnt = 0; cnt < MAX_OUTSTANDING_COMMANDS && - ha->outstanding_cmds[cnt] != 0; cnt++); + ha->outstanding_cmds[cnt] != NULL; cnt++); if (cnt >= MAX_OUTSTANDING_COMMANDS) { status = 1; -- cgit v0.10.2 From 5e2daeb3c982ea19ecad0c2e720a4052034be14b Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 22 May 2008 15:45:08 -0700 Subject: fbdev: fix integer as NULL pointer warning drivers/video/aty/atyfb_base.c:3359:26: warning: Using plain integer as NULL pointer drivers/video/aty/radeon_base.c:2280:32: warning: Using plain integer as NULL pointer drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer drivers/video/matrox/matroxfb_base.h:203:25: warning: Using plain integer as NULL pointer drivers/video/sis/sis_main.c:5790:44: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison Signed-off-by: Linus Torvalds diff --git a/drivers/video/aty/atyfb_base.c b/drivers/video/aty/atyfb_base.c index e4bcf53..bd4ac0b 100644 --- a/drivers/video/aty/atyfb_base.c +++ b/drivers/video/aty/atyfb_base.c @@ -3356,7 +3356,7 @@ static int __devinit atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *i info->fix.mmio_start = raddr; par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000); - if (par->ati_regbase == 0) + if (par->ati_regbase == NULL) return -ENOMEM; info->fix.mmio_start += par->aux_start ? 0x400 : 0xc00; diff --git a/drivers/video/aty/radeon_base.c b/drivers/video/aty/radeon_base.c index 72cd0d2..400e926 100644 --- a/drivers/video/aty/radeon_base.c +++ b/drivers/video/aty/radeon_base.c @@ -2277,8 +2277,8 @@ static int __devinit radeonfb_pci_register (struct pci_dev *pdev, do { rinfo->fb_base = ioremap (rinfo->fb_base_phys, rinfo->mapped_vram); - } while ( rinfo->fb_base == 0 && - ((rinfo->mapped_vram /=2) >= MIN_MAPPED_VRAM) ); + } while (rinfo->fb_base == NULL && + ((rinfo->mapped_vram /= 2) >= MIN_MAPPED_VRAM)); if (rinfo->fb_base == NULL) { printk (KERN_ERR "radeonfb (%s): cannot map FB\n", diff --git a/drivers/video/matrox/matroxfb_base.h b/drivers/video/matrox/matroxfb_base.h index f3107ad..9588323 100644 --- a/drivers/video/matrox/matroxfb_base.h +++ b/drivers/video/matrox/matroxfb_base.h @@ -200,7 +200,7 @@ static inline int mga_ioremap(unsigned long phys, unsigned long size, int flags, virt->vaddr = ioremap_nocache(phys, size); else virt->vaddr = ioremap(phys, size); - return (virt->vaddr == 0); /* 0, !0... 0, error_code in future */ + return (virt->vaddr == NULL); /* 0, !0... 0, error_code in future */ } static inline void mga_iounmap(vaddr_t va) { diff --git a/drivers/video/sis/sis_main.c b/drivers/video/sis/sis_main.c index 7380362..b934384 100644 --- a/drivers/video/sis/sis_main.c +++ b/drivers/video/sis/sis_main.c @@ -5787,7 +5787,7 @@ sisfb_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } else { struct sis_video_info *countvideo = card_list; ivideo->cardnumber = 1; - while((countvideo = countvideo->next) != 0) + while((countvideo = countvideo->next) != NULL) ivideo->cardnumber++; } -- cgit v0.10.2 From 57f7bd5b455298dbe94227aa1fedbbfe63bbf252 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Fri, 23 May 2008 08:40:45 -0700 Subject: remove debug printk from DRM suspend path Not sure how this snuck upstream, but it really doesn't belong there. We don't need a KERN_ERR printk in the suspend path to know what's going on (at least not anymore). Signed-off-by: Jesse Barnes Signed-off-by: Linus Torvalds diff --git a/drivers/char/drm/drm_sysfs.c b/drivers/char/drm/drm_sysfs.c index 9a32169..af211a0 100644 --- a/drivers/char/drm/drm_sysfs.c +++ b/drivers/char/drm/drm_sysfs.c @@ -34,8 +34,6 @@ static int drm_sysfs_suspend(struct device *dev, pm_message_t state) struct drm_minor *drm_minor = to_drm_minor(dev); struct drm_device *drm_dev = drm_minor->dev; - printk(KERN_ERR "%s\n", __func__); - if (drm_dev->driver->suspend) return drm_dev->driver->suspend(drm_dev, state); -- cgit v0.10.2 From b1979a5fda7869a790f4fd83fb06c78498d26ba1 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 21:21:15 +0200 Subject: x86: prevent PGE flush from interruption/preemption CR4 manipulation is not protected against interrupts and preemption, but KVM uses smp_function_call to manipulate the X86_CR4_VMXE bit either from the CPU hotplug code or from the kvm_init call. We need to protect the CR4 manipulation from both interrupts and preemption. Original bug report: http://lkml.org/lkml/2008/5/7/48 Bugzilla entry: http://bugzilla.kernel.org/show_bug.cgi?id=10642 This is not a regression from 2.6.25, it's a long standing and hard to trigger bug. Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/include/asm-x86/tlbflush.h b/include/asm-x86/tlbflush.h index 0c0674d..35c76ce 100644 --- a/include/asm-x86/tlbflush.h +++ b/include/asm-x86/tlbflush.h @@ -22,12 +22,23 @@ static inline void __native_flush_tlb(void) static inline void __native_flush_tlb_global(void) { - unsigned long cr4 = read_cr4(); + unsigned long flags; + unsigned long cr4; + /* + * Read-modify-write to CR4 - protect it from preemption and + * from interrupts. (Use the raw variant because this code can + * be called from deep inside debugging code.) + */ + raw_local_irq_save(flags); + + cr4 = read_cr4(); /* clear PGE */ write_cr4(cr4 & ~X86_CR4_PGE); /* write old PGE again and flush TLBs */ write_cr4(cr4); + + raw_local_irq_restore(flags); } static inline void __native_flush_tlb_single(unsigned long addr) -- cgit v0.10.2 From aaa9bbe039febf1d3a0f3a374deea0680d9f5758 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 17:38:32 +0000 Subject: [CIFS] remove unused variables CC: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h index 0891405..9cfcf32 100644 --- a/fs/cifs/cifsglob.h +++ b/fs/cifs/cifsglob.h @@ -333,7 +333,6 @@ struct cifsFileInfo { bool messageMode:1; /* for pipes: message vs byte mode */ atomic_t wrtPending; /* handle in use - defer close */ struct semaphore fh_sem; /* prevents reopen race after dead ses*/ - char *search_resume_name; /* BB removeme BB */ struct cifs_search_info srch_inf; }; @@ -626,7 +625,7 @@ GLOBAL_EXTERN atomic_t tcpSesAllocCount; GLOBAL_EXTERN atomic_t tcpSesReconnectCount; GLOBAL_EXTERN atomic_t tconInfoReconnectCount; -/* Various Debug counters to remove someday (BB) */ +/* Various Debug counters */ GLOBAL_EXTERN atomic_t bufAllocCount; /* current number allocated */ #ifdef CONFIG_CIFS_STATS2 GLOBAL_EXTERN atomic_t totBufAllocCount; /* total allocated over all time */ diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9b8b4cf..174bf8a 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -1728,7 +1728,7 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, { int rc = 0; LOCK_REQ *pSMB = NULL; - LOCK_RSP *pSMBr = NULL; +/* LOCK_RSP *pSMBr = NULL; */ /* No response data other than rc to parse */ int bytes_returned; int timeout = 0; __u16 count; @@ -1739,8 +1739,6 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, if (rc) return rc; - pSMBr = (LOCK_RSP *)pSMB; /* BB removeme BB */ - if (lockType == LOCKING_ANDX_OPLOCK_RELEASE) { timeout = CIFS_ASYNC_OP; /* no response expected */ pSMB->Timeout = 0; @@ -1774,7 +1772,7 @@ CIFSSMBLock(const int xid, struct cifsTconInfo *tcon, if (waitFlag) { rc = SendReceiveBlockingLock(xid, tcon, (struct smb_hdr *) pSMB, - (struct smb_hdr *) pSMBr, &bytes_returned); + (struct smb_hdr *) pSMB, &bytes_returned); cifs_small_buf_release(pSMB); } else { rc = SendReceiveNoRsp(xid, tcon->ses, (struct smb_hdr *)pSMB, diff --git a/fs/cifs/file.c b/fs/cifs/file.c index 8636cec..0aac824 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -546,7 +546,6 @@ int cifs_close(struct inode *inode, struct file *file) msleep(timeout); timeout *= 8; } - kfree(pSMBFile->search_resume_name); kfree(file->private_data); file->private_data = NULL; } else @@ -605,12 +604,6 @@ int cifs_closedir(struct inode *inode, struct file *file) else cifs_buf_release(ptmp); } - ptmp = pCFileStruct->search_resume_name; - if (ptmp) { - cFYI(1, ("closedir free resume name")); - pCFileStruct->search_resume_name = NULL; - kfree(ptmp); - } kfree(file->private_data); file->private_data = NULL; } diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c index 1d69b80..4b17f8f 100644 --- a/fs/cifs/misc.c +++ b/fs/cifs/misc.c @@ -519,8 +519,7 @@ is_valid_oplock_break(struct smb_hdr *buf, struct TCP_Server_Info *srv) pnotify = (struct file_notify_information *) ((char *)&pSMBr->hdr.Protocol + data_offset); cFYI(1, ("dnotify on %s Action: 0x%x", - pnotify->FileName, - pnotify->Action)); /* BB removeme BB */ + pnotify->FileName, pnotify->Action)); /* cifs_dump_mem("Rcvd notify Data: ",buf, sizeof(struct smb_hdr)+60); */ return true; diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index 713c251..df2c3c4 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -675,8 +675,6 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon, cifsFile->invalidHandle = true; CIFSFindClose(xid, pTcon, cifsFile->netfid); } - kfree(cifsFile->search_resume_name); - cifsFile->search_resume_name = NULL; if (cifsFile->srch_inf.ntwrk_buf_start) { cFYI(1, ("freeing SMB ff cache buf on search rewind")); if (cifsFile->srch_inf.smallBuf) @@ -1043,9 +1041,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir) } /* else { cifsFile->invalidHandle = true; CIFSFindClose(xid, pTcon, cifsFile->netfid); - } - kfree(cifsFile->search_resume_name); - cifsFile->search_resume_name = NULL; */ + } */ rc = find_cifs_entry(xid, pTcon, file, ¤t_entry, &num_to_fill); -- cgit v0.10.2 From 5a4f2b675210718aceb4abf41617a3af31bba718 Mon Sep 17 00:00:00 2001 From: Dave Olson Date: Fri, 23 May 2008 10:52:59 -0700 Subject: IB/mad: Fix kernel crash when .process_mad() returns SUCCESS|CONSUMED If a low-level driver returns IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED, handle_outgoing_dr_smp() doesn't clean up properly. The fix is to kfree the local data and break, rather than falling through. This was observed with the ipath driver, but could happen with any driver. This fixes . Signed-off-by: Dave Olson Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/mad.c b/drivers/infiniband/core/mad.c index fbe16d5..1adf2ef 100644 --- a/drivers/infiniband/core/mad.c +++ b/drivers/infiniband/core/mad.c @@ -747,7 +747,9 @@ static int handle_outgoing_dr_smp(struct ib_mad_agent_private *mad_agent_priv, break; case IB_MAD_RESULT_SUCCESS | IB_MAD_RESULT_CONSUMED: kmem_cache_free(ib_mad_cache, mad_priv); - break; + kfree(local); + ret = 1; + goto out; case IB_MAD_RESULT_SUCCESS: /* Treat like an incoming receive MAD */ port_priv = ib_get_mad_port(mad_agent_priv->agent.device, -- cgit v0.10.2 From 4468eb3fd102cad559e51594a01cbc65b994d264 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:31:40 -0400 Subject: on non-posix shares, clear write bits in mode when ATTR_READONLY is set When mounting a share with posix extensions disabled, cifs_get_inode_info turns off all the write bits in the mode for regular files if ATTR_READONLY is set. Directories and other inode types, however, can also have ATTR_READONLY set, but the mode gives no indication of this. This patch makes this apply to other inode types besides regular files. It also cleans up how modes are set in cifs_get_inode_info for both the "normal" and "dynperm" cases. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 129dbfe..ae5bcaf 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -418,6 +418,7 @@ int cifs_get_inode_info(struct inode **pinode, char *buf = NULL; bool adjustTZ = false; bool is_dfs_referral = false; + umode_t default_mode; pTcon = cifs_sb->tcon; cFYI(1, ("Getting info on %s", full_path)); @@ -530,47 +531,42 @@ int cifs_get_inode_info(struct inode **pinode, inode->i_mtime.tv_sec += pTcon->ses->server->timeAdj; } - /* set default mode. will override for dirs below */ - if (atomic_read(&cifsInfo->inUse) == 0) - /* new inode, can safely set these fields */ - inode->i_mode = cifs_sb->mnt_file_mode; - else /* since we set the inode type below we need to mask off - to avoid strange results if type changes and both - get orred in */ - inode->i_mode &= ~S_IFMT; -/* if (attr & ATTR_REPARSE) */ - /* We no longer handle these as symlinks because we could not - follow them due to the absolute path with drive letter */ - if (attr & ATTR_DIRECTORY) { - /* override default perms since we do not do byte range locking - on dirs */ - inode->i_mode = cifs_sb->mnt_dir_mode; - inode->i_mode |= S_IFDIR; - } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) && - (cifsInfo->cifsAttrs & ATTR_SYSTEM) && - /* No need to le64 convert size of zero */ - (pfindData->EndOfFile == 0)) { - inode->i_mode = cifs_sb->mnt_file_mode; - inode->i_mode |= S_IFIFO; -/* BB Finish for SFU style symlinks and devices */ - } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) && - (cifsInfo->cifsAttrs & ATTR_SYSTEM)) { - if (decode_sfu_inode(inode, le64_to_cpu(pfindData->EndOfFile), - full_path, cifs_sb, xid)) - cFYI(1, ("Unrecognized sfu inode type")); - - cFYI(1, ("sfu mode 0%o", inode->i_mode)); + /* get default inode mode */ + if (attr & ATTR_DIRECTORY) + default_mode = cifs_sb->mnt_dir_mode; + else + default_mode = cifs_sb->mnt_file_mode; + + /* set permission bits */ + if (atomic_read(&cifsInfo->inUse) == 0 || + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) + inode->i_mode = default_mode; + else { + /* just reenable write bits if !ATTR_READONLY */ + if ((inode->i_mode & S_IWUGO) == 0 && + (attr & ATTR_READONLY) == 0) + inode->i_mode |= (S_IWUGO & default_mode); + inode->i_mode &= ~S_IFMT; + } + /* clear write bits if ATTR_READONLY is set */ + if (attr & ATTR_READONLY) + inode->i_mode &= ~S_IWUGO; + + /* set inode type */ + if ((attr & ATTR_SYSTEM) && + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) { + /* no need to fix endianness on 0 */ + if (pfindData->EndOfFile == 0) + inode->i_mode |= S_IFIFO; + else if (decode_sfu_inode(inode, + le64_to_cpu(pfindData->EndOfFile), + full_path, cifs_sb, xid)) + cFYI(1, ("unknown SFU file type\n")); } else { - inode->i_mode |= S_IFREG; - /* treat dos attribute of read-only as read-only mode eg 555 */ - if (cifsInfo->cifsAttrs & ATTR_READONLY) - inode->i_mode &= ~(S_IWUGO); - else if ((inode->i_mode & S_IWUGO) == 0) - /* the ATTR_READONLY flag may have been */ - /* changed on server -- set any w bits */ - /* allowed by mnt_file_mode */ - inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode); - /* BB add code to validate if device or weird share or device type? */ + if (attr & ATTR_DIRECTORY) + inode->i_mode |= S_IFDIR; + else + inode->i_mode |= S_IFREG; } spin_lock(&inode->i_lock); diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index df2c3c4..83f3069 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -132,6 +132,7 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type, __u32 attr; __u64 allocation_size; __u64 end_of_file; + umode_t default_mode; /* save mtime and size */ local_mtime = tmp_inode->i_mtime; @@ -187,48 +188,54 @@ static void fill_in_inode(struct inode *tmp_inode, int new_buf_type, if (atomic_read(&cifsInfo->inUse) == 0) { tmp_inode->i_uid = cifs_sb->mnt_uid; tmp_inode->i_gid = cifs_sb->mnt_gid; - /* set default mode. will override for dirs below */ - tmp_inode->i_mode = cifs_sb->mnt_file_mode; - } else { - /* mask off the type bits since it gets set - below and we do not want to get two type - bits set */ + } + + if (attr & ATTR_DIRECTORY) + default_mode = cifs_sb->mnt_dir_mode; + else + default_mode = cifs_sb->mnt_file_mode; + + /* set initial permissions */ + if ((atomic_read(&cifsInfo->inUse) == 0) || + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) + tmp_inode->i_mode = default_mode; + else { + /* just reenable write bits if !ATTR_READONLY */ + if ((tmp_inode->i_mode & S_IWUGO) == 0 && + (attr & ATTR_READONLY) == 0) + tmp_inode->i_mode |= (S_IWUGO & default_mode); + tmp_inode->i_mode &= ~S_IFMT; } - if (attr & ATTR_DIRECTORY) { - *pobject_type = DT_DIR; - /* override default perms since we do not lock dirs */ - if (atomic_read(&cifsInfo->inUse) == 0) - tmp_inode->i_mode = cifs_sb->mnt_dir_mode; - tmp_inode->i_mode |= S_IFDIR; - } else if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) && - (attr & ATTR_SYSTEM)) { + /* clear write bits if ATTR_READONLY is set */ + if (attr & ATTR_READONLY) + tmp_inode->i_mode &= ~S_IWUGO; + + /* set inode type */ + if ((attr & ATTR_SYSTEM) && + (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL)) { if (end_of_file == 0) { - *pobject_type = DT_FIFO; tmp_inode->i_mode |= S_IFIFO; + *pobject_type = DT_FIFO; } else { - /* rather than get the type here, we mark the - inode as needing revalidate and get the real type - (blk vs chr vs. symlink) later ie in lookup */ - *pobject_type = DT_REG; + /* + * trying to get the type can be slow, so just call + * this a regular file for now, and mark for reval + */ tmp_inode->i_mode |= S_IFREG; + *pobject_type = DT_REG; cifsInfo->time = 0; } -/* we no longer mark these because we could not follow them */ -/* } else if (attr & ATTR_REPARSE) { - *pobject_type = DT_LNK; - tmp_inode->i_mode |= S_IFLNK; */ } else { - *pobject_type = DT_REG; - tmp_inode->i_mode |= S_IFREG; - if (attr & ATTR_READONLY) - tmp_inode->i_mode &= ~(S_IWUGO); - else if ((tmp_inode->i_mode & S_IWUGO) == 0) - /* the ATTR_READONLY flag may have been changed on */ - /* server -- set any w bits allowed by mnt_file_mode */ - tmp_inode->i_mode |= (S_IWUGO & cifs_sb->mnt_file_mode); - } /* could add code here - to validate if device or weird share type? */ + if (attr & ATTR_DIRECTORY) { + tmp_inode->i_mode |= S_IFDIR; + *pobject_type = DT_DIR; + } else { + tmp_inode->i_mode |= S_IFREG; + *pobject_type = DT_REG; + } + } /* can not fill in nlink here as in qpathinfo version and Unx search */ if (atomic_read(&cifsInfo->inUse) == 0) -- cgit v0.10.2 From b0fd30d3e7e768aad5e398caaea6ae5a5c814eab Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:33:34 -0400 Subject: when creating new inodes, use file_mode/dir_mode exclusively on mount without unix extensions When CIFS creates a new inode on a mount without unix extensions, it temporarily assigns the mode that was passed to it in the create/mkdir call. Eventually, when the inode is revalidated, it changes to have the file_mode or dir_mode for the mount. This is confusing to users who expect that the mode shouldn't change this way. It's also problematic since only the mode is treated this way, not the uid or gid. Suppose you have a CIFS mount that's mounted with: uid=0,gid=0,file_mode=0666,dir_mode=0777 ...if an unprivileged user comes along and does this on the mount: mkdir -m 0700 foo touch foo/bar ...there is a period of time where the touch will fail, since the dir will initially be owned by root and have mode 0700. If the user waits long enough, then "foo" will be revalidated and will get the correct dir_mode permissions. This patch changes cifs_mkdir and cifs_create to not overwrite the mode found by the initial cifs_get_inode_info call after the inode is created on the server. Legacy behavior can be reenabled with the new "dynperm" mount option. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c index f0b5b5f..fb69c1f 100644 --- a/fs/cifs/dir.c +++ b/fs/cifs/dir.c @@ -260,7 +260,9 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode, buf, inode->i_sb, xid, &fileHandle); if (newinode) { - newinode->i_mode = mode; + if (cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_DYNPERM) + newinode->i_mode = mode; if ((oplock & CIFS_CREATE_ACTION) && (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index ae5bcaf..12667d6 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1015,8 +1015,11 @@ mkdir_get_info: CIFS_MOUNT_MAP_SPECIAL_CHR); } if (direntry->d_inode) { - direntry->d_inode->i_mode = mode; - direntry->d_inode->i_mode |= S_IFDIR; + if (cifs_sb->mnt_cifs_flags & + CIFS_MOUNT_DYNPERM) + direntry->d_inode->i_mode = + (mode | S_IFDIR); + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { direntry->d_inode->i_uid = -- cgit v0.10.2 From 4e94a105ed0df78e25b20ff8ed6761f5937662b1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 18:22:46 +0000 Subject: [CIFS] remove trailing whitespace Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 12667d6..ae6b725 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1019,7 +1019,7 @@ mkdir_get_info: CIFS_MOUNT_DYNPERM) direntry->d_inode->i_mode = (mode | S_IFDIR); - + if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID) { direntry->d_inode->i_uid = -- cgit v0.10.2 From 4ca691a892e8ab4f79583de1394f17a7dcfa2b57 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:33:34 -0400 Subject: silently ignore ownership changes unless unix extensions are enabled or we're faking uid changes CIFS currently allows you to change the ownership of a file, but unless unix extensions are enabled this change is not passed off to the server. Have CIFS silently ignore ownership changes that can't be persistently stored on the server unless the "setuids" option is explicitly specified. We could return an error here (-EOPNOTSUPP or something), but this is how most disk-based windows filesystems on behave on Linux (e.g. VFAT, NTFS, etc). With cifsacl support and proper Windows to Unix idmapping support, we may be able to do this more properly in the future. Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index ae6b725..fe752fd 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1546,13 +1546,26 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) } else goto cifs_setattr_exit; } - if (attrs->ia_valid & ATTR_UID) { - cFYI(1, ("UID changed to %d", attrs->ia_uid)); - uid = attrs->ia_uid; - } - if (attrs->ia_valid & ATTR_GID) { - cFYI(1, ("GID changed to %d", attrs->ia_gid)); - gid = attrs->ia_gid; + + /* + * Without unix extensions we can't send ownership changes to the + * server, so silently ignore them. This is consistent with how + * local DOS/Windows filesystems behave (VFAT, NTFS, etc). With + * CIFSACL support + proper Windows to Unix idmapping, we may be + * able to support this in the future. + */ + if (!pTcon->unix_ext && + !(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SET_UID)) { + attrs->ia_valid &= ~(ATTR_UID | ATTR_GID); + } else { + if (attrs->ia_valid & ATTR_UID) { + cFYI(1, ("UID changed to %d", attrs->ia_uid)); + uid = attrs->ia_uid; + } + if (attrs->ia_valid & ATTR_GID) { + cFYI(1, ("GID changed to %d", attrs->ia_gid)); + gid = attrs->ia_gid; + } } time_buf.Attributes = 0; -- cgit v0.10.2 From 7c28472a5d4ecf7c61b3c3901994be878cd6c5d2 Mon Sep 17 00:00:00 2001 From: Russell King Date: Fri, 23 May 2008 19:35:52 +0100 Subject: [ARM] integrator: fix build warnings and errors Fix resource_size_t warning in impd1.c, and printascii() build errors in pci_v3.c Signed-off-by: Russell King diff --git a/arch/arm/mach-integrator/impd1.c b/arch/arm/mach-integrator/impd1.c index 92d79fb..62e653a3 100644 --- a/arch/arm/mach-integrator/impd1.c +++ b/arch/arm/mach-integrator/impd1.c @@ -369,7 +369,8 @@ static int impd1_probe(struct lm_device *dev) lm_set_drvdata(dev, impd1); - printk("IM-PD1 found at 0x%08lx\n", dev->resource.start); + printk("IM-PD1 found at 0x%08lx\n", + (unsigned long)dev->resource.start); for (i = 0; i < ARRAY_SIZE(impd1->vcos); i++) { impd1->vcos[i].owner = THIS_MODULE, diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index d55fa4e..c07f497 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -405,7 +405,6 @@ v3_pci_fault(unsigned long addr, unsigned int fsr, struct pt_regs *regs) addr, fsr, pc, instr, __raw_readl(SC_LBFADDR), __raw_readl(SC_LBFCODE) & 255, v3_readb(V3_LB_ISTAT)); printk(KERN_DEBUG "%s", buf); - printascii(buf); #endif v3_writeb(V3_LB_ISTAT, 0); @@ -447,6 +446,7 @@ static irqreturn_t v3_irq(int dummy, void *devid) unsigned long pc = instruction_pointer(regs); unsigned long instr = *(unsigned long *)pc; char buf[128]; + extern void printascii(const char *); sprintf(buf, "V3 int %d: pc=0x%08lx [%08lx] LBFADDR=%08x LBFCODE=%02x " "ISTAT=%02x\n", IRQ_AP_V3INT, pc, instr, -- cgit v0.10.2 From 27adb44c4f671d15932eb0702a09d27244a8a7c1 Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 19:43:29 +0000 Subject: [CIFS] warn if both dynperm and cifsacl mount options specified Signed-off-by: Steve French diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 023434f..d49e274 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -2120,6 +2120,10 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb, cifs_sb->mnt_cifs_flags |= CIFS_MOUNT_DIRECT_IO; } + if ((volume_info.cifs_acl) && (volume_info.dynperm)) + cERROR(1, ("mount option dynperm ignored if cifsacl " + "mount option supported")); + tcon = find_unc(sin_server.sin_addr.s_addr, volume_info.UNC, volume_info.username); -- cgit v0.10.2 From b7206153f61bb63ee2cffa63905b57ec01d20e6e Mon Sep 17 00:00:00 2001 From: Steve French Date: Fri, 23 May 2008 20:35:07 +0000 Subject: [CIFS] Correct incorrect obscure open flag Also add defines for pipe subcommand codes Signed-off-by: Steve French diff --git a/fs/cifs/cifspdu.h b/fs/cifs/cifspdu.h index 65d58b4..0f327c2 100644 --- a/fs/cifs/cifspdu.h +++ b/fs/cifs/cifspdu.h @@ -79,6 +79,19 @@ #define TRANS2_GET_DFS_REFERRAL 0x10 #define TRANS2_REPORT_DFS_INCOSISTENCY 0x11 +/* SMB Transact (Named Pipe) subcommand codes */ +#define TRANS_SET_NMPIPE_STATE 0x0001 +#define TRANS_RAW_READ_NMPIPE 0x0011 +#define TRANS_QUERY_NMPIPE_STATE 0x0021 +#define TRANS_QUERY_NMPIPE_INFO 0x0022 +#define TRANS_PEEK_NMPIPE 0x0023 +#define TRANS_TRANSACT_NMPIPE 0x0026 +#define TRANS_RAW_WRITE_NMPIPE 0x0031 +#define TRANS_READ_NMPIPE 0x0036 +#define TRANS_WRITE_NMPIPE 0x0037 +#define TRANS_WAIT_NMPIPE 0x0053 +#define TRANS_CALL_NMPIPE 0x0054 + /* NT Transact subcommand codes */ #define NT_TRANSACT_CREATE 0x01 #define NT_TRANSACT_IOCTL 0x02 @@ -328,12 +341,13 @@ #define CREATE_COMPLETE_IF_OPLK 0x00000100 /* should be zero */ #define CREATE_NO_EA_KNOWLEDGE 0x00000200 #define CREATE_EIGHT_DOT_THREE 0x00000400 /* doc says this is obsolete - open for recovery flag - should - be zero */ + "open for recovery" flag - should + be zero in any case */ +#define CREATE_OPEN_FOR_RECOVERY 0x00000400 #define CREATE_RANDOM_ACCESS 0x00000800 #define CREATE_DELETE_ON_CLOSE 0x00001000 #define CREATE_OPEN_BY_ID 0x00002000 -#define CREATE_OPEN_BACKUP_INTN 0x00004000 +#define CREATE_OPEN_BACKUP_INTENT 0x00004000 #define CREATE_NO_COMPRESSION 0x00008000 #define CREATE_RESERVE_OPFILTER 0x00100000 /* should be zero */ #define OPEN_REPARSE_POINT 0x00200000 @@ -722,7 +736,6 @@ typedef struct smb_com_tconx_rsp_ext { #define SMB_CSC_CACHE_AUTO_REINT 0x0004 #define SMB_CSC_CACHE_VDO 0x0008 #define SMB_CSC_NO_CACHING 0x000C - #define SMB_UNIQUE_FILE_NAME 0x0010 #define SMB_EXTENDED_SIGNATURES 0x0020 @@ -806,7 +819,7 @@ typedef struct smb_com_findclose_req { #define ICOUNT_MASK 0x00FF #define PIPE_READ_MODE 0x0100 #define NAMED_PIPE_TYPE 0x0400 -#define PIPE_END_POINT 0x0800 +#define PIPE_END_POINT 0x4000 #define BLOCKING_NAMED_PIPE 0x8000 typedef struct smb_com_open_req { /* also handles create */ -- cgit v0.10.2 From 1f42ea7bc0ddfadebd9e1c5362b41b53902dbcb1 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Thu, 22 May 2008 12:34:41 +0100 Subject: [SCSI] fix intermittent oops in scsi_bus_uevent Reported-by: Sitsofe Wheeler > BUG: unable to handle kernel paging request at e6f17fac > IP: [] scsi_bus_uevent+0x1/0x17 > *pde = 2714b163 *pte = 26f17160 > Oops: 0000 [#1] DEBUG_PAGEALLOC > last sysfs file: > > Pid: 1, comm: swapper Not tainted (2.6.26-rc2-next-20080516skw #30) > EIP: 0060:[] EFLAGS: 00010282 CPU: 0 > EIP is at scsi_bus_uevent+0x1/0x17 > EAX: e6f18014 EBX: e6f18014 ECX: c02604d5 EDX: e7173000 > ESI: e7173000 EDI: e7173000 EBP: e7851ca0 ESP: e7851c90 > DS: 007b ES: 007b FS: 0000 GS: 0000 SS: 0068 The problem is caused by: commit b0ed43360fdca227048d88a08290365cb681c1a8 Author: Hannes Reinecke Date: Tue Mar 18 14:32:28 2008 +0100 [SCSI] add scsi_host and scsi_target to scsi_bus which added scsi_bus_type to the struct scsi_target device. This causes both the scsi_device and scsi_target to fire scsi_bus_uevents. However, the actualy scsi_bus_uevent() call assumes blindly that it's a struct scsi_device. Check for this and return immediately if it isn't. Signed-off-by: James Bottomley diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index 049103f..93d2b67 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -359,7 +359,12 @@ static int scsi_bus_match(struct device *dev, struct device_driver *gendrv) static int scsi_bus_uevent(struct device *dev, struct kobj_uevent_env *env) { - struct scsi_device *sdev = to_scsi_device(dev); + struct scsi_device *sdev; + + if (dev->type != &scsi_dev_type) + return 0; + + sdev = to_scsi_device(dev); add_uevent_var(env, "MODALIAS=" SCSI_DEVICE_MODALIAS_FMT, sdev->type); return 0; -- cgit v0.10.2 From 4efeb4dd3c0bf534e431a8e7c72d0afbd4cd24aa Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 12 May 2008 21:21:05 +0200 Subject: PCI: use dev_to_node in pci_call_probe to make sure get one online node. Signed-off-by: Yinghai Lu Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index 72cf61e..e1637bd 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -181,7 +181,7 @@ static int pci_call_probe(struct pci_driver *drv, struct pci_dev *dev, any need to change it. */ struct mempolicy *oldpol; cpumask_t oldmask = current->cpus_allowed; - int node = pcibus_to_node(dev->bus); + int node = dev_to_node(&dev->dev); if (node >= 0) { node_to_cpumask_ptr(nodecpumask, node); -- cgit v0.10.2 From b9e16bc548600124da9d24186364ee8d06040569 Mon Sep 17 00:00:00 2001 From: Travis Place Date: Wed, 21 May 2008 16:57:20 +0200 Subject: [ALSA] hda - Add model for ASUS P5K-E/WIFI-AP Added a config table entry for the ASUS P5K-E/WIFI-AP mainboard (ID 1043:8227) to use AD1988_6STACK_DIG Signed-off-by: Travis Place Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index e0a605a..ff1b922 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -2858,6 +2858,7 @@ static const char *ad1988_models[AD1988_MODEL_LAST] = { static struct snd_pci_quirk ad1988_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x81ec, "Asus P5B-DLX", AD1988_6STACK_DIG), SND_PCI_QUIRK(0x1043, 0x81f6, "Asus M2N-SLI", AD1988_6STACK_DIG), + SND_PCI_QUIRK(0x1043, 0x8277, "Asus P5K-E/WIFI-AP", AD1988_6STACK_DIG), {} }; -- cgit v0.10.2 From bc9b56238eedda865070dcaed6694d65b517c8d6 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 May 2008 17:50:27 +0200 Subject: [ALSA] hda - Fix noise on VT1708 codec We get quite noisy output on the right channel on VT1708 codec when 24bit samples are used. Suppress the 24bit support until any real fix is found. https://bugzilla.novell.com/show_bug.cgi?id=390473 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 52b1d81..e7e4352 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -447,6 +447,23 @@ static struct hda_pcm_stream vt1708_pcm_analog_playback = { }, }; +static struct hda_pcm_stream vt1708_pcm_analog_s16_playback = { + .substreams = 1, + .channels_min = 2, + .channels_max = 8, + .nid = 0x10, /* NID to query formats and rates */ + /* We got noisy outputs on the right channel on VT1708 when + * 24bit samples are used. Until any workaround is found, + * disable the 24bit format, so far. + */ + .formats = SNDRV_PCM_FMTBIT_S16_LE, + .ops = { + .open = via_playback_pcm_open, + .prepare = via_playback_pcm_prepare, + .cleanup = via_playback_pcm_cleanup + }, +}; + static struct hda_pcm_stream vt1708_pcm_analog_capture = { .substreams = 2, .channels_min = 2, @@ -899,6 +916,9 @@ static int patch_vt1708(struct hda_codec *codec) spec->stream_name_analog = "VT1708 Analog"; spec->stream_analog_playback = &vt1708_pcm_analog_playback; + /* disable 32bit format on VT1708 */ + if (codec->vendor_id == 0x11061708) + spec->stream_analog_playback = &vt1708_pcm_analog_s16_playback; spec->stream_analog_capture = &vt1708_pcm_analog_capture; spec->stream_name_digital = "VT1708 Digital"; -- cgit v0.10.2 From 20a3a05dd66ad0f678a587688cc85f0b36869876 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 23 May 2008 17:52:53 +0200 Subject: [ALSA] hda - Fix COEF and EAPD in ALC889 auto-configuration mode Fix the missing COEF and EAPD initialization in ALC889 auto-configuration mode. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 864b2f5..d42864a 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -853,6 +853,7 @@ do_sku: case 0x10ec0269: case 0x10ec0862: case 0x10ec0662: + case 0x10ec0889: snd_hda_codec_write(codec, 0x14, 0, AC_VERB_SET_EAPD_BTLENABLE, 2); snd_hda_codec_write(codec, 0x15, 0, @@ -877,6 +878,7 @@ do_sku: case 0x10ec0883: case 0x10ec0885: case 0x10ec0888: + case 0x10ec0889: snd_hda_codec_write(codec, 0x20, 0, AC_VERB_SET_COEF_INDEX, 7); tmp = snd_hda_codec_read(codec, 0x20, 0, -- cgit v0.10.2 From 97ec710cab76f90a6bece76a04e76aa50096a470 Mon Sep 17 00:00:00 2001 From: Travis Place Date: Fri, 23 May 2008 18:31:46 +0200 Subject: [ALSA] hda - Added support for Foxconn P35AX-S mainboard Added IDs for the Foxconn P35AX-S mainboard to patch_realtek.c, so that ALC883_6ST_DIG is used by default. Signed-off-by: Travis Place Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index d42864a..8f31247 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -7745,6 +7745,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x103c, 0x2a60, "HP Lucknow", ALC888_3ST_HP), SND_PCI_QUIRK(0x103c, 0x2a61, "HP Nettle", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1043, 0x8249, "Asus M2A-VM HDMI", ALC883_3ST_6ch_DIG), + SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG), SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG), SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD), -- cgit v0.10.2 From 42172d751b4596b8ca4346a1c251b5f1c661ab0c Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Fri, 23 May 2008 13:04:18 -0700 Subject: mm: allow pfnmap ->fault()s Take out an assertion to allow ->fault handlers to service PFNMAP regions. This is required to reimplement .nopfn handlers with .fault handlers and subsequently remove nopfn. Signed-off-by: Nick Piggin Acked-by: Jes Sorensen Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index fb5608a..19e0ae9 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -2295,8 +2295,6 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma, vmf.flags = flags; vmf.page = NULL; - BUG_ON(vma->vm_flags & VM_PFNMAP); - ret = vma->vm_ops->fault(vma, &vmf); if (unlikely(ret & (VM_FAULT_ERROR | VM_FAULT_NOPAGE))) return ret; -- cgit v0.10.2 From 03fb0bce01490c9bdedad861962c76f987531014 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Fri, 23 May 2008 13:04:19 -0700 Subject: fuse: fix bdi naming conflict Fuse allocates a separate bdi for each filesystem, and registers them in sysfs with "MAJOR:MINOR" of sb->s_dev (st_dev). This works fine for anon devices normally used by fuse, but can conflict with an already registered BDI for "fuseblk" filesystems, where sb->s_dev represents a real block device. In particularl this happens if a non-partitioned device is being mounted. Fix by registering with a different name for "fuseblk" filesystems. Thanks to Ioan Ionita for the bug report. Signed-off-by: Miklos Szeredi Reported-by: Ioan Ionita Tested-by: Ioan Ionita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/ABI/testing/sysfs-class-bdi b/Documentation/ABI/testing/sysfs-class-bdi index 5ac1e01..5f50097 100644 --- a/Documentation/ABI/testing/sysfs-class-bdi +++ b/Documentation/ABI/testing/sysfs-class-bdi @@ -14,6 +14,10 @@ MAJOR:MINOR non-block filesystems which provide their own BDI, such as NFS and FUSE. +MAJOR:MINOR-fuseblk + + Value of st_dev on fuseblk filesystems. + default The default backing dev, used for non-block device backed diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index fb77e09..43e9951 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -488,7 +488,12 @@ static struct fuse_conn *new_conn(struct super_block *sb) err = bdi_init(&fc->bdi); if (err) goto error_kfree; - err = bdi_register_dev(&fc->bdi, fc->dev); + if (sb->s_bdev) { + err = bdi_register(&fc->bdi, NULL, "%u:%u-fuseblk", + MAJOR(fc->dev), MINOR(fc->dev)); + } else { + err = bdi_register_dev(&fc->bdi, fc->dev); + } if (err) goto error_bdi_destroy; /* -- cgit v0.10.2 From 71fd5179e8d1d4d503b517e0c5374f7c49540bfc Mon Sep 17 00:00:00 2001 From: Cyrill Gorcunov Date: Fri, 23 May 2008 13:04:20 -0700 Subject: ecryptfs: fix missed mutex_unlock Cc: Michael Halcrow Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ecryptfs/crypto.c b/fs/ecryptfs/crypto.c index cd62d75..e2832bc 100644 --- a/fs/ecryptfs/crypto.c +++ b/fs/ecryptfs/crypto.c @@ -1906,9 +1906,9 @@ int ecryptfs_get_tfm_and_mutex_for_cipher_name(struct crypto_blkcipher **tfm, goto out; } } - mutex_unlock(&key_tfm_list_mutex); (*tfm) = key_tfm->key_tfm; (*tfm_mutex) = &key_tfm->key_tfm_mutex; out: + mutex_unlock(&key_tfm_list_mutex); return rc; } -- cgit v0.10.2 From f899b0adc6fc8f60a9db8b52f36f06fd1abeaf7c Mon Sep 17 00:00:00 2001 From: Karel Zak Date: Fri, 23 May 2008 13:04:21 -0700 Subject: MAINTAINERS: add util-linux-ng package (akpm: we often deal with util-linux and I (at least) can never remember where they hang out). Signed-off-by: Karel Zak Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index dfd0551..0a6d2ca 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4375,6 +4375,14 @@ M: gregkh@suse.de L: linux-kernel@vger.kernel.org S: Maintained +UTIL-LINUX-NG PACKAGE +P: Karel Zak +M: kzak@redhat.com +L: util-linux-ng@vger.kernel.org +W: http://kernel.org/~kzak/util-linux-ng/ +T: git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git +S: Maintained + VFAT/FAT/MSDOS FILESYSTEM: P: OGAWA Hirofumi M: hirofumi@mail.parknet.co.jp -- cgit v0.10.2 From f7232154198f928fc25f420d6190468212a7632a Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 23 May 2008 13:04:21 -0700 Subject: mm: don't drop a partial page in a zone's memory map size In a zone's present pages number, account for all pages occupied by the memory map, including a partial. Signed-off-by: Johannes Weiner Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 6383557..0353002 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -3378,7 +3378,8 @@ static void __paginginit free_area_init_core(struct pglist_data *pgdat, * is used by this zone for memmap. This affects the watermark * and per-cpu initialisations */ - memmap_pages = (size * sizeof(struct page)) >> PAGE_SHIFT; + memmap_pages = + PAGE_ALIGN(size * sizeof(struct page)) >> PAGE_SHIFT; if (realsize >= memmap_pages) { realsize -= memmap_pages; printk(KERN_DEBUG -- cgit v0.10.2 From 80bfc25f42db6d4715c7688ae2352c5a8038fe7e Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Fri, 23 May 2008 13:04:22 -0700 Subject: ntfs: le*_add_cpu conversion replace all: little_endian_variable = cpu_to_leX(leX_to_cpu(little_endian_variable) + expression_in_cpu_byteorder); with: leX_add_cpu(&little_endian_variable, expression_in_cpu_byteorder); generated with semantic patch Signed-off-by: Marcin Slusarz Acked-by: Anton Altaparmakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ntfs/upcase.c b/fs/ntfs/upcase.c index 9101807..e2f72ca 100644 --- a/fs/ntfs/upcase.c +++ b/fs/ntfs/upcase.c @@ -77,11 +77,10 @@ ntfschar *generate_default_upcase(void) uc[i] = cpu_to_le16(i); for (r = 0; uc_run_table[r][0]; r++) for (i = uc_run_table[r][0]; i < uc_run_table[r][1]; i++) - uc[i] = cpu_to_le16(le16_to_cpu(uc[i]) + - uc_run_table[r][2]); + le16_add_cpu(&uc[i], uc_run_table[r][2]); for (r = 0; uc_dup_table[r][0]; r++) for (i = uc_dup_table[r][0]; i < uc_dup_table[r][1]; i += 2) - uc[i + 1] = cpu_to_le16(le16_to_cpu(uc[i + 1]) - 1); + le16_add_cpu(&uc[i + 1], -1); for (r = 0; uc_word_table[r][0]; r++) uc[uc_word_table[r][0]] = cpu_to_le16(uc_word_table[r][1]); return uc; -- cgit v0.10.2 From ca68d0ac16539a062ae26ca50da8b186fa3a0814 Mon Sep 17 00:00:00 2001 From: Gabor Czigola Date: Fri, 23 May 2008 13:04:23 -0700 Subject: hdaps: invert the axes for HDAPS on Lenovo R61i ThinkPads Cc: "Mark M. Hoffman" Cc: Dmitry Torokhov Cc: Jiri Kosina Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index bab5fd2..88e8965 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -515,6 +515,7 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R50"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"), -- cgit v0.10.2 From b8fdaf5a05adbf80e5a943bb3f65b46b5fb9b488 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 23 May 2008 13:04:25 -0700 Subject: i5k_amb: support Intel 5400 chipset Minor rework to support the Intel 5400 chipset. Signed-off-by: Darrick J. Wong Cc: "Mark M. Hoffman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index 6ac5c6f..f9e2ed6 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -111,6 +111,7 @@ struct i5k_amb_data { void __iomem *amb_mmio; struct i5k_device_attribute *attrs; unsigned int num_attrs; + unsigned long chipset_id; }; static ssize_t show_name(struct device *dev, struct device_attribute *devattr, @@ -382,7 +383,8 @@ err: return res; } -static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) +static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data, + unsigned long devid) { struct pci_dev *pcidev; u32 val32; @@ -390,7 +392,7 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) /* Find AMB register memory space */ pcidev = pci_get_device(PCI_VENDOR_ID_INTEL, - PCI_DEVICE_ID_INTEL_5000_ERR, + devid, NULL); if (!pcidev) return -ENODEV; @@ -409,6 +411,8 @@ static int __devinit i5k_find_amb_registers(struct i5k_amb_data *data) goto out; } + data->chipset_id = devid; + res = 0; out: pci_dev_put(pcidev); @@ -441,10 +445,30 @@ out: return res; } +static unsigned long i5k_channel_pci_id(struct i5k_amb_data *data, + unsigned long channel) +{ + switch (data->chipset_id) { + case PCI_DEVICE_ID_INTEL_5000_ERR: + return PCI_DEVICE_ID_INTEL_5000_FBD0 + channel; + case PCI_DEVICE_ID_INTEL_5400_ERR: + return PCI_DEVICE_ID_INTEL_5400_FBD0 + channel; + default: + BUG(); + } +} + +static unsigned long chipset_ids[] = { + PCI_DEVICE_ID_INTEL_5000_ERR, + PCI_DEVICE_ID_INTEL_5400_ERR, + 0 +}; + static int __devinit i5k_amb_probe(struct platform_device *pdev) { struct i5k_amb_data *data; struct resource *reso; + int i; int res = -ENODEV; data = kzalloc(sizeof(*data), GFP_KERNEL); @@ -452,19 +476,24 @@ static int __devinit i5k_amb_probe(struct platform_device *pdev) return -ENOMEM; /* Figure out where the AMB registers live */ - res = i5k_find_amb_registers(data); + i = 0; + do { + res = i5k_find_amb_registers(data, chipset_ids[i]); + i++; + } while (res && chipset_ids[i]); + if (res) goto err; /* Copy the DIMM presence map for the first two channels */ res = i5k_channel_probe(&data->amb_present[0], - PCI_DEVICE_ID_INTEL_5000_FBD0); + i5k_channel_pci_id(data, 0)); if (res) goto err; /* Copy the DIMM presence map for the optional second two channels */ i5k_channel_probe(&data->amb_present[2], - PCI_DEVICE_ID_INTEL_5000_FBD1); + i5k_channel_pci_id(data, 1)); /* Set up resource regions */ reso = request_mem_region(data->amb_base, data->amb_len, DRVNAME); diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index cf6dbd75..342b55a 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2383,6 +2383,9 @@ #define PCI_DEVICE_ID_INTEL_ICH10_4 0x3a30 #define PCI_DEVICE_ID_INTEL_ICH10_5 0x3a60 #define PCI_DEVICE_ID_INTEL_IOAT_SNB 0x402f +#define PCI_DEVICE_ID_INTEL_5400_ERR 0x4030 +#define PCI_DEVICE_ID_INTEL_5400_FBD0 0x4035 +#define PCI_DEVICE_ID_INTEL_5400_FBD1 0x4036 #define PCI_DEVICE_ID_INTEL_IOAT_SCNB 0x65ff #define PCI_DEVICE_ID_INTEL_TOLAPAI_0 0x5031 #define PCI_DEVICE_ID_INTEL_TOLAPAI_1 0x5032 -- cgit v0.10.2 From 8808a793f052c0a67426a24b961402fa20e92814 Mon Sep 17 00:00:00 2001 From: "Darrick J. Wong" Date: Fri, 23 May 2008 13:04:25 -0700 Subject: ibmaem: new driver for power/energy/temp meters in IBM System X hardware This driver reads IBM Active Energy Manager energy/temperature/power sensors on IBM System X hardware. [akpm@linux-foundation.org: fix printk warnings] Signed-off-by: Darrick J. Wong Cc: "Mark M. Hoffman" Cc: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem new file mode 100644 index 0000000..2fefaf5 --- /dev/null +++ b/Documentation/hwmon/ibmaem @@ -0,0 +1,37 @@ +Kernel driver ibmaem +====================== + +Supported systems: + * Any recent IBM System X server with Active Energy Manager support. + This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2, + x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface + driver ("ipmi-si") needs to be loaded for this driver to do anything. + Prefix: 'ibmaem' + Datasheet: Not available + +Author: Darrick J. Wong + +Description +----------- + +This driver implements sensor reading support for the energy and power +meters available on various IBM System X hardware through the BMC. All +sensor banks will be exported as platform devices; this driver can talk +to both v1 and v2 interfaces. This driver is completely separate from the +older ibmpex driver. + +The v1 AEM interface has a simple set of features to monitor energy use. +There is a register that displays an estimate of raw energy consumption +since the last BMC reset, and a power sensor that returns average power +use over a configurable interval. + +The v2 AEM interface is a bit more sophisticated, being able to present +a wider range of energy and power use registers, the power cap as +set by the AEM software, and temperature sensors. + +Special Features +---------------- + +The "power_cap" value displays the current system power cap, as set by +the Active Energy Manager software. Setting the power cap from the host +is not currently supported. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 4dc76bc..00ff533 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -330,6 +330,20 @@ config SENSORS_CORETEMP sensor inside your CPU. Supported all are all known variants of Intel Core family. +config SENSORS_IBMAEM + tristate "IBM Active Energy Manager temperature/power sensors and control" + select IPMI_SI + depends on IPMI_HANDLER + help + If you say yes here you get support for the temperature and + power sensors and capping hardware in various IBM System X + servers that support Active Energy Manager. This includes + the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, + and certain HS2x/LS2x/QS2x blades. + + This driver can also be built as a module. If so, the module + will be called ibmaem. + config SENSORS_IBMPEX tristate "IBM PowerExecutive temperature/power sensors" select IPMI_SI diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 3bdb05a..d098677 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -41,6 +41,7 @@ obj-$(CONFIG_SENSORS_GL518SM) += gl518sm.o obj-$(CONFIG_SENSORS_GL520SM) += gl520sm.o obj-$(CONFIG_SENSORS_HDAPS) += hdaps.o obj-$(CONFIG_SENSORS_I5K_AMB) += i5k_amb.o +obj-$(CONFIG_SENSORS_IBMAEM) += ibmaem.o obj-$(CONFIG_SENSORS_IBMPEX) += ibmpex.o obj-$(CONFIG_SENSORS_IT87) += it87.o obj-$(CONFIG_SENSORS_K8TEMP) += k8temp.o diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c new file mode 100644 index 0000000..5c006c9 --- /dev/null +++ b/drivers/hwmon/ibmaem.c @@ -0,0 +1,1111 @@ +/* + * A hwmon driver for the IBM Active Energy Manager temperature/power sensors + * and capping functionality. + * Copyright (C) 2008 IBM + * + * Author: Darrick J. Wong + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REFRESH_INTERVAL (HZ) +#define IPMI_TIMEOUT (30 * HZ) +#define DRVNAME "aem" + +#define AEM_NETFN 0x2E + +#define AEM_FIND_FW_CMD 0x80 +#define AEM_ELEMENT_CMD 0x81 +#define AEM_FW_INSTANCE_CMD 0x82 + +#define AEM_READ_ELEMENT_CFG 0x80 +#define AEM_READ_BUFFER 0x81 +#define AEM_READ_REGISTER 0x82 +#define AEM_WRITE_REGISTER 0x83 +#define AEM_SET_REG_MASK 0x84 +#define AEM_CLEAR_REG_MASK 0x85 +#define AEM_READ_ELEMENT_CFG2 0x86 + +#define AEM_CONTROL_ELEMENT 0 +#define AEM_ENERGY_ELEMENT 1 +#define AEM_CLOCK_ELEMENT 4 +#define AEM_POWER_CAP_ELEMENT 7 +#define AEM_EXHAUST_ELEMENT 9 +#define AEM_POWER_ELEMENT 10 + +#define AEM_MODULE_TYPE_ID 0x0001 + +#define AEM2_NUM_ENERGY_REGS 2 +#define AEM2_NUM_PCAP_REGS 6 +#define AEM2_NUM_TEMP_REGS 2 +#define AEM2_NUM_SENSORS 14 + +#define AEM1_NUM_ENERGY_REGS 1 +#define AEM1_NUM_SENSORS 3 + +/* AEM 2.x has more energy registers */ +#define AEM_NUM_ENERGY_REGS AEM2_NUM_ENERGY_REGS +/* AEM 2.x needs more sensor files */ +#define AEM_NUM_SENSORS AEM2_NUM_SENSORS + +#define POWER_CAP 0 +#define POWER_CAP_MAX_HOTPLUG 1 +#define POWER_CAP_MAX 2 +#define POWER_CAP_MIN_WARNING 3 +#define POWER_CAP_MIN 4 +#define POWER_AUX 5 + +#define AEM_DEFAULT_POWER_INTERVAL 1000 +#define AEM_MIN_POWER_INTERVAL 200 +#define UJ_PER_MJ 1000L + +static DEFINE_IDR(aem_idr); +static DEFINE_SPINLOCK(aem_idr_lock); + +static struct device_driver aem_driver = { + .name = DRVNAME, + .bus = &platform_bus_type, +}; + +struct aem_ipmi_data { + struct completion read_complete; + struct ipmi_addr address; + ipmi_user_t user; + int interface; + + struct kernel_ipmi_msg tx_message; + long tx_msgid; + + void *rx_msg_data; + unsigned short rx_msg_len; + unsigned char rx_result; + int rx_recv_type; + + struct device *bmc_device; +}; + +struct aem_ro_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + int index; +}; + +struct aem_rw_sensor_template { + char *label; + ssize_t (*show)(struct device *dev, + struct device_attribute *devattr, + char *buf); + ssize_t (*set)(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count); + int index; +}; + +struct aem_data { + struct list_head list; + + struct device *hwmon_dev; + struct platform_device *pdev; + struct mutex lock; + char valid; + unsigned long last_updated; /* In jiffies */ + u8 ver_major; + u8 ver_minor; + u8 module_handle; + int id; + struct aem_ipmi_data ipmi; + + /* Function to update sensors */ + void (*update)(struct aem_data *data); + + /* + * AEM 1.x sensors: + * Available sensors: + * Energy meter + * Power meter + * + * AEM 2.x sensors: + * Two energy meters + * Two power meters + * Two temperature sensors + * Six power cap registers + */ + + /* sysfs attrs */ + struct sensor_device_attribute sensors[AEM_NUM_SENSORS]; + + /* energy use in mJ */ + u64 energy[AEM_NUM_ENERGY_REGS]; + + /* power sampling interval in ms */ + unsigned long power_period[AEM_NUM_ENERGY_REGS]; + + /* Everything past here is for AEM2 only */ + + /* power caps in dW */ + u16 pcap[AEM2_NUM_PCAP_REGS]; + + /* exhaust temperature in C */ + u8 temp[AEM2_NUM_TEMP_REGS]; +}; + +/* Data structures returned by the AEM firmware */ +struct aem_iana_id { + u8 bytes[3]; +}; +static struct aem_iana_id system_x_id = { + .bytes = {0x4D, 0x4F, 0x00} +}; + +/* These are used to find AEM1 instances */ +struct aem_find_firmware_req { + struct aem_iana_id id; + u8 rsvd; + u16 index; + u16 module_type_id; +} __packed; + +struct aem_find_firmware_resp { + struct aem_iana_id id; + u8 num_instances; +} __packed; + +/* These are used to find AEM2 instances */ +struct aem_find_instance_req { + struct aem_iana_id id; + u8 instance_number; + u16 module_type_id; +} __packed; + +struct aem_find_instance_resp { + struct aem_iana_id id; + u8 num_instances; + u8 major; + u8 minor; + u8 module_handle; + u16 record_id; +} __packed; + +/* These are used to query sensors */ +struct aem_read_sensor_req { + struct aem_iana_id id; + u8 module_handle; + u8 element; + u8 subcommand; + u8 reg; + u8 rx_buf_size; +} __packed; + +struct aem_read_sensor_resp { + struct aem_iana_id id; + u8 bytes[0]; +} __packed; + +/* Data structures to talk to the IPMI layer */ +struct aem_driver_data { + struct list_head aem_devices; + struct ipmi_smi_watcher bmc_events; + struct ipmi_user_hndl ipmi_hndlrs; +}; + +static void aem_register_bmc(int iface, struct device *dev); +static void aem_bmc_gone(int iface); +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data); + +static void aem_remove_sensors(struct aem_data *data); +static int aem_init_aem1(struct aem_ipmi_data *probe); +static int aem_init_aem2(struct aem_ipmi_data *probe); +static int aem1_find_sensors(struct aem_data *data); +static int aem2_find_sensors(struct aem_data *data); +static void update_aem1_sensors(struct aem_data *data); +static void update_aem2_sensors(struct aem_data *data); + +static struct aem_driver_data driver_data = { + .aem_devices = LIST_HEAD_INIT(driver_data.aem_devices), + .bmc_events = { + .owner = THIS_MODULE, + .new_smi = aem_register_bmc, + .smi_gone = aem_bmc_gone, + }, + .ipmi_hndlrs = { + .ipmi_recv_hndl = aem_msg_handler, + }, +}; + +/* Functions to talk to the IPMI layer */ + +/* Initialize IPMI address, message buffers and user data */ +static int aem_init_ipmi_data(struct aem_ipmi_data *data, int iface, + struct device *bmc) +{ + int err; + + init_completion(&data->read_complete); + data->bmc_device = bmc; + + /* Initialize IPMI address */ + data->address.addr_type = IPMI_SYSTEM_INTERFACE_ADDR_TYPE; + data->address.channel = IPMI_BMC_CHANNEL; + data->address.data[0] = 0; + data->interface = iface; + + /* Initialize message buffers */ + data->tx_msgid = 0; + data->tx_message.netfn = AEM_NETFN; + + /* Create IPMI messaging interface user */ + err = ipmi_create_user(data->interface, &driver_data.ipmi_hndlrs, + data, &data->user); + if (err < 0) { + dev_err(bmc, "Unable to register user with IPMI " + "interface %d\n", data->interface); + return -EACCES; + } + + return 0; +} + +/* Send an IPMI command */ +static int aem_send_message(struct aem_ipmi_data *data) +{ + int err; + + err = ipmi_validate_addr(&data->address, sizeof(data->address)); + if (err) + goto out; + + data->tx_msgid++; + err = ipmi_request_settime(data->user, &data->address, data->tx_msgid, + &data->tx_message, data, 0, 0, 0); + if (err) + goto out1; + + return 0; +out1: + dev_err(data->bmc_device, "request_settime=%x\n", err); + return err; +out: + dev_err(data->bmc_device, "validate_addr=%x\n", err); + return err; +} + +/* Dispatch IPMI messages to callers */ +static void aem_msg_handler(struct ipmi_recv_msg *msg, void *user_msg_data) +{ + unsigned short rx_len; + struct aem_ipmi_data *data = user_msg_data; + + if (msg->msgid != data->tx_msgid) { + dev_err(data->bmc_device, "Mismatch between received msgid " + "(%02x) and transmitted msgid (%02x)!\n", + (int)msg->msgid, + (int)data->tx_msgid); + ipmi_free_recv_msg(msg); + return; + } + + data->rx_recv_type = msg->recv_type; + if (msg->msg.data_len > 0) + data->rx_result = msg->msg.data[0]; + else + data->rx_result = IPMI_UNKNOWN_ERR_COMPLETION_CODE; + + if (msg->msg.data_len > 1) { + rx_len = msg->msg.data_len - 1; + if (data->rx_msg_len < rx_len) + rx_len = data->rx_msg_len; + data->rx_msg_len = rx_len; + memcpy(data->rx_msg_data, msg->msg.data + 1, data->rx_msg_len); + } else + data->rx_msg_len = 0; + + ipmi_free_recv_msg(msg); + complete(&data->read_complete); +} + +/* ID functions */ + +/* Obtain an id */ +static int aem_idr_get(int *id) +{ + int i, err; + +again: + if (unlikely(!idr_pre_get(&aem_idr, GFP_KERNEL))) + return -ENOMEM; + + spin_lock(&aem_idr_lock); + err = idr_get_new(&aem_idr, NULL, &i); + spin_unlock(&aem_idr_lock); + + if (unlikely(err == -EAGAIN)) + goto again; + else if (unlikely(err)) + return err; + + *id = i & MAX_ID_MASK; + return 0; +} + +/* Release an object ID */ +static void aem_idr_put(int id) +{ + spin_lock(&aem_idr_lock); + idr_remove(&aem_idr, id); + spin_unlock(&aem_idr_lock); +} + +/* Sensor support functions */ + +/* Read a sensor value */ +static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, + void *buf, size_t size) +{ + int rs_size, res; + struct aem_read_sensor_req rs_req; + struct aem_read_sensor_resp *rs_resp; + struct aem_ipmi_data *ipmi = &data->ipmi; + + /* AEM registers are 1, 2, 4 or 8 bytes */ + switch (size) { + case 1: + case 2: + case 4: + case 8: + break; + default: + return -EINVAL; + } + + rs_req.id = system_x_id; + rs_req.module_handle = data->module_handle; + rs_req.element = elt; + rs_req.subcommand = AEM_READ_REGISTER; + rs_req.reg = reg; + rs_req.rx_buf_size = size; + + ipmi->tx_message.cmd = AEM_ELEMENT_CMD; + ipmi->tx_message.data = (char *)&rs_req; + ipmi->tx_message.data_len = sizeof(rs_req); + + rs_size = sizeof(*rs_resp) + size; + rs_resp = kzalloc(rs_size, GFP_KERNEL); + if (!rs_resp) + return -ENOMEM; + + ipmi->rx_msg_data = rs_resp; + ipmi->rx_msg_len = rs_size; + + aem_send_message(ipmi); + + res = wait_for_completion_timeout(&ipmi->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (ipmi->rx_result || ipmi->rx_msg_len != rs_size || + memcmp(&rs_resp->id, &system_x_id, sizeof(system_x_id))) { + kfree(rs_resp); + return -ENOENT; + } + + switch (size) { + case 1: { + u8 *x = buf; + *x = rs_resp->bytes[0]; + break; + } + case 2: { + u16 *x = buf; + *x = be16_to_cpup((u16 *)rs_resp->bytes); + break; + } + case 4: { + u32 *x = buf; + *x = be32_to_cpup((u32 *)rs_resp->bytes); + break; + } + case 8: { + u64 *x = buf; + *x = be64_to_cpup((u64 *)rs_resp->bytes); + break; + } + } + + return 0; +} + +/* Update AEM energy registers */ +static void update_aem_energy(struct aem_data *data) +{ + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8); + if (data->ver_major < 2) + return; + aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8); +} + +/* Update all AEM1 sensors */ +static void update_aem1_sensors(struct aem_data *data) +{ + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); +out: + mutex_unlock(&data->lock); +} + +/* Update all AEM2 sensors */ +static void update_aem2_sensors(struct aem_data *data) +{ + int i; + + mutex_lock(&data->lock); + if (time_before(jiffies, data->last_updated + REFRESH_INTERVAL) && + data->valid) + goto out; + + update_aem_energy(data); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 0, &data->temp[0], 1); + aem_read_sensor(data, AEM_EXHAUST_ELEMENT, 1, &data->temp[1], 1); + + for (i = POWER_CAP; i <= POWER_AUX; i++) + aem_read_sensor(data, AEM_POWER_CAP_ELEMENT, i, + &data->pcap[i], 2); +out: + mutex_unlock(&data->lock); +} + +/* Delete an AEM instance */ +static void aem_delete(struct aem_data *data) +{ + list_del(&data->list); + aem_remove_sensors(data); + hwmon_device_unregister(data->hwmon_dev); + ipmi_destroy_user(data->ipmi.user); + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); + aem_idr_put(data->id); + kfree(data); +} + +/* Probe functions for AEM1 devices */ + +/* Retrieve version and module handle for an AEM1 instance */ +static int aem_find_aem1_count(struct aem_ipmi_data *data) +{ + int res; + struct aem_find_firmware_req ff_req; + struct aem_find_firmware_resp ff_resp; + + ff_req.id = system_x_id; + ff_req.index = 0; + ff_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FIND_FW_CMD; + data->tx_message.data = (char *)&ff_req; + data->tx_message.data_len = sizeof(ff_req); + + data->rx_msg_data = &ff_resp; + data->rx_msg_len = sizeof(ff_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(ff_resp) || + memcmp(&ff_resp.id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return ff_resp.num_instances; +} + +/* Find and initialize one AEM1 instance */ +static int aem_init_aem1_inst(struct aem_ipmi_data *probe, u8 module_handle) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = 1; + data->ver_minor = 0; + data->module_handle = module_handle; + for (i = 0; i < AEM1_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem1_sensors; + + /* Find sensors */ + if (aem1_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM1 instances */ +static int aem_init_aem1(struct aem_ipmi_data *probe) +{ + int num, i, err; + + num = aem_find_aem1_count(probe); + for (i = 0; i < num; i++) { + err = aem_init_aem1_inst(probe, i); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM1 0x%X\n", + err, i); + return err; + } + } + + return 0; +} + +/* Probe functions for AEM2 devices */ + +/* Retrieve version and module handle for an AEM2 instance */ +static int aem_find_aem2(struct aem_ipmi_data *data, + struct aem_find_instance_resp *fi_resp, + int instance_num) +{ + int res; + struct aem_find_instance_req fi_req; + + fi_req.id = system_x_id; + fi_req.instance_number = instance_num; + fi_req.module_type_id = cpu_to_be16(AEM_MODULE_TYPE_ID); + + data->tx_message.cmd = AEM_FW_INSTANCE_CMD; + data->tx_message.data = (char *)&fi_req; + data->tx_message.data_len = sizeof(fi_req); + + data->rx_msg_data = fi_resp; + data->rx_msg_len = sizeof(*fi_resp); + + aem_send_message(data); + + res = wait_for_completion_timeout(&data->read_complete, IPMI_TIMEOUT); + if (!res) + return -ETIMEDOUT; + + if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) || + memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id))) + return -ENOENT; + + return 0; +} + +/* Find and initialize one AEM2 instance */ +static int aem_init_aem2_inst(struct aem_ipmi_data *probe, + struct aem_find_instance_resp *fi_resp) +{ + struct aem_data *data; + int i; + int res = -ENOMEM; + + data = kzalloc(sizeof(*data), GFP_KERNEL); + if (!data) + return res; + mutex_init(&data->lock); + + /* Copy instance data */ + data->ver_major = fi_resp->major; + data->ver_minor = fi_resp->minor; + data->module_handle = fi_resp->module_handle; + for (i = 0; i < AEM2_NUM_ENERGY_REGS; i++) + data->power_period[i] = AEM_DEFAULT_POWER_INTERVAL; + + /* Create sub-device for this fw instance */ + if (aem_idr_get(&data->id)) + goto id_err; + + data->pdev = platform_device_alloc(DRVNAME, data->id); + if (!data->pdev) + goto dev_err; + data->pdev->dev.driver = &aem_driver; + + res = platform_device_add(data->pdev); + if (res) + goto ipmi_err; + + dev_set_drvdata(&data->pdev->dev, data); + + /* Set up IPMI interface */ + if (aem_init_ipmi_data(&data->ipmi, probe->interface, + probe->bmc_device)) + goto ipmi_err; + + /* Register with hwmon */ + data->hwmon_dev = hwmon_device_register(&data->pdev->dev); + + if (IS_ERR(data->hwmon_dev)) { + dev_err(&data->pdev->dev, "Unable to register hwmon " + "device for IPMI interface %d\n", + probe->interface); + goto hwmon_reg_err; + } + + data->update = update_aem2_sensors; + + /* Find sensors */ + if (aem2_find_sensors(data)) + goto sensor_err; + + /* Add to our list of AEM devices */ + list_add_tail(&data->list, &driver_data.aem_devices); + + dev_info(data->ipmi.bmc_device, "Found AEM v%d.%d at 0x%X\n", + data->ver_major, data->ver_minor, + data->module_handle); + return 0; + +sensor_err: + hwmon_device_unregister(data->hwmon_dev); +hwmon_reg_err: + ipmi_destroy_user(data->ipmi.user); +ipmi_err: + dev_set_drvdata(&data->pdev->dev, NULL); + platform_device_unregister(data->pdev); +dev_err: + aem_idr_put(data->id); +id_err: + kfree(data); + + return res; +} + +/* Find and initialize all AEM2 instances */ +static int aem_init_aem2(struct aem_ipmi_data *probe) +{ + struct aem_find_instance_resp fi_resp; + int err; + int i = 0; + + while (!aem_find_aem2(probe, &fi_resp, i)) { + if (fi_resp.major != 2) { + dev_err(probe->bmc_device, "Unknown AEM v%d; please " + "report this to the maintainer.\n", + fi_resp.major); + i++; + continue; + } + err = aem_init_aem2_inst(probe, &fi_resp); + if (err) { + dev_err(probe->bmc_device, + "Error %d initializing AEM2 0x%X\n", + err, fi_resp.module_handle); + return err; + } + i++; + } + + return 0; +} + +/* Probe a BMC for AEM firmware instances */ +static void aem_register_bmc(int iface, struct device *dev) +{ + struct aem_ipmi_data probe; + + if (aem_init_ipmi_data(&probe, iface, dev)) + return; + + /* Ignore probe errors; they won't cause problems */ + aem_init_aem1(&probe); + aem_init_aem2(&probe); + + ipmi_destroy_user(probe.user); +} + +/* Handle BMC deletion */ +static void aem_bmc_gone(int iface) +{ + struct aem_data *p1, *next1; + + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + if (p1->ipmi.interface == iface) + aem_delete(p1); +} + +/* sysfs support functions */ + +/* AEM device name */ +static ssize_t show_name(struct device *dev, struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%s%d\n", DRVNAME, data->ver_major); +} +static SENSOR_DEVICE_ATTR(name, S_IRUGO, show_name, NULL, 0); + +/* AEM device version */ +static ssize_t show_version(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct aem_data *data = dev_get_drvdata(dev); + + return sprintf(buf, "%d.%d\n", data->ver_major, data->ver_minor); +} +static SENSOR_DEVICE_ATTR(version, S_IRUGO, show_version, NULL, 0); + +/* Display power use */ +static ssize_t aem_show_power(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *data = dev_get_drvdata(dev); + u64 before, after, delta, time; + signed long leftover; + struct timespec b, a; + + mutex_lock(&data->lock); + update_aem_energy(data); + getnstimeofday(&b); + before = data->energy[attr->index]; + + leftover = schedule_timeout_interruptible( + msecs_to_jiffies(data->power_period[attr->index]) + ); + if (leftover) { + mutex_unlock(&data->lock); + return 0; + } + + update_aem_energy(data); + getnstimeofday(&a); + after = data->energy[attr->index]; + mutex_unlock(&data->lock); + + time = timespec_to_ns(&a) - timespec_to_ns(&b); + delta = (after - before) * UJ_PER_MJ; + + return sprintf(buf, "%llu\n", + (unsigned long long)div64_u64(delta * NSEC_PER_SEC, time)); +} + +/* Display energy use */ +static ssize_t aem_show_energy(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%llu\n", + (unsigned long long)a->energy[attr->index] * 1000); +} + +/* Display power interval registers */ +static ssize_t aem_show_power_period(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%lu\n", a->power_period[attr->index]); +} + +/* Set power interval registers */ +static ssize_t aem_set_power_period(struct device *dev, + struct device_attribute *devattr, + const char *buf, size_t count) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + unsigned long temp; + int res; + + res = strict_strtoul(buf, 10, &temp); + if (res) + return res; + + if (temp < AEM_MIN_POWER_INTERVAL) + return -EINVAL; + + mutex_lock(&a->lock); + a->power_period[attr->index] = temp; + mutex_unlock(&a->lock); + + return count; +} + +/* Discover sensors on an AEM device */ +static int aem_register_sensors(struct aem_data *data, + struct aem_ro_sensor_template *ro, + struct aem_rw_sensor_template *rw) +{ + struct device *dev = &data->pdev->dev; + struct sensor_device_attribute *sensors = data->sensors; + int err; + + /* Set up read-only sensors */ + while (ro->label) { + sensors->dev_attr.attr.name = ro->label; + sensors->dev_attr.attr.mode = S_IRUGO; + sensors->dev_attr.show = ro->show; + sensors->index = ro->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + ro++; + } + + /* Set up read-write sensors */ + while (rw->label) { + sensors->dev_attr.attr.name = rw->label; + sensors->dev_attr.attr.mode = S_IRUGO | S_IWUSR; + sensors->dev_attr.show = rw->show; + sensors->dev_attr.store = rw->set; + sensors->index = rw->index; + + err = device_create_file(dev, &sensors->dev_attr); + if (err) { + sensors->dev_attr.attr.name = NULL; + goto error; + } + sensors++; + rw++; + } + + err = device_create_file(dev, &sensor_dev_attr_name.dev_attr); + if (err) + goto error; + err = device_create_file(dev, &sensor_dev_attr_version.dev_attr); + return err; + +error: + aem_remove_sensors(data); + return err; +} + +/* sysfs support functions for AEM2 sensors */ + +/* Display temperature use */ +static ssize_t aem2_show_temp(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->temp[attr->index] * 1000); +} + +/* Display power-capping registers */ +static ssize_t aem2_show_pcap_value(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct aem_data *a = dev_get_drvdata(dev); + a->update(a); + + return sprintf(buf, "%u\n", a->pcap[attr->index] * 100000); +} + +/* Remove sensors attached to an AEM device */ +static void aem_remove_sensors(struct aem_data *data) +{ + int i; + + for (i = 0; i < AEM_NUM_SENSORS; i++) { + if (!data->sensors[i].dev_attr.attr.name) + continue; + device_remove_file(&data->pdev->dev, + &data->sensors[i].dev_attr); + } + + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_name.dev_attr); + device_remove_file(&data->pdev->dev, + &sensor_dev_attr_version.dev_attr); +} + +/* Sensor probe functions */ + +/* Description of AEM1 sensors */ +static struct aem_ro_sensor_template aem1_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"power1_average", aem_show_power, 0}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem1_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{NULL, NULL, NULL, 0}, +}; + +/* Description of AEM2 sensors */ +static struct aem_ro_sensor_template aem2_ro_sensors[] = { +{"energy1_input", aem_show_energy, 0}, +{"energy2_input", aem_show_energy, 1}, +{"power1_average", aem_show_power, 0}, +{"power2_average", aem_show_power, 1}, +{"temp1_input", aem2_show_temp, 0}, +{"temp2_input", aem2_show_temp, 1}, + +{"power4_average", aem2_show_pcap_value, POWER_CAP_MAX_HOTPLUG}, +{"power5_average", aem2_show_pcap_value, POWER_CAP_MAX}, +{"power6_average", aem2_show_pcap_value, POWER_CAP_MIN_WARNING}, +{"power7_average", aem2_show_pcap_value, POWER_CAP_MIN}, + +{"power3_average", aem2_show_pcap_value, POWER_AUX}, +{"power_cap", aem2_show_pcap_value, POWER_CAP}, +{NULL, NULL, 0}, +}; + +static struct aem_rw_sensor_template aem2_rw_sensors[] = { +{"power1_average_interval", aem_show_power_period, aem_set_power_period, 0}, +{"power2_average_interval", aem_show_power_period, aem_set_power_period, 1}, +{NULL, NULL, NULL, 0}, +}; + +/* Set up AEM1 sensor attrs */ +static int aem1_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem1_ro_sensors, aem1_rw_sensors); +} + +/* Set up AEM2 sensor attrs */ +static int aem2_find_sensors(struct aem_data *data) +{ + return aem_register_sensors(data, aem2_ro_sensors, aem2_rw_sensors); +} + +/* Module init/exit routines */ + +static int __init aem_init(void) +{ + int res; + + res = driver_register(&aem_driver); + if (res) { + printk(KERN_ERR "Can't register aem driver\n"); + return res; + } + + res = ipmi_smi_watcher_register(&driver_data.bmc_events); + if (res) + goto ipmi_reg_err; + return 0; + +ipmi_reg_err: + driver_unregister(&aem_driver); + return res; + +} + +static void __exit aem_exit(void) +{ + struct aem_data *p1, *next1; + + ipmi_smi_watcher_unregister(&driver_data.bmc_events); + driver_unregister(&aem_driver); + list_for_each_entry_safe(p1, next1, &driver_data.aem_devices, list) + aem_delete(p1); +} + +MODULE_AUTHOR("Darrick J. Wong "); +MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver"); +MODULE_LICENSE("GPL"); + +module_init(aem_init); +module_exit(aem_exit); -- cgit v0.10.2 From 9d5437a15884bfb3429aee99f76fc014c7de039a Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Fri, 23 May 2008 13:04:26 -0700 Subject: fix parenthesis in include/asm-mips/gic.h Parenthesis fix in include/asm-mips/gic.h Signed-off-by: Mariusz Kozlowski Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h index 01b2f92..3a492f2 100644 --- a/include/asm-mips/gic.h +++ b/include/asm-mips/gic.h @@ -330,7 +330,7 @@ #define GIC_SH_RMASK_OFS 0x0300 #define GIC_CLR_INTR_MASK(intr, val) \ - GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32)) + GICWRITE(GIC_REG_ADDR(SHARED, GIC_SH_RMASK_OFS + 4 + (((((intr) / 32) ^ 1) - 1) * 4)), ((val) << ((intr) % 32))) /* Register Map for Local Section */ #define GIC_VPE_CTL_OFS 0x0000 -- cgit v0.10.2 From 25829b0e977a7e396b284dad0f523099394390e7 Mon Sep 17 00:00:00 2001 From: Mariusz Kozlowski Date: Fri, 23 May 2008 13:04:28 -0700 Subject: fix parenthesis in include/asm-mips/mach-au1x00/au1000.h Parenthesis fix in include/asm-mips/mach-au1x00/au1000.h Signed-off-by: Mariusz Kozlowski Cc: Ralf Baechle Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 363a14e..1b5064d 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -1036,7 +1036,7 @@ enum soc_au1200_ints { #define USBD_INTSTAT 0xB020001C # define USBDEV_INT_SOF (1 << 12) # define USBDEV_INT_HF_BIT 6 -# define USBDEV_INT_HF_MASK 0x3f << USBDEV_INT_HF_BIT) +# define USBDEV_INT_HF_MASK (0x3f << USBDEV_INT_HF_BIT) # define USBDEV_INT_CMPLT_BIT 0 # define USBDEV_INT_CMPLT_MASK (0x3f << USBDEV_INT_CMPLT_BIT) #define USBD_CONFIG 0xB0200020 -- cgit v0.10.2 From 4b6f6ce97ecc20eb8f3ece3c8370faacfe73e8c2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ignacio=20Garc=C3=ADa=20P=C3=A9rez?= Date: Fri, 23 May 2008 13:04:28 -0700 Subject: serial: support for InstaShield IS-400 four port RS-232 PCI card MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Add support for the InstaShield IS-400 four port RS-232 PCI card. Signed-off-by: Ignacio GarcĂ­a PĂ©rez Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 53fa19c..788c3559 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -2602,7 +2602,12 @@ static struct pci_device_id serial_pci_tbl[] = { { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS200, PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0811 */ pbn_b2_2_115200 }, - + /* + * IntaShield IS-400 + */ + { PCI_VENDOR_ID_INTASHIELD, PCI_DEVICE_ID_INTASHIELD_IS400, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, /* 135a.0dc0 */ + pbn_b2_4_115200 }, /* * Perle PCI-RAS cards */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 342b55a..9b940e6 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1761,6 +1761,7 @@ #define PCI_VENDOR_ID_INTASHIELD 0x135a #define PCI_DEVICE_ID_INTASHIELD_IS200 0x0d80 +#define PCI_DEVICE_ID_INTASHIELD_IS400 0x0dc0 #define PCI_VENDOR_ID_QUATECH 0x135C #define PCI_DEVICE_ID_QUATECH_QSC100 0x0010 -- cgit v0.10.2 From 6c7c6afbb8c0e60d32a563cae7c6889211e9d9d8 Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Fri, 23 May 2008 13:04:29 -0700 Subject: types.h: don't expose struct ustat to userspace can't be used together with because they both define struct ustat: $ cat test.c #include #include $ gcc -c test.c In file included from test.c:2: /usr/include/linux/types.h:165: error: redefinition of 'struct ustat' has been reported a while ago to debian, but seems to have been lost in cat fighting: http://bugs.debian.org/429064 Signed-off-by: maximilian attems Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/types.h b/include/linux/types.h index 9dc2346..d4a9ce6 100644 --- a/include/linux/types.h +++ b/include/linux/types.h @@ -197,8 +197,6 @@ typedef u64 resource_size_t; typedef u32 resource_size_t; #endif -#endif /* __KERNEL__ */ - struct ustat { __kernel_daddr_t f_tfree; __kernel_ino_t f_tinode; @@ -206,4 +204,6 @@ struct ustat { char f_fpack[6]; }; +#endif /* __KERNEL__ */ + #endif /* _LINUX_TYPES_H */ -- cgit v0.10.2 From 80119ef5c8153e0a6cc5edf00c083dc98a9bd348 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 23 May 2008 13:04:31 -0700 Subject: mm: fix atomic_t overflow in vm The atomic_t type is 32bit but a 64bit system can have more than 2^32 pages of virtual address space available. Without this we overflow on ludicrously large mappings Signed-off-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 74a323d..32dc14c 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -139,7 +139,7 @@ static int meminfo_read_proc(char *page, char **start, off_t off, #define K(x) ((x) << (PAGE_SHIFT - 10)) si_meminfo(&i); si_swapinfo(&i); - committed = atomic_read(&vm_committed_space); + committed = atomic_long_read(&vm_committed_space); allowed = ((totalram_pages - hugetlb_total_pages()) * sysctl_overcommit_ratio / 100) + total_swap_pages; diff --git a/include/linux/mman.h b/include/linux/mman.h index 87920a0..dab8892 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -17,14 +17,14 @@ extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; -extern atomic_t vm_committed_space; +extern atomic_long_t vm_committed_space; #ifdef CONFIG_SMP extern void vm_acct_memory(long pages); #else static inline void vm_acct_memory(long pages) { - atomic_add(pages, &vm_committed_space); + atomic_long_add(pages, &vm_committed_space); } #endif diff --git a/mm/mmap.c b/mm/mmap.c index fac6633..669499e 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -80,7 +80,7 @@ EXPORT_SYMBOL(vm_get_page_prot); int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT; -atomic_t vm_committed_space = ATOMIC_INIT(0); +atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); /* * Check that a process has enough memory to allocate a new virtual @@ -177,7 +177,7 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) * cast `allowed' as a signed long because vm_committed_space * sometimes has a negative value */ - if (atomic_read(&vm_committed_space) < (long)allowed) + if (atomic_long_read(&vm_committed_space) < (long)allowed) return 0; error: vm_unacct_memory(pages); diff --git a/mm/nommu.c b/mm/nommu.c index ef8c62c..dca93fc 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -39,7 +39,7 @@ struct page *mem_map; unsigned long max_mapnr; unsigned long num_physpages; unsigned long askedalloc, realalloc; -atomic_t vm_committed_space = ATOMIC_INIT(0); +atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0); int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT; @@ -1410,7 +1410,7 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin) * cast `allowed' as a signed long because vm_committed_space * sometimes has a negative value */ - if (atomic_read(&vm_committed_space) < (long)allowed) + if (atomic_long_read(&vm_committed_space) < (long)allowed) return 0; error: vm_unacct_memory(pages); diff --git a/mm/swap.c b/mm/swap.c index 91e1944..45c9f25 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -503,7 +503,7 @@ void vm_acct_memory(long pages) local = &__get_cpu_var(committed_space); *local += pages; if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) { - atomic_add(*local, &vm_committed_space); + atomic_long_add(*local, &vm_committed_space); *local = 0; } preempt_enable(); @@ -520,7 +520,7 @@ static int cpu_swap_callback(struct notifier_block *nfb, committed = &per_cpu(committed_space, (long)hcpu); if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) { - atomic_add(*committed, &vm_committed_space); + atomic_long_add(*committed, &vm_committed_space); *committed = 0; drain_cpu_pagevecs((long)hcpu); } -- cgit v0.10.2 From 84255d1018c50e72c71a49f359989597d53a3f53 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:32 -0700 Subject: md: fix possible oops when removing a bitmap from an active array It is possible to add a write-intent bitmap to an active array, or remove the bitmap that is there. When we do with the 'quiesce' the array, which causes make_request to block in "wait_barrier()". However we are sampling the value of "mddev->bitmap" before the wait_barrier call, and using it afterwards. This can result in using a bitmap structure that has been freed. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index ac409b7..21629ae 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -773,7 +773,7 @@ static int make_request(struct request_queue *q, struct bio * bio) r1bio_t *r1_bio; struct bio *read_bio; int i, targets = 0, disks; - struct bitmap *bitmap = mddev->bitmap; + struct bitmap *bitmap; unsigned long flags; struct bio_list bl; struct page **behind_pages = NULL; @@ -802,6 +802,8 @@ static int make_request(struct request_queue *q, struct bio * bio) wait_barrier(conf); + bitmap = mddev->bitmap; + disk_stat_inc(mddev->gendisk, ios[rw]); disk_stat_add(mddev->gendisk, sectors[rw], bio_sectors(bio)); -- cgit v0.10.2 From 03de250a269bfa8e6a9e6ccb4a1dbce19dae8a61 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 23 May 2008 13:04:33 -0700 Subject: md: proper extern for mdp_major This patch adds a proper extern for mdp_major in include/linux/raid/md.h Signed-off-by: Adrian Bunk Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/raid/md.h b/include/linux/raid/md.h index 81a1a02..b7386ae 100644 --- a/include/linux/raid/md.h +++ b/include/linux/raid/md.h @@ -72,6 +72,8 @@ */ #define MD_PATCHLEVEL_VERSION 3 +extern int mdp_major; + extern int register_md_personality (struct mdk_personality *p); extern int unregister_md_personality (struct mdk_personality *p); extern mdk_thread_t * md_register_thread (void (*run) (mddev_t *mddev), diff --git a/init/do_mounts_md.c b/init/do_mounts_md.c index 7473b0c..693d246 100644 --- a/init/do_mounts_md.c +++ b/init/do_mounts_md.c @@ -24,7 +24,6 @@ static struct { static int md_setup_ents __initdata; -extern int mdp_major; /* * Parse the command-line parameters given our kernel, but do not * actually try to invoke the MD device now; that is handled by -- cgit v0.10.2 From 6bcfd601861cce45ca73ac1d714f1286b6b3f0d4 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Fri, 23 May 2008 13:04:34 -0700 Subject: md: kill file_path wrapper Kill the trivial and rather pointless file_path wrapper around d_path. Signed-off-by: Christoph Hellwig Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index c14dacd..b26927c 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -203,17 +203,6 @@ static void bitmap_checkfree(struct bitmap *bitmap, unsigned long page) * bitmap file handling - read and write the bitmap file and its superblock */ -/* copy the pathname of a file to a buffer */ -char *file_path(struct file *file, char *buf, int count) -{ - if (!buf) - return NULL; - - buf = d_path(&file->f_path, buf, count); - - return IS_ERR(buf) ? NULL : buf; -} - /* * basic page I/O operations */ @@ -721,11 +710,13 @@ static void bitmap_file_kick(struct bitmap *bitmap) if (bitmap->file) { path = kmalloc(PAGE_SIZE, GFP_KERNEL); if (path) - ptr = file_path(bitmap->file, path, PAGE_SIZE); + ptr = d_path(&bitmap->file->f_path, path, + PAGE_SIZE); + printk(KERN_ALERT "%s: kicking failed bitmap file %s from array!\n", - bmname(bitmap), ptr ? ptr : ""); + bmname(bitmap), IS_ERR(ptr) ? "" : ptr); kfree(path); } else diff --git a/drivers/md/md.c b/drivers/md/md.c index 83eb78b..d31aa6f 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3987,8 +3987,8 @@ static int get_bitmap_file(mddev_t * mddev, void __user * arg) if (!buf) goto out; - ptr = file_path(mddev->bitmap->file, buf, sizeof(file->pathname)); - if (!ptr) + ptr = d_path(&mddev->bitmap->file->f_path, buf, sizeof(file->pathname)); + if (IS_ERR(ptr)) goto out; strcpy(file->pathname, ptr); diff --git a/include/linux/raid/bitmap.h b/include/linux/raid/bitmap.h index 47fbcba..78bfdea 100644 --- a/include/linux/raid/bitmap.h +++ b/include/linux/raid/bitmap.h @@ -262,7 +262,6 @@ int bitmap_create(mddev_t *mddev); void bitmap_flush(mddev_t *mddev); void bitmap_destroy(mddev_t *mddev); -char *file_path(struct file *file, char *buf, int count); void bitmap_print_sb(struct bitmap *bitmap); void bitmap_update_sb(struct bitmap *bitmap); -- cgit v0.10.2 From 6be9d4940134b36f9ed020aead36f831f19b49f1 Mon Sep 17 00:00:00 2001 From: Bernd Schubert Date: Fri, 23 May 2008 13:04:34 -0700 Subject: md: md: raid5 rate limit error printk Last night we had scsi problems and a hardware raid unit was offlined during heavy i/o. While this happened we got for about 3 minutes a huge number messages like these Apr 12 03:36:07 pfs1n14 kernel: [197510.696595] raid5:md7: read error not correctable (sector 2993096568 on sdj2). I guess the high error rate is responsible for not scheduling other events - during this time the system was not pingable and in the end also other devices run into scsi command timeouts causing problems on these unrelated devices as well. Signed-off-by: Bernd Schubert Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 93fde48..2f28745 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -94,6 +94,8 @@ #define __inline__ #endif +#define printk_rl(args...) ((void) (printk_ratelimit() && printk(args))) + #if !RAID6_USE_EMPTY_ZERO_PAGE /* In .bss so it's zeroed */ const char raid6_empty_zero_page[PAGE_SIZE] __attribute__((aligned(256))); @@ -1143,10 +1145,12 @@ static void raid5_end_read_request(struct bio * bi, int error) set_bit(R5_UPTODATE, &sh->dev[i].flags); if (test_bit(R5_ReadError, &sh->dev[i].flags)) { rdev = conf->disks[i].rdev; - printk(KERN_INFO "raid5:%s: read error corrected (%lu sectors at %llu on %s)\n", - mdname(conf->mddev), STRIPE_SECTORS, - (unsigned long long)(sh->sector + rdev->data_offset), - bdevname(rdev->bdev, b)); + printk_rl(KERN_INFO "raid5:%s: read error corrected" + " (%lu sectors at %llu on %s)\n", + mdname(conf->mddev), STRIPE_SECTORS, + (unsigned long long)(sh->sector + + rdev->data_offset), + bdevname(rdev->bdev, b)); clear_bit(R5_ReadError, &sh->dev[i].flags); clear_bit(R5_ReWrite, &sh->dev[i].flags); } @@ -1160,16 +1164,22 @@ static void raid5_end_read_request(struct bio * bi, int error) clear_bit(R5_UPTODATE, &sh->dev[i].flags); atomic_inc(&rdev->read_errors); if (conf->mddev->degraded) - printk(KERN_WARNING "raid5:%s: read error not correctable (sector %llu on %s).\n", - mdname(conf->mddev), - (unsigned long long)(sh->sector + rdev->data_offset), - bdn); + printk_rl(KERN_WARNING + "raid5:%s: read error not correctable " + "(sector %llu on %s).\n", + mdname(conf->mddev), + (unsigned long long)(sh->sector + + rdev->data_offset), + bdn); else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) /* Oh, no!!! */ - printk(KERN_WARNING "raid5:%s: read error NOT corrected!! (sector %llu on %s).\n", - mdname(conf->mddev), - (unsigned long long)(sh->sector + rdev->data_offset), - bdn); + printk_rl(KERN_WARNING + "raid5:%s: read error NOT corrected!! " + "(sector %llu on %s).\n", + mdname(conf->mddev), + (unsigned long long)(sh->sector + + rdev->data_offset), + bdn); else if (atomic_read(&rdev->read_errors) > conf->max_nr_stripes) printk(KERN_WARNING -- cgit v0.10.2 From 698b18c1e8bddf39cbf1ba50792b0fe302dbe6d6 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:35 -0700 Subject: md: raid1: Fix restoration of bio between failed read and write. When performing a "recovery" or "check" pass on a RAID1 array, we read from each device and possible, if there is a difference or a read error, write back to some devices. We use the same 'bio' for both read and write, resetting various fields between the two operations. We forgot to reset bv_offset and bv_len however. These are often left unchanged, but in the case where there is an IO error one or two sectors into a page, they are changed. This results in correctable errors not being corrected properly. It does not result in any data corruption. Cc: "Fairbanks, David" Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 21629ae..d0f4021 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1284,6 +1284,7 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) rdev_dec_pending(conf->mirrors[i].rdev, mddev); } else { /* fixup the bio for reuse */ + int size; sbio->bi_vcnt = vcnt; sbio->bi_size = r1_bio->sectors << 9; sbio->bi_idx = 0; @@ -1297,10 +1298,20 @@ static void sync_request_write(mddev_t *mddev, r1bio_t *r1_bio) sbio->bi_sector = r1_bio->sector + conf->mirrors[i].rdev->data_offset; sbio->bi_bdev = conf->mirrors[i].rdev->bdev; - for (j = 0; j < vcnt ; j++) - memcpy(page_address(sbio->bi_io_vec[j].bv_page), + size = sbio->bi_size; + for (j = 0; j < vcnt ; j++) { + struct bio_vec *bi; + bi = &sbio->bi_io_vec[j]; + bi->bv_offset = 0; + if (size > PAGE_SIZE) + bi->bv_len = PAGE_SIZE; + else + bi->bv_len = size; + size -= PAGE_SIZE; + memcpy(page_address(bi->bv_page), page_address(pbio->bi_io_vec[j].bv_page), PAGE_SIZE); + } } } -- cgit v0.10.2 From 09a44cc15079f80c1416cde1a1d5b2cdd8f2118a Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:36 -0700 Subject: md: notify userspace on 'write-pending' changes to array_state When an array enters write pending, 'array_state' changes, so we must be sure to sysfs_notify. Also, when waiting for user-space to acknowledge 'write-pending' by marking the metadata as dirty, we don't want to wait for MD_CHANGE_DEVS to be cleared as that might not happen. So explicity test for the bits that we are really interested in. Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index d31aa6f..52f9865 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5435,8 +5435,11 @@ void md_write_start(mddev_t *mddev, struct bio *bi) md_wakeup_thread(mddev->thread); } spin_unlock_irq(&mddev->write_lock); + sysfs_notify(&mddev->kobj, NULL, "array_state"); } - wait_event(mddev->sb_wait, mddev->flags==0); + wait_event(mddev->sb_wait, + !test_bit(MD_CHANGE_CLEAN, &mddev->flags) && + !test_bit(MD_CHANGE_PENDING, &mddev->flags)); } void md_write_end(mddev_t *mddev) @@ -5471,6 +5474,12 @@ void md_allow_write(mddev_t *mddev) mddev->safemode = 1; spin_unlock_irq(&mddev->write_lock); md_update_sb(mddev, 0); + + sysfs_notify(&mddev->kobj, NULL, "array_state"); + /* wait for the dirty state to be recorded in the metadata */ + wait_event(mddev->sb_wait, + !test_bit(MD_CHANGE_CLEAN, &mddev->flags) && + !test_bit(MD_CHANGE_PENDING, &mddev->flags)); } else spin_unlock_irq(&mddev->write_lock); } -- cgit v0.10.2 From 4f54b0e9485644a3c5fca2ae43bcbe7376825747 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 23 May 2008 13:04:37 -0700 Subject: md: notify userspace on 'stop' events This additional notification to 'array_state' is needed to allow the monitor application to learn about stop events via sysfs. The sysfs_notify("sync_action") call that comes at the end of do_md_stop() (via md_new_event) is insufficient since the 'sync_action' attribute has been removed by this point. (Seems like a sysfs-notify-on-removal patch is a better fix. Currently removal updates the event count but does not wake up waiters) Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index 52f9865..e57213d 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3691,6 +3691,8 @@ static int do_md_stop(mddev_t * mddev, int mode) module_put(mddev->pers->owner); mddev->pers = NULL; + /* tell userspace to handle 'inactive' */ + sysfs_notify(&mddev->kobj, NULL, "array_state"); set_capacity(disk, 0); mddev->changed = 1; -- cgit v0.10.2 From 90b08710e41a07d4ff0fb8940dcce3a552991a56 Mon Sep 17 00:00:00 2001 From: Bernd Schubert Date: Fri, 23 May 2008 13:04:38 -0700 Subject: md: allow parallel resync of md-devices. In some configurations, a raid6 resync can be limited by CPU speed (Calculating P and Q and moving data) rather than by device speed. In these cases there is nothing to be gained byt serialising resync of arrays that share a device, and doing the resync in parallel can provide benefit. So add a sysfs tunable to flag an array as being allowed to resync in parallel with other arrays that use (a different part of) the same device. Signed-off-by: Bernd Schubert Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index e57213d..295be1a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(pers_lock); static void md_print_devices(void); +static DECLARE_WAIT_QUEUE_HEAD(resync_wait); + #define MD_BUG(x...) { printk("md: bug in file %s, line %d\n", __FILE__, __LINE__); md_print_devices(); } /* @@ -3013,6 +3015,36 @@ degraded_show(mddev_t *mddev, char *page) static struct md_sysfs_entry md_degraded = __ATTR_RO(degraded); static ssize_t +sync_force_parallel_show(mddev_t *mddev, char *page) +{ + return sprintf(page, "%d\n", mddev->parallel_resync); +} + +static ssize_t +sync_force_parallel_store(mddev_t *mddev, const char *buf, size_t len) +{ + long n; + + if (strict_strtol(buf, 10, &n)) + return -EINVAL; + + if (n != 0 && n != 1) + return -EINVAL; + + mddev->parallel_resync = n; + + if (mddev->sync_thread) + wake_up(&resync_wait); + + return len; +} + +/* force parallel resync, even with shared block devices */ +static struct md_sysfs_entry md_sync_force_parallel = +__ATTR(sync_force_parallel, S_IRUGO|S_IWUSR, + sync_force_parallel_show, sync_force_parallel_store); + +static ssize_t sync_speed_show(mddev_t *mddev, char *page) { unsigned long resync, dt, db; @@ -3187,6 +3219,7 @@ static struct attribute *md_redundancy_attrs[] = { &md_sync_min.attr, &md_sync_max.attr, &md_sync_speed.attr, + &md_sync_force_parallel.attr, &md_sync_completed.attr, &md_max_sync.attr, &md_suspend_lo.attr, @@ -5487,8 +5520,6 @@ void md_allow_write(mddev_t *mddev) } EXPORT_SYMBOL_GPL(md_allow_write); -static DECLARE_WAIT_QUEUE_HEAD(resync_wait); - #define SYNC_MARKS 10 #define SYNC_MARK_STEP (3*HZ) void md_do_sync(mddev_t *mddev) @@ -5552,8 +5583,9 @@ void md_do_sync(mddev_t *mddev) for_each_mddev(mddev2, tmp) { if (mddev2 == mddev) continue; - if (mddev2->curr_resync && - match_mddev_units(mddev,mddev2)) { + if (!mddev->parallel_resync + && mddev2->curr_resync + && match_mddev_units(mddev, mddev2)) { DEFINE_WAIT(wq); if (mddev < mddev2 && mddev->curr_resync == 2) { /* arbitrarily yield */ diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index 812ffa5..a6d7ab6 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -180,6 +180,9 @@ struct mddev_s int sync_speed_min; int sync_speed_max; + /* resync even though the same disks are shared among md-devices */ + int parallel_resync; + int ok_start_degraded; /* recovery/resync flags * NEEDED: we might need to start a resync/recover -- cgit v0.10.2 From dfc7064500061677720fa26352963c772d3ebe6b Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Fri, 23 May 2008 13:04:39 -0700 Subject: md: restart recovery cleanly after device failure. When we get any IO error during a recovery (rebuilding a spare), we abort the recovery and restart it. For RAID6 (and multi-drive RAID1) it may not be best to restart at the beginning: when multiple failures can be tolerated, the recovery may be able to continue and re-doing all that has already been done doesn't make sense. We already have the infrastructure to record where a recovery is up to and restart from there, but it is not being used properly. This is because: - We sometimes abort with MD_RECOVERY_ERR rather than just MD_RECOVERY_INTR, which causes the recovery not be be checkpointed. - We remove spares and then re-added them which loses important state information. The distinction between MD_RECOVERY_ERR and MD_RECOVERY_INTR really isn't needed. If there is an error, the relevant drive will be marked as Faulty, and that is enough to ensure correct handling of the error. So we first remove MD_RECOVERY_ERR, changing some of the uses of it to MD_RECOVERY_INTR. Then we cause the attempt to remove a non-faulty device from an array to fail (unless recovery is impossible as the array is too degraded). Then when remove_and_add_spares attempts to remove the devices on which recovery can continue, it will fail, they will remain in place, and recovery will continue on them as desired. Issue: If we are halfway through rebuilding a spare and another drive fails, and a new spare is immediately available, do we want to: 1/ complete the current rebuild, then go back and rebuild the new spare or 2/ restart the rebuild from the start and rebuild both devices in parallel. Both options can be argued for. The code currently takes option 2 as a/ this requires least code change b/ this results in a minimally-degraded array in minimal time. Cc: "Eivind Sarto" Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index 295be1a..51c19f8 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -5434,7 +5434,7 @@ void md_done_sync(mddev_t *mddev, int blocks, int ok) atomic_sub(blocks, &mddev->recovery_active); wake_up(&mddev->recovery_wait); if (!ok) { - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); md_wakeup_thread(mddev->thread); // stop recovery, signal do_sync .... } @@ -5690,7 +5690,7 @@ void md_do_sync(mddev_t *mddev) sectors = mddev->pers->sync_request(mddev, j, &skipped, currspeed < speed_min(mddev)); if (sectors == 0) { - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); goto out; } @@ -5713,8 +5713,7 @@ void md_do_sync(mddev_t *mddev) last_check = io_sectors; - if (test_bit(MD_RECOVERY_INTR, &mddev->recovery) || - test_bit(MD_RECOVERY_ERR, &mddev->recovery)) + if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) break; repeat: @@ -5768,8 +5767,7 @@ void md_do_sync(mddev_t *mddev) /* tell personality that we are finished */ mddev->pers->sync_request(mddev, max_sectors, &skipped, 1); - if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) && - !test_bit(MD_RECOVERY_CHECK, &mddev->recovery) && + if (!test_bit(MD_RECOVERY_CHECK, &mddev->recovery) && mddev->curr_resync > 2) { if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) { if (test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { @@ -5838,7 +5836,10 @@ static int remove_and_add_spares(mddev_t *mddev) } if (mddev->degraded) { - rdev_for_each(rdev, rtmp, mddev) + rdev_for_each(rdev, rtmp, mddev) { + if (rdev->raid_disk >= 0 && + !test_bit(In_sync, &rdev->flags)) + spares++; if (rdev->raid_disk < 0 && !test_bit(Faulty, &rdev->flags)) { rdev->recovery_offset = 0; @@ -5856,6 +5857,7 @@ static int remove_and_add_spares(mddev_t *mddev) } else break; } + } } return spares; } @@ -5869,7 +5871,7 @@ static int remove_and_add_spares(mddev_t *mddev) * to do that as needed. * When it is determined that resync is needed, we set MD_RECOVERY_RUNNING in * "->recovery" and create a thread at ->sync_thread. - * When the thread finishes it sets MD_RECOVERY_DONE (and might set MD_RECOVERY_ERR) + * When the thread finishes it sets MD_RECOVERY_DONE * and wakeups up this thread which will reap the thread and finish up. * This thread also removes any faulty devices (with nr_pending == 0). * @@ -5944,8 +5946,7 @@ void md_check_recovery(mddev_t *mddev) /* resync has finished, collect result */ md_unregister_thread(mddev->sync_thread); mddev->sync_thread = NULL; - if (!test_bit(MD_RECOVERY_ERR, &mddev->recovery) && - !test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { /* success...*/ /* activate any spares */ mddev->pers->spare_active(mddev); @@ -5969,7 +5970,6 @@ void md_check_recovery(mddev_t *mddev) * might be left set */ clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); - clear_bit(MD_RECOVERY_ERR, &mddev->recovery); clear_bit(MD_RECOVERY_INTR, &mddev->recovery); clear_bit(MD_RECOVERY_DONE, &mddev->recovery); diff --git a/drivers/md/multipath.c b/drivers/md/multipath.c index 4f4d1f3..e968116 100644 --- a/drivers/md/multipath.c +++ b/drivers/md/multipath.c @@ -327,7 +327,8 @@ static int multipath_remove_disk(mddev_t *mddev, int number) if (rdev) { if (test_bit(In_sync, &rdev->flags) || atomic_read(&rdev->nr_pending)) { - printk(KERN_ERR "hot-remove-disk, slot %d is identified" " but is still operational!\n", number); + printk(KERN_ERR "hot-remove-disk, slot %d is identified" + " but is still operational!\n", number); err = -EBUSY; goto abort; } diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index d0f4021..c610b94 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -1027,7 +1027,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) /* * if recovery is running, make sure it aborts. */ - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); } else set_bit(Faulty, &rdev->flags); set_bit(MD_CHANGE_DEVS, &mddev->flags); @@ -1148,6 +1148,14 @@ static int raid1_remove_disk(mddev_t *mddev, int number) err = -EBUSY; goto abort; } + /* Only remove non-faulty devices is recovery + * is not possible. + */ + if (!test_bit(Faulty, &rdev->flags) && + mddev->degraded < conf->raid_disks) { + err = -EBUSY; + goto abort; + } p->rdev = NULL; synchronize_rcu(); if (atomic_read(&rdev->nr_pending)) { diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 8536ede..1de17da 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1020,7 +1020,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) /* * if recovery is running, make sure it aborts. */ - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); } set_bit(Faulty, &rdev->flags); set_bit(MD_CHANGE_DEVS, &mddev->flags); @@ -1171,6 +1171,14 @@ static int raid10_remove_disk(mddev_t *mddev, int number) err = -EBUSY; goto abort; } + /* Only remove faulty devices in recovery + * is not possible. + */ + if (!test_bit(Faulty, &rdev->flags) && + enough(conf)) { + err = -EBUSY; + goto abort; + } p->rdev = NULL; synchronize_rcu(); if (atomic_read(&rdev->nr_pending)) { @@ -1237,6 +1245,7 @@ static void end_sync_write(struct bio *bio, int error) if (!uptodate) md_error(mddev, conf->mirrors[d].rdev); + update_head_pos(i, r10_bio); while (atomic_dec_and_test(&r10_bio->remaining)) { @@ -1844,7 +1853,8 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i if (rb2) atomic_dec(&rb2->remaining); r10_bio = rb2; - if (!test_and_set_bit(MD_RECOVERY_ERR, &mddev->recovery)) + if (!test_and_set_bit(MD_RECOVERY_INTR, + &mddev->recovery)) printk(KERN_INFO "raid10: %s: insufficient working devices for recovery.\n", mdname(mddev)); break; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 2f28745..425958a 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -1268,7 +1268,7 @@ static void error(mddev_t *mddev, mdk_rdev_t *rdev) /* * if recovery was running, make sure it aborts. */ - set_bit(MD_RECOVERY_ERR, &mddev->recovery); + set_bit(MD_RECOVERY_INTR, &mddev->recovery); } set_bit(Faulty, &rdev->flags); printk (KERN_ALERT @@ -4574,6 +4574,14 @@ static int raid5_remove_disk(mddev_t *mddev, int number) err = -EBUSY; goto abort; } + /* Only remove non-faulty devices if recovery + * isn't possible. + */ + if (!test_bit(Faulty, &rdev->flags) && + mddev->degraded <= conf->max_degraded) { + err = -EBUSY; + goto abort; + } p->rdev = NULL; synchronize_rcu(); if (atomic_read(&rdev->nr_pending)) { diff --git a/include/linux/raid/md_k.h b/include/linux/raid/md_k.h index a6d7ab6..3dea9f5 100644 --- a/include/linux/raid/md_k.h +++ b/include/linux/raid/md_k.h @@ -188,8 +188,7 @@ struct mddev_s * NEEDED: we might need to start a resync/recover * RUNNING: a thread is running, or about to be started * SYNC: actually doing a resync, not a recovery - * ERR: and IO error was detected - abort the resync/recovery - * INTR: someone requested a (clean) early abort. + * INTR: resync needs to be aborted for some reason * DONE: thread is done and is waiting to be reaped * REQUEST: user-space has requested a sync (used with SYNC) * CHECK: user-space request for for check-only, no repair @@ -199,7 +198,6 @@ struct mddev_s */ #define MD_RECOVERY_RUNNING 0 #define MD_RECOVERY_SYNC 1 -#define MD_RECOVERY_ERR 2 #define MD_RECOVERY_INTR 3 #define MD_RECOVERY_DONE 4 #define MD_RECOVERY_NEEDED 5 -- cgit v0.10.2 From da7978b0348d497688541e2d2f5739aa2a2c334f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 23 May 2008 13:04:41 -0700 Subject: signals: fix sigqueue_free() vs __exit_signal() race __exit_signal() does flush_sigqueue(tsk->pending) outside of ->siglock. This can race with another thread doing sigqueue_free(), we can free the same SIGQUEUE_PREALLOC sigqueue twice or corrupt the pending->list. Note that even sys_exit_group() can trigger this race, not only sys_timer_delete(). Move the callsite of flush_sigqueue(tsk->pending) under ->siglock. This patch doesn't touch flush_sigqueue(->shared_pending) below, it is called when there are no other threads which can play with signals, and sigqueue_free() can't be used outside of our thread group. Signed-off-by: Oleg Nesterov Acked-by: Roland McGrath Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/exit.c b/kernel/exit.c index 1510f78..8f6185e 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -126,6 +126,12 @@ static void __exit_signal(struct task_struct *tsk) __unhash_process(tsk); + /* + * Do this under ->siglock, we can race with another thread + * doing sigqueue_free() if we have SIGQUEUE_PREALLOC signals. + */ + flush_sigqueue(&tsk->pending); + tsk->signal = NULL; tsk->sighand = NULL; spin_unlock(&sighand->siglock); @@ -133,7 +139,6 @@ static void __exit_signal(struct task_struct *tsk) __cleanup_sighand(sighand); clear_tsk_thread_flag(tsk,TIF_SIGPENDING); - flush_sigqueue(&tsk->pending); if (sig) { flush_sigqueue(&sig->shared_pending); taskstats_tgid_free(sig); diff --git a/kernel/signal.c b/kernel/signal.c index 72bb4f5..12ffea7 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1242,7 +1242,8 @@ void sigqueue_free(struct sigqueue *q) /* * If the signal is still pending remove it from the * pending queue. We must hold ->siglock while testing - * q->list to serialize with collect_signal(). + * q->list to serialize with collect_signal() or with + * __exit_signal()->flush_sigqueue(). */ spin_lock_irqsave(lock, flags); if (!list_empty(&q->list)) -- cgit v0.10.2 From 69292b342193d4068f6435660368ff98713d8164 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 23 May 2008 13:04:42 -0700 Subject: gpio: pca953x driver handles pca9554 too Teach drivers/gpio/pca953x.c about PCA9554, another compatible chip. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 93f9167..7e40e8a 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -30,6 +30,7 @@ static const struct i2c_device_id pca953x_id[] = { { "pca9537", 4, }, { "pca9538", 8, }, { "pca9539", 16, }, + { "pca9554", 8, }, { "pca9555", 16, }, { "pca9557", 8, }, /* REVISIT several pca955x parts should work here too */ -- cgit v0.10.2 From 1d1c1d9b557a12320174058d2d313ffb0f8611f4 Mon Sep 17 00:00:00 2001 From: Roel Kluin <12o3l@tiscali.nl> Date: Fri, 23 May 2008 13:04:43 -0700 Subject: gpio: mcp23s08 debug fix The return value of mcp23s08_read_regs() can only be evaluated when signed Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpio/mcp23s08.c b/drivers/gpio/mcp23s08.c index 7fb5b9d..7f92fdd 100644 --- a/drivers/gpio/mcp23s08.c +++ b/drivers/gpio/mcp23s08.c @@ -168,7 +168,7 @@ static void mcp23s08_dbg_show(struct seq_file *s, struct gpio_chip *chip) { struct mcp23s08 *mcp; char bank; - unsigned t; + int t; unsigned mask; mcp = container_of(chip, struct mcp23s08, chip); -- cgit v0.10.2 From bff5fda972dc23bd1806a47c2098ae173585d013 Mon Sep 17 00:00:00 2001 From: Trent Piepho Date: Fri, 23 May 2008 13:04:44 -0700 Subject: gpiolib: fix off by one errors The last gpio belonging to a chip is chip->base + chip->ngpios - 1. Some places in the code, but not all, forgot the critical minus one. Signed-off-by: Trent Piepho Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 7f138c6..beaf6b3 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -127,7 +127,7 @@ int __init gpiochip_reserve(int start, int ngpio) unsigned long flags; int i; - if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio)) + if (!gpio_is_valid(start) || !gpio_is_valid(start + ngpio - 1)) return -EINVAL; spin_lock_irqsave(&gpio_lock, flags); @@ -170,7 +170,7 @@ int gpiochip_add(struct gpio_chip *chip) unsigned id; int base = chip->base; - if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio)) + if ((!gpio_is_valid(base) || !gpio_is_valid(base + chip->ngpio - 1)) && base >= 0) { status = -EINVAL; goto fail; @@ -207,7 +207,7 @@ fail: /* failures here can mean systems won't boot... */ if (status) pr_err("gpiochip_add: gpios %d..%d (%s) not registered\n", - chip->base, chip->base + chip->ngpio, + chip->base, chip->base + chip->ngpio - 1, chip->label ? : "generic"); return status; } -- cgit v0.10.2 From 6089093e588ee3f6aed99d08b1cf5ea37c52cf97 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Fri, 23 May 2008 13:04:45 -0700 Subject: ip2: fix crashes on load/unload This doesn't need to be two modules, and making it one cleans up the problem Signed-off-by: Alan Cox Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/ip2/Makefile b/drivers/char/ip2/Makefile index 6bfe254..939618f 100644 --- a/drivers/char/ip2/Makefile +++ b/drivers/char/ip2/Makefile @@ -2,7 +2,7 @@ # Makefile for the Computone IntelliPort Plus Driver # -obj-$(CONFIG_COMPUTONE) += ip2.o ip2main.o +obj-$(CONFIG_COMPUTONE) += ip2.o -ip2-objs := ip2base.o +ip2-objs := ip2base.o ip2main.o diff --git a/drivers/char/ip2/ip2main.c b/drivers/char/ip2/ip2main.c index 70957ac..c12cf8f 100644 --- a/drivers/char/ip2/ip2main.c +++ b/drivers/char/ip2/ip2main.c @@ -346,27 +346,6 @@ have_requested_irq( char irq ) } /******************************************************************************/ -/* Function: init_module() */ -/* Parameters: None */ -/* Returns: Success (0) */ -/* */ -/* Description: */ -/* This is a required entry point for an installable module. It simply calls */ -/* the driver initialisation function and returns what it returns. */ -/******************************************************************************/ -#ifdef MODULE -static int __init -ip2_init_module(void) -{ -#ifdef IP2DEBUG_INIT - printk (KERN_DEBUG "Loading module ...\n" ); -#endif - return 0; -} -module_init(ip2_init_module); -#endif /* MODULE */ - -/******************************************************************************/ /* Function: cleanup_module() */ /* Parameters: None */ /* Returns: Nothing */ @@ -779,8 +758,6 @@ out: return err; } -EXPORT_SYMBOL(ip2_loadmain); - /******************************************************************************/ /* Function: ip2_init_board() */ /* Parameters: Index of board in configuration structure */ -- cgit v0.10.2 From 53978d0a7a27eb036b9bf33c4caa06257a9dbed7 Mon Sep 17 00:00:00 2001 From: Marcin Krol Date: Fri, 23 May 2008 13:04:46 -0700 Subject: brd: don't show ramdisks in /proc/partitions In 2.6.25, ramdisk devices show up in /proc/partitions, which is a behaviour change from the old rd.c. Add GENHD_FL_SUPPRESS_PARTITION_INFO, which was present in rd.c. All kernels prior to 2.6.25 weren't displaying ramdisks in /proc/partitions. Since there are many userspace tools using information from /proc/partitions some of them may now behave incorrectly (I didn't tested any though). For example before 2.6.25 /proc/partitions was empty if no block devices like hard disks and such were detected by kernel. Now all 16 ramdisks are always visible there. Some software may rely on such information (I mean, on empty /proc/partitions). There was quite similar situation back in 2004, and ramdisks were excluded back from displaying. Thats why I called this a regression (maybe a bit unfortunate). See this patch for info: http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.3-rc2/2.6.3-rc2-mm1/broken-out/nbd-proc-partitions-fix.patch I also think that someone somewhere (long time ago) excluded ramdisks from /proc/partitions for good reasons. It is possible that now such new "feature" is harmless, but I think there are more chances that someone will say "hey, /proc/partitions has changed, now my software doesn't work" then "hey where did my new 2.6.25 feature go". nbd devices are also excluded, maybe for very same (unknown to me) reasons. Signed-off-by: Marcin Krol Signed-off-by: Nick Piggin Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/brd.c b/drivers/block/brd.c index a196ef7..680cdfc 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -447,6 +447,7 @@ static struct brd_device *brd_alloc(int i) disk->fops = &brd_fops; disk->private_data = brd; disk->queue = brd->brd_queue; + disk->flags |= GENHD_FL_SUPPRESS_PARTITION_INFO; sprintf(disk->disk_name, "ram%d", i); set_capacity(disk, rd_size * 2); -- cgit v0.10.2 From c4185a0e019387f5ad6e99009804965531fa1fab Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Fri, 23 May 2008 13:04:47 -0700 Subject: proc: proc_get_inode() should get module only once Any file under /proc/net opened more than once leaked the refcounter on the module it belongs to. The problem is that module_get is called for each file opening while module_put is called only when /proc inode is destroyed. So, lets put module counter if we are dealing with already initialised inode. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=10737 Signed-off-by: Denis V. Lunev Cc: David Miller Cc: Patrick McHardy Acked-by: Pavel Emelyanov Acked-by: Robert Olsson Acked-by: Eric W. Biederman Reported-by: Roland Kletzing Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/inode.c b/fs/proc/inode.c index 6f4e8dc..b08d100 100644 --- a/fs/proc/inode.c +++ b/fs/proc/inode.c @@ -425,7 +425,8 @@ struct inode *proc_get_inode(struct super_block *sb, unsigned int ino, } } unlock_new_inode(inode); - } + } else + module_put(de->owner); return inode; out_ino: -- cgit v0.10.2 From 03a74dcc7eebe6edd778317e82fafdf71e68488c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Fri, 23 May 2008 13:04:49 -0700 Subject: serial: fix enable_irq_wake/disable_irq_wake imbalance in serial_core.c enable_irq_wake() and disable_irq_wake() need to be balanced. However, serial_core.c calls these for different conditions during the suspend and resume functions... This is causing a regular WARN_ON() as found at http://www.kerneloops.org/search.php?search=set_irq_wake This patch makes the conditions for triggering the _wake enable/disable sequence identical. Signed-off-by: Arjan van de Ven Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index eab0327..53b03c6 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -2054,6 +2054,8 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *port) int uart_resume_port(struct uart_driver *drv, struct uart_port *port) { struct uart_state *state = drv->state + port->line; + struct device *tty_dev; + struct uart_match match = {port, drv}; mutex_lock(&state->mutex); @@ -2063,7 +2065,8 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *port) return 0; } - if (!port->suspended) { + tty_dev = device_find_child(port->dev, &match, serial_match_port); + if (!port->suspended && device_may_wakeup(tty_dev)) { disable_irq_wake(port->irq); mutex_unlock(&state->mutex); return 0; -- cgit v0.10.2 From 7eb54824b76793dd86afb54f182ef9aa64b3a45a Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Fri, 23 May 2008 13:04:50 -0700 Subject: zonelists: handle a node zonelist with no applicable entries When booting 2.6.26-rc3 on a multi-node x86_32 numa system we are seeing panics when trying node local allocations: BUG: unable to handle kernel NULL pointer dereference at 0000034c IP: [] get_page_from_freelist+0x4a/0x18e *pdpt = 00000000013a7001 *pde = 0000000000000000 Oops: 0000 [#1] SMP Modules linked in: Pid: 0, comm: swapper Not tainted (2.6.26-rc3-00003-g5abc28d #82) EIP: 0060:[] EFLAGS: 00010282 CPU: 0 EIP is at get_page_from_freelist+0x4a/0x18e EAX: c1371ed8 EBX: 00000000 ECX: 00000000 EDX: 00000000 ESI: f7801180 EDI: 00000000 EBP: 00000000 ESP: c1371ec0 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068 Process swapper (pid: 0, ti=c1370000 task=c12f5b40 task.ti=c1370000) Stack: 00000000 00000000 00000000 00000000 000612d0 000412d0 00000000 000412d0 f7801180 f7c0101c f7c01018 c10426e4 f7c01018 00000001 00000044 00000000 00000001 c12f5b40 00000001 00000010 00000000 000412d0 00000286 000412d0 Call Trace: [] __alloc_pages_internal+0x99/0x378 [] __alloc_pages+0x7/0x9 [] kmem_getpages+0x66/0xef [] cache_grow+0x8f/0x123 [] ____cache_alloc_node+0xb9/0xe4 [] kmem_cache_alloc_node+0x92/0xd2 [] setup_cpu_cache+0xaf/0x177 [] kmem_cache_create+0x2c8/0x353 [] kmem_cache_init+0x1ce/0x3ad [] start_kernel+0x178/0x1ee This occurs when we are scanning the zonelists looking for a ZONE_NORMAL page. In this system there is only ZONE_DMA and ZONE_NORMAL memory on node 0, all other nodes are mapped above 4GB physical. Here is a dump of the zonelists from this system: zonelists pgdat=c1400000 0: c14006c0:2 f7c006c0:2 f7e006c0:2 c1400360:1 c1400000:0 1: c14006c0:2 c1400360:1 c1400000:0 zonelists pgdat=f7c00000 0: f7c006c0:2 f7e006c0:2 c14006c0:2 c1400360:1 c1400000:0 1: f7c006c0:2 zonelists pgdat=f7e00000 0: f7e006c0:2 c14006c0:2 f7c006c0:2 c1400360:1 c1400000:0 1: f7e006c0:2 When performing a node local allocation we call get_page_from_freelist() looking for a page. It in turn calls first_zones_zonelist() which returns a preferred_zone. Where there are no applicable zones this will be NULL. However we use this unconditionally, leading to this panic. Where there are no applicable zones there is no possibility of a successful allocation, so simply fail the allocation. Signed-off-by: Andy Whitcroft Acked-by: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 0353002..7f4c66f 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1396,6 +1396,9 @@ get_page_from_freelist(gfp_t gfp_mask, nodemask_t *nodemask, unsigned int order, (void)first_zones_zonelist(zonelist, high_zoneidx, nodemask, &preferred_zone); + if (!preferred_zone) + return NULL; + classzone_idx = zone_idx(preferred_zone); zonelist_scan: -- cgit v0.10.2 From cd94b9dbfa300fc42e45f230010623fc08d59563 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 23 May 2008 13:04:52 -0700 Subject: memory hotplug: fix early allocation handling Trying to add memory via add_memory() from within an initcall function results in bootmem alloc of 163840 bytes failed! Kernel panic - not syncing: Out of memory This is caused by zone_wait_table_init() which uses system_state to decide if it should use the bootmem allocator or not. When initcalls are handled the system_state is still SYSTEM_BOOTING but the bootmem allocator doesn't work anymore. So the allocation will fail. To fix this use slab_is_available() instead as indicator like we do it everywhere else. [akpm@linux-foundation.org: coding-style fix] Reviewed-by: Andy Whitcroft Cc: Dave Hansen Cc: Gerald Schaefer Cc: KAMEZAWA Hiroyuki Acked-by: Yasunori Goto Signed-off-by: Heiko Carstens Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 7f4c66f..8e83f02 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2807,7 +2807,7 @@ int zone_wait_table_init(struct zone *zone, unsigned long zone_size_pages) alloc_size = zone->wait_table_hash_nr_entries * sizeof(wait_queue_head_t); - if (system_state == SYSTEM_BOOTING) { + if (!slab_is_available()) { zone->wait_table = (wait_queue_head_t *) alloc_bootmem_node(pgdat, alloc_size); } else { -- cgit v0.10.2 From cdc83ae2453ddb19060e05e6afd22b1254128c42 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:53 -0700 Subject: SM501: reverse FPEN/VBIASEN flags behaviour To keep backwards compatibility, reverse the meanings of these flags so that when they are not set, the driver uses the original behvaiour. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/sm501fb.c b/drivers/video/sm501fb.c index 742b5c6..15d4a76 100644 --- a/drivers/video/sm501fb.c +++ b/drivers/video/sm501fb.c @@ -663,14 +663,14 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) sm501fb_sync_regs(fbi); mdelay(10); - if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) { control |= SM501_DC_PANEL_CONTROL_BIAS; /* VBIASEN */ writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); } - if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) { control |= SM501_DC_PANEL_CONTROL_FPEN; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); @@ -678,14 +678,14 @@ static void sm501fb_panel_power(struct sm501fb_info *fbi, int to) } } else if (!to && (control & SM501_DC_PANEL_CONTROL_VDD) != 0) { /* disable panel power */ - if (pd->flags & SM501FB_FLAG_PANEL_USE_FPEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_FPEN)) { control &= ~SM501_DC_PANEL_CONTROL_FPEN; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); mdelay(10); } - if (pd->flags & SM501FB_FLAG_PANEL_USE_VBIASEN) { + if (!(pd->flags & SM501FB_FLAG_PANEL_NO_VBIASEN)) { control &= ~SM501_DC_PANEL_CONTROL_BIAS; writel(control, ctrl_reg); sm501fb_sync_regs(fbi); diff --git a/include/linux/sm501.h b/include/linux/sm501.h index bca1345..95c1c39 100644 --- a/include/linux/sm501.h +++ b/include/linux/sm501.h @@ -71,8 +71,8 @@ extern unsigned long sm501_gpio_get(struct device *dev, #define SM501FB_FLAG_DISABLE_AT_EXIT (1<<1) #define SM501FB_FLAG_USE_HWCURSOR (1<<2) #define SM501FB_FLAG_USE_HWACCEL (1<<3) -#define SM501FB_FLAG_PANEL_USE_FPEN (1<<4) -#define SM501FB_FLAG_PANEL_USE_VBIASEN (1<<5) +#define SM501FB_FLAG_PANEL_NO_FPEN (1<<4) +#define SM501FB_FLAG_PANEL_NO_VBIASEN (1<<5) struct sm501_platdata_fbsub { struct fb_videomode *def_mode; -- cgit v0.10.2 From 673b4600e3b3cc6689025e6a6fc6909b6e53dd5e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:55 -0700 Subject: S3C2410: ensure that FB_BLANK_POWERDOWN shuts down the controller When a blank level of FB_BLANK_POWERDOWN is used, we should shut down the controller so that it no longer tries to produce any panel signals or data, and shuts down the DMA which is not needed. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 13b38cb..2219ae5 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -580,6 +580,27 @@ static int s3c2410fb_setcolreg(unsigned regno, return 0; } +/* s3c2410fb_lcd_enable + * + * shutdown the lcd controller + */ +static void s3c2410fb_lcd_enable(struct s3c2410fb_info *fbi, int enable) +{ + unsigned long flags; + + local_irq_save(flags); + + if (enable) + fbi->regs.lcdcon1 |= S3C2410_LCDCON1_ENVID; + else + fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID; + + writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1); + + local_irq_restore(flags); +} + + /* * s3c2410fb_blank * @blank_mode: the blank mode we want. @@ -589,9 +610,6 @@ static int s3c2410fb_setcolreg(unsigned regno, * blanking succeeded, != 0 if un-/blanking failed due to e.g. a * video mode which doesn't support it. Implements VESA suspend * and powerdown modes on hardware that supports disabling hsync/vsync: - * blank_mode == 2: suspend vsync - * blank_mode == 3: suspend hsync - * blank_mode == 4: powerdown * * Returns negative errno on error, or zero on success. * @@ -605,6 +623,12 @@ static int s3c2410fb_blank(int blank_mode, struct fb_info *info) tpal_reg += is_s3c2412(fbi) ? S3C2412_TPAL : S3C2410_TPAL; + if (blank_mode == FB_BLANK_POWERDOWN) { + s3c2410fb_lcd_enable(fbi, 0); + } else { + s3c2410fb_lcd_enable(fbi, 1); + } + if (blank_mode == FB_BLANK_UNBLANK) writel(0x0, tpal_reg); else { @@ -983,21 +1007,6 @@ static int __init s3c2412fb_probe(struct platform_device *pdev) return s3c24xxfb_probe(pdev, DRV_S3C2412); } -/* s3c2410fb_stop_lcd - * - * shutdown the lcd controller - */ -static void s3c2410fb_stop_lcd(struct s3c2410fb_info *fbi) -{ - unsigned long flags; - - local_irq_save(flags); - - fbi->regs.lcdcon1 &= ~S3C2410_LCDCON1_ENVID; - writel(fbi->regs.lcdcon1, fbi->io + S3C2410_LCDCON1); - - local_irq_restore(flags); -} /* * Cleanup @@ -1010,7 +1019,7 @@ static int s3c2410fb_remove(struct platform_device *pdev) unregister_framebuffer(fbinfo); - s3c2410fb_stop_lcd(info); + s3c2410fb_lcd_enable(info, 0); msleep(1); s3c2410fb_unmap_video_memory(fbinfo); @@ -1043,7 +1052,7 @@ static int s3c2410fb_suspend(struct platform_device *dev, pm_message_t state) struct fb_info *fbinfo = platform_get_drvdata(dev); struct s3c2410fb_info *info = fbinfo->par; - s3c2410fb_stop_lcd(info); + s3c2410fb_lcd_enable(info, 0); /* sleep before disabling the clock, we need to ensure * the LCD DMA engine is not going to get back on the bus -- cgit v0.10.2 From d585dfe840c93ea800afc124333b6ac04722d359 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:56 -0700 Subject: S3C2410: add error print if we cannot add attribute Fix the following warning by checking the result of device_create_file and printing an error but not removing the device (loss of debug registers is not fatal). drivers/video/s3c2410fb.c:905: warning: ignoring return value of 'device_create_file', declared with attribute warn_unused_result Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 2219ae5..5fea847 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -972,7 +972,10 @@ static int __init s3c24xxfb_probe(struct platform_device *pdev, } /* create device files */ - device_create_file(&pdev->dev, &dev_attr_debug); + ret = device_create_file(&pdev->dev, &dev_attr_debug); + if (ret) { + printk(KERN_ERR "failed to add debug attribute\n"); + } printk(KERN_INFO "fb%d: %s frame buffer device\n", fbinfo->node, fbinfo->fix.id); -- cgit v0.10.2 From 6a0e4ec7bcc6e80d2a32a4c0b83a32c904aadc05 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:56 -0700 Subject: S3C2410: clean out changelog header and tidy Remove the old changelog entries which are now out of date and should be extractable from git anyway. Also tidy up the copyright for the driver. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 5fea847..24d5ea5 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -1,75 +1,15 @@ -/* - * linux/drivers/video/s3c2410fb.c - * Copyright (c) Arnaud Patard, Ben Dooks +/* linux/drivers/video/s3c2410fb.c + * Copyright (c) 2004,2005 Arnaud Patard + * Copyright (c) 2004-2008 Ben Dooks + * + * S3C2410 LCD Framebuffer Driver * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * - * S3C2410 LCD Controller Frame Buffer Driver - * based on skeletonfb.c, sa1100fb.c and others - * - * ChangeLog - * 2005-04-07: Arnaud Patard - * - u32 state -> pm_message_t state - * - S3C2410_{VA,SZ}_LCD -> S3C24XX - * - * 2005-03-15: Arnaud Patard - * - Removed the ioctl - * - use readl/writel instead of __raw_writel/__raw_readl - * - * 2004-12-04: Arnaud Patard - * - Added the possibility to set on or off the - * debugging messages - * - Replaced 0 and 1 by on or off when reading the - * /sys files - * - * 2005-03-23: Ben Dooks - * - added non 16bpp modes - * - updated platform information for range of x/y/bpp - * - add code to ensure palette is written correctly - * - add pixel clock divisor control - * - * 2004-11-11: Arnaud Patard - * - Removed the use of currcon as it no more exists - * - Added LCD power sysfs interface - * - * 2004-11-03: Ben Dooks - * - minor cleanups - * - add suspend/resume support - * - s3c2410fb_setcolreg() not valid in >8bpp modes - * - removed last CONFIG_FB_S3C2410_FIXED - * - ensure lcd controller stopped before cleanup - * - added sysfs interface for backlight power - * - added mask for gpio configuration - * - ensured IRQs disabled during GPIO configuration - * - disable TPAL before enabling video - * - * 2004-09-20: Arnaud Patard - * - Suppress command line options - * - * 2004-09-15: Arnaud Patard - * - code cleanup - * - * 2004-09-07: Arnaud Patard - * - Renamed from h1940fb.c to s3c2410fb.c - * - Add support for different devices - * - Backlight support - * - * 2004-09-05: Herbert Pötzl - * - added clock (de-)allocation code - * - added fixem fbmem option - * - * 2004-07-27: Arnaud Patard - * - code cleanup - * - added a forgotten return in h1940fb_init - * - * 2004-07-19: Herbert Pötzl - * - code cleanup and extended debugging - * - * 2004-07-15: Arnaud Patard - * - First version - */ + * Driver based on skeletonfb.c, sa1100fb.c and others. +*/ #include #include diff --git a/drivers/video/s3c2410fb.h b/drivers/video/s3c2410fb.h index dbb73b9..9a6ba3e 100644 --- a/drivers/video/s3c2410fb.h +++ b/drivers/video/s3c2410fb.h @@ -1,26 +1,14 @@ /* * linux/drivers/video/s3c2410fb.h - * Copyright (c) Arnaud Patard + * Copyright (c) 2004 Arnaud Patard + * + * S3C2410 LCD Framebuffer Driver * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for * more details. * - * S3C2410 LCD Controller Frame Buffer Driver - * based on skeletonfb.c, sa1100fb.h - * - * ChangeLog - * - * 2004-12-04: Arnaud Patard - * - Moved dprintk to s3c2410fb.c - * - * 2004-09-07: Arnaud Patard - * - Renamed from h1940fb.h to s3c2410fb.h - * - Changed h1940 to s3c2410 - * - * 2004-07-15: Arnaud Patard - * - First version - */ +*/ #ifndef __S3C2410FB_H #define __S3C2410FB_H -- cgit v0.10.2 From ee29420aca6ca6fbb3e72ee8a980b2600911b864 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 23 May 2008 13:04:57 -0700 Subject: S3C2410: fix driver MODULE_ALIAS() Add a correct MODULE_ALIAS() entry for this driver to enable udev module loading. Signed-off-by: Ben Dooks Cc: Arnaud Patard Acked-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/s3c2410fb.c b/drivers/video/s3c2410fb.c index 24d5ea5..f059896 100644 --- a/drivers/video/s3c2410fb.c +++ b/drivers/video/s3c2410fb.c @@ -1070,3 +1070,5 @@ MODULE_AUTHOR("Arnaud Patard , " "Ben Dooks "); MODULE_DESCRIPTION("Framebuffer driver for the s3c2410"); MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:s3c2410-lcd"); +MODULE_ALIAS("platform:s3c2412-lcd"); -- cgit v0.10.2 From 6ea0205b56546cef782b74d9f4664ec00290a6ae Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 23 May 2008 13:04:58 -0700 Subject: gpio: build fixes MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This fixes various gpio-related build errors (mostly potential) reported in part by Russell King and Uwe Kleine-König. Signed-off-by: David Brownell Cc: Uwe Kleine-König Cc: Russell King Cc: Arnaud Patard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index ecf675a..6be061d 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -1,8 +1,12 @@ #ifndef _ASM_GENERIC_GPIO_H #define _ASM_GENERIC_GPIO_H +#include + #ifdef CONFIG_HAVE_GPIO_LIB +#include + /* Platforms may implement their GPIO interface with library code, * at a small performance cost for non-inlined operations and some * extra memory (for code and for per-GPIO table entries). @@ -74,7 +78,7 @@ struct gpio_chip { extern const char *gpiochip_is_requested(struct gpio_chip *chip, unsigned offset); -extern int __init __must_check gpiochip_reserve(int start, int ngpio); +extern int __must_check gpiochip_reserve(int start, int ngpio); /* add/remove chips */ extern int gpiochip_add(struct gpio_chip *chip); diff --git a/include/linux/gpio.h b/include/linux/gpio.h index 4987a84..98be6c5 100644 --- a/include/linux/gpio.h +++ b/include/linux/gpio.h @@ -8,6 +8,9 @@ #else +#include +#include + /* * Some platforms don't support the GPIO programming interface. * -- cgit v0.10.2 From f99c90094bffbe1cf38ef66f198a808c14a02d56 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 23 May 2008 13:04:58 -0700 Subject: edac: mpc85xx: fix building as a module including of causes build problems since it doesn't exist. Also removed warning: drivers/edac/mpc85xx_edac.c:45: warning: 'mpc85xx_ctl_name' defined but not used Signed-off-by: Kumar Gala Acked-by: Doug Thompson Acked-by: Dave Jiang Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/edac/mpc85xx_edac.c b/drivers/edac/mpc85xx_edac.c index 065732d..d49361bf 100644 --- a/drivers/edac/mpc85xx_edac.c +++ b/drivers/edac/mpc85xx_edac.c @@ -20,7 +20,6 @@ #include #include -#include #include "edac_module.h" #include "edac_core.h" #include "mpc85xx_edac.h" @@ -43,8 +42,6 @@ static u32 orig_pci_err_en; static u32 orig_l2_err_disable; static u32 orig_hid1; -static const char *mpc85xx_ctl_name = "MPC85xx"; - /************************ MC SYSFS parts ***********************************/ static ssize_t mpc85xx_mc_inject_data_hi_show(struct mem_ctl_info *mci, -- cgit v0.10.2 From 7b26655f6208fdefa9ab0adc016116324f8d4ba8 Mon Sep 17 00:00:00 2001 From: Shi Weihua Date: Fri, 23 May 2008 13:04:59 -0700 Subject: sys_prctl(): fix return of uninitialized value If none of the switch cases match, the PR_SET_PDEATHSIG and PR_SET_DUMPABLE cases of the switch statement will never write to local variable `error'. Signed-off-by: Shi Weihua Cc: Andrew G. Morgan Acked-by: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/sys.c b/kernel/sys.c index 895d2d4..14e9728 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -1652,7 +1652,7 @@ asmlinkage long sys_umask(int mask) asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5) { - long uninitialized_var(error); + long error = 0; if (security_task_prctl(option, arg2, arg3, arg4, arg5, &error)) return error; @@ -1701,9 +1701,7 @@ asmlinkage long sys_prctl(int option, unsigned long arg2, unsigned long arg3, error = PR_TIMING_STATISTICAL; break; case PR_SET_TIMING: - if (arg2 == PR_TIMING_STATISTICAL) - error = 0; - else + if (arg2 != PR_TIMING_STATISTICAL) error = -EINVAL; break; -- cgit v0.10.2 From fb56f0f9922d3fb2c5503cdc346dc3f86c897bc4 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 23 May 2008 13:05:00 -0700 Subject: frv: export empty_zero_page Fix the following build error: ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/frv/mm/init.c b/arch/frv/mm/init.c index b841ecf..9af7740 100644 --- a/arch/frv/mm/init.c +++ b/arch/frv/mm/init.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include @@ -56,7 +57,9 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); */ static unsigned long empty_bad_page_table; static unsigned long empty_bad_page; + unsigned long empty_zero_page; +EXPORT_SYMBOL(empty_zero_page); /*****************************************************************************/ /* -- cgit v0.10.2 From 12d15f0d51d47cec39d1d7250e81573c5cbd8b5d Mon Sep 17 00:00:00 2001 From: Fernando Luis Vazquez Cao Date: Fri, 23 May 2008 13:05:01 -0700 Subject: for_each_online_pgdat(): kerneldoc fix for_each_pgdat() was renamed to for_each_online_pgdat() and kerneldoc comments should be updated accordingly. Signed-off-by: Fernando Luis Vazquez Cao Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h index c463cd8..443bc7c 100644 --- a/include/linux/mmzone.h +++ b/include/linux/mmzone.h @@ -703,7 +703,7 @@ extern struct pglist_data *next_online_pgdat(struct pglist_data *pgdat); extern struct zone *next_zone(struct zone *zone); /** - * for_each_pgdat - helper macro to iterate over all nodes + * for_each_online_pgdat - helper macro to iterate over all online nodes * @pgdat - pointer to a pg_data_t variable */ #define for_each_online_pgdat(pgdat) \ -- cgit v0.10.2 From 5c02b575780d0d785815a1e7b79a98edddee895a Mon Sep 17 00:00:00 2001 From: Cedric Le Goater Date: Fri, 23 May 2008 13:05:02 -0700 Subject: cgroups: remove node_ prefix_from ns subsystem This is a slight change in the namespace cgroup subsystem api. The change is that previously when cgroup_clone() was called (currently only from the unshare path in ns_proxy cgroup, you'd get a new group named "node_$pid" whereas now you'll get a group named after just your pid.) The only users who would notice it are those who are using the ns_proxy cgroup subsystem to auto-create cgroups when namespaces are unshared - something of an experimental feature, which I think really needs more complete container/namespace support in order to be useful. I suspect the only users are Cedric and Serge, or maybe a few others on containers@lists.linux-foundation.org. And in fact it would only be noticed by the users who make the assumption about how the name is generated, rather than getting it from the /proc//cgroups file for the process in question. Whether the change is actually needed or not I'm fairly agnostic on, but I guess it is more elegant to just use the pid as the new group name rather than adding a fairly arbitrary "node_" prefix on the front. [menage@google.com: provided changelog] Signed-off-by: Cedric Le Goater Cc: "Paul Menage" Cc: "Serge E. Hallyn" Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/cgroup.c b/kernel/cgroup.c index fbc6fc8..15ac0e1 100644 --- a/kernel/cgroup.c +++ b/kernel/cgroup.c @@ -2903,7 +2903,7 @@ int cgroup_clone(struct task_struct *tsk, struct cgroup_subsys *subsys) cg = tsk->cgroups; parent = task_cgroup(tsk, subsys->subsys_id); - snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "node_%d", tsk->pid); + snprintf(nodename, MAX_CGROUP_TYPE_NAMELEN, "%d", tsk->pid); /* Pin the hierarchy */ atomic_inc(&parent->root->sb->s_active); -- cgit v0.10.2 From 25d5cb4b0375e5864ec0ccf35e12ff1d1b5cf3f0 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 23 May 2008 13:05:03 -0700 Subject: spi: remove some spidev oops-on-rmmod paths Somehow the spidev code forgot to include a critical mechanism: when the underlying device is removed (e.g. spi_master rmmod), open file descriptors must be prevented from issuing new I/O requests to that device. On penalty of the oopsing reported by Sebastian Siewior ... This is a partial fix, adding handshaking between the lower level (SPI messaging) and the file operations using the spi_dev. (It also fixes an issue where reads and writes didn't return the number of bytes sent or received.) There's still a refcounting issue to be addressed (separately). Signed-off-by: David Brownell Reported-by: Sebastian Siewior Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index b3518ca..41620c0 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -68,6 +68,7 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; struct spidev_data { struct device dev; + spinlock_t spi_lock; struct spi_device *spi; struct list_head device_entry; @@ -85,12 +86,75 @@ MODULE_PARM_DESC(bufsiz, "data bytes in biggest supported SPI message"); /*-------------------------------------------------------------------------*/ +/* + * We can't use the standard synchronous wrappers for file I/O; we + * need to protect against async removal of the underlying spi_device. + */ +static void spidev_complete(void *arg) +{ + complete(arg); +} + +static ssize_t +spidev_sync(struct spidev_data *spidev, struct spi_message *message) +{ + DECLARE_COMPLETION_ONSTACK(done); + int status; + + message->complete = spidev_complete; + message->context = &done; + + spin_lock_irq(&spidev->spi_lock); + if (spidev->spi == NULL) + status = -ESHUTDOWN; + else + status = spi_async(spidev->spi, message); + spin_unlock_irq(&spidev->spi_lock); + + if (status == 0) { + wait_for_completion(&done); + status = message->status; + if (status == 0) + status = message->actual_length; + } + return status; +} + +static inline ssize_t +spidev_sync_write(struct spidev_data *spidev, size_t len) +{ + struct spi_transfer t = { + .tx_buf = spidev->buffer, + .len = len, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spidev_sync(spidev, &m); +} + +static inline ssize_t +spidev_sync_read(struct spidev_data *spidev, size_t len) +{ + struct spi_transfer t = { + .rx_buf = spidev->buffer, + .len = len, + }; + struct spi_message m; + + spi_message_init(&m); + spi_message_add_tail(&t, &m); + return spidev_sync(spidev, &m); +} + +/*-------------------------------------------------------------------------*/ + /* Read-only message with current device setup */ static ssize_t spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) { struct spidev_data *spidev; - struct spi_device *spi; ssize_t status = 0; /* chipselect only toggles at start or end of operation */ @@ -98,10 +162,9 @@ spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) return -EMSGSIZE; spidev = filp->private_data; - spi = spidev->spi; mutex_lock(&spidev->buf_lock); - status = spi_read(spi, spidev->buffer, count); + status = spidev_sync_read(spidev, count); if (status == 0) { unsigned long missing; @@ -122,7 +185,6 @@ spidev_write(struct file *filp, const char __user *buf, size_t count, loff_t *f_pos) { struct spidev_data *spidev; - struct spi_device *spi; ssize_t status = 0; unsigned long missing; @@ -131,12 +193,11 @@ spidev_write(struct file *filp, const char __user *buf, return -EMSGSIZE; spidev = filp->private_data; - spi = spidev->spi; mutex_lock(&spidev->buf_lock); missing = copy_from_user(spidev->buffer, buf, count); if (missing == 0) { - status = spi_write(spi, spidev->buffer, count); + status = spidev_sync_write(spidev, count); if (status == 0) status = count; } else @@ -153,7 +214,6 @@ static int spidev_message(struct spidev_data *spidev, struct spi_transfer *k_xfers; struct spi_transfer *k_tmp; struct spi_ioc_transfer *u_tmp; - struct spi_device *spi = spidev->spi; unsigned n, total; u8 *buf; int status = -EFAULT; @@ -215,7 +275,7 @@ static int spidev_message(struct spidev_data *spidev, spi_message_add_tail(k_tmp, &msg); } - status = spi_sync(spi, &msg); + status = spidev_sync(spidev, &msg); if (status < 0) goto done; @@ -269,8 +329,16 @@ spidev_ioctl(struct inode *inode, struct file *filp, if (err) return -EFAULT; + /* guard against device removal before, or while, + * we issue this ioctl. + */ spidev = filp->private_data; - spi = spidev->spi; + spin_lock_irq(&spidev->spi_lock); + spi = spi_dev_get(spidev->spi); + spin_unlock_irq(&spidev->spi_lock); + + if (spi == NULL) + return -ESHUTDOWN; switch (cmd) { /* read requests */ @@ -356,8 +424,10 @@ spidev_ioctl(struct inode *inode, struct file *filp, default: /* segmented and/or full-duplex I/O request */ if (_IOC_NR(cmd) != _IOC_NR(SPI_IOC_MESSAGE(0)) - || _IOC_DIR(cmd) != _IOC_WRITE) - return -ENOTTY; + || _IOC_DIR(cmd) != _IOC_WRITE) { + retval = -ENOTTY; + break; + } tmp = _IOC_SIZE(cmd); if ((tmp % sizeof(struct spi_ioc_transfer)) != 0) { @@ -385,6 +455,7 @@ spidev_ioctl(struct inode *inode, struct file *filp, kfree(ioc); break; } + spi_dev_put(spi); return retval; } @@ -488,6 +559,7 @@ static int spidev_probe(struct spi_device *spi) /* Initialize the driver data */ spidev->spi = spi; + spin_lock_init(&spidev->spi_lock); mutex_init(&spidev->buf_lock); INIT_LIST_HEAD(&spidev->device_entry); @@ -526,13 +598,17 @@ static int spidev_remove(struct spi_device *spi) { struct spidev_data *spidev = dev_get_drvdata(&spi->dev); - mutex_lock(&device_list_lock); + /* make sure ops on existing fds can abort cleanly */ + spin_lock_irq(&spidev->spi_lock); + spidev->spi = NULL; + spin_unlock_irq(&spidev->spi_lock); + /* prevent new opens */ + mutex_lock(&device_list_lock); list_del(&spidev->device_entry); dev_set_drvdata(&spi->dev, NULL); clear_bit(MINOR(spidev->dev.devt), minors); device_unregister(&spidev->dev); - mutex_unlock(&device_list_lock); return 0; -- cgit v0.10.2 From 5132861a7a44498ebb18357473f8b8d4cdc70e9f Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 22 May 2008 09:33:34 -0400 Subject: disable most mode changes on non-unix/non-cifsacl mounts CIFS currently allows you to change the mode of an inode on a share that doesn't have unix extensions enabled, and isn't using cifsacl. The inode in this case *only* has its mode changed in memory on the client. This is problematic since it can change any time the inode is purged from the cache. This patch makes cifs_setattr silently ignore most mode changes when unix extensions and cifsacl support are not enabled, and when the share is not mounted with the "dynperm" option. The exceptions are: When a mode change would remove all write access to an inode we turn on the ATTR_READONLY bit on the server and remove all write bits from the inode's mode in memory. When a mode change would add a write bit to an inode that previously had them all turned off, it turns off the ATTR_READONLY bit on the server, and resets the mode back to what it would normally be (generally, the file_mode or dir_mode of the share). Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index fe752fd..722be54 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -1575,7 +1575,7 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) attrs->ia_valid &= ~ATTR_MODE; if (attrs->ia_valid & ATTR_MODE) { - cFYI(1, ("Mode changed to 0x%x", attrs->ia_mode)); + cFYI(1, ("Mode changed to 0%o", attrs->ia_mode)); mode = attrs->ia_mode; } @@ -1590,18 +1590,18 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) #ifdef CONFIG_CIFS_EXPERIMENTAL if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_CIFS_ACL) rc = mode_to_acl(inode, full_path, mode); - else if ((mode & S_IWUGO) == 0) { -#else - if ((mode & S_IWUGO) == 0) { + else #endif - /* not writeable */ - if ((cifsInode->cifsAttrs & ATTR_READONLY) == 0) { - set_dosattr = true; - time_buf.Attributes = - cpu_to_le32(cifsInode->cifsAttrs | - ATTR_READONLY); - } - } else if (cifsInode->cifsAttrs & ATTR_READONLY) { + if (((mode & S_IWUGO) == 0) && + (cifsInode->cifsAttrs & ATTR_READONLY) == 0) { + set_dosattr = true; + time_buf.Attributes = cpu_to_le32(cifsInode->cifsAttrs | + ATTR_READONLY); + /* fix up mode if we're not using dynperm */ + if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM) == 0) + attrs->ia_mode = inode->i_mode & ~S_IWUGO; + } else if ((mode & S_IWUGO) && + (cifsInode->cifsAttrs & ATTR_READONLY)) { /* If file is readonly on server, we would not be able to write to it - so if any write bit is enabled for user or group or other we @@ -1612,6 +1612,20 @@ int cifs_setattr(struct dentry *direntry, struct iattr *attrs) /* Windows ignores set to zero */ if (time_buf.Attributes == 0) time_buf.Attributes |= cpu_to_le32(ATTR_NORMAL); + + /* reset local inode permissions to normal */ + if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) { + attrs->ia_mode &= ~(S_IALLUGO); + if (S_ISDIR(inode->i_mode)) + attrs->ia_mode |= + cifs_sb->mnt_dir_mode; + else + attrs->ia_mode |= + cifs_sb->mnt_file_mode; + } + } else if (!(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_DYNPERM)) { + /* ignore mode change - ATTR_READONLY hasn't changed */ + attrs->ia_valid &= ~ATTR_MODE; } } -- cgit v0.10.2 From 03315adca76ee93128e4d92566d1f18a1a937e79 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Wed, 12 Mar 2008 14:28:01 +0100 Subject: [WATCHDOG] Make w83697h_wdt void-like functions void Some non-exported functions always returned 0. Mark them void instead. Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index c622a0e..b534174 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -140,7 +140,7 @@ w83697hf_init(void) w83697hf_deselect_wdt(); } -static int +static void wdt_ping(void) { spin_lock(&io_lock); @@ -150,10 +150,9 @@ wdt_ping(void) w83697hf_deselect_wdt(); spin_unlock(&io_lock); - return 0; } -static int +static void wdt_enable(void) { spin_lock(&io_lock); @@ -164,10 +163,9 @@ wdt_enable(void) w83697hf_deselect_wdt(); spin_unlock(&io_lock); - return 0; } -static int +static void wdt_disable(void) { spin_lock(&io_lock); @@ -178,7 +176,6 @@ wdt_disable(void) w83697hf_deselect_wdt(); spin_unlock(&io_lock); - return 0; } static int -- cgit v0.10.2 From 5794a9f412676ee7ec87828a926d0f58f0a2ffbf Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Wed, 12 Mar 2008 14:28:02 +0100 Subject: [WATCHDOG] Make w83697h_wdt timeout option string similar to others Signed-off-by: Samuel Tardieu Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index b534174..2120702 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -56,7 +56,7 @@ MODULE_PARM_DESC(wdt_io, "w83697hf/hg WDT io port (default 0x2e, 0 = autodetect) static int timeout = WATCHDOG_TIMEOUT; /* in seconds */ module_param(timeout, int, 0); -MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=255 (default=" __MODULE_STRING(WATCHDOG_TIMEOUT) ")"); static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); -- cgit v0.10.2 From 6fd656012bb8d5c5a4570adc2e630668b0109cb0 Mon Sep 17 00:00:00 2001 From: Samuel Tardieu Date: Wed, 12 Mar 2008 14:28:03 +0100 Subject: [WATCHDOG] Add w83697h_wdt early_disable option MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit PĂ¡draig Brady requested the possibility of not disabling the watchdog at module load time or kernel boot time if it had been previously enabled in the bios. It may help rebooting the machine if it freezes before the userland daemon kicks in. Signed-off-by: Samuel Tardieu Cc: PĂ¡draig Brady Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/w83697hf_wdt.c b/drivers/watchdog/w83697hf_wdt.c index 2120702..528b882 100644 --- a/drivers/watchdog/w83697hf_wdt.c +++ b/drivers/watchdog/w83697hf_wdt.c @@ -44,6 +44,7 @@ #define WATCHDOG_NAME "w83697hf/hg WDT" #define PFX WATCHDOG_NAME ": " #define WATCHDOG_TIMEOUT 60 /* 60 sec default timeout */ +#define WATCHDOG_EARLY_DISABLE 1 /* Disable until userland kicks in */ static unsigned long wdt_is_open; static char expect_close; @@ -62,6 +63,10 @@ static int nowayout = WATCHDOG_NOWAYOUT; module_param(nowayout, int, 0); MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); +static int early_disable = WATCHDOG_EARLY_DISABLE; +module_param(early_disable, int, 0); +MODULE_PARM_DESC(early_disable, "Watchdog gets disabled at boot time (default=" __MODULE_STRING(WATCHDOG_EARLY_DISABLE) ")"); + /* * Kernel methods. */ @@ -178,6 +183,22 @@ wdt_disable(void) spin_unlock(&io_lock); } +static unsigned char +wdt_running(void) +{ + unsigned char t; + + spin_lock(&io_lock); + w83697hf_select_wdt(); + + t = w83697hf_get_reg(0xF4); /* Read timer */ + + w83697hf_deselect_wdt(); + spin_unlock(&io_lock); + + return t; +} + static int wdt_set_heartbeat(int t) { @@ -394,7 +415,11 @@ wdt_init(void) } w83697hf_init(); - wdt_disable(); /* Disable watchdog until first use */ + if (early_disable) { + if (wdt_running()) + printk (KERN_WARNING PFX "Stopping previously enabled watchdog until userland kicks in\n"); + wdt_disable(); + } if (wdt_set_heartbeat(timeout)) { wdt_set_heartbeat(WATCHDOG_TIMEOUT); -- cgit v0.10.2 From 93539b194696a6291e6895be07d4241c8d972c4b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Thu, 27 Mar 2008 11:53:32 -0700 Subject: [WATCHDOG] Blackfin Watchdog Driver: split platform device/driver - split platform device/driver registering from actual watchdog device/driver registering so that we can cleanly load/unload - fixup __initdata with __initconst and __devinitdata with __devinitconst Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/bfin_wdt.c b/drivers/watchdog/bfin_wdt.c index 1237113..03b3e3d 100644 --- a/drivers/watchdog/bfin_wdt.c +++ b/drivers/watchdog/bfin_wdt.c @@ -29,7 +29,8 @@ #define stamp(fmt, args...) pr_debug("%s:%i: " fmt "\n", __func__, __LINE__, ## args) #define stampit() stamp("here i am") -#define pr_init(fmt, args...) ({ static const __initdata char __fmt[] = fmt; printk(__fmt, ## args); }) +#define pr_devinit(fmt, args...) ({ static const __devinitconst char __fmt[] = fmt; printk(__fmt, ## args); }) +#define pr_init(fmt, args...) ({ static const __initconst char __fmt[] = fmt; printk(__fmt, ## args); }) #define WATCHDOG_NAME "bfin-wdt" #define PFX WATCHDOG_NAME ": " @@ -377,20 +378,6 @@ static int bfin_wdt_resume(struct platform_device *pdev) # define bfin_wdt_resume NULL #endif -static struct platform_device bfin_wdt_device = { - .name = WATCHDOG_NAME, - .id = -1, -}; - -static struct platform_driver bfin_wdt_driver = { - .driver = { - .name = WATCHDOG_NAME, - .owner = THIS_MODULE, - }, - .suspend = bfin_wdt_suspend, - .resume = bfin_wdt_resume, -}; - static const struct file_operations bfin_wdt_fops = { .owner = THIS_MODULE, .llseek = no_llseek, @@ -418,11 +405,67 @@ static struct notifier_block bfin_wdt_notifier = { }; /** - * bfin_wdt_init - Initialize module + * bfin_wdt_probe - Initialize module * - * Registers the device and notifier handler. Actual device + * Registers the misc device and notifier handler. Actual device * initialization is handled by bfin_wdt_open(). */ +static int __devinit bfin_wdt_probe(struct platform_device *pdev) +{ + int ret; + + ret = register_reboot_notifier(&bfin_wdt_notifier); + if (ret) { + pr_devinit(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); + return ret; + } + + ret = misc_register(&bfin_wdt_miscdev); + if (ret) { + pr_devinit(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", + WATCHDOG_MINOR, ret); + unregister_reboot_notifier(&bfin_wdt_notifier); + return ret; + } + + pr_devinit(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n", + timeout, nowayout); + + return 0; +} + +/** + * bfin_wdt_remove - Initialize module + * + * Unregisters the misc device and notifier handler. Actual device + * deinitialization is handled by bfin_wdt_close(). + */ +static int __devexit bfin_wdt_remove(struct platform_device *pdev) +{ + misc_deregister(&bfin_wdt_miscdev); + unregister_reboot_notifier(&bfin_wdt_notifier); + return 0; +} + +static struct platform_device *bfin_wdt_device; + +static struct platform_driver bfin_wdt_driver = { + .probe = bfin_wdt_probe, + .remove = __devexit_p(bfin_wdt_remove), + .suspend = bfin_wdt_suspend, + .resume = bfin_wdt_resume, + .driver = { + .name = WATCHDOG_NAME, + .owner = THIS_MODULE, + }, +}; + +/** + * bfin_wdt_init - Initialize module + * + * Checks the module params and registers the platform device & driver. + * Real work is in the platform probe function. + */ static int __init bfin_wdt_init(void) { int ret; @@ -436,44 +479,32 @@ static int __init bfin_wdt_init(void) /* Since this is an on-chip device and needs no board-specific * resources, we'll handle all the platform device stuff here. */ - ret = platform_device_register(&bfin_wdt_device); - if (ret) - return ret; - - ret = platform_driver_probe(&bfin_wdt_driver, NULL); - if (ret) - return ret; - - ret = register_reboot_notifier(&bfin_wdt_notifier); + ret = platform_driver_register(&bfin_wdt_driver); if (ret) { - pr_init(KERN_ERR PFX "cannot register reboot notifier (err=%d)\n", ret); + pr_init(KERN_ERR PFX "unable to register driver\n"); return ret; } - ret = misc_register(&bfin_wdt_miscdev); - if (ret) { - pr_init(KERN_ERR PFX "cannot register miscdev on minor=%d (err=%d)\n", - WATCHDOG_MINOR, ret); - unregister_reboot_notifier(&bfin_wdt_notifier); - return ret; + bfin_wdt_device = platform_device_register_simple(WATCHDOG_NAME, -1, NULL, 0); + if (IS_ERR(bfin_wdt_device)) { + pr_init(KERN_ERR PFX "unable to register device\n"); + platform_driver_unregister(&bfin_wdt_driver); + return PTR_ERR(bfin_wdt_device); } - pr_init(KERN_INFO PFX "initialized: timeout=%d sec (nowayout=%d)\n", - timeout, nowayout); - return 0; } /** * bfin_wdt_exit - Deinitialize module * - * Unregisters the device and notifier handler. Actual device - * deinitialization is handled by bfin_wdt_close(). + * Back out the platform device & driver steps. Real work is in the + * platform remove function. */ static void __exit bfin_wdt_exit(void) { - misc_deregister(&bfin_wdt_miscdev); - unregister_reboot_notifier(&bfin_wdt_notifier); + platform_device_unregister(bfin_wdt_device); + platform_driver_unregister(&bfin_wdt_driver); } module_init(bfin_wdt_init); -- cgit v0.10.2 From 7f7f894c6d3285407b2493d1575500fb25e3d495 Mon Sep 17 00:00:00 2001 From: "Mingarelli, Thomas" Date: Tue, 25 Mar 2008 17:17:30 +0000 Subject: [WATCHDOG] hpwdt: Fix NMI handling. I need to just return in case it's not my NMI so someone else can take a look at it (and reset die_nmi_called to 0 in case I actually do get one that's mine to handle). Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6483d10..6a63535 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -418,23 +418,20 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, static unsigned long rom_pl; static int die_nmi_called; - if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) - return NOTIFY_OK; - - spin_lock_irqsave(&rom_lock, rom_pl); - if (!die_nmi_called) - asminline_call(&cmn_regs, cru_rom_addr); - die_nmi_called = 1; - spin_unlock_irqrestore(&rom_lock, rom_pl); - if (cmn_regs.u1.ral == 0) { - printk(KERN_WARNING "hpwdt: An NMI occurred, " - "but unable to determine source.\n"); - } else { - panic("An NMI occurred, please see the Integrated " - "Management Log for details.\n"); + if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) { + spin_lock_irqsave(&rom_lock, rom_pl); + if (!die_nmi_called) + asminline_call(&cmn_regs, cru_rom_addr); + die_nmi_called = 1; + spin_unlock_irqrestore(&rom_lock, rom_pl); + if (cmn_regs.u1.ral != 0) { + panic("An NMI occurred, please see the Integrated " + "Management Log for details.\n"); + } } - return NOTIFY_STOP; + die_nmi_called = 0; + return NOTIFY_DONE; } /* -- cgit v0.10.2 From 0b36086b5d7c397a128784bed6e332418e500af1 Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Mon, 21 Jan 2008 10:07:00 -0700 Subject: [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers Add a watchdog timer based on the MFGPT timers in the CS5535/CS5536 companion chips to the AMD Geode GX and LX processors. Only caveat is that the BIOS must provide at least a one free timer, and most do not. Signed-off-by: Jordan Crouse Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 254d115..ccb78f6 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -295,6 +295,19 @@ config ALIM7101_WDT Most people will say N. +config GEODE_WDT + tristate "AMD Geode CS5535/CS5536 Watchdog" + depends on MGEODE_LX + help + This driver enables a watchdog capability built into the + CS5535/CS5536 companion chips for the AMD Geode GX and LX + processors. This watchdog watches your kernel to make sure + it doesn't freeze, and if it does, it reboots your computer after + a certain amount of time. + + You can compile this driver directly into the kernel, or use + it as a module. The module will be called geodewdt. + config SC520_WDT tristate "AMD Elan SC520 processor Watchdog" depends on X86 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index f3fb170..25b352b 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_ACQUIRE_WDT) += acquirewdt.o obj-$(CONFIG_ADVANTECH_WDT) += advantechwdt.o obj-$(CONFIG_ALIM1535_WDT) += alim1535_wdt.o obj-$(CONFIG_ALIM7101_WDT) += alim7101_wdt.o +obj-$(CONFIG_GEODE_WDT) += geodewdt.o obj-$(CONFIG_SC520_WDT) += sc520_wdt.o obj-$(CONFIG_EUROTECH_WDT) += eurotechwdt.o obj-$(CONFIG_IB700_WDT) += ib700wdt.o diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c new file mode 100644 index 0000000..f85b196 --- /dev/null +++ b/drivers/watchdog/geodewdt.c @@ -0,0 +1,309 @@ +/* Watchdog timer for the Geode GX/LX with the CS5535/CS5536 companion chip + * + * Copyright (C) 2006-2007, Advanced Micro Devices, Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +#define GEODEWDT_HZ 500 +#define GEODEWDT_SCALE 6 +#define GEODEWDT_MAX_SECONDS 131 + +#define WDT_FLAGS_OPEN 1 +#define WDT_FLAGS_ORPHAN 2 + +#define DRV_NAME "geodewdt" +#define WATCHDOG_NAME "Geode GX/LX WDT" +#define WATCHDOG_TIMEOUT 60 + +static int timeout = WATCHDOG_TIMEOUT; +module_param(timeout, int, 0); +MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds. 1<= timeout <=131, default=" __MODULE_STRING(WATCHDOG_TIMEOUT) "."); + +static int nowayout = WATCHDOG_NOWAYOUT; +module_param(nowayout, int, 0); +MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); + +static struct platform_device *geodewdt_platform_device; +static unsigned long wdt_flags; +static int wdt_timer; +static int safe_close; + +static void geodewdt_ping(void) +{ + /* Stop the counter */ + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + + /* Reset the counter */ + geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + + /* Enable the counter */ + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); +} + +static void geodewdt_disable(void) +{ + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); +} + +static int geodewdt_set_heartbeat(int val) +{ + if (val < 1 || val > GEODEWDT_MAX_SECONDS) + return -EINVAL; + + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, 0); + geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, val * GEODEWDT_HZ); + geode_mfgpt_write(wdt_timer, MFGPT_REG_COUNTER, 0); + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, MFGPT_SETUP_CNTEN); + + timeout = val; + return 0; +} + +static int +geodewdt_open(struct inode *inode, struct file *file) +{ + if (test_and_set_bit(WDT_FLAGS_OPEN, &wdt_flags)) + return -EBUSY; + + if (!test_and_clear_bit(WDT_FLAGS_ORPHAN, &wdt_flags)) + __module_get(THIS_MODULE); + + geodewdt_ping(); + return nonseekable_open(inode, file); +} + +static int +geodewdt_release(struct inode *inode, struct file *file) +{ + if (safe_close) { + geodewdt_disable(); + module_put(THIS_MODULE); + } + else { + printk(KERN_CRIT "Unexpected close - watchdog is not stopping.\n"); + geodewdt_ping(); + + set_bit(WDT_FLAGS_ORPHAN, &wdt_flags); + } + + clear_bit(WDT_FLAGS_OPEN, &wdt_flags); + safe_close = 0; + return 0; +} + +static ssize_t +geodewdt_write(struct file *file, const char __user *data, size_t len, + loff_t *ppos) +{ + if(len) { + if (!nowayout) { + size_t i; + safe_close = 0; + + for (i = 0; i != len; i++) { + char c; + + if (get_user(c, data + i)) + return -EFAULT; + + if (c == 'V') + safe_close = 1; + } + } + + geodewdt_ping(); + } + return len; +} + +static int +geodewdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, + unsigned long arg) +{ + void __user *argp = (void __user *)arg; + int __user *p = argp; + int interval; + + static struct watchdog_info ident = { + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING + | WDIOF_MAGICCLOSE, + .firmware_version = 1, + .identity = WATCHDOG_NAME, + }; + + switch(cmd) { + case WDIOC_GETSUPPORT: + return copy_to_user(argp, &ident, + sizeof(ident)) ? -EFAULT : 0; + break; + + case WDIOC_GETSTATUS: + case WDIOC_GETBOOTSTATUS: + return put_user(0, p); + + case WDIOC_KEEPALIVE: + geodewdt_ping(); + return 0; + + case WDIOC_SETTIMEOUT: + if (get_user(interval, p)) + return -EFAULT; + + if (geodewdt_set_heartbeat(interval)) + return -EINVAL; + +/* Fall through */ + + case WDIOC_GETTIMEOUT: + return put_user(timeout, p); + + case WDIOC_SETOPTIONS: + { + int options, ret = -EINVAL; + + if (get_user(options, p)) + return -EFAULT; + + if (options & WDIOS_DISABLECARD) { + geodewdt_disable(); + ret = 0; + } + + if (options & WDIOS_ENABLECARD) { + geodewdt_ping(); + ret = 0; + } + + return ret; + } + default: + return -ENOTTY; + } + + return 0; +} + +static const struct file_operations geodewdt_fops = { + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = geodewdt_write, + .ioctl = geodewdt_ioctl, + .open = geodewdt_open, + .release = geodewdt_release, +}; + +static struct miscdevice geodewdt_miscdev = { + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &geodewdt_fops +}; + +static int __devinit +geodewdt_probe(struct platform_device *dev) +{ + int ret, timer; + + timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, + MFGPT_DOMAIN_WORKING, THIS_MODULE); + + if (timer == -1) { + printk(KERN_ERR "geodewdt: No timers were available\n"); + return -ENODEV; + } + + wdt_timer = timer; + + /* Set up the timer */ + + geode_mfgpt_write(wdt_timer, MFGPT_REG_SETUP, + GEODEWDT_SCALE | (3 << 8)); + + /* Set up comparator 2 to reset when the event fires */ + geode_mfgpt_toggle_event(wdt_timer, MFGPT_CMP2, MFGPT_EVENT_RESET, 1); + + /* Set up the initial timeout */ + + geode_mfgpt_write(wdt_timer, MFGPT_REG_CMP2, + timeout * GEODEWDT_HZ); + + ret = misc_register(&geodewdt_miscdev); + + return ret; +} + +static int __devexit +geodewdt_remove(struct platform_device *dev) +{ + misc_deregister(&geodewdt_miscdev); + return 0; +} + +static void +geodewdt_shutdown(struct platform_device *dev) +{ + geodewdt_disable(); +} + +static struct platform_driver geodewdt_driver = { + .probe = geodewdt_probe, + .remove = __devexit_p(geodewdt_remove), + .shutdown = geodewdt_shutdown, + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init +geodewdt_init(void) +{ + int ret; + + ret = platform_driver_register(&geodewdt_driver); + if (ret) + return ret; + + geodewdt_platform_device = platform_device_register_simple(DRV_NAME, -1, NULL, 0); + if (IS_ERR(geodewdt_platform_device)) { + ret = PTR_ERR(geodewdt_platform_device); + goto err; + } + + return 0; +err: + platform_driver_unregister(&geodewdt_driver); + return ret; +} + +static void __exit +geodewdt_exit(void) +{ + platform_device_unregister(geodewdt_platform_device); + platform_driver_unregister(&geodewdt_driver); +} + +module_init(geodewdt_init); +module_exit(geodewdt_exit); + +MODULE_AUTHOR("Advanced Micro Devices, Inc"); +MODULE_DESCRIPTION("Geode GX/LX Watchdog Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -- cgit v0.10.2 From f172ddc61ad7a7c444b2b3e08992a45c76b821f9 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Tue, 29 Apr 2008 16:42:05 +0800 Subject: [WATCHDOG] Fix booke_wdt.c on MPC85xx SMP system's On Book-E SMP systems each core has its own private watchdog. If only one watchdog is enabled, when the core that doesn't enable the watchdog is hung, system can't reset because no watchdog is running on it. That's bad. It means we must enable watchdogs on both cores. We can use smp_call_function() to send appropriate messages to all the other cores to enable and update the watchdog. Signed-off-by: Chen Gong Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton diff --git a/drivers/watchdog/booke_wdt.c b/drivers/watchdog/booke_wdt.c index d362f5b..c1ba0db 100644 --- a/drivers/watchdog/booke_wdt.c +++ b/drivers/watchdog/booke_wdt.c @@ -1,12 +1,10 @@ /* - * drivers/char/watchdog/booke_wdt.c - * * Watchdog timer for PowerPC Book-E systems * * Author: Matthew McClintock * Maintainer: Kumar Gala * - * Copyright 2005 Freescale Semiconductor Inc. + * Copyright 2005, 2008 Freescale Semiconductor Inc. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -16,6 +14,7 @@ #include #include +#include #include #include #include @@ -38,7 +37,7 @@ #define WDT_PERIOD_DEFAULT 3 /* Refer to the PPC40x and PPC4xx manuals */ #endif /* for timing information */ -u32 booke_wdt_enabled = 0; +u32 booke_wdt_enabled; u32 booke_wdt_period = WDT_PERIOD_DEFAULT; #ifdef CONFIG_FSL_BOOKE @@ -47,33 +46,31 @@ u32 booke_wdt_period = WDT_PERIOD_DEFAULT; #define WDTP(x) (TCR_WP(x)) #endif -/* - * booke_wdt_ping: - */ -static __inline__ void booke_wdt_ping(void) +static DEFINE_SPINLOCK(booke_wdt_lock); + +static void __booke_wdt_ping(void *data) { mtspr(SPRN_TSR, TSR_ENW|TSR_WIS); } -/* - * booke_wdt_enable: - */ -static __inline__ void booke_wdt_enable(void) +static void booke_wdt_ping(void) +{ + on_each_cpu(__booke_wdt_ping, NULL, 0, 0); +} + +static void __booke_wdt_enable(void *data) { u32 val; /* clear status before enabling watchdog */ - booke_wdt_ping(); + __booke_wdt_ping(NULL); val = mfspr(SPRN_TCR); val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period)); mtspr(SPRN_TCR, val); } -/* - * booke_wdt_write: - */ -static ssize_t booke_wdt_write (struct file *file, const char __user *buf, +static ssize_t booke_wdt_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { booke_wdt_ping(); @@ -81,15 +78,11 @@ static ssize_t booke_wdt_write (struct file *file, const char __user *buf, } static struct watchdog_info ident = { - .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, - .firmware_version = 0, - .identity = "PowerPC Book-E Watchdog", + .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING, + .identity = "PowerPC Book-E Watchdog", }; -/* - * booke_wdt_ioctl: - */ -static int booke_wdt_ioctl (struct inode *inode, struct file *file, +static int booke_wdt_ioctl(struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg) { u32 tmp = 0; @@ -97,7 +90,7 @@ static int booke_wdt_ioctl (struct inode *inode, struct file *file, switch (cmd) { case WDIOC_GETSUPPORT: - if (copy_to_user ((struct watchdog_info __user *) arg, &ident, + if (copy_to_user((struct watchdog_info __user *)arg, &ident, sizeof(struct watchdog_info))) return -EFAULT; case WDIOC_GETSTATUS: @@ -132,33 +125,33 @@ static int booke_wdt_ioctl (struct inode *inode, struct file *file, return 0; } -/* - * booke_wdt_open: - */ -static int booke_wdt_open (struct inode *inode, struct file *file) + +static int booke_wdt_open(struct inode *inode, struct file *file) { + spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 0) { booke_wdt_enabled = 1; - booke_wdt_enable(); - printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", - booke_wdt_period); + on_each_cpu(__booke_wdt_enable, NULL, 0, 0); + printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " + "(wdt_period=%d)\n", booke_wdt_period); } + spin_unlock(&booke_wdt_lock); return nonseekable_open(inode, file); } static const struct file_operations booke_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = booke_wdt_write, - .ioctl = booke_wdt_ioctl, - .open = booke_wdt_open, + .owner = THIS_MODULE, + .llseek = no_llseek, + .write = booke_wdt_write, + .ioctl = booke_wdt_ioctl, + .open = booke_wdt_open, }; static struct miscdevice booke_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &booke_wdt_fops, + .minor = WATCHDOG_MINOR, + .name = "watchdog", + .fops = &booke_wdt_fops, }; static void __exit booke_wdt_exit(void) @@ -166,28 +159,27 @@ static void __exit booke_wdt_exit(void) misc_deregister(&booke_wdt_miscdev); } -/* - * booke_wdt_init: - */ static int __init booke_wdt_init(void) { int ret = 0; - printk (KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n"); + printk(KERN_INFO "PowerPC Book-E Watchdog Timer Loaded\n"); ident.firmware_version = cur_cpu_spec->pvr_value; ret = misc_register(&booke_wdt_miscdev); if (ret) { - printk (KERN_CRIT "Cannot register miscdev on minor=%d (err=%d)\n", + printk(KERN_CRIT "Cannot register miscdev on minor=%d: %d\n", WATCHDOG_MINOR, ret); return ret; } + spin_lock(&booke_wdt_lock); if (booke_wdt_enabled == 1) { - printk (KERN_INFO "PowerPC Book-E Watchdog Timer Enabled (wdt_period=%d)\n", - booke_wdt_period); - booke_wdt_enable(); + printk(KERN_INFO "PowerPC Book-E Watchdog Timer Enabled " + "(wdt_period=%d)\n", booke_wdt_period); + on_each_cpu(__booke_wdt_enable, NULL, 0, 0); } + spin_unlock(&booke_wdt_lock); return ret; } -- cgit v0.10.2 From a49056da0325742d3b4f5d1ef7bf8ab0690c3888 Mon Sep 17 00:00:00 2001 From: Gabriel C Date: Wed, 30 Apr 2008 16:51:10 +0200 Subject: [WATCHDOG] Add ICH9DO into the iTCO_wdt.c driver Add the Intel ICH9DO controller ID's for the iTCO_wdt kernel driver and bump the driver version. Tested on an P5E-VM DO ASUS motherboard. Signed-off-by: Gabriel Craciunescu Signed-off-by: Wim Van Sebroeck Signed-off-by: Andrew Morton diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c index a0e6809..95ba985 100644 --- a/drivers/watchdog/iTCO_wdt.c +++ b/drivers/watchdog/iTCO_wdt.c @@ -41,9 +41,10 @@ * 82801HH (ICH8DH) : document number 313056-003, 313057-009, * 82801HO (ICH8DO) : document number 313056-003, 313057-009, * 82801HEM (ICH8M-E) : document number 313056-003, 313057-009, - * 82801IB (ICH9) : document number 316972-001, 316973-001, - * 82801IR (ICH9R) : document number 316972-001, 316973-001, - * 82801IH (ICH9DH) : document number 316972-001, 316973-001, + * 82801IB (ICH9) : document number 316972-001, 316973-006, + * 82801IR (ICH9R) : document number 316972-001, 316973-006, + * 82801IH (ICH9DH) : document number 316972-001, 316973-006, + * 82801IO (ICH9DO) : document number 316972-001, 316973-006, * 6300ESB (6300ESB) : document number 300641-003, 300884-010, * 631xESB (631xESB) : document number 313082-001, 313075-005, * 632xESB (632xESB) : document number 313082-001, 313075-005 @@ -55,8 +56,8 @@ /* Module and version information */ #define DRV_NAME "iTCO_wdt" -#define DRV_VERSION "1.02" -#define DRV_RELDATE "26-Jul-2007" +#define DRV_VERSION "1.03" +#define DRV_RELDATE "30-Apr-2008" #define PFX DRV_NAME ": " /* Includes */ @@ -104,6 +105,7 @@ enum iTCO_chipsets { TCO_ICH9, /* ICH9 */ TCO_ICH9R, /* ICH9R */ TCO_ICH9DH, /* ICH9DH */ + TCO_ICH9DO, /* ICH9DO */ TCO_631XESB, /* 631xESB/632xESB */ }; @@ -136,6 +138,7 @@ static struct { {"ICH9", 2}, {"ICH9R", 2}, {"ICH9DH", 2}, + {"ICH9DO", 2}, {"631xESB/632xESB", 2}, {NULL,0} }; @@ -181,6 +184,7 @@ static struct pci_device_id iTCO_wdt_pci_tbl[] = { { ITCO_PCI_DEVICE(0x2918, TCO_ICH9 )}, { ITCO_PCI_DEVICE(0x2916, TCO_ICH9R )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_2, TCO_ICH9DH )}, + { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ICH9_4, TCO_ICH9DO )}, { ITCO_PCI_DEVICE(PCI_DEVICE_ID_INTEL_ESB2_0, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2671, TCO_631XESB)}, { ITCO_PCI_DEVICE(0x2672, TCO_631XESB)}, -- cgit v0.10.2 From 97e08f5d732bbfd5180f73aa7875d328421bee8a Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Sat, 24 May 2008 18:05:47 +0200 Subject: [ALSA] snd-pcsp - fix pcsp_treble_info() to honour an item number This solves the problem with mixers wrongly displaying the PWM freq. Signed-off-by: Stas Sergeev Signed-off-by: Takashi Iwai diff --git a/sound/drivers/pcsp/pcsp.h b/sound/drivers/pcsp/pcsp.h index f07cc1e..1d661f7 100644 --- a/sound/drivers/pcsp/pcsp.h +++ b/sound/drivers/pcsp/pcsp.h @@ -24,7 +24,8 @@ static DEFINE_SPINLOCK(i8253_lock); /* default timer freq for PC-Speaker: 18643 Hz */ #define DIV_18KHZ 64 #define MAX_DIV DIV_18KHZ -#define CUR_DIV() (MAX_DIV >> chip->treble) +#define CALC_DIV(d) (MAX_DIV >> (d)) +#define CUR_DIV() CALC_DIV(chip->treble) #define PCSP_MAX_TREBLE 1 /* unfortunately, with hrtimers 37KHz does not work very well :( */ @@ -36,7 +37,8 @@ static DEFINE_SPINLOCK(i8253_lock); #define PCSP_DEFAULT_SDIV (DIV_18KHZ >> 1) #define PCSP_DEFAULT_SRATE (PIT_TICK_RATE / PCSP_DEFAULT_SDIV) #define PCSP_INDEX_INC() (1 << (PCSP_MAX_TREBLE - chip->treble)) -#define PCSP_RATE() (PIT_TICK_RATE / CUR_DIV()) +#define PCSP_CALC_RATE(i) (PIT_TICK_RATE / CALC_DIV(i)) +#define PCSP_RATE() PCSP_CALC_RATE(chip->treble) #define PCSP_MIN_RATE__1 MAX_DIV/PIT_TICK_RATE #define PCSP_MAX_RATE__1 MIN_DIV/PIT_TICK_RATE #define PCSP_MAX_PERIOD_NS (1000000000ULL * PCSP_MIN_RATE__1) diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c index 64a695f..caeb0f5 100644 --- a/sound/drivers/pcsp/pcsp_mixer.c +++ b/sound/drivers/pcsp/pcsp_mixer.c @@ -50,7 +50,8 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol, uinfo->value.enumerated.items = chip->max_treble + 1; if (uinfo->value.enumerated.item > chip->max_treble) uinfo->value.enumerated.item = chip->max_treble; - sprintf(uinfo->value.enumerated.name, "%d", PCSP_RATE()); + sprintf(uinfo->value.enumerated.name, "%d", + PCSP_CALC_RATE(uinfo->value.enumerated.item)); return 0; } -- cgit v0.10.2 From 587755f1f6a983a9f0f3322d284034f4e146891a Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sun, 25 May 2008 18:20:06 +0200 Subject: [ALSA] hda - Fix capture mute Widget for stac9250/9251 Fix capture mute widget for STAC9250/9251 codecs. The widget 0x09 has no mute but 0x14 does actually. Signed-off-by: Mauro Carvalho Chehab diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 393f7fd..a4f44a0 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -840,7 +840,7 @@ static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { static struct snd_kcontrol_new stac925x_mixer[] = { STAC_INPUT_SOURCE(1), HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT), - HDA_CODEC_MUTE("Capture Switch", 0x09, 0, HDA_OUTPUT), + HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT), HDA_CODEC_VOLUME("Capture Mux Volume", 0x0f, 0, HDA_OUTPUT), { } /* end */ }; -- cgit v0.10.2 From 656a3f797889dafcce2f5b8b222ad66e9974b6f7 Mon Sep 17 00:00:00 2001 From: Gabriel C Date: Wed, 21 May 2008 20:36:19 +0200 Subject: scripts/ver_linux use 'gcc -dumpversion' These magic greps and hacks in ver_linux to get the gcc version always break after some gcc releases. Since now gcc >4.3 allows compiling with '--with-pkgversion' ( which can be everything 'My Cool Gcc' or something ) ver_linux will report random junk for these. Simply use 'gcc -dumpversion' to get the gcc version which should always work. Signed-off-by: Gabriel C Signed-off-by: Andrew Morton Signed-off-by: Sam Ravnborg diff --git a/scripts/ver_linux b/scripts/ver_linux index ab69ece..7ac0e30 100755 --- a/scripts/ver_linux +++ b/scripts/ver_linux @@ -12,12 +12,9 @@ echo ' ' uname -a echo ' ' -gcc --version 2>&1| head -n 1 | grep -v gcc | awk \ +gcc -dumpversion 2>&1| awk \ 'NR==1{print "Gnu C ", $1}' -gcc --version 2>&1| grep gcc | awk \ -'NR==1{print "Gnu C ", $3}' - make --version 2>&1 | awk -F, '{print $1}' | awk \ '/GNU Make/{print "Gnu make ",$NF}' -- cgit v0.10.2 From 9723c046bd5989aa9064038ce142f498bb1870d6 Mon Sep 17 00:00:00 2001 From: Jike Song Date: Thu, 22 May 2008 09:23:10 +0800 Subject: .gitignore: match ncscope.out Sometimes I got this: $ git-status {snip} # On branch master # Untracked files: # (use "git add ..." to include in what will be committed) # # ncscope.out nothing added to commit but untracked files present (use "git add" to track) Fix it. Signed-off-by: Jike Song Signed-off-by: Sam Ravnborg diff --git a/.gitignore b/.gitignore index 9c0d650..d24ad50 100644 --- a/.gitignore +++ b/.gitignore @@ -52,6 +52,7 @@ series # cscope files cscope.* +ncscope.* *.orig *~ -- cgit v0.10.2 From 73531905ed53576d9e8707659a761e7046a60497 Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sun, 25 May 2008 23:03:18 +0200 Subject: Kconfig: introduce ARCH_DEFCONFIG to DEFCONFIG_LIST init/Kconfig contains a list of configs that are searched for if 'make *config' are used with no .config present. Extend this list to look at the config identified by ARCH_DEFCONFIG. With this change we now try the defconfig targets last. This fixes a regression reported by: Linus Torvalds Signed-off-by: Sam Ravnborg Cc: Linus Torvalds Cc: Thomas Gleixner Cc: Ingo Molnar Cc: "H. Peter Anvin" diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index fe361ae..dcbec34 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -26,17 +26,10 @@ config X86 select HAVE_KVM if ((X86_32 && !X86_VOYAGER && !X86_VISWS && !X86_NUMAQ) || X86_64) select HAVE_ARCH_KGDB if !X86_VOYAGER -config DEFCONFIG_LIST +config ARCH_DEFCONFIG string - depends on X86_32 - option defconfig_list - default "arch/x86/configs/i386_defconfig" - -config DEFCONFIG_LIST - string - depends on X86_64 - option defconfig_list - default "arch/x86/configs/x86_64_defconfig" + default "arch/x86/configs/i386_defconfig" if X86_32 + default "arch/x86/configs/x86_64_defconfig" if X86_64 config GENERIC_LOCKBREAK diff --git a/init/Kconfig b/init/Kconfig index 6135d07..6199d11 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -13,6 +13,7 @@ config DEFCONFIG_LIST default "/lib/modules/$UNAME_RELEASE/.config" default "/etc/kernel-config" default "/boot/config-$UNAME_RELEASE" + default "$ARCH_DEFCONFIG" default "arch/$ARCH/defconfig" menu "General setup" -- cgit v0.10.2 From 9c28faaab19132b3f029d4ffa9a4dee8a11f0cbb Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 26 May 2008 11:45:45 +0900 Subject: sh: Drop broken URAM support on SH7723. This was copied over from the previous MobileR bits, which doesn't apply to R2. The URAM block on R2 is recycled for the L2 instead. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 8a68160..9a854c8 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -281,7 +281,6 @@ config CPU_SUBTYPE_SH7723 select CPU_SH4A select CPU_SHX2 select ARCH_SPARSEMEM_ENABLE - select SYS_SUPPORTS_NUMA help Select SH7723 if you have an SH-MobileR2 CPU. diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 629b06c..566ce79 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -292,9 +292,3 @@ void __init plat_irq_setup(void) { register_intc_controller(&intc_desc); } - -void __init plat_mem_setup(void) -{ - /* Register the URAM space as Node 1 */ - setup_bootmem_node(1, 0x055f0000, 0x05610000); -} -- cgit v0.10.2 From 551dec47bb5964478db594385a896eb0d4ab2b0a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 25 May 2008 22:50:16 -0700 Subject: sparc64: global_reg_snapshot is not for userspace global_reg_snapshot shouldn't be visible in our userspace headers. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller diff --git a/include/asm-sparc64/ptrace.h b/include/asm-sparc64/ptrace.h index d8a56cd..b163da7 100644 --- a/include/asm-sparc64/ptrace.h +++ b/include/asm-sparc64/ptrace.h @@ -126,6 +126,8 @@ struct sparc_trapf { #define TRACEREG32_SZ sizeof(struct pt_regs32) #define STACKFRAME32_SZ sizeof(struct sparc_stackf32) +#ifdef __KERNEL__ + struct global_reg_snapshot { unsigned long tstate; unsigned long tpc; @@ -137,8 +139,6 @@ struct global_reg_snapshot { unsigned long pad2; }; -#ifdef __KERNEL__ - #define __ARCH_WANT_COMPAT_SYS_PTRACE #define force_successful_syscall_return() \ @@ -306,6 +306,8 @@ extern void __show_regs(struct pt_regs *); #define SF_XARG5 0x58 #define SF_XXARG 0x5c +#ifdef __KERNEL__ + /* global_reg_snapshot offsets */ #define GR_SNAP_TSTATE 0x00 #define GR_SNAP_TPC 0x08 @@ -316,6 +318,8 @@ extern void __show_regs(struct pt_regs *); #define GR_SNAP_PAD1 0x30 #define GR_SNAP_PAD2 0x38 +#endif /* __KERNEL__ */ + /* Stuff for the ptrace system call */ #define PTRACE_SPARC_DETACH 11 #define PTRACE_GETREGS 12 -- cgit v0.10.2 From a0ed3d8d94b6a28c886cf9c023693afa3bb773f2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 5 May 2008 21:29:57 +0300 Subject: avr32: export copy_page This patch fixes the following build error: <-- snip --> ... MODPOST 61 modules ERROR: "copy_page" [fs/fuse/fuse.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Also add an empty line since *_page aren't "String functions". Signed-off-by: Adrian Bunk Signed-off-by: Haavard Skinnemoen diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 80f55f8..3a090ba 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -29,7 +29,9 @@ EXPORT_SYMBOL(__avr32_asr64); */ EXPORT_SYMBOL(memset); EXPORT_SYMBOL(memcpy); + EXPORT_SYMBOL(clear_page); +EXPORT_SYMBOL(copy_page); /* * Userspace access stuff. -- cgit v0.10.2 From 01575995de4289aa73aa7cb22cf8fe0461093589 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 22 May 2008 01:01:38 +0300 Subject: avr32: export strnlen_user This patch fixes the following build error: <-- snip --> ... MODPOST 1327 modules ERROR: "strnlen_user" [drivers/input/misc/uinput.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Haavard Skinnemoen diff --git a/arch/avr32/kernel/avr32_ksyms.c b/arch/avr32/kernel/avr32_ksyms.c index 3a090ba..84a7d44 100644 --- a/arch/avr32/kernel/avr32_ksyms.c +++ b/arch/avr32/kernel/avr32_ksyms.c @@ -43,6 +43,8 @@ EXPORT_SYMBOL(strncpy_from_user); EXPORT_SYMBOL(__strncpy_from_user); EXPORT_SYMBOL(clear_user); EXPORT_SYMBOL(__clear_user); +EXPORT_SYMBOL(strnlen_user); + EXPORT_SYMBOL(csum_partial); EXPORT_SYMBOL(csum_partial_copy_generic); -- cgit v0.10.2 From d56acacdcd370c0077821a012607876cb11b1b3b Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Mon, 26 May 2008 13:25:05 +0200 Subject: avr32: Update defconfigs Just provide reasonable defaults for the new stuff. Tickless and hrtimers are turned on for all boards except ATSTK1004. Signed-off-by: Haavard Skinnemoen diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index 0604607..119edb8 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc7 -# Wed Jan 9 23:20:41 2008 +# Linux kernel version: 2.6.26-rc3 +# Mon May 26 13:30:59 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y @@ -37,17 +37,15 @@ CONFIG_POSIX_MQUEUE=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -61,11 +59,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -73,11 +73,21 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_HAVE_KPROBES=y +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set @@ -101,10 +111,15 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # System Type and features # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y @@ -141,16 +156,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set +CONFIG_NMI_DEBUGGING=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_CMDLINE="" # @@ -164,9 +182,10 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set # CONFIG_CPU_FREQ_STAT is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set @@ -202,6 +221,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=y # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -255,87 +275,40 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set -CONFIG_BRIDGE_NETFILTER=y +# CONFIG_NETFILTER_ADVANCED is not set # # Core Netfilter Configuration # -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m +CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_NETLINK_LOG=m CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -# CONFIG_NF_CONNTRACK_EVENTS is not set -CONFIG_NF_CT_PROTO_GRE=m -# CONFIG_NF_CT_PROTO_SCTP is not set -# CONFIG_NF_CT_PROTO_UDPLITE is not set -CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m +CONFIG_NF_CT_NETLINK=m CONFIG_NETFILTER_XTABLES=y -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set -# CONFIG_NETFILTER_XT_TARGET_DSCP is not set CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NFLOG=m -# CONFIG_NETFILTER_XT_TARGET_NOTRACK is not set -# CONFIG_NETFILTER_XT_TARGET_TRACE is not set CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -# CONFIG_NETFILTER_XT_MATCH_DCCP is not set -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m CONFIG_NETFILTER_XT_MATCH_MARK=m CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -# CONFIG_NETFILTER_XT_MATCH_SCTP is not set CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -# CONFIG_NETFILTER_XT_MATCH_TIME is not set -# CONFIG_NETFILTER_XT_MATCH_U32 is not set -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m # # IP: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV4=m CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_IPRANGE=m -CONFIG_IP_NF_MATCH_TOS=m -CONFIG_IP_NF_MATCH_RECENT=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_MATCH_OWNER=m -CONFIG_IP_NF_MATCH_ADDRTYPE=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m CONFIG_IP_NF_TARGET_LOG=m @@ -343,54 +316,25 @@ CONFIG_IP_NF_TARGET_LOG=m CONFIG_NF_NAT=m CONFIG_NF_NAT_NEEDED=y CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_SAME=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m +# CONFIG_NF_NAT_TFTP is not set +# CONFIG_NF_NAT_AMANDA is not set +# CONFIG_NF_NAT_PPTP is not set +# CONFIG_NF_NAT_H323 is not set CONFIG_NF_NAT_SIP=m CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_TOS=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m # -# IPv6: Netfilter Configuration (EXPERIMENTAL) +# IPv6: Netfilter Configuration # CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_IP6_NF_QUEUE=m CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_OWNER=m CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_EUI64=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_LOG=m CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_RAW=m - -# -# Bridge: Netfilter Configuration -# -# CONFIG_BRIDGE_NF_EBTABLES is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set @@ -407,7 +351,6 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y # # Network testing @@ -415,6 +358,7 @@ CONFIG_NET_CLS_ROUTE=y # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -450,6 +394,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -531,11 +476,18 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set -# CONFIG_MISC_DEVICES is not set -# CONFIG_IDE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_ATMEL_PWM is not set +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ATMEL_SSC is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HAVE_IDE is not set # # SCSI device support @@ -568,11 +520,13 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MACB=y +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -586,6 +540,7 @@ CONFIG_MACB=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -599,7 +554,6 @@ CONFIG_PPPOE=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -621,6 +575,7 @@ CONFIG_SLHC=m # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -633,6 +588,7 @@ CONFIG_SLHC=m # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -640,21 +596,13 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support @@ -665,27 +613,23 @@ CONFIG_I2C_GPIO=m # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -702,9 +646,27 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -724,12 +686,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -753,14 +725,12 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -772,6 +742,7 @@ CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -787,6 +758,7 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -797,11 +769,13 @@ CONFIG_MMC=m CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers # CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -816,6 +790,8 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -844,19 +820,22 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -865,10 +844,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -885,14 +860,11 @@ CONFIG_JBD=m # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -948,8 +920,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -957,12 +931,10 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1030,11 +1002,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1042,6 +1009,7 @@ CONFIG_KPROBES=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,7 +1020,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1066,12 +1036,14 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -# CONFIG_FORCED_INLINING is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -1083,52 +1055,90 @@ CONFIG_FRAME_POINTER=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=y -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=m @@ -1137,10 +1147,6 @@ CONFIG_CRC7=m # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index 2fb2ede..c6d02ea 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc7 -# Wed Jan 9 23:07:43 2008 +# Linux kernel version: 2.6.26-rc3 +# Mon May 26 13:30:20 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y @@ -36,15 +36,15 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -58,11 +58,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -70,11 +72,21 @@ CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_HAVE_KPROBES=y +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -98,10 +110,15 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # System Type and features # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y @@ -147,16 +164,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set +CONFIG_NMI_DEBUGGING=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_CMDLINE="" # @@ -170,9 +190,10 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set # CONFIG_CPU_FREQ_STAT is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set @@ -208,6 +229,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set # CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=m # CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y @@ -252,8 +274,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -279,6 +303,7 @@ CONFIG_LLC=m # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -314,6 +339,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -368,6 +394,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DATAFLASH=m CONFIG_MTD_M25P80=m +CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -395,13 +422,18 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=m +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 # CONFIG_EEPROM_93CX6 is not set CONFIG_ATMEL_SSC=m -# CONFIG_IDE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HAVE_IDE is not set # # SCSI device support @@ -444,6 +476,9 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set CONFIG_PATA_AT32=m # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set @@ -469,11 +504,13 @@ CONFIG_PHYLIB=y # CONFIG_SMSC_PHY is not set # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_MACB=y +# CONFIG_ENC28J60 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -487,6 +524,7 @@ CONFIG_MACB=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -500,7 +538,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -556,6 +593,7 @@ CONFIG_MOUSE_GPIO=m # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -568,6 +606,7 @@ CONFIG_MOUSE_GPIO=m # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -575,21 +614,13 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support @@ -600,27 +631,23 @@ CONFIG_I2C_GPIO=m # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -637,9 +664,27 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -659,12 +704,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -682,8 +737,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -749,7 +804,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000 # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP # # @@ -761,14 +820,12 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -781,6 +838,7 @@ CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -796,6 +854,7 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -806,17 +865,20 @@ CONFIG_MMC=m CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +CONFIG_MMC_TEST=m # # MMC/SD Host Controller Drivers # CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=m # # LED drivers # +CONFIG_LEDS_ATMEL_PWM=m CONFIG_LEDS_GPIO=m # @@ -825,6 +887,8 @@ CONFIG_LEDS_GPIO=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_HEARTBEAT=m +CONFIG_LEDS_TRIGGER_DEFAULT_ON=m +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -853,19 +917,22 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -874,10 +941,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -895,14 +958,11 @@ CONFIG_JBD=m # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -CONFIG_MINIX_FS=m -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -957,8 +1017,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +CONFIG_MINIX_FS=m # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y @@ -966,7 +1028,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1028,11 +1089,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -# CONFIG_MARKERS is not set # # Kernel hacking @@ -1040,6 +1096,7 @@ CONFIG_KPROBES=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1050,7 +1107,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -1064,12 +1123,14 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -1081,52 +1142,90 @@ CONFIG_FORCED_INLINING=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m CONFIG_CRYPTO_HASH=m CONFIG_CRYPTO_MANAGER=m +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=m +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=m # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=m +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=m -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=m -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SALSA20 is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=m diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 45e23e0..5a4ae6b 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc7 -# Wed Jan 9 22:54:34 2008 +# Linux kernel version: 2.6.26-rc3 +# Mon May 26 13:33:05 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y @@ -39,17 +39,15 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y # CONFIG_TASK_XACCT is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set CONFIG_AUDIT=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y @@ -63,11 +61,13 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set # CONFIG_BASE_FULL is not set CONFIG_FUTEX=y CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y @@ -75,11 +75,20 @@ CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set -CONFIG_SLABINFO=y +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=m +CONFIG_HAVE_OPROFILE=y +CONFIG_KPROBES=y +CONFIG_HAVE_KPROBES=y +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -103,10 +112,15 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y # # System Type and features # +CONFIG_TICK_ONESHOT=y +CONFIG_NO_HZ=y +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y @@ -152,16 +166,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set +CONFIG_NMI_DEBUGGING=y # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_CMDLINE="" # @@ -175,9 +192,10 @@ CONFIG_CPU_FREQ=y CONFIG_CPU_FREQ_TABLE=y # CONFIG_CPU_FREQ_DEBUG is not set # CONFIG_CPU_FREQ_STAT is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set @@ -234,8 +252,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -260,6 +276,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_NET_PKTGEN is not set # CONFIG_NET_TCPPROBE is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -295,6 +312,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -349,6 +367,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_DATAFLASH=m CONFIG_MTD_M25P80=m +CONFIG_M25PXX_USE_FAST_READ=y # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -376,13 +395,18 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=m CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y +CONFIG_ATMEL_PWM=m +CONFIG_ATMEL_TCLIB=y +CONFIG_ATMEL_TCB_CLKSRC=y +CONFIG_ATMEL_TCB_CLKSRC_BLOCK=0 # CONFIG_EEPROM_93CX6 is not set CONFIG_ATMEL_SSC=m -# CONFIG_IDE is not set +# CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HAVE_IDE is not set # # SCSI device support @@ -427,6 +451,9 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=m # CONFIG_ATA_NONSTANDARD is not set +# CONFIG_SATA_PMP is not set +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set CONFIG_PATA_AT32=m # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set @@ -447,6 +474,7 @@ CONFIG_NETDEVICES=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set CONFIG_PPP=m # CONFIG_PPP_MULTILINK is not set @@ -460,7 +488,6 @@ CONFIG_PPP_BSDCOMP=m # CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set CONFIG_SLHC=m -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -516,6 +543,7 @@ CONFIG_MOUSE_GPIO=m # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -528,6 +556,7 @@ CONFIG_MOUSE_GPIO=m # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +CONFIG_SERIAL_ATMEL_PDC=y # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -535,21 +564,13 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set # # I2C Hardware Bus support @@ -560,27 +581,23 @@ CONFIG_I2C_GPIO=m # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support # -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_EEPROM is not set # CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -597,9 +614,27 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# +# CONFIG_DEBUG_GPIO is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -619,12 +654,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -682,7 +727,11 @@ CONFIG_SND_AT73C213_TARGET_BITRATE=48000 # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs +# + +# +# SoC Audio for the Texas Instruments OMAP # # @@ -694,14 +743,12 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -714,6 +761,7 @@ CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -729,6 +777,7 @@ CONFIG_USB_FILE_STORAGE=m # CONFIG_USB_FILE_STORAGE_TEST is not set CONFIG_USB_G_SERIAL=m # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set CONFIG_MMC=m # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set @@ -739,17 +788,20 @@ CONFIG_MMC=m CONFIG_MMC_BLOCK=m # CONFIG_MMC_BLOCK_BOUNCE is not set # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers # CONFIG_MMC_SPI=m +# CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +CONFIG_LEDS_ATMEL_PWM=m CONFIG_LEDS_GPIO=y # @@ -758,6 +810,8 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +CONFIG_LEDS_TRIGGER_DEFAULT_ON=y +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -786,19 +840,22 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_PCF8563 is not set # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -807,11 +864,8 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y - -# -# Userspace I/O -# CONFIG_UIO=m +# CONFIG_UIO_SMX is not set # # File systems @@ -828,14 +882,11 @@ CONFIG_JBD=m # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +# CONFIG_DNOTIFY is not set CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m @@ -891,8 +942,10 @@ CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # CONFIG_NETWORK_FILESYSTEMS is not set @@ -943,11 +996,6 @@ CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # CONFIG_DLM is not set -CONFIG_INSTRUMENTATION=y -CONFIG_PROFILING=y -CONFIG_OPROFILE=m -CONFIG_KPROBES=y -# CONFIG_MARKERS is not set # # Kernel hacking @@ -955,6 +1003,7 @@ CONFIG_KPROBES=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -965,6 +1014,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -978,12 +1028,14 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_KPROBES_SANITY_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -1000,6 +1052,8 @@ CONFIG_FORCED_INLINING=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=m diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index 634c527..a0912fb 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc7 -# Wed Jan 9 23:04:20 2008 +# Linux kernel version: 2.6.26-rc3 +# Mon May 26 13:34:57 2008 # CONFIG_AVR32=y CONFIG_GENERIC_GPIO=y @@ -13,10 +13,10 @@ CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_BUG=y @@ -34,15 +34,15 @@ CONFIG_LOCALVERSION="" # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -# CONFIG_FAIR_GROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y @@ -54,24 +54,38 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set # CONFIG_BASE_FULL is not set # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set # CONFIG_SIGNALFD is not set +# CONFIG_TIMERFD is not set # CONFIG_EVENTFD is not set CONFIG_SHMEM=y CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +CONFIG_HAVE_KPROBES=y +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +# CONFIG_PROC_PAGE_MONITOR is not set # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set +CONFIG_CLASSIC_RCU=y # # System Type and features # +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y CONFIG_SUBARCH_AVR32B=y CONFIG_MMU=y CONFIG_PERFORMANCE_COUNTERS=y @@ -115,16 +129,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y # CONFIG_OWNERSHIP_TRACE is not set +# CONFIG_NMI_DEBUGGING is not set # CONFIG_HZ_100 is not set CONFIG_HZ_250=y # CONFIG_HZ_300 is not set # CONFIG_HZ_1000 is not set CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set CONFIG_CMDLINE="" # @@ -134,20 +151,7 @@ CONFIG_CMDLINE="" # # CPU Frequency scaling # -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_TABLE=y -# CONFIG_CPU_FREQ_DEBUG is not set -# CONFIG_CPU_FREQ_STAT is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_AT32AP=y +# CONFIG_CPU_FREQ is not set # # Bus options @@ -197,8 +201,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -222,6 +224,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -255,6 +258,7 @@ CONFIG_MTD=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -321,6 +325,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set # CONFIG_MISC_DEVICES is not set +# CONFIG_HAVE_IDE is not set # # SCSI device support @@ -346,6 +351,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -358,6 +364,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_SERIAL_ATMEL=y CONFIG_SERIAL_ATMEL_CONSOLE=y +# CONFIG_SERIAL_ATMEL_PDC is not set # CONFIG_SERIAL_ATMEL_TTYAT is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y @@ -365,15 +372,9 @@ CONFIG_UNIX98_PTYS=y # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -389,9 +390,24 @@ CONFIG_SPI_ATMEL=y # CONFIG_SPI_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set +CONFIG_HAVE_GPIO_LIB=y + +# +# GPIO Support +# + +# +# I2C GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set CONFIG_WATCHDOG=y # CONFIG_WATCHDOG_NOWAYOUT is not set @@ -411,12 +427,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -434,8 +460,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -467,14 +493,12 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # - -# -# USB Gadget Support -# CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y @@ -485,6 +509,7 @@ CONFIG_USB_ATMEL_USBA=y # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -499,8 +524,11 @@ CONFIG_USB_ETH=y # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set # CONFIG_USB_MIDI_GADGET is not set +# CONFIG_USB_G_PRINTER is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -519,15 +547,17 @@ CONFIG_RTC_INTF_DEV=y # # SPI RTC drivers # -# CONFIG_RTC_DRV_RS5C348 is not set # CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set # # Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -536,18 +566,14 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_AT32AP700X=y - -# -# Userspace I/O -# # CONFIG_UIO is not set # # File systems # +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -580,7 +606,6 @@ CONFIG_JFFS2_RTIME=y # CONFIG_NETWORK_FILESYSTEMS is not set # CONFIG_NLS is not set # CONFIG_DLM is not set -# CONFIG_INSTRUMENTATION is not set # # Kernel hacking @@ -588,6 +613,7 @@ CONFIG_JFFS2_RTIME=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -608,6 +634,8 @@ CONFIG_MAGIC_SYSRQ=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_GENERIC_FIND_NEXT_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v0.10.2 From 7271e60a950b3677f136a31e084bc4b0463c7018 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 26 May 2008 16:08:40 +0200 Subject: tuner: Do not alter i2c_client.name The tuner driver used to change i2c_client.name for its own needs, but it really shouldn't, as this field is used by i2c-core to do the device/driver matching. So, create and use a separate field for the tuner driver needs. Signed-off-by: Michael Krufky Signed-off-by: Jean Delvare diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 198f0af..a0f7bc1 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -92,6 +92,7 @@ struct tuner { unsigned int type; /* chip type id */ unsigned int config; int (*tuner_callback) (void *dev, int command, int arg); + const char *name; }; /* standard i2c insmod options */ @@ -330,13 +331,13 @@ static void tuner_i2c_address_check(struct tuner *t) tuner_warn("Support for tuners in i2c address range 0x64 thru 0x6f\n"); tuner_warn("will soon be dropped. This message indicates that your\n"); tuner_warn("hardware has a %s tuner at i2c address 0x%02x.\n", - t->i2c->name, t->i2c->addr); + t->name, t->i2c->addr); tuner_warn("To ensure continued support for your device, please\n"); tuner_warn("send a copy of this message, along with full dmesg\n"); tuner_warn("output to v4l-dvb-maintainer@linuxtv.org\n"); tuner_warn("Please use subject line: \"obsolete tuner i2c address.\"\n"); tuner_warn("driver: %s, addr: 0x%02x, type: %d (%s)\n", - t->i2c->adapter->name, t->i2c->addr, t->type, t->i2c->name); + t->i2c->adapter->name, t->i2c->addr, t->type, t->name); tuner_warn("====================== WARNING! ======================\n"); } @@ -470,19 +471,17 @@ static void set_type(struct i2c_client *c, unsigned int type, if ((NULL == analog_ops->set_params) && (fe_tuner_ops->set_analog_params)) { - strlcpy(t->i2c->name, fe_tuner_ops->info.name, - sizeof(t->i2c->name)); + t->name = fe_tuner_ops->info.name; t->fe.analog_demod_priv = t; memcpy(analog_ops, &tuner_core_ops, sizeof(struct analog_demod_ops)); } else { - strlcpy(t->i2c->name, analog_ops->info.name, - sizeof(t->i2c->name)); + t->name = analog_ops->info.name; } - tuner_dbg("type set to %s\n", t->i2c->name); + tuner_dbg("type set to %s\n", t->name); if (t->mode_mask == T_UNINITIALIZED) t->mode_mask = new_mode_mask; @@ -1115,6 +1114,7 @@ static int tuner_probe(struct i2c_client *client, if (NULL == t) return -ENOMEM; t->i2c = client; + t->name = "(tuner unset)"; i2c_set_clientdata(client, t); t->type = UNSET; t->audmode = V4L2_TUNER_MODE_STEREO; @@ -1272,12 +1272,6 @@ static int tuner_remove(struct i2c_client *client) list_del(&t->list); kfree(t); - - /* The probing code has overwritten the device name, restore it so - that reloading the driver will work. Ideally the device name - should not be overwritten in the first place, but for now that - will do. */ - strlcpy(client->name, "tuner", I2C_NAME_SIZE); return 0; } -- cgit v0.10.2 From 2548baa07ddf37ea8604e9627f042616d1cdc43e Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Mon, 26 May 2008 16:08:40 +0200 Subject: i2c: Align i2c_device_id Align i2c_device_id.driver_data to 8 bytes to not fail on crossbuilds. (Added in d2653e92732bd3911feff6bee5e23dbf959381db.) Signed-off-by: Jiri Slaby Signed-off-by: Jean Delvare diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index d73ecea..69b2342 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -375,7 +375,8 @@ struct virtio_device_id { struct i2c_device_id { char name[I2C_NAME_SIZE]; - kernel_ulong_t driver_data; /* Data private to the driver */ + kernel_ulong_t driver_data /* Data private to the driver */ + __attribute__((aligned(sizeof(kernel_ulong_t)))); }; -- cgit v0.10.2 From 03cddb80ed2dacaf03c370d38bcc75f8303a03b8 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 5 Jun 2008 20:59:29 -0400 Subject: ext4: Fix use of uninitialized data with debug enabled. Fix use of uninitialized data with debug enabled. Signed-off-by: Aneesh Kumar K.V Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/mballoc.c b/fs/ext4/mballoc.c index 873ad9b..c9900aa 100644 --- a/fs/ext4/mballoc.c +++ b/fs/ext4/mballoc.c @@ -2745,8 +2745,6 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, sbi = EXT4_SB(sb); es = sbi->s_es; - ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group, - gdp->bg_free_blocks_count); err = -EIO; bitmap_bh = read_block_bitmap(sb, ac->ac_b_ex.fe_group); @@ -2762,6 +2760,9 @@ ext4_mb_mark_diskspace_used(struct ext4_allocation_context *ac, if (!gdp) goto out_err; + ext4_debug("using block group %lu(%d)\n", ac->ac_b_ex.fe_group, + gdp->bg_free_blocks_count); + err = ext4_journal_get_write_access(handle, gdp_bh); if (err) goto out_err; @@ -3094,8 +3095,7 @@ static void ext4_mb_use_inode_pa(struct ext4_allocation_context *ac, static void ext4_mb_use_group_pa(struct ext4_allocation_context *ac, struct ext4_prealloc_space *pa) { - unsigned len = ac->ac_o_ex.fe_len; - + unsigned int len = ac->ac_o_ex.fe_len; ext4_get_group_no_and_offset(ac->ac_sb, pa->pa_pstart, &ac->ac_b_ex.fe_group, &ac->ac_b_ex.fe_start); -- cgit v0.10.2 From 0bf7e8379ce7e0159a2a6bd3d937f2f6ada79799 Mon Sep 17 00:00:00 2001 From: "Jose R. Santos" Date: Tue, 3 Jun 2008 14:07:29 -0400 Subject: ext4: Fix uninit block group initialization with FLEX_BG With FLEX_BG block bitmaps, inode bitmaps and inode tables _MAY_ be allocated outside the group. So, when initializing an uninitialized block bitmap, we need to check the location of this blocks before setting the corresponding bits in the block bitmap of the newly initialized group. Also return the right number of free blocks when counting the available free blocks in uninit group. Tested-by: Aneesh Kumar K.V Signed-off-by: Jose R. Santos Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/balloc.c b/fs/ext4/balloc.c index 30494c5..9cc80b9 100644 --- a/fs/ext4/balloc.c +++ b/fs/ext4/balloc.c @@ -43,6 +43,46 @@ void ext4_get_group_no_and_offset(struct super_block *sb, ext4_fsblk_t blocknr, } +static int ext4_block_in_group(struct super_block *sb, ext4_fsblk_t block, + ext4_group_t block_group) +{ + ext4_group_t actual_group; + ext4_get_group_no_and_offset(sb, block, &actual_group, 0); + if (actual_group == block_group) + return 1; + return 0; +} + +static int ext4_group_used_meta_blocks(struct super_block *sb, + ext4_group_t block_group) +{ + ext4_fsblk_t tmp; + struct ext4_sb_info *sbi = EXT4_SB(sb); + /* block bitmap, inode bitmap, and inode table blocks */ + int used_blocks = sbi->s_itb_per_group + 2; + + if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG)) { + struct ext4_group_desc *gdp; + struct buffer_head *bh; + + gdp = ext4_get_group_desc(sb, block_group, &bh); + if (!ext4_block_in_group(sb, ext4_block_bitmap(sb, gdp), + block_group)) + used_blocks--; + + if (!ext4_block_in_group(sb, ext4_inode_bitmap(sb, gdp), + block_group)) + used_blocks--; + + tmp = ext4_inode_table(sb, gdp); + for (; tmp < ext4_inode_table(sb, gdp) + + sbi->s_itb_per_group; tmp++) { + if (!ext4_block_in_group(sb, tmp, block_group)) + used_blocks -= 1; + } + } + return used_blocks; +} /* Initializes an uninitialized block bitmap if given, and returns the * number of blocks free in the group. */ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, @@ -105,20 +145,34 @@ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, free_blocks = group_blocks - bit_max; if (bh) { - ext4_fsblk_t start; + ext4_fsblk_t start, tmp; + int flex_bg = 0; for (bit = 0; bit < bit_max; bit++) ext4_set_bit(bit, bh->b_data); start = ext4_group_first_block_no(sb, block_group); - /* Set bits for block and inode bitmaps, and inode table */ - ext4_set_bit(ext4_block_bitmap(sb, gdp) - start, bh->b_data); - ext4_set_bit(ext4_inode_bitmap(sb, gdp) - start, bh->b_data); - for (bit = (ext4_inode_table(sb, gdp) - start), - bit_max = bit + sbi->s_itb_per_group; bit < bit_max; bit++) - ext4_set_bit(bit, bh->b_data); + if (EXT4_HAS_INCOMPAT_FEATURE(sb, + EXT4_FEATURE_INCOMPAT_FLEX_BG)) + flex_bg = 1; + /* Set bits for block and inode bitmaps, and inode table */ + tmp = ext4_block_bitmap(sb, gdp); + if (!flex_bg || ext4_block_in_group(sb, tmp, block_group)) + ext4_set_bit(tmp - start, bh->b_data); + + tmp = ext4_inode_bitmap(sb, gdp); + if (!flex_bg || ext4_block_in_group(sb, tmp, block_group)) + ext4_set_bit(tmp - start, bh->b_data); + + tmp = ext4_inode_table(sb, gdp); + for (; tmp < ext4_inode_table(sb, gdp) + + sbi->s_itb_per_group; tmp++) { + if (!flex_bg || + ext4_block_in_group(sb, tmp, block_group)) + ext4_set_bit(tmp - start, bh->b_data); + } /* * Also if the number of blocks within the group is * less than the blocksize * 8 ( which is the size @@ -126,8 +180,7 @@ unsigned ext4_init_block_bitmap(struct super_block *sb, struct buffer_head *bh, */ mark_bitmap_end(group_blocks, sb->s_blocksize * 8, bh->b_data); } - - return free_blocks - sbi->s_itb_per_group - 2; + return free_blocks - ext4_group_used_meta_blocks(sb, block_group); } -- cgit v0.10.2 From 944600930a37aa725ba6f93c3244e2d77a1e3581 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Fri, 6 Jun 2008 18:05:52 -0400 Subject: ext4: fix online resize bug There is a bug when we are trying to verify that the reserve inode's double indirect blocks point back to the primary gdt blocks. The fix is obvious, we need to mod the gdb count by the addr's per block. This was verified using the same testcase as with the ext3 equivalent of this patch. Signed-off-by: Josef Bacik Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 9f086a6..9ecb92f 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -563,7 +563,8 @@ static int reserve_backup_gdb(handle_t *handle, struct inode *inode, } blk = EXT4_SB(sb)->s_sbh->b_blocknr + 1 + EXT4_SB(sb)->s_gdb_count; - data = (__le32 *)dind->b_data + EXT4_SB(sb)->s_gdb_count; + data = (__le32 *)dind->b_data + (EXT4_SB(sb)->s_gdb_count % + EXT4_ADDR_PER_BLOCK(sb)); end = (__le32 *)dind->b_data + EXT4_ADDR_PER_BLOCK(sb); /* Get each reserved primary GDT block and verify it holds backups */ -- cgit v0.10.2 From 8ea76900be3b4522396e2021260d2818a27b3a5b Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 26 May 2008 10:28:09 -0400 Subject: jbd2: Fix memory leak when verifying checksums in the journal Cc: Andreas Dilger Cc: Girish Shilamkar Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index 5d0405a..7199db5 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -344,6 +344,7 @@ static int calc_chksums(journal_t *journal, struct buffer_head *bh, *crc32_sum = crc32_be(*crc32_sum, (void *)obh->b_data, obh->b_size); } + put_bh(obh); } return 0; } -- cgit v0.10.2 From 624080eded68738daee041ad64672a9d2614754f Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Fri, 6 Jun 2008 17:50:40 -0400 Subject: jbd2: If a journal checksum error is detected, propagate the error to ext4 If a journal checksum error is detected, the ext4 filesystem will call ext4_error(), and the mount will either continue, become a read-only mount, or cause a kernel panic based on the superblock flags indicating the user's preference of what to do in case of filesystem corruption being detected. Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index 09d9359..d01a32e 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -2189,6 +2189,29 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) { if (ext4_load_journal(sb, es, journal_devnum)) goto failed_mount3; + if (!(sb->s_flags & MS_RDONLY) && + EXT4_SB(sb)->s_journal->j_failed_commit) { + printk(KERN_CRIT "EXT4-fs error (device %s): " + "ext4_fill_super: Journal transaction " + "%u is corrupt\n", sb->s_id, + EXT4_SB(sb)->s_journal->j_failed_commit); + if (test_opt (sb, ERRORS_RO)) { + printk (KERN_CRIT + "Mounting filesystem read-only\n"); + sb->s_flags |= MS_RDONLY; + EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; + es->s_state |= cpu_to_le16(EXT4_ERROR_FS); + } + if (test_opt(sb, ERRORS_PANIC)) { + EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS; + es->s_state |= cpu_to_le16(EXT4_ERROR_FS); + ext4_commit_super(sb, es, 1); + printk(KERN_CRIT + "EXT4-fs (device %s): mount failed\n", + sb->s_id); + goto failed_mount4; + } + } } else if (journal_inum) { if (ext4_create_journal(sb, es, journal_inum)) goto failed_mount3; diff --git a/fs/jbd2/recovery.c b/fs/jbd2/recovery.c index 7199db5..058f50f 100644 --- a/fs/jbd2/recovery.c +++ b/fs/jbd2/recovery.c @@ -611,9 +611,8 @@ static int do_one_pass(journal_t *journal, chksum_err = chksum_seen = 0; if (info->end_transaction) { - printk(KERN_ERR "JBD: Transaction %u " - "found to be corrupt.\n", - next_commit_ID - 1); + journal->j_failed_commit = + info->end_transaction; brelse(bh); break; } @@ -644,10 +643,8 @@ static int do_one_pass(journal_t *journal, if (!JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT)){ - printk(KERN_ERR - "JBD: Transaction %u " - "found to be corrupt.\n", - next_commit_ID); + journal->j_failed_commit = + next_commit_ID; brelse(bh); break; } diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 05e2b30..d147f0f 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -919,6 +919,9 @@ struct journal_s struct proc_dir_entry *j_proc_entry; struct transaction_stats_s j_stats; + /* Failed journal commit ID */ + unsigned int j_failed_commit; + /* * An opaque pointer to fs-private information. ext3 puts its * superblock pointer here -- cgit v0.10.2 From cd0b6a39a1d68b61b1073662f40f747c8b728f98 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Mon, 26 May 2008 10:28:28 -0400 Subject: ext4: Display the journal_async_commit mount option in /proc/mounts Cc: Andreas Dilger Cc: Girish Shilamkar Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/super.c b/fs/ext4/super.c index d01a32e..ba92c60 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -731,6 +731,8 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) } if (test_opt(sb, BARRIER)) seq_puts(seq, ",barrier=1"); + if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) + seq_puts(seq, ",journal_async_commit"); if (test_opt(sb, NOBH)) seq_puts(seq, ",nobh"); if (!test_opt(sb, EXTENTS)) -- cgit v0.10.2 From 034772b068be62a79470d6c1b81b01fbe27793ac Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 3 Jun 2008 22:31:11 -0400 Subject: jbd2: Fix barrier fallback code to re-lock the buffer head If the device doesn't support write barriers, the write is retried without ordered mode. But the buffer head needs to be re-locked or submit_bh will fail with on BUG(!buffer_locked(bh)). Signed-off-by: "Theodore Ts'o" diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index 4d99685..a2ed72f 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -168,6 +168,7 @@ static int journal_submit_commit_record(journal_t *journal, spin_unlock(&journal->j_state_lock); /* And try again, without the barrier */ + lock_buffer(bh); set_buffer_uptodate(bh); set_buffer_dirty(bh); ret = submit_bh(WRITE, bh); -- cgit v0.10.2 From 571640cad3fda6475da45d91cf86076f1f86bd9b Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 26 May 2008 12:29:46 -0400 Subject: ext4: enable barriers by default I can't think of any valid reason for ext4 to not use barriers when they are available; I believe this is necessary for filesystem integrity in the face of a volatile write cache on storage. An administrator who trusts that the cache is sufficiently battery- backed (and power supplies are sufficiently redundant, etc...) can always turn it back off again. SuSE has carried such a patch for ext3 for quite some time now. Also document the mount option while we're at it. Signed-off-by: Eric Sandeen Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/Documentation/filesystems/ext4.txt b/Documentation/filesystems/ext4.txt index 560f88d..0c5086d 100644 --- a/Documentation/filesystems/ext4.txt +++ b/Documentation/filesystems/ext4.txt @@ -139,8 +139,16 @@ commit=nrsec (*) Ext4 can be told to sync all its data and metadata Setting it to very large values will improve performance. -barrier=1 This enables/disables barriers. barrier=0 disables - it, barrier=1 enables it. +barrier=<0|1(*)> This enables/disables the use of write barriers in + the jbd code. barrier=0 disables, barrier=1 enables. + This also requires an IO stack which can support + barriers, and if jbd gets an error on a barrier + write, it will disable again with a warning. + Write barriers enforce proper on-disk ordering + of journal commits, making volatile disk write caches + safe to use, at some performance penalty. If + your disks are battery-backed in one way or another, + disabling barriers may safely improve performance. orlov (*) This enables the new Orlov block allocator. It is enabled by default. diff --git a/fs/ext4/super.c b/fs/ext4/super.c index ba92c60..cb96f127c 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -671,6 +671,7 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) unsigned long def_mount_opts; struct super_block *sb = vfs->mnt_sb; struct ext4_sb_info *sbi = EXT4_SB(sb); + journal_t *journal = sbi->s_journal; struct ext4_super_block *es = sbi->s_es; def_mount_opts = le32_to_cpu(es->s_default_mount_opts); @@ -729,8 +730,13 @@ static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs) seq_printf(seq, ",commit=%u", (unsigned) (sbi->s_commit_interval / HZ)); } - if (test_opt(sb, BARRIER)) - seq_puts(seq, ",barrier=1"); + /* + * We're changing the default of barrier mount option, so + * let's always display its mount state so it's clear what its + * status is. + */ + seq_puts(seq, ",barrier="); + seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0"); if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) seq_puts(seq, ",journal_async_commit"); if (test_opt(sb, NOBH)) @@ -1909,6 +1915,7 @@ static int ext4_fill_super (struct super_block *sb, void *data, int silent) sbi->s_resgid = le16_to_cpu(es->s_def_resgid); set_opt(sbi->s_mount_opt, RESERVATION); + set_opt(sbi->s_mount_opt, BARRIER); /* * turn on extents feature by default in ext4 filesystem -- cgit v0.10.2 From c8e85b4f4b9ee23bf0e79bdeb3da274a0f9c663f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 26 May 2008 20:55:42 +0400 Subject: posix timers: sigqueue_free: don't free sigqueue if it is queued Currently sigqueue_free() removes sigqueue from list, but doesn't cancel the pending signal. This is not consistent, the task should either receive the "full" signal along with siginfo_t, or it shouldn't receive the signal at all. Change sigqueue_free() to clear SIGQUEUE_PREALLOC but leave sigqueue on list if it is queued. This is a user-visible change. If the signal is blocked, it stays queued after sys_timer_delete() until unblocked with the "stale" si_code/si_value, and of course it is still counted wrt RLIMIT_SIGPENDING which also limits the number of posix timers. Signed-off-by: Oleg Nesterov Cc: Austin Clements Cc: Roland McGrath Signed-off-by: Linus Torvalds diff --git a/kernel/signal.c b/kernel/signal.c index 12ffea7..2955f6c 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -1240,18 +1240,22 @@ void sigqueue_free(struct sigqueue *q) BUG_ON(!(q->flags & SIGQUEUE_PREALLOC)); /* - * If the signal is still pending remove it from the - * pending queue. We must hold ->siglock while testing - * q->list to serialize with collect_signal() or with + * We must hold ->siglock while testing q->list + * to serialize with collect_signal() or with * __exit_signal()->flush_sigqueue(). */ spin_lock_irqsave(lock, flags); + q->flags &= ~SIGQUEUE_PREALLOC; + /* + * If it is queued it will be freed when dequeued, + * like the "regular" sigqueue. + */ if (!list_empty(&q->list)) - list_del_init(&q->list); + q = NULL; spin_unlock_irqrestore(lock, flags); - q->flags &= ~SIGQUEUE_PREALLOC; - __sigqueue_free(q); + if (q) + __sigqueue_free(q); } int send_sigqueue(struct sigqueue *q, struct task_struct *t, int group) -- cgit v0.10.2 From cbaffba12ce08beb3e80bfda148ee0fa14aac188 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Mon, 26 May 2008 20:55:42 +0400 Subject: posix timers: discard SI_TIMER signals on exec Based on Roland's patch. This approach was suggested by Austin Clements from the very beginning, and then by Linus. As Austin pointed out, the execing task can be killed by SI_TIMER signal because exec flushes the signal handlers, but doesn't discard the pending signals generated by posix timers. Perhaps not a bug, but people find this surprising. See http://bugzilla.kernel.org/show_bug.cgi?id=10460 Signed-off-by: Oleg Nesterov Cc: Austin Clements Cc: Roland McGrath Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index 3c2ba7c..9448f1b 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -860,6 +860,7 @@ static int de_thread(struct task_struct *tsk) no_thread_group: exit_itimers(sig); + flush_itimer_signals(); if (leader) release_task(leader); diff --git a/include/linux/sched.h b/include/linux/sched.h index 5395a61..3e05e54 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -1848,7 +1848,9 @@ extern void exit_thread(void); extern void exit_files(struct task_struct *); extern void __cleanup_signal(struct signal_struct *); extern void __cleanup_sighand(struct sighand_struct *); + extern void exit_itimers(struct signal_struct *); +extern void flush_itimer_signals(void); extern NORET_TYPE void do_group_exit(int); diff --git a/kernel/signal.c b/kernel/signal.c index 2955f6c..6c0958e 100644 --- a/kernel/signal.c +++ b/kernel/signal.c @@ -231,6 +231,40 @@ void flush_signals(struct task_struct *t) spin_unlock_irqrestore(&t->sighand->siglock, flags); } +static void __flush_itimer_signals(struct sigpending *pending) +{ + sigset_t signal, retain; + struct sigqueue *q, *n; + + signal = pending->signal; + sigemptyset(&retain); + + list_for_each_entry_safe(q, n, &pending->list, list) { + int sig = q->info.si_signo; + + if (likely(q->info.si_code != SI_TIMER)) { + sigaddset(&retain, sig); + } else { + sigdelset(&signal, sig); + list_del_init(&q->list); + __sigqueue_free(q); + } + } + + sigorsets(&pending->signal, &signal, &retain); +} + +void flush_itimer_signals(void) +{ + struct task_struct *tsk = current; + unsigned long flags; + + spin_lock_irqsave(&tsk->sighand->siglock, flags); + __flush_itimer_signals(&tsk->pending); + __flush_itimer_signals(&tsk->signal->shared_pending); + spin_unlock_irqrestore(&tsk->sighand->siglock, flags); +} + void ignore_signals(struct task_struct *t) { int i; -- cgit v0.10.2 From e490517a039a99d692cb3a5561941b0a5f576172 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 26 May 2008 11:07:53 -0700 Subject: Linux 2.6.26-rc4 diff --git a/Makefile b/Makefile index 20b3235..8db70fe 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Funky Weasel is Jiggy wit it # *DOCUMENTATION* -- cgit v0.10.2 From e8ffef73c8dd2c2d00287829db87cdaf229d3859 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 26 May 2008 15:20:34 -0700 Subject: IB/ipath: Avoid test_bit() on u64 SDMA status value Gabriel C pointed out that when the x86 bitops are updated to operate on unsigned long, the code in sdma_abort_task() will produce warnings: drivers/infiniband/hw/ipath/ipath_sdma.c: In function 'sdma_abort_task': drivers/infiniband/hw/ipath/ipath_sdma.c:267: warning: passing argument 2 of 'constant_test_bit' from incompatible pointer type and so on, because it uses test_bit() to operation on a u64 value (returned by ipath_read_kref64() for a hardware register). Fix up these warnings by converting the test_bit() operations to &ing with appropriate symbolic defines of the bits within the hardware register. This has the benign side-effect of making the code more self-documenting as well. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_kernel.h b/drivers/infiniband/hw/ipath/ipath_kernel.h index 59a8b25..0bd8bcb 100644 --- a/drivers/infiniband/hw/ipath/ipath_kernel.h +++ b/drivers/infiniband/hw/ipath/ipath_kernel.h @@ -232,6 +232,11 @@ struct ipath_sdma_desc { #define IPATH_SDMA_TXREQ_S_ABORTED 2 #define IPATH_SDMA_TXREQ_S_SHUTDOWN 3 +#define IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG (1ull << 63) +#define IPATH_SDMA_STATUS_ABORT_IN_PROG (1ull << 62) +#define IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE (1ull << 61) +#define IPATH_SDMA_STATUS_SCB_EMPTY (1ull << 30) + /* max dwords in small buffer packet */ #define IPATH_SMALLBUF_DWORDS (dd->ipath_piosize2k >> 2) diff --git a/drivers/infiniband/hw/ipath/ipath_sdma.c b/drivers/infiniband/hw/ipath/ipath_sdma.c index 0a8c1b8..eaba032 100644 --- a/drivers/infiniband/hw/ipath/ipath_sdma.c +++ b/drivers/infiniband/hw/ipath/ipath_sdma.c @@ -263,14 +263,10 @@ static void sdma_abort_task(unsigned long opaque) hwstatus = ipath_read_kreg64(dd, dd->ipath_kregs->kr_senddmastatus); - if (/* ScoreBoardDrainInProg */ - test_bit(63, &hwstatus) || - /* AbortInProg */ - test_bit(62, &hwstatus) || - /* InternalSDmaEnable */ - test_bit(61, &hwstatus) || - /* ScbEmpty */ - !test_bit(30, &hwstatus)) { + if ((hwstatus & (IPATH_SDMA_STATUS_SCORE_BOARD_DRAIN_IN_PROG | + IPATH_SDMA_STATUS_ABORT_IN_PROG | + IPATH_SDMA_STATUS_INTERNAL_SDMA_ENABLE)) || + !(hwstatus & IPATH_SDMA_STATUS_SCB_EMPTY)) { if (dd->ipath_sdma_reset_wait > 0) { /* not done shutting down sdma */ --dd->ipath_sdma_reset_wait; -- cgit v0.10.2 From 03031f71c7e64aada1add057ccc4a8bc6a79924c Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Mon, 26 May 2008 15:22:17 -0700 Subject: IB/ipath: Fix device capability flags The driver supports a few features (RNR NAK, port active event, SRQ resize) that were not reported in the device capability flags. This patch fixes that. Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_verbs.c b/drivers/infiniband/hw/ipath/ipath_verbs.c index e0ec540..7779165 100644 --- a/drivers/infiniband/hw/ipath/ipath_verbs.c +++ b/drivers/infiniband/hw/ipath/ipath_verbs.c @@ -1494,7 +1494,8 @@ static int ipath_query_device(struct ib_device *ibdev, props->device_cap_flags = IB_DEVICE_BAD_PKEY_CNTR | IB_DEVICE_BAD_QKEY_CNTR | IB_DEVICE_SHUTDOWN_PORT | - IB_DEVICE_SYS_IMAGE_GUID; + IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_RC_RNR_NAK_GEN | + IB_DEVICE_PORT_ACTIVE_EVENT | IB_DEVICE_SRQ_RESIZE; props->page_size_cap = PAGE_SIZE; props->vendor_id = dev->dd->ipath_vendorid; props->vendor_part_id = dev->dd->ipath_deviceid; -- cgit v0.10.2 From 5f6256066790e1a9a90438f5eece73069c531ffc Mon Sep 17 00:00:00 2001 From: Chien Tung Date: Mon, 26 May 2008 15:23:32 -0700 Subject: MAINTAINERS: Update NetEffect (iw_nes) entry Add Chien and remove Nishi from maintainers list for NetEffect. Signed-off-by: Chien Tung Signed-off-by: Roland Dreier diff --git a/MAINTAINERS b/MAINTAINERS index 0a6d2ca..bd3badb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2866,8 +2866,8 @@ S: Maintained NETEFFECT IWARP RNIC DRIVER (IW_NES) P: Faisal Latif M: flatif@neteffect.com -P: Nishi Gupta -M: ngupta@neteffect.com +P: Chien Tung +M: ctung@neteffect.com P: Glenn Streiff M: gstreiff@neteffect.com L: general@lists.openfabrics.org -- cgit v0.10.2 From d35895db7aadc24086b6002101154eec478e9dd6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bruno=20Pr=C3=A9mont?= Date: Tue, 27 May 2008 01:36:04 -0400 Subject: Input: i8042 - make sure Dritek quirk is invoked at resume MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Also do not fail i8042 entire initialization if enabling dritek extension fails. Signed-off-by: Bruno PrĂ©mont Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 65a74cf..592ff55 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -885,6 +885,20 @@ static long i8042_panic_blink(long count) #undef DELAY +#ifdef CONFIG_X86 +static void i8042_dritek_enable(void) +{ + char param = 0x90; + int error; + + error = i8042_command(¶m, 0x1059); + if (error) + printk(KERN_WARNING + "Failed to enable DRITEK extension: %d\n", + error); +} +#endif + #ifdef CONFIG_PM /* * Here we try to restore the original BIOS settings. We only want to @@ -942,6 +956,12 @@ static int i8042_resume(struct platform_device *dev) return -EIO; } + +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + if (i8042_mux_present) { if (i8042_set_mux_mode(1, NULL) || i8042_enable_mux_ports()) printk(KERN_WARNING @@ -1160,6 +1180,11 @@ static int __devinit i8042_probe(struct platform_device *dev) if (error) return error; +#ifdef CONFIG_X86 + if (i8042_dritek) + i8042_dritek_enable(); +#endif + if (!i8042_noaux) { error = i8042_setup_aux(); if (error && error != -ENODEV && error != -EBUSY) @@ -1171,14 +1196,6 @@ static int __devinit i8042_probe(struct platform_device *dev) if (error) goto out_fail; } -#ifdef CONFIG_X86 - if (i8042_dritek) { - char param = 0x90; - error = i8042_command(¶m, 0x1059); - if (error) - goto out_fail; - } -#endif /* * Ok, everything is ready, let's register all serio ports */ -- cgit v0.10.2 From 6b32ca39d70f5d92f4d450dc54966f20e8b5c1f6 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:36:47 -0400 Subject: Input: wm97xx-core - report a phys for WM97xx touchscreens phys is displayed in diagnostic output like that from evbug so ensure that it is set to something. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index e9c7ea4..ba6fb28 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -616,6 +616,7 @@ static int wm97xx_probe(struct device *dev) /* set up touch configuration */ wm->input_dev->name = "wm97xx touchscreen"; + wm->input_dev->phys = "wm97xx"; wm->input_dev->open = wm97xx_ts_input_open; wm->input_dev->close = wm97xx_ts_input_close; set_bit(EV_ABS, wm->input_dev->evbit); -- cgit v0.10.2 From ef9db4929a4d9559abf1812fd89cc3b09c56b49b Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:37:08 -0400 Subject: Input: wm97xx-core - fix driver name Fix driver name - thanks to Guennadi Liakhovetski for reporting this. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index ba6fb28..8a00918 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -802,7 +802,7 @@ void wm97xx_unregister_mach_ops(struct wm97xx *wm) EXPORT_SYMBOL_GPL(wm97xx_unregister_mach_ops); static struct device_driver wm97xx_driver = { - .name = "ac97", + .name = "wm97xx-ts", .bus = &ac97_bus_type, .owner = THIS_MODULE, .probe = wm97xx_probe, -- cgit v0.10.2 From 5de4cd431db749bdca58ec88862462729f6159b2 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:37:19 -0400 Subject: Input: wm97xx-core - fix race on PHY init The chip phy_init() function must be called before the dig_enable() function but dig_enable() is called when the device is opened and we only call phy_init() after having reigstered the device, meaning the two can race. Fix this by doing the phy_init() before we register the input device. Thanks to Rodolfo Giometti for the report. Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wm97xx-core.c b/drivers/input/touchscreen/wm97xx-core.c index 8a00918..cdc24ad 100644 --- a/drivers/input/touchscreen/wm97xx-core.c +++ b/drivers/input/touchscreen/wm97xx-core.c @@ -608,6 +608,17 @@ static int wm97xx_probe(struct device *dev) goto alloc_err; } + /* set up physical characteristics */ + wm->codec->phy_init(wm); + + /* load gpio cache */ + wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); + wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); + wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); + wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); + wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); + wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); + wm->input_dev = input_allocate_device(); if (wm->input_dev == NULL) { ret = -ENOMEM; @@ -635,17 +646,6 @@ static int wm97xx_probe(struct device *dev) if (ret < 0) goto dev_alloc_err; - /* set up physical characteristics */ - wm->codec->phy_init(wm); - - /* load gpio cache */ - wm->gpio[0] = wm97xx_reg_read(wm, AC97_GPIO_CFG); - wm->gpio[1] = wm97xx_reg_read(wm, AC97_GPIO_POLARITY); - wm->gpio[2] = wm97xx_reg_read(wm, AC97_GPIO_STICKY); - wm->gpio[3] = wm97xx_reg_read(wm, AC97_GPIO_WAKEUP); - wm->gpio[4] = wm97xx_reg_read(wm, AC97_GPIO_STATUS); - wm->gpio[5] = wm97xx_reg_read(wm, AC97_MISC_AFE); - /* register our battery device */ wm->battery_dev = platform_device_alloc("wm97xx-battery", -1); if (!wm->battery_dev) { -- cgit v0.10.2 From 43f83a8f9963a11a9c3f41beecc363da21ae3602 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 27 May 2008 01:37:26 -0400 Subject: Input: wm9713 - support five wire panels Signed-off-by: Mark Brown Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/touchscreen/wm9713.c b/drivers/input/touchscreen/wm9713.c index 01278bd..8384587 100644 --- a/drivers/input/touchscreen/wm9713.c +++ b/drivers/input/touchscreen/wm9713.c @@ -85,6 +85,15 @@ module_param(delay, int, 0); MODULE_PARM_DESC(delay, "Set adc sample delay."); /* + * Set five_wire = 1 to use a 5 wire touchscreen. + * + * NOTE: Five wire mode does not allow for readback of pressure. + */ +static int five_wire; +module_param(five_wire, int, 0); +MODULE_PARM_DESC(five_wire, "Set to '1' to use 5-wire touchscreen."); + +/* * Set adc mask function. * * Sources of glitch noise, such as signals driving an LCD display, may feed @@ -162,6 +171,19 @@ static void wm9713_phy_init(struct wm97xx *wm) 64000 / rpu); } + /* Five wire panel? */ + if (five_wire) { + dig3 |= WM9713_45W; + dev_info(wm->dev, "setting 5-wire touchscreen mode."); + + if (pil) { + dev_warn(wm->dev, + "Pressure measurement not supported in 5 " + "wire mode, disabling\n"); + pil = 0; + } + } + /* touchpanel pressure */ if (pil == 2) { dig3 |= WM9712_PIL; diff --git a/include/linux/wm97xx.h b/include/linux/wm97xx.h index 4d13732..6f69968 100644 --- a/include/linux/wm97xx.h +++ b/include/linux/wm97xx.h @@ -100,6 +100,7 @@ #define WM9713_ADCSEL_Y 0x0004 /* Y measurement */ #define WM9713_ADCSEL_PRES 0x0008 /* Pressure measurement */ #define WM9713_COO 0x0001 /* enable coordinate mode */ +#define WM9713_45W 0x1000 /* set for 5 wire panel */ #define WM9713_PDEN 0x0800 /* measure only when pen down */ #define WM9713_ADCSEL_MASK 0x00fe /* ADC selection mask */ #define WM9713_WAIT 0x0200 /* coordinate wait */ -- cgit v0.10.2 From 87a54a28970fb6a91de3993120eccc01a0ece732 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Tue, 27 May 2008 01:38:45 -0400 Subject: Input: apanel - remove duplicate include Remove duplicate include file . Signed-off-by: Huang Weiyi Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/apanel.c b/drivers/input/misc/apanel.c index 9531d8c..d82f7f7 100644 --- a/drivers/input/misc/apanel.c +++ b/drivers/input/misc/apanel.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From f04d264afc51acdffeba9cdf3baf04116687680c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Tue, 27 May 2008 09:37:42 +0200 Subject: avr32: Fix cpufreq oops when ondemand governor is default Move the AP7 cpufreq init to late_initcall() so that we don't try to bring up cpufreq until the governor is ready. x86 also uses late_initcall() for this. Signed-off-by: Haavard Skinnemoen diff --git a/arch/avr32/mach-at32ap/cpufreq.c b/arch/avr32/mach-at32ap/cpufreq.c index 235524b..5dd8d25 100644 --- a/arch/avr32/mach-at32ap/cpufreq.c +++ b/arch/avr32/mach-at32ap/cpufreq.c @@ -108,5 +108,4 @@ static int __init at32_cpufreq_init(void) { return cpufreq_register_driver(&at32_driver); } - -arch_initcall(at32_cpufreq_init); +late_initcall(at32_cpufreq_init); -- cgit v0.10.2 From 6079a463cf95fafcc704a4e5e92a4da12444bd3c Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Tue, 27 May 2008 06:22:38 -0700 Subject: dccp: Fix to handle short sequence numbers packet correctly RFC4340 said: 8.5. Pseudocode ... If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet has short sequence numbers), drop packet and return But DCCP has some mistake to handle short sequence numbers packet, now it drop packet only if P.type is Data, Ack, or DataAck and P.X == 0. Signed-off-by: Wei Yongjun Acked-by: Gerrit Renker Acked-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index b348dd7..c22a378 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -739,8 +739,8 @@ int dccp_invalid_packet(struct sk_buff *skb) * If P.type is not Data, Ack, or DataAck and P.X == 0 (the packet * has short sequence numbers), drop packet and return */ - if (dh->dccph_type >= DCCP_PKT_DATA && - dh->dccph_type <= DCCP_PKT_DATAACK && dh->dccph_x == 0) { + if ((dh->dccph_type < DCCP_PKT_DATA || + dh->dccph_type > DCCP_PKT_DATAACK) && dh->dccph_x == 0) { DCCP_WARN("P.type (%s) not Data || [Data]Ack, while P.X == 0\n", dccp_packet_name(dh->dccph_type)); return 1; -- cgit v0.10.2 From 825de27d9e40b3117b29a79d412b7a4b78c5d815 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Tue, 27 May 2008 06:33:54 -0700 Subject: dccp ccid-3: Fix "t_ipi explosion" bug The identification of this bug is thanks to Cheng Wei and Tomasz Grobelny. To avoid divide-by-zero, the implementation previously ignored RTTs smaller than 4 microseconds when performing integer division RTT/4. When the RTT reached a value less than 4 microseconds (as observed on loopback), this prevented the Window Counter CCVal value from advancing. As a result, the receiver stopped sending feedback. This in turn caused non-ending expiries of the nofeedback timer at the sender, so that the sending rate was progressively reduced until reaching the minimum of one packet per 64 seconds. The patch fixes this bug by handling integer division more intelligently. Due to consistent use of dccp_sample_rtt(), divide-by-zero-RTT is avoided. Signed-off-by: Gerrit Renker Signed-off-by: David S. Miller diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index cd61dea..f813077 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -193,22 +193,17 @@ static inline void ccid3_hc_tx_update_s(struct ccid3_hc_tx_sock *hctx, int len) /* * Update Window Counter using the algorithm from [RFC 4342, 8.1]. - * The algorithm is not applicable if RTT < 4 microseconds. + * As elsewhere, RTT > 0 is assumed by using dccp_sample_rtt(). */ static inline void ccid3_hc_tx_update_win_count(struct ccid3_hc_tx_sock *hctx, ktime_t now) { - u32 quarter_rtts; - - if (unlikely(hctx->ccid3hctx_rtt < 4)) /* avoid divide-by-zero */ - return; - - quarter_rtts = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count); - quarter_rtts /= hctx->ccid3hctx_rtt / 4; + u32 delta = ktime_us_delta(now, hctx->ccid3hctx_t_last_win_count), + quarter_rtts = (4 * delta) / hctx->ccid3hctx_rtt; if (quarter_rtts > 0) { hctx->ccid3hctx_t_last_win_count = now; - hctx->ccid3hctx_last_win_count += min_t(u32, quarter_rtts, 5); + hctx->ccid3hctx_last_win_count += min(quarter_rtts, 5U); hctx->ccid3hctx_last_win_count &= 0xF; /* mod 16 */ } } -- cgit v0.10.2 From edb2301f2903e96beadc333f9584222c05858518 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Tue, 27 May 2008 06:31:43 +0100 Subject: ck804rom: fix driver_data in probe table. There's a reason why using C99 initialisers even in the supposedly trivial structs is a good idea. Signed-off-by: Carl-Daniel Hailfinger Signed-off-by: David Woodhouse Signed-off-by: Linus Torvalds diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 59d8fb4..effaf7c 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -331,15 +331,15 @@ static void __devexit ck804xrom_remove_one (struct pci_dev *pdev) } static struct pci_device_id ck804xrom_pci_tbl[] = { - { PCI_VENDOR_ID_NVIDIA, 0x0051, PCI_ANY_ID, PCI_ANY_ID, DEV_CK804 }, - { PCI_VENDOR_ID_NVIDIA, 0x0360, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0361, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0362, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0363, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0364, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0365, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0366, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, - { PCI_VENDOR_ID_NVIDIA, 0x0367, PCI_ANY_ID, PCI_ANY_ID, DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0051), .driver_data = DEV_CK804 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0360), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0361), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0362), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0363), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0364), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0365), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0366), .driver_data = DEV_MCP55 }, + { PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, 0x0367), .driver_data = DEV_MCP55 }, { 0, } }; -- cgit v0.10.2 From 7ba2db5f38955907e46a65c9334d287cd3da32c2 Mon Sep 17 00:00:00 2001 From: Michael Reed Date: Thu, 13 Mar 2008 14:53:56 -0500 Subject: [SCSI] fusion mpt: fix target missing after resetting external raid Following a hard reset of a SAS raid, one of the raid targets is occasionally missing. I tracked this down to a pretty obscure little bug. The LSI fusion drivers for SAS and Fibre Channel both use their respective transport layers. Those transport layers increment the target number assigned to new targets. The routine __scsi_scan_target uses the "this_id" element of the Scsi_Host structure to avoid scanning the scsi host adapter. Both fusion drivers set "this_id" from a value returned in a firmware PortFacts response. For my particular test case (SAS) the firmware id assigned to the initiator was 173. After enough raid resets to cause the raid targets to go and come a sufficient number of times, the id assigned by the transport to a raid target would match the id assigned by the host adapter to the "this_id" field, resulting in that target not being scanned. Fix by not assigning this_id and not checking it in slave_configure. Signed-off-by: Michael Reed Acked-by: "Moore, Eric" Signed-off-by: James Bottomley diff --git a/drivers/message/fusion/mptfc.c b/drivers/message/fusion/mptfc.c index 3cdd4e9..1e24ab4 100644 --- a/drivers/message/fusion/mptfc.c +++ b/drivers/message/fusion/mptfc.c @@ -1238,8 +1238,6 @@ mptfc_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->max_id = ioc->pfacts->MaxDevices; sh->max_lun = max_lun; - sh->this_id = ioc->pfacts[0].PortSCSIID; - /* Required entry. */ sh->unique_id = ioc->id; diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c index 4684807..4d492ba 100644 --- a/drivers/message/fusion/mptsas.c +++ b/drivers/message/fusion/mptsas.c @@ -3193,8 +3193,6 @@ mptsas_probe(struct pci_dev *pdev, const struct pci_device_id *id) sh->transportt = mptsas_transport_template; - sh->this_id = ioc->pfacts[0].PortSCSIID; - /* Required entry. */ sh->unique_id = ioc->id; diff --git a/drivers/message/fusion/mptscsih.c b/drivers/message/fusion/mptscsih.c index b109bd8..c68ef00 100644 --- a/drivers/message/fusion/mptscsih.c +++ b/drivers/message/fusion/mptscsih.c @@ -2451,12 +2451,6 @@ mptscsih_slave_configure(struct scsi_device *sdev) ioc->name, sdev->sdtr, sdev->wdtr, sdev->ppr, sdev->inquiry_len)); - if (sdev->id > sh->max_id) { - /* error case, should never happen */ - scsi_adjust_queue_depth(sdev, 0, 1); - goto slave_configure_exit; - } - vdevice->configured_lun = 1; mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH); @@ -2470,8 +2464,6 @@ mptscsih_slave_configure(struct scsi_device *sdev) ioc->name, vtarget->negoFlags, vtarget->maxOffset, vtarget->minSyncFactor)); -slave_configure_exit: - dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "tagged %d, simple %d, ordered %d\n", ioc->name,sdev->tagged_supported, sdev->simple_tags, -- cgit v0.10.2 From ca61668b82a902143997794aae3f681a602e6ebc Mon Sep 17 00:00:00 2001 From: Brian King Date: Mon, 19 May 2008 10:27:56 -0500 Subject: [SCSI] ibmvscsi: Non SCSI error status fixup Some versions of the Virtual I/O Server on Power return 0x99 in the non-SCSI error status field as success, rather than 0. This fixes the ibmvscsi driver to treat this response as success. Signed-off-by: Brian King Signed-off-by: James Bottomley diff --git a/drivers/scsi/ibmvscsi/ibmvscsi.c b/drivers/scsi/ibmvscsi/ibmvscsi.c index ccfd8ac..5d23368 100644 --- a/drivers/scsi/ibmvscsi/ibmvscsi.c +++ b/drivers/scsi/ibmvscsi/ibmvscsi.c @@ -1348,7 +1348,7 @@ void ibmvscsi_handle_crq(struct viosrp_crq *crq, del_timer(&evt_struct->timer); - if (crq->status != VIOSRP_OK && evt_struct->cmnd) + if ((crq->status != VIOSRP_OK && crq->status != VIOSRP_OK2) && evt_struct->cmnd) evt_struct->cmnd->result = DID_ERROR << 16; if (evt_struct->done) evt_struct->done(evt_struct); diff --git a/drivers/scsi/ibmvscsi/viosrp.h b/drivers/scsi/ibmvscsi/viosrp.h index 4c4aadb..2046045 100644 --- a/drivers/scsi/ibmvscsi/viosrp.h +++ b/drivers/scsi/ibmvscsi/viosrp.h @@ -65,7 +65,8 @@ enum viosrp_crq_status { VIOSRP_VIOLATES_MAX_XFER = 0x2, VIOSRP_PARTNER_PANIC = 0x3, VIOSRP_DEVICE_BUSY = 0x8, - VIOSRP_ADAPTER_FAIL = 0x10 + VIOSRP_ADAPTER_FAIL = 0x10, + VIOSRP_OK2 = 0x99, }; struct viosrp_crq { -- cgit v0.10.2 From cc94bc37d5e02aaf8a6409a28e3c62bbd479b9a8 Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Mon, 19 May 2008 14:58:43 -0700 Subject: LSM: remove stale web site from MAINTAINERS Pointed out by Adrian Bunk. Signed-off-by: Chris Wright diff --git a/MAINTAINERS b/MAINTAINERS index 0a6d2ca..2852a02 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2565,7 +2565,6 @@ LINUX SECURITY MODULE (LSM) FRAMEWORK P: Chris Wright M: chrisw@sous-sol.org L: linux-security-module@vger.kernel.org -W: http://lsm.immunix.org T: git kernel.org:/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git S: Supported -- cgit v0.10.2 From 4dcc29e1574d88f4465ba865ed82800032f76418 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Tue, 27 May 2008 13:23:16 -0700 Subject: [IA64] Workaround for RSE issue Problem: An application violating the architectural rules regarding operation dependencies and having specific Register Stack Engine (RSE) state at the time of the violation, may result in an illegal operation fault and invalid RSE state. Such faults may initiate a cascade of repeated illegal operation faults within OS interruption handlers. The specific behavior is OS dependent. Implication: An application causing an illegal operation fault with specific RSE state may result in a series of illegal operation faults and an eventual OS stack overflow condition. Workaround: OS interruption handlers that switch to kernel backing store implement a check for invalid RSE state to avoid the series of illegal operation faults. The core of the workaround is the RSE_WORKAROUND code sequence inserted into each invocation of the SAVE_MIN_WITH_COVER and SAVE_MIN_WITH_COVER_R19 macros. This sequence includes hard-coded constants that depend on the number of stacked physical registers being 96. The rest of this patch consists of code to disable this workaround should this not be the case (with the presumption that if a future Itanium processor increases the number of registers, it would also remove the need for this patch). Move the start of the RBS up to a mod32 boundary to avoid some corner cases. The dispatch_illegal_op_fault code outgrew the spot it was squatting in when built with this patch and CONFIG_VIRT_CPU_ACCOUNTING=y Move it out to the end of the ivt. Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/ivt.S b/arch/ia64/kernel/ivt.S index 6678c49..80b44ea 100644 --- a/arch/ia64/kernel/ivt.S +++ b/arch/ia64/kernel/ivt.S @@ -1076,48 +1076,6 @@ END(ia64_syscall_setup) DBG_FAULT(15) FAULT(15) - /* - * Squatting in this space ... - * - * This special case dispatcher for illegal operation faults allows preserved - * registers to be modified through a callback function (asm only) that is handed - * back from the fault handler in r8. Up to three arguments can be passed to the - * callback function by returning an aggregate with the callback as its first - * element, followed by the arguments. - */ -ENTRY(dispatch_illegal_op_fault) - .prologue - .body - SAVE_MIN_WITH_COVER - ssm psr.ic | PSR_DEFAULT_BITS - ;; - srlz.i // guarantee that interruption collection is on - ;; -(p15) ssm psr.i // restore psr.i - adds r3=8,r2 // set up second base pointer for SAVE_REST - ;; - alloc r14=ar.pfs,0,0,1,0 // must be first in insn group - mov out0=ar.ec - ;; - SAVE_REST - PT_REGS_UNWIND_INFO(0) - ;; - br.call.sptk.many rp=ia64_illegal_op_fault -.ret0: ;; - alloc r14=ar.pfs,0,0,3,0 // must be first in insn group - mov out0=r9 - mov out1=r10 - mov out2=r11 - movl r15=ia64_leave_kernel - ;; - mov rp=r15 - mov b6=r8 - ;; - cmp.ne p6,p0=0,r8 -(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel - br.sptk.many ia64_leave_kernel -END(dispatch_illegal_op_fault) - .org ia64_ivt+0x4000 ///////////////////////////////////////////////////////////////////////////////////////// // 0x4000 Entry 16 (size 64 bundles) Reserved @@ -1715,6 +1673,48 @@ END(ia32_interrupt) DBG_FAULT(67) FAULT(67) + /* + * Squatting in this space ... + * + * This special case dispatcher for illegal operation faults allows preserved + * registers to be modified through a callback function (asm only) that is handed + * back from the fault handler in r8. Up to three arguments can be passed to the + * callback function by returning an aggregate with the callback as its first + * element, followed by the arguments. + */ +ENTRY(dispatch_illegal_op_fault) + .prologue + .body + SAVE_MIN_WITH_COVER + ssm psr.ic | PSR_DEFAULT_BITS + ;; + srlz.i // guarantee that interruption collection is on + ;; +(p15) ssm psr.i // restore psr.i + adds r3=8,r2 // set up second base pointer for SAVE_REST + ;; + alloc r14=ar.pfs,0,0,1,0 // must be first in insn group + mov out0=ar.ec + ;; + SAVE_REST + PT_REGS_UNWIND_INFO(0) + ;; + br.call.sptk.many rp=ia64_illegal_op_fault +.ret0: ;; + alloc r14=ar.pfs,0,0,3,0 // must be first in insn group + mov out0=r9 + mov out1=r10 + mov out2=r11 + movl r15=ia64_leave_kernel + ;; + mov rp=r15 + mov b6=r8 + ;; + cmp.ne p6,p0=0,r8 +(p6) br.call.dpnt.many b6=b6 // call returns to ia64_leave_kernel + br.sptk.many ia64_leave_kernel +END(dispatch_illegal_op_fault) + #ifdef CONFIG_IA32_SUPPORT /* diff --git a/arch/ia64/kernel/minstate.h b/arch/ia64/kernel/minstate.h index 7c548ac..74b6d67 100644 --- a/arch/ia64/kernel/minstate.h +++ b/arch/ia64/kernel/minstate.h @@ -15,6 +15,9 @@ #define ACCOUNT_SYS_ENTER #endif +.section ".data.patch.rse", "a" +.previous + /* * DO_SAVE_MIN switches to the kernel stacks (if necessary) and saves * the minimum state necessary that allows us to turn psr.ic back @@ -40,7 +43,7 @@ * Note that psr.ic is NOT turned on by this macro. This is so that * we can pass interruption state as arguments to a handler. */ -#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA) \ +#define DO_SAVE_MIN(COVER,SAVE_IFS,EXTRA,WORKAROUND) \ mov r16=IA64_KR(CURRENT); /* M */ \ mov r27=ar.rsc; /* M */ \ mov r20=r1; /* A */ \ @@ -87,6 +90,7 @@ tbit.nz p15,p0=r29,IA64_PSR_I_BIT; \ mov r29=b0 \ ;; \ + WORKAROUND; \ adds r16=PT(R8),r1; /* initialize first base pointer */ \ adds r17=PT(R9),r1; /* initialize second base pointer */ \ (pKStk) mov r18=r0; /* make sure r18 isn't NaT */ \ @@ -206,6 +210,40 @@ st8 [r25]=r10; /* ar.ssd */ \ ;; -#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs,) -#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19) -#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, ) +#define RSE_WORKAROUND \ +(pUStk) extr.u r17=r18,3,6; \ +(pUStk) sub r16=r18,r22; \ +[1:](pKStk) br.cond.sptk.many 1f; \ + .xdata4 ".data.patch.rse",1b-. \ + ;; \ + cmp.ge p6,p7 = 33,r17; \ + ;; \ +(p6) mov r17=0x310; \ +(p7) mov r17=0x308; \ + ;; \ + cmp.leu p1,p0=r16,r17; \ +(p1) br.cond.sptk.many 1f; \ + dep.z r17=r26,0,62; \ + movl r16=2f; \ + ;; \ + mov ar.pfs=r17; \ + dep r27=r0,r27,16,14; \ + mov b0=r16; \ + ;; \ + br.ret.sptk b0; \ + ;; \ +2: \ + mov ar.rsc=r0 \ + ;; \ + flushrs; \ + ;; \ + mov ar.bspstore=r22 \ + ;; \ + mov r18=ar.bsp; \ + ;; \ +1: \ + .pred.rel "mutex", pKStk, pUStk + +#define SAVE_MIN_WITH_COVER DO_SAVE_MIN(cover, mov r30=cr.ifs, , RSE_WORKAROUND) +#define SAVE_MIN_WITH_COVER_R19 DO_SAVE_MIN(cover, mov r30=cr.ifs, mov r15=r19, RSE_WORKAROUND) +#define SAVE_MIN DO_SAVE_MIN( , mov r30=r0, , ) diff --git a/arch/ia64/kernel/patch.c b/arch/ia64/kernel/patch.c index e0dca87..b83b2c5 100644 --- a/arch/ia64/kernel/patch.c +++ b/arch/ia64/kernel/patch.c @@ -115,6 +115,29 @@ ia64_patch_vtop (unsigned long start, unsigned long end) ia64_srlz_i(); } +/* + * Disable the RSE workaround by turning the conditional branch + * that we tagged in each place the workaround was used into an + * unconditional branch. + */ +void __init +ia64_patch_rse (unsigned long start, unsigned long end) +{ + s32 *offp = (s32 *) start; + u64 ip, *b; + + while (offp < (s32 *) end) { + ip = (u64) offp + *offp; + + b = (u64 *)(ip & -16); + b[1] &= ~0xf800000L; + ia64_fc((void *) ip); + ++offp; + } + ia64_sync_i(); + ia64_srlz_i(); +} + void __init ia64_patch_mckinley_e9 (unsigned long start, unsigned long end) { diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index e9596cd..f48a809 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -560,6 +560,17 @@ setup_arch (char **cmdline_p) /* process SAL system table: */ ia64_sal_init(__va(efi.sal_systab)); +#ifdef CONFIG_ITANIUM + ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist); +#else + { + u64 num_phys_stacked; + + if (ia64_pal_rse_info(&num_phys_stacked, 0) == 0 && num_phys_stacked > 96) + ia64_patch_rse((u64) __start___rse_patchlist, (u64) __end___rse_patchlist); + } +#endif + #ifdef CONFIG_SMP cpu_physical_id(0) = hard_smp_processor_id(); #endif diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 80622ac..5929ab1 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -156,6 +156,13 @@ SECTIONS __end___vtop_patchlist = .; } + .data.patch.rse : AT(ADDR(.data.patch.rse) - LOAD_OFFSET) + { + __start___rse_patchlist = .; + *(.data.patch.rse) + __end___rse_patchlist = .; + } + .data.patch.mckinley_e9 : AT(ADDR(.data.patch.mckinley_e9) - LOAD_OFFSET) { __start___mckinley_e9_bundles = .; diff --git a/include/asm-ia64/patch.h b/include/asm-ia64/patch.h index a715430..295fe6a 100644 --- a/include/asm-ia64/patch.h +++ b/include/asm-ia64/patch.h @@ -21,6 +21,7 @@ extern void ia64_patch_imm60 (u64 insn_addr, u64 val); /* patch "brl" w/ip-rel extern void ia64_patch_mckinley_e9 (unsigned long start, unsigned long end); extern void ia64_patch_vtop (unsigned long start, unsigned long end); extern void ia64_patch_phys_stack_reg(unsigned long val); +extern void ia64_patch_rse (unsigned long start, unsigned long end); extern void ia64_patch_gate (void); #endif /* _ASM_IA64_PATCH_H */ diff --git a/include/asm-ia64/ptrace.h b/include/asm-ia64/ptrace.h index 4b2a8d4..15f8dcf 100644 --- a/include/asm-ia64/ptrace.h +++ b/include/asm-ia64/ptrace.h @@ -76,7 +76,7 @@ # define KERNEL_STACK_SIZE_ORDER 0 #endif -#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 15) & ~15) +#define IA64_RBS_OFFSET ((IA64_TASK_SIZE + IA64_THREAD_INFO_SIZE + 31) & ~31) #define IA64_STK_OFFSET ((1 << KERNEL_STACK_SIZE_ORDER)*PAGE_SIZE) #define KERNEL_STACK_SIZE IA64_STK_OFFSET diff --git a/include/asm-ia64/sections.h b/include/asm-ia64/sections.h index dc42a35..7286e4a 100644 --- a/include/asm-ia64/sections.h +++ b/include/asm-ia64/sections.h @@ -10,6 +10,7 @@ extern char __per_cpu_start[], __per_cpu_end[], __phys_per_cpu_start[]; extern char __start___vtop_patchlist[], __end___vtop_patchlist[]; +extern char __start___rse_patchlist[], __end___rse_patchlist[]; extern char __start___mckinley_e9_bundles[], __end___mckinley_e9_bundles[]; extern char __start___phys_stack_reg_patchlist[], __end___phys_stack_reg_patchlist[]; extern char __start_gate_section[]; -- cgit v0.10.2 From c433a1b6426880d3e23267938c3542706f3d03a6 Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 27 May 2008 16:07:26 -0500 Subject: electra_cf: Add MODULE_DEVICE_TABLE() Add a module device table to electra_cf so that modules can be auto-probed/loaded. Signed-off-by: Olof Johansson diff --git a/drivers/pcmcia/electra_cf.c b/drivers/pcmcia/electra_cf.c index 0a6cea1..52d0aa8 100644 --- a/drivers/pcmcia/electra_cf.c +++ b/drivers/pcmcia/electra_cf.c @@ -352,6 +352,7 @@ static struct of_device_id electra_cf_match[] = { }, {}, }; +MODULE_DEVICE_TABLE(of, electra_cf_match); static struct of_platform_driver electra_cf_driver = { .name = (char *)driver_name, -- cgit v0.10.2 From 732bee4c859012edf05f3e09b53b68fc332a369d Mon Sep 17 00:00:00 2001 From: Olof Johansson Date: Tue, 27 May 2008 16:11:13 -0500 Subject: [POWERPC] pasemi: update pasemi_defconfig, enable electra_cf Refresh pasemi_defconfig and enable ELECTRA_CF=y. Signed-off-by: Olof Johansson diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 09f3062..199e5f5 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Tue Mar 25 10:25:48 2008 +# Linux kernel version: 2.6.26-rc3 +# Tue May 27 16:08:06 2008 # CONFIG_PPC64=y @@ -29,6 +29,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y CONFIG_HAVE_SETUP_PER_CPU_AREA=y CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_ARCH_HAS_ILOG2_U64=y @@ -87,6 +90,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -115,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -167,11 +173,11 @@ CONFIG_PPC_PASEMI=y CONFIG_PPC_PASEMI_IOMMU=y # CONFIG_PPC_PASEMI_IOMMU_DMA_FORCE is not set CONFIG_PPC_PASEMI_MDIO=y -# CONFIG_PPC_CELLEB is not set # CONFIG_PPC_PS3 is not set # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PPC_IBM_CELL_BLADE is not set +# CONFIG_PPC_CELLEB is not set # CONFIG_PQ2ADS is not set CONFIG_PPC_NATIVE=y # CONFIG_IPIC is not set @@ -192,6 +198,7 @@ CONFIG_CPU_FREQ_DEBUG=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set @@ -226,7 +233,6 @@ CONFIG_PREEMPT_NONE=y CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_HUGETLB_PAGE_SIZE_VARIABLE=y CONFIG_IOMMU_VMERGE=y CONFIG_IOMMU_HELPER=y @@ -249,12 +255,14 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_PPC_HAS_HASH_64K=y CONFIG_PPC_64K_PAGES=y +CONFIG_FORCE_MAX_ZONEORDER=9 # CONFIG_PPC_SUBPAGE_PROT is not set # CONFIG_SCHED_SMT is not set CONFIG_PROC_DEVICETREE=y @@ -290,9 +298,12 @@ CONFIG_CARDBUS=y # CONFIG_YENTA is not set # CONFIG_PD6729 is not set # CONFIG_I82092 is not set -# CONFIG_ELECTRA_CF is not set +CONFIG_ELECTRA_CF=y # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set +CONFIG_PAGE_OFFSET=0xc000000000000000 CONFIG_KERNEL_START=0xc000000000000000 +CONFIG_PHYSICAL_START=0x00000000 # # Networking @@ -341,8 +352,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -473,6 +482,7 @@ CONFIG_MTD_NAND_PASEMI=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,7 +530,6 @@ CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -# CONFIG_IDE_GENERIC is not set # CONFIG_BLK_DEV_PLATFORM is not set # @@ -554,7 +563,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -632,7 +641,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +CONFIG_SATA_SIL24=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -642,7 +654,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -CONFIG_SATA_SIL24=y # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -689,6 +700,7 @@ CONFIG_PATA_PCMCIA=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -791,7 +803,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set CONFIG_TIGON3=y # CONFIG_BNX2 is not set @@ -810,6 +821,7 @@ CONFIG_PASEMI_MAC=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -817,6 +829,7 @@ CONFIG_PASEMI_MAC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -890,6 +903,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -917,7 +931,6 @@ CONFIG_LEGACY_PTY_COUNT=4 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_PASEMI=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set @@ -936,13 +949,7 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y - -# -# I2C Algorithms -# CONFIG_I2C_ALGOBIT=y -CONFIG_I2C_ALGOPCF=y -CONFIG_I2C_ALGOPCA=y # # I2C Hardware Bus support @@ -971,6 +978,7 @@ CONFIG_I2C_PASEMI=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -980,19 +988,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -1062,12 +1064,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1094,8 +1106,8 @@ CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set -CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set CONFIG_FB_MACMODES=y CONFIG_FB_BACKLIGHT=y @@ -1213,6 +1225,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1292,11 +1305,11 @@ CONFIG_SND_USB_USX2Y=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1334,11 +1347,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -1354,6 +1369,7 @@ CONFIG_USB_SL811_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1375,6 +1391,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set CONFIG_USB_LIBUSUAL=y # @@ -1416,6 +1433,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_EDAC=y @@ -1475,10 +1493,6 @@ CONFIG_RTC_DRV_DS1307=y # on-CPU RTC drivers # # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1576,12 +1590,10 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set CONFIG_NFSD_V4=y -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1665,9 +1677,10 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1677,6 +1690,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1684,6 +1698,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1694,18 +1709,23 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1735,53 +1755,83 @@ CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=y +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=y -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# CONFIG_CRYPTO_AES=y +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_BLOWFISH=y +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -CONFIG_CRYPTO_AUTHENC=y # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From b3bd307c628af2f0a581c42d5d7e4bcdbbf64b6a Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:08:23 +0900 Subject: shpchp: add message about shpchp_slot_with_bus option Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The shpchp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/shpchp_core.c b/drivers/pci/hotplug/shpchp_core.c index 1648076..9784865 100644 --- a/drivers/pci/hotplug/shpchp_core.c +++ b/drivers/pci/hotplug/shpchp_core.c @@ -162,6 +162,10 @@ static int init_slots(struct controller *ctrl) retval = pci_hp_register(slot->hotplug_slot); if (retval) { err("pci_hp_register failed with error %d\n", retval); + if (retval == -EEXIST) + err("Failed to register slot because of name " + "collision. Try \'shpchp_slot_with_bus\' " + "module option.\n"); goto error_info; } -- cgit v0.10.2 From dbd79aed1aea2bece0bf43cc2ff3b2f9baf48a08 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:03:16 +0900 Subject: pciehp: fix NULL dereference in interrupt handler Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[] [] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [] pcie_isr+0x18e/0x1bc [] request_irq+0x106/0x12f [] pcie_init+0x15e/0x6cc [] pciehp_probe+0x64/0x541 [] pcie_port_probe_service+0x4c/0x76 [] driver_probe_device+0xd4/0x1f0 [] __driver_attach+0x7c/0x7e [] ? __driver_attach+0x0/0x7e [] bus_for_each_dev+0x53/0x7d [] driver_attach+0x1c/0x1e [] bus_add_driver+0xdd/0x25b [] ? pcied_init+0x0/0x8b [] driver_register+0x5f/0x13e [] ? pcied_init+0x0/0x8b [] pcie_port_service_register+0x47/0x49 [] pcied_init+0x15/0x8b [] kernel_init+0x75/0x243 [] ? _spin_unlock_irq+0x2b/0x3a [] ? finish_task_switch+0x57/0x9a [] child_rip+0xa/0x12 [] ? restore_args+0x0/0x30 [] ? kernel_init+0x0/0x243 [] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [] pciehp_handle_presence_change+0x7e/0x113 RSP CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 8264a76..920091c 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -146,10 +146,10 @@ struct controller { extern int pciehp_sysfs_enable_slot(struct slot *slot); extern int pciehp_sysfs_disable_slot(struct slot *slot); -extern u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl); -extern u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl); +extern u8 pciehp_handle_attention_button(struct slot *p_slot); + extern u8 pciehp_handle_switch_change(struct slot *p_slot); +extern u8 pciehp_handle_presence_change(struct slot *p_slot); +extern u8 pciehp_handle_power_fault(struct slot *p_slot); extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 0a7aa62..7ad8a7d 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -55,16 +55,13 @@ static int queue_interrupt_event(struct slot *p_slot, u32 event_type) return 0; } -u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_attention_button(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; /* Attention Button Change */ dbg("pciehp: Attention button interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - /* * Button pressed - See if need to TAKE ACTION!!! */ @@ -76,18 +73,15 @@ u8 pciehp_handle_attention_button(u8 hp_slot, struct controller *ctrl) return 0; } -u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_switch_change(struct slot *p_slot) { - struct slot *p_slot; u8 getstatus; u32 event_type; /* Switch Change */ dbg("pciehp: Switch interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); p_slot->hpc_ops->get_latch_status(p_slot, &getstatus); - if (getstatus) { /* * Switch opened @@ -107,17 +101,14 @@ u8 pciehp_handle_switch_change(u8 hp_slot, struct controller *ctrl) return 1; } -u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_presence_change(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; u8 presence_save; /* Presence Change */ dbg("pciehp: Presence/Notify input change.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - /* Switch is open, assume a presence change * Save the presence state */ @@ -141,16 +132,13 @@ u8 pciehp_handle_presence_change(u8 hp_slot, struct controller *ctrl) return 1; } -u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl) +u8 pciehp_handle_power_fault(struct slot *p_slot) { - struct slot *p_slot; u32 event_type; /* power fault */ dbg("pciehp: Power fault interrupt received.\n"); - p_slot = pciehp_find_slot(ctrl, hp_slot + ctrl->slot_device_offset); - if ( !(p_slot->hpc_ops->query_power_fault(p_slot))) { /* * power fault Cleared @@ -163,7 +151,7 @@ u8 pciehp_handle_power_fault(u8 hp_slot, struct controller *ctrl) */ info("Power fault on Slot(%s)\n", p_slot->name); event_type = INT_POWER_FAULT; - info("power fault bit %x set\n", hp_slot); + info("power fault bit %x set\n", 0); } queue_interrupt_event(p_slot, event_type); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 891f81a..425a0f6 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -722,6 +722,7 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) { struct controller *ctrl = (struct controller *)dev_id; u16 detected, intr_loc; + struct slot *p_slot; /* * In order to guarantee that all interrupt events are @@ -756,21 +757,38 @@ static irqreturn_t pcie_isr(int irq, void *dev_id) wake_up_interruptible(&ctrl->queue); } + if (!(intr_loc & ~CMD_COMPLETED)) + return IRQ_HANDLED; + + /* + * Return without handling events if this handler routine is + * called before controller initialization is done. This may + * happen if hotplug event or another interrupt that shares + * the IRQ with pciehp arrives before slot initialization is + * done after interrupt handler is registered. + * + * FIXME - Need more structural fixes. We need to be ready to + * handle the event before installing interrupt handler. + */ + p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); + if (!p_slot || !p_slot->hpc_ops) + return IRQ_HANDLED; + /* Check MRL Sensor Changed */ if (intr_loc & MRL_SENS_CHANGED) - pciehp_handle_switch_change(0, ctrl); + pciehp_handle_switch_change(p_slot); /* Check Attention Button Pressed */ if (intr_loc & ATTN_BUTTN_PRESSED) - pciehp_handle_attention_button(0, ctrl); + pciehp_handle_attention_button(p_slot); /* Check Presence Detect Changed */ if (intr_loc & PRSN_DETECT_CHANGED) - pciehp_handle_presence_change(0, ctrl); + pciehp_handle_presence_change(p_slot); /* Check Power Fault Detected */ if (intr_loc & PWR_FAULT_DETECTED) - pciehp_handle_power_fault(0, ctrl); + pciehp_handle_power_fault(p_slot); return IRQ_HANDLED; } @@ -1028,6 +1046,12 @@ static int pciehp_acpi_get_hp_hw_control_from_firmware(struct pci_dev *dev) static int pcie_init_hardware_part1(struct controller *ctrl, struct pcie_device *dev) { + /* Clear all remaining event bits in Slot Status register */ + if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { + err("%s: Cannot write to SLOTSTATUS register\n", __func__); + return -1; + } + /* Mask Hot-plug Interrupt Enable */ if (pcie_write_cmd(ctrl, 0, HP_INTR_ENABLE | CMD_CMPL_INTR_ENABLE)) { err("%s: Cannot mask hotplug interrupt enable\n", __func__); @@ -1040,16 +1064,6 @@ int pcie_init_hardware_part2(struct controller *ctrl, struct pcie_device *dev) { u16 cmd, mask; - /* - * We need to clear all events before enabling hotplug interrupt - * notification mechanism in order for hotplug controler to - * generate interrupts. - */ - if (pciehp_writew(ctrl, SLOTSTATUS, 0x1f)) { - err("%s: Cannot write to SLOTSTATUS register\n", __FUNCTION__); - return -1; - } - cmd = PRSN_DETECT_ENABLE; if (ATTN_BUTTN(ctrl)) cmd |= ATTN_BUTTN_ENABLE; -- cgit v0.10.2 From 5808639bfa98d69f77a481d759570d85f164fea0 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:04:30 +0900 Subject: pciehp: fix slow probing Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. The command completed bit in Slot Status register applies only to commands issued to control the attention indicator, power indicator, power controller, or electromechanical interlock. However, writes to other parts of the Slot Control register would end up writing to the control fields. Hence, any write to Slot Control register is considered as a command. However, if the controller doesn't support any of attention indicator, power indicator, power controller and electromechanical interlock, command completed bit would not set in writing to Slot Control register. In this case, we should not wait for command completed bit set, otherwise all commands would be considered not completed in timeout seconds (1 sec.). The cause of the problem is pciehp driver didn't take this situation into account. This patch changes pciehp to take it into account. This patch also add the check for "No Command Completed Support" bit in Slot Capability register. If it is set, we should not wait for command completed bit set as well. This problem seems to be revealed by the commit c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that pciehp did not wait for command completed properly (pciehp just ignored the command completion event). Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index 920091c..79c9dda 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -97,6 +97,7 @@ struct controller { u8 cap_base; struct timer_list poll_timer; volatile int cmd_busy; + unsigned int no_cmd_complete:1; }; #define INT_BUTTON_IGNORE 0 @@ -135,6 +136,7 @@ struct controller { #define PWR_LED_PRSN 0x00000010 #define HP_SUPR_RM_SUP 0x00000020 #define EMI_PRSN 0x00020000 +#define NO_CMD_CMPL_SUP 0x00040000 #define ATTN_BUTTN(ctrl) ((ctrl)->slot_cap & ATTN_BUTTN_PRSN) #define POWER_CTRL(ctrl) ((ctrl)->slot_cap & PWR_CTRL_PRSN) @@ -143,6 +145,7 @@ struct controller { #define PWR_LED(ctrl) ((ctrl)->slot_cap & PWR_LED_PRSN) #define HP_SUPR_RM(ctrl) ((ctrl)->slot_cap & HP_SUPR_RM_SUP) #define EMI(ctrl) ((ctrl)->slot_cap & EMI_PRSN) +#define NO_CMD_CMPL(ctrl) ((ctrl)->slot_cap & NO_CMD_CMPL_SUP) extern int pciehp_sysfs_enable_slot(struct slot *slot); extern int pciehp_sysfs_disable_slot(struct slot *slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 425a0f6..70940fb 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -286,12 +286,28 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) goto out; } - if ((slot_status & CMD_COMPLETED) == CMD_COMPLETED ) { - /* After 1 sec and CMD_COMPLETED still not set, just - proceed forward to issue the next command according - to spec. Just print out the error message */ - dbg("%s: CMD_COMPLETED not clear after 1 sec.\n", - __func__); + if (slot_status & CMD_COMPLETED) { + if (!ctrl->no_cmd_complete) { + /* + * After 1 sec and CMD_COMPLETED still not set, just + * proceed forward to issue the next command according + * to spec. Just print out the error message. + */ + dbg("%s: CMD_COMPLETED not clear after 1 sec.\n", + __func__); + } else if (!NO_CMD_CMPL(ctrl)) { + /* + * This controller semms to notify of command completed + * event even though it supports none of power + * controller, attention led, power led and EMI. + */ + dbg("%s: Unexpected CMD_COMPLETED. Need to wait for " + "command completed event.\n", __func__); + ctrl->no_cmd_complete = 0; + } else { + dbg("%s: Unexpected CMD_COMPLETED. Maybe the " + "controller is broken.\n", __func__); + } } retval = pciehp_readw(ctrl, SLOTCTRL, &slot_ctrl); @@ -315,7 +331,7 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) /* * Wait for command completion. */ - if (!retval) + if (!retval && !ctrl->no_cmd_complete) retval = pcie_wait_cmd(ctrl); out: mutex_unlock(&ctrl->ctrl_lock); @@ -1130,6 +1146,7 @@ static inline void dbg_ctrl(struct controller *ctrl) dbg(" Power Indicator : %3s\n", PWR_LED(ctrl) ? "yes" : "no"); dbg(" Hot-Plug Surprise : %3s\n", HP_SUPR_RM(ctrl) ? "yes" : "no"); dbg(" EMI Present : %3s\n", EMI(ctrl) ? "yes" : "no"); + dbg(" Comamnd Completed : %3s\n", NO_CMD_CMPL(ctrl)? "no" : "yes"); pciehp_readw(ctrl, SLOTSTATUS, ®16); dbg("Slot Status : 0x%04x\n", reg16); pciehp_readw(ctrl, SLOTSTATUS, ®16); @@ -1161,6 +1178,15 @@ int pcie_init(struct controller *ctrl, struct pcie_device *dev) mutex_init(&ctrl->ctrl_lock); init_waitqueue_head(&ctrl->queue); dbg_ctrl(ctrl); + /* + * Controller doesn't notify of command completion if the "No + * Command Completed Support" bit is set in Slot Capability + * register or the controller supports none of power + * controller, attention led, power led and EMI. + */ + if (NO_CMD_CMPL(ctrl) || + !(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl))) + ctrl->no_cmd_complete = 1; info("HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n", pdev->vendor, pdev->device, -- cgit v0.10.2 From 6592e02ae4bd7b277230aa0c5821588a13b9d8e3 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:05:26 +0900 Subject: pciehp: poll cmd completion if hotplug interrupt is disabled Fix improper long wait for command completion in pciehp probing. As described in PCI Express specification, software notification is not generated if the command that occurs as a result of a write to the Slot Control register that disables software notification of command completed events. Since pciehp driver doesn't take it into account, such command is issued in pciehp probing, and it causes improper long wait for command completion. This patch changes the pciehp driver to take such command into account. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 70940fb..eb631af 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -247,14 +247,38 @@ static inline void pciehp_free_irq(struct controller *ctrl) free_irq(ctrl->pci_dev->irq, ctrl); } -static inline int pcie_wait_cmd(struct controller *ctrl) +static inline int pcie_poll_cmd(struct controller *ctrl) +{ + u16 slot_status; + int timeout = 1000; + + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) + if (slot_status & CMD_COMPLETED) + goto completed; + for (timeout = 1000; timeout > 0; timeout -= 100) { + msleep(100); + if (!pciehp_readw(ctrl, SLOTSTATUS, &slot_status)) + if (slot_status & CMD_COMPLETED) + goto completed; + } + return 0; /* timeout */ + +completed: + pciehp_writew(ctrl, SLOTSTATUS, CMD_COMPLETED); + return timeout; +} + +static inline int pcie_wait_cmd(struct controller *ctrl, int poll) { int retval = 0; unsigned int msecs = pciehp_poll_mode ? 2500 : 1000; unsigned long timeout = msecs_to_jiffies(msecs); int rc; - rc = wait_event_interruptible_timeout(ctrl->queue, + if (poll) + rc = pcie_poll_cmd(ctrl); + else + rc = wait_event_interruptible_timeout(ctrl->queue, !ctrl->cmd_busy, timeout); if (!rc) dbg("Command not completed in 1000 msec\n"); @@ -331,8 +355,18 @@ static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask) /* * Wait for command completion. */ - if (!retval && !ctrl->no_cmd_complete) - retval = pcie_wait_cmd(ctrl); + if (!retval && !ctrl->no_cmd_complete) { + int poll = 0; + /* + * if hotplug interrupt is not enabled or command + * completed interrupt is not enabled, we need to poll + * command completed event. + */ + if (!(slot_ctrl & HP_INTR_ENABLE) || + !(slot_ctrl & CMD_CMPL_INTR_ENABLE)) + poll = 1; + retval = pcie_wait_cmd(ctrl, poll); + } out: mutex_unlock(&ctrl->ctrl_lock); return retval; -- cgit v0.10.2 From 0711c70ec0e9d2c002b1e9b5fb9f21e49d77f4fd Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:06:22 +0900 Subject: pciehp: move msleep after power off According to the PCI Express specification, we must wait for at least 1 second after turning power off before taking any action that relies on power having been removed from the slot/adapter. For this, current pciehp wait for 1 second after issuing the power off command in hpc_power_off_slot() function. But waiting for 1 second in hpc_power_off_slot() can make pciehp probing slow-down because pciehp probe code calls hpc_power_off_slot() if the slot is not occupied just in case. We don't need to wait for 1 second at the pciehp probe time because there is no action on that empty slot. So move 1 second wait from hpc_power_off_slot() to the caller of hpc_power_off_slot(). Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_ctrl.c b/drivers/pci/hotplug/pciehp_ctrl.c index 7ad8a7d..96a5d55 100644 --- a/drivers/pci/hotplug/pciehp_ctrl.c +++ b/drivers/pci/hotplug/pciehp_ctrl.c @@ -174,6 +174,13 @@ static void set_slot_off(struct controller *ctrl, struct slot * pslot) } } + /* + * After turning power off, we must wait for at least 1 second + * before taking any action that relies on power having been + * removed from the slot/adapter. + */ + msleep(1000); + if (PWR_LED(ctrl)) pslot->hpc_ops->green_led_off(pslot); @@ -277,6 +284,13 @@ static int remove_board(struct slot *p_slot) } } + /* + * After turning power off, we must wait for at least 1 second + * before taking any action that relies on power having been + * removed from the slot/adapter. + */ + msleep(1000); + if (PWR_LED(ctrl)) /* turn off Green LED */ p_slot->hpc_ops->green_led_off(p_slot); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index eb631af..79f1049 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -754,13 +754,6 @@ static int hpc_power_off_slot(struct slot * slot) } dbg("%s: SLOTCTRL %x write cmd %x\n", __func__, ctrl->cap_base + SLOTCTRL, slot_cmd); - - /* - * After turning power off, we must wait for at least 1 second - * before taking any action that relies on power having been - * removed from the slot/adapter. - */ - msleep(1000); out: if (changed) pcie_unmask_bad_dllp(ctrl); -- cgit v0.10.2 From a86161b3134465f072d965ca7508ec9c1e2e52c7 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:07:01 +0900 Subject: pci hotplug core: add check of duplicate slot name Fix the following errors reported by Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. kobject_add_internal failed for 2 with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3 #1 [] kobject_add_internal+0x140/0x190 [] kobject_init_and_add+0x2d/0x40 [] pci_hp_register+0x81/0x2f0 [] pciehp_probe+0x1a7/0x470 [] sysfs_add_one+0x44/0xa0 [] sysfs_addrm_start+0x3f/0xb0 [] sysfs_create_link+0x8a/0xf0 [] pcie_port_probe_service+0x50/0x80 [] driver_sysfs_add+0x55/0x70 [] driver_probe_device+0x82/0x180 [] __driver_attach+0x6c/0x70 [] bus_for_each_dev+0x3a/0x60 [] pcied_init+0x0/0x80 [] driver_attach+0x16/0x20 [] __driver_attach+0x0/0x70 [] bus_add_driver+0x1a1/0x220 [] pcied_init+0x0/0x80 [] driver_register+0x4d/0x120 [] ibm_acpiphp_init+0x0/0x190 [] printk+0x1b/0x20 [] pcied_init+0x0/0x80 [] pcied_init+0xe/0x80 [] kernel_init+0x10a/0x300 [] schedule_tail+0x18/0x50 [] ret_from_fork+0x6/0x1c [] kernel_init+0x0/0x300 [] kernel_init+0x0/0x300 [] kernel_thread_helper+0x7/0x1c ======================= pci_hotplug: Unable to register kobject '2'<3>pciehp: pci_hp_register failed with error -22 Slot with the same name can be registered multiple times if shpchp or pciehp driver is loaded after acpiphp is loaded because ACPI based hotplug driver and Native OS hotplug driver trying to handle the same physical slot. In this case, current pci_hotplug core will call kobject_init_and_add() muliple time with the same name. This is the cause of this problem. To fix this problem, this patch adds the check into pci_hp_register() to see if the slot with the same name. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pci_hotplug_core.c b/drivers/pci/hotplug/pci_hotplug_core.c index 925ba16..a11021e 100644 --- a/drivers/pci/hotplug/pci_hotplug_core.c +++ b/drivers/pci/hotplug/pci_hotplug_core.c @@ -619,6 +619,7 @@ static struct hotplug_slot *get_slot_from_name (const char *name) int pci_hp_register (struct hotplug_slot *slot) { int result; + struct hotplug_slot *tmp; if (slot == NULL) return -ENODEV; @@ -630,7 +631,11 @@ int pci_hp_register (struct hotplug_slot *slot) return -EINVAL; } - /* this can fail if we have already registered a slot with the same name */ + /* Check if we have already registered a slot with the same name. */ + tmp = get_slot_from_name(slot->name); + if (tmp) + return -EEXIST; + slot->kobj.kset = pci_hotplug_slots_kset; result = kobject_init_and_add(&slot->kobj, &hotplug_slot_ktype, NULL, "%s", slot->name); -- cgit v0.10.2 From 9e4f2e8d4ddb04ad16a3828cd9a369a5a5287009 Mon Sep 17 00:00:00 2001 From: Kenji Kaneshige Date: Tue, 27 May 2008 19:07:33 +0900 Subject: pciehp: add message about pciehp_slot_with_bus option Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The pciehp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige Signed-off-by: Kristen Carlson Accardi Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 43d8ddb..48a2ed3 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -254,7 +254,11 @@ static int init_slots(struct controller *ctrl) slot->hp_slot, slot->number, ctrl->slot_device_offset); retval = pci_hp_register(hotplug_slot); if (retval) { - err ("pci_hp_register failed with error %d\n", retval); + err("pci_hp_register failed with error %d\n", retval); + if (retval == -EEXIST) + err("Failed to register slot because of name " + "collision. Try \'pciehp_slot_with_bus\' " + "module option.\n"); goto error_info; } /* create additional sysfs entries */ -- cgit v0.10.2 From 57f5b1590f2d801a3a7f072e2c65f14d4545852c Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Wed, 28 May 2008 00:54:01 -0400 Subject: Input: atkbd - mark keyboard as disabled when suspending/unloading This will shut off garbage that may come from KBD port during resume. Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 4a95adc..af58a6f 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -807,6 +807,8 @@ static int atkbd_activate(struct atkbd *atkbd) static void atkbd_cleanup(struct serio *serio) { struct atkbd *atkbd = serio_get_drvdata(serio); + + atkbd_disable(atkbd); ps2_command(&atkbd->ps2dev, NULL, ATKBD_CMD_RESET_BAT); } -- cgit v0.10.2 From a82c53a0e3f57f02782330372b7adad67b417645 Mon Sep 17 00:00:00 2001 From: Tom Zanussi Date: Fri, 9 May 2008 13:28:36 +0200 Subject: splice: fix sendfile() issue with relay Splice isn't always incrementing the ppos correctly, which broke relay splice. Signed-off-by: Tom Zanussi Tested-by: Dan Williams Signed-off-by: Jens Axboe diff --git a/fs/splice.c b/fs/splice.c index 7815003..a048ad2 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -983,7 +983,7 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, while (len) { size_t read_len; - loff_t pos = sd->pos; + loff_t pos = sd->pos, prev_pos = pos; ret = do_splice_to(in, &pos, pipe, len, flags); if (unlikely(ret <= 0)) @@ -998,15 +998,19 @@ ssize_t splice_direct_to_actor(struct file *in, struct splice_desc *sd, * could get stuck data in the internal pipe: */ ret = actor(pipe, sd); - if (unlikely(ret <= 0)) + if (unlikely(ret <= 0)) { + sd->pos = prev_pos; goto out_release; + } bytes += ret; len -= ret; sd->pos = pos; - if (ret < read_len) + if (ret < read_len) { + sd->pos = prev_pos + ret; goto out_release; + } } done: @@ -1072,7 +1076,7 @@ long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, ret = splice_direct_to_actor(in, &sd, direct_splice_actor); if (ret > 0) - *ppos += ret; + *ppos = sd.pos; return ret; } diff --git a/kernel/relay.c b/kernel/relay.c index bc24dcd..7de644c 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -1191,7 +1191,7 @@ static ssize_t relay_file_splice_read(struct file *in, ret = 0; spliced = 0; - while (len) { + while (len && !spliced) { ret = subbuf_splice_actor(in, ppos, pipe, len, flags, &nonpad_ret); if (ret < 0) break; -- cgit v0.10.2 From ca39d651d17df49b6d11f851d56c0ce0ce01ea1a Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 20 May 2008 21:27:41 +0200 Subject: splice: handle try_to_release_page() failure splice currently assumes that try_to_release_page() always suceeds, but it can return failure. If it does, we cannot steal the page. Acked-by: Mingming Cao diff --git a/fs/splice.c b/fs/splice.c index a048ad2..aa5f6f6 100644 --- a/fs/splice.c +++ b/fs/splice.c @@ -58,8 +58,8 @@ static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe, */ wait_on_page_writeback(page); - if (PagePrivate(page)) - try_to_release_page(page, GFP_KERNEL); + if (PagePrivate(page) && !try_to_release_page(page, GFP_KERNEL)) + goto out_unlock; /* * If we succeeded in removing the mapping, set LRU flag @@ -75,6 +75,7 @@ static int page_cache_pipe_buf_steal(struct pipe_inode_info *pipe, * Raced with truncate or failed to remove page from current * address space, unlock and return failure. */ +out_unlock: unlock_page(page); return 1; } -- cgit v0.10.2 From 05caf8dbc1880415df3378cfd114d832c9618b60 Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Thu, 22 May 2008 15:13:29 +0200 Subject: block: Move the second call to get_request to the end of the loop In function get_request_wait, the second call to get_request could be moved to the end of the while loop, because if the first call to get_request fails, the second call will fail without sleep. Signed-off-by: Zhang Yanmin Signed-off-by: Jens Axboe diff --git a/block/blk-core.c b/block/blk-core.c index 6a9cc0d..1905aab 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -806,35 +806,32 @@ static struct request *get_request_wait(struct request_queue *q, int rw_flags, rq = get_request(q, rw_flags, bio, GFP_NOIO); while (!rq) { DEFINE_WAIT(wait); + struct io_context *ioc; struct request_list *rl = &q->rq; prepare_to_wait_exclusive(&rl->wait[rw], &wait, TASK_UNINTERRUPTIBLE); - rq = get_request(q, rw_flags, bio, GFP_NOIO); - - if (!rq) { - struct io_context *ioc; + blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ); - blk_add_trace_generic(q, bio, rw, BLK_TA_SLEEPRQ); - - __generic_unplug_device(q); - spin_unlock_irq(q->queue_lock); - io_schedule(); + __generic_unplug_device(q); + spin_unlock_irq(q->queue_lock); + io_schedule(); - /* - * After sleeping, we become a "batching" process and - * will be able to allocate at least one request, and - * up to a big batch of them for a small period time. - * See ioc_batching, ioc_set_batching - */ - ioc = current_io_context(GFP_NOIO, q->node); - ioc_set_batching(q, ioc); + /* + * After sleeping, we become a "batching" process and + * will be able to allocate at least one request, and + * up to a big batch of them for a small period time. + * See ioc_batching, ioc_set_batching + */ + ioc = current_io_context(GFP_NOIO, q->node); + ioc_set_batching(q, ioc); - spin_lock_irq(q->queue_lock); - } + spin_lock_irq(q->queue_lock); finish_wait(&rl->wait[rw], &wait); - } + + rq = get_request(q, rw_flags, bio, GFP_NOIO); + }; return rq; } -- cgit v0.10.2 From be754d2c2161c0cce11d62727016985ecb76831b Mon Sep 17 00:00:00 2001 From: Richard Kennedy Date: Fri, 23 May 2008 06:52:00 +0200 Subject: block: reorder cfq_queue to save space on 64bit builds saves 8 bytes of padding & increases objects/slab from 30 to 32 on my AMD64 config Signed-off-by: Richard Kennedy Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index b399c62..4df3f05 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -124,6 +124,8 @@ struct cfq_data { struct cfq_queue { /* reference count */ atomic_t ref; + /* various state flags, see below */ + unsigned int flags; /* parent cfq_data */ struct cfq_data *cfqd; /* service_tree member */ @@ -138,14 +140,14 @@ struct cfq_queue { int queued[2]; /* currently allocated requests */ int allocated[2]; - /* pending metadata requests */ - int meta_pending; /* fifo list of requests in sort_list */ struct list_head fifo; unsigned long slice_end; long slice_resid; + /* pending metadata requests */ + int meta_pending; /* number of requests that are on the dispatch list or inside driver */ int dispatched; @@ -153,8 +155,6 @@ struct cfq_queue { unsigned short ioprio, org_ioprio; unsigned short ioprio_class, org_ioprio_class; - /* various state flags, see below */ - unsigned int flags; }; enum cfqq_state_flags { -- cgit v0.10.2 From 9d5f09a424a67ddb959829894efb4c71cbf6d600 Mon Sep 17 00:00:00 2001 From: "Alan D. Brunelle" Date: Tue, 27 May 2008 14:54:41 +0200 Subject: Added in MESSAGE notes for blktraces Allows messages to be inserted into blktrace streams. Signed-off-by: Alan D. Brunelle Signed-off-by: Jens Axboe diff --git a/block/blktrace.c b/block/blktrace.c index b2cbb4e..20e11f3 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -75,6 +75,20 @@ static void trace_note_time(struct blk_trace *bt) local_irq_restore(flags); } +void __trace_note_message(struct blk_trace *bt, const char *fmt, ...) +{ + int n; + va_list args; + static char bt_msg_buf[BLK_TN_MAX_MSG]; + + va_start(args, fmt); + n = vscnprintf(bt_msg_buf, BLK_TN_MAX_MSG, fmt, args); + va_end(args); + + trace_note(bt, 0, BLK_TN_MESSAGE, bt_msg_buf, n); +} +EXPORT_SYMBOL_GPL(__trace_note_message); + static int act_log_check(struct blk_trace *bt, u32 what, sector_t sector, pid_t pid) { diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index cfc3147..b7cd8f1 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -55,6 +55,7 @@ enum blktrace_act { enum blktrace_notify { __BLK_TN_PROCESS = 0, /* establish pid/name mapping */ __BLK_TN_TIMESTAMP, /* include system clock */ + __BLK_TN_MESSAGE, /* Character string message */ }; @@ -79,6 +80,7 @@ enum blktrace_notify { #define BLK_TN_PROCESS (__BLK_TN_PROCESS | BLK_TC_ACT(BLK_TC_NOTIFY)) #define BLK_TN_TIMESTAMP (__BLK_TN_TIMESTAMP | BLK_TC_ACT(BLK_TC_NOTIFY)) +#define BLK_TN_MESSAGE (__BLK_TN_MESSAGE | BLK_TC_ACT(BLK_TC_NOTIFY)) #define BLK_IO_TRACE_MAGIC 0x65617400 #define BLK_IO_TRACE_VERSION 0x07 @@ -149,7 +151,28 @@ extern void blk_trace_shutdown(struct request_queue *); extern void __blk_add_trace(struct blk_trace *, sector_t, int, int, u32, int, int, void *); extern int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev, struct blk_user_trace_setup *buts); +extern void __trace_note_message(struct blk_trace *, const char *fmt, ...); +/** + * blk_add_trace_msg - Add a (simple) message to the blktrace stream + * @q: queue the io is for + * @fmt: format to print message in + * args... Variable argument list for format + * + * Description: + * Records a (simple) message onto the blktrace stream. + * + * NOTE: BLK_TN_MAX_MSG characters are output at most. + * NOTE: Can not use 'static inline' due to presence of var args... + * + **/ +#define blk_add_trace_msg(q, fmt, ...) \ + do { \ + struct blk_trace *bt = (q)->blk_trace; \ + if (unlikely(bt)) \ + __trace_note_message(bt, fmt, ##__VA_ARGS__); \ + } while (0) +#define BLK_TN_MAX_MSG 1024 /** * blk_add_trace_rq - Add a trace for a request oriented action @@ -299,6 +322,8 @@ extern int blk_trace_remove(struct request_queue *q); #define blk_trace_setup(q, name, dev, arg) (-ENOTTY) #define blk_trace_startstop(q, start) (-ENOTTY) #define blk_trace_remove(q) (-ENOTTY) +#define blk_add_trace_msg(q, fmt, ...) do { } while (0) + #endif /* CONFIG_BLK_DEV_IO_TRACE */ #endif /* __KERNEL__ */ #endif -- cgit v0.10.2 From 4722dc52a891ab6cb2d637ddb87233e0ce277827 Mon Sep 17 00:00:00 2001 From: "Alan D. Brunelle" Date: Tue, 27 May 2008 14:55:00 +0200 Subject: Added in elevator switch message to blktrace stream Signed-off-by: Alan D. Brunelle Signed-off-by: Jens Axboe diff --git a/block/elevator.c b/block/elevator.c index 980f8ae..902dd13 100644 --- a/block/elevator.c +++ b/block/elevator.c @@ -1110,6 +1110,8 @@ static int elevator_switch(struct request_queue *q, struct elevator_type *new_e) queue_flag_clear(QUEUE_FLAG_ELVSWITCH, q); spin_unlock_irq(q->queue_lock); + blk_add_trace_msg(q, "elv switch: %s", e->elevator_type->elevator_name); + return 1; fail_register: -- cgit v0.10.2 From 64565911cdb57c2f512a9715b985b5617402cc67 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 28 May 2008 14:45:33 +0200 Subject: block: make blktrace use per-cpu buffers for message notes Currently it uses a single static char array, but that risks being corrupted when multiple users issue message notes at the same time. Make the buffers dynamically allocated when the trace is setup and make them per-cpu instead. The default max message size of 1k is also very large, the interface is mainly for small text notes. So shrink it to 128 bytes. Signed-off-by: Jens Axboe diff --git a/block/blktrace.c b/block/blktrace.c index 20e11f3..7ae87cc 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -79,13 +79,16 @@ void __trace_note_message(struct blk_trace *bt, const char *fmt, ...) { int n; va_list args; - static char bt_msg_buf[BLK_TN_MAX_MSG]; + char *buf; + preempt_disable(); + buf = per_cpu_ptr(bt->msg_data, smp_processor_id()); va_start(args, fmt); - n = vscnprintf(bt_msg_buf, BLK_TN_MAX_MSG, fmt, args); + n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args); va_end(args); - trace_note(bt, 0, BLK_TN_MESSAGE, bt_msg_buf, n); + trace_note(bt, 0, BLK_TN_MESSAGE, buf, n); + preempt_enable(); } EXPORT_SYMBOL_GPL(__trace_note_message); @@ -246,6 +249,7 @@ static void blk_trace_cleanup(struct blk_trace *bt) debugfs_remove(bt->dropped_file); blk_remove_tree(bt->dir); free_percpu(bt->sequence); + free_percpu(bt->msg_data); kfree(bt); } @@ -360,6 +364,10 @@ int do_blk_trace_setup(struct request_queue *q, char *name, dev_t dev, if (!bt->sequence) goto err; + bt->msg_data = __alloc_percpu(BLK_TN_MAX_MSG); + if (!bt->msg_data) + goto err; + ret = -ENOENT; dir = blk_create_tree(buts->name); if (!dir) @@ -406,6 +414,7 @@ err: if (bt->dropped_file) debugfs_remove(bt->dropped_file); free_percpu(bt->sequence); + free_percpu(bt->msg_data); if (bt->rchan) relay_close(bt->rchan); kfree(bt); diff --git a/include/linux/blktrace_api.h b/include/linux/blktrace_api.h index b7cd8f1..e3ef903 100644 --- a/include/linux/blktrace_api.h +++ b/include/linux/blktrace_api.h @@ -121,6 +121,7 @@ struct blk_trace { int trace_state; struct rchan *rchan; unsigned long *sequence; + unsigned char *msg_data; u16 act_mask; u64 start_lba; u64 end_lba; @@ -172,7 +173,7 @@ extern void __trace_note_message(struct blk_trace *, const char *fmt, ...); if (unlikely(bt)) \ __trace_note_message(bt, fmt, ##__VA_ARGS__); \ } while (0) -#define BLK_TN_MAX_MSG 1024 +#define BLK_TN_MAX_MSG 128 /** * blk_add_trace_rq - Add a trace for a request oriented action -- cgit v0.10.2 From d6de8be711b28049a5cb93c954722c311c7d3f7f Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Wed, 28 May 2008 14:46:59 +0200 Subject: cfq-iosched: fix RCU problem in cfq_cic_lookup() cfq_cic_lookup() needs to properly protect ioc->ioc_data before dereferencing it and also exclude updaters of ioc->ioc_data as well. Also add a number of comments documenting why the existing RCU usage is OK. Thanks a lot to "Paul E. McKenney" for review and comments! Signed-off-by: Jens Axboe diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index 4df3f05..d01b411 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -1142,6 +1142,9 @@ static void cfq_put_queue(struct cfq_queue *cfqq) kmem_cache_free(cfq_pool, cfqq); } +/* + * Must always be called with the rcu_read_lock() held + */ static void __call_for_each_cic(struct io_context *ioc, void (*func)(struct io_context *, struct cfq_io_context *)) @@ -1197,6 +1200,11 @@ static void cic_free_func(struct io_context *ioc, struct cfq_io_context *cic) cfq_cic_free(cic); } +/* + * Must be called with rcu_read_lock() held or preemption otherwise disabled. + * Only two callers of this - ->dtor() which is called with the rcu_read_lock(), + * and ->trim() which is called with the task lock held + */ static void cfq_free_io_context(struct io_context *ioc) { /* @@ -1502,20 +1510,24 @@ static struct cfq_io_context * cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc) { struct cfq_io_context *cic; + unsigned long flags; void *k; if (unlikely(!ioc)) return NULL; + rcu_read_lock(); + /* * we maintain a last-hit cache, to avoid browsing over the tree */ cic = rcu_dereference(ioc->ioc_data); - if (cic && cic->key == cfqd) + if (cic && cic->key == cfqd) { + rcu_read_unlock(); return cic; + } do { - rcu_read_lock(); cic = radix_tree_lookup(&ioc->radix_root, (unsigned long) cfqd); rcu_read_unlock(); if (!cic) @@ -1524,10 +1536,13 @@ cfq_cic_lookup(struct cfq_data *cfqd, struct io_context *ioc) k = cic->key; if (unlikely(!k)) { cfq_drop_dead_cic(cfqd, ioc, cic); + rcu_read_lock(); continue; } + spin_lock_irqsave(&ioc->lock, flags); rcu_assign_pointer(ioc->ioc_data, cic); + spin_unlock_irqrestore(&ioc->lock, flags); break; } while (1); @@ -2134,6 +2149,10 @@ static void *cfq_init_queue(struct request_queue *q) static void cfq_slab_kill(void) { + /* + * Caller already ensured that pending RCU callbacks are completed, + * so we should have no busy allocations at this point. + */ if (cfq_pool) kmem_cache_destroy(cfq_pool); if (cfq_ioc_pool) @@ -2292,6 +2311,11 @@ static void __exit cfq_exit(void) ioc_gone = &all_gone; /* ioc_gone's update must be visible before reading ioc_count */ smp_wmb(); + + /* + * this also protects us from entering cfq_slab_kill() with + * pending RCU callbacks + */ if (elv_ioc_count_read(ioc_count)) wait_for_completion(ioc_gone); cfq_slab_kill(); -- cgit v0.10.2 From 5e55843bb8ed1ec7d134a759c53e34beb1618952 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Wed, 28 May 2008 13:55:24 +0100 Subject: MN10300: Fix typo in header guard Fix a typo in the header guard of asm/ipc.h. Signed-off-by: Vegard Nossum Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/include/asm-mn10300/ipcbuf.h b/include/asm-mn10300/ipcbuf.h index efbbef8..f6f63d4 100644 --- a/include/asm-mn10300/ipcbuf.h +++ b/include/asm-mn10300/ipcbuf.h @@ -1,4 +1,4 @@ -#ifndef _ASM_IPCBUF_H_ +#ifndef _ASM_IPCBUF_H #define _ASM_IPCBUF_H /* -- cgit v0.10.2 From dc1d60a014aa9614518f9856ff661716d0969ffd Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 28 May 2008 15:36:34 +0100 Subject: FRV: Specify the minimum slab/kmalloc alignment Specify the minimum slab/kmalloc alignment to be 8 bytes. This fixes a crash when SLOB is selected as the memory allocator. The FRV arch needs this so that it can use the load- and store-double instructions without faulting. By default SLOB sets the minimum to be 4 bytes. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h index 734a1d0..8a15c90 100644 --- a/include/asm-frv/mem-layout.h +++ b/include/asm-frv/mem-layout.h @@ -31,6 +31,13 @@ #define PAGE_MASK (~(PAGE_SIZE-1)) +/* + * the slab must be aligned such that load- and store-double instructions don't + * fault if used + */ +#define ARCH_KMALLOC_MINALIGN (sizeof(long) * 2) +#define ARCH_SLAB_MINALIGN (sizeof(long) * 2) + /*****************************************************************************/ /* * virtual memory layout from kernel's point of view -- cgit v0.10.2 From 0a2ce2ffc358da96792d514c1024b72c52be9cc1 Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 28 May 2008 16:49:01 +0100 Subject: Fix FRV minimum slab/kmalloc alignment > +#define ARCH_KMALLOC_MINALIGN (sizeof(long) * 2) > +#define ARCH_SLAB_MINALIGN (sizeof(long) * 2) This doesn't work if SLAB is selected and slab debugging is enabled as these are passed to the preprocessor, and the preprocessor doesn't understand sizeof. Signed-off-by: Linus Torvalds diff --git a/include/asm-frv/mem-layout.h b/include/asm-frv/mem-layout.h index 8a15c90..2947764 100644 --- a/include/asm-frv/mem-layout.h +++ b/include/asm-frv/mem-layout.h @@ -35,8 +35,8 @@ * the slab must be aligned such that load- and store-double instructions don't * fault if used */ -#define ARCH_KMALLOC_MINALIGN (sizeof(long) * 2) -#define ARCH_SLAB_MINALIGN (sizeof(long) * 2) +#define ARCH_KMALLOC_MINALIGN 8 +#define ARCH_SLAB_MINALIGN 8 /*****************************************************************************/ /* -- cgit v0.10.2 From 827e609b4581282b98bdf7666f6e93ff1bd1a63e Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 28 May 2008 12:49:56 -0500 Subject: kgdb: use common ascii helpers and put_unaligned_be32 helper Signed-off-by: Harvey Harrison Signed-off-by: Andrew Morton Signed-off-by: Jason Wessel diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index fa39410..2763ae0 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -119,7 +119,6 @@ } while (0) #define MAX_CONFIG_LEN 40 -static const char hexchars[] = "0123456789abcdef"; static struct kgdb_io kgdbts_io_ops; static char get_buf[BUFMAX]; static int get_buf_cnt; @@ -619,8 +618,8 @@ static void fill_get_buf(char *buf) count++; } strcat(get_buf, "#"); - get_buf[count + 2] = hexchars[checksum >> 4]; - get_buf[count + 3] = hexchars[checksum & 0xf]; + get_buf[count + 2] = hex_asc_hi(checksum); + get_buf[count + 3] = hex_asc_lo(checksum); get_buf[count + 4] = '\0'; v2printk("get%i: %s\n", ts.idx, get_buf); } diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 14787de..79e3c90 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -52,6 +52,7 @@ #include #include #include +#include static int kgdb_break_asap; @@ -227,8 +228,6 @@ void __weak kgdb_disable_hw_debug(struct pt_regs *regs) * GDB remote protocol parser: */ -static const char hexchars[] = "0123456789abcdef"; - static int hex(char ch) { if ((ch >= 'a') && (ch <= 'f')) @@ -316,8 +315,8 @@ static void put_packet(char *buffer) } kgdb_io_ops->write_char('#'); - kgdb_io_ops->write_char(hexchars[checksum >> 4]); - kgdb_io_ops->write_char(hexchars[checksum & 0xf]); + kgdb_io_ops->write_char(hex_asc_hi(checksum)); + kgdb_io_ops->write_char(hex_asc_lo(checksum)); if (kgdb_io_ops->flush) kgdb_io_ops->flush(); @@ -478,8 +477,8 @@ static void error_packet(char *pkt, int error) { error = -error; pkt[0] = 'E'; - pkt[1] = hexchars[(error / 10)]; - pkt[2] = hexchars[(error % 10)]; + pkt[1] = hex_asc[(error / 10)]; + pkt[2] = hex_asc[(error % 10)]; pkt[3] = '\0'; } @@ -510,10 +509,7 @@ static void int_to_threadref(unsigned char *id, int value) scan = (unsigned char *)id; while (i--) *scan++ = 0; - *scan++ = (value >> 24) & 0xff; - *scan++ = (value >> 16) & 0xff; - *scan++ = (value >> 8) & 0xff; - *scan++ = (value & 0xff); + put_unaligned_be32(value, scan); } static struct task_struct *getthread(struct pt_regs *regs, int tid) -- cgit v0.10.2 From b33cb815b565a94c654a0fe8e62e36f5b4053888 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Wed, 28 May 2008 12:49:57 -0500 Subject: kgdbts: Use HW breakpoints with CONFIG_DEBUG_RODATA Whenever CONFIG_DEBUG_RODATA is set in the kernel config many kernel text sections become read-only, and the use of software breakpoints in the kgdb tests will cause the kernel to fail to complete the start up. Until such time that there is an official API for modifying read-only text sections hardware breakpoints must be used to run the do_fork or sys_open tests or the tests get skipped. Also fix the duplicated include reported by: Huang Weiyi Signed-off-by: Jason Wessel diff --git a/drivers/misc/kgdbts.c b/drivers/misc/kgdbts.c index 2763ae0..e4ff50b 100644 --- a/drivers/misc/kgdbts.c +++ b/drivers/misc/kgdbts.c @@ -102,7 +102,6 @@ #include #include #include -#include #define v1printk(a...) do { \ if (verbose) \ @@ -130,6 +129,8 @@ static int repeat_test; static int test_complete; static int send_ack; static int final_ack; +static int force_hwbrks; +static int hwbreaks_ok; static int hw_break_val; static int hw_break_val2; #if defined(CONFIG_ARM) || defined(CONFIG_MIPS) || defined(CONFIG_SPARC) @@ -233,12 +234,12 @@ static void break_helper(char *bp_type, char *arg, unsigned long vaddr) static void sw_break(char *arg) { - break_helper("Z0", arg, 0); + break_helper(force_hwbrks ? "Z1" : "Z0", arg, 0); } static void sw_rem_break(char *arg) { - break_helper("z0", arg, 0); + break_helper(force_hwbrks ? "z1" : "z0", arg, 0); } static void hw_break(char *arg) @@ -780,6 +781,8 @@ static void run_breakpoint_test(int is_hw_breakpoint) return; eprintk("kgdbts: ERROR %s test failed\n", ts.name); + if (is_hw_breakpoint) + hwbreaks_ok = 0; } static void run_hw_break_test(int is_write_test) @@ -797,9 +800,11 @@ static void run_hw_break_test(int is_write_test) kgdb_breakpoint(); hw_break_val_access(); if (is_write_test) { - if (test_complete == 2) + if (test_complete == 2) { eprintk("kgdbts: ERROR %s broke on access\n", ts.name); + hwbreaks_ok = 0; + } hw_break_val_write(); } kgdb_breakpoint(); @@ -808,6 +813,7 @@ static void run_hw_break_test(int is_write_test) return; eprintk("kgdbts: ERROR %s test failed\n", ts.name); + hwbreaks_ok = 0; } static void run_nmi_sleep_test(int nmi_sleep) @@ -911,6 +917,7 @@ static void kgdbts_run_tests(void) /* All HW break point tests */ if (arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT) { + hwbreaks_ok = 1; v1printk("kgdbts:RUN hw breakpoint test\n"); run_breakpoint_test(1); v1printk("kgdbts:RUN hw write breakpoint test\n"); @@ -924,6 +931,19 @@ static void kgdbts_run_tests(void) run_nmi_sleep_test(nmi_sleep); } +#ifdef CONFIG_DEBUG_RODATA + /* Until there is an api to write to read-only text segments, use + * HW breakpoints for the remainder of any tests, else print a + * failure message if hw breakpoints do not work. + */ + if (!(arch_kgdb_ops.flags & KGDB_HW_BREAKPOINT && hwbreaks_ok)) { + eprintk("kgdbts: HW breakpoints do not work," + "skipping remaining tests\n"); + return; + } + force_hwbrks = 1; +#endif /* CONFIG_DEBUG_RODATA */ + /* If the do_fork test is run it will be the last test that is * executed because a kernel thread will be spawned at the very * end to unregister the debug hooks. -- cgit v0.10.2 From 471637a575329f9250e7e4099e84084820a35e11 Mon Sep 17 00:00:00 2001 From: Antonio Ospite Date: Wed, 28 May 2008 14:35:52 -0400 Subject: Input: pxa27x_keypad - miscellaneous fixes 1. Set input bits for direct keys codes 2. Set input bits for rotary encoder codes only if rotary encoder is enabled 3. Enable EV_REL only if rotary encoder is enabled and rel_codes are set up Signed-off-by: Antonio Ospite Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/keyboard/pxa27x_keypad.c b/drivers/input/keyboard/pxa27x_keypad.c index 3dea0c5..45767e7 100644 --- a/drivers/input/keyboard/pxa27x_keypad.c +++ b/drivers/input/keyboard/pxa27x_keypad.c @@ -136,6 +136,9 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) set_bit(code, input_dev->keybit); } + for (i = 0; i < pdata->direct_key_num; i++) + set_bit(pdata->direct_key_map[i], input_dev->keybit); + keypad->rotary_up_key[0] = pdata->rotary0_up_key; keypad->rotary_up_key[1] = pdata->rotary1_up_key; keypad->rotary_down_key[0] = pdata->rotary0_down_key; @@ -143,17 +146,21 @@ static void pxa27x_keypad_build_keycode(struct pxa27x_keypad *keypad) keypad->rotary_rel_code[0] = pdata->rotary0_rel_code; keypad->rotary_rel_code[1] = pdata->rotary1_rel_code; - if (pdata->rotary0_up_key && pdata->rotary0_down_key) { - set_bit(pdata->rotary0_up_key, input_dev->keybit); - set_bit(pdata->rotary0_down_key, input_dev->keybit); - } else - set_bit(pdata->rotary0_rel_code, input_dev->relbit); - - if (pdata->rotary1_up_key && pdata->rotary1_down_key) { - set_bit(pdata->rotary1_up_key, input_dev->keybit); - set_bit(pdata->rotary1_down_key, input_dev->keybit); - } else - set_bit(pdata->rotary1_rel_code, input_dev->relbit); + if (pdata->enable_rotary0) { + if (pdata->rotary0_up_key && pdata->rotary0_down_key) { + set_bit(pdata->rotary0_up_key, input_dev->keybit); + set_bit(pdata->rotary0_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary0_rel_code, input_dev->relbit); + } + + if (pdata->enable_rotary1) { + if (pdata->rotary1_up_key && pdata->rotary1_down_key) { + set_bit(pdata->rotary1_up_key, input_dev->keybit); + set_bit(pdata->rotary1_down_key, input_dev->keybit); + } else + set_bit(pdata->rotary1_rel_code, input_dev->relbit); + } } static inline unsigned int lookup_matrix_keycode( @@ -484,8 +491,13 @@ static int __devinit pxa27x_keypad_probe(struct platform_device *pdev) keypad->input_dev = input_dev; input_set_drvdata(input_dev, keypad); - input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP) | - BIT_MASK(EV_REL); + input_dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REP); + if ((keypad->pdata->enable_rotary0 && + keypad->pdata->rotary0_rel_code) || + (keypad->pdata->enable_rotary1 && + keypad->pdata->rotary1_rel_code)) { + input_dev->evbit[0] |= BIT_MASK(EV_REL); + } pxa27x_keypad_build_keycode(keypad); platform_set_drvdata(pdev, keypad); -- cgit v0.10.2 From 6f6c218f68e632e4596cae6e6d43658d26a5e0fe Mon Sep 17 00:00:00 2001 From: "John W. Linville" Date: Tue, 27 May 2008 17:01:55 -0400 Subject: rtl8180: avoid NULL dereference in max2820_rf_set_channel The static function max2820_rf_set_channel is called with conf == NULL within its compilation unit. Originally this defaulted to b/g channel 1, but "cfg80211 API for channels/bitrates, mac80211 and driver conversion" (commit 8318d78a44d49ac1edf2bdec7299de3617c4232e) mistakenly dropped this check. This patch minimally restores the expected behavior. Reported-by: Colin Lai Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c index a34dfd3..a140c80 100644 --- a/drivers/net/wireless/rtl8180_max2820.c +++ b/drivers/net/wireless/rtl8180_max2820.c @@ -78,7 +78,8 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, struct ieee80211_conf *conf) { struct rtl8180_priv *priv = dev->priv; - int channel = ieee80211_frequency_to_channel(conf->channel->center_freq); + int channel = conf ? + ieee80211_frequency_to_channel(conf->channel->center_freq) : 1; unsigned int chan_idx = channel - 1; u32 txpw = priv->channels[chan_idx].hw_value & 0xFF; u32 chan = max2820_chan[chan_idx]; -- cgit v0.10.2 From 0823b2c3c10a4db21cd39a8c72cda96b4dd6d914 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:30:12 +0200 Subject: rtl8180: fix wrong parameter in sa2400_rf_set_channel The sa2400 RF code needs to invoke sa2400_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl8180_sa2400.c b/drivers/net/wireless/rtl8180_sa2400.c index 0311b4e..cea4e0c 100644 --- a/drivers/net/wireless/rtl8180_sa2400.c +++ b/drivers/net/wireless/rtl8180_sa2400.c @@ -86,7 +86,7 @@ static void sa2400_rf_set_channel(struct ieee80211_hw *dev, write_sa2400(dev, 7, txpw); - sa2400_write_phy_antenna(dev, chan); + sa2400_write_phy_antenna(dev, channel); write_sa2400(dev, 0, chan); write_sa2400(dev, 1, 0xbb50); -- cgit v0.10.2 From 0a0ab41e833c8184c6d4ab663f137d5bbd50e049 Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:32:34 +0200 Subject: rtl8180: fix wrong parameter in max2820_rf_set_channel The max2820 RF code needs to invoke max2820_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl8180_max2820.c b/drivers/net/wireless/rtl8180_max2820.c index a140c80..6c825fd 100644 --- a/drivers/net/wireless/rtl8180_max2820.c +++ b/drivers/net/wireless/rtl8180_max2820.c @@ -88,7 +88,7 @@ static void max2820_rf_set_channel(struct ieee80211_hw *dev, * sa2400, for MAXIM we do this directly from BB */ rtl8180_write_phy(dev, 3, txpw); - max2820_write_phy_antenna(dev, chan); + max2820_write_phy_antenna(dev, channel); write_max2820(dev, 3, chan); } -- cgit v0.10.2 From bc1b1fb2753873314ad1bf56bc7d5b8dd447cd2a Mon Sep 17 00:00:00 2001 From: Andrea Merello Date: Sat, 10 May 2008 13:34:16 +0200 Subject: rtl8180: fix wrong parameter in grf5101_rf_set_channel The grf5101 RF code needs to invoke grf5101_write_phy_antenna every time the channel is being switch. This should be done passing the channel number to that function. Incorrectly we were passing the same value that is written on the channel RF register. This may cause problems when operating on ch 14. This patch fixes it. Thanks to Alessandro Di Marco who found this issue! Signed-off-by: Andrea Merello Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtl8180_grf5101.c b/drivers/net/wireless/rtl8180_grf5101.c index 5d47935..947ee55 100644 --- a/drivers/net/wireless/rtl8180_grf5101.c +++ b/drivers/net/wireless/rtl8180_grf5101.c @@ -88,7 +88,7 @@ static void grf5101_rf_set_channel(struct ieee80211_hw *dev, write_grf5101(dev, 0x0B, chan); write_grf5101(dev, 0x07, 0x1000); - grf5101_write_phy_antenna(dev, chan); + grf5101_write_phy_antenna(dev, channel); } static void grf5101_rf_stop(struct ieee80211_hw *dev) -- cgit v0.10.2 From 6b4bec010d888c5b8c731aa596635cd83dd3416c Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Tue, 20 May 2008 12:16:28 +0200 Subject: b43: Upload both beacon templates on initial load This updates the beacon template code to upload both templates, if we never uploaded one before. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index 37783cd..dfa4bdd 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -737,6 +737,7 @@ struct b43_wl { struct ieee80211_tx_control beacon_txctl; bool beacon0_uploaded; bool beacon1_uploaded; + bool beacon_templates_virgin; /* Never wrote the templates? */ struct work_struct beacon_update_trigger; /* The current QOS parameters for the 4 queues. diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 8fdba94..b8e7775 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1544,6 +1544,30 @@ static void b43_write_probe_resp_template(struct b43_wldev *dev, kfree(probe_resp_data); } +static void b43_upload_beacon0(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + + if (wl->beacon0_uploaded) + return; + b43_write_beacon_template(dev, 0x68, 0x18); + /* FIXME: Probe resp upload doesn't really belong here, + * but we don't use that feature anyway. */ + b43_write_probe_resp_template(dev, 0x268, 0x4A, + &__b43_ratetable[3]); + wl->beacon0_uploaded = 1; +} + +static void b43_upload_beacon1(struct b43_wldev *dev) +{ + struct b43_wl *wl = dev->wl; + + if (wl->beacon1_uploaded) + return; + b43_write_beacon_template(dev, 0x468, 0x1A); + wl->beacon1_uploaded = 1; +} + static void handle_irq_beacon(struct b43_wldev *dev) { struct b43_wl *wl = dev->wl; @@ -1568,24 +1592,27 @@ static void handle_irq_beacon(struct b43_wldev *dev) return; } - if (!beacon0_valid) { - if (!wl->beacon0_uploaded) { - b43_write_beacon_template(dev, 0x68, 0x18); - b43_write_probe_resp_template(dev, 0x268, 0x4A, - &__b43_ratetable[3]); - wl->beacon0_uploaded = 1; - } + if (unlikely(wl->beacon_templates_virgin)) { + /* We never uploaded a beacon before. + * Upload both templates now, but only mark one valid. */ + wl->beacon_templates_virgin = 0; + b43_upload_beacon0(dev); + b43_upload_beacon1(dev); cmd = b43_read32(dev, B43_MMIO_MACCMD); cmd |= B43_MACCMD_BEACON0_VALID; b43_write32(dev, B43_MMIO_MACCMD, cmd); - } else if (!beacon1_valid) { - if (!wl->beacon1_uploaded) { - b43_write_beacon_template(dev, 0x468, 0x1A); - wl->beacon1_uploaded = 1; + } else { + if (!beacon0_valid) { + b43_upload_beacon0(dev); + cmd = b43_read32(dev, B43_MMIO_MACCMD); + cmd |= B43_MACCMD_BEACON0_VALID; + b43_write32(dev, B43_MMIO_MACCMD, cmd); + } else if (!beacon1_valid) { + b43_upload_beacon1(dev); + cmd = b43_read32(dev, B43_MMIO_MACCMD); + cmd |= B43_MACCMD_BEACON1_VALID; + b43_write32(dev, B43_MMIO_MACCMD, cmd); } - cmd = b43_read32(dev, B43_MMIO_MACCMD); - cmd |= B43_MACCMD_BEACON1_VALID; - b43_write32(dev, B43_MMIO_MACCMD, cmd); } } @@ -4073,6 +4100,9 @@ static int b43_op_start(struct ieee80211_hw *hw) wl->filter_flags = 0; wl->radiotap_enabled = 0; b43_qos_clear(wl); + wl->beacon0_uploaded = 0; + wl->beacon1_uploaded = 0; + wl->beacon_templates_virgin = 1; /* First register RFkill. * LEDs that are registered later depend on it. */ -- cgit v0.10.2 From 679fda1aa49fddf938bb699df7867c01988371ab Mon Sep 17 00:00:00 2001 From: Nicolas Kaiser Date: Tue, 20 May 2008 18:42:54 +0200 Subject: net/mac80211: always true conditionals Correct always true conditionals. Signed-off-by: Nicolas Kaiser Signed-off-by: John W. Linville diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 699d97b..a9fce4a 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -672,7 +672,7 @@ static int ieee80211_add_station(struct wiphy *wiphy, struct net_device *dev, if (params->vlan) { sdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN || + if (sdata->vif.type != IEEE80211_IF_TYPE_VLAN && sdata->vif.type != IEEE80211_IF_TYPE_AP) return -EINVAL; } else @@ -760,7 +760,7 @@ static int ieee80211_change_station(struct wiphy *wiphy, if (params->vlan && params->vlan != sta->sdata->dev) { vlansdata = IEEE80211_DEV_TO_SUB_IF(params->vlan); - if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN || + if (vlansdata->vif.type != IEEE80211_IF_TYPE_VLAN && vlansdata->vif.type != IEEE80211_IF_TYPE_AP) { rcu_read_unlock(); return -EINVAL; -- cgit v0.10.2 From 167ad6f7a2b2ae58dfaa46620b9b3212594f38e6 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 21 May 2008 18:17:05 +0300 Subject: mac80211: fix ieee80211_rx_bss_put/get imbalance This patch fixes iee80211_rx_bss_put/get imbalance introduced by 'mac80211: enable IBSS merging' patch. Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7cfd12e..0ef5993 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2479,8 +2479,6 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, ifsta->state = IEEE80211_IBSS_JOINED; mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL); - ieee80211_rx_bss_put(dev, bss); - return res; } @@ -3523,6 +3521,7 @@ static int ieee80211_sta_create_ibss(struct net_device *dev, struct ieee80211_supported_band *sband; u8 bssid[ETH_ALEN], *pos; int i; + int ret; DECLARE_MAC_BUF(mac); #if 0 @@ -3567,7 +3566,9 @@ static int ieee80211_sta_create_ibss(struct net_device *dev, *pos++ = (u8) (rate / 5); } - return ieee80211_sta_join_ibss(dev, ifsta, bss); + ret = ieee80211_sta_join_ibss(dev, ifsta, bss); + ieee80211_rx_bss_put(dev, bss); + return ret; } @@ -3615,10 +3616,13 @@ static int ieee80211_sta_find_ibss(struct net_device *dev, (bss = ieee80211_rx_bss_get(dev, bssid, local->hw.conf.channel->center_freq, ifsta->ssid, ifsta->ssid_len))) { + int ret; printk(KERN_DEBUG "%s: Selected IBSS BSSID %s" " based on configured SSID\n", dev->name, print_mac(mac, bssid)); - return ieee80211_sta_join_ibss(dev, ifsta, bss); + ret = ieee80211_sta_join_ibss(dev, ifsta, bss); + ieee80211_rx_bss_put(dev, bss); + return ret; } #ifdef CONFIG_MAC80211_IBSS_DEBUG printk(KERN_DEBUG " did not try to join ibss\n"); -- cgit v0.10.2 From 3bf0a32e22fedc0b46443699db2d61ac2a883ac4 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 22 May 2008 16:32:16 +0200 Subject: b43: Fix controller restart crash This fixes a kernel crash on rmmod, in the case where the controller was restarted before doing the rmmod. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index b8e7775..6c3d9ea 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -4271,7 +4271,9 @@ static void b43_chip_reset(struct work_struct *work) goto out; } } - out: +out: + if (err) + wl->current_dev = NULL; /* Failed to init the dev. */ mutex_unlock(&wl->mutex); if (err) b43err(wl, "Controller restart FAILED\n"); @@ -4412,9 +4414,11 @@ static void b43_one_core_detach(struct ssb_device *dev) struct b43_wldev *wldev; struct b43_wl *wl; + /* Do not cancel ieee80211-workqueue based work here. + * See comment in b43_remove(). */ + wldev = ssb_get_drvdata(dev); wl = wldev->wl; - cancel_work_sync(&wldev->restart_work); b43_debugfs_remove_device(wldev); b43_wireless_core_detach(wldev); list_del(&wldev->list); @@ -4599,6 +4603,10 @@ static void b43_remove(struct ssb_device *dev) struct b43_wl *wl = ssb_get_devtypedata(dev); struct b43_wldev *wldev = ssb_get_drvdata(dev); + /* We must cancel any work here before unregistering from ieee80211, + * as the ieee80211 unreg will destroy the workqueue. */ + cancel_work_sync(&wldev->restart_work); + B43_WARN_ON(!wl); if (wl->current_dev == wldev) ieee80211_unregister_hw(wl->hw); -- cgit v0.10.2 From 9381be059bf5831d259e8735005cfa35b7488543 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Fri, 23 May 2008 01:36:36 +0300 Subject: mac80211: reorder channel and freq reporting in wext scan report This patch switch order of channel and freq (SIOCGIWFREQ) reports in scan results in order to overcome wpa_supplicant inability to handle channel numbers in 5.2Ghz band. Wext reporting channel number is ambiguous as channels 7-12 (802.11j) exist on both bands. Signed-off-by: Tomas Winkler Signed-off-by: Emmanuel Grumbach Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 0ef5993..c29927c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -4099,18 +4099,17 @@ ieee80211_sta_scan_result(struct net_device *dev, memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = bss->freq; - iwe.u.freq.e = 6; + iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq); + iwe.u.freq.e = 0; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); memset(&iwe, 0, sizeof(iwe)); iwe.cmd = SIOCGIWFREQ; - iwe.u.freq.m = ieee80211_frequency_to_channel(bss->freq); - iwe.u.freq.e = 0; + iwe.u.freq.m = bss->freq; + iwe.u.freq.e = 6; current_ev = iwe_stream_add_event(current_ev, end_buf, &iwe, IW_EV_FREQ_LEN); - memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVQUAL; iwe.u.qual.qual = bss->signal; -- cgit v0.10.2 From 0f3e63a55b1a7b695a79bf3eec2ff5ab6b336037 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:41 +0200 Subject: rt2x00: Fix memleak in tx() path When the tx() handler runs while the device has disapeared, we did return NETDEV_TX_OK but didn't free the skb. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index c206b50..87e280a 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -93,6 +93,7 @@ int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb, */ if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) { ieee80211_stop_queues(hw); + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v0.10.2 From 2088d4174e4292aef892bb7095fc3c3ea5bd117c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:49 +0200 Subject: rt2x00: Don't count retries as failure Link quality estimation became quite low for all rt2x00 drivers because the number of retries it took to send the frame were counted as failure. This does not correspond to the legacy driver link quality calculation, by not counting it we will send somewhat more optimistic values to mac80211. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index b22c027..e0767f0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -507,7 +507,7 @@ void rt2x00lib_txdone(struct queue_entry *entry, * Update TX statistics. */ rt2x00dev->link.qual.tx_success += success; - rt2x00dev->link.qual.tx_failed += txdesc->retry + fail; + rt2x00dev->link.qual.tx_failed += fail; /* * Initialize TX status -- cgit v0.10.2 From f06a0f486dc8bbe8808f46b81fbfd73241529fae Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:13:56 +0200 Subject: rt2x00: Reset antenna RSSI after switch When the antenna configuration has changed we should reset the antenna RSSI value. Otherwise the value will be influenced by the previous configuration quality which in turn will affect the antenna diversity. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 57bdc15..611d983 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -328,6 +328,11 @@ static inline int rt2x00_get_link_ant_rssi(struct link *link) return DEFAULT_RSSI; } +static inline void rt2x00_reset_link_ant_rssi(struct link *link) +{ + link->ant.rssi_ant = 0; +} + static inline int rt2x00_get_link_ant_rssi_history(struct link *link, enum antenna ant) { diff --git a/drivers/net/wireless/rt2x00/rt2x00config.c b/drivers/net/wireless/rt2x00/rt2x00config.c index a9930a0..48608e8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00config.c +++ b/drivers/net/wireless/rt2x00/rt2x00config.c @@ -129,6 +129,7 @@ void rt2x00lib_config_antenna(struct rt2x00_dev *rt2x00dev, */ rt2x00dev->ops->lib->config(rt2x00dev, &libconf, CONFIG_UPDATE_ANTENNA); rt2x00lib_reset_link_tuner(rt2x00dev); + rt2x00_reset_link_ant_rssi(&rt2x00dev->link); rt2x00dev->link.ant.active.rx = libconf.ant.rx; rt2x00dev->link.ant.active.tx = libconf.ant.tx; -- cgit v0.10.2 From 633257d3db547e7553500f05e0aa2692c876d7a5 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 23 May 2008 18:14:02 +0200 Subject: rt2x00: Use atomic interface iteration in irq context rt2x00lib_beacondone() is called from interrupt context, this means we cannot use the mac80211 interface iterator that uses the rtnl lock (since that uses a mutex which can sleep). Instead we should use the atomic mac80211 interface iterator. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index e0767f0..2673d56 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -483,9 +483,9 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) return; - ieee80211_iterate_active_interfaces(rt2x00dev->hw, - rt2x00lib_beacondone_iter, - rt2x00dev); + ieee80211_iterate_active_interfaces_atomic(rt2x00dev->hw, + rt2x00lib_beacondone_iter, + rt2x00dev); queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); } -- cgit v0.10.2 From d4231ca3e162387a2b6964dacaa83604e065c4e9 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Fri, 23 May 2008 10:15:26 -0700 Subject: mac80211 : Fixes the status message for iwconfig iwconfig was showing incorrect status messages when disassociated. Patch fixes this by always checking for association status in ioctl calls for getting ap address. Signed-off-by: Abhijeet Kolekar Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 457ebf9..8311bb2 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -489,9 +489,14 @@ static int ieee80211_ioctl_giwap(struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA || sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - ap_addr->sa_family = ARPHRD_ETHER; - memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); - return 0; + if (sdata->u.sta.state == IEEE80211_ASSOCIATED) { + ap_addr->sa_family = ARPHRD_ETHER; + memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); + return 0; + } else { + memset(&ap_addr->sa_data, 0, ETH_ALEN); + return 0; + } } else if (sdata->vif.type == IEEE80211_IF_TYPE_WDS) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(&ap_addr->sa_data, sdata->u.wds.remote_addr, ETH_ALEN); -- cgit v0.10.2 From 4364623cb79d02945ace7a4faa1f11e617dde198 Mon Sep 17 00:00:00 2001 From: Scott Ashcroft Date: Tue, 27 May 2008 00:06:15 +0300 Subject: rndis_wlan: Make connections to TKIP PSK networks work This patch allows the rndis_wlan driver to connect to TKIP PSK networks. It uses the ASSOCIATION_INFORMATION RNDIS call to pull back the IEs and sends them back to userspace using wireless events. Tested on a few wireless networks I have access to. Based on the similar code in ndiswrapper. Signed-off-by: Scott Ashcroft [edit: cleanups] Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index d0b1fb1..ac56f8d 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -116,6 +116,7 @@ MODULE_PARM_DESC(workaround_interval, #define OID_802_11_ENCRYPTION_STATUS ccpu2(0x0d01011b) #define OID_802_11_ADD_KEY ccpu2(0x0d01011d) #define OID_802_11_REMOVE_KEY ccpu2(0x0d01011e) +#define OID_802_11_ASSOCIATION_INFORMATION ccpu2(0x0d01011f) #define OID_802_11_PMKID ccpu2(0x0d010123) #define OID_802_11_NETWORK_TYPES_SUPPORTED ccpu2(0x0d010203) #define OID_802_11_NETWORK_TYPE_IN_USE ccpu2(0x0d010204) @@ -271,6 +272,26 @@ struct ndis_config_param { __le32 value_length; } __attribute__((packed)); +struct ndis_80211_assoc_info { + __le32 length; + __le16 req_ies; + struct req_ie { + __le16 capa; + __le16 listen_interval; + u8 cur_ap_address[6]; + } req_ie; + __le32 req_ie_length; + __le32 offset_req_ies; + __le16 resp_ies; + struct resp_ie { + __le16 capa; + __le16 status_code; + __le16 assoc_id; + } resp_ie; + __le32 resp_ie_length; + __le32 offset_resp_ies; +} __attribute__((packed)); + /* these have to match what is in wpa_supplicant */ enum wpa_alg { WPA_ALG_NONE, WPA_ALG_WEP, WPA_ALG_TKIP, WPA_ALG_CCMP }; enum wpa_cipher { CIPHER_NONE, CIPHER_WEP40, CIPHER_TKIP, CIPHER_CCMP, @@ -674,6 +695,12 @@ static int get_bssid(struct usbnet *usbdev, u8 bssid[ETH_ALEN]) return ret; } +static int get_association_info(struct usbnet *usbdev, + struct ndis_80211_assoc_info *info, int len) +{ + return rndis_query_oid(usbdev, OID_802_11_ASSOCIATION_INFORMATION, + info, &len); +} static int is_associated(struct usbnet *usbdev) { @@ -2182,11 +2209,40 @@ static void rndis_wext_worker(struct work_struct *work) struct usbnet *usbdev = priv->usbdev; union iwreq_data evt; unsigned char bssid[ETH_ALEN]; - int ret; + struct ndis_80211_assoc_info *info; + int assoc_size = sizeof(*info) + IW_CUSTOM_MAX + 32; + int ret, offset; if (test_and_clear_bit(WORK_CONNECTION_EVENT, &priv->work_pending)) { - ret = get_bssid(usbdev, bssid); + info = kzalloc(assoc_size, GFP_KERNEL); + if (!info) + goto get_bssid; + /* Get association info IEs from device and send them back to + * userspace. */ + ret = get_association_info(usbdev, info, assoc_size); + if (!ret) { + evt.data.length = le32_to_cpu(info->req_ie_length); + if (evt.data.length > 0) { + offset = le32_to_cpu(info->offset_req_ies); + wireless_send_event(usbdev->net, + IWEVASSOCREQIE, &evt, + (char *)info + offset); + } + + evt.data.length = le32_to_cpu(info->resp_ie_length); + if (evt.data.length > 0) { + offset = le32_to_cpu(info->offset_resp_ies); + wireless_send_event(usbdev->net, + IWEVASSOCRESPIE, &evt, + (char *)info + offset); + } + } + + kfree(info); + +get_bssid: + ret = get_bssid(usbdev, bssid); if (!ret) { evt.data.flags = 0; evt.data.length = 0; -- cgit v0.10.2 From 47cfd463962ab0748ecbad761ff6ef2916b54aac Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Tue, 27 May 2008 11:29:34 +0800 Subject: iwlwifi: fix exit from stay_in_table state When exiting from stay in table state (e.g. timer expiration), all the statistics are reset and the RS flow should not continue but only after enough statistics are collected again. Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index c9847b1..02c4073 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -2009,7 +2009,7 @@ static void rs_rate_scale_perform(struct iwl_priv *priv, * 2) Not just finishing up a search * 3) Allowing a new search */ - if (!update_lq && !done_search && !lq_sta->stay_in_tbl) { + if (!update_lq && !done_search && !lq_sta->stay_in_tbl && window->counter) { /* Save current throughput to compare with "search" throughput*/ lq_sta->last_tpt = current_tpt; -- cgit v0.10.2 From 135a5484c3e0c6710035630b630cef3c856b78e2 Mon Sep 17 00:00:00 2001 From: Guy Cohen Date: Tue, 27 May 2008 11:29:35 +0800 Subject: iwlwifi: fix rate scale TLC column selection bug This patch fixes a case that a wrong maximal rate is selected when searching for better configurations. Signed-off-by: Guy Cohen Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c index 02c4073..3a7f0cb 100644 --- a/drivers/net/wireless/iwlwifi/iwl-4965-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-4965-rs.c @@ -1162,7 +1162,6 @@ static s32 rs_get_best_rate(struct iwl_priv *priv, /* Higher rate not available, use the original */ } else { - new_rate = rate; break; } } -- cgit v0.10.2 From a7624837261b55259d4a88309fd88529643fbb80 Mon Sep 17 00:00:00 2001 From: Jussi Kivilinna Date: Tue, 27 May 2008 11:15:08 +0300 Subject: rndis_wlan: add missing range check for power_output modparam Range check for power_output were missing. Signed-off-by: Jussi Kivilinna Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index ac56f8d..18c9931 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2470,6 +2470,11 @@ static int bcm4320_early_init(struct usbnet *dev) else if (priv->param_power_save > 2) priv->param_power_save = 2; + if (priv->param_power_output < 0) + priv->param_power_output = 0; + else if (priv->param_power_output > 3) + priv->param_power_output = 3; + if (priv->param_roamtrigger < -80) priv->param_roamtrigger = -80; else if (priv->param_roamtrigger > -60) -- cgit v0.10.2 From f6d97104890203ba9c2cf8e34894c4c8e64cb880 Mon Sep 17 00:00:00 2001 From: Yi Zhu Date: Tue, 27 May 2008 17:50:50 +0300 Subject: mac80211: fix a typo in ieee80211_handle_filtered_frame comment fix a typo in ieee80211_handle_filtered_frame comment Signed-off-by: Yi Zhu Signed-off-by: John W. Linville diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 915afad..5c87645 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -1313,7 +1313,7 @@ static void ieee80211_handle_filtered_frame(struct ieee80211_local *local, /* * Clear the TX filter mask for this STA when sending the next * packet. If the STA went to power save mode, this will happen - * happen when it wakes up for the next time. + * when it wakes up for the next time. */ sta->flags |= WLAN_STA_CLEAR_PS_FILT; -- cgit v0.10.2 From 70d251b24c44ab2fcba1807a5206e844cf10eb38 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 28 May 2008 20:08:12 +0530 Subject: mac80211: Fix for NULL pointer dereference in sta_info_get() This addresses a NULL pointer dereference in sta_info_get(). TID and sta_info are extracted in ADDBA Timer expiry function through the timer handler's argument. The problem is extracging the TID (which was stored in timer_to_tid[] array of type "u8") through "int *" typecast which may also yield unwanted bytes for the MSB of TID that results in incorrect sta_info and ieee80211_local pointers. ieee80211_local pointer is NULL as illustrated below, it crashes in sta_info_get(). The problem started when extracting ieee80211_local pointer out of sta_info iteself and eventually crashed in stat_info_get(). The proper way to fix is to change the data type of TID to u8 instead of u16. However changing all the occurences requires some prototype changes as well. We should fix this in upcoming patches. Signed-off-by: Senthil Balasubramanian Signed-off-by: Luis Rodriguez Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c29927c..33a356e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1614,7 +1614,7 @@ void sta_addba_resp_timer_expired(unsigned long data) * only one argument, and both sta_info and TID are needed, so init * flow in sta_info_create gives the TID as data, while the timer_to_id * array gives the sta through container_of */ - u16 tid = *(int *)data; + u16 tid = *(u8 *)data; struct sta_info *temp_sta = container_of((void *)data, struct sta_info, timer_to_tid[tid]); @@ -1662,7 +1662,7 @@ timer_expired_exit: void sta_rx_agg_session_timer_expired(unsigned long data) { /* not an elegant detour, but there is no choice as the timer passes - * only one argument, and verious sta_info are needed here, so init + * only one argument, and various sta_info are needed here, so init * flow in sta_info_create gives the TID as data, while the timer_to_id * array gives the sta through container_of */ u8 *ptid = (u8 *)data; -- cgit v0.10.2 From c97c23e38625f59e3e9869664eeeb0cab1822948 Mon Sep 17 00:00:00 2001 From: Senthil Balasubramanian Date: Wed, 28 May 2008 23:15:32 +0530 Subject: mac80211: fix alignment issue with compare_ether_addr() This addresses an alignment issue with compare_ether_addr(). The addresses passed to compare_ether_addr should be two bytes aligned. It may function properly in x86 platform. However may not work properly on IA-64 or ARM processor. This also fixes a typo in mlme.c where the sk_buff struct name is incorect. Though sizeof() works for any incorrect structure pointer name as its just a pointer length that we want, lets just fix it. Signed-off-by: Senthil Balasubramanian Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 33a356e..841278f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1325,7 +1325,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, /* prepare reordering buffer */ tid_agg_rx->reorder_buf = - kmalloc(buf_size * sizeof(struct sk_buf *), GFP_ATOMIC); + kmalloc(buf_size * sizeof(struct sk_buff *), GFP_ATOMIC); if (!tid_agg_rx->reorder_buf) { if (net_ratelimit()) printk(KERN_ERR "can not allocate reordering buffer " @@ -1334,7 +1334,7 @@ static void ieee80211_sta_process_addba_request(struct net_device *dev, goto end; } memset(tid_agg_rx->reorder_buf, 0, - buf_size * sizeof(struct sk_buf *)); + buf_size * sizeof(struct sk_buff *)); if (local->ops->ampdu_action) ret = local->ops->ampdu_action(hw, IEEE80211_AMPDU_RX_START, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1958bfb3..0941e5d 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -1091,7 +1091,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx) u16 fc, hdrlen, ethertype; u8 *payload; u8 dst[ETH_ALEN]; - u8 src[ETH_ALEN]; + u8 src[ETH_ALEN] __aligned(2); struct sk_buff *skb = rx->skb; struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); DECLARE_MAC_BUF(mac); @@ -1234,7 +1234,7 @@ ieee80211_data_to_8023(struct ieee80211_rx_data *rx) */ static bool ieee80211_frame_allowed(struct ieee80211_rx_data *rx) { - static const u8 pae_group_addr[ETH_ALEN] + static const u8 pae_group_addr[ETH_ALEN] __aligned(2) = { 0x01, 0x80, 0xC2, 0x00, 0x00, 0x03 }; struct ethhdr *ehdr = (struct ethhdr *) rx->skb->data; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 131e9e6..4e97b26 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -34,11 +34,11 @@ void *mac80211_wiphy_privid = &mac80211_wiphy_privid; /* See IEEE 802.1H for LLC/SNAP encapsulation/decapsulation */ /* Ethernet-II snap header (RFC1042 for most EtherTypes) */ -const unsigned char rfc1042_header[] = +const unsigned char rfc1042_header[] __aligned(2) = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0x00 }; /* Bridge-Tunnel header (for EtherTypes ETH_P_AARP and ETH_P_IPX) */ -const unsigned char bridge_tunnel_header[] = +const unsigned char bridge_tunnel_header[] __aligned(2) = { 0xaa, 0xaa, 0x03, 0x00, 0x00, 0xf8 }; -- cgit v0.10.2 From 4c8411f8c115def968820a4df6658ccfd55d7f1a Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Thu, 29 May 2008 01:32:47 -0700 Subject: bluetooth: fix locking bug in the rfcomm socket cleanup handling in net/bluetooth/rfcomm/sock.c, rfcomm_sk_state_change() does the following operation: if (parent && sock_flag(sk, SOCK_ZAPPED)) { /* We have to drop DLC lock here, otherwise * rfcomm_sock_destruct() will dead lock. */ rfcomm_dlc_unlock(d); rfcomm_sock_kill(sk); rfcomm_dlc_lock(d); } } which is fine, since rfcomm_sock_kill() will call sk_free() which will call rfcomm_sock_destruct() which takes the rfcomm_dlc_lock()... so far so good. HOWEVER, this assumes that the rfcomm_sk_state_change() function always gets called with the rfcomm_dlc_lock() taken. This is the case for all but one case, and in that case where we don't have the lock, we do a double unlock followed by an attempt to take the lock, which due to underflow isn't going anywhere fast. This patch fixes this by moving the stragling case inside the lock, like the other usages of the same call are doing in this code. This was found with the help of the www.kerneloops.org project, where this deadlock was observed 51 times at this point in time: http://www.kerneloops.org/search.php?search=rfcomm_sock_destruct Signed-off-by: Arjan van de Ven Acked-by: Marcel Holtmann Signed-off-by: David S. Miller diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c index eb62558..0c2c937 100644 --- a/net/bluetooth/rfcomm/core.c +++ b/net/bluetooth/rfcomm/core.c @@ -423,8 +423,8 @@ static int __rfcomm_dlc_close(struct rfcomm_dlc *d, int err) rfcomm_dlc_lock(d); d->state = BT_CLOSED; - rfcomm_dlc_unlock(d); d->state_change(d, err); + rfcomm_dlc_unlock(d); skb_queue_purge(&d->tx_queue); rfcomm_dlc_unlink(d); -- cgit v0.10.2 From f9305d4a0968201b2818dbed0dc8cb0d4ee7aeb3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 29 May 2008 11:23:17 +0200 Subject: revert ("sched: fair: weight calculations") Yanmin Zhang reported: Comparing with kernel 2.6.25, sysbench+mysql(oltp, readonly) has many regressions with 2.6.26-rc1: 1) 8-core stoakley: 28%; 2) 16-core tigerton: 20%; 3) Itanium Montvale: 50%. Bisect located this patch: | 8f1bc385cfbab474db6c27b5af1e439614f3025c is first bad commit | commit 8f1bc385cfbab474db6c27b5af1e439614f3025c | Author: Peter Zijlstra | Date: Sat Apr 19 19:45:00 2008 +0200 | | sched: fair: weight calculations Revert it to the 2.6.25 state. Bisected-by: Yanmin Zhang Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index cfa222a..4aac8aa 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1368,9 +1368,6 @@ static void __resched_task(struct task_struct *p, int tif_bit) */ #define SRR(x, y) (((x) + (1UL << ((y) - 1))) >> (y)) -/* - * delta *= weight / lw - */ static unsigned long calc_delta_mine(unsigned long delta_exec, unsigned long weight, struct load_weight *lw) @@ -1393,6 +1390,12 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight, return (unsigned long)min(tmp, (u64)(unsigned long)LONG_MAX); } +static inline unsigned long +calc_delta_fair(unsigned long delta_exec, struct load_weight *lw) +{ + return calc_delta_mine(delta_exec, NICE_0_LOAD, lw); +} + static inline void update_load_add(struct load_weight *lw, unsigned long inc) { lw->weight += inc; diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index e24ecd3..0eb0ae8 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -334,34 +334,6 @@ int sched_nr_latency_handler(struct ctl_table *table, int write, #endif /* - * delta *= w / rw - */ -static inline unsigned long -calc_delta_weight(unsigned long delta, struct sched_entity *se) -{ - for_each_sched_entity(se) { - delta = calc_delta_mine(delta, - se->load.weight, &cfs_rq_of(se)->load); - } - - return delta; -} - -/* - * delta *= rw / w - */ -static inline unsigned long -calc_delta_fair(unsigned long delta, struct sched_entity *se) -{ - for_each_sched_entity(se) { - delta = calc_delta_mine(delta, - cfs_rq_of(se)->load.weight, &se->load); - } - - return delta; -} - -/* * The idea is to set a period in which each task runs once. * * When there are too many tasks (sysctl_sched_nr_latency) we have to stretch @@ -390,54 +362,47 @@ static u64 __sched_period(unsigned long nr_running) */ static u64 sched_slice(struct cfs_rq *cfs_rq, struct sched_entity *se) { - return calc_delta_weight(__sched_period(cfs_rq->nr_running), se); + u64 slice = __sched_period(cfs_rq->nr_running); + + for_each_sched_entity(se) { + cfs_rq = cfs_rq_of(se); + + slice *= se->load.weight; + do_div(slice, cfs_rq->load.weight); + } + + + return slice; } /* * We calculate the vruntime slice of a to be inserted task * - * vs = s*rw/w = p + * vs = s/w = p/rw */ static u64 sched_vslice_add(struct cfs_rq *cfs_rq, struct sched_entity *se) { unsigned long nr_running = cfs_rq->nr_running; + unsigned long weight; + u64 vslice; if (!se->on_rq) nr_running++; - return __sched_period(nr_running); -} - -/* - * The goal of calc_delta_asym() is to be asymmetrically around NICE_0_LOAD, in - * that it favours >=0 over <0. - * - * -20 | - * | - * 0 --------+------- - * .' - * 19 .' - * - */ -static unsigned long -calc_delta_asym(unsigned long delta, struct sched_entity *se) -{ - struct load_weight lw = { - .weight = NICE_0_LOAD, - .inv_weight = 1UL << (WMULT_SHIFT-NICE_0_SHIFT) - }; + vslice = __sched_period(nr_running); for_each_sched_entity(se) { - struct load_weight *se_lw = &se->load; + cfs_rq = cfs_rq_of(se); - if (se->load.weight < NICE_0_LOAD) - se_lw = &lw; + weight = cfs_rq->load.weight; + if (!se->on_rq) + weight += se->load.weight; - delta = calc_delta_mine(delta, - cfs_rq_of(se)->load.weight, se_lw); + vslice *= NICE_0_LOAD; + do_div(vslice, weight); } - return delta; + return vslice; } /* @@ -454,7 +419,11 @@ __update_curr(struct cfs_rq *cfs_rq, struct sched_entity *curr, curr->sum_exec_runtime += delta_exec; schedstat_add(cfs_rq, exec_clock, delta_exec); - delta_exec_weighted = calc_delta_fair(delta_exec, curr); + delta_exec_weighted = delta_exec; + if (unlikely(curr->load.weight != NICE_0_LOAD)) { + delta_exec_weighted = calc_delta_fair(delta_exec_weighted, + &curr->load); + } curr->vruntime += delta_exec_weighted; } @@ -661,17 +630,8 @@ place_entity(struct cfs_rq *cfs_rq, struct sched_entity *se, int initial) if (!initial) { /* sleeps upto a single latency don't count. */ - if (sched_feat(NEW_FAIR_SLEEPERS)) { - unsigned long thresh = sysctl_sched_latency; - - /* - * convert the sleeper threshold into virtual time - */ - if (sched_feat(NORMALIZED_SLEEPER)) - thresh = calc_delta_fair(thresh, se); - - vruntime -= thresh; - } + if (sched_feat(NEW_FAIR_SLEEPERS)) + vruntime -= sysctl_sched_latency; /* ensure we never gain time by being placed backwards. */ vruntime = max_vruntime(se->vruntime, vruntime); @@ -1169,10 +1129,11 @@ static unsigned long wakeup_gran(struct sched_entity *se) unsigned long gran = sysctl_sched_wakeup_granularity; /* - * More easily preempt - nice tasks, while not making it harder for - * + nice tasks. + * More easily preempt - nice tasks, while not making + * it harder for + nice tasks. */ - gran = calc_delta_asym(sysctl_sched_wakeup_granularity, se); + if (unlikely(se->load.weight > NICE_0_LOAD)) + gran = calc_delta_fair(gran, &se->load); return gran; } -- cgit v0.10.2 From 3f33a7ce9567ded582af1ab71f9802165fe12f09 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Tue, 13 May 2008 23:44:11 +0200 Subject: sched: unite unlikely pairs in rt_policy() and schedule_debug() Removes obfuscation and may improve assembly. Signed-off-by: Roel Kluin Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 4aac8aa..9701735 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -136,7 +136,7 @@ static inline void sg_inc_cpu_power(struct sched_group *sg, u32 val) static inline int rt_policy(int policy) { - if (unlikely(policy == SCHED_FIFO) || unlikely(policy == SCHED_RR)) + if (unlikely(policy == SCHED_FIFO || policy == SCHED_RR)) return 1; return 0; } @@ -4433,7 +4433,7 @@ static inline void schedule_debug(struct task_struct *prev) * schedule() atomically, we ignore that path for now. * Otherwise, whine if we are scheduling when we should not be. */ - if (unlikely(in_atomic_preempt_off()) && unlikely(!prev->exit_state)) + if (unlikely(in_atomic_preempt_off() && !prev->exit_state)) __schedule_bug(prev); profile_hit(SCHED_PROFILING, __builtin_return_address(0)); -- cgit v0.10.2 From c6fba5451a84143f34056a465e72ba187fcc651c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 14 May 2008 16:22:59 -0700 Subject: show_schedstat(): fix memleak The Coverity checker spotted a memleak introduced by commit 39106dcf85285e78f3b290022122c76f851379b8 (cpumask: use new cpus_scnprintf function). It seems the kfree() got lost between v2 and v3 of this patch... Signed-off-by: Adrian Bunk Cc: Mike Travis Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index 5bae2e0..a38878e 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -67,6 +67,7 @@ static int show_schedstat(struct seq_file *seq, void *v) preempt_enable(); #endif } + kfree(mask_str); return 0; } -- cgit v0.10.2 From 4285f594f84d1f0641fc962d00e6638dec4a19c4 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 16 May 2008 17:47:14 +0200 Subject: sched: cleanup Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 9701735..3dc13f0 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7571,8 +7571,8 @@ static int build_sched_domains(const cpumask_t *cpu_map) static cpumask_t *doms_cur; /* current sched domains */ static int ndoms_cur; /* number of sched domains in 'doms_cur' */ -static struct sched_domain_attr *dattr_cur; /* attribues of custom domains - in 'doms_cur' */ +static struct sched_domain_attr *dattr_cur; + /* attribues of custom domains in 'doms_cur' */ /* * Special case: If a kmalloc of a doms_cur partition (array of -- cgit v0.10.2 From 6363ca57c76b7b83639ca8c83fc285fa26a7880e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 29 May 2008 11:28:57 +0200 Subject: revert ("sched: fair-group: SMP-nice for group scheduling") Yanmin Zhang reported: Comparing with 2.6.25, volanoMark has big regression with kernel 2.6.26-rc1. It's about 50% on my 8-core stoakley, 16-core tigerton, and Itanium Montecito. With bisect, I located the following patch: | 18d95a2832c1392a2d63227a7a6d433cb9f2037e is first bad commit | commit 18d95a2832c1392a2d63227a7a6d433cb9f2037e | Author: Peter Zijlstra | Date: Sat Apr 19 19:45:00 2008 +0200 | | sched: fair-group: SMP-nice for group scheduling Revert it so that we get v2.6.25 behavior. Bisected-by: Yanmin Zhang Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index 5395a61..8a88849 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -766,7 +766,6 @@ struct sched_domain { struct sched_domain *child; /* bottom domain must be null terminated */ struct sched_group *groups; /* the balancing groups of the domain */ cpumask_t span; /* span of all CPUs in this domain */ - int first_cpu; /* cache of the first cpu in this domain */ unsigned long min_interval; /* Minimum balance interval ms */ unsigned long max_interval; /* Maximum balance interval ms */ unsigned int busy_factor; /* less balancing by factor if busy */ diff --git a/kernel/sched.c b/kernel/sched.c index 3dc13f0..bfb8ad8 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -398,43 +398,6 @@ struct cfs_rq { */ struct list_head leaf_cfs_rq_list; struct task_group *tg; /* group that "owns" this runqueue */ - -#ifdef CONFIG_SMP - unsigned long task_weight; - unsigned long shares; - /* - * We need space to build a sched_domain wide view of the full task - * group tree, in order to avoid depending on dynamic memory allocation - * during the load balancing we place this in the per cpu task group - * hierarchy. This limits the load balancing to one instance per cpu, - * but more should not be needed anyway. - */ - struct aggregate_struct { - /* - * load = weight(cpus) * f(tg) - * - * Where f(tg) is the recursive weight fraction assigned to - * this group. - */ - unsigned long load; - - /* - * part of the group weight distributed to this span. - */ - unsigned long shares; - - /* - * The sum of all runqueue weights within this span. - */ - unsigned long rq_weight; - - /* - * Weight contributed by tasks; this is the part we can - * influence by moving tasks around. - */ - unsigned long task_weight; - } aggregate; -#endif #endif }; @@ -1508,326 +1471,6 @@ static unsigned long source_load(int cpu, int type); static unsigned long target_load(int cpu, int type); static unsigned long cpu_avg_load_per_task(int cpu); static int task_hot(struct task_struct *p, u64 now, struct sched_domain *sd); - -#ifdef CONFIG_FAIR_GROUP_SCHED - -/* - * Group load balancing. - * - * We calculate a few balance domain wide aggregate numbers; load and weight. - * Given the pictures below, and assuming each item has equal weight: - * - * root 1 - thread - * / | \ A - group - * A 1 B - * /|\ / \ - * C 2 D 3 4 - * | | - * 5 6 - * - * load: - * A and B get 1/3-rd of the total load. C and D get 1/3-rd of A's 1/3-rd, - * which equals 1/9-th of the total load. - * - * shares: - * The weight of this group on the selected cpus. - * - * rq_weight: - * Direct sum of all the cpu's their rq weight, e.g. A would get 3 while - * B would get 2. - * - * task_weight: - * Part of the rq_weight contributed by tasks; all groups except B would - * get 1, B gets 2. - */ - -static inline struct aggregate_struct * -aggregate(struct task_group *tg, struct sched_domain *sd) -{ - return &tg->cfs_rq[sd->first_cpu]->aggregate; -} - -typedef void (*aggregate_func)(struct task_group *, struct sched_domain *); - -/* - * Iterate the full tree, calling @down when first entering a node and @up when - * leaving it for the final time. - */ -static -void aggregate_walk_tree(aggregate_func down, aggregate_func up, - struct sched_domain *sd) -{ - struct task_group *parent, *child; - - rcu_read_lock(); - parent = &root_task_group; -down: - (*down)(parent, sd); - list_for_each_entry_rcu(child, &parent->children, siblings) { - parent = child; - goto down; - -up: - continue; - } - (*up)(parent, sd); - - child = parent; - parent = parent->parent; - if (parent) - goto up; - rcu_read_unlock(); -} - -/* - * Calculate the aggregate runqueue weight. - */ -static -void aggregate_group_weight(struct task_group *tg, struct sched_domain *sd) -{ - unsigned long rq_weight = 0; - unsigned long task_weight = 0; - int i; - - for_each_cpu_mask(i, sd->span) { - rq_weight += tg->cfs_rq[i]->load.weight; - task_weight += tg->cfs_rq[i]->task_weight; - } - - aggregate(tg, sd)->rq_weight = rq_weight; - aggregate(tg, sd)->task_weight = task_weight; -} - -/* - * Compute the weight of this group on the given cpus. - */ -static -void aggregate_group_shares(struct task_group *tg, struct sched_domain *sd) -{ - unsigned long shares = 0; - int i; - - for_each_cpu_mask(i, sd->span) - shares += tg->cfs_rq[i]->shares; - - if ((!shares && aggregate(tg, sd)->rq_weight) || shares > tg->shares) - shares = tg->shares; - - aggregate(tg, sd)->shares = shares; -} - -/* - * Compute the load fraction assigned to this group, relies on the aggregate - * weight and this group's parent's load, i.e. top-down. - */ -static -void aggregate_group_load(struct task_group *tg, struct sched_domain *sd) -{ - unsigned long load; - - if (!tg->parent) { - int i; - - load = 0; - for_each_cpu_mask(i, sd->span) - load += cpu_rq(i)->load.weight; - - } else { - load = aggregate(tg->parent, sd)->load; - - /* - * shares is our weight in the parent's rq so - * shares/parent->rq_weight gives our fraction of the load - */ - load *= aggregate(tg, sd)->shares; - load /= aggregate(tg->parent, sd)->rq_weight + 1; - } - - aggregate(tg, sd)->load = load; -} - -static void __set_se_shares(struct sched_entity *se, unsigned long shares); - -/* - * Calculate and set the cpu's group shares. - */ -static void -__update_group_shares_cpu(struct task_group *tg, struct sched_domain *sd, - int tcpu) -{ - int boost = 0; - unsigned long shares; - unsigned long rq_weight; - - if (!tg->se[tcpu]) - return; - - rq_weight = tg->cfs_rq[tcpu]->load.weight; - - /* - * If there are currently no tasks on the cpu pretend there is one of - * average load so that when a new task gets to run here it will not - * get delayed by group starvation. - */ - if (!rq_weight) { - boost = 1; - rq_weight = NICE_0_LOAD; - } - - /* - * \Sum shares * rq_weight - * shares = ----------------------- - * \Sum rq_weight - * - */ - shares = aggregate(tg, sd)->shares * rq_weight; - shares /= aggregate(tg, sd)->rq_weight + 1; - - /* - * record the actual number of shares, not the boosted amount. - */ - tg->cfs_rq[tcpu]->shares = boost ? 0 : shares; - - if (shares < MIN_SHARES) - shares = MIN_SHARES; - else if (shares > MAX_SHARES) - shares = MAX_SHARES; - - __set_se_shares(tg->se[tcpu], shares); -} - -/* - * Re-adjust the weights on the cpu the task came from and on the cpu the - * task went to. - */ -static void -__move_group_shares(struct task_group *tg, struct sched_domain *sd, - int scpu, int dcpu) -{ - unsigned long shares; - - shares = tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares; - - __update_group_shares_cpu(tg, sd, scpu); - __update_group_shares_cpu(tg, sd, dcpu); - - /* - * ensure we never loose shares due to rounding errors in the - * above redistribution. - */ - shares -= tg->cfs_rq[scpu]->shares + tg->cfs_rq[dcpu]->shares; - if (shares) - tg->cfs_rq[dcpu]->shares += shares; -} - -/* - * Because changing a group's shares changes the weight of the super-group - * we need to walk up the tree and change all shares until we hit the root. - */ -static void -move_group_shares(struct task_group *tg, struct sched_domain *sd, - int scpu, int dcpu) -{ - while (tg) { - __move_group_shares(tg, sd, scpu, dcpu); - tg = tg->parent; - } -} - -static -void aggregate_group_set_shares(struct task_group *tg, struct sched_domain *sd) -{ - unsigned long shares = aggregate(tg, sd)->shares; - int i; - - for_each_cpu_mask(i, sd->span) { - struct rq *rq = cpu_rq(i); - unsigned long flags; - - spin_lock_irqsave(&rq->lock, flags); - __update_group_shares_cpu(tg, sd, i); - spin_unlock_irqrestore(&rq->lock, flags); - } - - aggregate_group_shares(tg, sd); - - /* - * ensure we never loose shares due to rounding errors in the - * above redistribution. - */ - shares -= aggregate(tg, sd)->shares; - if (shares) { - tg->cfs_rq[sd->first_cpu]->shares += shares; - aggregate(tg, sd)->shares += shares; - } -} - -/* - * Calculate the accumulative weight and recursive load of each task group - * while walking down the tree. - */ -static -void aggregate_get_down(struct task_group *tg, struct sched_domain *sd) -{ - aggregate_group_weight(tg, sd); - aggregate_group_shares(tg, sd); - aggregate_group_load(tg, sd); -} - -/* - * Rebalance the cpu shares while walking back up the tree. - */ -static -void aggregate_get_up(struct task_group *tg, struct sched_domain *sd) -{ - aggregate_group_set_shares(tg, sd); -} - -static DEFINE_PER_CPU(spinlock_t, aggregate_lock); - -static void __init init_aggregate(void) -{ - int i; - - for_each_possible_cpu(i) - spin_lock_init(&per_cpu(aggregate_lock, i)); -} - -static int get_aggregate(struct sched_domain *sd) -{ - if (!spin_trylock(&per_cpu(aggregate_lock, sd->first_cpu))) - return 0; - - aggregate_walk_tree(aggregate_get_down, aggregate_get_up, sd); - return 1; -} - -static void put_aggregate(struct sched_domain *sd) -{ - spin_unlock(&per_cpu(aggregate_lock, sd->first_cpu)); -} - -static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) -{ - cfs_rq->shares = shares; -} - -#else - -static inline void init_aggregate(void) -{ -} - -static inline int get_aggregate(struct sched_domain *sd) -{ - return 0; -} - -static inline void put_aggregate(struct sched_domain *sd) -{ -} -#endif - #else /* CONFIG_SMP */ #ifdef CONFIG_FAIR_GROUP_SCHED @@ -1848,14 +1491,26 @@ static void cfs_rq_set_shares(struct cfs_rq *cfs_rq, unsigned long shares) #define sched_class_highest (&rt_sched_class) -static void inc_nr_running(struct rq *rq) +static inline void inc_load(struct rq *rq, const struct task_struct *p) +{ + update_load_add(&rq->load, p->se.load.weight); +} + +static inline void dec_load(struct rq *rq, const struct task_struct *p) +{ + update_load_sub(&rq->load, p->se.load.weight); +} + +static void inc_nr_running(struct task_struct *p, struct rq *rq) { rq->nr_running++; + inc_load(rq, p); } -static void dec_nr_running(struct rq *rq) +static void dec_nr_running(struct task_struct *p, struct rq *rq) { rq->nr_running--; + dec_load(rq, p); } static void set_load_weight(struct task_struct *p) @@ -1947,7 +1602,7 @@ static void activate_task(struct rq *rq, struct task_struct *p, int wakeup) rq->nr_uninterruptible--; enqueue_task(rq, p, wakeup); - inc_nr_running(rq); + inc_nr_running(p, rq); } /* @@ -1959,7 +1614,7 @@ static void deactivate_task(struct rq *rq, struct task_struct *p, int sleep) rq->nr_uninterruptible++; dequeue_task(rq, p, sleep); - dec_nr_running(rq); + dec_nr_running(p, rq); } /** @@ -2612,7 +2267,7 @@ void wake_up_new_task(struct task_struct *p, unsigned long clone_flags) * management (if any): */ p->sched_class->task_new(rq, p); - inc_nr_running(rq); + inc_nr_running(p, rq); } check_preempt_curr(rq, p); #ifdef CONFIG_SMP @@ -3603,12 +3258,9 @@ static int load_balance(int this_cpu, struct rq *this_rq, unsigned long imbalance; struct rq *busiest; unsigned long flags; - int unlock_aggregate; cpus_setall(*cpus); - unlock_aggregate = get_aggregate(sd); - /* * When power savings policy is enabled for the parent domain, idle * sibling can pick up load irrespective of busy siblings. In this case, @@ -3724,9 +3376,8 @@ redo: if (!ld_moved && !sd_idle && sd->flags & SD_SHARE_CPUPOWER && !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) - ld_moved = -1; - - goto out; + return -1; + return ld_moved; out_balanced: schedstat_inc(sd, lb_balanced[idle]); @@ -3741,13 +3392,8 @@ out_one_pinned: if (!sd_idle && sd->flags & SD_SHARE_CPUPOWER && !test_sd_parent(sd, SD_POWERSAVINGS_BALANCE)) - ld_moved = -1; - else - ld_moved = 0; -out: - if (unlock_aggregate) - put_aggregate(sd); - return ld_moved; + return -1; + return 0; } /* @@ -4934,8 +4580,10 @@ void set_user_nice(struct task_struct *p, long nice) goto out_unlock; } on_rq = p->se.on_rq; - if (on_rq) + if (on_rq) { dequeue_task(rq, p, 0); + dec_load(rq, p); + } p->static_prio = NICE_TO_PRIO(nice); set_load_weight(p); @@ -4945,6 +4593,7 @@ void set_user_nice(struct task_struct *p, long nice) if (on_rq) { enqueue_task(rq, p, 0); + inc_load(rq, p); /* * If the task increased its priority or is running and * lowered its priority, then reschedule its CPU: @@ -7319,7 +6968,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, ALLNODES); set_domain_attribute(sd, attr); sd->span = *cpu_map; - sd->first_cpu = first_cpu(sd->span); cpu_to_allnodes_group(i, cpu_map, &sd->groups, tmpmask); p = sd; sd_allnodes = 1; @@ -7330,7 +6978,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, NODE); set_domain_attribute(sd, attr); sched_domain_node_span(cpu_to_node(i), &sd->span); - sd->first_cpu = first_cpu(sd->span); sd->parent = p; if (p) p->child = sd; @@ -7342,7 +6989,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, CPU); set_domain_attribute(sd, attr); sd->span = *nodemask; - sd->first_cpu = first_cpu(sd->span); sd->parent = p; if (p) p->child = sd; @@ -7354,7 +7000,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, MC); set_domain_attribute(sd, attr); sd->span = cpu_coregroup_map(i); - sd->first_cpu = first_cpu(sd->span); cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; p->child = sd; @@ -7367,7 +7012,6 @@ static int __build_sched_domains(const cpumask_t *cpu_map, SD_INIT(sd, SIBLING); set_domain_attribute(sd, attr); sd->span = per_cpu(cpu_sibling_map, i); - sd->first_cpu = first_cpu(sd->span); cpus_and(sd->span, sd->span, *cpu_map); sd->parent = p; p->child = sd; @@ -8037,7 +7681,6 @@ void __init sched_init(void) } #ifdef CONFIG_SMP - init_aggregate(); init_defrootdomain(); #endif @@ -8602,11 +8245,14 @@ void sched_move_task(struct task_struct *tsk) #endif #ifdef CONFIG_FAIR_GROUP_SCHED -static void __set_se_shares(struct sched_entity *se, unsigned long shares) +static void set_se_shares(struct sched_entity *se, unsigned long shares) { struct cfs_rq *cfs_rq = se->cfs_rq; + struct rq *rq = cfs_rq->rq; int on_rq; + spin_lock_irq(&rq->lock); + on_rq = se->on_rq; if (on_rq) dequeue_entity(cfs_rq, se, 0); @@ -8616,17 +8262,8 @@ static void __set_se_shares(struct sched_entity *se, unsigned long shares) if (on_rq) enqueue_entity(cfs_rq, se, 0); -} -static void set_se_shares(struct sched_entity *se, unsigned long shares) -{ - struct cfs_rq *cfs_rq = se->cfs_rq; - struct rq *rq = cfs_rq->rq; - unsigned long flags; - - spin_lock_irqsave(&rq->lock, flags); - __set_se_shares(se, shares); - spin_unlock_irqrestore(&rq->lock, flags); + spin_unlock_irq(&rq->lock); } static DEFINE_MUTEX(shares_mutex); @@ -8665,13 +8302,8 @@ int sched_group_set_shares(struct task_group *tg, unsigned long shares) * w/o tripping rebalance_share or load_balance_fair. */ tg->shares = shares; - for_each_possible_cpu(i) { - /* - * force a rebalance - */ - cfs_rq_set_shares(tg->cfs_rq[i], 0); + for_each_possible_cpu(i) set_se_shares(tg->se[i], shares); - } /* * Enable load balance activity on this group, by inserting it back on diff --git a/kernel/sched_debug.c b/kernel/sched_debug.c index 5f06118..8bb7130 100644 --- a/kernel/sched_debug.c +++ b/kernel/sched_debug.c @@ -167,11 +167,6 @@ void print_cfs_rq(struct seq_file *m, int cpu, struct cfs_rq *cfs_rq) #endif SEQ_printf(m, " .%-30s: %ld\n", "nr_spread_over", cfs_rq->nr_spread_over); -#ifdef CONFIG_FAIR_GROUP_SCHED -#ifdef CONFIG_SMP - SEQ_printf(m, " .%-30s: %lu\n", "shares", cfs_rq->shares); -#endif -#endif } static void print_cpu(struct seq_file *m, int cpu) diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index 0eb0ae8..f0f25fc 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -510,27 +510,10 @@ update_stats_curr_start(struct cfs_rq *cfs_rq, struct sched_entity *se) * Scheduling class queueing methods: */ -#if defined CONFIG_SMP && defined CONFIG_FAIR_GROUP_SCHED -static void -add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight) -{ - cfs_rq->task_weight += weight; -} -#else -static inline void -add_cfs_task_weight(struct cfs_rq *cfs_rq, unsigned long weight) -{ -} -#endif - static void account_entity_enqueue(struct cfs_rq *cfs_rq, struct sched_entity *se) { update_load_add(&cfs_rq->load, se->load.weight); - if (!parent_entity(se)) - inc_cpu_load(rq_of(cfs_rq), se->load.weight); - if (entity_is_task(se)) - add_cfs_task_weight(cfs_rq, se->load.weight); cfs_rq->nr_running++; se->on_rq = 1; list_add(&se->group_node, &cfs_rq->tasks); @@ -540,10 +523,6 @@ static void account_entity_dequeue(struct cfs_rq *cfs_rq, struct sched_entity *se) { update_load_sub(&cfs_rq->load, se->load.weight); - if (!parent_entity(se)) - dec_cpu_load(rq_of(cfs_rq), se->load.weight); - if (entity_is_task(se)) - add_cfs_task_weight(cfs_rq, -se->load.weight); cfs_rq->nr_running--; se->on_rq = 0; list_del_init(&se->group_node); @@ -1327,90 +1306,75 @@ static struct task_struct *load_balance_next_fair(void *arg) return __load_balance_iterator(cfs_rq, cfs_rq->balance_iterator); } -static unsigned long -__load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, - unsigned long max_load_move, struct sched_domain *sd, - enum cpu_idle_type idle, int *all_pinned, int *this_best_prio, - struct cfs_rq *cfs_rq) +#ifdef CONFIG_FAIR_GROUP_SCHED +static int cfs_rq_best_prio(struct cfs_rq *cfs_rq) { - struct rq_iterator cfs_rq_iterator; + struct sched_entity *curr; + struct task_struct *p; - cfs_rq_iterator.start = load_balance_start_fair; - cfs_rq_iterator.next = load_balance_next_fair; - cfs_rq_iterator.arg = cfs_rq; + if (!cfs_rq->nr_running || !first_fair(cfs_rq)) + return MAX_PRIO; + + curr = cfs_rq->curr; + if (!curr) + curr = __pick_next_entity(cfs_rq); - return balance_tasks(this_rq, this_cpu, busiest, - max_load_move, sd, idle, all_pinned, - this_best_prio, &cfs_rq_iterator); + p = task_of(curr); + + return p->prio; } +#endif -#ifdef CONFIG_FAIR_GROUP_SCHED static unsigned long load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, unsigned long max_load_move, struct sched_domain *sd, enum cpu_idle_type idle, int *all_pinned, int *this_best_prio) { + struct cfs_rq *busy_cfs_rq; long rem_load_move = max_load_move; - int busiest_cpu = cpu_of(busiest); - struct task_group *tg; - - rcu_read_lock(); - list_for_each_entry(tg, &task_groups, list) { - long imbalance; - unsigned long this_weight, busiest_weight; - long rem_load, max_load, moved_load; - - /* - * empty group - */ - if (!aggregate(tg, sd)->task_weight) - continue; - - rem_load = rem_load_move * aggregate(tg, sd)->rq_weight; - rem_load /= aggregate(tg, sd)->load + 1; - - this_weight = tg->cfs_rq[this_cpu]->task_weight; - busiest_weight = tg->cfs_rq[busiest_cpu]->task_weight; + struct rq_iterator cfs_rq_iterator; - imbalance = (busiest_weight - this_weight) / 2; + cfs_rq_iterator.start = load_balance_start_fair; + cfs_rq_iterator.next = load_balance_next_fair; - if (imbalance < 0) - imbalance = busiest_weight; + for_each_leaf_cfs_rq(busiest, busy_cfs_rq) { +#ifdef CONFIG_FAIR_GROUP_SCHED + struct cfs_rq *this_cfs_rq; + long imbalance; + unsigned long maxload; - max_load = max(rem_load, imbalance); - moved_load = __load_balance_fair(this_rq, this_cpu, busiest, - max_load, sd, idle, all_pinned, this_best_prio, - tg->cfs_rq[busiest_cpu]); + this_cfs_rq = cpu_cfs_rq(busy_cfs_rq, this_cpu); - if (!moved_load) + imbalance = busy_cfs_rq->load.weight - this_cfs_rq->load.weight; + /* Don't pull if this_cfs_rq has more load than busy_cfs_rq */ + if (imbalance <= 0) continue; - move_group_shares(tg, sd, busiest_cpu, this_cpu); + /* Don't pull more than imbalance/2 */ + imbalance /= 2; + maxload = min(rem_load_move, imbalance); - moved_load *= aggregate(tg, sd)->load; - moved_load /= aggregate(tg, sd)->rq_weight + 1; + *this_best_prio = cfs_rq_best_prio(this_cfs_rq); +#else +# define maxload rem_load_move +#endif + /* + * pass busy_cfs_rq argument into + * load_balance_[start|next]_fair iterators + */ + cfs_rq_iterator.arg = busy_cfs_rq; + rem_load_move -= balance_tasks(this_rq, this_cpu, busiest, + maxload, sd, idle, all_pinned, + this_best_prio, + &cfs_rq_iterator); - rem_load_move -= moved_load; - if (rem_load_move < 0) + if (rem_load_move <= 0) break; } - rcu_read_unlock(); return max_load_move - rem_load_move; } -#else -static unsigned long -load_balance_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, - unsigned long max_load_move, - struct sched_domain *sd, enum cpu_idle_type idle, - int *all_pinned, int *this_best_prio) -{ - return __load_balance_fair(this_rq, this_cpu, busiest, - max_load_move, sd, idle, all_pinned, - this_best_prio, &busiest->cfs); -} -#endif static int move_one_task_fair(struct rq *this_rq, int this_cpu, struct rq *busiest, diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 060e87b..3432d57 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -513,8 +513,6 @@ static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup) */ for_each_sched_rt_entity(rt_se) enqueue_rt_entity(rt_se); - - inc_cpu_load(rq, p->se.load.weight); } static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep) @@ -534,8 +532,6 @@ static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep) if (rt_rq && rt_rq->rt_nr_running) enqueue_rt_entity(rt_se); } - - dec_cpu_load(rq, p->se.load.weight); } /* -- cgit v0.10.2 From a381759d6ad5c5dea5a981918e0b4493e9b66ac7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 29 May 2008 10:07:15 +0200 Subject: sched: fix sched_clock_cpu() Make sched_clock_cpu() return 0 before it has been initialized and avoid corrupting its state due to doing so. This fixes the weird printk timestamp jump reported. Signed-off-by: Peter Zijlstra diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c index 9c597e3..ce05271 100644 --- a/kernel/sched_clock.c +++ b/kernel/sched_clock.c @@ -59,22 +59,26 @@ static inline struct sched_clock_data *cpu_sdc(int cpu) return &per_cpu(sched_clock_data, cpu); } +static __read_mostly int sched_clock_running; + void sched_clock_init(void) { u64 ktime_now = ktime_to_ns(ktime_get()); - u64 now = 0; + unsigned long now_jiffies = jiffies; int cpu; for_each_possible_cpu(cpu) { struct sched_clock_data *scd = cpu_sdc(cpu); scd->lock = (raw_spinlock_t)__RAW_SPIN_LOCK_UNLOCKED; - scd->prev_jiffies = jiffies; - scd->prev_raw = now; - scd->tick_raw = now; + scd->prev_jiffies = now_jiffies; + scd->prev_raw = 0; + scd->tick_raw = 0; scd->tick_gtod = ktime_now; scd->clock = ktime_now; } + + sched_clock_running = 1; } /* @@ -136,6 +140,9 @@ u64 sched_clock_cpu(int cpu) struct sched_clock_data *scd = cpu_sdc(cpu); u64 now, clock; + if (unlikely(!sched_clock_running)) + return 0ull; + WARN_ON_ONCE(!irqs_disabled()); now = sched_clock(); @@ -174,6 +181,9 @@ void sched_clock_tick(void) struct sched_clock_data *scd = this_scd(); u64 now, now_gtod; + if (unlikely(!sched_clock_running)) + return; + WARN_ON_ONCE(!irqs_disabled()); now = sched_clock(); -- cgit v0.10.2 From b3137bc8e77962a8e3b4dfdc1bcfd38e437bd278 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Thu, 29 May 2008 11:11:41 +0200 Subject: sched: stop wake_affine from causing serious imbalance Prevent short-running wakers of short-running threads from overloading a single cpu via wakeup affinity, and wire up disconnected debug option. Signed-off-by: Mike Galbraith Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched_fair.c b/kernel/sched_fair.c index f0f25fc..08ae848 100644 --- a/kernel/sched_fair.c +++ b/kernel/sched_fair.c @@ -996,16 +996,27 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, struct task_struct *curr = this_rq->curr; unsigned long tl = this_load; unsigned long tl_per_task; + int balanced; - if (!(this_sd->flags & SD_WAKE_AFFINE)) + if (!(this_sd->flags & SD_WAKE_AFFINE) || !sched_feat(AFFINE_WAKEUPS)) return 0; /* + * If sync wakeup then subtract the (maximum possible) + * effect of the currently running task from the load + * of the current CPU: + */ + if (sync) + tl -= current->se.load.weight; + + balanced = 100*(tl + p->se.load.weight) <= imbalance*load; + + /* * If the currently running task will sleep within * a reasonable amount of time then attract this newly * woken task: */ - if (sync && curr->sched_class == &fair_sched_class) { + if (sync && balanced && curr->sched_class == &fair_sched_class) { if (curr->se.avg_overlap < sysctl_sched_migration_cost && p->se.avg_overlap < sysctl_sched_migration_cost) return 1; @@ -1014,16 +1025,8 @@ wake_affine(struct rq *rq, struct sched_domain *this_sd, struct rq *this_rq, schedstat_inc(p, se.nr_wakeups_affine_attempts); tl_per_task = cpu_avg_load_per_task(this_cpu); - /* - * If sync wakeup then subtract the (maximum possible) - * effect of the currently running task from the load - * of the current CPU: - */ - if (sync) - tl -= current->se.load.weight; - if ((tl <= load && tl + target_load(prev_cpu, idx) <= tl_per_task) || - 100*(tl + p->se.load.weight) <= imbalance*load) { + balanced) { /* * This domain has SD_WAKE_AFFINE and * p is cache cold in this domain, and -- cgit v0.10.2 From 12293bf91126ad253a25e2840b307fdc7c2754c3 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 29 May 2008 03:19:37 -0700 Subject: netfilter: nf_conntrack_expect: fix error path unwind in nf_conntrack_expect_init() Signed-off-by: Alexey Dobriyan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c index e31beeb..e8f0dea 100644 --- a/net/netfilter/nf_conntrack_expect.c +++ b/net/netfilter/nf_conntrack_expect.c @@ -587,10 +587,10 @@ int __init nf_conntrack_expect_init(void) return 0; err3: + kmem_cache_destroy(nf_ct_expect_cachep); +err2: nf_ct_free_hashtable(nf_ct_expect_hash, nf_ct_expect_vmalloc, nf_ct_expect_hsize); -err2: - kmem_cache_destroy(nf_ct_expect_cachep); err1: return err; } -- cgit v0.10.2 From ea3f01f8afd3bc5daff915cc4ea5cc5ea9e7d427 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 29 May 2008 14:32:23 +0200 Subject: sched: re-tune NUMA topologies improve the sysbench ramp-up phase and its peak throughput on a 16way NUMA box, by turning on WAKE_AFFINE: tip/sched tip/sched+wake-affine ------------------------------------------------- 1: 700 830 +15.65% 2: 1465 1391 -5.28% 4: 3017 3105 +2.81% 8: 5100 6021 +15.30% 16: 10725 10745 +0.19% 32: 10135 10150 +0.16% 64: 9338 9240 -1.06% 128: 8599 8252 -4.21% 256: 8475 8144 -4.07% ------------------------------------------------- SUM: 57558 57882 +0.56% this change also improves lat_ctx from 6.69 usecs to 1.11 usec: $ ./lat_ctx -s 0 2 "size=0k ovr=1.19 2 1.11 $ ./lat_ctx -s 0 2 "size=0k ovr=1.22 2 6.69 in sysbench it's an overall win with some weakness at the lots-of-clients side. That happens because we now under-balance this workload a bit. To counter that effect, turn on NEWIDLE: wake-idle wake-idle+newidle ------------------------------------------------- 1: 830 834 +0.43% 2: 1391 1401 +0.65% 4: 3105 3091 -0.43% 8: 6021 6046 +0.42% 16: 10745 10736 -0.08% 32: 10150 10206 +0.55% 64: 9240 9533 +3.08% 128: 8252 8355 +1.24% 256: 8144 8384 +2.87% ------------------------------------------------- SUM: 57882 58591 +1.21% as a bonus this not only improves the many-clients case but also improves the (more important) rampup phase. sysbench is a workload that quickly breaks down if the scheduler over-balances, so since it showed an improvement under NEWIDLE this change is definitely good. diff --git a/include/linux/topology.h b/include/linux/topology.h index 4bb7074..24f3d22 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -166,7 +166,9 @@ void arch_update_cpu_topology(void); .busy_idx = 3, \ .idle_idx = 3, \ .flags = SD_LOAD_BALANCE \ - | SD_SERIALIZE, \ + | SD_BALANCE_NEWIDLE \ + | SD_WAKE_AFFINE \ + | SD_SERIALIZE, \ .last_balance = jiffies, \ .balance_interval = 64, \ } -- cgit v0.10.2 From dca026139317dcbc642a30320d551f559692182f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Lothar=20Wa=C3=9Fmann?= Date: Thu, 29 May 2008 17:54:52 +0200 Subject: [CPUFREQ] fix double unlock of cpu_policy_rwsem in drivers/cpufreq/cpufreq.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit In drivers/cpufreq/cpufreq.c the function cpufreq_add_dev() takes the error exit 'err_out_unregister' from different places once with the 'cpu_policy_rwsem' lock held, once with the lock released: | if (ret) | goto err_out_unregister; | } | | policy->governor = NULL; /* to assure that the starting sequence is | * run in cpufreq_set_policy */ | | /* set default policy */ | ret = __cpufreq_set_policy(policy, &new_policy); | policy->user_policy.policy = policy->policy; | policy->user_policy.governor = policy->governor; | | unlock_policy_rwsem_write(cpu); | | if (ret) { | dprintk("setting policy failed\n"); | goto err_out_unregister; | } This leads to the following error message in case of a failing __cpufreq_set_policy() call: ===================================== [ BUG: bad unlock balance detected! ] ------------------------------------- swapper/1 is trying to release lock (&per_cpu(cpu_policy_rwsem, cpu)) at: [] unlock_policy_rwsem_write+0x30/0x40 but there are no more locks to release! other info that might help us debug this: 1 lock held by swapper/1: #0: (sysdev_drivers_lock){--..}, at: [] sysdev_driver_register+0x74/0x130 stack backtrace: [] (dump_stack+0x0/0x14) from [] (print_unlock_inbalance_bug+0xc8/0x104) [] (print_unlock_inbalance_bug+0x0/0x104) from [] (lock_release_non_nested+0xc4/0x19c) r6:00000028 r5:c3c1ab80 r4:c01b4564 [] (lock_release_non_nested+0x0/0x19c) from [] (lock_release+0x15c/0x18c) r8:60000013 r7:00000001 r6:c01b4564 r5:c0541bb4 r4:c3c1ab80 [] (lock_release+0x0/0x18c) from [] (up_write+0x24/0x30) r8:c0541b80 r7:00000000 r6:ffffffea r5:c3c34828 r4:c0541b8c [] (up_write+0x0/0x30) from [] (unlock_policy_rwsem_write+0x30/0x40) r4:c3c34884 [] (unlock_policy_rwsem_write+0x0/0x40) from [] (cpufreq_add_dev+0x324/0x398) [] (cpufreq_add_dev+0x0/0x398) from [] (sysdev_driver_register+0xc0/0x130) [] (sysdev_driver_register+0x0/0x130) from [] (cpufreq_register_driver+0xbc/0x174) Signed-off-by: Lothar WaĂŸmann Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 7fce038..86f0a24 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -928,13 +928,13 @@ static int cpufreq_add_dev(struct sys_device *sys_dev) policy->user_policy.policy = policy->policy; policy->user_policy.governor = policy->governor; - unlock_policy_rwsem_write(cpu); - if (ret) { dprintk("setting policy failed\n"); goto err_out_unregister; } + unlock_policy_rwsem_write(cpu); + kobject_uevent(&policy->kobj, KOBJ_ADD); module_put(cpufreq_driver->owner); dprintk("initialization complete\n"); -- cgit v0.10.2 From ebb3770c01a8afd049e3e91b0a026dcdfcb2da9f Mon Sep 17 00:00:00 2001 From: Ray Molenkamp Date: Wed, 21 May 2008 17:06:26 -0600 Subject: USB: FTDI_SIO : Add support for Matrix Orbital PID Range This patch adds support for the range of PIDs that have been allocated for FTDI based devices at Matrix Orbital. A small number of units have been shipped early 2008 with a faulty USB Descriptor. Products that may have this issue have been marked with the existing quirk to work around the problem. Signed-off-by: R. Molenkamp Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 3cee6fe..5234e7a 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -174,8 +174,270 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_MTXORB_4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_5_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MTXORB_6_PID) }, - { USB_DEVICE(MTXORB_VK_VID, MTXORB_VK_PID), + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0100_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0101_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0102_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0103_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0104_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0105_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0106_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0107_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0108_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0109_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_010F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0110_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0111_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0112_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0113_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0114_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0115_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0116_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0117_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0118_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0119_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_011F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0120_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0121_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0122_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0123_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0124_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0125_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0126_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0127_PID), .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0128_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0129_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012C_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_012F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0130_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0131_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0132_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0133_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0134_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0135_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0136_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0137_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0138_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0139_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_013F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0140_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0141_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0142_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0143_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0144_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0145_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0146_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0147_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0148_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0149_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_014F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0150_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0151_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0152_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0153_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0154_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0155_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0156_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0157_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0158_PID), + .driver_info = (kernel_ulong_t)&ftdi_mtxorb_hack_quirk }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0159_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_015F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0160_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0161_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0162_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0163_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0164_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0165_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0166_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0167_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0168_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0169_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_016F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0170_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0171_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0172_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0173_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0174_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0175_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0176_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0177_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0178_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0179_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_017F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0180_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0181_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0182_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0183_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0184_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0185_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0186_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0187_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0188_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0189_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_018F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0190_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0191_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0192_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0193_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0194_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0195_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0196_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0197_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0198_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_0199_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019A_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019B_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019C_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019D_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019E_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_019F_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01A9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01AF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01B9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01BF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01C9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01CF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01D9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01DF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01E9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01ED_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01EF_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F0_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F1_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F2_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F3_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F4_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F5_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F6_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F7_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F8_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01F9_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FA_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FB_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FC_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FD_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FE_PID) }, + { USB_DEVICE(MTXORB_VID,MTXORB_FTDI_RANGE_01FF_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) }, { USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) }, diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index a72f2c8..06e0eca 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -114,11 +114,268 @@ #define FTDI_OOCDLINK_PID 0xbaf8 /* Amontec JTAGkey */ /* - * The following are the values for the Matrix Orbital VK204-25-USB - * display, which use the FT232RL. - */ -#define MTXORB_VK_VID 0x1b3d -#define MTXORB_VK_PID 0x0158 + * The following are the values for the Matrix Orbital FTDI Range + * Anything in this range will use an FT232RL. + */ +#define MTXORB_VID 0x1B3D +#define MTXORB_FTDI_RANGE_0100_PID 0x0100 +#define MTXORB_FTDI_RANGE_0101_PID 0x0101 +#define MTXORB_FTDI_RANGE_0102_PID 0x0102 +#define MTXORB_FTDI_RANGE_0103_PID 0x0103 +#define MTXORB_FTDI_RANGE_0104_PID 0x0104 +#define MTXORB_FTDI_RANGE_0105_PID 0x0105 +#define MTXORB_FTDI_RANGE_0106_PID 0x0106 +#define MTXORB_FTDI_RANGE_0107_PID 0x0107 +#define MTXORB_FTDI_RANGE_0108_PID 0x0108 +#define MTXORB_FTDI_RANGE_0109_PID 0x0109 +#define MTXORB_FTDI_RANGE_010A_PID 0x010A +#define MTXORB_FTDI_RANGE_010B_PID 0x010B +#define MTXORB_FTDI_RANGE_010C_PID 0x010C +#define MTXORB_FTDI_RANGE_010D_PID 0x010D +#define MTXORB_FTDI_RANGE_010E_PID 0x010E +#define MTXORB_FTDI_RANGE_010F_PID 0x010F +#define MTXORB_FTDI_RANGE_0110_PID 0x0110 +#define MTXORB_FTDI_RANGE_0111_PID 0x0111 +#define MTXORB_FTDI_RANGE_0112_PID 0x0112 +#define MTXORB_FTDI_RANGE_0113_PID 0x0113 +#define MTXORB_FTDI_RANGE_0114_PID 0x0114 +#define MTXORB_FTDI_RANGE_0115_PID 0x0115 +#define MTXORB_FTDI_RANGE_0116_PID 0x0116 +#define MTXORB_FTDI_RANGE_0117_PID 0x0117 +#define MTXORB_FTDI_RANGE_0118_PID 0x0118 +#define MTXORB_FTDI_RANGE_0119_PID 0x0119 +#define MTXORB_FTDI_RANGE_011A_PID 0x011A +#define MTXORB_FTDI_RANGE_011B_PID 0x011B +#define MTXORB_FTDI_RANGE_011C_PID 0x011C +#define MTXORB_FTDI_RANGE_011D_PID 0x011D +#define MTXORB_FTDI_RANGE_011E_PID 0x011E +#define MTXORB_FTDI_RANGE_011F_PID 0x011F +#define MTXORB_FTDI_RANGE_0120_PID 0x0120 +#define MTXORB_FTDI_RANGE_0121_PID 0x0121 +#define MTXORB_FTDI_RANGE_0122_PID 0x0122 +#define MTXORB_FTDI_RANGE_0123_PID 0x0123 +#define MTXORB_FTDI_RANGE_0124_PID 0x0124 +#define MTXORB_FTDI_RANGE_0125_PID 0x0125 +#define MTXORB_FTDI_RANGE_0126_PID 0x0126 +#define MTXORB_FTDI_RANGE_0127_PID 0x0127 +#define MTXORB_FTDI_RANGE_0128_PID 0x0128 +#define MTXORB_FTDI_RANGE_0129_PID 0x0129 +#define MTXORB_FTDI_RANGE_012A_PID 0x012A +#define MTXORB_FTDI_RANGE_012B_PID 0x012B +#define MTXORB_FTDI_RANGE_012C_PID 0x012C +#define MTXORB_FTDI_RANGE_012D_PID 0x012D +#define MTXORB_FTDI_RANGE_012E_PID 0x012E +#define MTXORB_FTDI_RANGE_012F_PID 0x012F +#define MTXORB_FTDI_RANGE_0130_PID 0x0130 +#define MTXORB_FTDI_RANGE_0131_PID 0x0131 +#define MTXORB_FTDI_RANGE_0132_PID 0x0132 +#define MTXORB_FTDI_RANGE_0133_PID 0x0133 +#define MTXORB_FTDI_RANGE_0134_PID 0x0134 +#define MTXORB_FTDI_RANGE_0135_PID 0x0135 +#define MTXORB_FTDI_RANGE_0136_PID 0x0136 +#define MTXORB_FTDI_RANGE_0137_PID 0x0137 +#define MTXORB_FTDI_RANGE_0138_PID 0x0138 +#define MTXORB_FTDI_RANGE_0139_PID 0x0139 +#define MTXORB_FTDI_RANGE_013A_PID 0x013A +#define MTXORB_FTDI_RANGE_013B_PID 0x013B +#define MTXORB_FTDI_RANGE_013C_PID 0x013C +#define MTXORB_FTDI_RANGE_013D_PID 0x013D +#define MTXORB_FTDI_RANGE_013E_PID 0x013E +#define MTXORB_FTDI_RANGE_013F_PID 0x013F +#define MTXORB_FTDI_RANGE_0140_PID 0x0140 +#define MTXORB_FTDI_RANGE_0141_PID 0x0141 +#define MTXORB_FTDI_RANGE_0142_PID 0x0142 +#define MTXORB_FTDI_RANGE_0143_PID 0x0143 +#define MTXORB_FTDI_RANGE_0144_PID 0x0144 +#define MTXORB_FTDI_RANGE_0145_PID 0x0145 +#define MTXORB_FTDI_RANGE_0146_PID 0x0146 +#define MTXORB_FTDI_RANGE_0147_PID 0x0147 +#define MTXORB_FTDI_RANGE_0148_PID 0x0148 +#define MTXORB_FTDI_RANGE_0149_PID 0x0149 +#define MTXORB_FTDI_RANGE_014A_PID 0x014A +#define MTXORB_FTDI_RANGE_014B_PID 0x014B +#define MTXORB_FTDI_RANGE_014C_PID 0x014C +#define MTXORB_FTDI_RANGE_014D_PID 0x014D +#define MTXORB_FTDI_RANGE_014E_PID 0x014E +#define MTXORB_FTDI_RANGE_014F_PID 0x014F +#define MTXORB_FTDI_RANGE_0150_PID 0x0150 +#define MTXORB_FTDI_RANGE_0151_PID 0x0151 +#define MTXORB_FTDI_RANGE_0152_PID 0x0152 +#define MTXORB_FTDI_RANGE_0153_PID 0x0153 +#define MTXORB_FTDI_RANGE_0154_PID 0x0154 +#define MTXORB_FTDI_RANGE_0155_PID 0x0155 +#define MTXORB_FTDI_RANGE_0156_PID 0x0156 +#define MTXORB_FTDI_RANGE_0157_PID 0x0157 +#define MTXORB_FTDI_RANGE_0158_PID 0x0158 +#define MTXORB_FTDI_RANGE_0159_PID 0x0159 +#define MTXORB_FTDI_RANGE_015A_PID 0x015A +#define MTXORB_FTDI_RANGE_015B_PID 0x015B +#define MTXORB_FTDI_RANGE_015C_PID 0x015C +#define MTXORB_FTDI_RANGE_015D_PID 0x015D +#define MTXORB_FTDI_RANGE_015E_PID 0x015E +#define MTXORB_FTDI_RANGE_015F_PID 0x015F +#define MTXORB_FTDI_RANGE_0160_PID 0x0160 +#define MTXORB_FTDI_RANGE_0161_PID 0x0161 +#define MTXORB_FTDI_RANGE_0162_PID 0x0162 +#define MTXORB_FTDI_RANGE_0163_PID 0x0163 +#define MTXORB_FTDI_RANGE_0164_PID 0x0164 +#define MTXORB_FTDI_RANGE_0165_PID 0x0165 +#define MTXORB_FTDI_RANGE_0166_PID 0x0166 +#define MTXORB_FTDI_RANGE_0167_PID 0x0167 +#define MTXORB_FTDI_RANGE_0168_PID 0x0168 +#define MTXORB_FTDI_RANGE_0169_PID 0x0169 +#define MTXORB_FTDI_RANGE_016A_PID 0x016A +#define MTXORB_FTDI_RANGE_016B_PID 0x016B +#define MTXORB_FTDI_RANGE_016C_PID 0x016C +#define MTXORB_FTDI_RANGE_016D_PID 0x016D +#define MTXORB_FTDI_RANGE_016E_PID 0x016E +#define MTXORB_FTDI_RANGE_016F_PID 0x016F +#define MTXORB_FTDI_RANGE_0170_PID 0x0170 +#define MTXORB_FTDI_RANGE_0171_PID 0x0171 +#define MTXORB_FTDI_RANGE_0172_PID 0x0172 +#define MTXORB_FTDI_RANGE_0173_PID 0x0173 +#define MTXORB_FTDI_RANGE_0174_PID 0x0174 +#define MTXORB_FTDI_RANGE_0175_PID 0x0175 +#define MTXORB_FTDI_RANGE_0176_PID 0x0176 +#define MTXORB_FTDI_RANGE_0177_PID 0x0177 +#define MTXORB_FTDI_RANGE_0178_PID 0x0178 +#define MTXORB_FTDI_RANGE_0179_PID 0x0179 +#define MTXORB_FTDI_RANGE_017A_PID 0x017A +#define MTXORB_FTDI_RANGE_017B_PID 0x017B +#define MTXORB_FTDI_RANGE_017C_PID 0x017C +#define MTXORB_FTDI_RANGE_017D_PID 0x017D +#define MTXORB_FTDI_RANGE_017E_PID 0x017E +#define MTXORB_FTDI_RANGE_017F_PID 0x017F +#define MTXORB_FTDI_RANGE_0180_PID 0x0180 +#define MTXORB_FTDI_RANGE_0181_PID 0x0181 +#define MTXORB_FTDI_RANGE_0182_PID 0x0182 +#define MTXORB_FTDI_RANGE_0183_PID 0x0183 +#define MTXORB_FTDI_RANGE_0184_PID 0x0184 +#define MTXORB_FTDI_RANGE_0185_PID 0x0185 +#define MTXORB_FTDI_RANGE_0186_PID 0x0186 +#define MTXORB_FTDI_RANGE_0187_PID 0x0187 +#define MTXORB_FTDI_RANGE_0188_PID 0x0188 +#define MTXORB_FTDI_RANGE_0189_PID 0x0189 +#define MTXORB_FTDI_RANGE_018A_PID 0x018A +#define MTXORB_FTDI_RANGE_018B_PID 0x018B +#define MTXORB_FTDI_RANGE_018C_PID 0x018C +#define MTXORB_FTDI_RANGE_018D_PID 0x018D +#define MTXORB_FTDI_RANGE_018E_PID 0x018E +#define MTXORB_FTDI_RANGE_018F_PID 0x018F +#define MTXORB_FTDI_RANGE_0190_PID 0x0190 +#define MTXORB_FTDI_RANGE_0191_PID 0x0191 +#define MTXORB_FTDI_RANGE_0192_PID 0x0192 +#define MTXORB_FTDI_RANGE_0193_PID 0x0193 +#define MTXORB_FTDI_RANGE_0194_PID 0x0194 +#define MTXORB_FTDI_RANGE_0195_PID 0x0195 +#define MTXORB_FTDI_RANGE_0196_PID 0x0196 +#define MTXORB_FTDI_RANGE_0197_PID 0x0197 +#define MTXORB_FTDI_RANGE_0198_PID 0x0198 +#define MTXORB_FTDI_RANGE_0199_PID 0x0199 +#define MTXORB_FTDI_RANGE_019A_PID 0x019A +#define MTXORB_FTDI_RANGE_019B_PID 0x019B +#define MTXORB_FTDI_RANGE_019C_PID 0x019C +#define MTXORB_FTDI_RANGE_019D_PID 0x019D +#define MTXORB_FTDI_RANGE_019E_PID 0x019E +#define MTXORB_FTDI_RANGE_019F_PID 0x019F +#define MTXORB_FTDI_RANGE_01A0_PID 0x01A0 +#define MTXORB_FTDI_RANGE_01A1_PID 0x01A1 +#define MTXORB_FTDI_RANGE_01A2_PID 0x01A2 +#define MTXORB_FTDI_RANGE_01A3_PID 0x01A3 +#define MTXORB_FTDI_RANGE_01A4_PID 0x01A4 +#define MTXORB_FTDI_RANGE_01A5_PID 0x01A5 +#define MTXORB_FTDI_RANGE_01A6_PID 0x01A6 +#define MTXORB_FTDI_RANGE_01A7_PID 0x01A7 +#define MTXORB_FTDI_RANGE_01A8_PID 0x01A8 +#define MTXORB_FTDI_RANGE_01A9_PID 0x01A9 +#define MTXORB_FTDI_RANGE_01AA_PID 0x01AA +#define MTXORB_FTDI_RANGE_01AB_PID 0x01AB +#define MTXORB_FTDI_RANGE_01AC_PID 0x01AC +#define MTXORB_FTDI_RANGE_01AD_PID 0x01AD +#define MTXORB_FTDI_RANGE_01AE_PID 0x01AE +#define MTXORB_FTDI_RANGE_01AF_PID 0x01AF +#define MTXORB_FTDI_RANGE_01B0_PID 0x01B0 +#define MTXORB_FTDI_RANGE_01B1_PID 0x01B1 +#define MTXORB_FTDI_RANGE_01B2_PID 0x01B2 +#define MTXORB_FTDI_RANGE_01B3_PID 0x01B3 +#define MTXORB_FTDI_RANGE_01B4_PID 0x01B4 +#define MTXORB_FTDI_RANGE_01B5_PID 0x01B5 +#define MTXORB_FTDI_RANGE_01B6_PID 0x01B6 +#define MTXORB_FTDI_RANGE_01B7_PID 0x01B7 +#define MTXORB_FTDI_RANGE_01B8_PID 0x01B8 +#define MTXORB_FTDI_RANGE_01B9_PID 0x01B9 +#define MTXORB_FTDI_RANGE_01BA_PID 0x01BA +#define MTXORB_FTDI_RANGE_01BB_PID 0x01BB +#define MTXORB_FTDI_RANGE_01BC_PID 0x01BC +#define MTXORB_FTDI_RANGE_01BD_PID 0x01BD +#define MTXORB_FTDI_RANGE_01BE_PID 0x01BE +#define MTXORB_FTDI_RANGE_01BF_PID 0x01BF +#define MTXORB_FTDI_RANGE_01C0_PID 0x01C0 +#define MTXORB_FTDI_RANGE_01C1_PID 0x01C1 +#define MTXORB_FTDI_RANGE_01C2_PID 0x01C2 +#define MTXORB_FTDI_RANGE_01C3_PID 0x01C3 +#define MTXORB_FTDI_RANGE_01C4_PID 0x01C4 +#define MTXORB_FTDI_RANGE_01C5_PID 0x01C5 +#define MTXORB_FTDI_RANGE_01C6_PID 0x01C6 +#define MTXORB_FTDI_RANGE_01C7_PID 0x01C7 +#define MTXORB_FTDI_RANGE_01C8_PID 0x01C8 +#define MTXORB_FTDI_RANGE_01C9_PID 0x01C9 +#define MTXORB_FTDI_RANGE_01CA_PID 0x01CA +#define MTXORB_FTDI_RANGE_01CB_PID 0x01CB +#define MTXORB_FTDI_RANGE_01CC_PID 0x01CC +#define MTXORB_FTDI_RANGE_01CD_PID 0x01CD +#define MTXORB_FTDI_RANGE_01CE_PID 0x01CE +#define MTXORB_FTDI_RANGE_01CF_PID 0x01CF +#define MTXORB_FTDI_RANGE_01D0_PID 0x01D0 +#define MTXORB_FTDI_RANGE_01D1_PID 0x01D1 +#define MTXORB_FTDI_RANGE_01D2_PID 0x01D2 +#define MTXORB_FTDI_RANGE_01D3_PID 0x01D3 +#define MTXORB_FTDI_RANGE_01D4_PID 0x01D4 +#define MTXORB_FTDI_RANGE_01D5_PID 0x01D5 +#define MTXORB_FTDI_RANGE_01D6_PID 0x01D6 +#define MTXORB_FTDI_RANGE_01D7_PID 0x01D7 +#define MTXORB_FTDI_RANGE_01D8_PID 0x01D8 +#define MTXORB_FTDI_RANGE_01D9_PID 0x01D9 +#define MTXORB_FTDI_RANGE_01DA_PID 0x01DA +#define MTXORB_FTDI_RANGE_01DB_PID 0x01DB +#define MTXORB_FTDI_RANGE_01DC_PID 0x01DC +#define MTXORB_FTDI_RANGE_01DD_PID 0x01DD +#define MTXORB_FTDI_RANGE_01DE_PID 0x01DE +#define MTXORB_FTDI_RANGE_01DF_PID 0x01DF +#define MTXORB_FTDI_RANGE_01E0_PID 0x01E0 +#define MTXORB_FTDI_RANGE_01E1_PID 0x01E1 +#define MTXORB_FTDI_RANGE_01E2_PID 0x01E2 +#define MTXORB_FTDI_RANGE_01E3_PID 0x01E3 +#define MTXORB_FTDI_RANGE_01E4_PID 0x01E4 +#define MTXORB_FTDI_RANGE_01E5_PID 0x01E5 +#define MTXORB_FTDI_RANGE_01E6_PID 0x01E6 +#define MTXORB_FTDI_RANGE_01E7_PID 0x01E7 +#define MTXORB_FTDI_RANGE_01E8_PID 0x01E8 +#define MTXORB_FTDI_RANGE_01E9_PID 0x01E9 +#define MTXORB_FTDI_RANGE_01EA_PID 0x01EA +#define MTXORB_FTDI_RANGE_01EB_PID 0x01EB +#define MTXORB_FTDI_RANGE_01EC_PID 0x01EC +#define MTXORB_FTDI_RANGE_01ED_PID 0x01ED +#define MTXORB_FTDI_RANGE_01EE_PID 0x01EE +#define MTXORB_FTDI_RANGE_01EF_PID 0x01EF +#define MTXORB_FTDI_RANGE_01F0_PID 0x01F0 +#define MTXORB_FTDI_RANGE_01F1_PID 0x01F1 +#define MTXORB_FTDI_RANGE_01F2_PID 0x01F2 +#define MTXORB_FTDI_RANGE_01F3_PID 0x01F3 +#define MTXORB_FTDI_RANGE_01F4_PID 0x01F4 +#define MTXORB_FTDI_RANGE_01F5_PID 0x01F5 +#define MTXORB_FTDI_RANGE_01F6_PID 0x01F6 +#define MTXORB_FTDI_RANGE_01F7_PID 0x01F7 +#define MTXORB_FTDI_RANGE_01F8_PID 0x01F8 +#define MTXORB_FTDI_RANGE_01F9_PID 0x01F9 +#define MTXORB_FTDI_RANGE_01FA_PID 0x01FA +#define MTXORB_FTDI_RANGE_01FB_PID 0x01FB +#define MTXORB_FTDI_RANGE_01FC_PID 0x01FC +#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD +#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE +#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF + + /* Interbiometrics USB I/O Board */ /* Developed for Interbiometrics by Rudolf Gugler */ -- cgit v0.10.2 From 62d104d0deeabd4148e49eba729d963e740e205f Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 20 May 2008 20:06:28 +0100 Subject: USB: Firmware loader driver for USB Apple iSight camera Uninitialised Apple iSight drivers present with a distinctive USB ID. Once firmware has been uploaded, they disconnect and reconnect with a new ID. At this point they can be driven by the uvcvideo driver. As this is unique to the Apple cameras and not functionality shared by any other UVC devices, it makes sense to provide the firmware loading functionality in a separate driver. This driver will read an isight.fw file extracted from the Apple driver using the tools at http://bersace03.free.fr/ift/ and upload it to the camera. It will also handle the case where the device loses its firmware during hibernation and must have it reloaded. Signed-off-by: Matthew Garrett Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index a53db1d..eb6c069 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -269,3 +269,14 @@ config USB_TEST See for more information, including sample test device firmware and "how to use it". +config USB_ISIGHTFW + tristate "iSight firmware loading support" + depends on USB + help + This driver loads firmware for USB Apple iSight cameras, allowing + them to be driven by the USB video class driver available at + http://linux-uvc.berlios.de + + The firmware for this driver must be extracted from the MacOS + driver beforehand. Tools for doing so are available at + http://bersace03.free.fr diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index b68e6b7..aba091c 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_USB_EMI62) += emi62.o obj-$(CONFIG_USB_FTDI_ELAN) += ftdi-elan.o obj-$(CONFIG_USB_IDMOUSE) += idmouse.o obj-$(CONFIG_USB_IOWARRIOR) += iowarrior.o +obj-$(CONFIG_USB_ISIGHTFW) += isight_firmware.o obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LED) += usbled.o diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c new file mode 100644 index 0000000..390e048 --- /dev/null +++ b/drivers/usb/misc/isight_firmware.c @@ -0,0 +1,131 @@ +/* + * Driver for loading USB isight firmware + * + * Copyright (C) 2008 Matthew Garrett + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * The USB isight cameras in recent Apples are roughly compatible with the USB + * video class specification, and can be driven by uvcvideo. However, they + * need firmware to be loaded beforehand. After firmware loading, the device + * detaches from the USB bus and reattaches with a new device ID. It can then + * be claimed by the uvc driver. + * + * The firmware is non-free and must be extracted by the user. Tools to do this + * are available at http://bersace03.free.fr/ift/ + * + * The isight firmware loading was reverse engineered by Johannes Berg + * , and this driver is based on code by Ronald + * Bultje + */ + +#include +#include +#include +#include + +static struct usb_device_id id_table[] = { + {USB_DEVICE(0x05ac, 0x8300)}, + {}, +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static int isight_firmware_load(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *dev = interface_to_usbdev(intf); + int llen, len, req, ret = 0; + const struct firmware *firmware; + unsigned char *buf; + unsigned char data[4]; + char *ptr; + + if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { + printk(KERN_ERR "Unable to load isight firmware\n"); + return -ENODEV; + } + + ptr = firmware->data; + + if (usb_control_msg + (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\1", 1, + 300) != 1) { + printk(KERN_ERR + "Failed to initialise isight firmware loader\n"); + ret = -ENODEV; + goto out; + } + + while (1) { + memcpy(data, ptr, 4); + len = (data[0] << 8 | data[1]); + req = (data[2] << 8 | data[3]); + ptr += 4; + + if (len == 0x8001) + break; /* success */ + else if (len == 0) + continue; + + for (; len > 0; req += 50) { + llen = len > 50 ? 50 : len; + len -= llen; + + buf = kmalloc(llen, GFP_KERNEL); + memcpy(buf, ptr, llen); + + ptr += llen; + + if (usb_control_msg + (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, req, 0, + buf, llen, 300) != llen) { + printk(KERN_ERR + "Failed to load isight firmware\n"); + kfree(buf); + ret = -ENODEV; + goto out; + } + + kfree(buf); + } + } + if (usb_control_msg + (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1, + 300) != 1) { + printk(KERN_ERR "isight firmware loading completion failed\n"); + ret = -ENODEV; + } +out: + release_firmware(firmware); + return ret; +} + +static void isight_firmware_disconnect(struct usb_interface *intf) +{ +} + +static struct usb_driver isight_firmware_driver = { + .name = "isight_firmware", + .probe = isight_firmware_load, + .disconnect = isight_firmware_disconnect, + .id_table = id_table, +}; + +static int __init isight_firmware_init(void) +{ + return usb_register(&isight_firmware_driver); +} + +static void __exit isight_firmware_exit(void) +{ + usb_deregister(&isight_firmware_driver); +} + +module_init(isight_firmware_init); +module_exit(isight_firmware_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Matthew Garrett "); -- cgit v0.10.2 From e16362a0c8d90e9adbfe477acbe32b021823fb22 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:37:34 -0400 Subject: USB: fix possible deadlock involving sysfs attributes There is a potential deadlock when the usb_generic driver is unbound from a device. The problem is that generic_disconnect() is called with the device lock held, and it removes a bunch of device attributes from sysfs. If a user task happens to be running an attribute method at the time, the removal will block until the method returns. But at least one of the attribute methods (the store routine for power/level) needs to acquire the device lock! This patch (as1093) eliminates the deadlock by moving the calls to create and remove the sysfs attributes from the usb_generic driver into usb_new_device() and usb_disconnect(), where they can be invoked without holding the device lock. Besides, the other sysfs attributes are created when the device is registered and removed when the device is unregistered. So it seems only fitting for the extra attributes to be created and removed at the same time. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c index c1cb94e..7e912f2 100644 --- a/drivers/usb/core/generic.c +++ b/drivers/usb/core/generic.c @@ -155,9 +155,6 @@ static int generic_probe(struct usb_device *udev) { int err, c; - /* put device-specific files into sysfs */ - usb_create_sysfs_dev_files(udev); - /* Choose and set the configuration. This registers the interfaces * with the driver core and lets interface drivers bind to them. */ @@ -189,8 +186,6 @@ static void generic_disconnect(struct usb_device *udev) * unconfigure the device */ if (udev->actconfig) usb_set_configuration(udev, -1); - - usb_remove_sysfs_dev_files(udev); } #ifdef CONFIG_PM diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index eb57fcc..1a3d287 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1326,6 +1326,12 @@ void usb_disconnect(struct usb_device **pdev) usb_unlock_device(udev); + /* Remove the device-specific files from sysfs. This must be + * done with udev unlocked, because some of the attribute + * routines try to acquire the device lock. + */ + usb_remove_sysfs_dev_files(udev); + /* Unregister the device. The device driver is responsible * for removing the device files from usbfs and sysfs and for * de-configuring the device. @@ -1541,6 +1547,9 @@ int usb_new_device(struct usb_device *udev) goto fail; } + /* put device-specific files into sysfs */ + usb_create_sysfs_dev_files(udev); + /* Tell the world! */ announce_device(udev); return err; -- cgit v0.10.2 From 217a9081d8e69026186067711131b77f0ce219ed Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:40:42 -0400 Subject: USB: add all configs to the "descriptors" attribute This patch (as1094) changes the output of the "descriptors" binary attribute. Now it will contain the device descriptor followed by all the configuration descriptors, not just the descriptor for the current config. Userspace libraries want to have access to the kernel's cached descriptor information, so they can learn about device characteristics without having to wake up suspended devices. So far the only user of this attribute is the new libusb-1.0 library; thus changing its contents shouldn't cause any problems. This should be considered for 2.6.26, if for no other reason than to minimize the range of releases in which the attribute contains only the current config descriptor. Also, it doesn't hurt that the patch removes the device locking -- which was formerly needed in order to know for certain which config was indeed current. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index c783cb1..5e1f5d5 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -588,35 +588,33 @@ read_descriptors(struct kobject *kobj, struct bin_attribute *attr, container_of(kobj, struct device, kobj)); size_t nleft = count; size_t srclen, n; + int cfgno; + void *src; - usb_lock_device(udev); - - /* The binary attribute begins with the device descriptor */ - srclen = sizeof(struct usb_device_descriptor); - if (off < srclen) { - n = min_t(size_t, nleft, srclen - off); - memcpy(buf, off + (char *) &udev->descriptor, n); - nleft -= n; - buf += n; - off = 0; - } else { - off -= srclen; - } - - /* Then follows the raw descriptor entry for the current - * configuration (config plus subsidiary descriptors). + /* The binary attribute begins with the device descriptor. + * Following that are the raw descriptor entries for all the + * configurations (config plus subsidiary descriptors). */ - if (udev->actconfig) { - int cfgno = udev->actconfig - udev->config; - - srclen = __le16_to_cpu(udev->actconfig->desc.wTotalLength); + for (cfgno = -1; cfgno < udev->descriptor.bNumConfigurations && + nleft > 0; ++cfgno) { + if (cfgno < 0) { + src = &udev->descriptor; + srclen = sizeof(struct usb_device_descriptor); + } else { + src = udev->rawdescriptors[cfgno]; + srclen = __le16_to_cpu(udev->config[cfgno].desc. + wTotalLength); + } if (off < srclen) { - n = min_t(size_t, nleft, srclen - off); - memcpy(buf, off + udev->rawdescriptors[cfgno], n); + n = min(nleft, srclen - (size_t) off); + memcpy(buf, src + off, n); nleft -= n; + buf += n; + off = 0; + } else { + off -= srclen; } } - usb_unlock_device(udev); return count - nleft; } -- cgit v0.10.2 From a8e5177583e975fc1f7c621c93956f494df9b979 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:58:11 -0400 Subject: USB: EHCI: fix up root-hub TT mess This patch (as1095) cleans up the HCD glue and several of the EHCI bus-glue files. The ehci->is_tdi_rh_tt flag is redundant, since it means the same thing as the hcd->has_tt flag, so it is removed and the other flag used in its place. Some of the bus-glue files didn't get the relinquish_port method added to their hc_driver structures. Although that routine currently doesn't do anything for controllers with an integrated TT, in the future it might. So the patch adds it where it is missing. Lastly, some of the bus-glue files have erroneous entries for their hc_driver's suspend and resume methods. These method pointers are specific to PCI and shouldn't be used otherwise. (The patch also includes an invisible whitespace fix.) Signed-off-by: Alan Stern Acked-by: David Brownell diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 6d9bed6..4843062 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -269,7 +269,7 @@ static int ehci_fsl_setup(struct usb_hcd *hcd) if (retval) return retval; - ehci->is_tdi_rh_tt = 1; + hcd->has_tt = 1; ehci->sbrn = 0x20; @@ -295,10 +295,6 @@ static const struct hc_driver ehci_fsl_hc_driver = { */ .reset = ehci_fsl_setup, .start = ehci_run, -#ifdef CONFIG_PM - .suspend = ehci_bus_suspend, - .resume = ehci_bus_resume, -#endif .stop = ehci_stop, .shutdown = ehci_shutdown, diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index 601c879..539257f 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -26,7 +26,7 @@ static int ixp4xx_ehci_init(struct usb_hcd *hcd) + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ehci->is_tdi_rh_tt = 1; + hcd->has_tt = 1; ehci_reset(ehci); retval = ehci_init(hcd); @@ -58,6 +58,7 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, #endif + .relinquish_port = ehci_relinquish_port, }; static int ixp4xx_ehci_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 3adfda8..9c5266d 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -139,10 +139,6 @@ static const struct hc_driver ehci_orion_hc_driver = { */ .reset = ehci_orion_setup, .start = ehci_run, -#ifdef CONFIG_PM - .suspend = ehci_bus_suspend, - .resume = ehci_bus_resume, -#endif .stop = ehci_stop, .shutdown = ehci_shutdown, @@ -165,6 +161,7 @@ static const struct hc_driver ehci_orion_hc_driver = { .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, + .relinquish_port = ehci_relinquish_port, }; static void __init @@ -250,7 +247,7 @@ static int __init ehci_orion_drv_probe(struct platform_device *pdev) ehci->regs = hcd->regs + 0x100 + HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ehci->is_tdi_rh_tt = 1; + hcd->has_tt = 1; ehci->sbrn = 0x20; /* diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 5bb7f6b..6ff453f 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -129,7 +129,6 @@ static int ehci_pci_setup(struct usb_hcd *hcd) switch (pdev->vendor) { case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { - ehci->is_tdi_rh_tt = 1; hcd->has_tt = 1; tdi_reset(ehci); } @@ -379,7 +378,7 @@ static const struct hc_driver ehci_pci_hc_driver = { .hub_control = ehci_hub_control, .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, + .relinquish_port = ehci_relinquish_port, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index ee305b1..d94a2ef 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -76,6 +76,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, #endif + .relinquish_port = ehci_relinquish_port, }; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index bf92d20..3cb4823 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -112,7 +112,6 @@ struct ehci_hcd { /* one per controller */ u32 command; /* SILICON QUIRKS */ - unsigned is_tdi_rh_tt:1; /* TDI roothub with TT */ unsigned no_selective_suspend:1; unsigned has_fsl_port_bug:1; /* FreeScale */ unsigned big_endian_mmio:1; @@ -678,7 +677,7 @@ struct ehci_fstn { * needed (mostly in root hub code). */ -#define ehci_is_TDI(e) ((e)->is_tdi_rh_tt) +#define ehci_is_TDI(e) (ehci_to_hcd(e)->has_tt) /* Returns the speed of a device attached to a port on the root hub. */ static inline unsigned int -- cgit v0.10.2 From 3a31155cfff0935e4b178f3dca733d2d60d2eb8d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:58:29 -0400 Subject: USB: EHCI: suppress unwanted error messages This patch (as1096) fixes an annoying problem: When a full-speed or low-speed device is plugged into an EHCI controller, it fails to enumerate at high speed and then is handed over to the companion controller. But usbcore logs a misleading and unwanted error message when the high-speed enumeration fails. The patch adds a new HCD method, port_handed_over, which asks whether a port has been handed over to a companion controller. If it has, the error message is suppressed. Signed-off-by: Alan Stern CC: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 1e4b81e..a0bf5df 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -213,6 +213,8 @@ struct hc_driver { /* force handover of high-speed port to full-speed companion */ void (*relinquish_port)(struct usb_hcd *, int); + /* has a port been handed over to a companion? */ + int (*port_handed_over)(struct usb_hcd *, int); }; extern int usb_hcd_link_urb_to_ep(struct usb_hcd *hcd, struct urb *urb); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 1a3d287..8eb4da3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2753,7 +2753,11 @@ loop: if ((status == -ENOTCONN) || (status == -ENOTSUPP)) break; } - dev_err(hub_dev, "unable to enumerate USB device on port %d\n", port1); + if (hub->hdev->parent || + !hcd->driver->port_handed_over || + !(hcd->driver->port_handed_over)(hcd, port1)) + dev_err(hub_dev, "unable to enumerate USB device on port %d\n", + port1); done: hub_port_disable(hub, port1, 1); diff --git a/drivers/usb/host/ehci-au1xxx.c b/drivers/usb/host/ehci-au1xxx.c index 8b5f991..08a4335 100644 --- a/drivers/usb/host/ehci-au1xxx.c +++ b/drivers/usb/host/ehci-au1xxx.c @@ -223,6 +223,7 @@ static const struct hc_driver ehci_au1xxx_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 4843062..7370d61 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -318,6 +318,7 @@ static const struct hc_driver ehci_fsl_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ehci_fsl_drv_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 382587c..d613dc9 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -875,3 +875,13 @@ static void ehci_relinquish_port(struct usb_hcd *hcd, int portnum) set_owner(ehci, --portnum, PORT_OWNER); } +static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + u32 __iomem *reg; + + if (ehci_is_TDI(ehci)) + return 0; + reg = &ehci->regs->port_status[portnum - 1]; + return ehci_readl(ehci, reg) & PORT_OWNER; +} diff --git a/drivers/usb/host/ehci-ixp4xx.c b/drivers/usb/host/ehci-ixp4xx.c index 539257f..9d042f2 100644 --- a/drivers/usb/host/ehci-ixp4xx.c +++ b/drivers/usb/host/ehci-ixp4xx.c @@ -59,6 +59,7 @@ static const struct hc_driver ixp4xx_ehci_hc_driver = { .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ixp4xx_ehci_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 9c5266d..ab625f0 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -162,6 +162,7 @@ static const struct hc_driver ehci_orion_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static void __init diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 6ff453f..c46a58f 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -379,6 +379,7 @@ static const struct hc_driver ehci_pci_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; /*-------------------------------------------------------------------------*/ diff --git a/drivers/usb/host/ehci-ppc-of.c b/drivers/usb/host/ehci-ppc-of.c index d94a2ef..b018dee 100644 --- a/drivers/usb/host/ehci-ppc-of.c +++ b/drivers/usb/host/ehci-ppc-of.c @@ -77,6 +77,7 @@ static const struct hc_driver ehci_ppc_of_hc_driver = { .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; diff --git a/drivers/usb/host/ehci-ppc-soc.c b/drivers/usb/host/ehci-ppc-soc.c index 6c76036..529590e 100644 --- a/drivers/usb/host/ehci-ppc-soc.c +++ b/drivers/usb/host/ehci-ppc-soc.c @@ -163,6 +163,7 @@ static const struct hc_driver ehci_ppc_soc_hc_driver = { .bus_suspend = ehci_bus_suspend, .bus_resume = ehci_bus_resume, .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ehci_hcd_ppc_soc_drv_probe(struct platform_device *pdev) diff --git a/drivers/usb/host/ehci-ps3.c b/drivers/usb/host/ehci-ps3.c index 6978222..37e6abe 100644 --- a/drivers/usb/host/ehci-ps3.c +++ b/drivers/usb/host/ehci-ps3.c @@ -73,6 +73,7 @@ static const struct hc_driver ps3_ehci_hc_driver = { .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, + .port_handed_over = ehci_port_handed_over, }; static int ps3_ehci_probe(struct ps3_system_bus_device *dev) -- cgit v0.10.2 From d1f114d12bb4db3147e1b1342ae31083c5a79c84 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:58:58 -0400 Subject: USB: EHCI: fix remote-wakeup regression This patch (as1097) fixes a bug in the remote-wakeup handling in ehci-hcd. The driver currently does not keep track of whether the change-suspend feature is enabled for each port; the feature is automatically reset the first time it is read. But recent changes to the hub driver require that the feature be read at least twice in order to work properly. A bit-vector is added for storing the change-suspend feature values. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index d613dc9..740835b 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -609,7 +609,7 @@ static int ehci_hub_control ( } break; case USB_PORT_FEAT_C_SUSPEND: - /* we auto-clear this feature */ + clear_bit(wIndex, &ehci->port_c_suspend); break; case USB_PORT_FEAT_POWER: if (HCS_PPC (ehci->hcs_params)) @@ -688,7 +688,7 @@ static int ehci_hub_control ( /* resume completed? */ else if (time_after_eq(jiffies, ehci->reset_done[wIndex])) { - status |= 1 << USB_PORT_FEAT_C_SUSPEND; + set_bit(wIndex, &ehci->port_c_suspend); ehci->reset_done[wIndex] = 0; /* stop resume signaling */ @@ -765,6 +765,8 @@ static int ehci_hub_control ( status |= 1 << USB_PORT_FEAT_RESET; if (temp & PORT_POWER) status |= 1 << USB_PORT_FEAT_POWER; + if (test_bit(wIndex, &ehci->port_c_suspend)) + status |= 1 << USB_PORT_FEAT_C_SUSPEND; #ifndef VERBOSE_DEBUG if (status & ~0xffff) /* only if wPortChange is interesting */ diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 3cb4823..35a0309 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -97,6 +97,8 @@ struct ehci_hcd { /* one per controller */ dedicated to the companion controller */ unsigned long owned_ports; /* which ports are owned by the companion during a bus suspend */ + unsigned long port_c_suspend; /* which ports have + the change-suspend feature turned on */ /* per-HC memory pools (could be per-bus, but ...) */ struct dma_pool *qh_pool; /* qh per active urb */ -- cgit v0.10.2 From b40e43fcc532fa44a375a37d592e32cd0d50fe7a Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:59:10 -0400 Subject: USB: EHCI: fix bug in Iso scheduling This patch (as1098) changes the way ehci-hcd schedules its periodic Iso transfers. That the current scheduling code is wrong is clear on the face of it: Sometimes it returns -EL2NSYNC (meaning that an URB couldn't be scheduled because it was submitted too late), but it does this even when the URB_ISO_ASAP flag is set (meaning the URB should be scheduled as soon as possible). The new code properly implements as-soon-as-possible scheduling, assigning the next unexpired slot as the URB's starting point. It also is more careful about checking for Iso URB completion: It doesn't bother to check for activity during frames that are already over, and it allows for the possibility that some of the URB's packets may have raced the hardware when they were submitted and so never got used (the packet status is set to -EXDEV). This fixes problems several people have experienced with USB video applications. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index be575e4..b7853c8 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1349,18 +1349,27 @@ iso_stream_schedule ( /* when's the last uframe this urb could start? */ max = now + mod; - /* typical case: reuse current schedule. stream is still active, - * and no gaps from host falling behind (irq delays etc) + /* Typical case: reuse current schedule, stream is still active. + * Hopefully there are no gaps from the host falling behind + * (irq delays etc), but if there are we'll take the next + * slot in the schedule, implicitly assuming URB_ISO_ASAP. */ if (likely (!list_empty (&stream->td_list))) { start = stream->next_uframe; if (start < now) start += mod; - if (likely ((start + sched->span) < max)) - goto ready; - /* else fell behind; someday, try to reschedule */ - status = -EL2NSYNC; - goto fail; + + /* Fell behind (by up to twice the slop amount)? */ + if (start >= max - 2 * 8 * SCHEDULE_SLOP) + start += stream->interval * DIV_ROUND_UP( + max - start, stream->interval) - mod; + + /* Tried to schedule too far into the future? */ + if (unlikely((start + sched->span) >= max)) { + status = -EFBIG; + goto fail; + } + goto ready; } /* need to schedule; when's the next (u)frame we could start? @@ -1613,6 +1622,9 @@ itd_complete ( } else if (likely ((t & EHCI_ISOC_ACTIVE) == 0)) { desc->status = 0; desc->actual_length = EHCI_ITD_LENGTH (t); + } else { + /* URB was too late */ + desc->status = -EXDEV; } } @@ -2095,7 +2107,7 @@ done: static void scan_periodic (struct ehci_hcd *ehci) { - unsigned frame, clock, now_uframe, mod; + unsigned now_uframe, frame, clock, clock_frame, mod; unsigned modified; mod = ehci->periodic_size << 3; @@ -2111,6 +2123,7 @@ scan_periodic (struct ehci_hcd *ehci) else clock = now_uframe + mod - 1; clock %= mod; + clock_frame = clock >> 3; for (;;) { union ehci_shadow q, *q_p; @@ -2157,22 +2170,26 @@ restart: case Q_TYPE_ITD: /* If this ITD is still active, leave it for * later processing ... check the next entry. + * No need to check for activity unless the + * frame is current. */ - rmb (); - for (uf = 0; uf < 8 && live; uf++) { - if (0 == (q.itd->hw_transaction [uf] - & ITD_ACTIVE(ehci))) - continue; - incomplete = true; - q_p = &q.itd->itd_next; - hw_p = &q.itd->hw_next; - type = Q_NEXT_TYPE(ehci, + if (frame == clock_frame && live) { + rmb(); + for (uf = 0; uf < 8; uf++) { + if (q.itd->hw_transaction[uf] & + ITD_ACTIVE(ehci)) + break; + } + if (uf < 8) { + incomplete = true; + q_p = &q.itd->itd_next; + hw_p = &q.itd->hw_next; + type = Q_NEXT_TYPE(ehci, q.itd->hw_next); - q = *q_p; - break; + q = *q_p; + break; + } } - if (uf < 8 && live) - break; /* Take finished ITDs out of the schedule * and process them: recycle, maybe report @@ -2189,9 +2206,12 @@ restart: case Q_TYPE_SITD: /* If this SITD is still active, leave it for * later processing ... check the next entry. + * No need to check for activity unless the + * frame is current. */ - if ((q.sitd->hw_results & SITD_ACTIVE(ehci)) - && live) { + if (frame == clock_frame && live && + (q.sitd->hw_results & + SITD_ACTIVE(ehci))) { incomplete = true; q_p = &q.sitd->sitd_next; hw_p = &q.sitd->hw_next; @@ -2260,6 +2280,7 @@ restart: /* rescan the rest of this frame, then ... */ clock = now; + clock_frame = clock >> 3; } else { now_uframe++; now_uframe %= mod; -- cgit v0.10.2 From fa38dfcc56b5f6cce787f9aaa5d1830509213802 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 20 May 2008 16:59:33 -0400 Subject: USB: EHCI: fix performance regression This patch (as1099) fixes a performance regression in ehci-hcd. The fundamental problem is that queue headers get removed from the schedule too quickly, since the code checks for a counter advancing rather than making an actual time-based check. The latency involved in removing the queue header and then relinking it can severely degrade certain kinds of workloads. The patch replaces a simple counter with a timestamp derived from the controller's uframe value. In addition, the delay for unlinking an idle queue header is increased from 5 ms to 10 ms; since some controllers (nVidia) have a latency of up to 1 ms for unlinking, this reduces the relative impact from 20% to 10%. Finally, a logical error left over from the IAA watchdog-timer conversion is corrected. Now the driver will always either unlink an idle queue header or set up a timer to unlink it later. The old code would sometimes fail to do either. Signed-off-by: Alan Stern Cc: David Brownell Cc: Leonid Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 369a8a5..3e3c5d3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -84,7 +84,8 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ -#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ +#define EHCI_SHRINK_JIFFIES (HZ/100) /* async qh unlink delay */ +#define EHCI_SHRINK_UFRAMES (10*8) /* same value in uframes */ /* Initial IRQ latency: faster than hw default */ static int log2_irq_thresh = 0; // 0 to 6 diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index b85b541..5200481 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1116,8 +1116,7 @@ static void scan_async (struct ehci_hcd *ehci) struct ehci_qh *qh; enum ehci_timer_action action = TIMER_IO_WATCHDOG; - if (!++(ehci->stamp)) - ehci->stamp++; + ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index); timer_action_done (ehci, TIMER_ASYNC_SHRINK); rescan: qh = ehci->async->qh_next.qh; @@ -1148,12 +1147,14 @@ rescan: * doesn't stay idle for long. * (plus, avoids some kind of re-activation race.) */ - if (list_empty (&qh->qtd_list)) { - if (qh->stamp == ehci->stamp) + if (list_empty(&qh->qtd_list) && + qh->qh_state == QH_STATE_LINKED) { + if (!ehci->reclaim && + ((ehci->stamp - qh->stamp) & 8191) >= + EHCI_SHRINK_UFRAMES) + start_unlink_async(ehci, qh); + else action = TIMER_ASYNC_SHRINK; - else if (!ehci->reclaim - && qh->qh_state == QH_STATE_LINKED) - start_unlink_async (ehci, qh); } qh = qh->qh_next.qh; -- cgit v0.10.2 From c7257bd2ecb7b4cc42f9f152c7c059258d434169 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 21 May 2008 13:53:01 -0400 Subject: USB: usb-storage: unusual_devs update for Cypress ATACB This patch (as1101) updates the unusual_devs entry for the Cypress ATACB pass-through. The protocol field is changed from US_PR_BULK to US_PR_DEVICE, since the Cypress devices already set bInterfaceProtocol to Bulk-only. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1b09578..5d56893 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -405,7 +405,7 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, "Cypress", "Cypress AT2LP", - US_SC_CYP_ATACB, US_PR_BULK, NULL, + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), #endif -- cgit v0.10.2 From c5f23b0e08d84f4efc20dece04d7b6796dcc6774 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Mon, 26 May 2008 21:33:58 +0200 Subject: USB: Fix M600i unusual_devs entry MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It turns out that the unusual_devs entry for the Motorola M600i needs another flag. This patch adds it. Thanks to Atte AndrĂ© Jensen . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 5d56893..599bb12 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1522,7 +1522,7 @@ UNUSUAL_DEV( 0x0fce, 0xe031, 0x0000, 0x0000, "Sony Ericsson", "M600i", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), + US_FL_IGNORE_RESIDUE | US_FL_FIX_CAPACITY ), /* Reported by Kevin Cernekee * Tested on hardware version 1.10. -- cgit v0.10.2 From 2a8bc9e7cfb1761a62ea897b407ea13ec887fd0c Mon Sep 17 00:00:00 2001 From: Javier Smaldone Date: Mon, 26 May 2008 21:44:00 +0200 Subject: USB: Add support for ROKR W5 in unusual_devs.h This patch adds support for rev 2 of an existing unusual_devs entry enabling ROKR W5s to work. Greg, please apply. From: Javier Smaldone Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 599bb12..45fe366 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1716,10 +1716,12 @@ UNUSUAL_DEV( 0x22b8, 0x3010, 0x0001, 0x0001, /* * Patch by Pete Zaitcev * Report by Mark Patton. Red Hat bz#208928. + * Added support for rev 0x0002 (Motorola ROKR W5) + * by Javier Smaldone */ -UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0001, +UNUSUAL_DEV( 0x22b8, 0x4810, 0x0001, 0x0002, "Motorola", - "RAZR V3i", + "RAZR V3i/ROKR W5", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), -- cgit v0.10.2 From 598eff6d2f3b8805232edc5f4a6b0c1e698dc482 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ren=C3=A9=20Rebe?= Date: Tue, 27 May 2008 09:05:46 +0200 Subject: USB: add another scanner quirk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Like the HP53{00,70} scanner other devices of the OEM Avision require the USB_QUIRK_STRING_FETCH_255 to correct set a configuration with "recent" Linux kernels. Signed-off-by: RenĂ© Rebe Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 2e20193..3da1ab4 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Avision AV600U */ + { USB_DEVICE(0x0638, 0x0a13), .driver_info = + USB_QUIRK_STRING_FETCH_255 }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v0.10.2 From 4be2fa186d54758296d30c565d7b5111dd45b000 Mon Sep 17 00:00:00 2001 From: Steve Murphy Date: Fri, 23 May 2008 23:39:05 +0530 Subject: USB: pl2303: another product ID I've just got a USB GPRS/EDGE modem branded Manufacturer Micromax Model MMX610U (see http://www.airtel.in/level2_t3data.aspx?path=1/106/179) working by adding another product ID to pl2303. Modem info reports same module as Max Arnold's i.e.SIMCOM SIM600 but with product ID 0x0612 (cf Ox0611). From: Steve Murphy Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 234c5ee..103195a 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -56,6 +56,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_RSAQ3) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index 3bdefe0..cff160a 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -14,6 +14,7 @@ #define PL2303_PRODUCT_ID_PHAROS 0xaaa0 #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 #define PL2303_PRODUCT_ID_ALDIGA 0x0611 +#define PL2303_PRODUCT_ID_MMX 0x0612 #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 -- cgit v0.10.2 From a7f3872c43b8001f01000f79583d422c6995f98d Mon Sep 17 00:00:00 2001 From: Michael Karcher Date: Wed, 28 May 2008 23:58:18 +0200 Subject: USB: usb-serial: option: Don't match Huawei driver CD images Add the interface info matching to all Huawei cards, as they all also contain a Mass Storage Device interface (usually containing Windows drivers) which should not get bound by this driver. See also drivers/usb/storage/unusual_devs.h Signed-off-by: Michael Karcher Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6cecd2c..43cfde8 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -236,25 +236,25 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418) }, - { USB_DEVICE(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1401, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1403, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1405, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1406, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1408, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1409, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1410, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1411, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1412, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1413, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1414, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1415, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1416, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1417, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1418, 0xff, 0xff, 0xff) }, + { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E1419, 0xff, 0xff, 0xff) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_9508) }, { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V640) }, /* Novatel Merlin V640/XV620 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_V620) }, /* Novatel Merlin V620/S620 */ -- cgit v0.10.2 From 185e3dead35dacb79c8cca1073fd67a26d09a0d7 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Thu, 29 May 2008 21:04:45 +0800 Subject: USB: fsl_usb2_udc: fix recursive lock UDC needs to release lock before calling out to gadget driver, since it may need to reenter. The change fixes kernel BUG observed on rt kernel. > kernel BUG at kernel/rtmutex.c:683! > stopped custom tracer. > Oops: Exception in kernel mode, sig: 5 [#1] > PREEMPT MPC834x ITX > NIP: c021629c LR: c0216270 CTR: 00000000 > REGS: df761d70 TRAP: 0700 Not tainted (2.6.23.9-rt13) > MSR: 00021032 CR: 28000022 XER: 00000000 > TASK = df632080[241] 'IRQ-38' THREAD: df760000 > GPR00: 00000001 df761e20 df632080 00000000 11111111 00000000 df761e6c > 00000000 > GPR08: df761e48 00000000 df761e50 00000000 80000000 ede5cdde 1fffd000 > 00800000 > GPR16: ffffffff 00000000 007fff00 00000040 00000000 007ffeb0 00000000 > 1fff8b08 > GPR24: 00000000 00000026 00000000 df79a320 c026b2e8 c02240bc 00009032 > df79a320 > NIP [c021629c] rt_spin_lock_slowlock+0x9c/0x200 > LR [c0216270] rt_spin_lock_slowlock+0x70/0x200 > Call Trace: > [df761e20] [c0216270] rt_spin_lock_slowlock+0x70/0x200 (unreliable) > [df761e90] [c0182828] fsl_ep_disable+0xcc/0x154 > [df761eb0] [c0184d30] eth_reset_config+0x88/0x1d0 > [df761ed0] [c0184ec0] eth_disconnect+0x48/0x64 > [df761ef0] [c01831a4] reset_queues+0x60/0x78 > [df761f00] [c0183b74] fsl_udc_irq+0x9b8/0xa58 > [df761f50] [c003ef30] handle_IRQ_event+0x64/0x100 > [df761f80] [c003f758] thread_simple_irq+0x6c/0xc8 > [df761fa0] [c003f888] do_irqd+0xd4/0x2e4 > [df761fd0] [c0032284] kthread+0x50/0x8c > [df761ff0] [c000f9b4] kernel_thread+0x44/0x60 Signed-off-by: Li Yang Cc: Eugene T. Bordenkircher Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index 651b827..1868754 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1627,7 +1627,9 @@ static int reset_queues(struct fsl_udc *udc) udc_reset_ep_queue(udc, pipe); /* report disconnect; the driver is already quiesced */ + spin_unlock(&udc->lock); udc->driver->disconnect(&udc->gadget); + spin_lock(&udc->lock); return 0; } -- cgit v0.10.2 From bb7e6984ecaebe6989d0e781e303469255871432 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 29 May 2008 19:43:27 -0700 Subject: Revert "USB: EHCI: fix performance regression" This reverts commit fa38dfcc56b5f6cce787f9aaa5d1830509213802. It wasn't really a regression and David and Alan are still working through the issues reported. Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 3e3c5d3..369a8a5 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -84,8 +84,7 @@ static const char hcd_name [] = "ehci_hcd"; #define EHCI_IAA_MSECS 10 /* arbitrary */ #define EHCI_IO_JIFFIES (HZ/10) /* io watchdog > irq_thresh */ #define EHCI_ASYNC_JIFFIES (HZ/20) /* async idle timeout */ -#define EHCI_SHRINK_JIFFIES (HZ/100) /* async qh unlink delay */ -#define EHCI_SHRINK_UFRAMES (10*8) /* same value in uframes */ +#define EHCI_SHRINK_JIFFIES (HZ/200) /* async qh unlink delay */ /* Initial IRQ latency: faster than hw default */ static int log2_irq_thresh = 0; // 0 to 6 diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 5200481..b85b541 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1116,7 +1116,8 @@ static void scan_async (struct ehci_hcd *ehci) struct ehci_qh *qh; enum ehci_timer_action action = TIMER_IO_WATCHDOG; - ehci->stamp = ehci_readl(ehci, &ehci->regs->frame_index); + if (!++(ehci->stamp)) + ehci->stamp++; timer_action_done (ehci, TIMER_ASYNC_SHRINK); rescan: qh = ehci->async->qh_next.qh; @@ -1147,14 +1148,12 @@ rescan: * doesn't stay idle for long. * (plus, avoids some kind of re-activation race.) */ - if (list_empty(&qh->qtd_list) && - qh->qh_state == QH_STATE_LINKED) { - if (!ehci->reclaim && - ((ehci->stamp - qh->stamp) & 8191) >= - EHCI_SHRINK_UFRAMES) - start_unlink_async(ehci, qh); - else + if (list_empty (&qh->qtd_list)) { + if (qh->stamp == ehci->stamp) action = TIMER_ASYNC_SHRINK; + else if (!ehci->reclaim + && qh->qh_state == QH_STATE_LINKED) + start_unlink_async (ehci, qh); } qh = qh->qh_next.qh; -- cgit v0.10.2 From 413c239fad68258157f903b3ffd9bfcc53f5e34b Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 30 May 2008 10:16:40 +1000 Subject: driver-core: prepare for 2.6.27 api change by adding dev_set_name Create the dev_set_name function now so that various subsystems can start changing over to it before other changes in 2.6.27 will make it compulsory. Cc: Kay Sievers Signed-off-by: Stephen Rothwell Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/core.c b/drivers/base/core.c index 72eccae..422cfca 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -760,6 +760,21 @@ static void device_remove_class_symlinks(struct device *dev) } /** + * dev_set_name - set a device name + * @dev: device + */ +int dev_set_name(struct device *dev, const char *fmt, ...) +{ + va_list vargs; + + va_start(vargs, fmt); + vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs); + va_end(vargs); + return 0; +} +EXPORT_SYMBOL_GPL(dev_set_name); + +/** * device_add - add device to device hierarchy. * @dev: device. * diff --git a/include/linux/device.h b/include/linux/device.h index 14616e8..6a2d04c 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -385,6 +385,9 @@ static inline const char *dev_name(struct device *dev) return dev->bus_id; } +extern int dev_set_name(struct device *dev, const char *name, ...) + __attribute__((format(printf, 2, 3))); + #ifdef CONFIG_NUMA static inline int dev_to_node(struct device *dev) { -- cgit v0.10.2 From e27810f11340987df123a99eb9ae14c054a55639 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:40 -0500 Subject: lguest: use ioremap_cache, not ioremap Thanks to Jon Corbet & LWN. Only took me a day to join the dots. Host->Guest netcat before (with unnecessily large receive buffers): 1073741824 bytes (1.1 GB) copied, 24.7528 seconds, 43.4 MB/s After: 1073741824 bytes (1.1 GB) copied, 17.6369 seconds, 60.9 MB/s Signed-off-by: Rusty Russell diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 8080249..f4fdf35 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -27,7 +27,7 @@ static unsigned int dev_index; * __iomem to quieten sparse. */ static inline void *lguest_map(unsigned long phys_addr, unsigned long pages) { - return (__force void *)ioremap(phys_addr, PAGE_SIZE*pages); + return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages); } static inline void lguest_unmap(void *addr) -- cgit v0.10.2 From ac9d463afb1ca2434335351f3b7d9e4c8f8470e9 Mon Sep 17 00:00:00 2001 From: Chris Lalancette Date: Fri, 30 May 2008 15:09:41 -0500 Subject: Fix crash in virtio_blk during modprobe ; rmmod ; modprobe Fix a modprobe virtio_blk ; rmmod virtio_blk ; modprobe virtio_blk crash; this was basically because we weren't doing "del_gendisk()" in the remove path. Signed-off-by: Chris Lalancette Signed-off-by: Rusty Russell (moved del_gendisk up) diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index 84e064f..c4804f3 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -311,6 +311,7 @@ static void virtblk_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); + del_gendisk(vblk->disk); blk_cleanup_queue(vblk->disk->queue); put_disk(vblk->disk); mempool_destroy(vblk->pool); -- cgit v0.10.2 From 2ad3cfbac58d0a6c6e65aafd9e0e757ca3d35292 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:41 -0500 Subject: virtio: bus_id for devices should contain 'virtio' Chris Lalancette points out that virtio.c sets all device names to '0', '1', etc, which looks silly in /proc/interrupts. We change this from '%d' to 'virtio%d'. Signed-off-by: Rusty Russell Cc: Christian Borntraeger Cc: Martin Schwidefsky Cc: Carsten Otte Cc: Heiko Carstens Cc: Chris Lalancette Cc: Anthony Liguori diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 1386678..59918df 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -166,7 +166,7 @@ int register_virtio_device(struct virtio_device *dev) int err; dev->dev.bus = &virtio_bus; - sprintf(dev->dev.bus_id, "%u", dev->index); + sprintf(dev->dev.bus_id, "virtio%u", dev->index); /* We always start by resetting the device, in case a previous * driver messed it up. This also tests that code path a little. */ -- cgit v0.10.2 From 5610bd1524332fe7d651eb56cc780e32763a2ac3 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:42 -0500 Subject: virtio: virtio_pci should not set bus_id. The common virtio code sets the bus_id, overriding anything virtio_pci sets anyway. Signed-off-by: Rusty Russell Cc: Christian Borntraeger Cc: Martin Schwidefsky Cc: Carsten Otte Cc: Heiko Carstens Cc: Chris Lalancette Cc: Anthony Liguori diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 27e9fc9..2913c2f 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -325,7 +325,6 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, if (vp_dev == NULL) return -ENOMEM; - snprintf(vp_dev->vdev.dev.bus_id, BUS_ID_SIZE, "virtio%d", dev_index); vp_dev->vdev.index = dev_index; dev_index++; -- cgit v0.10.2 From b769f579081943f14e0ff03b7b0bd3a11cf14625 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:42 -0500 Subject: virtio: set device index in common code. Anthony Liguori points out that three different transports use the virtio code, but each one keeps its own counter to set the virtio_device's index field. In theory (though not in current practice) this means that names could be duplicated, and that risk grows as more transports are created. So we move the selection of the unique virtio_device.index into the common code in virtio.c, which has the side-benefit of removing duplicate code. The only complexity is that lguest and S/390 use the index to uniquely identify the device in case of catastrophic failure before register_virtio_device() is called: now we use the offset within the descriptor page as a unique identifier for the printks. Signed-off-by: Rusty Russell Cc: Christian Borntraeger Cc: Martin Schwidefsky Cc: Carsten Otte Cc: Heiko Carstens Cc: Chris Lalancette Cc: Anthony Liguori diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index f4fdf35..1a8de57 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -20,9 +20,6 @@ /* The pointer to our (page) of device descriptions. */ static void *lguest_devices; -/* Unique numbering for lguest devices. */ -static unsigned int dev_index; - /* For Guests, device memory can be used as normal memory, so we cast away the * __iomem to quieten sparse. */ static inline void *lguest_map(unsigned long phys_addr, unsigned long pages) @@ -325,8 +322,10 @@ static struct device lguest_root = { * As Andrew Tridgell says, "Untested code is buggy code". * * It's worth reading this carefully: we start with a pointer to the new device - * descriptor in the "lguest_devices" page. */ -static void add_lguest_device(struct lguest_device_desc *d) + * descriptor in the "lguest_devices" page, and the offset into the device + * descriptor page so we can uniquely identify it if things go badly wrong. */ +static void add_lguest_device(struct lguest_device_desc *d, + unsigned int offset) { struct lguest_device *ldev; @@ -334,18 +333,14 @@ static void add_lguest_device(struct lguest_device_desc *d) * it. */ ldev = kzalloc(sizeof(*ldev), GFP_KERNEL); if (!ldev) { - printk(KERN_EMERG "Cannot allocate lguest dev %u\n", - dev_index++); + printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n", + offset, d->type); return; } /* This devices' parent is the lguest/ dir. */ ldev->vdev.dev.parent = &lguest_root; /* We have a unique device index thanks to the dev_index counter. */ - ldev->vdev.index = dev_index++; - /* The device type comes straight from the descriptor. There's also a - * device vendor field in the virtio_device struct, which we leave as - * 0. */ ldev->vdev.id.device = d->type; /* We have a simple set of routines for querying the device's * configuration information and setting its status. */ @@ -357,8 +352,8 @@ static void add_lguest_device(struct lguest_device_desc *d) * virtio_device and calls device_register(). This makes the bus * infrastructure look for a matching driver. */ if (register_virtio_device(&ldev->vdev) != 0) { - printk(KERN_ERR "Failed to register lguest device %u\n", - ldev->vdev.index); + printk(KERN_ERR "Failed to register lguest dev %u type %u\n", + offset, d->type); kfree(ldev); } } @@ -379,7 +374,7 @@ static void scan_devices(void) break; printk("Device at %i has size %u\n", i, desc_size(d)); - add_lguest_device(d); + add_lguest_device(d, i); } } diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 9f55ce6..5ab3434 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -31,11 +31,6 @@ */ static void *kvm_devices; -/* - * Unique numbering for kvm devices. - */ -static unsigned int dev_index; - struct kvm_device { struct virtio_device vdev; struct kvm_device_desc *desc; @@ -250,26 +245,25 @@ static struct device kvm_root = { * adds a new device and register it with virtio * appropriate drivers are loaded by the device model */ -static void add_kvm_device(struct kvm_device_desc *d) +static void add_kvm_device(struct kvm_device_desc *d, unsigned int offset) { struct kvm_device *kdev; kdev = kzalloc(sizeof(*kdev), GFP_KERNEL); if (!kdev) { - printk(KERN_EMERG "Cannot allocate kvm dev %u\n", - dev_index++); + printk(KERN_EMERG "Cannot allocate kvm dev %u type %u\n", + offset, d->type); return; } kdev->vdev.dev.parent = &kvm_root; - kdev->vdev.index = dev_index++; kdev->vdev.id.device = d->type; kdev->vdev.config = &kvm_vq_configspace_ops; kdev->desc = d; if (register_virtio_device(&kdev->vdev) != 0) { - printk(KERN_ERR "Failed to register kvm device %u\n", - kdev->vdev.index); + printk(KERN_ERR "Failed to register kvm device %u type %u\n", + offset, d->type); kfree(kdev); } } @@ -289,7 +283,7 @@ static void scan_devices(void) if (d->type == 0) break; - add_kvm_device(d); + add_kvm_device(d, i); } } diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 59918df..0f3c2bb 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -2,6 +2,9 @@ #include #include +/* Unique numbering for virtio devices. */ +static unsigned int dev_index; + static ssize_t device_show(struct device *_d, struct device_attribute *attr, char *buf) { @@ -166,6 +169,9 @@ int register_virtio_device(struct virtio_device *dev) int err; dev->dev.bus = &virtio_bus; + + /* Assign a unique device index and hence name. */ + dev->index = dev_index++; sprintf(dev->dev.bus_id, "virtio%u", dev->index); /* We always start by resetting the device, in case a previous diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 2913c2f..eae72363 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -78,9 +78,6 @@ static struct device virtio_pci_root = { .bus_id = "virtio-pci", }; -/* Unique numbering for devices under the kvm root */ -static unsigned int dev_index; - /* Convert a generic virtio device to our structure */ static struct virtio_pci_device *to_vp_device(struct virtio_device *vdev) { @@ -325,9 +322,6 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, if (vp_dev == NULL) return -ENOMEM; - vp_dev->vdev.index = dev_index; - dev_index++; - vp_dev->vdev.dev.parent = &virtio_pci_root; vp_dev->vdev.config = &virtio_pci_config_ops; vp_dev->pci_dev = pci_dev; -- cgit v0.10.2 From a16ffe93c46dfca211434d00453ebb695025978b Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:42 -0500 Subject: lguest: fix ugly in /proc/interrupts Before: root@ubuntu:~# cat /proc/interrupts CPU0 1: 1672 lguest- virtio0 2: 1 lguest- virtio1 ... After: root@ubuntu:~# cat /proc/interrupts CPU0 1: 2889 lguest-level virtio0 2: 9 lguest-level virtio1 Signed-off-by: Rusty Russell diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c index af65b2d..5c7e2fd 100644 --- a/arch/x86/lguest/boot.c +++ b/arch/x86/lguest/boot.c @@ -582,8 +582,9 @@ static void __init lguest_init_IRQ(void) int vector = FIRST_EXTERNAL_VECTOR + i; if (vector != SYSCALL_VECTOR) { set_intr_gate(vector, interrupt[i]); - set_irq_chip_and_handler(i, &lguest_irq_controller, - handle_level_irq); + set_irq_chip_and_handler_name(i, &lguest_irq_controller, + handle_level_irq, + "level"); } } /* This call is required to set up for 4k stacks, where we have -- cgit v0.10.2 From 3ef536095446552823fc488fec1c5451aab1260d Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 16 May 2008 11:17:03 +0200 Subject: virtio_blk: allow read-only disks Hello Rusty, sometimes it is useful to share a disk (e.g. usr). To avoid file system corruption, the disk should be mounted read-only in that case. This patch adds a new feature flag, that allows the host to specify, if the disk should be considered read-only. Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index c4804f3..dd7ea20 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -260,6 +260,10 @@ static int virtblk_probe(struct virtio_device *vdev) if (virtio_has_feature(vdev, VIRTIO_BLK_F_BARRIER)) blk_queue_ordered(vblk->disk->queue, QUEUE_ORDERED_TAG, NULL); + /* If disk is read-only in the host, the guest should obey */ + if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO)) + set_disk_ro(vblk->disk, 1); + /* Host must always specify the capacity. */ vdev->config->get(vdev, offsetof(struct virtio_blk_config, capacity), &cap, sizeof(cap)); @@ -326,7 +330,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_BLK_F_BARRIER, VIRTIO_BLK_F_SEG_MAX, VIRTIO_BLK_F_SIZE_MAX, - VIRTIO_BLK_F_GEOMETRY, + VIRTIO_BLK_F_GEOMETRY, VIRTIO_BLK_F_RO, }; static struct virtio_driver virtio_blk = { diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index d4695a3..b80919f 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -10,6 +10,7 @@ #define VIRTIO_BLK_F_SIZE_MAX 1 /* Indicates maximum segment size */ #define VIRTIO_BLK_F_SEG_MAX 2 /* Indicates maximum # of segments */ #define VIRTIO_BLK_F_GEOMETRY 4 /* Legacy geometry available */ +#define VIRTIO_BLK_F_RO 5 /* Disk is read-only */ struct virtio_blk_config { -- cgit v0.10.2 From f7f510ec195781c857ab76366a3e1c59e1caae42 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:44 -0500 Subject: virtio: An entropy device, as suggested by hpa. Note that by itself, having a "hardware" random generator does very little: you should probably run "rngd" in your guest to feed this into the kernel entropy pool. Included: virtio_rng: dont use vmalloced addresses for virtio If virtio_rng is build as a module, random_data is an address in vmalloc space. As virtio expects guest real addresses, this can cause any kind of funny behaviour, so lets allocate random_data dynamically with kmalloc. Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index 8d6c208..efd0b4d 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -112,3 +112,12 @@ config HW_RANDOM_PASEMI If unsure, say Y. +config HW_RANDOM_VIRTIO + tristate "VirtIO Random Number Generator support" + depends on HW_RANDOM && VIRTIO + ---help--- + This driver provides kernel-side support for the virtual Random Number + Generator hardware. + + To compile this driver as a module, choose M here: the + module will be called virtio-rng. If unsure, say N. diff --git a/drivers/char/hw_random/Makefile b/drivers/char/hw_random/Makefile index c8b7300..b4940dd 100644 --- a/drivers/char/hw_random/Makefile +++ b/drivers/char/hw_random/Makefile @@ -11,3 +11,4 @@ obj-$(CONFIG_HW_RANDOM_VIA) += via-rng.o obj-$(CONFIG_HW_RANDOM_IXP4XX) += ixp4xx-rng.o obj-$(CONFIG_HW_RANDOM_OMAP) += omap-rng.o obj-$(CONFIG_HW_RANDOM_PASEMI) += pasemi-rng.o +obj-$(CONFIG_HW_RANDOM_VIRTIO) += virtio-rng.o diff --git a/drivers/char/hw_random/virtio-rng.c b/drivers/char/hw_random/virtio-rng.c new file mode 100644 index 0000000..d0e563e --- /dev/null +++ b/drivers/char/hw_random/virtio-rng.c @@ -0,0 +1,155 @@ +/* + * Randomness driver for virtio + * Copyright (C) 2007, 2008 Rusty Russell IBM Corporation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include + +/* The host will fill any buffer we give it with sweet, sweet randomness. We + * give it 64 bytes at a time, and the hwrng framework takes it 4 bytes at a + * time. */ +#define RANDOM_DATA_SIZE 64 + +static struct virtqueue *vq; +static u32 *random_data; +static unsigned int data_left; +static DECLARE_COMPLETION(have_data); + +static void random_recv_done(struct virtqueue *vq) +{ + int len; + + /* We never get spurious callbacks. */ + if (!vq->vq_ops->get_buf(vq, &len)) + BUG(); + + data_left = len / sizeof(random_data[0]); + complete(&have_data); +} + +static void register_buffer(void) +{ + struct scatterlist sg; + + sg_init_one(&sg, random_data, RANDOM_DATA_SIZE); + /* There should always be room for one buffer. */ + if (vq->vq_ops->add_buf(vq, &sg, 0, 1, random_data) != 0) + BUG(); + vq->vq_ops->kick(vq); +} + +/* At least we don't udelay() in a loop like some other drivers. */ +static int virtio_data_present(struct hwrng *rng, int wait) +{ + if (data_left) + return 1; + + if (!wait) + return 0; + + wait_for_completion(&have_data); + return 1; +} + +/* virtio_data_present() must have succeeded before this is called. */ +static int virtio_data_read(struct hwrng *rng, u32 *data) +{ + BUG_ON(!data_left); + + *data = random_data[--data_left]; + + if (!data_left) { + init_completion(&have_data); + register_buffer(); + } + return sizeof(*data); +} + +static struct hwrng virtio_hwrng = { + .name = "virtio", + .data_present = virtio_data_present, + .data_read = virtio_data_read, +}; + +static int virtrng_probe(struct virtio_device *vdev) +{ + int err; + + /* We expect a single virtqueue. */ + vq = vdev->config->find_vq(vdev, 0, random_recv_done); + if (IS_ERR(vq)) + return PTR_ERR(vq); + + err = hwrng_register(&virtio_hwrng); + if (err) { + vdev->config->del_vq(vq); + return err; + } + + register_buffer(); + return 0; +} + +static void virtrng_remove(struct virtio_device *vdev) +{ + vdev->config->reset(vdev); + hwrng_unregister(&virtio_hwrng); + vdev->config->del_vq(vq); +} + +static struct virtio_device_id id_table[] = { + { VIRTIO_ID_RNG, VIRTIO_DEV_ANY_ID }, + { 0 }, +}; + +static struct virtio_driver virtio_rng = { + .driver.name = KBUILD_MODNAME, + .driver.owner = THIS_MODULE, + .id_table = id_table, + .probe = virtrng_probe, + .remove = __devexit_p(virtrng_remove), +}; + +static int __init init(void) +{ + int err; + + random_data = kmalloc(RANDOM_DATA_SIZE, GFP_KERNEL); + if (!random_data) + return -ENOMEM; + + err = register_virtio_driver(&virtio_rng); + if (err) + kfree(random_data); + return err; +} + +static void __exit fini(void) +{ + kfree(random_data); + unregister_virtio_driver(&virtio_rng); +} +module_init(init); +module_exit(fini); + +MODULE_DEVICE_TABLE(virtio, id_table); +MODULE_DESCRIPTION("Virtio random number driver"); +MODULE_LICENSE("GPL"); diff --git a/include/linux/virtio_rng.h b/include/linux/virtio_rng.h new file mode 100644 index 0000000..331afb6 --- /dev/null +++ b/include/linux/virtio_rng.h @@ -0,0 +1,8 @@ +#ifndef _LINUX_VIRTIO_RNG_H +#define _LINUX_VIRTIO_RNG_H +#include + +/* The ID for virtio_rng */ +#define VIRTIO_ID_RNG 4 + +#endif /* _LINUX_VIRTIO_RNG_H */ -- cgit v0.10.2 From 52a3a05f3ab82655ffa4c9bf6835565c98a3c2e5 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Mon, 26 May 2008 11:29:27 +0200 Subject: virtio_net: another race with virtio_net and enable_cb Hello Rusty, seems that we still have a problem with virtio_net and the enable_cb callback. During a long running network stress tests with virtio and got the following oops: ------------[ cut here ]------------ kernel BUG at drivers/virtio/virtio_ring.c:230! illegal operation: 0001 [#1] SMP Modules linked in: CPU: 0 Not tainted 2.6.26-rc2-kvm-00436-gc94c08b-dirty #34 Process netserver (pid: 2582, task: 000000000fbc4c68, ksp: 000000000f42b990) Krnl PSW : 0704c00180000000 00000000002d0ec8 (vring_enable_cb+0x1c/0x60) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 000000000ef3d000 0000000010009800 0000000000000000 0000000000419ce0 0000000000000080 000000000000007b 000000000adb5538 000000000ef40900 000000000ef40000 000000000ef40920 0000000000000000 0000000000000005 000000000029c1b0 000000000fea7d18 Krnl Code: 00000000002d0ebc: a7110001 tmll %r1,1 00000000002d0ec0: a7740004 brc 7,2d0ec8 00000000002d0ec4: a7f40001 brc 15,2d0ec6 >00000000002d0ec8: a517fffe nill %r1,65534 00000000002d0ecc: 40103000 sth %r1,0(%r3) 00000000002d0ed0: 07f0 bcr 15,%r0 00000000002d0ed2: e31020380004 lg %r1,56(%r2) 00000000002d0ed8: a7480000 lhi %r4,0 Call Trace: ([<000000000029c0fc>] virtnet_poll+0x290/0x3b8) [<0000000000333fb8>] net_rx_action+0x9c/0x1b8 [<00000000001394bc>] __do_softirq+0x74/0x108 [<000000000010d16a>] do_softirq+0x92/0xac [<0000000000139826>] irq_exit+0x72/0xc8 [<000000000010a7b6>] do_extint+0xe2/0x104 [<0000000000110508>] ext_no_vtime+0x16/0x1a Last Breaking-Event-Address: [<00000000002d0ec4>] vring_enable_cb+0x18/0x60 I looked into the virtio_net code for some time and I think the following scenario happened. Please look at virtnet_poll: [...] /* Out of packets? */ if (received < budget) { netif_rx_complete(vi->dev, napi); if (unlikely(!vi->rvq->vq_ops->enable_cb(vi->rvq)) && napi_schedule_prep(napi)) { vi->rvq->vq_ops->disable_cb(vi->rvq); __netif_rx_schedule(vi->dev, napi); goto again; } } If an interrupt arrives after netif_rx_complete, a second poll routine can run on a different cpu. The second check for napi_schedule_prep would prevent any harm in the network stack, but we have called enable_cb possibly after the disable_cb in skb_recv_done. static void skb_recv_done(struct virtqueue *rvq) { struct virtnet_info *vi = rvq->vdev->priv; /* Schedule NAPI, Suppress further interrupts if successful. */ if (netif_rx_schedule_prep(vi->dev, &vi->napi)) { rvq->vq_ops->disable_cb(rvq); __netif_rx_schedule(vi->dev, &vi->napi); } } That means that the second poll routine runs with interrupts enabled, which is ok, since we can handle additional interrupts. The problem is now that the second poll routine might also call enable_cb, triggering the BUG. The only solution I can come up with, is to remove the BUG statement in enable_cb - similar to disable_cb. Opinions or better ideas where the oops could come from? Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 937a49d..96d2567 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -227,7 +227,6 @@ static bool vring_enable_cb(struct virtqueue *_vq) struct vring_virtqueue *vq = to_vvq(_vq); START_USE(vq); - BUG_ON(!(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)); /* We optimistically turn back on interrupts, then check if there was * more to do. */ -- cgit v0.10.2 From 7f31fe05000af54e1af81f65a96cab90db8d7ed8 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 29 May 2008 11:08:01 +0200 Subject: virtio_config: fix len calculation of config elements Rusty, This patch is a prereq for the virtio_blk blocksize patch, please apply it first. Adding an u32 value to the virtio_blk_config unconvered a small bug the config space defintions: v is a pointer, to we have to use sizeof(*v) instead of sizeof(v). Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 50db245..71d6c102 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -99,7 +99,7 @@ static inline bool virtio_has_feature(const struct virtio_device *vdev, * The return value is -ENOENT if the feature doesn't exist. Otherwise * the config value is copied into whatever is pointed to by v. */ #define virtio_config_val(vdev, fbit, offset, v) \ - virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(v)) + virtio_config_buf((vdev), (fbit), (offset), (v), sizeof(*v)) static inline int virtio_config_buf(struct virtio_device *vdev, unsigned int fbit, -- cgit v0.10.2 From 7757f09c70af87887dfc195e6d6ddd54f5cc7c39 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Thu, 29 May 2008 11:10:01 +0200 Subject: virtio_blk: fix endianess annotations Since commit 72e61eb40b55dd57031ec5971e810649f82b0259 (virtio: change config to guest endian) config space is no longer fixed endian. Lets change the virtio_blk_config variables. Signed-off-by: Christian Borntraeger Signed-off-by: Rusty Russell diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h index b80919f..5f79a5f 100644 --- a/include/linux/virtio_blk.h +++ b/include/linux/virtio_blk.h @@ -15,14 +15,14 @@ struct virtio_blk_config { /* The capacity (in 512-byte sectors). */ - __le64 capacity; + __u64 capacity; /* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */ - __le32 size_max; + __u32 size_max; /* The maximum number of segments (if VIRTIO_BLK_F_SEG_MAX) */ - __le32 seg_max; + __u32 seg_max; /* geometry the device (if VIRTIO_BLK_F_GEOMETRY) */ struct virtio_blk_geometry { - __le16 cylinders; + __u16 cylinders; __u8 heads; __u8 sectors; } geometry; -- cgit v0.10.2 From b4f68be6c5d507afdcd74f5be3df0b1209cda503 Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:45 -0500 Subject: virtio: force callback on empty. virtio allows drivers to suppress callbacks (ie. interrupts) for efficiency (no locking, it's just an optimization). There's a similar mechanism for the host to suppress notifications coming from the guest: in that case, we ignore the suppression if the ring is completely full. It turns out that life is simpler if the host similarly ignores callback suppression when the ring is completely empty: the network driver wants to free up old packets in a timely manner, and otherwise has to use a timer to poll. We have to remove the code which ignores interrupts when the driver has disabled them (again, it had no locking and hence was unreliable anyway). Signed-off-by: Rusty Russell diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 96d2567..72bf8bc 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -253,13 +253,6 @@ irqreturn_t vring_interrupt(int irq, void *_vq) if (unlikely(vq->broken)) return IRQ_HANDLED; - /* Other side may have missed us turning off the interrupt, - * but we should preserve disable semantic for virtio users. */ - if (unlikely(vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT)) { - pr_debug("virtqueue interrupt after disable for %p\n", vq); - return IRQ_HANDLED; - } - pr_debug("virtqueue callback for %p (%p)\n", vq, vq->vq.callback); if (vq->vq.callback) vq->vq.callback(&vq->vq); diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index 71d6c102..f364bbf 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -15,6 +15,10 @@ /* We've given up on this device. */ #define VIRTIO_CONFIG_S_FAILED 0x80 +/* Do we get callbacks when the ring is completely used, even if we've + * suppressed them? */ +#define VIRTIO_F_NOTIFY_ON_EMPTY 24 + #ifdef __KERNEL__ #include -- cgit v0.10.2 From 20887611523e749d99cc7d64ff6c97d27529fbae Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Fri, 30 May 2008 15:09:46 -0500 Subject: lguest: notify on empty This is the lguest implementation of the VIRTIO_F_NOTIFY_ON_EMPTY feature. It is currently only published for network devices, but it is turned on for everyone. Signed-off-by: Rusty Russell diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c index 3be8ab2..82fafe0 100644 --- a/Documentation/lguest/lguest.c +++ b/Documentation/lguest/lguest.c @@ -157,6 +157,9 @@ struct virtqueue /* The routine to call when the Guest pings us. */ void (*handle_output)(int fd, struct virtqueue *me); + + /* Outstanding buffers */ + unsigned int inflight; }; /* Remember the arguments to the program so we can "reboot" */ @@ -702,6 +705,7 @@ static unsigned get_vq_desc(struct virtqueue *vq, errx(1, "Looped descriptor"); } while ((i = next_desc(vq, i)) != vq->vring.num); + vq->inflight++; return head; } @@ -719,6 +723,7 @@ static void add_used(struct virtqueue *vq, unsigned int head, int len) /* Make sure buffer is written before we update index. */ wmb(); vq->vring.used->idx++; + vq->inflight--; } /* This actually sends the interrupt for this virtqueue */ @@ -726,8 +731,9 @@ static void trigger_irq(int fd, struct virtqueue *vq) { unsigned long buf[] = { LHREQ_IRQ, vq->config.irq }; - /* If they don't want an interrupt, don't send one. */ - if (vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) + /* If they don't want an interrupt, don't send one, unless empty. */ + if ((vq->vring.avail->flags & VRING_AVAIL_F_NO_INTERRUPT) + && vq->inflight) return; /* Send the Guest an interrupt tell them we used something up. */ @@ -1107,6 +1113,7 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs, vq->next = NULL; vq->last_avail_idx = 0; vq->dev = dev; + vq->inflight = 0; /* Initialize the configuration. */ vq->config.num = num_descs; @@ -1368,6 +1375,7 @@ static void setup_tun_net(const char *arg) /* Tell Guest what MAC address to use. */ add_feature(dev, VIRTIO_NET_F_MAC); + add_feature(dev, VIRTIO_F_NOTIFY_ON_EMPTY); set_config(dev, sizeof(conf), &conf); /* We don't need the socket any more; setup is done. */ -- cgit v0.10.2 From 97195d6b411fec8e33aa55b6a7c3dde7984d65ca Mon Sep 17 00:00:00 2001 From: Hans-Joachim Picht Date: Fri, 30 May 2008 10:03:24 +0200 Subject: [S390] fix sparsemem related compile error with allnoconfig on s390 On s390 make allnoconfig fails with the following build error: arch/s390/mm/init.c: In function 'show_mem': arch/s390/mm/init.c:55: error: implicit declaration of function 'pfn_valid' make[1]: *** [arch/s390/mm/init.o] Error 1 make: *** [arch/s390/mm] Error 2 This problem can by fixed ensuring that ARCH_SELECT_MEMORY_MODEL is always turned on. Signed-off-by: Hans-Joachim Picht Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 1d03508..93acb3c 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -308,6 +308,9 @@ config ARCH_SPARSEMEM_ENABLE config ARCH_SPARSEMEM_DEFAULT def_bool y +config ARCH_SELECT_MEMORY_MODEL + def_bool y + source "mm/Kconfig" comment "I/O subsystem configuration" -- cgit v0.10.2 From f71ad62a264a89cb1952df0c92b167005de8d1b0 Mon Sep 17 00:00:00 2001 From: Michael Holzheu Date: Fri, 30 May 2008 10:03:25 +0200 Subject: [S390] tape: Fix race condition in tape block device driver Due to incorrect function call sequence it can happen that a tape block request is finished before the request is taken from the block request queue. The following sequence leads to that condition: * tapeblock_start_request() -> start CCW program * Request finishes -> IO interrupt * tapeblock_end_request() * end_that_request_last() If blkdev_dequeue_request() has not been called before end_that_request_last(), a kernel bug is triggered in end_that_request_last() because the request is still queued. To solve that problem blkdev_dequeue_request() has to be called before starting the CCW program. Signed-off-by: Michael Holzheu Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/tape_block.c b/drivers/s390/char/tape_block.c index ddc4a11..95da72b 100644 --- a/drivers/s390/char/tape_block.c +++ b/drivers/s390/char/tape_block.c @@ -179,11 +179,11 @@ tapeblock_requeue(struct work_struct *work) { tapeblock_end_request(req, -EIO); continue; } + blkdev_dequeue_request(req); + nr_queued++; spin_unlock_irq(&device->blk_data.request_queue_lock); rc = tapeblock_start_request(device, req); spin_lock_irq(&device->blk_data.request_queue_lock); - blkdev_dequeue_request(req); - nr_queued++; } spin_unlock_irq(&device->blk_data.request_queue_lock); atomic_set(&device->blk_data.requeue_scheduled, 0); -- cgit v0.10.2 From bebd9a455b2593ba6543b961bc82c43350c2d8d9 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Fri, 30 May 2008 10:03:26 +0200 Subject: [S390] s390 types: make dma_addr_t 64 bit capable virtio tests with guests larger than 4 GB revealed that the dma_addr_t definition for s390 did not make it into the 64bit world. This patch changes the definition on s390 to have an u64 on 64bit and u32 on 32bit systems. Signed-off-by: Christian Borntraeger Signed-off-by: Martin Schwidefsky diff --git a/include/asm-s390/types.h b/include/asm-s390/types.h index 0e959e2..41c5476 100644 --- a/include/asm-s390/types.h +++ b/include/asm-s390/types.h @@ -40,7 +40,13 @@ typedef __signed__ long saddr_t; #ifndef __ASSEMBLY__ +typedef u64 dma64_addr_t; +#ifdef __s390x__ +/* DMA addresses come in 32-bit and 64-bit flavours. */ +typedef u64 dma_addr_t; +#else typedef u32 dma_addr_t; +#endif #ifndef __s390x__ typedef union { -- cgit v0.10.2 From 67060d9c1f5d91c917cc51bed464cb5638eaddbc Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 30 May 2008 10:03:27 +0200 Subject: [S390] Fix section mismatch warnings. This fixes the last remaining section mismatch warnings in s390 architecture code. It reveals also a real bug introduced by... me with git commit 2069e978d5a6e7b45d58027e3de7f879b8c5e488 ("[S390] sparsemem vmemmap: initialize memmap.") Calling the generic vmemmap_alloc_block() function to get initialized memory is a nice idea, however that function is __meminit annotated and therefore the function might be gone if we try to call it later. This can happen if a DCSS segment gets added. So basically revert the patch and clear the memmap explicitly to fix the original bug. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 1f42289..42b1d12 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -1089,7 +1089,7 @@ out: #ifdef CONFIG_HOTPLUG_CPU -int smp_rescan_cpus(void) +int __ref smp_rescan_cpus(void) { cpumask_t newcpus; int cpu; diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index ea28048..f591188 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -27,12 +27,19 @@ struct memory_segment { static LIST_HEAD(mem_segs); -static pud_t *vmem_pud_alloc(void) +static void __ref *vmem_alloc_pages(unsigned int order) +{ + if (slab_is_available()) + return (void *)__get_free_pages(GFP_KERNEL, order); + return alloc_bootmem_pages((1 << order) * PAGE_SIZE); +} + +static inline pud_t *vmem_pud_alloc(void) { pud_t *pud = NULL; #ifdef CONFIG_64BIT - pud = vmemmap_alloc_block(PAGE_SIZE * 4, 0); + pud = vmem_alloc_pages(2); if (!pud) return NULL; clear_table((unsigned long *) pud, _REGION3_ENTRY_EMPTY, PAGE_SIZE * 4); @@ -40,12 +47,12 @@ static pud_t *vmem_pud_alloc(void) return pud; } -static pmd_t *vmem_pmd_alloc(void) +static inline pmd_t *vmem_pmd_alloc(void) { pmd_t *pmd = NULL; #ifdef CONFIG_64BIT - pmd = vmemmap_alloc_block(PAGE_SIZE * 4, 0); + pmd = vmem_alloc_pages(2); if (!pmd) return NULL; clear_table((unsigned long *) pmd, _SEGMENT_ENTRY_EMPTY, PAGE_SIZE * 4); @@ -207,13 +214,14 @@ int __meminit vmemmap_populate(struct page *start, unsigned long nr, int node) if (pte_none(*pt_dir)) { unsigned long new_page; - new_page =__pa(vmemmap_alloc_block(PAGE_SIZE, 0)); + new_page =__pa(vmem_alloc_pages(0)); if (!new_page) goto out; pte = pfn_pte(new_page >> PAGE_SHIFT, PAGE_KERNEL); *pt_dir = pte; } } + memset(start, 0, nr * sizeof(struct page)); ret = 0; out: flush_tlb_kernel_range(start_addr, end_addr); diff --git a/drivers/s390/char/sclp_config.c b/drivers/s390/char/sclp_config.c index 9e784d5..ad05a87 100644 --- a/drivers/s390/char/sclp_config.c +++ b/drivers/s390/char/sclp_config.c @@ -40,7 +40,7 @@ static void sclp_cpu_capability_notify(struct work_struct *work) put_online_cpus(); } -static void sclp_cpu_change_notify(struct work_struct *work) +static void __ref sclp_cpu_change_notify(struct work_struct *work) { smp_rescan_cpus(); } -- cgit v0.10.2 From 1760537b69123905bf4f4b56f5746ae4547e9694 Mon Sep 17 00:00:00 2001 From: Gerald Schaefer Date: Fri, 30 May 2008 10:03:28 +0200 Subject: [S390] appldata: prevent cpu hotplug when walking cpu_online_map. Use get_online_cpus() to prevent cpu hotplug in situations where for_each_online_cpu() is called. Signed-off-by: Gerald Schaefer Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/appldata/appldata_base.c b/arch/s390/appldata/appldata_base.c index 655d525..ad40729 100644 --- a/arch/s390/appldata/appldata_base.c +++ b/arch/s390/appldata/appldata_base.c @@ -130,6 +130,7 @@ static void appldata_work_fn(struct work_struct *work) P_DEBUG(" -= Work Queue =-\n"); i = 0; + get_online_cpus(); spin_lock(&appldata_ops_lock); list_for_each(lh, &appldata_ops_list) { ops = list_entry(lh, struct appldata_ops, list); @@ -140,6 +141,7 @@ static void appldata_work_fn(struct work_struct *work) } } spin_unlock(&appldata_ops_lock); + put_online_cpus(); } /* @@ -266,12 +268,14 @@ appldata_timer_handler(ctl_table *ctl, int write, struct file *filp, len = *lenp; if (copy_from_user(buf, buffer, len > sizeof(buf) ? sizeof(buf) : len)) return -EFAULT; + get_online_cpus(); spin_lock(&appldata_timer_lock); if (buf[0] == '1') __appldata_vtimer_setup(APPLDATA_ADD_TIMER); else if (buf[0] == '0') __appldata_vtimer_setup(APPLDATA_DEL_TIMER); spin_unlock(&appldata_timer_lock); + put_online_cpus(); out: *lenp = len; *ppos += len; @@ -314,10 +318,12 @@ appldata_interval_handler(ctl_table *ctl, int write, struct file *filp, return -EINVAL; } + get_online_cpus(); spin_lock(&appldata_timer_lock); appldata_interval = interval; __appldata_vtimer_setup(APPLDATA_MOD_TIMER); spin_unlock(&appldata_timer_lock); + put_online_cpus(); P_INFO("Monitoring CPU interval set to %u milliseconds.\n", interval); @@ -556,8 +562,10 @@ static int __init appldata_init(void) return -ENOMEM; } + get_online_cpus(); for_each_online_cpu(i) appldata_online_cpu(i); + put_online_cpus(); /* Register cpu hotplug notifier */ register_hotcpu_notifier(&appldata_nb); -- cgit v0.10.2 From c1bb7f31eaef6ed6b9f895b99d9ea12e6b853606 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 30 May 2008 10:03:29 +0200 Subject: [S390] showmem: Only walk spanned pages. Convert show_mem() so its nearly the same as on x86/powerpc. Gives us proper locking and we get also rid of the only use of max_mapnr. Also the number of pages was contained in an int which might not be sufficient not too far in the future. Cc: Johannes Weiner Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c index 29f3a63..0559864 100644 --- a/arch/s390/mm/init.c +++ b/arch/s390/mm/init.c @@ -44,37 +44,34 @@ char empty_zero_page[PAGE_SIZE] __attribute__((__aligned__(PAGE_SIZE))); void show_mem(void) { - int i, total = 0, reserved = 0; - int shared = 0, cached = 0; + unsigned long i, total = 0, reserved = 0; + unsigned long shared = 0, cached = 0; + unsigned long flags; struct page *page; + pg_data_t *pgdat; printk("Mem-info:\n"); show_free_areas(); - i = max_mapnr; - while (i-- > 0) { - if (!pfn_valid(i)) - continue; - page = pfn_to_page(i); - total++; - if (PageReserved(page)) - reserved++; - else if (PageSwapCache(page)) - cached++; - else if (page_count(page)) - shared += page_count(page) - 1; + for_each_online_pgdat(pgdat) { + pgdat_resize_lock(pgdat, &flags); + for (i = 0; i < pgdat->node_spanned_pages; i++) { + if (!pfn_valid(pgdat->node_start_pfn + i)) + continue; + page = pfn_to_page(pgdat->node_start_pfn + i); + total++; + if (PageReserved(page)) + reserved++; + else if (PageSwapCache(page)) + cached++; + else if (page_count(page)) + shared += page_count(page) - 1; + } + pgdat_resize_unlock(pgdat, &flags); } - printk("%d pages of RAM\n", total); - printk("%d reserved pages\n", reserved); - printk("%d pages shared\n", shared); - printk("%d pages swap cached\n", cached); - - printk("%lu pages dirty\n", global_page_state(NR_FILE_DIRTY)); - printk("%lu pages writeback\n", global_page_state(NR_WRITEBACK)); - printk("%lu pages mapped\n", global_page_state(NR_FILE_MAPPED)); - printk("%lu pages slab\n", - global_page_state(NR_SLAB_RECLAIMABLE) + - global_page_state(NR_SLAB_UNRECLAIMABLE)); - printk("%lu pages pagetables\n", global_page_state(NR_PAGETABLE)); + printk("%ld pages of RAM\n", total); + printk("%ld reserved pages\n", reserved); + printk("%ld pages shared\n", shared); + printk("%ld pages swap cached\n", cached); } /* -- cgit v0.10.2 From d4820e44b0ae6830b1d634e6d0a425d839388c06 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Fri, 30 May 2008 10:03:30 +0200 Subject: [S390] sclp_vt220: fix scheduling while atomic bug. The driver incorrectly assumed that putchar will only be called from schedulable process context and therefore blocked and waited if no free output buffers where available. Since putchar may also be called from BH context this may lead to deadlocks. To fix this just return the number of characters accepted and let the upper layer handle the rest. The console write function will busy wait (sclp_sync_wait) until a buffer is available again. Cc: Peter Oberparleiter Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 35707c0..62576af 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -71,9 +71,6 @@ static struct list_head sclp_vt220_outqueue; /* Number of requests in outqueue */ static int sclp_vt220_outqueue_count; -/* Wait queue used to delay write requests while we've run out of buffers */ -static wait_queue_head_t sclp_vt220_waitq; - /* Timer used for delaying write requests to merge subsequent messages into * a single buffer */ static struct timer_list sclp_vt220_timer; @@ -133,7 +130,6 @@ sclp_vt220_process_queue(struct sclp_vt220_request *request) } while (request && __sclp_vt220_emit(request)); if (request == NULL && sclp_vt220_flush_later) sclp_vt220_emit_current(); - wake_up(&sclp_vt220_waitq); /* Check if the tty needs a wake up call */ if (sclp_vt220_tty != NULL) { tty_wakeup(sclp_vt220_tty); @@ -383,7 +379,7 @@ sclp_vt220_timeout(unsigned long data) */ static int __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule, - int convertlf, int may_schedule) + int convertlf, int may_fail) { unsigned long flags; void *page; @@ -395,15 +391,14 @@ __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule, overall_written = 0; spin_lock_irqsave(&sclp_vt220_lock, flags); do { - /* Create a sclp output buffer if none exists yet */ + /* Create an sclp output buffer if none exists yet */ if (sclp_vt220_current_request == NULL) { while (list_empty(&sclp_vt220_empty)) { spin_unlock_irqrestore(&sclp_vt220_lock, flags); - if (in_interrupt() || !may_schedule) - sclp_sync_wait(); + if (may_fail) + goto out; else - wait_event(sclp_vt220_waitq, - !list_empty(&sclp_vt220_empty)); + sclp_sync_wait(); spin_lock_irqsave(&sclp_vt220_lock, flags); } page = (void *) sclp_vt220_empty.next; @@ -437,6 +432,7 @@ __sclp_vt220_write(const unsigned char *buf, int count, int do_schedule, add_timer(&sclp_vt220_timer); } spin_unlock_irqrestore(&sclp_vt220_lock, flags); +out: return overall_written; } @@ -520,19 +516,11 @@ sclp_vt220_close(struct tty_struct *tty, struct file *filp) * character to the tty device. If the kernel uses this routine, * it must call the flush_chars() routine (if defined) when it is * done stuffing characters into the driver. - * - * NOTE: include/linux/tty_driver.h specifies that a character should be - * ignored if there is no room in the queue. This driver implements a different - * semantic in that it will block when there is no more room left. - * - * FIXME: putchar can currently be called from BH and other non blocking - * handlers so this semantic isn't a good idea. */ static int sclp_vt220_put_char(struct tty_struct *tty, unsigned char ch) { - __sclp_vt220_write(&ch, 1, 0, 0, 1); - return 1; + return __sclp_vt220_write(&ch, 1, 0, 0, 1); } /* @@ -653,7 +641,6 @@ static int __init __sclp_vt220_init(void) spin_lock_init(&sclp_vt220_lock); INIT_LIST_HEAD(&sclp_vt220_empty); INIT_LIST_HEAD(&sclp_vt220_outqueue); - init_waitqueue_head(&sclp_vt220_waitq); init_timer(&sclp_vt220_timer); sclp_vt220_current_request = NULL; sclp_vt220_buffered_chars = 0; -- cgit v0.10.2 From c80ee724966a8ce9a68020d9095233fb1c6f57e8 Mon Sep 17 00:00:00 2001 From: Stefan Haberland Date: Fri, 30 May 2008 10:03:31 +0200 Subject: [S390] dasd: use a generic wait_queue for sleep_on Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_ functions from being referenced by callback_data while it does not exist any more. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c index 8ba3f13..1a40256 100644 --- a/drivers/s390/block/dasd.c +++ b/drivers/s390/block/dasd.c @@ -63,6 +63,7 @@ static void dasd_return_cqr_cb(struct dasd_ccw_req *, void *); */ static wait_queue_head_t dasd_init_waitq; static wait_queue_head_t dasd_flush_wq; +static wait_queue_head_t generic_waitq; /* * Allocate memory for a new device structure. @@ -1151,11 +1152,15 @@ static void __dasd_device_process_final_queue(struct dasd_device *device, struct list_head *l, *n; struct dasd_ccw_req *cqr; struct dasd_block *block; + void (*callback)(struct dasd_ccw_req *, void *data); + void *callback_data; list_for_each_safe(l, n, final_queue) { cqr = list_entry(l, struct dasd_ccw_req, devlist); list_del_init(&cqr->devlist); block = cqr->block; + callback = cqr->callback; + callback_data = cqr->callback_data; if (block) spin_lock_bh(&block->queue_lock); switch (cqr->status) { @@ -1176,7 +1181,7 @@ static void __dasd_device_process_final_queue(struct dasd_device *device, BUG(); } if (cqr->callback != NULL) - (cqr->callback)(cqr, cqr->callback_data); + (callback)(cqr, callback_data); if (block) spin_unlock_bh(&block->queue_lock); } @@ -1406,17 +1411,15 @@ static inline int _wait_for_wakeup(struct dasd_ccw_req *cqr) */ int dasd_sleep_on(struct dasd_ccw_req *cqr) { - wait_queue_head_t wait_q; struct dasd_device *device; int rc; device = cqr->startdev; - init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; - cqr->callback_data = (void *) &wait_q; + cqr->callback_data = (void *) &generic_waitq; dasd_add_request_tail(cqr); - wait_event(wait_q, _wait_for_wakeup(cqr)); + wait_event(generic_waitq, _wait_for_wakeup(cqr)); /* Request status is either done or failed. */ rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; @@ -1429,20 +1432,18 @@ int dasd_sleep_on(struct dasd_ccw_req *cqr) */ int dasd_sleep_on_interruptible(struct dasd_ccw_req *cqr) { - wait_queue_head_t wait_q; struct dasd_device *device; int rc; device = cqr->startdev; - init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; - cqr->callback_data = (void *) &wait_q; + cqr->callback_data = (void *) &generic_waitq; dasd_add_request_tail(cqr); - rc = wait_event_interruptible(wait_q, _wait_for_wakeup(cqr)); + rc = wait_event_interruptible(generic_waitq, _wait_for_wakeup(cqr)); if (rc == -ERESTARTSYS) { dasd_cancel_req(cqr); /* wait (non-interruptible) for final status */ - wait_event(wait_q, _wait_for_wakeup(cqr)); + wait_event(generic_waitq, _wait_for_wakeup(cqr)); } rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; return rc; @@ -1466,7 +1467,6 @@ static inline int _dasd_term_running_cqr(struct dasd_device *device) int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) { - wait_queue_head_t wait_q; struct dasd_device *device; int rc; @@ -1478,9 +1478,8 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) return rc; } - init_waitqueue_head (&wait_q); cqr->callback = dasd_wakeup_cb; - cqr->callback_data = (void *) &wait_q; + cqr->callback_data = (void *) &generic_waitq; cqr->status = DASD_CQR_QUEUED; list_add(&cqr->devlist, &device->ccw_queue); @@ -1489,7 +1488,7 @@ int dasd_sleep_on_immediatly(struct dasd_ccw_req *cqr) spin_unlock_irq(get_ccwdev_lock(device->cdev)); - wait_event(wait_q, _wait_for_wakeup(cqr)); + wait_event(generic_waitq, _wait_for_wakeup(cqr)); /* Request status is either done or failed. */ rc = (cqr->status == DASD_CQR_DONE) ? 0 : -EIO; @@ -2430,6 +2429,7 @@ static int __init dasd_init(void) init_waitqueue_head(&dasd_init_waitq); init_waitqueue_head(&dasd_flush_wq); + init_waitqueue_head(&generic_waitq); /* register 'common' DASD debug area, used for all DBF_XXX calls */ dasd_debug_area = debug_register("dasd", 1, 1, 8 * sizeof(long)); -- cgit v0.10.2 From 54ad64129cc166b9eec7151f3f9fc83589e33555 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 30 May 2008 10:03:32 +0200 Subject: [S390] 3270: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Remove the stack local wait_queue_head_t from raw3270_start_init and use the global raw3270_wait_queue instead. Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/raw3270.c b/drivers/s390/char/raw3270.c index 0d98f1f..848ef7e 100644 --- a/drivers/s390/char/raw3270.c +++ b/drivers/s390/char/raw3270.c @@ -549,7 +549,6 @@ raw3270_start_init(struct raw3270 *rp, struct raw3270_view *view, struct raw3270_request *rq) { unsigned long flags; - wait_queue_head_t wq; int rc; #ifdef CONFIG_TN3270_CONSOLE @@ -566,20 +565,20 @@ raw3270_start_init(struct raw3270 *rp, struct raw3270_view *view, return rq->rc; } #endif - init_waitqueue_head(&wq); rq->callback = raw3270_wake_init; - rq->callback_data = &wq; + rq->callback_data = &raw3270_wait_queue; spin_lock_irqsave(get_ccwdev_lock(view->dev->cdev), flags); rc = __raw3270_start(rp, view, rq); spin_unlock_irqrestore(get_ccwdev_lock(view->dev->cdev), flags); if (rc) return rc; /* Now wait for the completion. */ - rc = wait_event_interruptible(wq, raw3270_request_final(rq)); + rc = wait_event_interruptible(raw3270_wait_queue, + raw3270_request_final(rq)); if (rc == -ERESTARTSYS) { /* Interrupted by a signal. */ raw3270_halt_io(view->dev, rq); /* No wait for the halt to complete. */ - wait_event(wq, raw3270_request_final(rq)); + wait_event(raw3270_wait_queue, raw3270_request_final(rq)); return -ERESTARTSYS; } return rq->rc; -- cgit v0.10.2 From 4657fb8a98a4e02981a574492bbe470c147b6657 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 30 May 2008 10:03:33 +0200 Subject: [S390] tape: fix race with stack local wait_queue_head_t. A wait_event call with a stack local wait_queue_head_t structure that is used to do the wake up for the wait_event is inherently racy. After the wait_event finished the wake_up call might not have completed yet. Replace the stack local wait_queue_head_t in tape_do_io and tape_do_io_interruptible with a per device wait queue. Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/tape.h b/drivers/s390/char/tape.h index dddf8d6..d0d565a 100644 --- a/drivers/s390/char/tape.h +++ b/drivers/s390/char/tape.h @@ -231,6 +231,9 @@ struct tape_device { /* Request queue. */ struct list_head req_queue; + /* Request wait queue. */ + wait_queue_head_t wait_queue; + /* Each tape device has (currently) two minor numbers. */ int first_minor; diff --git a/drivers/s390/char/tape_core.c b/drivers/s390/char/tape_core.c index 76e44eb..c20e3c5 100644 --- a/drivers/s390/char/tape_core.c +++ b/drivers/s390/char/tape_core.c @@ -449,6 +449,7 @@ tape_alloc_device(void) INIT_LIST_HEAD(&device->req_queue); INIT_LIST_HEAD(&device->node); init_waitqueue_head(&device->state_change_wq); + init_waitqueue_head(&device->wait_queue); device->tape_state = TS_INIT; device->medium_state = MS_UNKNOWN; *device->modeset_byte = 0; @@ -954,21 +955,19 @@ __tape_wake_up(struct tape_request *request, void *data) int tape_do_io(struct tape_device *device, struct tape_request *request) { - wait_queue_head_t wq; int rc; - init_waitqueue_head(&wq); spin_lock_irq(get_ccwdev_lock(device->cdev)); /* Setup callback */ request->callback = __tape_wake_up; - request->callback_data = &wq; + request->callback_data = &device->wait_queue; /* Add request to request queue and try to start it. */ rc = __tape_start_request(device, request); spin_unlock_irq(get_ccwdev_lock(device->cdev)); if (rc) return rc; /* Request added to the queue. Wait for its completion. */ - wait_event(wq, (request->callback == NULL)); + wait_event(device->wait_queue, (request->callback == NULL)); /* Get rc from request */ return request->rc; } @@ -989,20 +988,19 @@ int tape_do_io_interruptible(struct tape_device *device, struct tape_request *request) { - wait_queue_head_t wq; int rc; - init_waitqueue_head(&wq); spin_lock_irq(get_ccwdev_lock(device->cdev)); /* Setup callback */ request->callback = __tape_wake_up_interruptible; - request->callback_data = &wq; + request->callback_data = &device->wait_queue; rc = __tape_start_request(device, request); spin_unlock_irq(get_ccwdev_lock(device->cdev)); if (rc) return rc; /* Request added to the queue. Wait for its completion. */ - rc = wait_event_interruptible(wq, (request->callback == NULL)); + rc = wait_event_interruptible(device->wait_queue, + (request->callback == NULL)); if (rc != -ERESTARTSYS) /* Request finished normally. */ return request->rc; @@ -1015,7 +1013,7 @@ tape_do_io_interruptible(struct tape_device *device, /* Wait for the interrupt that acknowledges the halt. */ do { rc = wait_event_interruptible( - wq, + device->wait_queue, (request->callback == NULL) ); } while (rc == -ERESTARTSYS); -- cgit v0.10.2 From 209fb9090f4ca5874289c9ca82991393f85c1eff Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 30 May 2008 10:03:34 +0200 Subject: [S390] disassembler: fix idte instruction format. The correct instruction format of idte is "idte r1,r3,r2" with r1 at bit 24, r3 at bit 16 and r2 at bit 28. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/kernel/dis.c b/arch/s390/kernel/dis.c index c14a336..d2f270c 100644 --- a/arch/s390/kernel/dis.c +++ b/arch/s390/kernel/dis.c @@ -208,7 +208,7 @@ static const unsigned char formats[][7] = { [INSTR_RRF_F0FF] = { 0xff, F_16,F_24,F_28,0,0,0 }, /* e.g. madbr */ [INSTR_RRF_FUFF] = { 0xff, F_24,F_16,F_28,U4_20,0,0 },/* e.g. didbr */ [INSTR_RRF_RURR] = { 0xff, R_24,R_28,R_16,U4_20,0,0 },/* e.g. .insn */ - [INSTR_RRF_R0RR] = { 0xff, R_24,R_28,R_16,0,0,0 }, /* e.g. idte */ + [INSTR_RRF_R0RR] = { 0xff, R_24,R_16,R_28,0,0,0 }, /* e.g. idte */ [INSTR_RRF_U0FF] = { 0xff, F_24,U4_16,F_28,0,0,0 }, /* e.g. fixr */ [INSTR_RRF_U0RF] = { 0xff, R_24,U4_16,F_28,0,0,0 }, /* e.g. cfebr */ [INSTR_RRF_M0RR] = { 0xff, R_24,R_28,M_16,0,0,0 }, /* e.g. sske */ -- cgit v0.10.2 From 0066ed55a9a061ed64bbc09c16f45daf0b976ac5 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Fri, 30 May 2008 10:03:35 +0200 Subject: [S390] Update default configuration. Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/defconfig b/arch/s390/defconfig index aa341d0..c5cdb97 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25 -# Wed Apr 30 11:07:45 2008 +# Linux kernel version: 2.6.26-rc4 +# Fri May 30 09:49:33 2008 # CONFIG_SCHED_MC=y CONFIG_MMU=y @@ -103,6 +103,7 @@ CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y @@ -173,6 +174,7 @@ CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_SELECT_MEMORY_MODEL=y # CONFIG_FLATMEM_MANUAL is not set # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -210,6 +212,7 @@ CONFIG_FORCE_MAX_ZONEORDER=9 CONFIG_PFAULT=y # CONFIG_SHARED_KERNEL is not set # CONFIG_CMM is not set +# CONFIG_PAGE_STATES is not set CONFIG_VIRT_TIMER=y CONFIG_VIRT_CPU_ACCOUNTING=y # CONFIG_APPLDATA_BASE is not set @@ -620,6 +623,7 @@ CONFIG_S390_VMUR=m # # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +CONFIG_ACCESSIBILITY=y # # File systems @@ -754,11 +758,12 @@ CONFIG_FRAME_WARN=2048 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y -CONFIG_HEADERS_CHECK=y +# CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_RT_MUTEXES is not set -- cgit v0.10.2 From fbaa20f66a8283359523dfe961ebe66f0b8fac59 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 May 2008 02:01:28 -0700 Subject: sparc64: IO accessors fix From: Benjamin Herrenschmidt I added a full memory clobber on all asm accessors except the _raw ones. Signed-off-by: David S. Miller diff --git a/include/asm-sparc64/io.h b/include/asm-sparc64/io.h index c299b85..3158960 100644 --- a/include/asm-sparc64/io.h +++ b/include/asm-sparc64/io.h @@ -24,7 +24,8 @@ static inline u8 _inb(unsigned long addr) __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_inb */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -35,7 +36,8 @@ static inline u16 _inw(unsigned long addr) __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_inw */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -46,7 +48,8 @@ static inline u32 _inl(unsigned long addr) __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_inl */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -55,21 +58,24 @@ static inline void _outb(u8 b, unsigned long addr) { __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_outb */" : /* no outputs */ - : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _outw(u16 w, unsigned long addr) { __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_outw */" : /* no outputs */ - : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _outl(u32 l, unsigned long addr) { __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_outl */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } #define inb(__addr) (_inb((unsigned long)(__addr))) @@ -128,7 +134,8 @@ static inline u8 _readb(const volatile void __iomem *addr) __asm__ __volatile__("lduba\t[%1] %2, %0\t/* pci_readb */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -137,7 +144,8 @@ static inline u16 _readw(const volatile void __iomem *addr) __asm__ __volatile__("lduha\t[%1] %2, %0\t/* pci_readw */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -147,7 +155,8 @@ static inline u32 _readl(const volatile void __iomem *addr) __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* pci_readl */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -157,7 +166,8 @@ static inline u64 _readq(const volatile void __iomem *addr) __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* pci_readq */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); return ret; } @@ -166,28 +176,32 @@ static inline void _writeb(u8 b, volatile void __iomem *addr) { __asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */" : /* no outputs */ - : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _writew(u16 w, volatile void __iomem *addr) { __asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */" : /* no outputs */ - : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _writel(u32 l, volatile void __iomem *addr) { __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } static inline void _writeq(u64 q, volatile void __iomem *addr) { __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */" : /* no outputs */ - : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)); + : "Jr" (q), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L) + : "memory"); } #define readb(__addr) _readb(__addr) @@ -299,7 +313,8 @@ static inline u8 _sbus_readb(const volatile void __iomem *addr) __asm__ __volatile__("lduba\t[%1] %2, %0\t/* sbus_readb */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -310,7 +325,8 @@ static inline u16 _sbus_readw(const volatile void __iomem *addr) __asm__ __volatile__("lduha\t[%1] %2, %0\t/* sbus_readw */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -321,7 +337,8 @@ static inline u32 _sbus_readl(const volatile void __iomem *addr) __asm__ __volatile__("lduwa\t[%1] %2, %0\t/* sbus_readl */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -332,7 +349,8 @@ static inline u64 _sbus_readq(const volatile void __iomem *addr) __asm__ __volatile__("ldxa\t[%1] %2, %0\t/* sbus_readq */" : "=r" (ret) - : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); return ret; } @@ -341,28 +359,32 @@ static inline void _sbus_writeb(u8 b, volatile void __iomem *addr) { __asm__ __volatile__("stba\t%r0, [%1] %2\t/* sbus_writeb */" : /* no outputs */ - : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (b), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } static inline void _sbus_writew(u16 w, volatile void __iomem *addr) { __asm__ __volatile__("stha\t%r0, [%1] %2\t/* sbus_writew */" : /* no outputs */ - : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (w), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } static inline void _sbus_writel(u32 l, volatile void __iomem *addr) { __asm__ __volatile__("stwa\t%r0, [%1] %2\t/* sbus_writel */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } static inline void _sbus_writeq(u64 l, volatile void __iomem *addr) { __asm__ __volatile__("stxa\t%r0, [%1] %2\t/* sbus_writeq */" : /* no outputs */ - : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E)); + : "Jr" (l), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E) + : "memory"); } #define sbus_readb(__addr) _sbus_readb(__addr) -- cgit v0.10.2 From 3446b9d57edd0b96a89715fef222879e4919a115 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Fri, 30 May 2008 02:57:29 -0700 Subject: llc: Fix double accounting of received packets llc_sap_rcv was being preceded by skb_set_owner_r, then calling llc_state_process that calls sock_queue_rcv_skb, that in turn calls skb_set_owner_r again making the space allowed to be used by the socket to be leaked, making the socket to get stuck. Fix it by setting skb->sk at llc_sap_rcv and leave the accounting to be done only at sock_queue_rcv_skb. Reported-by: Dmitry Petukhov Tested-by: Dmitry Petukhov Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller diff --git a/net/llc/llc_sap.c b/net/llc/llc_sap.c index e2ddde7..008de1f 100644 --- a/net/llc/llc_sap.c +++ b/net/llc/llc_sap.c @@ -286,12 +286,14 @@ void llc_build_and_send_xid_pkt(struct llc_sap *sap, struct sk_buff *skb, * * Sends received pdus to the sap state machine. */ -static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb) +static void llc_sap_rcv(struct llc_sap *sap, struct sk_buff *skb, + struct sock *sk) { struct llc_sap_state_ev *ev = llc_sap_ev(skb); ev->type = LLC_SAP_EV_TYPE_PDU; ev->reason = 0; + skb->sk = sk; llc_sap_state_process(sap, skb); } @@ -360,8 +362,7 @@ static void llc_sap_mcast(struct llc_sap *sap, break; sock_hold(sk); - skb_set_owner_r(skb1, sk); - llc_sap_rcv(sap, skb1); + llc_sap_rcv(sap, skb1, sk); sock_put(sk); } read_unlock_bh(&sap->sk_list.lock); @@ -381,8 +382,7 @@ void llc_sap_handler(struct llc_sap *sap, struct sk_buff *skb) } else { struct sock *sk = llc_lookup_dgram(sap, &laddr); if (sk) { - skb_set_owner_r(skb, sk); - llc_sap_rcv(sap, skb); + llc_sap_rcv(sap, skb, sk); sock_put(sk); } else kfree_skb(skb); -- cgit v0.10.2 From e48d6d97bb6bd8c008045ea0522ea8278fdccc55 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Thu, 29 May 2008 08:16:56 +0200 Subject: [ALSA] ac97 - Fix ASUS A9T laptop output ASUS A9T laptop uses line-out pin as the real front-output while other devices use it as the surround. Signed-off-by: Takashi Iwai diff --git a/include/sound/ac97_codec.h b/include/sound/ac97_codec.h index 049edc5..9c309da 100644 --- a/include/sound/ac97_codec.h +++ b/include/sound/ac97_codec.h @@ -505,6 +505,7 @@ struct snd_ac97 { unsigned short pcmreg[3]; // PCM registers unsigned short codec_cfg[3]; // CODEC_CFG bits unsigned char swap_mic_linein; // AD1986/AD1986A only + unsigned char lo_as_master; /* LO as master */ } ad18xx; unsigned int dev_flags; /* device specific */ } spec; diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c index 2da8981..1292dce 100644 --- a/sound/pci/ac97/ac97_patch.c +++ b/sound/pci/ac97/ac97_patch.c @@ -1971,6 +1971,9 @@ static int snd_ac97_ad1888_lohpsel_get(struct snd_kcontrol *kcontrol, struct snd val = ac97->regs[AC97_AD_MISC]; ucontrol->value.integer.value[0] = !(val & AC97_AD198X_LOSEL); + if (ac97->spec.ad18xx.lo_as_master) + ucontrol->value.integer.value[0] = + !ucontrol->value.integer.value[0]; return 0; } @@ -1979,8 +1982,10 @@ static int snd_ac97_ad1888_lohpsel_put(struct snd_kcontrol *kcontrol, struct snd struct snd_ac97 *ac97 = snd_kcontrol_chip(kcontrol); unsigned short val; - val = !ucontrol->value.integer.value[0] - ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0; + val = !ucontrol->value.integer.value[0]; + if (ac97->spec.ad18xx.lo_as_master) + val = !val; + val = val ? (AC97_AD198X_LOSEL | AC97_AD198X_HPSEL) : 0; return snd_ac97_update_bits(ac97, AC97_AD_MISC, AC97_AD198X_LOSEL | AC97_AD198X_HPSEL, val); } @@ -2031,7 +2036,7 @@ static void ad1888_update_jacks(struct snd_ac97 *ac97) { unsigned short val = 0; /* clear LODIS if shared jack is to be used for Surround out */ - if (is_shared_linein(ac97)) + if (!ac97->spec.ad18xx.lo_as_master && is_shared_linein(ac97)) val |= (1 << 12); /* clear CLDIS if shared jack is to be used for C/LFE out */ if (is_shared_micin(ac97)) @@ -2067,9 +2072,13 @@ static const struct snd_kcontrol_new snd_ac97_ad1888_controls[] = { static int patch_ad1888_specific(struct snd_ac97 *ac97) { - /* rename 0x04 as "Master" and 0x02 as "Master Surround" */ - snd_ac97_rename_vol_ctl(ac97, "Master Playback", "Master Surround Playback"); - snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", "Master Playback"); + if (!ac97->spec.ad18xx.lo_as_master) { + /* rename 0x04 as "Master" and 0x02 as "Master Surround" */ + snd_ac97_rename_vol_ctl(ac97, "Master Playback", + "Master Surround Playback"); + snd_ac97_rename_vol_ctl(ac97, "Headphone Playback", + "Master Playback"); + } return patch_build_controls(ac97, snd_ac97_ad1888_controls, ARRAY_SIZE(snd_ac97_ad1888_controls)); } @@ -2088,16 +2097,27 @@ static int patch_ad1888(struct snd_ac97 * ac97) patch_ad1881(ac97); ac97->build_ops = &patch_ad1888_build_ops; - /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */ - /* it seems that most vendors connect line-out connector to headphone out of AC'97 */ + + /* + * LO can be used as a real line-out on some devices, + * and we need to revert the front/surround mixer switches + */ + if (ac97->subsystem_vendor == 0x1043 && + ac97->subsystem_device == 0x1193) /* ASUS A9T laptop */ + ac97->spec.ad18xx.lo_as_master = 1; + + misc = snd_ac97_read(ac97, AC97_AD_MISC); /* AD-compatible mode */ /* Stereo mutes enabled */ - misc = snd_ac97_read(ac97, AC97_AD_MISC); - snd_ac97_write_cache(ac97, AC97_AD_MISC, misc | - AC97_AD198X_LOSEL | - AC97_AD198X_HPSEL | - AC97_AD198X_MSPLT | - AC97_AD198X_AC97NC); + misc |= AC97_AD198X_MSPLT | AC97_AD198X_AC97NC; + if (!ac97->spec.ad18xx.lo_as_master) + /* Switch FRONT/SURROUND LINE-OUT/HP-OUT default connection */ + /* it seems that most vendors connect line-out connector to + * headphone out of AC'97 + */ + misc |= AC97_AD198X_LOSEL | AC97_AD198X_HPSEL; + + snd_ac97_write_cache(ac97, AC97_AD_MISC, misc); ac97->flags |= AC97_STEREO_MUTES; return 0; } -- cgit v0.10.2 From 269ef19caa16650bf3a68fd33a6cb800683419dd Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 15:32:15 +0200 Subject: [ALSA] hda - Fix mic input on HP2133 The mic pins are wrongly assigned on AD1884A mobile model. The mic handling is fixed for the automatic mic selection, too. Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index ff1b922..a99e86d 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -3644,33 +3644,17 @@ static struct snd_kcontrol_new ad1884a_laptop_mixers[] = { { } /* end */ }; -static struct hda_input_mux ad1884a_mobile_capture_source = { - .num_items = 2, - .items = { - { "Mic", 0x1 }, /* port-C */ - { "Mix", 0x3 }, - }, -}; - static struct snd_kcontrol_new ad1884a_mobile_mixers[] = { HDA_CODEC_VOLUME("Master Playback Volume", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Master Playback Switch", 0x21, 0x0, HDA_OUTPUT), HDA_CODEC_VOLUME("PCM Playback Volume", 0x20, 0x5, HDA_INPUT), HDA_CODEC_MUTE("PCM Playback Switch", 0x20, 0x5, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Playback Volume", 0x20, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("Mic Playback Switch", 0x20, 0x01, HDA_INPUT), HDA_CODEC_VOLUME("Beep Playback Volume", 0x20, 0x03, HDA_INPUT), HDA_CODEC_MUTE("Beep Playback Switch", 0x20, 0x03, HDA_INPUT), - HDA_CODEC_VOLUME("Mic Boost", 0x15, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Mic Capture Volume", 0x14, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Internal Mic Capture Volume", 0x15, 0x0, HDA_INPUT), HDA_CODEC_VOLUME("Capture Volume", 0x0c, 0x0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x0c, 0x0, HDA_OUTPUT), - { - .iface = SNDRV_CTL_ELEM_IFACE_MIXER, - .name = "Capture Source", - .info = ad198x_mux_enum_info, - .get = ad198x_mux_enum_get, - .put = ad198x_mux_enum_put, - }, { } /* end */ }; @@ -3687,14 +3671,31 @@ static void ad1884a_hp_automute(struct hda_codec *codec) present ? 0x00 : 0x02); } +/* switch to external mic if plugged */ +static void ad1884a_hp_automic(struct hda_codec *codec) +{ + unsigned int present; + + present = snd_hda_codec_read(codec, 0x14, 0, + AC_VERB_GET_PIN_SENSE, 0) & 0x80000000; + snd_hda_codec_write(codec, 0x0c, 0, AC_VERB_SET_CONNECT_SEL, + present ? 0 : 1); +} + #define AD1884A_HP_EVENT 0x37 +#define AD1884A_MIC_EVENT 0x36 /* unsolicited event for HP jack sensing */ static void ad1884a_hp_unsol_event(struct hda_codec *codec, unsigned int res) { - if ((res >> 26) != AD1884A_HP_EVENT) - return; - ad1884a_hp_automute(codec); + switch (res >> 26) { + case AD1884A_HP_EVENT: + ad1884a_hp_automute(codec); + break; + case AD1884A_MIC_EVENT: + ad1884a_hp_automic(codec); + break; + } } /* initialize jack-sensing, too */ @@ -3702,6 +3703,7 @@ static int ad1884a_hp_init(struct hda_codec *codec) { ad198x_init(codec); ad1884a_hp_automute(codec); + ad1884a_hp_automic(codec); return 0; } @@ -3715,10 +3717,15 @@ static struct hda_verb ad1884a_laptop_verbs[] = { /* Port-F pin */ {0x16, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE}, + /* Port-C pin - internal mic-in */ + {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80}, + {0x14, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */ + {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0x7002}, /* raise mic as default */ /* analog mix */ {0x20, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* unsolicited event for pin-sense */ {0x11, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_HP_EVENT}, + {0x14, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | AD1884A_MIC_EVENT}, { } /* end */ }; @@ -3878,7 +3885,6 @@ static int patch_ad1884a(struct hda_codec *codec) spec->mixers[0] = ad1884a_mobile_mixers; spec->init_verbs[spec->num_init_verbs++] = ad1884a_laptop_verbs; spec->multiout.dig_out_nid = 0; - spec->input_mux = &ad1884a_mobile_capture_source; codec->patch_ops.unsol_event = ad1884a_hp_unsol_event; codec->patch_ops.init = ad1884a_hp_init; break; -- cgit v0.10.2 From 501a5250589be41c4c060afa855bc60b4539a340 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Fri, 30 May 2008 10:40:28 -0400 Subject: Input: gtco - fix double kfree in error handling path The code would try to free 'report' twice upon input_register_device() failure. Reported-by: Julia Lawall Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/tablet/gtco.c b/drivers/input/tablet/gtco.c index c5a8661..1e748e4 100644 --- a/drivers/input/tablet/gtco.c +++ b/drivers/input/tablet/gtco.c @@ -830,7 +830,7 @@ static int gtco_probe(struct usb_interface *usbinterface, struct gtco *gtco; struct input_dev *input_dev; struct hid_descriptor *hid_desc; - char *report = NULL; + char *report; int result = 0, retry; int error; struct usb_endpoint_descriptor *endpoint; @@ -916,12 +916,16 @@ static int gtco_probe(struct usb_interface *usbinterface, le16_to_cpu(hid_desc->wDescriptorLength), 5000); /* 5 secs */ - if (result == le16_to_cpu(hid_desc->wDescriptorLength)) + dbg("usb_control_msg result: %d", result); + if (result == le16_to_cpu(hid_desc->wDescriptorLength)) { + parse_hid_report_descriptor(gtco, report, result); break; + } } + kfree(report); + /* If we didn't get the report, fail */ - dbg("usb_control_msg result: :%d", result); if (result != le16_to_cpu(hid_desc->wDescriptorLength)) { err("Failed to get HID Report Descriptor of size: %d", hid_desc->wDescriptorLength); @@ -929,12 +933,6 @@ static int gtco_probe(struct usb_interface *usbinterface, goto err_free_urb; } - /* Now we parse the report */ - parse_hid_report_descriptor(gtco, report, result); - - /* Now we delete it */ - kfree(report); - /* Create a device file node */ usb_make_path(gtco->usbdev, gtco->usbpath, sizeof(gtco->usbpath)); strlcat(gtco->usbpath, "/input0", sizeof(gtco->usbpath)); @@ -988,7 +986,6 @@ static int gtco_probe(struct usb_interface *usbinterface, usb_buffer_free(gtco->usbdev, REPORT_MAX_SIZE, gtco->buffer, gtco->buf_dma); err_free_devs: - kfree(report); input_free_device(input_dev); kfree(gtco); return error; -- cgit v0.10.2 From 5adad0133907790c50283bf03271d920d6897043 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Fri, 30 May 2008 10:40:46 -0400 Subject: Input: rename SW_RADIO to SW_RFKILL_ALL The SW_RADIO code for EV_SW events has a name that is not descriptive enough of its intended function, and could induce someone to think KEY_RADIO is its EV_KEY counterpart, which is false. Rename it to SW_RFKILL_ALL, and document what this event is for. Keep the old name around, to avoid userspace ABI breaks. The SW_RFKILL_ALL event is meant to be used by rfkill master switches. It is not bound to a particular radio switch type, and usually applies to all types. It is semantically tied to master rfkill switches that enable or disable every radio in a system. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Dmitry Torokhov diff --git a/include/linux/input.h b/include/linux/input.h index 28a094f..e075c4b 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -637,7 +637,9 @@ struct input_absinfo { #define SW_LID 0x00 /* set = lid shut */ #define SW_TABLET_MODE 0x01 /* set = tablet mode */ #define SW_HEADPHONE_INSERT 0x02 /* set = inserted */ -#define SW_RADIO 0x03 /* set = radio enabled */ +#define SW_RFKILL_ALL 0x03 /* rfkill master switch, type "any" + set = radio enabled */ +#define SW_RADIO SW_RFKILL_ALL /* deprecated */ #define SW_MAX 0x0f #define SW_CNT (SW_MAX+1) -- cgit v0.10.2 From e3aa51fecdc941c859ed0515084323d3f997aa4a Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 29 May 2008 17:51:57 -0700 Subject: acpi: fix sparse const errors In this case we want a constant pointer to constant chars: drivers/misc/thinkpad_acpi.c:3824:19: error: Just how const do you want this type to be? Like the error says. drivers/misc/thinkpad_acpi.c:3863:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3864:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3865:19: error: Just how const do you want this type to be? drivers/misc/thinkpad_acpi.c:3866:19: error: Just how const do you want this type to be? Signed-off-by: Harvey Harrison Acked-by: Henrique de Moraes Holschuh Signed-off-by: Linus Torvalds diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 3f28f6e..a0ce0b2 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3821,7 +3821,7 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */ #define TPACPI_LED_NUMLEDS 8 static struct tpacpi_led_classdev *tpacpi_leds; static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS]; -static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = { +static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { /* there's a limit of 19 chars + NULL before 2.6.26 */ "tpacpi::power", "tpacpi:orange:batt", @@ -3860,10 +3860,10 @@ static int led_get_status(unsigned int led) static int led_set_status(unsigned int led, enum led_status_t ledstatus) { /* off, on, blink. Index is led_status_t */ - static const int const led_sled_arg1[] = { 0, 1, 3 }; - static const int const led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ - static const int const led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ - static const int const led_led_arg1[] = { 0, 0x80, 0xc0 }; + static const int led_sled_arg1[] = { 0, 1, 3 }; + static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ + static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ + static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; int rc = 0; -- cgit v0.10.2 From 79d06432a27601f096e08716fee3f0a7d3b68d5f Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 30 May 2008 16:54:49 +0200 Subject: [ALSA] hda - Fix model for LG LS75 laptop Set the proper model for LG LS75 with CM9880 codec. See ALSA bug#2105: https://bugtrack.alsa-project.org/alsa-bug/view.php?id=2105 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index c73ce07..6ef57fb 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -611,6 +611,7 @@ static const char *cmi9880_models[CMI_MODELS] = { static struct snd_pci_quirk cmi9880_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x813d, "ASUS P5AD2", CMI_FULL_DIG), + SND_PCI_QUIRK(0x1854, 0x002b, "LG LS75", CMI_MINIMAL), SND_PCI_QUIRK(0x1854, 0x0032, "LG", CMI_FULL_DIG), {} /* terminator */ }; -- cgit v0.10.2 From 1f39847255a02c69190ae30c33b8ccf4c10840df Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:54:48 -0400 Subject: sata_mv: move SOC_FLAG to hpriv Convert the System-on-Chip flag from a host flag to an hpriv flag, for better consistency with other chip-rev flags, and for easier use in errata fixes etc. Also change the related "HAS_PCI()" into "!IS_SOC()" for better consistency of naming/use (everything else SOC-related already uses "SOC"). There are no functionality changes in this patch. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index fb81f0c..f6a716e 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -122,8 +122,6 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ - /* SoC integrated controllers, no PCI interface */ - MV_FLAG_SOC = (1 << 28), MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | @@ -362,6 +360,7 @@ enum { MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ MV_HP_PCIE = (1 << 9), /* PCIe bus/regs: 7042 */ MV_HP_CUT_THROUGH = (1 << 10), /* can use EDMA cut-through */ + MV_HP_FLAG_SOC = (1 << 11), /* SystemOnChip, no PCI */ /* Port private flags (pp_flags) */ MV_PP_FLAG_EDMA_EN = (1 << 0), /* is EDMA engine enabled? */ @@ -374,7 +373,7 @@ enum { #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) #define IS_PCIE(hpriv) ((hpriv)->hp_flags & MV_HP_PCIE) -#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC)) +#define IS_SOC(hpriv) ((hpriv)->hp_flags & MV_HP_FLAG_SOC) #define WINDOW_CTRL(i) (0x20030 + ((i) << 4)) #define WINDOW_BASE(i) (0x20034 + ((i) << 4)) @@ -652,7 +651,7 @@ static const struct ata_port_info mv_port_info[] = { .port_ops = &mv_iie_ops, }, { /* chip_soc */ - .flags = MV_GENIIE_FLAGS | MV_FLAG_SOC, + .flags = MV_GENIIE_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, .port_ops = &mv_iie_ops, @@ -1254,7 +1253,7 @@ static void mv_edma_cfg(struct ata_port *ap, int want_ncq) cfg |= (1 << 23); /* do not mask PM field in rx'd FIS */ cfg |= (1 << 22); /* enab 4-entry host queue cache */ - if (HAS_PCI(ap->host)) + if (!IS_SOC(hpriv)) cfg |= (1 << 18); /* enab early completion */ if (hpriv->hp_flags & MV_HP_CUT_THROUGH) cfg |= (1 << 17); /* enab cut-thru (dis stor&forwrd) */ @@ -2225,7 +2224,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) * a bogus register value which can indicate HW removal or PCI fault. */ if (pending_irqs && main_irq_cause != 0xffffffffU) { - if (unlikely((pending_irqs & PCI_ERR) && HAS_PCI(host))) + if (unlikely((pending_irqs & PCI_ERR) && !IS_SOC(hpriv))) handled = mv_pci_error(host, hpriv->base); else handled = mv_host_intr(host, pending_irqs); @@ -2876,7 +2875,7 @@ static unsigned int mv_in_pcix_mode(struct ata_host *host) void __iomem *mmio = hpriv->base; u32 reg; - if (!HAS_PCI(host) || !IS_PCIE(hpriv)) + if (IS_SOC(hpriv) || !IS_PCIE(hpriv)) return 0; /* not PCI-X capable */ reg = readl(mmio + MV_PCI_MODE_OFS); if ((reg & MV_PCI_MODE_MASK) == 0) @@ -3018,7 +3017,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) break; case chip_soc: hpriv->ops = &mv_soc_ops; - hp_flags |= MV_HP_ERRATA_60X1C0; + hp_flags |= MV_HP_FLAG_SOC | MV_HP_ERRATA_60X1C0; break; default: @@ -3062,12 +3061,12 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) if (rc) goto done; - if (HAS_PCI(host)) { - hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; - hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; - } else { + if (IS_SOC(hpriv)) { hpriv->main_irq_cause_addr = mmio + SOC_HC_MAIN_IRQ_CAUSE_OFS; hpriv->main_irq_mask_addr = mmio + SOC_HC_MAIN_IRQ_MASK_OFS; + } else { + hpriv->main_irq_cause_addr = mmio + PCI_HC_MAIN_IRQ_CAUSE_OFS; + hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } /* global interrupt mask: 0 == mask everything */ @@ -3093,7 +3092,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) mv_port_init(&ap->ioaddr, port_mmio); #ifdef CONFIG_PCI - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { unsigned int offset = port_mmio - mmio; ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); @@ -3113,7 +3112,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) writelfl(0, hc_mmio + HC_IRQ_CAUSE_OFS); } - if (HAS_PCI(host)) { + if (!IS_SOC(hpriv)) { /* Clear any currently outstanding host interrupt conditions */ writelfl(0, mmio + hpriv->irq_cause_ofs); -- cgit v0.10.2 From 8c30a8b9b574cf6c51e207464b852a6f559da153 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:56:31 -0400 Subject: sata_mv: PHY_MODEx errata fixes Fix and update the errata handling for the PHY_MODEx registers. This improves receiver noise tolerance, among other things. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index f6a716e..a39779a 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2546,7 +2546,7 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); int fix_phy_mode4 = hp_flags & (MV_HP_ERRATA_60X1B2 | MV_HP_ERRATA_60X1C0); - u32 m2, tmp; + u32 m2, m3; if (fix_phy_mode2) { m2 = readl(port_mmio + PHY_MODE2); @@ -2563,27 +2563,27 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, udelay(200); } - /* who knows what this magic does */ - tmp = readl(port_mmio + PHY_MODE3); - tmp &= ~0x7F800000; - tmp |= 0x2A800000; - writel(tmp, port_mmio + PHY_MODE3); + /* + * Gen-II/IIe PHY_MODE3 errata RM#2: + * Achieves better receiver noise performance than the h/w default: + */ + m3 = readl(port_mmio + PHY_MODE3); + m3 = (m3 & 0x1f) | (0x5555601 << 5); + writel(m3, port_mmio + PHY_MODE3); if (fix_phy_mode4) { u32 m4; m4 = readl(port_mmio + PHY_MODE4); - if (hp_flags & MV_HP_ERRATA_60X1B2) - tmp = readl(port_mmio + PHY_MODE3); - /* workaround for errata FEr SATA#10 (part 1) */ m4 = (m4 & ~(1 << 1)) | (1 << 0); - writel(m4, port_mmio + PHY_MODE4); + /* enforce bit restrictions on GenIIe devices */ + if (IS_GEN_IIE(hpriv)) + m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - if (hp_flags & MV_HP_ERRATA_60X1B2) - writel(tmp, port_mmio + PHY_MODE3); + writel(m4, port_mmio + PHY_MODE4); } /* Revert values of pre-emphasis and signal amps to the saved ones */ -- cgit v0.10.2 From 5cf73bfb061552aa18d816d2859409be9ace5306 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Tue, 27 May 2008 17:58:56 -0400 Subject: sata_mv: nuke unreleased GenIIe revisions The only public release of the 6042/7042 chips was/is revision "B0". Remove code that attempted to deal with earlier, non-released revs. This matches the logic of the current Marvell "proprietary" driver. Also, bump up the sata_mv version number, to reflect this batch of erratas. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index a39779a..969a769 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.21" +#define DRV_VERSION "1.22" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -354,7 +354,6 @@ enum { MV_HP_ERRATA_50XXB2 = (1 << 2), MV_HP_ERRATA_60X1B2 = (1 << 3), MV_HP_ERRATA_60X1C0 = (1 << 4), - MV_HP_ERRATA_XX42A0 = (1 << 5), MV_HP_GEN_I = (1 << 6), /* Generation I: 50xx */ MV_HP_GEN_II = (1 << 7), /* Generation II: 60xx */ MV_HP_GEN_IIE = (1 << 8), /* Generation IIE: 6042/7042 */ @@ -811,12 +810,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, writel((pp->crqb_dma >> 16) >> 16, port_mmio + EDMA_REQ_Q_BASE_HI_OFS); writelfl((pp->crqb_dma & EDMA_REQ_Q_BASE_LO_MASK) | index, port_mmio + EDMA_REQ_Q_IN_PTR_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crqb_dma & 0xffffffff) | index, - port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); + writelfl(index, port_mmio + EDMA_REQ_Q_OUT_PTR_OFS); /* * initialize response queue @@ -826,13 +820,7 @@ static void mv_set_edma_ptrs(void __iomem *port_mmio, WARN_ON(pp->crpb_dma & 0xff); writel((pp->crpb_dma >> 16) >> 16, port_mmio + EDMA_RSP_Q_BASE_HI_OFS); - - if (hpriv->hp_flags & MV_HP_ERRATA_XX42A0) - writelfl((pp->crpb_dma & 0xffffffff) | index, - port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - else - writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); - + writelfl(index, port_mmio + EDMA_RSP_Q_IN_PTR_OFS); writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | index, port_mmio + EDMA_RSP_Q_OUT_PTR_OFS); } @@ -3002,10 +2990,7 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) hp_flags |= MV_HP_CUT_THROUGH; switch (pdev->revision) { - case 0x0: - hp_flags |= MV_HP_ERRATA_XX42A0; - break; - case 0x1: + case 0x2: /* Rev.B0: the first/only public release */ hp_flags |= MV_HP_ERRATA_60X1C0; break; default: -- cgit v0.10.2 From b406c7a6655da7a2fcd9f72e41262f93ff707748 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 28 May 2008 12:01:12 -0400 Subject: sata_mv: workaround for 60x1 errata sata13 The "B2" variant of the 6041/6081 (genII) chips requires that the PHY_MODE3 register be rewritten after any write to PHY_MODE4. This fixes a regression introduced by an earlier patch. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 969a769..17093e6 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.22" +#define DRV_VERSION "1.23" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2557,7 +2557,6 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, */ m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); - writel(m3, port_mmio + PHY_MODE3); if (fix_phy_mode4) { u32 m4; @@ -2573,6 +2572,12 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, writel(m4, port_mmio + PHY_MODE4); } + /* + * Workaround for 60x1-B2 errata SATA#13: + * Any write to PHY_MODE4 (above) may corrupt PHY_MODE3, + * so we must always rewrite PHY_MODE3 after PHY_MODE4. + */ + writel(m3, port_mmio + PHY_MODE3); /* Revert values of pre-emphasis and signal amps to the saved ones */ m2 = readl(port_mmio + PHY_MODE2); -- cgit v0.10.2 From 0388a8c0d54aa039758a8eca68d82325a563f8db Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 28 May 2008 13:41:52 -0400 Subject: sata_mv: implement SoC guideline SATA_S11 The 5182 System-On-Chip (SOC) variant wants certain lower bits to be cleared on any write to the PHY_MODE3 register. If/when support is added for other SOC variants, we'll need some way to uniquely identify the 5182, and not perform this workaround for the others. But for now, it is the only SOC variant we support here. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 17093e6..acf347f 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.23" +#define DRV_VERSION "1.24" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -2558,6 +2558,10 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 = readl(port_mmio + PHY_MODE3); m3 = (m3 & 0x1f) | (0x5555601 << 5); + /* Guideline 88F5182 (GL# SATA-S11) */ + if (IS_SOC(hpriv)) + m3 &= ~0x1c; + if (fix_phy_mode4) { u32 m4; -- cgit v0.10.2 From 23cf296e3b047da46112eb6b4dc89917c93c8f19 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Thu, 29 May 2008 22:04:22 +0900 Subject: ata_piix: fix macbook ich8m problems ICH8M on macbooks are peculiar in that some of them lock up when the second port is enabled, some return bogus values on SIDPR access while yet others hang on SIDPR access. Also, the ich8m_apple_sata entry was wrongly added below generic ich8m entry making it virtually useless. This patch works around macbook ich8m problems by * moving ich8m_apple_sata entry above generic ich8m entry * dropping PIIX_FLAG_SIDPR from ich8m_apple_sata * adding subsystem 106b:00a1 as ich8m_apple_sata Reported and tested by MATSUBAYASHI. Signed-off-by: Tejun Heo Cc: MATSUBAYASHI 'Shaolin' Kohji Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index a9027b8..3548ee7 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -247,10 +247,11 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x2820, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller 2 IDE (ICH8) */ { 0x8086, 0x2825, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_2port_sata }, - /* Mobile SATA Controller IDE (ICH8M) */ - { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* Mobile SATA Controller IDE (ICH8M), Apple */ { 0x8086, 0x2828, 0x106b, 0x00a0, 0, 0, ich8m_apple_sata }, + { 0x8086, 0x2828, 0x106b, 0x00a1, 0, 0, ich8m_apple_sata }, + /* Mobile SATA Controller IDE (ICH8M) */ + { 0x8086, 0x2828, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ { 0x8086, 0x2920, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata }, /* SATA Controller IDE (ICH9) */ @@ -526,7 +527,7 @@ static struct ata_port_info piix_port_info[] = { [ich8m_apple_sata] = { - .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SIDPR, + .flags = PIIX_SATA_FLAGS, .pio_mask = 0x1f, /* pio0-4 */ .mwdma_mask = 0x07, /* mwdma0-2 */ .udma_mask = ATA_UDMA6, -- cgit v0.10.2 From 2da676594a73825f10d2a99358cc7465119684f9 Mon Sep 17 00:00:00 2001 From: Pradeep Singh Rautela Date: Thu, 29 May 2008 23:28:14 +0530 Subject: ata: Convert to static DEFINE_SPINLOCK(lock) Replace deprecated static spinlock_t instance to static DEFINE_SPINLOCK(lock). Signed-off-by: Pradeep Singh Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 3c89f20..cc816ca 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5403,7 +5403,7 @@ static void ata_host_stop(struct device *gendev, void *res) */ static void ata_finalize_port_ops(struct ata_port_operations *ops) { - static spinlock_t lock = SPIN_LOCK_UNLOCKED; + static DEFINE_SPINLOCK(lock); const struct ata_port_operations *cur; void **begin = (void **)ops; void **end = (void **)&ops->inherits; -- cgit v0.10.2 From ec2a20e61974f7c9ebe6dd99ac479ec309a750bc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 30 Apr 2008 12:57:00 -0700 Subject: libata: fix libata-scsi kernel-doc notation Fix libata-scsi kernel-doc notation: Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1659): No description found for parameter 'cmd' Warning(linux-2.6.25-git15//drivers/ata/libata-scsi.c:1971): No description found for parameter 'buf' Signed-off-by: Randy Dunlap Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index aeb6e01..2e6e162 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -1637,6 +1637,7 @@ defer: /** * ata_scsi_rbuf_get - Map response buffer. + * @cmd: SCSI command containing buffer to be mapped. * @flags: unsigned long variable to store irq enable status * @copy_in: copy in from user buffer * @@ -1954,7 +1955,7 @@ static unsigned int ata_msense_ctl_mode(u8 *buf) /** * ata_msense_rw_recovery - Simulate MODE SENSE r/w error recovery page - * @bufp: output buffer + * @buf: output buffer * * Generate a generic MODE SENSE r/w error recovery page. * -- cgit v0.10.2 From 19ef9d5e45ce805700f34c248a71a511877b8a5d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 21 May 2008 14:11:24 +0900 Subject: libata: SRST can't be trusted on PMP sil3726 As in sil4726, SRST can't be trusted on sil3726 causing detection problems under certain configuraitons. I thought it was from the Config Disk device but apparently not. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c index 0f9386d..7daf4c0 100644 --- a/drivers/ata/libata-pmp.c +++ b/drivers/ata/libata-pmp.c @@ -322,9 +322,12 @@ static void sata_pmp_quirks(struct ata_port *ap) if (vendor == 0x1095 && devid == 0x3726) { /* sil3726 quirks */ ata_port_for_each_link(link, ap) { - /* class code report is unreliable */ + /* Class code report is unreliable and SRST + * times out under certain configurations. + */ if (link->pmp < 5) - link->flags |= ATA_LFLAG_ASSUME_ATA; + link->flags |= ATA_LFLAG_NO_SRST | + ATA_LFLAG_ASSUME_ATA; /* port 5 is for SEMB device and it doesn't like SRST */ if (link->pmp == 5) -- cgit v0.10.2 From 034d8e8f273fcb02bebd6a62d8023ffa409fe92f Mon Sep 17 00:00:00 2001 From: Ashish Kalra Date: Tue, 20 May 2008 00:19:45 -0500 Subject: [libata] sata_fsl: Fix broken driver, add port multiplier (PMP) support The following commit (4c9bf4e799ce06a7378f1196587084802a414c03): libata: replace tf_read with qc_fill_rtf for non-SFF drivers Broke the sata_fsl.c driver in 2.6.26-rc. I know the following patch fixes the issue, it clearly also adds port multipler support. The current 2.6.26-rc driver is broken. On boot with debug enabled we get something like (w/o this patch): spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 spurious interrupt!!, CC = 0x1 interrupt status 0x1 xx_scr_read, reg_in = 1 .. continues for ever. This change fixes this as a side effect of adding port multiplier support. Signed-off-by: Ashish Kalra Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 853559e..3924e72 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -34,7 +34,7 @@ enum { SATA_FSL_HOST_FLAGS = (ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_PIO_DMA | - ATA_FLAG_NCQ), + ATA_FLAG_PMP | ATA_FLAG_NCQ), SATA_FSL_MAX_CMDS = SATA_FSL_QUEUE_DEPTH, SATA_FSL_CMD_HDR_SIZE = 16, /* 4 DWORDS */ @@ -395,7 +395,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc) cd = (struct command_desc *)pp->cmdentry + tag; cd_paddr = pp->cmdentry_paddr + tag * SATA_FSL_CMD_DESC_SIZE; - ata_tf_to_fis(&qc->tf, 0, 1, (u8 *) &cd->cfis); + ata_tf_to_fis(&qc->tf, qc->dev->link->pmp, 1, (u8 *) &cd->cfis); VPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x\n", cd->cfis[0], cd->cfis[1], cd->cfis[2]); @@ -438,6 +438,8 @@ static unsigned int sata_fsl_qc_issue(struct ata_queued_cmd *qc) ioread32(CA + hcr_base), ioread32(CE + hcr_base), ioread32(CC + hcr_base)); + iowrite32(qc->dev->link->pmp, CQPMP + hcr_base); + /* Simply queue command to the controller/device */ iowrite32(1 << tag, CQ + hcr_base); @@ -558,11 +560,36 @@ static void sata_fsl_thaw(struct ata_port *ap) ioread32(hcr_base + HCONTROL), ioread32(hcr_base + HSTATUS)); } +static void sata_fsl_pmp_attach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | HCONTROL_PMP_ATTACHED), hcr_base + HCONTROL); +} + +static void sata_fsl_pmp_detach(struct ata_port *ap) +{ + struct sata_fsl_host_priv *host_priv = ap->host->private_data; + void __iomem *hcr_base = host_priv->hcr_base; + u32 temp; + + temp = ioread32(hcr_base + HCONTROL); + temp &= ~HCONTROL_PMP_ATTACHED; + iowrite32(temp, hcr_base + HCONTROL); + + /* enable interrupts on the controller/port */ + temp = ioread32(hcr_base + HCONTROL); + iowrite32((temp | DEFAULT_PORT_IRQ_ENABLE_MASK), hcr_base + HCONTROL); + +} + static int sata_fsl_port_start(struct ata_port *ap) { struct device *dev = ap->host->dev; struct sata_fsl_port_priv *pp; - int retval; void *mem; dma_addr_t mem_dma; struct sata_fsl_host_priv *host_priv = ap->host->private_data; @@ -688,12 +715,13 @@ static int sata_fsl_prereset(struct ata_link *link, unsigned long deadline) } static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) + unsigned long deadline) { struct ata_port *ap = link->ap; struct sata_fsl_port_priv *pp = ap->private_data; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; + int pmp = sata_srst_pmp(link); u32 temp; struct ata_taskfile tf; u8 *cfis; @@ -703,6 +731,9 @@ static int sata_fsl_softreset(struct ata_link *link, unsigned int *class, DPRINTK("in xx_softreset\n"); + if (pmp != SATA_PMP_CTRL_PORT) + goto issue_srst; + try_offline_again: /* * Force host controller to go off-line, aborting current operations @@ -746,6 +777,7 @@ try_offline_again: temp = ioread32(hcr_base + HCONTROL); temp |= (HCONTROL_ONLINE_PHY_RST | HCONTROL_SNOOP_ENABLE); + temp |= HCONTROL_PMP_ATTACHED; iowrite32(temp, hcr_base + HCONTROL); temp = ata_wait_register(hcr_base + HSTATUS, ONLINE, 0, 1, 500); @@ -771,7 +803,8 @@ try_offline_again: ata_port_printk(ap, KERN_WARNING, "No Device OR PHYRDY change,Hstatus = 0x%x\n", ioread32(hcr_base + HSTATUS)); - goto err; + *class = ATA_DEV_NONE; + goto out; } /* @@ -783,7 +816,8 @@ try_offline_again: if ((temp & 0xFF) != 0x18) { ata_port_printk(ap, KERN_WARNING, "No Signature Update\n"); - goto err; + *class = ATA_DEV_NONE; + goto out; } else { ata_port_printk(ap, KERN_INFO, "Signature Update detected @ %d msecs\n", @@ -798,6 +832,7 @@ try_offline_again: * reached here, we can send a command to the target device */ +issue_srst: DPRINTK("Sending SRST/device reset\n"); ata_tf_init(link->device, &tf); @@ -808,7 +843,7 @@ try_offline_again: SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); DPRINTK("Dumping cfis : 0x%x, 0x%x, 0x%x, 0x%x\n", cfis[0], cfis[1], cfis[2], cfis[3]); @@ -854,8 +889,10 @@ try_offline_again: sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5); tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */ - ata_tf_to_fis(&tf, 0, 0, cfis); + ata_tf_to_fis(&tf, pmp, 0, cfis); + if (pmp != SATA_PMP_CTRL_PORT) + iowrite32(pmp, CQPMP + hcr_base); iowrite32(1, CQ + hcr_base); msleep(150); /* ?? */ @@ -886,12 +923,21 @@ try_offline_again: VPRINTK("cereg = 0x%x\n", ioread32(hcr_base + CE)); } +out: return 0; err: return -EIO; } +static void sata_fsl_error_handler(struct ata_port *ap) +{ + + DPRINTK("in xx_error_handler\n"); + sata_pmp_error_handler(ap); + +} + static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) { if (qc->flags & ATA_QCFLAG_FAILED) @@ -905,18 +951,21 @@ static void sata_fsl_post_internal_cmd(struct ata_queued_cmd *qc) static void sata_fsl_error_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; - struct ata_eh_info *ehi = &link->eh_info; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; - u32 hstatus, dereg, cereg = 0, SError = 0; + u32 hstatus, dereg=0, cereg = 0, SError = 0; unsigned int err_mask = 0, action = 0; - struct ata_queued_cmd *qc; - int freeze = 0; + int freeze = 0, abort=0; + struct ata_link *link = NULL; + struct ata_queued_cmd *qc = NULL; + struct ata_eh_info *ehi; hstatus = ioread32(hcr_base + HSTATUS); cereg = ioread32(hcr_base + CE); + /* first, analyze and record host port events */ + link = &ap->link; + ehi = &link->eh_info; ata_ehi_clear_desc(ehi); /* @@ -926,42 +975,28 @@ static void sata_fsl_error_intr(struct ata_port *ap) sata_fsl_scr_read(ap, SCR_ERROR, &SError); if (unlikely(SError & 0xFFFF0000)) { sata_fsl_scr_write(ap, SCR_ERROR, SError); - err_mask |= AC_ERR_ATA_BUS; } DPRINTK("error_intr,hStat=0x%x,CE=0x%x,DE =0x%x,SErr=0x%x\n", hstatus, cereg, ioread32(hcr_base + DE), SError); - /* handle single device errors */ - if (cereg) { - /* - * clear the command error, also clears queue to the device - * in error, and we can (re)issue commands to this device. - * When a device is in error all commands queued into the - * host controller and at the device are considered aborted - * and the queue for that device is stopped. Now, after - * clearing the device error, we can issue commands to the - * device to interrogate it to find the source of the error. - */ - dereg = ioread32(hcr_base + DE); - iowrite32(dereg, hcr_base + DE); - iowrite32(cereg, hcr_base + CE); + /* handle fatal errors */ + if (hstatus & FATAL_ERROR_DECODE) { + ehi->err_mask |= AC_ERR_ATA_BUS; + ehi->action |= ATA_EH_SOFTRESET; - DPRINTK("single device error, CE=0x%x, DE=0x%x\n", - ioread32(hcr_base + CE), ioread32(hcr_base + DE)); /* - * We should consider this as non fatal error, and TF must - * be updated as done below. + * Ignore serror in case of fatal errors as we always want + * to do a soft-reset of the FSL SATA controller. Analyzing + * serror may cause libata to schedule a hard-reset action, + * and hard-reset currently does not do controller + * offline/online, causing command timeouts and leads to an + * un-recoverable state, hence make libATA ignore + * autopsy in case of fatal errors. */ - err_mask |= AC_ERR_DEV; - } + ehi->flags |= ATA_EHI_NO_AUTOPSY; - /* handle fatal errors */ - if (hstatus & FATAL_ERROR_DECODE) { - err_mask |= AC_ERR_ATA_BUS; - action |= ATA_EH_RESET; - /* how will fatal error interrupts be completed ?? */ freeze = 1; } @@ -971,30 +1006,83 @@ static void sata_fsl_error_intr(struct ata_port *ap) /* Setup a soft-reset EH action */ ata_ehi_hotplugged(ehi); + ata_ehi_push_desc(ehi, "%s", "PHY RDY changed"); freeze = 1; } - /* record error info */ - qc = ata_qc_from_tag(ap, link->active_tag); + /* handle single device errors */ + if (cereg) { + /* + * clear the command error, also clears queue to the device + * in error, and we can (re)issue commands to this device. + * When a device is in error all commands queued into the + * host controller and at the device are considered aborted + * and the queue for that device is stopped. Now, after + * clearing the device error, we can issue commands to the + * device to interrogate it to find the source of the error. + */ + abort = 1; + + DPRINTK("single device error, CE=0x%x, DE=0x%x\n", + ioread32(hcr_base + CE), ioread32(hcr_base + DE)); - if (qc) + /* find out the offending link and qc */ + if (ap->nr_pmp_links) { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + if (dereg < ap->nr_pmp_links) { + link = &ap->pmp_link[dereg]; + ehi = &link->eh_info; + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + + err_mask |= AC_ERR_DEV; + + } else { + err_mask |= AC_ERR_HSM; + action |= ATA_EH_HARDRESET; + freeze = 1; + } + } else { + dereg = ioread32(hcr_base + DE); + iowrite32(dereg, hcr_base + DE); + iowrite32(cereg, hcr_base + CE); + + qc = ata_qc_from_tag(ap, link->active_tag); + /* + * We should consider this as non fatal error, + * and TF must be updated as done below. + */ + err_mask |= AC_ERR_DEV; + } + } + + /* record error info */ + if (qc) { qc->err_mask |= err_mask; - else + } else ehi->err_mask |= err_mask; ehi->action |= action; - ehi->serror |= SError; /* freeze or abort */ if (freeze) ata_port_freeze(ap); - else - ata_port_abort(ap); + else if (abort) { + if (qc) + ata_link_abort(qc->dev->link); + else + ata_port_abort(ap); + } } static void sata_fsl_host_intr(struct ata_port *ap) { - struct ata_link *link = &ap->link; struct sata_fsl_host_priv *host_priv = ap->host->private_data; void __iomem *hcr_base = host_priv->hcr_base; u32 hstatus, qc_active = 0; @@ -1017,10 +1105,19 @@ static void sata_fsl_host_intr(struct ata_port *ap) return; } - if (link->sactive) { /* only true for NCQ commands */ + /* Read command completed register */ + qc_active = ioread32(hcr_base + CC); + + VPRINTK("Status of all queues :\n"); + VPRINTK("qc_active/CC = 0x%x, CA = 0x%x, CE=0x%x,CQ=0x%x,apqa=0x%x\n", + qc_active, + ioread32(hcr_base + CA), + ioread32(hcr_base + CE), + ioread32(hcr_base + CQ), + ap->qc_active); + + if (qc_active & ap->qc_active) { int i; - /* Read command completed register */ - qc_active = ioread32(hcr_base + CC); /* clear CC bit, this will also complete the interrupt */ iowrite32(qc_active, hcr_base + CC); @@ -1032,8 +1129,9 @@ static void sata_fsl_host_intr(struct ata_port *ap) for (i = 0; i < SATA_FSL_QUEUE_DEPTH; i++) { if (qc_active & (1 << i)) { qc = ata_qc_from_tag(ap, i); - if (qc) + if (qc) { ata_qc_complete(qc); + } DPRINTK ("completing ncq cmd,tag=%d,CC=0x%x,CA=0x%x\n", i, ioread32(hcr_base + CC), @@ -1042,19 +1140,21 @@ static void sata_fsl_host_intr(struct ata_port *ap) } return; - } else if (ap->qc_active) { + } else if ((ap->qc_active & (1 << ATA_TAG_INTERNAL))) { iowrite32(1, hcr_base + CC); - qc = ata_qc_from_tag(ap, link->active_tag); + qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL); - DPRINTK("completing non-ncq cmd, tag=%d,CC=0x%x\n", - link->active_tag, ioread32(hcr_base + CC)); + DPRINTK("completing non-ncq cmd, CC=0x%x\n", + ioread32(hcr_base + CC)); - if (qc) + if (qc) { ata_qc_complete(qc); + } } else { /* Spurious Interrupt!! */ DPRINTK("spurious interrupt!!, CC = 0x%x\n", ioread32(hcr_base + CC)); + iowrite32(qc_active, hcr_base + CC); return; } } @@ -1130,9 +1230,6 @@ static int sata_fsl_init_controller(struct ata_host *host) iowrite32(0x00000FFFF, hcr_base + CE); iowrite32(0x00000FFFF, hcr_base + DE); - /* initially assuming no Port multiplier, set CQPMP to 0 */ - iowrite32(0x0, hcr_base + CQPMP); - /* * host controller will be brought on-line, during xx_port_start() * callback, that should also initiate the OOB, COMINIT sequence @@ -1154,8 +1251,8 @@ static struct scsi_host_template sata_fsl_sht = { .dma_boundary = ATA_DMA_BOUNDARY, }; -static const struct ata_port_operations sata_fsl_ops = { - .inherits = &sata_port_ops, +static struct ata_port_operations sata_fsl_ops = { + .inherits = &sata_pmp_port_ops, .qc_prep = sata_fsl_qc_prep, .qc_issue = sata_fsl_qc_issue, @@ -1168,10 +1265,15 @@ static const struct ata_port_operations sata_fsl_ops = { .thaw = sata_fsl_thaw, .prereset = sata_fsl_prereset, .softreset = sata_fsl_softreset, + .pmp_softreset = sata_fsl_softreset, + .error_handler = sata_fsl_error_handler, .post_internal_cmd = sata_fsl_post_internal_cmd, .port_start = sata_fsl_port_start, .port_stop = sata_fsl_port_stop, + + .pmp_attach = sata_fsl_pmp_attach, + .pmp_detach = sata_fsl_pmp_detach, }; static const struct ata_port_info sata_fsl_port_info[] = { -- cgit v0.10.2 From 3072c379bccfa2844e33103ed9ff530780e660ea Mon Sep 17 00:00:00 2001 From: peerchen Date: Mon, 19 May 2008 14:44:57 +0800 Subject: ahci: change the Device IDs of nvidia MCP7B AHCI controller in ahci.c Change the partial Device IDs of nvidia MCP7B AHCI controller in ahci.c, as the actual PCI IDs deployed in the field differed from the forecasted ones preemptively placed in the driver. Signed-off-by: Peer Chen Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 97f83fb..544b7d6 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -502,10 +502,10 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bcd), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bce), board_ahci }, /* MCP7B */ { PCI_VDEVICE(NVIDIA, 0x0bcf), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd0), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd1), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd2), board_ahci }, /* MCP7B */ - { PCI_VDEVICE(NVIDIA, 0x0bd3), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc4), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc5), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc6), board_ahci }, /* MCP7B */ + { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ -- cgit v0.10.2 From a9b841e1a336822a25899ec8cdf70a55a6696ae7 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 May 2008 13:39:12 +1000 Subject: PCI: fix rpadlpar pci hotplug driver sysfs usage When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/rpadlpar_sysfs.c b/drivers/pci/hotplug/rpadlpar_sysfs.c index e32148a..779c5db 100644 --- a/drivers/pci/hotplug/rpadlpar_sysfs.c +++ b/drivers/pci/hotplug/rpadlpar_sysfs.c @@ -18,8 +18,12 @@ #include "rpadlpar.h" #define DLPAR_KOBJ_NAME "control" -#define ADD_SLOT_ATTR_NAME "add_slot" -#define REMOVE_SLOT_ATTR_NAME "remove_slot" + +/* Those two have no quotes because they are passed to __ATTR() which + * stringifies the argument (yuck !) + */ +#define ADD_SLOT_ATTR_NAME add_slot +#define REMOVE_SLOT_ATTR_NAME remove_slot #define MAX_DRC_NAME_LEN 64 -- cgit v0.10.2 From 57f50ca127a3189566af0d6378394c75a26f0f7e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Fri, 30 May 2008 17:02:50 +0200 Subject: drivers/watchdog/geodewdt.c: build fix * Wim Van Sebroeck wrote: > Author: Jordan Crouse > Date: Mon Jan 21 10:07:00 2008 -0700 > > [WATCHDOG] Add a watchdog driver based on the CS5535/CS5536 MFGPT timers -tip testing found the following build failure on latest -git: drivers/watchdog/geodewdt.c: In function 'geodewdt_probe': drivers/watchdog/geodewdt.c:225: error: too many arguments to function 'geode_mfgpt_alloc_timer' make[1]: *** [drivers/watchdog/geodewdt.o] Error 1 make: *** [drivers/watchdog/geodewdt.o] Error 2 with this config: http://redhat.com/~mingo/misc/config-Fri_May_30_15_19_52_CEST_2008.bad find the fix below. Signed-off-by: Ingo Molnar Acked-by: Jordan Crouse Signed-off-by: Linus Torvalds diff --git a/drivers/watchdog/geodewdt.c b/drivers/watchdog/geodewdt.c index f85b196..30d09cb 100644 --- a/drivers/watchdog/geodewdt.c +++ b/drivers/watchdog/geodewdt.c @@ -221,8 +221,7 @@ geodewdt_probe(struct platform_device *dev) { int ret, timer; - timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, - MFGPT_DOMAIN_WORKING, THIS_MODULE); + timer = geode_mfgpt_alloc_timer(MFGPT_TIMER_ANY, MFGPT_DOMAIN_WORKING); if (timer == -1) { printk(KERN_ERR "geodewdt: No timers were available\n"); -- cgit v0.10.2 From 3c39740073b20d4cbb0e3567225500e96acf383c Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Mon, 19 May 2008 14:25:39 -0700 Subject: [SCSI] qla2xxx: Revert "qla2xxx: Use proper HA during asynchronous event handling." This reverts commit bd2a1846b2313e32d0270151a31a6b8335384a20. The original (prior to the reverted commit) code was correct. Additionally, the vp_idx should be checked during MBA_PORT_UPDATE in order for proper handling to take place for a given vport. Signed-off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 14bcd7c..ec63b79 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -272,8 +272,6 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) uint32_t rscn_entry, host_pid; uint8_t rscn_queue_index; unsigned long flags; - scsi_qla_host_t *vha; - int i; /* Setup to process RIO completion. */ handle_cnt = 0; @@ -544,18 +542,10 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_PORT_UPDATE: /* Port database update */ - if ((ha->flags.npiv_supported) && (ha->num_vhosts)) { - for_each_mapped_vp_idx(ha, i) { - list_for_each_entry(vha, &ha->vp_list, - vp_list) { - if ((mb[3] & 0xff) - == vha->vp_idx) { - ha = vha; - break; - } - } - } - } + /* Only handle SCNs for our Vport index. */ + if (ha->parent && ha->vp_idx != (mb[3] & 0xff)) + break; + /* * If PORT UPDATE is global (recieved LIP_OCCURED/LIP_RESET * event etc. earlier indicating loop is down) then process @@ -590,18 +580,12 @@ qla2x00_async_event(scsi_qla_host_t *ha, uint16_t *mb) break; case MBA_RSCN_UPDATE: /* State Change Registration */ - if ((ha->flags.npiv_supported) && (ha->num_vhosts)) { - for_each_mapped_vp_idx(ha, i) { - list_for_each_entry(vha, &ha->vp_list, - vp_list) { - if ((mb[3] & 0xff) - == vha->vp_idx) { - ha = vha; - break; - } - } - } - } + /* Check if the Vport has issued a SCR */ + if (ha->parent && test_bit(VP_SCR_NEEDED, &ha->vp_flags)) + break; + /* Only handle SCNs for our Vport index. */ + if (ha->parent && ha->vp_idx != (mb[3] & 0xff)) + break; DEBUG2(printk("scsi(%ld): Asynchronous RSCR UPDATE.\n", ha->host_no)); -- cgit v0.10.2 From 08b95a12cd956e98b4a1ad5b638935dcb6c88c67 Mon Sep 17 00:00:00 2001 From: Seokmann Ju Date: Mon, 19 May 2008 14:25:40 -0700 Subject: [SCSI] qla2xxx: Correct handling of AENs postings for vports. Initialize all proper structure members in order to support work-list vport processing. This code also properly acquires the correct (physical hardware_lock) lock during work submission. Signed-off-by: Seokmann Ju Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index fc55429..62a3ad6 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -406,6 +406,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) INIT_LIST_HEAD(&vha->list); INIT_LIST_HEAD(&vha->fcports); INIT_LIST_HEAD(&vha->vp_fcports); + INIT_LIST_HEAD(&vha->work_list); vha->dpc_flags = 0L; set_bit(REGISTER_FDMI_NEEDED, &vha->dpc_flags); diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index 817f62f..48eaa3b 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -2157,13 +2157,14 @@ static int qla2x00_post_work(struct scsi_qla_host *ha, struct qla_work_evt *e, int locked) { unsigned long flags; + scsi_qla_host_t *pha = to_qla_parent(ha); if (!locked) - spin_lock_irqsave(&ha->hardware_lock, flags); + spin_lock_irqsave(&pha->hardware_lock, flags); list_add_tail(&e->list, &ha->work_list); qla2xxx_wake_dpc(ha); if (!locked) - spin_unlock_irqrestore(&ha->hardware_lock, flags); + spin_unlock_irqrestore(&pha->hardware_lock, flags); return QLA_SUCCESS; } @@ -2203,12 +2204,13 @@ static void qla2x00_do_work(struct scsi_qla_host *ha) { struct qla_work_evt *e; + scsi_qla_host_t *pha = to_qla_parent(ha); - spin_lock_irq(&ha->hardware_lock); + spin_lock_irq(&pha->hardware_lock); while (!list_empty(&ha->work_list)) { e = list_entry(ha->work_list.next, struct qla_work_evt, list); list_del_init(&e->list); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irq(&pha->hardware_lock); switch (e->type) { case QLA_EVT_AEN: @@ -2222,9 +2224,9 @@ qla2x00_do_work(struct scsi_qla_host *ha) } if (e->flags & QLA_EVT_FLAG_FREE) kfree(e); - spin_lock_irq(&ha->hardware_lock); + spin_lock_irq(&pha->hardware_lock); } - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irq(&pha->hardware_lock); } /************************************************************************** -- cgit v0.10.2 From 28d7647de2ee075aaed5ca835f445e885884f163 Mon Sep 17 00:00:00 2001 From: Andrew Vasquez Date: Mon, 19 May 2008 14:25:41 -0700 Subject: [SCSI] qla2xxx: Update version number to 8.02.01-k4. Signed-off-by: Andrew Vasquez Signed-off-by: James Bottomley diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index b42e3f2..d058c88 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.02.01-k3" +#define QLA2XXX_VERSION "8.02.01-k4" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 2 -- cgit v0.10.2 From 14d03fd98e076c6e60e1085a962410dc4d70ab59 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 30 May 2008 14:02:21 -0700 Subject: Mark 'scripts/decodecode' executable .. because it is. Signed-off-by: Linus Torvalds diff --git a/scripts/decodecode b/scripts/decodecode old mode 100644 new mode 100755 -- cgit v0.10.2 From a12630b186d56a77d17c9b34c82b88dda4337ed7 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 9 May 2008 18:49:29 -0700 Subject: ocfs2: Rename 'user_stack' plugin structure to 'ocfs2_user_plugin' The static structure describing the userspace cluster plugin for ocfs2 was named 'user_stack', which is a real pain when people are grep(1)ing the tree for the program stack object 'user_stack'. Change the name to something distinct and namespaced. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index b503772..6b97d11 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -61,7 +61,7 @@ * negotiated by the client. The client negotiates based on the maximum * version advertised in /sys/fs/ocfs2/max_locking_protocol. The major * number from the "SETV" message must match - * user_stack.sp_proto->lp_max_version.pv_major, and the minor number + * ocfs2_user_plugin.sp_proto->lp_max_version.pv_major, and the minor number * must be less than or equal to ...->lp_max_version.pv_minor. * * Once this information has been set, mounts will be allowed. From this @@ -153,7 +153,7 @@ union ocfs2_control_message { struct ocfs2_control_message_down u_down; }; -static struct ocfs2_stack_plugin user_stack; +static struct ocfs2_stack_plugin ocfs2_user_plugin; static atomic_t ocfs2_control_opened; static int ocfs2_control_this_node = -1; @@ -399,7 +399,7 @@ static int ocfs2_control_do_setversion_msg(struct file *file, char *ptr = NULL; struct ocfs2_control_private *p = file->private_data; struct ocfs2_protocol_version *max = - &user_stack.sp_proto->lp_max_version; + &ocfs2_user_plugin.sp_proto->lp_max_version; if (ocfs2_control_get_handshake_state(file) != OCFS2_CONTROL_HANDSHAKE_PROTOCOL) @@ -680,7 +680,7 @@ static void fsdlm_lock_ast_wrapper(void *astarg) struct dlm_lksb *lksb = fsdlm_astarg_to_lksb(astarg); int status = lksb->sb_status; - BUG_ON(user_stack.sp_proto == NULL); + BUG_ON(ocfs2_user_plugin.sp_proto == NULL); /* * For now we're punting on the issue of other non-standard errors @@ -693,16 +693,16 @@ static void fsdlm_lock_ast_wrapper(void *astarg) */ if (status == -DLM_EUNLOCK || status == -DLM_ECANCEL) - user_stack.sp_proto->lp_unlock_ast(astarg, 0); + ocfs2_user_plugin.sp_proto->lp_unlock_ast(astarg, 0); else - user_stack.sp_proto->lp_lock_ast(astarg); + ocfs2_user_plugin.sp_proto->lp_lock_ast(astarg); } static void fsdlm_blocking_ast_wrapper(void *astarg, int level) { - BUG_ON(user_stack.sp_proto == NULL); + BUG_ON(ocfs2_user_plugin.sp_proto == NULL); - user_stack.sp_proto->lp_blocking_ast(astarg, level); + ocfs2_user_plugin.sp_proto->lp_blocking_ast(astarg, level); } static int user_dlm_lock(struct ocfs2_cluster_connection *conn, @@ -838,7 +838,7 @@ static int user_cluster_this_node(unsigned int *this_node) return 0; } -static struct ocfs2_stack_operations user_stack_ops = { +static struct ocfs2_stack_operations ocfs2_user_plugin_ops = { .connect = user_cluster_connect, .disconnect = user_cluster_disconnect, .this_node = user_cluster_this_node, @@ -849,20 +849,20 @@ static struct ocfs2_stack_operations user_stack_ops = { .dump_lksb = user_dlm_dump_lksb, }; -static struct ocfs2_stack_plugin user_stack = { +static struct ocfs2_stack_plugin ocfs2_user_plugin = { .sp_name = "user", - .sp_ops = &user_stack_ops, + .sp_ops = &ocfs2_user_plugin_ops, .sp_owner = THIS_MODULE, }; -static int __init user_stack_init(void) +static int __init ocfs2_user_plugin_init(void) { int rc; rc = ocfs2_control_init(); if (!rc) { - rc = ocfs2_stack_glue_register(&user_stack); + rc = ocfs2_stack_glue_register(&ocfs2_user_plugin); if (rc) ocfs2_control_exit(); } @@ -870,14 +870,14 @@ static int __init user_stack_init(void) return rc; } -static void __exit user_stack_exit(void) +static void __exit ocfs2_user_plugin_exit(void) { - ocfs2_stack_glue_unregister(&user_stack); + ocfs2_stack_glue_unregister(&ocfs2_user_plugin); ocfs2_control_exit(); } MODULE_AUTHOR("Oracle"); MODULE_DESCRIPTION("ocfs2 driver for userspace cluster stacks"); MODULE_LICENSE("GPL"); -module_init(user_stack_init); -module_exit(user_stack_exit); +module_init(ocfs2_user_plugin_init); +module_exit(ocfs2_user_plugin_exit); -- cgit v0.10.2 From 271d772d02507c7541d5e6b4938ed2380e59a39a Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 12 May 2008 18:31:35 -0700 Subject: [PATCH 1/3] ocfs2/net: Silence build warnings This patch silences the build warnings concerning o2net_debugfs_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/cluster/tcp.h b/fs/ocfs2/cluster/tcp.h index a705d5d..fd6179e 100644 --- a/fs/ocfs2/cluster/tcp.h +++ b/fs/ocfs2/cluster/tcp.h @@ -128,23 +128,23 @@ void o2net_debug_del_nst(struct o2net_send_tracking *nst); void o2net_debug_add_sc(struct o2net_sock_container *sc); void o2net_debug_del_sc(struct o2net_sock_container *sc); #else -static int o2net_debugfs_init(void) +static inline int o2net_debugfs_init(void) { return 0; } -static void o2net_debugfs_exit(void) +static inline void o2net_debugfs_exit(void) { } -static void o2net_debug_add_nst(struct o2net_send_tracking *nst) +static inline void o2net_debug_add_nst(struct o2net_send_tracking *nst) { } -static void o2net_debug_del_nst(struct o2net_send_tracking *nst) +static inline void o2net_debug_del_nst(struct o2net_send_tracking *nst) { } -static void o2net_debug_add_sc(struct o2net_sock_container *sc) +static inline void o2net_debug_add_sc(struct o2net_sock_container *sc) { } -static void o2net_debug_del_sc(struct o2net_sock_container *sc) +static inline void o2net_debug_del_sc(struct o2net_sock_container *sc) { } #endif /* CONFIG_DEBUG_FS */ -- cgit v0.10.2 From 959040c37a8cae8117907d4aed87f1b01ff1ea19 Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 12 May 2008 18:31:36 -0700 Subject: [PATCH 2/3] ocfs2/dlm: Silence build warnings This patch silences the build warnings concerning dlm_debug_init() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/dlm/dlmdebug.h b/fs/ocfs2/dlm/dlmdebug.h index d34a62a..8c686d2 100644 --- a/fs/ocfs2/dlm/dlmdebug.h +++ b/fs/ocfs2/dlm/dlmdebug.h @@ -60,25 +60,25 @@ void dlm_destroy_debugfs_root(void); #else -static int dlm_debug_init(struct dlm_ctxt *dlm) +static inline int dlm_debug_init(struct dlm_ctxt *dlm) { return 0; } -static void dlm_debug_shutdown(struct dlm_ctxt *dlm) +static inline void dlm_debug_shutdown(struct dlm_ctxt *dlm) { } -static int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm) +static inline int dlm_create_debugfs_subroot(struct dlm_ctxt *dlm) { return 0; } -static void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm) +static inline void dlm_destroy_debugfs_subroot(struct dlm_ctxt *dlm) { } -static int dlm_create_debugfs_root(void) +static inline int dlm_create_debugfs_root(void) { return 0; } -static void dlm_destroy_debugfs_root(void) +static inline void dlm_destroy_debugfs_root(void) { } -- cgit v0.10.2 From 0f475b2abed6cbccee1da20a0bef2895eb2a0edd Mon Sep 17 00:00:00 2001 From: Sunil Mushran Date: Mon, 12 May 2008 18:31:37 -0700 Subject: [PATCH 3/3] ocfs2/net: Silence build warnings This patch silences the build warnings concerning o2net_init_nst() and friends when building without CONFIG_DEBUG_FS enabled. Signed-off-by: Sunil Mushran Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 1e44ad1..a27d615 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -142,53 +142,43 @@ static void o2net_idle_timer(unsigned long data); static void o2net_sc_postpone_idle(struct o2net_sock_container *sc); static void o2net_sc_reset_idle_timer(struct o2net_sock_container *sc); -static void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, - u32 msgkey, struct task_struct *task, u8 node) -{ #ifdef CONFIG_DEBUG_FS +void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node) +{ INIT_LIST_HEAD(&nst->st_net_debug_item); nst->st_task = task; nst->st_msg_type = msgtype; nst->st_msg_key = msgkey; nst->st_node = node; -#endif } -static void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) +void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) { -#ifdef CONFIG_DEBUG_FS do_gettimeofday(&nst->st_sock_time); -#endif } -static void o2net_set_nst_send_time(struct o2net_send_tracking *nst) +void o2net_set_nst_send_time(struct o2net_send_tracking *nst) { -#ifdef CONFIG_DEBUG_FS do_gettimeofday(&nst->st_send_time); -#endif } -static void o2net_set_nst_status_time(struct o2net_send_tracking *nst) +void o2net_set_nst_status_time(struct o2net_send_tracking *nst) { -#ifdef CONFIG_DEBUG_FS do_gettimeofday(&nst->st_status_time); -#endif } -static void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, +void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, struct o2net_sock_container *sc) { -#ifdef CONFIG_DEBUG_FS nst->st_sc = sc; -#endif } -static void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id) +void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id) { -#ifdef CONFIG_DEBUG_FS nst->st_id = msg_id; -#endif } +#endif /* CONFIG_DEBUG_FS */ static inline int o2net_reconnect_delay(void) { diff --git a/fs/ocfs2/cluster/tcp_internal.h b/fs/ocfs2/cluster/tcp_internal.h index 8d58cfe..18307ff 100644 --- a/fs/ocfs2/cluster/tcp_internal.h +++ b/fs/ocfs2/cluster/tcp_internal.h @@ -224,10 +224,42 @@ struct o2net_send_tracking { struct timeval st_send_time; struct timeval st_status_time; }; + +void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node); +void o2net_set_nst_sock_time(struct o2net_send_tracking *nst); +void o2net_set_nst_send_time(struct o2net_send_tracking *nst); +void o2net_set_nst_status_time(struct o2net_send_tracking *nst); +void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, + struct o2net_sock_container *sc); +void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, u32 msg_id); + #else struct o2net_send_tracking { u32 dummy; }; + +static inline void o2net_init_nst(struct o2net_send_tracking *nst, u32 msgtype, + u32 msgkey, struct task_struct *task, u8 node) +{ +} +static inline void o2net_set_nst_sock_time(struct o2net_send_tracking *nst) +{ +} +static inline void o2net_set_nst_send_time(struct o2net_send_tracking *nst) +{ +} +static inline void o2net_set_nst_status_time(struct o2net_send_tracking *nst) +{ +} +static inline void o2net_set_nst_sock_container(struct o2net_send_tracking *nst, + struct o2net_sock_container *sc) +{ +} +static inline void o2net_set_nst_msg_id(struct o2net_send_tracking *nst, + u32 msg_id) +{ +} #endif /* CONFIG_DEBUG_FS */ #endif /* O2CLUSTER_TCP_INTERNAL_H */ -- cgit v0.10.2 From b055629eaef7758b35dc91c76cf4f158025562bf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Fri, 30 May 2008 22:18:35 +0100 Subject: [netdrvr] sfc: Report XAUI link down at default log level This is normal when the external link is down so don't report it as an error. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/falcon_xmac.c b/drivers/net/sfc/falcon_xmac.c index dbdcee4..55c0d97 100644 --- a/drivers/net/sfc/falcon_xmac.c +++ b/drivers/net/sfc/falcon_xmac.c @@ -459,7 +459,7 @@ static int falcon_check_xaui_link_up(struct efx_nic *efx) tries--; } - EFX_ERR(efx, "Failed to bring XAUI link back up in %d tries!\n", + EFX_LOG(efx, "Failed to bring XAUI link back up in %d tries!\n", max_tries); return 0; } -- cgit v0.10.2 From 17a9440f7deb781935c76e2e55d376a35611a6f9 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Fri, 30 May 2008 11:18:55 +0800 Subject: [netdrvr] CS89X0: Add cleanup for dma after fail After request_dma() succeeding, any error path should do free_dma(). Signed-off-by: Wang Chen Signed-off-by: Jeff Garzik diff --git a/drivers/net/cs89x0.c b/drivers/net/cs89x0.c index 348371f..fba87ab 100644 --- a/drivers/net/cs89x0.c +++ b/drivers/net/cs89x0.c @@ -1394,7 +1394,11 @@ net_open(struct net_device *dev) #endif if (!result) { printk(KERN_ERR "%s: EEPROM is configured for unavailable media\n", dev->name); - release_irq: +release_dma: +#if ALLOW_DMA + free_dma(dev->dma); +#endif +release_irq: #if ALLOW_DMA release_dma_buff(lp); #endif @@ -1442,12 +1446,12 @@ net_open(struct net_device *dev) if ((result = detect_bnc(dev)) != DETECTED_NONE) break; printk(KERN_ERR "%s: no media detected\n", dev->name); - goto release_irq; + goto release_dma; } switch(result) { case DETECTED_NONE: printk(KERN_ERR "%s: no network cable attached to configured media\n", dev->name); - goto release_irq; + goto release_dma; case DETECTED_RJ45H: printk(KERN_INFO "%s: using half-duplex 10Base-T (RJ-45)\n", dev->name); break; -- cgit v0.10.2 From 6f94f709b5b1d3a9b5f1ff7d4f3534de6cde3ff6 Mon Sep 17 00:00:00 2001 From: Cesar Eduardo Barros Date: Thu, 29 May 2008 21:58:36 -0300 Subject: sc92031: remove bogus unlikely() Commit 5a0a92e67b5009a71e011658da04fb92dad8961f mentions len < ETH_ZLEN is true for ARP packets. This obviously is not unlikely. Signed-off-by: Cesar Eduardo Barros Signed-off-by: Jeff Garzik diff --git a/drivers/net/sc92031.c b/drivers/net/sc92031.c index b4b6380..61955f8 100644 --- a/drivers/net/sc92031.c +++ b/drivers/net/sc92031.c @@ -972,7 +972,7 @@ static int sc92031_start_xmit(struct sk_buff *skb, struct net_device *dev) skb_copy_and_csum_dev(skb, priv->tx_bufs + entry * TX_BUF_SIZE); len = skb->len; - if (unlikely(len < ETH_ZLEN)) { + if (len < ETH_ZLEN) { memset(priv->tx_bufs + entry * TX_BUF_SIZE + len, 0, ETH_ZLEN - len); len = ETH_ZLEN; -- cgit v0.10.2 From d399cf8c04c595d738d82d02ae2755b902a51571 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Wed, 28 May 2008 09:10:01 +0200 Subject: myri10ge: update driver version Update myri10ge version to 1.3.99-1.347. Signed-off-by: Brice Goglin Signed-off-by: Jeff Garzik diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 36be6ef..e0d76c7 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.3.2-1.287" +#define MYRI10GE_VERSION_STR "1.3.99-1.347" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); -- cgit v0.10.2 From 7eb2e25112bf920bb0a4d1cca445f3d96874c25f Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 26 May 2008 17:42:42 +1000 Subject: virtio: fix virtio_net xmit of freed skb bug If we fail to transmit a packet, we assume the queue is full and put the skb into last_xmit_skb. However, if more space frees up before we xmit it, we loop, and the result can be transmitting the same skb twice. Fix is simple: set skb to NULL if we've used it in some way, and check before sending. Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index fe7cdf2..d50f4fe 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -287,21 +287,25 @@ again: free_old_xmit_skbs(vi); /* If we has a buffer left over from last time, send it now. */ - if (vi->last_xmit_skb) { + if (unlikely(vi->last_xmit_skb)) { if (xmit_skb(vi, vi->last_xmit_skb) != 0) { /* Drop this skb: we only queue one. */ vi->dev->stats.tx_dropped++; kfree_skb(skb); + skb = NULL; goto stop_queue; } vi->last_xmit_skb = NULL; } /* Put new one in send queue and do transmit */ - __skb_queue_head(&vi->send, skb); - if (xmit_skb(vi, skb) != 0) { - vi->last_xmit_skb = skb; - goto stop_queue; + if (likely(skb)) { + __skb_queue_head(&vi->send, skb); + if (xmit_skb(vi, skb) != 0) { + vi->last_xmit_skb = skb; + skb = NULL; + goto stop_queue; + } } done: vi->svq->vq_ops->kick(vi->svq); -- cgit v0.10.2 From 11a3a1546d0adc36485c2ad4af7ab950712df6ff Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Mon, 26 May 2008 17:48:13 +1000 Subject: virtio: fix delayed xmit of packet and freeing of old packets. Because we cache the last failed-to-xmit packet, if there are no packets queued behind that one we may never send it (reproduced here as TCP stalls, "cured" by an outgoing ping). Cc: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index d50f4fe..5450eac 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -47,6 +47,9 @@ struct virtnet_info /* Number of input buffers, and max we've ever had. */ unsigned int num, max; + /* For cleaning up after transmission. */ + struct tasklet_struct tasklet; + /* Receive & send queues. */ struct sk_buff_head recv; struct sk_buff_head send; @@ -68,8 +71,13 @@ static void skb_xmit_done(struct virtqueue *svq) /* Suppress further interrupts. */ svq->vq_ops->disable_cb(svq); + /* We were waiting for more output buffers. */ netif_wake_queue(vi->dev); + + /* Make sure we re-xmit last_xmit_skb: if there are no more packets + * queued, start_xmit won't be called. */ + tasklet_schedule(&vi->tasklet); } static void receive_skb(struct net_device *dev, struct sk_buff *skb, @@ -278,6 +286,18 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); } +static void xmit_tasklet(unsigned long data) +{ + struct virtnet_info *vi = (void *)data; + + netif_tx_lock_bh(vi->dev); + if (vi->last_xmit_skb && xmit_skb(vi, vi->last_xmit_skb) == 0) { + vi->svq->vq_ops->kick(vi->svq); + vi->last_xmit_skb = NULL; + } + netif_tx_unlock_bh(vi->dev); +} + static int start_xmit(struct sk_buff *skb, struct net_device *dev) { struct virtnet_info *vi = netdev_priv(dev); @@ -432,6 +452,8 @@ static int virtnet_probe(struct virtio_device *vdev) skb_queue_head_init(&vi->recv); skb_queue_head_init(&vi->send); + tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); + err = register_netdev(dev); if (err) { pr_debug("virtio_net: registering device failed\n"); -- cgit v0.10.2 From 25f03dcf63d233c13970751253b62a678bd85ccc Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Fri, 23 May 2008 18:11:26 +0800 Subject: ucc_geth_ethtool: Fix typo Signed-off-by: Joakim Tjernlund Signed-off-by: Li Yang Signed-off-by: Jeff Garzik diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index 299b7f1..b84ffd8 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -308,7 +308,7 @@ static void uec_get_strings(struct net_device *netdev, u32 stringset, u8 *buf) buf += UEC_TX_FW_STATS_LEN * ETH_GSTRING_LEN; } if (stats_mode & UCC_GETH_STATISTICS_GATHERING_MODE_FIRMWARE_RX) - memcpy(buf, tx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN * + memcpy(buf, rx_fw_stat_gstrings, UEC_RX_FW_STATS_LEN * ETH_GSTRING_LEN); } -- cgit v0.10.2 From 08722bc4a066705e3f5fb4a5a87ce717fe9f896e Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 23 May 2008 18:11:27 +0800 Subject: ucc_geth_ethtool: Add a missing HW stats counter Signed-off-by: Joakim Tjernlund Signed-off-by: Li Yang Signed-off-by: Jeff Garzik diff --git a/drivers/net/ucc_geth_ethtool.c b/drivers/net/ucc_geth_ethtool.c index b84ffd8..f5839c4 100644 --- a/drivers/net/ucc_geth_ethtool.c +++ b/drivers/net/ucc_geth_ethtool.c @@ -73,6 +73,7 @@ static char tx_fw_stat_gstrings[][ETH_GSTRING_LEN] = { "tx-frames-ok", "tx-excessive-differ-frames", "tx-256-511-frames", + "tx-512-1023-frames", "tx-1024-1518-frames", "tx-jumbo-frames", }; -- cgit v0.10.2 From aefdbf1a3b832a580a50cf3d1dcbb717be7cbdbe Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Fri, 23 May 2008 02:00:25 +0400 Subject: atl1: fix 4G memory corruption bug When using 4+ GB RAM and SWIOTLB is active, the driver corrupts memory by writing an skb after the relevant DMA page has been unmapped. Although this doesn't happen when *not* using bounce buffers, clearing the pointer to the DMA page after unmapping it fixes the problem. http://marc.info/?t=120861317000005&r=2&w=2 Signed-off-by: Alexey Dobriyan Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 9c2394d..79325c4 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2023,6 +2023,7 @@ rrd_ok: /* Good Receive */ pci_unmap_page(adapter->pdev, buffer_info->dma, buffer_info->length, PCI_DMA_FROMDEVICE); + buffer_info->dma = 0; skb = buffer_info->skb; length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size); -- cgit v0.10.2 From 56997fa838e333cea33ab641d4aeedd23aef0eb1 Mon Sep 17 00:00:00 2001 From: Grant Grundler Date: Mon, 12 May 2008 00:37:51 -0600 Subject: [netdrvr] tulip: oops in tulip_interrupt when hibernating with swsusp/suspend2 The following patch is seems to fix the tulip suspend/resume panic: http://bugzilla.kernel.org/show_bug.cgi?id=8952#c46 My attempts at a cleaner patch failed and Pavel thinks this is OK. Original from: kernelbugs@tap.homeip.net Signed-off-by: Grant Grundler Signed-off-by: Jeff Garzik diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index f9d13fa..55670b5 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -1729,12 +1729,15 @@ static int tulip_suspend (struct pci_dev *pdev, pm_message_t state) if (!dev) return -EINVAL; - if (netif_running(dev)) - tulip_down(dev); + if (!netif_running(dev)) + goto save_state; + + tulip_down(dev); netif_device_detach(dev); free_irq(dev->irq, dev); +save_state: pci_save_state(pdev); pci_disable_device(pdev); pci_set_power_state(pdev, pci_choose_state(pdev, state)); @@ -1754,6 +1757,9 @@ static int tulip_resume(struct pci_dev *pdev) pci_set_power_state(pdev, PCI_D0); pci_restore_state(pdev); + if (!netif_running(dev)) + return 0; + if ((retval = pci_enable_device(pdev))) { printk (KERN_ERR "tulip: pci_enable_device failed in resume\n"); return retval; -- cgit v0.10.2 From cfab3bdf8292edec19492c89520b1ad11279a648 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Wed, 28 May 2008 10:18:17 +1000 Subject: [POWERPC] Add "memory" clobber to MMIO accessors Gcc might re-order MMIO accessors vs. surrounding consistent memory accesses, which is a "bad thing", and could break drivers. This fixes it by adding a "memory" clobber to the MMIO accessors, which should prevent gcc from doing that reordering. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/include/asm-powerpc/io.h b/include/asm-powerpc/io.h index e0062d7..8918948 100644 --- a/include/asm-powerpc/io.h +++ b/include/asm-powerpc/io.h @@ -100,7 +100,7 @@ static inline type name(const volatile type __iomem *addr) \ { \ type ret; \ __asm__ __volatile__("sync;" insn ";twi 0,%0,0;isync" \ - : "=r" (ret) : "r" (addr), "m" (*addr)); \ + : "=r" (ret) : "r" (addr), "m" (*addr) : "memory"); \ return ret; \ } @@ -108,8 +108,8 @@ static inline type name(const volatile type __iomem *addr) \ static inline void name(volatile type __iomem *addr, type val) \ { \ __asm__ __volatile__("sync;" insn \ - : "=m" (*addr) : "r" (val), "r" (addr)); \ - IO_SET_SYNC_FLAG(); \ + : "=m" (*addr) : "r" (val), "r" (addr) : "memory"); \ + IO_SET_SYNC_FLAG(); \ } @@ -333,7 +333,8 @@ static inline unsigned int name(unsigned int port) \ " .long 3b,5b\n" \ ".previous" \ : "=&r" (x) \ - : "r" (port + _IO_BASE)); \ + : "r" (port + _IO_BASE) \ + : "memory"); \ return x; \ } @@ -350,7 +351,8 @@ static inline void name(unsigned int val, unsigned int port) \ " .long 0b,2b\n" \ " .long 1b,2b\n" \ ".previous" \ - : : "r" (val), "r" (port + _IO_BASE)); \ + : : "r" (val), "r" (port + _IO_BASE) \ + : "memory"); \ } __do_in_asm(_rec_inb, "lbzx") -- cgit v0.10.2 From 6907fa26d8934904a4c2594034c1affd8d717cae Mon Sep 17 00:00:00 2001 From: Tony Breeds Date: Wed, 28 May 2008 10:52:19 +1000 Subject: [POWERPC] Export empty_zero_page and copy_page in arch/ppc Currently ext4 and fuse fail to link if modular: ERROR: "copy_page" [fs/fuse/fuse.ko] undefined! ERROR: "empty_zero_page" [fs/ext4/ext4dev.ko] undefined! make[3]: *** [__modpost] Error 1 make[2]: *** [modules] Error 2 make[1]: *** [sub-make] Error 2 While arch ppc exists it may as well compile, so this exports those symbols (which are already exported in arch/powerpc). Signed-off-by: Tony Breeds Signed-off-by: Paul Mackerras diff --git a/arch/ppc/kernel/ppc_ksyms.c b/arch/ppc/kernel/ppc_ksyms.c index 602c268..5d529bc 100644 --- a/arch/ppc/kernel/ppc_ksyms.c +++ b/arch/ppc/kernel/ppc_ksyms.c @@ -60,8 +60,10 @@ long long __ashrdi3(long long, int); long long __ashldi3(long long, int); long long __lshrdi3(long long, int); +EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(clear_pages); EXPORT_SYMBOL(clear_user_page); +EXPORT_SYMBOL(copy_page); EXPORT_SYMBOL(transfer_to_handler); EXPORT_SYMBOL(do_IRQ); EXPORT_SYMBOL(machine_check_exception); -- cgit v0.10.2 From 9c8b28c2ef532c2cf32b59aaa0bc07eb3b866ef7 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Sat, 31 May 2008 08:12:05 +1000 Subject: [POWERPC] Fix DMA nodes in the MPC8610 HPCD device tree The node for DMA2 in the MPC8610 HPCD device tree has the wrong compatible properties. This breaks the DMA driver and the sound driver. Signed-off-by: Timur Tabi Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 08a780d..fa9b6bb 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -251,14 +251,14 @@ dma@c300 { #address-cells = <1>; #size-cells = <1>; - compatible = "fsl,mpc8610-dma", "fsl,mpc8540-dma"; + compatible = "fsl,mpc8610-dma", "fsl,eloplus-dma"; cell-index = <1>; reg = <0xc300 0x4>; /* DMA general status register */ ranges = <0x0 0xc100 0x200>; dma-channel@0 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <0>; reg = <0x0 0x80>; interrupt-parent = <&mpic>; @@ -266,7 +266,7 @@ }; dma-channel@1 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <1>; reg = <0x80 0x80>; interrupt-parent = <&mpic>; @@ -274,7 +274,7 @@ }; dma-channel@2 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <2>; reg = <0x100 0x80>; interrupt-parent = <&mpic>; @@ -282,7 +282,7 @@ }; dma-channel@3 { compatible = "fsl,mpc8610-dma-channel", - "fsl,mpc8540-dma-channel"; + "fsl,eloplus-dma-channel"; cell-index = <3>; reg = <0x180 0x80>; interrupt-parent = <&mpic>; -- cgit v0.10.2 From 2eb74ae20e65e71c2d5bf7b8ad7d0ac5d5acf55f Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sat, 31 May 2008 15:17:25 +0800 Subject: Blackfin arch: Fix bug - set corret SSEL and IRQ to enable AD7877 on BF527 AD7877 use SSEL_2 (P9.9) and IRQ_PF8 (P9.14) on BF527 - populating JP3 to enable STAMP - disable SW11.2 to disconnect SSEL_2/PF12 from Rotary NAND - disable SW18.1 to disconnect SSEL_2 from MAX1233 touchscreen chip Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index bb6d58c..fa4f4e8 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -647,10 +647,10 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { { .modalias = "ad7877", .platform_data = &bfin_ad7877_ts_info, - .irq = IRQ_PF6, + .irq = IRQ_PF8, .max_speed_hz = 12500000, /* max spi clock (SCK) speed in HZ */ .bus_num = 0, - .chip_select = 1, + .chip_select = 2, .controller_data = &spi_ad7877_chip_info, }, #endif -- cgit v0.10.2 From b06dcee9c8d24ef903dc0d192af22b8e179eef4b Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Sat, 31 May 2008 15:35:40 +0800 Subject: Blackfin arch: Remove bad and usless code Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index 87e450f..c94f7a5 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -3,7 +3,7 @@ # obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o -obj-$(CONFIG_BFIN537_STAMP) += stamp.o led.o +obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/led.S b/arch/blackfin/mach-bf537/boards/led.S deleted file mode 100644 index 4e9ea42..0000000 --- a/arch/blackfin/mach-bf537/boards/led.S +++ /dev/null @@ -1,183 +0,0 @@ -/**************************************************** - * LED1 ---- PF6 LED2 ---- PF7 * - * LED3 ---- PF8 LED4 ---- PF9 * - * LED5 ---- PF10 LED6 ---- PF11 * - ****************************************************/ - -#include -#include - -/* All functions in this file save the registers they uses. - So there is no need to save any registers before calling them. */ - - .text; - -/* Initialize LEDs. */ - -ENTRY(_led_init) - LINK 12; - [--SP] = P0; - [--SP] = R0; - [--SP] = R1; - [--SP] = R2; - R1 = PF6|PF7|PF8|PF9|PF10|PF11 (Z); - R2 = ~R1; - - P0.H = hi(PORTF_FER); - P0.L = lo(PORTF_FER); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTFIO_DIR); - P0.L = lo(PORTFIO_DIR); - R0 = W[P0](Z); - SSYNC; - R0 = R0 | R1; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTFIO_INEN); - P0.L = lo(PORTFIO_INEN); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - R2 = [SP++]; - R1 = [SP++]; - R0 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_init, .-_led_init - -/* Set one LED on. Leave other LEDs unchanged. - It expects the LED number passed through R0. */ - -ENTRY(_led_on) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 | R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_on, .-_led_on - -/* Set one LED off. Leave other LEDs unchanged. */ - -ENTRY(_led_off) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - R1 = ~R1; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_off, .-_led_off - -/* Toggle one LED. Leave other LEDs unchanged. */ - -ENTRY(_led_toggle) - LINK 12; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R0 = W[P0](Z); - SSYNC; - R0 = R0 ^ R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle, .-_led_toggle - -/* Display the number using LEDs in binary format. */ - -ENTRY(_led_disp_num) - LINK 12; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R2 = 6(X); - R0 <<= R2; - R1 <<= R2; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R2 = W[P0](Z); - SSYNC; - R1 = ~R1; - R2 = R2 & R1; - R2 = R2 | R0; - W[P0] = R2.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_disp_num, .-_led_disp_num - -/* Toggle the number using LEDs in binary format. */ - -ENTRY(_led_toggle_num) - LINK 12; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R1 = 6(X); - R0 <<= R1; - P0.H = hi(PORTFIO); - P0.L = lo(PORTFIO); - R1 = W[P0](Z); - SSYNC; - R1 = R1 ^ R0; - W[P0] = R1.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle_num, .-_led_toggle_num - diff --git a/arch/blackfin/mach-bf548/boards/Makefile b/arch/blackfin/mach-bf548/boards/Makefile index eed161d..319ef54 100644 --- a/arch/blackfin/mach-bf548/boards/Makefile +++ b/arch/blackfin/mach-bf548/boards/Makefile @@ -2,5 +2,5 @@ # arch/blackfin/mach-bf548/boards/Makefile # -obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o led.o +obj-$(CONFIG_BFIN548_EZKIT) += ezkit.o obj-$(CONFIG_BFIN548_BLUETECHNIX_CM) += cm_bf548.o diff --git a/arch/blackfin/mach-bf548/boards/led.S b/arch/blackfin/mach-bf548/boards/led.S deleted file mode 100644 index f47daf3..0000000 --- a/arch/blackfin/mach-bf548/boards/led.S +++ /dev/null @@ -1,172 +0,0 @@ -/**************************************************** - * LED1 ---- PG6 LED2 ---- PG7 * - * LED3 ---- PG8 LED4 ---- PG9 * - * LED5 ---- PG10 LED6 ---- PG11 * - ****************************************************/ - -#include -#include - -/* All functions in this file save the registers they uses. - So there is no need to save any registers before calling them. */ - - .text; - -/* Initialize LEDs. */ - -ENTRY(_led_init) - LINK 0; - [--SP] = P0; - [--SP] = R0; - [--SP] = R1; - [--SP] = R2; - R1 = (PG6|PG7|PG8|PG9|PG10|PG11)(Z); - R2 = ~R1; - - P0.H = hi(PORTG_FER); - P0.L = lo(PORTG_FER); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - P0.H = hi(PORTG_DIR_SET); - P0.L = lo(PORTG_DIR_SET); - W[P0] = R1.L; - SSYNC; - - P0.H = hi(PORTG_INEN); - P0.L = lo(PORTG_INEN); - R0 = W[P0](Z); - SSYNC; - R0 = R0 & R2; - W[P0] = R0.L; - SSYNC; - - R2 = [SP++]; - R1 = [SP++]; - R0 = [SP++]; - P0 = [SP++]; - RTS; - .size _led_init, .-_led_init - -/* Set one LED on. Leave other LEDs unchanged. - It expects the LED number passed through R0. */ - -ENTRY(_led_on) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG_SET); - P0.L = lo(PORTG_SET); - W[P0] = R1.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_on, .-_led_on - -/* Set one LED off. Leave other LEDs unchanged. */ - -ENTRY(_led_off) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG_CLEAR); - P0.L = lo(PORTG_CLEAR); - W[P0] = R1.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_off, .-_led_off - -/* Toggle one LED. Leave other LEDs unchanged. */ - -ENTRY(_led_toggle) - LINK 0; - [--SP] = P0; - [--SP] = R1; - CALL _led_init; - R1 = 1; - R0 += 5; - R1 <<= R0; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R0 = W[P0](Z); - SSYNC; - R0 = R0 ^ R1; - W[P0] = R0.L; - SSYNC; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle, .-_led_toggle - -/* Display the number using LEDs in binary format. */ - -ENTRY(_led_disp_num) - LINK 0; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R2 = 6(X); - R0 <<= R2; - R1 <<= R2; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R2 = W[P0](Z); - SSYNC; - R1 = ~R1; - R2 = R2 & R1; - R2 = R2 | R0; - W[P0] = R2.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_disp_num, .-_led_disp_num - -/* Toggle the number using LEDs in binary format. */ - -ENTRY(_led_toggle_num) - LINK 0; - [--SP] = P0; - [--SP] = R1; - [--SP] = R2; - CALL _led_init; - R1 = 0x3f(X); - R0 = R0 & R1; - R1 = 6(X); - R0 <<= R1; - P0.H = hi(PORTG); - P0.L = lo(PORTG); - R1 = W[P0](Z); - SSYNC; - R1 = R1 ^ R0; - W[P0] = R1.L; - SSYNC; - R2 = [SP++]; - R1 = [SP++]; - P0 = [SP++]; - UNLINK; - RTS; - .size _led_toggle_num, .-_led_toggle_num - diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index a9248d8..7603383 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -105,13 +105,6 @@ extern int sram_free(const void*); extern void *sram_alloc_with_lsl(size_t, unsigned long); extern int sram_free_with_lsl(const void*); -extern void led_on(int); -extern void led_off(int); -extern void led_toggle(int); -extern void led_disp_num(int); -extern void led_toggle_num(int); -extern void init_leds(void); - extern const char bfin_board_name[]; extern unsigned long wall_jiffies; -- cgit v0.10.2 From a70ce072b3883e431575449f3e294c27235590e5 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 31 May 2008 15:47:17 +0800 Subject: Blackfin arch: update anomaly headers from toolchain trunk Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/include/asm-blackfin/mach-bf527/anomaly.h b/include/asm-blackfin/mach-bf527/anomaly.h index 735fa02..4725268 100644 --- a/include/asm-blackfin/mach-bf527/anomaly.h +++ b/include/asm-blackfin/mach-bf527/anomaly.h @@ -15,12 +15,16 @@ /* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot2 Not Supported */ #define ANOMALY_05000074 (1) +/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */ +#define ANOMALY_05000119 (1) /* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */ #define ANOMALY_05000122 (1) /* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */ #define ANOMALY_05000245 (1) /* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */ #define ANOMALY_05000265 (1) +/* Errors when SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */ +#define ANOMALY_05000312 (1) /* Incorrect Access of OTP_STATUS During otp_write() Function */ #define ANOMALY_05000328 (1) /* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */ @@ -92,7 +96,6 @@ #define ANOMALY_05000266 (0) #define ANOMALY_05000273 (0) #define ANOMALY_05000311 (0) -#define ANOMALY_05000312 (0) #define ANOMALY_05000323 (0) #define ANOMALY_05000363 (0) diff --git a/include/asm-blackfin/mach-bf533/anomaly.h b/include/asm-blackfin/mach-bf533/anomaly.h index 5a6dcc5..8f7ea11 100644 --- a/include/asm-blackfin/mach-bf533/anomaly.h +++ b/include/asm-blackfin/mach-bf533/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf533/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -176,6 +176,21 @@ #define ANOMALY_05000315 (1) /* Internal Voltage Regulator Values of 1.05V, 1.10V and 1.15V Not Allowed for LQFP Packages */ #define ANOMALY_05000319 (ANOMALY_BF531 || ANOMALY_BF532) +/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ +#define ANOMALY_05000357 (1) +/* UART Break Signal Issues */ +#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) +/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ +#define ANOMALY_05000366 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) +/* PPI Does Not Start Properly In Specific Mode */ +#define ANOMALY_05000400 (__SILICON_REVISION__ >= 5) +/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) +/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ +#define ANOMALY_05000403 (1) + /* These anomalies have been "phased" out of analog.com anomaly sheets and are * here to show running on older silicon just isn't feasible. @@ -249,20 +264,6 @@ #define ANOMALY_05000192 (__SILICON_REVISION__ < 3) /* Internal Voltage Regulator may not start up */ #define ANOMALY_05000206 (__SILICON_REVISION__ < 3) -/* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ -#define ANOMALY_05000357 (1) -/* UART Break Signal Issues */ -#define ANOMALY_05000363 (__SILICON_REVISION__ < 5) -/* PPI Underflow Error Goes Undetected in ITU-R 656 Mode */ -#define ANOMALY_05000366 (1) -/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ -#define ANOMALY_05000371 (1) -/* PPI Does Not Start Properly In Specific Mode */ -#define ANOMALY_05000400 (__SILICON_REVISION__ == 5) -/* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ == 5) -/* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ -#define ANOMALY_05000403 (1) /* Anomalies that don't exist on this proc */ #define ANOMALY_05000266 (0) diff --git a/include/asm-blackfin/mach-bf537/anomaly.h b/include/asm-blackfin/mach-bf537/anomaly.h index a6b08fa..8460ab9 100644 --- a/include/asm-blackfin/mach-bf537/anomaly.h +++ b/include/asm-blackfin/mach-bf537/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf537/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ @@ -132,8 +132,8 @@ #define ANOMALY_05000322 (1) /* Ethernet MAC MDIO Reads Do Not Meet IEEE Specification */ #define ANOMALY_05000341 (__SILICON_REVISION__ >= 3) -/* New Feature: UART Remains Enabled after UART Boot (Not Available on Older Silicon) */ -#define ANOMALY_05000350 (__SILICON_REVISION__ < 3) +/* New Feature: UART Remains Enabled after UART Boot */ +#define ANOMALY_05000350 (__SILICON_REVISION__ >= 3) /* Regulator Programming Blocked when Hibernate Wakeup Source Remains Active */ #define ANOMALY_05000355 (1) /* Serial Port (SPORT) Multichannel Transmit Failure when Channel 0 Is Disabled */ @@ -145,12 +145,10 @@ /* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ #define ANOMALY_05000371 (1) /* SSYNC Stalls Processor when Executed from Non-Cacheable Memory */ -#define ANOMALY_05000402 (__SILICON_REVISION__ >= 3) +#define ANOMALY_05000402 (__SILICON_REVISION__ >= 5) /* Level-Sensitive External GPIO Wakeups May Cause Indefinite Stall */ #define ANOMALY_05000403 (1) - - /* Anomalies that don't exist on this proc */ #define ANOMALY_05000125 (0) #define ANOMALY_05000158 (0) diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h index 49d3ceb..3ad5965 100644 --- a/include/asm-blackfin/mach-bf548/anomaly.h +++ b/include/asm-blackfin/mach-bf548/anomaly.h @@ -75,6 +75,8 @@ #define ANOMALY_05000365 (1) /* Addressing Conflict between Boot ROM and Asynchronous Memory */ #define ANOMALY_05000369 (1) +/* Possible RETS Register Corruption when Subroutine Is under 5 Cycles in Duration */ +#define ANOMALY_05000371 (1) /* Mobile DDR Operation Not Functional */ #define ANOMALY_05000377 (1) /* Security/Authentication Speedpath Causes Authentication To Fail To Initiate */ diff --git a/include/asm-blackfin/mach-bf561/anomaly.h b/include/asm-blackfin/mach-bf561/anomaly.h index 82157ca..5c5d7d7 100644 --- a/include/asm-blackfin/mach-bf561/anomaly.h +++ b/include/asm-blackfin/mach-bf561/anomaly.h @@ -2,7 +2,7 @@ * File: include/asm-blackfin/mach-bf561/anomaly.h * Bugs: Enter bugs at http://blackfin.uclinux.org/ * - * Copyright (C) 2004-2007 Analog Devices Inc. + * Copyright (C) 2004-2008 Analog Devices Inc. * Licensed under the GPL-2 or later. */ -- cgit v0.10.2 From a4ed1e41a734d77c9a83a88a8736e19b68e6a2a0 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Sat, 31 May 2008 16:10:04 +0800 Subject: 8250 Serial Driver: revert extra IRQ flag definition patch As Russell pointed out, original patch will break some serial configurations because of the dependency of the header file. Revert it first and try to find out other solution later Cc: Javier Herrero Cc: Alan Cox Cc: Russell King Signed-off-by: Bryan Wu diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index 1400ea6..1bc00b7 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -43,7 +43,6 @@ #include #include -#include #include "8250.h" @@ -93,6 +92,7 @@ static unsigned int nr_uarts = CONFIG_SERIAL_8250_RUNTIME_UARTS; */ #define CONFIG_HUB6 1 +#include /* * SERIAL_PORT_DFNS tells us about built-in ports that have no * standard enumeration mechanism. Platforms that can find all @@ -1547,8 +1547,6 @@ static int serial_link_irq_chain(struct uart_8250_port *up) i->head = &up->list; spin_unlock_irq(&i->lock); - irq_flags |= SERIAL_EXTRA_IRQ_FLAGS; - ret = request_irq(up->port.irq, serial8250_interrupt, irq_flags, "serial", i); if (ret < 0) diff --git a/drivers/serial/8250.h b/drivers/serial/8250.h index a10a40c..91bd28f 100644 --- a/drivers/serial/8250.h +++ b/drivers/serial/8250.h @@ -78,8 +78,3 @@ struct serial8250_config { #else #define ALPHA_KLUDGE_MCR 0 #endif - -#ifndef SERIAL_EXTRA_IRQ_FLAGS -#define SERIAL_EXTRA_IRQ_FLAGS 0 -#endif - -- cgit v0.10.2 From 96d97f262aa6120f8dd8e8e9c7a0b0677de7e29e Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Sat, 31 May 2008 22:28:40 +0200 Subject: kbuild: fix $(src) assignmnet with external modules When we introduced support for KBUILD_EXTRA_SYMBOLS we started to include the externam module's kbuild file when doing the final modpost step. As external modules often do: ccflags-y := -I$(src) We had problems because $(src) was unassinged and gcc then used the next parameter for -I resulting in strange build failures. Fix is to assign $(src) and $(obj) when building external modules. This fixes: http://bugzilla.kernel.org/show_bug.cgi?id=10798 Signed-off-by: Sam Ravnborg Cc: Tvrtko Cc: Andrea Arcangeli Cc: "Rafael J. Wysocki" diff --git a/scripts/Makefile.modpost b/scripts/Makefile.modpost index a098a04..17092d6 100644 --- a/scripts/Makefile.modpost +++ b/scripts/Makefile.modpost @@ -43,7 +43,13 @@ _modpost: __modpost include include/config/auto.conf include scripts/Kbuild.include +# When building external modules load the Kbuild file to retreive EXTRA_SYMBOLS info ifneq ($(KBUILD_EXTMOD),) + +# set src + obj - they may be used when building the .mod.c file +obj := $(KBUILD_EXTMOD) +src := $(obj) + # Include the module's Makefile to find KBUILD_EXTRA_SYMBOLS include $(if $(wildcard $(KBUILD_EXTMOD)/Kbuild), \ $(KBUILD_EXTMOD)/Kbuild, $(KBUILD_EXTMOD)/Makefile) -- cgit v0.10.2 From ca05a99a54db1db5bca72eccb5866d2a86f8517f Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Tue, 27 May 2008 22:05:17 -0700 Subject: capabilities: remain source compatible with 32-bit raw legacy capability support. Source code out there hard-codes a notion of what the _LINUX_CAPABILITY_VERSION #define means in terms of the semantics of the raw capability system calls capget() and capset(). Its unfortunate, but true. Since the confusing header file has been in a released kernel, there is software that is erroneously using 64-bit capabilities with the semantics of 32-bit compatibilities. These recently compiled programs may suffer corruption of their memory when sys_getcap() overwrites more memory than they are coded to expect, and the raising of added capabilities when using sys_capset(). As such, this patch does a number of things to clean up the situation for all. It 1. forces the _LINUX_CAPABILITY_VERSION define to always retain its legacy value. 2. adopts a new #define strategy for the kernel's internal implementation of the preferred magic. 3. deprecates v2 capability magic in favor of a new (v3) magic number. The functionality of v3 is entirely equivalent to v2, the only difference being that the v2 magic causes the kernel to log a "deprecated" warning so the admin can find applications that may be using v2 inappropriately. [User space code continues to be encouraged to use the libcap API which protects the application from details like this. libcap-2.10 is the first to support v3 capabilities.] Fixes issue reported in https://bugzilla.redhat.com/show_bug.cgi?id=447518. Thanks to Bojan Smojver for the report. [akpm@linux-foundation.org: s/depreciate/deprecate/g] [akpm@linux-foundation.org: be robust about put_user size] [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andrew G. Morgan Cc: Serge E. Hallyn Cc: Bojan Smojver Cc: stable@kernel.org Signed-off-by: Andrew Morton Signed-off-by: Chris Wright diff --git a/fs/proc/array.c b/fs/proc/array.c index 9e3b8c3..797d775 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -288,7 +288,7 @@ static void render_cap_t(struct seq_file *m, const char *header, seq_printf(m, "%s", header); CAP_FOR_EACH_U32(__capi) { seq_printf(m, "%08x", - a->cap[(_LINUX_CAPABILITY_U32S-1) - __capi]); + a->cap[(_KERNEL_CAPABILITY_U32S-1) - __capi]); } seq_printf(m, "\n"); } diff --git a/include/linux/capability.h b/include/linux/capability.h index f4ea0dd..fa830f8 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -31,11 +31,11 @@ struct task_struct; #define _LINUX_CAPABILITY_VERSION_1 0x19980330 #define _LINUX_CAPABILITY_U32S_1 1 -#define _LINUX_CAPABILITY_VERSION_2 0x20071026 +#define _LINUX_CAPABILITY_VERSION_2 0x20071026 /* deprecated - use v3 */ #define _LINUX_CAPABILITY_U32S_2 2 -#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_2 -#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_2 +#define _LINUX_CAPABILITY_VERSION_3 0x20080522 +#define _LINUX_CAPABILITY_U32S_3 2 typedef struct __user_cap_header_struct { __u32 version; @@ -77,10 +77,23 @@ struct vfs_cap_data { } data[VFS_CAP_U32]; }; -#ifdef __KERNEL__ +#ifndef __KERNEL__ + +/* + * Backwardly compatible definition for source code - trapped in a + * 32-bit world. If you find you need this, please consider using + * libcap to untrap yourself... + */ +#define _LINUX_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_1 +#define _LINUX_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_1 + +#else + +#define _KERNEL_CAPABILITY_VERSION _LINUX_CAPABILITY_VERSION_3 +#define _KERNEL_CAPABILITY_U32S _LINUX_CAPABILITY_U32S_3 typedef struct kernel_cap_struct { - __u32 cap[_LINUX_CAPABILITY_U32S]; + __u32 cap[_KERNEL_CAPABILITY_U32S]; } kernel_cap_t; #define _USER_CAP_HEADER_SIZE (sizeof(struct __user_cap_header_struct)) @@ -351,7 +364,7 @@ typedef struct kernel_cap_struct { */ #define CAP_FOR_EACH_U32(__capi) \ - for (__capi = 0; __capi < _LINUX_CAPABILITY_U32S; ++__capi) + for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi) # define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \ | CAP_TO_MASK(CAP_DAC_OVERRIDE) \ @@ -361,7 +374,7 @@ typedef struct kernel_cap_struct { # define CAP_FS_MASK_B1 (CAP_TO_MASK(CAP_MAC_OVERRIDE)) -#if _LINUX_CAPABILITY_U32S != 2 +#if _KERNEL_CAPABILITY_U32S != 2 # error Fix up hand-coded capability macro initializers #else /* HAND-CODED capability initializers */ @@ -372,7 +385,7 @@ typedef struct kernel_cap_struct { # define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0|CAP_TO_MASK(CAP_SYS_RESOURCE), \ CAP_FS_MASK_B1 } }) -#endif /* _LINUX_CAPABILITY_U32S != 2 */ +#endif /* _KERNEL_CAPABILITY_U32S != 2 */ #define CAP_INIT_INH_SET CAP_EMPTY_SET diff --git a/kernel/capability.c b/kernel/capability.c index 39e8193..cfbe442 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -53,6 +53,69 @@ static void warn_legacy_capability_use(void) } /* + * Version 2 capabilities worked fine, but the linux/capability.h file + * that accompanied their introduction encouraged their use without + * the necessary user-space source code changes. As such, we have + * created a version 3 with equivalent functionality to version 2, but + * with a header change to protect legacy source code from using + * version 2 when it wanted to use version 1. If your system has code + * that trips the following warning, it is using version 2 specific + * capabilities and may be doing so insecurely. + * + * The remedy is to either upgrade your version of libcap (to 2.10+, + * if the application is linked against it), or recompile your + * application with modern kernel headers and this warning will go + * away. + */ + +static void warn_deprecated_v2(void) +{ + static int warned; + + if (!warned) { + char name[sizeof(current->comm)]; + + printk(KERN_INFO "warning: `%s' uses deprecated v2" + " capabilities in a way that may be insecure.\n", + get_task_comm(name, current)); + warned = 1; + } +} + +/* + * Version check. Return the number of u32s in each capability flag + * array, or a negative value on error. + */ +static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy) +{ + __u32 version; + + if (get_user(version, &header->version)) + return -EFAULT; + + switch (version) { + case _LINUX_CAPABILITY_VERSION_1: + warn_legacy_capability_use(); + *tocopy = _LINUX_CAPABILITY_U32S_1; + break; + case _LINUX_CAPABILITY_VERSION_2: + warn_deprecated_v2(); + /* + * fall through - v3 is otherwise equivalent to v2. + */ + case _LINUX_CAPABILITY_VERSION_3: + *tocopy = _LINUX_CAPABILITY_U32S_3; + break; + default: + if (put_user((u32)_KERNEL_CAPABILITY_VERSION, &header->version)) + return -EFAULT; + return -EINVAL; + } + + return 0; +} + +/* * For sys_getproccap() and sys_setproccap(), any of the three * capability set pointers may be NULL -- indicating that that set is * uninteresting and/or not to be changed. @@ -71,27 +134,13 @@ asmlinkage long sys_capget(cap_user_header_t header, cap_user_data_t dataptr) { int ret = 0; pid_t pid; - __u32 version; struct task_struct *target; unsigned tocopy; kernel_cap_t pE, pI, pP; - if (get_user(version, &header->version)) - return -EFAULT; - - switch (version) { - case _LINUX_CAPABILITY_VERSION_1: - warn_legacy_capability_use(); - tocopy = _LINUX_CAPABILITY_U32S_1; - break; - case _LINUX_CAPABILITY_VERSION_2: - tocopy = _LINUX_CAPABILITY_U32S_2; - break; - default: - if (put_user(_LINUX_CAPABILITY_VERSION, &header->version)) - return -EFAULT; - return -EINVAL; - } + ret = cap_validate_magic(header, &tocopy); + if (ret != 0) + return ret; if (get_user(pid, &header->pid)) return -EFAULT; @@ -118,7 +167,7 @@ out: spin_unlock(&task_capability_lock); if (!ret) { - struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S]; + struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S]; unsigned i; for (i = 0; i < tocopy; i++) { @@ -128,7 +177,7 @@ out: } /* - * Note, in the case, tocopy < _LINUX_CAPABILITY_U32S, + * Note, in the case, tocopy < _KERNEL_CAPABILITY_U32S, * we silently drop the upper capabilities here. This * has the effect of making older libcap * implementations implicitly drop upper capability @@ -240,30 +289,16 @@ static inline int cap_set_all(kernel_cap_t *effective, */ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data) { - struct __user_cap_data_struct kdata[_LINUX_CAPABILITY_U32S]; + struct __user_cap_data_struct kdata[_KERNEL_CAPABILITY_U32S]; unsigned i, tocopy; kernel_cap_t inheritable, permitted, effective; - __u32 version; struct task_struct *target; int ret; pid_t pid; - if (get_user(version, &header->version)) - return -EFAULT; - - switch (version) { - case _LINUX_CAPABILITY_VERSION_1: - warn_legacy_capability_use(); - tocopy = _LINUX_CAPABILITY_U32S_1; - break; - case _LINUX_CAPABILITY_VERSION_2: - tocopy = _LINUX_CAPABILITY_U32S_2; - break; - default: - if (put_user(_LINUX_CAPABILITY_VERSION, &header->version)) - return -EFAULT; - return -EINVAL; - } + ret = cap_validate_magic(header, &tocopy); + if (ret != 0) + return ret; if (get_user(pid, &header->pid)) return -EFAULT; @@ -281,7 +316,7 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data) permitted.cap[i] = kdata[i].permitted; inheritable.cap[i] = kdata[i].inheritable; } - while (i < _LINUX_CAPABILITY_U32S) { + while (i < _KERNEL_CAPABILITY_U32S) { effective.cap[i] = 0; permitted.cap[i] = 0; inheritable.cap[i] = 0; -- cgit v0.10.2 From ee48a75c95145bf6af3be329cd7cbbca2ec89a2a Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 1 Jun 2008 11:19:33 +0100 Subject: [ARM] fix AT91 include loops AT91 has one include loop in its header files: include/asm-arm/io.h <- include/asm-arm/arch-at91/io.h <- include/asm-arm/io.h Circular include dependencies are dangerous since they can result in inconsistent definitions being provided to other code, especially if '#ifndef' constructs are used. Solve this by removing the offending includes. Built tested using my AT91 configuration. Acked-by: Andrew Victor Signed-off-by: Russell King diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h index 80073fd..f8beaa2 100644 --- a/include/asm-arm/arch-at91/io.h +++ b/include/asm-arm/arch-at91/io.h @@ -21,8 +21,6 @@ #ifndef __ASM_ARCH_IO_H #define __ASM_ARCH_IO_H -#include - #define IO_SPACE_LIMIT 0xFFFFFFFF #define __io(a) ((void __iomem *)(a)) -- cgit v0.10.2 From 759e9408ad2e7f2115ce8341854be982e0186a8c Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Sun, 25 May 2008 12:35:38 +0100 Subject: [ARM] 5060/1: remove unnecessary include of asm/io.h Remove unnecessary include of asm/io.h. Signed-off-by: Greg Ungerer Signed-off-by: Russell King diff --git a/include/asm-arm/pgtable-nommu.h b/include/asm-arm/pgtable-nommu.h index 2e5868b..386fcc1 100644 --- a/include/asm-arm/pgtable-nommu.h +++ b/include/asm-arm/pgtable-nommu.h @@ -16,7 +16,6 @@ #include #include #include -#include /* * Trivial page table functions. -- cgit v0.10.2 From 6d2545738a7c6ad1831d84ecc6483ea21c327bf4 Mon Sep 17 00:00:00 2001 From: eric miao Date: Mon, 26 May 2008 03:23:14 +0100 Subject: [ARM] 5062/1: pxa: remove unused definition of CONFIG_ARCH_COTULLA_IDP Signed-off-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/head-xscale.S b/arch/arm/boot/compressed/head-xscale.S index 67ea99e..dd3fbd6 100644 --- a/arch/arm/boot/compressed/head-xscale.S +++ b/arch/arm/boot/compressed/head-xscale.S @@ -33,10 +33,6 @@ __XScale_start: bic r0, r0, #0x1000 @ clear Icache mcr p15, 0, r0, c1, c0, 0 -#ifdef CONFIG_ARCH_COTULLA_IDP - mov r7, #MACH_TYPE_COTULLA_IDP -#endif - #ifdef CONFIG_ARCH_IXP2000 mov r1, #-1 mov r0, #0xd6000000 -- cgit v0.10.2 From 2beb0e2893b900fa5fb07ccf73a976c06a93b764 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 30 May 2008 01:04:49 +0300 Subject: sh/kernel/cpu/irq/intc-sh5.c build fix This patch fixes the following build error caused by commit a1dc4b59fa4af97ae68ee214d4d72bbd7c7ec1dc (sh: intc_sh5 depends on cayman board for IRQ priority table.): <-- snip --> ... CC arch/sh/kernel/cpu/irq/intc-sh5.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c: In function 'plat_irq_setup': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/sh/kernel/cpu/irq/intc-sh5.c:257: error: expected declaration or statement at end of input make[4]: *** [arch/sh/kernel/cpu/irq/intc-sh5.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/irq/intc-sh5.c b/arch/sh/kernel/cpu/irq/intc-sh5.c index de45c6a..79baa47 100644 --- a/arch/sh/kernel/cpu/irq/intc-sh5.c +++ b/arch/sh/kernel/cpu/irq/intc-sh5.c @@ -242,6 +242,7 @@ void __init plat_irq_setup(void) reg += 8; } } + } #endif /* -- cgit v0.10.2 From 1f9d29493992ddd6af6b3e313a603770f29c0408 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 28 May 2008 16:38:17 -0700 Subject: sh: module.c use kernel unaligned helpers Replace the COPY_UNALIGNED_WORD helper. Signed-off-by: Harvey Harrison Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/module.c b/arch/sh/kernel/module.c index b3d0a03..5482e65 100644 --- a/arch/sh/kernel/module.c +++ b/arch/sh/kernel/module.c @@ -30,6 +30,7 @@ #include #include #include +#include void *module_alloc(unsigned long size) { @@ -56,34 +57,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr, return 0; } -#ifdef CONFIG_SUPERH32 -#define COPY_UNALIGNED_WORD(sw, tw, align) \ -{ \ - void *__s = &(sw), *__t = &(tw); \ - unsigned short *__s2 = __s, *__t2 = __t; \ - unsigned char *__s1 = __s, *__t1 = __t; \ - switch ((align)) \ - { \ - case 0: \ - *(unsigned long *) __t = *(unsigned long *) __s; \ - break; \ - case 2: \ - *__t2++ = *__s2++; \ - *__t2 = *__s2; \ - break; \ - default: \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1++ = *__s1++; \ - *__t1 = *__s1; \ - break; \ - } \ -} -#else -/* One thing SHmedia doesn't screw up! */ -#define COPY_UNALIGNED_WORD(sw, tw, align) { (tw) = (sw); } -#endif - int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, @@ -96,7 +69,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, Elf32_Addr relocation; uint32_t *location; uint32_t value; - int align; pr_debug("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); @@ -109,7 +81,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, sym = (Elf32_Sym *)sechdrs[symindex].sh_addr + ELF32_R_SYM(rel[i].r_info); relocation = sym->st_value + rel[i].r_addend; - align = (int)location & 3; #ifdef CONFIG_SUPERH64 /* For text addresses, bit2 of the st_other field indicates @@ -122,15 +93,15 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, switch (ELF32_R_TYPE(rel[i].r_info)) { case R_SH_DIR32: - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_REL32: relocation = (relocation - (Elf32_Addr) location); - COPY_UNALIGNED_WORD (*location, value, align); + value = get_unaligned(location); value += relocation; - COPY_UNALIGNED_WORD (value, *location, align); + put_unaligned(value, location); break; case R_SH_IMM_LOW16: *location = (*location & ~0x3fffc00) | -- cgit v0.10.2 From d02d6be5d52a98be32c93d2ea7a0068991774a20 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 2 Jun 2008 12:40:14 +0900 Subject: sh: fix miscompilation of ip_fast_csum with gcc >= 4.3 As noted by Matthew Wilcox: Kyle McMartin just tracked down a bug on parisc to a missing "memory" clobber in the inline assembly implementation of ip_fast_csum. The FRV, SH and Xtensa ports are also missing a memory clobber, so I thought it would be polite to let you know. The bug manifests as dropped network packets (obviously they have the wrong checksum). It started appearing for parisc with GCC 4.3. The GCC manual says: If your assembler instructions access memory in an unpredictable fashion, add `memory' to the list of clobbered registers. This will cause GCC to not keep memory values cached in registers across the assembler instruction and not optimize stores or loads to that memory. I see that FRV has a 400 byte memory output which may prevent this problem from appearing, but SH and Xtensa have nothing to prevent this bug. Hope this saves you a few days of debugging. Signed-off-by: Paul Mundt diff --git a/include/asm-sh/checksum_32.h b/include/asm-sh/checksum_32.h index 4bc8357..14b7ac2 100644 --- a/include/asm-sh/checksum_32.h +++ b/include/asm-sh/checksum_32.h @@ -109,7 +109,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) will assume they contain their original values. */ : "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (__dummy0), "=&z" (__dummy1) : "1" (iph), "2" (ihl) - : "t"); + : "t", "memory"); return csum_fold(sum); } -- cgit v0.10.2 From 1f8404ea5fd8c408d0a7c12a88091dffb7b6768b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 2 Jun 2008 13:48:59 +0900 Subject: sh: Disable 4KSTACKS on nommu. 4k stacks on nommu ends up blowing up with all sorts of interesting slab corruption. Disable this by default unless BROKEN is also enabled. Signed-off-by: Paul Mundt diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug index 0d2ef1e..0f45498 100644 --- a/arch/sh/Kconfig.debug +++ b/arch/sh/Kconfig.debug @@ -81,7 +81,7 @@ config DEBUG_STACK_USAGE config 4KSTACKS bool "Use 4Kb for kernel stacks instead of 8Kb" - depends on DEBUG_KERNEL + depends on DEBUG_KERNEL && (MMU || BROKEN) help If you say Y here the kernel will use a 4Kb stacksize for the kernel stack attached to each process/thread. This facilitates -- cgit v0.10.2 From c4913c7b71abc79b008a3c118628cfb59bdb0efc Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 2 Jun 2008 15:46:51 +1000 Subject: [CRYPTO] cts: Init SG tables Steps to reproduce: modprobe tcrypt # with CONFIG_DEBUG_SG=y testing cts(cbc(aes)) encryption test 1 (128 bit key): ------------[ cut here ]------------ kernel BUG at include/linux/scatterlist.h:65! invalid opcode: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC CPU 0 Modules linked in: tea xts twofish twofish_common tcrypt(+) [maaaany] Pid: 16151, comm: modprobe Not tainted 2.6.26-rc4-fat #7 RIP: 0010:[] [] :cts:cts_cbc_encrypt+0x151/0x355 RSP: 0018:ffff81016f497a88 EFLAGS: 00010286 RAX: ffffe20009535d58 RBX: ffff81016f497af0 RCX: 0000000087654321 RDX: ffff8100010d4f28 RSI: ffff81016f497ee8 RDI: ffff81016f497ac0 RBP: ffff81016f497c38 R08: 0000000000000000 R09: 0000000000000011 R10: ffffffff00000008 R11: ffff8100010d4f28 R12: ffff81016f497ac0 R13: ffff81016f497b30 R14: 0000000000000010 R15: 0000000000000010 FS: 00007fac6fa276f0(0000) GS:ffffffff8060e000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007f12ca7cc000 CR3: 000000016f441000 CR4: 00000000000026e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff4ff0 DR7: 0000000000000400 Process modprobe (pid: 16151, threadinfo ffff81016f496000, task ffff8101755b4ae0) Stack: 0000000000000001 ffff81016f496000 ffffffff80719f78 0000000000000001 0000000000000001 ffffffff8020c87c ffff81016f99c918 20646c756f772049 65687420656b696c 0000000000000020 0000000000000000 0000000033341102 Call Trace: [] ? restore_args+0x0/0x30 [] ? :aes_generic:crypto_aes_expand_key+0x311/0x369 [] ? check_object+0x15a/0x213 [] ? init_object+0x6e/0x76 [] ? __slab_free+0xfc/0x371 [] :cts:crypto_cts_encrypt+0xbb/0xca [] ? :crypto_blkcipher:setkey+0xc7/0xec [] :crypto_blkcipher:async_encrypt+0x38/0x3a [] :tcrypt:test_cipher+0x261/0x7c6 [] :tcrypt:tcrypt_mod_init+0x9df/0x1b30 [] sys_init_module+0x9e/0x1b2 [] system_call_after_swapgs+0x8a/0x8f Code: 45 c0 e8 aa 24 63 df 48 c1 e8 0c 48 b9 00 00 00 00 00 e2 ff ff 48 8b 55 88 48 6b c0 68 48 01 c8 b9 21 43 65 87 48 39 4d 80 74 04 <0f> 0b eb fe f6 c2 01 74 04 0f 0b eb fe 83 e2 03 4c 89 ef 44 89 RIP [] :cts:cts_cbc_encrypt+0x151/0x355 RSP ---[ end trace e8bahiarjand37fd ]--- Signed-off-by: Alexey Dobriyan Signed-off-by: Herbert Xu diff --git a/crypto/cts.c b/crypto/cts.c index c4e70bf..ccf9c5d 100644 --- a/crypto/cts.c +++ b/crypto/cts.c @@ -89,6 +89,9 @@ static int cts_cbc_encrypt(struct crypto_cts_ctx *ctx, if (lastn < 0) return -EINVAL; + sg_init_table(sgsrc, 1); + sg_init_table(sgdst, 1); + memset(s, 0, sizeof(s)); scatterwalk_map_and_copy(s, src, offset, nbytes, 0); @@ -172,6 +175,9 @@ static int cts_cbc_decrypt(struct crypto_cts_ctx *ctx, if (lastn < 0) return -EINVAL; + sg_init_table(sgsrc, 1); + sg_init_table(sgdst, 1); + scatterwalk_map_and_copy(s, src, offset, nbytes, 0); lcldesc.tfm = ctx->child; -- cgit v0.10.2 From 75b19b790bec3ebffbf513405b27500e22270cbc Mon Sep 17 00:00:00 2001 From: Bertram Felgenhauer Date: Fri, 30 May 2008 03:20:05 +0200 Subject: pci, x86: add workaround for bug in ASUS A7V600 BIOS (rev 1005) This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586, which it is not. Without this patch, I get the following warning while booting, among others, | PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 | ------------[ cut here ]------------ | WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60() | Modules linked in: | Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99 #1 | [] warn_on_slowpath+0x54/0x70 | [] ? vt_console_print+0x210/0x2b0 | [] ? vt_console_print+0x0/0x2b0 | [] ? __call_console_drivers+0x43/0x60 | [] ? _call_console_drivers+0x52/0x80 | [] ? release_console_sem+0x1c9/0x200 | [] ? raw_pci_read+0x41/0x70 | [] ? pci_read+0x2f/0x40 | [] pirq_via586_get+0x4a/0x60 | [] ? pirq_via586_get+0x0/0x60 | [] pcibios_lookup_irq+0x15d/0x430 | [] pcibios_irq_init+0x17a/0x3e0 | [] ? kernel_init+0x0/0x250 | [] kernel_init+0x73/0x250 | [] ? pcibios_irq_init+0x0/0x3e0 | [] ? schedule_tail+0x10/0x40 | [] ? ret_from_fork+0x6/0x1c | [] ? kernel_init+0x0/0x250 | [] ? kernel_init+0x0/0x250 | [] kernel_thread_helper+0x7/0x1c | ======================= | ---[ end trace 4eaa2a86a8e2da22 ]--- and IRQ trouble later, | irq 10: nobody cared (try booting with the "irqpoll" option) Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called at all; adding this workaround to via_router_probe() fixes the problem for me. Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll never understand why. Signed-off-by: Bertram Felgenhauer Acked-by: Alan Cox Signed-off-by: Ingo Molnar diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 0908fca..ca8df9c 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -621,6 +621,13 @@ static __init int via_router_probe(struct irq_router *r, */ device = PCI_DEVICE_ID_VIA_8235; break; + case PCI_DEVICE_ID_VIA_8237: + /** + * Asus a7v600 bios wrongly reports 8237 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8237; + break; } } -- cgit v0.10.2 From db9f600b96c16bb3c7f094e294fbdd370226ad86 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Wed, 28 May 2008 10:31:25 +0200 Subject: x86: pci-dma.c: use __GFP_NO_OOM instead of __GFP_NORETRY On Wed, 2008-05-28 at 04:47 +0200, Andi Kleen wrote: > > So... why not just remove the setting of __GFP_NORETRY? Why is it > > wrong to oom-kill things in this case? > > When the 16MB zone overflows (which can be common in some workloads) > calling the OOM killer is pretty useless because it has barely any > real user data [only exception would be the "only 16MB" case Alan > mentioned]. Killing random processes in this case is bad. > > I think for 16MB __GFP_NORETRY is ok because there should be > nothing freeable in there so looping is useless. Only exception would be the > "only 16MB total" case again but I'm not sure 2.6 supports that at all > on x86. > > On the other hand d_a_c() does more allocations than just 16MB, especially > on 64bit and the other zones need different strategies. Okay, so how about this then ? Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index c5ef1af..069e843 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -397,9 +397,6 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dev->dma_mask == NULL) return NULL; - /* Don't invoke OOM killer */ - gfp |= __GFP_NORETRY; - #ifdef CONFIG_X86_64 /* Why <=? Even when the mask is smaller than 4GB it is often larger than 16MB and in this case we have a chance of @@ -410,7 +407,9 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, #endif again: - page = dma_alloc_pages(dev, gfp, get_order(size)); + /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ + page = dma_alloc_pages(dev, + (gfp & GFP_DMA) ? gfp | __GFP_NORETRY : gfp, get_order(size)); if (page == NULL) return NULL; -- cgit v0.10.2 From f529626a86d61897862aa1bbbb4537773209238e Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 29 May 2008 00:30:21 -0700 Subject: suspend-vs-iommu: prevent suspend if we could not resume iommu/gart support misses suspend/resume code, which can do bad stuff, including memory corruption on resume. Prevent system suspend in case we would be unable to resume. Signed-off-by: Pavel Machek Tested-by: Patrick Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d..aa8ec92 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -548,6 +549,28 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static int gart_resume(struct sys_device *dev) +{ + return 0; +} + +static int gart_suspend(struct sys_device *dev, pm_message_t state) +{ + return -EINVAL; +} + +static struct sysdev_class gart_sysdev_class = { + .name = "gart", + .suspend = gart_suspend, + .resume = gart_resume, + +}; + +static struct sys_device device_gart = { + .id = 0, + .cls = &gart_sysdev_class, +}; + /* * Private Northbridge GATT initialization in case we cannot use the * AGP driver for some reason. @@ -558,7 +581,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) unsigned aper_base, new_aper_base; struct pci_dev *dev; void *gatt; - int i; + int i, error; printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); aper_size = aper_base = info->aper_size = 0; @@ -606,6 +629,12 @@ static __init int init_k8_gatt(struct agp_kern_info *info) pci_write_config_dword(dev, 0x90, ctl); } + + error = sysdev_class_register(&gart_sysdev_class); + if (!error) + error = sysdev_register(&device_gart); + if (error) + panic("Could not register gart_sysdev -- would corrupt data on next suspend"); flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", -- cgit v0.10.2 From b095723526cb80494bd5a13de0e5078f8846866a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Jun 2008 12:58:24 +0100 Subject: [ARM] 5065/2: CM-X270: Fix DM9000 IRQ flags initialisation Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/cm-x270.c b/arch/arm/mach-pxa/cm-x270.c index 6d4416a..f5851d1 100644 --- a/arch/arm/mach-pxa/cm-x270.c +++ b/arch/arm/mach-pxa/cm-x270.c @@ -59,7 +59,7 @@ static struct resource cmx270_dm9k_resource[] = { [2] = { .start = CMX270_ETHIRQ, .end = CMX270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; -- cgit v0.10.2 From 31ab3ffb2b20cda79684a0b3a4265fd7170cdacc Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 2 Jun 2008 12:58:23 +0100 Subject: [ARM] 5066/2: EM-X270: Fix DM9000 IRQ flags initialisation Add the IORESOURCE_IRQ_HIGHEDGE to the DM9000 IRQ resource to stop the driver itself complaining it was not given any flags to use. Signed-off-by: Mike Rapoport Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index edc4f07..9c57700 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -50,7 +50,7 @@ static struct resource em_x270_dm9k_resource[] = { [2] = { .start = EM_X270_ETHIRQ, .end = EM_X270_ETHIRQ, - .flags = IORESOURCE_IRQ, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, } }; -- cgit v0.10.2 From 106f62701fe79fd5c251e5d3e182516344882962 Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Wed, 28 May 2008 18:37:14 +0100 Subject: [ARM] 5068/1: PXA2xx Additional gpio definitions Some additional alternate gpio definitions relating to FFUART and USB on the pxa27x. These are used on the xbow imote2 platform. Signed-off-by: Jonathan Cameron Signed-off-by: Russell King diff --git a/include/asm-arm/arch-pxa/pxa2xx-gpio.h b/include/asm-arm/arch-pxa/pxa2xx-gpio.h index 763313c..b81cd63 100644 --- a/include/asm-arm/arch-pxa/pxa2xx-gpio.h +++ b/include/asm-arm/arch-pxa/pxa2xx-gpio.h @@ -134,7 +134,11 @@ #define GPIO93_CIF_DD_6 93 /* Camera data pin 6 */ #define GPIO94_CIF_DD_5 94 /* Camera data pin 5 */ #define GPIO95_CIF_DD_4 95 /* Camera data pin 4 */ +#define GPIO96_FFRXD 96 /* FFUART recieve */ +#define GPIO98_FFRTS 98 /* FFUART request to send */ #define GPIO98_CIF_DD_0 98 /* Camera data pin 0 */ +#define GPIO99_FFTXD 99 /* FFUART transmit data */ +#define GPIO100_FFCTS 100 /* FFUART Clear to send */ #define GPIO102_nPCE_1 102 /* PCMCIA (PXA27x) */ #define GPIO103_CIF_DD_3 103 /* Camera data pin 3 */ #define GPIO104_CIF_DD_2 104 /* Camera data pin 2 */ @@ -316,6 +320,8 @@ #define GPIO85_nPCE_1_MD (85 | GPIO_ALT_FN_1_OUT) #define GPIO85_CIF_LV_MD (85 | GPIO_ALT_FN_3_IN) #define GPIO86_nPCE_1_MD (86 | GPIO_ALT_FN_1_OUT) +#define GPIO88_USBH1_PWR_MD (88 | GPIO_ALT_FN_1_IN) +#define GPIO89_USBH1_PEN_MD (89 | GPIO_ALT_FN_2_OUT) #define GPIO90_CIF_DD_4_MD (90 | GPIO_ALT_FN_3_IN) #define GPIO91_CIF_DD_5_MD (91 | GPIO_ALT_FN_3_IN) #define GPIO92_MMCDAT0_MD (92 | GPIO_ALT_FN_1_OUT) @@ -324,8 +330,11 @@ #define GPIO95_CIF_DD_4_MD (95 | GPIO_ALT_FN_2_IN) #define GPIO95_KP_MKIN6_MD (95 | GPIO_ALT_FN_3_IN) #define GPIO96_KP_DKIN3_MD (96 | GPIO_ALT_FN_1_IN) +#define GPIO96_FFRXD_MD (96 | GPIO_ALT_FN_3_IN) #define GPIO97_KP_MKIN3_MD (97 | GPIO_ALT_FN_3_IN) #define GPIO98_CIF_DD_0_MD (98 | GPIO_ALT_FN_2_IN) +#define GPIO98_FFRTS_MD (98 | GPIO_ALT_FN_3_OUT) +#define GPIO99_FFTXD_MD (99 | GPIO_ALT_FN_3_OUT) #define GPIO100_KP_MKIN0_MD (100 | GPIO_ALT_FN_1_IN) #define GPIO101_KP_MKIN1_MD (101 | GPIO_ALT_FN_1_IN) #define GPIO102_nPCE_1_MD (102 | GPIO_ALT_FN_1_OUT) -- cgit v0.10.2 From ea6a7404da4b381b35bcec48338d376a3873ea46 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 30 May 2008 18:53:55 +0100 Subject: [ARM] 5070/1: pxa: add GPIO104_PSKTSEL to pxa27x MFP configuration PSKTSEL can be routed to GPIO pin 104. This configuration is used by HP iPAQ hx4700. Signed-off-by: Philipp Zabel Acked-by: Jrgen Schindele Signed-off-by: Russell King diff --git a/include/asm-arm/arch-pxa/mfp-pxa27x.h b/include/asm-arm/arch-pxa/mfp-pxa27x.h index eb6eaa1..bc73ab8 100644 --- a/include/asm-arm/arch-pxa/mfp-pxa27x.h +++ b/include/asm-arm/arch-pxa/mfp-pxa27x.h @@ -112,6 +112,7 @@ #define GPIO57_nIOIS16 MFP_CFG_IN(GPIO57, AF1) #define GPIO56_nPWAIT MFP_CFG_IN(GPIO56, AF1) #define GPIO79_PSKTSEL MFP_CFG_OUT(GPIO79, AF1, DRIVE_HIGH) +#define GPIO104_PSKTSEL MFP_CFG_OUT(GPIO104, AF1, DRIVE_HIGH) /* I2C */ #define GPIO117_I2C_SCL MFP_CFG_IN(GPIO117, AF1) -- cgit v0.10.2 From 1e5c594607778f551b729577b046ee5d9333cfb5 Mon Sep 17 00:00:00 2001 From: surinder Date: Wed, 28 May 2008 09:51:16 +0100 Subject: [ARM] 5067/1: _raw_write_can_lock macro bugfix The current __raw_write_can_lock macro tests whether the lock can be locked by checking if it is equal to 0x80000000, whereas the lock should be lockable if its value is 0 i.e. unlocked state is represented by 0. Hence the macro should test the value of lock against 0 and not 0x80000000. Signed-off-by: Surinder Pal Singh Signed-off-by: Russell King diff --git a/include/asm-arm/spinlock.h b/include/asm-arm/spinlock.h index 800ba52..2b41ebb 100644 --- a/include/asm-arm/spinlock.h +++ b/include/asm-arm/spinlock.h @@ -142,7 +142,7 @@ static inline void __raw_write_unlock(raw_rwlock_t *rw) } /* write_can_lock - would write_trylock() succeed? */ -#define __raw_write_can_lock(x) ((x)->lock == 0x80000000) +#define __raw_write_can_lock(x) ((x)->lock == 0) /* * Read locks are a bit more hairy: -- cgit v0.10.2 From 0ef2cfc0ca4625424e5b8ead6c47359c35a7a841 Mon Sep 17 00:00:00 2001 From: Russell King Date: Mon, 2 Jun 2008 20:38:15 +0100 Subject: [ARM] pxa: fix tosa.c build error Work around: arch/arm/mach-pxa/tosa.c: In function `tosa_poweroff': arch/arm/mach-pxa/tosa.c:470: error: `GPIO_OUT' undeclared (first use in this function) arch/arm/mach-pxa/tosa.c:470: error: (Each undeclared identifier is reported only once arch/arm/mach-pxa/tosa.c:470: error: for each function it appears in.) The proper fix exists in the PXA branch of my kernel git tree, which will be pushed during the next merge window. Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index c2cbd66..ab4a9f5 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -467,8 +467,8 @@ static struct platform_device *devices[] __initdata = { static void tosa_poweroff(void) { - pxa_gpio_mode(TOSA_GPIO_ON_RESET | GPIO_OUT); - GPSR(TOSA_GPIO_ON_RESET) = GPIO_bit(TOSA_GPIO_ON_RESET); + gpio_direction_output(TOSA_GPIO_ON_RESET, 0); + gpio_set_value(TOSA_GPIO_ON_RESET, 1); mdelay(1000); arm_machine_restart('h'); -- cgit v0.10.2 From 63e14626eddb534ab429e9c2b95d3f7038b596b6 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sun, 1 Jun 2008 11:49:32 +0200 Subject: mmc_spi: mmc_spi.h should include linux/interrupts.h Since mmc_spi.h uses irqreturn_t type, it should include appropriate header, otherwise build will break if users didn't include it (some of them do not use interrupts). Signed-off-by: Anton Vorontsov Signed-off-by: Pierre Ossman Signed-off-by: Linus Torvalds diff --git a/include/linux/spi/mmc_spi.h b/include/linux/spi/mmc_spi.h index e9bbe3e..d5ca78b 100644 --- a/include/linux/spi/mmc_spi.h +++ b/include/linux/spi/mmc_spi.h @@ -1,6 +1,8 @@ #ifndef __LINUX_SPI_MMC_SPI_H #define __LINUX_SPI_MMC_SPI_H +#include + struct device; struct mmc_host; -- cgit v0.10.2 From 4b34fe156455d26ee6ed67b61539f136bf4e439c Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 2 Jun 2008 16:42:49 -0600 Subject: PNP: mark resources that conflict with PCI devices "disabled" Both the PNP/PCI conflict detection quirk and the PNP system driver must use the same mechanism to mark resources as disabled. I think it's best to keep the resource and to keep the type bit (IORESOURCE_MEM, etc), so that we match the list from firmware as closely as possible. Fixes this regression from 2.6.25: http://lkml.org/lkml/2008/6/1/82 Signed-off-by: Bjorn Helgaas Tested-by: Avuton Olrich Signed-off-by: Linus Torvalds diff --git a/drivers/pnp/quirks.c b/drivers/pnp/quirks.c index e2b7de4..1ff3bb5 100644 --- a/drivers/pnp/quirks.c +++ b/drivers/pnp/quirks.c @@ -286,7 +286,7 @@ static void quirk_system_pci_resources(struct pnp_dev *dev) pci_name(pdev), i, (unsigned long long) pci_start, (unsigned long long) pci_end); - res->flags = 0; + res->flags |= IORESOURCE_DISABLED; } } } diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index 9c2496d..8f0a570 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (res->flags & IORESOURCE_UNSET) + if (res->flags & IORESOURCE_DISABLED) continue; reserve_range(dev, res->start, res->end, 0); -- cgit v0.10.2 From 1feaa51d84e9611521ec6e59172f9f90db274588 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Tue, 3 Jun 2008 12:19:45 +0800 Subject: Blackfin Serial Driver: Clean up BF54x macro in blackfin UART driver. Hide difference in head file. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index d6b4ead..636b687 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -530,11 +530,7 @@ static unsigned int bfin_serial_get_mctrl(struct uart_port *port) if (uart->cts_pin < 0) return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -# ifdef BF54x - if (UART_GET_MSR(uart) & CTS) -# else - if (gpio_get_value(uart->cts_pin)) -# endif + if (UART_GET_CTS(uart)) return TIOCM_DSR | TIOCM_CAR; else #endif @@ -549,17 +545,9 @@ static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) return; if (mctrl & TIOCM_RTS) -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) & ~MRTS); -# else - gpio_set_value(uart->rts_pin, 0); -# endif + UART_CLEAR_RTS(uart); else -# ifdef BF54x - UART_PUT_MCR(uart, UART_GET_MCR(uart) | MRTS); -# else - gpio_set_value(uart->rts_pin, 1); -# endif + UART_SET_RTS(uart); #endif } @@ -752,11 +740,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, /* Disable UART */ ier = UART_GET_IER(uart); -#ifdef CONFIG_BF54x - UART_CLEAR_IER(uart, 0xF); -#else - UART_PUT_IER(uart, 0); -#endif + UART_DISABLE_INTS(uart); /* Set DLAB in LCR to Access DLL and DLH */ UART_SET_DLAB(uart); @@ -771,11 +755,7 @@ bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, UART_PUT_LCR(uart, lcr); /* Enable UART */ -#ifdef CONFIG_BF54x - UART_SET_IER(uart, ier); -#else - UART_PUT_IER(uart, ier); -#endif + UART_ENABLE_INTS(uart, ier); val = UART_GET_GCTL(uart); val |= UCEN; diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 26e3c80..96bd09e 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index d016603..e924569 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index f79d1a0..41d7b64 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 5eb46a7..59b4ad4 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -57,6 +57,12 @@ #define UART_SET_DLAB(uart) /* MMRs not muxed on BF54x */ #define UART_CLEAR_DLAB(uart) /* MMRs not muxed on BF54x */ +#define UART_GET_CTS(x) (UART_GET_MSR(x) & CTS) +#define UART_SET_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) | MRTS)) +#define UART_CLEAR_RTS(x) (UART_PUT_MCR(x, UART_GET_MCR(x) & ~MRTS)) +#define UART_ENABLE_INTS(x, v) UART_SET_IER(x, v) +#define UART_DISABLE_INTS(x) UART_CLEAR_IER(x, 0xF) + #if defined(CONFIG_BFIN_UART0_CTSRTS) || defined(CONFIG_BFIN_UART1_CTSRTS) # define CONFIG_SERIAL_BFIN_CTSRTS diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 7a96287..30d90b5 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -53,6 +53,12 @@ #define UART_SET_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) | DLAB); SSYNC(); } while (0) #define UART_CLEAR_DLAB(uart) do { UART_PUT_LCR(uart, UART_GET_LCR(uart) & ~DLAB); SSYNC(); } while (0) +#define UART_GET_CTS(x) gpio_get_value(x->cts_pin) +#define UART_SET_RTS(x) gpio_set_value(x->rts_pin, 1) +#define UART_CLEAR_RTS(x) gpio_set_value(x->rts_pin, 0) +#define UART_ENABLE_INTS(x, v) UART_PUT_IER(x, v) +#define UART_DISABLE_INTS(x) UART_PUT_IER(x, 0) + #ifdef CONFIG_BFIN_UART0_CTSRTS # define CONFIG_SERIAL_BFIN_CTSRTS # ifndef CONFIG_UART0_CTS_PIN -- cgit v0.10.2 From bd628bd085c459838d38f93f2f154f1a2e019e48 Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Tue, 3 Jun 2008 12:23:45 +0800 Subject: Blackfin arch: fixup warnings with the new cplb saved values Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index 7bfbd95..f061f51 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -67,7 +67,7 @@ void __init trap_init(void) CSYNC(); } -void *saved_icplb_fault_addr, *saved_dcplb_fault_addr; +unsigned long saved_icplb_fault_addr, saved_dcplb_fault_addr; int kstack_depth_to_print = 48; @@ -366,7 +366,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO - if (saved_dcplb_fault_addr < (void *)FIXED_CODE_START) + if (saved_dcplb_fault_addr < FIXED_CODE_START) printk(KERN_NOTICE "NULL pointer access\n"); else #endif @@ -421,7 +421,7 @@ asmlinkage void trap_c(struct pt_regs *fp) info.si_code = ILL_CPLB_MULHIT; sig = SIGSEGV; #ifdef CONFIG_DEBUG_HUNT_FOR_ZERO - if (saved_icplb_fault_addr < (void *)FIXED_CODE_START) + if (saved_icplb_fault_addr < FIXED_CODE_START) printk(KERN_NOTICE "Jump to NULL address\n"); else #endif @@ -939,8 +939,6 @@ void panic_cplb_error(int cplb_panic, struct pt_regs *fp) oops_in_progress = 1; - printk(KERN_EMERG "DCPLB_FAULT_ADDR=%p\n", saved_dcplb_fault_addr); - printk(KERN_EMERG "ICPLB_FAULT_ADDR=%p\n", saved_icplb_fault_addr); dump_bfin_process(fp); dump_bfin_mem(fp); show_regs(fp); -- cgit v0.10.2 From f8cc3566d2e26ba1d9afd063ff5be40014e2e269 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 20:29:55 +0900 Subject: sh: Update SE7206 defconfig. Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 0d0cda9..6b34baa 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,9 +1,10 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc4 -# Thu Sep 13 16:40:16 2007 +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 20:27:08 2008 # CONFIG_SUPERH=y +CONFIG_SUPERH32=y CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_GENERIC_BUG=y CONFIG_GENERIC_FIND_NEXT_BIT=y @@ -18,6 +19,7 @@ CONFIG_LOCKDEP_SUPPORT=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # @@ -25,47 +27,82 @@ CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y +CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +CONFIG_BSD_PROCESS_ACCT=y +# CONFIG_BSD_PROCESS_ACCT_V3 is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_AUDIT is not set +CONFIG_AUDIT=y +CONFIG_AUDITSYSCALL=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_CGROUPS=y +CONFIG_CGROUP_DEBUG=y +CONFIG_CGROUP_NS=y +CONFIG_CGROUP_DEVICE=y +# CONFIG_GROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +CONFIG_RESOURCE_COUNTERS=y +CONFIG_MM_OWNER=y +CONFIG_CGROUP_MEM_RES_CTLR=y +# CONFIG_SYSFS_DEPRECATED_V2 is not set +CONFIG_RELAY=y +CONFIG_NAMESPACES=y +CONFIG_UTS_NS=y +CONFIG_IPC_NS=y +CONFIG_USER_NS=y +CONFIG_PID_NS=y +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y # CONFIG_UID16 is not set # CONFIG_SYSCTL_SYSCALL is not set -# CONFIG_KALLSYMS is not set -# CONFIG_HOTPLUG is not set +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y # CONFIG_ELF_CORE is not set -# CONFIG_BASE_FULL is not set -# CONFIG_FUTEX is not set +# CONFIG_COMPAT_BRK is not set +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y CONFIG_ANON_INODES=y -# CONFIG_EPOLL is not set +CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y -# CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_SLUB_DEBUG=y +CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set +# CONFIG_SLUB is not set +CONFIG_SLOB=y +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_RT_MUTEXES=y CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=1 -# CONFIG_MODULES is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set @@ -81,6 +118,7 @@ CONFIG_IOSCHED_NOOP=y # CONFIG_DEFAULT_CFQ is not set CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" +# CONFIG_CLASSIC_RCU is not set # # System type @@ -88,7 +126,10 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7203 is not set CONFIG_CPU_SUBTYPE_SH7206=y +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set # CONFIG_CPU_SUBTYPE_SH7705 is not set # CONFIG_CPU_SUBTYPE_SH7706 is not set # CONFIG_CPU_SUBTYPE_SH7707 is not set @@ -97,6 +138,7 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7710 is not set # CONFIG_CPU_SUBTYPE_SH7712 is not set # CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set # CONFIG_CPU_SUBTYPE_SH7750 is not set # CONFIG_CPU_SUBTYPE_SH7091 is not set # CONFIG_CPU_SUBTYPE_SH7750R is not set @@ -105,14 +147,17 @@ CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7751R is not set # CONFIG_CPU_SUBTYPE_SH7760 is not set # CONFIG_CPU_SUBTYPE_SH4_202 is not set -# CONFIG_CPU_SUBTYPE_ST40STB1 is not set -# CONFIG_CPU_SUBTYPE_ST40GX1 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set # CONFIG_CPU_SUBTYPE_SH7770 is not set # CONFIG_CPU_SUBTYPE_SH7780 is not set # CONFIG_CPU_SUBTYPE_SH7785 is not set # CONFIG_CPU_SUBTYPE_SHX3 is not set # CONFIG_CPU_SUBTYPE_SH7343 is not set # CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set # # Memory management options @@ -121,23 +166,25 @@ CONFIG_QUICKLIST=y CONFIG_PAGE_OFFSET=0x00000000 CONFIG_MEMORY_START=0x0c000000 CONFIG_MEMORY_SIZE=0x04000000 +CONFIG_29BIT=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_MAX_ACTIVE_REGIONS=1 CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_PAGE_SIZE_4KB=y # CONFIG_PAGE_SIZE_8KB is not set # CONFIG_PAGE_SIZE_64KB is not set CONFIG_SELECT_MEMORY_MODEL=y -# CONFIG_FLATMEM_MANUAL is not set +CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 @@ -183,13 +230,16 @@ CONFIG_CPU_FREQ_TABLE=y CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_STAT_DETAILS is not set CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set CONFIG_CPU_FREQ_GOV_PERFORMANCE=y # CONFIG_CPU_FREQ_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_GOV_USERSPACE is not set # CONFIG_CPU_FREQ_GOV_ONDEMAND is not set # CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -# CONFIG_SH_CPU_FREQ is not set +CONFIG_SH_CPU_FREQ=y # # DMA support @@ -213,11 +263,15 @@ CONFIG_HEARTBEAT=y # CONFIG_HZ_300 is not set CONFIG_HZ_1000=y CONFIG_HZ=1000 -# CONFIG_KEXEC is not set +# CONFIG_SCHED_HRTICK is not set +CONFIG_KEXEC=y # CONFIG_CRASH_DUMP is not set -CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set +CONFIG_PREEMPT=y +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y +CONFIG_GUSA=y # # Boot options @@ -225,25 +279,25 @@ CONFIG_PREEMPT_NONE=y CONFIG_ZERO_PAGE_OFFSET=0x00001000 CONFIG_BOOT_LINK_OFFSET=0x00800000 CONFIG_CMDLINE_BOOL=y -CONFIG_CMDLINE="console=ttySC3,115200 earlyprintk=serial ignore_loglevel" +CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial" # # Bus options # -# CONFIG_CF_ENABLER is not set +CONFIG_CF_ENABLER=y +# CONFIG_CF_AREA5 is not set +CONFIG_CF_AREA6=y +CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set - -# -# PCCARD (PCMCIA/CardBus) support -# +# CONFIG_PCCARD is not set # # Executable file formats # CONFIG_BINFMT_FLAT=y CONFIG_BINFMT_ZFLAT=y -# CONFIG_BINFMT_SHARED_FLAT is not set -# CONFIG_BINFMT_MISC is not set +CONFIG_BINFMT_SHARED_FLAT=y +CONFIG_BINFMT_MISC=y # # Networking @@ -253,14 +307,24 @@ CONFIG_NET=y # # Networking options # -# CONFIG_PACKET is not set -# CONFIG_UNIX is not set -# CONFIG_NET_KEY is not set +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +CONFIG_NET_KEY=y +# CONFIG_NET_KEY_MIGRATE is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_ARPD is not set @@ -273,14 +337,13 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -297,10 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -308,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -329,8 +389,10 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" # CONFIG_STANDALONE is not set # CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -339,11 +401,9 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -356,6 +416,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -390,7 +451,6 @@ CONFIG_MTD_PHYSMAP=y CONFIG_MTD_PHYSMAP_START=0x20000000 CONFIG_MTD_PHYSMAP_LEN=0x01000000 CONFIG_MTD_PHYSMAP_BANKWIDTH=4 -# CONFIG_MTD_SOLUTIONENGINE is not set # CONFIG_MTD_UCLINUX is not set # CONFIG_MTD_PLATRAM is not set @@ -418,13 +478,19 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=4 # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set -# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y -# CONFIG_EEPROM_93CX6 is not set +CONFIG_EEPROM_93CX6=y +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -443,23 +509,30 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_STNIC is not set CONFIG_SMC91X=y -CONFIG_NETDEV_1000=y -CONFIG_NETDEV_10000=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # # Wireless LAN # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -469,28 +542,7 @@ CONFIG_NETDEV_10000=y # # Input device support # -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set -# CONFIG_INPUT_POLLDEV is not set - -# -# Userland interfaces -# -# CONFIG_INPUT_MOUSEDEV is not set -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -# CONFIG_INPUT_EVDEV is not set -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -# CONFIG_INPUT_KEYBOARD is not set -# CONFIG_INPUT_MOUSE is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TABLET is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set +# CONFIG_INPUT is not set # # Hardware I/O ports @@ -502,6 +554,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set # @@ -520,106 +573,119 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_UNIX98_PTYS is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -CONFIG_DAB=y +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set # # Graphics support # +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set -CONFIG_HID_SUPPORT=y -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set -# CONFIG_RTC_CLASS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set # -# DMA Engine support +# RTC interfaces # -# CONFIG_DMA_ENGINE is not set +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set # -# DMA Clients +# SPI RTC drivers # # -# DMA Devices +# Platform RTC drivers # +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set # -# Userspace I/O +# on-CPU RTC drivers # +CONFIG_RTC_DRV_SH=y # CONFIG_UIO is not set # # File systems # -# CONFIG_EXT2_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=y +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set -# CONFIG_DNOTIFY is not set # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -642,10 +708,11 @@ CONFIG_ROMFS_FS=y # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y -# CONFIG_SYSFS is not set -# CONFIG_TMPFS is not set +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y +CONFIG_CONFIGFS_FS=y # # Miscellaneous filesystems @@ -658,18 +725,28 @@ CONFIG_RAMFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set +CONFIG_CRAMFS=y # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# -# CONFIG_NFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set # CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set # CONFIG_CIFS is not set # CONFIG_NCP_FS is not set @@ -681,30 +758,20 @@ CONFIG_RAMFS=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# - -# -# Profiling support -# -CONFIG_PROFILING=y -# CONFIG_OPROFILE is not set +# CONFIG_DLM is not set # # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -712,7 +779,10 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set -CONFIG_SLUB_DEBUG_ON=y +# CONFIG_DEBUG_OBJECTS is not set +CONFIG_DEBUG_PREEMPT=y +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set # CONFIG_DEBUG_MUTEXES is not set # CONFIG_DEBUG_LOCK_ALLOC is not set @@ -722,38 +792,123 @@ CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y -CONFIG_DEBUG_INFO=y -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_INFO is not set +CONFIG_DEBUG_VM=y +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_LIST=y +# CONFIG_DEBUG_SG is not set CONFIG_FRAME_POINTER=y -CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set # CONFIG_SH_STANDARD_BIOS is not set -CONFIG_EARLY_SCIF_CONSOLE=y -CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe9800 -CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y -# CONFIG_4KSTACKS is not set +# CONFIG_IRQSTACKS is not set # # Security options # # CONFIG_KEYS is not set -# CONFIG_CRYPTO is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +# CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +# CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +CONFIG_CRYPTO_DEFLATE=y +CONFIG_CRYPTO_LZO=y +# CONFIG_CRYPTO_HW is not set # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_CRC_CCITT=y +CONFIG_CRC16=y +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set +CONFIG_CRC7=y +CONFIG_LIBCRC32C=y +CONFIG_AUDIT_GENERIC=y CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_LZO_COMPRESS=y +CONFIG_LZO_DECOMPRESS=y +CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y -- cgit v0.10.2 From 39eb41ef0732a02acb3babe5ba1df92d76b9fb8f Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Tue, 3 Jun 2008 20:30:10 +0900 Subject: sh: Add defconfig for RSK7203. RSK7203 is supportable through the generic machvec, so we add a defconfig for those bits. This gets updated with more complete board support later. Signed-off-by: Paul Mundt diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig new file mode 100644 index 0000000..a0ebd43 --- /dev/null +++ b/arch/sh/configs/rsk7203_defconfig @@ -0,0 +1,841 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26-rc4 +# Tue Jun 3 13:02:42 2008 +# +CONFIG_SUPERH=y +CONFIG_SUPERH32=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_NO_VIRT_TO_BUS=y +CONFIG_ARCH_SUPPORTS_AOUT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_PROFILING=y +# CONFIG_MARKERS is not set +CONFIG_OPROFILE=y +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +# CONFIG_MODULES is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_CLASSIC_RCU=y + +# +# System type +# +CONFIG_CPU_SH2=y +CONFIG_CPU_SH2A=y +# CONFIG_CPU_SUBTYPE_SH7619 is not set +CONFIG_CPU_SUBTYPE_SH7203=y +# CONFIG_CPU_SUBTYPE_SH7206 is not set +# CONFIG_CPU_SUBTYPE_SH7263 is not set +# CONFIG_CPU_SUBTYPE_MXG is not set +# CONFIG_CPU_SUBTYPE_SH7705 is not set +# CONFIG_CPU_SUBTYPE_SH7706 is not set +# CONFIG_CPU_SUBTYPE_SH7707 is not set +# CONFIG_CPU_SUBTYPE_SH7708 is not set +# CONFIG_CPU_SUBTYPE_SH7709 is not set +# CONFIG_CPU_SUBTYPE_SH7710 is not set +# CONFIG_CPU_SUBTYPE_SH7712 is not set +# CONFIG_CPU_SUBTYPE_SH7720 is not set +# CONFIG_CPU_SUBTYPE_SH7721 is not set +# CONFIG_CPU_SUBTYPE_SH7750 is not set +# CONFIG_CPU_SUBTYPE_SH7091 is not set +# CONFIG_CPU_SUBTYPE_SH7750R is not set +# CONFIG_CPU_SUBTYPE_SH7750S is not set +# CONFIG_CPU_SUBTYPE_SH7751 is not set +# CONFIG_CPU_SUBTYPE_SH7751R is not set +# CONFIG_CPU_SUBTYPE_SH7760 is not set +# CONFIG_CPU_SUBTYPE_SH4_202 is not set +# CONFIG_CPU_SUBTYPE_SH7723 is not set +# CONFIG_CPU_SUBTYPE_SH7763 is not set +# CONFIG_CPU_SUBTYPE_SH7770 is not set +# CONFIG_CPU_SUBTYPE_SH7780 is not set +# CONFIG_CPU_SUBTYPE_SH7785 is not set +# CONFIG_CPU_SUBTYPE_SHX3 is not set +# CONFIG_CPU_SUBTYPE_SH7343 is not set +# CONFIG_CPU_SUBTYPE_SH7722 is not set +# CONFIG_CPU_SUBTYPE_SH7366 is not set +# CONFIG_CPU_SUBTYPE_SH5_101 is not set +# CONFIG_CPU_SUBTYPE_SH5_103 is not set + +# +# Memory management options +# +CONFIG_QUICKLIST=y +CONFIG_PAGE_OFFSET=0x00000000 +CONFIG_MEMORY_START=0x0c000000 +CONFIG_MEMORY_SIZE=0x01000000 +CONFIG_29BIT=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_ENABLE=y +CONFIG_ARCH_SPARSEMEM_DEFAULT=y +CONFIG_MAX_ACTIVE_REGIONS=1 +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_ARCH_SELECT_MEMORY_MODEL=y +CONFIG_PAGE_SIZE_4KB=y +# CONFIG_PAGE_SIZE_8KB is not set +# CONFIG_PAGE_SIZE_64KB is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_SPARSEMEM_STATIC=y +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_NR_QUICK=2 + +# +# Cache configuration +# +# CONFIG_SH_DIRECT_MAPPED is not set +CONFIG_CACHE_WRITEBACK=y +# CONFIG_CACHE_WRITETHROUGH is not set +# CONFIG_CACHE_OFF is not set + +# +# Processor features +# +# CONFIG_CPU_LITTLE_ENDIAN is not set +CONFIG_CPU_BIG_ENDIAN=y +CONFIG_SH_FPU=y +CONFIG_CPU_HAS_FPU=y + +# +# Board support +# + +# +# Timer and clock configuration +# +CONFIG_SH_CMT=y +# CONFIG_SH_MTU2 is not set +CONFIG_SH_TIMER_IRQ=142 +CONFIG_SH_PCLK_FREQ=16670800 +CONFIG_SH_CLK_MD=0 +# CONFIG_TICK_ONESHOT is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +# CONFIG_CPU_FREQ_STAT_DETAILS is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set +CONFIG_SH_CPU_FREQ=y + +# +# DMA support +# + +# +# Companion Chips +# + +# +# Additional SuperH Device Drivers +# +CONFIG_HEARTBEAT=y +# CONFIG_PUSH_SWITCH is not set + +# +# Kernel features +# +# CONFIG_HZ_100 is not set +# CONFIG_HZ_250 is not set +# CONFIG_HZ_300 is not set +CONFIG_HZ_1000=y +CONFIG_HZ=1000 +# CONFIG_SCHED_HRTICK is not set +# CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_GUSA=y + +# +# Boot options +# +CONFIG_ZERO_PAGE_OFFSET=0x00001000 +CONFIG_BOOT_LINK_OFFSET=0x00800000 +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="console=ttySC0,115200 earlyprintk=serial ignore_loglevel" + +# +# Bus options +# +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_UNIX is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +# CONFIG_INET_DIAG is not set +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +# CONFIG_STANDALONE is not set +# CONFIG_PREVENT_FIRMWARE_BUILD is not set +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_CONCAT=y +CONFIG_MTD_PARTITIONS=y +CONFIG_MTD_REDBOOT_PARTS=y +CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 +# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set +# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=0x20000000 +CONFIG_MTD_PHYSMAP_LEN=0x01000000 +CONFIG_MTD_PHYSMAP_BANKWIDTH=4 +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_AX88796 is not set +# CONFIG_STNIC is not set +CONFIG_SMC91X=y +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_E1000E_ENABLED is not set +CONFIG_NETDEV_10000=y + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SH_SCI=y +CONFIG_SERIAL_SH_SCI_NR_UARTS=4 +CONFIG_SERIAL_SH_SCI_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_UNIX98_PTYS is not set +# CONFIG_LEGACY_PTYS is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set +# CONFIG_SPI is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_THERMAL=y +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# SPI RTC drivers +# + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_SH=y +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +# CONFIG_INOTIFY is not set +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set + +# +# Kernel hacking +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +# CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +CONFIG_DEBUG_SHIRQ=y +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_SH_STANDARD_BIOS is not set +CONFIG_EARLY_SCIF_CONSOLE=y +CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000 +CONFIG_EARLY_PRINTK=y +CONFIG_DEBUG_BOOTMEM=y +CONFIG_DEBUG_STACKOVERFLOW=y +CONFIG_DEBUG_STACK_USAGE=y +# CONFIG_IRQSTACKS is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From 07bc76dfa19b10017b518dd9aa1b2719e8c863de Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Tue, 3 Jun 2008 14:46:34 +0200 Subject: [ALSA] hda - Fix resume of auto-config mode with Realtek codecs The auto-config mode of Realtek ALC codecs has a bug since 2.6.25 that it cannot resume properly. The problem was the wrong assignment of init_hook that overrides the whole initialization. Relevant bug reports: http://bugzilla.kernel.org/show_bug.cgi?id=10662 https://bugzilla.novell.com/show_bug.cgi?id=385473 Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 8f31247..f46df68 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -942,7 +942,6 @@ do_sku: AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT); spec->unsol_event = alc_sku_unsol_event; - spec->init_hook = alc_sku_automute; } /* -- cgit v0.10.2 From 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Tue, 3 Jun 2008 15:18:54 +0100 Subject: serial_core: uart_set_ldisc infrastructure The tty layer provides a callback that is used when the line discipline is changed. Some hardware uses this to configure hardware specific features such as IrDA mode on serial ports. Unfortunately the serial layer does not provide this feature or pass it down to drivers. Blackfin used to hack around this by rewriting the tty ops, but those are now properly shared and const so the hack fails. Instead provide the proper operations. This change plus a follow up from the Blackfin guys is needed to avoid blackfin losing features in this release. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 53b03c6..951a75e 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1165,6 +1165,15 @@ out: return ret; } +static void uart_set_ldisc(struct tty_struct *tty, int ldisc) +{ + struct uart_state *state = tty->driver_data; + struct uart_port *port = state->port; + + if (port->ops->set_ldisc) + port->ops->set_ldisc(port); +} + static void uart_set_termios(struct tty_struct *tty, struct ktermios *old_termios) { @@ -2288,6 +2297,7 @@ static const struct tty_operations uart_ops = { .unthrottle = uart_unthrottle, .send_xchar = uart_send_xchar, .set_termios = uart_set_termios, + .set_ldisc = uart_set_ldisc, .stop = uart_stop, .start = uart_start, .hangup = uart_hangup, diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index d32123a..d8f31de 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -192,6 +192,7 @@ struct uart_ops { void (*shutdown)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + void (*set_ldisc)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); int (*set_wake)(struct uart_port *, unsigned int state); -- cgit v0.10.2 From 537d59af73d894750cff14f90fe2b6d77fbab15b Mon Sep 17 00:00:00 2001 From: Dave Young Date: Sun, 1 Jun 2008 23:50:52 -0700 Subject: bluetooth: rfcomm_dev_state_change deadlock fix There's logic in __rfcomm_dlc_close: rfcomm_dlc_lock(d); d->state = BT_CLOSED; d->state_changed(d, err); rfcomm_dlc_unlock(d); In rfcomm_dev_state_change, it's possible that rfcomm_dev_put try to take the dlc lock, then we will deadlock. Here fixed it by unlock dlc before rfcomm_dev_get in rfcomm_dev_state_change. why not unlock just before rfcomm_dev_put? it's because there's another problem. rfcomm_dev_get/rfcomm_dev_del will take rfcomm_dev_lock, but in rfcomm_dev_add the lock order is : rfcomm_dev_lock --> dlc lock so I unlock dlc before the taken of rfcomm_dev_lock. Actually it's a regression caused by commit 1905f6c736cb618e07eca0c96e60e3c024023428 ("bluetooth : __rfcomm_dlc_close lock fix"), the dlc state_change could be two callbacks : rfcomm_sk_state_change and rfcomm_dev_state_change. I missed the rfcomm_sk_state_change that time. Thanks Arjan van de Ven for the effort in commit 4c8411f8c115def968820a4df6658ccfd55d7f1a ("bluetooth: fix locking bug in the rfcomm socket cleanup handling") but he missed the rfcomm_dev_state_change lock issue. Signed-off-by: Dave Young Acked-by: Marcel Holtmann Signed-off-by: David S. Miller diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c index c3f749a..c919187 100644 --- a/net/bluetooth/rfcomm/tty.c +++ b/net/bluetooth/rfcomm/tty.c @@ -566,11 +566,22 @@ static void rfcomm_dev_state_change(struct rfcomm_dlc *dlc, int err) if (dlc->state == BT_CLOSED) { if (!dev->tty) { if (test_bit(RFCOMM_RELEASE_ONHUP, &dev->flags)) { - if (rfcomm_dev_get(dev->id) == NULL) + /* Drop DLC lock here to avoid deadlock + * 1. rfcomm_dev_get will take rfcomm_dev_lock + * but in rfcomm_dev_add there's lock order: + * rfcomm_dev_lock -> dlc lock + * 2. rfcomm_dev_put will deadlock if it's + * the last reference + */ + rfcomm_dlc_unlock(dlc); + if (rfcomm_dev_get(dev->id) == NULL) { + rfcomm_dlc_lock(dlc); return; + } rfcomm_dev_del(dev); rfcomm_dev_put(dev); + rfcomm_dlc_lock(dlc); } } else tty_hangup(dev->tty); -- cgit v0.10.2 From 7dccf1f4e1696c79bff064c3770867cc53cbc71c Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Tue, 3 Jun 2008 14:53:46 -0700 Subject: ax25: Fix NULL pointer dereference and lockup. From: Jarek Poplawski There is only one function in AX25 calling skb_append(), and it really looks suspicious: appends skb after previously enqueued one, but in the meantime this previous skb could be removed from the queue. This patch Fixes it the simple way, so this is not fully compatible with the current method, but testing hasn't shown any problems. Signed-off-by: Ralf Baechle Signed-off-by: David S. Miller diff --git a/net/ax25/ax25_subr.c b/net/ax25/ax25_subr.c index d8f2157..034aa10 100644 --- a/net/ax25/ax25_subr.c +++ b/net/ax25/ax25_subr.c @@ -64,20 +64,15 @@ void ax25_frames_acked(ax25_cb *ax25, unsigned short nr) void ax25_requeue_frames(ax25_cb *ax25) { - struct sk_buff *skb, *skb_prev = NULL; + struct sk_buff *skb; /* * Requeue all the un-ack-ed frames on the output queue to be picked * up by ax25_kick called from the timer. This arrangement handles the * possibility of an empty output queue. */ - while ((skb = skb_dequeue(&ax25->ack_queue)) != NULL) { - if (skb_prev == NULL) - skb_queue_head(&ax25->write_queue, skb); - else - skb_append(skb_prev, skb, &ax25->write_queue); - skb_prev = skb; - } + while ((skb = skb_dequeue_tail(&ax25->ack_queue)) != NULL) + skb_queue_head(&ax25->write_queue, skb); } /* -- cgit v0.10.2 From 9ecad877948deb2871d29e03786a7d7911687009 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Tue, 3 Jun 2008 15:18:36 -0700 Subject: irda: Sock leak on error path in irda_create. Bad type/protocol specified result in sk leak. Fix is simple - release the sk if bad values are given, but to make it possible just to call sk_free(), I move some sk initialization a bit lower. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller diff --git a/net/irda/af_irda.c b/net/irda/af_irda.c index ae54b20..3eb5bcc 100644 --- a/net/irda/af_irda.c +++ b/net/irda/af_irda.c @@ -1093,11 +1093,6 @@ static int irda_create(struct net *net, struct socket *sock, int protocol) init_waitqueue_head(&self->query_wait); - /* Initialise networking socket struct */ - sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */ - sk->sk_family = PF_IRDA; - sk->sk_protocol = protocol; - switch (sock->type) { case SOCK_STREAM: sock->ops = &irda_stream_ops; @@ -1124,13 +1119,20 @@ static int irda_create(struct net *net, struct socket *sock, int protocol) self->max_sdu_size_rx = TTP_SAR_UNBOUND; break; default: + sk_free(sk); return -ESOCKTNOSUPPORT; } break; default: + sk_free(sk); return -ESOCKTNOSUPPORT; } + /* Initialise networking socket struct */ + sock_init_data(sock, sk); /* Note : set sk->sk_refcnt to 1 */ + sk->sk_family = PF_IRDA; + sk->sk_protocol = protocol; + /* Register as a client with IrLMP */ self->ckey = irlmp_register_client(0, NULL, NULL, NULL); self->mask.word = 0xffff; -- cgit v0.10.2 From 399dc43bc29fe1ac19340c56c0df84aa0ea53c85 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 3 Jun 2008 15:21:21 -0700 Subject: sparc: switch /proc/led to seq_file Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/led.c b/arch/sparc/kernel/led.c index 59e9344..adaaed4 100644 --- a/arch/sparc/kernel/led.c +++ b/arch/sparc/kernel/led.c @@ -2,6 +2,7 @@ #include #include #include +#include #include #include #include @@ -45,21 +46,22 @@ static void led_blink(unsigned long timeout) add_timer(&led_blink_timer); } -static int led_read_proc(char *buf, char **start, off_t offset, int count, - int *eof, void *data) +static int led_proc_show(struct seq_file *m, void *v) { - int len = 0; - if (get_auxio() & AUXIO_LED) - len = sprintf(buf, "on\n"); + seq_puts(m, "on\n"); else - len = sprintf(buf, "off\n"); + seq_puts(m, "off\n"); + return 0; +} - return len; +static int led_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, led_proc_show, NULL); } -static int led_write_proc(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t led_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *ppos) { char *buf = NULL; @@ -103,6 +105,15 @@ static int led_write_proc(struct file *file, const char __user *buffer, return count; } +static const struct file_operations led_proc_fops = { + .owner = THIS_MODULE, + .open = led_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = led_proc_write, +}; + static struct proc_dir_entry *led; #define LED_VERSION "0.1" @@ -112,12 +123,9 @@ static int __init led_init(void) init_timer(&led_blink_timer); led_blink_timer.function = led_blink; - led = create_proc_entry("led", 0, NULL); + led = proc_create("led", 0, NULL, &led_proc_fops); if (!led) return -ENOMEM; - - led->read_proc = led_read_proc; /* reader function */ - led->write_proc = led_write_proc; /* writer function */ led->owner = THIS_MODULE; printk(KERN_INFO -- cgit v0.10.2 From 57c511d8d47caeeae375cb8106662c0bd6a7e7e0 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 3 Jun 2008 16:00:01 -0700 Subject: bridge: update URL This patch updates the URL of the bridge homepage. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt index bdae2db..bec69a8 100644 --- a/Documentation/networking/bridge.txt +++ b/Documentation/networking/bridge.txt @@ -1,6 +1,6 @@ In order to use the Ethernet bridging functionality, you'll need the userspace tools. These programs and documentation are available -at http://bridge.sourceforge.net. The download page is +at http://www.linux-foundation.org/en/Net:Bridge. The download page is http://prdownloads.sourceforge.net/bridge. If you still have questions, don't hesitate to post to the mailing list diff --git a/MAINTAINERS b/MAINTAINERS index 0a6d2ca..46fa179 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1611,7 +1611,7 @@ ETHERNET BRIDGE P: Stephen Hemminger M: shemminger@linux-foundation.org L: bridge@lists.linux-foundation.org -W: http://bridge.sourceforge.net/ +W: http://www.linux-foundation.org/en/Net:Bridge S: Maintained ETHERTEAM 16I DRIVER -- cgit v0.10.2 From b9f5f52cca3e94f1e7509f366aa250ebbe1ed0b5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 3 Jun 2008 16:03:15 -0700 Subject: net: neighbour table ABI problem The neighbor table time of last use information is returned in the incorrect unit. Kernel to user space ABI's need to use USER_HZ (or milliseconds), otherwise the application has to try and discover the real system HZ value which is problematic. Linux has standardized on keeping USER_HZ consistent (100hz) even when kernel is running internally at some other value. This change is small, but it breaks the ABI for older version of iproute2 utilities. But these utilities are already broken since they are looking at the psched_hz values which are completely different. So let's just go ahead and fix both kernel and user space. Older utilities will just print wrong values. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 5d9d713..3896de7 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -2057,9 +2057,9 @@ static int neigh_fill_info(struct sk_buff *skb, struct neighbour *neigh, goto nla_put_failure; } - ci.ndm_used = now - neigh->used; - ci.ndm_confirmed = now - neigh->confirmed; - ci.ndm_updated = now - neigh->updated; + ci.ndm_used = jiffies_to_clock_t(now - neigh->used); + ci.ndm_confirmed = jiffies_to_clock_t(now - neigh->confirmed); + ci.ndm_updated = jiffies_to_clock_t(now - neigh->updated); ci.ndm_refcnt = atomic_read(&neigh->refcnt) - 1; read_unlock_bh(&neigh->lock); -- cgit v0.10.2 From 7557af25155a82ac2dad73eec6b0166868bf8ea2 Mon Sep 17 00:00:00 2001 From: Brice Goglin Date: Tue, 3 Jun 2008 16:07:45 -0700 Subject: net_dma: remove duplicate assignment in dma_skb_copy_datagram_iovec No need to compute copy twice in the frags loop in dma_skb_copy_datagram_iovec(). Signed-off-by: Brice Goglin Acked-by: Shannon Nelson Signed-off-by: Maciej Sosnowski Signed-off-by: Dan Williams Signed-off-by: David S. Miller diff --git a/net/core/user_dma.c b/net/core/user_dma.c index 0ad1cd5..c77aff9 100644 --- a/net/core/user_dma.c +++ b/net/core/user_dma.c @@ -75,7 +75,7 @@ int dma_skb_copy_datagram_iovec(struct dma_chan *chan, end = start + skb_shinfo(skb)->frags[i].size; copy = end - offset; - if ((copy = end - offset) > 0) { + if (copy > 0) { skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; struct page *page = frag->page; -- cgit v0.10.2 From 51b77cae0d5aa8e1546fca855dcfe48ddfadfa9c Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Tue, 3 Jun 2008 16:36:01 -0700 Subject: route: Mark unused route cache flags as such. Also removes an obsolete check for the unused flag RTCF_MASQ. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller diff --git a/include/linux/in_route.h b/include/linux/in_route.h index 61f25c3..b261b8c 100644 --- a/include/linux/in_route.h +++ b/include/linux/in_route.h @@ -10,19 +10,19 @@ #define RTCF_NOPMTUDISC RTM_F_NOPMTUDISC #define RTCF_NOTIFY 0x00010000 -#define RTCF_DIRECTDST 0x00020000 +#define RTCF_DIRECTDST 0x00020000 /* unused */ #define RTCF_REDIRECTED 0x00040000 -#define RTCF_TPROXY 0x00080000 +#define RTCF_TPROXY 0x00080000 /* unused */ -#define RTCF_FAST 0x00200000 -#define RTCF_MASQ 0x00400000 -#define RTCF_SNAT 0x00800000 +#define RTCF_FAST 0x00200000 /* unused */ +#define RTCF_MASQ 0x00400000 /* unused */ +#define RTCF_SNAT 0x00800000 /* unused */ #define RTCF_DOREDIRECT 0x01000000 #define RTCF_DIRECTSRC 0x04000000 #define RTCF_DNAT 0x08000000 #define RTCF_BROADCAST 0x10000000 #define RTCF_MULTICAST 0x20000000 -#define RTCF_REJECT 0x40000000 +#define RTCF_REJECT 0x40000000 /* unused */ #define RTCF_LOCAL 0x80000000 #define RTCF_NAT (RTCF_DNAT|RTCF_SNAT) diff --git a/net/ipv4/route.c b/net/ipv4/route.c index df41026..96be336 100644 --- a/net/ipv4/route.c +++ b/net/ipv4/route.c @@ -1792,7 +1792,7 @@ static int __mkroute_input(struct sk_buff *skb, if (err) flags |= RTCF_DIRECTSRC; - if (out_dev == in_dev && err && !(flags & RTCF_MASQ) && + if (out_dev == in_dev && err && (IN_DEV_SHARED_MEDIA(out_dev) || inet_addr_onlink(out_dev, saddr, FIB_RES_GW(*res)))) flags |= RTCF_DOREDIRECT; -- cgit v0.10.2 From 1f9d11c7c99da706e33646c3a9080dd5a8ef9a0b Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Tue, 3 Jun 2008 16:36:27 -0700 Subject: route: Mark unused routing attributes as such Also removes an unused policy entry for an attribute which is only used in kernel->user direction. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index 44c81c7..a2aec2c 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -267,10 +267,10 @@ enum rtattr_type_t RTA_PREFSRC, RTA_METRICS, RTA_MULTIPATH, - RTA_PROTOINFO, + RTA_PROTOINFO, /* no longer used */ RTA_FLOW, RTA_CACHEINFO, - RTA_SESSION, + RTA_SESSION, /* no longer used */ RTA_MP_ALGO, /* no longer used */ RTA_TABLE, __RTA_MAX diff --git a/net/ipv4/fib_frontend.c b/net/ipv4/fib_frontend.c index 0f1557a..0b2ac6a 100644 --- a/net/ipv4/fib_frontend.c +++ b/net/ipv4/fib_frontend.c @@ -506,7 +506,6 @@ const struct nla_policy rtm_ipv4_policy[RTA_MAX+1] = { [RTA_PREFSRC] = { .type = NLA_U32 }, [RTA_METRICS] = { .type = NLA_NESTED }, [RTA_MULTIPATH] = { .len = sizeof(struct rtnexthop) }, - [RTA_PROTOINFO] = { .type = NLA_U32 }, [RTA_FLOW] = { .type = NLA_U32 }, }; -- cgit v0.10.2 From bc3ed28caaef55e7e3a9316464256353c5f9b1df Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Tue, 3 Jun 2008 16:36:54 -0700 Subject: netlink: Improve returned error codes Make nlmsg_trim(), nlmsg_cancel(), genlmsg_cancel(), and nla_nest_cancel() void functions. Return -EMSGSIZE instead of -1 if the provided message buffer is not big enough. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller diff --git a/include/net/genetlink.h b/include/net/genetlink.h index decdda5..747c255 100644 --- a/include/net/genetlink.h +++ b/include/net/genetlink.h @@ -162,9 +162,9 @@ static inline int genlmsg_end(struct sk_buff *skb, void *hdr) * @skb: socket buffer the message is stored in * @hdr: generic netlink message header */ -static inline int genlmsg_cancel(struct sk_buff *skb, void *hdr) +static inline void genlmsg_cancel(struct sk_buff *skb, void *hdr) { - return nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN); + nlmsg_cancel(skb, hdr - GENL_HDRLEN - NLMSG_HDRLEN); } /** diff --git a/include/net/netlink.h b/include/net/netlink.h index 112dcdf..dfc3701 100644 --- a/include/net/netlink.h +++ b/include/net/netlink.h @@ -556,14 +556,12 @@ static inline void *nlmsg_get_pos(struct sk_buff *skb) * @skb: socket buffer the message is stored in * @mark: mark to trim to * - * Trims the message to the provided mark. Returns -1. + * Trims the message to the provided mark. */ -static inline int nlmsg_trim(struct sk_buff *skb, const void *mark) +static inline void nlmsg_trim(struct sk_buff *skb, const void *mark) { if (mark) skb_trim(skb, (unsigned char *) mark - skb->data); - - return -1; } /** @@ -572,11 +570,11 @@ static inline int nlmsg_trim(struct sk_buff *skb, const void *mark) * @nlh: netlink message header * * Removes the complete netlink message including all - * attributes from the socket buffer again. Returns -1. + * attributes from the socket buffer again. */ -static inline int nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh) +static inline void nlmsg_cancel(struct sk_buff *skb, struct nlmsghdr *nlh) { - return nlmsg_trim(skb, nlh); + nlmsg_trim(skb, nlh); } /** @@ -775,7 +773,7 @@ static inline int __nla_parse_nested_compat(struct nlattr *tb[], int maxtype, int nested_len = nla_len(nla) - NLA_ALIGN(len); if (nested_len < 0) - return -1; + return -EINVAL; if (nested_len >= nla_attr_size(0)) return nla_parse(tb, maxtype, nla_data(nla) + NLA_ALIGN(len), nested_len, policy); @@ -1080,11 +1078,11 @@ static inline int nla_nest_compat_end(struct sk_buff *skb, struct nlattr *start) * @start: container attribute * * Removes the container attribute and including all nested - * attributes. Returns -1. + * attributes. Returns -EMSGSIZE */ -static inline int nla_nest_cancel(struct sk_buff *skb, struct nlattr *start) +static inline void nla_nest_cancel(struct sk_buff *skb, struct nlattr *start) { - return nlmsg_trim(skb, start); + nlmsg_trim(skb, start); } /** diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 3896de7..65f01f7 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -1714,7 +1714,8 @@ static int neightbl_fill_parms(struct sk_buff *skb, struct neigh_parms *parms) return nla_nest_end(skb, nest); nla_put_failure: - return nla_nest_cancel(skb, nest); + nla_nest_cancel(skb, nest); + return -EMSGSIZE; } static int neightbl_fill_info(struct sk_buff *skb, struct neigh_table *tbl, diff --git a/net/core/rtnetlink.c b/net/core/rtnetlink.c index cf857c4..a9a7721 100644 --- a/net/core/rtnetlink.c +++ b/net/core/rtnetlink.c @@ -498,7 +498,8 @@ int rtnetlink_put_metrics(struct sk_buff *skb, u32 *metrics) return nla_nest_end(skb, mx); nla_put_failure: - return nla_nest_cancel(skb, mx); + nla_nest_cancel(skb, mx); + return -EMSGSIZE; } int rtnl_put_cacheinfo(struct sk_buff *skb, struct dst_entry *dst, u32 id, diff --git a/net/netlink/attr.c b/net/netlink/attr.c index feb326f..47bbf45 100644 --- a/net/netlink/attr.c +++ b/net/netlink/attr.c @@ -400,13 +400,13 @@ void __nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data) * @attrlen: length of attribute payload * @data: head of attribute payload * - * Returns -1 if the tailroom of the skb is insufficient to store + * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store * the attribute header and payload. */ int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data) { if (unlikely(skb_tailroom(skb) < nla_total_size(attrlen))) - return -1; + return -EMSGSIZE; __nla_put(skb, attrtype, attrlen, data); return 0; @@ -418,13 +418,13 @@ int nla_put(struct sk_buff *skb, int attrtype, int attrlen, const void *data) * @attrlen: length of attribute payload * @data: head of attribute payload * - * Returns -1 if the tailroom of the skb is insufficient to store + * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store * the attribute payload. */ int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data) { if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) - return -1; + return -EMSGSIZE; __nla_put_nohdr(skb, attrlen, data); return 0; @@ -436,13 +436,13 @@ int nla_put_nohdr(struct sk_buff *skb, int attrlen, const void *data) * @attrlen: length of attribute payload * @data: head of attribute payload * - * Returns -1 if the tailroom of the skb is insufficient to store + * Returns -EMSGSIZE if the tailroom of the skb is insufficient to store * the attribute payload. */ int nla_append(struct sk_buff *skb, int attrlen, const void *data) { if (unlikely(skb_tailroom(skb) < NLA_ALIGN(attrlen))) - return -1; + return -EMSGSIZE; memcpy(skb_put(skb, attrlen), data, attrlen); return 0; diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index d16929c..f5aa23c 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -554,7 +554,8 @@ static int ctrl_fill_info(struct genl_family *family, u32 pid, u32 seq, return genlmsg_end(skb, hdr); nla_put_failure: - return genlmsg_cancel(skb, hdr); + genlmsg_cancel(skb, hdr); + return -EMSGSIZE; } static int ctrl_fill_mcgrp_info(struct genl_multicast_group *grp, u32 pid, @@ -590,7 +591,8 @@ static int ctrl_fill_mcgrp_info(struct genl_multicast_group *grp, u32 pid, return genlmsg_end(skb, hdr); nla_put_failure: - return genlmsg_cancel(skb, hdr); + genlmsg_cancel(skb, hdr); + return -EMSGSIZE; } static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb) diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 0df911f..64465ba 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -444,7 +444,8 @@ static int dsmark_dump_class(struct Qdisc *sch, unsigned long cl, return nla_nest_end(skb, opts); nla_put_failure: - return nla_nest_cancel(skb, opts); + nla_nest_cancel(skb, opts); + return -EMSGSIZE; } static int dsmark_dump(struct Qdisc *sch, struct sk_buff *skb) @@ -466,7 +467,8 @@ static int dsmark_dump(struct Qdisc *sch, struct sk_buff *skb) return nla_nest_end(skb, opts); nla_put_failure: - return nla_nest_cancel(skb, opts); + nla_nest_cancel(skb, opts); + return -EMSGSIZE; } static const struct Qdisc_class_ops dsmark_class_ops = { diff --git a/net/sched/sch_gred.c b/net/sched/sch_gred.c index 3a9d226..c89fba5 100644 --- a/net/sched/sch_gred.c +++ b/net/sched/sch_gred.c @@ -582,7 +582,8 @@ append_opt: return nla_nest_end(skb, opts); nla_put_failure: - return nla_nest_cancel(skb, opts); + nla_nest_cancel(skb, opts); + return -EMSGSIZE; } static void gred_destroy(struct Qdisc *sch) diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index 87293d0..fdfaa3f 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1360,7 +1360,7 @@ hfsc_dump_class(struct Qdisc *sch, unsigned long arg, struct sk_buff *skb, nla_put_failure: nla_nest_cancel(skb, nest); - return -1; + return -EMSGSIZE; } static int diff --git a/net/sched/sch_red.c b/net/sched/sch_red.c index 3dcd493..5c56985 100644 --- a/net/sched/sch_red.c +++ b/net/sched/sch_red.c @@ -281,7 +281,8 @@ static int red_dump(struct Qdisc *sch, struct sk_buff *skb) return nla_nest_end(skb, opts); nla_put_failure: - return nla_nest_cancel(skb, opts); + nla_nest_cancel(skb, opts); + return -EMSGSIZE; } static int red_dump_stats(struct Qdisc *sch, struct gnet_dump *d) diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 2bdd4dd..fb75f26 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -187,7 +187,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 pid, u32 seq, int flags, return genlmsg_end(msg, hdr); nla_put_failure: - return genlmsg_cancel(msg, hdr); + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; } static int nl80211_dump_wiphy(struct sk_buff *skb, struct netlink_callback *cb) @@ -273,7 +274,8 @@ static int nl80211_send_iface(struct sk_buff *msg, u32 pid, u32 seq, int flags, return genlmsg_end(msg, hdr); nla_put_failure: - return genlmsg_cancel(msg, hdr); + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; } static int nl80211_dump_interface(struct sk_buff *skb, struct netlink_callback *cb) @@ -928,7 +930,8 @@ static int nl80211_send_station(struct sk_buff *msg, u32 pid, u32 seq, return genlmsg_end(msg, hdr); nla_put_failure: - return genlmsg_cancel(msg, hdr); + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; } static int nl80211_dump_station(struct sk_buff *skb, @@ -1267,7 +1270,8 @@ static int nl80211_send_mpath(struct sk_buff *msg, u32 pid, u32 seq, return genlmsg_end(msg, hdr); nla_put_failure: - return genlmsg_cancel(msg, hdr); + genlmsg_cancel(msg, hdr); + return -EMSGSIZE; } static int nl80211_dump_mpath(struct sk_buff *skb, -- cgit v0.10.2 From ab32cd793dca21eec846a8204390d9594ed994d5 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Tue, 3 Jun 2008 16:37:33 -0700 Subject: route: Remove unused ifa_anycast field The field was supposed to allow the creation of an anycast route by assigning an anycast address to an address prefix. It was never implemented so this field is unused and serves no purpose. Remove it. Signed-off-by: Thomas Graf Signed-off-by: David S. Miller diff --git a/include/linux/inetdevice.h b/include/linux/inetdevice.h index 7009b0c..c6f51ad 100644 --- a/include/linux/inetdevice.h +++ b/include/linux/inetdevice.h @@ -117,7 +117,6 @@ struct in_ifaddr __be32 ifa_address; __be32 ifa_mask; __be32 ifa_broadcast; - __be32 ifa_anycast; unsigned char ifa_scope; unsigned char ifa_flags; unsigned char ifa_prefixlen; diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c index 6848e47..79a7ef6 100644 --- a/net/ipv4/devinet.c +++ b/net/ipv4/devinet.c @@ -90,7 +90,6 @@ static const struct nla_policy ifa_ipv4_policy[IFA_MAX+1] = { [IFA_LOCAL] = { .type = NLA_U32 }, [IFA_ADDRESS] = { .type = NLA_U32 }, [IFA_BROADCAST] = { .type = NLA_U32 }, - [IFA_ANYCAST] = { .type = NLA_U32 }, [IFA_LABEL] = { .type = NLA_STRING, .len = IFNAMSIZ - 1 }, }; @@ -536,9 +535,6 @@ static struct in_ifaddr *rtm_to_ifaddr(struct net *net, struct nlmsghdr *nlh) if (tb[IFA_BROADCAST]) ifa->ifa_broadcast = nla_get_be32(tb[IFA_BROADCAST]); - if (tb[IFA_ANYCAST]) - ifa->ifa_anycast = nla_get_be32(tb[IFA_ANYCAST]); - if (tb[IFA_LABEL]) nla_strlcpy(ifa->ifa_label, tb[IFA_LABEL], IFNAMSIZ); else @@ -745,7 +741,6 @@ int devinet_ioctl(struct net *net, unsigned int cmd, void __user *arg) break; inet_del_ifa(in_dev, ifap, 0); ifa->ifa_broadcast = 0; - ifa->ifa_anycast = 0; ifa->ifa_scope = 0; } @@ -1113,7 +1108,6 @@ static inline size_t inet_nlmsg_size(void) + nla_total_size(4) /* IFA_ADDRESS */ + nla_total_size(4) /* IFA_LOCAL */ + nla_total_size(4) /* IFA_BROADCAST */ - + nla_total_size(4) /* IFA_ANYCAST */ + nla_total_size(IFNAMSIZ); /* IFA_LABEL */ } @@ -1143,9 +1137,6 @@ static int inet_fill_ifaddr(struct sk_buff *skb, struct in_ifaddr *ifa, if (ifa->ifa_broadcast) NLA_PUT_BE32(skb, IFA_BROADCAST, ifa->ifa_broadcast); - if (ifa->ifa_anycast) - NLA_PUT_BE32(skb, IFA_ANYCAST, ifa->ifa_anycast); - if (ifa->ifa_label[0]) NLA_PUT_STRING(skb, IFA_LABEL, ifa->ifa_label); -- cgit v0.10.2 From 378bd6a5211f05d6d8eb3e78a92e2a197e456e4e Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Wed, 4 Jun 2008 12:08:30 +0200 Subject: [ALSA] hda - COMPAL IFL90/JFL-92 laptop quirk Use quirk table to assign ALC268_TOSHIBA to COMPAL IFL90/JFL-92 laptops. No analog output on autoprobe. Signed-off-by: Tony Vroon Tested-by: Guri Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index f46df68..518b7ca 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -10512,6 +10512,7 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST), SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA), SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA), + SND_PCI_QUIRK(0x14c0, 0x0025, "COMPAL IFL90/JFL-92", ALC268_TOSHIBA), SND_PCI_QUIRK(0x152d, 0x0763, "Diverse (CPR2000)", ALC268_ACER), SND_PCI_QUIRK(0x152d, 0x0771, "Quanta IL1", ALC267_QUANTA_IL1), SND_PCI_QUIRK(0x1170, 0x0040, "ZEPTO", ALC268_ZEPTO), -- cgit v0.10.2 From 664d080c41463570b95717b5ad86e79dc1be0877 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Tue, 3 Jun 2008 20:27:59 +0200 Subject: [libata] ACPI: Properly handle bay devices in dock stations * Differentiate between bay devices in dock stations and others: - When an ACPI_NOTIFY_EJECT_REQUEST appears, just signal uevent to userspace (that is when the optional eject button on a bay device is pressed/pulled) giving the possibility to unmount file systems and to clean up. Also, only send uevent in case we get an EJECT_REQUEST without doing anything else. In other cases, you'll get an add/remove event because libata attaches/detaches the device. - In case of a dock event, which in turn signals an ACPI_NOTIFY_EJECT_REQUEST, immediately detach the device, because it may already have been gone * In case of an ACPI_NOTIFY_DEVICE/BUS_CHECK, evaluate _STA to check if the device has been plugged or unplugged. If plugged, hotplug it, if unplugged, just signal event to userspace (initial patch by Matthew Garrett ) * Call ACPI _EJ0 for detached devices Signed-off-by: Holger Macht Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-acpi.c b/drivers/ata/libata-acpi.c index dbf6ca7..3ff8b14 100644 --- a/drivers/ata/libata-acpi.c +++ b/drivers/ata/libata-acpi.c @@ -118,12 +118,62 @@ static void ata_acpi_associate_ide_port(struct ata_port *ap) ap->pflags |= ATA_PFLAG_INIT_GTM_VALID; } -static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device - *dev, u32 event) +static void ata_acpi_eject_device(acpi_handle handle) +{ + struct acpi_object_list arg_list; + union acpi_object arg; + + arg_list.count = 1; + arg_list.pointer = &arg; + arg.type = ACPI_TYPE_INTEGER; + arg.integer.value = 1; + + if (ACPI_FAILURE(acpi_evaluate_object(handle, "_EJ0", + &arg_list, NULL))) + printk(KERN_ERR "Failed to evaluate _EJ0!\n"); +} + +/* @ap and @dev are the same as ata_acpi_handle_hotplug() */ +static void ata_acpi_detach_device(struct ata_port *ap, struct ata_device *dev) +{ + if (dev) + dev->flags |= ATA_DFLAG_DETACH; + else { + struct ata_link *tlink; + struct ata_device *tdev; + + ata_port_for_each_link(tlink, ap) + ata_link_for_each_dev(tdev, tlink) + tdev->flags |= ATA_DFLAG_DETACH; + } + + ata_port_schedule_eh(ap); +} + +/** + * ata_acpi_handle_hotplug - ACPI event handler backend + * @ap: ATA port ACPI event occurred + * @dev: ATA device ACPI event occurred (can be NULL) + * @event: ACPI event which occurred + * @is_dock_event: boolean indicating whether the event was a dock one + * + * All ACPI bay / device realted events end up in this function. If + * the event is port-wide @dev is NULL. If the event is specific to a + * device, @dev points to it. + * + * Hotplug (as opposed to unplug) notification is always handled as + * port-wide while unplug only kills the target device on device-wide + * event. + * + * LOCKING: + * ACPI notify handler context. May sleep. + */ +static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device *dev, + u32 event, int is_dock_event) { char event_string[12]; char *envp[] = { event_string, NULL }; - struct ata_eh_info *ehi; + struct ata_eh_info *ehi = &ap->link.eh_info; struct kobject *kobj = NULL; int wait = 0; unsigned long flags; @@ -131,87 +181,100 @@ static void ata_acpi_handle_hotplug(struct ata_port *ap, struct ata_device unsigned long sta; acpi_status status; - if (!ap) - ap = dev->link->ap; - ehi = &ap->link.eh_info; - - spin_lock_irqsave(ap->lock, flags); - - if (dev) + if (dev) { + if (dev->sdev) + kobj = &dev->sdev->sdev_gendev.kobj; handle = dev->acpi_handle; - else + } else { + kobj = &ap->dev->kobj; handle = ap->acpi_handle; + } status = acpi_get_handle(handle, "_EJ0", &tmphandle); - if (ACPI_FAILURE(status)) { - /* This device is not ejectable */ - spin_unlock_irqrestore(ap->lock, flags); + if (ACPI_FAILURE(status)) + /* This device does not support hotplug */ return; - } - status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); - if (ACPI_FAILURE(status)) { - printk ("Unable to determine bay status\n"); - spin_unlock_irqrestore(ap->lock, flags); - return; - } + spin_lock_irqsave(ap->lock, flags); switch (event) { case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: ata_ehi_push_desc(ehi, "ACPI event"); - if (!sta) { - /* Device has been unplugged */ - if (dev) - dev->flags |= ATA_DFLAG_DETACH; - else { - struct ata_link *tlink; - struct ata_device *tdev; - - ata_port_for_each_link(tlink, ap) { - ata_link_for_each_dev(tdev, tlink) { - tdev->flags |= - ATA_DFLAG_DETACH; - } - } - } - ata_port_schedule_eh(ap); - wait = 1; - } else { + + status = acpi_evaluate_integer(handle, "_STA", NULL, &sta); + if (ACPI_FAILURE(status)) { + ata_port_printk(ap, KERN_ERR, + "acpi: failed to determine bay status (0x%x)\n", + status); + break; + } + + if (sta) { ata_ehi_hotplugged(ehi); ata_port_freeze(ap); + } else { + /* The device has gone - unplug it */ + ata_acpi_detach_device(ap, dev); + wait = 1; } + break; + case ACPI_NOTIFY_EJECT_REQUEST: + ata_ehi_push_desc(ehi, "ACPI event"); + + if (!is_dock_event) + break; + + /* undock event - immediate unplug */ + ata_acpi_detach_device(ap, dev); + wait = 1; + break; } + /* make sure kobj doesn't go away while ap->lock is released */ + kobject_get(kobj); + spin_unlock_irqrestore(ap->lock, flags); - if (wait) + if (wait) { ata_port_wait_eh(ap); + ata_acpi_eject_device(handle); + } - if (dev) { - if (dev->sdev) - kobj = &dev->sdev->sdev_gendev.kobj; - } else - kobj = &ap->dev->kobj; - - if (kobj) { + if (kobj && !is_dock_event) { sprintf(event_string, "BAY_EVENT=%d", event); kobject_uevent_env(kobj, KOBJ_CHANGE, envp); } + + kobject_put(kobj); +} + +static void ata_acpi_dev_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_device *dev = data; + + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 1); +} + +static void ata_acpi_ap_notify_dock(acpi_handle handle, u32 event, void *data) +{ + struct ata_port *ap = data; + + ata_acpi_handle_hotplug(ap, NULL, event, 1); } static void ata_acpi_dev_notify(acpi_handle handle, u32 event, void *data) { struct ata_device *dev = data; - ata_acpi_handle_hotplug(NULL, dev, event); + ata_acpi_handle_hotplug(dev->link->ap, dev, event, 0); } static void ata_acpi_ap_notify(acpi_handle handle, u32 event, void *data) { struct ata_port *ap = data; - ata_acpi_handle_hotplug(ap, NULL, event); + ata_acpi_handle_hotplug(ap, NULL, event, 0); } /** @@ -252,7 +315,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_ap_notify, ap); /* we might be on a docking station */ register_hotplug_dock_device(ap->acpi_handle, - ata_acpi_ap_notify, ap); + ata_acpi_ap_notify_dock, ap); } for (j = 0; j < ata_link_max_devices(&ap->link); j++) { @@ -264,7 +327,7 @@ void ata_acpi_associate(struct ata_host *host) ata_acpi_dev_notify, dev); /* we might be on a docking station */ register_hotplug_dock_device(dev->acpi_handle, - ata_acpi_dev_notify, dev); + ata_acpi_dev_notify_dock, dev); } } } -- cgit v0.10.2 From e1fefea9cc4bc231b5c23fe19e3682fe061dc097 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 3 Jun 2008 18:59:02 +0200 Subject: [libata] ata_piix: more acer short cable quirks Add ICH6 on ACER Aspire 1694WLMi to list of laptops that use short cables rather than 80 wire OriginalAuthor: Tiago Sousa OriginalLocation: http://launchpadlibrarian.net/11627664/new.ich_laptop.short.cables.diff Bug: #187121 Signed-off-by: Colin Ian King Signed-off-by: maximilian attems Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 3548ee7..81b7ae3 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -574,6 +574,8 @@ static const struct ich_laptop ich_laptop[] = { { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */ { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */ { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on ACER Aspire 2023WLMi */ + { 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */ + { 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */ { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */ /* end marker */ { 0, } -- cgit v0.10.2 From ba069e376cc0801cd28352ca5986ce20413acb21 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Sat, 31 May 2008 16:46:34 -0400 Subject: sata_mv: PHY_MODE4 cleanups The handling for PHY_MODE4 was originally just cloned from the Marvell proprietary driver (with their blessing). But we can do better than that. Tidy things up with some judicious mask definitions, to improve maintainability. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index acf347f..60391e9 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -224,6 +224,11 @@ enum { PHY_MODE3 = 0x310, PHY_MODE4 = 0x314, + PHY_MODE4_CFG_MASK = 0x00000003, /* phy internal config field */ + PHY_MODE4_CFG_VALUE = 0x00000001, /* phy internal config field */ + PHY_MODE4_RSVD_ZEROS = 0x5de3fffa, /* Gen2e always write zeros */ + PHY_MODE4_RSVD_ONES = 0x00000005, /* Gen2e always write ones */ + PHY_MODE2 = 0x330, SATA_IFCTL_OFS = 0x344, SATA_TESTCTL_OFS = 0x348, @@ -2563,17 +2568,16 @@ static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, m3 &= ~0x1c; if (fix_phy_mode4) { - u32 m4; - - m4 = readl(port_mmio + PHY_MODE4); - - /* workaround for errata FEr SATA#10 (part 1) */ - m4 = (m4 & ~(1 << 1)) | (1 << 0); - - /* enforce bit restrictions on GenIIe devices */ + u32 m4 = readl(port_mmio + PHY_MODE4); + /* + * Enforce reserved-bit restrictions on GenIIe devices only. + * For earlier chipsets, force only the internal config field + * (workaround for errata FEr SATA#10 part 1). + */ if (IS_GEN_IIE(hpriv)) - m4 = (m4 & ~0x5DE3FFFC) | (1 << 2); - + m4 = (m4 & ~PHY_MODE4_RSVD_ZEROS) | PHY_MODE4_RSVD_ONES; + else + m4 = (m4 & ~PHY_MODE4_CFG_MASK) | PHY_MODE4_CFG_VALUE; writel(m4, port_mmio + PHY_MODE4); } /* -- cgit v0.10.2 From 4f0ebe3cc57f18ba26317b56b80b108c2848b1de Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 20 May 2008 02:17:50 +0900 Subject: libata: kill unused constants Kill a few unused constants. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/include/linux/libata.h b/include/linux/libata.h index 4a92fba..93e2b89 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -111,13 +111,10 @@ enum { /* various global constants */ LIBATA_MAX_PRD = ATA_MAX_PRD / 2, LIBATA_DUMB_MAX_PRD = ATA_MAX_PRD / 4, /* Worst case */ - ATA_MAX_PORTS = 8, ATA_DEF_QUEUE = 1, /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */ ATA_MAX_QUEUE = 32, ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1, - ATA_MAX_BUS = 2, - ATA_DEF_BUSY_WAIT = 10000, ATA_SHORT_PAUSE = (HZ >> 6) + 1, ATAPI_MAX_DRAIN = 16 << 10, -- cgit v0.10.2 From a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 29 May 2008 22:10:58 +0100 Subject: libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl - Make ata_sff_altstatus private so nobody uses it by mistake - Drop the 400nS delay from it Add ata_sff_irq_status - encapsulates the IRQ check logic This function keeps the existing behaviour for altstatus using devices. I actually suspect the logic was wrong before the changes but -rc isn't the time to play with that ata_sff_sync - ensure writes hit the device Really we want an io* operation for 'is posted' eg ioisposted(ioaddr) so that we can fix the nasty delay this causes on most systems. - ata_sff_pause - 400nS delay Ensure the command hit the device and delay 400nS - ata_sff_dma_pause Ensure the I/O hit the device and enforce an HDMA1:0 transition delay. Requires altstatus register exists, BUG if not so we don't risk corruption in MWDMA modes. (UDMA the checksum will save your backside in theory) The only other complication then is devices with their own handlers. rb532 can use dma_pause but scc needs to access its own altstatus register for internal errata workarounds so directly call the drivers own altstatus function. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 3c2d228..90d20c6 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -247,7 +247,7 @@ u8 ata_sff_check_status(struct ata_port *ap) * LOCKING: * Inherited from caller. */ -u8 ata_sff_altstatus(struct ata_port *ap) +static u8 ata_sff_altstatus(struct ata_port *ap) { if (ap->ops->sff_check_altstatus) return ap->ops->sff_check_altstatus(ap); @@ -256,6 +256,93 @@ u8 ata_sff_altstatus(struct ata_port *ap) } /** + * ata_sff_irq_status - Check if the device is busy + * @ap: port where the device is + * + * Determine if the port is currently busy. Uses altstatus + * if available in order to avoid clearing shared IRQ status + * when finding an IRQ source. Non ctl capable devices don't + * share interrupt lines fortunately for us. + * + * LOCKING: + * Inherited from caller. + */ +static u8 ata_sff_irq_status(struct ata_port *ap) +{ + u8 status; + + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + status = ata_sff_altstatus(ap); + /* Not us: We are busy */ + if (status & ATA_BUSY) + return status; + } + /* Clear INTRQ latch */ + status = ata_sff_check_status(ap); + return status; +} + +/** + * ata_sff_sync - Flush writes + * @ap: Port to wait for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +static void ata_sff_sync(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus) + ap->ops->sff_check_altstatus(ap); + else if (ap->ioaddr.altstatus_addr) + ioread8(ap->ioaddr.altstatus_addr); +} + +/** + * ata_sff_pause - Flush writes and wait 400nS + * @ap: Port to pause for. + * + * CAUTION: + * If we have an mmio device with no ctl and no altstatus + * method this will fail. No such devices are known to exist. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sff_pause(struct ata_port *ap) +{ + ata_sff_sync(ap); + ndelay(400); +} + +/** + * ata_sff_dma_pause - Pause before commencing DMA + * @ap: Port to pause for. + * + * Perform I/O fencing and ensure sufficient cycle delays occur + * for the HDMA1:0 transition + */ + +void ata_sff_dma_pause(struct ata_port *ap) +{ + if (ap->ops->sff_check_altstatus || ap->ioaddr.altstatus_addr) { + /* An altstatus read will cause the needed delay without + messing up the IRQ status */ + ata_sff_altstatus(ap); + return; + } + /* There are no DMA controllers without ctl. BUG here to ensure + we never violate the HDMA1:0 transition timing and risk + corruption. */ + BUG(); +} + +/** * ata_sff_busy_sleep - sleep until BSY clears, or timeout * @ap: port containing status register to be polled * @tmout_pat: impatience timeout @@ -742,7 +829,7 @@ static void ata_pio_sectors(struct ata_queued_cmd *qc) } else ata_pio_sector(qc); - ata_sff_altstatus(qc->ap); /* flush */ + ata_sff_sync(qc->ap); /* flush */ } /** @@ -763,8 +850,9 @@ static void atapi_send_cdb(struct ata_port *ap, struct ata_queued_cmd *qc) WARN_ON(qc->dev->cdb_len < 12); ap->ops->sff_data_xfer(qc->dev, qc->cdb, qc->dev->cdb_len, 1); - ata_sff_altstatus(ap); /* flush */ - + ata_sff_sync(ap); + /* FIXME: If the CDB is for DMA do we need to do the transition delay + or is bmdma_start guaranteed to do it ? */ switch (qc->tf.protocol) { case ATAPI_PROT_PIO: ap->hsm_task_state = HSM_ST; @@ -905,7 +993,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc) if (unlikely(__atapi_pio_bytes(qc, bytes))) goto err_out; - ata_sff_altstatus(ap); /* flush */ + ata_sff_sync(ap); /* flush */ return; @@ -1489,14 +1577,10 @@ inline unsigned int ata_sff_host_intr(struct ata_port *ap, goto idle_irq; } - /* check altstatus */ - status = ata_sff_altstatus(ap); - if (status & ATA_BUSY) - goto idle_irq; - /* check main status, clearing INTRQ */ - status = ap->ops->sff_check_status(ap); - if (unlikely(status & ATA_BUSY)) + /* check main status, clearing INTRQ if needed */ + status = ata_sff_irq_status(ap); + if (status & ATA_BUSY) goto idle_irq; /* ack bmdma irq events */ @@ -2030,7 +2114,7 @@ void ata_sff_error_handler(struct ata_port *ap) ap->ops->bmdma_stop(qc); } - ata_sff_altstatus(ap); + ata_sff_sync(ap); /* FIXME: We don't need this */ ap->ops->sff_check_status(ap); ap->ops->sff_irq_clear(ap); @@ -2203,7 +2287,7 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc) mmio + ATA_DMA_CMD); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); } /** @@ -2722,7 +2806,8 @@ EXPORT_SYMBOL_GPL(ata_sff_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dumb_qc_prep); EXPORT_SYMBOL_GPL(ata_sff_dev_select); EXPORT_SYMBOL_GPL(ata_sff_check_status); -EXPORT_SYMBOL_GPL(ata_sff_altstatus); +EXPORT_SYMBOL_GPL(ata_sff_dma_pause); +EXPORT_SYMBOL_GPL(ata_sff_pause); EXPORT_SYMBOL_GPL(ata_sff_busy_sleep); EXPORT_SYMBOL_GPL(ata_sff_wait_ready); EXPORT_SYMBOL_GPL(ata_sff_tf_load); diff --git a/drivers/ata/pata_icside.c b/drivers/ata/pata_icside.c index 1713843..cf9e984 100644 --- a/drivers/ata/pata_icside.c +++ b/drivers/ata/pata_icside.c @@ -270,7 +270,7 @@ static void pata_icside_bmdma_stop(struct ata_queued_cmd *qc) disable_dma(state->dma); /* see ata_bmdma_stop */ - ata_sff_altstatus(ap); + ata_sff_dma_pause(ap); } static u8 pata_icside_bmdma_status(struct ata_port *ap) diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index a108d25..f8b3ffc 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -57,7 +57,9 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) struct ata_host *ah = ap->host; struct rb532_cf_info *info = ah->private_data; - ata_sff_altstatus(ap); + /* FIXME: Keep previous delay. If this is merely a fence then + ata_sff_sync might be sufficient. */ + ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index e965b25..bbf5aa3 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -726,7 +726,7 @@ static void scc_bmdma_stop (struct ata_queued_cmd *qc) in_be32(bmid_base + SCC_DMA_CMD) & ~ATA_DMA_START); /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ - ata_sff_altstatus(ap); /* dummy read */ + ata_sff_dma_pause(ap); /* dummy read */ } /** @@ -747,7 +747,8 @@ static u8 scc_bmdma_status (struct ata_port *ap) return host_stat; /* errata A252,A308 workaround: Step4 */ - if ((ata_sff_altstatus(ap) & ATA_ERR) && (int_status & INTSTS_INTRQ)) + if ((scc_check_altstatus(ap) & ATA_ERR) + && (int_status & INTSTS_INTRQ)) return (host_stat | ATA_DMA_INTR); /* errata A308 workaround Step5 */ diff --git a/include/linux/libata.h b/include/linux/libata.h index 93e2b89..e57e5d0 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1432,7 +1432,8 @@ extern void ata_sff_qc_prep(struct ata_queued_cmd *qc); extern void ata_sff_dumb_qc_prep(struct ata_queued_cmd *qc); extern void ata_sff_dev_select(struct ata_port *ap, unsigned int device); extern u8 ata_sff_check_status(struct ata_port *ap); -extern u8 ata_sff_altstatus(struct ata_port *ap); +extern void ata_sff_pause(struct ata_port *ap); +extern void ata_sff_dma_pause(struct ata_port *ap); extern int ata_sff_busy_sleep(struct ata_port *ap, unsigned long timeout_pat, unsigned long timeout); extern int ata_sff_wait_ready(struct ata_link *link, unsigned long deadline); @@ -1493,19 +1494,6 @@ extern int ata_pci_sff_init_one(struct pci_dev *pdev, #endif /* CONFIG_PCI */ /** - * ata_sff_pause - Flush writes and pause 400 nanoseconds. - * @ap: Port to wait for. - * - * LOCKING: - * Inherited from caller. - */ -static inline void ata_sff_pause(struct ata_port *ap) -{ - ata_sff_altstatus(ap); - ndelay(400); -} - -/** * ata_sff_busy_wait - Wait for a port status register * @ap: Port to wait for. * @bits: bits that must be clear -- cgit v0.10.2 From fb3bbd6a663fe972611676381adc4c60ddfe61ac Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Thu, 22 May 2008 18:22:30 -0700 Subject: x86: fix APIC warning on 32bit v2 for http://bugzilla.kernel.org/show_bug.cgi?id=10613 BIOS bug, APIC version is 0 for CPU#0! fixing up to 0x10. (tell your hw vendor) v2: fix 64 bit compilation Signed-off-by: Yinghai Lu Cc: Andrew Morton Cc: "Rafael J. Wysocki" Cc: Gabriel C Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index c49ebcc..33c5216 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -242,12 +242,19 @@ static int __init acpi_parse_madt(struct acpi_table_header *table) static void __cpuinit acpi_register_lapic(int id, u8 enabled) { + unsigned int ver = 0; + if (!enabled) { ++disabled_cpus; return; } - generic_processor_info(id, 0); +#ifdef CONFIG_X86_32 + if (boot_cpu_physical_apicid != -1U) + ver = apic_version[boot_cpu_physical_apicid]; +#endif + + generic_processor_info(id, ver); } static int __init @@ -767,8 +774,13 @@ static void __init acpi_register_lapic_address(unsigned long address) mp_lapic_addr = address; set_fixmap_nocache(FIX_APIC_BASE, address); - if (boot_cpu_physical_apicid == -1U) + if (boot_cpu_physical_apicid == -1U) { boot_cpu_physical_apicid = GET_APIC_ID(read_apic_id()); +#ifdef CONFIG_X86_32 + apic_version[boot_cpu_physical_apicid] = + GET_APIC_VERSION(apic_read(APIC_LVR)); +#endif + } } static int __init early_acpi_parse_madt_lapic_addr_ovr(void) -- cgit v0.10.2 From deef325086c3897393b8f7d6bccd03405244fe18 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 12 May 2008 15:44:38 +0200 Subject: x86: disable preemption in native_smp_prepare_cpus Priit Laes reported the following warning: Call Trace: [] warn_on_slowpath+0x51/0x63 [] sys_ioctl+0x2d/0x5d [] _spin_lock+0xe/0x24 [] task_rq_lock+0x3d/0x73 [] set_cpu_sibling_map+0x336/0x350 [] read_apic_id+0x30/0x62 [] verify_local_APIC+0x90/0x138 [] native_smp_prepare_cpus+0x1f9/0x305 [] kernel_init+0x59/0x2d9 [] _spin_unlock_irq+0x11/0x2b [] child_rip+0xa/0x12 [] kernel_init+0x0/0x2d9 [] child_rip+0x0/0x12 fix this by generally disabling preemption in native_smp_prepare_cpus(). Reported-and-bisected-by: Priit Laes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 3898849..56078d6 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -1190,6 +1190,7 @@ static void __init smp_cpu_index_default(void) */ void __init native_smp_prepare_cpus(unsigned int max_cpus) { + preempt_disable(); nmi_watchdog_default(); smp_cpu_index_default(); current_cpu_data = boot_cpu_data; @@ -1206,7 +1207,7 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) if (smp_sanity_check(max_cpus) < 0) { printk(KERN_INFO "SMP disabled\n"); disable_smp(); - return; + goto out; } preempt_disable(); @@ -1246,6 +1247,8 @@ void __init native_smp_prepare_cpus(unsigned int max_cpus) printk(KERN_INFO "CPU%d: ", 0); print_cpu_info(&cpu_data(0)); setup_boot_clock(); +out: + preempt_enable(); } /* * Early setup to make printk work. -- cgit v0.10.2 From 5c1ea08215f1f830dfaf4819a5f22efca41c3832 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Sun, 25 May 2008 11:13:32 -0400 Subject: x86: enable preemption in delay The RT team has been searching for a nasty latency. This latency shows up out of the blue and has been seen to be as big as 5ms! Using ftrace I found the cause of the latency. pcscd-2995 3dNh1 52360300us : irq_exit (smp_apic_timer_interrupt) pcscd-2995 3dN.2 52360301us : idle_cpu (irq_exit) pcscd-2995 3dN.2 52360301us : rcu_irq_exit (irq_exit) pcscd-2995 3dN.1 52360771us : smp_apic_timer_interrupt (apic_timer_interrupt ) pcscd-2995 3dN.1 52360771us : exit_idle (smp_apic_timer_interrupt) Here's an example of a 400 us latency. pcscd took a timer interrupt and returned with "need resched" enabled, but did not reschedule until after the next interrupt came in at 52360771us 400us later! At first I thought we somehow missed a preemption check in entry.S. But I also noticed that this always seemed to happen during a __delay call. pcscd-2995 3dN.2 52360836us : rcu_irq_exit (irq_exit) pcscd-2995 3.N.. 52361265us : preempt_schedule (__delay) Looking at the x86 delay, I found my problem. In git commit 35d5d08a085c56f153458c3f5d8ce24123617faf, Andrew Morton placed preempt_disable around the entire delay due to TSC's not working nicely on SMP. Unfortunately for those that care about latencies this is devastating! Especially when we have callers to mdelay(8). Here I enable preemption during the loop and account for anytime the task migrates to a new CPU. The delay asked for may be extended a bit by the migration, but delay only guarantees that it will delay for that minimum time. Delaying longer should not be an issue. [ Thanks to Thomas Gleixner for spotting that cpu wasn't updated, and to place the rep_nop between preempt_enabled/disable. ] Signed-off-by: Steven Rostedt Cc: akpm@osdl.org Cc: Clark Williams Cc: Peter Zijlstra Cc: "Luis Claudio R. Goncalves" Cc: Gregory Haskins Cc: Linus Torvalds Cc: Andi Kleen Signed-off-by: Thomas Gleixner diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay_32.c index 4535e6d..d710f2d 100644 --- a/arch/x86/lib/delay_32.c +++ b/arch/x86/lib/delay_32.c @@ -44,13 +44,36 @@ static void delay_loop(unsigned long loops) static void delay_tsc(unsigned long loops) { unsigned long bclock, now; + int cpu; - preempt_disable(); /* TSC's are per-cpu */ + preempt_disable(); + cpu = smp_processor_id(); rdtscl(bclock); - do { - rep_nop(); + for (;;) { rdtscl(now); - } while ((now-bclock) < loops); + if ((now - bclock) >= loops) + break; + + /* Allow RT tasks to run */ + preempt_enable(); + rep_nop(); + preempt_disable(); + + /* + * It is possible that we moved to another CPU, and + * since TSC's are per-cpu we need to calculate + * that. The delay must guarantee that we wait "at + * least" the amount of time. Being moved to another + * CPU could make the wait longer but we just need to + * make sure we waited long enough. Rebalance the + * counter for this CPU. + */ + if (unlikely(cpu != smp_processor_id())) { + loops -= (now - bclock); + cpu = smp_processor_id(); + rdtscl(bclock); + } + } preempt_enable(); } diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c index bbc6105..4c441be 100644 --- a/arch/x86/lib/delay_64.c +++ b/arch/x86/lib/delay_64.c @@ -31,14 +31,36 @@ int __devinit read_current_timer(unsigned long *timer_value) void __delay(unsigned long loops) { unsigned bclock, now; + int cpu; - preempt_disable(); /* TSC's are pre-cpu */ + preempt_disable(); + cpu = smp_processor_id(); rdtscl(bclock); - do { - rep_nop(); + for (;;) { rdtscl(now); + if ((now - bclock) >= loops) + break; + + /* Allow RT tasks to run */ + preempt_enable(); + rep_nop(); + preempt_disable(); + + /* + * It is possible that we moved to another CPU, and + * since TSC's are per-cpu we need to calculate + * that. The delay must guarantee that we wait "at + * least" the amount of time. Being moved to another + * CPU could make the wait longer but we just need to + * make sure we waited long enough. Rebalance the + * counter for this CPU. + */ + if (unlikely(cpu != smp_processor_id())) { + loops -= (now - bclock); + cpu = smp_processor_id(); + rdtscl(bclock); + } } - while ((now-bclock) < loops); preempt_enable(); } EXPORT_SYMBOL(__delay); -- cgit v0.10.2 From e8a496ac8cd00cabbdaa373db4818a9ad19a1c5a Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 23 May 2008 16:26:37 -0700 Subject: x86: fix broken math-emu with lazy allocation of fpu area Fix the math emulation that got broken with the recent lazy allocation of FPU area. init_fpu() need to be added for the math-emulation path aswell for the FPU area allocation. math emulation enabled kernel booted fine with this, in the presence of "no387 nofxsr" boot param. Signed-off-by: Suresh Siddha Cc: hpa@zytor.com Cc: mingo@elte.hu Signed-off-by: Thomas Gleixner diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index e03cc95..eb9ddd8 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -56,6 +56,11 @@ void __cpuinit mxcsr_feature_mask_init(void) void __init init_thread_xstate(void) { + if (!HAVE_HWFP) { + xstate_size = sizeof(struct i387_soft_struct); + return; + } + if (cpu_has_fxsr) xstate_size = sizeof(struct i387_fxsave_struct); #ifdef CONFIG_X86_32 @@ -94,7 +99,7 @@ void __cpuinit fpu_init(void) int init_fpu(struct task_struct *tsk) { if (tsk_used_math(tsk)) { - if (tsk == current) + if (HAVE_HWFP && tsk == current) unlazy_fpu(tsk); return 0; } @@ -109,6 +114,15 @@ int init_fpu(struct task_struct *tsk) return -ENOMEM; } +#ifdef CONFIG_X86_32 + if (!HAVE_HWFP) { + memset(tsk->thread.xstate, 0, xstate_size); + finit(); + set_stopped_child_used_math(tsk); + return 0; + } +#endif + if (cpu_has_fxsr) { struct i387_fxsave_struct *fx = &tsk->thread.xstate->fxsave; @@ -330,13 +344,13 @@ int fpregs_get(struct task_struct *target, const struct user_regset *regset, struct user_i387_ia32_struct env; int ret; - if (!HAVE_HWFP) - return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf); - ret = init_fpu(target); if (ret) return ret; + if (!HAVE_HWFP) + return fpregs_soft_get(target, regset, pos, count, kbuf, ubuf); + if (!cpu_has_fxsr) { return user_regset_copyout(&pos, &count, &kbuf, &ubuf, &target->thread.xstate->fsave, 0, @@ -360,15 +374,15 @@ int fpregs_set(struct task_struct *target, const struct user_regset *regset, struct user_i387_ia32_struct env; int ret; - if (!HAVE_HWFP) - return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); - ret = init_fpu(target); if (ret) return ret; set_stopped_child_used_math(target); + if (!HAVE_HWFP) + return fpregs_soft_set(target, regset, pos, count, kbuf, ubuf); + if (!cpu_has_fxsr) { return user_regset_copyin(&pos, &count, &kbuf, &ubuf, &target->thread.xstate->fsave, 0, -1); @@ -474,18 +488,18 @@ static int restore_i387_fxsave(struct _fpstate_ia32 __user *buf) int restore_i387_ia32(struct _fpstate_ia32 __user *buf) { int err; + struct task_struct *tsk = current; - if (HAVE_HWFP) { - struct task_struct *tsk = current; - + if (HAVE_HWFP) clear_fpu(tsk); - if (!used_math()) { - err = init_fpu(tsk); - if (err) - return err; - } + if (!used_math()) { + err = init_fpu(tsk); + if (err) + return err; + } + if (HAVE_HWFP) { if (cpu_has_fxsr) err = restore_i387_fxsave(buf); else diff --git a/arch/x86/math-emu/fpu_entry.c b/arch/x86/math-emu/fpu_entry.c index 6e38d87..c7b06fe 100644 --- a/arch/x86/math-emu/fpu_entry.c +++ b/arch/x86/math-emu/fpu_entry.c @@ -30,6 +30,7 @@ #include #include #include +#include #include "fpu_system.h" #include "fpu_emu.h" @@ -146,6 +147,13 @@ asmlinkage void math_emulate(long arg) unsigned long code_limit = 0; /* Initialized to stop compiler warnings */ struct desc_struct code_descriptor; + if (!used_math()) { + if (init_fpu(current)) { + do_group_exit(SIGKILL); + return; + } + } + #ifdef RE_ENTRANT_CHECKING if (emulating) { printk("ERROR: wm-FPU-emu is not RE-ENTRANT!\n"); @@ -153,11 +161,6 @@ asmlinkage void math_emulate(long arg) RE_ENTRANT_CHECK_ON; #endif /* RE_ENTRANT_CHECKING */ - if (!used_math()) { - finit(); - set_used_math(); - } - SETUP_DATA_AREA(arg); FPU_ORIG_EIP = FPU_EIP; diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 6b722d3..37672f7 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -193,6 +193,8 @@ static inline int restore_i387(struct _fpstate __user *buf) #else /* CONFIG_X86_32 */ +extern void finit(void); + static inline void tolerant_fwait(void) { asm volatile("fnclex ; fwait"); -- cgit v0.10.2 From 226e9a93a253b7d8811b5ed9ac671c6c5a728022 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 27 May 2008 09:56:49 +0200 Subject: x86: ioremap fix failing nesting check Mika Kukkonen noticed that the nesting check in early_iounmap() is not actually done. Reported-by: Mika Kukkonen Signed-off-by: Ingo Molnar Cc: torvalds@linux-foundation.org Cc: arjan@linux.intel.com Cc: mikukkon@iki.fi Signed-off-by: Thomas Gleixner diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 71bb315..2b2bb3f 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -593,10 +593,11 @@ void __init early_iounmap(void *addr, unsigned long size) unsigned long offset; unsigned int nrpages; enum fixed_addresses idx; - unsigned int nesting; + int nesting; nesting = --early_ioremap_nested; - WARN_ON(nesting < 0); + if (WARN_ON(nesting < 0)) + return; if (early_ioremap_debug) { printk(KERN_INFO "early_iounmap(%p, %08lx) [%d]\n", addr, -- cgit v0.10.2 From 2884f110d5409714f3a04eeb6d2ecd77da66b242 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 28 May 2008 19:36:07 +0100 Subject: x86: fix bad pmd ffff810000207xxx(9090909090909090) OGAWA Hirofumi and Fede have reported rare pmd_ERROR messages: mm/memory.c:127: bad pmd ffff810000207xxx(9090909090909090). Initialization's cleanup_highmap was leaving alignment filler behind in the pmd for MODULES_VADDR: when vmalloc's guard page would occupy a new page table, it's not allocated, and then module unload's vfree hits the bad 9090 pmd entry left over. Signed-off-by: Hugh Dickins Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 32ba13b..998a06e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -206,7 +206,7 @@ void __init cleanup_highmap(void) pmd_t *last_pmd = pmd + PTRS_PER_PMD; for (; pmd < last_pmd; pmd++, vaddr += PMD_SIZE) { - if (!pmd_present(*pmd)) + if (pmd_none(*pmd)) continue; if (vaddr < (unsigned long) _text || vaddr > end) set_pmd(pmd, __pmd(0)); -- cgit v0.10.2 From 511631011d39706ac81ee5e4c9084d61e5b4fd34 Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Thu, 29 May 2008 21:14:35 -0300 Subject: x86: fix pointer type warning in arch/x86/mm/init_64.c:early_memtest Changed the call to find_e820_area_size to pass u64 instead of unsigned long. Signed-off-by: Kevin Winchester Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 998a06e..156e6d7 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - unsigned long t_start, t_size; + u64 t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016lx - %016lx pattern %d", + printk(KERN_CONT "\n %016llx - %016llx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From 282c454cd3a7041f59a37112bb2f82263bc38f6c Mon Sep 17 00:00:00 2001 From: Venki Pallipadi Date: Thu, 29 May 2008 12:01:44 -0700 Subject: x86: fix Xorg crash with xf86MapVidMem error Clarify the usage of mtrr_lookup() in PAT code, and to make PAT code resilient to mtrr lookup problems. Specifically, pat_x_mtrr_type() is restructured to highlight, under what conditions we look for mtrr hint. pat_x_mtrr_type() uses a default type when there are any errors in mtrr lookup (still maintaining the pat consistency). And, reserve_memtype() highlights its usage ot mtrr_lookup for request type of '-1' and also defaults in a sane way on any mtrr lookup failure. pat.c looks at mtrr type of a range to get a hint on what mapping type to request when user/API: (1) hasn't specified any type (/dev/mem mapping) and we do not want to take performance hit by always mapping UC_MINUS. This will be the case for /dev/mem mappings used to map BIOS area or ACPI region which are WB'able. In this case, as long as MTRR is not WB, PAT will request UC_MINUS for such mappings. (2) user/API requests WB mapping while in reality MTRR may have UC or WC. In this case, PAT can map as WB (without checking MTRR) and still effective type will be UC or WC. But, a subsequent request to map same region as UC or WC may fail, as the region will get trackked as WB in PAT list. Looking at MTRR hint helps us to track based on effective type rather than what user requested. Again, here mtrr_lookup is only used as hint and we fallback to WB mapping (as requested by user) as default. In both cases, after using the mtrr hint, we still go through the memtype list to make sure there are no inconsistencies among multiple users. Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Tested-by: Rufus & Azrael Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index de3a998..183fdd3 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -151,32 +151,33 @@ static int pat_x_mtrr_type(u64 start, u64 end, unsigned long prot, unsigned long pat_type; u8 mtrr_type; - mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == 0xFF) { /* MTRR not enabled */ - *ret_prot = prot; - return 0; - } - if (mtrr_type == 0xFE) { /* MTRR match error */ - *ret_prot = _PAGE_CACHE_UC; - return -1; - } - if (mtrr_type != MTRR_TYPE_UNCACHABLE && - mtrr_type != MTRR_TYPE_WRBACK && - mtrr_type != MTRR_TYPE_WRCOMB) { /* MTRR type unhandled */ - *ret_prot = _PAGE_CACHE_UC; - return -1; - } - pat_type = prot & _PAGE_CACHE_MASK; prot &= (~_PAGE_CACHE_MASK); - /* Currently doing intersection by hand. Optimize it later. */ + /* + * We return the PAT request directly for types where PAT takes + * precedence with respect to MTRR and for UC_MINUS. + * Consistency checks with other PAT requests is done later + * while going through memtype list. + */ if (pat_type == _PAGE_CACHE_WC) { *ret_prot = prot | _PAGE_CACHE_WC; + return 0; } else if (pat_type == _PAGE_CACHE_UC_MINUS) { *ret_prot = prot | _PAGE_CACHE_UC_MINUS; - } else if (pat_type == _PAGE_CACHE_UC || - mtrr_type == MTRR_TYPE_UNCACHABLE) { + return 0; + } else if (pat_type == _PAGE_CACHE_UC) { + *ret_prot = prot | _PAGE_CACHE_UC; + return 0; + } + + /* + * Look for MTRR hint to get the effective type in case where PAT + * request is for WB. + */ + mtrr_type = mtrr_type_lookup(start, end); + + if (mtrr_type == MTRR_TYPE_UNCACHABLE) { *ret_prot = prot | _PAGE_CACHE_UC; } else if (mtrr_type == MTRR_TYPE_WRCOMB) { *ret_prot = prot | _PAGE_CACHE_WC; @@ -233,14 +234,12 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, if (req_type == -1) { /* - * Special case where caller wants to inherit from mtrr or - * existing pat mapping, defaulting to UC_MINUS in case of - * no match. + * Call mtrr_lookup to get the type hint. This is an + * optimization for /dev/mem mmap'ers into WB memory (BIOS + * tools and ACPI tools). Use WB request for WB memory and use + * UC_MINUS otherwise. */ u8 mtrr_type = mtrr_type_lookup(start, end); - if (mtrr_type == 0xFE) { /* MTRR match error */ - err = -1; - } if (mtrr_type == MTRR_TYPE_WRBACK) { req_type = _PAGE_CACHE_WB; -- cgit v0.10.2 From be524fb96081e9e511d993ebf39b05a32b19476e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 29 May 2008 00:01:28 -0700 Subject: x86: section mismatch fix Fix this: WARNING: vmlinux.o(.text+0x114bb): Section mismatch in reference from the function nopat() to the function .cpuinit.text:pat_disable() The function nopat() references the function __cpuinit pat_disable(). This is often because nopat lacks a __cpuinit annotation or the annotation of pat_disable is wrong. Reported-by: "Fabio Comolli" Cc: Sam Ravnborg Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 183fdd3..06b7a1c 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -34,7 +34,7 @@ void __cpuinit pat_disable(char *reason) printk(KERN_INFO "%s\n", reason); } -static int nopat(char *str) +static int __init nopat(char *str) { pat_disable("PAT support disabled."); return 0; -- cgit v0.10.2 From cd76374e9de4501acc74f833dc6cb5e7a5dca115 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Thu, 29 May 2008 00:30:21 -0700 Subject: suspend-vs-iommu: prevent suspend if we could not resume iommu/gart support misses suspend/resume code, which can do bad stuff, including memory corruption on resume. Prevent system suspend in case we would be unable to resume. Signed-off-by: Pavel Machek Tested-by: Patrick Signed-off-by: Andrew Morton Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-gart_64.c b/arch/x86/kernel/pci-gart_64.c index c07455d..aa8ec92 100644 --- a/arch/x86/kernel/pci-gart_64.c +++ b/arch/x86/kernel/pci-gart_64.c @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -548,6 +549,28 @@ static __init unsigned read_aperture(struct pci_dev *dev, u32 *size) return aper_base; } +static int gart_resume(struct sys_device *dev) +{ + return 0; +} + +static int gart_suspend(struct sys_device *dev, pm_message_t state) +{ + return -EINVAL; +} + +static struct sysdev_class gart_sysdev_class = { + .name = "gart", + .suspend = gart_suspend, + .resume = gart_resume, + +}; + +static struct sys_device device_gart = { + .id = 0, + .cls = &gart_sysdev_class, +}; + /* * Private Northbridge GATT initialization in case we cannot use the * AGP driver for some reason. @@ -558,7 +581,7 @@ static __init int init_k8_gatt(struct agp_kern_info *info) unsigned aper_base, new_aper_base; struct pci_dev *dev; void *gatt; - int i; + int i, error; printk(KERN_INFO "PCI-DMA: Disabling AGP.\n"); aper_size = aper_base = info->aper_size = 0; @@ -606,6 +629,12 @@ static __init int init_k8_gatt(struct agp_kern_info *info) pci_write_config_dword(dev, 0x90, ctl); } + + error = sysdev_class_register(&gart_sysdev_class); + if (!error) + error = sysdev_register(&device_gart); + if (error) + panic("Could not register gart_sysdev -- would corrupt data on next suspend"); flush_gart(); printk(KERN_INFO "PCI-DMA: aperture base @ %x size %u KB\n", -- cgit v0.10.2 From 870568b39064cab2dd971fe57969916036982862 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Mon, 2 Jun 2008 15:57:27 -0700 Subject: x86, fpu: fix CONFIG_PREEMPT=y corruption of application's FPU stack MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit JĂ¼rgen Mell reported an FPU state corruption bug under CONFIG_PREEMPT, and bisected it to commit v2.6.19-1363-gacc2076, "i386: add sleazy FPU optimization". Add tsk_used_math() checks to prevent calling math_state_restore() which can sleep in the case of !tsk_used_math(). This prevents making a blocking call in __switch_to(). Apparently "fpu_counter > 5" check is not enough, as in some signal handling and fork/exec scenarios, fpu_counter > 5 and !tsk_used_math() is possible. It's a side effect though. This is the failing scenario: process 'A' in save_i387_ia32() just after clear_used_math() Got an interrupt and pre-empted out. At the next context switch to process 'A' again, kernel tries to restore the math state proactively and sees a fpu_counter > 0 and !tsk_used_math() This results in init_fpu() during the __switch_to()'s math_state_restore() And resulting in fpu corruption which will be saved/restored (save_i387_fxsave and restore_i387_fxsave) during the remaining part of the signal handling after the context switch. Bisected-by: JĂ¼rgen Mell Signed-off-by: Suresh Siddha Tested-by: JĂ¼rgen Mell Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Cc: stable@kernel.org diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index f8476df..6d54833 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -649,8 +649,11 @@ struct task_struct * __switch_to(struct task_struct *prev_p, struct task_struct /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter > 5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); /* diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index e2319f3..ac54ff5 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -658,8 +658,11 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) /* If the task has used fpu the last 5 timeslices, just do a full * restore of the math state immediately to avoid the trap; the * chances of needing FPU soon are obviously high now + * + * tsk_used_math() checks prevent calling math_state_restore(), + * which can sleep in the case of !tsk_used_math() */ - if (next_p->fpu_counter>5) + if (tsk_used_math(next_p) && next_p->fpu_counter > 5) math_state_restore(); return prev_p; } -- cgit v0.10.2 From a064d5bdd0c9602e4cd930ad949392640b37dda7 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: ibmaem endianness annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index 5c006c9..c9416e6 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -189,8 +189,8 @@ static struct aem_iana_id system_x_id = { struct aem_find_firmware_req { struct aem_iana_id id; u8 rsvd; - u16 index; - u16 module_type_id; + __be16 index; + __be16 module_type_id; } __packed; struct aem_find_firmware_resp { @@ -202,7 +202,7 @@ struct aem_find_firmware_resp { struct aem_find_instance_req { struct aem_iana_id id; u8 instance_number; - u16 module_type_id; + __be16 module_type_id; } __packed; struct aem_find_instance_resp { @@ -444,17 +444,17 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, } case 2: { u16 *x = buf; - *x = be16_to_cpup((u16 *)rs_resp->bytes); + *x = be16_to_cpup((__be16 *)rs_resp->bytes); break; } case 4: { u32 *x = buf; - *x = be32_to_cpup((u32 *)rs_resp->bytes); + *x = be32_to_cpup((__be32 *)rs_resp->bytes); break; } case 8: { u64 *x = buf; - *x = be64_to_cpup((u64 *)rs_resp->bytes); + *x = be64_to_cpup((__be64 *)rs_resp->bytes); break; } } -- cgit v0.10.2 From 76e6f2526ff69eba466f583d94beb7cf6b0bddd6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: usb/c67x00 endianness annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/usb/c67x00/c67x00-ll-hpi.c b/drivers/usb/c67x00/c67x00-ll-hpi.c index 5100fbb..a9636f4 100644 --- a/drivers/usb/c67x00/c67x00-ll-hpi.c +++ b/drivers/usb/c67x00/c67x00-ll-hpi.c @@ -120,7 +120,7 @@ static void hpi_write_word(struct c67x00_device *dev, u16 reg, u16 value) * Only data is little endian, addr has cpu endianess */ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, - u16 *data, u16 count) + __le16 *data, u16 count) { unsigned long flags; int i; @@ -129,7 +129,7 @@ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, hpi_write_reg(dev, HPI_ADDR, addr); for (i = 0; i < count; i++) - hpi_write_reg(dev, HPI_DATA, cpu_to_le16(*data++)); + hpi_write_reg(dev, HPI_DATA, le16_to_cpu(*data++)); spin_unlock_irqrestore(&dev->hpi.lock, flags); } @@ -138,7 +138,7 @@ static void hpi_write_words_le16(struct c67x00_device *dev, u16 addr, * Only data is little endian, addr has cpu endianess */ static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr, - u16 *data, u16 count) + __le16 *data, u16 count) { unsigned long flags; int i; @@ -146,7 +146,7 @@ static void hpi_read_words_le16(struct c67x00_device *dev, u16 addr, spin_lock_irqsave(&dev->hpi.lock, flags); hpi_write_reg(dev, HPI_ADDR, addr); for (i = 0; i < count; i++) - *data++ = le16_to_cpu(hpi_read_reg(dev, HPI_DATA)); + *data++ = cpu_to_le16(hpi_read_reg(dev, HPI_DATA)); spin_unlock_irqrestore(&dev->hpi.lock, flags); } @@ -425,7 +425,7 @@ void c67x00_ll_write_mem_le16(struct c67x00_device *dev, u16 addr, len--; } - hpi_write_words_le16(dev, addr, (u16 *)buf, len / 2); + hpi_write_words_le16(dev, addr, (__le16 *)buf, len / 2); buf += len & ~0x01; addr += len & ~0x01; len &= 0x01; @@ -456,7 +456,7 @@ void c67x00_ll_read_mem_le16(struct c67x00_device *dev, u16 addr, len--; } - hpi_read_words_le16(dev, addr, (u16 *)buf, len / 2); + hpi_read_words_le16(dev, addr, (__le16 *)buf, len / 2); buf += len & ~0x01; addr += len & ~0x01; len &= 0x01; -- cgit v0.10.2 From fa4144b758d58341d4e082ac2af259e97fbcbeee Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: cdc-wdm endianness fixes * wMaxPacketSize is le16; copying it to a field of local structure and then using that field as host-endian (size of object to be allocated) is broken. * bMaxPacketSize0 is 8-bit; feeding it to le16_to_cpu() is bogus and since the result is used as host-endian, it's not even misspelled cpu_to_le16(). Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index 107666d..731db05 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -611,8 +611,8 @@ next_desc: goto err; } - desc->wMaxPacketSize = ep->wMaxPacketSize; - desc->bMaxPacketSize0 = cpu_to_le16(udev->descriptor.bMaxPacketSize0); + desc->wMaxPacketSize = le16_to_cpu(ep->wMaxPacketSize); + desc->bMaxPacketSize0 = udev->descriptor.bMaxPacketSize0; desc->orq = kmalloc(sizeof(struct usb_ctrlrequest), GFP_KERNEL); if (!desc->orq) -- cgit v0.10.2 From 6399e7acbf9193c7d48827329ca592a1c8dc9e69 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: isp1760-if iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 440bf94..c9db3fe 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -104,8 +104,8 @@ static u32 nxp_pci_io_base; static u32 iolength; static u32 pci_mem_phy0; static u32 length; -static u8 *chip_addr; -static u8 *iobase; +static u8 __iomem *chip_addr; +static u8 __iomem *iobase; static int __devinit isp1761_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) -- cgit v0.10.2 From 1d92cfd54a51ff1b9593019fdde56793b66ba6a9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: cifs endianness fixes __le16 fields used as host-endian. Signed-off-by: Al Viro Acked-by: Steve French Signed-off-by: Linus Torvalds diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index 9b8b4cf..fb655b4 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -3927,9 +3927,9 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, } ref = (struct dfs_referral_level_3 *) &(pSMBr->referrals); - if (ref->VersionNumber != 3) { + if (ref->VersionNumber != cpu_to_le16(3)) { cERROR(1, ("Referrals of V%d version are not supported," - "should be V3", ref->VersionNumber)); + "should be V3", le16_to_cpu(ref->VersionNumber))); rc = -EINVAL; goto parse_DFS_referrals_exit; } @@ -3977,7 +3977,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr, if (rc) goto parse_DFS_referrals_exit; - ref += ref->Size; + ref += le16_to_cpu(ref->Size); } parse_DFS_referrals_exit: -- cgit v0.10.2 From 1a79d1c37178935a3092f73c8832933e9fed1f66 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a20693e..b5c1e66 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2861,7 +2861,8 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) struct config_param *config; struct mac_info *mac_control; int pkts_processed = 0; - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; int budget_org = budget; @@ -2878,7 +2879,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) if (pkts_processed < budget_org) { netif_rx_complete(dev, napi); /*Re Enable MSI-Rx Vector*/ - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += 7 - ring->ring_no; val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; writeb(val8, addr); @@ -4364,9 +4365,10 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) return IRQ_HANDLED; if (sp->config.napi) { - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += (7 - ring->ring_no); val8 = (ring->ring_no == 0) ? 0x7f : 0xff; writeb(val8, addr); -- cgit v0.10.2 From 9307245765108a7ec827ef936560f333447c45ef Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: mpc52xx_gpio iomem annotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c index 48da5df..8a455eb 100644 --- a/arch/powerpc/platforms/52xx/mpc52xx_gpio.c +++ b/arch/powerpc/platforms/52xx/mpc52xx_gpio.c @@ -100,7 +100,7 @@ static int mpc52xx_wkup_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio_wkup *regs = mm_gc->regs; + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; unsigned long flags; spin_lock_irqsave(&gpio_lock, flags); @@ -122,7 +122,7 @@ static int mpc52xx_wkup_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpio_wkup *regs = mm_gc->regs; + struct mpc52xx_gpio_wkup __iomem *regs = mm_gc->regs; struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); unsigned long flags; @@ -150,7 +150,7 @@ static int __devinit mpc52xx_wkup_gpiochip_probe(struct of_device *ofdev, const struct of_device_id *match) { struct mpc52xx_gpiochip *chip; - struct mpc52xx_gpio_wkup *regs; + struct mpc52xx_gpio_wkup __iomem *regs; struct of_gpio_chip *ofchip; int ret; @@ -260,7 +260,7 @@ static int mpc52xx_simple_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio *regs = mm_gc->regs; + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; unsigned long flags; spin_lock_irqsave(&gpio_lock, flags); @@ -284,7 +284,7 @@ mpc52xx_simple_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val) struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); struct mpc52xx_gpiochip *chip = container_of(mm_gc, struct mpc52xx_gpiochip, mmchip); - struct mpc52xx_gpio *regs = mm_gc->regs; + struct mpc52xx_gpio __iomem *regs = mm_gc->regs; unsigned long flags; spin_lock_irqsave(&gpio_lock, flags); @@ -312,7 +312,7 @@ static int __devinit mpc52xx_simple_gpiochip_probe(struct of_device *ofdev, { struct mpc52xx_gpiochip *chip; struct of_gpio_chip *ofchip; - struct mpc52xx_gpio *regs; + struct mpc52xx_gpio __iomem *regs; int ret; chip = kzalloc(sizeof(*chip), GFP_KERNEL); @@ -387,7 +387,7 @@ mpc52xx_gpt_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val) static int mpc52xx_gpt_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio) { struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc); - struct mpc52xx_gpt *regs = mm_gc->regs; + struct mpc52xx_gpt __iomem *regs = mm_gc->regs; out_be32(®s->mode, 0x04); -- cgit v0.10.2 From c409d52bd1f16b37d35a50162cbf6401011f1135 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: celleb_scc_pciex endianness misannotations Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/platforms/cell/celleb_scc_pciex.c b/arch/powerpc/platforms/cell/celleb_scc_pciex.c index 31da84c..0e04f8f 100644 --- a/arch/powerpc/platforms/cell/celleb_scc_pciex.c +++ b/arch/powerpc/platforms/cell/celleb_scc_pciex.c @@ -217,7 +217,7 @@ static u##size scc_pciex_in##name(unsigned long port) \ static void scc_pciex_ins##name(unsigned long p, void *b, unsigned long c) \ { \ struct iowa_bus *bus = iowa_pio_find_bus(p); \ - u##size *dst = b; \ + __le##size *dst = b; \ for (; c != 0; c--, dst++) \ *dst = cpu_to_le##size(__scc_pciex_in##name(bus->phb, p)); \ scc_pciex_io_flush(bus); \ @@ -231,10 +231,11 @@ static void scc_pciex_outs##name(unsigned long p, const void *b, \ unsigned long c) \ { \ struct iowa_bus *bus = iowa_pio_find_bus(p); \ - const u##size *src = b; \ + const __le##size *src = b; \ for (; c != 0; c--, src++) \ __scc_pciex_out##name(bus->phb, le##size##_to_cpu(*src), p); \ } +#define __le8 u8 #define cpu_to_le8(x) (x) #define le8_to_cpu(x) (x) PCIEX_PIO_FUNC(8, b) -- cgit v0.10.2 From d430a227d272fa514bade388bf511dba4ec2962a Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: bogus format in ip6mr ptrdiff_t is %t..., not %Z... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/net/ipv6/ip6mr.c b/net/ipv6/ip6mr.c index 2de3c46..1479618 100644 --- a/net/ipv6/ip6mr.c +++ b/net/ipv6/ip6mr.c @@ -197,7 +197,7 @@ static int ip6mr_vif_seq_show(struct seq_file *seq, void *v) const char *name = vif->dev ? vif->dev->name : "none"; seq_printf(seq, - "%2Zd %-10s %8ld %7ld %8ld %7ld %05X\n", + "%2td %-10s %8ld %7ld %8ld %7ld %05X\n", vif - vif6_table, name, vif->bytes_in, vif->pkt_in, vif->bytes_out, vif->pkt_out, -- cgit v0.10.2 From e97dcb0eadbb821eccd549d4987b653cf61e2374 Mon Sep 17 00:00:00 2001 From: Casey Schaufler Date: Mon, 2 Jun 2008 10:04:32 -0700 Subject: Smack: fuse mount hang fix The d_instantiate hook for Smack can hang on the root inode of a filesystem if the file system code has not really done all the set-up. Fuse is known to encounter this problem. This change detects an attempt to instantiate a root inode and addresses it early in the processing, before any attempt is made to do something that might hang. Signed-off-by: Casey Schaufler Tested-by: Luiz Fernando N. Capitulino Signed-off-by: Linus Torvalds diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index b5c8f92..4a09293 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -1881,6 +1881,18 @@ static void smack_d_instantiate(struct dentry *opt_dentry, struct inode *inode) final = sbsp->smk_default; /* + * If this is the root inode the superblock + * may be in the process of initialization. + * If that is the case use the root value out + * of the superblock. + */ + if (opt_dentry->d_parent == opt_dentry) { + isp->smk_inode = sbsp->smk_root; + isp->smk_flags |= SMK_INODE_INSTANT; + goto unlockandout; + } + + /* * This is pretty hackish. * Casey says that we shouldn't have to do * file system specific code, but it does help -- cgit v0.10.2 From 9b62d864314736fb6cc5c5db5b964d4a3c093424 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Wed, 21 May 2008 17:26:15 +0800 Subject: [MTD] [NAND] pxa: fix incorrect calling of pxa3xx_nand_config() on resume path Signed-off-by: Eric Miao Signed-off-by: David Woodhouse diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index fceb468..fe2bc7e 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -1216,7 +1216,7 @@ static int pxa3xx_nand_resume(struct platform_device *pdev) clk_enable(info->clk); - return pxa3xx_nand_config_flash(info); + return pxa3xx_nand_config_flash(info, info->flash_info); } #else #define pxa3xx_nand_suspend NULL -- cgit v0.10.2 From d2ee3f2c4b1db1320c1efb4dcaceeaf6c7e6c2d3 Mon Sep 17 00:00:00 2001 From: Dong Wei Date: Wed, 4 Jun 2008 09:57:51 -0700 Subject: netfilter: xt_connlimit: fix accouning when receive RST packet in ESTABLISHED state In xt_connlimit match module, the counter of an IP is decreased when the TCP packet is go through the chain with ip_conntrack state TW. Well, it's very natural that the server and client close the socket with FIN packet. But when the client/server close the socket with RST packet(using so_linger), the counter for this connection still exsit. The following patch can fix it which is based on linux-2.6.25.4 Signed-off-by: Dong Wei Acked-by: Jan Engelhardt Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/xt_connlimit.c b/net/netfilter/xt_connlimit.c index 2e89a00..70907f6 100644 --- a/net/netfilter/xt_connlimit.c +++ b/net/netfilter/xt_connlimit.c @@ -73,7 +73,8 @@ connlimit_iphash6(const union nf_inet_addr *addr, static inline bool already_closed(const struct nf_conn *conn) { if (nf_ct_protonum(conn) == IPPROTO_TCP) - return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT; + return conn->proto.tcp.state == TCP_CONNTRACK_TIME_WAIT || + conn->proto.tcp.state == TCP_CONNTRACK_CLOSE; else return 0; } -- cgit v0.10.2 From b9c698964614f71b9c8afeca163a945b4c2e2d20 Mon Sep 17 00:00:00 2001 From: Jarek Poplawski Date: Wed, 4 Jun 2008 09:58:27 -0700 Subject: netfilter: nf_conntrack_ipv6: fix inconsistent lock state in nf_ct_frag6_gather() [ 63.531438] ================================= [ 63.531520] [ INFO: inconsistent lock state ] [ 63.531520] 2.6.26-rc4 #7 [ 63.531520] --------------------------------- [ 63.531520] inconsistent {softirq-on-W} -> {in-softirq-W} usage. [ 63.531520] tcpsic6/3864 [HC0[0]:SC1[1]:HE1:SE0] takes: [ 63.531520] (&q->lock#2){-+..}, at: [] ipv6_frag_rcv+0xd0/0xbd0 [ 63.531520] {softirq-on-W} state was registered at: [ 63.531520] [] __lock_acquire+0x3aa/0x1080 [ 63.531520] [] lock_acquire+0x76/0xa0 [ 63.531520] [] _spin_lock+0x2b/0x40 [ 63.531520] [] nf_ct_frag6_gather+0x3f6/0x910 ... According to this and another similar lockdep report inet_fragment locks are taken from nf_ct_frag6_gather() with softirqs enabled, but these locks are mainly used in softirq context, so disabling BHs is necessary. Reported-and-tested-by: Eric Sesterhenn Signed-off-by: Jarek Poplawski Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index 2dccad4..e65e26e 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -209,7 +209,9 @@ fq_find(__be32 id, struct in6_addr *src, struct in6_addr *dst) arg.dst = dst; hash = ip6qhashfn(id, src, dst); + local_bh_disable(); q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash); + local_bh_enable(); if (q == NULL) goto oom; @@ -638,10 +640,10 @@ struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb) goto ret_orig; } - spin_lock(&fq->q.lock); + spin_lock_bh(&fq->q.lock); if (nf_ct_frag6_queue(fq, clone, fhdr, nhoff) < 0) { - spin_unlock(&fq->q.lock); + spin_unlock_bh(&fq->q.lock); pr_debug("Can't insert skb to queue\n"); fq_put(fq); goto ret_orig; @@ -653,7 +655,7 @@ struct sk_buff *nf_ct_frag6_gather(struct sk_buff *skb) if (ret_skb == NULL) pr_debug("Can't reassemble fragmented packets\n"); } - spin_unlock(&fq->q.lock); + spin_unlock_bh(&fq->q.lock); fq_put(fq); return ret_skb; -- cgit v0.10.2 From edeb280e49d38a5330db25463ef45f5466b0058a Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 4 Jun 2008 10:35:03 -0700 Subject: Fix uart_set_ldisc() function type Commit 64e9159f5d2c4edf5fa6425031e556f8fddaf7e6 ("serial_core: uart_set_ldisc infrastructure") introduced the ability for low-level serial drivers to be informed when the tty ldisc changes. However, the actual tty-layer function that does this callback for serial devices was declared with the wrong type, having a spurious and unused 'ldisc' argument. This fixed the resulting compiler warning by just removing it. Acked-by: Blithering Idiot Signed-off-by: Linus Torvalds diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index 951a75e..c9b64e7 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1165,7 +1165,7 @@ out: return ret; } -static void uart_set_ldisc(struct tty_struct *tty, int ldisc) +static void uart_set_ldisc(struct tty_struct *tty) { struct uart_state *state = tty->driver_data; struct uart_port *port = state->port; -- cgit v0.10.2 From 8aca6cb1179ed9bef9351028c8d8af852903eae2 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Wed, 4 Jun 2008 11:34:22 -0700 Subject: tcp: Fix inconsistency source (CA_Open only when !tcp_left_out(tp)) MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It is possible that this skip path causes TCP to end up into an invalid state where ca_state was left to CA_Open while some segments already came into sacked_out. If next valid ACK doesn't contain new SACK information TCP fails to enter into tcp_fastretrans_alert(). Thus at least high_seq is set incorrectly to a too high seqno because some new data segments could be sent in between (and also, limited transmit is not being correctly invoked there). Reordering in both directions can easily cause this situation to occur. I guess we would want to use tcp_moderate_cwnd(tp) there as well as it may be possible to use this to trigger oversized burst to network by sending an old ACK with huge amount of SACK info, but I'm a bit unsure about its effects (mainly to FlightSize), so to be on the safe side I just currently fixed it minimally to keep TCP's state consistent (obviously, such nasty ACKs have been possible this far). Though it seems that FlightSize is already underestimated by some amount, so probably on the long term we might want to trigger recovery there too, if appropriate, to make FlightSize calculation to resemble reality at the time when the losses where discovered (but such change scares me too much now and requires some more thinking anyway how to do that as it likely involves some code shuffling). This bug was found by Brian Vowell while running my TCP debug patch to find cause of another TCP issue (fackets_out miscount). Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index b54d9d3..54a0b74 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -2483,6 +2483,20 @@ static inline void tcp_complete_cwr(struct sock *sk) tcp_ca_event(sk, CA_EVENT_COMPLETE_CWR); } +static void tcp_try_keep_open(struct sock *sk) +{ + struct tcp_sock *tp = tcp_sk(sk); + int state = TCP_CA_Open; + + if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker) + state = TCP_CA_Disorder; + + if (inet_csk(sk)->icsk_ca_state != state) { + tcp_set_ca_state(sk, state); + tp->high_seq = tp->snd_nxt; + } +} + static void tcp_try_to_open(struct sock *sk, int flag) { struct tcp_sock *tp = tcp_sk(sk); @@ -2496,15 +2510,7 @@ static void tcp_try_to_open(struct sock *sk, int flag) tcp_enter_cwr(sk, 1); if (inet_csk(sk)->icsk_ca_state != TCP_CA_CWR) { - int state = TCP_CA_Open; - - if (tcp_left_out(tp) || tp->retrans_out || tp->undo_marker) - state = TCP_CA_Disorder; - - if (inet_csk(sk)->icsk_ca_state != state) { - tcp_set_ca_state(sk, state); - tp->high_seq = tp->snd_nxt; - } + tcp_try_keep_open(sk); tcp_moderate_cwnd(tp); } else { tcp_cwnd_down(sk, flag); @@ -3310,8 +3316,11 @@ no_queue: return 1; old_ack: - if (TCP_SKB_CB(skb)->sacked) + if (TCP_SKB_CB(skb)->sacked) { tcp_sacktag_write_queue(sk, skb, prior_snd_una); + if (icsk->icsk_ca_state == TCP_CA_Open) + tcp_try_keep_open(sk); + } uninteresting_ack: SOCK_DEBUG(sk, "Ack %u out of %u:%u\n", ack, tp->snd_una, tp->snd_nxt); -- cgit v0.10.2 From e51171019bb0e1f9fb57c25bd2e38ce652eaea27 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 29 May 2008 19:55:05 +0900 Subject: [SCTP]: Fix NULL dereference of asoc. Commit 7cbca67c073263c179f605bdbbdc565ab29d801d ("[IPV6]: Support Source Address Selection API (RFC5014)") introduced NULL dereference of asoc to sctp_v6_get_saddr in net/sctp/ipv6.c. Pointed out by Johann Felix Soden . Signed-off-by: YOSHIFUJI Hideaki diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 0ce0443..917d425 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -548,7 +548,8 @@ struct sctp_af { struct dst_entry *(*get_dst) (struct sctp_association *asoc, union sctp_addr *daddr, union sctp_addr *saddr); - void (*get_saddr) (struct sctp_association *asoc, + void (*get_saddr) (struct sctp_sock *sk, + struct sctp_association *asoc, struct dst_entry *dst, union sctp_addr *daddr, union sctp_addr *saddr); diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index e45e44c..e4aac32 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -299,7 +299,8 @@ static inline int sctp_v6_addr_match_len(union sctp_addr *s1, /* Fills in the source address(saddr) based on the destination address(daddr) * and asoc's bind address list. */ -static void sctp_v6_get_saddr(struct sctp_association *asoc, +static void sctp_v6_get_saddr(struct sctp_sock *sk, + struct sctp_association *asoc, struct dst_entry *dst, union sctp_addr *daddr, union sctp_addr *saddr) @@ -318,7 +319,7 @@ static void sctp_v6_get_saddr(struct sctp_association *asoc, if (!asoc) { ipv6_dev_get_saddr(dst ? ip6_dst_idev(dst)->dev : NULL, &daddr->v6.sin6_addr, - inet6_sk(asoc->base.sk)->srcprefs, + inet6_sk(&sk->inet.sk)->srcprefs, &saddr->v6.sin6_addr); SCTP_DEBUG_PRINTK("saddr from ipv6_get_saddr: " NIP6_FMT "\n", NIP6(saddr->v6.sin6_addr)); diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 0ec234b..13ee7fa 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -519,7 +519,8 @@ out: /* For v4, the source address is cached in the route entry(dst). So no need * to cache it separately and hence this is an empty routine. */ -static void sctp_v4_get_saddr(struct sctp_association *asoc, +static void sctp_v4_get_saddr(struct sctp_sock *sk, + struct sctp_association *asoc, struct dst_entry *dst, union sctp_addr *daddr, union sctp_addr *saddr) diff --git a/net/sctp/transport.c b/net/sctp/transport.c index f4938f6..62082e7 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -291,7 +291,7 @@ void sctp_transport_route(struct sctp_transport *transport, if (saddr) memcpy(&transport->saddr, saddr, sizeof(union sctp_addr)); else - af->get_saddr(asoc, dst, daddr, &transport->saddr); + af->get_saddr(opt, asoc, dst, daddr, &transport->saddr); transport->dst = dst; if ((transport->param_flags & SPP_PMTUD_DISABLE) && transport->pathmtu) { -- cgit v0.10.2 From a3c960899e042bc1c2b730a2115fa32da7802039 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Wed, 4 Jun 2008 01:30:25 +0900 Subject: [IPV6] UDP: Possible dst leak in udpv6_sendmsg. ip6_sk_dst_lookup returns held dst entry. It should be released on all paths beyond this point. Add missed release when up->pending is set. Bug report and initial patch by Denis V. Lunev . Signed-off-by: YOSHIFUJI Hideaki Acked-by: Denis V. Lunev diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 1fd784f..47123bf 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -848,12 +848,14 @@ do_append_data: } else { dst_release(dst); } + dst = NULL; } if (err > 0) err = np->recverr ? net_xmit_errno(err) : 0; release_sock(sk); out: + dst_release(dst); fl6_sock_release(flowlabel); if (!err) return len; -- cgit v0.10.2 From 24ef0da7b864435f221f668bc8a324160d063e78 Mon Sep 17 00:00:00 2001 From: Thomas Graf Date: Wed, 28 May 2008 16:54:22 +0200 Subject: [IPV6] ADDRCONF: Check range of prefix length As of now, the prefix length is not vaildated when adding or deleting addresses. The value is passed directly into the inet6_ifaddr structure and later passed on to memcmp() as length indicator which relies on the value never to exceed 128 (bits). Due to the missing check, the currently code allows for any 8 bit value to be passed on as prefix length while using the netlink interface, and any 32 bit value while using the ioctl interface. [Use unsigned int instead to generate better code - yoshfuji] Signed-off-by: Thomas Graf Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index 3a83557..c3b20c5 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -2027,7 +2027,7 @@ err_exit: * Manual configuration of address on an interface */ static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx, - int plen, __u8 ifa_flags, __u32 prefered_lft, + unsigned int plen, __u8 ifa_flags, __u32 prefered_lft, __u32 valid_lft) { struct inet6_ifaddr *ifp; @@ -2039,6 +2039,9 @@ static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx, ASSERT_RTNL(); + if (plen > 128) + return -EINVAL; + /* check the lifetime */ if (!valid_lft || prefered_lft > valid_lft) return -EINVAL; @@ -2095,12 +2098,15 @@ static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx, } static int inet6_addr_del(struct net *net, int ifindex, struct in6_addr *pfx, - int plen) + unsigned int plen) { struct inet6_ifaddr *ifp; struct inet6_dev *idev; struct net_device *dev; + if (plen > 128) + return -EINVAL; + dev = __dev_get_by_index(net, ifindex); if (!dev) return -ENODEV; -- cgit v0.10.2 From 82836372311a5cbf9cc5f4f47f9b56cb9edfe90d Mon Sep 17 00:00:00 2001 From: Colin Date: Tue, 27 May 2008 00:04:43 +0800 Subject: [IPV6] TUNNEL6: Fix incoming packet length check for inter-protocol tunnel. I discover a strange behavior in [ipv4 in ipv6] tunnel. When IPv6 tunnel payload is less than 40(0x28), packet can be sent to network, received in physical interface, but not seen in IP tunnel interface. No counter increase in tunnel interface. Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/tunnel6.c b/net/ipv6/tunnel6.c index 6323921..669f280 100644 --- a/net/ipv6/tunnel6.c +++ b/net/ipv6/tunnel6.c @@ -109,7 +109,7 @@ static int tunnel46_rcv(struct sk_buff *skb) { struct xfrm6_tunnel *handler; - if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) + if (!pskb_may_pull(skb, sizeof(struct iphdr))) goto drop; for (handler = tunnel46_handlers; handler; handler = handler->next) -- cgit v0.10.2 From baa2bfb8aef24bb7fe1875b256918724b3884662 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Fri, 30 May 2008 11:35:03 +0900 Subject: [IPV4] TUNNEL4: Fix incoming packet length check for inter-protocol tunnel. Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv4/tunnel4.c b/net/ipv4/tunnel4.c index d3b709a..cb1f0e8 100644 --- a/net/ipv4/tunnel4.c +++ b/net/ipv4/tunnel4.c @@ -97,7 +97,7 @@ static int tunnel64_rcv(struct sk_buff *skb) { struct xfrm_tunnel *handler; - if (!pskb_may_pull(skb, sizeof(struct iphdr))) + if (!pskb_may_pull(skb, sizeof(struct ipv6hdr))) goto drop; for (handler = tunnel64_handlers; handler; handler = handler->next) -- cgit v0.10.2 From 4bed72e4f5502ea3322f0a00794815fa58951abe Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Tue, 27 May 2008 17:37:49 +0900 Subject: [IPV6] ADDRCONF: Allow longer lifetime on 64bit archs. - Allow longer lifetimes (>= 0x7fffffff/HZ) on 64bit archs by using unsigned long. - Shadow this arithmetic overflow workaround by introducing helper functions: addrconf_timeout_fixup() and addrconf_finite_timeout(). Signed-off-by: YOSHIFUJI Hideaki diff --git a/include/net/addrconf.h b/include/net/addrconf.h index 0a2f037..bbd3d58 100644 --- a/include/net/addrconf.h +++ b/include/net/addrconf.h @@ -94,6 +94,28 @@ extern void addrconf_join_solict(struct net_device *dev, extern void addrconf_leave_solict(struct inet6_dev *idev, struct in6_addr *addr); +static inline unsigned long addrconf_timeout_fixup(u32 timeout, + unsigned unit) +{ + if (timeout == 0xffffffff) + return ~0UL; + + /* + * Avoid arithmetic overflow. + * Assuming unit is constant and non-zero, this "if" statement + * will go away on 64bit archs. + */ + if (0xfffffffe > LONG_MAX / unit && timeout > LONG_MAX / unit) + return LONG_MAX / unit; + + return timeout; +} + +static inline int addrconf_finite_timeout(unsigned long timeout) +{ + return ~timeout; +} + /* * IPv6 Address Label subsystem (addrlabel.c) */ diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index c3b20c5..147588f 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -731,8 +731,13 @@ static void ipv6_del_addr(struct inet6_ifaddr *ifp) onlink = -1; spin_lock(&ifa->lock); - lifetime = min_t(unsigned long, - ifa->valid_lft, 0x7fffffffUL/HZ); + + lifetime = addrconf_timeout_fixup(ifa->valid_lft, HZ); + /* + * Note: Because this address is + * not permanent, lifetime < + * LONG_MAX / HZ here. + */ if (time_before(expires, ifa->tstamp + lifetime * HZ)) expires = ifa->tstamp + lifetime * HZ; @@ -1722,7 +1727,6 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len) __u32 valid_lft; __u32 prefered_lft; int addr_type; - unsigned long rt_expires; struct inet6_dev *in6_dev; pinfo = (struct prefix_info *) opt; @@ -1764,28 +1768,23 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len) * 2) Configure prefixes with the auto flag set */ - if (valid_lft == INFINITY_LIFE_TIME) - rt_expires = ~0UL; - else if (valid_lft >= 0x7FFFFFFF/HZ) { + if (pinfo->onlink) { + struct rt6_info *rt; + unsigned long rt_expires; + /* Avoid arithmetic overflow. Really, we could * save rt_expires in seconds, likely valid_lft, * but it would require division in fib gc, that it * not good. */ - rt_expires = 0x7FFFFFFF - (0x7FFFFFFF % HZ); - } else - rt_expires = valid_lft * HZ; + if (HZ > USER_HZ) + rt_expires = addrconf_timeout_fixup(valid_lft, HZ); + else + rt_expires = addrconf_timeout_fixup(valid_lft, USER_HZ); - /* - * We convert this (in jiffies) to clock_t later. - * Avoid arithmetic overflow there as well. - * Overflow can happen only if HZ < USER_HZ. - */ - if (HZ < USER_HZ && ~rt_expires && rt_expires > 0x7FFFFFFF / USER_HZ) - rt_expires = 0x7FFFFFFF / USER_HZ; + if (addrconf_finite_timeout(rt_expires)) + rt_expires *= HZ; - if (pinfo->onlink) { - struct rt6_info *rt; rt = rt6_lookup(dev_net(dev), &pinfo->prefix, NULL, dev->ifindex, 1); @@ -1794,7 +1793,7 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len) if (valid_lft == 0) { ip6_del_rt(rt); rt = NULL; - } else if (~rt_expires) { + } else if (addrconf_finite_timeout(rt_expires)) { /* not infinity */ rt->rt6i_expires = jiffies + rt_expires; rt->rt6i_flags |= RTF_EXPIRES; @@ -1803,9 +1802,9 @@ void addrconf_prefix_rcv(struct net_device *dev, u8 *opt, int len) rt->rt6i_expires = 0; } } else if (valid_lft) { - int flags = RTF_ADDRCONF | RTF_PREFIX_RT; clock_t expires = 0; - if (~rt_expires) { + int flags = RTF_ADDRCONF | RTF_PREFIX_RT; + if (addrconf_finite_timeout(rt_expires)) { /* not infinity */ flags |= RTF_EXPIRES; expires = jiffies_to_clock_t(rt_expires); @@ -2036,6 +2035,7 @@ static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx, int scope; u32 flags; clock_t expires; + unsigned long timeout; ASSERT_RTNL(); @@ -2055,22 +2055,23 @@ static int inet6_addr_add(struct net *net, int ifindex, struct in6_addr *pfx, scope = ipv6_addr_scope(pfx); - if (valid_lft == INFINITY_LIFE_TIME) { - ifa_flags |= IFA_F_PERMANENT; - flags = 0; - expires = 0; - } else { - if (valid_lft >= 0x7FFFFFFF/HZ) - valid_lft = 0x7FFFFFFF/HZ; + timeout = addrconf_timeout_fixup(valid_lft, HZ); + if (addrconf_finite_timeout(timeout)) { + expires = jiffies_to_clock_t(timeout * HZ); + valid_lft = timeout; flags = RTF_EXPIRES; - expires = jiffies_to_clock_t(valid_lft * HZ); + } else { + expires = 0; + flags = 0; + ifa_flags |= IFA_F_PERMANENT; } - if (prefered_lft == 0) - ifa_flags |= IFA_F_DEPRECATED; - else if ((prefered_lft >= 0x7FFFFFFF/HZ) && - (prefered_lft != INFINITY_LIFE_TIME)) - prefered_lft = 0x7FFFFFFF/HZ; + timeout = addrconf_timeout_fixup(prefered_lft, HZ); + if (addrconf_finite_timeout(timeout)) { + if (timeout == 0) + ifa_flags |= IFA_F_DEPRECATED; + prefered_lft = timeout; + } ifp = ipv6_add_addr(idev, pfx, plen, scope, ifa_flags); @@ -3175,26 +3176,28 @@ static int inet6_addr_modify(struct inet6_ifaddr *ifp, u8 ifa_flags, { u32 flags; clock_t expires; + unsigned long timeout; if (!valid_lft || (prefered_lft > valid_lft)) return -EINVAL; - if (valid_lft == INFINITY_LIFE_TIME) { - ifa_flags |= IFA_F_PERMANENT; - flags = 0; - expires = 0; - } else { - if (valid_lft >= 0x7FFFFFFF/HZ) - valid_lft = 0x7FFFFFFF/HZ; + timeout = addrconf_timeout_fixup(valid_lft, HZ); + if (addrconf_finite_timeout(timeout)) { + expires = jiffies_to_clock_t(timeout * HZ); + valid_lft = timeout; flags = RTF_EXPIRES; - expires = jiffies_to_clock_t(valid_lft * HZ); + } else { + expires = 0; + flags = 0; + ifa_flags |= IFA_F_PERMANENT; } - if (prefered_lft == 0) - ifa_flags |= IFA_F_DEPRECATED; - else if ((prefered_lft >= 0x7FFFFFFF/HZ) && - (prefered_lft != INFINITY_LIFE_TIME)) - prefered_lft = 0x7FFFFFFF/HZ; + timeout = addrconf_timeout_fixup(prefered_lft, HZ); + if (addrconf_finite_timeout(timeout)) { + if (timeout == 0) + ifa_flags |= IFA_F_DEPRECATED; + prefered_lft = timeout; + } spin_lock_bh(&ifp->lock); ifp->flags = (ifp->flags & ~(IFA_F_DEPRECATED | IFA_F_PERMANENT | IFA_F_NODAD | IFA_F_HOMEADDRESS)) | ifa_flags; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 48534c6..220cffe 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -446,7 +446,7 @@ int rt6_route_rcv(struct net_device *dev, u8 *opt, int len, struct route_info *rinfo = (struct route_info *) opt; struct in6_addr prefix_buf, *prefix; unsigned int pref; - u32 lifetime; + unsigned long lifetime; struct rt6_info *rt; if (len < sizeof(struct route_info)) { @@ -472,13 +472,7 @@ int rt6_route_rcv(struct net_device *dev, u8 *opt, int len, if (pref == ICMPV6_ROUTER_PREF_INVALID) pref = ICMPV6_ROUTER_PREF_MEDIUM; - lifetime = ntohl(rinfo->lifetime); - if (lifetime == 0xffffffff) { - /* infinity */ - } else if (lifetime > 0x7fffffff/HZ - 1) { - /* Avoid arithmetic overflow */ - lifetime = 0x7fffffff/HZ - 1; - } + lifetime = addrconf_timeout_fixup(ntohl(rinfo->lifetime), HZ); if (rinfo->length == 3) prefix = (struct in6_addr *)rinfo->prefix; @@ -506,7 +500,7 @@ int rt6_route_rcv(struct net_device *dev, u8 *opt, int len, (rt->rt6i_flags & ~RTF_PREF_MASK) | RTF_PREF(pref); if (rt) { - if (lifetime == 0xffffffff) { + if (!addrconf_finite_timeout(lifetime)) { rt->rt6i_flags &= ~RTF_EXPIRES; } else { rt->rt6i_expires = jiffies + HZ * lifetime; -- cgit v0.10.2 From 05335c2220c4911b69cb1bdd79e603ab08088372 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Wed, 28 May 2008 16:23:47 +0800 Subject: [IPV6]: Fix the return value of get destination options with NULL data pointer If we pass NULL data buffer to getsockopt(), it will return 0, and the option length is set to -EFAULT: getsockopt(sk, IPPROTO_IPV6, IPV6_DSTOPTS, NULL, &len); This is because ipv6_getsockopt_sticky() will return -EFAULT or -EINVAL if some error occur. This patch fix this problem. Signed-off-by: Yang Hongyang Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 56d55fe..aa7bedf 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -975,6 +975,9 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, len = ipv6_getsockopt_sticky(sk, np->opt, optname, optval, len); release_sock(sk); + /* check if ipv6_getsockopt_sticky() returns err code */ + if (len < 0) + return len; return put_user(len, optlen); } -- cgit v0.10.2 From 95b496b66615d8c43f77702049b1bd01e2f06595 Mon Sep 17 00:00:00 2001 From: Yang Hongyang Date: Wed, 28 May 2008 16:27:28 +0800 Subject: [IPV6]: Fix the data length of get destination options with short length If get destination options with length which is not enough for that option,getsockopt() will still return the real length of the option, which is larger then the buffer space. This is because ipv6_getsockopt_sticky() returns the real length of the option. This patch fix this problem. Signed-off-by: Yang Hongyang Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index aa7bedf..9293b9f 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -832,7 +832,7 @@ static int ipv6_getsockopt_sticky(struct sock *sk, struct ipv6_txoptions *opt, len = min_t(unsigned int, len, ipv6_optlen(hdr)); if (copy_to_user(optval, hdr, len)) return -EFAULT; - return ipv6_optlen(hdr); + return len; } static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, -- cgit v0.10.2 From 187e38384c4abfbbb1b880fab234d16c2df23a25 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Wed, 4 Jun 2008 13:01:37 +0900 Subject: [IPV6]: Check outgoing interface even if source address is unspecified. The outgoing interface index (ipi6_ifindex) in IPV6_PKTINFO ancillary data, is not checked if the source address (ipi6_addr) is unspecified. If the ipi6_ifindex is the not-exist interface, it should be fail. Based on patch from Shan Wei and Brian Haley . Signed-off-by: Shan Wei Signed-off-by: Brian Haley Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 94fa6ae..53e3883 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -509,7 +509,6 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl, for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) { int addr_type; - struct net_device *dev = NULL; if (!CMSG_OK(msg, cmsg)) { err = -EINVAL; @@ -522,6 +521,9 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl, switch (cmsg->cmsg_type) { case IPV6_PKTINFO: case IPV6_2292PKTINFO: + { + struct net_device *dev = NULL; + if (cmsg->cmsg_len < CMSG_LEN(sizeof(struct in6_pktinfo))) { err = -EINVAL; goto exit_f; @@ -535,32 +537,32 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl, fl->oif = src_info->ipi6_ifindex; } - addr_type = ipv6_addr_type(&src_info->ipi6_addr); + addr_type = __ipv6_addr_type(&src_info->ipi6_addr); - if (addr_type == IPV6_ADDR_ANY) - break; + if (fl->oif) { + dev = dev_get_by_index(&init_net, fl->oif); + if (!dev) + return -ENODEV; + } else if (addr_type & IPV6_ADDR_LINKLOCAL) + return -EINVAL; - if (addr_type & IPV6_ADDR_LINKLOCAL) { - if (!src_info->ipi6_ifindex) - return -EINVAL; - else { - dev = dev_get_by_index(&init_net, src_info->ipi6_ifindex); - if (!dev) - return -ENODEV; - } - } - if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr, - dev, 0)) { - if (dev) - dev_put(dev); - err = -EINVAL; - goto exit_f; + if (addr_type != IPV6_ADDR_ANY) { + int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL; + if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr, + strict ? dev : NULL, 0)) + err = -EINVAL; + else + ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr); } + if (dev) dev_put(dev); - ipv6_addr_copy(&fl->fl6_src, &src_info->ipi6_addr); + if (err) + goto exit_f; + break; + } case IPV6_FLOWINFO: if (cmsg->cmsg_len < CMSG_LEN(4)) { -- cgit v0.10.2 From 91e1908f569dd96a25a3947de8771e6cc93999dd Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Wed, 4 Jun 2008 13:02:49 +0900 Subject: [IPV6] NETNS: Handle ancillary data in appropriate namespace. Signed-off-by: YOSHIFUJI Hideaki diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h index 27394e0..112934a 100644 --- a/include/net/transp_v6.h +++ b/include/net/transp_v6.h @@ -40,7 +40,8 @@ extern int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb); -extern int datagram_send_ctl(struct msghdr *msg, +extern int datagram_send_ctl(struct net *net, + struct msghdr *msg, struct flowi *fl, struct ipv6_txoptions *opt, int *hlimit, int *tclass); diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 53e3883..b9c2de8 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -496,7 +496,8 @@ int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb) return 0; } -int datagram_send_ctl(struct msghdr *msg, struct flowi *fl, +int datagram_send_ctl(struct net *net, + struct msghdr *msg, struct flowi *fl, struct ipv6_txoptions *opt, int *hlimit, int *tclass) { @@ -540,7 +541,7 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl, addr_type = __ipv6_addr_type(&src_info->ipi6_addr); if (fl->oif) { - dev = dev_get_by_index(&init_net, fl->oif); + dev = dev_get_by_index(net, fl->oif); if (!dev) return -ENODEV; } else if (addr_type & IPV6_ADDR_LINKLOCAL) @@ -548,7 +549,7 @@ int datagram_send_ctl(struct msghdr *msg, struct flowi *fl, if (addr_type != IPV6_ADDR_ANY) { int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL; - if (!ipv6_chk_addr(&init_net, &src_info->ipi6_addr, + if (!ipv6_chk_addr(net, &src_info->ipi6_addr, strict ? dev : NULL, 0)) err = -EINVAL; else diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index eb7a9403..37a4e77 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -354,7 +354,7 @@ fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval, msg.msg_control = (void*)(fl->opt+1); flowi.oif = 0; - err = datagram_send_ctl(&msg, &flowi, fl->opt, &junk, &junk); + err = datagram_send_ctl(net, &msg, &flowi, fl->opt, &junk, &junk); if (err) goto done; err = -EINVAL; diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 9293b9f..3eef8e5 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -416,7 +416,7 @@ sticky_done: msg.msg_controllen = optlen; msg.msg_control = (void*)(opt+1); - retv = datagram_send_ctl(&msg, &fl, opt, &junk, &junk); + retv = datagram_send_ctl(net, &msg, &fl, opt, &junk, &junk); if (retv) goto done; update: diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 232e0dc..603df76 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -813,7 +813,7 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk, memset(opt, 0, sizeof(struct ipv6_txoptions)); opt->tot_len = sizeof(struct ipv6_txoptions); - err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass); + err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass); if (err < 0) { fl6_sock_release(flowlabel); return err; diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 47123bf..1b35c47 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -731,7 +731,7 @@ do_udp_sendmsg: memset(opt, 0, sizeof(struct ipv6_txoptions)); opt->tot_len = sizeof(*opt); - err = datagram_send_ctl(msg, &fl, opt, &hlimit, &tclass); + err = datagram_send_ctl(sock_net(sk), msg, &fl, opt, &hlimit, &tclass); if (err < 0) { fl6_sock_release(flowlabel); return err; -- cgit v0.10.2 From 49d074f4009a7b5ce9c17b040f978abcb4d7f6f6 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Wed, 4 Jun 2008 15:49:06 +0400 Subject: [IPV6]: Do not change protocol for raw IPv6 sockets. It is not allowed to change underlying protocol for int fd = socket(PF_INET6, SOCK_RAW, IPPROTO_UDP); Signed-off-by: Denis V. Lunev Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 3eef8e5..1afe210 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -161,6 +161,9 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, struct ipv6_txoptions *opt; struct sk_buff *pktopt; + if (sk->sk_type == SOCK_RAW) + break; + if (sk->sk_protocol != IPPROTO_UDP && sk->sk_protocol != IPPROTO_UDPLITE && sk->sk_protocol != IPPROTO_TCP) -- cgit v0.10.2 From 36d926b94a9908937593e5669162305a071b9cc3 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Wed, 4 Jun 2008 15:49:07 +0400 Subject: [IPV6]: inet_sk(sk)->cork.opt leak IPv6 UDP sockets wth IPv4 mapped address use udp_sendmsg to send the data actually. In this case ip_flush_pending_frames should be called instead of ip6_flush_pending_frames. Signed-off-by: Denis V. Lunev Signed-off-by: YOSHIFUJI Hideaki diff --git a/include/net/udp.h b/include/net/udp.h index 3e55a99..ccce837 100644 --- a/include/net/udp.h +++ b/include/net/udp.h @@ -135,6 +135,7 @@ extern void udp_err(struct sk_buff *, u32); extern int udp_sendmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg, size_t len); +extern void udp_flush_pending_frames(struct sock *sk); extern int udp_rcv(struct sk_buff *skb); extern int udp_ioctl(struct sock *sk, int cmd, unsigned long arg); diff --git a/net/ipv4/udp.c b/net/ipv4/udp.c index db1cb7c..56fcda3 100644 --- a/net/ipv4/udp.c +++ b/net/ipv4/udp.c @@ -420,7 +420,7 @@ void udp_err(struct sk_buff *skb, u32 info) /* * Throw away all pending data and cancel the corking. Socket is locked. */ -static void udp_flush_pending_frames(struct sock *sk) +void udp_flush_pending_frames(struct sock *sk) { struct udp_sock *up = udp_sk(sk); @@ -430,6 +430,7 @@ static void udp_flush_pending_frames(struct sock *sk) ip_flush_pending_frames(sk); } } +EXPORT_SYMBOL(udp_flush_pending_frames); /** * udp4_hwcsum_outgoing - handle outgoing HW checksumming diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 1b35c47..dd30962 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -534,7 +534,9 @@ static void udp_v6_flush_pending_frames(struct sock *sk) { struct udp_sock *up = udp_sk(sk); - if (up->pending) { + if (up->pending == AF_INET) + udp_flush_pending_frames(sk); + else if (up->pending) { up->len = 0; up->pending = 0; ip6_flush_pending_frames(sk); -- cgit v0.10.2 From 9596cc826e2e52bfc318ca37a6c52fe3d72990a3 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Wed, 4 Jun 2008 15:49:08 +0400 Subject: [IPV6]: Do not change protocol for UDPv6 sockets with pending sent data. Signed-off-by: Denis V. Lunev Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 1afe210..26b83e5 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -164,9 +164,14 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, if (sk->sk_type == SOCK_RAW) break; - if (sk->sk_protocol != IPPROTO_UDP && - sk->sk_protocol != IPPROTO_UDPLITE && - sk->sk_protocol != IPPROTO_TCP) + if (sk->sk_protocol == IPPROTO_UDP || + sk->sk_protocol == IPPROTO_UDPLITE) { + struct udp_sock *up = udp_sk(sk); + if (up->pending == AF_INET6) { + retv = -EBUSY; + break; + } + } else if (sk->sk_protocol != IPPROTO_TCP) break; if (sk->sk_state != TCP_ESTABLISHED) { -- cgit v0.10.2 From a13366c632132bb9f8f2950a79773d8f68f4871e Mon Sep 17 00:00:00 2001 From: Adrian-Ken Rueegsegger Date: Wed, 4 Jun 2008 12:04:55 -0700 Subject: xfrm: xfrm_algo: correct usage of RIPEMD-160 This patch fixes the usage of RIPEMD-160 in xfrm_algo which in turn allows hmac(rmd160) to be used as authentication mechanism in IPsec ESP and AH (see RFC 2857). Signed-off-by: Adrian-Ken Rueegsegger Acked-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/xfrm/xfrm_algo.c b/net/xfrm/xfrm_algo.c index ac765dd..23a2cc0 100644 --- a/net/xfrm/xfrm_algo.c +++ b/net/xfrm/xfrm_algo.c @@ -200,8 +200,8 @@ static struct xfrm_algo_desc aalg_list[] = { } }, { - .name = "hmac(ripemd160)", - .compat = "ripemd160", + .name = "hmac(rmd160)", + .compat = "rmd160", .uinfo = { .auth = { -- cgit v0.10.2 From c03e05d81d70879273488206bfcb1805ebca9612 Mon Sep 17 00:00:00 2001 From: Mark Asselstine Date: Wed, 4 Jun 2008 12:06:28 -0700 Subject: sunhme: Cleanup use of deprecated calls to save_and_cli and restore_flags. Make use of local_irq_save and local_irq_restore rather then the deprecated save_and_cli and restore_flags calls. Signed-off-by: Mark Asselstine Signed-off-by: David S. Miller diff --git a/drivers/net/sunhme.c b/drivers/net/sunhme.c index b4e7f30..1aa425b 100644 --- a/drivers/net/sunhme.c +++ b/drivers/net/sunhme.c @@ -111,7 +111,7 @@ static __inline__ void tx_add_log(struct happy_meal *hp, unsigned int a, unsigne struct hme_tx_logent *tlp; unsigned long flags; - save_and_cli(flags); + local_irq_save(flags); tlp = &tx_log[txlog_cur_entry]; tlp->tstamp = (unsigned int)jiffies; tlp->tx_new = hp->tx_new; @@ -119,7 +119,7 @@ static __inline__ void tx_add_log(struct happy_meal *hp, unsigned int a, unsigne tlp->action = a; tlp->status = s; txlog_cur_entry = (txlog_cur_entry + 1) & (TX_LOG_LEN - 1); - restore_flags(flags); + local_irq_restore(flags); } static __inline__ void tx_dump_log(void) { -- cgit v0.10.2 From a6604471db5e7a33474a7f16c64d6b118fae3e74 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Wed, 4 Jun 2008 12:07:44 -0700 Subject: tcp: fix skb vs fack_count out-of-sync condition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This bug is able to corrupt fackets_out in very rare cases. In order for this to cause corruption: 1) DSACK in the middle of previous SACK block must be generated. 2) In order to take that particular branch, part or all of the DSACKed segment must already be SACKed so that we have that in cache in the first place. 3) The new info must be top enough so that fackets_out will be updated on this iteration. ...then fack_count is updated while skb wasn't, then we walk again that particular segment thus updating fack_count twice for a single skb and finally that value is assigned to fackets_out by tcp_sacktag_one. It is safe to call tcp_sacktag_one just once for a segment (at DSACK), no need to call again for plain SACK. Potential problem of the miscount are limited to premature entry to recovery and to inflated reordering metric (which could even cancel each other out in the most the luckiest scenarios :-)). Both are quite insignificant in worst case too and there exists also code to reset them (fackets_out once sacked_out becomes zero and reordering metric on RTO). This has been reported by a number of people, because it occurred quite rarely, it has been very evasive. Andy Furniss was able to get it to occur couple of times so that a bit more info was collected about the problem using a debug patch, though it still required lot of checking around. Thanks also to others who have tried to help here. This is listed as Bugzilla #10346. The bug was introduced by me in commit 68f8353b48 ([TCP]: Rewrite SACK block processing & sack_recv_cache use), I probably thought back then that there's need to scan that entry twice or didn't dare to make it go through it just once there. Going through twice would have required restoring fack_count after the walk but as noted above, I chose to drop the additional walk step altogether here. Signed-off-by: Ilpo Järvinen Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 54a0b74..eba873e9 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1392,9 +1392,9 @@ static struct sk_buff *tcp_maybe_skipping_dsack(struct sk_buff *skb, if (before(next_dup->start_seq, skip_to_seq)) { skb = tcp_sacktag_skip(skb, sk, next_dup->start_seq, fack_count); - tcp_sacktag_walk(skb, sk, NULL, - next_dup->start_seq, next_dup->end_seq, - 1, fack_count, reord, flag); + skb = tcp_sacktag_walk(skb, sk, NULL, + next_dup->start_seq, next_dup->end_seq, + 1, fack_count, reord, flag); } return skb; -- cgit v0.10.2 From 4141ddc02a92a6e3e5793601554c6033e83c25b9 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Wed, 4 Jun 2008 12:37:33 -0700 Subject: sctp: retran_path update bug fix If the current retran_path is the only active one, it should update it to the the next inactive one. Signed-off-by: Gui Jianfeng Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/associola.c b/net/sctp/associola.c index b4cd2b7..5326348 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -1203,6 +1203,9 @@ void sctp_assoc_update_retran_path(struct sctp_association *asoc) struct list_head *head = &asoc->peer.transport_addr_list; struct list_head *pos; + if (asoc->peer.transport_count == 1) + return; + /* Find the next transport in a round-robin fashion. */ t = asoc->peer.retran_path; pos = &t->transports; @@ -1217,6 +1220,15 @@ void sctp_assoc_update_retran_path(struct sctp_association *asoc) t = list_entry(pos, struct sctp_transport, transports); + /* We have exhausted the list, but didn't find any + * other active transports. If so, use the next + * transport. + */ + if (t == asoc->peer.retran_path) { + t = next; + break; + } + /* Try to find an active transport. */ if ((t->state == SCTP_ACTIVE) || @@ -1229,15 +1241,6 @@ void sctp_assoc_update_retran_path(struct sctp_association *asoc) if (!next) next = t; } - - /* We have exhausted the list, but didn't find any - * other active transports. If so, use the next - * transport. - */ - if (t == asoc->peer.retran_path) { - t = next; - break; - } } asoc->peer.retran_path = t; -- cgit v0.10.2 From 159c6bea37c54dfae44409467e0f17600722d541 Mon Sep 17 00:00:00 2001 From: Gui Jianfeng Date: Wed, 4 Jun 2008 12:38:07 -0700 Subject: sctp: Move sctp_v4_dst_saddr out of loop There's no need to execute sctp_v4_dst_saddr() for each iteration, just move it out of loop. Signed-off-by: Gui Jianfeng Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 13ee7fa..56bdaf7 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -470,11 +470,11 @@ static struct dst_entry *sctp_v4_get_dst(struct sctp_association *asoc, /* Walk through the bind address list and look for a bind * address that matches the source address of the returned dst. */ + sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port)); rcu_read_lock(); list_for_each_entry_rcu(laddr, &bp->address_list, list) { if (!laddr->valid || (laddr->state != SCTP_ADDR_SRC)) continue; - sctp_v4_dst_saddr(&dst_saddr, dst, htons(bp->port)); if (sctp_v4_cmp_addr(&dst_saddr, &laddr->a)) goto out_unlock; } -- cgit v0.10.2 From a6465234814efda9ed1dccdba852953f7508e827 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 4 Jun 2008 12:38:43 -0700 Subject: sctp: Correctly implement Fast Recovery cwnd manipulations. Correctly keep track of Fast Recovery state and do not reduce congestion window multiple times during sucht state. Signed-off-by: Vlad Yasevich Tested-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 917d425..6759207 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -902,7 +902,10 @@ struct sctp_transport { * calculation completes (i.e. the DATA chunk * is SACK'd) clear this flag. */ - int rto_pending; + __u8 rto_pending; + + /* Flag to track the current fast recovery state */ + __u8 fast_recovery; /* * These are the congestion stats. @@ -921,6 +924,9 @@ struct sctp_transport { /* Data that has been sent, but not acknowledged. */ __u32 flight_size; + /* TSN marking the fast recovery exit point */ + __u32 fast_recovery_exit; + /* Destination */ struct dst_entry *dst; /* Source address. */ diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 62082e7..9647fb2 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -79,6 +79,7 @@ static struct sctp_transport *sctp_transport_init(struct sctp_transport *peer, peer->rttvar = 0; peer->srtt = 0; peer->rto_pending = 0; + peer->fast_recovery = 0; peer->last_time_heard = jiffies; peer->last_time_used = jiffies; @@ -403,11 +404,16 @@ void sctp_transport_raise_cwnd(struct sctp_transport *transport, cwnd = transport->cwnd; flight_size = transport->flight_size; + /* See if we need to exit Fast Recovery first */ + if (transport->fast_recovery && + TSN_lte(transport->fast_recovery_exit, sack_ctsn)) + transport->fast_recovery = 0; + /* The appropriate cwnd increase algorithm is performed if, and only - * if the cumulative TSN has advanced and the congestion window is + * if the cumulative TSN whould advanced and the congestion window is * being fully utilized. */ - if ((transport->asoc->ctsn_ack_point >= sack_ctsn) || + if (TSN_lte(sack_ctsn, transport->asoc->ctsn_ack_point) || (flight_size < cwnd)) return; @@ -416,17 +422,23 @@ void sctp_transport_raise_cwnd(struct sctp_transport *transport, pmtu = transport->asoc->pathmtu; if (cwnd <= ssthresh) { - /* RFC 2960 7.2.1, sctpimpguide-05 2.14.2 When cwnd is less - * than or equal to ssthresh an SCTP endpoint MUST use the - * slow start algorithm to increase cwnd only if the current - * congestion window is being fully utilized and an incoming - * SACK advances the Cumulative TSN Ack Point. Only when these - * two conditions are met can the cwnd be increased otherwise - * the cwnd MUST not be increased. If these conditions are met - * then cwnd MUST be increased by at most the lesser of - * 1) the total size of the previously outstanding DATA - * chunk(s) acknowledged, and 2) the destination's path MTU. + /* RFC 4960 7.2.1 + * o When cwnd is less than or equal to ssthresh, an SCTP + * endpoint MUST use the slow-start algorithm to increase + * cwnd only if the current congestion window is being fully + * utilized, an incoming SACK advances the Cumulative TSN + * Ack Point, and the data sender is not in Fast Recovery. + * Only when these three conditions are met can the cwnd be + * increased; otherwise, the cwnd MUST not be increased. + * If these conditions are met, then cwnd MUST be increased + * by, at most, the lesser of 1) the total size of the + * previously outstanding DATA chunk(s) acknowledged, and + * 2) the destination's path MTU. This upper bound protects + * against the ACK-Splitting attack outlined in [SAVAGE99]. */ + if (transport->fast_recovery) + return; + if (bytes_acked > pmtu) cwnd += pmtu; else @@ -502,6 +514,13 @@ void sctp_transport_lower_cwnd(struct sctp_transport *transport, * cwnd = ssthresh * partial_bytes_acked = 0 */ + if (transport->fast_recovery) + return; + + /* Mark Fast recovery */ + transport->fast_recovery = 1; + transport->fast_recovery_exit = transport->asoc->next_tsn - 1; + transport->ssthresh = max(transport->cwnd/2, 4*transport->asoc->pathmtu); transport->cwnd = transport->ssthresh; @@ -586,6 +605,7 @@ void sctp_transport_reset(struct sctp_transport *t) t->flight_size = 0; t->error_count = 0; t->rto_pending = 0; + t->fast_recovery = 0; /* Initialize the state information for SFR-CACC */ t->cacc.changeover_active = 0; -- cgit v0.10.2 From 62aeaff5ccd96462b7077046357a6d7886175a57 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 4 Jun 2008 12:39:11 -0700 Subject: sctp: Start T3-RTX timer when fast retransmitting lowest TSN When we are trying to fast retransmit the lowest outstanding TSN, we need to restart the T3-RTX timer, so that subsequent timeouts will correctly tag all the packets necessary for retransmissions. Signed-off-by: Vlad Yasevich Tested-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 6759207..714dc43 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -1051,7 +1051,7 @@ void sctp_transport_route(struct sctp_transport *, union sctp_addr *, struct sctp_sock *); void sctp_transport_pmtu(struct sctp_transport *); void sctp_transport_free(struct sctp_transport *); -void sctp_transport_reset_timers(struct sctp_transport *); +void sctp_transport_reset_timers(struct sctp_transport *, int); void sctp_transport_hold(struct sctp_transport *); void sctp_transport_put(struct sctp_transport *); void sctp_transport_update_rto(struct sctp_transport *, __u32); @@ -1141,6 +1141,9 @@ struct sctp_outq { /* How many unackd bytes do we have in-flight? */ __u32 outstanding_bytes; + /* Are we doing fast-rtx on this queue */ + char fast_rtx; + /* Corked? */ char cork; diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 59edfd2..5d3c441 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -208,6 +208,7 @@ void sctp_outq_init(struct sctp_association *asoc, struct sctp_outq *q) INIT_LIST_HEAD(&q->sacked); INIT_LIST_HEAD(&q->abandoned); + q->fast_rtx = 0; q->outstanding_bytes = 0; q->empty = 1; q->cork = 0; @@ -500,6 +501,7 @@ void sctp_retransmit(struct sctp_outq *q, struct sctp_transport *transport, case SCTP_RTXR_FAST_RTX: SCTP_INC_STATS(SCTP_MIB_FAST_RETRANSMITS); sctp_transport_lower_cwnd(transport, SCTP_LOWER_CWND_FAST_RTX); + q->fast_rtx = 1; break; case SCTP_RTXR_PMTUD: SCTP_INC_STATS(SCTP_MIB_PMTUD_RETRANSMITS); @@ -543,10 +545,13 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, sctp_xmit_t status; struct sctp_chunk *chunk, *chunk1; struct sctp_association *asoc; + int fast_rtx; int error = 0; + int timer = 0; asoc = q->asoc; lqueue = &q->retransmit; + fast_rtx = q->fast_rtx; /* RFC 2960 6.3.3 Handle T3-rtx Expiration * @@ -587,13 +592,12 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, switch (status) { case SCTP_XMIT_PMTU_FULL: /* Send this packet. */ - if ((error = sctp_packet_transmit(pkt)) == 0) - *start_timer = 1; + error = sctp_packet_transmit(pkt); /* If we are retransmitting, we should only * send a single packet. */ - if (rtx_timeout) { + if (rtx_timeout || fast_rtx) { list_add(lchunk, lqueue); lchunk = NULL; } @@ -603,8 +607,7 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, case SCTP_XMIT_RWND_FULL: /* Send this packet. */ - if ((error = sctp_packet_transmit(pkt)) == 0) - *start_timer = 1; + error = sctp_packet_transmit(pkt); /* Stop sending DATA as there is no more room * at the receiver. @@ -615,8 +618,7 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, case SCTP_XMIT_NAGLE_DELAY: /* Send this packet. */ - if ((error = sctp_packet_transmit(pkt)) == 0) - *start_timer = 1; + error = sctp_packet_transmit(pkt); /* Stop sending DATA because of nagle delay. */ list_add(lchunk, lqueue); @@ -635,7 +637,14 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, if (chunk->fast_retransmit > 0) chunk->fast_retransmit = -1; - *start_timer = 1; + /* Force start T3-rtx timer when fast retransmitting + * the earliest outstanding TSN + */ + if (!timer && fast_rtx && + ntohl(chunk->subh.data_hdr->tsn) == + asoc->ctsn_ack_point + 1) + timer = 2; + q->empty = 0; /* Retrieve a new chunk to bundle. */ @@ -643,12 +652,16 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, break; } + /* Set the timer if there were no errors */ + if (!error && !timer) + timer = 1; + /* If we are here due to a retransmit timeout or a fast * retransmit and if there are any chunks left in the retransmit * queue that could not fit in the PMTU sized packet, they need * to be marked as ineligible for a subsequent fast retransmit. */ - if (rtx_timeout && !lchunk) { + if (rtx_timeout && fast_rtx) { list_for_each_entry(chunk1, lqueue, transmitted_list) { if (chunk1->fast_retransmit > 0) chunk1->fast_retransmit = -1; @@ -656,6 +669,12 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, } } + *start_timer = timer; + + /* Clear fast retransmit hint */ + if (fast_rtx) + q->fast_rtx = 0; + return error; } @@ -862,7 +881,8 @@ int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout) rtx_timeout, &start_timer); if (start_timer) - sctp_transport_reset_timers(transport); + sctp_transport_reset_timers(transport, + start_timer-1); /* This can happen on COOKIE-ECHO resend. Only * one chunk can get bundled with a COOKIE-ECHO. @@ -977,7 +997,7 @@ int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout) list_add_tail(&chunk->transmitted_list, &transport->transmitted); - sctp_transport_reset_timers(transport); + sctp_transport_reset_timers(transport, start_timer-1); q->empty = 0; diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 9647fb2..3f34f61 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -191,7 +191,7 @@ static void sctp_transport_destroy(struct sctp_transport *transport) /* Start T3_rtx timer if it is not already running and update the heartbeat * timer. This routine is called every time a DATA chunk is sent. */ -void sctp_transport_reset_timers(struct sctp_transport *transport) +void sctp_transport_reset_timers(struct sctp_transport *transport, int force) { /* RFC 2960 6.3.2 Retransmission Timer Rules * @@ -201,7 +201,7 @@ void sctp_transport_reset_timers(struct sctp_transport *transport) * address. */ - if (!timer_pending(&transport->T3_rtx_timer)) + if (force || !timer_pending(&transport->T3_rtx_timer)) if (!mod_timer(&transport->T3_rtx_timer, jiffies + transport->rto)) sctp_transport_hold(transport); -- cgit v0.10.2 From 8b750ce54bd8ab5f75d519ee450e1b0c5226ebe9 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 4 Jun 2008 12:39:36 -0700 Subject: sctp: Flush the queue only once during fast retransmit. When fast retransmit is triggered by a sack, we should flush the queue only once so that only 1 retransmit happens. Also, since we could potentially have non-fast-rtx chunks on the retransmit queue, we need make sure any chunks eligable for fast retransmit are sent first during fast retransmission. Signed-off-by: Vlad Yasevich Tested-by: Wei Yongjun Signed-off-by: David S. Miller diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 5d3c441..ace6770 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -520,9 +520,15 @@ void sctp_retransmit(struct sctp_outq *q, struct sctp_transport *transport, * the sender SHOULD try to advance the "Advanced.Peer.Ack.Point" by * following the procedures outlined in C1 - C5. */ - sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point); + if (reason == SCTP_RTXR_T3_RTX) + sctp_generate_fwdtsn(q, q->asoc->ctsn_ack_point); - error = sctp_outq_flush(q, /* rtx_timeout */ 1); + /* Flush the queues only on timeout, since fast_rtx is only + * triggered during sack processing and the queue + * will be flushed at the end. + */ + if (reason != SCTP_RTXR_FAST_RTX) + error = sctp_outq_flush(q, /* rtx_timeout */ 1); if (error) q->asoc->base.sk->sk_err = -error; @@ -540,7 +546,6 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, int rtx_timeout, int *start_timer) { struct list_head *lqueue; - struct list_head *lchunk; struct sctp_transport *transport = pkt->transport; sctp_xmit_t status; struct sctp_chunk *chunk, *chunk1; @@ -548,12 +553,16 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, int fast_rtx; int error = 0; int timer = 0; + int done = 0; asoc = q->asoc; lqueue = &q->retransmit; fast_rtx = q->fast_rtx; - /* RFC 2960 6.3.3 Handle T3-rtx Expiration + /* This loop handles time-out retransmissions, fast retransmissions, + * and retransmissions due to opening of whindow. + * + * RFC 2960 6.3.3 Handle T3-rtx Expiration * * E3) Determine how many of the earliest (i.e., lowest TSN) * outstanding DATA chunks for the address for which the @@ -568,12 +577,12 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, * [Just to be painfully clear, if we are retransmitting * because a timeout just happened, we should send only ONE * packet of retransmitted data.] + * + * For fast retransmissions we also send only ONE packet. However, + * if we are just flushing the queue due to open window, we'll + * try to send as much as possible. */ - lchunk = sctp_list_dequeue(lqueue); - - while (lchunk) { - chunk = list_entry(lchunk, struct sctp_chunk, - transmitted_list); + list_for_each_entry_safe(chunk, chunk1, lqueue, transmitted_list) { /* Make sure that Gap Acked TSNs are not retransmitted. A * simple approach is just to move such TSNs out of the @@ -581,11 +590,18 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, * next chunk. */ if (chunk->tsn_gap_acked) { - list_add_tail(lchunk, &transport->transmitted); - lchunk = sctp_list_dequeue(lqueue); + list_del(&chunk->transmitted_list); + list_add_tail(&chunk->transmitted_list, + &transport->transmitted); continue; } + /* If we are doing fast retransmit, ignore non-fast_rtransmit + * chunks + */ + if (fast_rtx && !chunk->fast_retransmit) + continue; + /* Attempt to append this chunk to the packet. */ status = sctp_packet_append_chunk(pkt, chunk); @@ -597,12 +613,10 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, /* If we are retransmitting, we should only * send a single packet. */ - if (rtx_timeout || fast_rtx) { - list_add(lchunk, lqueue); - lchunk = NULL; - } + if (rtx_timeout || fast_rtx) + done = 1; - /* Bundle lchunk in the next round. */ + /* Bundle next chunk in the next round. */ break; case SCTP_XMIT_RWND_FULL: @@ -612,8 +626,7 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, /* Stop sending DATA as there is no more room * at the receiver. */ - list_add(lchunk, lqueue); - lchunk = NULL; + done = 1; break; case SCTP_XMIT_NAGLE_DELAY: @@ -621,15 +634,16 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, error = sctp_packet_transmit(pkt); /* Stop sending DATA because of nagle delay. */ - list_add(lchunk, lqueue); - lchunk = NULL; + done = 1; break; default: /* The append was successful, so add this chunk to * the transmitted list. */ - list_add_tail(lchunk, &transport->transmitted); + list_del(&chunk->transmitted_list); + list_add_tail(&chunk->transmitted_list, + &transport->transmitted); /* Mark the chunk as ineligible for fast retransmit * after it is retransmitted. @@ -646,9 +660,6 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, timer = 2; q->empty = 0; - - /* Retrieve a new chunk to bundle. */ - lchunk = sctp_list_dequeue(lqueue); break; } @@ -656,16 +667,19 @@ static int sctp_outq_flush_rtx(struct sctp_outq *q, struct sctp_packet *pkt, if (!error && !timer) timer = 1; - /* If we are here due to a retransmit timeout or a fast - * retransmit and if there are any chunks left in the retransmit - * queue that could not fit in the PMTU sized packet, they need - * to be marked as ineligible for a subsequent fast retransmit. - */ - if (rtx_timeout && fast_rtx) { - list_for_each_entry(chunk1, lqueue, transmitted_list) { - if (chunk1->fast_retransmit > 0) - chunk1->fast_retransmit = -1; - } + if (done) + break; + } + + /* If we are here due to a retransmit timeout or a fast + * retransmit and if there are any chunks left in the retransmit + * queue that could not fit in the PMTU sized packet, they need + * to be marked as ineligible for a subsequent fast retransmit. + */ + if (rtx_timeout || fast_rtx) { + list_for_each_entry(chunk1, lqueue, transmitted_list) { + if (chunk1->fast_retransmit > 0) + chunk1->fast_retransmit = -1; } } -- cgit v0.10.2 From b9031d9d87b24e24cd32ea15b5f4220a1e8da909 Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Wed, 4 Jun 2008 12:40:15 -0700 Subject: sctp: Fix ECN markings for IPv6 Commit e9df2e8fd8fbc95c57dbd1d33dada66c4627b44c ("[IPV6]: Use appropriate sock tclass setting for routing lookup.") also changed the way that ECN capable transports mark this capability in IPv6. As a result, SCTP was not marking ECN capablity because the traffic class was never set. This patch brings back the markings for IPv6 traffic. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/include/net/sctp/structs.h b/include/net/sctp/structs.h index 714dc43..7f25195 100644 --- a/include/net/sctp/structs.h +++ b/include/net/sctp/structs.h @@ -588,6 +588,7 @@ struct sctp_af { int (*is_ce) (const struct sk_buff *sk); void (*seq_dump_addr)(struct seq_file *seq, union sctp_addr *addr); + void (*ecn_capable)(struct sock *sk); __u16 net_header_len; int sockaddr_len; sa_family_t sa_family; diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c index e4aac32..a2f4d4d 100644 --- a/net/sctp/ipv6.c +++ b/net/sctp/ipv6.c @@ -727,6 +727,11 @@ static void sctp_v6_seq_dump_addr(struct seq_file *seq, union sctp_addr *addr) seq_printf(seq, NIP6_FMT " ", NIP6(addr->v6.sin6_addr)); } +static void sctp_v6_ecn_capable(struct sock *sk) +{ + inet6_sk(sk)->tclass |= INET_ECN_ECT_0; +} + /* Initialize a PF_INET6 socket msg_name. */ static void sctp_inet6_msgname(char *msgname, int *addr_len) { @@ -997,6 +1002,7 @@ static struct sctp_af sctp_af_inet6 = { .skb_iif = sctp_v6_skb_iif, .is_ce = sctp_v6_is_ce, .seq_dump_addr = sctp_v6_seq_dump_addr, + .ecn_capable = sctp_v6_ecn_capable, .net_header_len = sizeof(struct ipv6hdr), .sockaddr_len = sizeof(struct sockaddr_in6), #ifdef CONFIG_COMPAT diff --git a/net/sctp/output.c b/net/sctp/output.c index cf4f9fb..6d45bae 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -548,7 +548,7 @@ int sctp_packet_transmit(struct sctp_packet *packet) * Note: The works for IPv6 layer checks this bit too later * in transmission. See IP6_ECN_flow_xmit(). */ - INET_ECN_xmit(nskb->sk); + (*tp->af_specific->ecn_capable)(nskb->sk); /* Set up the IP options. */ /* BUG: not implemented diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index 56bdaf7..b435a19 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -617,6 +617,11 @@ static void sctp_v4_seq_dump_addr(struct seq_file *seq, union sctp_addr *addr) seq_printf(seq, "%d.%d.%d.%d ", NIPQUAD(addr->v4.sin_addr)); } +static void sctp_v4_ecn_capable(struct sock *sk) +{ + INET_ECN_xmit(sk); +} + /* Event handler for inet address addition/deletion events. * The sctp_local_addr_list needs to be protocted by a spin lock since * multiple notifiers (say IPv4 and IPv6) may be running at the same @@ -935,6 +940,7 @@ static struct sctp_af sctp_af_inet = { .skb_iif = sctp_v4_skb_iif, .is_ce = sctp_v4_is_ce, .seq_dump_addr = sctp_v4_seq_dump_addr, + .ecn_capable = sctp_v4_ecn_capable, .net_header_len = sizeof(struct iphdr), .sockaddr_len = sizeof(struct sockaddr_in), #ifdef CONFIG_COMPAT -- cgit v0.10.2 From 48e6c51bd326ce9faf07fbdf84d361c9755b7035 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 22 May 2008 17:06:36 +0200 Subject: b43legacy: Fix controller restart crash This fixes a kernel crash on rmmod, in the case where the controller was restarted before doing the rmmod. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 14a5eea..204077c 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -3039,7 +3039,6 @@ static void b43legacy_set_pretbtt(struct b43legacy_wldev *dev) /* Locking: wl->mutex */ static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev) { - struct b43legacy_wl *wl = dev->wl; struct b43legacy_phy *phy = &dev->phy; u32 macctl; @@ -3054,12 +3053,6 @@ static void b43legacy_wireless_core_exit(struct b43legacy_wldev *dev) macctl |= B43legacy_MACCTL_PSM_JMP0; b43legacy_write32(dev, B43legacy_MMIO_MACCTL, macctl); - mutex_unlock(&wl->mutex); - /* Must unlock as it would otherwise deadlock. No races here. - * Cancel possibly pending workqueues. */ - cancel_work_sync(&dev->restart_work); - mutex_lock(&wl->mutex); - b43legacy_leds_exit(dev); b43legacy_rng_exit(dev->wl); b43legacy_pio_free(dev); @@ -3486,6 +3479,8 @@ static void b43legacy_chip_reset(struct work_struct *work) } } out: + if (err) + wl->current_dev = NULL; /* Failed to init the dev. */ mutex_unlock(&wl->mutex); if (err) b43legacyerr(wl, "Controller restart FAILED\n"); @@ -3618,9 +3613,11 @@ static void b43legacy_one_core_detach(struct ssb_device *dev) struct b43legacy_wldev *wldev; struct b43legacy_wl *wl; + /* Do not cancel ieee80211-workqueue based work here. + * See comment in b43legacy_remove(). */ + wldev = ssb_get_drvdata(dev); wl = wldev->wl; - cancel_work_sync(&wldev->restart_work); b43legacy_debugfs_remove_device(wldev); b43legacy_wireless_core_detach(wldev); list_del(&wldev->list); @@ -3789,6 +3786,10 @@ static void b43legacy_remove(struct ssb_device *dev) struct b43legacy_wl *wl = ssb_get_devtypedata(dev); struct b43legacy_wldev *wldev = ssb_get_drvdata(dev); + /* We must cancel any work here before unregistering from ieee80211, + * as the ieee80211 unreg will destroy the workqueue. */ + cancel_work_sync(&wldev->restart_work); + B43legacy_WARN_ON(!wl); if (wl->current_dev == wldev) ieee80211_unregister_hw(wl->hw); -- cgit v0.10.2 From b212f3378a9cfca4da52d7c7e6f79ead8ec287fc Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 28 May 2008 12:40:39 -0700 Subject: airo warning fix WARNING: space prohibited between function name and open parenthesis '(' #22: FILE: drivers/net/wireless/airo.c:2907: + while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { total: 0 errors, 1 warnings, 8 lines checked ./patches/wireless-airo-waitbusy-wont-delay.patch has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS. Please run checkpatch prior to sending patches Cc: Dan Williams Cc: Roel Kluin Signed-off-by: Andrew Morton Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c index 4e1c690..32019fb 100644 --- a/drivers/net/wireless/airo.c +++ b/drivers/net/wireless/airo.c @@ -2905,7 +2905,7 @@ EXPORT_SYMBOL(init_airo_card); static int waitbusy (struct airo_info *ai) { int delay = 0; - while ((IN4500 (ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { + while ((IN4500(ai, COMMAND) & COMMAND_BUSY) && (delay < 10000)) { udelay (10); if ((++delay % 20) == 0) OUT4500(ai, EVACK, EV_CLEARCOMMANDBUSY); -- cgit v0.10.2 From a6d4eae80157830af9c9d80de2daf6611696a34e Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 29 May 2008 14:38:28 -0400 Subject: ipw2200: expire and use oldest BSS on adhoc create If there are no networks on the free list, expire the oldest one when creating a new adhoc network. Because ipw2200 and the ieee80211 stack don't actually cull old networks and place them back on the free list unless they are needed for new probe responses, over time the free list would become empty and creating an adhoc network would fail due to the ! list_empty(...) check. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index d74c061..7293367 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -7558,8 +7558,31 @@ static int ipw_associate(void *data) priv->ieee->iw_mode == IW_MODE_ADHOC && priv->config & CFG_ADHOC_CREATE && priv->config & CFG_STATIC_ESSID && - priv->config & CFG_STATIC_CHANNEL && - !list_empty(&priv->ieee->network_free_list)) { + priv->config & CFG_STATIC_CHANNEL) { + /* Use oldest network if the free list is empty */ + if (list_empty(&priv->ieee->network_free_list)) { + struct ieee80211_network *oldest = NULL; + struct ieee80211_network *target; + DECLARE_MAC_BUF(mac); + + list_for_each_entry(target, &priv->ieee->network_list, list) { + if ((oldest == NULL) || + (target->last_scanned < oldest->last_scanned)) + oldest = target; + } + + /* If there are no more slots, expire the oldest */ + list_del(&oldest->list); + target = oldest; + IPW_DEBUG_ASSOC("Expired '%s' (%s) from " + "network list.\n", + escape_essid(target->ssid, + target->ssid_len), + print_mac(mac, target->bssid)); + list_add_tail(&target->list, + &priv->ieee->network_free_list); + } + element = priv->ieee->network_free_list.next; network = list_entry(element, struct ieee80211_network, list); ipw_adhoc_create(priv, network); -- cgit v0.10.2 From a75eda43dc4a64d0bd0502da546871c01f70e899 Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Fri, 30 May 2008 14:53:22 +0200 Subject: libertas: fix command size for CMD_802_11_SUBSCRIBE_EVENT The size was two small by two bytes. Signed-off-by: Holger Schurig Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/debugfs.c b/drivers/net/wireless/libertas/debugfs.c index ad2fabc..0aa0ce3 100644 --- a/drivers/net/wireless/libertas/debugfs.c +++ b/drivers/net/wireless/libertas/debugfs.c @@ -312,8 +312,8 @@ static ssize_t lbs_threshold_write(uint16_t tlv_type, uint16_t event_mask, if (tlv_type != TLV_TYPE_BCNMISS) tlv->freq = freq; - /* The command header, the event mask, and the one TLV */ - events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 2 + sizeof(*tlv)); + /* The command header, the action, the event mask, and one TLV */ + events->hdr.size = cpu_to_le16(sizeof(events->hdr) + 4 + sizeof(*tlv)); ret = lbs_cmd_with_response(priv, CMD_802_11_SUBSCRIBE_EVENT, events); -- cgit v0.10.2 From a3bafeedfff2ac5fa0a316bea4570e27900b6fcc Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Mon, 2 Jun 2008 16:15:23 +0200 Subject: ssb: Fix context assertion in ssb_pcicore_dev_irqvecs_enable This fixes a context assertion in ssb that makes b44 print out warnings on resume. This fixes the following kernel oops: http://www.kerneloops.org/oops.php?number=12732 http://www.kerneloops.org/oops.php?number=11410 Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c index 75def13..d28c538 100644 --- a/drivers/ssb/driver_pcicore.c +++ b/drivers/ssb/driver_pcicore.c @@ -537,12 +537,12 @@ int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, int err = 0; u32 tmp; - might_sleep(); - if (!pdev) goto out; bus = pdev->bus; + might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); + /* Enable interrupts for this device. */ if (bus->host_pci && ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) { -- cgit v0.10.2 From 4546002c813568829b70d00fab752de3999c3f1a Mon Sep 17 00:00:00 2001 From: Felix Homann Date: Thu, 29 May 2008 00:36:45 -0700 Subject: USB ID for Philips CPWUA054/00 Wireless USB Adapter 11g Enable the Philips CPWUA054/00 in p54usb. Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 98ddbb3..1610a73 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -49,6 +49,7 @@ static struct usb_device_id p54u_table[] __devinitdata = { {USB_DEVICE(0x5041, 0x2235)}, /* Linksys WUSB54G Portable */ /* Version 2 devices (3887) */ + {USB_DEVICE(0x0471, 0x1230)}, /* Philips CPWUA054/00 */ {USB_DEVICE(0x050d, 0x7050)}, /* Belkin F5D7050 ver 1000 */ {USB_DEVICE(0x0572, 0x2000)}, /* Cohiba Proto board */ {USB_DEVICE(0x0572, 0x2002)}, /* Cohiba Proto board */ -- cgit v0.10.2 From 199f7d24ae59894243687a234a909f44a8724506 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 4 Jun 2008 15:07:32 -0700 Subject: lt2p: Fix possible WARN_ON from socket code when UDP socket is closed If an L2TP daemon closes a tunnel socket while packets are queued in the tunnel's reorder queue, a kernel warning is logged because the socket is closed while skbs are still referencing it. The fix is to purge the queue in the socket's release handler. WARNING: at include/net/sock.h:351 udp_lib_unhash+0x41/0x68() Pid: 12998, comm: openl2tpd Not tainted 2.6.25 #8 [] warn_on_slowpath+0x41/0x51 [] udp_lib_unhash+0x41/0x68 [] sk_common_release+0x23/0x90 [] udp_lib_close+0x8/0xa [] inet_release+0x42/0x48 [] sock_release+0x14/0x60 [] sock_close+0x29/0x30 [] __fput+0xad/0x15b [] fput+0x17/0x19 [] filp_close+0x50/0x5a [] sys_close+0x69/0x9f [] syscall_call+0x7/0xb Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 8db342f..04c7e5b 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -1279,6 +1279,7 @@ out: static int pppol2tp_release(struct socket *sock) { struct sock *sk = sock->sk; + struct pppol2tp_session *session; int error; if (!sk) @@ -1296,9 +1297,18 @@ static int pppol2tp_release(struct socket *sock) sock_orphan(sk); sock->sk = NULL; + session = pppol2tp_sock_to_session(sk); + /* Purge any queued data */ skb_queue_purge(&sk->sk_receive_queue); skb_queue_purge(&sk->sk_write_queue); + if (session != NULL) { + struct sk_buff *skb; + while ((skb = skb_dequeue(&session->reorder_q))) { + kfree_skb(skb); + sock_put(sk); + } + } release_sock(sk); -- cgit v0.10.2 From 22dd485022f3d0b162ceb5e67d85de7c3806aa20 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Wed, 4 Jun 2008 15:16:12 -0700 Subject: raw: Raw socket leak. The program below just leaks the raw kernel socket int main() { int fd = socket(PF_INET, SOCK_RAW, IPPROTO_UDP); struct sockaddr_in addr; memset(&addr, 0, sizeof(addr)); inet_aton("127.0.0.1", &addr.sin_addr); addr.sin_family = AF_INET; addr.sin_port = htons(2048); sendto(fd, "a", 1, MSG_MORE, &addr, sizeof(addr)); return 0; } Corked packet is allocated via sock_wmalloc which holds the owner socket, so one should uncork it and flush all pending data on close. Do this in the same way as in UDP. Signed-off-by: Denis V. Lunev Acked-by: Alexey Kuznetsov Signed-off-by: David S. Miller diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index fead049..e7e091d 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -608,6 +608,14 @@ static void raw_close(struct sock *sk, long timeout) sk_common_release(sk); } +static int raw_destroy(struct sock *sk) +{ + lock_sock(sk); + ip_flush_pending_frames(sk); + release_sock(sk); + return 0; +} + /* This gets rid of all the nasties in af_inet. -DaveM */ static int raw_bind(struct sock *sk, struct sockaddr *uaddr, int addr_len) { @@ -820,6 +828,7 @@ struct proto raw_prot = { .name = "RAW", .owner = THIS_MODULE, .close = raw_close, + .destroy = raw_destroy, .connect = ip4_datagram_connect, .disconnect = udp_disconnect, .ioctl = raw_ioctl, diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 603df76..8fee9a1 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1164,6 +1164,14 @@ static void rawv6_close(struct sock *sk, long timeout) sk_common_release(sk); } +static int raw6_destroy(struct sock *sk) +{ + lock_sock(sk); + ip6_flush_pending_frames(sk); + release_sock(sk); + return 0; +} + static int rawv6_init_sk(struct sock *sk) { struct raw6_sock *rp = raw6_sk(sk); @@ -1187,6 +1195,7 @@ struct proto rawv6_prot = { .name = "RAWv6", .owner = THIS_MODULE, .close = rawv6_close, + .destroy = raw6_destroy, .connect = ip6_datagram_connect, .disconnect = udp_disconnect, .ioctl = rawv6_ioctl, -- cgit v0.10.2 From 26af65cbeb2467a486ae4fc7242c94e470c67c50 Mon Sep 17 00:00:00 2001 From: Sridhar Samudrala Date: Wed, 4 Jun 2008 15:19:35 -0700 Subject: tcp: Increment OUTRSTS in tcp_send_active_reset() TCP "resets sent" counter is not incremented when a TCP Reset is sent via tcp_send_active_reset(). Signed-off-by: Sridhar Samudrala Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index e399bde..ad993ec 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2131,6 +2131,8 @@ void tcp_send_active_reset(struct sock *sk, gfp_t priority) TCP_SKB_CB(skb)->when = tcp_time_stamp; if (tcp_transmit_skb(sk, skb, 0, priority)) NET_INC_STATS(LINUX_MIB_TCPABORTFAILED); + + TCP_INC_STATS(TCP_MIB_OUTRSTS); } /* WARNING: This routine must only be called when we have already sent -- cgit v0.10.2 From 293ad60401da621b8b329abbe8c388edb25f658a Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Wed, 4 Jun 2008 15:45:58 -0700 Subject: tcp: Fix for race due to temporary drop of the socket lock in skb_splice_bits. skb_splice_bits temporary drops the socket lock while iterating over the socket queue in order to break a reverse locking condition which happens with sendfile. This, however, opens a window of opportunity for tcp_collapse() to aggregate skbs and thus potentially free the current skb used in skb_splice_bits and tcp_read_sock. This patch fixes the problem by (re-)getting the same "logical skb" after the lock has been temporary dropped. Based on idea and initial patch from Evgeniy Polyakov. Signed-off-by: Octavian Purdila Acked-by: Evgeniy Polyakov Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 5c459f2..1e556d3 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1445,6 +1445,7 @@ done: if (spd.nr_pages) { int ret; + struct sock *sk = __skb->sk; /* * Drop the socket lock, otherwise we have reverse @@ -1455,9 +1456,9 @@ done: * we call into ->sendpage() with the i_mutex lock held * and networking will grab the socket lock. */ - release_sock(__skb->sk); + release_sock(sk); ret = splice_to_pipe(pipe, &spd); - lock_sock(__skb->sk); + lock_sock(sk); return ret; } diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index f886531..ab66683 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -1227,7 +1227,14 @@ int tcp_read_sock(struct sock *sk, read_descriptor_t *desc, copied += used; offset += used; } - if (offset != skb->len) + /* + * If recv_actor drops the lock (e.g. TCP splice + * receive) the skb pointer might be invalid when + * getting here: tcp_collapse might have deleted it + * while aggregating skbs from the socket queue. + */ + skb = tcp_recv_skb(sk, seq-1, &offset); + if (!skb || (offset+1 != skb->len)) break; } if (tcp_hdr(skb)->fin) { -- cgit v0.10.2 From 24b95685ffcdb3dc28f64b9e8af6ea3e8360fbc5 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Wed, 4 Jun 2008 15:54:07 -0700 Subject: l2tp: Fix possible oops if transmitting or receiving when tunnel goes down Some problems have been experienced in the field which cause an oops in the pppol2tp driver if L2TP tunnels fail while passing data. The pppol2tp driver uses private data that is referenced via the sk->sk_user_data of its UDP and PPPoL2TP sockets. This patch makes sure that the driver uses sock_hold() when it holds a reference to the sk pointer. This affects its sendmsg(), recvmsg(), getname(), [gs]etsockopt() and ioctl() handlers. Tested by ISP where problem was seen. System has been up 10 days with no oops since running this patch. Without the patch, an oops would occur every 1-2 days. Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 04c7e5b..70cfdb4 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -240,12 +240,15 @@ static inline struct pppol2tp_session *pppol2tp_sock_to_session(struct sock *sk) if (sk == NULL) return NULL; + sock_hold(sk); session = (struct pppol2tp_session *)(sk->sk_user_data); - if (session == NULL) - return NULL; + if (session == NULL) { + sock_put(sk); + goto out; + } BUG_ON(session->magic != L2TP_SESSION_MAGIC); - +out: return session; } @@ -256,12 +259,15 @@ static inline struct pppol2tp_tunnel *pppol2tp_sock_to_tunnel(struct sock *sk) if (sk == NULL) return NULL; + sock_hold(sk); tunnel = (struct pppol2tp_tunnel *)(sk->sk_user_data); - if (tunnel == NULL) - return NULL; + if (tunnel == NULL) { + sock_put(sk); + goto out; + } BUG_ON(tunnel->magic != L2TP_TUNNEL_MAGIC); - +out: return tunnel; } @@ -716,12 +722,14 @@ discard: session->stats.rx_errors++; kfree_skb(skb); sock_put(session->sock); + sock_put(sock); return 0; error: /* Put UDP header back */ __skb_push(skb, sizeof(struct udphdr)); + sock_put(sock); no_tunnel: return 1; @@ -745,10 +753,13 @@ static int pppol2tp_udp_encap_recv(struct sock *sk, struct sk_buff *skb) "%s: received %d bytes\n", tunnel->name, skb->len); if (pppol2tp_recv_core(sk, skb)) - goto pass_up; + goto pass_up_put; + sock_put(sk); return 0; +pass_up_put: + sock_put(sk); pass_up: return 1; } @@ -858,7 +869,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto error; + goto error_put_sess; /* What header length is configured for this session? */ hdr_len = pppol2tp_l2tp_header_len(session); @@ -870,7 +881,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh sizeof(ppph) + total_len, 0, GFP_KERNEL); if (!skb) - goto error; + goto error_put_sess_tun; /* Reserve space for headers. */ skb_reserve(skb, NET_SKB_PAD); @@ -900,7 +911,7 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh error = memcpy_fromiovec(skb->data, m->msg_iov, total_len); if (error < 0) { kfree_skb(skb); - goto error; + goto error_put_sess_tun; } skb_put(skb, total_len); @@ -947,10 +958,33 @@ static int pppol2tp_sendmsg(struct kiocb *iocb, struct socket *sock, struct msgh session->stats.tx_errors++; } + return error; + +error_put_sess_tun: + sock_put(session->tunnel_sock); +error_put_sess: + sock_put(sk); error: return error; } +/* Automatically called when the skb is freed. + */ +static void pppol2tp_sock_wfree(struct sk_buff *skb) +{ + sock_put(skb->sk); +} + +/* For data skbs that we transmit, we associate with the tunnel socket + * but don't do accounting. + */ +static inline void pppol2tp_skb_set_owner_w(struct sk_buff *skb, struct sock *sk) +{ + sock_hold(sk); + skb->sk = sk; + skb->destructor = pppol2tp_sock_wfree; +} + /* Transmit function called by generic PPP driver. Sends PPP frame * over PPPoL2TP socket. * @@ -993,10 +1027,10 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) sk_tun = session->tunnel_sock; if (sk_tun == NULL) - goto abort; + goto abort_put_sess; tunnel = pppol2tp_sock_to_tunnel(sk_tun); if (tunnel == NULL) - goto abort; + goto abort_put_sess; /* What header length is configured for this session? */ hdr_len = pppol2tp_l2tp_header_len(session); @@ -1009,7 +1043,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) sizeof(struct udphdr) + hdr_len + sizeof(ppph); old_headroom = skb_headroom(skb); if (skb_cow_head(skb, headroom)) - goto abort; + goto abort_put_sess_tun; new_headroom = skb_headroom(skb); skb_orphan(skb); @@ -1069,7 +1103,7 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) /* Get routing info from the tunnel socket */ dst_release(skb->dst); skb->dst = dst_clone(__sk_dst_get(sk_tun)); - skb->sk = sk_tun; + pppol2tp_skb_set_owner_w(skb, sk_tun); /* Queue the packet to IP for output */ len = skb->len; @@ -1086,8 +1120,14 @@ static int pppol2tp_xmit(struct ppp_channel *chan, struct sk_buff *skb) session->stats.tx_errors++; } + sock_put(sk_tun); + sock_put(sk); return 1; +abort_put_sess_tun: + sock_put(sk_tun); +abort_put_sess: + sock_put(sk); abort: /* Free the original skb */ kfree_skb(skb); @@ -1191,7 +1231,7 @@ static void pppol2tp_tunnel_destruct(struct sock *sk) { struct pppol2tp_tunnel *tunnel; - tunnel = pppol2tp_sock_to_tunnel(sk); + tunnel = sk->sk_user_data; if (tunnel == NULL) goto end; @@ -1230,10 +1270,12 @@ static void pppol2tp_session_destruct(struct sock *sk) if (sk->sk_user_data != NULL) { struct pppol2tp_tunnel *tunnel; - session = pppol2tp_sock_to_session(sk); + session = sk->sk_user_data; if (session == NULL) goto out; + BUG_ON(session->magic != L2TP_SESSION_MAGIC); + /* Don't use pppol2tp_sock_to_tunnel() here to * get the tunnel context because the tunnel * socket might have already been closed (its @@ -1611,7 +1653,7 @@ static int pppol2tp_connect(struct socket *sock, struct sockaddr *uservaddr, error = ppp_register_channel(&po->chan); if (error) - goto end; + goto end_put_tun; /* This is how we get the session context from the socket. */ sk->sk_user_data = session; @@ -1631,6 +1673,8 @@ out_no_ppp: PRINTK(session->debug, PPPOL2TP_MSG_CONTROL, KERN_INFO, "%s: created\n", session->name); +end_put_tun: + sock_put(tunnel_sock); end: release_sock(sk); @@ -1678,6 +1722,7 @@ static int pppol2tp_getname(struct socket *sock, struct sockaddr *uaddr, *usockaddr_len = len; error = 0; + sock_put(sock->sk); end: return error; @@ -1916,14 +1961,17 @@ static int pppol2tp_ioctl(struct socket *sock, unsigned int cmd, err = -EBADF; tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto end; + goto end_put_sess; err = pppol2tp_tunnel_ioctl(tunnel, cmd, arg); - goto end; + sock_put(session->tunnel_sock); + goto end_put_sess; } err = pppol2tp_session_ioctl(session, cmd, arg); +end_put_sess: + sock_put(sk); end: return err; } @@ -2069,14 +2117,17 @@ static int pppol2tp_setsockopt(struct socket *sock, int level, int optname, err = -EBADF; tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto end; + goto end_put_sess; err = pppol2tp_tunnel_setsockopt(sk, tunnel, optname, val); + sock_put(session->tunnel_sock); } else err = pppol2tp_session_setsockopt(sk, session, optname, val); err = 0; +end_put_sess: + sock_put(sk); end: return err; } @@ -2191,20 +2242,24 @@ static int pppol2tp_getsockopt(struct socket *sock, int level, err = -EBADF; tunnel = pppol2tp_sock_to_tunnel(session->tunnel_sock); if (tunnel == NULL) - goto end; + goto end_put_sess; err = pppol2tp_tunnel_getsockopt(sk, tunnel, optname, &val); + sock_put(session->tunnel_sock); } else err = pppol2tp_session_getsockopt(sk, session, optname, &val); err = -EFAULT; if (put_user(len, (int __user *) optlen)) - goto end; + goto end_put_sess; if (copy_to_user((void __user *) optval, &val, len)) - goto end; + goto end_put_sess; err = 0; + +end_put_sess: + sock_put(sk); end: return err; } -- cgit v0.10.2 From 53c8ba95402be65d412a806cda3430f0e72cd107 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Wed, 4 Jun 2008 20:10:44 -0700 Subject: Linux 2.6.26-rc5 diff --git a/Makefile b/Makefile index 8db70fe..2b95120 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc4 +EXTRAVERSION = -rc5 NAME = Funky Weasel is Jiggy wit it # *DOCUMENTATION* -- cgit v0.10.2 From ba75321193900a236bc5bbc29145e1039f74eb1b Mon Sep 17 00:00:00 2001 From: Kyungmin Park Date: Wed, 7 May 2008 11:54:10 +0900 Subject: [MTD] [MAPS] Fix cmdlineparse handling in mapping files Now it returns the 0 if cmdlineparse not supplied. Signed-off-by: Kyungmin Park Signed-off-by: David Woodhouse diff --git a/drivers/mtd/maps/omap_nor.c b/drivers/mtd/maps/omap_nor.c index 240b0e2..c12d805 100644 --- a/drivers/mtd/maps/omap_nor.c +++ b/drivers/mtd/maps/omap_nor.c @@ -110,7 +110,7 @@ static int __init omapflash_probe(struct platform_device *pdev) err = parse_mtd_partitions(info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(info->mtd, info->parts, err); - else if (err < 0 && pdata->parts) + else if (err <= 0 && pdata->parts) add_mtd_partitions(info->mtd, pdata->parts, pdata->nr_parts); else #endif diff --git a/drivers/mtd/onenand/generic.c b/drivers/mtd/onenand/generic.c index 3d44d04..ad81ab8 100644 --- a/drivers/mtd/onenand/generic.c +++ b/drivers/mtd/onenand/generic.c @@ -76,7 +76,7 @@ static int __devinit generic_onenand_probe(struct device *dev) err = parse_mtd_partitions(&info->mtd, part_probes, &info->parts, 0); if (err > 0) add_mtd_partitions(&info->mtd, info->parts, err); - else if (err < 0 && pdata->parts) + else if (err <= 0 && pdata->parts) add_mtd_partitions(&info->mtd, pdata->parts, pdata->nr_parts); else #endif -- cgit v0.10.2 From daf20d95bff81c6fc8a8d8160e620e1f9581af02 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 12 May 2008 11:21:58 -0300 Subject: V4L/DVB (7885): ivtv/cx18: add compat_ioctl entries Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 4ca9d84..dee6cc9 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -36,12 +36,13 @@ #define CX18_DSP0_INTERRUPT_MASK 0xd0004C static struct file_operations cx18_v4l2_enc_fops = { - .owner = THIS_MODULE, - .read = cx18_v4l2_read, - .open = cx18_v4l2_open, - .ioctl = cx18_v4l2_ioctl, - .release = cx18_v4l2_close, - .poll = cx18_v4l2_enc_poll, + .owner = THIS_MODULE, + .read = cx18_v4l2_read, + .open = cx18_v4l2_open, + .ioctl = cx18_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = cx18_v4l2_close, + .poll = cx18_v4l2_enc_poll, }; /* offset from 0 to register ts v4l2 minors on */ diff --git a/drivers/media/video/ivtv/ivtv-streams.c b/drivers/media/video/ivtv/ivtv-streams.c index c47c2b9..c854285 100644 --- a/drivers/media/video/ivtv/ivtv-streams.c +++ b/drivers/media/video/ivtv/ivtv-streams.c @@ -44,23 +44,25 @@ #include "ivtv-streams.h" static const struct file_operations ivtv_v4l2_enc_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_enc_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_enc_poll, }; static const struct file_operations ivtv_v4l2_dec_fops = { - .owner = THIS_MODULE, - .read = ivtv_v4l2_read, - .write = ivtv_v4l2_write, - .open = ivtv_v4l2_open, - .ioctl = ivtv_v4l2_ioctl, - .release = ivtv_v4l2_close, - .poll = ivtv_v4l2_dec_poll, + .owner = THIS_MODULE, + .read = ivtv_v4l2_read, + .write = ivtv_v4l2_write, + .open = ivtv_v4l2_open, + .ioctl = ivtv_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .release = ivtv_v4l2_close, + .poll = ivtv_v4l2_dec_poll, }; #define IVTV_V4L2_DEC_MPG_OFFSET 16 /* offset from 0 to register decoder mpg v4l2 minors on */ -- cgit v0.10.2 From 81b8021a71c194752e8bbb29328cecc744a47b2b Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Wed, 14 May 2008 23:14:04 -0300 Subject: V4L/DVB (7901): zoran: use correct type for CPU flags locking-add-typecheck-on-irqsave-and-friends-for-correct-flags.patch will cause drivers/media/video/zoran_driver.c: In function 'zoran_close_end_session': drivers/media/video/zoran_driver.c:1172: warning: comparison of distinct pointer types lacks a cast Signed-off-by: Andrew Morton Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index 345c77e..b75313d 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -1167,7 +1167,7 @@ zoran_close_end_session (struct file *file) /* v4l capture */ if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -3436,7 +3436,7 @@ zoran_do_ioctl (struct inode *inode, /* unload capture */ if (zr->v4l_memgrab_active) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); @@ -4375,7 +4375,7 @@ zoran_vm_close (struct vm_area_struct *vma) mutex_lock(&zr->resource_lock); if (fh->v4l_buffers.active != ZORAN_FREE) { - long flags; + unsigned long flags; spin_lock_irqsave(&zr->spinlock, flags); zr36057_set_memgrab(zr, 0); -- cgit v0.10.2 From 4277106b4fb6edd8f52b0653841faebbf7160480 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:51:07 -0300 Subject: V4L/DVB (7902): fix handling of tea5761_autodetection return value tea5761_autodetection returns -EINVAL on error Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tea5761.c b/drivers/media/common/tuners/tea5761.c index b93cdef..b23dade 100644 --- a/drivers/media/common/tuners/tea5761.c +++ b/drivers/media/common/tuners/tea5761.c @@ -295,7 +295,7 @@ struct dvb_frontend *tea5761_attach(struct dvb_frontend *fe, { struct tea5761_priv *priv = NULL; - if (tea5761_autodetection(i2c_adap, i2c_addr) == EINVAL) + if (tea5761_autodetection(i2c_adap, i2c_addr) != 0) return NULL; priv = kzalloc(sizeof(struct tea5761_priv), GFP_KERNEL); -- cgit v0.10.2 From 7fa7b8583f14889aaceebcd8dca3093987e289f7 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:53:39 -0300 Subject: V4L/DVB (7903): gp8psk_power_ctrl should return negative errors Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gp8psk.c b/drivers/media/dvb/dvb-usb/gp8psk.c index 9a942af..2653120 100644 --- a/drivers/media/dvb/dvb-usb/gp8psk.c +++ b/drivers/media/dvb/dvb-usb/gp8psk.c @@ -146,24 +146,24 @@ static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff) if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */ if(gp8psk_load_bcm4500fw(d)) - return EINVAL; + return -EINVAL; if (! (status & bmIntersilOn)) /* LNB Power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Set DVB mode to 1 */ if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM) if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0)) - return EINVAL; + return -EINVAL; /* Abort possible TS (if previous tune crashed) */ if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0)) - return EINVAL; + return -EINVAL; } else { /* Turn off LNB power */ if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1)) - return EINVAL; + return -EINVAL; /* Turn off 8psk power */ if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1)) return -EINVAL; -- cgit v0.10.2 From 4d3437df25325d517ee310d55989ce9630ff529e Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 26 May 2008 14:03:02 -0300 Subject: V4L/DVB (7904): v4l/tuner-core: consistent handling of return values change check_mode and set_mode to return negative errors and fix all callers Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index a0f7bc1..1a91174 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -536,7 +536,7 @@ static void set_addr(struct i2c_client *c, struct tuner_setup *tun_setup) static inline int check_mode(struct tuner *t, char *cmd) { if ((1 << t->mode & t->mode_mask) == 0) { - return EINVAL; + return -EINVAL; } switch (t->mode) { @@ -730,11 +730,11 @@ static inline int set_mode(struct i2c_client *client, struct tuner *t, int mode, t->mode = mode; - if (check_mode(t, cmd) == EINVAL) { + if (check_mode(t, cmd) == -EINVAL) { t->mode = T_STANDBY; if (analog_ops->standby) analog_ops->standby(&t->fe); - return EINVAL; + return -EINVAL; } return 0; } @@ -776,13 +776,13 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; case AUDC_SET_RADIO: if (set_mode(client, t, V4L2_TUNER_RADIO, "AUDC_SET_RADIO") - == EINVAL) + == -EINVAL) return 0; if (t->radio_freq) set_freq(client, t->radio_freq); break; case TUNER_SET_STANDBY: - if (check_mode(t, "TUNER_SET_STANDBY") == EINVAL) + if (check_mode(t, "TUNER_SET_STANDBY") == -EINVAL) return 0; t->mode = T_STANDBY; if (analog_ops->standby) @@ -790,7 +790,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) break; #ifdef CONFIG_VIDEO_ALLOW_V4L1 case VIDIOCSAUDIO: - if (check_mode(t, "VIDIOCSAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -813,7 +813,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_v4l2(t) == EINVAL) return 0; - if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==EINVAL) + if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) return 0; if (vc->norm < ARRAY_SIZE(map)) @@ -827,7 +827,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { unsigned long *v = arg; - if (check_mode(t, "VIDIOCSFREQ") == EINVAL) + if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -839,7 +839,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_tuner *vt = arg; - if (check_mode(t, "VIDIOCGTUNER") == EINVAL) + if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -883,7 +883,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct video_audio *va = arg; - if (check_mode(t, "VIDIOCGAUDIO") == EINVAL) + if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; if (check_v4l2(t) == EINVAL) return 0; @@ -925,7 +925,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) v4l2_std_id *id = arg; if (set_mode (client, t, V4L2_TUNER_ANALOG_TV, "VIDIOC_S_STD") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); @@ -941,7 +941,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) struct v4l2_frequency *f = arg; if (set_mode (client, t, f->type, "VIDIOC_S_FREQUENCY") - == EINVAL) + == -EINVAL) return 0; switch_v4l2(); set_freq(client,f->frequency); @@ -952,7 +952,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_frequency *f = arg; - if (check_mode(t, "VIDIOC_G_FREQUENCY") == EINVAL) + if (check_mode(t, "VIDIOC_G_FREQUENCY") == -EINVAL) return 0; switch_v4l2(); f->type = t->mode; @@ -973,7 +973,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_G_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_G_TUNER") == -EINVAL) return 0; switch_v4l2(); @@ -1020,7 +1020,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) { struct v4l2_tuner *tuner = arg; - if (check_mode(t, "VIDIOC_S_TUNER") == EINVAL) + if (check_mode(t, "VIDIOC_S_TUNER") == -EINVAL) return 0; switch_v4l2(); -- cgit v0.10.2 From 427aad6fda607914945022e916827037d2d0db3d Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 11 May 2008 19:58:59 -0300 Subject: V4L/DVB (7905): check_v4l2 should return -EINVAL on error check_v4l2 always returns 0, so this change is an noop for now, but a comment says it will return something else in the future Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/tuner-core.c b/drivers/media/video/tuner-core.c index 1a91174..0d12ace 100644 --- a/drivers/media/video/tuner-core.c +++ b/drivers/media/video/tuner-core.c @@ -792,7 +792,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) case VIDIOCSAUDIO: if (check_mode(t, "VIDIOCSAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; /* Should be implemented, since bttv calls it */ @@ -810,7 +810,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) }; struct video_channel *vc = arg; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (set_mode(client,t,V4L2_TUNER_ANALOG_TV, "VIDIOCSCHAN")==-EINVAL) @@ -829,7 +829,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCSFREQ") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; set_freq(client, *v); @@ -841,7 +841,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCGTUNER") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { @@ -885,7 +885,7 @@ static int tuner_command(struct i2c_client *client, unsigned int cmd, void *arg) if (check_mode(t, "VIDIOCGAUDIO") == -EINVAL) return 0; - if (check_v4l2(t) == EINVAL) + if (check_v4l2(t) == -EINVAL) return 0; if (V4L2_TUNER_RADIO == t->mode) { -- cgit v0.10.2 From 38db143e6feaa2dc649ed8bf69d1a12f7b9c0246 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 16 May 2008 00:15:53 -0300 Subject: V4L/DVB (7906): tuners/mxl5005s.c: don't define variables for enums It doesn't seem to be intended that "tuner_modu_type" and "MXL5005_ControlName" were global variables. Signed-off-by: Adrian Bunk Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/mxl5005s.c b/drivers/media/common/tuners/mxl5005s.c index 5d05b53..0dc2bef 100644 --- a/drivers/media/common/tuners/mxl5005s.c +++ b/drivers/media/common/tuners/mxl5005s.c @@ -101,7 +101,7 @@ enum { MXL_QAM, MXL_ANALOG_CABLE, MXL_ANALOG_OTA -} tuner_modu_type; +}; /* MXL5005 Tuner Register Struct */ struct TunerReg { @@ -194,7 +194,7 @@ enum { RFSYN_DIVM, /* 88 */ DN_BYPASS_AGC_I2C /* 89 */ #endif -} MXL5005_ControlName; +}; /* * The following context is source code provided by MaxLinear. -- cgit v0.10.2 From 45033bcf172d9965210b644f3769c9de94c33333 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 26 May 2008 14:23:49 -0300 Subject: V4L/DVB (7908): always enter drivers/media/video/ After commit 039d40019f3c5e26ea50ec5af4270189f63365e1 (V4L/DVB (7898): Fix VIDEO_MEDIA Kconfig logic) VIDEO_MEDIA is no longer usable in Makefile's for deciding which directories we enter, resulting in compile errors like the following with CONFIG_VIDEO_DEV=y, CONFIG_DVB_CORE=m: <-- snip --> ... MODPOST 187 modules ... make[2]: *** [__modpost] Error 1 <-- snip --> The easiest solution is to always enter video/ Signed-off-by: Adrian Bunk Acked-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/Makefile b/drivers/media/Makefile index cc11c4c..09a829d 100644 --- a/drivers/media/Makefile +++ b/drivers/media/Makefile @@ -2,12 +2,7 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := common/ - -obj-$(CONFIG_VIDEO_MEDIA) += common/ - -# Since hybrid devices are here, should be compiled if DVB and/or V4L -obj-$(CONFIG_VIDEO_MEDIA) += video/ +obj-y += common/ video/ obj-$(CONFIG_VIDEO_DEV) += radio/ obj-$(CONFIG_DVB_CORE) += dvb/ -- cgit v0.10.2 From b4aba24186d66190b21ab64bf28f22ffc51a9c43 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 20 May 2008 08:02:33 -0300 Subject: V4L/DVB (7910): usb: input layer dependency fixes testing of the -tip tree found the following build failures on 2.6.26-rc3: drivers/built-in.o: In function `ttusb_dec_disconnect': ttusb_dec.c:(.text+0xa2c95): undefined reference to `input_unregister_device' drivers/built-in.o: In function `dvb_usb_read_remote_control': dvb-usb-remote.c:(.text+0xa6a94): undefined reference to `input_event' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_03_48_57_CEST_2008.bad these are due to the media/dvb/usb layer having dependencies on INPUT functionality, without having that spelled out in the Kconfig file. this patch makes that dependency explicit (for the drivers affected), which solves the build error. Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index cf4584e..f00a0eb 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -1,6 +1,6 @@ config DVB_USB tristate "Support for various USB DVB devices" - depends on DVB_CORE && USB && I2C + depends on DVB_CORE && USB && I2C && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER help diff --git a/drivers/media/dvb/ttusb-dec/Kconfig b/drivers/media/dvb/ttusb-dec/Kconfig index 0712899..a23cc0a 100644 --- a/drivers/media/dvb/ttusb-dec/Kconfig +++ b/drivers/media/dvb/ttusb-dec/Kconfig @@ -1,6 +1,6 @@ config DVB_TTUSB_DEC tristate "Technotrend/Hauppauge USB DEC devices" - depends on DVB_CORE && USB + depends on DVB_CORE && USB && INPUT depends on HOTPLUG # due to FW_LOADER select FW_LOADER select CRC32 -- cgit v0.10.2 From 70345fbe4a76621808219c506f2480b39131e575 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 22 May 2008 19:30:40 -0300 Subject: V4L/DVB (7911): Remove v4l2_video_std_fps prototype declaration The v4l2_video_std_fps function has been removed by Adrian Bunk in 2004 but then its prototype re-appeared in include/media/v4l2-dev.h. Remove it. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index a807d2f..33f01ae 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -40,7 +40,6 @@ #define VFL_TYPE_VTX 3 /* Video standard functions */ -extern unsigned int v4l2_video_std_fps(struct v4l2_standard *vs); extern char *v4l2_norm_to_name(v4l2_std_id id); extern int v4l2_video_std_construct(struct v4l2_standard *vs, int id, char *name); -- cgit v0.10.2 From 2f1a1c7f9c10a87a6725e4b9603e4880c2059d71 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 25 May 2008 13:09:51 -0300 Subject: V4L/DVB (7916): dib7000p: fix dib7000p_attach when !CONFIG_DVB_DIB7000P somebody forgot to to fix this header... Thanks to Ingo Molnar for pointing this out. Tested-by: Ingo Molnar Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/dib7000p.h b/drivers/media/dvb/frontends/dib7000p.h index 081bd81..07c4d12 100644 --- a/drivers/media/dvb/frontends/dib7000p.h +++ b/drivers/media/dvb/frontends/dib7000p.h @@ -37,7 +37,20 @@ struct dib7000p_config { #define DEFAULT_DIB7000P_I2C_ADDRESS 18 -extern struct dvb_frontend * dib7000p_attach(struct i2c_adapter *i2c_adap, u8 i2c_addr, struct dib7000p_config *cfg); +#if defined(CONFIG_DVB_DIB7000P) || (defined(CONFIG_DVB_DIB7000P_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg); +#else +static inline struct dvb_frontend *dib7000p_attach(struct i2c_adapter *i2c_adap, + u8 i2c_addr, + struct dib7000p_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern int dib7000p_i2c_enumeration(struct i2c_adapter *i2c, int no_of_demods, u8 default_addr, struct dib7000p_config cfg[]); extern struct i2c_adapter * dib7000p_get_i2c_master(struct dvb_frontend *, enum dibx000_i2c_interface, int); -- cgit v0.10.2 From 383a211699026ee41d9726e3f5edcfa1b0071b8f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 24 May 2008 23:48:16 -0300 Subject: V4L/DVB (7918): au0828: remove irrelevent analog tuner standby code This code is irrelevant to this driver and should be removed. This was copied from a hack in cx88-dvb.c, which prevents noise coming from the analog tuner (via an audio patch cable from the pci card to the sound hardware) when in digital mode by muting the tda988x. This issue does not apply to this USB hybrid chip design, where a single piece of silicon handles both analog and digital demodulation. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/au0828/au0828-dvb.c b/drivers/media/video/au0828/au0828-dvb.c index c86a5f1..c6d4705 100644 --- a/drivers/media/video/au0828/au0828-dvb.c +++ b/drivers/media/video/au0828/au0828-dvb.c @@ -353,12 +353,6 @@ int au0828_dvb_register(struct au0828_dev *dev) return -1; } - /* Put the analog decoder in standby to keep it quiet */ - au0828_call_i2c_clients(dev, TUNER_SET_STANDBY, NULL); - - if (dvb->frontend->ops.analog_ops.standby) - dvb->frontend->ops.analog_ops.standby(dvb->frontend); - /* register everything */ ret = dvb_register(dev); if (ret < 0) { -- cgit v0.10.2 From 5cf3f5cd1f6ee0d81b75c659c732dd8dd245a350 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 24 May 2008 23:49:03 -0300 Subject: V4L/DVB (7919): VIDEO_AU0828 does not depend on VIDEO_DEV Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/au0828/Kconfig b/drivers/media/video/au0828/Kconfig index def10d0..52b2491 100644 --- a/drivers/media/video/au0828/Kconfig +++ b/drivers/media/video/au0828/Kconfig @@ -1,7 +1,7 @@ config VIDEO_AU0828 tristate "Auvitek AU0828 support" - depends on VIDEO_DEV && I2C && INPUT && DVB_CORE && USB + depends on I2C && INPUT && DVB_CORE && USB select I2C_ALGOBIT select VIDEO_TVEEPROM select DVB_AU8522 if !DVB_FE_CUSTOMIZE -- cgit v0.10.2 From 3b4a9714f43a1d675a4352260a12daae197f37c3 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Mon, 26 May 2008 01:31:17 -0300 Subject: V4L/DVB (7922): tuner-simple: fix tuner_warn() induced kernel oops in simple_tuner_attach() The tuner_warn() macro relies on the local variable "priv" to be a valid pointer. There was a case in simple_tuner_attach() where this cannot be the case yet, so tuner_warn() would dereference a NULL "priv" pointer. Changed the tuner_warn() to a printk() with the originally intended output format. Signed-off-by: Andy Walls Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tuner-simple.c b/drivers/media/common/tuners/tuner-simple.c index be8d903..266c255 100644 --- a/drivers/media/common/tuners/tuner-simple.c +++ b/drivers/media/common/tuners/tuner-simple.c @@ -1018,8 +1018,10 @@ struct dvb_frontend *simple_tuner_attach(struct dvb_frontend *fe, fe->ops.i2c_gate_ctrl(fe, 1); if (1 != i2c_transfer(i2c_adap, &msg, 1)) - tuner_warn("unable to probe %s, proceeding anyway.", - tuners[type].name); + printk(KERN_WARNING "tuner-simple %d-%04x: " + "unable to probe %s, proceeding anyway.", + i2c_adapter_id(i2c_adap), i2c_addr, + tuners[type].name); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); -- cgit v0.10.2 From 7f3917f6484938d56cb5ab660f476c1dfa445a81 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Mon, 19 May 2008 22:13:02 -0300 Subject: V4L/DVB (7925): cx18: ensure that the xceive pin is always asserted on init. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index bb8bc86..1e0d32b 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -62,12 +62,14 @@ void cx18_gpio_init(struct cx18 *cx) gpio_dir = cx->card->gpio_init.direction; gpio_val = cx->card->gpio_init.initial_value; + if (cx->card->xceive_pin) { + gpio_dir |= 1 << cx->card->xceive_pin; + gpio_val |= 1 << cx->card->xceive_pin; + } + if (gpio_dir == 0) return; - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val |= 1 << cx->card->xceive_pin; - CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", read_reg(CX18_REG_GPIO_DIR1), read_reg(CX18_REG_GPIO_DIR2), read_reg(CX18_REG_GPIO_OUT1), read_reg(CX18_REG_GPIO_OUT2)); -- cgit v0.10.2 From 63b8c709895febf62766dc8e818a1457a520fb15 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Wed, 21 May 2008 17:40:19 -0300 Subject: V4L/DVB (7928): cx18: fix audio registers 808 and 80c The handling of the audio registers 808 and 80c were based on old datasheets. Updated to the latest information. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 6686490..9a26751 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -182,14 +182,16 @@ static void input_change(struct cx18 *cx) if (std == V4L2_STD_NTSC_M_JP) { /* Japan uses EIAJ audio standard */ cx18_av_write(cx, 0x808, 0xf7); + cx18_av_write(cx, 0x80b, 0x02); } else if (std == V4L2_STD_NTSC_M_KR) { /* South Korea uses A2 audio standard */ cx18_av_write(cx, 0x808, 0xf8); + cx18_av_write(cx, 0x80b, 0x03); } else { /* Others use the BTSC audio standard */ cx18_av_write(cx, 0x808, 0xf6); + cx18_av_write(cx, 0x80b, 0x01); } - cx18_av_write(cx, 0x80b, 0x00); } else if (std & V4L2_STD_PAL) { /* Follow tuner change procedure for PAL */ cx18_av_write(cx, 0x808, 0xff); @@ -741,8 +743,8 @@ static void log_audio_status(struct cx18 *cx) { struct cx18_av_state *state = &cx->av_state; u8 download_ctl = cx18_av_read(cx, 0x803); - u8 mod_det_stat0 = cx18_av_read(cx, 0x805); - u8 mod_det_stat1 = cx18_av_read(cx, 0x804); + u8 mod_det_stat0 = cx18_av_read(cx, 0x804); + u8 mod_det_stat1 = cx18_av_read(cx, 0x805); u8 audio_config = cx18_av_read(cx, 0x808); u8 pref_mode = cx18_av_read(cx, 0x809); u8 afc0 = cx18_av_read(cx, 0x80b); @@ -760,12 +762,12 @@ static void log_audio_status(struct cx18 *cx) case 0x12: p = "dual with SAP"; break; case 0x14: p = "tri with SAP"; break; case 0xfe: p = "forced mode"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio mode: %s\n", p); switch (mod_det_stat1) { - case 0x00: p = "BTSC"; break; + case 0x00: p = "not defined"; break; case 0x01: p = "EIAJ"; break; case 0x02: p = "A2-M"; break; case 0x03: p = "A2-BG"; break; @@ -779,8 +781,13 @@ static void log_audio_status(struct cx18 *cx) case 0x0b: p = "NICAM-I"; break; case 0x0c: p = "NICAM-L"; break; case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; + case 0x0e: p = "IF FM Radio"; break; + case 0x0f: p = "BTSC"; break; + case 0x10: p = "detected chrominance"; break; + case 0xfd: p = "unknown audio standard"; break; + case 0xfe: p = "forced audio standard"; break; case 0xff: p = "no detected audio standard"; break; - default: p = "not defined"; + default: p = "not defined"; break; } CX18_INFO("Detected audio standard: %s\n", p); CX18_INFO("Audio muted: %s\n", @@ -789,22 +796,23 @@ static void log_audio_status(struct cx18 *cx) (download_ctl & 0x10) ? "running" : "stopped"); switch (audio_config >> 4) { - case 0x00: p = "BTSC"; break; - case 0x01: p = "EIAJ"; break; - case 0x02: p = "A2-M"; break; - case 0x03: p = "A2-BG"; break; - case 0x04: p = "A2-DK1"; break; - case 0x05: p = "A2-DK2"; break; - case 0x06: p = "A2-DK3"; break; - case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; - case 0x08: p = "AM-L"; break; - case 0x09: p = "NICAM-BG"; break; - case 0x0a: p = "NICAM-DK"; break; - case 0x0b: p = "NICAM-I"; break; - case 0x0c: p = "NICAM-L"; break; - case 0x0d: p = "FM radio"; break; + case 0x00: p = "undefined"; break; + case 0x01: p = "BTSC"; break; + case 0x02: p = "EIAJ"; break; + case 0x03: p = "A2-M"; break; + case 0x04: p = "A2-BG"; break; + case 0x05: p = "A2-DK1"; break; + case 0x06: p = "A2-DK2"; break; + case 0x07: p = "A2-DK3"; break; + case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; + case 0x09: p = "AM-L"; break; + case 0x0a: p = "NICAM-BG"; break; + case 0x0b: p = "NICAM-DK"; break; + case 0x0c: p = "NICAM-I"; break; + case 0x0d: p = "NICAM-L"; break; + case 0x0e: p = "FM radio"; break; case 0x0f: p = "automatic detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio standard: %s\n", p); @@ -815,12 +823,9 @@ static void log_audio_status(struct cx18 *cx) case 0x02: p = "MONO3 (STEREO forced MONO)"; break; case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; case 0x04: p = "STEREO"; break; - case 0x05: p = "DUAL1 (AB)"; break; - case 0x06: p = "DUAL2 (AC) (FM)"; break; - case 0x07: p = "DUAL3 (BC) (FM)"; break; - case 0x08: p = "DUAL4 (AC) (AM)"; break; - case 0x09: p = "DUAL5 (BC) (AM)"; break; - case 0x0a: p = "SAP"; break; + case 0x05: p = "DUAL1 (AC)"; break; + case 0x06: p = "DUAL2 (BC)"; break; + case 0x07: p = "DUAL3 (AB)"; break; default: p = "undefined"; } CX18_INFO("Configured audio mode: %s\n", p); @@ -835,9 +840,11 @@ static void log_audio_status(struct cx18 *cx) case 0x06: p = "BTSC"; break; case 0x07: p = "EIAJ"; break; case 0x08: p = "A2-M"; break; - case 0x09: p = "FM Radio"; break; + case 0x09: p = "FM Radio (4.5 MHz)"; break; + case 0x0a: p = "FM Radio (5.5 MHz)"; break; + case 0x0b: p = "S-Video"; break; case 0x0f: p = "automatic standard and mode detection"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Configured audio system: %s\n", p); } @@ -857,22 +864,24 @@ static void log_audio_status(struct cx18 *cx) case 5: p = "language AC"; break; case 6: p = "language BC"; break; case 7: p = "language AB"; break; - default: p = "undefined"; + default: p = "undefined"; break; } CX18_INFO("Preferred audio mode: %s\n", p); if ((audio_config & 0xf) == 0xf) { - switch ((afc0 >> 2) & 0x1) { + switch ((afc0 >> 3) & 0x1) { case 0: p = "system DK"; break; case 1: p = "system L"; break; } CX18_INFO("Selected 65 MHz format: %s\n", p); - switch (afc0 & 0x3) { - case 0: p = "BTSC"; break; - case 1: p = "EIAJ"; break; - case 2: p = "A2-M"; break; - default: p = "undefined"; + switch (afc0 & 0x7) { + case 0: p = "Chroma"; break; + case 1: p = "BTSC"; break; + case 2: p = "EIAJ"; break; + case 3: p = "A2-M"; break; + case 4: p = "autodetect"; break; + default: p = "undefined"; break; } CX18_INFO("Selected 45 MHz format: %s\n", p); } -- cgit v0.10.2 From be303e16dbd210077c697aaf2f0960413166b53d Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 24 May 2008 12:43:43 -0300 Subject: V4L/DVB (7930): ivtv: bump version to 1.3.0. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-version.h b/drivers/media/video/ivtv/ivtv-version.h index 02c5ab0..442f43f 100644 --- a/drivers/media/video/ivtv/ivtv-version.h +++ b/drivers/media/video/ivtv/ivtv-version.h @@ -22,8 +22,8 @@ #define IVTV_DRIVER_NAME "ivtv" #define IVTV_DRIVER_VERSION_MAJOR 1 -#define IVTV_DRIVER_VERSION_MINOR 2 -#define IVTV_DRIVER_VERSION_PATCHLEVEL 1 +#define IVTV_DRIVER_VERSION_MINOR 3 +#define IVTV_DRIVER_VERSION_PATCHLEVEL 0 #define IVTV_VERSION __stringify(IVTV_DRIVER_VERSION_MAJOR) "." __stringify(IVTV_DRIVER_VERSION_MINOR) "." __stringify(IVTV_DRIVER_VERSION_PATCHLEVEL) #define IVTV_DRIVER_VERSION KERNEL_VERSION(IVTV_DRIVER_VERSION_MAJOR,IVTV_DRIVER_VERSION_MINOR,IVTV_DRIVER_VERSION_PATCHLEVEL) -- cgit v0.10.2 From 31554ae599a8ff6854bf8ecbedc1946c64854388 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 11:21:27 -0300 Subject: V4L/DVB (7931): cx18: allow for simultaneous digital and analog capture The HVR-1600 can do both analog and digital capture at the same time. Due to a driver bug -EBUSY would be returned when attempting to setup an analog capture while a digital capture was already in progress. Separate the two internally. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-controls.c b/drivers/media/video/cx18/cx18-controls.c index 2bdac5e..87cf410 100644 --- a/drivers/media/video/cx18/cx18-controls.c +++ b/drivers/media/video/cx18/cx18-controls.c @@ -159,7 +159,7 @@ static int cx18_setup_vbi_fmt(struct cx18 *cx, enum v4l2_mpeg_stream_vbi_fmt fmt { if (!(cx->v4l2_cap & V4L2_CAP_SLICED_VBI_CAPTURE)) return -EINVAL; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; /* First try to allocate sliced VBI buffers if needed. */ @@ -235,7 +235,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_S_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) { struct cx2341x_mpeg_params p = cx->params; - int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->capturing), arg, cmd); + int err = cx2341x_ext_ctrls(&p, atomic_read(&cx->ana_capturing), arg, cmd); if (err) return err; @@ -295,7 +295,7 @@ int cx18_control_ioctls(struct cx18 *cx, unsigned int cmd, void *arg) CX18_DEBUG_IOCTL("VIDIOC_TRY_EXT_CTRLS\n"); if (c->ctrl_class == V4L2_CTRL_CLASS_MPEG) return cx2341x_ext_ctrls(&cx->params, - atomic_read(&cx->capturing), arg, cmd); + atomic_read(&cx->ana_capturing), arg, cmd); return -EINVAL; } diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 0dd4e05..472f88e 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -889,7 +889,7 @@ static void cx18_remove(struct pci_dev *pci_dev) /* Stop all captures */ CX18_DEBUG_INFO("Stopping all streams\n"); - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) cx18_stop_all_captures(cx); /* Interrupts */ diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index a2a6c58..9c6a534 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -380,7 +380,8 @@ struct cx18 { int stream_buf_size[CX18_MAX_STREAMS]; /* Stream buffer size */ struct cx18_stream streams[CX18_MAX_STREAMS]; /* Stream data */ unsigned long i_flags; /* global cx18 flags */ - atomic_t capturing; /* count number of active capture streams */ + atomic_t ana_capturing; /* count number of active analog capture streams */ + atomic_t tot_capturing; /* total count number of active capture streams */ spinlock_t lock; /* lock access to this struct */ int search_pack_header; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index 0b3141d..d0d7888 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -318,7 +318,7 @@ static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, size_t tot_written = 0; int single_frame = 0; - if (atomic_read(&cx->capturing) == 0 && s->id == -1) { + if (atomic_read(&cx->ana_capturing) == 0 && s->id == -1) { /* shouldn't happen */ CX18_DEBUG_WARN("Stream %s not initialized before read\n", s->name); @@ -581,7 +581,7 @@ int cx18_v4l2_close(struct inode *inode, struct file *filp) cx18_call_i2c_clients(cx, VIDIOC_S_STD, &cx->std); /* Select correct audio input (i.e. TV tuner or Line in) */ cx18_audio_set_io(cx); - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* Undo video mute */ cx18_vapi(cx, CX18_CPU_SET_VIDEO_MUTE, 2, s->handle, cx->params.video_mute | @@ -627,7 +627,7 @@ static int cx18_serialized_open(struct cx18_stream *s, struct file *filp) } if (!test_bit(CX18_F_I_RADIO_USER, &cx->i_flags)) { - if (atomic_read(&cx->capturing) > 0) { + if (atomic_read(&cx->ana_capturing) > 0) { /* switching to radio while capture is in progress is not polite */ cx18_release_stream(s); @@ -694,7 +694,7 @@ int cx18_v4l2_open(struct inode *inode, struct file *filp) void cx18_mute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) + if (atomic_read(&cx->ana_capturing)) cx18_vapi(cx, CX18_CPU_SET_AUDIO_MUTE, 2, cx18_find_handle(cx), 1); CX18_DEBUG_INFO("Mute\n"); @@ -702,7 +702,7 @@ void cx18_mute(struct cx18 *cx) void cx18_unmute(struct cx18 *cx) { - if (atomic_read(&cx->capturing)) { + if (atomic_read(&cx->ana_capturing)) { cx18_msleep_timeout(100, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 2, cx18_find_handle(cx), 12); diff --git a/drivers/media/video/cx18/cx18-ioctl.c b/drivers/media/video/cx18/cx18-ioctl.c index dbdcb86..4151f1e 100644 --- a/drivers/media/video/cx18/cx18-ioctl.c +++ b/drivers/media/video/cx18/cx18-ioctl.c @@ -247,7 +247,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (!set_fmt || (cx->params.width == w && cx->params.height == h)) return 0; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->ana_capturing) > 0) return -EBUSY; cx->params.width = w; @@ -264,7 +264,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, if (fmt->type == V4L2_BUF_TYPE_VBI_CAPTURE) { if (set_fmt && streamtype == CX18_ENC_STREAM_TYPE_VBI && cx->vbi.sliced_in->service_set && - atomic_read(&cx->capturing) > 0) + atomic_read(&cx->ana_capturing) > 0) return -EBUSY; if (set_fmt) { cx->vbi.sliced_in->service_set = 0; @@ -293,7 +293,7 @@ static int cx18_try_or_set_fmt(struct cx18 *cx, int streamtype, return 0; if (set == 0) return -EINVAL; - if (atomic_read(&cx->capturing) > 0 && cx->vbi.sliced_in->service_set == 0) + if (atomic_read(&cx->ana_capturing) > 0 && cx->vbi.sliced_in->service_set == 0) return -EBUSY; cx18_av_cmd(cx, VIDIOC_S_FMT, fmt); memcpy(cx->vbi.sliced_in, vbifmt, sizeof(*cx->vbi.sliced_in)); @@ -581,7 +581,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg break; if (test_bit(CX18_F_I_RADIO_USER, &cx->i_flags) || - atomic_read(&cx->capturing) > 0) { + atomic_read(&cx->ana_capturing) > 0) { /* Switching standard would turn off the radio or mess with already running streams, prevent that by returning EBUSY. */ @@ -677,7 +677,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (test_and_set_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; @@ -689,7 +689,7 @@ int cx18_v4l2_ioctls(struct cx18 *cx, struct file *filp, unsigned cmd, void *arg enc->flags = 0; if (try) return 0; - if (!atomic_read(&cx->capturing)) + if (!atomic_read(&cx->ana_capturing)) return -EPERM; if (!test_and_clear_bit(CX18_F_I_ENC_PAUSED, &cx->i_flags)) return 0; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index dee6cc9..5a06586 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -444,7 +444,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) s->handle = data[0]; cx18_vapi(cx, CX18_CPU_SET_CHANNEL_TYPE, 2, s->handle, captype); - if (atomic_read(&cx->capturing) == 0 && !ts) { + if (atomic_read(&cx->ana_capturing) == 0 && !ts) { /* Stuff from Windows, we don't know what it is */ cx18_vapi(cx, CX18_CPU_SET_VER_CROP_LINE, 2, s->handle, 0); cx18_vapi(cx, CX18_CPU_SET_MISC_PARAMETERS, 3, s->handle, 3, 1); @@ -467,7 +467,7 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) cx2341x_update(cx, cx18_api_func, NULL, &cx->params); } - if (atomic_read(&cx->capturing) == 0) { + if (atomic_read(&cx->tot_capturing) == 0) { clear_bit(CX18_F_I_EOS, &cx->i_flags); write_reg(7, CX18_DSP0_INTERRUPT_MASK); } @@ -493,7 +493,9 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } /* you're live! sit back and await interrupts :) */ - atomic_inc(&cx->capturing); + if (!ts) + atomic_inc(&cx->ana_capturing); + atomic_inc(&cx->tot_capturing); return 0; } @@ -524,7 +526,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_DEBUG_INFO("Stop Capture\n"); - if (atomic_read(&cx->capturing) == 0) + if (atomic_read(&cx->tot_capturing) == 0) return 0; if (s->type == CX18_ENC_STREAM_TYPE_MPG) @@ -538,7 +540,9 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) CX18_INFO("ignoring gop_end: not (yet?) supported by the firmware\n"); } - atomic_dec(&cx->capturing); + if (s->type != CX18_ENC_STREAM_TYPE_TS) + atomic_dec(&cx->ana_capturing); + atomic_dec(&cx->tot_capturing); /* Clear capture and no-read bits */ clear_bit(CX18_F_S_STREAMING, &s->s_flags); @@ -546,7 +550,7 @@ int cx18_stop_v4l2_encode_stream(struct cx18_stream *s, int gop_end) cx18_vapi(cx, CX18_DESTROY_TASK, 1, s->handle); s->handle = 0xffffffff; - if (atomic_read(&cx->capturing) > 0) + if (atomic_read(&cx->tot_capturing) > 0) return 0; write_reg(5, CX18_DSP0_INTERRUPT_MASK); -- cgit v0.10.2 From 8f9935732930e705cab1936a03418ce01aee979a Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 11:45:53 -0300 Subject: V4L/DVB (7932): cx18: mark Compro H900 as fully supported. I always assumed that the Compro H900 could do digital as well, but it turned out that it is an analog-only card. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/cx18.txt b/Documentation/video4linux/cx18.txt index 077d56e..6842c26 100644 --- a/Documentation/video4linux/cx18.txt +++ b/Documentation/video4linux/cx18.txt @@ -1,7 +1,9 @@ Some notes regarding the cx18 driver for the Conexant CX23418 MPEG encoder chip: -1) The only hardware currently supported is the Hauppauge HVR-1600. +1) The only hardware currently supported is the Hauppauge HVR-1600 + card and the Compro VideoMate H900 (note that this card only + supports analog input, it has no digital tuner!). 2) Some people have problems getting the i2c bus to work. Cause unknown. The symptom is that the eeprom cannot be read and the card is diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index 553adbf..baccd07 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -126,7 +126,7 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { /* ------------------------------------------------------------------------- */ -/* Compro VideoMate H900: not working at the moment! */ +/* Compro VideoMate H900: note that this card is analog only! */ static const struct cx18_card_pci_info cx18_pci_h900[] = { { PCI_DEVICE_ID_CX23418, CX18_PCI_ID_COMPRO, 0xe100 }, @@ -136,7 +136,7 @@ static const struct cx18_card_pci_info cx18_pci_h900[] = { static const struct cx18_card cx18_card_h900 = { .type = CX18_CARD_COMPRO_H900, .name = "Compro VideoMate H900", - .comment = "DVB & VBI are not yet supported\n", + .comment = "VBI is not yet supported\n", .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, -- cgit v0.10.2 From ba60bc673ce7d019ae6684cebbb33e5239346664 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 25 May 2008 14:34:36 -0300 Subject: V4L/DVB (7934): cx18: move gpio_dir/val statics to the cx18 struct. The gpio_dir/val statics cannot be global, they are card-specific. Thanks to Andy Walls for pointing this out. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index 9c6a534..b943aea 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -424,6 +424,10 @@ struct cx18 { struct mutex i2c_bus_lock[2]; struct i2c_client *i2c_clients[I2C_CLIENTS_MAX]; + /* gpio */ + u32 gpio_dir; + u32 gpio_val; + /* v4l2 and User settings */ /* codec settings */ diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 1e0d32b..2f324b8 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -35,9 +35,6 @@ #define CX18_REG_GPIO_OUT2 0xc78104 #define CX18_REG_GPIO_DIR2 0xc7810c -static u32 gpio_dir; -static u32 gpio_val; - /* * HVR-1600 GPIO pins, courtesy of Hauppauge: * @@ -49,25 +46,28 @@ static u32 gpio_val; static void gpio_write(struct cx18 *cx) { - write_reg((gpio_dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); - write_reg(((gpio_dir & 0xffff) << 16) | (gpio_val & 0xffff), + u32 dir = cx->gpio_dir; + u32 val = cx->gpio_val; + + write_reg((dir & 0xffff) << 16, CX18_REG_GPIO_DIR1); + write_reg(((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); - write_reg(gpio_dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg((gpio_dir & 0xffff0000) | ((gpio_val & 0xffff0000) >> 16), + write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); + write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } void cx18_gpio_init(struct cx18 *cx) { - gpio_dir = cx->card->gpio_init.direction; - gpio_val = cx->card->gpio_init.initial_value; + cx->gpio_dir = cx->card->gpio_init.direction; + cx->gpio_val = cx->card->gpio_init.initial_value; if (cx->card->xceive_pin) { - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val |= 1 << cx->card->xceive_pin; + cx->gpio_dir |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; } - if (gpio_dir == 0) + if (cx->gpio_dir == 0) return; CX18_DEBUG_INFO("GPIO initial dir: %08x/%08x out: %08x/%08x\n", @@ -88,13 +88,12 @@ int cx18_reset_tuner_gpio(void *dev, int cmd, int value) return 0; CX18_DEBUG_INFO("Resetting tuner\n"); - gpio_dir |= 1 << cx->card->xceive_pin; - gpio_val &= ~(1 << cx->card->xceive_pin); + cx->gpio_val &= ~(1 << cx->card->xceive_pin); gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); - gpio_val |= 1 << cx->card->xceive_pin; + cx->gpio_val |= 1 << cx->card->xceive_pin; gpio_write(cx); schedule_timeout_interruptible(msecs_to_jiffies(1)); return 0; -- cgit v0.10.2 From 9adea1c00df74823e1719ebbcb86c972c4c2aba1 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 18 Apr 2008 20:26:04 -0300 Subject: V4L/DVB (7943): tuner: add macro, hybrid_tuner_report_instance_count Create a macro to report the number of instances of the tuner driver currently in use. This will allow drivers to perform specific cleanups before destroying the last instance of a tuner. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tuner-i2c.h b/drivers/media/common/tuners/tuner-i2c.h index 3ad6c8e..cb1c714 100644 --- a/drivers/media/common/tuners/tuner-i2c.h +++ b/drivers/media/common/tuners/tuner-i2c.h @@ -170,4 +170,12 @@ __fail: \ __ret; \ }) +#define hybrid_tuner_report_instance_count(state) \ +({ \ + int __ret = 0; \ + if (state) \ + __ret = state->i2c_props.count; \ + __ret; \ +}) + #endif /* __TUNER_I2C_H__ */ -- cgit v0.10.2 From c663d03590a882f4834197bff278ca0aa2a95e2e Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 18 Apr 2008 21:22:50 -0300 Subject: V4L/DVB (7944): tuner-xc2028: use hybrid_tuner_request_state Use a standard method to manage multiple instances of a hybrid tuner. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tuner-xc2028.c b/drivers/media/common/tuners/tuner-xc2028.c index 9e9003c..0cbde17 100644 --- a/drivers/media/common/tuners/tuner-xc2028.c +++ b/drivers/media/common/tuners/tuner-xc2028.c @@ -46,7 +46,7 @@ module_param_string(firmware_name, firmware_name, sizeof(firmware_name), 0); MODULE_PARM_DESC(firmware_name, "Firmware file name. Allows overriding the " "default firmware name\n"); -static LIST_HEAD(xc2028_list); +static LIST_HEAD(hybrid_tuner_instance_list); static DEFINE_MUTEX(xc2028_list_mutex); /* struct for storing firmware table */ @@ -68,12 +68,11 @@ struct firmware_properties { }; struct xc2028_data { - struct list_head xc2028_list; + struct list_head hybrid_tuner_instance_list; struct tuner_i2c_props i2c_props; int (*tuner_callback) (void *dev, int command, int arg); void *video_dev; - int count; __u32 frequency; struct firmware_description *firm; @@ -1072,20 +1071,19 @@ static int xc2028_dvb_release(struct dvb_frontend *fe) mutex_lock(&xc2028_list_mutex); - priv->count--; - - if (!priv->count) { - list_del(&priv->xc2028_list); - + /* only perform final cleanup if this is the last instance */ + if (hybrid_tuner_report_instance_count(priv) == 1) { kfree(priv->ctrl.fname); - free_firmware(priv); - kfree(priv); - fe->tuner_priv = NULL; } + if (priv) + hybrid_tuner_release_state(priv); + mutex_unlock(&xc2028_list_mutex); + fe->tuner_priv = NULL; + return 0; } @@ -1150,7 +1148,7 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, struct xc2028_config *cfg) { struct xc2028_data *priv; - void *video_dev; + int instance; if (debug) printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n"); @@ -1163,48 +1161,40 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, return NULL; } - video_dev = cfg->i2c_adap->algo_data; - - if (debug) - printk(KERN_DEBUG "xc2028: video_dev =%p\n", video_dev); - mutex_lock(&xc2028_list_mutex); - list_for_each_entry(priv, &xc2028_list, xc2028_list) { - if (&priv->i2c_props.adap->dev == &cfg->i2c_adap->dev) { - video_dev = NULL; - if (debug) - printk(KERN_DEBUG "xc2028: reusing device\n"); - - break; - } - } - - if (video_dev) { - priv = kzalloc(sizeof(*priv), GFP_KERNEL); - if (priv == NULL) { - mutex_unlock(&xc2028_list_mutex); - return NULL; - } - - priv->i2c_props.addr = cfg->i2c_addr; - priv->i2c_props.adap = cfg->i2c_adap; - priv->i2c_props.name = "xc2028"; - - priv->video_dev = video_dev; + instance = hybrid_tuner_request_state(struct xc2028_data, priv, + hybrid_tuner_instance_list, + cfg->i2c_adap, cfg->i2c_addr, + "xc2028"); + switch (instance) { + case 0: + /* memory allocation failure */ + goto fail; + break; + case 1: + /* new tuner instance */ priv->tuner_callback = cfg->callback; priv->ctrl.max_len = 13; mutex_init(&priv->lock); - list_add_tail(&priv->xc2028_list, &xc2028_list); - } - - fe->tuner_priv = priv; - priv->count++; + /* analog side (tuner-core) uses i2c_adap->algo_data. + * digital side is not guaranteed to have algo_data defined. + * + * digital side will always have fe->dvb defined. + * analog side (tuner-core) doesn't (yet) define fe->dvb. + */ + priv->video_dev = ((fe->dvb) && (fe->dvb->priv)) ? + fe->dvb->priv : cfg->i2c_adap->algo_data; - if (debug) - printk(KERN_DEBUG "xc2028: usage count is %i\n", priv->count); + fe->tuner_priv = priv; + break; + case 2: + /* existing tuner instance */ + fe->tuner_priv = priv; + break; + } memcpy(&fe->ops.tuner_ops, &xc2028_dvb_tuner_ops, sizeof(xc2028_dvb_tuner_ops)); @@ -1217,6 +1207,11 @@ struct dvb_frontend *xc2028_attach(struct dvb_frontend *fe, mutex_unlock(&xc2028_list_mutex); return fe; +fail: + mutex_unlock(&xc2028_list_mutex); + + xc2028_dvb_release(fe); + return NULL; } EXPORT_SYMBOL(xc2028_attach); -- cgit v0.10.2 From 39028ec69b13712ec1dcd9aa14844bf60f19cb20 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 2 Jun 2008 15:46:51 -0300 Subject: V4L/DVB (7166): [v4l] Add new user class controls and deprecate others These were removed in commit 26d507fcfef7f7d0cd2eec874a87169cc121c835: > -#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) > -#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) > -#define V4L2_CID_LASTP1 (V4L2_CID_BASE+24) /* > last CID + 1 */ > + > +/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ > +#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22) > +#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23) But there was no warning in Documentation/feature-removal-schedule.txt and I'm receiving reports that it's breaking userspace apps (the gstreamer-v4l2 plugin breaks in Fedora rawhide). You can't just pull things from the published userspace API like that. Please can we revert the addition of _DEPRECATED to these ioctl definitions. Perhaps we can add a runtime warning if they actually get used? Or a compile-time warning if we can manage that? Signed-off-by: David Woodhouse Signed-off-by: Mauro Carvalho Chehab diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index c141118..4a535ea 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -865,9 +865,9 @@ struct v4l2_querymenu #define V4L2_CID_HFLIP (V4L2_CID_BASE+20) #define V4L2_CID_VFLIP (V4L2_CID_BASE+21) -/* Deprecated, use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ -#define V4L2_CID_HCENTER_DEPRECATED (V4L2_CID_BASE+22) -#define V4L2_CID_VCENTER_DEPRECATED (V4L2_CID_BASE+23) +/* Deprecated; use V4L2_CID_PAN_RESET and V4L2_CID_TILT_RESET */ +#define V4L2_CID_HCENTER (V4L2_CID_BASE+22) +#define V4L2_CID_VCENTER (V4L2_CID_BASE+23) #define V4L2_CID_POWER_LINE_FREQUENCY (V4L2_CID_BASE+24) enum v4l2_power_line_frequency { -- cgit v0.10.2 From f34ec12a17984d7df784bf49caf64f5f743e5e10 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:31 -0300 Subject: V4L/DVB (7956): cinergyT2: endianness annotations, endianness and race fixes Endianness annotations and fixes + fixing the handling of ->uncorrected_block_count Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index f5010e8..a824f37 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -82,22 +82,22 @@ enum cinergyt2_ep1_cmd { struct dvbt_set_parameters_msg { uint8_t cmd; - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; } __attribute__((packed)); struct dvbt_get_status_msg { - uint32_t freq; + __le32 freq; uint8_t bandwidth; - uint16_t tps; + __le16 tps; uint8_t flags; - uint16_t gain; + __le16 gain; uint8_t snr; - uint32_t viterbi_error_rate; - uint32_t rs_error_rate; - uint32_t uncorrected_block_count; + __le32 viterbi_error_rate; + __le32 rs_error_rate; + __le32 uncorrected_block_count; uint8_t lock_bits; uint8_t prev_lock_bits; } __attribute__((packed)); @@ -136,6 +136,7 @@ struct cinergyt2 { wait_queue_head_t poll_wq; int pending_fe_events; int disconnect_pending; + unsigned int uncorrected_block_count; atomic_t inuse; void *streambuf; @@ -147,7 +148,7 @@ struct cinergyt2 { char phys[64]; struct delayed_work rc_query_work; int rc_input_event; - u32 rc_last_code; + __le32 rc_last_code; unsigned long last_event_jiffies; #endif }; @@ -160,7 +161,7 @@ enum { struct cinergyt2_rc_event { char type; - uint32_t value; + __le32 value; } __attribute__((packed)); static const uint32_t rc_keys[] = { @@ -619,8 +620,11 @@ static int cinergyt2_ioctl (struct inode *inode, struct file *file, { uint32_t unc_count; - unc_count = stat->uncorrected_block_count; - stat->uncorrected_block_count = 0; + if (mutex_lock_interruptible(&cinergyt2->sem)) + return -ERESTARTSYS; + unc_count = cinergyt2->uncorrected_block_count; + cinergyt2->uncorrected_block_count = 0; + mutex_unlock(&cinergyt2->sem); /* UNC are already converted to host byte order... */ return put_user(unc_count,(__u32 __user *) arg); @@ -769,7 +773,7 @@ static void cinergyt2_query_rc (struct work_struct *work) input_sync(cinergyt2->rc_input_dev); cinergyt2->rc_input_event = KEY_MAX; } - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); } goto out; } @@ -780,7 +784,7 @@ static void cinergyt2_query_rc (struct work_struct *work) n, le32_to_cpu(rc_events[n].value), rc_events[n].type); if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && - rc_events[n].value == ~0) { + rc_events[n].value == cpu_to_le32(~0)) { /* keyrepeat bit -> just repeat last rc_input_event */ } else { cinergyt2->rc_input_event = KEY_MAX; @@ -795,7 +799,7 @@ static void cinergyt2_query_rc (struct work_struct *work) if (cinergyt2->rc_input_event != KEY_MAX) { if (rc_events[n].value == cinergyt2->rc_last_code && - cinergyt2->rc_last_code != ~0) { + cinergyt2->rc_last_code != cpu_to_le32(~0)) { /* emit a key-up so the double event is recognized */ dprintk(1, "rc_input_event=%d UP\n", cinergyt2->rc_input_event); input_report_key(cinergyt2->rc_input_dev, @@ -829,7 +833,7 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) usb_make_path(cinergyt2->udev, cinergyt2->phys, sizeof(cinergyt2->phys)); strlcat(cinergyt2->phys, "/input0", sizeof(cinergyt2->phys)); cinergyt2->rc_input_event = KEY_MAX; - cinergyt2->rc_last_code = ~0; + cinergyt2->rc_last_code = cpu_to_le32(~0); INIT_DELAYED_WORK(&cinergyt2->rc_query_work, cinergyt2_query_rc); input_dev->name = DRIVER_NAME " remote control"; @@ -840,8 +844,8 @@ static int cinergyt2_register_rc(struct cinergyt2 *cinergyt2) input_dev->keycodesize = 0; input_dev->keycodemax = 0; input_dev->id.bustype = BUS_USB; - input_dev->id.vendor = cinergyt2->udev->descriptor.idVendor; - input_dev->id.product = cinergyt2->udev->descriptor.idProduct; + input_dev->id.vendor = le16_to_cpu(cinergyt2->udev->descriptor.idVendor); + input_dev->id.product = le16_to_cpu(cinergyt2->udev->descriptor.idProduct); input_dev->id.version = 1; input_dev->dev.parent = &cinergyt2->udev->dev; @@ -889,18 +893,16 @@ static void cinergyt2_query (struct work_struct *work) char cmd [] = { CINERGYT2_EP1_GET_TUNER_STATUS }; struct dvbt_get_status_msg *s = &cinergyt2->status; uint8_t lock_bits; - uint32_t unc; if (cinergyt2->disconnect_pending || mutex_lock_interruptible(&cinergyt2->sem)) return; - unc = s->uncorrected_block_count; lock_bits = s->lock_bits; cinergyt2_command(cinergyt2, cmd, sizeof(cmd), (char *) s, sizeof(*s)); - unc += le32_to_cpu(s->uncorrected_block_count); - s->uncorrected_block_count = unc; + cinergyt2->uncorrected_block_count += + le32_to_cpu(s->uncorrected_block_count); if (lock_bits != s->lock_bits) { wake_up_interruptible(&cinergyt2->poll_wq); -- cgit v0.10.2 From a230e55d92347e09d9ba2e97096df114b2dfaf2d Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:41 -0300 Subject: V4L/DVB (7957): fix the roothole in av7110_av.c direct dereferencing from user-supplied address Signed-off-by: Al Viro Reviewed-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index 3e6b650..ec55a968 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -965,8 +965,9 @@ static u8 iframe_header[] = { 0x00, 0x00, 0x01, 0xe0, 0x00, 0x00, 0x80, 0x00, 0x static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len, int nonblock) { - int i, n; + unsigned i, n; int progressive = 0; + int match = 0; dprintk(2, "av7110:%p, \n", av7110); @@ -975,12 +976,31 @@ static int play_iframe(struct av7110 *av7110, char __user *buf, unsigned int len return -EBUSY; } - for (i = 0; i < len - 5; i++) { - /* get progressive flag from picture extension */ - if (buf[i] == 0x00 && buf[i+1] == 0x00 && - buf[i+2] == 0x01 && (unsigned char)buf[i+3] == 0xb5 && - (buf[i+4] & 0xf0) == 0x10) - progressive = buf[i+5] & 0x08; + /* search in buf for instances of 00 00 01 b5 1? */ + for (i = 0; i < len; i++) { + unsigned char c; + if (get_user(c, buf + i)) + return -EFAULT; + if (match == 5) { + progressive = c & 0x08; + match = 0; + } + if (c == 0x00) { + match = (match == 1 || match == 2) ? 2 : 1; + continue; + } + switch (match++) { + case 2: if (c == 0x01) + continue; + break; + case 3: if (c == 0xb5) + continue; + break; + case 4: if ((c & 0xf0) == 0x10) + continue; + break; + } + match = 0; } /* setting n always > 1, fixes problems when playing stillframes -- cgit v0.10.2 From 3e085629bc921c37c1bb2e2fb6227fa14de14682 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:30:51 -0300 Subject: V4L/DVB (7958): fix unaligned access in av7110.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 747e7f1..f05d43d 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -51,6 +51,7 @@ #include #include #include +#include #include @@ -1461,9 +1462,9 @@ static int check_firmware(struct av7110* av7110) ptr += 4; /* check dpram file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len >= 512) { printk("dvb-ttpci: dpram file is way too big.\n"); @@ -1478,9 +1479,9 @@ static int check_firmware(struct av7110* av7110) ptr += len; /* check root file */ - crc = ntohl(*(u32*) ptr); + crc = get_unaligned_be32(ptr); ptr += 4; - len = ntohl(*(u32*) ptr); + len = get_unaligned_be32(ptr); ptr += 4; if (len <= 200000 || len >= 300000 || -- cgit v0.10.2 From b05ce2e79ebaf205b2d66ac32f10e2bd231d80a4 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:01 -0300 Subject: V4L/DVB (7959): endianness fix in flexcop-usb.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 449fb5c..ae0d76a 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -379,7 +379,7 @@ static void flexcop_usb_transfer_exit(struct flexcop_usb *fc_usb) static int flexcop_usb_transfer_init(struct flexcop_usb *fc_usb) { - u16 frame_size = fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize; + u16 frame_size = le16_to_cpu(fc_usb->uintf->cur_altsetting->endpoint[0].desc.wMaxPacketSize); int bufsize = B2C2_USB_NUM_ISO_URB * B2C2_USB_FRAMES_PER_ISO * frame_size,i,j,ret; int buffer_offset = 0; -- cgit v0.10.2 From 12fbcef1055ee7dd522d578c4c6c0e80acaa3d4c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:11 -0300 Subject: V4L/DVB (7960): net: endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-core/dvb_net.c b/drivers/media/dvb/dvb-core/dvb_net.c index 56d871c..c2334ae 100644 --- a/drivers/media/dvb/dvb-core/dvb_net.c +++ b/drivers/media/dvb/dvb-core/dvb_net.c @@ -168,7 +168,7 @@ struct dvb_net_priv { * stolen from eth.c out of the linux kernel, hacked for dvb-device * by Michael Holzt */ -static unsigned short dvb_net_eth_type_trans(struct sk_buff *skb, +static __be16 dvb_net_eth_type_trans(struct sk_buff *skb, struct net_device *dev) { struct ethhdr *eth; @@ -277,10 +277,10 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if(ext_len >= 0) { p->ule_next_hdr += ext_len; if (!p->ule_bridged) { - p->ule_sndu_type = ntohs(*(unsigned short *)p->ule_next_hdr); + p->ule_sndu_type = ntohs(*(__be16 *)p->ule_next_hdr); p->ule_next_hdr += 2; } else { - p->ule_sndu_type = ntohs(*(unsigned short *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); + p->ule_sndu_type = ntohs(*(__be16 *)(p->ule_next_hdr + ((p->ule_dbit ? 2 : 3) * ETH_ALEN))); /* This assures the extension handling loop will terminate. */ } } @@ -294,7 +294,7 @@ static int handle_one_ule_extension( struct dvb_net_priv *p ) if (ule_optional_ext_handlers[htype]) (void)ule_optional_ext_handlers[htype]( p ); p->ule_next_hdr += ext_len; - p->ule_sndu_type = ntohs( *(unsigned short *)(p->ule_next_hdr-2) ); + p->ule_sndu_type = ntohs( *(__be16 *)(p->ule_next_hdr-2) ); /* * note: the length of the next header type is included in the * length of THIS optional extension header @@ -594,8 +594,8 @@ static void dvb_net_ule( struct net_device *dev, const u8 *buf, size_t buf_len ) /* Check for complete payload. */ if (priv->ule_sndu_remain <= 0) { /* Check CRC32, we've got it in our skb already. */ - unsigned short ulen = htons(priv->ule_sndu_len); - unsigned short utype = htons(priv->ule_sndu_type); + __be16 ulen = htons(priv->ule_sndu_len); + __be16 utype = htons(priv->ule_sndu_type); const u8 *tail; struct kvec iov[3] = { { &ulen, sizeof ulen }, -- cgit v0.10.2 From da5ee48677b96dbf44c2ae46857dea060af34164 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:21 -0300 Subject: V4L/DVB (7961): fix endianness bug in dib0700_devices.c Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dib0700_devices.c b/drivers/media/dvb/dvb-usb/dib0700_devices.c index 3462238..c4d40fe 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_devices.c +++ b/drivers/media/dvb/dvb-usb/dib0700_devices.c @@ -111,8 +111,8 @@ static int bristol_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c = dib3000mc_get_tuner_i2c_master(adap->fe, 1); s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_500_2) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_500_2)) { if (!eeprom_read(prim_i2c,0x59 + adap->id,&a)) if1=1220+a; } return dvb_attach(mt2060_attach,adap->fe, tun_i2c,&bristol_mt2060_config[adap->id], @@ -402,8 +402,8 @@ static int stk7700ph_frontend_attach(struct dvb_usb_adapter *adap) { struct usb_device_descriptor *desc = &adap->dev->udev->descriptor; - if (desc->idVendor == USB_VID_PINNACLE && - desc->idProduct == USB_PID_PINNACLE_EXPRESSCARD_320CX) + if (desc->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + desc->idProduct == cpu_to_le16(USB_PID_PINNACLE_EXPRESSCARD_320CX)) dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); @@ -845,8 +845,8 @@ static int stk7700p_tuner_attach(struct dvb_usb_adapter *adap) struct i2c_adapter *tun_i2c; s8 a; int if1=1220; - if (adap->dev->udev->descriptor.idVendor == USB_VID_HAUPPAUGE && - adap->dev->udev->descriptor.idProduct == USB_PID_HAUPPAUGE_NOVA_T_STICK) { + if (adap->dev->udev->descriptor.idVendor == cpu_to_le16(USB_VID_HAUPPAUGE) && + adap->dev->udev->descriptor.idProduct == cpu_to_le16(USB_PID_HAUPPAUGE_NOVA_T_STICK)) { if (!eeprom_read(prim_i2c,0x58,&a)) if1=1220+a; } if (st->is_dib7000pc) @@ -990,11 +990,12 @@ static struct dib7000p_config dib7070p_dib7000p_config = { /* STK7070P */ static int stk7070p_frontend_attach(struct dvb_usb_adapter *adap) { - if (adap->dev->udev->descriptor.idVendor == USB_VID_PINNACLE && - adap->dev->udev->descriptor.idProduct == USB_PID_PINNACLE_PCTV72E) - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); + struct usb_device_descriptor *p = &adap->dev->udev->descriptor; + if (p->idVendor == cpu_to_le16(USB_VID_PINNACLE) && + p->idProduct == cpu_to_le16(USB_PID_PINNACLE_PCTV72E)) + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); else - dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); + dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 1); msleep(10); dib0700_set_gpio(adap->dev, GPIO9, GPIO_OUT, 1); dib0700_set_gpio(adap->dev, GPIO4, GPIO_OUT, 1); -- cgit v0.10.2 From d4f979a9e1c5c8ed291e89ec38248823c9a182ba Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:31 -0300 Subject: V4L/DVB (7962): ttusb endianness annotations and fixes Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index 732ce4d..5d2d81a 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -552,7 +552,7 @@ static void ttusb_process_muxpack(struct ttusb *ttusb, const u8 * muxpack, u16 csum = 0, cc; int i; for (i = 0; i < len; i += 2) - csum ^= le16_to_cpup((u16 *) (muxpack + i)); + csum ^= le16_to_cpup((__le16 *) (muxpack + i)); if (csum) { printk("%s: muxpack with incorrect checksum, ignoring\n", __func__); diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 42eee04..fefdc05 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -343,7 +343,7 @@ static int ttusb_dec_get_stb_state (struct ttusb_dec *dec, unsigned int *mode, u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; - unsigned int tmp; + __be32 tmp; dprintk("%s\n", __func__); @@ -398,9 +398,9 @@ static void ttusb_dec_set_pids(struct ttusb_dec *dec) 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff }; - u16 pcr = htons(dec->pid[DMX_PES_PCR]); - u16 audio = htons(dec->pid[DMX_PES_AUDIO]); - u16 video = htons(dec->pid[DMX_PES_VIDEO]); + __be16 pcr = htons(dec->pid[DMX_PES_PCR]); + __be16 audio = htons(dec->pid[DMX_PES_AUDIO]); + __be16 video = htons(dec->pid[DMX_PES_VIDEO]); dprintk("%s\n", __func__); @@ -435,7 +435,7 @@ static void ttusb_dec_process_pva(struct ttusb_dec *dec, u8 *pva, int length) case 0x01: { /* VideoStream */ int prebytes = pva[5] & 0x03; int postbytes = (pva[5] & 0x0c) >> 2; - u16 v_pes_payload_length; + __be16 v_pes_payload_length; if (output_pva) { dec->video_filter->feed->cb.ts(pva, length, NULL, 0, @@ -1006,7 +1006,7 @@ static int ttusb_dec_start_sec_feed(struct dvb_demux_feed *dvbdmxfeed) 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u16 pid; + __be16 pid; u8 c[COMMAND_PACKET_SIZE]; int c_length; int result; @@ -1278,9 +1278,10 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) u8 *firmware = NULL; size_t firmware_size = 0; u16 firmware_csum = 0; - u16 firmware_csum_ns; - u32 firmware_size_nl; - u32 crc32_csum, crc32_check, tmp; + __be16 firmware_csum_ns; + __be32 firmware_size_nl; + u32 crc32_csum, crc32_check; + __be32 tmp; const struct firmware *fw_entry = NULL; dprintk("%s\n", __func__); @@ -1306,7 +1307,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) valid. */ crc32_csum = crc32(~0L, firmware, 56) ^ ~0L; memcpy(&tmp, &firmware[56], 4); - crc32_check = htonl(tmp); + crc32_check = ntohl(tmp); if (crc32_csum != crc32_check) { printk("%s: crc32 check of DSP code failed (calculated " "0x%08x != 0x%08x in file), file invalid.\n", @@ -1627,7 +1628,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, usb_set_intfdata(intf, (void *)dec); - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: ttusb_dec_set_model(dec, TTUSB_DEC3000S); break; @@ -1652,7 +1653,7 @@ static int ttusb_dec_probe(struct usb_interface *intf, ttusb_dec_init_dvb(dec); dec->adapter.priv = dec; - switch (le16_to_cpu(id->idProduct)) { + switch (id->idProduct) { case 0x1006: dec->fe = ttusbdecfe_dvbs_attach(&fe_config); break; diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index eb5eaec..443af24 100644 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -86,7 +86,7 @@ static int ttusbdecfe_dvbt_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0xff, 0x00, 0x00, 0x00, 0xff }; - u32 freq = htonl(p->frequency / 1000); + __be32 freq = htonl(p->frequency / 1000); memcpy(&b[4], &freq, sizeof (u32)); state->config->send_command(fe, 0x71, sizeof(b), b, NULL, NULL); @@ -117,10 +117,10 @@ static int ttusbdecfe_dvbs_set_frontend(struct dvb_frontend* fe, struct dvb_fron 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }; - u32 freq; - u32 sym_rate; - u32 band; - u32 lnb_voltage; + __be32 freq; + __be32 sym_rate; + __be32 band; + __be32 lnb_voltage; freq = htonl(p->frequency + (state->hi_band ? LOF_HI : LOF_LO)); -- cgit v0.10.2 From b0510f8dc73dce56f35337487c6374ae84b15446 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:41 -0300 Subject: V4L/DVB (7963): ivtv: trivial annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/ivtv/ivtv-driver.h b/drivers/media/video/ivtv/ivtv-driver.h index ba06e81..9d23b1e 100644 --- a/drivers/media/video/ivtv/ivtv-driver.h +++ b/drivers/media/video/ivtv/ivtv-driver.h @@ -259,6 +259,12 @@ struct ivtv_mailbox_data { /* Scatter-Gather array element, used in DMA transfers */ struct ivtv_sg_element { + __le32 src; + __le32 dst; + __le32 size; +}; + +struct ivtv_sg_host_element { u32 src; u32 dst; u32 size; @@ -349,8 +355,8 @@ struct ivtv_stream { u16 dma_xfer_cnt; /* Base Dev SG Array for cx23415/6 */ - struct ivtv_sg_element *sg_pending; - struct ivtv_sg_element *sg_processing; + struct ivtv_sg_host_element *sg_pending; + struct ivtv_sg_host_element *sg_processing; struct ivtv_sg_element *sg_dma; dma_addr_t sg_handle; int sg_pending_size; diff --git a/drivers/media/video/ivtv/ivtv-fileops.c b/drivers/media/video/ivtv/ivtv-fileops.c index f2fa434..db813e0 100644 --- a/drivers/media/video/ivtv/ivtv-fileops.c +++ b/drivers/media/video/ivtv/ivtv-fileops.c @@ -587,7 +587,7 @@ retry: since we may get here before the stream has been fully set-up */ if (mode == OUT_YUV && s->q_full.length == 0 && itv->dma_data_req_size) { while (count >= itv->dma_data_req_size) { - if (!ivtv_yuv_udma_stream_frame (itv, (void *)user_buf)) { + if (!ivtv_yuv_udma_stream_frame (itv, (void __user *)user_buf)) { bytes_written += itv->dma_data_req_size; user_buf += itv->dma_data_req_size; count -= itv->dma_data_req_size; diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c index d8ba3a4..fba150a 100644 --- a/drivers/media/video/ivtv/ivtv-irq.c +++ b/drivers/media/video/ivtv/ivtv-irq.c @@ -231,14 +231,14 @@ static void dma_post(struct ivtv_stream *s) struct ivtv_buffer *buf = NULL; struct list_head *p; u32 offset; - u32 *u32buf; + __le32 *u32buf; int x = 0; IVTV_DEBUG_HI_DMA("%s %s completed (%x)\n", ivtv_use_pio(s) ? "PIO" : "DMA", s->name, s->dma_offset); list_for_each(p, &s->q_dma.list) { buf = list_entry(p, struct ivtv_buffer, list); - u32buf = (u32 *)buf->buf; + u32buf = (__le32 *)buf->buf; /* Sync Buffer */ ivtv_buf_sync_for_cpu(s, buf); @@ -444,7 +444,7 @@ static void ivtv_dma_enc_start(struct ivtv_stream *s) } s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; @@ -473,7 +473,7 @@ static void ivtv_dma_dec_start(struct ivtv_stream *s) if (s->q_predma.bytesused) ivtv_queue_move(s, &s->q_predma, NULL, &s->q_dma, s->q_predma.bytesused); s->dma_xfer_cnt++; - memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_element) * s->sg_pending_size); + memcpy(s->sg_processing, s->sg_pending, sizeof(struct ivtv_sg_host_element) * s->sg_pending_size); s->sg_processing_size = s->sg_pending_size; s->sg_pending_size = 0; s->sg_processed = 0; diff --git a/drivers/media/video/ivtv/ivtv-queue.c b/drivers/media/video/ivtv/ivtv-queue.c index fc8b1ea..71bd13e 100644 --- a/drivers/media/video/ivtv/ivtv-queue.c +++ b/drivers/media/video/ivtv/ivtv-queue.c @@ -193,7 +193,7 @@ void ivtv_flush_queues(struct ivtv_stream *s) int ivtv_stream_alloc(struct ivtv_stream *s) { struct ivtv *itv = s->itv; - int SGsize = sizeof(struct ivtv_sg_element) * s->buffers; + int SGsize = sizeof(struct ivtv_sg_host_element) * s->buffers; int i; if (s->buffers == 0) diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c index a9417f6..3092ff1 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.c +++ b/drivers/media/video/ivtv/ivtv-yuv.c @@ -1116,7 +1116,7 @@ void ivtv_yuv_setup_stream_frame(struct ivtv *itv) } /* Attempt to dma a frame from a user buffer */ -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src) +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src) { struct yuv_playback_info *yi = &itv->yuv_info; struct ivtv_dma_frame dma_args; diff --git a/drivers/media/video/ivtv/ivtv-yuv.h b/drivers/media/video/ivtv/ivtv-yuv.h index 2fe5f12..ca5173f 100644 --- a/drivers/media/video/ivtv/ivtv-yuv.h +++ b/drivers/media/video/ivtv/ivtv-yuv.h @@ -35,7 +35,7 @@ extern const u32 yuv_offset[IVTV_YUV_BUFFERS]; int ivtv_yuv_filter_check(struct ivtv *itv); void ivtv_yuv_setup_stream_frame(struct ivtv *itv); -int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void *src); +int ivtv_yuv_udma_stream_frame(struct ivtv *itv, void __user *src); void ivtv_yuv_frame_complete(struct ivtv *itv); int ivtv_yuv_prep_frame(struct ivtv *itv, struct ivtv_dma_frame *args); void ivtv_yuv_close(struct ivtv *itv); -- cgit v0.10.2 From 990c81c8afcd71eced2482ad59950ea755eddc7f Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:01 -0300 Subject: V4L/DVB (7964): cx18 iomem annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 472f88e..4f5d231 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -670,7 +670,7 @@ static int __devinit cx18_probe(struct pci_dev *dev, cx18_init_power(cx, 1); cx18_init_memory(cx); - cx->scb = (struct cx18_scb *)(cx->enc_mem + SCB_OFFSET); + cx->scb = (struct cx18_scb __iomem *)(cx->enc_mem + SCB_OFFSET); cx18_init_scb(cx); cx18_gpio_init(cx); diff --git a/drivers/media/video/cx18/cx18-driver.h b/drivers/media/video/cx18/cx18-driver.h index b943aea..de14ab5 100644 --- a/drivers/media/video/cx18/cx18-driver.h +++ b/drivers/media/video/cx18/cx18-driver.h @@ -358,7 +358,7 @@ struct cx18 { u32 v4l2_cap; /* V4L2 capabilities of card */ u32 hw_flags; /* Hardware description of the board */ unsigned mdl_offset; - struct cx18_scb *scb; /* pointer to SCB */ + struct cx18_scb __iomem *scb; /* pointer to SCB */ struct cx18_av_state av_state; diff --git a/drivers/media/video/cx18/cx18-fileops.c b/drivers/media/video/cx18/cx18-fileops.c index d0d7888..1e537fe 100644 --- a/drivers/media/video/cx18/cx18-fileops.c +++ b/drivers/media/video/cx18/cx18-fileops.c @@ -361,7 +361,8 @@ static ssize_t cx18_read(struct cx18_stream *s, char __user *ubuf, cx18_enqueue(s, buf, &s->q_free); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - + cx->enc_mem, 1, buf->id, s->buf_size); } else cx18_enqueue(s, buf, &s->q_io); diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 6e14f8b..0590d71 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -75,7 +75,7 @@ static void epu_dma_done(struct cx18 *cx, struct cx18_mailbox *mb) cx18_buf_sync_for_device(s, buf); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, buf->id, s->buf_size); } else set_bit(CX18_F_B_NEED_BUF_SWAP, &buf->b_flags); diff --git a/drivers/media/video/cx18/cx18-mailbox.c b/drivers/media/video/cx18/cx18-mailbox.c index 0c5f328..2a5ccef 100644 --- a/drivers/media/video/cx18/cx18-mailbox.c +++ b/drivers/media/video/cx18/cx18-mailbox.c @@ -94,10 +94,10 @@ static const struct cx18_api_info *find_api_info(u32 cmd) return NULL; } -static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu, +static struct cx18_mailbox __iomem *cx18_mb_is_complete(struct cx18 *cx, int rpu, u32 *state, u32 *irq, u32 *req) { - struct cx18_mailbox *mb = NULL; + struct cx18_mailbox __iomem *mb = NULL; int wait_count = 0; u32 ack; @@ -142,7 +142,7 @@ static struct cx18_mailbox *cx18_mb_is_complete(struct cx18 *cx, int rpu, long cx18_mb_ack(struct cx18 *cx, const struct cx18_mailbox *mb) { const struct cx18_api_info *info = find_api_info(mb->cmd); - struct cx18_mailbox *ack_mb; + struct cx18_mailbox __iomem *ack_mb; u32 ack_irq; u8 rpu = CPU; @@ -182,7 +182,7 @@ static int cx18_api_call(struct cx18 *cx, u32 cmd, int args, u32 data[]) { const struct cx18_api_info *info = find_api_info(cmd); u32 state = 0, irq = 0, req, oldreq, err; - struct cx18_mailbox *mb; + struct cx18_mailbox __iomem *mb; wait_queue_head_t *waitq; int timeout = 100; int cnt = 0; diff --git a/drivers/media/video/cx18/cx18-streams.c b/drivers/media/video/cx18/cx18-streams.c index 5a06586..1b921a3 100644 --- a/drivers/media/video/cx18/cx18-streams.c +++ b/drivers/media/video/cx18/cx18-streams.c @@ -473,8 +473,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) } cx18_vapi(cx, CX18_CPU_DE_SET_MDL_ACK, 3, s->handle, - (void *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, - (void *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][0] - cx->enc_mem, + (void __iomem *)&cx->scb->cpu_mdl_ack[s->type][1] - cx->enc_mem); list_for_each(p, &s->q_free.list) { struct cx18_buffer *buf = list_entry(p, struct cx18_buffer, list); @@ -482,8 +482,8 @@ int cx18_start_v4l2_encode_stream(struct cx18_stream *s) writel(buf->dma_handle, &cx->scb->cpu_mdl[buf->id].paddr); writel(s->buf_size, &cx->scb->cpu_mdl[buf->id].length); cx18_vapi(cx, CX18_CPU_DE_SET_MDL, 5, s->handle, - (void *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, 1, - buf->id, s->buf_size); + (void __iomem *)&cx->scb->cpu_mdl[buf->id] - cx->enc_mem, + 1, buf->id, s->buf_size); } /* begin_capture */ if (cx18_vapi(cx, CX18_CPU_CAPTURE_START, 1, s->handle)) { -- cgit v0.10.2 From d8eaa58b06e8779453410d88d2d86e700a0432c6 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:31:51 -0300 Subject: V4L/DVB (7965): annotate bcx_riscmem Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-risc.c b/drivers/media/video/bt8xx/bttv-risc.c index e5979f7..0af5868 100644 --- a/drivers/media/video/bt8xx/bttv-risc.c +++ b/drivers/media/video/bt8xx/bttv-risc.c @@ -48,7 +48,7 @@ bttv_risc_packed(struct bttv *btv, struct btcx_riscmem *risc, { u32 instructions,line,todo; struct scatterlist *sg; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -128,7 +128,8 @@ bttv_risc_planar(struct bttv *btv, struct btcx_riscmem *risc, unsigned int cpadding) { unsigned int instructions,line,todo,ylen,chroma; - u32 *rp,ri; + __le32 *rp; + u32 ri; struct scatterlist *ysg; struct scatterlist *usg; struct scatterlist *vsg; @@ -244,7 +245,8 @@ bttv_risc_overlay(struct bttv *btv, struct btcx_riscmem *risc, { int dwords,rc,line,maxy,start,end,skip,nskips; struct btcx_skiplist *skips; - u32 *rp,ri,ra; + __le32 *rp; + u32 ri,ra; u32 addr; /* skip list for window clipping */ diff --git a/drivers/media/video/btcx-risc.c b/drivers/media/video/btcx-risc.c index ce0840c..f42701f 100644 --- a/drivers/media/video/btcx-risc.c +++ b/drivers/media/video/btcx-risc.c @@ -63,7 +63,7 @@ int btcx_riscmem_alloc(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int size) { - u32 *cpu; + __le32 *cpu; dma_addr_t dma; if (NULL != risc->cpu && risc->size < size) diff --git a/drivers/media/video/btcx-risc.h b/drivers/media/video/btcx-risc.h index 503e6c6..861bc81 100644 --- a/drivers/media/video/btcx-risc.h +++ b/drivers/media/video/btcx-risc.h @@ -2,8 +2,8 @@ */ struct btcx_riscmem { unsigned int size; - u32 *cpu; - u32 *jmp; + __le32 *cpu; + __le32 *jmp; dma_addr_t dma; }; diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index f24abcd..c4cc2f3 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -823,7 +823,7 @@ static void cx23885_dev_unregister(struct cx23885_dev *dev) iounmap(dev->lmmio); } -static u32* cx23885_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx23885_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines) @@ -883,7 +883,7 @@ int cx23885_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int padding, unsigned int lines) { u32 instructions, fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -924,7 +924,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, unsigned int lines) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -951,7 +951,7 @@ static int cx23885_risc_databuffer(struct pci_dev *pci, int cx23885_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) diff --git a/drivers/media/video/cx88/cx88-core.c b/drivers/media/video/cx88/cx88-core.c index c4d1aff..60eeda3 100644 --- a/drivers/media/video/cx88/cx88-core.c +++ b/drivers/media/video/cx88/cx88-core.c @@ -70,7 +70,7 @@ static DEFINE_MUTEX(devlist); /* @lpi: lines per IRQ, or 0 to not generate irqs. Note: IRQ to be generated _after_ lpi lines are transferred. */ -static u32* cx88_risc_field(u32 *rp, struct scatterlist *sglist, +static __le32* cx88_risc_field(__le32 *rp, struct scatterlist *sglist, unsigned int offset, u32 sync_line, unsigned int bpl, unsigned int padding, unsigned int lines, unsigned int lpi) @@ -130,7 +130,7 @@ int cx88_risc_buffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int bpl, unsigned int padding, unsigned int lines) { u32 instructions,fields; - u32 *rp; + __le32 *rp; int rc; fields = 0; @@ -168,7 +168,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, unsigned int lines, unsigned int lpi) { u32 instructions; - u32 *rp; + __le32 *rp; int rc; /* estimate risc mem: worst case is one write per page border + @@ -193,7 +193,7 @@ int cx88_risc_databuffer(struct pci_dev *pci, struct btcx_riscmem *risc, int cx88_risc_stopper(struct pci_dev *pci, struct btcx_riscmem *risc, u32 reg, u32 mask, u32 value) { - u32 *rp; + __le32 *rp; int rc; if ((rc = btcx_riscmem_alloc(pci, risc, 4*16)) < 0) -- cgit v0.10.2 From 576904bb8941d2ae958a097888cee418d5192144 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:11 -0300 Subject: V4L/DVB (7966): cx18: direct dereferencing of iomem Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-irq.c b/drivers/media/video/cx18/cx18-irq.c index 0590d71..25114a5 100644 --- a/drivers/media/video/cx18/cx18-irq.c +++ b/drivers/media/video/cx18/cx18-irq.c @@ -161,13 +161,15 @@ irqreturn_t cx18_irq_handler(int irq, void *dev_id) */ if (sw2) { - if (sw2 & (cx->scb->cpu2hpu_irq_ack | cx->scb->cpu2epu_irq_ack)) + if (sw2 & (readl(&cx->scb->cpu2hpu_irq_ack) | + readl(&cx->scb->cpu2epu_irq_ack))) wake_up(&cx->mb_cpu_waitq); - if (sw2 & (cx->scb->apu2hpu_irq_ack | cx->scb->apu2epu_irq_ack)) + if (sw2 & (readl(&cx->scb->apu2hpu_irq_ack) | + readl(&cx->scb->apu2epu_irq_ack))) wake_up(&cx->mb_apu_waitq); - if (sw2 & cx->scb->epu2hpu_irq_ack) + if (sw2 & readl(&cx->scb->epu2hpu_irq_ack)) wake_up(&cx->mb_epu_waitq); - if (sw2 & cx->scb->hpu2epu_irq_ack) + if (sw2 & readl(&cx->scb->hpu2epu_irq_ack)) wake_up(&cx->mb_hpu_waitq); } -- cgit v0.10.2 From c1c36f3128c89aa96f01cbf6d40b0cd77a8bc45e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:21 -0300 Subject: V4L/DVB (7967): bt8xx: unaligned access Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c index f20a01c..8ef0424 100644 --- a/drivers/media/video/bt8xx/bttv-cards.c +++ b/drivers/media/video/bt8xx/bttv-cards.c @@ -34,6 +34,7 @@ #include #include +#include #include #include "bttvp.h" @@ -3858,7 +3859,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) ee += i; /* found a valid descriptor */ - type = be16_to_cpup((u16*)(ee+4)); + type = get_unaligned_be16((__be16 *)(ee+4)); switch(type) { /* 848 based */ @@ -3918,7 +3919,7 @@ static void __devinit osprey_eeprom(struct bttv *btv, const u8 ee[256]) btv->c.nr, type); break; } - serial = be32_to_cpup((u32*)(ee+6)); + serial = get_unaligned_be32((__be32 *)(ee+6)); } printk(KERN_INFO "bttv%d: osprey eeprom: card=%d '%s' serial=%u\n", -- cgit v0.10.2 From 581a7f1a2ddedbc27ad76f518b861ce1e60ff5ab Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:31 -0300 Subject: V4L/DVB (7968): zoran: endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/zoran.h b/drivers/media/video/zoran.h index 81cc3b0..46b7ad4 100644 --- a/drivers/media/video/zoran.h +++ b/drivers/media/video/zoran.h @@ -285,7 +285,7 @@ struct zoran_mapping { struct zoran_jpg_buffer { struct zoran_mapping *map; - u32 *frag_tab; /* addresses of frag table */ + __le32 *frag_tab; /* addresses of frag table */ u32 frag_tab_bus; /* same value cached to save time in ISR */ enum zoran_buffer_state state; /* non-zero if corresponding buffer is in use in grab queue */ struct zoran_sync bs; /* DONE: info to return to application */ @@ -450,7 +450,7 @@ struct zoran { unsigned long jpg_queued_num; /* count of frames queued since grab/play started */ /* zr36057's code buffer table */ - u32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ + __le32 *stat_com; /* stat_com[i] is indexed by dma_head/tail & BUZ_MASK_STAT_COM */ /* (value & BUZ_MASK_FRAME) corresponds to index in pend[] queue */ int jpg_pend[BUZ_MAX_FRAME]; diff --git a/drivers/media/video/zoran_device.c b/drivers/media/video/zoran_device.c index 37629ff..88d3697 100644 --- a/drivers/media/video/zoran_device.c +++ b/drivers/media/video/zoran_device.c @@ -1320,7 +1320,7 @@ error_handler (struct zoran *zr, if (i) { /* Rotate stat_comm entries to make current entry first */ int j; - u32 bus_addr[BUZ_NUM_STAT_COM]; + __le32 bus_addr[BUZ_NUM_STAT_COM]; /* Here we are copying the stat_com array, which * is already in little endian format, so diff --git a/drivers/media/video/zoran_driver.c b/drivers/media/video/zoran_driver.c index b75313d..5394d7a 100644 --- a/drivers/media/video/zoran_driver.c +++ b/drivers/media/video/zoran_driver.c @@ -495,7 +495,7 @@ jpg_fbuffer_alloc (struct file *file) jpg_fbuffer_free(file); return -ENOBUFS; } - fh->jpg_buffers.buffer[i].frag_tab = (u32 *) mem; + fh->jpg_buffers.buffer[i].frag_tab = (__le32 *) mem; fh->jpg_buffers.buffer[i].frag_tab_bus = virt_to_bus((void *) mem); @@ -4506,7 +4506,7 @@ zoran_mmap (struct file *file, if (todo > fraglen) todo = fraglen; pos = - le32_to_cpu((unsigned long) fh->jpg_buffers. + le32_to_cpu(fh->jpg_buffers. buffer[i].frag_tab[2 * j]); /* should just be pos on i386 */ page = virt_to_phys(bus_to_virt(pos)) -- cgit v0.10.2 From fa9c13a383ea60b5e0a89e9e180683411bc5552c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:41 -0300 Subject: V4L/DVB (7969): m920x: unaligned access Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/m920x.c b/drivers/media/dvb/dvb-usb/m920x.c index a12e6f7..54626a0 100644 --- a/drivers/media/dvb/dvb-usb/m920x.c +++ b/drivers/media/dvb/dvb-usb/m920x.c @@ -16,6 +16,7 @@ #include "qt1010.h" #include "tda1004x.h" #include "tda827x.h" +#include /* debug */ static int dvb_usb_m920x_debug; @@ -347,13 +348,13 @@ static int m920x_firmware_download(struct usb_device *udev, const struct firmwar for (pass = 0; pass < 2; pass++) { for (i = 0; i + (sizeof(u16) * 3) < fw->size;) { - value = le16_to_cpu(*(u16 *)(fw->data + i)); + value = get_unaligned_le16(fw->data + i); i += sizeof(u16); - index = le16_to_cpu(*(u16 *)(fw->data + i)); + index = get_unaligned_le16(fw->data + i); i += sizeof(u16); - size = le16_to_cpu(*(u16 *)(fw->data + i)); + size = get_unaligned_le16(fw->data + i); i += sizeof(u16); if (pass == 1) { -- cgit v0.10.2 From a954b6681dd389e6bb63d9b5f3254d675f6984c9 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:32:51 -0300 Subject: V4L/DVB (7970): mix trivial endianness annotations Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index 8996175..fb163ec 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1166,13 +1166,13 @@ static int vidioc_g_register(struct file *file, void *priv, reg->val = ret; } else { - u64 val = 0; + __le64 val = 0; ret = em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS, reg->reg, (char *)&val, 2); if (ret < 0) return ret; - reg->val = cpu_to_le64((__u64)val); + reg->val = le64_to_cpu(val); } return 0; @@ -1183,9 +1183,9 @@ static int vidioc_s_register(struct file *file, void *priv, { struct em28xx_fh *fh = priv; struct em28xx *dev = fh->dev; - u64 buf; + __le64 buf; - buf = le64_to_cpu((__u64)reg->val); + buf = cpu_to_le64(reg->val); return em28xx_write_regs(dev, reg->reg, (char *)&buf, em28xx_reg_len(reg->reg)); diff --git a/drivers/media/video/usbvideo/quickcam_messenger.c b/drivers/media/video/usbvideo/quickcam_messenger.c index 32e536e..3d26a30 100644 --- a/drivers/media/video/usbvideo/quickcam_messenger.c +++ b/drivers/media/video/usbvideo/quickcam_messenger.c @@ -210,7 +210,7 @@ static int qcm_stv_setb(struct usb_device *dev, u16 reg, u8 val) return ret; } -static int qcm_stv_setw(struct usb_device *dev, u16 reg, u16 val) +static int qcm_stv_setw(struct usb_device *dev, u16 reg, __le16 val) { int ret; -- cgit v0.10.2 From 637007fe5cfc790c46e3d7af8ba069ddd73f389c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:33:01 -0300 Subject: V4L/DVB (7971): usb: unaligned Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c index e1112e3..733a7ff 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-firmware.c @@ -127,7 +127,7 @@ int dvb_usb_get_hexline(const struct firmware *fw, struct hexline *hx, if ((*pos + hx->len + 4) >= fw->size) return -EINVAL; - hx->addr = le16_to_cpu( *((u16 *) &b[1]) ); + hx->addr = b[1] | (b[2] << 8); hx->type = b[3]; if (hx->type == 0x04) { -- cgit v0.10.2 From 18dcd55a8bf8aa7009c647725b5234c9589c6985 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Wed, 21 May 2008 00:33:11 -0300 Subject: V4L/DVB (7972): or51132.c: unaligned Signed-off-by: Al Viro Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/or51132.c b/drivers/media/dvb/frontends/or51132.c index c7b5785..5ed3254 100644 --- a/drivers/media/dvb/frontends/or51132.c +++ b/drivers/media/dvb/frontends/or51132.c @@ -126,7 +126,7 @@ static int or51132_readreg(struct or51132_state *state, u8 reg) reg, err); return -EREMOTEIO; } - return le16_to_cpup((u16*)buf); + return buf[0] | (buf[1] << 8); } static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware *fw) @@ -140,9 +140,9 @@ static int or51132_load_firmware (struct dvb_frontend* fe, const struct firmware dprintk("Firmware is %Zd bytes\n",fw->size); /* Get size of firmware A and B */ - firmwareAsize = le32_to_cpu(*((u32*)fw->data)); + firmwareAsize = le32_to_cpu(*((__le32*)fw->data)); dprintk("FirmwareA is %i bytes\n",firmwareAsize); - firmwareBsize = le32_to_cpu(*((u32*)(fw->data+4))); + firmwareBsize = le32_to_cpu(*((__le32*)(fw->data+4))); dprintk("FirmwareB is %i bytes\n",firmwareBsize); /* Upload firmware */ -- cgit v0.10.2 From 6637dea60ec93916ea0623a0e9bcc2b1769cbc11 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 20 May 2008 19:34:09 -0300 Subject: V4L/DVB (7974): fix MEDIA_TUNER && FW_LOADER build error -tip testing found the following build failure: LD .tmp_vmlinux1 drivers/built-in.o: In function `generic_set_freq': tuner-xc2028.c:(.text+0xbd896): undefined reference to `request_firmware' tuner-xc2028.c:(.text+0xbdd7a): undefined reference to `release_firmware' drivers/built-in.o: In function `xc_load_fw_and_init_tuner': xc5000.c:(.text+0xc68e6): undefined reference to `request_firmware' xc5000.c:(.text+0xc6abe): undefined reference to `release_firmware' with this config: http://redhat.com/~mingo/misc/config-Tue_May_20_18_11_34_CEST_2008.bad the reason is another kconfig tool bug that has to be worked around in the driver's Kconfig file: if FW_LOADER is selected in a second dependency, that is not properly propagated up the dependencies. in this case, FW_LOADER is selected from MEDIA_TUNER_XC2028: config MEDIA_TUNER_XC2028 tristate "XCeive xc2028/xc3028 tuners" depends on VIDEO_MEDIA && I2C depends on HOTPLUG select FW_LOADER which got selected by MEDIA_TUNER: config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG but the kconfig tool did not pick up this second-order dependency and allowed CONFIG_FW_LOADER=m to be selected - in which case the build fails. the workaround i found was to move the select of FW_LOADER one level up, so that the buggy kconfig tool can notice it and can act appropriately. This problem can probably be worked around in other ways as well, i went for the minimal fix. Obviously, the kconfig tool should be fixed, it is not reasonable to expect driver authors to do manual dependency resolution (that kconfig itself already does) and uglify the Kconfig files. The kconfig tool did nothing to warn about this situation and did not prevent this faulty .config from being constructed. Signed-off-by: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/Kconfig b/drivers/media/common/tuners/Kconfig index d620654..8548296 100644 --- a/drivers/media/common/tuners/Kconfig +++ b/drivers/media/common/tuners/Kconfig @@ -21,6 +21,7 @@ config MEDIA_TUNER tristate default VIDEO_MEDIA && I2C depends on VIDEO_MEDIA && I2C + select FW_LOADER if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_XC2028 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_XC5000 if !MEDIA_TUNER_CUSTOMIZE && HOTPLUG select MEDIA_TUNER_MT20XX if !MEDIA_TUNER_CUSTOMIZE -- cgit v0.10.2 From 388748e61cc59487c34e1dfa890ffc44e4d16b1f Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Wed, 21 May 2008 01:20:34 -0300 Subject: V4L/DVB (7975): saa7134_empress This is patch for fix data structure in querycap syscall. Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 1314522..81431ee 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -163,8 +163,7 @@ ts_mmap(struct file *file, struct vm_area_struct * vma) static int empress_querycap(struct file *file, void *priv, struct v4l2_capability *cap) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; strcpy(cap->driver, "saa7134"); strlcpy(cap->card, saa7134_boards[dev->board].name, -- cgit v0.10.2 From 5e7fdc5ed820516f8253cc7daad27cf3ee6bd784 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 30 May 2008 10:51:53 -0300 Subject: V4L/DVB (7977): cx18: fix init order and remove duplicate open_on_first_use. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-driver.c b/drivers/media/video/cx18/cx18-driver.c index 4f5d231..2b810bb 100644 --- a/drivers/media/video/cx18/cx18-driver.c +++ b/drivers/media/video/cx18/cx18-driver.c @@ -751,17 +751,6 @@ static int __devinit cx18_probe(struct pci_dev *dev, if (cx->options.radio > 0) cx->v4l2_cap |= V4L2_CAP_RADIO; - retval = cx18_streams_setup(cx); - if (retval) { - CX18_ERR("Error %d setting up streams\n", retval); - goto free_irq; - } - retval = cx18_streams_register(cx); - if (retval) { - CX18_ERR("Error %d registering devices\n", retval); - goto free_streams; - } - if (cx->options.tuner > -1) { struct tuner_setup setup; @@ -788,7 +777,16 @@ static int __devinit cx18_probe(struct pci_dev *dev, are not. */ cx->tuner_std = cx->std; - cx18_init_on_first_open(cx); + retval = cx18_streams_setup(cx); + if (retval) { + CX18_ERR("Error %d setting up streams\n", retval); + goto free_irq; + } + retval = cx18_streams_register(cx); + if (retval) { + CX18_ERR("Error %d registering devices\n", retval); + goto free_streams; + } CX18_INFO("Initialized card #%d: %s\n", cx->num, cx->card_name); -- cgit v0.10.2 From 4ecc24737700f07d6c2a8fdf8c1737e399f1830f Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Fri, 30 May 2008 11:03:12 -0300 Subject: V4L/DVB (7978): cx18: explicitly test for XC2028 tuner Testing whether xceive_pin is non-zero is not good enough as 0 is a valid value. Instead explicitly test whether the Xceive tuner is used. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index 2f324b8..ceb6365 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -62,7 +62,7 @@ void cx18_gpio_init(struct cx18 *cx) cx->gpio_dir = cx->card->gpio_init.direction; cx->gpio_val = cx->card->gpio_init.initial_value; - if (cx->card->xceive_pin) { + if (cx->card->tuners[0].tuner == TUNER_XC2028) { cx->gpio_dir |= 1 << cx->card->xceive_pin; cx->gpio_val |= 1 << cx->card->xceive_pin; } -- cgit v0.10.2 From fc60d6e2727157b53d49c8d55888d0a78dafbc9f Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sat, 31 May 2008 18:18:55 -0300 Subject: V4L/DVB (7983): tda18271_calc_rf_cal must return the return value of tda18271_lookup_map On the TDA18271HD/C1, we perform RF tracking filter correction for VHF low band, only. If supplied a frequency out of range, the error must be returned to the caller (tda18271c1_rf_tracking_filter_calibration) so that it can decide whether or not to write to register EB14, RFC_CPROG[7:0] Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index 42b5f5d..f1894fe 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -648,11 +648,11 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) unsigned char *regs = priv->tda18271_regs; u8 val; - tda18271_lookup_map(fe, RF_CAL, freq, &val); + int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); regs[R_EB14] = val; - return 0; + return ret; } /* -- cgit v0.10.2 From a9606ce697ed719071fcccee8591ff033fa5e16d Mon Sep 17 00:00:00 2001 From: Daniel Gimpelevich Date: Tue, 3 Jun 2008 21:29:45 -0300 Subject: V4L/DVB (7990): Fix entry for PowerColor RA 330 and make it run with firmware version 2.7 Signed-off-by: Daniel Gimpelevich Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.cx88 b/Documentation/video4linux/CARDLIST.cx88 index 5439573..7cf5685 100644 --- a/Documentation/video4linux/CARDLIST.cx88 +++ b/Documentation/video4linux/CARDLIST.cx88 @@ -60,7 +60,7 @@ 59 -> DViCO FusionHDTV 5 PCI nano [18ac:d530] 60 -> Pinnacle Hybrid PCTV [12ab:1788] 61 -> Winfast TV2000 XP Global [107d:6f18] - 62 -> PowerColor Real Angel 330 [14f1:ea3d] + 62 -> PowerColor RA330 [14f1:ea3d] 63 -> Geniatech X8000-MT DVBT [14f1:8852] 64 -> DViCO FusionHDTV DVB-T PRO [18ac:db30] 65 -> DViCO FusionHDTV 7 Gold [18ac:d610] diff --git a/drivers/media/video/cx88/cx88-cards.c b/drivers/media/video/cx88/cx88-cards.c index aeba26d..fa6d398 100644 --- a/drivers/media/video/cx88/cx88-cards.c +++ b/drivers/media/video/cx88/cx88-cards.c @@ -1493,10 +1493,16 @@ static const struct cx88_board cx88_boards[] = { }, }, [CX88_BOARD_POWERCOLOR_REAL_ANGEL] = { - .name = "PowerColor Real Angel 330", + .name = "PowerColor RA330", /* Long names may confuse LIRC. */ .tuner_type = TUNER_XC2028, .tuner_addr = 0x61, .input = { { + .type = CX88_VMUX_DEBUG, + .vmux = 3, /* Due to the way the cx88 driver is written, */ + .gpio0 = 0x00ff, /* there is no way to deactivate audio pass- */ + .gpio1 = 0xf39d, /* through without this entry. Furthermore, if */ + .gpio3 = 0x0000, /* the TV mux entry is first, you get audio */ + }, { /* from the tuner on boot for a little while. */ .type = CX88_VMUX_TELEVISION, .vmux = 0, .gpio0 = 0x00ff, @@ -2424,8 +2430,9 @@ void cx88_setup_xc3028(struct cx88_core *core, struct xc2028_ctrl *ctl) switch (core->boardnr) { case CX88_BOARD_POWERCOLOR_REAL_ANGEL: - /* Doesn't work with firmware version 2.7 */ - ctl->fname = "xc3028-v25.fw"; + /* Now works with firmware version 2.7 */ + if (core->i2c_algo.udelay < 16) + core->i2c_algo.udelay = 16; break; case CX88_BOARD_DVICO_FUSIONHDTV_DVB_T_PRO: ctl->scode_table = XC3028_FE_ZARLINK456; -- cgit v0.10.2 From 67642a0a58143761d7415f0587e0ac6dd6371251 Mon Sep 17 00:00:00 2001 From: Sigmund Augdal Date: Thu, 5 Jun 2008 12:53:08 -0300 Subject: V4L/DVB (8000): tda827x: fix NULL pointer in tda827xa_lna_gain Check that tda827x_config is defined before attempting to use it. Signed-off-by: Sigmund Augdal Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda827x.c b/drivers/media/common/tuners/tda827x.c index d30d2c9..8555d9c 100644 --- a/drivers/media/common/tuners/tda827x.c +++ b/drivers/media/common/tuners/tda827x.c @@ -418,13 +418,13 @@ static void tda827xa_lna_gain(struct dvb_frontend *fe, int high, unsigned char buf[] = {0x22, 0x01}; int arg; int gp_func; - struct i2c_msg msg = { .addr = priv->cfg->switch_addr, .flags = 0, - .buf = buf, .len = sizeof(buf) }; + struct i2c_msg msg = { .flags = 0, .buf = buf, .len = sizeof(buf) }; if (NULL == priv->cfg) { dprintk("tda827x_config not defined, cannot set LNA gain!\n"); return; } + msg.addr = priv->cfg->switch_addr; if (priv->cfg->config) { if (high) dprintk("setting LNA to high gain\n"); -- cgit v0.10.2 From be573e7872432918e1017cf1e917e73817dcdad6 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Thu, 5 Jun 2008 13:08:29 -0300 Subject: V4L/DVB (8001): dib0070: fix dib0070_attach when !CONFIG_DVB_TUNER_DIB0070 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/dib0070.h b/drivers/media/dvb/frontends/dib0070.h index 786e37d..3eedfdf 100644 --- a/drivers/media/dvb/frontends/dib0070.h +++ b/drivers/media/dvb/frontends/dib0070.h @@ -37,7 +37,20 @@ struct dib0070_config { u8 flip_chip; }; -extern struct dvb_frontend * dib0070_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, struct dib0070_config *cfg); +#if defined(CONFIG_DVB_TUNER_DIB0070) || (defined(CONFIG_DVB_TUNER_DIB0070_MODULE) && defined(MODULE)) +extern struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg); +#else +static inline struct dvb_frontend *dib0070_attach(struct dvb_frontend *fe, + struct i2c_adapter *i2c, + struct dib0070_config *cfg) +{ + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; +} +#endif + extern void dib0070_ctrl_agc_filter(struct dvb_frontend *, uint8_t open); extern u16 dib0070_wbd_offset(struct dvb_frontend *); -- cgit v0.10.2 From 6311c90a9ea16b4ab93ed48f1a9022647f6b3c43 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Thu, 5 Jun 2008 14:44:39 +0100 Subject: libata: fix G5 SATA broken on -rc5 Fix G5 SATA irq 18: nobody cared, reported on -rc5 by Olaf Hering: fixlet to a57c1bade5a0ee5cd8b74502db9cbebb7f5780b2 libata-sff: Fix oops reported in kerneloops.org for pnp devices with no ctl Signed-off-by: Hugh Dickins Acked-by: Alan Cox Tested-by: Olaf Hering Signed-off-by: Linus Torvalds diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 90d20c6..215d186 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -278,7 +278,7 @@ static u8 ata_sff_irq_status(struct ata_port *ap) return status; } /* Clear INTRQ latch */ - status = ata_sff_check_status(ap); + status = ap->ops->sff_check_status(ap); return status; } -- cgit v0.10.2 From b1fb05cdb9096e3fe1af4474e108dedce2515801 Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 7 May 2008 13:42:55 +0200 Subject: [MIPS] Alchemy: export get_au1x00_speed for modules au1xmmc.c driver depends on it, so export it for modules. Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle diff --git a/arch/mips/au1000/common/clocks.c b/arch/mips/au1000/common/clocks.c index 46f8ee0..043429d 100644 --- a/arch/mips/au1000/common/clocks.c +++ b/arch/mips/au1000/common/clocks.c @@ -45,6 +45,7 @@ unsigned int get_au1x00_speed(void) { return au1x00_clock; } +EXPORT_SYMBOL(get_au1x00_speed); /* * The UART baud base is not known at compile time ... if -- cgit v0.10.2 From ccdb0034f8d5321be42c479dd7fc872ba2a46adb Mon Sep 17 00:00:00 2001 From: Manuel Lauss Date: Wed, 7 May 2008 13:45:23 +0200 Subject: [MIPS] Alchemy: dbdma: add API to delete custom DDMA device ids. Add API to delete custom DDMA device ids create with au1xxx_ddma_device_add(). Signed-off-by: Manuel Lauss Signed-off-by: Ralf Baechle diff --git a/arch/mips/au1000/common/dbdma.c b/arch/mips/au1000/common/dbdma.c index 42d5552..601ee91 100644 --- a/arch/mips/au1000/common/dbdma.c +++ b/arch/mips/au1000/common/dbdma.c @@ -216,6 +216,17 @@ u32 au1xxx_ddma_add_device(dbdev_tab_t *dev) } EXPORT_SYMBOL(au1xxx_ddma_add_device); +void au1xxx_ddma_del_device(u32 devid) +{ + dbdev_tab_t *p = find_dbdev_id(devid); + + if (p != NULL) { + memset(p, 0, sizeof(dbdev_tab_t)); + p->dev_id = ~0; + } +} +EXPORT_SYMBOL(au1xxx_ddma_del_device); + /* Allocate a channel and return a non-zero descriptor if successful. */ u32 au1xxx_dbdma_chan_alloc(u32 srcid, u32 destid, void (*callback)(int, void *), void *callparam) diff --git a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h index ad17d7c..44a67bf 100644 --- a/include/asm-mips/mach-au1x00/au1xxx_dbdma.h +++ b/include/asm-mips/mach-au1x00/au1xxx_dbdma.h @@ -355,6 +355,7 @@ void au1xxx_dbdma_dump(u32 chanid); u32 au1xxx_dbdma_put_dscr(u32 chanid, au1x_ddma_desc_t *dscr); u32 au1xxx_ddma_add_device(dbdev_tab_t *dev); +extern void au1xxx_ddma_del_device(u32 devid); void *au1xxx_ddma_get_nextptr_virt(au1x_ddma_desc_t *dp); /* -- cgit v0.10.2 From 326e2e1a59decc81bea052e8a8c6d75c63daa2db Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 12 May 2008 13:55:42 +0200 Subject: [MIPS] R4700: Fix build_tlb_probe_entry Treat R4700 like R4600 in build_tlb_probe_entry. Without this fix kernel will lock up. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/tlbex.c b/arch/mips/mm/tlbex.c index 382738c..76da73a 100644 --- a/arch/mips/mm/tlbex.c +++ b/arch/mips/mm/tlbex.c @@ -224,8 +224,9 @@ static u32 final_handler[64] __cpuinitdata; static void __cpuinit __maybe_unused build_tlb_probe_entry(u32 **p) { switch (current_cpu_type()) { - /* Found by experiment: R4600 v2.0 needs this, too. */ + /* Found by experiment: R4600 v2.0/R4700 needs this, too. */ case CPU_R4600: + case CPU_R4700: case CPU_R5000: case CPU_R5000A: case CPU_NEVADA: -- cgit v0.10.2 From 057229f9efc7ebebd3ce0496195ed46df631f383 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 2 May 2008 14:08:20 +0300 Subject: [MIPS] Add missing braces to pte_mkyoung MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Only the version pte_mkyoung for 36-bit pagetables on 32-bit hw was affected and with this bug being around since November 29, 2004 there is evidence to suport the assumption it was benign ;-) Signed-off-by: Ilpo Järvinen Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/pgtable.h b/include/asm-mips/pgtable.h index 2f597ee..6a0edf7 100644 --- a/include/asm-mips/pgtable.h +++ b/include/asm-mips/pgtable.h @@ -239,9 +239,10 @@ static inline pte_t pte_mkdirty(pte_t pte) static inline pte_t pte_mkyoung(pte_t pte) { pte.pte_low |= _PAGE_ACCESSED; - if (pte.pte_low & _PAGE_READ) + if (pte.pte_low & _PAGE_READ) { pte.pte_low |= _PAGE_SILENT_READ; pte.pte_high |= _PAGE_SILENT_READ; + } return pte; } #else -- cgit v0.10.2 From 10220c884444a1866bb070e207d84fc18188e2a7 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Mon, 12 May 2008 17:58:48 +0200 Subject: [MIPS] Fix check for valid stack pointer during backtrace The newly added check for valid stack pointer address breaks at least for 64bit kernels. Use __get_user() for accessing stack content to avoid crashes, when doing the backtrace. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c index cb8b0e2..f9165d1 100644 --- a/arch/mips/kernel/traps.c +++ b/arch/mips/kernel/traps.c @@ -88,15 +88,17 @@ static void show_raw_backtrace(unsigned long reg29) #ifdef CONFIG_KALLSYMS printk("\n"); #endif -#define IS_KVA01(a) ((((unsigned int)a) & 0xc0000000) == 0x80000000) - if (IS_KVA01(sp)) { - while (!kstack_end(sp)) { - addr = *sp++; - if (__kernel_text_address(addr)) - print_ip_sym(addr); + while (!kstack_end(sp)) { + unsigned long __user *p = + (unsigned long __user *)(unsigned long)sp++; + if (__get_user(addr, p)) { + printk(" (Bad stack address)"); + break; } - printk("\n"); + if (__kernel_text_address(addr)) + print_ip_sym(addr); } + printk("\n"); } #ifdef CONFIG_KALLSYMS -- cgit v0.10.2 From c2719d93836b0b0cdf1725449d87705da6ede9a5 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 21 May 2008 01:55:02 +0300 Subject: [MIPS] remove CONFIG_CPU_R4000 line from Makefile The existing options are named CONFIG_CPU_R4300 and CONFIG_CPU_R4X00, and they are directly below. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index cc02440..65e46a6 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -30,7 +30,6 @@ obj-$(CONFIG_CPU_LOONGSON2) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS32) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_MIPS64) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R3000) += r2300_fpu.o r2300_switch.o -obj-$(CONFIG_CPU_R4000) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4300) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R4X00) += r4k_fpu.o r4k_switch.o obj-$(CONFIG_CPU_R5000) += r4k_fpu.o r4k_switch.o -- cgit v0.10.2 From 2bf8ec2d8137e66998435ddf6d4060a558e2f727 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 8 Apr 2008 23:43:46 +0200 Subject: [MIPS] IP27: Fix bootmem memory setup Changes in the generic bootmem code broke memory setup for IP27. This patch fixes this by replacing lots of special IP27 code with generic bootmon code. This has been tested only on a single node. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/sgi-ip27/ip27-memory.c b/arch/mips/sgi-ip27/ip27-memory.c index bf438d0..42cd109 100644 --- a/arch/mips/sgi-ip27/ip27-memory.c +++ b/arch/mips/sgi-ip27/ip27-memory.c @@ -33,10 +33,6 @@ #define SLOT_PFNSHIFT (SLOT_SHIFT - PAGE_SHIFT) #define PFN_NASIDSHFT (NASID_SHFT - PAGE_SHIFT) -#define SLOT_IGNORED 0xffff - -static short __initdata slot_lastfilled_cache[MAX_COMPACT_NODES]; -static unsigned short __initdata slot_psize_cache[MAX_COMPACT_NODES][MAX_MEM_SLOTS]; static struct bootmem_data __initdata plat_node_bdata[MAX_COMPACT_NODES]; struct node_data *__node_data[MAX_COMPACT_NODES]; @@ -267,51 +263,6 @@ static pfn_t __init slot_getbasepfn(cnodeid_t cnode, int slot) return ((pfn_t)nasid << PFN_NASIDSHFT) | (slot << SLOT_PFNSHIFT); } -/* - * Return the number of pages of memory provided by the given slot - * on the specified node. - */ -static pfn_t __init slot_getsize(cnodeid_t node, int slot) -{ - return (pfn_t) slot_psize_cache[node][slot]; -} - -/* - * Return highest slot filled - */ -static int __init node_getlastslot(cnodeid_t node) -{ - return (int) slot_lastfilled_cache[node]; -} - -/* - * Return the pfn of the last free page of memory on a node. - */ -static pfn_t __init node_getmaxclick(cnodeid_t node) -{ - pfn_t slot_psize; - int slot; - - /* - * Start at the top slot. When we find a slot with memory in it, - * that's the winner. - */ - for (slot = (MAX_MEM_SLOTS - 1); slot >= 0; slot--) { - if ((slot_psize = slot_getsize(node, slot))) { - if (slot_psize == SLOT_IGNORED) - continue; - /* Return the basepfn + the slot size, minus 1. */ - return slot_getbasepfn(node, slot) + slot_psize - 1; - } - } - - /* - * If there's no memory on the node, return 0. This is likely - * to cause problems. - */ - return 0; -} - static pfn_t __init slot_psize_compute(cnodeid_t node, int slot) { nasid_t nasid; @@ -404,13 +355,13 @@ static void __init mlreset(void) static void __init szmem(void) { pfn_t slot_psize, slot0sz = 0, nodebytes; /* Hack to detect problem configs */ - int slot, ignore; + int slot; cnodeid_t node; num_physpages = 0; for_each_online_node(node) { - ignore = nodebytes = 0; + nodebytes = 0; for (slot = 0; slot < MAX_MEM_SLOTS; slot++) { slot_psize = slot_psize_compute(node, slot); if (slot == 0) @@ -420,21 +371,20 @@ static void __init szmem(void) * kernel text. */ nodebytes += (1LL << SLOT_SHIFT); + + if (!slot_psize) + continue; + if ((nodebytes >> PAGE_SHIFT) * (sizeof(struct page)) > - (slot0sz << PAGE_SHIFT)) - ignore = 1; - if (ignore && slot_psize) { + (slot0sz << PAGE_SHIFT)) { printk("Ignoring slot %d onwards on node %d\n", slot, node); - slot_psize_cache[node][slot] = SLOT_IGNORED; slot = MAX_MEM_SLOTS; continue; } num_physpages += slot_psize; - slot_psize_cache[node][slot] = - (unsigned short) slot_psize; - if (slot_psize) - slot_lastfilled_cache[node] = slot; + add_active_range(node, slot_getbasepfn(node, slot), + slot_getbasepfn(node, slot) + slot_psize); } } } @@ -442,18 +392,20 @@ static void __init szmem(void) static void __init node_mem_init(cnodeid_t node) { pfn_t slot_firstpfn = slot_getbasepfn(node, 0); - pfn_t slot_lastpfn = slot_firstpfn + slot_getsize(node, 0); pfn_t slot_freepfn = node_getfirstfree(node); - struct pglist_data *pd; unsigned long bootmap_size; + pfn_t start_pfn, end_pfn; + + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); /* * Allocate the node data structures on the node first. */ __node_data[node] = __va(slot_freepfn << PAGE_SHIFT); - pd = NODE_DATA(node); - pd->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->bdata = &plat_node_bdata[node]; + NODE_DATA(node)->node_start_pfn = start_pfn; + NODE_DATA(node)->node_spanned_pages = end_pfn - start_pfn; cpus_clear(hub_data(node)->h_cpus); @@ -461,12 +413,12 @@ static void __init node_mem_init(cnodeid_t node) sizeof(struct hub_data)); bootmap_size = init_bootmem_node(NODE_DATA(node), slot_freepfn, - slot_firstpfn, slot_lastpfn); - free_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, - (slot_lastpfn - slot_firstpfn) << PAGE_SHIFT); + start_pfn, end_pfn); + free_bootmem_with_active_regions(node, end_pfn); reserve_bootmem_node(NODE_DATA(node), slot_firstpfn << PAGE_SHIFT, ((slot_freepfn - slot_firstpfn) << PAGE_SHIFT) + bootmap_size, BOOTMEM_DEFAULT); + sparse_memory_present_with_active_regions(node); } /* @@ -515,16 +467,15 @@ void __init paging_init(void) pagetable_init(); for_each_online_node(node) { - pfn_t start_pfn = slot_getbasepfn(node, 0); - pfn_t end_pfn = node_getmaxclick(node) + 1; + pfn_t start_pfn, end_pfn; - zones_size[ZONE_NORMAL] = end_pfn - start_pfn; - free_area_init_node(node, NODE_DATA(node), - zones_size, start_pfn, NULL); + get_pfn_range_for_nid(node, &start_pfn, &end_pfn); if (end_pfn > max_low_pfn) max_low_pfn = end_pfn; } + zones_size[ZONE_NORMAL] = max_low_pfn; + free_area_init_nodes(zones_size); } void __init mem_init(void) @@ -535,34 +486,10 @@ void __init mem_init(void) high_memory = (void *) __va(num_physpages << PAGE_SHIFT); for_each_online_node(node) { - unsigned slot, numslots; - struct page *end, *p; - /* * This will free up the bootmem, ie, slot 0 memory. */ totalram_pages += free_all_bootmem_node(NODE_DATA(node)); - - /* - * We need to manually do the other slots. - */ - numslots = node_getlastslot(node); - for (slot = 1; slot <= numslots; slot++) { - p = nid_page_nr(node, slot_getbasepfn(node, slot) - - slot_getbasepfn(node, 0)); - - /* - * Free valid memory in current slot. - */ - for (end = p + slot_getsize(node, slot); p < end; p++) { - /* if (!page_is_ram(pgnr)) continue; */ - /* commented out until page_is_ram works */ - ClearPageReserved(p); - init_page_count(p); - __free_page(p); - totalram_pages++; - } - } } totalram_pages -= setup_zero_pages(); /* This comes from node 0 */ -- cgit v0.10.2 From b32bb803fb52cc669762780d44b4c3d9e3d799f6 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 8 Apr 2008 23:43:57 +0200 Subject: [MIPS] IP27: Fix clockevent setup Fix breakage introduced by converting hub_rt to clockevent. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/sgi-ip27/ip27-smp.c b/arch/mips/sgi-ip27/ip27-smp.c index f15fc93..ba5cdeb 100644 --- a/arch/mips/sgi-ip27/ip27-smp.c +++ b/arch/mips/sgi-ip27/ip27-smp.c @@ -176,11 +176,14 @@ static void ip27_send_ipi_mask(cpumask_t mask, unsigned int action) static void __cpuinit ip27_init_secondary(void) { per_cpu_init(); - local_irq_enable(); } static void __cpuinit ip27_smp_finish(void) { + extern void hub_rt_clock_event_init(void); + + hub_rt_clock_event_init(); + local_irq_enable(); } static void __init ip27_cpus_done(void) diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 9cebc9e..8b4e854 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -160,10 +160,13 @@ static void rt_set_mode(enum clock_event_mode mode, int rt_timer_irq; +static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); +static DEFINE_PER_CPU(char [11], hub_rt_name); + static irqreturn_t hub_rt_counter_handler(int irq, void *dev_id) { - struct clock_event_device *cd = dev_id; unsigned int cpu = smp_processor_id(); + struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); int slice = cputoslice(cpu); /* @@ -192,10 +195,7 @@ struct irqaction hub_rt_irqaction = { #define NSEC_PER_CYCLE 800 #define CYCLES_PER_SEC (NSEC_PER_SEC / NSEC_PER_CYCLE) -static DEFINE_PER_CPU(struct clock_event_device, hub_rt_clockevent); -static DEFINE_PER_CPU(char [11], hub_rt_name); - -static void __cpuinit hub_rt_clock_event_init(void) +void __cpuinit hub_rt_clock_event_init(void) { unsigned int cpu = smp_processor_id(); struct clock_event_device *cd = &per_cpu(hub_rt_clockevent, cpu); @@ -203,17 +203,16 @@ static void __cpuinit hub_rt_clock_event_init(void) int irq = rt_timer_irq; sprintf(name, "hub-rt %d", cpu); - cd->name = "HUB-RT", - cd->features = CLOCK_EVT_FEAT_ONESHOT, + cd->name = name; + cd->features = CLOCK_EVT_FEAT_ONESHOT; clockevent_set_clock(cd, CYCLES_PER_SEC); cd->max_delta_ns = clockevent_delta2ns(0xfffffffffffff, cd); cd->min_delta_ns = clockevent_delta2ns(0x300, cd); - cd->rating = 200, - cd->irq = irq, - cd->cpumask = cpumask_of_cpu(cpu), - cd->rating = 300, - cd->set_next_event = rt_next_event, - cd->set_mode = rt_set_mode, + cd->rating = 200; + cd->irq = irq; + cd->cpumask = cpumask_of_cpu(cpu); + cd->set_next_event = rt_next_event; + cd->set_mode = rt_set_mode; clockevents_register_device(cd); } @@ -261,6 +260,7 @@ void __init plat_time_init(void) { hub_rt_clocksource_init(); hub_rt_clock_event_global_init(); + hub_rt_clock_event_init(); } void __cpuinit cpu_time_init(void) @@ -281,7 +281,6 @@ void __cpuinit cpu_time_init(void) printk("CPU %d clock is %dMHz.\n", smp_processor_id(), cpu->cpu_speed); - hub_rt_clock_event_init(); set_c0_status(SRB_TIMOCLK); } -- cgit v0.10.2 From 96173a6c4ebca4c146bb87026cce78bbe392cb61 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 17 Apr 2008 22:07:42 +0200 Subject: [MIPS] IP27: misc fixes - fix PCI interrupt assignment by emulating ioc3 interrupt pin register - use pci_probe_only mode - select correct page size in bridge - remove no longer needed ioc3_sio_init() code [Ralf: Fix for 64kB or larger pagesizes] Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/ops-bridge.c b/arch/mips/pci/ops-bridge.c index 1fa0992..b46b3e2 100644 --- a/arch/mips/pci/ops-bridge.c +++ b/arch/mips/pci/ops-bridge.c @@ -14,6 +14,22 @@ #include /* + * Most of the IOC3 PCI config register aren't present + * we emulate what is needed for a normal PCI enumeration + */ +static u32 emulate_ioc3_cfg(int where, int size) +{ + if (size == 1 && where == 0x3d) + return 0x01; + else if (size == 2 && where == 0x3c) + return 0x0100; + else if (size == 4 && where == 0x3c) + return 0x00000100; + + return 0; +} + +/* * The Bridge ASIC supports both type 0 and type 1 access. Type 1 is * not really documented, so right now I can't write code which uses it. * Therefore we use type 0 accesses for now even though they won't work @@ -64,7 +80,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } @@ -127,7 +143,7 @@ oh_my_gawd: * generic PCI code a chance to look at the wrong register. */ if ((where >= 0x14 && where < 0x40) || (where >= 0x48)) { - *value = 0; + *value = emulate_ioc3_cfg(where, size); return PCIBIOS_SUCCESSFUL; } diff --git a/arch/mips/pci/pci-ip27.c b/arch/mips/pci/pci-ip27.c index bb64828..a185169 100644 --- a/arch/mips/pci/pci-ip27.c +++ b/arch/mips/pci/pci-ip27.c @@ -47,6 +47,9 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) static int num_bridges = 0; bridge_t *bridge; int slot; + extern int pci_probe_only; + + pci_probe_only = 1; printk("a bridge\n"); @@ -100,6 +103,11 @@ int __cpuinit bridge_probe(nasid_t nasid, int widget_id, int masterwid) */ bridge->b_wid_control |= BRIDGE_CTRL_IO_SWAP | BRIDGE_CTRL_MEM_SWAP; +#ifdef CONFIG_PAGE_SIZE_4KB + bridge->b_wid_control &= ~BRIDGE_CTRL_PAGE_SIZE; +#else /* 16kB or larger */ + bridge->b_wid_control |= BRIDGE_CTRL_PAGE_SIZE; +#endif /* * Hmm... IRIX sets additional bits in the address which diff --git a/arch/mips/sgi-ip27/ip27-init.c b/arch/mips/sgi-ip27/ip27-init.c index 7093e7c..4a500e8 100644 --- a/arch/mips/sgi-ip27/ip27-init.c +++ b/arch/mips/sgi-ip27/ip27-init.c @@ -161,27 +161,6 @@ cnodeid_t get_compact_nodeid(void) return NASID_TO_COMPACT_NODEID(get_nasid()); } -/* Extracted from the IOC3 meta driver. FIXME. */ -static inline void ioc3_sio_init(void) -{ - struct ioc3 *ioc3; - nasid_t nid; - long loops; - - nid = get_nasid(); - ioc3 = (struct ioc3 *) KL_CONFIG_CH_CONS_INFO(nid)->memory_base; - - ioc3->sscr_a = 0; /* PIO mode for uarta. */ - ioc3->sscr_b = 0; /* PIO mode for uartb. */ - ioc3->sio_iec = ~0; - ioc3->sio_ies = (SIO_IR_SA_INT | SIO_IR_SB_INT); - - loops=1000000; while(loops--); - ioc3->sregs.uarta.iu_fcr = 0; - ioc3->sregs.uartb.iu_fcr = 0; - loops=1000000; while(loops--); -} - static inline void ioc3_eth_init(void) { struct ioc3 *ioc3; @@ -234,7 +213,6 @@ void __init plat_mem_setup(void) panic("Kernel compiled for N mode."); #endif - ioc3_sio_init(); ioc3_eth_init(); per_cpu_init(); -- cgit v0.10.2 From 272bace7f3753ea8bf6ee80e3a6b32fa64190744 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 26 May 2008 09:35:47 +0100 Subject: [MIPS] Add accessors for random register. Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/mipsregs.h b/include/asm-mips/mipsregs.h index aa17f65..a46f8e2 100644 --- a/include/asm-mips/mipsregs.h +++ b/include/asm-mips/mipsregs.h @@ -765,6 +765,9 @@ do { \ #define read_c0_index() __read_32bit_c0_register($0, 0) #define write_c0_index(val) __write_32bit_c0_register($0, 0, val) +#define read_c0_random() __read_32bit_c0_register($1, 0) +#define write_c0_random(val) __write_32bit_c0_register($1, 0, val) + #define read_c0_entrylo0() __read_ulong_c0_register($2, 0) #define write_c0_entrylo0(val) __write_ulong_c0_register($2, 0, val) -- cgit v0.10.2 From 482845a348f76fbf9cec6dda0f1eb113d4fafd9d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 26 May 2008 09:47:55 +0100 Subject: [MIPS] Fix build error - Delete debugging crap that crept in with CMP Signed-off-by: Ralf Baechle diff --git a/arch/mips/mips-boards/generic/time.c b/arch/mips/mips-boards/generic/time.c index 008fd82..fe2cac1 100644 --- a/arch/mips/mips-boards/generic/time.c +++ b/arch/mips/mips-boards/generic/time.c @@ -58,27 +58,8 @@ static int mips_cpu_timer_irq; static int mips_cpu_perf_irq; extern int cp0_perfcount_irq; -DEFINE_PER_CPU(unsigned int, tickcount); -#define tickcount_this_cpu __get_cpu_var(tickcount) -static unsigned long ledbitmask; - static void mips_timer_dispatch(void) { -#if defined(CONFIG_MIPS_MALTA) || defined(CONFIG_MIPS_ATLAS) - /* - * Yes, this is very tacky, won't work as expected with SMTC and - * dyntick will break it, - * but it gives me a nice warm feeling during debug - */ -#define LEDBAR 0xbf000408 - if (tickcount_this_cpu++ >= HZ) { - tickcount_this_cpu = 0; - change_bit(smp_processor_id(), &ledbitmask); - smp_wmb(); /* Make sure every one else sees the change */ - /* This will pick up any recent changes made by other CPU's */ - *(unsigned int *)LEDBAR = ledbitmask; - } -#endif do_IRQ(mips_cpu_timer_irq); } -- cgit v0.10.2 From 2cc3c0b67bdde7263f6eb16c16709e0b84047646 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Tue, 27 May 2008 17:27:28 +0200 Subject: [MIPS] Fix typo in header guard Signed-off-by: Vegard Nossum Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/rtlx.h b/include/asm-mips/rtlx.h index 20b6660..4ca3063 100644 --- a/include/asm-mips/rtlx.h +++ b/include/asm-mips/rtlx.h @@ -3,7 +3,7 @@ * */ -#ifndef __ASM_RTLX_H +#ifndef __ASM_RTLX_H_ #define __ASM_RTLX_H_ #include -- cgit v0.10.2 From cd9da13d6ef4f4b652a9a885d4a7c80e40fed229 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Wed, 7 May 2008 23:38:15 +0900 Subject: Fix divide by zero error in build_clear_page() and build_copy_page() Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index d827d61..cab81f4 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -310,8 +310,8 @@ void __cpuinit build_clear_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_clear_store / cache_line_size) * - cache_line_size; + off = cache_line_size ? min(8, pref_bias_clear_store / cache_line_size) + * cache_line_size : 0; while (off) { build_clear_pref(&buf, -off); off -= cache_line_size; @@ -454,12 +454,14 @@ void __cpuinit build_copy_page(void) if (R4600_V2_HIT_CACHEOP_WAR && cpu_is_r4600_v2_x()) uasm_i_lui(&buf, AT, 0xa000); - off = min(8, pref_bias_copy_load / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = min(8, pref_bias_copy_store / cache_line_size) * cache_line_size; + off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); off -= cache_line_size; -- cgit v0.10.2 From 5a515bcbea580a65ced92405b083299df9003748 Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Thu, 5 Jun 2008 10:32:23 -0600 Subject: PNP: skip UNSET MEM resources as well as DISABLED ones We don't need to reserve "unset" resources. Trying to reserve them results in messages like this, which are ugly but harmless: system 00:08: iomem range 0x0-0x0 could not be reserved Future PNP patches will remove use of IORESOURCE_UNSET, but we still need it for now. Signed-off-by: Bjorn Helgaas Signed-off-by: Linus Torvalds diff --git a/drivers/pnp/system.c b/drivers/pnp/system.c index 8f0a570..cf4e07b 100644 --- a/drivers/pnp/system.c +++ b/drivers/pnp/system.c @@ -81,7 +81,7 @@ static void reserve_resources_of_dev(struct pnp_dev *dev) } for (i = 0; (res = pnp_get_resource(dev, IORESOURCE_MEM, i)); i++) { - if (res->flags & IORESOURCE_DISABLED) + if (res->flags & (IORESOURCE_UNSET | IORESOURCE_DISABLED)) continue; reserve_range(dev, res->start, res->end, 0); -- cgit v0.10.2 From 609a70ac927b72da647ccee7873d928d45055eae Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 5 Jun 2008 17:07:35 +0100 Subject: FRV: ip_fast_csum() requires a memory clobber on its inline asm ip_fast_csum() requires a memory clobber on its inline asm as it accesses memory in a fashion that gcc can't predict. The GCC manual says: If your assembler instructions access memory in an unpredictable fashion, add `memory' to the list of clobbered registers. This will cause GCC to not keep memory values cached in registers across the assembler instruction and not optimize stores or loads to that memory. The bug hasn't been noticed in FRV, but it has been seen in PA-RISC. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/include/asm-frv/checksum.h b/include/asm-frv/checksum.h index 9b16898..269da09 100644 --- a/include/asm-frv/checksum.h +++ b/include/asm-frv/checksum.h @@ -75,7 +75,7 @@ __sum16 ip_fast_csum(const void *iph, unsigned int ihl) : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (inc), "=&r"(tmp) : "0" (sum), "1" (iph), "2" (ihl), "3" (4), "m"(*(volatile struct { int _[100]; } *)iph) - : "icc0", "icc1" + : "icc0", "icc1", "memory" ); return (__force __sum16)~sum; -- cgit v0.10.2 From 16104b5504fa8be130f7f127a5a1c7dd774efc44 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 22:47:13 +0200 Subject: x86: fix CONFIG_NONPROMISC_DEVMEM prompt and help text Here is an attempt to translate the prompt and help text into something which is legible and, as a bonus, correct. Signed-off-by: Stefan Richter Signed-off-by: Linus Torvalds diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index ac1e31b..1836337 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -6,15 +6,19 @@ config TRACE_IRQFLAGS_SUPPORT source "lib/Kconfig.debug" config NONPROMISC_DEVMEM - bool "Disable promiscuous /dev/mem" + bool "Filter access to /dev/mem" help - The /dev/mem file by default only allows userspace access to PCI - space and the BIOS code and data regions. This is sufficient for - dosemu and X and all common users of /dev/mem. With this config - option, you allow userspace access to all of memory, including - kernel and userspace memory. Accidental access to this is - obviously disasterous, but specific access can be used by people - debugging the kernel. + If this option is left off, you allow userspace access to all + of memory, including kernel and userspace memory. Accidental + access to this is obviously disastrous, but specific access can + be used by people debugging the kernel. + + If this option is switched on, the /dev/mem file only allows + userspace access to PCI space and the BIOS code and data regions. + This is sufficient for dosemu and X and all common users of + /dev/mem. + + If in doubt, say Y. config EARLY_PRINTK bool "Early printk" if EMBEDDED -- cgit v0.10.2 From efedf51c866130945b5db755cb58670e60205d83 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Wed, 4 Jun 2008 17:18:42 +0200 Subject: Add 'rd' alias to new brd ramdisk driver Alias brd to rd in the hope of helping legacy users. Suggested by Jan. Signed-off-by: Nick Piggin Signed-off-by: Linus Torvalds diff --git a/drivers/block/brd.c b/drivers/block/brd.c index 680cdfc..24b97b0 100644 --- a/drivers/block/brd.c +++ b/drivers/block/brd.c @@ -397,6 +397,7 @@ module_param(max_part, int, 0); MODULE_PARM_DESC(max_part, "Maximum number of partitions per RAM disk"); MODULE_LICENSE("GPL"); MODULE_ALIAS_BLOCKDEV_MAJOR(RAMDISK_MAJOR); +MODULE_ALIAS("rd"); #ifndef MODULE /* Legacy boot options - nonmodular */ -- cgit v0.10.2 From ddb2c43594f22843e9f3153da151deaba1a834c5 Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Wed, 4 Jun 2008 09:16:33 -0700 Subject: asn1: additional sanity checking during BER decoding - Don't trust a length which is greater than the working buffer. An invalid length could cause overflow when calculating buffer size for decoding oid. - An oid length of zero is invalid and allows for an off-by-one error when decoding oid because the first subid actually encodes first 2 subids. - A primitive encoding may not have an indefinite length. Thanks to Wei Wang from McAfee for report. Cc: Steven French Cc: stable@kernel.org Acked-by: Patrick McHardy Signed-off-by: Chris Wright Signed-off-by: Linus Torvalds diff --git a/fs/cifs/asn1.c b/fs/cifs/asn1.c index cb52cbb..f58e41d 100644 --- a/fs/cifs/asn1.c +++ b/fs/cifs/asn1.c @@ -186,6 +186,11 @@ asn1_length_decode(struct asn1_ctx *ctx, unsigned int *def, unsigned int *len) } } } + + /* don't trust len bigger than ctx buffer */ + if (*len > ctx->end - ctx->pointer) + return 0; + return 1; } @@ -203,6 +208,10 @@ asn1_header_decode(struct asn1_ctx *ctx, if (!asn1_length_decode(ctx, &def, &len)) return 0; + /* primitive shall be definite, indefinite shall be constructed */ + if (*con == ASN1_PRI && !def) + return 0; + if (def) *eoc = ctx->pointer + len; else @@ -389,6 +398,11 @@ asn1_oid_decode(struct asn1_ctx *ctx, unsigned long *optr; size = eoc - ctx->pointer + 1; + + /* first subid actually encodes first two subids */ + if (size < 2 || size > ULONG_MAX/sizeof(unsigned long)) + return 0; + *oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC); if (*oid == NULL) return 0; diff --git a/net/ipv4/netfilter/nf_nat_snmp_basic.c b/net/ipv4/netfilter/nf_nat_snmp_basic.c index 5daefad..7750c97 100644 --- a/net/ipv4/netfilter/nf_nat_snmp_basic.c +++ b/net/ipv4/netfilter/nf_nat_snmp_basic.c @@ -232,6 +232,11 @@ static unsigned char asn1_length_decode(struct asn1_ctx *ctx, } } } + + /* don't trust len bigger than ctx buffer */ + if (*len > ctx->end - ctx->pointer) + return 0; + return 1; } @@ -250,6 +255,10 @@ static unsigned char asn1_header_decode(struct asn1_ctx *ctx, if (!asn1_length_decode(ctx, &def, &len)) return 0; + /* primitive shall be definite, indefinite shall be constructed */ + if (*con == ASN1_PRI && !def) + return 0; + if (def) *eoc = ctx->pointer + len; else @@ -434,6 +443,11 @@ static unsigned char asn1_oid_decode(struct asn1_ctx *ctx, unsigned long *optr; size = eoc - ctx->pointer + 1; + + /* first subid actually encodes first two subids */ + if (size < 2 || size > ULONG_MAX/sizeof(unsigned long)) + return 0; + *oid = kmalloc(size * sizeof(unsigned long), GFP_ATOMIC); if (*oid == NULL) { if (net_ratelimit()) -- cgit v0.10.2 From adbd5886da5f467148b26cca3728ab0e672b3fcc Mon Sep 17 00:00:00 2001 From: Willy Tarreau Date: Tue, 3 Jun 2008 00:20:28 +0200 Subject: doc: add suggestions about good practises for maintainers Suggest how to deal with patch modifications caused by merging or back-porting when you're a maintainer. Signed-off-by: Willy Tarreau Signed-off-by: Linus Torvalds diff --git a/Documentation/SubmittingPatches b/Documentation/SubmittingPatches index 9c93a03..118ca6e 100644 --- a/Documentation/SubmittingPatches +++ b/Documentation/SubmittingPatches @@ -327,6 +327,52 @@ Some people also put extra tags at the end. They'll just be ignored for now, but you can do this to mark internal company procedures or just point out some special detail about the sign-off. +If you are a subsystem or branch maintainer, sometimes you need to slightly +modify patches you receive in order to merge them, because the code is not +exactly the same in your tree and the submitters'. If you stick strictly to +rule (c), you should ask the submitter to rediff, but this is a totally +counter-productive waste of time and energy. Rule (b) allows you to adjust +the code, but then it is very impolite to change one submitter's code and +make him endorse your bugs. To solve this problem, it is recommended that +you add a line between the last Signed-off-by header and yours, indicating +the nature of your changes. While there is nothing mandatory about this, it +seems like prepending the description with your mail and/or name, all +enclosed in square brackets, is noticeable enough to make it obvious that +you are responsible for last-minute changes. Example : + + Signed-off-by: Random J Developer + [lucky@maintainer.example.org: struct foo moved from foo.c to foo.h] + Signed-off-by: Lucky K Maintainer + +This practise is particularly helpful if you maintain a stable branch and +want at the same time to credit the author, track changes, merge the fix, +and protect the submitter from complaints. Note that under no circumstances +can you change the author's identity (the From header), as it is the one +which appears in the changelog. + +Special note to back-porters: It seems to be a common and useful practise +to insert an indication of the origin of a patch at the top of the commit +message (just after the subject line) to facilitate tracking. For instance, +here's what we see in 2.6-stable : + + Date: Tue May 13 19:10:30 2008 +0000 + + SCSI: libiscsi regression in 2.6.25: fix nop timer handling + + commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream + +And here's what appears in 2.4 : + + Date: Tue May 13 22:12:27 2008 +0200 + + wireless, airo: waitbusy() won't delay + + [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a] + +Whatever the format, this information provides a valuable help to people +tracking your trees, and to people trying to trouble-shoot bugs in your +tree. + 13) When to use Acked-by: and Cc: -- cgit v0.10.2 From 2bdd1b031b200d55c2512c8d7e0e9bdcf85d011f Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Thu, 5 Jun 2008 14:14:41 -0700 Subject: PCI/x86: fix up PCI stuff so that PCI_GOANY supports OLPC Previously, one would have to specifically choose CONFIG_OLPC and CONFIG_PCI_GOOLPC in order to enable PCI_OLPC. That doesn't really work for distro kernels, so this patch allows one to choose CONFIG_OLPC and CONFIG_PCI_GOANY in order to build in OLPC support in a generic kernel (as requested by Robert Millan). This also moves GOOLPC before GOANY in the menuconfig list. Finally, make pci_access_init return early if we detect OLPC hardware. There's no need to continue probing stuff, and pci_pcbios_init specifically trashes our settings (we didn't run into that before because PCI_GOANY wasn't supported). Signed-off-by: Andres Salomon Cc: Ingo Molnar Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index dcbec34..52e18e6 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1508,13 +1508,13 @@ config PCI_GOMMCONFIG config PCI_GODIRECT bool "Direct" -config PCI_GOANY - bool "Any" - config PCI_GOOLPC bool "OLPC" depends on OLPC +config PCI_GOANY + bool "Any" + endchoice config PCI_BIOS @@ -1531,9 +1531,8 @@ config PCI_MMCONFIG depends on X86_32 && PCI && ACPI && (PCI_GOMMCONFIG || PCI_GOANY) config PCI_OLPC - bool - depends on PCI && PCI_GOOLPC - default y + def_bool y + depends on PCI && OLPC && (PCI_GOOLPC || PCI_GOANY) config PCI_DOMAINS def_bool y diff --git a/arch/x86/pci/init.c b/arch/x86/pci/init.c index e70b9c5..b821f44 100644 --- a/arch/x86/pci/init.c +++ b/arch/x86/pci/init.c @@ -15,7 +15,8 @@ static __init int pci_access_init(void) pci_mmcfg_early_init(); #ifdef CONFIG_PCI_OLPC - pci_olpc_init(); + if (!pci_olpc_init()) + return 0; /* skip additional checks if it's an XO */ #endif #ifdef CONFIG_PCI_BIOS pci_pcbios_init(); diff --git a/arch/x86/pci/olpc.c b/arch/x86/pci/olpc.c index 5e76365..e11e9e8 100644 --- a/arch/x86/pci/olpc.c +++ b/arch/x86/pci/olpc.c @@ -302,12 +302,13 @@ static struct pci_raw_ops pci_olpc_conf = { .write = pci_olpc_write, }; -void __init pci_olpc_init(void) +int __init pci_olpc_init(void) { if (!machine_is_olpc() || olpc_has_vsa()) - return; + return -ENODEV; printk(KERN_INFO "PCI: Using configuration type OLPC\n"); raw_pci_ops = &pci_olpc_conf; is_lx = is_geode_lx(); + return 0; } diff --git a/arch/x86/pci/pci.h b/arch/x86/pci/pci.h index f3972b1..720c4c5 100644 --- a/arch/x86/pci/pci.h +++ b/arch/x86/pci/pci.h @@ -101,7 +101,7 @@ extern struct pci_raw_ops pci_direct_conf1; extern int pci_direct_probe(void); extern void pci_direct_init(int type); extern void pci_pcbios_init(void); -extern void pci_olpc_init(void); +extern int pci_olpc_init(void); /* pci-mmconfig.c */ -- cgit v0.10.2 From 66c23551b1b774e2be3c7bdf91c0ebf2c7a3519e Mon Sep 17 00:00:00 2001 From: Jarkko Nikula Date: Tue, 13 May 2008 13:26:03 +0300 Subject: ARM: OMAP: DMA: Don't mark channel active in omap_enable_channel_irq Channel should be marked active only when DMA is really started. Otherwise just omap_request_dma, omap_dma_link_lch and omap_dma_unlink_lch will cause incorrect dump_stack(). Signed-off-by: Jarkko Nikula Signed-off-by: Tony Lindgren diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index c00eda5..39c637b 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -501,8 +501,6 @@ static inline void omap_enable_channel_irq(int lch) /* Enable some nice interrupts. */ OMAP_DMA_CICR_REG(lch) = dma_chan[lch].enabled_irqs; - - dma_chan[lch].flags |= OMAP_DMA_ACTIVE; } static void omap_disable_channel_irq(int lch) -- cgit v0.10.2 From 9f67fd5db50566728996b0115a08c83d4f902cb3 Mon Sep 17 00:00:00 2001 From: Bertram Felgenhauer Date: Thu, 5 Jun 2008 15:31:22 -0700 Subject: x86/PCI: add workaround for bug in ASUS A7V600 BIOS (rev 1005) This BIOS claims the VIA 8237 south bridge to be compatible with VIA 586, which it is not. Without this patch, I get the following warning while booting, among others, | PCI: Using IRQ router VIA [1106/3227] at 0000:00:11.0 | ------------[ cut here ]------------ | WARNING: at arch/x86/pci/irq.c:265 pirq_via586_get+0x4a/0x60() | Modules linked in: | Pid: 1, comm: swapper Not tainted 2.6.26-rc4-00015-g1ec7d99 #1 | [] warn_on_slowpath+0x54/0x70 | [] ? vt_console_print+0x210/0x2b0 | [] ? vt_console_print+0x0/0x2b0 | [] ? __call_console_drivers+0x43/0x60 | [] ? _call_console_drivers+0x52/0x80 | [] ? release_console_sem+0x1c9/0x200 | [] ? raw_pci_read+0x41/0x70 | [] ? pci_read+0x2f/0x40 | [] pirq_via586_get+0x4a/0x60 | [] ? pirq_via586_get+0x0/0x60 | [] pcibios_lookup_irq+0x15d/0x430 | [] pcibios_irq_init+0x17a/0x3e0 | [] ? kernel_init+0x0/0x250 | [] kernel_init+0x73/0x250 | [] ? pcibios_irq_init+0x0/0x3e0 | [] ? schedule_tail+0x10/0x40 | [] ? ret_from_fork+0x6/0x1c | [] ? kernel_init+0x0/0x250 | [] ? kernel_init+0x0/0x250 | [] kernel_thread_helper+0x7/0x1c | ======================= | ---[ end trace 4eaa2a86a8e2da22 ]--- and IRQ trouble later, | irq 10: nobody cared (try booting with the "irqpoll" option) Now that's an VIA 8237 chip, so pirq_via586_get shouldn't be called at all; adding this workaround to via_router_probe() fixes the problem for me. Amazingly I have a 2.6.23.8 kernel that somehow works fine ... I'll never understand why. Signed-off-by: Bertram Felgenhauer Cc: Jesse Barnes Acked-by: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Jesse Barnes diff --git a/arch/x86/pci/irq.c b/arch/x86/pci/irq.c index 0908fca..ca8df9c 100644 --- a/arch/x86/pci/irq.c +++ b/arch/x86/pci/irq.c @@ -621,6 +621,13 @@ static __init int via_router_probe(struct irq_router *r, */ device = PCI_DEVICE_ID_VIA_8235; break; + case PCI_DEVICE_ID_VIA_8237: + /** + * Asus a7v600 bios wrongly reports 8237 + * as 586-compatible + */ + device = PCI_DEVICE_ID_VIA_8237; + break; } } -- cgit v0.10.2 From 203c80187eba037f2d6562e0d5847014746726dd Mon Sep 17 00:00:00 2001 From: Ben Collins Date: Thu, 5 Jun 2008 19:10:21 -0400 Subject: mmc: Fix crash in mmc_block on 64-bit Fairly simple. "dev_use" was being allocated as a zero length array because of bad math on 64-bit systems, causing a crash in find_first_zero_bit(). One-liner follows: Signed-off-by: Ben Collins Acked-by: Pierre Ossman Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 91ded3e..f9ad960 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -46,7 +46,7 @@ #define MMC_SHIFT 3 #define MMC_NUM_MINORS (256 >> MMC_SHIFT) -static unsigned long dev_use[MMC_NUM_MINORS/(8*sizeof(unsigned long))]; +static DECLARE_BITMAP(dev_use, MMC_NUM_MINORS); /* * There is one mmc_blk_data per slot. -- cgit v0.10.2 From 714c8a061092417d3ffb1d0f0522e3d092c730dd Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Fri, 6 Jun 2008 00:22:50 -0400 Subject: Input: pcspkr - remove negative dependency on snd-pcsp It should be possible to build pcspkr driver together with snd-pcsp, even though tehy can not be used together. Signed-off-by: Stas Sergeev Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig index 3ad8bd9..432699d 100644 --- a/drivers/input/misc/Kconfig +++ b/drivers/input/misc/Kconfig @@ -15,7 +15,6 @@ if INPUT_MISC config INPUT_PCSPKR tristate "PC Speaker support" depends on PCSPKR_PLATFORM - depends on SND_PCSP=n help Say Y here if you want the standard PC Speaker to be used for bells and whistles. -- cgit v0.10.2 From efd5184646d5d400fc538d093e9a0bec22a75551 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Fri, 6 Jun 2008 00:56:43 -0400 Subject: Input: i8042 - add Fujitsu-Siemens Amilo Pro V2030 to nomux table Fujitsu Siemens Amilo Pro V2030 needs nomux table entry, in addition to already existing entry for V2010 model (note that Fujitsu-Siemens changed the capitalization in the DMI data for product). Tested-by: Jiri Mleziva Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index 9aafa96..78eb784 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -193,6 +193,13 @@ static struct dmi_system_id __initdata i8042_dmi_nomux_table[] = { }, }, { + .ident = "Fujitsu-Siemens Amilo Pro 2030", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"), + DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"), + }, + }, + { /* * No data is coming from the touchscreen unless KBC * is in legacy mode. -- cgit v0.10.2 From 868e15dbd2940f9453b4399117686f408dc77299 Mon Sep 17 00:00:00 2001 From: Jaroslav Franek Date: Fri, 6 Jun 2008 11:04:19 +0200 Subject: sound: emu10k1 - fix system hang with Audigy2 ZS Notebook PCMCIA card When the Linux kernel is compiled with CONFIG_DEBUG_SHIRQ=y, the Soundblaster Audigy2 ZS Notebook PCMCIA card causes the system hang during boot (udev stage) or when the card is hot-plug. The CONFIG_DEBUG_SHIRQ flag is by default 'y' with all Fedora kernels since 2.6.23. The problem was reported as https://bugzilla.redhat.com/show_bug.cgi?id=326411 The issue was hunted down to the snd_emu10k1_create() routine: /* pseudo-code */ snd_emu10k1_create(...) { ... request_irq(... IRQF_SHARED ...) { register the irq handler #ifdef CONFIG_DEBUG_SHIRQ call the irq handler: snd_emu10k1_interrupt() { poll I/O port // <---- !! system hangs ... } #endif } ... snd_emu10k1_cardbus_init(...) { initialize I/O ports } ... } The early access to I/O port in the interrupt handler causes the freeze. Obviously it is necessary to init the I/O ports before accessing them. This patch moves the registration of the irq handler after the initialization of the I/O ports. Signed-off-by: Jaroslav Franek Acked-by: James Courtier-Dutton Signed-off-by: Takashi Iwai diff --git a/sound/pci/emu10k1/emu10k1_main.c b/sound/pci/emu10k1/emu10k1_main.c index abde5b9..548c9cc 100644 --- a/sound/pci/emu10k1/emu10k1_main.c +++ b/sound/pci/emu10k1/emu10k1_main.c @@ -1818,13 +1818,6 @@ int __devinit snd_emu10k1_create(struct snd_card *card, } emu->port = pci_resource_start(pci, 0); - if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED, - "EMU10K1", emu)) { - err = -EBUSY; - goto error; - } - emu->irq = pci->irq; - emu->max_cache_pages = max_cache_bytes >> PAGE_SHIFT; if (snd_dma_alloc_pages(SNDRV_DMA_TYPE_DEV, snd_dma_pci_data(pci), 32 * 1024, &emu->ptb_pages) < 0) { @@ -1887,6 +1880,14 @@ int __devinit snd_emu10k1_create(struct snd_card *card, emu->fx8010.etram_pages.area = NULL; emu->fx8010.etram_pages.bytes = 0; + /* irq handler must be registered after I/O ports are activated */ + if (request_irq(pci->irq, snd_emu10k1_interrupt, IRQF_SHARED, + "EMU10K1", emu)) { + err = -EBUSY; + goto error; + } + emu->irq = pci->irq; + /* * Init to 0x02109204 : * Clock accuracy = 0 (1000ppm) -- cgit v0.10.2 From bc01886352c277e310c07befadbb617c8f561b89 Mon Sep 17 00:00:00 2001 From: Chen Gong Date: Thu, 5 Jun 2008 21:50:04 +0800 Subject: [MTD] m25p80.c mutex unlock fix fix a mutex release bug in function m25p80_write. Signed-off-by: Chen Gong Signed-off-by: David Woodhouse diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 25efd33..b402269 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -346,8 +346,10 @@ static int m25p80_write(struct mtd_info *mtd, loff_t to, size_t len, mutex_lock(&flash->lock); /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) + if (wait_till_ready(flash)) { + mutex_unlock(&flash->lock); return 1; + } write_enable(flash); -- cgit v0.10.2 From f20d2752980c144c82649eb18746ef0c29f508dd Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Tue, 20 May 2008 13:13:50 +0200 Subject: KVM: ia64: fix zero extending for mmio ld1/2/4 emulation in KVM Only copy in the data actually requested by the instruction emulation and zero pad the destination register first. This avoids the problem where emulated mmio access got garbled data from ld2.acq instructions in the vga console driver. Signed-off-by: Jes Sorensen Acked-by: Xiantao Zhang Signed-off-by: Avi Kivity diff --git a/arch/ia64/kvm/mmio.c b/arch/ia64/kvm/mmio.c index 351bf70..7f1a858 100644 --- a/arch/ia64/kvm/mmio.c +++ b/arch/ia64/kvm/mmio.c @@ -159,7 +159,8 @@ static void mmio_access(struct kvm_vcpu *vcpu, u64 src_pa, u64 *dest, if (p->u.ioreq.state == STATE_IORESP_READY) { if (dir == IOREQ_READ) - *dest = p->u.ioreq.data; + /* it's necessary to ensure zero extending */ + *dest = p->u.ioreq.data & (~0UL >> (64-(s*8))); } else panic_vm(vcpu); out: -- cgit v0.10.2 From 33e3885de25148e00595c4dd808d6eb15db2edcf Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 21 May 2008 15:34:25 +0300 Subject: KVM: x86 emulator: fix hypercall return value on AMD The hypercall instructions on Intel and AMD are different. KVM allows the guest to choose one or the other (the default is Intel), and if the guest chooses incorrectly, KVM will patch it at runtime to select the correct instruction. This allows live migration between Intel and AMD machines. This patching occurs in the x86 emulator. The current code also executes the hypercall. Unfortunately, the tail end of the x86 emulator code also executes, overwriting the return value of the hypercall with the original contents of rax (which happens to be the hypercall number). Fix not by executing the hypercall in the emulator context; instead let the guest reissue the patched instruction and execute the hypercall via the normal path. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86_emulate.c b/arch/x86/kvm/x86_emulate.c index 8a96320..932f216 100644 --- a/arch/x86/kvm/x86_emulate.c +++ b/arch/x86/kvm/x86_emulate.c @@ -1727,7 +1727,8 @@ twobyte_insn: if (rc) goto done; - kvm_emulate_hypercall(ctxt->vcpu); + /* Let the processor re-execute the fixed hypercall */ + c->eip = ctxt->vcpu->arch.rip; /* Disable writeback. */ c->dst.type = OP_NONE; break; -- cgit v0.10.2 From b8cee18cc75d7b9dbe6c6526dfae9ab49e84fa95 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 21 May 2008 13:37:16 +0200 Subject: KVM: s390: use yield instead of schedule to implement diag 0x44 diag 0x44 is the common way on s390 to yield the cpu to the hypervisor. It is called by the guest in cpu_relax and in the spinlock code to yield to other guest cpus. This semantic is similar to yield. Lets replace the call to schedule with yield to make sure that current is really yielding. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/diag.c b/arch/s390/kvm/diag.c index f639a15..a0775e1 100644 --- a/arch/s390/kvm/diag.c +++ b/arch/s390/kvm/diag.c @@ -20,7 +20,7 @@ static int __diag_time_slice_end(struct kvm_vcpu *vcpu) VCPU_EVENT(vcpu, 5, "%s", "diag time slice end"); vcpu->stat.diagnose_44++; vcpu_put(vcpu); - schedule(); + yield(); vcpu_load(vcpu); return 0; } -- cgit v0.10.2 From 74b6b522ec83f9c44fc7743f2adcb24664aa8f45 Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 21 May 2008 13:37:29 +0200 Subject: KVM: s390: fix locking order problem in enable_sie There are potential locking problem in enable_sie. We take the task_lock and the mmap_sem. As exit_mm uses the same locks vice versa, this triggers a lockdep warning. The second problem is that dup_mm and mmput might sleep, so we must not hold the task_lock at that moment. The solution is to dup the mm unconditional and use the task_lock before and afterwards to check if we can use the new mm. dup_mm and mmput are called outside the task_lock, but we run update_mm while holding the task_lock, protection us against ptrace. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Acked-by: Martin Schwidefsky Signed-off-by: Avi Kivity diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 5c1aea9..3d98ba8 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -254,36 +254,46 @@ void disable_noexec(struct mm_struct *mm, struct task_struct *tsk) int s390_enable_sie(void) { struct task_struct *tsk = current; - struct mm_struct *mm; - int rc; + struct mm_struct *mm, *old_mm; - task_lock(tsk); - - rc = 0; + /* Do we have pgstes? if yes, we are done */ if (tsk->mm->context.pgstes) - goto unlock; + return 0; - rc = -EINVAL; + /* lets check if we are allowed to replace the mm */ + task_lock(tsk); if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 || - tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) - goto unlock; + tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) { + task_unlock(tsk); + return -EINVAL; + } + task_unlock(tsk); - tsk->mm->context.pgstes = 1; /* dirty little tricks .. */ + /* we copy the mm with pgstes enabled */ + tsk->mm->context.pgstes = 1; mm = dup_mm(tsk); tsk->mm->context.pgstes = 0; - - rc = -ENOMEM; if (!mm) - goto unlock; - mmput(tsk->mm); + return -ENOMEM; + + /* Now lets check again if somebody attached ptrace etc */ + task_lock(tsk); + if (!tsk->mm || atomic_read(&tsk->mm->mm_users) > 1 || + tsk->mm != tsk->active_mm || tsk->mm->ioctx_list) { + mmput(mm); + task_unlock(tsk); + return -EINVAL; + } + + /* ok, we are alone. No ptrace, no threads, etc. */ + old_mm = tsk->mm; tsk->mm = tsk->active_mm = mm; preempt_disable(); update_mm(mm, tsk); cpu_set(smp_processor_id(), mm->cpu_vm_mask); preempt_enable(); - rc = 0; -unlock: task_unlock(tsk); - return rc; + mmput(old_mm); + return 0; } EXPORT_SYMBOL_GPL(s390_enable_sie); -- cgit v0.10.2 From 71cde5879f10b639506bc0b9f29a89f58b42a17e Mon Sep 17 00:00:00 2001 From: Christian Borntraeger Date: Wed, 21 May 2008 13:37:34 +0200 Subject: KVM: s390: handle machine checks when guest is running The low-level interrupt handler on s390 checks for _TIF_WORK_INT and exits the guest context, if work is pending. TIF_WORK_INT is defined as_TIF_SIGPENDING | _TIF_NEED_RESCHED | _TIF_MCCK_PENDING. Currently the sie loop checks for signals and reschedule, but it does not check for machine checks. That means that we exit the guest context if a machine check is pending, but we do not handle the machine check. Signed-off-by: Christian Borntraeger CC: Heiko Carstens Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 0ac36a6..40e4f2d 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -423,6 +423,8 @@ int kvm_arch_vcpu_ioctl_set_mpstate(struct kvm_vcpu *vcpu, return -EINVAL; /* not implemented yet */ } +extern void s390_handle_mcck(void); + static void __vcpu_run(struct kvm_vcpu *vcpu) { memcpy(&vcpu->arch.sie_block->gg14, &vcpu->arch.guest_gprs[14], 16); @@ -430,6 +432,9 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) if (need_resched()) schedule(); + if (test_thread_flag(TIF_MCCK_PENDING)) + s390_handle_mcck(); + vcpu->arch.sie_block->icptcode = 0; local_irq_disable(); kvm_guest_enter(); diff --git a/drivers/s390/s390mach.c b/drivers/s390/s390mach.c index 5080f34..5bfbe76 100644 --- a/drivers/s390/s390mach.c +++ b/drivers/s390/s390mach.c @@ -207,6 +207,7 @@ s390_handle_mcck(void) do_exit(SIGSEGV); } } +EXPORT_SYMBOL_GPL(s390_handle_mcck); /* * returns 0 if all registers could be validated -- cgit v0.10.2 From 0ff318674503ce3787ef62d84f4d948db204b268 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 21 May 2008 13:37:37 +0200 Subject: KVM: s390: fix interrupt delivery The current code delivers pending interrupts before it checks for need_resched. On a busy host, this can lead to a longer interrupt latency if the interrupt is injected while the process is scheduled away. This patch moves delivering the interrupt _after_ schedule(), which makes more sense. Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index 40e4f2d..ded27c7 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -435,6 +435,8 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) if (test_thread_flag(TIF_MCCK_PENDING)) s390_handle_mcck(); + kvm_s390_deliver_pending_interrupts(vcpu); + vcpu->arch.sie_block->icptcode = 0; local_irq_disable(); kvm_guest_enter(); @@ -480,7 +482,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *kvm_run) might_sleep(); do { - kvm_s390_deliver_pending_interrupts(vcpu); __vcpu_run(vcpu); rc = kvm_handle_sie_intercept(vcpu); } while (!signal_pending(current) && !rc); -- cgit v0.10.2 From 1f0d0f094df9a570dfc26d5eb825986b7e165e1d Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 21 May 2008 13:37:40 +0200 Subject: KVM: s390: Send program check on access error If the guest accesses non-existing memory, the sie64a function returns -EFAULT. We must check the return value and send a program check to the guest if the sie instruction faulted, otherwise the guest will loop at the faulting code. Signed-off-by: Christian Borntraeger Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index ded27c7..6558b09 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -443,7 +443,10 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) local_irq_enable(); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); - sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs); + if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) { + VCPU_EVENT(vcpu, 3, "%s", "fault in sie instruction"); + kvm_s390_inject_program_int(vcpu, PGM_ADDRESSING); + } VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", vcpu->arch.sie_block->icptcode); local_irq_disable(); -- cgit v0.10.2 From e52b2af541bcb299212a63cfa3e3231618a415be Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Wed, 21 May 2008 13:37:44 +0200 Subject: KVM: s390: Fix race condition in kvm_s390_handle_wait The call to add_timer was issued before local_int.lock was taken and before timer_due was set to 0. If the timer expires before the lock is being taken, the timer function will set timer_due to 1 and exit before the vcpu falls asleep. Depending on other external events, the vcpu might sleep forever. This fix pulls setting timer_due to the beginning of the function before add_timer, which ensures correct behavior. Signed-off-by: Carsten Otte Signed-off-by: Avi Kivity diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index fcd1ed8..84a7fed 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -339,6 +339,11 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) if (kvm_cpu_has_interrupt(vcpu)) return 0; + __set_cpu_idle(vcpu); + spin_lock_bh(&vcpu->arch.local_int.lock); + vcpu->arch.local_int.timer_due = 0; + spin_unlock_bh(&vcpu->arch.local_int.lock); + if (psw_interrupts_disabled(vcpu)) { VCPU_EVENT(vcpu, 3, "%s", "disabled wait"); __unset_cpu_idle(vcpu); @@ -366,8 +371,6 @@ int kvm_s390_handle_wait(struct kvm_vcpu *vcpu) no_timer: spin_lock_bh(&vcpu->arch.local_int.float_int->lock); spin_lock_bh(&vcpu->arch.local_int.lock); - __set_cpu_idle(vcpu); - vcpu->arch.local_int.timer_due = 0; add_wait_queue(&vcpu->arch.local_int.wq, &wait); while (list_empty(&vcpu->arch.local_int.list) && list_empty(&vcpu->arch.local_int.float_int->list) && -- cgit v0.10.2 From 088af1543c611f4200658250b6a4467b7eb496a6 Mon Sep 17 00:00:00 2001 From: Joachim Fenkes Date: Fri, 6 Jun 2008 11:21:33 -0700 Subject: IB/ehca: Reject send WRs only for RESET, INIT and RTR state Signed-off-by: Joachim Fenkes Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ehca/ehca_reqs.c b/drivers/infiniband/hw/ehca/ehca_reqs.c index bbe0436..f093b00 100644 --- a/drivers/infiniband/hw/ehca/ehca_reqs.c +++ b/drivers/infiniband/hw/ehca/ehca_reqs.c @@ -421,8 +421,10 @@ int ehca_post_send(struct ib_qp *qp, int ret = 0; unsigned long flags; - if (unlikely(my_qp->state != IB_QPS_RTS)) { - ehca_err(qp->device, "QP not in RTS state qpn=%x", qp->qp_num); + /* Reject WR if QP is in RESET, INIT or RTR state */ + if (unlikely(my_qp->state < IB_QPS_RTS)) { + ehca_err(qp->device, "Invalid QP state qp_state=%d qpn=%x", + my_qp->state, qp->qp_num); return -EINVAL; } -- cgit v0.10.2 From ce263d70e509287ee761f9bba519342f57b121ca Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:51 -0500 Subject: KVM: ppc: Remove duplicate function This was left behind from some code movement. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/booke_guest.c b/arch/powerpc/kvm/booke_guest.c index 712d89a..9c8ad85 100644 --- a/arch/powerpc/kvm/booke_guest.c +++ b/arch/powerpc/kvm/booke_guest.c @@ -227,39 +227,6 @@ void kvmppc_check_and_deliver_interrupts(struct kvm_vcpu *vcpu) } } -static int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu) -{ - enum emulation_result er; - int r; - - er = kvmppc_emulate_instruction(run, vcpu); - switch (er) { - case EMULATE_DONE: - /* Future optimization: only reload non-volatiles if they were - * actually modified. */ - r = RESUME_GUEST_NV; - break; - case EMULATE_DO_MMIO: - run->exit_reason = KVM_EXIT_MMIO; - /* We must reload nonvolatiles because "update" load/store - * instructions modify register state. */ - /* Future optimization: only reload non-volatiles if they were - * actually modified. */ - r = RESUME_HOST_NV; - break; - case EMULATE_FAIL: - /* XXX Deliver Program interrupt to guest. */ - printk(KERN_EMERG "%s: emulation failed (%08x)\n", __func__, - vcpu->arch.last_inst); - r = RESUME_HOST; - break; - default: - BUG(); - } - - return r; -} - /** * kvmppc_handle_exit * diff --git a/include/asm-powerpc/kvm_ppc.h b/include/asm-powerpc/kvm_ppc.h index b35a7e3..5a21115 100644 --- a/include/asm-powerpc/kvm_ppc.h +++ b/include/asm-powerpc/kvm_ppc.h @@ -57,6 +57,7 @@ extern int kvmppc_handle_store(struct kvm_run *run, struct kvm_vcpu *vcpu, extern int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu); +extern int kvmppc_emulate_mmio(struct kvm_run *run, struct kvm_vcpu *vcpu); extern void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, u32 flags); -- cgit v0.10.2 From ac3cd34e4eb9e3dccaec8e586c073ba2660b322f Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:52 -0500 Subject: KVM: ppc: add lwzx/stwz emulation Somehow these load/store instructions got missed before, but weren't used by the guest so didn't break anything. Signed-off-by: Hollis Blanchard Signed-off-by: Christian Ehrhardt Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/emulate.c b/arch/powerpc/kvm/emulate.c index a03fe0c..0000974 100644 --- a/arch/powerpc/kvm/emulate.c +++ b/arch/powerpc/kvm/emulate.c @@ -246,6 +246,11 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) case 31: switch (get_xop(inst)) { + case 23: /* lwzx */ + rt = get_rt(inst); + emulated = kvmppc_handle_load(run, vcpu, rt, 4, 1); + break; + case 83: /* mfmsr */ rt = get_rt(inst); vcpu->arch.gpr[rt] = vcpu->arch.msr; @@ -267,6 +272,13 @@ int kvmppc_emulate_instruction(struct kvm_run *run, struct kvm_vcpu *vcpu) kvmppc_set_msr(vcpu, vcpu->arch.gpr[rs]); break; + case 151: /* stwx */ + rs = get_rs(inst); + emulated = kvmppc_handle_store(run, vcpu, + vcpu->arch.gpr[rs], + 4, 1); + break; + case 163: /* wrteei */ vcpu->arch.msr = (vcpu->arch.msr & ~MSR_EE) | (inst & MSR_EE); -- cgit v0.10.2 From 52435b7c7a29f7dd7947c8c204494d7f52f14813 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:53 -0500 Subject: KVM: ppc: Remove unmatched kunmap() call We're not calling kmap() now, so we shouldn't call kunmap() either. This has no practical effect in the non-highmem case, which is why it hasn't caused more obvious problems. Pointed out by Anthony Liguori. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index f5d7a5e..aa649c7 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -116,8 +116,6 @@ static void kvmppc_44x_shadow_release(struct kvm_vcpu *vcpu, struct tlbe *stlbe = &vcpu->arch.shadow_tlb[index]; struct page *page = vcpu->arch.shadow_pages[index]; - kunmap(vcpu->arch.shadow_pages[index]); - if (get_tlb_v(stlbe)) { if (kvmppc_44x_tlbe_is_writable(stlbe)) kvm_release_page_dirty(page); -- cgit v0.10.2 From 905fa4b9d6e2c9fd1c9ad84e3abe83021f498f53 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:54 -0500 Subject: KVM: ppc: Use a read lock around MMU operations, and release it on error gfn_to_page() and kvm_release_page_clean() are called from other contexts with mmap_sem locked only for reading. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index aa649c7..1c48d61 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -142,18 +142,19 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, stlbe = &vcpu->arch.shadow_tlb[victim]; /* Get reference to new page. */ - down_write(¤t->mm->mmap_sem); + down_read(¤t->mm->mmap_sem); new_page = gfn_to_page(vcpu->kvm, gfn); if (is_error_page(new_page)) { printk(KERN_ERR "Couldn't get guest page!\n"); kvm_release_page_clean(new_page); + up_read(¤t->mm->mmap_sem); return; } hpaddr = page_to_phys(new_page); /* Drop reference to old page. */ kvmppc_44x_shadow_release(vcpu, victim); - up_write(¤t->mm->mmap_sem); + up_read(¤t->mm->mmap_sem); vcpu->arch.shadow_pages[victim] = new_page; -- cgit v0.10.2 From 9dcb40e1aa5bfe7d6ffc729f3c2b6c8f1392d2d3 Mon Sep 17 00:00:00 2001 From: Hollis Blanchard Date: Wed, 21 May 2008 18:22:55 -0500 Subject: KVM: ppc: Report bad GFNs This code shouldn't be hit anyways, but when it is, it's useful to have a little more information about the failure. Signed-off-by: Hollis Blanchard Signed-off-by: Avi Kivity diff --git a/arch/powerpc/kvm/44x_tlb.c b/arch/powerpc/kvm/44x_tlb.c index 1c48d61..75dff7c 100644 --- a/arch/powerpc/kvm/44x_tlb.c +++ b/arch/powerpc/kvm/44x_tlb.c @@ -145,7 +145,7 @@ void kvmppc_mmu_map(struct kvm_vcpu *vcpu, u64 gvaddr, gfn_t gfn, u64 asid, down_read(¤t->mm->mmap_sem); new_page = gfn_to_page(vcpu->kvm, gfn); if (is_error_page(new_page)) { - printk(KERN_ERR "Couldn't get guest page!\n"); + printk(KERN_ERR "Couldn't get guest page for gfn %lx!\n", gfn); kvm_release_page_clean(new_page); up_read(¤t->mm->mmap_sem); return; -- cgit v0.10.2 From 27676a3e166b352928a8ef7b1c0e322f3c471a3e Mon Sep 17 00:00:00 2001 From: Ralph Campbell Date: Fri, 6 Jun 2008 11:23:29 -0700 Subject: IB/ipath: Fix SM trap forwarding SM/SMA traps received by the ipath driver should be forwarded to the SM if it is running on the host. The ib_ipath driver was incorrectly replying with "bad method." Signed-off-by: Ralph Campbell Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/ipath/ipath_mad.c b/drivers/infiniband/hw/ipath/ipath_mad.c index 1ff46ae..5f9315d 100644 --- a/drivers/infiniband/hw/ipath/ipath_mad.c +++ b/drivers/infiniband/hw/ipath/ipath_mad.c @@ -1492,6 +1492,10 @@ static int process_subn(struct ib_device *ibdev, int mad_flags, goto bail; } + case IB_MGMT_METHOD_TRAP: + case IB_MGMT_METHOD_REPORT: + case IB_MGMT_METHOD_REPORT_RESP: + case IB_MGMT_METHOD_TRAP_REPRESS: case IB_MGMT_METHOD_GET_RESP: /* * The ib_mad module will call us to process responses -- cgit v0.10.2 From 2f5997140f22f68f6390c49941150d3fa8a95cb7 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Tue, 27 May 2008 12:10:20 -0300 Subject: KVM: migrate PIT timer Migrate the PIT timer to the physical CPU which vcpu0 is scheduled on, similarly to what is done for the LAPIC timers, otherwise PIT interrupts will be delayed until an unrelated event causes an exit. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index 7c077a9..f2f5d26 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -200,7 +200,6 @@ int __pit_timer_fn(struct kvm_kpit_state *ps) atomic_inc(&pt->pending); smp_mb__after_atomic_inc(); - /* FIXME: handle case where the guest is in guest mode */ if (vcpu0 && waitqueue_active(&vcpu0->wq)) { vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE; wake_up_interruptible(&vcpu0->wq); @@ -237,6 +236,19 @@ static enum hrtimer_restart pit_timer_fn(struct hrtimer *data) return HRTIMER_NORESTART; } +void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu) +{ + struct kvm_pit *pit = vcpu->kvm->arch.vpit; + struct hrtimer *timer; + + if (vcpu->vcpu_id != 0 || !pit) + return; + + timer = &pit->pit_state.pit_timer.timer; + if (hrtimer_cancel(timer)) + hrtimer_start(timer, timer->expires, HRTIMER_MODE_ABS); +} + static void destroy_pit_timer(struct kvm_kpit_timer *pt) { pr_debug("pit: execute del timer!\n"); diff --git a/arch/x86/kvm/irq.c b/arch/x86/kvm/irq.c index ce1f583..76d736b 100644 --- a/arch/x86/kvm/irq.c +++ b/arch/x86/kvm/irq.c @@ -94,3 +94,9 @@ void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec) /* TODO: PIT, RTC etc. */ } EXPORT_SYMBOL_GPL(kvm_timer_intr_post); + +void __kvm_migrate_timers(struct kvm_vcpu *vcpu) +{ + __kvm_migrate_apic_timer(vcpu); + __kvm_migrate_pit_timer(vcpu); +} diff --git a/arch/x86/kvm/irq.h b/arch/x86/kvm/irq.h index 1802134..2a15be2 100644 --- a/arch/x86/kvm/irq.h +++ b/arch/x86/kvm/irq.h @@ -84,6 +84,8 @@ void kvm_timer_intr_post(struct kvm_vcpu *vcpu, int vec); void kvm_inject_pending_timer_irqs(struct kvm_vcpu *vcpu); void kvm_inject_apic_timer_irqs(struct kvm_vcpu *vcpu); void __kvm_migrate_apic_timer(struct kvm_vcpu *vcpu); +void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu); +void __kvm_migrate_timers(struct kvm_vcpu *vcpu); int pit_has_pending_timer(struct kvm_vcpu *vcpu); int apic_has_pending_timer(struct kvm_vcpu *vcpu); diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c index ab22615..6b0d5fa 100644 --- a/arch/x86/kvm/svm.c +++ b/arch/x86/kvm/svm.c @@ -688,7 +688,7 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu) delta = vcpu->arch.host_tsc - tsc_this; svm->vmcb->control.tsc_offset += delta; vcpu->cpu = cpu; - kvm_migrate_apic_timer(vcpu); + kvm_migrate_timers(vcpu); } for (i = 0; i < NR_HOST_SAVE_USER_MSRS; i++) diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index bfe4db1..96445f3 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -608,7 +608,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) if (vcpu->cpu != cpu) { vcpu_clear(vmx); - kvm_migrate_apic_timer(vcpu); + kvm_migrate_timers(vcpu); vpid_sync_vcpu_all(vmx); } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 21338bd..00acf13 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2758,7 +2758,7 @@ again: if (vcpu->requests) { if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests)) - __kvm_migrate_apic_timer(vcpu); + __kvm_migrate_timers(vcpu); if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS, &vcpu->requests)) { kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS; diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 3989789..092b1b2 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -297,7 +297,7 @@ static inline gpa_t gfn_to_gpa(gfn_t gfn) return (gpa_t)gfn << PAGE_SHIFT; } -static inline void kvm_migrate_apic_timer(struct kvm_vcpu *vcpu) +static inline void kvm_migrate_timers(struct kvm_vcpu *vcpu) { set_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests); } -- cgit v0.10.2 From b2c8daddcbe03a22402ecf943bb88302601c6835 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 5 Jun 2008 22:45:50 -0700 Subject: spi: fix refcount-related spidev oops-on-rmmod This addresses other oopsing paths in "spidev" by changing how it manages refcounting. It decouples the lifecycle of the per-device data from the class device (not just the spi device): - Use class_{create,destroy} not class_{register,unregister}. - Use device_{create,destroy} not device_{register,unregister}. - Free the per-device data only when TWO conditions are true: * Driver is unbound from underlying SPI device, and * Device is no longer open (new) Also, spi_{get,set}_drvdata not dev_{get,set}_drvdata for simpler code. Signed-off-by: David Brownell Sebastian Siewior Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 41620c0..799337f 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -67,11 +68,12 @@ static unsigned long minors[N_SPI_MINORS / BITS_PER_LONG]; | SPI_LSB_FIRST | SPI_3WIRE | SPI_LOOP) struct spidev_data { - struct device dev; + dev_t devt; spinlock_t spi_lock; struct spi_device *spi; struct list_head device_entry; + /* buffer is NULL unless this device is open (users > 0) */ struct mutex buf_lock; unsigned users; u8 *buffer; @@ -467,7 +469,7 @@ static int spidev_open(struct inode *inode, struct file *filp) mutex_lock(&device_list_lock); list_for_each_entry(spidev, &device_list, device_entry) { - if (spidev->dev.devt == inode->i_rdev) { + if (spidev->devt == inode->i_rdev) { status = 0; break; } @@ -500,10 +502,22 @@ static int spidev_release(struct inode *inode, struct file *filp) mutex_lock(&device_list_lock); spidev = filp->private_data; filp->private_data = NULL; + + /* last close? */ spidev->users--; if (!spidev->users) { + int dofree; + kfree(spidev->buffer); spidev->buffer = NULL; + + /* ... after we unbound from the underlying device? */ + spin_lock_irq(&spidev->spi_lock); + dofree = (spidev->spi == NULL); + spin_unlock_irq(&spidev->spi_lock); + + if (dofree) + kfree(spidev); } mutex_unlock(&device_list_lock); @@ -530,19 +544,7 @@ static struct file_operations spidev_fops = { * It also simplifies memory management. */ -static void spidev_classdev_release(struct device *dev) -{ - struct spidev_data *spidev; - - spidev = container_of(dev, struct spidev_data, dev); - kfree(spidev); -} - -static struct class spidev_class = { - .name = "spidev", - .owner = THIS_MODULE, - .dev_release = spidev_classdev_release, -}; +static struct class *spidev_class; /*-------------------------------------------------------------------------*/ @@ -570,20 +572,20 @@ static int spidev_probe(struct spi_device *spi) mutex_lock(&device_list_lock); minor = find_first_zero_bit(minors, N_SPI_MINORS); if (minor < N_SPI_MINORS) { - spidev->dev.parent = &spi->dev; - spidev->dev.class = &spidev_class; - spidev->dev.devt = MKDEV(SPIDEV_MAJOR, minor); - snprintf(spidev->dev.bus_id, sizeof spidev->dev.bus_id, + struct device *dev; + + spidev->devt = MKDEV(SPIDEV_MAJOR, minor); + dev = device_create(spidev_class, &spi->dev, spidev->devt, "spidev%d.%d", spi->master->bus_num, spi->chip_select); - status = device_register(&spidev->dev); + status = IS_ERR(dev) ? PTR_ERR(dev) : 0; } else { dev_dbg(&spi->dev, "no minor number available!\n"); status = -ENODEV; } if (status == 0) { set_bit(minor, minors); - dev_set_drvdata(&spi->dev, spidev); + spi_set_drvdata(spi, spidev); list_add(&spidev->device_entry, &device_list); } mutex_unlock(&device_list_lock); @@ -596,19 +598,21 @@ static int spidev_probe(struct spi_device *spi) static int spidev_remove(struct spi_device *spi) { - struct spidev_data *spidev = dev_get_drvdata(&spi->dev); + struct spidev_data *spidev = spi_get_drvdata(spi); /* make sure ops on existing fds can abort cleanly */ spin_lock_irq(&spidev->spi_lock); spidev->spi = NULL; + spi_set_drvdata(spi, NULL); spin_unlock_irq(&spidev->spi_lock); /* prevent new opens */ mutex_lock(&device_list_lock); list_del(&spidev->device_entry); - dev_set_drvdata(&spi->dev, NULL); - clear_bit(MINOR(spidev->dev.devt), minors); - device_unregister(&spidev->dev); + device_destroy(spidev_class, spidev->devt); + clear_bit(MINOR(spidev->devt), minors); + if (spidev->users == 0) + kfree(spidev); mutex_unlock(&device_list_lock); return 0; @@ -644,15 +648,15 @@ static int __init spidev_init(void) if (status < 0) return status; - status = class_register(&spidev_class); - if (status < 0) { + spidev_class = class_create(THIS_MODULE, "spidev"); + if (IS_ERR(spidev_class)) { unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); - return status; + return PTR_ERR(spidev_class); } status = spi_register_driver(&spidev_spi); if (status < 0) { - class_unregister(&spidev_class); + class_destroy(spidev_class); unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); } return status; @@ -662,7 +666,7 @@ module_init(spidev_init); static void __exit spidev_exit(void) { spi_unregister_driver(&spidev_spi); - class_unregister(&spidev_class); + class_destroy(spidev_class); unregister_chrdev(SPIDEV_MAJOR, spidev_spi.driver.name); } module_exit(spidev_exit); -- cgit v0.10.2 From e0a115e5aa554b93150a8dc1c3fe15467708abb2 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:52 -0700 Subject: md: fix prexor vs sync_request race During the initial array synchronization process there is a window between when a prexor operation is scheduled to a specific stripe and when it completes for a sync_request to be scheduled to the same stripe. When this happens the prexor completes and the stripe is unconditionally marked "insync", effectively canceling the sync_request for the stripe. Prior to 2.6.23 this was not a problem because the prexor operation was done under sh->lock. The effect in older kernels being that the prexor would still erroneously mark the stripe "insync", but sync_request would be held off and re-mark the stripe as "!in_sync". Change the write completion logic to not mark the stripe "in_sync" if a prexor was performed. The effect of the change is to sometimes not set STRIPE_INSYNC. The worst this can do is cause the resync to stall waiting for STRIPE_INSYNC to be set. If this were happening, then STRIPE_SYNCING would be set and handle_issuing_new_read_requests would cause all available blocks to eventually be read, at which point prexor would never be used on that stripe any more and STRIPE_INSYNC would eventually be set. echo repair > /sys/block/mdN/md/sync_action will correct arrays that may have lost this race. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 425958a..f0f0585 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2645,6 +2645,7 @@ static void handle_stripe5(struct stripe_head *sh) struct r5dev *dev; unsigned long pending = 0; mdk_rdev_t *blocked_rdev = NULL; + int prexor; memset(&s, 0, sizeof(s)); pr_debug("handling stripe %llu, state=%#lx cnt=%d, pd_idx=%d " @@ -2774,9 +2775,11 @@ static void handle_stripe5(struct stripe_head *sh) /* leave prexor set until postxor is done, allows us to distinguish * a rmw from a rcw during biodrain */ + prexor = 0; if (test_bit(STRIPE_OP_PREXOR, &sh->ops.complete) && test_bit(STRIPE_OP_POSTXOR, &sh->ops.complete)) { + prexor = 1; clear_bit(STRIPE_OP_PREXOR, &sh->ops.complete); clear_bit(STRIPE_OP_PREXOR, &sh->ops.ack); clear_bit(STRIPE_OP_PREXOR, &sh->ops.pending); @@ -2810,6 +2813,8 @@ static void handle_stripe5(struct stripe_head *sh) if (!test_and_set_bit( STRIPE_OP_IO, &sh->ops.pending)) sh->ops.count++; + if (prexor) + continue; if (!test_bit(R5_Insync, &dev->flags) || (i == sh->pd_idx && s.failed == 0)) set_bit(STRIPE_INSYNC, &sh->state); -- cgit v0.10.2 From a6d8113a986c66aeb379a26b6e0062488b3e59e1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:53 -0700 Subject: md: fix uninitialized use of mddev->recovery_wait If an array was created with --assume-clean we will oops when trying to set ->resync_max. Fix this by initializing ->recovery_wait in mddev_find. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/md.c b/drivers/md/md.c index 51c19f8..7cf512a 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -276,6 +276,7 @@ static mddev_t * mddev_find(dev_t unit) atomic_set(&new->active, 1); spin_lock_init(&new->write_lock); init_waitqueue_head(&new->sb_wait); + init_waitqueue_head(&new->recovery_wait); new->reshape_position = MaxSector; new->resync_max = MaxSector; new->level = LEVEL_NONE; @@ -5665,7 +5666,6 @@ void md_do_sync(mddev_t *mddev) window/2,(unsigned long long) max_sectors/2); atomic_set(&mddev->recovery_active, 0); - init_waitqueue_head(&mddev->recovery_wait); last_check = 0; if (j>2) { -- cgit v0.10.2 From c337869d95011495fa181536786e74aa2d7ff031 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:45:54 -0700 Subject: md: do not compute parity unless it is on a failed drive If a block is computed (rather than read) then a check/repair operation may be lead to believe that the data on disk is correct, when infact it isn't. So only compute blocks for failed devices. This issue has been around since at least 2.6.12, but has become harder to hit in recent kernels since most reads bypass the cache. echo repair > /sys/block/mdN/md/sync_action will set the parity blocks to the correct state. Cc: Signed-off-by: Dan Williams Signed-off-by: Neil Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index f0f0585..c37e256 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2002,6 +2002,7 @@ static int __handle_issuing_new_read_requests5(struct stripe_head *sh, * have quiesced. */ if ((s->uptodate == disks - 1) && + (s->failed && disk_idx == s->failed_num) && !test_bit(STRIPE_OP_CHECK, &sh->ops.pending)) { set_bit(STRIPE_OP_COMPUTE_BLK, &sh->ops.pending); set_bit(R5_Wantcompute, &dev->flags); @@ -2087,7 +2088,9 @@ static void handle_issuing_new_read_requests6(struct stripe_head *sh, /* we would like to get this block, possibly * by computing it, but we might not be able to */ - if (s->uptodate == disks-1) { + if ((s->uptodate == disks - 1) && + (s->failed && (i == r6s->failed_num[0] || + i == r6s->failed_num[1]))) { pr_debug("Computing stripe %llu block %d\n", (unsigned long long)sh->sector, i); compute_block_1(sh, i, 0); -- cgit v0.10.2 From 6a7d68e899b7f609708e7590784344f03640f774 Mon Sep 17 00:00:00 2001 From: Miao Xie Date: Thu, 5 Jun 2008 22:45:54 -0700 Subject: cpusets: fix and update Documentation Make the doc consistent with current cpusets implementation. Signed-off-by: Miao Xie Acked-by: Paul Jackson Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index fb7b361..d803c5c 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -199,7 +199,7 @@ using the sched_setaffinity, mbind and set_mempolicy system calls. The following rules apply to each cpuset: - Its CPUs and Memory Nodes must be a subset of its parents. - - It can only be marked exclusive if its parent is. + - It can't be marked exclusive unless its parent is. - If its cpu or memory is exclusive, they may not overlap any sibling. These rules, and the natural hierarchy of cpusets, enable efficient @@ -345,7 +345,7 @@ is modified to perform an inline check for this PF_SPREAD_PAGE task flag, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. -Similarly, setting 'memory_spread_cache' turns on the flag +Similarly, setting 'memory_spread_slab' turns on the flag PF_SPREAD_SLAB, and appropriately marked slab caches will allocate pages from the node returned by cpuset_mem_spread_node(). @@ -709,7 +709,10 @@ Now you want to do something with this cpuset. In this directory you can find several files: # ls -cpus cpu_exclusive mems mem_exclusive mem_hardwall tasks +cpu_exclusive memory_migrate mems tasks +cpus memory_pressure notify_on_release +mem_exclusive memory_spread_page sched_load_balance +mem_hardwall memory_spread_slab sched_relax_domain_level Reading them will give you information about the state of this cpuset: the CPUs and Memory Nodes it can use, the processes that are using -- cgit v0.10.2 From b8c141e8fd80fa64d80c6a74492053f25a28e0ea Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 Jun 2008 22:45:55 -0700 Subject: frv: don't offer BINFMT_FLAT Fix the following compile error: CC fs/binfmt_flat.o In file included from /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:36: /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/flat.h:14:22: error: asm/flat.h: No such file or directory /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'create_flat_tables': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:124: error: implicit declaration of function 'flat_stack_align' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:125: error: implicit declaration of function 'flat_argvp_envp_on_stack' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'calc_reloc': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:347: error: implicit declaration of function 'flat_reloc_valid' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c: In function 'load_flat_file': /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:479: error: implicit declaration of function 'flat_old_ram_flag' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:755: error: implicit declaration of function 'flat_set_persistent' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:757: error: implicit declaration of function 'flat_get_relocate_addr' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:765: error: implicit declaration of function 'flat_get_addr_from_rp' /home/bunk/linux/kernel-2.6/git/linux-2.6/fs/binfmt_flat.c:781: error: implicit declaration of function 'flat_put_addr_at_rp' Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Tested-by: David Howells Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/Kconfig.binfmt b/fs/Kconfig.binfmt index 55e8ee1..3263084 100644 --- a/fs/Kconfig.binfmt +++ b/fs/Kconfig.binfmt @@ -42,7 +42,7 @@ config BINFMT_ELF_FDPIC config BINFMT_FLAT bool "Kernel support for flat binaries" - depends on !MMU + depends on !MMU && (!FRV || BROKEN) help Support uClinux FLAT format binaries. -- cgit v0.10.2 From e2d4ecafd24d6eee4ae6bdbede0cfd0e78423a33 Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 5 Jun 2008 22:45:56 -0700 Subject: modedb: fix incorrect sync and vmode flags for CVT modes The temporary structure for calculated CVT mode is not initialized. Few fields have only bits or-ed or and-ed so they may be left in incorrect (random) state. Testing of the tridentfb seems like a good exercise for the fbdev layer. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index 4735621..d1bbef9 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -590,6 +590,7 @@ done: "", (margins) ? " with margins" : "", (interlace) ? " interlaced" : ""); + memset(&cvt_mode, 0, sizeof(cvt_mode)); cvt_mode.xres = xres; cvt_mode.yres = yres; cvt_mode.refresh = (refresh) ? refresh : 60; -- cgit v0.10.2 From 4647875819aa210115d926242aa18e034517cece Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 5 Jun 2008 22:45:57 -0700 Subject: hugetlb: fix lockdep error ============================================= [ INFO: possible recursive locking detected ] 2.6.26-rc4 #30 --------------------------------------------- heap-overflow/2250 is trying to acquire lock: (&mm->page_table_lock){--..}, at: [] .copy_hugetlb_page_range+0x108/0x280 but task is already holding lock: (&mm->page_table_lock){--..}, at: [] .copy_hugetlb_page_range+0xfc/0x280 other info that might help us debug this: 3 locks held by heap-overflow/2250: #0: (&mm->mmap_sem){----}, at: [] .dup_mm+0x134/0x410 #1: (&mm->mmap_sem/1){--..}, at: [] .dup_mm+0x144/0x410 #2: (&mm->page_table_lock){--..}, at: [] .copy_hugetlb_page_range+0xfc/0x280 stack backtrace: Call Trace: [c00000003b2774e0] [c000000000010ce4] .show_stack+0x74/0x1f0 (unreliable) [c00000003b2775a0] [c0000000003f10e0] .dump_stack+0x20/0x34 [c00000003b277620] [c0000000000889bc] .__lock_acquire+0xaac/0x1080 [c00000003b277740] [c000000000089000] .lock_acquire+0x70/0xb0 [c00000003b2777d0] [c0000000003ee15c] ._spin_lock+0x4c/0x80 [c00000003b277870] [c0000000000cf2e8] .copy_hugetlb_page_range+0x108/0x280 [c00000003b277950] [c0000000000bcaa8] .copy_page_range+0x558/0x790 [c00000003b277ac0] [c000000000050fe0] .dup_mm+0x2d0/0x410 [c00000003b277ba0] [c000000000051d24] .copy_process+0xb94/0x1020 [c00000003b277ca0] [c000000000052244] .do_fork+0x94/0x310 [c00000003b277db0] [c000000000011240] .sys_clone+0x60/0x80 [c00000003b277e30] [c0000000000078c4] .ppc_clone+0x8/0xc Fix is the same way that mm/memory.c copy_page_range does the lockdep annotation. Acked-by: KOSAKI Motohiro Acked-by: Adam Litke Acked-by: Nishanth Aravamudan Signed-off-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/hugetlb.c b/mm/hugetlb.c index bbf953e..ab17127 100644 --- a/mm/hugetlb.c +++ b/mm/hugetlb.c @@ -785,7 +785,7 @@ int copy_hugetlb_page_range(struct mm_struct *dst, struct mm_struct *src, continue; spin_lock(&dst->page_table_lock); - spin_lock(&src->page_table_lock); + spin_lock_nested(&src->page_table_lock, SINGLE_DEPTH_NESTING); if (!huge_pte_none(huge_ptep_get(src_pte))) { if (cow) huge_ptep_set_wrprotect(src, addr, src_pte); -- cgit v0.10.2 From 4feead71fa68a41db1d4f065c0f91fd67288877d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 5 Jun 2008 22:45:58 -0700 Subject: serial: fix driver_name conflicts Some drivers are using too generic "serial" name for driver_name, this might cause issues, like this: Freescale QUICC Engine UART device driver proc_dir_entry 'serial' already registered Call Trace: [cf82de50] [c0007f7c] show_stack+0x4c/0x1ac (unreliable) [cf82de90] [c00b03fc] proc_register+0xfc/0x1ac [cf82dec0] [c00b05c8] create_proc_entry+0x60/0xac [cf82dee0] [c00b23dc] proc_tty_register_driver+0x60/0x98 [cf82def0] [c016dbd8] tty_register_driver+0x1b4/0x228 [cf82df20] [c0184d70] uart_register_driver+0x144/0x194 [cf82df40] [c030a378] ucc_uart_init+0x2c/0x94 [cf82df50] [c02f21a0] kernel_init+0x98/0x27c [cf82dff0] [c000fa74] kernel_thread+0x44/0x60 ^^ The board is using ucc_uart.c and 8250.c, both registered as "serial". This patch fixes two drivers that are using "serial" for driver_name and not "ttyS" for dev_name. Drivers that are using "ttyS" for dev_name, will conflict anyway, so we don't bother with these. Signed-off-by: Anton Vorontsov Acked-by: Alan Cox Acked-By: Timur Tabi Acked-by: Maciej W. Rozycki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/sb1250-duart.c b/drivers/serial/sb1250-duart.c index 2d6c08b..f8e1447 100644 --- a/drivers/serial/sb1250-duart.c +++ b/drivers/serial/sb1250-duart.c @@ -924,7 +924,7 @@ console_initcall(sbd_serial_console_init); static struct uart_driver sbd_reg = { .owner = THIS_MODULE, - .driver_name = "serial", + .driver_name = "sb1250_duart", .dev_name = "duart", .major = TTY_MAJOR, .minor = SB1250_DUART_MINOR_BASE, diff --git a/drivers/serial/ucc_uart.c b/drivers/serial/ucc_uart.c index 01917c4..566a8b4 100644 --- a/drivers/serial/ucc_uart.c +++ b/drivers/serial/ucc_uart.c @@ -195,7 +195,7 @@ struct uart_qe_port { static struct uart_driver ucc_uart_driver = { .owner = THIS_MODULE, - .driver_name = "serial", + .driver_name = "ucc_uart", .dev_name = "ttyQE", .major = SERIAL_QE_MAJOR, .minor = SERIAL_QE_MINOR, -- cgit v0.10.2 From c45dcabd2626c56f8c1235df9db065f584f3ac82 Mon Sep 17 00:00:00 2001 From: Andy Whitcroft Date: Thu, 5 Jun 2008 22:46:01 -0700 Subject: update checkpatch.pl to version 0.19 This version is a bit of a whopper. This version brings a few new checks, improvements to a number of checks mostly through modifications to the way types are parsed, several fixes to quote/comment handling, as well as the usual slew of fixes for false positives. Of note: - return is not a function and is now reported, - preprocessor directive detection is loosened to match C99 standard, - we now intuit new type modifiers, and - comment handling is much improved Andy Whitcroft (18): Version: 0.19 fix up a couple of missing newlines in reports colon to parenthesis spacing varies on asm values: #include is a preprocessor statement quotes: fix single character quotes at line end add typedef exception for the non-pointer "function types" kerneldoc parameters must be on one line, relax line length types: word boundary is not always required improved #define bracketing reports uninitialized_var is an annotation not a function name possible types: add possible modifier handling possible types: fastcall is a type modifier types: unsigned is not a modifier on all types static/external initialisation to zero should allow modifiers checkpatch: fix recognition of preprocessor directives -- part 2 comments: fix inter-hunk comment tracking return is not a function do not report include/asm/foo.h use in include/linux/foo.h return is not a function -- tighten test [jengelh@computergmbh.de: fix recognition of preprocessor directives] Signed-off-by: Andy Whitcroft Cc: Jan Engelhardt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index b6bbbcd..6971bf0 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -9,7 +9,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.18'; +my $V = '0.19'; use Getopt::Long qw(:config no_auto_abbrev); @@ -115,6 +115,7 @@ our $Attribute = qr{ __kprobes| __(?:mem|cpu|dev|)(?:initdata|init) }x; +our $Modifier; our $Inline = qr{inline|__always_inline|noinline}; our $Member = qr{->$Ident|\.$Ident|\[[^]]*\]}; our $Lval = qr{$Ident(?:$Member)*}; @@ -144,17 +145,17 @@ our $UTF8 = qr { our @typeList = ( qr{void}, - qr{char}, - qr{short}, - qr{int}, - qr{long}, + qr{(?:unsigned\s+)?char}, + qr{(?:unsigned\s+)?short}, + qr{(?:unsigned\s+)?int}, + qr{(?:unsigned\s+)?long}, + qr{(?:unsigned\s+)?long\s+int}, + qr{(?:unsigned\s+)?long\s+long}, + qr{(?:unsigned\s+)?long\s+long\s+int}, qr{unsigned}, qr{float}, qr{double}, qr{bool}, - qr{long\s+int}, - qr{long\s+long}, - qr{long\s+long\s+int}, qr{(?:__)?(?:u|s|be|le)(?:8|16|32|64)}, qr{struct\s+$Ident}, qr{union\s+$Ident}, @@ -163,26 +164,29 @@ our @typeList = ( qr{${Ident}_handler}, qr{${Ident}_handler_fn}, ); +our @modifierList = ( + qr{fastcall}, +); sub build_types { + my $mods = "(?: \n" . join("|\n ", @modifierList) . "\n)"; my $all = "(?: \n" . join("|\n ", @typeList) . "\n)"; $NonptrType = qr{ - \b (?:const\s+)? - (?:unsigned\s+)? + (?:$mods\s+)? (?: - $all| - (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\) + (?:typeof|__typeof__)\s*\(\s*\**\s*$Ident\s*\)| + (?:${all}\b) ) (?:\s+$Sparse|\s+const)* - \b }x; $Type = qr{ - \b$NonptrType\b + $NonptrType (?:\s*\*+\s*const|\s*\*+|(?:\s*\[\s*\])+)? - (?:\s+$Inline|\s+$Sparse|\s+$Attribute)* + (?:\s+$Inline|\s+$Sparse|\s+$Attribute|\s+$mods)* }x; $Declare = qr{(?:$Storage\s+)?$Type}; + $Modifier = qr{(?:$Attribute|$Sparse|$mods)}; } build_types(); @@ -329,7 +333,7 @@ sub sanitise_line { $off++; next; } - if (substr($line, $off, 2) eq $sanitise_quote) { + if (substr($line, $off, 2) eq '*/') { $sanitise_quote = ''; substr($res, $off, 2, "$;$;"); $off++; @@ -366,14 +370,14 @@ sub sanitise_line { } # The pathname on a #include may be surrounded by '<' and '>'. - if ($res =~ /^.#\s*include\s+\<(.*)\>/) { + if ($res =~ /^.\s*\#\s*include\s+\<(.*)\>/) { my $clean = 'X' x length($1); $res =~ s@\<.*\>@<$clean>@; # The whole of a #error is a string. - } elsif ($res =~ /^.#\s*(?:error|warning)\s+(.*)\b/) { + } elsif ($res =~ /^.\s*\#\s*(?:error|warning)\s+(.*)\b/) { my $clean = 'X' x length($1); - $res =~ s@(#\s*(?:error|warning)\s+).*@$1$clean@; + $res =~ s@(\#\s*(?:error|warning)\s+).*@$1$clean@; } return $res; @@ -715,7 +719,7 @@ sub annotate_values { print "DECLARE($1)\n" if ($dbg_values > 1); $type = 'T'; - } elsif ($cur =~ /^(#\s*define\s*$Ident)(\(?)/o) { + } elsif ($cur =~ /^(\#\s*define\s*$Ident)(\(?)/o) { print "DEFINE($1,$2)\n" if ($dbg_values > 1); $av_preprocessor = 1; push(@av_paren_type, $type); @@ -724,12 +728,12 @@ sub annotate_values { } $type = 'E'; - } elsif ($cur =~ /^(#\s*undef\s*$Ident)/o) { + } elsif ($cur =~ /^(\#\s*(?:undef\s*$Ident|include\b))/o) { print "UNDEF($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; push(@av_paren_type, $type); - } elsif ($cur =~ /^(#\s*(?:ifdef|ifndef|if))/o) { + } elsif ($cur =~ /^(\#\s*(?:ifdef|ifndef|if))/o) { print "PRE_START($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; @@ -737,7 +741,7 @@ sub annotate_values { push(@av_paren_type, $type); $type = 'E'; - } elsif ($cur =~ /^(#\s*(?:else|elif))/o) { + } elsif ($cur =~ /^(\#\s*(?:else|elif))/o) { print "PRE_RESTART($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; @@ -745,7 +749,7 @@ sub annotate_values { $type = 'E'; - } elsif ($cur =~ /^(#\s*(?:endif))/o) { + } elsif ($cur =~ /^(\#\s*(?:endif))/o) { print "PRE_END($1)\n" if ($dbg_values > 1); $av_preprocessor = 1; @@ -837,14 +841,26 @@ sub annotate_values { sub possible { my ($possible, $line) = @_; - #print "CHECK<$possible>\n"; + print "CHECK<$possible> ($line)\n" if ($dbg_possible > 1); if ($possible !~ /^(?:$Storage|$Type|DEFINE_\S+)$/ && $possible ne 'goto' && $possible ne 'return' && - $possible ne 'struct' && $possible ne 'enum' && $possible ne 'case' && $possible ne 'else' && - $possible ne 'typedef') { - warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible); - push(@typeList, $possible); + $possible ne 'asm' && + $possible !~ /^(typedef|struct|enum)\b/) { + # Check for modifiers. + $possible =~ s/\s*$Storage\s*//g; + $possible =~ s/\s*$Sparse\s*//g; + if ($possible =~ /^\s*$/) { + + } elsif ($possible =~ /\s/) { + $possible =~ s/\s*$Type\s*//g; + warn "MODIFIER: $possible ($line)\n" if ($dbg_possible); + push(@modifierList, $possible); + + } else { + warn "POSSIBLE: $possible ($line)\n" if ($dbg_possible); + push(@typeList, $possible); + } build_types(); } } @@ -949,6 +965,7 @@ sub process { } else { $realcnt=1+1; } + $in_comment = 0; # Guestimate if this is a continuing comment. Run # the context looking for a comment "edge". If this @@ -1117,7 +1134,9 @@ sub process { ERROR("trailing whitespace\n" . $herevet); } #80 column limit - if ($line =~ /^\+/ && !($prevrawline=~/\/\*\*/) && $length > 80) { + if ($line =~ /^\+/ && $prevrawline !~ /\/\*\*/ && + $rawline !~ /^.\s*\*\s*\@$Ident\s/ && $length > 80) + { WARN("line over 80 characters\n" . $herecurr); } @@ -1159,18 +1178,20 @@ sub process { # Ignore functions being called } elsif ($s =~ /^.\s*$Ident\s*\(/s) { + # declarations always start with types + } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?((?:\s*$Ident)+)\b(?:\s+$Sparse)?\s*\**\s*(?:$Ident|\(\*[^\)]*\))\s*(?:;|=|,|\()/s) { + my $type = $1; + $type =~ s/\s+/ /g; + possible($type, "A:" . $s); + # definitions in global scope can only start with types } elsif ($s =~ /^.(?:$Storage\s+)?(?:$Inline\s+)?(?:const\s+)?($Ident)\b/s) { - possible($1, $s); - - # declarations always start with types - } elsif ($prev_values eq 'E' && $s =~ /^.\s*(?:$Storage\s+)?(?:const\s+)?($Ident)\b(:?\s+$Sparse)?\s*\**\s*$Ident\s*(?:;|=|,)/s) { - possible($1, $s); + possible($1, "B:" . $s); } # any (foo ... *) is a pointer cast, and foo is a type while ($s =~ /\(($Ident)(?:\s+$Sparse)*\s*\*+\s*\)/sg) { - possible($1, $s); + possible($1, "C:" . $s); } # Check for any sort of function declaration. @@ -1184,9 +1205,9 @@ sub process { $ctx =~ s/\)[^\)]*$//; for my $arg (split(/\s*,\s*/, $ctx)) { - if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/ || $arg =~ /^($Ident)$/) { + if ($arg =~ /^(?:const\s+)?($Ident)(?:\s+$Sparse)*\s*\**\s*(:?\b$Ident)?$/s || $arg =~ /^($Ident)$/s) { - possible($1, $s); + possible($1, "D:" . $s); } } } @@ -1221,7 +1242,7 @@ sub process { # if/while/etc brace do not go on next line, unless defining a do while loop, # or if that brace on the next line is for something else - if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.#/) { + if ($line =~ /(.*)\b((?:if|while|for|switch)\s*\(|do\b|else\b)/ && $line !~ /^.\s*\#/) { my $pre_ctx = "$1$2"; my ($level, @ctx) = ctx_statement_level($linenr, $realcnt, 0); @@ -1239,7 +1260,7 @@ sub process { if ($ctx !~ /{\s*/ && defined($lines[$ctx_ln -1]) && $lines[$ctx_ln - 1] =~ /^\+\s*{/) { ERROR("that open brace { should be on the previous line\n" . - "$here\n$ctx\n$lines[$ctx_ln - 1]"); + "$here\n$ctx\n$lines[$ctx_ln - 1]\n"); } if ($level == 0 && $pre_ctx !~ /}\s*while\s*\($/ && $ctx =~ /\)\s*\;\s*$/ && @@ -1248,7 +1269,7 @@ sub process { my ($nlength, $nindent) = line_stats($lines[$ctx_ln - 1]); if ($nindent > $indent) { WARN("trailing semicolon indicates no statements, indent implies otherwise\n" . - "$here\n$ctx\n$lines[$ctx_ln - 1]"); + "$here\n$ctx\n$lines[$ctx_ln - 1]\n"); } } } @@ -1284,7 +1305,7 @@ sub process { # # check for malformed paths in #include statements (uses RAW line) - if ($rawline =~ m{^.#\s*include\s+[<"](.*)[">]}) { + if ($rawline =~ m{^.\s*\#\s*include\s+[<"](.*)[">]}) { my $path = $1; if ($path =~ m{//}) { ERROR("malformed #include filename\n" . @@ -1316,7 +1337,7 @@ sub process { } # check for external initialisers. - if ($line =~ /^.$Type\s*$Ident\s*=\s*(0|NULL|false)\s*;/) { + if ($line =~ /^.$Type\s*$Ident\s*(?:\s+$Modifier)*\s*=\s*(0|NULL|false)\s*;/) { ERROR("do not initialise externals to 0 or NULL\n" . $herecurr); } @@ -1330,6 +1351,7 @@ sub process { # make sense. if ($line =~ /\btypedef\s/ && $line !~ /\btypedef\s+$Type\s+\(\s*\*?$Ident\s*\)\s*\(/ && + $line !~ /\btypedef\s+$Type\s+$Ident\s*\(/ && $line !~ /\b__bitwise(?:__|)\b/) { WARN("do not add new typedefs\n" . $herecurr); } @@ -1388,8 +1410,8 @@ sub process { # function brace can't be on same line, except for #defines of do while, # or if closed on same line - if (($line=~/$Type\s*[A-Za-z\d_]+\(.*\).*\s{/) and - !($line=~/\#define.*do\s{/) and !($line=~/}/)) { + if (($line=~/$Type\s*$Ident\(.*\).*\s{/) and + !($line=~/\#\s*define.*do\s{/) and !($line=~/}/)) { ERROR("open brace '{' following function declarations go on the next line\n" . $herecurr); } @@ -1416,10 +1438,10 @@ sub process { # cpp #define statements have non-optional spaces, ie # if there is a space between the name and the open # parenthesis it is simply not a parameter group. - } elsif ($ctx_before =~ /^.\#\s*define\s*$/) { + } elsif ($ctx_before =~ /^.\s*\#\s*define\s*$/) { # cpp #elif statement condition may start with a ( - } elsif ($ctx =~ /^.\#\s*elif\s*$/) { + } elsif ($ctx =~ /^.\s*\#\s*elif\s*$/) { # If this whole things ends with a type its most # likely a typedef for a function. @@ -1625,13 +1647,14 @@ sub process { ERROR("space prohibited before that close square bracket ']'\n" . $herecurr); } -# check spacing on paretheses +# check spacing on parentheses if ($line =~ /\(\s/ && $line !~ /\(\s*(?:\\)?$/ && $line !~ /for\s*\(\s+;/) { ERROR("space prohibited after that open parenthesis '('\n" . $herecurr); } if ($line =~ /(\s+)\)/ && $line !~ /^.\s*\)/ && - $line !~ /for\s*\(.*;\s+\)/) { + $line !~ /for\s*\(.*;\s+\)/ && + $line !~ /:\s+\)/) { ERROR("space prohibited before that close parenthesis ')'\n" . $herecurr); } @@ -1641,6 +1664,23 @@ sub process { WARN("labels should not be indented\n" . $herecurr); } +# Return is not a function. + if (defined($stat) && $stat =~ /^.\s*return(\s*)(\(.*);/s) { + my $spacing = $1; + my $value = $2; + + # Flatten any parentheses and braces + while ($value =~ s/\([^\(\)]*\)/1/) { + } + + if ($value =~ /^(?:$Ident|-?$Constant)$/) { + ERROR("return is not a function, parentheses are not required\n" . $herecurr); + + } elsif ($spacing !~ /\s+/) { + ERROR("space required before the open parenthesis '('\n" . $herecurr); + } + } + # Need a space before open parenthesis after if, while etc if ($line=~/\b(if|while|for|switch)\(/) { ERROR("space required before the open parenthesis '('\n" . $herecurr); @@ -1660,7 +1700,7 @@ sub process { $s =~ s/\n.*//g; $s =~ s/$;//g; # Remove any comments if (length($c) && $s !~ /^\s*({|;|)\s*\\*\s*$/ && - $c !~ /^.\#\s*if/) + $c !~ /^.\s*\#\s*if/) { ERROR("trailing statements should be on next line\n" . $herecurr); } @@ -1719,14 +1759,16 @@ sub process { # } #no spaces allowed after \ in define - if ($line=~/\#define.*\\\s$/) { + if ($line=~/\#\s*define.*\\\s$/) { WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr); } #warn if is #included and is available (uses RAW line) - if ($tree && $rawline =~ m{^.\#\s*include\s*\}) { - my $checkfile = "$root/include/linux/$1.h"; - if (-f $checkfile && $1 ne 'irq') { + if ($tree && $rawline =~ m{^.\s*\#\s*include\s*\}) { + my $checkfile = "include/linux/$1.h"; + if (-f "$root/$checkfile" && $realfile ne $checkfile && + $1 ne 'irq') + { WARN("Use #include instead of \n" . $herecurr); } @@ -1735,45 +1777,87 @@ sub process { # multi-statement macros should be enclosed in a do while loop, grab the # first statement and ensure its the whole macro if its not enclosed # in a known good container - if ($prevline =~ /\#define.*\\/ && - $prevline !~/(?:do\s+{|\(\{|\{)/ && - $line !~ /(?:do\s+{|\(\{|\{)/ && - $line !~ /^.\s*$Declare\s/) { - # Grab the first statement, if that is the entire macro - # its ok. This may start either on the #define line - # or the one below. + if ($line =~ /^.\s*\#\s*define\s*$Ident(\()?/) { my $ln = $linenr; my $cnt = $realcnt; - my $off = 0; + my ($off, $dstat, $dcond, $rest); + my $ctx = ''; - # If the macro starts on the define line start - # grabbing the statement after the identifier - $prevline =~ m{^(.#\s*define\s*$Ident(?:\([^\)]*\))?\s*)(.*)\\\s*$}; - ##print "1<$1> 2<$2>\n"; - if (defined $2 && $2 ne '') { - $off = length($1); - $ln--; - $cnt++; - while ($lines[$ln - 1] =~ /^-/) { - $ln--; - $cnt++; - } + my $args = defined($1); + + # Find the end of the macro and limit our statement + # search to that. + while ($cnt > 0 && defined $lines[$ln - 1] && + $lines[$ln - 1] =~ /^(?:-|..*\\$)/) + { + $ctx .= $rawlines[$ln - 1] . "\n"; + $ln++; + $cnt--; + } + $ctx .= $rawlines[$ln - 1]; + + ($dstat, $dcond, $ln, $cnt, $off) = + ctx_statement_block($linenr, $ln - $linenr + 1, 0); + #print "dstat<$dstat> dcond<$dcond> cnt<$cnt> off<$off>\n"; + #print "LINE<$lines[$ln]> len<" . length($lines[$ln]) . "\n"; + + # Extract the remainder of the define (if any) and + # rip off surrounding spaces, and trailing \'s. + $rest = ''; + if (defined $lines[$ln - 1] && + $off > length($lines[$ln - 1])) + { + $ln++; + $cnt--; + $off = 0; + } + while ($cnt > 0) { + $rest .= substr($lines[$ln - 1], $off) . "\n"; + $ln++; + $cnt--; + $off = 0; + } + $rest =~ s/\\\n.//g; + $rest =~ s/^\s*//s; + $rest =~ s/\s*$//s; + + # Clean up the original statement. + if ($args) { + substr($dstat, 0, length($dcond), ''); + } else { + $dstat =~ s/^.\s*\#\s*define\s+$Ident\s*//; } - my @ctx = ctx_statement($ln, $cnt, $off); - my $ctx_ln = $ln + $#ctx + 1; - my $ctx = join("\n", @ctx); + $dstat =~ s/\\\n.//g; + $dstat =~ s/^\s*//s; + $dstat =~ s/\s*$//s; - # Pull in any empty extension lines. - while ($ctx =~ /\\$/ && - $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) { - $ctx .= $lines[$ctx_ln - 1]; - $ctx_ln++; + # Flatten any parentheses and braces + while ($dstat =~ s/\([^\(\)]*\)/1/) { + } + while ($dstat =~ s/\{[^\{\}]*\}/1/) { } - if ($ctx =~ /\\$/) { - if ($ctx =~ /;/) { + my $exceptions = qr{ + $Declare| + module_param_named| + MODULE_PARAM_DESC| + DECLARE_PER_CPU| + DEFINE_PER_CPU| + __typeof__\( + }x; + if ($rest ne '') { + if ($rest !~ /while\s*\(/ && + $dstat !~ /$exceptions/) + { ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n"); - } else { + } + + } elsif ($ctx !~ /;/) { + if ($dstat ne '' && + $dstat !~ /^(?:$Ident|-?$Constant)$/ && + $dstat !~ /$exceptions/ && + $dstat =~ /$Operators/) + { ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n"); } } @@ -1884,7 +1968,7 @@ sub process { # don't include deprecated include files (uses RAW line) for my $inc (@dep_includes) { - if ($rawline =~ m@\#\s*include\s*\<$inc>@) { + if ($rawline =~ m@^.\s*\#\s*include\s*\<$inc>@) { ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr); } } @@ -1908,7 +1992,7 @@ sub process { } # warn about #if 0 - if ($line =~ /^.#\s*if\s+0\b/) { + if ($line =~ /^.\s*\#\s*if\s+0\b/) { CHK("if this code is redundant consider removing it\n" . $herecurr); } @@ -1920,23 +2004,16 @@ sub process { WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev); } } -# check for needless usb_free_urb() checks - if ($prevline =~ /\bif\s*\(([^\)]*)\)/) { - my $expr = $1; - if ($line =~ /\busb_free_urb\(\Q$expr\E\);/) { - WARN("usb_free_urb(NULL) is safe this check is probabally not required\n" . $hereprev); - } - } # warn about #ifdefs in C files -# if ($line =~ /^.#\s*if(|n)def/ && ($realfile =~ /\.c$/)) { +# if ($line =~ /^.\s*\#\s*if(|n)def/ && ($realfile =~ /\.c$/)) { # print "#ifdef in C files should be avoided\n"; # print "$herecurr"; # $clean = 0; # } # warn about spacing in #ifdefs - if ($line =~ /^.#\s*(ifdef|ifndef|elif)\s\s+/) { + if ($line =~ /^.\s*\#\s*(ifdef|ifndef|elif)\s\s+/) { ERROR("exactly one space required after that #$1\n" . $herecurr); } @@ -1955,7 +2032,7 @@ sub process { } } # check of hardware specific defines - if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) { + if ($line =~ m@^.\s*\#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) { CHK("architecture specific defines should be avoided\n" . $herecurr); } @@ -1973,15 +2050,18 @@ sub process { # check for new externs in .c files. if ($realfile =~ /\.c$/ && defined $stat && - $stat =~ /^.\s*(?:extern\s+)?$Type\s+$Ident(\s*)\(/s) + $stat =~ /^.\s*(?:extern\s+)?$Type\s+($Ident)(\s*)\(/s) { - my $paren_space = $1; + my $function_name = $1; + my $paren_space = $2; my $s = $stat; if (defined $cond) { substr($s, 0, length($cond), ''); } - if ($s =~ /^\s*;/) { + if ($s =~ /^\s*;/ && + $function_name ne 'uninitialized_var') + { WARN("externs should be avoided in .c files\n" . $herecurr); } @@ -2030,8 +2110,8 @@ sub process { # use of NR_CPUS is usually wrong # ignore definitions of NR_CPUS and usage to define arrays as likely right if ($line =~ /\bNR_CPUS\b/ && - $line !~ /^.#\s*if\b.*\bNR_CPUS\b/ && - $line !~ /^.#\s*define\b.*\bNR_CPUS\b/ && + $line !~ /^.\s*\s*#\s*if\b.*\bNR_CPUS\b/ && + $line !~ /^.\s*\s*#\s*define\b.*\bNR_CPUS\b/ && $line !~ /^.\s*$Declare\s.*\[[^\]]*NR_CPUS[^\]]*\]/ && $line !~ /\[[^\]]*\.\.\.[^\]]*NR_CPUS[^\]]*\]/ && $line !~ /\[[^\]]*NR_CPUS[^\]]*\.\.\.[^\]]*\]/) -- cgit v0.10.2 From d3e49afbb66109613c3474f2273f5830ac2dcb09 Mon Sep 17 00:00:00 2001 From: Michael Halcrow Date: Thu, 5 Jun 2008 22:46:02 -0700 Subject: eCryptfs: remove unnecessary page decrypt call The page decrypt calls in ecryptfs_write() are both pointless and buggy. Pointless because ecryptfs_get_locked_page() has already brought the page up to date, and buggy because prior mmap writes will just be blown away by the decrypt call. This patch also removes the declaration of a now-nonexistent function ecryptfs_write_zeros(). Thanks to Eric Sandeen and David Kleikamp for helping to track this down. Eric said: fsx w/ mmap dies quickly ( < 100 ops) without this, and survives nicely (to millions of ops+) with it in place. Signed-off-by: Michael Halcrow Cc: Eric Sandeen Cc: Dave Kleikamp Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ecryptfs/ecryptfs_kernel.h b/fs/ecryptfs/ecryptfs_kernel.h index 951ee33..c15c257 100644 --- a/fs/ecryptfs/ecryptfs_kernel.h +++ b/fs/ecryptfs/ecryptfs_kernel.h @@ -660,8 +660,6 @@ int ecryptfs_get_tfm_and_mutex_for_cipher_name(struct crypto_blkcipher **tfm, int ecryptfs_keyring_auth_tok_for_sig(struct key **auth_tok_key, struct ecryptfs_auth_tok **auth_tok, char *sig); -int ecryptfs_write_zeros(struct file *file, pgoff_t index, int start, - int num_zeros); int ecryptfs_write_lower(struct inode *ecryptfs_inode, char *data, loff_t offset, size_t size); int ecryptfs_write_lower_page_segment(struct inode *ecryptfs_inode, diff --git a/fs/ecryptfs/read_write.c b/fs/ecryptfs/read_write.c index ebf5515..75c2ea9 100644 --- a/fs/ecryptfs/read_write.c +++ b/fs/ecryptfs/read_write.c @@ -157,20 +157,6 @@ int ecryptfs_write(struct file *ecryptfs_file, char *data, loff_t offset, ecryptfs_page_idx, rc); goto out; } - if (start_offset_in_page) { - /* Read in the page from the lower - * into the eCryptfs inode page cache, - * decrypting */ - rc = ecryptfs_decrypt_page(ecryptfs_page); - if (rc) { - printk(KERN_ERR "%s: Error decrypting " - "page; rc = [%d]\n", - __func__, rc); - ClearPageUptodate(ecryptfs_page); - page_cache_release(ecryptfs_page); - goto out; - } - } ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0); /* @@ -349,14 +335,6 @@ int ecryptfs_read(char *data, loff_t offset, size_t size, ecryptfs_page_idx, rc); goto out; } - rc = ecryptfs_decrypt_page(ecryptfs_page); - if (rc) { - printk(KERN_ERR "%s: Error decrypting " - "page; rc = [%d]\n", __func__, rc); - ClearPageUptodate(ecryptfs_page); - page_cache_release(ecryptfs_page); - goto out; - } ecryptfs_page_virt = kmap_atomic(ecryptfs_page, KM_USER0); memcpy((data + data_offset), ((char *)ecryptfs_page_virt + start_offset_in_page), -- cgit v0.10.2 From f6266e34713dc286b52623d8a4ff846973c0bcce Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Thu, 5 Jun 2008 22:46:03 -0700 Subject: edd: fix incorrect return of 1 from module_init Signed-off-by: Alexey Dobriyan Cc: Matt Domsch Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/firmware/edd.c b/drivers/firmware/edd.c index 7440119..9e4f59d 100644 --- a/drivers/firmware/edd.c +++ b/drivers/firmware/edd.c @@ -753,7 +753,7 @@ edd_init(void) if (!edd_num_devices()) { printk(KERN_INFO "EDD information not available.\n"); - return 1; + return -ENODEV; } edd_kset = kset_create_and_add("edd", NULL, firmware_kobj); -- cgit v0.10.2 From 33dda515a1995dfb3b6b57d7ace9b3ee9d449c11 Mon Sep 17 00:00:00 2001 From: "Roland.Kletzing" Date: Thu, 5 Jun 2008 22:46:04 -0700 Subject: drivers/char/ip2: fix Kconfig after ip2/ip2main merge As commit 6089093e588ee3f6aed99d08b1cf5ea37c52cf97 ("ip2: fix crashes on load/unload") fixed the ip2 crashes on load/unload by making ip2/ip2main one module (ip2), Kconfig shouldn't mention a now non-existing module. Signed-off-by: Roland.Kletzing Acked-by: Alan Cox Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index 595a925..d307bf2 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -118,8 +118,8 @@ config COMPUTONE order to become a dial-in server. If you have a card like that, say Y here and read . - To compile this driver as modules, choose M here: the - modules will be called ip2 and ip2main. + To compile this driver as module, choose M here: the + module will be called ip2. config ROCKETPORT tristate "Comtrol RocketPort support" -- cgit v0.10.2 From a5b4592cf77b973c29e7c9695873a26052b58951 Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Thu, 5 Jun 2008 22:46:05 -0700 Subject: brk: make sys_brk() honor COMPAT_BRK when computing lower bound Fix a regression introduced by commit 4cc6028d4040f95cdb590a87db478b42b8be0508 Author: Jiri Kosina Date: Wed Feb 6 22:39:44 2008 +0100 brk: check the lower bound properly The check in sys_brk() on minimum value the brk might have must take CONFIG_COMPAT_BRK setting into account. When this option is turned on (i.e. we support ancient legacy binaries, e.g. libc5-linked stuff), the lower bound on brk value is mm->end_code, otherwise the brk start is allowed to be arbitrarily shifted. Signed-off-by: Jiri Kosina Tested-by: Geert Uytterhoeven Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/mmap.c b/mm/mmap.c index 669499e..3354fdd 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -245,10 +245,16 @@ asmlinkage unsigned long sys_brk(unsigned long brk) unsigned long rlim, retval; unsigned long newbrk, oldbrk; struct mm_struct *mm = current->mm; + unsigned long min_brk; down_write(&mm->mmap_sem); - if (brk < mm->start_brk) +#ifdef CONFIG_COMPAT_BRK + min_brk = mm->end_code; +#else + min_brk = mm->start_brk; +#endif + if (brk < min_brk) goto out; /* -- cgit v0.10.2 From 6f09bdfc717a0e1a89a029001484d5a195faab64 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 5 Jun 2008 22:46:07 -0700 Subject: m68k: enable CONFIG_COMPAT_BRK by default As some m68k machines have plenty of libc5 binaries in active use, enable CONFIG_COMPAT_BRK by default. Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig index dca50da..8e2a0f5 100644 --- a/arch/m68k/configs/amiga_defconfig +++ b/arch/m68k/configs/amiga_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:41 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig index c3cd5b7..e2d511e 100644 --- a/arch/m68k/configs/apollo_defconfig +++ b/arch/m68k/configs/apollo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:42 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig index 073ae4b..6e20d65 100644 --- a/arch/m68k/configs/atari_defconfig +++ b/arch/m68k/configs/atari_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:43 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig index 0789ede..a0a9b30 100644 --- a/arch/m68k/configs/bvme6000_defconfig +++ b/arch/m68k/configs/bvme6000_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:45 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig index 3e140bf..6778041 100644 --- a/arch/m68k/configs/hp300_defconfig +++ b/arch/m68k/configs/hp300_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:46 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig index ba3a917..7cd3757 100644 --- a/arch/m68k/configs/mac_defconfig +++ b/arch/m68k/configs/mac_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:47 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig index 4d23f99..0747fa3 100644 --- a/arch/m68k/configs/multi_defconfig +++ b/arch/m68k/configs/multi_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:42:31 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig index 188847f..e7a8246 100644 --- a/arch/m68k/configs/mvme147_defconfig +++ b/arch/m68k/configs/mvme147_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:49 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig index 983e53d..ab536eb 100644 --- a/arch/m68k/configs/mvme16x_defconfig +++ b/arch/m68k/configs/mvme16x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:50 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig index 7707f3f..e05be68 100644 --- a/arch/m68k/configs/q40_defconfig +++ b/arch/m68k/configs/q40_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:51 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig index a765f6f..296340d 100644 --- a/arch/m68k/configs/sun3_defconfig +++ b/arch/m68k/configs/sun3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:53 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig index 4315139..8d3a416 100644 --- a/arch/m68k/configs/sun3x_defconfig +++ b/arch/m68k/configs/sun3x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc2 -# Sun May 18 14:44:54 2008 +# Linux kernel version: 2.6.26-rc4 +# Wed May 28 22:47:35 2008 # CONFIG_M68K=y CONFIG_MMU=y @@ -59,7 +59,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -# CONFIG_COMPAT_BRK is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y -- cgit v0.10.2 From 6cfd53fc03670c7a544a56d441eb1a6cc800d72b Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 5 Jun 2008 22:46:08 -0700 Subject: nommu: fix kobjsize() for SLOB and SLUB kobjsize() has been abusing page->index as a method for sorting out compound order, which blows up both for page cache pages, and SLOB's reuse of the index in struct slob_page. Presently we are not able to accurately size arbitrary pointers that don't come from kmalloc(), so the best we can do is sort out the compound order from the head page if it's a compound page, or default to 0-order if it's impossible to ksize() the object. Obviously this leaves quite a bit to be desired in terms of object sizing accuracy, but the behaviour is unchanged over the existing implementation, while fixing the page->index oopses originally reported here: http://marc.info/?l=linux-mm&m=121127773325245&w=2 Accuracy could also be improved by having SLUB and SLOB both set PG_slab on ksizeable pages, rather than just handling the __GFP_COMP cases irregardless of the PG_slab setting, as made possibly with Pekka's patches: http://marc.info/?l=linux-kernel&m=121139439900534&w=2 http://marc.info/?l=linux-kernel&m=121139440000537&w=2 http://marc.info/?l=linux-kernel&m=121139440000540&w=2 This is primarily a bugfix for nommu systems for 2.6.26, with the aim being to gradually kill off kobjsize() and its particular brand of object abuse entirely. Reviewed-by: Pekka Enberg Signed-off-by: Paul Mundt Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/nommu.c b/mm/nommu.c index dca93fc..3abd084 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -104,21 +104,43 @@ EXPORT_SYMBOL(vmtruncate); unsigned int kobjsize(const void *objp) { struct page *page; + int order = 0; /* * If the object we have should not have ksize performed on it, * return size of 0 */ - if (!objp || (unsigned long)objp >= memory_end || !((page = virt_to_page(objp)))) + if (!objp) return 0; + if ((unsigned long)objp >= memory_end) + return 0; + + page = virt_to_head_page(objp); + if (!page) + return 0; + + /* + * If the allocator sets PageSlab, we know the pointer came from + * kmalloc(). + */ if (PageSlab(page)) return ksize(objp); - BUG_ON(page->index < 0); - BUG_ON(page->index >= MAX_ORDER); + /* + * The ksize() function is only guaranteed to work for pointers + * returned by kmalloc(). So handle arbitrary pointers, that we expect + * always to be compound pages, here. + */ + if (PageCompound(page)) + order = compound_order(page); - return (PAGE_SIZE << page->index); + /* + * Finally, handle arbitrary pointers that don't set PageSlab. + * Default to 0-order in the case when we're unable to ksize() + * the object. + */ + return PAGE_SIZE << order; } /* -- cgit v0.10.2 From a361a82c10c20eff402d72ce83b66913d04894ee Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 5 Jun 2008 22:46:08 -0700 Subject: fujitsu-laptop: autoload module on Lifebook P1510D Signed-off-by: Dan Williams Cc: Jonathan Woithe Cc: Len Brown Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/misc/fujitsu-laptop.c b/drivers/misc/fujitsu-laptop.c index e2e7c05..6d14e8f 100644 --- a/drivers/misc/fujitsu-laptop.c +++ b/drivers/misc/fujitsu-laptop.c @@ -352,3 +352,9 @@ MODULE_AUTHOR("Jonathan Woithe"); MODULE_DESCRIPTION("Fujitsu laptop extras support"); MODULE_VERSION(FUJITSU_DRIVER_VERSION); MODULE_LICENSE("GPL"); + +static struct pnp_device_id pnp_ids[] = { + { .id = "FUJ02bf" }, + { .id = "" } +}; +MODULE_DEVICE_TABLE(pnp, pnp_ids); -- cgit v0.10.2 From 34397892a3d677d857fdaf8dec66a66b07dde0b5 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Thu, 5 Jun 2008 22:46:09 -0700 Subject: doc: update to URL and status of kernel-docs.txt entry Update status and URL for the "Gary's Encyclopedia" entry. Signed-off-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-docs.txt b/Documentation/kernel-docs.txt index 5a4ef48..28cdc2a 100644 --- a/Documentation/kernel-docs.txt +++ b/Documentation/kernel-docs.txt @@ -715,14 +715,14 @@ * Name: "Gary's Encyclopedia - The Linux Kernel" Author: Gary (I suppose...). - URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm - Keywords: links, not found here?. + URL: http://slencyclopedia.berlios.de/index.html + Keywords: linux, community, everything! Description: Gary's Encyclopedia exists to allow the rapid finding of documentation and other information of interest to GNU/Linux users. It has about 4000 links to external pages in 150 major categories. This link is for kernel-specific links, documents, - sites... Look there if you could not find here what you were - looking for. + sites... This list is now hosted by developer.Berlios.de, + but seems not to have been updated since sometime in 1999. * Name: "The home page of Linux-MM" Author: The Linux-MM team. -- cgit v0.10.2 From 06e1e4ffbd1932e288839b3140cda6b8141eb684 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 5 Jun 2008 22:46:10 -0700 Subject: uml: deal with host time going backwards Protection against the host's time going backwards (eg, ntp activity on the host) by keeping track of the time at the last tick and if it's greater than the current time, keep time stopped until the host catches up. Cc: Nix Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/time.c b/arch/um/os-Linux/time.c index bee98f4..dec5678 100644 --- a/arch/um/os-Linux/time.c +++ b/arch/um/os-Linux/time.c @@ -106,6 +106,10 @@ static void deliver_alarm(void) unsigned long long this_tick = os_nsecs(); int one_tick = UM_NSEC_PER_SEC / UM_HZ; + /* Protection against the host's time going backwards */ + if ((last_tick != 0) && (this_tick < last_tick)) + this_tick = last_tick; + if (last_tick == 0) last_tick = this_tick - one_tick; @@ -148,6 +152,9 @@ static int after_sleep_interval(struct timespec *ts) start_usecs = usec; start_usecs -= skew / UM_NSEC_PER_USEC; + if (start_usecs < 0) + start_usecs = 0; + tv = ((struct timeval) { .tv_sec = start_usecs / UM_USEC_PER_SEC, .tv_usec = start_usecs % UM_USEC_PER_SEC }); interval = ((struct itimerval) { { 0, usec }, tv }); -- cgit v0.10.2 From 9f31287b443f30a591539e448fb628e3827a8f61 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Thu, 5 Jun 2008 22:46:11 -0700 Subject: uml: remove a duplicate include Removed duplicated include file "kern_util.h" in arch/um/drivers/ubd_kern.c. Signed-off-by: Huang Weiyi Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c index 44ad160..b58fb89 100644 --- a/arch/um/drivers/ubd_kern.c +++ b/arch/um/drivers/ubd_kern.c @@ -49,7 +49,6 @@ #include "irq_user.h" #include "irq_kern.h" #include "ubd_user.h" -#include "kern_util.h" #include "os.h" #include "mem.h" #include "mem_kern.h" -- cgit v0.10.2 From 40fb16a360d9c6459afee91dc793c1e3374feb94 Mon Sep 17 00:00:00 2001 From: Tom Spink Date: Thu, 5 Jun 2008 22:46:12 -0700 Subject: uml: deal with inaccessible address space start This patch makes os_get_task_size locate the bottom of the address space, as well as the top. This is for systems which put a lower limit on mmap addresses. It works by manually scanning pages from zero onwards until a valid page is found. Because the bottom of the address space may not be zero, it's not sufficient to assume the top of the address space is the size of the address space. The size is the difference between the top address and bottom address. [jdike@addtoit.com: changed the name to reflect that this function is supposed to return the top of the process address space, not its size and changed the return value to reflect that. Also some minor formatting changes] Signed-off-by: Tom Spink Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/include/os.h b/arch/um/include/os.h index e2716ac..db5be46 100644 --- a/arch/um/include/os.h +++ b/arch/um/include/os.h @@ -299,6 +299,6 @@ extern int os_arch_prctl(int pid, int code, unsigned long *addr); extern int get_pty(void); /* sys-$ARCH/task_size.c */ -extern unsigned long os_get_task_size(void); +extern unsigned long os_get_top_address(void); #endif diff --git a/arch/um/kernel/um_arch.c b/arch/um/kernel/um_arch.c index 9db85b2..8d84250 100644 --- a/arch/um/kernel/um_arch.c +++ b/arch/um/kernel/um_arch.c @@ -274,7 +274,7 @@ int __init linux_main(int argc, char **argv) if (have_root == 0) add_arg(DEFAULT_COMMAND_LINE); - host_task_size = os_get_task_size(); + host_task_size = os_get_top_address(); /* * TASK_SIZE needs to be PGDIR_SIZE aligned or else exit_mmap craps * out diff --git a/arch/um/os-Linux/sys-i386/task_size.c b/arch/um/os-Linux/sys-i386/task_size.c index ccb49b0..be04c1e 100644 --- a/arch/um/os-Linux/sys-i386/task_size.c +++ b/arch/um/os-Linux/sys-i386/task_size.c @@ -63,7 +63,7 @@ static int page_ok(unsigned long page) return ok; } -unsigned long os_get_task_size(void) +unsigned long os_get_top_address(void) { struct sigaction sa, old; unsigned long bottom = 0; @@ -76,9 +76,9 @@ unsigned long os_get_task_size(void) * hosts, but shouldn't hurt otherwise. */ unsigned long top = 0xffffd000 >> UM_KERN_PAGE_SHIFT; - unsigned long test; + unsigned long test, original; - printf("Locating the top of the address space ... "); + printf("Locating the bottom of the address space ... "); fflush(stdout); /* @@ -89,16 +89,31 @@ unsigned long os_get_task_size(void) sigemptyset(&sa.sa_mask); sa.sa_flags = SA_NODEFER; if (sigaction(SIGSEGV, &sa, &old)) { - perror("os_get_task_size"); + perror("os_get_top_address"); exit(1); } - if (!page_ok(bottom)) { - fprintf(stderr, "Address 0x%x no good?\n", - bottom << UM_KERN_PAGE_SHIFT); + /* Manually scan the address space, bottom-up, until we find + * the first valid page (or run out of them). + */ + for (bottom = 0; bottom < top; bottom++) { + if (page_ok(bottom)) + break; + } + + /* If we've got this far, we ran out of pages. */ + if (bottom == top) { + fprintf(stderr, "Unable to determine bottom of address " + "space.\n"); exit(1); } + printf("0x%x\n", bottom << UM_KERN_PAGE_SHIFT); + printf("Locating the top of the address space ... "); + fflush(stdout); + + original = bottom; + /* This could happen with a 4G/4G split */ if (page_ok(top)) goto out; @@ -114,7 +129,7 @@ unsigned long os_get_task_size(void) out: /* Restore the old SIGSEGV handling */ if (sigaction(SIGSEGV, &old, NULL)) { - perror("os_get_task_size"); + perror("os_get_top_address"); exit(1); } top <<= UM_KERN_PAGE_SHIFT; diff --git a/arch/um/os-Linux/sys-x86_64/task_size.c b/arch/um/os-Linux/sys-x86_64/task_size.c index fad6f57..26a0dd1 100644 --- a/arch/um/os-Linux/sys-x86_64/task_size.c +++ b/arch/um/os-Linux/sys-x86_64/task_size.c @@ -1,4 +1,4 @@ -unsigned long os_get_task_size(unsigned long shift) +unsigned long os_get_top_address(unsigned long shift) { /* The old value of CONFIG_TOP_ADDR */ return 0x7fc0000000; -- cgit v0.10.2 From 8bfd04b974689f700bbd053ad6e66b0a95fb80c9 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 5 Jun 2008 22:46:13 -0700 Subject: uml: memcpy export needs to follow host declaration x86_64 defines either memcpy or __memcpy depending on the gcc version, and it looks like UML needs to follow that in its exporting. Cc: Gabriel C Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/sys-x86_64/ksyms.c b/arch/um/sys-x86_64/ksyms.c index 6604673..1db2fce 100644 --- a/arch/um/sys-x86_64/ksyms.c +++ b/arch/um/sys-x86_64/ksyms.c @@ -3,5 +3,9 @@ #include /*XXX: we need them because they would be exported by x86_64 */ +#if (__GNUC__ == 4 && __GNUC_MINOR__ >= 3) || __GNUC__ > 4 +EXPORT_SYMBOL(memcpy); +#else EXPORT_SYMBOL(__memcpy); +#endif EXPORT_SYMBOL(csum_partial); -- cgit v0.10.2 From 3d5ede6f776bdb1483bcd086f79c3bf41fed3865 Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 5 Jun 2008 22:46:13 -0700 Subject: uml: stub needs to tolerate SIGWINCH We lost the marking of SIGWINCH as being OK to receive during stub execution, causing a panic should that happen. Cc: Benedict Verheyen Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index 6be028c..172ad8f 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -55,7 +55,7 @@ static int ptrace_dump_regs(int pid) * Signals that are OK to receive in the stub - we'll just continue it. * SIGWINCH will happen when UML is inside a detached screen. */ -#define STUB_SIG_MASK (1 << SIGVTALRM) +#define STUB_SIG_MASK ((1 << SIGVTALRM) | (1 << SIGWINCH)) /* Signals that the stub will finish with - anything else is an error */ #define STUB_DONE_MASK (1 << SIGTRAP) -- cgit v0.10.2 From b6d8adf477439e7086224bc9674c6b6638780783 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Thu, 5 Jun 2008 22:46:14 -0700 Subject: uml: PATH_MAX needs limits.h Include limits.h to get a definition of PATH_MAX. Signed-off-by: Ingo Molnar Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/helper.c b/arch/um/os-Linux/helper.c index 74ca7aa..30860b8 100644 --- a/arch/um/os-Linux/helper.c +++ b/arch/um/os-Linux/helper.c @@ -7,6 +7,7 @@ #include #include #include +#include #include #include #include "kern_constants.h" -- cgit v0.10.2 From 44d1b980c72db0faf35adb082fb2208351803028 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 5 Jun 2008 22:46:18 -0700 Subject: Fix various old email addresses for dwmw2 Although if people have questions about ARCnet, perhaps it's _better_ for them to be mailing dwmw2@cam.ac.uk about it... Signed-off-by: David Woodhouse Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/networking/arcnet.txt b/Documentation/networking/arcnet.txt index 770fc41..7960125 100644 --- a/Documentation/networking/arcnet.txt +++ b/Documentation/networking/arcnet.txt @@ -46,7 +46,7 @@ These are the ARCnet drivers for Linux. This new release (2.91) has been put together by David Woodhouse -, in an attempt to tidy up the driver after adding support +, in an attempt to tidy up the driver after adding support for yet another chipset. Now the generic support has been separated from the individual chipset drivers, and the source files aren't quite so packed with #ifdefs! I've changed this file a bit, but kept it in the first person from diff --git a/arch/frv/kernel/cmode.S b/arch/frv/kernel/cmode.S index 81ba28a..53deeb5 100644 --- a/arch/frv/kernel/cmode.S +++ b/arch/frv/kernel/cmode.S @@ -1,7 +1,7 @@ /* cmode.S: clock mode management * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/frv/kernel/sleep.S b/arch/frv/kernel/sleep.S index c9b2d51..f67bf73 100644 --- a/arch/frv/kernel/sleep.S +++ b/arch/frv/kernel/sleep.S @@ -1,7 +1,7 @@ /* sleep.S: power saving mode entry * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/arch/frv/mb93090-mb00/pci-dma-nommu.c b/arch/frv/mb93090-mb00/pci-dma-nommu.c index 4985466..64ee58d 100644 --- a/arch/frv/mb93090-mb00/pci-dma-nommu.c +++ b/arch/frv/mb93090-mb00/pci-dma-nommu.c @@ -1,7 +1,7 @@ /* pci-dma-nommu.c: Dynamic DMA mapping support for the FRV * * Copyright (C) 2004 Red Hat, Inc. All Rights Reserved. - * Written by David Woodhouse (dwmw2@redhat.com) + * Written by David Woodhouse (dwmw2@infradead.org) * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License diff --git a/drivers/mtd/redboot.c b/drivers/mtd/redboot.c index 4747490..c5030f9 100644 --- a/drivers/mtd/redboot.c +++ b/drivers/mtd/redboot.c @@ -295,5 +295,5 @@ module_init(redboot_parser_init); module_exit(redboot_parser_exit); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Red Hat, Inc. - David Woodhouse "); +MODULE_AUTHOR("David Woodhouse "); MODULE_DESCRIPTION("Parsing code for RedBoot Flash Image System (FIS) tables"); diff --git a/fs/afs/callback.c b/fs/afs/callback.c index a78d5b2..587ef51 100644 --- a/fs/afs/callback.c +++ b/fs/afs/callback.c @@ -8,7 +8,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Authors: David Woodhouse + * Authors: David Woodhouse * David Howells * */ diff --git a/fs/afs/inode.c b/fs/afs/inode.c index 08db82e..bb47217 100644 --- a/fs/afs/inode.c +++ b/fs/afs/inode.c @@ -8,7 +8,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * - * Authors: David Woodhouse + * Authors: David Woodhouse * David Howells * */ diff --git a/fs/afs/super.c b/fs/afs/super.c index 4b572b8..7e3faee 100644 --- a/fs/afs/super.c +++ b/fs/afs/super.c @@ -10,7 +10,7 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * * Authors: David Howells - * David Woodhouse + * David Woodhouse * */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index c42bc7f..53ea3dc 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -1,7 +1,7 @@ /* * linux/include/linux/mtd/nand.h * - * Copyright (c) 2000 David Woodhouse + * Copyright (c) 2000 David Woodhouse * Steven J. Hill * Thomas Gleixner * diff --git a/include/linux/tty.h b/include/linux/tty.h index 7f7121f..324a3b2 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -36,7 +36,7 @@ #define N_6PACK 7 #define N_MASC 8 /* Reserved for Mobitex module */ #define N_R3964 9 /* Reserved for Simatic R3964 module */ -#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ #define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ #define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data */ /* cards about SMS messages */ -- cgit v0.10.2 From f2eb432715a81a703e626df59347ba3557009557 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 5 Jun 2008 22:46:18 -0700 Subject: rtc-ds1374: rename device to just "ds1374" Change the name of the device from "rtc-ds1374" to just "ds1374", to match what all other RTC drivers do. I seem to remember that this name was chosen to avoid possible confusion with an older ds1374 driver, but that driver was removed 3 months ago. Signed-off-by: Jean Delvare Signed-off-by: Alessandro Zummo Acked-by: Kumar Gala Cc: Paul Mackerras Cc: Benjamin Herrenschmidt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 3a7054e..019657c11 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -432,7 +432,7 @@ static struct i2c_driver_device i2c_devices[] __initdata = { {"dallas,ds1339", "ds1339"}, {"dallas,ds1340", "ds1340"}, {"stm,m41t00", "m41t00"}, - {"dallas,ds1374", "rtc-ds1374"}, + {"dallas,ds1374", "ds1374"}, }; static int __init of_find_i2c_driver(struct device_node *node, diff --git a/drivers/of/of_i2c.c b/drivers/of/of_i2c.c index 715a444..b2ccdcb 100644 --- a/drivers/of/of_i2c.c +++ b/drivers/of/of_i2c.c @@ -21,7 +21,6 @@ struct i2c_driver_device { }; static struct i2c_driver_device i2c_devices[] = { - { "dallas,ds1374", "rtc-ds1374" }, }; static int of_find_i2c_driver(struct device_node *node, diff --git a/drivers/rtc/rtc-ds1374.c b/drivers/rtc/rtc-ds1374.c index fa2d2f8..640acd2 100644 --- a/drivers/rtc/rtc-ds1374.c +++ b/drivers/rtc/rtc-ds1374.c @@ -42,7 +42,7 @@ #define DS1374_REG_TCR 0x09 /* Trickle Charge */ static const struct i2c_device_id ds1374_id[] = { - { "rtc-ds1374", 0 }, + { "ds1374", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, ds1374_id); -- cgit v0.10.2 From 3527fb326f07bc8e85cf66d4f987ebeea24e8e4a Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Thu, 5 Jun 2008 22:46:19 -0700 Subject: lib: export bitrev16 Bluetooth will be able to use this. Signed-off-by: Harvey Harrison Cc: Marcel Holtmann Cc: Dave Young Cc: Akinobu Mita Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/bitrev.h b/include/linux/bitrev.h index 05e540d..7ffe03f 100644 --- a/include/linux/bitrev.h +++ b/include/linux/bitrev.h @@ -10,6 +10,7 @@ static inline u8 bitrev8(u8 byte) return byte_rev_table[byte]; } +extern u16 bitrev16(u16 in); extern u32 bitrev32(u32 in); #endif /* _LINUX_BITREV_H */ diff --git a/lib/bitrev.c b/lib/bitrev.c index 989aff7..3956203 100644 --- a/lib/bitrev.c +++ b/lib/bitrev.c @@ -42,10 +42,11 @@ const u8 byte_rev_table[256] = { }; EXPORT_SYMBOL_GPL(byte_rev_table); -static __always_inline u16 bitrev16(u16 x) +u16 bitrev16(u16 x) { return (bitrev8(x & 0xff) << 8) | bitrev8(x >> 8); } +EXPORT_SYMBOL(bitrev16); /** * bitrev32 - reverse the order of bits in a u32 value -- cgit v0.10.2 From 93b071139a956e51c98cdefd50a47981a4eb852e Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Thu, 5 Jun 2008 22:46:21 -0700 Subject: introduce memory_read_from_buffer() This patch introduces memory_read_from_buffer(). The only difference between memory_read_from_buffer() and simple_read_from_buffer() is which address space the function copies to. simple_read_from_buffer copies to user space memory. memory_read_from_buffer copies to normal memory. Signed-off-by: Akinobu Mita Cc: Al Viro Cc: Doug Warzecha Cc: Zhang Rui Cc: Matt Domsch Cc: Abhay Salunke Cc: Greg Kroah-Hartman Cc: Markus Rechberger Cc: Kay Sievers Cc: Bob Moore Cc: Thomas Renninger Cc: Len Brown Cc: Benjamin Herrenschmidt Cc: "Antonino A. Daplas" Cc: Krzysztof Helt Cc: Geert Uytterhoeven Cc: Martin Schwidefsky Cc: Heiko Carstens Cc: Peter Oberparleiter Cc: Michael Holzheu Cc: Brian King Cc: James E.J. Bottomley Cc: Andrew Vasquez Cc: Seokmann Ju Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/libfs.c b/fs/libfs.c index b004dfa..892d41c 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -528,6 +528,23 @@ ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, return count; } +ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, + const void *from, size_t available) +{ + loff_t pos = *ppos; + + if (pos < 0) + return -EINVAL; + if (pos >= available) + return 0; + if (count > available - pos) + count = available - pos; + memcpy(to, from + pos, count); + *ppos = pos + count; + + return count; +} + /* * Transaction based IO. * The file expects a single write which triggers the transaction, and then @@ -800,6 +817,7 @@ EXPORT_SYMBOL(simple_statfs); EXPORT_SYMBOL(simple_sync_file); EXPORT_SYMBOL(simple_unlink); EXPORT_SYMBOL(simple_read_from_buffer); +EXPORT_SYMBOL(memory_read_from_buffer); EXPORT_SYMBOL(simple_transaction_get); EXPORT_SYMBOL(simple_transaction_read); EXPORT_SYMBOL(simple_transaction_release); diff --git a/include/linux/fs.h b/include/linux/fs.h index f413085..d490779 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2000,7 +2000,10 @@ extern int simple_fill_super(struct super_block *, int, struct tree_descr *); extern int simple_pin_fs(struct file_system_type *, struct vfsmount **mount, int *count); extern void simple_release_fs(struct vfsmount **mount, int *count); -extern ssize_t simple_read_from_buffer(void __user *, size_t, loff_t *, const void *, size_t); +extern ssize_t simple_read_from_buffer(void __user *to, size_t count, + loff_t *ppos, const void *from, size_t available); +extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, + const void *from, size_t available); #ifdef CONFIG_MIGRATION extern int buffer_migrate_page(struct address_space *, -- cgit v0.10.2 From b66862f7663332aa1ecb3ebda4086360ddb8befc Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:24 -0700 Subject: devcgroup: make a helper to convert cgroup_subsys_state to devs_cgroup This is just picking the container_of out of cgroup_to_devcgroup into a separate function. This new css_to_devcgroup will be used in the 2nd patch. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Cc: Paul Menage Cc: Balbir Singh Cc: James Morris Cc: Chris Wright Cc: Stephen Smalley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 4ea5836..15f2f80 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -49,10 +49,14 @@ struct dev_cgroup { spinlock_t lock; }; +static inline struct dev_cgroup *css_to_devcgroup(struct cgroup_subsys_state *s) +{ + return container_of(s, struct dev_cgroup, css); +} + static inline struct dev_cgroup *cgroup_to_devcgroup(struct cgroup *cgroup) { - return container_of(cgroup_subsys_state(cgroup, devices_subsys_id), - struct dev_cgroup, css); + return css_to_devcgroup(cgroup_subsys_state(cgroup, devices_subsys_id)); } struct cgroup_subsys devices_subsys; -- cgit v0.10.2 From cc9cb219aac24ffc711566c8f372c2b3a3bf840f Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:26 -0700 Subject: devscgroup: relax task to dev_cgroup conversion Two functions, that need to get a device_cgroup from a task (they are devcgroup_inode_permission and devcgroup_inode_mknod) make it in a strange way: They get a css_set from task, then a subsys_state from css_set, then a cgroup from the state and then a subsys_state again from the cgroup. Besides, the devices_subsys_id is read from memory, whilst there's a enum-ed constant for it. Optimize this part a bit: 1. Get the subsys_stats form the task and be done - no 2 extra dereferences, 2. Use the device_subsys_id constant, not the value from memory (i.e. one less dereference). Found while preparing 2.6.26 OpenVZ port. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Acked-by: Paul Menage Cc: Balbir Singh Cc: James Morris Cc: Chris Wright Cc: Stephen Smalley Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index 15f2f80..f9941a7 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -506,7 +506,6 @@ struct cgroup_subsys devices_subsys = { int devcgroup_inode_permission(struct inode *inode, int mask) { - struct cgroup *cgroup; struct dev_cgroup *dev_cgroup; struct dev_whitelist_item *wh; @@ -515,8 +514,8 @@ int devcgroup_inode_permission(struct inode *inode, int mask) return 0; if (!S_ISBLK(inode->i_mode) && !S_ISCHR(inode->i_mode)) return 0; - cgroup = task_cgroup(current, devices_subsys.subsys_id); - dev_cgroup = cgroup_to_devcgroup(cgroup); + dev_cgroup = css_to_devcgroup(task_subsys_state(current, + devices_subsys_id)); if (!dev_cgroup) return 0; @@ -547,12 +546,11 @@ acc_check: int devcgroup_inode_mknod(int mode, dev_t dev) { - struct cgroup *cgroup; struct dev_cgroup *dev_cgroup; struct dev_whitelist_item *wh; - cgroup = task_cgroup(current, devices_subsys.subsys_id); - dev_cgroup = cgroup_to_devcgroup(cgroup); + dev_cgroup = css_to_devcgroup(task_subsys_state(current, + devices_subsys_id)); if (!dev_cgroup) return 0; -- cgit v0.10.2 From 7db9cfd380205f6b50afdc3bc3619f876a5eaf0d Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:27 -0700 Subject: devscgroup: check for device permissions at mount time Currently even if a task sits in an all-denied cgroup it can still mount any block device in any mode it wants. Put a proper check in do_open for block device to prevent this. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Tested-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/block_dev.c b/fs/block_dev.c index 7d822fa..470c10c 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include #include @@ -928,9 +929,14 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) { struct module *owner = NULL; struct gendisk *disk; - int ret = -ENXIO; + int ret; int part; + ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode); + if (ret != 0) + return ret; + + ret = -ENXIO; file->f_mapping = bdev->bd_inode->i_mapping; lock_kernel(); disk = get_gendisk(bdev->bd_dev, &part); -- cgit v0.10.2 From d1ee2971f5bd8a16bc5ecfe1b00e14b4fe407c4f Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Thu, 5 Jun 2008 22:46:28 -0700 Subject: devscgroup: make white list more compact in some cases Consider you added a 'c foo:bar r' permission to some cgroup and then (a bit later) 'c'foo:bar w' for it. After this you'll see the c foo:bar r c foo:bar w lines in a devices.list file. Another example - consider you added 10 'c foo:bar r' permissions to some cgroup (e.g. by mistake). After this you'll see 10 c foo:bar r lines in a list file. This is weird. This situation also has one more annoying consequence. Having many items in a white list makes permissions checking slower, sine it has to walk a longer list. The proposal is to merge permissions for items, that correspond to the same device. Signed-off-by: Pavel Emelyanov Acked-by: Serge Hallyn Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/device_cgroup.c b/security/device_cgroup.c index f9941a7..baf3488 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -106,7 +106,7 @@ free_and_exit: static int dev_whitelist_add(struct dev_cgroup *dev_cgroup, struct dev_whitelist_item *wh) { - struct dev_whitelist_item *whcopy; + struct dev_whitelist_item *whcopy, *walk; whcopy = kmalloc(sizeof(*whcopy), GFP_KERNEL); if (!whcopy) @@ -114,7 +114,21 @@ static int dev_whitelist_add(struct dev_cgroup *dev_cgroup, memcpy(whcopy, wh, sizeof(*whcopy)); spin_lock(&dev_cgroup->lock); - list_add_tail(&whcopy->list, &dev_cgroup->whitelist); + list_for_each_entry(walk, &dev_cgroup->whitelist, list) { + if (walk->type != wh->type) + continue; + if (walk->major != wh->major) + continue; + if (walk->minor != wh->minor) + continue; + + walk->access |= wh->access; + kfree(whcopy); + whcopy = NULL; + } + + if (whcopy != NULL) + list_add_tail(&whcopy->list, &dev_cgroup->whitelist); spin_unlock(&dev_cgroup->lock); return 0; } -- cgit v0.10.2 From aae8679b0ebcaa92f99c1c3cb0cd651594a43915 Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:31 -0700 Subject: pagemap: fix bug in add_to_pagemap, require aligned-length reads of /proc/pid/pagemap Fix a bug in add_to_pagemap. Previously, since pm->out was a char *, put_user was only copying 1 byte of every PFN, resulting in the top 7 bytes of each PFN not being copied. By requiring that reads be a multiple of 8 bytes, I can make pm->out and pm->end u64*s instead of char*s, which makes put_user work properly, and also simplifies the logic in add_to_pagemap a bit. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Thomas Tuttle Cc: Matt Mackall Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 88717c0..1740362 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -496,7 +496,7 @@ const struct file_operations proc_clear_refs_operations = { }; struct pagemapread { - char __user *out, *end; + u64 __user *out, *end; }; #define PM_ENTRY_BYTES sizeof(u64) @@ -519,21 +519,11 @@ struct pagemapread { static int add_to_pagemap(unsigned long addr, u64 pfn, struct pagemapread *pm) { - /* - * Make sure there's room in the buffer for an - * entire entry. Otherwise, only copy part of - * the pfn. - */ - if (pm->out + PM_ENTRY_BYTES >= pm->end) { - if (copy_to_user(pm->out, &pfn, pm->end - pm->out)) - return -EFAULT; - pm->out = pm->end; - return PM_END_OF_BUFFER; - } - if (put_user(pfn, pm->out)) return -EFAULT; - pm->out += PM_ENTRY_BYTES; + pm->out++; + if (pm->out >= pm->end) + return PM_END_OF_BUFFER; return 0; } @@ -634,7 +624,7 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, ret = -EINVAL; /* file position must be aligned */ - if (*ppos % PM_ENTRY_BYTES) + if ((*ppos % PM_ENTRY_BYTES) || (count % PM_ENTRY_BYTES)) goto out_task; ret = 0; @@ -664,8 +654,8 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, goto out_pages; } - pm.out = buf; - pm.end = buf + count; + pm.out = (u64 *)buf; + pm.end = (u64 *)(buf + count); if (!ptrace_may_attach(task)) { ret = -EIO; @@ -690,9 +680,9 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, if (ret == PM_END_OF_BUFFER) ret = 0; /* don't need mmap_sem for these, but this looks cleaner */ - *ppos += pm.out - buf; + *ppos += (char *)pm.out - buf; if (!ret) - ret = pm.out - buf; + ret = (char *)pm.out - buf; } out_pages: -- cgit v0.10.2 From 37340746a66e5e7feed5945f28cb75d90a8fd9f6 Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 5 Jun 2008 22:46:32 -0700 Subject: cpusets: fix bug when adding nonexistent cpu or mem Adding a nonexistent cpu to a cpuset will be omitted quietly. It should return -EINVAL. Example: (real_nr_cpus <= 4 < NR_CPUS or cpu#4 was just offline) # cat cpus 0-1 # /bin/echo 4 > cpus # /bin/echo $? 0 # cat cpus # The same occurs when add a nonexistent mem. This patch will fix this bug. And when *buf == "", the check is unneeded. Signed-off-by: Lai Jiangshan Acked-by: Paul Jackson Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 86ea9e3..039baa4 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -797,8 +797,10 @@ static int update_cpumask(struct cpuset *cs, char *buf) retval = cpulist_parse(buf, trialcs.cpus_allowed); if (retval < 0) return retval; + + if (!cpus_subset(trialcs.cpus_allowed, cpu_online_map)) + return -EINVAL; } - cpus_and(trialcs.cpus_allowed, trialcs.cpus_allowed, cpu_online_map); retval = validate_change(cs, &trialcs); if (retval < 0) return retval; @@ -932,9 +934,11 @@ static int update_nodemask(struct cpuset *cs, char *buf) retval = nodelist_parse(buf, trialcs.mems_allowed); if (retval < 0) goto done; + + if (!nodes_subset(trialcs.mems_allowed, + node_states[N_HIGH_MEMORY])) + return -EINVAL; } - nodes_and(trialcs.mems_allowed, trialcs.mems_allowed, - node_states[N_HIGH_MEMORY]); oldmem = cs->mems_allowed; if (nodes_equal(oldmem, trialcs.mems_allowed)) { retval = 0; /* Too easy - nothing to do */ -- cgit v0.10.2 From dba6a4d32d8677c99e73798d3375417f8a6d46de Mon Sep 17 00:00:00 2001 From: Daniel Walker Date: Thu, 5 Jun 2008 22:46:32 -0700 Subject: keys: remove unused key_alloc_sem This semaphore doesn't appear to be used, so remove it. Signed-off-by: Daniel Walker Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/keys/internal.h b/security/keys/internal.h index 8c05587..b39f5c2 100644 --- a/security/keys/internal.h +++ b/security/keys/internal.h @@ -78,7 +78,6 @@ extern unsigned key_quota_maxbytes; extern struct rb_root key_serial_tree; extern spinlock_t key_serial_lock; -extern struct semaphore key_alloc_sem; extern struct mutex key_construction_mutex; extern wait_queue_head_t request_key_conswq; -- cgit v0.10.2 From 10732c35dff6c2e15e413e7806a7114a2faa0ecf Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 5 Jun 2008 22:46:33 -0700 Subject: fbcon: fix wrong vmode bits copied on console switch The interlaced and double line mode bits should not be copied to new console when the console is switched. Otherwise, the new console may be set to incorrect refresh rate. Also, the x and y offsets does not need to be copied. Signed-off-by: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/console/fbcon.c b/drivers/video/console/fbcon.c index 5fa8b76..97aff8d 100644 --- a/drivers/video/console/fbcon.c +++ b/drivers/video/console/fbcon.c @@ -2275,9 +2275,7 @@ static int fbcon_switch(struct vc_data *vc) * in fb_set_var() */ info->var.activate = var.activate; - var.yoffset = info->var.yoffset; - var.xoffset = info->var.xoffset; - var.vmode = info->var.vmode; + var.vmode |= info->var.vmode & ~FB_VMODE_MASK; fb_set_var(info, &var); ops->var = info->var; -- cgit v0.10.2 From 879000f94442860e72c934f9e568989bc7fb8ec4 Mon Sep 17 00:00:00 2001 From: CHIKAMA masaki Date: Thu, 5 Jun 2008 22:46:33 -0700 Subject: cpufreq: fix null object access on Transmeta CPU If cpu specific cpufreq driver(i.e. longrun) has "setpolicy" function, governor object isn't set into cpufreq_policy object at "__cpufreq_set_policy" function in driver/cpufreq/cpufreq.c . This causes a null object access at "store_scaling_setspeed" and "show_scaling_setspeed" function in driver/cpufreq/cpufreq.c when reading or writing through /sys interface (ex. cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_setspeed) Addresses: http://bugzilla.kernel.org/show_bug.cgi?id=10654 https://bugzilla.redhat.com/show_bug.cgi?id=443354 Signed-off-by: CHIKAMA Masaki Cc: Dave Jones Cc: Chuck Ebbert Acked-by: Dominik Brodowski Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 86f0a24..4e07d1f 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -625,7 +625,7 @@ static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, unsigned int freq = 0; unsigned int ret; - if (!policy->governor->store_setspeed) + if (!policy->governor || !policy->governor->store_setspeed) return -EINVAL; ret = sscanf(buf, "%u", &freq); @@ -639,7 +639,7 @@ static ssize_t store_scaling_setspeed(struct cpufreq_policy *policy, static ssize_t show_scaling_setspeed(struct cpufreq_policy *policy, char *buf) { - if (!policy->governor->show_setspeed) + if (!policy->governor || !policy->governor->show_setspeed) return sprintf(buf, "\n"); return policy->governor->show_setspeed(policy, buf); -- cgit v0.10.2 From 774533b3e86fa52941c79aa80ab3f0cc511bba7f Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Thu, 5 Jun 2008 22:46:34 -0700 Subject: vt: fix background color on line feed, DEC invert Original report: """I used to force my console to black-on-white by the command `setterm -inversescreen on`. In 2.6.26-rc4, I get lots of black background characters.""" Another addendum to commit c9e587ab. This was previously missed out since I was not aware of what vc_decscnm was for. Signed-off-by: Jan Engelhardt Reported-by: Tested-by: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/vt.c b/drivers/char/vt.c index fa1ffbf..b8b2498 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -434,7 +434,7 @@ static void update_attr(struct vc_data *vc) vc->vc_blink, vc->vc_underline, vc->vc_reverse ^ vc->vc_decscnm, vc->vc_italic); vc->vc_video_erase_char = (build_attr(vc, vc->vc_color, 1, vc->vc_blink, 0, vc->vc_decscnm, 0) << 8) | ' '; - vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, false, false) << 8) | ' '; + vc->vc_scrl_erase_char = (build_attr(vc, vc->vc_def_color, 1, false, false, vc->vc_decscnm, false) << 8) | ' '; } /* Note: inverting the screen twice should revert to the original state */ -- cgit v0.10.2 From 68aa0a206a7a2dd8655a50b36e8274eb87b84544 Mon Sep 17 00:00:00 2001 From: Nadia Derbey Date: Thu, 5 Jun 2008 22:46:36 -0700 Subject: ipc: restore MSGPOOL original value When posting: [PATCH 1/8] Scaling msgmni to the amount of lowmem (see http://article.gmane.org/gmane.linux.kernel/637849/) I changed the MSGPOOL value to make it fit what is said in the man pages (i.e. a size in bytes). But Michael Kerrisk rightly complained that this change could affect the ABI. So I'm posting this patch to make MSGPOOL expressed back in Kbytes. Michael, on his side, has fixed the man page. Signed-off-by: Nadia Derbey Cc: Pierre Peiffer Cc: Manfred Spraul Acked-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/msg.h b/include/linux/msg.h index 6f3b8e7..56abf155 100644 --- a/include/linux/msg.h +++ b/include/linux/msg.h @@ -64,11 +64,11 @@ struct msginfo { #define MSGMNB 16384 /* <= INT_MAX */ /* default max size of a message queue */ /* unused */ -#define MSGPOOL (MSGMNI * MSGMNB) /* size in bytes of message pool */ +#define MSGPOOL (MSGMNI * MSGMNB / 1024) /* size in kbytes of message pool */ #define MSGTQL MSGMNB /* number of system message headers */ #define MSGMAP MSGMNB /* number of entries in message map */ #define MSGSSZ 16 /* message segment size */ -#define __MSGSEG (MSGPOOL / MSGSSZ) /* max no. of segments */ +#define __MSGSEG ((MSGPOOL * 1024) / MSGSSZ) /* max no. of segments */ #define MSGSEG (__MSGSEG <= 0xffff ? __MSGSEG : 0xffff) #ifdef __KERNEL__ -- cgit v0.10.2 From dfcceb26f89da86ec4ac9583c4515504af8c6c84 Mon Sep 17 00:00:00 2001 From: Nadia Derbey Date: Thu, 5 Jun 2008 22:46:38 -0700 Subject: ipc: only output msgmni value at boot time When posting: [PATCH 1/8] Scaling msgmni to the amount of lowmem (see http://lkml.org/lkml/2008/2/11/171), I have added a KERN_INFO message that is output each time msgmni is recomputed. In http://lkml.org/lkml/2008/4/29/575 Tony Luck complained that this message references an ipc namespace address that is useless. I first thought of using an audit_log instead of a printk, as suggested by Serge Hallyn. But unfortunately, we do not have any other information than the namespace address to provide here too. So I chose to move the message and output it only at boot time, removing the reference to the namespace. Signed-off-by: Nadia Derbey Cc: Pierre Peiffer Cc: Manfred Spraul Acked-by: Tony Luck Cc: "Serge E. Hallyn" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/ipc/msg.c b/ipc/msg.c index 32494e8..b4eee1c 100644 --- a/ipc/msg.c +++ b/ipc/msg.c @@ -98,20 +98,15 @@ void recompute_msgmni(struct ipc_namespace *ns) if (allowed < MSGMNI) { ns->msg_ctlmni = MSGMNI; - goto out_callback; + return; } if (allowed > IPCMNI / nb_ns) { ns->msg_ctlmni = IPCMNI / nb_ns; - goto out_callback; + return; } ns->msg_ctlmni = allowed; - -out_callback: - - printk(KERN_INFO "msgmni has been set to %d for ipc namespace %p\n", - ns->msg_ctlmni, ns); } void msg_init_ns(struct ipc_namespace *ns) @@ -136,6 +131,10 @@ void msg_exit_ns(struct ipc_namespace *ns) void __init msg_init(void) { msg_init_ns(&init_ipc_ns); + + printk(KERN_INFO "msgmni has been set to %d\n", + init_ipc_ns.msg_ctlmni); + ipc_init_proc_interface("sysvipc/msg", " key msqid perms cbytes qnum lspid lrpid uid gid cuid cgid stime rtime ctime\n", IPC_MSG_IDS, sysvipc_msg_proc_show); -- cgit v0.10.2 From 81c6ce9bd3ed3a88caeb9ed97d874450d53339dc Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 5 Jun 2008 22:46:38 -0700 Subject: vt: fix vc_resize locking Lockdep says we can't take tasklist lock or sighand lock inside ctrl_lock. Signed-off-by: Nick Piggin Acked-by: Alan Cox Cc: Oleg Nesterov Cc: "Eric W. Biederman" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/vt.c b/drivers/char/vt.c index b8b2498..935f1c2 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -909,7 +909,7 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) if (vc->vc_tty) { struct winsize ws, *cws = &vc->vc_tty->winsize; - unsigned long flags; + struct pid *pgrp = NULL; memset(&ws, 0, sizeof(ws)); ws.ws_row = vc->vc_rows; @@ -917,11 +917,14 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) ws.ws_ypixel = vc->vc_scan_lines; mutex_lock(&vc->vc_tty->termios_mutex); - spin_lock_irqsave(&vc->vc_tty->ctrl_lock, flags); - if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col) && - vc->vc_tty->pgrp) + spin_lock_irq(&vc->vc_tty->ctrl_lock); + if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col)) + pgrp = get_pid(vc->vc_tty->pgrp); + spin_unlock_irq(&vc->vc_tty->ctrl_lock); + if (pgrp) { kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1); - spin_unlock_irqrestore(&vc->vc_tty->ctrl_lock, flags); + put_pid(pgrp); + } *cws = ws; mutex_unlock(&vc->vc_tty->termios_mutex); } -- cgit v0.10.2 From 9c81c5c95c00c35a328e1757ca45a66647105f6c Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 5 Jun 2008 22:46:39 -0700 Subject: atmel_serial: filter out FP during baud rate detection I made a change to u-boot that used the FP (Fractional Part) field of BRGR to achieve more accurate baud rate generation. Unfortunately, the atmel_serial driver looks at the whole BRGR register when trying to detect the baud rate that the port is currently running at, so setting FP to a nonzero value breaks the baud rate detection. I'll sit on the u-boot patch for a while longer, but this is clearly a bug in the atmel_serial driver which should be fixed. Signed-off-by: Haavard Skinnemoen Acked-by: Andrew Victor Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c index c065a70..42be8b0 100644 --- a/drivers/serial/atmel_serial.c +++ b/drivers/serial/atmel_serial.c @@ -1318,7 +1318,7 @@ static void __init atmel_console_get_options(struct uart_port *port, int *baud, * If the baud rate generator isn't running, the port wasn't * initialized by the boot loader. */ - quot = UART_GET_BRGR(port); + quot = UART_GET_BRGR(port) & ATMEL_US_CD; if (!quot) return; -- cgit v0.10.2 From 3b2d38b48b5abb6921ac6ad2d080ce82887cdbc7 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 5 Jun 2008 22:46:41 -0700 Subject: h8300: fix typo in header guard Signed-off-by: Vegard Nossum Cc: Yoshinori Sato Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-h8300/cacheflush.h b/include/asm-h8300/cacheflush.h index 71210d1..5ffdca2 100644 --- a/include/asm-h8300/cacheflush.h +++ b/include/asm-h8300/cacheflush.h @@ -3,7 +3,7 @@ */ #ifndef _ASM_H8300_CACHEFLUSH_H -#define _AMS_H8300_CACHEFLUSH_H +#define _ASM_H8300_CACHEFLUSH_H /* * Cache handling functions -- cgit v0.10.2 From 4fd5a433d4887f0a6c766c258ca335100ffe208a Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 5 Jun 2008 22:46:42 -0700 Subject: v850: fix typo in header guard Signed-off-by: Vegard Nossum Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h index 2b622ad..c389691 100644 --- a/include/asm-v850/clinkage.h +++ b/include/asm-v850/clinkage.h @@ -11,7 +11,7 @@ * Written by Miles Bader */ -#ifndef __CLINKAGE_H__ +#ifndef __V850_CLINKAGE_H__ #define __V850_CLINKAGE_H__ #include -- cgit v0.10.2 From 1502cb361666808acb1dfd92238fc2b7a7a48221 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 5 Jun 2008 22:46:42 -0700 Subject: MAINTAINERS: reiserfs entry is out of date Signed-off-by: Alan Cox Cc: Edward Shishkin Cc: Jeff Mahoney Cc: Chris Mason Cc: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 46fa179..ae1dab8 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3439,10 +3439,7 @@ L: rtc-linux@googlegroups.com S: Maintained REISERFS FILE SYSTEM -P: Hans Reiser -M: reiserfs-dev@namesys.com L: reiserfs-devel@vger.kernel.org -W: http://www.namesys.com S: Supported RFKILL -- cgit v0.10.2 From 659179b28f15ab1b1db5f8767090f5e728f115a1 Mon Sep 17 00:00:00 2001 From: Geoff Levand Date: Thu, 5 Jun 2008 22:46:44 -0700 Subject: fbdev: export symbol fb_mode_option Frame buffer and mode setting drivers can be built as modules, so fb_mode_option needs to be exported to support these. Prevents this error: ERROR: "fb_mode_option" [drivers/ps3/ps3av_mod.ko] undefined! Signed-off-by: Geoff Levand Acked-by: Geert Uytterhoeven Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/modedb.c b/drivers/video/modedb.c index d1bbef9..d3c3af5 100644 --- a/drivers/video/modedb.c +++ b/drivers/video/modedb.c @@ -28,6 +28,7 @@ #endif const char *fb_mode_option; +EXPORT_SYMBOL_GPL(fb_mode_option); /* * Standard video mode definitions (taken from XFree86) -- cgit v0.10.2 From 0842b245a8e6c14e3aa49f91018902591d1069b3 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Thu, 5 Jun 2008 22:46:45 -0700 Subject: doc: document the kernel-doc conventions for kernel hackers Provide documentation of the kernel-doc documentation conventions oriented to kernel hackers. Since I figure that there will be more people reading this kernel-doc-nano-HOWTO.txt file who are kernel developers focused on the rest of the kernel, than there will be readers of this file who are documentation developers extracting that embedded kernel-doc documentation, I have taken the liberty of making the new section added here: How to format kernel-doc comments the first section of the kernel-doc-nano-HOWTO.txt file. This first section is intended to introduce, motivate and provide basic usage of the kernel-doc mechanism for kernel hackers developing other portions of the kernel. Signed-off-by: Paul Jackson Acked-by: Randy Dunlap Cc: Alan Cox Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt index 2075c06..0bd3274 100644 --- a/Documentation/kernel-doc-nano-HOWTO.txt +++ b/Documentation/kernel-doc-nano-HOWTO.txt @@ -1,6 +1,105 @@ kernel-doc nano-HOWTO ===================== +How to format kernel-doc comments +--------------------------------- + +In order to provide embedded, 'C' friendly, easy to maintain, +but consistent and extractable documentation of the functions and +data structures in the Linux kernel, the Linux kernel has adopted +a consistent style for documenting functions and their parameters, +and structures and their members. + +The format for this documentation is called the kernel-doc format. +It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file. + +This style embeds the documentation within the source files, using +a few simple conventions. The scripts/kernel-doc perl script, some +SGML templates in Documentation/DocBook, and other tools understand +these conventions, and are used to extract this embedded documentation +into various documents. + +In order to provide good documentation of kernel functions and data +structures, please use the following conventions to format your +kernel-doc comments in Linux kernel source. + +We definitely need kernel-doc formatted documentation for functions +that are exported to loadable modules using EXPORT_SYMBOL. + +We also look to provide kernel-doc formatted documentation for +functions externally visible to other kernel files (not marked +"static"). + +We also recommend providing kernel-doc formatted documentation +for private (file "static") routines, for consistency of kernel +source code layout. But this is lower priority and at the +discretion of the MAINTAINER of that kernel source file. + +Data structures visible in kernel include files should also be +documented using kernel-doc formatted comments. + +The opening comment mark "/**" is reserved for kernel-doc comments. +Only comments so marked will be considered by the kernel-doc scripts, +and any comment so marked must be in kernel-doc format. Do not use +"/**" to be begin a comment block unless the comment block contains +kernel-doc formatted comments. The closing comment marker for +kernel-doc comments can be either "*/" or "**/". + +Kernel-doc comments should be placed just before the function +or data structure being described. + +Example kernel-doc function comment: + +/** + * foobar() - short function description of foobar + * @arg1: Describe the first argument to foobar. + * @arg2: Describe the second argument to foobar. + * One can provide multiple line descriptions + * for arguments. + * + * A longer description, with more discussion of the function foobar() + * that might be useful to those using or modifying it. Begins with + * empty comment line, and may include additional embedded empty + * comment lines. + * + * The longer description can have multiple paragraphs. + **/ + +The first line, with the short description, must be on a single line. + +The @argument descriptions must begin on the very next line following +this opening short function description line, with no intervening +empty comment lines. + +Example kernel-doc data structure comment. + +/** + * struct blah - the basic blah structure + * @mem1: describe the first member of struct blah + * @mem2: describe the second member of struct blah, + * perhaps with more lines and words. + * + * Longer description of this structure. + **/ + +The kernel-doc function comments describe each parameter to the +function, in order, with the @name lines. + +The kernel-doc data structure comments describe each structure member +in the data structure, with the @name lines. + +The longer description formatting is "reflowed", losing your line +breaks. So presenting carefully formatted lists within these +descriptions won't work so well; derived documentation will lose +the formatting. + +See the section below "How to add extractable documentation to your +source files" for more details and notes on how to format kernel-doc +comments. + +Components of the kernel-doc system +----------------------------------- + Many places in the source tree have extractable documentation in the form of block comments above functions. The components of this system are: -- cgit v0.10.2 From d100d148aa48df3b6ad526a48624f906695efe60 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Thu, 5 Jun 2008 22:46:46 -0700 Subject: nommu: fix ksize() abuse The nommu binfmt code uses ksize() for pointers returned from do_mmap() which is wrong. This converts the call-sites to use the nommu specific kobjsize() function which works as expected. Cc: Christoph Lameter Cc: Matt Mackall Acked-by: Paul Mundt Acked-by: David Howells Signed-off-by: Pekka Enberg Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c index ddd35d8..d051a32 100644 --- a/fs/binfmt_elf_fdpic.c +++ b/fs/binfmt_elf_fdpic.c @@ -390,7 +390,7 @@ static int load_elf_fdpic_binary(struct linux_binprm *bprm, } /* expand the stack mapping to use up the entire allocation granule */ - fullsize = ksize((char *) current->mm->start_brk); + fullsize = kobjsize((char *) current->mm->start_brk); if (!IS_ERR_VALUE(do_mremap(current->mm->start_brk, stack_size, fullsize, 0, 0))) stack_size = fullsize; diff --git a/fs/binfmt_flat.c b/fs/binfmt_flat.c index 3b40d45..2cb1acd 100644 --- a/fs/binfmt_flat.c +++ b/fs/binfmt_flat.c @@ -548,7 +548,7 @@ static int load_flat_file(struct linux_binprm * bprm, PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, 0); /* Remap to use all availabe slack region space */ if (realdatastart && (realdatastart < (unsigned long)-4096)) { - reallen = ksize((void *)realdatastart); + reallen = kobjsize((void *)realdatastart); if (reallen > len) { realdatastart = do_mremap(realdatastart, len, reallen, MREMAP_FIXED, realdatastart); @@ -600,7 +600,7 @@ static int load_flat_file(struct linux_binprm * bprm, PROT_READ | PROT_EXEC | PROT_WRITE, MAP_PRIVATE, 0); /* Remap to use all availabe slack region space */ if (textpos && (textpos < (unsigned long) -4096)) { - reallen = ksize((void *)textpos); + reallen = kobjsize((void *)textpos); if (reallen > len) { textpos = do_mremap(textpos, len, reallen, MREMAP_FIXED, textpos); @@ -683,7 +683,7 @@ static int load_flat_file(struct linux_binprm * bprm, */ current->mm->start_brk = datapos + data_len + bss_len; current->mm->brk = (current->mm->start_brk + 3) & ~3; - current->mm->context.end_brk = memp + ksize((void *) memp) - stack_len; + current->mm->context.end_brk = memp + kobjsize((void *) memp) - stack_len; } if (flags & FLAT_FLAG_KTRACE) @@ -790,7 +790,7 @@ static int load_flat_file(struct linux_binprm * bprm, /* zero the BSS, BRK and stack areas */ memset((void*)(datapos + data_len), 0, bss_len + - (memp + ksize((void *) memp) - stack_len - /* end brk */ + (memp + kobjsize((void *) memp) - stack_len - /* end brk */ libinfo->lib_list[id].start_brk) + /* start brk */ stack_len); -- cgit v0.10.2 From 9bb91784de6618c955994b2d5be332fb68c87ef1 Mon Sep 17 00:00:00 2001 From: Josef Bacik Date: Thu, 5 Jun 2008 22:46:47 -0700 Subject: ext3: fix online resize bug There is a bug when we are trying to verify that the reserve inode's double indirect blocks point back to the primary gdt blocks. The fix is obvious, we need to mod the gdb count by the addr's per block. You can verify this with the following test case dd if=/dev/zero of=disk1 seek=1024 count=1 bs=100M losetup /dev/loop1 disk1 pvcreate /dev/loop1 vgcreate loopvg1 /dev/loop1 lvcreate -l 100%VG loopvg1 -n looplv1 mkfs.ext3 -J size=64 -b 1024 /dev/loopvg1/looplv1 mount /dev/loopvg1/looplv1 /mnt/loop dd if=/dev/zero of=disk2 seek=1024 count=1 bs=50M losetup /dev/loop2 disk2 pvcreate /dev/loop2 vgextend loopvg1 /dev/loop2 lvextend -l 100%VG /dev/loopvg1/looplv1 resize2fs /dev/loopvg1/looplv1 without this patch the resize2fs fails, with it the resize2fs succeeds. Signed-off-by: Josef Bacik Acked-by: Andreas Dilger Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ext3/resize.c b/fs/ext3/resize.c index 28cfd0b..77278e9 100644 --- a/fs/ext3/resize.c +++ b/fs/ext3/resize.c @@ -580,7 +580,8 @@ static int reserve_backup_gdb(handle_t *handle, struct inode *inode, } blk = EXT3_SB(sb)->s_sbh->b_blocknr + 1 + EXT3_SB(sb)->s_gdb_count; - data = (__le32 *)dind->b_data + EXT3_SB(sb)->s_gdb_count; + data = (__le32 *)dind->b_data + (EXT3_SB(sb)->s_gdb_count % + EXT3_ADDR_PER_BLOCK(sb)); end = (__le32 *)dind->b_data + EXT3_ADDR_PER_BLOCK(sb); /* Get each reserved primary GDT block and verify it holds backups */ -- cgit v0.10.2 From ec0ced156f930aba24e7527905de294ad929ef65 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 Jun 2008 22:46:48 -0700 Subject: asm-m32r/uaccess.h must #include This patch fixes the following compile error caused by commit 4016a1390d07f15b267eecb20e76a48fd5c524ef (mm/nommu.c: return 0 from kobjsize with invalid objects): /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c: In function 'kobjsize': /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: 'memory_end' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/mm/nommu.c:112: error: for each function it appears in.) The patch also removes now no longer required memory_{start,end} declarations inside access_ok(). Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Cc: Hirokazu Takata Cc: Michael Hennerich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-m32r/uaccess.h b/include/asm-m32r/uaccess.h index bd8c837..1c7047b 100644 --- a/include/asm-m32r/uaccess.h +++ b/include/asm-m32r/uaccess.h @@ -14,6 +14,7 @@ #include #include #include +#include #define VERIFY_READ 0 #define VERIFY_WRITE 1 @@ -106,7 +107,6 @@ static inline void set_fs(mm_segment_t s) #else static inline int access_ok(int type, const void *addr, unsigned long size) { - extern unsigned long memory_start, memory_end; unsigned long val = (unsigned long)addr; return ((val >= memory_start) && ((val + size) < memory_end)); -- cgit v0.10.2 From aabe188565124ee2ed060a072764d6ed34dfa4ed Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Thu, 5 Jun 2008 22:46:50 -0700 Subject: rtc: class driver for ppc_md RTC functions This hooks up the platform-specific [gs]et_rtc_time functions so that kernels using CONFIG_RTC_CLASS have RTC support on most PowerPC platforms. A new driver, and one which we've been shipping in Fedora for a while already, since otherwise RTC support breaks. [akpm@linux-foundation.org: fix Kconfig indenting] Signed-off-by: David Woodhouse Signed-off-by: Paul Mackerras Acked-by: Alessandro Zummo Acked-by: David Brownell Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 6cc2c03..60f8afc 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -534,4 +534,12 @@ config RTC_DRV_RS5C313 help If you say yes here you get support for the Ricoh RS5C313 RTC chips. +config RTC_DRV_PPC + tristate "PowerPC machine dependent RTC support" + depends on PPC_MERGE + help + The PowerPC kernel has machine-specific functions for accessing + the RTC. This exposes that functionality through the generic RTC + class. + endif # RTC_CLASS diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 872f1218f..ebe871c 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -54,3 +54,4 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff --git a/drivers/rtc/rtc-ppc.c b/drivers/rtc/rtc-ppc.c new file mode 100644 index 0000000..c8e97e2 --- /dev/null +++ b/drivers/rtc/rtc-ppc.c @@ -0,0 +1,69 @@ +/* + * RTC driver for ppc_md RTC functions + * + * © 2007 Red Hat, Inc. + * + * Author: David Woodhouse + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + + +#include +#include +#include +#include +#include + +static int ppc_rtc_read_time(struct device *dev, struct rtc_time *tm) +{ + ppc_md.get_rtc_time(tm); + return 0; +} + +static int ppc_rtc_set_time(struct device *dev, struct rtc_time *tm) +{ + return ppc_md.set_rtc_time(tm); +} + +static const struct rtc_class_ops ppc_rtc_ops = { + .set_time = ppc_rtc_set_time, + .read_time = ppc_rtc_read_time, +}; + +static struct rtc_device *rtc; +static struct platform_device *ppc_rtc_pdev; + +static int __init ppc_rtc_init(void) +{ + if (!ppc_md.get_rtc_time || !ppc_md.set_rtc_time) + return -ENODEV; + + ppc_rtc_pdev = platform_device_register_simple("ppc-rtc", 0, NULL, 0); + if (IS_ERR(ppc_rtc_pdev)) + return PTR_ERR(ppc_rtc_pdev); + + rtc = rtc_device_register("ppc_md", &ppc_rtc_pdev->dev, + &ppc_rtc_ops, THIS_MODULE); + if (IS_ERR(rtc)) { + platform_device_unregister(ppc_rtc_pdev); + return PTR_ERR(rtc); + } + + return 0; +} + +static void __exit ppc_rtc_exit(void) +{ + rtc_device_unregister(rtc); + platform_device_unregister(ppc_rtc_pdev); +} + +module_init(ppc_rtc_init); +module_exit(ppc_rtc_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("David Woodhouse "); +MODULE_DESCRIPTION("Generic RTC class driver for PowerPC"); -- cgit v0.10.2 From aed5417593ad125283f35513573282139a8664b5 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 5 Jun 2008 22:46:53 -0700 Subject: proc: calculate the correct /proc/ link count This patch: commit e9720acd728a46cb40daa52c99a979f7c4ff195c Author: Pavel Emelyanov Date: Fri Mar 7 11:08:40 2008 -0800 [NET]: Make /proc/net a symlink on /proc/self/net (v3) introduced a /proc/self/net directory without bumping the corresponding link count for /proc/self. This patch replaces the static link count initializations with a call that counts the number of directory entries in the given pid_entry table whenever it is instantiated, and thus relieves the burden of manually keeping the two in sync. [akpm@linux-foundation.org: cleanup] Acked-by: Eric W. Biederman Cc: Pavel Emelyanov Signed-off-by: Vegard Nossum Cc: "David S. Miller" Cc: Alexey Dobriyan Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/base.c b/fs/proc/base.c index c447e07..3b45537 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -127,6 +127,25 @@ struct pid_entry { NULL, &proc_single_file_operations, \ { .proc_show = &proc_##OTYPE } ) +/* + * Count the number of hardlinks for the pid_entry table, excluding the . + * and .. links. + */ +static unsigned int pid_entry_count_dirs(const struct pid_entry *entries, + unsigned int n) +{ + unsigned int i; + unsigned int count; + + count = 0; + for (i = 0; i < n; ++i) { + if (S_ISDIR(entries[i].mode)) + ++count; + } + + return count; +} + int maps_protect; EXPORT_SYMBOL(maps_protect); @@ -2585,10 +2604,9 @@ static struct dentry *proc_pid_instantiate(struct inode *dir, inode->i_op = &proc_tgid_base_inode_operations; inode->i_fop = &proc_tgid_base_operations; inode->i_flags|=S_IMMUTABLE; - inode->i_nlink = 5; -#ifdef CONFIG_SECURITY - inode->i_nlink += 1; -#endif + + inode->i_nlink = 2 + pid_entry_count_dirs(tgid_base_stuff, + ARRAY_SIZE(tgid_base_stuff)); dentry->d_op = &pid_dentry_operations; @@ -2816,10 +2834,9 @@ static struct dentry *proc_task_instantiate(struct inode *dir, inode->i_op = &proc_tid_base_inode_operations; inode->i_fop = &proc_tid_base_operations; inode->i_flags|=S_IMMUTABLE; - inode->i_nlink = 4; -#ifdef CONFIG_SECURITY - inode->i_nlink += 1; -#endif + + inode->i_nlink = 2 + pid_entry_count_dirs(tid_base_stuff, + ARRAY_SIZE(tid_base_stuff)); dentry->d_op = &pid_dentry_operations; -- cgit v0.10.2 From a4fa7ef037b17f2a3b9b393cb924e571fc04e784 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Thu, 5 Jun 2008 22:46:55 -0700 Subject: hdaps: fix module loading on Thinkpad T61P Adds DMI system identifier for ThinkPad T61. Originally written by Klaus S. Madsen. Taken from http://launchpadlibrarian.net/10864950/hdaps-t61.patch Signed-off-by: Tim Gardner Signed-off-by: maximilian attems Cc: Klaus S. Madsen Cc: Mark M. Hoffman Cc: Jean Delvare Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 88e8965..26df06f 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -522,6 +522,7 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"), -- cgit v0.10.2 From bbcdac0c20aa20d1daad41d9c138102b70e5aae4 Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:58 -0700 Subject: pagemap: return map count, not reference count, in /proc/kpagecount Since pagemap is all about examining pages mapped into processes' memory spaces, it makes sense for kpagecount to return the map counts, not the reference counts. Signed-off-by: Thomas Tuttle Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 32dc14c..5a16090 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -726,7 +726,7 @@ static ssize_t kpagecount_read(struct file *file, char __user *buf, if (!ppage) pcount = 0; else - pcount = atomic_read(&ppage->_count); + pcount = page_mapcount(ppage); if (put_user(pcount, out++)) { ret = -EFAULT; -- cgit v0.10.2 From 4710d1ac4c491dd8a28f57946214c0b5fe73cc87 Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:58 -0700 Subject: pagemap: return EINVAL, not EIO, for unaligned reads of kpagecount or kpageflags If the user tries to read from a position that is not a multiple of 8, or read a number of bytes that is not a multiple of 8, they have passed an invalid argument to read, for the purpose of reading these files. It's not an IO error because we didn't encounter any trouble finding the data they asked for. Signed-off-by: Thomas Tuttle Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/proc_misc.c b/fs/proc/proc_misc.c index 5a16090..7e277f2 100644 --- a/fs/proc/proc_misc.c +++ b/fs/proc/proc_misc.c @@ -716,7 +716,7 @@ static ssize_t kpagecount_read(struct file *file, char __user *buf, pfn = src / KPMSIZE; count = min_t(size_t, count, (max_pfn * KPMSIZE) - src); if (src & KPMMASK || count & KPMMASK) - return -EIO; + return -EINVAL; while (count > 0) { ppage = NULL; @@ -782,7 +782,7 @@ static ssize_t kpageflags_read(struct file *file, char __user *buf, pfn = src / KPMSIZE; count = min_t(unsigned long, count, (max_pfn * KPMSIZE) - src); if (src & KPMMASK || count & KPMMASK) - return -EIO; + return -EINVAL; while (count > 0) { ppage = NULL; -- cgit v0.10.2 From ef421be741a3e56cb89088a7dd4f73cc38739d1b Mon Sep 17 00:00:00 2001 From: Thomas Tuttle Date: Thu, 5 Jun 2008 22:46:59 -0700 Subject: pagemap: add documentation for pagemap Just a quick explanation of the pagemap interface from a userspace point of view, and an example of how to use it (in English, not code). Signed-off-by: Thomas Tuttle Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/vm/pagemap.txt b/Documentation/vm/pagemap.txt new file mode 100644 index 0000000..ce72c0f --- /dev/null +++ b/Documentation/vm/pagemap.txt @@ -0,0 +1,77 @@ +pagemap, from the userspace perspective +--------------------------------------- + +pagemap is a new (as of 2.6.25) set of interfaces in the kernel that allow +userspace programs to examine the page tables and related information by +reading files in /proc. + +There are three components to pagemap: + + * /proc/pid/pagemap. This file lets a userspace process find out which + physical frame each virtual page is mapped to. It contains one 64-bit + value for each virtual page, containing the following data (from + fs/proc/task_mmu.c, above pagemap_read): + + * Bits 0-55 page frame number (PFN) if present + * Bits 0-4 swap type if swapped + * Bits 5-55 swap offset if swapped + * Bits 55-60 page shift (page size = 1< Date: Thu, 5 Jun 2008 22:47:00 -0700 Subject: vm: add kzalloc_node() inline To get zeroed out memory from a particular NUMA node. To be used by sunrpc. Signed-off-by: Jeff Layton Cc: Christoph Lameter Cc: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/slab.h b/include/linux/slab.h index 805ed4b..c2ad350 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -276,6 +276,17 @@ static inline void *kzalloc(size_t size, gfp_t flags) return kmalloc(size, flags | __GFP_ZERO); } +/** + * kzalloc_node - allocate zeroed memory from a particular memory node. + * @size: how many bytes of memory are required. + * @flags: the type of memory to allocate (see kmalloc). + * @node: memory node from which to allocate + */ +static inline void *kzalloc_node(size_t size, gfp_t flags, int node) +{ + return kmalloc_node(size, flags | __GFP_ZERO, node); +} + #ifdef CONFIG_SLABINFO extern const struct seq_operations slabinfo_op; ssize_t slabinfo_write(struct file *, const char __user *, size_t, loff_t *); -- cgit v0.10.2 From e693d71b46e64536581bf4884434fc1b8797e96f Mon Sep 17 00:00:00 2001 From: Eli Collins Date: Sun, 1 Jun 2008 20:24:40 -0700 Subject: KVM: VMX: Clear CR4.VMXE in hardware_disable Clear CR4.VMXE in hardware_disable. There's no reason to leave it set after doing a VMXOFF. VMware Workstation 6.5 checks CR4.VMXE as a proxy for whether the CPU is in VMX mode, so leaving VMXE set means we'll refuse to power on. With this change the user can power on after unloading the kvm-intel module. I tested on kvm-67 and kvm-69. Signed-off-by: Eli Collins Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 96445f3..02efbe7 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -1036,6 +1036,7 @@ static void hardware_enable(void *garbage) static void hardware_disable(void *garbage) { asm volatile (ASM_VMX_VMXOFF : : : "cc"); + write_cr4(read_cr4() & ~X86_CR4_VMXE); } static __init int adjust_vmx_controls(u32 ctl_min, u32 ctl_opt, -- cgit v0.10.2 From eb4e545d4ac82d9018487edb4419b33b9930c857 Mon Sep 17 00:00:00 2001 From: David Sterba Date: Fri, 6 Jun 2008 10:56:35 +0200 Subject: ipwireless: Fix blocked sending Packet sending is driven by two flags, tx_ready and tx_queued. It was possible, that there were queued data for sending and hardware was flagged as blocked but in fact it was not. The tx_queued was indicator but should be really a counter else first fragmented packet resets tx_queued flag, but there may be pending packets which do not get sent. New semantics: tx_ready - set, if hw is ready to send packet, no packet is being transferred right now set the flag right at the place where data are copied into hw memory and not earlier without checking if it was succesful tx_queued - count of enqueued packets, including fragments Tested-by: Michal Rokos Signed-off-by: David Sterba Signed-off-by: Jiri Kosina Signed-off-by: Linus Torvalds diff --git a/drivers/char/pcmcia/ipwireless/hardware.c b/drivers/char/pcmcia/ipwireless/hardware.c index fa9d3c9..ba6340a 100644 --- a/drivers/char/pcmcia/ipwireless/hardware.c +++ b/drivers/char/pcmcia/ipwireless/hardware.c @@ -251,10 +251,11 @@ struct ipw_hardware { int init_loops; struct timer_list setup_timer; + /* Flag if hw is ready to send next packet */ int tx_ready; - struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; - /* True if any packets are queued for transmission */ + /* Count of pending packets to be sent */ int tx_queued; + struct list_head tx_queue[NL_NUM_OF_PRIORITIES]; int rx_bytes_queued; struct list_head rx_queue; @@ -404,6 +405,8 @@ static int do_send_fragment(struct ipw_hardware *hw, const unsigned char *data, spin_lock_irqsave(&hw->spinlock, flags); + hw->tx_ready = 0; + if (hw->hw_version == HW_VERSION_1) { outw((unsigned short) length, hw->base_port + IODWR); @@ -492,6 +495,7 @@ static int do_send_packet(struct ipw_hardware *hw, struct ipw_tx_packet *packet) spin_lock_irqsave(&hw->spinlock, flags); list_add(&packet->queue, &hw->tx_queue[0]); + hw->tx_queued++; spin_unlock_irqrestore(&hw->spinlock, flags); } else { if (packet->packet_callback) @@ -949,12 +953,10 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) unsigned long flags; spin_lock_irqsave(&hw->spinlock, flags); - if (hw->tx_queued && hw->tx_ready != 0) { + if (hw->tx_queued && hw->tx_ready) { int priority; struct ipw_tx_packet *packet = NULL; - hw->tx_ready--; - /* Pick a packet */ for (priority = 0; priority < priority_limit; priority++) { if (!list_empty(&hw->tx_queue[priority])) { @@ -963,6 +965,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) struct ipw_tx_packet, queue); + hw->tx_queued--; list_del(&packet->queue); break; @@ -973,6 +976,7 @@ static int send_pending_packet(struct ipw_hardware *hw, int priority_limit) spin_unlock_irqrestore(&hw->spinlock, flags); return 0; } + spin_unlock_irqrestore(&hw->spinlock, flags); /* Send */ @@ -1063,7 +1067,7 @@ static irqreturn_t ipwireless_handle_v1_interrupt(int irq, if (irqn & IR_TXINTR) { ack |= IR_TXINTR; spin_lock_irqsave(&hw->spinlock, flags); - hw->tx_ready++; + hw->tx_ready = 1; spin_unlock_irqrestore(&hw->spinlock, flags); } /* Received data */ @@ -1170,7 +1174,7 @@ static irqreturn_t ipwireless_handle_v2_v3_interrupt(int irq, if (memrxdone & MEMRX_RX_DONE) { writew(0, &hw->memory_info_regs->memreg_rx_done); spin_lock_irqsave(&hw->spinlock, flags); - hw->tx_ready++; + hw->tx_ready = 1; spin_unlock_irqrestore(&hw->spinlock, flags); tx = 1; } @@ -1234,7 +1238,7 @@ static void send_packet(struct ipw_hardware *hw, int priority, spin_lock_irqsave(&hw->spinlock, flags); list_add_tail(&packet->queue, &hw->tx_queue[priority]); - hw->tx_queued = 1; + hw->tx_queued++; spin_unlock_irqrestore(&hw->spinlock, flags); flush_packets_to_hw(hw); -- cgit v0.10.2 From 8d2d73b9a5c35f2c6abf427afba7888cfc4cc65d Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Wed, 4 Jun 2008 18:42:24 +0300 Subject: KVM: MMU: reschedule during shadow teardown Shadows for large guests can take a long time to tear down, so reschedule occasionally to avoid softlockup warnings. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 7246b60..c2fd6a4 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1858,6 +1858,7 @@ static void free_mmu_pages(struct kvm_vcpu *vcpu) sp = container_of(vcpu->kvm->arch.active_mmu_pages.next, struct kvm_mmu_page, link); kvm_mmu_zap_page(vcpu->kvm, sp); + cond_resched(); } free_page((unsigned long)vcpu->arch.mmu.pae_root); } -- cgit v0.10.2 From ff4b9df877b30b8a371d706d3552999dee450738 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Thu, 5 Jun 2008 00:08:11 -0300 Subject: KVM: IOAPIC: only set remote_irr if interrupt was injected There's a bug in the IOAPIC code for level-triggered interrupts. Its relatively easy to trigger by sharing (virtio-blk + usbtablet was the testcase, initially reported by Gerd von Egidy). The "remote_irr" variable is used to indicate accepted but not yet acked interrupts. Its cleared from the EOI handler. Problem is that the EOI handler clears remote_irr unconditionally, even if it reinjected another pending interrupt. In that case, kvm_ioapic_set_irq() proceeds to ioapic_service() which sets remote_irr even if it failed to inject (since the IRR was high due to EOI reinjection). Since the TMR bit has been cleared by the first EOI, the second one fails to clear remote_irr. End result is interrupt line dead. Fix it by setting remote_irr only if a new pending interrupt has been generated (and the TMR bit for vector in question set). Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c index 4232fd7..98778cb 100644 --- a/virt/kvm/ioapic.c +++ b/virt/kvm/ioapic.c @@ -45,7 +45,7 @@ #else #define ioapic_debug(fmt, arg...) #endif -static void ioapic_deliver(struct kvm_ioapic *vioapic, int irq); +static int ioapic_deliver(struct kvm_ioapic *vioapic, int irq); static unsigned long ioapic_read_indirect(struct kvm_ioapic *ioapic, unsigned long addr, @@ -89,8 +89,8 @@ static void ioapic_service(struct kvm_ioapic *ioapic, unsigned int idx) pent = &ioapic->redirtbl[idx]; if (!pent->fields.mask) { - ioapic_deliver(ioapic, idx); - if (pent->fields.trig_mode == IOAPIC_LEVEL_TRIG) + int injected = ioapic_deliver(ioapic, idx); + if (injected && pent->fields.trig_mode == IOAPIC_LEVEL_TRIG) pent->fields.remote_irr = 1; } if (!pent->fields.trig_mode) @@ -133,7 +133,7 @@ static void ioapic_write_indirect(struct kvm_ioapic *ioapic, u32 val) } } -static void ioapic_inj_irq(struct kvm_ioapic *ioapic, +static int ioapic_inj_irq(struct kvm_ioapic *ioapic, struct kvm_vcpu *vcpu, u8 vector, u8 trig_mode, u8 delivery_mode) { @@ -143,7 +143,7 @@ static void ioapic_inj_irq(struct kvm_ioapic *ioapic, ASSERT((delivery_mode == IOAPIC_FIXED) || (delivery_mode == IOAPIC_LOWEST_PRIORITY)); - kvm_apic_set_irq(vcpu, vector, trig_mode); + return kvm_apic_set_irq(vcpu, vector, trig_mode); } static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, @@ -186,7 +186,7 @@ static u32 ioapic_get_delivery_bitmask(struct kvm_ioapic *ioapic, u8 dest, return mask; } -static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) +static int ioapic_deliver(struct kvm_ioapic *ioapic, int irq) { u8 dest = ioapic->redirtbl[irq].fields.dest_id; u8 dest_mode = ioapic->redirtbl[irq].fields.dest_mode; @@ -195,7 +195,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) u8 trig_mode = ioapic->redirtbl[irq].fields.trig_mode; u32 deliver_bitmask; struct kvm_vcpu *vcpu; - int vcpu_id; + int vcpu_id, r = 0; ioapic_debug("dest=%x dest_mode=%x delivery_mode=%x " "vector=%x trig_mode=%x\n", @@ -204,7 +204,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) deliver_bitmask = ioapic_get_delivery_bitmask(ioapic, dest, dest_mode); if (!deliver_bitmask) { ioapic_debug("no target on destination\n"); - return; + return 0; } switch (delivery_mode) { @@ -216,7 +216,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) vcpu = ioapic->kvm->vcpus[0]; #endif if (vcpu != NULL) - ioapic_inj_irq(ioapic, vcpu, vector, + r = ioapic_inj_irq(ioapic, vcpu, vector, trig_mode, delivery_mode); else ioapic_debug("null lowest prio vcpu: " @@ -234,7 +234,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) deliver_bitmask &= ~(1 << vcpu_id); vcpu = ioapic->kvm->vcpus[vcpu_id]; if (vcpu) { - ioapic_inj_irq(ioapic, vcpu, vector, + r = ioapic_inj_irq(ioapic, vcpu, vector, trig_mode, delivery_mode); } } @@ -246,6 +246,7 @@ static void ioapic_deliver(struct kvm_ioapic *ioapic, int irq) delivery_mode); break; } + return r; } void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) -- cgit v0.10.2 From ebb0e6264c7a65c51feb3575e9edb58eab0cf469 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 20 May 2008 16:21:58 +0300 Subject: KVM: MMU: Fix printk() format string Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/paging_tmpl.h b/arch/x86/kvm/paging_tmpl.h index 156fe10..934c7b6 100644 --- a/arch/x86/kvm/paging_tmpl.h +++ b/arch/x86/kvm/paging_tmpl.h @@ -418,7 +418,7 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gva_t addr, /* mmio */ if (is_error_pfn(pfn)) { - pgprintk("gfn %x is mmio\n", walker.gfn); + pgprintk("gfn %lx is mmio\n", walker.gfn); kvm_release_pfn_clean(pfn); return 1; } -- cgit v0.10.2 From aab2545fdd6641b76af0ae96456c4ca9d1e50dad Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 6 Jun 2008 11:31:39 -0700 Subject: uml: activate_mm: remove the dead PF_BORROWED_MM check use_mm() was changed to use switch_mm() instead of activate_mm(), since then nobody calls (and nobody should call) activate_mm() with PF_BORROWED_MM bit set. As Jeff Dike pointed out, we can also remove the "old != new" check, it is always true. Signed-off-by: Oleg Nesterov Cc: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/aio.c b/fs/aio.c index b5253e7..0fb3117 100644 --- a/fs/aio.c +++ b/fs/aio.c @@ -591,10 +591,6 @@ static void use_mm(struct mm_struct *mm) atomic_inc(&mm->mm_count); tsk->mm = mm; tsk->active_mm = mm; - /* - * Note that on UML this *requires* PF_BORROWED_MM to be set, otherwise - * it won't work. Update it accordingly if you change it here - */ switch_mm(active_mm, mm, tsk); task_unlock(tsk); diff --git a/include/asm-um/mmu_context.h b/include/asm-um/mmu_context.h index 6686fc5..54f42e8 100644 --- a/include/asm-um/mmu_context.h +++ b/include/asm-um/mmu_context.h @@ -22,16 +22,10 @@ extern void force_flush_all(void); static inline void activate_mm(struct mm_struct *old, struct mm_struct *new) { /* - * This is called by fs/exec.c and fs/aio.c. In the first case, for an - * exec, we don't need to do anything as we're called from userspace - * and thus going to use a new host PID. In the second, we're called - * from a kernel thread, and thus need to go doing the mmap's on the - * host. Since they're very expensive, we want to avoid that as far as - * possible. + * This is called by fs/exec.c and sys_unshare() + * when the new ->mm is used for the first time. */ - if (old != new && (current->flags & PF_BORROWED_MM)) - __switch_mm(&new->context.id); - + __switch_mm(&new->context.id); arch_dup_mmap(old, new); } -- cgit v0.10.2 From 3c9155106d589584f67b026ec444e69c4a68d7dc Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 20 May 2008 16:21:13 +0300 Subject: KVM: MMU: Fix is_empty_shadow_page() check The check is only looking at one of two possible empty ptes. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index c2fd6a4..ee3f530 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -658,7 +658,7 @@ static int is_empty_shadow_page(u64 *spt) u64 *end; for (pos = spt, end = pos + PAGE_SIZE / sizeof(u64); pos != end; pos++) - if (*pos != shadow_trap_nonpresent_pte) { + if (is_shadow_present_pte(*pos)) { printk(KERN_ERR "%s: %p %llx\n", __func__, pos, *pos); return 0; -- cgit v0.10.2 From 15e02a3b510aa4ef3d077ebc25eb3cd08b9af034 Mon Sep 17 00:00:00 2001 From: Thara Gopinath Date: Mon, 28 Apr 2008 16:55:01 +0530 Subject: ARM: OMAP: Correcting the gpmc prefetch control register address Correcting the GPMC_PREFETCH_CONTROL register address Signed-off-by: Thara Gopinath Signed-off-by: Tony Lindgren diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 02cede2..dbf68dc 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -42,7 +42,7 @@ #define GPMC_STATUS 0x54 #define GPMC_PREFETCH_CONFIG1 0x1e0 #define GPMC_PREFETCH_CONFIG2 0x1e4 -#define GPMC_PREFETCH_CONTROL 0x1e8 +#define GPMC_PREFETCH_CONTROL 0x1ec #define GPMC_PREFETCH_STATUS 0x1f0 #define GPMC_ECC_CONFIG 0x1f4 #define GPMC_ECC_CONTROL 0x1f8 -- cgit v0.10.2 From 8079ffa0e18baaf2940e52e0c118eef420a473a4 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 6 Jun 2008 21:38:37 -0700 Subject: IB/umem: Avoid sign problems when demoting npages to integer On a 64-bit architecture, if ib_umem_get() is called with a size value that is so big that npages is negative when cast to int, then the length of the page list passed to get_user_pages(), namely min_t(int, npages, PAGE_SIZE / sizeof (struct page *)) will be negative, and get_user_pages() will immediately return 0 (at least since 900cf086, "Be more robust about bad arguments in get_user_pages()"). This leads to an infinite loop in ib_umem_get(), since the code boils down to: while (npages) { ret = get_user_pages(...); npages -= ret; } Fix this by taking the minimum as unsigned longs, so that the value of npages is never truncated. The impact of this bug isn't too severe, since the value of npages is checked against RLIMIT_MEMLOCK, so a process would need to have an astronomical limit or have CAP_IPC_LOCK to be able to trigger this, and such a process could already cause lots of mischief. But it does let buggy userspace code cause a kernel lock-up; for example I hit this with code that passes a negative value into a memory registartion function where it is promoted to a huge u64 value. Cc: Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/umem.c b/drivers/infiniband/core/umem.c index fe78f7d..a1768db 100644 --- a/drivers/infiniband/core/umem.c +++ b/drivers/infiniband/core/umem.c @@ -150,7 +150,7 @@ struct ib_umem *ib_umem_get(struct ib_ucontext *context, unsigned long addr, ret = 0; while (npages) { ret = get_user_pages(current, current->mm, cur_base, - min_t(int, npages, + min_t(unsigned long, npages, PAGE_SIZE / sizeof (struct page *)), 1, !umem->writable, page_list, vma_list); -- cgit v0.10.2 From 5bda27235b24146cf870de663141ee4fbfa8a70b Mon Sep 17 00:00:00 2001 From: Mike Frysinger Date: Sat, 7 Jun 2008 15:03:01 +0800 Subject: Blackfin arch: protect only the SPI bus controller with CONFIG_SPI_BFIN Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index fa4f4e8..5958eec 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -451,9 +451,6 @@ static struct platform_device net2272_bfin_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { @@ -676,6 +673,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -1018,10 +1016,7 @@ static int __init stamp_init(void) #endif platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 9d28415..079389c 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -87,9 +87,6 @@ static struct platform_device smc91x_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -189,6 +186,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -425,9 +423,7 @@ static int __init ezkit_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); -#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index ec05b23..13ae495 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -161,9 +161,6 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { @@ -320,6 +317,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -626,10 +624,8 @@ static int __init stamp_init(void) SSYNC(); #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; #endif diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9a756d1..671f9d6 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -400,9 +400,6 @@ static struct platform_device stamp_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ - #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { @@ -629,6 +626,7 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI controller data */ static struct bfin5xx_spi_master bfin_spi0_info = { .num_chipselect = 8, @@ -939,10 +937,7 @@ static int __init stamp_init(void) #endif platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index d1682bb..af7c211 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -412,8 +412,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) -/* all SPI peripherals info goes here */ #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) /* SPI flash chip (m25p16) */ @@ -481,7 +479,7 @@ static struct bfin5xx_spi_chip spidev_chip_info = { }; #endif -static struct spi_board_info bf54x_spi_board_info[] __initdata = { +static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_MTD_M25P80) \ || defined(CONFIG_MTD_M25P80_MODULE) { @@ -527,6 +525,7 @@ static struct spi_board_info bf54x_spi_board_info[] __initdata = { #endif }; +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -800,10 +799,7 @@ static int __init ezkit_init(void) platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bf54x_spi_board_info, - ARRAY_SIZE(bf54x_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 61d8f76..bc6fede 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -280,7 +280,6 @@ static struct platform_device ezkit_flash_device = { }; #endif -#ifdef CONFIG_SPI_BFIN #if defined(CONFIG_SND_BLACKFIN_AD1836) \ || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) static struct bfin5xx_spi_chip ad1836_spi_chip_info = { @@ -295,8 +294,8 @@ static struct bfin5xx_spi_chip spidev_chip_info = { .bits_per_word = 8, }; #endif -#endif +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* SPI (0) */ static struct resource bfin_spi0_resource[] = { [0] = { @@ -327,6 +326,7 @@ static struct platform_device bfin_spi0_device = { .platform_data = &bfin_spi0_info, /* Passed to driver */ }, }; +#endif static struct spi_board_info bfin_spi_board_info[] __initdata = { #if defined(CONFIG_SND_BLACKFIN_AD1836) \ @@ -537,10 +537,7 @@ static int __init ezkit_init(void) SSYNC(); #endif -#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) - spi_register_board_info(bfin_spi_board_info, - ARRAY_SIZE(bfin_spi_board_info)); -#endif + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -- cgit v0.10.2 From 3b8458a9793a92a6ca3cb24e309f19821bf0d8e5 Mon Sep 17 00:00:00 2001 From: Graf Yang Date: Sat, 7 Jun 2008 15:36:33 +0800 Subject: Blackfin serial driver: fix up tty core set_ldisc API change breakage bug This is the patch that follows Linus's modification about set_ldisc. Graf has built and tested it on BF537 using Linus's git Tree. Signed-off-by: Graf Yang Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index 636b687..f20952c 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -813,15 +813,15 @@ bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) * Enable the IrDA function if tty->ldisc.num is N_IRDA. * In other cases, disable IrDA function. */ -static void bfin_set_ldisc(struct tty_struct *tty) +static void bfin_serial_set_ldisc(struct uart_port *port) { - int line = tty->index; + int line = port->line; unsigned short val; - if (line >= tty->driver->num) + if (line >= port->info->tty->driver->num) return; - switch (tty->ldisc.num) { + switch (port->info->tty->ldisc.num) { case N_IRDA: val = UART_GET_GCTL(&bfin_serial_ports[line]); val |= (IREN | RPOLC); @@ -846,6 +846,7 @@ static struct uart_ops bfin_serial_pops = { .startup = bfin_serial_startup, .shutdown = bfin_serial_shutdown, .set_termios = bfin_serial_set_termios, + .set_ldisc = bfin_serial_set_ldisc, .type = bfin_serial_type, .release_port = bfin_serial_release_port, .request_port = bfin_serial_request_port, @@ -1186,7 +1187,6 @@ static int __init bfin_serial_init(void) ret = uart_register_driver(&bfin_serial_reg); if (ret == 0) { - bfin_serial_reg.tty_driver->set_ldisc = bfin_set_ldisc; ret = platform_driver_register(&bfin_serial_driver); if (ret) { pr_debug("uart register failed\n"); -- cgit v0.10.2 From f751aa125d1843ea4a9a264b451fd5b1639fab20 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Sun, 8 Jun 2008 21:43:10 +0300 Subject: fat_valid_media() isn't for userspace MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 73f20e58b1d586e9f6d3ddc3aad872829aca7743 ("FAT_VALID_MEDIA(): remove pointless test") wrongly added the new fat_valid_media() function to the userspace-visible part of include/linux/msdos_fs.h Move it to the part of include/linux/msdos_fs.h that is not exported to userspace. Reported-by: Onur KĂ¼Ă§Ă¼k Reported-by: S.ÇaÄŸlar Onur Signed-off-by: Adrian Bunk Acked-by: OGAWA Hirofumi Signed-off-by: Linus Torvalds diff --git a/include/linux/msdos_fs.h b/include/linux/msdos_fs.h index b03b274..81cd36b 100644 --- a/include/linux/msdos_fs.h +++ b/include/linux/msdos_fs.h @@ -57,12 +57,6 @@ #define MSDOS_DOT ". " /* ".", padded to MSDOS_NAME chars */ #define MSDOS_DOTDOT ".. " /* "..", padded to MSDOS_NAME chars */ -/* media of boot sector */ -static inline int fat_valid_media(u8 media) -{ - return 0xf8 <= media || media == 0xf0; -} - #define FAT_FIRST_ENT(s, x) ((MSDOS_SB(s)->fat_bits == 32 ? 0x0FFFFF00 : \ MSDOS_SB(s)->fat_bits == 16 ? 0xFF00 : 0xF00) | (x)) @@ -334,6 +328,12 @@ static inline void fatwchar_to16(__u8 *dst, const wchar_t *src, size_t len) #endif } +/* media of boot sector */ +static inline int fat_valid_media(u8 media) +{ + return 0xf8 <= media || media == 0xf0; +} + /* fat/cache.c */ extern void fat_cache_inval_inode(struct inode *inode); extern int fat_get_cluster(struct inode *inode, int cluster, -- cgit v0.10.2 From efa58fbf19fb778a8ad2fd000a6dfa9c75263a37 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 22 May 2008 03:38:28 +1000 Subject: [POWERPC] boot/Makefile CONFIG_ variable fixes This corrects the names of two CONFIG_ variables. Note that the CONFIG_MPC86XADS fix uncovers another bug (with mpc866_ads_defconfig) that will require fixing: <-- snip --> ... arch/powerpc/boot/dtc -O dtb -o arch/powerpc/boot/mpc866ads.dtb -b 0 /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts DTC: dts->dtb on file "/home/bunk/linux/kernel-2.6/git/linux-2.6/arch/powerpc/boot/dts/mpc866ads.dts" WRAP arch/powerpc/boot/cuImage.mpc866ads powerpc64-linux-ld: arch/powerpc/boot/cuboot-mpc866ads.o: No such file: No such file or directory make[2]: *** [arch/powerpc/boot/cuImage.mpc866ads] Error 1 <-- snip --> Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index f5e0b2a..d53b84e 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -221,8 +221,8 @@ image-$(CONFIG_WARP) += cuImage.warp image-$(CONFIG_YOSEMITE) += cuImage.yosemite # Board ports in arch/powerpc/platform/8xx/Kconfig -image-$(CONFIG_PPC_MPC86XADS) += cuImage.mpc866ads -image-$(CONFIG_PPC_MPC885ADS) += cuImage.mpc885ads +image-$(CONFIG_MPC86XADS) += cuImage.mpc866ads +image-$(CONFIG_MPC885ADS) += cuImage.mpc885ads image-$(CONFIG_PPC_EP88XC) += dtbImage.ep88xc image-$(CONFIG_PPC_ADDER875) += cuImage.adder875-uboot \ dtbImage.adder875-redboot -- cgit v0.10.2 From 0be234a46596cd19eb56d2cf46836de8221afb6b Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Mon, 2 Jun 2008 16:22:59 +1000 Subject: [POWERPC] Fix incorrect enabling of VMX when building signal or user context When building a signal or a ucontext, we can incorrectly set the MSR_VEC bit of the kernel pt_regs->msr before returning to userspace if the task -ever- used VMX. This can lead to funny result if that stack used it in the past, then "lost" it (ie. it wasn't enabled after a context switch for example) and then called get_context. It can end up with VMX enabled and the registers containing values from some other task. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/signal_64.c b/arch/powerpc/kernel/signal_64.c index faeb8f2..da7c058 100644 --- a/arch/powerpc/kernel/signal_64.c +++ b/arch/powerpc/kernel/signal_64.c @@ -87,6 +87,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, #ifdef CONFIG_ALTIVEC elf_vrreg_t __user *v_regs = (elf_vrreg_t __user *)(((unsigned long)sc->vmx_reserve + 15) & ~0xful); #endif + unsigned long msr = regs->msr; long err = 0; flush_fp_to_thread(current); @@ -102,7 +103,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, /* set MSR_VEC in the MSR value in the frame to indicate that sc->v_reg) * contains valid data. */ - regs->msr |= MSR_VEC; + msr |= MSR_VEC; } /* We always copy to/from vrsave, it's 0 if we don't have or don't * use altivec. @@ -114,6 +115,7 @@ static long setup_sigcontext(struct sigcontext __user *sc, struct pt_regs *regs, err |= __put_user(&sc->gp_regs, &sc->regs); WARN_ON(!FULL_REGS(regs)); err |= __copy_to_user(&sc->gp_regs, regs, GP_REGS_SIZE); + err |= __put_user(msr, &sc->gp_regs[PT_MSR]); err |= __copy_to_user(&sc->fp_regs, ¤t->thread.fpr, FP_REGS_SIZE); err |= __put_user(signr, &sc->signal); err |= __put_user(handler, &sc->handler); -- cgit v0.10.2 From 420b5eeaee5b877829c4f0a514a5ad21448596af Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Tue, 3 Jun 2008 13:36:11 +1000 Subject: [POWERPC] Use dev_set_name in pci_64.c During the next merge window, pci_name()'s return value will become const, so use the new dev_set_name() instead to avoid the warning (from linux-next): arch/powerpc/kernel/pci_64.c: In function 'of_create_pci_dev': arch/powerpc/kernel/pci_64.c:193: warning: passing argument 1 of 'sprintf' discards qualifiers from pointer target type Cc: Kay Sievers Cc: Greg KH Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c index 5275074..30eedfc 100644 --- a/arch/powerpc/kernel/pci_64.c +++ b/arch/powerpc/kernel/pci_64.c @@ -189,7 +189,7 @@ struct pci_dev *of_create_pci_dev(struct device_node *node, dev->cfg_size = pci_cfg_space_size(dev); - sprintf(pci_name(dev), "%04x:%02x:%02x.%d", pci_domain_nr(bus), + dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus), dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn)); dev->class = get_int_prop(node, "class-code", 0); dev->revision = get_int_prop(node, "revision-id", 0); -- cgit v0.10.2 From 0d5799449f0f373ca12681d86c941ae464146a37 Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 4 Jun 2008 08:30:54 +1000 Subject: [POWERPC] Make walk_memory_resource available with MEMORY_HOTPLUG=n The ehea driver was recently changed[1] to use walk_memory_resource() to detect the system's memory layout. However, walk_memory_resource() is available only when memory hotplug is enabled. So CONFIG_EHEA was made to depend on MEMORY_HOTPLUG [2], but it is inappropriate for a network driver to have such a dependency. Make the declaration of walk_memory_resource() and its powerpc implementation (ehea is powerpc-specific) unconditionally available. [1] 48cfb14f8b89d4d5b3df6c16f08b258686fb12ad "ehea: Add DLPAR memory remove support" [2] fb7b6ca2b6b7c23b52be143bdd5f55a23b9780c8 "ehea: Add dependency to Kconfig" Signed-off-by: Nathan Lynch Acked-by: Badari Pulavarty Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c index f67e118..51f82d8 100644 --- a/arch/powerpc/mm/mem.c +++ b/arch/powerpc/mm/mem.c @@ -151,6 +151,7 @@ out: return ret; } #endif /* CONFIG_MEMORY_HOTREMOVE */ +#endif /* CONFIG_MEMORY_HOTPLUG */ /* * walk_memory_resource() needs to make sure there is no holes in a given @@ -184,8 +185,6 @@ walk_memory_resource(unsigned long start_pfn, unsigned long nr_pages, void *arg, } EXPORT_SYMBOL_GPL(walk_memory_resource); -#endif /* CONFIG_MEMORY_HOTPLUG */ - void show_mem(void) { unsigned long total = 0, reserved = 0; diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h index 73e3586..ea9f5ad 100644 --- a/include/linux/memory_hotplug.h +++ b/include/linux/memory_hotplug.h @@ -77,14 +77,6 @@ extern int __add_pages(struct zone *zone, unsigned long start_pfn, extern int __remove_pages(struct zone *zone, unsigned long start_pfn, unsigned long nr_pages); -/* - * Walk through all memory which is registered as resource. - * arg is (start_pfn, nr_pages, private_arg_pointer) - */ -extern int walk_memory_resource(unsigned long start_pfn, - unsigned long nr_pages, void *arg, - int (*func)(unsigned long, unsigned long, void *)); - #ifdef CONFIG_NUMA extern int memory_add_physaddr_to_nid(u64 start); #else @@ -199,6 +191,14 @@ static inline void register_page_bootmem_info_node(struct pglist_data *pgdat) #endif /* ! CONFIG_MEMORY_HOTPLUG */ +/* + * Walk through all memory which is registered as resource. + * arg is (start_pfn, nr_pages, private_arg_pointer) + */ +extern int walk_memory_resource(unsigned long start_pfn, + unsigned long nr_pages, void *arg, + int (*func)(unsigned long, unsigned long, void *)); + extern int add_memory(int nid, u64 start, u64 size); extern int arch_add_memory(int nid, u64 start, u64 size); extern int remove_memory(u64 start, u64 size); -- cgit v0.10.2 From 60d5019be8acef268f4676d229c490186d338fbc Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Wed, 4 Jun 2008 08:31:28 +1000 Subject: [POWERPC] ehea: Remove dependency on MEMORY_HOTPLUG Now that walk_memory_resource() is available regardless of MEMORY_HOTPLUG's setting, this dependency is not needed. Signed-off-by: Nathan Lynch Acked-by: Jeff Garzik Acked-by: Yasunori Goto Signed-off-by: Paul Mackerras diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index dd0ec9e..f4182cf 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2426,7 +2426,7 @@ config CHELSIO_T3 config EHEA tristate "eHEA Ethernet support" - depends on IBMEBUS && INET && SPARSEMEM && MEMORY_HOTPLUG + depends on IBMEBUS && INET && SPARSEMEM select INET_LRO ---help--- This driver supports the IBM pSeries eHEA ethernet adapter. -- cgit v0.10.2 From 576b91873fc012620fae2b33ddae3fee2fa0a4ef Mon Sep 17 00:00:00 2001 From: "Yusuke.Goda" Date: Wed, 4 Jun 2008 19:22:59 +0900 Subject: sh: Add SH7723 SCIF support Signed-off-by: Yusuke Goda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 566ce79..5559a11 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -16,6 +16,21 @@ static struct plat_sci_port sci_platform_data[] = { { + .mapbase = 0xffe00000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 80, 80, 80, 80 }, + },{ + .mapbase = 0xffe10000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 81, 81, 81, 81 }, + },{ + .mapbase = 0xffe20000, + .flags = UPF_BOOT_AUTOCONF, + .type = PORT_SCIF, + .irqs = { 82, 82, 82, 82 }, + },{ .mapbase = 0xa4e30000, .flags = UPF_BOOT_AUTOCONF, .type = PORT_SCI, -- cgit v0.10.2 From 5bde47bc63a9e8ccf9b1542498e266196b307cc2 Mon Sep 17 00:00:00 2001 From: Nobuhiro Iwamatsu Date: Wed, 4 Jun 2008 17:16:15 +0900 Subject: sh: Fix compile error SH7763 setup code SH7763's setup code use old DECLARE_INTC_DESC. There was a compile error because of this. Signed-off-by: Nobuhiro Iwamatsu Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c index ae2b222..f189a55 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7763.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7763.c @@ -291,8 +291,9 @@ static struct intc_sense_reg irq_sense_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irq_desc, "sh7763-irq", irq_vectors, - NULL, NULL, irq_mask_registers, irq_prio_registers, - irq_sense_registers); + NULL, irq_mask_registers, irq_prio_registers, + irq_sense_registers); + /* External interrupt pins in IRL mode */ static struct intc_vect irl_vectors[] __initdata = { @@ -324,10 +325,10 @@ static struct intc_mask_reg irl7654_mask_registers[] __initdata = { }; static DECLARE_INTC_DESC(intc_irl7654_desc, "sh7763-irl7654", irl_vectors, - NULL, NULL, irl7654_mask_registers, NULL, NULL); + NULL, irl7654_mask_registers, NULL, NULL); static DECLARE_INTC_DESC(intc_irl3210_desc, "sh7763-irl3210", irl_vectors, - NULL, NULL, irl3210_mask_registers, NULL, NULL); + NULL, irl3210_mask_registers, NULL, NULL); #define INTC_ICR0 0xffd00000 #define INTC_INTMSK0 0xffd00044 -- cgit v0.10.2 From 77d11ba993bf1258f242b6a4ee0230aec8c6c8a4 Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Mon, 9 Jun 2008 16:00:32 +0900 Subject: usb: r8a66597-hcd: Add support for SH7723 USB host R8A66597 is similar to SH7723 USB 2.0 Host/Function module. In addition, the USB of SH7366 is compatible with SH7723. It can support SH7723 USB host by changing Kconfig. Signed-off-by: Yoshihiro Shimoda Acked-by: Greg Kroah-Hartman Signed-off-by: Paul Mundt diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 1ef6df3..228797e 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -300,8 +300,8 @@ config USB_R8A66597_HCD module will be called r8a66597-hcd. config SUPERH_ON_CHIP_R8A66597 - boolean "Enable SuperH on-chip USB like the R8A66597" - depends on USB_R8A66597_HCD && CPU_SUBTYPE_SH7366 + boolean "Enable SuperH on-chip R8A66597 USB" + depends on USB_R8A66597_HCD && (CPU_SUBTYPE_SH7366 || CPU_SUBTYPE_SH7723) help - Renesas SuperH processor has USB like the R8A66597. - This driver supported processor is SH7366. + This driver enables support for the on-chip R8A66597 in the + SH7366 and SH7723 processors. -- cgit v0.10.2 From b8858eed87f1f19903ad9224f7228cbe7374ac7e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 5 Jun 2008 21:21:04 +0900 Subject: sh: add resource of USB host for SH7723 Signed-off-by: Yoshihiro Shimoda Signed-off-by: Paul Mundt diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c index 5559a11..a0470f2 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7723.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7723.c @@ -88,9 +88,35 @@ static struct platform_device rtc_device = { .resource = rtc_resources, }; +static struct resource sh7723_usb_host_resources[] = { + [0] = { + .name = "r8a66597_hcd", + .start = 0xa4d80000, + .end = 0xa4d800ff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 65, + .end = 65, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sh7723_usb_host_device = { + .name = "r8a66597_hcd", + .id = 0, + .dev = { + .dma_mask = NULL, /* not use dma */ + .coherent_dma_mask = 0xffffffff, + }, + .num_resources = ARRAY_SIZE(sh7723_usb_host_resources), + .resource = sh7723_usb_host_resources, +}; + static struct platform_device *sh7723_devices[] __initdata = { &sci_device, &rtc_device, + &sh7723_usb_host_device, }; static int __init sh7723_devices_setup(void) -- cgit v0.10.2 From e50901338b23cc173f464ff8e0179c4354d16877 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Mon, 9 Jun 2008 16:49:43 +0900 Subject: sh: Add -mno-fdpic to default flags. Presently the --fdpic specifier and the --isa matching clash when building with FDPIC toolchains. As we have no interest in building the kernel with --fdpic in the first place, always try to add in -mno-fdpic to the default flags. Signed-off-by: Paul Mundt diff --git a/arch/sh/Makefile b/arch/sh/Makefile index 8050b03..fb7b1b1 100644 --- a/arch/sh/Makefile +++ b/arch/sh/Makefile @@ -41,6 +41,8 @@ cflags-$(CONFIG_CPU_SH5) := $(call cc-option,-m5-32media-nofpu,) cflags-$(CONFIG_CPU_BIG_ENDIAN) += -mb cflags-$(CONFIG_CPU_LITTLE_ENDIAN) += -ml +cflags-y += $(call cc-option,-mno-fdpic) + # # -Wa,-isa= tuning implies -Wa,-dsp for the versions of binutils that # support it, while -Wa,-dsp by itself limits the range of usable opcodes -- cgit v0.10.2 From c4ea896476d30514109f61f1a6e0d8e2b201e401 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Tue, 3 Jun 2008 13:36:19 -0500 Subject: [POWERPC] 85xx: MPC85xx MDS - Unconditionally select PHYLIB for board fixups The MPC85xx MDS board requires some board level tweaks of the PHYs that either the eTSEC (gianfar) or UCC ethernet controllers are connected to. Its possible to build the phylib as a module, however this breaks the board level fix ups because phy_read and phy_write are not available if we build as a module. So we unconditionally select PHYLIB to ensure its built into the kernel if we are building in MPC85xx MDS support. This was determined to be the easiest soultion even though it prevents the user from removing PHYLIB support if they decide they don't want it. Signed-off-by: Kumar Gala diff --git a/arch/powerpc/platforms/85xx/Kconfig b/arch/powerpc/platforms/85xx/Kconfig index 7ff29d5..ecbe580 100644 --- a/arch/powerpc/platforms/85xx/Kconfig +++ b/arch/powerpc/platforms/85xx/Kconfig @@ -34,6 +34,7 @@ config MPC85xx_MDS bool "Freescale MPC85xx MDS" select DEFAULT_UIMAGE select QUICC_ENGINE + select PHYLIB help This option enables support for the MPC85xx MDS board -- cgit v0.10.2 From ad16880daae42b4e8e078580812faa216600b05e Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 6 Jun 2008 10:35:13 -0500 Subject: [POWERPC] 85xx: MPC8548CDS - Fix size of PCIe IO space Andrew Klossner pointed out the IO space size was in violation of the alignment requirements for windows on the 85xx. The size should have been 1M (to match u-boot). Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8548cds.dts b/arch/powerpc/boot/dts/mpc8548cds.dts index fa298a8..4811b81 100644 --- a/arch/powerpc/boot/dts/mpc8548cds.dts +++ b/arch/powerpc/boot/dts/mpc8548cds.dts @@ -409,7 +409,7 @@ interrupts = <26 2>; bus-range = <0 255>; ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000 - 0x1000000 0x0 0x0 0xe3000000 0x0 0x8000000>; + 0x1000000 0x0 0x0 0xe3000000 0x0 0x100000>; clock-frequency = <33333333>; #interrupt-cells = <1>; #size-cells = <2>; @@ -428,7 +428,7 @@ 0x1000000 0x0 0x0 0x1000000 0x0 0x0 - 0x0 0x8000000>; + 0x0 0x100000>; }; }; }; -- cgit v0.10.2 From a1072b2597752eafca77a664a1816faf7a43bac8 Mon Sep 17 00:00:00 2001 From: Timur Tabi Date: Tue, 20 May 2008 15:14:18 -0500 Subject: [POWERPC] 8610: Update defconfig for MPC8610 HPCD Update the defconfig for the Freescale MPC8610 HPCD board. Enable module support. Disable support for all NICs except for the on-board ULI526x. Enable support for the Freescale DIU driver. Increase the maximum zone order to 12, so that the DIU driver can allocate physically-contiguous 5MB buffers. Enable SYSV IPC and OSS plugin support, which are needed for some OSS apps. Signed-off-by: Timur Tabi Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/mpc8610_hpcd_defconfig b/arch/powerpc/configs/mpc8610_hpcd_defconfig index 7e5b9ce..5612d40 100644 --- a/arch/powerpc/configs/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:33 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:50:24 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -60,9 +62,10 @@ CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set +CONFIG_LOCALVERSION_AUTO=y # CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set @@ -86,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set CONFIG_KALLSYMS_EXTRA_PASS=y @@ -110,14 +114,22 @@ CONFIG_SLUB=y # CONFIG_PROFILING is not set # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set @@ -151,6 +163,7 @@ CONFIG_PPC_86xx=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set # CONFIG_MPC8641_HPCN is not set +# CONFIG_SBC8641D is not set CONFIG_MPC8610_HPCD=y CONFIG_MPC8610=y # CONFIG_IPIC is not set @@ -199,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -223,12 +238,14 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +255,11 @@ CONFIG_PCI_DEBUG=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -303,8 +320,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -446,6 +465,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -504,6 +524,7 @@ CONFIG_CHR_DEV_SG=y # CONFIG_SCSI_CONSTANTS is not set # CONFIG_SCSI_LOGGING is not set # CONFIG_SCSI_SCAN_ASYNC is not set +CONFIG_SCSI_WAIT_SCAN=m # # SCSI Transports @@ -553,7 +574,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -563,13 +588,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -609,6 +632,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -628,25 +652,9 @@ CONFIG_DUMMY=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set +# CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y -CONFIG_MII=y +# CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -663,64 +671,10 @@ CONFIG_ULI526X=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -# CONFIG_NATSEMI is not set -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_R6040 is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set -CONFIG_NETDEV_1000=y -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set -# CONFIG_IP1000 is not set -# CONFIG_IGB is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_GIANFAR is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set -CONFIG_NETDEV_10000=y -# CONFIG_CHELSIO_T1 is not set -# CONFIG_CHELSIO_T3 is not set -# CONFIG_IXGBE is not set -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -# CONFIG_NETXEN_NIC is not set -# CONFIG_NIU is not set -# CONFIG_MLX4_CORE is not set -# CONFIG_TEHUTI is not set -# CONFIG_BNX2X is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set # @@ -728,6 +682,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -783,6 +738,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -824,13 +780,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -852,9 +801,11 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set # CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -864,19 +815,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -893,12 +838,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -908,7 +863,56 @@ CONFIG_DAB=y # CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=y -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +CONFIG_FB_CFB_FILLRECT=y +CONFIG_FB_CFB_COPYAREA=y +CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +# CONFIG_FB_SYS_FILLRECT is not set +# CONFIG_FB_SYS_COPYAREA is not set +# CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set +# CONFIG_FB_SYS_FOPS is not set +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_CIRRUS is not set +# CONFIG_FB_PM2 is not set +# CONFIG_FB_CYBER2000 is not set +# CONFIG_FB_OF is not set +# CONFIG_FB_CT65550 is not set +# CONFIG_FB_ASILIANT is not set +# CONFIG_FB_IMSTT is not set +# CONFIG_FB_VGA16 is not set +# CONFIG_FB_S1D13XXX is not set +# CONFIG_FB_NVIDIA is not set +# CONFIG_FB_RIVA is not set +# CONFIG_FB_MATROX is not set +# CONFIG_FB_RADEON is not set +# CONFIG_FB_ATY128 is not set +# CONFIG_FB_ATY is not set +# CONFIG_FB_S3 is not set +# CONFIG_FB_SAVAGE is not set +# CONFIG_FB_SIS is not set +# CONFIG_FB_NEOMAGIC is not set +# CONFIG_FB_KYRO is not set +# CONFIG_FB_3DFX is not set +# CONFIG_FB_VOODOO1 is not set +# CONFIG_FB_VT8623 is not set +# CONFIG_FB_TRIDENT is not set +# CONFIG_FB_ARK is not set +# CONFIG_FB_PM3 is not set +CONFIG_FB_FSL_DIU=y +# CONFIG_FB_IBM_GXT4500 is not set +# CONFIG_FB_VIRTUAL is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -922,6 +926,8 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_VGA_CONSOLE=y # CONFIG_VGACON_SOFT_SCROLLBACK is not set CONFIG_DUMMY_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE is not set +# CONFIG_LOGO is not set # # Sound @@ -938,7 +944,7 @@ CONFIG_SND_PCM=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y -# CONFIG_SND_PCM_OSS_PLUGINS is not set +CONFIG_SND_PCM_OSS_PLUGINS=y # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -965,6 +971,7 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1031,14 +1038,14 @@ CONFIG_SND_VERBOSE_PROCFS=y CONFIG_SND_SOC=y # -# SoC Audio support for SuperH -# - -# # ALSA SoC audio for Freescale SOCs # CONFIG_SND_SOC_MPC8610=y CONFIG_SND_SOC_MPC8610_HPCD=y + +# +# SoC Audio for the Texas Instruments OMAP +# CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y @@ -1055,6 +1062,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1063,14 +1072,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1090,7 +1096,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -1134,6 +1139,7 @@ CONFIG_TMPFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -1147,10 +1153,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1234,6 +1239,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1244,6 +1250,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1251,6 +1258,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1261,6 +1269,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1274,9 +1283,11 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_SAMPLES is not set @@ -1284,6 +1295,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1294,48 +1306,80 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 70b3ec3e523fc2370117c0eaf5be80859848f66a Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Mon, 9 Jun 2008 08:53:39 -0500 Subject: [POWERPC] Updated Freescale PPC defconfigs Signed-off-by: Kumar Gala diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 7d18440..5428f9f 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Fri Apr 11 11:10:09 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:21 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -196,7 +201,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -211,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +245,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +255,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -362,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -445,6 +451,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -641,7 +648,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -661,6 +667,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -668,6 +675,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -724,6 +732,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -751,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -762,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -795,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -804,17 +806,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -919,12 +916,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -977,16 +984,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1004,6 +1015,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1023,7 +1035,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1061,6 +1075,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1072,6 +1087,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -1090,6 +1106,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1144,11 +1161,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1168,7 +1182,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1237,7 +1250,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1282,6 +1294,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1302,6 +1315,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1312,6 +1326,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1324,6 +1339,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1335,6 +1351,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1345,51 +1362,81 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index 1f57456..9bc3a03 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:15 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:21 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -247,11 +255,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -299,8 +307,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -361,6 +367,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -444,6 +451,7 @@ CONFIG_MTD_NAND_IDS=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -549,7 +557,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -559,13 +571,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -CONFIG_SATA_FSL=y # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -605,6 +615,7 @@ CONFIG_SATA_FSL=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -698,7 +709,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -718,6 +728,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -725,6 +736,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -781,6 +793,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -808,7 +821,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -819,13 +831,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -852,6 +857,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -861,17 +867,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y # CONFIG_SPI_DEBUG is not set CONFIG_SPI_MASTER=y @@ -976,12 +977,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1034,16 +1045,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1061,6 +1076,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1080,7 +1096,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1118,6 +1136,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -1129,6 +1148,7 @@ CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_PXA2XX is not set # CONFIG_USB_GADGET_M66592 is not set +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -1147,6 +1167,7 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1201,11 +1222,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1225,7 +1243,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1294,7 +1311,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1339,6 +1355,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1351,6 +1368,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1358,6 +1376,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1368,6 +1387,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1380,6 +1400,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1391,6 +1412,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1401,51 +1423,81 @@ CONFIG_SCHED_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 50cceda..1eca26f 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:51 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:22 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -212,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -522,7 +529,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -546,6 +552,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -553,6 +560,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -600,6 +608,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -628,7 +637,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -639,13 +647,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -671,6 +672,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -680,19 +682,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -775,12 +771,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -811,6 +817,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -819,6 +827,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -870,11 +879,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -894,7 +900,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -952,7 +957,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -995,6 +999,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1005,6 +1010,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1012,6 +1018,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1021,6 +1028,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1030,52 +1038,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index ac91302..de95d32 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:16 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:24 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -212,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -239,6 +246,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -248,11 +256,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -300,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -355,6 +361,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -526,7 +533,6 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -550,6 +556,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -557,6 +564,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -613,6 +621,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -653,13 +662,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -686,6 +688,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -695,17 +698,12 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -809,12 +807,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -867,16 +875,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -894,6 +906,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -913,7 +926,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -951,6 +966,7 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -962,6 +978,7 @@ CONFIG_MMC=y CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set # # MMC/SD Host Controller Drivers @@ -972,14 +989,11 @@ CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -999,7 +1013,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1060,7 +1073,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1147,6 +1159,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_ITU_T=y @@ -1157,6 +1170,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1164,6 +1178,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1173,6 +1188,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1182,52 +1198,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index e1de399..b47fc91 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:17 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:25 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -541,7 +548,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -551,13 +562,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set CONFIG_SATA_SIL=y -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -598,6 +607,7 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_WINBOND is not set CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -659,7 +669,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -679,6 +688,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -686,6 +696,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -722,6 +733,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -749,7 +761,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -760,13 +771,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -793,6 +797,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -802,17 +807,12 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -862,12 +862,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -905,16 +915,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -925,6 +939,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -945,6 +960,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -982,10 +998,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1040,11 +1058,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1064,7 +1079,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1126,7 +1140,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1210,6 +1223,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1220,6 +1234,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1227,6 +1242,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1236,6 +1252,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1245,51 +1262,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index b4e39cf..fdac484 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:18 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:26 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -432,6 +438,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -587,7 +594,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -607,6 +613,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -614,6 +621,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -650,6 +658,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -677,7 +686,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -688,13 +696,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -721,6 +722,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -730,17 +732,12 @@ CONFIG_I2C_MPC=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# CONFIG_SPI=y CONFIG_SPI_MASTER=y @@ -790,12 +787,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -833,16 +840,20 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # CONFIG_USB_SL811_HCD is not set @@ -853,6 +864,7 @@ CONFIG_USB_UHCI_HCD=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,6 +885,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -909,10 +922,12 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -967,11 +982,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -991,7 +1003,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1053,7 +1064,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1137,6 +1147,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1147,6 +1158,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1154,6 +1166,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1163,6 +1176,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1172,51 +1186,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index b4e82c0..c82e96e 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:56 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:26 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -471,7 +478,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -491,6 +497,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -498,6 +505,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -544,6 +552,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -571,7 +580,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -582,13 +590,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -614,6 +615,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -623,19 +625,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -718,12 +714,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -754,6 +760,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -762,6 +770,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -813,11 +822,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -837,7 +843,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -895,7 +900,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -936,6 +940,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -946,6 +951,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -953,6 +959,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -962,6 +969,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -971,51 +979,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index d50a96e..20fd9f5 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:36:57 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:27 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -110,12 +113,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,6 +244,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -246,11 +254,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +359,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -520,7 +527,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -544,6 +550,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -551,6 +558,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -598,6 +606,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -626,7 +635,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -637,13 +645,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -669,6 +670,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -678,19 +680,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -773,12 +769,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -809,6 +815,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -817,6 +825,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -868,11 +877,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -892,7 +898,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -950,7 +955,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -993,6 +997,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1003,6 +1008,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1010,6 +1016,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1019,6 +1026,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1028,52 +1036,82 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index f377cde..0f94d9f 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:23 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:28 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -211,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -350,6 +356,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -411,8 +418,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set @@ -459,6 +468,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -503,6 +513,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -537,13 +548,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -552,6 +556,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -561,19 +566,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -646,12 +645,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -680,6 +689,8 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -688,13 +699,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -714,7 +722,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -772,7 +779,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -817,6 +823,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -827,6 +834,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -834,6 +842,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -841,6 +850,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -850,50 +860,80 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index a633176..7c1c7fa 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:24 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:29 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -211,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -345,6 +351,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -352,6 +359,7 @@ CONFIG_BLK_DEV=y CONFIG_BLK_DEV_LOOP=y # CONFIG_BLK_DEV_CRYPTOLOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 @@ -406,8 +414,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y @@ -464,6 +474,16 @@ CONFIG_GFAR_NAPI=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -508,6 +528,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -542,13 +563,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -557,6 +571,8 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -566,19 +582,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -642,6 +652,11 @@ CONFIG_WATCHDOG=y CONFIG_83xx_WDT=y # +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set + +# # Sonics Silicon Backplane # CONFIG_SSB_POSSIBLE=y @@ -651,13 +666,24 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y +# CONFIG_USB_DABUSB is not set # # Graphics support @@ -680,6 +706,14 @@ CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set # CONFIG_HIDRAW is not set + +# +# USB Input Devices +# +CONFIG_USB_HID=y +# CONFIG_USB_HIDINPUT_POWERBOOK is not set +# CONFIG_HID_FF is not set +# CONFIG_USB_HIDDEV is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_ARCH_HAS_OHCI is not set @@ -695,33 +729,83 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set # +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set + +# # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_STORAGE is not set +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -741,7 +825,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -799,7 +882,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -844,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -854,6 +937,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -861,6 +945,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -868,6 +953,7 @@ CONFIG_ENABLE_WARN_DEPRECATED=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -881,50 +967,80 @@ CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 1f15182..1752918 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:38 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:30 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,12 +112,14 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -232,6 +239,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -241,11 +249,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -293,8 +301,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -348,6 +354,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -420,6 +427,7 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -464,6 +472,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -498,13 +507,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -513,6 +515,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -522,19 +525,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -607,12 +604,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -640,13 +647,10 @@ CONFIG_HID=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -659,7 +663,6 @@ CONFIG_HID=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -717,7 +720,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -746,6 +748,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -756,6 +759,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -763,6 +767,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -770,6 +775,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -779,50 +785,80 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 2d0debc..b82bb04 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24 -# Mon Feb 11 16:25:19 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:30 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -68,23 +70,22 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set -# CONFIG_PID_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_FAIR_USER_SCHED=y -# CONFIG_FAIR_CGROUP_SCHED is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -92,6 +93,7 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -109,6 +111,8 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -134,7 +138,6 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support @@ -191,12 +194,13 @@ CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=y CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_HAS_WALK_MEMORY=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -207,16 +211,17 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set # CONFIG_SECCOMP is not set -CONFIG_WANT_DEVICE_TREE=y CONFIG_ISA_DMA_API=y # @@ -229,6 +234,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +244,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +297,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -351,6 +356,8 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -430,17 +437,19 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=32768 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_BLK_DEV_XIP is not set # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set # CONFIG_BLK_DEV_IDEDISK is not set @@ -457,7 +466,7 @@ CONFIG_IDE_PROC_FS=y CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_PLATFORM is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -517,6 +526,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -561,6 +571,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -594,12 +605,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -615,6 +621,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set # CONFIG_WATCHDOG is not set # @@ -627,12 +634,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -660,19 +677,20 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -693,14 +711,11 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set # CONFIG_FUSE_FS is not set @@ -743,15 +758,16 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -790,6 +806,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -800,6 +817,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -807,6 +825,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -817,7 +836,9 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -829,9 +850,9 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FORCED_INLINING=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_BACKTRACE_SELF_TEST is not set # CONFIG_FAULT_INJECTION is not set @@ -841,6 +862,7 @@ CONFIG_FORCED_INLINING=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -852,48 +874,78 @@ CONFIG_FORCED_INLINING=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index b998539..f33fd51 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:25 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:31 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC8540_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -208,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -229,6 +236,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -238,11 +246,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -290,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -419,6 +426,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -463,6 +471,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -494,12 +503,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -528,12 +532,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -561,6 +575,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -569,13 +585,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -595,7 +608,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -652,7 +664,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -691,6 +702,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -701,6 +713,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -708,6 +721,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -718,6 +732,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -730,6 +745,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -740,6 +756,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -750,47 +767,77 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index a9f113b..042a85e 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:03 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:32 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -203,7 +208,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -219,11 +223,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -248,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -257,11 +264,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -332,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -395,6 +405,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -511,13 +526,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -557,6 +570,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -622,7 +636,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -642,6 +655,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -649,6 +663,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -713,6 +728,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -744,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -755,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -788,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -797,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -826,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -875,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -900,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -918,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1005,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1079,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1118,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1145,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1164,7 +1191,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1202,10 +1231,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1257,23 +1288,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set CONFIG_DMADEVICES=y # # DMA Devices # CONFIG_FSL_DMA=y -# CONFIG_FSL_DMA_SELFTEST is not set CONFIG_DMA_ENGINE=y # # DMA Clients # # CONFIG_NET_DMA is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1293,7 +1320,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1363,10 +1389,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1450,9 +1475,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1469,6 +1495,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1479,6 +1506,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1492,6 +1520,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1503,6 +1532,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1513,52 +1543,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 851ac91..e19592b 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:27 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:33 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC8560_ADS=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -210,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -238,6 +245,7 @@ CONFIG_PCI_LEGACY=y CONFIG_PCI_DEBUG=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -247,11 +255,12 @@ CONFIG_PCI_DEBUG=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -299,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -462,7 +469,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -482,6 +488,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -489,6 +496,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -535,6 +543,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -572,12 +581,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -610,12 +614,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -646,6 +660,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -654,14 +670,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -681,7 +694,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -738,7 +750,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -777,6 +788,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -787,6 +799,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -794,6 +807,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -804,6 +818,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -816,6 +831,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -827,6 +843,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -837,49 +854,79 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index 2b866b3..28004e9 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:05 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:34 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,12 +114,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -156,6 +161,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set CONFIG_MPC85xx_MDS=y # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -212,11 +218,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +248,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -249,11 +258,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -301,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -358,6 +366,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -525,7 +534,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -546,6 +554,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -553,6 +562,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -600,6 +610,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -629,7 +640,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -640,13 +650,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -672,6 +675,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -681,19 +685,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -776,12 +774,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -812,6 +820,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -820,6 +830,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -871,11 +882,8 @@ CONFIG_RTC_DRV_DS1374=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -895,7 +903,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -953,7 +960,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -994,6 +1000,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1004,6 +1011,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1011,6 +1019,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1021,6 +1030,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1033,6 +1043,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1045,6 +1056,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -1066,52 +1078,82 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index 53aa6f3..03627cfe 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:06 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:35 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set CONFIG_MPC85xx_DS=y +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -217,11 +223,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -246,6 +254,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -255,11 +264,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -330,8 +340,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -393,6 +405,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -499,7 +512,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -509,13 +526,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -555,6 +570,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -620,7 +636,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -640,6 +655,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -647,6 +663,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -711,6 +728,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -742,7 +760,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -753,13 +770,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -786,6 +796,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -795,19 +806,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -824,13 +829,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -873,14 +898,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -898,6 +926,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -916,27 +945,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1003,6 +1026,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1077,11 +1101,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1116,16 +1140,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1143,6 +1171,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1162,7 +1191,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1200,10 +1231,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1255,11 +1288,8 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1279,7 +1309,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1349,10 +1378,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1436,9 +1464,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1447,6 +1476,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1454,6 +1484,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1464,6 +1495,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1477,6 +1509,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1488,6 +1521,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1498,52 +1532,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index a469fe9..b09f003 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:30 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:36 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -113,6 +116,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -153,6 +157,7 @@ CONFIG_MPC85xx=y CONFIG_MPC85xx_CDS=y # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -208,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -236,6 +243,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -245,11 +253,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -297,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -437,7 +444,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -515,7 +522,6 @@ CONFIG_E1000_NAPI=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -535,6 +541,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -542,6 +549,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -588,6 +596,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -624,12 +633,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -662,12 +666,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -698,6 +712,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -706,14 +722,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -733,7 +746,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -790,7 +802,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -829,6 +840,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -839,6 +851,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -846,6 +859,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -856,6 +870,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -868,6 +883,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -878,6 +894,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -888,48 +905,78 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index 67f6797..24f7f44 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:39 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:37 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,6 +114,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -206,11 +211,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -233,6 +240,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,11 +250,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -294,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -449,7 +456,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -469,6 +475,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -476,6 +483,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -522,6 +530,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -558,12 +567,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -596,12 +600,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -628,14 +642,11 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -648,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -705,7 +715,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -732,6 +741,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -742,6 +752,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -749,6 +760,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -756,6 +768,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -765,48 +778,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index fef6055..655518dc 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:39 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:38 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -112,6 +115,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -152,6 +156,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -207,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -228,6 +235,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -237,11 +245,12 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -289,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -418,6 +425,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -462,6 +470,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -487,17 +496,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -526,12 +529,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -559,6 +572,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -567,6 +582,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -602,11 +618,8 @@ CONFIG_RTC_DRV_M48T59=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -619,7 +632,6 @@ CONFIG_RTC_DRV_M48T59=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -676,7 +688,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -715,6 +726,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -725,6 +737,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -732,6 +745,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -742,6 +756,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -753,6 +768,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -763,6 +779,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_LPAR is not set @@ -784,47 +801,77 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 1d303c4..7804ca1 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:42 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:38 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -114,12 +117,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set @@ -158,6 +163,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set CONFIG_STX_GP3=y # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -215,11 +221,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -243,6 +251,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -252,11 +261,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -304,8 +314,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -418,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=m CONFIG_PARPORT=m CONFIG_PARPORT_PC=m # CONFIG_PARPORT_PC_FIFO is not set @@ -505,7 +514,7 @@ CONFIG_IDE_GENERIC=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -653,7 +662,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -673,6 +681,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -680,6 +689,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -753,6 +763,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -796,13 +807,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m # -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -829,6 +833,7 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -838,19 +843,13 @@ CONFIG_I2C_ALGOBIT=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -920,12 +919,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -973,6 +982,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -981,15 +992,12 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set # CONFIG_AUXDISPLAY is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1009,7 +1017,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1073,7 +1080,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1141,9 +1147,10 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set @@ -1152,6 +1159,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1159,6 +1167,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1169,6 +1178,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1182,6 +1192,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1194,6 +1205,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1204,50 +1216,80 @@ CONFIG_BDI_SWITCH=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index d39ee3b..e0b5559 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:43 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:39 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y # CONFIG_TQM8541 is not set @@ -171,7 +176,6 @@ CONFIG_MPIC=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_CPM2 is not set -CONFIG_PPC_CPM_NEW_BINDING=y # CONFIG_FSL_ULI1575 is not set # @@ -208,11 +212,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -233,6 +239,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -242,11 +249,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -294,8 +302,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -352,6 +358,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -423,6 +430,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -506,7 +514,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -600,7 +608,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -620,6 +627,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -627,6 +635,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -673,6 +682,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -713,13 +723,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -744,6 +747,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -753,19 +757,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -835,12 +833,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -871,6 +879,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -879,14 +889,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -906,7 +913,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -974,7 +980,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1013,6 +1018,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1025,6 +1031,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1032,6 +1039,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1041,6 +1049,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1050,48 +1059,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index cbf6ad2..6f9067b 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:44 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:40 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set CONFIG_TQM8541=y @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index bbff962..03120b5 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:44 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:41 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 63c5ec8..3113257 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:45 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:42 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -87,6 +89,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -151,6 +155,7 @@ CONFIG_MPC85xx=y # CONFIG_MPC85xx_CDS is not set # CONFIG_MPC85xx_MDS is not set # CONFIG_MPC85xx_DS is not set +# CONFIG_KSI8560 is not set # CONFIG_STX_GP3 is not set # CONFIG_TQM8540 is not set # CONFIG_TQM8541 is not set @@ -209,11 +214,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +241,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,11 +251,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -295,8 +304,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -353,6 +360,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -424,6 +432,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -507,7 +516,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -602,7 +611,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -622,6 +630,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -629,6 +638,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -675,6 +685,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -723,13 +734,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -754,6 +758,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -763,19 +768,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -845,12 +844,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -881,6 +890,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -889,14 +900,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -916,7 +924,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -984,7 +991,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1023,6 +1029,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1035,6 +1042,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1042,6 +1050,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1052,6 +1061,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1061,49 +1071,79 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index a3cc94a..6740f2a 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc2 -# Wed Feb 20 12:26:07 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:08 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -75,6 +77,7 @@ CONFIG_FAIR_GROUP_SCHED=y CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set @@ -107,6 +110,8 @@ CONFIG_SLUB=y # CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -131,7 +136,6 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y -# CONFIG_PREEMPT_RCU is not set # # Platform support @@ -194,7 +198,6 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_RCU_TRACE=y CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set @@ -213,11 +216,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -235,6 +240,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,13 +250,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -293,8 +299,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -482,6 +486,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -548,6 +553,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -580,12 +586,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -602,12 +603,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -632,12 +643,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set - -# -# Userspace I/O -# +# CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # @@ -650,7 +659,6 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -708,7 +716,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -751,6 +758,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -761,6 +769,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -768,6 +777,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -778,6 +788,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -788,6 +799,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -798,6 +810,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -811,3 +824,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index 2b1504e..ba2a463 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:09 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:09 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -107,6 +107,7 @@ CONFIG_SLAB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -194,11 +195,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -215,6 +218,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -224,11 +228,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -283,6 +287,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -498,6 +503,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -521,6 +527,7 @@ CONFIG_NETDEV_10000=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -552,12 +559,7 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -574,12 +576,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -603,12 +615,9 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -675,7 +684,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -752,6 +760,7 @@ CONFIG_NLS_UTF8=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -763,6 +772,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -770,6 +780,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -780,6 +791,7 @@ CONFIG_DEBUG_KERNEL=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -791,6 +803,7 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -802,6 +815,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -811,45 +825,75 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 125b476..ac72b48 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:10 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:09 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -108,6 +110,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -212,11 +215,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -234,6 +239,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -243,13 +249,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -292,8 +298,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -481,6 +485,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -505,6 +510,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -537,12 +543,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -559,12 +560,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -588,13 +599,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -607,7 +615,6 @@ CONFIG_DAB=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -665,7 +672,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -708,6 +714,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -718,6 +725,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -725,6 +733,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -735,6 +744,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -745,6 +755,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -755,6 +766,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -767,3 +779,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 22a943a..48434c2c 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:10 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:10 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -91,6 +93,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -118,12 +121,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -223,11 +228,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -251,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -260,11 +268,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -313,8 +321,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IP_VS is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set @@ -329,6 +335,7 @@ CONFIG_NF_CONNTRACK=m # CONFIG_NF_CT_ACCT is not set # CONFIG_NF_CONNTRACK_MARK is not set # CONFIG_NF_CONNTRACK_EVENTS is not set +# CONFIG_NF_CT_PROTO_DCCP is not set CONFIG_NF_CT_PROTO_GRE=m CONFIG_NF_CT_PROTO_SCTP=m # CONFIG_NF_CT_PROTO_UDPLITE is not set @@ -407,6 +414,7 @@ CONFIG_IP_NF_TARGET_REDIRECT=m # CONFIG_IP_NF_TARGET_NETMAP is not set # CONFIG_NF_NAT_SNMP_BASIC is not set CONFIG_NF_NAT_PROTO_GRE=m +CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_TFTP=m @@ -459,8 +467,6 @@ CONFIG_IEEE80211_DEBUG=y CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m CONFIG_IEEE80211_CRYPT_TKIP=m -CONFIG_IEEE80211_SOFTMAC=m -CONFIG_IEEE80211_SOFTMAC_DEBUG=y # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -486,6 +492,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -565,6 +572,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -670,7 +678,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -680,13 +692,11 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set # CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -726,6 +736,7 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -785,7 +796,6 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -805,6 +815,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -812,6 +823,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -886,6 +898,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -913,7 +926,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -924,13 +936,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -957,6 +962,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -966,19 +972,13 @@ CONFIG_SENSORS_EEPROM=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -1048,12 +1048,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1115,12 +1125,14 @@ CONFIG_USB_DEVICE_CLASS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1138,6 +1150,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1159,6 +1172,7 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1202,9 +1216,11 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_MOS7720 is not set # CONFIG_USB_SERIAL_MOS7840 is not set +# CONFIG_USB_SERIAL_MOTOROLA is not set # CONFIG_USB_SERIAL_NAVMAN is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_OTI6858 is not set +# CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set @@ -1238,10 +1254,12 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1293,11 +1311,8 @@ CONFIG_RTC_DRV_RS5C372=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1318,10 +1333,9 @@ CONFIG_FS_MBCACHE=y CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1388,12 +1402,10 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1467,9 +1479,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1481,6 +1494,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1488,6 +1502,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1498,6 +1513,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1510,6 +1526,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1521,6 +1538,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1532,52 +1550,82 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index a3d52e3..066c583 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:11 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:11 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,6 +114,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -209,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -235,6 +241,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -244,11 +251,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -296,8 +303,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -454,7 +459,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -464,7 +472,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -509,6 +516,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -596,7 +604,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -616,6 +623,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -623,6 +631,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -670,6 +679,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -705,12 +715,7 @@ CONFIG_GEN_RTC=y # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -743,12 +748,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -779,6 +794,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -787,14 +804,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -814,7 +828,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -871,7 +884,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -914,6 +926,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -924,6 +937,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -931,6 +945,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -940,6 +955,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -950,48 +966,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index 0264c57..30d7834 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:13 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:12 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,18 +72,16 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -108,6 +108,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -196,11 +197,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -224,6 +227,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -233,11 +237,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -292,6 +296,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -536,7 +541,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -554,6 +558,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -561,6 +566,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -634,6 +640,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -668,12 +675,7 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -690,12 +692,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -722,13 +734,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -798,7 +807,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -877,6 +885,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -889,6 +898,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -896,6 +906,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -906,6 +917,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -918,6 +930,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -929,6 +942,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -938,45 +952,75 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set # CONFIG_CRYPTO_HW is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 9e0dd82..4293c8b 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc9 -# Tue Apr 15 18:07:36 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:14 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -86,6 +88,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -111,12 +114,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -201,7 +206,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y @@ -217,11 +221,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +246,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -249,11 +256,11 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -301,8 +308,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -361,6 +366,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -439,6 +445,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -501,8 +508,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set -# CONFIG_SATA_MV is not set +CONFIG_SATA_PMP=y CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y +# CONFIG_SATA_MV is not set # CONFIG_PATA_PLATFORM is not set # CONFIG_MD is not set # CONFIG_MACINTOSH_DRIVERS is not set @@ -554,6 +563,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -607,6 +617,7 @@ CONFIG_INPUT=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -642,13 +653,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # CONFIG_I2C_MPC=y @@ -658,6 +662,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_TAOS_EVM is not set # CONFIG_I2C_STUB is not set # CONFIG_I2C_TINY_USB is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -667,19 +672,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -757,12 +756,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -810,16 +819,20 @@ CONFIG_USB=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set @@ -828,6 +841,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -873,17 +887,15 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -903,7 +915,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -962,7 +973,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1009,6 +1019,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1027,6 +1038,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1034,6 +1046,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_DEBUG_KERNEL is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -1043,51 +1056,81 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index 2075722..3efab71 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:08 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 09:03:46 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_MPC8560_ADS=y CONFIG_MPC85xx_CDS=y CONFIG_MPC85xx_MDS=y CONFIG_MPC85xx_DS=y +CONFIG_KSI8560=y # CONFIG_STX_GP3 is not set CONFIG_TQM8540=y CONFIG_TQM8541=y @@ -221,11 +227,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -250,6 +258,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -259,11 +268,12 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 +CONFIG_PHYSICAL_ALIGN=0x10000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -334,8 +344,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -397,6 +409,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -503,7 +516,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +CONFIG_SATA_FSL=y +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -513,13 +530,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -559,6 +574,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -625,7 +641,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -646,6 +661,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -653,6 +669,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -717,6 +734,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -750,7 +768,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -761,13 +778,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -794,6 +804,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -803,19 +814,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -832,13 +837,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -881,14 +906,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -906,6 +934,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -924,27 +953,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -1011,6 +1034,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1085,11 +1109,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1124,16 +1148,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set -# CONFIG_USB_EHCI_FSL is not set +CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1151,6 +1179,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1170,7 +1199,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1208,12 +1239,21 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set -# CONFIG_EDAC is not set +CONFIG_EDAC=y + +# +# Reporting subsystems +# +# CONFIG_EDAC_DEBUG is not set +CONFIG_EDAC_MM_EDAC=y +CONFIG_EDAC_MPC85XX=y CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1263,11 +1303,19 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # -# CONFIG_DMADEVICES is not set +# CONFIG_RTC_DRV_PPC is not set +CONFIG_DMADEVICES=y # -# Userspace I/O +# DMA Devices # +CONFIG_FSL_DMA=y +CONFIG_DMA_ENGINE=y + +# +# DMA Clients +# +# CONFIG_NET_DMA is not set # CONFIG_UIO is not set # @@ -1287,7 +1335,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1357,10 +1404,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1444,9 +1490,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1455,6 +1502,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1462,6 +1510,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1472,6 +1521,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1485,6 +1535,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1497,6 +1548,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1507,53 +1559,83 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc8641_hpcn_defconfig b/arch/powerpc/configs/mpc8641_hpcn_defconfig index d01dcdb..4a81715 100644 --- a/arch/powerpc/configs/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:11 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:15 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y CONFIG_KALLSYMS_EXTRA_PASS=y @@ -117,12 +120,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -162,6 +167,7 @@ CONFIG_PPC_86xx=y # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set CONFIG_MPC8641_HPCN=y +# CONFIG_SBC8641D is not set # CONFIG_MPC8610_HPCD is not set CONFIG_MPC8641=y # CONFIG_IPIC is not set @@ -211,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -240,6 +248,8 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +CONFIG_HAS_RAPIDIO=y +# CONFIG_RAPIDIO is not set # # Advanced setup @@ -249,11 +259,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -324,8 +334,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -387,6 +399,7 @@ CONFIG_FW_LOADER=y # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -493,7 +506,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y CONFIG_SATA_AHCI=y +# CONFIG_SATA_SIL24 is not set +# CONFIG_SATA_FSL is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -503,13 +520,11 @@ CONFIG_SATA_AHCI=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set -# CONFIG_SATA_FSL is not set CONFIG_PATA_ALI=y # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set @@ -549,6 +564,7 @@ CONFIG_PATA_ALI=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -614,7 +630,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -634,6 +649,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -641,6 +657,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -705,6 +722,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -736,7 +754,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -747,13 +764,6 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_I2C_CHARDEV is not set # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -780,6 +790,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -789,19 +800,13 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -818,13 +823,33 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set CONFIG_DVB_CORE=m -# CONFIG_DVB_CORE_ATTACH is not set +CONFIG_VIDEO_MEDIA=m + +# +# Multimedia drivers +# +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=m +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA8290=m +CONFIG_MEDIA_TUNER_TDA9887=m +CONFIG_MEDIA_TUNER_TEA5761=m +CONFIG_MEDIA_TUNER_TEA5767=m +CONFIG_MEDIA_TUNER_MT20XX=m +CONFIG_MEDIA_TUNER_XC2028=m +CONFIG_MEDIA_TUNER_XC5000=m CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -867,14 +892,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # # DVB-S (satellite) frontends # -# CONFIG_DVB_STV0299 is not set # CONFIG_DVB_CX24110 is not set # CONFIG_DVB_CX24123 is not set -# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_MT312 is not set -# CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_S5H1420 is not set +# CONFIG_DVB_STV0299 is not set +# CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_VES1X93 is not set +# CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TDA826X is not set +# CONFIG_DVB_TUA6100 is not set # # DVB-T (terrestrial) frontends @@ -892,6 +920,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_DIB3000MC is not set # CONFIG_DVB_DIB7000M is not set # CONFIG_DVB_DIB7000P is not set +# CONFIG_DVB_TDA10048 is not set # # DVB-C (cable) frontends @@ -910,27 +939,21 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set # CONFIG_DVB_S5H1409 is not set +# CONFIG_DVB_AU8522 is not set +# CONFIG_DVB_S5H1411 is not set # -# Tuners/PLL support +# Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set -# CONFIG_DVB_TDA826X is not set -# CONFIG_DVB_TDA827X is not set -# CONFIG_DVB_TDA18271 is not set -# CONFIG_DVB_TUNER_QT1010 is not set -# CONFIG_DVB_TUNER_MT2060 is not set -# CONFIG_DVB_TUNER_MT2266 is not set -# CONFIG_DVB_TUNER_MT2131 is not set # CONFIG_DVB_TUNER_DIB0070 is not set -# CONFIG_DVB_TUNER_XC5000 is not set # -# Miscellaneous devices +# SEC control devices for DVB-S # # CONFIG_DVB_LNBP21 is not set +# CONFIG_DVB_ISL6405 is not set # CONFIG_DVB_ISL6421 is not set -# CONFIG_DVB_TUA6100 is not set CONFIG_DAB=y # CONFIG_USB_DABUSB is not set @@ -997,6 +1020,7 @@ CONFIG_SND_AC97_CODEC=y # CONFIG_SND_AU8810 is not set # CONFIG_SND_AU8820 is not set # CONFIG_SND_AU8830 is not set +# CONFIG_SND_AW2 is not set # CONFIG_SND_AZT3328 is not set # CONFIG_SND_BT87X is not set # CONFIG_SND_CA0106 is not set @@ -1071,11 +1095,11 @@ CONFIG_SND_INTEL8X0=y # CONFIG_SND_SOC is not set # -# SoC Audio support for SuperH +# ALSA SoC audio for Freescale SOCs # # -# ALSA SoC audio for Freescale SOCs +# SoC Audio for the Texas Instruments OMAP # # @@ -1110,16 +1134,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y CONFIG_USB_OHCI_HCD_PPC_OF=y CONFIG_USB_OHCI_HCD_PPC_OF_BE=y @@ -1137,6 +1165,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1156,7 +1185,9 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -1194,10 +1225,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1249,11 +1282,8 @@ CONFIG_RTC_DRV_CMOS=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1273,7 +1303,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1343,10 +1372,9 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y # CONFIG_NFSD_V3 is not set -CONFIG_NFSD_TCP=y +# CONFIG_NFSD_V4 is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1430,9 +1458,10 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m @@ -1441,6 +1470,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1448,6 +1478,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1458,6 +1489,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1471,6 +1503,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1482,6 +1515,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1492,52 +1526,82 @@ CONFIG_DEBUG_INFO=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set CONFIG_CRYPTO_SHA1=m # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_TEST is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 2d831db..46fffbc 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:35 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:16 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -106,6 +108,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -210,11 +213,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -231,6 +236,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_SYSCALL is not set # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -240,13 +246,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -294,8 +300,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -419,6 +423,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -485,6 +490,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -517,12 +523,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -551,12 +552,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -584,6 +595,8 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_ARCH_HAS_HCD is not set # CONFIG_USB_ARCH_HAS_OHCI is not set # CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -592,13 +605,10 @@ CONFIG_USB_SUPPORT=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -620,7 +630,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -678,7 +687,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -722,6 +730,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -733,6 +742,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -740,6 +750,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -748,6 +759,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set # @@ -757,48 +769,78 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index 82151b9..9df7897 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:35 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:17 2008 # # CONFIG_PPC64 is not set @@ -28,6 +28,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -108,6 +110,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y # CONFIG_TINY_SHMEM is not set @@ -219,11 +222,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -241,6 +246,7 @@ CONFIG_FSL_SOC=y # CONFIG_PCI_QSPAN is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -250,13 +256,13 @@ CONFIG_FSL_SOC=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0x80000000 CONFIG_CONSISTENT_START=0xfd000000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -299,8 +305,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -492,6 +496,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -516,6 +521,7 @@ CONFIG_FS_ENET_MDIO_FEC=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -548,12 +554,7 @@ CONFIG_GEN_RTC=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -570,12 +571,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -599,13 +610,10 @@ CONFIG_DAB=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -618,7 +626,6 @@ CONFIG_DAB=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set @@ -676,7 +683,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -719,6 +725,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -729,6 +736,7 @@ CONFIG_ZLIB_INFLATE=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -736,6 +744,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -746,6 +755,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -756,6 +766,7 @@ CONFIG_SCHED_DEBUG=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -766,6 +777,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -778,3 +790,4 @@ CONFIG_DEBUG_INFO=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 1383eb6..bc3bf62 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Mon Mar 24 08:48:36 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:18 2008 # # CONFIG_PPC64 is not set @@ -30,6 +30,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -70,19 +72,17 @@ CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 # CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -# CONFIG_FAIR_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set # CONFIG_NAMESPACES is not set CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -109,6 +109,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -196,11 +197,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -225,6 +228,7 @@ CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -234,11 +238,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00400000 # # Networking @@ -293,6 +297,7 @@ CONFIG_INET6_XFRM_MODE_TRANSPORT=y CONFIG_INET6_XFRM_MODE_TUNNEL=y CONFIG_INET6_XFRM_MODE_BEET=y CONFIG_IPV6_SIT=y +CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IPV6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -513,7 +518,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set # CONFIG_BLK_DEV_IDEDMA is not set -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -593,7 +598,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -611,6 +615,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -618,6 +623,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -692,6 +698,7 @@ CONFIG_SERIO_LIBPS2=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # @@ -726,12 +733,7 @@ CONFIG_HW_RANDOM=y # CONFIG_RAW_DRIVER is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -748,12 +750,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -781,11 +793,14 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # CONFIG_USB_GADGET=y +# CONFIG_USB_GADGET_DEBUG is not set # CONFIG_USB_GADGET_DEBUG_FILES is not set CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_AMD5536UDC is not set @@ -795,6 +810,7 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA2XX is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y +# CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_LH7A40X is not set # CONFIG_USB_GADGET_OMAP is not set @@ -804,6 +820,7 @@ CONFIG_USB_M66592=y CONFIG_USB_GADGET_DUALSPEED=y # CONFIG_USB_ZERO is not set CONFIG_USB_ETH=y +CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_GADGETFS is not set # CONFIG_USB_FILE_STORAGE is not set # CONFIG_USB_G_SERIAL is not set @@ -812,13 +829,10 @@ CONFIG_USB_ETH=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -888,7 +902,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y CONFIG_NFS_V3_ACL=y -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -967,6 +980,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -979,6 +993,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -986,6 +1001,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -996,6 +1012,7 @@ CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_SLUB_DEBUG_ON is not set # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_RT_MUTEXES is not set @@ -1008,6 +1025,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1019,6 +1037,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set # CONFIG_DEBUGGER is not set # CONFIG_KGDB_CONSOLE is not set +# CONFIG_IRQSTACKS is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1028,46 +1047,76 @@ CONFIG_BDI_SWITCH=y # CONFIG_KEYS is not set # CONFIG_SECURITY is not set CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_MANAGER=y -# CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_PCBC=y + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set # CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set CONFIG_PPC_LIB_RHEAP=y +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index f912168..c6b8357 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:15 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:18 2008 # # CONFIG_PPC64 is not set @@ -33,6 +33,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -92,6 +94,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y # CONFIG_EMBEDDED is not set CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y @@ -117,6 +120,7 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -215,11 +219,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -241,6 +247,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -250,13 +257,13 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 CONFIG_CONSISTENT_START=0xff100000 CONFIG_CONSISTENT_SIZE=0x00200000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -304,8 +311,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -364,6 +369,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -435,6 +441,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -519,7 +526,7 @@ CONFIG_BLK_DEV_PDC202XX_NEW=y # CONFIG_BLK_DEV_VIA82CXXX is not set # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -598,7 +605,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_SRP is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set CONFIG_SATA_MV=y @@ -608,7 +618,6 @@ CONFIG_SATA_MV=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -653,6 +662,7 @@ CONFIG_SATA_MV=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set # CONFIG_FUSION is not set @@ -744,7 +754,6 @@ CONFIG_E1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -763,6 +772,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set +# CONFIG_SFC is not set # CONFIG_TR is not set # @@ -770,6 +780,7 @@ CONFIG_NETDEV_10000=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -832,6 +843,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -855,7 +867,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -866,13 +877,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -898,6 +902,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set CONFIG_I2C_MV64XXX=y # @@ -908,19 +913,13 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -990,12 +989,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -1055,11 +1064,13 @@ CONFIG_USB_DEVICEFS=y # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -1074,6 +1085,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1120,10 +1132,12 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -1175,11 +1189,8 @@ CONFIG_RTC_DRV_MAX6900=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1199,7 +1210,6 @@ CONFIG_FS_MBCACHE=y # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1257,7 +1267,6 @@ CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y # CONFIG_NFS_V3 is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1300,6 +1309,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1310,6 +1320,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1317,6 +1328,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1326,6 +1338,7 @@ CONFIG_ENABLE_MUST_CHECK=y # CONFIG_SLUB_STATS is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1336,48 +1349,78 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_SECURITY is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y -# CONFIG_CRYPTO_SEQIV is not set + +# +# Crypto core or helper +# # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +# CONFIG_CRYPTO_CBC is not set +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# # CONFIG_CRYPTO_HMAC is not set # CONFIG_CRYPTO_XCBC is not set -# CONFIG_CRYPTO_NULL is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -# CONFIG_CRYPTO_ECB is not set -# CONFIG_CRYPTO_CBC is not set -# CONFIG_CRYPTO_PCBC is not set -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -# CONFIG_CRYPTO_DES is not set -# CONFIG_CRYPTO_FCRYPT is not set -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# # CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set # CONFIG_CRYPTO_CAST5 is not set # CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_DES is not set +# CONFIG_CRYPTO_FCRYPT is not set # CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# # CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -# CONFIG_CRYPTO_CRC32C is not set -# CONFIG_CRYPTO_CAMELLIA is not set -# CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/sbc8641d_defconfig b/arch/powerpc/configs/sbc8641d_defconfig index 3180125..8227510 100644 --- a/arch/powerpc/configs/sbc8641d_defconfig +++ b/arch/powerpc/configs/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc6 -# Thu Apr 10 18:03:25 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:19 2008 # # CONFIG_PPC64 is not set @@ -32,6 +32,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_GENERIC_LOCKBREAK=y CONFIG_ARCH_HAS_ILOG2_U32=y @@ -90,6 +92,7 @@ CONFIG_INITRAMFS_SOURCE="" CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set @@ -116,12 +119,14 @@ CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -197,7 +202,6 @@ CONFIG_PREEMPT=y # CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m -CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_IOMMU_HELPER is not set CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y @@ -213,11 +217,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set # CONFIG_PM is not set @@ -237,12 +243,14 @@ CONFIG_PCI_DOMAINS=y CONFIG_PCI_SYSCALL=y CONFIG_PCIEPORTBUS=y CONFIG_PCIEAER=y +# CONFIG_PCIEASPM is not set CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -252,11 +260,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -328,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=m CONFIG_INET6_XFRM_MODE_BEET=m # CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set CONFIG_IPV6_SIT=m +CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m # CONFIG_IPV6_MULTIPLE_TABLES is not set +# CONFIG_IPV6_MROUTE is not set # CONFIG_NETLABEL is not set # CONFIG_NETWORK_SECMARK is not set CONFIG_NETFILTER=y @@ -534,6 +544,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -610,6 +621,7 @@ CONFIG_MTD_PHYSMAP_OF=y # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -727,7 +739,6 @@ CONFIG_NETDEV_1000=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -743,6 +754,7 @@ CONFIG_GIANFAR=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # CONFIG_WAN is not set CONFIG_ATM_DRIVERS=y # CONFIG_ATM_DUMMY is not set @@ -825,6 +837,7 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -863,13 +876,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -895,6 +901,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -904,19 +911,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -998,12 +999,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# CONFIG_DAB=y # @@ -1041,6 +1052,8 @@ CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1049,14 +1062,11 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1084,8 +1094,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set CONFIG_OCFS2_FS=m +CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set CONFIG_DNOTIFY=y @@ -1145,7 +1155,6 @@ CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set CONFIG_NFS_V4=y -CONFIG_NFS_DIRECTIO=y # CONFIG_NFSD is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y @@ -1221,6 +1230,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1241,6 +1251,7 @@ CONFIG_HAVE_LMB=y # CONFIG_PRINTK_TIME is not set CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set CONFIG_DEBUG_FS=y @@ -1251,6 +1262,7 @@ CONFIG_DETECT_SOFTLOCKUP=y CONFIG_SCHED_DEBUG=y # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set # CONFIG_DEBUG_SLAB is not set # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set @@ -1262,6 +1274,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set # CONFIG_BOOT_PRINTK_DELAY is not set @@ -1274,6 +1287,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_PAGEALLOC is not set CONFIG_DEBUGGER=y # CONFIG_XMON is not set +# CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1289,54 +1303,84 @@ CONFIG_SECURITY_CAPABILITIES=y # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y + +# +# Crypto core or helper +# CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=y -# CONFIG_CRYPTO_SEQIV is not set CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_NULL=m +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_TEST=m + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +CONFIG_CRYPTO_ECB=m +# CONFIG_CRYPTO_LRW is not set +CONFIG_CRYPTO_PCBC=m +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# CONFIG_CRYPTO_HMAC=y # CONFIG_CRYPTO_XCBC is not set -CONFIG_CRYPTO_NULL=m + +# +# Digest +# +CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MD5=y +CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_SHA1=m CONFIG_CRYPTO_SHA256=m CONFIG_CRYPTO_SHA512=m -CONFIG_CRYPTO_WP512=m # CONFIG_CRYPTO_TGR192 is not set -# CONFIG_CRYPTO_GF128MUL is not set -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=m -# CONFIG_CRYPTO_LRW is not set -# CONFIG_CRYPTO_XTS is not set -# CONFIG_CRYPTO_CTR is not set -# CONFIG_CRYPTO_GCM is not set -# CONFIG_CRYPTO_CCM is not set -# CONFIG_CRYPTO_CRYPTD is not set -CONFIG_CRYPTO_DES=y -# CONFIG_CRYPTO_FCRYPT is not set -CONFIG_CRYPTO_BLOWFISH=m -CONFIG_CRYPTO_TWOFISH=m -CONFIG_CRYPTO_TWOFISH_COMMON=m -CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_WP512=m + +# +# Ciphers +# CONFIG_CRYPTO_AES=m +CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_BLOWFISH=m +# CONFIG_CRYPTO_CAMELLIA is not set CONFIG_CRYPTO_CAST5=m CONFIG_CRYPTO_CAST6=m -CONFIG_CRYPTO_TEA=m -CONFIG_CRYPTO_ARC4=m +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set CONFIG_CRYPTO_KHAZAD=m -CONFIG_CRYPTO_ANUBIS=m -# CONFIG_CRYPTO_SEED is not set # CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +CONFIG_CRYPTO_SERPENT=m +CONFIG_CRYPTO_TEA=m +CONFIG_CRYPTO_TWOFISH=m +CONFIG_CRYPTO_TWOFISH_COMMON=m + +# +# Compression +# CONFIG_CRYPTO_DEFLATE=m -CONFIG_CRYPTO_MICHAEL_MIC=m -CONFIG_CRYPTO_CRC32C=m -# CONFIG_CRYPTO_CAMELLIA is not set -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_AUTHENC=m # CONFIG_CRYPTO_LZO is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index fdbfd39..88f6aa8 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.25-rc7 -# Mon Mar 31 11:37:19 2008 +# Linux kernel version: 2.6.26-rc5 +# Mon Jun 9 08:52:20 2008 # # CONFIG_PPC64 is not set @@ -31,6 +31,8 @@ CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_HARDIRQS=y # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set CONFIG_IRQ_PER_CPU=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y @@ -85,6 +87,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y # CONFIG_KALLSYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,12 +112,14 @@ CONFIG_SLUB=y CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_HAVE_DMA_ATTRS is not set CONFIG_PROC_PAGE_MONITOR=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set @@ -214,11 +219,13 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set # CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y CONFIG_CMDLINE="console=ttyS0,115200" @@ -242,6 +249,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set +# CONFIG_HAS_RAPIDIO is not set # # Advanced setup @@ -251,11 +259,11 @@ CONFIG_PCI_LEGACY=y # # Default settings for advanced configuration options are used # -CONFIG_HIGHMEM_START=0xfe000000 CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_PAGE_OFFSET=0xc0000000 CONFIG_KERNEL_START=0xc0000000 +CONFIG_PHYSICAL_START=0x00000000 CONFIG_TASK_SIZE=0xc0000000 -CONFIG_BOOT_LOAD=0x00800000 # # Networking @@ -298,8 +306,6 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set # CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -358,6 +364,7 @@ CONFIG_MTD_PARTITIONS=y # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set +# CONFIG_MTD_AR7_PARTS is not set # # User Modules And Translation Layers @@ -433,6 +440,7 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set @@ -513,7 +521,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_VIA82CXXX=y # CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDEDMA=y -CONFIG_IDE_ARCH_OBSOLETE_INIT=y +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -638,7 +646,6 @@ CONFIG_R8169=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set # CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set @@ -654,6 +661,7 @@ CONFIG_R8169=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -690,6 +698,7 @@ CONFIG_R8169=y # Character devices # # CONFIG_VT is not set +CONFIG_DEVKMEM=y # CONFIG_SERIAL_NONSTANDARD is not set # CONFIG_NOZOMI is not set @@ -717,7 +726,6 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=y -# CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -728,13 +736,6 @@ CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y # -# I2C Algorithms -# -# CONFIG_I2C_ALGOBIT is not set -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# # I2C Hardware Bus support # # CONFIG_I2C_ALI1535 is not set @@ -761,6 +762,7 @@ CONFIG_I2C_MPC=y # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set # CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_PLATFORM is not set # # Miscellaneous I2C Chip support @@ -770,19 +772,13 @@ CONFIG_I2C_MPC=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -799,12 +795,22 @@ CONFIG_SSB_POSSIBLE=y # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # @@ -841,16 +847,20 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_HCD_PPC_OF is not set # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set @@ -865,6 +875,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -885,6 +896,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -922,10 +934,12 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set CONFIG_RTC_LIB=y @@ -977,11 +991,8 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_PPC is not set # CONFIG_DMADEVICES is not set - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -1002,10 +1013,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_XFS_FS=m # CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y @@ -1138,6 +1148,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set @@ -1150,6 +1161,7 @@ CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_HAVE_LMB=y # # Kernel hacking @@ -1157,6 +1169,7 @@ CONFIG_HAS_DMA=y # CONFIG_PRINTK_TIME is not set # CONFIG_ENABLE_WARN_DEPRECATED is not set # CONFIG_ENABLE_MUST_CHECK is not set +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set @@ -1166,6 +1179,7 @@ CONFIG_HAS_DMA=y # CONFIG_SLUB_STATS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_SAMPLES is not set +# CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1181,3 +1195,4 @@ CONFIG_ASYNC_MEMCPY=y CONFIG_ASYNC_XOR=y # CONFIG_CRYPTO is not set # CONFIG_PPC_CLOCK is not set +# CONFIG_VIRTUALIZATION is not set -- cgit v0.10.2 From 7b1e8795ebfe1705153d1001f2a899119f4d9012 Mon Sep 17 00:00:00 2001 From: Akio Idehara Date: Mon, 9 Jun 2008 22:46:07 +0900 Subject: [ALSA] hda - Fix "alc262_sony_unsol[]" hda_verb array I think that hda_verb array must have "terminator (empty array)". But alc262_sony_unsol[] does not have it. And it causes gcc-4.3's buggy behavior with snd_hda_sequence_write(). Signed-off-by: Akio Idehara Signed-off-by: Takashi Iwai diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 518b7ca..b0a2a26 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8642,6 +8642,7 @@ static struct hda_verb alc262_sony_unsol_verbs[] = { {0x15, AC_VERB_SET_UNSOLICITED_ENABLE, AC_USRSP_EN | ALC880_HP_EVENT}, {0x15, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {} }; /* mute/unmute internal speaker according to the hp jack and mute state */ -- cgit v0.10.2 From 4c0283fc561d79a4f94ab48ec37282e15273d1f8 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Mon, 9 Jun 2008 09:58:42 -0700 Subject: IB/core: Remove IB_DEVICE_SEND_W_INV capability flag In 2.6.26, we added some support for send with invalidate work requests, including a device capability flag to indicate whether a device supports such requests. However, the support was incomplete: the completion structure was not extended with a field for the key contained in incoming send with invalidate requests. Full support for memory management extensions (send with invalidate, local invalidate, fast register through a send queue, etc) is planned for 2.6.27. Since send with invalidate is not very useful by itself, just remove the IB_DEVICE_SEND_W_INV bit before the 2.6.26 final release; we will add an IB_DEVICE_MEM_MGT_EXTENSIONS bit in 2.6.27, which makes things simpler for applications, since they will not have quite as confusing an array of fine-grained bits to check. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/amso1100/c2_rnic.c b/drivers/infiniband/hw/amso1100/c2_rnic.c index 9a054c6..b1441aeb 100644 --- a/drivers/infiniband/hw/amso1100/c2_rnic.c +++ b/drivers/infiniband/hw/amso1100/c2_rnic.c @@ -455,8 +455,7 @@ int __devinit c2_rnic_init(struct c2_dev *c2dev) IB_DEVICE_CURR_QP_STATE_MOD | IB_DEVICE_SYS_IMAGE_GUID | IB_DEVICE_ZERO_STAG | - IB_DEVICE_MEM_WINDOW | - IB_DEVICE_SEND_W_INV); + IB_DEVICE_MEM_WINDOW); /* Allocate the qptr_array */ c2dev->qptr_array = vmalloc(C2_MAX_CQS * sizeof(void *)); diff --git a/include/rdma/ib_verbs.h b/include/rdma/ib_verbs.h index 911a661..31d30b1 100644 --- a/include/rdma/ib_verbs.h +++ b/include/rdma/ib_verbs.h @@ -105,7 +105,6 @@ enum ib_device_cap_flags { */ IB_DEVICE_UD_IP_CSUM = (1<<18), IB_DEVICE_UD_TSO = (1<<19), - IB_DEVICE_SEND_W_INV = (1<<21), }; enum ib_atomic_cap { -- cgit v0.10.2 From d5791d13b1d45542895104edf4b09476d5ad24b0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 9 Jun 2008 10:06:24 -0700 Subject: Fix invalid access errors in blk_lookup_devt Commit 30f2f0eb4bd2c43d10a8b0d872c6e5ad8f31c9a0 ("block: do_mounts - accept root=") extended blk_lookup_devt() to be able to look up partitions that had not yet been registered, but in the process made the assumption that the '&block_class.devices' list only contains disk devices and that you can do 'dev_to_disk(dev)' on them. That isn't actually true. The block_class device list also contains the partitions we've discovered so far, and you can't just do a 'dev_to_disk()' on those. So make sure to only work on devices that block/genhd.c has registered itself, something we can test by checking the 'dev->type' member. This makes the loop in blk_lookup_devt() match the other such loops in this file. [ We may want to do an alternate version that knows to handle _either_ whole-disk devices or partitions, but for now this is the minimal fix for a series of crashes reported by Mariusz Kozlowski in http://lkml.org/lkml/2008/5/25/25 and Ingo in http://lkml.org/lkml/2008/6/9/39 ] Reported-by: Mariusz Kozlowski Reported-by: Ingo Molnar Cc: Neil Brown Cc: Joao Luis Meloni Assirati Acked-by: Kay Sievers Cc: Greg Kroah-Hartman Signed-off-by: Linus Torvalds diff --git a/block/genhd.c b/block/genhd.c index 129ad93..b922d48 100644 --- a/block/genhd.c +++ b/block/genhd.c @@ -660,6 +660,8 @@ dev_t blk_lookup_devt(const char *name, int part) mutex_lock(&block_class_lock); list_for_each_entry(dev, &block_class.devices, node) { + if (dev->type != &disk_type) + continue; if (strcmp(dev->bus_id, name) == 0) { struct gendisk *disk = dev_to_disk(dev); -- cgit v0.10.2 From dfa7e20cc0d1a7a620def4dce97de1ae5375f99b Mon Sep 17 00:00:00 2001 From: Russ Anderson Date: Mon, 9 Jun 2008 11:18:45 -0500 Subject: mm: Minor clean-up of page flags in mm/page_alloc.c Minor source code cleanup of page flags in mm/page_alloc.c. Move the definition of the groups of bits to page-flags.h. The purpose of this clean up is that the next patch will conditionally add a page flag to the groups. Doing that in a header file is cleaner than adding #ifdefs to the C code. Signed-off-by: Russ Anderson Signed-off-by: Linus Torvalds diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h index 590cff3..f31debf 100644 --- a/include/linux/page-flags.h +++ b/include/linux/page-flags.h @@ -306,5 +306,29 @@ static inline void __ClearPageTail(struct page *page) } #endif /* !PAGEFLAGS_EXTENDED */ + +#define PAGE_FLAGS (1 << PG_lru | 1 << PG_private | 1 << PG_locked | \ + 1 << PG_buddy | 1 << PG_writeback | \ + 1 << PG_slab | 1 << PG_swapcache | 1 << PG_active) + +/* + * Flags checked in bad_page(). Pages on the free list should not have + * these flags set. It they are, there is a problem. + */ +#define PAGE_FLAGS_CLEAR_WHEN_BAD (PAGE_FLAGS | 1 << PG_reclaim | 1 << PG_dirty) + +/* + * Flags checked when a page is freed. Pages being freed should not have + * these flags set. It they are, there is a problem. + */ +#define PAGE_FLAGS_CHECK_AT_FREE (PAGE_FLAGS | 1 << PG_reserved) + +/* + * Flags checked when a page is prepped for return by the page allocator. + * Pages being prepped should not have these flags set. It they are, there + * is a problem. + */ +#define PAGE_FLAGS_CHECK_AT_PREP (PAGE_FLAGS | 1 << PG_reserved | 1 << PG_dirty) + #endif /* !__GENERATING_BOUNDS_H */ #endif /* PAGE_FLAGS_H */ diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 8e83f02..2f55295 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -237,16 +237,7 @@ static void bad_page(struct page *page) printk(KERN_EMERG "Trying to fix it up, but a reboot is needed\n" KERN_EMERG "Backtrace:\n"); dump_stack(); - page->flags &= ~(1 << PG_lru | - 1 << PG_private | - 1 << PG_locked | - 1 << PG_active | - 1 << PG_dirty | - 1 << PG_reclaim | - 1 << PG_slab | - 1 << PG_swapcache | - 1 << PG_writeback | - 1 << PG_buddy ); + page->flags &= ~PAGE_FLAGS_CLEAR_WHEN_BAD; set_page_count(page, 0); reset_page_mapcount(page); page->mapping = NULL; @@ -463,16 +454,7 @@ static inline int free_pages_check(struct page *page) (page->mapping != NULL) | (page_get_page_cgroup(page) != NULL) | (page_count(page) != 0) | - (page->flags & ( - 1 << PG_lru | - 1 << PG_private | - 1 << PG_locked | - 1 << PG_active | - 1 << PG_slab | - 1 << PG_swapcache | - 1 << PG_writeback | - 1 << PG_reserved | - 1 << PG_buddy )))) + (page->flags & PAGE_FLAGS_CHECK_AT_FREE))) bad_page(page); if (PageDirty(page)) __ClearPageDirty(page); @@ -616,17 +598,7 @@ static int prep_new_page(struct page *page, int order, gfp_t gfp_flags) (page->mapping != NULL) | (page_get_page_cgroup(page) != NULL) | (page_count(page) != 0) | - (page->flags & ( - 1 << PG_lru | - 1 << PG_private | - 1 << PG_locked | - 1 << PG_active | - 1 << PG_dirty | - 1 << PG_slab | - 1 << PG_swapcache | - 1 << PG_writeback | - 1 << PG_reserved | - 1 << PG_buddy )))) + (page->flags & PAGE_FLAGS_CHECK_AT_PREP))) bad_page(page); /* -- cgit v0.10.2 From 326f6a5c9c9e1a62aec37bdc0c3f8d53adabe77b Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Fri, 6 Jun 2008 21:26:02 -0700 Subject: [CPUFREQ] Fix format string bug. Format string bug. Not exploitable, as this is only writable by root, but worth fixing all the same. Spotted-by: Ilja van Sprundel Signed-off-by: Dave Jones diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c index 86f0a24..cc3baf1 100644 --- a/drivers/cpufreq/cpufreq.c +++ b/drivers/cpufreq/cpufreq.c @@ -412,7 +412,7 @@ static int cpufreq_parse_governor(char *str_governor, unsigned int *policy, int ret; mutex_unlock(&cpufreq_governor_mutex); - ret = request_module(name); + ret = request_module("%s", name); mutex_lock(&cpufreq_governor_mutex); if (ret == 0) -- cgit v0.10.2 From ea177305b321a4127e448b88de20d5792682ace1 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Mon, 2 Jun 2008 17:51:23 -0400 Subject: ipw2200: queue direct scans When another scan is in progress, a direct scan gets dropped on the floor. However, that direct scan is usually the scan that's really needed by userspace, and gets stomped on by all the broadcast scans the ipw2200 driver issues internally. Make sure the direct scan happens eventually, and as a bonus ensure that the passive scan worker is cleaned up when appropriate. The change of request_passive_scan form a struct work to struct delayed_work is only to make the set_wx_scan() code a bit simpler, it's still only used with a delay of 0 to match previous behavior. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/ipw2200.c b/drivers/net/wireless/ipw2200.c index 7293367..6e70460 100644 --- a/drivers/net/wireless/ipw2200.c +++ b/drivers/net/wireless/ipw2200.c @@ -1753,6 +1753,8 @@ static int ipw_radio_kill_sw(struct ipw_priv *priv, int disable_radio) if (priv->workqueue) { cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); } queue_work(priv->workqueue, &priv->down); @@ -2005,6 +2007,8 @@ static void ipw_irq_tasklet(struct ipw_priv *priv) wake_up_interruptible(&priv->wait_command_queue); priv->status &= ~(STATUS_ASSOCIATED | STATUS_ASSOCIATING); cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); schedule_work(&priv->link_down); queue_delayed_work(priv->workqueue, &priv->rf_kill, 2 * HZ); @@ -4712,6 +4716,12 @@ static void ipw_rx_notification(struct ipw_priv *priv, priv->status &= ~STATUS_SCAN_FORCED; #endif /* CONFIG_IPW2200_MONITOR */ + /* Do queued direct scans first */ + if (priv->status & STATUS_DIRECT_SCAN_PENDING) { + queue_delayed_work(priv->workqueue, + &priv->request_direct_scan, 0); + } + if (!(priv->status & (STATUS_ASSOCIATED | STATUS_ASSOCIATING | STATUS_ROAMING | @@ -6267,7 +6277,7 @@ static void ipw_add_scan_channels(struct ipw_priv *priv, } } -static int ipw_request_scan_helper(struct ipw_priv *priv, int type) +static int ipw_request_scan_helper(struct ipw_priv *priv, int type, int direct) { struct ipw_scan_request_ext scan; int err = 0, scan_type; @@ -6278,22 +6288,31 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type) mutex_lock(&priv->mutex); + if (direct && (priv->direct_scan_ssid_len == 0)) { + IPW_DEBUG_HC("Direct scan requested but no SSID to scan for\n"); + priv->status &= ~STATUS_DIRECT_SCAN_PENDING; + goto done; + } + if (priv->status & STATUS_SCANNING) { - IPW_DEBUG_HC("Concurrent scan requested. Ignoring.\n"); - priv->status |= STATUS_SCAN_PENDING; + IPW_DEBUG_HC("Concurrent scan requested. Queuing.\n"); + priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING : + STATUS_SCAN_PENDING; goto done; } if (!(priv->status & STATUS_SCAN_FORCED) && priv->status & STATUS_SCAN_ABORTING) { IPW_DEBUG_HC("Scan request while abort pending. Queuing.\n"); - priv->status |= STATUS_SCAN_PENDING; + priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING : + STATUS_SCAN_PENDING; goto done; } if (priv->status & STATUS_RF_KILL_MASK) { - IPW_DEBUG_HC("Aborting scan due to RF Kill activation\n"); - priv->status |= STATUS_SCAN_PENDING; + IPW_DEBUG_HC("Queuing scan due to RF Kill activation\n"); + priv->status |= direct ? STATUS_DIRECT_SCAN_PENDING : + STATUS_SCAN_PENDING; goto done; } @@ -6321,6 +6340,7 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type) cpu_to_le16(20); scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120); + scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20); #ifdef CONFIG_IPW2200_MONITOR if (priv->ieee->iw_mode == IW_MODE_MONITOR) { @@ -6360,13 +6380,23 @@ static int ipw_request_scan_helper(struct ipw_priv *priv, int type) cpu_to_le16(2000); } else { #endif /* CONFIG_IPW2200_MONITOR */ - /* If we are roaming, then make this a directed scan for the - * current network. Otherwise, ensure that every other scan - * is a fast channel hop scan */ - if ((priv->status & STATUS_ROAMING) - || (!(priv->status & STATUS_ASSOCIATED) - && (priv->config & CFG_STATIC_ESSID) - && (le32_to_cpu(scan.full_scan_index) % 2))) { + /* Honor direct scans first, otherwise if we are roaming make + * this a direct scan for the current network. Finally, + * ensure that every other scan is a fast channel hop scan */ + if (direct) { + err = ipw_send_ssid(priv, priv->direct_scan_ssid, + priv->direct_scan_ssid_len); + if (err) { + IPW_DEBUG_HC("Attempt to send SSID command " + "failed\n"); + goto done; + } + + scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN; + } else if ((priv->status & STATUS_ROAMING) + || (!(priv->status & STATUS_ASSOCIATED) + && (priv->config & CFG_STATIC_ESSID) + && (le32_to_cpu(scan.full_scan_index) % 2))) { err = ipw_send_ssid(priv, priv->essid, priv->essid_len); if (err) { IPW_DEBUG_HC("Attempt to send SSID command " @@ -6391,7 +6421,12 @@ send_request: } priv->status |= STATUS_SCANNING; - priv->status &= ~STATUS_SCAN_PENDING; + if (direct) { + priv->status &= ~STATUS_DIRECT_SCAN_PENDING; + priv->direct_scan_ssid_len = 0; + } else + priv->status &= ~STATUS_SCAN_PENDING; + queue_delayed_work(priv->workqueue, &priv->scan_check, IPW_SCAN_CHECK_WATCHDOG); done: @@ -6402,15 +6437,22 @@ done: static void ipw_request_passive_scan(struct work_struct *work) { struct ipw_priv *priv = - container_of(work, struct ipw_priv, request_passive_scan); - ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE); + container_of(work, struct ipw_priv, request_passive_scan.work); + ipw_request_scan_helper(priv, IW_SCAN_TYPE_PASSIVE, 0); } static void ipw_request_scan(struct work_struct *work) { struct ipw_priv *priv = container_of(work, struct ipw_priv, request_scan.work); - ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE); + ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 0); +} + +static void ipw_request_direct_scan(struct work_struct *work) +{ + struct ipw_priv *priv = + container_of(work, struct ipw_priv, request_direct_scan.work); + ipw_request_scan_helper(priv, IW_SCAN_TYPE_ACTIVE, 1); } static void ipw_bg_abort_scan(struct work_struct *work) @@ -9477,99 +9519,38 @@ static int ipw_wx_get_retry(struct net_device *dev, return 0; } -static int ipw_request_direct_scan(struct ipw_priv *priv, char *essid, - int essid_len) -{ - struct ipw_scan_request_ext scan; - int err = 0, scan_type; - - if (!(priv->status & STATUS_INIT) || - (priv->status & STATUS_EXIT_PENDING)) - return 0; - - mutex_lock(&priv->mutex); - - if (priv->status & STATUS_RF_KILL_MASK) { - IPW_DEBUG_HC("Aborting scan due to RF kill activation\n"); - priv->status |= STATUS_SCAN_PENDING; - goto done; - } - - IPW_DEBUG_HC("starting request direct scan!\n"); - - if (priv->status & (STATUS_SCANNING | STATUS_SCAN_ABORTING)) { - /* We should not sleep here; otherwise we will block most - * of the system (for instance, we hold rtnl_lock when we - * get here). - */ - err = -EAGAIN; - goto done; - } - memset(&scan, 0, sizeof(scan)); - - if (priv->config & CFG_SPEED_SCAN) - scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] = - cpu_to_le16(30); - else - scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_SCAN] = - cpu_to_le16(20); - - scan.dwell_time[IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN] = - cpu_to_le16(20); - scan.dwell_time[IPW_SCAN_PASSIVE_FULL_DWELL_SCAN] = cpu_to_le16(120); - scan.dwell_time[IPW_SCAN_ACTIVE_DIRECT_SCAN] = cpu_to_le16(20); - - scan.full_scan_index = cpu_to_le32(ieee80211_get_scans(priv->ieee)); - - err = ipw_send_ssid(priv, essid, essid_len); - if (err) { - IPW_DEBUG_HC("Attempt to send SSID command failed\n"); - goto done; - } - scan_type = IPW_SCAN_ACTIVE_BROADCAST_AND_DIRECT_SCAN; - - ipw_add_scan_channels(priv, &scan, scan_type); - - err = ipw_send_scan_request_ext(priv, &scan); - if (err) { - IPW_DEBUG_HC("Sending scan command failed: %08X\n", err); - goto done; - } - - priv->status |= STATUS_SCANNING; - - done: - mutex_unlock(&priv->mutex); - return err; -} - static int ipw_wx_set_scan(struct net_device *dev, struct iw_request_info *info, union iwreq_data *wrqu, char *extra) { struct ipw_priv *priv = ieee80211_priv(dev); struct iw_scan_req *req = (struct iw_scan_req *)extra; + struct delayed_work *work = NULL; mutex_lock(&priv->mutex); + priv->user_requested_scan = 1; - mutex_unlock(&priv->mutex); if (wrqu->data.length == sizeof(struct iw_scan_req)) { if (wrqu->data.flags & IW_SCAN_THIS_ESSID) { - ipw_request_direct_scan(priv, req->essid, - req->essid_len); - return 0; - } - if (req->scan_type == IW_SCAN_TYPE_PASSIVE) { - queue_work(priv->workqueue, - &priv->request_passive_scan); - return 0; + int len = min((int)req->essid_len, + (int)sizeof(priv->direct_scan_ssid)); + memcpy(priv->direct_scan_ssid, req->essid, len); + priv->direct_scan_ssid_len = len; + work = &priv->request_direct_scan; + } else if (req->scan_type == IW_SCAN_TYPE_PASSIVE) { + work = &priv->request_passive_scan; } + } else { + /* Normal active broadcast scan */ + work = &priv->request_scan; } + mutex_unlock(&priv->mutex); + IPW_DEBUG_WX("Start scan\n"); - queue_delayed_work(priv->workqueue, &priv->request_scan, 0); + queue_delayed_work(priv->workqueue, work, 0); return 0; } @@ -10731,6 +10712,8 @@ static void ipw_link_up(struct ipw_priv *priv) } cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); ipw_reset_stats(priv); /* Ensure the rate is updated immediately */ @@ -10761,6 +10744,8 @@ static void ipw_link_down(struct ipw_priv *priv) /* Cancel any queued work ... */ cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->adhoc_check); cancel_delayed_work(&priv->gather_stats); @@ -10800,8 +10785,9 @@ static int __devinit ipw_setup_deferred_work(struct ipw_priv *priv) INIT_WORK(&priv->up, ipw_bg_up); INIT_WORK(&priv->down, ipw_bg_down); INIT_DELAYED_WORK(&priv->request_scan, ipw_request_scan); + INIT_DELAYED_WORK(&priv->request_direct_scan, ipw_request_direct_scan); + INIT_DELAYED_WORK(&priv->request_passive_scan, ipw_request_passive_scan); INIT_DELAYED_WORK(&priv->scan_event, ipw_scan_event); - INIT_WORK(&priv->request_passive_scan, ipw_request_passive_scan); INIT_DELAYED_WORK(&priv->gather_stats, ipw_bg_gather_stats); INIT_WORK(&priv->abort_scan, ipw_bg_abort_scan); INIT_WORK(&priv->roam, ipw_bg_roam); @@ -11835,6 +11821,8 @@ static void __devexit ipw_pci_remove(struct pci_dev *pdev) cancel_delayed_work(&priv->adhoc_check); cancel_delayed_work(&priv->gather_stats); cancel_delayed_work(&priv->request_scan); + cancel_delayed_work(&priv->request_direct_scan); + cancel_delayed_work(&priv->request_passive_scan); cancel_delayed_work(&priv->scan_event); cancel_delayed_work(&priv->rf_kill); cancel_delayed_work(&priv->scan_check); diff --git a/drivers/net/wireless/ipw2200.h b/drivers/net/wireless/ipw2200.h index cd3295b..d4ab28b 100644 --- a/drivers/net/wireless/ipw2200.h +++ b/drivers/net/wireless/ipw2200.h @@ -1037,6 +1037,7 @@ struct ipw_cmd { /* XXX */ #define STATUS_DISASSOC_PENDING (1<<12) #define STATUS_STATE_PENDING (1<<13) +#define STATUS_DIRECT_SCAN_PENDING (1<<19) #define STATUS_SCAN_PENDING (1<<20) #define STATUS_SCANNING (1<<21) #define STATUS_SCAN_ABORTING (1<<22) @@ -1292,6 +1293,8 @@ struct ipw_priv { struct iw_public_data wireless_data; int user_requested_scan; + u8 direct_scan_ssid[IW_ESSID_MAX_SIZE]; + u8 direct_scan_ssid_len; struct workqueue_struct *workqueue; @@ -1301,8 +1304,9 @@ struct ipw_priv { struct work_struct system_config; struct work_struct rx_replenish; struct delayed_work request_scan; + struct delayed_work request_direct_scan; + struct delayed_work request_passive_scan; struct delayed_work scan_event; - struct work_struct request_passive_scan; struct work_struct adapter_restart; struct delayed_work rf_kill; struct work_struct up; -- cgit v0.10.2 From 507b06d0622480f8026d49a94f86068bb0fd6ed6 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 3 Jun 2008 23:39:55 -0400 Subject: mac80211: send association event on IBSS create Otherwise userspace has no idea the IBSS creation succeeded. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 841278f..af375da 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2336,6 +2336,7 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, u8 *pos; struct ieee80211_sub_if_data *sdata; struct ieee80211_supported_band *sband; + union iwreq_data wrqu; sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; @@ -2479,6 +2480,10 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, ifsta->state = IEEE80211_IBSS_JOINED; mod_timer(&ifsta->timer, jiffies + IEEE80211_IBSS_MERGE_INTERVAL); + memset(&wrqu, 0, sizeof(wrqu)); + memcpy(wrqu.ap_addr.sa_data, bss->bssid, ETH_ALEN); + wireless_send_event(dev, SIOCGIWAP, &wrqu, NULL); + return res; } -- cgit v0.10.2 From a01f5450401f081f07a866612121e780e0730cfd Mon Sep 17 00:00:00 2001 From: Holger Schurig Date: Wed, 4 Jun 2008 11:10:40 +0200 Subject: libertas: fix sleep confirmation This fixes an issus that made "iwconfig eth1 power on" non-working. When we get a "PS sleep" event, we have to confirm this to the firmware. The confirm happens with a command, but this command is special: the firmware won't send us a response. if_cs_host_to_card() is setting priv->dnld_sent anyway, so this variable stayed at DNLD_DATA_SENT and was never cleared back. Now I put the special knowledge that the CMD_802_11_PS_MODE with CMD_SUBCMD_SLEEP_CONFIRMED doesn't need to need a response by directly clearing the dnld_sent state in lbs_send_confirmsleep(). Signed-off-by: Holger Schurig Acked-by: Dan Williams Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c index 6328b95..8124fd9 100644 --- a/drivers/net/wireless/libertas/cmd.c +++ b/drivers/net/wireless/libertas/cmd.c @@ -1842,6 +1842,9 @@ static void lbs_send_confirmsleep(struct lbs_private *priv) spin_lock_irqsave(&priv->driver_lock, flags); + /* We don't get a response on the sleep-confirmation */ + priv->dnld_sent = DNLD_RES_RECEIVED; + /* If nothing to do, go back to sleep (?) */ if (!__kfifo_len(priv->event_fifo) && !priv->resp_len[priv->resp_idx]) priv->psstate = PS_STATE_SLEEP; @@ -1904,12 +1907,12 @@ void lbs_ps_confirm_sleep(struct lbs_private *priv) lbs_deb_enter(LBS_DEB_HOST); + spin_lock_irqsave(&priv->driver_lock, flags); if (priv->dnld_sent) { allowed = 0; lbs_deb_host("dnld_sent was set\n"); } - spin_lock_irqsave(&priv->driver_lock, flags); /* In-progress command? */ if (priv->cur_cmd) { allowed = 0; diff --git a/drivers/net/wireless/libertas/main.c b/drivers/net/wireless/libertas/main.c index e1f0660..acfc4bf 100644 --- a/drivers/net/wireless/libertas/main.c +++ b/drivers/net/wireless/libertas/main.c @@ -732,8 +732,8 @@ static int lbs_thread(void *data) lbs_deb_thread("4: currenttxskb %p, dnld_sent %d\n", priv->currenttxskb, priv->dnld_sent); - spin_lock_irq(&priv->driver_lock); /* Process any pending command response */ + spin_lock_irq(&priv->driver_lock); resp_idx = priv->resp_idx; if (priv->resp_len[resp_idx]) { spin_unlock_irq(&priv->driver_lock); -- cgit v0.10.2 From ad81b2f97d42e13ef78bb3798e046cd5f0492980 Mon Sep 17 00:00:00 2001 From: Assaf Krauss Date: Wed, 4 Jun 2008 20:27:59 +0300 Subject: mac80211: Fixing slow IBSS rejoin This patch fixes the issue of slow reconnection to an IBSS cell after disconnection from it. Now the interface's bssid is reset upon ifdown. ieee80211_sta_find_ibss: if (found && memcmp(ifsta->bssid, bssid, ETH_ALEN) != 0 && (bss = ieee80211_rx_bss_get(dev, bssid, local->hw.conf.channel->center_freq, ifsta->ssid, ifsta->ssid_len))) Note: In general disconnection is still not handled properly in mac80211 Signed-off-by: Assaf Krauss Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 5c87645..98c0b5e 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -511,6 +511,7 @@ static int ieee80211_stop(struct net_device *dev) case IEEE80211_IF_TYPE_STA: case IEEE80211_IF_TYPE_IBSS: sdata->u.sta.state = IEEE80211_DISABLED; + memset(sdata->u.sta.bssid, 0, ETH_ALEN); del_timer_sync(&sdata->u.sta.timer); /* * When we get here, the interface is marked down. -- cgit v0.10.2 From d005b1d042a1d5dcd8d898f26d8d9bb03f865284 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 5 Jun 2008 16:55:10 +0200 Subject: zd1211rw: Fix data padding for QoS This patch fixes a data alignment issue in the zd1211rw driver. The IEEE80211_STYPE_QOS_DATA bit should be used as a bitwise test to test for the presence of the 2 byte QoS control field. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/zd1211rw/zd_mac.c b/drivers/net/wireless/zd1211rw/zd_mac.c index 6424e5a..418606a 100644 --- a/drivers/net/wireless/zd1211rw/zd_mac.c +++ b/drivers/net/wireless/zd1211rw/zd_mac.c @@ -719,7 +719,7 @@ int zd_mac_rx(struct ieee80211_hw *hw, const u8 *buffer, unsigned int length) fc = le16_to_cpu(*((__le16 *) buffer)); is_qos = ((fc & IEEE80211_FCTL_FTYPE) == IEEE80211_FTYPE_DATA) && - ((fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_QOS_DATA); + (fc & IEEE80211_STYPE_QOS_DATA); is_4addr = (fc & (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS)) == (IEEE80211_FCTL_TODS | IEEE80211_FCTL_FROMDS); need_padding = is_qos ^ is_4addr; -- cgit v0.10.2 From 872ba53395b2a8be08c3ea2d39e225e5b4a8cb40 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Wed, 4 Jun 2008 13:59:34 -0400 Subject: mac80211: decrease IBSS creation latency Sufficient scans (at least 2 or 3) should have been done within 7 seconds to find an existing IBSS to join. This should improve IBSS creation latency; and since IBSS merging is still in effect, shouldn't have detrimental effects on eventual IBSS convergence. Signed-off-by: Dan Williams Signed-off-by: John W. Linville diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index af375da..affe42f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -44,7 +44,7 @@ #define IEEE80211_RETRY_AUTH_INTERVAL (1 * HZ) #define IEEE80211_SCAN_INTERVAL (2 * HZ) #define IEEE80211_SCAN_INTERVAL_SLOW (15 * HZ) -#define IEEE80211_IBSS_JOIN_TIMEOUT (20 * HZ) +#define IEEE80211_IBSS_JOIN_TIMEOUT (7 * HZ) #define IEEE80211_PROBE_DELAY (HZ / 33) #define IEEE80211_CHANNEL_TIME (HZ / 33) -- cgit v0.10.2 From be038b376465953c358d675cb38a611898a49dc2 Mon Sep 17 00:00:00 2001 From: Assaf Krauss Date: Thu, 5 Jun 2008 19:55:21 +0300 Subject: mac80211: Checking IBSS support while changing channel in ad-hoc mode This patch adds a check to the set_channel flow. When attempting to change the channel while in IBSS mode, and the new channel does not support IBSS mode, the flow return with an error value with no consequences on the mac80211 and driver state. Signed-off-by: Assaf Krauss Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index c7314bf..006486b 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -899,7 +899,7 @@ extern const struct iw_handler_def ieee80211_iw_handler_def; /* ieee80211_ioctl.c */ -int ieee80211_set_freq(struct ieee80211_local *local, int freq); +int ieee80211_set_freq(struct net_device *dev, int freq); /* ieee80211_sta.c */ void ieee80211_sta_timer(unsigned long data); void ieee80211_sta_work(struct work_struct *work); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index affe42f..4d2b582 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2359,13 +2359,10 @@ static int ieee80211_sta_join_ibss(struct net_device *dev, sdata->drop_unencrypted = bss->capability & WLAN_CAPABILITY_PRIVACY ? 1 : 0; - res = ieee80211_set_freq(local, bss->freq); + res = ieee80211_set_freq(dev, bss->freq); - if (local->oper_channel->flags & IEEE80211_CHAN_NO_IBSS) { - printk(KERN_DEBUG "%s: IBSS not allowed on frequency " - "%d MHz\n", dev->name, local->oper_channel->center_freq); - return -1; - } + if (res) + return res; /* Set beacon template */ skb = dev_alloc_skb(local->hw.extra_tx_headroom + 400); @@ -3491,7 +3488,7 @@ static int ieee80211_sta_config_auth(struct net_device *dev, spin_unlock_bh(&local->sta_bss_lock); if (selected) { - ieee80211_set_freq(local, selected->freq); + ieee80211_set_freq(dev, selected->freq); if (!(ifsta->flags & IEEE80211_STA_SSID_SET)) ieee80211_sta_set_ssid(dev, selected->ssid, selected->ssid_len); diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 8311bb2..a8bb8e3 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -290,14 +290,22 @@ static int ieee80211_ioctl_giwmode(struct net_device *dev, return 0; } -int ieee80211_set_freq(struct ieee80211_local *local, int freqMHz) +int ieee80211_set_freq(struct net_device *dev, int freqMHz) { int ret = -EINVAL; struct ieee80211_channel *chan; + struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); chan = ieee80211_get_channel(local->hw.wiphy, freqMHz); if (chan && !(chan->flags & IEEE80211_CHAN_DISABLED)) { + if (sdata->vif.type == IEEE80211_IF_TYPE_IBSS && + chan->flags & IEEE80211_CHAN_NO_IBSS) { + printk(KERN_DEBUG "%s: IBSS not allowed on frequency " + "%d MHz\n", dev->name, chan->center_freq); + return ret; + } local->oper_channel = chan; if (local->sta_sw_scanning || local->sta_hw_scanning) @@ -315,7 +323,6 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev, struct iw_request_info *info, struct iw_freq *freq, char *extra) { - struct ieee80211_local *local = wdev_priv(dev->ieee80211_ptr); struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA) @@ -329,14 +336,14 @@ static int ieee80211_ioctl_siwfreq(struct net_device *dev, IEEE80211_STA_AUTO_CHANNEL_SEL; return 0; } else - return ieee80211_set_freq(local, + return ieee80211_set_freq(dev, ieee80211_channel_to_frequency(freq->m)); } else { int i, div = 1000000; for (i = 0; i < freq->e; i++) div /= 10; if (div > 0) - return ieee80211_set_freq(local, freq->m / div); + return ieee80211_set_freq(dev, freq->m / div); else return -EINVAL; } -- cgit v0.10.2 From 585c5434f0e02ff0ffc567ec223af61e2d8e2e88 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Thu, 5 Jun 2008 21:29:49 +0300 Subject: include/linux/ssb/ssb_driver_gige.h typo fix This patch fixes a typo in the name of a config variable. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Reviewed-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/include/linux/ssb/ssb_driver_gige.h b/include/linux/ssb/ssb_driver_gige.h index 01fbdf5..942e387 100644 --- a/include/linux/ssb/ssb_driver_gige.h +++ b/include/linux/ssb/ssb_driver_gige.h @@ -100,7 +100,7 @@ extern char * nvram_get(const char *name); /* Get the device MAC address */ static inline void ssb_gige_get_macaddr(struct pci_dev *pdev, u8 *macaddr) { -#ifdef CONFIG_BCM947XX +#ifdef CONFIG_BCM47XX char *res = nvram_get("et0macaddr"); if (res) memcpy(macaddr, res, 6); -- cgit v0.10.2 From b6b16196b064bbff83e8161359f8b73465d4aa36 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 8 Jun 2008 13:13:06 +0200 Subject: iwlwifi: fix oops in iwl3945_led_brightness_set fix race between: ieee80211_open->ieee80211_led_radio->led_trigger_event->led_set_brightness->iwl3945_led_brightness_set (which assumes that "led->priv" is not NULL) and iwl3945_pci_probe->iwl3945_setup_deferred_work->(...)->iwl3945_bg_alive_start->iwl3945_alive_start->iwl3945_led_register->iwl3945_led_register_led which sets priv field in struct iwl3945_led after led->led_dev.brightness_set = iwl3945_led_brightness_set; (...) led_classdev_register(device, &led->led_dev); http://kerneloops.org/guilty.php?guilty=iwl3945_led_brightness_set&version=2.6.25-release&start=1671168&end=1703935&class=oops Signed-off-by: Marcin Slusarz Cc: Zhu Yi Cc: Reinette Chatre Cc: Tomas Winkler Cc: linux-wireless@vger.kernel.org Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-led.c b/drivers/net/wireless/iwlwifi/iwl-3945-led.c index d200d08..8b1528e 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-led.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-led.c @@ -229,14 +229,15 @@ static int iwl3945_led_register_led(struct iwl3945_priv *priv, led->led_dev.brightness_set = iwl3945_led_brightness_set; led->led_dev.default_trigger = trigger; + led->priv = priv; + led->type = type; + ret = led_classdev_register(device, &led->led_dev); if (ret) { IWL_ERROR("Error: failed to register led handler.\n"); return ret; } - led->priv = priv; - led->type = type; led->registered = 1; if (set_led && led->led_on) -- cgit v0.10.2 From 56fa18e8f1ef6b3995a4511e61103d0f9205ff4a Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 8 Jun 2008 19:43:42 +0400 Subject: power_supply: Fix race in power_supply_uevent Commit 54d29ad33e3483bcc7ca433a21cf294854e5154a (Power Supply: fix race in device_create) introduced a race in power_supply_uevent. Previously it checked that power_supply is available by checking for dev->driver_data. But now dev->driver_data is set before power_supply->dev is initialised. Signed-off-by: Dmitry Baryshkov Signed-off-by: Anton Vorontsov diff --git a/drivers/power/power_supply_sysfs.c b/drivers/power/power_supply_sysfs.c index c444d6b..49215da 100644 --- a/drivers/power/power_supply_sysfs.c +++ b/drivers/power/power_supply_sysfs.c @@ -201,7 +201,7 @@ int power_supply_uevent(struct device *dev, struct kobj_uevent_env *env) dev_dbg(dev, "uevent\n"); - if (!psy) { + if (!psy || !psy->dev) { dev_dbg(dev, "No power supply yet\n"); return ret; } -- cgit v0.10.2 From 2bd3ed0479c35f7c8dadecf72b725ca0c20ea015 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:39:55 -0700 Subject: tg3: Fix 5714S / 5715S / 5780S link failures The git commit ef167e27039eeaea6d3cdd5c547b082e89840bdd entitled "Fix supporting flowctrl code" introduced a bug that prevents 5714S, 5715S and 5780S devices from falling back to a forced link mode. The problem is that the added flow control check will always fail if flow control is set to autoneg and either RX or TX (or both) flow control is enabled. The driver defaults to setting flow control to autoneg and advertises both RX and TX flow control. The fix is to remove the errant check. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 07b3f77..4c248d7 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -3168,8 +3168,7 @@ static int tg3_setup_fiber_mii_phy(struct tg3 *tp, int force_reset) err |= tg3_readphy(tp, MII_BMCR, &bmcr); if ((tp->link_config.autoneg == AUTONEG_ENABLE) && !force_reset && - (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT) && - tp->link_config.flowctrl == tp->link_config.active_flowctrl) { + (tp->tg3_flags2 & TG3_FLG2_PARALLEL_DETECT)) { /* do nothing, just check for link up at the end */ } else if (tp->link_config.autoneg == AUTONEG_ENABLE) { u32 adv, new_adv; -- cgit v0.10.2 From 0ba11fb307a4f18c11df6f5f255158ce055a2a16 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:40:26 -0700 Subject: tg3: Fix a flags typo This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was testing against the wrong flags variable. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 4c248d7..c129318 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -8598,7 +8598,7 @@ static int tg3_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) (cmd->speed == SPEED_1000)) return -EINVAL; else if ((cmd->speed == SPEED_1000) && - (tp->tg3_flags2 & TG3_FLAG_10_100_ONLY)) + (tp->tg3_flags & TG3_FLAG_10_100_ONLY)) return -EINVAL; tg3_full_lock(tp, 0); -- cgit v0.10.2 From 5f0c4a3cb6fda7c505f8c916b54ea90205feed68 Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:41:12 -0700 Subject: tg3: Fix 5761 WOL On 5761 non-e devices, two problems prevent the administrator from overriding the WOL settings in the device's NVRAM. The first problem is that GPIO 0 and GPIO 2 have been swapped. This change prevented the administrator from turning on WOL when it is disabled in NVRAM. The fix is to add a new path for the 5761 that swaps the two GPIOs in the code as well. The second problem is that GPIO 1 could not be toggled by the driver because the GPIO is shared with the debug UART GPIO. This will prevent the administrator from being able to turn WOL off if it was enabled in NVRAM. The fix is to always disable the debug UART after a GRC reset. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index c129318..f8ce873 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -1295,6 +1295,21 @@ static void tg3_frob_aux_power(struct tg3 *tp) GRC_LCLCTRL_GPIO_OUTPUT0 | GRC_LCLCTRL_GPIO_OUTPUT1), 100); + } else if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) { + /* The 5761 non-e device swaps GPIO 0 and GPIO 2. */ + u32 grc_local_ctrl = GRC_LCLCTRL_GPIO_OE0 | + GRC_LCLCTRL_GPIO_OE1 | + GRC_LCLCTRL_GPIO_OE2 | + GRC_LCLCTRL_GPIO_OUTPUT0 | + GRC_LCLCTRL_GPIO_OUTPUT1 | + tp->grc_local_ctrl; + tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100); + + grc_local_ctrl |= GRC_LCLCTRL_GPIO_OUTPUT2; + tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100); + + grc_local_ctrl &= ~GRC_LCLCTRL_GPIO_OUTPUT0; + tw32_wait_f(GRC_LOCAL_CTRL, grc_local_ctrl, 100); } else { u32 no_gpio2; u32 grc_local_ctrl = 0; @@ -11767,6 +11782,15 @@ static int __devinit tg3_get_invariants(struct tg3 *tp) if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5755) tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL; + if (tp->pdev->device == PCI_DEVICE_ID_TIGON3_5761) { + /* Turn off the debug UART. */ + tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_UART_SEL; + if (tp->tg3_flags2 & TG3_FLG2_IS_NIC) + /* Keep VMain power. */ + tp->grc_local_ctrl |= GRC_LCLCTRL_GPIO_OE0 | + GRC_LCLCTRL_GPIO_OUTPUT0; + } + /* Force the chip into D0. */ err = tg3_set_power_state(tp, PCI_D0); if (err) { -- cgit v0.10.2 From 1b84d9462a93ccfa99f725aad744ab4d1af8402b Mon Sep 17 00:00:00 2001 From: Matt Carlson Date: Mon, 9 Jun 2008 15:41:33 -0700 Subject: tg3: Update version to 3.92.1 This patch increments the version to 3.92.1. Signed-off-by: Matt Carlson Signed-off-by: Michael Chan Signed-off-by: David S. Miller diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index f8ce873..cc4bde8 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -64,8 +64,8 @@ #define DRV_MODULE_NAME "tg3" #define PFX DRV_MODULE_NAME ": " -#define DRV_MODULE_VERSION "3.92" -#define DRV_MODULE_RELDATE "May 2, 2008" +#define DRV_MODULE_VERSION "3.92.1" +#define DRV_MODULE_RELDATE "June 9, 2008" #define TG3_DEF_MAC_MODE 0 #define TG3_DEF_RX_MODE 0 -- cgit v0.10.2 From 1420a4faee7086b6811b4a1f0672e32b5a6df80e Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 9 Jun 2008 15:47:38 -0700 Subject: irda: net/irda build fix: mcs7780 -tip testing found the following build error: drivers/built-in.o: In function `mcs_receive_irq': mcs7780.c:(.text+0x4e429): undefined reference to `crc32_le' drivers/built-in.o: In function `mcs_hard_xmit': mcs7780.c:(.text+0x4e9af): undefined reference to `crc32_le' with: http://redhat.com/~mingo/misc/config-Sun_Jun__8_22_56_14_CEST_2008.bad the reason is a missing enablement of the CRC32 library in the Kconfig. Signed-off-by: Ingo Molnar Signed-off-by: Samuel Ortiz Signed-off-by: David S. Miller diff --git a/drivers/net/irda/Kconfig b/drivers/net/irda/Kconfig index ce816ba..e631755 100644 --- a/drivers/net/irda/Kconfig +++ b/drivers/net/irda/Kconfig @@ -329,6 +329,7 @@ config PXA_FICP config MCS_FIR tristate "MosChip MCS7780 IrDA-USB dongle" depends on IRDA && USB && EXPERIMENTAL + select CRC32 help Say Y or M here if you want to build support for the MosChip MCS7780 IrDA-USB bridge device driver. -- cgit v0.10.2 From 2e761e0532a784816e7e822dbaaece8c5d4be14d Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Mon, 9 Jun 2008 15:53:30 -0700 Subject: ipv6 netns: init net is used to set bindv6only for new sock The bindv6only is tuned via sysctl. It is already on a struct net and per-net sysctls allow for its modification (ipv6_sysctl_net_init). Despite this the value configured in the init net is used for the rest of them. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 3c6aafb..e84b3fd 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -191,7 +191,7 @@ lookup_protocol: np->mcast_hops = -1; np->mc_loop = 1; np->pmtudisc = IPV6_PMTUDISC_WANT; - np->ipv6only = init_net.ipv6.sysctl.bindv6only; + np->ipv6only = net->ipv6.sysctl.bindv6only; /* Init the ipv4 part of the socket since we can have sockets * using v6 API for ipv4. -- cgit v0.10.2 From 5e70b7f3c24468bb1635b295945edb48ecd9656a Mon Sep 17 00:00:00 2001 From: Chris Wright Date: Mon, 9 Jun 2008 16:07:28 -0700 Subject: MAINTAINERS: update PPPoE maintainer address Cc: Michal Ostrowski Signed-off-by: Chris Wright Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 99f5665..cb71eb4 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3264,7 +3264,7 @@ S: Maintained PPP OVER ETHERNET P: Michal Ostrowski -M: mostrows@speakeasy.net +M: mostrows@earthlink.net S: Maintained PPP OVER L2TP -- cgit v0.10.2 From 148f1678f0ba7a5e79e44ff23064d4326fa145a4 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 10 Jun 2008 10:03:18 +0200 Subject: [S390] sparsemem: use SPARSEMEM_STATIC if !64BIT. In case of !64BIT kernel we end up with a zero sized mem_section array. This happens because NR_MEM_SECTIONS is smaller than SECTIONS_PER_ROOT but we have: #define NR_SECTION_ROOTS (NR_MEM_SECTIONS / SECTIONS_PER_ROOT) and struct mem_section *mem_section[NR_SECTION_ROOTS]; So fix this by selecting SPARSEMEM_STATIC which makes sure that SECTIONS_PER_ROOT is 1. Cc: Gerald Schaefer Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index 93acb3c..107e492 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -304,6 +304,7 @@ config ARCH_SPARSEMEM_ENABLE def_bool y select SPARSEMEM_VMEMMAP_ENABLE select SPARSEMEM_VMEMMAP + select SPARSEMEM_STATIC if !64BIT config ARCH_SPARSEMEM_DEFAULT def_bool y -- cgit v0.10.2 From 12829126aa47758608578cc5be3a5adffc3d4b09 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 10 Jun 2008 10:03:19 +0200 Subject: [S390] cio: Fix sparse warnings in blacklist.c. sparse complains about signedness: drivers/s390/cio/blacklist.c:132:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:132:28: expected unsigned int *val drivers/s390/cio/blacklist.c:132:28: got int *cssid drivers/s390/cio/blacklist.c:136:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:136:28: expected unsigned int *val drivers/s390/cio/blacklist.c:136:28: got int *ssid drivers/s390/cio/blacklist.c:140:28: warning: incorrect type in argument 2 (different signedness) drivers/s390/cio/blacklist.c:140:28: expected unsigned int *val drivers/s390/cio/blacklist.c:140:28: got int *devno cssid, ssid and devno are of course unsigned, so let's make the variables unsigned as well. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c index a4a5f2e..0bfcbbe 100644 --- a/drivers/s390/cio/blacklist.c +++ b/drivers/s390/cio/blacklist.c @@ -97,8 +97,8 @@ static int pure_hex(char **cp, unsigned int *val, int min_digit, return 0; } -static int parse_busid(char *str, int *cssid, int *ssid, int *devno, - int msgtrigger) +static int parse_busid(char *str, unsigned int *cssid, unsigned int *ssid, + unsigned int *devno, int msgtrigger) { char *str_work; int val, rc, ret; @@ -148,7 +148,7 @@ out: static int blacklist_parse_parameters(char *str, range_action action, int msgtrigger) { - int from_cssid, to_cssid, from_ssid, to_ssid, from, to; + unsigned int from_cssid, to_cssid, from_ssid, to_ssid, from, to; int rc, totalrc; char *parm; range_action ra; -- cgit v0.10.2 From ee0ddadd086e25503f81be551c43f66472300acd Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Tue, 10 Jun 2008 10:03:20 +0200 Subject: [S390] vmemmap: fix off-by-one bug. If a memory range is supposed to be added to the 1:1 mapping and it ends just below the maximum supported physical address it won't succeed. This is because a test doesn't consider that the end address is 1 smaller than start + size. Fix the comparison. Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky diff --git a/arch/s390/mm/vmem.c b/arch/s390/mm/vmem.c index f591188..e4868bf 100644 --- a/arch/s390/mm/vmem.c +++ b/arch/s390/mm/vmem.c @@ -236,7 +236,7 @@ static int insert_memory_segment(struct memory_segment *seg) { struct memory_segment *tmp; - if (seg->start + seg->size >= VMEM_MAX_PHYS || + if (seg->start + seg->size > VMEM_MAX_PHYS || seg->start + seg->size < seg->start) return -ERANGE; -- cgit v0.10.2 From 85b0d7c0ad92c47887bf6aeb424a14e7af14bd87 Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Tue, 10 Jun 2008 10:03:21 +0200 Subject: [S390] cio: Fix inverted isc priorities. Priorities for I/O interruption subclasses range from 0 (highest) to 7 (lowest). Unfortunately, the console has been using isc 7 instead of an isc with a higher priority than regular I/O subchannels (which use 3). Fix this by making the console use isc 1. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/cio/cio.c b/drivers/s390/cio/cio.c index 82c6a2d..b32d7eb 100644 --- a/drivers/s390/cio/cio.c +++ b/drivers/s390/cio/cio.c @@ -576,12 +576,14 @@ cio_validate_subchannel (struct subchannel *sch, struct subchannel_id schid) err = -ENODEV; goto out; } - if (cio_is_console(sch->schid)) + if (cio_is_console(sch->schid)) { sch->opm = 0xff; - else + sch->isc = 1; + } else { sch->opm = chp_get_sch_opm(sch); + sch->isc = 3; + } sch->lpm = sch->schib.pmcw.pam & sch->opm; - sch->isc = 3; CIO_MSG_EVENT(6, "Detected device %04x on subchannel 0.%x.%04X " "- PIM = %02X, PAM = %02X, POM = %02X\n", @@ -704,9 +706,9 @@ void wait_cons_dev(void) if (!console_subchannel_in_use) return; - /* disable all but isc 7 (console device) */ + /* disable all but isc 1 (console device) */ __ctl_store (save_cr6, 6, 6); - cr6 = 0x01000000; + cr6 = 0x40000000; __ctl_load (cr6, 6, 6); do { @@ -788,11 +790,11 @@ cio_probe_console(void) } /* - * enable console I/O-interrupt subclass 7 + * enable console I/O-interrupt subclass 1 */ - ctl_set_bit(6, 24); - console_subchannel.isc = 7; - console_subchannel.schib.pmcw.isc = 7; + ctl_set_bit(6, 30); + console_subchannel.isc = 1; + console_subchannel.schib.pmcw.isc = 1; console_subchannel.schib.pmcw.intparm = (u32)(addr_t)&console_subchannel; ret = cio_modify(&console_subchannel); -- cgit v0.10.2 From 7b439d25300dc59bba76b53eb344bb9e5a1133f2 Mon Sep 17 00:00:00 2001 From: Carsten Otte Date: Tue, 10 Jun 2008 10:03:22 +0200 Subject: [S390] vt220 console, initialize list head before use This patch fixes a null pointer dereference during initialisation when no sclp event facility is available: sclp vt220 tty driver: could not register vt220 - sclp_register returned -5 Unable to handle kernel paging request at virtual user address 0000000000000000 Oops: 0004 [#1] PREEMPT SMP Modules linked in: CPU: 0 Not tainted 2.6.26-rc3-kvm-bigiron-00968-gd939e93-dirty #30 Process swapper (pid: 0, task: 0000000000600be0, ksp: 000000000064a000) Krnl PSW : 0400000180000000 0000000000320d8c (sclp_unregister+0x48/0x8c) R:0 T:1 IO:0 EX:0 Key:0 M:0 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000000000 0000000000000000 0000000000630478 0700000000649c20 0000000000000000 0000000000433060 000000000064a660 0000000002e26000 00000000006db000 0000000000000000 0000000000a78578 0000000000649b80 0000000000630dc0 000000000044fa20 0000000000320d76 0000000000649b80 Krnl Code: 0000000000320d7c: e310c0080004 lg %r1,8(%r12) 0000000000320d82: b9040032 lgr %r3,%r2 0000000000320d86: c02000187b79 larl %r2,630478 >0000000000320d8c: e34010000024 stg %r4,0(%r1) 0000000000320d92: e31040080024 stg %r1,8(%r4) 0000000000320d98: c01100200200 lgfi %r1,2097664 0000000000320d9e: e310c0080024 stg %r1,8(%r12) 0000000000320da4: c01100100100 lgfi %r1,1048832 Call Trace: ([<0000000000320d76>] sclp_unregister+0x32/0x8c) [<00000000006657b4>] __sclp_vt220_cleanup+0xc4/0xe0 [<000000000066595c>] __sclp_vt220_init+0x18c/0x1a0 [<0000000000665aba>] sclp_vt220_con_init+0x42/0x68 [<00000000006601ca>] console_init+0x4e/0x68 [<000000000064acae>] start_kernel+0x3a2/0x4dc [<0000000000100020>] _stext+0x20/0x80 INFO: lockdep is turned off. Last Breaking-Event-Address: [<000000000041f964>] _spin_lock_irqsave+0xb0/0xb4 <4>---[ end trace 31fd0ba7d8756001 ]--- The issue is caused by a list_empty() check in __sclp_vt220_cleanup, which usually fails on non-initialized list heads that contain {NULL,NULL} instead. Signed-off-by: Carsten Otte Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/sclp_vt220.c b/drivers/s390/char/sclp_vt220.c index 62576af..3e577f6 100644 --- a/drivers/s390/char/sclp_vt220.c +++ b/drivers/s390/char/sclp_vt220.c @@ -773,6 +773,7 @@ sclp_vt220_con_init(void) { int rc; + INIT_LIST_HEAD(&sclp_vt220_register.list); if (!CONSOLE_IS_SCLP) return 0; rc = __sclp_vt220_init(); -- cgit v0.10.2 From 24d3e210c18bfedafe986ec489575cf91ac39d22 Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Tue, 10 Jun 2008 10:03:23 +0200 Subject: [S390] Fix build failure in __cpu_up() The first argument to __ctl_store() should be the array to store stuff in, not just the first element of that array. With the current code in __cpu_up(), mainline GCC dies with an internal compiler error. I didn't diagnose that further, but just fixed the kernel bug. Signed-off-by: Segher Boessenkool Signed-off-by: Martin Schwidefsky Cc: Heiko Carstens diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c index 42b1d12..5d4fa4b 100644 --- a/arch/s390/kernel/smp.c +++ b/arch/s390/kernel/smp.c @@ -711,7 +711,7 @@ int __cpuinit __cpu_up(unsigned int cpu) memset(sf, 0, sizeof(struct stack_frame)); sf->gprs[9] = (unsigned long) sf; cpu_lowcore->save_area[15] = (unsigned long) sf; - __ctl_store(cpu_lowcore->cregs_save_area[0], 0, 15); + __ctl_store(cpu_lowcore->cregs_save_area, 0, 15); asm volatile( " stam 0,15,0(%0)" : : "a" (&cpu_lowcore->access_regs_save_area) : "memory"); -- cgit v0.10.2 From b57838ea3f860c97e4726ab93abdf83a3d079a66 Mon Sep 17 00:00:00 2001 From: Martin Schwidefsky Date: Tue, 10 Jun 2008 10:03:24 +0200 Subject: [S390] Fix __ctl_load/__ctl_store inline assembly constraints __ctl_load/__ctl_store are called with either an array of unsigned long or a single unsigned long value. Add an address operator to the "m"/"=m" contraints to make them work for unsigned long arguments as well. Signed-off-by: Martin Schwidefsky diff --git a/include/asm-s390/system.h b/include/asm-s390/system.h index e0d4500..819e7d9 100644 --- a/include/asm-s390/system.h +++ b/include/asm-s390/system.h @@ -315,14 +315,14 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) asm volatile( \ " lctlg %1,%2,0(%0)\n" \ : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(array))); \ + "m" (*(addrtype *)(&array))); \ }) #define __ctl_store(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ " stctg %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(array)) \ + : "=m" (*(addrtype *)(&array)) \ : "a" (&array), "i" (low), "i" (high)); \ }) @@ -333,14 +333,14 @@ __cmpxchg(volatile void *ptr, unsigned long old, unsigned long new, int size) asm volatile( \ " lctl %1,%2,0(%0)\n" \ : : "a" (&array), "i" (low), "i" (high), \ - "m" (*(addrtype *)(array))); \ + "m" (*(addrtype *)(&array))); \ }) #define __ctl_store(array, low, high) ({ \ typedef struct { char _[sizeof(array)]; } addrtype; \ asm volatile( \ " stctl %2,%3,0(%1)\n" \ - : "=m" (*(addrtype *)(array)) \ + : "=m" (*(addrtype *)(&array)) \ : "a" (&array), "i" (low), "i" (high)); \ }) -- cgit v0.10.2 From 1783e60ff207805a3e75cf522b17ec9bb1604a62 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 10 Jun 2008 10:03:25 +0200 Subject: [S390] tape_3590.c: introduce missing kfree The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) @r exists@ expression E,E1; statement S; position p1,p2,p3; @@ E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != E = E1 if (E == NULL || ...) S ... when != E = E1 if@p2 (...) { ... when != kfree(E) } ... when != E = E1 kfree@p3(E); @forall@ position r.p2; expression r.E; int E1 != 0; @@ * if@p2 (...) { ... when != kfree(E) when strict return E1; } Signed-off-by: Julia Lawall Signed-off-by: Martin Schwidefsky diff --git a/drivers/s390/char/tape_3590.c b/drivers/s390/char/tape_3590.c index 8246ef3..42ce791 100644 --- a/drivers/s390/char/tape_3590.c +++ b/drivers/s390/char/tape_3590.c @@ -1598,7 +1598,7 @@ tape_3590_setup_device(struct tape_device *device) rc = tape_3590_read_dev_chars(device, rdc_data); if (rc) { DBF_LH(3, "Read device characteristics failed!\n"); - goto fail_kmalloc; + goto fail_rdc_data; } rc = tape_std_assign(device); if (rc) -- cgit v0.10.2 From 16882c1e962b4be5122fc05aaf2afc10fd9e2d15 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Sun, 8 Jun 2008 21:20:41 +0400 Subject: sched: fix TASK_WAKEKILL vs SIGKILL race schedule() has the special "TASK_INTERRUPTIBLE && signal_pending()" case, this allows us to do current->state = TASK_INTERRUPTIBLE; schedule(); without fear to sleep with pending signal. However, the code like current->state = TASK_KILLABLE; schedule(); is not right, schedule() doesn't take TASK_WAKEKILL into account. This means that mutex_lock_killable(), wait_for_completion_killable(), down_killable(), schedule_timeout_killable() can miss SIGKILL (and btw the second SIGKILL has no effect). Introduce the new helper, signal_pending_state(), and change schedule() to use it. Hopefully it will have more users, that is why the task's state is passed separately. Note this "__TASK_STOPPED | __TASK_TRACED" check in signal_pending_state(). This is needed to preserve the current behaviour (ptrace_notify). I hope this check will be removed soon, but this (afaics good) change needs the separate discussion. The fast path is "(state & (INTERRUPTIBLE | WAKEKILL)) + signal_pending(p)", basically the same that schedule() does now. However, this patch of course bloats schedule(). Signed-off-by: Oleg Nesterov Signed-off-by: Ingo Molnar diff --git a/include/linux/sched.h b/include/linux/sched.h index ae0be3c..c5d3f84 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -2026,6 +2026,19 @@ static inline int fatal_signal_pending(struct task_struct *p) return signal_pending(p) && __fatal_signal_pending(p); } +static inline int signal_pending_state(long state, struct task_struct *p) +{ + if (!(state & (TASK_INTERRUPTIBLE | TASK_WAKEKILL))) + return 0; + if (!signal_pending(p)) + return 0; + + if (state & (__TASK_STOPPED | __TASK_TRACED)) + return 0; + + return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p); +} + static inline int need_resched(void) { return unlikely(test_thread_flag(TIF_NEED_RESCHED)); diff --git a/kernel/sched.c b/kernel/sched.c index bfb8ad8..2c65bf2 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4159,12 +4159,10 @@ need_resched_nonpreemptible: clear_tsk_need_resched(prev); if (prev->state && !(preempt_count() & PREEMPT_ACTIVE)) { - if (unlikely((prev->state & TASK_INTERRUPTIBLE) && - signal_pending(prev))) { + if (unlikely(signal_pending_state(prev->state, prev))) prev->state = TASK_RUNNING; - } else { + else deactivate_task(rq, prev, 1); - } switch_count = &prev->nvcsw; } -- cgit v0.10.2 From b7f09ae583c49d28b2796d2fa5893dcf822e3a10 Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Thu, 5 Jun 2008 18:14:44 +0200 Subject: x86, pci-dma.c: don't always add __GFP_NORETRY to gfp Currently arch/x86/kernel/pci-dma.c always adds __GFP_NORETRY to the allocation flags, because it wants to be reasonably sure not to deadlock when calling alloc_pages(). But really that should only be done in two cases: - when allocating memory in the lower 16 MB DMA zone. If there's no free memory there, waiting or OOM killing is of no use - when optimistically trying an allocation in the DMA32 zone when dma_mask < DMA_32BIT_MASK hoping that the allocation happens to fall within the limits of the dma_mask Also blindly adding __GFP_NORETRY to the the gfp variable might not be a good idea since we then also use it when calling dma_ops->alloc_coherent(). Clearing it might also not be a good idea, dma_alloc_coherent()'s caller might have set it on purpose. The gfp variable should not be clobbered. [ mingo@elte.hu: converted to delta patch ontop of previous version. ] Signed-off-by: Miquel van Smoorenburg Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/pci-dma.c b/arch/x86/kernel/pci-dma.c index 069e843..dc00a13 100644 --- a/arch/x86/kernel/pci-dma.c +++ b/arch/x86/kernel/pci-dma.c @@ -378,6 +378,7 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, struct page *page; unsigned long dma_mask = 0; dma_addr_t bus; + int noretry = 0; /* ignore region specifiers */ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM | __GFP_DMA32); @@ -397,19 +398,25 @@ dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *dma_handle, if (dev->dma_mask == NULL) return NULL; + /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ + if (gfp & __GFP_DMA) + noretry = 1; + #ifdef CONFIG_X86_64 /* Why <=? Even when the mask is smaller than 4GB it is often larger than 16MB and in this case we have a chance of finding fitting memory in the next higher zone first. If not retry with true GFP_DMA. -AK */ - if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) + if (dma_mask <= DMA_32BIT_MASK && !(gfp & GFP_DMA)) { gfp |= GFP_DMA32; + if (dma_mask < DMA_32BIT_MASK) + noretry = 1; + } #endif again: - /* Don't invoke OOM killer or retry in lower 16MB DMA zone */ page = dma_alloc_pages(dev, - (gfp & GFP_DMA) ? gfp | __GFP_NORETRY : gfp, get_order(size)); + noretry ? gfp | __GFP_NORETRY : gfp, get_order(size)); if (page == NULL) return NULL; -- cgit v0.10.2 From f17c63231c9c2bfc5717af1890ad17312a1c2c1c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Mon, 17 Mar 2008 20:52:08 +0300 Subject: [POWERPC] 83xx: MPC837xRDB's VSC7385 ethernet switch isn't on the MDIO bus MDIO-less PHYs should use CONFIG_FIXED_PHY driver and appropriate fixed-link property in the device tree. If not, ethernet will not work: e0024520:03 not found eth1: Could not attach to PHY IP-Config: Failed to open eth1 Signed-off-by: Anton Vorontsov Signed-off-by: Kumar Gala diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts index 5bc09ad..f3083c7 100644 --- a/arch/powerpc/boot/dts/mpc8377_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts index 711f9a3..0e872a6 100644 --- a/arch/powerpc/boot/dts/mpc8378_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts index c11ceb7..1eb8def 100644 --- a/arch/powerpc/boot/dts/mpc8379_rdb.dts +++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts @@ -164,12 +164,6 @@ reg = <0x2>; device_type = "ethernet-phy"; }; - phy3: ethernet-phy@3 { - interrupt-parent = <&ipic>; - interrupts = <18 0x8>; - reg = <0x3>; - device_type = "ethernet-phy"; - }; }; enet0: ethernet@24000 { @@ -195,7 +189,7 @@ interrupts = <35 0x8 36 0x8 37 0x8>; phy-connection-type = "mii"; interrupt-parent = <&ipic>; - phy-handle = <&phy3>; + fixed-link = <1 1 1000 0 0>; }; serial0: serial@4500 { diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index 7c1c7fa..0d44855 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit # Linux kernel version: 2.6.26-rc5 -# Mon Jun 9 08:52:29 2008 +# Tue Jun 10 09:17:12 2008 # # CONFIG_PPC64 is not set @@ -454,7 +454,7 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set +CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y -- cgit v0.10.2 From c592713b3e124ce0719e6af4bc2520424c49cbae Mon Sep 17 00:00:00 2001 From: Neil Horman Date: Tue, 10 Jun 2008 08:53:39 -0400 Subject: shm: Remove silly double assignment Found a silly double assignment of err is do_shmat. Silly, but good to clean up the useless code. Signed-off-by: Neil Horman Signed-off-by: Linus Torvalds diff --git a/ipc/shm.c b/ipc/shm.c index 554429a..d05f6b5 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -894,8 +894,6 @@ long do_shmat(int shmid, char __user *shmaddr, int shmflg, ulong *raddr) if (!sfd) goto out_put_dentry; - err = -ENOMEM; - file = alloc_file(path.mnt, path.dentry, f_mode, &shm_file_operations); if (!file) goto out_free; -- cgit v0.10.2 From d1daeabf0da5bfa1943272ce508e2ba785730bf0 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Tue, 10 Jun 2008 10:20:53 -0500 Subject: [SCSI] sr: fix corrupt CD data after media change and delay Reported-by: Geert Uytterhoeven If you delay 30s or more before mounting a CD after inserting it then the kernel has the wrong value for the CD size. http://marc.info/?t=121276133000001 The problem is in sr_test_unit_ready(): the function eats unit attentions without adjusting the sdev->changed status. This means that when the CD signals changed media via unit attention, we can ignore it. Fix by making sr_test_unit_ready() adjust the changed status. Tested-by: Geert Uytterhoeven Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/sr.c b/drivers/scsi/sr.c index 7ee86d4a7..c82df8b 100644 --- a/drivers/scsi/sr.c +++ b/drivers/scsi/sr.c @@ -178,6 +178,9 @@ int sr_test_unit_ready(struct scsi_device *sdev, struct scsi_sense_hdr *sshdr) the_result = scsi_execute_req(sdev, cmd, DMA_NONE, NULL, 0, sshdr, SR_TIMEOUT, retries--); + if (scsi_sense_valid(sshdr) && + sshdr->sense_key == UNIT_ATTENTION) + sdev->changed = 1; } while (retries > 0 && (!scsi_status_is_good(the_result) || -- cgit v0.10.2 From b76916462d990751882eaeadc75ac8c487d6de1d Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: ide: remove the ide_etrax100 chipset type I forgot to remove the ide_etrax100 chipset type when removing the ETRAX_IDE driver. Reported-by: Bartlomiej Zolnierkiewicz Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 655ec7e..0bccb63 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1333,8 +1333,7 @@ static void ide_port_init_devices(ide_hwif_t *hwif) static void ide_init_port(ide_hwif_t *hwif, unsigned int port, const struct ide_port_info *d) { - if (d->chipset != ide_etrax100) - hwif->channel = port; + hwif->channel = port; if (d->chipset) hwif->chipset = d->chipset; @@ -1519,7 +1518,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d) continue; } - if (d->chipset != ide_etrax100 && (i & 1) && mate) { + if ((i & 1) && mate) { hwif->mate = mate; mate->mate = hwif; } diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 8d6ad81..55ec7f7 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -63,7 +63,6 @@ static int proc_ide_read_imodel case ide_pmac: name = "mac-io"; break; case ide_au1xxx: name = "au1xxx"; break; case ide_palm3710: name = "palm3710"; break; - case ide_etrax100: name = "etrax100"; break; case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; } diff --git a/include/linux/ide.h b/include/linux/ide.h index f8f195c..9918772 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -153,7 +153,7 @@ enum { ide_unknown, ide_generic, ide_pci, ide_qd65xx, ide_umc8672, ide_ht6560b, ide_rz1000, ide_trm290, ide_cmd646, ide_cy82c693, ide_4drives, - ide_pmac, ide_etrax100, ide_acorn, + ide_pmac, ide_acorn, ide_au1xxx, ide_palm3710 }; -- cgit v0.10.2 From 34e6e88f025ebe0613f53af2703d4d902e39273a Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: MAINTAINERS: remove SIS 5513 IDE entry - maintainer has not been active for years - URLs no longer exist - covered by the IDE SUBSYSTEM entry - maintainer email bounces Signed-off-by: Adrian Bunk Cc: Lionel.Bouton@inet6.fr Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/MAINTAINERS b/MAINTAINERS index cb71eb4..e3560df 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3658,13 +3658,6 @@ M: romieu@fr.zoreil.com L: netdev@vger.kernel.org S: Maintained -SIS 5513 IDE CONTROLLER DRIVER -P: Lionel Bouton -M: Lionel.Bouton@inet6.fr -W: http://inet6.dyn.dhs.org/sponsoring/sis5513/index.html -W: http://gyver.homeip.net/sis5513/index.html -S: Maintained - SIS 900/7016 FAST ETHERNET DRIVER P: Daniele Venzano M: venza@brownhat.org -- cgit v0.10.2 From cd18f69f845dc8c769f0ef65046b7a113b8aba87 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: sis5513: add missing pci_enable_device() call Cc: Riccardo Gori Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c index 4b0b85d..e127eb2 100644 --- a/drivers/ide/pci/sis5513.c +++ b/drivers/ide/pci/sis5513.c @@ -569,6 +569,11 @@ static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_devi { struct ide_port_info d = sis5513_chipset; u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f }; + int rc; + + rc = pci_enable_device(dev); + if (rc) + return rc; if (sis_find_family(dev) == 0) return -ENOTSUPP; -- cgit v0.10.2 From 343a3451e20314d5959b59b992e33fbaadfe52bf Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:36 +0200 Subject: ide-generic: add missing hwif->chipset setup hwif->chipset need to be set properly or ide-generic driver will break once we make a final step in fixing host drivers' dependence on ide_hwifs[]. Problem was catched early thanks to IDE tree exposure in -mm / -next trees and reported by people listed people (thank you guys!). Reported-by: "John Keller" Reported-by: Dmitri Vorobiev Reported-by: Mel Gorman Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index a6073e2..9134488 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -125,6 +125,7 @@ static int __init ide_generic_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, io_addr, io_addr + 0x206); hw.irq = ide_default_irq(io_addr); + hw.chipset = ide_generic; ide_init_port_hw(hwif, &hw); idx[i] = i; -- cgit v0.10.2 From d427e836d1d9b58e8f1e648c09b5fbe36e01013b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: ide: fix host drivers missing hwif->chipset initialization ide_find_port() now depends on ->chipset being set for occupied ide_hwifs[] slots so all host drivers have to initialize hwif->chipset properly. This patch fixes a regression on hosts with > 1 port or with a single port but no devices attached to it for an affected host drivers. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c index 713cef2..8e8c281 100644 --- a/drivers/ide/arm/bast-ide.c +++ b/drivers/ide/arm/bast-ide.c @@ -42,6 +42,7 @@ static int __init bastide_register(unsigned int base, unsigned int aux, int irq) hw.io_ports.ctl_addr = aux + (6 * 0x20); hw.irq = irq; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif == NULL) diff --git a/drivers/ide/arm/ide_arm.c b/drivers/ide/arm/ide_arm.c index 4263ffd..2f311da 100644 --- a/drivers/ide/arm/ide_arm.c +++ b/drivers/ide/arm/ide_arm.c @@ -49,6 +49,7 @@ static int __init ide_arm_init(void) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = IDE_ARM_IRQ; + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/ide-pnp.c b/drivers/ide/ide-pnp.c index 6a8953f..adbd017 100644 --- a/drivers/ide/ide-pnp.c +++ b/drivers/ide/ide-pnp.c @@ -55,6 +55,7 @@ static int idepnp_probe(struct pnp_dev *dev, const struct pnp_device_id *dev_id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base, ctl); hw.irq = pnp_irq(dev, 0); + hw.chipset = ide_generic; hwif = ide_find_port(); if (hwif) { diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 0bccb63..380fa0c 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -1664,6 +1664,7 @@ static void ide_legacy_init_one(u8 *idx, hw_regs_t *hw, u8 port_no, ide_std_init_ports(hw, base, ctl); hw->irq = irq; + hw->chipset = d->chipset; hwif = ide_find_port_slot(d); if (hwif) { diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 5c730e4..9a1d27e 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -138,6 +138,8 @@ static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 9e449a0..af11028 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -81,6 +81,8 @@ static void __init falconide_setup_ports(hw_regs_t *hw) hw->irq = IRQ_MFP_IDE; hw->ack_intr = NULL; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index a9c2593..eb15ca6 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -112,6 +112,8 @@ static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = IRQ_AMIGA_PORTS; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } /* diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index caa2632..2e84290 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -78,6 +78,8 @@ static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static const char *mac_ide_name[] = diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 6f535d0..8ff6e2d 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -70,6 +70,8 @@ static void q40_ide_setup_ports(hw_regs_t *hw, unsigned long base, hw->irq = irq; hw->ack_intr = ack_intr; + + hw->chipset = ide_generic; } static void q40ide_input_data(ide_drive_t *drive, struct request *rq, diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c index aaf3810..b38a1980 100644 --- a/drivers/ide/pci/cmd640.c +++ b/drivers/ide/pci/cmd640.c @@ -747,9 +747,11 @@ static int __init cmd640x_init(void) ide_std_init_ports(&hw[0], 0x1f0, 0x3f6); hw[0].irq = 14; + hw[0].chipset = ide_cmd640; ide_std_init_ports(&hw[1], 0x170, 0x376); hw[1].irq = 15; + hw[1].chipset = ide_cmd640; printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x" "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr); diff --git a/drivers/ide/ppc/mpc8xx.c b/drivers/ide/ppc/mpc8xx.c index f0e638d..236f9c3 100644 --- a/drivers/ide/ppc/mpc8xx.c +++ b/drivers/ide/ppc/mpc8xx.c @@ -303,6 +303,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) pcmp->pcmc_per = 0x100000 >> (16 * _slot_); #endif /* CONFIG_IDE_8xx_PCCARD */ + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_PCCARD || CONFIG_IDE_8xx_DIRECT */ @@ -377,6 +379,8 @@ static int __init m8xx_ide_init_ports(hw_regs_t *hw, unsigned long data_port) ((immap_t *) IMAP_ADDR)->im_siu_conf.sc_siel |= (0x80000000 >> ioport_dsc[data_port].irq); + hw->chipset = ide_generic; + return 0; } #endif /* CONFIG_IDE_8xx_DIRECT */ -- cgit v0.10.2 From 8a7dbb9761d59996e4a037c969eabd8e93f3be1c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: delkin_cb: set proper hwif->gendev.parent value hwif->dev was set too late (after ide_device_add() call) so hwif->gendev.parent was not initialized properly. Fix it by setting hw.dev and letting ide_init_port_hw() do the rest. Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index b9e4579..5cf5933 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -79,6 +79,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) memset(&hw, 0, sizeof(hw)); ide_std_init_ports(&hw, base + 0x10, base + 0x1e); hw.irq = dev->irq; + hw.dev = &dev->dev; hw.chipset = ide_pci; /* this enables IRQ sharing */ hwif = ide_find_port(); @@ -99,7 +100,7 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) goto out_disable; pci_set_drvdata(dev, hwif); - hwif->dev = &dev->dev; + drive = &hwif->drives[0]; if (drive->present) { drive->io_32bit = 1; -- cgit v0.10.2 From 1c4d4ad50ac5cc74c605c4a467db42c961ec7a69 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:37 +0200 Subject: delkin_cb: use struct ide_port_info Convert the driver to use struct ide_port_info - as a nice side-effect this fixes racy setup of ->io_32bit/unmask settings (after ide_device_add() call device can be already in use). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 5cf5933..1b69e4d 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -47,13 +47,18 @@ static const struct ide_port_ops delkin_cb_port_ops = { .quirkproc = ide_undecoded_slave, }; +static const struct ide_port_info delkin_cb_port_info = { + .port_ops = &delkin_cb_port_ops, + .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS | + IDE_HFLAG_NO_DMA, +}; + static int __devinit delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) { unsigned long base; hw_regs_t hw; ide_hwif_t *hwif = NULL; - ide_drive_t *drive; int i, rc; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -90,22 +95,16 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_init_port_data(hwif, i); ide_init_port_hw(hwif, &hw); - hwif->port_ops = &delkin_cb_port_ops; idx[0] = i; - ide_device_add(idx, NULL); + ide_device_add(idx, &delkin_cb_port_info); if (!hwif->present) goto out_disable; pci_set_drvdata(dev, hwif); - drive = &hwif->drives[0]; - if (drive->present) { - drive->io_32bit = 1; - drive->unmask = 1; - } return 0; out_disable: -- cgit v0.10.2 From 96fe439ec9ca25b09e1458d86bd739757ae11ea1 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: delkin_cb: add warm-plug support Don't fail the probe if there are no devices attached to the controller. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 1b69e4d..538f804 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -100,15 +100,11 @@ delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id) ide_device_add(idx, &delkin_cb_port_info); - if (!hwif->present) - goto out_disable; - pci_set_drvdata(dev, hwif); return 0; out_disable: - printk(KERN_ERR "delkin_cb: no IDE devices found\n"); pci_release_regions(dev); pci_disable_device(dev); return -ENODEV; -- cgit v0.10.2 From f4084a1d18d618bb360bc72713a3bc2b8375e12f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: delkin_cb: add missing __init/__exit tags Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c index 538f804..af0f300 100644 --- a/drivers/ide/pci/delkin_cb.c +++ b/drivers/ide/pci/delkin_cb.c @@ -135,14 +135,12 @@ static struct pci_driver driver = { .remove = delkin_cb_remove, }; -static int -delkin_cb_init (void) +static int __init delkin_cb_init(void) { return pci_register_driver(&driver); } -static void -delkin_cb_exit (void) +static void __exit delkin_cb_exit(void) { pci_unregister_driver(&driver); } -- cgit v0.10.2 From fb374966ba13ccac341499eaefecd58a96bafb59 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: palm_bk3710: add warm-plug support Don't fail the probe if there are no devices attached to the controller. Cc: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index 96378eb..d024ac8 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -409,9 +409,6 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) ide_device_add(idx, &palm_bk3710_port_info); - if (!hwif->present) - goto out; - return 0; out: printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n"); -- cgit v0.10.2 From 513f3c10ddb24b0a261ae96de6f7911ba28713f9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: ide: export ide_doubler This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1204 modules ERROR: "ide_doubler" [drivers/ide/ide-core.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index eb15ca6..fed7d81 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include @@ -62,7 +63,10 @@ GAYLE_NUM_HWIFS-1) #define GAYLE_HAS_CONTROL_REG (!ide_doubler) #define GAYLE_IDEREG_SIZE (ide_doubler ? 0x1000 : 0x2000) + int ide_doubler = 0; /* support IDE doublers? */ +EXPORT_SYMBOL_GPL(ide_doubler); + module_param_named(doubler, ide_doubler, bool, 0); MODULE_PARM_DESC(doubler, "enable support for IDE doublers"); #endif /* CONFIG_BLK_DEV_IDEDOUBLER */ -- cgit v0.10.2 From efc0fc1c2f37c8c0e43c7616394a979a042b9331 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 20:56:38 +0200 Subject: fix BLK_DEV_HD_ONLY on ARM dependencies This patch limits BLK_DEV_HD_ONLY to the ARM platforms offering IRQ_HARDDISK, fixing the following compile error on others: <-- snip --> ... CC drivers/ide/legacy/hd.o ... /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_times_out': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: (Each undeclared identifier is reported only once /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:542: error: for each function it appears in.) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'do_hd_request': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:661: error: 'IRQ_HARDDISK' undeclared (first use in this function) /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c: In function 'hd_init': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/ide/legacy/hd.c:765: error: 'IRQ_HARDDISK' undeclared (first use in this function) make[3]: *** [drivers/ide/legacy/hd.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Cc: Russell King Signed-off-by: Adrian Bunk Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index b4f3aef..1607536 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1028,6 +1028,7 @@ endif config BLK_DEV_HD_ONLY bool "Old hard disk (MFM/RLL/IDE) driver" + depends on !ARM || ARCH_RPC || ARCH_SHARK || BROKEN help There are two drivers for MFM/RLL/IDE hard disks. Most people use the newer enhanced driver, but this old one is still around for two -- cgit v0.10.2 From 24797a344293601f14f49e2d259c3ca447c4f802 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Tue, 10 Jun 2008 12:29:49 -0700 Subject: RDMA/nes: Fix off-by-one in nes_reg_user_mr() error path nes_reg_user_mr() should fail if page_count becomes >= 1024 * 512 rather than just testing for strict >, because page_count is essentially used as an index into an array with 1024 * 512 entries, so allowing the loop to continue with page_count == 1024 * 512 means that memory after the end of the array is corrupted. This leads to a crash triggerable by a userspace application that requests registration of a too-big region. Also get rid of the call to pci_free_consistent() here to avoid corrupting state with a double free, since the same memory will be freed in the code jumped to at reg_user_mr_err. Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/nes/nes_verbs.c b/drivers/infiniband/hw/nes/nes_verbs.c index 99b3c4a..d617da9 100644 --- a/drivers/infiniband/hw/nes/nes_verbs.c +++ b/drivers/infiniband/hw/nes/nes_verbs.c @@ -2456,10 +2456,8 @@ static struct ib_mr *nes_reg_user_mr(struct ib_pd *pd, u64 start, u64 length, if ((page_count!=0)&&(page_count<<12)-(region->offset&(4096-1))>=region->length) goto enough_pages; if ((page_count&0x01FF) == 0) { - if (page_count>(1024*512)) { + if (page_count >= 1024 * 512) { ib_umem_release(region); - pci_free_consistent(nesdev->pcidev, 4096, vpbl.pbl_vbase, - vpbl.pbl_pbase); nes_free_resource(nesadapter, nesadapter->allocated_mrs, stag_index); kfree(nesmr); -- cgit v0.10.2 From 6b6707a50c7598a83820077393f8823ab791abf8 Mon Sep 17 00:00:00 2001 From: James Chapman Date: Tue, 10 Jun 2008 12:35:00 -0700 Subject: l2tp: Fix potential memory corruption in pppol2tp_recvmsg() This patch fixes a potential memory corruption in pppol2tp_recvmsg(). If skb->len is bigger than the caller's buffer length, memcpy_toiovec() will go into unintialized data on the kernel heap, interpret it as an iovec and start modifying memory. The fix is to change the memcpy_toiovec() call to skb_copy_datagram_iovec() so that paged packets (rare for PPPOL2TP) are handled properly. Also check that the caller's buffer is big enough for the data and set the MSG_TRUNC flag if it is not so. Reported-by: Ilja Signed-off-by: James Chapman Signed-off-by: David S. Miller diff --git a/drivers/net/pppol2tp.c b/drivers/net/pppol2tp.c index 70cfdb4..f929882 100644 --- a/drivers/net/pppol2tp.c +++ b/drivers/net/pppol2tp.c @@ -783,14 +783,18 @@ static int pppol2tp_recvmsg(struct kiocb *iocb, struct socket *sock, err = 0; skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT, flags & MSG_DONTWAIT, &err); - if (skb) { - err = memcpy_toiovec(msg->msg_iov, (unsigned char *) skb->data, - skb->len); - if (err < 0) - goto do_skb_free; - err = skb->len; - } -do_skb_free: + if (!skb) + goto end; + + if (len > skb->len) + len = skb->len; + else if (len < skb->len) + msg->msg_flags |= MSG_TRUNC; + + err = skb_copy_datagram_iovec(skb, 0, msg->msg_iov, len); + if (likely(err == 0)) + err = len; + kfree_skb(skb); end: return err; -- cgit v0.10.2 From 45d465bc237ab1e1ebb4c65b9b318830dafb7509 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Tue, 10 Jun 2008 12:37:42 -0700 Subject: ipv4: Remove unused declaration from include/net/tcp.h. - The tcp_unhash() method in /include/net/tcp.h is no more needed, as the unhash method in tcp_prot structure is now inet_unhash (instead of tcp_unhash in the past); see tcp_prot structure in net/ipv4/tcp_ipv4.c. - So, this patch removes tcp_unhash() declaration from include/net/tcp.h Signed-off-by: Rami Rosen Signed-off-by: David S. Miller diff --git a/include/net/tcp.h b/include/net/tcp.h index 633147c..d448310 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -433,7 +433,6 @@ extern struct sk_buff * tcp_make_synack(struct sock *sk, extern int tcp_disconnect(struct sock *sk, int flags); -extern void tcp_unhash(struct sock *sk); /* From syncookies.c */ extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS]; -- cgit v0.10.2 From ce4a7d0d48bbaed78ccbb0bafb9229651a40303a Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Tue, 10 Jun 2008 12:39:35 -0700 Subject: inet{6}_request_sock: Init ->opt and ->pktopts in the constructor Wei Yongjun noticed that we may call reqsk_free on request sock objects where the opt fields may not be initialized, fix it by introducing inet_reqsk_alloc where we initialize ->opt to NULL and set ->pktopts to NULL in inet6_reqsk_alloc. Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: David S. Miller diff --git a/include/linux/ipv6.h b/include/linux/ipv6.h index 10b666b..cde056e 100644 --- a/include/linux/ipv6.h +++ b/include/linux/ipv6.h @@ -396,8 +396,10 @@ static inline struct request_sock *inet6_reqsk_alloc(struct request_sock_ops *op { struct request_sock *req = reqsk_alloc(ops); - if (req != NULL) + if (req != NULL) { inet_rsk(req)->inet6_rsk_offset = inet6_rsk_offset(req); + inet6_rsk(req)->pktopts = NULL; + } return req; } diff --git a/include/net/inet_sock.h b/include/net/inet_sock.h index a42cd63..9fabe5b 100644 --- a/include/net/inet_sock.h +++ b/include/net/inet_sock.h @@ -197,4 +197,14 @@ static inline int inet_iif(const struct sk_buff *skb) return skb->rtable->rt_iif; } +static inline struct request_sock *inet_reqsk_alloc(struct request_sock_ops *ops) +{ + struct request_sock *req = reqsk_alloc(ops); + + if (req != NULL) + inet_rsk(req)->opt = NULL; + + return req; +} + #endif /* _INET_SOCK_H */ diff --git a/net/dccp/ipv4.c b/net/dccp/ipv4.c index c22a378..37d27bc 100644 --- a/net/dccp/ipv4.c +++ b/net/dccp/ipv4.c @@ -589,7 +589,7 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb) if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1) goto drop; - req = reqsk_alloc(&dccp_request_sock_ops); + req = inet_reqsk_alloc(&dccp_request_sock_ops); if (req == NULL) goto drop; @@ -605,7 +605,6 @@ int dccp_v4_conn_request(struct sock *sk, struct sk_buff *skb) ireq = inet_rsk(req); ireq->loc_addr = ip_hdr(skb)->daddr; ireq->rmt_addr = ip_hdr(skb)->saddr; - ireq->opt = NULL; /* * Step 3: Process LISTEN state diff --git a/net/dccp/ipv6.c b/net/dccp/ipv6.c index 9b1129b..f7fe2a5 100644 --- a/net/dccp/ipv6.c +++ b/net/dccp/ipv6.c @@ -421,7 +421,6 @@ static int dccp_v6_conn_request(struct sock *sk, struct sk_buff *skb) ireq6 = inet6_rsk(req); ipv6_addr_copy(&ireq6->rmt_addr, &ipv6_hdr(skb)->saddr); ipv6_addr_copy(&ireq6->loc_addr, &ipv6_hdr(skb)->daddr); - ireq6->pktopts = NULL; if (ipv6_opt_accepted(sk, skb) || np->rxopt.bits.rxinfo || np->rxopt.bits.rxoinfo || diff --git a/net/ipv4/syncookies.c b/net/ipv4/syncookies.c index 73ba989..d182a2a 100644 --- a/net/ipv4/syncookies.c +++ b/net/ipv4/syncookies.c @@ -285,7 +285,7 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, cookie_check_timestamp(&tcp_opt); ret = NULL; - req = reqsk_alloc(&tcp_request_sock_ops); /* for safety */ + req = inet_reqsk_alloc(&tcp_request_sock_ops); /* for safety */ if (!req) goto out; @@ -301,7 +301,6 @@ struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, ireq->rmt_port = th->source; ireq->loc_addr = ip_hdr(skb)->daddr; ireq->rmt_addr = ip_hdr(skb)->saddr; - ireq->opt = NULL; ireq->snd_wscale = tcp_opt.snd_wscale; ireq->rcv_wscale = tcp_opt.rcv_wscale; ireq->sack_ok = tcp_opt.sack_ok; diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index cd601a8..4f8485c 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1285,7 +1285,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1) goto drop; - req = reqsk_alloc(&tcp_request_sock_ops); + req = inet_reqsk_alloc(&tcp_request_sock_ops); if (!req) goto drop; diff --git a/net/ipv6/syncookies.c b/net/ipv6/syncookies.c index 938ce4e..3ecc115 100644 --- a/net/ipv6/syncookies.c +++ b/net/ipv6/syncookies.c @@ -198,7 +198,6 @@ struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb) ireq = inet_rsk(req); ireq6 = inet6_rsk(req); treq = tcp_rsk(req); - ireq6->pktopts = NULL; if (security_inet_conn_request(sk, skb, req)) { reqsk_free(req); diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index 715965f..cb46749 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -1299,7 +1299,6 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) treq = inet6_rsk(req); ipv6_addr_copy(&treq->rmt_addr, &ipv6_hdr(skb)->saddr); ipv6_addr_copy(&treq->loc_addr, &ipv6_hdr(skb)->daddr); - treq->pktopts = NULL; if (!want_cookie) TCP_ECN_create_request(req, tcp_hdr(skb)); -- cgit v0.10.2 From b36ffc47a17ab5ce6d9589a99ac5d135c9173a9a Mon Sep 17 00:00:00 2001 From: Pradeep Singh Rautela Date: Tue, 10 Jun 2008 12:46:52 -0700 Subject: drivers/atm/eni.h: remove unused macro KERNEL_OFFSET KERNEL_OFFSET macro in eni.h is not required as it is not used anywhere. Remove the unused macro from eni.h header file. Signed-off-by: Pradeep Singh Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/atm/eni.h b/drivers/atm/eni.h index d04fefb..e4c9525 100644 --- a/drivers/atm/eni.h +++ b/drivers/atm/eni.h @@ -18,7 +18,6 @@ #include "midway.h" -#define KERNEL_OFFSET 0xC0000000 /* kernel 0x0 is at phys 0xC0000000 */ #define DEV_LABEL "eni" #define UBR_BUFFER (128*1024) /* UBR buffer size */ -- cgit v0.10.2 From 495b36b15e17fb08434e3800959434f06a1a6fbc Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 10 Jun 2008 12:49:31 -0700 Subject: isdn divas: fix proc creation 1. creating proc entry and not saving pointer to PDE and checking it is not going to work. 2. if proc entry wasn't created, no reason to remove it on error path. Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hardware/eicon/divasmain.c b/drivers/isdn/hardware/eicon/divasmain.c index 5fcbdcc..16a874b 100644 --- a/drivers/isdn/hardware/eicon/divasmain.c +++ b/drivers/isdn/hardware/eicon/divasmain.c @@ -806,7 +806,6 @@ static int DIVA_INIT_FUNCTION divas_init(void) if (!create_divas_proc()) { #ifdef MODULE - remove_divas_proc(); divas_unregister_chrdev(); divasfunc_exit(); #endif diff --git a/drivers/isdn/hardware/eicon/divasproc.c b/drivers/isdn/hardware/eicon/divasproc.c index fae8958..0408272 100644 --- a/drivers/isdn/hardware/eicon/divasproc.c +++ b/drivers/isdn/hardware/eicon/divasproc.c @@ -125,8 +125,8 @@ static const struct file_operations divas_fops = { int create_divas_proc(void) { - proc_create(divas_proc_name, S_IFREG | S_IRUGO, proc_net_eicon, - &divas_fops); + divas_proc_entry = proc_create(divas_proc_name, S_IFREG | S_IRUGO, + proc_net_eicon, &divas_fops); if (!divas_proc_entry) return (0); -- cgit v0.10.2 From ea23ec26727b4df97b4965715f0519b6ddc0aa4b Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Tue, 10 Jun 2008 12:50:14 -0700 Subject: isdn: use simple_read_from_buffer() Signed-off-by: Akinobu Mita Acked-by: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: David S. Miller diff --git a/drivers/isdn/hysdn/hysdn_procconf.c b/drivers/isdn/hysdn/hysdn_procconf.c index 15906d0..484299b 100644 --- a/drivers/isdn/hysdn/hysdn_procconf.c +++ b/drivers/isdn/hysdn/hysdn_procconf.c @@ -207,30 +207,17 @@ hysdn_conf_write(struct file *file, const char __user *buf, size_t count, loff_t /* read conf file -> output card info data */ /*******************************************/ static ssize_t -hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t * off) +hysdn_conf_read(struct file *file, char __user *buf, size_t count, loff_t *off) { char *cp; - int i; - if (file->f_mode & FMODE_READ) { - if (!(cp = file->private_data)) - return (-EFAULT); /* should never happen */ - i = strlen(cp); /* get total string length */ - if (*off < i) { - /* still bytes to transfer */ - cp += *off; /* point to desired data offset */ - i -= *off; /* remaining length */ - if (i > count) - i = count; /* limit length to transfer */ - if (copy_to_user(buf, cp, i)) - return (-EFAULT); /* copy error */ - *off += i; /* adjust offset */ - } else - return (0); - } else - return (-EPERM); /* no permission to read */ - - return (i); + if (!(file->f_mode & FMODE_READ)) + return -EPERM; /* no permission to read */ + + if (!(cp = file->private_data)) + return -EFAULT; /* should never happen */ + + return simple_read_from_buffer(buf, count, off, cp, strlen(cp)); } /* hysdn_conf_read */ /******************/ -- cgit v0.10.2 From 392fdb0e35055b96faa9c1cd6ab537805337cdce Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jun 2008 14:07:25 -0700 Subject: net pppoe: Check packet length on all receive paths The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index 58a26a4..d89ccfd 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -341,12 +341,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) struct pppox_sock *relay_po; if (sk->sk_state & PPPOX_BOUND) { - struct pppoe_hdr *ph = pppoe_hdr(skb); - int len = ntohs(ph->length); - skb_pull_rcsum(skb, sizeof(struct pppoe_hdr)); - if (pskb_trim_rcsum(skb, len)) - goto abort_kfree; - ppp_input(&po->chan, skb); } else if (sk->sk_state & PPPOX_RELAY) { relay_po = get_item_by_addr(&po->pppoe_relay); @@ -357,7 +351,6 @@ static int pppoe_rcv_core(struct sock *sk, struct sk_buff *skb) if ((sk_pppox(relay_po)->sk_state & PPPOX_CONNECTED) == 0) goto abort_put; - skb_pull(skb, sizeof(struct pppoe_hdr)); if (!__pppoe_xmit(sk_pppox(relay_po), skb)) goto abort_put; } else { @@ -388,6 +381,7 @@ static int pppoe_rcv(struct sk_buff *skb, { struct pppoe_hdr *ph; struct pppox_sock *po; + int len; if (!(skb = skb_share_check(skb, GFP_ATOMIC))) goto out; @@ -399,10 +393,21 @@ static int pppoe_rcv(struct sk_buff *skb, goto drop; ph = pppoe_hdr(skb); + len = ntohs(ph->length); + + skb_pull_rcsum(skb, sizeof(*ph)); + if (skb->len < len) + goto drop; po = get_item(ph->sid, eth_hdr(skb)->h_source, dev->ifindex); - if (po != NULL) - return sk_receive_skb(sk_pppox(po), skb, 0); + if (!po) + goto drop; + + if (pskb_trim_rcsum(skb, len)) + goto drop; + + return sk_receive_skb(sk_pppox(po), skb, 0); + drop: kfree_skb(skb); out: @@ -937,12 +942,10 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock, m->msg_namelen = 0; if (skb) { - struct pppoe_hdr *ph = pppoe_hdr(skb); - const int len = ntohs(ph->length); - - error = memcpy_toiovec(m->msg_iov, (unsigned char *) &ph->tag[0], len); + total_len = min(total_len, skb->len); + error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len); if (error == 0) - error = len; + error = total_len; } kfree_skb(skb); -- cgit v0.10.2 From bc6cffd177f9266af38dba96a2cea06c1e7ff932 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 10 Jun 2008 14:08:25 -0700 Subject: pppoe: Unshare skb before anything else We need to unshare the skb first as otherwise pskb_may_pull may write to a shared skb which could be bad. Signed-off-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index d89ccfd..bafb69b 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -432,12 +432,12 @@ static int pppoe_disc_rcv(struct sk_buff *skb, if (dev_net(dev) != &init_net) goto abort; - if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) - goto abort; - if (!(skb = skb_share_check(skb, GFP_ATOMIC))) goto out; + if (!pskb_may_pull(skb, sizeof(struct pppoe_hdr))) + goto abort; + ph = pppoe_hdr(skb); if (ph->code != PADT_CODE) goto abort; -- cgit v0.10.2 From 738eca74d1bd3e51180de179b7b74d4e34c4e5a3 Mon Sep 17 00:00:00 2001 From: Robert Reif Date: Tue, 10 Jun 2008 14:13:09 -0700 Subject: sparc: get leo framebuffer working This patch fixes several issues: Use the right openprom device name so the driver is actually loaded. Fix a crash due to unitialized info->pseudo_palette. Put the framebuffer in the proper mode for software rendering. checkpatch cleanups. Hardware acceleration was removed when the driver was rewritten for the new framebuffer API in 2003. Software rendering requires a different framebuffer access mode but that wasn't changed. The driver now works again but is slow. The proper fix is to reintroduce hardware acceleration. Signed-off-by: Robert Reif Signed-off-by: David S. Miller diff --git a/drivers/video/leo.c b/drivers/video/leo.c index 8bc46e9..13fea61 100644 --- a/drivers/video/leo.c +++ b/drivers/video/leo.c @@ -17,8 +17,8 @@ #include #include #include +#include -#include #include #include "sbuslib.h" @@ -33,7 +33,6 @@ static int leo_blank(int, struct fb_info *); static int leo_mmap(struct fb_info *, struct vm_area_struct *); static int leo_ioctl(struct fb_info *, unsigned int, unsigned long); -static int leo_pan_display(struct fb_var_screeninfo *, struct fb_info *); /* * Frame buffer operations @@ -43,7 +42,6 @@ static struct fb_ops leo_ops = { .owner = THIS_MODULE, .fb_setcolreg = leo_setcolreg, .fb_blank = leo_blank, - .fb_pan_display = leo_pan_display, .fb_fillrect = cfb_fillrect, .fb_copyarea = cfb_copyarea, .fb_imageblit = cfb_imageblit, @@ -78,7 +76,7 @@ static struct fb_ops leo_ops = { #define LEO_CUR_TYPE_CMAP 0x00000050 struct leo_cursor { - u8 xxx0[16]; + u8 xxx0[16]; u32 cur_type; u32 cur_misc; u32 cur_cursxy; @@ -105,7 +103,7 @@ struct leo_lx_krn { struct leo_lc_ss0_krn { u32 misc; - u8 xxx0[0x800-4]; + u8 xxx0[0x800-4]; u32 rev; }; @@ -116,7 +114,7 @@ struct leo_lc_ss0_usr { u32 fontt; u32 extent; u32 src; - u32 dst; + u32 dst; u32 copy; u32 fill; }; @@ -129,8 +127,8 @@ struct leo_lc_ss1_usr { u8 unknown; }; -struct leo_ld { - u8 xxx0[0xe00]; +struct leo_ld_ss0 { + u8 xxx0[0xe00]; u32 csr; u32 wid; u32 wmask; @@ -144,13 +142,13 @@ struct leo_ld { u32 src; /* Copy/Scroll (SS0 only) */ u32 dst; /* Copy/Scroll/Fill (SS0 only) */ u32 extent; /* Copy/Scroll/Fill size (SS0 only) */ - u32 xxx1[3]; + u32 xxx1[3]; u32 setsem; /* SS1 only */ u32 clrsem; /* SS1 only */ u32 clrpick; /* SS1 only */ u32 clrdat; /* SS1 only */ u32 alpha; /* SS1 only */ - u8 xxx2[0x2c]; + u8 xxx2[0x2c]; u32 winbg; u32 planemask; u32 rop; @@ -199,11 +197,12 @@ struct leo_par { static void leo_wait(struct leo_lx_krn __iomem *lx_krn) { int i; - + for (i = 0; - (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && i < 300000; + (sbus_readl(&lx_krn->krn_csr) & LEO_KRN_CSR_PROGRESS) && + i < 300000; i++) - udelay (1); /* Busy wait at most 0.3 sec */ + udelay(1); /* Busy wait at most 0.3 sec */ return; } @@ -221,7 +220,7 @@ static int leo_setcolreg(unsigned regno, unsigned transp, struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_lx_krn __iomem *lx_krn = par->lx_krn; + struct leo_lx_krn __iomem *lx_krn = par->lx_krn; unsigned long flags; u32 val; int i; @@ -408,7 +407,7 @@ static void leo_wid_put(struct fb_info *info, struct fb_wid_list *wl) leo_wait(lx_krn); for (i = 0, wi = wl->wl_list; i < wl->wl_count; i++, wi++) { - switch(wi->wi_type) { + switch (wi->wi_type) { case FB_WID_DBL_8: j = (wi->wi_index & 0xf) + 0x40; break; @@ -453,13 +452,12 @@ static void leo_init_wids(struct fb_info *info) wi.wi_index = 1; wi.wi_values [0] = 0x30; leo_wid_put(info, &wl); - } static void leo_switch_from_graph(struct fb_info *info) { struct leo_par *par = (struct leo_par *) info->par; - struct leo_ld __iomem *ss = (struct leo_ld __iomem *) par->ld_ss0; + struct leo_ld_ss0 __iomem *ss = par->ld_ss0; unsigned long flags; u32 val; @@ -485,19 +483,13 @@ static void leo_switch_from_graph(struct fb_info *info) val = sbus_readl(&par->lc_ss0_usr->csr); } while (val & 0x20000000); - spin_unlock_irqrestore(&par->lock, flags); -} - -static int leo_pan_display(struct fb_var_screeninfo *var, struct fb_info *info) -{ - /* We just use this to catch switches out of - * graphics mode. - */ - leo_switch_from_graph(info); + /* setup screen buffer for cfb_* functions */ + sbus_writel(1, &ss->wid); + sbus_writel(0x00ffffff, &ss->planemask); + sbus_writel(0x310b90, &ss->rop); + sbus_writel(0, &par->lc_ss0_usr->addrspace); - if (var->xoffset || var->yoffset || var->vmode) - return -EINVAL; - return 0; + spin_unlock_irqrestore(&par->lock, flags); } static void leo_init_hw(struct fb_info *info) @@ -542,7 +534,8 @@ static void leo_unmap_regs(struct of_device *op, struct fb_info *info, of_iounmap(&op->resource[0], info->screen_base, 0x800000); } -static int __devinit leo_probe(struct of_device *op, const struct of_device_id *match) +static int __devinit leo_probe(struct of_device *op, + const struct of_device_id *match) { struct device_node *dp = op->node; struct fb_info *info; @@ -594,8 +587,9 @@ static int __devinit leo_probe(struct of_device *op, const struct of_device_id * !info->screen_base) goto out_unmap_regs; - info->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN; + info->flags = FBINFO_DEFAULT; info->fbops = &leo_ops; + info->pseudo_palette = par->clut_data; leo_init_wids(info); leo_init_hw(info); @@ -649,7 +643,7 @@ static int __devexit leo_remove(struct of_device *op) static struct of_device_id leo_match[] = { { - .name = "leo", + .name = "SUNW,leo", }, {}, }; -- cgit v0.10.2 From dbdbb87636e882042cbe53d5d4eac94206f8db83 Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 10 Jun 2008 21:21:56 +0000 Subject: [CIFS] Fix hang in mount when negprot causes server to kill tcp session Acked-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES index 28e3d5c..1f34652 100644 --- a/fs/cifs/CHANGES +++ b/fs/cifs/CHANGES @@ -2,6 +2,11 @@ Version 1.53 ------------ DFS support added (Microsoft Distributed File System client support needed for referrals which enable a hierarchical name space among servers). +Disable temporary caching of mode bits to servers which do not support +storing of mode (e.g. Windows servers, when client mounts without cifsacl +mount option) and add new "dynperm" mount option to enable temporary caching +of mode (enable old behavior). Fix hang on mount caused when server crashes +tcp session during negotiate protocol. Version 1.52 ------------ diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index d49e274..e8fa46c 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -653,6 +653,7 @@ multi_t2_fnd: spin_lock(&GlobalMid_Lock); server->tcpStatus = CifsExiting; spin_unlock(&GlobalMid_Lock); + wake_up_all(&server->response_q); /* don't exit until kthread_stop is called */ set_current_state(TASK_UNINTERRUPTIBLE); -- cgit v0.10.2 From 99c6f60e72f112b57ddb07abb2e5f771ee211f43 Mon Sep 17 00:00:00 2001 From: Jamal Hadi Salim Date: Tue, 10 Jun 2008 14:25:34 -0700 Subject: ipsec: pfkey should ignore events when no listeners When pfkey has no km listeners, it still does a lot of work before finding out there aint nobody out there. If a tree falls in a forest and no one is around to hear it, does it make a sound? In this case it makes a lot of noise: With this short-circuit adding 10s of thousands of SAs using netlink improves performance by ~10%. Signed-off-by: Jamal Hadi Salim Signed-off-by: David S. Miller diff --git a/net/key/af_key.c b/net/key/af_key.c index 9bba7ac..7470e36 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -3030,6 +3030,9 @@ static int key_notify_sa_expire(struct xfrm_state *x, struct km_event *c) static int pfkey_send_notify(struct xfrm_state *x, struct km_event *c) { + if (atomic_read(&pfkey_socks_nr) == 0) + return 0; + switch (c->event) { case XFRM_MSG_EXPIRE: return key_notify_sa_expire(x, c); -- cgit v0.10.2 From 79ee9a8b2d328243488fee8b55bfacc822049a2a Mon Sep 17 00:00:00 2001 From: Steve French Date: Tue, 10 Jun 2008 21:37:02 +0000 Subject: [CIFS] cifs: fix oops on mount when CONFIG_CIFS_DFS_UPCALL is enabled simple "mount -t cifs //xxx /mnt" oopsed on strlen of options http://kerneloops.org/guilty.php?guilty=cifs_get_sb&version=2.6.25-release&start=16711 \ 68&end=1703935&class=oops Signed-off-by: Marcin Slusarz Acked-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index 5df93fd..86b4d5f 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -97,9 +97,6 @@ cifs_read_super(struct super_block *sb, void *data, { struct inode *inode; struct cifs_sb_info *cifs_sb; -#ifdef CONFIG_CIFS_DFS_UPCALL - int len; -#endif int rc = 0; /* BB should we make this contingent on mount parm? */ @@ -117,15 +114,17 @@ cifs_read_super(struct super_block *sb, void *data, * complex operation (mount), and in case of fail * just exit instead of doing mount and attempting * undo it if this copy fails?*/ - len = strlen(data); - cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL); - if (cifs_sb->mountdata == NULL) { - kfree(sb->s_fs_info); - sb->s_fs_info = NULL; - return -ENOMEM; + if (data) { + int len = strlen(data); + cifs_sb->mountdata = kzalloc(len + 1, GFP_KERNEL); + if (cifs_sb->mountdata == NULL) { + kfree(sb->s_fs_info); + sb->s_fs_info = NULL; + return -ENOMEM; + } + strncpy(cifs_sb->mountdata, data, len + 1); + cifs_sb->mountdata[len] = '\0'; } - strncpy(cifs_sb->mountdata, data, len + 1); - cifs_sb->mountdata[len] = '\0'; #endif rc = cifs_mount(sb, cifs_sb, data, devname); -- cgit v0.10.2 From 4db0ee176e256444695ee2d7b004552e82fec987 Mon Sep 17 00:00:00 2001 From: Ayaz Abdulla Date: Mon, 9 Jun 2008 16:51:06 -0700 Subject: forcedeth: msi interrupts Add a workaround for lost MSI interrupts. There is a race condition in the HW in which future interrupts could be missed. The workaround is to toggle the MSI irq mask. Added cleanup based on comments from Andrew Morton. Signed-off-by: Ayaz Abdulla Cc: Manfred Spraul Cc: Jeff Garzik Cc: Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/forcedeth.c b/drivers/net/forcedeth.c index 9eca97f..2cb2447 100644 --- a/drivers/net/forcedeth.c +++ b/drivers/net/forcedeth.c @@ -3273,6 +3273,20 @@ static void nv_link_irq(struct net_device *dev) dprintk(KERN_DEBUG "%s: link change notification done.\n", dev->name); } +static void nv_msi_workaround(struct fe_priv *np) +{ + + /* Need to toggle the msi irq mask within the ethernet device, + * otherwise, future interrupts will not be detected. + */ + if (np->msi_flags & NV_MSI_ENABLED) { + u8 __iomem *base = np->base; + + writel(0, base + NvRegMSIIrqMask); + writel(NVREG_MSI_VECTOR_0_ENABLED, base + NvRegMSIIrqMask); + } +} + static irqreturn_t nv_nic_irq(int foo, void *data) { struct net_device *dev = (struct net_device *) data; @@ -3295,6 +3309,8 @@ static irqreturn_t nv_nic_irq(int foo, void *data) if (!(events & np->irqmask)) break; + nv_msi_workaround(np); + spin_lock(&np->lock); nv_tx_done(dev); spin_unlock(&np->lock); @@ -3410,6 +3426,8 @@ static irqreturn_t nv_nic_irq_optimized(int foo, void *data) if (!(events & np->irqmask)) break; + nv_msi_workaround(np); + spin_lock(&np->lock); nv_tx_done_optimized(dev, TX_WORK_PER_LOOP); spin_unlock(&np->lock); @@ -3750,6 +3768,8 @@ static irqreturn_t nv_nic_irq_test(int foo, void *data) if (!(events & NVREG_IRQ_TIMER)) return IRQ_RETVAL(0); + nv_msi_workaround(np); + spin_lock(&np->lock); np->intr_test = 1; spin_unlock(&np->lock); -- cgit v0.10.2 From ff68cdbf86f09e602eb2b04e1a7d448a3c3a3b28 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Mon, 9 Jun 2008 15:57:17 -0700 Subject: ixgbe: fix typo Define names were accidently transposed. Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik diff --git a/drivers/net/ixgbe/ixgbe_82598.c b/drivers/net/ixgbe/ixgbe_82598.c index 6321b05..2f38e84 100644 --- a/drivers/net/ixgbe/ixgbe_82598.c +++ b/drivers/net/ixgbe/ixgbe_82598.c @@ -58,8 +58,8 @@ static s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw); static s32 ixgbe_get_invariants_82598(struct ixgbe_hw *hw) { - hw->mac.num_rx_queues = IXGBE_82598_MAX_TX_QUEUES; - hw->mac.num_tx_queues = IXGBE_82598_MAX_RX_QUEUES; + hw->mac.num_rx_queues = IXGBE_82598_MAX_RX_QUEUES; + hw->mac.num_tx_queues = IXGBE_82598_MAX_TX_QUEUES; hw->mac.num_rx_addrs = IXGBE_82598_RAR_ENTRIES; /* PHY ops are filled in by default properly for Fiber only */ -- cgit v0.10.2 From bf4d593479e0a3f349118f9b8c40a6bc37bf1e2e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 10 Jun 2008 01:22:16 +0300 Subject: add missing lance_* exports This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1203 modules ERROR: "lance_open" [drivers/net/mvme147.ko] undefined! ERROR: "lance_close" [drivers/net/mvme147.ko] undefined! ERROR: "lance_tx_timeout" [drivers/net/mvme147.ko] undefined! ERROR: "lance_set_multicast" [drivers/net/mvme147.ko] undefined! ERROR: "lance_start_xmit" [drivers/net/mvme147.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Jeff Garzik diff --git a/drivers/net/7990.c b/drivers/net/7990.c index 750a46f..ad6b8a5 100644 --- a/drivers/net/7990.c +++ b/drivers/net/7990.c @@ -506,6 +506,7 @@ int lance_open (struct net_device *dev) return res; } +EXPORT_SYMBOL_GPL(lance_open); int lance_close (struct net_device *dev) { @@ -521,6 +522,7 @@ int lance_close (struct net_device *dev) return 0; } +EXPORT_SYMBOL_GPL(lance_close); void lance_tx_timeout(struct net_device *dev) { @@ -529,7 +531,7 @@ void lance_tx_timeout(struct net_device *dev) dev->trans_start = jiffies; netif_wake_queue (dev); } - +EXPORT_SYMBOL_GPL(lance_tx_timeout); int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) { @@ -586,6 +588,7 @@ int lance_start_xmit (struct sk_buff *skb, struct net_device *dev) return 0; } +EXPORT_SYMBOL_GPL(lance_start_xmit); /* taken from the depca driver via a2065.c */ static void lance_load_multicast (struct net_device *dev) @@ -654,6 +657,7 @@ void lance_set_multicast (struct net_device *dev) if (!stopped) netif_start_queue (dev); } +EXPORT_SYMBOL_GPL(lance_set_multicast); #ifdef CONFIG_NET_POLL_CONTROLLER void lance_poll(struct net_device *dev) -- cgit v0.10.2 From 23bdfdd388723b8213f597743b1d4aba0d62de9c Mon Sep 17 00:00:00 2001 From: Steve Hodgson Date: Mon, 9 Jun 2008 19:34:32 +0100 Subject: sfc: Recover from RX queue flush failure RX queue flush can fail if traffic continues to arrive. Recover by performing an invisible reset. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sfc/falcon.c b/drivers/net/sfc/falcon.c index d3f749c..790db89 100644 --- a/drivers/net/sfc/falcon.c +++ b/drivers/net/sfc/falcon.c @@ -733,8 +733,10 @@ void falcon_fini_rx(struct efx_rx_queue *rx_queue) continue; break; } - if (rc) + if (rc) { EFX_ERR(efx, "failed to flush rx queue %d\n", rx_queue->queue); + efx_schedule_reset(efx, RESET_TYPE_INVISIBLE); + } /* Remove RX descriptor ring from card */ EFX_ZERO_OWORD(rx_desc_ptr); -- cgit v0.10.2 From 00aaea2f95d73d4e2b5e45cf77c3cbb16c59e87f Mon Sep 17 00:00:00 2001 From: Jan-Bernd Themann Date: Mon, 9 Jun 2008 15:17:37 +0100 Subject: ehea: set mac address fix eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: Jan-Bernd Themann Signed-off-by: Jeff Garzik diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 287a619..faae01d 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -1766,16 +1766,20 @@ static int ehea_set_mac_addr(struct net_device *dev, void *sa) mutex_lock(&ehea_bcmc_regs.lock); /* Deregister old MAC in pHYP */ - ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); - if (ret) - goto out_upregs; + if (port->state == EHEA_PORT_UP) { + ret = ehea_broadcast_reg_helper(port, H_DEREG_BCMC); + if (ret) + goto out_upregs; + } port->mac_addr = cb0->port_mac_addr << 16; /* Register new MAC in pHYP */ - ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); - if (ret) - goto out_upregs; + if (port->state == EHEA_PORT_UP) { + ret = ehea_broadcast_reg_helper(port, H_REG_BCMC); + if (ret) + goto out_upregs; + } ret = 0; -- cgit v0.10.2 From 23cde76d801246a702e7a84c3fe3d655b35c89a1 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:49:00 +1000 Subject: virtio_net: Fix skb->csum_start computation hdr->csum_start is the offset from the start of the ethernet header to the transport layer checksum field. skb->csum_start is the offset from skb->head. skb_partial_csum_set() assumes that skb->data points to the ethernet header - i.e. it computes skb->csum_start by adding the headroom to hdr->csum_start. Since eth_type_trans() skb_pull()s the ethernet header, skb_partial_csum_set() should be called before eth_type_trans(). (Without this patch, GSO packets from a guest to the world outside the host are corrupted). Signed-off-by: Mark McLoughlin Acked-by: Herbert Xu Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 5450eac..9a3b85e 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -94,9 +94,7 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb, BUG_ON(len > MAX_PACKET_LEN); skb_trim(skb, len); - skb->protocol = eth_type_trans(skb, dev); - pr_debug("Receiving skb proto 0x%04x len %i type %i\n", - ntohs(skb->protocol), skb->len, skb->pkt_type); + dev->stats.rx_bytes += skb->len; dev->stats.rx_packets++; @@ -106,6 +104,10 @@ static void receive_skb(struct net_device *dev, struct sk_buff *skb, goto frame_err; } + skb->protocol = eth_type_trans(skb, dev); + pr_debug("Receiving skb proto 0x%04x len %i type %i\n", + ntohs(skb->protocol), skb->len, skb->pkt_type); + if (hdr->gso_type != VIRTIO_NET_HDR_GSO_NONE) { pr_debug("GSO!\n"); switch (hdr->gso_type & ~VIRTIO_NET_HDR_GSO_ECN) { -- cgit v0.10.2 From 2506ece0c0bbd2fc19a4827b96dc52ea47e2ce4a Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:49:59 +1000 Subject: virtio: Fix typo in virtio_net_hdr comments Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 9405aa6..38c0571 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -38,7 +38,7 @@ struct virtio_net_hdr #define VIRTIO_NET_HDR_GSO_ECN 0x80 // TCP has ECN set __u8 gso_type; __u16 hdr_len; /* Ethernet + IP + tcp/udp hdrs */ - __u16 gso_size; /* Bytes to append to gso_hdr_len per frame */ + __u16 gso_size; /* Bytes to append to hdr_len per frame */ __u16 csum_start; /* Position to start checksumming from */ __u16 csum_offset; /* Offset after that to place checksum */ }; -- cgit v0.10.2 From 14c998f034bdc9a5bfa53bca18fbd0738cbc65e8 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 8 Jun 2008 20:50:56 +1000 Subject: virtio: virtio_net free transmit skbs in a timer virtio_net currently only frees old transmit skbs just before queueing new ones. If the queue is full, it then enables interrupts and waits for notification that more work has been performed. However, a side-effect of this scheme is that there are always xmit skbs left dangling when no new packets are sent, against the Documentation/networking/driver.txt guideline: "... it is not allowed for your TX mitigation scheme to let TX packets "hang out" in the TX ring unreclaimed forever if no new TX packets are sent." Add a timer to ensure that any time we queue new TX skbs, we will shortly free them again. This fixes an easily reproduced hang at shutdown where iptables attempts to unload nf_conntrack and nf_conntrack waits for an skb it is tracking to be freed, but virtio_net never frees it. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9a3b85e..156d76f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -44,6 +44,8 @@ struct virtnet_info /* The skb we couldn't send because buffers were full. */ struct sk_buff *last_xmit_skb; + struct timer_list xmit_free_timer; + /* Number of input buffers, and max we've ever had. */ unsigned int num, max; @@ -240,9 +242,23 @@ static void free_old_xmit_skbs(struct virtnet_info *vi) } } +static void xmit_free(unsigned long data) +{ + struct virtnet_info *vi = (void *)data; + + netif_tx_lock(vi->dev); + + free_old_xmit_skbs(vi); + + if (!skb_queue_empty(&vi->send)) + mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); + + netif_tx_unlock(vi->dev); +} + static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) { - int num; + int num, err; struct scatterlist sg[2+MAX_SKB_FRAGS]; struct virtio_net_hdr *hdr; const unsigned char *dest = ((struct ethhdr *)skb->data)->h_dest; @@ -285,7 +301,11 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) vnet_hdr_to_sg(sg, skb); num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; - return vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); + err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); + if (!err) + mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); + + return err; } static void xmit_tasklet(unsigned long data) @@ -456,6 +476,8 @@ static int virtnet_probe(struct virtio_device *vdev) tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); + setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); + err = register_netdev(dev); if (err) { pr_debug("virtio_net: registering device failed\n"); @@ -493,6 +515,8 @@ static void virtnet_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); + del_timer_sync(&vi->xmit_free_timer); + /* Free our skbs in send and recv queues, if any. */ while ((skb = __skb_dequeue(&vi->recv)) != NULL) { kfree_skb(skb); -- cgit v0.10.2 From 363f15149cfba67d29f1e6a6103dda079f27f3fa Mon Sep 17 00:00:00 2001 From: Rusty Russell Date: Sun, 8 Jun 2008 20:51:55 +1000 Subject: virtio: use callback on empty in virtio_net virtio_net uses a timer to free old transmitted packets, rather than leaving callbacks enabled all the time. If the host promises to always notify us when the transmit ring is empty, we can free packets at that point and avoid the timer. Signed-off-by: Rusty Russell Signed-off-by: Jeff Garzik diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 156d76f..4452306 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -44,6 +44,7 @@ struct virtnet_info /* The skb we couldn't send because buffers were full. */ struct sk_buff *last_xmit_skb; + /* If we need to free in a timer, this is it. */ struct timer_list xmit_free_timer; /* Number of input buffers, and max we've ever had. */ @@ -51,6 +52,7 @@ struct virtnet_info /* For cleaning up after transmission. */ struct tasklet_struct tasklet; + bool free_in_tasklet; /* Receive & send queues. */ struct sk_buff_head recv; @@ -74,7 +76,7 @@ static void skb_xmit_done(struct virtqueue *svq) /* Suppress further interrupts. */ svq->vq_ops->disable_cb(svq); - /* We were waiting for more output buffers. */ + /* We were probably waiting for more output buffers. */ netif_wake_queue(vi->dev); /* Make sure we re-xmit last_xmit_skb: if there are no more packets @@ -242,6 +244,8 @@ static void free_old_xmit_skbs(struct virtnet_info *vi) } } +/* If the virtio transport doesn't always notify us when all in-flight packets + * are consumed, we fall back to using this function on a timer to free them. */ static void xmit_free(unsigned long data) { struct virtnet_info *vi = (void *)data; @@ -302,7 +306,7 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb) num = skb_to_sgvec(skb, sg+1, 0, skb->len) + 1; err = vi->svq->vq_ops->add_buf(vi->svq, sg, num, 0, skb); - if (!err) + if (!err && !vi->free_in_tasklet) mod_timer(&vi->xmit_free_timer, jiffies + (HZ/10)); return err; @@ -317,6 +321,8 @@ static void xmit_tasklet(unsigned long data) vi->svq->vq_ops->kick(vi->svq); vi->last_xmit_skb = NULL; } + if (vi->free_in_tasklet) + free_old_xmit_skbs(vi); netif_tx_unlock_bh(vi->dev); } @@ -457,6 +463,10 @@ static int virtnet_probe(struct virtio_device *vdev) vi->vdev = vdev; vdev->priv = vi; + /* If they give us a callback when all buffers are done, we don't need + * the timer. */ + vi->free_in_tasklet = virtio_has_feature(vdev,VIRTIO_F_NOTIFY_ON_EMPTY); + /* We expect two virtqueues, receive then send. */ vi->rvq = vdev->config->find_vq(vdev, 0, skb_recv_done); if (IS_ERR(vi->rvq)) { @@ -476,7 +486,8 @@ static int virtnet_probe(struct virtio_device *vdev) tasklet_init(&vi->tasklet, xmit_tasklet, (unsigned long)vi); - setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); + if (!vi->free_in_tasklet) + setup_timer(&vi->xmit_free_timer, xmit_free, (unsigned long)vi); err = register_netdev(dev); if (err) { @@ -515,7 +526,8 @@ static void virtnet_remove(struct virtio_device *vdev) /* Stop all the virtqueues. */ vdev->config->reset(vdev); - del_timer_sync(&vi->xmit_free_timer); + if (!vi->free_in_tasklet) + del_timer_sync(&vi->xmit_free_timer); /* Free our skbs in send and recv queues, if any. */ while ((skb = __skb_dequeue(&vi->recv)) != NULL) { @@ -540,7 +552,7 @@ static struct virtio_device_id id_table[] = { static unsigned int features[] = { VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC, VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6, - VIRTIO_NET_F_HOST_ECN, + VIRTIO_NET_F_HOST_ECN, VIRTIO_F_NOTIFY_ON_EMPTY, }; static struct virtio_driver virtio_net = { -- cgit v0.10.2 From e5bd7be56787f8c5042081157fff983bcf0c8a42 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:44 +0200 Subject: qeth: layer 3 Oops in ip event handler The ip event handler may present us non qeth network interfaces. Add qeth card pointer check. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index 94a8ead..b041ea8 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2070,7 +2070,7 @@ static struct qeth_card *qeth_l3_get_card_from_dev(struct net_device *dev) card = netdev_priv(dev); else if (rc == QETH_VLAN_CARD) card = netdev_priv(vlan_dev_info(dev)->real_dev); - if (card->options.layer2) + if (card && card->options.layer2) card = NULL; QETH_DBF_TEXT_(TRACE, 4, "%d", rc); return card ; -- cgit v0.10.2 From f06f6f3224afdd7e58207d1f5950f4666c5f095f Mon Sep 17 00:00:00 2001 From: Cornelia Huck Date: Fri, 6 Jun 2008 12:37:45 +0200 Subject: qeth: Use ccw_device_get_id(). Get the devno from the ccw device via ccw_device_get_id() instead of parsing the bus_id. Signed-off-by: Cornelia Huck Signed-off-by: Martin Schwidefsky Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 436bf1f..5a71ae9 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -1407,12 +1407,6 @@ static void qeth_init_func_level(struct qeth_card *card) } } -static inline __u16 qeth_raw_devno_from_bus_id(char *id) -{ - id += (strlen(id) - 4); - return (__u16) simple_strtoul(id, &id, 16); -} - static int qeth_idx_activate_get_answer(struct qeth_channel *channel, void (*idx_reply_cb)(struct qeth_channel *, struct qeth_cmd_buffer *)) @@ -1468,6 +1462,7 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, __u16 temp; __u8 tmp; int rc; + struct ccw_dev_id temp_devid; card = CARD_FROM_CDEV(channel->ccwdev); @@ -1494,8 +1489,8 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, &card->token.issuer_rm_w, QETH_MPC_TOKEN_LENGTH); memcpy(QETH_IDX_ACT_FUNC_LEVEL(iob->data), &card->info.func_level, sizeof(__u16)); - temp = qeth_raw_devno_from_bus_id(CARD_DDEV_ID(card)); - memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp, 2); + ccw_device_get_id(CARD_DDEV(card), &temp_devid); + memcpy(QETH_IDX_ACT_QDIO_DEV_CUA(iob->data), &temp_devid.devno, 2); temp = (card->info.cula << 8) + card->info.unit_addr2; memcpy(QETH_IDX_ACT_QDIO_DEV_REALADDR(iob->data), &temp, 2); diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index 86ec50d..d35a74c 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -101,19 +101,16 @@ static struct net_device *qeth_l2_netdev_by_devno(unsigned char *read_dev_no) { struct qeth_card *card; struct net_device *ndev; - unsigned char *readno; - __u16 temp_dev_no, card_dev_no; - char *endp; + __u16 temp_dev_no; unsigned long flags; + struct ccw_dev_id read_devid; ndev = NULL; memcpy(&temp_dev_no, read_dev_no, 2); read_lock_irqsave(&qeth_core_card_list.rwlock, flags); list_for_each_entry(card, &qeth_core_card_list.list, list) { - readno = CARD_RDEV_ID(card); - readno += (strlen(readno) - 4); - card_dev_no = simple_strtoul(readno, &endp, 16); - if (card_dev_no == temp_dev_no) { + ccw_device_get_id(CARD_RDEV(card), &read_devid); + if (read_devid.devno == temp_dev_no) { ndev = card->dev; break; } -- cgit v0.10.2 From 14cc21b6770972e5d1487dbf3a2caaf63cae909a Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:46 +0200 Subject: qeth: reduce number of kernel messages Remove unnecessary messages. Write important debug information to s390dbf. Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index 5a71ae9..f428d75 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -290,9 +290,6 @@ int qeth_set_large_send(struct qeth_card *card, card->dev->features |= NETIF_F_TSO | NETIF_F_SG | NETIF_F_HW_CSUM; } else { - PRINT_WARN("TSO not supported on %s. " - "large_send set to 'no'.\n", - card->dev->name); card->dev->features &= ~(NETIF_F_TSO | NETIF_F_SG | NETIF_F_HW_CSUM); card->options.large_send = QETH_LARGE_SEND_NO; @@ -1433,7 +1430,7 @@ static int qeth_idx_activate_get_answer(struct qeth_channel *channel, spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); if (rc) { - PRINT_ERR("Error2 in activating channel rc=%d\n", rc); + QETH_DBF_MESSAGE(2, "Error2 in activating channel rc=%d\n", rc); QETH_DBF_TEXT_(SETUP, 2, "2err%d", rc); atomic_set(&channel->irq_pending, 0); wake_up(&card->wait_q); @@ -1503,7 +1500,8 @@ static int qeth_idx_activate_channel(struct qeth_channel *channel, spin_unlock_irqrestore(get_ccwdev_lock(channel->ccwdev), flags); if (rc) { - PRINT_ERR("Error1 in activating channel. rc=%d\n", rc); + QETH_DBF_MESSAGE(2, "Error1 in activating channel. rc=%d\n", + rc); QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); atomic_set(&channel->irq_pending, 0); wake_up(&card->wait_q); @@ -1653,7 +1651,6 @@ int qeth_send_control_data(struct qeth_card *card, int len, reply = qeth_alloc_reply(card); if (!reply) { - PRINT_WARN("Could not alloc qeth_reply!\n"); return -ENOMEM; } reply->callback = reply_cb; @@ -2607,15 +2604,9 @@ void qeth_queue_input_buffer(struct qeth_card *card, int index) if (newcount < count) { /* we are in memory shortage so we switch back to traditional skb allocation and drop packages */ - if (!atomic_read(&card->force_alloc_skb) && - net_ratelimit()) - PRINT_WARN("Switch to alloc skb\n"); atomic_set(&card->force_alloc_skb, 3); count = newcount; } else { - if ((atomic_read(&card->force_alloc_skb) == 1) && - net_ratelimit()) - PRINT_WARN("Switch to sg\n"); atomic_add_unless(&card->force_alloc_skb, -1, 0); } @@ -3029,7 +3020,7 @@ int qeth_get_elements_no(struct qeth_card *card, void *hdr, elements_needed = 1 + (((((unsigned long) hdr) % PAGE_SIZE) + skb->len) >> PAGE_SHIFT); if ((elements_needed + elems) > QETH_MAX_BUFFER_ELEMENTS(card)) { - PRINT_ERR("Invalid size of IP packet " + QETH_DBF_MESSAGE(2, "Invalid size of IP packet " "(Number=%d / Length=%d). Discarded.\n", (elements_needed+elems), skb->len); return 0; @@ -3242,8 +3233,6 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, * free buffers) to handle eddp context */ if (qeth_eddp_check_buffers_for_context(queue, ctx) < 0) { - if (net_ratelimit()) - PRINT_WARN("eddp tx_dropped 1\n"); rc = -EBUSY; goto out; } @@ -3255,7 +3244,6 @@ int qeth_do_send_packet(struct qeth_card *card, struct qeth_qdio_out_q *queue, tmp = qeth_eddp_fill_buffer(queue, ctx, queue->next_buf_to_fill); if (tmp < 0) { - PRINT_ERR("eddp tx_dropped 2\n"); rc = -EBUSY; goto out; } @@ -3597,8 +3585,6 @@ int qeth_snmp_command(struct qeth_card *card, char __user *udata) if ((!qeth_adp_supported(card, IPA_SETADP_SET_SNMP_CONTROL)) && (!card->options.layer2)) { - PRINT_WARN("SNMP Query MIBS not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } /* skip 4 bytes (data_len struct member) to get req_len */ @@ -3629,7 +3615,7 @@ int qeth_snmp_command(struct qeth_card *card, char __user *udata) rc = qeth_send_ipa_snmp_cmd(card, iob, QETH_SETADP_BASE_LEN + req_len, qeth_snmp_command_cb, (void *)&qinfo); if (rc) - PRINT_WARN("SNMP command failed on %s: (0x%x)\n", + QETH_DBF_MESSAGE(2, "SNMP command failed on %s: (0x%x)\n", QETH_CARD_IFNAME(card), rc); else { if (copy_to_user(udata, qinfo.udata, qinfo.udata_len)) @@ -3802,8 +3788,8 @@ retry: if (mpno) mpno = min(mpno - 1, QETH_MAX_PORTNO); if (card->info.portno > mpno) { - PRINT_ERR("Device %s does not offer port number %d \n.", - CARD_BUS_ID(card), card->info.portno); + QETH_DBF_MESSAGE(2, "Device %s does not offer port number %d" + "\n.", CARD_BUS_ID(card), card->info.portno); rc = -ENODEV; goto out; } @@ -3980,8 +3966,6 @@ struct sk_buff *qeth_core_get_next_skb(struct qeth_card *card, return skb; no_mem: if (net_ratelimit()) { - PRINT_WARN("No memory for packet received on %s.\n", - QETH_CARD_IFNAME(card)); QETH_DBF_TEXT(TRACE, 2, "noskbmem"); QETH_DBF_TEXT_(TRACE, 2, "%s", CARD_BUS_ID(card)); } diff --git a/drivers/s390/net/qeth_core_offl.c b/drivers/s390/net/qeth_core_offl.c index 822df83..452874e 100644 --- a/drivers/s390/net/qeth_core_offl.c +++ b/drivers/s390/net/qeth_core_offl.c @@ -122,8 +122,8 @@ int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, if (element == 0) return -EBUSY; else { - PRINT_WARN("could only partially fill eddp " - "buffer!\n"); + QETH_DBF_MESSAGE(2, "could only partially fill" + "eddp buffer!\n"); goto out; } } @@ -143,8 +143,6 @@ int qeth_eddp_fill_buffer(struct qeth_qdio_out_q *queue, if (must_refcnt) { must_refcnt = 0; if (qeth_eddp_buf_ref_context(buf, ctx)) { - PRINT_WARN("no memory to create eddp context " - "reference\n"); goto out_check; } } diff --git a/drivers/s390/net/qeth_core_sys.c b/drivers/s390/net/qeth_core_sys.c index 08a50f0..c26e842 100644 --- a/drivers/s390/net/qeth_core_sys.c +++ b/drivers/s390/net/qeth_core_sys.c @@ -129,7 +129,6 @@ static ssize_t qeth_dev_portno_store(struct device *dev, portno = simple_strtoul(buf, &tmp, 16); if (portno > QETH_MAX_PORTNO) { - PRINT_WARN("portno 0x%X is out of range\n", portno); return -EINVAL; } @@ -223,8 +222,6 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, * if though we have to permit priority queueing */ if (card->qdio.no_out_queues == 1) { - PRINT_WARN("Priority queueing disabled due " - "to hardware limitations!\n"); card->qdio.do_prio_queueing = QETH_PRIOQ_DEFAULT; return -EPERM; } @@ -250,7 +247,6 @@ static ssize_t qeth_dev_prioqing_store(struct device *dev, card->qdio.do_prio_queueing = QETH_NO_PRIO_QUEUEING; card->qdio.default_out_queue = QETH_DEFAULT_QUEUE; } else { - PRINT_WARN("Unknown queueing type '%s'\n", tmp); return -EINVAL; } return count; @@ -291,9 +287,6 @@ static ssize_t qeth_dev_bufcnt_store(struct device *dev, ((cnt > QETH_IN_BUF_COUNT_MAX) ? QETH_IN_BUF_COUNT_MAX : cnt); if (old_cnt != cnt) { rc = qeth_realloc_buffer_pool(card, cnt); - if (rc) - PRINT_WARN("Error (%d) while setting " - "buffer count.\n", rc); } return count; } @@ -355,7 +348,6 @@ static ssize_t qeth_dev_performance_stats_store(struct device *dev, card->perf_stats.initial_rx_packets = card->stats.rx_packets; card->perf_stats.initial_tx_packets = card->stats.tx_packets; } else { - PRINT_WARN("performance_stats: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -399,7 +391,6 @@ static ssize_t qeth_dev_layer2_store(struct device *dev, newdis = QETH_DISCIPLINE_LAYER2; break; default: - PRINT_WARN("layer2: write 0 or 1 to this file!\n"); return -EINVAL; } @@ -463,7 +454,6 @@ static ssize_t qeth_dev_large_send_store(struct device *dev, } else if (!strcmp(tmp, "TSO")) { type = QETH_LARGE_SEND_TSO; } else { - PRINT_WARN("large_send: invalid mode %s!\n", tmp); return -EINVAL; } if (card->options.large_send == type) @@ -503,8 +493,6 @@ static ssize_t qeth_dev_blkt_store(struct qeth_card *card, if (i <= max_value) { *value = i; } else { - PRINT_WARN("blkt total time: write values between" - " 0 and %d to this file!\n", max_value); return -EINVAL; } return count; diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index d35a74c..dd7659c 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -131,14 +131,14 @@ static int qeth_l2_send_setgroupmac_cb(struct qeth_card *card, mac = &cmd->data.setdelmac.mac[0]; /* MAC already registered, needed in couple/uncouple case */ if (cmd->hdr.return_code == 0x2005) { - PRINT_WARN("Group MAC %02x:%02x:%02x:%02x:%02x:%02x " \ + QETH_DBF_MESSAGE(2, "Group MAC %02x:%02x:%02x:%02x:%02x:%02x " "already existing on %s \n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card)); cmd->hdr.return_code = 0; } if (cmd->hdr.return_code) - PRINT_ERR("Could not set group MAC " \ + QETH_DBF_MESSAGE(2, "Could not set group MAC " "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card), cmd->hdr.return_code); @@ -163,7 +163,7 @@ static int qeth_l2_send_delgroupmac_cb(struct qeth_card *card, cmd = (struct qeth_ipa_cmd *) data; mac = &cmd->data.setdelmac.mac[0]; if (cmd->hdr.return_code) - PRINT_ERR("Could not delete group MAC " \ + QETH_DBF_MESSAGE(2, "Could not delete group MAC " "%02x:%02x:%02x:%02x:%02x:%02x on %s: %x\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5], QETH_CARD_IFNAME(card), cmd->hdr.return_code); @@ -183,10 +183,8 @@ static void qeth_l2_add_mc(struct qeth_card *card, __u8 *mac) mc = kmalloc(sizeof(struct qeth_mc_mac), GFP_ATOMIC); - if (!mc) { - PRINT_ERR("no mem vor mc mac address\n"); + if (!mc) return; - } memcpy(mc->mc_addr, mac, OSA_ADDR_LEN); mc->mc_addrlen = OSA_ADDR_LEN; @@ -277,7 +275,7 @@ static int qeth_l2_send_setdelvlan_cb(struct qeth_card *card, QETH_DBF_TEXT(TRACE, 2, "L2sdvcb"); cmd = (struct qeth_ipa_cmd *) data; if (cmd->hdr.return_code) { - PRINT_ERR("Error in processing VLAN %i on %s: 0x%x. " + QETH_DBF_MESSAGE(2, "Error in processing VLAN %i on %s: 0x%x. " "Continuing\n", cmd->data.setdelvlan.vlan_id, QETH_CARD_IFNAME(card), cmd->hdr.return_code); QETH_DBF_TEXT_(TRACE, 2, "L2VL%4x", cmd->hdr.command); @@ -330,8 +328,6 @@ static void qeth_l2_vlan_rx_add_vid(struct net_device *dev, unsigned short vid) spin_lock_bh(&card->vlanlock); list_add_tail(&id->list, &card->vid_list); spin_unlock_bh(&card->vlanlock); - } else { - PRINT_ERR("no memory for vid\n"); } } @@ -547,16 +543,15 @@ static int qeth_l2_request_initial_mac(struct qeth_card *card) rc = qeth_query_setadapterparms(card); if (rc) { - PRINT_WARN("could not query adapter parameters on device %s: " - "x%x\n", CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "could not query adapter parameters on " + "device %s: x%x\n", CARD_BUS_ID(card), rc); } if (card->info.guestlan) { rc = qeth_setadpparms_change_macaddr(card); if (rc) { - PRINT_WARN("couldn't get MAC address on " - "device %s: x%x\n", - CARD_BUS_ID(card), rc); + QETH_DBF_MESSAGE(2, "couldn't get MAC address on " + "device %s: x%x\n", CARD_BUS_ID(card), rc); QETH_DBF_TEXT_(SETUP, 2, "1err%d", rc); return rc; } @@ -582,8 +577,6 @@ static int qeth_l2_set_mac_address(struct net_device *dev, void *p) } if (card->info.type == QETH_CARD_TYPE_OSN) { - PRINT_WARN("Setting MAC address on %s is not supported.\n", - dev->name); QETH_DBF_TEXT(TRACE, 3, "setmcOSN"); return -EOPNOTSUPP; } @@ -663,7 +656,7 @@ static int qeth_l2_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ctx = qeth_eddp_create_context(card, new_skb, hdr, skb->sk->sk_protocol); if (ctx == NULL) { - PRINT_WARN("could not create eddp context\n"); + QETH_DBF_MESSAGE(2, "could not create eddp context\n"); goto tx_drop; } } else { @@ -1152,7 +1145,7 @@ static int qeth_osn_send_control_data(struct qeth_card *card, int len, (addr_t) iob, 0, 0); spin_unlock_irqrestore(get_ccwdev_lock(card->write.ccwdev), flags); if (rc) { - PRINT_WARN("qeth_osn_send_control_data: " + QETH_DBF_MESSAGE(2, "qeth_osn_send_control_data: " "ccw_device_start rc = %i\n", rc); QETH_DBF_TEXT_(TRACE, 2, " err%d", rc); qeth_release_buffer(iob->channel, iob); diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index b041ea8..de256e4 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -311,7 +311,6 @@ static struct qeth_ipaddr *qeth_l3_get_addr_buffer( addr = kzalloc(sizeof(struct qeth_ipaddr), GFP_ATOMIC); if (addr == NULL) { - PRINT_WARN("Not enough memory to add address\n"); return NULL; } addr->type = QETH_IP_TYPE_NORMAL; @@ -649,15 +648,6 @@ static void qeth_l3_correct_routing_type(struct qeth_card *card, } } out_inval: - PRINT_WARN("Routing type '%s' not supported for interface %s.\n" - "Router status set to 'no router'.\n", - ((*type == PRIMARY_ROUTER)? "primary router" : - (*type == SECONDARY_ROUTER)? "secondary router" : - (*type == PRIMARY_CONNECTOR)? "primary connector" : - (*type == SECONDARY_CONNECTOR)? "secondary connector" : - (*type == MULTICAST_ROUTER)? "multicast router" : - "unknown"), - card->dev->name); *type = NO_ROUTER; } @@ -674,9 +664,9 @@ int qeth_l3_setrouting_v4(struct qeth_card *card) QETH_PROT_IPV4); if (rc) { card->options.route4.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" + " on %s. Type set to 'no router'.\n", rc, + QETH_CARD_IFNAME(card)); } return rc; } @@ -697,9 +687,9 @@ int qeth_l3_setrouting_v6(struct qeth_card *card) QETH_PROT_IPV6); if (rc) { card->options.route6.type = NO_ROUTER; - PRINT_WARN("Error (0x%04x) while setting routing type on %s. " - "Type set to 'no router'.\n", - rc, QETH_CARD_IFNAME(card)); + QETH_DBF_MESSAGE(2, "Error (0x%04x) while setting routing type" + " on %s. Type set to 'no router'.\n", rc, + QETH_CARD_IFNAME(card)); } #endif return rc; @@ -737,7 +727,6 @@ int qeth_l3_add_ipato_entry(struct qeth_card *card, if (!memcmp(ipatoe->addr, new->addr, (ipatoe->proto == QETH_PROT_IPV4)? 4:16) && (ipatoe->mask_bits == new->mask_bits)) { - PRINT_WARN("ipato entry already exists!\n"); rc = -EEXIST; break; } @@ -802,7 +791,6 @@ int qeth_l3_add_vipa(struct qeth_card *card, enum qeth_prot_versions proto, rc = -EEXIST; spin_unlock_irqrestore(&card->ip_lock, flags); if (rc) { - PRINT_WARN("Cannot add VIPA. Address already exists!\n"); return rc; } if (!qeth_l3_add_ip(card, ipaddr)) @@ -867,7 +855,6 @@ int qeth_l3_add_rxip(struct qeth_card *card, enum qeth_prot_versions proto, rc = -EEXIST; spin_unlock_irqrestore(&card->ip_lock, flags); if (rc) { - PRINT_WARN("Cannot add RXIP. Address already exists!\n"); return rc; } if (!qeth_l3_add_ip(card, ipaddr)) @@ -1020,23 +1007,23 @@ static int qeth_l3_setadapter_hstr(struct qeth_card *card) IPA_SETADP_SET_BROADCAST_MODE, card->options.broadcast_mode); if (rc) - PRINT_WARN("couldn't set broadcast mode on " + QETH_DBF_MESSAGE(2, "couldn't set broadcast mode on " "device %s: x%x\n", CARD_BUS_ID(card), rc); rc = qeth_l3_send_setadp_mode(card, IPA_SETADP_ALTER_MAC_ADDRESS, card->options.macaddr_mode); if (rc) - PRINT_WARN("couldn't set macaddr mode on " + QETH_DBF_MESSAGE(2, "couldn't set macaddr mode on " "device %s: x%x\n", CARD_BUS_ID(card), rc); return rc; } if (card->options.broadcast_mode == QETH_TR_BROADCAST_LOCAL) - PRINT_WARN("set adapter parameters not available " + QETH_DBF_MESSAGE(2, "set adapter parameters not available " "to set broadcast mode, using ALLRINGS " "on device %s:\n", CARD_BUS_ID(card)); if (card->options.macaddr_mode == QETH_TR_MACADDR_CANONICAL) - PRINT_WARN("set adapter parameters not available " + QETH_DBF_MESSAGE(2, "set adapter parameters not available " "to set macaddr mode, using NONCANONICAL " "on device %s:\n", CARD_BUS_ID(card)); return 0; @@ -2182,8 +2169,6 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, @@ -2191,8 +2176,8 @@ static int qeth_l3_arp_set_no_entries(struct qeth_card *card, int no_entries) no_entries); if (rc) { tmp = rc; - PRINT_WARN("Could not set number of ARP entries on %s: " - "%s (0x%x/%d)\n", QETH_CARD_IFNAME(card), + QETH_DBF_MESSAGE(2, "Could not set number of ARP entries on " + "%s: %s (0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; @@ -2260,9 +2245,6 @@ static int qeth_l3_arp_query_cb(struct qeth_card *card, qdata->no_entries * uentry_size){ QETH_DBF_TEXT_(TRACE, 4, "qaer3%i", -ENOMEM); cmd->hdr.return_code = -ENOMEM; - PRINT_WARN("query ARP user space buffer is too small for " - "the returned number of ARP entries. " - "Aborting query!\n"); goto out_error; } QETH_DBF_TEXT_(TRACE, 4, "anore%i", @@ -2324,8 +2306,6 @@ static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) if (!qeth_is_supported(card,/*IPA_QUERY_ARP_ADDR_INFO*/ IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } /* get size of userspace buffer and mask_bits -> 6 bytes */ @@ -2344,7 +2324,7 @@ static int qeth_l3_arp_query(struct qeth_card *card, char __user *udata) qeth_l3_arp_query_cb, (void *)&qinfo); if (rc) { tmp = rc; - PRINT_WARN("Error while querying ARP cache on %s: %s " + QETH_DBF_MESSAGE(2, "Error while querying ARP cache on %s: %s " "(0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); if (copy_to_user(udata, qinfo.udata, 4)) @@ -2375,8 +2355,6 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } @@ -2391,10 +2369,9 @@ static int qeth_l3_arp_add_entry(struct qeth_card *card, if (rc) { tmp = rc; qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not add ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + QETH_DBF_MESSAGE(2, "Could not add ARP entry for address %s " + "on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; } @@ -2417,8 +2394,6 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, if (card->info.guestlan) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } memcpy(buf, entry, 12); @@ -2433,10 +2408,9 @@ static int qeth_l3_arp_remove_entry(struct qeth_card *card, tmp = rc; memset(buf, 0, 16); qeth_l3_ipaddr4_to_string((u8 *)entry->ipaddr, buf); - PRINT_WARN("Could not delete ARP entry for address %s on %s: " - "%s (0x%x/%d)\n", - buf, QETH_CARD_IFNAME(card), - qeth_l3_arp_get_error_cause(&rc), tmp, tmp); + QETH_DBF_MESSAGE(2, "Could not delete ARP entry for address %s" + " on %s: %s (0x%x/%d)\n", buf, QETH_CARD_IFNAME(card), + qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; } @@ -2456,16 +2430,14 @@ static int qeth_l3_arp_flush_cache(struct qeth_card *card) if (card->info.guestlan || (card->info.type == QETH_CARD_TYPE_IQD)) return -EOPNOTSUPP; if (!qeth_is_supported(card, IPA_ARP_PROCESSING)) { - PRINT_WARN("ARP processing not supported " - "on %s!\n", QETH_CARD_IFNAME(card)); return -EOPNOTSUPP; } rc = qeth_l3_send_simple_setassparms(card, IPA_ARP_PROCESSING, IPA_CMD_ASS_ARP_FLUSH_CACHE, 0); if (rc) { tmp = rc; - PRINT_WARN("Could not flush ARP cache on %s: %s (0x%x/%d)\n", - QETH_CARD_IFNAME(card), + QETH_DBF_MESSAGE(2, "Could not flush ARP cache on %s: %s " + "(0x%x/%d)\n", QETH_CARD_IFNAME(card), qeth_l3_arp_get_error_cause(&rc), tmp, tmp); } return rc; @@ -2724,7 +2696,7 @@ static int qeth_l3_hard_start_xmit(struct sk_buff *skb, struct net_device *dev) ctx = qeth_eddp_create_context(card, new_skb, hdr, skb->sk->sk_protocol); if (ctx == NULL) { - PRINT_WARN("could not create eddp context\n"); + QETH_DBF_MESSAGE(2, "could not create eddp context\n"); goto tx_drop; } } else { diff --git a/drivers/s390/net/qeth_l3_sys.c b/drivers/s390/net/qeth_l3_sys.c index 08f51fd..ac19937 100644 --- a/drivers/s390/net/qeth_l3_sys.c +++ b/drivers/s390/net/qeth_l3_sys.c @@ -85,7 +85,6 @@ static ssize_t qeth_l3_dev_route_store(struct qeth_card *card, } else if (!strcmp(tmp, "multicast_router")) { route->type = MULTICAST_ROUTER; } else { - PRINT_WARN("Invalid routing type '%s'.\n", tmp); return -EINVAL; } if (((card->state == CARD_STATE_SOFTSETUP) || @@ -137,9 +136,6 @@ static ssize_t qeth_l3_dev_route6_store(struct device *dev, return -EINVAL; if (!qeth_is_supported(card, IPA_IPV6)) { - PRINT_WARN("IPv6 not supported for interface %s.\n" - "Routing status no changed.\n", - QETH_CARD_IFNAME(card)); return -ENOTSUPP; } @@ -179,7 +175,6 @@ static ssize_t qeth_l3_dev_fake_broadcast_store(struct device *dev, if ((i == 0) || (i == 1)) card->options.fake_broadcast = i; else { - PRINT_WARN("fake_broadcast: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -220,7 +215,6 @@ static ssize_t qeth_l3_dev_broadcast_mode_store(struct device *dev, if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { - PRINT_WARN("Device is not a tokenring device!\n"); return -EINVAL; } @@ -233,8 +227,6 @@ static ssize_t qeth_l3_dev_broadcast_mode_store(struct device *dev, card->options.broadcast_mode = QETH_TR_BROADCAST_ALLRINGS; return count; } else { - PRINT_WARN("broadcast_mode: invalid mode %s!\n", - tmp); return -EINVAL; } return count; @@ -275,7 +267,6 @@ static ssize_t qeth_l3_dev_canonical_macaddr_store(struct device *dev, if (!((card->info.link_type == QETH_LINK_TYPE_HSTR) || (card->info.link_type == QETH_LINK_TYPE_LANE_TR))) { - PRINT_WARN("Device is not a tokenring device!\n"); return -EINVAL; } @@ -285,7 +276,6 @@ static ssize_t qeth_l3_dev_canonical_macaddr_store(struct device *dev, QETH_TR_MACADDR_CANONICAL : QETH_TR_MACADDR_NONCANONICAL; else { - PRINT_WARN("canonical_macaddr: write 0 or 1 to this file!\n"); return -EINVAL; } return count; @@ -327,7 +317,6 @@ static ssize_t qeth_l3_dev_checksum_store(struct device *dev, else if (!strcmp(tmp, "no_checksumming")) card->options.checksum_type = NO_CHECKSUMMING; else { - PRINT_WARN("Unknown checksumming type '%s'\n", tmp); return -EINVAL; } return count; @@ -382,8 +371,6 @@ static ssize_t qeth_l3_dev_ipato_enable_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.enabled = 0; } else { - PRINT_WARN("ipato_enable: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -422,8 +409,6 @@ static ssize_t qeth_l3_dev_ipato_invert4_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.invert4 = 0; } else { - PRINT_WARN("ipato_invert4: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -486,13 +471,10 @@ static int qeth_l3_parse_ipatoe(const char *buf, enum qeth_prot_versions proto, /* get address string */ end = strchr(start, '/'); if (!end || (end - start >= 40)) { - PRINT_WARN("Invalid format for ipato_addx/delx. " - "Use /\n"); return -EINVAL; } strncpy(buffer, start, end - start); if (qeth_l3_string_to_ipaddr(buffer, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } start = end + 1; @@ -500,7 +482,6 @@ static int qeth_l3_parse_ipatoe(const char *buf, enum qeth_prot_versions proto, if (!strlen(start) || (tmp == start) || (*mask_bits > ((proto == QETH_PROT_IPV4) ? 32 : 128))) { - PRINT_WARN("Invalid mask bits for ipato_addx/delx !\n"); return -EINVAL; } return 0; @@ -520,7 +501,6 @@ static ssize_t qeth_l3_dev_ipato_add_store(const char *buf, size_t count, ipatoe = kzalloc(sizeof(struct qeth_ipato_entry), GFP_KERNEL); if (!ipatoe) { - PRINT_WARN("No memory to allocate ipato entry\n"); return -ENOMEM; } ipatoe->proto = proto; @@ -609,8 +589,6 @@ static ssize_t qeth_l3_dev_ipato_invert6_store(struct device *dev, } else if (!strcmp(tmp, "0")) { card->ipato.invert6 = 0; } else { - PRINT_WARN("ipato_invert6: write 0, 1 or 'toggle' to " - "this file\n"); return -EINVAL; } return count; @@ -724,7 +702,6 @@ static int qeth_l3_parse_vipae(const char *buf, enum qeth_prot_versions proto, u8 *addr) { if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } return 0; @@ -891,7 +868,6 @@ static int qeth_l3_parse_rxipe(const char *buf, enum qeth_prot_versions proto, u8 *addr) { if (qeth_l3_string_to_ipaddr(buf, proto, addr)) { - PRINT_WARN("Invalid IP address format!\n"); return -EINVAL; } return 0; -- cgit v0.10.2 From 345aa66e97e61dccafaaa835e4b20d9b241e187f Mon Sep 17 00:00:00 2001 From: Peter Tiedemann Date: Fri, 6 Jun 2008 12:37:47 +0200 Subject: qeth: Prepare-function to call s390dbf was wrong Prepare-function to call s390dbf was wrong handling variable arguments. This worked as macro but not as function any more. Now using va_list processing. Signed-off-by: Peter Tiedemann Signed-off-by: Frank Blaschka Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_core_main.c b/drivers/s390/net/qeth_core_main.c index f428d75..9a71dae 100644 --- a/drivers/s390/net/qeth_core_main.c +++ b/drivers/s390/net/qeth_core_main.c @@ -3983,15 +3983,17 @@ static void qeth_unregister_dbf_views(void) } } -void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *text, ...) +void qeth_dbf_longtext(enum qeth_dbf_names dbf_nix, int level, char *fmt, ...) { char dbf_txt_buf[32]; + va_list args; if (level > (qeth_dbf[dbf_nix].id)->level) return; - snprintf(dbf_txt_buf, sizeof(dbf_txt_buf), text); + va_start(args, fmt); + vsnprintf(dbf_txt_buf, sizeof(dbf_txt_buf), fmt, args); + va_end(args); debug_text_event(qeth_dbf[dbf_nix].id, level, dbf_txt_buf); - } EXPORT_SYMBOL_GPL(qeth_dbf_longtext); -- cgit v0.10.2 From d0ec0f549705b7ecfb787f02512606b08fe5b291 Mon Sep 17 00:00:00 2001 From: Frank Blaschka Date: Fri, 6 Jun 2008 12:37:48 +0200 Subject: qeth: start dev queue after tx drop error In case the xmit function drop out with an error, we have to wake the netdevice queue to start another xmit. Signed-off-by: Frank Blaschka Signed-off-by: Martin Schwidefsky Signed-off-by: Jeff Garzik diff --git a/drivers/s390/net/qeth_l2_main.c b/drivers/s390/net/qeth_l2_main.c index dd7659c..f682f7b 100644 --- a/drivers/s390/net/qeth_l2_main.c +++ b/drivers/s390/net/qeth_l2_main.c @@ -721,6 +721,7 @@ tx_drop: if ((new_skb != skb) && new_skb) dev_kfree_skb_any(new_skb); dev_kfree_skb_any(skb); + netif_wake_queue(dev); return NETDEV_TX_OK; } diff --git a/drivers/s390/net/qeth_l3_main.c b/drivers/s390/net/qeth_l3_main.c index de256e4..999552c 100644 --- a/drivers/s390/net/qeth_l3_main.c +++ b/drivers/s390/net/qeth_l3_main.c @@ -2764,6 +2764,7 @@ tx_drop: if ((new_skb != skb) && new_skb) dev_kfree_skb_any(new_skb); dev_kfree_skb_any(skb); + netif_wake_queue(dev); return NETDEV_TX_OK; } -- cgit v0.10.2 From ae6b4d9ab6129467415801f30e487bc141a3f471 Mon Sep 17 00:00:00 2001 From: Jay Cliburn Date: Sun, 1 Jun 2008 16:57:11 -0500 Subject: atl1: fix suspend regression Using vendor magic to force the PHY into power save mode breaks suspend. It isn't needed anyway, so remove it. Tested-by: Avuton Olrich Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 6ddc911..99e0b4c 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -637,22 +637,6 @@ static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw) } /* - * Force the PHY into power saving mode using vendor magic. - */ -#ifdef CONFIG_PM -static void atl1_phy_enter_power_saving(struct atl1_hw *hw) -{ - atl1_write_phy_reg(hw, MII_DBG_ADDR, 0); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0x124E); - atl1_write_phy_reg(hw, MII_DBG_ADDR, 2); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0x3000); - atl1_write_phy_reg(hw, MII_DBG_ADDR, 3); - atl1_write_phy_reg(hw, MII_DBG_DATA, 0); - -} -#endif - -/* * Resets the PHY and make all config validate * hw - Struct containing variables accessed by shared code * @@ -2860,7 +2844,6 @@ disable_wol: ctrl |= PCIE_PHYMISC_FORCE_RCV_DET; iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC); ioread32(hw->hw_addr + REG_PCIE_PHYMISC); - atl1_phy_enter_power_saving(hw); hw->phy_configured = false; pci_enable_wake(pdev, pci_choose_state(pdev, state), 0); exit: -- cgit v0.10.2 From 69de8d23d10694bdd63fe715b98e1a61c56ed288 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 2 Jun 2008 10:59:02 +0100 Subject: s2io iomem annotations Signed-off-by: Al Viro Signed-off-by: Jeff Garzik diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index a20693e..b5c1e66 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2861,7 +2861,8 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) struct config_param *config; struct mac_info *mac_control; int pkts_processed = 0; - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; struct s2io_nic *nic = dev->priv; struct XENA_dev_config __iomem *bar0 = nic->bar0; int budget_org = budget; @@ -2878,7 +2879,7 @@ static int s2io_poll_msix(struct napi_struct *napi, int budget) if (pkts_processed < budget_org) { netif_rx_complete(dev, napi); /*Re Enable MSI-Rx Vector*/ - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += 7 - ring->ring_no; val8 = (ring->ring_no == 0) ? 0x3f : 0xbf; writeb(val8, addr); @@ -4364,9 +4365,10 @@ static irqreturn_t s2io_msix_ring_handle(int irq, void *dev_id) return IRQ_HANDLED; if (sp->config.napi) { - u8 *addr = NULL, val8 = 0; + u8 __iomem *addr = NULL; + u8 val8 = 0; - addr = (u8 *)&bar0->xmsi_mask_reg; + addr = (u8 __iomem *)&bar0->xmsi_mask_reg; addr += (7 - ring->ring_no); val8 = (ring->ring_no == 0) ? 0x7f : 0xff; writeb(val8, addr); -- cgit v0.10.2 From 68c2889834602f6efed195f44439ef5d526683a8 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Sat, 31 May 2008 16:52:52 +0100 Subject: sky2: Hold RTNL while calling dev_close() dev_close() must be called holding the RTNL. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 3bb6053..62436b3 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -4404,7 +4404,9 @@ static int sky2_resume(struct pci_dev *pdev) if (err) { printk(KERN_ERR PFX "%s: could not up: %d\n", dev->name, err); + rtnl_lock(); dev_close(dev); + rtnl_unlock(); goto out; } } -- cgit v0.10.2 From 709772e6e06564ed94ba740de70185ac3d792773 Mon Sep 17 00:00:00 2001 From: Krzysztof Piotr Oledzki Date: Tue, 10 Jun 2008 15:44:49 -0700 Subject: net: Fix routing tables with id > 255 for legacy software Most legacy software do not like tables > 255 as rtm_table is u8 so tb_id is sent &0xff and it is possible to mismatch for example table 510 with table 254 (main). This patch introduces RT_TABLE_COMPAT=252 so the code uses it if tb_id > 255. It makes such old applications happy, new ones are still able to use RTA_TABLE to get a proper table id. Signed-off-by: Krzysztof Piotr Oledzki Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/linux/rtnetlink.h b/include/linux/rtnetlink.h index a2aec2c..b358c70 100644 --- a/include/linux/rtnetlink.h +++ b/include/linux/rtnetlink.h @@ -246,6 +246,7 @@ enum rt_class_t { RT_TABLE_UNSPEC=0, /* User defined values */ + RT_TABLE_COMPAT=252, RT_TABLE_DEFAULT=253, RT_TABLE_MAIN=254, RT_TABLE_LOCAL=255, diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 3b83c34..0d4d728 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -960,7 +960,10 @@ int fib_dump_info(struct sk_buff *skb, u32 pid, u32 seq, int event, rtm->rtm_dst_len = dst_len; rtm->rtm_src_len = 0; rtm->rtm_tos = tos; - rtm->rtm_table = tb_id; + if (tb_id < 256) + rtm->rtm_table = tb_id; + else + rtm->rtm_table = RT_TABLE_COMPAT; NLA_PUT_U32(skb, RTA_TABLE, tb_id); rtm->rtm_type = type; rtm->rtm_flags = fi->fib_flags; -- cgit v0.10.2 From 3294f202dc1acd82223e83ef59f272bd87bb06b2 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:09 +0100 Subject: dccp ccid-3: Bug-Fix - Zero RTT is possible In commit $(825de27d9e40b3117b29a79d412b7a4b78c5d815) (from 27th May, commit message `dccp ccid-3: Fix "t_ipi explosion" bug'), the CCID-3 window counter computation was fixed to cope with RTTs < 4 microseconds. Such RTTs can be found e.g. when running CCID-3 over loopback. The fix removed a check against RTT < 4, but introduced a divide-by-zero bug. All steady-state RTTs in DCCP are filtered using dccp_sample_rtt(), which ensures non-zero samples. However, a zero RTT is possible on initialisation, when there is no RTT sample from the Request/Response exchange. The fix is to use the fallback-RTT from RFC 4340, 3.4. This is also better than just fixing update_win_count() since it allows other parts of the code to always assume that the RTT is non-zero during the time that the CCID is used. Signed-off-by: Gerrit Renker diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index f813077..0474f4c 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -329,8 +329,14 @@ static int ccid3_hc_tx_send_packet(struct sock *sk, struct sk_buff *skb) hctx->ccid3hctx_x = rfc3390_initial_rate(sk); hctx->ccid3hctx_t_ld = now; } else { - /* Sender does not have RTT sample: X_pps = 1 pkt/sec */ - hctx->ccid3hctx_x = hctx->ccid3hctx_s; + /* + * Sender does not have RTT sample: + * - set fallback RTT (RFC 4340, 3.4) since a RTT value + * is needed in several parts (e.g. window counter); + * - set sending rate X_pps = 1pps as per RFC 3448, 4.2. + */ + hctx->ccid3hctx_rtt = DCCP_FALLBACK_RTT; + hctx->ccid3hctx_x = hctx->ccid3hctx_s; hctx->ccid3hctx_x <<= 6; } ccid3_update_send_interval(hctx); -- cgit v0.10.2 From 1e2f0e5e8376f2a0ada8760fc9d3104e1a81382b Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:09 +0100 Subject: dccp: Fix sparse warnings This patch fixes the following sparse warnings: * nested min(max()) expression: net/dccp/ccids/ccid3.c:91:21: warning: symbol '__x' shadows an earlier one net/dccp/ccids/ccid3.c:91:21: warning: symbol '__y' shadows an earlier one * Declaration of function prototypes in .c instead of .h file, resulting in "should it be static?" warnings. * Declared "struct dccpw" static (local to dccp_probe). * Disabled dccp_delayed_ack() - not fully removed due to RFC 4340, 11.3 ("Receivers SHOULD implement delayed acknowledgement timers ..."). * Used a different local variable name to avoid net/dccp/ackvec.c:293:13: warning: symbol 'state' shadows an earlier one net/dccp/ackvec.c:238:33: originally declared here * Removed unused functions `dccp_ackvector_print' and `dccp_ackvec_print'. Signed-off-by: Gerrit Renker diff --git a/net/dccp/ackvec.c b/net/dccp/ackvec.c index 6de4bd1..1e8be24 100644 --- a/net/dccp/ackvec.c +++ b/net/dccp/ackvec.c @@ -290,12 +290,12 @@ int dccp_ackvec_add(struct dccp_ackvec *av, const struct sock *sk, while (1) { const u8 len = dccp_ackvec_len(av, index); - const u8 state = dccp_ackvec_state(av, index); + const u8 av_state = dccp_ackvec_state(av, index); /* * valid packets not yet in av_buf have a reserved * entry, with a len equal to 0. */ - if (state == DCCP_ACKVEC_STATE_NOT_RECEIVED && + if (av_state == DCCP_ACKVEC_STATE_NOT_RECEIVED && len == 0 && delta == 0) { /* Found our reserved seat! */ dccp_pr_debug("Found %llu reserved seat!\n", @@ -325,31 +325,6 @@ out_duplicate: return -EILSEQ; } -#ifdef CONFIG_IP_DCCP_DEBUG -void dccp_ackvector_print(const u64 ackno, const unsigned char *vector, int len) -{ - dccp_pr_debug_cat("ACK vector len=%d, ackno=%llu |", len, - (unsigned long long)ackno); - - while (len--) { - const u8 state = (*vector & DCCP_ACKVEC_STATE_MASK) >> 6; - const u8 rl = *vector & DCCP_ACKVEC_LEN_MASK; - - dccp_pr_debug_cat("%d,%d|", state, rl); - ++vector; - } - - dccp_pr_debug_cat("\n"); -} - -void dccp_ackvec_print(const struct dccp_ackvec *av) -{ - dccp_ackvector_print(av->av_buf_ackno, - av->av_buf + av->av_buf_head, - av->av_vec_len); -} -#endif - static void dccp_ackvec_throw_record(struct dccp_ackvec *av, struct dccp_ackvec_record *avr) { diff --git a/net/dccp/ccids/ccid3.c b/net/dccp/ccids/ccid3.c index 0474f4c..a1929f3 100644 --- a/net/dccp/ccids/ccid3.c +++ b/net/dccp/ccids/ccid3.c @@ -159,8 +159,8 @@ static void ccid3_hc_tx_update_x(struct sock *sk, ktime_t *stamp) } else if (ktime_us_delta(now, hctx->ccid3hctx_t_ld) - (s64)hctx->ccid3hctx_rtt >= 0) { - hctx->ccid3hctx_x = - max(min(2 * hctx->ccid3hctx_x, min_rate), + hctx->ccid3hctx_x = min(2 * hctx->ccid3hctx_x, min_rate); + hctx->ccid3hctx_x = max(hctx->ccid3hctx_x, scaled_div(((__u64)hctx->ccid3hctx_s) << 6, hctx->ccid3hctx_rtt)); hctx->ccid3hctx_t_ld = now; diff --git a/net/dccp/ccids/lib/tfrc.c b/net/dccp/ccids/lib/tfrc.c index d1dfbb8..97ecec0 100644 --- a/net/dccp/ccids/lib/tfrc.c +++ b/net/dccp/ccids/lib/tfrc.c @@ -14,14 +14,6 @@ module_param(tfrc_debug, bool, 0444); MODULE_PARM_DESC(tfrc_debug, "Enable debug messages"); #endif -extern int tfrc_tx_packet_history_init(void); -extern void tfrc_tx_packet_history_exit(void); -extern int tfrc_rx_packet_history_init(void); -extern void tfrc_rx_packet_history_exit(void); - -extern int tfrc_li_init(void); -extern void tfrc_li_exit(void); - static int __init tfrc_module_init(void) { int rc = tfrc_li_init(); diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h index 1fb1187..ddd8107 100644 --- a/net/dccp/ccids/lib/tfrc.h +++ b/net/dccp/ccids/lib/tfrc.h @@ -58,7 +58,14 @@ static inline u32 tfrc_ewma(const u32 avg, const u32 newval, const u8 weight) return avg ? (weight * avg + (10 - weight) * newval) / 10 : newval; } -extern u32 tfrc_calc_x(u16 s, u32 R, u32 p); -extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue); +extern u32 tfrc_calc_x(u16 s, u32 R, u32 p); +extern u32 tfrc_calc_x_reverse_lookup(u32 fvalue); +extern int tfrc_tx_packet_history_init(void); +extern void tfrc_tx_packet_history_exit(void); +extern int tfrc_rx_packet_history_init(void); +extern void tfrc_rx_packet_history_exit(void); + +extern int tfrc_li_init(void); +extern void tfrc_li_exit(void); #endif /* _TFRC_H_ */ diff --git a/net/dccp/output.c b/net/dccp/output.c index 1f8a9b6..fe20068 100644 --- a/net/dccp/output.c +++ b/net/dccp/output.c @@ -508,6 +508,7 @@ void dccp_send_ack(struct sock *sk) EXPORT_SYMBOL_GPL(dccp_send_ack); +#if 0 /* FIXME: Is this still necessary (11.3) - currently nowhere used by DCCP. */ void dccp_send_delayed_ack(struct sock *sk) { @@ -538,6 +539,7 @@ void dccp_send_delayed_ack(struct sock *sk) icsk->icsk_ack.timeout = timeout; sk_reset_timer(sk, &icsk->icsk_delack_timer, timeout); } +#endif void dccp_send_sync(struct sock *sk, const u64 ackno, const enum dccp_pkt_type pkt_type) diff --git a/net/dccp/probe.c b/net/dccp/probe.c index 0bcdc92..81368a7 100644 --- a/net/dccp/probe.c +++ b/net/dccp/probe.c @@ -42,7 +42,7 @@ static int bufsize = 64 * 1024; static const char procname[] = "dccpprobe"; -struct { +static struct { struct kfifo *fifo; spinlock_t lock; wait_queue_head_t wait; -- cgit v0.10.2 From 65907a433ac0ca450c4408080f24c6e4743386b2 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:09 +0100 Subject: dccp ccid-2: Bug-Fix - Ack Vectors need to be ignored on request sockets This fixes an oversight from an earlier patch, ensuring that Ack Vectors are not processed on request sockets. The issue is that Ack Vectors must not be parsed on request sockets, since the Ack Vector feature depends on the selection of the (TX) CCID. During the initial handshake the CCIDs are undefined, and so RFC 4340, 10.3 applies: "Using CCID-specific options and feature options during a negotiation for the corresponding CCID feature is NOT RECOMMENDED [...]" And it is not even possible: when the server receives the Request from the client, the CCID and Ack vector features are undefined; when the Ack finalising the 3-way hanshake arrives, the request socket has not been cloned yet into a full socket. (This order is necessary, since otherwise the newly created socket would have to be destroyed whenever an option error occurred - a malicious hacker could simply send garbage options and exploit this.) Signed-off-by: Gerrit Renker diff --git a/net/dccp/options.c b/net/dccp/options.c index d2a84a2..43bc24e 100644 --- a/net/dccp/options.c +++ b/net/dccp/options.c @@ -107,9 +107,11 @@ int dccp_parse_options(struct sock *sk, struct dccp_request_sock *dreq, * * CCID-specific options are ignored during connection setup, as * negotiation may still be in progress (see RFC 4340, 10.3). + * The same applies to Ack Vectors, as these depend on the CCID. * */ - if (dreq != NULL && opt >= 128) + if (dreq != NULL && (opt >= 128 || + opt == DCCPO_ACK_VECTOR_0 || opt == DCCPO_ACK_VECTOR_1)) goto ignore_option; switch (opt) { -- cgit v0.10.2 From 1e8a287c79f64226541f5c44aa52d4698bb84cf5 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:10 +0100 Subject: dccp ccid-3: TFRC reverse-lookup Bug-Fix This fixes a bug in the reverse lookup of p: given a value f(p), instead of p, the function returned the smallest tabulated value f(p). The smallest tabulated value of 10^6 * f(p) = sqrt(2*p/3) + 12 * sqrt(3*p/8) * (32 * p^3 + p) for p=0.0001 is 8172. Since this value is scaled by 10^6, the outcome of this bug is that a loss of 8172/10^6 = 0.8172% was reported whenever the input was below the table resolution of 0.01%. This means that the value was over 80 times too high, resulting in large spikes of the initial loss interval, thus unnecessarily reducing the throughput. Also corrected the printk format (%u for u32). Signed-off-by: Gerrit Renker diff --git a/net/dccp/ccids/lib/tfrc_equation.c b/net/dccp/ccids/lib/tfrc_equation.c index e4e64b7..2f20a29 100644 --- a/net/dccp/ccids/lib/tfrc_equation.c +++ b/net/dccp/ccids/lib/tfrc_equation.c @@ -661,7 +661,7 @@ u32 tfrc_calc_x(u16 s, u32 R, u32 p) EXPORT_SYMBOL_GPL(tfrc_calc_x); -/* +/** * tfrc_calc_x_reverse_lookup - try to find p given f(p) * * @fvalue: function value to match, scaled by 1000000 @@ -676,11 +676,11 @@ u32 tfrc_calc_x_reverse_lookup(u32 fvalue) /* Error cases. */ if (fvalue < tfrc_calc_x_lookup[0][1]) { - DCCP_WARN("fvalue %d smaller than resolution\n", fvalue); - return tfrc_calc_x_lookup[0][1]; + DCCP_WARN("fvalue %u smaller than resolution\n", fvalue); + return TFRC_SMALLEST_P; } if (fvalue > tfrc_calc_x_lookup[TFRC_CALC_X_ARRSIZE - 1][0]) { - DCCP_WARN("fvalue %d exceeds bounds!\n", fvalue); + DCCP_WARN("fvalue %u exceeds bounds!\n", fvalue); return 1000000; } -- cgit v0.10.2 From 7deb0f851003287d7e259bf6b33548b144c0f2d5 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:10 +0100 Subject: dccp ccid-3: X truncated due to type conversion This fixes a bug in computing the inter-packet-interval t_ipi = s/X: scaled_div32(a, b) uses u32 for b, but in "scaled_div32(s, X)" the type of the sending rate `X' is u64. Since X is scaled by 2^6, this truncates rates greater than 2^26 Bps (~537 Mbps). Using full 64-bit division now. Signed-off-by: Gerrit Renker diff --git a/net/dccp/ccids/lib/tfrc.h b/net/dccp/ccids/lib/tfrc.h index ddd8107..ed98575 100644 --- a/net/dccp/ccids/lib/tfrc.h +++ b/net/dccp/ccids/lib/tfrc.h @@ -15,7 +15,7 @@ * (at your option) any later version. */ #include -#include +#include #include "../../dccp.h" /* internal includes that this module exports: */ #include "loss_interval.h" @@ -29,21 +29,19 @@ extern int tfrc_debug; #endif /* integer-arithmetic divisions of type (a * 1000000)/b */ -static inline u64 scaled_div(u64 a, u32 b) +static inline u64 scaled_div(u64 a, u64 b) { BUG_ON(b==0); - a *= 1000000; - do_div(a, b); - return a; + return div64_u64(a * 1000000, b); } -static inline u32 scaled_div32(u64 a, u32 b) +static inline u32 scaled_div32(u64 a, u64 b) { u64 result = scaled_div(a, b); if (result > UINT_MAX) { - DCCP_CRIT("Overflow: a(%llu)/b(%u) > ~0U", - (unsigned long long)a, b); + DCCP_CRIT("Overflow: %llu/%llu > UINT_MAX", + (unsigned long long)a, (unsigned long long)b); return UINT_MAX; } return result; -- cgit v0.10.2 From be4c798a41bf626cdaacf96c382f116ed2f7dbe9 Mon Sep 17 00:00:00 2001 From: Gerrit Renker Date: Wed, 11 Jun 2008 11:19:10 +0100 Subject: dccp: Bug in initial acknowledgment number assignment Step 8.5 in RFC 4340 says for the newly cloned socket Initialize S.GAR := S.ISS, but what in fact the code (minisocks.c) does is Initialize S.GAR := S.ISR, which is wrong (typo?) -- fixed by the patch. Signed-off-by: Gerrit Renker diff --git a/net/dccp/minisocks.c b/net/dccp/minisocks.c index 33ad483..66dca5b 100644 --- a/net/dccp/minisocks.c +++ b/net/dccp/minisocks.c @@ -165,12 +165,12 @@ out_free: /* See dccp_v4_conn_request */ newdmsk->dccpms_sequence_window = req->rcv_wnd; - newdp->dccps_gar = newdp->dccps_isr = dreq->dreq_isr; - dccp_update_gsr(newsk, dreq->dreq_isr); - - newdp->dccps_iss = dreq->dreq_iss; + newdp->dccps_gar = newdp->dccps_iss = dreq->dreq_iss; dccp_update_gss(newsk, dreq->dreq_iss); + newdp->dccps_isr = dreq->dreq_isr; + dccp_update_gsr(newsk, dreq->dreq_isr); + /* * SWL and AWL are initially adjusted so that they are not less than * the initial Sequence Numbers received and sent, respectively: -- cgit v0.10.2 From 8d6bcd6e219f183aba4fb62bb7065a4db772ac49 Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Sat, 24 May 2008 16:11:51 +1000 Subject: [POWERPC] bootwrapper: add simpleImage* to list of boot targets Without simpleImage% in the BOOT_TARGETS list, it is impossible to build any of the simpleImages. Signed-off-by: Grant Likely Signed-off-by: Josh Boyer diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 9dcdc03..86096cc 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -154,7 +154,7 @@ all: zImage CPPFLAGS_vmlinux.lds := -Upowerpc -BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% +BOOT_TARGETS = zImage zImage.initrd uImage zImage% dtbImage% treeImage.% cuImage.% simpleImage.% PHONY += $(BOOT_TARGETS) -- cgit v0.10.2 From 7427d8b815c7fc0b005a17cf3952b7ebef0481d2 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 11 Jun 2008 12:08:39 +0800 Subject: smc91x: fix build error from the SMC_GET_MAC_ADDR API change Cc: Jeff Garzik Cc: Andrew Morton Signed-off-by: Bryan Wu Signed-off-by: Linus Torvalds diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h index 69e97a1..8606818 100644 --- a/drivers/net/smc91x.h +++ b/drivers/net/smc91x.h @@ -93,14 +93,14 @@ #define SMC_insw(a, r, p, l) insw ((unsigned long *)((a) + (r)), p, l) # endif /* check if the mac in reg is valid */ -#define SMC_GET_MAC_ADDR(addr) \ +#define SMC_GET_MAC_ADDR(lp, addr) \ do { \ unsigned int __v; \ - __v = SMC_inw(ioaddr, ADDR0_REG); \ + __v = SMC_inw(ioaddr, ADDR0_REG(lp)); \ addr[0] = __v; addr[1] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR1_REG); \ + __v = SMC_inw(ioaddr, ADDR1_REG(lp)); \ addr[2] = __v; addr[3] = __v >> 8; \ - __v = SMC_inw(ioaddr, ADDR2_REG); \ + __v = SMC_inw(ioaddr, ADDR2_REG(lp)); \ addr[4] = __v; addr[5] = __v >> 8; \ if (*(u32 *)(&addr[0]) == 0xFFFFFFFF) { \ random_ether_addr(addr); \ -- cgit v0.10.2 From 83014699b06fb9a300d896c7c49fb8be1c6c5ddc Mon Sep 17 00:00:00 2001 From: stephane eranian Date: Wed, 11 Jun 2008 15:24:13 -0700 Subject: [IA64] perfmon: fix async exit bug Move the cleanup of the async queue to the close callback from the flush callback. This avoids losing asynchronous overflow notifications when the file descriptor is shared by multiple processes and one terminates. Signed-off-by: Stephane Eranian Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/perfmon.c b/arch/ia64/kernel/perfmon.c index 71d0513..7714a97 100644 --- a/arch/ia64/kernel/perfmon.c +++ b/arch/ia64/kernel/perfmon.c @@ -1864,11 +1864,6 @@ pfm_flush(struct file *filp, fl_owner_t id) * invoked after, it will find an empty queue and no * signal will be sent. In both case, we are safe */ - if (filp->f_flags & FASYNC) { - DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue)); - pfm_do_fasync (-1, filp, ctx, 0); - } - PROTECT_CTX(ctx, flags); state = ctx->ctx_state; @@ -1999,6 +1994,11 @@ pfm_close(struct inode *inode, struct file *filp) return -EBADF; } + if (filp->f_flags & FASYNC) { + DPRINT(("cleaning up async_queue=%p\n", ctx->ctx_async_queue)); + pfm_do_fasync(-1, filp, ctx, 0); + } + PROTECT_CTX(ctx, flags); state = ctx->ctx_state; -- cgit v0.10.2 From a4aff2233786640c10b178ad78d4dd7e375f1955 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Thu, 5 Jun 2008 10:43:14 +0100 Subject: [ARM] 5077/1: spi: fix list scan success verification in PXA ssp driver The list search success check in arch/arm/mach-pxa/ssp.c is wrong: for example, it didn't recognise failure for me when I requested port 0. Signed-off-by: Guennadi Liakhovetski Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/arch/arm/mach-pxa/ssp.c b/arch/arm/mach-pxa/ssp.c index 00af7f2..0bb3198 100644 --- a/arch/arm/mach-pxa/ssp.c +++ b/arch/arm/mach-pxa/ssp.c @@ -330,7 +330,7 @@ struct ssp_device *ssp_request(int port, const char *label) mutex_unlock(&ssp_lock); - if (ssp->port_id != port) + if (&ssp->node == &ssp_list) return NULL; return ssp; -- cgit v0.10.2 From 62cfcf4f467733a8dc218691c791804a148da887 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?J=C3=BCrgen=20Schindele?= Date: Wed, 11 Jun 2008 19:56:06 +0100 Subject: [ARM] 5090/1: Correct pxafb palette typo error This patch correct a typo error in pxafb vhich is relevant for 8-bit palette framebuffer configuration. Signed-off-by: Jrgen Schindele Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 274bc93..7dcda18 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -573,8 +573,8 @@ static int setup_frame_dma(struct pxafb_info *fbi, int dma, int pal, dma_desc->fdadr = fbi->dma_buff_phys + dma_desc_off; fbi->fdadr[dma] = fbi->dma_buff_phys + dma_desc_off; } else { - pal_desc = &fbi->dma_buff->pal_desc[dma]; - pal_desc_off = offsetof(struct pxafb_dma_buff, dma_desc[pal]); + pal_desc = &fbi->dma_buff->pal_desc[pal]; + pal_desc_off = offsetof(struct pxafb_dma_buff, pal_desc[pal]); pal_desc->fsadr = fbi->dma_buff_phys + pal * PALETTE_SIZE; pal_desc->fidr = 0; @@ -1276,6 +1276,8 @@ static int __init pxafb_map_video_memory(struct pxafb_info *fbi) fbi->dma_buff_phys = fbi->map_dma; fbi->palette_cpu = (u16 *) fbi->dma_buff->palette; + pr_debug("pxafb: palette_mem_size = 0x%08lx\n", fbi->palette_size*sizeof(u16)); + #ifdef CONFIG_FB_PXA_SMARTPANEL fbi->smart_cmds = (uint16_t *) fbi->dma_buff->cmd_buff; fbi->n_smart_cmds = 0; -- cgit v0.10.2 From e1094bfa26e5e94af2fea79e004614dbce42b008 Mon Sep 17 00:00:00 2001 From: Zhao Yakui Date: Wed, 14 May 2008 11:32:59 +0800 Subject: ACPI: Disable Fixed_RTC event when installing RTC handler The Fixed_RTC event should be disabled when installing RTC handler. Only when RTC alarm is set will it be enabled again. If it is not disabled, maybe some machines will be powered on automatically after the system is shutdown even when the RTC alarm is not set. http://bugzilla.kernel.org/show_bug.cgi?id=10010 Signed-off-by: Zhao Yakui Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 06f8634..2808dc6 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -272,6 +272,12 @@ static u32 rtc_handler(void *context) static inline void rtc_wake_setup(void) { acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); + /* + * After the RTC handler is installed, the Fixed_RTC event should + * be disabled. Only when the RTC alarm is set will it be enabled. + */ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); } static void rtc_wake_on(struct device *dev) diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 8a5fe87..224c57c 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -495,6 +495,12 @@ static int __init acpi_sleep_proc_init(void) acpi_root_dir, &acpi_system_alarm_fops); acpi_install_fixed_event_handler(ACPI_EVENT_RTC, rtc_handler, NULL); + /* + * Disable the RTC event after installing RTC handler. + * Only when RTC alarm is set will it be enabled. + */ + acpi_clear_event(ACPI_EVENT_RTC); + acpi_disable_event(ACPI_EVENT_RTC, 0); #endif /* HAVE_ACPI_LEGACY_ALARM */ /* 'wakeup device' [R/W] */ -- cgit v0.10.2 From dcb84f335bee9c9a7781cfc5d74492dccaf066d2 Mon Sep 17 00:00:00 2001 From: Venkatesh Pallipadi Date: Mon, 19 May 2008 19:09:27 -0400 Subject: cpuidle acpi driver: fix oops on AC<->DC cpuidle and acpi driver interaction bug with the way cpuidle_register_driver() is called. Due to this bug, there will be oops on AC<->DC on some systems, where they support C-states in one DC and not in AC. The current code does ON BOOT: Look at CST and other C-state info to see whether more than C1 is supported. If it is, then acpi processor_idle does a cpuidle_register_driver() call, which internally enables the device. ON CST change notification (AC<->DC) and on suspend-resume: acpi driver temporarily disables device, updates the device with any new C-states, and reenables the device. The problem is is on boot, there are no C2, C3 states supported and we skip the register. Later on AC<->DC, we may get a CST notification and we try to reevaluate CST and enabled the device, without actually registering it. This causes breakage as we try to create /sys fs sub directory, without the parent directory which is created at register time. Thanks to Sanjeev for reporting the problem here. http://bugzilla.kernel.org/show_bug.cgi?id=10394 Signed-off-by: Venkatesh Pallipadi Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 2dd2c1f..556ee15 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -1669,6 +1669,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) return -EINVAL; } + dev->cpu = pr->id; for (i = 0; i < CPUIDLE_STATE_MAX; i++) { dev->states[i].name[0] = '\0'; dev->states[i].desc[0] = '\0'; @@ -1738,7 +1739,7 @@ static int acpi_processor_setup_cpuidle(struct acpi_processor *pr) int acpi_processor_cst_has_changed(struct acpi_processor *pr) { - int ret; + int ret = 0; if (boot_option_idle_override) return 0; @@ -1756,8 +1757,10 @@ int acpi_processor_cst_has_changed(struct acpi_processor *pr) cpuidle_pause_and_lock(); cpuidle_disable_device(&pr->power.dev); acpi_processor_get_power_info(pr); - acpi_processor_setup_cpuidle(pr); - ret = cpuidle_enable_device(&pr->power.dev); + if (pr->flags.power) { + acpi_processor_setup_cpuidle(pr); + ret = cpuidle_enable_device(&pr->power.dev); + } cpuidle_resume_and_unlock(); return ret; @@ -1813,7 +1816,6 @@ int __cpuinit acpi_processor_power_init(struct acpi_processor *pr, if (pr->flags.power) { #ifdef CONFIG_CPU_IDLE acpi_processor_setup_cpuidle(pr); - pr->power.dev.cpu = pr->id; if (cpuidle_register_device(&pr->power.dev)) return -EIO; #endif @@ -1850,8 +1852,7 @@ int acpi_processor_power_exit(struct acpi_processor *pr, return 0; #ifdef CONFIG_CPU_IDLE - if (pr->flags.power) - cpuidle_unregister_device(&pr->power.dev); + cpuidle_unregister_device(&pr->power.dev); #endif pr->flags.power_setup_done = 0; diff --git a/drivers/cpuidle/cpuidle.c b/drivers/cpuidle/cpuidle.c index fc555a9..23554b6 100644 --- a/drivers/cpuidle/cpuidle.c +++ b/drivers/cpuidle/cpuidle.c @@ -38,6 +38,8 @@ static void cpuidle_kick_cpus(void) static void cpuidle_kick_cpus(void) {} #endif +static int __cpuidle_register_device(struct cpuidle_device *dev); + /** * cpuidle_idle_call - the main idle loop * @@ -138,6 +140,12 @@ int cpuidle_enable_device(struct cpuidle_device *dev) if (!dev->state_count) return -EINVAL; + if (dev->registered == 0) { + ret = __cpuidle_register_device(dev); + if (ret) + return ret; + } + if ((ret = cpuidle_add_state_sysfs(dev))) return ret; @@ -232,10 +240,13 @@ static void poll_idle_init(struct cpuidle_device *dev) {} #endif /* CONFIG_ARCH_HAS_CPU_RELAX */ /** - * cpuidle_register_device - registers a CPU's idle PM feature + * __cpuidle_register_device - internal register function called before register + * and enable routines * @dev: the cpu + * + * cpuidle_lock mutex must be held before this is called */ -int cpuidle_register_device(struct cpuidle_device *dev) +static int __cpuidle_register_device(struct cpuidle_device *dev) { int ret; struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); @@ -247,18 +258,34 @@ int cpuidle_register_device(struct cpuidle_device *dev) init_completion(&dev->kobj_unregister); - mutex_lock(&cpuidle_lock); - poll_idle_init(dev); per_cpu(cpuidle_devices, dev->cpu) = dev; list_add(&dev->device_list, &cpuidle_detected_devices); if ((ret = cpuidle_add_sysfs(sys_dev))) { - mutex_unlock(&cpuidle_lock); module_put(cpuidle_curr_driver->owner); return ret; } + dev->registered = 1; + return 0; +} + +/** + * cpuidle_register_device - registers a CPU's idle PM feature + * @dev: the cpu + */ +int cpuidle_register_device(struct cpuidle_device *dev) +{ + int ret; + + mutex_lock(&cpuidle_lock); + + if ((ret = __cpuidle_register_device(dev))) { + mutex_unlock(&cpuidle_lock); + return ret; + } + cpuidle_enable_device(dev); cpuidle_install_idle_handler(); @@ -278,6 +305,9 @@ void cpuidle_unregister_device(struct cpuidle_device *dev) { struct sys_device *sys_dev = get_cpu_sysdev((unsigned long)dev->cpu); + if (dev->registered == 0) + return; + cpuidle_pause_and_lock(); cpuidle_disable_device(dev); diff --git a/include/linux/cpuidle.h b/include/linux/cpuidle.h index 51e6b1e..dcf77fa 100644 --- a/include/linux/cpuidle.h +++ b/include/linux/cpuidle.h @@ -82,6 +82,7 @@ struct cpuidle_state_kobj { }; struct cpuidle_device { + unsigned int registered:1; unsigned int enabled:1; unsigned int cpu; -- cgit v0.10.2 From 197a2cd907e3a5278a1cfd48c86402133f38a9ba Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:09 -0300 Subject: thinkpad-acpi: SW_RADIO to SW_RFKILL_ALL rename Rename SW_RADIO to SW_RFKILL_ALL in thinkpad-acpi code and docs, following 5adad0133907790c50283bf03271d920d6897043 "Input: rename SW_RADIO to SW_RFKILL_ALL". Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 01c6c3d..64b3f14 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -503,7 +503,7 @@ generate input device EV_KEY events. In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW events for switches: -SW_RADIO T60 and later hardare rfkill rocker switch +SW_RFKILL_ALL T60 and later hardare rfkill rocker switch SW_TABLET_MODE Tablet ThinkPads HKEY events 0x5009 and 0x500A Non hot-key ACPI HKEY event map: diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index a0ce0b2..f81e048 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1293,7 +1293,7 @@ static void tpacpi_input_send_radiosw(void) mutex_lock(&tpacpi_inputdev_send_mutex); input_report_switch(tpacpi_inputdev, - SW_RADIO, !!wlsw); + SW_RFKILL_ALL, !!wlsw); input_sync(tpacpi_inputdev); mutex_unlock(&tpacpi_inputdev_send_mutex); @@ -2199,7 +2199,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) if (tp_features.hotkey_wlsw) { set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_RADIO, tpacpi_inputdev->swbit); + set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); } if (tp_features.hotkey_tablet) { set_bit(EV_SW, tpacpi_inputdev->evbit); -- cgit v0.10.2 From 9c0a76e16ee6648f4bd19563e9fe12a4f4fabba1 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:10 -0300 Subject: thinkpad-acpi: fix initialization error paths Rework some subdriver init and exit handlers, in order to fix some initialization error paths that were missing, or broken. Hitting those bugs should be extremely rare in the real world, but should that happen, thinkpad-acpi would fail to dealocate some resources and a reboot might well be needed to be able to load the driver again. Signed-off-by: Henrique de Moraes Holschuh Signed-off-by: Len Brown diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index f81e048..58973da 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -1921,6 +1921,29 @@ static struct attribute *hotkey_mask_attributes[] __initdata = { &dev_attr_hotkey_wakeup_hotunplug_complete.attr, }; +static void hotkey_exit(void) +{ +#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL + hotkey_poll_stop_sync(); +#endif + + if (hotkey_dev_attributes) + delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); + + kfree(hotkey_keycode_map); + + if (tp_features.hotkey) { + dbg_printk(TPACPI_DBG_EXIT, + "restoring original hot key mask\n"); + /* no short-circuit boolean operator below! */ + if ((hotkey_mask_set(hotkey_orig_mask) | + hotkey_status_set(hotkey_orig_status)) != 0) + printk(TPACPI_ERR + "failed to restore hot key mask " + "to BIOS defaults\n"); + } +} + static int __init hotkey_init(struct ibm_init_struct *iibm) { /* Requirements for changing the default keymaps: @@ -2060,226 +2083,220 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) vdbg_printk(TPACPI_DBG_INIT, "hotkeys are %s\n", str_supported(tp_features.hotkey)); - if (tp_features.hotkey) { - hotkey_dev_attributes = create_attr_set(13, NULL); - if (!hotkey_dev_attributes) - return -ENOMEM; - res = add_many_to_attr_set(hotkey_dev_attributes, - hotkey_attributes, - ARRAY_SIZE(hotkey_attributes)); - if (res) - return res; + if (!tp_features.hotkey) + return 1; - /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, - A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking - for HKEY interface version 0x100 */ - if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { - if ((hkeyv >> 8) != 1) { - printk(TPACPI_ERR "unknown version of the " - "HKEY interface: 0x%x\n", hkeyv); - printk(TPACPI_ERR "please report this to %s\n", - TPACPI_MAIL); - } else { - /* - * MHKV 0x100 in A31, R40, R40e, - * T4x, X31, and later - */ - tp_features.hotkey_mask = 1; - } + hotkey_dev_attributes = create_attr_set(13, NULL); + if (!hotkey_dev_attributes) + return -ENOMEM; + res = add_many_to_attr_set(hotkey_dev_attributes, + hotkey_attributes, + ARRAY_SIZE(hotkey_attributes)); + if (res) + goto err_exit; + + /* mask not supported on 570, 600e/x, 770e, 770x, A21e, A2xm/p, + A30, R30, R31, T20-22, X20-21, X22-24. Detected by checking + for HKEY interface version 0x100 */ + if (acpi_evalf(hkey_handle, &hkeyv, "MHKV", "qd")) { + if ((hkeyv >> 8) != 1) { + printk(TPACPI_ERR "unknown version of the " + "HKEY interface: 0x%x\n", hkeyv); + printk(TPACPI_ERR "please report this to %s\n", + TPACPI_MAIL); + } else { + /* + * MHKV 0x100 in A31, R40, R40e, + * T4x, X31, and later + */ + tp_features.hotkey_mask = 1; } + } - vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", - str_supported(tp_features.hotkey_mask)); + vdbg_printk(TPACPI_DBG_INIT, "hotkey masks are %s\n", + str_supported(tp_features.hotkey_mask)); - if (tp_features.hotkey_mask) { - if (!acpi_evalf(hkey_handle, &hotkey_all_mask, - "MHKA", "qd")) { - printk(TPACPI_ERR - "missing MHKA handler, " - "please report this to %s\n", - TPACPI_MAIL); - /* FN+F12, FN+F4, FN+F3 */ - hotkey_all_mask = 0x080cU; - } + if (tp_features.hotkey_mask) { + if (!acpi_evalf(hkey_handle, &hotkey_all_mask, + "MHKA", "qd")) { + printk(TPACPI_ERR + "missing MHKA handler, " + "please report this to %s\n", + TPACPI_MAIL); + /* FN+F12, FN+F4, FN+F3 */ + hotkey_all_mask = 0x080cU; } + } - /* hotkey_source_mask *must* be zero for - * the first hotkey_mask_get */ - res = hotkey_status_get(&hotkey_orig_status); - if (!res && tp_features.hotkey_mask) { - res = hotkey_mask_get(); - hotkey_orig_mask = hotkey_mask; - if (!res) { - res = add_many_to_attr_set( - hotkey_dev_attributes, - hotkey_mask_attributes, - ARRAY_SIZE(hotkey_mask_attributes)); - } - } + /* hotkey_source_mask *must* be zero for + * the first hotkey_mask_get */ + res = hotkey_status_get(&hotkey_orig_status); + if (res) + goto err_exit; + + if (tp_features.hotkey_mask) { + res = hotkey_mask_get(); + if (res) + goto err_exit; + + hotkey_orig_mask = hotkey_mask; + res = add_many_to_attr_set( + hotkey_dev_attributes, + hotkey_mask_attributes, + ARRAY_SIZE(hotkey_mask_attributes)); + if (res) + goto err_exit; + } #ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL - if (tp_features.hotkey_mask) { - hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK - & ~hotkey_all_mask; - } else { - hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; - } + if (tp_features.hotkey_mask) { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK + & ~hotkey_all_mask; + } else { + hotkey_source_mask = TPACPI_HKEY_NVRAM_GOOD_MASK; + } - vdbg_printk(TPACPI_DBG_INIT, - "hotkey source mask 0x%08x, polling freq %d\n", - hotkey_source_mask, hotkey_poll_freq); + vdbg_printk(TPACPI_DBG_INIT, + "hotkey source mask 0x%08x, polling freq %d\n", + hotkey_source_mask, hotkey_poll_freq); #endif - /* Not all thinkpads have a hardware radio switch */ - if (!res && acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { - tp_features.hotkey_wlsw = 1; - printk(TPACPI_INFO - "radio switch found; radios are %s\n", - enabled(status, 0)); - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_radio_sw.attr); - } + /* Not all thinkpads have a hardware radio switch */ + if (acpi_evalf(hkey_handle, &status, "WLSW", "qd")) { + tp_features.hotkey_wlsw = 1; + printk(TPACPI_INFO + "radio switch found; radios are %s\n", + enabled(status, 0)); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_radio_sw.attr); + } - /* For X41t, X60t, X61t Tablets... */ - if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { - tp_features.hotkey_tablet = 1; - printk(TPACPI_INFO - "possible tablet mode switch found; " - "ThinkPad in %s mode\n", - (status & TP_HOTKEY_TABLET_MASK)? - "tablet" : "laptop"); - res = add_to_attr_set(hotkey_dev_attributes, - &dev_attr_hotkey_tablet_mode.attr); - } + /* For X41t, X60t, X61t Tablets... */ + if (!res && acpi_evalf(hkey_handle, &status, "MHKG", "qd")) { + tp_features.hotkey_tablet = 1; + printk(TPACPI_INFO + "possible tablet mode switch found; " + "ThinkPad in %s mode\n", + (status & TP_HOTKEY_TABLET_MASK)? + "tablet" : "laptop"); + res = add_to_attr_set(hotkey_dev_attributes, + &dev_attr_hotkey_tablet_mode.attr); + } - if (!res) - res = register_attr_set_with_sysfs( - hotkey_dev_attributes, - &tpacpi_pdev->dev.kobj); - if (res) - return res; + if (!res) + res = register_attr_set_with_sysfs( + hotkey_dev_attributes, + &tpacpi_pdev->dev.kobj); + if (res) + goto err_exit; - /* Set up key map */ + /* Set up key map */ - hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, - GFP_KERNEL); - if (!hotkey_keycode_map) { - printk(TPACPI_ERR - "failed to allocate memory for key map\n"); - return -ENOMEM; - } + hotkey_keycode_map = kmalloc(TPACPI_HOTKEY_MAP_SIZE, + GFP_KERNEL); + if (!hotkey_keycode_map) { + printk(TPACPI_ERR + "failed to allocate memory for key map\n"); + res = -ENOMEM; + goto err_exit; + } - if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { - dbg_printk(TPACPI_DBG_INIT, - "using Lenovo default hot key map\n"); - memcpy(hotkey_keycode_map, &lenovo_keycode_map, - TPACPI_HOTKEY_MAP_SIZE); + if (thinkpad_id.vendor == PCI_VENDOR_ID_LENOVO) { + dbg_printk(TPACPI_DBG_INIT, + "using Lenovo default hot key map\n"); + memcpy(hotkey_keycode_map, &lenovo_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } else { + dbg_printk(TPACPI_DBG_INIT, + "using IBM default hot key map\n"); + memcpy(hotkey_keycode_map, &ibm_keycode_map, + TPACPI_HOTKEY_MAP_SIZE); + } + + set_bit(EV_KEY, tpacpi_inputdev->evbit); + set_bit(EV_MSC, tpacpi_inputdev->evbit); + set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); + tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; + tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; + tpacpi_inputdev->keycode = hotkey_keycode_map; + for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { + if (hotkey_keycode_map[i] != KEY_RESERVED) { + set_bit(hotkey_keycode_map[i], + tpacpi_inputdev->keybit); } else { - dbg_printk(TPACPI_DBG_INIT, - "using IBM default hot key map\n"); - memcpy(hotkey_keycode_map, &ibm_keycode_map, - TPACPI_HOTKEY_MAP_SIZE); - } - - set_bit(EV_KEY, tpacpi_inputdev->evbit); - set_bit(EV_MSC, tpacpi_inputdev->evbit); - set_bit(MSC_SCAN, tpacpi_inputdev->mscbit); - tpacpi_inputdev->keycodesize = TPACPI_HOTKEY_MAP_TYPESIZE; - tpacpi_inputdev->keycodemax = TPACPI_HOTKEY_MAP_LEN; - tpacpi_inputdev->keycode = hotkey_keycode_map; - for (i = 0; i < TPACPI_HOTKEY_MAP_LEN; i++) { - if (hotkey_keycode_map[i] != KEY_RESERVED) { - set_bit(hotkey_keycode_map[i], - tpacpi_inputdev->keybit); - } else { - if (i < sizeof(hotkey_reserved_mask)*8) - hotkey_reserved_mask |= 1 << i; - } - } - - if (tp_features.hotkey_wlsw) { - set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); - } - if (tp_features.hotkey_tablet) { - set_bit(EV_SW, tpacpi_inputdev->evbit); - set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + if (i < sizeof(hotkey_reserved_mask)*8) + hotkey_reserved_mask |= 1 << i; } + } - /* Do not issue duplicate brightness change events to - * userspace */ - if (!tp_features.bright_acpimode) - /* update bright_acpimode... */ - tpacpi_check_std_acpi_brightness_support(); - - if (tp_features.bright_acpimode) { - printk(TPACPI_INFO - "This ThinkPad has standard ACPI backlight " - "brightness control, supported by the ACPI " - "video driver\n"); - printk(TPACPI_NOTICE - "Disabling thinkpad-acpi brightness events " - "by default...\n"); - - /* The hotkey_reserved_mask change below is not - * necessary while the keys are at KEY_RESERVED in the - * default map, but better safe than sorry, leave it - * here as a marker of what we have to do, especially - * when we finally become able to set this at runtime - * on response to X.org requests */ - hotkey_reserved_mask |= - (1 << TP_ACPI_HOTKEYSCAN_FNHOME) - | (1 << TP_ACPI_HOTKEYSCAN_FNEND); - } + if (tp_features.hotkey_wlsw) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_RFKILL_ALL, tpacpi_inputdev->swbit); + } + if (tp_features.hotkey_tablet) { + set_bit(EV_SW, tpacpi_inputdev->evbit); + set_bit(SW_TABLET_MODE, tpacpi_inputdev->swbit); + } - dbg_printk(TPACPI_DBG_INIT, - "enabling hot key handling\n"); - res = hotkey_status_set(1); - if (res) - return res; - res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask) - & ~hotkey_reserved_mask) - | hotkey_orig_mask); - if (res < 0 && res != -ENXIO) - return res; + /* Do not issue duplicate brightness change events to + * userspace */ + if (!tp_features.bright_acpimode) + /* update bright_acpimode... */ + tpacpi_check_std_acpi_brightness_support(); - dbg_printk(TPACPI_DBG_INIT, - "legacy hot key reporting over procfs %s\n", - (hotkey_report_mode < 2) ? - "enabled" : "disabled"); + if (tp_features.bright_acpimode) { + printk(TPACPI_INFO + "This ThinkPad has standard ACPI backlight " + "brightness control, supported by the ACPI " + "video driver\n"); + printk(TPACPI_NOTICE + "Disabling thinkpad-acpi brightness events " + "by default...\n"); + + /* The hotkey_reserved_mask change below is not + * necessary while the keys are at KEY_RESERVED in the + * default map, but better safe than sorry, leave it + * here as a marker of what we have to do, especially + * when we finally become able to set this at runtime + * on response to X.org requests */ + hotkey_reserved_mask |= + (1 << TP_ACPI_HOTKEYSCAN_FNHOME) + | (1 << TP_ACPI_HOTKEYSCAN_FNEND); + } + + dbg_printk(TPACPI_DBG_INIT, "enabling hot key handling\n"); + res = hotkey_status_set(1); + if (res) { + hotkey_exit(); + return res; + } + res = hotkey_mask_set(((hotkey_all_mask | hotkey_source_mask) + & ~hotkey_reserved_mask) + | hotkey_orig_mask); + if (res < 0 && res != -ENXIO) { + hotkey_exit(); + return res; + } - tpacpi_inputdev->open = &hotkey_inputdev_open; - tpacpi_inputdev->close = &hotkey_inputdev_close; + dbg_printk(TPACPI_DBG_INIT, + "legacy hot key reporting over procfs %s\n", + (hotkey_report_mode < 2) ? + "enabled" : "disabled"); - hotkey_poll_setup_safe(1); - tpacpi_input_send_radiosw(); - tpacpi_input_send_tabletsw(); - } + tpacpi_inputdev->open = &hotkey_inputdev_open; + tpacpi_inputdev->close = &hotkey_inputdev_close; - return (tp_features.hotkey)? 0 : 1; -} + hotkey_poll_setup_safe(1); + tpacpi_input_send_radiosw(); + tpacpi_input_send_tabletsw(); -static void hotkey_exit(void) -{ -#ifdef CONFIG_THINKPAD_ACPI_HOTKEY_POLL - hotkey_poll_stop_sync(); -#endif + return 0; - if (tp_features.hotkey) { - dbg_printk(TPACPI_DBG_EXIT, - "restoring original hot key mask\n"); - /* no short-circuit boolean operator below! */ - if ((hotkey_mask_set(hotkey_orig_mask) | - hotkey_status_set(hotkey_orig_status)) != 0) - printk(TPACPI_ERR - "failed to restore hot key mask " - "to BIOS defaults\n"); - } +err_exit: + delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); + hotkey_dev_attributes = NULL; - if (hotkey_dev_attributes) { - delete_attr_set(hotkey_dev_attributes, &tpacpi_pdev->dev.kobj); - hotkey_dev_attributes = NULL; - } + return (res < 0)? res : 1; } static void hotkey_notify(struct ibm_struct *ibm, u32 event) @@ -3319,7 +3336,7 @@ static struct tpacpi_led_classdev tpacpi_led_thinklight = { static int __init light_init(struct ibm_init_struct *iibm) { - int rc = 0; + int rc; vdbg_printk(TPACPI_DBG_INIT, "initializing light subdriver\n"); @@ -3337,20 +3354,23 @@ static int __init light_init(struct ibm_init_struct *iibm) tp_features.light_status = acpi_evalf(ec_handle, NULL, "KBLT", "qv"); - vdbg_printk(TPACPI_DBG_INIT, "light is %s\n", - str_supported(tp_features.light)); + vdbg_printk(TPACPI_DBG_INIT, "light is %s, light status is %s\n", + str_supported(tp_features.light), + str_supported(tp_features.light_status)); - if (tp_features.light) { - rc = led_classdev_register(&tpacpi_pdev->dev, - &tpacpi_led_thinklight.led_classdev); - } + if (!tp_features.light) + return 1; + + rc = led_classdev_register(&tpacpi_pdev->dev, + &tpacpi_led_thinklight.led_classdev); if (rc < 0) { tp_features.light = 0; tp_features.light_status = 0; - } else { - rc = (tp_features.light)? 0 : 1; + } else { + rc = 0; } + return rc; } @@ -3978,7 +3998,6 @@ static void led_exit(void) } kfree(tpacpi_leds); - tpacpi_leds = NULL; } static int __init led_init(struct ibm_init_struct *iibm) @@ -4802,7 +4821,6 @@ static void brightness_exit(void) vdbg_printk(TPACPI_DBG_EXIT, "calling backlight_device_unregister()\n"); backlight_device_unregister(ibm_backlight_device); - ibm_backlight_device = NULL; } } @@ -5764,11 +5782,16 @@ static int __init fan_init(struct ibm_init_struct *iibm) fan_control_access_mode != TPACPI_FAN_WR_NONE) { rc = sysfs_create_group(&tpacpi_sensors_pdev->dev.kobj, &fan_attr_group); - if (!(rc < 0)) - rc = driver_create_file(&tpacpi_hwmon_pdriver.driver, - &driver_attr_fan_watchdog); if (rc < 0) return rc; + + rc = driver_create_file(&tpacpi_hwmon_pdriver.driver, + &driver_attr_fan_watchdog); + if (rc < 0) { + sysfs_remove_group(&tpacpi_sensors_pdev->dev.kobj, + &fan_attr_group); + return rc; + } return 0; } else return 1; -- cgit v0.10.2 From 24e45bbe695719dca8c20e03d386eb6ea86526b5 Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Tue, 3 Jun 2008 23:36:11 -0300 Subject: thinkpad-acpi: fix LED handling on older ThinkPads The less tested codepaths for LED handling, used on ThinkPads 570, 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 and maybe a few others, would write data to kernel memory it had no business touching, for leds number 3 and above. If one is lucky, that illegal write would cause an OOPS, but chances are it would silently corrupt a byte. The problem was introduced in commit af116101, "ACPI: thinkpad-acpi: add sysfs led class support to thinkpad leds (v3.2)". Fix the bug by refactoring the entire code to be far more obvious on what it wants to do. Also do some defensive "constification". Issue reported by Karol Lewandowski (he's an lucky guy and got an OOPS instead of silent corruption :-) ). Root cause of the OOPS identified by Adrian Bunk . Thanks, Adrian! Signed-off-by: Henrique de Moraes Holschuh Tested-by: Karol Lewandowski Signed-off-by: Len Brown diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index 58973da..b596929 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3853,7 +3853,7 @@ static const char * const tpacpi_led_names[TPACPI_LED_NUMLEDS] = { "tpacpi::standby", }; -static int led_get_status(unsigned int led) +static int led_get_status(const unsigned int led) { int status; enum led_status_t led_s; @@ -3877,41 +3877,42 @@ static int led_get_status(unsigned int led) /* not reached */ } -static int led_set_status(unsigned int led, enum led_status_t ledstatus) +static int led_set_status(const unsigned int led, + const enum led_status_t ledstatus) { /* off, on, blink. Index is led_status_t */ - static const int led_sled_arg1[] = { 0, 1, 3 }; - static const int led_exp_hlbl[] = { 0, 0, 1 }; /* led# * */ - static const int led_exp_hlcl[] = { 0, 1, 1 }; /* led# * */ - static const int led_led_arg1[] = { 0, 0x80, 0xc0 }; + static const unsigned int led_sled_arg1[] = { 0, 1, 3 }; + static const unsigned int led_led_arg1[] = { 0, 0x80, 0xc0 }; int rc = 0; switch (led_supported) { case TPACPI_LED_570: - /* 570 */ - led = 1 << led; - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_sled_arg1[ledstatus])) - rc = -EIO; - break; + /* 570 */ + if (led > 7) + return -EINVAL; + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + (1 << led), led_sled_arg1[ledstatus])) + rc = -EIO; + break; case TPACPI_LED_OLD: - /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ - led = 1 << led; - rc = ec_write(TPACPI_LED_EC_HLMS, led); - if (rc >= 0) - rc = ec_write(TPACPI_LED_EC_HLBL, - led * led_exp_hlbl[ledstatus]); - if (rc >= 0) - rc = ec_write(TPACPI_LED_EC_HLCL, - led * led_exp_hlcl[ledstatus]); - break; + /* 600e/x, 770e, 770x, A21e, A2xm/p, T20-22, X20 */ + if (led > 7) + return -EINVAL; + rc = ec_write(TPACPI_LED_EC_HLMS, (1 << led)); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLBL, + (ledstatus == TPACPI_LED_BLINK) << led); + if (rc >= 0) + rc = ec_write(TPACPI_LED_EC_HLCL, + (ledstatus != TPACPI_LED_OFF) << led); + break; case TPACPI_LED_NEW: - /* all others */ - if (!acpi_evalf(led_handle, NULL, NULL, "vdd", - led, led_led_arg1[ledstatus])) - rc = -EIO; - break; + /* all others */ + if (!acpi_evalf(led_handle, NULL, NULL, "vdd", + led, led_led_arg1[ledstatus])) + rc = -EIO; + break; default: rc = -ENXIO; } -- cgit v0.10.2 From 1b7fc5aae8867046f8d3d45808309d5b7f2e036a Mon Sep 17 00:00:00 2001 From: Alexey Starikovskiy Date: Fri, 6 Jun 2008 11:49:33 -0400 Subject: ACPI: EC: Use msleep instead of udelay while waiting for event. http://bugzilla.kernel.org/show_bug.cgi?id=10724 Signed-off-by: Alexey Starikovskiy Signed-off-by: Len Brown diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 0924992..5622aee 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -194,7 +194,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) while (time_before(jiffies, delay)) { if (acpi_ec_check_status(ec, event)) return 0; - udelay(ACPI_EC_UDELAY); + msleep(1); } } pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n", -- cgit v0.10.2 From c21d1e7f53ffd9c0f162c42e7fde07d1c45fa127 Mon Sep 17 00:00:00 2001 From: Alistair John Strachan Date: Mon, 12 May 2008 19:13:09 +0100 Subject: ACPI 2.6.26-rc2: Add missing newline to DSDT/SSDT warning message As of recently (probably 2.6.26-rc1) I've been getting the following mangling in the kernel log: [4294014.568167] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"<6>CPU0: Intel(R) Pentium(R) Dual CPU E2160 @ 1.80GHz stepping 0d This is due to a missing newline character in the first message. The following patch against 2.6.26-rc2 fixes it. Please apply. Signed-off-by: Alistair John Strachan Signed-off-by: Len Brown diff --git a/drivers/acpi/tables/tbxface.c b/drivers/acpi/tables/tbxface.c index fb57b93..0e31960 100644 --- a/drivers/acpi/tables/tbxface.c +++ b/drivers/acpi/tables/tbxface.c @@ -540,7 +540,7 @@ static acpi_status acpi_tb_load_namespace(void) acpi_tb_print_table_header(0, table); if (no_auto_ssdt == 0) { - printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\""); + printk(KERN_WARNING "ACPI: DSDT override uses original SSDTs unless \"acpi_no_auto_ssdt\"\n"); } } -- cgit v0.10.2 From 0638bc8dc037d844efe1d4abf44488c037705905 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Tue, 20 May 2008 01:08:23 +0300 Subject: MAINTAINERS: update ACPI homepage This patch updates the location of the ACPI homepage in MAINTAINERS. Signed-off-by: Adrian Bunk Signed-off-by: Len Brown diff --git a/MAINTAINERS b/MAINTAINERS index e3560df..9d43042 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -228,21 +228,21 @@ ACPI BATTERY DRIVERS P: Alexey Starikovskiy M: astarikovskiy@suse.de L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI EC DRIVER P: Alexey Starikovskiy M: astarikovskiy@suse.de L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI FAN DRIVER P: Len Brown M: len.brown@intel.com L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI PCI HOTPLUG DRIVER @@ -255,14 +255,14 @@ ACPI THERMAL DRIVER P: Len Brown M: len.brown@intel.com L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI VIDEO DRIVER P: Rui Zhang M: rui.zhang@intel.com L: linux-acpi@vger.kernel.org -W: http://acpi.sourceforge.net/ +W: http://www.lesswatts.org/projects/acpi/ S: Supported ACPI WMI DRIVER -- cgit v0.10.2 From e9fe9e188118a0a34c6200d9b10ea6247f53592d Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:04 -0700 Subject: pnpacpi: fix IRQ flag decoding When decoding IRQ trigger mode and polarity, it is not enough to mask by IORESOURCE_BITS because there are now additional bits defined. For example, if IORESOURCE_IRQ_SHAREABLE was set, we failed to set *triggering and *polarity at all. I can't point to a failure that this patch fixes, but bugs in this area have caused problems when resuming after suspend, for example: http://bugzilla.kernel.org/show_bug.cgi?id=6316 http://bugzilla.kernel.org/show_bug.cgi?id=9487 https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/152187 This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 [rene.herman@keyaccess.nl: fix comment] Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 0201c8a..ab09fe6 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -56,9 +56,11 @@ static int irq_flags(int triggering, int polarity, int shareable) return flags; } -static void decode_irq_flags(int flag, int *triggering, int *polarity) +static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, + int *polarity) { - switch (flag) { + switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL | + IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) { case IORESOURCE_IRQ_LOWLEVEL: *triggering = ACPI_LEVEL_SENSITIVE; *polarity = ACPI_ACTIVE_LOW; @@ -75,6 +77,12 @@ static void decode_irq_flags(int flag, int *triggering, int *polarity) *triggering = ACPI_EDGE_SENSITIVE; *polarity = ACPI_ACTIVE_HIGH; break; + default: + dev_err(&dev->dev, "can't encode invalid IRQ mode %#x\n", + flags); + *triggering = ACPI_EDGE_SENSITIVE; + *polarity = ACPI_ACTIVE_HIGH; + break; } } @@ -790,7 +798,7 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, struct acpi_resource_irq *irq = &resource->data.irq; int triggering, polarity; - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity); irq->triggering = triggering; irq->polarity = polarity; if (triggering == ACPI_EDGE_SENSITIVE) @@ -813,7 +821,7 @@ static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq; int triggering, polarity; - decode_irq_flags(p->flags & IORESOURCE_BITS, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity); extended_irq->producer_consumer = ACPI_CONSUMER; extended_irq->triggering = triggering; extended_irq->polarity = polarity; diff --git a/include/linux/ioport.h b/include/linux/ioport.h index d5d40a9..c6801bf 100644 --- a/include/linux/ioport.h +++ b/include/linux/ioport.h @@ -53,14 +53,14 @@ struct resource_list { #define IORESOURCE_AUTO 0x40000000 #define IORESOURCE_BUSY 0x80000000 /* Driver has marked this resource busy */ -/* ISA PnP IRQ specific bits (IORESOURCE_BITS) */ +/* PnP IRQ specific bits (IORESOURCE_BITS) */ #define IORESOURCE_IRQ_HIGHEDGE (1<<0) #define IORESOURCE_IRQ_LOWEDGE (1<<1) #define IORESOURCE_IRQ_HIGHLEVEL (1<<2) #define IORESOURCE_IRQ_LOWLEVEL (1<<3) #define IORESOURCE_IRQ_SHAREABLE (1<<4) -/* ISA PnP DMA specific bits (IORESOURCE_BITS) */ +/* PnP DMA specific bits (IORESOURCE_BITS) */ #define IORESOURCE_DMA_TYPE_MASK (3<<0) #define IORESOURCE_DMA_8BIT (0<<0) #define IORESOURCE_DMA_8AND16BIT (1<<0) @@ -76,7 +76,7 @@ struct resource_list { #define IORESOURCE_DMA_TYPEB (2<<6) #define IORESOURCE_DMA_TYPEF (3<<6) -/* ISA PnP memory I/O specific bits (IORESOURCE_BITS) */ +/* PnP memory I/O specific bits (IORESOURCE_BITS) */ #define IORESOURCE_MEM_WRITEABLE (1<<0) /* dup: IORESOURCE_READONLY */ #define IORESOURCE_MEM_CACHEABLE (1<<1) /* dup: IORESOURCE_CACHEABLE */ #define IORESOURCE_MEM_RANGELENGTH (1<<2) /* dup: IORESOURCE_RANGELENGTH */ -- cgit v0.10.2 From a993273beae8022390e48fe9205480565ad470ab Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:05 -0700 Subject: pnpacpi: fix shareable IRQ encode/decode When we encode IRQ resources, we should use the "shareable" flag we got from _PRS rather than guessing based on the IRQ trigger mode. This is based on a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c32 Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index ab09fe6..8681ff6 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -50,14 +50,14 @@ static int irq_flags(int triggering, int polarity, int shareable) flags = IORESOURCE_IRQ_HIGHEDGE; } - if (shareable) + if (shareable == ACPI_SHARED) flags |= IORESOURCE_IRQ_SHAREABLE; return flags; } static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, - int *polarity) + int *polarity, int *shareable) { switch (flags & (IORESOURCE_IRQ_LOWLEVEL | IORESOURCE_IRQ_HIGHLEVEL | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE)) { @@ -84,6 +84,11 @@ static void decode_irq_flags(struct pnp_dev *dev, int flags, int *triggering, *polarity = ACPI_ACTIVE_HIGH; break; } + + if (flags & IORESOURCE_IRQ_SHAREABLE) + *shareable = ACPI_SHARED; + else + *shareable = ACPI_EXCLUSIVE; } static void pnpacpi_parse_allocated_irqresource(struct pnp_dev *dev, @@ -796,15 +801,12 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, struct resource *p) { struct acpi_resource_irq *irq = &resource->data.irq; - int triggering, polarity; + int triggering, polarity, shareable; - decode_irq_flags(dev, p->flags, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); irq->triggering = triggering; irq->polarity = polarity; - if (triggering == ACPI_EDGE_SENSITIVE) - irq->sharable = ACPI_EXCLUSIVE; - else - irq->sharable = ACPI_SHARED; + irq->sharable = shareable; irq->interrupt_count = 1; irq->interrupts[0] = p->start; @@ -819,16 +821,13 @@ static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, struct resource *p) { struct acpi_resource_extended_irq *extended_irq = &resource->data.extended_irq; - int triggering, polarity; + int triggering, polarity, shareable; - decode_irq_flags(dev, p->flags, &triggering, &polarity); + decode_irq_flags(dev, p->flags, &triggering, &polarity, &shareable); extended_irq->producer_consumer = ACPI_CONSUMER; extended_irq->triggering = triggering; extended_irq->polarity = polarity; - if (triggering == ACPI_EDGE_SENSITIVE) - extended_irq->sharable = ACPI_EXCLUSIVE; - else - extended_irq->sharable = ACPI_SHARED; + extended_irq->sharable = shareable; extended_irq->interrupt_count = 1; extended_irq->interrupts[0] = p->start; -- cgit v0.10.2 From 36d872a370d3d10e5a7faa9dcacce744260fb13b Mon Sep 17 00:00:00 2001 From: Bjorn Helgaas Date: Mon, 9 Jun 2008 16:52:06 -0700 Subject: PNPACPI: use _CRS IRQ descriptor length for _SRS When configuring the resources of an ACPI device, we first evaluate _CRS to get a template of resource descriptors, then fill in the specific resource values we want, and finally evaluate _SRS to actually configure the device. Some resources have optional fields, so the size of encoded descriptors varies depending on the specific values. For example, IRQ descriptors can be either two or three bytes long. The third byte contains triggering information and can be omitted if the IRQ is edge-triggered and active high. The BIOS often assumes that IRQ descriptors in the _SRS buffer use the same format as those in the _CRS buffer, so this patch enforces that constraint. The "Start Dependent Function" descriptor also has an optional byte, but we don't currently encode those descriptors, so I didn't do anything for those. I have tested this patch on a Toshiba Portege 4000. Without the patch, parport_pc claims the parallel port only if I use "pnpacpi=off". This patch makes it work with PNPACPI. This is an extension of a patch by Tom Jaeger: http://bugzilla.kernel.org/show_bug.cgi?id=9487#c42 References: http://bugzilla.kernel.org/show_bug.cgi?id=5832 Enabling ACPI Plug and Play in kernels >2.6.9 kills Parallel support http://bugzilla.kernel.org/show_bug.cgi?id=9487 buggy firmware expects four-byte IRQ resource descriptor (was: Serial port disappears after Suspend on Toshiba R25) http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=1d5b285da1893b90507b081664ac27f1a8a3dc5b related ACPICA fix Signed-off-by: Bjorn Helgaas Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index 8681ff6..46c791a 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -755,6 +755,9 @@ static acpi_status pnpacpi_type_resources(struct acpi_resource *res, void *data) if (pnpacpi_supported_resource(res)) { (*resource)->type = res->type; (*resource)->length = sizeof(struct acpi_resource); + if (res->type == ACPI_RESOURCE_TYPE_IRQ) + (*resource)->data.irq.descriptor_length = + res->data.irq.descriptor_length; (*resource)++; } @@ -810,10 +813,12 @@ static void pnpacpi_encode_irq(struct pnp_dev *dev, irq->interrupt_count = 1; irq->interrupts[0] = p->start; - dev_dbg(&dev->dev, " encode irq %d %s %s %s\n", (int) p->start, + dev_dbg(&dev->dev, " encode irq %d %s %s %s (%d-byte descriptor)\n", + (int) p->start, triggering == ACPI_LEVEL_SENSITIVE ? "level" : "edge", polarity == ACPI_ACTIVE_LOW ? "low" : "high", - irq->sharable == ACPI_SHARED ? "shared" : "exclusive"); + irq->sharable == ACPI_SHARED ? "shared" : "exclusive", + irq->descriptor_length); } static void pnpacpi_encode_ext_irq(struct pnp_dev *dev, -- cgit v0.10.2 From 39b8931b5cad9a7cbcd2394a40a088311e783a82 Mon Sep 17 00:00:00 2001 From: Fenghua Yu Date: Mon, 9 Jun 2008 16:48:18 -0700 Subject: ACPI: handle invalid ACPI SLIT table This is a SLIT sanity checking patch. It moves slit_valid() function to generic ACPI code and does sanity checking for both x86 and ia64. It sets up node_distance with LOCAL_DISTANCE and REMOTE_DISTANCE when hitting invalid SLIT table on ia64. It also cleans up unused variable localities in acpi_parse_slit() on x86. Signed-off-by: Fenghua Yu Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/arch/ia64/kernel/acpi.c b/arch/ia64/kernel/acpi.c index 853d1f1..43687cc 100644 --- a/arch/ia64/kernel/acpi.c +++ b/arch/ia64/kernel/acpi.c @@ -465,7 +465,6 @@ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) printk(KERN_ERR "ACPI 2.0 SLIT: size mismatch: %d expected, %d actual\n", len, slit->header.length); - memset(numa_slit, 10, sizeof(numa_slit)); return; } slit_table = slit; @@ -574,8 +573,14 @@ void __init acpi_numa_arch_fixup(void) printk(KERN_INFO "Number of memory chunks in system = %d\n", num_node_memblks); - if (!slit_table) + if (!slit_table) { + for (i = 0; i < MAX_NUMNODES; i++) + for (j = 0; j < MAX_NUMNODES; j++) + node_distance(i, j) = i == j ? LOCAL_DISTANCE : + REMOTE_DISTANCE; return; + } + memset(numa_slit, -1, sizeof(numa_slit)); for (i = 0; i < slit_table->locality_count; i++) { if (!pxm_bit_test(i)) diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 3890234..99649dc 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -97,36 +97,9 @@ static __init inline int srat_disabled(void) return numa_off || acpi_numa < 0; } -/* - * A lot of BIOS fill in 10 (= no distance) everywhere. This messes - * up the NUMA heuristics which wants the local node to have a smaller - * distance than the others. - * Do some quick checks here and only use the SLIT if it passes. - */ -static __init int slit_valid(struct acpi_table_slit *slit) -{ - int i, j; - int d = slit->locality_count; - for (i = 0; i < d; i++) { - for (j = 0; j < d; j++) { - u8 val = slit->entry[d*i + j]; - if (i == j) { - if (val != LOCAL_DISTANCE) - return 0; - } else if (val <= LOCAL_DISTANCE) - return 0; - } - } - return 1; -} - /* Callback for SLIT parsing */ void __init acpi_numa_slit_init(struct acpi_table_slit *slit) { - if (!slit_valid(slit)) { - printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n"); - return; - } acpi_slit = slit; } diff --git a/drivers/acpi/numa.c b/drivers/acpi/numa.c index 5d59cb3..658e5f3 100644 --- a/drivers/acpi/numa.c +++ b/drivers/acpi/numa.c @@ -140,19 +140,42 @@ acpi_table_print_srat_entry(struct acpi_subtable_header *header) } } +/* + * A lot of BIOS fill in 10 (= no distance) everywhere. This messes + * up the NUMA heuristics which wants the local node to have a smaller + * distance than the others. + * Do some quick checks here and only use the SLIT if it passes. + */ +static __init int slit_valid(struct acpi_table_slit *slit) +{ + int i, j; + int d = slit->locality_count; + for (i = 0; i < d; i++) { + for (j = 0; j < d; j++) { + u8 val = slit->entry[d*i + j]; + if (i == j) { + if (val != LOCAL_DISTANCE) + return 0; + } else if (val <= LOCAL_DISTANCE) + return 0; + } + } + return 1; +} + static int __init acpi_parse_slit(struct acpi_table_header *table) { struct acpi_table_slit *slit; - u32 localities; if (!table) return -EINVAL; slit = (struct acpi_table_slit *)table; - /* downcast just for %llu vs %lu for i386/ia64 */ - localities = (u32) slit->locality_count; - + if (!slit_valid(slit)) { + printk(KERN_INFO "ACPI: SLIT table looks invalid. Not used.\n"); + return -EINVAL; + } acpi_numa_slit_init(slit); return 0; -- cgit v0.10.2 From a66b34b26fe1b0983c6d91b6381df806cd98886e Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 9 Jun 2008 16:22:24 -0700 Subject: proper prototype for acpi_processor_tstate_has_changed() This patch adds a proper prototype for acpi_processor_tstate_has_changed() in include/acpi/processor.h Signed-off-by: Adrian Bunk Cc: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index 386e5aa..9dd0fa9 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -86,7 +86,6 @@ static int acpi_processor_info_open_fs(struct inode *inode, struct file *file); static void acpi_processor_notify(acpi_handle handle, u32 event, void *data); static acpi_status acpi_processor_hotadd_init(acpi_handle handle, int *p_cpu); static int acpi_processor_handle_eject(struct acpi_processor *pr); -extern int acpi_processor_tstate_has_changed(struct acpi_processor *pr); static const struct acpi_device_id processor_device_ids[] = { diff --git a/include/acpi/processor.h b/include/acpi/processor.h index 06480bc..06ebb6e 100644 --- a/include/acpi/processor.h +++ b/include/acpi/processor.h @@ -319,6 +319,7 @@ static inline int acpi_processor_ppc_has_changed(struct acpi_processor *pr) #endif /* CONFIG_CPU_FREQ */ /* in processor_throttling.c */ +int acpi_processor_tstate_has_changed(struct acpi_processor *pr); int acpi_processor_get_throttling_info(struct acpi_processor *pr); extern int acpi_processor_set_throttling(struct acpi_processor *pr, int state); extern struct file_operations acpi_processor_throttling_fops; -- cgit v0.10.2 From 1fdd68608614cd1e951fd93873fe5597374e8c54 Mon Sep 17 00:00:00 2001 From: Tim Pepper Date: Mon, 9 Jun 2008 16:22:25 -0700 Subject: dock.c remove trailing printk whitespace Signed-off-by: Tim Pepper Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index fa44fb9..96c542f 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -834,7 +834,7 @@ static int dock_add(acpi_handle handle) goto dock_add_err; } - printk(KERN_INFO PREFIX "%s \n", ACPI_DOCK_DRIVER_DESCRIPTION); + printk(KERN_INFO PREFIX "%s\n", ACPI_DOCK_DRIVER_DESCRIPTION); return 0; -- cgit v0.10.2 From 7efd52a407bed6a2b02015b8ebbff7beba155392 Mon Sep 17 00:00:00 2001 From: Holger Macht Date: Mon, 9 Jun 2008 16:22:24 -0700 Subject: bay: exit if notify handler cannot be installed If acpi_install_notify_handler() for a bay device fails, the bay driver is superfluous. Most likely, another driver (like libata) is already caring about this device anyway. Furthermore, register_hotplug_dock_device(acpi_handle) from the dock driver must not be called twice with the same handler. This would result in an endless loop consuming 100% of CPU. So clean up and exit. Signed-off-by: Holger Macht Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index d2fc941..26038c2 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -301,16 +301,20 @@ static int bay_add(acpi_handle handle, int id) */ pdev->dev.uevent_suppress = 0; - if (acpi_bay_add_fs(new_bay)) { - platform_device_unregister(new_bay->pdev); - goto bay_add_err; - } - /* register for events on this device */ status = acpi_install_notify_handler(handle, ACPI_SYSTEM_NOTIFY, bay_notify, new_bay); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Error installing bay notify handler\n"); + printk(KERN_INFO PREFIX "Error installing bay notify handler\n"); + platform_device_unregister(new_bay->pdev); + goto bay_add_err; + } + + if (acpi_bay_add_fs(new_bay)) { + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + bay_notify); + platform_device_unregister(new_bay->pdev); + goto bay_add_err; } /* if we are on a dock station, we should register for dock -- cgit v0.10.2 From 46a21e465e506bcd4dba759a39e7ef79978a705d Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Mon, 9 Jun 2008 16:22:26 -0700 Subject: ACPI: use memory_read_from_buffer() Signed-off-by: Akinobu Mita Acked-by: Zhang Rui Signed-off-by: Andrew Morton Signed-off-by: Len Brown diff --git a/drivers/acpi/system.c b/drivers/acpi/system.c index 769f248..5bd2dec 100644 --- a/drivers/acpi/system.c +++ b/drivers/acpi/system.c @@ -77,7 +77,6 @@ static ssize_t acpi_table_show(struct kobject *kobj, container_of(bin_attr, struct acpi_table_attr, attr); struct acpi_table_header *table_header = NULL; acpi_status status; - ssize_t ret_count = count; status = acpi_get_table(table_attr->name, table_attr->instance, @@ -85,18 +84,8 @@ static ssize_t acpi_table_show(struct kobject *kobj, if (ACPI_FAILURE(status)) return -ENODEV; - if (offset >= table_header->length) { - ret_count = 0; - goto end; - } - - if (offset + ret_count > table_header->length) - ret_count = table_header->length - offset; - - memcpy(buf, ((char *)table_header) + offset, ret_count); - - end: - return ret_count; + return memory_read_from_buffer(buf, count, &offset, + table_header, table_header->length); } static void acpi_table_attr_init(struct acpi_table_attr *table_attr, -- cgit v0.10.2 From 7aa7d4336df34e32195557a1ad422627bd69ef0b Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 13:00:32 +0800 Subject: ACPICA: Fix to allow zero-length ASL field declarations Allows null field list in Field(), BankField(), and IndexField(). 2.6.26-rc1 regression: ACPI fails to load SDT. - Dell M1530 http://bugzilla.kernel.org/show_bug.cgi?id=10606 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/dispatcher/dsfield.c b/drivers/acpi/dispatcher/dsfield.c index c780783..f988a5e 100644 --- a/drivers/acpi/dispatcher/dsfield.c +++ b/drivers/acpi/dispatcher/dsfield.c @@ -450,10 +450,6 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, return_ACPI_STATUS(AE_BAD_PARAMETER); } - if (!arg) { - return_ACPI_STATUS(AE_AML_NO_OPERAND); - } - /* Creating new namespace node(s), should not already exist */ flags = ACPI_NS_NO_UPSEARCH | ACPI_NS_DONT_OPEN_SCOPE | @@ -467,6 +463,7 @@ acpi_ds_init_field_objects(union acpi_parse_object *op, /* * Walk the list of entries in the field_list + * Note: field_list can be of zero length. In this case, Arg will be NULL. */ while (arg) { /* -- cgit v0.10.2 From bc45b1d39a925b56796bebf8a397a0491489d85c Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:12:50 +0800 Subject: ACPICA: Ignore ACPI table signature for Load() operator Only "SSDT" is acceptable to the ACPI spec, but tables are seen with OEMx and null sigs. Therefore, signature validation is worthless. Apparently MS ACPI accepts such signatures, ACPICA must be compatible. http://bugzilla.kernel.org/show_bug.cgi?id=10454 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/tables/tbinstal.c b/drivers/acpi/tables/tbinstal.c index 402f93e..5336ce8 100644 --- a/drivers/acpi/tables/tbinstal.c +++ b/drivers/acpi/tables/tbinstal.c @@ -123,24 +123,13 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, } } - /* The table must be either an SSDT or a PSDT or an OEMx */ - - if (!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_PSDT)&& - !ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT)&& - strncmp(table_desc->pointer->signature, "OEM", 3)) { - /* Check for a printable name */ - if (acpi_ut_valid_acpi_name( - *(u32 *) table_desc->pointer->signature)) { - ACPI_ERROR((AE_INFO, "Table has invalid signature " - "[%4.4s], must be SSDT or PSDT", - table_desc->pointer->signature)); - } else { - ACPI_ERROR((AE_INFO, "Table has invalid signature " - "(0x%8.8X), must be SSDT or PSDT", - *(u32 *) table_desc->pointer->signature)); - } - return_ACPI_STATUS(AE_BAD_SIGNATURE); - } + /* + * Originally, we checked the table signature for "SSDT" or "PSDT" here. + * Next, we added support for OEMx tables, signature "OEM". + * Valid tables were encountered with a null signature, so we've just + * given up on validating the signature, since it seems to be a waste + * of code. The original code was removed (05/2008). + */ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES); -- cgit v0.10.2 From 0bda3f2f86e233b00b46d91b07db25dd23ec15bc Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:14:17 +0800 Subject: ACPICA: Fix for Load operator, load table at the namespace root This reverts a change introduced in version 20071019. The table is now loaded at the namespace root even though this goes against the ACPI specification. This provides compatibility with other ACPI implementations. Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c index 24da921..39d7421 100644 --- a/drivers/acpi/executer/exconfig.c +++ b/drivers/acpi/executer/exconfig.c @@ -375,9 +375,15 @@ acpi_ex_load_op(union acpi_operand_object *obj_desc, goto cleanup; } + /* + * Add the table to the namespace. + * + * Note: We load the table objects relative to the root of the namespace. + * This appears to go against the ACPI specification, but we do it for + * compatibility with other ACPI implementations. + */ status = - acpi_ex_add_table(table_index, walk_state->scope_info->scope.node, - &ddb_handle); + acpi_ex_add_table(table_index, acpi_gbl_root_node, &ddb_handle); if (ACPI_FAILURE(status)) { /* On error, table_ptr was deallocated above */ -- cgit v0.10.2 From d52c79ace60a2e2b22455fd195ff4bc8e7afa177 Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:26:57 +0800 Subject: ACPICA: Fix to make _SST method optional Fixes a problem introduced in 20080514 where the status of execution of _SST is incorrectly returned to the caller. _SST is optional, and if it is AE_NOT_FOUND, the exception should be ignored. http://www.acpica.org/bugzilla/show_bug.cgi?id=716 Signed-off-by: Bob Moore Signed-off-by: Lin Ming Signed-off-by: Len Brown diff --git a/drivers/acpi/hardware/hwsleep.c b/drivers/acpi/hardware/hwsleep.c index d9937e0..dba3cfb 100644 --- a/drivers/acpi/hardware/hwsleep.c +++ b/drivers/acpi/hardware/hwsleep.c @@ -223,15 +223,17 @@ acpi_status acpi_enter_sleep_state_prep(u8 sleep_state) break; } - /* Set the system indicators to show the desired sleep state. */ - + /* + * Set the system indicators to show the desired sleep state. + * _SST is an optional method (return no error if not found) + */ status = acpi_evaluate_object(NULL, METHOD_NAME__SST, &arg_list, NULL); if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) { ACPI_EXCEPTION((AE_INFO, status, "While executing method _SST")); } - return_ACPI_STATUS(status); + return_ACPI_STATUS(AE_OK); } ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep) -- cgit v0.10.2 From 8410565f540db87ca938f56f92780d251e4f157d Mon Sep 17 00:00:00 2001 From: Bob Moore Date: Tue, 10 Jun 2008 14:29:26 +0800 Subject: ACPICA: Fix for access to deleted object Fixes problem introduced in 20080123, with fix for Unload operator. Parse tree object can be already deleted; must use the opcode within the WalkState. ACPI: kmemcheck: Caught 16-bit read from freed memory http://bugzilla.kernel.org/show_bug.cgi?id=10669 Signed-off-by: Lin Ming Signed-off-by: Bob Moore Signed-off-by: Len Brown diff --git a/drivers/acpi/parser/psargs.c b/drivers/acpi/parser/psargs.c index f1e8bf6..e944637 100644 --- a/drivers/acpi/parser/psargs.c +++ b/drivers/acpi/parser/psargs.c @@ -268,7 +268,7 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state, */ if (ACPI_SUCCESS(status) && possible_method_call && (node->type == ACPI_TYPE_METHOD)) { - if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) { + if (walk_state->opcode == AML_UNLOAD_OP) { /* * acpi_ps_get_next_namestring has increased the AML pointer, * so we need to restore the saved AML pointer for method call. @@ -691,7 +691,7 @@ acpi_ps_get_next_arg(struct acpi_walk_state *walk_state, /* To support super_name arg of Unload */ - if (walk_state->op->common.aml_opcode == AML_UNLOAD_OP) { + if (walk_state->opcode == AML_UNLOAD_OP) { status = acpi_ps_get_next_namepath(walk_state, parser_state, arg, -- cgit v0.10.2 From a39a2d7c72b358c6253a2ec28e17b023b7f6f41c Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 19 May 2008 15:55:15 -0700 Subject: ACPI: Reject below-freezing temperatures as invalid critical temperatures My laptop thinks that it's a good idea to give -73C as the critical CPU temperature.... which isn't the best thing since it causes a shutdown right at bootup. Temperatures below freezing are clearly invalid critical thresholds so just reject these as such. Signed-off-by: Arjan van de Ven Acked-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 504385b..84c795f 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -364,10 +364,17 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) if (flag & ACPI_TRIPS_CRITICAL) { status = acpi_evaluate_integer(tz->device->handle, "_CRT", NULL, &tz->trips.critical.temperature); - if (ACPI_FAILURE(status)) { + /* + * Treat freezing temperatures as invalid as well; some + * BIOSes return really low values and cause reboots at startup. + * Below zero (Celcius) values clearly aren't right for sure.. + * ... so lets discard those as invalid. + */ + if (ACPI_FAILURE(status) || + tz->trips.critical.temperature <= 2732) { tz->trips.critical.flags.valid = 0; ACPI_EXCEPTION((AE_INFO, status, - "No critical threshold")); + "No or invalid critical threshold")); return -ENODEV; } else { tz->trips.critical.flags.valid = 1; -- cgit v0.10.2 From 3549dba2c334e82df90f5e00ff85d2a7a2cdd1af Mon Sep 17 00:00:00 2001 From: Len Brown Date: Fri, 6 Jun 2008 15:32:39 -0400 Subject: ACPICA: fix stray va_end() caused by mis-merge Signed-off-by: Len Brown diff --git a/drivers/acpi/utilities/utmisc.c b/drivers/acpi/utilities/utmisc.c index e4ba719..1f057b7 100644 --- a/drivers/acpi/utilities/utmisc.c +++ b/drivers/acpi/utilities/utmisc.c @@ -1048,6 +1048,7 @@ acpi_ut_exception(char *module_name, va_start(args, format); acpi_os_vprintf(format, args); acpi_os_printf(" [%X]\n", ACPI_CA_VERSION); + va_end(args); } EXPORT_SYMBOL(acpi_ut_exception); @@ -1063,7 +1064,6 @@ acpi_ut_warning(char *module_name, u32 line_number, char *format, ...) acpi_os_vprintf(format, args); acpi_os_printf(" [%X]\n", ACPI_CA_VERSION); va_end(args); - va_end(args); } void ACPI_INTERNAL_VAR_XFACE -- cgit v0.10.2 From 3463a93def55c309f3c0d0a8aaf216be3be42d64 Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Wed, 11 Jun 2008 17:29:27 -0600 Subject: [IA64] Update check_sal_cache_flush to use platform_send_ipi() check_sal_cache_flush is used to detect broken firmware that drops pending interrupts. The old implementation schedules a timer interrupt for itself in the future by getting the current value of the Interval Timer Counter + 1000 cycles, waits for the interrupt to be pended, calls SAL_CACHE_FLUSH, and finally checks to see if the interrupt is still pending. This implementation can cause problems for virtual machine code if the process of scheduling the timer interrupt takes more than 1000 cycles; the virtual machine can end up sleeping for several hundred years while waiting for the ITC to wrap around. The fix is to use platform_send_ipi. The processor will still send an interrupt to itself, using the IA64_IPI_DM_INT delivery mode, which causes the IPI to look like an external interrupt. The rest of the SAL_CACHE_FLUSH + checking to see if the interrupt is still pending remains unchanged. This fix has been boot tested successfully on: - intel tiger2 - hp rx6600 - hp rx5670 The rx5670 has known buggy firmware, where SAL_CACHE_FLUSH drops pending interrupts. A boot test on this machine showed this message on the console: SAL: SAL_CACHE_FLUSH drops interrupts; PAL_CACHE_FLUSH will be used instead Which proves that the self-inflicted IPI approach is viable. And as expected, the other tested platforms correctly did not display the warning. Signed-off-by: Alex Chiang Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/sal.c b/arch/ia64/kernel/sal.c index 7e02597..0464173 100644 --- a/arch/ia64/kernel/sal.c +++ b/arch/ia64/kernel/sal.c @@ -252,11 +252,10 @@ check_sal_cache_flush (void) local_irq_save(flags); /* - * Schedule a timer interrupt, wait until it's reported, and see if - * SAL_CACHE_FLUSH drops it. + * Send ourselves a timer interrupt, wait until it's reported, and see + * if SAL_CACHE_FLUSH drops it. */ - ia64_set_itv(IA64_TIMER_VECTOR); - ia64_set_itm(ia64_get_itc() + 1000); + platform_send_ipi(cpu, IA64_TIMER_VECTOR, IA64_IPI_DM_INT, 0); while (!ia64_get_irr(IA64_TIMER_VECTOR)) cpu_relax(); -- cgit v0.10.2 From 4623236619ff5ce233136d13ee2747c194a63591 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 4 Jun 2008 21:40:43 -0700 Subject: dev_set_name: fix missing kernel-doc Fix kernel-doc for new dev_set_name() function: Warning(lin2626-rc5//drivers/base/core.c:767): No description found for parameter 'fmt' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/base/core.c b/drivers/base/core.c index 422cfca..ee0a51a 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -762,6 +762,7 @@ static void device_remove_class_symlinks(struct device *dev) /** * dev_set_name - set a device name * @dev: device + * @fmt: format string for the device's name */ int dev_set_name(struct device *dev, const char *fmt, ...) { -- cgit v0.10.2 From acccafe9ca63eac3a202d8805d286ada6ab8cced Mon Sep 17 00:00:00 2001 From: David Brigada Date: Wed, 11 Jun 2008 13:27:32 -0400 Subject: kobject: Documentation Spelling Patch Signed-off-by: David Brigada Signed-off-by: Greg Kroah-Hartman diff --git a/Documentation/kobject.txt b/Documentation/kobject.txt index bf3256e..51a8021 100644 --- a/Documentation/kobject.txt +++ b/Documentation/kobject.txt @@ -305,7 +305,7 @@ should not be manipulated by any other user. A kset keeps its children in a standard kernel linked list. Kobjects point back to their containing kset via their kset field. In almost all cases, -the kobjects belonging to a ket have that kset (or, strictly, its embedded +the kobjects belonging to a kset have that kset (or, strictly, its embedded kobject) in their parent. As a kset contains a kobject within it, it should always be dynamically -- cgit v0.10.2 From 6460a261b5893e769a314c246faec31bbc4aad9c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 2 Jun 2008 21:21:03 +0200 Subject: USB: fix build bug in USB_ISIGHTFW USB: fix build bug in USB_ISIGHTFW -tip tree testing found this build bug: drivers/built-in.o: In function `isight_firmware_load': isight_firmware.c:(.text+0x1ade08): undefined reference to `request_firmware' isight_firmware.c:(.text+0x1adf9c): undefined reference to `release_firmware' select FW_LOADER in USB_ISIGHTFW. From: Ingo Molnar Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index eb6c069..001789c 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -272,6 +272,7 @@ config USB_TEST config USB_ISIGHTFW tristate "iSight firmware loading support" depends on USB + select FW_LOADER help This driver loads firmware for USB Apple iSight cameras, allowing them to be driven by the USB video class driver available at -- cgit v0.10.2 From 62b5884875fcd4babf6c0c377046f226abbfe491 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Fri, 6 Jun 2008 12:35:15 -0700 Subject: isight_firmware: Avoid crash on loading invalid firmware Different tools generate slightly different formats of the isight firmware. Ensure that the firmware buffer is not overrun, while still ensuring that the correct amount of data is written if trailing data is present. Signed-off-by: Matthew Garrett Report-by: Justin Mattock Tested-by: Justin Mattock Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/isight_firmware.c b/drivers/usb/misc/isight_firmware.c index 390e048..9f30aa1 100644 --- a/drivers/usb/misc/isight_firmware.c +++ b/drivers/usb/misc/isight_firmware.c @@ -39,9 +39,12 @@ static int isight_firmware_load(struct usb_interface *intf, struct usb_device *dev = interface_to_usbdev(intf); int llen, len, req, ret = 0; const struct firmware *firmware; - unsigned char *buf; + unsigned char *buf = kmalloc(50, GFP_KERNEL); unsigned char data[4]; - char *ptr; + u8 *ptr; + + if (!buf) + return -ENOMEM; if (request_firmware(&firmware, "isight.fw", &dev->dev) != 0) { printk(KERN_ERR "Unable to load isight firmware\n"); @@ -59,7 +62,7 @@ static int isight_firmware_load(struct usb_interface *intf, goto out; } - while (1) { + while (ptr+4 <= firmware->data+firmware->size) { memcpy(data, ptr, 4); len = (data[0] << 8 | data[1]); req = (data[2] << 8 | data[3]); @@ -71,10 +74,14 @@ static int isight_firmware_load(struct usb_interface *intf, continue; for (; len > 0; req += 50) { - llen = len > 50 ? 50 : len; + llen = min(len, 50); len -= llen; - - buf = kmalloc(llen, GFP_KERNEL); + if (ptr+llen > firmware->data+firmware->size) { + printk(KERN_ERR + "Malformed isight firmware"); + ret = -ENODEV; + goto out; + } memcpy(buf, ptr, llen); ptr += llen; @@ -89,16 +96,18 @@ static int isight_firmware_load(struct usb_interface *intf, goto out; } - kfree(buf); } } + if (usb_control_msg (dev, usb_sndctrlpipe(dev, 0), 0xa0, 0x40, 0xe600, 0, "\0", 1, 300) != 1) { printk(KERN_ERR "isight firmware loading completion failed\n"); ret = -ENODEV; } + out: + kfree(buf); release_firmware(firmware); return ret; } -- cgit v0.10.2 From e6942d633be61f1638e08c56ab8244fc9f1c61e3 Mon Sep 17 00:00:00 2001 From: Nate Case Date: Wed, 21 May 2008 16:28:20 -0500 Subject: USB: isp1760: Assign resource fields before adding hcd This fixes the bogus "io mem 0x00000000" message printed during driver init due to hcd->rsrc_start being assigned after the call to usb_add_hcd(). Signed-off-by: Nate Case Acked-by: Sebastian Siewior Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index c9cec87..65aa5ec 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -2207,14 +2207,14 @@ struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq, goto err_put; } - ret = usb_add_hcd(hcd, irq, irqflags); - if (ret) - goto err_unmap; - hcd->irq = irq; hcd->rsrc_start = res_start; hcd->rsrc_len = res_len; + ret = usb_add_hcd(hcd, irq, irqflags); + if (ret) + goto err_unmap; + return hcd; err_unmap: -- cgit v0.10.2 From 5340ba827b6269ccd2dcfd3d966626d9dd75d5d4 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 10 Jun 2008 14:59:43 -0400 Subject: USB: don't use reset-resume if drivers don't support it This patch tries to identify which devices are able to accept reset-resume handling, by checking that there is at least one interface driver bound and that all of the drivers have a reset_resume method defined. If these conditions don't hold then during resume processing, the device is logicall disconnected. This is only a temporary fix. Later on we will explicitly unbind drivers that can't handle reset-resumes. Signed-off-by: Linus Torvalds Signed-off-by: Alan Stern Cc: Oliver Neukum Cc: Pavel Machek Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 8eb4da3..94789be 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -644,6 +644,48 @@ static void hub_stop(struct usb_hub *hub) #ifdef CONFIG_PM +/* Try to identify which devices need USB-PERSIST handling */ +static int persistent_device(struct usb_device *udev) +{ + int i; + int retval; + struct usb_host_config *actconfig; + + /* Explicitly not marked persistent? */ + if (!udev->persist_enabled) + return 0; + + /* No active config? */ + actconfig = udev->actconfig; + if (!actconfig) + return 0; + + /* FIXME! We should check whether it's open here or not! */ + + /* + * Check that all the interface drivers have a + * 'reset_resume' entrypoint + */ + retval = 0; + for (i = 0; i < actconfig->desc.bNumInterfaces; i++) { + struct usb_interface *intf; + struct usb_driver *driver; + + intf = actconfig->interface[i]; + if (!intf->dev.driver) + continue; + driver = to_usb_driver(intf->dev.driver); + if (!driver->reset_resume) + return 0; + /* + * We have at least one driver, and that one + * has a reset_resume method. + */ + retval = 1; + } + return retval; +} + static void hub_restart(struct usb_hub *hub, int type) { struct usb_device *hdev = hub->hdev; @@ -689,8 +731,8 @@ static void hub_restart(struct usb_hub *hub, int type) * turn off the various status changes to prevent * khubd from disconnecting it later. */ - if (udev->persist_enabled && status == 0 && - !(portstatus & USB_PORT_STAT_ENABLE)) { + if (status == 0 && !(portstatus & USB_PORT_STAT_ENABLE) && + persistent_device(udev)) { if (portchange & USB_PORT_STAT_C_ENABLE) clear_port_feature(hub->hdev, port1, USB_PORT_FEAT_C_ENABLE); -- cgit v0.10.2 From 20c61fbd8deb2ada0ac3acecf6156a986dbfff2d Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 28 Apr 2008 14:40:55 +0900 Subject: ipv6 mcast: Check address family of gf_group in getsockopt(MS_FILTER). Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 26b83e5..ce794d6 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -874,6 +874,8 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, return -EINVAL; if (copy_from_user(&gsf, optval, GROUP_FILTER_SIZE(0))) return -EFAULT; + if (gsf.gf_group.ss_family != AF_INET6) + return -EADDRNOTAVAIL; lock_sock(sk); err = ip6_mc_msfget(sk, &gsf, (struct group_filter __user *)optval, optlen); -- cgit v0.10.2 From 36e3deae8ba84865fd9eb3f2f21bbc00d49b7544 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Tue, 13 May 2008 02:52:55 +0900 Subject: ipv6 route: Fix route lifetime in netlink message. 1) We may have route lifetime larger than INT_MAX. In that case we had wired value in lifetime. Use INT_MAX if lifetime does not fit in s32. 2) Lifetime is valid iif RTF_EXPIRES is set. Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 220cffe..d1f3e19 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -2196,8 +2196,12 @@ static int rt6_fill_node(struct sk_buff *skb, struct rt6_info *rt, NLA_PUT_U32(skb, RTA_PRIORITY, rt->rt6i_metric); - expires = (rt->rt6i_flags & RTF_EXPIRES) ? - rt->rt6i_expires - jiffies : 0; + if (!(rt->rt6i_flags & RTF_EXPIRES)) + expires = 0; + else if (rt->rt6i_expires - jiffies < INT_MAX) + expires = rt->rt6i_expires - jiffies; + else + expires = INT_MAX; if (rtnl_put_cacheinfo(skb, &rt->u.dst, 0, 0, 0, expires, rt->u.dst.error) < 0) -- cgit v0.10.2 From e8766fc86b34d44a8c55a2f9d71da69e091b1ca4 Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Tue, 10 Jun 2008 15:50:55 +0800 Subject: ipv6: Check the hop limit setting in ancillary data. When specifing the outgoing hop limit as ancillary data for sendmsg(), the kernel doesn't check the integer hop limit value as specified in [RFC-3542] section 6.3. Signed-off-by: Shan Wei Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index b9c2de8..0f0f94a 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -705,6 +705,11 @@ int datagram_send_ctl(struct net *net, } *hlimit = *(int *)CMSG_DATA(cmsg); + if (*hlimit < -1 || *hlimit > 0xff) { + err = -EINVAL; + goto exit_f; + } + break; case IPV6_TCLASS: -- cgit v0.10.2 From 28d4488216645cd71402925cffde9528b0cfdb7e Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 12 Jun 2008 03:14:51 +0900 Subject: ipv6: Check IPV6_MULTICAST_LOOP option value. Only 0 and 1 are valid for IPV6_MULTICAST_LOOP socket option, and we should return an error of EINVAL otherwise, per RFC3493. Based on patch from Shan Wei . Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index ce794d6..9a36971 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -458,6 +458,8 @@ done: case IPV6_MULTICAST_LOOP: if (optlen < sizeof(int)) goto e_inval; + if (val != valbool) + goto e_inval; np->mc_loop = valbool; retv = 0; break; -- cgit v0.10.2 From 1717699cd5130009b7cd6756e883d8582c1fe706 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 12 Jun 2008 03:27:26 +0900 Subject: ipv6: Fail with appropriate error code when setting not-applicable sockopt. IPV6_MULTICAST_HOPS, for example, is not valid for stream sockets. Since they are virtually unavailable for stream sockets, we should return ENOPROTOOPT instead of EINVAL. Signed-off-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 9a36971..c042ce1 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -67,7 +67,7 @@ int ip6_ra_control(struct sock *sk, int sel, void (*destructor)(struct sock *)) /* RA packet may be delivered ONLY to IPPROTO_RAW socket */ if (sk->sk_type != SOCK_RAW || inet_sk(sk)->num != IPPROTO_RAW) - return -EINVAL; + return -ENOPROTOOPT; new_ra = (sel>=0) ? kmalloc(sizeof(*new_ra), GFP_KERNEL) : NULL; @@ -446,7 +446,7 @@ done: case IPV6_MULTICAST_HOPS: if (sk->sk_type == SOCK_STREAM) - goto e_inval; + break; if (optlen < sizeof(int)) goto e_inval; if (val > 255 || val < -1) @@ -466,7 +466,7 @@ done: case IPV6_MULTICAST_IF: if (sk->sk_type == SOCK_STREAM) - goto e_inval; + break; if (optlen < sizeof(int)) goto e_inval; @@ -862,7 +862,7 @@ static int do_ipv6_getsockopt(struct sock *sk, int level, int optname, if (sk->sk_protocol != IPPROTO_UDP && sk->sk_protocol != IPPROTO_UDPLITE && sk->sk_protocol != IPPROTO_TCP) - return -EINVAL; + return -ENOPROTOOPT; if (sk->sk_state != TCP_ESTABLISHED) return -ENOTCONN; val = sk->sk_family; -- cgit v0.10.2 From b66985b11b8b00e1ec65b89a3112510ac9a9ec6e Mon Sep 17 00:00:00 2001 From: Eric Leblond Date: Wed, 11 Jun 2008 17:50:27 -0700 Subject: netfilter: Make nflog quiet when no one listen in userspace. The message "nf_log_packet: can't log since no backend logging module loaded in! Please either load one, or disable logging explicitly" was displayed for each logged packet when no userspace application is listening to nflog events. The message seems to warn for a problem with a kernel module missing but as said before this is not the case. I thus propose to suppress the message (I don't see any reason to flood the log because a user application has crashed.) Signed-off-by: Eric Leblond Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_log.c b/net/netfilter/nf_log.c index bc11d70..9fda6ee 100644 --- a/net/netfilter/nf_log.c +++ b/net/netfilter/nf_log.c @@ -92,10 +92,6 @@ void nf_log_packet(int pf, vsnprintf(prefix, sizeof(prefix), fmt, args); va_end(args); logger->logfn(pf, hooknum, skb, in, out, loginfo, prefix); - } else if (net_ratelimit()) { - printk(KERN_WARNING "nf_log_packet: can\'t log since " - "no backend logging module loaded in! Please either " - "load one, or disable logging explicitly\n"); } rcu_read_unlock(); } -- cgit v0.10.2 From ceeff7541e5a4ba8e8d97ffbae32b3f283cb7a3f Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 11 Jun 2008 17:51:10 -0700 Subject: netfilter: nf_conntrack: fix ctnetlink related crash in nf_nat_setup_info() When creation of a new conntrack entry in ctnetlink fails after having set up the NAT mappings, the conntrack has an extension area allocated that is not getting properly destroyed when freeing the conntrack again. This means the NAT extension is still in the bysource hash, causing a crash when walking over the hash chain the next time: BUG: unable to handle kernel paging request at 00120fbd IP: [] nf_nat_setup_info+0x221/0x58a *pde = 00000000 Oops: 0000 [#1] PREEMPT SMP Pid: 2795, comm: conntrackd Not tainted (2.6.26-rc5 #1) EIP: 0060:[] EFLAGS: 00010206 CPU: 1 EIP is at nf_nat_setup_info+0x221/0x58a EAX: 00120fbd EBX: 00120fbd ECX: 00000001 EDX: 00000000 ESI: 0000019e EDI: e853bbb4 EBP: e853bbc8 ESP: e853bb78 DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process conntrackd (pid: 2795, ti=e853a000 task=f7de10f0 task.ti=e853a000) Stack: 00000000 e853bc2c e85672ec 00000008 c0561084 63c1db4a 00000000 00000000 00000000 0002e109 61d2b1c3 00000000 00000000 00000000 01114e22 61d2b1c3 00000000 00000000 f7444674 e853bc04 00000008 c038e728 0000000a f7444674 Call Trace: [] nla_parse+0x5c/0xb0 [] ctnetlink_change_status+0x190/0x1c6 [] ctnetlink_new_conntrack+0x189/0x61f [] update_curr+0x3d/0x52 [] nfnetlink_rcv_msg+0xc1/0xd8 [] nfnetlink_rcv_msg+0x18/0xd8 [] nfnetlink_rcv_msg+0x0/0xd8 [] netlink_rcv_skb+0x2d/0x71 [] nfnetlink_rcv+0x19/0x24 [] netlink_unicast+0x1b3/0x216 ... Move invocation of the extension destructors to nf_conntrack_free() to fix this problem. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=10875 Reported-and-Tested-by: Krzysztof Piotr Oledzki Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c index c4b1799..662c1cc 100644 --- a/net/netfilter/nf_conntrack_core.c +++ b/net/netfilter/nf_conntrack_core.c @@ -196,8 +196,6 @@ destroy_conntrack(struct nf_conntrack *nfct) if (l4proto && l4proto->destroy) l4proto->destroy(ct); - nf_ct_ext_destroy(ct); - rcu_read_unlock(); spin_lock_bh(&nf_conntrack_lock); @@ -520,6 +518,7 @@ static void nf_conntrack_free_rcu(struct rcu_head *head) void nf_conntrack_free(struct nf_conn *ct) { + nf_ct_ext_destroy(ct); call_rcu(&ct->rcu, nf_conntrack_free_rcu); } EXPORT_SYMBOL_GPL(nf_conntrack_free); -- cgit v0.10.2 From 0761248f08ccd94ddceb5454eb1ad96626b10611 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 9 Jun 2008 16:33:50 -0700 Subject: ipg: fix receivemode IPG_RM_RECEIVEMULTICAST{,HASH} in ipg_nic_set_multicast_list() The branches are dead code. even when dev->flag IFF_MULTICAST (defined 0x1000) is set, dev->flags & IFF_MULTICAST & [boolean] always evaluates to 0. Signed-off-by: Roel Kluin Cc: Francois Romieu Cc: Jeff Garzik Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 9b358f6..679a082 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -577,12 +577,12 @@ static void ipg_nic_set_multicast_list(struct net_device *dev) /* NIC to be configured in promiscuous mode. */ receivemode = IPG_RM_RECEIVEALLFRAMES; } else if ((dev->flags & IFF_ALLMULTI) || - (dev->flags & IFF_MULTICAST & + ((dev->flags & IFF_MULTICAST) && (dev->mc_count > IPG_MULTICAST_HASHTABLE_SIZE))) { /* NIC to be configured to receive all multicast * frames. */ receivemode |= IPG_RM_RECEIVEMULTICAST; - } else if (dev->flags & IFF_MULTICAST & (dev->mc_count > 0)) { + } else if ((dev->flags & IFF_MULTICAST) && (dev->mc_count > 0)) { /* NIC to be configured to receive selected * multicast addresses. */ receivemode |= IPG_RM_RECEIVEMULTICASTHASH; -- cgit v0.10.2 From 8b9835108f68938a5f7e74fd2c0fc65da2abad92 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Mon, 9 Jun 2008 16:33:51 -0700 Subject: fec_mpc52xx: MPC52xx_MESSAGES_DEFAULT: 2nd NETIF_MSG_IFDOWN => IFUP Duplicate NETIF_MSG_IFDOWN, 2nd should be NETIF_MSG_IFUP Signed-off-by: Roel Kluin Acked-by: Sylvain Munaut Cc: Grant Likely Signed-off-by: Andrew Morton Signed-off-by: Jeff Garzik diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c index 5f9c42e..329edd9 100644 --- a/drivers/net/fec_mpc52xx.c +++ b/drivers/net/fec_mpc52xx.c @@ -78,7 +78,7 @@ module_param_array_named(mac, mpc52xx_fec_mac_addr, byte, NULL, 0); MODULE_PARM_DESC(mac, "six hex digits, ie. 0x1,0x2,0xc0,0x01,0xba,0xbe"); #define MPC52xx_MESSAGES_DEFAULT ( NETIF_MSG_DRV | NETIF_MSG_PROBE | \ - NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFDOWN ) + NETIF_MSG_LINK | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP) static int debug = -1; /* the above default */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "debugging messages level"); -- cgit v0.10.2 From 208aefa2451cc1f4d87622cb9b2ca4333afa8337 Mon Sep 17 00:00:00 2001 From: Christophe Jaillet Date: Thu, 15 May 2008 23:26:22 +0200 Subject: drivers/net/r6040.c: correct bad use of round_jiffies() Compared to other places in the kernel, I think that this driver misuses the function round_jiffies. Signed-off-by: Christophe Jaillet Signed-off-by: Jeff Garzik diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 169edc1..858b191 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -733,7 +733,7 @@ static void r6040_timer(unsigned long data) } /* Timer active again */ - mod_timer(&lp->timer, jiffies + round_jiffies(HZ)); + mod_timer(&lp->timer, round_jiffies(jiffies + HZ)); } /* Read/set MAC address routines */ -- cgit v0.10.2 From 45aec1ae72fc592f231e9e73ed9ed4d10cfbc0b5 Mon Sep 17 00:00:00 2001 From: "venkatesh.pallipadi@intel.com" Date: Tue, 18 Mar 2008 17:00:22 -0700 Subject: x86: PAT export resource_wc in pci sysfs For the ranges with IORESOURCE_PREFETCH, export a new resource_wc interface in pci /sysfs along with resource (which is uncached). Signed-off-by: Venkatesh Pallipadi Signed-off-by: Suresh Siddha Acked-by: Jesse Barnes Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/Documentation/filesystems/sysfs-pci.txt b/Documentation/filesystems/sysfs-pci.txt index 5daa2aa..68ef488 100644 --- a/Documentation/filesystems/sysfs-pci.txt +++ b/Documentation/filesystems/sysfs-pci.txt @@ -36,6 +36,7 @@ files, each with their own function. local_cpus nearby CPU mask (cpumask, ro) resource PCI resource host addresses (ascii, ro) resource0..N PCI resource N, if present (binary, mmap) + resource0_wc..N_wc PCI WC map resource N, if prefetchable (binary, mmap) rom PCI ROM resource, if present (binary, ro) subsystem_device PCI subsystem device (ascii, ro) subsystem_vendor PCI subsystem vendor (ascii, ro) diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 271d41c..9ec7d39 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -489,13 +489,14 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @kobj: kobject for mapping * @attr: struct bin_attribute for the file being mapped * @vma: struct vm_area_struct passed into the mmap + * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, - struct vm_area_struct *vma) + struct vm_area_struct *vma, int write_combine) { struct pci_dev *pdev = to_pci_dev(container_of(kobj, struct device, kobj)); @@ -518,7 +519,21 @@ pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, vma->vm_pgoff += start >> PAGE_SHIFT; mmap_type = res->flags & IORESOURCE_MEM ? pci_mmap_mem : pci_mmap_io; - return pci_mmap_page_range(pdev, vma, mmap_type, 0); + return pci_mmap_page_range(pdev, vma, mmap_type, write_combine); +} + +static int +pci_mmap_resource_uc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 0); +} + +static int +pci_mmap_resource_wc(struct kobject *kobj, struct bin_attribute *attr, + struct vm_area_struct *vma) +{ + return pci_mmap_resource(kobj, attr, vma, 1); } /** @@ -541,9 +556,46 @@ pci_remove_resource_files(struct pci_dev *pdev) sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); kfree(res_attr); } + + res_attr = pdev->res_attr_wc[i]; + if (res_attr) { + sysfs_remove_bin_file(&pdev->dev.kobj, res_attr); + kfree(res_attr); + } } } +static int pci_create_attr(struct pci_dev *pdev, int num, int write_combine) +{ + /* allocate attribute structure, piggyback attribute name */ + int name_len = write_combine ? 13 : 10; + struct bin_attribute *res_attr; + int retval; + + res_attr = kzalloc(sizeof(*res_attr) + name_len, GFP_ATOMIC); + if (res_attr) { + char *res_attr_name = (char *)(res_attr + 1); + + if (write_combine) { + pdev->res_attr_wc[num] = res_attr; + sprintf(res_attr_name, "resource%d_wc", num); + res_attr->mmap = pci_mmap_resource_wc; + } else { + pdev->res_attr[num] = res_attr; + sprintf(res_attr_name, "resource%d", num); + res_attr->mmap = pci_mmap_resource_uc; + } + res_attr->attr.name = res_attr_name; + res_attr->attr.mode = S_IRUSR | S_IWUSR; + res_attr->size = pci_resource_len(pdev, num); + res_attr->private = &pdev->resource[num]; + retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); + } else + retval = -ENOMEM; + + return retval; +} + /** * pci_create_resource_files - create resource files in sysfs for @dev * @dev: dev in question @@ -557,31 +609,19 @@ static int pci_create_resource_files(struct pci_dev *pdev) /* Expose the PCI resources from this device as files */ for (i = 0; i < PCI_ROM_RESOURCE; i++) { - struct bin_attribute *res_attr; /* skip empty resources */ if (!pci_resource_len(pdev, i)) continue; - /* allocate attribute structure, piggyback attribute name */ - res_attr = kzalloc(sizeof(*res_attr) + 10, GFP_ATOMIC); - if (res_attr) { - char *res_attr_name = (char *)(res_attr + 1); - - pdev->res_attr[i] = res_attr; - sprintf(res_attr_name, "resource%d", i); - res_attr->attr.name = res_attr_name; - res_attr->attr.mode = S_IRUSR | S_IWUSR; - res_attr->size = pci_resource_len(pdev, i); - res_attr->mmap = pci_mmap_resource; - res_attr->private = &pdev->resource[i]; - retval = sysfs_create_bin_file(&pdev->dev.kobj, res_attr); - if (retval) { - pci_remove_resource_files(pdev); - return retval; - } - } else { - return -ENOMEM; + retval = pci_create_attr(pdev, i, 0); + /* for prefetchable resources, create a WC mappable file */ + if (!retval && pdev->resource[i].flags & IORESOURCE_PREFETCH) + retval = pci_create_attr(pdev, i, 1); + + if (retval) { + pci_remove_resource_files(pdev); + return retval; } } return 0; diff --git a/include/linux/pci.h b/include/linux/pci.h index 509159b..d18b1dd 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -206,6 +206,7 @@ struct pci_dev { struct bin_attribute *rom_attr; /* attribute descriptor for sysfs ROM entry */ int rom_attr_enabled; /* has display of the rom attribute been enabled? */ struct bin_attribute *res_attr[DEVICE_COUNT_RESOURCE]; /* sysfs file for resources */ + struct bin_attribute *res_attr_wc[DEVICE_COUNT_RESOURCE]; /* sysfs file for WC mapping of resources */ #ifdef CONFIG_PCI_MSI struct list_head msi_list; #endif -- cgit v0.10.2 From f595ec964daf7f99668039d7303ddedd09a75142 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 12 Jun 2008 10:47:56 +0200 Subject: common implementation of iterative div/mod We have a few instances of the open-coded iterative div/mod loop, used when we don't expcet the dividend to be much bigger than the divisor. Unfortunately modern gcc's have the tendency to strength "reduce" this into a full mod operation, which isn't necessarily any faster, and even if it were, doesn't exist if gcc implements it in libgcc. The workaround is to put a dummy asm statement in the loop to prevent gcc from performing the transformation. This patch creates a single implementation of this loop, and uses it to replace the open-coded versions I know about. Signed-off-by: Jeremy Fitzhardinge Cc: Andrew Morton Cc: john stultz Cc: Segher Boessenkool Cc: Christian Kujau Cc: Robert Hancock Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index c39e1a5..52b2e38 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -12,6 +12,7 @@ #include #include #include +#include #include #include @@ -150,11 +151,7 @@ static void do_stolen_accounting(void) if (stolen < 0) stolen = 0; - ticks = 0; - while (stolen >= NS_PER_TICK) { - ticks++; - stolen -= NS_PER_TICK; - } + ticks = iter_div_u64_rem(stolen, NS_PER_TICK, &stolen); __get_cpu_var(residual_stolen) = stolen; account_steal_time(NULL, ticks); @@ -166,11 +163,7 @@ static void do_stolen_accounting(void) if (blocked < 0) blocked = 0; - ticks = 0; - while (blocked >= NS_PER_TICK) { - ticks++; - blocked -= NS_PER_TICK; - } + ticks = iter_div_u64_rem(blocked, NS_PER_TICK, &blocked); __get_cpu_var(residual_blocked) = blocked; account_steal_time(idle_task(smp_processor_id()), ticks); } diff --git a/include/linux/math64.h b/include/linux/math64.h index c1a5f81..177785e 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -81,4 +81,6 @@ static inline s64 div_s64(s64 dividend, s32 divisor) } #endif +u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder); + #endif /* _LINUX_MATH64_H */ diff --git a/include/linux/time.h b/include/linux/time.h index d32ef0a..05f9517 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -6,6 +6,7 @@ #ifdef __KERNEL__ # include # include +# include #endif #ifndef _STRUCT_TIMESPEC @@ -172,15 +173,7 @@ extern struct timeval ns_to_timeval(const s64 nsec); */ static inline void timespec_add_ns(struct timespec *a, u64 ns) { - ns += a->tv_nsec; - while(unlikely(ns >= NSEC_PER_SEC)) { - /* The following asm() prevents the compiler from - * optimising this loop into a modulo operation. */ - asm("" : "+r"(ns)); - - ns -= NSEC_PER_SEC; - a->tv_sec++; - } + a->tv_sec += iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } #endif /* __KERNEL__ */ diff --git a/lib/div64.c b/lib/div64.c index bb5bd0c..76c0154 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -98,3 +98,26 @@ EXPORT_SYMBOL(div64_u64); #endif #endif /* BITS_PER_LONG == 32 */ + +/* + * Iterative div/mod for use when dividend is not expected to be much + * bigger than divisor. + */ +u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + u32 ret = 0; + + while (dividend >= divisor) { + /* The following asm() prevents the compiler from + optimising this loop into a modulo operation. */ + asm("" : "+rm"(dividend)); + + dividend -= divisor; + ret++; + } + + *remainder = dividend; + + return ret; +} +EXPORT_SYMBOL(iter_div_u64_rem); -- cgit v0.10.2 From d5e181f78ac753893eb930868a52a4488cd3de0a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 12 Jun 2008 10:47:58 +0200 Subject: add an inlined version of iter_div_u64_rem iter_div_u64_rem is used in the x86-64 vdso, which cannot call other kernel code. For this case, provide the always_inlined version, __iter_div_u64_rem. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar diff --git a/include/linux/math64.h b/include/linux/math64.h index 177785e..c87f152 100644 --- a/include/linux/math64.h +++ b/include/linux/math64.h @@ -83,4 +83,23 @@ static inline s64 div_s64(s64 dividend, s32 divisor) u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder); +static __always_inline u32 +__iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) +{ + u32 ret = 0; + + while (dividend >= divisor) { + /* The following asm() prevents the compiler from + optimising this loop into a modulo operation. */ + asm("" : "+rm"(dividend)); + + dividend -= divisor; + ret++; + } + + *remainder = dividend; + + return ret; +} + #endif /* _LINUX_MATH64_H */ diff --git a/lib/div64.c b/lib/div64.c index 76c0154..a111eb8 100644 --- a/lib/div64.c +++ b/lib/div64.c @@ -105,19 +105,6 @@ EXPORT_SYMBOL(div64_u64); */ u32 iter_div_u64_rem(u64 dividend, u32 divisor, u64 *remainder) { - u32 ret = 0; - - while (dividend >= divisor) { - /* The following asm() prevents the compiler from - optimising this loop into a modulo operation. */ - asm("" : "+rm"(dividend)); - - dividend -= divisor; - ret++; - } - - *remainder = dividend; - - return ret; + return __iter_div_u64_rem(dividend, divisor, remainder); } EXPORT_SYMBOL(iter_div_u64_rem); -- cgit v0.10.2 From 9412e28649d0272df5e4af57bb378926fd4df580 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 12 Jun 2008 10:48:00 +0200 Subject: always_inline timespec_add_ns timespec_add_ns is used from the x86-64 vdso, which cannot call out to other kernel code. Make sure that timespec_add_ns is always inlined (and only uses always_inlined functions) to make sure there are no unexpected calls. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar diff --git a/include/linux/time.h b/include/linux/time.h index 05f9517..e15206a 100644 --- a/include/linux/time.h +++ b/include/linux/time.h @@ -170,10 +170,13 @@ extern struct timeval ns_to_timeval(const s64 nsec); * timespec_add_ns - Adds nanoseconds to a timespec * @a: pointer to timespec to be incremented * @ns: unsigned nanoseconds value to be added + * + * This must always be inlined because its used from the x86-64 vdso, + * which cannot call other kernel functions. */ -static inline void timespec_add_ns(struct timespec *a, u64 ns) +static __always_inline void timespec_add_ns(struct timespec *a, u64 ns) { - a->tv_sec += iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); + a->tv_sec += __iter_div_u64_rem(a->tv_nsec + ns, NSEC_PER_SEC, &ns); a->tv_nsec = ns; } #endif /* __KERNEL__ */ -- cgit v0.10.2 From 4bb073c0e32a0862bdb5215d11af19f6c0180c98 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 12 Jun 2008 02:22:02 -0700 Subject: net: Eliminate flush_scheduled_work() calls while RTNL is held. If the RTNL is held when we invoke flush_scheduled_work() we could deadlock. One such case is linkwatch, it is a work struct which tries to grab the RTNL semaphore. The most common case are net driver ->stop() methods. The simplest conversion is to instead use cancel_{delayed_}work_sync() explicitly on the various work struct the driver uses. This is an OK transformation because these work structs are doing things like resetting the chip, restarting link negotiation, and so forth. And if we're bringing down the device, we're about to turn the chip off and reset it anways. So if we cancel a pending work event, that's fine here. Some drivers were working around this deadlock by using a msleep() polling loop of some sort, and those cases are converted to instead use cancel_{delayed_}work_sync() as well. Signed-off-by: David S. Miller diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c index 4b46e68..367b6d4 100644 --- a/drivers/net/bnx2.c +++ b/drivers/net/bnx2.c @@ -5724,14 +5724,12 @@ bnx2_reset_task(struct work_struct *work) if (!netif_running(bp->dev)) return; - bp->in_reset_task = 1; bnx2_netif_stop(bp); bnx2_init_nic(bp); atomic_set(&bp->intr_sem, 1); bnx2_netif_start(bp); - bp->in_reset_task = 0; } static void @@ -5907,12 +5905,7 @@ bnx2_close(struct net_device *dev) struct bnx2 *bp = netdev_priv(dev); u32 reset_code; - /* Calling flush_scheduled_work() may deadlock because - * linkwatch_event() may be on the workqueue and it will try to get - * the rtnl_lock which we are holding. - */ - while (bp->in_reset_task) - msleep(1); + cancel_work_sync(&bp->reset_task); bnx2_disable_int_sync(bp); bnx2_napi_disable(bp); diff --git a/drivers/net/bnx2.h b/drivers/net/bnx2.h index 1eaf5bb..2377cc1 100644 --- a/drivers/net/bnx2.h +++ b/drivers/net/bnx2.h @@ -6656,7 +6656,6 @@ struct bnx2 { int current_interval; struct timer_list timer; struct work_struct reset_task; - int in_reset_task; /* Used to synchronize phy accesses. */ spinlock_t phy_lock; diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index faae01d..075fd54 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -2605,7 +2605,8 @@ static int ehea_stop(struct net_device *dev) if (netif_msg_ifdown(port)) ehea_info("disabling port %s", dev->name); - flush_scheduled_work(); + cancel_work_sync(&port->reset_task); + mutex_lock(&port->port_lock); netif_stop_queue(dev); port_napi_disable(port); diff --git a/drivers/net/hamradio/baycom_epp.c b/drivers/net/hamradio/baycom_epp.c index dde9c7e..00bc7fb 100644 --- a/drivers/net/hamradio/baycom_epp.c +++ b/drivers/net/hamradio/baycom_epp.c @@ -959,7 +959,7 @@ static int epp_close(struct net_device *dev) unsigned char tmp[1]; bc->work_running = 0; - flush_scheduled_work(); + cancel_delayed_work_sync(&bc->run_work); bc->stat = EPP_DCDBIT; tmp[0] = 0; pp->ops->epp_write_addr(pp, tmp, 1, 0); diff --git a/drivers/net/smc911x.c b/drivers/net/smc911x.c index 4e28002..e2ee91a 100644 --- a/drivers/net/smc911x.c +++ b/drivers/net/smc911x.c @@ -136,7 +136,6 @@ struct smc911x_local { /* work queue */ struct work_struct phy_configure; - int work_pending; int tx_throttle; spinlock_t lock; @@ -960,11 +959,11 @@ static void smc911x_phy_configure(struct work_struct *work) * We should not be called if phy_type is zero. */ if (lp->phy_type == 0) - goto smc911x_phy_configure_exit_nolock; + return; if (smc911x_phy_reset(dev, phyaddr)) { printk("%s: PHY reset timed out\n", dev->name); - goto smc911x_phy_configure_exit_nolock; + return; } spin_lock_irqsave(&lp->lock, flags); @@ -1033,8 +1032,6 @@ static void smc911x_phy_configure(struct work_struct *work) smc911x_phy_configure_exit: spin_unlock_irqrestore(&lp->lock, flags); -smc911x_phy_configure_exit_nolock: - lp->work_pending = 0; } /* @@ -1356,11 +1353,8 @@ static void smc911x_timeout(struct net_device *dev) * smc911x_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; @@ -1531,16 +1525,8 @@ static int smc911x_close(struct net_device *dev) if (lp->phy_type != 0) { /* We need to ensure that no calls to * smc911x_phy_configure are pending. - - * flush_scheduled_work() cannot be called because we - * are running with the netlink semaphore held (from - * devinet_ioctl()) and the pending work queue - * contains linkwatch_event() (scheduled by - * netif_carrier_off() above). linkwatch_event() also - * wants the netlink semaphore. */ - while (lp->work_pending) - schedule(); + cancel_work_sync(&lp->phy_configure); smc911x_phy_powerdown(dev, lp->mii.phy_id); } diff --git a/drivers/net/smc91x.c b/drivers/net/smc91x.c index a188e33..f2051b2 100644 --- a/drivers/net/smc91x.c +++ b/drivers/net/smc91x.c @@ -1016,15 +1016,8 @@ static void smc_phy_powerdown(struct net_device *dev) /* We need to ensure that no calls to smc_phy_configure are pending. - - flush_scheduled_work() cannot be called because we are - running with the netlink semaphore held (from - devinet_ioctl()) and the pending work queue contains - linkwatch_event() (scheduled by netif_carrier_off() - above). linkwatch_event() also wants the netlink semaphore. */ - while(lp->work_pending) - yield(); + cancel_work_sync(&lp->phy_configure); bmcr = smc_phy_read(dev, phy, MII_BMCR); smc_phy_write(dev, phy, MII_BMCR, bmcr | BMCR_PDOWN); @@ -1161,7 +1154,6 @@ static void smc_phy_configure(struct work_struct *work) smc_phy_configure_exit: SMC_SELECT_BANK(lp, 2); spin_unlock_irq(&lp->lock); - lp->work_pending = 0; } /* @@ -1389,11 +1381,8 @@ static void smc_timeout(struct net_device *dev) * smc_phy_configure() calls msleep() which calls schedule_timeout() * which calls schedule(). Hence we use a work queue. */ - if (lp->phy_type != 0) { - if (schedule_work(&lp->phy_configure)) { - lp->work_pending = 1; - } - } + if (lp->phy_type != 0) + schedule_work(&lp->phy_configure); /* We can accept TX packets again */ dev->trans_start = jiffies; diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 55670b5..af8d2c4 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -731,7 +731,7 @@ static void tulip_down (struct net_device *dev) void __iomem *ioaddr = tp->base_addr; unsigned long flags; - flush_scheduled_work(); + cancel_work_sync(&tp->media_work); #ifdef CONFIG_TULIP_NAPI napi_disable(&tp->napi); diff --git a/drivers/net/usb/kaweth.c b/drivers/net/usb/kaweth.c index 0dcfc03..7c66b05 100644 --- a/drivers/net/usb/kaweth.c +++ b/drivers/net/usb/kaweth.c @@ -706,7 +706,7 @@ static void kaweth_kill_urbs(struct kaweth_device *kaweth) usb_kill_urb(kaweth->rx_urb); usb_kill_urb(kaweth->tx_urb); - flush_scheduled_work(); + cancel_delayed_work_sync(&kaweth->lowmem_work); /* a scheduled work may have resubmitted, we hit them again */ diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index 20d387f..f7aec93 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -682,7 +682,13 @@ static int prism2_close(struct net_device *dev) netif_device_detach(dev); } - flush_scheduled_work(); + cancel_work_sync(&local->reset_queue); + cancel_work_sync(&local->set_multicast_list_queue); + cancel_work_sync(&local->set_tim_queue); +#ifndef PRISM2_NO_STATION_MODES + cancel_work_sync(&local->info_queue); +#endif + cancel_work_sync(&local->comms_qual_update); module_put(local->hw_module); -- cgit v0.10.2 From 2e084786f6fe052274f1dfa7c675fe4a02cacd6e Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 12 Jun 2008 16:42:58 +0800 Subject: sched: fair group: fix overflow(was: fix divide by zero) I found a bug which can be reproduced by this way:(linux-2.6.26-rc5, x86-64) (use 2^32, 2^33, ...., 2^63 as shares value) # mkdir /dev/cpuctl # mount -t cgroup -o cpu cpuctl /dev/cpuctl # cd /dev/cpuctl # mkdir sub # echo 0x8000000000000000 > sub/cpu.shares # echo $$ > sub/tasks oops here! divide by zero. This is because do_div() expects the 2th parameter to be 32 bits, but unsigned long is 64 bits in x86_64. Peter Zijstra pointed it out that the sane thing to do is limit the shares value to something smaller instead of using an even more expensive divide. Also, I found another bug about "the shares value is too large": pid1 and pid2 are set affinity to cpu#0 pid1 is attached to cg1 and pid2 is attached to cg2 if cg1/cpu.shares = 1024 cg2/cpu.shares = 2000000000 then pid2 got 100% usage of cpu, and pid1 0% if cg1/cpu.shares = 1024 cg2/cpu.shares = 20000000000 then pid2 got 0% usage of cpu, and pid1 100% And a weight of a cfs_rq is the sum of weights of which entities are queued on this cfs_rq, so the shares value should be limited to a smaller value. I think that (1UL << 18) is a good limited value: 1) it's not too large, we can create a lot of group before overflow 2) it's several times the weight value for nice=-19 (not too small) Signed-off-by: Lai Jiangshan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 2c65bf2..6c1ecbd 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -312,12 +312,15 @@ static DEFINE_SPINLOCK(task_group_lock); #endif /* - * A weight of 0, 1 or ULONG_MAX can cause arithmetics problems. + * A weight of 0 or 1 can cause arithmetics problems. + * A weight of a cfs_rq is the sum of weights of which entities + * are queued on this cfs_rq, so a weight of a entity should not be + * too large, so as the shares value of a task group. * (The default weight is 1024 - so there's no practical * limitation from this.) */ #define MIN_SHARES 2 -#define MAX_SHARES (ULONG_MAX - 1) +#define MAX_SHARES (1UL << 18) static int init_task_group_load = INIT_TASK_GROUP_LOAD; #endif -- cgit v0.10.2 From 7a232e0350940d2664f4de5cc3f0f443bae5062d Mon Sep 17 00:00:00 2001 From: Lai Jiangshan Date: Thu, 12 Jun 2008 16:43:07 +0800 Subject: sched: 64-bit: fix arithmetics overflow (overflow means weight >= 2^32 here, because inv_weigh = 2^32/weight) A weight of a cfs_rq is the sum of weights of which entities are queued on this cfs_rq, so it will overflow when there are too many entities. Although, overflow occurs very rarely, but it break fairness when it occurs. 64-bits systems have more memory than 32-bit systems and 64-bit systems can create more process usually, so overflow may occur more frequently. This patch guarantees fairness when overflow happens on 64-bit systems. Thanks to the optimization of compiler, it changes nothing on 32-bit. Signed-off-by: Lai Jiangshan Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 6c1ecbd..eaf6751 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1340,8 +1340,13 @@ calc_delta_mine(unsigned long delta_exec, unsigned long weight, { u64 tmp; - if (!lw->inv_weight) - lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2)/(lw->weight+1); + if (!lw->inv_weight) { + if (BITS_PER_LONG > 32 && unlikely(lw->weight >= WMULT_CONST)) + lw->inv_weight = 1; + else + lw->inv_weight = 1 + (WMULT_CONST-lw->weight/2) + / (lw->weight+1); + } tmp = (u64)delta_exec * weight; /* -- cgit v0.10.2 From 4d7365d664e79710ac0e782a23443471ddf05bdd Mon Sep 17 00:00:00 2001 From: Sam Ravnborg Date: Thu, 12 Jun 2008 15:02:55 +0200 Subject: kbuild: ignore powerpc specific symbols in modpost Kumar Gala wrote: We have a case in powerpc in which we want to link some library routines with all module objects. The routines are intended for handling out-of-line function call register save/restore so having them as EXPORT_SYMBOL() is counter productive (we do also need to link the same "library" code into the kernel). Without this patch a powerpc build would error out and fail to build modules with the added register save/restore module. There were two obvious solutions: 1) To link the .o file before the modpost stage 2) To ignore the symbols in modpost Option 1) was ruled out because we do not have any separate linking stage for single file modules. This patch implements option 2 - and do so only for powerpc. The symbols we ignore are all undefined symbols named: _restgpr_*, _savegpr_*, _rest32gpr_*, _save32gpr_* Signed-off-by: Sam Ravnborg Cc: Kumar Gala Cc: Paul Mackerras diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 508c589..a07f91a 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -467,6 +467,25 @@ static void parse_elf_finish(struct elf_info *info) release_file(info->hdr, info->size); } +static int ignore_undef_symbol(struct elf_info *info, const char *symname) +{ + /* ignore __this_module, it will be resolved shortly */ + if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0) + return 1; + /* ignore global offset table */ + if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0) + return 1; + if (info->hdr->e_machine == EM_PPC) + /* Special register function linked on all modules during final link of .ko */ + if (strncmp(symname, "_restgpr_", sizeof("_restgpr_") - 1) == 0 || + strncmp(symname, "_savegpr_", sizeof("_savegpr_") - 1) == 0 || + strncmp(symname, "_rest32gpr_", sizeof("_rest32gpr_") - 1) == 0 || + strncmp(symname, "_save32gpr_", sizeof("_save32gpr_") - 1) == 0) + return 1; + /* Do not ignore this symbol */ + return 0; +} + #define CRC_PFX MODULE_SYMBOL_PREFIX "__crc_" #define KSYMTAB_PFX MODULE_SYMBOL_PREFIX "__ksymtab_" @@ -493,11 +512,7 @@ static void handle_modversions(struct module *mod, struct elf_info *info, if (ELF_ST_BIND(sym->st_info) != STB_GLOBAL && ELF_ST_BIND(sym->st_info) != STB_WEAK) break; - /* ignore global offset table */ - if (strcmp(symname, "_GLOBAL_OFFSET_TABLE_") == 0) - break; - /* ignore __this_module, it will be resolved shortly */ - if (strcmp(symname, MODULE_SYMBOL_PREFIX "__this_module") == 0) + if (ignore_undef_symbol(info, symname)) break; /* cope with newer glibc (2.3.4 or higher) STT_ definition in elf.h */ #if defined(STT_REGISTER) || defined(STT_SPARC_REGISTER) -- cgit v0.10.2 From f969c5672b16b857e5231ad3c78f08d8ef3305aa Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Thu, 12 Jun 2008 02:05:26 -0400 Subject: fsl-diu-db: compile fix This patch fixes a compile failure in 2.6.26-rc5-git5. The variable is expected to be called ofdev. Signed-off-by: Jeff Mahoney Signed-off-by: Linus Torvalds diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index b50bb03..0a27853 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -1320,7 +1320,7 @@ static void free_irq_local(int irq) * Power management hooks. Note that we won't be called from IRQ context, * unlike the blank functions above, so we may sleep. */ -static int fsl_diu_suspend(struct of_device *dev, pm_message_t state) +static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state) { struct fsl_diu_data *machine_data; @@ -1330,7 +1330,7 @@ static int fsl_diu_suspend(struct of_device *dev, pm_message_t state) return 0; } -static int fsl_diu_resume(struct of_device *dev) +static int fsl_diu_resume(struct of_device *ofdev) { struct fsl_diu_data *machine_data; -- cgit v0.10.2 From 5a1603be58f11edb1b30cb1e40cfbdd4439289d0 Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Thu, 12 Jun 2008 16:29:55 +0900 Subject: nommu: Correct kobjsize() page validity checks. This implements a few changes on top of the recent kobjsize() refactoring introduced by commit 6cfd53fc03670c7a544a56d441eb1a6cc800d72b. As Christoph points out: virt_to_head_page cannot return NULL. virt_to_page also does not return NULL. pfn_valid() needs to be used to figure out if a page is valid. Otherwise the page struct reference that was returned may have PageReserved() set to indicate that it is not a valid page. As discussed further in the thread, virt_addr_valid() is the preferable way to validate the object pointer in this case. In addition to fixing up the reserved page case, it also has the benefit of encapsulating the hack introduced by commit 4016a1390d07f15b267eecb20e76a48fd5c524ef on the impacted platforms, allowing us to get rid of the extra checking in kobjsize() for the platforms that don't perform this type of bizarre memory_end abuse (every nommu platform that isn't blackfin). If blackfin decides to get in line with every other platform and use PageReserved for the DMA pages in question, kobjsize() will also continue to work fine. It also turns out that compound_order() will give us back 0-order for non-head pages, so we can get rid of the PageCompound check and just use compound_order() directly. Clean that up while we're at it. Signed-off-by: Paul Mundt Reviewed-by: Christoph Lameter Acked-by: David Howells Signed-off-by: Linus Torvalds diff --git a/mm/nommu.c b/mm/nommu.c index 3abd084..4462b6a 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -104,21 +104,15 @@ EXPORT_SYMBOL(vmtruncate); unsigned int kobjsize(const void *objp) { struct page *page; - int order = 0; /* * If the object we have should not have ksize performed on it, * return size of 0 */ - if (!objp) - return 0; - - if ((unsigned long)objp >= memory_end) + if (!objp || !virt_addr_valid(objp)) return 0; page = virt_to_head_page(objp); - if (!page) - return 0; /* * If the allocator sets PageSlab, we know the pointer came from @@ -129,18 +123,9 @@ unsigned int kobjsize(const void *objp) /* * The ksize() function is only guaranteed to work for pointers - * returned by kmalloc(). So handle arbitrary pointers, that we expect - * always to be compound pages, here. - */ - if (PageCompound(page)) - order = compound_order(page); - - /* - * Finally, handle arbitrary pointers that don't set PageSlab. - * Default to 0-order in the case when we're unable to ksize() - * the object. + * returned by kmalloc(). So handle arbitrary pointers here. */ - return PAGE_SIZE << order; + return PAGE_SIZE << compound_order(page); } /* -- cgit v0.10.2 From 14a73f54798f39854e521fb596da7d50b7566bbd Mon Sep 17 00:00:00 2001 From: Carl Henrik Lunde Date: Thu, 12 Jun 2008 20:13:58 +0200 Subject: block: disable IRQs until data is written to relay channel As we may run relay_reserve from interrupt context we must always disable IRQs. This is because a call to relay_reserve may expose previously written data to use space. Updated new message code and an old but related comment. Signed-off-by: Carl Henrik Lunde Signed-off-by: Jens Axboe Signed-off-by: Linus Torvalds diff --git a/block/blktrace.c b/block/blktrace.c index 7ae87cc..8d3a277 100644 --- a/block/blktrace.c +++ b/block/blktrace.c @@ -79,16 +79,17 @@ void __trace_note_message(struct blk_trace *bt, const char *fmt, ...) { int n; va_list args; + unsigned long flags; char *buf; - preempt_disable(); + local_irq_save(flags); buf = per_cpu_ptr(bt->msg_data, smp_processor_id()); va_start(args, fmt); n = vscnprintf(buf, BLK_TN_MAX_MSG, fmt, args); va_end(args); trace_note(bt, 0, BLK_TN_MESSAGE, buf, n); - preempt_enable(); + local_irq_restore(flags); } EXPORT_SYMBOL_GPL(__trace_note_message); @@ -158,10 +159,7 @@ void __blk_add_trace(struct blk_trace *bt, sector_t sector, int bytes, /* * A word about the locking here - we disable interrupts to reserve * some space in the relay per-cpu buffer, to prevent an irq - * from coming in and stepping on our toes. Once reserved, it's - * enough to get preemption disabled to prevent read of this data - * before we are through filling it. get_cpu()/put_cpu() does this - * for us + * from coming in and stepping on our toes. */ local_irq_save(flags); -- cgit v0.10.2 From 3703f39965a197ebd91743fc38d0f640606b8da3 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Wed, 4 Jun 2008 18:13:37 +0200 Subject: geode: fix modular build -tip testing found this build bug: MODPOST 331 modules ERROR: "geode_mfgpt_toggle_event" [drivers/watchdog/geodewdt.ko] undefined! ERROR: "geode_mfgpt_alloc_timer" [drivers/watchdog/geodewdt.ko] undefined! make[1]: *** [__modpost] Error 1 make: *** [modules] Error 2 with this config: http://redhat.com/~mingo/misc/config-Wed_Jun__4_18_01_59_CEST_2008.bad export those symbols. Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 3cad17f..07c0f82 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -155,6 +155,7 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) wrmsr(msr, value, dummy); return 0; } +EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event); int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) { @@ -222,6 +223,7 @@ int geode_mfgpt_alloc_timer(int timer, int domain) /* No timers available - too bad */ return -1; } +EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer); #ifdef CONFIG_GEODE_MFGPT_TIMER -- cgit v0.10.2 From b29c701deacd5d24453127c37ed77ef851c53b8b Mon Sep 17 00:00:00 2001 From: Henry Nestler Date: Mon, 12 May 2008 15:44:39 +0200 Subject: x86: fix endless page faults in mount_block_root for Linux 2.6 Page faults in kernel address space between PAGE_OFFSET up to VMALLOC_START should not try to map as vmalloc. Fix rarely endless page faults inside mount_block_root for root filesystem at boot time. All 32bit kernels up to 2.6.25 can fail into this hole. I can not present this under native linux kernel. I see, that the 64bit has fixed the problem. I copied the same lines into 32bit part. Recorded debugs are from coLinux kernel 2.6.22.18 (virtualisation): http://www.henrynestler.com/colinux/testing/pfn-check-0.7.3/20080410-antinx/bug16-recursive-page-fault-endless.txt The physicaly memory was trimmed down to 192MB to better catch the bug. More memory gets the bug more rarely. Details, how every x86 32bit system can fail: Start from "mount_block_root", http://lxr.linux.no/linux/init/do_mounts.c#L297 There the variable "fs_names" got one memory page with 4096 bytes. Variable "p" walks through the existing file system types. The first string is no problem. But, with the second loop in mount_block_root the offset of "p" is not at beginning of page, the offset is for example +9, if "reiserfs" is the first in list. Than calls do_mount_root, and lands in sys_mount. Remember: Variable "type_page" contains now "fs_type+9" and not contains a full page. The sys_mount copies 4096 bytes with function "exact_copy_from_user()": http://lxr.linux.no/linux/fs/namespace.c#L1540 Mostly exist pages after the buffer "fs_names+4096+9" and the page fault handler was not called. No problem. In the case, if the page after "fs_names+4096" is not mapped, the page fault handler was called from http://lxr.linux.no/linux/fs/namespace.c#L1320 The do_page_fault gots an address 0xc03b4000. It's kernel address, address >= TASK_SIZE, but not from vmalloc! It's from "__getname()" alias "kmem_cache_alloc". The "error_code" is 0. "vmalloc_fault" will be call: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L332 "vmalloc_fault" tryed to find the physical page for a non existing virtual memory area. The macro "pte_present" in vmalloc_fault() got a next page fault for 0xc0000ed0 at: http://lxr.linux.no/linux/arch/i386/mm/fault.c#L282 No PTE exist for such virtual address. The page fault handler was trying to sync the physical page for the PTE lockup. This called vmalloc_fault() again for address 0xc000000, and that also was not existing. The endless began... In normal case the cpu would still loop with disabled interrrupts. Under coLinux this was catched by a stack overflow inside printk debugs. Signed-off-by: Henry Nestler Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index fd7e179..8bcb6f4 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -497,6 +497,11 @@ static int vmalloc_fault(unsigned long address) unsigned long pgd_paddr; pmd_t *pmd_k; pte_t *pte_k; + + /* Make sure we are in vmalloc area */ + if (!(address >= VMALLOC_START && address < VMALLOC_END)) + return -1; + /* * Synchronize this task's top level page-table * with the 'reference' page table. -- cgit v0.10.2 From 86b2b70e156203149c3861455feec54bc4906e6d Mon Sep 17 00:00:00 2001 From: Joe Korty Date: Mon, 2 Jun 2008 17:21:06 -0400 Subject: x86: fix asm warning in head_32.S On Mon, May 19, 2008 at 04:10:02PM -0700, Linus Torvalds wrote: > It also causes these warnings on 32-bit PAE: > > AS arch/x86/kernel/head_32.o > arch/x86/kernel/head_32.S: Assembler messages: > arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed > arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed > > and I do not see why (the end result seems to be identical). Fix head_32.S gcc bignum warnings when CONFIG_PAE=y. arch/x86/kernel/head_32.S: Assembler messages: arch/x86/kernel/head_32.S:225: Warning: left operand is a bignum; integer 0 assumed arch/x86/kernel/head_32.S:609: Warning: left operand is a bignum; integer 0 assumed The assembler was stumbling over the 64-bit constant 0x100000000 in the KPMDS #define. Testing: a cmp(1) on head_32.o before and after shows the binary is unchanged. Signed-off-by: Joe Korty Cc: Theodore Tso Cc: Gabriel C Cc: Keith Packard Cc: "Pallipadi Venkatesh" Cc: Eric Anholt Cc: "Siddha Suresh B" Cc: bugme-daemon@bugzilla.kernel.org Cc: airlied@linux.ie Cc: "Barnes Jesse" Cc: Jeremy Fitzhardinge Cc: Andrew Morton Cc: "Rafael J. Wysocki" Cc: Linus Torvalds Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index b2cc737..f7357cc 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -189,7 +189,7 @@ default_entry: * this stage. */ -#define KPMDS ((0x100000000-__PAGE_OFFSET) >> 30) /* Number of kernel PMDs */ +#define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */ xorl %ebx,%ebx /* %ebx is kept at zero */ -- cgit v0.10.2 From 0b6a39f7ebcb1c82587ce35b401c513eed41ac5c Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 9 Jun 2008 13:29:43 +0200 Subject: Revert "x86: fix ioapic bug again" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit 6e908947b4995bc0e551a8257c586d5c3e428201. NĂ©meth MĂ¡rton reported: | there is a problem in 2.6.26-rc3 which was not there in case of | 2.6.25: the CPU wakes up ~90,000 times per sec instead of ~60 per sec. | | I also "git bisected" the problem, the result is: | | 6e908947b4995bc0e551a8257c586d5c3e428201 is first bad commit | commit 6e908947b4995bc0e551a8257c586d5c3e428201 | Author: Ingo Molnar | Date: Fri Mar 21 14:32:36 2008 +0100 | | x86: fix ioapic bug again the original problem is fixed by Maciej W. Rozycki in the tip/x86/apic branch (confirmed by MĂ¡rton), but those changes are too intrusive for v2.6.26 so we'll go for the less intrusive (repeated) revert now. Reported-and-bisected-by: NĂ©meth MĂ¡rton Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/io_apic_32.c b/arch/x86/kernel/io_apic_32.c index a40d54f..4dc8600d9 100644 --- a/arch/x86/kernel/io_apic_32.c +++ b/arch/x86/kernel/io_apic_32.c @@ -2130,14 +2130,10 @@ static inline void __init check_timer(void) { int apic1, pin1, apic2, pin2; int vector; - unsigned int ver; unsigned long flags; local_irq_save(flags); - ver = apic_read(APIC_LVR); - ver = GET_APIC_VERSION(ver); - /* * get/set the timer IRQ vector: */ @@ -2150,15 +2146,11 @@ static inline void __init check_timer(void) * mode for the 8259A whenever interrupts are routed * through I/O APICs. Also IRQ0 has to be enabled in * the 8259A which implies the virtual wire has to be - * disabled in the local APIC. Finally timer interrupts - * need to be acknowledged manually in the 8259A for - * timer_interrupt() and for the i82489DX when using - * the NMI watchdog. + * disabled in the local APIC. */ apic_write_around(APIC_LVT0, APIC_LVT_MASKED | APIC_DM_EXTINT); init_8259A(1); - timer_ack = !cpu_has_tsc; - timer_ack |= (nmi_watchdog == NMI_IO_APIC && !APIC_INTEGRATED(ver)); + timer_ack = 1; if (timer_over_8254 > 0) enable_8259A_irq(0); diff --git a/arch/x86/kernel/nmi_32.c b/arch/x86/kernel/nmi_32.c index 11b14bb..84160f7 100644 --- a/arch/x86/kernel/nmi_32.c +++ b/arch/x86/kernel/nmi_32.c @@ -26,7 +26,6 @@ #include #include -#include #include "mach_traps.h" @@ -82,7 +81,7 @@ int __init check_nmi_watchdog(void) prev_nmi_count = kmalloc(NR_CPUS * sizeof(int), GFP_KERNEL); if (!prev_nmi_count) - goto error; + return -1; printk(KERN_INFO "Testing NMI watchdog ... "); @@ -119,7 +118,7 @@ int __init check_nmi_watchdog(void) if (!atomic_read(&nmi_active)) { kfree(prev_nmi_count); atomic_set(&nmi_active, -1); - goto error; + return -1; } printk("OK.\n"); @@ -130,10 +129,6 @@ int __init check_nmi_watchdog(void) kfree(prev_nmi_count); return 0; -error: - timer_ack = !cpu_has_tsc; - - return -1; } static int __init setup_nmi_watchdog(char *str) -- cgit v0.10.2 From 52aaa12fbe786c90396f1b11ec39c924ccdd8fd5 Mon Sep 17 00:00:00 2001 From: Manish Katiyar Date: Thu, 5 Jun 2008 19:14:15 +0530 Subject: x86: fix unused variable 'loops' warning in arch/x86/boot/a20.c Following patch fixes the below warning message : arch/x86/boot/a20.c:118: warning: unused variable 'loops' Signed-off-by : Manish Katiyar Signed-off-by: Ingo Molnar diff --git a/arch/x86/boot/a20.c b/arch/x86/boot/a20.c index 90943f8..e01aafd 100644 --- a/arch/x86/boot/a20.c +++ b/arch/x86/boot/a20.c @@ -115,8 +115,6 @@ static void enable_a20_fast(void) int enable_a20(void) { - int loops = A20_ENABLE_LOOPS; - #if defined(CONFIG_X86_ELAN) /* Elan croaks if we try to touch the KBC */ enable_a20_fast(); @@ -128,6 +126,7 @@ int enable_a20(void) enable_a20_kbc(); return 0; #else + int loops = A20_ENABLE_LOOPS; while (loops--) { /* First, check to see if A20 is already enabled (legacy free, etc.) */ -- cgit v0.10.2 From e32e58a96de4ac35a03349db2ab69f263ded958f Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 6 Jun 2008 10:14:08 +0200 Subject: x86: fix lockdep warning during suspend-to-ram Andrew Morton wrote: > I've been seeing the below for a long time during suspend-to-ram on the Vaio. > > > PM: Syncing filesystems ... done. > PM: Preparing system for mem sleep > Freezing user space processes ... <4>------------[ cut here ]------------ > WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x127() > Modules linked in: i915 drm ipw2200 sonypi ipv6 autofs4 hidp l2cap bluetooth sunrpc nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack xt_tcpudp iptable_filter ip_tables x_tables acpi_cpufreq nvram ohci1394 ieee1394 ehci_hcd uhci_hcd sg joydev snd_hda_intel snd_seq_dummy sr_mod snd_seq_oss cdrom snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss ieee80211 pcspkr ieee80211_crypt snd_pcm i2c_i801 snd_timer i2c_core ide_pci_generic piix snd soundcore snd_page_alloc button ext3 jbd ide_disk ide_core [last unloaded: ipw2200] > Pid: 3250, comm: zsh Not tainted 2.6.26-rc5 #1 > [] warn_on_slowpath+0x41/0x6d > [] ? native_sched_clock+0x82/0x96 > [] ? mark_held_locks+0x41/0x5c > [] ? _spin_unlock_irqrestore+0x36/0x58 > [] ? trace_hardirqs_on+0xe6/0x10d > [] ? __lock_acquire+0xae3/0xb2b > [] ? schedule+0x39b/0x3b4 > [] check_flags+0x4c/0x127 > [] lock_acquire+0x3a/0x86 > [] _spin_lock+0x26/0x53 > [] ? refrigerator+0x13/0xc3 > [] refrigerator+0x13/0xc3 > [] get_signal_to_deliver+0x3c/0x31e > [] do_notify_resume+0x91/0x6ee > [] ? lock_release_holdtime+0x50/0x56 > [] ? _spin_unlock_irqrestore+0x36/0x58 > [] ? read_chan+0x0/0x58c > [] ? trace_hardirqs_on+0xe6/0x10d > [] ? _spin_unlock_irqrestore+0x42/0x58 > [] ? tty_ldisc_deref+0x5c/0x63 > [] ? tty_read+0x66/0x98 > [] ? audit_syscall_exit+0x2aa/0x2c5 > [] ? do_syscall_trace+0x6b/0x16f > [] work_notifysig+0x13/0x1b > ======================= > ---[ end trace 25b49fe59a25afa5 ]--- > possible reason: unannotated irqs-off. > irq event stamp: 58919 > hardirqs last enabled at (58919): [] syscall_exit_work+0x11/0x26 Joy - I so love entry.S Best I can make of it: syscall_exit_work resume_userspace DISABLE_INTERRUPTS (no TRACE_IRQS_OFF) work_pending work_notifysig do_notify_resume() do_signal() get_signal_to_deliver() try_to_freeze() refrigerator() task_lock() -> check_flags() -> BANG The normal path is: syscall_exit_work resume_userspace DISABLE_INTERRUPTS restore_all TRACE_IRQS_IRET iret No idea why that would not warn.. Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 2a609dc..c778e4f 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -248,6 +248,7 @@ ENTRY(resume_userspace) DISABLE_INTERRUPTS(CLBR_ANY) # make sure we don't miss an interrupt # setting need_resched or sigpending # between sampling and the iret + TRACE_IRQS_OFF movl TI_flags(%ebp), %ecx andl $_TIF_WORK_MASK, %ecx # is there any work to be done on # int/exception return? -- cgit v0.10.2 From eb53e9f3ea859a6d59c37b500593b970aa8562e6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Sat, 7 Jun 2008 17:18:40 +0100 Subject: x86: fix an incompatible pointer type warning on 64-bit compilations Fix an incompatible pointer type warning on x86_64 compilations. early_memtest() is passing a u64* to find_e820_area_size() which is expecting an unsigned long. Change t_start and t_size to unsigned long as those are also 64-bit types on x88_64. Signed-off-by: David Howells Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 156e6d7..998a06e 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - u64 t_start, t_size; + unsigned long t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016llx - %016llx pattern %d", + printk(KERN_CONT "\n %016lx - %016lx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From 4461145ef1be92851c230f858f6b6f457c99670f Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Thu, 12 Jun 2008 08:55:59 +0200 Subject: x86, lockdep: fix "WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x128()" Alessandro Suardi reported: > Recently upgraded my FC6 desktop to Fedora 9; with the > latest nautilus RPM updates my VNC session went nuts > with nautilus pegging the CPU for everything that breathed. > > I now reverted to an earlier nautilus package, but during > the peak CPU period my kernel spat this: > > [314185.623294] ------------[ cut here ]------------ > [314185.623414] WARNING: at kernel/lockdep.c:2658 check_flags+0x4c/0x128() > [314185.623514] Modules linked in: iptable_filter ip_tables x_tables > sunrpc ipv6 fuse snd_via82xx snd_ac97_codec ac97_bus snd_mpu401_uart > snd_rawmidi via686a hwmon parport_pc sg parport uhci_hcd ehci_hcd > [314185.623924] Pid: 12314, comm: nautilus Not tainted 2.6.26-rc5-git2 #4 > [314185.624021] [] warn_on_slowpath+0x41/0x7b > [314185.624021] [] ? do_page_fault+0x2c1/0x5fd > [314185.624021] [] ? up_read+0x16/0x28 > [314185.624021] [] ? do_page_fault+0x2c1/0x5fd > [314185.624021] [] ? __lock_acquire+0xbb4/0xbc3 > [314185.624021] [] check_flags+0x4c/0x128 > [314185.624021] [] lock_acquire+0x31/0x7d > [314185.624021] [] __atomic_notifier_call_chain+0x30/0x80 > [314185.624021] [] ? __atomic_notifier_call_chain+0x0/0x80 > [314185.624021] [] atomic_notifier_call_chain+0xc/0xe > [314185.624021] [] notify_die+0x2d/0x2f > [314185.624021] [] do_int3+0x1f/0x4d > [314185.624021] [] int3+0x27/0x2c > [314185.624021] ======================= > [314185.624021] ---[ end trace 1923f65a2d7bb246 ]--- > [314185.624021] possible reason: unannotated irqs-off. > [314185.624021] irq event stamp: 488879 > [314185.624021] hardirqs last enabled at (488879): [] > restore_nocheck+0x12/0x15 > [314185.624021] hardirqs last disabled at (488878): [] > work_resched+0x19/0x30 > [314185.624021] softirqs last enabled at (488876): [] > __do_softirq+0xa6/0xac > [314185.624021] softirqs last disabled at (488865): [] > do_softirq+0x57/0xa6 > > I didn't seem to find it with some googling, so here it is. > > I was incidentally ltracing that process to try and find out > what was gulping down that much CPU (sorry, no idea > whether ltrace and the WARNING happened at the same > time or which came first) and: Yeah, this is extremely likely to be the source of the warning. The warning should be harmless, however. > Box is my trusty noname K7-800, 512MB RAM; if there's > anything else useful I might be able to provide, just ask. It would be interesting to see where the int3 comes from. Too bad, lockdep doesn't provide the register dump. The stacktrace also doesn't go further than the int3(), I wonder if this int3 came from userspace? The ltrace readme says "software breakpoints, like gdb", so I guess this is the case. Yep, seems like it. This looks relevant: | commit fb1dac909d94ff807cd833d340c6827c3a957159 | Author: Peter Zijlstra | Date: Wed Jan 16 09:51:59 2008 +0100 | | lockdep: more hardirq annotations for notify_die() I'm attaching a similarly-looking patch for this case (DO_VM86_ERROR), though I suspect it might be missing for the other cases (DO_ERROR/DO_ERROR_INFO) as well. Reported-by: Alessandro Suardi Signed-off-by: Vegard Nossum Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/traps_32.c b/arch/x86/kernel/traps_32.c index bde6f63..08d752d 100644 --- a/arch/x86/kernel/traps_32.c +++ b/arch/x86/kernel/traps_32.c @@ -544,6 +544,7 @@ vm86_trap: #define DO_ERROR(trapnr, signr, str, name) \ void do_##name(struct pt_regs *regs, long error_code) \ { \ + trace_hardirqs_fixup(); \ if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \ == NOTIFY_STOP) \ return; \ -- cgit v0.10.2 From f8a45704f5bd5f037c8e4a75172cab1476fc0447 Mon Sep 17 00:00:00 2001 From: Kevin Winchester Date: Thu, 29 May 2008 21:14:35 -0300 Subject: x86: fix pointer type warning in arch/x86/mm/init_64.c:early_memtest Changed the call to find_e820_area_size to pass u64 instead of unsigned long. Signed-off-by: Kevin Winchester Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 998a06e..156e6d7 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - unsigned long t_start, t_size; + u64 t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016lx - %016lx pattern %d", + printk(KERN_CONT "\n %016llx - %016llx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From 3692fd0aaef489b063518b5999c702bada5b6e22 Mon Sep 17 00:00:00 2001 From: Stefan Schmidt Date: Thu, 12 Jun 2008 07:07:22 +0100 Subject: [ARM] 5091/1: Add missing bitfield include to regs-lcd.h Macros like Fld() or FShft used in regs-lcd.h are defined in bitfield.h, but the latter is not included. Also fix one whitespace issue while being there. Signed-off-by: Antonio Ospite Signed-off-by: Stefan Schmidt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/include/asm-arm/arch-pxa/regs-lcd.h b/include/asm-arm/arch-pxa/regs-lcd.h index f762493..3ba464c 100644 --- a/include/asm-arm/arch-pxa/regs-lcd.h +++ b/include/asm-arm/arch-pxa/regs-lcd.h @@ -1,5 +1,8 @@ #ifndef __ASM_ARCH_REGS_LCD_H #define __ASM_ARCH_REGS_LCD_H + +#include + /* * LCD Controller Registers and Bits Definitions */ @@ -69,7 +72,7 @@ #define LCCR0_QDM (1 << 11) /* LCD Quick Disable mask */ #define LCCR0_PDD (0xff << 12) /* Palette DMA request delay */ #define LCCR0_PDD_S 12 -#define LCCR0_BM (1 << 20) /* Branch mask */ +#define LCCR0_BM (1 << 20) /* Branch mask */ #define LCCR0_OUM (1 << 21) /* Output FIFO underrun mask */ #define LCCR0_LCDT (1 << 22) /* LCD panel type */ #define LCCR0_RDSTM (1 << 23) /* Read status interrupt mask */ -- cgit v0.10.2 From 81d5575a48f49f494289a1299a32e4e5e41fbf40 Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Thu, 12 Jun 2008 13:51:46 -0700 Subject: PCI: fixup write combine comment in pci_mmap_resource Now that we can actually do write combining properly, there's no need to have the FIXME. Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 9ec7d39..6f3c744 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -492,7 +492,6 @@ pci_mmap_legacy_mem(struct kobject *kobj, struct bin_attribute *attr, * @write_combine: 1 for write_combine mapping * * Use the regular PCI mapping routines to map a PCI resource into userspace. - * FIXME: write combining? maybe automatic for prefetchable regions? */ static int pci_mmap_resource(struct kobject *kobj, struct bin_attribute *attr, -- cgit v0.10.2 From 5dd34572ad9a3be430632dd42e4af2ea370b397b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 12 Jun 2008 14:22:24 -0700 Subject: Linux 2.6.26-rc6 .. and a new name, courtesy of Alan. diff --git a/Makefile b/Makefile index 2b95120..6923d66 100644 --- a/Makefile +++ b/Makefile @@ -1,8 +1,8 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc5 -NAME = Funky Weasel is Jiggy wit it +EXTRAVERSION = -rc6 +NAME = Rotary Wombat # *DOCUMENTATION* # To see a list of typical targets execute "make help" -- cgit v0.10.2 From 24e3fcefb9cc61acce59ed54c00c4e4c32537de7 Mon Sep 17 00:00:00 2001 From: Eilon Greenstein Date: Thu, 12 Jun 2008 14:30:28 -0700 Subject: bnx2x: Updating the Maintainer I would like to thank Eliezer Tamir for writing and maintaining the driver for the past two years. I will take over maintaining the bnx2x driver from now on. Signed-off-by: Eilon Greenstein Signed-off-by: Eliezer Tamir Signed-off-by: David S. Miller diff --git a/MAINTAINERS b/MAINTAINERS index 46fa179..7c8e561 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -995,8 +995,8 @@ L: netdev@vger.kernel.org S: Supported BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER -P: Eliezer Tamir -M: eliezert@broadcom.com +P: Eilon Greenstein +M: eilong@broadcom.com L: netdev@vger.kernel.org S: Supported diff --git a/drivers/net/bnx2x.c b/drivers/net/bnx2x.c index 7bdb5af..70cba64 100644 --- a/drivers/net/bnx2x.c +++ b/drivers/net/bnx2x.c @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver * UDP CSUM errata workaround by Arik Gendelman * Slowpath rework by Vladislav Zolotarov @@ -74,7 +75,7 @@ static char version[] __devinitdata = "Broadcom NetXtreme II 5771X 10Gigabit Ethernet Driver " DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; -MODULE_AUTHOR("Eliezer Tamir "); +MODULE_AUTHOR("Eliezer Tamir"); MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 4f0c0d3..8e68d06 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir * Based on code from Michael Chan's bnx2 driver */ diff --git a/drivers/net/bnx2x_init.h b/drivers/net/bnx2x_init.h index dcaecc5..370686e 100644 --- a/drivers/net/bnx2x_init.h +++ b/drivers/net/bnx2x_init.h @@ -6,7 +6,8 @@ * it under the terms of the GNU General Public License as published by * the Free Software Foundation. * - * Written by: Eliezer Tamir + * Maintained by: Eilon Greenstein + * Written by: Eliezer Tamir */ #ifndef BNX2X_INIT_H -- cgit v0.10.2 From f23d60de719e639690b2dc5c2d0e4243ff614b7a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 12 Jun 2008 14:47:58 -0700 Subject: ipv6: Fix duplicate initialization of rawv6_prot.destroy In changeset 22dd485022f3d0b162ceb5e67d85de7c3806aa20 ("raw: Raw socket leak.") code was added so that we flush pending frames on raw sockets to avoid leaks. The ipv4 part was fine, but the ipv6 part was not done correctly. Unlike the ipv4 side, the ipv6 code already has a .destroy method for rawv6_prot. So now there were two assignments to this member, and what the compiler does is use the last one, effectively making the ipv6 parts of that changeset a NOP. Fix this by removing the: .destroy = inet6_destroy_sock, line, and adding an inet6_destroy_sock() call to the end of raw6_destroy(). Noticed by Al Viro. Signed-off-by: David S. Miller Acked-by: YOSHIFUJI Hideaki diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 8fee9a1..3aee123 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -1169,7 +1169,8 @@ static int raw6_destroy(struct sock *sk) lock_sock(sk); ip6_flush_pending_frames(sk); release_sock(sk); - return 0; + + return inet6_destroy_sock(sk); } static int rawv6_init_sk(struct sock *sk) @@ -1200,7 +1201,6 @@ struct proto rawv6_prot = { .disconnect = udp_disconnect, .ioctl = rawv6_ioctl, .init = rawv6_init_sk, - .destroy = inet6_destroy_sock, .setsockopt = rawv6_setsockopt, .getsockopt = rawv6_getsockopt, .sendmsg = rawv6_sendmsg, -- cgit v0.10.2 From ec0a196626bd12e0ba108d7daa6d95a4fb25c2c5 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Thu, 12 Jun 2008 16:31:35 -0700 Subject: tcp: Revert 'process defer accept as established' changes. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts two changesets, ec3c0982a2dd1e671bad8e9d26c28dcba0039d87 ("[TCP]: TCP_DEFER_ACCEPT updates - process as established") and the follow-on bug fix 9ae27e0adbf471c7a6b80102e38e1d5a346b3b38 ("tcp: Fix slab corruption with ipv6 and tcp6fuzz"). This change causes several problems, first reported by Ingo Molnar as a distcc-over-loopback regression where connections were getting stuck. Ilpo Järvinen first spotted the locking problems. The new function added by this code, tcp_defer_accept_check(), only has the child socket locked, yet it is modifying state of the parent listening socket. Fixing that is non-trivial at best, because we can't simply just grab the parent listening socket lock at this point, because it would create an ABBA deadlock. The normal ordering is parent listening socket --> child socket, but this code path would require the reverse lock ordering. Next is a problem noticed by Vitaliy Gusev, he noted: ---------------------------------------- >--- a/net/ipv4/tcp_timer.c >+++ b/net/ipv4/tcp_timer.c >@@ -481,6 +481,11 @@ static void tcp_keepalive_timer (unsigned long data) > goto death; > } > >+ if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) { >+ tcp_send_active_reset(sk, GFP_ATOMIC); >+ goto death; Here socket sk is not attached to listening socket's request queue. tcp_done() will not call inet_csk_destroy_sock() (and tcp_v4_destroy_sock() which should release this sk) as socket is not DEAD. Therefore socket sk will be lost for freeing. ---------------------------------------- Finally, Alexey Kuznetsov argues that there might not even be any real value or advantage to these new semantics even if we fix all of the bugs: ---------------------------------------- Hiding from accept() sockets with only out-of-order data only is the only thing which is impossible with old approach. Is this really so valuable? My opinion: no, this is nothing but a new loophole to consume memory without control. ---------------------------------------- So revert this thing for now. Signed-off-by: David S. Miller diff --git a/include/linux/tcp.h b/include/linux/tcp.h index 18e62e3..b31b6b7 100644 --- a/include/linux/tcp.h +++ b/include/linux/tcp.h @@ -239,11 +239,6 @@ static inline struct tcp_request_sock *tcp_rsk(const struct request_sock *req) return (struct tcp_request_sock *)req; } -struct tcp_deferred_accept_info { - struct sock *listen_sk; - struct request_sock *request; -}; - struct tcp_sock { /* inet_connection_sock has to be the first member of tcp_sock */ struct inet_connection_sock inet_conn; @@ -379,8 +374,6 @@ struct tcp_sock { unsigned int keepalive_intvl; /* time interval between keep alive probes */ int linger2; - struct tcp_deferred_accept_info defer_tcp_accept; - unsigned long last_synq_overflow; u32 tso_deferred; diff --git a/include/net/request_sock.h b/include/net/request_sock.h index b220b5f..0c96e7b 100644 --- a/include/net/request_sock.h +++ b/include/net/request_sock.h @@ -115,8 +115,8 @@ struct request_sock_queue { struct request_sock *rskq_accept_head; struct request_sock *rskq_accept_tail; rwlock_t syn_wait_lock; - u16 rskq_defer_accept; - /* 2 bytes hole, try to pack */ + u8 rskq_defer_accept; + /* 3 bytes hole, try to pack */ struct listen_sock *listen_opt; }; diff --git a/include/net/tcp.h b/include/net/tcp.h index d448310..cf54034 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -139,7 +139,6 @@ extern void tcp_time_wait(struct sock *sk, int state, int timeo); #define MAX_TCP_KEEPINTVL 32767 #define MAX_TCP_KEEPCNT 127 #define MAX_TCP_SYNCNT 127 -#define MAX_TCP_ACCEPT_DEFERRED 65535 #define TCP_SYNQ_INTERVAL (HZ/5) /* Period of SYNACK timer */ diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 828ea21..045e799 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -419,7 +419,8 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, struct inet_connection_sock *icsk = inet_csk(parent); struct request_sock_queue *queue = &icsk->icsk_accept_queue; struct listen_sock *lopt = queue->listen_opt; - int thresh = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries; + int max_retries = icsk->icsk_syn_retries ? : sysctl_tcp_synack_retries; + int thresh = max_retries; unsigned long now = jiffies; struct request_sock **reqp, *req; int i, budget; @@ -455,6 +456,9 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, } } + if (queue->rskq_defer_accept) + max_retries = queue->rskq_defer_accept; + budget = 2 * (lopt->nr_table_entries / (timeout / interval)); i = lopt->clock_hand; @@ -462,8 +466,9 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, reqp=&lopt->syn_table[i]; while ((req = *reqp) != NULL) { if (time_after_eq(now, req->expires)) { - if (req->retrans < thresh && - !req->rsk_ops->rtx_syn_ack(parent, req)) { + if ((req->retrans < (inet_rsk(req)->acked ? max_retries : thresh)) && + (inet_rsk(req)->acked || + !req->rsk_ops->rtx_syn_ack(parent, req))) { unsigned long timeo; if (req->retrans++ == 0) diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index ab66683..fc54a48 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -2112,12 +2112,15 @@ static int do_tcp_setsockopt(struct sock *sk, int level, break; case TCP_DEFER_ACCEPT: - if (val < 0) { - err = -EINVAL; - } else { - if (val > MAX_TCP_ACCEPT_DEFERRED) - val = MAX_TCP_ACCEPT_DEFERRED; - icsk->icsk_accept_queue.rskq_defer_accept = val; + icsk->icsk_accept_queue.rskq_defer_accept = 0; + if (val > 0) { + /* Translate value in seconds to number of + * retransmits */ + while (icsk->icsk_accept_queue.rskq_defer_accept < 32 && + val > ((TCP_TIMEOUT_INIT / HZ) << + icsk->icsk_accept_queue.rskq_defer_accept)) + icsk->icsk_accept_queue.rskq_defer_accept++; + icsk->icsk_accept_queue.rskq_defer_accept++; } break; @@ -2299,7 +2302,8 @@ static int do_tcp_getsockopt(struct sock *sk, int level, val = (val ? : sysctl_tcp_fin_timeout) / HZ; break; case TCP_DEFER_ACCEPT: - val = icsk->icsk_accept_queue.rskq_defer_accept; + val = !icsk->icsk_accept_queue.rskq_defer_accept ? 0 : + ((TCP_TIMEOUT_INIT / HZ) << (icsk->icsk_accept_queue.rskq_defer_accept - 1)); break; case TCP_WINDOW_CLAMP: val = tp->window_clamp; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index eba873e9..cad73b7 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -4541,49 +4541,6 @@ static void tcp_urg(struct sock *sk, struct sk_buff *skb, struct tcphdr *th) } } -static int tcp_defer_accept_check(struct sock *sk) -{ - struct tcp_sock *tp = tcp_sk(sk); - - if (tp->defer_tcp_accept.request) { - int queued_data = tp->rcv_nxt - tp->copied_seq; - int hasfin = !skb_queue_empty(&sk->sk_receive_queue) ? - tcp_hdr((struct sk_buff *) - sk->sk_receive_queue.prev)->fin : 0; - - if (queued_data && hasfin) - queued_data--; - - if (queued_data && - tp->defer_tcp_accept.listen_sk->sk_state == TCP_LISTEN) { - if (sock_flag(sk, SOCK_KEEPOPEN)) { - inet_csk_reset_keepalive_timer(sk, - keepalive_time_when(tp)); - } else { - inet_csk_delete_keepalive_timer(sk); - } - - inet_csk_reqsk_queue_add( - tp->defer_tcp_accept.listen_sk, - tp->defer_tcp_accept.request, - sk); - - tp->defer_tcp_accept.listen_sk->sk_data_ready( - tp->defer_tcp_accept.listen_sk, 0); - - sock_put(tp->defer_tcp_accept.listen_sk); - sock_put(sk); - tp->defer_tcp_accept.listen_sk = NULL; - tp->defer_tcp_accept.request = NULL; - } else if (hasfin || - tp->defer_tcp_accept.listen_sk->sk_state != TCP_LISTEN) { - tcp_reset(sk); - return -1; - } - } - return 0; -} - static int tcp_copy_to_iovec(struct sock *sk, struct sk_buff *skb, int hlen) { struct tcp_sock *tp = tcp_sk(sk); @@ -4944,8 +4901,6 @@ step5: tcp_data_snd_check(sk); tcp_ack_snd_check(sk); - - tcp_defer_accept_check(sk); return 0; csum_error: diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 4f8485c..97a2300 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -1918,14 +1918,6 @@ int tcp_v4_destroy_sock(struct sock *sk) sk->sk_sndmsg_page = NULL; } - if (tp->defer_tcp_accept.request) { - reqsk_free(tp->defer_tcp_accept.request); - sock_put(tp->defer_tcp_accept.listen_sk); - sock_put(sk); - tp->defer_tcp_accept.listen_sk = NULL; - tp->defer_tcp_accept.request = NULL; - } - atomic_dec(&tcp_sockets_allocated); return 0; diff --git a/net/ipv4/tcp_minisocks.c b/net/ipv4/tcp_minisocks.c index 019c8c1..8245247 100644 --- a/net/ipv4/tcp_minisocks.c +++ b/net/ipv4/tcp_minisocks.c @@ -571,8 +571,10 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, does sequence test, SYN is truncated, and thus we consider it a bare ACK. - Both ends (listening sockets) accept the new incoming - connection and try to talk to each other. 8-) + If icsk->icsk_accept_queue.rskq_defer_accept, we silently drop this + bare ACK. Otherwise, we create an established connection. Both + ends (listening sockets) accept the new incoming connection and try + to talk to each other. 8-) Note: This case is both harmless, and rare. Possibility is about the same as us discovering intelligent life on another plant tomorrow. @@ -640,6 +642,13 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, if (!(flg & TCP_FLAG_ACK)) return NULL; + /* If TCP_DEFER_ACCEPT is set, drop bare ACK. */ + if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept && + TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) { + inet_rsk(req)->acked = 1; + return NULL; + } + /* OK, ACK is valid, create big socket and * feed this segment to it. It will repeat all * the tests. THIS SEGMENT MUST MOVE SOCKET TO @@ -678,24 +687,7 @@ struct sock *tcp_check_req(struct sock *sk,struct sk_buff *skb, inet_csk_reqsk_queue_unlink(sk, req, prev); inet_csk_reqsk_queue_removed(sk, req); - if (inet_csk(sk)->icsk_accept_queue.rskq_defer_accept && - TCP_SKB_CB(skb)->end_seq == tcp_rsk(req)->rcv_isn + 1) { - - /* the accept queue handling is done is est recv slow - * path so lets make sure to start there - */ - tcp_sk(child)->pred_flags = 0; - sock_hold(sk); - sock_hold(child); - tcp_sk(child)->defer_tcp_accept.listen_sk = sk; - tcp_sk(child)->defer_tcp_accept.request = req; - - inet_csk_reset_keepalive_timer(child, - inet_csk(sk)->icsk_accept_queue.rskq_defer_accept * HZ); - } else { - inet_csk_reqsk_queue_add(sk, req, child); - } - + inet_csk_reqsk_queue_add(sk, req, child); return child; listen_overflow: diff --git a/net/ipv4/tcp_timer.c b/net/ipv4/tcp_timer.c index 4de68cf..63ed9d6 100644 --- a/net/ipv4/tcp_timer.c +++ b/net/ipv4/tcp_timer.c @@ -489,11 +489,6 @@ static void tcp_keepalive_timer (unsigned long data) goto death; } - if (tp->defer_tcp_accept.request && sk->sk_state == TCP_ESTABLISHED) { - tcp_send_active_reset(sk, GFP_ATOMIC); - goto death; - } - if (!sock_flag(sk, SOCK_KEEPOPEN) || sk->sk_state == TCP_CLOSE) goto out; -- cgit v0.10.2 From df0bcab2c66ac876d5e80864fca5cce944a44540 Mon Sep 17 00:00:00 2001 From: Amit Kucheria Date: Thu, 12 Jun 2008 15:21:26 -0700 Subject: agp: add support for Radeon Mobility 9000 chipset Addresses https://bugs.edge.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/178634 Signed-off-by: Amit Kucheria Signed-off-by: maximilian attems Acked-by: Dave Airlie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 55c97f6..07b4d8f 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -458,6 +458,10 @@ static struct agp_device_ids ati_agp_device_ids[] __devinitdata = .chipset_name = "IGP9100/M", }, { + .device_id = PCI_DEVICE_ID_ATI_RS350_133, + .chipset_name = "IGP9000/M", + }, + { .device_id = PCI_DEVICE_ID_ATI_RS350_200, .chipset_name = "IGP9100/M", }, -- cgit v0.10.2 From c700be3d1320d2be4f04c8a5330186b7df724438 Mon Sep 17 00:00:00 2001 From: "kosaki.motohiro@jp.fujitsu.com" Date: Thu, 12 Jun 2008 15:21:27 -0700 Subject: mm: fix incorrect variable type in do_try_to_free_pages() "Smarter retry of costly-order allocations" patch series change behaver of do_try_to_free_pages(). But unfortunately ret variable type was unchanged. Thus an overflow is possible. Signed-off-by: KOSAKI Motohiro Acked-by: Nishanth Aravamudan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 9a29901..967d30c 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -1307,7 +1307,7 @@ static unsigned long do_try_to_free_pages(struct zonelist *zonelist, struct scan_control *sc) { int priority; - int ret = 0; + unsigned long ret = 0; unsigned long total_scanned = 0; unsigned long nr_reclaimed = 0; struct reclaim_state *reclaim_state = current->reclaim_state; -- cgit v0.10.2 From 2d518f84e5ecd1d71df0e6ac5176d212f68c27ce Mon Sep 17 00:00:00 2001 From: OGAWA Hirofumi Date: Thu, 12 Jun 2008 15:21:28 -0700 Subject: fat: relax the permission check of fat_setattr() New chmod() allows only acceptable permission, and if not acceptable, it returns -EPERM. Old one allows even if it can't store permission to on disk inode. But it seems too strict for users. E.g. https://bugzilla.redhat.com/show_bug.cgi?id=449080: With new one, rsync couldn't create the temporary file. So, this patch allows like old one, but now it doesn't change the permission if it can't store, and it returns 0. Also, this patch fixes missing check. Signed-off-by: OGAWA Hirofumi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/fat/file.c b/fs/fat/file.c index 27cc116..771326b 100644 --- a/fs/fat/file.c +++ b/fs/fat/file.c @@ -257,26 +257,34 @@ int fat_getattr(struct vfsmount *mnt, struct dentry *dentry, struct kstat *stat) } EXPORT_SYMBOL_GPL(fat_getattr); -static int fat_check_mode(const struct msdos_sb_info *sbi, struct inode *inode, - mode_t mode) +static int fat_sanitize_mode(const struct msdos_sb_info *sbi, + struct inode *inode, umode_t *mode_ptr) { - mode_t mask, req = mode & ~S_IFMT; + mode_t mask, perm; - if (S_ISREG(mode)) + /* + * Note, the basic check is already done by a caller of + * (attr->ia_mode & ~MSDOS_VALID_MODE) + */ + + if (S_ISREG(inode->i_mode)) mask = sbi->options.fs_fmask; else mask = sbi->options.fs_dmask; + perm = *mode_ptr & ~(S_IFMT | mask); + /* * Of the r and x bits, all (subject to umask) must be present. Of the * w bits, either all (subject to umask) or none must be present. */ - req &= ~mask; - if ((req & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO))) + if ((perm & (S_IRUGO | S_IXUGO)) != (inode->i_mode & (S_IRUGO|S_IXUGO))) return -EPERM; - if ((req & S_IWUGO) && ((req & S_IWUGO) != (S_IWUGO & ~mask))) + if ((perm & S_IWUGO) && ((perm & S_IWUGO) != (S_IWUGO & ~mask))) return -EPERM; + *mode_ptr &= S_IFMT | perm; + return 0; } @@ -299,7 +307,7 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) { struct msdos_sb_info *sbi = MSDOS_SB(dentry->d_sb); struct inode *inode = dentry->d_inode; - int mask, error = 0; + int error = 0; unsigned int ia_valid; lock_kernel(); @@ -332,12 +340,13 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) error = 0; goto out; } + if (((attr->ia_valid & ATTR_UID) && (attr->ia_uid != sbi->options.fs_uid)) || ((attr->ia_valid & ATTR_GID) && (attr->ia_gid != sbi->options.fs_gid)) || ((attr->ia_valid & ATTR_MODE) && - fat_check_mode(sbi, inode, attr->ia_mode) < 0)) + (attr->ia_mode & ~MSDOS_VALID_MODE))) error = -EPERM; if (error) { @@ -346,15 +355,16 @@ int fat_setattr(struct dentry *dentry, struct iattr *attr) goto out; } - error = inode_setattr(inode, attr); - if (error) - goto out; + /* + * We don't return -EPERM here. Yes, strange, but this is too + * old behavior. + */ + if (attr->ia_valid & ATTR_MODE) { + if (fat_sanitize_mode(sbi, inode, &attr->ia_mode) < 0) + attr->ia_valid &= ~ATTR_MODE; + } - if (S_ISDIR(inode->i_mode)) - mask = sbi->options.fs_dmask; - else - mask = sbi->options.fs_fmask; - inode->i_mode &= S_IFMT | (S_IRWXUGO & ~mask); + error = inode_setattr(inode, attr); out: unlock_kernel(); return error; -- cgit v0.10.2 From 69c5ddf58a03da3686691ad2f293bc79fd977c10 Mon Sep 17 00:00:00 2001 From: "Aneesh Kumar K.V" Date: Thu, 12 Jun 2008 15:21:29 -0700 Subject: m68k: Add ext2_find_{first,next}_bit() for ext4 Add ext2_find_{first,next}_bit(), which are needed for ext4. They're derived out of the ext2_find_next_zero_bit found in the same file. Compile tested with crosstools [Reworked to preserve all symmetry with ext2_find_{first,next}_zero_bit()] This fixes http://bugzilla.kernel.org/show_bug.cgi?id=10393 [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/asm-m68k/bitops.h b/include/asm-m68k/bitops.h index 83d1f28..3e81064 100644 --- a/include/asm-m68k/bitops.h +++ b/include/asm-m68k/bitops.h @@ -410,8 +410,49 @@ static inline int ext2_find_next_zero_bit(const void *vaddr, unsigned size, res = ext2_find_first_zero_bit (p, size - 32 * (p - addr)); return (p - addr) * 32 + res; } -#define ext2_find_next_bit(addr, size, off) \ - generic_find_next_le_bit((unsigned long *)(addr), (size), (off)) + +static inline int ext2_find_first_bit(const void *vaddr, unsigned size) +{ + const unsigned long *p = vaddr, *addr = vaddr; + int res; + + if (!size) + return 0; + + size = (size >> 5) + ((size & 31) > 0); + while (*p++ == 0UL) { + if (--size == 0) + return (p - addr) << 5; + } + + --p; + for (res = 0; res < 32; res++) + if (ext2_test_bit(res, p)) + break; + return (p - addr) * 32 + res; +} + +static inline int ext2_find_next_bit(const void *vaddr, unsigned size, + unsigned offset) +{ + const unsigned long *addr = vaddr; + const unsigned long *p = addr + (offset >> 5); + int bit = offset & 31UL, res; + + if (offset >= size) + return size; + + if (bit) { + /* Look for one in first longword */ + for (res = bit; res < 32; res++) + if (ext2_test_bit(res, p)) + return (p - addr) * 32 + res; + p++; + } + /* No set bit yet, search remaining full bytes for a set bit */ + res = ext2_find_first_bit(p, size - 32 * (p - addr)); + return (p - addr) * 32 + res; +} #endif /* __KERNEL__ */ -- cgit v0.10.2 From 630c270183133ac25bef8c8d726ac448df9b169a Mon Sep 17 00:00:00 2001 From: Krzysztof Helt Date: Thu, 12 Jun 2008 15:21:29 -0700 Subject: hgafb: resource management fix Release ports which are requested during detection which are not freed if there is no hga card. Otherwise there is a crash during cat /proc/ioports command. Signed-off-by: Krzysztof Helt Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/hgafb.c b/drivers/video/hgafb.c index fb9e672..c18880d 100644 --- a/drivers/video/hgafb.c +++ b/drivers/video/hgafb.c @@ -279,7 +279,7 @@ static void hga_blank(int blank_mode) static int __init hga_card_detect(void) { - int count=0; + int count = 0; void __iomem *p, *q; unsigned short p_save, q_save; @@ -303,20 +303,18 @@ static int __init hga_card_detect(void) writew(0x55aa, p); if (readw(p) == 0x55aa) count++; writew(p_save, p); - if (count != 2) { - return 0; - } + if (count != 2) + goto error; /* Ok, there is definitely a card registering at the correct * memory location, so now we do an I/O port test. */ - if (!test_hga_b(0x66, 0x0f)) { /* cursor low register */ - return 0; - } - if (!test_hga_b(0x99, 0x0f)) { /* cursor low register */ - return 0; - } + if (!test_hga_b(0x66, 0x0f)) /* cursor low register */ + goto error; + + if (!test_hga_b(0x99, 0x0f)) /* cursor low register */ + goto error; /* See if the card is a Hercules, by checking whether the vsync * bit of the status register is changing. This test lasts for @@ -331,7 +329,7 @@ static int __init hga_card_detect(void) } if (p_save == q_save) - return 0; + goto error; switch (inb_p(HGA_STATUS_PORT) & 0x70) { case 0x10: @@ -348,6 +346,12 @@ static int __init hga_card_detect(void) break; } return 1; +error: + if (release_io_ports) + release_region(0x3b0, 12); + if (release_io_port) + release_region(0x3bf, 1); + return 0; } /** -- cgit v0.10.2 From 551e172a20cf960f7caab4d31b252dc59538bfa4 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Thu, 12 Jun 2008 15:21:31 -0700 Subject: cpusets: provide another web page URL in MAINTAINERS file Add URL for another CPUSETS web page to the MAINTAINERS file. This URL provides links to major LGPL user level C libraries supporting cpuset usage and user level cpu and node masks. Signed-off-by: Paul Jackson Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 9d43042..9187bb0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1202,6 +1202,7 @@ M: pj@sgi.com M: menage@google.com L: linux-kernel@vger.kernel.org W: http://www.bullopensource.org/cpuset/ +W: http://oss.sgi.com/projects/cpusets/ S: Supported CRAMFS FILESYSTEM -- cgit v0.10.2 From 57d3c64fd8130ebdacd85a36c9656ba5e221f3a3 Mon Sep 17 00:00:00 2001 From: Ben Nizette Date: Thu, 12 Jun 2008 15:21:31 -0700 Subject: proc_fs.h: move struct mm_struct forward-declaration Move the forward-declaration of struct mm_struct a little way up proc_fs.h. This fixes a bunch of "'struct mm_struct' declared inside parameter list" warnings with CONFIG_PROC_FS=n Signed-off-by: Ben Nizette Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/proc_fs.h b/include/linux/proc_fs.h index 9883bc9..fff1d27 100644 --- a/include/linux/proc_fs.h +++ b/include/linux/proc_fs.h @@ -9,6 +9,8 @@ struct net; struct completion; +struct mm_struct; + /* * The proc filesystem constants/structures */ @@ -101,8 +103,6 @@ extern spinlock_t proc_subdir_lock; extern void proc_root_init(void); extern void proc_misc_init(void); -struct mm_struct; - void proc_flush_task(struct task_struct *task); struct dentry *proc_pid_lookup(struct inode *dir, struct dentry * dentry, struct nameidata *); int proc_pid_readdir(struct file * filp, void * dirent, filldir_t filldir); -- cgit v0.10.2 From 8cdbc2b9826b3543fecff2f6d6400fa77b21ffdd Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Thu, 12 Jun 2008 15:21:33 -0700 Subject: capabilities: add (back) dummy support for KEEPCAPS The dummy module is used by folk that run security conscious code(!?). A feature of such code (for example, dhclient) is that it tries to operate with minimum privilege (dropping unneeded capabilities). While the dummy module doesn't restrict code execution based on capability state, the user code expects the kernel to appear to support it. This patch adds back faked support for the PR_SET_KEEPCAPS etc., calls - making the kernel behave as before 2.6.26. For details see: http://bugzilla.kernel.org/show_bug.cgi?id=10748 Signed-off-by: Andrew G. Morgan Acked-by: Serge Hallyn Cc: James Morris Cc: Stephen Smalley Cc: Chris Wright Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/dummy.c b/security/dummy.c index f50c6c3..b891688 100644 --- a/security/dummy.c +++ b/security/dummy.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include static int dummy_ptrace (struct task_struct *parent, struct task_struct *child) { @@ -607,7 +609,27 @@ static int dummy_task_kill (struct task_struct *p, struct siginfo *info, static int dummy_task_prctl (int option, unsigned long arg2, unsigned long arg3, unsigned long arg4, unsigned long arg5, long *rc_p) { - return 0; + switch (option) { + case PR_CAPBSET_READ: + *rc_p = (cap_valid(arg2) ? 1 : -EINVAL); + break; + case PR_GET_KEEPCAPS: + *rc_p = issecure(SECURE_KEEP_CAPS); + break; + case PR_SET_KEEPCAPS: + if (arg2 > 1) + *rc_p = -EINVAL; + else if (arg2) + current->securebits |= issecure_mask(SECURE_KEEP_CAPS); + else + current->securebits &= + ~issecure_mask(SECURE_KEEP_CAPS); + break; + default: + return 0; + } + + return 1; } static void dummy_task_reparent_to_init (struct task_struct *p) -- cgit v0.10.2 From 24aac480e76c6f5d1391ac05c5e9c0eb9b0cd302 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Thu, 12 Jun 2008 15:21:34 -0700 Subject: cciss: add new hardware support Add support for the next generation of HP Smart Array SAS/SATA controllers. Shipping date is late Fall 2008. Bump the driver version to 3.6.20 to reflect the new hardware support from patch 1 of this set. Signed-off-by: Mike Miller Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cciss.txt b/Documentation/cciss.txt index e65736c..63e59b8 100644 --- a/Documentation/cciss.txt +++ b/Documentation/cciss.txt @@ -21,6 +21,11 @@ This driver is known to work with the following cards: * SA E200 * SA E200i * SA E500 + * SA P212 + * SA P410 + * SA P410i + * SA P411 + * SA P812 Detecting drive failures: ------------------------- diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index e336b05..5f1e1cc 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -53,15 +53,16 @@ #include #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin)) -#define DRIVER_NAME "HP CISS Driver (v 3.6.14)" -#define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14) +#define DRIVER_NAME "HP CISS Driver (v 3.6.20)" +#define DRIVER_VERSION CCISS_DRIVER_VERSION(3, 6, 20) /* Embedded module documentation macros - see modules.h */ MODULE_AUTHOR("Hewlett-Packard Company"); -MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14"); +MODULE_DESCRIPTION("Driver for HP Smart Array Controllers"); MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400" - " SA6i P600 P800 P400 P400i E200 E200i E500"); -MODULE_VERSION("3.6.14"); + " SA6i P600 P800 P400 P400i E200 E200i E500 P700m" + " Smart Array G2 Series SAS/SATA Controllers"); +MODULE_VERSION("3.6.20"); MODULE_LICENSE("GPL"); #include "cciss_cmd.h" @@ -90,6 +91,11 @@ static const struct pci_device_id cciss_pci_device_id[] = { {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSD, 0x103C, 0x3215}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x3237}, {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSC, 0x103C, 0x323D}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3241}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3243}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3245}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3247}, + {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSE, 0x103C, 0x3249}, {PCI_VENDOR_ID_HP, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0}, {0,} @@ -123,6 +129,11 @@ static struct board_type products[] = { {0x3215103C, "Smart Array E200i", &SA5_access, 120}, {0x3237103C, "Smart Array E500", &SA5_access, 512}, {0x323D103C, "Smart Array P700m", &SA5_access, 512}, + {0x3241103C, "Smart Array P212", &SA5_access, 384}, + {0x3243103C, "Smart Array P410", &SA5_access, 384}, + {0x3245103C, "Smart Array P410i", &SA5_access, 384}, + {0x3247103C, "Smart Array P411", &SA5_access, 384}, + {0x3249103C, "Smart Array P812", &SA5_access, 384}, {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, }; diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index 9b940e6..eafc9d6 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -716,6 +716,7 @@ #define PCI_DEVICE_ID_HP_CISSA 0x3220 #define PCI_DEVICE_ID_HP_CISSC 0x3230 #define PCI_DEVICE_ID_HP_CISSD 0x3238 +#define PCI_DEVICE_ID_HP_CISSE 0x323a #define PCI_DEVICE_ID_HP_ZX2_IOC 0x4031 #define PCI_VENDOR_ID_PCTECH 0x1042 -- cgit v0.10.2 From 67dddaad5d8b8c5ee5b96a7e2f6cb0faad703865 Mon Sep 17 00:00:00 2001 From: Masami Hiramatsu Date: Thu, 12 Jun 2008 15:21:35 -0700 Subject: kprobes: fix error checking of batch registration Fix error checking routine to catch an error which occurs in first __register_*probe(). Signed-off-by: Masami Hiramatsu Cc: Ananth N Mavinakayanahalli Cc: Jim Keniston Cc: David Miller Cc: Anil S Keshavamurthy Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/kprobes.c b/kernel/kprobes.c index 1e0250c..d4998f8 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -699,8 +699,9 @@ static int __register_kprobes(struct kprobe **kps, int num, return -EINVAL; for (i = 0; i < num; i++) { ret = __register_kprobe(kps[i], called_from); - if (ret < 0 && i > 0) { - unregister_kprobes(kps, i); + if (ret < 0) { + if (i > 0) + unregister_kprobes(kps, i); break; } } @@ -776,8 +777,9 @@ static int __register_jprobes(struct jprobe **jps, int num, jp->kp.break_handler = longjmp_break_handler; ret = __register_kprobe(&jp->kp, called_from); } - if (ret < 0 && i > 0) { - unregister_jprobes(jps, i); + if (ret < 0) { + if (i > 0) + unregister_jprobes(jps, i); break; } } @@ -920,8 +922,9 @@ static int __register_kretprobes(struct kretprobe **rps, int num, return -EINVAL; for (i = 0; i < num; i++) { ret = __register_kretprobe(rps[i], called_from); - if (ret < 0 && i > 0) { - unregister_kretprobes(rps, i); + if (ret < 0) { + if (i > 0) + unregister_kretprobes(rps, i); break; } } -- cgit v0.10.2 From 6c38d8578545482fe45d6e6ea37be02a2e1bb289 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:36 -0700 Subject: m68knommu: init coldfire timer TRR with n - 1, not n The coldfire timer must be initialised to n - 1 if we want it to count n cycles between each tick interrupt. This was already fixed, but has been lost with the conversion to GENERIC_TIMER. Signed-off-by: Philippe De Muyter Acked-by: Greg Ungerer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/m68knommu/platform/coldfire/timers.c b/arch/m68knommu/platform/coldfire/timers.c index ba5a9f3..454f254 100644 --- a/arch/m68knommu/platform/coldfire/timers.c +++ b/arch/m68knommu/platform/coldfire/timers.c @@ -111,7 +111,13 @@ void hw_timer_init(void) __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); mcftmr_cycles_per_jiffy = FREQ / HZ; - __raw_writetrr(mcftmr_cycles_per_jiffy, TA(MCFTIMER_TRR)); + /* + * The coldfire timer runs from 0 to TRR included, then 0 + * again and so on. It counts thus actually TRR + 1 steps + * for 1 tick, not TRR. So if you want n cycles, + * initialize TRR with n - 1. + */ + __raw_writetrr(mcftmr_cycles_per_jiffy - 1, TA(MCFTIMER_TRR)); __raw_writew(MCFTIMER_TMR_ENORI | MCFTIMER_TMR_CLK16 | MCFTIMER_TMR_RESTART | MCFTIMER_TMR_ENABLE, TA(MCFTIMER_TMR)); -- cgit v0.10.2 From 529a4f4ec90ffd9394fdfc22bea7a858ae343171 Mon Sep 17 00:00:00 2001 From: Haavard Skinnemoen Date: Thu, 12 Jun 2008 15:21:38 -0700 Subject: rtc-at32ap700x: fix bug in at32_rtc_readalarm() alarm->pending indicates whether there's an alarm that has actually been triggered, not whether we're waiting for it. alarm->enabled indicates that. Also add missing locking around reading the RTC registers. Signed-off-by: Haavard Skinnemoen Signed-off-by: Alessandro Zummo Cc: Hans-Christian Egtvedt Cc: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-at32ap700x.c b/drivers/rtc/rtc-at32ap700x.c index 42244f1..2ef8cdf 100644 --- a/drivers/rtc/rtc-at32ap700x.c +++ b/drivers/rtc/rtc-at32ap700x.c @@ -94,8 +94,11 @@ static int at32_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct rtc_at32ap700x *rtc = dev_get_drvdata(dev); + spin_lock_irq(&rtc->lock); rtc_time_to_tm(rtc->alarm_time, &alrm->time); - alrm->pending = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->enabled = rtc_readl(rtc, IMR) & RTC_BIT(IMR_TOPI) ? 1 : 0; + alrm->pending = rtc_readl(rtc, ISR) & RTC_BIT(ISR_TOPI) ? 1 : 0; + spin_unlock_irq(&rtc->lock); return 0; } @@ -119,7 +122,7 @@ static int at32_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) spin_lock_irq(&rtc->lock); rtc->alarm_time = alarm_unix_time; rtc_writel(rtc, TOP, rtc->alarm_time); - if (alrm->pending) + if (alrm->enabled) rtc_writel(rtc, CTRL, rtc_readl(rtc, CTRL) | RTC_BIT(CTRL_TOPEN)); else -- cgit v0.10.2 From 14c8a77e1bbd693446dad297d2ae2dd22f187e4f Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 12 Jun 2008 15:21:40 -0700 Subject: uml: remove include of asm/user.h I allowed an include of asm/user.h to sneak back in. This patch replaces it with sys/user.h. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/sys-i386/registers.c b/arch/um/os-Linux/sys-i386/registers.c index b487cbe..229f7a5 100644 --- a/arch/um/os-Linux/sys-i386/registers.c +++ b/arch/um/os-Linux/sys-i386/registers.c @@ -6,7 +6,7 @@ #include #include -#include +#include #include "kern_constants.h" #include "longjmp.h" #include "user.h" @@ -76,7 +76,7 @@ int put_fp_registers(int pid, unsigned long *regs) void arch_init_registers(int pid) { - struct user_fxsr_struct fpx_regs; + struct user_fpxregs_struct fpx_regs; int err; err = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpx_regs); -- cgit v0.10.2 From f1ef9167ca4494a8c6d71d0031c73e9c8841eadd Mon Sep 17 00:00:00 2001 From: Jeff Dike Date: Thu, 12 Jun 2008 15:21:41 -0700 Subject: uml: work around broken host PTRACE_SYSEMU Fedora broke PTRACE_SYSEMU again, and UML crashes as a result when it doesn't need to. This patch makes the PTRACE_SYSEMU check fail gracefully and makes UML fall back to PTRACE_SYSCALL. Signed-off-by: Jeff Dike Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/um/os-Linux/start_up.c b/arch/um/os-Linux/start_up.c index b4b36e0..183db26 100644 --- a/arch/um/os-Linux/start_up.c +++ b/arch/um/os-Linux/start_up.c @@ -121,8 +121,10 @@ static int stop_ptraced_child(int pid, int exitcode, int mustexit) { int status, n, ret = 0; - if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) - fatal_perror("stop_ptraced_child : ptrace failed"); + if (ptrace(PTRACE_CONT, pid, 0, 0) < 0) { + perror("stop_ptraced_child : ptrace failed"); + return -1; + } CATCH_EINTR(n = waitpid(pid, &status, 0)); if (!WIFEXITED(status) || (WEXITSTATUS(status) != exitcode)) { int exit_with = WEXITSTATUS(status); @@ -212,7 +214,7 @@ static void __init check_sysemu(void) if (n < 0) fatal_perror("check_sysemu : wait failed"); if (!WIFSTOPPED(status) || (WSTOPSIG(status) != SIGTRAP)) - fatal("check_sysemu : expected SIGTRAP, got status = %d", + fatal("check_sysemu : expected SIGTRAP, got status = %d\n", status); if (ptrace(PTRACE_GETREGS, pid, 0, regs) < 0) @@ -254,9 +256,11 @@ static void __init check_sysemu(void) if (WIFSTOPPED(status) && (WSTOPSIG(status) == (SIGTRAP|0x80))) { - if (!count) - fatal("check_ptrace : SYSEMU_SINGLESTEP " - "doesn't singlestep"); + if (!count) { + non_fatal("check_ptrace : SYSEMU_SINGLESTEP " + "doesn't singlestep"); + goto fail; + } n = ptrace(PTRACE_POKEUSR, pid, PT_SYSCALL_RET_OFFSET, os_getpid()); if (n < 0) @@ -266,9 +270,12 @@ static void __init check_sysemu(void) } else if (WIFSTOPPED(status) && (WSTOPSIG(status) == SIGTRAP)) count++; - else - fatal("check_ptrace : expected SIGTRAP or " - "(SIGTRAP | 0x80), got status = %d", status); + else { + non_fatal("check_ptrace : expected SIGTRAP or " + "(SIGTRAP | 0x80), got status = %d\n", + status); + goto fail; + } } if (stop_ptraced_child(pid, 0, 0) < 0) goto fail_stopped; -- cgit v0.10.2 From 30ec261e5f97986644c0982543bc1cee1b2782bf Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Thu, 12 Jun 2008 15:21:41 -0700 Subject: MAINTAINERS: update maintainership of pxa2xx/pxa3xx Signed-off-by: Eric Miao Acked-by: Russell King Acked-by: Nicolas Pitre Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 9187bb0..88aac5f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3330,9 +3330,11 @@ L: video4linux-list@redhat.com W: http://www.isely.net/pvrusb2/ S: Maintained -PXA2xx SUPPORT -P: Nicolas Pitre -M: nico@cam.org +PXA2xx/PXA3xx SUPPORT +P: Eric Miao +M: eric.miao@marvell.com +P: Russell King +M: linux@arm.linux.org.uk L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only) S: Maintained -- cgit v0.10.2 From cef33400d0349fb24b6f8b7dea79b66e3144fd8b Mon Sep 17 00:00:00 2001 From: Chuck Ebbert Date: Thu, 12 Jun 2008 15:21:42 -0700 Subject: mmc: wbsd: initialize tasklets before requesting interrupt With CONFIG_DEBUG_SHIRQ set we will get an interrupt as soon as we allocate one. Tasklets may be scheduled in the interrupt handler but they will be initialized after the handler returns, causing a BUG() in kernel/softirq.c when they run. Should fix this Fedora bug report: https://bugzilla.redhat.com/show_bug.cgi?id=449817 Signed-off-by: Chuck Ebbert Acked-by: Pierre Ossman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index be624a0..c303e7f 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -1457,17 +1457,7 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) int ret; /* - * Allocate interrupt. - */ - - ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); - if (ret) - return ret; - - host->irq = irq; - - /* - * Set up tasklets. + * Set up tasklets. Must be done before requesting interrupt. */ tasklet_init(&host->card_tasklet, wbsd_tasklet_card, (unsigned long)host); @@ -1480,6 +1470,15 @@ static int __devinit wbsd_request_irq(struct wbsd_host *host, int irq) tasklet_init(&host->finish_tasklet, wbsd_tasklet_finish, (unsigned long)host); + /* + * Allocate interrupt. + */ + ret = request_irq(irq, wbsd_irq, IRQF_SHARED, DRIVER_NAME, host); + if (ret) + return ret; + + host->irq = irq; + return 0; } -- cgit v0.10.2 From 093a44e71aa29157fb1611b00507d67c954099d6 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Thu, 12 Jun 2008 15:21:43 -0700 Subject: drivers/isdn/sc/ioctl.c: add missing kfree spid has been allocated in this function and so should be freed before leaving it, as in the other error handling cases. The semantic match that finds the problem is as follows: (http://www.emn.fr/x-info/coccinelle/) @r exists@ expression E,E1; statement S; position p1,p2,p3; @@ E =@p1 \(kmalloc\|kcalloc\|kzalloc\)(...) ... when != E = E1 if (E == NULL || ...) S ... when != E = E1 if@p2 (...) { ... when != kfree(E) } ... when != E = E1 kfree@p3(E); @forall@ position r.p2; expression r.E; int E1 != 0; @@ * if@p2 (...) { ... when != kfree(E) when strict return E1; } Signed-off-by: Julia Lawall Cc: Karsten Keil Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/isdn/sc/ioctl.c b/drivers/isdn/sc/ioctl.c index 7817d22..1081091 100644 --- a/drivers/isdn/sc/ioctl.c +++ b/drivers/isdn/sc/ioctl.c @@ -226,6 +226,7 @@ int sc_ioctl(int card, scs_ioctl *data) */ if (copy_from_user(spid, data->dataptr, SCIOC_SPIDSIZE)) { kfree(rcvmsg); + kfree(spid); return -EFAULT; } -- cgit v0.10.2 From c97aee9ba43d60ff20d955065d29b6d3d8c950d5 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Thu, 12 Jun 2008 15:21:45 -0700 Subject: intel_rng: make device not found a warning Since many distros load this driver by default (throw it against the wall and see what sticks method). Change the error message severity level to avoid alarming users. Isn't it annoying when users actually read the error logs... Signed-off-by: Stephen Hemminger Cc: Michael Buesch Acked-by: Jan Beulich Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/hw_random/intel-rng.c b/drivers/char/hw_random/intel-rng.c index 5cc651e..27fdc08 100644 --- a/drivers/char/hw_random/intel-rng.c +++ b/drivers/char/hw_random/intel-rng.c @@ -273,7 +273,7 @@ static int __init intel_rng_hw_init(void *_intel_rng_hw) if (mfc != INTEL_FWH_MANUFACTURER_CODE || (dvc != INTEL_FWH_DEVICE_CODE_8M && dvc != INTEL_FWH_DEVICE_CODE_4M)) { - printk(KERN_ERR PFX "FWH not detected\n"); + printk(KERN_NOTICE PFX "FWH not detected\n"); return -ENODEV; } -- cgit v0.10.2 From e59b6a5ab51f6192cbe20d4f031335fe6d0e73fd Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:45 -0700 Subject: drivers/video/cirrusfb: fix RAM address printk In the cirrusfb driver, the RAM address printk has a superfluous 'x' that could be interpreted as "don't care", while it is actually a typo. Fix that. [akpm@linux-foundation.org: join the two printk strings to make it atomic] Signed-off-by: Philippe De Muyter Cc: Jiri Slaby Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/cirrusfb.c b/drivers/video/cirrusfb.c index 35ac9d9..c14b243 100644 --- a/drivers/video/cirrusfb.c +++ b/drivers/video/cirrusfb.c @@ -2432,9 +2432,9 @@ static int cirrusfb_pci_register(struct pci_dev *pdev, info->screen_size = board_size; cinfo->unmap = cirrusfb_pci_unmap; - printk(KERN_INFO " RAM (%lu kB) at 0xx%lx, ", - info->screen_size >> 10, board_addr); - printk(KERN_INFO "Cirrus Logic chipset on PCI bus\n"); + printk(KERN_INFO "RAM (%lu kB) at 0x%lx, Cirrus " + "Logic chipset on PCI bus\n", + info->screen_size >> 10, board_addr); pci_set_drvdata(pdev, info); ret = cirrusfb_register(info); -- cgit v0.10.2 From cfc53f65f56f9f33c0cf522124045ac5a64076b3 Mon Sep 17 00:00:00 2001 From: Philippe De Muyter Date: Thu, 12 Jun 2008 15:21:46 -0700 Subject: driver/char/generic_nvram: fix banner The generic nvram driver announces itself as 'Macintosh non-volatile memory driver' instead of 'Generic non-volatile memory driver'. Fix that. Signed-off-by: Philippe De Muyter Cc: Benjamin Herrenschmidt Cc: Arjan van de Ven Cc: Paul Mackerras Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/generic_nvram.c b/drivers/char/generic_nvram.c index 2398e86..a00869c 100644 --- a/drivers/char/generic_nvram.c +++ b/drivers/char/generic_nvram.c @@ -133,7 +133,7 @@ static struct miscdevice nvram_dev = { int __init nvram_init(void) { - printk(KERN_INFO "Macintosh non-volatile memory driver v%s\n", + printk(KERN_INFO "Generic non-volatile memory driver v%s\n", NVRAM_VERSION); return misc_register(&nvram_dev); } -- cgit v0.10.2 From 2165009bdf63f79716a36ad545df14c3cdf958b7 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 12 Jun 2008 15:21:47 -0700 Subject: pagemap: pass mm into pagewalkers We need this at least for huge page detection for now, because powerpc needs the vm_area_struct to be able to determine whether a virtual address is referring to a huge page (its pmd_huge() doesn't work). It might also come in handy for some of the other users. Signed-off-by: Dave Hansen Acked-by: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 1740362..f0df310 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -315,9 +315,9 @@ struct mem_size_stats { }; static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, - void *private) + struct mm_walk *walk) { - struct mem_size_stats *mss = private; + struct mem_size_stats *mss = walk->private; struct vm_area_struct *vma = mss->vma; pte_t *pte, ptent; spinlock_t *ptl; @@ -365,19 +365,21 @@ static int smaps_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, return 0; } -static struct mm_walk smaps_walk = { .pmd_entry = smaps_pte_range }; - static int show_smap(struct seq_file *m, void *v) { struct vm_area_struct *vma = v; struct mem_size_stats mss; int ret; + struct mm_walk smaps_walk = { + .pmd_entry = smaps_pte_range, + .mm = vma->vm_mm, + .private = &mss, + }; memset(&mss, 0, sizeof mss); mss.vma = vma; if (vma->vm_mm && !is_vm_hugetlb_page(vma)) - walk_page_range(vma->vm_mm, vma->vm_start, vma->vm_end, - &smaps_walk, &mss); + walk_page_range(vma->vm_start, vma->vm_end, &smaps_walk); ret = show_map(m, v); if (ret) @@ -426,9 +428,9 @@ const struct file_operations proc_smaps_operations = { }; static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr, - unsigned long end, void *private) + unsigned long end, struct mm_walk *walk) { - struct vm_area_struct *vma = private; + struct vm_area_struct *vma = walk->private; pte_t *pte, ptent; spinlock_t *ptl; struct page *page; @@ -452,8 +454,6 @@ static int clear_refs_pte_range(pmd_t *pmd, unsigned long addr, return 0; } -static struct mm_walk clear_refs_walk = { .pmd_entry = clear_refs_pte_range }; - static ssize_t clear_refs_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { @@ -476,11 +476,17 @@ static ssize_t clear_refs_write(struct file *file, const char __user *buf, return -ESRCH; mm = get_task_mm(task); if (mm) { + static struct mm_walk clear_refs_walk; + memset(&clear_refs_walk, 0, sizeof(clear_refs_walk)); + clear_refs_walk.pmd_entry = clear_refs_pte_range; + clear_refs_walk.mm = mm; down_read(&mm->mmap_sem); - for (vma = mm->mmap; vma; vma = vma->vm_next) + for (vma = mm->mmap; vma; vma = vma->vm_next) { + clear_refs_walk.private = vma; if (!is_vm_hugetlb_page(vma)) - walk_page_range(mm, vma->vm_start, vma->vm_end, - &clear_refs_walk, vma); + walk_page_range(vma->vm_start, vma->vm_end, + &clear_refs_walk); + } flush_tlb_mm(mm); up_read(&mm->mmap_sem); mmput(mm); @@ -528,9 +534,9 @@ static int add_to_pagemap(unsigned long addr, u64 pfn, } static int pagemap_pte_hole(unsigned long start, unsigned long end, - void *private) + struct mm_walk *walk) { - struct pagemapread *pm = private; + struct pagemapread *pm = walk->private; unsigned long addr; int err = 0; for (addr = start; addr < end; addr += PAGE_SIZE) { @@ -548,9 +554,9 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte) } static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, - void *private) + struct mm_walk *walk) { - struct pagemapread *pm = private; + struct pagemapread *pm = walk->private; pte_t *pte; int err = 0; @@ -675,8 +681,8 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, * user buffer is tracked in "pm", and the walk * will stop when we hit the end of the buffer. */ - ret = walk_page_range(mm, start_vaddr, end_vaddr, - &pagemap_walk, &pm); + ret = walk_page_range(start_vaddr, end_vaddr, + &pagemap_walk); if (ret == PM_END_OF_BUFFER) ret = 0; /* don't need mmap_sem for these, but this looks cleaner */ diff --git a/include/linux/mm.h b/include/linux/mm.h index c31a9cd..586a943 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -760,16 +760,17 @@ unsigned long unmap_vmas(struct mmu_gather **tlb, * (see walk_page_range for more details) */ struct mm_walk { - int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, void *); - int (*pud_entry)(pud_t *, unsigned long, unsigned long, void *); - int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, void *); - int (*pte_entry)(pte_t *, unsigned long, unsigned long, void *); - int (*pte_hole)(unsigned long, unsigned long, void *); + int (*pgd_entry)(pgd_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pud_entry)(pud_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pmd_entry)(pmd_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pte_entry)(pte_t *, unsigned long, unsigned long, struct mm_walk *); + int (*pte_hole)(unsigned long, unsigned long, struct mm_walk *); + struct mm_struct *mm; + void *private; }; -int walk_page_range(const struct mm_struct *, unsigned long addr, - unsigned long end, const struct mm_walk *walk, - void *private); +int walk_page_range(unsigned long addr, unsigned long end, + struct mm_walk *walk); void free_pgd_range(struct mmu_gather **tlb, unsigned long addr, unsigned long end, unsigned long floor, unsigned long ceiling); void free_pgtables(struct mmu_gather **tlb, struct vm_area_struct *start_vma, diff --git a/mm/pagewalk.c b/mm/pagewalk.c index 0afd238..d5878be 100644 --- a/mm/pagewalk.c +++ b/mm/pagewalk.c @@ -3,14 +3,14 @@ #include static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) + struct mm_walk *walk) { pte_t *pte; int err = 0; pte = pte_offset_map(pmd, addr); for (;;) { - err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, private); + err = walk->pte_entry(pte, addr, addr + PAGE_SIZE, walk); if (err) break; addr += PAGE_SIZE; @@ -24,7 +24,7 @@ static int walk_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, } static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) + struct mm_walk *walk) { pmd_t *pmd; unsigned long next; @@ -35,15 +35,15 @@ static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end, next = pmd_addr_end(addr, end); if (pmd_none_or_clear_bad(pmd)) { if (walk->pte_hole) - err = walk->pte_hole(addr, next, private); + err = walk->pte_hole(addr, next, walk); if (err) break; continue; } if (walk->pmd_entry) - err = walk->pmd_entry(pmd, addr, next, private); + err = walk->pmd_entry(pmd, addr, next, walk); if (!err && walk->pte_entry) - err = walk_pte_range(pmd, addr, next, walk, private); + err = walk_pte_range(pmd, addr, next, walk); if (err) break; } while (pmd++, addr = next, addr != end); @@ -52,7 +52,7 @@ static int walk_pmd_range(pud_t *pud, unsigned long addr, unsigned long end, } static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) + struct mm_walk *walk) { pud_t *pud; unsigned long next; @@ -63,15 +63,15 @@ static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, next = pud_addr_end(addr, end); if (pud_none_or_clear_bad(pud)) { if (walk->pte_hole) - err = walk->pte_hole(addr, next, private); + err = walk->pte_hole(addr, next, walk); if (err) break; continue; } if (walk->pud_entry) - err = walk->pud_entry(pud, addr, next, private); + err = walk->pud_entry(pud, addr, next, walk); if (!err && (walk->pmd_entry || walk->pte_entry)) - err = walk_pmd_range(pud, addr, next, walk, private); + err = walk_pmd_range(pud, addr, next, walk); if (err) break; } while (pud++, addr = next, addr != end); @@ -85,15 +85,15 @@ static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, * @addr: starting address * @end: ending address * @walk: set of callbacks to invoke for each level of the tree - * @private: private data passed to the callback function * * Recursively walk the page table for the memory area in a VMA, * calling supplied callbacks. Callbacks are called in-order (first * PGD, first PUD, first PMD, first PTE, second PTE... second PMD, * etc.). If lower-level callbacks are omitted, walking depth is reduced. * - * Each callback receives an entry pointer, the start and end of the - * associated range, and a caller-supplied private data pointer. + * Each callback receives an entry pointer and the start and end of the + * associated range, and a copy of the original mm_walk for access to + * the ->private or ->mm fields. * * No locks are taken, but the bottom level iterator will map PTE * directories from highmem if necessary. @@ -101,9 +101,8 @@ static int walk_pud_range(pgd_t *pgd, unsigned long addr, unsigned long end, * If any callback returns a non-zero value, the walk is aborted and * the return value is propagated back to the caller. Otherwise 0 is returned. */ -int walk_page_range(const struct mm_struct *mm, - unsigned long addr, unsigned long end, - const struct mm_walk *walk, void *private) +int walk_page_range(unsigned long addr, unsigned long end, + struct mm_walk *walk) { pgd_t *pgd; unsigned long next; @@ -112,21 +111,24 @@ int walk_page_range(const struct mm_struct *mm, if (addr >= end) return err; - pgd = pgd_offset(mm, addr); + if (!walk->mm) + return -EINVAL; + + pgd = pgd_offset(walk->mm, addr); do { next = pgd_addr_end(addr, end); if (pgd_none_or_clear_bad(pgd)) { if (walk->pte_hole) - err = walk->pte_hole(addr, next, private); + err = walk->pte_hole(addr, next, walk); if (err) break; continue; } if (walk->pgd_entry) - err = walk->pgd_entry(pgd, addr, next, private); + err = walk->pgd_entry(pgd, addr, next, walk); if (!err && (walk->pud_entry || walk->pmd_entry || walk->pte_entry)) - err = walk_pud_range(pgd, addr, next, walk, private); + err = walk_pud_range(pgd, addr, next, walk); if (err) break; } while (pgd++, addr = next, addr != end); -- cgit v0.10.2 From bcf8039ed45f56013c4afea5520bca7d909e5e61 Mon Sep 17 00:00:00 2001 From: Dave Hansen Date: Thu, 12 Jun 2008 15:21:48 -0700 Subject: pagemap: fix large pages in pagemap We were walking right into huge page areas in the pagemap walker, and calling the pmds pmd_bad() and clearing them. That leaked huge pages. Bad. This patch at least works around that for now. It ignores huge pages in the pagemap walker for the time being, and won't leak those pages. Signed-off-by: Dave Hansen Acked-by: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index f0df310..ab8ccc9 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -553,24 +553,45 @@ static u64 swap_pte_to_pagemap_entry(pte_t pte) return swp_type(e) | (swp_offset(e) << MAX_SWAPFILES_SHIFT); } +static unsigned long pte_to_pagemap_entry(pte_t pte) +{ + unsigned long pme = 0; + if (is_swap_pte(pte)) + pme = PM_PFRAME(swap_pte_to_pagemap_entry(pte)) + | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP; + else if (pte_present(pte)) + pme = PM_PFRAME(pte_pfn(pte)) + | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT; + return pme; +} + static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, struct mm_walk *walk) { + struct vm_area_struct *vma; struct pagemapread *pm = walk->private; pte_t *pte; int err = 0; + /* find the first VMA at or above 'addr' */ + vma = find_vma(walk->mm, addr); for (; addr != end; addr += PAGE_SIZE) { u64 pfn = PM_NOT_PRESENT; - pte = pte_offset_map(pmd, addr); - if (is_swap_pte(*pte)) - pfn = PM_PFRAME(swap_pte_to_pagemap_entry(*pte)) - | PM_PSHIFT(PAGE_SHIFT) | PM_SWAP; - else if (pte_present(*pte)) - pfn = PM_PFRAME(pte_pfn(*pte)) - | PM_PSHIFT(PAGE_SHIFT) | PM_PRESENT; - /* unmap so we're not in atomic when we copy to userspace */ - pte_unmap(pte); + + /* check to see if we've left 'vma' behind + * and need a new, higher one */ + if (vma && (addr >= vma->vm_end)) + vma = find_vma(walk->mm, addr); + + /* check that 'vma' actually covers this address, + * and that it isn't a huge page vma */ + if (vma && (vma->vm_start <= addr) && + !is_vm_hugetlb_page(vma)) { + pte = pte_offset_map(pmd, addr); + pfn = pte_to_pagemap_entry(*pte); + /* unmap before userspace copy */ + pte_unmap(pte); + } err = add_to_pagemap(addr, pfn, pm); if (err) return err; -- cgit v0.10.2 From 6c826818ff55eae7702b778b5f8bdf765af3b2af Mon Sep 17 00:00:00 2001 From: Paul Menage Date: Thu, 12 Jun 2008 15:21:49 -0700 Subject: /proc/sysvipc/shm: fix 32-bit truncation of segment sizes sysvipc_shm_proc_show() picks between format strings (based on the expected maximum length of a SHM segment) in a way that prevents gcc from performing format checks on the seq_printf() parameters. This hid two format errors - shp->shm_segsz and shp->shm_nattach are both unsigned long, but were being printed as unsigned int and signed int respectively. This leads to 32-bit truncation of SHM segment sizes reported in /proc/sysvipc/shm. (And for nattach, but that's less of a problem for most users). This patch makes the format string directly visible to gcc's format specifier checker, and fixes the two broken format specifiers. Signed-off-by: Paul Menage Cc: Nadia Derbey Cc: Manfred Spraul Cc: Pierre Peiffer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/ipc/shm.c b/ipc/shm.c index d05f6b5..790240c 100644 --- a/ipc/shm.c +++ b/ipc/shm.c @@ -1058,16 +1058,16 @@ asmlinkage long sys_shmdt(char __user *shmaddr) static int sysvipc_shm_proc_show(struct seq_file *s, void *it) { struct shmid_kernel *shp = it; - char *format; -#define SMALL_STRING "%10d %10d %4o %10u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n" -#define BIG_STRING "%10d %10d %4o %21u %5u %5u %5d %5u %5u %5u %5u %10lu %10lu %10lu\n" +#if BITS_PER_LONG <= 32 +#define SIZE_SPEC "%10lu" +#else +#define SIZE_SPEC "%21lu" +#endif - if (sizeof(size_t) <= sizeof(int)) - format = SMALL_STRING; - else - format = BIG_STRING; - return seq_printf(s, format, + return seq_printf(s, + "%10d %10d %4o " SIZE_SPEC " %5u %5u " + "%5lu %5u %5u %5u %5u %10lu %10lu %10lu\n", shp->shm_perm.key, shp->shm_perm.id, shp->shm_perm.mode, -- cgit v0.10.2 From d2187ebd84c7dd13ef269e9600f4daebeb02816e Mon Sep 17 00:00:00 2001 From: Jiri Bohac Date: Thu, 12 Jun 2008 15:21:51 -0700 Subject: console keyboard mapping broken by 04c71976 Several console keyboard maps are broken since commit 04c71976500352d02f60616d2b960267d8c5fe24 Author: Samuel Thibault Date: Tue Oct 16 23:27:04 2007 -0700 unicode diacritics support because that changeset made k_self consider the value as a latin1 character when in Unicode mode, which is wrong; k_self should still take the console map into account. Signed-off-by: Samuel Thibault Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/keyboard.c b/drivers/char/keyboard.c index 7f7e798..d9a0a53 100644 --- a/drivers/char/keyboard.c +++ b/drivers/char/keyboard.c @@ -677,12 +677,7 @@ static void k_deadunicode(struct vc_data *vc, unsigned int value, char up_flag) static void k_self(struct vc_data *vc, unsigned char value, char up_flag) { - unsigned int uni; - if (kbd->kbdmode == VC_UNICODE) - uni = value; - else - uni = conv_8bit_to_uni(value); - k_unicode(vc, uni, up_flag); + k_unicode(vc, conv_8bit_to_uni(value), up_flag); } static void k_dead2(struct vc_data *vc, unsigned char value, char up_flag) -- cgit v0.10.2 From 643b52b9c0b4e959436b4b551ebf4060d06d5ae8 Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 12 Jun 2008 15:21:52 -0700 Subject: radix-tree: fix small lockless radix-tree bug We shrink a radix tree when its root node has only one child, in the left most slot. The child becomes the new root node. To perform this operation in a manner compatible with concurrent lockless lookups, we atomically switch the root pointer from the parent to its child. However a concurrent lockless lookup may now have loaded a pointer to the parent (and is presently deciding what to do next). For this reason, we also have to keep the parent node in a valid state after shrinking the tree, until the next RCU grace period -- otherwise this lookup with the parent pointer may not do the right thing. Notably, we need to keep the child in the left most slot there in case that is requested by the lookup. This is all pretty standard RCU stuff. It is worth repeating because in my eagerness to obey the radix tree node constructor scheme, I had broken it by zeroing the radix tree node before the grace period. What could happen is that a lookup can load the parent pointer, then decide it wants to follow the left most child slot, only to find the slot contained NULL due to the concurrent shrinker having zeroed the parent node before waiting for a grace period. The lookup would return a false negative as a result. Fix it by doing that clearing in the RCU callback. I would normally want to rip out the constructor entirely, but radix tree nodes are one of those places where they make sense (only few cachelines will be touched soon after allocation). This was never actually found in any lockless pagecache testing or by the test harness, but by seeing the odd problem with my scalable vmap rewrite. I have not tickled the test harness into reproducing it yet, but I'll keep working at it. Fortunately, it is not a problem anywhere lockless pagecache is used in mainline kernels (pagecache probe is not a guarantee, and brd does not have concurrent lookups and deletes). Signed-off-by: Nick Piggin Acked-by: Peter Zijlstra Cc: "Paul E. McKenney" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/radix-tree.c b/lib/radix-tree.c index bd52171..169a2f8 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -88,6 +88,57 @@ static inline gfp_t root_gfp_mask(struct radix_tree_root *root) return root->gfp_mask & __GFP_BITS_MASK; } +static inline void tag_set(struct radix_tree_node *node, unsigned int tag, + int offset) +{ + __set_bit(offset, node->tags[tag]); +} + +static inline void tag_clear(struct radix_tree_node *node, unsigned int tag, + int offset) +{ + __clear_bit(offset, node->tags[tag]); +} + +static inline int tag_get(struct radix_tree_node *node, unsigned int tag, + int offset) +{ + return test_bit(offset, node->tags[tag]); +} + +static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag) +{ + root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT)); +} + +static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag) +{ + root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT)); +} + +static inline void root_tag_clear_all(struct radix_tree_root *root) +{ + root->gfp_mask &= __GFP_BITS_MASK; +} + +static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag) +{ + return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT)); +} + +/* + * Returns 1 if any slot in the node has this tag set. + * Otherwise returns 0. + */ +static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag) +{ + int idx; + for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) { + if (node->tags[tag][idx]) + return 1; + } + return 0; +} /* * This assumes that the caller has performed appropriate preallocation, and * that the caller has pinned this thread of control to the current CPU. @@ -124,6 +175,17 @@ static void radix_tree_node_rcu_free(struct rcu_head *head) { struct radix_tree_node *node = container_of(head, struct radix_tree_node, rcu_head); + + /* + * must only free zeroed nodes into the slab. radix_tree_shrink + * can leave us with a non-NULL entry in the first slot, so clear + * that here to make sure. + */ + tag_clear(node, 0, 0); + tag_clear(node, 1, 0); + node->slots[0] = NULL; + node->count = 0; + kmem_cache_free(radix_tree_node_cachep, node); } @@ -165,59 +227,6 @@ out: } EXPORT_SYMBOL(radix_tree_preload); -static inline void tag_set(struct radix_tree_node *node, unsigned int tag, - int offset) -{ - __set_bit(offset, node->tags[tag]); -} - -static inline void tag_clear(struct radix_tree_node *node, unsigned int tag, - int offset) -{ - __clear_bit(offset, node->tags[tag]); -} - -static inline int tag_get(struct radix_tree_node *node, unsigned int tag, - int offset) -{ - return test_bit(offset, node->tags[tag]); -} - -static inline void root_tag_set(struct radix_tree_root *root, unsigned int tag) -{ - root->gfp_mask |= (__force gfp_t)(1 << (tag + __GFP_BITS_SHIFT)); -} - - -static inline void root_tag_clear(struct radix_tree_root *root, unsigned int tag) -{ - root->gfp_mask &= (__force gfp_t)~(1 << (tag + __GFP_BITS_SHIFT)); -} - -static inline void root_tag_clear_all(struct radix_tree_root *root) -{ - root->gfp_mask &= __GFP_BITS_MASK; -} - -static inline int root_tag_get(struct radix_tree_root *root, unsigned int tag) -{ - return (__force unsigned)root->gfp_mask & (1 << (tag + __GFP_BITS_SHIFT)); -} - -/* - * Returns 1 if any slot in the node has this tag set. - * Otherwise returns 0. - */ -static inline int any_tag_set(struct radix_tree_node *node, unsigned int tag) -{ - int idx; - for (idx = 0; idx < RADIX_TREE_TAG_LONGS; idx++) { - if (node->tags[tag][idx]) - return 1; - } - return 0; -} - /* * Return the maximum key which can be store into a * radix tree with height HEIGHT. @@ -930,11 +939,6 @@ static inline void radix_tree_shrink(struct radix_tree_root *root) newptr = radix_tree_ptr_to_indirect(newptr); root->rnode = newptr; root->height--; - /* must only free zeroed nodes into the slab */ - tag_clear(to_free, 0, 0); - tag_clear(to_free, 1, 0); - to_free->slots[0] = NULL; - to_free->count = 0; radix_tree_node_free(to_free); } } -- cgit v0.10.2 From 1da2e3d679a8ea2d9e82040359a706da0bd3bef6 Mon Sep 17 00:00:00 2001 From: Stas Sergeev Date: Thu, 12 Jun 2008 15:21:54 -0700 Subject: provide rtc_cmos platform device Recently (around 2.6.25) I've noticed that RTC no longer works for me. It turned out this is because I use pnpacpi=off kernel option to work around the parport_pc bugs. I always did so, but RTC used to work fine in the past, and now it have regressed. The patch fixes the problem by creating the platform device for the RTC when PNP is disabled. This may also help running the PNP-enabled kernel on an older PCs. Signed-off-by: Stas Sergeev Cc: David Brownell Cc: Ingo Molnar Cc: Thomas Gleixner Cc: Bjorn Helgaas Cc: Adam Belay Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/x86/kernel/rtc.c b/arch/x86/kernel/rtc.c index 9615eee..05191bb 100644 --- a/arch/x86/kernel/rtc.c +++ b/arch/x86/kernel/rtc.c @@ -4,6 +4,8 @@ #include #include #include +#include +#include #include #include @@ -197,3 +199,35 @@ unsigned long long native_read_tsc(void) } EXPORT_SYMBOL(native_read_tsc); + +static struct resource rtc_resources[] = { + [0] = { + .start = RTC_PORT(0), + .end = RTC_PORT(1), + .flags = IORESOURCE_IO, + }, + [1] = { + .start = RTC_IRQ, + .end = RTC_IRQ, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device rtc_device = { + .name = "rtc_cmos", + .id = -1, + .resource = rtc_resources, + .num_resources = ARRAY_SIZE(rtc_resources), +}; + +static __init int add_rtc_cmos(void) +{ +#ifdef CONFIG_PNP + if (!pnp_platform_devices) + platform_device_register(&rtc_device); +#else + platform_device_register(&rtc_device); +#endif /* CONFIG_PNP */ + return 0; +} +device_initcall(add_rtc_cmos); diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c index d060a06..d7bb9ba 100644 --- a/drivers/rtc/rtc-cmos.c +++ b/drivers/rtc/rtc-cmos.c @@ -905,19 +905,7 @@ static struct pnp_driver cmos_pnp_driver = { .resume = cmos_pnp_resume, }; -static int __init cmos_init(void) -{ - return pnp_register_driver(&cmos_pnp_driver); -} -module_init(cmos_init); - -static void __exit cmos_exit(void) -{ - pnp_unregister_driver(&cmos_pnp_driver); -} -module_exit(cmos_exit); - -#else /* no PNP */ +#endif /* CONFIG_PNP */ /*----------------------------------------------------------------*/ @@ -958,20 +946,33 @@ static struct platform_driver cmos_platform_driver = { static int __init cmos_init(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + return pnp_register_driver(&cmos_pnp_driver); + else + return platform_driver_probe(&cmos_platform_driver, + cmos_platform_probe); +#else return platform_driver_probe(&cmos_platform_driver, cmos_platform_probe); +#endif /* CONFIG_PNP */ } module_init(cmos_init); static void __exit cmos_exit(void) { +#ifdef CONFIG_PNP + if (pnp_platform_devices) + pnp_unregister_driver(&cmos_pnp_driver); + else + platform_driver_unregister(&cmos_platform_driver); +#else platform_driver_unregister(&cmos_platform_driver); +#endif /* CONFIG_PNP */ } module_exit(cmos_exit); -#endif /* !PNP */ - MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From e6d2bb2bacb43ff03b0f458108d71981d58e775a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 15:21:55 -0700 Subject: rtc: make HPET_RTC_IRQ track HPET_EMULATE_RTC More Kconfig tweaks related to the legacy PC RTC code: - Describe the legacy PC RTC driver as such ... it's never quite been clear that this driver is for PC RTCs, and now it's fair to call this the "legacy" driver. - Force it to understand about HPET stealing its IRQs ... kernel code does this always when HPET is in use, there should be no option for users to goof up the config. This seems to fix kernel bugzilla #10729. Signed-off-by: David Brownell Cc: Maxim Levitsky Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig index d307bf2..2d854bb 100644 --- a/drivers/char/Kconfig +++ b/drivers/char/Kconfig @@ -749,7 +749,7 @@ config NVRAM if RTC_LIB=n config RTC - tristate "Enhanced Real Time Clock Support" + tristate "Enhanced Real Time Clock Support (legacy PC RTC driver)" depends on !PPC && !PARISC && !IA64 && !M68K && !SPARC && !FRV \ && !ARM && !SUPERH && !S390 && !AVR32 ---help--- @@ -1036,9 +1036,9 @@ config HPET non-periodic and/or periodic. config HPET_RTC_IRQ - bool "HPET Control RTC IRQ" if !HPET_EMULATE_RTC - default n - depends on HPET + bool + default HPET_EMULATE_RTC + depends on RTC && HPET help If you say Y here, you will disable RTC_IRQ in drivers/char/rtc.c. It is assumed the platform called hpet_alloc with the RTC IRQ values for -- cgit v0.10.2 From c6d8f400cc7610f04177f81168c19b8407cb48c3 Mon Sep 17 00:00:00 2001 From: Sergey Lapin Date: Thu, 12 Jun 2008 15:21:55 -0700 Subject: rtc: Ramtron FM3130 RTC support Ramtron FM3130 is a chip with two separate devices inside, RTC clock and FRAM. This driver provides only RTC functionality. This chip is met in lots of custom boards with AT91SAMXXXX CPU I work with, is cheap and in no way better or worse than any other RTC on market. While it is mostly met on much smaller devices, I think it is great to have it supported in Linux. Signed-off-by: Sergey Lapin Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index 60f8afc..4949dc4 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -256,6 +256,17 @@ config RTC_DRV_S35390A This driver can also be built as a module. If so the module will be called rtc-s35390a. +config RTC_DRV_FM3130 + tristate "Ramtron FM3130" + help + If you say Y here you will get support for the + Ramtron FM3130 RTC chips. + Ramtron FM3130 is a chip with two separate devices inside, + RTC clock and FRAM. This driver provides only RTC functionality. + + This driver can also be built as a module. If so the module + will be called rtc-fm3130. + endif # I2C comment "SPI RTC drivers" diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index ebe871c..b6e14d5 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -31,6 +31,7 @@ obj-$(CONFIG_RTC_DRV_DS1553) += rtc-ds1553.o obj-$(CONFIG_RTC_DRV_DS1672) += rtc-ds1672.o obj-$(CONFIG_RTC_DRV_DS1742) += rtc-ds1742.o obj-$(CONFIG_RTC_DRV_EP93XX) += rtc-ep93xx.o +obj-$(CONFIG_RTC_DRV_FM3130) += rtc-fm3130.o obj-$(CONFIG_RTC_DRV_ISL1208) += rtc-isl1208.o obj-$(CONFIG_RTC_DRV_M41T80) += rtc-m41t80.o obj-$(CONFIG_RTC_DRV_M48T59) += rtc-m48t59.o @@ -41,6 +42,7 @@ obj-$(CONFIG_RTC_DRV_OMAP) += rtc-omap.o obj-$(CONFIG_RTC_DRV_PCF8563) += rtc-pcf8563.o obj-$(CONFIG_RTC_DRV_PCF8583) += rtc-pcf8583.o obj-$(CONFIG_RTC_DRV_PL031) += rtc-pl031.o +obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o obj-$(CONFIG_RTC_DRV_R9701) += rtc-r9701.o obj-$(CONFIG_RTC_DRV_RS5C313) += rtc-rs5c313.o obj-$(CONFIG_RTC_DRV_RS5C348) += rtc-rs5c348.o @@ -54,4 +56,3 @@ obj-$(CONFIG_RTC_DRV_TEST) += rtc-test.o obj-$(CONFIG_RTC_DRV_V3020) += rtc-v3020.o obj-$(CONFIG_RTC_DRV_VR41XX) += rtc-vr41xx.o obj-$(CONFIG_RTC_DRV_X1205) += rtc-x1205.o -obj-$(CONFIG_RTC_DRV_PPC) += rtc-ppc.o diff --git a/drivers/rtc/rtc-fm3130.c b/drivers/rtc/rtc-fm3130.c new file mode 100644 index 0000000..11644c8 --- /dev/null +++ b/drivers/rtc/rtc-fm3130.c @@ -0,0 +1,501 @@ +/* + * rtc-fm3130.c - RTC driver for Ramtron FM3130 I2C chip. + * + * Copyright (C) 2008 Sergey Lapin + * Based on ds1307 driver by James Chapman and David Brownell + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include + +#define FM3130_RTC_CONTROL (0x0) +#define FM3130_CAL_CONTROL (0x1) +#define FM3130_RTC_SECONDS (0x2) +#define FM3130_RTC_MINUTES (0x3) +#define FM3130_RTC_HOURS (0x4) +#define FM3130_RTC_DAY (0x5) +#define FM3130_RTC_DATE (0x6) +#define FM3130_RTC_MONTHS (0x7) +#define FM3130_RTC_YEARS (0x8) + +#define FM3130_ALARM_SECONDS (0x9) +#define FM3130_ALARM_MINUTES (0xa) +#define FM3130_ALARM_HOURS (0xb) +#define FM3130_ALARM_DATE (0xc) +#define FM3130_ALARM_MONTHS (0xd) +#define FM3130_ALARM_WP_CONTROL (0xe) + +#define FM3130_CAL_CONTROL_BIT_nOSCEN (1 << 7) /* Osciallator enabled */ +#define FM3130_RTC_CONTROL_BIT_LB (1 << 7) /* Low battery */ +#define FM3130_RTC_CONTROL_BIT_AF (1 << 6) /* Alarm flag */ +#define FM3130_RTC_CONTROL_BIT_CF (1 << 5) /* Century overflow */ +#define FM3130_RTC_CONTROL_BIT_POR (1 << 4) /* Power on reset */ +#define FM3130_RTC_CONTROL_BIT_AEN (1 << 3) /* Alarm enable */ +#define FM3130_RTC_CONTROL_BIT_CAL (1 << 2) /* Calibration mode */ +#define FM3130_RTC_CONTROL_BIT_WRITE (1 << 1) /* W=1 -> write mode W=0 normal */ +#define FM3130_RTC_CONTROL_BIT_READ (1 << 0) /* R=1 -> read mode R=0 normal */ + +#define FM3130_CLOCK_REGS 7 +#define FM3130_ALARM_REGS 5 + +struct fm3130 { + u8 reg_addr_time; + u8 reg_addr_alarm; + u8 regs[15]; + struct i2c_msg msg[4]; + struct i2c_client *client; + struct rtc_device *rtc; + int data_valid; + int alarm; +}; +static const struct i2c_device_id fm3130_id[] = { + { "fm3130-rtc", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, fm3130_id); + +#define FM3130_MODE_NORMAL 0 +#define FM3130_MODE_WRITE 1 +#define FM3130_MODE_READ 2 + +static void fm3130_rtc_mode(struct device *dev, int mode) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + switch (mode) { + case FM3130_MODE_NORMAL: + fm3130->regs[FM3130_RTC_CONTROL] &= + ~(FM3130_RTC_CONTROL_BIT_WRITE | + FM3130_RTC_CONTROL_BIT_READ); + break; + case FM3130_MODE_WRITE: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_WRITE; + break; + case FM3130_MODE_READ: + fm3130->regs[FM3130_RTC_CONTROL] |= FM3130_RTC_CONTROL_BIT_READ; + break; + default: + dev_dbg(dev, "invalid mode %d\n", mode); + break; + } + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_CONTROL, fm3130->regs[FM3130_RTC_CONTROL]); +} + +static int fm3130_get_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + + if (!fm3130->data_valid) { + /* We have invalid data in RTC, probably due + to battery faults or other problems. Return EIO + for now, it will allow us to set data later insted + of error during probing which disables device */ + return -EIO; + } + fm3130_rtc_mode(dev, FM3130_MODE_READ); + + /* read the RTC date and time registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + fm3130->msg, 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "read", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + t->tm_sec = BCD2BIN(fm3130->regs[FM3130_RTC_SECONDS] & 0x7f); + t->tm_min = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + tmp = fm3130->regs[FM3130_RTC_HOURS] & 0x3f; + t->tm_hour = BCD2BIN(tmp); + t->tm_wday = BCD2BIN(fm3130->regs[FM3130_RTC_DAY] & 0x07) - 1; + t->tm_mday = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + tmp = fm3130->regs[FM3130_RTC_MONTHS] & 0x1f; + t->tm_mon = BCD2BIN(tmp) - 1; + + /* assume 20YY not 19YY, and ignore CF bit */ + t->tm_year = BCD2BIN(fm3130->regs[FM3130_RTC_YEARS]) + 100; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* initial clock setting can be undefined */ + return rtc_valid_tm(t); +} + + +static int fm3130_set_time(struct device *dev, struct rtc_time *t) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp, i; + u8 *buf = fm3130->regs; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write", t->tm_sec, t->tm_min, + t->tm_hour, t->tm_mday, + t->tm_mon, t->tm_year, t->tm_wday); + + /* first register addr */ + buf[FM3130_RTC_SECONDS] = BIN2BCD(t->tm_sec); + buf[FM3130_RTC_MINUTES] = BIN2BCD(t->tm_min); + buf[FM3130_RTC_HOURS] = BIN2BCD(t->tm_hour); + buf[FM3130_RTC_DAY] = BIN2BCD(t->tm_wday + 1); + buf[FM3130_RTC_DATE] = BIN2BCD(t->tm_mday); + buf[FM3130_RTC_MONTHS] = BIN2BCD(t->tm_mon + 1); + + /* assume 20YY not 19YY */ + tmp = t->tm_year - 100; + buf[FM3130_RTC_YEARS] = BIN2BCD(tmp); + + dev_dbg(dev, "%s: %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x %02x\n", + "write", buf[0], buf[1], buf[2], buf[3], + buf[4], buf[5], buf[6], buf[7], + buf[8], buf[9], buf[0xa], buf[0xb], + buf[0xc], buf[0xd], buf[0xe]); + + fm3130_rtc_mode(dev, FM3130_MODE_WRITE); + + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_CLOCK_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_RTC_SECONDS + i, + fm3130->regs[FM3130_RTC_SECONDS + i]); + } + + fm3130_rtc_mode(dev, FM3130_MODE_NORMAL); + + /* We assume here that data are valid once written */ + if (!fm3130->data_valid) + fm3130->data_valid = 1; + return 0; +} + +static int fm3130_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + int tmp; + struct rtc_time *tm = &alrm->time; + /* read the RTC alarm registers all at once */ + tmp = i2c_transfer(to_i2c_adapter(fm3130->client->dev.parent), + &fm3130->msg[2], 2); + if (tmp != 2) { + dev_err(dev, "%s error %d\n", "read", tmp); + return -EIO; + } + dev_dbg(dev, "alarm read %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + + + tm->tm_sec = BCD2BIN(fm3130->regs[FM3130_ALARM_SECONDS] & 0x7F); + tm->tm_min = BCD2BIN(fm3130->regs[FM3130_ALARM_MINUTES] & 0x7F); + tm->tm_hour = BCD2BIN(fm3130->regs[FM3130_ALARM_HOURS] & 0x3F); + tm->tm_mday = BCD2BIN(fm3130->regs[FM3130_ALARM_DATE] & 0x3F); + tm->tm_mon = BCD2BIN(fm3130->regs[FM3130_ALARM_MONTHS] & 0x1F); + if (tm->tm_mon > 0) + tm->tm_mon -= 1; /* RTC is 1-12, tm_mon is 0-11 */ + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "read alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + return 0; +} + +static int fm3130_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) +{ + struct fm3130 *fm3130 = dev_get_drvdata(dev); + struct rtc_time *tm = &alrm->time; + int i; + + dev_dbg(dev, "%s secs=%d, mins=%d, " + "hours=%d, mday=%d, mon=%d, year=%d, wday=%d\n", + "write alarm", tm->tm_sec, tm->tm_min, + tm->tm_hour, tm->tm_mday, + tm->tm_mon, tm->tm_year, tm->tm_wday); + + if (tm->tm_sec != -1) + fm3130->regs[FM3130_ALARM_SECONDS] = + BIN2BCD(tm->tm_sec) | 0x80; + + if (tm->tm_min != -1) + fm3130->regs[FM3130_ALARM_MINUTES] = + BIN2BCD(tm->tm_min) | 0x80; + + if (tm->tm_hour != -1) + fm3130->regs[FM3130_ALARM_HOURS] = + BIN2BCD(tm->tm_hour) | 0x80; + + if (tm->tm_mday != -1) + fm3130->regs[FM3130_ALARM_DATE] = + BIN2BCD(tm->tm_mday) | 0x80; + + if (tm->tm_mon != -1) + fm3130->regs[FM3130_ALARM_MONTHS] = + BIN2BCD(tm->tm_mon + 1) | 0x80; + + dev_dbg(dev, "alarm write %02x %02x %02x %02x %02x\n", + fm3130->regs[FM3130_ALARM_SECONDS], + fm3130->regs[FM3130_ALARM_MINUTES], + fm3130->regs[FM3130_ALARM_HOURS], + fm3130->regs[FM3130_ALARM_DATE], + fm3130->regs[FM3130_ALARM_MONTHS]); + /* Writing time registers, we don't support multibyte transfers */ + for (i = 0; i < FM3130_ALARM_REGS; i++) { + i2c_smbus_write_byte_data(fm3130->client, + FM3130_ALARM_SECONDS + i, + fm3130->regs[FM3130_ALARM_SECONDS + i]); + } + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(fm3130->client, FM3130_RTC_CONTROL); + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + if (alrm->enabled) { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + (fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)) | + FM3130_RTC_CONTROL_BIT_AEN); + } else { + i2c_smbus_write_byte_data(fm3130->client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_AEN)); + } + return 0; +} + +static const struct rtc_class_ops fm3130_rtc_ops = { + .read_time = fm3130_get_time, + .set_time = fm3130_set_time, + .read_alarm = fm3130_read_alarm, + .set_alarm = fm3130_set_alarm, +}; + +static struct i2c_driver fm3130_driver; + +static int __devinit fm3130_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct fm3130 *fm3130; + int err = -ENODEV; + int tmp; + struct i2c_adapter *adapter = to_i2c_adapter(client->dev.parent); + + if (!i2c_check_functionality(adapter, + I2C_FUNC_I2C | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)) + return -EIO; + + fm3130 = kzalloc(sizeof(struct fm3130), GFP_KERNEL); + + if (!fm3130) + return -ENOMEM; + + fm3130->client = client; + i2c_set_clientdata(client, fm3130); + fm3130->reg_addr_time = FM3130_RTC_SECONDS; + fm3130->reg_addr_alarm = FM3130_ALARM_SECONDS; + + /* Messages to read time */ + fm3130->msg[0].addr = client->addr; + fm3130->msg[0].flags = 0; + fm3130->msg[0].len = 1; + fm3130->msg[0].buf = &fm3130->reg_addr_time; + + fm3130->msg[1].addr = client->addr; + fm3130->msg[1].flags = I2C_M_RD; + fm3130->msg[1].len = FM3130_CLOCK_REGS; + fm3130->msg[1].buf = &fm3130->regs[FM3130_RTC_SECONDS]; + + /* Messages to read alarm */ + fm3130->msg[2].addr = client->addr; + fm3130->msg[2].flags = 0; + fm3130->msg[2].len = 1; + fm3130->msg[2].buf = &fm3130->reg_addr_alarm; + + fm3130->msg[3].addr = client->addr; + fm3130->msg[3].flags = I2C_M_RD; + fm3130->msg[3].len = FM3130_ALARM_REGS; + fm3130->msg[3].buf = &fm3130->regs[FM3130_ALARM_SECONDS]; + + fm3130->data_valid = 0; + + tmp = i2c_transfer(adapter, fm3130->msg, 4); + if (tmp != 4) { + pr_debug("read error %d\n", tmp); + err = -EIO; + goto exit_free; + } + + fm3130->regs[FM3130_RTC_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_RTC_CONTROL); + fm3130->regs[FM3130_CAL_CONTROL] = + i2c_smbus_read_byte_data(client, FM3130_CAL_CONTROL); + + /* Checking for alarm */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_AF) { + fm3130->alarm = 1; + fm3130->regs[FM3130_RTC_CONTROL] &= ~FM3130_RTC_CONTROL_BIT_AF; + } + + /* Disabling calibration mode */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_CAL) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_CAL)); + dev_warn(&client->dev, "Disabling calibration mode!\n"); + + /* Disabling read and write modes */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_WRITE || + fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_READ) + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~(FM3130_RTC_CONTROL_BIT_READ | + FM3130_RTC_CONTROL_BIT_WRITE)); + dev_warn(&client->dev, "Disabling READ or WRITE mode!\n"); + + /* oscillator off? turn it on, so clock can tick. */ + if (fm3130->regs[FM3130_CAL_CONTROL] & FM3130_CAL_CONTROL_BIT_nOSCEN) + i2c_smbus_write_byte_data(client, FM3130_CAL_CONTROL, + fm3130->regs[FM3130_CAL_CONTROL] & + ~(FM3130_CAL_CONTROL_BIT_nOSCEN)); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_LB) + dev_warn(&client->dev, "Low battery!\n"); + + /* oscillator fault? clear flag, and warn */ + if (fm3130->regs[FM3130_RTC_CONTROL] & FM3130_RTC_CONTROL_BIT_POR) { + i2c_smbus_write_byte_data(client, FM3130_RTC_CONTROL, + fm3130->regs[FM3130_RTC_CONTROL] & + ~FM3130_RTC_CONTROL_BIT_POR); + dev_warn(&client->dev, "SET TIME!\n"); + } + /* ACS is controlled by alarm */ + i2c_smbus_write_byte_data(client, FM3130_ALARM_WP_CONTROL, 0x80); + + /* TODO */ + /* TODO need to sanity check alarm */ + tmp = fm3130->regs[FM3130_RTC_SECONDS]; + tmp = BCD2BIN(tmp & 0x7f); + if (tmp > 60) + goto exit_bad; + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MINUTES] & 0x7f); + if (tmp > 60) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_DATE] & 0x3f); + if (tmp == 0 || tmp > 31) + goto exit_bad; + + tmp = BCD2BIN(fm3130->regs[FM3130_RTC_MONTHS] & 0x1f); + if (tmp == 0 || tmp > 12) + goto exit_bad; + + tmp = fm3130->regs[FM3130_RTC_HOURS]; + + fm3130->data_valid = 1; + +exit_bad: + if (!fm3130->data_valid) + dev_dbg(&client->dev, + "%s: %02x %02x %02x %02x %02x %02x %02x %02x" + "%02x %02x %02x %02x %02x %02x %02x\n", + "bogus registers", + fm3130->regs[0], fm3130->regs[1], + fm3130->regs[2], fm3130->regs[3], + fm3130->regs[4], fm3130->regs[5], + fm3130->regs[6], fm3130->regs[7], + fm3130->regs[8], fm3130->regs[9], + fm3130->regs[0xa], fm3130->regs[0xb], + fm3130->regs[0xc], fm3130->regs[0xd], + fm3130->regs[0xe]); + + /* We won't bail out here because we just got invalid data. + Time setting from u-boot doesn't work anyway */ + fm3130->rtc = rtc_device_register(client->name, &client->dev, + &fm3130_rtc_ops, THIS_MODULE); + if (IS_ERR(fm3130->rtc)) { + err = PTR_ERR(fm3130->rtc); + dev_err(&client->dev, + "unable to register the class device\n"); + goto exit_free; + } + return 0; +exit_free: + kfree(fm3130); + return err; +} + +static int __devexit fm3130_remove(struct i2c_client *client) +{ + struct fm3130 *fm3130 = i2c_get_clientdata(client); + + rtc_device_unregister(fm3130->rtc); + kfree(fm3130); + return 0; +} + +static struct i2c_driver fm3130_driver = { + .driver = { + .name = "rtc-fm3130", + .owner = THIS_MODULE, + }, + .probe = fm3130_probe, + .remove = __devexit_p(fm3130_remove), + .id_table = fm3130_id, +}; + +static int __init fm3130_init(void) +{ + return i2c_add_driver(&fm3130_driver); +} +module_init(fm3130_init); + +static void __exit fm3130_exit(void) +{ + i2c_del_driver(&fm3130_driver); +} +module_exit(fm3130_exit); + +MODULE_DESCRIPTION("RTC driver for FM3130"); +MODULE_AUTHOR("Sergey Lapin "); +MODULE_LICENSE("GPL"); + -- cgit v0.10.2 From 41ee2ff404ec76194315aeed57ac973b010abe1d Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Fri, 13 Jun 2008 15:04:40 +1000 Subject: drm: use drms ioctl cmd not what we get passed from userspace. This enforces us to use the drm ioctl types so read/write works correctly and not believe what userspace tells us. It does this hopefully without breaking the drm api. Fixes bug from thread: BUG: unable to handle kernel NULL pointer dereference (drm_getunique) Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index fc54140..22957ac1 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -475,6 +475,8 @@ int drm_ioctl(struct inode *inode, struct file *filp, else goto err_i1; + /* Do not trust userspace, use our own definition */ + cmd = ioctl->cmd; func = ioctl->func; /* is there a local override? */ if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl) -- cgit v0.10.2 From b554305905d9bc2184b424aa67712119d5c9fb99 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 13 Jun 2008 15:06:31 +1000 Subject: drm: the sg alloc ioctl should write back the handle to userspace Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm.h b/drivers/char/drm/drm.h index 3a05c6d..38d3c6b 100644 --- a/drivers/char/drm/drm.h +++ b/drivers/char/drm/drm.h @@ -628,7 +628,7 @@ struct drm_set_version { #define DRM_IOCTL_AGP_BIND DRM_IOW( 0x36, struct drm_agp_binding) #define DRM_IOCTL_AGP_UNBIND DRM_IOW( 0x37, struct drm_agp_binding) -#define DRM_IOCTL_SG_ALLOC DRM_IOW( 0x38, struct drm_scatter_gather) +#define DRM_IOCTL_SG_ALLOC DRM_IOWR(0x38, struct drm_scatter_gather) #define DRM_IOCTL_SG_FREE DRM_IOW( 0x39, struct drm_scatter_gather) #define DRM_IOCTL_WAIT_VBLANK DRM_IOWR(0x3a, union drm_wait_vblank) -- cgit v0.10.2 From e297d99e103f951a71fcb1534f1ff3480dd3a851 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 10 Jun 2008 00:13:04 +0900 Subject: ahci: workarounds for mcp65 MCP65 ahci can do NCQ but doesn't set the CAP bit and rev A0 and A1 can't do MSI but have MSI capability. Implement AHCI_HFLAG_YES_NCQ and apply appropriate workarounds. Signed-off-by: Tejun Heo Cc: Peer Chen Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 544b7d6..1c62b8e 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -89,6 +89,7 @@ enum { board_ahci_sb600 = 3, board_ahci_mv = 4, board_ahci_sb700 = 5, + board_ahci_mcp65 = 6, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -190,6 +191,7 @@ enum { AHCI_HFLAG_NO_PMP = (1 << 6), /* no PMP */ AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */ AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */ + AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */ /* ap->flags bits */ @@ -384,6 +386,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_mcp65 */ + { + AHCI_HFLAGS (AHCI_HFLAG_YES_NCQ), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -438,14 +448,14 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(VIA, 0x6287), board_ahci_vt8251 }, /* VIA VT8251 */ /* NVIDIA */ - { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci }, /* MCP65 */ - { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x044f), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045c), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045d), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045e), board_ahci_mcp65 }, /* MCP65 */ + { PCI_VDEVICE(NVIDIA, 0x045f), board_ahci_mcp65 }, /* MCP65 */ { PCI_VDEVICE(NVIDIA, 0x0550), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0551), board_ahci }, /* MCP67 */ { PCI_VDEVICE(NVIDIA, 0x0552), board_ahci }, /* MCP67 */ @@ -624,6 +634,12 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_NCQ; } + if (!(cap & HOST_CAP_NCQ) && (hpriv->flags & AHCI_HFLAG_YES_NCQ)) { + dev_printk(KERN_INFO, &pdev->dev, + "controller can do NCQ, turning on CAP_NCQ\n"); + cap |= HOST_CAP_NCQ; + } + if ((cap & HOST_CAP_PMP) && (hpriv->flags & AHCI_HFLAG_NO_PMP)) { dev_printk(KERN_INFO, &pdev->dev, "controller can't do PMP, turning off CAP_PMP\n"); @@ -2118,7 +2134,8 @@ static void ahci_p5wdh_workaround(struct ata_host *host) static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; - struct ata_port_info pi = ahci_port_info[ent->driver_data]; + unsigned int board_id = ent->driver_data; + struct ata_port_info pi = ahci_port_info[board_id]; const struct ata_port_info *ppi[] = { &pi, NULL }; struct device *dev = &pdev->dev; struct ahci_host_priv *hpriv; @@ -2167,6 +2184,11 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return -ENOMEM; hpriv->flags |= (unsigned long)pi.private_data; + /* MCP65 revision A1 and A2 can't do MSI */ + if (board_id == board_ahci_mcp65 && + (pdev->revision == 0xa1 || pdev->revision == 0xa2)) + hpriv->flags |= AHCI_HFLAG_NO_MSI; + if ((hpriv->flags & AHCI_HFLAG_NO_MSI) || pci_enable_msi(pdev)) pci_intx(pdev, 1); -- cgit v0.10.2 From bd17243a84632465f5403bc9eb8b4831bd67e582 Mon Sep 17 00:00:00 2001 From: Shane Huang Date: Tue, 10 Jun 2008 15:52:04 +0800 Subject: ahci: Workaround HW bug for SB600/700 SATA controller PMP support There is one bug in ATI SATA PMP of SB600 and SB700 old revision, which leads to soft reset failure. This patch can fix the bug. Signed-off-by: Shane Huang Acked-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 1c62b8e..966ab40 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -255,6 +255,8 @@ static void ahci_pmp_attach(struct ata_port *ap); static void ahci_pmp_detach(struct ata_port *ap); static int ahci_softreset(struct ata_link *link, unsigned int *class, unsigned long deadline); +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline); static int ahci_vt8251_hardreset(struct ata_link *link, unsigned int *class, @@ -331,6 +333,12 @@ static struct ata_port_operations ahci_p5wdh_ops = { .hardreset = ahci_p5wdh_hardreset, }; +static struct ata_port_operations ahci_sb600_ops = { + .inherits = &ahci_ops, + .softreset = ahci_sb600_softreset, + .pmp_softreset = ahci_sb600_softreset, +}; + #define AHCI_HFLAGS(flags) .private_data = (void *)(flags) static const struct ata_port_info ahci_port_info[] = { @@ -361,11 +369,11 @@ static const struct ata_port_info ahci_port_info[] = { { AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | AHCI_HFLAG_32BIT_ONLY | AHCI_HFLAG_NO_MSI | - AHCI_HFLAG_SECT255 | AHCI_HFLAG_NO_PMP), + AHCI_HFLAG_SECT255), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mv */ { @@ -379,12 +387,11 @@ static const struct ata_port_info ahci_port_info[] = { }, /* board_ahci_sb700 */ { - AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL | - AHCI_HFLAG_NO_PMP), + AHCI_HFLAGS (AHCI_HFLAG_IGN_SERR_INTERNAL), .flags = AHCI_FLAG_COMMON, .pio_mask = 0x1f, /* pio0-4 */ .udma_mask = ATA_UDMA6, - .port_ops = &ahci_ops, + .port_ops = &ahci_sb600_ops, }, /* board_ahci_mcp65 */ { @@ -1278,19 +1285,11 @@ static int ahci_exec_polled_cmd(struct ata_port *ap, int pmp, return 0; } -static int ahci_check_ready(struct ata_link *link) -{ - void __iomem *port_mmio = ahci_port_base(link->ap); - u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; - - return ata_check_ready(status); -} - -static int ahci_softreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) +static int ahci_do_softreset(struct ata_link *link, unsigned int *class, + int pmp, unsigned long deadline, + int (*check_ready)(struct ata_link *link)) { struct ata_port *ap = link->ap; - int pmp = sata_srst_pmp(link); const char *reason = NULL; unsigned long now, msecs; struct ata_taskfile tf; @@ -1328,7 +1327,7 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, ahci_exec_polled_cmd(ap, pmp, &tf, 0, 0, 0); /* wait for link to become ready */ - rc = ata_wait_after_reset(link, deadline, ahci_check_ready); + rc = ata_wait_after_reset(link, deadline, check_ready); /* link occupied, -ENODEV too is an error */ if (rc) { reason = "device not ready"; @@ -1344,6 +1343,72 @@ static int ahci_softreset(struct ata_link *link, unsigned int *class, return rc; } +static int ahci_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + + return ata_check_ready(status); +} + +static int ahci_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + int pmp = sata_srst_pmp(link); + + DPRINTK("ENTER\n"); + + return ahci_do_softreset(link, class, pmp, deadline, ahci_check_ready); +} + +static int ahci_sb600_check_ready(struct ata_link *link) +{ + void __iomem *port_mmio = ahci_port_base(link->ap); + u8 status = readl(port_mmio + PORT_TFDATA) & 0xFF; + u32 irq_status = readl(port_mmio + PORT_IRQ_STAT); + + /* + * There is no need to check TFDATA if BAD PMP is found due to HW bug, + * which can save timeout delay. + */ + if (irq_status & PORT_IRQ_BAD_PMP) + return -EIO; + + return ata_check_ready(status); +} + +static int ahci_sb600_softreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + struct ata_port *ap = link->ap; + void __iomem *port_mmio = ahci_port_base(ap); + int pmp = sata_srst_pmp(link); + int rc; + u32 irq_sts; + + DPRINTK("ENTER\n"); + + rc = ahci_do_softreset(link, class, pmp, deadline, + ahci_sb600_check_ready); + + /* + * Soft reset fails on some ATI chips with IPMS set when PMP + * is enabled but SATA HDD/ODD is connected to SATA port, + * do soft reset again to port 0. + */ + if (rc == -EIO) { + irq_sts = readl(port_mmio + PORT_IRQ_STAT); + if (irq_sts & PORT_IRQ_BAD_PMP) { + ata_link_printk(link, KERN_WARNING, + "failed due to HW bug, retry pmp=0\n"); + rc = ahci_do_softreset(link, class, 0, deadline, + ahci_check_ready); + } + } + + return rc; +} + static int ahci_hardreset(struct ata_link *link, unsigned int *class, unsigned long deadline) { -- cgit v0.10.2 From dfcf753bd3fb09f336659d07b1c48db7e62772e0 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 22 May 2008 14:36:31 -0400 Subject: Revert "parisc: fix trivial section name warnings" This reverts commit bd3bb8c15b9a80dbddfb7905b237a4a11a4725b4. Signed-off-by: Kyle McMartin diff --git a/arch/parisc/hpux/gate.S b/arch/parisc/hpux/gate.S index f0b18ce..38a1c1b 100644 --- a/arch/parisc/hpux/gate.S +++ b/arch/parisc/hpux/gate.S @@ -13,10 +13,9 @@ #include #include #include -#include .level LEVEL - __HEAD + .text .import hpux_call_table .import hpux_syscall_exit,code diff --git a/arch/parisc/hpux/wrappers.S b/arch/parisc/hpux/wrappers.S index ccd3a50..58c53c8 100644 --- a/arch/parisc/hpux/wrappers.S +++ b/arch/parisc/hpux/wrappers.S @@ -28,10 +28,9 @@ #include #include #include -#include .level LEVEL - __HEAD + .text /* These should probably go in a header file somewhere. * They are duplicated in kernel/wrappers.S diff --git a/arch/parisc/kernel/entry.S b/arch/parisc/kernel/entry.S index 5d08374..d1fa4ed 100644 --- a/arch/parisc/kernel/entry.S +++ b/arch/parisc/kernel/entry.S @@ -38,7 +38,6 @@ #include #include -#include #ifdef CONFIG_64BIT .level 2.0w @@ -622,7 +621,7 @@ * the static part of the kernel address space. */ - __HEAD + .text .align PAGE_SIZE diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index 5680a2c..ec2482d 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -32,7 +32,7 @@ ENTRY(boot_args) .word 0 /* arg3 */ END(boot_args) - __HEAD + .section .text.head .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ diff --git a/arch/parisc/kernel/hpmc.S b/arch/parisc/kernel/hpmc.S index 068322e..2cbf13b 100644 --- a/arch/parisc/kernel/hpmc.S +++ b/arch/parisc/kernel/hpmc.S @@ -47,7 +47,6 @@ #include #include -#include /* * stack for os_hpmc, the HPMC handler. @@ -77,7 +76,7 @@ ENTRY(hpmc_pim_data) .block HPMC_PIM_DATA_SIZE END(hpmc_pim_data) - __HEAD + .text .import intr_save, code ENTRY(os_hpmc) diff --git a/arch/parisc/kernel/pacache.S b/arch/parisc/kernel/pacache.S index e3246a5..09b77b2 100644 --- a/arch/parisc/kernel/pacache.S +++ b/arch/parisc/kernel/pacache.S @@ -37,9 +37,8 @@ #include #include #include -#include - __HEAD + .text .align 128 ENTRY(flush_tlb_all_local) diff --git a/arch/parisc/kernel/perf_asm.S b/arch/parisc/kernel/perf_asm.S index d411dfb..fa6ea99 100644 --- a/arch/parisc/kernel/perf_asm.S +++ b/arch/parisc/kernel/perf_asm.S @@ -43,7 +43,7 @@ ; The coprocessor only needs to be enabled when ; starting/stopping the coprocessor with the pmenb/pmdis. ; - __HEAD + .text ENTRY(perf_intrigue_enable_perf_counters) .proc diff --git a/arch/parisc/kernel/real2.S b/arch/parisc/kernel/real2.S index 47fbdae..7a92695 100644 --- a/arch/parisc/kernel/real2.S +++ b/arch/parisc/kernel/real2.S @@ -12,7 +12,6 @@ #include #include -#include .section .bss .export real_stack @@ -40,7 +39,7 @@ save_cr_end: /************************ 32-bit real-mode calls ***********************/ /* This can be called in both narrow and wide kernels */ - __HEAD + .text /* unsigned long real32_call_asm(unsigned int *sp, * unsigned int *arg0p, @@ -114,7 +113,7 @@ ENDPROC(real32_call_asm) # define PUSH_CR(r, where) mfctl r, %r1 ! STREG,ma %r1, REG_SZ(where) # define POP_CR(r, where) LDREG,mb -REG_SZ(where), %r1 ! mtctl %r1, r - __HEAD + .text save_control_regs: load32 PA(save_cr_space), %r28 PUSH_CR(%cr24, %r28) @@ -146,7 +145,7 @@ restore_control_regs: /* rfi_virt2real() and rfi_real2virt() could perhaps be adapted for * more general-purpose use by the several places which need RFIs */ - __HEAD + .text .align 128 rfi_virt2real: /* switch to real mode... */ @@ -181,7 +180,7 @@ rfi_v2r_1: bv 0(%r2) nop - __HEAD + .text .align 128 rfi_real2virt: rsm PSW_SM_I,%r0 @@ -219,7 +218,7 @@ rfi_r2v_1: /************************ 64-bit real-mode calls ***********************/ /* This is only usable in wide kernels right now and will probably stay so */ - __HEAD + .text /* unsigned long real64_call_asm(unsigned long *sp, * unsigned long *arg0p, * unsigned long fn) @@ -277,7 +276,7 @@ ENDPROC(real64_call_asm) #endif - __HEAD + .text /* http://lists.parisc-linux.org/hypermail/parisc-linux/10916.html ** GCC 3.3 and later has a new function in libgcc.a for ** comparing function pointers. diff --git a/arch/parisc/kernel/syscall.S b/arch/parisc/kernel/syscall.S index ae509d8..69b6eeb 100644 --- a/arch/parisc/kernel/syscall.S +++ b/arch/parisc/kernel/syscall.S @@ -17,7 +17,6 @@ #include #include -#include /* We fill the empty parts of the gateway page with * something that will kill the kernel or a @@ -27,7 +26,7 @@ .level LEVEL - __HEAD + .text .import syscall_exit,code .import syscall_exit_rfi,code @@ -637,7 +636,7 @@ END(sys_call_table64) All light-weight-syscall atomic operations will use this set of locks */ - .section .data, "aw" + .section .data .align PAGE_SIZE ENTRY(lws_lock_start) /* lws locks */ diff --git a/arch/parisc/lib/fixup.S b/arch/parisc/lib/fixup.S index 4821ad6..d172d42 100644 --- a/arch/parisc/lib/fixup.S +++ b/arch/parisc/lib/fixup.S @@ -23,7 +23,6 @@ #include #include #include -#include #ifdef CONFIG_SMP .macro get_fault_ip t1 t2 @@ -56,7 +55,7 @@ .level LEVEL - __HEAD + .text .section .fixup, "ax" /* get_user() fixups, store -EFAULT in r8, and 0 in r9 */ diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S index b0d8853..1bd23cc 100644 --- a/arch/parisc/lib/lusercopy.S +++ b/arch/parisc/lib/lusercopy.S @@ -33,12 +33,11 @@ */ + .text + #include #include #include -#include - - __HEAD /* * get_sr gets the appropriate space value into -- cgit v0.10.2 From 1138a72cd96857d1d5928c0c8c83d8b8995eeb38 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Thu, 22 May 2008 14:38:26 -0400 Subject: parisc: move head.S to head.text section And explicitly list it in vmlinux.lds... Signed-off-by: Kyle McMartin diff --git a/arch/parisc/kernel/head.S b/arch/parisc/kernel/head.S index ec2482d..a84e31e 100644 --- a/arch/parisc/kernel/head.S +++ b/arch/parisc/kernel/head.S @@ -32,7 +32,8 @@ ENTRY(boot_args) .word 0 /* arg3 */ END(boot_args) - .section .text.head + __HEAD + .align 4 .import init_thread_union,data .import fault_vector_20,code /* IVA parisc 2.0 32 bit */ diff --git a/arch/parisc/kernel/vmlinux.lds.S b/arch/parisc/kernel/vmlinux.lds.S index 50b4a3a..2e516b8 100644 --- a/arch/parisc/kernel/vmlinux.lds.S +++ b/arch/parisc/kernel/vmlinux.lds.S @@ -50,6 +50,7 @@ SECTIONS _text = .; /* Text and read-only data */ .text ALIGN(16) : { + HEAD_TEXT TEXT_TEXT SCHED_TEXT LOCK_TEXT -- cgit v0.10.2 From db51d92b90193cf69b2bcc2874fd0b267fd3e710 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 26 May 2008 01:49:01 -0400 Subject: parisc: export copy_user_page_asm Needed by fuse (via copy_highpage). Signed-off-by: Kyle McMartin diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c index 5b7fc4a..0eecfbb 100644 --- a/arch/parisc/kernel/parisc_ksyms.c +++ b/arch/parisc/kernel/parisc_ksyms.c @@ -152,3 +152,6 @@ EXPORT_SYMBOL($$dyncall); EXPORT_SYMBOL(node_data); EXPORT_SYMBOL(pfnnid_map); #endif + +/* from pacache.S -- needed for copy_page */ +EXPORT_SYMBOL(copy_user_page_asm); -- cgit v0.10.2 From 22febf1f372496d74534be32b6b5edcee7fb7cc5 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Mon, 26 May 2008 01:54:35 -0400 Subject: parisc: export empty_zero_page Needed by ext4 when built as a module. Signed-off-by: Kyle McMartin diff --git a/arch/parisc/mm/init.c b/arch/parisc/mm/init.c index 78fe252..ce0da68 100644 --- a/arch/parisc/mm/init.c +++ b/arch/parisc/mm/init.c @@ -547,6 +547,7 @@ void __init mem_init(void) } unsigned long *empty_zero_page __read_mostly; +EXPORT_SYMBOL(empty_zero_page); void show_mem(void) { -- cgit v0.10.2 From f4441b62d46e7033e907dfd6a8bb0b75b5519e88 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Tue, 27 May 2008 01:56:29 -0400 Subject: parisc: fix off by one in setup_sigcontext32 Thankfully, the values were irrelevant... Spotted by newer gcc. Signed-off-by: Kyle McMartin diff --git a/arch/parisc/kernel/signal32.c b/arch/parisc/kernel/signal32.c index db94aff..fb59852 100644 --- a/arch/parisc/kernel/signal32.c +++ b/arch/parisc/kernel/signal32.c @@ -289,7 +289,7 @@ setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __ &sc->sc_iaoq[0], compat_reg); /* Store upper half */ - compat_reg = (compat_uint_t)(regs->gr[32] >> 32); + compat_reg = (compat_uint_t)(regs->gr[31] >> 32); err |= __put_user(compat_reg, &rf->rf_iaoq[0]); DBG(2,"setup_sigcontext32: upper half iaoq[0] = %#x\n", compat_reg); @@ -299,7 +299,7 @@ setup_sigcontext32(struct compat_sigcontext __user *sc, struct compat_regfile __ DBG(2,"setup_sigcontext32: sc->sc_iaoq[1] = %p <= %#x\n", &sc->sc_iaoq[1], compat_reg); /* Store upper half */ - compat_reg = (compat_uint_t)((regs->gr[32]+4) >> 32); + compat_reg = (compat_uint_t)((regs->gr[31]+4) >> 32); err |= __put_user(compat_reg, &rf->rf_iaoq[1]); DBG(2,"setup_sigcontext32: upper half iaoq[1] = %#x\n", compat_reg); -- cgit v0.10.2 From e374d17cd74ec5967f81e2b0c67ec3219a2bbbcc Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Sat, 31 May 2008 12:15:42 -0400 Subject: parisc: fix miscompilation of ip_fast_csum with gcc >= 4.3 ip_fast_csum needs an asm "memory" clobber, otherwise the aggressive optimizations in gcc-4.3 cause it to be miscompiled. Signed-off-by: Kyle McMartin diff --git a/include/asm-parisc/checksum.h b/include/asm-parisc/checksum.h index cc3ec1b..e9639cc 100644 --- a/include/asm-parisc/checksum.h +++ b/include/asm-parisc/checksum.h @@ -65,7 +65,7 @@ static inline __sum16 ip_fast_csum(const void *iph, unsigned int ihl) "2:\n" : "=r" (sum), "=r" (iph), "=r" (ihl) : "1" (iph), "2" (ihl) - : "r19", "r20", "r21" ); + : "r19", "r20", "r21", "memory"); return (__force __sum16)sum; } -- cgit v0.10.2 From 42a5a8a60a093c359987fd884aec99b9d7f4c084 Mon Sep 17 00:00:00 2001 From: Kyle McMartin Date: Fri, 6 Jun 2008 17:16:17 -0400 Subject: parisc: update my email address Signed-off-by: Kyle McMartin diff --git a/MAINTAINERS b/MAINTAINERS index 9d43042..01605a9 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -274,7 +274,7 @@ S: Maintained AD1889 ALSA SOUND DRIVER P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca P: Thibaut Varene M: T-Bone@parisc-linux.org W: http://wiki.parisc-linux.org/AD1889 @@ -1827,7 +1827,7 @@ S: Maintained HARMONY SOUND DRIVER P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca L: linux-parisc@vger.kernel.org S: Maintained @@ -3120,7 +3120,7 @@ S: Maintained PARISC ARCHITECTURE P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca P: Matthew Wilcox M: matthew@wil.cx P: Grant Grundler @@ -4023,7 +4023,7 @@ TULIP NETWORK DRIVERS P: Grant Grundler M: grundler@parisc-linux.org P: Kyle McMartin -M: kyle@parisc-linux.org +M: kyle@mcmartin.ca L: netdev@vger.kernel.org S: Maintained -- cgit v0.10.2 From edfa78b2ba651782d70be6d1fef214e21a26d8cb Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Tue, 3 Jun 2008 20:29:50 +0200 Subject: rt2x00: Don't kill guardian_urb when it wasn't created This fixes a "BUG: unable to handle kernel paging request" bug in rt73usb which was caused by killing the guardian_urb while it had never been allocated for rt73usb. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00usb.c b/drivers/net/wireless/rt2x00/rt2x00usb.c index 5a33167..e5ceae8 100644 --- a/drivers/net/wireless/rt2x00/rt2x00usb.c +++ b/drivers/net/wireless/rt2x00/rt2x00usb.c @@ -362,6 +362,12 @@ void rt2x00usb_disable_radio(struct rt2x00_dev *rt2x00dev) } } + /* + * Kill guardian urb (if required by driver). + */ + if (!test_bit(DRIVER_REQUIRE_BEACON_GUARD, &rt2x00dev->flags)) + return; + for (i = 0; i < rt2x00dev->bcn->limit; i++) { priv_bcn = rt2x00dev->bcn->entries[i].priv_data; usb_kill_urb(priv_bcn->urb); -- cgit v0.10.2 From 051c256f672efa356a4cda1841132dbc86541090 Mon Sep 17 00:00:00 2001 From: Gertjan van Wingerde Date: Tue, 3 Jun 2008 20:29:47 +0200 Subject: rt2x00: Restrict DMA to 32-bit addresses. None of the rt2x00 PCI devices support 64-bit DMA addresses (they all only accept 32-bit buffer addresses). Hence it makes no sense to try to enable 64-bit DMA addresses. Only try to enable 32-bit DMA addresses. Signed-off-by: Gertjan van Wingerde Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00pci.c b/drivers/net/wireless/rt2x00/rt2x00pci.c index 971af25..60893de 100644 --- a/drivers/net/wireless/rt2x00/rt2x00pci.c +++ b/drivers/net/wireless/rt2x00/rt2x00pci.c @@ -412,8 +412,7 @@ int rt2x00pci_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) if (pci_set_mwi(pci_dev)) ERROR_PROBE("MWI not available.\n"); - if (pci_set_dma_mask(pci_dev, DMA_64BIT_MASK) && - pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { + if (pci_set_dma_mask(pci_dev, DMA_32BIT_MASK)) { ERROR_PROBE("PCI DMA not supported.\n"); retval = -EIO; goto exit_disable_device; -- cgit v0.10.2 From 028118a5f09a9c807e6b43e2231efdff9f224c74 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 12 Jun 2008 11:58:56 +0200 Subject: b43: Fix possible NULL pointer dereference in DMA code This fixes a possible NULL pointer dereference in an error path of the DMA allocation error checking code. This is also necessary for a future DMA API change that is on its way into the mainline kernel that adds an additional dev parameter to dma_mapping_error(). This patch moves the whole struct b43_dmaring struct initialization right before any DMA allocation operation. Reported-by: Miles Lane Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/dma.c b/drivers/net/wireless/b43/dma.c index 6dcbb3c..e23f2f1 100644 --- a/drivers/net/wireless/b43/dma.c +++ b/drivers/net/wireless/b43/dma.c @@ -795,24 +795,49 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, { struct b43_dmaring *ring; int err; - int nr_slots; dma_addr_t dma_test; ring = kzalloc(sizeof(*ring), GFP_KERNEL); if (!ring) goto out; - ring->type = type; - nr_slots = B43_RXRING_SLOTS; + ring->nr_slots = B43_RXRING_SLOTS; if (for_tx) - nr_slots = B43_TXRING_SLOTS; + ring->nr_slots = B43_TXRING_SLOTS; - ring->meta = kcalloc(nr_slots, sizeof(struct b43_dmadesc_meta), + ring->meta = kcalloc(ring->nr_slots, sizeof(struct b43_dmadesc_meta), GFP_KERNEL); if (!ring->meta) goto err_kfree_ring; + + ring->type = type; + ring->dev = dev; + ring->mmio_base = b43_dmacontroller_base(type, controller_index); + ring->index = controller_index; + if (type == B43_DMA_64BIT) + ring->ops = &dma64_ops; + else + ring->ops = &dma32_ops; if (for_tx) { - ring->txhdr_cache = kcalloc(nr_slots, + ring->tx = 1; + ring->current_slot = -1; + } else { + if (ring->index == 0) { + ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE; + ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET; + } else if (ring->index == 3) { + ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE; + ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET; + } else + B43_WARN_ON(1); + } + spin_lock_init(&ring->lock); +#ifdef CONFIG_B43_DEBUG + ring->last_injected_overflow = jiffies; +#endif + + if (for_tx) { + ring->txhdr_cache = kcalloc(ring->nr_slots, b43_txhdr_size(dev), GFP_KERNEL); if (!ring->txhdr_cache) @@ -828,7 +853,7 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, b43_txhdr_size(dev), 1)) { /* ugh realloc */ kfree(ring->txhdr_cache); - ring->txhdr_cache = kcalloc(nr_slots, + ring->txhdr_cache = kcalloc(ring->nr_slots, b43_txhdr_size(dev), GFP_KERNEL | GFP_DMA); if (!ring->txhdr_cache) @@ -853,32 +878,6 @@ struct b43_dmaring *b43_setup_dmaring(struct b43_wldev *dev, DMA_TO_DEVICE); } - ring->dev = dev; - ring->nr_slots = nr_slots; - ring->mmio_base = b43_dmacontroller_base(type, controller_index); - ring->index = controller_index; - if (type == B43_DMA_64BIT) - ring->ops = &dma64_ops; - else - ring->ops = &dma32_ops; - if (for_tx) { - ring->tx = 1; - ring->current_slot = -1; - } else { - if (ring->index == 0) { - ring->rx_buffersize = B43_DMA0_RX_BUFFERSIZE; - ring->frameoffset = B43_DMA0_RX_FRAMEOFFSET; - } else if (ring->index == 3) { - ring->rx_buffersize = B43_DMA3_RX_BUFFERSIZE; - ring->frameoffset = B43_DMA3_RX_FRAMEOFFSET; - } else - B43_WARN_ON(1); - } - spin_lock_init(&ring->lock); -#ifdef CONFIG_B43_DEBUG - ring->last_injected_overflow = jiffies; -#endif - err = alloc_ringmemory(ring); if (err) goto err_kfree_txhdr_cache; -- cgit v0.10.2 From 98a3b2fe435ae76170936c14f5c9e6a87548e3ef Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 12 Jun 2008 12:36:29 +0200 Subject: b43: Fix noise calculation WARN_ON This removes a WARN_ON that is responsible for the following koops: http://www.kerneloops.org/searchweek.php?search=b43_generate_noise_sample The comment in the patch describes why it's safe to simply remove the check. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h index dfa4bdd..d3db298 100644 --- a/drivers/net/wireless/b43/b43.h +++ b/drivers/net/wireless/b43/b43.h @@ -630,7 +630,6 @@ struct b43_pio { /* Context information for a noise calculation (Link Quality). */ struct b43_noise_calculation { - u8 channel_at_start; bool calculation_running; u8 nr_samples; s8 samples[8][4]; diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 6c3d9ea..fa4b0d8 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1145,7 +1145,6 @@ static void b43_generate_noise_sample(struct b43_wldev *dev) b43_jssi_write(dev, 0x7F7F7F7F); b43_write32(dev, B43_MMIO_MACCMD, b43_read32(dev, B43_MMIO_MACCMD) | B43_MACCMD_BGNOISE); - B43_WARN_ON(dev->noisecalc.channel_at_start != dev->phy.channel); } static void b43_calculate_link_quality(struct b43_wldev *dev) @@ -1154,7 +1153,6 @@ static void b43_calculate_link_quality(struct b43_wldev *dev) if (dev->noisecalc.calculation_running) return; - dev->noisecalc.channel_at_start = dev->phy.channel; dev->noisecalc.calculation_running = 1; dev->noisecalc.nr_samples = 0; @@ -1171,9 +1169,16 @@ static void handle_irq_noise(struct b43_wldev *dev) /* Bottom half of Link Quality calculation. */ + /* Possible race condition: It might be possible that the user + * changed to a different channel in the meantime since we + * started the calculation. We ignore that fact, since it's + * not really that much of a problem. The background noise is + * an estimation only anyway. Slightly wrong results will get damped + * by the averaging of the 8 sample rounds. Additionally the + * value is shortlived. So it will be replaced by the next noise + * calculation round soon. */ + B43_WARN_ON(!dev->noisecalc.calculation_running); - if (dev->noisecalc.channel_at_start != phy->channel) - goto drop_calculation; *((__le32 *)noise) = cpu_to_le32(b43_jssi_read(dev)); if (noise[0] == 0x7F || noise[1] == 0x7F || noise[2] == 0x7F || noise[3] == 0x7F) @@ -1214,11 +1219,10 @@ static void handle_irq_noise(struct b43_wldev *dev) average -= 48; dev->stats.link_noise = average; - drop_calculation: dev->noisecalc.calculation_running = 0; return; } - generate_new: +generate_new: b43_generate_noise_sample(dev); } -- cgit v0.10.2 From e76328e4a8260707fbc29c99773fb5ba4627096c Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 11 Jun 2008 12:57:58 -0700 Subject: rt2x00: INPUT build failure Config symbols that select RFKILL need to depend on INPUT so that undefined symbols are not used in the build. This patch fixes the input_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index ab1029e..23abef9 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -32,6 +32,7 @@ config RT2X00_LIB_FIRMWARE config RT2X00_LIB_RFKILL boolean depends on RT2X00_LIB + depends on INPUT select RFKILL select INPUT_POLLDEV @@ -51,7 +52,7 @@ config RT2400PCI config RT2400PCI_RFKILL bool "RT2400 rfkill support" - depends on RT2400PCI + depends on RT2400PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2400 devices that feature a @@ -78,7 +79,7 @@ config RT2500PCI config RT2500PCI_RFKILL bool "RT2500 rfkill support" - depends on RT2500PCI + depends on RT2500PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt2500 devices that feature a @@ -107,7 +108,7 @@ config RT61PCI config RT61PCI_RFKILL bool "RT61 rfkill support" - depends on RT61PCI + depends on RT61PCI && INPUT select RT2X00_LIB_RFKILL ---help--- This adds support for integrated rt61 devices that feature a -- cgit v0.10.2 From 6847aa5cce6e22c3625a243b02909ac46aafa110 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Wed, 11 Jun 2008 13:32:22 -0700 Subject: rt2x00: LEDS build failure Config symbols that select LEDS_CLASS need to depend on NEW_LEDS so that undefined symbols are not used in the build. The alternative is to select NEW_LEDS, which some drivers do. This patch fixes the led_* symbols build errors. (.text+0x174cdc): undefined reference to `input_unregister_device' (.text+0x174d9f): undefined reference to `input_allocate_device' (.text+0x174e2d): undefined reference to `input_register_device' (.text+0x174e53): undefined reference to `input_free_device' rt2x00rfkill.c:(.text+0x176dc4): undefined reference to `input_allocate_polled_device' rt2x00rfkill.c:(.text+0x176e8b): undefined reference to `input_event' rt2x00rfkill.c:(.text+0x176e9f): undefined reference to `input_event' (.text+0x176eca): undefined reference to `input_unregister_polled_device' (.text+0x176efc): undefined reference to `input_free_polled_device' (.text+0x176f37): undefined reference to `input_free_polled_device' (.text+0x176fd8): undefined reference to `input_register_polled_device' (.text+0x1772c0): undefined reference to `led_classdev_resume' (.text+0x1772d4): undefined reference to `led_classdev_resume' (.text+0x1772e8): undefined reference to `led_classdev_resume' (.text+0x17730a): undefined reference to `led_classdev_suspend' (.text+0x17731e): undefined reference to `led_classdev_suspend' (.text+0x17732f): undefined reference to `led_classdev_suspend' rt2x00leds.c:(.text+0x177348): undefined reference to `led_classdev_unregister' rt2x00leds.c:(.text+0x1773c0): undefined reference to `led_classdev_register' rfkill-input.c:(.text+0x209e4c): undefined reference to `input_close_device' rfkill-input.c:(.text+0x209e53): undefined reference to `input_unregister_handle' rfkill-input.c:(.text+0x209ea1): undefined reference to `input_register_handle' rfkill-input.c:(.text+0x209eae): undefined reference to `input_open_device' rfkill-input.c:(.text+0x209ebb): undefined reference to `input_unregister_handle' rfkill-input.c:(.init.text+0x17405): undefined reference to `input_register_handler' rfkill-input.c:(.exit.text+0x194f): undefined reference to `input_unregister_handler' make[1]: *** [vmlinux] Error 1 Signed-off-by: Randy Dunlap Acked-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/Kconfig b/drivers/net/wireless/rt2x00/Kconfig index 23abef9..2d61187 100644 --- a/drivers/net/wireless/rt2x00/Kconfig +++ b/drivers/net/wireless/rt2x00/Kconfig @@ -38,7 +38,7 @@ config RT2X00_LIB_RFKILL config RT2X00_LIB_LEDS boolean - depends on RT2X00_LIB + depends on RT2X00_LIB && NEW_LEDS config RT2400PCI tristate "Ralink rt2400 pci/pcmcia support" @@ -61,7 +61,7 @@ config RT2400PCI_RFKILL config RT2400PCI_LEDS bool "RT2400 leds support" - depends on RT2400PCI + depends on RT2400PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -88,7 +88,7 @@ config RT2500PCI_RFKILL config RT2500PCI_LEDS bool "RT2500 leds support" - depends on RT2500PCI + depends on RT2500PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -117,7 +117,7 @@ config RT61PCI_RFKILL config RT61PCI_LEDS bool "RT61 leds support" - depends on RT61PCI + depends on RT61PCI && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -134,7 +134,7 @@ config RT2500USB config RT2500USB_LEDS bool "RT2500 leds support" - depends on RT2500USB + depends on RT2500USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- @@ -153,7 +153,7 @@ config RT73USB config RT73USB_LEDS bool "RT73 leds support" - depends on RT73USB + depends on RT73USB && NEW_LEDS select LEDS_CLASS select RT2X00_LIB_LEDS ---help--- -- cgit v0.10.2 From e6340361f9c70e84312caed98c6e058ac6234e9b Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Thu, 12 Jun 2008 15:33:13 +0200 Subject: ssb: Fix coherent DMA mask for PCI devices This fixes setting the coherent DMA mask for PCI devices. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index 7cf8851..d184f2a 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -1168,15 +1168,21 @@ EXPORT_SYMBOL(ssb_dma_translation); int ssb_dma_set_mask(struct ssb_device *ssb_dev, u64 mask) { struct device *dma_dev = ssb_dev->dma_dev; + int err = 0; #ifdef CONFIG_SSB_PCIHOST - if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) - return dma_set_mask(dma_dev, mask); + if (ssb_dev->bus->bustype == SSB_BUSTYPE_PCI) { + err = pci_set_dma_mask(ssb_dev->bus->host_pci, mask); + if (err) + return err; + err = pci_set_consistent_dma_mask(ssb_dev->bus->host_pci, mask); + return err; + } #endif dma_dev->coherent_dma_mask = mask; dma_dev->dma_mask = &dma_dev->coherent_dma_mask; - return 0; + return err; } EXPORT_SYMBOL(ssb_dma_set_mask); -- cgit v0.10.2 From 5c5f9664d5284d8542062fed39e1f19b80db7aa5 Mon Sep 17 00:00:00 2001 From: Abhijeet Kolekar Date: Thu, 12 Jun 2008 09:47:16 +0800 Subject: mac80211 : fix for iwconfig in ad-hoc mode The patch checks interface status, if it is in IBSS_JOINED mode show cell id it is associated with. Signed-off-by: Abhijeet Kolekar Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index a8bb8e3..6106cb7 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -496,7 +496,8 @@ static int ieee80211_ioctl_giwap(struct net_device *dev, sdata = IEEE80211_DEV_TO_SUB_IF(dev); if (sdata->vif.type == IEEE80211_IF_TYPE_STA || sdata->vif.type == IEEE80211_IF_TYPE_IBSS) { - if (sdata->u.sta.state == IEEE80211_ASSOCIATED) { + if (sdata->u.sta.state == IEEE80211_ASSOCIATED || + sdata->u.sta.state == IEEE80211_IBSS_JOINED) { ap_addr->sa_family = ARPHRD_ETHER; memcpy(&ap_addr->sa_data, sdata->u.sta.bssid, ETH_ALEN); return 0; -- cgit v0.10.2 From 995ad6c5a415c9389d094d246ca1b305c1e31813 Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Thu, 12 Jun 2008 20:08:19 +0300 Subject: mac80211: add missing new line in debug print HT_DEBUG This patch adds '\n' in debug printk (wme.c HT DEBUG) Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index dc1598b..635b996 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -673,7 +673,7 @@ int ieee80211_ht_agg_queue_add(struct ieee80211_local *local, #ifdef CONFIG_MAC80211_HT_DEBUG if (net_ratelimit()) printk(KERN_DEBUG "allocated aggregation queue" - " %d tid %d addr %s pool=0x%lX", + " %d tid %d addr %s pool=0x%lX\n", i, tid, print_mac(mac, sta->addr), q->qdisc_pool[0]); #endif /* CONFIG_MAC80211_HT_DEBUG */ -- cgit v0.10.2 From cb62eccd7d946f7fb92b8beb79988726ec92c227 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Thu, 12 Jun 2008 20:47:17 +0200 Subject: rt2x00: Add D-link DWA111 support Add new rt73usb USB ID for D-Link DWA111 Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index da19a3a..fff8386 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -2131,6 +2131,7 @@ static struct usb_device_id rt73usb_device_table[] = { /* D-Link */ { USB_DEVICE(0x07d1, 0x3c03), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c04), USB_DEVICE_DATA(&rt73usb_ops) }, + { USB_DEVICE(0x07d1, 0x3c06), USB_DEVICE_DATA(&rt73usb_ops) }, { USB_DEVICE(0x07d1, 0x3c07), USB_DEVICE_DATA(&rt73usb_ops) }, /* Gemtek */ { USB_DEVICE(0x15a9, 0x0004), USB_DEVICE_DATA(&rt73usb_ops) }, -- cgit v0.10.2 From d385c2a85877f0cb785070094edf9a624c090d68 Mon Sep 17 00:00:00 2001 From: Zhang Rui Date: Sat, 14 Jun 2008 01:01:18 -0400 Subject: ACPI Exception (video-1721): UNKNOWN_STATUS_CODE, Cant attach device The child of a video bus device is not alway a video device. It should be a warn message rather than an exception here. http://bugzilla.kernel.org/show_bug.cgi?id=9761 Signed-off-by: Zhang Rui Signed-off-by: Len Brown diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index 5e5dda3a..d089c45 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -1713,7 +1713,8 @@ acpi_video_bus_get_devices(struct acpi_video_bus *video, status = acpi_video_bus_get_one_device(dev, video); if (ACPI_FAILURE(status)) { - ACPI_EXCEPTION((AE_INFO, status, "Cant attach device")); + ACPI_DEBUG_PRINT((ACPI_DB_WARN, + "Cant attach device")); continue; } } -- cgit v0.10.2 From f163ff5176a8e9c827d8ebe044710d67d40799c3 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Sat, 14 Jun 2008 01:26:37 -0400 Subject: ACPI: no AC status notification http://bugzilla.kernel.org/show_bug.cgi?id=10695 Signed-off-by: Len Brown diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c index 5b73f6a..831883b 100644 --- a/drivers/acpi/ac.c +++ b/drivers/acpi/ac.c @@ -233,6 +233,9 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) device = ac->device; switch (event) { + default: + ACPI_DEBUG_PRINT((ACPI_DB_INFO, + "Unsupported event [0x%x]\n", event)); case ACPI_AC_NOTIFY_STATUS: case ACPI_NOTIFY_BUS_CHECK: case ACPI_NOTIFY_DEVICE_CHECK: @@ -244,11 +247,6 @@ static void acpi_ac_notify(acpi_handle handle, u32 event, void *data) #ifdef CONFIG_ACPI_SYSFS_POWER kobject_uevent(&ac->charger.dev->kobj, KOBJ_CHANGE); #endif - break; - default: - ACPI_DEBUG_PRINT((ACPI_DB_INFO, - "Unsupported event [0x%x]\n", event)); - break; } return; -- cgit v0.10.2 From 3ed7897242b7efe977f3a8d06d4e5a4ebe28b10e Mon Sep 17 00:00:00 2001 From: Mike Christie Date: Wed, 11 Jun 2008 19:21:00 -0500 Subject: [SCSI] scsi_host regression: fix scsi host leak commit 9c7701088a61cc0cf8a6e1c68d1e74e3cc2ee0b7 Author: Dave Young Date: Tue Jan 22 14:01:34 2008 +0800 scsi: use class iteration api Isn't a correct replacement for the original hand rolled host lookup. The problem is that class_find_child would get a reference to the host's class device which is never released. Since the host class device holds a reference to the host gendev, the host can never be freed. In 2.6.26 we started using class_find_device, and this function also gets a reference to the device, so we end up with an extra ref and the host will not get released. This patch adds a put_device to balance the class_find_device() get. I kept the scsi_host_get in scsi_host_lookup, because the target layer is using scsi_host_lookup and it looks like it needs the SHOST_DEL check. Signed-off-by: Mike Christie Signed-off-by: James Bottomley diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c index 3690360..c6457bf 100644 --- a/drivers/scsi/hosts.c +++ b/drivers/scsi/hosts.c @@ -456,6 +456,10 @@ static int __scsi_host_match(struct device *dev, void *data) * * Return value: * A pointer to located Scsi_Host or NULL. + * + * The caller must do a scsi_host_put() to drop the reference + * that scsi_host_get() took. The put_device() below dropped + * the reference from class_find_device(). **/ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) { @@ -463,9 +467,10 @@ struct Scsi_Host *scsi_host_lookup(unsigned short hostnum) struct Scsi_Host *shost = ERR_PTR(-ENXIO); cdev = class_find_device(&shost_class, &hostnum, __scsi_host_match); - if (cdev) + if (cdev) { shost = scsi_host_get(class_to_shost(cdev)); - + put_device(cdev); + } return shost; } EXPORT_SYMBOL(scsi_host_lookup); -- cgit v0.10.2 From f93daa3f7ff4f0cc13acc7452a00feb1c586102a Mon Sep 17 00:00:00 2001 From: Jeff Mahoney Date: Fri, 13 Jun 2008 10:38:00 -0400 Subject: [SCSI] dpt_i2o: Add PROC_IA64 define This fixes the following compile failure: drivers/scsi/dpt_i2o.c:83: error: 'PROC_IA64' undeclared here (not in a function) Mark Salyzyn indicated that IA64 must report itself as PROC_INTEL, so I've changed the comment for PROC_INTEL. Signed-off-by: Jeff Mahoney Acked-by: Mark Salyzyn Signed-off-by: James Bottomley diff --git a/drivers/scsi/dpt/dptsig.h b/drivers/scsi/dpt/dptsig.h index 72c8992..a6644b3 100644 --- a/drivers/scsi/dpt/dptsig.h +++ b/drivers/scsi/dpt/dptsig.h @@ -85,7 +85,7 @@ typedef unsigned int sigINT; /* ------------------------------------------------------------------ */ /* What type of processor the file is meant to run on. */ /* This will let us know whether to read sigWORDs as high/low or low/high. */ -#define PROC_INTEL 0x00 /* Intel 80x86 */ +#define PROC_INTEL 0x00 /* Intel 80x86/ia64 */ #define PROC_MOTOROLA 0x01 /* Motorola 68K */ #define PROC_MIPS4000 0x02 /* MIPS RISC 4000 */ #define PROC_ALPHA 0x03 /* DEC Alpha */ @@ -104,6 +104,7 @@ typedef unsigned int sigINT; #define PROC_486 0x08 /* Intel 80486 */ #define PROC_PENTIUM 0x10 /* Intel 586 aka P5 aka Pentium */ #define PROC_SEXIUM 0x20 /* Intel 686 aka P6 aka Pentium Pro or MMX */ +#define PROC_IA64 0x40 /* Intel IA64 processor */ /* PROC_i960: */ #define PROC_960RX 0x01 /* Intel 80960RC/RD */ -- cgit v0.10.2 From 62128b2ca812c1266f4ff7bac068bf0b626c6179 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:21 +0200 Subject: opti621: disable read prefetch This fixes 2.6.25 regression (kernel.org bugzilla bug #10723) caused by: commit 912fb29a36a7269ac1c4a4df45bc0ac1d2637972 Author: Bartlomiej Zolnierkiewicz Date: Fri Oct 19 00:30:11 2007 +0200 opti621: always tune PIO ... Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Bisected-by: Juergen Kosel Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 6e99080..e31e0f9 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -102,18 +102,6 @@ * address: 50 ns, data: 50 ns, recovery: 100 ns. */ -/* #define READ_PREFETCH 0 */ -/* Uncomment for disable read prefetch. - * There is some readprefetch capatibility in hdparm, - * but when I type hdparm -P 1 /dev/hda, I got errors - * and till reset drive is inaccessible. - * This (hw) read prefetch is safe on my drive. - */ - -#ifndef READ_PREFETCH -#define READ_PREFETCH 0x40 /* read prefetch is enabled */ -#endif /* else read prefetch is disabled */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -264,7 +252,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); - misc = READ_PREFETCH | ((ax-1)<<4) | ((drdy-2)<<1); + + misc = ((ax - 1) << 4) | ((drdy - 2) << 1); #ifdef OPTI621_DEBUG printk("%s: master: address: %d, data: %d, " -- cgit v0.10.2 From f361037631ba547ea88adf8d2359d810c1b2605a Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:21 +0200 Subject: opti621: remove DMA support These controllers don't support DMA. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Acked-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index e31e0f9..65f18073 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -324,18 +324,14 @@ static const struct ide_port_info opti621_chipsets[] __devinitdata = { .name = "OPTI621", .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, }, { /* 1 */ .name = "OPTI621X", .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA, + .host_flags = IDE_HFLAG_NO_DMA, .pio_mask = ATA_PIO3, - .swdma_mask = ATA_SWDMA2, - .mwdma_mask = ATA_MWDMA2, } }; -- cgit v0.10.2 From 21bd33a656a60daadc475ce330272f4410ae27b7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: use PCI clock value provided by controller Use PCI clock value provided by controller instead of depending on a default (or user supplied) value. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 65f18073..7547fa2 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -193,11 +193,10 @@ typedef struct pio_clocks_s { int recovery_time; /* Recovery time (clocks) */ } pio_clocks_t; -static void compute_clocks(int pio, pio_clocks_t *clks) +static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) { if (pio != PIO_NOT_EXIST) { int adr_setup, data_pls; - int bus_speed = ide_pci_clk ? ide_pci_clk : system_bus_clock(); adr_setup = ide_pio_timings[pio].setup_time; data_pls = ide_pio_timings[pio].active_time; @@ -234,7 +233,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 pio1 = 0, pio2 = 0; pio_clocks_t first, second; int ax, drdy; - u8 cycle1, cycle2, misc; + u8 cycle1, cycle2, misc, clk; ide_hwif_t *hwif = HWIF(drive); /* sets drive->drive_data for both drives */ @@ -242,8 +241,26 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) pio1 = hwif->drives[0].drive_data; pio2 = hwif->drives[1].drive_data; - compute_clocks(pio1, &first); - compute_clocks(pio2, &second); + spin_lock_irqsave(&opti621_lock, flags); + + reg_base = hwif->io_ports.data_addr; + + /* allow Register-B */ + outb(0xc0, reg_base + CNTRL_REG); + /* hmm, setupvic.exe does this ;-) */ + outb(0xff, reg_base + 5); + /* if reads 0xff, adapter not exist? */ + (void)inb(reg_base + CNTRL_REG); + /* if reads 0xc0, no interface exist? */ + read_reg(CNTRL_REG); + + /* check CLK speed */ + clk = read_reg(STRAP_REG) & 1; + + printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); + + compute_clocks(pio1, &first, clk ? 25 : 33); + compute_clocks(pio2, &second, clk ? 25 : 33); /* ax = max(a1,a2) */ ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; @@ -266,21 +283,6 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) second.recovery_time, drdy); #endif - spin_lock_irqsave(&opti621_lock, flags); - - reg_base = hwif->io_ports.data_addr; - - /* allow Register-B */ - outb(0xc0, reg_base + CNTRL_REG); - /* hmm, setupvic.exe does this ;-) */ - outb(0xff, reg_base + 5); - /* if reads 0xff, adapter not exist? */ - (void)inb(reg_base + CNTRL_REG); - /* if reads 0xc0, no interface exist? */ - read_reg(CNTRL_REG); - /* read version, probably 0 */ - read_reg(STRAP_REG); - /* program primary drive */ /* select Index-0 for Register-A */ write_reg(0, MISC_REG); -- cgit v0.10.2 From 6c987183fcc3c6cb9eb77fd0b3e8ca1ac98a4813 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: program devices timings separately in ->set_pio_mode * Set drive->drive_data to 'pio + XFER_PIO_0' instead of 'pio', then simplify selecting maximum adress setup timing. * Remove no longer needed compute_pios() and opti621_port_init_devs(). * Program devices timings separately in ->set_pio_mode. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 7547fa2..c746e6f 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -115,34 +115,6 @@ static int reg_base; static DEFINE_SPINLOCK(opti621_lock); -/* there are stored pio numbers from other calls of opti621_set_pio_mode */ -static void compute_pios(ide_drive_t *drive, const u8 pio) -/* Store values into drive->drive_data - * second_contr - 0 for primary controller, 1 for secondary - * slave_drive - 0 -> pio is for master, 1 -> pio is for slave - * pio - PIO mode for selected drive (for other we don't know) - */ -{ - int d; - ide_hwif_t *hwif = HWIF(drive); - - drive->drive_data = pio; - - for (d = 0; d < 2; ++d) { - drive = &hwif->drives[d]; - if (drive->present) { - if (drive->drive_data == PIO_DONT_KNOW) - drive->drive_data = ide_get_best_pio_mode(drive, 255, 3); -#ifdef OPTI621_DEBUG - printk("%s: Selected PIO mode %d\n", - drive->name, drive->drive_data); -#endif - } else { - drive->drive_data = PIO_NOT_EXIST; - } - } -} - static int cmpt_clk(int time, int bus_speed) /* Returns (rounded up) time in clocks for time in ns, * with bus_speed in MHz. @@ -226,20 +198,19 @@ static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { - /* primary and secondary drives share some registers, - * so we have to program both drives - */ + ide_hwif_t *hwif = drive->hwif; + ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - u8 pio1 = 0, pio2 = 0; pio_clocks_t first, second; int ax, drdy; - u8 cycle1, cycle2, misc, clk; - ide_hwif_t *hwif = HWIF(drive); + u8 cycle1, misc, clk, addr_pio = pio; - /* sets drive->drive_data for both drives */ - compute_pios(drive, pio); - pio1 = hwif->drives[0].drive_data; - pio2 = hwif->drives[1].drive_data; + drive->drive_data = XFER_PIO_0 + pio; + + if (pair->present) { + if (pair->drive_data && pair->drive_data < drive->drive_data) + addr_pio = pair->drive_data - XFER_PIO_0; + } spin_lock_irqsave(&opti621_lock, flags); @@ -259,8 +230,8 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - compute_clocks(pio1, &first, clk ? 25 : 33); - compute_clocks(pio2, &second, clk ? 25 : 33); + compute_clocks(pio, &first, clk ? 25 : 33); + compute_clocks(addr_pio, &second, clk ? 25 : 33); /* ax = max(a1,a2) */ ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; @@ -268,37 +239,23 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - cycle2 = ((second.data_time-1)<<4) | (second.recovery_time-2); misc = ((ax - 1) << 4) | ((drdy - 2) << 1); #ifdef OPTI621_DEBUG - printk("%s: master: address: %d, data: %d, " + printk("%s: address: %d, data: %d, " "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, first.data_time, + drive->name, ax, first.data_time, first.recovery_time, drdy); - printk("%s: slave: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - hwif->name, ax, second.data_time, - second.recovery_time, drdy); #endif - /* program primary drive */ - /* select Index-0 for Register-A */ - write_reg(0, MISC_REG); + /* select Index-0/1 for Register-A/B */ + write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ write_reg(cycle1, READ_REG); /* set write cycle timings */ write_reg(cycle1, WRITE_REG); - /* program secondary drive */ - /* select Index-1 for Register-B */ - write_reg(1, MISC_REG); - /* set read cycle timings */ - write_reg(cycle2, READ_REG); - /* set write cycle timings */ - write_reg(cycle2, WRITE_REG); - /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ write_reg(0x85, CNTRL_REG); @@ -310,14 +267,7 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) spin_unlock_irqrestore(&opti621_lock, flags); } -static void __devinit opti621_port_init_devs(ide_hwif_t *hwif) -{ - hwif->drives[0].drive_data = PIO_DONT_KNOW; - hwif->drives[1].drive_data = PIO_DONT_KNOW; -} - static const struct ide_port_ops opti621_port_ops = { - .port_init_devs = opti621_port_init_devs, .set_pio_mode = opti621_set_pio_mode, }; -- cgit v0.10.2 From 810253d44bc92b44b66cd9944b579de54c0cd3ff Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: use pre-calculated PIO timings * Use pre-calculated PIO timings in ->set_pio_mode. * Remove no longer needed compute_clocks(), cmpt_clk(), struct pio_clocks_s, PIO_* defines and OPTI621_DEBUG define. There should be no functional changes caused by this patch. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index c746e6f..8c715b7 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -81,8 +81,6 @@ * 0.5 doesn't work. */ -#define OPTI621_DEBUG /* define for debug messages */ - #include #include #include @@ -110,23 +108,8 @@ static int reg_base; -#define PIO_NOT_EXIST 254 -#define PIO_DONT_KNOW 255 - static DEFINE_SPINLOCK(opti621_lock); -static int cmpt_clk(int time, int bus_speed) -/* Returns (rounded up) time in clocks for time in ns, - * with bus_speed in MHz. - * Example: bus_speed = 40 MHz, time = 80 ns - * 1000/40 = 25 ns (clk value), - * 80/25 = 3.2, rounded up to 4 (I hope ;-)). - * Use idebus=xx to select right frequency. - */ -{ - return ((time*bus_speed+999)/1000); -} - /* Write value to register reg, base of register * is at reg_base (0x1f0 primary, 0x170 secondary, * if not changed by PCI configuration). @@ -159,51 +142,22 @@ static u8 read_reg(int reg) return ret; } -typedef struct pio_clocks_s { - int address_time; /* Address setup (clocks) */ - int data_time; /* Active/data pulse (clocks) */ - int recovery_time; /* Recovery time (clocks) */ -} pio_clocks_t; - -static void compute_clocks(int pio, pio_clocks_t *clks, int bus_speed) -{ - if (pio != PIO_NOT_EXIST) { - int adr_setup, data_pls; - - adr_setup = ide_pio_timings[pio].setup_time; - data_pls = ide_pio_timings[pio].active_time; - clks->address_time = cmpt_clk(adr_setup, bus_speed); - clks->data_time = cmpt_clk(data_pls, bus_speed); - clks->recovery_time = cmpt_clk(ide_pio_timings[pio].cycle_time - - adr_setup-data_pls, bus_speed); - if (clks->address_time < 1) - clks->address_time = 1; - if (clks->address_time > 4) - clks->address_time = 4; - if (clks->data_time < 1) - clks->data_time = 1; - if (clks->data_time > 16) - clks->data_time = 16; - if (clks->recovery_time < 2) - clks->recovery_time = 2; - if (clks->recovery_time > 17) - clks->recovery_time = 17; - } else { - clks->address_time = 1; - clks->data_time = 1; - clks->recovery_time = 2; - /* minimal values */ - } -} - static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) { ide_hwif_t *hwif = drive->hwif; ide_drive_t *pair = ide_get_paired_drive(drive); unsigned long flags; - pio_clocks_t first, second; - int ax, drdy; - u8 cycle1, misc, clk, addr_pio = pio; + u8 tim, misc, addr_pio = pio, clk; + + /* DRDY is default 2 (by OPTi Databook) */ + static const u8 addr_timings[2][4] = { + { 0x20, 0x10, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00 }, /* 25 MHz */ + }; + static const u8 data_rec_timings[2][4] = { + { 0x5b, 0x45, 0x32, 0x21 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10 } /* 25 MHz */ + }; drive->drive_data = XFER_PIO_0 + pio; @@ -230,31 +184,15 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33); - compute_clocks(pio, &first, clk ? 25 : 33); - compute_clocks(addr_pio, &second, clk ? 25 : 33); - - /* ax = max(a1,a2) */ - ax = (first.address_time < second.address_time) ? second.address_time : first.address_time; - - drdy = 2; /* DRDY is default 2 (by OPTi Databook) */ - - cycle1 = ((first.data_time-1)<<4) | (first.recovery_time-2); - - misc = ((ax - 1) << 4) | ((drdy - 2) << 1); - -#ifdef OPTI621_DEBUG - printk("%s: address: %d, data: %d, " - "recovery: %d, drdy: %d [clk]\n", - drive->name, ax, first.data_time, - first.recovery_time, drdy); -#endif + tim = data_rec_timings[clk][pio]; + misc = addr_timings[clk][addr_pio]; /* select Index-0/1 for Register-A/B */ write_reg(drive->select.b.unit, MISC_REG); /* set read cycle timings */ - write_reg(cycle1, READ_REG); + write_reg(tim, READ_REG); /* set write cycle timings */ - write_reg(cycle1, WRITE_REG); + write_reg(tim, WRITE_REG); /* use Register-A for drive 0 */ /* use Register-B for drive 1 */ -- cgit v0.10.2 From 80a65fc5ee04497e6c28bdaefc44d375b19c4a79 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:22 +0200 Subject: opti621: add PIO 4 support * Add PIO 4 support. While at it: * Use a single struct ide_port_info instance for OPTi621 and OPTi621X. Based on a bugreport from Juergen Kosel & inspired by pata_opti.c code. Tested-by: Juergen Kosel Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c index 8c715b7..725c805 100644 --- a/drivers/ide/pci/opti621.c +++ b/drivers/ide/pci/opti621.c @@ -90,16 +90,6 @@ #include -//#define OPTI621_MAX_PIO 3 -/* In fact, I do not have any PIO 4 drive - * (address: 25 ns, data: 70 ns, recovery: 35 ns), - * but OPTi 82C621 is programmable and it can do (minimal values): - * on 40MHz PCI bus (pulse 25 ns): - * address: 25 ns, data: 25 ns, recovery: 50 ns; - * on 20MHz PCI bus (pulse 50 ns): - * address: 50 ns, data: 50 ns, recovery: 100 ns. - */ - #define READ_REG 0 /* index of Read cycle timing register */ #define WRITE_REG 1 /* index of Write cycle timing register */ #define CNTRL_REG 3 /* index of Control register */ @@ -150,13 +140,13 @@ static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio) u8 tim, misc, addr_pio = pio, clk; /* DRDY is default 2 (by OPTi Databook) */ - static const u8 addr_timings[2][4] = { - { 0x20, 0x10, 0x00, 0x00 }, /* 33 MHz */ - { 0x10, 0x10, 0x00, 0x00 }, /* 25 MHz */ + static const u8 addr_timings[2][5] = { + { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */ + { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */ }; - static const u8 data_rec_timings[2][4] = { - { 0x5b, 0x45, 0x32, 0x21 }, /* 33 MHz */ - { 0x48, 0x34, 0x21, 0x10 } /* 25 MHz */ + static const u8 data_rec_timings[2][5] = { + { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */ + { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */ }; drive->drive_data = XFER_PIO_0 + pio; @@ -209,30 +199,22 @@ static const struct ide_port_ops opti621_port_ops = { .set_pio_mode = opti621_set_pio_mode, }; -static const struct ide_port_info opti621_chipsets[] __devinitdata = { - { /* 0 */ - .name = "OPTI621", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_NO_DMA, - .pio_mask = ATA_PIO3, - }, { /* 1 */ - .name = "OPTI621X", - .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, - .port_ops = &opti621_port_ops, - .host_flags = IDE_HFLAG_NO_DMA, - .pio_mask = ATA_PIO3, - } +static const struct ide_port_info opti621_chipset __devinitdata = { + .name = "OPTI621/X", + .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} }, + .port_ops = &opti621_port_ops, + .host_flags = IDE_HFLAG_NO_DMA, + .pio_mask = ATA_PIO4, }; static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id) { - return ide_setup_pci_device(dev, &opti621_chipsets[id->driver_data]); + return ide_setup_pci_device(dev, &opti621_chipset); } static const struct pci_device_id opti621_pci_tbl[] = { { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 }, - { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 1 }, + { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 }, { 0, }, }; MODULE_DEVICE_TABLE(pci, opti621_pci_tbl); -- cgit v0.10.2 From c1a8e39819bd6797ee2b82b88517268d39921b03 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: bugfix for media-bay support rework Fix bug introduced by: commit 2dde7861afa23cd59db83515cb0b810b92b220aa Author: Bartlomiej Zolnierkiewicz Date: Fri Apr 18 00:46:23 2008 +0200 ide: rework PowerMac media-bay support (take 2) ... [ Yeah, I suck. ] bay->cd_index shouldn't be changed if IDE devices are not present or retry operations won't happen. Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index 82add26..c34bdf8 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -556,7 +556,8 @@ static void media_bay_step(int i) printk("mediabay %d, registering IDE...\n", i); pmu_suspend(); ide_port_scan(bay->cd_port); - bay->cd_index = bay->cd_port->index; + if (bay->cd_port->present) + bay->cd_index = bay->cd_port->index; pmu_resume(); } if (bay->cd_index == -1) { -- cgit v0.10.2 From 07a6c66da53f646a39103290bfbd85be18892895 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: add ->cable_detect method Add ->cable_detect method and remove no longer needed pmif->cable_80 flag (there is also no need to mask ->udma_mask now). This fixes: - forced ignoring of cable detection (needed for some CF devices & debug) - cable detection for warm-plug Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 48aa019..7f669a9 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -59,7 +59,6 @@ typedef struct pmac_ide_hwif { int irq; int kind; int aapl_bus_id; - unsigned cable_80 : 1; unsigned mediabay : 1; unsigned broken_dma : 1; unsigned broken_dma_warn : 1; @@ -918,10 +917,40 @@ pmac_ide_do_resume(ide_hwif_t *hwif) return 0; } +static u8 pmac_ide_cable_detect(ide_hwif_t *hwif) +{ + pmac_ide_hwif_t *pmif = (pmac_ide_hwif_t *)ide_get_hwifdata(hwif); + struct device_node *np = pmif->node; + const char *cable = of_get_property(np, "cable-type", NULL); + + /* Get cable type from device-tree. */ + if (cable && !strncmp(cable, "80-", 3)) + return ATA_CBL_PATA80; + + /* + * G5's seem to have incorrect cable type in device-tree. + * Let's assume they have a 80 conductor cable, this seem + * to be always the case unless the user mucked around. + */ + if (of_device_is_compatible(np, "K2-UATA") || + of_device_is_compatible(np, "shasta-ata")) + return ATA_CBL_PATA80; + + return ATA_CBL_PATA40; +} + static const struct ide_port_ops pmac_ide_ata6_port_ops = { .set_pio_mode = pmac_ide_set_pio_mode, .set_dma_mode = pmac_ide_set_dma_mode, .selectproc = pmac_ide_kauai_selectproc, + .cable_detect = pmac_ide_cable_detect, +}; + +static const struct ide_port_ops pmac_ide_ata4_port_ops = { + .set_pio_mode = pmac_ide_set_pio_mode, + .set_dma_mode = pmac_ide_set_dma_mode, + .selectproc = pmac_ide_selectproc, + .cable_detect = pmac_ide_cable_detect, }; static const struct ide_port_ops pmac_ide_port_ops = { @@ -962,7 +991,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; struct ide_port_info d = pmac_port_info; - pmif->cable_80 = 0; pmif->broken_dma = pmif->broken_dma_warn = 0; if (of_device_is_compatible(np, "shasta-ata")) { pmif->kind = controller_sh_ata6; @@ -979,6 +1007,7 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } else if (of_device_is_compatible(np, "keylargo-ata")) { if (strcmp(np->name, "ata-4") == 0) { pmif->kind = controller_kl_ata4; + d.port_ops = &pmac_ide_ata4_port_ops; d.udma_mask = ATA_UDMA4; } else pmif->kind = controller_kl_ata3; @@ -992,22 +1021,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) bidp = of_get_property(np, "AAPL,bus-id", NULL); pmif->aapl_bus_id = bidp ? *bidp : 0; - /* Get cable type from device-tree */ - if (pmif->kind == controller_kl_ata4 || pmif->kind == controller_un_ata6 - || pmif->kind == controller_k2_ata6 - || pmif->kind == controller_sh_ata6) { - const char* cable = of_get_property(np, "cable-type", NULL); - if (cable && !strncmp(cable, "80-", 3)) - pmif->cable_80 = 1; - } - /* G5's seem to have incorrect cable type in device-tree. Let's assume - * they have a 80 conductor cable, this seem to be always the case unless - * the user mucked around - */ - if (of_device_is_compatible(np, "K2-UATA") || - of_device_is_compatible(np, "shasta-ata")) - pmif->cable_80 = 1; - /* On Kauai-type controllers, we make sure the FCR is correct */ if (pmif->kauai_fcr) writel(KAUAI_FCR_UATA_MAGIC | @@ -1053,7 +1066,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) hwif->hwif_data = pmif; ide_init_port_hw(hwif, hw); - hwif->cbl = pmif->cable_80 ? ATA_CBL_PATA80 : ATA_CBL_PATA40; printk(KERN_INFO "ide%d: Found Apple %s controller, bus ID %d%s, irq %d\n", hwif->index, model_name[pmif->kind], pmif->aapl_bus_id, @@ -1070,11 +1082,6 @@ pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) } } -#ifdef CONFIG_BLK_DEV_IDEDMA_PMAC - if (pmif->cable_80 == 0) - d.udma_mask &= ATA_UDMA2; -#endif - idx[0] = hwif->index; ide_device_add(idx, &d); -- cgit v0.10.2 From 5b16464ac32a92c2332030d11ec445bddeb141fa Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-pmac: remove bogus comment about pmac_ide_setup_device() Cc: Benjamin Herrenschmidt Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ppc/pmac.c b/drivers/ide/ppc/pmac.c index 7f669a9..ba2d587 100644 --- a/drivers/ide/ppc/pmac.c +++ b/drivers/ide/ppc/pmac.c @@ -978,10 +978,7 @@ static const struct ide_port_info pmac_port_info = { /* * Setup, register & probe an IDE channel driven by this driver, this is - * called by one of the 2 probe functions (macio or PCI). Note that a channel - * that ends up beeing free of any device is not kept around by this driver - * (it is kept in 2.4). This introduce an interface numbering change on some - * rare machines unfortunately, but it's better this way. + * called by one of the 2 probe functions (macio or PCI). */ static int __devinit pmac_ide_setup_device(pmac_ide_hwif_t *pmif, ide_hwif_t *hwif, hw_regs_t *hw) -- cgit v0.10.2 From 792a1a98560a2a1619491eed8b18fccb09b312a7 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-cs: fix probing and add warm-plug support * Fix probing by using ide_port_scan() and moving "retry loop" from ide_config() to idecs_register(). * Don't fail probe if there are no devices attached to a port. * Remove (now redundant) error message from ide_config(). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index aa2ea3d..d08107d 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -194,6 +194,16 @@ static ide_hwif_t *idecs_register(unsigned long io, unsigned long ctl, if (hwif->present) return hwif; + /* retry registration in case device is still spinning up */ + for (i = 0; i < 10; i++) { + msleep(100); + ide_port_scan(hwif); + if (hwif->present) + return hwif; + } + + return hwif; + out_release: release_region(ctl, 1); release_region(io, 8); @@ -222,7 +232,7 @@ static int ide_config(struct pcmcia_device *link) cistpl_cftable_entry_t dflt; } *stk = NULL; cistpl_cftable_entry_t *cfg; - int i, pass, last_ret = 0, last_fn = 0, is_kme = 0; + int pass, last_ret = 0, last_fn = 0, is_kme = 0; unsigned long io_base, ctl_base; ide_hwif_t *hwif; @@ -319,30 +329,15 @@ static int ide_config(struct pcmcia_device *link) if (is_kme) outb(0x81, ctl_base+1); - /* retry registration in case device is still spinning up */ - for (i = 0; i < 10; i++) { - hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); - if (hwif) - break; - if (link->io.NumPorts1 == 0x20) { + hwif = idecs_register(io_base, ctl_base, link->irq.AssignedIRQ, link); + if (hwif == NULL && link->io.NumPorts1 == 0x20) { outb(0x02, ctl_base + 0x10); hwif = idecs_register(io_base + 0x10, ctl_base + 0x10, link->irq.AssignedIRQ, link); - if (hwif) { - io_base += 0x10; - ctl_base += 0x10; - break; - } - } - msleep(100); } - if (hwif == NULL) { - printk(KERN_NOTICE "ide-cs: ide_register() at 0x%3lx & 0x%3lx" - ", irq %u failed\n", io_base, ctl_base, - link->irq.AssignedIRQ); + if (hwif == NULL) goto failed; - } info->ndev = 1; sprintf(info->node.dev_name, "hd%c", 'a' + hwif->index * 2); -- cgit v0.10.2 From fbc69fd9b76158daaa83e5372e44fdd81df20f92 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:23 +0200 Subject: ide-cs: fix releasing I/O resources hwif content is already freed after ide_release() call so cache hwif->io_ports.{data,ctl}_addr in local variables in ide_detach(). This fixes post-2.6.25 regression. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index d08107d..f633b6b 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -135,13 +135,17 @@ static void ide_detach(struct pcmcia_device *link) { ide_info_t *info = link->priv; ide_hwif_t *hwif = info->hwif; + unsigned long data_addr, ctl_addr; DEBUG(0, "ide_detach(0x%p)\n", link); + data_addr = hwif->io_ports.data_addr; + ctl_addr = hwif->io_ports.ctl_addr; + ide_release(link); - release_region(hwif->io_ports.ctl_addr, 1); - release_region(hwif->io_ports.data_addr, 8); + release_region(ctl_addr, 1); + release_region(data_addr, 8); kfree(info); } /* ide_detach */ -- cgit v0.10.2 From 0cbccbc30a60ff60dbeb203154f1f527c632de9b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 15 Jun 2008 21:00:24 +0200 Subject: ide-generic: don't probe all legacy ISA IDE ports by default We can't probe all legacy ISA IDE ports by default as the resources may be occupied by other ISA devices. Add "probe_mask" module parameter and probe only first two ISA IDE ports by default leaving the decision about probing the rest to the user (systems with ISA ide2-6 should be very, very rare). This fixes a regression caused by: commit 343a3451e20314d5959b59b992e33fbaadfe52bf Author: Bartlomiej Zolnierkiewicz Date: Tue Jun 10 20:56:36 2008 +0200 ide-generic: add missing hwif->chipset setup ... Reported-by: Mikael Pettersson Bisected-by: Mikael Pettersson Tested-by: Mikael Pettersson Cc: Alan Cox Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index 9134488..2d92214 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -22,6 +22,10 @@ #define DRV_NAME "ide_generic" +static int probe_mask = 0x03; +module_param(probe_mask, int, 0); +MODULE_PARM_DESC(probe_mask, "probe mask for legacy ISA IDE ports"); + static ssize_t store_add(struct class *cls, const char *buf, size_t n) { ide_hwif_t *hwif; @@ -89,6 +93,9 @@ static int __init ide_generic_init(void) u8 idx[MAX_HWIFS]; int i; + printk(KERN_INFO DRV_NAME ": please use \"probe_mask=0x3f\" module " + "parameter for probing all legacy ISA IDE ports\n"); + for (i = 0; i < MAX_HWIFS; i++) { ide_hwif_t *hwif; unsigned long io_addr = ide_default_io_base(i); @@ -96,7 +103,7 @@ static int __init ide_generic_init(void) idx[i] = 0xff; - if (io_addr) { + if ((probe_mask & (1 << i)) && io_addr) { if (!request_region(io_addr, 8, DRV_NAME)) { printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX " "not free.\n", -- cgit v0.10.2 From b92dea67cc66970cda6b5b11895d08e35b4618e7 Mon Sep 17 00:00:00 2001 From: Mark McLoughlin Date: Sun, 15 Jun 2008 23:20:50 +1000 Subject: virtio: Complete feature negotation before updating status lguest (in rusty's use-tun-ringfd patch) assumes that the guest has updated its feature bits before setting its status to VIRTIO_CONFIG_S_DRIVER_OK. That's pretty reasonable, so let's make it so. Signed-off-by: Mark McLoughlin Signed-off-by: Rusty Russell Signed-off-by: Linus Torvalds diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index 0f3c2bb..7084e7e 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -124,9 +124,9 @@ static int virtio_dev_probe(struct device *_d) if (err) add_status(dev, VIRTIO_CONFIG_S_FAILED); else { - add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); /* They should never have set feature bits beyond 32 */ dev->config->set_features(dev, dev->features[0]); + add_status(dev, VIRTIO_CONFIG_S_DRIVER_OK); } return err; } -- cgit v0.10.2 From d84050f48ebba73994b93ccf61cea2364dac8d75 Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Thu, 29 May 2008 17:46:10 -0300 Subject: powerpc/spufs: wait for stable spu status in spu_stopped() If the spu is stopping (ie, the SPU_STATUS_RUNNING bit is still set), re-read the register to get the final stopped value. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index b7493b8..0046bcf 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -51,14 +51,22 @@ int spu_stopped(struct spu_context *ctx, u32 *stat) u64 dsisr; u32 stopped; - *stat = ctx->ops->status_read(ctx); + stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | + SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; - if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) +top: + *stat = ctx->ops->status_read(ctx); + if (*stat & stopped) { + /* + * If the spu hasn't finished stopping, we need to + * re-read the register to get the stopped value. + */ + if (*stat & SPU_STATUS_RUNNING) + goto top; return 1; + } - stopped = SPU_STATUS_INVALID_INSTR | SPU_STATUS_SINGLE_STEP | - SPU_STATUS_STOPPED_BY_HALT | SPU_STATUS_STOPPED_BY_STOP; - if (!(*stat & SPU_STATUS_RUNNING) && (*stat & stopped)) + if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) return 1; dsisr = ctx->csa.class_0_dsisr; -- cgit v0.10.2 From 1f64643aa5f5a17f1723f7ea0f17b7a3a8f632b3 Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Thu, 5 Jun 2008 17:30:25 +0800 Subject: powerpc/spufs: remove class_0_dsisr from spu exception handling According to the CBEA, the SPU dsisr is not updated for class 0 exceptions. spu_stopped() is testing the dsisr that was passed to it from the class 0 exception handler, so we return a false positive here. This patch cleans up the interrupt handler and erroneous tests in spu_stopped. It also removes the fields from the csa since it is not needed to process class 0 events. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 70c6601..96b5f0f 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -324,14 +324,12 @@ spu_irq_class_0(int irq, void *data) stat = spu_int_stat_get(spu, 0) & mask; spu->class_0_pending |= stat; - spu->class_0_dsisr = spu_mfc_dsisr_get(spu); spu->class_0_dar = spu_mfc_dar_get(spu); spin_unlock(&spu->register_lock); spu->stop_callback(spu, 0); spu->class_0_pending = 0; - spu->class_0_dsisr = 0; spu->class_0_dar = 0; spu_int_stat_clear(spu, 0, stat); diff --git a/arch/powerpc/platforms/cell/spufs/run.c b/arch/powerpc/platforms/cell/spufs/run.c index 0046bcf..f7edba6 100644 --- a/arch/powerpc/platforms/cell/spufs/run.c +++ b/arch/powerpc/platforms/cell/spufs/run.c @@ -27,7 +27,6 @@ void spufs_stop_callback(struct spu *spu, int irq) switch(irq) { case 0 : ctx->csa.class_0_pending = spu->class_0_pending; - ctx->csa.class_0_dsisr = spu->class_0_dsisr; ctx->csa.class_0_dar = spu->class_0_dar; break; case 1 : @@ -69,10 +68,6 @@ top: if (test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags)) return 1; - dsisr = ctx->csa.class_0_dsisr; - if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) - return 1; - dsisr = ctx->csa.class_1_dsisr; if (dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)) return 1; diff --git a/arch/powerpc/xmon/xmon.c b/arch/powerpc/xmon/xmon.c index 1702de9..bfcf70e 100644 --- a/arch/powerpc/xmon/xmon.c +++ b/arch/powerpc/xmon/xmon.c @@ -2844,7 +2844,6 @@ static void dump_spu_fields(struct spu *spu) DUMP_FIELD(spu, "0x%lx", flags); DUMP_FIELD(spu, "%d", class_0_pending); DUMP_FIELD(spu, "0x%lx", class_0_dar); - DUMP_FIELD(spu, "0x%lx", class_0_dsisr); DUMP_FIELD(spu, "0x%lx", class_1_dar); DUMP_FIELD(spu, "0x%lx", class_1_dsisr); DUMP_FIELD(spu, "0x%lx", irqs[0]); diff --git a/include/asm-powerpc/spu.h b/include/asm-powerpc/spu.h index 6abead6..99348c1 100644 --- a/include/asm-powerpc/spu.h +++ b/include/asm-powerpc/spu.h @@ -131,7 +131,6 @@ struct spu { u64 flags; u64 class_0_pending; u64 class_0_dar; - u64 class_0_dsisr; u64 class_1_dar; u64 class_1_dsisr; size_t ls_size; diff --git a/include/asm-powerpc/spu_csa.h b/include/asm-powerpc/spu_csa.h index 129ec14..a40fd49 100644 --- a/include/asm-powerpc/spu_csa.h +++ b/include/asm-powerpc/spu_csa.h @@ -254,7 +254,7 @@ struct spu_state { u64 spu_chnldata_RW[32]; u32 spu_mailbox_data[4]; u32 pu_mailbox_data[1]; - u64 class_0_dar, class_0_dsisr, class_0_pending; + u64 class_0_dar, class_0_pending; u64 class_1_dar, class_1_dsisr; unsigned long suspend_time; spinlock_t register_lock; -- cgit v0.10.2 From 2c911a14b74fa9cf815a936f310e4fa85bee77ce Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Fri, 13 Jun 2008 14:17:35 +1000 Subject: powerpc/spufs: synchronize interaction between spu exception handling and time slicing Time slicing can occur at the same time as spu exception handling resulting in the wakeup of the wrong thread. This change uses the the spu's register_lock to enforce synchronization between bind/unbind and spu exception handling so that they are mutually exclusive. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spu_base.c b/arch/powerpc/platforms/cell/spu_base.c index 96b5f0f..78f905b 100644 --- a/arch/powerpc/platforms/cell/spu_base.c +++ b/arch/powerpc/platforms/cell/spu_base.c @@ -219,15 +219,25 @@ static int __spu_trap_data_seg(struct spu *spu, unsigned long ea) extern int hash_page(unsigned long ea, unsigned long access, unsigned long trap); //XXX static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr) { + int ret; + pr_debug("%s, %lx, %lx\n", __func__, dsisr, ea); - /* Handle kernel space hash faults immediately. - User hash faults need to be deferred to process context. */ - if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) - && REGION_ID(ea) != USER_REGION_ID - && hash_page(ea, _PAGE_PRESENT, 0x300) == 0) { - spu_restart_dma(spu); - return 0; + /* + * Handle kernel space hash faults immediately. User hash + * faults need to be deferred to process context. + */ + if ((dsisr & MFC_DSISR_PTE_NOT_FOUND) && + (REGION_ID(ea) != USER_REGION_ID)) { + + spin_unlock(&spu->register_lock); + ret = hash_page(ea, _PAGE_PRESENT, 0x300); + spin_lock(&spu->register_lock); + + if (!ret) { + spu_restart_dma(spu); + return 0; + } } spu->class_1_dar = ea; @@ -325,14 +335,12 @@ spu_irq_class_0(int irq, void *data) spu->class_0_pending |= stat; spu->class_0_dar = spu_mfc_dar_get(spu); - spin_unlock(&spu->register_lock); - spu->stop_callback(spu, 0); - spu->class_0_pending = 0; spu->class_0_dar = 0; spu_int_stat_clear(spu, 0, stat); + spin_unlock(&spu->register_lock); return IRQ_HANDLED; } @@ -355,13 +363,12 @@ spu_irq_class_1(int irq, void *data) spu_mfc_dsisr_set(spu, 0ul); spu_int_stat_clear(spu, 1, stat); - if (stat & CLASS1_SEGMENT_FAULT_INTR) - __spu_trap_data_seg(spu, dar); - - spin_unlock(&spu->register_lock); pr_debug("%s: %lx %lx %lx %lx\n", __func__, mask, stat, dar, dsisr); + if (stat & CLASS1_SEGMENT_FAULT_INTR) + __spu_trap_data_seg(spu, dar); + if (stat & CLASS1_STORAGE_FAULT_INTR) __spu_trap_data_map(spu, dar, dsisr); @@ -374,6 +381,8 @@ spu_irq_class_1(int irq, void *data) spu->class_1_dsisr = 0; spu->class_1_dar = 0; + spin_unlock(&spu->register_lock); + return stat ? IRQ_HANDLED : IRQ_NONE; } @@ -392,14 +401,12 @@ spu_irq_class_2(int irq, void *data) mask = spu_int_mask_get(spu, 2); /* ignore interrupts we're not waiting for */ stat &= mask; - /* mailbox interrupts are level triggered. mask them now before * acknowledging */ if (stat & mailbox_intrs) spu_int_mask_and(spu, 2, ~(stat & mailbox_intrs)); /* acknowledge all interrupts before the callbacks */ spu_int_stat_clear(spu, 2, stat); - spin_unlock(&spu->register_lock); pr_debug("class 2 interrupt %d, %lx, %lx\n", irq, stat, mask); @@ -419,6 +426,9 @@ spu_irq_class_2(int irq, void *data) spu->wbox_callback(spu); spu->stats.class2_intr++; + + spin_unlock(&spu->register_lock); + return stat ? IRQ_HANDLED : IRQ_NONE; } diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index 745dd51..cd72567 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -230,19 +230,23 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx) ctx->stats.slb_flt_base = spu->stats.slb_flt; ctx->stats.class2_intr_base = spu->stats.class2_intr; + spu_associate_mm(spu, ctx->owner); + + spin_lock_irq(&spu->register_lock); spu->ctx = ctx; spu->flags = 0; ctx->spu = spu; ctx->ops = &spu_hw_ops; spu->pid = current->pid; spu->tgid = current->tgid; - spu_associate_mm(spu, ctx->owner); spu->ibox_callback = spufs_ibox_callback; spu->wbox_callback = spufs_wbox_callback; spu->stop_callback = spufs_stop_callback; spu->mfc_callback = spufs_mfc_callback; - mb(); + spin_unlock_irq(&spu->register_lock); + spu_unmap_mappings(ctx); + spu_switch_log_notify(spu, ctx, SWITCH_LOG_START, 0); spu_restore(&ctx->csa, spu); spu->timestamp = jiffies; @@ -423,18 +427,22 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) spu_unmap_mappings(ctx); spu_save(&ctx->csa, spu); spu_switch_log_notify(spu, ctx, SWITCH_LOG_STOP, 0); + + spin_lock_irq(&spu->register_lock); spu->timestamp = jiffies; ctx->state = SPU_STATE_SAVED; spu->ibox_callback = NULL; spu->wbox_callback = NULL; spu->stop_callback = NULL; spu->mfc_callback = NULL; - spu_associate_mm(spu, NULL); spu->pid = 0; spu->tgid = 0; ctx->ops = &spu_backing_ops; spu->flags = 0; spu->ctx = NULL; + spin_unlock_irq(&spu->register_lock); + + spu_associate_mm(spu, NULL); ctx->stats.slb_flt += (spu->stats.slb_flt - ctx->stats.slb_flt_base); -- cgit v0.10.2 From 028fda0a6c80c26f1d9f403b4490b9ddc74ffa3b Mon Sep 17 00:00:00 2001 From: Luke Browning Date: Mon, 16 Jun 2008 10:42:38 +1000 Subject: powerpc/spufs: fix missed stop-and-signal event There is a delay in the transition to the stopped state for class 2 interrupts. In some cases, the controlling thread detects the state of the spu as running, and goes back to sleep resulting in a hung application as the event is missed. This change detects the stop condition and re-generates the wakeup event after a context save. Signed-off-by: Luke Browning Signed-off-by: Jeremy Kerr diff --git a/arch/powerpc/platforms/cell/spufs/sched.c b/arch/powerpc/platforms/cell/spufs/sched.c index cd72567..e929e70 100644 --- a/arch/powerpc/platforms/cell/spufs/sched.c +++ b/arch/powerpc/platforms/cell/spufs/sched.c @@ -407,6 +407,8 @@ static int has_affinity(struct spu_context *ctx) */ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) { + u32 status; + spu_context_trace(spu_unbind_context__enter, ctx, spu); spuctx_switch_state(ctx, SPU_UTIL_SYSTEM); @@ -452,6 +454,9 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx) /* This maps the underlying spu state to idle */ spuctx_switch_state(ctx, SPU_UTIL_IDLE_LOADED); ctx->spu = NULL; + + if (spu_stopped(ctx, &status)) + wake_up_all(&ctx->stop_wq); } /** -- cgit v0.10.2 From 598056d5af8fef1dbe8f96f5c2b641a528184e5a Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Thu, 22 May 2008 00:10:56 +1000 Subject: [POWERPC] Fix rmb to order cacheable vs. noncacheable lwsync is explicitly defined not to have any effect on the ordering of accesses to device memory, so it cannot be used for rmb(). sync appears to be the only barrier which fits the bill. Signed-off-by: Nick Piggin Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/include/asm-powerpc/system.h b/include/asm-powerpc/system.h index 2b6559a..5235f87 100644 --- a/include/asm-powerpc/system.h +++ b/include/asm-powerpc/system.h @@ -34,7 +34,7 @@ * SMP since it is only used to order updates to system memory. */ #define mb() __asm__ __volatile__ ("sync" : : : "memory") -#define rmb() __asm__ __volatile__ (__stringify(LWSYNC) : : : "memory") +#define rmb() __asm__ __volatile__ ("sync" : : : "memory") #define wmb() __asm__ __volatile__ ("sync" : : : "memory") #define read_barrier_depends() do { } while(0) -- cgit v0.10.2 From 476ff8a0e3b17fc23994255aa9fd917d599d2ec7 Mon Sep 17 00:00:00 2001 From: Emil Medve Date: Fri, 23 May 2008 05:49:22 +1000 Subject: [POWERPC] Fix return value check logic in debugfs virq_mapping setup debugfs_create_file() returns a non-NULL (non-zero) value in case of success, not a NULL value. This fixes this non-critical boot-time debugging error message: [ 1.316386] calling irq_debugfs_init+0x0/0x50 [ 1.316399] initcall irq_debugfs_init+0x0/0x50 returned -12 after 0 msecs [ 1.316411] initcall irq_debugfs_init+0x0/0x50 returned with error code -12 Signed-off-by: Emil Medve Acked-by: Michael Ellerman Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 2f73f70..bcc249d 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -1073,7 +1073,7 @@ static const struct file_operations virq_debug_fops = { static int __init irq_debugfs_init(void) { if (debugfs_create_file("virq_mapping", S_IRUGO, powerpc_debugfs_root, - NULL, &virq_debug_fops)) + NULL, &virq_debug_fops) == NULL) return -ENOMEM; return 0; -- cgit v0.10.2 From bad5232ba266ae2c666c17be236152fb2d8ada3b Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:20:04 +1000 Subject: [POWERPC] Add missing of_node_put in pseries/nvram.c of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/nvram.c b/arch/powerpc/platforms/pseries/nvram.c index f68903e..42f7e38 100644 --- a/arch/powerpc/platforms/pseries/nvram.c +++ b/arch/powerpc/platforms/pseries/nvram.c @@ -131,8 +131,10 @@ int __init pSeries_nvram_init(void) return -ENODEV; nbytes_p = of_get_property(nvram, "#bytes", &proplen); - if (nbytes_p == NULL || proplen != sizeof(unsigned int)) + if (nbytes_p == NULL || proplen != sizeof(unsigned int)) { + of_node_put(nvram); return -EIO; + } nvram_size = *nbytes_p; -- cgit v0.10.2 From 8b9dba2ce28f64246198704b23f133bed5429e62 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:20:42 +1000 Subject: [POWERPC] Add missing of_node_put in drivers/macintosh/smu.c of_node_put is needed before discarding a value received from of_find_node_by_type, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; struct device_node *n2; statement S; identifier f1,f2; expression E1,E2; constant C; @@ n = of_find_node_by_type(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f1(n,...) when != E1 = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n2 = f2(n,...) | E2 = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index 77ad192..d86d57a 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -483,12 +483,15 @@ int __init smu_init (void) if (smu_cmdbuf_abs == 0) { printk(KERN_ERR "SMU: Command buffer not allocated !\n"); + of_node_put(np); return -EINVAL; } smu = alloc_bootmem(sizeof(struct smu_device)); - if (smu == NULL) + if (smu == NULL) { + of_node_put(np); return -ENOMEM; + } memset(smu, 0, sizeof(*smu)); spin_lock_init(&smu->lock); -- cgit v0.10.2 From 958a65f205fdc5ce5461d79376073b89acc51b31 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 9 Jun 2008 22:21:51 +1000 Subject: [POWERPC] Add missing of_node_put in drivers/macintosh/therm_adt746x.c of_node_put is needed before discarding a value received from of_find_node_by_name, eg in error handling code. The semantic patch that makes the change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @@ struct device_node *n; struct device_node *n1; statement S; identifier f; expression E; constant C; @@ n = of_find_node_by_name(...) ... if (!n) S ... when != of_node_put(n) when != n1 = f(n,...) when != E = n when any when strict ( + of_node_put(n); return -C; | of_node_put(n); | n1 = f(n,...) | E = n | return ...; ) // Signed-off-by: Julia Lawall Acked-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index 54f4942..5366dc93 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -562,18 +562,24 @@ thermostat_init(void) therm_type = ADT7460; else if (of_device_is_compatible(np, "adt7467")) therm_type = ADT7467; - else + else { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "hwsensor-params-version", NULL); printk(KERN_INFO "adt746x: version %d (%ssupported)\n", *prop, (*prop == 1)?"":"un"); - if (*prop != 1) + if (*prop != 1) { + of_node_put(np); return -ENODEV; + } prop = of_get_property(np, "reg", NULL); - if (!prop) + if (!prop) { + of_node_put(np); return -ENODEV; + } /* look for bus either by path or using "reg" */ if (strstr(np->full_name, "/i2c-bus@") != NULL) { @@ -610,6 +616,7 @@ thermostat_init(void) if (of_dev == NULL) { printk(KERN_ERR "Can't register temperatures device !\n"); + of_node_put(np); return -ENODEV; } -- cgit v0.10.2 From 8e01520c06c65a1a376059199fc24d4f3d606991 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Tue, 10 Jun 2008 09:26:10 +1000 Subject: [POWERPC] Fix warning in pseries/eeh_driver.c Fix this: /usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c: In function 'print_device_node_tree': /usr/src/devel/arch/powerpc/platforms/pseries/eeh_driver.c:55: warning: ISO C90 forbids mixed declarations and code also make that function look like it's part of Linux. Signed-off-by: Andrew Morton Acked-by: Benjamin Herrenschmidt Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/platforms/pseries/eeh_driver.c b/arch/powerpc/platforms/pseries/eeh_driver.c index 68ea5ee..8c1ca47 100644 --- a/arch/powerpc/platforms/pseries/eeh_driver.c +++ b/arch/powerpc/platforms/pseries/eeh_driver.c @@ -42,17 +42,20 @@ static inline const char * pcid_name (struct pci_dev *pdev) } #ifdef DEBUG -static void print_device_node_tree (struct pci_dn *pdn, int dent) +static void print_device_node_tree(struct pci_dn *pdn, int dent) { int i; - if (!pdn) return; - for (i=0;inode->name, pdn->eeh_mode, pdn->eeh_config_addr, pdn->eeh_pe_config_addr, pdn->node->full_name); dent += 3; - struct device_node *pc = pdn->node->child; + pc = pdn->node->child; while (pc) { print_device_node_tree(PCI_DN(pc), dent); pc = pc->sibling; -- cgit v0.10.2 From 305c73687157d677bee6f2a5dbee438d844a028c Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Wed, 11 Jun 2008 03:47:45 +1000 Subject: [POWERPC] Build fix for drivers/macintosh/mediabay.c This fixes the following build error with CONFIG_BLK_DEV_IDE_PMAC=n: <-- snip --> ... CC drivers/macintosh/mediabay.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c: In function 'check_media_bay': /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/macintosh/mediabay.c:428: error: 'struct media_bay_info' has no member named 'cd_index' make[3]: *** [drivers/macintosh/mediabay.o] Error 1 <-- snip --> Reported-by: Adrian Bunk Signed-off-by: Adrian Bunk Signed-off-by: Paul Mackerras diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index c34bdf8..818aba3 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -84,7 +84,7 @@ struct media_bay_info { int cd_irq; int cd_retry; #endif -#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY) +#if defined(CONFIG_BLK_DEV_IDE_PMAC) int cd_index; #endif }; @@ -417,6 +417,7 @@ static void poll_media_bay(struct media_bay_info* bay) } } +#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay(struct device_node *which_bay, int what) { int i; @@ -432,7 +433,6 @@ int check_media_bay(struct device_node *which_bay, int what) } EXPORT_SYMBOL(check_media_bay); -#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay_by_base(unsigned long base, int what) { int i; diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h index df111c3..b2efb33 100644 --- a/include/asm-powerpc/mediabay.h +++ b/include/asm-powerpc/mediabay.h @@ -17,8 +17,6 @@ #define MB_POWER 6 /* media bay contains a Power device (???) */ #define MB_NO 7 /* media bay contains nothing */ -int check_media_bay(struct device_node *which_bay, int what); - /* Number of bays in the machine or 0 */ extern int media_bay_count; @@ -29,6 +27,16 @@ int check_media_bay_by_base(unsigned long base, int what); /* called by IDE PMAC host driver to register IDE controller for media bay */ int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, int irq, ide_hwif_t *hwif); + +int check_media_bay(struct device_node *which_bay, int what); + +#else + +static inline int check_media_bay(struct device_node *which_bay, int what) +{ + return -ENODEV; +} + #endif #endif /* __KERNEL__ */ -- cgit v0.10.2 From 143580ecfb7999147e546cc3814023e233e95fa5 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 13 Jun 2008 07:19:06 +1000 Subject: [POWERPC] Fix bootwrapper builds with newer gcc versions GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the bootwrapper as we'd need to link with libgcc to get the implementation of the register save/restores. To workaround this issue, we just stole the save/restore code from gcc and simplified it down for our needs (integer only). Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index d53b84e..1cee2f9 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -51,7 +51,7 @@ $(addprefix $(obj)/,$(zlib) gunzip_util.o main.o): \ $(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader)) src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c -src-wlib := string.S crt0.S stdio.c main.c \ +src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \ $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \ ns16550.c serial.c simple_alloc.c div64.S util.S \ gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \ diff --git a/arch/powerpc/boot/crtsavres.S b/arch/powerpc/boot/crtsavres.S new file mode 100644 index 0000000..f3d9b35 --- /dev/null +++ b/arch/powerpc/boot/crtsavres.S @@ -0,0 +1,233 @@ +/* + * Special support for eabi and SVR4 + * + * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * Written By Michael Meissner + * + * Based on gcc/config/rs6000/crtsavres.asm from gcc + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * In addition to the permissions in the GNU General Public License, the + * Free Software Foundation gives you unlimited permission to link the + * compiled version of this file with other programs, and to distribute + * those programs without any restriction coming from the use of this + * file. (The General Public License restrictions do apply in other + * respects; for example, they cover modification of the file, and + * distribution when not linked into another program.) + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + * As a special exception, if you link this library with files + * compiled with GCC to produce an executable, this does not cause + * the resulting executable to be covered by the GNU General Public License. + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + */ + + .file "crtsavres.S" + .section ".text" + +/* On PowerPC64 Linux, these functions are provided by the linker. */ +#ifndef __powerpc64__ + +#define _GLOBAL(name) \ + .type name,@function; \ + .globl name; \ +name: + +/* Routines for saving integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer save area. */ + +_GLOBAL(_savegpr_14) +_GLOBAL(_save32gpr_14) + stw 14,-72(11) /* save gp registers */ +_GLOBAL(_savegpr_15) +_GLOBAL(_save32gpr_15) + stw 15,-68(11) +_GLOBAL(_savegpr_16) +_GLOBAL(_save32gpr_16) + stw 16,-64(11) +_GLOBAL(_savegpr_17) +_GLOBAL(_save32gpr_17) + stw 17,-60(11) +_GLOBAL(_savegpr_18) +_GLOBAL(_save32gpr_18) + stw 18,-56(11) +_GLOBAL(_savegpr_19) +_GLOBAL(_save32gpr_19) + stw 19,-52(11) +_GLOBAL(_savegpr_20) +_GLOBAL(_save32gpr_20) + stw 20,-48(11) +_GLOBAL(_savegpr_21) +_GLOBAL(_save32gpr_21) + stw 21,-44(11) +_GLOBAL(_savegpr_22) +_GLOBAL(_save32gpr_22) + stw 22,-40(11) +_GLOBAL(_savegpr_23) +_GLOBAL(_save32gpr_23) + stw 23,-36(11) +_GLOBAL(_savegpr_24) +_GLOBAL(_save32gpr_24) + stw 24,-32(11) +_GLOBAL(_savegpr_25) +_GLOBAL(_save32gpr_25) + stw 25,-28(11) +_GLOBAL(_savegpr_26) +_GLOBAL(_save32gpr_26) + stw 26,-24(11) +_GLOBAL(_savegpr_27) +_GLOBAL(_save32gpr_27) + stw 27,-20(11) +_GLOBAL(_savegpr_28) +_GLOBAL(_save32gpr_28) + stw 28,-16(11) +_GLOBAL(_savegpr_29) +_GLOBAL(_save32gpr_29) + stw 29,-12(11) +_GLOBAL(_savegpr_30) +_GLOBAL(_save32gpr_30) + stw 30,-8(11) +_GLOBAL(_savegpr_31) +_GLOBAL(_save32gpr_31) + stw 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14) +_GLOBAL(_rest32gpr_14) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15) +_GLOBAL(_rest32gpr_15) + lwz 15,-68(11) +_GLOBAL(_restgpr_16) +_GLOBAL(_rest32gpr_16) + lwz 16,-64(11) +_GLOBAL(_restgpr_17) +_GLOBAL(_rest32gpr_17) + lwz 17,-60(11) +_GLOBAL(_restgpr_18) +_GLOBAL(_rest32gpr_18) + lwz 18,-56(11) +_GLOBAL(_restgpr_19) +_GLOBAL(_rest32gpr_19) + lwz 19,-52(11) +_GLOBAL(_restgpr_20) +_GLOBAL(_rest32gpr_20) + lwz 20,-48(11) +_GLOBAL(_restgpr_21) +_GLOBAL(_rest32gpr_21) + lwz 21,-44(11) +_GLOBAL(_restgpr_22) +_GLOBAL(_rest32gpr_22) + lwz 22,-40(11) +_GLOBAL(_restgpr_23) +_GLOBAL(_rest32gpr_23) + lwz 23,-36(11) +_GLOBAL(_restgpr_24) +_GLOBAL(_rest32gpr_24) + lwz 24,-32(11) +_GLOBAL(_restgpr_25) +_GLOBAL(_rest32gpr_25) + lwz 25,-28(11) +_GLOBAL(_restgpr_26) +_GLOBAL(_rest32gpr_26) + lwz 26,-24(11) +_GLOBAL(_restgpr_27) +_GLOBAL(_rest32gpr_27) + lwz 27,-20(11) +_GLOBAL(_restgpr_28) +_GLOBAL(_rest32gpr_28) + lwz 28,-16(11) +_GLOBAL(_restgpr_29) +_GLOBAL(_rest32gpr_29) + lwz 29,-12(11) +_GLOBAL(_restgpr_30) +_GLOBAL(_rest32gpr_30) + lwz 30,-8(11) +_GLOBAL(_restgpr_31) +_GLOBAL(_rest32gpr_31) + lwz 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14_x) +_GLOBAL(_rest32gpr_14_x) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15_x) +_GLOBAL(_rest32gpr_15_x) + lwz 15,-68(11) +_GLOBAL(_restgpr_16_x) +_GLOBAL(_rest32gpr_16_x) + lwz 16,-64(11) +_GLOBAL(_restgpr_17_x) +_GLOBAL(_rest32gpr_17_x) + lwz 17,-60(11) +_GLOBAL(_restgpr_18_x) +_GLOBAL(_rest32gpr_18_x) + lwz 18,-56(11) +_GLOBAL(_restgpr_19_x) +_GLOBAL(_rest32gpr_19_x) + lwz 19,-52(11) +_GLOBAL(_restgpr_20_x) +_GLOBAL(_rest32gpr_20_x) + lwz 20,-48(11) +_GLOBAL(_restgpr_21_x) +_GLOBAL(_rest32gpr_21_x) + lwz 21,-44(11) +_GLOBAL(_restgpr_22_x) +_GLOBAL(_rest32gpr_22_x) + lwz 22,-40(11) +_GLOBAL(_restgpr_23_x) +_GLOBAL(_rest32gpr_23_x) + lwz 23,-36(11) +_GLOBAL(_restgpr_24_x) +_GLOBAL(_rest32gpr_24_x) + lwz 24,-32(11) +_GLOBAL(_restgpr_25_x) +_GLOBAL(_rest32gpr_25_x) + lwz 25,-28(11) +_GLOBAL(_restgpr_26_x) +_GLOBAL(_rest32gpr_26_x) + lwz 26,-24(11) +_GLOBAL(_restgpr_27_x) +_GLOBAL(_rest32gpr_27_x) + lwz 27,-20(11) +_GLOBAL(_restgpr_28_x) +_GLOBAL(_rest32gpr_28_x) + lwz 28,-16(11) +_GLOBAL(_restgpr_29_x) +_GLOBAL(_rest32gpr_29_x) + lwz 29,-12(11) +_GLOBAL(_restgpr_30_x) +_GLOBAL(_rest32gpr_30_x) + lwz 30,-8(11) +_GLOBAL(_restgpr_31_x) +_GLOBAL(_rest32gpr_31_x) + lwz 0,4(11) + lwz 31,-4(11) + mtlr 0 + mr 1,11 + blr +#endif -- cgit v0.10.2 From da3de6df33f5f42ff9dc40093fbc884f524c9a49 Mon Sep 17 00:00:00 2001 From: Kumar Gala Date: Fri, 13 Jun 2008 07:20:58 +1000 Subject: [POWERPC] Fix -Os kernel builds with newer gcc versions GCC 4.4.x looks to be adding support for generating out-of-line register saves/restores based on: http://gcc.gnu.org/ml/gcc-patches/2008-04/msg01678.html This breaks the kernel if we enable CONFIG_CC_OPTIMIZE_FOR_SIZE. To fix this we add the use the save/restore code from gcc and simplified it down for our needs (integer only). Additionally, we have to link this code into each module. The other solution was to add EXPORT_SYMBOL() which meant going through the trampoline which seemed nonsensical for these out-of-line routines. Finally, we add some checks to prom_init_check.sh to ignore the out-of-line save/restore functions. Signed-off-by: Kumar Gala Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile index 86096cc..b7d4c4c 100644 --- a/arch/powerpc/Makefile +++ b/arch/powerpc/Makefile @@ -96,6 +96,8 @@ endif else KBUILD_CFLAGS += $(call cc-option,-mtune=power4) endif +else +LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o endif ifeq ($(CONFIG_TUNE_CELL),y) diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh index 31729a9..2c7e8e8 100644 --- a/arch/powerpc/kernel/prom_init_check.sh +++ b/arch/powerpc/kernel/prom_init_check.sh @@ -48,6 +48,20 @@ do fi done + # ignore register save/restore funcitons + if [ "${UNDEF:0:9}" = "_restgpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:11}" = "_rest32gpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:9}" = "_savegpr_" ]; then + OK=1 + fi + if [ "${UNDEF:0:11}" = "_save32gpr_" ]; then + OK=1 + fi + if [ $OK -eq 0 ]; then ERROR=1 echo "Error: External symbol '$UNDEF' referenced" \ diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index c71d37d..e522b06 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -9,7 +9,7 @@ endif ifeq ($(CONFIG_PPC_MERGE),y) obj-y := string.o alloc.o \ checksum_$(CONFIG_WORD_SIZE).o -obj-$(CONFIG_PPC32) += div64.o copy_32.o +obj-$(CONFIG_PPC32) += div64.o copy_32.o crtsavres.o obj-$(CONFIG_HAS_IOMEM) += devres.o endif diff --git a/arch/powerpc/lib/crtsavres.S b/arch/powerpc/lib/crtsavres.S new file mode 100644 index 0000000..70a9cd8 --- /dev/null +++ b/arch/powerpc/lib/crtsavres.S @@ -0,0 +1,229 @@ +/* + * Special support for eabi and SVR4 + * + * Copyright (C) 1995, 1996, 1998, 2000, 2001 Free Software Foundation, Inc. + * Copyright 2008 Freescale Semiconductor, Inc. + * Written By Michael Meissner + * + * Based on gcc/config/rs6000/crtsavres.asm from gcc + * + * This file is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * In addition to the permissions in the GNU General Public License, the + * Free Software Foundation gives you unlimited permission to link the + * compiled version of this file with other programs, and to distribute + * those programs without any restriction coming from the use of this + * file. (The General Public License restrictions do apply in other + * respects; for example, they cover modification of the file, and + * distribution when not linked into another program.) + * + * This file is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; see the file COPYING. If not, write to + * the Free Software Foundation, 51 Franklin Street, Fifth Floor, + * Boston, MA 02110-1301, USA. + * + * As a special exception, if you link this library with files + * compiled with GCC to produce an executable, this does not cause + * the resulting executable to be covered by the GNU General Public License. + * This exception does not however invalidate any other reasons why + * the executable file might be covered by the GNU General Public License. + */ + +#include + + .file "crtsavres.S" + .section ".text" + +#ifdef CONFIG_CC_OPTIMIZE_FOR_SIZE + +/* Routines for saving integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer save area. */ + +_GLOBAL(_savegpr_14) +_GLOBAL(_save32gpr_14) + stw 14,-72(11) /* save gp registers */ +_GLOBAL(_savegpr_15) +_GLOBAL(_save32gpr_15) + stw 15,-68(11) +_GLOBAL(_savegpr_16) +_GLOBAL(_save32gpr_16) + stw 16,-64(11) +_GLOBAL(_savegpr_17) +_GLOBAL(_save32gpr_17) + stw 17,-60(11) +_GLOBAL(_savegpr_18) +_GLOBAL(_save32gpr_18) + stw 18,-56(11) +_GLOBAL(_savegpr_19) +_GLOBAL(_save32gpr_19) + stw 19,-52(11) +_GLOBAL(_savegpr_20) +_GLOBAL(_save32gpr_20) + stw 20,-48(11) +_GLOBAL(_savegpr_21) +_GLOBAL(_save32gpr_21) + stw 21,-44(11) +_GLOBAL(_savegpr_22) +_GLOBAL(_save32gpr_22) + stw 22,-40(11) +_GLOBAL(_savegpr_23) +_GLOBAL(_save32gpr_23) + stw 23,-36(11) +_GLOBAL(_savegpr_24) +_GLOBAL(_save32gpr_24) + stw 24,-32(11) +_GLOBAL(_savegpr_25) +_GLOBAL(_save32gpr_25) + stw 25,-28(11) +_GLOBAL(_savegpr_26) +_GLOBAL(_save32gpr_26) + stw 26,-24(11) +_GLOBAL(_savegpr_27) +_GLOBAL(_save32gpr_27) + stw 27,-20(11) +_GLOBAL(_savegpr_28) +_GLOBAL(_save32gpr_28) + stw 28,-16(11) +_GLOBAL(_savegpr_29) +_GLOBAL(_save32gpr_29) + stw 29,-12(11) +_GLOBAL(_savegpr_30) +_GLOBAL(_save32gpr_30) + stw 30,-8(11) +_GLOBAL(_savegpr_31) +_GLOBAL(_save32gpr_31) + stw 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14) +_GLOBAL(_rest32gpr_14) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15) +_GLOBAL(_rest32gpr_15) + lwz 15,-68(11) +_GLOBAL(_restgpr_16) +_GLOBAL(_rest32gpr_16) + lwz 16,-64(11) +_GLOBAL(_restgpr_17) +_GLOBAL(_rest32gpr_17) + lwz 17,-60(11) +_GLOBAL(_restgpr_18) +_GLOBAL(_rest32gpr_18) + lwz 18,-56(11) +_GLOBAL(_restgpr_19) +_GLOBAL(_rest32gpr_19) + lwz 19,-52(11) +_GLOBAL(_restgpr_20) +_GLOBAL(_rest32gpr_20) + lwz 20,-48(11) +_GLOBAL(_restgpr_21) +_GLOBAL(_rest32gpr_21) + lwz 21,-44(11) +_GLOBAL(_restgpr_22) +_GLOBAL(_rest32gpr_22) + lwz 22,-40(11) +_GLOBAL(_restgpr_23) +_GLOBAL(_rest32gpr_23) + lwz 23,-36(11) +_GLOBAL(_restgpr_24) +_GLOBAL(_rest32gpr_24) + lwz 24,-32(11) +_GLOBAL(_restgpr_25) +_GLOBAL(_rest32gpr_25) + lwz 25,-28(11) +_GLOBAL(_restgpr_26) +_GLOBAL(_rest32gpr_26) + lwz 26,-24(11) +_GLOBAL(_restgpr_27) +_GLOBAL(_rest32gpr_27) + lwz 27,-20(11) +_GLOBAL(_restgpr_28) +_GLOBAL(_rest32gpr_28) + lwz 28,-16(11) +_GLOBAL(_restgpr_29) +_GLOBAL(_rest32gpr_29) + lwz 29,-12(11) +_GLOBAL(_restgpr_30) +_GLOBAL(_rest32gpr_30) + lwz 30,-8(11) +_GLOBAL(_restgpr_31) +_GLOBAL(_rest32gpr_31) + lwz 31,-4(11) + blr + +/* Routines for restoring integer registers, called by the compiler. */ +/* Called with r11 pointing to the stack header word of the caller of the */ +/* function, just beyond the end of the integer restore area. */ + +_GLOBAL(_restgpr_14_x) +_GLOBAL(_rest32gpr_14_x) + lwz 14,-72(11) /* restore gp registers */ +_GLOBAL(_restgpr_15_x) +_GLOBAL(_rest32gpr_15_x) + lwz 15,-68(11) +_GLOBAL(_restgpr_16_x) +_GLOBAL(_rest32gpr_16_x) + lwz 16,-64(11) +_GLOBAL(_restgpr_17_x) +_GLOBAL(_rest32gpr_17_x) + lwz 17,-60(11) +_GLOBAL(_restgpr_18_x) +_GLOBAL(_rest32gpr_18_x) + lwz 18,-56(11) +_GLOBAL(_restgpr_19_x) +_GLOBAL(_rest32gpr_19_x) + lwz 19,-52(11) +_GLOBAL(_restgpr_20_x) +_GLOBAL(_rest32gpr_20_x) + lwz 20,-48(11) +_GLOBAL(_restgpr_21_x) +_GLOBAL(_rest32gpr_21_x) + lwz 21,-44(11) +_GLOBAL(_restgpr_22_x) +_GLOBAL(_rest32gpr_22_x) + lwz 22,-40(11) +_GLOBAL(_restgpr_23_x) +_GLOBAL(_rest32gpr_23_x) + lwz 23,-36(11) +_GLOBAL(_restgpr_24_x) +_GLOBAL(_rest32gpr_24_x) + lwz 24,-32(11) +_GLOBAL(_restgpr_25_x) +_GLOBAL(_rest32gpr_25_x) + lwz 25,-28(11) +_GLOBAL(_restgpr_26_x) +_GLOBAL(_rest32gpr_26_x) + lwz 26,-24(11) +_GLOBAL(_restgpr_27_x) +_GLOBAL(_rest32gpr_27_x) + lwz 27,-20(11) +_GLOBAL(_restgpr_28_x) +_GLOBAL(_rest32gpr_28_x) + lwz 28,-16(11) +_GLOBAL(_restgpr_29_x) +_GLOBAL(_rest32gpr_29_x) + lwz 29,-12(11) +_GLOBAL(_restgpr_30_x) +_GLOBAL(_rest32gpr_30_x) + lwz 30,-8(11) +_GLOBAL(_restgpr_31_x) +_GLOBAL(_rest32gpr_31_x) + lwz 0,4(11) + lwz 31,-4(11) + mtlr 0 + mr 1,11 + blr +#endif -- cgit v0.10.2 From 4a96db3c780f30432653f99cbff193ba3e474e0b Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Mon, 16 Jun 2008 10:50:13 +1000 Subject: [POWERPC] Remove ppc32's export of console_drivers There are no in-tree uses of the export any more and in linux-next there is a change that exports it globally which causes warnings: WARNING: vmlinux: 'console_drivers' exported twice. Previous export was in vmlinux and in one case (mpc85xx_defconfig) a build error: kernel/built-in.o: In function `__crc_console_drivers': (*ABS*+0x1eb0e6f5): multiple definition of `__crc_console_drivers' So remove the export now. Also, there is no longer any need to include linux/console.h. Signed-off-by: Stephen Rothwell Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/ppc_ksyms.c b/arch/powerpc/kernel/ppc_ksyms.c index cf6b5a7..d3ac631 100644 --- a/arch/powerpc/kernel/ppc_ksyms.c +++ b/arch/powerpc/kernel/ppc_ksyms.c @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -160,7 +159,6 @@ EXPORT_SYMBOL(screen_info); EXPORT_SYMBOL(timer_interrupt); EXPORT_SYMBOL(irq_desc); EXPORT_SYMBOL(tb_ticks_per_jiffy); -EXPORT_SYMBOL(console_drivers); EXPORT_SYMBOL(cacheable_memcpy); #endif -- cgit v0.10.2 From 313348db0bff8911b1219e6338342d0527072741 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Mon, 16 Jun 2008 21:14:12 +1000 Subject: [POWERPC] Turn on ATA_SFF so we get SATA_SVW back in defconfigs This enables CONFIG_ATA_SFF in the defconfigs that are intended to work on a G5 powermac, i.e. g5_defconfig and ppc64_defconfig. Since the support for the SATA cell in the K2 chipset is provided by the sata_svw.c driver, and that depends on CONFIG_ATA_SFF, we need to turn that and CONFIG_SATA_SVW back on so we can get to the hard disk on G5s. Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index db34909..0ccc6e4 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:01:18 2008 +# Linux kernel version: 2.6.26-rc6 +# Mon Jun 16 21:08:31 2008 # CONFIG_PPC64=y @@ -597,7 +597,61 @@ CONFIG_ATA=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set # CONFIG_SATA_SIL24 is not set -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -1230,6 +1284,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ACM=m CONFIG_USB_PRINTER=y +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1345,6 +1400,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index 40f84fa..ce250bc 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc3 -# Tue May 20 20:03:02 2008 +# Linux kernel version: 2.6.26-rc6 +# Mon Jun 16 21:11:19 2008 # CONFIG_PPC64=y @@ -763,7 +763,63 @@ CONFIG_ATA_NONSTANDARD=y CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set CONFIG_SATA_SIL24=y -# CONFIG_ATA_SFF is not set +CONFIG_ATA_SFF=y +CONFIG_SATA_SVW=y +# CONFIG_ATA_PIIX is not set +# CONFIG_SATA_MV is not set +# CONFIG_SATA_NV is not set +# CONFIG_PDC_ADMA is not set +# CONFIG_SATA_QSTOR is not set +# CONFIG_SATA_PROMISE is not set +# CONFIG_SATA_SX4 is not set +# CONFIG_SATA_SIL is not set +# CONFIG_SATA_SIS is not set +# CONFIG_SATA_ULI is not set +# CONFIG_SATA_VIA is not set +# CONFIG_SATA_VITESSE is not set +# CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set +# CONFIG_PATA_AMD is not set +# CONFIG_PATA_ARTOP is not set +# CONFIG_PATA_ATIIXP is not set +# CONFIG_PATA_CMD640_PCI is not set +# CONFIG_PATA_CMD64X is not set +# CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set +# CONFIG_PATA_CYPRESS is not set +# CONFIG_PATA_EFAR is not set +# CONFIG_ATA_GENERIC is not set +# CONFIG_PATA_HPT366 is not set +# CONFIG_PATA_HPT37X is not set +# CONFIG_PATA_HPT3X2N is not set +# CONFIG_PATA_HPT3X3 is not set +# CONFIG_PATA_IT821X is not set +# CONFIG_PATA_IT8213 is not set +# CONFIG_PATA_JMICRON is not set +# CONFIG_PATA_TRIFLEX is not set +# CONFIG_PATA_MARVELL is not set +# CONFIG_PATA_MPIIX is not set +# CONFIG_PATA_OLDPIIX is not set +# CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_OPTI is not set +# CONFIG_PATA_OPTIDMA is not set +# CONFIG_PATA_PCMCIA is not set +# CONFIG_PATA_PDC_OLD is not set +# CONFIG_PATA_RADISYS is not set +# CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set +# CONFIG_PATA_SERVERWORKS is not set +# CONFIG_PATA_PDC2027X is not set +# CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set +# CONFIG_PATA_VIA is not set +# CONFIG_PATA_WINBOND is not set +# CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCC is not set +# CONFIG_PATA_SCH is not set CONFIG_MD=y CONFIG_BLK_DEV_MD=y CONFIG_MD_LINEAR=y @@ -1478,6 +1534,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # # CONFIG_USB_ACM is not set # CONFIG_USB_PRINTER is not set +# CONFIG_USB_WDM is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -1537,6 +1594,7 @@ CONFIG_USB_APPLEDISPLAY=m # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set +# CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1597,6 +1655,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_PCF8583 is not set # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set # # SPI RTC drivers @@ -1617,6 +1676,7 @@ CONFIG_RTC_DRV_DS1307=y # # on-CPU RTC drivers # +CONFIG_RTC_DRV_PPC=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set -- cgit v0.10.2 From e4f3ec063421bdbcb93330e72aa3eeedb6a0d85a Mon Sep 17 00:00:00 2001 From: Paul Collins Date: Sat, 14 Jun 2008 14:14:59 +1200 Subject: udf: restore UDFFS_DEBUG to being undefined by default Commit 706047a79725b585cf272fdefc234b31b6545c72, "udf: Fix compilation warnings when UDF debug is on" inadvertently (I assume) enabled debugging messages by default for UDF. This patch disables them again. Signed-off-by: Paul Collins Signed-off-by: Jan Kara diff --git a/fs/udf/udfdecl.h b/fs/udf/udfdecl.h index 8fa9c2d..8ec865d 100644 --- a/fs/udf/udfdecl.h +++ b/fs/udf/udfdecl.h @@ -16,7 +16,7 @@ #define UDF_PREALLOCATE #define UDF_DEFAULT_PREALLOC_BLOCKS 8 -#define UDFFS_DEBUG +#undef UDFFS_DEBUG #ifdef UDFFS_DEBUG #define udf_debug(f, a...) \ -- cgit v0.10.2 From 9f9115d880ca550922434aee05ca18796c58eb99 Mon Sep 17 00:00:00 2001 From: Clemens Ladisch Date: Mon, 16 Jun 2008 14:13:52 +0200 Subject: sound: oxygen: fix NULL pointer dereference when loading snd-oxygen Check that model->control_filter is set before trying to call it. Signed-off-by: Clemens Ladisch Signed-off-by: Takashi Iwai diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c index cc0cdda..6facac5 100644 --- a/sound/pci/oxygen/oxygen_mixer.c +++ b/sound/pci/oxygen/oxygen_mixer.c @@ -936,11 +936,13 @@ static int add_controls(struct oxygen *chip, for (i = 0; i < count; ++i) { template = controls[i]; - err = chip->model->control_filter(&template); - if (err < 0) - return err; - if (err == 1) - continue; + if (chip->model->control_filter) { + err = chip->model->control_filter(&template); + if (err < 0) + return err; + if (err == 1) + continue; + } if (!strcmp(template.name, "Master Playback Volume") && chip->model->dac_tlv) { template.tlv.p = chip->model->dac_tlv; -- cgit v0.10.2 From 497d2adcbf50bccec6c56620d61d77429d23993a Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 6 Jun 2008 14:23:06 +0100 Subject: [MIPS] Export empty_zero_page for sake of the ext4 module. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index ecd562d..137c14b 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -71,6 +71,7 @@ DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); * don't have to care about aliases on other CPUs. */ unsigned long empty_zero_page, zero_page_mask; +EXPORT_SYMBOL_GPL(empty_zero_page); /* * Not static inline because used by IP27 special magic initialization code -- cgit v0.10.2 From 6b7d0b2fb6da3f6182f2bd162bf02ed4aed1813f Mon Sep 17 00:00:00 2001 From: bruno randolf Date: Fri, 6 Jun 2008 16:42:03 +0200 Subject: [MIPS] Alchemy: Add au1500 reserved interrupt In the conversion done in the commits 95c4eb3ef4484ca85da5c98780d358cffd546b90 9d360ab4a7568a8d177280f651a8a772ae52b9b9 [MIPS] Alchemy: Renumber interrupts so irq_cpu can work. one reserved interrupt on au1500 was missed. this broke the au1000 ethernet driver. Signed-off-by: Bruno Randolf Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/mach-au1x00/au1000.h b/include/asm-mips/mach-au1x00/au1000.h index 1b5064d..0d302ba 100644 --- a/include/asm-mips/mach-au1x00/au1000.h +++ b/include/asm-mips/mach-au1x00/au1000.h @@ -615,6 +615,7 @@ enum soc_au1500_ints { AU1000_RTC_MATCH1_INT, AU1000_RTC_MATCH2_INT, AU1500_PCI_ERR_INT, + AU1500_RESERVED_INT, AU1000_USB_DEV_REQ_INT, AU1000_USB_DEV_SUS_INT, AU1000_USB_HOST_INT, -- cgit v0.10.2 From d0f9cbd4b29c3d208d6b31519cbb940d98d61e7d Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Mon, 9 Jun 2008 17:20:03 +0100 Subject: [MIPS] SB1250: Initialize io_map_base Correctly initialize io_map_base for the SB1250 PCI controller as required for proper iomap support. Based on a proposal from Daniel Jacobowitz. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/pci-sb1250.c b/arch/mips/pci/pci-sb1250.c index 42e4d2c..2a09ad9 100644 --- a/arch/mips/pci/pci-sb1250.c +++ b/arch/mips/pci/pci-sb1250.c @@ -207,6 +207,7 @@ struct pci_controller sb1250_controller = { static int __init sb1250_pcibios_init(void) { + void __iomem *io_map_base; uint32_t cmdreg; uint64_t reg; extern int pci_probe_only; @@ -253,12 +254,13 @@ static int __init sb1250_pcibios_init(void) * works correctly with most of Linux's drivers. * XXX ehs: Should this happen in PCI Device mode? */ - - set_io_port_base((unsigned long) - ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 65536)); isa_slot_offset = (unsigned long) ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES_32, 1024 * 1024); + io_map_base = ioremap(A_PHYS_LDTPCI_IO_MATCH_BYTES, 1024 * 1024); + sb1250_controller.io_map_base = io_map_base; + set_io_port_base((unsigned long)io_map_base); + #ifdef CONFIG_SIBYTE_HAS_LDT /* * Also check the LDT bridge's enable, just in case we didn't -- cgit v0.10.2 From 0e27d7931157fa89cc9afb7735095a0d81ce8fec Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:16 +0200 Subject: [MIPS] Better load address for big endian SNI RM Use better load address for big endian kernels to avoid clashes with PROM / SASH. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 69648d0..1ec8e35 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -565,7 +565,11 @@ load-$(CONFIG_BCM47XX) := 0xffffffff80001000 # core-$(CONFIG_SNI_RM) += arch/mips/sni/ cflags-$(CONFIG_SNI_RM) += -Iinclude/asm-mips/mach-rm +ifdef CONFIG_CPU_LITTLE_ENDIAN load-$(CONFIG_SNI_RM) += 0xffffffff80600000 +else +load-$(CONFIG_SNI_RM) += 0xffffffff80030000 +endif all-$(CONFIG_SNI_RM) := vmlinux.ecoff # -- cgit v0.10.2 From 330117ff2723566e8eb7ad43223081b557f1540e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 27 May 2008 01:15:20 +0200 Subject: [MIPS] Add RM200 with R5000 CPU to known ARC machines RM200 with R5ks have a little bit different arcname. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/fw/arc/identify.c b/arch/mips/fw/arc/identify.c index 28dfd2e..2306698 100644 --- a/arch/mips/fw/arc/identify.c +++ b/arch/mips/fw/arc/identify.c @@ -67,6 +67,11 @@ static struct smatch mach_table[] = { .liname = "SNI RM200_PCI", .type = MACH_SNI_RM200_PCI, .flags = PROM_FLAG_DONT_FREE_TEMP, + }, { + .arcname = "RM200PCI-R5K", + .liname = "SNI RM200_PCI-R5K", + .type = MACH_SNI_RM200_PCI, + .flags = PROM_FLAG_DONT_FREE_TEMP, } }; -- cgit v0.10.2 From 89052bd7b393434f7c573ce6a3b88c5f143586d2 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 12 Jun 2008 17:26:02 +0100 Subject: [MIPS] Fix build for PNX platforms. Build error was caused by commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index 643c8bc..c41ea22 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -1226,6 +1226,28 @@ void au1x00_fixup_config_od(void) } } +/* CP0 hazard avoidance. */ +#define NXP_BARRIER() \ + __asm__ __volatile__( \ + ".set noreorder\n\t" \ + "nop; nop; nop; nop; nop; nop;\n\t" \ + ".set reorder\n\t") + +static void nxp_pr4450_fixup_config(void) +{ + unsigned long config0; + + config0 = read_c0_config(); + + /* clear all three cache coherency fields */ + config0 &= ~(0x7 | (7 << 25) | (7 << 28)); + config0 |= (((_page_cachable_default >> _CACHE_SHIFT) << 0) | + ((_page_cachable_default >> _CACHE_SHIFT) << 25) | + ((_page_cachable_default >> _CACHE_SHIFT) << 28)); + write_c0_config(config0); + NXP_BARRIER(); +} + static int __cpuinitdata cca = -1; static int __init cca_setup(char *str) @@ -1271,6 +1293,10 @@ static void __cpuinit coherency_setup(void) case CPU_AU1500: /* rev. AB */ au1x00_fixup_config_od(); break; + + case PRID_IMP_PR4450: + nxp_pr4450_fixup_config(); + break; } } diff --git a/arch/mips/nxp/pnx8550/jbs/board_setup.c b/arch/mips/nxp/pnx8550/jbs/board_setup.c index f92826e..57dd903 100644 --- a/arch/mips/nxp/pnx8550/jbs/board_setup.c +++ b/arch/mips/nxp/pnx8550/jbs/board_setup.c @@ -47,16 +47,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); - BARRIER; + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ diff --git a/arch/mips/nxp/pnx8550/stb810/board_setup.c b/arch/mips/nxp/pnx8550/stb810/board_setup.c index 1282c27..af2a55e 100644 --- a/arch/mips/nxp/pnx8550/stb810/board_setup.c +++ b/arch/mips/nxp/pnx8550/stb810/board_setup.c @@ -33,15 +33,7 @@ void __init board_setup(void) { - unsigned long config0, configpr; - - config0 = read_c0_config(); - - /* clear all three cache coherency fields */ - config0 &= ~(0x7 | (7<<25) | (7<<28)); - config0 |= (CONF_CM_DEFAULT | (CONF_CM_DEFAULT<<25) | - (CONF_CM_DEFAULT<<28)); - write_c0_config(config0); + unsigned long configpr; configpr = read_c0_config7(); configpr |= (1<<19); /* enable tlb */ diff --git a/include/asm-mips/pgtable-bits.h b/include/asm-mips/pgtable-bits.h index 60e2f93..51b34a4 100644 --- a/include/asm-mips/pgtable-bits.h +++ b/include/asm-mips/pgtable-bits.h @@ -134,6 +134,4 @@ #define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_MODIFIED | _CACHE_MASK) -#define CONF_CM_DEFAULT (PAGE_CACHABLE_DEFAULT>>_CACHE_SHIFT) - #endif /* _ASM_PGTABLE_BITS_H */ -- cgit v0.10.2 From 7bd0fea2c590d94995c2ee0b32e786c1c62621fa Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Fri, 30 May 2008 13:07:21 +0900 Subject: [MIPS] Fix the fix for divide by zero error in build_{clear,copy}_page Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/page.c b/arch/mips/mm/page.c index cab81f4..1edf0cb 100644 --- a/arch/mips/mm/page.c +++ b/arch/mips/mm/page.c @@ -460,7 +460,7 @@ void __cpuinit build_copy_page(void) build_copy_load_pref(&buf, -off); off -= cache_line_size; } - off = cache_line_size ? min(8, pref_bias_copy_load / cache_line_size) * + off = cache_line_size ? min(8, pref_bias_copy_store / cache_line_size) * cache_line_size : 0; while (off) { build_copy_store_pref(&buf, -off); -- cgit v0.10.2 From 63a4881a7dd45038f46caa7c3c08b88b01cf9473 Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:14:10 +0100 Subject: [MIPS] Sibyte: Build RTC support as an object Build the SWARM platform library is as an object rather than an archive so that files which only contain symbols used by initcalls and do not provide any symbols that would pull them from an archive still work. Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 1ec8e35..ad36c94 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -538,19 +538,19 @@ cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ # Sibyte SWARM board # Sibyte BCM91x80 (BigSur) board # -libs-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CARMEL) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CARMEL) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHINE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHINE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_CRHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_CRHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_RHONE) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_RHONE) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SENTOSA) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SENTOSA) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_SWARM) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_SWARM) := 0xffffffff80100000 -libs-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ +core-$(CONFIG_SIBYTE_BIGSUR) += arch/mips/sibyte/swarm/ load-$(CONFIG_SIBYTE_BIGSUR) := 0xffffffff80100000 # diff --git a/arch/mips/sibyte/swarm/Makefile b/arch/mips/sibyte/swarm/Makefile index 2d62603..1775755 100644 --- a/arch/mips/sibyte/swarm/Makefile +++ b/arch/mips/sibyte/swarm/Makefile @@ -1,3 +1,3 @@ -lib-y = setup.o rtc_xicor1241.o rtc_m41t81.o +obj-y := setup.o rtc_xicor1241.o rtc_m41t81.o -lib-$(CONFIG_KGDB) += dbg_io.o +obj-$(CONFIG_KGDB) += dbg_io.o -- cgit v0.10.2 From 461a082f870c7fc6a0a245e2f93c9f0e3afbeddd Mon Sep 17 00:00:00 2001 From: "Maciej W. Rozycki" Date: Fri, 13 Jun 2008 00:10:00 +0100 Subject: [MIPS] Bring the SWARM defconfig up to date The SWARM defconfig file has not been regenerated for over a year now. Here is a patch to bring the file up to date. Additionally some important and sometimes confusing changes happened meanwhile. Here is the list of notable corresponding updates to the configuration: 1. CPU_SB1_PASS_2_2 is now selected rather than CPU_SB1_PASS_1. The latter requires a non-standard -msb1-pass1-workarounds option to be supported by GCC and I am told is quite rare anyway. [Ralf: Afaik -msb1-pass1-workarounds is available only in Monta Vista's special Sibyte gcc 3.0 variant and gcc 3.0 is too old to build a modern kernel anyway.] 2. PHYLIB and BROADCOM_PHY are both built in and NETDEV_1000 enabled as required by SB1250_MAC. 3. USB and USB_OHCI_HCD are enabled as there is an OHCI chip onboard. 4. TMPFS is enabled, because I use it. ;-) Signed-off-by: Maciej W. Rozycki Signed-off-by: Ralf Baechle diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig index 117470b..4b87998 100644 --- a/arch/mips/configs/sb1250-swarm_defconfig +++ b/arch/mips/configs/sb1250-swarm_defconfig @@ -1,67 +1,58 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:40 2007 +# Linux kernel version: 2.6.25 +# Sat May 3 00:38:11 2008 # CONFIG_MIPS=y # # Machine selection # -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set +# CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set +# CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set # CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set # CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MIPS_XXS1500 is not set +# CONFIG_MARKEINS is not set +# CONFIG_MACH_VR41XX is not set # CONFIG_PNX8550_JBS is not set # CONFIG_PNX8550_STB810 is not set -# CONFIG_MACH_VR41XX is not set +# CONFIG_PMC_MSP is not set # CONFIG_PMC_YOSEMITE is not set -# CONFIG_MARKEINS is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -CONFIG_SIBYTE_SWARM=y -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_LITTLESUR is not set # CONFIG_SIBYTE_CRHINE is not set +# CONFIG_SIBYTE_CARMEL is not set # CONFIG_SIBYTE_CRHONE is not set +# CONFIG_SIBYTE_RHONE is not set +CONFIG_SIBYTE_SWARM=y +# CONFIG_SIBYTE_LITTLESUR is not set +# CONFIG_SIBYTE_SENTOSA is not set +# CONFIG_SIBYTE_BIGSUR is not set # CONFIG_SNI_RM is not set # CONFIG_TOSHIBA_JMR3927 is not set # CONFIG_TOSHIBA_RBTX4927 is not set # CONFIG_TOSHIBA_RBTX4938 is not set +# CONFIG_WR_PPMC is not set CONFIG_SIBYTE_SB1250=y CONFIG_SIBYTE_SB1xxx_SOC=y -CONFIG_CPU_SB1_PASS_1=y +# CONFIG_CPU_SB1_PASS_1 is not set # CONFIG_CPU_SB1_PASS_2_1250 is not set -# CONFIG_CPU_SB1_PASS_2_2 is not set +CONFIG_CPU_SB1_PASS_2_2=y # CONFIG_CPU_SB1_PASS_4 is not set # CONFIG_CPU_SB1_PASS_2_112x is not set # CONFIG_CPU_SB1_PASS_3 is not set CONFIG_SIBYTE_HAS_LDT=y +CONFIG_SIBYTE_ENABLE_LDT_IF_PCI=y # CONFIG_SIMULATION is not set # CONFIG_SB1_CEX_ALWAYS_FATAL is not set # CONFIG_SB1_CERR_STALL is not set @@ -69,20 +60,32 @@ CONFIG_SIBYTE_CFE=y # CONFIG_SIBYTE_CFE_CONSOLE is not set # CONFIG_SIBYTE_BUS_WATCHER is not set # CONFIG_SIBYTE_TBPROF is not set +CONFIG_SIBYTE_HAS_ZBUS_PROFILING=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y # CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_CEVT_SB1250=y +CONFIG_CSRC_SB1250=y +CONFIG_CFE=y CONFIG_DMA_COHERENT=y +CONFIG_EARLY_PRINTK=y +CONFIG_SYS_HAS_EARLY_PRINTK=y +# CONFIG_HOTPLUG_CPU is not set +# CONFIG_NO_IOPORT is not set CONFIG_CPU_BIG_ENDIAN=y # CONFIG_CPU_LITTLE_ENDIAN is not set CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y +CONFIG_IRQ_CPU=y CONFIG_SWAP_IO_SPACE=y CONFIG_BOOT_ELF32=y CONFIG_MIPS_L1_CACHE_SHIFT=5 @@ -90,6 +93,7 @@ CONFIG_MIPS_L1_CACHE_SHIFT=5 # # CPU selection # +# CONFIG_CPU_LOONGSON2 is not set # CONFIG_CPU_MIPS32_R1 is not set # CONFIG_CPU_MIPS32_R2 is not set # CONFIG_CPU_MIPS64_R1 is not set @@ -130,8 +134,7 @@ CONFIG_CPU_HAS_PREFETCH=y CONFIG_MIPS_MT_DISABLED=y # CONFIG_MIPS_MT_SMP is not set # CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -CONFIG_SB1_PASS_1_WORKAROUNDS=y +CONFIG_SB1_PASS_2_WORKAROUNDS=y CONFIG_CPU_HAS_LLSC=y CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y @@ -140,6 +143,7 @@ CONFIG_IRQ_PER_CPU=y CONFIG_CPU_SUPPORTS_HIGHMEM=y CONFIG_SYS_SUPPORTS_HIGHMEM=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -147,13 +151,19 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_RESOURCES_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y CONFIG_SMP=y CONFIG_SYS_SUPPORTS_SMP=y CONFIG_NR_CPUS_DEFAULT_2=y CONFIG_NR_CPUS=2 +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -166,38 +176,49 @@ CONFIG_HZ=1000 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set -CONFIG_PREEMPT_BKL=y # CONFIG_KEXEC is not set +CONFIG_SECCOMP=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_LOCK_KERNEL=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y CONFIG_SWAP=y CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=15 CONFIG_CGROUPS=y +# CONFIG_CGROUP_DEBUG is not set +# CONFIG_CGROUP_NS is not set CONFIG_CPUSETS=y -CONFIG_SYSFS_DEPRECATED=y +CONFIG_GROUP_SCHED=y +CONFIG_FAIR_GROUP_SCHED=y +# CONFIG_RT_GROUP_SCHED is not set +CONFIG_USER_SCHED=y +# CONFIG_CGROUP_SCHED is not set +CONFIG_CGROUP_CPUACCT=y +# CONFIG_RESOURCE_COUNTERS is not set +# CONFIG_SYSFS_DEPRECATED_V2 is not set +# CONFIG_PROC_PID_CPUSET is not set CONFIG_RELAY=y +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_IPC_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y CONFIG_INITRAMFS_SOURCE="" # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -209,20 +230,29 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_COMPAT_BRK is not set CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_ANON_INODES=y CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y CONFIG_SHMEM=y -CONFIG_SLAB=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set @@ -230,12 +260,10 @@ CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y CONFIG_KMOD=y CONFIG_STOP_MACHINE=y - -# -# Block layer -# CONFIG_BLOCK=y # CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_BLK_DEV_BSG=y +CONFIG_BLOCK_COMPAT=y # # IO Schedulers @@ -249,22 +277,19 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCI_LEGACY is not set CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# +CONFIG_ZONE_DMA32=y # CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # CONFIG_HOTPLUG_PCI is not set # @@ -272,7 +297,6 @@ CONFIG_MMU=y # CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set -# CONFIG_BUILD_ELF64 is not set CONFIG_MIPS32_COMPAT=y CONFIG_COMPAT=y CONFIG_SYSVIPC_COMPAT=y @@ -286,7 +310,6 @@ CONFIG_BINFMT_ELF32=y CONFIG_PM=y # CONFIG_PM_LEGACY is not set # CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set # # Networking @@ -296,7 +319,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -304,6 +326,7 @@ CONFIG_XFRM=y CONFIG_XFRM_USER=m # CONFIG_XFRM_SUB_POLICY is not set CONFIG_XFRM_MIGRATE=y +# CONFIG_XFRM_STATISTICS is not set CONFIG_NET_KEY=y CONFIG_NET_KEY_MIGRATE=y CONFIG_INET=y @@ -326,6 +349,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=m CONFIG_INET_XFRM_MODE_TUNNEL=m CONFIG_INET_XFRM_MODE_BEET=m +CONFIG_INET_LRO=m CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -333,24 +357,15 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" CONFIG_TCP_MD5SIG=y # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# +CONFIG_IP_SCTP=m +# CONFIG_SCTP_DBG_MSG is not set +# CONFIG_SCTP_DBG_OBJCNT is not set +# CONFIG_SCTP_HMAC_NONE is not set +# CONFIG_SCTP_HMAC_SHA1 is not set +CONFIG_SCTP_HMAC_MD5=y # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -363,26 +378,52 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set +CONFIG_NET_SCH_FIFO=y # # Network testing # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +CONFIG_CFG80211=m +CONFIG_NL80211=y +CONFIG_WIRELESS_EXT=y +CONFIG_MAC80211=m + +# +# Rate control algorithm selection +# +CONFIG_MAC80211_RC_DEFAULT_PID=y +# CONFIG_MAC80211_RC_DEFAULT_NONE is not set + +# +# Selecting 'y' for an algorithm will +# + +# +# build the algorithm into mac80211. +# +CONFIG_MAC80211_RC_DEFAULT="pid" +CONFIG_MAC80211_RC_PID=y +# CONFIG_MAC80211_MESH is not set +# CONFIG_MAC80211_DEBUG_PACKET_ALIGNMENT is not set +# CONFIG_MAC80211_DEBUG is not set CONFIG_IEEE80211=m # CONFIG_IEEE80211_DEBUG is not set CONFIG_IEEE80211_CRYPT_WEP=m CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_SOFTMAC=m -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +CONFIG_IEEE80211_CRYPT_TKIP=m +CONFIG_RFKILL=m +# CONFIG_NET_9P is not set # # Device Drivers @@ -391,34 +432,15 @@ CONFIG_WIRELESS_EXT=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m # CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# CONFIG_CONNECTOR=m - -# -# Memory Technology Devices (MTD) -# # CONFIG_MTD is not set - -# -# Parallel port support -# # CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set @@ -427,49 +449,77 @@ CONFIG_CONNECTOR=m # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=9220 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y +# CONFIG_BLK_DEV_XIP is not set CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set CONFIG_ATA_OVER_ETH=m - -# -# Misc devices -# +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_SGI_IOC4=m # CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y CONFIG_IDE=y CONFIG_IDE_MAX_HWIFS=4 CONFIG_BLK_DEV_IDE=y # -# Please see Documentation/ide.txt for help/info on IDE drives +# Please see Documentation/ide/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_BLK_DEV_IDEDISK=y # CONFIG_IDEDISK_MULTI_MODE is not set CONFIG_BLK_DEV_IDECD=y +CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=y CONFIG_BLK_DEV_IDEFLOPPY=y # CONFIG_IDE_TASK_IOCTL is not set +CONFIG_IDE_PROC_FS=y # # IDE chipset support/bugfixes # -CONFIG_IDE_GENERIC=y -# CONFIG_BLK_DEV_IDEPCI is not set +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_PLATFORM is not set + +# +# PCI IDE chipsets support +# +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +# CONFIG_BLK_DEV_JMICRON is not set +# CONFIG_BLK_DEV_SC1200 is not set +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8213 is not set +# CONFIG_BLK_DEV_IT821X is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_BLK_DEV_TC86C001 is not set CONFIG_BLK_DEV_IDE_SWARM=y -# CONFIG_IDE_ARM is not set # CONFIG_BLK_DEV_IDEDMA is not set -# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD_ONLY is not set # CONFIG_BLK_DEV_HD is not set # @@ -477,89 +527,68 @@ CONFIG_BLK_DEV_IDE_SWARM=y # CONFIG_RAID_ATTRS=m # CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set # CONFIG_SCSI_NETLINK is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# # CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # # IEEE 1394 (FireWire) support # +# CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set - -# -# I2O device support -# # CONFIG_I2O is not set - -# -# Network device support -# CONFIG_NETDEVICES=y +CONFIG_NETDEVICES_MULTIQUEUE=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +CONFIG_MACVLAN=m # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# ARCnet devices -# +# CONFIG_VETH is not set # CONFIG_ARCNET is not set - -# -# PHY device support -# -CONFIG_PHYLIB=m +CONFIG_PHYLIB=y # # MII PHY device drivers # -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_SMSC_PHY=m -# CONFIG_BROADCOM_PHY is not set +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +CONFIG_BROADCOM_PHY=y +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set # CONFIG_FIXED_PHY is not set - -# -# Ethernet (10 or 100Mbit) -# +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y +# CONFIG_AX88796 is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set # CONFIG_NET_VENDOR_3COM is not set # CONFIG_DM9000 is not set - -# -# Tulip family network device support -# # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set # CONFIG_NET_PCI is not set - -# -# Ethernet (1000 Mbit) -# +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -568,53 +597,70 @@ CONFIG_SB1250_MAC=y # CONFIG_SIS190 is not set # CONFIG_SKGE is not set # CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_QLA3XXX=m +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# +CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_BNX2X is not set # CONFIG_TR is not set # -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +CONFIG_WLAN_80211=y +# CONFIG_IPW2100 is not set +# CONFIG_IPW2200 is not set +# CONFIG_LIBERTAS is not set +# CONFIG_HERMES is not set +# CONFIG_ATMEL is not set +# CONFIG_PRISM54 is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_NET_RNDIS_WLAN is not set +# CONFIG_RTL8180 is not set +# CONFIG_RTL8187 is not set +# CONFIG_ADM8211 is not set +# CONFIG_P54_COMMON is not set +# CONFIG_ATH5K is not set +# CONFIG_IWLCORE is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_IWL4965 is not set +# CONFIG_IWL3945 is not set +# CONFIG_HOSTAP is not set +# CONFIG_B43 is not set +# CONFIG_B43LEGACY is not set +# CONFIG_ZD1211RW is not set +# CONFIG_RT2X00 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -637,24 +683,8 @@ CONFIG_SERIO_RAW=m # Character devices # # CONFIG_VT is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=m -# CONFIG_ISI is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_SYNCLINK_GT is not set -# CONFIG_N_HDLC is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set -CONFIG_SERIAL_SB1250_DUART=y -CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -664,37 +694,22 @@ CONFIG_SERIAL_SB1250_DUART_CONSOLE=y # # Non-8250 serial port support # +CONFIG_SERIAL_SB1250_DUART=y +CONFIG_SERIAL_SB1250_DUART_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set -# CONFIG_DRM is not set # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set - -# -# I2C support -# +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -702,109 +717,139 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set # -# Dallas's 1-wire bus +# Sonics Silicon Backplane # -# CONFIG_W1 is not set +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # -# Hardware Monitoring support +# Multifunction device drivers # -# CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Sound +# Display device support # -# CONFIG_SOUND is not set +# CONFIG_DISPLAY_SUPPORT is not set # -# USB support +# Sound # +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y -# CONFIG_USB is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # -# USB Gadget Support +# Miscellaneous USB options # -# CONFIG_USB_GADGET is not set +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_OTG is not set # -# MMC/SD Card support +# USB Host Controller Drivers # -# CONFIG_MMC is not set +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set # -# LED devices +# USB Device Class drivers # -# CONFIG_NEW_LEDS is not set +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set # -# LED drivers +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' # # -# LED Triggers +# may also be needed; see USB_STORAGE Help for more information # +# CONFIG_USB_LIBUSUAL is not set # -# InfiniBand support +# USB Imaging devices # -# CONFIG_INFINIBAND is not set +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# USB port drivers # +# CONFIG_USB_SERIAL is not set # -# Real Time Clock +# USB Miscellaneous drivers # +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set # -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization +# Userspace I/O # +# CONFIG_UIO is not set # # File systems @@ -823,15 +868,14 @@ CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set # CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set CONFIG_FUSE_FS=m +CONFIG_GENERIC_ACL=y # # CD-ROM/DVD Filesystems @@ -853,9 +897,9 @@ CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y CONFIG_CONFIGFS_FS=m # @@ -871,14 +915,13 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set @@ -890,6 +933,7 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -897,45 +941,29 @@ CONFIG_SUNRPC=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set # CONFIG_DLM_DEBUG is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=15 -CONFIG_CROSSCOMPILE=y +# CONFIG_SAMPLES is not set CONFIG_CMDLINE="" CONFIG_SYS_SUPPORTS_KGDB=y # CONFIG_SB1XXX_CORELIS is not set @@ -946,13 +974,12 @@ CONFIG_SYS_SUPPORTS_KGDB=y CONFIG_KEYS=y CONFIG_KEYS_DEBUG_PROC_KEYS=y # CONFIG_SECURITY is not set - -# -# Cryptographic options -# +# CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_AEAD=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_SEQIV=m CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_HMAC=y @@ -970,6 +997,11 @@ CONFIG_CRYPTO_ECB=m CONFIG_CRYPTO_CBC=m CONFIG_CRYPTO_PCBC=m CONFIG_CRYPTO_LRW=m +CONFIG_CRYPTO_XTS=m +CONFIG_CRYPTO_CTR=m +CONFIG_CRYPTO_GCM=m +CONFIG_CRYPTO_CCM=m +CONFIG_CRYPTO_CRYPTD=m CONFIG_CRYPTO_DES=m CONFIG_CRYPTO_FCRYPT=m CONFIG_CRYPTO_BLOWFISH=m @@ -983,15 +1015,16 @@ CONFIG_CRYPTO_TEA=m CONFIG_CRYPTO_ARC4=m CONFIG_CRYPTO_KHAZAD=m CONFIG_CRYPTO_ANUBIS=m +CONFIG_CRYPTO_SEED=m +CONFIG_CRYPTO_SALSA20=m CONFIG_CRYPTO_DEFLATE=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_CRC32C=m CONFIG_CRYPTO_CAMELLIA=m # CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# +CONFIG_CRYPTO_AUTHENC=m +CONFIG_CRYPTO_LZO=m +# CONFIG_CRYPTO_HW is not set # # Library routines @@ -999,10 +1032,15 @@ CONFIG_CRYPTO_CAMELLIA=m CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m +# CONFIG_CRC_ITU_T is not set CONFIG_CRC32=y +# CONFIG_CRC7 is not set CONFIG_LIBCRC32C=m CONFIG_ZLIB_INFLATE=m CONFIG_ZLIB_DEFLATE=m +CONFIG_LZO_COMPRESS=m +CONFIG_LZO_DECOMPRESS=m CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y -- cgit v0.10.2 From a9ad02bdbb0193203a477bbd0e833adf9fb29ac4 Mon Sep 17 00:00:00 2001 From: Zenon Fortuna Date: Fri, 16 May 2008 17:29:48 -0700 Subject: [MIPS] Export smp_call_function and smp_call_function_single. Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/smp.c b/arch/mips/kernel/smp.c index 63370cd..cdf87a9 100644 --- a/arch/mips/kernel/smp.c +++ b/arch/mips/kernel/smp.c @@ -216,6 +216,7 @@ int smp_call_function(void (*func) (void *info), void *info, int retry, { return smp_call_function_mask(cpu_online_map, func, info, retry, wait); } +EXPORT_SYMBOL(smp_call_function); void smp_call_function_interrupt(void) { @@ -271,6 +272,7 @@ int smp_call_function_single(int cpu, void (*func) (void *info), void *info, put_cpu(); return 0; } +EXPORT_SYMBOL(smp_call_function_single); static void stop_this_cpu(void *dummy) { -- cgit v0.10.2 From d6c3048cad3c9eb312c070e11fdbea56498255ed Mon Sep 17 00:00:00 2001 From: Chris Dearman Date: Fri, 16 May 2008 17:29:54 -0700 Subject: [MIPS] vpe_id is required for VSMP and SMTC builds Signed-off-by: Chris Dearman Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/cpu-info.h b/include/asm-mips/cpu-info.h index 0c5a358..2de73db 100644 --- a/include/asm-mips/cpu-info.h +++ b/include/asm-mips/cpu-info.h @@ -56,7 +56,7 @@ struct cpuinfo_mips { struct cache_desc tcache; /* Tertiary/split secondary cache */ int srsets; /* Shadow register sets */ int core; /* physical core number */ -#if defined(CONFIG_MIPS_MT_SMTC) +#if defined(CONFIG_MIPS_MT_SMP) || defined(CONFIG_MIPS_MT_SMTC) /* * In the MIPS MT "SMTC" model, each TC is considered * to be a "CPU" for the purposes of scheduling, but @@ -64,7 +64,7 @@ struct cpuinfo_mips { * to all TCs within the same VPE. */ int vpe_id; /* Virtual Processor number */ -#endif /* CONFIG_MIPS_MT */ +#endif #ifdef CONFIG_MIPS_MT_SMTC int tc_id; /* Thread Context number */ #endif -- cgit v0.10.2 From 0c3bd83b0974238a5808d342663c6407512564d0 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sat, 14 Jun 2008 02:32:42 +0100 Subject: [MIPS] Lasat: bring back from the dead After the common MIPS CPU interrupt controller (for irq0-7) was introduced the Lasat boards didn't get their interrupts right, so nothing worked. The old routines need to be offset by the new 8 hardware interrupts common to all MIPS CPU's. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle diff --git a/arch/mips/lasat/interrupt.c b/arch/mips/lasat/interrupt.c index cfeab66..a56c150 100644 --- a/arch/mips/lasat/interrupt.c +++ b/arch/mips/lasat/interrupt.c @@ -34,11 +34,13 @@ static volatile int lasat_int_mask_shift; void disable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask &= ~(1 << irq_nr) << lasat_int_mask_shift; } void enable_lasat_irq(unsigned int irq_nr) { + irq_nr -= LASAT_IRQ_BASE; *lasat_int_mask |= (1 << irq_nr) << lasat_int_mask_shift; } diff --git a/include/asm-mips/lasat/serial.h b/include/asm-mips/lasat/serial.h index bafe68b..1c37d70 100644 --- a/include/asm-mips/lasat/serial.h +++ b/include/asm-mips/lasat/serial.h @@ -4,10 +4,10 @@ #define LASAT_BASE_BAUD_100 (7372800 / 16) #define LASAT_UART_REGS_BASE_100 0x1c8b0000 #define LASAT_UART_REGS_SHIFT_100 2 -#define LASATINT_UART_100 8 +#define LASATINT_UART_100 16 /* * LASAT 200 boards serial configuration */ #define LASAT_BASE_BAUD_200 (100000000 / 16 / 12) #define LASAT_UART_REGS_BASE_200 (Vrc5074_PHYS_BASE + 0x0300) #define LASAT_UART_REGS_SHIFT_200 3 -#define LASATINT_UART_200 13 +#define LASATINT_UART_200 21 -- cgit v0.10.2 From c9c5023d83df5dc7d58830a63fd0e082120f00e3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 14 Jun 2008 22:22:08 +0100 Subject: [MIPS] Fix buggy use of kmap_coherent. Assuming the call of kmap_coherent in local_r4k_flush_cache_page doesn't need fixing this was skipped in fcae549295bcae801ac48fc1c2030ab8cc487020. Turns out it needed the same change after all. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c index c41ea22..2709675 100644 --- a/arch/mips/mm/c-r4k.c +++ b/arch/mips/mm/c-r4k.c @@ -446,6 +446,7 @@ static inline void local_r4k_flush_cache_page(void *args) struct page *page = pfn_to_page(fcp_args->pfn); int exec = vma->vm_flags & VM_EXEC; struct mm_struct *mm = vma->vm_mm; + int map_coherent = 0; pgd_t *pgdp; pud_t *pudp; pmd_t *pmdp; @@ -479,7 +480,9 @@ static inline void local_r4k_flush_cache_page(void *args) * Use kmap_coherent or kmap_atomic to do flushes for * another ASID than the current one. */ - if (cpu_has_dc_aliases) + map_coherent = (cpu_has_dc_aliases && + page_mapped(page) && !Page_dcache_dirty(page)); + if (map_coherent) vaddr = kmap_coherent(page, addr); else vaddr = kmap_atomic(page, KM_USER0); @@ -502,7 +505,7 @@ static inline void local_r4k_flush_cache_page(void *args) } if (vaddr) { - if (cpu_has_dc_aliases) + if (map_coherent) kunmap_coherent(); else kunmap_atomic(vaddr, KM_USER0); -- cgit v0.10.2 From 1f34f2e4262bae8a1aa6d8fd6306b07074d33718 Mon Sep 17 00:00:00 2001 From: Thomas Horsten Date: Sun, 15 Jun 2008 02:17:11 +0100 Subject: [MIPS] Lasat: sysctl fixup LASAT's sysctl interface was broken, it failed a check during boot because a single entry had a sysctl number and the rest were unnumbered. When I fixed it I noticed that the whole sysctl file needed a spring clean, it was using mutexes where it wasn't needed (it's only needed to protect during writes to the EEPROM), so I moved that stuff out and generally cleaned the whole thing up. So now, LASAT's sysctl/proc interface is working again. Signed-off-by: Thomas Horsten Signed-off-by: Ralf Baechle diff --git a/arch/mips/lasat/lasat_board.c b/arch/mips/lasat/lasat_board.c index ec2f658..31e328b 100644 --- a/arch/mips/lasat/lasat_board.c +++ b/arch/mips/lasat/lasat_board.c @@ -23,18 +23,19 @@ #include #include #include +#include #include #include #include "at93c.h" /* New model description table */ #include "lasat_models.h" +static DEFINE_MUTEX(lasat_eeprom_mutex); + #define EEPROM_CRC(data, len) (~crc32(~0, data, len)) struct lasat_info lasat_board_info; -void update_bcastaddr(void); - int EEPROMRead(unsigned int pos, unsigned char *data, int len) { int i; @@ -258,10 +259,6 @@ int lasat_init_board_info(void) sprintf(lasat_board_info.li_typestr, "%d", 10 * c); } -#if defined(CONFIG_INET) && defined(CONFIG_SYSCTL) - update_bcastaddr(); -#endif - return 0; } @@ -269,6 +266,8 @@ void lasat_write_eeprom_info(void) { unsigned long crc; + mutex_lock(&lasat_eeprom_mutex); + /* Generate the CRC */ crc = EEPROM_CRC((unsigned char *)(&lasat_board_info.li_eeprom_info), sizeof(struct lasat_eeprom_struct) - 4); @@ -277,4 +276,6 @@ void lasat_write_eeprom_info(void) /* Write the EEPROM info */ EEPROMWrite(0, (unsigned char *)&lasat_board_info.li_eeprom_info, sizeof(struct lasat_eeprom_struct)); + + mutex_unlock(&lasat_eeprom_mutex); } diff --git a/arch/mips/lasat/sysctl.c b/arch/mips/lasat/sysctl.c index 389336c..866881e 100644 --- a/arch/mips/lasat/sysctl.c +++ b/arch/mips/lasat/sysctl.c @@ -29,15 +29,13 @@ #include #include #include -#include #include #include -#include "sysctl.h" +#ifdef CONFIG_DS1603 #include "ds1603.h" - -static DEFINE_MUTEX(lasat_info_mutex); +#endif /* Strategy function to write EEPROM after changing string entry */ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, @@ -46,18 +44,15 @@ int sysctl_lasatstring(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_string(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } @@ -67,14 +62,11 @@ int proc_dolasatstring(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dostring(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } @@ -85,28 +77,24 @@ int proc_dolasatint(ctl_table *table, int write, struct file *filp, { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if ((!write) || r) return r; - } + lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); return 0; } +#ifdef CONFIG_DS1603 static int rtctmp; -#ifdef CONFIG_DS1603 /* proc function to read/write RealTime Clock */ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); if (!write) { rtctmp = read_persistent_clock(); /* check for time < 0 and set to 0 */ @@ -114,12 +102,11 @@ int proc_dolasatrtc(ctl_table *table, int write, struct file *filp, rtctmp = 0; } r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r) return r; - } - rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); + + if (write) + rtc_mips_set_mmss(rtctmp); return 0; } @@ -132,17 +119,14 @@ int sysctl_lasat_intvec(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } + if (newval && newlen) lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 1; + return 0; } #ifdef CONFIG_DS1603 @@ -153,50 +137,27 @@ int sysctl_lasat_rtc(ctl_table *table, int *name, int nlen, { int r; - mutex_lock(&lasat_info_mutex); rtctmp = read_persistent_clock(); if (rtctmp < 0) rtctmp = 0; r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } if (newval && newlen) rtc_mips_set_mmss(rtctmp); - mutex_unlock(&lasat_info_mutex); - return 1; + return r; } #endif #ifdef CONFIG_INET -static char lasat_bcastaddr[16]; - -void update_bcastaddr(void) -{ - unsigned int ip; - - ip = (lasat_board_info.li_eeprom_info.ipaddr & - lasat_board_info.li_eeprom_info.netmask) | - ~lasat_board_info.li_eeprom_info.netmask; - - sprintf(lasat_bcastaddr, "%d.%d.%d.%d", - (ip) & 0xff, - (ip >> 8) & 0xff, - (ip >> 16) & 0xff, - (ip >> 24) & 0xff); -} - -static char proc_lasat_ipbuf[32]; - -/* Parsing of IP address */ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { unsigned int ip; char *p, c; int len; + char ipbuf[32]; if (!table->data || !table->maxlen || !*lenp || (*ppos && !write)) { @@ -204,117 +165,88 @@ int proc_lasat_ip(ctl_table *table, int write, struct file *filp, return 0; } - mutex_lock(&lasat_info_mutex); if (write) { len = 0; p = buffer; while (len < *lenp) { - if (get_user(c, p++)) { - mutex_unlock(&lasat_info_mutex); + if (get_user(c, p++)) return -EFAULT; - } if (c == 0 || c == '\n') break; len++; } - if (len >= sizeof(proc_lasat_ipbuf)-1) - len = sizeof(proc_lasat_ipbuf) - 1; - if (copy_from_user(proc_lasat_ipbuf, buffer, len)) { - mutex_unlock(&lasat_info_mutex); + if (len >= sizeof(ipbuf)-1) + len = sizeof(ipbuf) - 1; + if (copy_from_user(ipbuf, buffer, len)) return -EFAULT; - } - proc_lasat_ipbuf[len] = 0; + ipbuf[len] = 0; *ppos += *lenp; /* Now see if we can convert it to a valid IP */ - ip = in_aton(proc_lasat_ipbuf); + ip = in_aton(ipbuf); *(unsigned int *)(table->data) = ip; lasat_write_eeprom_info(); } else { ip = *(unsigned int *)(table->data); - sprintf(proc_lasat_ipbuf, "%d.%d.%d.%d", + sprintf(ipbuf, "%d.%d.%d.%d", (ip) & 0xff, (ip >> 8) & 0xff, (ip >> 16) & 0xff, (ip >> 24) & 0xff); - len = strlen(proc_lasat_ipbuf); + len = strlen(ipbuf); if (len > *lenp) len = *lenp; if (len) - if (copy_to_user(buffer, proc_lasat_ipbuf, len)) { - mutex_unlock(&lasat_info_mutex); + if (copy_to_user(buffer, ipbuf, len)) return -EFAULT; - } if (len < *lenp) { - if (put_user('\n', ((char *) buffer) + len)) { - mutex_unlock(&lasat_info_mutex); + if (put_user('\n', ((char *) buffer) + len)) return -EFAULT; - } len++; } *lenp = len; *ppos += len; } - update_bcastaddr(); - mutex_unlock(&lasat_info_mutex); return 0; } -#endif /* defined(CONFIG_INET) */ +#endif -static int sysctl_lasat_eeprom_value(ctl_table *table, int *name, int nlen, +static int sysctl_lasat_prid(ctl_table *table, int *name, int nlen, void *oldval, size_t *oldlenp, void *newval, size_t newlen) { int r; - mutex_lock(&lasat_info_mutex); r = sysctl_intvec(table, name, nlen, oldval, oldlenp, newval, newlen); - if (r < 0) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; - } - if (newval && newlen) { - if (name && *name == LASAT_PRID) - lasat_board_info.li_eeprom_info.prid = *(int *)newval; - + lasat_board_info.li_eeprom_info.prid = *(int *)newval; lasat_write_eeprom_info(); lasat_init_board_info(); } - mutex_unlock(&lasat_info_mutex); - return 0; } -int proc_lasat_eeprom_value(ctl_table *table, int write, struct file *filp, +int proc_lasat_prid(ctl_table *table, int write, struct file *filp, void *buffer, size_t *lenp, loff_t *ppos) { int r; - mutex_lock(&lasat_info_mutex); r = proc_dointvec(table, write, filp, buffer, lenp, ppos); - if ((!write) || r) { - mutex_unlock(&lasat_info_mutex); + if (r < 0) return r; + if (write) { + lasat_board_info.li_eeprom_info.prid = + lasat_board_info.li_prid; + lasat_write_eeprom_info(); + lasat_init_board_info(); } - if (filp && filp->f_path.dentry) { - if (!strcmp(filp->f_path.dentry->d_name.name, "prid")) - lasat_board_info.li_eeprom_info.prid = - lasat_board_info.li_prid; - if (!strcmp(filp->f_path.dentry->d_name.name, "debugaccess")) - lasat_board_info.li_eeprom_info.debugaccess = - lasat_board_info.li_debugaccess; - } - lasat_write_eeprom_info(); - mutex_unlock(&lasat_info_mutex); - return 0; } extern int lasat_boot_to_service; -#ifdef CONFIG_SYSCTL - static ctl_table lasat_table[] = { { .ctl_name = CTL_UNNUMBERED, @@ -349,8 +281,8 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_prid, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = &proc_lasat_eeprom_value, - .strategy = &sysctl_lasat_eeprom_value + .proc_handler = &proc_lasat_prid, + .strategy = &sysctl_lasat_prid }, #ifdef CONFIG_INET { @@ -363,7 +295,7 @@ static ctl_table lasat_table[] = { .strategy = &sysctl_lasat_intvec }, { - .ctl_name = LASAT_NETMASK, + .ctl_name = CTL_UNNUMBERED, .procname = "netmask", .data = &lasat_board_info.li_eeprom_info.netmask, .maxlen = sizeof(int), @@ -371,15 +303,6 @@ static ctl_table lasat_table[] = { .proc_handler = &proc_lasat_ip, .strategy = &sysctl_lasat_intvec }, - { - .ctl_name = CTL_UNNUMBERED, - .procname = "bcastaddr", - .data = &lasat_bcastaddr, - .maxlen = sizeof(lasat_bcastaddr), - .mode = 0600, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string - }, #endif { .ctl_name = CTL_UNNUMBERED, @@ -417,7 +340,7 @@ static ctl_table lasat_table[] = { .data = &lasat_board_info.li_namestr, .maxlen = sizeof(lasat_board_info.li_namestr), .mode = 0444, - .proc_handler = &proc_dostring, + .proc_handler = &proc_dostring, .strategy = &sysctl_string }, { @@ -448,9 +371,12 @@ static int __init lasat_register_sysctl(void) lasat_table_header = register_sysctl_table(lasat_root_table); + if (!lasat_table_header) { + printk(KERN_ERR "Unable to register LASAT sysctl\n"); + return -ENOMEM; + } return 0; } __initcall(lasat_register_sysctl); -#endif /* CONFIG_SYSCTL */ diff --git a/arch/mips/lasat/sysctl.h b/arch/mips/lasat/sysctl.h deleted file mode 100644 index 341b979..0000000 --- a/arch/mips/lasat/sysctl.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * LASAT sysctl values - */ - -#ifndef _LASAT_SYSCTL_H -#define _LASAT_SYSCTL_H - -/* /proc/sys/lasat */ -enum { - LASAT_CPU_HZ = 1, - LASAT_BUS_HZ, - LASAT_MODEL, - LASAT_PRID, - LASAT_IPADDR, - LASAT_NETMASK, - LASAT_BCAST, - LASAT_PASSWORD, - LASAT_SBOOT, - LASAT_RTC, - LASAT_NAMESTR, - LASAT_TYPESTR, -}; - -#endif /* _LASAT_SYSCTL_H */ -- cgit v0.10.2 From 938b2b14172bd098972df2a5157bfabf161c90e5 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Thu, 29 May 2008 22:05:07 +0200 Subject: [MIPS] Malta: Fix build errors for 64-bit kernels Fix 64-bit Malta by using CKSEG0ADDR and correct casts. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/mips-boards/generic/amon.c b/arch/mips/mips-boards/generic/amon.c index b7633fd..96236bf 100644 --- a/arch/mips/mips-boards/generic/amon.c +++ b/arch/mips/mips-boards/generic/amon.c @@ -28,7 +28,7 @@ int amon_cpu_avail(int cpu) { - struct cpulaunch *launch = (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + struct cpulaunch *launch = (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (cpu < 0 || cpu >= NCPULAUNCH) { pr_debug("avail: cpu%d is out of range\n", cpu); @@ -53,7 +53,7 @@ void amon_cpu_start(int cpu, unsigned long gp, unsigned long a0) { volatile struct cpulaunch *launch = - (struct cpulaunch *)KSEG0ADDR(CPULAUNCH); + (struct cpulaunch *)CKSEG0ADDR(CPULAUNCH); if (!amon_cpu_avail(cpu)) return; diff --git a/include/asm-mips/gic.h b/include/asm-mips/gic.h index 3a492f2..954807d 100644 --- a/include/asm-mips/gic.h +++ b/include/asm-mips/gic.h @@ -24,8 +24,8 @@ #define MSK(n) ((1 << (n)) - 1) #define REG32(addr) (*(volatile unsigned int *) (addr)) -#define REG(base, offs) REG32((unsigned int)(base) + offs##_##OFS) -#define REGP(base, phys) REG32((unsigned int)(base) + (phys)) +#define REG(base, offs) REG32((unsigned long)(base) + offs##_##OFS) +#define REGP(base, phys) REG32((unsigned long)(base) + (phys)) /* Accessors */ #define GIC_REG(segment, offset) \ -- cgit v0.10.2 From b8157180ccd8bb3752f510c6c434b86394636093 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 16 Jun 2008 00:23:39 +0100 Subject: [MIPS] Malta: Always compile MTD platform device registration code. Signed-off-by: Ralf Baechle diff --git a/arch/mips/mips-boards/malta/Makefile b/arch/mips/mips-boards/malta/Makefile index 8dc6e2a..db4ad65 100644 --- a/arch/mips/mips-boards/malta/Makefile +++ b/arch/mips/mips-boards/malta/Makefile @@ -19,9 +19,8 @@ # under Linux. # -obj-y := malta_int.o malta_platform.o malta_setup.o +obj-y := malta_int.o malta_mtd.o malta_platform.o malta_setup.o -obj-$(CONFIG_MTD) += malta_mtd.o # FIXME FIXME FIXME obj-$(CONFIG_MIPS_MT_SMTC) += malta_smtc.o -- cgit v0.10.2 From f1304b358a6c952e4cd1f92c8a6f183b1026c103 Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:51:08 +0900 Subject: [MIPS] Vr41xx: Initialize PCI io_map_base Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle diff --git a/arch/mips/pci/pci-vr41xx.c b/arch/mips/pci/pci-vr41xx.c index 33c4f68..d1e049b 100644 --- a/arch/mips/pci/pci-vr41xx.c +++ b/arch/mips/pci/pci-vr41xx.c @@ -3,7 +3,7 @@ * * Copyright (C) 2001-2003 MontaVista Software Inc. * Author: Yoichi Yuasa - * Copyright (C) 2004-2005 Yoichi Yuasa + * Copyright (C) 2004-2008 Yoichi Yuasa * Copyright (C) 2004 by Ralf Baechle (ralf@linux-mips.org) * * This program is free software; you can redistribute it and/or modify @@ -300,6 +300,18 @@ static int __init vr41xx_pciu_init(void) ioport_resource.end = IO_PORT_RESOURCE_END; } + if (setup->master_io) { + void __iomem *io_map_base; + struct resource *res = vr41xx_pci_controller.io_resource; + master = setup->master_io; + io_map_base = ioremap(master->bus_base_address, + res->end - res->start + 1); + if (!io_map_base) + return -EBUSY; + + vr41xx_pci_controller.io_map_base = (unsigned long)io_map_base; + } + register_pci_controller(&vr41xx_pci_controller); return 0; -- cgit v0.10.2 From b185194ef0691c8068c7d764aa8f78899d05512a Mon Sep 17 00:00:00 2001 From: Yoichi Yuasa Date: Mon, 16 Jun 2008 22:54:16 +0900 Subject: [MIPS] TANBAC: Update defconfig These boards need cca setup on CMDLINE. Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig index af82e1a..8dd3ae3 100644 --- a/arch/mips/configs/tb0219_defconfig +++ b/arch/mips/configs/tb0219_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Wed Aug 8 16:11:47 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:54:51 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +308,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -285,15 +316,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -306,10 +332,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -317,6 +339,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -339,6 +362,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -360,10 +384,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -375,10 +400,6 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set # @@ -394,6 +415,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set CONFIG_PHYLIB=m @@ -409,7 +431,8 @@ CONFIG_VITESSE_PHY=m CONFIG_SMSC_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -420,6 +443,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -427,7 +454,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -439,6 +465,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -451,6 +478,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -472,6 +503,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -480,14 +512,12 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -506,7 +536,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -533,7 +562,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -552,52 +583,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set CONFIG_GPIO_TB0219=y -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -616,6 +657,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -624,15 +666,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -665,10 +710,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -694,17 +735,11 @@ CONFIG_USB_MON=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -729,9 +764,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -740,23 +776,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -771,20 +790,16 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -813,7 +828,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -828,24 +842,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=y CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -866,47 +877,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig index a95385b..2ba240e 100644 --- a/arch/mips/configs/tb0226_defconfig +++ b/arch/mips/configs/tb0226_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 11:16:55 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:53:54 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,23 +171,29 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +206,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +242,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +266,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -277,6 +307,7 @@ CONFIG_SYN_COOKIES=y # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -284,15 +315,10 @@ CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set # CONFIG_IP_SCTP is not set -# CONFIG_SCTP_HMAC_NONE is not set -# CONFIG_SCTP_HMAC_SHA1 is not set -# CONFIG_SCTP_HMAC_MD5 is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -305,10 +331,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -316,6 +338,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -338,6 +361,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y @@ -359,10 +383,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -402,18 +427,13 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_ISCSI_ATTRS is not set CONFIG_SCSI_SAS_ATTRS=m CONFIG_SCSI_SAS_LIBSAS=m +CONFIG_SCSI_SAS_HOST_SMP=y # CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set # CONFIG_ATA is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -428,6 +448,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -440,6 +461,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -447,7 +472,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set @@ -455,6 +479,7 @@ CONFIG_E100=y # CONFIG_NE2K_PCI is not set # CONFIG_8139CP is not set # CONFIG_8139TOO is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -470,6 +495,7 @@ CONFIG_E100=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -478,7 +504,6 @@ CONFIG_USB_CATC=m CONFIG_USB_KAWETH=m CONFIG_USB_PEGASUS=m CONFIG_USB_RTL8150=m -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -486,7 +511,6 @@ CONFIG_USB_RTL8150=m # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -505,7 +529,6 @@ CONFIG_INPUT=y # # CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -532,7 +555,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -551,52 +576,62 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # # CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set + +# +# Multimedia drivers +# # CONFIG_DAB is not set # # Graphics support # +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # # Display device support # # CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set # # Console display driver support @@ -615,6 +650,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=y # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -623,15 +659,18 @@ CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -657,13 +696,16 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -676,10 +718,6 @@ CONFIG_USB_STORAGE=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -705,17 +743,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y @@ -740,9 +772,10 @@ CONFIG_RTC_INTF_DEV=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set -# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set # CONFIG_RTC_DRV_M48T59 is not set # CONFIG_RTC_DRV_V3020 is not set @@ -751,23 +784,6 @@ CONFIG_RTC_INTF_DEV=y # on-CPU RTC drivers # CONFIG_RTC_DRV_VR41XX=y - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -782,14 +798,11 @@ CONFIG_EXT2_FS=y # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y # CONFIG_XFS_FS is not set -# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -818,7 +831,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -833,24 +845,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -# CONFIG_NFSD_TCP is not set CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -871,47 +880,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=32M console=ttyVR0,115200" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=32M console=ttyVR0,115200" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=m +# CONFIG_GENERIC_FIND_FIRST_BIT is not set # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig index 40d4a40a..a5d0f3c 100644 --- a/arch/mips/configs/tb0287_defconfig +++ b/arch/mips/configs/tb0287_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.23-rc2 -# Thu Aug 9 14:03:54 2007 +# Linux kernel version: 2.6.26-rc1 +# Mon May 12 11:55:55 2008 # CONFIG_MIPS=y @@ -10,9 +10,11 @@ CONFIG_MIPS=y # # CONFIG_MACH_ALCHEMY is not set # CONFIG_BASLER_EXCITE is not set +# CONFIG_BCM47XX is not set # CONFIG_MIPS_COBALT is not set # CONFIG_MACH_DECSTATION is not set # CONFIG_MACH_JAZZ is not set +# CONFIG_LASAT is not set # CONFIG_LEMOTE_FULONG is not set # CONFIG_MIPS_ATLAS is not set # CONFIG_MIPS_MALTA is not set @@ -26,6 +28,7 @@ CONFIG_MACH_VR41XX=y # CONFIG_PMC_YOSEMITE is not set # CONFIG_SGI_IP22 is not set # CONFIG_SGI_IP27 is not set +# CONFIG_SGI_IP28 is not set # CONFIG_SGI_IP32 is not set # CONFIG_SIBYTE_CRHINE is not set # CONFIG_SIBYTE_CARMEL is not set @@ -53,12 +56,17 @@ CONFIG_PCI_VR41XX=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_ARCH_SUPPORTS_OPROFILE=y CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_CEVT_R4K=y +CONFIG_CSRC_R4K=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y # CONFIG_HOTPLUG_CPU is not set @@ -113,6 +121,7 @@ CONFIG_CPU_HAS_SYNC=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_IRQ_PROBE=y CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -120,10 +129,16 @@ CONFIG_FLATMEM_MANUAL=y CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_RESOURCES_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set @@ -156,12 +171,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set -# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y @@ -173,6 +191,8 @@ CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y +# CONFIG_PCSPKR_PLATFORM is not set +CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y CONFIG_ANON_INODES=y @@ -185,10 +205,19 @@ CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y # CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y @@ -212,18 +241,17 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y # # Bus options (PCI, PCMCIA, EISA, ISA, TC) # CONFIG_HW_HAS_PCI=y CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y # CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PCI_LEGACY=y CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set @@ -237,6 +265,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # +CONFIG_ARCH_SUSPEND_POSSIBLE=y # CONFIG_PM is not set # @@ -278,6 +307,7 @@ CONFIG_INET_TUNNEL=m # CONFIG_INET_XFRM_MODE_TRANSPORT is not set # CONFIG_INET_XFRM_MODE_TUNNEL is not set # CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y CONFIG_TCP_CONG_ADVANCED=y @@ -302,8 +332,6 @@ CONFIG_DEFAULT_BIC=y CONFIG_DEFAULT_TCP_CONG="bic" # CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set CONFIG_NETWORK_SECMARK=y # CONFIG_NETFILTER is not set # CONFIG_IP_DCCP is not set @@ -320,10 +348,6 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# # CONFIG_NET_SCHED is not set # @@ -331,6 +355,7 @@ CONFIG_NETWORK_SECMARK=y # # CONFIG_NET_PKTGEN is not set # CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set @@ -353,6 +378,7 @@ CONFIG_FIB_RULES=y # # Generic Driver Options # +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=m @@ -374,10 +400,11 @@ CONFIG_BLK_DEV_NBD=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +CONFIG_BLK_DEV_XIP=y # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set # CONFIG_MISC_DEVICES is not set +CONFIG_HAVE_IDE=y # CONFIG_IDE is not set # @@ -416,10 +443,14 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_FC_ATTRS is not set # CONFIG_SCSI_ISCSI_ATTRS is not set # CONFIG_SCSI_SAS_LIBSAS is not set +# CONFIG_SCSI_SRP_ATTRS is not set # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_PMP=y # CONFIG_SATA_AHCI is not set +# CONFIG_SATA_SIL24 is not set +CONFIG_ATA_SFF=y # CONFIG_SATA_SVW is not set # CONFIG_ATA_PIIX is not set # CONFIG_SATA_MV is not set @@ -429,7 +460,6 @@ CONFIG_ATA=y # CONFIG_SATA_PROMISE is not set # CONFIG_SATA_SX4 is not set # CONFIG_SATA_SIL is not set -# CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set # CONFIG_SATA_VIA is not set @@ -458,7 +488,9 @@ CONFIG_ATA=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NINJA32 is not set # CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set # CONFIG_PATA_OPTI is not set # CONFIG_PATA_OPTIDMA is not set # CONFIG_PATA_PDC_OLD is not set @@ -472,15 +504,9 @@ CONFIG_PATA_SIL680=y # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set +# CONFIG_PATA_SCH is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# # CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set # # IEEE 1394 (FireWire) support @@ -520,6 +546,7 @@ CONFIG_NETDEVICES=y # CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set +# CONFIG_VETH is not set # CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y @@ -532,6 +559,10 @@ CONFIG_MII=y # CONFIG_DM9000 is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set @@ -539,7 +570,6 @@ CONFIG_NET_PCI=y # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set # CONFIG_TC35815 is not set -# CONFIG_DGRS is not set # CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set @@ -551,6 +581,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_8139TOO_TUNE_TWISTER is not set # CONFIG_8139TOO_8129 is not set # CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set # CONFIG_SUNDANCE is not set @@ -563,6 +594,10 @@ CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_E1000E_ENABLED is not set +# CONFIG_IP1000 is not set +# CONFIG_IGB is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -584,6 +619,7 @@ CONFIG_VIA_VELOCITY=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set # # USB Network Adapters @@ -592,7 +628,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set # CONFIG_USB_USBNET is not set # CONFIG_WAN is not set # CONFIG_FDDI is not set @@ -600,7 +635,6 @@ CONFIG_VIA_VELOCITY=y # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set @@ -622,7 +656,6 @@ CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set @@ -649,7 +682,9 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_DEVKMEM is not set # CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_NOZOMI is not set # # Serial drivers @@ -668,49 +703,53 @@ CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set -# CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set -# CONFIG_RTC is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_GPIO_TB0219 is not set -# CONFIG_DRM is not set CONFIG_GPIO_VR41XX=y # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set CONFIG_DEVPORT=y # CONFIG_I2C is not set - -# -# SPI support -# # CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set +# CONFIG_THERMAL is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set # # Multifunction device drivers # CONFIG_MFD_SM501=y +# CONFIG_HTC_PASIC3 is not set # # Multimedia devices # + +# +# Multimedia core support +# # CONFIG_VIDEO_DEV is not set # CONFIG_DVB_CORE is not set -# CONFIG_DAB is not set # -# Graphics support +# Multimedia drivers # -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_DAB is not set # -# Display device support +# Graphics support # -# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m CONFIG_FB=y @@ -719,9 +758,11 @@ CONFIG_FB=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set # CONFIG_FB_SYS_FILLRECT is not set # CONFIG_FB_SYS_COPYAREA is not set # CONFIG_FB_SYS_IMAGEBLIT is not set +# CONFIG_FB_FOREIGN_ENDIAN is not set # CONFIG_FB_SYS_FOPS is not set CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set @@ -757,7 +798,14 @@ CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_ARK is not set # CONFIG_FB_PM3 is not set CONFIG_FB_SM501=y +# CONFIG_FB_COBALT is not set # CONFIG_FB_VIRTUAL is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set # # Console display driver support @@ -787,6 +835,7 @@ CONFIG_FONT_8x16=y CONFIG_HID_SUPPORT=y CONFIG_HID=y # CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set # # USB Input Devices @@ -807,6 +856,7 @@ CONFIG_USB_ARCH_HAS_OHCI=y CONFIG_USB_ARCH_HAS_EHCI=y CONFIG_USB=m # CONFIG_USB_DEBUG is not set +# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set # # Miscellaneous USB options @@ -815,15 +865,18 @@ CONFIG_USB=m CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set # CONFIG_USB_OTG is not set +# CONFIG_USB_OTG_WHITELIST is not set +# CONFIG_USB_OTG_BLACKLIST_HUB is not set # # USB Host Controller Drivers # +# CONFIG_USB_C67X00_HCD is not set CONFIG_USB_EHCI_HCD=m -# CONFIG_USB_EHCI_SPLIT_ISO is not set # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_ISP116X_HCD is not set +# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set @@ -849,13 +902,16 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set # CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set # CONFIG_USB_STORAGE_JUMPSHOT is not set # CONFIG_USB_STORAGE_ALAUDA is not set +# CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set +# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set # @@ -868,10 +924,6 @@ CONFIG_USB_MON=y # # USB port drivers # - -# -# USB Serial Converter support -# # CONFIG_USB_SERIAL is not set # @@ -896,36 +948,14 @@ CONFIG_USB_MON=y # CONFIG_USB_LD is not set # CONFIG_USB_TRANCEVIBRATOR is not set # CONFIG_USB_IOWARRIOR is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set # CONFIG_INFINIBAND is not set +CONFIG_RTC_LIB=y # CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Userspace I/O -# # CONFIG_UIO is not set # @@ -940,25 +970,21 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4DEV_FS is not set CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y -# CONFIG_XFS_SECURITY is not set CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set +# CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -CONFIG_ROMFS_FS=m +CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y # CONFIG_QUOTA is not set CONFIG_QUOTACTL=y -CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=y # CONFIG_FUSE_FS is not set @@ -987,7 +1013,6 @@ CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y # CONFIG_CONFIGFS_FS is not set # @@ -1002,24 +1027,21 @@ CONFIG_RAMFS=y # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m # CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=m # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set - -# -# Network File Systems -# +CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V3_ACL is not set # CONFIG_NFSD_V4 is not set -CONFIG_NFSD_TCP=y CONFIG_ROOT_NFS=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y @@ -1040,47 +1062,38 @@ CONFIG_SUNRPC=y # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# # CONFIG_NLS is not set - -# -# Distributed Lock Manager -# # CONFIG_DLM is not set # -# Profiling support -# -# CONFIG_PROFILING is not set - -# # Kernel hacking # CONFIG_TRACE_IRQFLAGS_SUPPORT=y # CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set # CONFIG_DEBUG_FS is not set # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" +# CONFIG_SAMPLES is not set +CONFIG_CMDLINE="cca=3 mem=64M console=ttyVR0,115200 ip=any root=/dev/nfs" # # Security options # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_ITU_T is not set -- cgit v0.10.2 From dab8c6deaf1d654d09c3de8bd4c286d424df255a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Thu, 8 May 2008 23:06:17 +0400 Subject: [MIPS] Au1200: MMC resource size off by one Au12x0 MMC platform device strangely claims 0x41 bytes for its memory-mapped registers. Make it claim the whole 0x80000 instead according to the memory map given in the datasheets. Signed-off-by: Sergei Shtylyov Signed-off-by: Ralf Baechle diff --git a/arch/mips/au1000/common/platform.c b/arch/mips/au1000/common/platform.c index 8cae775..74d6d4a 100644 --- a/arch/mips/au1000/common/platform.c +++ b/arch/mips/au1000/common/platform.c @@ -165,12 +165,12 @@ static struct resource au1xxx_usb_gdt_resources[] = { static struct resource au1xxx_mmc_resources[] = { [0] = { .start = SD0_PHYS_ADDR, - .end = SD0_PHYS_ADDR + 0x40, + .end = SD0_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [1] = { .start = SD1_PHYS_ADDR, - .end = SD1_PHYS_ADDR + 0x40, + .end = SD1_PHYS_ADDR + 0x7ffff, .flags = IORESOURCE_MEM, }, [2] = { -- cgit v0.10.2 From 732a675a6303156d1a197dc780b0712bd4b49d46 Mon Sep 17 00:00:00 2001 From: Jack Steiner Date: Sat, 14 Jun 2008 07:57:25 -0500 Subject: [IA64] Fix CONFIG_IA64_SGI_UV build error Fix build error in CONFIG_IA64_SGI_UV config. (GENERIC builds are ok). Signed-off-by: Jack Steiner Signed-off-by: Tony Luck diff --git a/arch/ia64/Makefile b/arch/ia64/Makefile index 88f1a55..e67ee3f 100644 --- a/arch/ia64/Makefile +++ b/arch/ia64/Makefile @@ -57,6 +57,7 @@ core-$(CONFIG_IA64_GENERIC) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1) += arch/ia64/dig/ core-$(CONFIG_IA64_HP_ZX1_SWIOTLB) += arch/ia64/dig/ core-$(CONFIG_IA64_SGI_SN2) += arch/ia64/sn/ +core-$(CONFIG_IA64_SGI_UV) += arch/ia64/uv/ core-$(CONFIG_KVM) += arch/ia64/kvm/ drivers-$(CONFIG_PCI) += arch/ia64/pci/ diff --git a/arch/ia64/uv/kernel/setup.c b/arch/ia64/uv/kernel/setup.c index 9aa7432..cf5f28a 100644 --- a/arch/ia64/uv/kernel/setup.c +++ b/arch/ia64/uv/kernel/setup.c @@ -17,6 +17,9 @@ DEFINE_PER_CPU(struct uv_hub_info_s, __uv_hub_info); EXPORT_PER_CPU_SYMBOL_GPL(__uv_hub_info); +#ifdef CONFIG_IA64_SGI_UV +int sn_prom_type; +#endif struct redir_addr { unsigned long redirect; @@ -64,6 +67,15 @@ void __init uv_setup(char **cmdline_p) m_n_config.s.m_skt = 37; m_n_config.s.n_skt = 0; mmr_base = 0; +#if 0 + /* Need BIOS calls - TDB */ + if (!ia64_sn_is_fake_prom()) + sn_prom_type = 1; + else +#endif + sn_prom_type = 2; + printk(KERN_INFO "Running on medusa with %s PROM\n", + (sn_prom_type == 1) ? "real" : "fake"); } else { get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size); node_id.v = uv_read_local_mmr(UVH_NODE_ID); diff --git a/include/asm-ia64/sn/simulator.h b/include/asm-ia64/sn/simulator.h index c3fd3eb..c2611f6 100644 --- a/include/asm-ia64/sn/simulator.h +++ b/include/asm-ia64/sn/simulator.h @@ -8,7 +8,7 @@ #ifndef _ASM_IA64_SN_SIMULATOR_H #define _ASM_IA64_SN_SIMULATOR_H - +#if defined(CONFIG_IA64_GENERIC) || defined(CONFIG_IA64_SGI_SN2) || defined(CONFIG_IA64_SGI_UV) #define SNMAGIC 0xaeeeeeee8badbeefL #define IS_MEDUSA() ({long sn; asm("mov %0=cpuid[%1]" : "=r"(sn) : "r"(2)); sn == SNMAGIC;}) @@ -16,5 +16,10 @@ #define IS_RUNNING_ON_SIMULATOR() (sn_prom_type) #define IS_RUNNING_ON_FAKE_PROM() (sn_prom_type == 2) extern int sn_prom_type; /* 0=hardware, 1=medusa/realprom, 2=medusa/fakeprom */ +#else +#define IS_MEDUSA() 0 +#define SIMULATOR_SLEEP() +#define IS_RUNNING_ON_SIMULATOR() 0 +#endif #endif /* _ASM_IA64_SN_SIMULATOR_H */ -- cgit v0.10.2 From b052beb0432616aa4dac2b167e7809feae993991 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 16 Jun 2008 13:36:29 +0100 Subject: MN10300: Kill linux/a.out.h inclusions Kill linux/a.out.h inclusions in the MN10300 arch code. Signed-off-by: David Howells Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 3b0d579..9c623c8 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -20,7 +20,6 @@ #include #include #include -#include #include #include #include diff --git a/arch/mn10300/kernel/setup.c b/arch/mn10300/kernel/setup.c index 6b7ce26..017121c 100644 --- a/arch/mn10300/kernel/setup.c +++ b/arch/mn10300/kernel/setup.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include -- cgit v0.10.2 From 702773b16e83fcddc41e0019b8214d3c3cecedbe Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:11:54 +0100 Subject: Include in fs/exec.c only for Alpha. We only need it for the /sbin/loader hack for OSF/1 executables, and we don't want to include it otherwise. While we're at it, remove the redundant '&& CONFIG_ARCH_SUPPORTS_AOUT' in the ifdef around that code. It's already dependent on __alpha__, and CONFIG_ARCH_SUPPORTS_AOUT is hard-coded to 'y' there. Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/fs/exec.c b/fs/exec.c index 9448f1b..da94a6f 100644 --- a/fs/exec.c +++ b/fs/exec.c @@ -26,7 +26,6 @@ #include #include #include -#include #include #include #include @@ -61,6 +60,11 @@ #include #endif +#ifdef __alpha__ +/* for /sbin/loader handling in search_binary_handler() */ +#include +#endif + int core_uses_pid; char core_pattern[CORENAME_MAX_SIZE] = "core"; int suid_dumpable = 0; @@ -1155,7 +1159,7 @@ int search_binary_handler(struct linux_binprm *bprm,struct pt_regs *regs) { int try,retval; struct linux_binfmt *fmt; -#if defined(__alpha__) && defined(CONFIG_ARCH_SUPPORTS_AOUT) +#ifdef __alpha__ /* handle /sbin/loader.. */ { struct exec * eh = (struct exec *) bprm->buf; -- cgit v0.10.2 From a9e0f5293d4999f93b469af4e70382db800a8204 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:18:13 +0100 Subject: Remove last traces of a.out support from ELF loader. In commit d20894a23708c2af75966534f8e4dedb46d48db2 ("Remove a.out interpreter support in ELF loader"), Andi removed support for a.out interpreters from the ELF loader, which was only ever needed for the transition from a.out to ELF. This removes the last traces of that support, in particular the inclusion of . Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/fs/binfmt_elf.c b/fs/binfmt_elf.c index 0fa95b1..d48ff5f 100644 --- a/fs/binfmt_elf.c +++ b/fs/binfmt_elf.c @@ -16,7 +16,6 @@ #include #include #include -#include #include #include #include @@ -548,7 +547,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) struct { struct elfhdr elf_ex; struct elfhdr interp_elf_ex; - struct exec interp_ex; } *loc; loc = kmalloc(sizeof(*loc), GFP_KERNEL); @@ -680,7 +678,6 @@ static int load_elf_binary(struct linux_binprm *bprm, struct pt_regs *regs) } /* Get the exec headers */ - loc->interp_ex = *((struct exec *)bprm->buf); loc->interp_elf_ex = *((struct elfhdr *)bprm->buf); break; } -- cgit v0.10.2 From 9a8ea36967afad617d9b0930b6fe7592b9ed9772 Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:18:24 +0100 Subject: Remove #ifdef CONFIG_ARCH_SUPPORTS_AOUT from This file is only included where it makes sense now, so there's no need for the CONFIG_ARCH_SUPPORTS_AOUT conditional -- and that conditional is bad, because we want to export to userspace. Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/include/linux/a.out.h b/include/linux/a.out.h index 208f4e8..e86dfca 100644 --- a/include/linux/a.out.h +++ b/include/linux/a.out.h @@ -1,8 +1,6 @@ #ifndef __A_OUT_GNU_H__ #define __A_OUT_GNU_H__ -#ifdef CONFIG_ARCH_SUPPORTS_AOUT - #define __GNU_EXEC_MACROS__ #ifndef __STRUCT_EXEC_OVERRIDE__ @@ -277,10 +275,4 @@ struct relocation_info #endif /* no N_RELOCATION_INFO_DECLARED. */ #endif /*__ASSEMBLY__ */ -#else /* CONFIG_ARCH_SUPPORTS_AOUT */ -#ifndef __ASSEMBLY__ -struct exec { -}; -#endif -#endif /* CONFIG_ARCH_SUPPORTS_AOUT */ #endif /* __A_OUT_GNU_H__ */ -- cgit v0.10.2 From e53d6a152793a38aa334d6f7a4850642ae45cedc Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Mon, 16 Jun 2008 12:24:17 +0100 Subject: Export to userspace again. This seems to have been removed accidentally in commit ed7b1889da256977574663689b598d88950bbd23 ("Unexport asm/page.h"), but wasn't supposed to have been -- the original patch at http://lkml.org/lkml/2007/10/30/144 just moved it from $(header-y) to $(unifdef-y) Signed-off-by: David Woodhouse Acked-by: Peter Korsgaard Signed-off-by: Linus Torvalds diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 93b9885..b6fbb25 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -166,6 +166,9 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h +ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +unifdef-y += a.out.h +endif unifdef-y += apm_bios.h unifdef-y += atalk.h unifdef-y += atmdev.h -- cgit v0.10.2 From 3878f110f71a0971ff7acc15dd6db711b6ef37c6 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:30:49 -0700 Subject: ocfs2: Move the hb_ctl_path sysctl into the stack glue. ocfs2 needs to call out to the hb_ctl program at unmount for all cluster stacks. The first step is to move the hb_ctl_path sysctl out of the o2cb code and into the generic stack glue. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/cluster/nodemanager.c b/fs/ocfs2/cluster/nodemanager.c index cf9401e..cfdb08b 100644 --- a/fs/ocfs2/cluster/nodemanager.c +++ b/fs/ocfs2/cluster/nodemanager.c @@ -21,7 +21,6 @@ #include #include -#include #include #include "tcp.h" @@ -36,65 +35,6 @@ * cluster references throughout where nodes are looked up */ struct o2nm_cluster *o2nm_single_cluster = NULL; -#define OCFS2_MAX_HB_CTL_PATH 256 -static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; - -static ctl_table ocfs2_nm_table[] = { - { - .ctl_name = 1, - .procname = "hb_ctl_path", - .data = ocfs2_hb_ctl_path, - .maxlen = OCFS2_MAX_HB_CTL_PATH, - .mode = 0644, - .proc_handler = &proc_dostring, - .strategy = &sysctl_string, - }, - { .ctl_name = 0 } -}; - -static ctl_table ocfs2_mod_table[] = { - { - .ctl_name = FS_OCFS2_NM, - .procname = "nm", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_nm_table - }, - { .ctl_name = 0} -}; - -static ctl_table ocfs2_kern_table[] = { - { - .ctl_name = FS_OCFS2, - .procname = "ocfs2", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_mod_table - }, - { .ctl_name = 0} -}; - -static ctl_table ocfs2_root_table[] = { - { - .ctl_name = CTL_FS, - .procname = "fs", - .data = NULL, - .maxlen = 0, - .mode = 0555, - .child = ocfs2_kern_table - }, - { .ctl_name = 0 } -}; - -static struct ctl_table_header *ocfs2_table_header = NULL; - -const char *o2nm_get_hb_ctl_path(void) -{ - return ocfs2_hb_ctl_path; -} -EXPORT_SYMBOL_GPL(o2nm_get_hb_ctl_path); struct o2nm_node *o2nm_get_node_by_num(u8 node_num) { @@ -941,9 +881,6 @@ void o2nm_undepend_this_node(void) static void __exit exit_o2nm(void) { - if (ocfs2_table_header) - unregister_sysctl_table(ocfs2_table_header); - /* XXX sync with hb callbacks and shut down hb? */ o2net_unregister_hb_callbacks(); configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys); @@ -964,16 +901,9 @@ static int __init init_o2nm(void) if (ret) goto out; - ocfs2_table_header = register_sysctl_table(ocfs2_root_table); - if (!ocfs2_table_header) { - printk(KERN_ERR "nodemanager: unable to register sysctl\n"); - ret = -ENOMEM; /* or something. */ - goto out_o2net; - } - ret = o2net_register_hb_callbacks(); if (ret) - goto out_sysctl; + goto out_o2net; config_group_init(&o2nm_cluster_group.cs_subsys.su_group); mutex_init(&o2nm_cluster_group.cs_subsys.su_mutex); @@ -990,8 +920,6 @@ static int __init init_o2nm(void) configfs_unregister_subsystem(&o2nm_cluster_group.cs_subsys); out_callbacks: o2net_unregister_hb_callbacks(); -out_sysctl: - unregister_sysctl_table(ocfs2_table_header); out_o2net: o2net_exit(); out: diff --git a/fs/ocfs2/cluster/nodemanager.h b/fs/ocfs2/cluster/nodemanager.h index 7c86036..c992ea0 100644 --- a/fs/ocfs2/cluster/nodemanager.h +++ b/fs/ocfs2/cluster/nodemanager.h @@ -33,10 +33,6 @@ #include #include -#define FS_OCFS2_NM 1 - -const char *o2nm_get_hb_ctl_path(void); - struct o2nm_node { spinlock_t nd_lock; struct config_item nd_item; diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index bbd1667..fb26a7c 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -338,7 +338,7 @@ static void o2hb_stop(const char *group) int ret; char *argv[5], *envp[3]; - argv[0] = (char *)o2nm_get_hb_ctl_path(); + argv[0] = (char *)ocfs2_get_hb_ctl_path(); argv[1] = "-K"; argv[2] = "-u"; argv[3] = (char *)group; diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 119f60c..fb9b8e0 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -26,6 +26,7 @@ #include #include #include +#include #include "ocfs2_fs.h" @@ -548,10 +549,92 @@ error: return ret; } +/* + * Sysctl bits + * + * The sysctl lives at /proc/sys/fs/ocfs2/nm/hb_ctl_path. The 'nm' doesn't + * make as much sense in a multiple cluster stack world, but it's safer + * and easier to preserve the name. + */ + +#define FS_OCFS2_NM 1 + +#define OCFS2_MAX_HB_CTL_PATH 256 +static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; + +static ctl_table ocfs2_nm_table[] = { + { + .ctl_name = 1, + .procname = "hb_ctl_path", + .data = ocfs2_hb_ctl_path, + .maxlen = OCFS2_MAX_HB_CTL_PATH, + .mode = 0644, + .proc_handler = &proc_dostring, + .strategy = &sysctl_string, + }, + { .ctl_name = 0 } +}; + +static ctl_table ocfs2_mod_table[] = { + { + .ctl_name = FS_OCFS2_NM, + .procname = "nm", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_nm_table + }, + { .ctl_name = 0} +}; + +static ctl_table ocfs2_kern_table[] = { + { + .ctl_name = FS_OCFS2, + .procname = "ocfs2", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_mod_table + }, + { .ctl_name = 0} +}; + +static ctl_table ocfs2_root_table[] = { + { + .ctl_name = CTL_FS, + .procname = "fs", + .data = NULL, + .maxlen = 0, + .mode = 0555, + .child = ocfs2_kern_table + }, + { .ctl_name = 0 } +}; + +static struct ctl_table_header *ocfs2_table_header = NULL; + +const char *ocfs2_get_hb_ctl_path(void) +{ + return ocfs2_hb_ctl_path; +} +EXPORT_SYMBOL_GPL(ocfs2_get_hb_ctl_path); + + +/* + * Initialization + */ + static int __init ocfs2_stack_glue_init(void) { strcpy(cluster_stack_name, OCFS2_STACK_PLUGIN_O2CB); + ocfs2_table_header = register_sysctl_table(ocfs2_root_table); + if (!ocfs2_table_header) { + printk(KERN_ERR + "ocfs2 stack glue: unable to register sysctl\n"); + return -ENOMEM; /* or something. */ + } + return ocfs2_sysfs_init(); } @@ -559,6 +642,8 @@ static void __exit ocfs2_stack_glue_exit(void) { lproto = NULL; ocfs2_sysfs_exit(); + if (ocfs2_table_header) + unregister_sysctl_table(ocfs2_table_header); } MODULE_AUTHOR("Oracle"); diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index 005e4f1..c9fb01a 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -258,4 +258,6 @@ void ocfs2_stack_glue_set_locking_protocol(struct ocfs2_locking_protocol *proto) /* Used by stack plugins */ int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin); void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin); +const char *ocfs2_get_hb_ctl_path(void); + #endif /* STACKGLUE_H */ -- cgit v0.10.2 From 9f9a99f4eccc64650e932090cff0ebd07b81e334 Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:43:58 -0700 Subject: ocfs2: Move the call of ocfs2_hb_ctl into the stack glue. Take o2hb_stop() out of the o2cb code and make it part of the generic stack glue as ocfs2_leave_group(). This also allows us to remove the ocfs2_get_hb_ctl_path() function - everything to do with hb_ctl is now part of stackglue.c. o2cb no longer needs a ->hangup() function. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index fb26a7c..765ade5 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -333,43 +333,6 @@ static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn, return 0; } -static void o2hb_stop(const char *group) -{ - int ret; - char *argv[5], *envp[3]; - - argv[0] = (char *)ocfs2_get_hb_ctl_path(); - argv[1] = "-K"; - argv[2] = "-u"; - argv[3] = (char *)group; - argv[4] = NULL; - - mlog(0, "Run: %s %s %s %s\n", argv[0], argv[1], argv[2], argv[3]); - - /* minimal command environment taken from cpu_run_sbin_hotplug */ - envp[0] = "HOME=/"; - envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; - envp[2] = NULL; - - ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC); - if (ret < 0) - mlog_errno(ret); -} - -/* - * Hangup is a hack for tools compatibility. Older ocfs2-tools software - * expects the filesystem to call "ocfs2_hb_ctl" during unmount. This - * happens regardless of whether the DLM got started, so we can't do it - * in ocfs2_cluster_disconnect(). We bring the o2hb_stop() function into - * the glue and provide a "hangup" API for super.c to call. - * - * Other stacks will eventually provide a NULL ->hangup() pointer. - */ -static void o2cb_cluster_hangup(const char *group, int grouplen) -{ - o2hb_stop(group); -} - static int o2cb_cluster_this_node(unsigned int *node) { int node_num; @@ -388,7 +351,6 @@ static int o2cb_cluster_this_node(unsigned int *node) static struct ocfs2_stack_operations o2cb_stack_ops = { .connect = o2cb_cluster_connect, .disconnect = o2cb_cluster_disconnect, - .hangup = o2cb_cluster_hangup, .this_node = o2cb_cluster_this_node, .dlm_lock = o2cb_dlm_lock, .dlm_unlock = o2cb_dlm_unlock, diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index fb9b8e0..5f78ff4 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -34,11 +34,13 @@ #define OCFS2_STACK_PLUGIN_O2CB "o2cb" #define OCFS2_STACK_PLUGIN_USER "user" +#define OCFS2_MAX_HB_CTL_PATH 256 static struct ocfs2_locking_protocol *lproto; static DEFINE_SPINLOCK(ocfs2_stack_lock); static LIST_HEAD(ocfs2_stack_list); static char cluster_stack_name[OCFS2_STACK_LABEL_LEN + 1]; +static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; /* * The stack currently in use. If not null, active_stack->sp_count > 0, @@ -363,6 +365,42 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn, } EXPORT_SYMBOL_GPL(ocfs2_cluster_disconnect); +/* + * Leave the group for this filesystem. This is executed by a userspace + * program (stored in ocfs2_hb_ctl_path). + */ +static void ocfs2_leave_group(const char *group) +{ + int ret; + char *argv[5], *envp[3]; + + argv[0] = ocfs2_hb_ctl_path; + argv[1] = "-K"; + argv[2] = "-u"; + argv[3] = (char *)group; + argv[4] = NULL; + + /* minimal command environment taken from cpu_run_sbin_hotplug */ + envp[0] = "HOME=/"; + envp[1] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin"; + envp[2] = NULL; + + ret = call_usermodehelper(argv[0], argv, envp, UMH_WAIT_PROC); + if (ret < 0) { + printk(KERN_ERR + "ocfs2: Error %d running user helper " + "\"%s %s %s %s\"\n", + ret, argv[0], argv[1], argv[2], argv[3]); + } +} + +/* + * Hangup is a required post-umount. ocfs2-tools software expects the + * filesystem to call "ocfs2_hb_ctl" during unmount. This happens + * regardless of whether the DLM got started, so we can't do it + * in ocfs2_cluster_disconnect(). The ocfs2_leave_group() function does + * the actual work. + */ void ocfs2_cluster_hangup(const char *group, int grouplen) { BUG_ON(group == NULL); @@ -371,6 +409,8 @@ void ocfs2_cluster_hangup(const char *group, int grouplen) if (active_stack->sp_ops->hangup) active_stack->sp_ops->hangup(group, grouplen); + ocfs2_leave_group(group); + /* cluster_disconnect() was called with hangup_pending==1 */ ocfs2_stack_driver_put(); } @@ -559,9 +599,6 @@ error: #define FS_OCFS2_NM 1 -#define OCFS2_MAX_HB_CTL_PATH 256 -static char ocfs2_hb_ctl_path[OCFS2_MAX_HB_CTL_PATH] = "/sbin/ocfs2_hb_ctl"; - static ctl_table ocfs2_nm_table[] = { { .ctl_name = 1, @@ -613,12 +650,6 @@ static ctl_table ocfs2_root_table[] = { static struct ctl_table_header *ocfs2_table_header = NULL; -const char *ocfs2_get_hb_ctl_path(void) -{ - return ocfs2_hb_ctl_path; -} -EXPORT_SYMBOL_GPL(ocfs2_get_hb_ctl_path); - /* * Initialization diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index c9fb01a..fe3fd2a 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -258,6 +258,5 @@ void ocfs2_stack_glue_set_locking_protocol(struct ocfs2_locking_protocol *proto) /* Used by stack plugins */ int ocfs2_stack_glue_register(struct ocfs2_stack_plugin *plugin); void ocfs2_stack_glue_unregister(struct ocfs2_stack_plugin *plugin); -const char *ocfs2_get_hb_ctl_path(void); #endif /* STACKGLUE_H */ -- cgit v0.10.2 From 2c39450b39880e162b3eb339672314101f58ee1a Mon Sep 17 00:00:00 2001 From: Joel Becker Date: Fri, 30 May 2008 15:58:26 -0700 Subject: ocfs2: Remove ->hangup() from stack glue operations. The ->hangup() call was only used to execute ocfs2_hb_ctl. Now that the generic stack glue code handles this, the underlying stack drivers don't need to know about it. Signed-off-by: Joel Becker Signed-off-by: Mark Fasheh diff --git a/fs/ocfs2/stack_o2cb.c b/fs/ocfs2/stack_o2cb.c index 765ade5..fcd120f 100644 --- a/fs/ocfs2/stack_o2cb.c +++ b/fs/ocfs2/stack_o2cb.c @@ -317,8 +317,7 @@ out: return rc; } -static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn, - int hangup_pending) +static int o2cb_cluster_disconnect(struct ocfs2_cluster_connection *conn) { struct dlm_ctxt *dlm = conn->cc_lockspace; struct o2dlm_private *priv = conn->cc_private; diff --git a/fs/ocfs2/stack_user.c b/fs/ocfs2/stack_user.c index 6b97d11..c021280 100644 --- a/fs/ocfs2/stack_user.c +++ b/fs/ocfs2/stack_user.c @@ -816,8 +816,7 @@ out: return rc; } -static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn, - int hangup_pending) +static int user_cluster_disconnect(struct ocfs2_cluster_connection *conn) { dlm_release_lockspace(conn->cc_lockspace, 2); conn->cc_lockspace = NULL; diff --git a/fs/ocfs2/stackglue.c b/fs/ocfs2/stackglue.c index 5f78ff4..10e149a 100644 --- a/fs/ocfs2/stackglue.c +++ b/fs/ocfs2/stackglue.c @@ -352,7 +352,7 @@ int ocfs2_cluster_disconnect(struct ocfs2_cluster_connection *conn, BUG_ON(conn == NULL); - ret = active_stack->sp_ops->disconnect(conn, hangup_pending); + ret = active_stack->sp_ops->disconnect(conn); /* XXX Should we free it anyway? */ if (!ret) { @@ -406,9 +406,6 @@ void ocfs2_cluster_hangup(const char *group, int grouplen) BUG_ON(group == NULL); BUG_ON(group[grouplen] != '\0'); - if (active_stack->sp_ops->hangup) - active_stack->sp_ops->hangup(group, grouplen); - ocfs2_leave_group(group); /* cluster_disconnect() was called with hangup_pending==1 */ diff --git a/fs/ocfs2/stackglue.h b/fs/ocfs2/stackglue.h index fe3fd2a..db56281 100644 --- a/fs/ocfs2/stackglue.h +++ b/fs/ocfs2/stackglue.h @@ -134,22 +134,10 @@ struct ocfs2_stack_operations { * be freed. Thus, a stack must not return from ->disconnect() * until it will no longer reference the conn pointer. * - * If hangup_pending is zero, ocfs2_cluster_disconnect() will also - * be dropping the reference on the module. + * Once this call returns, the stack glue will be dropping this + * connection's reference on the module. */ - int (*disconnect)(struct ocfs2_cluster_connection *conn, - int hangup_pending); - - /* - * ocfs2_cluster_hangup() exists for compatibility with older - * ocfs2 tools. Only the classic stack really needs it. As such - * ->hangup() is not required of all stacks. See the comment by - * ocfs2_cluster_hangup() for more details. - * - * Note that ocfs2_cluster_hangup() can only be called if - * hangup_pending was passed to ocfs2_cluster_disconnect(). - */ - void (*hangup)(const char *group, int grouplen); + int (*disconnect)(struct ocfs2_cluster_connection *conn); /* * ->this_node() returns the cluster's unique identifier for the -- cgit v0.10.2 From f9ffcedddba5b2fc5ab16ef08bca55af8be2717e Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 16 Jun 2008 16:38:33 -0700 Subject: pkt_sched: HTB scheduler, change default hysteresis mode to off. The HTB hysteresis mode reduce the CPU load, but at the cost of scheduling accuracy. On ADSL links (512 kbit/s upstream), this inaccuracy introduce significant jitter, enought to disturbe VoIP. For details see my masters thesis (http://www.adsl-optimizer.dk/thesis/), chapter 7, section 7.3.1, pp 69-70. Signed-off-by: Jesper Dangaard Brouer Acked-by: Martin Devera Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 5bc1ed4..9134f02 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -53,7 +53,7 @@ */ #define HTB_HSIZE 16 /* classid hash size */ -#define HTB_HYSTERESIS 1 /* whether to use mode hysteresis for speedup */ +#define HTB_HYSTERESIS 0 /* whether to use mode hysteresis for speedup */ #define HTB_VER 0x30011 /* major must be matched with number suplied by TC as version */ #if HTB_VER >> 16 != TC_HTB_PROTOVER -- cgit v0.10.2 From 47083fc0735f5145b72fc31236d07339dc52b908 Mon Sep 17 00:00:00 2001 From: Jesper Dangaard Brouer Date: Mon, 16 Jun 2008 16:39:32 -0700 Subject: pkt_sched: Change HTB_HYSTERESIS to a runtime parameter htb_hysteresis. Add a htb_hysteresis parameter to htb_sch.ko and by sysfs magic make it runtime adjustable via /sys/module/sch_htb/parameters/htb_hysteresis mode 640. Signed-off-by: Jesper Dangaard Brouer Acked-by: Martin Devera Signed-off-by: David S. Miller diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 9134f02..6807c97 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -28,6 +28,7 @@ * $Id: sch_htb.c,v 1.25 2003/12/07 11:08:25 devik Exp devik $ */ #include +#include #include #include #include @@ -53,13 +54,17 @@ */ #define HTB_HSIZE 16 /* classid hash size */ -#define HTB_HYSTERESIS 0 /* whether to use mode hysteresis for speedup */ +static int htb_hysteresis __read_mostly = 0; /* whether to use mode hysteresis for speedup */ #define HTB_VER 0x30011 /* major must be matched with number suplied by TC as version */ #if HTB_VER >> 16 != TC_HTB_PROTOVER #error "Mismatched sch_htb.c and pkt_sch.h" #endif +/* Module parameter and sysfs export */ +module_param (htb_hysteresis, int, 0640); +MODULE_PARM_DESC(htb_hysteresis, "Hysteresis mode, less CPU load, less accurate"); + /* used internaly to keep status of single class */ enum htb_cmode { HTB_CANT_SEND, /* class can't send and can't borrow */ @@ -462,19 +467,21 @@ static void htb_deactivate_prios(struct htb_sched *q, struct htb_class *cl) htb_remove_class_from_row(q, cl, mask); } -#if HTB_HYSTERESIS static inline long htb_lowater(const struct htb_class *cl) { - return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0; + if (htb_hysteresis) + return cl->cmode != HTB_CANT_SEND ? -cl->cbuffer : 0; + else + return 0; } static inline long htb_hiwater(const struct htb_class *cl) { - return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0; + if (htb_hysteresis) + return cl->cmode == HTB_CAN_SEND ? -cl->buffer : 0; + else + return 0; } -#else -#define htb_lowater(cl) (0) -#define htb_hiwater(cl) (0) -#endif + /** * htb_class_mode - computes and returns current class mode -- cgit v0.10.2 From 2b4743bd6be9fedaa560f8c6dc3997e9ec21b99b Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Mon, 16 Jun 2008 16:48:20 -0700 Subject: ipv6 sit: Avoid extra need for compat layer in PRL management. We've introduced extra need of compat layer for ip_tunnel_prl{} for PRL (Potential Router List) management. Though compat_ioctl is still missing in ipv4/ipv6, let's make the interface more straight-forward and eliminate extra need for nasty compat layer anyway since the interface is new for 2.6.26. Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/linux/if_tunnel.h b/include/linux/if_tunnel.h index f1fbe9c..d4efe40 100644 --- a/include/linux/if_tunnel.h +++ b/include/linux/if_tunnel.h @@ -41,7 +41,7 @@ struct ip_tunnel_prl { __u16 __reserved; __u32 datalen; __u32 __reserved2; - void __user *data; + /* data follows */ }; /* PRL flags */ diff --git a/net/ipv6/sit.c b/net/ipv6/sit.c index 3de6ffd..32e871a 100644 --- a/net/ipv6/sit.c +++ b/net/ipv6/sit.c @@ -222,15 +222,18 @@ __ipip6_tunnel_locate_prl(struct ip_tunnel *t, __be32 addr) } -static int ipip6_tunnel_get_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a) +static int ipip6_tunnel_get_prl(struct ip_tunnel *t, + struct ip_tunnel_prl __user *a) { - struct ip_tunnel_prl *kp; + struct ip_tunnel_prl kprl, *kp; struct ip_tunnel_prl_entry *prl; unsigned int cmax, c = 0, ca, len; int ret = 0; - cmax = a->datalen / sizeof(*a); - if (cmax > 1 && a->addr != htonl(INADDR_ANY)) + if (copy_from_user(&kprl, a, sizeof(kprl))) + return -EFAULT; + cmax = kprl.datalen / sizeof(kprl); + if (cmax > 1 && kprl.addr != htonl(INADDR_ANY)) cmax = 1; /* For simple GET or for root users, @@ -261,26 +264,25 @@ static int ipip6_tunnel_get_prl(struct ip_tunnel *t, struct ip_tunnel_prl *a) for (prl = t->prl; prl; prl = prl->next) { if (c > cmax) break; - if (a->addr != htonl(INADDR_ANY) && prl->addr != a->addr) + if (kprl.addr != htonl(INADDR_ANY) && prl->addr != kprl.addr) continue; kp[c].addr = prl->addr; kp[c].flags = prl->flags; c++; - if (a->addr != htonl(INADDR_ANY)) + if (kprl.addr != htonl(INADDR_ANY)) break; } out: read_unlock(&ipip6_lock); len = sizeof(*kp) * c; - ret = len ? copy_to_user(a->data, kp, len) : 0; + ret = 0; + if ((len && copy_to_user(a + 1, kp, len)) || put_user(len, &a->datalen)) + ret = -EFAULT; kfree(kp); - if (ret) - return -EFAULT; - a->datalen = len; - return 0; + return ret; } static int @@ -873,11 +875,20 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) break; case SIOCGETPRL: + err = -EINVAL; + if (dev == sitn->fb_tunnel_dev) + goto done; + err = -ENOENT; + if (!(t = netdev_priv(dev))) + goto done; + err = ipip6_tunnel_get_prl(t, ifr->ifr_ifru.ifru_data); + break; + case SIOCADDPRL: case SIOCDELPRL: case SIOCCHGPRL: err = -EPERM; - if (cmd != SIOCGETPRL && !capable(CAP_NET_ADMIN)) + if (!capable(CAP_NET_ADMIN)) goto done; err = -EINVAL; if (dev == sitn->fb_tunnel_dev) @@ -890,12 +901,6 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) goto done; switch (cmd) { - case SIOCGETPRL: - err = ipip6_tunnel_get_prl(t, &prl); - if (!err && copy_to_user(ifr->ifr_ifru.ifru_data, - &prl, sizeof(prl))) - err = -EFAULT; - break; case SIOCDELPRL: err = ipip6_tunnel_del_prl(t, &prl); break; @@ -904,8 +909,7 @@ ipip6_tunnel_ioctl (struct net_device *dev, struct ifreq *ifr, int cmd) err = ipip6_tunnel_add_prl(t, &prl, cmd == SIOCCHGPRL); break; } - if (cmd != SIOCGETPRL) - netdev_state_change(dev); + netdev_state_change(dev); break; default: -- cgit v0.10.2 From 93653e0448196344d7699ccad395eaebd30359d1 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 16 Jun 2008 16:57:40 -0700 Subject: tcp: Revert reset of deferred accept changes in 2.6.26 Ingo's system is still seeing strange behavior, and he reports that is goes away if the rest of the deferred accept changes are reverted too. Therefore this reverts e4c78840284f3f51b1896cf3936d60a6033c4d2c ("[TCP]: TCP_DEFER_ACCEPT updates - dont retxmt synack") and 539fae89bebd16ebeafd57a87169bc56eb530d76 ("[TCP]: TCP_DEFER_ACCEPT updates - defer timeout conflicts with max_thresh"). Just like the other revert, these ideas can be revisited for 2.6.27 Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_connection_sock.c b/net/ipv4/inet_connection_sock.c index 045e799..ec83448 100644 --- a/net/ipv4/inet_connection_sock.c +++ b/net/ipv4/inet_connection_sock.c @@ -466,9 +466,9 @@ void inet_csk_reqsk_queue_prune(struct sock *parent, reqp=&lopt->syn_table[i]; while ((req = *reqp) != NULL) { if (time_after_eq(now, req->expires)) { - if ((req->retrans < (inet_rsk(req)->acked ? max_retries : thresh)) && - (inet_rsk(req)->acked || - !req->rsk_ops->rtx_syn_ack(parent, req))) { + if ((req->retrans < thresh || + (inet_rsk(req)->acked && req->retrans < max_retries)) + && !req->rsk_ops->rtx_syn_ack(parent, req)) { unsigned long timeo; if (req->retrans++ == 0) -- cgit v0.10.2 From 80896a3584bbff9ff9ad4dde735517c4de68d736 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 16 Jun 2008 16:59:55 -0700 Subject: sctp: Correctly cleanup procfs entries upon failure. This patch remove the proc fs entry which has been created if fail to set up proc fs entry for the SCTP protocol. Signed-off-by: Wei Yongjun Acked-by: Neil Horman Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c index b435a19..9258dfe 100644 --- a/net/sctp/protocol.c +++ b/net/sctp/protocol.c @@ -108,14 +108,23 @@ static __init int sctp_proc_init(void) } if (sctp_snmp_proc_init()) - goto out_nomem; + goto out_snmp_proc_init; if (sctp_eps_proc_init()) - goto out_nomem; + goto out_eps_proc_init; if (sctp_assocs_proc_init()) - goto out_nomem; + goto out_assocs_proc_init; return 0; +out_assocs_proc_init: + sctp_eps_proc_exit(); +out_eps_proc_init: + sctp_snmp_proc_exit(); +out_snmp_proc_init: + if (proc_net_sctp) { + proc_net_sctp = NULL; + remove_proc_entry("sctp", init_net.proc_net); + } out_nomem: return -ENOMEM; } -- cgit v0.10.2 From 319fa2a24f652dc35e613360c4532b8d2a771add Mon Sep 17 00:00:00 2001 From: Vlad Yasevich Date: Mon, 16 Jun 2008 17:00:29 -0700 Subject: sctp: Correclty set changeover_active for SFR-CACC Right now, any time we set a primary transport we set the changeover_active flag. As a result, we invoke SFR-CACC even when there has been no changeover events. Only set changeover_active, when there is a true changeover event, i.e. we had a primary path and we are changing to another transport. Signed-off-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/associola.c b/net/sctp/associola.c index 5326348..024c3eb 100644 --- a/net/sctp/associola.c +++ b/net/sctp/associola.c @@ -474,6 +474,15 @@ static void sctp_association_destroy(struct sctp_association *asoc) void sctp_assoc_set_primary(struct sctp_association *asoc, struct sctp_transport *transport) { + int changeover = 0; + + /* it's a changeover only if we already have a primary path + * that we are changing + */ + if (asoc->peer.primary_path != NULL && + asoc->peer.primary_path != transport) + changeover = 1 ; + asoc->peer.primary_path = transport; /* Set a default msg_name for events. */ @@ -499,12 +508,12 @@ void sctp_assoc_set_primary(struct sctp_association *asoc, * double switch to the same destination address. */ if (transport->cacc.changeover_active) - transport->cacc.cycling_changeover = 1; + transport->cacc.cycling_changeover = changeover; /* 2) The sender MUST set CHANGEOVER_ACTIVE to indicate that * a changeover has occurred. */ - transport->cacc.changeover_active = 1; + transport->cacc.changeover_active = changeover; /* 3) The sender MUST store the next TSN to be sent in * next_tsn_at_change. -- cgit v0.10.2 From 6de329e26caed7bbbf51229c80f3948549d3c010 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 16 Jun 2008 17:02:28 -0700 Subject: net: Fix test for VLAN TX checksum offload capability Selected device feature bits can be propagated to VLAN devices, so we can make use of TX checksum offload and TSO on VLAN-tagged packets. However, if the physical device does not do VLAN tag insertion or generic checksum offload then the test for TX checksum offload in dev_queue_xmit() will see a protocol of htons(ETH_P_8021Q) and yield false. This splits the checksum offload test into two functions: - can_checksum_protocol() tests a given protocol against a feature bitmask - dev_can_checksum() first tests the skb protocol against the device features; if that fails and the protocol is htons(ETH_P_8021Q) then it tests the encapsulated protocol against the effective device features for VLANs Signed-off-by: Ben Hutchings Acked-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 5829630..68d8df0 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -119,6 +119,7 @@ #include #include #include +#include #include "net-sysfs.h" @@ -1362,6 +1363,29 @@ void netif_device_attach(struct net_device *dev) } EXPORT_SYMBOL(netif_device_attach); +static bool can_checksum_protocol(unsigned long features, __be16 protocol) +{ + return ((features & NETIF_F_GEN_CSUM) || + ((features & NETIF_F_IP_CSUM) && + protocol == htons(ETH_P_IP)) || + ((features & NETIF_F_IPV6_CSUM) && + protocol == htons(ETH_P_IPV6))); +} + +static bool dev_can_checksum(struct net_device *dev, struct sk_buff *skb) +{ + if (can_checksum_protocol(dev->features, skb->protocol)) + return true; + + if (skb->protocol == htons(ETH_P_8021Q)) { + struct vlan_ethhdr *veh = (struct vlan_ethhdr *)skb->data; + if (can_checksum_protocol(dev->features & dev->vlan_features, + veh->h_vlan_encapsulated_proto)) + return true; + } + + return false; +} /* * Invalidate hardware checksum when packet is to be mangled, and @@ -1640,14 +1664,8 @@ int dev_queue_xmit(struct sk_buff *skb) if (skb->ip_summed == CHECKSUM_PARTIAL) { skb_set_transport_header(skb, skb->csum_start - skb_headroom(skb)); - - if (!(dev->features & NETIF_F_GEN_CSUM) && - !((dev->features & NETIF_F_IP_CSUM) && - skb->protocol == htons(ETH_P_IP)) && - !((dev->features & NETIF_F_IPV6_CSUM) && - skb->protocol == htons(ETH_P_IPV6))) - if (skb_checksum_help(skb)) - goto out_kfree_skb; + if (!dev_can_checksum(dev, skb) && skb_checksum_help(skb)) + goto out_kfree_skb; } gso: -- cgit v0.10.2 From 68be802cd5ad040fe8cfa33ce3031405df2d9117 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 16 Jun 2008 17:03:32 -0700 Subject: raw: Restore /proc/net/raw correct behavior I just noticed "cat /proc/net/raw" was buggy, missing '\n' separators. I believe this was introduced by commit 8cd850efa4948d57a2ed836911cfd1ab299e89c6 ([RAW]: Cleanup IPv4 raw_seq_show.) This trivial patch restores correct behavior, and applies to current Linus tree (should also be applied to stable tree as well.) Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/raw.c b/net/ipv4/raw.c index e7e091d..37a1ecd 100644 --- a/net/ipv4/raw.c +++ b/net/ipv4/raw.c @@ -934,7 +934,7 @@ static void raw_sock_seq_show(struct seq_file *seq, struct sock *sp, int i) srcp = inet->num; seq_printf(seq, "%4d: %08X:%04X %08X:%04X" - " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d", + " %02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %d\n", i, src, srcp, dest, destp, sp->sk_state, atomic_read(&sp->sk_wmem_alloc), atomic_read(&sp->sk_rmem_alloc), -- cgit v0.10.2 From a9d246dbb07cf0bd32bbfc5d184ed738bf2af4f8 Mon Sep 17 00:00:00 2001 From: Rami Rosen Date: Mon, 16 Jun 2008 17:07:16 -0700 Subject: ipv4: Remove unused definitions in net/ipv4/tcp_ipv4.c. 1) Remove ICMP_MIN_LENGTH, as it is unused. 2) Remove unneeded tcp_v4_send_check() declaration. Signed-off-by: Rami Rosen Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 97a2300..12695be 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -85,10 +85,6 @@ int sysctl_tcp_tw_reuse __read_mostly; int sysctl_tcp_low_latency __read_mostly; -/* Check TCP sequence numbers in ICMP packets. */ -#define ICMP_MIN_LENGTH 8 - -void tcp_v4_send_check(struct sock *sk, int len, struct sk_buff *skb); #ifdef CONFIG_TCP_MD5SIG static struct tcp_md5sig_key *tcp_v4_md5_do_lookup(struct sock *sk, -- cgit v0.10.2 From 27141666b69f535a4d63d7bc6d9e84ee5032f82a Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Mon, 16 Jun 2008 17:15:33 -0700 Subject: atm: [br2684] Fix oops due to skb->dev being NULL It happens that if a packet arrives in a VC between the call to open it on the hardware and the call to change the backend to br2684, br2684_regvcc processes the packet and oopses dereferencing skb->dev because it is NULL before the call to br2684_push(). Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: Chas Williams diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 9d52ebf..ac60350 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -518,9 +518,9 @@ static int br2684_regvcc(struct atm_vcc *atmvcc, void __user * arg) struct sk_buff *next = skb->next; skb->next = skb->prev = NULL; + br2684_push(atmvcc, skb); BRPRIV(skb->dev)->stats.rx_bytes -= skb->len; BRPRIV(skb->dev)->stats.rx_packets--; - br2684_push(atmvcc, skb); skb = next; } -- cgit v0.10.2 From c0ed0b60f2c36acfebb53384a3b24d13b3a09309 Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Mon, 16 Jun 2008 17:16:04 -0700 Subject: atm: [iphase] set drvdata before enabling interrupts Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: Chas Williams Signed-off-by: David S. Miller diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 5c28ca7..800c09e 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -3198,6 +3198,8 @@ static int __devinit ia_init_one(struct pci_dev *pdev, IF_INIT(printk("dev_id = 0x%x iadev->LineRate = %d \n", (u32)dev, iadev->LineRate);) + pci_set_drvdata(pdev, dev); + ia_dev[iadev_count] = iadev; _ia_dev[iadev_count] = dev; iadev_count++; @@ -3219,8 +3221,6 @@ static int __devinit ia_init_one(struct pci_dev *pdev, iadev->next_board = ia_boards; ia_boards = dev; - pci_set_drvdata(pdev, dev); - return 0; err_out_deregister_dev: -- cgit v0.10.2 From d6c1d704ab5d2e13bebb096e415156a9c54a3d32 Mon Sep 17 00:00:00 2001 From: "Jorge Boncompte [DTI2]" Date: Mon, 16 Jun 2008 17:16:35 -0700 Subject: atm: [iphase] doesn't call phy->start due to a bogus #ifndef This causes the suni driver to oops if you try to use sonetdiag to get the statistics. Also add the corresponding phy->stop call to fix another oops if you try to remove the module. Signed-off-by: Jorge Boncompte [DTI2] Signed-off-by: Chas Williams Signed-off-by: David S. Miller diff --git a/drivers/atm/iphase.c b/drivers/atm/iphase.c index 800c09e..139fce6 100644 --- a/drivers/atm/iphase.c +++ b/drivers/atm/iphase.c @@ -2562,17 +2562,11 @@ static int __devinit ia_start(struct atm_dev *dev) error = suni_init(dev); if (error) goto err_free_rx; - /* - * Enable interrupt on loss of signal - * SUNI_RSOP_CIE - 0x10 - * SUNI_RSOP_CIE_LOSE - 0x04 - */ - ia_phy_put(dev, ia_phy_get(dev, 0x10) | 0x04, 0x10); -#ifndef MODULE - error = dev->phy->start(dev); - if (error) - goto err_free_rx; -#endif + if (dev->phy->start) { + error = dev->phy->start(dev); + if (error) + goto err_free_rx; + } /* Get iadev->carrier_detect status */ IaFrontEndIntr(iadev); } @@ -3238,9 +3232,14 @@ static void __devexit ia_remove_one(struct pci_dev *pdev) struct atm_dev *dev = pci_get_drvdata(pdev); IADEV *iadev = INPH_IA_DEV(dev); - ia_phy_put(dev, ia_phy_get(dev,0x10) & ~(0x4), 0x10); + /* Disable phy interrupts */ + ia_phy_put(dev, ia_phy_get(dev, SUNI_RSOP_CIE) & ~(SUNI_RSOP_CIE_LOSE), + SUNI_RSOP_CIE); udelay(1); + if (dev->phy && dev->phy->stop) + dev->phy->stop(dev); + /* De-register device */ free_irq(iadev->irq, dev); iadev_count--; -- cgit v0.10.2 From 059e3779b59527150e1d1942026ec149192cbf77 Mon Sep 17 00:00:00 2001 From: Chas Williams Date: Mon, 16 Jun 2008 17:17:31 -0700 Subject: atm: [he] only support suni driver on multimode interfaces Signed-off-by: Chas Williams Signed-off-by: David S. Miller diff --git a/drivers/atm/he.c b/drivers/atm/he.c index ffc4a5a..320320e 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1542,7 +1542,8 @@ he_start(struct atm_dev *dev) /* initialize framer */ #ifdef CONFIG_ATM_HE_USE_SUNI - suni_init(he_dev->atm_dev); + if (he_isMM(he_dev)) + suni_init(he_dev->atm_dev); if (he_dev->atm_dev->phy && he_dev->atm_dev->phy->start) he_dev->atm_dev->phy->start(he_dev->atm_dev); #endif /* CONFIG_ATM_HE_USE_SUNI */ diff --git a/drivers/atm/he.h b/drivers/atm/he.h index fe6cd15a..b87d6cc 100644 --- a/drivers/atm/he.h +++ b/drivers/atm/he.h @@ -267,13 +267,7 @@ struct he_dev { char prod_id[30]; char mac_addr[6]; - int media; /* - * 0x26 = HE155 MM - * 0x27 = HE622 MM - * 0x46 = HE155 SM - * 0x47 = HE622 SM - */ - + int media; unsigned int vcibits, vpibits; unsigned int cells_per_row; @@ -392,6 +386,7 @@ struct he_vcc #define HE_DEV(dev) ((struct he_dev *) (dev)->dev_data) #define he_is622(dev) ((dev)->media & 0x1) +#define he_isMM(dev) ((dev)->media & 0x20) #define HE_REGMAP_SIZE 0x100000 @@ -876,8 +871,8 @@ struct he_vcc #define M_SN 0x3a /* integer */ #define MEDIA 0x3e /* integer */ #define HE155MM 0x26 -#define HE155SM 0x27 -#define HE622MM 0x46 +#define HE622MM 0x27 +#define HE155SM 0x46 #define HE622SM 0x47 #define MAC_ADDR 0x42 /* char[] */ -- cgit v0.10.2 From 7e903c2ae36efb526eacab3b25d00e90424bd8a8 Mon Sep 17 00:00:00 2001 From: Eric Kinzie Date: Mon, 16 Jun 2008 17:18:18 -0700 Subject: atm: [br2864] fix routed vcmux support From: Eric Kinzie Signed-off-by: Chas Williams Signed-off-by: David S. Miller diff --git a/net/atm/br2684.c b/net/atm/br2684.c index ac60350..05fafdc 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -188,10 +188,13 @@ static int br2684_xmit_vcc(struct sk_buff *skb, struct br2684_dev *brdev, return 0; } } - } else { - skb_push(skb, 2); - if (brdev->payload == p_bridged) + } else { /* e_vc */ + if (brdev->payload == p_bridged) { + skb_push(skb, 2); memset(skb->data, 0, 2); + } else { /* p_routed */ + skb_pull(skb, ETH_HLEN); + } } skb_debug(skb); @@ -377,11 +380,8 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb) (skb->data + 6, ethertype_ipv4, sizeof(ethertype_ipv4)) == 0) skb->protocol = __constant_htons(ETH_P_IP); - else { - brdev->stats.rx_errors++; - dev_kfree_skb(skb); - return; - } + else + goto error; skb_pull(skb, sizeof(llc_oui_ipv4)); skb_reset_network_header(skb); skb->pkt_type = PACKET_HOST; @@ -394,44 +394,56 @@ static void br2684_push(struct atm_vcc *atmvcc, struct sk_buff *skb) (memcmp(skb->data, llc_oui_pid_pad, 7) == 0)) { skb_pull(skb, sizeof(llc_oui_pid_pad)); skb->protocol = eth_type_trans(skb, net_dev); - } else { - brdev->stats.rx_errors++; - dev_kfree_skb(skb); - return; - } + } else + goto error; - } else { - /* first 2 chars should be 0 */ - if (*((u16 *) (skb->data)) != 0) { - brdev->stats.rx_errors++; - dev_kfree_skb(skb); - return; + } else { /* e_vc */ + if (brdev->payload == p_routed) { + struct iphdr *iph; + + skb_reset_network_header(skb); + iph = ip_hdr(skb); + if (iph->version == 4) + skb->protocol = __constant_htons(ETH_P_IP); + else if (iph->version == 6) + skb->protocol = __constant_htons(ETH_P_IPV6); + else + goto error; + skb->pkt_type = PACKET_HOST; + } else { /* p_bridged */ + /* first 2 chars should be 0 */ + if (*((u16 *) (skb->data)) != 0) + goto error; + skb_pull(skb, BR2684_PAD_LEN); + skb->protocol = eth_type_trans(skb, net_dev); } - skb_pull(skb, BR2684_PAD_LEN + ETH_HLEN); /* pad, dstmac, srcmac, ethtype */ - skb->protocol = eth_type_trans(skb, net_dev); } #ifdef CONFIG_ATM_BR2684_IPFILTER - if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) { - brdev->stats.rx_dropped++; - dev_kfree_skb(skb); - return; - } + if (unlikely(packet_fails_filter(skb->protocol, brvcc, skb))) + goto dropped; #endif /* CONFIG_ATM_BR2684_IPFILTER */ skb->dev = net_dev; ATM_SKB(skb)->vcc = atmvcc; /* needed ? */ pr_debug("received packet's protocol: %x\n", ntohs(skb->protocol)); skb_debug(skb); - if (unlikely(!(net_dev->flags & IFF_UP))) { - /* sigh, interface is down */ - brdev->stats.rx_dropped++; - dev_kfree_skb(skb); - return; - } + /* sigh, interface is down? */ + if (unlikely(!(net_dev->flags & IFF_UP))) + goto dropped; brdev->stats.rx_packets++; brdev->stats.rx_bytes += skb->len; memset(ATM_SKB(skb), 0, sizeof(struct atm_skb_data)); netif_rx(skb); + return; + +dropped: + brdev->stats.rx_dropped++; + goto free_skb; +error: + brdev->stats.rx_errors++; +free_skb: + dev_kfree_skb(skb); + return; } /* -- cgit v0.10.2 From 28e84ab3abafb0f9c9573993626abe6ca3fa8eb1 Mon Sep 17 00:00:00 2001 From: "Robert T. Johnson" Date: Mon, 16 Jun 2008 17:20:52 -0700 Subject: atm: [he] limit queries to the device's register space From: "Robert T. Johnson" Signed-off-by: Chas Williams diff --git a/drivers/atm/he.c b/drivers/atm/he.c index 320320e..fc636a3 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -2845,10 +2845,15 @@ he_ioctl(struct atm_dev *atm_dev, unsigned int cmd, void __user *arg) if (copy_from_user(®, arg, sizeof(struct he_ioctl_reg))) return -EFAULT; - + spin_lock_irqsave(&he_dev->global_lock, flags); switch (reg.type) { case HE_REGTYPE_PCI: + if (reg.addr < 0 || reg.addr >= HE_REGMAP_SIZE) { + err = -EINVAL; + break; + } + reg.val = he_readl(he_dev, reg.addr); break; case HE_REGTYPE_RCM: -- cgit v0.10.2 From 65c3e4715b1b934f8dcc002d9f46b4371ca7a9b1 Mon Sep 17 00:00:00 2001 From: Chas Williams Date: Mon, 16 Jun 2008 17:21:27 -0700 Subject: atm: [he] send idle cells instead of unassigned when in SDH mode Signed-off-by: Chas Williams Signed-off-by: David S. Miller diff --git a/drivers/atm/he.c b/drivers/atm/he.c index fc636a3..ea495b2 100644 --- a/drivers/atm/he.c +++ b/drivers/atm/he.c @@ -1555,6 +1555,7 @@ he_start(struct atm_dev *dev) val = he_phy_get(he_dev->atm_dev, SUNI_TPOP_APM); val = (val & ~SUNI_TPOP_APM_S) | (SUNI_TPOP_S_SDH << SUNI_TPOP_APM_S_SHIFT); he_phy_put(he_dev->atm_dev, val, SUNI_TPOP_APM); + he_phy_put(he_dev->atm_dev, SUNI_TACP_IUCHP_CLP, SUNI_TACP_IUCHP); } /* 5.1.12 enable transmit and receive */ -- cgit v0.10.2 From 95e904c7da715aa2dbfb595da66b63de37a0bb04 Mon Sep 17 00:00:00 2001 From: Rabin Vincent Date: Sun, 11 May 2008 05:55:33 +0530 Subject: sched: fix defined-but-unused warning Fix this warning, which appears with !CONFIG_SMP: kernel/sched.c:1216: warning: `init_hrtick' defined but not used Signed-off-by: Rabin Vincent Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index eaf6751..0422852 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -1127,6 +1127,7 @@ static enum hrtimer_restart hrtick(struct hrtimer *timer) return HRTIMER_NORESTART; } +#ifdef CONFIG_SMP static void hotplug_hrtick_disable(int cpu) { struct rq *rq = cpu_rq(cpu); @@ -1182,6 +1183,7 @@ static void init_hrtick(void) { hotcpu_notifier(hotplug_hrtick, 0); } +#endif /* CONFIG_SMP */ static void init_rq_hrtick(struct rq *rq) { -- cgit v0.10.2 From 2f6a77d56523c14651236bc401a99b0e2aca2fdd Mon Sep 17 00:00:00 2001 From: Jiri Kosina Date: Tue, 17 Jun 2008 11:47:27 -0400 Subject: Input: i8042 - retry failed CTR writes when resuming There are systems that fail in i8042_resume() with i8042: Can't write CTR to resume as i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR) fails even though the controller claimed itself to be ready before. One retry after failing write fixes the problems on the failing systems. Reported-by: Helmut Schaa Signed-off-by: Jiri Kosina Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/serio/i8042.c b/drivers/input/serio/i8042.c index 592ff55..170f71e 100644 --- a/drivers/input/serio/i8042.c +++ b/drivers/input/serio/i8042.c @@ -952,8 +952,12 @@ static int i8042_resume(struct platform_device *dev) i8042_ctr |= I8042_CTR_AUXDIS | I8042_CTR_KBDDIS; i8042_ctr &= ~(I8042_CTR_AUXINT | I8042_CTR_KBDINT); if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { - printk(KERN_ERR "i8042: Can't write CTR to resume\n"); - return -EIO; + printk(KERN_WARNING "i8042: Can't write CTR to resume, retrying...\n"); + msleep(50); + if (i8042_command(&i8042_ctr, I8042_CMD_CTL_WCTR)) { + printk(KERN_ERR "i8042: CTR write retry failed\n"); + return -EIO; + } } -- cgit v0.10.2 From 90d95ef617a535a8832bdcb8dee07bf591e5dd82 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 17 Jun 2008 11:56:55 -0400 Subject: Input: appletouch - implement reset-resume logic On some boxes the touchpad needs to be reinitialized after resume to make it function again. This fixes bugzilla #10825. Signed-off-by: Oliver Neukum Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c index 8dd3942..ce6fdec 100644 --- a/drivers/input/mouse/appletouch.c +++ b/drivers/input/mouse/appletouch.c @@ -589,6 +589,21 @@ static void atp_close(struct input_dev *input) dev->open = 0; } +static int atp_handle_geyser(struct atp *dev) +{ + struct usb_device *udev = dev->udev; + + if (!atp_is_fountain(dev)) { + /* switch to raw sensor mode */ + if (atp_geyser_init(udev)) + return -EIO; + + printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); + } + + return 0; +} + static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id) { struct atp *dev; @@ -633,14 +648,6 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id else dev->datalen = 81; - if (!atp_is_fountain(dev)) { - /* switch to raw sensor mode */ - if (atp_geyser_init(udev)) - goto err_free_devs; - - printk(KERN_INFO "appletouch: Geyser mode initialized.\n"); - } - dev->urb = usb_alloc_urb(0, GFP_KERNEL); if (!dev->urb) goto err_free_devs; @@ -654,6 +661,10 @@ static int atp_probe(struct usb_interface *iface, const struct usb_device_id *id usb_rcvintpipe(udev, int_in_endpointAddr), dev->data, dev->datalen, atp_complete, dev, 1); + error = atp_handle_geyser(dev); + if (error) + goto err_free_buffer; + usb_make_path(udev, dev->phys, sizeof(dev->phys)); strlcat(dev->phys, "/input0", sizeof(dev->phys)); @@ -744,6 +755,20 @@ static void atp_disconnect(struct usb_interface *iface) printk(KERN_INFO "input: appletouch disconnected\n"); } +static int atp_recover(struct atp *dev) +{ + int error; + + error = atp_handle_geyser(dev); + if (error) + return error; + + if (dev->open && usb_submit_urb(dev->urb, GFP_ATOMIC)) + return -EIO; + + return 0; +} + static int atp_suspend(struct usb_interface *iface, pm_message_t message) { struct atp *dev = usb_get_intfdata(iface); @@ -764,12 +789,20 @@ static int atp_resume(struct usb_interface *iface) return 0; } +static int atp_reset_resume(struct usb_interface *iface) +{ + struct atp *dev = usb_get_intfdata(iface); + + return atp_recover(dev); +} + static struct usb_driver atp_driver = { .name = "appletouch", .probe = atp_probe, .disconnect = atp_disconnect, .suspend = atp_suspend, .resume = atp_resume, + .reset_resume = atp_reset_resume, .id_table = atp_table, }; diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 2e20193..ec15f1d 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -47,6 +47,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* Edirol SD-20 */ { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME }, + /* appletouch */ + { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v0.10.2 From 58c2709c2b551704f289cb3442a41d2a0cf40b6e Mon Sep 17 00:00:00 2001 From: Thomas Mingarelli Date: Thu, 12 Jun 2008 20:20:32 +0000 Subject: Revert "[WATCHDOG] make watchdog/hpwdt.c:asminline_call() static" The driver needs the asmlinkage tag and the CFLAGS line in the Makefile. Without it the driver doesn't work. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 6a63535..2bc1f74 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -145,8 +145,8 @@ MODULE_DEVICE_TABLE(pci, hpwdt_devices); #define HPWDT_ARCH 32 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +asmlinkage void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushl %ebp \n\t" "movl %esp, %ebp \n\t" @@ -333,8 +333,8 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -static void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) +asmlinkage void asminline_call(struct cmn_registers *pi86Regs, + unsigned long *pRomEntry) { asm("pushq %rbp \n\t" "movq %rsp, %rbp \n\t" -- cgit v0.10.2 From 4dc7347a3b4a76705b7fd00b271847dd10cf5a32 Mon Sep 17 00:00:00 2001 From: Thomas Mingarelli Date: Thu, 12 Jun 2008 20:20:32 +0000 Subject: [WATCHDOG] hpwdt: Add CFLAGS to get driver working To get this driver working we need the CFLAGS_hpwdt.o += -O in the Makefile. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 25b352b..8662a6b 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -68,6 +68,7 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o +CFLAGS_hpwdt.o += -O obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o -- cgit v0.10.2 From 68b80f11380889996aa7eadba29dbbb5c29a5864 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 17 Jun 2008 15:51:47 -0700 Subject: netfilter: nf_nat: fix RCU races Fix three ct_extend/NAT extension related races: - When cleaning up the extension area and removing it from the bysource hash, the nat->ct pointer must not be set to NULL since it may still be used in a RCU read side - When replacing a NAT extension area in the bysource hash, the nat->ct pointer must be assigned before performing the replacement - When reallocating extension storage in ct_extend, the old memory must not be freed immediately since it may still be used by a RCU read side Possibly fixes https://bugzilla.redhat.com/show_bug.cgi?id=449315 and/or http://bugzilla.kernel.org/show_bug.cgi?id=10875 Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/net/netfilter/nf_conntrack_extend.h b/include/net/netfilter/nf_conntrack_extend.h index f736e84..f80c0ed 100644 --- a/include/net/netfilter/nf_conntrack_extend.h +++ b/include/net/netfilter/nf_conntrack_extend.h @@ -15,6 +15,7 @@ enum nf_ct_ext_id /* Extensions: optional stuff which isn't permanently in struct. */ struct nf_ct_ext { + struct rcu_head rcu; u8 offset[NF_CT_EXT_NUM]; u8 len; char data[0]; diff --git a/net/ipv4/netfilter/nf_nat_core.c b/net/ipv4/netfilter/nf_nat_core.c index 0457859..d2a887f 100644 --- a/net/ipv4/netfilter/nf_nat_core.c +++ b/net/ipv4/netfilter/nf_nat_core.c @@ -556,7 +556,6 @@ static void nf_nat_cleanup_conntrack(struct nf_conn *ct) spin_lock_bh(&nf_nat_lock); hlist_del_rcu(&nat->bysource); - nat->ct = NULL; spin_unlock_bh(&nf_nat_lock); } @@ -570,8 +569,8 @@ static void nf_nat_move_storage(void *new, void *old) return; spin_lock_bh(&nf_nat_lock); - hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource); new_nat->ct = ct; + hlist_replace_rcu(&old_nat->bysource, &new_nat->bysource); spin_unlock_bh(&nf_nat_lock); } diff --git a/net/netfilter/nf_conntrack_extend.c b/net/netfilter/nf_conntrack_extend.c index bcc19fa..8a3f8b3 100644 --- a/net/netfilter/nf_conntrack_extend.c +++ b/net/netfilter/nf_conntrack_extend.c @@ -59,12 +59,19 @@ nf_ct_ext_create(struct nf_ct_ext **ext, enum nf_ct_ext_id id, gfp_t gfp) if (!*ext) return NULL; + INIT_RCU_HEAD(&(*ext)->rcu); (*ext)->offset[id] = off; (*ext)->len = len; return (void *)(*ext) + off; } +static void __nf_ct_ext_free_rcu(struct rcu_head *head) +{ + struct nf_ct_ext *ext = container_of(head, struct nf_ct_ext, rcu); + kfree(ext); +} + void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp) { struct nf_ct_ext *new; @@ -106,7 +113,7 @@ void *__nf_ct_ext_add(struct nf_conn *ct, enum nf_ct_ext_id id, gfp_t gfp) (void *)ct->ext + ct->ext->offset[i]); rcu_read_unlock(); } - kfree(ct->ext); + call_rcu(&ct->ext->rcu, __nf_ct_ext_free_rcu); ct->ext = new; } -- cgit v0.10.2 From 8a548868db62422113104ebc658065e3fe976951 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 17 Jun 2008 15:52:07 -0700 Subject: netfilter: nf_conntrack_h323: fix memory leak in module initialization error path Properly free h323_buffer when helper registration fails. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index 95da1a2..99e385d 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -1799,6 +1799,7 @@ err3: err2: nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]); err1: + kfree(h323_buffer); return ret; } -- cgit v0.10.2 From a56b8f81580761c65e4d8d0c04ac1cb7a788bdf1 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 17 Jun 2008 15:52:32 -0700 Subject: netfilter: nf_conntrack_h323: fix module unload crash The H.245 helper is not registered/unregistered, but assigned to connections manually from the Q.931 helper. This means on unload existing expectations and connections using the helper are not cleaned up, leading to the following oops on module unload: CPU 0 Unable to handle kernel paging request at virtual address c00a6828, epc == 802224dc, ra == 801d4e7c Oops[#1]: Cpu 0 $ 0 : 00000000 00000000 00000004 c00a67f0 $ 4 : 802a5ad0 81657e00 00000000 00000000 $ 8 : 00000008 801461c8 00000000 80570050 $12 : 819b0280 819b04b0 00000006 00000000 $16 : 802a5a60 80000000 80b46000 80321010 $20 : 00000000 00000004 802a5ad0 00000001 $24 : 00000000 802257a8 $28 : 802a4000 802a59e8 00000004 801d4e7c Hi : 0000000b Lo : 00506320 epc : 802224dc ip_conntrack_help+0x38/0x74 Tainted: P ra : 801d4e7c nf_iterate+0xbc/0x130 Status: 1000f403 KERNEL EXL IE Cause : 00800008 BadVA : c00a6828 PrId : 00019374 Modules linked in: ip_nat_pptp ip_conntrack_pptp ath_pktlog wlan_acl wlan_wep wlan_tkip wlan_ccmp wlan_xauth ath_pci ath_dev ath_dfs ath_rate_atheros wlan ath_hal ip_nat_tftp ip_conntrack_tftp ip_nat_ftp ip_conntrack_ftp pppoe ppp_async ppp_deflate ppp_mppe pppox ppp_generic slhc Process swapper (pid: 0, threadinfo=802a4000, task=802a6000) Stack : 801e7d98 00000004 802a5a60 80000000 801d4e7c 801d4e7c 802a5ad0 00000004 00000000 00000000 801e7d98 00000000 00000004 802a5ad0 00000000 00000010 801e7d98 80b46000 802a5a60 80320000 80000000 801d4f8c 802a5b00 00000002 80063834 00000000 80b46000 802a5a60 801e7d98 80000000 802ba854 00000000 81a02180 80b7e260 81a021b0 819b0000 819b0000 80570056 00000000 00000001 ... Call Trace: [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4e7c>] nf_iterate+0xbc/0x130 [<801d4e7c>] nf_iterate+0xbc/0x130 [<801e7d98>] ip_finish_output+0x0/0x23c [<801e7d98>] ip_finish_output+0x0/0x23c [<801d4f8c>] nf_hook_slow+0x9c/0x1a4 One way to fix this would be to split helper cleanup from the unregistration function and invoke it for the H.245 helper, but since ctnetlink needs to be able to find the helper for synchonization purposes, a better fix is to register it normally and make sure its not assigned to connections during helper lookup. The missing l3num initialization is enough for this, this patch changes it to use AF_UNSPEC to make it more explicit though. Reported-by: liannan Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_h323_main.c b/net/netfilter/nf_conntrack_h323_main.c index 99e385d..2f83c15 100644 --- a/net/netfilter/nf_conntrack_h323_main.c +++ b/net/netfilter/nf_conntrack_h323_main.c @@ -619,6 +619,7 @@ static const struct nf_conntrack_expect_policy h245_exp_policy = { static struct nf_conntrack_helper nf_conntrack_helper_h245 __read_mostly = { .name = "H.245", .me = THIS_MODULE, + .tuple.src.l3num = AF_UNSPEC, .tuple.dst.protonum = IPPROTO_UDP, .help = h245_help, .expect_policy = &h245_exp_policy, @@ -1765,6 +1766,7 @@ static void __exit nf_conntrack_h323_fini(void) nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]); nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]); nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]); + nf_conntrack_helper_unregister(&nf_conntrack_helper_h245); kfree(h323_buffer); pr_debug("nf_ct_h323: fini\n"); } @@ -1777,27 +1779,32 @@ static int __init nf_conntrack_h323_init(void) h323_buffer = kmalloc(65536, GFP_KERNEL); if (!h323_buffer) return -ENOMEM; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_h245); if (ret < 0) goto err1; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[0]); if (ret < 0) goto err2; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_q931[1]); if (ret < 0) goto err3; - ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]); + ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[0]); if (ret < 0) goto err4; + ret = nf_conntrack_helper_register(&nf_conntrack_helper_ras[1]); + if (ret < 0) + goto err5; pr_debug("nf_ct_h323: init success\n"); return 0; -err4: +err5: nf_conntrack_helper_unregister(&nf_conntrack_helper_ras[0]); -err3: +err4: nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[1]); -err2: +err3: nf_conntrack_helper_unregister(&nf_conntrack_helper_q931[0]); +err2: + nf_conntrack_helper_unregister(&nf_conntrack_helper_h245); err1: kfree(h323_buffer); return ret; -- cgit v0.10.2 From fe833fca2eac6b3d3ad5e35f44ad4638362f1da8 Mon Sep 17 00:00:00 2001 From: Steffen Klassert Date: Tue, 17 Jun 2008 16:37:13 -0700 Subject: xfrm: fix fragmentation for ipv4 xfrm tunnel When generating the ip header for the transformed packet we just copy the frag_off field of the ip header from the original packet to the ip header of the new generated packet. If we receive a packet as a chain of fragments, all but the last of the new generated packets have the IP_MF flag set. We have to mask the frag_off field to only keep the IP_DF flag from the original packet. This got lost with git commit 36cf9acf93e8561d9faec24849e57688a81eb9c5 ("[IPSEC]: Separate inner/outer mode processing on output") Signed-off-by: Steffen Klassert Acked-by: Herbert Xu Signed-off-by: David S. Miller diff --git a/net/ipv4/xfrm4_mode_tunnel.c b/net/ipv4/xfrm4_mode_tunnel.c index 584e6d7..7135279 100644 --- a/net/ipv4/xfrm4_mode_tunnel.c +++ b/net/ipv4/xfrm4_mode_tunnel.c @@ -52,7 +52,7 @@ static int xfrm4_mode_tunnel_output(struct xfrm_state *x, struct sk_buff *skb) IP_ECN_clear(top_iph); top_iph->frag_off = (flags & XFRM_STATE_NOPMTUDISC) ? - 0 : XFRM_MODE_SKB_CB(skb)->frag_off; + 0 : (XFRM_MODE_SKB_CB(skb)->frag_off & htons(IP_DF)); ip_select_ident(top_iph, dst->child, NULL); top_iph->ttl = dst_metric(dst->child, RTAX_HOPLIMIT); -- cgit v0.10.2 From 42a886af728c089df8da1b0017b0e7e6c81b5335 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 17 Jun 2008 17:47:50 -0700 Subject: x86-64: Fix "bytes left to copy" return value for copy_from_user() Most users by far do not care about the exact return value (they only really care about whether the copy succeeded in its entirety or not), but a few special core routines actually care deeply about exactly how many bytes were copied from user space. And the unrolled versions of the x86-64 user copy routines would sometimes report that it had copied more bytes than it actually had. Very few uses actually have partial copies to begin with, but to make this bug even harder to trigger, most x86 CPU's use the "rep string" instructions for normal user copies, and that version didn't have this issue. To make it even harder to hit, the one user of this that really cared about the return value (and used the uncached version of the copy that doesn't use the "rep string" instructions) was the generic write routine, which pre-populated its source, once more hiding the problem by avoiding the exception case that triggers the bug. In other words, very special thanks to Bron Gondwana who not only triggered this, but created a test-program to show it, and bisected the behavior down to commit 08291429cfa6258c4cd95d8833beb40f828b194e ("mm: fix pagecache write deadlocks") which changed the access pattern just enough that you can now trigger it with 'writev()' with multiple iovec's. That commit itself was not the cause of the bug, it just allowed all the stars to align just right that you could trigger the problem. [ Side note: this is just the minimal fix to make the copy routines (with __copy_from_user_inatomic_nocache as the particular version that was involved in showing this) have the right return values. We really should improve on the exceptional case further - to make the copy do a byte-accurate copy up to the exact page limit that causes it to fail. As it is, the callers have to do extra work to handle the limit case gracefully. ] Reported-by: Bron Gondwana Cc: Nick Piggin Cc: Andrew Morton Cc: Andi Kleen Cc: Al Viro Signed-off-by: Linus Torvalds (which didn't have this problem), and since most users that do the carethis was very hard to trigger, but diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S index 70bebd3..ee1c3f6 100644 --- a/arch/x86/lib/copy_user_64.S +++ b/arch/x86/lib/copy_user_64.S @@ -217,19 +217,19 @@ ENTRY(copy_user_generic_unrolled) /* table sorted by exception address */ .section __ex_table,"a" .align 8 - .quad .Ls1,.Ls1e - .quad .Ls2,.Ls2e - .quad .Ls3,.Ls3e - .quad .Ls4,.Ls4e - .quad .Ld1,.Ls1e + .quad .Ls1,.Ls1e /* Ls1-Ls4 have copied zero bytes */ + .quad .Ls2,.Ls1e + .quad .Ls3,.Ls1e + .quad .Ls4,.Ls1e + .quad .Ld1,.Ls1e /* Ld1-Ld4 have copied 0-24 bytes */ .quad .Ld2,.Ls2e .quad .Ld3,.Ls3e .quad .Ld4,.Ls4e - .quad .Ls5,.Ls5e - .quad .Ls6,.Ls6e - .quad .Ls7,.Ls7e - .quad .Ls8,.Ls8e - .quad .Ld5,.Ls5e + .quad .Ls5,.Ls5e /* Ls5-Ls8 have copied 32 bytes */ + .quad .Ls6,.Ls5e + .quad .Ls7,.Ls5e + .quad .Ls8,.Ls5e + .quad .Ld5,.Ls5e /* Ld5-Ld8 have copied 32-56 bytes */ .quad .Ld6,.Ls6e .quad .Ld7,.Ls7e .quad .Ld8,.Ls8e @@ -244,11 +244,8 @@ ENTRY(copy_user_generic_unrolled) .quad .Le5,.Le_zero .previous - /* compute 64-offset for main loop. 8 bytes accuracy with error on the - pessimistic side. this is gross. it would be better to fix the - interface. */ /* eax: zero, ebx: 64 */ -.Ls1e: addl $8,%eax +.Ls1e: addl $8,%eax /* eax is bytes left uncopied within the loop (Ls1e: 64 .. Ls8e: 8) */ .Ls2e: addl $8,%eax .Ls3e: addl $8,%eax .Ls4e: addl $8,%eax diff --git a/arch/x86/lib/copy_user_nocache_64.S b/arch/x86/lib/copy_user_nocache_64.S index 5196762..9d3d1ab 100644 --- a/arch/x86/lib/copy_user_nocache_64.S +++ b/arch/x86/lib/copy_user_nocache_64.S @@ -145,19 +145,19 @@ ENTRY(__copy_user_nocache) /* table sorted by exception address */ .section __ex_table,"a" .align 8 - .quad .Ls1,.Ls1e - .quad .Ls2,.Ls2e - .quad .Ls3,.Ls3e - .quad .Ls4,.Ls4e - .quad .Ld1,.Ls1e + .quad .Ls1,.Ls1e /* .Ls[1-4] - 0 bytes copied */ + .quad .Ls2,.Ls1e + .quad .Ls3,.Ls1e + .quad .Ls4,.Ls1e + .quad .Ld1,.Ls1e /* .Ld[1-4] - 0..24 bytes coped */ .quad .Ld2,.Ls2e .quad .Ld3,.Ls3e .quad .Ld4,.Ls4e - .quad .Ls5,.Ls5e - .quad .Ls6,.Ls6e - .quad .Ls7,.Ls7e - .quad .Ls8,.Ls8e - .quad .Ld5,.Ls5e + .quad .Ls5,.Ls5e /* .Ls[5-8] - 32 bytes copied */ + .quad .Ls6,.Ls5e + .quad .Ls7,.Ls5e + .quad .Ls8,.Ls5e + .quad .Ld5,.Ls5e /* .Ld[5-8] - 32..56 bytes copied */ .quad .Ld6,.Ls6e .quad .Ld7,.Ls7e .quad .Ld8,.Ls8e @@ -172,11 +172,8 @@ ENTRY(__copy_user_nocache) .quad .Le5,.Le_zero .previous - /* compute 64-offset for main loop. 8 bytes accuracy with error on the - pessimistic side. this is gross. it would be better to fix the - interface. */ /* eax: zero, ebx: 64 */ -.Ls1e: addl $8,%eax +.Ls1e: addl $8,%eax /* eax: bytes left uncopied: Ls1e: 64 .. Ls8e: 8 */ .Ls2e: addl $8,%eax .Ls3e: addl $8,%eax .Ls4e: addl $8,%eax -- cgit v0.10.2 From cd50e89244087432a70598e432ff199a009b0e73 Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Sun, 15 Jun 2008 18:05:01 +0300 Subject: Unignore vmlinux.lds.h from Git. Added !vmlinux.lds.h to .gitignore because it would otherwise be ignored. Signed-off-by: Eduard - Gabriel Munteanu Acked-by: Mathieu Desnoyers Signed-off-by: Linus Torvalds diff --git a/.gitignore b/.gitignore index d24ad50..9bb1cb6 100644 --- a/.gitignore +++ b/.gitignore @@ -26,6 +26,7 @@ tags TAGS vmlinux* !vmlinux.lds.S +!vmlinux.lds.h System.map Module.markers Module.symvers -- cgit v0.10.2 From f948d56435fc1f7506f08866302ecd6e60b533dd Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 17 Jun 2008 18:05:40 +0200 Subject: fuse: fix thinko in max I/O size calucation Use max not min to enforce a lower limit on the max I/O size. This bug was introduced by "fuse: fix max i/o size calculation" (commit e5d9a0df07484d6d191756878c974e4307fb24ce). Thanks to Brian Wang for noticing. Reported-by: Brian Wang Signed-off-by: Miklos Szeredi Acked-by: Szabolcs Szakacsits Signed-off-by: Linus Torvalds diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 43e9951..3141690 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -591,7 +591,7 @@ static void process_init_reply(struct fuse_conn *fc, struct fuse_req *req) fc->bdi.ra_pages = min(fc->bdi.ra_pages, ra_pages); fc->minor = arg->minor; fc->max_write = arg->minor < 5 ? 4096 : arg->max_write; - fc->max_write = min_t(unsigned, 4096, fc->max_write); + fc->max_write = max_t(unsigned, 4096, fc->max_write); fc->conn_init = 1; } fuse_put_request(fc, req); @@ -667,7 +667,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) fc->flags = d.flags; fc->user_id = d.user_id; fc->group_id = d.group_id; - fc->max_read = min_t(unsigned, 4096, d.max_read); + fc->max_read = max_t(unsigned, 4096, d.max_read); /* Used by get_root_inode() */ sb->s_fs_info = fc; -- cgit v0.10.2 From 8b8091fbf4d8791ad70b146ba2c892c62c2cdc6b Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Tue, 17 Jun 2008 19:27:55 -0400 Subject: ibm_newemac: select CRC32 in Kconfig The ibm_newemac driver requires ether_crc to be defined. Apparently it is possible to generate a .config without CONFIG_CRC32 set which causes the following link errors if IBM_NEW_EMAC is selected: LD .tmp_vmlinux1 drivers/built-in.o: In function `emac_hash_mc': core.c:(.text+0x2f524): undefined reference to `crc32_le' core.c:(.text+0x2f528): undefined reference to `bitrev32' make: *** [.tmp_vmlinux1] Error 1 This patch has IBM_NEW_EMAC select CRC32 so we don't hit this error. Signed-off-by: Josh Boyer Signed-off-by: Jeff Garzik diff --git a/drivers/net/ibm_newemac/Kconfig b/drivers/net/ibm_newemac/Kconfig index 0d3e738..70a3272 100644 --- a/drivers/net/ibm_newemac/Kconfig +++ b/drivers/net/ibm_newemac/Kconfig @@ -1,6 +1,7 @@ config IBM_NEW_EMAC tristate "IBM EMAC Ethernet support" depends on PPC_DCR && PPC_MERGE + select CRC32 help This driver supports the IBM EMAC family of Ethernet controllers typically found on 4xx embedded PowerPC chips, but also on the -- cgit v0.10.2 From dc515f2e0b356981ea0c4581ff0e587aea8b624a Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:43 -0700 Subject: netxen: fix portnum for hp mezz cards This fixes a the issue where logical port number is set incorrectly for HP blade mezz cards. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 7144c25..5a2fd21 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -530,9 +530,15 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) netxen_initialize_adapter_sw(adapter); /* initialize the buffers in adapter */ /* Mezz cards have PCI function 0,2,3 enabled */ - if ((adapter->ahw.boardcfg.board_type == NETXEN_BRDTYPE_P2_SB31_10G_IMEZ) - && (pci_func_id >= 2)) + switch (adapter->ahw.boardcfg.board_type) { + case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ: + case NETXEN_BRDTYPE_P2_SB31_10G_HMEZ: + if (pci_func_id >= 2) adapter->portnum = pci_func_id - 2; + break; + default: + break; + } #ifdef CONFIG_IA64 if(adapter->portnum == 0) { -- cgit v0.10.2 From 3276fbad8385d8e86d85fad4d86dae669a045c65 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:44 -0700 Subject: netxen: remove global physical_port array Store physical port number in netxen_adapter structure. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index 8cb29f5..ec2ed89 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -863,6 +863,7 @@ struct netxen_adapter { unsigned char mac_addr[ETH_ALEN]; int mtu; int portnum; + u8 physical_port; struct work_struct watchdog_task; struct timer_list watchdog_timer; @@ -1169,5 +1170,4 @@ extern int netxen_rom_fast_read(struct netxen_adapter *adapter, int addr, extern struct ethtool_ops netxen_nic_ethtool_ops; -extern int physical_port[]; /* physical port # from virtual port.*/ #endif /* __NETXEN_NIC_H_ */ diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index 6e98d83..723487b 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -369,7 +369,7 @@ netxen_nic_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *p) for (i = 3; niu_registers[mode].reg[i - 3] != -1; i++) { /* GB: port specific registers */ if (mode == 0 && i >= 19) - window = physical_port[adapter->portnum] * + window = adapter->physical_port * NETXEN_NIC_PORT_WINDOW; NETXEN_NIC_LOCKED_READ_REG(niu_registers[mode]. @@ -527,7 +527,7 @@ netxen_nic_get_pauseparam(struct net_device *dev, { struct netxen_adapter *adapter = netdev_priv(dev); __u32 val; - int port = physical_port[adapter->portnum]; + int port = adapter->physical_port; if (adapter->ahw.board_type == NETXEN_NIC_GBE) { if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) @@ -573,7 +573,7 @@ netxen_nic_set_pauseparam(struct net_device *dev, { struct netxen_adapter *adapter = netdev_priv(dev); __u32 val; - int port = physical_port[adapter->portnum]; + int port = adapter->physical_port; /* read mode */ if (adapter->ahw.board_type == NETXEN_NIC_GBE) { if ((port < 0) || (port > NETXEN_NIU_MAX_GBE_PORTS)) diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index af73564..30316a847d 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -1032,15 +1032,15 @@ int netxen_nic_get_board_info(struct netxen_adapter *adapter) int netxen_nic_set_mtu_gb(struct netxen_adapter *adapter, int new_mtu) { netxen_nic_write_w0(adapter, - NETXEN_NIU_GB_MAX_FRAME_SIZE( - physical_port[adapter->portnum]), new_mtu); + NETXEN_NIU_GB_MAX_FRAME_SIZE(adapter->physical_port), + new_mtu); return 0; } int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) { new_mtu += NETXEN_NIU_HDRSIZE + NETXEN_NIU_TLRSIZE; - if (physical_port[adapter->portnum] == 0) + if (adapter->physical_port == 0) netxen_nic_write_w0(adapter, NETXEN_NIU_XGE_MAX_FRAME_SIZE, new_mtu); else @@ -1051,7 +1051,7 @@ int netxen_nic_set_mtu_xgb(struct netxen_adapter *adapter, int new_mtu) void netxen_nic_init_niu_gb(struct netxen_adapter *adapter) { - netxen_niu_gbe_init_port(adapter, physical_port[adapter->portnum]); + netxen_niu_gbe_init_port(adapter, adapter->physical_port); } void diff --git a/drivers/net/netxen/netxen_nic_isr.c b/drivers/net/netxen/netxen_nic_isr.c index f487615..96cec41 100644 --- a/drivers/net/netxen/netxen_nic_isr.c +++ b/drivers/net/netxen/netxen_nic_isr.c @@ -145,7 +145,7 @@ static void netxen_nic_isr_other(struct netxen_adapter *adapter) /* verify the offset */ val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); - val = val >> physical_port[adapter->portnum]; + val = val >> adapter->physical_port; if (val == adapter->ahw.qg_linksup) return; @@ -199,7 +199,7 @@ void netxen_nic_xgbe_handle_phy_intr(struct netxen_adapter *adapter) /* WINDOW = 1 */ val = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_XG_STATE)); - val >>= (physical_port[adapter->portnum] * 8); + val >>= (adapter->physical_port * 8); val &= 0xff; if (adapter->ahw.xg_linkup == 1 && val != XG_LINK_UP) { diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 5a2fd21..f903de0 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -70,8 +70,6 @@ static void netxen_nic_poll_controller(struct net_device *netdev); static irqreturn_t netxen_intr(int irq, void *data); static irqreturn_t netxen_msi_intr(int irq, void *data); -int physical_port[] = {0, 1, 2, 3}; - /* PCI Device ID Table */ static struct pci_device_id netxen_pci_tbl[] __devinitdata = { {PCI_DEVICE(0x4040, 0x0001)}, @@ -647,7 +645,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum))); if (i != 0x55555555) - physical_port[adapter->portnum] = i; + adapter->physical_port = i; netif_carrier_off(netdev); netif_stop_queue(netdev); diff --git a/drivers/net/netxen/netxen_nic_niu.c b/drivers/net/netxen/netxen_nic_niu.c index 1c852a7..a3bc7cc 100644 --- a/drivers/net/netxen/netxen_nic_niu.c +++ b/drivers/net/netxen/netxen_nic_niu.c @@ -94,7 +94,7 @@ int netxen_niu_gbe_phy_read(struct netxen_adapter *adapter, long reg, long timeout = 0; long result = 0; long restore = 0; - long phy = physical_port[adapter->portnum]; + long phy = adapter->physical_port; __u32 address; __u32 command; __u32 status; @@ -190,7 +190,7 @@ int netxen_niu_gbe_phy_write(struct netxen_adapter *adapter, long reg, long timeout = 0; long result = 0; long restore = 0; - long phy = physical_port[adapter->portnum]; + long phy = adapter->physical_port; __u32 address; __u32 command; __u32 status; @@ -456,7 +456,7 @@ int netxen_niu_gbe_init_port(struct netxen_adapter *adapter, int port) int netxen_niu_xg_init_port(struct netxen_adapter *adapter, int port) { - u32 portnum = physical_port[adapter->portnum]; + u32 portnum = adapter->physical_port; netxen_crb_writelit_adapter(adapter, NETXEN_NIU_XGE_CONFIG_1+(0x10000*portnum), 0x1447); @@ -573,7 +573,7 @@ static int netxen_niu_macaddr_get(struct netxen_adapter *adapter, { u32 stationhigh; u32 stationlow; - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u8 val[8]; if (addr == NULL) @@ -604,7 +604,7 @@ int netxen_niu_macaddr_set(struct netxen_adapter *adapter, { u8 temp[4]; u32 val; - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; unsigned char mac_addr[6]; int i; DECLARE_MAC_BUF(mac); @@ -724,7 +724,7 @@ int netxen_niu_enable_gbe_port(struct netxen_adapter *adapter, int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) { __u32 mac_cfg0; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; @@ -740,7 +740,7 @@ int netxen_niu_disable_gbe_port(struct netxen_adapter *adapter) int netxen_niu_disable_xg_port(struct netxen_adapter *adapter) { __u32 mac_cfg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; @@ -757,7 +757,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, netxen_niu_prom_mode_t mode) { __u32 reg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_GBE_PORTS) return -EINVAL; @@ -814,7 +814,7 @@ int netxen_niu_set_promiscuous_mode(struct netxen_adapter *adapter, int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, netxen_ethernet_macaddr_t addr) { - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u8 temp[4]; u32 val; @@ -867,7 +867,7 @@ int netxen_niu_xg_macaddr_set(struct netxen_adapter *adapter, int netxen_niu_xg_macaddr_get(struct netxen_adapter *adapter, netxen_ethernet_macaddr_t * addr) { - int phy = physical_port[adapter->portnum]; + int phy = adapter->physical_port; u32 stationhigh; u32 stationlow; u8 val[8]; @@ -896,7 +896,7 @@ int netxen_niu_xg_set_promiscuous_mode(struct netxen_adapter *adapter, netxen_niu_prom_mode_t mode) { __u32 reg; - u32 port = physical_port[adapter->portnum]; + u32 port = adapter->physical_port; if (port > NETXEN_NIU_MAX_XG_PORTS) return -EINVAL; -- cgit v0.10.2 From dcd56fdbaeae1008044687b973c4a3e852e8a726 Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:45 -0700 Subject: netxen: cleanup debug messages o Remove unnecessary debug prints and functions. o Explicitly specify pci class (0x020000) to avoid enabling management function. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index ec2ed89..da4c4fb 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -776,7 +776,6 @@ struct netxen_hardware_context { u8 revision_id; u16 board_type; - u16 max_ports; struct netxen_board_info boardcfg; u32 xg_linkup; u32 qg_linksup; @@ -1035,7 +1034,6 @@ int netxen_rom_se(struct netxen_adapter *adapter, int addr); /* Functions from netxen_nic_isr.c */ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter); -void netxen_initialize_adapter_hw(struct netxen_adapter *adapter); void *netxen_alloc(struct pci_dev *pdev, size_t sz, dma_addr_t * ptr, struct pci_dev **used_dev); void netxen_initialize_adapter_ops(struct netxen_adapter *adapter); @@ -1078,20 +1076,6 @@ static const struct netxen_brdinfo netxen_boards[] = { #define NUM_SUPPORTED_BOARDS ARRAY_SIZE(netxen_boards) -static inline void get_brd_port_by_type(u32 type, int *ports) -{ - int i, found = 0; - for (i = 0; i < NUM_SUPPORTED_BOARDS; ++i) { - if (netxen_boards[i].brdtype == type) { - *ports = netxen_boards[i].ports; - found = 1; - break; - } - } - if (!found) - *ports = 0; -} - static inline void get_brd_name_by_type(u32 type, char *name) { int i, found = 0; diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c index 30316a847d..c43d06b 100644 --- a/drivers/net/netxen/netxen_nic_hw.c +++ b/drivers/net/netxen/netxen_nic_hw.c @@ -396,11 +396,8 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) } adapter->intr_scheme = readl( NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_CAPABILITIES_FW)); - printk(KERN_NOTICE "%s: FW capabilities:0x%x\n", netxen_nic_driver_name, - adapter->intr_scheme); adapter->msi_mode = readl( NETXEN_CRB_NORMALIZE(adapter, CRB_NIC_MSI_MODE_FW)); - DPRINTK(INFO, "Receive Peg ready too. starting stuff\n"); addr = netxen_alloc(adapter->ahw.pdev, sizeof(struct netxen_ring_ctx) + @@ -408,8 +405,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) (dma_addr_t *) & adapter->ctx_desc_phys_addr, &adapter->ctx_desc_pdev); - printk(KERN_INFO "ctx_desc_phys_addr: 0x%llx\n", - (unsigned long long) adapter->ctx_desc_phys_addr); if (addr == NULL) { DPRINTK(ERR, "bad return from pci_alloc_consistent\n"); err = -ENOMEM; @@ -429,8 +424,6 @@ int netxen_nic_hw_resources(struct netxen_adapter *adapter) adapter->max_tx_desc_count, (dma_addr_t *) & hw->cmd_desc_phys_addr, &adapter->ahw.cmd_desc_pdev); - printk(KERN_INFO "cmd_desc_phys_addr: 0x%llx\n", - (unsigned long long) hw->cmd_desc_phys_addr); if (addr == NULL) { DPRINTK(ERR, "bad return from pci_alloc_consistent\n"); @@ -1127,7 +1120,6 @@ void netxen_nic_set_link_parameters(struct netxen_adapter *adapter) void netxen_nic_flash_print(struct netxen_adapter *adapter) { - int valid = 1; u32 fw_major = 0; u32 fw_minor = 0; u32 fw_build = 0; @@ -1137,70 +1129,62 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter) __le32 *ptr32; struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); - if (board_info->magic != NETXEN_BDINFO_MAGIC) { - printk - ("NetXen Unknown board config, Read 0x%x expected as 0x%x\n", - board_info->magic, NETXEN_BDINFO_MAGIC); - valid = 0; - } - if (board_info->header_version != NETXEN_BDINFO_VERSION) { - printk("NetXen Unknown board config version." - " Read %x, expected %x\n", - board_info->header_version, NETXEN_BDINFO_VERSION); - valid = 0; - } - if (valid) { - ptr32 = (u32 *)&serial_num; - addr = NETXEN_USER_START + - offsetof(struct netxen_new_user_info, serial_num); - for (i = 0; i < 8; i++) { - if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { - printk("%s: ERROR reading %s board userarea.\n", - netxen_nic_driver_name, - netxen_nic_driver_name); - return; - } - ptr32++; - addr += sizeof(u32); + + adapter->driver_mismatch = 0; + + ptr32 = (u32 *)&serial_num; + addr = NETXEN_USER_START + + offsetof(struct netxen_new_user_info, serial_num); + for (i = 0; i < 8; i++) { + if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) { + printk("%s: ERROR reading %s board userarea.\n", + netxen_nic_driver_name, + netxen_nic_driver_name); + adapter->driver_mismatch = 1; + return; } + ptr32++; + addr += sizeof(u32); + } + + fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MAJOR)); + fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, + NETXEN_FW_VERSION_MINOR)); + fw_build = + readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); + if (adapter->portnum == 0) { get_brd_name_by_type(board_info->board_type, brd_name); printk("NetXen %s Board S/N %s Chip id 0x%x\n", - brd_name, serial_num, board_info->chip_id); - - printk("NetXen %s Board #%d, Chip id 0x%x\n", - board_info->board_type == 0x0b ? "XGB" : "GBE", - board_info->board_num, board_info->chip_id); - fw_major = readl(NETXEN_CRB_NORMALIZE(adapter, - NETXEN_FW_VERSION_MAJOR)); - fw_minor = readl(NETXEN_CRB_NORMALIZE(adapter, - NETXEN_FW_VERSION_MINOR)); - fw_build = - readl(NETXEN_CRB_NORMALIZE(adapter, NETXEN_FW_VERSION_SUB)); - - printk("NetXen Firmware version %d.%d.%d\n", fw_major, fw_minor, - fw_build); + brd_name, serial_num, board_info->chip_id); + printk("NetXen Firmware version %d.%d.%d\n", fw_major, + fw_minor, fw_build); } + if (fw_major != _NETXEN_NIC_LINUX_MAJOR) { - printk(KERN_ERR "The mismatch in driver version and firmware " - "version major number\n" - "Driver version major number = %d \t" - "Firmware version major number = %d \n", - _NETXEN_NIC_LINUX_MAJOR, fw_major); adapter->driver_mismatch = 1; } if (fw_minor != _NETXEN_NIC_LINUX_MINOR && fw_minor != (_NETXEN_NIC_LINUX_MINOR + 1)) { - printk(KERN_ERR "The mismatch in driver version and firmware " - "version minor number\n" - "Driver version minor number = %d \t" - "Firmware version minor number = %d \n", - _NETXEN_NIC_LINUX_MINOR, fw_minor); adapter->driver_mismatch = 1; } - if (adapter->driver_mismatch) - printk(KERN_INFO "Use the driver with version no %d.%d.xxx\n", - fw_major, fw_minor); + if (adapter->driver_mismatch) { + printk(KERN_ERR "%s: driver and firmware version mismatch\n", + adapter->netdev->name); + return; + } + + switch (adapter->ahw.board_type) { + case NETXEN_NIC_GBE: + dev_info(&adapter->pdev->dev, "%s: GbE port initialized\n", + adapter->netdev->name); + break; + case NETXEN_NIC_XGBE: + dev_info(&adapter->pdev->dev, "%s: XGbE port initialized\n", + adapter->netdev->name); + break; + } } diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index 45fa33e..f6aeccf 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -203,21 +203,6 @@ void netxen_initialize_adapter_sw(struct netxen_adapter *adapter) } } -void netxen_initialize_adapter_hw(struct netxen_adapter *adapter) -{ - int ports = 0; - struct netxen_board_info *board_info = &(adapter->ahw.boardcfg); - - if (netxen_nic_get_board_info(adapter) != 0) - printk("%s: Error getting board config info.\n", - netxen_nic_driver_name); - get_brd_port_by_type(board_info->board_type, &ports); - if (ports == 0) - printk(KERN_ERR "%s: Unknown board type\n", - netxen_nic_driver_name); - adapter->ahw.max_ports = ports; -} - void netxen_initialize_adapter_ops(struct netxen_adapter *adapter) { switch (adapter->ahw.board_type) { @@ -765,18 +750,13 @@ int netxen_flash_unlock(struct netxen_adapter *adapter) int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) { - int addr, val, status; + int addr, val; int n, i; int init_delay = 0; struct crb_addr_pair *buf; u32 off; /* resetall */ - status = netxen_nic_get_board_info(adapter); - if (status) - printk("%s: netxen_pinit_from_rom: Error getting board info\n", - netxen_nic_driver_name); - netxen_crb_writelit_adapter(adapter, NETXEN_ROMUSB_GLB_SW_RESET, NETXEN_ROMBUS_RESET); diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index f903de0..755f4ab 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -72,13 +72,13 @@ static irqreturn_t netxen_msi_intr(int irq, void *data); /* PCI Device ID Table */ static struct pci_device_id netxen_pci_tbl[] __devinitdata = { - {PCI_DEVICE(0x4040, 0x0001)}, - {PCI_DEVICE(0x4040, 0x0002)}, - {PCI_DEVICE(0x4040, 0x0003)}, - {PCI_DEVICE(0x4040, 0x0004)}, - {PCI_DEVICE(0x4040, 0x0005)}, - {PCI_DEVICE(0x4040, 0x0024)}, - {PCI_DEVICE(0x4040, 0x0025)}, + {PCI_DEVICE(0x4040, 0x0001), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0002), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0003), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0004), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0005), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0024), PCI_DEVICE_CLASS(0x020000, ~0)}, + {PCI_DEVICE(0x4040, 0x0025), PCI_DEVICE_CLASS(0x020000, ~0)}, {0,} }; @@ -286,10 +286,11 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) int pci_func_id = PCI_FUNC(pdev->devfn); DECLARE_MAC_BUF(mac); - printk(KERN_INFO "%s \n", netxen_nic_driver_string); + if (pci_func_id == 0) + printk(KERN_INFO "%s \n", netxen_nic_driver_string); if (pdev->class != 0x020000) { - printk(KERN_ERR"NetXen function %d, class %x will not " + printk(KERN_DEBUG "NetXen function %d, class %x will not " "be enabled.\n",pci_func_id, pdev->class); return -ENODEV; } @@ -448,8 +449,12 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) */ adapter->curr_window = 255; - /* initialize the adapter */ - netxen_initialize_adapter_hw(adapter); + if (netxen_nic_get_board_info(adapter) != 0) { + printk("%s: Error getting board config info.\n", + netxen_nic_driver_name); + err = -EIO; + goto err_out_iounmap; + } /* * Adapter in our case is quad port so initialize it before @@ -621,7 +626,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", + printk(KERN_DEBUG "State: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); /* @@ -643,6 +648,7 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) /* * See if the firmware gave us a virtual-physical port mapping. */ + adapter->physical_port = adapter->portnum; i = readl(NETXEN_CRB_NORMALIZE(adapter, CRB_V2P(adapter->portnum))); if (i != 0x55555555) adapter->physical_port = i; @@ -658,22 +664,9 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) goto err_out_free_dev; } + netxen_nic_flash_print(adapter); pci_set_drvdata(pdev, adapter); - switch (adapter->ahw.board_type) { - case NETXEN_NIC_GBE: - printk(KERN_INFO "%s: QUAD GbE board initialized\n", - netxen_nic_driver_name); - break; - - case NETXEN_NIC_XGBE: - printk(KERN_INFO "%s: XGbE board initialized\n", - netxen_nic_driver_name); - break; - } - - adapter->driver_mismatch = 0; - return 0; err_out_free_dev: @@ -781,9 +774,6 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - /* leave the hw in the same state as reboot */ writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); netxen_pinit_from_rom(adapter, 0); @@ -794,7 +784,7 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_INFO "State: 0x%0x\n", + printk(KERN_DEBUG "State: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); i = 100; @@ -844,13 +834,15 @@ static int netxen_nic_open(struct net_device *netdev) irq_handler_t handler; unsigned long flags = IRQF_SAMPLE_RANDOM; + if (adapter->driver_mismatch) + return -EIO; + if (adapter->is_up != NETXEN_ADAPTER_UP_MAGIC) { err = netxen_init_firmware(adapter); if (err != 0) { printk(KERN_ERR "Failed to init firmware\n"); return -EIO; } - netxen_nic_flash_print(adapter); /* setup all the resources for the Phantom... */ /* this include the descriptors for rcv, tx, and status */ @@ -899,14 +891,12 @@ static int netxen_nic_open(struct net_device *netdev) if (adapter->set_mtu) adapter->set_mtu(adapter, netdev->mtu); - if (!adapter->driver_mismatch) - mod_timer(&adapter->watchdog_timer, jiffies); + mod_timer(&adapter->watchdog_timer, jiffies); napi_enable(&adapter->napi); netxen_nic_enable_int(adapter); - if (!adapter->driver_mismatch) - netif_start_queue(netdev); + netif_start_queue(netdev); return 0; } -- cgit v0.10.2 From 439b454edf551f5a6eb49de6b868015724d275ab Mon Sep 17 00:00:00 2001 From: Dhananjay Phadke Date: Sun, 15 Jun 2008 22:59:46 -0700 Subject: netxen: download firmware in pci probe Downloading firmware in pci probe allows recovery in case of firmware failure by reloading the driver. Also reduced delays in firmware load. Signed-off-by: Dhananjay Phadke Signed-off-by: Jeff Garzik diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index f6aeccf..70d1b22 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -840,10 +840,10 @@ int netxen_pinit_from_rom(struct netxen_adapter *adapter, int verbose) netxen_nic_pci_change_crbwindow(adapter, 1); } if (init_delay == 1) { - msleep(2000); + msleep(1000); init_delay = 0; } - msleep(20); + msleep(1); } kfree(buf); @@ -918,12 +918,28 @@ int netxen_initialize_adapter_offload(struct netxen_adapter *adapter) void netxen_free_adapter_offload(struct netxen_adapter *adapter) { + int i; + if (adapter->dummy_dma.addr) { - pci_free_consistent(adapter->ahw.pdev, + i = 100; + do { + if (dma_watchdog_shutdown_request(adapter) == 1) + break; + msleep(50); + if (dma_watchdog_shutdown_poll_result(adapter) == 1) + break; + } while (--i); + + if (i) { + pci_free_consistent(adapter->ahw.pdev, NETXEN_HOST_DUMMY_DMA_SIZE, adapter->dummy_dma.addr, adapter->dummy_dma.phys_addr); - adapter->dummy_dma.addr = NULL; + adapter->dummy_dma.addr = NULL; + } else { + printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", + adapter->netdev->name); + } } } diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 755f4ab..6797ed0 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -543,14 +543,6 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) break; } -#ifdef CONFIG_IA64 - if(adapter->portnum == 0) { - netxen_pinit_from_rom(adapter, 0); - udelay(500); - netxen_load_firmware(adapter); - } -#endif - init_timer(&adapter->watchdog_timer); adapter->ahw.xg_linkup = 0; adapter->watchdog_timer.function = &netxen_watchdog; @@ -622,11 +614,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) err = -ENODEV; goto err_out_free_dev; } + } else { + writel(0, NETXEN_CRB_NORMALIZE(adapter, + CRB_CMDPEG_STATE)); + netxen_pinit_from_rom(adapter, 0); + msleep(1); + netxen_load_firmware(adapter); + netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); } /* clear the register for future unloads/loads */ writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_DEBUG "State: 0x%0x\n", + dev_info(&pdev->dev, "cmdpeg state: 0x%0x\n", readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); /* @@ -757,52 +756,8 @@ static void __devexit netxen_nic_remove(struct pci_dev *pdev) vfree(adapter->cmd_buf_arr); - if (adapter->portnum == 0) { - if (init_firmware_done) { - i = 100; - do { - if (dma_watchdog_shutdown_request(adapter) == 1) - break; - msleep(100); - if (dma_watchdog_shutdown_poll_result(adapter) == 1) - break; - } while (--i); - - if (i == 0) - printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", - netdev->name); - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - /* leave the hw in the same state as reboot */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE)); - netxen_pinit_from_rom(adapter, 0); - msleep(1); - netxen_load_firmware(adapter); - netxen_phantom_init(adapter, NETXEN_NIC_PEG_TUNE); - } - - /* clear the register for future unloads/loads */ - writel(0, NETXEN_CRB_NORMALIZE(adapter, NETXEN_CAM_RAM(0x1fc))); - printk(KERN_DEBUG "State: 0x%0x\n", - readl(NETXEN_CRB_NORMALIZE(adapter, CRB_CMDPEG_STATE))); - - i = 100; - do { - if (dma_watchdog_shutdown_request(adapter) == 1) - break; - msleep(100); - if (dma_watchdog_shutdown_poll_result(adapter) == 1) - break; - } while (--i); - - if (i) { - netxen_free_adapter_offload(adapter); - } else { - printk(KERN_ERR "%s: dma_watchdog_shutdown failed\n", - netdev->name); - } - } + if (adapter->portnum == 0) + netxen_free_adapter_offload(adapter); if (adapter->irq) free_irq(adapter->irq, adapter); -- cgit v0.10.2 From a3b4fcedee5cf1d1342b85f1318c0fe1ff1727a9 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Sat, 14 Jun 2008 10:32:15 -0700 Subject: sky2: 88E8040T pci device id Missed one pci id for 88E8040T. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index 62436b3..c8a5ef2 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -118,6 +118,7 @@ static const struct pci_device_id sky2_id_table[] = { { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4352) }, /* 88E8038 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4353) }, /* 88E8039 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4354) }, /* 88E8040 */ + { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4355) }, /* 88E8040T */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4356) }, /* 88EC033 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x4357) }, /* 88E8042 */ { PCI_DEVICE(PCI_VENDOR_ID_MARVELL, 0x435A) }, /* 88E8048 */ -- cgit v0.10.2 From 6fd65882f5e99972ba96f7cc92086ebac041cdf8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 21:36:24 -0700 Subject: net/enc28j60: section fix Minor bugfixes to the enc28j60 driver ... wrong section marking, indentation, and bogus use of spi_bus_type. Signed-off-by: David Brownell Acked-by: Claudio Lanconelli Signed-off-by: Jeff Garzik diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 46a90e9..0f1581c 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -1556,7 +1556,7 @@ error_alloc: return ret; } -static int enc28j60_remove(struct spi_device *spi) +static int __devexit enc28j60_remove(struct spi_device *spi) { struct enc28j60_net *priv = dev_get_drvdata(&spi->dev); @@ -1573,9 +1573,8 @@ static int enc28j60_remove(struct spi_device *spi) static struct spi_driver enc28j60_driver = { .driver = { .name = DRV_NAME, - .bus = &spi_bus_type, .owner = THIS_MODULE, - }, + }, .probe = enc28j60_probe, .remove = __devexit_p(enc28j60_remove), }; -- cgit v0.10.2 From 7dac6f8df607929e51f4fd598d80bd009c45a9f8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 12 Jun 2008 21:38:06 -0700 Subject: net/enc28j60: low power mode Keep enc28j60 chips in low-power mode when they're not in use. At typically 120 mA, these chips run hot even when idle; this low power mode cuts that power usage by a factor of around 100. This version provides a generic routine to poll a register until its masked value equals some value ... e.g. bit set or cleared. It's basically what the previous wait_phy_ready() did, but this version is generalized to support the handshaking needed to enter and exit low power mode. Signed-off-by: David Brownell Signed-off-by: Claudio Lanconelli Signed-off-by: Jeff Garzik diff --git a/drivers/net/enc28j60.c b/drivers/net/enc28j60.c index 0f1581c..c05cb15 100644 --- a/drivers/net/enc28j60.c +++ b/drivers/net/enc28j60.c @@ -400,26 +400,31 @@ enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data) mutex_unlock(&priv->lock); } -/* - * Wait until the PHY operation is complete. - */ -static int wait_phy_ready(struct enc28j60_net *priv) +static unsigned long msec20_to_jiffies; + +static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val) { - unsigned long timeout = jiffies + 20 * HZ / 1000; - int ret = 1; + unsigned long timeout = jiffies + msec20_to_jiffies; /* 20 msec timeout read */ - while (nolock_regb_read(priv, MISTAT) & MISTAT_BUSY) { + while ((nolock_regb_read(priv, reg) & mask) != val) { if (time_after(jiffies, timeout)) { if (netif_msg_drv(priv)) - printk(KERN_DEBUG DRV_NAME - ": PHY ready timeout!\n"); - ret = 0; - break; + dev_dbg(&priv->spi->dev, + "reg %02x ready timeout!\n", reg); + return -ETIMEDOUT; } cpu_relax(); } - return ret; + return 0; +} + +/* + * Wait until the PHY operation is complete. + */ +static int wait_phy_ready(struct enc28j60_net *priv) +{ + return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1; } /* @@ -594,6 +599,32 @@ static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end) nolock_regw_write(priv, ETXNDL, end); } +/* + * Low power mode shrinks power consumption about 100x, so we'd like + * the chip to be in that mode whenever it's inactive. (However, we + * can't stay in lowpower mode during suspend with WOL active.) + */ +static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low) +{ + if (netif_msg_drv(priv)) + dev_dbg(&priv->spi->dev, "%s power...\n", + is_low ? "low" : "high"); + + mutex_lock(&priv->lock); + if (is_low) { + nolock_reg_bfclr(priv, ECON1, ECON1_RXEN); + poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0); + poll_ready(priv, ECON1, ECON1_TXRTS, 0); + /* ECON2_VRPS was set during initialization */ + nolock_reg_bfset(priv, ECON2, ECON2_PWRSV); + } else { + nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV); + poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY); + /* caller sets ECON1_RXEN */ + } + mutex_unlock(&priv->lock); +} + static int enc28j60_hw_init(struct enc28j60_net *priv) { u8 reg; @@ -612,8 +643,8 @@ static int enc28j60_hw_init(struct enc28j60_net *priv) priv->tx_retry_count = 0; priv->max_pk_counter = 0; priv->rxfilter = RXFILTER_NORMAL; - /* enable address auto increment */ - nolock_regb_write(priv, ECON2, ECON2_AUTOINC); + /* enable address auto increment and voltage regulator powersave */ + nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS); nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT); nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT); @@ -690,7 +721,7 @@ static int enc28j60_hw_init(struct enc28j60_net *priv) static void enc28j60_hw_enable(struct enc28j60_net *priv) { - /* enable interrutps */ + /* enable interrupts */ if (netif_msg_hw(priv)) printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n", __FUNCTION__); @@ -726,15 +757,12 @@ enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex) int ret = 0; if (!priv->hw_enable) { - if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) { + /* link is in low power mode now; duplex setting + * will take effect on next enc28j60_hw_init(). + */ + if (autoneg == AUTONEG_DISABLE && speed == SPEED_10) priv->full_duplex = (duplex == DUPLEX_FULL); - if (!enc28j60_hw_init(priv)) { - if (netif_msg_drv(priv)) - dev_err(&ndev->dev, - "hw_reset() failed\n"); - ret = -EINVAL; - } - } else { + else { if (netif_msg_link(priv)) dev_warn(&ndev->dev, "unsupported link setting\n"); @@ -1307,7 +1335,8 @@ static int enc28j60_net_open(struct net_device *dev) } return -EADDRNOTAVAIL; } - /* Reset the hardware here */ + /* Reset the hardware here (and take it out of low power mode) */ + enc28j60_lowpower(priv, false); enc28j60_hw_disable(priv); if (!enc28j60_hw_init(priv)) { if (netif_msg_ifup(priv)) @@ -1337,6 +1366,7 @@ static int enc28j60_net_close(struct net_device *dev) printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __FUNCTION__); enc28j60_hw_disable(priv); + enc28j60_lowpower(priv, true); netif_stop_queue(dev); return 0; @@ -1537,6 +1567,8 @@ static int __devinit enc28j60_probe(struct spi_device *spi) dev->watchdog_timeo = TX_TIMEOUT; SET_ETHTOOL_OPS(dev, &enc28j60_ethtool_ops); + enc28j60_lowpower(priv, true); + ret = register_netdev(dev); if (ret) { if (netif_msg_probe(priv)) @@ -1581,6 +1613,8 @@ static struct spi_driver enc28j60_driver = { static int __init enc28j60_init(void) { + msec20_to_jiffies = msecs_to_jiffies(20); + return spi_register_driver(&enc28j60_driver); } -- cgit v0.10.2 From 58c7821c4264a7ddd6f0c31c5caaf393b3897f10 Mon Sep 17 00:00:00 2001 From: Radu Cristescu Date: Thu, 12 Jun 2008 17:04:54 -0500 Subject: atl1: relax eeprom mac address error check The atl1 driver tries to determine the MAC address thusly: - If an EEPROM exists, read the MAC address from EEPROM and validate it. - If an EEPROM doesn't exist, try to read a MAC address from SPI flash. - If that fails, try to read a MAC address directly from the MAC Station Address register. - If that fails, assign a random MAC address provided by the kernel. We now have a report of a system fitted with an EEPROM containing all zeros where we expect the MAC address to be, and we currently handle this as an error condition. Turns out, on this system the BIOS writes a valid MAC address to the NIC's MAC Station Address register, but we never try to read it because we return an error when we find the all- zeros address in EEPROM. This patch relaxes the error check and continues looking for a MAC address even if it finds an illegal one in EEPROM. Signed-off-by: Radu Cristescu Signed-off-by: Jay Cliburn Signed-off-by: Jeff Garzik diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 99e0b4c..3c798ae 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -471,7 +471,6 @@ static int atl1_get_permanent_address(struct atl1_hw *hw) memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN); return 0; } - return 1; } /* see if SPI FLAGS exist ? */ -- cgit v0.10.2 From f09f7ee20c867818bacf79426cf491b2749e7eff Mon Sep 17 00:00:00 2001 From: Ang Way Chuang Date: Tue, 17 Jun 2008 21:10:33 -0700 Subject: tun: Proper handling of IPv6 header in tun driver when TUN_NO_PI is set By default, tun.c running in TUN_TUN_DEV mode will set the protocol of packet to IPv4 if TUN_NO_PI is set. My program failed to work when I assumed that the driver will check the first nibble of packet, determine IP version and set the appropriate protocol. Signed-off-by: Ang Way Chuang Acked-by: Max Krasnyansky Signed-off-by: David S. Miller diff --git a/drivers/net/tun.c b/drivers/net/tun.c index 0ce07a3..7ab94c8 100644 --- a/drivers/net/tun.c +++ b/drivers/net/tun.c @@ -313,6 +313,21 @@ static __inline__ ssize_t tun_get_user(struct tun_struct *tun, struct iovec *iv, switch (tun->flags & TUN_TYPE_MASK) { case TUN_TUN_DEV: + if (tun->flags & TUN_NO_PI) { + switch (skb->data[0] & 0xf0) { + case 0x40: + pi.proto = htons(ETH_P_IP); + break; + case 0x60: + pi.proto = htons(ETH_P_IPV6); + break; + default: + tun->dev->stats.rx_dropped++; + kfree_skb(skb); + return -EINVAL; + } + } + skb_reset_mac_header(skb); skb->protocol = pi.proto; skb->dev = tun->dev; -- cgit v0.10.2 From 3c73419c09a5ef73d56472dbfdade9e311496e9b Mon Sep 17 00:00:00 2001 From: Rainer Weikusat Date: Tue, 17 Jun 2008 22:28:05 -0700 Subject: af_unix: fix 'poll for write'/ connected DGRAM sockets The unix_dgram_sendmsg routine implements a (somewhat crude) form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for connected PF_UNIX non-stream sockets when the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_sendmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: Rainer Weikusat Signed-off-by: David S. Miller diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index e18cd36..657835f 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -169,6 +169,11 @@ static inline int unix_may_send(struct sock *sk, struct sock *osk) return (unix_peer(osk) == NULL || unix_our_peer(sk, osk)); } +static inline int unix_recvq_full(struct sock const *sk) +{ + return skb_queue_len(&sk->sk_receive_queue) > sk->sk_max_ack_backlog; +} + static struct sock *unix_peer_get(struct sock *s) { struct sock *peer; @@ -482,6 +487,8 @@ static int unix_socketpair(struct socket *, struct socket *); static int unix_accept(struct socket *, struct socket *, int); static int unix_getname(struct socket *, struct sockaddr *, int *, int); static unsigned int unix_poll(struct file *, struct socket *, poll_table *); +static unsigned int unix_datagram_poll(struct file *, struct socket *, + poll_table *); static int unix_ioctl(struct socket *, unsigned int, unsigned long); static int unix_shutdown(struct socket *, int); static int unix_stream_sendmsg(struct kiocb *, struct socket *, @@ -527,7 +534,7 @@ static const struct proto_ops unix_dgram_ops = { .socketpair = unix_socketpair, .accept = sock_no_accept, .getname = unix_getname, - .poll = datagram_poll, + .poll = unix_datagram_poll, .ioctl = unix_ioctl, .listen = sock_no_listen, .shutdown = unix_shutdown, @@ -548,7 +555,7 @@ static const struct proto_ops unix_seqpacket_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll = datagram_poll, + .poll = unix_datagram_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -983,8 +990,7 @@ static long unix_wait_for_peer(struct sock *other, long timeo) sched = !sock_flag(other, SOCK_DEAD) && !(other->sk_shutdown & RCV_SHUTDOWN) && - (skb_queue_len(&other->sk_receive_queue) > - other->sk_max_ack_backlog); + unix_recvq_full(other); unix_state_unlock(other); @@ -1058,8 +1064,7 @@ restart: if (other->sk_state != TCP_LISTEN) goto out_unlock; - if (skb_queue_len(&other->sk_receive_queue) > - other->sk_max_ack_backlog) { + if (unix_recvq_full(other)) { err = -EAGAIN; if (!timeo) goto out_unlock; @@ -1428,9 +1433,7 @@ restart: goto out_unlock; } - if (unix_peer(other) != sk && - (skb_queue_len(&other->sk_receive_queue) > - other->sk_max_ack_backlog)) { + if (unix_peer(other) != sk && unix_recvq_full(other)) { if (!timeo) { err = -EAGAIN; goto out_unlock; @@ -1991,6 +1994,64 @@ static unsigned int unix_poll(struct file * file, struct socket *sock, poll_tabl return mask; } +static unsigned int unix_datagram_poll(struct file *file, struct socket *sock, + poll_table *wait) +{ + struct sock *sk = sock->sk, *peer; + unsigned int mask; + + poll_wait(file, sk->sk_sleep, wait); + + peer = unix_peer_get(sk); + if (peer) { + if (peer != sk) { + /* + * Writability of a connected socket additionally + * depends on the state of the receive queue of the + * peer. + */ + poll_wait(file, &unix_sk(peer)->peer_wait, wait); + } else { + sock_put(peer); + peer = NULL; + } + } + + mask = 0; + + /* exceptional events? */ + if (sk->sk_err || !skb_queue_empty(&sk->sk_error_queue)) + mask |= POLLERR; + if (sk->sk_shutdown & RCV_SHUTDOWN) + mask |= POLLRDHUP; + if (sk->sk_shutdown == SHUTDOWN_MASK) + mask |= POLLHUP; + + /* readable? */ + if (!skb_queue_empty(&sk->sk_receive_queue) || + (sk->sk_shutdown & RCV_SHUTDOWN)) + mask |= POLLIN | POLLRDNORM; + + /* Connection-based need to check for termination and startup */ + if (sk->sk_type == SOCK_SEQPACKET) { + if (sk->sk_state == TCP_CLOSE) + mask |= POLLHUP; + /* connection hasn't started yet? */ + if (sk->sk_state == TCP_SYN_SENT) + return mask; + } + + /* writable? */ + if (unix_writable(sk) && !(peer && unix_recvq_full(peer))) + mask |= POLLOUT | POLLWRNORM | POLLWRBAND; + else + set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags); + + if (peer) + sock_put(peer); + + return mask; +} #ifdef CONFIG_PROC_FS static struct sock *first_unix_socket(int *i) -- cgit v0.10.2 From 3a5be7d4b079f3a9ce1e8ce4a93ba15ae6d00111 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Wed, 18 Jun 2008 01:19:51 -0700 Subject: Revert "mac80211: Use skb_header_cloned() on TX path." This reverts commit 608961a5eca8d3c6bd07172febc27b5559408c5d. The problem is that the mac80211 stack not only needs to be able to muck with the link-level headers, it also might need to mangle all of the packet data if doing sw wireless encryption. This fixes kernel bugzilla #10903. Thanks to Didier Raboud (for the bugzilla report), Andrew Prince (for bisecting), Johannes Berg (for bringing this bisection analysis to my attention), and Ilpo (for trying to analyze this purely from the TCP side). In 2.6.27 we can take another stab at this, by using something like skb_cow_data() when the TX path of mac80211 ends up with a non-NULL tx->key. The ESP protocol code in the IPSEC stack can be used as a model for implementation. Signed-off-by: David S. Miller diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 1d7dd54..28d8bd5 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1562,13 +1562,13 @@ int ieee80211_subif_start_xmit(struct sk_buff *skb, * be cloned. This could happen, e.g., with Linux bridge code passing * us broadcast frames. */ - if (head_need > 0 || skb_header_cloned(skb)) { + if (head_need > 0 || skb_cloned(skb)) { #if 0 printk(KERN_DEBUG "%s: need to reallocate buffer for %d bytes " "of headroom\n", dev->name, head_need); #endif - if (skb_header_cloned(skb)) + if (skb_cloned(skb)) I802_DEBUG_INC(local->tx_expand_skb_head_cloned); else I802_DEBUG_INC(local->tx_expand_skb_head); -- cgit v0.10.2 From 6d1a3fb567a728d31474636e167c324702a0c38b Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Wed, 18 Jun 2008 02:07:07 -0700 Subject: netlink: genl: fix circular locking genetlink has a circular locking dependency when dumping the registered families: - dump start: genl_rcv() : take genl_mutex genl_rcv_msg() : call netlink_dump_start() while holding genl_mutex netlink_dump_start(), netlink_dump() : take nlk->cb_mutex ctrl_dumpfamily() : try to detect this case and not take genl_mutex a second time - dump continuance: netlink_rcv() : call netlink_dump netlink_dump : take nlk->cb_mutex ctrl_dumpfamily() : take genl_mutex Register genl_lock as callback mutex with netlink to fix this. This slightly widens an already existing module unload race, the genl ops used during the dump might go away when the module is unloaded. Thomas Graf is working on a seperate fix for this. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netlink/genetlink.c b/net/netlink/genetlink.c index f5aa23c..3e1191c 100644 --- a/net/netlink/genetlink.c +++ b/net/netlink/genetlink.c @@ -444,8 +444,11 @@ static int genl_rcv_msg(struct sk_buff *skb, struct nlmsghdr *nlh) if (ops->dumpit == NULL) return -EOPNOTSUPP; - return netlink_dump_start(genl_sock, skb, nlh, - ops->dumpit, ops->done); + genl_unlock(); + err = netlink_dump_start(genl_sock, skb, nlh, + ops->dumpit, ops->done); + genl_lock(); + return err; } if (ops->doit == NULL) @@ -603,9 +606,6 @@ static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb) int chains_to_skip = cb->args[0]; int fams_to_skip = cb->args[1]; - if (chains_to_skip != 0) - genl_lock(); - for (i = 0; i < GENL_FAM_TAB_SIZE; i++) { if (i < chains_to_skip) continue; @@ -623,9 +623,6 @@ static int ctrl_dumpfamily(struct sk_buff *skb, struct netlink_callback *cb) } errout: - if (chains_to_skip != 0) - genl_unlock(); - cb->args[0] = i; cb->args[1] = n; @@ -770,7 +767,7 @@ static int __init genl_init(void) /* we'll bump the group number right afterwards */ genl_sock = netlink_kernel_create(&init_net, NETLINK_GENERIC, 0, - genl_rcv, NULL, THIS_MODULE); + genl_rcv, &genl_mutex, THIS_MODULE); if (genl_sock == NULL) panic("GENL: Cannot initialize generic netlink\n"); -- cgit v0.10.2 From 50db04dd9c74178e68a981a7127c37252ffb3242 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Sun, 15 Jun 2008 00:47:36 +0200 Subject: debugobjects: fix lockdep warning Daniel J Blueman reported: | ======================================================= | [ INFO: possible circular locking dependency detected ] | 2.6.26-rc5-201c #1 | ------------------------------------------------------- | nscd/3669 is trying to acquire lock: | (&n->list_lock){.+..}, at: [] deactivate_slab+0x173/0x1e0 | | but task is already holding lock: | (&obj_hash[i].lock){++..}, at: [] | __debug_object_init+0x2f/0x350 | | which lock already depends on the new lock. There are two locks involved here; the first is a SLUB-local lock, and the second is a debugobjects-local lock. They are basically taken in two different orders: 1. SLUB { debugobjects { ... } } 2. debugobjects { SLUB { ... } } This patch changes pattern #2 by trying to fill the memory pool (e.g. the call into SLUB/kmalloc()) outside the debugobjects lock, so now the two patterns look like this: 1. SLUB { debugobjects { ... } } 2. SLUB { } debugobjects { ... } [ daniel.blueman@gmail.com: pool_lock needs to be taken irq safe in fill_pool ] Reported-by: Daniel J Blueman Signed-off-by: Vegard Nossum Signed-off-by: Thomas Gleixner diff --git a/lib/debugobjects.c b/lib/debugobjects.c index a76a5e1..85b18d7 100644 --- a/lib/debugobjects.c +++ b/lib/debugobjects.c @@ -68,6 +68,7 @@ static int fill_pool(void) { gfp_t gfp = GFP_ATOMIC | __GFP_NORETRY | __GFP_NOWARN; struct debug_obj *new; + unsigned long flags; if (likely(obj_pool_free >= ODEBUG_POOL_MIN_LEVEL)) return obj_pool_free; @@ -81,10 +82,10 @@ static int fill_pool(void) if (!new) return obj_pool_free; - spin_lock(&pool_lock); + spin_lock_irqsave(&pool_lock, flags); hlist_add_head(&new->node, &obj_pool); obj_pool_free++; - spin_unlock(&pool_lock); + spin_unlock_irqrestore(&pool_lock, flags); } return obj_pool_free; } @@ -110,16 +111,13 @@ static struct debug_obj *lookup_object(void *addr, struct debug_bucket *b) } /* - * Allocate a new object. If the pool is empty and no refill possible, - * switch off the debugger. + * Allocate a new object. If the pool is empty, switch off the debugger. */ static struct debug_obj * alloc_object(void *addr, struct debug_bucket *b, struct debug_obj_descr *descr) { struct debug_obj *obj = NULL; - int retry = 0; -repeat: spin_lock(&pool_lock); if (obj_pool.first) { obj = hlist_entry(obj_pool.first, typeof(*obj), node); @@ -141,9 +139,6 @@ repeat: } spin_unlock(&pool_lock); - if (fill_pool() && !obj && !retry++) - goto repeat; - return obj; } @@ -261,6 +256,8 @@ __debug_object_init(void *addr, struct debug_obj_descr *descr, int onstack) struct debug_obj *obj; unsigned long flags; + fill_pool(); + db = get_bucket((unsigned long) addr); spin_lock_irqsave(&db->lock, flags); -- cgit v0.10.2 From b17879f71c2eb4a10f5a63918819d9d572b23a9a Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 18 Jun 2008 08:34:39 +1000 Subject: [POWERPC] 4xx: Clear new TLB cache attribute bits in Data Storage vector A recent commit added support for the new 440x6 and 464 cores that have the added WL1, IL1I, IL1D, IL2I, and ILD2 bits for the caching attributes in the TLBs. The new bits were cleared in the finish_tlb_load function, however a similar bit of code was missed in the DataStorage interrupt vector. Signed-off-by: Josh Boyer Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index c2b9dc4..22b5d2c 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -368,7 +368,12 @@ interrupt_base: rlwimi r11,r13,0,26,31 /* Insert static perms */ - rlwinm r11,r11,0,20,15 /* Clear U0-U3 */ + /* + * Clear U0-U3 and WL1 IL1I IL1D IL2I IL2D bits which are added + * on newer 440 cores like the 440x6 used on AMCC 460EX/460GT (see + * include/asm-powerpc/pgtable-ppc32.h for details). + */ + rlwinm r11,r11,0,20,10 /* find the TLB index that caused the fault. It has to be here. */ tlbsx r10, 0, r10 -- cgit v0.10.2 From 65ba6cdc837af9b77354d03987354196ac4eb308 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Wed, 18 Jun 2008 16:40:35 +1000 Subject: [POWERPC] Clear sub-page HPTE present bits when demoting page size When we demote a slice from 64k to 4k, and we are about to insert an HPTE for a 4k subpage and we notice that there is an existing 64k HPTE, we first invalidate that HPTE before inserting the new 4k subpage HPTE. Since the bits that encode which hash bucket the old HPTE was in overlap with the bits that encode which of the 16 subpages have HPTEs, we need to clear out the subpage HPTE-present bits before starting to insert HPTEs for the 4k subpages. If we don't do that, we can erroneously think that a subpage already has an HPTE when it doesn't. That in itself wouldn't be such a problem except that when we go to update the HPTE that we think is present on machines with a hypervisor, the hypervisor can tell us that the HPTE we think is there is actually there even though it isn't, which can lead to a process getting stuck in a loop, continually faulting. The reason for the confusion is that the AVPN (abbreviated virtual page number) we are looking for in the HPTE for a 4k subpage can actually match the AVPN in a stale HPTE for another 64k page. For example, the HPTE for the 4k subpage at 0x84000f000 will be in the same hash bucket and have the same AVPN as the HPTE for the 64k page at 0x8400f0000. This fixes the code to clear out the subpage HPTE-present bits. Signed-off-by: Paul Mackerras diff --git a/arch/powerpc/mm/hash_low_64.S b/arch/powerpc/mm/hash_low_64.S index 21d2484..70f4c83 100644 --- a/arch/powerpc/mm/hash_low_64.S +++ b/arch/powerpc/mm/hash_low_64.S @@ -568,6 +568,10 @@ htab_inval_old_hpte: ld r7,STK_PARM(r9)(r1) /* ssize */ ld r8,STK_PARM(r8)(r1) /* local */ bl .flush_hash_page + /* Clear out _PAGE_HPTE_SUB bits in the new linux PTE */ + lis r0,_PAGE_HPTE_SUB@h + ori r0,r0,_PAGE_HPTE_SUB@l + andc r30,r30,r0 b htab_insert_pte htab_bail_ok: -- cgit v0.10.2 From fdf7be6f13b920f0d80c249c70f794a2f6d53992 Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Wed, 18 Jun 2008 16:22:48 +0000 Subject: Revert "[WATCHDOG] hpwdt: Fix NMI handling." The old setup works better. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 2bc1f74..2686f3e 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -418,20 +418,23 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, static unsigned long rom_pl; static int die_nmi_called; - if (ulReason == DIE_NMI || ulReason == DIE_NMI_IPI) { - spin_lock_irqsave(&rom_lock, rom_pl); - if (!die_nmi_called) - asminline_call(&cmn_regs, cru_rom_addr); - die_nmi_called = 1; - spin_unlock_irqrestore(&rom_lock, rom_pl); - if (cmn_regs.u1.ral != 0) { - panic("An NMI occurred, please see the Integrated " - "Management Log for details.\n"); - } + if (ulReason != DIE_NMI && ulReason != DIE_NMI_IPI) + return NOTIFY_OK; + + spin_lock_irqsave(&rom_lock, rom_pl); + if (!die_nmi_called) + asminline_call(&cmn_regs, cru_rom_addr); + die_nmi_called = 1; + spin_unlock_irqrestore(&rom_lock, rom_pl); + if (cmn_regs.u1.ral == 0) { + printk(KERN_WARNING "hpwdt: An NMI occurred, " + "but unable to determine source.\n"); + } else { + panic("An NMI occurred, please see the Integrated " + "Management Log for details.\n"); } - die_nmi_called = 0; - return NOTIFY_DONE; + return NOTIFY_STOP; } /* -- cgit v0.10.2 From 0bf607c5b4edd13362e4add6ca1e81f8a9fbd47c Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 31 May 2008 19:01:26 +0200 Subject: firewire: don't panic on invalid AR request buffer BUG() at this place is wrong. (Unless if the low level driver would already do higher-level input validation of incoming request headers.) Invalid incoming requests or bugs in the controller which corrupt the AR-req buffer needlessly crashed the box because this is run in tasklet context. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index ccf0e4c..7f92c45 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -572,7 +572,8 @@ allocate_request(struct fw_packet *p) break; default: - BUG(); + fw_error("ERROR - corrupt request received - %08x %08x %08x\n", + p->header[0], p->header[1], p->header[2]); return NULL; } -- cgit v0.10.2 From ccff962943df539c5860aa120eecc189d70a308b Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 31 May 2008 19:36:06 +0200 Subject: firewire: fw-ohci: use of uninitialized data in AR handler header_length and payload_length are filled with random data if an unknown tcode was read from the AR buffer (i.e. if the AR buffer contained invalid data). We still need a better strategy to recover from this, but at least handle_ar_packet now doesn't return out of bound buffer addresses anymore. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 4f02c55..b062e73 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -548,6 +548,11 @@ static __le32 *handle_ar_packet(struct ar_context *ctx, __le32 *buffer) p.header_length = 12; p.payload_length = 0; break; + + default: + /* FIXME: Stop context, discard everything, and restart? */ + p.header_length = 0; + p.payload_length = 0; } p.payload = (void *) buffer + p.header_length; -- cgit v0.10.2 From e896ec4302f45fdaf2fc78aec0093eca5478fe28 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 20:49:38 +0200 Subject: firewire: fw-ohci: disable PHY packet reception into AR context We want the rcvPhyPkt bit in LinkControl off before we start using the chip. However, the spec says that the reset value of it is undefined. Hence switch it explicitly off. https://bugzilla.redhat.com/show_bug.cgi?id=244576#c48 shows that for example the nForce2 integrated FireWire controller seems to have it on by default. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index b062e73..481d3f3 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1473,6 +1473,8 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwapData); + reg_write(ohci, OHCI1394_LinkControlClear, + OHCI1394_LinkControl_rcvPhyPkt); reg_write(ohci, OHCI1394_LinkControlSet, OHCI1394_LinkControl_rcvSelfID | OHCI1394_LinkControl_cycleTimerEnable | -- cgit v0.10.2 From affc9c24ade666f9903163c12686da567dbfe06f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Thu, 5 Jun 2008 20:50:53 +0200 Subject: firewire: fw-ohci: write selfIDBufferPtr before LinkControl.rcvSelfID MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit OHCI 1.1 clause 5.10 requires that selfIDBufferPtr is valid when a 1 is written into LinkControl.rcvSelfID. This driver bug has so far not been known to cause harm because most chips obviously accept a later selfIDBufferPtr write, at least before HCControl.linkEnable is written. Signed-off-by: Stefan Richter Signed-off-by: Jarod Wilson Signed-off-by: Kristian Høgsberg diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 481d3f3..96e3cce 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -1473,6 +1473,7 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) reg_write(ohci, OHCI1394_HCControlClear, OHCI1394_HCControl_noByteSwapData); + reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); reg_write(ohci, OHCI1394_LinkControlClear, OHCI1394_LinkControl_rcvPhyPkt); reg_write(ohci, OHCI1394_LinkControlSet, @@ -1488,7 +1489,6 @@ static int ohci_enable(struct fw_card *card, u32 *config_rom, size_t length) ar_context_run(&ohci->ar_request_ctx); ar_context_run(&ohci->ar_response_ctx); - reg_write(ohci, OHCI1394_SelfIDBuffer, ohci->self_id_bus); reg_write(ohci, OHCI1394_PhyUpperBound, 0x00010000); reg_write(ohci, OHCI1394_IntEventClear, ~0); reg_write(ohci, OHCI1394_IntMaskClear, ~0); -- cgit v0.10.2 From 5cb84067d646fa3889463129dad8b218806b4698 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Fri, 6 Jun 2008 22:11:30 +0200 Subject: firewire: fill_bus_reset_event needs lock protection MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Callers of fill_bus_reset_event() have to take card->lock. Otherwise access to node data may oops if node removal is in progress. A lockless alternative would be - event->local_node_id = card->local_node->node_id; + tmp = fw_node_get(card->local_node); + event->local_node_id = tmp->node_id; + fw_node_put(tmp); and ditto with the other node pointers which fill_bus_reset_event() accesses. But I went the locked route because one of the two callers already holds the lock. As a bonus, we don't need the memory barrier anymore because device->generation and device->node_id are written in a card->lock protected section. Signed-off-by: Stefan Richter Signed-off-by: Kristian Høgsberg diff --git a/drivers/firewire/fw-cdev.c b/drivers/firewire/fw-cdev.c index dda1401..c639915 100644 --- a/drivers/firewire/fw-cdev.c +++ b/drivers/firewire/fw-cdev.c @@ -205,6 +205,7 @@ fw_device_op_read(struct file *file, return dequeue_event(client, buffer, count); } +/* caller must hold card->lock so that node pointers can be dereferenced here */ static void fill_bus_reset_event(struct fw_cdev_event_bus_reset *event, struct client *client) @@ -214,7 +215,6 @@ fill_bus_reset_event(struct fw_cdev_event_bus_reset *event, event->closure = client->bus_reset_closure; event->type = FW_CDEV_EVENT_BUS_RESET; event->generation = client->device->generation; - smp_rmb(); /* node_id must not be older than generation */ event->node_id = client->device->node_id; event->local_node_id = card->local_node->node_id; event->bm_node_id = 0; /* FIXME: We don't track the BM. */ @@ -274,6 +274,7 @@ static int ioctl_get_info(struct client *client, void *buffer) { struct fw_cdev_get_info *get_info = buffer; struct fw_cdev_event_bus_reset bus_reset; + struct fw_card *card = client->device->card; unsigned long ret = 0; client->version = get_info->version; @@ -299,13 +300,17 @@ static int ioctl_get_info(struct client *client, void *buffer) client->bus_reset_closure = get_info->bus_reset_closure; if (get_info->bus_reset != 0) { void __user *uptr = u64_to_uptr(get_info->bus_reset); + unsigned long flags; + spin_lock_irqsave(&card->lock, flags); fill_bus_reset_event(&bus_reset, client); + spin_unlock_irqrestore(&card->lock, flags); + if (copy_to_user(uptr, &bus_reset, sizeof(bus_reset))) return -EFAULT; } - get_info->card = client->device->card->index; + get_info->card = card->index; return 0; } -- cgit v0.10.2 From 161b96e782ec995c55843101976d9c35b57aa109 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 14 Jun 2008 14:23:43 +0200 Subject: firewire: fw-ohci: unify printk prefixes The messages which can be enabled by fw-ohci's debug module parameter are changed from KERN_DEBUG to KERN_NOTICE level and uniformly prefixed with "firewire_ohci: ". This further simplifies communication with users when we ask them to capture debug messages. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-ohci.c b/drivers/firewire/fw-ohci.c index 96e3cce..0b66306 100644 --- a/drivers/firewire/fw-ohci.c +++ b/drivers/firewire/fw-ohci.c @@ -265,27 +265,25 @@ static void log_irqs(u32 evt) !(evt & OHCI1394_busReset)) return; - printk(KERN_DEBUG KBUILD_MODNAME ": IRQ " - "%08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", - evt, - evt & OHCI1394_selfIDComplete ? " selfID" : "", - evt & OHCI1394_RQPkt ? " AR_req" : "", - evt & OHCI1394_RSPkt ? " AR_resp" : "", - evt & OHCI1394_reqTxComplete ? " AT_req" : "", - evt & OHCI1394_respTxComplete ? " AT_resp" : "", - evt & OHCI1394_isochRx ? " IR" : "", - evt & OHCI1394_isochTx ? " IT" : "", - evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", - evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", - evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", - evt & OHCI1394_regAccessFail ? " regAccessFail" : "", - evt & OHCI1394_busReset ? " busReset" : "", - evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | - OHCI1394_RSPkt | OHCI1394_reqTxComplete | - OHCI1394_respTxComplete | OHCI1394_isochRx | - OHCI1394_isochTx | OHCI1394_postedWriteErr | - OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | - OHCI1394_regAccessFail | OHCI1394_busReset) + fw_notify("IRQ %08x%s%s%s%s%s%s%s%s%s%s%s%s%s\n", evt, + evt & OHCI1394_selfIDComplete ? " selfID" : "", + evt & OHCI1394_RQPkt ? " AR_req" : "", + evt & OHCI1394_RSPkt ? " AR_resp" : "", + evt & OHCI1394_reqTxComplete ? " AT_req" : "", + evt & OHCI1394_respTxComplete ? " AT_resp" : "", + evt & OHCI1394_isochRx ? " IR" : "", + evt & OHCI1394_isochTx ? " IT" : "", + evt & OHCI1394_postedWriteErr ? " postedWriteErr" : "", + evt & OHCI1394_cycleTooLong ? " cycleTooLong" : "", + evt & OHCI1394_cycle64Seconds ? " cycle64Seconds" : "", + evt & OHCI1394_regAccessFail ? " regAccessFail" : "", + evt & OHCI1394_busReset ? " busReset" : "", + evt & ~(OHCI1394_selfIDComplete | OHCI1394_RQPkt | + OHCI1394_RSPkt | OHCI1394_reqTxComplete | + OHCI1394_respTxComplete | OHCI1394_isochRx | + OHCI1394_isochTx | OHCI1394_postedWriteErr | + OHCI1394_cycleTooLong | OHCI1394_cycle64Seconds | + OHCI1394_regAccessFail | OHCI1394_busReset) ? " ?" : ""); } @@ -308,23 +306,22 @@ static void log_selfids(int node_id, int generation, int self_id_count, u32 *s) if (likely(!(param_debug & OHCI_PARAM_DEBUG_SELFIDS))) return; - printk(KERN_DEBUG KBUILD_MODNAME ": %d selfIDs, generation %d, " - "local node ID %04x\n", self_id_count, generation, node_id); + fw_notify("%d selfIDs, generation %d, local node ID %04x\n", + self_id_count, generation, node_id); for (; self_id_count--; ++s) if ((*s & 1 << 23) == 0) - printk(KERN_DEBUG "selfID 0: %08x, phy %d [%c%c%c] " - "%s gc=%d %s %s%s%s\n", - *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2), - speed[*s >> 14 & 3], *s >> 16 & 63, - power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "", - *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : ""); + fw_notify("selfID 0: %08x, phy %d [%c%c%c] " + "%s gc=%d %s %s%s%s\n", + *s, *s >> 24 & 63, _p(s, 6), _p(s, 4), _p(s, 2), + speed[*s >> 14 & 3], *s >> 16 & 63, + power[*s >> 8 & 7], *s >> 22 & 1 ? "L" : "", + *s >> 11 & 1 ? "c" : "", *s & 2 ? "i" : ""); else - printk(KERN_DEBUG "selfID n: %08x, phy %d " - "[%c%c%c%c%c%c%c%c]\n", - *s, *s >> 24 & 63, - _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10), - _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2)); + fw_notify("selfID n: %08x, phy %d [%c%c%c%c%c%c%c%c]\n", + *s, *s >> 24 & 63, + _p(s, 16), _p(s, 14), _p(s, 12), _p(s, 10), + _p(s, 8), _p(s, 6), _p(s, 4), _p(s, 2)); } static const char *evts[] = { @@ -373,15 +370,14 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt) evt = 0x1f; if (evt == OHCI1394_evt_bus_reset) { - printk(KERN_DEBUG "A%c evt_bus_reset, generation %d\n", - dir, (header[2] >> 16) & 0xff); + fw_notify("A%c evt_bus_reset, generation %d\n", + dir, (header[2] >> 16) & 0xff); return; } if (header[0] == ~header[1]) { - printk(KERN_DEBUG "A%c %s, %s, %08x\n", - dir, evts[evt], phys[header[0] >> 30 & 0x3], - header[0]); + fw_notify("A%c %s, %s, %08x\n", + dir, evts[evt], phys[header[0] >> 30 & 0x3], header[0]); return; } @@ -400,24 +396,23 @@ static void log_ar_at_event(char dir, int speed, u32 *header, int evt) switch (tcode) { case 0xe: case 0xa: - printk(KERN_DEBUG "A%c %s, %s\n", - dir, evts[evt], tcodes[tcode]); + fw_notify("A%c %s, %s\n", dir, evts[evt], tcodes[tcode]); break; case 0x0: case 0x1: case 0x4: case 0x5: case 0x9: - printk(KERN_DEBUG "A%c spd %x tl %02x, " - "%04x -> %04x, %s, " - "%s, %04x%08x%s\n", - dir, speed, header[0] >> 10 & 0x3f, - header[1] >> 16, header[0] >> 16, evts[evt], - tcodes[tcode], header[1] & 0xffff, header[2], specific); + fw_notify("A%c spd %x tl %02x, " + "%04x -> %04x, %s, " + "%s, %04x%08x%s\n", + dir, speed, header[0] >> 10 & 0x3f, + header[1] >> 16, header[0] >> 16, evts[evt], + tcodes[tcode], header[1] & 0xffff, header[2], specific); break; default: - printk(KERN_DEBUG "A%c spd %x tl %02x, " - "%04x -> %04x, %s, " - "%s%s\n", - dir, speed, header[0] >> 10 & 0x3f, - header[1] >> 16, header[0] >> 16, evts[evt], - tcodes[tcode], specific); + fw_notify("A%c spd %x tl %02x, " + "%04x -> %04x, %s, " + "%s%s\n", + dir, speed, header[0] >> 10 & 0x3f, + header[1] >> 16, header[0] >> 16, evts[evt], + tcodes[tcode], specific); } } -- cgit v0.10.2 From ae1e53557911d7e60a637b2400173add958aae94 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Wed, 18 Jun 2008 18:20:45 +0200 Subject: firewire: deadline for PHY config transmission If the low-level driver failed to initialize a card properly without noticing it, fw-core was blocked indefinitely when trying to send a PHY config packet. This hung up the events kernel thread, e.g. locked up keyboard input. https://bugzilla.redhat.com/show_bug.cgi?id=444694 https://bugzilla.redhat.com/show_bug.cgi?id=446763 This problem was introduced between 2.6.25 and 2.6.26-rc1 by commit 2a0a2590498be7b92e3e76409c9b8ee722e23c8f "firewire: wait until PHY configuration packet was transmitted (fix bus reset loop)". The solution is to wait with timeout. I tested it with 7 different working controllers and 1 non-working controller. On the working ones, the packet callback complete()s usually --- but not always --- before a timeout of 10ms. Hence I chose a safer timeout of 100ms. On the few tests with the non-working controller ALi M5271, PHY config packet transmission always timed out so far. (Fw-ohci needs to be fixed for this controller independently of this deadline fix. Often the core doesn't even attempt to send a phy config because not even self ID reception works.) Signed-off-by: Stefan Richter diff --git a/drivers/firewire/fw-transaction.c b/drivers/firewire/fw-transaction.c index 7f92c45..03ae8a7 100644 --- a/drivers/firewire/fw-transaction.c +++ b/drivers/firewire/fw-transaction.c @@ -20,6 +20,7 @@ #include #include +#include #include #include #include @@ -297,37 +298,55 @@ EXPORT_SYMBOL(fw_send_request); struct fw_phy_packet { struct fw_packet packet; struct completion done; + struct kref kref; }; -static void -transmit_phy_packet_callback(struct fw_packet *packet, - struct fw_card *card, int status) +static void phy_packet_release(struct kref *kref) +{ + struct fw_phy_packet *p = + container_of(kref, struct fw_phy_packet, kref); + kfree(p); +} + +static void transmit_phy_packet_callback(struct fw_packet *packet, + struct fw_card *card, int status) { struct fw_phy_packet *p = container_of(packet, struct fw_phy_packet, packet); complete(&p->done); + kref_put(&p->kref, phy_packet_release); } void fw_send_phy_config(struct fw_card *card, int node_id, int generation, int gap_count) { - struct fw_phy_packet p; + struct fw_phy_packet *p; + long timeout = DIV_ROUND_UP(HZ, 10); u32 data = PHY_IDENTIFIER(PHY_PACKET_CONFIG) | PHY_CONFIG_ROOT_ID(node_id) | PHY_CONFIG_GAP_COUNT(gap_count); - p.packet.header[0] = data; - p.packet.header[1] = ~data; - p.packet.header_length = 8; - p.packet.payload_length = 0; - p.packet.speed = SCODE_100; - p.packet.generation = generation; - p.packet.callback = transmit_phy_packet_callback; - init_completion(&p.done); - - card->driver->send_request(card, &p.packet); - wait_for_completion(&p.done); + p = kmalloc(sizeof(*p), GFP_KERNEL); + if (p == NULL) + return; + + p->packet.header[0] = data; + p->packet.header[1] = ~data; + p->packet.header_length = 8; + p->packet.payload_length = 0; + p->packet.speed = SCODE_100; + p->packet.generation = generation; + p->packet.callback = transmit_phy_packet_callback; + init_completion(&p->done); + kref_set(&p->kref, 2); + + card->driver->send_request(card, &p->packet); + timeout = wait_for_completion_timeout(&p->done, timeout); + kref_put(&p->kref, phy_packet_release); + + /* will leak p if the callback is never executed */ + WARN_ON(timeout == 0); } void fw_flush_transactions(struct fw_card *card) -- cgit v0.10.2 From a7b64b8704b03c9972b114932fdf517e06153f11 Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Sat, 14 Jun 2008 14:24:53 +0200 Subject: firewire: Kconfig menu touch-up Emphasize the recommendation to build only one stack. Trim the prompts to better fit into short attention spans. Signed-off-by: Stefan Richter diff --git a/drivers/firewire/Kconfig b/drivers/firewire/Kconfig index fb4d391..76f2671 100644 --- a/drivers/firewire/Kconfig +++ b/drivers/firewire/Kconfig @@ -1,28 +1,26 @@ -comment "An alternative FireWire stack is available with EXPERIMENTAL=y" +comment "A new alternative FireWire stack is available with EXPERIMENTAL=y" depends on EXPERIMENTAL=n +comment "Enable only one of the two stacks, unless you know what you are doing" + depends on EXPERIMENTAL + config FIREWIRE - tristate "IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL" + tristate "New FireWire stack, EXPERIMENTAL" depends on EXPERIMENTAL select CRC_ITU_T help This is the "Juju" FireWire stack, a new alternative implementation designed for robustness and simplicity. You can build either this - stack, or the classic stack (the ieee1394 driver, ohci1394 etc.) - or both. Please read http://wiki.linux1394.org/JujuMigration before - you enable the new stack. + stack, or the old stack (the ieee1394 driver, ohci1394 etc.) or both. + Please read http://wiki.linux1394.org/JujuMigration before you + enable the new stack. To compile this driver as a module, say M here: the module will be called firewire-core. It functionally replaces ieee1394, raw1394, and video1394. - NOTE: - - You should only build ONE of the stacks, unless you REALLY know what - you are doing. - config FIREWIRE_OHCI - tristate "Support for OHCI FireWire host controllers" + tristate "OHCI-1394 controllers" depends on PCI && FIREWIRE help Enable this driver if you have a FireWire controller based @@ -33,12 +31,12 @@ config FIREWIRE_OHCI called firewire-ohci. It replaces ohci1394 of the classic IEEE 1394 stack. - NOTE: + NOTE: - You should only build ohci1394 or firewire-ohci, but not both. - If you nevertheless want to install both, you should configure them - only as modules and blacklist the driver(s) which you don't want to - have auto-loaded. Add either + You should only build either firewire-ohci or the old ohci1394 driver, + but not both. If you nevertheless want to install both, you should + configure them only as modules and blacklist the driver(s) which you + don't want to have auto-loaded. Add either blacklist firewire-ohci or @@ -60,7 +58,7 @@ config FIREWIRE_OHCI_DEBUG default y config FIREWIRE_SBP2 - tristate "Support for storage devices (SBP-2 protocol driver)" + tristate "Storage devices (SBP-2 protocol)" depends on FIREWIRE && SCSI help This option enables you to use SBP-2 devices connected to a -- cgit v0.10.2 From 9499fe2b340d19ef55c349de794db9d917e7403f Mon Sep 17 00:00:00 2001 From: Stefan Richter Date: Mon, 16 Jun 2008 01:39:28 +0200 Subject: ieee1394: Kconfig menu touch-up Rename and reorder some prompts and modify some help texts. The result: -------------------- IEEE 1394 (FireWire) support -------------------- *** Enable only one of the two stacks, unless you know what you are doing *** New FireWire stack, EXPERIMENTAL OHCI-1394 controllers Storage devices (SBP-2 protocol) Stable FireWire stack OHCI-1394 controllers PCILynx controller Storage devices (SBP-2 protocol) Enable replacement for physical DMA in SBP2 IP over 1394 raw1394 userspace interface video1394 userspace interface dv1394 userspace interface (deprecated) Excessive debugging output The old prompts for reference: -------------------- IEEE 1394 (FireWire) support -------------------- IEEE 1394 (FireWire) support - alternative stack, EXPERIMENTAL Support for OHCI FireWire host controllers Support for storage devices (SBP-2 protocol driver) IEEE 1394 (FireWire) support *** Subsystem Options *** Excessive debugging output *** Controllers *** Texas Instruments PCILynx support OHCI-1394 support *** Protocols *** OHCI-1394 Video support SBP-2 support (Harddisks etc.) Enable replacement for physical DMA in SBP2 IP over 1394 OHCI-DV I/O support (deprecated) Raw IEEE1394 I/O support Signed-off-by: Stefan Richter diff --git a/drivers/ieee1394/Kconfig b/drivers/ieee1394/Kconfig index 545663e..95f45f9 100644 --- a/drivers/ieee1394/Kconfig +++ b/drivers/ieee1394/Kconfig @@ -4,7 +4,7 @@ menu "IEEE 1394 (FireWire) support" source "drivers/firewire/Kconfig" config IEEE1394 - tristate "IEEE 1394 (FireWire) support" + tristate "Stable FireWire stack" depends on PCI || BROKEN help IEEE 1394 describes a high performance serial bus, which is also @@ -19,30 +19,45 @@ config IEEE1394 To compile this driver as a module, say M here: the module will be called ieee1394. -comment "Subsystem Options" - depends on IEEE1394 - -config IEEE1394_VERBOSEDEBUG - bool "Excessive debugging output" - depends on IEEE1394 +config IEEE1394_OHCI1394 + tristate "OHCI-1394 controllers" + depends on PCI && IEEE1394 help - If you say Y here, you will get very verbose debugging logs from - the subsystem which includes a dump of the header of every sent - and received packet. This can amount to a high amount of data - collected in a very short time which is usually also saved to - disk by the system logging daemons. + Enable this driver if you have an IEEE 1394 controller based on the + OHCI-1394 specification. The current driver is only tested with OHCI + chipsets made by Texas Instruments and NEC. Most third-party vendors + use one of these chipsets. It should work with any OHCI-1394 + compliant card, however. - Say Y if you really want or need the debugging output, everyone - else says N. + To compile this driver as a module, say M here: the + module will be called ohci1394. -comment "Controllers" - depends on IEEE1394 + NOTE: -comment "Texas Instruments PCILynx requires I2C" + You should only build either ohci1394 or the new firewire-ohci driver, + but not both. If you nevertheless want to install both, you should + configure them only as modules and blacklist the driver(s) which you + don't want to have auto-loaded. Add either + + blacklist firewire-ohci + or + blacklist ohci1394 + blacklist video1394 + blacklist dv1394 + + to /etc/modprobe.conf or /etc/modprobe.d/* and update modprobe.conf + depending on your distribution. The latter two modules should be + blacklisted together with ohci1394 because they depend on ohci1394. + + If you have an old modprobe which doesn't implement the blacklist + directive, use "install modulename /bin/true" for the modules to be + blacklisted. + +comment "PCILynx controller requires I2C" depends on IEEE1394 && I2C=n config IEEE1394_PCILYNX - tristate "Texas Instruments PCILynx support" + tristate "PCILynx controller" depends on PCI && IEEE1394 && I2C select I2C_ALGOBIT help @@ -57,35 +72,11 @@ config IEEE1394_PCILYNX PowerMacs G3 B&W contain the PCILynx controller. Therefore almost everybody can say N here. -config IEEE1394_OHCI1394 - tristate "OHCI-1394 support" - depends on PCI && IEEE1394 - help - Enable this driver if you have an IEEE 1394 controller based on the - OHCI-1394 specification. The current driver is only tested with OHCI - chipsets made by Texas Instruments and NEC. Most third-party vendors - use one of these chipsets. It should work with any OHCI-1394 - compliant card, however. - - To compile this driver as a module, say M here: the - module will be called ohci1394. - -comment "Protocols" - depends on IEEE1394 - -config IEEE1394_VIDEO1394 - tristate "OHCI-1394 Video support" - depends on IEEE1394 && IEEE1394_OHCI1394 - help - This option enables video device usage for OHCI-1394 cards. Enable - this option only if you have an IEEE 1394 video device connected to - an OHCI-1394 card. - comment "SBP-2 support (for storage devices) requires SCSI" depends on IEEE1394 && SCSI=n config IEEE1394_SBP2 - tristate "SBP-2 support (Harddisks etc.)" + tristate "Storage devices (SBP-2 protocol)" depends on IEEE1394 && SCSI help This option enables you to use SBP-2 devices connected to an IEEE @@ -127,24 +118,47 @@ config IEEE1394_ETH1394 The module is called eth1394 although it does not emulate Ethernet. +config IEEE1394_RAWIO + tristate "raw1394 userspace interface" + depends on IEEE1394 + help + This option adds support for the raw1394 device file which enables + direct communication of user programs with IEEE 1394 devices + (isochronous and asynchronous). Almost all application programs + which access FireWire require this option. + + To compile this driver as a module, say M here: the module will be + called raw1394. + +config IEEE1394_VIDEO1394 + tristate "video1394 userspace interface" + depends on IEEE1394 && IEEE1394_OHCI1394 + help + This option adds support for the video1394 device files which enable + isochronous communication of user programs with IEEE 1394 devices, + especially video capture or export. This interface is used by all + libdc1394 based programs and by several other programs, in addition to + the raw1394 interface. It is generally not required for DV capture. + + To compile this driver as a module, say M here: the module will be + called video1394. + config IEEE1394_DV1394 - tristate "OHCI-DV I/O support (deprecated)" + tristate "dv1394 userspace interface (deprecated)" depends on IEEE1394 && IEEE1394_OHCI1394 help The dv1394 driver is unsupported and may be removed from Linux in a future release. Its functionality is now provided by raw1394 together with libraries such as libiec61883. -config IEEE1394_RAWIO - tristate "Raw IEEE1394 I/O support" +config IEEE1394_VERBOSEDEBUG + bool "Excessive debugging output" depends on IEEE1394 help - This option adds support for the raw1394 device file which enables - direct communication of user programs with the IEEE 1394 bus and thus - with the attached peripherals. Almost all application programs which - access FireWire require this option. + If you say Y here, you will get very verbose debugging logs from the + ieee1394 drivers, including sent and received packet headers. This + will quickly result in large amounts of data sent to the system log. - To compile this driver as a module, say M here: the module will be - called raw1394. + Say Y if you really need the debugging output. Everyone else says N. endmenu -- cgit v0.10.2 From fb77bcef9f7be78e3e11543cb5abbcb1b1fac53e Mon Sep 17 00:00:00 2001 From: Jack Morgenstein Date: Wed, 18 Jun 2008 15:36:38 -0700 Subject: IB/uverbs: Fix check of is_closed flag check in ib_uverbs_async_handler() Commit 1ae5c187 ("IB/uverbs: Don't store struct file * for event files") changed the way that closed files are handled in the uverbs code. However, after the conversion, is_closed flag is checked incorrectly in ib_uverbs_async_handler(). As a result, no async events are ever passed to applications. Found by: Ronni Zimmerman Signed-off-by: Jack Morgenstein Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/core/uverbs_main.c b/drivers/infiniband/core/uverbs_main.c index f806da1..caed42b 100644 --- a/drivers/infiniband/core/uverbs_main.c +++ b/drivers/infiniband/core/uverbs_main.c @@ -423,7 +423,7 @@ static void ib_uverbs_async_handler(struct ib_uverbs_file *file, unsigned long flags; spin_lock_irqsave(&file->async_file->lock, flags); - if (!file->async_file->is_closed) { + if (file->async_file->is_closed) { spin_unlock_irqrestore(&file->async_file->lock, flags); return; } -- cgit v0.10.2 From ef3a62d272f033989e83eb1f26505f93f93e3e69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 18 Jun 2008 15:39:48 -0700 Subject: mac80211: detect driver tx bugs When a driver rejects a frame in it's ->tx() callback, it must also stop queues, otherwise mac80211 can go into a loop here. Detect this situation and abort the loop after five retries, warning about the driver bug. Signed-off-by: Johannes Berg Signed-off-by: David S. Miller diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 28d8bd5..c80d589 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1132,7 +1132,7 @@ static int ieee80211_tx(struct net_device *dev, struct sk_buff *skb, ieee80211_tx_handler *handler; struct ieee80211_tx_data tx; ieee80211_tx_result res = TX_DROP, res_prepare; - int ret, i; + int ret, i, retries = 0; WARN_ON(__ieee80211_queue_pending(local, control->queue)); @@ -1216,6 +1216,13 @@ retry: if (!__ieee80211_queue_stopped(local, control->queue)) { clear_bit(IEEE80211_LINK_STATE_PENDING, &local->state[control->queue]); + retries++; + /* + * Driver bug, it's rejecting packets but + * not stopping queues. + */ + if (WARN_ON_ONCE(retries > 5)) + goto drop; goto retry; } memcpy(&store->control, control, -- cgit v0.10.2 From dcd981a77b2b35d169656d4b9cee208096ed7ccf Mon Sep 17 00:00:00 2001 From: Greg KH Date: Thu, 19 Jun 2008 09:52:26 +1000 Subject: agp/via: fixup pci ids add a new PCI ID and remove an old dodgy one, include the explaination in the commented code so nobody readds later. (davej also sent the pci id addition). Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/via-agp.c b/drivers/char/agp/via-agp.c index 0ecc54d..7b36476 100644 --- a/drivers/char/agp/via-agp.c +++ b/drivers/char/agp/via-agp.c @@ -389,11 +389,20 @@ static struct agp_device_ids via_agp_device_ids[] __devinitdata = .device_id = PCI_DEVICE_ID_VIA_VT3324, .chipset_name = "CX700", }, - /* VT3336 */ + /* VT3336 - this is a chipset for AMD Athlon/K8 CPU. Due to K8's unique + * architecture, the AGP resource and behavior are different from + * the traditional AGP which resides only in chipset. AGP is used + * by 3D driver which wasn't available for the VT3336 and VT3364 + * generation until now. Unfortunately, by testing, VT3364 works + * but VT3336 doesn't. - explaination from via, just leave this as + * as a placeholder to avoid future patches adding it back in. + */ +#if 0 { .device_id = PCI_DEVICE_ID_VIA_VT3336, .chipset_name = "VT3336", }, +#endif /* P4M890 */ { .device_id = PCI_DEVICE_ID_VIA_P4M890, @@ -546,8 +555,8 @@ static const struct pci_device_id agp_via_pci_table[] = { ID(PCI_DEVICE_ID_VIA_3296_0), ID(PCI_DEVICE_ID_VIA_P4M800CE), ID(PCI_DEVICE_ID_VIA_VT3324), - ID(PCI_DEVICE_ID_VIA_VT3336), ID(PCI_DEVICE_ID_VIA_P4M890), + ID(PCI_DEVICE_ID_VIA_VT3364), { } }; -- cgit v0.10.2 From da503fa60b84d5945deb3ab74efdd0bec61df4a1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Wed, 18 Jun 2008 09:28:00 +0100 Subject: agp: two-stage page destruction issue besides it apparently being useful only in 2.6.24 (the changes in 2.6.25 really mean that it could be converted back to a single-stage mechanism), I'm seeing an issue in Xen Dom0 kernels, which is caused by the calling of gart_to_virt() in the second stage invocations of the destroy function. I think that besides this being a real issue with Xen (where unmap_page_from_agp() is not just a page table attribute change), this also is invalid from a theoretical perspective: One should not assume that gart_to_virt() is still valid after unmapping a page. So minimally (keeping the 2-stage mechanism) a patch like the one below would be needed. Jan Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/backend.c b/drivers/char/agp/backend.c index b1bdd01..1ec8710 100644 --- a/drivers/char/agp/backend.c +++ b/drivers/char/agp/backend.c @@ -188,10 +188,10 @@ static int agp_backend_initialize(struct agp_bridge_data *bridge) err_out: if (bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } if (got_gatt) bridge->driver->free_gatt_table(bridge); @@ -215,10 +215,10 @@ static void agp_backend_cleanup(struct agp_bridge_data *bridge) if (bridge->driver->agp_destroy_page && bridge->driver->needs_scratch_page) { - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_UNMAP); - bridge->driver->agp_destroy_page(gart_to_virt(bridge->scratch_page_real), - AGP_PAGE_DESTROY_FREE); + void *va = gart_to_virt(bridge->scratch_page_real); + + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); + bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } } diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 7fc0c99..b6650a6 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -202,10 +202,13 @@ void agp_free_memory(struct agp_memory *curr) } if (curr->page_count != 0) { for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_UNMAP); + curr->memory[i] = (unsigned long)gart_to_virt(curr->memory[i]); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_UNMAP); } for (i = 0; i < curr->page_count; i++) { - curr->bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[i]), AGP_PAGE_DESTROY_FREE); + curr->bridge->driver->agp_destroy_page((void *)curr->memory[i], + AGP_PAGE_DESTROY_FREE); } } agp_free_key(curr->key); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index eeea50a..01b0340 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -418,9 +418,11 @@ static void intel_i810_free_by_type(struct agp_memory *curr) if (curr->page_count == 4) i8xx_destroy_pages(gart_to_virt(curr->memory[0])); else { - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + void *va = gart_to_virt(curr->memory[0]); + + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_UNMAP); - agp_bridge->driver->agp_destroy_page(gart_to_virt(curr->memory[0]), + agp_bridge->driver->agp_destroy_page(va, AGP_PAGE_DESTROY_FREE); } agp_free_page_array(curr); -- cgit v0.10.2 From c72580129209aaa509ace81c1f2ee1caa9c9774b Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 26 Mar 2008 14:10:02 -0700 Subject: drivers/char/agp - use bool Use boolean in AGP instead of having own TRUE/FALSE -- Signed-off-by: Joe Perches Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/agp.h b/drivers/char/agp/agp.h index 99e6a40..81e14be 100644 --- a/drivers/char/agp/agp.h +++ b/drivers/char/agp/agp.h @@ -99,8 +99,8 @@ struct agp_bridge_driver { const void *aperture_sizes; int num_aperture_sizes; enum aper_size_type size_type; - int cant_use_aperture; - int needs_scratch_page; + bool cant_use_aperture; + bool needs_scratch_page; const struct gatt_mask *masks; int (*fetch_size)(void); int (*configure)(void); @@ -278,7 +278,7 @@ void agp_generic_destroy_page(void *addr, int flags); void agp_free_key(int key); int agp_num_entries(void); u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 mode, u32 command); -void agp_device_command(u32 command, int agp_v3); +void agp_device_command(u32 command, bool agp_v3); int agp_3_5_enable(struct agp_bridge_data *bridge); void global_cache_flush(void); void get_agp_version(struct agp_bridge_data *bridge); diff --git a/drivers/char/agp/alpha-agp.c b/drivers/char/agp/alpha-agp.c index e77c178..5da89f6 100644 --- a/drivers/char/agp/alpha-agp.c +++ b/drivers/char/agp/alpha-agp.c @@ -80,7 +80,7 @@ static void alpha_core_agp_enable(struct agp_bridge_data *bridge, u32 mode) agp->mode.bits.enable = 1; agp->ops->configure(agp); - agp_device_command(agp->mode.lw, 0); + agp_device_command(agp->mode.lw, false); } static int alpha_core_agp_insert_memory(struct agp_memory *mem, off_t pg_start, @@ -126,7 +126,7 @@ struct agp_bridge_driver alpha_core_agp_driver = { .aperture_sizes = alpha_core_agp_sizes, .num_aperture_sizes = 1, .size_type = FIXED_APER_SIZE, - .cant_use_aperture = 1, + .cant_use_aperture = true, .masks = NULL, .fetch_size = alpha_core_agp_fetch_size, diff --git a/drivers/char/agp/amd-k7-agp.c b/drivers/char/agp/amd-k7-agp.c index 96bdb92..39a0718 100644 --- a/drivers/char/agp/amd-k7-agp.c +++ b/drivers/char/agp/amd-k7-agp.c @@ -314,9 +314,9 @@ static int amd_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/amd64-agp.c b/drivers/char/agp/amd64-agp.c index d8200ac..13665db 100644 --- a/drivers/char/agp/amd64-agp.c +++ b/drivers/char/agp/amd64-agp.c @@ -90,9 +90,9 @@ static int amd64_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/ati-agp.c b/drivers/char/agp/ati-agp.c index 07b4d8f..3a4566c 100644 --- a/drivers/char/agp/ati-agp.c +++ b/drivers/char/agp/ati-agp.c @@ -287,10 +287,10 @@ static int ati_insert_memory(struct agp_memory * mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { /*CACHE_FLUSH(); */ global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/efficeon-agp.c b/drivers/char/agp/efficeon-agp.c index cac0009..8ca6f26 100644 --- a/drivers/char/agp/efficeon-agp.c +++ b/drivers/char/agp/efficeon-agp.c @@ -249,9 +249,9 @@ static int efficeon_insert_memory(struct agp_memory * mem, off_t pg_start, int t if (type != 0 || mem->type != 0) return -EINVAL; - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } last_page = NULL; @@ -329,7 +329,7 @@ static const struct agp_bridge_driver efficeon_driver = { .free_gatt_table = efficeon_free_gatt_table, .insert_memory = efficeon_insert_memory, .remove_memory = efficeon_remove_memory, - .cant_use_aperture = 0, // 1 might be faster? + .cant_use_aperture = false, // true might be faster? // Generic .alloc_by_type = agp_generic_alloc_by_type, diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index b6650a6..3e3625a 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -188,7 +188,7 @@ void agp_free_memory(struct agp_memory *curr) if (curr == NULL) return; - if (curr->is_bound == TRUE) + if (curr->is_bound) agp_unbind_memory(curr); if (curr->type >= AGP_USER_TYPES) { @@ -414,20 +414,20 @@ int agp_bind_memory(struct agp_memory *curr, off_t pg_start) if (curr == NULL) return -EINVAL; - if (curr->is_bound == TRUE) { + if (curr->is_bound) { printk(KERN_INFO PFX "memory %p is already bound!\n", curr); return -EINVAL; } - if (curr->is_flushed == FALSE) { + if (!curr->is_flushed) { curr->bridge->driver->cache_flush(); - curr->is_flushed = TRUE; + curr->is_flushed = true; } ret_val = curr->bridge->driver->insert_memory(curr, pg_start, curr->type); if (ret_val != 0) return ret_val; - curr->is_bound = TRUE; + curr->is_bound = true; curr->pg_start = pg_start; return 0; } @@ -449,7 +449,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (curr == NULL) return -EINVAL; - if (curr->is_bound != TRUE) { + if (!curr->is_bound) { printk(KERN_INFO PFX "memory %p was not bound!\n", curr); return -EINVAL; } @@ -459,7 +459,7 @@ int agp_unbind_memory(struct agp_memory *curr) if (ret_val != 0) return ret_val; - curr->is_bound = FALSE; + curr->is_bound = false; curr->pg_start = 0; return 0; } @@ -757,7 +757,7 @@ u32 agp_collect_device_status(struct agp_bridge_data *bridge, u32 requested_mode EXPORT_SYMBOL(agp_collect_device_status); -void agp_device_command(u32 bridge_agpstat, int agp_v3) +void agp_device_command(u32 bridge_agpstat, bool agp_v3) { struct pci_dev *device = NULL; int mode; @@ -821,7 +821,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) /* If we have 3.5, we can do the isoch stuff. */ if (bridge->minor_version >= 5) agp_3_5_enable(bridge); - agp_device_command(bridge_agpstat, TRUE); + agp_device_command(bridge_agpstat, true); return; } else { /* Disable calibration cycle in RX91<1> when not in AGP3.0 mode of operation.*/ @@ -838,7 +838,7 @@ void agp_generic_enable(struct agp_bridge_data *bridge, u32 requested_mode) } /* AGP v<3 */ - agp_device_command(bridge_agpstat, FALSE); + agp_device_command(bridge_agpstat, false); } EXPORT_SYMBOL(agp_generic_enable); @@ -1086,9 +1086,9 @@ int agp_generic_insert_memory(struct agp_memory * mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { diff --git a/drivers/char/agp/hp-agp.c b/drivers/char/agp/hp-agp.c index cbb0444..80d7317 100644 --- a/drivers/char/agp/hp-agp.c +++ b/drivers/char/agp/hp-agp.c @@ -353,9 +353,9 @@ hp_zx1_insert_memory (struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -437,7 +437,7 @@ const struct agp_bridge_driver hp_zx1_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/i460-agp.c b/drivers/char/agp/i460-agp.c index 76f581c..e587eeb 100644 --- a/drivers/char/agp/i460-agp.c +++ b/drivers/char/agp/i460-agp.c @@ -580,7 +580,7 @@ const struct agp_bridge_driver intel_i460_driver = { .alloc_by_type = agp_generic_alloc_by_type, .free_by_type = agp_generic_free_by_type, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __devinit agp_intel_i460_probe(struct pci_dev *pdev, diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 01b0340..6800b7e 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1658,7 +1658,7 @@ static const struct agp_bridge_driver intel_810_driver = { .aperture_sizes = intel_i810_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 2, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i810_configure, .fetch_size = intel_i810_fetch_size, .cleanup = intel_i810_cleanup, @@ -1707,7 +1707,7 @@ static const struct agp_bridge_driver intel_830_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i830_configure, .fetch_size = intel_i830_fetch_size, .cleanup = intel_i830_cleanup, @@ -1878,7 +1878,7 @@ static const struct agp_bridge_driver intel_915_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, @@ -1904,7 +1904,7 @@ static const struct agp_bridge_driver intel_i965_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, @@ -1954,7 +1954,7 @@ static const struct agp_bridge_driver intel_g33_driver = { .aperture_sizes = intel_i830_sizes, .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, - .needs_scratch_page = TRUE, + .needs_scratch_page = true, .configure = intel_i915_configure, .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, diff --git a/drivers/char/agp/nvidia-agp.c b/drivers/char/agp/nvidia-agp.c index 225ed2a..eaceb61 100644 --- a/drivers/char/agp/nvidia-agp.c +++ b/drivers/char/agp/nvidia-agp.c @@ -214,9 +214,9 @@ static int nvidia_insert_memory(struct agp_memory *mem, off_t pg_start, int type return -EBUSY; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { writel(agp_bridge->driver->mask_memory(agp_bridge, diff --git a/drivers/char/agp/parisc-agp.c b/drivers/char/agp/parisc-agp.c index 2939e35..8c42dcc 100644 --- a/drivers/char/agp/parisc-agp.c +++ b/drivers/char/agp/parisc-agp.c @@ -141,9 +141,9 @@ parisc_agp_insert_memory(struct agp_memory *mem, off_t pg_start, int type) j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = io_pg_start; i < mem->page_count; i++) { @@ -226,7 +226,7 @@ static const struct agp_bridge_driver parisc_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; static int __init diff --git a/drivers/char/agp/sgi-agp.c b/drivers/char/agp/sgi-agp.c index 98cf8ab..b972d83 100644 --- a/drivers/char/agp/sgi-agp.c +++ b/drivers/char/agp/sgi-agp.c @@ -182,9 +182,9 @@ static int sgi_tioca_insert_memory(struct agp_memory *mem, off_t pg_start, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { bridge->driver->cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -264,8 +264,8 @@ const struct agp_bridge_driver sgi_tioca_driver = { .agp_alloc_page = sgi_tioca_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 0, + .cant_use_aperture = true, + .needs_scratch_page = false, .num_aperture_sizes = 1, }; diff --git a/drivers/char/agp/sworks-agp.c b/drivers/char/agp/sworks-agp.c index e08934e..0e054c1 100644 --- a/drivers/char/agp/sworks-agp.c +++ b/drivers/char/agp/sworks-agp.c @@ -339,9 +339,9 @@ static int serverworks_insert_memory(struct agp_memory *mem, j++; } - if (mem->is_flushed == FALSE) { + if (!mem->is_flushed) { global_cache_flush(); - mem->is_flushed = TRUE; + mem->is_flushed = true; } for (i = 0, j = pg_start; i < mem->page_count; i++, j++) { @@ -412,7 +412,7 @@ static void serverworks_agp_enable(struct agp_bridge_data *bridge, u32 mode) bridge->capndx + PCI_AGP_COMMAND, command); - agp_device_command(command, 0); + agp_device_command(command, false); } static const struct agp_bridge_driver sworks_driver = { diff --git a/drivers/char/agp/uninorth-agp.c b/drivers/char/agp/uninorth-agp.c index 42c0a60..d2fa3cf 100644 --- a/drivers/char/agp/uninorth-agp.c +++ b/drivers/char/agp/uninorth-agp.c @@ -281,10 +281,10 @@ static void uninorth_agp_enable(struct agp_bridge_data *bridge, u32 mode) if (uninorth_rev >= 0x30) { /* This is an AGP V3 */ - agp_device_command(command, (status & AGPSTAT_MODE_3_0)); + agp_device_command(command, (status & AGPSTAT_MODE_3_0) != 0); } else { /* AGP V2 */ - agp_device_command(command, 0); + agp_device_command(command, false); } uninorth_tlbflush(NULL); @@ -511,7 +511,7 @@ const struct agp_bridge_driver uninorth_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, + .cant_use_aperture = true, }; const struct agp_bridge_driver u3_agp_driver = { @@ -536,8 +536,8 @@ const struct agp_bridge_driver u3_agp_driver = { .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, .agp_type_to_mask_type = agp_generic_type_to_mask_type, - .cant_use_aperture = 1, - .needs_scratch_page = 1, + .cant_use_aperture = true, + .needs_scratch_page = true, }; static struct agp_device_ids uninorth_agp_device_ids[] __devinitdata = { diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 661d90d..09b4478 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -30,14 +30,6 @@ #ifndef _AGP_BACKEND_H #define _AGP_BACKEND_H 1 -#ifndef TRUE -#define TRUE 1 -#endif - -#ifndef FALSE -#define FALSE 0 -#endif - enum chipset_type { NOT_SUPPORTED, SUPPORTED, @@ -57,7 +49,7 @@ struct agp_kern_info { size_t aper_size; int max_memory; /* In pages */ int current_memory; - int cant_use_aperture; + bool cant_use_aperture; unsigned long page_mask; struct vm_operations_struct *vm_ops; }; @@ -83,8 +75,8 @@ struct agp_memory { off_t pg_start; u32 type; u32 physical; - u8 is_bound; - u8 is_flushed; + bool is_bound; + bool is_flushed; u8 vmalloc_flag; }; -- cgit v0.10.2 From d799e083a80b220f3681d7790f11e77d1704022b Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:46:30 +0900 Subject: ahci: jmb361 has only one port JMB361 has only one port but reports it has two causing longish probe failure on the second one. Quirk it. Reported by Gajo Petrovic in bz 10911. Signed-off-by: Tejun Heo Cc: Gajo Petrovic Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 966ab40..29f34d0 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -653,6 +653,14 @@ static void ahci_save_initial_config(struct pci_dev *pdev, cap &= ~HOST_CAP_PMP; } + if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361 && + port_map != 1) { + dev_printk(KERN_INFO, &pdev->dev, + "JMB361 has only one port, port_map 0x%x -> 0x%x\n", + port_map, 1); + port_map = 1; + } + /* * Temporary Marvell 6145 hack: PATA port presence * is asserted through the standard AHCI port -- cgit v0.10.2 From 5895ef9a5b746e7cc9ebda50c87fbd11562da0a4 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 17 Jun 2008 12:36:26 +0900 Subject: libata: don't check whether to use DMA or not for no data commands There's no reason to check whether to use DMA or not for no data commands. Don't do it. While at it, make local variable using_pio in atapi_xlat() set iff ATAPI_PROT_PIO is going to be used and rename ata_check_atapi_dma() to atapi_check_dma() for consistency. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index cc816ca..303fc0d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -4297,7 +4297,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) } /** - * ata_check_atapi_dma - Check whether ATAPI DMA can be supported + * atapi_check_dma - Check whether ATAPI DMA can be supported * @qc: Metadata associated with taskfile to check * * Allow low-level driver to filter ATA PACKET commands, returning @@ -4310,7 +4310,7 @@ void ata_sg_clean(struct ata_queued_cmd *qc) * RETURNS: 0 when ATAPI DMA can be used * nonzero otherwise */ -int ata_check_atapi_dma(struct ata_queued_cmd *qc) +int atapi_check_dma(struct ata_queued_cmd *qc) { struct ata_port *ap = qc->ap; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index 2e6e162..57a4364 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -2343,8 +2343,8 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) { struct scsi_cmnd *scmd = qc->scsicmd; struct ata_device *dev = qc->dev; - int using_pio = (dev->flags & ATA_DFLAG_PIO); int nodata = (scmd->sc_data_direction == DMA_NONE); + int using_pio = !nodata && (dev->flags & ATA_DFLAG_PIO); unsigned int nbytes; memset(qc->cdb, 0, dev->cdb_len); @@ -2362,7 +2362,7 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) ata_qc_set_pc_nbytes(qc); /* check whether ATAPI DMA is safe */ - if (!using_pio && ata_check_atapi_dma(qc)) + if (!nodata && !using_pio && atapi_check_dma(qc)) using_pio = 1; /* Some controller variants snoop this value for Packet @@ -2402,13 +2402,11 @@ static unsigned int atapi_xlat(struct ata_queued_cmd *qc) qc->tf.lbam = (nbytes & 0xFF); qc->tf.lbah = (nbytes >> 8); - if (using_pio || nodata) { - /* no data, or PIO data xfer */ - if (nodata) - qc->tf.protocol = ATAPI_PROT_NODATA; - else - qc->tf.protocol = ATAPI_PROT_PIO; - } else { + if (nodata) + qc->tf.protocol = ATAPI_PROT_NODATA; + else if (using_pio) + qc->tf.protocol = ATAPI_PROT_PIO; + else { /* DMA data xfer */ qc->tf.protocol = ATAPI_PROT_DMA; qc->tf.feature |= ATAPI_PKT_DMA; diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 4514283..1cf803a 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -106,7 +106,7 @@ extern void ata_sg_clean(struct ata_queued_cmd *qc); extern void ata_qc_free(struct ata_queued_cmd *qc); extern void ata_qc_issue(struct ata_queued_cmd *qc); extern void __ata_qc_complete(struct ata_queued_cmd *qc); -extern int ata_check_atapi_dma(struct ata_queued_cmd *qc); +extern int atapi_check_dma(struct ata_queued_cmd *qc); extern void swap_buf_le16(u16 *buf, unsigned int buf_words); extern void ata_dev_init(struct ata_device *dev); extern void ata_link_init(struct ata_port *ap, struct ata_link *link, int pmp); -- cgit v0.10.2 From 3bd0a70ee9cc30ae81b39cb5ecad0fa7bcb4675b Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:11:16 -0400 Subject: sata_mv: enable async_notify for 60x1 Rev.C0 and higher The early chipsets cannot safely handle Async Notification (AN), but 6041/6081 chip revision "C0" (and newer) can handle it. So allow AN for "C0" and higher. This enables use of hotplug on PMP ports for the 6041/6081 PCI Rev.9 chips. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 60391e9..75fde48 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1322,6 +1322,9 @@ static int mv_port_start(struct ata_port *ap) goto out_port_free_dma_mem; memset(pp->crpb, 0, MV_CRPB_Q_SZ); + /* 6041/6081 Rev. "C0" (and newer) are okay with async notify */ + if (hpriv->hp_flags & MV_HP_ERRATA_60X1C0) + ap->flags |= ATA_FLAG_AN; /* * For GEN_I, there's no NCQ, so we only allocate a single sg_tbl. * For later hardware, we need one unique sg_tbl per NCQ tag. -- cgit v0.10.2 From c6112bd86bc8f727bb732a47f2133e0ff12beda9 Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 12:13:02 -0400 Subject: sata_mv: warn on PIO with multiple DRQs Chip errata sometimes prevents reliable use of PIO commands which involve more than a single DRQ (data request). In normal operation, libata should not generate such PIO commands (uses DMA instead), but they could be sent in via SG_IO from userspace. A full workaround might be to break up such commands into sequences of single DRQ ones, but that's just way too complex for something that doesn't normally happen in real life. So, allow the attempt (it often works, despite the errata), but log the event for reference when somebody screams. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 75fde48..28092bc 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1595,6 +1595,24 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) if ((qc->tf.protocol != ATA_PROT_DMA) && (qc->tf.protocol != ATA_PROT_NCQ)) { + static int limit_warnings = 10; + /* + * Errata SATA#16, SATA#24: warn if multiple DRQs expected. + * + * Someday, we might implement special polling workarounds + * for these, but it all seems rather unnecessary since we + * normally use only DMA for commands which transfer more + * than a single block of data. + * + * Much of the time, this could just work regardless. + * So for now, just log the incident, and allow the attempt. + */ + if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + --limit_warnings; + ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME + ": attempting PIO w/multiple DRQ: " + "this may fail due to h/w errata\n"); + } /* * We're about to send a non-EDMA capable command to the * port. Turn off EDMA so there won't be problems accessing -- cgit v0.10.2 From cc18e0fea7907e7a96b7df71b81838d518bc074e Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Mon, 16 Jun 2008 12:16:26 +0100 Subject: LIBATA: Add HAVE_PATA_PLATFORM to select PATA_PLATFORM driver Add HAVE_PATA_PLATFORM to select the pata platform driver to ensure that we do not end up with a long 'depends on' list when other users of this driver turn up. Signed-off-by: Ben Dooks Signed-off-by: Jeff Garzik diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 9bf2986..ae84949 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -651,9 +651,17 @@ config PATA_WINBOND_VLB Support for the Winbond W83759A controller on Vesa Local Bus systems. +config HAVE_PATA_PLATFORM + bool + help + This is an internal configuration node for any machine that + uses pata-platform driver to enable the relevant driver in the + configuration structure without having to submit endless patches + to update the PATA_PLATFORM entry. + config PATA_PLATFORM tristate "Generic platform device PATA support" - depends on EMBEDDED || ARCH_RPC || PPC + depends on EMBEDDED || ARCH_RPC || PPC || HAVE_PATA_PLATFORM help This option enables support for generic directly connected ATA devices commonly found on embedded systems. -- cgit v0.10.2 From 040dee53a724f54d47876674d50184873364f207 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 13 Jun 2008 18:05:02 +0900 Subject: ata_piix: add TECRA M4 to broken suspend list TOSHIBA also used "TECRA M4" in additon to "Tecra M4", add it. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 81b7ae3..a90ae03 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1043,6 +1043,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "TECRA M4", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M4"), + }, + }, + { .ident = "TECRA M5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), -- cgit v0.10.2 From 9516b030b484fc99cf24213caf88df01f99248dd Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 10:42:17 +1000 Subject: agp: more boolean conversions. Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/compat_ioctl.c b/drivers/char/agp/compat_ioctl.c index 3927579..58c57cb 100644 --- a/drivers/char/agp/compat_ioctl.c +++ b/drivers/char/agp/compat_ioctl.c @@ -214,7 +214,7 @@ long compat_agp_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE32)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/frontend.c b/drivers/char/agp/frontend.c index 857b262..e6cb1ab 100644 --- a/drivers/char/agp/frontend.c +++ b/drivers/char/agp/frontend.c @@ -395,7 +395,7 @@ static int agp_remove_controller(struct agp_controller *controller) if (agp_fe.current_controller == controller) { agp_fe.current_controller = NULL; - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); } kfree(controller); @@ -443,7 +443,7 @@ static void agp_controller_release_current(struct agp_controller *controller, } agp_fe.current_controller = NULL; - agp_fe.used_by_controller = FALSE; + agp_fe.used_by_controller = false; agp_backend_release(agp_bridge); } @@ -573,7 +573,7 @@ static int agp_mmap(struct file *file, struct vm_area_struct *vma) mutex_lock(&(agp_fe.agp_mutex)); - if (agp_fe.backend_acquired != TRUE) + if (agp_fe.backend_acquired != true) goto out_eperm; if (!(test_bit(AGP_FF_IS_VALID, &priv->access_flags))) @@ -768,7 +768,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) atomic_inc(&agp_bridge->agp_in_use); - agp_fe.backend_acquired = TRUE; + agp_fe.backend_acquired = true; controller = agp_find_controller_by_pid(priv->my_pid); @@ -778,7 +778,7 @@ int agpioc_acquire_wrap(struct agp_file_private *priv) controller = agp_create_controller(priv->my_pid); if (controller == NULL) { - agp_fe.backend_acquired = FALSE; + agp_fe.backend_acquired = false; agp_backend_release(agp_bridge); return -ENOMEM; } @@ -981,7 +981,7 @@ static long agp_ioctl(struct file *file, ret_val = -EINVAL; goto ioctl_out; } - if ((agp_fe.backend_acquired != TRUE) && + if ((agp_fe.backend_acquired != true) && (cmd != AGPIOC_ACQUIRE)) { ret_val = -EBUSY; goto ioctl_out; diff --git a/drivers/char/agp/generic.c b/drivers/char/agp/generic.c index 3e3625a..564daaa 100644 --- a/drivers/char/agp/generic.c +++ b/drivers/char/agp/generic.c @@ -96,13 +96,13 @@ EXPORT_SYMBOL(agp_flush_chipset); void agp_alloc_page_array(size_t size, struct agp_memory *mem) { mem->memory = NULL; - mem->vmalloc_flag = 0; + mem->vmalloc_flag = false; if (size <= 2*PAGE_SIZE) mem->memory = kmalloc(size, GFP_KERNEL | __GFP_NORETRY); if (mem->memory == NULL) { mem->memory = vmalloc(size); - mem->vmalloc_flag = 1; + mem->vmalloc_flag = true; } } EXPORT_SYMBOL(agp_alloc_page_array); diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 6800b7e..0235659 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -325,7 +325,7 @@ static int intel_i810_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -795,7 +795,7 @@ static int intel_i830_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } @@ -1022,7 +1022,7 @@ static int intel_i915_insert_entries(struct agp_memory *mem, off_t pg_start, out: ret = 0; out_err: - mem->is_flushed = 1; + mem->is_flushed = true; return ret; } diff --git a/include/linux/agp_backend.h b/include/linux/agp_backend.h index 09b4478..972b12b 100644 --- a/include/linux/agp_backend.h +++ b/include/linux/agp_backend.h @@ -77,7 +77,7 @@ struct agp_memory { u32 physical; bool is_bound; bool is_flushed; - u8 vmalloc_flag; + bool vmalloc_flag; }; #define AGP_NORMAL_MEMORY 0 diff --git a/include/linux/agpgart.h b/include/linux/agpgart.h index 62aef58..c8fdb6e 100644 --- a/include/linux/agpgart.h +++ b/include/linux/agpgart.h @@ -206,8 +206,8 @@ struct agp_front_data { struct agp_controller *current_controller; struct agp_controller *controllers; struct agp_file_private *file_priv_list; - u8 used_by_controller; - u8 backend_acquired; + bool used_by_controller; + bool backend_acquired; }; #endif /* __KERNEL__ */ -- cgit v0.10.2 From 9a3b103c27a7e3199b917bc3ca219530132afdfc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 18 Jun 2008 20:56:58 -0400 Subject: ahci: sis can't do PMP From: Piter PUNK SiS AHCIs say they can do PMP but can't and fail detection if SRST w/ pmp==15 is used. Turn off PMP support. tj: added patch description, adapted patch to #upstream-fixes and renamed board_ahci_sis to board_ahci_nopmp. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 29f34d0..6a4a2a2 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -90,6 +90,7 @@ enum { board_ahci_mv = 4, board_ahci_sb700 = 5, board_ahci_mcp65 = 6, + board_ahci_nopmp = 7, /* global controller registers */ HOST_CAP = 0x00, /* host capabilities */ @@ -401,6 +402,14 @@ static const struct ata_port_info ahci_port_info[] = { .udma_mask = ATA_UDMA6, .port_ops = &ahci_ops, }, + /* board_ahci_nopmp */ + { + AHCI_HFLAGS (AHCI_HFLAG_NO_PMP), + .flags = AHCI_FLAG_COMMON, + .pio_mask = 0x1f, /* pio0-4 */ + .udma_mask = ATA_UDMA6, + .port_ops = &ahci_ops, + }, }; static const struct pci_device_id ahci_pci_tbl[] = { @@ -525,9 +534,9 @@ static const struct pci_device_id ahci_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, 0x0bc7), board_ahci }, /* MCP7B */ /* SiS */ - { PCI_VDEVICE(SI, 0x1184), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x1185), board_ahci }, /* SiS 966 */ - { PCI_VDEVICE(SI, 0x0186), board_ahci }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x1184), board_ahci_nopmp }, /* SiS 966 */ + { PCI_VDEVICE(SI, 0x1185), board_ahci_nopmp }, /* SiS 968 */ + { PCI_VDEVICE(SI, 0x0186), board_ahci_nopmp }, /* SiS 968 */ /* Marvell */ { PCI_VDEVICE(MARVELL, 0x6145), board_ahci_mv }, /* 6145 */ -- cgit v0.10.2 From 7ec700fcaf4f01ae72956df74a9e0d08938fd26e Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 11:27:23 +1000 Subject: drm: pcigart use proper pci map interfaces. Switch to using more correct pci dma mapping interfaces. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/ati_pcigart.c b/drivers/char/drm/ati_pcigart.c index b710426..c533d0c 100644 --- a/drivers/char/drm/ati_pcigart.c +++ b/drivers/char/drm/ati_pcigart.c @@ -76,7 +76,7 @@ int drm_ati_pcigart_cleanup(struct drm_device *dev, struct drm_ati_pcigart_info for (i = 0; i < pages; i++) { if (!entry->busaddr[i]) break; - pci_unmap_single(dev->pdev, entry->busaddr[i], + pci_unmap_page(dev->pdev, entry->busaddr[i], PAGE_SIZE, PCI_DMA_TODEVICE); } @@ -137,10 +137,8 @@ int drm_ati_pcigart_init(struct drm_device *dev, struct drm_ati_pcigart_info *ga for (i = 0; i < pages; i++) { /* we need to support large memory configurations */ - entry->busaddr[i] = pci_map_single(dev->pdev, - page_address(entry-> - pagelist[i]), - PAGE_SIZE, PCI_DMA_TODEVICE); + entry->busaddr[i] = pci_map_page(dev->pdev, entry->pagelist[i], + 0, PAGE_SIZE, PCI_DMA_TODEVICE); if (entry->busaddr[i] == 0) { DRM_ERROR("unable to map PCIGART pages!\n"); drm_ati_pcigart_cleanup(dev, gart_info); -- cgit v0.10.2 From 9f18409ea3d778a171a9505c0a849d846f352bd0 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:21:25 +1000 Subject: radeon: add production microcode from AMD This adds production microcode for r100->r500 from AMD. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index f6f6c92..d8ede40 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -34,788 +34,12 @@ #include "radeon_drv.h" #include "r300_reg.h" +#include "radeon_microcode.h" + #define RADEON_FIFO_DEBUG 0 static int radeon_do_cleanup_cp(struct drm_device * dev); -/* CP microcode (from ATI) */ -static const u32 R200_cp_microcode[][2] = { - {0x21007000, 0000000000}, - {0x20007000, 0000000000}, - {0x000000ab, 0x00000004}, - {0x000000af, 0x00000004}, - {0x66544a49, 0000000000}, - {0x49494174, 0000000000}, - {0x54517d83, 0000000000}, - {0x498d8b64, 0000000000}, - {0x49494949, 0000000000}, - {0x49da493c, 0000000000}, - {0x49989898, 0000000000}, - {0xd34949d5, 0000000000}, - {0x9dc90e11, 0000000000}, - {0xce9b9b9b, 0000000000}, - {0x000f0000, 0x00000016}, - {0x352e232c, 0000000000}, - {0x00000013, 0x00000004}, - {0x000f0000, 0x00000016}, - {0x352e272c, 0000000000}, - {0x000f0001, 0x00000016}, - {0x3239362f, 0000000000}, - {0x000077ef, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000020, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00000016, 0x00000004}, - {0x0003802a, 0x00000002}, - {0x040067e0, 0x00000002}, - {0x00000016, 0x00000004}, - {0x000077e0, 0x00000002}, - {0x00065000, 0x00000002}, - {0x000037e1, 0x00000002}, - {0x040067e1, 0x00000006}, - {0x000077e0, 0x00000002}, - {0x000077e1, 0x00000002}, - {0x000077e1, 0x00000006}, - {0xffffffff, 0000000000}, - {0x10000000, 0000000000}, - {0x0003802a, 0x00000002}, - {0x040067e0, 0x00000006}, - {0x00007675, 0x00000002}, - {0x00007676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0003802b, 0x00000002}, - {0x04002676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0000002e, 0x00000018}, - {0x0000002e, 0x00000018}, - {0000000000, 0x00000006}, - {0x0000002f, 0x00000018}, - {0x0000002f, 0x00000018}, - {0000000000, 0x00000006}, - {0x01605000, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00098000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x64c0603d, 0x00000004}, - {0x00080000, 0x00000016}, - {0000000000, 0000000000}, - {0x0400251d, 0x00000002}, - {0x00007580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x04002580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x00000046, 0x00000004}, - {0x00005000, 0000000000}, - {0x00061000, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x00019000, 0x00000002}, - {0x00011055, 0x00000014}, - {0x00000055, 0x00000012}, - {0x0400250f, 0x00000002}, - {0x0000504a, 0x00000004}, - {0x00007565, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000051, 0x00000004}, - {0x01e655b4, 0x00000002}, - {0x4401b0dc, 0x00000002}, - {0x01c110dc, 0x00000002}, - {0x2666705d, 0x00000018}, - {0x040c2565, 0x00000002}, - {0x0000005d, 0x00000018}, - {0x04002564, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000054, 0x00000004}, - {0x00401060, 0x00000008}, - {0x00101000, 0x00000002}, - {0x000d80ff, 0x00000002}, - {0x00800063, 0x00000008}, - {0x000f9000, 0x00000002}, - {0x000e00ff, 0x00000002}, - {0000000000, 0x00000006}, - {0x00000080, 0x00000018}, - {0x00000054, 0x00000004}, - {0x00007576, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00009000, 0x00000002}, - {0x00041000, 0x00000002}, - {0x0c00350e, 0x00000002}, - {0x00049000, 0x00000002}, - {0x00051000, 0x00000002}, - {0x01e785f8, 0x00000002}, - {0x00200000, 0x00000002}, - {0x00600073, 0x0000000c}, - {0x00007563, 0x00000002}, - {0x006075f0, 0x00000021}, - {0x20007068, 0x00000004}, - {0x00005068, 0x00000004}, - {0x00007576, 0x00000002}, - {0x00007577, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x0000750f, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00600076, 0x0000000c}, - {0x006075f0, 0x00000021}, - {0x000075f8, 0x00000002}, - {0x00000076, 0x00000004}, - {0x000a750e, 0x00000002}, - {0x0020750f, 0x00000002}, - {0x00600079, 0x00000004}, - {0x00007570, 0x00000002}, - {0x00007571, 0x00000002}, - {0x00007572, 0x00000006}, - {0x00005000, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00007568, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000084, 0x0000000c}, - {0x00058000, 0x00000002}, - {0x0c607562, 0x00000002}, - {0x00000086, 0x00000004}, - {0x00600085, 0x00000004}, - {0x400070dd, 0000000000}, - {0x000380dd, 0x00000002}, - {0x00000093, 0x0000001c}, - {0x00065095, 0x00000018}, - {0x040025bb, 0x00000002}, - {0x00061096, 0x00000018}, - {0x040075bc, 0000000000}, - {0x000075bb, 0x00000002}, - {0x000075bc, 0000000000}, - {0x00090000, 0x00000006}, - {0x00090000, 0x00000002}, - {0x000d8002, 0x00000006}, - {0x00005000, 0x00000002}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x01665000, 0x00000002}, - {0x000a0000, 0x00000002}, - {0x000671cc, 0x00000002}, - {0x0286f1cd, 0x00000002}, - {0x000000a3, 0x00000010}, - {0x21007000, 0000000000}, - {0x000000aa, 0x0000001c}, - {0x00065000, 0x00000002}, - {0x000a0000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x000b0000, 0x00000002}, - {0x38067000, 0x00000002}, - {0x000a00a6, 0x00000004}, - {0x20007000, 0000000000}, - {0x01200000, 0x00000002}, - {0x20077000, 0x00000002}, - {0x01200000, 0x00000002}, - {0x20007000, 0000000000}, - {0x00061000, 0x00000002}, - {0x0120751b, 0x00000002}, - {0x8040750a, 0x00000002}, - {0x8040750b, 0x00000002}, - {0x00110000, 0x00000002}, - {0x000380dd, 0x00000002}, - {0x000000bd, 0x0000001c}, - {0x00061096, 0x00000018}, - {0x844075bd, 0x00000002}, - {0x00061095, 0x00000018}, - {0x840075bb, 0x00000002}, - {0x00061096, 0x00000018}, - {0x844075bc, 0x00000002}, - {0x000000c0, 0x00000004}, - {0x804075bd, 0x00000002}, - {0x800075bb, 0x00000002}, - {0x804075bc, 0x00000002}, - {0x00108000, 0x00000002}, - {0x01400000, 0x00000002}, - {0x006000c4, 0x0000000c}, - {0x20c07000, 0x00000020}, - {0x000000c6, 0x00000012}, - {0x00800000, 0x00000006}, - {0x0080751d, 0x00000006}, - {0x000025bb, 0x00000002}, - {0x000040c0, 0x00000004}, - {0x0000775c, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460275d, 0x00000020}, - {0x00004000, 0000000000}, - {0x00007999, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460299b, 0x00000020}, - {0x00004000, 0000000000}, - {0x01e00830, 0x00000002}, - {0x21007000, 0000000000}, - {0x00005000, 0x00000002}, - {0x00038042, 0x00000002}, - {0x040025e0, 0x00000002}, - {0x000075e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000380d9, 0x00000002}, - {0x04007394, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - -static const u32 radeon_cp_microcode[][2] = { - {0x21007000, 0000000000}, - {0x20007000, 0000000000}, - {0x000000b4, 0x00000004}, - {0x000000b8, 0x00000004}, - {0x6f5b4d4c, 0000000000}, - {0x4c4c427f, 0000000000}, - {0x5b568a92, 0000000000}, - {0x4ca09c6d, 0000000000}, - {0xad4c4c4c, 0000000000}, - {0x4ce1af3d, 0000000000}, - {0xd8afafaf, 0000000000}, - {0xd64c4cdc, 0000000000}, - {0x4cd10d10, 0000000000}, - {0x000f0000, 0x00000016}, - {0x362f242d, 0000000000}, - {0x00000012, 0x00000004}, - {0x000f0000, 0x00000016}, - {0x362f282d, 0000000000}, - {0x000380e7, 0x00000002}, - {0x04002c97, 0x00000002}, - {0x000f0001, 0x00000016}, - {0x333a3730, 0000000000}, - {0x000077ef, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00061000, 0x00000002}, - {0x00000021, 0x0000001a}, - {0x00004000, 0x0000001e}, - {0x00000017, 0x00000004}, - {0x0003802b, 0x00000002}, - {0x040067e0, 0x00000002}, - {0x00000017, 0x00000004}, - {0x000077e0, 0x00000002}, - {0x00065000, 0x00000002}, - {0x000037e1, 0x00000002}, - {0x040067e1, 0x00000006}, - {0x000077e0, 0x00000002}, - {0x000077e1, 0x00000002}, - {0x000077e1, 0x00000006}, - {0xffffffff, 0000000000}, - {0x10000000, 0000000000}, - {0x0003802b, 0x00000002}, - {0x040067e0, 0x00000006}, - {0x00007675, 0x00000002}, - {0x00007676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0003802c, 0x00000002}, - {0x04002676, 0x00000002}, - {0x00007677, 0x00000002}, - {0x00007678, 0x00000006}, - {0x0000002f, 0x00000018}, - {0x0000002f, 0x00000018}, - {0000000000, 0x00000006}, - {0x00000030, 0x00000018}, - {0x00000030, 0x00000018}, - {0000000000, 0x00000006}, - {0x01605000, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00098000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x64c0603e, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00080000, 0x00000016}, - {0000000000, 0000000000}, - {0x0400251d, 0x00000002}, - {0x00007580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x04002580, 0x00000002}, - {0x00067581, 0x00000002}, - {0x00000049, 0x00000004}, - {0x00005000, 0000000000}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00061000, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x00019000, 0x00000002}, - {0x00011055, 0x00000014}, - {0x00000055, 0x00000012}, - {0x0400250f, 0x00000002}, - {0x0000504f, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007565, 0x00000002}, - {0x00007566, 0x00000002}, - {0x00000058, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x01e655b4, 0x00000002}, - {0x4401b0e4, 0x00000002}, - {0x01c110e4, 0x00000002}, - {0x26667066, 0x00000018}, - {0x040c2565, 0x00000002}, - {0x00000066, 0x00000018}, - {0x04002564, 0x00000002}, - {0x00007566, 0x00000002}, - {0x0000005d, 0x00000004}, - {0x00401069, 0x00000008}, - {0x00101000, 0x00000002}, - {0x000d80ff, 0x00000002}, - {0x0080006c, 0x00000008}, - {0x000f9000, 0x00000002}, - {0x000e00ff, 0x00000002}, - {0000000000, 0x00000006}, - {0x0000008f, 0x00000018}, - {0x0000005b, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007576, 0x00000002}, - {0x00065000, 0x00000002}, - {0x00009000, 0x00000002}, - {0x00041000, 0x00000002}, - {0x0c00350e, 0x00000002}, - {0x00049000, 0x00000002}, - {0x00051000, 0x00000002}, - {0x01e785f8, 0x00000002}, - {0x00200000, 0x00000002}, - {0x0060007e, 0x0000000c}, - {0x00007563, 0x00000002}, - {0x006075f0, 0x00000021}, - {0x20007073, 0x00000004}, - {0x00005073, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00007576, 0x00000002}, - {0x00007577, 0x00000002}, - {0x0000750e, 0x00000002}, - {0x0000750f, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00600083, 0x0000000c}, - {0x006075f0, 0x00000021}, - {0x000075f8, 0x00000002}, - {0x00000083, 0x00000004}, - {0x000a750e, 0x00000002}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x0020750f, 0x00000002}, - {0x00600086, 0x00000004}, - {0x00007570, 0x00000002}, - {0x00007571, 0x00000002}, - {0x00007572, 0x00000006}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00005000, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00007568, 0x00000002}, - {0x00061000, 0x00000002}, - {0x00000095, 0x0000000c}, - {0x00058000, 0x00000002}, - {0x0c607562, 0x00000002}, - {0x00000097, 0x00000004}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x00600096, 0x00000004}, - {0x400070e5, 0000000000}, - {0x000380e6, 0x00000002}, - {0x040025c5, 0x00000002}, - {0x000380e5, 0x00000002}, - {0x000000a8, 0x0000001c}, - {0x000650aa, 0x00000018}, - {0x040025bb, 0x00000002}, - {0x000610ab, 0x00000018}, - {0x040075bc, 0000000000}, - {0x000075bb, 0x00000002}, - {0x000075bc, 0000000000}, - {0x00090000, 0x00000006}, - {0x00090000, 0x00000002}, - {0x000d8002, 0x00000006}, - {0x00007832, 0x00000002}, - {0x00005000, 0x00000002}, - {0x000380e7, 0x00000002}, - {0x04002c97, 0x00000002}, - {0x00007820, 0x00000002}, - {0x00007821, 0x00000002}, - {0x00007800, 0000000000}, - {0x01200000, 0x00000002}, - {0x20077000, 0x00000002}, - {0x01200000, 0x00000002}, - {0x20007000, 0x00000002}, - {0x00061000, 0x00000002}, - {0x0120751b, 0x00000002}, - {0x8040750a, 0x00000002}, - {0x8040750b, 0x00000002}, - {0x00110000, 0x00000002}, - {0x000380e5, 0x00000002}, - {0x000000c6, 0x0000001c}, - {0x000610ab, 0x00000018}, - {0x844075bd, 0x00000002}, - {0x000610aa, 0x00000018}, - {0x840075bb, 0x00000002}, - {0x000610ab, 0x00000018}, - {0x844075bc, 0x00000002}, - {0x000000c9, 0x00000004}, - {0x804075bd, 0x00000002}, - {0x800075bb, 0x00000002}, - {0x804075bc, 0x00000002}, - {0x00108000, 0x00000002}, - {0x01400000, 0x00000002}, - {0x006000cd, 0x0000000c}, - {0x20c07000, 0x00000020}, - {0x000000cf, 0x00000012}, - {0x00800000, 0x00000006}, - {0x0080751d, 0x00000006}, - {0000000000, 0000000000}, - {0x0000775c, 0x00000002}, - {0x00a05000, 0x00000002}, - {0x00661000, 0x00000002}, - {0x0460275d, 0x00000020}, - {0x00004000, 0000000000}, - {0x01e00830, 0x00000002}, - {0x21007000, 0000000000}, - {0x6464614d, 0000000000}, - {0x69687420, 0000000000}, - {0x00000073, 0000000000}, - {0000000000, 0000000000}, - {0x00005000, 0x00000002}, - {0x000380d0, 0x00000002}, - {0x040025e0, 0x00000002}, - {0x000075e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000380e0, 0x00000002}, - {0x04002394, 0x00000002}, - {0x00005000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0x00000008, 0000000000}, - {0x00000004, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - -static const u32 R300_cp_microcode[][2] = { - {0x4200e000, 0000000000}, - {0x4000e000, 0000000000}, - {0x000000af, 0x00000008}, - {0x000000b3, 0x00000008}, - {0x6c5a504f, 0000000000}, - {0x4f4f497a, 0000000000}, - {0x5a578288, 0000000000}, - {0x4f91906a, 0000000000}, - {0x4f4f4f4f, 0000000000}, - {0x4fe24f44, 0000000000}, - {0x4f9c9c9c, 0000000000}, - {0xdc4f4fde, 0000000000}, - {0xa1cd4f4f, 0000000000}, - {0xd29d9d9d, 0000000000}, - {0x4f0f9fd7, 0000000000}, - {0x000ca000, 0x00000004}, - {0x000d0012, 0x00000038}, - {0x0000e8b4, 0x00000004}, - {0x000d0014, 0x00000038}, - {0x0000e8b6, 0x00000004}, - {0x000d0016, 0x00000038}, - {0x0000e854, 0x00000004}, - {0x000d0018, 0x00000038}, - {0x0000e855, 0x00000004}, - {0x000d001a, 0x00000038}, - {0x0000e856, 0x00000004}, - {0x000d001c, 0x00000038}, - {0x0000e857, 0x00000004}, - {0x000d001e, 0x00000038}, - {0x0000e824, 0x00000004}, - {0x000d0020, 0x00000038}, - {0x0000e825, 0x00000004}, - {0x000d0022, 0x00000038}, - {0x0000e830, 0x00000004}, - {0x000d0024, 0x00000038}, - {0x0000f0c0, 0x00000004}, - {0x000d0026, 0x00000038}, - {0x0000f0c1, 0x00000004}, - {0x000d0028, 0x00000038}, - {0x0000f041, 0x00000004}, - {0x000d002a, 0x00000038}, - {0x0000f184, 0x00000004}, - {0x000d002c, 0x00000038}, - {0x0000f185, 0x00000004}, - {0x000d002e, 0x00000038}, - {0x0000f186, 0x00000004}, - {0x000d0030, 0x00000038}, - {0x0000f187, 0x00000004}, - {0x000d0032, 0x00000038}, - {0x0000f180, 0x00000004}, - {0x000d0034, 0x00000038}, - {0x0000f393, 0x00000004}, - {0x000d0036, 0x00000038}, - {0x0000f38a, 0x00000004}, - {0x000d0038, 0x00000038}, - {0x0000f38e, 0x00000004}, - {0x0000e821, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00000043, 0x00000018}, - {0x00cce800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x001b0001, 0x00000004}, - {0x08004800, 0x00000004}, - {0x0000003a, 0x00000008}, - {0x0000a000, 0000000000}, - {0x02c0a000, 0x00000004}, - {0x000ca000, 0x00000004}, - {0x00130000, 0x00000004}, - {0x000c2000, 0x00000004}, - {0xc980c045, 0x00000008}, - {0x2000451d, 0x00000004}, - {0x0000e580, 0x00000004}, - {0x000ce581, 0x00000004}, - {0x08004580, 0x00000004}, - {0x000ce581, 0x00000004}, - {0x0000004c, 0x00000008}, - {0x0000a000, 0000000000}, - {0x000c2000, 0x00000004}, - {0x0000e50e, 0x00000004}, - {0x00032000, 0x00000004}, - {0x00022056, 0x00000028}, - {0x00000056, 0x00000024}, - {0x0800450f, 0x00000004}, - {0x0000a050, 0x00000008}, - {0x0000e565, 0x00000004}, - {0x0000e566, 0x00000004}, - {0x00000057, 0x00000008}, - {0x03cca5b4, 0x00000004}, - {0x05432000, 0x00000004}, - {0x00022000, 0x00000004}, - {0x4ccce063, 0x00000030}, - {0x08274565, 0x00000004}, - {0x00000063, 0x00000030}, - {0x08004564, 0x00000004}, - {0x0000e566, 0x00000004}, - {0x0000005a, 0x00000008}, - {0x00802066, 0x00000010}, - {0x00202000, 0x00000004}, - {0x001b00ff, 0x00000004}, - {0x01000069, 0x00000010}, - {0x001f2000, 0x00000004}, - {0x001c00ff, 0x00000004}, - {0000000000, 0x0000000c}, - {0x00000085, 0x00000030}, - {0x0000005a, 0x00000008}, - {0x0000e576, 0x00000004}, - {0x000ca000, 0x00000004}, - {0x00012000, 0x00000004}, - {0x00082000, 0x00000004}, - {0x1800650e, 0x00000004}, - {0x00092000, 0x00000004}, - {0x000a2000, 0x00000004}, - {0x000f0000, 0x00000004}, - {0x00400000, 0x00000004}, - {0x00000079, 0x00000018}, - {0x0000e563, 0x00000004}, - {0x00c0e5f9, 0x000000c2}, - {0x0000006e, 0x00000008}, - {0x0000a06e, 0x00000008}, - {0x0000e576, 0x00000004}, - {0x0000e577, 0x00000004}, - {0x0000e50e, 0x00000004}, - {0x0000e50f, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x0000007c, 0x00000018}, - {0x00c0e5f9, 0x000000c2}, - {0x0000007c, 0x00000008}, - {0x0014e50e, 0x00000004}, - {0x0040e50f, 0x00000004}, - {0x00c0007f, 0x00000008}, - {0x0000e570, 0x00000004}, - {0x0000e571, 0x00000004}, - {0x0000e572, 0x0000000c}, - {0x0000a000, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x0000e568, 0x00000004}, - {0x000c2000, 0x00000004}, - {0x00000089, 0x00000018}, - {0x000b0000, 0x00000004}, - {0x18c0e562, 0x00000004}, - {0x0000008b, 0x00000008}, - {0x00c0008a, 0x00000008}, - {0x000700e4, 0x00000004}, - {0x00000097, 0x00000038}, - {0x000ca099, 0x00000030}, - {0x080045bb, 0x00000004}, - {0x000c209a, 0x00000030}, - {0x0800e5bc, 0000000000}, - {0x0000e5bb, 0x00000004}, - {0x0000e5bc, 0000000000}, - {0x00120000, 0x0000000c}, - {0x00120000, 0x00000004}, - {0x001b0002, 0x0000000c}, - {0x0000a000, 0x00000004}, - {0x0000e821, 0x00000004}, - {0x0000e800, 0000000000}, - {0x0000e821, 0x00000004}, - {0x0000e82e, 0000000000}, - {0x02cca000, 0x00000004}, - {0x00140000, 0x00000004}, - {0x000ce1cc, 0x00000004}, - {0x050de1cd, 0x00000004}, - {0x000000a7, 0x00000020}, - {0x4200e000, 0000000000}, - {0x000000ae, 0x00000038}, - {0x000ca000, 0x00000004}, - {0x00140000, 0x00000004}, - {0x000c2000, 0x00000004}, - {0x00160000, 0x00000004}, - {0x700ce000, 0x00000004}, - {0x001400aa, 0x00000008}, - {0x4000e000, 0000000000}, - {0x02400000, 0x00000004}, - {0x400ee000, 0x00000004}, - {0x02400000, 0x00000004}, - {0x4000e000, 0000000000}, - {0x000c2000, 0x00000004}, - {0x0240e51b, 0x00000004}, - {0x0080e50a, 0x00000005}, - {0x0080e50b, 0x00000005}, - {0x00220000, 0x00000004}, - {0x000700e4, 0x00000004}, - {0x000000c1, 0x00000038}, - {0x000c209a, 0x00000030}, - {0x0880e5bd, 0x00000005}, - {0x000c2099, 0x00000030}, - {0x0800e5bb, 0x00000005}, - {0x000c209a, 0x00000030}, - {0x0880e5bc, 0x00000005}, - {0x000000c4, 0x00000008}, - {0x0080e5bd, 0x00000005}, - {0x0000e5bb, 0x00000005}, - {0x0080e5bc, 0x00000005}, - {0x00210000, 0x00000004}, - {0x02800000, 0x00000004}, - {0x00c000c8, 0x00000018}, - {0x4180e000, 0x00000040}, - {0x000000ca, 0x00000024}, - {0x01000000, 0x0000000c}, - {0x0100e51d, 0x0000000c}, - {0x000045bb, 0x00000004}, - {0x000080c4, 0x00000008}, - {0x0000f3ce, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c053cf, 0x00000040}, - {0x00008000, 0000000000}, - {0x0000f3d2, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c053d3, 0x00000040}, - {0x00008000, 0000000000}, - {0x0000f39d, 0x00000004}, - {0x0140a000, 0x00000004}, - {0x00cc2000, 0x00000004}, - {0x08c0539e, 0x00000040}, - {0x00008000, 0000000000}, - {0x03c00830, 0x00000004}, - {0x4200e000, 0000000000}, - {0x0000a000, 0x00000004}, - {0x200045e0, 0x00000004}, - {0x0000e5e1, 0000000000}, - {0x00000001, 0000000000}, - {0x000700e1, 0x00000004}, - {0x0800e394, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, - {0000000000, 0000000000}, -}; - static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { u32 ret; @@ -1004,8 +228,22 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) radeon_do_wait_for_idle(dev_priv); RADEON_WRITE(RADEON_CP_ME_RAM_ADDR, 0); - - if (dev_priv->microcode_version == UCODE_R200) { + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV200) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS100) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS200)) { + DRM_INFO("Loading R100 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + R100_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + R100_cp_microcode[i][0]); + } + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R200) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV250) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV280) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS300)) { DRM_INFO("Loading R200 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -1013,7 +251,11 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, R200_cp_microcode[i][0]); } - } else if (dev_priv->microcode_version == UCODE_R300) { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400)) { DRM_INFO("Loading R300 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -1021,12 +263,35 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, R300_cp_microcode[i][0]); } - } else { + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R420) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV410)) { + DRM_INFO("Loading R400 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + R420_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + R420_cp_microcode[i][0]); + } + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + DRM_INFO("Loading RS690 Microcode\n"); + for (i = 0; i < 256; i++) { + RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, + RS690_cp_microcode[i][1]); + RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, + RS690_cp_microcode[i][0]); + } + } else if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R520) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV530) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R580) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV560) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV570)) { + DRM_INFO("Loading R500 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, - radeon_cp_microcode[i][1]); + R520_cp_microcode[i][1]); RADEON_WRITE(RADEON_CP_ME_RAM_DATAL, - radeon_cp_microcode[i][0]); + R520_cp_microcode[i][0]); } } } diff --git a/drivers/char/drm/radeon_microcode.h b/drivers/char/drm/radeon_microcode.h new file mode 100644 index 0000000..a348c9e --- /dev/null +++ b/drivers/char/drm/radeon_microcode.h @@ -0,0 +1,1844 @@ +/* + * Copyright 2007 Advanced Micro Devices, Inc. + * All Rights Reserved. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice (including the next + * paragraph) shall be included in all copies or substantial portions of the + * Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE + * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION + * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION + * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef RADEON_MICROCODE_H +#define RADEON_MICROCODE_H + +/* production radeon ucode r1xx-r6xx */ +static const u32 R100_cp_microcode[][2] = { + { 0x21007000, 0000000000 }, + { 0x20007000, 0000000000 }, + { 0x000000b4, 0x00000004 }, + { 0x000000b8, 0x00000004 }, + { 0x6f5b4d4c, 0000000000 }, + { 0x4c4c427f, 0000000000 }, + { 0x5b568a92, 0000000000 }, + { 0x4ca09c6d, 0000000000 }, + { 0xad4c4c4c, 0000000000 }, + { 0x4ce1af3d, 0000000000 }, + { 0xd8afafaf, 0000000000 }, + { 0xd64c4cdc, 0000000000 }, + { 0x4cd10d10, 0000000000 }, + { 0x000f0000, 0x00000016 }, + { 0x362f242d, 0000000000 }, + { 0x00000012, 0x00000004 }, + { 0x000f0000, 0x00000016 }, + { 0x362f282d, 0000000000 }, + { 0x000380e7, 0x00000002 }, + { 0x04002c97, 0x00000002 }, + { 0x000f0001, 0x00000016 }, + { 0x333a3730, 0000000000 }, + { 0x000077ef, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000021, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00000017, 0x00000004 }, + { 0x0003802b, 0x00000002 }, + { 0x040067e0, 0x00000002 }, + { 0x00000017, 0x00000004 }, + { 0x000077e0, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x000037e1, 0x00000002 }, + { 0x040067e1, 0x00000006 }, + { 0x000077e0, 0x00000002 }, + { 0x000077e1, 0x00000002 }, + { 0x000077e1, 0x00000006 }, + { 0xffffffff, 0000000000 }, + { 0x10000000, 0000000000 }, + { 0x0003802b, 0x00000002 }, + { 0x040067e0, 0x00000006 }, + { 0x00007675, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0000002f, 0x00000018 }, + { 0x0000002f, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x00000030, 0x00000018 }, + { 0x00000030, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x01605000, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00098000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x64c0603e, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00080000, 0x00000016 }, + { 0000000000, 0000000000 }, + { 0x0400251d, 0x00000002 }, + { 0x00007580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x04002580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x00000049, 0x00000004 }, + { 0x00005000, 0000000000 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x00019000, 0x00000002 }, + { 0x00011055, 0x00000014 }, + { 0x00000055, 0x00000012 }, + { 0x0400250f, 0x00000002 }, + { 0x0000504f, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007565, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000058, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x01e655b4, 0x00000002 }, + { 0x4401b0e4, 0x00000002 }, + { 0x01c110e4, 0x00000002 }, + { 0x26667066, 0x00000018 }, + { 0x040c2565, 0x00000002 }, + { 0x00000066, 0x00000018 }, + { 0x04002564, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x0000005d, 0x00000004 }, + { 0x00401069, 0x00000008 }, + { 0x00101000, 0x00000002 }, + { 0x000d80ff, 0x00000002 }, + { 0x0080006c, 0x00000008 }, + { 0x000f9000, 0x00000002 }, + { 0x000e00ff, 0x00000002 }, + { 0000000000, 0x00000006 }, + { 0x0000008f, 0x00000018 }, + { 0x0000005b, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007576, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00009000, 0x00000002 }, + { 0x00041000, 0x00000002 }, + { 0x0c00350e, 0x00000002 }, + { 0x00049000, 0x00000002 }, + { 0x00051000, 0x00000002 }, + { 0x01e785f8, 0x00000002 }, + { 0x00200000, 0x00000002 }, + { 0x0060007e, 0x0000000c }, + { 0x00007563, 0x00000002 }, + { 0x006075f0, 0x00000021 }, + { 0x20007073, 0x00000004 }, + { 0x00005073, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00007576, 0x00000002 }, + { 0x00007577, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x0000750f, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00600083, 0x0000000c }, + { 0x006075f0, 0x00000021 }, + { 0x000075f8, 0x00000002 }, + { 0x00000083, 0x00000004 }, + { 0x000a750e, 0x00000002 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x0020750f, 0x00000002 }, + { 0x00600086, 0x00000004 }, + { 0x00007570, 0x00000002 }, + { 0x00007571, 0x00000002 }, + { 0x00007572, 0x00000006 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00005000, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00007568, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000095, 0x0000000c }, + { 0x00058000, 0x00000002 }, + { 0x0c607562, 0x00000002 }, + { 0x00000097, 0x00000004 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x00600096, 0x00000004 }, + { 0x400070e5, 0000000000 }, + { 0x000380e6, 0x00000002 }, + { 0x040025c5, 0x00000002 }, + { 0x000380e5, 0x00000002 }, + { 0x000000a8, 0x0000001c }, + { 0x000650aa, 0x00000018 }, + { 0x040025bb, 0x00000002 }, + { 0x000610ab, 0x00000018 }, + { 0x040075bc, 0000000000 }, + { 0x000075bb, 0x00000002 }, + { 0x000075bc, 0000000000 }, + { 0x00090000, 0x00000006 }, + { 0x00090000, 0x00000002 }, + { 0x000d8002, 0x00000006 }, + { 0x00007832, 0x00000002 }, + { 0x00005000, 0x00000002 }, + { 0x000380e7, 0x00000002 }, + { 0x04002c97, 0x00000002 }, + { 0x00007820, 0x00000002 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x01200000, 0x00000002 }, + { 0x20077000, 0x00000002 }, + { 0x01200000, 0x00000002 }, + { 0x20007000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x0120751b, 0x00000002 }, + { 0x8040750a, 0x00000002 }, + { 0x8040750b, 0x00000002 }, + { 0x00110000, 0x00000002 }, + { 0x000380e5, 0x00000002 }, + { 0x000000c6, 0x0000001c }, + { 0x000610ab, 0x00000018 }, + { 0x844075bd, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x840075bb, 0x00000002 }, + { 0x000610ab, 0x00000018 }, + { 0x844075bc, 0x00000002 }, + { 0x000000c9, 0x00000004 }, + { 0x804075bd, 0x00000002 }, + { 0x800075bb, 0x00000002 }, + { 0x804075bc, 0x00000002 }, + { 0x00108000, 0x00000002 }, + { 0x01400000, 0x00000002 }, + { 0x006000cd, 0x0000000c }, + { 0x20c07000, 0x00000020 }, + { 0x000000cf, 0x00000012 }, + { 0x00800000, 0x00000006 }, + { 0x0080751d, 0x00000006 }, + { 0000000000, 0000000000 }, + { 0x0000775c, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460275d, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x01e00830, 0x00000002 }, + { 0x21007000, 0000000000 }, + { 0x6464614d, 0000000000 }, + { 0x69687420, 0000000000 }, + { 0x00000073, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x00005000, 0x00000002 }, + { 0x000380d0, 0x00000002 }, + { 0x040025e0, 0x00000002 }, + { 0x000075e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000380e0, 0x00000002 }, + { 0x04002394, 0x00000002 }, + { 0x00005000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x00000008, 0000000000 }, + { 0x00000004, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R200_cp_microcode[][2] = { + { 0x21007000, 0000000000 }, + { 0x20007000, 0000000000 }, + { 0x000000bf, 0x00000004 }, + { 0x000000c3, 0x00000004 }, + { 0x7a685e5d, 0000000000 }, + { 0x5d5d5588, 0000000000 }, + { 0x68659197, 0000000000 }, + { 0x5da19f78, 0000000000 }, + { 0x5d5d5d5d, 0000000000 }, + { 0x5dee5d50, 0000000000 }, + { 0xf2acacac, 0000000000 }, + { 0xe75df9e9, 0000000000 }, + { 0xb1dd0e11, 0000000000 }, + { 0xe2afafaf, 0000000000 }, + { 0x000f0000, 0x00000016 }, + { 0x452f232d, 0000000000 }, + { 0x00000013, 0x00000004 }, + { 0x000f0000, 0x00000016 }, + { 0x452f272d, 0000000000 }, + { 0x000f0001, 0x00000016 }, + { 0x3e4d4a37, 0000000000 }, + { 0x000077ef, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00061000, 0x00000002 }, + { 0x00000020, 0x0000001a }, + { 0x00004000, 0x0000001e }, + { 0x00000016, 0x00000004 }, + { 0x0003802a, 0x00000002 }, + { 0x040067e0, 0x00000002 }, + { 0x00000016, 0x00000004 }, + { 0x000077e0, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x000037e1, 0x00000002 }, + { 0x040067e1, 0x00000006 }, + { 0x000077e0, 0x00000002 }, + { 0x000077e1, 0x00000002 }, + { 0x000077e1, 0x00000006 }, + { 0xffffffff, 0000000000 }, + { 0x10000000, 0000000000 }, + { 0x07f007f0, 0000000000 }, + { 0x0003802a, 0x00000002 }, + { 0x040067e0, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007675, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802b, 0x00000002 }, + { 0x04002676, 0x00000002 }, + { 0x00007677, 0x00000002 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0003802c, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002741, 0x00000002 }, + { 0x04002743, 0x00000002 }, + { 0x00007678, 0x00000006 }, + { 0x0000002f, 0x00000018 }, + { 0x0000002f, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x00000037, 0x00000018 }, + { 0x00000037, 0x00000018 }, + { 0000000000, 0x00000006 }, + { 0x01605000, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00098000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x64c06051, 0x00000004 }, + { 0x00080000, 0x00000016 }, + { 0000000000, 0000000000 }, + { 0x0400251d, 0x00000002 }, + { 0x00007580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x04002580, 0x00000002 }, + { 0x00067581, 0x00000002 }, + { 0x0000005a, 0x00000004 }, + { 0x00005000, 0000000000 }, + { 0x00061000, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x00019000, 0x00000002 }, + { 0x00011064, 0x00000014 }, + { 0x00000064, 0x00000012 }, + { 0x0400250f, 0x00000002 }, + { 0x0000505e, 0x00000004 }, + { 0x00007565, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000065, 0x00000004 }, + { 0x01e655b4, 0x00000002 }, + { 0x4401b0f0, 0x00000002 }, + { 0x01c110f0, 0x00000002 }, + { 0x26667071, 0x00000018 }, + { 0x040c2565, 0x00000002 }, + { 0x00000071, 0x00000018 }, + { 0x04002564, 0x00000002 }, + { 0x00007566, 0x00000002 }, + { 0x00000068, 0x00000004 }, + { 0x00401074, 0x00000008 }, + { 0x00101000, 0x00000002 }, + { 0x000d80ff, 0x00000002 }, + { 0x00800077, 0x00000008 }, + { 0x000f9000, 0x00000002 }, + { 0x000e00ff, 0x00000002 }, + { 0000000000, 0x00000006 }, + { 0x00000094, 0x00000018 }, + { 0x00000068, 0x00000004 }, + { 0x00007576, 0x00000002 }, + { 0x00065000, 0x00000002 }, + { 0x00009000, 0x00000002 }, + { 0x00041000, 0x00000002 }, + { 0x0c00350e, 0x00000002 }, + { 0x00049000, 0x00000002 }, + { 0x00051000, 0x00000002 }, + { 0x01e785f8, 0x00000002 }, + { 0x00200000, 0x00000002 }, + { 0x00600087, 0x0000000c }, + { 0x00007563, 0x00000002 }, + { 0x006075f0, 0x00000021 }, + { 0x2000707c, 0x00000004 }, + { 0x0000507c, 0x00000004 }, + { 0x00007576, 0x00000002 }, + { 0x00007577, 0x00000002 }, + { 0x0000750e, 0x00000002 }, + { 0x0000750f, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x0060008a, 0x0000000c }, + { 0x006075f0, 0x00000021 }, + { 0x000075f8, 0x00000002 }, + { 0x0000008a, 0x00000004 }, + { 0x000a750e, 0x00000002 }, + { 0x0020750f, 0x00000002 }, + { 0x0060008d, 0x00000004 }, + { 0x00007570, 0x00000002 }, + { 0x00007571, 0x00000002 }, + { 0x00007572, 0x00000006 }, + { 0x00005000, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00007568, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x00000098, 0x0000000c }, + { 0x00058000, 0x00000002 }, + { 0x0c607562, 0x00000002 }, + { 0x0000009a, 0x00000004 }, + { 0x00600099, 0x00000004 }, + { 0x400070f1, 0000000000 }, + { 0x000380f1, 0x00000002 }, + { 0x000000a7, 0x0000001c }, + { 0x000650a9, 0x00000018 }, + { 0x040025bb, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x040075bc, 0000000000 }, + { 0x000075bb, 0x00000002 }, + { 0x000075bc, 0000000000 }, + { 0x00090000, 0x00000006 }, + { 0x00090000, 0x00000002 }, + { 0x000d8002, 0x00000006 }, + { 0x00005000, 0x00000002 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x00007821, 0x00000002 }, + { 0x00007800, 0000000000 }, + { 0x01665000, 0x00000002 }, + { 0x000a0000, 0x00000002 }, + { 0x000671cc, 0x00000002 }, + { 0x0286f1cd, 0x00000002 }, + { 0x000000b7, 0x00000010 }, + { 0x21007000, 0000000000 }, + { 0x000000be, 0x0000001c }, + { 0x00065000, 0x00000002 }, + { 0x000a0000, 0x00000002 }, + { 0x00061000, 0x00000002 }, + { 0x000b0000, 0x00000002 }, + { 0x38067000, 0x00000002 }, + { 0x000a00ba, 0x00000004 }, + { 0x20007000, 0000000000 }, + { 0x01200000, 0x00000002 }, + { 0x20077000, 0x00000002 }, + { 0x01200000, 0x00000002 }, + { 0x20007000, 0000000000 }, + { 0x00061000, 0x00000002 }, + { 0x0120751b, 0x00000002 }, + { 0x8040750a, 0x00000002 }, + { 0x8040750b, 0x00000002 }, + { 0x00110000, 0x00000002 }, + { 0x000380f1, 0x00000002 }, + { 0x000000d1, 0x0000001c }, + { 0x000610aa, 0x00000018 }, + { 0x844075bd, 0x00000002 }, + { 0x000610a9, 0x00000018 }, + { 0x840075bb, 0x00000002 }, + { 0x000610aa, 0x00000018 }, + { 0x844075bc, 0x00000002 }, + { 0x000000d4, 0x00000004 }, + { 0x804075bd, 0x00000002 }, + { 0x800075bb, 0x00000002 }, + { 0x804075bc, 0x00000002 }, + { 0x00108000, 0x00000002 }, + { 0x01400000, 0x00000002 }, + { 0x006000d8, 0x0000000c }, + { 0x20c07000, 0x00000020 }, + { 0x000000da, 0x00000012 }, + { 0x00800000, 0x00000006 }, + { 0x0080751d, 0x00000006 }, + { 0x000025bb, 0x00000002 }, + { 0x000040d4, 0x00000004 }, + { 0x0000775c, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460275d, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x00007999, 0x00000002 }, + { 0x00a05000, 0x00000002 }, + { 0x00661000, 0x00000002 }, + { 0x0460299b, 0x00000020 }, + { 0x00004000, 0000000000 }, + { 0x01e00830, 0x00000002 }, + { 0x21007000, 0000000000 }, + { 0x00005000, 0x00000002 }, + { 0x00038056, 0x00000002 }, + { 0x040025e0, 0x00000002 }, + { 0x000075e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000380ed, 0x00000002 }, + { 0x04007394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000078c4, 0x00000002 }, + { 0x000078c5, 0x00000002 }, + { 0x000078c6, 0x00000002 }, + { 0x00007924, 0x00000002 }, + { 0x00007925, 0x00000002 }, + { 0x00007926, 0x00000002 }, + { 0x000000f2, 0x00000004 }, + { 0x00007924, 0x00000002 }, + { 0x00007925, 0x00000002 }, + { 0x00007926, 0x00000002 }, + { 0x000000f9, 0x00000004 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R300_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x000000ae, 0x00000008 }, + { 0x000000b2, 0x00000008 }, + { 0x67554b4a, 0000000000 }, + { 0x4a4a4475, 0000000000 }, + { 0x55527d83, 0000000000 }, + { 0x4a8c8b65, 0000000000 }, + { 0x4aef4af6, 0000000000 }, + { 0x4ae14a4a, 0000000000 }, + { 0xe4979797, 0000000000 }, + { 0xdb4aebdd, 0000000000 }, + { 0x9ccc4a4a, 0000000000 }, + { 0xd1989898, 0000000000 }, + { 0x4a0f9ad6, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000080, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x00012000, 0x00000004 }, + { 0x00082000, 0x00000004 }, + { 0x1800650e, 0x00000004 }, + { 0x00092000, 0x00000004 }, + { 0x000a2000, 0x00000004 }, + { 0x000f0000, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000074, 0x00000018 }, + { 0x0000e563, 0x00000004 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0000a069, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000077, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000077, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0007a, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000084, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000086, 0x00000008 }, + { 0x00c00085, 0x00000008 }, + { 0x000700e3, 0x00000004 }, + { 0x00000092, 0x00000038 }, + { 0x000ca094, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2095, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x000000a4, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x000000a1, 0x00000008 }, + { 0x000000a6, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x000000ad, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x001400a9, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700e3, 0x00000004 }, + { 0x000000c0, 0x00000038 }, + { 0x000c2095, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2094, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2095, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000c3, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000c7, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000c9, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080c3, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700e0, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000e4, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000eb, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000f3, 0x00000034 }, + { 0x000000f0, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R420_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x00000099, 0x00000008 }, + { 0x0000009d, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0xd9d3dff6, 0000000000 }, + { 0x4ac54a4a, 0000000000 }, + { 0xc8828282, 0000000000 }, + { 0xbf4acfc1, 0000000000 }, + { 0x87b04a4a, 0000000000 }, + { 0xb5838383, 0000000000 }, + { 0x4a0f85ba, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700c7, 0x00000004 }, + { 0x00000080, 0x00000038 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x0000008f, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x0000008c, 0x00000008 }, + { 0x00000091, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x00000098, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x00140094, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700c7, 0x00000004 }, + { 0x000000a4, 0x00000038 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000ab, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000ad, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080a7, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c4, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000c8, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cf, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000d7, 0x00000034 }, + { 0x000000d4, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x0000e1cc, 0x00000004 }, + { 0x0500e1cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000de, 0x00000034 }, + { 0x000000da, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x0019e1cc, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x0500a000, 0x00000004 }, + { 0x080041cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 RS600_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x000000a0, 0x00000008 }, + { 0x000000a4, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0x4ae74af6, 0000000000 }, + { 0x4ad34a4a, 0000000000 }, + { 0xd6898989, 0000000000 }, + { 0xcd4addcf, 0000000000 }, + { 0x8ebe4ae2, 0000000000 }, + { 0xc38a8a8a, 0000000000 }, + { 0x4a0f8cc8, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700d5, 0x00000004 }, + { 0x00000084, 0x00000038 }, + { 0x000ca086, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2087, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000096, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x00000093, 0x00000008 }, + { 0x00000098, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x0000009f, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x0014009b, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700d5, 0x00000004 }, + { 0x000000b2, 0x00000038 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2086, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000b5, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000b9, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000bb, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080b5, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700d2, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000d6, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000dd, 0x00000008 }, + { 0x00e00116, 0000000000 }, + { 0x000700e1, 0x00000004 }, + { 0x0800401c, 0x00000004 }, + { 0x200050e7, 0x00000004 }, + { 0x0000e01d, 0x00000004 }, + { 0x000000e4, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000eb, 0x00000034 }, + { 0x000000e8, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 RS690_cp_microcode[][2] = { + { 0x000000dd, 0x00000008 }, + { 0x000000df, 0x00000008 }, + { 0x000000a0, 0x00000008 }, + { 0x000000a4, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0x4ad74af6, 0000000000 }, + { 0x4ac94a4a, 0000000000 }, + { 0xcc898989, 0000000000 }, + { 0xc34ad3c5, 0000000000 }, + { 0x8e4a4a4a, 0000000000 }, + { 0x4a8a8a8a, 0000000000 }, + { 0x4a0f8c4a, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000f041, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000f184, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000f185, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000f186, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000f187, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700cb, 0x00000004 }, + { 0x00000084, 0x00000038 }, + { 0x000ca086, 0x00000030 }, + { 0x080045bb, 0x00000004 }, + { 0x000c2087, 0x00000030 }, + { 0x0800e5bc, 0000000000 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x00120000, 0x0000000c }, + { 0x00120000, 0x00000004 }, + { 0x001b0002, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x00000096, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x00000093, 0x00000008 }, + { 0x00000098, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x0000009f, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x0014009b, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x00100000, 0x0000002c }, + { 0x00004000, 0000000000 }, + { 0x080045c8, 0x00000004 }, + { 0x00240005, 0x00000004 }, + { 0x08004d0b, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700cb, 0x00000004 }, + { 0x000000b7, 0x00000038 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bd, 0x00000005 }, + { 0x000c2086, 0x00000030 }, + { 0x0800e5bb, 0x00000005 }, + { 0x000c2087, 0x00000030 }, + { 0x0880e5bc, 0x00000005 }, + { 0x000000ba, 0x00000008 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000be, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000c0, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080ba, 0x00000008 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c8, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cc, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000d3, 0x00000008 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000db, 0x00000034 }, + { 0x000000d8, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x000000e1, 0x00000030 }, + { 0x4200e000, 0000000000 }, + { 0x000000e1, 0x00000030 }, + { 0x4000e000, 0000000000 }, + { 0x0025001b, 0x00000004 }, + { 0x00230000, 0x00000004 }, + { 0x00250005, 0x00000004 }, + { 0x000000e6, 0x00000034 }, + { 0000000000, 0x0000000c }, + { 0x00244000, 0x00000004 }, + { 0x080045c8, 0x00000004 }, + { 0x00240005, 0x00000004 }, + { 0x08004d0b, 0x0000000c }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + +static const u32 R520_cp_microcode[][2] = { + { 0x4200e000, 0000000000 }, + { 0x4000e000, 0000000000 }, + { 0x00000099, 0x00000008 }, + { 0x0000009d, 0x00000008 }, + { 0x4a554b4a, 0000000000 }, + { 0x4a4a4467, 0000000000 }, + { 0x55526f75, 0000000000 }, + { 0x4a7e7d65, 0000000000 }, + { 0xe0dae6f6, 0000000000 }, + { 0x4ac54a4a, 0000000000 }, + { 0xc8828282, 0000000000 }, + { 0xbf4acfc1, 0000000000 }, + { 0x87b04ad5, 0000000000 }, + { 0xb5838383, 0000000000 }, + { 0x4a0f85ba, 0000000000 }, + { 0x000ca000, 0x00000004 }, + { 0x000d0012, 0x00000038 }, + { 0x0000e8b4, 0x00000004 }, + { 0x000d0014, 0x00000038 }, + { 0x0000e8b6, 0x00000004 }, + { 0x000d0016, 0x00000038 }, + { 0x0000e854, 0x00000004 }, + { 0x000d0018, 0x00000038 }, + { 0x0000e855, 0x00000004 }, + { 0x000d001a, 0x00000038 }, + { 0x0000e856, 0x00000004 }, + { 0x000d001c, 0x00000038 }, + { 0x0000e857, 0x00000004 }, + { 0x000d001e, 0x00000038 }, + { 0x0000e824, 0x00000004 }, + { 0x000d0020, 0x00000038 }, + { 0x0000e825, 0x00000004 }, + { 0x000d0022, 0x00000038 }, + { 0x0000e830, 0x00000004 }, + { 0x000d0024, 0x00000038 }, + { 0x0000f0c0, 0x00000004 }, + { 0x000d0026, 0x00000038 }, + { 0x0000f0c1, 0x00000004 }, + { 0x000d0028, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002a, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002c, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d002e, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d0030, 0x00000038 }, + { 0x0000e000, 0x00000004 }, + { 0x000d0032, 0x00000038 }, + { 0x0000f180, 0x00000004 }, + { 0x000d0034, 0x00000038 }, + { 0x0000f393, 0x00000004 }, + { 0x000d0036, 0x00000038 }, + { 0x0000f38a, 0x00000004 }, + { 0x000d0038, 0x00000038 }, + { 0x0000f38e, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000043, 0x00000018 }, + { 0x00cce800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x08004800, 0x00000004 }, + { 0x0000003a, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x2000451d, 0x00000004 }, + { 0x0000e580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x08004580, 0x00000004 }, + { 0x000ce581, 0x00000004 }, + { 0x00000047, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x00032000, 0x00000004 }, + { 0x00022051, 0x00000028 }, + { 0x00000051, 0x00000024 }, + { 0x0800450f, 0x00000004 }, + { 0x0000a04b, 0x00000008 }, + { 0x0000e565, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000052, 0x00000008 }, + { 0x03cca5b4, 0x00000004 }, + { 0x05432000, 0x00000004 }, + { 0x00022000, 0x00000004 }, + { 0x4ccce05e, 0x00000030 }, + { 0x08274565, 0x00000004 }, + { 0x0000005e, 0x00000030 }, + { 0x08004564, 0x00000004 }, + { 0x0000e566, 0x00000004 }, + { 0x00000055, 0x00000008 }, + { 0x00802061, 0x00000010 }, + { 0x00202000, 0x00000004 }, + { 0x001b00ff, 0x00000004 }, + { 0x01000064, 0x00000010 }, + { 0x001f2000, 0x00000004 }, + { 0x001c00ff, 0x00000004 }, + { 0000000000, 0x0000000c }, + { 0x00000072, 0x00000030 }, + { 0x00000055, 0x00000008 }, + { 0x0000e576, 0x00000004 }, + { 0x0000e577, 0x00000004 }, + { 0x0000e50e, 0x00000004 }, + { 0x0000e50f, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00000069, 0x00000018 }, + { 0x00c0e5f9, 0x000000c2 }, + { 0x00000069, 0x00000008 }, + { 0x0014e50e, 0x00000004 }, + { 0x0040e50f, 0x00000004 }, + { 0x00c0006c, 0x00000008 }, + { 0x0000e570, 0x00000004 }, + { 0x0000e571, 0x00000004 }, + { 0x0000e572, 0x0000000c }, + { 0x0000a000, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x0000e568, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00000076, 0x00000018 }, + { 0x000b0000, 0x00000004 }, + { 0x18c0e562, 0x00000004 }, + { 0x00000078, 0x00000008 }, + { 0x00c00077, 0x00000008 }, + { 0x000700c7, 0x00000004 }, + { 0x00000080, 0x00000038 }, + { 0x0000e5bb, 0x00000004 }, + { 0x0000e5bc, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e800, 0000000000 }, + { 0x0000e821, 0x00000004 }, + { 0x0000e82e, 0000000000 }, + { 0x02cca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000ce1cc, 0x00000004 }, + { 0x050de1cd, 0x00000004 }, + { 0x00400000, 0x00000004 }, + { 0x0000008f, 0x00000018 }, + { 0x00c0a000, 0x00000004 }, + { 0x0000008c, 0x00000008 }, + { 0x00000091, 0x00000020 }, + { 0x4200e000, 0000000000 }, + { 0x00000098, 0x00000038 }, + { 0x000ca000, 0x00000004 }, + { 0x00140000, 0x00000004 }, + { 0x000c2000, 0x00000004 }, + { 0x00160000, 0x00000004 }, + { 0x700ce000, 0x00000004 }, + { 0x00140094, 0x00000008 }, + { 0x4000e000, 0000000000 }, + { 0x02400000, 0x00000004 }, + { 0x400ee000, 0x00000004 }, + { 0x02400000, 0x00000004 }, + { 0x4000e000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x0240e51b, 0x00000004 }, + { 0x0080e50a, 0x00000005 }, + { 0x0080e50b, 0x00000005 }, + { 0x00220000, 0x00000004 }, + { 0x000700c7, 0x00000004 }, + { 0x000000a4, 0x00000038 }, + { 0x0080e5bd, 0x00000005 }, + { 0x0000e5bb, 0x00000005 }, + { 0x0080e5bc, 0x00000005 }, + { 0x00210000, 0x00000004 }, + { 0x02800000, 0x00000004 }, + { 0x00c000ab, 0x00000018 }, + { 0x4180e000, 0x00000040 }, + { 0x000000ad, 0x00000024 }, + { 0x01000000, 0x0000000c }, + { 0x0100e51d, 0x0000000c }, + { 0x000045bb, 0x00000004 }, + { 0x000080a7, 0x00000008 }, + { 0x0000f3ce, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053cf, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f3d2, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c053d3, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x0000f39d, 0x00000004 }, + { 0x0140a000, 0x00000004 }, + { 0x00cc2000, 0x00000004 }, + { 0x08c0539e, 0x00000040 }, + { 0x00008000, 0000000000 }, + { 0x03c00830, 0x00000004 }, + { 0x4200e000, 0000000000 }, + { 0x0000a000, 0x00000004 }, + { 0x200045e0, 0x00000004 }, + { 0x0000e5e1, 0000000000 }, + { 0x00000001, 0000000000 }, + { 0x000700c4, 0x00000004 }, + { 0x0800e394, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x0000e8c4, 0x00000004 }, + { 0x0000e8c5, 0x00000004 }, + { 0x0000e8c6, 0x00000004 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000c8, 0x00000008 }, + { 0x0000e928, 0x00000004 }, + { 0x0000e929, 0x00000004 }, + { 0x0000e92a, 0x00000004 }, + { 0x000000cf, 0x00000008 }, + { 0xdeadbeef, 0000000000 }, + { 0x00000116, 0000000000 }, + { 0x000700d3, 0x00000004 }, + { 0x080050e7, 0x00000004 }, + { 0x000700d4, 0x00000004 }, + { 0x0800401c, 0x00000004 }, + { 0x0000e01d, 0000000000 }, + { 0x02c02000, 0x00000004 }, + { 0x00060000, 0x00000004 }, + { 0x000000de, 0x00000034 }, + { 0x000000db, 0x00000008 }, + { 0x00008000, 0x00000004 }, + { 0xc000e000, 0000000000 }, + { 0x0000e1cc, 0x00000004 }, + { 0x0500e1cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000e5, 0x00000034 }, + { 0x000000e1, 0x00000008 }, + { 0x0000a000, 0000000000 }, + { 0x0019e1cc, 0x00000004 }, + { 0x001b0001, 0x00000004 }, + { 0x0500a000, 0x00000004 }, + { 0x080041cd, 0x00000004 }, + { 0x000ca000, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0x000c2000, 0x00000004 }, + { 0x001d0018, 0x00000004 }, + { 0x001a0001, 0x00000004 }, + { 0x000000fb, 0x00000034 }, + { 0x0000004a, 0x00000008 }, + { 0x0500a04a, 0x00000008 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, + { 0000000000, 0000000000 }, +}; + + +#endif -- cgit v0.10.2 From fa0d71b967506031f7cb08ced6095d1c4f988594 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 11:27:01 +1000 Subject: drm/rs690: set all of gart base address. Docs state bits 4-11 maps to bits 32-39 of the 40-bit range Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index d8ede40..1e434ba 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -659,8 +659,9 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID); RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800); - RS690_WRITE_MCIND(RS690_MC_GART_BASE, - dev_priv->gart_info.bus_addr); + temp = dev_priv->gart_info.bus_addr & 0xfffff000; + temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; + RS690_WRITE_MCIND(RS690_MC_GART_BASE, temp); temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL); RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000); -- cgit v0.10.2 From 3722bfc607d46275369865c02fe8694486d640b5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 11:28:27 +1000 Subject: drm/rs690: set base 2 to 0. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 1e434ba..6e13f4b 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -669,6 +669,8 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) RS690_WRITE_MCIND(RS690_MC_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); + RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16)); diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 173ae62..b22816b 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -497,6 +497,7 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 #define RS690_MC_AGP_BASE 0x102 +#define RS690_MC_AGP_BASE_2 0x103 #define R520_MC_IND_INDEX 0x70 #define R520_MC_IND_WR_EN (1<<24) -- cgit v0.10.2 From 2735977b12cb0f113aae24afff04747b6d0f5bf1 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 12:54:16 +1000 Subject: drm/radeon: IGP clean up register and magic numbers. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 6e13f4b..38eda33 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -109,9 +109,9 @@ static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr) { u32 ret; - RADEON_WRITE(RADEON_IGPGART_INDEX, addr & 0x7f); - ret = RADEON_READ(RADEON_IGPGART_DATA); - RADEON_WRITE(RADEON_IGPGART_INDEX, 0x7f); + RADEON_WRITE(RS400_NB_MC_INDEX, addr & 0x7f); + ret = RADEON_READ(RS400_NB_MC_DATA); + RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); return ret; } @@ -613,14 +613,18 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_18, 0x1000); - RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, 0x1); - RADEON_WRITE_IGPGART(RADEON_IGPGART_CTRL, 0x42040800); - RADEON_WRITE_IGPGART(RADEON_IGPGART_BASE_ADDR, + RADEON_WRITE_IGPGART(RS400_MC_MISC_CNTL, RS400_GART_INDEX_REG_EN); + RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); + RADEON_WRITE_IGPGART(RS400_GART_FEATURE_ID, (RS400_HANG_EN | + RS400_TLB_ENABLE | + RS400_GTW_LAC_EN | + RS400_1LEVEL_GART)); + RADEON_WRITE_IGPGART(RS400_GART_BASE, dev_priv->gart_info.bus_addr); - temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_UNK_39); - RADEON_WRITE_IGPGART(RADEON_IGPGART_UNK_39, temp); + temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_MODE_CNTL); + RADEON_WRITE_IGPGART(RS400_AGP_MODE_CNTL, temp); RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); dev_priv->gart_size = 32*1024*1024; @@ -629,13 +633,13 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16))); - temp = RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_ENABLE); - RADEON_WRITE_IGPGART(RADEON_IGPGART_ENABLE, temp); + temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); + RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, temp); - RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); - RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x1); - RADEON_READ_IGPGART(dev_priv, RADEON_IGPGART_FLUSH); - RADEON_WRITE_IGPGART(RADEON_IGPGART_FLUSH, 0x0); + RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); + RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, RS400_GART_CACHE_INVALIDATE); + RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); + RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, 0); } } @@ -650,21 +654,26 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_MISC_CNTL); - RS690_WRITE_MCIND(RS690_MC_MISC_CNTL, 0x5000); + temp = RS690_READ_MCIND(dev_priv, RS400_MC_MISC_CNTL); + RS690_WRITE_MCIND(RS400_MC_MISC_CNTL, (RS400_GART_INDEX_REG_EN | + RS690_BLOCK_GFX_D3_EN)); - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, - RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_FEATURE_ID); - RS690_WRITE_MCIND(RS690_MC_GART_FEATURE_ID, 0x42040800); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_FEATURE_ID); + RS690_WRITE_MCIND(RS400_GART_FEATURE_ID, (RS400_HANG_EN | + RS400_TLB_ENABLE | + RS400_GTW_LAC_EN | + RS400_1LEVEL_GART)); temp = dev_priv->gart_info.bus_addr & 0xfffff000; temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; - RS690_WRITE_MCIND(RS690_MC_GART_BASE, temp); + RS690_WRITE_MCIND(RS400_GART_BASE, temp); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_MODE_CONTROL); - RS690_WRITE_MCIND(RS690_MC_AGP_MODE_CONTROL, 0x01400000); + temp = RS690_READ_MCIND(dev_priv, RS400_AGP_MODE_CNTL); + RS690_WRITE_MCIND(RS400_AGP_MODE_CNTL, ((1 << RS400_REQ_TYPE_SNOOP_SHIFT) | + RS400_REQ_TYPE_SNOOP_DIS)); RS690_WRITE_MCIND(RS690_MC_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); @@ -677,32 +686,32 @@ static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp); - temp = RS690_READ_MCIND(dev_priv, RS690_MC_AGP_SIZE); - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, - RS690_MC_GART_EN | RS690_MC_AGP_SIZE_32MB); + temp = RS690_READ_MCIND(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | + RS400_VA_SIZE_32MB)); do { - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); if ((temp & RS690_MC_GART_CLEAR_STATUS) == RS690_MC_GART_CLEAR_DONE) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL, - RS690_MC_GART_CC_CLEAR); + RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, + RS400_GART_CACHE_INVALIDATE); + do { - temp = RS690_READ_MCIND(dev_priv, RS690_MC_GART_CACHE_CNTL); + temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + RS690_MC_GART_CLEAR_DONE) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS690_MC_GART_CACHE_CNTL, - RS690_MC_GART_CC_NO_CHANGE); + RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, 0); } else { - RS690_WRITE_MCIND(RS690_MC_AGP_SIZE, RS690_MC_GART_DIS); + RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, 0); } } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index b22816b..f25933e 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -444,13 +444,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_DATA 0x0034 #define RADEON_PCIE_TX_GART_CNTL 0x10 # define RADEON_PCIE_TX_GART_EN (1 << 0) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0<<1) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1<<1) -# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3<<1) -# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0<<3) -# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1<<3) -# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1<<5) -# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1<<8) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_PASS_THRU (0 << 1) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_CLAMP_LO (1 << 1) +# define RADEON_PCIE_TX_GART_UNMAPPED_ACCESS_DISCARD (3 << 1) +# define RADEON_PCIE_TX_GART_MODE_32_128_CACHE (0 << 3) +# define RADEON_PCIE_TX_GART_MODE_8_4_128_CACHE (1 << 3) +# define RADEON_PCIE_TX_GART_CHK_RW_VALID_EN (1 << 5) +# define RADEON_PCIE_TX_GART_INVALIDATE_TLB (1 << 8) #define RADEON_PCIE_TX_DISCARD_RD_ADDR_LO 0x11 #define RADEON_PCIE_TX_DISCARD_RD_ADDR_HI 0x12 #define RADEON_PCIE_TX_GART_BASE 0x13 @@ -459,14 +459,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_TX_GART_END_LO 0x16 #define RADEON_PCIE_TX_GART_END_HI 0x17 -#define RADEON_IGPGART_INDEX 0x168 -#define RADEON_IGPGART_DATA 0x16c -#define RADEON_IGPGART_UNK_18 0x18 -#define RADEON_IGPGART_CTRL 0x2b -#define RADEON_IGPGART_BASE_ADDR 0x2c -#define RADEON_IGPGART_FLUSH 0x2e -#define RADEON_IGPGART_ENABLE 0x38 -#define RADEON_IGPGART_UNK_39 0x39 +#define RS400_NB_MC_INDEX 0x168 +# define RS400_NB_MC_IND_WR_EN (1 << 8) +#define RS400_NB_MC_DATA 0x16c #define RS690_MC_INDEX 0x78 # define RS690_MC_INDEX_MASK 0x1ff @@ -474,33 +469,55 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RS690_MC_INDEX_WR_ACK 0x7f #define RS690_MC_DATA 0x7c -#define RS690_MC_MISC_CNTL 0x18 -#define RS690_MC_GART_FEATURE_ID 0x2b -#define RS690_MC_GART_BASE 0x2c -#define RS690_MC_GART_CACHE_CNTL 0x2e -# define RS690_MC_GART_CC_NO_CHANGE 0x0 -# define RS690_MC_GART_CC_CLEAR 0x1 -# define RS690_MC_GART_CLEAR_STATUS (1 << 1) +/* MC indirect registers */ +#define RS400_MC_MISC_CNTL 0x18 +# define RS400_DISABLE_GTW (1 << 1) +/* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */ +# define RS400_GART_INDEX_REG_EN (1 << 12) +# define RS690_BLOCK_GFX_D3_EN (1 << 14) +#define RS400_K8_FB_LOCATION 0x1e +#define RS400_GART_FEATURE_ID 0x2b +# define RS400_HANG_EN (1 << 11) +# define RS400_TLB_ENABLE (1 << 18) +# define RS400_P2P_ENABLE (1 << 19) +# define RS400_GTW_LAC_EN (1 << 25) +# define RS400_2LEVEL_GART (0 << 30) +# define RS400_1LEVEL_GART (1 << 30) +# define RS400_PDC_EN (1 << 31) +#define RS400_GART_BASE 0x2c +#define RS400_GART_CACHE_CNTRL 0x2e +# define RS400_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ +/* ??? */ +# define RS690_MC_GART_CLEAR_STATUS (1 << 1) # define RS690_MC_GART_CLEAR_DONE (0 << 1) # define RS690_MC_GART_CLEAR_PENDING (1 << 1) -#define RS690_MC_AGP_SIZE 0x38 -# define RS690_MC_GART_DIS 0x0 -# define RS690_MC_GART_EN 0x1 -# define RS690_MC_AGP_SIZE_32MB (0 << 1) -# define RS690_MC_AGP_SIZE_64MB (1 << 1) -# define RS690_MC_AGP_SIZE_128MB (2 << 1) -# define RS690_MC_AGP_SIZE_256MB (3 << 1) -# define RS690_MC_AGP_SIZE_512MB (4 << 1) -# define RS690_MC_AGP_SIZE_1GB (5 << 1) -# define RS690_MC_AGP_SIZE_2GB (6 << 1) -#define RS690_MC_AGP_MODE_CONTROL 0x39 +#define RS400_AGP_ADDRESS_SPACE_SIZE 0x38 +# define RS400_GART_EN (1 << 0) +# define RS400_VA_SIZE_32MB (0 << 1) +# define RS400_VA_SIZE_64MB (1 << 1) +# define RS400_VA_SIZE_128MB (2 << 1) +# define RS400_VA_SIZE_256MB (3 << 1) +# define RS400_VA_SIZE_512MB (4 << 1) +# define RS400_VA_SIZE_1GB (5 << 1) +# define RS400_VA_SIZE_2GB (6 << 1) +#define RS400_AGP_MODE_CNTL 0x39 +# define RS400_POST_GART_Q_SIZE (1 << 18) +# define RS400_NONGART_SNOOP (1 << 19) +# define RS400_AGP_RD_BUF_SIZE (1 << 20) +# define RS400_REQ_TYPE_SNOOP_SHIFT 22 +# define RS400_REQ_TYPE_SNOOP_MASK 0x3 +# define RS400_REQ_TYPE_SNOOP_DIS (1 << 24) +#define RS400_MC_MISC_UMA_CNTL 0x5f +#define RS400_MC_MCLK_CNTL 0x7a +#define RS400_MC_UMA_DUALCH_CNTL 0x86 + #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 #define RS690_MC_AGP_BASE 0x102 #define RS690_MC_AGP_BASE_2 0x103 #define R520_MC_IND_INDEX 0x70 -#define R520_MC_IND_WR_EN (1<<24) +#define R520_MC_IND_WR_EN (1 << 24) #define R520_MC_IND_DATA 0x74 #define RV515_MC_FB_LOCATION 0x01 @@ -512,6 +529,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 +#define RADEON_AGP_BASE_2 0x015c +#define RS400_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 #define RADEON_RB3D_COLOROFFSET 0x1c40 @@ -1079,36 +1098,36 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_READ8(reg) DRM_READ8( dev_priv->mmio, (reg) ) #define RADEON_WRITE8(reg,val) DRM_WRITE8( dev_priv->mmio, (reg), (val) ) -#define RADEON_WRITE_PLL( addr, val ) \ +#define RADEON_WRITE_PLL(addr, val) \ do { \ - RADEON_WRITE8( RADEON_CLOCK_CNTL_INDEX, \ + RADEON_WRITE8(RADEON_CLOCK_CNTL_INDEX, \ ((addr) & 0x1f) | RADEON_PLL_WR_EN ); \ - RADEON_WRITE( RADEON_CLOCK_CNTL_DATA, (val) ); \ + RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \ } while (0) -#define RADEON_WRITE_IGPGART( addr, val ) \ +#define RADEON_WRITE_IGPGART(addr, val) \ do { \ - RADEON_WRITE( RADEON_IGPGART_INDEX, \ - ((addr) & 0x7f) | (1 << 8)); \ - RADEON_WRITE( RADEON_IGPGART_DATA, (val) ); \ - RADEON_WRITE( RADEON_IGPGART_INDEX, 0x7f ); \ + RADEON_WRITE(RS400_NB_MC_INDEX, \ + ((addr) & 0x7f) | RS400_NB_MC_IND_WR_EN); \ + RADEON_WRITE(RS400_NB_MC_DATA, (val)); \ + RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); \ } while (0) -#define RADEON_WRITE_PCIE( addr, val ) \ +#define RADEON_WRITE_PCIE(addr, val) \ do { \ - RADEON_WRITE8( RADEON_PCIE_INDEX, \ + RADEON_WRITE8(RADEON_PCIE_INDEX, \ ((addr) & 0xff)); \ - RADEON_WRITE( RADEON_PCIE_DATA, (val) ); \ + RADEON_WRITE(RADEON_PCIE_DATA, (val)); \ } while (0) -#define RADEON_WRITE_MCIND( addr, val ) \ +#define RADEON_WRITE_MCIND(addr, val) \ do { \ RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ RADEON_WRITE(R520_MC_IND_DATA, (val)); \ RADEON_WRITE(R520_MC_IND_INDEX, 0); \ } while (0) -#define RS690_WRITE_MCIND( addr, val ) \ +#define RS690_WRITE_MCIND(addr, val) \ do { \ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_EN | ((addr) & RS690_MC_INDEX_MASK)); \ RADEON_WRITE(RS690_MC_DATA, val); \ -- cgit v0.10.2 From 45e519052e8f583a709edd442a23f59581d3fe42 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 13:28:59 +1000 Subject: drm/radeon: merge IGP chip setup and fixup RS400 vs RS480 support We only support RS480 (AMD based IGP) at the moment not RS400 (Intel based IGP) ones. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index a6a499f..bad096f 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -103,20 +103,18 @@ {0x1002, 0x5653, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV410|RADEON_IS_MOBILITY|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5834, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP}, \ {0x1002, 0x5835, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS300|RADEON_IS_IGP|RADEON_IS_MOBILITY}, \ - {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5954, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5955, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5974, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5975, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5960, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5961, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5962, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5964, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5965, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280}, \ {0x1002, 0x5969, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV100}, \ - {0x1002, 0x5a41, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ - {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS400|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a61, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ + {0x1002, 0x5a62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RS480|RADEON_IS_IGP|RADEON_IS_MOBILITY|RADEON_IS_IGPGART}, \ {0x1002, 0x5b60, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b62, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ {0x1002, 0x5b63, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV380|RADEON_NEW_MEMMAP}, \ diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 38eda33..3a42498 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -2,6 +2,7 @@ /* * Copyright 2000 Precision Insight, Inc., Cedar Park, Texas. * Copyright 2000 VA Linux Systems, Inc., Fremont, California. + * Copyright 2007 Advanced Micro Devices, Inc. * All Rights Reserved. * * Permission is hereby granted, free of charge, to any person obtaining a @@ -40,7 +41,7 @@ static int radeon_do_cleanup_cp(struct drm_device * dev); -static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +static u32 R500_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { u32 ret; RADEON_WRITE(R520_MC_IND_INDEX, 0x7f0000 | (addr & 0xff)); @@ -49,21 +50,41 @@ static u32 RADEON_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) return ret; } +static u32 RS480_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +{ + u32 ret; + RADEON_WRITE(RS480_NB_MC_INDEX, addr & 0xff); + ret = RADEON_READ(RS480_NB_MC_DATA); + RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); + return ret; +} + static u32 RS690_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) { + u32 ret; RADEON_WRITE(RS690_MC_INDEX, (addr & RS690_MC_INDEX_MASK)); - return RADEON_READ(RS690_MC_DATA); + ret = RADEON_READ(RS690_MC_DATA); + RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_MASK); + return ret; +} + +static u32 IGP_READ_MCIND(drm_radeon_private_t *dev_priv, int addr) +{ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + return RS690_READ_MCIND(dev_priv, addr); + else + return RS480_READ_MCIND(dev_priv, addr); } u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - return RADEON_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); + return R500_READ_MCIND(dev_priv, RV515_MC_FB_LOCATION); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) return RS690_READ_MCIND(dev_priv, RS690_MC_FB_LOCATION); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - return RADEON_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); + return R500_READ_MCIND(dev_priv, R520_MC_FB_LOCATION); else return RADEON_READ(RADEON_MC_FB_LOCATION); } @@ -71,11 +92,11 @@ u32 radeon_read_fb_location(drm_radeon_private_t *dev_priv) static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - RADEON_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); + R500_WRITE_MCIND(RV515_MC_FB_LOCATION, fb_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) RS690_WRITE_MCIND(RS690_MC_FB_LOCATION, fb_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - RADEON_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); + R500_WRITE_MCIND(R520_MC_FB_LOCATION, fb_loc); else RADEON_WRITE(RADEON_MC_FB_LOCATION, fb_loc); } @@ -83,11 +104,11 @@ static void radeon_write_fb_location(drm_radeon_private_t *dev_priv, u32 fb_loc) static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_loc) { if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) - RADEON_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); + R500_WRITE_MCIND(RV515_MC_AGP_LOCATION, agp_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, agp_loc); else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) - RADEON_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); + R500_WRITE_MCIND(R520_MC_AGP_LOCATION, agp_loc); else RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc); } @@ -106,15 +127,6 @@ static u32 RADEON_READ_PCIE(drm_radeon_private_t *dev_priv, int addr) return RADEON_READ(RADEON_PCIE_DATA); } -static u32 RADEON_READ_IGPGART(drm_radeon_private_t *dev_priv, int addr) -{ - u32 ret; - RADEON_WRITE(RS400_NB_MC_INDEX, addr & 0x7f); - ret = RADEON_READ(RS400_NB_MC_DATA); - RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); - return ret; -} - #if RADEON_FIFO_DEBUG static void radeon_status(drm_radeon_private_t * dev_priv) { @@ -255,7 +267,7 @@ static void radeon_cp_load_microcode(drm_radeon_private_t * dev_priv) ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV350) || ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV380) || - ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS400)) { + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480)) { DRM_INFO("Loading R300 Microcode\n"); for (i = 0; i < 256; i++) { RADEON_WRITE(RADEON_CP_ME_RAM_DATAH, @@ -604,114 +616,77 @@ static void radeon_test_writeback(drm_radeon_private_t * dev_priv) /* Enable or disable IGP GART on the chip */ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) { - u32 temp, tmp; - - tmp = RADEON_READ(RADEON_AIC_CNTL); - if (on) { - DRM_DEBUG("programming igpgart %08X %08lX %08X\n", - dev_priv->gart_vm_start, - (long)dev_priv->gart_info.bus_addr, - dev_priv->gart_size); - - RADEON_WRITE_IGPGART(RS400_MC_MISC_CNTL, RS400_GART_INDEX_REG_EN); - RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); - RADEON_WRITE_IGPGART(RS400_GART_FEATURE_ID, (RS400_HANG_EN | - RS400_TLB_ENABLE | - RS400_GTW_LAC_EN | - RS400_1LEVEL_GART)); - RADEON_WRITE_IGPGART(RS400_GART_BASE, - dev_priv->gart_info.bus_addr); - - temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_MODE_CNTL); - RADEON_WRITE_IGPGART(RS400_AGP_MODE_CNTL, temp); - - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); - dev_priv->gart_size = 32*1024*1024; - radeon_write_agp_location(dev_priv, - (((dev_priv->gart_vm_start - 1 + - dev_priv->gart_size) & 0xffff0000) | - (dev_priv->gart_vm_start >> 16))); - - temp = RADEON_READ_IGPGART(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); - RADEON_WRITE_IGPGART(RS400_AGP_ADDRESS_SPACE_SIZE, temp); - - RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); - RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, RS400_GART_CACHE_INVALIDATE); - RADEON_READ_IGPGART(dev_priv, RS400_GART_CACHE_CNTRL); - RADEON_WRITE_IGPGART(RS400_GART_CACHE_CNTRL, 0); - } -} - -/* Enable or disable RS690 GART on the chip */ -static void radeon_set_rs690gart(drm_radeon_private_t *dev_priv, int on) -{ u32 temp; if (on) { - DRM_DEBUG("programming rs690 gart %08X %08lX %08X\n", + DRM_DEBUG("programming igp gart %08X %08lX %08X\n", dev_priv->gart_vm_start, (long)dev_priv->gart_info.bus_addr, dev_priv->gart_size); - temp = RS690_READ_MCIND(dev_priv, RS400_MC_MISC_CNTL); - RS690_WRITE_MCIND(RS400_MC_MISC_CNTL, (RS400_GART_INDEX_REG_EN | - RS690_BLOCK_GFX_D3_EN)); + temp = IGP_READ_MCIND(dev_priv, RS480_MC_MISC_CNTL); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) + IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, (RS480_GART_INDEX_REG_EN | + RS690_BLOCK_GFX_D3_EN)); + else + IGP_WRITE_MCIND(RS480_MC_MISC_CNTL, RS480_GART_INDEX_REG_EN); - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | + RS480_VA_SIZE_32MB)); - temp = RS690_READ_MCIND(dev_priv, RS400_GART_FEATURE_ID); - RS690_WRITE_MCIND(RS400_GART_FEATURE_ID, (RS400_HANG_EN | - RS400_TLB_ENABLE | - RS400_GTW_LAC_EN | - RS400_1LEVEL_GART)); + temp = IGP_READ_MCIND(dev_priv, RS480_GART_FEATURE_ID); + IGP_WRITE_MCIND(RS480_GART_FEATURE_ID, (RS480_HANG_EN | + RS480_TLB_ENABLE | + RS480_GTW_LAC_EN | + RS480_1LEVEL_GART)); temp = dev_priv->gart_info.bus_addr & 0xfffff000; temp |= (upper_32_bits(dev_priv->gart_info.bus_addr) & 0xff) << 4; - RS690_WRITE_MCIND(RS400_GART_BASE, temp); + IGP_WRITE_MCIND(RS480_GART_BASE, temp); - temp = RS690_READ_MCIND(dev_priv, RS400_AGP_MODE_CNTL); - RS690_WRITE_MCIND(RS400_AGP_MODE_CNTL, ((1 << RS400_REQ_TYPE_SNOOP_SHIFT) | - RS400_REQ_TYPE_SNOOP_DIS)); + temp = IGP_READ_MCIND(dev_priv, RS480_AGP_MODE_CNTL); + IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) | + RS480_REQ_TYPE_SNOOP_DIS)); - RS690_WRITE_MCIND(RS690_MC_AGP_BASE, - (unsigned int)dev_priv->gart_vm_start); - - RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + IGP_WRITE_MCIND(RS690_MC_AGP_BASE, + (unsigned int)dev_priv->gart_vm_start); + IGP_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); + } else { + RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); + RADEON_WRITE(RS480_AGP_BASE_2, 0); + } dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | (dev_priv->gart_vm_start >> 16)); - RS690_WRITE_MCIND(RS690_MC_AGP_LOCATION, temp); + radeon_write_agp_location(dev_priv, temp); - temp = RS690_READ_MCIND(dev_priv, RS400_AGP_ADDRESS_SPACE_SIZE); - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, (RS400_GART_EN | - RS400_VA_SIZE_32MB)); + temp = IGP_READ_MCIND(dev_priv, RS480_AGP_ADDRESS_SPACE_SIZE); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, (RS480_GART_EN | + RS480_VA_SIZE_32MB)); do { - temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); - if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL); + if ((temp & RS480_GART_CACHE_INVALIDATE) == 0) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, - RS400_GART_CACHE_INVALIDATE); + IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, + RS480_GART_CACHE_INVALIDATE); do { - temp = RS690_READ_MCIND(dev_priv, RS400_GART_CACHE_CNTRL); - if ((temp & RS690_MC_GART_CLEAR_STATUS) == - RS690_MC_GART_CLEAR_DONE) + temp = IGP_READ_MCIND(dev_priv, RS480_GART_CACHE_CNTRL); + if ((temp & RS480_GART_CACHE_INVALIDATE) == 0) break; DRM_UDELAY(1); } while (1); - RS690_WRITE_MCIND(RS400_GART_CACHE_CNTRL, 0); + IGP_WRITE_MCIND(RS480_GART_CACHE_CNTRL, 0); } else { - RS690_WRITE_MCIND(RS400_AGP_ADDRESS_SPACE_SIZE, 0); + IGP_WRITE_MCIND(RS480_AGP_ADDRESS_SPACE_SIZE, 0); } } @@ -749,12 +724,8 @@ static void radeon_set_pcigart(drm_radeon_private_t * dev_priv, int on) { u32 tmp; - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { - radeon_set_rs690gart(dev_priv, on); - return; - } - - if (dev_priv->flags & RADEON_IS_IGPGART) { + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) || + (dev_priv->flags & RADEON_IS_IGPGART)) { radeon_set_igpgart(dev_priv, on); return; } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index f25933e..3063b0f 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -122,7 +122,7 @@ enum radeon_family { CHIP_RV380, CHIP_R420, CHIP_RV410, - CHIP_RS400, + CHIP_RS480, CHIP_RS690, CHIP_RV515, CHIP_R520, @@ -459,9 +459,9 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PCIE_TX_GART_END_LO 0x16 #define RADEON_PCIE_TX_GART_END_HI 0x17 -#define RS400_NB_MC_INDEX 0x168 -# define RS400_NB_MC_IND_WR_EN (1 << 8) -#define RS400_NB_MC_DATA 0x16c +#define RS480_NB_MC_INDEX 0x168 +# define RS480_NB_MC_IND_WR_EN (1 << 8) +#define RS480_NB_MC_DATA 0x16c #define RS690_MC_INDEX 0x78 # define RS690_MC_INDEX_MASK 0x1ff @@ -470,46 +470,42 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS690_MC_DATA 0x7c /* MC indirect registers */ -#define RS400_MC_MISC_CNTL 0x18 -# define RS400_DISABLE_GTW (1 << 1) +#define RS480_MC_MISC_CNTL 0x18 +# define RS480_DISABLE_GTW (1 << 1) /* switch between MCIND GART and MM GART registers. 0 = mmgart, 1 = mcind gart */ -# define RS400_GART_INDEX_REG_EN (1 << 12) +# define RS480_GART_INDEX_REG_EN (1 << 12) # define RS690_BLOCK_GFX_D3_EN (1 << 14) -#define RS400_K8_FB_LOCATION 0x1e -#define RS400_GART_FEATURE_ID 0x2b -# define RS400_HANG_EN (1 << 11) -# define RS400_TLB_ENABLE (1 << 18) -# define RS400_P2P_ENABLE (1 << 19) -# define RS400_GTW_LAC_EN (1 << 25) -# define RS400_2LEVEL_GART (0 << 30) -# define RS400_1LEVEL_GART (1 << 30) -# define RS400_PDC_EN (1 << 31) -#define RS400_GART_BASE 0x2c -#define RS400_GART_CACHE_CNTRL 0x2e -# define RS400_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ -/* ??? */ -# define RS690_MC_GART_CLEAR_STATUS (1 << 1) -# define RS690_MC_GART_CLEAR_DONE (0 << 1) -# define RS690_MC_GART_CLEAR_PENDING (1 << 1) -#define RS400_AGP_ADDRESS_SPACE_SIZE 0x38 -# define RS400_GART_EN (1 << 0) -# define RS400_VA_SIZE_32MB (0 << 1) -# define RS400_VA_SIZE_64MB (1 << 1) -# define RS400_VA_SIZE_128MB (2 << 1) -# define RS400_VA_SIZE_256MB (3 << 1) -# define RS400_VA_SIZE_512MB (4 << 1) -# define RS400_VA_SIZE_1GB (5 << 1) -# define RS400_VA_SIZE_2GB (6 << 1) -#define RS400_AGP_MODE_CNTL 0x39 -# define RS400_POST_GART_Q_SIZE (1 << 18) -# define RS400_NONGART_SNOOP (1 << 19) -# define RS400_AGP_RD_BUF_SIZE (1 << 20) -# define RS400_REQ_TYPE_SNOOP_SHIFT 22 -# define RS400_REQ_TYPE_SNOOP_MASK 0x3 -# define RS400_REQ_TYPE_SNOOP_DIS (1 << 24) -#define RS400_MC_MISC_UMA_CNTL 0x5f -#define RS400_MC_MCLK_CNTL 0x7a -#define RS400_MC_UMA_DUALCH_CNTL 0x86 +#define RS480_K8_FB_LOCATION 0x1e +#define RS480_GART_FEATURE_ID 0x2b +# define RS480_HANG_EN (1 << 11) +# define RS480_TLB_ENABLE (1 << 18) +# define RS480_P2P_ENABLE (1 << 19) +# define RS480_GTW_LAC_EN (1 << 25) +# define RS480_2LEVEL_GART (0 << 30) +# define RS480_1LEVEL_GART (1 << 30) +# define RS480_PDC_EN (1 << 31) +#define RS480_GART_BASE 0x2c +#define RS480_GART_CACHE_CNTRL 0x2e +# define RS480_GART_CACHE_INVALIDATE (1 << 0) /* wait for it to clear */ +#define RS480_AGP_ADDRESS_SPACE_SIZE 0x38 +# define RS480_GART_EN (1 << 0) +# define RS480_VA_SIZE_32MB (0 << 1) +# define RS480_VA_SIZE_64MB (1 << 1) +# define RS480_VA_SIZE_128MB (2 << 1) +# define RS480_VA_SIZE_256MB (3 << 1) +# define RS480_VA_SIZE_512MB (4 << 1) +# define RS480_VA_SIZE_1GB (5 << 1) +# define RS480_VA_SIZE_2GB (6 << 1) +#define RS480_AGP_MODE_CNTL 0x39 +# define RS480_POST_GART_Q_SIZE (1 << 18) +# define RS480_NONGART_SNOOP (1 << 19) +# define RS480_AGP_RD_BUF_SIZE (1 << 20) +# define RS480_REQ_TYPE_SNOOP_SHIFT 22 +# define RS480_REQ_TYPE_SNOOP_MASK 0x3 +# define RS480_REQ_TYPE_SNOOP_DIS (1 << 24) +#define RS480_MC_MISC_UMA_CNTL 0x5f +#define RS480_MC_MCLK_CNTL 0x7a +#define RS480_MC_UMA_DUALCH_CNTL 0x86 #define RS690_MC_FB_LOCATION 0x100 #define RS690_MC_AGP_LOCATION 0x101 @@ -529,8 +525,8 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 #define RADEON_MEM_SDRAM_MODE_REG 0x0158 -#define RADEON_AGP_BASE_2 0x015c -#define RS400_AGP_BASE_2 0x0164 +#define RADEON_AGP_BASE_2 0x015c /* r200+ only */ +#define RS480_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 #define RADEON_RB3D_COLOROFFSET 0x1c40 @@ -1105,14 +1101,6 @@ do { \ RADEON_WRITE(RADEON_CLOCK_CNTL_DATA, (val)); \ } while (0) -#define RADEON_WRITE_IGPGART(addr, val) \ -do { \ - RADEON_WRITE(RS400_NB_MC_INDEX, \ - ((addr) & 0x7f) | RS400_NB_MC_IND_WR_EN); \ - RADEON_WRITE(RS400_NB_MC_DATA, (val)); \ - RADEON_WRITE(RS400_NB_MC_INDEX, 0x7f); \ -} while (0) - #define RADEON_WRITE_PCIE(addr, val) \ do { \ RADEON_WRITE8(RADEON_PCIE_INDEX, \ @@ -1120,12 +1108,20 @@ do { \ RADEON_WRITE(RADEON_PCIE_DATA, (val)); \ } while (0) -#define RADEON_WRITE_MCIND(addr, val) \ - do { \ - RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ - RADEON_WRITE(R520_MC_IND_DATA, (val)); \ - RADEON_WRITE(R520_MC_IND_INDEX, 0); \ - } while (0) +#define R500_WRITE_MCIND(addr, val) \ +do { \ + RADEON_WRITE(R520_MC_IND_INDEX, 0xff0000 | ((addr) & 0xff)); \ + RADEON_WRITE(R520_MC_IND_DATA, (val)); \ + RADEON_WRITE(R520_MC_IND_INDEX, 0); \ +} while (0) + +#define RS480_WRITE_MCIND(addr, val) \ +do { \ + RADEON_WRITE(RS480_NB_MC_INDEX, \ + ((addr) & 0xff) | RS480_NB_MC_IND_WR_EN); \ + RADEON_WRITE(RS480_NB_MC_DATA, (val)); \ + RADEON_WRITE(RS480_NB_MC_INDEX, 0xff); \ +} while (0) #define RS690_WRITE_MCIND(addr, val) \ do { \ @@ -1134,6 +1130,14 @@ do { \ RADEON_WRITE(RS690_MC_INDEX, RS690_MC_INDEX_WR_ACK); \ } while (0) +#define IGP_WRITE_MCIND(addr, val) \ +do { \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) \ + RS690_WRITE_MCIND(addr, val); \ + else \ + RS480_WRITE_MCIND(addr, val); \ +} while (0) + #define CP_PACKET0( reg, n ) \ (RADEON_CP_PACKET0 | ((n) << 16) | ((reg) >> 2)) #define CP_PACKET0_TABLE( reg, n ) \ -- cgit v0.10.2 From d7463eb41d88a39de2653fd41857c4ccddb8707b Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:46:36 +1000 Subject: drm/radeon: write AGP_BASE_2 on chips that support it. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 3a42498..fc0820c 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -472,6 +472,8 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) + RADEON_WRITE(RADEON_AGP_BASE_2, 0); radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | -- cgit v0.10.2 From 259434acccbc823ee8bc00b2d2689ccccd25e1fd Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:51:12 +1000 Subject: drm/radeon: fix pixcache and purge/cache flushing registers Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index 8f664af..a72c703 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -1346,7 +1346,7 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. /* Guess by Vladimir. * Set to 0A before 3D operations, set to 02 afterwards. */ -#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C +/*#define R300_RB3D_DSTCACHE_CTLSTAT 0x4E4C*/ # define R300_RB3D_DSTCACHE_UNKNOWN_02 0x00000002 # define R300_RB3D_DSTCACHE_UNKNOWN_0A 0x0000000A diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index fc0820c..8fce12e 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -161,16 +161,36 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv) dev_priv->stats.boxes |= RADEON_BOX_WAIT_IDLE; - tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT); - tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); - - for (i = 0; i < dev_priv->usec_timeout; i++) { - if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT) - & RADEON_RB3D_DC_BUSY)) { - return 0; + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { + tmp = RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + + for (i = 0; i < dev_priv->usec_timeout; i++) { + if (!(RADEON_READ(RADEON_RB3D_DSTCACHE_CTLSTAT) + & RADEON_RB3D_DC_BUSY)) { + return 0; + } + DRM_UDELAY(1); + } + } else { + /* 3D */ + tmp = RADEON_READ(R300_RB3D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp); + + /* 2D */ + tmp = RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT); + tmp |= RADEON_RB3D_DC_FLUSH_ALL; + RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + + for (i = 0; i < dev_priv->usec_timeout; i++) { + if (!(RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT) + & RADEON_RB3D_DC_BUSY)) { + return 0; + } + DRM_UDELAY(1); } - DRM_UDELAY(1); } #if RADEON_FIFO_DEBUG diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 3063b0f..5e6f4612 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -659,11 +659,18 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, # define RADEON_RB3D_ZC_FREE (1 << 2) # define RADEON_RB3D_ZC_FLUSH_ALL 0x5 # define RADEON_RB3D_ZC_BUSY (1 << 31) +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZC_FLUSH (1 << 0) +# define R300_ZC_FREE (1 << 1) +# define R300_ZC_FLUSH_ALL 0x3 +# define R300_ZC_BUSY (1 << 31) #define RADEON_RB3D_DSTCACHE_CTLSTAT 0x325c # define RADEON_RB3D_DC_FLUSH (3 << 0) # define RADEON_RB3D_DC_FREE (3 << 2) # define RADEON_RB3D_DC_FLUSH_ALL 0xf # define RADEON_RB3D_DC_BUSY (1 << 31) +#define R300_RB3D_DSTCACHE_CTLSTAT 0x4e4c +# define R300_RB3D_DC_FINISH (1 << 4) #define RADEON_RB3D_ZSTENCILCNTL 0x1c2c # define RADEON_Z_TEST_MASK (7 << 4) # define RADEON_Z_TEST_ALWAYS (7 << 4) @@ -1178,23 +1185,43 @@ do { \ } while (0) #define RADEON_FLUSH_CACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_DC_FLUSH ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH); \ + } \ } while (0) #define RADEON_PURGE_CACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_DSTCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_DC_FLUSH_ALL ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_DC_FLUSH_ALL); \ + } \ } while (0) #define RADEON_FLUSH_ZCACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_ZC_FLUSH ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_ZC_FLUSH); \ + } else { \ + OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(R300_ZC_FLUSH); \ + } \ } while (0) #define RADEON_PURGE_ZCACHE() do { \ - OUT_RING( CP_PACKET0( RADEON_RB3D_ZCACHE_CTLSTAT, 0 ) ); \ - OUT_RING( RADEON_RB3D_ZC_FLUSH_ALL ); \ + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV280) { \ + OUT_RING(CP_PACKET0(RADEON_RB3D_ZCACHE_CTLSTAT, 0)); \ + OUT_RING(RADEON_RB3D_ZC_FLUSH_ALL); \ + } else { \ + OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); \ + OUT_RING(R300_ZC_FLUSH_ALL); \ + } \ } while (0) /* ================================================================ -- cgit v0.10.2 From d396db321bcaec54345e7e9e87cea8482d6ae3a8 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:54:06 +1000 Subject: drm/radeon: fixup radeon_do_engine_reset Cleanup do engine reset for different chip families. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 8fce12e..77bd90f 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -418,12 +418,13 @@ static void radeon_do_cp_stop(drm_radeon_private_t * dev_priv) static int radeon_do_engine_reset(struct drm_device * dev) { drm_radeon_private_t *dev_priv = dev->dev_private; - u32 clock_cntl_index, mclk_cntl, rbbm_soft_reset; + u32 clock_cntl_index = 0, mclk_cntl = 0, rbbm_soft_reset; DRM_DEBUG("\n"); radeon_do_pixcache_flush(dev_priv); - if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) { + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) { + /* may need something similar for newer chips */ clock_cntl_index = RADEON_READ(RADEON_CLOCK_CNTL_INDEX); mclk_cntl = RADEON_READ_PLL(dev, RADEON_MCLK_CNTL); @@ -434,28 +435,30 @@ static int radeon_do_engine_reset(struct drm_device * dev) RADEON_FORCEON_YCLKB | RADEON_FORCEON_MC | RADEON_FORCEON_AIC)); + } - rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); - - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | - RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB)); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & - ~(RADEON_SOFT_RESET_CP | - RADEON_SOFT_RESET_HI | - RADEON_SOFT_RESET_SE | - RADEON_SOFT_RESET_RE | - RADEON_SOFT_RESET_PP | - RADEON_SOFT_RESET_E2 | - RADEON_SOFT_RESET_RB))); - RADEON_READ(RADEON_RBBM_SOFT_RESET); - + rbbm_soft_reset = RADEON_READ(RADEON_RBBM_SOFT_RESET); + + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset | + RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB)); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + RADEON_WRITE(RADEON_RBBM_SOFT_RESET, (rbbm_soft_reset & + ~(RADEON_SOFT_RESET_CP | + RADEON_SOFT_RESET_HI | + RADEON_SOFT_RESET_SE | + RADEON_SOFT_RESET_RE | + RADEON_SOFT_RESET_PP | + RADEON_SOFT_RESET_E2 | + RADEON_SOFT_RESET_RB))); + RADEON_READ(RADEON_RBBM_SOFT_RESET); + + if ((dev_priv->flags & RADEON_FAMILY_MASK) <= CHIP_RV410) { RADEON_WRITE_PLL(RADEON_MCLK_CNTL, mclk_cntl); RADEON_WRITE(RADEON_CLOCK_CNTL_INDEX, clock_cntl_index); RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); -- cgit v0.10.2 From 5b92c4045eaa42441b7ec249a406e4110ea400d4 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Wed, 28 May 2008 11:57:40 +1000 Subject: drm/radeon: init pipe setup in kernel code. This inits the card pipes in the kernel and lets userspace getparam the correct setup. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 77bd90f..5991875 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -247,6 +247,50 @@ static int radeon_do_wait_for_idle(drm_radeon_private_t * dev_priv) return -EBUSY; } +static void radeon_init_pipes(drm_radeon_private_t *dev_priv) +{ + uint32_t gb_tile_config, gb_pipe_sel = 0; + + /* RS4xx/RS6xx/R4xx/R5xx */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R420) { + gb_pipe_sel = RADEON_READ(R400_GB_PIPE_SELECT); + dev_priv->num_gb_pipes = ((gb_pipe_sel >> 12) & 0x3) + 1; + } else { + /* R3xx */ + if (((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R300) || + ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_R350)) { + dev_priv->num_gb_pipes = 2; + } else { + /* R3Vxx */ + dev_priv->num_gb_pipes = 1; + } + } + DRM_INFO("Num pipes: %d\n", dev_priv->num_gb_pipes); + + gb_tile_config = (R300_ENABLE_TILING | R300_TILE_SIZE_16 /*| R300_SUBPIXEL_1_16*/); + + switch (dev_priv->num_gb_pipes) { + case 2: gb_tile_config |= R300_PIPE_COUNT_R300; break; + case 3: gb_tile_config |= R300_PIPE_COUNT_R420_3P; break; + case 4: gb_tile_config |= R300_PIPE_COUNT_R420; break; + default: + case 1: gb_tile_config |= R300_PIPE_COUNT_RV350; break; + } + + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { + RADEON_WRITE_PLL(R500_DYN_SCLK_PWMEM_PIPE, (1 | ((gb_pipe_sel >> 8) & 0xf) << 4)); + RADEON_WRITE(R500_SU_REG_DEST, ((1 << dev_priv->num_gb_pipes) - 1)); + } + RADEON_WRITE(R300_GB_TILE_CONFIG, gb_tile_config); + radeon_do_wait_for_idle(dev_priv); + RADEON_WRITE(R300_DST_PIPE_CONFIG, RADEON_READ(R300_DST_PIPE_CONFIG) | R300_PIPE_AUTO_CONFIG); + RADEON_WRITE(R300_RB2D_DSTCACHE_MODE, (RADEON_READ(R300_RB2D_DSTCACHE_MODE) | + R300_DC_AUTOFLUSH_ENABLE | + R300_DC_DC_DISABLE_IGNORE_PE)); + + +} + /* ================================================================ * CP control, initialization */ @@ -464,6 +508,10 @@ static int radeon_do_engine_reset(struct drm_device * dev) RADEON_WRITE(RADEON_RBBM_SOFT_RESET, rbbm_soft_reset); } + /* setup the raster pipes */ + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R300) + radeon_init_pipes(dev_priv); + /* Reset the CP ring */ radeon_do_cp_reset(dev_priv); diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index aab82e1..68b0608 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -669,6 +669,7 @@ typedef struct drm_radeon_indirect { #define RADEON_PARAM_CARD_TYPE 12 #define RADEON_PARAM_VBLANK_CRTC 13 /* VBLANK CRTC */ #define RADEON_PARAM_FB_LOCATION 14 /* FB location */ +#define RADEON_PARAM_NUM_GB_PIPES 15 /* num GB pipes */ typedef struct drm_radeon_getparam { int param; diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index 5e6f4612..c3615cf 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -307,6 +307,8 @@ typedef struct drm_radeon_private { /* starting from here on, data is preserved accross an open */ uint32_t flags; /* see radeon_chip_flags */ unsigned long fb_aper_offset; + + int num_gb_pipes; } drm_radeon_private_t; typedef struct drm_radeon_buf_priv { @@ -529,6 +531,27 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RS480_AGP_BASE_2 0x0164 #define RADEON_AGP_BASE 0x0170 +/* pipe config regs */ +#define R400_GB_PIPE_SELECT 0x402c +#define R500_DYN_SCLK_PWMEM_PIPE 0x000d /* PLL */ +#define R500_SU_REG_DEST 0x42c8 +#define R300_GB_TILE_CONFIG 0x4018 +# define R300_ENABLE_TILING (1 << 0) +# define R300_PIPE_COUNT_RV350 (0 << 1) +# define R300_PIPE_COUNT_R300 (3 << 1) +# define R300_PIPE_COUNT_R420_3P (6 << 1) +# define R300_PIPE_COUNT_R420 (7 << 1) +# define R300_TILE_SIZE_8 (0 << 4) +# define R300_TILE_SIZE_16 (1 << 4) +# define R300_TILE_SIZE_32 (2 << 4) +# define R300_SUBPIXEL_1_12 (0 << 16) +# define R300_SUBPIXEL_1_16 (1 << 16) +#define R300_DST_PIPE_CONFIG 0x170c +# define R300_PIPE_AUTO_CONFIG (1 << 31) +#define R300_RB2D_DSTCACHE_MODE 0x3428 +# define R300_DC_AUTOFLUSH_ENABLE (1 << 8) +# define R300_DC_DC_DISABLE_IGNORE_PE (1 << 17) + #define RADEON_RB3D_COLOROFFSET 0x1c40 #define RADEON_RB3D_COLORPITCH 0x1c48 diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index 6f75512..eee1357 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -3037,6 +3037,9 @@ static int radeon_cp_getparam(struct drm_device *dev, void *data, struct drm_fil case RADEON_PARAM_FB_LOCATION: value = radeon_read_fb_location(dev_priv); break; + case RADEON_PARAM_NUM_GB_PIPES: + value = dev_priv->num_gb_pipes; + break; default: DRM_DEBUG("Invalid parameter %d\n", param->param); return -EINVAL; -- cgit v0.10.2 From c0beb2a723d69934a53f51a9d664c5b1dbbf634b Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Wed, 28 May 2008 13:52:28 +1000 Subject: drm/radeon: add initial r500 support. This contains all the command buffer processing for the r500 cards. It doesn't yet contain vblank support. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index f535812..329733a 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -189,18 +189,12 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_RE_CULL_CNTL, 1); ADD_RANGE(0x42C0, 2); ADD_RANGE(R300_RS_CNTL_0, 2); - ADD_RANGE(R300_RS_INTERP_0, 8); - ADD_RANGE(R300_RS_ROUTE_0, 8); + ADD_RANGE(0x43A4, 2); ADD_RANGE(0x43E8, 1); - ADD_RANGE(R300_PFS_CNTL_0, 3); - ADD_RANGE(R300_PFS_NODE_0, 4); - ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(0x46A4, 5); - ADD_RANGE(R300_PFS_INSTR0_0, 64); - ADD_RANGE(R300_PFS_INSTR1_0, 64); - ADD_RANGE(R300_PFS_INSTR2_0, 64); - ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(R300_RE_FOG_STATE, 1); ADD_RANGE(R300_FOG_COLOR_R, 3); ADD_RANGE(R300_PP_ALPHA_TEST, 2); @@ -241,7 +235,25 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_RV515) { - ADD_RANGE(0x4074, 16); + ADD_RANGE(R500_VAP_INDEX_OFFSET, 1); + ADD_RANGE(R500_US_CONFIG, 2); + ADD_RANGE(R500_US_CODE_ADDR, 3); + ADD_RANGE(R500_US_FC_CTRL, 1); + ADD_RANGE(R500_RS_IP_0, 16); + ADD_RANGE(R500_RS_INST_0, 16); + ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2); + ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2); + } else { + ADD_RANGE(R300_PFS_CNTL_0, 3); + ADD_RANGE(R300_PFS_NODE_0, 4); + ADD_RANGE(R300_PFS_TEXI_0, 64); + ADD_RANGE(R300_PFS_INSTR0_0, 64); + ADD_RANGE(R300_PFS_INSTR1_0, 64); + ADD_RANGE(R300_PFS_INSTR2_0, 64); + ADD_RANGE(R300_PFS_INSTR3_0, 64); + ADD_RANGE(R300_RS_INTERP_0, 8); + ADD_RANGE(R300_RS_ROUTE_0, 8); + } } @@ -829,6 +841,54 @@ static int r300_scratch(drm_radeon_private_t *dev_priv, } /** + * Uploads user-supplied vertex program instructions or parameters onto + * the graphics card. + * Called by r300_do_cp_cmdbuf. + */ +static inline int r300_emit_r500fp(drm_radeon_private_t *dev_priv, + drm_radeon_kcmd_buffer_t *cmdbuf, + drm_r300_cmd_header_t header) +{ + int sz; + int addr; + int type; + int clamp; + int stride; + RING_LOCALS; + + sz = header.r500fp.count; + /* address is 9 bits 0 - 8, bit 1 of flags is part of address */ + addr = ((header.r500fp.adrhi_flags & 1) << 8) | header.r500fp.adrlo; + + type = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_TYPE); + clamp = !!(header.r500fp.adrhi_flags & R500FP_CONSTANT_CLAMP); + + addr |= (type << 16); + addr |= (clamp << 17); + + stride = type ? 4 : 6; + + DRM_DEBUG("r500fp %d %d type: %d\n", sz, addr, type); + if (!sz) + return 0; + if (sz * stride * 4 > cmdbuf->bufsz) + return -EINVAL; + + BEGIN_RING(3 + sz * stride); + OUT_RING_REG(R500_GA_US_VECTOR_INDEX, addr); + OUT_RING(CP_PACKET0_TABLE(R500_GA_US_VECTOR_DATA, sz * stride - 1)); + OUT_RING_TABLE((int *)cmdbuf->buf, sz * stride); + + ADVANCE_RING(); + + cmdbuf->buf += sz * stride * 4; + cmdbuf->bufsz -= sz * stride * 4; + + return 0; +} + + +/** * Parses and validates a user-supplied command buffer and emits appropriate * commands on the DMA ring buffer. * Called by the ioctl handler function radeon_cp_cmdbuf. @@ -963,6 +1023,19 @@ int r300_do_cp_cmdbuf(struct drm_device *dev, } break; + case R300_CMD_R500FP: + if ((dev_priv->flags & RADEON_FAMILY_MASK) < CHIP_RV515) { + DRM_ERROR("Calling r500 command on r300 card\n"); + ret = -EINVAL; + goto cleanup; + } + DRM_DEBUG("R300_CMD_R500FP\n"); + ret = r300_emit_r500fp(dev_priv, cmdbuf, header); + if (ret) { + DRM_ERROR("r300_emit_r500fp failed\n"); + goto cleanup; + } + break; default: DRM_ERROR("bad cmd_type %i at %p\n", header.header.cmd_type, diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a72c703..a883d10 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -1623,4 +1623,20 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. */ #define R300_CP_CMD_BITBLT_MULTI 0xC0009B00 +#define R500_VAP_INDEX_OFFSET 0x208c + +#define R500_GA_US_VECTOR_INDEX 0x4250 +#define R500_GA_US_VECTOR_DATA 0x4254 + +#define R500_RS_IP_0 0x4074 +#define R500_RS_INST_0 0x4320 + +#define R500_US_CONFIG 0x4600 + +#define R500_US_FC_CTRL 0x4624 +#define R500_US_CODE_ADDR 0x4630 + +#define R500_RB3D_COLOR_CLEAR_VALUE_AR 0x46c0 +#define R500_RB3D_CONSTANT_COLOR_AR 0x4ef8 + #endif /* _R300_REG_H */ diff --git a/drivers/char/drm/radeon_drm.h b/drivers/char/drm/radeon_drm.h index 68b0608..73ff51f 100644 --- a/drivers/char/drm/radeon_drm.h +++ b/drivers/char/drm/radeon_drm.h @@ -240,6 +240,7 @@ typedef union { # define R300_NEW_WAIT_2D_2D_CLEAN_3D_3D_CLEAN 0x8 #define R300_CMD_SCRATCH 8 +#define R300_CMD_R500FP 9 typedef union { unsigned int u; @@ -268,6 +269,9 @@ typedef union { struct { unsigned char cmd_type, reg, n_bufs, flags; } scratch; + struct { + unsigned char cmd_type, count, adrlo, adrhi_flags; + } r500fp; } drm_r300_cmd_header_t; #define RADEON_FRONT 0x1 @@ -278,6 +282,9 @@ typedef union { #define RADEON_USE_HIERZ 0x40000000 #define RADEON_USE_COMP_ZBUF 0x20000000 +#define R500FP_CONSTANT_TYPE (1 << 1) +#define R500FP_CONSTANT_CLAMP (1 << 2) + /* Primitive types */ #define RADEON_POINTS 0x1 diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index c3615cf..d0dc47c 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -38,7 +38,7 @@ #define DRIVER_NAME "radeon" #define DRIVER_DESC "ATI Radeon" -#define DRIVER_DATE "20060524" +#define DRIVER_DATE "20080528" /* Interface history: * @@ -98,9 +98,10 @@ * 1.26- Add support for variable size PCI(E) gart aperture * 1.27- Add support for IGP GART * 1.28- Add support for VBL on CRTC2 + * 1.29- R500 3D cmd buffer support */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 28 +#define DRIVER_MINOR 29 #define DRIVER_PATCHLEVEL 0 /* @@ -294,6 +295,7 @@ typedef struct drm_radeon_private { int vblank_crtc; uint32_t irq_enable_reg; int irq_enabled; + uint32_t r500_disp_irq_reg; struct radeon_surface surfaces[RADEON_MAX_SURFACES]; struct radeon_virt_surface virt_surfaces[2 * RADEON_MAX_SURFACES]; @@ -1103,6 +1105,31 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define R200_VAP_PVS_CNTL_1 0x22D0 +#define R500_D1CRTC_STATUS 0x609c +#define R500_D2CRTC_STATUS 0x689c +#define R500_CRTC_V_BLANK (1<<0) + +#define R500_D1CRTC_FRAME_COUNT 0x60a4 +#define R500_D2CRTC_FRAME_COUNT 0x68a4 + +#define R500_D1MODE_V_COUNTER 0x6530 +#define R500_D2MODE_V_COUNTER 0x6d30 + +#define R500_D1MODE_VBLANK_STATUS 0x6534 +#define R500_D2MODE_VBLANK_STATUS 0x6d34 +#define R500_VBLANK_OCCURED (1<<0) +#define R500_VBLANK_ACK (1<<4) +#define R500_VBLANK_STAT (1<<12) +#define R500_VBLANK_INT (1<<16) + +#define R500_DxMODE_INT_MASK 0x6540 +#define R500_D1MODE_INT_MASK (1<<0) +#define R500_D2MODE_INT_MASK (1<<8) + +#define R500_DISP_INTERRUPT_STATUS 0x7edc +#define R500_D1_VBLANK_INTERRUPT (1 << 4) +#define R500_D2_VBLANK_INTERRUPT (1 << 5) + /* Constants */ #define RADEON_MAX_USEC_TIMEOUT 100000 /* 100 ms */ -- cgit v0.10.2 From 9156cf09f56150ed89f77eaa4c386a07789776a0 Mon Sep 17 00:00:00 2001 From: Roland Scheidegger Date: Thu, 19 Jun 2008 11:36:04 +1000 Subject: drm/radeon: fix texture uploads with large 3d textures (bug 13980) Texture uploads could hit the blitter coordinate limit, adjust the texture offset when uploading the pieces. Make sure to check the end address of the upload too. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_state.c b/drivers/char/drm/radeon_state.c index eee1357..11c146b 100644 --- a/drivers/char/drm/radeon_state.c +++ b/drivers/char/drm/radeon_state.c @@ -1662,7 +1662,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, u32 height; int i; u32 texpitch, microtile; - u32 offset; + u32 offset, byte_offset; RING_LOCALS; if (radeon_check_and_fixup_offset(dev_priv, file_priv, &tex->offset)) { @@ -1727,6 +1727,13 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, } else microtile = 0; + /* this might fail for zero-sized uploads - are those illegal? */ + if (!radeon_check_offset(dev_priv, tex->offset + image->height * + blit_width - 1)) { + DRM_ERROR("Invalid final destination offset\n"); + return -EINVAL; + } + DRM_DEBUG("tex=%dx%d blit=%d\n", tex_width, tex->height, blit_width); do { @@ -1840,6 +1847,7 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, } #undef RADEON_COPY_MT + byte_offset = (image->y & ~2047) * blit_width; buf->file_priv = file_priv; buf->used = size; offset = dev_priv->gart_buffers_offset + buf->offset; @@ -1854,9 +1862,9 @@ static int radeon_cp_dispatch_texture(struct drm_device * dev, RADEON_DP_SRC_SOURCE_MEMORY | RADEON_GMC_CLR_CMP_CNTL_DIS | RADEON_GMC_WR_MSK_DIS); OUT_RING((spitch << 22) | (offset >> 10)); - OUT_RING((texpitch << 22) | (tex->offset >> 10)); + OUT_RING((texpitch << 22) | ((tex->offset >> 10) + (byte_offset >> 10))); OUT_RING(0); - OUT_RING((image->x << 16) | image->y); + OUT_RING((image->x << 16) | (image->y % 2048)); OUT_RING((image->width << 16) | height); RADEON_WAIT_UNTIL_2D_IDLE(); ADVANCE_RING(); -- cgit v0.10.2 From 70b13d510fc9d137e362b7db3ac5b14b50d78477 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 11:40:44 +1000 Subject: drm/r500: add support for AGP based cards. AGP registers weren't programmed properly for r500 cards. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 5991875..f5e22bf 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -113,6 +113,27 @@ static void radeon_write_agp_location(drm_radeon_private_t *dev_priv, u32 agp_lo RADEON_WRITE(RADEON_MC_AGP_LOCATION, agp_loc); } +static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) +{ + u32 agp_base_hi = upper_32_bits(agp_base); + u32 agp_base_lo = agp_base & 0xffffffff; + + if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RV515) { + R500_WRITE_MCIND(RV515_MC_AGP_BASE, agp_base_lo); + R500_WRITE_MCIND(RV515_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { + RS690_WRITE_MCIND(RS690_MC_AGP_BASE, agp_base_lo); + RS690_WRITE_MCIND(RS690_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) { + R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo); + R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi); + } else { + RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); + if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) + RADEON_WRITE(RADEON_AGP_BASE_2, agp_base_hi); + } +} + static int RADEON_READ_PLL(struct drm_device * dev, int addr) { drm_radeon_private_t *dev_priv = dev->dev_private; @@ -542,9 +563,8 @@ static void radeon_cp_init_ring_buffer(struct drm_device * dev, #if __OS_HAS_AGP if (dev_priv->flags & RADEON_IS_AGP) { - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev->agp->base); - if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) - RADEON_WRITE(RADEON_AGP_BASE_2, 0); + radeon_write_agp_base(dev_priv, dev->agp->base); + radeon_write_agp_location(dev_priv, (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & 0xffff0000) | diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index d0dc47c..f43e1f9 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -522,9 +522,13 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RV515_MC_FB_LOCATION 0x01 #define RV515_MC_AGP_LOCATION 0x02 +#define RV515_MC_AGP_BASE 0x03 +#define RV515_MC_AGP_BASE_2 0x04 #define R520_MC_FB_LOCATION 0x04 #define R520_MC_AGP_LOCATION 0x05 +#define R520_MC_AGP_BASE 0x06 +#define R520_MC_AGP_BASE_2 0x07 #define RADEON_MPP_TB_CONFIG 0x01c0 #define RADEON_MEM_CNTL 0x0140 -- cgit v0.10.2 From 7ecabc53a29bb31689fa1852a926e021179a64a6 Mon Sep 17 00:00:00 2001 From: Dennis Kasprzyk Date: Thu, 19 Jun 2008 12:36:55 +1000 Subject: drm/radeon: Restore sw interrupt on resume Fixes performance drop after suspend/resume on some systems. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index f5e22bf..d4feccb 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -1292,6 +1292,7 @@ static int radeon_do_resume_cp(struct drm_device * dev) radeon_cp_init_ring_buffer(dev, dev_priv); radeon_do_engine_reset(dev); + radeon_enable_interrupt(dev); DRM_DEBUG("radeon_do_resume_cp() complete\n"); diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index f43e1f9..e20b5d8 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -386,6 +386,7 @@ extern irqreturn_t radeon_driver_irq_handler(DRM_IRQ_ARGS); extern void radeon_driver_irq_preinstall(struct drm_device * dev); extern void radeon_driver_irq_postinstall(struct drm_device * dev); extern void radeon_driver_irq_uninstall(struct drm_device * dev); +extern void radeon_enable_interrupt(struct drm_device *dev); extern int radeon_vblank_crtc_get(struct drm_device *dev); extern int radeon_vblank_crtc_set(struct drm_device *dev, int64_t value); diff --git a/drivers/char/drm/radeon_irq.c b/drivers/char/drm/radeon_irq.c index 009af38..ee40d19 100644 --- a/drivers/char/drm/radeon_irq.c +++ b/drivers/char/drm/radeon_irq.c @@ -234,7 +234,7 @@ int radeon_irq_wait(struct drm_device *dev, void *data, struct drm_file *file_pr return radeon_wait_irq(dev, irqwait->irq_seq); } -static void radeon_enable_interrupt(struct drm_device *dev) +void radeon_enable_interrupt(struct drm_device *dev) { drm_radeon_private_t *dev_priv = (drm_radeon_private_t *) dev->dev_private; -- cgit v0.10.2 From 5cfb6956073a9e42d44a26790b7800980634d037 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Jun 2008 12:38:29 +1000 Subject: drm/radeon: switch IGP gart to use radeon_write_agp_base() Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index d4feccb..441645e 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -127,6 +127,9 @@ static void radeon_write_agp_base(drm_radeon_private_t *dev_priv, u64 agp_base) } else if ((dev_priv->flags & RADEON_FAMILY_MASK) > CHIP_RV515) { R500_WRITE_MCIND(R520_MC_AGP_BASE, agp_base_lo); R500_WRITE_MCIND(R520_MC_AGP_BASE_2, agp_base_hi); + } else if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS480) { + RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); + RADEON_WRITE(RS480_AGP_BASE_2, 0); } else { RADEON_WRITE(RADEON_AGP_BASE, agp_base_lo); if ((dev_priv->flags & RADEON_FAMILY_MASK) >= CHIP_R200) @@ -741,14 +744,7 @@ static void radeon_set_igpgart(drm_radeon_private_t * dev_priv, int on) IGP_WRITE_MCIND(RS480_AGP_MODE_CNTL, ((1 << RS480_REQ_TYPE_SNOOP_SHIFT) | RS480_REQ_TYPE_SNOOP_DIS)); - if ((dev_priv->flags & RADEON_FAMILY_MASK) == CHIP_RS690) { - IGP_WRITE_MCIND(RS690_MC_AGP_BASE, - (unsigned int)dev_priv->gart_vm_start); - IGP_WRITE_MCIND(RS690_MC_AGP_BASE_2, 0); - } else { - RADEON_WRITE(RADEON_AGP_BASE, (unsigned int)dev_priv->gart_vm_start); - RADEON_WRITE(RS480_AGP_BASE_2, 0); - } + radeon_write_agp_base(dev_priv, dev_priv->gart_vm_start); dev_priv->gart_size = 32*1024*1024; temp = (((dev_priv->gart_vm_start - 1 + dev_priv->gart_size) & -- cgit v0.10.2 From 5e35eff13f7dd0f5c1d82b3b4708b2f7a5f44113 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Thu, 19 Jun 2008 12:39:23 +1000 Subject: drm/radeon: use DSTCACHE_CTLSTAT rather than RB2D_DSTCACHE_CTLSTAT According to the hw guys, you should use DSTCACHE_CTLSTAT to flush the 2D dst cache rather than RB2D_DSTCACHE_CTLSTAT. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/radeon_cp.c b/drivers/char/drm/radeon_cp.c index 441645e..e53158f 100644 --- a/drivers/char/drm/radeon_cp.c +++ b/drivers/char/drm/radeon_cp.c @@ -204,12 +204,12 @@ static int radeon_do_pixcache_flush(drm_radeon_private_t * dev_priv) RADEON_WRITE(R300_RB3D_DSTCACHE_CTLSTAT, tmp); /* 2D */ - tmp = RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT); + tmp = RADEON_READ(R300_DSTCACHE_CTLSTAT); tmp |= RADEON_RB3D_DC_FLUSH_ALL; - RADEON_WRITE(RADEON_RB3D_DSTCACHE_CTLSTAT, tmp); + RADEON_WRITE(R300_DSTCACHE_CTLSTAT, tmp); for (i = 0; i < dev_priv->usec_timeout; i++) { - if (!(RADEON_READ(RADEON_RB2D_DSTCACHE_CTLSTAT) + if (!(RADEON_READ(R300_DSTCACHE_CTLSTAT) & RADEON_RB3D_DC_BUSY)) { return 0; } diff --git a/drivers/char/drm/radeon_drv.h b/drivers/char/drm/radeon_drv.h index e20b5d8..3f0eca9 100644 --- a/drivers/char/drm/radeon_drv.h +++ b/drivers/char/drm/radeon_drv.h @@ -662,11 +662,12 @@ extern int r300_do_cp_cmdbuf(struct drm_device * dev, #define RADEON_PP_TXFILTER_1 0x1c6c #define RADEON_PP_TXFILTER_2 0x1c84 -#define RADEON_RB2D_DSTCACHE_CTLSTAT 0x342c -# define RADEON_RB2D_DC_FLUSH (3 << 0) -# define RADEON_RB2D_DC_FREE (3 << 2) -# define RADEON_RB2D_DC_FLUSH_ALL 0xf -# define RADEON_RB2D_DC_BUSY (1 << 31) +#define R300_RB2D_DSTCACHE_CTLSTAT 0x342c /* use R300_DSTCACHE_CTLSTAT */ +#define R300_DSTCACHE_CTLSTAT 0x1714 +# define R300_RB2D_DC_FLUSH (3 << 0) +# define R300_RB2D_DC_FREE (3 << 2) +# define R300_RB2D_DC_FLUSH_ALL 0xf +# define R300_RB2D_DC_BUSY (1 << 31) #define RADEON_RB3D_CNTL 0x1c3c # define RADEON_ALPHA_BLEND_ENABLE (1 << 0) # define RADEON_PLANE_MASK_ENABLE (1 << 1) -- cgit v0.10.2 From 21efa2bac91b8d12064617c5a35492ec982544eb Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 13:01:58 +1000 Subject: drm/radeon: add hier-z registers for r300 and r500 chipsets diff --git a/drivers/char/drm/r300_cmdbuf.c b/drivers/char/drm/r300_cmdbuf.c index 329733a..702df45 100644 --- a/drivers/char/drm/r300_cmdbuf.c +++ b/drivers/char/drm/r300_cmdbuf.c @@ -190,7 +190,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(0x42C0, 2); ADD_RANGE(R300_RS_CNTL_0, 2); - ADD_RANGE(0x43A4, 2); + ADD_RANGE(R300_SC_HYPERZ, 2); ADD_RANGE(0x43E8, 1); ADD_RANGE(0x46A4, 5); @@ -209,14 +209,12 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(0x4E50, 9); ADD_RANGE(0x4E88, 1); ADD_RANGE(0x4EA0, 2); - ADD_RANGE(R300_RB3D_ZSTENCIL_CNTL_0, 3); - ADD_RANGE(R300_RB3D_ZSTENCIL_FORMAT, 4); - ADD_RANGE_MARK(R300_RB3D_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ - ADD_RANGE(R300_RB3D_DEPTHPITCH, 1); - ADD_RANGE(0x4F28, 1); - ADD_RANGE(0x4F30, 2); - ADD_RANGE(0x4F44, 1); - ADD_RANGE(0x4F54, 1); + ADD_RANGE(R300_ZB_CNTL, 3); + ADD_RANGE(R300_ZB_FORMAT, 4); + ADD_RANGE_MARK(R300_ZB_DEPTHOFFSET, 1, MARK_CHECK_OFFSET); /* check offset */ + ADD_RANGE(R300_ZB_DEPTHPITCH, 1); + ADD_RANGE(R300_ZB_DEPTHCLEARVALUE, 1); + ADD_RANGE(R300_ZB_ZMASK_OFFSET, 13); ADD_RANGE(R300_TX_FILTER_0, 16); ADD_RANGE(R300_TX_FILTER1_0, 16); @@ -229,7 +227,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R300_TX_BORDER_COLOR_0, 16); /* Sporadic registers used as primitives are emitted */ - ADD_RANGE(R300_RB3D_ZCACHE_CTLSTAT, 1); + ADD_RANGE(R300_ZB_ZCACHE_CTLSTAT, 1); ADD_RANGE(R300_RB3D_DSTCACHE_CTLSTAT, 1); ADD_RANGE(R300_VAP_INPUT_ROUTE_0_0, 8); ADD_RANGE(R300_VAP_INPUT_ROUTE_1_0, 8); @@ -243,6 +241,7 @@ void r300_init_reg_flags(struct drm_device *dev) ADD_RANGE(R500_RS_INST_0, 16); ADD_RANGE(R500_RB3D_COLOR_CLEAR_VALUE_AR, 2); ADD_RANGE(R500_RB3D_CONSTANT_COLOR_AR, 2); + ADD_RANGE(R500_ZB_FIFO_SIZE, 2); } else { ADD_RANGE(R300_PFS_CNTL_0, 3); ADD_RANGE(R300_PFS_NODE_0, 4); @@ -719,8 +718,9 @@ static __inline__ void r300_pacify(drm_radeon_private_t *dev_priv) BEGIN_RING(6); OUT_RING(CP_PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0)); OUT_RING(R300_RB3D_DSTCACHE_UNKNOWN_0A); - OUT_RING(CP_PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0)); - OUT_RING(R300_RB3D_ZCACHE_UNKNOWN_03); + OUT_RING(CP_PACKET0(R300_ZB_ZCACHE_CTLSTAT, 0)); + OUT_RING(R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE| + R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE); OUT_RING(CP_PACKET3(RADEON_CP_NOP, 0)); OUT_RING(0x0); ADVANCE_RING(); diff --git a/drivers/char/drm/r300_reg.h b/drivers/char/drm/r300_reg.h index a883d10..a6802f2 100644 --- a/drivers/char/drm/r300_reg.h +++ b/drivers/char/drm/r300_reg.h @@ -702,6 +702,27 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_RS_ROUTE_1_UNKNOWN11 (1 << 11) /* END: Rasterization / Interpolators - many guesses */ +/* Hierarchical Z Enable */ +#define R300_SC_HYPERZ 0x43a4 +# define R300_SC_HYPERZ_DISABLE (0 << 0) +# define R300_SC_HYPERZ_ENABLE (1 << 0) +# define R300_SC_HYPERZ_MIN (0 << 1) +# define R300_SC_HYPERZ_MAX (1 << 1) +# define R300_SC_HYPERZ_ADJ_256 (0 << 2) +# define R300_SC_HYPERZ_ADJ_128 (1 << 2) +# define R300_SC_HYPERZ_ADJ_64 (2 << 2) +# define R300_SC_HYPERZ_ADJ_32 (3 << 2) +# define R300_SC_HYPERZ_ADJ_16 (4 << 2) +# define R300_SC_HYPERZ_ADJ_8 (5 << 2) +# define R300_SC_HYPERZ_ADJ_4 (6 << 2) +# define R300_SC_HYPERZ_ADJ_2 (7 << 2) +# define R300_SC_HYPERZ_HZ_Z0MIN_NO (0 << 5) +# define R300_SC_HYPERZ_HZ_Z0MIN (1 << 5) +# define R300_SC_HYPERZ_HZ_Z0MAX_NO (0 << 6) +# define R300_SC_HYPERZ_HZ_Z0MAX (1 << 6) + +#define R300_SC_EDGERULE 0x43a8 + /* BEGIN: Scissors and cliprects */ /* There are four clipping rectangles. Their corner coordinates are inclusive. @@ -1355,19 +1376,14 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. * for this. * Bit (1<<8) is the "test" bit. so plain write is 6 - vd */ -#define R300_RB3D_ZSTENCIL_CNTL_0 0x4F00 -# define R300_RB3D_Z_DISABLED_1 0x00000010 -# define R300_RB3D_Z_DISABLED_2 0x00000014 -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 - -# define R300_RB3D_Z_TEST 0x00000012 -# define R300_RB3D_Z_TEST_AND_WRITE 0x00000016 -# define R300_RB3D_Z_WRITE_ONLY 0x00000006 -# define R300_RB3D_STENCIL_ENABLE 0x00000001 - -#define R300_RB3D_ZSTENCIL_CNTL_1 0x4F04 +#define R300_ZB_CNTL 0x4F00 +# define R300_STENCIL_ENABLE (1 << 0) +# define R300_Z_ENABLE (1 << 1) +# define R300_Z_WRITE_ENABLE (1 << 2) +# define R300_Z_SIGNED_COMPARE (1 << 3) +# define R300_STENCIL_FRONT_BACK (1 << 4) + +#define R300_ZB_ZSTENCILCNTL 0x4f04 /* functions */ # define R300_ZS_NEVER 0 # define R300_ZS_LESS 1 @@ -1387,52 +1403,166 @@ USE OR OTHER DEALINGS IN THE SOFTWARE. # define R300_ZS_INVERT 5 # define R300_ZS_INCR_WRAP 6 # define R300_ZS_DECR_WRAP 7 +# define R300_Z_FUNC_SHIFT 0 /* front and back refer to operations done for front and back faces, i.e. separate stencil function support */ -# define R300_RB3D_ZS1_DEPTH_FUNC_SHIFT 0 -# define R300_RB3D_ZS1_FRONT_FUNC_SHIFT 3 -# define R300_RB3D_ZS1_FRONT_FAIL_OP_SHIFT 6 -# define R300_RB3D_ZS1_FRONT_ZPASS_OP_SHIFT 9 -# define R300_RB3D_ZS1_FRONT_ZFAIL_OP_SHIFT 12 -# define R300_RB3D_ZS1_BACK_FUNC_SHIFT 15 -# define R300_RB3D_ZS1_BACK_FAIL_OP_SHIFT 18 -# define R300_RB3D_ZS1_BACK_ZPASS_OP_SHIFT 21 -# define R300_RB3D_ZS1_BACK_ZFAIL_OP_SHIFT 24 - -#define R300_RB3D_ZSTENCIL_CNTL_2 0x4F08 -# define R300_RB3D_ZS2_STENCIL_REF_SHIFT 0 -# define R300_RB3D_ZS2_STENCIL_MASK 0xFF -# define R300_RB3D_ZS2_STENCIL_MASK_SHIFT 8 -# define R300_RB3D_ZS2_STENCIL_WRITE_MASK_SHIFT 16 +# define R300_S_FRONT_FUNC_SHIFT 3 +# define R300_S_FRONT_SFAIL_OP_SHIFT 6 +# define R300_S_FRONT_ZPASS_OP_SHIFT 9 +# define R300_S_FRONT_ZFAIL_OP_SHIFT 12 +# define R300_S_BACK_FUNC_SHIFT 15 +# define R300_S_BACK_SFAIL_OP_SHIFT 18 +# define R300_S_BACK_ZPASS_OP_SHIFT 21 +# define R300_S_BACK_ZFAIL_OP_SHIFT 24 + +#define R300_ZB_STENCILREFMASK 0x4f08 +# define R300_STENCILREF_SHIFT 0 +# define R300_STENCILREF_MASK 0x000000ff +# define R300_STENCILMASK_SHIFT 8 +# define R300_STENCILMASK_MASK 0x0000ff00 +# define R300_STENCILWRITEMASK_SHIFT 16 +# define R300_STENCILWRITEMASK_MASK 0x00ff0000 /* gap */ -#define R300_RB3D_ZSTENCIL_FORMAT 0x4F10 -# define R300_DEPTH_FORMAT_16BIT_INT_Z (0 << 0) -# define R300_DEPTH_FORMAT_24BIT_INT_Z (2 << 0) - /* 16 bit format or some aditional bit ? */ -# define R300_DEPTH_FORMAT_UNK32 (32 << 0) +#define R300_ZB_FORMAT 0x4f10 +# define R300_DEPTHFORMAT_16BIT_INT_Z (0 << 0) +# define R300_DEPTHFORMAT_16BIT_13E3 (1 << 0) +# define R300_DEPTHFORMAT_24BIT_INT_Z_8BIT_STENCIL (2 << 0) +/* reserved up to (15 << 0) */ +# define R300_INVERT_13E3_LEADING_ONES (0 << 4) +# define R300_INVERT_13E3_LEADING_ZEROS (1 << 4) -#define R300_RB3D_EARLY_Z 0x4F14 -# define R300_EARLY_Z_DISABLE (0 << 0) -# define R300_EARLY_Z_ENABLE (1 << 0) +#define R300_ZB_ZTOP 0x4F14 +# define R300_ZTOP_DISABLE (0 << 0) +# define R300_ZTOP_ENABLE (1 << 0) /* gap */ -#define R300_RB3D_ZCACHE_CTLSTAT 0x4F18 /* GUESS */ -# define R300_RB3D_ZCACHE_UNKNOWN_01 0x1 -# define R300_RB3D_ZCACHE_UNKNOWN_03 0x3 +#define R300_ZB_ZCACHE_CTLSTAT 0x4f18 +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_NO_EFFECT (0 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FLUSH_FLUSH_AND_FREE (1 << 0) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_NO_EFFECT (0 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_FREE_FREE (1 << 1) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_IDLE (0 << 31) +# define R300_ZB_ZCACHE_CTLSTAT_ZC_BUSY_BUSY (1 << 31) + +#define R300_ZB_BW_CNTL 0x4f1c +# define R300_HIZ_DISABLE (0 << 0) +# define R300_HIZ_ENABLE (1 << 0) +# define R300_HIZ_MIN (0 << 1) +# define R300_HIZ_MAX (1 << 1) +# define R300_FAST_FILL_DISABLE (0 << 2) +# define R300_FAST_FILL_ENABLE (1 << 2) +# define R300_RD_COMP_DISABLE (0 << 3) +# define R300_RD_COMP_ENABLE (1 << 3) +# define R300_WR_COMP_DISABLE (0 << 4) +# define R300_WR_COMP_ENABLE (1 << 4) +# define R300_ZB_CB_CLEAR_RMW (0 << 5) +# define R300_ZB_CB_CLEAR_CACHE_LINEAR (1 << 5) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_DISABLE (0 << 6) +# define R300_FORCE_COMPRESSED_STENCIL_VALUE_ENABLE (1 << 6) + +# define R500_ZEQUAL_OPTIMIZE_ENABLE (0 << 7) +# define R500_ZEQUAL_OPTIMIZE_DISABLE (1 << 7) +# define R500_SEQUAL_OPTIMIZE_ENABLE (0 << 8) +# define R500_SEQUAL_OPTIMIZE_DISABLE (1 << 8) + +# define R500_BMASK_ENABLE (0 << 10) +# define R500_BMASK_DISABLE (1 << 10) +# define R500_HIZ_EQUAL_REJECT_DISABLE (0 << 11) +# define R500_HIZ_EQUAL_REJECT_ENABLE (1 << 11) +# define R500_HIZ_FP_EXP_BITS_DISABLE (0 << 12) +# define R500_HIZ_FP_EXP_BITS_1 (1 << 12) +# define R500_HIZ_FP_EXP_BITS_2 (2 << 12) +# define R500_HIZ_FP_EXP_BITS_3 (3 << 12) +# define R500_HIZ_FP_EXP_BITS_4 (4 << 12) +# define R500_HIZ_FP_EXP_BITS_5 (5 << 12) +# define R500_HIZ_FP_INVERT_LEADING_ONES (0 << 15) +# define R500_HIZ_FP_INVERT_LEADING_ZEROS (1 << 15) +# define R500_TILE_OVERWRITE_RECOMPRESSION_ENABLE (0 << 16) +# define R500_TILE_OVERWRITE_RECOMPRESSION_DISABLE (1 << 16) +# define R500_CONTIGUOUS_6XAA_SAMPLES_ENABLE (0 << 17) +# define R500_CONTIGUOUS_6XAA_SAMPLES_DISABLE (1 << 17) +# define R500_PEQ_PACKING_DISABLE (0 << 18) +# define R500_PEQ_PACKING_ENABLE (1 << 18) +# define R500_COVERED_PTR_MASKING_DISABLE (0 << 18) +# define R500_COVERED_PTR_MASKING_ENABLE (1 << 18) + /* gap */ -#define R300_RB3D_DEPTHOFFSET 0x4F20 -#define R300_RB3D_DEPTHPITCH 0x4F24 -# define R300_DEPTHPITCH_MASK 0x00001FF8 /* GUESS */ -# define R300_DEPTH_TILE_ENABLE (1 << 16) /* GUESS */ -# define R300_DEPTH_MICROTILE_ENABLE (1 << 17) /* GUESS */ -# define R300_DEPTH_ENDIAN_NO_SWAP (0 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_WORD_SWAP (1 << 18) /* GUESS */ -# define R300_DEPTH_ENDIAN_DWORD_SWAP (2 << 18) /* GUESS */ +/* Z Buffer Address Offset. + * Bits 31 to 5 are used for aligned Z buffer address offset for macro tiles. + */ +#define R300_ZB_DEPTHOFFSET 0x4f20 + +/* Z Buffer Pitch and Endian Control */ +#define R300_ZB_DEPTHPITCH 0x4f24 +# define R300_DEPTHPITCH_MASK 0x00003FFC +# define R300_DEPTHMACROTILE_DISABLE (0 << 16) +# define R300_DEPTHMACROTILE_ENABLE (1 << 16) +# define R300_DEPTHMICROTILE_LINEAR (0 << 17) +# define R300_DEPTHMICROTILE_TILED (1 << 17) +# define R300_DEPTHMICROTILE_TILED_SQUARE (2 << 17) +# define R300_DEPTHENDIAN_NO_SWAP (0 << 18) +# define R300_DEPTHENDIAN_WORD_SWAP (1 << 18) +# define R300_DEPTHENDIAN_DWORD_SWAP (2 << 18) +# define R300_DEPTHENDIAN_HALF_DWORD_SWAP (3 << 18) + +/* Z Buffer Clear Value */ +#define R300_ZB_DEPTHCLEARVALUE 0x4f28 + +#define R300_ZB_ZMASK_OFFSET 0x4f30 +#define R300_ZB_ZMASK_PITCH 0x4f34 +#define R300_ZB_ZMASK_WRINDEX 0x4f38 +#define R300_ZB_ZMASK_DWORD 0x4f3c +#define R300_ZB_ZMASK_RDINDEX 0x4f40 + +/* Hierarchical Z Memory Offset */ +#define R300_ZB_HIZ_OFFSET 0x4f44 + +/* Hierarchical Z Write Index */ +#define R300_ZB_HIZ_WRINDEX 0x4f48 + +/* Hierarchical Z Data */ +#define R300_ZB_HIZ_DWORD 0x4f4c + +/* Hierarchical Z Read Index */ +#define R300_ZB_HIZ_RDINDEX 0x4f50 + +/* Hierarchical Z Pitch */ +#define R300_ZB_HIZ_PITCH 0x4f54 + +/* Z Buffer Z Pass Counter Data */ +#define R300_ZB_ZPASS_DATA 0x4f58 + +/* Z Buffer Z Pass Counter Address */ +#define R300_ZB_ZPASS_ADDR 0x4f5c + +/* Depth buffer X and Y coordinate offset */ +#define R300_ZB_DEPTHXY_OFFSET 0x4f60 +# define R300_DEPTHX_OFFSET_SHIFT 1 +# define R300_DEPTHX_OFFSET_MASK 0x000007FE +# define R300_DEPTHY_OFFSET_SHIFT 17 +# define R300_DEPTHY_OFFSET_MASK 0x07FE0000 + +/* Sets the fifo sizes */ +#define R500_ZB_FIFO_SIZE 0x4fd0 +# define R500_OP_FIFO_SIZE_FULL (0 << 0) +# define R500_OP_FIFO_SIZE_HALF (1 << 0) +# define R500_OP_FIFO_SIZE_QUATER (2 << 0) +# define R500_OP_FIFO_SIZE_EIGTHS (4 << 0) + +/* Stencil Reference Value and Mask for backfacing quads */ +/* R300_ZB_STENCILREFMASK handles front face */ +#define R500_ZB_STENCILREFMASK_BF 0x4fd4 +# define R500_STENCILREF_SHIFT 0 +# define R500_STENCILREF_MASK 0x000000ff +# define R500_STENCILMASK_SHIFT 8 +# define R500_STENCILMASK_MASK 0x0000ff00 +# define R500_STENCILWRITEMASK_SHIFT 16 +# define R500_STENCILWRITEMASK_MASK 0x00ff0000 /* BEGIN: Vertex program instruction set */ -- cgit v0.10.2 From 598d14482380312939a3e3a4ae0657eb6b50a532 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 19 Jun 2008 14:00:37 +1000 Subject: [AGP] intel_agp: extra stolen mem size available for IGD_GM chipset This adds missing stolen memory size detect for IGD_GM, be sure to detect right size as current X intel driver (2.3.2) which has already worked out. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 0235659..e73f8f0 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -567,13 +567,13 @@ static void intel_i830_init_gtt_entries(void) gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_128M: - if (IS_G33) + if (IS_G33 || IS_I965) gtt_entries = MB(128) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_256M: - if (IS_G33) + if (IS_G33 || IS_I965) gtt_entries = MB(256) - KB(size); else gtt_entries = 0; -- cgit v0.10.2 From 25ce77abf8be3a96b3673e46722a9bd05f149584 Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Thu, 19 Jun 2008 14:17:58 +1000 Subject: [AGP] intel_agp: Add support for Intel 4 series chipsets Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index e73f8f0..b52988d 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -34,6 +34,12 @@ #define PCI_DEVICE_ID_INTEL_Q33_IG 0x29D2 #define PCI_DEVICE_ID_INTEL_IGD_HB 0x2A40 #define PCI_DEVICE_ID_INTEL_IGD_IG 0x2A42 +#define PCI_DEVICE_ID_INTEL_IGD_E_HB 0x2E00 +#define PCI_DEVICE_ID_INTEL_IGD_E_IG 0x2E02 +#define PCI_DEVICE_ID_INTEL_Q45_HB 0x2E10 +#define PCI_DEVICE_ID_INTEL_Q45_IG 0x2E12 +#define PCI_DEVICE_ID_INTEL_G45_HB 0x2E20 +#define PCI_DEVICE_ID_INTEL_G45_IG 0x2E22 /* cover 915 and 945 variants */ #define IS_I915 (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_E7221_HB || \ @@ -55,6 +61,10 @@ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q35_HB || \ agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q33_HB) +#define IS_G4X (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_E_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_Q45_HB || \ + agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_G45_HB) + extern int agp_memory_reserved; @@ -80,8 +90,13 @@ extern int agp_memory_reserved; #define I915_PTEADDR 0x1C #define I915_GMCH_GMS_STOLEN_48M (0x6 << 4) #define I915_GMCH_GMS_STOLEN_64M (0x7 << 4) -#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) -#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define G33_GMCH_GMS_STOLEN_128M (0x8 << 4) +#define G33_GMCH_GMS_STOLEN_256M (0x9 << 4) +#define INTEL_GMCH_GMS_STOLEN_96M (0xa << 4) +#define INTEL_GMCH_GMS_STOLEN_160M (0xb << 4) +#define INTEL_GMCH_GMS_STOLEN_224M (0xc << 4) +#define INTEL_GMCH_GMS_STOLEN_352M (0xd << 4) + #define I915_IFPADDR 0x60 /* Intel 965G registers */ @@ -506,6 +521,10 @@ static void intel_i830_init_gtt_entries(void) size = 512; } size += 4; + } else if (IS_G4X) { + /* On 4 series hardware, GTT stolen is separate from graphics + * stolen, ignore it in stolen gtt entries counting */ + size = 0; } else { /* On previous hardware, the GTT size was just what was * required to map the aperture. @@ -554,30 +573,54 @@ static void intel_i830_init_gtt_entries(void) break; case I915_GMCH_GMS_STOLEN_48M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(48) - KB(size); else gtt_entries = 0; break; case I915_GMCH_GMS_STOLEN_64M: /* Check it's really I915G */ - if (IS_I915 || IS_I965 || IS_G33) + if (IS_I915 || IS_I965 || IS_G33 || IS_G4X) gtt_entries = MB(64) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_128M: - if (IS_G33 || IS_I965) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(128) - KB(size); else gtt_entries = 0; break; case G33_GMCH_GMS_STOLEN_256M: - if (IS_G33 || IS_I965) + if (IS_G33 || IS_I965 || IS_G4X) gtt_entries = MB(256) - KB(size); else gtt_entries = 0; break; + case INTEL_GMCH_GMS_STOLEN_96M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(96) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_160M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(160) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_224M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(224) - KB(size); + else + gtt_entries = 0; + break; + case INTEL_GMCH_GMS_STOLEN_352M: + if (IS_I965 || IS_G4X) + gtt_entries = MB(352) - KB(size); + else + gtt_entries = 0; + break; default: gtt_entries = 0; break; @@ -1136,6 +1179,20 @@ static unsigned long intel_i965_mask_memory(struct agp_bridge_data *bridge, return addr | bridge->driver->masks[type].mask; } +static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) +{ + switch (agp_bridge->dev->device) { + case PCI_DEVICE_ID_INTEL_IGD_HB: + case PCI_DEVICE_ID_INTEL_IGD_E_HB: + case PCI_DEVICE_ID_INTEL_Q45_HB: + case PCI_DEVICE_ID_INTEL_G45_HB: + *gtt_offset = *gtt_size = MB(2); + break; + default: + *gtt_offset = *gtt_size = KB(512); + } +} + /* The intel i965 automatically initializes the agp aperture during POST. * Use the memory already set aside for in the GTT. */ @@ -1156,10 +1213,7 @@ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) temp &= 0xfff00000; - if (agp_bridge->dev->device == PCI_DEVICE_ID_INTEL_IGD_HB) - gtt_offset = gtt_size = MB(2); - else - gtt_offset = gtt_size = KB(512); + intel_i965_get_gtt_range(>t_offset, >t_size); intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); @@ -2065,6 +2119,12 @@ static const struct intel_driver_description { NULL, &intel_g33_driver }, { PCI_DEVICE_ID_INTEL_IGD_HB, PCI_DEVICE_ID_INTEL_IGD_IG, 0, "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_IGD_E_HB, PCI_DEVICE_ID_INTEL_IGD_E_IG, 0, + "Intel Integrated Graphics Device", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_Q45_HB, PCI_DEVICE_ID_INTEL_Q45_IG, 0, + "Q45/Q43", NULL, &intel_i965_driver }, + { PCI_DEVICE_ID_INTEL_G45_HB, PCI_DEVICE_ID_INTEL_G45_IG, 0, + "G45/G43", NULL, &intel_i965_driver }, { 0, 0, 0, NULL, NULL, NULL } }; @@ -2256,6 +2316,9 @@ static struct pci_device_id agp_intel_pci_table[] = { ID(PCI_DEVICE_ID_INTEL_Q35_HB), ID(PCI_DEVICE_ID_INTEL_Q33_HB), ID(PCI_DEVICE_ID_INTEL_IGD_HB), + ID(PCI_DEVICE_ID_INTEL_IGD_E_HB), + ID(PCI_DEVICE_ID_INTEL_Q45_HB), + ID(PCI_DEVICE_ID_INTEL_G45_HB), { } }; -- cgit v0.10.2 From 62c96b9d0917894c164aa3e474a3ff3bca1554ae Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:27:53 +1000 Subject: agp/intel: cleanup some serious whitespace badness Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index b52988d..30aa01b 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1198,45 +1198,45 @@ static void intel_i965_get_gtt_range(int *gtt_offset, int *gtt_size) */ static int intel_i965_create_gatt_table(struct agp_bridge_data *bridge) { - int page_order; - struct aper_size_info_fixed *size; - int num_entries; - u32 temp; - int gtt_offset, gtt_size; + int page_order; + struct aper_size_info_fixed *size; + int num_entries; + u32 temp; + int gtt_offset, gtt_size; - size = agp_bridge->current_size; - page_order = size->page_order; - num_entries = size->num_entries; - agp_bridge->gatt_table_real = NULL; + size = agp_bridge->current_size; + page_order = size->page_order; + num_entries = size->num_entries; + agp_bridge->gatt_table_real = NULL; - pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); + pci_read_config_dword(intel_private.pcidev, I915_MMADDR, &temp); - temp &= 0xfff00000; + temp &= 0xfff00000; intel_i965_get_gtt_range(>t_offset, >t_size); - intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); + intel_private.gtt = ioremap((temp + gtt_offset) , gtt_size); - if (!intel_private.gtt) - return -ENOMEM; + if (!intel_private.gtt) + return -ENOMEM; - intel_private.registers = ioremap(temp, 128 * 4096); - if (!intel_private.registers) { + intel_private.registers = ioremap(temp, 128 * 4096); + if (!intel_private.registers) { iounmap(intel_private.gtt); return -ENOMEM; } - temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; - global_cache_flush(); /* FIXME: ? */ + temp = readl(intel_private.registers+I810_PGETBL_CTL) & 0xfffff000; + global_cache_flush(); /* FIXME: ? */ - /* we have to call this as early as possible after the MMIO base address is known */ - intel_i830_init_gtt_entries(); + /* we have to call this as early as possible after the MMIO base address is known */ + intel_i830_init_gtt_entries(); - agp_bridge->gatt_table = NULL; + agp_bridge->gatt_table = NULL; - agp_bridge->gatt_bus_addr = temp; + agp_bridge->gatt_bus_addr = temp; - return 0; + return 0; } @@ -1753,7 +1753,7 @@ static const struct agp_bridge_driver intel_815_driver = { .free_by_type = agp_generic_free_by_type, .agp_alloc_page = agp_generic_alloc_page, .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = agp_generic_type_to_mask_type, + .agp_type_to_mask_type = agp_generic_type_to_mask_type, }; static const struct agp_bridge_driver intel_830_driver = { @@ -1954,28 +1954,26 @@ static const struct agp_bridge_driver intel_915_driver = { }; static const struct agp_bridge_driver intel_i965_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = true, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i965_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i965_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; @@ -2004,28 +2002,28 @@ static const struct agp_bridge_driver intel_7505_driver = { }; static const struct agp_bridge_driver intel_g33_driver = { - .owner = THIS_MODULE, - .aperture_sizes = intel_i830_sizes, - .size_type = FIXED_APER_SIZE, - .num_aperture_sizes = 4, - .needs_scratch_page = true, - .configure = intel_i915_configure, - .fetch_size = intel_i9xx_fetch_size, - .cleanup = intel_i915_cleanup, - .tlb_flush = intel_i810_tlbflush, - .mask_memory = intel_i965_mask_memory, - .masks = intel_i810_masks, - .agp_enable = intel_i810_agp_enable, - .cache_flush = global_cache_flush, - .create_gatt_table = intel_i915_create_gatt_table, - .free_gatt_table = intel_i830_free_gatt_table, - .insert_memory = intel_i915_insert_entries, - .remove_memory = intel_i915_remove_entries, - .alloc_by_type = intel_i830_alloc_by_type, - .free_by_type = intel_i810_free_by_type, - .agp_alloc_page = agp_generic_alloc_page, - .agp_destroy_page = agp_generic_destroy_page, - .agp_type_to_mask_type = intel_i830_type_to_mask_type, + .owner = THIS_MODULE, + .aperture_sizes = intel_i830_sizes, + .size_type = FIXED_APER_SIZE, + .num_aperture_sizes = 4, + .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, + .cleanup = intel_i915_cleanup, + .tlb_flush = intel_i810_tlbflush, + .mask_memory = intel_i965_mask_memory, + .masks = intel_i810_masks, + .agp_enable = intel_i810_agp_enable, + .cache_flush = global_cache_flush, + .create_gatt_table = intel_i915_create_gatt_table, + .free_gatt_table = intel_i830_free_gatt_table, + .insert_memory = intel_i915_insert_entries, + .remove_memory = intel_i915_remove_entries, + .alloc_by_type = intel_i830_alloc_by_type, + .free_by_type = intel_i810_free_by_type, + .agp_alloc_page = agp_generic_alloc_page, + .agp_destroy_page = agp_generic_destroy_page, + .agp_type_to_mask_type = intel_i830_type_to_mask_type, .chipset_flush = intel_i915_chipset_flush, }; -- cgit v0.10.2 From 0e480e5fc03c411d350478b2e8dc0906a37b6f07 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:57:31 +1000 Subject: agp: brown paper bag patch - put back the two lines it took out. no more whitespace diffs for me. Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30aa01b..1ae64bb 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1959,6 +1959,8 @@ static const struct agp_bridge_driver intel_i965_driver = { .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, .mask_memory = intel_i965_mask_memory, -- cgit v0.10.2 From 9bedbcb207ed9a571b239231d99c8fd4a34ae24d Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 19 Jun 2008 14:57:31 +1000 Subject: agp: brown paper bag patch - put back two lines that got lost Commit 62c96b9d0917894c164aa3e474a3ff3bca1554ae ("agp/intel: cleanup some serious whitespace badness") didn't just fix whitespace. It also lost two lines. Noticed by Linus. No more whitespace diffs for me. Signed-off-by: Dave Airlie Signed-off-by: Linus Torvalds diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 30aa01b..1ae64bb 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -1959,6 +1959,8 @@ static const struct agp_bridge_driver intel_i965_driver = { .size_type = FIXED_APER_SIZE, .num_aperture_sizes = 4, .needs_scratch_page = true, + .configure = intel_i915_configure, + .fetch_size = intel_i9xx_fetch_size, .cleanup = intel_i915_cleanup, .tlb_flush = intel_i810_tlbflush, .mask_memory = intel_i965_mask_memory, -- cgit v0.10.2 From 49307fd6f72bdd68cc2bd23e7da0bcfecf8087c9 Mon Sep 17 00:00:00 2001 From: Dario Faggioli Date: Wed, 18 Jun 2008 09:18:38 +0200 Subject: sched: NULL pointer dereference while setting sched_rt_period_us MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit When CONFIG_RT_GROUP_SCHED and CONFIG_CGROUP_SCHED are enabled, with: echo 10000 > /proc/sys/kernel/sched_rt_period_us We get this: BUG: unable to handle kernel NULL pointer dereference at 0000008c [ 947.682233] IP: [] __rt_schedulable+0x12/0x160 [ 947.683123] *pde = 00000000=20 [ 947.683782] Oops: 0000 [#1] [ 947.684307] Modules linked in: [ 947.684308] [ 947.684308] Pid: 2359, comm: bash Not tainted (2.6.26-rc6 #8) [ 947.684308] EIP: 0060:[] EFLAGS: 00000246 CPU: 0 [ 947.684308] EIP is at __rt_schedulable+0x12/0x160 [ 947.684308] EAX: 00000000 EBX: 00000000 ECX: 00000000 EDX: 00000001 [ 947.684308] ESI: c0521db4 EDI: 00000001 EBP: c6cc9f00 ESP: c6cc9ed0 [ 947.684308] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 947.684308] Process bash (pid: 2359, tiÆcc8000 taskÇa54f00=20 task.tiÆcc8000) [ 947.684308] Stack: c0222790 00000000 080f8c08 c0521db4 c6cc9f00 00000001 00000000 00000000 [ 947.684308] c6cc9f9c 00000000 c0521db4 00000001 c6cc9f28 c0216d40 00000000 00000000 [ 947.684308] c6cc9f9c 000f4240 000e7ef0 ffffffff c0521db4 c79dfb60 c6cc9f58 c02af2cc [ 947.684308] Call Trace: [ 947.684308] [] ? do_proc_dointvec_conv+0x0/0x50 [ 947.684308] [] ? sched_rt_handler+0x80/0x110 [ 947.684308] [] ? proc_sys_call_handler+0x9c/0xb0 [ 947.684308] [] ? proc_sys_write+0x1a/0x20 [ 947.684308] [] ? vfs_write+0x96/0x160 [ 947.684308] [] ? proc_sys_write+0x0/0x20 [ 947.684308] [] ? sys_write+0x3d/0x70 [ 947.684308] [] ? sysenter_past_esp+0x6a/0x91 [ 947.684308] ======================= [ 947.684308] Code: 24 04 e8 62 b1 0e 00 89 c7 89 f8 8b 5d f4 8b 75 f8 8b 7d fc 89 ec 5d c3 90 55 89 e5 57 56 53 83 ec 24 89 45 ec 89 55 e4 89 4d e8 <8b> b8 8c 00 00 00 85 ff 0f 84 c9 00 00 00 8b 57 24 39 55 e8 8b [ 947.684308] EIP: [] __rt_schedulable+0x12/0x160 SS:ESP 0068:c6cc9ed0 We think the following patch solves the issue. Signed-off-by: Dario Faggioli Signed-off-by: Michael Trimarchi Signed-off-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 0422852..320e9a4 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8350,7 +8350,7 @@ static unsigned long to_ratio(u64 period, u64 runtime) #ifdef CONFIG_CGROUP_SCHED static int __rt_schedulable(struct task_group *tg, u64 period, u64 runtime) { - struct task_group *tgi, *parent = tg->parent; + struct task_group *tgi, *parent = tg ? tg->parent : NULL; unsigned long total = 0; if (!parent) { -- cgit v0.10.2 From 7ea56616ba6b3d67a4892728182e38ae162ea3e7 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:56 +0200 Subject: sched: rt-group: fix hierarchy Don't re-set the entity's runqueue to the wrong rq after we've set it to the right one. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 320e9a4..ce375cb 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7628,7 +7628,6 @@ static void init_tg_rt_entry(struct task_group *tg, struct rt_rq *rt_rq, else rt_se->rt_rq = parent->my_q; - rt_se->rt_rq = &rq->rt; rt_se->my_q = rt_rq; rt_se->parent = parent; INIT_LIST_HEAD(&rt_se->run_list); -- cgit v0.10.2 From ad2a3f13b7258a5daaaeb8cff9f835aac468b71d Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:57 +0200 Subject: sched: rt-group: heirarchy aware throttle The bandwidth throttle code dequeues a group when it runs out of quota, and re-queues it once the period rolls over and the quota gets refreshed. Sadly it failed to take the hierarchy into consideration. Share more of the enqueue/dequeue code with regular task opterations. Also, some operations like sched_setscheduler() can dequeue/enqueue tasks that are in throttled runqueues, we should not inadvertly re-enqueue empty runqueues so check for that. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 3432d57..8372415 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -449,13 +449,19 @@ void dec_rt_tasks(struct sched_rt_entity *rt_se, struct rt_rq *rt_rq) #endif } -static void enqueue_rt_entity(struct sched_rt_entity *rt_se) +static void __enqueue_rt_entity(struct sched_rt_entity *rt_se) { struct rt_rq *rt_rq = rt_rq_of_se(rt_se); struct rt_prio_array *array = &rt_rq->active; struct rt_rq *group_rq = group_rt_rq(rt_se); - if (group_rq && rt_rq_throttled(group_rq)) + /* + * Don't enqueue the group if its throttled, or when empty. + * The latter is a consequence of the former when a child group + * get throttled and the current group doesn't have any other + * active members. + */ + if (group_rq && (rt_rq_throttled(group_rq) || !group_rq->rt_nr_running)) return; list_add_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se)); @@ -464,7 +470,7 @@ static void enqueue_rt_entity(struct sched_rt_entity *rt_se) inc_rt_tasks(rt_se, rt_rq); } -static void dequeue_rt_entity(struct sched_rt_entity *rt_se) +static void __dequeue_rt_entity(struct sched_rt_entity *rt_se) { struct rt_rq *rt_rq = rt_rq_of_se(rt_se); struct rt_prio_array *array = &rt_rq->active; @@ -480,11 +486,10 @@ static void dequeue_rt_entity(struct sched_rt_entity *rt_se) * Because the prio of an upper entry depends on the lower * entries, we must remove entries top - down. */ -static void dequeue_rt_stack(struct task_struct *p) +static void dequeue_rt_stack(struct sched_rt_entity *rt_se) { - struct sched_rt_entity *rt_se, *back = NULL; + struct sched_rt_entity *back = NULL; - rt_se = &p->rt; for_each_sched_rt_entity(rt_se) { rt_se->back = back; back = rt_se; @@ -492,7 +497,26 @@ static void dequeue_rt_stack(struct task_struct *p) for (rt_se = back; rt_se; rt_se = rt_se->back) { if (on_rt_rq(rt_se)) - dequeue_rt_entity(rt_se); + __dequeue_rt_entity(rt_se); + } +} + +static void enqueue_rt_entity(struct sched_rt_entity *rt_se) +{ + dequeue_rt_stack(rt_se); + for_each_sched_rt_entity(rt_se) + __enqueue_rt_entity(rt_se); +} + +static void dequeue_rt_entity(struct sched_rt_entity *rt_se) +{ + dequeue_rt_stack(rt_se); + + for_each_sched_rt_entity(rt_se) { + struct rt_rq *rt_rq = group_rt_rq(rt_se); + + if (rt_rq && rt_rq->rt_nr_running) + __enqueue_rt_entity(rt_se); } } @@ -506,32 +530,15 @@ static void enqueue_task_rt(struct rq *rq, struct task_struct *p, int wakeup) if (wakeup) rt_se->timeout = 0; - dequeue_rt_stack(p); - - /* - * enqueue everybody, bottom - up. - */ - for_each_sched_rt_entity(rt_se) - enqueue_rt_entity(rt_se); + enqueue_rt_entity(rt_se); } static void dequeue_task_rt(struct rq *rq, struct task_struct *p, int sleep) { struct sched_rt_entity *rt_se = &p->rt; - struct rt_rq *rt_rq; update_curr_rt(rq); - - dequeue_rt_stack(p); - - /* - * re-enqueue all non-empty rt_rq entities. - */ - for_each_sched_rt_entity(rt_se) { - rt_rq = group_rt_rq(rt_se); - if (rt_rq && rt_rq->rt_nr_running) - enqueue_rt_entity(rt_se); - } + dequeue_rt_entity(rt_se); } /* -- cgit v0.10.2 From 15a8641eadb492ef7c5489faa25256967bdfd303 Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 09:06:59 +0200 Subject: sched: rt-group: fix RR buglet In tick_task_rt() we first call update_curr_rt() which can dequeue a runqueue due to it running out of runtime, and then we try to requeue it, of it also having exhausted its RR quota. Obviously requeueing something that is no longer on the runqueue will not have the expected result. Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 8372415..1dad5bb 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -549,8 +549,10 @@ static void requeue_rt_entity(struct rt_rq *rt_rq, struct sched_rt_entity *rt_se) { struct rt_prio_array *array = &rt_rq->active; + struct list_head *queue = array->queue + rt_se_prio(rt_se); - list_move_tail(&rt_se->run_list, array->queue + rt_se_prio(rt_se)); + if (on_rt_rq(rt_se)) + list_move_tail(&rt_se->run_list, queue); } static void requeue_task_rt(struct rq *rq, struct task_struct *p) -- cgit v0.10.2 From f18f982abf183e91f435990d337164c7a43d1e6d Mon Sep 17 00:00:00 2001 From: Max Krasnyansky Date: Thu, 29 May 2008 11:17:01 -0700 Subject: sched: CPU hotplug events must not destroy scheduler domains created by the cpusets First issue is not related to the cpusets. We're simply leaking doms_cur. It's allocated in arch_init_sched_domains() which is called for every hotplug event. So we just keep reallocation doms_cur without freeing it. I introduced free_sched_domains() function that cleans things up. Second issue is that sched domains created by the cpusets are completely destroyed by the CPU hotplug events. For all CPU hotplug events scheduler attaches all CPUs to the NULL domain and then puts them all into the single domain thereby destroying domains created by the cpusets (partition_sched_domains). The solution is simple, when cpusets are enabled scheduler should not create default domain and instead let cpusets do that. Which is exactly what the patch does. Signed-off-by: Max Krasnyansky Cc: pj@sgi.com Cc: menage@google.com Cc: rostedt@goodmis.org Acked-by: Peter Zijlstra Signed-off-by: Thomas Gleixner diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 039baa4..bceb895 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1890,6 +1890,12 @@ static void common_cpu_mem_hotplug_unplug(void) top_cpuset.mems_allowed = node_states[N_HIGH_MEMORY]; scan_for_empty_cpusets(&top_cpuset); + /* + * Scheduler destroys domains on hotplug events. + * Rebuild them based on the current settings. + */ + rebuild_sched_domains(); + cgroup_unlock(); } diff --git a/kernel/sched.c b/kernel/sched.c index ce375cb..4a3cb06 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -7238,6 +7238,18 @@ void __attribute__((weak)) arch_update_cpu_topology(void) } /* + * Free current domain masks. + * Called after all cpus are attached to NULL domain. + */ +static void free_sched_domains(void) +{ + ndoms_cur = 0; + if (doms_cur != &fallback_doms) + kfree(doms_cur); + doms_cur = &fallback_doms; +} + +/* * Set up scheduler domains and groups. Callers must hold the hotplug lock. * For now this just excludes isolated cpus, but could be used to * exclude other special cases in the future. @@ -7384,6 +7396,7 @@ int arch_reinit_sched_domains(void) get_online_cpus(); mutex_lock(&sched_domains_mutex); detach_destroy_domains(&cpu_online_map); + free_sched_domains(); err = arch_init_sched_domains(&cpu_online_map); mutex_unlock(&sched_domains_mutex); put_online_cpus(); @@ -7469,6 +7482,7 @@ static int update_sched_domains(struct notifier_block *nfb, case CPU_DOWN_PREPARE: case CPU_DOWN_PREPARE_FROZEN: detach_destroy_domains(&cpu_online_map); + free_sched_domains(); return NOTIFY_OK; case CPU_UP_CANCELED: @@ -7487,8 +7501,16 @@ static int update_sched_domains(struct notifier_block *nfb, return NOTIFY_DONE; } +#ifndef CONFIG_CPUSETS + /* + * Create default domain partitioning if cpusets are disabled. + * Otherwise we let cpusets rebuild the domains based on the + * current setup. + */ + /* The hotplug lock is already held by cpu_up/cpu_down */ arch_init_sched_domains(&cpu_online_map); +#endif return NOTIFY_OK; } -- cgit v0.10.2 From 30e0e178193d4221abc9926b07a4c7661c7cc4a9 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Tue, 13 May 2008 10:27:17 +0800 Subject: cpuset: limit the input of cpuset.sched_relax_domain_level We allow the inputs to be [-1 ... SD_LV_MAX), and return -EINVAL for inputs outside this range. Signed-off-by: Li Zefan Acked-by: Paul Menage Acked-by: Paul Jackson Acked-by: Hidetoshi Seto Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index d803c5c..353504d 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -542,7 +542,7 @@ otherwise initial value -1 that indicates the cpuset has no request. 2 : search cores in a package. 3 : search cpus in a node [= system wide on non-NUMA system] ( 4 : search nodes in a chunk of node [on NUMA system] ) - ( 5~ : search system wide [on NUMA system]) + ( 5 : search system wide [on NUMA system] ) This file is per-cpuset and affect the sched domain where the cpuset belongs to. Therefore if the flag 'sched_load_balance' of a cpuset diff --git a/kernel/cpuset.c b/kernel/cpuset.c index 039baa4..66103a1 100644 --- a/kernel/cpuset.c +++ b/kernel/cpuset.c @@ -1037,8 +1037,8 @@ int current_cpuset_is_being_rebound(void) static int update_relax_domain_level(struct cpuset *cs, s64 val) { - if ((int)val < 0) - val = -1; + if (val < -1 || val >= SD_LV_MAX) + return -EINVAL; if (val != cs->relax_domain_level) { cs->relax_domain_level = val; diff --git a/kernel/sched.c b/kernel/sched.c index eaf6751..bb2c699 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -6877,7 +6877,12 @@ static int default_relax_domain_level = -1; static int __init setup_relax_domain_level(char *str) { - default_relax_domain_level = simple_strtoul(str, NULL, 0); + unsigned long val; + + val = simple_strtoul(str, NULL, 0); + if (val < SD_LV_MAX) + default_relax_domain_level = val; + return 1; } __setup("relax_domain_level=", setup_relax_domain_level); -- cgit v0.10.2 From afd38009cc3acd36d41f349a669ad5825d695b1f Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 22 May 2008 14:18:17 -0400 Subject: rcupreempt: remove export of rcu_batches_completed_bh In rcupreempt, rcu_batches_completed_bh is defined as a static inline in the header file. This does not need to be exported, and not only that, this breaks my PPC build. Signed-off-by: Steven Rostedt Cc: "Paul E. McKenney" Cc: paulus@samba.org Cc: linuxppc-dev@ozlabs.org Signed-off-by: Thomas Gleixner diff --git a/kernel/rcupreempt.c b/kernel/rcupreempt.c index e1cdf19..5e02b77 100644 --- a/kernel/rcupreempt.c +++ b/kernel/rcupreempt.c @@ -217,8 +217,6 @@ long rcu_batches_completed(void) } EXPORT_SYMBOL_GPL(rcu_batches_completed); -EXPORT_SYMBOL_GPL(rcu_batches_completed_bh); - void __rcu_read_lock(void) { int idx; -- cgit v0.10.2 From 9c106c119ebedf624fbd682fd2a4d52e3c8c1a67 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 27 May 2008 12:23:29 -0500 Subject: softlockup: fix NMI hangs due to lock race - 2.6.26-rc regression The touch_nmi_watchdog() routine on x86 ultimately calls touch_softlockup_watchdog(). The problem is that to touch the softlockup watchdog, the cpu_clock code has to be called which could involve multiple cpu locks and can lead to a hard hang if one of the locks is held by a processor that is not going to return anytime soon (such as could be the case with kgdb or perhaps even with some other kind of exception). This patch causes the public version of the touch_softlockup_watchdog() to defer the cpu clock access to a later point. The test case for this problem is to use the following kernel config options: CONFIG_KGDB_TESTS=y CONFIG_KGDB_TESTS_ON_BOOT=y CONFIG_KGDB_TESTS_BOOT_STRING="V1F100I100000" It should be noted that kgdb test suite and these options were not available until 2.6.26-rc2, so it was necessary to patch the kgdb test suite during the bisection. I would consider this patch a regression fix because the problem first appeared in commit 27ec4407790d075c325e1f4da0a19c56953cce23 when some logic was added to try to periodically sync the clocks. It was possible to work around this particular problem by simply not performing the sync anytime the system was in a critical context. This was ok until commit 3e51f33fcc7f55e6df25d15b55ed10c8b4da84cd, which added config option CONFIG_HAVE_UNSTABLE_SCHED_CLOCK and some multi-cpu locks to sync the clocks. It became clear that accessing this code from an nmi was the source of the lockups. Avoiding the access to the low level clock code from an code inside the NMI processing also fixed the problem with the 27ec44... commit. Signed-off-by: Jason Wessel Signed-off-by: Ingo Molnar diff --git a/kernel/softlockup.c b/kernel/softlockup.c index 01b6522..c828c23 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -49,12 +49,17 @@ static unsigned long get_timestamp(int this_cpu) return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */ } -void touch_softlockup_watchdog(void) +static void __touch_softlockup_watchdog(void) { int this_cpu = raw_smp_processor_id(); __raw_get_cpu_var(touch_timestamp) = get_timestamp(this_cpu); } + +void touch_softlockup_watchdog(void) +{ + __raw_get_cpu_var(touch_timestamp) = 0; +} EXPORT_SYMBOL(touch_softlockup_watchdog); void touch_all_softlockup_watchdogs(void) @@ -80,7 +85,7 @@ void softlockup_tick(void) unsigned long now; if (touch_timestamp == 0) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); return; } @@ -95,7 +100,7 @@ void softlockup_tick(void) /* do not print during early bootup: */ if (unlikely(system_state != SYSTEM_RUNNING)) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); return; } @@ -214,7 +219,7 @@ static int watchdog(void *__bind_cpu) sched_setscheduler(current, SCHED_FIFO, ¶m); /* initialize timestamp */ - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); set_current_state(TASK_INTERRUPTIBLE); /* @@ -223,7 +228,7 @@ static int watchdog(void *__bind_cpu) * debug-printout triggers in softlockup_tick(). */ while (!kthread_should_stop()) { - touch_softlockup_watchdog(); + __touch_softlockup_watchdog(); schedule(); if (kthread_should_stop()) -- cgit v0.10.2 From ad524d46f36bbc32033bb72ba42958f12bf49b06 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 6 Jun 2008 10:21:39 +0100 Subject: x86: set PAE PHYSICAL_MASK_SHIFT to 44 bits. When a 64-bit x86 processor runs in 32-bit PAE mode, a pte can potentially have the same number of physical address bits as the 64-bit host ("Enhanced Legacy PAE Paging"). This means, in theory, we could have up to 52 bits of physical address in a pte. The 32-bit kernel uses a 32-bit unsigned long to represent a pfn. This means that it can only represent physical addresses up to 32+12=44 bits wide. Rather than widening pfns everywhere, just set 2^44 as the Linux x86_32-PAE architectural limit for physical address size. This is a bugfix for two cases: 1. running a 32-bit PAE kernel on a machine with more than 64GB RAM. 2. running a 32-bit PAE Xen guest on a host machine with more than 64GB RAM In both cases, a pte could need to have more than 36 bits of physical, and masking it to 36-bits will cause fairly severe havoc. Signed-off-by: Jeremy Fitzhardinge Cc: Jan Beulich Cc: Signed-off-by: Ingo Molnar diff --git a/include/asm-x86/page_32.h b/include/asm-x86/page_32.h index 424e82f..ccf0ba3 100644 --- a/include/asm-x86/page_32.h +++ b/include/asm-x86/page_32.h @@ -14,7 +14,8 @@ #define __PAGE_OFFSET _AC(CONFIG_PAGE_OFFSET, UL) #ifdef CONFIG_X86_PAE -#define __PHYSICAL_MASK_SHIFT 36 +/* 44=32+12, the limit we can fit into an unsigned long pfn */ +#define __PHYSICAL_MASK_SHIFT 44 #define __VIRTUAL_MASK_SHIFT 32 #define PAGETABLE_LEVELS 3 -- cgit v0.10.2 From 75118a82e21cafb4a82b53bb85d1c7689787e046 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Fri, 13 Jun 2008 15:47:12 -0700 Subject: x86: fix NULL pointer deref in __switch_to Patrick McHardy reported a crash: > > I get this oops once a day, its apparently triggered by something > > run by cron, but the process is a different one each time. > > > > Kernel is -git from yesterday shortly before the -rc6 release > > (last commit is the usb-2.6 merge, the x86 patches are missing), > > .config is attached. > > > > I'll retry with current -git, but the patches that have gone in > > since I last updated don't look related. > > > > [62060.043009] BUG: unable to handle kernel NULL pointer dereference at > > 000001ff > > [62060.043009] IP: [] __switch_to+0x2f/0x118 > > [62060.043009] *pde = 00000000 > > [62060.043009] Oops: 0002 [#1] PREEMPT Vegard Nossum analyzed it: > This decodes to > > 0: 0f ae 00 fxsave (%eax) > > so it's related to the floating-point context. This is the exact > location of the crash: > > $ addr2line -e arch/x86/kernel/process_32.o -i ab0 > include/asm/i387.h:232 > include/asm/i387.h:262 > arch/x86/kernel/process_32.c:595 > > ...so it looks like prev_task->thread.xstate->fxsave has become NULL. > Or maybe it never had any other value. Somehow (as described below) TS_USEDFPU is set but the fpu is not allocated or freed. Another possible FPU pre-emption issue with the sleazy FPU optimization which was benign before but not so anymore, with the dynamic FPU allocation patch. New task is getting exec'd and it is prempted at the below point. flush_thread() { ... /* * Forget coprocessor state.. */ clear_fpu(tsk); <----- Preemption point clear_used_math(); ... } Now when it context switches in again, as the used_math() is still set and fpu_counter can be > 5, we will do a math_state_restore() which sets the task's TS_USEDFPU. After it continues from the above preemption point it does clear_used_math() and much later free_thread_xstate(). Now, at the next context switch, it is quite possible that xstate is null, used_math() is not set and TS_USEDFPU is still set. This will trigger unlazy_fpu() causing kernel oops. Fix this by clearing tsk's fpu_counter before clearing task's fpu. Reported-by: Patrick McHardy Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 6d54833..e2db9ac 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -333,6 +333,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index ac54ff5..c6eb5c9 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -294,6 +294,7 @@ void flush_thread(void) /* * Forget coprocessor state.. */ + tsk->fpu_counter = 0; clear_fpu(tsk); clear_used_math(); } -- cgit v0.10.2 From df17b1d990fc214f033c5588e58216ec941591e0 Mon Sep 17 00:00:00 2001 From: Mikael Pettersson Date: Sun, 15 Jun 2008 02:19:56 +0200 Subject: x86, 32-bit: fix boot failure on TSC-less processors Booting 2.6.26-rc6 on my 486 DX/4 fails with a "BUG: Int 6" (invalid opcode) and a kernel halt immediately after the kernel has been uncompressed. The BUG shows EIP pointing to an rdtsc instruction in native_read_tsc(), invoked from native_sched_clock(). (This error occurs so early that not even the serial console can capture it.) A bisection showed that this bug first occurs in 2.6.26-rc3-git7, via commit 9ccc906c97e34fd91dc6aaf5b69b52d824386910: >x86: distangle user disabled TSC from unstable > >tsc_enabled is set to 0 from the command line switch "notsc" and from >the mark_tsc_unstable code. Seperate those functionalities and replace >tsc_enable with tsc_disable. This makes also the native_sched_clock() >decision when to use TSC understandable. > >Preparatory patch to solve the sched_clock() issue on 32 bit. > >Signed-off-by: Thomas Gleixner The core reason for this bug is that native_sched_clock() gets called before tsc_init(). Before the commit above, tsc_32.c used a "tsc_enabled" variable which defaulted to 0 == disabled, and which only got enabled late in tsc_init(). Thus early calls to native_sched_clock() would skip the TSC and use jiffies instead. After the commit above, tsc_32.c uses a "tsc_disabled" variable which defaults to 0, meaning that the TSC is Ok to use. Early calls to native_sched_clock() now erroneously try to use the TSC on !cpu_has_tsc processors, leading to invalid opcode exceptions. My proposed fix is to initialise tsc_disabled to a "soft disabled" state distinct from the hard disabled state set up by the "notsc" kernel option. This fixes the native_sched_clock() problem. It also allows tsc_init() to be simplified: instead of setting tsc_disabled = 1 on every error return, we just set tsc_disabled = 0 once when all checks have succeeded. I've verified that this lets my 486 boot again. I've also verified that a Core2 machine still uses the TSC as clocksource after the patch. Signed-off-by: Mikael Pettersson Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/tsc_32.c b/arch/x86/kernel/tsc_32.c index 068759d..65b7063 100644 --- a/arch/x86/kernel/tsc_32.c +++ b/arch/x86/kernel/tsc_32.c @@ -14,7 +14,10 @@ #include "mach_timer.h" -static int tsc_disabled; +/* native_sched_clock() is called before tsc_init(), so + we must start with the TSC soft disabled to prevent + erroneous rdtsc usage on !cpu_has_tsc processors */ +static int tsc_disabled = -1; /* * On some systems the TSC frequency does not @@ -402,25 +405,20 @@ void __init tsc_init(void) { int cpu; - if (!cpu_has_tsc || tsc_disabled) { - /* Disable the TSC in case of !cpu_has_tsc */ - tsc_disabled = 1; + if (!cpu_has_tsc || tsc_disabled > 0) return; - } cpu_khz = calculate_cpu_khz(); tsc_khz = cpu_khz; if (!cpu_khz) { mark_tsc_unstable("could not calculate TSC khz"); - /* - * We need to disable the TSC completely in this case - * to prevent sched_clock() from using it. - */ - tsc_disabled = 1; return; } + /* now allow native_sched_clock() to use rdtsc */ + tsc_disabled = 0; + printk("Detected %lu.%03lu MHz processor.\n", (unsigned long)cpu_khz / 1000, (unsigned long)cpu_khz % 1000); -- cgit v0.10.2 From d3942cff620bea073fc4e3c8ed878eb1e84615ce Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sun, 8 Jun 2008 16:16:07 +0200 Subject: x86: use BOOTMEM_EXCLUSIVE on 32-bit This patch uses the BOOTMEM_EXCLUSIVE for crashkernel reservation also for i386 and prints a error message on failure. The patch is still for 2.6.26 since it is only bug fixing. The unification of reserve_crashkernel() between i386 and x86_64 should be done for 2.6.27. Signed-off-by: Bernhard Walle Signed-off-by: Ingo Molnar Cc: diff --git a/arch/x86/kernel/setup_32.c b/arch/x86/kernel/setup_32.c index 2c5f8b2..5a2f8e0 100644 --- a/arch/x86/kernel/setup_32.c +++ b/arch/x86/kernel/setup_32.c @@ -532,10 +532,16 @@ static void __init reserve_crashkernel(void) (unsigned long)(crash_size >> 20), (unsigned long)(crash_base >> 20), (unsigned long)(total_mem >> 20)); + + if (reserve_bootmem(crash_base, crash_size, + BOOTMEM_EXCLUSIVE) < 0) { + printk(KERN_INFO "crashkernel reservation " + "failed - memory is in use\n"); + return; + } + crashk_res.start = crash_base; crashk_res.end = crash_base + crash_size - 1; - reserve_bootmem(crash_base, crash_size, - BOOTMEM_DEFAULT); } else printk(KERN_INFO "crashkernel reservation failed - " "you have to specify a base address\n"); -- cgit v0.10.2 From ec64b6c8763c83899908fdd62746435c19211686 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 19 Jun 2008 17:07:15 +0800 Subject: Blackfin arch: fix typo error in bf548 serial header file Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index 59b4ad4..aabe5b9 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -187,7 +187,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) #ifdef CONFIG_BFIN_UART1_CTSRTS peripheral_request(P_UART1_RTS, DRIVER_NAME); - peripheral_request(P_UART1_CTS DRIVER_NAME); + peripheral_request(P_UART1_CTS, DRIVER_NAME); #endif #endif @@ -202,7 +202,7 @@ static void bfin_serial_hw_init(struct bfin_serial_port *uart) #ifdef CONFIG_BFIN_UART3_CTSRTS peripheral_request(P_UART3_RTS, DRIVER_NAME); - peripheral_request(P_UART3_CTS DRIVER_NAME); + peripheral_request(P_UART3_CTS, DRIVER_NAME); #endif #endif SSYNC(); -- cgit v0.10.2 From f30ac0ce34f32bb998ac87e37b251374de03e603 Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Thu, 19 Jun 2008 17:46:39 +0800 Subject: Blackfin Serial Driver: Use timer to poll CTS PIN instead of workqueue. This allows other threads to run when the serial driver polls the CTS PIN in a loop. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index f20952c..fd9bb77 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -49,6 +49,7 @@ #define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) #define DMA_RX_FLUSH_JIFFIES (HZ / 50) +#define CTS_CHECK_JIFFIES (HZ / 50) #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); @@ -290,11 +291,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) { struct circ_buf *xmit = &uart->port.info->xmit; - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } /* * Check the modem control lines before * transmitting anything. @@ -306,6 +302,12 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) return; } + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); @@ -345,15 +347,6 @@ static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) } #endif -#ifdef CONFIG_SERIAL_BFIN_CTSRTS -static void bfin_serial_do_work(struct work_struct *work) -{ - struct bfin_serial_port *uart = container_of(work, struct bfin_serial_port, cts_workqueue); - - bfin_serial_mctrl_check(uart); -} -#endif - #ifdef CONFIG_SERIAL_BFIN_DMA static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) { @@ -361,6 +354,12 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->tx_done = 0; + /* + * Check the modem control lines before + * transmitting anything. + */ + bfin_serial_mctrl_check(uart); + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { uart->tx_count = 0; uart->tx_done = 1; @@ -373,12 +372,6 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) uart->port.x_char = 0; } - /* - * Check the modem control lines before - * transmitting anything. - */ - bfin_serial_mctrl_check(uart); - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) uart->tx_count = UART_XMIT_SIZE - xmit->tail; @@ -565,7 +558,10 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart) uart_handle_cts_change(&uart->port, status & TIOCM_CTS); if (!(status & TIOCM_CTS)) { tty->hw_stopped = 1; - schedule_work(&uart->cts_workqueue); + uart->cts_timer.data = (unsigned long)(uart); + uart->cts_timer.function = (void *)bfin_serial_mctrl_check; + uart->cts_timer.expires = jiffies + CTS_CHECK_JIFFIES; + add_timer(&(uart->cts_timer)); } else { tty->hw_stopped = 0; } @@ -885,7 +881,7 @@ static void __init bfin_serial_init_ports(void) init_timer(&(bfin_serial_ports[i].rx_dma_timer)); #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - INIT_WORK(&bfin_serial_ports[i].cts_workqueue, bfin_serial_do_work); + init_timer(&(bfin_serial_ports[i].cts_timer)); bfin_serial_ports[i].cts_pin = bfin_serial_resource[i].uart_cts_pin; bfin_serial_ports[i].rts_pin = diff --git a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h index 96bd09e..2526b6e 100644 --- a/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf527/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h index e924569..ebf592b 100644 --- a/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf533/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h index 41d7b64..1bf56ff 100644 --- a/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf537/bfin_serial_5xx.h @@ -96,7 +96,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h index aabe5b9..5e29446 100644 --- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h @@ -99,7 +99,7 @@ struct bfin_serial_port { struct work_struct tx_dma_workqueue; #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif diff --git a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h index 30d90b5..8aa0278 100644 --- a/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h +++ b/include/asm-blackfin/mach-bf561/bfin_serial_5xx.h @@ -88,7 +88,7 @@ struct bfin_serial_port { # endif #endif #ifdef CONFIG_SERIAL_BFIN_CTSRTS - struct work_struct cts_workqueue; + struct timer_list cts_timer; int cts_pin; int rts_pin; #endif -- cgit v0.10.2 From d38b149794e7444a55e741446717147e7f0467f8 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 3 Apr 2008 10:40:39 +0200 Subject: hwmon: (lm85) Fix function RANGE_TO_REG() Function RANGE_TO_REG() is broken. For a requested range of 2000 (2 degrees C), it will return an index value of 15, i.e. 80.0 degrees C, instead of the expected index value of 0. All other values are handled properly, just 2000 isn't. The bug was introduced back in November 2004 by this patch: http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commit;h=1c28d80f1992240373099d863e4996cdd5d646d0 While this can be fixed easily with the current code, I'd rather rewrite the whole function in a way which is more obviously correct. Signed-off-by: Jean Delvare Cc: Justin Thiessen Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c index 182fe6a..ee5eca1 100644 --- a/drivers/hwmon/lm85.c +++ b/drivers/hwmon/lm85.c @@ -192,23 +192,20 @@ static int RANGE_TO_REG( int range ) { int i; - if ( range < lm85_range_map[0] ) { - return 0 ; - } else if ( range > lm85_range_map[15] ) { + if (range >= lm85_range_map[15]) return 15 ; - } else { /* find closest match */ - for ( i = 14 ; i >= 0 ; --i ) { - if ( range > lm85_range_map[i] ) { /* range bracketed */ - if ((lm85_range_map[i+1] - range) < - (range - lm85_range_map[i])) { - i++; - break; - } - break; - } + + /* Find the closest match */ + for (i = 14; i >= 0; --i) { + if (range >= lm85_range_map[i]) { + if ((lm85_range_map[i + 1] - range) < + (range - lm85_range_map[i])) + return i + 1; + return i; } } - return( i & 0x0f ); + + return 0; } #define RANGE_FROM_REG(val) (lm85_range_map[(val)&0x0f]) -- cgit v0.10.2 From ed4ec814e45ae8b1596aea0a29b92f6c3614acaa Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 26 Apr 2008 16:34:26 +0200 Subject: hwmon: (adt7473) Initialize max_duty_at_overheat before use data->max_duty_at_overheat is not updated in adt7473_update_device, so it might be used before it is initialized (if the user reads from sysfs file max_duty_at_crit before writing to it.) Signed-off-by: Jean Delvare Acked-by: Darrick J. Wong Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/adt7473.c b/drivers/hwmon/adt7473.c index c1009d6..93dbf5e 100644 --- a/drivers/hwmon/adt7473.c +++ b/drivers/hwmon/adt7473.c @@ -309,6 +309,9 @@ no_sensor_update: ADT7473_REG_PWM_BHVR(i)); } + i = i2c_smbus_read_byte_data(client, ADT7473_REG_CFG4); + data->max_duty_at_overheat = !!(i & ADT7473_CFG4_MAX_DUTY_AT_OVT); + data->limits_last_updated = local_jiffies; data->limits_valid = 1; -- cgit v0.10.2 From 125ff8087fca28e922e7ad6e082efcf04fe2f0f4 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sat, 23 Feb 2008 10:57:53 +0100 Subject: hwmon: Update the sysfs interface documentation * Document the characteristics of libsensors 3.0.0 and 3.0.1. * The sysfs interface is no longer subject to changes. Signed-off-by: Jean Delvare Acked-by: Juerg Haefliger Signed-off-by: Mark M. Hoffman diff --git a/Documentation/hwmon/sysfs-interface b/Documentation/hwmon/sysfs-interface index f4a8ebc..2d84573 100644 --- a/Documentation/hwmon/sysfs-interface +++ b/Documentation/hwmon/sysfs-interface @@ -2,17 +2,12 @@ Naming and data format standards for sysfs files ------------------------------------------------ The libsensors library offers an interface to the raw sensors data -through the sysfs interface. See libsensors documentation and source for -further information. As of writing this document, libsensors -(from lm_sensors 2.8.3) is heavily chip-dependent. Adding or updating -support for any given chip requires modifying the library's code. -This is because libsensors was written for the procfs interface -older kernel modules were using, which wasn't standardized enough. -Recent versions of libsensors (from lm_sensors 2.8.2 and later) have -support for the sysfs interface, though. - -The new sysfs interface was designed to be as chip-independent as -possible. +through the sysfs interface. Since lm-sensors 3.0.0, libsensors is +completely chip-independent. It assumes that all the kernel drivers +implement the standard sysfs interface described in this document. +This makes adding or updating support for any given chip very easy, as +libsensors, and applications using it, do not need to be modified. +This is a major improvement compared to lm-sensors 2. Note that motherboards vary widely in the connections to sensor chips. There is no standard that ensures, for example, that the second @@ -35,19 +30,17 @@ access this data in a simple and consistent way. That said, such programs will have to implement conversion, labeling and hiding of inputs. For this reason, it is still not recommended to bypass the library. -If you are developing a userspace application please send us feedback on -this standard. - -Note that this standard isn't completely established yet, so it is subject -to changes. If you are writing a new hardware monitoring driver those -features can't seem to fit in this interface, please contact us with your -extension proposal. Keep in mind that backward compatibility must be -preserved. - Each chip gets its own directory in the sysfs /sys/devices tree. To find all sensor chips, it is easier to follow the device symlinks from /sys/class/hwmon/hwmon*. +Up to lm-sensors 3.0.0, libsensors looks for hardware monitoring attributes +in the "physical" device directory. Since lm-sensors 3.0.1, attributes found +in the hwmon "class" device directory are also supported. Complex drivers +(e.g. drivers for multifunction chips) may want to use this possibility to +avoid namespace pollution. The only drawback will be that older versions of +libsensors won't support the driver in question. + All sysfs values are fixed point numbers. There is only one value per file, unlike the older /proc specification. -- cgit v0.10.2 From 1604e78b7d6e6087ae9bde6e7a6b41cda80d6557 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 26 Feb 2008 19:34:48 +0100 Subject: hwmon: (abituguru3) Identify Abit AW8D board as such This patch identifies the Abit AW8D board as such, and adds support for its aux5 fan connector Signed-off-by: Hans de Goede Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index ed33fdd..f2086e9 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -323,7 +323,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0013, "unknown", { + { 0x0013, "Abit AW8D", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -349,6 +349,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX2 Fan", 36, 2, 60, 1, 0 }, { "AUX3 Fan", 37, 2, 60, 1, 0 }, { "AUX4 Fan", 38, 2, 60, 1, 0 }, + { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, { 0x0014, "Abit AB9 Pro", { -- cgit v0.10.2 From 25845c22647fad2a0852cf6bf277d84e8a7a6b4a Mon Sep 17 00:00:00 2001 From: Marc Hulsman Date: Sun, 8 Jun 2008 10:59:41 -0400 Subject: hwmon: (w83791d) new maintainer Signed-off-by: Charles Spirakis Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman diff --git a/MAINTAINERS b/MAINTAINERS index 9d43042..fa30364 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4428,10 +4428,10 @@ M: johnpol@2ka.mipt.ru S: Maintained W83791D HARDWARE MONITORING DRIVER -P: Charles Spirakis -M: bezaur@gmail.com +P: Marc Hulsman +M: m.hulsman@tudelft.nl L: lm-sensors@lm-sensors.org -S: Odd Fixes +S: Maintained W83793 HARDWARE MONITORING DRIVER P: Rudolf Marek -- cgit v0.10.2 From b3aeab0cdbd0fe5339a3a5918b59eebf148cbcd1 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 23 May 2008 16:10:41 +0200 Subject: hwmon: (abituguru3) update driver detection It has been reported that the abituguru3 driver fails to load after a BIOS update. This patch fixes this by loosening the detection routine so that it will work after the BIOS update too. To compensate for the now very loose detection an additional check is added on the DMI Base Board vendor string to make sure we only load on Abit motherboards, this is the same as the check in the abituguru (1 / 2) driver. Signed-of-by: Hans de Goede Signed-off-by: Alistair John Strachan Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index f2086e9..f00f497 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -30,6 +30,7 @@ #include #include #include +#include #include /* uGuru3 bank addresses */ @@ -1112,11 +1113,12 @@ static int __init abituguru3_detect(void) { /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or 0x08 at DATA and 0xAC at CMD. Sometimes the uGuru3 will hold 0x05 - at CMD instead, why is unknown. So we test for 0x05 too. */ + or 0x55 at CMD instead, why is unknown. */ u8 data_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_DATA); u8 cmd_val = inb_p(ABIT_UGURU3_BASE + ABIT_UGURU3_CMD); if (((data_val == 0x00) || (data_val == 0x08)) && - ((cmd_val == 0xAC) || (cmd_val == 0x05))) + ((cmd_val == 0xAC) || (cmd_val == 0x05) || + (cmd_val == 0x55))) return ABIT_UGURU3_BASE; ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = " @@ -1139,6 +1141,15 @@ static int __init abituguru3_init(void) int address, err; struct resource res = { .flags = IORESOURCE_IO }; +#ifdef CONFIG_DMI + const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + + /* safety check, refuse to load on non Abit motherboards */ + if (!force && (!board_vendor || + strcmp(board_vendor, "http://www.abit.com.tw/"))) + return -ENODEV; +#endif + address = abituguru3_detect(); if (address < 0) return address; -- cgit v0.10.2 From bcccc3a28e9cbb44549cde326852c26203a53a56 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 3 May 2008 19:19:16 -0700 Subject: hwmon: (lm75) sensor reading bugfix LM75 sensor reading bugfix: never save error status as valid sensor output. This could be improved, but at least this prevents certain rude failure modes. Signed-off-by: David Brownell Acked-by: Jean Delvare Signed-off-by: Mark M. Hoffman diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c index fa76969..de698dc 100644 --- a/drivers/hwmon/lm75.c +++ b/drivers/hwmon/lm75.c @@ -251,10 +251,13 @@ static int lm75_detach_client(struct i2c_client *client) the SMBus standard. */ static int lm75_read_value(struct i2c_client *client, u8 reg) { + int value; + if (reg == LM75_REG_CONF) return i2c_smbus_read_byte_data(client, reg); - else - return swab16(i2c_smbus_read_word_data(client, reg)); + + value = i2c_smbus_read_word_data(client, reg); + return (value < 0) ? value : swab16(value); } static int lm75_write_value(struct i2c_client *client, u8 reg, u16 value) @@ -287,9 +290,16 @@ static struct lm75_data *lm75_update_device(struct device *dev) int i; dev_dbg(&client->dev, "Starting lm75 update\n"); - for (i = 0; i < ARRAY_SIZE(data->temp); i++) - data->temp[i] = lm75_read_value(client, - LM75_REG_TEMP[i]); + for (i = 0; i < ARRAY_SIZE(data->temp); i++) { + int status; + + status = lm75_read_value(client, LM75_REG_TEMP[i]); + if (status < 0) + dev_dbg(&client->dev, "reg %d, err %d\n", + LM75_REG_TEMP[i], status); + else + data->temp[i] = status; + } data->last_updated = jiffies; data->valid = 1; } -- cgit v0.10.2 From d4abc238c9f4df8b3216f3e883f5d0a07b7ac75a Mon Sep 17 00:00:00 2001 From: Bharath Ravi Date: Mon, 16 Jun 2008 15:11:01 +0530 Subject: sched, delay accounting: fix incorrect delay time when constantly waiting on runqueue This patch corrects the incorrect value of per process run-queue wait time reported by delay statistics. The anomaly was due to the following reason. When a process leaves the CPU and immediately starts waiting for CPU on the runqueue (which means it remains in the TASK_RUNNABLE state), the time of re-entry into the run-queue is never recorded. Due to this, the waiting time on the runqueue from this point of re-entry upto the next time it hits the CPU is not accounted for. This is solved by recording the time of re-entry of a process leaving the CPU in the sched_info_depart() function IF the process will go back to waiting on the run-queue. This IF condition is verified by checking whether the process is still in the TASK_RUNNABLE state. The patch was tested on 2.6.26-rc6 using two simple CPU hog programs. The values noted prior to the fix did not account for the time spent on the runqueue waiting. After the fix, the correct values were reported back to user space. Signed-off-by: Bharath Ravi Signed-off-by: Madhava K R Cc: dhaval@linux.vnet.ibm.com Cc: vatsa@in.ibm.com Cc: balbir@in.ibm.com Acked-by: Peter Zijlstra Signed-off-by: Ingo Molnar diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index a38878e..80179ef 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -198,6 +198,9 @@ static inline void sched_info_queued(struct task_struct *t) /* * Called when a process ceases being the active-running process, either * voluntarily or involuntarily. Now we can calculate how long we ran. + * Also, if the process is still in the TASK_RUNNING state, call + * sched_info_queued() to mark that it has now again started waiting on + * the runqueue. */ static inline void sched_info_depart(struct task_struct *t) { @@ -206,6 +209,9 @@ static inline void sched_info_depart(struct task_struct *t) t->sched_info.cpu_time += delta; rq_sched_info_depart(task_rq(t), delta); + + if (t->state == TASK_RUNNING) + sched_info_queued(t); } /* -- cgit v0.10.2 From ffe6e1da86d21d7855495b5a772c93f050258f6e Mon Sep 17 00:00:00 2001 From: Jordan Crouse Date: Wed, 18 Jun 2008 11:34:38 -0600 Subject: x86, geode: add a VSA2 ID for General Software General Software writes their own VSA2 module for their version of the Geode BIOS, which returns a different ID then the standard VSA2. This was causing the framebuffer driver to break for most GSW boards. Signed-off-by: Jordan Crouse Cc: tglx@linutronix.de Cc: linux-geode@lists.infradead.org Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/geode_32.c b/arch/x86/kernel/geode_32.c index e8edd63..9b08e85 100644 --- a/arch/x86/kernel/geode_32.c +++ b/arch/x86/kernel/geode_32.c @@ -166,6 +166,8 @@ int geode_has_vsa2(void) static int has_vsa2 = -1; if (has_vsa2 == -1) { + u16 val; + /* * The VSA has virtual registers that we can query for a * signature. @@ -173,7 +175,8 @@ int geode_has_vsa2(void) outw(VSA_VR_UNLOCK, VSA_VRC_INDEX); outw(VSA_VR_SIGNATURE, VSA_VRC_INDEX); - has_vsa2 = (inw(VSA_VRC_DATA) == VSA_SIG); + val = inw(VSA_VRC_DATA); + has_vsa2 = (val == AMD_VSA_SIG || val == GSW_VSA_SIG); } return has_vsa2; diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index 6e64588..bb06027 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -112,8 +112,8 @@ extern int geode_get_dev_base(unsigned int dev); #define VSA_VR_UNLOCK 0xFC53 /* unlock virtual register */ #define VSA_VR_SIGNATURE 0x0003 #define VSA_VR_MEM_SIZE 0x0200 -#define VSA_SIG 0x4132 /* signature is ascii 'VSA2' */ - +#define AMD_VSA_SIG 0x4132 /* signature is ascii 'VSA2' */ +#define GSW_VSA_SIG 0x534d /* General Software signature */ /* GPIO */ #define GPIO_OUTPUT_VAL 0x00 -- cgit v0.10.2 From aea7427f70cce5fa8f99ce447b213e9e3b49f24c Mon Sep 17 00:00:00 2001 From: Shan Wei Date: Thu, 19 Jun 2008 16:29:39 -0700 Subject: ipv6: Remove options header when setsockopt's optlen is 0 Remove the sticky Hop-by-Hop options header by calling setsockopt() for IPV6_HOPOPTS with a zero option length, per RFC3542. Routing header and Destination options header does the same as Hop-by-Hop options header. Signed-off-by: Shan Wei Acked-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index c042ce1..86e28a7 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -345,18 +345,21 @@ static int do_ipv6_setsockopt(struct sock *sk, int level, int optname, case IPV6_DSTOPTS: { struct ipv6_txoptions *opt; + + /* remove any sticky options header with a zero option + * length, per RFC3542. + */ if (optlen == 0) optval = NULL; + else if (optlen < sizeof(struct ipv6_opt_hdr) || + optlen & 0x7 || optlen > 8 * 255) + goto e_inval; /* hop-by-hop / destination options are privileged option */ retv = -EPERM; if (optname != IPV6_RTHDR && !capable(CAP_NET_RAW)) break; - if (optlen < sizeof(struct ipv6_opt_hdr) || - optlen & 0x7 || optlen > 8 * 255) - goto e_inval; - opt = ipv6_renew_options(sk, np->opt, optname, (struct ipv6_opt_hdr __user *)optval, optlen); -- cgit v0.10.2 From f630e43a215a3129d0c1173cae0bce6ea4855cf7 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Thu, 19 Jun 2008 16:33:57 -0700 Subject: ipv6: Drop packets for loopback address from outside of the box. [ Based upon original report and patch by Karsten Keil. Karsten has verified that this fixes the TAHI test case "ICMPv6 test v6LC.5.1.2 Part F". -DaveM ] Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/include/net/ipv6.h b/include/net/ipv6.h index e0a612b..f422f72 100644 --- a/include/net/ipv6.h +++ b/include/net/ipv6.h @@ -367,6 +367,12 @@ static inline int ipv6_addr_any(const struct in6_addr *a) a->s6_addr32[2] | a->s6_addr32[3] ) == 0); } +static inline int ipv6_addr_loopback(const struct in6_addr *a) +{ + return ((a->s6_addr32[0] | a->s6_addr32[1] | + a->s6_addr32[2] | (a->s6_addr32[3] ^ htonl(1))) == 0); +} + static inline int ipv6_addr_v4mapped(const struct in6_addr *a) { return ((a->s6_addr32[0] | a->s6_addr32[1] | diff --git a/net/ipv6/ip6_input.c b/net/ipv6/ip6_input.c index 4e5c861..17eb48b 100644 --- a/net/ipv6/ip6_input.c +++ b/net/ipv6/ip6_input.c @@ -102,6 +102,15 @@ int ipv6_rcv(struct sk_buff *skb, struct net_device *dev, struct packet_type *pt if (hdr->version != 6) goto err; + /* + * RFC4291 2.5.3 + * A packet received on an interface with a destination address + * of loopback must be dropped. + */ + if (!(dev->flags & IFF_LOOPBACK) && + ipv6_addr_loopback(&hdr->daddr)) + goto err; + skb->transport_header = skb->network_header + sizeof(*hdr); IP6CB(skb)->nhoff = offsetof(struct ipv6hdr, nexthdr); -- cgit v0.10.2 From 7d15ddf79ec35ce79093832c80b86c0888eb5bce Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 20 Jun 2008 11:48:06 +1000 Subject: [agp]: fixup chipset flush for new Intel G4x. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/agp/intel-agp.c b/drivers/char/agp/intel-agp.c index 1ae64bb..df70264 100644 --- a/drivers/char/agp/intel-agp.c +++ b/drivers/char/agp/intel-agp.c @@ -948,7 +948,7 @@ static void intel_i9xx_setup_flush(void) intel_private.ifp_resource.flags = IORESOURCE_MEM; /* Setup chipset flush for 915 */ - if (IS_I965 || IS_G33) { + if (IS_I965 || IS_G33 || IS_G4X) { intel_i965_g33_setup_chipset_flush(); } else { intel_i915_setup_chipset_flush(); -- cgit v0.10.2 From d3adbc0c582b767ba1561ffa38313e905cc917ea Mon Sep 17 00:00:00 2001 From: Zhenyu Wang Date: Fri, 20 Jun 2008 12:12:56 +1000 Subject: drm/i915: add support for Intel series 4 chipsets. Signed-off-by: Zhenyu Wang Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_pciids.h b/drivers/char/drm/drm_pciids.h index bad096f..135bd19 100644 --- a/drivers/char/drm/drm_pciids.h +++ b/drivers/char/drm/drm_pciids.h @@ -409,4 +409,7 @@ {0x8086, 0x2a02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0x8086, 0x2a42, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e02, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e12, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ + {0x8086, 0x2e22, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0}, \ {0, 0, 0} diff --git a/drivers/char/drm/i915_drv.h b/drivers/char/drm/i915_drv.h index 1b20f7c..d7326d9 100644 --- a/drivers/char/drm/i915_drv.h +++ b/drivers/char/drm/i915_drv.h @@ -1112,12 +1112,19 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); (dev)->pci_device == 0x29A2 || \ (dev)->pci_device == 0x2A02 || \ (dev)->pci_device == 0x2A12 || \ - (dev)->pci_device == 0x2A42) + (dev)->pci_device == 0x2A42 || \ + (dev)->pci_device == 0x2E02 || \ + (dev)->pci_device == 0x2E12 || \ + (dev)->pci_device == 0x2E22) #define IS_I965GM(dev) ((dev)->pci_device == 0x2A02) #define IS_IGD_GM(dev) ((dev)->pci_device == 0x2A42) +#define IS_G4X(dev) ((dev)->pci_device == 0x2E02 || \ + (dev)->pci_device == 0x2E12 || \ + (dev)->pci_device == 0x2E22) + #define IS_G33(dev) ((dev)->pci_device == 0x29C2 || \ (dev)->pci_device == 0x29B2 || \ (dev)->pci_device == 0x29D2) @@ -1128,7 +1135,7 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller); #define IS_MOBILE(dev) (IS_I830(dev) || IS_I85X(dev) || IS_I915GM(dev) || \ IS_I945GM(dev) || IS_I965GM(dev) || IS_IGD_GM(dev)) -#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev)) +#define I915_NEED_GFX_HWS(dev) (IS_G33(dev) || IS_IGD_GM(dev) || IS_G4X(dev)) #define PRIMARY_RINGBUFFER_SIZE (128*1024) -- cgit v0.10.2 From 858a3685bcf3ac199128e4aa85eaae2fb9d191b5 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Fri, 20 Jun 2008 15:42:38 +1000 Subject: drm: only trust core drm ioctls - driver ioctls are a mess. So driver ioctls need a full auditing before we can make this change. Signed-off-by: Dave Airlie diff --git a/drivers/char/drm/drm_drv.c b/drivers/char/drm/drm_drv.c index 22957ac1..5641387 100644 --- a/drivers/char/drm/drm_drv.c +++ b/drivers/char/drm/drm_drv.c @@ -470,19 +470,18 @@ int drm_ioctl(struct inode *inode, struct file *filp, if ((nr >= DRM_COMMAND_BASE) && (nr < DRM_COMMAND_END) && (nr < DRM_COMMAND_BASE + dev->driver->num_ioctls)) ioctl = &dev->driver->ioctls[nr - DRM_COMMAND_BASE]; - else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) + else if ((nr >= DRM_COMMAND_END) || (nr < DRM_COMMAND_BASE)) { ioctl = &drm_ioctls[nr]; - else + cmd = ioctl->cmd; + } else goto err_i1; /* Do not trust userspace, use our own definition */ - cmd = ioctl->cmd; func = ioctl->func; /* is there a local override? */ if ((nr == DRM_IOCTL_NR(DRM_IOCTL_DMA)) && dev->driver->dma_ioctl) func = dev->driver->dma_ioctl; - if (!func) { DRM_DEBUG("no function\n"); retcode = -EINVAL; -- cgit v0.10.2 From 8a8cde163ea724baf74e7752a31a69d3121a240e Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Thu, 19 Jun 2008 14:22:28 +0200 Subject: sched: rt: dont stop the period timer when there are tasks wanting to run So if the group ever gets throttled, it will never wake up again. Reported-by: "Daniel K." Signed-off-by: Peter Zijlstra Tested-by: Daniel K. Signed-off-by: Ingo Molnar diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 1dad5bb..0f3c191 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -250,7 +250,8 @@ static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun) if (rt_rq->rt_time || rt_rq->rt_nr_running) idle = 0; spin_unlock(&rt_rq->rt_runtime_lock); - } + } else if (rt_rq->rt_nr_running) + idle = 0; if (enqueue) sched_rt_rq_enqueue(rt_rq); -- cgit v0.10.2 From bb10ed0994927d433f6dbdf274fdb26cfcf516b7 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Thu, 19 Jun 2008 15:04:07 -0700 Subject: sched: fix wait_for_completion_timeout() spurious failure under heavy load It seems that the current implementaton of wait_for_completion_timeout() has a small problem under very high load for the common pattern: if (!wait_for_completion_timeout(&done, timeout)) /* handle failure */ because the implementation very roughly does (lots of code deleted to show the basic flow): static inline long __sched do_wait_for_common(struct completion *x, long timeout, int state) { if (x->done) return timeout; do { timeout = schedule_timeout(timeout); if (!timeout) return timeout; } while (!x->done); return timeout; } so if the system is very busy and x->done is not set when do_wait_for_common() is entered, it is possible that the first call to schedule_timeout() returns 0 because the task doing wait_for_completion doesn't get rescheduled for a long time, even if it is woken up early enough. In this case, wait_for_completion_timeout() returns 0 without even checking x->done again, and the code above falls into its failure case purely for scheduler reasons, even if the hardware event or whatever was being waited for happened early enough. It would make sense to add an extra test to do_wait_for() in the timeout case and return 1 if x->done is actually set. A quick audit (not exhaustive) of wait_for_completion_timeout() callers seems to indicate that no one actually cares about the return value in the success case -- they just test for 0 (timed out) versus non-zero (wait succeeded). Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 4a3cb06..577f160 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4405,6 +4405,16 @@ do_wait_for_common(struct completion *x, long timeout, int state) spin_unlock_irq(&x->wait.lock); timeout = schedule_timeout(timeout); spin_lock_irq(&x->wait.lock); + + /* + * If the completion has arrived meanwhile + * then return 1 jiffy time left: + */ + if (x->done && !timeout) { + timeout = 1; + break; + } + if (!timeout) { __remove_wait_queue(&x->wait, &wait); return timeout; -- cgit v0.10.2 From 54481cf88bc59923ea30f2ca345a73c60155e901 Mon Sep 17 00:00:00 2001 From: Suresh Siddha Date: Thu, 19 Jun 2008 09:41:22 -0700 Subject: x86: fix NULL pointer deref in __switch_to MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit I am able to reproduce the oops reported by Simon in __switch_to() with lguest. My debug showed that there is at least one lguest specific issue (which should be present in 2.6.25 and before aswell) and it got exposed with a kernel oops with the recent fpu dynamic allocation patches. In addition to the previous possible scenario (with fpu_counter), in the presence of lguest, it is possible that the cpu's TS bit it still set and the lguest launcher task's thread_info has TS_USEDFPU still set. This is because of the way the lguest launcher handling the guest's TS bit. (look at lguest_set_ts() in lguest_arch_run_guest()). This can result in a DNA fault while doing unlazy_fpu() in __switch_to(). This will end up causing a DNA fault in the context of new process thats getting context switched in (as opossed to handling DNA fault in the context of lguest launcher/helper process). This is wrong in both pre and post 2.6.25 kernels. In the recent 2.6.26-rc series, this is showing up as NULL pointer dereferences or sleeping function called from atomic context(__switch_to()), as we free and dynamically allocate the FPU context for the newly created threads. Older kernels might show some FPU corruption for processes running inside of lguest. With the appended patch, my test system is running for more than 50 mins now. So atleast some of your oops (hopefully all!) should get fixed. Please give it a try. I will spend more time with this fix tomorrow. Reported-by: Simon Holm Thøgersen Reported-by: Patrick McHardy Signed-off-by: Suresh Siddha Signed-off-by: Ingo Molnar diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c index 5126d5d..2e554a4 100644 --- a/drivers/lguest/x86/core.c +++ b/drivers/lguest/x86/core.c @@ -176,7 +176,7 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) * we set it now, so we can trap and pass that trap to the Guest if it * uses the FPU. */ if (cpu->ts) - lguest_set_ts(); + unlazy_fpu(current); /* SYSENTER is an optimized way of doing system calls. We can't allow * it because it always jumps to privilege level 0. A normal Guest @@ -196,6 +196,10 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) * trap made the switcher code come back, and an error code which some * traps set. */ + /* Restore SYSENTER if it's supposed to be on. */ + if (boot_cpu_has(X86_FEATURE_SEP)) + wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); + /* If the Guest page faulted, then the cr2 register will tell us the * bad virtual address. We have to grab this now, because once we * re-enable interrupts an interrupt could fault and thus overwrite @@ -203,13 +207,12 @@ void lguest_arch_run_guest(struct lg_cpu *cpu) if (cpu->regs->trapnum == 14) cpu->arch.last_pagefault = read_cr2(); /* Similarly, if we took a trap because the Guest used the FPU, - * we have to restore the FPU it expects to see. */ + * we have to restore the FPU it expects to see. + * math_state_restore() may sleep and we may even move off to + * a different CPU. So all the critical stuff should be done + * before this. */ else if (cpu->regs->trapnum == 7) math_state_restore(); - - /* Restore SYSENTER if it's supposed to be on. */ - if (boot_cpu_has(X86_FEATURE_SEP)) - wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0); } /*H:130 Now we've examined the hypercall code; our Guest can make requests. -- cgit v0.10.2 From 46539383791a0e59a4af7412056dfbfc5240af0a Mon Sep 17 00:00:00 2001 From: Isaku Yamahata Date: Mon, 16 Jun 2008 14:58:13 -0700 Subject: xen: Use wmb instead of rmb in xen_evtchn_do_upcall(). This patch is ported one from 534:77db69c38249 of linux-2.6.18-xen.hg. Use wmb instead of rmb to enforce ordering between evtchn_upcall_pending and evtchn_pending_sel stores in xen_evtchn_do_upcall(). Cc: Samuel Thibault Signed-off-by: Isaku Yamahata Cc: Nick Piggin Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar diff --git a/drivers/xen/events.c b/drivers/xen/events.c index 4f0f22b..76e5b73 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -529,7 +529,7 @@ void xen_evtchn_do_upcall(struct pt_regs *regs) #ifndef CONFIG_X86 /* No need for a barrier -- XCHG is a barrier on x86. */ /* Clear master flag /before/ clearing selector flag. */ - rmb(); + wmb(); #endif pending_words = xchg(&vcpu_info->evtchn_pending_sel, 0); while (pending_words != 0) { -- cgit v0.10.2 From 05345b0f006ac226d0d25d48fcb2d792ac44a071 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 16 Jun 2008 15:01:53 -0700 Subject: xen: mask unwanted pte bits in __supported_pte_mask [ Stable: this isn't a bugfix in itself, but it's a pre-requiste for "xen: don't drop NX bit" ] Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c8a56e4..c048de3 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1228,6 +1228,11 @@ asmlinkage void __init xen_start_kernel(void) if (xen_feature(XENFEAT_supervisor_mode_kernel)) pv_info.kernel_rpl = 0; + /* Prevent unwanted bits from being set in PTEs. */ + __supported_pte_mask &= ~_PAGE_GLOBAL; + if (!is_initial_xendomain()) + __supported_pte_mask &= ~(_PAGE_PWT | _PAGE_PCD); + /* set the limit of our address space */ xen_reserve_top(); diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 3525ef5..3f2a67f 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -199,10 +199,8 @@ pgdval_t xen_pgd_val(pgd_t pgd) pte_t xen_make_pte(pteval_t pte) { - if (pte & _PAGE_PRESENT) { + if (pte & _PAGE_PRESENT) pte = phys_to_machine(XPADDR(pte)).maddr; - pte &= ~(_PAGE_PCD | _PAGE_PWT); - } return (pte_t){ .pte = pte }; } -- cgit v0.10.2 From ebb9cfe20fe167f29960a5e913193a684fac50bf Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Mon, 16 Jun 2008 15:01:56 -0700 Subject: xen: don't drop NX bit Because NX is now enforced properly, we must put the hypercall page into the .text segment so that it is executable. Signed-off-by: Jeremy Fitzhardinge Cc: Stable Kernel Cc: the arch/x86 maintainers Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 3f2a67f..265601d 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -179,46 +179,54 @@ out: preempt_enable(); } -pteval_t xen_pte_val(pte_t pte) +/* Assume pteval_t is equivalent to all the other *val_t types. */ +static pteval_t pte_mfn_to_pfn(pteval_t val) { - pteval_t ret = pte.pte; + if (val & _PAGE_PRESENT) { + unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT; + pteval_t flags = val & ~PTE_MASK; + val = (mfn_to_pfn(mfn) << PAGE_SHIFT) | flags; + } - if (ret & _PAGE_PRESENT) - ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; + return val; +} - return ret; +static pteval_t pte_pfn_to_mfn(pteval_t val) +{ + if (val & _PAGE_PRESENT) { + unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT; + pteval_t flags = val & ~PTE_MASK; + val = (pfn_to_mfn(pfn) << PAGE_SHIFT) | flags; + } + + return val; +} + +pteval_t xen_pte_val(pte_t pte) +{ + return pte_mfn_to_pfn(pte.pte); } pgdval_t xen_pgd_val(pgd_t pgd) { - pgdval_t ret = pgd.pgd; - if (ret & _PAGE_PRESENT) - ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; - return ret; + return pte_mfn_to_pfn(pgd.pgd); } pte_t xen_make_pte(pteval_t pte) { - if (pte & _PAGE_PRESENT) - pte = phys_to_machine(XPADDR(pte)).maddr; - - return (pte_t){ .pte = pte }; + pte = pte_pfn_to_mfn(pte); + return native_make_pte(pte); } pgd_t xen_make_pgd(pgdval_t pgd) { - if (pgd & _PAGE_PRESENT) - pgd = phys_to_machine(XPADDR(pgd)).maddr; - - return (pgd_t){ pgd }; + pgd = pte_pfn_to_mfn(pgd); + return native_make_pgd(pgd); } pmdval_t xen_pmd_val(pmd_t pmd) { - pmdval_t ret = native_pmd_val(pmd); - if (ret & _PAGE_PRESENT) - ret = machine_to_phys(XMADDR(ret)).paddr | _PAGE_PRESENT; - return ret; + return pte_mfn_to_pfn(pmd.pmd); } #ifdef CONFIG_X86_PAE void xen_set_pud(pud_t *ptr, pud_t val) @@ -265,9 +273,7 @@ void xen_pmd_clear(pmd_t *pmdp) pmd_t xen_make_pmd(pmdval_t pmd) { - if (pmd & _PAGE_PRESENT) - pmd = phys_to_machine(XPADDR(pmd)).maddr; - + pmd = pte_pfn_to_mfn(pmd); return native_make_pmd(pmd); } #else /* !PAE */ diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 288d587..3175e97 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -17,7 +17,7 @@ ENTRY(startup_xen) __FINIT -.pushsection .bss.page_aligned +.pushsection .text .align PAGE_SIZE_asm ENTRY(hypercall_page) .skip 0x1000 -- cgit v0.10.2 From ea71a546706dfdad72462624394e1e472c6bf34f Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 20 Jun 2008 18:32:20 +0400 Subject: sched: refactor wait_for_completion_timeout() Simplify the code and fix the boundary condition of wait_for_completion_timeout(,0). We can kill the first __remove_wait_queue() as well. Signed-off-by: Ingo Molnar Acked-by: Peter Zijlstra diff --git a/kernel/sched.c b/kernel/sched.c index 577f160..bebf978 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4398,32 +4398,20 @@ do_wait_for_common(struct completion *x, long timeout, int state) signal_pending(current)) || (state == TASK_KILLABLE && fatal_signal_pending(current))) { - __remove_wait_queue(&x->wait, &wait); - return -ERESTARTSYS; + timeout = -ERESTARTSYS; + break; } __set_current_state(state); spin_unlock_irq(&x->wait.lock); timeout = schedule_timeout(timeout); spin_lock_irq(&x->wait.lock); - - /* - * If the completion has arrived meanwhile - * then return 1 jiffy time left: - */ - if (x->done && !timeout) { - timeout = 1; - break; - } - - if (!timeout) { - __remove_wait_queue(&x->wait, &wait); - return timeout; - } - } while (!x->done); + } while (!x->done && timeout); __remove_wait_queue(&x->wait, &wait); + if (!x->done) + return timeout; } x->done--; - return timeout; + return timeout ?: 1; } static long __sched -- cgit v0.10.2 From 2856922c158605514ec5974a03097eaec91f4c0d Mon Sep 17 00:00:00 2001 From: Frederic Bohe Date: Fri, 20 Jun 2008 11:48:48 -0400 Subject: Ext4: Fix online resize block group descriptor corruption This is the patch for the group descriptor table corruption during online resize pointed out by Theodore Tso. The problem was caused by the fact that the ext4 group descriptor can be either 32 or 64 bytes long. Only the 64 bytes structure was taken into account. Signed-off-by: Frederic Bohe Signed-off-by: Mingming Cao Signed-off-by: "Theodore Ts'o" diff --git a/fs/ext4/resize.c b/fs/ext4/resize.c index 9ecb92f..9ff7b1c 100644 --- a/fs/ext4/resize.c +++ b/fs/ext4/resize.c @@ -855,7 +855,8 @@ int ext4_group_add(struct super_block *sb, struct ext4_new_group_data *input) */ /* Update group descriptor block for new group */ - gdp = (struct ext4_group_desc *)primary->b_data + gdb_off; + gdp = (struct ext4_group_desc *)((char *)primary->b_data + + gdb_off * EXT4_DESC_SIZE(sb)); ext4_block_bitmap_set(sb, gdp, input->block_bitmap); /* LV FIXME */ ext4_inode_bitmap_set(sb, gdp, input->inode_bitmap); /* LV FIXME */ -- cgit v0.10.2 From 89f5b7da2a6bad2e84670422ab8192382a5aeb9f Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 11:18:25 -0700 Subject: Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP KAMEZAWA Hiroyuki and Oleg Nesterov point out that since the commit 557ed1fa2620dc119adb86b34c614e152a629a80 ("remove ZERO_PAGE") removed the ZERO_PAGE from the VM mappings, any users of get_user_pages() will generally now populate the VM with real empty pages needlessly. We used to get the ZERO_PAGE when we did the "handle_mm_fault()", but since fault handling no longer uses ZERO_PAGE for new anonymous pages, we now need to handle that special case in follow_page() instead. In particular, the removal of ZERO_PAGE effectively removed the core file writing optimization where we would skip writing pages that had not been populated at all, and increased memory pressure a lot by allocating all those useless newly zeroed pages. This reinstates the optimization by making the unmapped PTE case the same as for a non-existent page table, which already did this correctly. While at it, this also fixes the XIP case for follow_page(), where the caller could not differentiate between the case of a page that simply could not be used (because it had no "struct page" associated with it) and a page that just wasn't mapped. We do that by simply returning an error pointer for pages that could not be turned into a "struct page *". The error is arbitrarily picked to be EFAULT, since that was what get_user_pages() already used for the equivalent IO-mapped page case. [ Also removed an impossible test for pte_offset_map_lock() failing: that's not how that function works ] Acked-by: Oleg Nesterov Acked-by: Nick Piggin Cc: KAMEZAWA Hiroyuki Cc: Hugh Dickins Cc: Andrew Morton Cc: Ingo Molnar Cc: Roland McGrath Signed-off-by: Linus Torvalds diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c index c21a626..ce245a8 100644 --- a/arch/powerpc/kernel/vdso.c +++ b/arch/powerpc/kernel/vdso.c @@ -142,7 +142,7 @@ static void dump_one_vdso_page(struct page *pg, struct page *upg) printk("kpg: %p (c:%d,f:%08lx)", __va(page_to_pfn(pg) << PAGE_SHIFT), page_count(pg), pg->flags); - if (upg/* && pg != upg*/) { + if (upg && !IS_ERR(upg) /* && pg != upg*/) { printk(" upg: %p (c:%d,f:%08lx)", __va(page_to_pfn(upg) << PAGE_SHIFT), page_count(upg), diff --git a/mm/memory.c b/mm/memory.c index 19e0ae9..9aefaae 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -999,17 +999,15 @@ struct page *follow_page(struct vm_area_struct *vma, unsigned long address, goto no_page_table; ptep = pte_offset_map_lock(mm, pmd, address, &ptl); - if (!ptep) - goto out; pte = *ptep; if (!pte_present(pte)) - goto unlock; + goto no_page; if ((flags & FOLL_WRITE) && !pte_write(pte)) goto unlock; page = vm_normal_page(vma, address, pte); if (unlikely(!page)) - goto unlock; + goto bad_page; if (flags & FOLL_GET) get_page(page); @@ -1024,6 +1022,15 @@ unlock: out: return page; +bad_page: + pte_unmap_unlock(ptep, ptl); + return ERR_PTR(-EFAULT); + +no_page: + pte_unmap_unlock(ptep, ptl); + if (!pte_none(pte)) + return page; + /* Fall through to ZERO_PAGE handling */ no_page_table: /* * When core dumping an enormous anonymous area that nobody @@ -1159,6 +1166,8 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, cond_resched(); } + if (IS_ERR(page)) + return i ? i : PTR_ERR(page); if (pages) { pages[i] = page; diff --git a/mm/migrate.c b/mm/migrate.c index 449d77d..112bcae 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -865,6 +865,11 @@ static int do_move_pages(struct mm_struct *mm, struct page_to_node *pm, goto set_status; page = follow_page(vma, pp->addr, FOLL_GET); + + err = PTR_ERR(page); + if (IS_ERR(page)) + goto set_status; + err = -ENOENT; if (!page) goto set_status; @@ -928,6 +933,11 @@ static int do_pages_stat(struct mm_struct *mm, struct page_to_node *pm) goto set_status; page = follow_page(vma, pm->addr, 0); + + err = PTR_ERR(page); + if (IS_ERR(page)) + goto set_status; + err = -ENOENT; /* Use PageReserved to check for zero page */ if (!page || PageReserved(page)) -- cgit v0.10.2 From ce42a54946db338e43be9a89c0f7927e02aa3a16 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Fri, 20 Jun 2008 20:53:32 +0200 Subject: palm_bk3710: fix resource management The driver expected a *virtual* address in the IDE platform device's memory resource and didn't request the memory region for the register block. Fix this taking into account the fact that DaVinci SoC devices are fixed-mapped to the virtual memory early and we can get their virtual addresses using IO_ADDRESS() macro, not having to call ioremap()... While at it, also do some cosmetic changes... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c index d024ac8..cc24803 100644 --- a/drivers/ide/arm/palm_bk3710.c +++ b/drivers/ide/arm/palm_bk3710.c @@ -353,8 +353,8 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) struct clk *clkp; struct resource *mem, *irq; ide_hwif_t *hwif; - void __iomem *base; - int pribase, i; + unsigned long base; + int i; hw_regs_t hw; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; @@ -374,22 +374,27 @@ static int __devinit palm_bk3710_probe(struct platform_device *pdev) printk(KERN_ERR "failed to get memory region resource\n"); return -ENODEV; } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (irq == NULL) { printk(KERN_ERR "failed to get IRQ resource\n"); return -ENODEV; } - base = (void *)mem->start; + if (request_mem_region(mem->start, mem->end - mem->start + 1, + "palm_bk3710") == NULL) { + printk(KERN_ERR "failed to request memory region\n"); + return -EBUSY; + } + + base = IO_ADDRESS(mem->start); /* Configure the Palm Chip controller */ - palm_bk3710_chipinit(base); + palm_bk3710_chipinit((void __iomem *)base); - pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET; for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = pribase + i; - hw.io_ports.ctl_addr = mem->start + - IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; + hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; hw.irq = irq->start; hw.chipset = ide_palm3710; @@ -434,4 +439,3 @@ static int __init palm_bk3710_init(void) module_init(palm_bk3710_init); MODULE_LICENSE("GPL"); - -- cgit v0.10.2 From f54feafa6d47d0aa1a96adefdc763b708b02f94f Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 20 Jun 2008 20:53:33 +0200 Subject: ide: increase timeout in wait_drive_not_busy() Some ATAPI devices take longer than the current max timeout value to become ready (i.e. TEAC DV-W28ECW takes 6 ms) so increase the timeout value to 10 ms. This fixes kernel.org bugzilla bug #10887: http://bugzilla.kernel.org/show_bug.cgi?id=10887 Reported-by: Masanari Iida Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 0c908ca..ab545ff 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -225,10 +225,10 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) u8 stat; /* - * Last sector was transfered, wait until drive is ready. - * This can take up to 10 usec, but we will wait max 1 ms. + * Last sector was transfered, wait until device is ready. This can + * take up to 6 ms on some ATAPI devices, so we will wait max 10 ms. */ - for (retries = 0; retries < 100; retries++) { + for (retries = 0; retries < 1000; retries++) { stat = ide_read_status(drive); if (stat & BUSY_STAT) -- cgit v0.10.2 From 74e23386b7818c7edb1252f6661806dd34042db1 Mon Sep 17 00:00:00 2001 From: Matt Reimer Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add an pata/ide ID Add an id for: product info: "M-Systems", "CF300", "" manfid: 0x000a, 0x0000 function: 4 (fixed disk) Signed-off-by: Matt Reimer CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 3d39f9d..c97bc0c 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -414,6 +414,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index f633b6b..655f43a 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -439,6 +439,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDE", 0x547e66dc, 0x5c5ab149), PCMCIA_DEVICE_PROD_ID12("IO DATA", "PCIDEII", 0x547e66dc, 0xb3662674), PCMCIA_DEVICE_PROD_ID12("LOOKMEET", "CBIDE2 ", 0xe37be2b5, 0x8671043b), + PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF300", 0x7ed2ad87, 0x7e9e78ee), PCMCIA_DEVICE_PROD_ID12("M-Systems", "CF500", 0x7ed2ad87, 0x7a13045c), PCMCIA_DEVICE_PROD_ID2("NinjaATA-", 0xebe0bd79), PCMCIA_DEVICE_PROD_ID12("PCMCIA", "CD-ROM", 0x281f1c5d, 0x66536591), -- cgit v0.10.2 From a17bf220231a5061a29a27a99a273246eb3b156e Mon Sep 17 00:00:00 2001 From: Kristoffer Ericson Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia: add another pata/ide ID Addition of Transcend 1GB 45x id so that it is properly detected. [bart: fix typo in ide-cs's ID spotted by Alan Cox] Signed-off-by: William Peters Signed-off-by: Kristoffer Ericson CC: Alan Cox CC: linux-ide@vger.kernel.org Signed-off-by: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index c97bc0c..41b4361 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -425,6 +425,7 @@ static struct pcmcia_device_id pcmcia_devices[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 655f43a..7fde9b6 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -450,6 +450,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_PROD_ID12("SMI VENDOR", "SMI PRODUCT", 0x30896c92, 0x703cc5f6), PCMCIA_DEVICE_PROD_ID12("TOSHIBA", "MK2001MPL", 0xb4585a1a, 0x3489e003), PCMCIA_DEVICE_PROD_ID1("TRANSCEND 512M ", 0xd0909443), + PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF45", 0x709b1bf1, 0xf68b6f32), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS1GCF80", 0x709b1bf1, 0x2a54d4b1), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS2GCF120", 0x709b1bf1, 0x969aa4f2), PCMCIA_DEVICE_PROD_ID12("TRANSCEND", "TS4GCF120", 0x709b1bf1, 0xf54a91c8), -- cgit v0.10.2 From a49c06bfe48c43b4fea4d3789807d8393828ca8a Mon Sep 17 00:00:00 2001 From: Christophe Niclaes Date: Fri, 20 Jun 2008 20:53:34 +0200 Subject: pcmcia ide kingston compactflash's have a new manufacturer id Up to now, Kingston compactflash cards (ab)used the Toshiba Manufacturer's ID, In their new CF cards, they use a new one. Let's the ide subsystem recognize CF cards with the new id. Signed-off-by: Christophe Niclaes Acked-by: Philippe De Muyter Cc: Alan Cox Cc: Dominik Brodowski Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/legacy/ide-cs.c b/drivers/ide/legacy/ide-cs.c index 7fde9b6..3381424 100644 --- a/drivers/ide/legacy/ide-cs.c +++ b/drivers/ide/legacy/ide-cs.c @@ -410,6 +410,7 @@ static struct pcmcia_device_id ide_ids[] = { PCMCIA_DEVICE_MANF_CARD(0x001c, 0x0001), /* Mitsubishi CFA */ PCMCIA_DEVICE_MANF_CARD(0x0032, 0x0704), PCMCIA_DEVICE_MANF_CARD(0x0045, 0x0401), /* SanDisk CFA */ + PCMCIA_DEVICE_MANF_CARD(0x004f, 0x0000), /* Kingston */ PCMCIA_DEVICE_MANF_CARD(0x0098, 0x0000), /* Toshiba */ PCMCIA_DEVICE_MANF_CARD(0x00a4, 0x002d), PCMCIA_DEVICE_MANF_CARD(0x00ce, 0x0000), /* Samsung */ -- cgit v0.10.2 From ac1623625c5818bbdf5c68973098ba386ba7a004 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Fri, 20 Jun 2008 20:53:35 +0200 Subject: BAST: Remove old IDE driver Remove the old BAST IDE driver, as we are now using the platform-pata support. Signed-off-by: Ben Dooks Cc: Jeff Garzik Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 1607536..8e07de2 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -823,13 +823,6 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. -config BLK_DEV_IDE_BAST - tristate "Simtec BAST / Thorcom VR1000 IDE support" - depends on ARM && (ARCH_BAST || MACH_VR1000) - help - Say Y here if you want to support the onboard IDE channels on the - Simtec BAST or the Thorcom VR1000 - config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 936e7b0..5bc2605 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,7 +1,6 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o -obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c deleted file mode 100644 index 8e8c281..0000000 --- a/drivers/ide/arm/bast-ide.c +++ /dev/null @@ -1,90 +0,0 @@ -/* - * Copyright (c) 2003-2004 Simtec Electronics - * Ben Dooks - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * -*/ - -#include -#include -#include -#include - -#include - -#include -#include -#include -#include -#include - -#define DRV_NAME "bast-ide" - -static int __init bastide_register(unsigned int base, unsigned int aux, int irq) -{ - ide_hwif_t *hwif; - hw_regs_t hw; - int i; - u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; - - memset(&hw, 0, sizeof(hw)); - - base += BAST_IDE_CS; - aux += BAST_IDE_CS; - - for (i = 0; i <= 7; i++) { - hw.io_ports_array[i] = (unsigned long)base; - base += 0x20; - } - - hw.io_ports.ctl_addr = aux + (6 * 0x20); - hw.irq = irq; - hw.chipset = ide_generic; - - hwif = ide_find_port(); - if (hwif == NULL) - goto out; - - i = hwif->index; - - ide_init_port_data(hwif, i); - ide_init_port_hw(hwif, &hw); - hwif->port_ops = NULL; - - idx[0] = i; - - ide_device_add(idx, NULL); -out: - return 0; -} - -static int __init bastide_init(void) -{ - unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; - - /* we can treat the VR1000 and the BAST the same */ - - if (!(machine_is_bast() || machine_is_vr1000())) - return 0; - - printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); - - if (!request_mem_region(base, 0x400000, DRV_NAME)) { - printk(KERN_ERR "%s: resources busy\n", DRV_NAME); - return -EBUSY; - } - - bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); - bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); - - return 0; -} - -module_init(bastide_init); - -MODULE_AUTHOR("Ben Dooks "); -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v0.10.2 From e0c6d97c65e0784aade7e97b9411f245a6c543e7 Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Fri, 20 Jun 2008 12:02:00 -0700 Subject: [IA64] SN2: security hole in sn2_ptc_proc_write Security hole in sn2_ptc_proc_write It is possible to overrun a buffer with a write to this /proc file. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 49d3120..6dd886c 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -512,6 +512,8 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si int cpu; char optstr[64]; + if (count > sizeof(optstr)) + return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; optstr[count - 1] = '\0'; -- cgit v0.10.2 From 1f6ef2342972dc7fd623f360f84006e2304eb935 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 12:19:28 -0700 Subject: [watchdog] hpwdt: fix use of inline assembly MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The inline assembly in drivers/watchdog/hpwdt.c was incredibly broken, and included all the function prologue and epilogue stuff, even though it was itself then inside a C function where the compiler would add its own prologue and epilogue on top of it all. This then just _happened_ to work if you had exactly the right compiler version and exactly the right compiler flags, so that gcc just happened to not create any prologue at all (the gcc-generated epilogue wouldn't matter, since it would never be reached). But the more proper way to fix it is to simply not do this. Move the inline asm to the top level, with no surrounding function at all (the better alternative would be to remove the prologue and make it actually use proper description of the arguments to the inline asm, but that's a bigger change than the one I'm willing to make right now). Tested-by: S.ÇaÄŸlar Onur Acked-by: Thomas Mingarelli Signed-off-by: Linus Torvalds diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 2686f3e..eaa3f2a 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -140,49 +140,53 @@ static struct pci_device_id hpwdt_devices[] = { }; MODULE_DEVICE_TABLE(pci, hpwdt_devices); +extern asmlinkage void asminline_call(struct cmn_registers *pi86Regs, unsigned long *pRomEntry); + #ifndef CONFIG_X86_64 /* --32 Bit Bios------------------------------------------------------------ */ #define HPWDT_ARCH 32 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushl %ebp \n\t" - "movl %esp, %ebp \n\t" - "pusha \n\t" - "pushf \n\t" - "push %es \n\t" - "push %ds \n\t" - "pop %es \n\t" - "movl 8(%ebp),%eax \n\t" - "movl 4(%eax),%ebx \n\t" - "movl 8(%eax),%ecx \n\t" - "movl 12(%eax),%edx \n\t" - "movl 16(%eax),%esi \n\t" - "movl 20(%eax),%edi \n\t" - "movl (%eax),%eax \n\t" - "push %cs \n\t" - "call *12(%ebp) \n\t" - "pushf \n\t" - "pushl %eax \n\t" - "movl 8(%ebp),%eax \n\t" - "movl %ebx,4(%eax) \n\t" - "movl %ecx,8(%eax) \n\t" - "movl %edx,12(%eax) \n\t" - "movl %esi,16(%eax) \n\t" - "movl %edi,20(%eax) \n\t" - "movw %ds,24(%eax) \n\t" - "movw %es,26(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,(%eax) \n\t" - "popl %ebx \n\t" - "movl %ebx,28(%eax) \n\t" - "pop %es \n\t" - "popf \n\t" - "popa \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushl %ebp \n\t" + "movl %esp, %ebp \n\t" + "pusha \n\t" + "pushf \n\t" + "push %es \n\t" + "push %ds \n\t" + "pop %es \n\t" + "movl 8(%ebp),%eax \n\t" + "movl 4(%eax),%ebx \n\t" + "movl 8(%eax),%ecx \n\t" + "movl 12(%eax),%edx \n\t" + "movl 16(%eax),%esi \n\t" + "movl 20(%eax),%edi \n\t" + "movl (%eax),%eax \n\t" + "push %cs \n\t" + "call *12(%ebp) \n\t" + "pushf \n\t" + "pushl %eax \n\t" + "movl 8(%ebp),%eax \n\t" + "movl %ebx,4(%eax) \n\t" + "movl %ecx,8(%eax) \n\t" + "movl %edx,12(%eax) \n\t" + "movl %esi,16(%eax) \n\t" + "movl %edi,20(%eax) \n\t" + "movw %ds,24(%eax) \n\t" + "movw %es,26(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,(%eax) \n\t" + "popl %ebx \n\t" + "movl %ebx,28(%eax) \n\t" + "pop %es \n\t" + "popf \n\t" + "popa \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); + /* * cru_detect @@ -333,43 +337,44 @@ static int __devinit detect_cru_service(void) #define HPWDT_ARCH 64 -asmlinkage void asminline_call(struct cmn_registers *pi86Regs, - unsigned long *pRomEntry) -{ - asm("pushq %rbp \n\t" - "movq %rsp, %rbp \n\t" - "pushq %rax \n\t" - "pushq %rbx \n\t" - "pushq %rdx \n\t" - "pushq %r12 \n\t" - "pushq %r9 \n\t" - "movq %rsi, %r12 \n\t" - "movq %rdi, %r9 \n\t" - "movl 4(%r9),%ebx \n\t" - "movl 8(%r9),%ecx \n\t" - "movl 12(%r9),%edx \n\t" - "movl 16(%r9),%esi \n\t" - "movl 20(%r9),%edi \n\t" - "movl (%r9),%eax \n\t" - "call *%r12 \n\t" - "pushfq \n\t" - "popq %r12 \n\t" - "popfq \n\t" - "movl %eax, (%r9) \n\t" - "movl %ebx, 4(%r9) \n\t" - "movl %ecx, 8(%r9) \n\t" - "movl %edx, 12(%r9) \n\t" - "movl %esi, 16(%r9) \n\t" - "movl %edi, 20(%r9) \n\t" - "movq %r12, %rax \n\t" - "movl %eax, 28(%r9) \n\t" - "popq %r9 \n\t" - "popq %r12 \n\t" - "popq %rdx \n\t" - "popq %rbx \n\t" - "popq %rax \n\t" - "leave \n\t" "ret"); -} +asm(".text \n\t" + ".align 4 \n" + "asminline_call: \n\t" + "pushq %rbp \n\t" + "movq %rsp, %rbp \n\t" + "pushq %rax \n\t" + "pushq %rbx \n\t" + "pushq %rdx \n\t" + "pushq %r12 \n\t" + "pushq %r9 \n\t" + "movq %rsi, %r12 \n\t" + "movq %rdi, %r9 \n\t" + "movl 4(%r9),%ebx \n\t" + "movl 8(%r9),%ecx \n\t" + "movl 12(%r9),%edx \n\t" + "movl 16(%r9),%esi \n\t" + "movl 20(%r9),%edi \n\t" + "movl (%r9),%eax \n\t" + "call *%r12 \n\t" + "pushfq \n\t" + "popq %r12 \n\t" + "popfq \n\t" + "movl %eax, (%r9) \n\t" + "movl %ebx, 4(%r9) \n\t" + "movl %ecx, 8(%r9) \n\t" + "movl %edx, 12(%r9) \n\t" + "movl %esi, 16(%r9) \n\t" + "movl %edi, 20(%r9) \n\t" + "movq %r12, %rax \n\t" + "movl %eax, 28(%r9) \n\t" + "popq %r9 \n\t" + "popq %r12 \n\t" + "popq %rdx \n\t" + "popq %rbx \n\t" + "popq %rax \n\t" + "leave \n\t" + "ret \n\t" + ".previous"); /* * dmi_find_cru -- cgit v0.10.2 From d70ac829b7f42d7ef4f879635c6a772b0b4ed0a2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 20 Jun 2008 16:19:44 -0700 Subject: Linux 2.6.26-rc7 diff --git a/Makefile b/Makefile index 6923d66..2b4977c 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc7 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v0.10.2 From 9267b4b3880d00dc2dab90f1d817c856939114f7 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:25:39 +0400 Subject: alpha: fix module load failures on smp (bug #10926) To calculate addresses of locally defined variables, GCC uses 32-bit displacement from the GP. Which doesn't work for per cpu variables in modules, as an offset to the kernel per cpu area is way above 4G. The workaround is to force allocation of a GOT entry for per cpu variable using ldq instruction with a 'literal' relocation. I had to use custom asm/percpu.h, as a required argument magic doesn't work with asm-generic/percpu.h macros. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h index 48348fe..82e8a94 100644 --- a/include/asm-alpha/percpu.h +++ b/include/asm-alpha/percpu.h @@ -1,6 +1,76 @@ #ifndef __ALPHA_PERCPU_H #define __ALPHA_PERCPU_H +#include +#include -#include +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +#ifdef CONFIG_SMP + +/* + * per_cpu_offset() is the offset that has to be added to a + * percpu variable to get to the instance for a certain processor. + */ +extern unsigned long __per_cpu_offset[NR_CPUS]; + +#define per_cpu_offset(x) (__per_cpu_offset[x]) + +#define __my_cpu_offset per_cpu_offset(raw_smp_processor_id()) +#ifdef CONFIG_DEBUG_PREEMPT +#define my_cpu_offset per_cpu_offset(smp_processor_id()) +#else +#define my_cpu_offset __my_cpu_offset +#endif + +#ifndef MODULE +#define SHIFT_PERCPU_PTR(var, offset) RELOC_HIDE(&per_cpu_var(var), (offset)) +#define PER_CPU_ATTRIBUTES +#else +/* + * To calculate addresses of locally defined variables, GCC uses 32-bit + * displacement from the GP. Which doesn't work for per cpu variables in + * modules, as an offset to the kernel per cpu area is way above 4G. + * + * This forces allocation of a GOT entry for per cpu variable using + * ldq instruction with a 'literal' relocation. + */ +#define SHIFT_PERCPU_PTR(var, offset) ({ \ + extern int simple_identifier_##var(void); \ + unsigned long __ptr, tmp_gp; \ + asm ( "br %1, 1f \n\ + 1: ldgp %1, 0(%1) \n\ + ldq %0, per_cpu__" #var"(%1)\t!literal" \ + : "=&r"(__ptr), "=&r"(tmp_gp)); \ + (typeof(&per_cpu_var(var)))(__ptr + (offset)); }) + +#define PER_CPU_ATTRIBUTES __used + +#endif /* MODULE */ + +/* + * A percpu variable may point to a discarded regions. The following are + * established ways to produce a usable pointer from the percpu variable + * offset. + */ +#define per_cpu(var, cpu) \ + (*SHIFT_PERCPU_PTR(var, per_cpu_offset(cpu))) +#define __get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, my_cpu_offset)) +#define __raw_get_cpu_var(var) \ + (*SHIFT_PERCPU_PTR(var, __my_cpu_offset)) + +#else /* ! SMP */ + +#define per_cpu(var, cpu) (*((void)(cpu), &per_cpu_var(var))) +#define __get_cpu_var(var) per_cpu_var(var) +#define __raw_get_cpu_var(var) per_cpu_var(var) + +#endif /* SMP */ + +#define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) #endif /* __ALPHA_PERCPU_H */ -- cgit v0.10.2 From ede426923b25414f5ec9c00fefe6727d9721dd13 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:26:21 +0400 Subject: alpha: link failure fix With built-in scsi disk driver, the final link fails with a following error: `.exit.text' referenced in section `.rodata' of drivers/built-in.o: defined in discarded section `.exit.text' of drivers/built-in.o This happens with -Os (CONFIG_CC_OPTIMIZE_FOR_SIZE=y) with all gcc-4 versions, and also with -O2 and gcc-4.3. The problem is in sd.c:sd_major() being inlined into __exit function exit_sd(), and the compiler generating a jump table in .rodata section for the 'switch' statement in sd_major(). So we have references to discarded section. Fixed with a big hammer in the form of -fno-jump-tables. Note that jump tables vs. discarded sections is a generic problem, other architectures are just lucky not to suffer from it. But with a slightly more complex switch/case statement it can be reproduced on x86 as well. So maybe at some point we should consider -fno-jump-tables as a generic compile option... Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/arch/alpha/Makefile b/arch/alpha/Makefile index 4e1a8e2..4759fe7 100644 --- a/arch/alpha/Makefile +++ b/arch/alpha/Makefile @@ -13,6 +13,7 @@ NM := $(NM) -B LDFLAGS_vmlinux := -static -N #-relax CHECKFLAGS += -D__alpha__ -m64 cflags-y := -pipe -mno-fp-regs -ffixed-8 -msmall-data +cflags-y += $(call cc-option, -fno-jump-tables) cpuflags-$(CONFIG_ALPHA_EV4) := -mcpu=ev4 cpuflags-$(CONFIG_ALPHA_EV5) := -mcpu=ev5 -- cgit v0.10.2 From d559d4a24a3fed75bd890abcc1f95cd8d8dad6e1 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:28:31 +0400 Subject: alpha: fix compile failures with gcc-4.3 (bug #10438) Vast majority of these build failures are gcc-4.3 warnings about static functions and objects being referenced from non-static (read: "extern inline") functions, in conjunction with our -Werror. We cannot just convert "extern inline" to "static inline", as people keep suggesting all the time, because "extern inline" logic is crucial for generic kernel build. So - just make sure that all callees of critical "extern inline" functions are also "extern inline"; - use "static inline", wherever it's possible. traps.c: work around gcc-4.3 being too smart about array bounds-checking. TODO: add "gnu_inline" attribute to all our "extern inline" functions to ensure desired behaviour with future compilers. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/core_t2.c b/arch/alpha/kernel/core_t2.c index c075029..d9980d4 100644 --- a/arch/alpha/kernel/core_t2.c +++ b/arch/alpha/kernel/core_t2.c @@ -74,6 +74,8 @@ # define DBG(args) #endif +DEFINE_SPINLOCK(t2_hae_lock); + static volatile unsigned int t2_mcheck_any_expected; static volatile unsigned int t2_mcheck_last_taken; diff --git a/arch/alpha/kernel/traps.c b/arch/alpha/kernel/traps.c index dc57790..c778779 100644 --- a/arch/alpha/kernel/traps.c +++ b/arch/alpha/kernel/traps.c @@ -447,7 +447,7 @@ struct unaligned_stat { /* Macro for exception fixup code to access integer registers. */ -#define una_reg(r) (regs->regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) +#define una_reg(r) (_regs[(r) >= 16 && (r) <= 18 ? (r)+19 : (r)]) asmlinkage void @@ -456,6 +456,7 @@ do_entUna(void * va, unsigned long opcode, unsigned long reg, { long error, tmp1, tmp2, tmp3, tmp4; unsigned long pc = regs->pc - 4; + unsigned long *_regs = regs->regs; const struct exception_table_entry *fixup; unaligned[0].count++; diff --git a/include/asm-alpha/core_mcpcia.h b/include/asm-alpha/core_mcpcia.h index 525b4f6..acf55b4 100644 --- a/include/asm-alpha/core_mcpcia.h +++ b/include/asm-alpha/core_mcpcia.h @@ -261,7 +261,7 @@ struct el_MCPCIA_uncorrected_frame_mcheck { } #endif -static inline int __mcpcia_is_mmio(unsigned long addr) +extern inline int __mcpcia_is_mmio(unsigned long addr) { return (addr & 0x80000000UL) == 0; } diff --git a/include/asm-alpha/core_t2.h b/include/asm-alpha/core_t2.h index 90e6b5d..46bfff5 100644 --- a/include/asm-alpha/core_t2.h +++ b/include/asm-alpha/core_t2.h @@ -356,13 +356,13 @@ struct el_t2_frame_corrected { #define vip volatile int * #define vuip volatile unsigned int * -static inline u8 t2_inb(unsigned long addr) +extern inline u8 t2_inb(unsigned long addr) { long result = *(vip) ((addr << 5) + T2_IO + 0x00); return __kernel_extbl(result, addr & 3); } -static inline void t2_outb(u8 b, unsigned long addr) +extern inline void t2_outb(u8 b, unsigned long addr) { unsigned long w; @@ -371,13 +371,13 @@ static inline void t2_outb(u8 b, unsigned long addr) mb(); } -static inline u16 t2_inw(unsigned long addr) +extern inline u16 t2_inw(unsigned long addr) { long result = *(vip) ((addr << 5) + T2_IO + 0x08); return __kernel_extwl(result, addr & 3); } -static inline void t2_outw(u16 b, unsigned long addr) +extern inline void t2_outw(u16 b, unsigned long addr) { unsigned long w; @@ -386,12 +386,12 @@ static inline void t2_outw(u16 b, unsigned long addr) mb(); } -static inline u32 t2_inl(unsigned long addr) +extern inline u32 t2_inl(unsigned long addr) { return *(vuip) ((addr << 5) + T2_IO + 0x18); } -static inline void t2_outl(u32 b, unsigned long addr) +extern inline void t2_outl(u32 b, unsigned long addr) { *(vuip) ((addr << 5) + T2_IO + 0x18) = b; mb(); @@ -435,7 +435,7 @@ static inline void t2_outl(u32 b, unsigned long addr) set_hae(msb); \ } -static DEFINE_SPINLOCK(t2_hae_lock); +extern spinlock_t t2_hae_lock; /* * NOTE: take T2_DENSE_MEM off in each readX/writeX routine, since diff --git a/include/asm-alpha/io.h b/include/asm-alpha/io.h index 38f18cf..e971ab0 100644 --- a/include/asm-alpha/io.h +++ b/include/asm-alpha/io.h @@ -35,7 +35,7 @@ * register not being up-to-date with respect to the hardware * value. */ -static inline void __set_hae(unsigned long new_hae) +extern inline void __set_hae(unsigned long new_hae) { unsigned long flags; local_irq_save(flags); @@ -49,7 +49,7 @@ static inline void __set_hae(unsigned long new_hae) local_irq_restore(flags); } -static inline void set_hae(unsigned long new_hae) +extern inline void set_hae(unsigned long new_hae) { if (new_hae != alpha_mv.hae_cache) __set_hae(new_hae); @@ -176,7 +176,7 @@ REMAP2(u64, writeq, volatile) #undef REMAP1 #undef REMAP2 -static inline void __iomem *generic_ioportmap(unsigned long a) +extern inline void __iomem *generic_ioportmap(unsigned long a) { return alpha_mv.mv_ioportmap(a); } diff --git a/include/asm-alpha/mmu_context.h b/include/asm-alpha/mmu_context.h index 6a5be1f..86c08a0 100644 --- a/include/asm-alpha/mmu_context.h +++ b/include/asm-alpha/mmu_context.h @@ -23,7 +23,7 @@ #endif -extern inline unsigned long +static inline unsigned long __reload_thread(struct pcb_struct *pcb) { register unsigned long a0 __asm__("$16"); @@ -114,7 +114,7 @@ extern unsigned long last_asn; #define __MMU_EXTERN_INLINE #endif -static inline unsigned long +extern inline unsigned long __get_new_mm_context(struct mm_struct *mm, long cpu) { unsigned long asn = cpu_last_asn(cpu); @@ -226,7 +226,7 @@ ev4_activate_mm(struct mm_struct *prev_mm, struct mm_struct *next_mm) # endif #endif -extern inline int +static inline int init_new_context(struct task_struct *tsk, struct mm_struct *mm) { int i; diff --git a/include/asm-alpha/system.h b/include/asm-alpha/system.h index ed221d6..afe20fa 100644 --- a/include/asm-alpha/system.h +++ b/include/asm-alpha/system.h @@ -184,7 +184,7 @@ enum amask_enum { __amask; }) #define __CALL_PAL_R0(NAME, TYPE) \ -static inline TYPE NAME(void) \ +extern inline TYPE NAME(void) \ { \ register TYPE __r0 __asm__("$0"); \ __asm__ __volatile__( \ @@ -196,7 +196,7 @@ static inline TYPE NAME(void) \ } #define __CALL_PAL_W1(NAME, TYPE0) \ -static inline void NAME(TYPE0 arg0) \ +extern inline void NAME(TYPE0 arg0) \ { \ register TYPE0 __r16 __asm__("$16") = arg0; \ __asm__ __volatile__( \ @@ -207,7 +207,7 @@ static inline void NAME(TYPE0 arg0) \ } #define __CALL_PAL_W2(NAME, TYPE0, TYPE1) \ -static inline void NAME(TYPE0 arg0, TYPE1 arg1) \ +extern inline void NAME(TYPE0 arg0, TYPE1 arg1) \ { \ register TYPE0 __r16 __asm__("$16") = arg0; \ register TYPE1 __r17 __asm__("$17") = arg1; \ @@ -219,7 +219,7 @@ static inline void NAME(TYPE0 arg0, TYPE1 arg1) \ } #define __CALL_PAL_RW1(NAME, RTYPE, TYPE0) \ -static inline RTYPE NAME(TYPE0 arg0) \ +extern inline RTYPE NAME(TYPE0 arg0) \ { \ register RTYPE __r0 __asm__("$0"); \ register TYPE0 __r16 __asm__("$16") = arg0; \ @@ -232,7 +232,7 @@ static inline RTYPE NAME(TYPE0 arg0) \ } #define __CALL_PAL_RW2(NAME, RTYPE, TYPE0, TYPE1) \ -static inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \ +extern inline RTYPE NAME(TYPE0 arg0, TYPE1 arg1) \ { \ register RTYPE __r0 __asm__("$0"); \ register TYPE0 __r16 __asm__("$16") = arg0; \ diff --git a/include/asm-alpha/vga.h b/include/asm-alpha/vga.h index e8df1e7..c00106b 100644 --- a/include/asm-alpha/vga.h +++ b/include/asm-alpha/vga.h @@ -13,7 +13,7 @@ #define VT_BUF_HAVE_MEMSETW #define VT_BUF_HAVE_MEMCPYW -extern inline void scr_writew(u16 val, volatile u16 *addr) +static inline void scr_writew(u16 val, volatile u16 *addr) { if (__is_ioaddr(addr)) __raw_writew(val, (volatile u16 __iomem *) addr); @@ -21,7 +21,7 @@ extern inline void scr_writew(u16 val, volatile u16 *addr) *addr = val; } -extern inline u16 scr_readw(volatile const u16 *addr) +static inline u16 scr_readw(volatile const u16 *addr) { if (__is_ioaddr(addr)) return __raw_readw((volatile const u16 __iomem *) addr); @@ -29,7 +29,7 @@ extern inline u16 scr_readw(volatile const u16 *addr) return *addr; } -extern inline void scr_memsetw(u16 *s, u16 c, unsigned int count) +static inline void scr_memsetw(u16 *s, u16 c, unsigned int count) { if (__is_ioaddr(s)) memsetw_io((u16 __iomem *) s, c, count); -- cgit v0.10.2 From a744e0160ac5804b763449aa34d3991dc21af0be Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Sat, 21 Jun 2008 03:28:54 +0400 Subject: alpha: resurrect Cypress IDE quirk Which was removed in the hope that generic legacy IDE quirk in drivers/pci/probe.c is sufficient for Cypress IDE. It isn't, as this controller has non-standard BAR layout: secondary channel registers are in the BAR0-1 of the second PCI function - not in the BAR2-3 of the same function, as the generic quirk routine assumes. Signed-off-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/pci.c b/arch/alpha/kernel/pci.c index 36ab22a..5cf45fc 100644 --- a/arch/alpha/kernel/pci.c +++ b/arch/alpha/kernel/pci.c @@ -71,6 +71,23 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82378, quirk_i static void __init quirk_cypress(struct pci_dev *dev) { + /* The Notorious Cy82C693 chip. */ + + /* The generic legacy mode IDE fixup in drivers/pci/probe.c + doesn't work correctly with the Cypress IDE controller as + it has non-standard register layout. Fix that. */ + if (dev->class >> 8 == PCI_CLASS_STORAGE_IDE) { + dev->resource[2].start = dev->resource[3].start = 0; + dev->resource[2].end = dev->resource[3].end = 0; + dev->resource[2].flags = dev->resource[3].flags = 0; + if (PCI_FUNC(dev->devfn) == 2) { + dev->resource[0].start = 0x170; + dev->resource[0].end = 0x177; + dev->resource[1].start = 0x376; + dev->resource[1].end = 0x376; + } + } + /* The Cypress bridge responds on the PCI bus in the address range 0xffff0000-0xffffffff (conventional x86 BIOS ROM). There is no way to turn this off. The bridge also supports several extended -- cgit v0.10.2 From 2645a3c3761ac25498db2e627271016c849c68e1 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 20 Jun 2008 21:58:02 -0700 Subject: pppoe: warning fix Fix warning: drivers/net/pppoe.c: In function 'pppoe_recvmsg': drivers/net/pppoe.c:945: warning: comparison of distinct pointer types lacks a cast because skb->len is unsigned int and total_len is size_t Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/drivers/net/pppoe.c b/drivers/net/pppoe.c index bafb69b..fc6f4b8 100644 --- a/drivers/net/pppoe.c +++ b/drivers/net/pppoe.c @@ -942,7 +942,7 @@ static int pppoe_recvmsg(struct kiocb *iocb, struct socket *sock, m->msg_namelen = 0; if (skb) { - total_len = min(total_len, skb->len); + total_len = min_t(size_t, total_len, skb->len); error = skb_copy_datagram_iovec(skb, 0, m->msg_iov, total_len); if (error == 0) error = total_len; -- cgit v0.10.2 From 735ce972fbc8a65fb17788debd7bbe7b4383cc62 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Fri, 20 Jun 2008 22:04:34 -0700 Subject: sctp: Make sure N * sizeof(union sctp_addr) does not overflow. As noticed by Gabriel Campana, the kmalloc() length arg passed in by sctp_getsockopt_local_addrs_old() can overflow if ->addr_num is large enough. Therefore, enforce an appropriate limit. Signed-off-by: David S. Miller diff --git a/net/sctp/socket.c b/net/sctp/socket.c index e7e3baf..0dbcde6 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -4401,7 +4401,9 @@ static int sctp_getsockopt_local_addrs_old(struct sock *sk, int len, if (copy_from_user(&getaddrs, optval, len)) return -EFAULT; - if (getaddrs.addr_num <= 0) return -EINVAL; + if (getaddrs.addr_num <= 0 || + getaddrs.addr_num >= (INT_MAX / sizeof(union sctp_addr))) + return -EINVAL; /* * For UDP-style sockets, id specifies the association to query. * If the id field is set to the value '0' then the locally bound -- cgit v0.10.2 From b9f75f45a6b46a0ab4eb0857d437a0845871f314 Mon Sep 17 00:00:00 2001 From: "Eric W. Biederman" Date: Fri, 20 Jun 2008 22:16:51 -0700 Subject: netns: Don't receive new packets in a dead network namespace. Alexey Dobriyan writes: > Subject: ICMP sockets destruction vs ICMP packets oops > After icmp_sk_exit() nuked ICMP sockets, we get an interrupt. > icmp_reply() wants ICMP socket. > > Steps to reproduce: > > launch shell in new netns > move real NIC to netns > setup routing > ping -i 0 > exit from shell > > BUG: unable to handle kernel NULL pointer dereference at 0000000000000000 > IP: [] icmp_sk+0x17/0x30 > PGD 17f3cd067 PUD 17f3ce067 PMD 0 > Oops: 0000 [1] PREEMPT SMP DEBUG_PAGEALLOC > CPU 0 > Modules linked in: usblp usbcore > Pid: 0, comm: swapper Not tainted 2.6.26-rc6-netns-ct #4 > RIP: 0010:[] [] icmp_sk+0x17/0x30 > RSP: 0018:ffffffff8057fc30 EFLAGS: 00010286 > RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffff81017c7db900 > RDX: 0000000000000034 RSI: ffff81017c7db900 RDI: ffff81017dc41800 > RBP: ffffffff8057fc40 R08: 0000000000000001 R09: 000000000000a815 > R10: 0000000000000000 R11: 0000000000000001 R12: ffffffff8057fd28 > R13: ffffffff8057fd00 R14: ffff81017c7db938 R15: ffff81017dc41800 > FS: 0000000000000000(0000) GS:ffffffff80525000(0000) knlGS:0000000000000000 > CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b > CR2: 0000000000000000 CR3: 000000017fcda000 CR4: 00000000000006e0 > DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 > DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 > Process swapper (pid: 0, threadinfo ffffffff8053a000, task ffffffff804fa4a0) > Stack: 0000000000000000 ffff81017c7db900 ffffffff8057fcf0 ffffffff803fcfe4 > ffffffff804faa38 0000000000000246 0000000000005a40 0000000000000246 > 000000000001ffff ffff81017dd68dc0 0000000000005a40 0000000055342436 > Call Trace: > [] icmp_reply+0x44/0x1e0 > [] ? ip_route_input+0x23a/0x1360 > [] icmp_echo+0x65/0x70 > [] icmp_rcv+0x180/0x1b0 > [] ip_local_deliver+0xf4/0x1f0 > [] ip_rcv+0x33b/0x650 > [] netif_receive_skb+0x27a/0x340 > [] process_backlog+0x9d/0x100 > [] net_rx_action+0x18d/0x250 > [] __do_softirq+0x75/0x100 > [] call_softirq+0x1c/0x30 > [] do_softirq+0x65/0xa0 > [] irq_exit+0x97/0xa0 > [] do_IRQ+0xa8/0x130 > [] ? mwait_idle+0x0/0x60 > [] ret_from_intr+0x0/0xf > [] ? mwait_idle+0x4c/0x60 > [] ? mwait_idle+0x43/0x60 > [] ? cpu_idle+0x57/0xa0 > [] ? rest_init+0x70/0x80 > Code: 10 5b 41 5c 41 5d 41 5e c9 c3 66 2e 0f 1f 84 00 00 00 00 00 55 48 89 e5 53 > 48 83 ec 08 48 8b 9f 78 01 00 00 e8 2b c7 f1 ff 89 c0 <48> 8b 04 c3 48 83 c4 08 > 5b c9 c3 66 66 66 66 66 2e 0f 1f 84 00 > RIP [] icmp_sk+0x17/0x30 > RSP > CR2: 0000000000000000 > ---[ end trace ea161157b76b33e8 ]--- > Kernel panic - not syncing: Aiee, killing interrupt handler! Receiving packets while we are cleaning up a network namespace is a racy proposition. It is possible when the packet arrives that we have removed some but not all of the state we need to fully process it. We have the choice of either playing wack-a-mole with the cleanup routines or simply dropping packets when we don't have a network namespace to handle them. Since the check looks inexpensive in netif_receive_skb let's just drop the incoming packets. Signed-off-by: Eric W. Biederman Signed-off-by: David S. Miller diff --git a/include/net/net_namespace.h b/include/net/net_namespace.h index aa540e6..d9dd0f7 100644 --- a/include/net/net_namespace.h +++ b/include/net/net_namespace.h @@ -95,6 +95,11 @@ extern struct list_head net_namespace_list; #ifdef CONFIG_NET_NS extern void __put_net(struct net *net); +static inline int net_alive(struct net *net) +{ + return net && atomic_read(&net->count); +} + static inline struct net *get_net(struct net *net) { atomic_inc(&net->count); @@ -125,6 +130,12 @@ int net_eq(const struct net *net1, const struct net *net2) return net1 == net2; } #else + +static inline int net_alive(struct net *net) +{ + return 1; +} + static inline struct net *get_net(struct net *net) { return net; diff --git a/net/core/dev.c b/net/core/dev.c index 68d8df0..c421a1f 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2077,6 +2077,10 @@ int netif_receive_skb(struct sk_buff *skb) rcu_read_lock(); + /* Don't receive packets in an exiting network namespace */ + if (!net_alive(dev_net(skb->dev))) + goto out; + #ifdef CONFIG_NET_CLS_ACT if (skb->tc_verd & TC_NCLS) { skb->tc_verd = CLR_TC_NCLS(skb->tc_verd); diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 72b4c18..7c52fe2 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -140,6 +140,9 @@ static void cleanup_net(struct work_struct *work) struct pernet_operations *ops; struct net *net; + /* Be very certain incoming network packets will not find us */ + rcu_barrier(); + net = container_of(work, struct net, work); mutex_lock(&net_mutex); -- cgit v0.10.2 From 71c2742f5e6348d76ee62085cf0a13e5eff0f00e Mon Sep 17 00:00:00 2001 From: Bernhard Walle Date: Sat, 21 Jun 2008 19:01:02 +0200 Subject: Add return value to reserve_bootmem_node() This patch changes the function reserve_bootmem_node() from void to int, returning -ENOMEM if the allocation fails. This fixes a build problem on x86 with CONFIG_KEXEC=y and CONFIG_NEED_MULTIPLE_NODES=y Signed-off-by: Bernhard Walle Reported-by: Adrian Bunk Signed-off-by: Linus Torvalds diff --git a/include/linux/bootmem.h b/include/linux/bootmem.h index 6a5dbdc..686895b 100644 --- a/include/linux/bootmem.h +++ b/include/linux/bootmem.h @@ -94,7 +94,7 @@ extern unsigned long init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn, unsigned long startpfn, unsigned long endpfn); -extern void reserve_bootmem_node(pg_data_t *pgdat, +extern int reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, unsigned long size, int flags); diff --git a/mm/bootmem.c b/mm/bootmem.c index e8fb927..8d9f60e 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -442,15 +442,17 @@ unsigned long __init init_bootmem_node(pg_data_t *pgdat, unsigned long freepfn, return init_bootmem_core(pgdat, freepfn, startpfn, endpfn); } -void __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, +int __init reserve_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, unsigned long size, int flags) { int ret; ret = can_reserve_bootmem_core(pgdat->bdata, physaddr, size, flags); if (ret < 0) - return; + return -ENOMEM; reserve_bootmem_core(pgdat->bdata, physaddr, size, flags); + + return 0; } void __init free_bootmem_node(pg_data_t *pgdat, unsigned long physaddr, -- cgit v0.10.2 From 481c5346d0981940ee63037eb53e4e37b0735c10 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Sat, 21 Jun 2008 16:46:35 -0700 Subject: Slab: Fix memory leak in fallback_alloc() The zonelist patches caused the loop that checks for available objects in permitted zones to not terminate immediately. One object per zone per allocation may be allocated and then abandoned. Break the loop when we have successfully allocated one object. Signed-off-by: Christoph Lameter Signed-off-by: Linus Torvalds diff --git a/mm/slab.c b/mm/slab.c index 06236e4..046607f 100644 --- a/mm/slab.c +++ b/mm/slab.c @@ -3263,9 +3263,12 @@ retry: if (cpuset_zone_allowed_hardwall(zone, flags) && cache->nodelists[nid] && - cache->nodelists[nid]->free_objects) + cache->nodelists[nid]->free_objects) { obj = ____cache_alloc_node(cache, flags | GFP_THISNODE, nid); + if (obj) + break; + } } if (!obj) { -- cgit v0.10.2 From f1edfc420ac7beb90b27bf822036cbbfa32483f1 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 22 Jun 2008 04:27:25 +0100 Subject: [ARM] 5115/1: pxafb: fix ifdef for command line option handling This bug was found and fixed by Lothar Wassmann. Previously, the use of ifndef CONFIG_MODULES made it such that pxafb command line option parsing was dependent on whether the kernel was built with module support. The ifndef should be MODULE so that parsing is dependent only on whether the driver is built-in or not. Signed-off-by: Jaya Kumar Acked-by: Krzysztof Helt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 7dcda18..eb23d19 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1588,7 +1588,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options) static char g_options[256] __devinitdata = ""; -#ifndef CONFIG_MODULES +#ifndef MODULE static int __devinit pxafb_setup_options(void) { char *options = NULL; -- cgit v0.10.2 From ee98476bbc565f8fe42e198602e647288b6a258d Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 22 Jun 2008 04:27:26 +0100 Subject: [ARM] 5116/1: pxafb: cleanup and fix order of failure handling This issue was found by Krzysztof Helt and Eric Miao. pxafb had issues in the order with which it cleaned up if errors occurred during a probe. This patch reorders the failure handling sequence and also frees the cmap and clk. Signed-off-by: Jaya Kumar Acked-by: Krzysztof Helt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index eb23d19..796e0d1 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1685,14 +1685,14 @@ static int __init pxafb_probe(struct platform_device *dev) if (r == NULL) { dev_err(&dev->dev, "no I/O memory resource defined\n"); ret = -ENODEV; - goto failed; + goto failed_fbi; } r = request_mem_region(r->start, r->end - r->start + 1, dev->name); if (r == NULL) { dev_err(&dev->dev, "failed to request I/O memory\n"); ret = -EBUSY; - goto failed; + goto failed_fbi; } fbi->mmio_base = ioremap(r->start, r->end - r->start + 1); @@ -1735,8 +1735,17 @@ static int __init pxafb_probe(struct platform_device *dev) * This makes sure that our colour bitfield * descriptors are correctly initialised. */ - pxafb_check_var(&fbi->fb.var, &fbi->fb); - pxafb_set_par(&fbi->fb); + ret = pxafb_check_var(&fbi->fb.var, &fbi->fb); + if (ret) { + dev_err(&dev->dev, "failed to get suitable mode\n"); + goto failed_free_irq; + } + + ret = pxafb_set_par(&fbi->fb); + if (ret) { + dev_err(&dev->dev, "Failed to set parameters\n"); + goto failed_free_irq; + } platform_set_drvdata(dev, fbi); @@ -1744,7 +1753,7 @@ static int __init pxafb_probe(struct platform_device *dev) if (ret < 0) { dev_err(&dev->dev, "Failed to register framebuffer device: %d\n", ret); - goto failed_free_irq; + goto failed_free_cmap; } #ifdef CONFIG_CPU_FREQ @@ -1763,18 +1772,23 @@ static int __init pxafb_probe(struct platform_device *dev) return 0; +failed_free_cmap: + if (fbi->fb.cmap.len) + fb_dealloc_cmap(&fbi->fb.cmap); failed_free_irq: free_irq(irq, fbi); -failed_free_res: - release_mem_region(r->start, r->end - r->start + 1); -failed_free_io: - iounmap(fbi->mmio_base); failed_free_mem: dma_free_writecombine(&dev->dev, fbi->map_size, fbi->map_cpu, fbi->map_dma); -failed: +failed_free_io: + iounmap(fbi->mmio_base); +failed_free_res: + release_mem_region(r->start, r->end - r->start + 1); +failed_fbi: + clk_put(fbi->clk); platform_set_drvdata(dev, NULL); kfree(fbi); +failed: return ret; } -- cgit v0.10.2 From e5a2c9ccb3e849fed70674ac6880536eaf553dba Mon Sep 17 00:00:00 2001 From: Uli Luckas Date: Wed, 18 Jun 2008 09:54:03 +0100 Subject: [ARM] 5109/1: Mark rtc sa1100 driver as wakeup source before registering it Mark rtc sa1100 driver as wakeup source before registering it. rtc_device_register evaluates device_can_wakeup(rtc->dev.parent) and supresses the creation of /sys/class/rtc/rtcX/wakealarm if device_can_wakeup is not (yet) true. Signed-off-by: Uli Luckas Signed-off-by: Russell King diff --git a/drivers/rtc/rtc-sa1100.c b/drivers/rtc/rtc-sa1100.c index 82f62d2..67421b0d 100644 --- a/drivers/rtc/rtc-sa1100.c +++ b/drivers/rtc/rtc-sa1100.c @@ -331,14 +331,14 @@ static int sa1100_rtc_probe(struct platform_device *pdev) RCNR = 0; } + device_init_wakeup(&pdev->dev, 1); + rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) return PTR_ERR(rtc); - device_init_wakeup(&pdev->dev, 1); - platform_set_drvdata(pdev, rtc); return 0; -- cgit v0.10.2 From fc6e14f4fb50bc734d08e65eb8a5798d54a2ad77 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 22 Jun 2008 15:41:30 +0100 Subject: [ARM] Export dma_sync_sg_for_device() Noticed by Martin Michlmayr, this missing export prevents IEEE1394 from building with: ERROR: "dma_sync_sg_for_device" [drivers/ieee1394/ieee1394.ko] undefined! Signed-off-by: Russell King diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 52fc6a8..2744673 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -650,7 +650,8 @@ EXPORT_SYMBOL(dma_map_sg); EXPORT_SYMBOL(dma_unmap_sg); EXPORT_SYMBOL(dma_sync_single_for_cpu); EXPORT_SYMBOL(dma_sync_single_for_device); -EXPORT_SYMBOL(dma_sync_sg); +EXPORT_SYMBOL(dma_sync_sg_for_cpu); +EXPORT_SYMBOL(dma_sync_sg_for_device); EXPORT_SYMBOL(dmabounce_register_dev); EXPORT_SYMBOL(dmabounce_unregister_dev); -- cgit v0.10.2 From 55d8538498f62ec72b5ba67aa386c7726f630475 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sun, 22 Jun 2008 12:23:15 -0700 Subject: Fix performance regression on lmbench select benchmark Christian Borntraeger reported that reinstating cond_resched() with CONFIG_PREEMPT caused a performance regression on lmbench: For example select file 500: 23 microseconds 32 microseconds and that's really because we totally unnecessarily do the cond_resched() in the innermost loop of select(), which is just silly. This moves it out from the innermost loop (which only ever loops ove the bits in a single "unsigned long" anyway), which makes the performance regression go away. Reported-and-tested-by: Christian Borntraeger Signed-off-by: Linus Torvalds diff --git a/fs/select.c b/fs/select.c index 8dda969..da0e882 100644 --- a/fs/select.c +++ b/fs/select.c @@ -249,7 +249,6 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout) retval++; } } - cond_resched(); } if (res_in) *rinp = res_in; @@ -257,6 +256,7 @@ int do_select(int n, fd_set_bits *fds, s64 *timeout) *routp = res_out; if (res_ex) *rexp = res_ex; + cond_resched(); } wait = NULL; if (retval || !*timeout || signal_pending(current)) -- cgit v0.10.2 From 44e051773da465f8c92127914bc784770e0e2a28 Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Jun 2008 11:54:05 +0200 Subject: ALSA: aw2 - Fix Oops at initialization The irq handler may be called before the proper initialization of hardware. Call snd_aw2_saa7146_setup() before the irq handler registration. Signed-off-by: Takashi Iwai diff --git a/sound/pci/aw2/aw2-alsa.c b/sound/pci/aw2/aw2-alsa.c index 56f87cd..3f00ddf 100644 --- a/sound/pci/aw2/aw2-alsa.c +++ b/sound/pci/aw2/aw2-alsa.c @@ -316,6 +316,8 @@ static int __devinit snd_aw2_create(struct snd_card *card, return -ENOMEM; } + /* (2) initialization of the chip hardware */ + snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt); if (request_irq(pci->irq, snd_aw2_saa7146_interrupt, IRQF_SHARED, "Audiowerk2", chip)) { @@ -329,8 +331,6 @@ static int __devinit snd_aw2_create(struct snd_card *card, } chip->irq = pci->irq; - /* (2) initialization of the chip hardware */ - snd_aw2_saa7146_setup(&chip->saa7146, chip->iobase_virt); err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, chip, &ops); if (err < 0) { free_irq(chip->irq, (void *)chip); -- cgit v0.10.2 From 3e14b50dd4a3178f4f635267a2706b5d4f8c61ee Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 23 Jun 2008 11:58:06 +0200 Subject: ALSA: sb - Fix wrong assertions snd_assert() in save_mixer() and restore_mixer() in sb_mixer.c is just wrong. The debug code wasn't tested at all, obviously... Signed-off-by: Takashi Iwai diff --git a/sound/isa/sb/sb_mixer.c b/sound/isa/sb/sb_mixer.c index 91d1422..73d4572 100644 --- a/sound/isa/sb/sb_mixer.c +++ b/sound/isa/sb/sb_mixer.c @@ -925,7 +925,7 @@ static unsigned char als4000_saved_regs[] = { static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs) { unsigned char *val = chip->saved_regs; - snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return); + snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return); for (; num_regs; num_regs--) *val++ = snd_sbmixer_read(chip, *regs++); } @@ -933,7 +933,7 @@ static void save_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs) static void restore_mixer(struct snd_sb *chip, unsigned char *regs, int num_regs) { unsigned char *val = chip->saved_regs; - snd_assert(num_regs > ARRAY_SIZE(chip->saved_regs), return); + snd_assert(num_regs <= ARRAY_SIZE(chip->saved_regs), return); for (; num_regs; num_regs--) snd_sbmixer_write(chip, *regs++, *val++); } -- cgit v0.10.2 From 1b7558e457ed0de61023cfc913d2c342c7c3d9f2 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Mon, 23 Jun 2008 11:21:58 +0200 Subject: futexes: fix fault handling in futex_lock_pi This patch addresses a very sporadic pi-futex related failure in highly threaded java apps on large SMP systems. David Holmes reported that the pi_state consistency check in lookup_pi_state triggered with his test application. This means that the kernel internal pi_state and the user space futex variable are out of sync. First we assumed that this is a user space data corruption, but deeper investigation revieled that the problem happend because the pi-futex code is not handling a fault in the futex_lock_pi path when the user space variable needs to be fixed up. The fault happens when a fork mapped the anon memory which contains the futex readonly for COW or the page got swapped out exactly between the unlock of the futex and the return of either the new futex owner or the task which was the expected owner but failed to acquire the kernel internal rtmutex. The current futex_lock_pi() code drops out with an inconsistent in case it faults and returns -EFAULT to user space. User space has no way to fixup that state. When we wrote this code we thought that we could not drop the hash bucket lock at this point to handle the fault. After analysing the code again it turned out to be wrong because there are only two tasks involved which might modify the pi_state and the user space variable: - the task which acquired the rtmutex - the pending owner of the pi_state which did not get the rtmutex Both tasks drop into the fixup_pi_state() function before returning to user space. The first task which acquired the hash bucket lock faults in the fixup of the user space variable, drops the spinlock and calls futex_handle_fault() to fault in the page. Now the second task could acquire the hash bucket lock and tries to fixup the user space variable as well. It either faults as well or it succeeds because the first task already faulted the page in. One caveat is to avoid a double fixup. After returning from the fault handling we reacquire the hash bucket lock and check whether the pi_state owner has been modified already. Reported-by: David Holmes Signed-off-by: Thomas Gleixner Cc: Andrew Morton Cc: David Holmes Cc: Peter Zijlstra Cc: Linus Torvalds Cc: Peter Zijlstra Cc: Signed-off-by: Ingo Molnar kernel/futex.c | 93 ++++++++++++++++++++++++++++++++++++++++++++------------- 1 file changed, 73 insertions(+), 20 deletions(-) diff --git a/kernel/futex.c b/kernel/futex.c index 449def8..7d1136e 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -1096,21 +1096,64 @@ static void unqueue_me_pi(struct futex_q *q) * private futexes. */ static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q, - struct task_struct *newowner) + struct task_struct *newowner, + struct rw_semaphore *fshared) { u32 newtid = task_pid_vnr(newowner) | FUTEX_WAITERS; struct futex_pi_state *pi_state = q->pi_state; + struct task_struct *oldowner = pi_state->owner; u32 uval, curval, newval; - int ret; + int ret, attempt = 0; /* Owner died? */ + if (!pi_state->owner) + newtid |= FUTEX_OWNER_DIED; + + /* + * We are here either because we stole the rtmutex from the + * pending owner or we are the pending owner which failed to + * get the rtmutex. We have to replace the pending owner TID + * in the user space variable. This must be atomic as we have + * to preserve the owner died bit here. + * + * Note: We write the user space value _before_ changing the + * pi_state because we can fault here. Imagine swapped out + * pages or a fork, which was running right before we acquired + * mmap_sem, that marked all the anonymous memory readonly for + * cow. + * + * Modifying pi_state _before_ the user space value would + * leave the pi_state in an inconsistent state when we fault + * here, because we need to drop the hash bucket lock to + * handle the fault. This might be observed in the PID check + * in lookup_pi_state. + */ +retry: + if (get_futex_value_locked(&uval, uaddr)) + goto handle_fault; + + while (1) { + newval = (uval & FUTEX_OWNER_DIED) | newtid; + + curval = cmpxchg_futex_value_locked(uaddr, uval, newval); + + if (curval == -EFAULT) + goto handle_fault; + if (curval == uval) + break; + uval = curval; + } + + /* + * We fixed up user space. Now we need to fix the pi_state + * itself. + */ if (pi_state->owner != NULL) { spin_lock_irq(&pi_state->owner->pi_lock); WARN_ON(list_empty(&pi_state->list)); list_del_init(&pi_state->list); spin_unlock_irq(&pi_state->owner->pi_lock); - } else - newtid |= FUTEX_OWNER_DIED; + } pi_state->owner = newowner; @@ -1118,26 +1161,35 @@ static int fixup_pi_state_owner(u32 __user *uaddr, struct futex_q *q, WARN_ON(!list_empty(&pi_state->list)); list_add(&pi_state->list, &newowner->pi_state_list); spin_unlock_irq(&newowner->pi_lock); + return 0; /* - * We own it, so we have to replace the pending owner - * TID. This must be atomic as we have preserve the - * owner died bit here. + * To handle the page fault we need to drop the hash bucket + * lock here. That gives the other task (either the pending + * owner itself or the task which stole the rtmutex) the + * chance to try the fixup of the pi_state. So once we are + * back from handling the fault we need to check the pi_state + * after reacquiring the hash bucket lock and before trying to + * do another fixup. When the fixup has been done already we + * simply return. */ - ret = get_futex_value_locked(&uval, uaddr); +handle_fault: + spin_unlock(q->lock_ptr); - while (!ret) { - newval = (uval & FUTEX_OWNER_DIED) | newtid; + ret = futex_handle_fault((unsigned long)uaddr, fshared, attempt++); - curval = cmpxchg_futex_value_locked(uaddr, uval, newval); + spin_lock(q->lock_ptr); - if (curval == -EFAULT) - ret = -EFAULT; - if (curval == uval) - break; - uval = curval; - } - return ret; + /* + * Check if someone else fixed it for us: + */ + if (pi_state->owner != oldowner) + return 0; + + if (ret) + return ret; + + goto retry; } /* @@ -1507,7 +1559,7 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared, * that case: */ if (q.pi_state->owner != curr) - ret = fixup_pi_state_owner(uaddr, &q, curr); + ret = fixup_pi_state_owner(uaddr, &q, curr, fshared); } else { /* * Catch the rare case, where the lock was released @@ -1539,7 +1591,8 @@ static int futex_lock_pi(u32 __user *uaddr, struct rw_semaphore *fshared, int res; owner = rt_mutex_owner(&q.pi_state->pi_mutex); - res = fixup_pi_state_owner(uaddr, &q, owner); + res = fixup_pi_state_owner(uaddr, &q, owner, + fshared); /* propagate -EFAULT, if the fixup failed */ if (res) -- cgit v0.10.2 From fe6e9c1f25ac01f848bd084ee0ee62a5a0966ff3 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 23 Jun 2008 08:30:55 -0400 Subject: [PATCH] fix cgroup-inflicted breakage in block_dev.c devcgroup_inode_permission() expects MAY_FOO, not FMODE_FOO; kindly keep your misdesign consistent if you positively have to inflict it on the kernel. Signed-off-by: Al Viro diff --git a/fs/block_dev.c b/fs/block_dev.c index 470c10c..10d8a0a 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -931,8 +931,16 @@ static int do_open(struct block_device *bdev, struct file *file, int for_part) struct gendisk *disk; int ret; int part; + int perm = 0; - ret = devcgroup_inode_permission(bdev->bd_inode, file->f_mode); + if (file->f_mode & FMODE_READ) + perm |= MAY_READ; + if (file->f_mode & FMODE_WRITE) + perm |= MAY_WRITE; + /* + * hooks: /n/, see "layering violations". + */ + ret = devcgroup_inode_permission(bdev->bd_inode, perm); if (ret != 0) return ret; -- cgit v0.10.2 From 12fd0d3088d27867be68655bcab2b074f2835f60 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:07 -0700 Subject: [patch for 2.6.26 2/4] vfs: utimensat(): be consistent with utime() for immutable and append-only files This patch fixes utimensat() to make its behavior consistent with that of utime()/utimes() when dealing with files marked immutable and append-only. The current utimensat() implementation also returns EPERM if 'times' is non-NULL and the tv_nsec fields are both UTIME_NOW. For consistency, the (times != NULL && times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW) case should be treated like the traditional utimes() case where 'times' is NULL. That is, the call should succeed for a file marked append-only and should give the error EACCES if the file is marked as immutable. The simple way to do this is to set 'times' to NULL if (times[0].tv_nsec == UTIME_NOW && times[1].tv_nsec == UTIME_NOW). This is also the natural approach, since POSIX.1 semantics consider the times == {{x, UTIME_NOW}, {y, UTIME_NOW}} to be exactly equivalent to the case for times == NULL. (Thanks to Miklos for pointing this out.) Patch 3 in this series relies on the simplification provided by this patch. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index af059d5..14d3edb 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -102,6 +102,10 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags if (error) goto dput_and_out; + if (times && times[0].tv_nsec == UTIME_NOW && + times[1].tv_nsec == UTIME_NOW) + times = NULL; + /* Don't worry, the checks are done in inode_change_ok() */ newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME; if (times) { -- cgit v0.10.2 From 94c70b9ba7e9c1036284e779e2fef5be89021533 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:05 -0700 Subject: [patch for 2.6.26 1/4] vfs: utimensat(): ignore tv_sec if tv_nsec == UTIME_OMIT or UTIME_NOW The POSIX.1 draft spec for utimensat() says that if a times[n].tv_nsec field is UTIME_OMIT or UTIME_NOW, then the value in the corresponding tv_sec field is ignored. See the last sentence of this para, from the spec: If the tv_nsec field of a timespec structure has the special value UTIME_NOW, the file's relevant timestamp shall be set to the greatest value supported by the file system that is not greater than the current time. If the tv_nsec field has the special value UTIME_OMIT, the file's relevant timestamp shall not be changed. In either case, the tv_sec field shall be ignored. However the current Linux implementation requires the tv_sec value to be zero (or the EINVAL error results). This requirement should be removed. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index 14d3edb..d466bc5 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -173,14 +173,6 @@ asmlinkage long sys_utimensat(int dfd, char __user *filename, struct timespec __ if (utimes) { if (copy_from_user(&tstimes, utimes, sizeof(tstimes))) return -EFAULT; - if ((tstimes[0].tv_nsec == UTIME_OMIT || - tstimes[0].tv_nsec == UTIME_NOW) && - tstimes[0].tv_sec != 0) - return -EINVAL; - if ((tstimes[1].tv_nsec == UTIME_OMIT || - tstimes[1].tv_nsec == UTIME_NOW) && - tstimes[1].tv_sec != 0) - return -EINVAL; /* Nothing to do, we must not even check the path. */ if (tstimes[0].tv_nsec == UTIME_OMIT && -- cgit v0.10.2 From 4cca92264e61a90b43fc4e076cd25b7f4e16dc61 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:08 -0700 Subject: [patch for 2.6.26 3/4] vfs: utimensat(): fix error checking for {UTIME_NOW,UTIME_OMIT} case The POSIX.1 draft spec for utimensat() says: Only a process with the effective user ID equal to the user ID of the file or with appropriate privileges may use futimens() or utimensat() with a non-null times argument that does not have both tv_nsec fields set to UTIME_NOW and does not have both tv_nsec fields set to UTIME_OMIT. If this condition is violated, then the error EPERM should result. However, the current implementation does not generate EPERM if one tv_nsec field is UTIME_NOW while the other is UTIME_OMIT. It should give this error for that case. This patch: a) Repairs that problem. b) Removes the now unneeded nsec_special() helper function. c) Adds some comments to explain the checks that are being performed. Thanks to Miklos, who provided comments on the previous iteration of this patch. As a result, this version is a little simpler and and its logic is better structured. Miklos suggested an alternative idea, migrating the is_owner_or_cap() checks into fs/attr.c:inode_change_ok() via the use of an ATTR_OWNER_CHECK flag. Maybe we could do that later, but for now I've gone with this version, which is IMO simpler, and can be more easily read as being correct. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index d466bc5..118d1c3 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -40,14 +40,9 @@ asmlinkage long sys_utime(char __user *filename, struct utimbuf __user *times) #endif -static bool nsec_special(long nsec) -{ - return nsec == UTIME_OMIT || nsec == UTIME_NOW; -} - static bool nsec_valid(long nsec) { - if (nsec_special(nsec)) + if (nsec == UTIME_OMIT || nsec == UTIME_NOW) return true; return nsec >= 0 && nsec <= 999999999; @@ -106,7 +101,7 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags times[1].tv_nsec == UTIME_NOW) times = NULL; - /* Don't worry, the checks are done in inode_change_ok() */ + /* In most cases, the checks are done in inode_change_ok() */ newattrs.ia_valid = ATTR_CTIME | ATTR_MTIME | ATTR_ATIME; if (times) { error = -EPERM; @@ -128,15 +123,26 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags newattrs.ia_mtime.tv_nsec = times[1].tv_nsec; newattrs.ia_valid |= ATTR_MTIME_SET; } - } - /* - * If times is NULL or both times are either UTIME_OMIT or - * UTIME_NOW, then need to check permissions, because - * inode_change_ok() won't do it. - */ - if (!times || (nsec_special(times[0].tv_nsec) && - nsec_special(times[1].tv_nsec))) { + /* + * For the UTIME_OMIT/UTIME_NOW and UTIME_NOW/UTIME_OMIT + * cases, we need to make an extra check that is not done by + * inode_change_ok(). + */ + if (((times[0].tv_nsec == UTIME_NOW && + times[1].tv_nsec == UTIME_OMIT) + || + (times[0].tv_nsec == UTIME_OMIT && + times[1].tv_nsec == UTIME_NOW)) + && !is_owner_or_cap(inode)) + goto mnt_drop_write_and_out; + } else { + + /* + * If times is NULL (or both times are UTIME_NOW), + * then we need to check permissions, because + * inode_change_ok() won't do it. + */ error = -EACCES; if (IS_IMMUTABLE(inode)) goto mnt_drop_write_and_out; -- cgit v0.10.2 From c70f84417429f41519be0197a1092a53c2201f47 Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Mon, 9 Jun 2008 21:16:09 -0700 Subject: [patch for 2.6.26 4/4] vfs: utimensat(): fix write access check for futimens() The POSIX.1 draft spec for futimens()/utimensat() says: Only a process with the effective user ID equal to the user ID of the file, *or with write access to the file*, or with appropriate privileges may use futimens() or utimensat() with a null pointer as the times argument or with both tv_nsec fields set to the special value UTIME_NOW. The important piece here is "with write access to the file", and this matters for futimens(), which deals with an argument that is a file descriptor referring to the file whose timestamps are being updated, The standard is saying that the "writability" check is based on the file permissions, not the access mode with which the file is opened. (This behavior is consistent with the semantics of FreeBSD's futimes().) However, Linux is currently doing the latter -- futimens(fd, times) is a library function implemented as utimensat(fd, NULL, times, 0) and within the utimensat() implementation we have the code: f = fget(dfd); // dfd is 'fd' ... if (f) { if (!(f->f_mode & FMODE_WRITE)) goto mnt_drop_write_and_out; The check should instead be based on the file permissions. Thanks to Miklos for pointing out how to do this check. Miklos also pointed out a simplification that could be made to my first version of this patch, since the checks for the pathname and file descriptor cases can now be conflated. Acked-by: Miklos Szeredi Cc: Al Viro Cc: Ulrich Drepper Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/utimes.c b/fs/utimes.c index 118d1c3..b6b664e 100644 --- a/fs/utimes.c +++ b/fs/utimes.c @@ -148,14 +148,9 @@ long do_utimes(int dfd, char __user *filename, struct timespec *times, int flags goto mnt_drop_write_and_out; if (!is_owner_or_cap(inode)) { - if (f) { - if (!(f->f_mode & FMODE_WRITE)) - goto mnt_drop_write_and_out; - } else { - error = vfs_permission(&nd, MAY_WRITE); - if (error) - goto mnt_drop_write_and_out; - } + error = permission(inode, MAY_WRITE, NULL); + if (error) + goto mnt_drop_write_and_out; } } mutex_lock(&inode->i_mutex); -- cgit v0.10.2 From c8e7f449b225ee6c87454ac069f0a041035c5140 Mon Sep 17 00:00:00 2001 From: Jan Blunck Date: Mon, 9 Jun 2008 16:40:35 -0700 Subject: [patch 1/4] vfs: path_{get,put}() cleanups Here are some more places where path_{get,put}() can be used instead of dput()/mntput() pair. Signed-off-by: Jan Blunck Cc: Al Viro Cc: Jens Axboe Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index c7e4353..ee15446 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -581,15 +581,13 @@ static __always_inline int link_path_walk(const char *name, struct nameidata *nd int result; /* make sure the stuff we saved doesn't go away */ - dget(save.dentry); - mntget(save.mnt); + path_get(&save); result = __link_path_walk(name, nd); if (result == -ESTALE) { /* nd->path had been dropped */ nd->path = save; - dget(nd->path.dentry); - mntget(nd->path.mnt); + path_get(&nd->path); nd->flags |= LOOKUP_REVAL; result = __link_path_walk(name, nd); } @@ -1216,8 +1214,9 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt, nd->flags = flags; nd->depth = 0; - nd->path.mnt = mntget(mnt); - nd->path.dentry = dget(dentry); + nd->path.dentry = dentry; + nd->path.mnt = mnt; + path_get(&nd->path); retval = path_walk(name, nd); if (unlikely(!retval && !audit_dummy_context() && nd->path.dentry && diff --git a/fs/pipe.c b/fs/pipe.c index ec228bc..700f4e0 100644 --- a/fs/pipe.c +++ b/fs/pipe.c @@ -1003,8 +1003,7 @@ struct file *create_write_pipe(void) void free_write_pipe(struct file *f) { free_pipe_info(f->f_dentry->d_inode); - dput(f->f_path.dentry); - mntput(f->f_path.mnt); + path_put(&f->f_path); put_filp(f); } @@ -1015,8 +1014,8 @@ struct file *create_read_pipe(struct file *wrf) return ERR_PTR(-ENFILE); /* Grab pipe from the writer */ - f->f_path.mnt = mntget(wrf->f_path.mnt); - f->f_path.dentry = dget(wrf->f_path.dentry); + f->f_path = wrf->f_path; + path_get(&wrf->f_path); f->f_mapping = wrf->f_path.dentry->d_inode->i_mapping; f->f_pos = 0; @@ -1068,8 +1067,7 @@ int do_pipe(int *fd) err_fdr: put_unused_fd(fdr); err_read_pipe: - dput(fr->f_dentry); - mntput(fr->f_vfsmnt); + path_put(&fr->f_path); put_filp(fr); err_write_pipe: free_write_pipe(fw); -- cgit v0.10.2 From 20d4fdc1a788e4ca0aaf2422772ba668e7e10839 Mon Sep 17 00:00:00 2001 From: Jan Engelhardt Date: Mon, 9 Jun 2008 16:40:36 -0700 Subject: [patch 2/4] fs: make struct file arg to d_path const Signed-off-by: Jan Engelhardt Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index 3ee588d5..c4c9072 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1847,7 +1847,7 @@ Elong: * * "buflen" should be positive. Caller holds the dcache_lock. */ -char *d_path(struct path *path, char *buf, int buflen) +char *d_path(const struct path *path, char *buf, int buflen) { char *res; struct path root; diff --git a/include/linux/dcache.h b/include/linux/dcache.h index 2a66394..d982eb8 100644 --- a/include/linux/dcache.h +++ b/include/linux/dcache.h @@ -300,7 +300,7 @@ extern int d_validate(struct dentry *, struct dentry *); extern char *dynamic_dname(struct dentry *, char *, int, const char *, ...); extern char *__d_path(const struct path *path, struct path *root, char *, int); -extern char *d_path(struct path *, char *, int); +extern char *d_path(const struct path *, char *, int); extern char *dentry_path(struct dentry *, char *, int); /* Allocation counts.. */ -- cgit v0.10.2 From 694a1764d657e0f7a9b139bc7269c8d5f5a2534b Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Mon, 9 Jun 2008 16:40:37 -0700 Subject: [patch 3/4] vfs: fix ERR_PTR abuse in generic_readlink generic_readlink calls ERR_PTR for negative and positive values (vfs_readlink returns length of "link"), but it should not (not an errno) and does not need to. Signed-off-by: Marcin Slusarz Cc: Al Viro Cc: Christoph Hellwig Acked-by: Miklos Szeredi Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index ee15446..01e67dd 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2856,16 +2856,17 @@ int generic_readlink(struct dentry *dentry, char __user *buffer, int buflen) { struct nameidata nd; void *cookie; + int res; nd.depth = 0; cookie = dentry->d_inode->i_op->follow_link(dentry, &nd); - if (!IS_ERR(cookie)) { - int res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd)); - if (dentry->d_inode->i_op->put_link) - dentry->d_inode->i_op->put_link(dentry, &nd, cookie); - cookie = ERR_PTR(res); - } - return PTR_ERR(cookie); + if (IS_ERR(cookie)) + return PTR_ERR(cookie); + + res = vfs_readlink(dentry, buffer, buflen, nd_get_link(&nd)); + if (dentry->d_inode->i_op->put_link) + dentry->d_inode->i_op->put_link(dentry, &nd, cookie); + return res; } int vfs_follow_link(struct nameidata *nd, const char *link) -- cgit v0.10.2 From f9f48ec72bfc9489a30bc6ddbfcf27d86a8bc651 Mon Sep 17 00:00:00 2001 From: "Denis V. Lunev" Date: Mon, 9 Jun 2008 16:40:38 -0700 Subject: [patch 4/4] flock: remove unused fields from file_lock_operations fl_insert and fl_remove are not used right now in the kernel. Remove them. Signed-off-by: Denis V. Lunev Cc: Matthew Wilcox Cc: Alexander Viro Cc: "J. Bruce Fields" Signed-off-by: Andrew Morton Signed-off-by: Al Viro diff --git a/fs/locks.c b/fs/locks.c index 11dbf08..dce8c74 100644 --- a/fs/locks.c +++ b/fs/locks.c @@ -561,9 +561,6 @@ static void locks_insert_lock(struct file_lock **pos, struct file_lock *fl) /* insert into file's list */ fl->fl_next = *pos; *pos = fl; - - if (fl->fl_ops && fl->fl_ops->fl_insert) - fl->fl_ops->fl_insert(fl); } /* @@ -586,9 +583,6 @@ static void locks_delete_lock(struct file_lock **thisfl_p) fl->fl_fasync = NULL; } - if (fl->fl_ops && fl->fl_ops->fl_remove) - fl->fl_ops->fl_remove(fl); - if (fl->fl_nspid) { put_pid(fl->fl_nspid); fl->fl_nspid = NULL; diff --git a/include/linux/fs.h b/include/linux/fs.h index d490779..7c10808 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -894,8 +894,6 @@ static inline int file_check_writeable(struct file *filp) typedef struct files_struct *fl_owner_t; struct file_lock_operations { - void (*fl_insert)(struct file_lock *); /* lock insertion callback */ - void (*fl_remove)(struct file_lock *); /* lock removal callback */ void (*fl_copy_lock)(struct file_lock *, struct file_lock *); void (*fl_release_private)(struct file_lock *); }; -- cgit v0.10.2 From 87afd448b186c885d67a08b7417cd46253b6a9d6 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Mon, 23 Jun 2008 09:29:58 -0700 Subject: IB/mthca: Clear ICM pages before handing to FW Current memfree FW has a bug which in some cases, assumes that ICM pages passed to it are cleared. This patch uses __GFP_ZERO to allocate all ICM pages passed to the FW. Once firmware with a fix is released, we can make the workaround conditional on firmware version. This fixes the bug reported by Arthur Kepner here: http://lists.openfabrics.org/pipermail/general/2008-May/050026.html Cc: Signed-off-by: Eli Cohen [ Rewritten to be a one-liner using __GFP_ZERO instead of vmap()ing ICM memory and memset()ing it to 0. - Roland ] Signed-off-by: Roland Dreier diff --git a/drivers/infiniband/hw/mthca/mthca_memfree.c b/drivers/infiniband/hw/mthca/mthca_memfree.c index b224079..d5862e5 100644 --- a/drivers/infiniband/hw/mthca/mthca_memfree.c +++ b/drivers/infiniband/hw/mthca/mthca_memfree.c @@ -109,7 +109,11 @@ static int mthca_alloc_icm_pages(struct scatterlist *mem, int order, gfp_t gfp_m { struct page *page; - page = alloc_pages(gfp_mask, order); + /* + * Use __GFP_ZERO because buggy firmware assumes ICM pages are + * cleared, and subtle failures are seen if they aren't. + */ + page = alloc_pages(gfp_mask | __GFP_ZERO, order); if (!page) return -ENOMEM; -- cgit v0.10.2 From be285c712bbbe5db43e503782fbef2bfeaa345f9 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Mon, 16 Jun 2008 13:28:07 +0200 Subject: [patch 3/3] vfs: make d_path() consistent across mount operations The path that __d_path() computes can become slightly inconsistent when it races with mount operations: it grabs the vfsmount_lock when traversing mount points but immediately drops it again, only to re-grab it when it reaches the next mount point. The result is that the filename computed is not always consisent, and the file may never have had that name. (This is unlikely, but still possible.) Fix this by grabbing the vfsmount_lock for the whole duration of __d_path(). Signed-off-by: Andreas Gruenbacher Signed-off-by: John Johansen Signed-off-by: Miklos Szeredi Acked-by: Christoph Hellwig Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index c4c9072..2b479de 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1782,6 +1782,7 @@ char *__d_path(const struct path *path, struct path *root, char * end = buffer+buflen; char * retval; + spin_lock(&vfsmount_lock); prepend(&end, &buflen, "\0", 1); if (!IS_ROOT(dentry) && d_unhashed(dentry) && (prepend(&end, &buflen, " (deleted)", 10) != 0)) @@ -1800,14 +1801,11 @@ char *__d_path(const struct path *path, struct path *root, break; if (dentry == vfsmnt->mnt_root || IS_ROOT(dentry)) { /* Global root? */ - spin_lock(&vfsmount_lock); if (vfsmnt->mnt_parent == vfsmnt) { - spin_unlock(&vfsmount_lock); goto global_root; } dentry = vfsmnt->mnt_mountpoint; vfsmnt = vfsmnt->mnt_parent; - spin_unlock(&vfsmount_lock); continue; } parent = dentry->d_parent; @@ -1820,6 +1818,8 @@ char *__d_path(const struct path *path, struct path *root, dentry = parent; } +out: + spin_unlock(&vfsmount_lock); return retval; global_root: @@ -1829,9 +1829,11 @@ global_root: goto Elong; root->mnt = vfsmnt; root->dentry = dentry; - return retval; + goto out; + Elong: - return ERR_PTR(-ENAMETOOLONG); + retval = ERR_PTR(-ENAMETOOLONG); + goto out; } /** -- cgit v0.10.2 From 31f3e0b3a18c6d48196c40a82a3b8c01f4ff6b23 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 23 Jun 2008 18:11:52 +0200 Subject: [patch 1/3] vfs: dcache sparse fixes Fix the following sparse warnings: fs/dcache.c:2183:19: warning: symbol 'filp_cachep' was not declared. Should it be static? fs/dcache.c:115:3: warning: context imbalance in 'dentry_iput' - unexpected unlock fs/dcache.c:188:2: warning: context imbalance in 'dput' - different lock contexts for basic block fs/dcache.c:400:2: warning: context imbalance in 'prune_one_dentry' - different lock contexts for basic block fs/dcache.c:431:22: warning: context imbalance in 'prune_dcache' - different lock contexts for basic block fs/dcache.c:563:2: warning: context imbalance in 'shrink_dcache_sb' - different lock contexts for basic block fs/dcache.c:1385:6: warning: context imbalance in 'd_delete' - wrong count at exit fs/dcache.c:1636:2: warning: context imbalance in '__d_unalias' - unexpected unlock fs/dcache.c:1735:2: warning: context imbalance in 'd_materialise_unique' - different lock contexts for basic block Signed-off-by: Miklos Szeredi Reviewed-by: Matthew Wilcox Acked-by: Christoph Hellwig Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index 2b479de..e4b2b94 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -17,6 +17,7 @@ #include #include #include +#include #include #include #include @@ -106,9 +107,10 @@ static void dentry_lru_remove(struct dentry *dentry) /* * Release the dentry's inode, using the filesystem * d_iput() operation if defined. - * Called with dcache_lock and per dentry lock held, drops both. */ static void dentry_iput(struct dentry * dentry) + __releases(dentry->d_lock) + __releases(dcache_lock) { struct inode *inode = dentry->d_inode; if (inode) { @@ -132,12 +134,13 @@ static void dentry_iput(struct dentry * dentry) * d_kill - kill dentry and return parent * @dentry: dentry to kill * - * Called with dcache_lock and d_lock, releases both. The dentry must - * already be unhashed and removed from the LRU. + * The dentry must already be unhashed and removed from the LRU. * * If this is the root of the dentry tree, return NULL. */ static struct dentry *d_kill(struct dentry *dentry) + __releases(dentry->d_lock) + __releases(dcache_lock) { struct dentry *parent; @@ -383,11 +386,11 @@ restart: * Try to prune ancestors as well. This is necessary to prevent * quadratic behavior of shrink_dcache_parent(), but is also expected * to be beneficial in reducing dentry cache fragmentation. - * - * Called with dcache_lock, drops it and then regains. - * Called with dentry->d_lock held, drops it. */ static void prune_one_dentry(struct dentry * dentry) + __releases(dentry->d_lock) + __releases(dcache_lock) + __acquires(dcache_lock) { __d_drop(dentry); dentry = d_kill(dentry); @@ -1604,10 +1607,9 @@ static int d_isparent(struct dentry *p1, struct dentry *p2) * * Note: If ever the locking in lock_rename() changes, then please * remember to update this too... - * - * On return, dcache_lock will have been unlocked. */ static struct dentry *__d_unalias(struct dentry *dentry, struct dentry *alias) + __releases(dcache_lock) { struct mutex *m1 = NULL, *m2 = NULL; struct dentry *ret; @@ -1743,7 +1745,6 @@ out_nolock: shouldnt_be_hashed: spin_unlock(&dcache_lock); BUG(); - goto shouldnt_be_hashed; } static int prepend(char **buffer, int *buflen, const char *str, @@ -1758,7 +1759,7 @@ static int prepend(char **buffer, int *buflen, const char *str, } /** - * d_path - return the path of a dentry + * __d_path - return the path of a dentry * @path: the dentry/vfsmount to report * @root: root vfsmnt/dentry (may be modified by this function) * @buffer: buffer to return value in @@ -1847,7 +1848,7 @@ Elong: * * Returns the buffer or an error code if the path was too long. * - * "buflen" should be positive. Caller holds the dcache_lock. + * "buflen" should be positive. */ char *d_path(const struct path *path, char *buf, int buflen) { -- cgit v0.10.2 From cdd16d0265c9234228fd37fbbad844d7e894b278 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Mon, 23 Jun 2008 18:11:53 +0200 Subject: [patch 2/3] vfs: dcache cleanups Comment from Al Viro: add prepend_name() wrapper. Signed-off-by: Miklos Szeredi Signed-off-by: Al Viro diff --git a/fs/dcache.c b/fs/dcache.c index e4b2b94..6068c25 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1747,8 +1747,7 @@ shouldnt_be_hashed: BUG(); } -static int prepend(char **buffer, int *buflen, const char *str, - int namelen) +static int prepend(char **buffer, int *buflen, const char *str, int namelen) { *buflen -= namelen; if (*buflen < 0) @@ -1758,6 +1757,11 @@ static int prepend(char **buffer, int *buflen, const char *str, return 0; } +static int prepend_name(char **buffer, int *buflen, struct qstr *name) +{ + return prepend(buffer, buflen, name->name, name->len); +} + /** * __d_path - return the path of a dentry * @path: the dentry/vfsmount to report @@ -1780,8 +1784,8 @@ char *__d_path(const struct path *path, struct path *root, { struct dentry *dentry = path->dentry; struct vfsmount *vfsmnt = path->mnt; - char * end = buffer+buflen; - char * retval; + char *end = buffer + buflen; + char *retval; spin_lock(&vfsmount_lock); prepend(&end, &buflen, "\0", 1); @@ -1811,8 +1815,7 @@ char *__d_path(const struct path *path, struct path *root, } parent = dentry->d_parent; prefetch(parent); - if ((prepend(&end, &buflen, dentry->d_name.name, - dentry->d_name.len) != 0) || + if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) || (prepend(&end, &buflen, "/", 1) != 0)) goto Elong; retval = end; @@ -1825,8 +1828,7 @@ out: global_root: retval += 1; /* hit the slash */ - if (prepend(&retval, &buflen, dentry->d_name.name, - dentry->d_name.len) != 0) + if (prepend_name(&retval, &buflen, &dentry->d_name) != 0) goto Elong; root->mnt = vfsmnt; root->dentry = dentry; @@ -1918,16 +1920,11 @@ char *dentry_path(struct dentry *dentry, char *buf, int buflen) retval = end-1; *retval = '/'; - for (;;) { - struct dentry *parent; - if (IS_ROOT(dentry)) - break; + while (!IS_ROOT(dentry)) { + struct dentry *parent = dentry->d_parent; - parent = dentry->d_parent; prefetch(parent); - - if ((prepend(&end, &buflen, dentry->d_name.name, - dentry->d_name.len) != 0) || + if ((prepend_name(&end, &buflen, &dentry->d_name) != 0) || (prepend(&end, &buflen, "/", 1) != 0)) goto Elong; @@ -1978,7 +1975,7 @@ asmlinkage long sys_getcwd(char __user *buf, unsigned long size) error = -ENOENT; /* Has the current directory has been unlinked? */ spin_lock(&dcache_lock); - if (pwd.dentry->d_parent == pwd.dentry || !d_unhashed(pwd.dentry)) { + if (IS_ROOT(pwd.dentry) || !d_unhashed(pwd.dentry)) { unsigned long len; struct path tmp = root; char * cwd; -- cgit v0.10.2 From 36c7343b4ecac2432430f5393314f1bdc2c219a5 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 23 Jun 2008 12:06:52 +0100 Subject: tty_driver: Update required method documentation Some of the requirement rules are now more relaxed. Also correct a contradiction in the previous update Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index 59f1c0b..d2a0035 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -27,8 +27,7 @@ * This routine is called by the kernel to write a series of * characters to the tty device. The characters may come from * user space or kernel space. This routine will return the - * number of characters actually accepted for writing. This - * routine is mandatory. + * number of characters actually accepted for writing. * * Optional: Required for writable devices. * @@ -134,7 +133,7 @@ * This routine notifies the tty driver that it should hangup the * tty device. * - * Required: + * Optional: * * void (*break_ctl)(struct tty_stuct *tty, int state); * -- cgit v0.10.2 From 96a331b1d6426726c37242ddbe939ee14b255790 Mon Sep 17 00:00:00 2001 From: Gustavo Fernando Padovan Date: Mon, 23 Jun 2008 12:07:06 +0100 Subject: removed unused var real_tty on n_tty_ioctl() I noted that the 'struct tty_struct *real_tty' is not used in this function, so I removed the code about 'real_tty'. Signed-off-by: Gustavo Fernando Padovan Acked-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/char/tty_ioctl.c b/drivers/char/tty_ioctl.c index b1a757a..8f81139 100644 --- a/drivers/char/tty_ioctl.c +++ b/drivers/char/tty_ioctl.c @@ -981,16 +981,9 @@ EXPORT_SYMBOL_GPL(tty_perform_flush); int n_tty_ioctl(struct tty_struct *tty, struct file *file, unsigned int cmd, unsigned long arg) { - struct tty_struct *real_tty; unsigned long flags; int retval; - if (tty->driver->type == TTY_DRIVER_TYPE_PTY && - tty->driver->subtype == PTY_TYPE_MASTER) - real_tty = tty->link; - else - real_tty = tty; - switch (cmd) { case TCXONC: retval = tty_check_change(tty); -- cgit v0.10.2 From 672ca28e300c17bf8d792a2a7a8631193e580c74 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 23 Jun 2008 11:21:37 -0700 Subject: Fix ZERO_PAGE breakage with vmware Commit 89f5b7da2a6bad2e84670422ab8192382a5aeb9f ("Reinstate ZERO_PAGE optimization in 'get_user_pages()' and fix XIP") broke vmware, as reported by Jeff Chua: "This broke vmware 6.0.4. Jun 22 14:53:03.845: vmx| NOT_IMPLEMENTED /build/mts/release/bora-93057/bora/vmx/main/vmmonPosix.c:774" and the reason seems to be that there's an old bug in how we handle do FOLL_ANON on VM_SHARED areas in get_user_pages(), but since it only triggered if the whole page table was missing, nobody had apparently hit it before. The recent changes to 'follow_page()' made the FOLL_ANON logic trigger not just for whole missing page tables, but for individual pages as well, and exposed this problem. This fixes it by making the test for when FOLL_ANON is used more careful, and also makes the code easier to read and understand by moving the logic to a separate inline function. Reported-and-tested-by: Jeff Chua Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index 9aefaae..423e0e7 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1045,6 +1045,26 @@ no_page_table: return page; } +/* Can we do the FOLL_ANON optimization? */ +static inline int use_zero_page(struct vm_area_struct *vma) +{ + /* + * We don't want to optimize FOLL_ANON for make_pages_present() + * when it tries to page in a VM_LOCKED region. As to VM_SHARED, + * we want to get the page from the page tables to make sure + * that we serialize and update with any other user of that + * mapping. + */ + if (vma->vm_flags & (VM_LOCKED | VM_SHARED)) + return 0; + /* + * And if we have a fault or a nopfn routine, it's not an + * anonymous region. + */ + return !vma->vm_ops || + (!vma->vm_ops->fault && !vma->vm_ops->nopfn); +} + int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, unsigned long start, int len, int write, int force, struct page **pages, struct vm_area_struct **vmas) @@ -1119,8 +1139,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, foll_flags = FOLL_TOUCH; if (pages) foll_flags |= FOLL_GET; - if (!write && !(vma->vm_flags & VM_LOCKED) && - (!vma->vm_ops || !vma->vm_ops->fault)) + if (!write && use_zero_page(vma)) foll_flags |= FOLL_ANON; do { -- cgit v0.10.2 From 945754a1754f9d4c2974a8241ad4f92fad7f3a6a Mon Sep 17 00:00:00 2001 From: Nick Piggin Date: Mon, 23 Jun 2008 14:30:30 +0200 Subject: mm: fix race in COW logic There is a race in the COW logic. It contains a shortcut to avoid the COW and reuse the page if we have the sole reference on the page, however it is possible to have two racing do_wp_page()ers with one causing the other to mistakenly believe it is safe to take the shortcut when it is not. This could lead to data corruption. Process 1 and process2 each have a wp pte of the same anon page (ie. one forked the other). The page's mapcount is 2. Then they both attempt to write to it around the same time... proc1 proc2 thr1 proc2 thr2 CPU0 CPU1 CPU3 do_wp_page() do_wp_page() trylock_page() can_share_swap_page() load page mapcount (==2) reuse = 0 pte unlock copy page to new_page pte lock page_remove_rmap(page); trylock_page() can_share_swap_page() load page mapcount (==1) reuse = 1 ptep_set_access_flags (allow W) write private key into page read from page ptep_clear_flush() set_pte_at(pte of new_page) Fix this by moving the page_remove_rmap of the old page after the pte clear and flush. Potentially the entire branch could be moved down here, but in order to stay consistent, I won't (should probably move all the *_mm_counter stuff with one patch). Signed-off-by: Nick Piggin Acked-by: Hugh Dickins Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index 423e0e7..d14b251 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1785,7 +1785,6 @@ gotten: page_table = pte_offset_map_lock(mm, pmd, address, &ptl); if (likely(pte_same(*page_table, orig_pte))) { if (old_page) { - page_remove_rmap(old_page, vma); if (!PageAnon(old_page)) { dec_mm_counter(mm, file_rss); inc_mm_counter(mm, anon_rss); @@ -1807,6 +1806,32 @@ gotten: lru_cache_add_active(new_page); page_add_new_anon_rmap(new_page, vma, address); + if (old_page) { + /* + * Only after switching the pte to the new page may + * we remove the mapcount here. Otherwise another + * process may come and find the rmap count decremented + * before the pte is switched to the new page, and + * "reuse" the old page writing into it while our pte + * here still points into it and can be read by other + * threads. + * + * The critical issue is to order this + * page_remove_rmap with the ptp_clear_flush above. + * Those stores are ordered by (if nothing else,) + * the barrier present in the atomic_add_negative + * in page_remove_rmap. + * + * Then the TLB flush in ptep_clear_flush ensures that + * no process can access the old page before the + * decremented mapcount is visible. And the old page + * cannot be reused until after the decremented + * mapcount is visible. So transitively, TLBs to + * old page will be flushed before it can be reused. + */ + page_remove_rmap(old_page, vma); + } + /* Free the old page.. */ new_page = old_page; ret |= VM_FAULT_WRITE; -- cgit v0.10.2 From 33852a1f2bb014e4047a844556c0d76a2f790c37 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 19 Jun 2008 14:20:11 -0400 Subject: NFS: Reduce the NFS mount code stack usage. This appears to fix the Oops reported in http://bugzilla.kernel.org/show_bug.cgi?id=10826 Signed-off-by: Trond Myklebust diff --git a/fs/nfs/super.c b/fs/nfs/super.c index 2a4a024..dac663d 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1216,8 +1216,6 @@ static int nfs_validate_mount_data(void *options, { struct nfs_mount_data *data = (struct nfs_mount_data *)options; - memset(args, 0, sizeof(*args)); - if (data == NULL) goto out_no_data; @@ -1585,24 +1583,29 @@ static int nfs_get_sb(struct file_system_type *fs_type, { struct nfs_server *server = NULL; struct super_block *s; - struct nfs_fh mntfh; - struct nfs_parsed_mount_data data; + struct nfs_parsed_mount_data *data; + struct nfs_fh *mntfh; struct dentry *mntroot; int (*compare_super)(struct super_block *, void *) = nfs_compare_super; struct nfs_sb_mountdata sb_mntdata = { .mntflags = flags, }; - int error; + int error = -ENOMEM; - security_init_mnt_opts(&data.lsm_opts); + data = kzalloc(sizeof(*data), GFP_KERNEL); + mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL); + if (data == NULL || mntfh == NULL) + goto out_free_fh; + + security_init_mnt_opts(&data->lsm_opts); /* Validate the mount data */ - error = nfs_validate_mount_data(raw_data, &data, &mntfh, dev_name); + error = nfs_validate_mount_data(raw_data, data, mntfh, dev_name); if (error < 0) goto out; /* Get a volume representation */ - server = nfs_create_server(&data, &mntfh); + server = nfs_create_server(data, mntfh); if (IS_ERR(server)) { error = PTR_ERR(server); goto out; @@ -1630,16 +1633,16 @@ static int nfs_get_sb(struct file_system_type *fs_type, if (!s->s_root) { /* initial superblock/root creation */ - nfs_fill_super(s, &data); + nfs_fill_super(s, data); } - mntroot = nfs_get_root(s, &mntfh); + mntroot = nfs_get_root(s, mntfh); if (IS_ERR(mntroot)) { error = PTR_ERR(mntroot); goto error_splat_super; } - error = security_sb_set_mnt_opts(s, &data.lsm_opts); + error = security_sb_set_mnt_opts(s, &data->lsm_opts); if (error) goto error_splat_root; @@ -1649,9 +1652,12 @@ static int nfs_get_sb(struct file_system_type *fs_type, error = 0; out: - kfree(data.nfs_server.hostname); - kfree(data.mount_server.hostname); - security_free_mnt_opts(&data.lsm_opts); + kfree(data->nfs_server.hostname); + kfree(data->mount_server.hostname); + security_free_mnt_opts(&data->lsm_opts); +out_free_fh: + kfree(mntfh); + kfree(data); return error; out_err_nosb: @@ -1800,8 +1806,6 @@ static int nfs4_validate_mount_data(void *options, struct nfs4_mount_data *data = (struct nfs4_mount_data *)options; char *c; - memset(args, 0, sizeof(*args)); - if (data == NULL) goto out_no_data; @@ -1959,26 +1963,31 @@ out_no_client_address: static int nfs4_get_sb(struct file_system_type *fs_type, int flags, const char *dev_name, void *raw_data, struct vfsmount *mnt) { - struct nfs_parsed_mount_data data; + struct nfs_parsed_mount_data *data; struct super_block *s; struct nfs_server *server; - struct nfs_fh mntfh; + struct nfs_fh *mntfh; struct dentry *mntroot; int (*compare_super)(struct super_block *, void *) = nfs_compare_super; struct nfs_sb_mountdata sb_mntdata = { .mntflags = flags, }; - int error; + int error = -ENOMEM; - security_init_mnt_opts(&data.lsm_opts); + data = kzalloc(sizeof(*data), GFP_KERNEL); + mntfh = kzalloc(sizeof(*mntfh), GFP_KERNEL); + if (data == NULL || mntfh == NULL) + goto out_free_fh; + + security_init_mnt_opts(&data->lsm_opts); /* Validate the mount data */ - error = nfs4_validate_mount_data(raw_data, &data, dev_name); + error = nfs4_validate_mount_data(raw_data, data, dev_name); if (error < 0) goto out; /* Get a volume representation */ - server = nfs4_create_server(&data, &mntfh); + server = nfs4_create_server(data, mntfh); if (IS_ERR(server)) { error = PTR_ERR(server); goto out; @@ -2009,13 +2018,13 @@ static int nfs4_get_sb(struct file_system_type *fs_type, nfs4_fill_super(s); } - mntroot = nfs4_get_root(s, &mntfh); + mntroot = nfs4_get_root(s, mntfh); if (IS_ERR(mntroot)) { error = PTR_ERR(mntroot); goto error_splat_super; } - error = security_sb_set_mnt_opts(s, &data.lsm_opts); + error = security_sb_set_mnt_opts(s, &data->lsm_opts); if (error) goto error_splat_root; @@ -2025,10 +2034,13 @@ static int nfs4_get_sb(struct file_system_type *fs_type, error = 0; out: - kfree(data.client_address); - kfree(data.nfs_server.export_path); - kfree(data.nfs_server.hostname); - security_free_mnt_opts(&data.lsm_opts); + kfree(data->client_address); + kfree(data->nfs_server.export_path); + kfree(data->nfs_server.hostname); + security_free_mnt_opts(&data->lsm_opts); +out_free_fh: + kfree(mntfh); + kfree(data); return error; out_free: -- cgit v0.10.2 From b7e2445737ff69cef892b6fd9cd71cae2c9e9515 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 19 Jun 2008 15:21:11 -0400 Subject: NFS: Fix filehandle size comparisons in the mount code Fix a sign issue in xdr_decode_fhstatus3() Fix incorrect comparison in nfs_validate_mount_data() Signed-off-by: Trond Myklebust diff --git a/fs/nfs/mount_clnt.c b/fs/nfs/mount_clnt.c index 49c7cd0..779d2eb 100644 --- a/fs/nfs/mount_clnt.c +++ b/fs/nfs/mount_clnt.c @@ -130,10 +130,11 @@ static int xdr_decode_fhstatus3(struct rpc_rqst *req, __be32 *p, struct mnt_fhstatus *res) { struct nfs_fh *fh = res->fh; + unsigned size; if ((res->status = ntohl(*p++)) == 0) { - int size = ntohl(*p++); - if (size <= NFS3_FHSIZE) { + size = ntohl(*p++); + if (size <= NFS3_FHSIZE && size != 0) { fh->size = size; memcpy(fh->data, p, size); } else diff --git a/fs/nfs/super.c b/fs/nfs/super.c index dac663d..614efee 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -1249,13 +1249,13 @@ static int nfs_validate_mount_data(void *options, case 5: memset(data->context, 0, sizeof(data->context)); case 6: - if (data->flags & NFS_MOUNT_VER3) + if (data->flags & NFS_MOUNT_VER3) { + if (data->root.size > NFS3_FHSIZE || data->root.size == 0) + goto out_invalid_fh; mntfh->size = data->root.size; - else + } else mntfh->size = NFS2_FHSIZE; - if (mntfh->size > sizeof(mntfh->data)) - goto out_invalid_fh; memcpy(mntfh->data, data->root.data, mntfh->size); if (mntfh->size < sizeof(mntfh->data)) -- cgit v0.10.2 From 03fa9e84e5dc10aeacb0e4eb2f708cd9fc36a5b8 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Thu, 5 Jun 2008 16:02:35 -0400 Subject: NFS: nfs_updatepage(): don't mark page as dirty if an error occurred Signed-off-by: Trond Myklebust diff --git a/fs/nfs/write.c b/fs/nfs/write.c index 6d8ace3..f333848 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -739,12 +739,13 @@ int nfs_updatepage(struct file *file, struct page *page, } status = nfs_writepage_setup(ctx, page, offset, count); - __set_page_dirty_nobuffers(page); + if (status < 0) + nfs_set_pageerror(page); + else + __set_page_dirty_nobuffers(page); dprintk("NFS: nfs_updatepage returns %d (isize %Ld)\n", status, (long long)i_size_read(inode)); - if (status < 0) - nfs_set_pageerror(page); return status; } -- cgit v0.10.2 From 72c6e251ed84b3a9cdfde6711191155c47bb2b9c Mon Sep 17 00:00:00 2001 From: Thorsten Kranzkowski Date: Mon, 23 Jun 2008 20:57:22 +0000 Subject: alpha: fix compile error in arch/alpha/mm/init.c MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Commit 9267b4b3880d00dc2dab90f1d817c856939114f7 ("alpha: fix module load failures on smp (bug #10926)") causes a regression for my ev4 uniprocessor build: CC arch/alpha/mm/init.o /export/data/repositories/linux-2.6/arch/alpha/mm/init.c:34: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘typeof’ make[2]: *** [arch/alpha/mm/init.o] Error 1 make[1]: *** [arch/alpha/mm] Error 2 make: *** [sub-make] Error 2 This fixes it for me (compile and boot tested): Signed-off-by: Thorsten Kranzkowski Acked-by: Ivan Kokshaysky Signed-off-by: Linus Torvalds diff --git a/include/asm-alpha/percpu.h b/include/asm-alpha/percpu.h index 82e8a94..3495e8e 100644 --- a/include/asm-alpha/percpu.h +++ b/include/asm-alpha/percpu.h @@ -69,6 +69,8 @@ extern unsigned long __per_cpu_offset[NR_CPUS]; #define __get_cpu_var(var) per_cpu_var(var) #define __raw_get_cpu_var(var) per_cpu_var(var) +#define PER_CPU_ATTRIBUTES + #endif /* SMP */ #define DECLARE_PER_CPU(type, name) extern __typeof__(type) per_cpu_var(name) -- cgit v0.10.2 From d4acf7e7abe45457e751525a2a4d5b693dfdd597 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 6 Jun 2008 16:37:35 -0300 Subject: KVM: Fix race between timer migration and vcpu migration A guest vcpu instance can be scheduled to a different physical CPU between the test for KVM_REQ_MIGRATE_TIMER and local_irq_disable(). If that happens, the timer will only be migrated to the current pCPU on the next exit, meaning that guest LAPIC timer event can be delayed until a host interrupt is triggered. Fix it by cancelling guest entry if any vcpu request is pending. This has the side effect of nicely consolidating vcpu->requests checks. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 00acf13..b90744a 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2759,6 +2759,8 @@ again: if (vcpu->requests) { if (test_and_clear_bit(KVM_REQ_MIGRATE_TIMER, &vcpu->requests)) __kvm_migrate_timers(vcpu); + if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests)) + kvm_x86_ops->tlb_flush(vcpu); if (test_and_clear_bit(KVM_REQ_REPORT_TPR_ACCESS, &vcpu->requests)) { kvm_run->exit_reason = KVM_EXIT_TPR_ACCESS; @@ -2781,21 +2783,13 @@ again: local_irq_disable(); - if (need_resched()) { + if (vcpu->requests || need_resched()) { local_irq_enable(); preempt_enable(); r = 1; goto out; } - if (vcpu->requests) - if (test_bit(KVM_REQ_MMU_RELOAD, &vcpu->requests)) { - local_irq_enable(); - preempt_enable(); - r = 1; - goto out; - } - if (signal_pending(current)) { local_irq_enable(); preempt_enable(); @@ -2825,9 +2819,6 @@ again: kvm_guest_enter(); - if (vcpu->requests) - if (test_and_clear_bit(KVM_REQ_TLB_FLUSH, &vcpu->requests)) - kvm_x86_ops->tlb_flush(vcpu); KVMTRACE_0D(VMENTRY, vcpu, entryexit); kvm_x86_ops->run(vcpu, kvm_run); -- cgit v0.10.2 From 06e05645661211b9eaadaf6344c335d2e80f0ba2 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Fri, 6 Jun 2008 16:37:36 -0300 Subject: KVM: close timer injection race window in __vcpu_run If a timer fires after kvm_inject_pending_timer_irqs() but before local_irq_disable() the code will enter guest mode and only inject such timer interrupt the next time an unrelated event causes an exit. It would be simpler if the timer->pending irq conversion could be done with IRQ's disabled, so that the above problem cannot happen. For now introduce a new vcpu requests bit to cancel guest entry. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c index f2f5d26..3829aa7 100644 --- a/arch/x86/kvm/i8254.c +++ b/arch/x86/kvm/i8254.c @@ -200,9 +200,12 @@ int __pit_timer_fn(struct kvm_kpit_state *ps) atomic_inc(&pt->pending); smp_mb__after_atomic_inc(); - if (vcpu0 && waitqueue_active(&vcpu0->wq)) { - vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE; - wake_up_interruptible(&vcpu0->wq); + if (vcpu0) { + set_bit(KVM_REQ_PENDING_TIMER, &vcpu0->requests); + if (waitqueue_active(&vcpu0->wq)) { + vcpu0->arch.mp_state = KVM_MP_STATE_RUNNABLE; + wake_up_interruptible(&vcpu0->wq); + } } pt->timer.expires = ktime_add_ns(pt->timer.expires, pt->period); diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c index c297c50..ebc03f5 100644 --- a/arch/x86/kvm/lapic.c +++ b/arch/x86/kvm/lapic.c @@ -940,6 +940,7 @@ static int __apic_timer_fn(struct kvm_lapic *apic) wait_queue_head_t *q = &apic->vcpu->wq; atomic_inc(&apic->timer.pending); + set_bit(KVM_REQ_PENDING_TIMER, &apic->vcpu->requests); if (waitqueue_active(q)) { apic->vcpu->arch.mp_state = KVM_MP_STATE_RUNNABLE; wake_up_interruptible(q); diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b90744a..b08812d 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -2774,6 +2774,7 @@ again: } } + clear_bit(KVM_REQ_PENDING_TIMER, &vcpu->requests); kvm_inject_pending_timer_irqs(vcpu); preempt_disable(); diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 092b1b2..de9d1df 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -33,6 +33,7 @@ #define KVM_REQ_REPORT_TPR_ACCESS 2 #define KVM_REQ_MMU_RELOAD 3 #define KVM_REQ_TRIPLE_FAULT 4 +#define KVM_REQ_PENDING_TIMER 5 struct kvm_vcpu; extern struct kmem_cache *kvm_vcpu_cache; -- cgit v0.10.2 From 6597ca09e6c0e5aec7ffd2b8ab48c671d3c28414 Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Sun, 8 Jun 2008 01:48:53 -0300 Subject: KVM: MMU: Fix rmap_write_protect() hugepage iteration bug rmap_next() does not work correctly after rmap_remove(), as it expects the rmap chains not to change during iteration. Fix (for now) by restarting iteration from the beginning. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index ee3f530..9628091 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -640,6 +640,7 @@ static void rmap_write_protect(struct kvm *kvm, u64 gfn) rmap_remove(kvm, spte); --kvm->stat.lpages; set_shadow_pte(spte, shadow_trap_nonpresent_pte); + spte = NULL; write_protected = 1; } spte = rmap_next(kvm, rmapp, spte); -- cgit v0.10.2 From 3094538739415a9225afd2a6c78cb0fe1c1f641b Mon Sep 17 00:00:00 2001 From: Marcelo Tosatti Date: Wed, 11 Jun 2008 20:32:40 -0300 Subject: KVM: MMU: large page update_pte issue with non-PAE 32-bit guests (resend) kvm_mmu_pte_write() does not handle 32-bit non-PAE large page backed guests properly. It will instantiate two 2MB sptes pointing to the same physical 2MB page when a guest large pte update is trapped. Instead of duplicating code to handle this, disallow directory level updates to happen through kvm_mmu_pte_write(), so the two 2MB sptes emulating one guest 4MB pte can be correctly created by the page fault handling path. Signed-off-by: Marcelo Tosatti Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 9628091..baa6503 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1581,11 +1581,13 @@ static void mmu_pte_write_new_pte(struct kvm_vcpu *vcpu, u64 *spte, const void *new) { - if ((sp->role.level != PT_PAGE_TABLE_LEVEL) - && !vcpu->arch.update_pte.largepage) { - ++vcpu->kvm->stat.mmu_pde_zapped; - return; - } + if (sp->role.level != PT_PAGE_TABLE_LEVEL) { + if (!vcpu->arch.update_pte.largepage || + sp->role.glevels == PT32_ROOT_LEVEL) { + ++vcpu->kvm->stat.mmu_pde_zapped; + return; + } + } ++vcpu->kvm->stat.mmu_pte_updated; if (sp->role.glevels == PT32_ROOT_LEVEL) -- cgit v0.10.2 From 6bf6a9532fd03ad719f0c86654f16ef777b78fc6 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Thu, 12 Jun 2008 16:54:41 +0300 Subject: KVM: MMU: Fix oops on guest userspace access to guest pagetable KVM has a heuristic to unshadow guest pagetables when userspace accesses them, on the assumption that most guests do not allow userspace to access pagetables directly. Unfortunately, in addition to unshadowing the pagetables, it also oopses. This never triggers on ordinary guests since sane OSes will clear the pagetables before assigning them to userspace, which will trigger the flood heuristic, unshadowing the pagetables before the first userspace access. One particular guest, though (Xenner) will run the kernel in userspace, triggering the oops. Since the heuristic is incorrect in this case, we can simply remove it. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index baa6503..7e7c396 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -1083,10 +1083,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte, struct kvm_mmu_page *shadow; spte |= PT_WRITABLE_MASK; - if (user_fault) { - mmu_unshadow(vcpu->kvm, gfn); - goto unshadowed; - } shadow = kvm_mmu_lookup_page(vcpu->kvm, gfn); if (shadow || @@ -1103,8 +1099,6 @@ static void mmu_set_spte(struct kvm_vcpu *vcpu, u64 *shadow_pte, } } -unshadowed: - if (pte_access & ACC_WRITE_MASK) mark_page_dirty(vcpu->kvm, gfn); -- cgit v0.10.2 From 4fa6b9c5dc4134bdeac341d731a87783cc11ca10 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 17 Jun 2008 15:36:36 -0700 Subject: KVM: ioapic: fix lost interrupt when changing a device's irq The ioapic acknowledge path translates interrupt vectors to irqs. It currently uses a first match algorithm, stopping when it finds the first redirection table entry containing the vector. That fails however if the guest changes the irq to a different line, leaving the old redirection table entry in place (though masked). Result is interrupts not making it to the guest. Fix by always scanning the entire redirection table. Signed-off-by: Avi Kivity diff --git a/virt/kvm/ioapic.c b/virt/kvm/ioapic.c index 98778cb..1dcf9f3 100644 --- a/virt/kvm/ioapic.c +++ b/virt/kvm/ioapic.c @@ -269,28 +269,9 @@ void kvm_ioapic_set_irq(struct kvm_ioapic *ioapic, int irq, int level) } } -static int get_eoi_gsi(struct kvm_ioapic *ioapic, int vector) +static void __kvm_ioapic_update_eoi(struct kvm_ioapic *ioapic, int gsi) { - int i; - - for (i = 0; i < IOAPIC_NUM_PINS; i++) - if (ioapic->redirtbl[i].fields.vector == vector) - return i; - return -1; -} - -void kvm_ioapic_update_eoi(struct kvm *kvm, int vector) -{ - struct kvm_ioapic *ioapic = kvm->arch.vioapic; union ioapic_redir_entry *ent; - int gsi; - - gsi = get_eoi_gsi(ioapic, vector); - if (gsi == -1) { - printk(KERN_WARNING "Can't find redir item for %d EOI\n", - vector); - return; - } ent = &ioapic->redirtbl[gsi]; ASSERT(ent->fields.trig_mode == IOAPIC_LEVEL_TRIG); @@ -300,6 +281,16 @@ void kvm_ioapic_update_eoi(struct kvm *kvm, int vector) ioapic_deliver(ioapic, gsi); } +void kvm_ioapic_update_eoi(struct kvm *kvm, int vector) +{ + struct kvm_ioapic *ioapic = kvm->arch.vioapic; + int i; + + for (i = 0; i < IOAPIC_NUM_PINS; i++) + if (ioapic->redirtbl[i].fields.vector == vector) + __kvm_ioapic_update_eoi(ioapic, i); +} + static int ioapic_in_range(struct kvm_io_device *this, gpa_t addr) { struct kvm_ioapic *ioapic = (struct kvm_ioapic *)this->private; -- cgit v0.10.2 From a9b21b622958afc3f3bc5a23d266dd9ed1171fd3 Mon Sep 17 00:00:00 2001 From: Avi Kivity Date: Tue, 24 Jun 2008 11:48:49 +0300 Subject: KVM: VMX: Fix host msr corruption with preemption enabled Switching msrs can occur either synchronously as a result of calls to the msr management functions (usually in response to the guest touching virtualized msrs), or asynchronously when preempting a kvm thread that has guest state loaded. If we're unlucky enough to have the two at the same time, host msrs are corrupted and the machine goes kaput on the next syscall. Most easily triggered by Windows Server 2008, as it does a lot of msr switching during bootup. Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/vmx.c b/arch/x86/kvm/vmx.c index 02efbe7..540e951 100644 --- a/arch/x86/kvm/vmx.c +++ b/arch/x86/kvm/vmx.c @@ -566,7 +566,7 @@ static void vmx_save_host_state(struct kvm_vcpu *vcpu) load_transition_efer(vmx); } -static void vmx_load_host_state(struct vcpu_vmx *vmx) +static void __vmx_load_host_state(struct vcpu_vmx *vmx) { unsigned long flags; @@ -596,6 +596,13 @@ static void vmx_load_host_state(struct vcpu_vmx *vmx) reload_host_efer(vmx); } +static void vmx_load_host_state(struct vcpu_vmx *vmx) +{ + preempt_disable(); + __vmx_load_host_state(vmx); + preempt_enable(); +} + /* * Switches to specified vcpu, until a matching vcpu_put(), but assumes * vcpu mutex is already taken. @@ -654,7 +661,7 @@ static void vmx_vcpu_load(struct kvm_vcpu *vcpu, int cpu) static void vmx_vcpu_put(struct kvm_vcpu *vcpu) { - vmx_load_host_state(to_vmx(vcpu)); + __vmx_load_host_state(to_vmx(vcpu)); } static void vmx_fpu_activate(struct kvm_vcpu *vcpu) @@ -884,11 +891,8 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) switch (msr_index) { #ifdef CONFIG_X86_64 case MSR_EFER: + vmx_load_host_state(vmx); ret = kvm_set_msr_common(vcpu, msr_index, data); - if (vmx->host_state.loaded) { - reload_host_efer(vmx); - load_transition_efer(vmx); - } break; case MSR_FS_BASE: vmcs_writel(GUEST_FS_BASE, data); @@ -910,11 +914,10 @@ static int vmx_set_msr(struct kvm_vcpu *vcpu, u32 msr_index, u64 data) guest_write_tsc(data); break; default: + vmx_load_host_state(vmx); msr = find_msr_entry(vmx, msr_index); if (msr) { msr->data = data; - if (vmx->host_state.loaded) - load_msrs(vmx->guest_msrs, vmx->save_nmsrs); break; } ret = kvm_set_msr_common(vcpu, msr_index, data); -- cgit v0.10.2 From e8183c2452041326c95258ecc7865b6fcd91c730 Mon Sep 17 00:00:00 2001 From: Tomas Janousek Date: Mon, 23 Jun 2008 15:12:35 +0200 Subject: udf: Fix regression in UDF anchor block detection In some cases it could happen that some block passed test in udf_check_anchor_block() even though udf_read_tagged() refused to read it later (e.g. because checksum was not correct). This patch makes udf_check_anchor_block() use udf_read_tagged() so that the checking is stricter. This fixes the regression (certain disks unmountable) caused by commit 423cf6dc04eb79d441bfda2b127bc4b57134b41d. Signed-off-by: Tomas Janousek Signed-off-by: Jan Kara diff --git a/fs/udf/super.c b/fs/udf/super.c index 7a5f69b..44cc702 100644 --- a/fs/udf/super.c +++ b/fs/udf/super.c @@ -682,38 +682,26 @@ static int udf_vrs(struct super_block *sb, int silent) /* * Check whether there is an anchor block in the given block */ -static int udf_check_anchor_block(struct super_block *sb, sector_t block, - bool varconv) +static int udf_check_anchor_block(struct super_block *sb, sector_t block) { - struct buffer_head *bh = NULL; - tag *t; + struct buffer_head *bh; uint16_t ident; - uint32_t location; - if (varconv) { - if (udf_fixed_to_variable(block) >= - sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits) - return 0; - bh = sb_bread(sb, udf_fixed_to_variable(block)); - } - else - bh = sb_bread(sb, block); + if (UDF_QUERY_FLAG(sb, UDF_FLAG_VARCONV) && + udf_fixed_to_variable(block) >= + sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits) + return 0; + bh = udf_read_tagged(sb, block, block, &ident); if (!bh) return 0; - - t = (tag *)bh->b_data; - ident = le16_to_cpu(t->tagIdent); - location = le32_to_cpu(t->tagLocation); brelse(bh); - if (ident != TAG_IDENT_AVDP) - return 0; - return location == block; + + return ident == TAG_IDENT_AVDP; } /* Search for an anchor volume descriptor pointer */ -static sector_t udf_scan_anchors(struct super_block *sb, bool varconv, - sector_t lastblock) +static sector_t udf_scan_anchors(struct super_block *sb, sector_t lastblock) { sector_t last[6]; int i; @@ -739,7 +727,7 @@ static sector_t udf_scan_anchors(struct super_block *sb, bool varconv, sb->s_blocksize_bits) continue; - if (udf_check_anchor_block(sb, last[i], varconv)) { + if (udf_check_anchor_block(sb, last[i])) { sbi->s_anchor[0] = last[i]; sbi->s_anchor[1] = last[i] - 256; return last[i]; @@ -748,17 +736,17 @@ static sector_t udf_scan_anchors(struct super_block *sb, bool varconv, if (last[i] < 256) continue; - if (udf_check_anchor_block(sb, last[i] - 256, varconv)) { + if (udf_check_anchor_block(sb, last[i] - 256)) { sbi->s_anchor[1] = last[i] - 256; return last[i]; } } - if (udf_check_anchor_block(sb, sbi->s_session + 256, varconv)) { + if (udf_check_anchor_block(sb, sbi->s_session + 256)) { sbi->s_anchor[0] = sbi->s_session + 256; return last[0]; } - if (udf_check_anchor_block(sb, sbi->s_session + 512, varconv)) { + if (udf_check_anchor_block(sb, sbi->s_session + 512)) { sbi->s_anchor[0] = sbi->s_session + 512; return last[0]; } @@ -780,23 +768,24 @@ static void udf_find_anchor(struct super_block *sb) int i; struct udf_sb_info *sbi = UDF_SB(sb); - lastblock = udf_scan_anchors(sb, 0, sbi->s_last_block); + lastblock = udf_scan_anchors(sb, sbi->s_last_block); if (lastblock) goto check_anchor; /* No anchor found? Try VARCONV conversion of block numbers */ + UDF_SET_FLAG(sb, UDF_FLAG_VARCONV); /* Firstly, we try to not convert number of the last block */ - lastblock = udf_scan_anchors(sb, 1, + lastblock = udf_scan_anchors(sb, udf_variable_to_fixed(sbi->s_last_block)); - if (lastblock) { - UDF_SET_FLAG(sb, UDF_FLAG_VARCONV); + if (lastblock) goto check_anchor; - } /* Secondly, we try with converted number of the last block */ - lastblock = udf_scan_anchors(sb, 1, sbi->s_last_block); - if (lastblock) - UDF_SET_FLAG(sb, UDF_FLAG_VARCONV); + lastblock = udf_scan_anchors(sb, sbi->s_last_block); + if (!lastblock) { + /* VARCONV didn't help. Clear it. */ + UDF_CLEAR_FLAG(sb, UDF_FLAG_VARCONV); + } check_anchor: /* -- cgit v0.10.2 From 63842cccb285259345f52025ef57bdfd79657a2d Mon Sep 17 00:00:00 2001 From: Wim Van Sebroeck Date: Tue, 24 Jun 2008 13:09:26 +0000 Subject: Revert "[WATCHDOG] hpwdt: Add CFLAGS to get driver working" After Linus fixed the inline assembly, the CFLAGS option is not needed anymore. Signed-off-by: Thomas Mingarelli Signed-off-by: Wim Van Sebroeck diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile index 8662a6b..25b352b 100644 --- a/drivers/watchdog/Makefile +++ b/drivers/watchdog/Makefile @@ -68,7 +68,6 @@ obj-$(CONFIG_WAFER_WDT) += wafer5823wdt.o obj-$(CONFIG_I6300ESB_WDT) += i6300esb.o obj-$(CONFIG_ITCO_WDT) += iTCO_wdt.o iTCO_vendor_support.o obj-$(CONFIG_IT8712F_WDT) += it8712f_wdt.o -CFLAGS_hpwdt.o += -O obj-$(CONFIG_HP_WATCHDOG) += hpwdt.o obj-$(CONFIG_SC1200_WDT) += sc1200wdt.o obj-$(CONFIG_SCx200_WDT) += scx200_wdt.o -- cgit v0.10.2 From 17c15da00c0e7289375ad57e8fea0c7892b74aa0 Mon Sep 17 00:00:00 2001 From: Bob Peterson Date: Wed, 18 Jun 2008 11:30:40 -0500 Subject: [GFS2] BUG: unable to handle kernel paging request at ffff81002690e000 This patch fixes bugzilla bug bz448866: gfs2: BUG: unable to handle kernel paging request at ffff81002690e000. Signed-off-by: Bob Peterson Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index 6387523..3401628 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -195,7 +195,7 @@ ulong_aligned: depending on architecture. I've experimented with several ways of writing this section such as using an else before the goto but this one seems to be the fastest. */ - while ((unsigned char *)plong < end - 1) { + while ((unsigned char *)plong < end - sizeof(unsigned long)) { prefetch(plong + 1); if (((*plong) & LBITMASK) != lskipval) break; -- cgit v0.10.2 From 28499143933f19b28008a556ed59255d6009391a Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Fri, 9 May 2008 12:05:57 +0100 Subject: xen: remove support for non-PAE 32-bit Non-PAE operation has been deprecated in Xen for a while, and is rarely tested or used. xen-unstable has now officially dropped non-PAE support. Since Xen/pvops' non-PAE support has also been broken for a while, we may as well completely drop it altogether. Signed-off-by: Jeremy Fitzhardinge Signed-off-by: Ingo Molnar Signed-off-by: Thomas Gleixner Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 2e641be..525b108 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -6,7 +6,7 @@ config XEN bool "Xen guest support" select PARAVIRT depends on X86_32 - depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) + depends on X86_CMPXCHG && X86_TSC && X86_PAE && !(X86_VISWS || X86_VOYAGER) help This is the Linux Xen port. Enabling this will allow the kernel to boot in a paravirtualized environment under the diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index c048de3..f09c1c6 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -785,38 +785,35 @@ static __init void xen_set_pte_init(pte_t *ptep, pte_t pte) static __init void xen_pagetable_setup_start(pgd_t *base) { pgd_t *xen_pgd = (pgd_t *)xen_start_info->pt_base; + int i; /* special set_pte for pagetable initialization */ pv_mmu_ops.set_pte = xen_set_pte_init; init_mm.pgd = base; /* - * copy top-level of Xen-supplied pagetable into place. For - * !PAE we can use this as-is, but for PAE it is a stand-in - * while we copy the pmd pages. + * copy top-level of Xen-supplied pagetable into place. This + * is a stand-in while we copy the pmd pages. */ memcpy(base, xen_pgd, PTRS_PER_PGD * sizeof(pgd_t)); - if (PTRS_PER_PMD > 1) { - int i; - /* - * For PAE, need to allocate new pmds, rather than - * share Xen's, since Xen doesn't like pmd's being - * shared between address spaces. - */ - for (i = 0; i < PTRS_PER_PGD; i++) { - if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { - pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); + /* + * For PAE, need to allocate new pmds, rather than + * share Xen's, since Xen doesn't like pmd's being + * shared between address spaces. + */ + for (i = 0; i < PTRS_PER_PGD; i++) { + if (pgd_val_ma(xen_pgd[i]) & _PAGE_PRESENT) { + pmd_t *pmd = (pmd_t *)alloc_bootmem_low_pages(PAGE_SIZE); - memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), - PAGE_SIZE); + memcpy(pmd, (void *)pgd_page_vaddr(xen_pgd[i]), + PAGE_SIZE); - make_lowmem_page_readonly(pmd); + make_lowmem_page_readonly(pmd); - set_pgd(&base[i], __pgd(1 + __pa(pmd))); - } else - pgd_clear(&base[i]); - } + set_pgd(&base[i], __pgd(1 + __pa(pmd))); + } else + pgd_clear(&base[i]); } /* make sure zero_page is mapped RO so we can use it in pagetables */ @@ -873,17 +870,7 @@ static __init void xen_pagetable_setup_done(pgd_t *base) /* Actually pin the pagetable down, but we can't set PG_pinned yet because the page structures don't exist yet. */ - { - unsigned level; - -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - pin_pagetable_pfn(level, PFN_DOWN(__pa(base))); - } + pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(base))); } /* This is called once we have the cpu_possible_map */ @@ -1093,7 +1080,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pte = xen_make_pte, .make_pgd = xen_make_pgd, -#ifdef CONFIG_X86_PAE .set_pte_atomic = xen_set_pte_atomic, .set_pte_present = xen_set_pte_at, .set_pud = xen_set_pud, @@ -1102,7 +1088,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .make_pmd = xen_make_pmd, .pmd_val = xen_pmd_val, -#endif /* PAE */ .activate_mm = xen_activate_mm, .dup_mmap = xen_dup_mmap, diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 265601d..df40bf7 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -228,7 +228,7 @@ pmdval_t xen_pmd_val(pmd_t pmd) { return pte_mfn_to_pfn(pmd.pmd); } -#ifdef CONFIG_X86_PAE + void xen_set_pud(pud_t *ptr, pud_t val) { struct multicall_space mcs; @@ -276,12 +276,6 @@ pmd_t xen_make_pmd(pmdval_t pmd) pmd = pte_pfn_to_mfn(pmd); return native_make_pmd(pmd); } -#else /* !PAE */ -void xen_set_pte(pte_t *ptep, pte_t pte) -{ - *ptep = pte; -} -#endif /* CONFIG_X86_PAE */ /* (Yet another) pagetable walker. This one is intended for pinning a @@ -434,8 +428,6 @@ static int pin_page(struct page *page, enum pt_level level) read-only, and can be pinned. */ void xen_pgd_pin(pgd_t *pgd) { - unsigned level; - xen_mc_batch(); if (pgd_walk(pgd, pin_page, TASK_SIZE)) { @@ -445,14 +437,7 @@ void xen_pgd_pin(pgd_t *pgd) xen_mc_batch(); } -#ifdef CONFIG_X86_PAE - level = MMUEXT_PIN_L3_TABLE; -#else - level = MMUEXT_PIN_L2_TABLE; -#endif - - xen_do_pin(level, PFN_DOWN(__pa(pgd))); - + xen_do_pin(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(pgd))); xen_mc_issue(0); } diff --git a/arch/x86/xen/mmu.h b/arch/x86/xen/mmu.h index b5e189b..5fe961c 100644 --- a/arch/x86/xen/mmu.h +++ b/arch/x86/xen/mmu.h @@ -37,14 +37,13 @@ void xen_exit_mmap(struct mm_struct *mm); void xen_pgd_pin(pgd_t *pgd); //void xen_pgd_unpin(pgd_t *pgd); -#ifdef CONFIG_X86_PAE -unsigned long long xen_pte_val(pte_t); -unsigned long long xen_pmd_val(pmd_t); -unsigned long long xen_pgd_val(pgd_t); +pteval_t xen_pte_val(pte_t); +pmdval_t xen_pmd_val(pmd_t); +pgdval_t xen_pgd_val(pgd_t); -pte_t xen_make_pte(unsigned long long); -pmd_t xen_make_pmd(unsigned long long); -pgd_t xen_make_pgd(unsigned long long); +pte_t xen_make_pte(pteval_t); +pmd_t xen_make_pmd(pmdval_t); +pgd_t xen_make_pgd(pgdval_t); void xen_set_pte_at(struct mm_struct *mm, unsigned long addr, pte_t *ptep, pte_t pteval); @@ -53,15 +52,4 @@ void xen_set_pud(pud_t *ptr, pud_t val); void xen_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep); void xen_pmd_clear(pmd_t *pmdp); - -#else -unsigned long xen_pte_val(pte_t); -unsigned long xen_pmd_val(pmd_t); -unsigned long xen_pgd_val(pgd_t); - -pte_t xen_make_pte(unsigned long); -pmd_t xen_make_pmd(unsigned long); -pgd_t xen_make_pgd(unsigned long); -#endif - #endif /* _XEN_MMU_H */ diff --git a/arch/x86/xen/xen-head.S b/arch/x86/xen/xen-head.S index 3175e97..6ec3b4f 100644 --- a/arch/x86/xen/xen-head.S +++ b/arch/x86/xen/xen-head.S @@ -30,11 +30,7 @@ ENTRY(hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_ENTRY, .long startup_xen) ELFNOTE(Xen, XEN_ELFNOTE_HYPERCALL_PAGE, .long hypercall_page) ELFNOTE(Xen, XEN_ELFNOTE_FEATURES, .asciz "!writable_page_tables|pae_pgdir_above_4gb") -#ifdef CONFIG_X86_PAE ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "yes") -#else - ELFNOTE(Xen, XEN_ELFNOTE_PAE_MODE, .asciz "no") -#endif ELFNOTE(Xen, XEN_ELFNOTE_LOADER, .asciz "generic") #endif /*CONFIG_XEN */ diff --git a/include/asm-x86/xen/page.h b/include/asm-x86/xen/page.h index baf3a4d..e11f240 100644 --- a/include/asm-x86/xen/page.h +++ b/include/asm-x86/xen/page.h @@ -150,13 +150,9 @@ static inline pte_t __pte_ma(pteval_t x) return (pte_t) { .pte = x }; } -#ifdef CONFIG_X86_PAE #define pmd_val_ma(v) ((v).pmd) #define pud_val_ma(v) ((v).pgd.pgd) #define __pmd_ma(x) ((pmd_t) { (x) } ) -#else /* !X86_PAE */ -#define pmd_val_ma(v) ((v).pud.pgd.pgd) -#endif /* CONFIG_X86_PAE */ #define pgd_val_ma(x) ((x).pgd) -- cgit v0.10.2 From a606b5e24b7e2937604f4c85023d8d9c5ab0a28b Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 24 Jun 2008 10:52:55 -0500 Subject: kgdb: documentation update - remove kgdboe kgdboe is not presently included kgdb, and there should be no references to it. Also fix the tcp port terminal connection example. Signed-off-by: Jason Wessel diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl index 028a844..e8acd1f 100644 --- a/Documentation/DocBook/kgdb.tmpl +++ b/Documentation/DocBook/kgdb.tmpl @@ -84,10 +84,9 @@ runs an instance of gdb against the vmlinux file which contains the symbols (not boot image such as bzImage, zImage, uImage...). In gdb the developer specifies the connection parameters and - connects to kgdb. Depending on which kgdb I/O modules exist in - the kernel for a given architecture, it may be possible to debug - the test machine's kernel with the development machine using a - rs232 or ethernet connection. + connects to kgdb. The type of connection a developer makes with + gdb depends on the availability of kgdb I/O modules compiled as + builtin's or kernel modules in the test machine's kernel. @@ -223,7 +222,7 @@ IMPORTANT NOTE: Using this option with kgdb over the console - (kgdboc) or kgdb over ethernet (kgdboe) is not supported. + (kgdboc) is not supported. @@ -249,18 +248,11 @@ (gdb) target remote /dev/ttyS0 - Example (kgdb to a terminal server): + Example (kgdb to a terminal server on tcp port 2012): % gdb ./vmlinux - (gdb) target remote udp:192.168.2.2:6443 - - - Example (kgdb over ethernet): - - - % gdb ./vmlinux - (gdb) target remote udp:192.168.2.2:6443 + (gdb) target remote 192.168.2.2:2012 Once connected, you can debug a kernel the way you would debug an -- cgit v0.10.2 From aabdc3b8c3b3d081f1532454e344208338478e29 Mon Sep 17 00:00:00 2001 From: Jason Wessel Date: Tue, 24 Jun 2008 10:52:55 -0500 Subject: kgdb: sparse fix - Fix warning reported by sparse kernel/kgdb.c:1502:6: warning: symbol 'kgdb_console_write' was not declared. Should it be static? Signed-off-by: Jason Wessel diff --git a/kernel/kgdb.c b/kernel/kgdb.c index 79e3c90..3ec23c3 100644 --- a/kernel/kgdb.c +++ b/kernel/kgdb.c @@ -1499,7 +1499,8 @@ int kgdb_nmicallback(int cpu, void *regs) return 1; } -void kgdb_console_write(struct console *co, const char *s, unsigned count) +static void kgdb_console_write(struct console *co, const char *s, + unsigned count) { unsigned long flags; -- cgit v0.10.2 From c95e62ce8905aab62fed224eaaa9b8558a0ef652 Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Mon, 23 Jun 2008 09:14:31 -0600 Subject: [SCSI] ses: Fix timeout Timeouts are measured in jiffies, not in seconds. Signed-off-by: Matthew Wilcox Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/ses.c b/drivers/scsi/ses.c index 45df83b..0fe031f 100644 --- a/drivers/scsi/ses.c +++ b/drivers/scsi/ses.c @@ -61,7 +61,7 @@ static int ses_probe(struct device *dev) return err; } -#define SES_TIMEOUT 30 +#define SES_TIMEOUT (30 * HZ) #define SES_RETRIES 3 static int ses_recv_diag(struct scsi_device *sdev, int page_code, -- cgit v0.10.2 From 2826f8c0f4c97b7db33e2a680f184d828eb7a785 Mon Sep 17 00:00:00 2001 From: Jes Sorensen Date: Tue, 24 Jun 2008 11:30:09 -0400 Subject: [IA64] Fix boot failure on ia64/sn2 Call check_sal_cache_flush() after platform_setup() as check_sal_cache_flush() now relies on being able to call platform vector code. Problem was introduced by: 3463a93def55c309f3c0d0a8aaf216be3be42d64 "Update check_sal_cache_flush to use platform_send_ipi()" Signed-off-by: Jes Sorensen Tested-by: Alex Chiang: Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index f48a809..4ae15c8 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -578,8 +578,6 @@ setup_arch (char **cmdline_p) cpu_init(); /* initialize the bootstrap CPU */ mmu_context_init(); /* initialize context_id bitmap */ - check_sal_cache_flush(); - #ifdef CONFIG_ACPI acpi_boot_init(); #endif @@ -607,6 +605,7 @@ setup_arch (char **cmdline_p) ia64_mca_init(); platform_setup(cmdline_p); + check_sal_cache_flush(); paging_init(); } -- cgit v0.10.2 From 8097110d179b874d91c6495330c2b96c991e8c6e Mon Sep 17 00:00:00 2001 From: Cliff Wickman Date: Tue, 24 Jun 2008 10:20:06 -0700 Subject: [IA64] Handle count==0 in sn2_ptc_proc_write() The fix applied in e0c6d97c65e0784aade7e97b9411f245a6c543e7 "security hole in sn2_ptc_proc_write" didn't take into account the case where count==0 (which results in a buffer underrun when adding the trailing '\0'). Thanks to Andi Kleen for pointing this out. Signed-off-by: Cliff Wickman Signed-off-by: Tony Luck diff --git a/arch/ia64/sn/kernel/sn2/sn2_smp.c b/arch/ia64/sn/kernel/sn2/sn2_smp.c index 6dd886c..e585f9a 100644 --- a/arch/ia64/sn/kernel/sn2/sn2_smp.c +++ b/arch/ia64/sn/kernel/sn2/sn2_smp.c @@ -512,7 +512,7 @@ static ssize_t sn2_ptc_proc_write(struct file *file, const char __user *user, si int cpu; char optstr[64]; - if (count > sizeof(optstr)) + if (count == 0 || count > sizeof(optstr)) return -EINVAL; if (copy_from_user(optstr, user, count)) return -EFAULT; -- cgit v0.10.2 From e2569b7e572c0e6782380b3fdda901deb175d75a Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Tue, 24 Jun 2008 10:22:05 +0200 Subject: [IA64] Eliminate NULL test after alloc_bootmem in iosapic_alloc_rte() As noted by Akinobu Mita alloc_bootmem and related functions never return NULL and always return a zeroed region of memory. Thus a NULL test or memset after calls to these functions is unnecessary. Signed-off-by: Julia Lawall Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 082c31d..39752cd 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -558,8 +558,6 @@ static struct iosapic_rte_info * __init_refok iosapic_alloc_rte (void) if (!iosapic_kmalloc_ok && list_empty(&free_rte_list)) { rte = alloc_bootmem(sizeof(struct iosapic_rte_info) * NR_PREALLOCATE_RTE_ENTRIES); - if (!rte) - return NULL; for (i = 0; i < NR_PREALLOCATE_RTE_ENTRIES; i++, rte++) list_add(&rte->rte_list, &free_rte_list); } -- cgit v0.10.2 From 5af4e7a0bea715f2dd7190859a43eb2258b1f388 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Tue, 24 Jun 2008 12:53:38 -0500 Subject: [GFS2] fix gfs2 block allocation (cleaned up) This patch fixes bz 450641. This patch changes the computation for zero_metapath_length(), which it renames to metapath_branch_start(). When you are extending the metadata tree, The indirect blocks that point to the new data block must either diverge from the existing tree either at the inode, or at the first indirect block. They can diverge at the first indirect block because the inode has room for 483 pointers while the indirect blocks have room for 509 pointers, so when the tree is grown, there is some free space in the first indirect block. What metapath_branch_start() now computes is the height where the first indirect block for the new data block is located. It can either be 1 (if the indirect block diverges from the inode) or 2 (if it diverges from the first indirect block). Signed-off-by: Benjamin Marzinski Signed-off-by: Steven Whitehouse diff --git a/fs/gfs2/bmap.c b/fs/gfs2/bmap.c index c19184f..bec76b1 100644 --- a/fs/gfs2/bmap.c +++ b/fs/gfs2/bmap.c @@ -246,15 +246,11 @@ static void find_metapath(const struct gfs2_sbd *sdp, u64 block, } -static inline unsigned int zero_metapath_length(const struct metapath *mp, - unsigned height) +static inline unsigned int metapath_branch_start(const struct metapath *mp) { - unsigned int i; - for (i = 0; i < height - 1; i++) { - if (mp->mp_list[i] != 0) - return i; - } - return height; + if (mp->mp_list[0] == 0) + return 2; + return 1; } /** @@ -436,7 +432,7 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, struct gfs2_sbd *sdp = GFS2_SB(inode); struct buffer_head *dibh = mp->mp_bh[0]; u64 bn, dblock = 0; - unsigned n, i, blks, alloced = 0, iblks = 0, zmpl = 0; + unsigned n, i, blks, alloced = 0, iblks = 0, branch_start = 0; unsigned dblks = 0; unsigned ptrs_per_blk; const unsigned end_of_metadata = height - 1; @@ -471,9 +467,8 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, /* Building up tree height */ state = ALLOC_GROW_HEIGHT; iblks = height - ip->i_height; - zmpl = zero_metapath_length(mp, height); - iblks -= zmpl; - iblks += height; + branch_start = metapath_branch_start(mp); + iblks += (height - branch_start); } } @@ -509,13 +504,13 @@ static int gfs2_bmap_alloc(struct inode *inode, const sector_t lblock, sizeof(struct gfs2_meta_header)); *ptr = zero_bn; state = ALLOC_GROW_DEPTH; - for(i = zmpl; i < height; i++) { + for(i = branch_start; i < height; i++) { if (mp->mp_bh[i] == NULL) break; brelse(mp->mp_bh[i]); mp->mp_bh[i] = NULL; } - i = zmpl; + i = branch_start; } if (n == 0) break; -- cgit v0.10.2 From 7af192c954017499ec163bc9dbaaee2e593d7ef2 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:29 +0200 Subject: x86: Add structs and functions for paravirt clocksource This patch adds structs for the paravirt clocksource ABI used by both xen and kvm (pvclock-abi.h). It also adds some helper functions to read system time and wall clock time from a paravirtual clocksource (pvclock.[ch]). They are based on the xen code. They are enabled using CONFIG_PARAVIRT_CLOCK. Subsequent patches of this series will put the code in use. Signed-off-by: Gerd Hoffmann Acked-by: Jeremy Fitzhardinge Signed-off-by: Avi Kivity diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 52e18e6..f94bca6 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -410,6 +410,10 @@ config PARAVIRT over full virtualization. However, when run without a hypervisor the kernel is theoretically slower and slightly larger. +config PARAVIRT_CLOCK + bool + default n + endif config MEMTEST_BOOTPARAM diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 5e618c3..77807d4 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -82,6 +82,7 @@ obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o obj-$(CONFIG_KVM_GUEST) += kvm.o obj-$(CONFIG_KVM_CLOCK) += kvmclock.o obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o +obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o diff --git a/arch/x86/kernel/pvclock.c b/arch/x86/kernel/pvclock.c new file mode 100644 index 0000000..05fbe9a --- /dev/null +++ b/arch/x86/kernel/pvclock.c @@ -0,0 +1,141 @@ +/* paravirtual clock -- common code used by kvm/xen + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +*/ + +#include +#include +#include + +/* + * These are perodically updated + * xen: magic shared_info page + * kvm: gpa registered via msr + * and then copied here. + */ +struct pvclock_shadow_time { + u64 tsc_timestamp; /* TSC at last update of time vals. */ + u64 system_timestamp; /* Time, in nanosecs, since boot. */ + u32 tsc_to_nsec_mul; + int tsc_shift; + u32 version; +}; + +/* + * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, + * yielding a 64-bit result. + */ +static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) +{ + u64 product; +#ifdef __i386__ + u32 tmp1, tmp2; +#endif + + if (shift < 0) + delta >>= -shift; + else + delta <<= shift; + +#ifdef __i386__ + __asm__ ( + "mul %5 ; " + "mov %4,%%eax ; " + "mov %%edx,%4 ; " + "mul %5 ; " + "xor %5,%5 ; " + "add %4,%%eax ; " + "adc %5,%%edx ; " + : "=A" (product), "=r" (tmp1), "=r" (tmp2) + : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); +#elif __x86_64__ + __asm__ ( + "mul %%rdx ; shrd $32,%%rdx,%%rax" + : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); +#else +#error implement me! +#endif + + return product; +} + +static u64 pvclock_get_nsec_offset(struct pvclock_shadow_time *shadow) +{ + u64 delta = native_read_tsc() - shadow->tsc_timestamp; + return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift); +} + +/* + * Reads a consistent set of time-base values from hypervisor, + * into a shadow data area. + */ +static unsigned pvclock_get_time_values(struct pvclock_shadow_time *dst, + struct pvclock_vcpu_time_info *src) +{ + do { + dst->version = src->version; + rmb(); /* fetch version before data */ + dst->tsc_timestamp = src->tsc_timestamp; + dst->system_timestamp = src->system_time; + dst->tsc_to_nsec_mul = src->tsc_to_system_mul; + dst->tsc_shift = src->tsc_shift; + rmb(); /* test version after fetching data */ + } while ((src->version & 1) || (dst->version != src->version)); + + return dst->version; +} + +cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src) +{ + struct pvclock_shadow_time shadow; + unsigned version; + cycle_t ret, offset; + + do { + version = pvclock_get_time_values(&shadow, src); + barrier(); + offset = pvclock_get_nsec_offset(&shadow); + ret = shadow.system_timestamp + offset; + barrier(); + } while (version != src->version); + + return ret; +} + +void pvclock_read_wallclock(struct pvclock_wall_clock *wall_clock, + struct pvclock_vcpu_time_info *vcpu_time, + struct timespec *ts) +{ + u32 version; + u64 delta; + struct timespec now; + + /* get wallclock at system boot */ + do { + version = wall_clock->version; + rmb(); /* fetch version before time */ + now.tv_sec = wall_clock->sec; + now.tv_nsec = wall_clock->nsec; + rmb(); /* fetch time before checking version */ + } while ((wall_clock->version & 1) || (version != wall_clock->version)); + + delta = pvclock_clocksource_read(vcpu_time); /* time since system boot */ + delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec; + + now.tv_nsec = do_div(delta, NSEC_PER_SEC); + now.tv_sec = delta; + + set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); +} diff --git a/include/asm-x86/pvclock-abi.h b/include/asm-x86/pvclock-abi.h new file mode 100644 index 0000000..6857f84 --- /dev/null +++ b/include/asm-x86/pvclock-abi.h @@ -0,0 +1,42 @@ +#ifndef _ASM_X86_PVCLOCK_ABI_H_ +#define _ASM_X86_PVCLOCK_ABI_H_ +#ifndef __ASSEMBLY__ + +/* + * These structs MUST NOT be changed. + * They are the ABI between hypervisor and guest OS. + * Both Xen and KVM are using this. + * + * pvclock_vcpu_time_info holds the system time and the tsc timestamp + * of the last update. So the guest can use the tsc delta to get a + * more precise system time. There is one per virtual cpu. + * + * pvclock_wall_clock references the point in time when the system + * time was zero (usually boot time), thus the guest calculates the + * current wall clock by adding the system time. + * + * Protocol for the "version" fields is: hypervisor raises it (making + * it uneven) before it starts updating the fields and raises it again + * (making it even) when it is done. Thus the guest can make sure the + * time values it got are consistent by checking the version before + * and after reading them. + */ + +struct pvclock_vcpu_time_info { + u32 version; + u32 pad0; + u64 tsc_timestamp; + u64 system_time; + u32 tsc_to_system_mul; + s8 tsc_shift; + u8 pad[3]; +} __attribute__((__packed__)); /* 32 bytes */ + +struct pvclock_wall_clock { + u32 version; + u32 sec; + u32 nsec; +} __attribute__((__packed__)); + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_X86_PVCLOCK_ABI_H_ */ diff --git a/include/asm-x86/pvclock.h b/include/asm-x86/pvclock.h new file mode 100644 index 0000000..85b1bba --- /dev/null +++ b/include/asm-x86/pvclock.h @@ -0,0 +1,13 @@ +#ifndef _ASM_X86_PVCLOCK_H_ +#define _ASM_X86_PVCLOCK_H_ + +#include +#include + +/* some helper functions for xen and kvm pv clock sources */ +cycle_t pvclock_clocksource_read(struct pvclock_vcpu_time_info *src); +void pvclock_read_wallclock(struct pvclock_wall_clock *wall, + struct pvclock_vcpu_time_info *vcpu, + struct timespec *ts); + +#endif /* _ASM_X86_PVCLOCK_H_ */ -- cgit v0.10.2 From 1c7b67f7576c4ca2a344379a4a29eec8fe8e7935 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:30 +0200 Subject: x86: Make xen use the paravirt clocksource structs and functions This patch updates the xen guest to use the pvclock structs and helper functions. Signed-off-by: Gerd Hoffmann Acked-by: Jeremy Fitzhardinge Signed-off-by: Avi Kivity diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig index 2e641be..3a4f16a 100644 --- a/arch/x86/xen/Kconfig +++ b/arch/x86/xen/Kconfig @@ -5,6 +5,7 @@ config XEN bool "Xen guest support" select PARAVIRT + select PARAVIRT_CLOCK depends on X86_32 depends on X86_CMPXCHG && X86_TSC && !(X86_VISWS || X86_VOYAGER) help diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 52b2e38..41e2175 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -14,6 +14,7 @@ #include #include +#include #include #include @@ -31,17 +32,6 @@ static cycle_t xen_clocksource_read(void); -/* These are perodically updated in shared_info, and then copied here. */ -struct shadow_time_info { - u64 tsc_timestamp; /* TSC at last update of time vals. */ - u64 system_timestamp; /* Time, in nanosecs, since boot. */ - u32 tsc_to_nsec_mul; - int tsc_shift; - u32 version; -}; - -static DEFINE_PER_CPU(struct shadow_time_info, shadow_time); - /* runstate info updated by Xen */ static DEFINE_PER_CPU(struct vcpu_runstate_info, runstate); @@ -211,7 +201,7 @@ unsigned long long xen_sched_clock(void) unsigned long xen_cpu_khz(void) { u64 xen_khz = 1000000ULL << 32; - const struct vcpu_time_info *info = + const struct pvclock_vcpu_time_info *info = &HYPERVISOR_shared_info->vcpu_info[0].time; do_div(xen_khz, info->tsc_to_system_mul); @@ -223,121 +213,26 @@ unsigned long xen_cpu_khz(void) return xen_khz; } -/* - * Reads a consistent set of time-base values from Xen, into a shadow data - * area. - */ -static unsigned get_time_values_from_xen(void) -{ - struct vcpu_time_info *src; - struct shadow_time_info *dst; - - /* src is shared memory with the hypervisor, so we need to - make sure we get a consistent snapshot, even in the face of - being preempted. */ - src = &__get_cpu_var(xen_vcpu)->time; - dst = &__get_cpu_var(shadow_time); - - do { - dst->version = src->version; - rmb(); /* fetch version before data */ - dst->tsc_timestamp = src->tsc_timestamp; - dst->system_timestamp = src->system_time; - dst->tsc_to_nsec_mul = src->tsc_to_system_mul; - dst->tsc_shift = src->tsc_shift; - rmb(); /* test version after fetching data */ - } while ((src->version & 1) | (dst->version ^ src->version)); - - return dst->version; -} - -/* - * Scale a 64-bit delta by scaling and multiplying by a 32-bit fraction, - * yielding a 64-bit result. - */ -static inline u64 scale_delta(u64 delta, u32 mul_frac, int shift) -{ - u64 product; -#ifdef __i386__ - u32 tmp1, tmp2; -#endif - - if (shift < 0) - delta >>= -shift; - else - delta <<= shift; - -#ifdef __i386__ - __asm__ ( - "mul %5 ; " - "mov %4,%%eax ; " - "mov %%edx,%4 ; " - "mul %5 ; " - "xor %5,%5 ; " - "add %4,%%eax ; " - "adc %5,%%edx ; " - : "=A" (product), "=r" (tmp1), "=r" (tmp2) - : "a" ((u32)delta), "1" ((u32)(delta >> 32)), "2" (mul_frac) ); -#elif __x86_64__ - __asm__ ( - "mul %%rdx ; shrd $32,%%rdx,%%rax" - : "=a" (product) : "0" (delta), "d" ((u64)mul_frac) ); -#else -#error implement me! -#endif - - return product; -} - -static u64 get_nsec_offset(struct shadow_time_info *shadow) -{ - u64 now, delta; - now = native_read_tsc(); - delta = now - shadow->tsc_timestamp; - return scale_delta(delta, shadow->tsc_to_nsec_mul, shadow->tsc_shift); -} - static cycle_t xen_clocksource_read(void) { - struct shadow_time_info *shadow = &get_cpu_var(shadow_time); + struct pvclock_vcpu_time_info *src; cycle_t ret; - unsigned version; - - do { - version = get_time_values_from_xen(); - barrier(); - ret = shadow->system_timestamp + get_nsec_offset(shadow); - barrier(); - } while (version != __get_cpu_var(xen_vcpu)->time.version); - - put_cpu_var(shadow_time); + src = &get_cpu_var(xen_vcpu)->time; + ret = pvclock_clocksource_read(src); + put_cpu_var(xen_vcpu); return ret; } static void xen_read_wallclock(struct timespec *ts) { - const struct shared_info *s = HYPERVISOR_shared_info; - u32 version; - u64 delta; - struct timespec now; - - /* get wallclock at system boot */ - do { - version = s->wc_version; - rmb(); /* fetch version before time */ - now.tv_sec = s->wc_sec; - now.tv_nsec = s->wc_nsec; - rmb(); /* fetch time before checking version */ - } while ((s->wc_version & 1) | (version ^ s->wc_version)); + struct shared_info *s = HYPERVISOR_shared_info; + struct pvclock_wall_clock *wall_clock = &(s->wc); + struct pvclock_vcpu_time_info *vcpu_time; - delta = xen_clocksource_read(); /* time since system boot */ - delta += now.tv_sec * (u64)NSEC_PER_SEC + now.tv_nsec; - - now.tv_nsec = do_div(delta, NSEC_PER_SEC); - now.tv_sec = delta; - - set_normalized_timespec(ts, now.tv_sec, now.tv_nsec); + vcpu_time = &get_cpu_var(xen_vcpu)->time; + pvclock_read_wallclock(wall_clock, vcpu_time, ts); + put_cpu_var(xen_vcpu); } unsigned long xen_get_wallclock(void) @@ -345,7 +240,6 @@ unsigned long xen_get_wallclock(void) struct timespec ts; xen_read_wallclock(&ts); - return ts.tv_sec; } @@ -569,8 +463,6 @@ __init void xen_time_init(void) { int cpu = smp_processor_id(); - get_time_values_from_xen(); - clocksource_register(&xen_clocksource); if (HYPERVISOR_vcpu_op(VCPUOP_stop_periodic_timer, cpu, NULL) == 0) { diff --git a/include/xen/interface/xen.h b/include/xen/interface/xen.h index 9b018da..819a033 100644 --- a/include/xen/interface/xen.h +++ b/include/xen/interface/xen.h @@ -10,6 +10,7 @@ #define __XEN_PUBLIC_XEN_H__ #include +#include /* * XEN "SYSTEM CALLS" (a.k.a. HYPERCALLS). @@ -336,7 +337,7 @@ struct vcpu_info { uint8_t evtchn_upcall_mask; unsigned long evtchn_pending_sel; struct arch_vcpu_info arch; - struct vcpu_time_info time; + struct pvclock_vcpu_time_info time; }; /* 64 bytes (x86) */ /* @@ -384,9 +385,7 @@ struct shared_info { * Wallclock time: updated only by control software. Guests should base * their gettimeofday() syscall on this wallclock-base value. */ - uint32_t wc_version; /* Version counter: see vcpu_time_info_t. */ - uint32_t wc_sec; /* Secs 00:00:00 UTC, Jan 1, 1970. */ - uint32_t wc_nsec; /* Nsecs 00:00:00 UTC, Jan 1, 1970. */ + struct pvclock_wall_clock wc; struct arch_shared_info arch; -- cgit v0.10.2 From 50d0a0f987b83a8dadb1134d834e35ec410392b5 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:31 +0200 Subject: KVM: Make kvm host use the paravirt clocksource structs This patch updates the kvm host code to use the pvclock structs. It also makes the paravirt clock compatible with Xen. Signed-off-by: Gerd Hoffmann Signed-off-by: Avi Kivity diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b08812d..63a77ca 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -492,8 +492,8 @@ static int do_set_msr(struct kvm_vcpu *vcpu, unsigned index, u64 *data) static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) { static int version; - struct kvm_wall_clock wc; - struct timespec wc_ts; + struct pvclock_wall_clock wc; + struct timespec now, sys, boot; if (!wall_clock) return; @@ -502,10 +502,19 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) kvm_write_guest(kvm, wall_clock, &version, sizeof(version)); - wc_ts = current_kernel_time(); - wc.wc_sec = wc_ts.tv_sec; - wc.wc_nsec = wc_ts.tv_nsec; - wc.wc_version = version; + /* + * The guest calculates current wall clock time by adding + * system time (updated by kvm_write_guest_time below) to the + * wall clock specified here. guest system time equals host + * system time for us, thus we must fill in host boot time here. + */ + now = current_kernel_time(); + ktime_get_ts(&sys); + boot = ns_to_timespec(timespec_to_ns(&now) - timespec_to_ns(&sys)); + + wc.sec = boot.tv_sec; + wc.nsec = boot.tv_nsec; + wc.version = version; kvm_write_guest(kvm, wall_clock, &wc, sizeof(wc)); @@ -513,6 +522,45 @@ static void kvm_write_wall_clock(struct kvm *kvm, gpa_t wall_clock) kvm_write_guest(kvm, wall_clock, &version, sizeof(version)); } +static uint32_t div_frac(uint32_t dividend, uint32_t divisor) +{ + uint32_t quotient, remainder; + + /* Don't try to replace with do_div(), this one calculates + * "(dividend << 32) / divisor" */ + __asm__ ( "divl %4" + : "=a" (quotient), "=d" (remainder) + : "0" (0), "1" (dividend), "r" (divisor) ); + return quotient; +} + +static void kvm_set_time_scale(uint32_t tsc_khz, struct pvclock_vcpu_time_info *hv_clock) +{ + uint64_t nsecs = 1000000000LL; + int32_t shift = 0; + uint64_t tps64; + uint32_t tps32; + + tps64 = tsc_khz * 1000LL; + while (tps64 > nsecs*2) { + tps64 >>= 1; + shift--; + } + + tps32 = (uint32_t)tps64; + while (tps32 <= (uint32_t)nsecs) { + tps32 <<= 1; + shift++; + } + + hv_clock->tsc_shift = shift; + hv_clock->tsc_to_system_mul = div_frac(nsecs, tps32); + + pr_debug("%s: tsc_khz %u, tsc_shift %d, tsc_mul %u\n", + __FUNCTION__, tsc_khz, hv_clock->tsc_shift, + hv_clock->tsc_to_system_mul); +} + static void kvm_write_guest_time(struct kvm_vcpu *v) { struct timespec ts; @@ -523,6 +571,11 @@ static void kvm_write_guest_time(struct kvm_vcpu *v) if ((!vcpu->time_page)) return; + if (unlikely(vcpu->hv_clock_tsc_khz != tsc_khz)) { + kvm_set_time_scale(tsc_khz, &vcpu->hv_clock); + vcpu->hv_clock_tsc_khz = tsc_khz; + } + /* Keep irq disabled to prevent changes to the clock */ local_irq_save(flags); kvm_get_msr(v, MSR_IA32_TIME_STAMP_COUNTER, @@ -537,14 +590,14 @@ static void kvm_write_guest_time(struct kvm_vcpu *v) /* * The interface expects us to write an even number signaling that the * update is finished. Since the guest won't see the intermediate - * state, we just write "2" at the end + * state, we just increase by 2 at the end. */ - vcpu->hv_clock.version = 2; + vcpu->hv_clock.version += 2; shared_kaddr = kmap_atomic(vcpu->time_page, KM_USER0); memcpy(shared_kaddr + vcpu->time_offset, &vcpu->hv_clock, - sizeof(vcpu->hv_clock)); + sizeof(vcpu->hv_clock)); kunmap_atomic(shared_kaddr, KM_USER0); @@ -599,10 +652,6 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, u32 msr, u64 data) /* ...but clean it before doing the actual write */ vcpu->arch.time_offset = data & ~(PAGE_MASK | 1); - vcpu->arch.hv_clock.tsc_to_system_mul = - clocksource_khz2mult(tsc_khz, 22); - vcpu->arch.hv_clock.tsc_shift = 22; - down_read(¤t->mm->mmap_sem); vcpu->arch.time_page = gfn_to_page(vcpu->kvm, data >> PAGE_SHIFT); diff --git a/include/asm-x86/kvm_host.h b/include/asm-x86/kvm_host.h index 1d8cd01..844f2a8 100644 --- a/include/asm-x86/kvm_host.h +++ b/include/asm-x86/kvm_host.h @@ -18,6 +18,7 @@ #include #include +#include #include #define KVM_MAX_VCPUS 16 @@ -282,7 +283,8 @@ struct kvm_vcpu_arch { struct x86_emulate_ctxt emulate_ctxt; gpa_t time; - struct kvm_vcpu_time_info hv_clock; + struct pvclock_vcpu_time_info hv_clock; + unsigned int hv_clock_tsc_khz; unsigned int time_offset; struct page *time_page; }; -- cgit v0.10.2 From f6e16d5ad463d15f285666f588cfe49495c692d9 Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:32 +0200 Subject: x86: KVM guest: Use the paravirt clocksource structs and functions This patch updates the kvm host code to use the pvclock structs and functions, thereby making it compatible with Xen. The patch also fixes an initialization bug: on SMP systems the per-cpu has two different locations early at boot and after CPU bringup. kvmclock must take that in account when registering the physical address within the host. Signed-off-by: Gerd Hoffmann Signed-off-by: Avi Kivity diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f94bca6..e0edaaa 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -383,6 +383,7 @@ config VMI config KVM_CLOCK bool "KVM paravirtualized clock" select PARAVIRT + select PARAVIRT_CLOCK depends on !(X86_VISWS || X86_VOYAGER) help Turning on this option will allow you to run a paravirtualized clock diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index 08a3098..87edf1c 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -18,6 +18,7 @@ #include #include +#include #include #include #include @@ -36,18 +37,9 @@ static int parse_no_kvmclock(char *arg) early_param("no-kvmclock", parse_no_kvmclock); /* The hypervisor will put information about time periodically here */ -static DEFINE_PER_CPU_SHARED_ALIGNED(struct kvm_vcpu_time_info, hv_clock); -#define get_clock(cpu, field) per_cpu(hv_clock, cpu).field +static DEFINE_PER_CPU_SHARED_ALIGNED(struct pvclock_vcpu_time_info, hv_clock); +static struct pvclock_wall_clock wall_clock; -static inline u64 kvm_get_delta(u64 last_tsc) -{ - int cpu = smp_processor_id(); - u64 delta = native_read_tsc() - last_tsc; - return (delta * get_clock(cpu, tsc_to_system_mul)) >> KVM_SCALE; -} - -static struct kvm_wall_clock wall_clock; -static cycle_t kvm_clock_read(void); /* * The wallclock is the time of day when we booted. Since then, some time may * have elapsed since the hypervisor wrote the data. So we try to account for @@ -55,64 +47,37 @@ static cycle_t kvm_clock_read(void); */ static unsigned long kvm_get_wallclock(void) { - u32 wc_sec, wc_nsec; - u64 delta; + struct pvclock_vcpu_time_info *vcpu_time; struct timespec ts; - int version, nsec; int low, high; low = (int)__pa(&wall_clock); high = ((u64)__pa(&wall_clock) >> 32); + native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - delta = kvm_clock_read(); + vcpu_time = &get_cpu_var(hv_clock); + pvclock_read_wallclock(&wall_clock, vcpu_time, &ts); + put_cpu_var(hv_clock); - native_write_msr(MSR_KVM_WALL_CLOCK, low, high); - do { - version = wall_clock.wc_version; - rmb(); - wc_sec = wall_clock.wc_sec; - wc_nsec = wall_clock.wc_nsec; - rmb(); - } while ((wall_clock.wc_version != version) || (version & 1)); - - delta = kvm_clock_read() - delta; - delta += wc_nsec; - nsec = do_div(delta, NSEC_PER_SEC); - set_normalized_timespec(&ts, wc_sec + delta, nsec); - /* - * Of all mechanisms of time adjustment I've tested, this one - * was the champion! - */ - return ts.tv_sec + 1; + return ts.tv_sec; } static int kvm_set_wallclock(unsigned long now) { - return 0; + return -1; } -/* - * This is our read_clock function. The host puts an tsc timestamp each time - * it updates a new time. Without the tsc adjustment, we can have a situation - * in which a vcpu starts to run earlier (smaller system_time), but probes - * time later (compared to another vcpu), leading to backwards time - */ static cycle_t kvm_clock_read(void) { - u64 last_tsc, now; - int cpu; + struct pvclock_vcpu_time_info *src; + cycle_t ret; - preempt_disable(); - cpu = smp_processor_id(); - - last_tsc = get_clock(cpu, tsc_timestamp); - now = get_clock(cpu, system_time); - - now += kvm_get_delta(last_tsc); - preempt_enable(); - - return now; + src = &get_cpu_var(hv_clock); + ret = pvclock_clocksource_read(src); + put_cpu_var(hv_clock); + return ret; } + static struct clocksource kvm_clock = { .name = "kvm-clock", .read = kvm_clock_read, @@ -123,13 +88,14 @@ static struct clocksource kvm_clock = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; -static int kvm_register_clock(void) +static int kvm_register_clock(char *txt) { int cpu = smp_processor_id(); int low, high; low = (int)__pa(&per_cpu(hv_clock, cpu)) | 1; high = ((u64)__pa(&per_cpu(hv_clock, cpu)) >> 32); - + printk(KERN_INFO "kvm-clock: cpu %d, msr %x:%x, %s\n", + cpu, high, low, txt); return native_write_msr_safe(MSR_KVM_SYSTEM_TIME, low, high); } @@ -140,12 +106,20 @@ static void kvm_setup_secondary_clock(void) * Now that the first cpu already had this clocksource initialized, * we shouldn't fail. */ - WARN_ON(kvm_register_clock()); + WARN_ON(kvm_register_clock("secondary cpu clock")); /* ok, done with our trickery, call native */ setup_secondary_APIC_clock(); } #endif +#ifdef CONFIG_SMP +void __init kvm_smp_prepare_boot_cpu(void) +{ + WARN_ON(kvm_register_clock("primary cpu clock")); + native_smp_prepare_boot_cpu(); +} +#endif + /* * After the clock is registered, the host will keep writing to the * registered memory location. If the guest happens to shutdown, this memory @@ -174,7 +148,7 @@ void __init kvmclock_init(void) return; if (kvmclock && kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { - if (kvm_register_clock()) + if (kvm_register_clock("boot clock")) return; pv_time_ops.get_wallclock = kvm_get_wallclock; pv_time_ops.set_wallclock = kvm_set_wallclock; @@ -182,6 +156,9 @@ void __init kvmclock_init(void) #ifdef CONFIG_X86_LOCAL_APIC pv_apic_ops.setup_secondary_clock = kvm_setup_secondary_clock; #endif +#ifdef CONFIG_SMP + smp_ops.smp_prepare_boot_cpu = kvm_smp_prepare_boot_cpu; +#endif machine_ops.shutdown = kvm_shutdown; #ifdef CONFIG_KEXEC machine_ops.crash_shutdown = kvm_crash_shutdown; -- cgit v0.10.2 From 6b1ed9086592fd4b066daae222751bb6757ca5eb Mon Sep 17 00:00:00 2001 From: Gerd Hoffmann Date: Tue, 3 Jun 2008 16:17:33 +0200 Subject: KVM: Remove now unused structs from kvm_para.h The kvm_* structs are obsoleted by the pvclock_* ones. Now all users have been switched over and the old structs can be dropped. Signed-off-by: Gerd Hoffmann Signed-off-by: Avi Kivity diff --git a/include/asm-x86/kvm_para.h b/include/asm-x86/kvm_para.h index 5098459..bfd9900 100644 --- a/include/asm-x86/kvm_para.h +++ b/include/asm-x86/kvm_para.h @@ -48,24 +48,6 @@ struct kvm_mmu_op_release_pt { #ifdef __KERNEL__ #include -/* xen binary-compatible interface. See xen headers for details */ -struct kvm_vcpu_time_info { - uint32_t version; - uint32_t pad0; - uint64_t tsc_timestamp; - uint64_t system_time; - uint32_t tsc_to_system_mul; - int8_t tsc_shift; - int8_t pad[3]; -} __attribute__((__packed__)); /* 32 bytes */ - -struct kvm_wall_clock { - uint32_t wc_version; - uint32_t wc_sec; - uint32_t wc_nsec; -} __attribute__((__packed__)); - - extern void kvmclock_init(void); -- cgit v0.10.2 From ea7b44c8e6baa1a4507f05ba2c0009ac21c3fe0b Mon Sep 17 00:00:00 2001 From: Jie Luo Date: Tue, 24 Jun 2008 10:38:31 -0700 Subject: enable bus mastering on i915 at resume time On 9xx chips, bus mastering needs to be enabled at resume time for much of the chip to function. With this patch, vblank interrupts will work as expected on resume, along with other chip functions. Fixes kernel bugzilla #10844. Signed-off-by: Jie Luo Signed-off-by: Jesse Barnes Signed-off-by: Linus Torvalds diff --git a/drivers/char/drm/i915_drv.c b/drivers/char/drm/i915_drv.c index e8f3d68..93aed1c 100644 --- a/drivers/char/drm/i915_drv.c +++ b/drivers/char/drm/i915_drv.c @@ -389,6 +389,7 @@ static int i915_resume(struct drm_device *dev) pci_restore_state(dev->pdev); if (pci_enable_device(dev->pdev)) return -1; + pci_set_master(dev->pdev); pci_write_config_byte(dev->pdev, LBB, dev_priv->saveLBB); -- cgit v0.10.2 From 88a6f4ad76be425f47df7f892baf913bcd466fb3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 24 Jun 2008 13:30:45 -0700 Subject: netfilter: ip6table_mangle: don't reroute in LOCAL_IN Rerouting should only happen in LOCAL_OUT, in INPUT its useless since the packet has already chosen its final destination. Noticed by Alexey Dobriyan . Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/ipv6/netfilter/ip6table_mangle.c b/net/ipv6/netfilter/ip6table_mangle.c index 27a5e8b..f405cea 100644 --- a/net/ipv6/netfilter/ip6table_mangle.c +++ b/net/ipv6/netfilter/ip6table_mangle.c @@ -129,7 +129,7 @@ static struct nf_hook_ops ip6t_ops[] __read_mostly = { .priority = NF_IP6_PRI_MANGLE, }, { - .hook = ip6t_local_hook, + .hook = ip6t_route_hook, .owner = THIS_MODULE, .pf = PF_INET6, .hooknum = NF_INET_LOCAL_IN, -- cgit v0.10.2 From eadc49b1a8d09480f14caea292142f103a89c77a Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 17 Jun 2008 23:53:22 -0700 Subject: [SCSI] esp: Fix OOPS in esp_reset_cleanup(). OOPS reported by Friedrich Oslage The problem here is that tp->starget is set every time a lun is allocated for a particular target so we can catch the sdev_target parent value. The reset handler uses the NULL'ness of this value to determine which targets are active. But esp_slave_destroy() does not NULL out this value when appropriate. So for every target that doesn't respond, the SCSI bus scan causes a stale pointer to be left here, with ensuing crashes like you're seeing. Signed-off-by: David S. Miller Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index a0b6d41..305edde 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2371,6 +2371,7 @@ static int esp_slave_alloc(struct scsi_device *dev) dev->hostdata = lp; tp->starget = dev->sdev_target; + tp->starget_ref++; spi_min_period(tp->starget) = esp->min_period; spi_max_offset(tp->starget) = 15; @@ -2425,10 +2426,17 @@ static int esp_slave_configure(struct scsi_device *dev) static void esp_slave_destroy(struct scsi_device *dev) { + struct esp *esp = shost_priv(dev->host); + struct esp_target_data *tp = &esp->target[dev->id]; struct esp_lun_data *lp = dev->hostdata; kfree(lp); dev->hostdata = NULL; + + BUG_ON(tp->starget_ref <= 0); + + if (!--tp->starget_ref) + tp->starget = NULL; } static int esp_eh_abort_handler(struct scsi_cmnd *cmd) diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h index bb43a13..655e0b2 100644 --- a/drivers/scsi/esp_scsi.h +++ b/drivers/scsi/esp_scsi.h @@ -322,6 +322,7 @@ struct esp_target_data { u8 nego_goal_tags; struct scsi_target *starget; + int starget_ref; }; struct esp_event_ent { -- cgit v0.10.2 From 543cf4cb3fe6f6cae3651ba918b9c56200b257d0 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 24 Jun 2008 18:58:20 -0700 Subject: Linux 2.6.26-rc8 diff --git a/Makefile b/Makefile index 2b4977c..6aff5f4 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v0.10.2 From 13d5ef97f0675d789f559cfebc1df9d5e2b1879c Mon Sep 17 00:00:00 2001 From: Peng Haitao Date: Fri, 16 May 2008 10:15:04 +0800 Subject: [PATCH] kernel/audit.c: nlh->nlmsg_type is gotten more than once The first argument "nlh->nlmsg_type" of audit_receive_filter() should be modified to "msg_type" in audit_receive_msg(). Signed-off-by: Peng Haitao Signed-off-by: Al Viro diff --git a/kernel/audit.c b/kernel/audit.c index e8692a5..56f3028 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -779,7 +779,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) } /* fallthrough */ case AUDIT_LIST: - err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid, + err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid, uid, seq, data, nlmsg_len(nlh), loginuid, sessionid, sid); break; @@ -798,7 +798,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) } /* fallthrough */ case AUDIT_LIST_RULES: - err = audit_receive_filter(nlh->nlmsg_type, NETLINK_CB(skb).pid, + err = audit_receive_filter(msg_type, NETLINK_CB(skb).pid, uid, seq, data, nlmsg_len(nlh), loginuid, sessionid, sid); break; -- cgit v0.10.2 From 9f0aecdd1cd6aacee9aa8f08031f4f2e09e454dc Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Mon, 19 May 2008 15:09:21 -0700 Subject: [PATCH] audit: fix kernel-doc parameter notation Fix auditfilter kernel-doc misssing parameter description: Warning(lin2626-rc3//kernel/auditfilter.c:1551): No description found for parameter 'sessionid' Signed-off-by: Randy Dunlap Signed-off-by: Al Viro diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 0e0bd27e..75cdf26 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1544,6 +1544,7 @@ static void audit_log_rule_change(uid_t loginuid, u32 sessionid, u32 sid, * @data: payload data * @datasz: size of payload data * @loginuid: loginuid of sender + * @sessionid: sessionid for netlink audit message * @sid: SE Linux Security ID of sender */ int audit_receive_filter(int type, int pid, int uid, int seq, void *data, -- cgit v0.10.2 From d8de72473effd674a3c1fe9621821f406f5587c9 Mon Sep 17 00:00:00 2001 From: Peng Haitao Date: Tue, 20 May 2008 09:13:02 +0800 Subject: [PATCH] remove useless argument type in audit_filter_user() The second argument "type" is not used in audit_filter_user(), so I think that type can be removed. If I'm wrong, please tell me. Signed-off-by: Peng Haitao Signed-off-by: Al Viro diff --git a/include/linux/audit.h b/include/linux/audit.h index 63c3bb9..8b82974 100644 --- a/include/linux/audit.h +++ b/include/linux/audit.h @@ -571,7 +571,7 @@ extern void audit_log_lost(const char *message); extern int audit_update_lsm_rules(void); /* Private API (for audit.c only) */ -extern int audit_filter_user(struct netlink_skb_parms *cb, int type); +extern int audit_filter_user(struct netlink_skb_parms *cb); extern int audit_filter_type(int type); extern int audit_receive_filter(int type, int pid, int uid, int seq, void *data, size_t datasz, uid_t loginuid, diff --git a/kernel/audit.c b/kernel/audit.c index 56f3028..e092f1c 100644 --- a/kernel/audit.c +++ b/kernel/audit.c @@ -738,7 +738,7 @@ static int audit_receive_msg(struct sk_buff *skb, struct nlmsghdr *nlh) if (!audit_enabled && msg_type != AUDIT_USER_AVC) return 0; - err = audit_filter_user(&NETLINK_CB(skb), msg_type); + err = audit_filter_user(&NETLINK_CB(skb)); if (err == 1) { err = 0; if (msg_type == AUDIT_USER_TTY) { diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index 75cdf26..98c50cc 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1721,7 +1721,7 @@ static int audit_filter_user_rules(struct netlink_skb_parms *cb, return 1; } -int audit_filter_user(struct netlink_skb_parms *cb, int type) +int audit_filter_user(struct netlink_skb_parms *cb) { enum audit_state state = AUDIT_DISABLED; struct audit_entry *e; -- cgit v0.10.2 From 71a7d1556264c1ad84b1bcf5f7a9cbc980b1e1fd Mon Sep 17 00:00:00 2001 From: Sonic Zhang Date: Wed, 25 Jun 2008 12:02:07 +0800 Subject: Blackfin arch: fix bug - kernel boot fails when Spinlock and rw-lock debugging enabled Initialize the lock of bad_irq_desc properly. The content of irq_desc array is replaced by bad_irq_desc in blackfin arch irqchip init code. So, do it properly as common irq init code. Signed-off-by: Sonic Zhang Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index 73647c1..07402f5 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -60,9 +60,14 @@ static struct irq_chip bad_chip = { }; static struct irq_desc bad_irq_desc = { + .status = IRQ_DISABLED, .chip = &bad_chip, .handle_irq = handle_bad_irq, .depth = 1, + .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock), +#ifdef CONFIG_SMP + .affinity = CPU_MASK_ALL +#endif }; int show_interrupts(struct seq_file *p, void *v) -- cgit v0.10.2 From 8d0a60032ffd472f0f7821ff388e9f438c06077a Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Wed, 25 Jun 2008 12:41:51 +0800 Subject: Blackfin arch: fix up section mismatch warning -- WARNING: vmlinux.o(.text+0x721a): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7238): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7250): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x7264): Section mismatch in reference from the function ___fill_code_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_code_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_code_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72a2): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72bc): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72d4): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. WARNING: vmlinux.o(.text+0x72e8): Section mismatch in reference from the function ___fill_data_cplbtab() to the function .init.text:_fill_cplbtab() The function ___fill_data_cplbtab() references the function __init _fill_cplbtab(). This is often because ___fill_data_cplbtab lacks a __init annotation or the annotation of _fill_cplbtab is wrong. -- Signed-off-by: Bryan Wu diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 917325b..6be0c50 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -254,7 +254,8 @@ close_cplbtab(struct cplb_tab *table) } /* helper function */ -static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +static void __init +__fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) { if (cplb_data[i].psize) { fill_cplbtab(t, @@ -291,7 +292,8 @@ static void __fill_code_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_en } } -static void __fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) +static void __init +__fill_data_cplbtab(struct cplb_tab *t, int i, u32 a_start, u32 a_end) { if (cplb_data[i].psize) { fill_cplbtab(t, -- cgit v0.10.2 From 59d393ad92f719d9ef36b96eae56d4817a7eeb10 Mon Sep 17 00:00:00 2001 From: Tony Vroon Date: Wed, 11 Jun 2008 16:23:56 -0400 Subject: mac80211: implement EU regulatory domain Implement missing EU regulatory domain for mac80211. Based on the information in IEEE 802.11-2007 (specifically pages 1142, 1143 & 1148) and ETSI 301 893 (V1.4.1). With thanks to Johannes Berg. Signed-off-by: Tony Vroon Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 185488d..855bff4 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -80,6 +80,23 @@ static const struct ieee80211_channel_range ieee80211_JP_channels[] = { IEEE80211_CHAN_RADAR), }; +static const struct ieee80211_channel_range ieee80211_EU_channels[] = { + /* IEEE 802.11b/g, channels 1..13 */ + RANGE_PWR(2412, 2472, 20, 6, 0), + /* IEEE 802.11a, channel 36*/ + RANGE_PWR(5180, 5180, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), + /* IEEE 802.11a, channel 40*/ + RANGE_PWR(5200, 5200, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), + /* IEEE 802.11a, channel 44*/ + RANGE_PWR(5220, 5220, 23, 6, IEEE80211_CHAN_PASSIVE_SCAN), + /* IEEE 802.11a, channels 48..64 */ + RANGE_PWR(5240, 5320, 23, 6, IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_RADAR), + /* IEEE 802.11a, channels 100..140 */ + RANGE_PWR(5500, 5700, 30, 6, IEEE80211_CHAN_NO_IBSS | + IEEE80211_CHAN_RADAR), +}; + #define REGDOM(_code) \ { \ .code = __stringify(_code), \ @@ -90,6 +107,7 @@ static const struct ieee80211_channel_range ieee80211_JP_channels[] = { static const struct ieee80211_regdomain ieee80211_regdoms[] = { REGDOM(US), REGDOM(JP), + REGDOM(EU), }; -- cgit v0.10.2 From c9e8eae0935f03e2d03a7ad7af80d8fc6c53e68c Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sun, 15 Jun 2008 15:17:29 +0200 Subject: b43: Do not return TX_BUSY from op_tx Never return TX_BUSY from op_tx. It doesn't make sense to return TX_BUSY, if we can not transmit the packet. Drop the packet and return TX_OK. This will fix the resume hang. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index fa4b0d8..a708277 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -2883,12 +2883,11 @@ static int b43_op_tx(struct ieee80211_hw *hw, if (unlikely(skb->len < 2 + 2 + 6)) { /* Too short, this can't be a valid frame. */ - dev_kfree_skb_any(skb); - return NETDEV_TX_OK; + goto drop_packet; } B43_WARN_ON(skb_shinfo(skb)->nr_frags); if (unlikely(!dev)) - return NETDEV_TX_BUSY; + goto drop_packet; /* Transmissions on seperate queues can run concurrently. */ read_lock_irqsave(&wl->tx_lock, flags); @@ -2904,7 +2903,12 @@ static int b43_op_tx(struct ieee80211_hw *hw, read_unlock_irqrestore(&wl->tx_lock, flags); if (unlikely(err)) - return NETDEV_TX_BUSY; + goto drop_packet; + return NETDEV_TX_OK; + +drop_packet: + /* We can not transmit this packet. Drop it. */ + dev_kfree_skb_any(skb); return NETDEV_TX_OK; } -- cgit v0.10.2 From 664f200610a3c9641ff58fc91b986b804cb1cc2d Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sun, 15 Jun 2008 15:27:49 +0200 Subject: b43legacy: Do not return TX_BUSY from op_tx Never return TX_BUSY from op_tx. It doesn't make sense to return TX_BUSY, if we can not transmit the packet. Drop the packet and return TX_OK. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43legacy/main.c b/drivers/net/wireless/b43legacy/main.c index 204077c..3e612d0 100644 --- a/drivers/net/wireless/b43legacy/main.c +++ b/drivers/net/wireless/b43legacy/main.c @@ -2378,8 +2378,10 @@ static int b43legacy_op_tx(struct ieee80211_hw *hw, } else err = b43legacy_dma_tx(dev, skb, ctl); out: - if (unlikely(err)) - return NETDEV_TX_BUSY; + if (unlikely(err)) { + /* Drop the packet. */ + dev_kfree_skb_any(skb); + } return NETDEV_TX_OK; } -- cgit v0.10.2 From 7b3abfc87ec13a81b255012b6e1bd4caeeb05aec Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Sun, 15 Jun 2008 16:01:24 +0200 Subject: b43: Fix possible MMIO access while device is down This fixes a possible MMIO access while the device is still down from a suspend cycle. MMIO accesses with the device powered down may cause crashes on certain devices. Signed-off-by: Michael Buesch Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c index 36a9c42..76f4c7b 100644 --- a/drivers/net/wireless/b43/leds.c +++ b/drivers/net/wireless/b43/leds.c @@ -72,6 +72,9 @@ static void b43_led_brightness_set(struct led_classdev *led_dev, struct b43_wldev *dev = led->dev; bool radio_enabled; + if (unlikely(b43_status(dev) < B43_STAT_INITIALIZED)) + return; + /* Checking the radio-enabled status here is slightly racy, * but we want to avoid the locking overhead and we don't care * whether the LED has the wrong state for a second. */ -- cgit v0.10.2 From 2f9ec47d0954f9d2e5a00209c2689cbc477a8c89 Mon Sep 17 00:00:00 2001 From: Michael Buesch Date: Fri, 20 Jun 2008 11:40:46 +0200 Subject: b43legacy: Fix possible NULL pointer dereference in DMA code This fixes a possible NULL pointer dereference in an error path of the DMA allocation error checking code. This is also necessary for a future DMA API change that is on its way into the mainline kernel that adds an additional dev parameter to dma_mapping_error(). Signed-off-by: Michael Buesch Cc: stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/b43legacy/dma.c b/drivers/net/wireless/b43legacy/dma.c index c990f87..93ddc1c 100644 --- a/drivers/net/wireless/b43legacy/dma.c +++ b/drivers/net/wireless/b43legacy/dma.c @@ -876,6 +876,7 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, if (!ring) goto out; ring->type = type; + ring->dev = dev; nr_slots = B43legacy_RXRING_SLOTS; if (for_tx) @@ -922,7 +923,6 @@ struct b43legacy_dmaring *b43legacy_setup_dmaring(struct b43legacy_wldev *dev, DMA_TO_DEVICE); } - ring->dev = dev; ring->nr_slots = nr_slots; ring->mmio_base = b43legacy_dmacontroller_base(type, controller_index); ring->index = controller_index; -- cgit v0.10.2 From 99ade2597e3f7f0ad463c489aaccd6cc605e242c Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Fri, 20 Jun 2008 22:11:00 +0200 Subject: rt2x00: Fix unbalanced mutex locking The usb_cache_mutex was not correctly released under all circumstances. Both rt73usb as rt2500usb didn't release the mutex under certain conditions when the register access failed. Obviously such failure would lead to deadlocks. In addition under similar circumstances when the bbp register couldn't be read the value must be set to 0xff to indicate that the value is wrong. This too didn't happen under all circumstances. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c index fdbd0ef..61e59c1 100644 --- a/drivers/net/wireless/rt2x00/rt2500usb.c +++ b/drivers/net/wireless/rt2x00/rt2500usb.c @@ -138,11 +138,8 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) + goto exit_fail; /* * Write the data into the BBP. @@ -155,6 +152,13 @@ static void rt2500usb_bbp_write(struct rt2x00_dev *rt2x00dev, rt2500usb_register_write_lock(rt2x00dev, PHY_CSR7, reg); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR8 register busy. Write failed.\n"); } static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -168,10 +172,8 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - return; - } + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) + goto exit_fail; /* * Write the request into the BBP. @@ -186,17 +188,21 @@ static void rt2500usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt2500usb_bbp_check(rt2x00dev); - if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); - *value = 0xff; - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field16(reg, PHY_CSR8_BUSY)) + goto exit_fail; rt2500usb_register_read_lock(rt2x00dev, PHY_CSR7, ®); *value = rt2x00_get_field16(reg, PHY_CSR7_DATA); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR8 register busy. Read failed.\n"); + *value = 0xff; } static void rt2500usb_rf_write(struct rt2x00_dev *rt2x00dev, diff --git a/drivers/net/wireless/rt2x00/rt73usb.c b/drivers/net/wireless/rt2x00/rt73usb.c index fff8386..83cc014 100644 --- a/drivers/net/wireless/rt2x00/rt73usb.c +++ b/drivers/net/wireless/rt2x00/rt73usb.c @@ -134,11 +134,8 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + goto exit_fail; /* * Write the data into the BBP. @@ -151,6 +148,13 @@ static void rt73usb_bbp_write(struct rt2x00_dev *rt2x00dev, rt73usb_register_write_lock(rt2x00dev, PHY_CSR3, reg); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR3 register busy. Write failed.\n"); } static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, @@ -164,11 +168,8 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - mutex_unlock(&rt2x00dev->usb_cache_mutex); - return; - } + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + goto exit_fail; /* * Write the request into the BBP. @@ -184,14 +185,19 @@ static void rt73usb_bbp_read(struct rt2x00_dev *rt2x00dev, * Wait until the BBP becomes ready. */ reg = rt73usb_bbp_check(rt2x00dev); - if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) { - ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); - *value = 0xff; - return; - } + if (rt2x00_get_field32(reg, PHY_CSR3_BUSY)) + goto exit_fail; *value = rt2x00_get_field32(reg, PHY_CSR3_VALUE); mutex_unlock(&rt2x00dev->usb_cache_mutex); + + return; + +exit_fail: + mutex_unlock(&rt2x00dev->usb_cache_mutex); + + ERROR(rt2x00dev, "PHY_CSR3 register busy. Read failed.\n"); + *value = 0xff; } static void rt73usb_rf_write(struct rt2x00_dev *rt2x00dev, -- cgit v0.10.2 From 66b5004d85164a6439d3ba1e7757734472ee2cac Mon Sep 17 00:00:00 2001 From: Ron Rindjunsky Date: Wed, 25 Jun 2008 16:46:31 +0800 Subject: iwlwifi: improve scanning band selection management This patch modifies the band selection management when scanning, so bands are now scanned according to HW band support. Signed-off-by: Ron Rindjunsky Signed-off-by: Tomas Winkler Signed-off-by: Zhu Yi Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 13925b6..b1b3c52 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -2227,7 +2227,10 @@ static int iwl3945_scan_initiate(struct iwl3945_priv *priv) } IWL_DEBUG_INFO("Starting scan...\n"); - priv->scan_bands = 2; + if (priv->cfg->sku & IWL_SKU_G) + priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ); + if (priv->cfg->sku & IWL_SKU_A) + priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ); set_bit(STATUS_SCANNING, &priv->status); priv->scan_start = jiffies; priv->scan_pass_start = priv->scan_start; @@ -3352,13 +3355,18 @@ static void iwl3945_rx_scan_complete_notif(struct iwl3945_priv *priv, cancel_delayed_work(&priv->scan_check); IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", - (priv->scan_bands == 2) ? "2.4" : "5.2", + (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? + "2.4" : "5.2", jiffies_to_msecs(elapsed_jiffies (priv->scan_pass_start, jiffies))); - /* Remove this scanned band from the list - * of pending bands to scan */ - priv->scan_bands--; + /* Remove this scanned band from the list of pending + * bands to scan, band G precedes A in order of scanning + * as seen in iwl3945_bg_request_scan */ + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ); + else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ); /* If a request to abort was given, or the scan did not succeed * then we reset the scan state machine and terminate, @@ -4972,7 +4980,7 @@ static int iwl3945_get_channels_for_scan(struct iwl3945_priv *priv, ch_info = iwl3945_get_channel_info(priv, band, scan_ch->channel); if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", + IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n", scan_ch->channel); continue; } @@ -6315,21 +6323,16 @@ static void iwl3945_bg_request_scan(struct work_struct *data) /* flags + rate selection */ - switch (priv->scan_bands) { - case 2: + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) { scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; scan->tx_cmd.rate = IWL_RATE_1M_PLCP; scan->good_CRC_th = 0; band = IEEE80211_BAND_2GHZ; - break; - - case 1: + } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) { scan->tx_cmd.rate = IWL_RATE_6M_PLCP; scan->good_CRC_th = IWL_GOOD_CRC_TH; band = IEEE80211_BAND_5GHZ; - break; - - default: + } else { IWL_WARNING("Invalid scan band count\n"); goto done; } @@ -6770,7 +6773,7 @@ static int iwl3945_mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *co ch_info = iwl3945_get_channel_info(priv, conf->channel->band, conf->channel->hw_value); if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this SKU.\n", + IWL_DEBUG_SCAN("Channel %d [%d] is INVALID for this band.\n", conf->channel->hw_value, conf->channel->band); IWL_DEBUG_MAC80211("leave - invalid channel\n"); spin_unlock_irqrestore(&priv->lock, flags); diff --git a/drivers/net/wireless/iwlwifi/iwl4965-base.c b/drivers/net/wireless/iwlwifi/iwl4965-base.c index 883b42f..5ed16ce 100644 --- a/drivers/net/wireless/iwlwifi/iwl4965-base.c +++ b/drivers/net/wireless/iwlwifi/iwl4965-base.c @@ -1774,7 +1774,10 @@ static int iwl4965_scan_initiate(struct iwl_priv *priv) } IWL_DEBUG_INFO("Starting scan...\n"); - priv->scan_bands = 2; + if (priv->cfg->sku & IWL_SKU_G) + priv->scan_bands |= BIT(IEEE80211_BAND_2GHZ); + if (priv->cfg->sku & IWL_SKU_A) + priv->scan_bands |= BIT(IEEE80211_BAND_5GHZ); set_bit(STATUS_SCANNING, &priv->status); priv->scan_start = jiffies; priv->scan_pass_start = priv->scan_start; @@ -3023,8 +3026,9 @@ static void iwl4965_rx_reply_tx(struct iwl_priv *priv, IWL_DEBUG_TX_REPLY("Tx queue reclaim %d\n", index); if (index != -1) { - int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); #ifdef CONFIG_IWL4965_HT + int freed = iwl4965_tx_queue_reclaim(priv, txq_id, index); + if (tid != MAX_TID_COUNT) priv->stations[sta_id].tid[tid].tfds_in_queue -= freed; if (iwl4965_queue_space(&txq->q) > txq->q.low_mark && @@ -3276,13 +3280,18 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv, cancel_delayed_work(&priv->scan_check); IWL_DEBUG_INFO("Scan pass on %sGHz took %dms\n", - (priv->scan_bands == 2) ? "2.4" : "5.2", + (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) ? + "2.4" : "5.2", jiffies_to_msecs(elapsed_jiffies (priv->scan_pass_start, jiffies))); - /* Remove this scanned band from the list - * of pending bands to scan */ - priv->scan_bands--; + /* Remove this scanned band from the list of pending + * bands to scan, band G precedes A in order of scanning + * as seen in iwl_bg_request_scan */ + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_2GHZ); + else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) + priv->scan_bands &= ~BIT(IEEE80211_BAND_5GHZ); /* If a request to abort was given, or the scan did not succeed * then we reset the scan state machine and terminate, @@ -3292,7 +3301,7 @@ static void iwl4965_rx_scan_complete_notif(struct iwl_priv *priv, clear_bit(STATUS_SCAN_ABORTING, &priv->status); } else { /* If there are more bands on this scan pass reschedule */ - if (priv->scan_bands > 0) + if (priv->scan_bands) goto reschedule; } @@ -4635,10 +4644,9 @@ static int iwl4965_get_channels_for_scan(struct iwl_priv *priv, scan_ch->channel = ieee80211_frequency_to_channel(channels[i].center_freq); - ch_info = iwl_get_channel_info(priv, band, - scan_ch->channel); + ch_info = iwl_get_channel_info(priv, band, scan_ch->channel); if (!is_channel_valid(ch_info)) { - IWL_DEBUG_SCAN("Channel %d is INVALID for this SKU.\n", + IWL_DEBUG_SCAN("Channel %d is INVALID for this band.\n", scan_ch->channel); continue; } @@ -5830,8 +5838,7 @@ static void iwl4965_bg_request_scan(struct work_struct *data) scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE; - switch (priv->scan_bands) { - case 2: + if (priv->scan_bands & BIT(IEEE80211_BAND_2GHZ)) { scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK; scan->tx_cmd.rate_n_flags = iwl4965_hw_set_rate_n_flags(IWL_RATE_1M_PLCP, @@ -5839,17 +5846,13 @@ static void iwl4965_bg_request_scan(struct work_struct *data) scan->good_CRC_th = 0; band = IEEE80211_BAND_2GHZ; - break; - - case 1: + } else if (priv->scan_bands & BIT(IEEE80211_BAND_5GHZ)) { scan->tx_cmd.rate_n_flags = iwl4965_hw_set_rate_n_flags(IWL_RATE_6M_PLCP, RATE_MCS_ANT_B_MSK); scan->good_CRC_th = IWL_GOOD_CRC_TH; band = IEEE80211_BAND_5GHZ; - break; - - default: + } else { IWL_WARNING("Invalid scan band count\n"); goto done; } -- cgit v0.10.2 From ec5e69f6d3f4350681d6f7eaae515cf014be9276 Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Mon, 23 Jun 2008 14:52:09 -0500 Subject: [SCSI] esp: tidy up target reference counting The esp driver currently does hand rolled reference counting of its target. It's much easier to do what it needs to do if it's plugged into the mid-layer callbacks (target_alloc and target_destroy) which were designed for this case, so do it this way and get rid of the internal target reference count. Acked-by: David S. Miller Cc: Stable Tree Signed-off-by: James Bottomley diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c index 305edde..59fbef0 100644 --- a/drivers/scsi/esp_scsi.c +++ b/drivers/scsi/esp_scsi.c @@ -2359,6 +2359,24 @@ void scsi_esp_unregister(struct esp *esp) } EXPORT_SYMBOL(scsi_esp_unregister); +static int esp_target_alloc(struct scsi_target *starget) +{ + struct esp *esp = shost_priv(dev_to_shost(&starget->dev)); + struct esp_target_data *tp = &esp->target[starget->id]; + + tp->starget = starget; + + return 0; +} + +static void esp_target_destroy(struct scsi_target *starget) +{ + struct esp *esp = shost_priv(dev_to_shost(&starget->dev)); + struct esp_target_data *tp = &esp->target[starget->id]; + + tp->starget = NULL; +} + static int esp_slave_alloc(struct scsi_device *dev) { struct esp *esp = shost_priv(dev->host); @@ -2370,9 +2388,6 @@ static int esp_slave_alloc(struct scsi_device *dev) return -ENOMEM; dev->hostdata = lp; - tp->starget = dev->sdev_target; - tp->starget_ref++; - spi_min_period(tp->starget) = esp->min_period; spi_max_offset(tp->starget) = 15; @@ -2426,17 +2441,10 @@ static int esp_slave_configure(struct scsi_device *dev) static void esp_slave_destroy(struct scsi_device *dev) { - struct esp *esp = shost_priv(dev->host); - struct esp_target_data *tp = &esp->target[dev->id]; struct esp_lun_data *lp = dev->hostdata; kfree(lp); dev->hostdata = NULL; - - BUG_ON(tp->starget_ref <= 0); - - if (!--tp->starget_ref) - tp->starget = NULL; } static int esp_eh_abort_handler(struct scsi_cmnd *cmd) @@ -2616,6 +2624,8 @@ struct scsi_host_template scsi_esp_template = { .name = "esp", .info = esp_info, .queuecommand = esp_queuecommand, + .target_alloc = esp_target_alloc, + .target_destroy = esp_target_destroy, .slave_alloc = esp_slave_alloc, .slave_configure = esp_slave_configure, .slave_destroy = esp_slave_destroy, diff --git a/drivers/scsi/esp_scsi.h b/drivers/scsi/esp_scsi.h index 655e0b2..bb43a13 100644 --- a/drivers/scsi/esp_scsi.h +++ b/drivers/scsi/esp_scsi.h @@ -322,7 +322,6 @@ struct esp_target_data { u8 nego_goal_tags; struct scsi_target *starget; - int starget_ref; }; struct esp_event_ent { -- cgit v0.10.2 From 9e6c29768fc05d32ba1342b9348957b24bc476c2 Mon Sep 17 00:00:00 2001 From: Jaya Kumar Date: Sun, 22 Jun 2008 04:27:27 +0100 Subject: [ARM] 5117/1: pxafb: fix __devinit/exit annotations This patch fixes pxafb's init/exit annotations. It uses __devinit/exit for probe functions and __init for init functions. g_options is left as __devinitdata since it is used by both. Signed-off-by: Jaya Kumar Acked-by: Krzysztof Helt Acked-by: Eric Miao Signed-off-by: Russell King diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index 796e0d1..fafe7db 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1246,7 +1246,7 @@ static int pxafb_resume(struct platform_device *dev) * cache. Once this area is remapped, all virtual memory * access to the video memory should occur at the new region. */ -static int __init pxafb_map_video_memory(struct pxafb_info *fbi) +static int __devinit pxafb_map_video_memory(struct pxafb_info *fbi) { /* * We reserve one page for the palette, plus the size @@ -1348,7 +1348,7 @@ decode_mode: pxafb_decode_mode_info(fbi, inf->modes, inf->num_modes); } -static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) +static struct pxafb_info * __devinit pxafb_init_fbinfo(struct device *dev) { struct pxafb_info *fbi; void *addr; @@ -1410,7 +1410,7 @@ static struct pxafb_info * __init pxafb_init_fbinfo(struct device *dev) } #ifdef CONFIG_FB_PXA_PARAMETERS -static int __init parse_opt_mode(struct device *dev, const char *this_opt) +static int __devinit parse_opt_mode(struct device *dev, const char *this_opt) { struct pxafb_mach_info *inf = dev->platform_data; @@ -1469,7 +1469,7 @@ done: return 0; } -static int __init parse_opt(struct device *dev, char *this_opt) +static int __devinit parse_opt(struct device *dev, char *this_opt) { struct pxafb_mach_info *inf = dev->platform_data; struct pxafb_mode_info *mode = &inf->modes[0]; @@ -1567,7 +1567,7 @@ static int __init parse_opt(struct device *dev, char *this_opt) return 0; } -static int __init pxafb_parse_options(struct device *dev, char *options) +static int __devinit pxafb_parse_options(struct device *dev, char *options) { char *this_opt; int ret; @@ -1589,7 +1589,7 @@ static int __init pxafb_parse_options(struct device *dev, char *options) static char g_options[256] __devinitdata = ""; #ifndef MODULE -static int __devinit pxafb_setup_options(void) +static int __init pxafb_setup_options(void) { char *options = NULL; @@ -1613,7 +1613,7 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)"); #define pxafb_setup_options() (0) #endif -static int __init pxafb_probe(struct platform_device *dev) +static int __devinit pxafb_probe(struct platform_device *dev) { struct pxafb_info *fbi; struct pxafb_mach_info *inf; @@ -1801,7 +1801,7 @@ static struct platform_driver pxafb_driver = { }, }; -static int __devinit pxafb_init(void) +static int __init pxafb_init(void) { if (pxafb_setup_options()) return -EINVAL; -- cgit v0.10.2 From 16d752397301b95abaa95cbaf9e785d221872311 Mon Sep 17 00:00:00 2001 From: Rene Herman Date: Tue, 24 Jun 2008 19:38:56 +0200 Subject: thermal: Create CONFIG_THERMAL_HWMON=n A bug in libsensors <= 2.10.6 is exposed when this new hwmon I/F is enabled. Create CONFIG_THERMAL_HWMON=n until some time after libsensors 2.10.7 ships so those users can run the latest kernel. libsensors 3.x is already fixed -- those users can use CONFIG_THERMAL_HWMON=y now. Signed-off-by: Rene Herman Acked-by: Mark M. Hoffman Signed-off-by: Len Brown diff --git a/Documentation/feature-removal-schedule.txt b/Documentation/feature-removal-schedule.txt index 5b3f31f..46ece3f 100644 --- a/Documentation/feature-removal-schedule.txt +++ b/Documentation/feature-removal-schedule.txt @@ -312,3 +312,12 @@ When: 2.6.26 Why: Implementation became generic; users should now include linux/semaphore.h instead. Who: Matthew Wilcox + +--------------------------- + +What: CONFIG_THERMAL_HWMON +When: January 2009 +Why: This option was introduced just to allow older lm-sensors userspace + to keep working over the upgrade to 2.6.26. At the scheduled time of + removal fixed lm-sensors (2.x or 3.x) should be readily available. +Who: Rene Herman diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 4b62852..a86e952 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -12,3 +12,12 @@ menuconfig THERMAL cooling devices. All platforms with ACPI thermal support can use this driver. If you want this support, you should say Y or M here. + +config THERMAL_HWMON + bool "Hardware monitoring support" + depends on HWMON=y || HWMON=THERMAL + help + The generic thermal sysfs driver's hardware monitoring support + requires a 2.10.7/3.0.2 or later lm-sensors userspace. + + Say Y if your user-space is new enough. diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c index 6098787..fe07462 100644 --- a/drivers/thermal/thermal_sys.c +++ b/drivers/thermal/thermal_sys.c @@ -295,8 +295,8 @@ thermal_cooling_device_trip_point_show(struct device *dev, /* Device management */ -#if defined(CONFIG_HWMON) || \ - (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE)) +#if defined(CONFIG_THERMAL_HWMON) + /* hwmon sys I/F */ #include static LIST_HEAD(thermal_hwmon_list); diff --git a/include/linux/thermal.h b/include/linux/thermal.h index 06d3e6e..917707e 100644 --- a/include/linux/thermal.h +++ b/include/linux/thermal.h @@ -66,8 +66,7 @@ struct thermal_cooling_device { ((long)t-2732+5)/10 : ((long)t-2732-5)/10) #define CELSIUS_TO_KELVIN(t) ((t)*10+2732) -#if defined(CONFIG_HWMON) || \ - (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE)) +#if defined(CONFIG_THERMAL_HWMON) /* thermal zone devices with the same type share one hwmon device */ struct thermal_hwmon_device { char type[THERMAL_NAME_LENGTH]; @@ -94,8 +93,7 @@ struct thermal_zone_device { struct idr idr; struct mutex lock; /* protect cooling devices list */ struct list_head node; -#if defined(CONFIG_HWMON) || \ - (defined(CONFIG_HWMON_MODULE) && defined(CONFIG_THERMAL_MODULE)) +#if defined(CONFIG_THERMAL_HWMON) struct list_head hwmon_node; struct thermal_hwmon_device *hwmon; struct thermal_hwmon_attr temp_input; /* hwmon sys attr */ -- cgit v0.10.2 From 4389ed2ff61de2b1485b31bf342da913dd342f59 Mon Sep 17 00:00:00 2001 From: Vegard Nossum Date: Fri, 20 Jun 2008 15:39:09 +0200 Subject: ACPI: don't walk tables if ACPI was disabled Ingo Molnar wrote: > -tip auto-testing started triggering this spinlock corruption message > yesterday: > > [ 3.976213] calling acpi_rtc_init+0x0/0xd3 > [ 3.980213] ACPI Exception (utmutex-0263): AE_BAD_PARAMETER, Thread F7C50000 could not acquire Mutex [3] [20080321] > [ 3.992213] BUG: spinlock bad magic on CPU#0, swapper/1 > [ 3.992213] lock: c2508dc4, .magic: 00000000, .owner: swapper/1, .owner_cpu: 0 This is apparently because some parts of ACPI, including mutexes, are not initialized when acpi=off is passed to the kernel. Reported-by: Ingo Molnar Signed-off-by: Vegard Nossum Signed-off-by: Len Brown diff --git a/drivers/acpi/glue.c b/drivers/acpi/glue.c index 2808dc6..9b227d4 100644 --- a/drivers/acpi/glue.c +++ b/drivers/acpi/glue.c @@ -333,6 +333,9 @@ static int __init acpi_rtc_init(void) { struct device *dev = get_rtc_dev(); + if (acpi_disabled) + return 0; + if (dev) { rtc_wake_setup(); rtc_info.wake_on = rtc_wake_on; -- cgit v0.10.2 From 816c2eda3ce8fa7eb62f22e01e2ec7a3f7d677c0 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 24 Jun 2008 22:57:12 -0400 Subject: dock: bay: Don't call acpi_walk_namespace() when ACPI is disabled. Signed-off-by: Len Brown diff --git a/drivers/acpi/bay.c b/drivers/acpi/bay.c index 26038c2..61b6c5b 100644 --- a/drivers/acpi/bay.c +++ b/drivers/acpi/bay.c @@ -377,6 +377,9 @@ static int __init bay_init(void) INIT_LIST_HEAD(&drive_bays); + if (acpi_disabled) + return -ENODEV; + /* look for dockable drive bays */ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, find_bay, &bays, NULL); diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index 96c542f..bb7c51f 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -917,6 +917,9 @@ static int __init dock_init(void) dock_station = NULL; + if (acpi_disabled) + return 0; + /* look for a dock station */ acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT, ACPI_UINT32_MAX, find_dock, &num, NULL); -- cgit v0.10.2 From 41aefdcc98fdba47459eab67630293d67e855fc3 Mon Sep 17 00:00:00 2001 From: Max Asbock Date: Wed, 25 Jun 2008 14:45:28 -0700 Subject: x86: shift bits the right way in native_read_tscp native_read_tscp shifts the bits in the high order value in the wrong direction, the attached patch fixes that. Signed-off-by: Max Asbock Acked-by: Glauber Costa Signed-off-by: Ingo Molnar diff --git a/include/asm-x86/msr.h b/include/asm-x86/msr.h index 3707650..2b5f2c9 100644 --- a/include/asm-x86/msr.h +++ b/include/asm-x86/msr.h @@ -18,7 +18,7 @@ static inline unsigned long long native_read_tscp(unsigned int *aux) unsigned long low, high; asm volatile(".byte 0x0f,0x01,0xf9" : "=a" (low), "=d" (high), "=c" (*aux)); - return low | ((u64)high >> 32); + return low | ((u64)high << 32); } /* -- cgit v0.10.2 From 0b1faeef5f9243bb5fc5713a34bbf1ceab0de562 Mon Sep 17 00:00:00 2001 From: Daniel J Blueman Date: Sun, 15 Jun 2008 12:32:15 +0100 Subject: x86: section/warning fixes WARNING: arch/x86/mm/built-in.o(.text+0x3a1): Section mismatch in reference from the function set_pte_phys() to the function .init.text:spp_getpage() The function set_pte_phys() references the function __init spp_getpage(). This is often because set_pte_phys lacks a __init annotation or the annotation of spp_getpage is wrong. arch/x86/mm/init_64.c: In function 'early_memtest': arch/x86/mm/init_64.c:520: warning: passing argument 2 of 'find_e820_area_size' from incompatible pointer type Signed-off-by: Daniel J Blueman Cc: "Linus Torvalds" Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 156e6d7..f6d20be 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -135,7 +135,7 @@ static __init void *spp_getpage(void) return ptr; } -static void +static __init void set_pte_phys(unsigned long vaddr, unsigned long phys, pgprot_t prot) { pgd_t *pgd; @@ -214,7 +214,7 @@ void __init cleanup_highmap(void) } /* NOTE: this is meant to be run only at boot */ -void __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) +void __init __set_fixmap(enum fixed_addresses idx, unsigned long phys, pgprot_t prot) { unsigned long address = __fix_to_virt(idx); @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - u64 t_start, t_size; + unsigned long t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,7 +525,7 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016llx - %016llx pattern %d", + printk(KERN_CONT "\n %016lx - %016lx pattern %d", t_start, t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From fde60748d2f0345cabff20d25458c67d4ac06034 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 5 Jun 2008 18:59:08 -0300 Subject: V4L/DVB (8004): Fix INPUT dependency at budget-ci As reported by Ingo Molnar: MODPOST 346 modules ERROR: "input_free_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_register_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_allocate_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_unregister_device" [drivers/media/dvb/ttpci/budget-ci.ko] undefined! ERROR: "input_event" [drivers/media/common/ir-common.ko] undefined! This occurs when: CONFIG_INPUT=n CONFIG_VIDEO_IR=m CONFIG_DVB_BUDGET_CI=m Thanks-to: Ingo Molnar Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index d4339b1..07643e0 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -101,6 +101,7 @@ config DVB_BUDGET config DVB_BUDGET_CI tristate "Budget cards with onboard CI connector" depends on DVB_BUDGET_CORE && I2C + depends on INPUT # due to IR select DVB_STV0297 if !DVB_FE_CUSTOMISE select DVB_STV0299 if !DVB_FE_CUSTOMISE select DVB_TDA1004X if !DVB_FE_CUSTOMISE -- cgit v0.10.2 From bf67cac1314ba29676fbac2decde0e2e0a8170f8 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 7 Jun 2008 15:54:10 -0300 Subject: V4L/DVB (8005): Fix OOPS if frontend is null Thanks to timf and Mike Galbraith to report this issue. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 469f93a..726f01c 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1338,7 +1338,8 @@ static int dvb_init(struct saa7134_dev *dev) return ret; dettach_frontend: - dvb_frontend_detach(dev->dvb.frontend); + if (dev->dvb.frontend) + dvb_frontend_detach(dev->dvb.frontend); dev->dvb.frontend = NULL; return -1; -- cgit v0.10.2 From 45270a1531a2aa90dd890666913c25a1e6f5e8eb Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 7 Jun 2008 11:18:17 -0300 Subject: V4L/DVB (8007): cx18/cx25840: the S-Video LUMA input can use all In1-In8 inputs The S-Video LUMA input was restricted to the In1-In4 inputs, but it turns out that it can use the full range of In1-In8. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 9a26751..8f2959a 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -228,7 +228,7 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, if ((vid_input & ~0xff0) || luma < CX18_AV_SVIDEO_LUMA1 || - luma > CX18_AV_SVIDEO_LUMA4 || + luma > CX18_AV_SVIDEO_LUMA8 || chroma < CX18_AV_SVIDEO_CHROMA4 || chroma > CX18_AV_SVIDEO_CHROMA8) { CX18_ERR("0x%04x is not a valid video input!\n", diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 786901d..39f3c93 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -37,12 +37,16 @@ enum cx18_av_video_input { CX18_AV_COMPOSITE7, CX18_AV_COMPOSITE8, - /* S-Video inputs consist of one luma input (In1-In4) ORed with one + /* S-Video inputs consist of one luma input (In1-In8) ORed with one chroma input (In5-In8) */ CX18_AV_SVIDEO_LUMA1 = 0x10, CX18_AV_SVIDEO_LUMA2 = 0x20, CX18_AV_SVIDEO_LUMA3 = 0x30, CX18_AV_SVIDEO_LUMA4 = 0x40, + CX18_AV_SVIDEO_LUMA5 = 0x50, + CX18_AV_SVIDEO_LUMA6 = 0x60, + CX18_AV_SVIDEO_LUMA7 = 0x70, + CX18_AV_SVIDEO_LUMA8 = 0x80, CX18_AV_SVIDEO_CHROMA4 = 0x400, CX18_AV_SVIDEO_CHROMA5 = 0x500, CX18_AV_SVIDEO_CHROMA6 = 0x600, diff --git a/drivers/media/video/cx25840/cx25840-core.c b/drivers/media/video/cx25840/cx25840-core.c index 607efdc..1da6f13 100644 --- a/drivers/media/video/cx25840/cx25840-core.c +++ b/drivers/media/video/cx25840/cx25840-core.c @@ -433,7 +433,7 @@ static int set_input(struct i2c_client *client, enum cx25840_video_input vid_inp int chroma = vid_input & 0xf00; if ((vid_input & ~0xff0) || - luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA4 || + luma < CX25840_SVIDEO_LUMA1 || luma > CX25840_SVIDEO_LUMA8 || chroma < CX25840_SVIDEO_CHROMA4 || chroma > CX25840_SVIDEO_CHROMA8) { v4l_err(client, "0x%04x is not a valid video input!\n", vid_input); diff --git a/include/media/cx25840.h b/include/media/cx25840.h index cd599ad..db431d5 100644 --- a/include/media/cx25840.h +++ b/include/media/cx25840.h @@ -32,12 +32,16 @@ enum cx25840_video_input { CX25840_COMPOSITE7, CX25840_COMPOSITE8, - /* S-Video inputs consist of one luma input (In1-In4) ORed with one + /* S-Video inputs consist of one luma input (In1-In8) ORed with one chroma input (In5-In8) */ CX25840_SVIDEO_LUMA1 = 0x10, CX25840_SVIDEO_LUMA2 = 0x20, CX25840_SVIDEO_LUMA3 = 0x30, CX25840_SVIDEO_LUMA4 = 0x40, + CX25840_SVIDEO_LUMA5 = 0x50, + CX25840_SVIDEO_LUMA6 = 0x60, + CX25840_SVIDEO_LUMA7 = 0x70, + CX25840_SVIDEO_LUMA8 = 0x80, CX25840_SVIDEO_CHROMA4 = 0x400, CX25840_SVIDEO_CHROMA5 = 0x500, CX25840_SVIDEO_CHROMA6 = 0x600, -- cgit v0.10.2 From d3d9b803eead0a536d28ffc31c5fadae976991cc Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sun, 8 Jun 2008 06:05:18 -0300 Subject: V4L/DVB (8008): cx18: remove duplicate audio and video input enums cx18-cards.h had a copy of the audio and video input enums from cx18-av-core.h, but with different prefixes. Removed that copy and used the ones from cx18-av-core.h. Thanks to Andy Walls for the report. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index baccd07..c35eb53 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -23,6 +23,7 @@ #include "cx18-driver.h" #include "cx18-cards.h" +#include "cx18-av-core.h" #include "cx18-i2c.h" #include @@ -54,22 +55,22 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345 | CX18_HW_DVB, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 }, - { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 }, - { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .ddr = { /* ESMT M13S128324A-5B memory */ .chip_config = 0x003, @@ -94,22 +95,22 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { .hw_all = CX18_HW_TVEEPROM | CX18_HW_TUNER | CX18_HW_CS5345 | CX18_HW_DVB, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 }, - { CX18_CARD_INPUT_SVIDEO2, 2, CX23418_SVIDEO2 }, - { CX18_CARD_INPUT_COMPOSITE2, 2, CX23418_COMPOSITE4 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_SVIDEO2, 2, CX18_AV_SVIDEO2 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE4 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, + CX18_AV_AUDIO8, CS5345_IN_1 | CS5345_MCLK_1_5 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX23418_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .ddr = { /* Samsung K4D263238G-VC33 memory */ .chip_config = 0x003, @@ -141,19 +142,19 @@ static const struct cx18_card cx18_card_h900 = { .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE2 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, { CX18_CARD_INPUT_SVIDEO1, 1, - CX23418_SVIDEO_LUMA3 | CX23418_SVIDEO_CHROMA4 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE1 }, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, 0 }, + CX18_AV_AUDIO8, 0 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .tuners = { { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, }, @@ -188,18 +189,18 @@ static const struct cx18_card cx18_card_mpc718 = { .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX23418_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX23418_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX23418_COMPOSITE3 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, + { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO8, 0 }, + CX18_AV_AUDIO8, 0 }, { CX18_CARD_INPUT_LINE_IN1, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX23418_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index bccb67f..3c2c0b9 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -36,36 +36,6 @@ #define CX18_CARD_INPUT_COMPOSITE2 5 #define CX18_CARD_INPUT_COMPOSITE3 6 -enum cx34180_video_input { - /* Composite video inputs In1-In8 */ - CX23418_COMPOSITE1 = 1, - CX23418_COMPOSITE2, - CX23418_COMPOSITE3, - CX23418_COMPOSITE4, - CX23418_COMPOSITE5, - CX23418_COMPOSITE6, - CX23418_COMPOSITE7, - CX23418_COMPOSITE8, - - /* S-Video inputs consist of one luma input (In1-In4) ORed with one - chroma input (In5-In8) */ - CX23418_SVIDEO_LUMA1 = 0x10, - CX23418_SVIDEO_LUMA2 = 0x20, - CX23418_SVIDEO_LUMA3 = 0x30, - CX23418_SVIDEO_LUMA4 = 0x40, - CX23418_SVIDEO_CHROMA4 = 0x400, - CX23418_SVIDEO_CHROMA5 = 0x500, - CX23418_SVIDEO_CHROMA6 = 0x600, - CX23418_SVIDEO_CHROMA7 = 0x700, - CX23418_SVIDEO_CHROMA8 = 0x800, - - /* S-Video aliases for common luma/chroma combinations */ - CX23418_SVIDEO1 = 0x510, - CX23418_SVIDEO2 = 0x620, - CX23418_SVIDEO3 = 0x730, - CX23418_SVIDEO4 = 0x840, -}; - /* audio inputs */ #define CX18_CARD_INPUT_AUD_TUNER 1 #define CX18_CARD_INPUT_LINE_IN1 2 @@ -75,16 +45,6 @@ enum cx34180_video_input { #define CX18_CARD_MAX_AUDIO_INPUTS 3 #define CX18_CARD_MAX_TUNERS 2 -enum cx23418_audio_input { - /* Audio inputs: serial or In4-In8 */ - CX23418_AUDIO_SERIAL, - CX23418_AUDIO4 = 4, - CX23418_AUDIO5, - CX23418_AUDIO6, - CX23418_AUDIO7, - CX23418_AUDIO8, -}; - /* V4L2 capability aliases */ #define CX18_CAP_ENCODER (V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_TUNER | \ V4L2_CAP_AUDIO | V4L2_CAP_READWRITE) -- cgit v0.10.2 From 0367ca1bc7346d9ea89a4b4f1b9220489bda65a3 Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 9 Jun 2008 14:58:04 -0300 Subject: V4L/DVB (8010): em28xx: Properly register extensions for already attached devices em28xx-video.c - Properly handle loading of the module when multiple devices are already connected (such as at bootup). Before we were only calling dvb_init() against the last device in the list, so while we were handling subsequent adds properly, if there were multiple devices present on driver load, everybody except the last device would not get initialized. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c index fb163ec..285bc62 100644 --- a/drivers/media/video/em28xx/em28xx-video.c +++ b/drivers/media/video/em28xx/em28xx-video.c @@ -1848,32 +1848,28 @@ static DEFINE_MUTEX(em28xx_extension_devlist_lock); int em28xx_register_extension(struct em28xx_ops *ops) { - struct em28xx *h, *dev = NULL; - - list_for_each_entry(h, &em28xx_devlist, devlist) - dev = h; + struct em28xx *dev = NULL; mutex_lock(&em28xx_extension_devlist_lock); list_add_tail(&ops->next, &em28xx_extension_devlist); - if (dev) - ops->init(dev); - + list_for_each_entry(dev, &em28xx_devlist, devlist) { + if (dev) + ops->init(dev); + } printk(KERN_INFO "Em28xx: Initialized (%s) extension\n", ops->name); mutex_unlock(&em28xx_extension_devlist_lock); - return 0; } EXPORT_SYMBOL(em28xx_register_extension); void em28xx_unregister_extension(struct em28xx_ops *ops) { - struct em28xx *h, *dev = NULL; - - list_for_each_entry(h, &em28xx_devlist, devlist) - dev = h; + struct em28xx *dev = NULL; - if (dev) - ops->fini(dev); + list_for_each_entry(dev, &em28xx_devlist, devlist) { + if (dev) + ops->fini(dev); + } mutex_lock(&em28xx_extension_devlist_lock); printk(KERN_INFO "Em28xx: Removed (%s) extension\n", ops->name); -- cgit v0.10.2 From b38cc642000f0a262db367ffb95cd02ca2ead59b Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Mon, 9 Jun 2008 14:59:05 -0300 Subject: V4L/DVB (8011): em28xx: enable DVB for HVR-900 em28xx-cards.c - DVB support is supposed to be enabled for the first generation HVR-900. This device was confirmed with DVB by mkrufky when we did the original work in April, but I guess we forgot to set the flag. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 3e4f3c7..5cf7158 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -157,6 +157,7 @@ struct em28xx_board em28xx_boards[] = { .tda9887_conf = TDA9887_PRESENT, .tuner_type = TUNER_XC2028, .mts_firmware = 1, + .has_dvb = 1, .decoder = EM28XX_TVP5150, .input = { { .type = EM28XX_VMUX_TELEVISION, -- cgit v0.10.2 From f56ebe16b045861d26b81ef6683445c0144362b8 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 28 May 2008 21:55:06 -0300 Subject: V4L/DVB (8012): gl861: sleep a little to avoid I2C errors - add little sleep to avoid I2C errors arising on faster CPUs Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 0a8ac64..10cc436 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -47,6 +47,8 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, return -EINVAL; } + msleep(0); /* avoid I2C errors */ + return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type, value, index, rbuf, rlen, 2000); } -- cgit v0.10.2 From ea3a13b7a19f0d7d7344494047c9aa8bb32b6678 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 28 May 2008 22:04:12 -0300 Subject: V4L/DVB (8013): gl861: remove useless identify_state - remove useless identify_state - device is always warm Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 10cc436..9e53650 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -94,16 +94,6 @@ static struct i2c_algorithm gl861_i2c_algo = { }; /* Callbacks for DVB USB */ -static int gl861_identify_state(struct usb_device *udev, - struct dvb_usb_device_properties *props, - struct dvb_usb_device_description **desc, - int *cold) -{ - *cold = 0; - - return 0; -} - static struct zl10353_config gl861_zl10353_config = { .demod_address = 0x0f, .no_tuner = 1, @@ -174,7 +164,6 @@ static struct dvb_usb_device_properties gl861_properties = { .size_of_priv = 0, - .identify_state = gl861_identify_state, .num_adapters = 1, .adapter = {{ @@ -196,13 +185,15 @@ static struct dvb_usb_device_properties gl861_properties = { .num_device_descs = 2, .devices = { - { "MSI Mega Sky 55801 DVB-T USB2.0", - { &gl861_table[0], NULL }, - { NULL }, + { + .name = "MSI Mega Sky 55801 DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[0], NULL }, }, - { "A-LINK DTU DVB-T USB2.0", - { &gl861_table[1], NULL }, - { NULL }, + { + .name = "A-LINK DTU DVB-T USB2.0", + .cold_ids = { NULL }, + .warm_ids = { &gl861_table[1], NULL }, }, } }; -- cgit v0.10.2 From 1a78db826973b9fa658d72291ec2007889e2faf7 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 10 Jun 2008 11:41:58 -0300 Subject: V4L/DVB (8015): gl861: replace non critical msleep(0) with msleep(1) to be on the safe side - change msleep(0) to msleep(1) Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/gl861.c b/drivers/media/dvb/dvb-usb/gl861.c index 9e53650..037f7ff 100644 --- a/drivers/media/dvb/dvb-usb/gl861.c +++ b/drivers/media/dvb/dvb-usb/gl861.c @@ -47,7 +47,7 @@ static int gl861_i2c_msg(struct dvb_usb_device *d, u8 addr, return -EINVAL; } - msleep(0); /* avoid I2C errors */ + msleep(1); /* avoid I2C errors */ return usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), req, type, value, index, rbuf, rlen, 2000); -- cgit v0.10.2 From df619181631217e3166bb6c7538f981e0272617f Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 10 Jun 2008 12:34:35 -0300 Subject: V4L/DVB (8017): Ensure em28xx extensions only get run against devs that support them em28xx-audio.c em28xx-dvb.c - Em28xx extensions should ensure they are being only loaded against devices that support them. Deals with case where there are multiple em28xx devices, some of which have DVB (or ALSA) support and some do not. Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 92b2a6d..343dff0 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -415,6 +415,12 @@ static int em28xx_audio_init(struct em28xx *dev) static int devnr; int ret, err; + if (dev->has_audio_class) { + /* This device does not support the extension (in this case + the device is expecting the snd-usb-audio module */ + return 0; + } + printk(KERN_INFO "em28xx-audio.c: probing for em28x1 " "non standard usbaudio\n"); printk(KERN_INFO "em28xx-audio.c: Copyright (C) 2006 Markus " @@ -458,6 +464,12 @@ static int em28xx_audio_fini(struct em28xx *dev) if (dev == NULL) return 0; + if (dev->has_audio_class) { + /* This device does not support the extension (in this case + the device is expecting the snd-usb-audio module */ + return 0; + } + if (dev->adev) { snd_card_free(dev->adev->sndcard); kfree(dev->adev); diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c index 8cf4983..0b2333e 100644 --- a/drivers/media/video/em28xx/em28xx-dvb.c +++ b/drivers/media/video/em28xx/em28xx-dvb.c @@ -382,6 +382,11 @@ static int dvb_init(struct em28xx *dev) int result = 0; struct em28xx_dvb *dvb; + if (!dev->has_dvb) { + /* This device does not support the extension */ + return 0; + } + dvb = kzalloc(sizeof(struct em28xx_dvb), GFP_KERNEL); if (dvb == NULL) { @@ -444,6 +449,11 @@ out_free: static int dvb_fini(struct em28xx *dev) { + if (!dev->has_dvb) { + /* This device does not support the extension */ + return 0; + } + if (dev->dvb) { unregister_dvb(dev->dvb); dev->dvb = NULL; -- cgit v0.10.2 From a8a1f8cc0cae07c209f13857adbdd4b87b36cdde Mon Sep 17 00:00:00 2001 From: Devin Heitmueller Date: Tue, 10 Jun 2008 12:35:42 -0300 Subject: V4L/DVB (8018): Add em2860 chip ID em28xx-cards.c em28xx-reg.h - Add em2860 chip ID (seen on Pointnix Intra-Oral Camera) http://www.pointnix.com/ENG/dental/product_02.asp Signed-off-by: Devin Heitmueller Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c index 5cf7158..8cbda43 100644 --- a/drivers/media/video/em28xx/em28xx-cards.c +++ b/drivers/media/video/em28xx/em28xx-cards.c @@ -525,6 +525,9 @@ void em28xx_pre_card_setup(struct em28xx *dev) rc = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); if (rc > 0) { switch (rc) { + case CHIP_ID_EM2860: + em28xx_info("chip ID is em2860\n"); + break; case CHIP_ID_EM2883: em28xx_info("chip ID is em2882/em2883\n"); dev->wait_after_write = 0; diff --git a/drivers/media/video/em28xx/em28xx-reg.h b/drivers/media/video/em28xx/em28xx-reg.h index 9058bed..fac1ab2 100644 --- a/drivers/media/video/em28xx/em28xx-reg.h +++ b/drivers/media/video/em28xx/em28xx-reg.h @@ -84,5 +84,6 @@ /* FIXME: Need to be populated with the other chip ID's */ enum em28xx_chip_id { + CHIP_ID_EM2860 = 34, CHIP_ID_EM2883 = 36, }; -- cgit v0.10.2 From a14fe9605bfdfe360b97acc9ef912779eb860507 Mon Sep 17 00:00:00 2001 From: Dmitri Belimov Date: Tue, 10 Jun 2008 14:19:31 -0300 Subject: V4L/DVB (8020): Fix callbacks functions of saa7134_empress If I try v4l2-ctl --all -d /dev/video1 or v4l2-ctl --streamon -d /dev/video1 modules crashed: *pde = 00000000 Modules linked in: ac battery loop saa7134_empress(F) saa6752hs(F) tuner_simple(F) tuner_types(F) tea5767(F) tda9887(F) tda8290(F) tea5761(F) tuner(F) snd_cmipci snd_pcm snd_page_alloc snd_opl3_lib saa7134(F) snd_mpu401 parport_pc parport snd_timer snd_hwdep snd_mpu401_uart floppy rtc psmouse videodev(F) v4l1_compat(F) compat_ioctl32(F) v4l2_common(F) videobuf_dma_sg(F) videobuf_core(F) snd_rawmidi snd_seq_device via_ircc pcspkr snd ir_kbd_i2c(F) irda soundcore ir_common(F) crc_ccitt tveeprom(F) i2c_viapro i2c_core button via_agp agpgart evdev ext3 jbd mbcache ide_cd_mod cdrom ide_disk 8139cp via82cxxx ide_core 8139too mii ehci_hcd uhci_hcd usbcore thermal processor fan EIP is at __mutex_lock_slowpath+0x29/0x7b DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 Process v4l2-ctl (pid: 2742, ti=ced7e000 task=cf325260 task.ti=ced7e000) d08e5411 00000000 ced7fed4 00000000 d0975acb 40045612 cfa86ee0 ffffffcd cf2b7000 ced7febc c03858d6 00000019 00000292 d089e4ec cf37b2a0 d089e4a0 Call Trace: [] mutex_lock+0xa/0xb [] videobuf_streamon+0xf/0x9a [videobuf_core] [] __video_do_ioctl+0x136a/0x2d68 [videodev] [] task_end_request+0x40/0x51 [ide_core] [] ide_intr+0x187/0x192 [ide_core] [] mntput_no_expire+0x11/0x64 [] path_walk+0x90/0x98 [] video_ioctl2+0x173/0x239 [videodev] [] filemap_fault+0x202/0x370 [] __do_fault+0x2c3/0x2fe [] handle_mm_fault+0x22a/0x49f [] vfs_ioctl+0x47/0x5d [] do_vfs_ioctl+0x245/0x258 [] sys_ioctl+0x41/0x5b [] sysenter_past_esp+0x5f/0x85 ======================= After this fix all of that commands works without problem: v4l2-ctl --all -d /dev/video1 Driver Info: Driver name : saa7134 Card type : Beholder BeholdTV M6 Extra Bus info : PCI:0000:00:0d.0 Driver version: 526 Capabilities : 0x05000001 Video Capture Read/Write Streaming Format Video Capture: Width/Height : 720/576 Pixel Format : MPEG Field : Any Bytes per Line: 0 Size Image : 58656 Colorspace : Unknown (00000000) Video input : 0 (CCIR656) Video Standard = 0x000000ff PAL-B/B1/G/H/I/D/D1/K P.S. data from /dev/video1 is not correct :(( . Signed-off-by: Beholder Intl. Ltd. Dmitry Belimov Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 81431ee..94b2585 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -218,8 +218,7 @@ static int empress_enum_fmt_cap(struct file *file, void *priv, static int empress_g_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; saa7134_i2c_call_clients(dev, VIDIOC_G_FMT, f); @@ -232,8 +231,7 @@ static int empress_g_fmt_cap(struct file *file, void *priv, static int empress_s_fmt_cap(struct file *file, void *priv, struct v4l2_format *f) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; saa7134_i2c_call_clients(dev, VIDIOC_S_FMT, f); @@ -247,8 +245,7 @@ static int empress_s_fmt_cap(struct file *file, void *priv, static int empress_reqbufs(struct file *file, void *priv, struct v4l2_requestbuffers *p) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_reqbufs(&dev->empress_tsq, p); } @@ -256,24 +253,21 @@ static int empress_reqbufs(struct file *file, void *priv, static int empress_querybuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_querybuf(&dev->empress_tsq, b); } static int empress_qbuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_qbuf(&dev->empress_tsq, b); } static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_dqbuf(&dev->empress_tsq, b, file->f_flags & O_NONBLOCK); @@ -282,8 +276,7 @@ static int empress_dqbuf(struct file *file, void *priv, struct v4l2_buffer *b) static int empress_streamon(struct file *file, void *priv, enum v4l2_buf_type type) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_streamon(&dev->empress_tsq); } @@ -291,8 +284,7 @@ static int empress_streamon(struct file *file, void *priv, static int empress_streamoff(struct file *file, void *priv, enum v4l2_buf_type type) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; return videobuf_streamoff(&dev->empress_tsq); } @@ -300,8 +292,7 @@ static int empress_streamoff(struct file *file, void *priv, static int empress_s_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; /* count == 0 is abused in saa6752hs.c, so that special case is handled here explicitly. */ @@ -320,8 +311,7 @@ static int empress_s_ext_ctrls(struct file *file, void *priv, static int empress_g_ext_ctrls(struct file *file, void *priv, struct v4l2_ext_controls *ctrls) { - struct saa7134_fh *fh = priv; - struct saa7134_dev *dev = fh->dev; + struct saa7134_dev *dev = file->private_data; if (ctrls->ctrl_class != V4L2_CTRL_CLASS_MPEG) return -EINVAL; -- cgit v0.10.2 From 913f5fc209247b607b1994a710315966f4f9d358 Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Tue, 10 Jun 2008 15:18:16 -0300 Subject: V4L/DVB (8022): saa7134: fix race between opening and closing the device decrementing dev->empress_users should be done as last action of ts_release, because it sleeps and write access to dev->empress_started is not protected in any way (additionally closing thread could mute audio after opening thread unmuted it) Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 94b2585..1c8cd0e 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -112,7 +112,6 @@ static int ts_release(struct inode *inode, struct file *file) videobuf_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); - dev->empress_users--; /* stop the encoder */ ts_reset_encoder(dev); @@ -121,6 +120,8 @@ static int ts_release(struct inode *inode, struct file *file) saa_writeb(SAA7134_AUDIO_MUTE_CTRL, saa_readb(SAA7134_AUDIO_MUTE_CTRL) | (1 << 6)); + dev->empress_users--; + return 0; } -- cgit v0.10.2 From 83ee87a31dc43a5fd6dee3562c146033c3a4cb39 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 14 Jun 2008 09:41:18 -0300 Subject: V4L/DVB (8026): Avoids an OOPS if dev struct can't be successfully recovered On some alsa versions, it seems that snd_pcm_substream_chip(substream) is returning a NULL pointer. This causes an OOPS, as reported by: https://bugs.launchpad.net/ubuntu/+source/linux-ubuntu-modules-2.6.24/+bug/212271 https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/212960 This patch avoids the OOPS by not letting and open() succeed. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx88/cx88-alsa.c b/drivers/media/video/cx88/cx88-alsa.c index e976fc6..80c8883 100644 --- a/drivers/media/video/cx88/cx88-alsa.c +++ b/drivers/media/video/cx88/cx88-alsa.c @@ -332,6 +332,12 @@ static int snd_cx88_pcm_open(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; int err; + if (!chip) { + printk(KERN_ERR "BUG: cx88 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + err = snd_pcm_hw_constraint_pow2(runtime, 0, SNDRV_PCM_HW_PARAM_PERIODS); if (err < 0) goto _error; diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 343dff0..3c00610 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -268,6 +268,12 @@ static int snd_em28xx_capture_open(struct snd_pcm_substream *substream) dprintk("opening device and trying to acquire exclusive lock\n"); + if (!dev) { + printk(KERN_ERR "BUG: em28xx can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + /* Sets volume, mute, etc */ dev->mute = 0; diff --git a/drivers/media/video/saa7134/saa7134-alsa.c b/drivers/media/video/saa7134/saa7134-alsa.c index ba30824..f118de6 100644 --- a/drivers/media/video/saa7134/saa7134-alsa.c +++ b/drivers/media/video/saa7134/saa7134-alsa.c @@ -613,9 +613,15 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream) struct snd_pcm_runtime *runtime = substream->runtime; snd_card_saa7134_pcm_t *pcm; snd_card_saa7134_t *saa7134 = snd_pcm_substream_chip(substream); - struct saa7134_dev *dev = saa7134->dev; + struct saa7134_dev *dev; int amux, err; + if (!saa7134) { + printk(KERN_ERR "BUG: saa7134 can't find device struct." + " Can't proceed with open\n"); + return -ENODEV; + } + dev = saa7134->dev; mutex_lock(&dev->dmasound.lock); dev->dmasound.read_count = 0; -- cgit v0.10.2 From b25fed115a8bd8d39d14ce0d03e808272a401d67 Mon Sep 17 00:00:00 2001 From: Matthias Schwarzott Date: Fri, 13 Jun 2008 19:28:17 -0300 Subject: V4L/DVB (8027): saa7134: Avermedia A700: only s-video and composite input are working Describe exactly that only s-video and composite input are working on Avermedia A700 Signed-off-by: Matthias Schwarzott Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index b111903..21a7612 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -5615,7 +5615,8 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x80040100, 0x80040100); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x80040100, 0x00040100); printk("%s: %s: hybrid analog/dvb card\n" - "%s: Sorry, only the analog inputs are supported for now.\n", + "%s: Sorry, only analog s-video and composite input " + "are supported for now.\n", dev->name, card(dev).name, dev->name); break; } -- cgit v0.10.2 From bc36ec746409e4e4719b94a86dc0d8cbeb6f439f Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 14 Jun 2008 10:44:04 -0300 Subject: V4L/DVB (8028): Improve error messages for tda1004x attach A fresh copy of v.29 firmware, using get_firmware, is leading to an invalid firmware: DVB: registering new adapter (saa7133[0]) DVB: registering frontend 0 (Philips TDA10046H DVB-T)... tda1004x: setting up plls for 48MHz sampling clock tda1004x: found firmware revision ff -- invalid tda1004x: trying to boot from eeprom tda1004x: found firmware revision ff -- invalid tda1004x: waiting for firmware upload... tda1004x: Error during firmware upload tda1004x: found firmware revision ff -- invalid tda1004x: firmware upload failed Sometimes, loading/unloading this firmware makes tda1004x to return an invalid ID. However, there were no printk messages to help to identify what were the cause for the error. With this patch, it will now print: Invalid tda1004x ID = 0xff. Can't proceed saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed Tested with LifeView FlyDVB-T Hybrid Cardbus/MSI TV @nywhere A/D NB Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 4997384..3993d1c 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -1248,11 +1248,14 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + u8 id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10045 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1260,7 +1263,9 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10045; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x25) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id != 0x25) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } @@ -1307,11 +1312,14 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; + u8 id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); - if (!state) + if (!state) { + printk(KERN_ERR "Can't alocate memory for tda10046 state\n"); return NULL; + } /* setup the state */ state->config = config; @@ -1319,7 +1327,9 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, state->demod_type = TDA1004X_DEMOD_TDA10046; /* check if the demod is there */ - if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) { + id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id != 0x46) { + printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); return NULL; } diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 726f01c..653107c 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -1091,7 +1091,8 @@ static int dvb_init(struct saa7134_dev *dev) ads_tech_duo_config.tuner_address); goto dettach_frontend; } - } + } else + wprintk("failed to attach tda10046\n"); break; case SAA7134_BOARD_TEVION_DVBT_220RF: if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, -- cgit v0.10.2 From 0e7830b50b20fcc25f21f79b7734102284d7c8f9 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Sat, 14 Jun 2008 11:27:34 -0300 Subject: V4L/DVB (8029): Improve error message at tda1004x_attach When an error occurs at firmware loading, sometimes, tda1004x stops answering. Instead of reporting such error, attach code were assuming that the device were answering an invalid ID (0xff). This can be seen when enabling debug options: tda1004x: tda1004x_read_byte: reg=0x0 tda1004x: tda1004x_read_byte: error reg=0x0, ret=-5 Now, instead of reporting an invalid ID, it will report the correct error: tda10046: chip is not answering. Giving up. saa7133[0]/dvb: failed to attach tda10046 saa7133[0]/dvb: frontend initialization failed A possible improvement would be trying to reset the device. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 3993d1c..a0d6386 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -1248,7 +1248,7 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; - u8 id; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); @@ -1264,6 +1264,12 @@ struct dvb_frontend* tda10045_attach(const struct tda1004x_config* config, /* check if the demod is there */ id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } + if (id != 0x25) { printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); @@ -1312,7 +1318,7 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, struct i2c_adapter* i2c) { struct tda1004x_state *state; - u8 id; + int id; /* allocate memory for the internal state */ state = kmalloc(sizeof(struct tda1004x_state), GFP_KERNEL); @@ -1328,6 +1334,11 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, /* check if the demod is there */ id = tda1004x_read_byte(state, TDA1004X_CHIPID); + if (id < 0) { + printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n"); + kfree(state); + return NULL; + } if (id != 0x46) { printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id); kfree(state); -- cgit v0.10.2 From 44e645c20304bbe0a72cb994d9baf4b5727d7cec Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 8 Jun 2008 20:10:29 -0300 Subject: V4L/DVB (8034): tda18271: fix IF notch frequency handling The IF notch bit gets unset when we update the Main Post Div register value, before we have a chance to write the desired IF notch setting to the tuner. Move the IF notch configuration to after we update MPD. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 89c01fb..98acd58 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -45,6 +45,21 @@ static inline int charge_pump_source(struct dvb_frontend *fe, int force) TDA18271_MAIN_PLL, force); } +static inline void tda18271_set_if_notch(struct dvb_frontend *fe) +{ + struct tda18271_priv *priv = fe->tuner_priv; + unsigned char *regs = priv->tda18271_regs; + + switch (priv->mode) { + case TDA18271_ANALOG: + regs[R_MPD] &= ~0x80; /* IF notch = 0 */ + break; + case TDA18271_DIGITAL: + regs[R_MPD] |= 0x80; /* IF notch = 1 */ + break; + } +} + static int tda18271_channel_configuration(struct dvb_frontend *fe, struct tda18271_std_map_item *map, u32 freq, u32 bw) @@ -66,19 +81,10 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, /* set cal mode to normal */ regs[R_EP4] &= ~0x03; - /* update IF output level & IF notch frequency */ + /* update IF output level */ regs[R_EP4] &= ~0x1c; /* clear if level bits */ regs[R_EP4] |= (map->if_lvl << 2); - switch (priv->mode) { - case TDA18271_ANALOG: - regs[R_MPD] &= ~0x80; /* IF notch = 0 */ - break; - case TDA18271_DIGITAL: - regs[R_MPD] |= 0x80; /* IF notch = 1 */ - break; - } - /* update FM_RFn */ regs[R_EP4] &= ~0x80; regs[R_EP4] |= map->fm_rfn << 7; @@ -135,6 +141,7 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, switch (priv->role) { case TDA18271_MASTER: tda18271_calc_main_pll(fe, N); + tda18271_set_if_notch(fe); tda18271_write_regs(fe, R_MPD, 4); break; case TDA18271_SLAVE: @@ -142,6 +149,7 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, tda18271_write_regs(fe, R_CPD, 4); regs[R_MPD] = regs[R_CPD] & 0x7f; + tda18271_set_if_notch(fe); tda18271_write_regs(fe, R_MPD, 1); break; } @@ -507,7 +515,7 @@ static int tda18271_powerscan_init(struct dvb_frontend *fe) /* set cal mode to normal */ regs[R_EP4] &= ~0x03; - /* update IF output level & IF notch frequency */ + /* update IF output level */ regs[R_EP4] &= ~0x1c; /* clear if level bits */ ret = tda18271_write_regs(fe, R_EP3, 2); -- cgit v0.10.2 From 119a7c7e34b5e5fa65051960ca05000a19dbce85 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Sun, 8 Jun 2008 22:12:37 -0300 Subject: V4L/DVB (8035): tda18271: dont touch EB14 if rf_cal lookup is out of range The TDA18271HD/C1 rf_cal map lookup is expected to go out of range outside of the frequency window 41 MHz - 61.1 MHz. In these cases, the internal RF tracking filters calibration mechanism is used. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-common.c b/drivers/media/common/tuners/tda18271-common.c index f1894fe..6fb5b45 100644 --- a/drivers/media/common/tuners/tda18271-common.c +++ b/drivers/media/common/tuners/tda18271-common.c @@ -649,9 +649,17 @@ int tda18271_calc_rf_cal(struct dvb_frontend *fe, u32 *freq) u8 val; int ret = tda18271_lookup_map(fe, RF_CAL, freq, &val); + /* The TDA18271HD/C1 rf_cal map lookup is expected to go out of range + * for frequencies above 61.1 MHz. In these cases, the internal RF + * tracking filters calibration mechanism is used. + * + * There is no need to warn the user about this. + */ + if (ret < 0) + goto fail; regs[R_EB14] = val; - +fail: return ret; } -- cgit v0.10.2 From 51858d13612a06494beb08616f8a93bdb2688e4c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Mon, 9 Jun 2008 02:03:31 -0300 Subject: V4L/DVB (8036): tda18271: toggle rf agc speed mode on TDA18271HD/C2 only Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 98acd58..1ebf95d 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -75,8 +75,10 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, regs[R_EP3] &= ~0x1f; /* clear std bits */ regs[R_EP3] |= (map->agc_mode << 3) | map->std; - /* set rfagc to high speed mode */ - regs[R_EP3] &= ~0x04; + if (priv->id == TDA18271HDC2) { + /* set rfagc to high speed mode */ + regs[R_EP3] &= ~0x04; + } /* set cal mode to normal */ regs[R_EP4] &= ~0x03; @@ -168,12 +170,14 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, msleep(20); - /* set rfagc to normal speed mode */ - if (map->fm_rfn) - regs[R_EP3] &= ~0x04; - else - regs[R_EP3] |= 0x04; - ret = tda18271_write_regs(fe, R_EP3, 1); + if (priv->id == TDA18271HDC2) { + /* set rfagc to normal speed mode */ + if (map->fm_rfn) + regs[R_EP3] &= ~0x04; + else + regs[R_EP3] |= 0x04; + ret = tda18271_write_regs(fe, R_EP3, 1); + } fail: return ret; } -- cgit v0.10.2 From 7ae1ac4c1db5a3647604acb00d736f17af6999b7 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Wed, 11 Jun 2008 13:52:49 -0300 Subject: V4L/DVB (8037): tda18271: ensure that the thermometer is off during channel configuration Having the thermometer on during channel configuration could cause tuning instability. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/tda18271-fe.c b/drivers/media/common/tuners/tda18271-fe.c index 1ebf95d..93063c6 100644 --- a/drivers/media/common/tuners/tda18271-fe.c +++ b/drivers/media/common/tuners/tda18271-fe.c @@ -103,6 +103,9 @@ static int tda18271_channel_configuration(struct dvb_frontend *fe, /* disable Power Level Indicator */ regs[R_EP1] |= 0x40; + /* make sure thermometer is off */ + regs[R_TM] &= ~0x10; + /* frequency dependent parameters */ tda18271_calc_ir_measure(fe, &freq); -- cgit v0.10.2 From 02da465945ae0a277aadf2bf37965a9e6c28f8c3 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 13 Jun 2008 09:03:45 -0300 Subject: V4L/DVB (8039): pxa-camera: fix platform_get_irq() error handling. platform_get_irq() returns a negative value on error, not 0. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index 7cc8e9b..5ec5bb9 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1019,12 +1019,12 @@ static int pxa_camera_probe(struct platform_device *pdev) struct pxa_camera_dev *pcdev; struct resource *res; void __iomem *base; - unsigned int irq; + int irq; int err = 0; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); - if (!res || !irq) { + if (!res || irq < 0) { err = -ENODEV; goto exit; } -- cgit v0.10.2 From 3cfdc7f25b3116d57e91427caada74dd69bfbc06 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 13 Jun 2008 09:11:01 -0300 Subject: V4L/DVB (8040): soc-camera: remove soc_camera_host_class class Devices can either be class devices or bus devices, not both at the same time. Soc-camera host devices usually have a platform device as their parent. Trying to also register them with a class crashes the kernel, when linked statically. Interestingly, it works when built as a module. Thanks to Paulius Zaleckas for reporting. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/soc_camera.c b/drivers/media/video/soc_camera.c index a1b9244..d015bfe 100644 --- a/drivers/media/video/soc_camera.c +++ b/drivers/media/video/soc_camera.c @@ -763,15 +763,6 @@ static struct device_driver ic_drv = { .owner = THIS_MODULE, }; -/* - * Image capture host - this is a host device, not a bus device, so, - * no bus reference, no probing. - */ -static struct class soc_camera_host_class = { - .owner = THIS_MODULE, - .name = "camera_host", -}; - static void dummy_release(struct device *dev) { } @@ -801,7 +792,6 @@ int soc_camera_host_register(struct soc_camera_host *ici) /* Number might be equal to the platform device ID */ sprintf(ici->dev.bus_id, "camera_host%d", ici->nr); - ici->dev.class = &soc_camera_host_class; mutex_lock(&list_lock); list_for_each_entry(ix, &hosts, list) { @@ -1003,14 +993,9 @@ static int __init soc_camera_init(void) ret = driver_register(&ic_drv); if (ret) goto edrvr; - ret = class_register(&soc_camera_host_class); - if (ret) - goto eclr; return 0; -eclr: - driver_unregister(&ic_drv); edrvr: bus_unregister(&soc_camera_bus_type); return ret; @@ -1018,7 +1003,6 @@ edrvr: static void __exit soc_camera_exit(void) { - class_unregister(&soc_camera_host_class); driver_unregister(&ic_drv); bus_unregister(&soc_camera_bus_type); } -- cgit v0.10.2 From 3b9408870757bd9e07fd03ac6318258f22b8dfa3 Mon Sep 17 00:00:00 2001 From: Austin Lund Date: Fri, 13 Jun 2008 11:02:43 -0300 Subject: V4L/DVB (8042): DVB-USB UMT-010 channel scan oops In the umt-010 driver the struct umt_properties sets the number of URBs for transfer to 20. But in dvb-usb.h MAX_NO_URBS_FOR_DATA_STREAM is set to 10. Not surprisingly this causes an oops for all devices which use the umt-010 chipset when they are inserted. fix on Kaffeine channel scan for Initialize stream count using MAX_NO_URBS_FOR_DATA_STREAM. Signed-off-by: Tim Gardner Signed-off-by: maximilian attems Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c index 9e7653b..118aab1 100644 --- a/drivers/media/dvb/dvb-usb/umt-010.c +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -107,7 +107,7 @@ static struct dvb_usb_device_properties umt_properties = { /* parameter for the MPEG2-data transfer */ .stream = { .type = USB_BULK, - .count = 20, + .count = MAX_NO_URBS_FOR_DATA_STREAM, .endpoint = 0x06, .u = { .bulk = { -- cgit v0.10.2 From 104fe9a2d2a56f25fb95800a7ab0f7600dd6879c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 13 Jun 2008 03:29:43 -0300 Subject: V4L/DVB (8043): au0828: add support for additional USB device id's Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/Documentation/video4linux/CARDLIST.au0828 b/Documentation/video4linux/CARDLIST.au0828 index aaae360..86d1c8e 100644 --- a/Documentation/video4linux/CARDLIST.au0828 +++ b/Documentation/video4linux/CARDLIST.au0828 @@ -1,4 +1,4 @@ 0 -> Unknown board (au0828) - 1 -> Hauppauge HVR950Q (au0828) [2040:7200] + 1 -> Hauppauge HVR950Q (au0828) [2040:7200,2040:7210,2040:7217,2040:721b,2040:721f,2040:7280,0fd9:0008] 2 -> Hauppauge HVR850 (au0828) [2040:7240] 3 -> DViCO FusionHDTV USB (au0828) [0fe9:d620] diff --git a/drivers/media/video/au0828/au0828-cards.c b/drivers/media/video/au0828/au0828-cards.c index a2a6983..898e123 100644 --- a/drivers/media/video/au0828/au0828-cards.c +++ b/drivers/media/video/au0828/au0828-cards.c @@ -77,8 +77,14 @@ static void hauppauge_eeprom(struct au0828_dev *dev, u8 *eeprom_data) /* Make sure we support the board model */ switch (tv.model) { + case 72000: /* WinTV-HVR950q (Retail, IR, ATSC/QAM */ case 72001: /* WinTV-HVR950q (Retail, IR, ATSC/QAM and basic analog video */ + case 72211: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72221: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72231: /* WinTV-HVR950q (OEM, IR, ATSC/QAM and basic analog video */ + case 72241: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM and basic analog video */ case 72301: /* WinTV-HVR850 (Retail, IR, ATSC and basic analog video */ + case 72500: /* WinTV-HVR950q (OEM, No IR, ATSC/QAM */ break; default: printk(KERN_WARNING "%s: warning: " @@ -175,6 +181,18 @@ struct usb_device_id au0828_usb_id_table [] = { .driver_info = AU0828_BOARD_HAUPPAUGE_HVR850 }, { USB_DEVICE(0x0fe9, 0xd620), .driver_info = AU0828_BOARD_DVICO_FUSIONHDTV7 }, + { USB_DEVICE(0x2040, 0x7210), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7217), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721b), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x721f), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x2040, 0x7280), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, + { USB_DEVICE(0x0fd9, 0x0008), + .driver_info = AU0828_BOARD_HAUPPAUGE_HVR950Q }, { }, }; -- cgit v0.10.2 From 74d50724a02d7cdc7f7887411518ec43d0251b97 Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Fri, 13 Jun 2008 20:33:23 -0300 Subject: V4L/DVB (8044): au8522: tuning optimizations If the current modulation and frequency is already set to the desired parameters, then don't re-tune. Don't store current frequency until after we've tuned successfully. Force a re-tune after resume from standby. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 084a280..978a287 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -463,10 +463,13 @@ static int au8522_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_parameters *p) { struct au8522_state *state = fe->demodulator_priv; + int ret = -EINVAL; dprintk("%s(frequency=%d)\n", __func__, p->frequency); - state->current_frequency = p->frequency; + if ((state->current_frequency == p->frequency) && + (state->current_modulation == p->u.vsb.modulation)) + return 0; au8522_enable_modulation(fe, p->u.vsb.modulation); @@ -476,11 +479,16 @@ static int au8522_set_frontend(struct dvb_frontend *fe, if (fe->ops.tuner_ops.set_params) { if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 1); - fe->ops.tuner_ops.set_params(fe, p); + ret = fe->ops.tuner_ops.set_params(fe, p); if (fe->ops.i2c_gate_ctrl) fe->ops.i2c_gate_ctrl(fe, 0); } + if (ret < 0) + return ret; + + state->current_frequency = p->frequency; + return 0; } @@ -498,6 +506,16 @@ static int au8522_init(struct dvb_frontend *fe) return 0; } +static int au8522_sleep(struct dvb_frontend *fe) +{ + struct au8522_state *state = fe->demodulator_priv; + dprintk("%s()\n", __func__); + + state->current_frequency = 0; + + return 0; +} + static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) { struct au8522_state *state = fe->demodulator_priv; @@ -672,6 +690,7 @@ static struct dvb_frontend_ops au8522_ops = { }, .init = au8522_init, + .sleep = au8522_sleep, .i2c_gate_ctrl = au8522_i2c_gate_ctrl, .set_frontend = au8522_set_frontend, .get_frontend = au8522_get_frontend, -- cgit v0.10.2 From 6e501a3f4a7259b1c04aa6cbdfe64376afc9f59c Mon Sep 17 00:00:00 2001 From: Tim Farrington Date: Sun, 15 Jun 2008 13:33:42 -0300 Subject: V4L/DVB (8048): saa7134: Fix entries for Avermedia A16d and Avermedia E506 Also, adds IR table for Avermedia A16d Signed-off-by: Tim Farrington Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/ir-keymaps.c b/drivers/media/common/ir-keymaps.c index a348581..8fa91f8 100644 --- a/drivers/media/common/ir-keymaps.c +++ b/drivers/media/common/ir-keymaps.c @@ -2201,3 +2201,41 @@ IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE] = { [0x25] = KEY_POWER, /* power */ }; EXPORT_SYMBOL_GPL(ir_codes_powercolor_real_angel); + +IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE] = { + [0x20] = KEY_LIST, + [0x00] = KEY_POWER, + [0x28] = KEY_1, + [0x18] = KEY_2, + [0x38] = KEY_3, + [0x24] = KEY_4, + [0x14] = KEY_5, + [0x34] = KEY_6, + [0x2c] = KEY_7, + [0x1c] = KEY_8, + [0x3c] = KEY_9, + [0x12] = KEY_SUBTITLE, + [0x22] = KEY_0, + [0x32] = KEY_REWIND, + [0x3a] = KEY_SHUFFLE, + [0x02] = KEY_PRINT, + [0x11] = KEY_CHANNELDOWN, + [0x31] = KEY_CHANNELUP, + [0x0c] = KEY_ZOOM, + [0x1e] = KEY_VOLUMEDOWN, + [0x3e] = KEY_VOLUMEUP, + [0x0a] = KEY_MUTE, + [0x04] = KEY_AUDIO, + [0x26] = KEY_RECORD, + [0x06] = KEY_PLAY, + [0x36] = KEY_STOP, + [0x16] = KEY_PAUSE, + [0x2e] = KEY_REWIND, + [0x0e] = KEY_FASTFORWARD, + [0x30] = KEY_TEXT, + [0x21] = KEY_GREEN, + [0x01] = KEY_BLUE, + [0x08] = KEY_EPG, + [0x2a] = KEY_MENU, +}; +EXPORT_SYMBOL_GPL(ir_codes_avermedia_a16d); diff --git a/drivers/media/video/saa7134/saa7134-cards.c b/drivers/media/video/saa7134/saa7134-cards.c index 21a7612..2618cfa 100644 --- a/drivers/media/video/saa7134/saa7134-cards.c +++ b/drivers/media/video/saa7134/saa7134-cards.c @@ -4114,11 +4114,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, - /* - TODO: .mpeg = SAA7134_MPEG_DVB, - */ - .inputs = {{ .name = name_tv, .vmux = 1, @@ -4157,7 +4153,7 @@ struct saa7134_board saa7134_boards[] = { } }, .radio = { .name = name_radio, - .amux = LINE1, + .amux = TV, }, }, [SAA7134_BOARD_AVERMEDIA_M115] = { @@ -4167,6 +4163,7 @@ struct saa7134_board saa7134_boards[] = { .radio_type = UNSET, .tuner_addr = ADDR_UNSET, .radio_addr = ADDR_UNSET, + .mpeg = SAA7134_MPEG_DVB, .inputs = {{ .name = name_tv, .vmux = 1, @@ -5351,22 +5348,21 @@ static int saa7134_xc2028_callback(struct saa7134_dev *dev, { switch (command) { case XC2028_TUNER_RESET: - saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); - saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); - mdelay(250); - saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0); - saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0); - mdelay(250); - saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x06e20000, 0x06e20000); - saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x06a20000, 0x06a20000); - mdelay(250); - saa_andorl(SAA7133_ANALOG_IO_SELECT >> 2, 0x02, 0x02); - saa_andorl(SAA7134_ANALOG_IN_CTRL1 >> 2, 0x81, 0x81); - saa_andorl(SAA7134_AUDIO_CLOCK0 >> 2, 0x03187de7, 0x03187de7); - saa_andorl(SAA7134_AUDIO_PLL_CTRL >> 2, 0x03, 0x03); - saa_andorl(SAA7134_AUDIO_CLOCKS_PER_FIELD0 >> 2, - 0x0001e000, 0x0001e000); - return 0; + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00000000); + saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x00008000, 0x00008000); + switch (dev->board) { + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); + break; + } + return 0; } return -EINVAL; } @@ -5553,9 +5549,7 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0x08000000, 0x00000000); break; case SAA7134_BOARD_AVERMEDIA_CARDBUS: - case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: case SAA7134_BOARD_AVERMEDIA_M115: - case SAA7134_BOARD_AVERMEDIA_A16D: /* power-down tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0xffffffff, 0); saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0); @@ -5565,6 +5559,18 @@ int saa7134_board_init1(struct saa7134_dev *dev) saa_andorl(SAA7134_GPIO_GPSTATUS0 >> 2, 0xffffffff, 0xffffffff); msleep(10); break; + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + saa7134_set_gpio(dev, 23, 0); + msleep(10); + saa7134_set_gpio(dev, 23, 1); + break; + case SAA7134_BOARD_AVERMEDIA_A16D: + saa7134_set_gpio(dev, 21, 0); + msleep(10); + saa7134_set_gpio(dev, 21, 1); + msleep(1); + dev->has_remote = SAA7134_REMOTE_GPIO; + break; case SAA7134_BOARD_BEHOLD_COLUMBUS_TVFM: /* power-down tuner chip */ saa_andorl(SAA7134_GPIO_GPMODE0 >> 2, 0x000A8004, 0x000A8004); @@ -5676,6 +5682,7 @@ static void saa7134_tuner_setup(struct saa7134_dev *dev) switch (dev->board) { case SAA7134_BOARD_AVERMEDIA_A16D: + case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: ctl.demod = XC3028_FE_ZARLINK456; break; default: diff --git a/drivers/media/video/saa7134/saa7134-dvb.c b/drivers/media/video/saa7134/saa7134-dvb.c index 653107c..341b101 100644 --- a/drivers/media/video/saa7134/saa7134-dvb.c +++ b/drivers/media/video/saa7134/saa7134-dvb.c @@ -153,12 +153,12 @@ static int mt352_aver777_init(struct dvb_frontend* fe) return 0; } -static int mt352_aver_a16d_init(struct dvb_frontend *fe) +static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) { - static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; - static u8 reset [] = { RESET, 0x80 }; - static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; - static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; + static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; + static u8 reset [] = { RESET, 0x80 }; + static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; + static u8 agc_cfg [] = { AGC_TARGET, 0xe }; static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; mt352_write(fe, clock_config, sizeof(clock_config)); @@ -167,12 +167,9 @@ static int mt352_aver_a16d_init(struct dvb_frontend *fe) mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); mt352_write(fe, agc_cfg, sizeof(agc_cfg)); mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); - return 0; } - - static int mt352_pinnacle_tuner_set_params(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { @@ -215,14 +212,10 @@ static struct mt352_config avermedia_777 = { .demod_init = mt352_aver777_init, }; -static struct mt352_config avermedia_16d = { - .demod_address = 0xf, - .demod_init = mt352_aver_a16d_init, -}; - -static struct mt352_config avermedia_e506r_mt352_dev = { +static struct mt352_config avermedia_xc3028_mt352_dev = { .demod_address = (0x1e >> 1), .no_tuner = 1, + .demod_init = mt352_avermedia_xc3028_init, }; /* ================================================================== @@ -975,9 +968,10 @@ static int dvb_init(struct saa7134_dev *dev) } break; case SAA7134_BOARD_AVERMEDIA_A16D: - dprintk("avertv A16D dvb setup\n"); - dev->dvb.frontend = dvb_attach(mt352_attach, &avermedia_16d, - &dev->i2c_adap); + dprintk("AverMedia A16D dvb setup\n"); + dev->dvb.frontend = dvb_attach(mt352_attach, + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); attach_xc3028 = 1; break; case SAA7134_BOARD_MD7134: @@ -1261,11 +1255,14 @@ static int dvb_init(struct saa7134_dev *dev) goto dettach_frontend; break; case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: + dprintk("AverMedia E506R dvb setup\n"); + saa7134_set_gpio(dev, 25, 0); + msleep(10); + saa7134_set_gpio(dev, 25, 1); dev->dvb.frontend = dvb_attach(mt352_attach, - &avermedia_e506r_mt352_dev, - &dev->i2c_adap); + &avermedia_xc3028_mt352_dev, + &dev->i2c_adap); attach_xc3028 = 1; - break; case SAA7134_BOARD_MD7134_BRIDGE_2: dev->dvb.frontend = dvb_attach(tda10086_attach, &sd1878_4m, &dev->i2c_adap); diff --git a/drivers/media/video/saa7134/saa7134-input.c b/drivers/media/video/saa7134/saa7134-input.c index 919632b..76e6501 100644 --- a/drivers/media/video/saa7134/saa7134-input.c +++ b/drivers/media/video/saa7134/saa7134-input.c @@ -323,6 +323,15 @@ int saa7134_input_init1(struct saa7134_dev *dev) saa_setb(SAA7134_GPIO_GPMODE1, 0x1); saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); break; + case SAA7134_BOARD_AVERMEDIA_A16D: + ir_codes = ir_codes_avermedia_a16d; + mask_keycode = 0x02F200; + mask_keydown = 0x000400; + polling = 50; /* ms */ + /* Without this we won't receive key up events */ + saa_setb(SAA7134_GPIO_GPMODE1, 0x1); + saa_setb(SAA7134_GPIO_GPSTATUS1, 0x1); + break; case SAA7134_BOARD_KWORLD_TERMINATOR: ir_codes = ir_codes_pixelview; mask_keycode = 0x00001f; diff --git a/include/media/ir-common.h b/include/media/ir-common.h index bfee8be..b8e8aa9 100644 --- a/include/media/ir-common.h +++ b/include/media/ir-common.h @@ -146,6 +146,7 @@ extern IR_KEYTAB_TYPE ir_codes_behold_columbus[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_pinnacle_pctv_hd[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_genius_tvgo_a11mce[IR_KEYTAB_SIZE]; extern IR_KEYTAB_TYPE ir_codes_powercolor_real_angel[IR_KEYTAB_SIZE]; +extern IR_KEYTAB_TYPE ir_codes_avermedia_a16d[IR_KEYTAB_SIZE]; #endif -- cgit v0.10.2 From beb31e636501f39e853ac5d0ffd3fbb910d19d5c Mon Sep 17 00:00:00 2001 From: Michael Krufky Date: Tue, 17 Jun 2008 17:37:51 -0300 Subject: V4L/DVB (8061): cx18: only select tuner / frontend modules if !DVB_FE_CUSTOMISE The automatic Kconfig selection for tuners and frontends should be conditional, based on !DVB_FE_CUSTOMISE. This patch corrects the selection for VIDEO_CX18 on MEDIA_TUNER_MXL5005S and DVB_S5H1409 Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/Kconfig b/drivers/media/video/cx18/Kconfig index 5f94269..9aefdc5 100644 --- a/drivers/media/video/cx18/Kconfig +++ b/drivers/media/video/cx18/Kconfig @@ -10,8 +10,8 @@ config VIDEO_CX18 select VIDEO_TVEEPROM select VIDEO_CX2341X select VIDEO_CS5345 - select DVB_S5H1409 - select MEDIA_TUNER_MXL5005S + select DVB_S5H1409 if !DVB_FE_CUSTOMISE + select MEDIA_TUNER_MXL5005S if !DVB_FE_CUSTOMISE ---help--- This is a video4linux driver for Conexant cx23418 based PCI combo video recorder devices. -- cgit v0.10.2 From 527629fb7c35ad93389ab132823d19139dd88e70 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sat, 14 Jun 2008 03:58:08 -0300 Subject: V4L/DVB (8063): cx18: Fix unintended auto configurations in cx18-av-core Change the cx18-av-core code so that accesses to cx23418 av core that cause auto-configuration will be adjusted to emulate the auto-configuration behavior of the cx25843. This fixes the VBI displayed as video at the top of the frame for NTSC and probably other things. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-av-core.c b/drivers/media/video/cx18/cx18-av-core.c index 8f2959a..faca43e 100644 --- a/drivers/media/video/cx18/cx18-av-core.c +++ b/drivers/media/video/cx18/cx18-av-core.c @@ -69,6 +69,58 @@ int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask, or_value); } +int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, int no_acfg_mask) +{ + int retval; + u32 saved_reg[8] = {0}; + + if (no_acfg_mask & CXADEC_NO_ACFG_AFE) { + saved_reg[0] = cx18_av_read4(cx, CXADEC_CHIP_CTRL); + saved_reg[1] = cx18_av_read4(cx, CXADEC_AFE_CTRL); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_PLL) { + saved_reg[2] = cx18_av_read4(cx, CXADEC_PLL_CTRL1); + saved_reg[3] = cx18_av_read4(cx, CXADEC_VID_PLL_FRAC); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_VID) { + saved_reg[4] = cx18_av_read4(cx, CXADEC_HORIZ_TIM_CTRL); + saved_reg[5] = cx18_av_read4(cx, CXADEC_VERT_TIM_CTRL); + saved_reg[6] = cx18_av_read4(cx, CXADEC_SRC_COMB_CFG); + saved_reg[7] = cx18_av_read4(cx, CXADEC_CHROMA_VBIOFF_CFG); + } + + retval = cx18_av_write(cx, addr, value); + + if (no_acfg_mask & CXADEC_NO_ACFG_AFE) { + cx18_av_write4(cx, CXADEC_CHIP_CTRL, saved_reg[0]); + cx18_av_write4(cx, CXADEC_AFE_CTRL, saved_reg[1]); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_PLL) { + cx18_av_write4(cx, CXADEC_PLL_CTRL1, saved_reg[2]); + cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, saved_reg[3]); + } + + if (no_acfg_mask & CXADEC_NO_ACFG_VID) { + cx18_av_write4(cx, CXADEC_HORIZ_TIM_CTRL, saved_reg[4]); + cx18_av_write4(cx, CXADEC_VERT_TIM_CTRL, saved_reg[5]); + cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, saved_reg[6]); + cx18_av_write4(cx, CXADEC_CHROMA_VBIOFF_CFG, saved_reg[7]); + } + + return retval; +} + +int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned and_mask, + u8 or_value, int no_acfg_mask) +{ + return cx18_av_write_no_acfg(cx, addr, + (cx18_av_read(cx, addr) & and_mask) | + or_value, no_acfg_mask); +} + /* ----------------------------------------------------------------------- */ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, @@ -170,13 +222,15 @@ static void input_change(struct cx18 *cx) /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */ if (std & V4L2_STD_SECAM) - cx18_av_write(cx, 0x402, 0); + cx18_av_write_no_acfg(cx, 0x402, 0, CXADEC_NO_ACFG_ALL); else { - cx18_av_write(cx, 0x402, 0x04); + cx18_av_write_no_acfg(cx, 0x402, 0x04, CXADEC_NO_ACFG_ALL); cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); } - cx18_av_and_or(cx, 0x401, ~0x60, 0); - cx18_av_and_or(cx, 0x401, ~0x60, 0x60); + cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); + cx18_av_and_or_no_acfg(cx, 0x401, ~0x60, 0x60, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); if (std & V4L2_STD_525_60) { if (std == V4L2_STD_NTSC_M_JP) { @@ -262,7 +316,8 @@ static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, cx18_av_write(cx, 0x103, reg); /* Set INPUT_MODE to Composite (0) or S-Video (1) */ - cx18_av_and_or(cx, 0x401, ~0x6, is_composite ? 0 : 0x02); + cx18_av_and_or_no_acfg(cx, 0x401, ~0x6, is_composite ? 0 : 0x02, + CXADEC_NO_ACFG_PLL | CXADEC_NO_ACFG_VID); /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ cx18_av_and_or(cx, 0x102, ~0x2, (reg & 0x80) == 0 ? 2 : 0); /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ @@ -318,12 +373,12 @@ static int set_v4lstd(struct cx18 *cx) This happens for example with the Yuan MPC622. */ if (fmt >= 4 && fmt < 8) { /* Set format to NTSC-M */ - cx18_av_and_or(cx, 0x400, ~0xf, 1); + cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, 1, CXADEC_NO_ACFG_AFE); /* Turn off LCOMB */ cx18_av_and_or(cx, 0x47b, ~6, 0); } - cx18_av_and_or(cx, 0x400, ~0xf, fmt); - cx18_av_and_or(cx, 0x403, ~0x3, pal_m); + cx18_av_and_or_no_acfg(cx, 0x400, ~0xf, fmt, CXADEC_NO_ACFG_AFE); + cx18_av_and_or_no_acfg(cx, 0x403, ~0x3, pal_m, CXADEC_NO_ACFG_ALL); cx18_av_vbi_setup(cx); input_change(cx); return 0; diff --git a/drivers/media/video/cx18/cx18-av-core.h b/drivers/media/video/cx18/cx18-av-core.h index 39f3c93..c172823 100644 --- a/drivers/media/video/cx18/cx18-av-core.h +++ b/drivers/media/video/cx18/cx18-av-core.h @@ -295,14 +295,24 @@ struct cx18_av_state { #define CXADEC_SELECT_AUDIO_STANDARD_FM 0xF9 /* FM radio */ #define CXADEC_SELECT_AUDIO_STANDARD_AUTO 0xFF /* Auto detect */ +/* Flags on what to preserve on write to 0x400-0x403 with cx18_av_.*_no_acfg()*/ +#define CXADEC_NO_ACFG_AFE 0x01 /* Preserve 0x100-0x107 */ +#define CXADEC_NO_ACFG_PLL 0x02 /* Preserve 0x108-0x10f */ +#define CXADEC_NO_ACFG_VID 0x04 /* Preserve 0x470-0x47f */ +#define CXADEC_NO_ACFG_ALL 0x07 + /* ----------------------------------------------------------------------- */ /* cx18_av-core.c */ int cx18_av_write(struct cx18 *cx, u16 addr, u8 value); int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value); +int cx18_av_write_no_acfg(struct cx18 *cx, u16 addr, u8 value, + int no_acfg_mask); u8 cx18_av_read(struct cx18 *cx, u16 addr); u32 cx18_av_read4(struct cx18 *cx, u16 addr); int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned mask, u8 value); int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 mask, u32 value); +int cx18_av_and_or_no_acfg(struct cx18 *cx, u16 addr, unsigned mask, u8 value, + int no_acfg_mask); int cx18_av_cmd(struct cx18 *cx, unsigned int cmd, void *arg); /* ----------------------------------------------------------------------- */ -- cgit v0.10.2 From 46195b555aa3edd265b4e765e4edff59b253b55e Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Thu, 19 Jun 2008 23:17:05 -0300 Subject: V4L/DVB (8066): cx18: Fix audio mux input definitions for HVR-1600 Line In 2 and FM radio Fix the cx18-cards.c structures for the HVR-1600 to reflect that audio Line In 2 and FM radio audio go to AIN3 and AIN4 of the CS5345 mux respectively. Verified by physical inspection of an HVR-1600MCE, by listening to FM broadcasts with the HVR-1600MCE, and by comparing with the card definition for a PVR-150 in ivtv. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c35eb53..c18865b 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -67,10 +67,10 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, .ddr = { /* ESMT M13S128324A-5B memory */ .chip_config = 0x003, @@ -107,10 +107,10 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, { CX18_CARD_INPUT_LINE_IN2, - CX18_AV_AUDIO_SERIAL, CS5345_IN_2 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_3 }, }, .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, 0 }, + CX18_AV_AUDIO_SERIAL, CS5345_IN_4 }, .ddr = { /* Samsung K4D263238G-VC33 memory */ .chip_config = 0x003, -- cgit v0.10.2 From 08cf7b2ed172cc83f3d2f44b712b3d54e6cc4ae6 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 22 Jun 2008 00:04:21 -0300 Subject: V4L/DVB (8067): cx18: Fix firmware load for case when digital capture happens first This is a fix for the case when a digital capture from dvr0 happens first after modprobe, before access to any cx18 v4l2 device nodes. The initial dvb feed start has been changed to load the firmware if not already loaded. Also fixed a use counter to correct dvb feed accounting if starting the transport DMA fails. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-dvb.c b/drivers/media/video/cx18/cx18-dvb.c index c974417..cae3898 100644 --- a/drivers/media/video/cx18/cx18-dvb.c +++ b/drivers/media/video/cx18/cx18-dvb.c @@ -69,11 +69,21 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) struct dvb_demux *demux = feed->demux; struct cx18_stream *stream = (struct cx18_stream *) demux->priv; struct cx18 *cx = stream->cx; - int ret = -EINVAL; + int ret; u32 v; CX18_DEBUG_INFO("Start feed: pid = 0x%x index = %d\n", feed->pid, feed->index); + + mutex_lock(&cx->serialize_lock); + ret = cx18_init_on_first_open(cx); + mutex_unlock(&cx->serialize_lock); + if (ret) { + CX18_ERR("Failed to initialize firmware starting DVB feed\n"); + return ret; + } + ret = -EINVAL; + switch (cx->card->type) { case CX18_CARD_HVR_1600_ESMT: case CX18_CARD_HVR_1600_SAMSUNG: @@ -101,6 +111,11 @@ static int cx18_dvb_start_feed(struct dvb_demux_feed *feed) if (stream->dvb.feeding++ == 0) { CX18_DEBUG_INFO("Starting Transport DMA\n"); ret = cx18_start_v4l2_encode_stream(stream); + if (ret < 0) { + CX18_DEBUG_INFO( + "Failed to start Transport DMA\n"); + stream->dvb.feeding--; + } } else ret = 0; mutex_unlock(&stream->dvb.feedlock); -- cgit v0.10.2 From 1f09e8a25c9aaa4066b4593c1bf99a4cbcc38120 Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 22 Jun 2008 01:27:00 -0300 Subject: V4L/DVB (8068): cx18: Add I2C slave reset via GPIO upon initialization cx18: Add I2C slave reset via GPIO upon initialization. One user, Michael , has reported this allows his HVR-1600 EEPROM to be consistently recognized when using (long,) 100 msec delays. The delays in this commit are nominal (10 & 40 msec) and need testing/tuning on boards with I2C problems to find the right values. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index c18865b..bbf23fa4 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -82,6 +82,11 @@ static const struct cx18_card cx18_card_hvr1600_esmt = { }, .gpio_init.initial_value = 0x3001, .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + }, .i2c = &cx18_i2c_std, }; @@ -122,6 +127,11 @@ static const struct cx18_card cx18_card_hvr1600_samsung = { }, .gpio_init.initial_value = 0x3001, .gpio_init.direction = 0x3001, + .gpio_i2c_slave_reset = { + .active_lo_mask = 0x3001, + .msecs_asserted = 10, + .msecs_recovery = 40, + }, .i2c = &cx18_i2c_std, }; diff --git a/drivers/media/video/cx18/cx18-cards.h b/drivers/media/video/cx18/cx18-cards.h index 3c2c0b9..dc2dd94 100644 --- a/drivers/media/video/cx18/cx18-cards.h +++ b/drivers/media/video/cx18/cx18-cards.h @@ -78,6 +78,13 @@ struct cx18_gpio_init { /* set initial GPIO DIR and OUT values */ u32 initial_value; }; +struct cx18_gpio_i2c_slave_reset { + u32 active_lo_mask; /* GPIO outputs that reset i2c chips when low */ + u32 active_hi_mask; /* GPIO outputs that reset i2c chips when high */ + int msecs_asserted; /* time period reset must remain asserted */ + int msecs_recovery; /* time after deassert for chips to be ready */ +}; + struct cx18_card_tuner { v4l2_std_id std; /* standard for which the tuner is suitable */ int tuner; /* tuner ID (from tuner.h) */ @@ -114,7 +121,8 @@ struct cx18_card { /* GPIO card-specific settings */ u8 xceive_pin; /* XCeive tuner GPIO reset pin */ - struct cx18_gpio_init gpio_init; + struct cx18_gpio_init gpio_init; + struct cx18_gpio_i2c_slave_reset gpio_i2c_slave_reset; struct cx18_card_tuner tuners[CX18_CARD_MAX_TUNERS]; struct cx18_card_tuner_i2c *i2c; diff --git a/drivers/media/video/cx18/cx18-gpio.c b/drivers/media/video/cx18/cx18-gpio.c index ceb6365..b302833 100644 --- a/drivers/media/video/cx18/cx18-gpio.c +++ b/drivers/media/video/cx18/cx18-gpio.c @@ -53,10 +53,34 @@ static void gpio_write(struct cx18 *cx) write_reg(((dir & 0xffff) << 16) | (val & 0xffff), CX18_REG_GPIO_OUT1); write_reg(dir & 0xffff0000, CX18_REG_GPIO_DIR2); - write_reg((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), + write_reg_sync((dir & 0xffff0000) | ((val & 0xffff0000) >> 16), CX18_REG_GPIO_OUT2); } +void cx18_reset_i2c_slaves_gpio(struct cx18 *cx) +{ + const struct cx18_gpio_i2c_slave_reset *p; + + p = &cx->card->gpio_i2c_slave_reset; + + if ((p->active_lo_mask | p->active_hi_mask) == 0) + return; + + /* Assuming that the masks are a subset of the bits in gpio_dir */ + + /* Assert */ + cx->gpio_val = + (cx->gpio_val | p->active_hi_mask) & ~(p->active_lo_mask); + gpio_write(cx); + schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_asserted)); + + /* Deassert */ + cx->gpio_val = + (cx->gpio_val | p->active_lo_mask) & ~(p->active_hi_mask); + gpio_write(cx); + schedule_timeout_uninterruptible(msecs_to_jiffies(p->msecs_recovery)); +} + void cx18_gpio_init(struct cx18 *cx) { cx->gpio_dir = cx->card->gpio_init.direction; diff --git a/drivers/media/video/cx18/cx18-gpio.h b/drivers/media/video/cx18/cx18-gpio.h index 41bac88..525c328 100644 --- a/drivers/media/video/cx18/cx18-gpio.h +++ b/drivers/media/video/cx18/cx18-gpio.h @@ -21,4 +21,5 @@ */ void cx18_gpio_init(struct cx18 *cx); +void cx18_reset_i2c_slaves_gpio(struct cx18 *cx); int cx18_reset_tuner_gpio(void *dev, int cmd, int value); diff --git a/drivers/media/video/cx18/cx18-i2c.c b/drivers/media/video/cx18/cx18-i2c.c index 1d6c51a..680bc4e 100644 --- a/drivers/media/video/cx18/cx18-i2c.c +++ b/drivers/media/video/cx18/cx18-i2c.c @@ -405,6 +405,8 @@ int init_cx18_i2c(struct cx18 *cx) cx18_setscl(&cx->i2c_algo_cb_data[1], 1); cx18_setsda(&cx->i2c_algo_cb_data[1], 1); + cx18_reset_i2c_slaves_gpio(cx); + return i2c_bit_add_bus(&cx->i2c_adap[0]) || i2c_bit_add_bus(&cx->i2c_adap[1]); } -- cgit v0.10.2 From ad907fa39517ca35b46912fbfe2b77cd89e1d56a Mon Sep 17 00:00:00 2001 From: Andy Walls Date: Sun, 22 Jun 2008 02:00:09 -0300 Subject: V4L/DVB (8069): cx18: Fix S-Video and Compsite inputs for the Yuan MPC718 and enable card entry cx18: Fix S-Video and Compsite input settings for the Yuan MPC718 per user reports from Yuri Warczynski and Brian Hope and enable the card entry. The tuner reset GPIO pin is likely incorrect as the tuner firmware cannot be reloaded without a reboot. It is likely the audio routing is done via GPIO which is not implemented yet, as users report audio doesn't work for some inputs. Signed-off-by: Andy Walls Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/cx18/cx18-cards.c b/drivers/media/video/cx18/cx18-cards.c index bbf23fa4..c26e0ef 100644 --- a/drivers/media/video/cx18/cx18-cards.c +++ b/drivers/media/video/cx18/cx18-cards.c @@ -194,23 +194,26 @@ static const struct cx18_card_pci_info cx18_pci_mpc718[] = { static const struct cx18_card cx18_card_mpc718 = { .type = CX18_CARD_YUAN_MPC718, .name = "Yuan MPC718", - .comment = "Not yet supported!\n", - .v4l2_capabilities = 0, + .comment = "Some Composite and S-Video inputs are currently working.\n", + .v4l2_capabilities = CX18_CAP_ENCODER, .hw_audio_ctrl = CX18_HW_CX23418, .hw_all = CX18_HW_TUNER, .video_inputs = { - { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE7 }, - { CX18_CARD_INPUT_SVIDEO1, 1, CX18_AV_SVIDEO1 }, - { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE3 }, + { CX18_CARD_INPUT_VID_TUNER, 0, CX18_AV_COMPOSITE2 }, + { CX18_CARD_INPUT_SVIDEO1, 1, + CX18_AV_SVIDEO_LUMA3 | CX18_AV_SVIDEO_CHROMA4 }, + { CX18_CARD_INPUT_COMPOSITE1, 1, CX18_AV_COMPOSITE1 }, + { CX18_CARD_INPUT_SVIDEO2, 2, + CX18_AV_SVIDEO_LUMA7 | CX18_AV_SVIDEO_CHROMA8 }, + { CX18_CARD_INPUT_COMPOSITE2, 2, CX18_AV_COMPOSITE6 }, + { CX18_CARD_INPUT_COMPOSITE3, 2, CX18_AV_COMPOSITE3 }, }, .audio_inputs = { - { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO8, 0 }, - { CX18_CARD_INPUT_LINE_IN1, - CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO5, 0 }, + { CX18_CARD_INPUT_LINE_IN1, CX18_AV_AUDIO_SERIAL, 0 }, + { CX18_CARD_INPUT_LINE_IN2, CX18_AV_AUDIO_SERIAL, 0 }, }, - .radio_input = { CX18_CARD_INPUT_AUD_TUNER, - CX18_AV_AUDIO_SERIAL, 0 }, + .radio_input = { CX18_CARD_INPUT_AUD_TUNER, CX18_AV_AUDIO_SERIAL, 0 }, .tuners = { /* XC3028 tuner */ { .std = V4L2_STD_ALL, .tuner = TUNER_XC2028 }, -- cgit v0.10.2 From c9fa2b1eee9d10c2455d3cd148cf13b34d91bdef Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 22:45:55 -0300 Subject: V4L/DVB (8071): tda10023: Fix possible kernel oops during initialisation If the i2c write fails during initialisation, an oops happens because state->frontend.dvb is still undefined. Fixed. Thanks to Sigmund Augdal for reporting this bug, and to Hartmut Birr for suggesting the fix. Thanks-to: Sigmund Augdal Thanks-to: Hartmut Birr Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/tda10023.c b/drivers/media/dvb/frontends/tda10023.c index 0727b80..c6ff5b8 100644 --- a/drivers/media/dvb/frontends/tda10023.c +++ b/drivers/media/dvb/frontends/tda10023.c @@ -116,9 +116,12 @@ static u8 tda10023_readreg (struct tda10023_state* state, u8 reg) int ret; ret = i2c_transfer (state->i2c, msg, 2); - if (ret != 2) - printk("DVB: TDA10023: %s: readreg error (ret == %i)\n", - __func__, ret); + if (ret != 2) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error " + "(reg == 0x%02x, ret == %i)\n", + num, __func__, reg, ret); + } return b1[0]; } @@ -129,11 +132,12 @@ static int tda10023_writereg (struct tda10023_state* state, u8 reg, u8 data) int ret; ret = i2c_transfer (state->i2c, &msg, 1); - if (ret != 1) - printk("DVB: TDA10023(%d): %s, writereg error " + if (ret != 1) { + int num = state->frontend.dvb ? state->frontend.dvb->num : -1; + printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error " "(reg == 0x%02x, val == 0x%02x, ret == %i)\n", - state->frontend.dvb->num, __func__, reg, data, ret); - + num, __func__, reg, data, ret); + } return (ret != 1) ? -EREMOTEIO : 0; } @@ -464,7 +468,7 @@ struct dvb_frontend* tda10023_attach(const struct tda1002x_config* config, int i; /* allocate memory for the internal state */ - state = kmalloc(sizeof(struct tda10023_state), GFP_KERNEL); + state = kzalloc(sizeof(struct tda10023_state), GFP_KERNEL); if (state == NULL) goto error; /* setup the state */ -- cgit v0.10.2 From edabaffc7e7fccdeadac6273704102adc2b604ae Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 23:04:27 -0300 Subject: V4L/DVB (8073): av7110: Catch another type of ARM crash Catch another type of ARM crash. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index 9d81074..c99936c 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -427,6 +427,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) if (err) { printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n", __func__, type); + av7110->arm_errors++; return -ETIMEDOUT; } msleep(1); -- cgit v0.10.2 From 0b915e74ac10b65da930aa430837d4338f5deb65 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 23:10:14 -0300 Subject: V4L/DVB (8074): av7110: OSD transfers should not be interrupted OSD transfers should not be interrupted. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index c99936c..3a3f527 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -854,10 +854,8 @@ static osd_raw_window_t bpp2bit[8] = { static inline int WaitUntilBmpLoaded(struct av7110 *av7110) { - int ret = wait_event_interruptible_timeout(av7110->bmpq, + int ret = wait_event_timeout(av7110->bmpq, av7110->bmp_state != BMP_LOADING, 10*HZ); - if (ret == -ERESTARTSYS) - return ret; if (ret == 0) { printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n", ret, av7110->bmp_state); -- cgit v0.10.2 From 7876ad75b1a3b7dc3d5d765d0be086d89fd2e663 Mon Sep 17 00:00:00 2001 From: Oliver Endriss Date: Thu, 19 Jun 2008 23:25:04 -0300 Subject: V4L/DVB (8075): stv0299: Uncorrected block count and bit error rate fixed Fix uncorrected block counter and bit error rate to follow DVB API spec: - Unsupported controls return -ENOSYS. - UNC must never be set to 0. Signed-off-by: Oliver Endriss Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/stv0299.c b/drivers/media/dvb/frontends/stv0299.c index 1755618..35435be 100644 --- a/drivers/media/dvb/frontends/stv0299.c +++ b/drivers/media/dvb/frontends/stv0299.c @@ -63,6 +63,7 @@ struct stv0299_state { u32 symbol_rate; fe_code_rate_t fec_inner; int errmode; + u32 ucblocks; }; #define STATUS_BER 0 @@ -501,8 +502,10 @@ static int stv0299_read_ber(struct dvb_frontend* fe, u32* ber) { struct stv0299_state* state = fe->demodulator_priv; - if (state->errmode != STATUS_BER) return 0; - *ber = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); + if (state->errmode != STATUS_BER) + return -ENOSYS; + + *ber = stv0299_readreg(state, 0x1e) | (stv0299_readreg(state, 0x1d) << 8); return 0; } @@ -540,8 +543,12 @@ static int stv0299_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) { struct stv0299_state* state = fe->demodulator_priv; - if (state->errmode != STATUS_UCBLOCKS) *ucblocks = 0; - else *ucblocks = (stv0299_readreg (state, 0x1d) << 8) | stv0299_readreg (state, 0x1e); + if (state->errmode != STATUS_UCBLOCKS) + return -ENOSYS; + + state->ucblocks += stv0299_readreg(state, 0x1e); + state->ucblocks += (stv0299_readreg(state, 0x1d) << 8); + *ucblocks = state->ucblocks; return 0; } -- cgit v0.10.2 From 7fa8e6fa1519194fc0c931f40d530fb55137bad9 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Sat, 21 Jun 2008 13:23:27 -0300 Subject: V4L/DVB (8092): videodev: simplify and fix standard enumeration VIDIOC_ENUMSTD did not return all the PAL/SECAM/NTSC variants: it just returned one single PAL/SECAM/NTSC standard without separate entries for the trickier standards like NTSC-JP. Changed the code so that it behaves better. Also simplified the if/switch statements into a common standards lookup table. Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/videodev.c b/drivers/media/video/videodev.c index 31e8af0..67a661c 100644 --- a/drivers/media/video/videodev.c +++ b/drivers/media/video/videodev.c @@ -51,12 +51,51 @@ #define VIDEO_NUM_DEVICES 256 #define VIDEO_NAME "video4linux" +struct std_descr { + v4l2_std_id std; + const char *descr; +}; + +static const struct std_descr standards[] = { + { V4L2_STD_NTSC, "NTSC" }, + { V4L2_STD_NTSC_M, "NTSC-M" }, + { V4L2_STD_NTSC_M_JP, "NTSC-M-JP" }, + { V4L2_STD_NTSC_M_KR, "NTSC-M-KR" }, + { V4L2_STD_NTSC_443, "NTSC-443" }, + { V4L2_STD_PAL, "PAL" }, + { V4L2_STD_PAL_BG, "PAL-BG" }, + { V4L2_STD_PAL_B, "PAL-B" }, + { V4L2_STD_PAL_B1, "PAL-B1" }, + { V4L2_STD_PAL_G, "PAL-G" }, + { V4L2_STD_PAL_H, "PAL-H" }, + { V4L2_STD_PAL_I, "PAL-I" }, + { V4L2_STD_PAL_DK, "PAL-DK" }, + { V4L2_STD_PAL_D, "PAL-D" }, + { V4L2_STD_PAL_D1, "PAL-D1" }, + { V4L2_STD_PAL_K, "PAL-K" }, + { V4L2_STD_PAL_M, "PAL-M" }, + { V4L2_STD_PAL_N, "PAL-N" }, + { V4L2_STD_PAL_Nc, "PAL-Nc" }, + { V4L2_STD_PAL_60, "PAL-60" }, + { V4L2_STD_SECAM, "SECAM" }, + { V4L2_STD_SECAM_B, "SECAM-B" }, + { V4L2_STD_SECAM_G, "SECAM-G" }, + { V4L2_STD_SECAM_H, "SECAM-H" }, + { V4L2_STD_SECAM_DK, "SECAM-DK" }, + { V4L2_STD_SECAM_D, "SECAM-D" }, + { V4L2_STD_SECAM_K, "SECAM-K" }, + { V4L2_STD_SECAM_K1, "SECAM-K1" }, + { V4L2_STD_SECAM_L, "SECAM-L" }, + { V4L2_STD_SECAM_LC, "SECAM-Lc" }, + { 0, "Unknown" } +}; + /* video4linux standard ID conversion to standard name */ -char *v4l2_norm_to_name(v4l2_std_id id) +const char *v4l2_norm_to_name(v4l2_std_id id) { - char *name; u32 myid = id; + int i; /* HACK: ppc32 architecture doesn't have __ucmpdi2 function to handle 64 bit comparations. So, on that architecture, with some gcc @@ -64,110 +103,17 @@ char *v4l2_norm_to_name(v4l2_std_id id) */ BUG_ON(myid != id); - switch (myid) { - case V4L2_STD_PAL: - name = "PAL"; - break; - case V4L2_STD_PAL_BG: - name = "PAL-BG"; - break; - case V4L2_STD_PAL_DK: - name = "PAL-DK"; - break; - case V4L2_STD_PAL_B: - name = "PAL-B"; - break; - case V4L2_STD_PAL_B1: - name = "PAL-B1"; - break; - case V4L2_STD_PAL_G: - name = "PAL-G"; - break; - case V4L2_STD_PAL_H: - name = "PAL-H"; - break; - case V4L2_STD_PAL_I: - name = "PAL-I"; - break; - case V4L2_STD_PAL_D: - name = "PAL-D"; - break; - case V4L2_STD_PAL_D1: - name = "PAL-D1"; - break; - case V4L2_STD_PAL_K: - name = "PAL-K"; - break; - case V4L2_STD_PAL_M: - name = "PAL-M"; - break; - case V4L2_STD_PAL_N: - name = "PAL-N"; - break; - case V4L2_STD_PAL_Nc: - name = "PAL-Nc"; - break; - case V4L2_STD_PAL_60: - name = "PAL-60"; - break; - case V4L2_STD_NTSC: - name = "NTSC"; - break; - case V4L2_STD_NTSC_M: - name = "NTSC-M"; - break; - case V4L2_STD_NTSC_M_JP: - name = "NTSC-M-JP"; - break; - case V4L2_STD_NTSC_443: - name = "NTSC-443"; - break; - case V4L2_STD_NTSC_M_KR: - name = "NTSC-M-KR"; - break; - case V4L2_STD_SECAM: - name = "SECAM"; - break; - case V4L2_STD_SECAM_DK: - name = "SECAM-DK"; - break; - case V4L2_STD_SECAM_B: - name = "SECAM-B"; - break; - case V4L2_STD_SECAM_D: - name = "SECAM-D"; - break; - case V4L2_STD_SECAM_G: - name = "SECAM-G"; - break; - case V4L2_STD_SECAM_H: - name = "SECAM-H"; - break; - case V4L2_STD_SECAM_K: - name = "SECAM-K"; - break; - case V4L2_STD_SECAM_K1: - name = "SECAM-K1"; - break; - case V4L2_STD_SECAM_L: - name = "SECAM-L"; - break; - case V4L2_STD_SECAM_LC: - name = "SECAM-LC"; - break; - default: - name = "Unknown"; - break; - } - - return name; + for (i = 0; standards[i].std; i++) + if (myid == standards[i].std) + break; + return standards[i].descr; } EXPORT_SYMBOL(v4l2_norm_to_name); /* Fill in the fields of a v4l2_standard structure according to the 'id' and 'transmission' parameters. Returns negative on error. */ int v4l2_video_std_construct(struct v4l2_standard *vs, - int id, char *name) + int id, const char *name) { u32 index = vs->index; @@ -1218,95 +1164,40 @@ static int __video_do_ioctl(struct inode *inode, struct file *file, case VIDIOC_ENUMSTD: { struct v4l2_standard *p = arg; - v4l2_std_id id = vfd->tvnorms,curr_id=0; - unsigned int index = p->index,i; - - if (index<0) { - ret=-EINVAL; - break; - } - - /* Return norm array on a canonical way */ - for (i=0;i<= index && id; i++) { - if ( (id & V4L2_STD_PAL) == V4L2_STD_PAL) { - curr_id = V4L2_STD_PAL; - } else if ( (id & V4L2_STD_PAL_BG) == V4L2_STD_PAL_BG) { - curr_id = V4L2_STD_PAL_BG; - } else if ( (id & V4L2_STD_PAL_DK) == V4L2_STD_PAL_DK) { - curr_id = V4L2_STD_PAL_DK; - } else if ( (id & V4L2_STD_PAL_B) == V4L2_STD_PAL_B) { - curr_id = V4L2_STD_PAL_B; - } else if ( (id & V4L2_STD_PAL_B1) == V4L2_STD_PAL_B1) { - curr_id = V4L2_STD_PAL_B1; - } else if ( (id & V4L2_STD_PAL_G) == V4L2_STD_PAL_G) { - curr_id = V4L2_STD_PAL_G; - } else if ( (id & V4L2_STD_PAL_H) == V4L2_STD_PAL_H) { - curr_id = V4L2_STD_PAL_H; - } else if ( (id & V4L2_STD_PAL_I) == V4L2_STD_PAL_I) { - curr_id = V4L2_STD_PAL_I; - } else if ( (id & V4L2_STD_PAL_D) == V4L2_STD_PAL_D) { - curr_id = V4L2_STD_PAL_D; - } else if ( (id & V4L2_STD_PAL_D1) == V4L2_STD_PAL_D1) { - curr_id = V4L2_STD_PAL_D1; - } else if ( (id & V4L2_STD_PAL_K) == V4L2_STD_PAL_K) { - curr_id = V4L2_STD_PAL_K; - } else if ( (id & V4L2_STD_PAL_M) == V4L2_STD_PAL_M) { - curr_id = V4L2_STD_PAL_M; - } else if ( (id & V4L2_STD_PAL_N) == V4L2_STD_PAL_N) { - curr_id = V4L2_STD_PAL_N; - } else if ( (id & V4L2_STD_PAL_Nc) == V4L2_STD_PAL_Nc) { - curr_id = V4L2_STD_PAL_Nc; - } else if ( (id & V4L2_STD_PAL_60) == V4L2_STD_PAL_60) { - curr_id = V4L2_STD_PAL_60; - } else if ( (id & V4L2_STD_NTSC) == V4L2_STD_NTSC) { - curr_id = V4L2_STD_NTSC; - } else if ( (id & V4L2_STD_NTSC_M) == V4L2_STD_NTSC_M) { - curr_id = V4L2_STD_NTSC_M; - } else if ( (id & V4L2_STD_NTSC_M_JP) == V4L2_STD_NTSC_M_JP) { - curr_id = V4L2_STD_NTSC_M_JP; - } else if ( (id & V4L2_STD_NTSC_443) == V4L2_STD_NTSC_443) { - curr_id = V4L2_STD_NTSC_443; - } else if ( (id & V4L2_STD_NTSC_M_KR) == V4L2_STD_NTSC_M_KR) { - curr_id = V4L2_STD_NTSC_M_KR; - } else if ( (id & V4L2_STD_SECAM) == V4L2_STD_SECAM) { - curr_id = V4L2_STD_SECAM; - } else if ( (id & V4L2_STD_SECAM_DK) == V4L2_STD_SECAM_DK) { - curr_id = V4L2_STD_SECAM_DK; - } else if ( (id & V4L2_STD_SECAM_B) == V4L2_STD_SECAM_B) { - curr_id = V4L2_STD_SECAM_B; - } else if ( (id & V4L2_STD_SECAM_D) == V4L2_STD_SECAM_D) { - curr_id = V4L2_STD_SECAM_D; - } else if ( (id & V4L2_STD_SECAM_G) == V4L2_STD_SECAM_G) { - curr_id = V4L2_STD_SECAM_G; - } else if ( (id & V4L2_STD_SECAM_H) == V4L2_STD_SECAM_H) { - curr_id = V4L2_STD_SECAM_H; - } else if ( (id & V4L2_STD_SECAM_K) == V4L2_STD_SECAM_K) { - curr_id = V4L2_STD_SECAM_K; - } else if ( (id & V4L2_STD_SECAM_K1) == V4L2_STD_SECAM_K1) { - curr_id = V4L2_STD_SECAM_K1; - } else if ( (id & V4L2_STD_SECAM_L) == V4L2_STD_SECAM_L) { - curr_id = V4L2_STD_SECAM_L; - } else if ( (id & V4L2_STD_SECAM_LC) == V4L2_STD_SECAM_LC) { - curr_id = V4L2_STD_SECAM_LC; - } else { + v4l2_std_id id = vfd->tvnorms, curr_id = 0; + unsigned int index = p->index, i, j = 0; + const char *descr = ""; + + /* Return norm array in a canonical way */ + for (i = 0; i <= index && id; i++) { + /* last std value in the standards array is 0, so this + while always ends there since (id & 0) == 0. */ + while ((id & standards[j].std) != standards[j].std) + j++; + curr_id = standards[j].std; + descr = standards[j].descr; + j++; + if (curr_id == 0) break; - } - id &= ~curr_id; + if (curr_id != V4L2_STD_PAL && + curr_id != V4L2_STD_SECAM && + curr_id != V4L2_STD_NTSC) + id &= ~curr_id; } - if (i<=index) + if (i <= index) return -EINVAL; - v4l2_video_std_construct(p, curr_id,v4l2_norm_to_name(curr_id)); + v4l2_video_std_construct(p, curr_id, descr); p->index = index; - dbgarg (cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, " + dbgarg(cmd, "index=%d, id=%Ld, name=%s, fps=%d/%d, " "framelines=%d\n", p->index, (unsigned long long)p->id, p->name, p->frameperiod.numerator, p->frameperiod.denominator, p->framelines); - ret=0; + ret = 0; break; } case VIDIOC_G_STD: diff --git a/include/media/v4l2-dev.h b/include/media/v4l2-dev.h index 33f01ae..859f7a6 100644 --- a/include/media/v4l2-dev.h +++ b/include/media/v4l2-dev.h @@ -40,9 +40,9 @@ #define VFL_TYPE_VTX 3 /* Video standard functions */ -extern char *v4l2_norm_to_name(v4l2_std_id id); +extern const char *v4l2_norm_to_name(v4l2_std_id id); extern int v4l2_video_std_construct(struct v4l2_standard *vs, - int id, char *name); + int id, const char *name); /* Prints the ioctl in a human-readable format */ extern void v4l_printk_ioctl(unsigned int cmd); -- cgit v0.10.2 From 836c28584d4629fdc85365f083b84e1298e14312 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 21 Jun 2008 19:32:41 -0300 Subject: V4L/DVB (8096): au8522: prevent false-positive lock status This decreases scan time in Queens, New York from 28 minutes to 7 minutes, with the exact same services found. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb/frontends/au8522.c b/drivers/media/dvb/frontends/au8522.c index 978a287..03900d2 100644 --- a/drivers/media/dvb/frontends/au8522.c +++ b/drivers/media/dvb/frontends/au8522.c @@ -527,10 +527,8 @@ static int au8522_read_status(struct dvb_frontend *fe, fe_status_t *status) if (state->current_modulation == VSB_8) { dprintk("%s() Checking VSB_8\n", __func__); reg = au8522_readreg(state, 0x4088); - if (reg & 0x01) - *status |= FE_HAS_VITERBI; - if (reg & 0x02) - *status |= FE_HAS_LOCK | FE_HAS_SYNC; + if ((reg & 0x03) == 0x03) + *status |= FE_HAS_LOCK | FE_HAS_SYNC | FE_HAS_VITERBI; } else { dprintk("%s() Checking QAM\n", __func__); reg = au8522_readreg(state, 0x4541); -- cgit v0.10.2 From e470d8177ed6ae56f4310ce793a57bcb2fed1749 Mon Sep 17 00:00:00 2001 From: Steven Toth Date: Sat, 21 Jun 2008 21:06:02 -0300 Subject: V4L/DVB (8097): xc5000: check device hardware state to determine if firmware download is needed This patch ensures that the xc5000 will have firmware loaded as needed if the part is powered down or reset via gpio from the host. An example of this, in some cases, could be after the system resumes from standby or hibernate modes. Signed-off-by: Michael Krufky Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/common/tuners/xc5000.c b/drivers/media/common/tuners/xc5000.c index ceae6db..7cf4f5b 100644 --- a/drivers/media/common/tuners/xc5000.c +++ b/drivers/media/common/tuners/xc5000.c @@ -177,6 +177,7 @@ static XC_TV_STANDARD XC5000_Standard[MAX_TV_STANDARD] = { {"FM Radio-INPUT1", 0x0208, 0x9002} }; +static int xc5000_is_firmware_loaded(struct dvb_frontend *fe); static int xc5000_writeregs(struct xc5000_priv *priv, u8 *buf, u8 len); static int xc5000_readregs(struct xc5000_priv *priv, u8 *buf, u8 len); static void xc5000_TunerReset(struct dvb_frontend *fe); @@ -352,7 +353,7 @@ static int xc_SetTVStandard(struct xc5000_priv *priv, static int xc_shutdown(struct xc5000_priv *priv) { - return 0; + return XC_RESULT_SUCCESS; /* Fixme: cannot bring tuner back alive once shutdown * without reloading the driver modules. * return xc_write_reg(priv, XREG_POWER_DOWN, 0); @@ -685,6 +686,25 @@ static int xc5000_set_params(struct dvb_frontend *fe, return 0; } +static int xc5000_is_firmware_loaded(struct dvb_frontend *fe) +{ + struct xc5000_priv *priv = fe->tuner_priv; + int ret; + u16 id; + + ret = xc5000_readreg(priv, XREG_PRODUCT_ID, &id); + if (ret == XC_RESULT_SUCCESS) { + if (id == XC_PRODUCT_ID_FW_NOT_LOADED) + ret = XC_RESULT_RESET_FAILURE; + else + ret = XC_RESULT_SUCCESS; + } + + dprintk(1, "%s() returns %s id = 0x%x\n", __func__, + ret == XC_RESULT_SUCCESS ? "True" : "False", id); + return ret; +} + static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe); static int xc5000_set_analog_params(struct dvb_frontend *fe, @@ -693,7 +713,7 @@ static int xc5000_set_analog_params(struct dvb_frontend *fe, struct xc5000_priv *priv = fe->tuner_priv; int ret; - if(priv->fwloaded == 0) + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) xc_load_fw_and_init_tuner(fe); dprintk(1, "%s() frequency=%d (in units of 62.5khz)\n", @@ -808,11 +828,10 @@ static int xc_load_fw_and_init_tuner(struct dvb_frontend *fe) struct xc5000_priv *priv = fe->tuner_priv; int ret = 0; - if (priv->fwloaded == 0) { + if (xc5000_is_firmware_loaded(fe) != XC_RESULT_SUCCESS) { ret = xc5000_fwupload(fe); if (ret != XC_RESULT_SUCCESS) return ret; - priv->fwloaded = 1; } /* Start the tuner self-calibration process */ @@ -852,7 +871,6 @@ static int xc5000_sleep(struct dvb_frontend *fe) return -EREMOTEIO; } else { - /* priv->fwloaded = 0; */ return XC_RESULT_SUCCESS; } } @@ -933,7 +951,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, cfg->i2c_address); printk(KERN_INFO "xc5000: Firmware has been loaded previously\n"); - priv->fwloaded = 1; break; case XC_PRODUCT_ID_FW_NOT_LOADED: printk(KERN_INFO @@ -941,7 +958,6 @@ struct dvb_frontend *xc5000_attach(struct dvb_frontend *fe, cfg->i2c_address); printk(KERN_INFO "xc5000: Firmware has not been loaded previously\n"); - priv->fwloaded = 0; break; default: printk(KERN_ERR diff --git a/drivers/media/common/tuners/xc5000_priv.h b/drivers/media/common/tuners/xc5000_priv.h index ecebfe4..a72a988 100644 --- a/drivers/media/common/tuners/xc5000_priv.h +++ b/drivers/media/common/tuners/xc5000_priv.h @@ -30,7 +30,6 @@ struct xc5000_priv { u32 bandwidth; u8 video_standard; u8 rf_mode; - u8 fwloaded; void *devptr; }; -- cgit v0.10.2 From 5c554e6b984ce6b36488b93a7ec8e2752233e7cb Mon Sep 17 00:00:00 2001 From: Marcin Slusarz Date: Sun, 22 Jun 2008 09:11:40 -0300 Subject: V4L/DVB (8100): V4L/vivi: fix possible memory leak in vivi_fillbuff MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Move allocation after first check and fix memory leak. Noticed-by: Daniel Marjamäki Signed-off-by: Marcin Slusarz Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/vivi.c b/drivers/media/video/vivi.c index 845be18..5ff9a58 100644 --- a/drivers/media/video/vivi.c +++ b/drivers/media/video/vivi.c @@ -327,13 +327,14 @@ static void vivi_fillbuff(struct vivi_dev *dev, struct vivi_buffer *buf) int hmax = buf->vb.height; int wmax = buf->vb.width; struct timeval ts; - char *tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC); + char *tmpbuf; void *vbuf = videobuf_to_vmalloc(&buf->vb); - if (!tmpbuf) + if (!vbuf) return; - if (!vbuf) + tmpbuf = kmalloc(wmax * 2, GFP_ATOMIC); + if (!tmpbuf) return; for (h = 0; h < hmax; h++) { -- cgit v0.10.2 From a17898737eaed4ef41f273da7b830c632e06613e Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Sun, 22 Jun 2008 17:03:02 -0300 Subject: V4L/DVB (8108): Fix open/close race in saa7134 The saa7134 driver uses a (non-atomic) variable in an attempt to only allow one opener of the device (how it deals with sending the fd over unix sockets I don't know). Unfortunately, the release function first decrements this variable, and THEN goes on to disable more of the device. This allows for a race where another opener of the device comes in after the decrement of the variable, configures the hardware just to then see the hardware be disabled by the rest of the release function. This patch makes the release function use the same lock as the open function to protect the hardware as well as the variable (which now at least has some locking to protect it). Signed-off-by: Arjan van de Ven Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/saa7134/saa7134-empress.c b/drivers/media/video/saa7134/saa7134-empress.c index 1c8cd0e..3ae71a3 100644 --- a/drivers/media/video/saa7134/saa7134-empress.c +++ b/drivers/media/video/saa7134/saa7134-empress.c @@ -110,6 +110,8 @@ static int ts_release(struct inode *inode, struct file *file) { struct saa7134_dev *dev = file->private_data; + mutex_lock(&dev->empress_tsq.vb_lock); + videobuf_stop(&dev->empress_tsq); videobuf_mmap_free(&dev->empress_tsq); @@ -122,6 +124,8 @@ static int ts_release(struct inode *inode, struct file *file) dev->empress_users--; + mutex_unlock(&dev->empress_tsq.vb_lock); + return 0; } -- cgit v0.10.2 From f471f92339860c35b561cf45ad563ab1ff07c386 Mon Sep 17 00:00:00 2001 From: Michal Schmidt Date: Thu, 26 Jun 2008 16:06:19 +0200 Subject: s2io: fix documentation about intr_type The documentation for intr_type module parameter of the s2io driver is not consistent with the code. The comments in drivers/net/s2io.c are OK, but Documentation/networking/s2io.txt is wrong. Pointed out by Andrew Hecox. Signed-off-by: Michal Schmidt Signed-off-by: Jeff Garzik diff --git a/Documentation/networking/s2io.txt b/Documentation/networking/s2io.txt index 4bde53e..1e28e2d 100644 --- a/Documentation/networking/s2io.txt +++ b/Documentation/networking/s2io.txt @@ -83,9 +83,9 @@ Valid range: Limited by memory on system Default: 30 e. intr_type -Specifies interrupt type. Possible values 1(INTA), 2(MSI), 3(MSI-X) -Valid range: 1-3 -Default: 1 +Specifies interrupt type. Possible values 0(INTA), 2(MSI-X) +Valid values: 0, 2 +Default: 2 5. Performance suggestions General: -- cgit v0.10.2 From 59524a37446e18a672188d86d23c8c76fd488621 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Wed, 25 Jun 2008 11:41:01 +0900 Subject: tc35815: Mark carrier-off before starting PHY Call netif_carrier_off() before starting PHY device. This is a behavior before converting to generic PHY layer. Signed-off-by: Atsushi Nemoto Signed-off-by: Jeff Garzik diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index 10e4e85..dccea52 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1394,6 +1394,7 @@ tc35815_open(struct net_device *dev) tc35815_chip_init(dev); spin_unlock_irq(&lp->lock); + netif_carrier_off(dev); /* schedule a link state check */ phy_start(lp->phy_dev); @@ -2453,6 +2454,7 @@ static int tc35815_resume(struct pci_dev *pdev) return 0; pci_set_power_state(pdev, PCI_D0); tc35815_restart(dev); + netif_carrier_off(dev); if (lp->phy_dev) phy_start(lp->phy_dev); netif_device_attach(dev); -- cgit v0.10.2 From ccc57aac9c9532b4540968632a8c4a0b946dbcc4 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Thu, 26 Jun 2008 17:14:15 +0900 Subject: tc35815: Fix receiver hangup on Rx FIFO overflow On Rx FIFO overflow error, the controller consume a buffer descriptor but currently the driver does not give it back to the controller. This results unrecoverable 'Buffer List Exhausted' condition. This patch fix this problem by moving a "fbl_count--" line to proper place. Signed-off-by: Atsushi Nemoto Signed-off-by: Jeff Garzik diff --git a/drivers/net/tc35815.c b/drivers/net/tc35815.c index dccea52..b07b8cb 100644 --- a/drivers/net/tc35815.c +++ b/drivers/net/tc35815.c @@ -1736,7 +1736,6 @@ tc35815_rx(struct net_device *dev) skb = lp->rx_skbs[cur_bd].skb; prefetch(skb->data); lp->rx_skbs[cur_bd].skb = NULL; - lp->fbl_count--; pci_unmap_single(lp->pci_dev, lp->rx_skbs[cur_bd].skb_dma, RX_BUF_SIZE, PCI_DMA_FROMDEVICE); @@ -1792,6 +1791,7 @@ tc35815_rx(struct net_device *dev) #ifdef TC35815_USE_PACKEDBUFFER while (lp->fbl_curid != id) #else + lp->fbl_count--; while (lp->fbl_count < RX_BUF_NUM) #endif { -- cgit v0.10.2 From 6f4a0e45c6392f84436004d4c04d31b8ff5071c5 Mon Sep 17 00:00:00 2001 From: Paul Larson Date: Tue, 24 Jun 2008 17:00:56 -0700 Subject: ixgbe: fix EEH recovery during reset on PPC EEh is not recovering in a resonable amount of time on PPC during ixgbe_down(). Signed-off-by: Paul Larson Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Kirsher Signed-off-by: Jeff Garzik diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 7b85922..8f04609 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1969,7 +1969,8 @@ void ixgbe_down(struct ixgbe_adapter *adapter) netif_carrier_off(netdev); netif_stop_queue(netdev); - ixgbe_reset(adapter); + if (!pci_channel_offline(adapter->pdev)) + ixgbe_reset(adapter); ixgbe_clean_all_tx_rings(adapter); ixgbe_clean_all_rx_rings(adapter); -- cgit v0.10.2 From 3023682e74bc17debc6aa5e234ae1d0b0e198719 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Tue, 24 Jun 2008 17:01:15 -0700 Subject: igb: fix EEH recovery during reset on PPC EEH is not recovering in a reasonable amount of time on PPC during igb_down(). Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Garzik diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c index ae398f0..e79a26a 100644 --- a/drivers/net/igb/igb_main.c +++ b/drivers/net/igb/igb_main.c @@ -718,7 +718,8 @@ void igb_down(struct igb_adapter *adapter) adapter->link_speed = 0; adapter->link_duplex = 0; - igb_reset(adapter); + if (!pci_channel_offline(adapter->pdev)) + igb_reset(adapter); igb_clean_all_tx_rings(adapter); igb_clean_all_rx_rings(adapter); } -- cgit v0.10.2 From 52cc30862a8f90c98be8eb527d00e5e06d398b22 Mon Sep 17 00:00:00 2001 From: Jeff Kirsher Date: Tue, 24 Jun 2008 17:01:29 -0700 Subject: e1000e: fix EEH recovery during reset on PPC EEH is not recovering in a reasonable amount of time on PPC during e1000e_down(). Signed-off-by: Jeff Kirsher Signed-off-by: Jesse Brandeburg Signed-off-by: Jeff Garzik diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index cab1835..648a87b 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2535,7 +2535,8 @@ void e1000e_down(struct e1000_adapter *adapter) adapter->link_speed = 0; adapter->link_duplex = 0; - e1000e_reset(adapter); + if (!pci_channel_offline(adapter->pdev)) + e1000e_reset(adapter); e1000_clean_tx_ring(adapter); e1000_clean_rx_ring(adapter); -- cgit v0.10.2 From 54299ef7e9ae4b5d47b02f3abea168cdc62a6f70 Mon Sep 17 00:00:00 2001 From: Komuro Date: Sat, 7 Jun 2008 21:37:56 +0900 Subject: pcnet_cs, axnet_cs: clear bogus interrupt before request_irq Signed-off-by: Komuro Signed-off-by: Jeff Garzik diff --git a/drivers/net/pcmcia/axnet_cs.c b/drivers/net/pcmcia/axnet_cs.c index ce95c5d..70d012e 100644 --- a/drivers/net/pcmcia/axnet_cs.c +++ b/drivers/net/pcmcia/axnet_cs.c @@ -525,12 +525,14 @@ static int axnet_open(struct net_device *dev) int ret; axnet_dev_t *info = PRIV(dev); struct pcmcia_device *link = info->p_dev; + unsigned int nic_base = dev->base_addr; DEBUG(2, "axnet_open('%s')\n", dev->name); if (!pcmcia_dev_present(link)) return -ENODEV; + outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, "axnet_cs", dev); if (ret) return ret; diff --git a/drivers/net/pcmcia/pcnet_cs.c b/drivers/net/pcmcia/pcnet_cs.c index fd8158a..2d4c4ad 100644 --- a/drivers/net/pcmcia/pcnet_cs.c +++ b/drivers/net/pcmcia/pcnet_cs.c @@ -969,6 +969,7 @@ static int pcnet_open(struct net_device *dev) int ret; pcnet_dev_t *info = PRIV(dev); struct pcmcia_device *link = info->p_dev; + unsigned int nic_base = dev->base_addr; DEBUG(2, "pcnet_open('%s')\n", dev->name); @@ -976,6 +977,8 @@ static int pcnet_open(struct net_device *dev) return -ENODEV; set_misc_reg(dev); + + outb_p(0xFF, nic_base + EN0_ISR); /* Clear bogus intr. */ ret = request_irq(dev->irq, ei_irq_wrapper, IRQF_SHARED, dev_info, dev); if (ret) return ret; -- cgit v0.10.2 From 3f6602ad56dc538a846367bd6a05ac7ac4d3e641 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 23 Jun 2008 23:12:31 +0200 Subject: drivers/net/r6040.c: Eliminate double sizeof Taking sizeof the result of sizeof is quite strange and does not seem to be what is wanted here. This was fixed using the following semantic patch. (http://www.emn.fr/x-info/coccinelle/) // @@ expression E; @@ - sizeof ( sizeof (E) - ) // Signed-off-by: Julia Lawall Signed-off-by: Jeff Garzik diff --git a/drivers/net/r6040.c b/drivers/net/r6040.c index 858b191..504a48f 100644 --- a/drivers/net/r6040.c +++ b/drivers/net/r6040.c @@ -273,7 +273,7 @@ static void r6040_init_ring_desc(struct r6040_descriptor *desc_ring, dma_addr_t mapping = desc_dma; while (size-- > 0) { - mapping += sizeof(sizeof(*desc)); + mapping += sizeof(*desc); desc->ndesc = cpu_to_le32(mapping); desc->vndescp = desc + 1; desc++; -- cgit v0.10.2 From ecfecfb5e39165b3f7f6d93aacd268edfe7c3524 Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Mon, 23 Jun 2008 14:34:29 +0300 Subject: ipg: fix jumbo frame compilation Make jumbo frame support compile again. It was broken by the cleanup series before the merge because the code is hidden under JUMBO_FRAME #ifdef. Tested-by: Andrew Savchenko Signed-off-by: Pekka Enberg Signed-off-by: Jeff Garzik diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index 679a082..dbb77e3 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -1271,7 +1271,7 @@ static void ipg_nic_rx_with_end(struct net_device *dev, framelen = le64_to_cpu(rxfd->rfs) & IPG_RFS_RXFRAMELEN; - endframeLen = framelen - jumbo->current_size; + endframelen = framelen - jumbo->current_size; /* if (framelen > IPG_RXFRAG_SIZE) framelen=IPG_RXFRAG_SIZE; @@ -1279,8 +1279,8 @@ static void ipg_nic_rx_with_end(struct net_device *dev, if (framelen > IPG_RXSUPPORT_SIZE) dev_kfree_skb_irq(jumbo->skb); else { - memcpy(skb_put(jumbo->skb, endframeLen), - skb->data, endframeLen); + memcpy(skb_put(jumbo->skb, endframelen), + skb->data, endframelen); jumbo->skb->protocol = eth_type_trans(jumbo->skb, dev); @@ -1352,16 +1352,16 @@ static int ipg_nic_rx(struct net_device *dev) switch (ipg_nic_rx_check_frame_type(dev)) { case FRAME_WITH_START_WITH_END: - ipg_nic_rx_with_start_and_end(dev, tp, rxfd, entry); + ipg_nic_rx_with_start_and_end(dev, sp, rxfd, entry); break; case FRAME_WITH_START: - ipg_nic_rx_with_start(dev, tp, rxfd, entry); + ipg_nic_rx_with_start(dev, sp, rxfd, entry); break; case FRAME_WITH_END: - ipg_nic_rx_with_end(dev, tp, rxfd, entry); + ipg_nic_rx_with_end(dev, sp, rxfd, entry); break; case FRAME_NO_START_NO_END: - ipg_nic_rx_no_start_no_end(dev, tp, rxfd, entry); + ipg_nic_rx_no_start_no_end(dev, sp, rxfd, entry); break; } } -- cgit v0.10.2 From e8399fed7e9f2e76eb65852612b16732129b9f3f Mon Sep 17 00:00:00 2001 From: Pekka Enberg Date: Mon, 23 Jun 2008 14:34:50 +0300 Subject: ipg: use NULL, not zero, for pointers Fixes a sparse warning in a code block that's hidden under JUMBO_FRAME #ifdef. Tested-by: Andrew Savchenko Signed-off-by: Pekka Enberg Signed-off-by: Jeff Garzik diff --git a/drivers/net/ipg.c b/drivers/net/ipg.c index dbb77e3..2c03f4e 100644 --- a/drivers/net/ipg.c +++ b/drivers/net/ipg.c @@ -1808,7 +1808,7 @@ static int ipg_nic_open(struct net_device *dev) /* initialize JUMBO Frame control variable */ sp->jumbo.found_start = 0; sp->jumbo.current_size = 0; - sp->jumbo.skb = 0; + sp->jumbo.skb = NULL; dev->mtu = IPG_TXFRAG_SIZE; #endif -- cgit v0.10.2 From c5643cab7bf663ae049b11be43de8819683176dd Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Mon, 23 Jun 2008 10:41:23 +0200 Subject: [netdrvr] 3c59x: remove irqs_disabled warning from local_bh_enable Original Author: Michael Buesch net, vortex: fix lockup Ingo Molnar reported: -tip testing found that Johannes Berg's "softirq: remove irqs_disabled warning from local_bh_enable" enhancement to lockdep triggers a new warning on an old testbox that uses 3c59x vortex and netlogging: -----> calling vortex_init+0x0/0xb0 PCI: Found IRQ 10 for device 0000:00:0b.0 PCI: Sharing IRQ 10 with 0000:00:0a.0 PCI: Sharing IRQ 10 with 0000:00:0b.1 3c59x: Donald Becker and others. 0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at e0800400. PCI: Enabling bus mastering for device 0000:00:0b.0 initcall vortex_init+0x0/0xb0 returned 0 after 47 msecs ... calling init_netconsole+0x0/0x1b0 netconsole: local port 4444 netconsole: local IP 10.0.1.9 netconsole: interface eth0 netconsole: remote port 4444 netconsole: remote IP 10.0.1.16 netconsole: remote ethernet address 00:19:xx:xx:xx:xx netconsole: device eth0 not up yet, forcing it eth0: setting half-duplex. eth0: setting full-duplex. ------------[ cut here ]------------ WARNING: at kernel/softirq.c:137 local_bh_enable_ip+0xd1/0xe0() Pid: 1, comm: swapper Not tainted 2.6.26-rc6-tip #2091 [] warn_on_slowpath+0x4f/0x70 [] ? release_console_sem+0x1b4/0x1d0 [] ? vprintk+0x2a0/0x450 [] ? __mod_timer+0xa5/0xc0 [] ? mdio_sync+0x3d/0x50 [] ? marker_probe_cb+0x46/0xa0 [] ? printk+0x27/0x50 [] ? vortex_set_duplex+0x43/0xc0 [] ? vortex_set_duplex+0xa1/0xc0 [] ? vortex_timer+0xe2/0x3e0 [] local_bh_enable_ip+0xd1/0xe0 [] _spin_unlock_bh+0x2f/0x40 [] vortex_timer+0xe2/0x3e0 [] ? trace_hardirqs_on+0xb/0x10 [] ? trace_hardirqs_on_caller+0x88/0x160 [] run_timer_softirq+0x162/0x1c0 [] ? vortex_timer+0x0/0x3e0 [] local_bh_enable_ip+0xd1/0xe0 [] _spin_unlock_bh+0x2f/0x40 [] vortex_timer+0xe2/0x3e0 [] ? trace_hardirqs_on+0xb/0x10 [] ? trace_hardirqs_on_caller+0x88/0x160 [] run_timer_softirq+0x162/0x1c0 [] ? vortex_timer+0x0/0x3e0 [] ? vortex_timer+0x0/0x3e0 [] __do_softirq+0x9a/0x160 [] ? __do_softirq+0x0/0x160 [] call_on_stack+0x15/0x30 [] ? irq_exit+0x55/0x60 [] ? do_IRQ+0x85/0xd0 [] ? trace_hardirqs_on_caller+0xc1/0x160 [] ? common_interrupt+0x28/0x30 [] ? mutex_unlock+0x8/0x10 [] ? _cond_resched+0x10/0x30 [] ? netpoll_setup+0x117/0x390 [] ? init_netconsole+0x14e/0x1b0 [] ? ktime_get+0x19/0x40 [] ? kernel_init+0x1b2/0x2c0 [] ? init_netconsole+0x0/0x1b0 [] ? trace_hardirqs_on_thunk+0xc/0x10 [] ? restore_nocheck_notrace+0x0/0xe [] ? kernel_init+0x0/0x2c0 [] ? kernel_init+0x0/0x2c0 [] ? kernel_thread_helper+0x7/0x10 ======================= ---[ end trace 37f9c502aff112e0 ]--- console [netcon0] enabled netconsole: network logging started initcall init_netconsole+0x0/0x1b0 returned 0 after 2914 msecs looking at the driver I think the bug is real and the fix actually is trivial. vp->lock is also taken in hardware IRQ context, so we _have_ to always use irqsafe locking. As we run in a timer with IRQs disabled, we can simply use spin_lock. Cc: Signed-off-by: Ingo Molnar Signed-off-by: Jeff Garzik diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 2edda8c..aabad8c 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -1768,9 +1768,10 @@ vortex_timer(unsigned long data) case XCVR_MII: case XCVR_NWAY: { ok = 1; - spin_lock_bh(&vp->lock); + /* Interrupts are already disabled */ + spin_lock(&vp->lock); vortex_check_media(dev, 0); - spin_unlock_bh(&vp->lock); + spin_unlock(&vp->lock); } break; default: /* Other media types handled by Tx timeouts. */ -- cgit v0.10.2 From 70081ac55df939363b27c1ebd27c51f510129139 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 23 Jun 2008 02:04:50 +0100 Subject: [netdrvr] netxen: fix netxen_pci_tbl[] breakage PCI_DEVICE_CLASS sets .device and .vendor to PCI_ANY_DEV, which overrides the effect of preceding PCI_DEVICE() and makes all elements of netxen_pci_tbl[] identical. Introduced in the commit dcd56fdbaeae1008044687b973c4a3e852e8a726. Signed-off-by: Al Viro Signed-off-by: Jeff Garzik diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index 6797ed0..63cd67b 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -71,14 +71,18 @@ static irqreturn_t netxen_intr(int irq, void *data); static irqreturn_t netxen_msi_intr(int irq, void *data); /* PCI Device ID Table */ +#define ENTRY(device) \ + {PCI_DEVICE(0x4040, (device)), \ + .class = PCI_CLASS_NETWORK_ETHERNET << 8, .class_mask = ~0} + static struct pci_device_id netxen_pci_tbl[] __devinitdata = { - {PCI_DEVICE(0x4040, 0x0001), PCI_DEVICE_CLASS(0x020000, ~0)}, - {PCI_DEVICE(0x4040, 0x0002), PCI_DEVICE_CLASS(0x020000, ~0)}, - {PCI_DEVICE(0x4040, 0x0003), PCI_DEVICE_CLASS(0x020000, ~0)}, - {PCI_DEVICE(0x4040, 0x0004), PCI_DEVICE_CLASS(0x020000, ~0)}, - {PCI_DEVICE(0x4040, 0x0005), PCI_DEVICE_CLASS(0x020000, ~0)}, - {PCI_DEVICE(0x4040, 0x0024), PCI_DEVICE_CLASS(0x020000, ~0)}, - {PCI_DEVICE(0x4040, 0x0025), PCI_DEVICE_CLASS(0x020000, ~0)}, + ENTRY(0x0001), + ENTRY(0x0002), + ENTRY(0x0003), + ENTRY(0x0004), + ENTRY(0x0005), + ENTRY(0x0024), + ENTRY(0x0025), {0,} }; -- cgit v0.10.2 From 1923815d855e1daec931fc9f2221fb73ca708870 Mon Sep 17 00:00:00 2001 From: Kevin Hao Date: Sat, 21 Jun 2008 18:20:35 +0800 Subject: e100: Do pci_dma_sync after skb_alloc for proper operation on ixp4xx The E100 device can't work on current kernel (2.6.26-rc6) and will cause kernel corruption on intel ixdp4xx. Signed-off-by: Jeff Garzik diff --git a/drivers/net/e100.c b/drivers/net/e100.c index f3cba5e..1037b13 100644 --- a/drivers/net/e100.c +++ b/drivers/net/e100.c @@ -1803,6 +1803,8 @@ static int e100_rx_alloc_skb(struct nic *nic, struct rx *rx) if (rx->prev->skb) { struct rfd *prev_rfd = (struct rfd *)rx->prev->skb->data; put_unaligned_le32(rx->dma_addr, &prev_rfd->link); + pci_dma_sync_single_for_device(nic->pdev, rx->prev->dma_addr, + sizeof(struct rfd), PCI_DMA_TODEVICE); } return 0; -- cgit v0.10.2 From 581abbc26a7adb693fb8b913f1be18d1c349c1ab Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Thu, 19 Jun 2008 17:19:02 -0400 Subject: e1000: only enable TSO6 via ethtool when using correct hardware When enabling TSO via ethool on e1000, it is possible to set NETIF_F_TSO6 on hardware that does not support it. Setting TSO via ethtool now matches the settings used when the hardware is probed. Signed-off-by: Andy Gospodarek Signed-off-by: Jeff Garzik diff --git a/drivers/net/e1000/e1000_ethtool.c b/drivers/net/e1000/e1000_ethtool.c index 701531e..a3f6a9c 100644 --- a/drivers/net/e1000/e1000_ethtool.c +++ b/drivers/net/e1000/e1000_ethtool.c @@ -347,7 +347,7 @@ e1000_set_tso(struct net_device *netdev, u32 data) else netdev->features &= ~NETIF_F_TSO; - if (data) + if (data && (adapter->hw.mac_type > e1000_82547_rev_2)) netdev->features |= NETIF_F_TSO6; else netdev->features &= ~NETIF_F_TSO6; -- cgit v0.10.2 From 64c42f697661e27c9688a32c1ba61d0228e81d84 Mon Sep 17 00:00:00 2001 From: Andi Kleen Date: Wed, 18 Jun 2008 13:58:36 +0200 Subject: [netdrvr] Fix IOMMU overflow checking in s2io.c s2io has IOMMU overflow checking, but unfortunately it is wrong. It didn't use the standard macros, which meant that it only worked on POWER and SPARC because only those define DMA_ERROR_CODE. Convert it to use the standard macros instead. I also commented two more bugs in the IOMMU handling. It assumes that 0 DMA addresses cannot happen, but that's not true in all IOMMU setups. The information if a buffer has been already mapped needs to be stored elsewhere. Didn't fix those because it needs careful checking of the buffer handling by the maintainers. Cc: ram.vepa@neterion.com Cc: santosh.rastapur@neterion.com Cc: sivakumar.subramani@neterion.com Cc: sreenivasa.honnur@neterion.com Signed-off-by: Andi Kleen Signed-off-by: Jeff Garzik diff --git a/drivers/net/s2io.c b/drivers/net/s2io.c index b5c1e66..ae7b697 100644 --- a/drivers/net/s2io.c +++ b/drivers/net/s2io.c @@ -2625,9 +2625,7 @@ static int fill_rx_buffers(struct ring_info *ring) rxdp1->Buffer0_ptr = pci_map_single (ring->pdev, skb->data, size - NET_IP_ALIGN, PCI_DMA_FROMDEVICE); - if( (rxdp1->Buffer0_ptr == 0) || - (rxdp1->Buffer0_ptr == - DMA_ERROR_CODE)) + if(pci_dma_mapping_error(rxdp1->Buffer0_ptr)) goto pci_map_failed; rxdp->Control_2 = @@ -2657,6 +2655,7 @@ static int fill_rx_buffers(struct ring_info *ring) skb->data = (void *) (unsigned long)tmp; skb_reset_tail_pointer(skb); + /* AK: check is wrong. 0 can be valid dma address */ if (!(rxdp3->Buffer0_ptr)) rxdp3->Buffer0_ptr = pci_map_single(ring->pdev, ba->ba_0, @@ -2665,8 +2664,7 @@ static int fill_rx_buffers(struct ring_info *ring) pci_dma_sync_single_for_device(ring->pdev, (dma_addr_t) rxdp3->Buffer0_ptr, BUF0_LEN, PCI_DMA_FROMDEVICE); - if( (rxdp3->Buffer0_ptr == 0) || - (rxdp3->Buffer0_ptr == DMA_ERROR_CODE)) + if (pci_dma_mapping_error(rxdp3->Buffer0_ptr)) goto pci_map_failed; rxdp->Control_2 = SET_BUFFER0_SIZE_3(BUF0_LEN); @@ -2681,18 +2679,17 @@ static int fill_rx_buffers(struct ring_info *ring) (ring->pdev, skb->data, ring->mtu + 4, PCI_DMA_FROMDEVICE); - if( (rxdp3->Buffer2_ptr == 0) || - (rxdp3->Buffer2_ptr == DMA_ERROR_CODE)) + if (pci_dma_mapping_error(rxdp3->Buffer2_ptr)) goto pci_map_failed; + /* AK: check is wrong */ if (!rxdp3->Buffer1_ptr) rxdp3->Buffer1_ptr = pci_map_single(ring->pdev, ba->ba_1, BUF1_LEN, PCI_DMA_FROMDEVICE); - if( (rxdp3->Buffer1_ptr == 0) || - (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) { + if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) { pci_unmap_single (ring->pdev, (dma_addr_t)(unsigned long) @@ -4264,16 +4261,14 @@ static int s2io_xmit(struct sk_buff *skb, struct net_device *dev) txdp->Buffer_Pointer = pci_map_single(sp->pdev, fifo->ufo_in_band_v, sizeof(u64), PCI_DMA_TODEVICE); - if((txdp->Buffer_Pointer == 0) || - (txdp->Buffer_Pointer == DMA_ERROR_CODE)) + if (pci_dma_mapping_error(txdp->Buffer_Pointer)) goto pci_map_failed; txdp++; } txdp->Buffer_Pointer = pci_map_single (sp->pdev, skb->data, frg_len, PCI_DMA_TODEVICE); - if((txdp->Buffer_Pointer == 0) || - (txdp->Buffer_Pointer == DMA_ERROR_CODE)) + if (pci_dma_mapping_error(txdp->Buffer_Pointer)) goto pci_map_failed; txdp->Host_Control = (unsigned long) skb; @@ -6884,10 +6879,8 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp, pci_map_single( sp->pdev, (*skb)->data, size - NET_IP_ALIGN, PCI_DMA_FROMDEVICE); - if( (rxdp1->Buffer0_ptr == 0) || - (rxdp1->Buffer0_ptr == DMA_ERROR_CODE)) { + if (pci_dma_mapping_error(rxdp1->Buffer0_ptr)) goto memalloc_failed; - } rxdp->Host_Control = (unsigned long) (*skb); } } else if ((sp->rxd_mode == RXD_MODE_3B) && (rxdp->Host_Control == 0)) { @@ -6913,15 +6906,12 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp, pci_map_single(sp->pdev, (*skb)->data, dev->mtu + 4, PCI_DMA_FROMDEVICE); - if( (rxdp3->Buffer2_ptr == 0) || - (rxdp3->Buffer2_ptr == DMA_ERROR_CODE)) { + if (pci_dma_mapping_error(rxdp3->Buffer2_ptr)) goto memalloc_failed; - } rxdp3->Buffer0_ptr = *temp0 = pci_map_single( sp->pdev, ba->ba_0, BUF0_LEN, PCI_DMA_FROMDEVICE); - if( (rxdp3->Buffer0_ptr == 0) || - (rxdp3->Buffer0_ptr == DMA_ERROR_CODE)) { + if (pci_dma_mapping_error(rxdp3->Buffer0_ptr)) { pci_unmap_single (sp->pdev, (dma_addr_t)rxdp3->Buffer2_ptr, dev->mtu + 4, PCI_DMA_FROMDEVICE); @@ -6933,8 +6923,7 @@ static int set_rxd_buffer_pointer(struct s2io_nic *sp, struct RxD_t *rxdp, rxdp3->Buffer1_ptr = *temp1 = pci_map_single(sp->pdev, ba->ba_1, BUF1_LEN, PCI_DMA_FROMDEVICE); - if( (rxdp3->Buffer1_ptr == 0) || - (rxdp3->Buffer1_ptr == DMA_ERROR_CODE)) { + if (pci_dma_mapping_error(rxdp3->Buffer1_ptr)) { pci_unmap_single (sp->pdev, (dma_addr_t)rxdp3->Buffer0_ptr, BUF0_LEN, PCI_DMA_FROMDEVICE); diff --git a/drivers/net/s2io.h b/drivers/net/s2io.h index 4706f7f..1827b66 100644 --- a/drivers/net/s2io.h +++ b/drivers/net/s2io.h @@ -75,10 +75,6 @@ static int debug_level = ERR_DBG; /* DEBUG message print. */ #define DBG_PRINT(dbg_level, args...) if(!(debug_level Date: Tue, 6 May 2008 19:36:26 +0100 Subject: qla3xxx: Hold RTNL while calling dev_close() dev_close() must be called holding the RTNL. Compile-tested only. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c index b7f7b22..bccee68 100644 --- a/drivers/net/qla3xxx.c +++ b/drivers/net/qla3xxx.c @@ -3701,7 +3701,9 @@ static int ql_cycle_adapter(struct ql3_adapter *qdev, int reset) printk(KERN_ERR PFX "%s: Driver up/down cycle failed, " "closing device\n",qdev->ndev->name); + rtnl_lock(); dev_close(qdev->ndev); + rtnl_unlock(); return -1; } return 0; -- cgit v0.10.2 From 3e3cda96d014b69f7723d1d4507897e5be6aceb7 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 6 May 2008 19:41:48 +0100 Subject: Hold RTNL while calling dev_close() dev_close() must be called holding the RTNL. Compile-tested only. Signed-off-by: Ben Hutchings Signed-off-by: Jeff Garzik diff --git a/drivers/net/wan/x25_asy.c b/drivers/net/wan/x25_asy.c index 249e180..069f8bb 100644 --- a/drivers/net/wan/x25_asy.c +++ b/drivers/net/wan/x25_asy.c @@ -32,6 +32,7 @@ #include #include #include +#include #include "x25_asy.h" #include @@ -601,8 +602,10 @@ static void x25_asy_close_tty(struct tty_struct *tty) if (!sl || sl->magic != X25_ASY_MAGIC) return; + rtnl_lock(); if (sl->dev->flags & IFF_UP) dev_close(sl->dev); + rtnl_unlock(); tty->disc_data = NULL; sl->tty = NULL; -- cgit v0.10.2 From 70a3143af87c6ca188107cbd49ab5eec2c86c456 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 21 Jun 2008 16:07:32 +0900 Subject: sata_uli: hardreset is broken sata_uli can't do hardresets reliably and lock up. This went unnoticed till now as softreset was the default and hardreset was only used after softreset failed. Reported by Christian Casteyde in bz#10860. Signed-off-by: Tejun Heo Cc: Christian Casteyde Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index f277cea..db529b8 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -83,6 +83,7 @@ static struct ata_port_operations uli_ops = { .inherits = &ata_bmdma_port_ops, .scr_read = uli_scr_read, .scr_write = uli_scr_write, + .hardreset = ATA_OP_NULL, }; static const struct ata_port_info uli_port_info = { -- cgit v0.10.2 From 980dfcb93232907034a2c92d62d3a7d6ac7bef44 Mon Sep 17 00:00:00 2001 From: Ivo van Doorn Date: Wed, 25 Jun 2008 21:27:00 +0200 Subject: rt2x00: Fix lock dependency errror This fixes a circular locking dependency in the workqueue handling. The interface work task uses the mac80211 function ieee80211_iterate_active_interfaces() which grabs the RTNL lock. However when the interface is brough down, this happens under the RTNL lock as well, this causes problems because mac80211 will flush the workqueue during the ifdown event. This causes mac80211 to wait until the driver has completed all work which can't finish because it is waiting on the RTNL lock. This is fixed by moving rt2x00 workqueue tasks on a different workqueue, this workqueue can be flushed when the ieee80211_hw structure is removed by the driver (when the driver is unloaded) which does not happen under the RTNL lock. Signed-off-by: Ivo van Doorn Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 611d983..b4bf1e0 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -821,6 +821,7 @@ struct rt2x00_dev { /* * Scheduled work. */ + struct workqueue_struct *workqueue; struct work_struct intf_work; struct work_struct filter_work; diff --git a/drivers/net/wireless/rt2x00/rt2x00dev.c b/drivers/net/wireless/rt2x00/rt2x00dev.c index 2673d56..c997d4f 100644 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c @@ -75,7 +75,7 @@ static void rt2x00lib_start_link_tuner(struct rt2x00_dev *rt2x00dev) rt2x00lib_reset_link_tuner(rt2x00dev); - queue_delayed_work(rt2x00dev->hw->workqueue, + queue_delayed_work(rt2x00dev->workqueue, &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } @@ -137,14 +137,6 @@ void rt2x00lib_disable_radio(struct rt2x00_dev *rt2x00dev) return; /* - * Stop all scheduled work. - */ - if (work_pending(&rt2x00dev->intf_work)) - cancel_work_sync(&rt2x00dev->intf_work); - if (work_pending(&rt2x00dev->filter_work)) - cancel_work_sync(&rt2x00dev->filter_work); - - /* * Stop the TX queues. */ ieee80211_stop_queues(rt2x00dev->hw); @@ -398,8 +390,8 @@ static void rt2x00lib_link_tuner(struct work_struct *work) * Increase tuner counter, and reschedule the next link tuner run. */ rt2x00dev->link.count++; - queue_delayed_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work, - LINK_TUNE_INTERVAL); + queue_delayed_work(rt2x00dev->workqueue, + &rt2x00dev->link.work, LINK_TUNE_INTERVAL); } static void rt2x00lib_packetfilter_scheduled(struct work_struct *work) @@ -433,6 +425,15 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, spin_unlock(&intf->lock); + /* + * It is possible the radio was disabled while the work had been + * scheduled. If that happens we should return here immediately, + * note that in the spinlock protected area above the delayed_flags + * have been cleared correctly. + */ + if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) + return; + if (delayed_flags & DELAYED_UPDATE_BEACON) { skb = ieee80211_beacon_get(rt2x00dev->hw, vif, &control); if (skb && rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw, @@ -441,7 +442,7 @@ static void rt2x00lib_intf_scheduled_iter(void *data, u8 *mac, } if (delayed_flags & DELAYED_CONFIG_ERP) - rt2x00lib_config_erp(rt2x00dev, intf, &intf->conf); + rt2x00lib_config_erp(rt2x00dev, intf, &conf); if (delayed_flags & DELAYED_LED_ASSOC) rt2x00leds_led_assoc(rt2x00dev, !!rt2x00dev->intf_associated); @@ -487,7 +488,7 @@ void rt2x00lib_beacondone(struct rt2x00_dev *rt2x00dev) rt2x00lib_beacondone_iter, rt2x00dev); - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); } EXPORT_SYMBOL_GPL(rt2x00lib_beacondone); @@ -1130,6 +1131,10 @@ int rt2x00lib_probe_dev(struct rt2x00_dev *rt2x00dev) /* * Initialize configuration work. */ + rt2x00dev->workqueue = create_singlethread_workqueue("rt2x00lib"); + if (!rt2x00dev->workqueue) + goto exit; + INIT_WORK(&rt2x00dev->intf_work, rt2x00lib_intf_scheduled); INIT_WORK(&rt2x00dev->filter_work, rt2x00lib_packetfilter_scheduled); INIT_DELAYED_WORK(&rt2x00dev->link.work, rt2x00lib_link_tuner); @@ -1190,6 +1195,13 @@ void rt2x00lib_remove_dev(struct rt2x00_dev *rt2x00dev) rt2x00leds_unregister(rt2x00dev); /* + * Stop all queued work. Note that most tasks will already be halted + * during rt2x00lib_disable_radio() and rt2x00lib_uninitialize(). + */ + flush_workqueue(rt2x00dev->workqueue); + destroy_workqueue(rt2x00dev->workqueue); + + /* * Free ieee80211_hw memory. */ rt2x00lib_remove_hw(rt2x00dev); diff --git a/drivers/net/wireless/rt2x00/rt2x00mac.c b/drivers/net/wireless/rt2x00/rt2x00mac.c index 87e280a..9cb023e 100644 --- a/drivers/net/wireless/rt2x00/rt2x00mac.c +++ b/drivers/net/wireless/rt2x00/rt2x00mac.c @@ -428,7 +428,7 @@ void rt2x00mac_configure_filter(struct ieee80211_hw *hw, if (!test_bit(DRIVER_REQUIRE_SCHEDULED, &rt2x00dev->flags)) rt2x00dev->ops->lib->config_filter(rt2x00dev, *total_flags); else - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->filter_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->filter_work); } EXPORT_SYMBOL_GPL(rt2x00mac_configure_filter); @@ -509,7 +509,7 @@ void rt2x00mac_bss_info_changed(struct ieee80211_hw *hw, memcpy(&intf->conf, bss_conf, sizeof(*bss_conf)); if (delayed) { intf->delayed_flags |= delayed; - queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->intf_work); + queue_work(rt2x00dev->workqueue, &rt2x00dev->intf_work); } spin_unlock(&intf->lock); } -- cgit v0.10.2 From 5f4a6fae46a214c4dce3bd63a6219a5f1c818c78 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 25 Jun 2008 14:20:37 -0700 Subject: prism: islpci_eth.c endianness fix clock is already cpu-endian (see le32_to_cpu slightly before), so le64_to_cpu doesn't make much sense. Signed-off-by: Harvey Harrison Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/prism54/islpci_eth.c b/drivers/net/wireless/prism54/islpci_eth.c index 762e85b..e43bae9 100644 --- a/drivers/net/wireless/prism54/islpci_eth.c +++ b/drivers/net/wireless/prism54/islpci_eth.c @@ -290,7 +290,7 @@ islpci_monitor_rx(islpci_private *priv, struct sk_buff **skb) avs->version = cpu_to_be32(P80211CAPTURE_VERSION); avs->length = cpu_to_be32(sizeof (struct avs_80211_1_header)); - avs->mactime = cpu_to_be64(le64_to_cpu(clock)); + avs->mactime = cpu_to_be64(clock); avs->hosttime = cpu_to_be64(jiffies); avs->phytype = cpu_to_be32(6); /*OFDM: 6 for (g), 8 for (a) */ avs->channel = cpu_to_be32(channel_of_freq(freq)); -- cgit v0.10.2 From 00eb7fe77eb455f807c396f9917f0f623d4c84bb Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Thu, 26 Jun 2008 12:13:46 +0300 Subject: mac80211: fix an oops in several failure paths in key allocation This patch fixes an oops in several failure paths in key allocation. This Oops occurs when freeing a key that has not been linked yet, so the key->sdata is not set. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Acked-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/key.c b/net/mac80211/key.c index 150d66d..220e83b 100644 --- a/net/mac80211/key.c +++ b/net/mac80211/key.c @@ -380,6 +380,15 @@ void ieee80211_key_free(struct ieee80211_key *key) if (!key) return; + if (!key->sdata) { + /* The key has not been linked yet, simply free it + * and don't Oops */ + if (key->conf.alg == ALG_CCMP) + ieee80211_aes_key_free(key->u.ccmp.tfm); + kfree(key); + return; + } + spin_lock_irqsave(&key->sdata->local->key_lock, flags); __ieee80211_key_free(key); spin_unlock_irqrestore(&key->sdata->local->key_lock, flags); -- cgit v0.10.2 From 0e3e2eabf4fbc0162e1f1eb4fd90cb3e9513a554 Mon Sep 17 00:00:00 2001 From: Richard Sharpe Date: Tue, 24 Jun 2008 19:11:13 -0700 Subject: firewire: fw-sbp2: fix parsing of logical unit directories MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit There is a small off-by-one bug in firewire-sbp2. This causes problems when a device exports multiple LUN Directories. I found it when trying to talk to a SONY DVD Jukebox. Signed-off-by: Richard Sharpe Acked-by: Kristian Høgsberg Signed-off-by: Stefan Richter (op. order, changelog) diff --git a/drivers/firewire/fw-sbp2.c b/drivers/firewire/fw-sbp2.c index b2458bb..227d2e0 100644 --- a/drivers/firewire/fw-sbp2.c +++ b/drivers/firewire/fw-sbp2.c @@ -1051,7 +1051,8 @@ static int sbp2_scan_unit_dir(struct sbp2_target *tgt, u32 *directory, break; case SBP2_CSR_LOGICAL_UNIT_DIRECTORY: - if (sbp2_scan_logical_unit_dir(tgt, ci.p + value) < 0) + /* Adjust for the increment in the iterator */ + if (sbp2_scan_logical_unit_dir(tgt, ci.p - 1 + value) < 0) return -ENOMEM; break; } -- cgit v0.10.2 From b660398101cd0622325480a67ac88bb4d33d553a Mon Sep 17 00:00:00 2001 From: David Woodhouse Date: Fri, 27 Jun 2008 14:39:42 +0100 Subject: kbuild: fix a.out.h export to userspace with O= build. We need to check for existence of the a.out.h header in the source tree, not the object tree, if we want it to get the right answer with O=. Signed-off-by: David Woodhouse Signed-off-by: Sam Ravnborg diff --git a/include/asm-generic/Kbuild.asm b/include/asm-generic/Kbuild.asm index 92a6d91..7cd25b8 100644 --- a/include/asm-generic/Kbuild.asm +++ b/include/asm-generic/Kbuild.asm @@ -1,6 +1,6 @@ header-y += kvm.h -ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += auxvec.h diff --git a/include/asm-powerpc/Kbuild b/include/asm-powerpc/Kbuild index 7381916..bca352e 100644 --- a/include/asm-powerpc/Kbuild +++ b/include/asm-powerpc/Kbuild @@ -1,6 +1,5 @@ include include/asm-generic/Kbuild.asm -header-y += a.out.h header-y += auxvec.h header-y += ioctls.h header-y += mman.h diff --git a/include/linux/Kbuild b/include/linux/Kbuild index b6fbb25..71d70d1 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -166,7 +166,7 @@ unifdef-y += acct.h unifdef-y += adb.h unifdef-y += adfs_fs.h unifdef-y += agpgart.h -ifeq ($(wildcard include/asm-$(SRCARCH)/a.out.h),include/asm-$(SRCARCH)/a.out.h) +ifneq ($(wildcard $(srctree)/include/asm-$(SRCARCH)/a.out.h),) unifdef-y += a.out.h endif unifdef-y += apm_bios.h -- cgit v0.10.2 From 8c2e870a625bd336b2e7a65a97c1836acef07322 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:30:52 +1000 Subject: Ensure interrupted recovery completed properly (v1 metadata plus bitmap) If, while assembling an array, we find a device which is not fully in-sync with the array, it is important to set the "fullsync" flags. This is an exact analog to the setting of this flag in hot_add_disk methods. Currently, only v1.x metadata supports having devices in an array which are not fully in-sync (it keep track of how in sync they are). The 'fullsync' flag only makes a difference when a write-intent bitmap is being used. In this case it tells recovery to ignore the bitmap and recovery all blocks. This fix is already in place for raid1, but not raid5/6 or raid10. So without this fix, a raid1 ir raid4/5/6 array with version 1.x metadata and a write intent bitmaps, that is stopped in the middle of a recovery, will appear to complete the recovery instantly after it is reassembled, but the recovery will not be correct. If you might have an array like that, issueing echo repair > /sys/block/mdXX/md/sync_action will make sure recovery completes properly. Cc: Signed-off-by: Neil Brown diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 1de17da..a71277b 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -2137,6 +2137,8 @@ static int run(mddev_t *mddev) !test_bit(In_sync, &disk->rdev->flags)) { disk->head_position = 0; mddev->degraded++; + if (disk->rdev) + conf->fullsync = 1; } } diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index c37e256..475fba4 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -4305,7 +4305,9 @@ static int run(mddev_t *mddev) " disk %d\n", bdevname(rdev->bdev,b), raid_disk); working_disks++; - } + } else + /* Cannot rely on bitmap to complete recovery */ + conf->fullsync = 1; } /* -- cgit v0.10.2 From efe311431869b40d67911820a309f9a1a41306f3 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:31:14 +1000 Subject: Don't acknowlege that stripe-expand is complete until it really is. We shouldn't acknowledge that a stripe has been expanded (When reshaping a raid5 by adding a device) until the moved data has actually been written out. However we are currently acknowledging (by calling md_done_sync) when the POST_XOR is complete and before the write. So track in s.locked whether there are pending writes, and don't call md_done_sync yet if there are. Note: we all set R5_LOCKED on devices which are are about to read from. This probably isn't technically necessary, but is usually done when writing a block, and justifies the use of s.locked here. This bug can lead to a crash if an array is stopped while an reshape is in progress. Cc: Signed-off-by: Neil Brown diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 475fba4..54c8ee2 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2898,6 +2898,8 @@ static void handle_stripe5(struct stripe_head *sh) for (i = conf->raid_disks; i--; ) { set_bit(R5_Wantwrite, &sh->dev[i].flags); + set_bit(R5_LOCKED, &dev->flags); + s.locked++; if (!test_and_set_bit(STRIPE_OP_IO, &sh->ops.pending)) sh->ops.count++; } @@ -2911,6 +2913,7 @@ static void handle_stripe5(struct stripe_head *sh) conf->raid_disks); s.locked += handle_write_operations5(sh, 1, 1); } else if (s.expanded && + s.locked == 0 && !test_bit(STRIPE_OP_POSTXOR, &sh->ops.pending)) { clear_bit(STRIPE_EXPAND_READY, &sh->state); atomic_dec(&conf->reshape_stripes); -- cgit v0.10.2 From 9bbbca3a0ee09293108b67835c6bdf6196d7bcb3 Mon Sep 17 00:00:00 2001 From: Neil Brown Date: Sat, 28 Jun 2008 08:31:17 +1000 Subject: Fix error paths if md_probe fails. md_probe can fail (e.g. alloc_disk could fail) without returning an error (as it alway returns NULL). So when we call mddev_find immediately afterwards, we need to check that md_probe actually succeeded. This means checking that mdev->gendisk is non-NULL. cc: Cc: Dave Jones Signed-off-by: Neil Brown diff --git a/drivers/md/md.c b/drivers/md/md.c index 7cf512a..2580ac1 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -3897,8 +3897,10 @@ static void autorun_devices(int part) md_probe(dev, NULL, NULL); mddev = mddev_find(dev); - if (!mddev) { - printk(KERN_ERR + if (!mddev || !mddev->gendisk) { + if (mddev) + mddev_put(mddev); + printk(KERN_ERR "md: cannot allocate memory for md drive.\n"); break; } -- cgit v0.10.2 From 479798211967cd828e09ce27775b8cbfe99462ab Mon Sep 17 00:00:00 2001 From: Andre Haupt Date: Fri, 27 Jun 2008 17:22:08 -0700 Subject: hamradio: remove unused variable Signed-off-by: Andre Haupt Signed-off-by: David S. Miller diff --git a/drivers/net/hamradio/dmascc.c b/drivers/net/hamradio/dmascc.c index 0b94833..e8cfade 100644 --- a/drivers/net/hamradio/dmascc.c +++ b/drivers/net/hamradio/dmascc.c @@ -1077,8 +1077,6 @@ static inline void rx_off(struct scc_priv *priv) static void start_timer(struct scc_priv *priv, int t, int r15) { - unsigned long flags; - outb(priv->tmr_mode, priv->tmr_ctrl); if (t == 0) { tm_isr(priv); -- cgit v0.10.2 From 57413ebc4e0f1e471a3b4db4aff9a85c083d090e Mon Sep 17 00:00:00 2001 From: Miquel van Smoorenburg Date: Fri, 27 Jun 2008 17:23:57 -0700 Subject: tcp: calculate tcp_mem based on low memory instead of all memory The tcp_mem array which contains limits on the total amount of memory used by TCP sockets is calculated based on nr_all_pages. On a 32 bits x86 system, we should base this on the number of lowmem pages. Signed-off-by: Miquel van Smoorenburg Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index fc54a48..850825d 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -260,6 +260,8 @@ #include #include #include +#include +#include #include #include #include @@ -2620,7 +2622,7 @@ __setup("thash_entries=", set_thash_entries); void __init tcp_init(void) { struct sk_buff *skb = NULL; - unsigned long limit; + unsigned long nr_pages, limit; int order, i, max_share; BUILD_BUG_ON(sizeof(struct tcp_skb_cb) > sizeof(skb->cb)); @@ -2689,8 +2691,9 @@ void __init tcp_init(void) * is up to 1/2 at 256 MB, decreasing toward zero with the amount of * memory, with a floor of 128 pages. */ - limit = min(nr_all_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT); - limit = (limit * (nr_all_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11); + nr_pages = totalram_pages - totalhigh_pages; + limit = min(nr_pages, 1UL<<(28-PAGE_SHIFT)) >> (20-PAGE_SHIFT); + limit = (limit * (nr_pages >> (20-PAGE_SHIFT))) >> (PAGE_SHIFT-11); limit = max(limit, 128UL); sysctl_tcp_mem[0] = limit / 4 * 3; sysctl_tcp_mem[1] = limit; -- cgit v0.10.2 From db43a282d3ec92ea45109c5551fff3dcc5afef02 Mon Sep 17 00:00:00 2001 From: Octavian Purdila Date: Fri, 27 Jun 2008 17:27:21 -0700 Subject: tcp: fix for splice receive when used with software LRO If an skb has nr_frags set to zero but its frag_list is not empty (as it can happen if software LRO is enabled), and a previous tcp_read_sock has consumed the linear part of the skb, then __skb_splice_bits: (a) incorrectly reports an error and (b) forgets to update the offset to account for the linear part Any of the two problems will cause the subsequent __skb_splice_bits call (the one that handles the frag_list skbs) to either skip data, or, if the unadjusted offset is greater then the size of the next skb in the frag_list, make tcp_splice_read loop forever. Signed-off-by: Octavian Purdila Signed-off-by: David S. Miller diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 1e556d3..3666216 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1292,12 +1292,14 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, { unsigned int nr_pages = spd->nr_pages; unsigned int poff, plen, len, toff, tlen; - int headlen, seg; + int headlen, seg, error = 0; toff = *offset; tlen = *total_len; - if (!tlen) + if (!tlen) { + error = 1; goto err; + } /* * if the offset is greater than the linear part, go directly to @@ -1339,7 +1341,8 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, * just jump directly to update and return, no point * in going over fragments when the output is full. */ - if (spd_fill_page(spd, virt_to_page(p), plen, poff, skb)) + error = spd_fill_page(spd, virt_to_page(p), plen, poff, skb); + if (error) goto done; tlen -= plen; @@ -1369,7 +1372,8 @@ map_frag: if (!plen) break; - if (spd_fill_page(spd, f->page, plen, poff, skb)) + error = spd_fill_page(spd, f->page, plen, poff, skb); + if (error) break; tlen -= plen; @@ -1382,7 +1386,10 @@ done: return 0; } err: - return 1; + /* update the offset to reflect the linear part skip, if any */ + if (!error) + *offset = toff; + return error; } /* -- cgit v0.10.2 From ec0d215f9420564fc8286dcf93d2d068bb53a07e Mon Sep 17 00:00:00 2001 From: Rainer Weikusat Date: Fri, 27 Jun 2008 19:34:18 -0700 Subject: af_unix: fix 'poll for write'/connected DGRAM sockets For n:1 'datagram connections' (eg /dev/log), the unix_dgram_sendmsg routine implements a form of receiver-imposed flow control by comparing the length of the receive queue of the 'peer socket' with the max_ack_backlog value stored in the corresponding sock structure, either blocking the thread which caused the send-routine to be called or returning EAGAIN. This routine is used by both SOCK_DGRAM and SOCK_SEQPACKET sockets. The poll-implementation for these socket types is datagram_poll from core/datagram.c. A socket is deemed to be writeable by this routine when the memory presently consumed by datagrams owned by it is less than the configured socket send buffer size. This is always wrong for PF_UNIX non-stream sockets connected to server sockets dealing with (potentially) multiple clients if the abovementioned receive queue is currently considered to be full. 'poll' will then return, indicating that the socket is writeable, but a subsequent write result in EAGAIN, effectively causing an (usual) application to 'poll for writeability by repeated send request with O_NONBLOCK set' until it has consumed its time quantum. The change below uses a suitably modified variant of the datagram_poll routines for both type of PF_UNIX sockets, which tests if the recv-queue of the peer a socket is connected to is presently considered to be 'full' as part of the 'is this socket writeable'-checking code. The socket being polled is additionally put onto the peer_wait wait queue associated with its peer, because the unix_dgram_recvmsg routine does a wake up on this queue after a datagram was received and the 'other wakeup call' is done implicitly as part of skb destruction, meaning, a process blocked in poll because of a full peer receive queue could otherwise sleep forever if no datagram owned by its socket was already sitting on this queue. Among this change is a small (inline) helper routine named 'unix_recvq_full', which consolidates the actual testing code (in three different places) into a single location. Signed-off-by: Rainer Weikusat Signed-off-by: David S. Miller diff --git a/net/unix/af_unix.c b/net/unix/af_unix.c index 657835f..783317d 100644 --- a/net/unix/af_unix.c +++ b/net/unix/af_unix.c @@ -487,8 +487,8 @@ static int unix_socketpair(struct socket *, struct socket *); static int unix_accept(struct socket *, struct socket *, int); static int unix_getname(struct socket *, struct sockaddr *, int *, int); static unsigned int unix_poll(struct file *, struct socket *, poll_table *); -static unsigned int unix_datagram_poll(struct file *, struct socket *, - poll_table *); +static unsigned int unix_dgram_poll(struct file *, struct socket *, + poll_table *); static int unix_ioctl(struct socket *, unsigned int, unsigned long); static int unix_shutdown(struct socket *, int); static int unix_stream_sendmsg(struct kiocb *, struct socket *, @@ -534,7 +534,7 @@ static const struct proto_ops unix_dgram_ops = { .socketpair = unix_socketpair, .accept = sock_no_accept, .getname = unix_getname, - .poll = unix_datagram_poll, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = sock_no_listen, .shutdown = unix_shutdown, @@ -555,7 +555,7 @@ static const struct proto_ops unix_seqpacket_ops = { .socketpair = unix_socketpair, .accept = unix_accept, .getname = unix_getname, - .poll = unix_datagram_poll, + .poll = unix_dgram_poll, .ioctl = unix_ioctl, .listen = unix_listen, .shutdown = unix_shutdown, @@ -1994,29 +1994,13 @@ static unsigned int unix_poll(struct file * file, struct socket *sock, poll_tabl return mask; } -static unsigned int unix_datagram_poll(struct file *file, struct socket *sock, - poll_table *wait) +static unsigned int unix_dgram_poll(struct file *file, struct socket *sock, + poll_table *wait) { - struct sock *sk = sock->sk, *peer; - unsigned int mask; + struct sock *sk = sock->sk, *other; + unsigned int mask, writable; poll_wait(file, sk->sk_sleep, wait); - - peer = unix_peer_get(sk); - if (peer) { - if (peer != sk) { - /* - * Writability of a connected socket additionally - * depends on the state of the receive queue of the - * peer. - */ - poll_wait(file, &unix_sk(peer)->peer_wait, wait); - } else { - sock_put(peer); - peer = NULL; - } - } - mask = 0; /* exceptional events? */ @@ -2042,14 +2026,26 @@ static unsigned int unix_datagram_poll(struct file *file, struct socket *sock, } /* writable? */ - if (unix_writable(sk) && !(peer && unix_recvq_full(peer))) + writable = unix_writable(sk); + if (writable) { + other = unix_peer_get(sk); + if (other) { + if (unix_peer(other) != sk) { + poll_wait(file, &unix_sk(other)->peer_wait, + wait); + if (unix_recvq_full(other)) + writable = 0; + } + + sock_put(other); + } + } + + if (writable) mask |= POLLOUT | POLLWRNORM | POLLWRBAND; else set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags); - if (peer) - sock_put(peer); - return mask; } -- cgit v0.10.2 From 5dbaec5dc6a4895db8bf9765a867418481ed7311 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Fri, 27 Jun 2008 19:35:16 -0700 Subject: netdevice: Fix typo of dev_unicast_add() comment Signed-off-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index c421a1f..56b4657 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -2973,7 +2973,7 @@ EXPORT_SYMBOL(dev_unicast_delete); /** * dev_unicast_add - add a secondary unicast address * @dev: device - * @addr: address to delete + * @addr: address to add * @alen: length of @addr * * Add a secondary unicast address to the device or increase -- cgit v0.10.2 From 01e123d79a23000f85c4cfb12a957908c0b2c3d8 Mon Sep 17 00:00:00 2001 From: WANG Cong Date: Fri, 27 Jun 2008 19:51:35 -0700 Subject: pkt_sched: ERR_PTR() ususally encodes an negative errno, not positive. Note, in the following patch, 'err' is initialized as: int err = -ENOBUFS; Signed-off-by: WANG Cong Signed-off-by: David S. Miller diff --git a/net/sched/sch_generic.c b/net/sched/sch_generic.c index d355e5e..13afa72 100644 --- a/net/sched/sch_generic.c +++ b/net/sched/sch_generic.c @@ -468,7 +468,7 @@ struct Qdisc *qdisc_alloc(struct net_device *dev, struct Qdisc_ops *ops) return sch; errout: - return ERR_PTR(-err); + return ERR_PTR(err); } struct Qdisc * qdisc_create_dflt(struct net_device *dev, struct Qdisc_ops *ops, -- cgit v0.10.2 From ede16af4cdbd21fa15d4178beb7c6fcbcccd07e9 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 27 Jun 2008 19:54:05 -0700 Subject: pkt_sched: Remove CONFIG_NET_SCH_RR Commit d62733c8e437fdb58325617c4b3331769ba82d70 ([SCHED]: Qdisc changes and sch_rr added for multiqueue) added a NET_SCH_RR option that was unused since the code went unconditionally into sch_prio. Reported-by: Robert P. J. Day Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller diff --git a/net/sched/Kconfig b/net/sched/Kconfig index 82adfe6..9437b27 100644 --- a/net/sched/Kconfig +++ b/net/sched/Kconfig @@ -106,17 +106,6 @@ config NET_SCH_PRIO To compile this code as a module, choose M here: the module will be called sch_prio. -config NET_SCH_RR - tristate "Multi Band Round Robin Queuing (RR)" - select NET_SCH_PRIO - ---help--- - Say Y here if you want to use an n-band round robin packet - scheduler. - - The module uses sch_prio for its framework and is aliased as - sch_rr, so it will load sch_prio, although it is referred - to using sch_rr. - config NET_SCH_RED tristate "Random Early Detection (RED)" ---help--- -- cgit v0.10.2 From c88e6f51c2154c7606f7e281bcca2d1a2c89d7b2 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Fri, 27 Jun 2008 19:54:54 -0700 Subject: include/linux/netdevice.h: don't export MAX_HEADER to userspace Due to the CONFIG_'s the value is anyway not correct in userspace. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f27fd20..25f8710 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -88,6 +88,8 @@ struct wireless_dev; #define NETDEV_TX_BUSY 1 /* driver tx path was busy*/ #define NETDEV_TX_LOCKED -1 /* driver tx lock was already taken */ +#ifdef __KERNEL__ + /* * Compute the worst case header length according to the protocols * used. @@ -114,6 +116,8 @@ struct wireless_dev; #define MAX_HEADER (LL_MAX_HEADER + 48) #endif +#endif /* __KERNEL__ */ + struct net_device_subqueue { /* Give a control state for each queue. This struct may contain -- cgit v0.10.2 From 7be87351a1f6430426e88b4fcde353ab3330caff Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 27 Jun 2008 20:00:19 -0700 Subject: tcp: /proc/net/tcp rto,ato values not scaled properly (v2) I found another case where we are sending information to userspace in the wrong HZ scale. This should have been fixed back in 2.5 :-( This means an ABI change but as it stands there is no way for an application like ss to get the right value. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 12695be..ffe869a 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -2291,7 +2291,7 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len) } seq_printf(f, "%4d: %08X:%04X %08X:%04X %02X %08X:%08X %02X:%08lX " - "%08X %5d %8d %lu %d %p %u %u %u %u %d%n", + "%08X %5d %8d %lu %d %p %lu %lu %u %u %d%n", i, src, srcp, dest, destp, sk->sk_state, tp->write_seq - tp->snd_una, sk->sk_state == TCP_LISTEN ? sk->sk_ack_backlog : @@ -2303,8 +2303,8 @@ static void get_tcp4_sock(struct sock *sk, struct seq_file *f, int i, int *len) icsk->icsk_probes_out, sock_i_ino(sk), atomic_read(&sk->sk_refcnt), sk, - icsk->icsk_rto, - icsk->icsk_ack.ato, + jiffies_to_clock_t(icsk->icsk_rto), + jiffies_to_clock_t(icsk->icsk_ack.ato), (icsk->icsk_ack.quick << 1) | icsk->icsk_ack.pingpong, tp->snd_cwnd, tp->snd_ssthresh >= 0xFFFF ? -1 : tp->snd_ssthresh, diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index cb46749..40ea9c3 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -2036,7 +2036,7 @@ static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i) seq_printf(seq, "%4d: %08X%08X%08X%08X:%04X %08X%08X%08X%08X:%04X " - "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %u %u %u %u %d\n", + "%02X %08X:%08X %02X:%08lX %08X %5d %8d %lu %d %p %lu %lu %u %u %d\n", i, src->s6_addr32[0], src->s6_addr32[1], src->s6_addr32[2], src->s6_addr32[3], srcp, @@ -2052,8 +2052,8 @@ static void get_tcp6_sock(struct seq_file *seq, struct sock *sp, int i) icsk->icsk_probes_out, sock_i_ino(sp), atomic_read(&sp->sk_refcnt), sp, - icsk->icsk_rto, - icsk->icsk_ack.ato, + jiffies_to_clock_t(icsk->icsk_rto), + jiffies_to_clock_t(icsk->icsk_ack.ato), (icsk->icsk_ack.quick << 1 ) | icsk->icsk_ack.pingpong, tp->snd_cwnd, tp->snd_ssthresh>=0xFFFF?-1:tp->snd_ssthresh ); -- cgit v0.10.2 From 10b595aff138961b520bfed51d664fd99980f6e9 Mon Sep 17 00:00:00 2001 From: Julius Volz Date: Fri, 27 Jun 2008 20:02:14 -0700 Subject: netlink: Fix some doc comments in net/netlink/attr.c Fix some doc comments to match function and attribute names in net/netlink/attr.c. Signed-off-by: Julius Volz Signed-off-by: David S. Miller diff --git a/net/netlink/attr.c b/net/netlink/attr.c index 47bbf45..2d106cf 100644 --- a/net/netlink/attr.c +++ b/net/netlink/attr.c @@ -132,6 +132,7 @@ errout: * @maxtype: maximum attribute type to be expected * @head: head of attribute stream * @len: length of attribute stream + * @policy: validation policy * * Parses a stream of attributes and stores a pointer to each attribute in * the tb array accessable via the attribute type. Attributes with a type @@ -194,7 +195,7 @@ struct nlattr *nla_find(struct nlattr *head, int len, int attrtype) /** * nla_strlcpy - Copy string attribute payload into a sized buffer * @dst: where to copy the string to - * @src: attribute to copy the string from + * @nla: attribute to copy the string from * @dstsize: size of destination buffer * * Copies at most dstsize - 1 bytes into the destination buffer. @@ -340,9 +341,9 @@ struct nlattr *nla_reserve(struct sk_buff *skb, int attrtype, int attrlen) } /** - * nla_reserve - reserve room for attribute without header + * nla_reserve_nohdr - reserve room for attribute without header * @skb: socket buffer to reserve room on - * @len: length of attribute payload + * @attrlen: length of attribute payload * * Reserves room for attribute payload without a header. * -- cgit v0.10.2 From a0a61a604c60c14accc3962ecfeee9acc7a3c08a Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 27 Jun 2008 20:03:24 -0700 Subject: CONNECTOR: add a proc entry to list connectors I got a problem when I wanted to check if the kernel supports process event connector, and It seems there's no way to do this check. At best I can check if the kernel supports connector or not, by looking into /proc/net/netlink, or maybe checking the return value of bind() to see if it's ENOENT. So it would be useful to add /proc/net/connector to list all supported connectors: # cat /proc/net/connector Name ID connector 4294967295:4294967295 cn_proc 1:1 w1 3:1 Changelog: - fix memory leak: s/seq_release/single_release - use spin_lock_bh instead of spin_lock_irqsave Signed-off-by: Li Zefan Acked-by: Evgeniy Polyakov Signed-off-by: David S. Miller diff --git a/drivers/connector/connector.c b/drivers/connector/connector.c index 85e2ba7..bf48300 100644 --- a/drivers/connector/connector.c +++ b/drivers/connector/connector.c @@ -27,6 +27,8 @@ #include #include #include +#include +#include #include @@ -403,6 +405,40 @@ static void cn_callback(void *data) mutex_unlock(¬ify_lock); } +static int cn_proc_show(struct seq_file *m, void *v) +{ + struct cn_queue_dev *dev = cdev.cbdev; + struct cn_callback_entry *cbq; + + seq_printf(m, "Name ID\n"); + + spin_lock_bh(&dev->queue_lock); + + list_for_each_entry(cbq, &dev->queue_list, callback_entry) { + seq_printf(m, "%-15s %u:%u\n", + cbq->id.name, + cbq->id.id.idx, + cbq->id.id.val); + } + + spin_unlock_bh(&dev->queue_lock); + + return 0; +} + +static int cn_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, cn_proc_show, NULL); +} + +static const struct file_operations cn_file_ops = { + .owner = THIS_MODULE, + .open = cn_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release +}; + static int __devinit cn_init(void) { struct cn_dev *dev = &cdev; @@ -434,6 +470,8 @@ static int __devinit cn_init(void) return -EINVAL; } + proc_net_fops_create(&init_net, "connector", S_IRUGO, &cn_file_ops); + return 0; } @@ -443,6 +481,8 @@ static void __devexit cn_fini(void) cn_already_initialized = 0; + proc_net_remove(&init_net, "connector"); + cn_del_callback(&dev->id); cn_queue_free_dev(dev->cbdev); netlink_kernel_release(dev->nls); -- cgit v0.10.2 From 9a375803feaadb6c34e0807bd9325885dcca5c00 Mon Sep 17 00:00:00 2001 From: Pavel Emelyanov Date: Fri, 27 Jun 2008 20:06:08 -0700 Subject: inet fragments: fix race between inet_frag_find and inet_frag_secret_rebuild The problem is that while we work w/o the inet_frags.lock even read-locked the secret rebuild timer may occur (on another CPU, since BHs are still disabled in the inet_frag_find) and change the rnd seed for ipv4/6 fragments. It was caused by my patch fd9e63544cac30a34c951f0ec958038f0529e244 ([INET]: Omit double hash calculations in xxx_frag_intern) late in the 2.6.24 kernel, so this should probably be queued to -stable. Signed-off-by: Pavel Emelyanov Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_fragment.c b/net/ipv4/inet_fragment.c index 4ed429b..0546a0b 100644 --- a/net/ipv4/inet_fragment.c +++ b/net/ipv4/inet_fragment.c @@ -192,14 +192,21 @@ EXPORT_SYMBOL(inet_frag_evictor); static struct inet_frag_queue *inet_frag_intern(struct netns_frags *nf, struct inet_frag_queue *qp_in, struct inet_frags *f, - unsigned int hash, void *arg) + void *arg) { struct inet_frag_queue *qp; #ifdef CONFIG_SMP struct hlist_node *n; #endif + unsigned int hash; write_lock(&f->lock); + /* + * While we stayed w/o the lock other CPU could update + * the rnd seed, so we need to re-calculate the hash + * chain. Fortunatelly the qp_in can be used to get one. + */ + hash = f->hashfn(qp_in); #ifdef CONFIG_SMP /* With SMP race we have to recheck hash table, because * such entry could be created on other cpu, while we @@ -247,7 +254,7 @@ static struct inet_frag_queue *inet_frag_alloc(struct netns_frags *nf, } static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf, - struct inet_frags *f, void *arg, unsigned int hash) + struct inet_frags *f, void *arg) { struct inet_frag_queue *q; @@ -255,7 +262,7 @@ static struct inet_frag_queue *inet_frag_create(struct netns_frags *nf, if (q == NULL) return NULL; - return inet_frag_intern(nf, q, f, hash, arg); + return inet_frag_intern(nf, q, f, arg); } struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, @@ -264,7 +271,6 @@ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, struct inet_frag_queue *q; struct hlist_node *n; - read_lock(&f->lock); hlist_for_each_entry(q, n, &f->hash[hash], list) { if (q->net == nf && f->match(q, key)) { atomic_inc(&q->refcnt); @@ -274,6 +280,6 @@ struct inet_frag_queue *inet_frag_find(struct netns_frags *nf, } read_unlock(&f->lock); - return inet_frag_create(nf, f, key, hash); + return inet_frag_create(nf, f, key); } EXPORT_SYMBOL(inet_frag_find); diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index cd6ce6a..37221f6 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -229,6 +229,8 @@ static inline struct ipq *ip_find(struct net *net, struct iphdr *iph, u32 user) arg.iph = iph; arg.user = user; + + read_lock(&ip4_frags.lock); hash = ipqhashfn(iph->id, iph->saddr, iph->daddr, iph->protocol); q = inet_frag_find(&net->ipv4.frags, &ip4_frags, &arg, hash); diff --git a/net/ipv6/netfilter/nf_conntrack_reasm.c b/net/ipv6/netfilter/nf_conntrack_reasm.c index e65e26e..cf20bc4 100644 --- a/net/ipv6/netfilter/nf_conntrack_reasm.c +++ b/net/ipv6/netfilter/nf_conntrack_reasm.c @@ -207,9 +207,10 @@ fq_find(__be32 id, struct in6_addr *src, struct in6_addr *dst) arg.id = id; arg.src = src; arg.dst = dst; + + read_lock_bh(&nf_frags.lock); hash = ip6qhashfn(id, src, dst); - local_bh_disable(); q = inet_frag_find(&nf_init_frags, &nf_frags, &arg, hash); local_bh_enable(); if (q == NULL) diff --git a/net/ipv6/reassembly.c b/net/ipv6/reassembly.c index 798cabc..a60d7d1 100644 --- a/net/ipv6/reassembly.c +++ b/net/ipv6/reassembly.c @@ -247,6 +247,8 @@ fq_find(struct net *net, __be32 id, struct in6_addr *src, struct in6_addr *dst, arg.id = id; arg.src = src; arg.dst = dst; + + read_lock(&ip6_frags.lock); hash = ip6qhashfn(id, src, dst); q = inet_frag_find(&net->ipv6.frags, &ip6_frags, &arg, hash); -- cgit v0.10.2 From 251a4b320f2352598f84e4452ab538aa8064af52 Mon Sep 17 00:00:00 2001 From: Eli Cohen Date: Fri, 27 Jun 2008 20:09:00 -0700 Subject: net/inet_lro: remove setting skb->ip_summed when not LRO-able When an SKB cannot be chained to a session, the current code attempts to "restore" its ip_summed field from lro_mgr->ip_summed. However, lro_mgr->ip_summed does not hold the original value; in fact, we'd better not touch skb->ip_summed since it is not modified by the code in the path leading to a failure to chain it. Also use a cleaer comment to the describe the ip_summed field of struct net_lro_mgr. Issue raised by Or Gerlitz Signed-off-by: Eli Cohen Signed-off-by: David S. Miller diff --git a/include/linux/inet_lro.h b/include/linux/inet_lro.h index 80335b7..c4335fa 100644 --- a/include/linux/inet_lro.h +++ b/include/linux/inet_lro.h @@ -84,7 +84,11 @@ struct net_lro_mgr { from received packets and eth protocol is still ETH_P_8021Q */ - u32 ip_summed; /* Set in non generated SKBs in page mode */ + /* + * Set for generated SKBs that are not added to + * the frag list in fragmented mode + */ + u32 ip_summed; u32 ip_summed_aggr; /* Set in aggregated SKBs: CHECKSUM_UNNECESSARY * or CHECKSUM_NONE */ diff --git a/net/ipv4/inet_lro.c b/net/ipv4/inet_lro.c index 4a4d49f..cfd034a 100644 --- a/net/ipv4/inet_lro.c +++ b/net/ipv4/inet_lro.c @@ -383,8 +383,7 @@ static int __lro_proc_skb(struct net_lro_mgr *lro_mgr, struct sk_buff *skb, out2: /* send aggregated SKBs to stack */ lro_flush(lro_mgr, lro_desc); -out: /* Original SKB has to be posted to stack */ - skb->ip_summed = lro_mgr->ip_summed; +out: return 1; } -- cgit v0.10.2 From 59d88c00cafe5192b058abf4f3ce17c2e27d1c09 Mon Sep 17 00:00:00 2001 From: Paul Moore Date: Fri, 27 Jun 2008 20:12:32 -0700 Subject: netlabel: Fix a problem when dumping the default IPv6 static labels There is a missing "!" in a conditional statement which is causing entries to be skipped when dumping the default IPv6 static label entries. This can be demonstrated by running the following: # netlabelctl unlbl add default address:::1 \ label:system_u:object_r:unlabeled_t:s0 # netlabelctl -p unlbl list ... you will notice that the entry for the IPv6 localhost address is not displayed but does exist (works correctly, causes collisions when attempting to add duplicate entries, etc.). Signed-off-by: Paul Moore Signed-off-by: David S. Miller diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index 0099da5..52b2611 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -1534,7 +1534,7 @@ static int netlbl_unlabel_staticlistdef(struct sk_buff *skb, } } list_for_each_entry_rcu(addr6, &iface->addr6_list, list) { - if (addr6->valid || iter_addr6++ < skip_addr6) + if (!addr6->valid || iter_addr6++ < skip_addr6) continue; if (netlbl_unlabel_staticlist_gen(NLBL_UNLABEL_C_STATICLISTDEF, iface, -- cgit v0.10.2 From d420895efb259a78dda50f95289571faa6e10e41 Mon Sep 17 00:00:00 2001 From: YOSHIFUJI Hideaki Date: Fri, 27 Jun 2008 20:14:54 -0700 Subject: ipv6 route: Convert rt6_device_match() to use RT6_LOOKUP_F_xxx flags. The commit 77d16f450ae0452d7d4b009f78debb1294fb435c ("[IPV6] ROUTE: Unify RT6_F_xxx and RT6_SELECT_F_xxx flags") intended to pass various routing lookup hints around RT6_LOOKUP_F_xxx flags, but conversion was missing for rt6_device_match(). Signed-off-by: YOSHIFUJI Hideaki Signed-off-by: David S. Miller diff --git a/net/ipv6/route.c b/net/ipv6/route.c index d1f3e19..7ff6870 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -240,7 +240,7 @@ static inline int rt6_need_strict(struct in6_addr *daddr) static inline struct rt6_info *rt6_device_match(struct net *net, struct rt6_info *rt, int oif, - int strict) + int flags) { struct rt6_info *local = NULL; struct rt6_info *sprt; @@ -253,7 +253,7 @@ static inline struct rt6_info *rt6_device_match(struct net *net, if (dev->flags & IFF_LOOPBACK) { if (sprt->rt6i_idev == NULL || sprt->rt6i_idev->dev->ifindex != oif) { - if (strict && oif) + if (flags & RT6_LOOKUP_F_IFACE && oif) continue; if (local && (!oif || local->rt6i_idev->dev->ifindex == oif)) @@ -266,7 +266,7 @@ static inline struct rt6_info *rt6_device_match(struct net *net, if (local) return local; - if (strict) + if (flags & RT6_LOOKUP_F_IFACE) return net->ipv6.ip6_null_entry; } return rt; -- cgit v0.10.2 From 79c537998d143b127c8c662a403c3356cb885f1c Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Sun, 29 Jun 2008 00:16:56 +0200 Subject: sched: fix cpu hotplug the CPU hotplug problems (crashes under high-volume unplug+replug tests) seem to be related to migrate_dead_tasks(). Firstly I added traces to see all tasks being migrated with migrate_live_tasks() and migrate_dead_tasks(). On my setup the problem pops up (the one with "se == NULL" in the loop of pick_next_task_fair()) shortly after the traces indicate that some has been migrated with migrate_dead_tasks()). btw., I can reproduce it much faster now with just a plain cpu down/up loop. [disclaimer] Well, unless I'm really missing something important in this late hour [/desclaimer] pick_next_task() is not something appropriate for migrate_dead_tasks() :-) the following change seems to eliminate the problem on my setup (although, I kept it running only for a few minutes to get a few messages indicating migrate_dead_tasks() does move tasks and the system is still ok) Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index 3aaa5c8..a66e856 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5887,6 +5887,7 @@ static void migrate_dead_tasks(unsigned int dead_cpu) next = pick_next_task(rq, rq->curr); if (!next) break; + next->sched_class->put_prev_task(rq, next); migrate_dead(dead_cpu, next); } -- cgit v0.10.2 From f72e9df0e04c0ea7b5c97e6db5b114234bf3c36f Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Thu, 26 Jun 2008 10:54:34 +0300 Subject: Fix and clean top .gitignore Removed vmlinux* rule because it matches too many useful files, replacing it with rules matching filetype by filename (e.g. *.gz). Also unignored .mailmap from the top directory. Added a comment telling the user how to check for tracked files being ignored. Signed-off-by: Eduard - Gabriel Munteanu Signed-off-by: Linus Torvalds diff --git a/.gitignore b/.gitignore index 9bb1cb6..869e1a3 100644 --- a/.gitignore +++ b/.gitignore @@ -3,6 +3,10 @@ # subdirectories here. Add them in the ".gitignore" file # in that subdirectory instead. # +# NOTE! Please use 'git-ls-files -i --exclude-standard' +# command after changing this file, to see if there are +# any tracked files which get ignored after the change. +# # Normal rules # .* @@ -18,19 +22,21 @@ *.lst *.symtypes *.order +*.elf +*.bin +*.gz # # Top-level generic files # tags TAGS -vmlinux* -!vmlinux.lds.S -!vmlinux.lds.h +vmlinux System.map Module.markers Module.symvers !.gitignore +!.mailmap # # Generated include files -- cgit v0.10.2 From fcb43042ef55d2f46b0efa5d7746967cef38f056 Mon Sep 17 00:00:00 2001 From: "Zhang, Yanmin" Date: Tue, 24 Jun 2008 16:06:23 +0800 Subject: x86: fix cpu hotplug crash Vegard Nossum reported crashes during cpu hotplug tests: http://marc.info/?l=linux-kernel&m=121413950227884&w=4 In function _cpu_up, the panic happens when calling __raw_notifier_call_chain at the second time. Kernel doesn't panic when calling it at the first time. If just say because of nr_cpu_ids, that's not right. By checking the source code, I found that function do_boot_cpu is the culprit. Consider below call chain: _cpu_up=>__cpu_up=>smp_ops.cpu_up=>native_cpu_up=>do_boot_cpu. So do_boot_cpu is called in the end. In do_boot_cpu, if boot_error==true, cpu_clear(cpu, cpu_possible_map) is executed. So later on, when _cpu_up calls __raw_notifier_call_chain at the second time to report CPU_UP_CANCELED, because this cpu is already cleared from cpu_possible_map, get_cpu_sysdev returns NULL. Many resources are related to cpu_possible_map, so it's better not to change it. Below patch against 2.6.26-rc7 fixes it by removing the bit clearing in cpu_possible_map. Signed-off-by: Zhang Yanmin Tested-by: Vegard Nossum Acked-by: Rusty Russell Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 56078d6..3e1cece 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -996,7 +996,6 @@ do_rest: #endif cpu_clear(cpu, cpu_callout_map); /* was set by do_boot_cpu() */ cpu_clear(cpu, cpu_initialized); /* was set by cpu_init() */ - cpu_clear(cpu, cpu_possible_map); cpu_clear(cpu, cpu_present_map); per_cpu(x86_cpu_to_apicid, cpu) = BAD_APICID; } -- cgit v0.10.2 From 11dbc963a8f6128595d0f6ecf138dc369e144997 Mon Sep 17 00:00:00 2001 From: TAKADA Yoshihito Date: Mon, 30 Jun 2008 13:44:45 +0900 Subject: ptrace GET/SET FPXREGS broken When I update kernel 2.6.25 from 2.6.24, gdb does not work. On 2.6.25, ptrace(PTRACE_GETFPXREGS, ...) returns ENODEV. But 2.6.24 kernel's ptrace() returns EIO. It is issue of compatibility. I attached test program as pt.c and patch for fix it. #include #include #include #include #include #include #include struct user_fxsr_struct { unsigned short cwd; unsigned short swd; unsigned short twd; unsigned short fop; long fip; long fcs; long foo; long fos; long mxcsr; long reserved; long st_space[32]; /* 8*16 bytes for each FP-reg = 128 bytes */ long xmm_space[32]; /* 8*16 bytes for each XMM-reg = 128 bytes */ long padding[56]; }; int main(void) { pid_t pid; pid = fork(); switch(pid){ case -1:/* error */ break; case 0:/* child */ child(); break; default: parent(pid); break; } return 0; } int child(void) { ptrace(PTRACE_TRACEME); kill(getpid(), SIGSTOP); sleep(10); return 0; } int parent(pid_t pid) { int ret; struct user_fxsr_struct fpxregs; ret = ptrace(PTRACE_GETFPXREGS, pid, 0, &fpxregs); if(ret < 0){ printf("%d: %s.\n", errno, strerror(errno)); } kill(pid, SIGCONT); wait(pid); return 0; } /* in the kerel, at kernel/i387.c get_fpxregs() */ Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/i387.c b/arch/x86/kernel/i387.c index eb9ddd8..95e80e5 100644 --- a/arch/x86/kernel/i387.c +++ b/arch/x86/kernel/i387.c @@ -162,7 +162,7 @@ int xfpregs_get(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) @@ -179,7 +179,7 @@ int xfpregs_set(struct task_struct *target, const struct user_regset *regset, int ret; if (!cpu_has_fxsr) - return -ENODEV; + return -EIO; ret = init_fpu(target); if (ret) -- cgit v0.10.2 From 4bbff7e408a54cce88d26191191e8bcda2a60d55 Mon Sep 17 00:00:00 2001 From: Bastien Nocera Date: Thu, 26 Jun 2008 09:13:48 -0400 Subject: Input: add KEY_MEDIA_REPEAT definition This patch adds the Repeat key to the input layer. The usage in the HUT is 0xBC (listed under "15.7 Transport Controls"). Signed-off-by: Dmitry Torokhov diff --git a/include/linux/input.h b/include/linux/input.h index e075c4b..d150c57 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -534,8 +534,8 @@ struct input_absinfo { #define KEY_FRAMEBACK 0x1b4 /* Consumer - transport controls */ #define KEY_FRAMEFORWARD 0x1b5 - #define KEY_CONTEXT_MENU 0x1b6 /* GenDesc - system context menu */ +#define KEY_MEDIA_REPEAT 0x1b7 /* Consumer - transport control */ #define KEY_DEL_EOL 0x1c0 #define KEY_DEL_EOS 0x1c1 -- cgit v0.10.2 From 656acd2bbc4ce7f224de499ee255698701396c48 Mon Sep 17 00:00:00 2001 From: Dmitry Torokhov Date: Thu, 26 Jun 2008 11:30:02 -0400 Subject: Input: fix locking in force-feedback core The newly added event_lock spinlock in the input core disallows sleeping and therefore using mutexes in event handlers. Convert force-feedback core to rely on event_lock instead of mutex to protect slots allocated for fore-feedback effects. The original mutex is still used to serialize uploading and erasing of effects. Reported-by: Anssi Hannula Signed-off-by: Dmitry Torokhov diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index eebc724..4c01464 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -166,8 +166,10 @@ int input_ff_upload(struct input_dev *dev, struct ff_effect *effect, if (ret) goto out; + spin_lock_irq(&dev->event_lock); ff->effects[id] = *effect; ff->effect_owners[id] = file; + spin_unlock_irq(&dev->event_lock); out: mutex_unlock(&ff->mutex); @@ -189,16 +191,22 @@ static int erase_effect(struct input_dev *dev, int effect_id, if (error) return error; + spin_lock_irq(&dev->event_lock); ff->playback(dev, effect_id, 0); + ff->effect_owners[effect_id] = NULL; + spin_unlock_irq(&dev->event_lock); if (ff->erase) { error = ff->erase(dev, effect_id); - if (error) + if (error) { + spin_lock_irq(&dev->event_lock); + ff->effect_owners[effect_id] = file; + spin_unlock_irq(&dev->event_lock); + return error; + } } - ff->effect_owners[effect_id] = NULL; - return 0; } @@ -263,8 +271,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type, if (type != EV_FF) return 0; - mutex_lock(&ff->mutex); - switch (code) { case FF_GAIN: if (!test_bit(FF_GAIN, dev->ffbit) || value > 0xffff) @@ -286,7 +292,6 @@ int input_ff_event(struct input_dev *dev, unsigned int type, break; } - mutex_unlock(&ff->mutex); return 0; } EXPORT_SYMBOL_GPL(input_ff_event); -- cgit v0.10.2 From 08383ef29faa7fa247962e6b8662c8683e34da01 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Fri, 27 Jun 2008 15:15:12 +0100 Subject: [ARM] 5131/1: Annotate platform_secondary_init with trace_hardirqs_off This patch annotates the platform_secondary_init function in arch/arm/mach-realview/platsmp.c with trace_hardirqs_off to avoid a warning when LOCKDEP and TRACE_IRQFLAGS are enabled. Signed-off-by: Catalin Marinas Signed-off-by: Russell King diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index 3e57428..8e813ed 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -74,6 +74,8 @@ static DEFINE_SPINLOCK(boot_lock); void __cpuinit platform_secondary_init(unsigned int cpu) { + trace_hardirqs_off(); + /* * the primary core may have used a "cross call" soft interrupt * to get this processor out of WFI in the BootMonitor - make -- cgit v0.10.2 From a529b59060862b36a4dae968534e090c6c77272e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Jun 2008 20:13:31 +0200 Subject: Revert "BAST: Remove old IDE driver" This reverts commit ac1623625c5818bbdf5c68973098ba386ba7a004. It was premature to remove it now, we will do it post-2.6.26. Thanks to Russell King for noticing the issue. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 8e07de2..1607536 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -823,6 +823,13 @@ config BLK_DEV_IDE_RAPIDE Say Y here if you want to support the Yellowstone RapIDE controller manufactured for use with Acorn computers. +config BLK_DEV_IDE_BAST + tristate "Simtec BAST / Thorcom VR1000 IDE support" + depends on ARM && (ARCH_BAST || MACH_VR1000) + help + Say Y here if you want to support the onboard IDE channels on the + Simtec BAST or the Thorcom VR1000 + config IDE_H8300 tristate "H8300 IDE support" depends on H8300 diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 5bc2605..936e7b0 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -1,6 +1,7 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o +obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) diff --git a/drivers/ide/arm/bast-ide.c b/drivers/ide/arm/bast-ide.c new file mode 100644 index 0000000..8e8c281 --- /dev/null +++ b/drivers/ide/arm/bast-ide.c @@ -0,0 +1,90 @@ +/* + * Copyright (c) 2003-2004 Simtec Electronics + * Ben Dooks + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include +#include +#include +#include + +#include + +#include +#include +#include +#include +#include + +#define DRV_NAME "bast-ide" + +static int __init bastide_register(unsigned int base, unsigned int aux, int irq) +{ + ide_hwif_t *hwif; + hw_regs_t hw; + int i; + u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; + + memset(&hw, 0, sizeof(hw)); + + base += BAST_IDE_CS; + aux += BAST_IDE_CS; + + for (i = 0; i <= 7; i++) { + hw.io_ports_array[i] = (unsigned long)base; + base += 0x20; + } + + hw.io_ports.ctl_addr = aux + (6 * 0x20); + hw.irq = irq; + hw.chipset = ide_generic; + + hwif = ide_find_port(); + if (hwif == NULL) + goto out; + + i = hwif->index; + + ide_init_port_data(hwif, i); + ide_init_port_hw(hwif, &hw); + hwif->port_ops = NULL; + + idx[0] = i; + + ide_device_add(idx, NULL); +out: + return 0; +} + +static int __init bastide_init(void) +{ + unsigned long base = BAST_VA_IDEPRI + BAST_IDE_CS; + + /* we can treat the VR1000 and the BAST the same */ + + if (!(machine_is_bast() || machine_is_vr1000())) + return 0; + + printk("BAST: IDE driver, (c) 2003-2004 Simtec Electronics\n"); + + if (!request_mem_region(base, 0x400000, DRV_NAME)) { + printk(KERN_ERR "%s: resources busy\n", DRV_NAME); + return -EBUSY; + } + + bastide_register(BAST_VA_IDEPRI, BAST_VA_IDEPRIAUX, IRQ_IDE0); + bastide_register(BAST_VA_IDESEC, BAST_VA_IDESECAUX, IRQ_IDE1); + + return 0; +} + +module_init(bastide_init); + +MODULE_AUTHOR("Ben Dooks "); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Simtec BAST / Thorcom VR1000 IDE driver"); -- cgit v0.10.2 From 4283e1babe167e0ba856bb5d039465358e90785c Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Mon, 30 Jun 2008 20:14:45 +0200 Subject: ide: fix /proc/ide/ide?/mate reporting Now that we support warm-plug mate port will be registered even if there are no devices attached to it. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 55ec7f7..8af88bf 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -76,7 +76,7 @@ static int proc_ide_read_mate ide_hwif_t *hwif = (ide_hwif_t *) data; int len; - if (hwif && hwif->mate && hwif->mate->present) + if (hwif && hwif->mate) len = sprintf(page, "%s\n", hwif->mate->name); else len = sprintf(page, "(none)\n"); -- cgit v0.10.2 From 84ebe1cdae56707b9aa1b40ae5aa7d817ba745f5 Mon Sep 17 00:00:00 2001 From: Jozsef Kadlecsik Date: Mon, 30 Jun 2008 12:41:30 -0700 Subject: netfilter: nf_conntrack_tcp: fixing to check the lower bound of valid ACK MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Lost connections was reported by Thomas Bätzler (running 2.6.25 kernel) on the netfilter mailing list (see the thread "Weird nat/conntrack Problem with PASV FTP upload"). He provided tcpdump recordings which helped to find a long lingering bug in conntrack. In TCP connection tracking, checking the lower bound of valid ACK could lead to mark valid packets as INVALID because: - We have got a "higher or equal" inequality, but the test checked the "higher" condition only; fixed. - If the packet contains a SACK option, it could occur that the ACK value was before the left edge of our (S)ACK "window": if a previous packet from the other party intersected the right edge of the window of the receiver, we could move forward the window parameters beyond accepting a valid ack. Therefore in this patch we check the rightmost SACK edge instead of the ACK value in the lower bound of valid (S)ACK test. Signed-off-by: Jozsef Kadlecsik Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index ba94004..271cd01 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -331,12 +331,13 @@ static unsigned int get_conntrack_index(const struct tcphdr *tcph) I. Upper bound for valid data: seq <= sender.td_maxend II. Lower bound for valid data: seq + len >= sender.td_end - receiver.td_maxwin - III. Upper bound for valid ack: sack <= receiver.td_end - IV. Lower bound for valid ack: ack >= receiver.td_end - MAXACKWINDOW + III. Upper bound for valid (s)ack: sack <= receiver.td_end + IV. Lower bound for valid (s)ack: sack >= receiver.td_end - MAXACKWINDOW - where sack is the highest right edge of sack block found in the packet. + where sack is the highest right edge of sack block found in the packet + or ack in the case of packet without SACK option. - The upper bound limit for a valid ack is not ignored - + The upper bound limit for a valid (s)ack is not ignored - we doesn't have to deal with fragments. */ @@ -606,12 +607,12 @@ static bool tcp_in_window(const struct nf_conn *ct, before(seq, sender->td_maxend + 1), after(end, sender->td_end - receiver->td_maxwin - 1), before(sack, receiver->td_end + 1), - after(ack, receiver->td_end - MAXACKWINDOW(sender))); + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)); if (before(seq, sender->td_maxend + 1) && after(end, sender->td_end - receiver->td_maxwin - 1) && before(sack, receiver->td_end + 1) && - after(ack, receiver->td_end - MAXACKWINDOW(sender))) { + after(sack, receiver->td_end - MAXACKWINDOW(sender) - 1)) { /* * Take into account window scaling (RFC 1323). */ -- cgit v0.10.2 From aebb6a849cfe7d89bcacaaecc20a480dfc1180e7 Mon Sep 17 00:00:00 2001 From: Joonwoo Park Date: Mon, 30 Jun 2008 12:42:23 -0700 Subject: textsearch: fix Boyer-Moore text search bug The current logic has a bug which cannot find matching pattern, if the pattern is matched from the first character of target string. for example: pattern=abc, string=abcdefg pattern=a, string=abcdefg Searching algorithm should return 0 for those things. Signed-off-by: Joonwoo Park Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/lib/ts_bm.c b/lib/ts_bm.c index d90822c..4a7fce7 100644 --- a/lib/ts_bm.c +++ b/lib/ts_bm.c @@ -63,7 +63,7 @@ static unsigned int bm_find(struct ts_config *conf, struct ts_state *state) struct ts_bm *bm = ts_config_priv(conf); unsigned int i, text_len, consumed = state->offset; const u8 *text; - int shift = bm->patlen, bs; + int shift = bm->patlen - 1, bs; for (;;) { text_len = conf->get_next_block(consumed, &text, conf, state); -- cgit v0.10.2 From 15ea0ebc5b7305cc75189cb6b7924d0db5278e0c Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Jun 2008 16:19:52 -0400 Subject: hostap: don't report useless WDS frames by default DEBUG_EXTRA is reported to the kernel log by default, but DEBUG_EXTRA2 is not. Unrelated WDS frames pollute the log unnecessarily. Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 4fd7380..47884c3 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -551,7 +551,7 @@ hostap_rx_frame_wds(local_info_t *local, struct ieee80211_hdr_4addr *hdr, hdr->addr1[2] != 0xff || hdr->addr1[3] != 0xff || hdr->addr1[4] != 0xff || hdr->addr1[5] != 0xff)) { /* RA (or BSSID) is not ours - drop */ - PDEBUG(DEBUG_EXTRA, "%s: received WDS frame with " + PDEBUG(DEBUG_EXTRA2, "%s: received WDS frame with " "not own or broadcast %s=%s\n", local->dev->name, fc & IEEE80211_FCTL_FROMDS ? "RA" : "BSSID", -- cgit v0.10.2 From 1bcca3c463e4930cef9986b05165bb0b3eb46f63 Mon Sep 17 00:00:00 2001 From: Pavel Roskin Date: Fri, 27 Jun 2008 16:19:58 -0400 Subject: hostap: fix sparse warnings Rewrite AID calculation in handle_pspoll() to avoid truncating bits. Make hostap_80211_header_parse() static, don't export it. Avoid shadowing variables. Signed-off-by: Pavel Roskin Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/hostap/hostap_80211_rx.c b/drivers/net/wireless/hostap/hostap_80211_rx.c index 47884c3..020f450 100644 --- a/drivers/net/wireless/hostap/hostap_80211_rx.c +++ b/drivers/net/wireless/hostap/hostap_80211_rx.c @@ -64,7 +64,7 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, int hdrlen, phdrlen, head_need, tail_need; u16 fc; int prism_header, ret; - struct ieee80211_hdr_4addr *hdr; + struct ieee80211_hdr_4addr *fhdr; iface = netdev_priv(dev); local = iface->local; @@ -83,8 +83,8 @@ int prism2_rx_80211(struct net_device *dev, struct sk_buff *skb, phdrlen = 0; } - hdr = (struct ieee80211_hdr_4addr *) skb->data; - fc = le16_to_cpu(hdr->frame_ctl); + fhdr = (struct ieee80211_hdr_4addr *) skb->data; + fc = le16_to_cpu(fhdr->frame_ctl); if (type == PRISM2_RX_MGMT && (fc & IEEE80211_FCTL_VERS)) { printk(KERN_DEBUG "%s: dropped management frame with header " diff --git a/drivers/net/wireless/hostap/hostap_ap.c b/drivers/net/wireless/hostap/hostap_ap.c index 0acd958..ab981af 100644 --- a/drivers/net/wireless/hostap/hostap_ap.c +++ b/drivers/net/wireless/hostap/hostap_ap.c @@ -1930,7 +1930,7 @@ static void handle_pspoll(local_info_t *local, PDEBUG(DEBUG_PS, " PSPOLL and AID[15:14] not set\n"); return; } - aid &= ~BIT(15) & ~BIT(14); + aid &= ~(BIT(15) | BIT(14)); if (aid == 0 || aid > MAX_AID_TABLE_SIZE) { PDEBUG(DEBUG_PS, " invalid aid=%d\n", aid); return; diff --git a/drivers/net/wireless/hostap/hostap_cs.c b/drivers/net/wireless/hostap/hostap_cs.c index ed4317a1..80039a0 100644 --- a/drivers/net/wireless/hostap/hostap_cs.c +++ b/drivers/net/wireless/hostap/hostap_cs.c @@ -533,10 +533,10 @@ static void prism2_detach(struct pcmcia_device *link) do { last_fn = (fn); if ((last_ret = (ret)) != 0) goto cs_failed; } while (0) #define CFG_CHECK2(fn, retf) \ -do { int ret = (retf); \ -if (ret != 0) { \ - PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", ret); \ - cs_error(link, fn, ret); \ +do { int _ret = (retf); \ +if (_ret != 0) { \ + PDEBUG(DEBUG_EXTRA, "CardServices(" #fn ") returned %d\n", _ret); \ + cs_error(link, fn, _ret); \ goto next_entry; \ } \ } while (0) diff --git a/drivers/net/wireless/hostap/hostap_hw.c b/drivers/net/wireless/hostap/hostap_hw.c index cdf90c4..936f52e 100644 --- a/drivers/net/wireless/hostap/hostap_hw.c +++ b/drivers/net/wireless/hostap/hostap_hw.c @@ -2835,7 +2835,7 @@ static void hostap_passive_scan(unsigned long data) { local_info_t *local = (local_info_t *) data; struct net_device *dev = local->dev; - u16 channel; + u16 chan; if (local->passive_scan_interval <= 0) return; @@ -2872,11 +2872,11 @@ static void hostap_passive_scan(unsigned long data) printk(KERN_DEBUG "%s: passive scan channel %d\n", dev->name, local->passive_scan_channel); - channel = local->passive_scan_channel; + chan = local->passive_scan_channel; local->passive_scan_state = PASSIVE_SCAN_WAIT; local->passive_scan_timer.expires = jiffies + HZ / 10; } else { - channel = local->channel; + chan = local->channel; local->passive_scan_state = PASSIVE_SCAN_LISTEN; local->passive_scan_timer.expires = jiffies + local->passive_scan_interval * HZ; @@ -2884,9 +2884,9 @@ static void hostap_passive_scan(unsigned long data) if (hfa384x_cmd_callback(dev, HFA384X_CMDCODE_TEST | (HFA384X_TEST_CHANGE_CHANNEL << 8), - channel, NULL, 0)) + chan, NULL, 0)) printk(KERN_ERR "%s: passive scan channel set %d " - "failed\n", dev->name, channel); + "failed\n", dev->name, chan); add_timer(&local->passive_scan_timer); } diff --git a/drivers/net/wireless/hostap/hostap_main.c b/drivers/net/wireless/hostap/hostap_main.c index f7aec93..a38e85f 100644 --- a/drivers/net/wireless/hostap/hostap_main.c +++ b/drivers/net/wireless/hostap/hostap_main.c @@ -594,7 +594,8 @@ void hostap_dump_tx_header(const char *name, const struct hfa384x_tx_frame *tx) } -int hostap_80211_header_parse(const struct sk_buff *skb, unsigned char *haddr) +static int hostap_80211_header_parse(const struct sk_buff *skb, + unsigned char *haddr) { struct hostap_interface *iface = netdev_priv(skb->dev); local_info_t *local = iface->local; @@ -857,7 +858,6 @@ const struct header_ops hostap_80211_ops = { .rebuild = eth_rebuild_header, .cache = eth_header_cache, .cache_update = eth_header_cache_update, - .parse = hostap_80211_header_parse, }; EXPORT_SYMBOL(hostap_80211_ops); @@ -1150,7 +1150,6 @@ EXPORT_SYMBOL(hostap_set_roaming); EXPORT_SYMBOL(hostap_set_auth_algs); EXPORT_SYMBOL(hostap_dump_rx_header); EXPORT_SYMBOL(hostap_dump_tx_header); -EXPORT_SYMBOL(hostap_80211_header_parse); EXPORT_SYMBOL(hostap_80211_get_hdrlen); EXPORT_SYMBOL(hostap_get_stats); EXPORT_SYMBOL(hostap_setup_dev); -- cgit v0.10.2 From 23976efedd5ecb420b87455787c537eb4aed1981 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sat, 28 Jun 2008 02:50:13 +0300 Subject: mac80211: don't accept WEP keys other than WEP40 and WEP104 This patch makes mac80211 refuse a WEP key whose length is not WEP40 nor WEP104. Signed-off-by: Emmanuel Grumbach Signed-off-by: Tomas Winkler Signed-off-by: John W. Linville diff --git a/include/net/mac80211.h b/include/net/mac80211.h index dae3f9e..bcd1623 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -595,6 +595,15 @@ enum ieee80211_key_alg { ALG_CCMP, }; +/** + * enum ieee80211_key_len - key length + * @WEP40: WEP 5 byte long key + * @WEP104: WEP 13 byte long key + */ +enum ieee80211_key_len { + LEN_WEP40 = 5, + LEN_WEP104 = 13, +}; /** * enum ieee80211_key_flags - key flags diff --git a/net/mac80211/wext.c b/net/mac80211/wext.c index 6106cb7..e840421 100644 --- a/net/mac80211/wext.c +++ b/net/mac80211/wext.c @@ -95,6 +95,13 @@ static int ieee80211_set_encryption(struct net_device *dev, u8 *sta_addr, } } + if (alg == ALG_WEP && + key_len != LEN_WEP40 && key_len != LEN_WEP104) { + ieee80211_key_free(key); + err = -EINVAL; + goto out_unlock; + } + ieee80211_key_link(key, sdata, sta); if (set_tx_key || (!sta && !sdata->default_key && key)) -- cgit v0.10.2 From c0efd232929c2cd87238de2cccdaf4e845be5b0c Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Mon, 30 Jun 2008 15:04:50 -0300 Subject: V4L/DVB (8145a): USB Video Class driver This driver supports video input devices compliant with the USB Video Class specification. This means lots of currently manufactured webcams, and probably most of the future ones. Signed-off-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/MAINTAINERS b/MAINTAINERS index 8f0ec46..e6c06fa 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4314,6 +4314,14 @@ L: netdev@vger.kernel.org W: http://www.linux-usb.org/usbnet S: Maintained +USB VIDEO CLASS +P: Laurent Pinchart +M: laurent.pinchart@skynet.be +L: linx-uvc-devel@berlios.de +L: video4linux-list@redhat.com +W: http://linux-uvc.berlios.de +S: Maintained + USB W996[87]CF DRIVER P: Luca Risolia M: luca.risolia@studio.unibo.it diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 3b26fbd3..5ccb0ae 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -793,6 +793,14 @@ menuconfig V4L_USB_DRIVERS if V4L_USB_DRIVERS && USB +config USB_VIDEO_CLASS + tristate "USB Video Class (UVC)" + ---help--- + Support for the USB Video Class (UVC). Currently only video + input devices, such as webcams, are supported. + + For more information see: + source "drivers/media/video/pvrusb2/Kconfig" source "drivers/media/video/em28xx/Kconfig" diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index dff0d6a..ecbbfaa 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -136,6 +136,8 @@ obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_VIDEO_AU0828) += au0828/ +obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ + EXTRA_CFLAGS += -Idrivers/media/dvb/dvb-core EXTRA_CFLAGS += -Idrivers/media/dvb/frontends EXTRA_CFLAGS += -Idrivers/media/common/tuners diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile new file mode 100644 index 0000000..fb39bbf --- /dev/null +++ b/drivers/media/video/uvc/Makefile @@ -0,0 +1,3 @@ +uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \ + uvc_status.o uvc_isight.o +obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o diff --git a/drivers/media/video/uvc/uvc_ctrl.c b/drivers/media/video/uvc/uvc_ctrl.c new file mode 100644 index 0000000..f0ee46d --- /dev/null +++ b/drivers/media/video/uvc/uvc_ctrl.c @@ -0,0 +1,1256 @@ +/* + * uvc_ctrl.c -- USB Video Class driver - Controls + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +#define UVC_CTRL_NDATA 2 +#define UVC_CTRL_DATA_CURRENT 0 +#define UVC_CTRL_DATA_BACKUP 1 + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_control_info uvc_ctrls[] = { + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .index = 0, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .index = 1, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .index = 2, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .index = 3, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .index = 4, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .index = 8, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .index = 9, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .index = 10, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .index = 11, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .index = 1, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_GET_RES + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .index = 2, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .index = 3, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .index = 5, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .index = 17, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .index = 12, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .index = 6, + .size = 2, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .index = 13, + .size = 1, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_CUR + | UVC_CONTROL_GET_DEF | UVC_CONTROL_RESTORE, + }, + { + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .index = 7, + .size = 4, + .flags = UVC_CONTROL_SET_CUR | UVC_CONTROL_GET_RANGE + | UVC_CONTROL_RESTORE | UVC_CONTROL_AUTO_UPDATE, + }, +}; + +static struct uvc_menu_info power_line_frequency_controls[] = { + { 0, "Disabled" }, + { 1, "50 Hz" }, + { 2, "60 Hz" }, +}; + +static struct uvc_menu_info exposure_auto_controls[] = { + { 1, "Manual Mode" }, + { 2, "Auto Mode" }, + { 4, "Shutter Priority Mode" }, + { 8, "Aperture Priority Mode" }, +}; + +static struct uvc_control_mapping uvc_ctrl_mappings[] = { + { + .id = V4L2_CID_BRIGHTNESS, + .name = "Brightness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BRIGHTNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_CONTRAST, + .name = "Contrast", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_CONTRAST_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_HUE, + .name = "Hue", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_SATURATION, + .name = "Saturation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SATURATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_SHARPNESS, + .name = "Sharpness", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_SHARPNESS_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAMMA, + .name = "Gamma", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAMMA_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_BACKLIGHT_COMPENSATION, + .name = "Backlight Compensation", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_BACKLIGHT_COMPENSATION_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_GAIN, + .name = "Gain", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_GAIN_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_POWER_LINE_FREQUENCY, + .name = "Power Line Frequency", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_POWER_LINE_FREQUENCY_CONTROL, + .size = 2, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_ENUM, + .menu_info = power_line_frequency_controls, + .menu_count = ARRAY_SIZE(power_line_frequency_controls), + }, + { + .id = V4L2_CID_HUE_AUTO, + .name = "Hue, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_HUE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_AUTO, + .name = "Exposure, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_MODE_CONTROL, + .size = 4, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_MENU, + .data_type = UVC_CTRL_DATA_TYPE_BITMASK, + .menu_info = exposure_auto_controls, + .menu_count = ARRAY_SIZE(exposure_auto_controls), + }, + { + .id = V4L2_CID_EXPOSURE_AUTO_PRIORITY, + .name = "Exposure, Auto Priority", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_AE_PRIORITY_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_EXPOSURE_ABSOLUTE, + .name = "Exposure (Absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_EXPOSURE_TIME_ABSOLUTE_CONTROL, + .size = 32, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Temperature, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_WHITE_BALANCE_TEMPERATURE, + .name = "White Balance Temperature", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_TEMPERATURE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_AUTO_WHITE_BALANCE, + .name = "White Balance Component, Auto", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, + { + .id = V4L2_CID_BLUE_BALANCE, + .name = "White Balance Blue Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_RED_BALANCE, + .name = "White Balance Red Component", + .entity = UVC_GUID_UVC_PROCESSING, + .selector = PU_WHITE_BALANCE_COMPONENT_CONTROL, + .size = 16, + .offset = 16, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_SIGNED, + }, + { + .id = V4L2_CID_FOCUS_ABSOLUTE, + .name = "Focus (absolute)", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_ABSOLUTE_CONTROL, + .size = 16, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_INTEGER, + .data_type = UVC_CTRL_DATA_TYPE_UNSIGNED, + }, + { + .id = V4L2_CID_FOCUS_AUTO, + .name = "Focus, Auto", + .entity = UVC_GUID_UVC_CAMERA, + .selector = CT_FOCUS_AUTO_CONTROL, + .size = 1, + .offset = 0, + .v4l2_type = V4L2_CTRL_TYPE_BOOLEAN, + .data_type = UVC_CTRL_DATA_TYPE_BOOLEAN, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +static inline __u8 *uvc_ctrl_data(struct uvc_control *ctrl, int id) +{ + return ctrl->data + id * ctrl->info->size; +} + +static inline int uvc_get_bit(const __u8 *data, int bit) +{ + return (data[bit >> 3] >> (bit & 7)) & 1; +} + +/* Extract the bit string specified by mapping->offset and mapping->size + * from the little-endian data stored at 'data' and return the result as + * a signed 32bit integer. Sign extension will be performed if the mapping + * references a signed data type. + */ +static __s32 uvc_get_le_value(const __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __s32 value = 0; + __u8 mask; + + data += offset / 8; + offset &= 7; + mask = ((1LL << bits) - 1) << offset; + + for (; bits > 0; data++) { + __u8 byte = *data & mask; + value |= offset > 0 ? (byte >> offset) : (byte << (-offset)); + bits -= 8 - (offset > 0 ? offset : 0); + offset -= 8; + mask = (1 << bits) - 1; + } + + /* Sign-extend the value if needed */ + if (mapping->data_type == UVC_CTRL_DATA_TYPE_SIGNED) + value |= -(value & (1 << (mapping->size - 1))); + + return value; +} + +/* Set the bit string specified by mapping->offset and mapping->size + * in the little-endian data stored at 'data' to the value 'value'. + */ +static void uvc_set_le_value(__s32 value, __u8 *data, + struct uvc_control_mapping *mapping) +{ + int bits = mapping->size; + int offset = mapping->offset; + __u8 mask; + + data += offset / 8; + offset &= 7; + + for (; bits > 0; data++) { + mask = ((1LL << bits) - 1) << offset; + *data = (*data & ~mask) | ((value << offset) & mask); + value >>= offset ? offset : 8; + bits -= 8 - offset; + offset = 0; + } +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static const __u8 uvc_processing_guid[16] = UVC_GUID_UVC_PROCESSING; +static const __u8 uvc_camera_guid[16] = UVC_GUID_UVC_CAMERA; +static const __u8 uvc_media_transport_input_guid[16] = + UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT; + +static int uvc_entity_match_guid(struct uvc_entity *entity, __u8 guid[16]) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case ITT_CAMERA: + return memcmp(uvc_camera_guid, guid, 16) == 0; + + case ITT_MEDIA_TRANSPORT_INPUT: + return memcmp(uvc_media_transport_input_guid, guid, 16) == 0; + + case VC_PROCESSING_UNIT: + return memcmp(uvc_processing_guid, guid, 16) == 0; + + case VC_EXTENSION_UNIT: + return memcmp(entity->extension.guidExtensionCode, + guid, 16) == 0; + + default: + return 0; + } +} + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static void __uvc_find_control(struct uvc_entity *entity, __u32 v4l2_id, + struct uvc_control_mapping **mapping, struct uvc_control **control, + int next) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *map; + unsigned int i; + + if (entity == NULL) + return; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + list_for_each_entry(map, &ctrl->info->mappings, list) { + if ((map->id == v4l2_id) && !next) { + *control = ctrl; + *mapping = map; + return; + } + + if ((*mapping == NULL || (*mapping)->id > map->id) && + (map->id > v4l2_id) && next) { + *control = ctrl; + *mapping = map; + } + } + } +} + +struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping) +{ + struct uvc_control *ctrl = NULL; + struct uvc_entity *entity; + int next = v4l2_id & V4L2_CTRL_FLAG_NEXT_CTRL; + + *mapping = NULL; + + /* Mask the query flags. */ + v4l2_id &= V4L2_CTRL_ID_MASK; + + /* Find the control. */ + __uvc_find_control(video->processing, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + + list_for_each_entry(entity, &video->iterms, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + list_for_each_entry(entity, &video->extensions, chain) { + __uvc_find_control(entity, v4l2_id, mapping, &ctrl, next); + if (ctrl && !next) + return ctrl; + } + + if (ctrl == NULL && !next) + uvc_trace(UVC_TRACE_CONTROL, "Control 0x%08x not found.\n", + v4l2_id); + + return ctrl; +} + +int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + __u8 data[8]; + int ret; + + ctrl = uvc_find_control(video, v4l2_ctrl->id, &mapping); + if (ctrl == NULL) + return -EINVAL; + + v4l2_ctrl->id = mapping->id; + v4l2_ctrl->type = mapping->v4l2_type; + strncpy(v4l2_ctrl->name, mapping->name, sizeof v4l2_ctrl->name); + v4l2_ctrl->flags = 0; + + if (!(ctrl->info->flags & UVC_CONTROL_SET_CUR)) + v4l2_ctrl->flags |= V4L2_CTRL_FLAG_READ_ONLY; + + if (ctrl->info->flags & UVC_CONTROL_GET_DEF) { + if ((ret = uvc_query_ctrl(video->dev, GET_DEF, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->default_value = uvc_get_le_value(data, mapping); + } + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + v4l2_ctrl->minimum = 0; + v4l2_ctrl->maximum = mapping->menu_count - 1; + v4l2_ctrl->step = 1; + + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == v4l2_ctrl->default_value) { + v4l2_ctrl->default_value = i; + break; + } + } + + return 0; + } + + if (ctrl->info->flags & UVC_CONTROL_GET_MIN) { + if ((ret = uvc_query_ctrl(video->dev, GET_MIN, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->minimum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_MAX) { + if ((ret = uvc_query_ctrl(video->dev, GET_MAX, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->maximum = uvc_get_le_value(data, mapping); + } + if (ctrl->info->flags & UVC_CONTROL_GET_RES) { + if ((ret = uvc_query_ctrl(video->dev, GET_RES, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + &data, ctrl->info->size)) < 0) + return ret; + v4l2_ctrl->step = uvc_get_le_value(data, mapping); + } + + return 0; +} + + +/* -------------------------------------------------------------------------- + * Control transactions + * + * To make extended set operations as atomic as the hardware allows, controls + * are handled using begin/commit/rollback operations. + * + * At the beginning of a set request, uvc_ctrl_begin should be called to + * initialize the request. This function acquires the control lock. + * + * When setting a control, the new value is stored in the control data field + * at position UVC_CTRL_DATA_CURRENT. The control is then marked as dirty for + * later processing. If the UVC and V4L2 control sizes differ, the current + * value is loaded from the hardware before storing the new value in the data + * field. + * + * After processing all controls in the transaction, uvc_ctrl_commit or + * uvc_ctrl_rollback must be called to apply the pending changes to the + * hardware or revert them. When applying changes, all controls marked as + * dirty will be modified in the UVC device, and the dirty flag will be + * cleared. When reverting controls, the control data field + * UVC_CTRL_DATA_CURRENT is reverted to its previous value + * (UVC_CTRL_DATA_BACKUP) for all dirty controls. Both functions release the + * control lock. + */ +int uvc_ctrl_begin(struct uvc_video_device *video) +{ + return mutex_lock_interruptible(&video->ctrl_mutex) ? -ERESTARTSYS : 0; +} + +static int uvc_ctrl_commit_entity(struct uvc_device *dev, + struct uvc_entity *entity, int rollback) +{ + struct uvc_control *ctrl; + unsigned int i; + int ret; + + if (entity == NULL) + return 0; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL || !ctrl->dirty) + continue; + + if (!rollback) + ret = uvc_query_ctrl(dev, SET_CUR, ctrl->entity->id, + dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + else + ret = 0; + + if (rollback || ret < 0) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + ctrl->info->size); + + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + ctrl->loaded = 0; + + ctrl->dirty = 0; + + if (ret < 0) + return ret; + } + + return 0; +} + +int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback) +{ + struct uvc_entity *entity; + int ret = 0; + + /* Find the control. */ + ret = uvc_ctrl_commit_entity(video->dev, video->processing, rollback); + if (ret < 0) + goto done; + + list_for_each_entry(entity, &video->iterms, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + + list_for_each_entry(entity, &video->extensions, chain) { + ret = uvc_ctrl_commit_entity(video->dev, entity, rollback); + if (ret < 0) + goto done; + } + +done: + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + struct uvc_menu_info *menu; + unsigned int i; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) + return -EINVAL; + + if (!ctrl->loaded) { + ret = uvc_query_ctrl(video->dev, GET_CUR, ctrl->entity->id, + video->dev->intfnum, ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + xctrl->value = uvc_get_le_value( + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + menu = mapping->menu_info; + for (i = 0; i < mapping->menu_count; ++i, ++menu) { + if (menu->value == xctrl->value) { + xctrl->value = i; + break; + } + } + } + + return 0; +} + +int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl) +{ + struct uvc_control *ctrl; + struct uvc_control_mapping *mapping; + s32 value = xctrl->value; + int ret; + + ctrl = uvc_find_control(video, xctrl->id, &mapping); + if (ctrl == NULL || (ctrl->info->flags & UVC_CONTROL_SET_CUR) == 0) + return -EINVAL; + + if (mapping->v4l2_type == V4L2_CTRL_TYPE_MENU) { + if (value < 0 || value >= mapping->menu_count) + return -EINVAL; + value = mapping->menu_info[value].value; + } + + if (!ctrl->loaded && (ctrl->info->size * 8) != mapping->size) { + if ((ctrl->info->flags & UVC_CONTROL_GET_CUR) == 0) { + memset(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + 0, ctrl->info->size); + } else { + ret = uvc_query_ctrl(video->dev, GET_CUR, + ctrl->entity->id, video->dev->intfnum, + ctrl->info->selector, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + if (ret < 0) + return ret; + } + + if ((ctrl->info->flags & UVC_CONTROL_AUTO_UPDATE) == 0) + ctrl->loaded = 1; + } + + if (!ctrl->dirty) { + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + ctrl->info->size); + } + + uvc_set_le_value(value, + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), mapping); + + ctrl->dirty = 1; + ctrl->modified = 1; + return 0; +} + +/* -------------------------------------------------------------------------- + * Dynamic controls + */ + +int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *xctrl, int set) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + unsigned int i, found = 0; + __u8 *data; + int ret; + + /* Find the extension unit. */ + list_for_each_entry(entity, &video->extensions, chain) { + if (entity->id == xctrl->unit) + break; + } + + if (entity->id != xctrl->unit) { + uvc_trace(UVC_TRACE_CONTROL, "Extension unit %u not found.\n", + xctrl->unit); + return -EINVAL; + } + + /* Find the control. */ + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->info == NULL) + continue; + + if (ctrl->info->selector == xctrl->selector) { + found = 1; + break; + } + } + + if (!found) { + uvc_trace(UVC_TRACE_CONTROL, + "Control " UVC_GUID_FORMAT "/%u not found.\n", + UVC_GUID_ARGS(entity->extension.guidExtensionCode), + xctrl->selector); + return -EINVAL; + } + + /* Validate control data size. */ + if (ctrl->info->size != xctrl->size) + return -EINVAL; + + if ((set && !(ctrl->info->flags & UVC_CONTROL_SET_CUR)) || + (!set && !(ctrl->info->flags & UVC_CONTROL_GET_CUR))) + return -EINVAL; + + if (mutex_lock_interruptible(&video->ctrl_mutex)) + return -ERESTARTSYS; + + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + xctrl->size); + data = uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT); + + if (set && copy_from_user(data, xctrl->data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + + ret = uvc_query_ctrl(video->dev, set ? SET_CUR : GET_CUR, xctrl->unit, + video->dev->intfnum, xctrl->selector, data, + xctrl->size); + if (ret < 0) + goto out; + + if (!set && copy_to_user(xctrl->data, data, xctrl->size)) { + ret = -EFAULT; + goto out; + } + +out: + if (ret) + memcpy(uvc_ctrl_data(ctrl, UVC_CTRL_DATA_CURRENT), + uvc_ctrl_data(ctrl, UVC_CTRL_DATA_BACKUP), + xctrl->size); + + mutex_unlock(&video->ctrl_mutex); + return ret; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Restore control values after resume, skipping controls that haven't been + * changed. + * + * TODO + * - Don't restore modified controls that are back to their default value. + * - Handle restore order (Auto-Exposure Mode should be restored before + * Exposure Time). + */ +int uvc_ctrl_resume_device(struct uvc_device *dev) +{ + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + int ret; + + /* Walk the entities list and restore controls when possible. */ + list_for_each_entry(entity, &dev->entities, list) { + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + + if (ctrl->info == NULL || !ctrl->modified || + (ctrl->info->flags & UVC_CONTROL_RESTORE) == 0) + continue; + + printk(KERN_INFO "restoring control " UVC_GUID_FORMAT + "/%u/%u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->index, ctrl->info->selector); + ctrl->dirty = 1; + } + + ret = uvc_ctrl_commit_entity(dev, entity, 0); + if (ret < 0) + return ret; + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Control and mapping handling + */ + +static void uvc_ctrl_add_ctrl(struct uvc_device *dev, + struct uvc_control_info *info) +{ + struct uvc_entity *entity; + struct uvc_control *ctrl = NULL; + int ret, found = 0; + unsigned int i; + + list_for_each_entry(entity, &dev->entities, list) { + if (!uvc_entity_match_guid(entity, info->entity)) + continue; + + for (i = 0; i < entity->ncontrols; ++i) { + ctrl = &entity->controls[i]; + if (ctrl->index == info->index) { + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) + return; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + /* Check if the device control information and length match + * the user supplied information. + */ + __u32 flags; + __le16 size; + __u8 inf; + + if ((ret = uvc_query_ctrl(dev, GET_LEN, ctrl->entity->id, + dev->intfnum, info->selector, (__u8 *)&size, 2)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_LEN failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + if (info->size != le16_to_cpu(size)) { + uvc_trace(UVC_TRACE_CONTROL, "Control " UVC_GUID_FORMAT + "/%u size doesn't match user supplied " + "value.\n", UVC_GUID_ARGS(info->entity), + info->selector); + return; + } + + if ((ret = uvc_query_ctrl(dev, GET_INFO, ctrl->entity->id, + dev->intfnum, info->selector, &inf, 1)) < 0) { + uvc_trace(UVC_TRACE_CONTROL, "GET_INFO failed on " + "control " UVC_GUID_FORMAT "/%u (%d).\n", + UVC_GUID_ARGS(info->entity), info->selector, + ret); + return; + } + + flags = info->flags; + if (((flags & UVC_CONTROL_GET_CUR) && !(inf & (1 << 0))) || + ((flags & UVC_CONTROL_SET_CUR) && !(inf & (1 << 1)))) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u flags don't match " + "supported operations.\n", + UVC_GUID_ARGS(info->entity), info->selector); + return; + } + } + + ctrl->info = info; + ctrl->data = kmalloc(ctrl->info->size * UVC_CTRL_NDATA, GFP_KERNEL); + uvc_trace(UVC_TRACE_CONTROL, "Added control " UVC_GUID_FORMAT "/%u " + "to device %s entity %u\n", UVC_GUID_ARGS(ctrl->info->entity), + ctrl->info->selector, dev->udev->devpath, entity->id); +} + +/* + * Add an item to the UVC control information list, and instantiate a control + * structure for each device that supports the control. + */ +int uvc_ctrl_add_info(struct uvc_control_info *info) +{ + struct uvc_control_info *ctrl; + struct uvc_device *dev; + int ret = 0; + + /* Find matching controls by walking the devices, entities and + * controls list. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + + /* First check if the list contains a control matching the new one. + * Bail out if it does. + */ + list_for_each_entry(ctrl, &uvc_driver.controls, list) { + if (memcmp(ctrl->entity, info->entity, 16)) + continue; + + if (ctrl->selector == info->selector) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u is already defined.\n", + UVC_GUID_ARGS(info->entity), info->selector); + ret = -EEXIST; + goto end; + } + if (ctrl->index == info->index) { + uvc_trace(UVC_TRACE_CONTROL, "Control " + UVC_GUID_FORMAT "/%u would overwrite index " + "%d.\n", UVC_GUID_ARGS(info->entity), + info->selector, info->index); + ret = -EEXIST; + goto end; + } + } + + list_for_each_entry(dev, &uvc_driver.devices, list) + uvc_ctrl_add_ctrl(dev, info); + + INIT_LIST_HEAD(&info->mappings); + list_add_tail(&info->list, &uvc_driver.controls); +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping) +{ + struct uvc_control_info *info; + struct uvc_control_mapping *map; + int ret = -EINVAL; + + if (mapping->id & ~V4L2_CTRL_ID_MASK) { + uvc_trace(UVC_TRACE_CONTROL, "Can't add mapping '%s' with " + "invalid control id 0x%08x\n", mapping->name, + mapping->id); + return -EINVAL; + } + + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) { + if (memcmp(info->entity, mapping->entity, 16) || + info->selector != mapping->selector) + continue; + + if (info->size * 8 < mapping->size + mapping->offset) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' would " + "overflow control " UVC_GUID_FORMAT "/%u\n", + mapping->name, UVC_GUID_ARGS(info->entity), + info->selector); + ret = -EOVERFLOW; + goto end; + } + + /* Check if the list contains a mapping matching the new one. + * Bail out if it does. + */ + list_for_each_entry(map, &info->mappings, list) { + if (map->id == mapping->id) { + uvc_trace(UVC_TRACE_CONTROL, "Mapping '%s' is " + "already defined.\n", mapping->name); + ret = -EEXIST; + goto end; + } + } + + mapping->ctrl = info; + list_add_tail(&mapping->list, &info->mappings); + uvc_trace(UVC_TRACE_CONTROL, "Adding mapping %s to control " + UVC_GUID_FORMAT "/%u.\n", mapping->name, + UVC_GUID_ARGS(info->entity), info->selector); + + ret = 0; + break; + } +end: + mutex_unlock(&uvc_driver.ctrl_mutex); + return ret; +} + +/* + * Initialize device controls. + */ +int uvc_ctrl_init_device(struct uvc_device *dev) +{ + struct uvc_control_info *info; + struct uvc_control *ctrl; + struct uvc_entity *entity; + unsigned int i; + + /* Walk the entities list and instantiate controls */ + list_for_each_entry(entity, &dev->entities, list) { + unsigned int bControlSize = 0, ncontrols = 0; + __u8 *bmControls = NULL; + + if (UVC_ENTITY_TYPE(entity) == VC_EXTENSION_UNIT) { + bmControls = entity->extension.bmControls; + bControlSize = entity->extension.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == VC_PROCESSING_UNIT) { + bmControls = entity->processing.bmControls; + bControlSize = entity->processing.bControlSize; + } else if (UVC_ENTITY_TYPE(entity) == ITT_CAMERA) { + bmControls = entity->camera.bmControls; + bControlSize = entity->camera.bControlSize; + } + + for (i = 0; i < bControlSize; ++i) + ncontrols += hweight8(bmControls[i]); + + if (ncontrols == 0) + continue; + + entity->controls = kzalloc(ncontrols*sizeof *ctrl, GFP_KERNEL); + if (entity->controls == NULL) + return -ENOMEM; + + entity->ncontrols = ncontrols; + + ctrl = entity->controls; + for (i = 0; i < bControlSize * 8; ++i) { + if (uvc_get_bit(bmControls, i) == 0) + continue; + + ctrl->entity = entity; + ctrl->index = i; + ctrl++; + } + } + + /* Walk the controls info list and associate them with the device + * controls, then add the device to the global device list. This has + * to be done while holding the controls lock, to make sure + * uvc_ctrl_add_info() will not get called in-between. + */ + mutex_lock(&uvc_driver.ctrl_mutex); + list_for_each_entry(info, &uvc_driver.controls, list) + uvc_ctrl_add_ctrl(dev, info); + + list_add_tail(&dev->list, &uvc_driver.devices); + mutex_unlock(&uvc_driver.ctrl_mutex); + + return 0; +} + +/* + * Cleanup device controls. + */ +void uvc_ctrl_cleanup_device(struct uvc_device *dev) +{ + struct uvc_entity *entity; + unsigned int i; + + /* Remove the device from the global devices list */ + mutex_lock(&uvc_driver.ctrl_mutex); + if (dev->list.next != NULL) + list_del(&dev->list); + mutex_unlock(&uvc_driver.ctrl_mutex); + + list_for_each_entry(entity, &dev->entities, list) { + for (i = 0; i < entity->ncontrols; ++i) + kfree(entity->controls[i].data); + + kfree(entity->controls); + } +} + +void uvc_ctrl_init(void) +{ + struct uvc_control_info *ctrl = uvc_ctrls; + struct uvc_control_info *cend = ctrl + ARRAY_SIZE(uvc_ctrls); + struct uvc_control_mapping *mapping = uvc_ctrl_mappings; + struct uvc_control_mapping *mend = + mapping + ARRAY_SIZE(uvc_ctrl_mappings); + + for (; ctrl < cend; ++ctrl) + uvc_ctrl_add_info(ctrl); + + for (; mapping < mend; ++mapping) + uvc_ctrl_add_mapping(mapping); +} diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c new file mode 100644 index 0000000..60ced58 --- /dev/null +++ b/drivers/media/video/uvc/uvc_driver.c @@ -0,0 +1,1955 @@ +/* + * uvc_driver.c -- USB Video Class driver + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +/* + * This driver aims to support video input devices compliant with the 'USB + * Video Class' specification. + * + * The driver doesn't support the deprecated v4l1 interface. It implements the + * mmap capture method only, and doesn't do any image format conversion in + * software. If your user-space application doesn't support YUYV or MJPEG, fix + * it :-). Please note that the MJPEG data have been stripped from their + * Huffman tables (DHT marker), you will need to add it back if your JPEG + * codec can't handle MJPEG data. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +#define DRIVER_AUTHOR "Laurent Pinchart " +#define DRIVER_DESC "USB Video Class driver" +#ifndef DRIVER_VERSION +#define DRIVER_VERSION "v0.1.0" +#endif + +static unsigned int uvc_quirks_param; +unsigned int uvc_trace_param; + +/* ------------------------------------------------------------------------ + * Control, formats, ... + */ + +static struct uvc_format_desc uvc_fmts[] = { + { + .name = "YUV 4:2:2 (YUYV)", + .guid = UVC_GUID_FORMAT_YUY2, + .fcc = V4L2_PIX_FMT_YUYV, + }, + { + .name = "YUV 4:2:0 (NV12)", + .guid = UVC_GUID_FORMAT_NV12, + .fcc = V4L2_PIX_FMT_NV12, + }, + { + .name = "MJPEG", + .guid = UVC_GUID_FORMAT_MJPEG, + .fcc = V4L2_PIX_FMT_MJPEG, + }, + { + .name = "YVU 4:2:0 (YV12)", + .guid = UVC_GUID_FORMAT_YV12, + .fcc = V4L2_PIX_FMT_YVU420, + }, + { + .name = "YUV 4:2:0 (I420)", + .guid = UVC_GUID_FORMAT_I420, + .fcc = V4L2_PIX_FMT_YUV420, + }, + { + .name = "YUV 4:2:2 (UYVY)", + .guid = UVC_GUID_FORMAT_UYVY, + .fcc = V4L2_PIX_FMT_UYVY, + }, + { + .name = "Greyscale", + .guid = UVC_GUID_FORMAT_Y800, + .fcc = V4L2_PIX_FMT_GREY, + }, + { + .name = "RGB Bayer", + .guid = UVC_GUID_FORMAT_BY8, + .fcc = V4L2_PIX_FMT_SBGGR8, + }, +}; + +/* ------------------------------------------------------------------------ + * Utility functions + */ + +struct usb_host_endpoint *uvc_find_endpoint(struct usb_host_interface *alts, + __u8 epaddr) +{ + struct usb_host_endpoint *ep; + unsigned int i; + + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + ep = &alts->endpoint[i]; + if (ep->desc.bEndpointAddress == epaddr) + return ep; + } + + return NULL; +} + +static struct uvc_format_desc *uvc_format_by_guid(const __u8 guid[16]) +{ + unsigned int len = ARRAY_SIZE(uvc_fmts); + unsigned int i; + + for (i = 0; i < len; ++i) { + if (memcmp(guid, uvc_fmts[i].guid, 16) == 0) + return &uvc_fmts[i]; + } + + return NULL; +} + +static __u32 uvc_colorspace(const __u8 primaries) +{ + static const __u8 colorprimaries[] = { + 0, + V4L2_COLORSPACE_SRGB, + V4L2_COLORSPACE_470_SYSTEM_M, + V4L2_COLORSPACE_470_SYSTEM_BG, + V4L2_COLORSPACE_SMPTE170M, + V4L2_COLORSPACE_SMPTE240M, + }; + + if (primaries < ARRAY_SIZE(colorprimaries)) + return colorprimaries[primaries]; + + return 0; +} + +/* Simplify a fraction using a simple continued fraction decomposition. The + * idea here is to convert fractions such as 333333/10000000 to 1/30 using + * 32 bit arithmetic only. The algorithm is not perfect and relies upon two + * arbitrary parameters to remove non-significative terms from the simple + * continued fraction decomposition. Using 8 and 333 for n_terms and threshold + * respectively seems to give nice results. + */ +void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold) +{ + uint32_t *an; + uint32_t x, y, r; + unsigned int i, n; + + an = kmalloc(n_terms * sizeof *an, GFP_KERNEL); + if (an == NULL) + return; + + /* Convert the fraction to a simple continued fraction. See + * http://mathforum.org/dr.math/faq/faq.fractions.html + * Stop if the current term is bigger than or equal to the given + * threshold. + */ + x = *numerator; + y = *denominator; + + for (n = 0; n < n_terms && y != 0; ++n) { + an[n] = x / y; + if (an[n] >= threshold) { + if (n < 2) + n++; + break; + } + + r = x - an[n] * y; + x = y; + y = r; + } + + /* Expand the simple continued fraction back to an integer fraction. */ + x = 0; + y = 1; + + for (i = n; i > 0; --i) { + r = y; + y = an[i-1] * y + x; + x = r; + } + + *numerator = y; + *denominator = x; + kfree(an); +} + +/* Convert a fraction to a frame interval in 100ns multiples. The idea here is + * to compute numerator / denominator * 10000000 using 32 bit fixed point + * arithmetic only. + */ +uint32_t uvc_fraction_to_interval(uint32_t numerator, uint32_t denominator) +{ + uint32_t multiplier; + + /* Saturate the result if the operation would overflow. */ + if (denominator == 0 || + numerator/denominator >= ((uint32_t)-1)/10000000) + return (uint32_t)-1; + + /* Divide both the denominator and the multiplier by two until + * numerator * multiplier doesn't overflow. If anyone knows a better + * algorithm please let me know. + */ + multiplier = 10000000; + while (numerator > ((uint32_t)-1)/multiplier) { + multiplier /= 2; + denominator /= 2; + } + + return denominator ? numerator * multiplier / denominator : 0; +} + +/* ------------------------------------------------------------------------ + * Terminal and unit management + */ + +static struct uvc_entity *uvc_entity_by_id(struct uvc_device *dev, int id) +{ + struct uvc_entity *entity; + + list_for_each_entry(entity, &dev->entities, list) { + if (entity->id == id) + return entity; + } + + return NULL; +} + +static struct uvc_entity *uvc_entity_by_reference(struct uvc_device *dev, + int id, struct uvc_entity *entity) +{ + unsigned int i; + + if (entity == NULL) + entity = list_entry(&dev->entities, struct uvc_entity, list); + + list_for_each_entry_continue(entity, &dev->entities, list) { + switch (UVC_ENTITY_TYPE(entity)) { + case TT_STREAMING: + if (entity->output.bSourceID == id) + return entity; + break; + + case VC_PROCESSING_UNIT: + if (entity->processing.bSourceID == id) + return entity; + break; + + case VC_SELECTOR_UNIT: + for (i = 0; i < entity->selector.bNrInPins; ++i) + if (entity->selector.baSourceID[i] == id) + return entity; + break; + + case VC_EXTENSION_UNIT: + for (i = 0; i < entity->extension.bNrInPins; ++i) + if (entity->extension.baSourceID[i] == id) + return entity; + break; + } + } + + return NULL; +} + +/* ------------------------------------------------------------------------ + * Descriptors handling + */ + +static int uvc_parse_format(struct uvc_device *dev, + struct uvc_streaming *streaming, struct uvc_format *format, + __u32 **intervals, unsigned char *buffer, int buflen) +{ + struct usb_interface *intf = streaming->intf; + struct usb_host_interface *alts = intf->cur_altsetting; + struct uvc_format_desc *fmtdesc; + struct uvc_frame *frame; + const unsigned char *start = buffer; + unsigned int interval; + unsigned int i, n; + __u8 ftype; + + format->type = buffer[2]; + format->index = buffer[3]; + + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_FRAME_BASED: + if (buflen < 27) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Find the format descriptor from its GUID. */ + fmtdesc = uvc_format_by_guid(&buffer[5]); + + if (fmtdesc != NULL) { + strncpy(format->name, fmtdesc->name, + sizeof format->name); + format->fcc = fmtdesc->fcc; + } else { + uvc_printk(KERN_INFO, "Unknown video format " + UVC_GUID_FORMAT "\n", + UVC_GUID_ARGS(&buffer[5])); + snprintf(format->name, sizeof format->name, + UVC_GUID_FORMAT, UVC_GUID_ARGS(&buffer[5])); + format->fcc = 0; + } + + format->bpp = buffer[21]; + if (buffer[2] == VS_FORMAT_UNCOMPRESSED) { + ftype = VS_FRAME_UNCOMPRESSED; + } else { + ftype = VS_FRAME_FRAME_BASED; + if (buffer[27]) + format->flags = UVC_FMT_FLAG_COMPRESSED; + } + break; + + case VS_FORMAT_MJPEG: + if (buflen < 11) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + strncpy(format->name, "MJPEG", sizeof format->name); + format->fcc = V4L2_PIX_FMT_MJPEG; + format->flags = UVC_FMT_FLAG_COMPRESSED; + format->bpp = 0; + ftype = VS_FRAME_MJPEG; + break; + + case VS_FORMAT_DV: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + switch (buffer[8] & 0x7f) { + case 0: + strncpy(format->name, "SD-DV", sizeof format->name); + break; + case 1: + strncpy(format->name, "SDL-DV", sizeof format->name); + break; + case 2: + strncpy(format->name, "HD-DV", sizeof format->name); + break; + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d: unknown DV format %u\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, buffer[8]); + return -EINVAL; + } + + strncat(format->name, buffer[8] & (1 << 7) ? " 60Hz" : " 50Hz", + sizeof format->name); + + format->fcc = V4L2_PIX_FMT_DV; + format->flags = UVC_FMT_FLAG_COMPRESSED | UVC_FMT_FLAG_STREAM; + format->bpp = 0; + ftype = 0; + + /* Create a dummy frame descriptor. */ + frame = &format->frame[0]; + memset(&format->frame[0], 0, sizeof format->frame[0]); + frame->bFrameIntervalType = 1; + frame->dwDefaultFrameInterval = 1; + frame->dwFrameInterval = *intervals; + *(*intervals)++ = 1; + format->nframes = 1; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + /* Not supported yet. */ + default: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d unsupported format %u\n", + dev->udev->devnum, alts->desc.bInterfaceNumber, + buffer[2]); + return -EINVAL; + } + + uvc_trace(UVC_TRACE_DESCR, "Found format %s.\n", format->name); + + buflen -= buffer[0]; + buffer += buffer[0]; + + /* Parse the frame descriptors. Only uncompressed, MJPEG and frame + * based formats have frame descriptors. + */ + while (buflen > 2 && buffer[2] == ftype) { + frame = &format->frame[format->nframes]; + + if (ftype != VS_FRAME_FRAME_BASED) + n = buflen > 25 ? buffer[25] : 0; + else + n = buflen > 21 ? buffer[21] : 0; + + n = n ? n : 3; + + if (buflen < 26 + 4*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d FRAME error\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + frame->bFrameIndex = buffer[3]; + frame->bmCapabilities = buffer[4]; + frame->wWidth = le16_to_cpup((__le16 *)&buffer[5]); + frame->wHeight = le16_to_cpup((__le16 *)&buffer[7]); + frame->dwMinBitRate = le32_to_cpup((__le32 *)&buffer[9]); + frame->dwMaxBitRate = le32_to_cpup((__le32 *)&buffer[13]); + if (ftype != VS_FRAME_FRAME_BASED) { + frame->dwMaxVideoFrameBufferSize = + le32_to_cpup((__le32 *)&buffer[17]); + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[21]); + frame->bFrameIntervalType = buffer[25]; + } else { + frame->dwMaxVideoFrameBufferSize = 0; + frame->dwDefaultFrameInterval = + le32_to_cpup((__le32 *)&buffer[17]); + frame->bFrameIntervalType = buffer[21]; + } + frame->dwFrameInterval = *intervals; + + /* Several UVC chipsets screw up dwMaxVideoFrameBufferSize + * completely. Observed behaviours range from setting the + * value to 1.1x the actual frame size of hardwiring the + * 16 low bits to 0. This results in a higher than necessary + * memory usage as well as a wrong image size information. For + * uncompressed formats this can be fixed by computing the + * value from the frame size. + */ + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED)) + frame->dwMaxVideoFrameBufferSize = format->bpp + * frame->wWidth * frame->wHeight / 8; + + /* Some bogus devices report dwMinFrameInterval equal to + * dwMaxFrameInterval and have dwFrameIntervalStep set to + * zero. Setting all null intervals to 1 fixes the problem and + * some other divisions by zero which could happen. + */ + for (i = 0; i < n; ++i) { + interval = le32_to_cpup((__le32 *)&buffer[26+4*i]); + *(*intervals)++ = interval ? interval : 1; + } + + /* Make sure that the default frame interval stays between + * the boundaries. + */ + n -= frame->bFrameIntervalType ? 1 : 2; + frame->dwDefaultFrameInterval = + min(frame->dwFrameInterval[n], + max(frame->dwFrameInterval[0], + frame->dwDefaultFrameInterval)); + + uvc_trace(UVC_TRACE_DESCR, "- %ux%u (%u.%u fps)\n", + frame->wWidth, frame->wHeight, + 10000000/frame->dwDefaultFrameInterval, + (100000000/frame->dwDefaultFrameInterval)%10); + + format->nframes++; + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_STILL_IMAGE_FRAME) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen > 2 && buffer[2] == VS_COLORFORMAT) { + if (buflen < 6) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming" + "interface %d COLORFORMAT error\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + format->colorspace = uvc_colorspace(buffer[3]); + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + return buffer - start; +} + +static int uvc_parse_streaming(struct uvc_device *dev, + struct usb_interface *intf) +{ + struct uvc_streaming *streaming = NULL; + struct uvc_format *format; + struct uvc_frame *frame; + struct usb_host_interface *alts = &intf->altsetting[0]; + unsigned char *_buffer, *buffer = alts->extra; + int _buflen, buflen = alts->extralen; + unsigned int nformats = 0, nframes = 0, nintervals = 0; + unsigned int size, i, n, p; + __u32 *interval; + __u16 psize; + int ret = -EINVAL; + + if (intf->cur_altsetting->desc.bInterfaceSubClass + != SC_VIDEOSTREAMING) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d isn't a " + "video streaming interface\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + if (usb_driver_claim_interface(&uvc_driver.driver, intf, dev)) { + uvc_trace(UVC_TRACE_DESCR, "device %d interface %d is already " + "claimed\n", dev->udev->devnum, + intf->altsetting[0].desc.bInterfaceNumber); + return -EINVAL; + } + + streaming = kzalloc(sizeof *streaming, GFP_KERNEL); + if (streaming == NULL) { + usb_driver_release_interface(&uvc_driver.driver, intf); + return -EINVAL; + } + + mutex_init(&streaming->mutex); + streaming->intf = usb_get_intf(intf); + streaming->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + + /* The Pico iMage webcam has its class-specific interface descriptors + * after the endpoint descriptors. + */ + if (buflen == 0) { + for (i = 0; i < alts->desc.bNumEndpoints; ++i) { + struct usb_host_endpoint *ep = &alts->endpoint[i]; + + if (ep->extralen == 0) + continue; + + if (ep->extralen > 2 && + ep->extra[1] == USB_DT_CS_INTERFACE) { + uvc_trace(UVC_TRACE_DESCR, "trying extra data " + "from endpoint %u.\n", i); + buffer = alts->endpoint[i].extra; + buflen = alts->endpoint[i].extralen; + break; + } + } + } + + /* Skip the standard interface descriptors. */ + while (buflen > 2 && buffer[1] != USB_DT_CS_INTERFACE) { + buflen -= buffer[0]; + buffer += buffer[0]; + } + + if (buflen <= 2) { + uvc_trace(UVC_TRACE_DESCR, "no class-specific streaming " + "interface descriptors found.\n"); + goto error; + } + + /* Parse the header descriptor. */ + if (buffer[2] == VS_OUTPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d OUTPUT HEADER descriptor is not supported.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } else if (buffer[2] == VS_INPUT_HEADER) { + p = buflen >= 5 ? buffer[3] : 0; + n = buflen >= 12 ? buffer[12] : 0; + + if (buflen < 13 + p*n || buffer[2] != VS_INPUT_HEADER) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d INPUT HEADER descriptor is " + "invalid.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + streaming->header.bNumFormats = p; + streaming->header.bEndpointAddress = buffer[6]; + streaming->header.bmInfo = buffer[7]; + streaming->header.bTerminalLink = buffer[8]; + streaming->header.bStillCaptureMethod = buffer[9]; + streaming->header.bTriggerSupport = buffer[10]; + streaming->header.bTriggerUsage = buffer[11]; + streaming->header.bControlSize = n; + + streaming->header.bmaControls = kmalloc(p*n, GFP_KERNEL); + if (streaming->header.bmaControls == NULL) { + ret = -ENOMEM; + goto error; + } + + memcpy(streaming->header.bmaControls, &buffer[13], p*n); + } else { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d HEADER descriptor not found.\n", dev->udev->devnum, + alts->desc.bInterfaceNumber); + goto error; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + + _buffer = buffer; + _buflen = buflen; + + /* Count the format and frame descriptors. */ + while (_buflen > 2) { + switch (_buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_FRAME_BASED: + nformats++; + break; + + case VS_FORMAT_DV: + /* DV format has no frame descriptor. We will create a + * dummy frame descriptor with a dummy frame interval. + */ + nformats++; + nframes++; + nintervals++; + break; + + case VS_FORMAT_MPEG2TS: + case VS_FORMAT_STREAM_BASED: + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming " + "interface %d FORMAT %u is not supported.\n", + dev->udev->devnum, + alts->desc.bInterfaceNumber, _buffer[2]); + break; + + case VS_FRAME_UNCOMPRESSED: + case VS_FRAME_MJPEG: + nframes++; + if (_buflen > 25) + nintervals += _buffer[25] ? _buffer[25] : 3; + break; + + case VS_FRAME_FRAME_BASED: + nframes++; + if (_buflen > 21) + nintervals += _buffer[21] ? _buffer[21] : 3; + break; + } + + _buflen -= _buffer[0]; + _buffer += _buffer[0]; + } + + if (nformats == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videostreaming interface " + "%d has no supported formats defined.\n", + dev->udev->devnum, alts->desc.bInterfaceNumber); + goto error; + } + + size = nformats * sizeof *format + nframes * sizeof *frame + + nintervals * sizeof *interval; + format = kzalloc(size, GFP_KERNEL); + if (format == NULL) { + ret = -ENOMEM; + goto error; + } + + frame = (struct uvc_frame *)&format[nformats]; + interval = (__u32 *)&frame[nframes]; + + streaming->format = format; + streaming->nformats = nformats; + + /* Parse the format descriptors. */ + while (buflen > 2) { + switch (buffer[2]) { + case VS_FORMAT_UNCOMPRESSED: + case VS_FORMAT_MJPEG: + case VS_FORMAT_DV: + case VS_FORMAT_FRAME_BASED: + format->frame = frame; + ret = uvc_parse_format(dev, streaming, format, + &interval, buffer, buflen); + if (ret < 0) + goto error; + + frame += format->nframes; + format++; + + buflen -= ret; + buffer += ret; + continue; + + default: + break; + } + + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Parse the alternate settings to find the maximum bandwidth. */ + for (i = 0; i < intf->num_altsetting; ++i) { + struct usb_host_endpoint *ep; + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize > streaming->maxpsize) + streaming->maxpsize = psize; + } + + list_add_tail(&streaming->list, &dev->streaming); + return 0; + +error: + usb_driver_release_interface(&uvc_driver.driver, intf); + usb_put_intf(intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + return ret; +} + +/* Parse vendor-specific extensions. */ +static int uvc_parse_vendor_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + struct uvc_entity *unit; + unsigned int n, p; + int handled = 0; + + switch (le16_to_cpu(dev->udev->descriptor.idVendor)) { + case 0x046d: /* Logitech */ + if (buffer[1] != 0x41 || buffer[2] != 0x01) + break; + + /* Logitech implements several vendor specific functions + * through vendor specific extension units (LXU). + * + * The LXU descriptors are similar to XU descriptors + * (see "USB Device Video Class for Video Devices", section + * 3.7.2.6 "Extension Unit Descriptor") with the following + * differences: + * + * ---------------------------------------------------------- + * 0 bLength 1 Number + * Size of this descriptor, in bytes: 24+p+n*2 + * ---------------------------------------------------------- + * 23+p+n bmControlsType N Bitmap + * Individual bits in the set are defined: + * 0: Absolute + * 1: Relative + * + * This bitset is mapped exactly the same as bmControls. + * ---------------------------------------------------------- + * 23+p+n*2 bReserved 1 Boolean + * ---------------------------------------------------------- + * 24+p+n*2 iExtension 1 Index + * Index of a string descriptor that describes this + * extension unit. + * ---------------------------------------------------------- + */ + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 25 + p ? buffer[22+p] : 0; + + if (buflen < 25 + p + 2*n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + break; + } + + unit = kzalloc(sizeof *unit + p + 2*n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = VC_EXTENSION_UNIT; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + unit->extension.bmControlsType = (__u8 *)unit + sizeof *unit + + p + n; + memcpy(unit->extension.bmControls, &buffer[23+p], 2*n); + + if (buffer[24+p+2*n] != 0) + usb_string(udev, buffer[24+p+2*n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + handled = 1; + break; + } + + return handled; +} + +static int uvc_parse_standard_control(struct uvc_device *dev, + const unsigned char *buffer, int buflen) +{ + struct usb_device *udev = dev->udev; + struct uvc_entity *unit, *term; + struct usb_interface *intf; + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned int i, n, p, len; + __u16 type; + + switch (buffer[2]) { + case VC_HEADER: + n = buflen >= 12 ? buffer[11] : 0; + + if (buflen < 12 || buflen < 12 + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d HEADER error\n", udev->devnum, + alts->desc.bInterfaceNumber); + return -EINVAL; + } + + dev->uvc_version = le16_to_cpup((__le16 *)&buffer[3]); + dev->clock_frequency = le32_to_cpup((__le32 *)&buffer[7]); + + /* Parse all USB Video Streaming interfaces. */ + for (i = 0; i < n; ++i) { + intf = usb_ifnum_to_if(udev, buffer[12+i]); + if (intf == NULL) { + uvc_trace(UVC_TRACE_DESCR, "device %d " + "interface %d doesn't exists\n", + udev->devnum, i); + continue; + } + + uvc_parse_streaming(dev, intf); + } + break; + + case VC_INPUT_TERMINAL: + if (buflen < 8) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, + buffer[3], type); + return 0; + } + + n = 0; + p = 0; + len = 8; + + if (type == ITT_CAMERA) { + n = buflen >= 15 ? buffer[14] : 0; + len = 15; + + } else if (type == ITT_MEDIA_TRANSPORT_INPUT) { + n = buflen >= 9 ? buffer[8] : 0; + p = buflen >= 10 + n ? buffer[9+n] : 0; + len = 10; + } + + if (buflen < len + n + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d INPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + term = kzalloc(sizeof *term + n + p, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_INPUT; + + if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) { + term->camera.bControlSize = n; + term->camera.bmControls = (__u8 *)term + sizeof *term; + term->camera.wObjectiveFocalLengthMin = + le16_to_cpup((__le16 *)&buffer[8]); + term->camera.wObjectiveFocalLengthMax = + le16_to_cpup((__le16 *)&buffer[10]); + term->camera.wOcularFocalLength = + le16_to_cpup((__le16 *)&buffer[12]); + memcpy(term->camera.bmControls, &buffer[15], n); + } else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) { + term->media.bControlSize = n; + term->media.bmControls = (__u8 *)term + sizeof *term; + term->media.bTransportModeSize = p; + term->media.bmTransportModes = (__u8 *)term + + sizeof *term + n; + memcpy(term->media.bmControls, &buffer[9], n); + memcpy(term->media.bmTransportModes, &buffer[10+n], p); + } + + if (buffer[7] != 0) + usb_string(udev, buffer[7], term->name, + sizeof term->name); + else if (UVC_ENTITY_TYPE(term) == ITT_CAMERA) + sprintf(term->name, "Camera %u", buffer[3]); + else if (UVC_ENTITY_TYPE(term) == ITT_MEDIA_TRANSPORT_INPUT) + sprintf(term->name, "Media %u", buffer[3]); + else + sprintf(term->name, "Input %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_OUTPUT_TERMINAL: + if (buflen < 9) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + /* Make sure the terminal type MSB is not null, otherwise it + * could be confused with a unit. + */ + type = le16_to_cpup((__le16 *)&buffer[4]); + if ((type & 0xff00) == 0) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d OUTPUT_TERMINAL %d has invalid " + "type 0x%04x, skipping\n", udev->devnum, + alts->desc.bInterfaceNumber, buffer[3], type); + return 0; + } + + term = kzalloc(sizeof *term, GFP_KERNEL); + if (term == NULL) + return -ENOMEM; + + term->id = buffer[3]; + term->type = type | UVC_TERM_OUTPUT; + term->output.bSourceID = buffer[7]; + + if (buffer[8] != 0) + usb_string(udev, buffer[8], term->name, + sizeof term->name); + else + sprintf(term->name, "Output %u", buffer[3]); + + list_add_tail(&term->list, &dev->entities); + break; + + case VC_SELECTOR_UNIT: + p = buflen >= 5 ? buffer[4] : 0; + + if (buflen < 5 || buflen < 6 + p) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d SELECTOR_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->selector.bNrInPins = buffer[4]; + unit->selector.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->selector.baSourceID, &buffer[5], p); + + if (buffer[5+p] != 0) + usb_string(udev, buffer[5+p], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Selector %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_PROCESSING_UNIT: + n = buflen >= 8 ? buffer[7] : 0; + p = dev->uvc_version >= 0x0110 ? 10 : 9; + + if (buflen < p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d PROCESSING_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + unit->processing.bSourceID = buffer[4]; + unit->processing.wMaxMultiplier = + le16_to_cpup((__le16 *)&buffer[5]); + unit->processing.bControlSize = buffer[7]; + unit->processing.bmControls = (__u8 *)unit + sizeof *unit; + memcpy(unit->processing.bmControls, &buffer[8], n); + if (dev->uvc_version >= 0x0110) + unit->processing.bmVideoStandards = buffer[9+n]; + + if (buffer[8+n] != 0) + usb_string(udev, buffer[8+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Processing %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + case VC_EXTENSION_UNIT: + p = buflen >= 22 ? buffer[21] : 0; + n = buflen >= 24 + p ? buffer[22+p] : 0; + + if (buflen < 24 + p + n) { + uvc_trace(UVC_TRACE_DESCR, "device %d videocontrol " + "interface %d EXTENSION_UNIT error\n", + udev->devnum, alts->desc.bInterfaceNumber); + return -EINVAL; + } + + unit = kzalloc(sizeof *unit + p + n, GFP_KERNEL); + if (unit == NULL) + return -ENOMEM; + + unit->id = buffer[3]; + unit->type = buffer[2]; + memcpy(unit->extension.guidExtensionCode, &buffer[4], 16); + unit->extension.bNumControls = buffer[20]; + unit->extension.bNrInPins = + le16_to_cpup((__le16 *)&buffer[21]); + unit->extension.baSourceID = (__u8 *)unit + sizeof *unit; + memcpy(unit->extension.baSourceID, &buffer[22], p); + unit->extension.bControlSize = buffer[22+p]; + unit->extension.bmControls = (__u8 *)unit + sizeof *unit + p; + memcpy(unit->extension.bmControls, &buffer[23+p], n); + + if (buffer[23+p+n] != 0) + usb_string(udev, buffer[23+p+n], unit->name, + sizeof unit->name); + else + sprintf(unit->name, "Extension %u", buffer[3]); + + list_add_tail(&unit->list, &dev->entities); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Found an unknown CS_INTERFACE " + "descriptor (%u)\n", buffer[2]); + break; + } + + return 0; +} + +static int uvc_parse_control(struct uvc_device *dev) +{ + struct usb_host_interface *alts = dev->intf->cur_altsetting; + unsigned char *buffer = alts->extra; + int buflen = alts->extralen; + int ret; + + /* Parse the default alternate setting only, as the UVC specification + * defines a single alternate setting, the default alternate setting + * zero. + */ + + while (buflen > 2) { + if (uvc_parse_vendor_control(dev, buffer, buflen) || + buffer[1] != USB_DT_CS_INTERFACE) + goto next_descriptor; + + if ((ret = uvc_parse_standard_control(dev, buffer, buflen)) < 0) + return ret; + +next_descriptor: + buflen -= buffer[0]; + buffer += buffer[0]; + } + + /* Check if the optional status endpoint is present. */ + if (alts->desc.bNumEndpoints == 1) { + struct usb_host_endpoint *ep = &alts->endpoint[0]; + struct usb_endpoint_descriptor *desc = &ep->desc; + + if (usb_endpoint_is_int_in(desc) && + le16_to_cpu(desc->wMaxPacketSize) >= 8 && + desc->bInterval != 0) { + uvc_trace(UVC_TRACE_DESCR, "Found a Status endpoint " + "(addr %02x).\n", desc->bEndpointAddress); + dev->int_ep = ep; + } + } + + return 0; +} + +/* ------------------------------------------------------------------------ + * USB probe and disconnect + */ + +/* + * Unregister the video devices. + */ +static void uvc_unregister_video(struct uvc_device *dev) +{ + if (dev->video.vdev) { + if (dev->video.vdev->minor == -1) + video_device_release(dev->video.vdev); + else + video_unregister_device(dev->video.vdev); + dev->video.vdev = NULL; + } +} + +/* + * Scan the UVC descriptors to locate a chain starting at an Output Terminal + * and containing the following units: + * + * - a USB Streaming Output Terminal + * - zero or one Processing Unit + * - zero, one or mode single-input Selector Units + * - zero or one multiple-input Selector Units, provided all inputs are + * connected to input terminals + * - zero, one or mode single-input Extension Units + * - one Camera Input Terminal, or one or more External terminals. + * + * A side forward scan is made on each detected entity to check for additional + * extension units. + */ +static int uvc_scan_chain_entity(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- XU %d", entity->id); + + if (entity->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has more " + "than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&entity->chain, &video->extensions); + break; + + case VC_PROCESSING_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- PU %d", entity->id); + + if (video->processing != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple " + "Processing Units in chain.\n"); + return -1; + } + + video->processing = entity; + break; + + case VC_SELECTOR_UNIT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- SU %d", entity->id); + + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) + break; + + if (video->selector != NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found multiple Selector " + "Units in chain.\n"); + return -1; + } + + video->selector = entity; + break; + + case ITT_VENDOR_SPECIFIC: + case ITT_CAMERA: + case ITT_MEDIA_TRANSPORT_INPUT: + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT %d\n", entity->id); + + list_add_tail(&entity->chain, &video->iterms); + break; + + default: + uvc_trace(UVC_TRACE_DESCR, "Unsupported entity type " + "0x%04x found in chain.\n", UVC_ENTITY_TYPE(entity)); + return -1; + } + + return 0; +} + +static int uvc_scan_chain_forward(struct uvc_video_device *video, + struct uvc_entity *entity, struct uvc_entity *prev) +{ + struct uvc_entity *forward; + int found; + + /* Forward scan */ + forward = NULL; + found = 0; + + while (1) { + forward = uvc_entity_by_reference(video->dev, entity->id, + forward); + if (forward == NULL) + break; + + if (UVC_ENTITY_TYPE(forward) != VC_EXTENSION_UNIT || + forward == prev) + continue; + + if (forward->extension.bNrInPins != 1) { + uvc_trace(UVC_TRACE_DESCR, "Extension unit %d has" + "more than 1 input pin.\n", entity->id); + return -1; + } + + list_add_tail(&forward->chain, &video->extensions); + if (uvc_trace_param & UVC_TRACE_PROBE) { + if (!found) + printk(" (-> XU"); + + printk(" %d", forward->id); + found = 1; + } + } + if (found) + printk(")"); + + return 0; +} + +static int uvc_scan_chain_backward(struct uvc_video_device *video, + struct uvc_entity *entity) +{ + struct uvc_entity *term; + int id = -1, i; + + switch (UVC_ENTITY_TYPE(entity)) { + case VC_EXTENSION_UNIT: + id = entity->extension.baSourceID[0]; + break; + + case VC_PROCESSING_UNIT: + id = entity->processing.bSourceID; + break; + + case VC_SELECTOR_UNIT: + /* Single-input selector units are ignored. */ + if (entity->selector.bNrInPins == 1) { + id = entity->selector.baSourceID[0]; + break; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" <- IT"); + + video->selector = entity; + for (i = 0; i < entity->selector.bNrInPins; ++i) { + id = entity->selector.baSourceID[i]; + term = uvc_entity_by_id(video->dev, id); + if (term == NULL || !UVC_ENTITY_IS_ITERM(term)) { + uvc_trace(UVC_TRACE_DESCR, "Selector unit %d " + "input %d isn't connected to an " + "input terminal\n", entity->id, i); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk(" %d", term->id); + + list_add_tail(&term->chain, &video->iterms); + uvc_scan_chain_forward(video, term, entity); + } + + if (uvc_trace_param & UVC_TRACE_PROBE) + printk("\n"); + + id = 0; + break; + } + + return id; +} + +static int uvc_scan_chain(struct uvc_video_device *video) +{ + struct uvc_entity *entity, *prev; + int id; + + entity = video->oterm; + uvc_trace(UVC_TRACE_PROBE, "Scanning UVC chain: OT %d", entity->id); + id = entity->output.bSourceID; + while (id != 0) { + prev = entity; + entity = uvc_entity_by_id(video->dev, id); + if (entity == NULL) { + uvc_trace(UVC_TRACE_DESCR, "Found reference to " + "unknown entity %d.\n", id); + return -1; + } + + /* Process entity */ + if (uvc_scan_chain_entity(video, entity) < 0) + return -1; + + /* Forward scan */ + if (uvc_scan_chain_forward(video, entity, prev) < 0) + return -1; + + /* Stop when a terminal is found. */ + if (!UVC_ENTITY_IS_UNIT(entity)) + break; + + /* Backward scan */ + id = uvc_scan_chain_backward(video, entity); + if (id < 0) + return id; + } + + /* Initialize the video buffers queue. */ + uvc_queue_init(&video->queue); + + return 0; +} + +/* + * Register the video devices. + * + * The driver currently supports a single video device per control interface + * only. The terminal and units must match the following structure: + * + * ITT_CAMERA -> VC_PROCESSING_UNIT -> VC_EXTENSION_UNIT{0,n} -> TT_STREAMING + * + * The Extension Units, if present, must have a single input pin. The + * Processing Unit and Extension Units can be in any order. Additional + * Extension Units connected to the main chain as single-unit branches are + * also supported. + */ +static int uvc_register_video(struct uvc_device *dev) +{ + struct video_device *vdev; + struct uvc_entity *term; + int found = 0, ret; + + /* Check if the control interface matches the structure we expect. */ + list_for_each_entry(term, &dev->entities, list) { + struct uvc_streaming *streaming; + + if (UVC_ENTITY_TYPE(term) != TT_STREAMING) + continue; + + memset(&dev->video, 0, sizeof dev->video); + mutex_init(&dev->video.ctrl_mutex); + INIT_LIST_HEAD(&dev->video.iterms); + INIT_LIST_HEAD(&dev->video.extensions); + dev->video.oterm = term; + dev->video.dev = dev; + if (uvc_scan_chain(&dev->video) < 0) + continue; + + list_for_each_entry(streaming, &dev->streaming, list) { + if (streaming->header.bTerminalLink == term->id) { + dev->video.streaming = streaming; + found = 1; + break; + } + } + + if (found) + break; + } + + if (!found) { + uvc_printk(KERN_INFO, "No valid video chain found.\n"); + return -1; + } + + if (uvc_trace_param & UVC_TRACE_PROBE) { + uvc_printk(KERN_INFO, "Found a valid video chain ("); + list_for_each_entry(term, &dev->video.iterms, chain) { + printk("%d", term->id); + if (term->chain.next != &dev->video.iterms) + printk(","); + } + printk(" -> %d).\n", dev->video.oterm->id); + } + + /* Initialize the streaming interface with default streaming + * parameters. + */ + if ((ret = uvc_video_init(&dev->video)) < 0) { + uvc_printk(KERN_ERR, "Failed to initialize the device " + "(%d).\n", ret); + return ret; + } + + /* Register the device with V4L. */ + vdev = video_device_alloc(); + if (vdev == NULL) + return -1; + + /* We already hold a reference to dev->udev. The video device will be + * unregistered before the reference is released, so we don't need to + * get another one. + */ + vdev->dev = &dev->intf->dev; + vdev->type = 0; + vdev->type2 = 0; + vdev->minor = -1; + vdev->fops = &uvc_fops; + vdev->release = video_device_release; + strncpy(vdev->name, dev->name, sizeof vdev->name); + + /* Set the driver data before calling video_register_device, otherwise + * uvc_v4l2_open might race us. + * + * FIXME: usb_set_intfdata hasn't been called so far. Is that a + * problem ? Does any function which could be called here get + * a pointer to the usb_interface ? + */ + dev->video.vdev = vdev; + video_set_drvdata(vdev, &dev->video); + + if (video_register_device(vdev, VFL_TYPE_GRABBER, -1) < 0) { + dev->video.vdev = NULL; + video_device_release(vdev); + return -1; + } + + return 0; +} + +/* + * Delete the UVC device. + * + * Called by the kernel when the last reference to the uvc_device structure + * is released. + * + * Unregistering the video devices is done here because every opened instance + * must be closed before the device can be unregistered. An alternative would + * have been to use another reference count for uvc_v4l2_open/uvc_release, and + * unregister the video devices on disconnect when that reference count drops + * to zero. + * + * As this function is called after or during disconnect(), all URBs have + * already been canceled by the USB core. There is no need to kill the + * interrupt URB manually. + */ +void uvc_delete(struct kref *kref) +{ + struct uvc_device *dev = container_of(kref, struct uvc_device, kref); + struct list_head *p, *n; + + /* Unregister the video device */ + uvc_unregister_video(dev); + usb_put_intf(dev->intf); + usb_put_dev(dev->udev); + + uvc_status_cleanup(dev); + uvc_ctrl_cleanup_device(dev); + + list_for_each_safe(p, n, &dev->entities) { + struct uvc_entity *entity; + entity = list_entry(p, struct uvc_entity, list); + kfree(entity); + } + + list_for_each_safe(p, n, &dev->streaming) { + struct uvc_streaming *streaming; + streaming = list_entry(p, struct uvc_streaming, list); + usb_driver_release_interface(&uvc_driver.driver, + streaming->intf); + usb_put_intf(streaming->intf); + kfree(streaming->format); + kfree(streaming->header.bmaControls); + kfree(streaming); + } + + kfree(dev); +} + +static int uvc_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(intf); + struct uvc_device *dev; + int ret; + + if (id->idVendor && id->idProduct) + uvc_trace(UVC_TRACE_PROBE, "Probing known UVC device %s " + "(%04x:%04x)\n", udev->devpath, id->idVendor, + id->idProduct); + else + uvc_trace(UVC_TRACE_PROBE, "Probing generic UVC device %s\n", + udev->devpath); + + /* Allocate memory for the device and initialize it */ + if ((dev = kzalloc(sizeof *dev, GFP_KERNEL)) == NULL) + return -ENOMEM; + + INIT_LIST_HEAD(&dev->entities); + INIT_LIST_HEAD(&dev->streaming); + kref_init(&dev->kref); + + dev->udev = usb_get_dev(udev); + dev->intf = usb_get_intf(intf); + dev->intfnum = intf->cur_altsetting->desc.bInterfaceNumber; + dev->quirks = id->driver_info | uvc_quirks_param; + + if (udev->product != NULL) + strncpy(dev->name, udev->product, sizeof dev->name); + else + snprintf(dev->name, sizeof dev->name, + "UVC Camera (%04x:%04x)", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + /* Parse the Video Class control descriptor */ + if (uvc_parse_control(dev) < 0) { + uvc_trace(UVC_TRACE_PROBE, "Unable to parse UVC " + "descriptors.\n"); + goto error; + } + + uvc_printk(KERN_INFO, "Found UVC %u.%02u device %s (%04x:%04x)\n", + dev->uvc_version >> 8, dev->uvc_version & 0xff, + udev->product ? udev->product : "", + le16_to_cpu(udev->descriptor.idVendor), + le16_to_cpu(udev->descriptor.idProduct)); + + if (uvc_quirks_param != 0) { + uvc_printk(KERN_INFO, "Forcing device quirks 0x%x by module " + "parameter for testing purpose.\n", uvc_quirks_param); + uvc_printk(KERN_INFO, "Please report required quirks to the " + "linux-uvc-devel mailing list.\n"); + } + + /* Initialize controls */ + if (uvc_ctrl_init_device(dev) < 0) + goto error; + + /* Register the video devices */ + if (uvc_register_video(dev) < 0) + goto error; + + /* Save our data pointer in the interface data */ + usb_set_intfdata(intf, dev); + + /* Initialize the interrupt URB */ + if ((ret = uvc_status_init(dev)) < 0) { + uvc_printk(KERN_INFO, "Unable to initialize the status " + "endpoint (%d), status interrupt will not be " + "supported.\n", ret); + } + + uvc_trace(UVC_TRACE_PROBE, "UVC device initialized.\n"); + return 0; + +error: + kref_put(&dev->kref, uvc_delete); + return -ENODEV; +} + +static void uvc_disconnect(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + /* Set the USB interface data to NULL. This can be done outside the + * lock, as there's no other reader. + */ + usb_set_intfdata(intf, NULL); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOSTREAMING) + return; + + /* uvc_v4l2_open() might race uvc_disconnect(). A static driver-wide + * lock is needed to prevent uvc_disconnect from releasing its + * reference to the uvc_device instance after uvc_v4l2_open() received + * the pointer to the device (video_devdata) but before it got the + * chance to increase the reference count (kref_get). + */ + mutex_lock(&uvc_driver.open_mutex); + + dev->state |= UVC_DEV_DISCONNECTED; + kref_put(&dev->kref, uvc_delete); + + mutex_unlock(&uvc_driver.open_mutex); +} + +static int uvc_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + + uvc_trace(UVC_TRACE_SUSPEND, "Suspending interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + /* Controls are cached on the fly so they don't need to be saved. */ + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) + return uvc_status_suspend(dev); + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Suspend: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_suspend(&dev->video); +} + +static int uvc_resume(struct usb_interface *intf) +{ + struct uvc_device *dev = usb_get_intfdata(intf); + int ret; + + uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n", + intf->cur_altsetting->desc.bInterfaceNumber); + + if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) { + if ((ret = uvc_ctrl_resume_device(dev)) < 0) + return ret; + + return uvc_status_resume(dev); + } + + if (dev->video.streaming->intf != intf) { + uvc_trace(UVC_TRACE_SUSPEND, "Resume: video streaming USB " + "interface mismatch.\n"); + return -EINVAL; + } + + return uvc_video_resume(&dev->video); +} + +/* ------------------------------------------------------------------------ + * Driver initialization and cleanup + */ + +/* + * The Logitech cameras listed below have their interface class set to + * VENDOR_SPEC because they don't announce themselves as UVC devices, even + * though they are compliant. + */ +static struct usb_device_id uvc_ids[] = { + /* ALi M5606 (Clevo M540SR) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0402, + .idProduct = 0x5606, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Creative Live! Optia */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x041e, + .idProduct = 0x4057, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam NX-6000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x00f8, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Microsoft Lifecam VX-7000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x045e, + .idProduct = 0x0723, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Logitech Quickcam Fusion */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c1, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Orbit MP */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c2, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro for Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c3, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam Pro 5000 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c5, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Dell Notebook */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c6, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Logitech Quickcam OEM Cisco VT Camera II */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x046d, + .idProduct = 0x08c7, + .bInterfaceClass = USB_CLASS_VENDOR_SPEC, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0 }, + /* Apple Built-In iSight */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05ac, + .idProduct = 0x8501, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_BUILTIN_ISIGHT }, + /* Genesys Logic USB 2.0 PC Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x05e3, + .idProduct = 0x0505, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Silicon Motion SM371 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x090c, + .idProduct = 0xb371, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* MT6227 */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x0e8d, + .idProduct = 0x0004, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Syntek (HP Spartan) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x5212, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Syntek (Asus U3S) */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x174f, + .idProduct = 0x8a33, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STREAM_NO_FID }, + /* Ecamm Pico iMage */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x18cd, + .idProduct = 0xcafe, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_EXTRAFIELDS }, + /* Bodelin ProScopeHR */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_DEV_HI + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x19ab, + .idProduct = 0x1000, + .bcdDevice_hi = 0x0126, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_STATUS_INTERVAL }, + /* SiGma Micro USB Web Camera */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x1c4f, + .idProduct = 0x3000, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX + | UVC_QUIRK_IGNORE_SELECTOR_UNIT}, + /* Acer OEM Webcam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0100, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Packard Bell OEM Webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0101, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer Crystal Eye webcam */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0102, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Acer OrbiCam - Unknown vendor */ + { .match_flags = USB_DEVICE_ID_MATCH_DEVICE + | USB_DEVICE_ID_MATCH_INT_INFO, + .idVendor = 0x5986, + .idProduct = 0x0200, + .bInterfaceClass = USB_CLASS_VIDEO, + .bInterfaceSubClass = 1, + .bInterfaceProtocol = 0, + .driver_info = UVC_QUIRK_PROBE_MINMAX }, + /* Generic USB Video Class */ + { USB_INTERFACE_INFO(USB_CLASS_VIDEO, 1, 0) }, + {} +}; + +MODULE_DEVICE_TABLE(usb, uvc_ids); + +struct uvc_driver uvc_driver = { + .driver = { + .name = "uvcvideo", + .probe = uvc_probe, + .disconnect = uvc_disconnect, + .suspend = uvc_suspend, + .resume = uvc_resume, + .id_table = uvc_ids, + .supports_autosuspend = 1, + }, +}; + +static int __init uvc_init(void) +{ + int result; + + INIT_LIST_HEAD(&uvc_driver.devices); + INIT_LIST_HEAD(&uvc_driver.controls); + mutex_init(&uvc_driver.open_mutex); + mutex_init(&uvc_driver.ctrl_mutex); + + uvc_ctrl_init(); + + result = usb_register(&uvc_driver.driver); + if (result == 0) + printk(KERN_INFO DRIVER_DESC " (" DRIVER_VERSION ")\n"); + return result; +} + +static void __exit uvc_cleanup(void) +{ + usb_deregister(&uvc_driver.driver); +} + +module_init(uvc_init); +module_exit(uvc_cleanup); + +module_param_named(quirks, uvc_quirks_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(quirks, "Forced device quirks"); +module_param_named(trace, uvc_trace_param, uint, S_IRUGO|S_IWUSR); +MODULE_PARM_DESC(trace, "Trace level bitmask"); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRIVER_VERSION); diff --git a/drivers/media/video/uvc/uvc_isight.c b/drivers/media/video/uvc/uvc_isight.c new file mode 100644 index 0000000..37bdefd --- /dev/null +++ b/drivers/media/video/uvc/uvc_isight.c @@ -0,0 +1,134 @@ +/* + * uvc_isight.c -- USB Video Class driver - iSight support + * + * Copyright (C) 2006-2007 + * Ivan N. Zlatev + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include + +#include "uvcvideo.h" + +/* Built-in iSight webcams implements most of UVC 1.0 except a + * different packet format. Instead of sending a header at the + * beginning of each isochronous transfer payload, the webcam sends a + * single header per image (on its own in a packet), followed by + * packets containing data only. + * + * Offset Size (bytes) Description + * ------------------------------------------------------------------ + * 0x00 1 Header length + * 0x01 1 Flags (UVC-compliant) + * 0x02 4 Always equal to '11223344' + * 0x06 8 Always equal to 'deadbeefdeadface' + * 0x0e 16 Unknown + * + * The header can be prefixed by an optional, unknown-purpose byte. + */ + +static int isight_decode(struct uvc_video_queue *queue, struct uvc_buffer *buf, + const __u8 *data, unsigned int len) +{ + static const __u8 hdr[] = { + 0x11, 0x22, 0x33, 0x44, + 0xde, 0xad, 0xbe, 0xef, + 0xde, 0xad, 0xfa, 0xce + }; + + unsigned int maxlen, nbytes; + __u8 *mem; + int is_header = 0; + + if (buf == NULL) + return 0; + + if ((len >= 14 && memcmp(&data[2], hdr, 12) == 0) || + (len >= 15 && memcmp(&data[3], hdr, 12) == 0)) { + uvc_trace(UVC_TRACE_FRAME, "iSight header found\n"); + is_header = 1; + } + + /* Synchronize to the input stream by waiting for a header packet. */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (!is_header) { + uvc_trace(UVC_TRACE_FRAME, "Dropping packet (out of " + "sync).\n"); + return 0; + } + + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. + */ + if (is_header && buf->buf.bytesused != 0) { + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + /* Copy the video data to the buffer. Skip header packets, as they + * contain no data. + */ + if (!is_header) { + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min(len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + if (len > maxlen || buf->buf.bytesused == buf->buf.length) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete " + "(overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } + } + + return 0; +} + +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf) +{ + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", + urb->iso_frame_desc[i].status); + } + + /* Decode the payload packet. + * uvc_video_decode is entered twice when a frame transition + * has been detected because the end of frame can only be + * reliably detected when the first packet of the new frame + * is processed. The first pass detects the transition and + * closes the previous frame's buffer, the second pass + * processes the data of the first payload of the new frame. + */ + do { + ret = isight_decode(&video->queue, buf, + urb->transfer_buffer + + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + + if (buf == NULL) + break; + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + } +} diff --git a/drivers/media/video/uvc/uvc_queue.c b/drivers/media/video/uvc/uvc_queue.c new file mode 100644 index 0000000..0923f0e --- /dev/null +++ b/drivers/media/video/uvc/uvc_queue.c @@ -0,0 +1,477 @@ +/* + * uvc_queue.c -- USB Video Class driver - Buffers management + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * Video buffers queue management. + * + * Video queues is initialized by uvc_queue_init(). The function performs + * basic initialization of the uvc_video_queue struct and never fails. + * + * Video buffer allocation and freeing are performed by uvc_alloc_buffers and + * uvc_free_buffers respectively. The former acquires the video queue lock, + * while the later must be called with the lock held (so that allocation can + * free previously allocated buffers). Trying to free buffers that are mapped + * to user space will return -EBUSY. + * + * Video buffers are managed using two queues. However, unlike most USB video + * drivers which use an in queue and an out queue, we use a main queue which + * holds all queued buffers (both 'empty' and 'done' buffers), and an irq + * queue which holds empty buffers. This design (copied from video-buf) + * minimizes locking in interrupt, as only one queue is shared between + * interrupt and user contexts. + * + * Use cases + * --------- + * + * Unless stated otherwise, all operations which modify the irq buffers queue + * are protected by the irq spinlock. + * + * 1. The user queues the buffers, starts streaming and dequeues a buffer. + * + * The buffers are added to the main and irq queues. Both operations are + * protected by the queue lock, and the latert is protected by the irq + * spinlock as well. + * + * The completion handler fetches a buffer from the irq queue and fills it + * with video data. If no buffer is available (irq queue empty), the handler + * returns immediately. + * + * When the buffer is full, the completion handler removes it from the irq + * queue, marks it as ready (UVC_BUF_STATE_DONE) and wake its wait queue. + * At that point, any process waiting on the buffer will be woken up. If a + * process tries to dequeue a buffer after it has been marked ready, the + * dequeing will succeed immediately. + * + * 2. Buffers are queued, user is waiting on a buffer and the device gets + * disconnected. + * + * When the device is disconnected, the kernel calls the completion handler + * with an appropriate status code. The handler marks all buffers in the + * irq queue as being erroneous (UVC_BUF_STATE_ERROR) and wakes them up so + * that any process waiting on a buffer gets woken up. + * + * Waking up up the first buffer on the irq list is not enough, as the + * process waiting on the buffer might restart the dequeue operation + * immediately. + * + */ + +void uvc_queue_init(struct uvc_video_queue *queue) +{ + mutex_init(&queue->mutex); + spin_lock_init(&queue->irqlock); + INIT_LIST_HEAD(&queue->mainqueue); + INIT_LIST_HEAD(&queue->irqqueue); +} + +/* + * Allocate the video buffers. + * + * Pages are reserved to make sure they will not be swaped, as they will be + * filled in URB completion handler. + * + * Buffers will be individually mapped, so they must all be page aligned. + */ +int uvc_alloc_buffers(struct uvc_video_queue *queue, unsigned int nbuffers, + unsigned int buflength) +{ + unsigned int bufsize = PAGE_ALIGN(buflength); + unsigned int i; + void *mem = NULL; + int ret; + + if (nbuffers > UVC_MAX_VIDEO_BUFFERS) + nbuffers = UVC_MAX_VIDEO_BUFFERS; + + mutex_lock(&queue->mutex); + + if ((ret = uvc_free_buffers(queue)) < 0) + goto done; + + /* Bail out if no buffers should be allocated. */ + if (nbuffers == 0) + goto done; + + /* Decrement the number of buffers until allocation succeeds. */ + for (; nbuffers > 0; --nbuffers) { + mem = vmalloc_32(nbuffers * bufsize); + if (mem != NULL) + break; + } + + if (mem == NULL) { + ret = -ENOMEM; + goto done; + } + + for (i = 0; i < nbuffers; ++i) { + memset(&queue->buffer[i], 0, sizeof queue->buffer[i]); + queue->buffer[i].buf.index = i; + queue->buffer[i].buf.m.offset = i * bufsize; + queue->buffer[i].buf.length = buflength; + queue->buffer[i].buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + queue->buffer[i].buf.sequence = 0; + queue->buffer[i].buf.field = V4L2_FIELD_NONE; + queue->buffer[i].buf.memory = V4L2_MEMORY_MMAP; + queue->buffer[i].buf.flags = 0; + init_waitqueue_head(&queue->buffer[i].wait); + } + + queue->mem = mem; + queue->count = nbuffers; + queue->buf_size = bufsize; + ret = nbuffers; + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Free the video buffers. + * + * This function must be called with the queue lock held. + */ +int uvc_free_buffers(struct uvc_video_queue *queue) +{ + unsigned int i; + + for (i = 0; i < queue->count; ++i) { + if (queue->buffer[i].vma_use_count != 0) + return -EBUSY; + } + + if (queue->count) { + vfree(queue->mem); + queue->count = 0; + } + + return 0; +} + +static void __uvc_query_buffer(struct uvc_buffer *buf, + struct v4l2_buffer *v4l2_buf) +{ + memcpy(v4l2_buf, &buf->buf, sizeof *v4l2_buf); + + if (buf->vma_use_count) + v4l2_buf->flags |= V4L2_BUF_FLAG_MAPPED; + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + case UVC_BUF_STATE_DONE: + v4l2_buf->flags |= V4L2_BUF_FLAG_DONE; + break; + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + v4l2_buf->flags |= V4L2_BUF_FLAG_QUEUED; + break; + case UVC_BUF_STATE_IDLE: + default: + break; + } +} + +int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + int ret = 0; + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + ret = -EINVAL; + goto done; + } + + __uvc_query_buffer(&queue->buffer[v4l2_buf->index], v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Queue a video buffer. Attempting to queue a buffer that has already been + * queued will return -EINVAL. + */ +int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf) +{ + struct uvc_buffer *buf; + unsigned long flags; + int ret = 0; + + uvc_trace(UVC_TRACE_CAPTURE, "Queuing buffer %u.\n", v4l2_buf->index); + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (v4l2_buf->index >= queue->count) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Out of range index.\n"); + ret = -EINVAL; + goto done; + } + + buf = &queue->buffer[v4l2_buf->index]; + if (buf->state != UVC_BUF_STATE_IDLE) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state " + "(%u).\n", buf->state); + ret = -EINVAL; + goto done; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (queue->flags & UVC_QUEUE_DISCONNECTED) { + spin_unlock_irqrestore(&queue->irqlock, flags); + ret = -ENODEV; + goto done; + } + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + list_add_tail(&buf->stream, &queue->mainqueue); + list_add_tail(&buf->queue, &queue->irqqueue); + spin_unlock_irqrestore(&queue->irqlock, flags); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +static int uvc_queue_waiton(struct uvc_buffer *buf, int nonblocking) +{ + if (nonblocking) { + return (buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE) + ? 0 : -EAGAIN; + } + + return wait_event_interruptible(buf->wait, + buf->state != UVC_BUF_STATE_QUEUED && + buf->state != UVC_BUF_STATE_ACTIVE); +} + +/* + * Dequeue a video buffer. If nonblocking is false, block until a buffer is + * available. + */ +int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking) +{ + struct uvc_buffer *buf; + int ret = 0; + + if (v4l2_buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + v4l2_buf->memory != V4L2_MEMORY_MMAP) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer type (%u) " + "and/or memory (%u).\n", v4l2_buf->type, + v4l2_buf->memory); + return -EINVAL; + } + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + uvc_trace(UVC_TRACE_CAPTURE, "[E] Empty buffer queue.\n"); + ret = -EINVAL; + goto done; + } + + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + if ((ret = uvc_queue_waiton(buf, nonblocking)) < 0) + goto done; + + uvc_trace(UVC_TRACE_CAPTURE, "Dequeuing buffer %u (%u, %u bytes).\n", + buf->buf.index, buf->state, buf->buf.bytesused); + + switch (buf->state) { + case UVC_BUF_STATE_ERROR: + uvc_trace(UVC_TRACE_CAPTURE, "[W] Corrupted data " + "(transmission error).\n"); + ret = -EIO; + case UVC_BUF_STATE_DONE: + buf->state = UVC_BUF_STATE_IDLE; + break; + + case UVC_BUF_STATE_IDLE: + case UVC_BUF_STATE_QUEUED: + case UVC_BUF_STATE_ACTIVE: + default: + uvc_trace(UVC_TRACE_CAPTURE, "[E] Invalid buffer state %u " + "(driver bug?).\n", buf->state); + ret = -EINVAL; + goto done; + } + + list_del(&buf->stream); + __uvc_query_buffer(buf, v4l2_buf); + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Poll the video queue. + * + * This function implements video queue polling and is intended to be used by + * the device poll handler. + */ +unsigned int uvc_queue_poll(struct uvc_video_queue *queue, struct file *file, + poll_table *wait) +{ + struct uvc_buffer *buf; + unsigned int mask = 0; + + mutex_lock(&queue->mutex); + if (list_empty(&queue->mainqueue)) { + mask |= POLLERR; + goto done; + } + buf = list_first_entry(&queue->mainqueue, struct uvc_buffer, stream); + + poll_wait(file, &buf->wait, wait); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + mask |= POLLIN | POLLRDNORM; + +done: + mutex_unlock(&queue->mutex); + return mask; +} + +/* + * Enable or disable the video buffers queue. + * + * The queue must be enabled before starting video acquisition and must be + * disabled after stopping it. This ensures that the video buffers queue + * state can be properly initialized before buffers are accessed from the + * interrupt handler. + * + * Enabling the video queue initializes parameters (such as sequence number, + * sync pattern, ...). If the queue is already enabled, return -EBUSY. + * + * Disabling the video queue cancels the queue and removes all buffers from + * the main queue. + * + * This function can't be called from interrupt context. Use + * uvc_queue_cancel() instead. + */ +int uvc_queue_enable(struct uvc_video_queue *queue, int enable) +{ + unsigned int i; + int ret = 0; + + mutex_lock(&queue->mutex); + if (enable) { + if (uvc_queue_streaming(queue)) { + ret = -EBUSY; + goto done; + } + queue->sequence = 0; + queue->flags |= UVC_QUEUE_STREAMING; + } else { + uvc_queue_cancel(queue, 0); + INIT_LIST_HEAD(&queue->mainqueue); + + for (i = 0; i < queue->count; ++i) + queue->buffer[i].state = UVC_BUF_STATE_IDLE; + + queue->flags &= ~UVC_QUEUE_STREAMING; + } + +done: + mutex_unlock(&queue->mutex); + return ret; +} + +/* + * Cancel the video buffers queue. + * + * Cancelling the queue marks all buffers on the irq queue as erroneous, + * wakes them up and remove them from the queue. + * + * If the disconnect parameter is set, further calls to uvc_queue_buffer will + * fail with -ENODEV. + * + * This function acquires the irq spinlock and can be called from interrupt + * context. + */ +void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect) +{ + struct uvc_buffer *buf; + unsigned long flags; + + spin_lock_irqsave(&queue->irqlock, flags); + while (!list_empty(&queue->irqqueue)) { + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + list_del(&buf->queue); + buf->state = UVC_BUF_STATE_ERROR; + wake_up(&buf->wait); + } + /* This must be protected by the irqlock spinlock to avoid race + * conditions between uvc_queue_buffer and the disconnection event that + * could result in an interruptible wait in uvc_dequeue_buffer. Do not + * blindly replace this logic by checking for the UVC_DEV_DISCONNECTED + * state outside the queue code. + */ + if (disconnect) + queue->flags |= UVC_QUEUE_DISCONNECTED; + spin_unlock_irqrestore(&queue->irqlock, flags); +} + +struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf) +{ + struct uvc_buffer *nextbuf; + unsigned long flags; + + if ((queue->flags & UVC_QUEUE_DROP_INCOMPLETE) && + buf->buf.length != buf->buf.bytesused) { + buf->state = UVC_BUF_STATE_QUEUED; + buf->buf.bytesused = 0; + return buf; + } + + spin_lock_irqsave(&queue->irqlock, flags); + list_del(&buf->queue); + if (!list_empty(&queue->irqqueue)) + nextbuf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + else + nextbuf = NULL; + spin_unlock_irqrestore(&queue->irqlock, flags); + + buf->buf.sequence = queue->sequence++; + do_gettimeofday(&buf->buf.timestamp); + + wake_up(&buf->wait); + return nextbuf; +} diff --git a/drivers/media/video/uvc/uvc_status.c b/drivers/media/video/uvc/uvc_status.c new file mode 100644 index 0000000..be9084e --- /dev/null +++ b/drivers/media/video/uvc/uvc_status.c @@ -0,0 +1,207 @@ +/* + * uvc_status.c -- USB Video Class driver - Status endpoint + * + * Copyright (C) 2007-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include + +#include "uvcvideo.h" + +/* -------------------------------------------------------------------------- + * Input device + */ +static int uvc_input_init(struct uvc_device *dev) +{ + struct usb_device *udev = dev->udev; + struct input_dev *input; + char *phys = NULL; + int ret; + + input = input_allocate_device(); + if (input == NULL) + return -ENOMEM; + + phys = kmalloc(6 + strlen(udev->bus->bus_name) + strlen(udev->devpath), + GFP_KERNEL); + if (phys == NULL) { + ret = -ENOMEM; + goto error; + } + sprintf(phys, "usb-%s-%s", udev->bus->bus_name, udev->devpath); + + input->name = dev->name; + input->phys = phys; + usb_to_input_id(udev, &input->id); + input->dev.parent = &dev->intf->dev; + + set_bit(EV_KEY, input->evbit); + set_bit(BTN_0, input->keybit); + + if ((ret = input_register_device(input)) < 0) + goto error; + + dev->input = input; + return 0; + +error: + input_free_device(input); + kfree(phys); + return ret; +} + +static void uvc_input_cleanup(struct uvc_device *dev) +{ + if (dev->input) + input_unregister_device(dev->input); +} + +/* -------------------------------------------------------------------------- + * Status interrupt endpoint + */ +static void uvc_event_streaming(struct uvc_device *dev, __u8 *data, int len) +{ + if (len < 3) { + uvc_trace(UVC_TRACE_STATUS, "Invalid streaming status event " + "received.\n"); + return; + } + + if (data[2] == 0) { + if (len < 4) + return; + uvc_trace(UVC_TRACE_STATUS, "Button (intf %u) %s len %d\n", + data[1], data[3] ? "pressed" : "released", len); + if (dev->input) + input_report_key(dev->input, BTN_0, data[3]); + } else { + uvc_trace(UVC_TRACE_STATUS, "Stream %u error event %02x %02x " + "len %d.\n", data[1], data[2], data[3], len); + } +} + +static void uvc_event_control(struct uvc_device *dev, __u8 *data, int len) +{ + char *attrs[3] = { "value", "info", "failure" }; + + if (len < 6 || data[2] != 0 || data[4] > 2) { + uvc_trace(UVC_TRACE_STATUS, "Invalid control status event " + "received.\n"); + return; + } + + uvc_trace(UVC_TRACE_STATUS, "Control %u/%u %s change len %d.\n", + data[1], data[3], attrs[data[4]], len); +} + +static void uvc_status_complete(struct urb *urb) +{ + struct uvc_device *dev = urb->context; + int len, ret; + + switch (urb->status) { + case 0: + break; + + case -ENOENT: /* usb_kill_urb() called. */ + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + case -EPROTO: /* Device is disconnected (reported by some + * host controller). */ + return; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in status " + "completion handler.\n", urb->status); + return; + } + + len = urb->actual_length; + if (len > 0) { + switch (dev->status[0] & 0x0f) { + case UVC_STATUS_TYPE_CONTROL: + uvc_event_control(dev, dev->status, len); + break; + + case UVC_STATUS_TYPE_STREAMING: + uvc_event_streaming(dev, dev->status, len); + break; + + default: + uvc_printk(KERN_INFO, "unknown event type %u.\n", + dev->status[0]); + break; + } + } + + /* Resubmit the URB. */ + urb->interval = dev->int_ep->desc.bInterval; + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit status URB (%d).\n", + ret); + } +} + +int uvc_status_init(struct uvc_device *dev) +{ + struct usb_host_endpoint *ep = dev->int_ep; + unsigned int pipe; + int interval; + + if (ep == NULL) + return 0; + + uvc_input_init(dev); + + dev->int_urb = usb_alloc_urb(0, GFP_KERNEL); + if (dev->int_urb == NULL) + return -ENOMEM; + + pipe = usb_rcvintpipe(dev->udev, ep->desc.bEndpointAddress); + + /* For high-speed interrupt endpoints, the bInterval value is used as + * an exponent of two. Some developers forgot about it. + */ + interval = ep->desc.bInterval; + if (interval > 16 && dev->udev->speed == USB_SPEED_HIGH && + (dev->quirks & UVC_QUIRK_STATUS_INTERVAL)) + interval = fls(interval) - 1; + + usb_fill_int_urb(dev->int_urb, dev->udev, pipe, + dev->status, sizeof dev->status, uvc_status_complete, + dev, interval); + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} + +void uvc_status_cleanup(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + usb_free_urb(dev->int_urb); + uvc_input_cleanup(dev); +} + +int uvc_status_suspend(struct uvc_device *dev) +{ + usb_kill_urb(dev->int_urb); + return 0; +} + +int uvc_status_resume(struct uvc_device *dev) +{ + if (dev->int_urb == NULL) + return 0; + + return usb_submit_urb(dev->int_urb, GFP_KERNEL); +} diff --git a/drivers/media/video/uvc/uvc_v4l2.c b/drivers/media/video/uvc/uvc_v4l2.c new file mode 100644 index 0000000..2e0a665 --- /dev/null +++ b/drivers/media/video/uvc/uvc_v4l2.c @@ -0,0 +1,1105 @@ +/* + * uvc_v4l2.c -- USB Video Class driver - V4L2 API + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * V4L2 interface + */ + +/* + * Mapping V4L2 controls to UVC controls can be straighforward if done well. + * Most of the UVC controls exist in V4L2, and can be mapped directly. Some + * must be grouped (for instance the Red Balance, Blue Balance and Do White + * Balance V4L2 controls use the White Balance Component UVC control) or + * otherwise translated. The approach we take here is to use a translation + * table for the controls which can be mapped directly, and handle the others + * manually. + */ +static int uvc_v4l2_query_menu(struct uvc_video_device *video, + struct v4l2_querymenu *query_menu) +{ + struct uvc_menu_info *menu_info; + struct uvc_control_mapping *mapping; + struct uvc_control *ctrl; + + ctrl = uvc_find_control(video, query_menu->id, &mapping); + if (ctrl == NULL || mapping->v4l2_type != V4L2_CTRL_TYPE_MENU) + return -EINVAL; + + if (query_menu->index >= mapping->menu_count) + return -EINVAL; + + menu_info = &mapping->menu_info[query_menu->index]; + strncpy(query_menu->name, menu_info->name, 32); + return 0; +} + +/* + * Find the frame interval closest to the requested frame interval for the + * given frame format and size. This should be done by the device as part of + * the Video Probe and Commit negotiation, but some hardware don't implement + * that feature. + */ +static __u32 uvc_try_frame_interval(struct uvc_frame *frame, __u32 interval) +{ + unsigned int i; + + if (frame->bFrameIntervalType) { + __u32 best = -1, dist; + + for (i = 0; i < frame->bFrameIntervalType; ++i) { + dist = interval > frame->dwFrameInterval[i] + ? interval - frame->dwFrameInterval[i] + : frame->dwFrameInterval[i] - interval; + + if (dist > best) + break; + + best = dist; + } + + interval = frame->dwFrameInterval[i-1]; + } else { + const __u32 min = frame->dwFrameInterval[0]; + const __u32 max = frame->dwFrameInterval[1]; + const __u32 step = frame->dwFrameInterval[2]; + + interval = min + (interval - min + step/2) / step * step; + if (interval > max) + interval = max; + } + + return interval; +} + +static int uvc_v4l2_try_format(struct uvc_video_device *video, + struct v4l2_format *fmt, struct uvc_streaming_control *probe, + struct uvc_format **uvc_format, struct uvc_frame **uvc_frame) +{ + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + __u16 rw, rh; + unsigned int d, maxd; + unsigned int i; + __u32 interval; + int ret = 0; + __u8 *fcc; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + fcc = (__u8 *)&fmt->fmt.pix.pixelformat; + uvc_trace(UVC_TRACE_FORMAT, "Trying format 0x%08x (%c%c%c%c): %ux%u.\n", + fmt->fmt.pix.pixelformat, + fcc[0], fcc[1], fcc[2], fcc[3], + fmt->fmt.pix.width, fmt->fmt.pix.height); + + /* Check if the hardware supports the requested format. */ + for (i = 0; i < video->streaming->nformats; ++i) { + format = &video->streaming->format[i]; + if (format->fcc == fmt->fmt.pix.pixelformat) + break; + } + + if (format == NULL || format->fcc != fmt->fmt.pix.pixelformat) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported format 0x%08x.\n", + fmt->fmt.pix.pixelformat); + return -EINVAL; + } + + /* Find the closest image size. The distance between image sizes is + * the size in pixels of the non-overlapping regions between the + * requested size and the frame-specified size. + */ + rw = fmt->fmt.pix.width; + rh = fmt->fmt.pix.height; + maxd = (unsigned int)-1; + + for (i = 0; i < format->nframes; ++i) { + __u16 w = format->frame[i].wWidth; + __u16 h = format->frame[i].wHeight; + + d = min(w, rw) * min(h, rh); + d = w*h + rw*rh - 2*d; + if (d < maxd) { + maxd = d; + frame = &format->frame[i]; + } + + if (maxd == 0) + break; + } + + if (frame == NULL) { + uvc_trace(UVC_TRACE_FORMAT, "Unsupported size %ux%u.\n", + fmt->fmt.pix.width, fmt->fmt.pix.height); + return -EINVAL; + } + + /* Use the default frame interval. */ + interval = frame->dwDefaultFrameInterval; + uvc_trace(UVC_TRACE_FORMAT, "Using default frame interval %u.%u us " + "(%u.%u fps).\n", interval/10, interval%10, 10000000/interval, + (100000000/interval)%10); + + /* Set the format index, frame index and frame interval. */ + memset(probe, 0, sizeof *probe); + probe->bmHint = 1; /* dwFrameInterval */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + probe->dwFrameInterval = uvc_try_frame_interval(frame, interval); + /* Some webcams stall the probe control set request when the + * dwMaxVideoFrameSize field is set to zero. The UVC specification + * clearly states that the field is read-only from the host, so this + * is a webcam bug. Set dwMaxVideoFrameSize to the value reported by + * the webcam to work around the problem. + * + * The workaround could probably be enabled for all webcams, so the + * quirk can be removed if needed. It's currently useful to detect + * webcam bugs and fix them before they hit the market (providing + * developers test their webcams with the Linux driver as well as with + * the Windows driver). + */ + if (video->dev->quirks & UVC_QUIRK_PROBE_EXTRAFIELDS) + probe->dwMaxVideoFrameSize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + /* Probe the device */ + if ((ret = uvc_probe_video(video, probe)) < 0) + goto done; + + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = probe->dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + if (uvc_format != NULL) + *uvc_format = format; + if (uvc_frame != NULL) + *uvc_frame = frame; + +done: + return ret; +} + +static int uvc_v4l2_get_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_format *format = video->streaming->cur_format; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (format == NULL || frame == NULL) + return -EINVAL; + + fmt->fmt.pix.pixelformat = format->fcc; + fmt->fmt.pix.width = frame->wWidth; + fmt->fmt.pix.height = frame->wHeight; + fmt->fmt.pix.field = V4L2_FIELD_NONE; + fmt->fmt.pix.bytesperline = format->bpp * frame->wWidth / 8; + fmt->fmt.pix.sizeimage = video->streaming->ctrl.dwMaxVideoFrameSize; + fmt->fmt.pix.colorspace = format->colorspace; + fmt->fmt.pix.priv = 0; + + return 0; +} + +static int uvc_v4l2_set_format(struct uvc_video_device *video, + struct v4l2_format *fmt) +{ + struct uvc_streaming_control probe; + struct uvc_format *format; + struct uvc_frame *frame; + int ret; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + ret = uvc_v4l2_try_format(video, fmt, &probe, &format, &frame); + if (ret < 0) + return ret; + + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + + return 0; +} + +static int uvc_v4l2_get_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + uint32_t numerator, denominator; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + numerator = video->streaming->ctrl.dwFrameInterval; + denominator = 10000000; + uvc_simplify_fraction(&numerator, &denominator, 8, 333); + + memset(parm, 0, sizeof *parm); + parm->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + parm->parm.capture.capability = V4L2_CAP_TIMEPERFRAME; + parm->parm.capture.capturemode = 0; + parm->parm.capture.timeperframe.numerator = numerator; + parm->parm.capture.timeperframe.denominator = denominator; + parm->parm.capture.extendedmode = 0; + parm->parm.capture.readbuffers = 0; + + return 0; +} + +static int uvc_v4l2_set_streamparm(struct uvc_video_device *video, + struct v4l2_streamparm *parm) +{ + struct uvc_frame *frame = video->streaming->cur_frame; + struct uvc_streaming_control probe; + uint32_t interval; + int ret; + + if (parm->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (uvc_queue_streaming(&video->queue)) + return -EBUSY; + + memcpy(&probe, &video->streaming->ctrl, sizeof probe); + interval = uvc_fraction_to_interval( + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator); + + uvc_trace(UVC_TRACE_FORMAT, "Setting frame interval to %u/%u (%u).\n", + parm->parm.capture.timeperframe.numerator, + parm->parm.capture.timeperframe.denominator, + interval); + probe.dwFrameInterval = uvc_try_frame_interval(frame, interval); + + /* Probe the device with the new settings. */ + if ((ret = uvc_probe_video(video, &probe)) < 0) + return ret; + + /* Commit the new settings. */ + if ((ret = uvc_set_video_ctrl(video, &probe, 0)) < 0) + return ret; + + memcpy(&video->streaming->ctrl, &probe, sizeof probe); + + /* Return the actual frame period. */ + parm->parm.capture.timeperframe.numerator = probe.dwFrameInterval; + parm->parm.capture.timeperframe.denominator = 10000000; + uvc_simplify_fraction(&parm->parm.capture.timeperframe.numerator, + &parm->parm.capture.timeperframe.denominator, + 8, 333); + + return 0; +} + +/* ------------------------------------------------------------------------ + * Privilege management + */ + +/* + * Privilege management is the multiple-open implementation basis. The current + * implementation is completely transparent for the end-user and doesn't + * require explicit use of the VIDIOC_G_PRIORITY and VIDIOC_S_PRIORITY ioctls. + * Those ioctls enable finer control on the device (by making possible for a + * user to request exclusive access to a device), but are not mature yet. + * Switching to the V4L2 priority mechanism might be considered in the future + * if this situation changes. + * + * Each open instance of a UVC device can either be in a privileged or + * unprivileged state. Only a single instance can be in a privileged state at + * a given time. Trying to perform an operation which requires privileges will + * automatically acquire the required privileges if possible, or return -EBUSY + * otherwise. Privileges are dismissed when closing the instance. + * + * Operations which require privileges are: + * + * - VIDIOC_S_INPUT + * - VIDIOC_S_PARM + * - VIDIOC_S_FMT + * - VIDIOC_TRY_FMT + * - VIDIOC_REQBUFS + */ +static int uvc_acquire_privileges(struct uvc_fh *handle) +{ + int ret = 0; + + /* Always succeed if the handle is already privileged. */ + if (handle->state == UVC_HANDLE_ACTIVE) + return 0; + + /* Check if the device already has a privileged handle. */ + mutex_lock(&uvc_driver.open_mutex); + if (atomic_inc_return(&handle->device->active) != 1) { + atomic_dec(&handle->device->active); + ret = -EBUSY; + goto done; + } + + handle->state = UVC_HANDLE_ACTIVE; + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static void uvc_dismiss_privileges(struct uvc_fh *handle) +{ + if (handle->state == UVC_HANDLE_ACTIVE) + atomic_dec(&handle->device->active); + + handle->state = UVC_HANDLE_PASSIVE; +} + +static int uvc_has_privileges(struct uvc_fh *handle) +{ + return handle->state == UVC_HANDLE_ACTIVE; +} + +/* ------------------------------------------------------------------------ + * V4L2 file operations + */ + +static int uvc_v4l2_open(struct inode *inode, struct file *file) +{ + struct video_device *vdev; + struct uvc_video_device *video; + struct uvc_fh *handle; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_open\n"); + mutex_lock(&uvc_driver.open_mutex); + vdev = video_devdata(file); + video = video_get_drvdata(vdev); + + if (video->dev->state & UVC_DEV_DISCONNECTED) { + ret = -ENODEV; + goto done; + } + + ret = usb_autopm_get_interface(video->dev->intf); + if (ret < 0) + goto done; + + /* Create the device handle. */ + handle = kzalloc(sizeof *handle, GFP_KERNEL); + if (handle == NULL) { + usb_autopm_put_interface(video->dev->intf); + ret = -ENOMEM; + goto done; + } + + handle->device = video; + handle->state = UVC_HANDLE_PASSIVE; + file->private_data = handle; + + kref_get(&video->dev->kref); + +done: + mutex_unlock(&uvc_driver.open_mutex); + return ret; +} + +static int uvc_v4l2_release(struct inode *inode, struct file *file) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_release\n"); + + /* Only free resources if this is a privileged handle. */ + if (uvc_has_privileges(handle)) { + uvc_video_enable(video, 0); + + mutex_lock(&video->queue.mutex); + if (uvc_free_buffers(&video->queue) < 0) + uvc_printk(KERN_ERR, "uvc_v4l2_release: Unable to " + "free buffers.\n"); + mutex_unlock(&video->queue.mutex); + } + + /* Release the file handle. */ + uvc_dismiss_privileges(handle); + kfree(handle); + file->private_data = NULL; + + usb_autopm_put_interface(video->dev->intf); + kref_put(&video->dev->kref, uvc_delete); + return 0; +} + +static int uvc_v4l2_do_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, void *arg) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_fh *handle = (struct uvc_fh *)file->private_data; + int ret = 0; + + if (uvc_trace_param & UVC_TRACE_IOCTL) + v4l_printk_ioctl(cmd); + + switch (cmd) { + /* Query capabilities */ + case VIDIOC_QUERYCAP: + { + struct v4l2_capability *cap = arg; + + memset(cap, 0, sizeof *cap); + strncpy(cap->driver, "uvcvideo", sizeof cap->driver); + strncpy(cap->card, vdev->name, 32); + strncpy(cap->bus_info, video->dev->udev->bus->bus_name, + sizeof cap->bus_info); + cap->version = DRIVER_VERSION_NUMBER; + cap->capabilities = V4L2_CAP_VIDEO_CAPTURE + | V4L2_CAP_STREAMING; + break; + } + + /* Get, Set & Query control */ + case VIDIOC_QUERYCTRL: + return uvc_query_v4l2_ctrl(video, arg); + + case VIDIOC_G_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_get(video, &xctrl); + uvc_ctrl_rollback(video); + if (ret >= 0) + ctrl->value = xctrl.value; + break; + } + + case VIDIOC_S_CTRL: + { + struct v4l2_control *ctrl = arg; + struct v4l2_ext_control xctrl; + + memset(&xctrl, 0, sizeof xctrl); + xctrl.id = ctrl->id; + xctrl.value = ctrl->value; + + uvc_ctrl_begin(video); + ret = uvc_ctrl_set(video, &xctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + return ret; + } + ret = uvc_ctrl_commit(video); + break; + } + + case VIDIOC_QUERYMENU: + return uvc_v4l2_query_menu(video, arg); + + case VIDIOC_G_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + uvc_ctrl_begin(video); + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_get(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + ctrls->error_idx = 0; + ret = uvc_ctrl_rollback(video); + break; + } + + case VIDIOC_S_EXT_CTRLS: + case VIDIOC_TRY_EXT_CTRLS: + { + struct v4l2_ext_controls *ctrls = arg; + struct v4l2_ext_control *ctrl = ctrls->controls; + unsigned int i; + + ret = uvc_ctrl_begin(video); + if (ret < 0) + return ret; + + for (i = 0; i < ctrls->count; ++ctrl, ++i) { + ret = uvc_ctrl_set(video, ctrl); + if (ret < 0) { + uvc_ctrl_rollback(video); + ctrls->error_idx = i; + return ret; + } + } + + ctrls->error_idx = 0; + + if (cmd == VIDIOC_S_EXT_CTRLS) + ret = uvc_ctrl_commit(video); + else + ret = uvc_ctrl_rollback(video); + break; + } + + /* Get, Set & Enum input */ + case VIDIOC_ENUMINPUT: + { + const struct uvc_entity *selector = video->selector; + struct v4l2_input *input = arg; + struct uvc_entity *iterm = NULL; + u32 index = input->index; + int pin = 0; + + if (selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (index != 0) + return -EINVAL; + iterm = list_first_entry(&video->iterms, + struct uvc_entity, chain); + pin = iterm->id; + } else if (pin < selector->selector.bNrInPins) { + pin = selector->selector.baSourceID[index]; + list_for_each_entry(iterm, video->iterms.next, chain) { + if (iterm->id == pin) + break; + } + } + + if (iterm == NULL || iterm->id != pin) + return -EINVAL; + + memset(input, 0, sizeof *input); + input->index = index; + strncpy(input->name, iterm->name, sizeof input->name); + if (UVC_ENTITY_TYPE(iterm) == ITT_CAMERA) + input->type = V4L2_INPUT_TYPE_CAMERA; + break; + } + + case VIDIOC_G_INPUT: + { + u8 input; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + *(int *)arg = 0; + break; + } + + ret = uvc_query_ctrl(video->dev, GET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + if (ret < 0) + return ret; + + *(int *)arg = input - 1; + break; + } + + case VIDIOC_S_INPUT: + { + u8 input = *(u32 *)arg + 1; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + if (video->selector == NULL || + (video->dev->quirks & UVC_QUIRK_IGNORE_SELECTOR_UNIT)) { + if (input != 1) + return -EINVAL; + break; + } + + if (input > video->selector->selector.bNrInPins) + return -EINVAL; + + return uvc_query_ctrl(video->dev, SET_CUR, video->selector->id, + video->dev->intfnum, SU_INPUT_SELECT_CONTROL, + &input, 1); + } + + /* Try, Get, Set & Enum format */ + case VIDIOC_ENUM_FMT: + { + struct v4l2_fmtdesc *fmt = arg; + struct uvc_format *format; + + if (fmt->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + fmt->index >= video->streaming->nformats) + return -EINVAL; + + format = &video->streaming->format[fmt->index]; + fmt->flags = 0; + if (format->flags & UVC_FMT_FLAG_COMPRESSED) + fmt->flags |= V4L2_FMT_FLAG_COMPRESSED; + strncpy(fmt->description, format->name, + sizeof fmt->description); + fmt->description[sizeof fmt->description - 1] = 0; + fmt->pixelformat = format->fcc; + break; + } + + case VIDIOC_TRY_FMT: + { + struct uvc_streaming_control probe; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_try_format(video, arg, &probe, NULL, NULL); + } + + case VIDIOC_S_FMT: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_format(video, arg); + + case VIDIOC_G_FMT: + return uvc_v4l2_get_format(video, arg); + + /* Frame size enumeration */ + case VIDIOC_ENUM_FRAMESIZES: + { + struct v4l2_frmsizeenum *fsize = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame; + int i; + + /* Look for the given pixel format */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fsize->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + if (fsize->index >= format->nframes) + return -EINVAL; + + frame = &format->frame[fsize->index]; + fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE; + fsize->discrete.width = frame->wWidth; + fsize->discrete.height = frame->wHeight; + break; + } + + /* Frame interval enumeration */ + case VIDIOC_ENUM_FRAMEINTERVALS: + { + struct v4l2_frmivalenum *fival = arg; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + int i; + + /* Look for the given pixel format and frame size */ + for (i = 0; i < video->streaming->nformats; i++) { + if (video->streaming->format[i].fcc == + fival->pixel_format) { + format = &video->streaming->format[i]; + break; + } + } + if (format == NULL) + return -EINVAL; + + for (i = 0; i < format->nframes; i++) { + if (format->frame[i].wWidth == fival->width && + format->frame[i].wHeight == fival->height) { + frame = &format->frame[i]; + break; + } + } + if (frame == NULL) + return -EINVAL; + + if (frame->bFrameIntervalType) { + if (fival->index >= frame->bFrameIntervalType) + return -EINVAL; + + fival->type = V4L2_FRMIVAL_TYPE_DISCRETE; + fival->discrete.numerator = + frame->dwFrameInterval[fival->index]; + fival->discrete.denominator = 10000000; + uvc_simplify_fraction(&fival->discrete.numerator, + &fival->discrete.denominator, 8, 333); + } else { + fival->type = V4L2_FRMIVAL_TYPE_STEPWISE; + fival->stepwise.min.numerator = + frame->dwFrameInterval[0]; + fival->stepwise.min.denominator = 10000000; + fival->stepwise.max.numerator = + frame->dwFrameInterval[1]; + fival->stepwise.max.denominator = 10000000; + fival->stepwise.step.numerator = + frame->dwFrameInterval[2]; + fival->stepwise.step.denominator = 10000000; + uvc_simplify_fraction(&fival->stepwise.min.numerator, + &fival->stepwise.min.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.max.numerator, + &fival->stepwise.max.denominator, 8, 333); + uvc_simplify_fraction(&fival->stepwise.step.numerator, + &fival->stepwise.step.denominator, 8, 333); + } + break; + } + + /* Get & Set streaming parameters */ + case VIDIOC_G_PARM: + return uvc_v4l2_get_streamparm(video, arg); + + case VIDIOC_S_PARM: + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + return uvc_v4l2_set_streamparm(video, arg); + + /* Cropping and scaling */ + case VIDIOC_CROPCAP: + { + struct v4l2_cropcap *ccap = arg; + struct uvc_frame *frame = video->streaming->cur_frame; + + if (ccap->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + ccap->bounds.left = 0; + ccap->bounds.top = 0; + ccap->bounds.width = frame->wWidth; + ccap->bounds.height = frame->wHeight; + + ccap->defrect = ccap->bounds; + + ccap->pixelaspect.numerator = 1; + ccap->pixelaspect.denominator = 1; + break; + } + + case VIDIOC_G_CROP: + case VIDIOC_S_CROP: + return -EINVAL; + + /* Buffers & streaming */ + case VIDIOC_REQBUFS: + { + struct v4l2_requestbuffers *rb = arg; + unsigned int bufsize = + video->streaming->ctrl.dwMaxVideoFrameSize; + + if (rb->type != V4L2_BUF_TYPE_VIDEO_CAPTURE || + rb->memory != V4L2_MEMORY_MMAP) + return -EINVAL; + + if ((ret = uvc_acquire_privileges(handle)) < 0) + return ret; + + ret = uvc_alloc_buffers(&video->queue, rb->count, bufsize); + if (ret < 0) + return ret; + + if (!(video->streaming->cur_format->flags & + UVC_FMT_FLAG_COMPRESSED)) + video->queue.flags |= UVC_QUEUE_DROP_INCOMPLETE; + + rb->count = ret; + ret = 0; + break; + } + + case VIDIOC_QUERYBUF: + { + struct v4l2_buffer *buf = arg; + + if (buf->type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_query_buffer(&video->queue, buf); + } + + case VIDIOC_QBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_queue_buffer(&video->queue, arg); + + case VIDIOC_DQBUF: + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_dequeue_buffer(&video->queue, arg, + file->f_flags & O_NONBLOCK); + + case VIDIOC_STREAMON: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + if ((ret = uvc_video_enable(video, 1)) < 0) + return ret; + break; + } + + case VIDIOC_STREAMOFF: + { + int *type = arg; + + if (*type != V4L2_BUF_TYPE_VIDEO_CAPTURE) + return -EINVAL; + + if (!uvc_has_privileges(handle)) + return -EBUSY; + + return uvc_video_enable(video, 0); + } + + /* Analog video standards make no sense for digital cameras. */ + case VIDIOC_ENUMSTD: + case VIDIOC_QUERYSTD: + case VIDIOC_G_STD: + case VIDIOC_S_STD: + + case VIDIOC_OVERLAY: + + case VIDIOC_ENUMAUDIO: + case VIDIOC_ENUMAUDOUT: + + case VIDIOC_ENUMOUTPUT: + uvc_trace(UVC_TRACE_IOCTL, "Unsupported ioctl 0x%08x\n", cmd); + return -EINVAL; + + /* Dynamic controls. */ + case UVCIOC_CTRL_ADD: + { + struct uvc_xu_control_info *xinfo = arg; + struct uvc_control_info *info; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + info = kmalloc(sizeof *info, GFP_KERNEL); + if (info == NULL) + return -ENOMEM; + + memcpy(info->entity, xinfo->entity, sizeof info->entity); + info->index = xinfo->index; + info->selector = xinfo->selector; + info->size = xinfo->size; + info->flags = xinfo->flags; + + info->flags |= UVC_CONTROL_GET_MIN | UVC_CONTROL_GET_MAX | + UVC_CONTROL_GET_RES | UVC_CONTROL_GET_DEF; + + ret = uvc_ctrl_add_info(info); + if (ret < 0) + kfree(info); + break; + } + + case UVCIOC_CTRL_MAP: + { + struct uvc_xu_control_mapping *xmap = arg; + struct uvc_control_mapping *map; + + if (!capable(CAP_SYS_ADMIN)) + return -EPERM; + + map = kmalloc(sizeof *map, GFP_KERNEL); + if (map == NULL) + return -ENOMEM; + + map->id = xmap->id; + memcpy(map->name, xmap->name, sizeof map->name); + memcpy(map->entity, xmap->entity, sizeof map->entity); + map->selector = xmap->selector; + map->size = xmap->size; + map->offset = xmap->offset; + map->v4l2_type = xmap->v4l2_type; + map->data_type = xmap->data_type; + + ret = uvc_ctrl_add_mapping(map); + if (ret < 0) + kfree(map); + break; + } + + case UVCIOC_CTRL_GET: + return uvc_xu_ctrl_query(video, arg, 0); + + case UVCIOC_CTRL_SET: + return uvc_xu_ctrl_query(video, arg, 1); + + default: + if ((ret = v4l_compat_translate_ioctl(inode, file, cmd, arg, + uvc_v4l2_do_ioctl)) == -ENOIOCTLCMD) + uvc_trace(UVC_TRACE_IOCTL, "Unknown ioctl 0x%08x\n", + cmd); + return ret; + } + + return ret; +} + +static int uvc_v4l2_ioctl(struct inode *inode, struct file *file, + unsigned int cmd, unsigned long arg) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_ioctl\n"); + return video_usercopy(inode, file, cmd, arg, uvc_v4l2_do_ioctl); +} + +static ssize_t uvc_v4l2_read(struct file *file, char __user *data, + size_t count, loff_t *ppos) +{ + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_read: not implemented.\n"); + return -ENODEV; +} + +/* + * VMA operations. + */ +static void uvc_vm_open(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count++; +} + +static void uvc_vm_close(struct vm_area_struct *vma) +{ + struct uvc_buffer *buffer = vma->vm_private_data; + buffer->vma_use_count--; +} + +static struct vm_operations_struct uvc_vm_ops = { + .open = uvc_vm_open, + .close = uvc_vm_close, +}; + +static int uvc_v4l2_mmap(struct file *file, struct vm_area_struct *vma) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + struct uvc_buffer *buffer; + struct page *page; + unsigned long addr, start, size; + unsigned int i; + int ret = 0; + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_mmap\n"); + + start = vma->vm_start; + size = vma->vm_end - vma->vm_start; + + mutex_lock(&video->queue.mutex); + + for (i = 0; i < video->queue.count; ++i) { + buffer = &video->queue.buffer[i]; + if ((buffer->buf.m.offset >> PAGE_SHIFT) == vma->vm_pgoff) + break; + } + + if (i == video->queue.count || size != video->queue.buf_size) { + ret = -EINVAL; + goto done; + } + + /* + * VM_IO marks the area as being an mmaped region for I/O to a + * device. It also prevents the region from being core dumped. + */ + vma->vm_flags |= VM_IO; + + addr = (unsigned long)video->queue.mem + buffer->buf.m.offset; + while (size > 0) { + page = vmalloc_to_page((void *)addr); + if ((ret = vm_insert_page(vma, start, page)) < 0) + goto done; + + start += PAGE_SIZE; + addr += PAGE_SIZE; + size -= PAGE_SIZE; + } + + vma->vm_ops = &uvc_vm_ops; + vma->vm_private_data = buffer; + uvc_vm_open(vma); + +done: + mutex_unlock(&video->queue.mutex); + return ret; +} + +static unsigned int uvc_v4l2_poll(struct file *file, poll_table *wait) +{ + struct video_device *vdev = video_devdata(file); + struct uvc_video_device *video = video_get_drvdata(vdev); + + uvc_trace(UVC_TRACE_CALLS, "uvc_v4l2_poll\n"); + + return uvc_queue_poll(&video->queue, file, wait); +} + +struct file_operations uvc_fops = { + .owner = THIS_MODULE, + .open = uvc_v4l2_open, + .release = uvc_v4l2_release, + .ioctl = uvc_v4l2_ioctl, + .compat_ioctl = v4l_compat_ioctl32, + .llseek = no_llseek, + .read = uvc_v4l2_read, + .mmap = uvc_v4l2_mmap, + .poll = uvc_v4l2_poll, +}; diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c new file mode 100644 index 0000000..6faf1fb --- /dev/null +++ b/drivers/media/video/uvc/uvc_video.c @@ -0,0 +1,934 @@ +/* + * uvc_video.c -- USB Video Class driver - Video handling + * + * Copyright (C) 2005-2008 + * Laurent Pinchart (laurent.pinchart@skynet.be) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +#include "uvcvideo.h" + +/* ------------------------------------------------------------------------ + * UVC Controls + */ + +static int __uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size, + int timeout) +{ + __u8 type = USB_TYPE_CLASS | USB_RECIP_INTERFACE; + unsigned int pipe; + int ret; + + pipe = (query & 0x80) ? usb_rcvctrlpipe(dev->udev, 0) + : usb_sndctrlpipe(dev->udev, 0); + type |= (query & 0x80) ? USB_DIR_IN : USB_DIR_OUT; + + ret = usb_control_msg(dev->udev, pipe, query, type, cs << 8, + unit << 8 | intfnum, data, size, timeout); + + if (ret != size) { + uvc_printk(KERN_ERR, "Failed to query (%u) UVC control %u " + "(unit %u) : %d (exp. %u).\n", query, cs, unit, ret, + size); + return -EIO; + } + + return 0; +} + +int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size) +{ + return __uvc_query_ctrl(dev, query, unit, intfnum, cs, data, size, + UVC_CTRL_CONTROL_TIMEOUT); +} + +static void uvc_fixup_buffer_size(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl) +{ + struct uvc_format *format; + struct uvc_frame *frame; + + if (ctrl->bFormatIndex <= 0 || + ctrl->bFormatIndex > video->streaming->nformats) + return; + + format = &video->streaming->format[ctrl->bFormatIndex - 1]; + + if (ctrl->bFrameIndex <= 0 || + ctrl->bFrameIndex > format->nframes) + return; + + frame = &format->frame[ctrl->bFrameIndex - 1]; + + if (!(format->flags & UVC_FMT_FLAG_COMPRESSED) || + (ctrl->dwMaxVideoFrameSize == 0 && + video->dev->uvc_version < 0x0110)) + ctrl->dwMaxVideoFrameSize = + frame->dwMaxVideoFrameBufferSize; +} + +static int uvc_get_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe, __u8 query) +{ + __u8 data[34]; + __u8 size; + int ret; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + ret = __uvc_query_ctrl(video->dev, query, 0, video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); + + if (ret < 0) + return ret; + + ctrl->bmHint = le16_to_cpup((__le16 *)&data[0]); + ctrl->bFormatIndex = data[2]; + ctrl->bFrameIndex = data[3]; + ctrl->dwFrameInterval = le32_to_cpup((__le32 *)&data[4]); + ctrl->wKeyFrameRate = le16_to_cpup((__le16 *)&data[8]); + ctrl->wPFrameRate = le16_to_cpup((__le16 *)&data[10]); + ctrl->wCompQuality = le16_to_cpup((__le16 *)&data[12]); + ctrl->wCompWindowSize = le16_to_cpup((__le16 *)&data[14]); + ctrl->wDelay = le16_to_cpup((__le16 *)&data[16]); + ctrl->dwMaxVideoFrameSize = + le32_to_cpu(get_unaligned((__le32 *)&data[18])); + ctrl->dwMaxPayloadTransferSize = + le32_to_cpu(get_unaligned((__le32 *)&data[22])); + + if (size == 34) { + ctrl->dwClockFrequency = + le32_to_cpu(get_unaligned((__le32 *)&data[26])); + ctrl->bmFramingInfo = data[30]; + ctrl->bPreferedVersion = data[31]; + ctrl->bMinVersion = data[32]; + ctrl->bMaxVersion = data[33]; + } else { + ctrl->dwClockFrequency = video->dev->clock_frequency; + ctrl->bmFramingInfo = 0; + ctrl->bPreferedVersion = 0; + ctrl->bMinVersion = 0; + ctrl->bMaxVersion = 0; + } + + /* Some broken devices return a null or wrong dwMaxVideoFrameSize. + * Try to get the value from the format and frame descriptor. + */ + uvc_fixup_buffer_size(video, ctrl); + + return 0; +} + +int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe) +{ + __u8 data[34]; + __u8 size; + + size = video->dev->uvc_version >= 0x0110 ? 34 : 26; + memset(data, 0, sizeof data); + + *(__le16 *)&data[0] = cpu_to_le16(ctrl->bmHint); + data[2] = ctrl->bFormatIndex; + data[3] = ctrl->bFrameIndex; + *(__le32 *)&data[4] = cpu_to_le32(ctrl->dwFrameInterval); + *(__le16 *)&data[8] = cpu_to_le16(ctrl->wKeyFrameRate); + *(__le16 *)&data[10] = cpu_to_le16(ctrl->wPFrameRate); + *(__le16 *)&data[12] = cpu_to_le16(ctrl->wCompQuality); + *(__le16 *)&data[14] = cpu_to_le16(ctrl->wCompWindowSize); + *(__le16 *)&data[16] = cpu_to_le16(ctrl->wDelay); + /* Note: Some of the fields below are not required for IN devices (see + * UVC spec, 4.3.1.1), but we still copy them in case support for OUT + * devices is added in the future. */ + put_unaligned(cpu_to_le32(ctrl->dwMaxVideoFrameSize), + (__le32 *)&data[18]); + put_unaligned(cpu_to_le32(ctrl->dwMaxPayloadTransferSize), + (__le32 *)&data[22]); + + if (size == 34) { + put_unaligned(cpu_to_le32(ctrl->dwClockFrequency), + (__le32 *)&data[26]); + data[30] = ctrl->bmFramingInfo; + data[31] = ctrl->bPreferedVersion; + data[32] = ctrl->bMinVersion; + data[33] = ctrl->bMaxVersion; + } + + return __uvc_query_ctrl(video->dev, SET_CUR, 0, + video->streaming->intfnum, + probe ? VS_PROBE_CONTROL : VS_COMMIT_CONTROL, &data, size, + UVC_CTRL_STREAMING_TIMEOUT); +} + +int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe) +{ + struct uvc_streaming_control probe_min, probe_max; + __u16 bandwidth; + unsigned int i; + int ret; + + mutex_lock(&video->streaming->mutex); + + /* Perform probing. The device should adjust the requested values + * according to its capabilities. However, some devices, namely the + * first generation UVC Logitech webcams, don't implement the Video + * Probe control properly, and just return the needed bandwidth. For + * that reason, if the needed bandwidth exceeds the maximum available + * bandwidth, try to lower the quality. + */ + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0) + goto done; + + /* Get the minimum and maximum values for compression settings. */ + if (!(video->dev->quirks & UVC_QUIRK_PROBE_MINMAX)) { + ret = uvc_get_video_ctrl(video, &probe_min, 1, GET_MIN); + if (ret < 0) + goto done; + ret = uvc_get_video_ctrl(video, &probe_max, 1, GET_MAX); + if (ret < 0) + goto done; + + probe->wCompQuality = probe_max.wCompQuality; + } + + for (i = 0; i < 2; ++i) { + if ((ret = uvc_set_video_ctrl(video, probe, 1)) < 0 || + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + goto done; + + if (video->streaming->intf->num_altsetting == 1) + break; + + bandwidth = probe->dwMaxPayloadTransferSize; + if (bandwidth <= video->streaming->maxpsize) + break; + + if (video->dev->quirks & UVC_QUIRK_PROBE_MINMAX) { + ret = -ENOSPC; + goto done; + } + + /* TODO: negotiate compression parameters */ + probe->wKeyFrameRate = probe_min.wKeyFrameRate; + probe->wPFrameRate = probe_min.wPFrameRate; + probe->wCompQuality = probe_max.wCompQuality; + probe->wCompWindowSize = probe_min.wCompWindowSize; + } + +done: + mutex_unlock(&video->streaming->mutex); + return ret; +} + +/* ------------------------------------------------------------------------ + * Video codecs + */ + +/* Values for bmHeaderInfo (Video and Still Image Payload Headers, 2.4.3.3) */ +#define UVC_STREAM_EOH (1 << 7) +#define UVC_STREAM_ERR (1 << 6) +#define UVC_STREAM_STI (1 << 5) +#define UVC_STREAM_RES (1 << 4) +#define UVC_STREAM_SCR (1 << 3) +#define UVC_STREAM_PTS (1 << 2) +#define UVC_STREAM_EOF (1 << 1) +#define UVC_STREAM_FID (1 << 0) + +/* Video payload decoding is handled by uvc_video_decode_start(), + * uvc_video_decode_data() and uvc_video_decode_end(). + * + * uvc_video_decode_start is called with URB data at the start of a bulk or + * isochronous payload. It processes header data and returns the header size + * in bytes if successful. If an error occurs, it returns a negative error + * code. The following error codes have special meanings. + * + * - EAGAIN informs the caller that the current video buffer should be marked + * as done, and that the function should be called again with the same data + * and a new video buffer. This is used when end of frame conditions can be + * reliably detected at the beginning of the next frame only. + * + * If an error other than -EAGAIN is returned, the caller will drop the current + * payload. No call to uvc_video_decode_data and uvc_video_decode_end will be + * made until the next payload. -ENODATA can be used to drop the current + * payload if no other error code is appropriate. + * + * uvc_video_decode_data is called for every URB with URB data. It copies the + * data to the video buffer. + * + * uvc_video_decode_end is called with header data at the end of a bulk or + * isochronous payload. It performs any additional header data processing and + * returns 0 or a negative error code if an error occured. As header data have + * already been processed by uvc_video_decode_start, this functions isn't + * required to perform sanity checks a second time. + * + * For isochronous transfers where a payload is always transfered in a single + * URB, the three functions will be called in a row. + * + * To let the decoder process header data and update its internal state even + * when no video buffer is available, uvc_video_decode_start must be prepared + * to be called with a NULL buf parameter. uvc_video_decode_data and + * uvc_video_decode_end will never be called with a NULL buffer. + */ +static int uvc_video_decode_start(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + __u8 fid; + + /* Sanity checks: + * - packet must be at least 2 bytes long + * - bHeaderLength value must be at least 2 bytes (see above) + * - bHeaderLength value can't be larger than the packet size. + */ + if (len < 2 || data[0] < 2 || data[0] > len) + return -EINVAL; + + /* Skip payloads marked with the error bit ("error frames"). */ + if (data[1] & UVC_STREAM_ERR) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (error bit " + "set).\n"); + return -ENODATA; + } + + fid = data[1] & UVC_STREAM_FID; + + /* Store the payload FID bit and return immediately when the buffer is + * NULL. + */ + if (buf == NULL) { + video->last_fid = fid; + return -ENODATA; + } + + /* Synchronize to the input stream by waiting for the FID bit to be + * toggled when the the buffer state is not UVC_BUF_STATE_ACTIVE. + * queue->last_fid is initialized to -1, so the first isochronous + * frame will always be in sync. + * + * If the device doesn't toggle the FID bit, invert video->last_fid + * when the EOF bit is set to force synchronisation on the next packet. + */ + if (buf->state != UVC_BUF_STATE_ACTIVE) { + if (fid == video->last_fid) { + uvc_trace(UVC_TRACE_FRAME, "Dropping payload (out of " + "sync).\n"); + if ((video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) && + (data[1] & UVC_STREAM_EOF)) + video->last_fid ^= UVC_STREAM_FID; + return -ENODATA; + } + + /* TODO: Handle PTS and SCR. */ + buf->state = UVC_BUF_STATE_ACTIVE; + } + + /* Mark the buffer as done if we're at the beginning of a new frame. + * End of frame detection is better implemented by checking the EOF + * bit (FID bit toggling is delayed by one frame compared to the EOF + * bit), but some devices don't set the bit at end of frame (and the + * last payload can be lost anyway). We thus must check if the FID has + * been toggled. + * + * queue->last_fid is initialized to -1, so the first isochronous + * frame will never trigger an end of frame detection. + * + * Empty buffers (bytesused == 0) don't trigger end of frame detection + * as it doesn't make sense to return an empty buffer. This also + * avoids detecting and of frame conditions at FID toggling if the + * previous payload had the EOF bit set. + */ + if (fid != video->last_fid && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (FID bit " + "toggled).\n"); + buf->state = UVC_BUF_STATE_DONE; + return -EAGAIN; + } + + video->last_fid = fid; + + return data[0]; +} + +static void uvc_video_decode_data(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + struct uvc_video_queue *queue = &video->queue; + unsigned int maxlen, nbytes; + void *mem; + + if (len <= 0) + return; + + /* Copy the video data to the buffer. */ + maxlen = buf->buf.length - buf->buf.bytesused; + mem = queue->mem + buf->buf.m.offset + buf->buf.bytesused; + nbytes = min((unsigned int)len, maxlen); + memcpy(mem, data, nbytes); + buf->buf.bytesused += nbytes; + + /* Complete the current frame if the buffer size was exceeded. */ + if (len > maxlen) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (overflow).\n"); + buf->state = UVC_BUF_STATE_DONE; + } +} + +static void uvc_video_decode_end(struct uvc_video_device *video, + struct uvc_buffer *buf, const __u8 *data, int len) +{ + /* Mark the buffer as done if the EOF marker is set. */ + if (data[1] & UVC_STREAM_EOF && buf->buf.bytesused != 0) { + uvc_trace(UVC_TRACE_FRAME, "Frame complete (EOF found).\n"); + if (data[0] == len) + uvc_trace(UVC_TRACE_FRAME, "EOF in empty payload.\n"); + buf->state = UVC_BUF_STATE_DONE; + if (video->dev->quirks & UVC_QUIRK_STREAM_NO_FID) + video->last_fid ^= UVC_STREAM_FID; + } +} + +/* ------------------------------------------------------------------------ + * URB handling + */ + +/* + * Completion handler for video URBs. + */ +static void uvc_video_decode_isoc(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int ret, i; + + for (i = 0; i < urb->number_of_packets; ++i) { + if (urb->iso_frame_desc[i].status < 0) { + uvc_trace(UVC_TRACE_FRAME, "USB isochronous frame " + "lost (%d).\n", urb->iso_frame_desc[i].status); + continue; + } + + /* Decode the payload header. */ + mem = urb->transfer_buffer + urb->iso_frame_desc[i].offset; + do { + ret = uvc_video_decode_start(video, buf, mem, + urb->iso_frame_desc[i].actual_length); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + if (ret < 0) + continue; + + /* Decode the payload data. */ + uvc_video_decode_data(video, buf, mem + ret, + urb->iso_frame_desc[i].actual_length - ret); + + /* Process the header again. */ + uvc_video_decode_end(video, buf, mem, ret); + + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } +} + +static void uvc_video_decode_bulk(struct urb *urb, + struct uvc_video_device *video, struct uvc_buffer *buf) +{ + u8 *mem; + int len, ret; + + mem = urb->transfer_buffer; + len = urb->actual_length; + video->bulk.payload_size += len; + + /* If the URB is the first of its payload, decode and save the + * header. + */ + if (video->bulk.header_size == 0) { + do { + ret = uvc_video_decode_start(video, buf, mem, len); + if (ret == -EAGAIN) + buf = uvc_queue_next_buffer(&video->queue, buf); + } while (ret == -EAGAIN); + + /* If an error occured skip the rest of the payload. */ + if (ret < 0 || buf == NULL) { + video->bulk.skip_payload = 1; + return; + } + + video->bulk.header_size = ret; + memcpy(video->bulk.header, mem, video->bulk.header_size); + + mem += ret; + len -= ret; + } + + /* The buffer queue might have been cancelled while a bulk transfer + * was in progress, so we can reach here with buf equal to NULL. Make + * sure buf is never dereferenced if NULL. + */ + + /* Process video data. */ + if (!video->bulk.skip_payload && buf != NULL) + uvc_video_decode_data(video, buf, mem, len); + + /* Detect the payload end by a URB smaller than the maximum size (or + * a payload size equal to the maximum) and process the header again. + */ + if (urb->actual_length < urb->transfer_buffer_length || + video->bulk.payload_size >= video->bulk.max_payload_size) { + if (!video->bulk.skip_payload && buf != NULL) { + uvc_video_decode_end(video, buf, video->bulk.header, + video->bulk.header_size); + if (buf->state == UVC_BUF_STATE_DONE || + buf->state == UVC_BUF_STATE_ERROR) + buf = uvc_queue_next_buffer(&video->queue, buf); + } + + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + } +} + +static void uvc_video_complete(struct urb *urb) +{ + struct uvc_video_device *video = urb->context; + struct uvc_video_queue *queue = &video->queue; + struct uvc_buffer *buf = NULL; + unsigned long flags; + int ret; + + switch (urb->status) { + case 0: + break; + + default: + uvc_printk(KERN_WARNING, "Non-zero status (%d) in video " + "completion handler.\n", urb->status); + + case -ENOENT: /* usb_kill_urb() called. */ + if (video->frozen) + return; + + case -ECONNRESET: /* usb_unlink_urb() called. */ + case -ESHUTDOWN: /* The endpoint is being disabled. */ + uvc_queue_cancel(queue, urb->status == -ESHUTDOWN); + return; + } + + spin_lock_irqsave(&queue->irqlock, flags); + if (!list_empty(&queue->irqqueue)) + buf = list_first_entry(&queue->irqqueue, struct uvc_buffer, + queue); + spin_unlock_irqrestore(&queue->irqlock, flags); + + video->decode(urb, video, buf); + + if ((ret = usb_submit_urb(urb, GFP_ATOMIC)) < 0) { + uvc_printk(KERN_ERR, "Failed to resubmit video URB (%d).\n", + ret); + } +} + +/* + * Uninitialize isochronous/bulk URBs and free transfer buffers. + */ +static void uvc_uninit_video(struct uvc_video_device *video) +{ + struct urb *urb; + unsigned int i; + + for (i = 0; i < UVC_URBS; ++i) { + if ((urb = video->urb[i]) == NULL) + continue; + + usb_kill_urb(urb); + /* urb->transfer_buffer_length is not touched by USB core, so + * we can use it here as the buffer length. + */ + if (video->urb_buffer[i]) { + usb_buffer_free(video->dev->udev, + urb->transfer_buffer_length, + video->urb_buffer[i], urb->transfer_dma); + video->urb_buffer[i] = NULL; + } + + usb_free_urb(urb); + video->urb[i] = NULL; + } +} + +/* + * Initialize isochronous URBs and allocate transfer buffers. The packet size + * is given by the endpoint. + */ +static int uvc_init_video_isoc(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int npackets, i, j; + __u16 psize; + __u32 size; + + /* Compute the number of isochronous packets to allocate by dividing + * the maximum video frame size by the packet size. Limit the result + * to UVC_MAX_ISO_PACKETS. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + + size = video->streaming->ctrl.dwMaxVideoFrameSize; + if (size > UVC_MAX_FRAME_SIZE) + return -EINVAL; + + npackets = (size + psize - 1) / psize; + if (npackets > UVC_MAX_ISO_PACKETS) + npackets = UVC_MAX_ISO_PACKETS; + + size = npackets * psize; + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(npackets, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + urb->dev = video->dev->udev; + urb->context = video; + urb->pipe = usb_rcvisocpipe(video->dev->udev, + ep->desc.bEndpointAddress); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = ep->desc.bInterval; + urb->transfer_buffer = video->urb_buffer[i]; + urb->complete = uvc_video_complete; + urb->number_of_packets = npackets; + urb->transfer_buffer_length = size; + + for (j = 0; j < npackets; ++j) { + urb->iso_frame_desc[j].offset = j * psize; + urb->iso_frame_desc[j].length = psize; + } + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize bulk URBs and allocate transfer buffers. The packet size is + * given by the endpoint. + */ +static int uvc_init_video_bulk(struct uvc_video_device *video, + struct usb_host_endpoint *ep) +{ + struct urb *urb; + unsigned int pipe, i; + __u16 psize; + __u32 size; + + /* Compute the bulk URB size. Some devices set the maximum payload + * size to a value too high for memory-constrained devices. We must + * then transfer the payload accross multiple URBs. To be consistant + * with isochronous mode, allocate maximum UVC_MAX_ISO_PACKETS per bulk + * URB. + */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize) & 0x07ff; + size = video->streaming->ctrl.dwMaxPayloadTransferSize; + video->bulk.max_payload_size = size; + if (size > psize * UVC_MAX_ISO_PACKETS) + size = psize * UVC_MAX_ISO_PACKETS; + + pipe = usb_rcvbulkpipe(video->dev->udev, ep->desc.bEndpointAddress); + + for (i = 0; i < UVC_URBS; ++i) { + urb = usb_alloc_urb(0, GFP_KERNEL); + if (urb == NULL) { + uvc_uninit_video(video); + return -ENOMEM; + } + + video->urb_buffer[i] = usb_buffer_alloc(video->dev->udev, + size, GFP_KERNEL, &urb->transfer_dma); + if (video->urb_buffer[i] == NULL) { + usb_free_urb(urb); + uvc_uninit_video(video); + return -ENOMEM; + } + + usb_fill_bulk_urb(urb, video->dev->udev, pipe, + video->urb_buffer[i], size, uvc_video_complete, + video); + urb->transfer_flags = URB_NO_TRANSFER_DMA_MAP; + + video->urb[i] = urb; + } + + return 0; +} + +/* + * Initialize isochronous/bulk URBs and allocate transfer buffers. + */ +static int uvc_init_video(struct uvc_video_device *video) +{ + struct usb_interface *intf = video->streaming->intf; + struct usb_host_interface *alts; + struct usb_host_endpoint *ep = NULL; + int intfnum = video->streaming->intfnum; + unsigned int bandwidth, psize, i; + int ret; + + video->last_fid = -1; + video->bulk.header_size = 0; + video->bulk.skip_payload = 0; + video->bulk.payload_size = 0; + + if (intf->num_altsetting > 1) { + /* Isochronous endpoint, select the alternate setting. */ + bandwidth = video->streaming->ctrl.dwMaxPayloadTransferSize; + + if (bandwidth == 0) { + uvc_printk(KERN_WARNING, "device %s requested null " + "bandwidth, defaulting to lowest.\n", + video->vdev->name); + bandwidth = 1; + } + + for (i = 0; i < intf->num_altsetting; ++i) { + alts = &intf->altsetting[i]; + ep = uvc_find_endpoint(alts, + video->streaming->header.bEndpointAddress); + if (ep == NULL) + continue; + + /* Check if the bandwidth is high enough. */ + psize = le16_to_cpu(ep->desc.wMaxPacketSize); + psize = (psize & 0x07ff) * (1 + ((psize >> 11) & 3)); + if (psize >= bandwidth) + break; + } + + if (i >= intf->num_altsetting) + return -EIO; + + if ((ret = usb_set_interface(video->dev->udev, intfnum, i)) < 0) + return ret; + + ret = uvc_init_video_isoc(video, ep); + } else { + /* Bulk endpoint, proceed to URB initialization. */ + ep = uvc_find_endpoint(&intf->altsetting[0], + video->streaming->header.bEndpointAddress); + if (ep == NULL) + return -EIO; + + ret = uvc_init_video_bulk(video, ep); + } + + if (ret < 0) + return ret; + + /* Submit the URBs. */ + for (i = 0; i < UVC_URBS; ++i) { + if ((ret = usb_submit_urb(video->urb[i], GFP_KERNEL)) < 0) { + uvc_printk(KERN_ERR, "Failed to submit URB %u " + "(%d).\n", i, ret); + uvc_uninit_video(video); + return ret; + } + } + + return 0; +} + +/* -------------------------------------------------------------------------- + * Suspend/resume + */ + +/* + * Stop streaming without disabling the video queue. + * + * To let userspace applications resume without trouble, we must not touch the + * video buffers in any way. We mark the device as frozen to make sure the URB + * completion handler won't try to cancel the queue when we kill the URBs. + */ +int uvc_video_suspend(struct uvc_video_device *video) +{ + if (!uvc_queue_streaming(&video->queue)) + return 0; + + video->frozen = 1; + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + return 0; +} + +/* + * Reconfigure the video interface and restart streaming if it was enable + * before suspend. + * + * If an error occurs, disable the video queue. This will wake all pending + * buffers, making sure userspace applications are notified of the problem + * instead of waiting forever. + */ +int uvc_video_resume(struct uvc_video_device *video) +{ + int ret; + + video->frozen = 0; + + if ((ret = uvc_set_video_ctrl(video, &video->streaming->ctrl, 0)) < 0) { + uvc_queue_enable(&video->queue, 0); + return ret; + } + + if (!uvc_queue_streaming(&video->queue)) + return 0; + + if ((ret = uvc_init_video(video)) < 0) + uvc_queue_enable(&video->queue, 0); + + return ret; +} + +/* ------------------------------------------------------------------------ + * Video device + */ + +/* + * Initialize the UVC video device by retrieving the default format and + * committing it. + * + * Some cameras (namely the Fuji Finepix) set the format and frame + * indexes to zero. The UVC standard doesn't clearly make this a spec + * violation, so try to silently fix the values if possible. + * + * This function is called before registering the device with V4L. + */ +int uvc_video_init(struct uvc_video_device *video) +{ + struct uvc_streaming_control *probe = &video->streaming->ctrl; + struct uvc_format *format = NULL; + struct uvc_frame *frame = NULL; + unsigned int i; + int ret; + + if (video->streaming->nformats == 0) { + uvc_printk(KERN_INFO, "No supported video formats found.\n"); + return -EINVAL; + } + + /* Alternate setting 0 should be the default, yet the XBox Live Vision + * Cam (and possibly other devices) crash or otherwise misbehave if + * they don't receive a SET_INTERFACE request before any other video + * control request. + */ + usb_set_interface(video->dev->udev, video->streaming->intfnum, 0); + + /* Some webcams don't suport GET_DEF request on the probe control. We + * fall back to GET_CUR if GET_DEF fails. + */ + if ((ret = uvc_get_video_ctrl(video, probe, 1, GET_DEF)) < 0 && + (ret = uvc_get_video_ctrl(video, probe, 1, GET_CUR)) < 0) + return ret; + + /* Check if the default format descriptor exists. Use the first + * available format otherwise. + */ + for (i = video->streaming->nformats; i > 0; --i) { + format = &video->streaming->format[i-1]; + if (format->index == probe->bFormatIndex) + break; + } + + if (format->nframes == 0) { + uvc_printk(KERN_INFO, "No frame descriptor found for the " + "default format.\n"); + return -EINVAL; + } + + /* Zero bFrameIndex might be correct. Stream-based formats (including + * MPEG-2 TS and DV) do not support frames but have a dummy frame + * descriptor with bFrameIndex set to zero. If the default frame + * descriptor is not found, use the first avalable frame. + */ + for (i = format->nframes; i > 0; --i) { + frame = &format->frame[i-1]; + if (frame->bFrameIndex == probe->bFrameIndex) + break; + } + + /* Commit the default settings. */ + probe->bFormatIndex = format->index; + probe->bFrameIndex = frame->bFrameIndex; + if ((ret = uvc_set_video_ctrl(video, probe, 0)) < 0) + return ret; + + video->streaming->cur_format = format; + video->streaming->cur_frame = frame; + atomic_set(&video->active, 0); + + /* Select the video decoding function */ + if (video->dev->quirks & UVC_QUIRK_BUILTIN_ISIGHT) + video->decode = uvc_video_decode_isight; + else if (video->streaming->intf->num_altsetting > 1) + video->decode = uvc_video_decode_isoc; + else + video->decode = uvc_video_decode_bulk; + + return 0; +} + +/* + * Enable or disable the video stream. + */ +int uvc_video_enable(struct uvc_video_device *video, int enable) +{ + int ret; + + if (!enable) { + uvc_uninit_video(video); + usb_set_interface(video->dev->udev, + video->streaming->intfnum, 0); + uvc_queue_enable(&video->queue, 0); + return 0; + } + + if ((ret = uvc_queue_enable(&video->queue, 1)) < 0) + return ret; + + return uvc_init_video(video); +} diff --git a/drivers/media/video/uvc/uvcvideo.h b/drivers/media/video/uvc/uvcvideo.h new file mode 100644 index 0000000..a995a78 --- /dev/null +++ b/drivers/media/video/uvc/uvcvideo.h @@ -0,0 +1,796 @@ +#ifndef _USB_VIDEO_H_ +#define _USB_VIDEO_H_ + +#include +#include + + +/* + * Dynamic controls + */ + +/* Data types for UVC control data */ +#define UVC_CTRL_DATA_TYPE_RAW 0 +#define UVC_CTRL_DATA_TYPE_SIGNED 1 +#define UVC_CTRL_DATA_TYPE_UNSIGNED 2 +#define UVC_CTRL_DATA_TYPE_BOOLEAN 3 +#define UVC_CTRL_DATA_TYPE_ENUM 4 +#define UVC_CTRL_DATA_TYPE_BITMASK 5 + +/* Control flags */ +#define UVC_CONTROL_SET_CUR (1 << 0) +#define UVC_CONTROL_GET_CUR (1 << 1) +#define UVC_CONTROL_GET_MIN (1 << 2) +#define UVC_CONTROL_GET_MAX (1 << 3) +#define UVC_CONTROL_GET_RES (1 << 4) +#define UVC_CONTROL_GET_DEF (1 << 5) +/* Control should be saved at suspend and restored at resume. */ +#define UVC_CONTROL_RESTORE (1 << 6) +/* Control can be updated by the camera. */ +#define UVC_CONTROL_AUTO_UPDATE (1 << 7) + +#define UVC_CONTROL_GET_RANGE (UVC_CONTROL_GET_CUR | UVC_CONTROL_GET_MIN | \ + UVC_CONTROL_GET_MAX | UVC_CONTROL_GET_RES | \ + UVC_CONTROL_GET_DEF) + +struct uvc_xu_control_info { + __u8 entity[16]; + __u8 index; + __u8 selector; + __u16 size; + __u32 flags; +}; + +struct uvc_xu_control_mapping { + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; +}; + +struct uvc_xu_control { + __u8 unit; + __u8 selector; + __u16 size; + __u8 __user *data; +}; + +#define UVCIOC_CTRL_ADD _IOW('U', 1, struct uvc_xu_control_info) +#define UVCIOC_CTRL_MAP _IOWR('U', 2, struct uvc_xu_control_mapping) +#define UVCIOC_CTRL_GET _IOWR('U', 3, struct uvc_xu_control) +#define UVCIOC_CTRL_SET _IOW('U', 4, struct uvc_xu_control) + +#ifdef __KERNEL__ + +#include + +/* -------------------------------------------------------------------------- + * UVC constants + */ + +#define SC_UNDEFINED 0x00 +#define SC_VIDEOCONTROL 0x01 +#define SC_VIDEOSTREAMING 0x02 +#define SC_VIDEO_INTERFACE_COLLECTION 0x03 + +#define PC_PROTOCOL_UNDEFINED 0x00 + +#define CS_UNDEFINED 0x20 +#define CS_DEVICE 0x21 +#define CS_CONFIGURATION 0x22 +#define CS_STRING 0x23 +#define CS_INTERFACE 0x24 +#define CS_ENDPOINT 0x25 + +/* VideoControl class specific interface descriptor */ +#define VC_DESCRIPTOR_UNDEFINED 0x00 +#define VC_HEADER 0x01 +#define VC_INPUT_TERMINAL 0x02 +#define VC_OUTPUT_TERMINAL 0x03 +#define VC_SELECTOR_UNIT 0x04 +#define VC_PROCESSING_UNIT 0x05 +#define VC_EXTENSION_UNIT 0x06 + +/* VideoStreaming class specific interface descriptor */ +#define VS_UNDEFINED 0x00 +#define VS_INPUT_HEADER 0x01 +#define VS_OUTPUT_HEADER 0x02 +#define VS_STILL_IMAGE_FRAME 0x03 +#define VS_FORMAT_UNCOMPRESSED 0x04 +#define VS_FRAME_UNCOMPRESSED 0x05 +#define VS_FORMAT_MJPEG 0x06 +#define VS_FRAME_MJPEG 0x07 +#define VS_FORMAT_MPEG2TS 0x0a +#define VS_FORMAT_DV 0x0c +#define VS_COLORFORMAT 0x0d +#define VS_FORMAT_FRAME_BASED 0x10 +#define VS_FRAME_FRAME_BASED 0x11 +#define VS_FORMAT_STREAM_BASED 0x12 + +/* Endpoint type */ +#define EP_UNDEFINED 0x00 +#define EP_GENERAL 0x01 +#define EP_ENDPOINT 0x02 +#define EP_INTERRUPT 0x03 + +/* Request codes */ +#define RC_UNDEFINED 0x00 +#define SET_CUR 0x01 +#define GET_CUR 0x81 +#define GET_MIN 0x82 +#define GET_MAX 0x83 +#define GET_RES 0x84 +#define GET_LEN 0x85 +#define GET_INFO 0x86 +#define GET_DEF 0x87 + +/* VideoControl interface controls */ +#define VC_CONTROL_UNDEFINED 0x00 +#define VC_VIDEO_POWER_MODE_CONTROL 0x01 +#define VC_REQUEST_ERROR_CODE_CONTROL 0x02 + +/* Terminal controls */ +#define TE_CONTROL_UNDEFINED 0x00 + +/* Selector Unit controls */ +#define SU_CONTROL_UNDEFINED 0x00 +#define SU_INPUT_SELECT_CONTROL 0x01 + +/* Camera Terminal controls */ +#define CT_CONTROL_UNDEFINED 0x00 +#define CT_SCANNING_MODE_CONTROL 0x01 +#define CT_AE_MODE_CONTROL 0x02 +#define CT_AE_PRIORITY_CONTROL 0x03 +#define CT_EXPOSURE_TIME_ABSOLUTE_CONTROL 0x04 +#define CT_EXPOSURE_TIME_RELATIVE_CONTROL 0x05 +#define CT_FOCUS_ABSOLUTE_CONTROL 0x06 +#define CT_FOCUS_RELATIVE_CONTROL 0x07 +#define CT_FOCUS_AUTO_CONTROL 0x08 +#define CT_IRIS_ABSOLUTE_CONTROL 0x09 +#define CT_IRIS_RELATIVE_CONTROL 0x0a +#define CT_ZOOM_ABSOLUTE_CONTROL 0x0b +#define CT_ZOOM_RELATIVE_CONTROL 0x0c +#define CT_PANTILT_ABSOLUTE_CONTROL 0x0d +#define CT_PANTILT_RELATIVE_CONTROL 0x0e +#define CT_ROLL_ABSOLUTE_CONTROL 0x0f +#define CT_ROLL_RELATIVE_CONTROL 0x10 +#define CT_PRIVACY_CONTROL 0x11 + +/* Processing Unit controls */ +#define PU_CONTROL_UNDEFINED 0x00 +#define PU_BACKLIGHT_COMPENSATION_CONTROL 0x01 +#define PU_BRIGHTNESS_CONTROL 0x02 +#define PU_CONTRAST_CONTROL 0x03 +#define PU_GAIN_CONTROL 0x04 +#define PU_POWER_LINE_FREQUENCY_CONTROL 0x05 +#define PU_HUE_CONTROL 0x06 +#define PU_SATURATION_CONTROL 0x07 +#define PU_SHARPNESS_CONTROL 0x08 +#define PU_GAMMA_CONTROL 0x09 +#define PU_WHITE_BALANCE_TEMPERATURE_CONTROL 0x0a +#define PU_WHITE_BALANCE_TEMPERATURE_AUTO_CONTROL 0x0b +#define PU_WHITE_BALANCE_COMPONENT_CONTROL 0x0c +#define PU_WHITE_BALANCE_COMPONENT_AUTO_CONTROL 0x0d +#define PU_DIGITAL_MULTIPLIER_CONTROL 0x0e +#define PU_DIGITAL_MULTIPLIER_LIMIT_CONTROL 0x0f +#define PU_HUE_AUTO_CONTROL 0x10 +#define PU_ANALOG_VIDEO_STANDARD_CONTROL 0x11 +#define PU_ANALOG_LOCK_STATUS_CONTROL 0x12 + +#define LXU_MOTOR_PANTILT_RELATIVE_CONTROL 0x01 +#define LXU_MOTOR_PANTILT_RESET_CONTROL 0x02 +#define LXU_MOTOR_FOCUS_MOTOR_CONTROL 0x03 + +/* VideoStreaming interface controls */ +#define VS_CONTROL_UNDEFINED 0x00 +#define VS_PROBE_CONTROL 0x01 +#define VS_COMMIT_CONTROL 0x02 +#define VS_STILL_PROBE_CONTROL 0x03 +#define VS_STILL_COMMIT_CONTROL 0x04 +#define VS_STILL_IMAGE_TRIGGER_CONTROL 0x05 +#define VS_STREAM_ERROR_CODE_CONTROL 0x06 +#define VS_GENERATE_KEY_FRAME_CONTROL 0x07 +#define VS_UPDATE_FRAME_SEGMENT_CONTROL 0x08 +#define VS_SYNC_DELAY_CONTROL 0x09 + +#define TT_VENDOR_SPECIFIC 0x0100 +#define TT_STREAMING 0x0101 + +/* Input Terminal types */ +#define ITT_VENDOR_SPECIFIC 0x0200 +#define ITT_CAMERA 0x0201 +#define ITT_MEDIA_TRANSPORT_INPUT 0x0202 + +/* Output Terminal types */ +#define OTT_VENDOR_SPECIFIC 0x0300 +#define OTT_DISPLAY 0x0301 +#define OTT_MEDIA_TRANSPORT_OUTPUT 0x0302 + +/* External Terminal types */ +#define EXTERNAL_VENDOR_SPECIFIC 0x0400 +#define COMPOSITE_CONNECTOR 0x0401 +#define SVIDEO_CONNECTOR 0x0402 +#define COMPONENT_CONNECTOR 0x0403 + +#define UVC_TERM_INPUT 0x0000 +#define UVC_TERM_OUTPUT 0x8000 + +#define UVC_ENTITY_TYPE(entity) ((entity)->type & 0x7fff) +#define UVC_ENTITY_IS_UNIT(entity) (((entity)->type & 0xff00) == 0) +#define UVC_ENTITY_IS_TERM(entity) (((entity)->type & 0xff00) != 0) +#define UVC_ENTITY_IS_ITERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_INPUT) +#define UVC_ENTITY_IS_OTERM(entity) \ + (((entity)->type & 0x8000) == UVC_TERM_OUTPUT) + +#define UVC_STATUS_TYPE_CONTROL 1 +#define UVC_STATUS_TYPE_STREAMING 2 + +/* ------------------------------------------------------------------------ + * GUIDs + */ +#define UVC_GUID_UVC_CAMERA \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} +#define UVC_GUID_UVC_OUTPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02} +#define UVC_GUID_UVC_MEDIA_TRANSPORT_INPUT \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03} +#define UVC_GUID_UVC_PROCESSING \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01} +#define UVC_GUID_UVC_SELECTOR \ + {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \ + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x02} + +#define UVC_GUID_LOGITECH_DEV_INFO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1e} +#define UVC_GUID_LOGITECH_USER_HW \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x1f} +#define UVC_GUID_LOGITECH_VIDEO \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x50} +#define UVC_GUID_LOGITECH_MOTOR \ + {0x82, 0x06, 0x61, 0x63, 0x70, 0x50, 0xab, 0x49, \ + 0xb8, 0xcc, 0xb3, 0x85, 0x5e, 0x8d, 0x22, 0x56} + +#define UVC_GUID_FORMAT_MJPEG \ + { 'M', 'J', 'P', 'G', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YUY2 \ + { 'Y', 'U', 'Y', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_NV12 \ + { 'N', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_YV12 \ + { 'Y', 'V', '1', '2', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_I420 \ + { 'I', '4', '2', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_UYVY \ + { 'U', 'Y', 'V', 'Y', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_Y800 \ + { 'Y', '8', '0', '0', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} +#define UVC_GUID_FORMAT_BY8 \ + { 'B', 'Y', '8', ' ', 0x00, 0x00, 0x10, 0x00, \ + 0x80, 0x00, 0x00, 0xaa, 0x00, 0x38, 0x9b, 0x71} + + +/* ------------------------------------------------------------------------ + * Driver specific constants. + */ + +#define DRIVER_VERSION_NUMBER KERNEL_VERSION(0, 1, 0) + +/* Number of isochronous URBs. */ +#define UVC_URBS 5 +/* Maximum number of packets per isochronous URB. */ +#define UVC_MAX_ISO_PACKETS 40 +/* Maximum frame size in bytes, for sanity checking. */ +#define UVC_MAX_FRAME_SIZE (16*1024*1024) +/* Maximum number of video buffers. */ +#define UVC_MAX_VIDEO_BUFFERS 32 + +#define UVC_CTRL_CONTROL_TIMEOUT 300 +#define UVC_CTRL_STREAMING_TIMEOUT 1000 + +/* Devices quirks */ +#define UVC_QUIRK_STATUS_INTERVAL 0x00000001 +#define UVC_QUIRK_PROBE_MINMAX 0x00000002 +#define UVC_QUIRK_PROBE_EXTRAFIELDS 0x00000004 +#define UVC_QUIRK_BUILTIN_ISIGHT 0x00000008 +#define UVC_QUIRK_STREAM_NO_FID 0x00000010 +#define UVC_QUIRK_IGNORE_SELECTOR_UNIT 0x00000020 + +/* Format flags */ +#define UVC_FMT_FLAG_COMPRESSED 0x00000001 +#define UVC_FMT_FLAG_STREAM 0x00000002 + +/* ------------------------------------------------------------------------ + * Structures. + */ + +struct uvc_device; + +/* TODO: Put the most frequently accessed fields at the beginning of + * structures to maximize cache efficiency. + */ +struct uvc_streaming_control { + __u16 bmHint; + __u8 bFormatIndex; + __u8 bFrameIndex; + __u32 dwFrameInterval; + __u16 wKeyFrameRate; + __u16 wPFrameRate; + __u16 wCompQuality; + __u16 wCompWindowSize; + __u16 wDelay; + __u32 dwMaxVideoFrameSize; + __u32 dwMaxPayloadTransferSize; + __u32 dwClockFrequency; + __u8 bmFramingInfo; + __u8 bPreferedVersion; + __u8 bMinVersion; + __u8 bMaxVersion; +}; + +struct uvc_menu_info { + __u32 value; + __u8 name[32]; +}; + +struct uvc_control_info { + struct list_head list; + struct list_head mappings; + + __u8 entity[16]; + __u8 index; + __u8 selector; + + __u16 size; + __u32 flags; +}; + +struct uvc_control_mapping { + struct list_head list; + + struct uvc_control_info *ctrl; + + __u32 id; + __u8 name[32]; + __u8 entity[16]; + __u8 selector; + + __u8 size; + __u8 offset; + enum v4l2_ctrl_type v4l2_type; + __u32 data_type; + + struct uvc_menu_info *menu_info; + __u32 menu_count; +}; + +struct uvc_control { + struct uvc_entity *entity; + struct uvc_control_info *info; + + __u8 index; /* Used to match the uvc_control entry with a + uvc_control_info. */ + __u8 dirty : 1, + loaded : 1, + modified : 1; + + __u8 *data; +}; + +struct uvc_format_desc { + char *name; + __u8 guid[16]; + __u32 fcc; +}; + +/* The term 'entity' refers to both UVC units and UVC terminals. + * + * The type field is either the terminal type (wTerminalType in the terminal + * descriptor), or the unit type (bDescriptorSubtype in the unit descriptor). + * As the bDescriptorSubtype field is one byte long, the type value will + * always have a null MSB for units. All terminal types defined by the UVC + * specification have a non-null MSB, so it is safe to use the MSB to + * differentiate between units and terminals as long as the descriptor parsing + * code makes sure terminal types have a non-null MSB. + * + * For terminals, the type's most significant bit stores the terminal + * direction (either UVC_TERM_INPUT or UVC_TERM_OUTPUT). The type field should + * always be accessed with the UVC_ENTITY_* macros and never directly. + */ + +struct uvc_entity { + struct list_head list; /* Entity as part of a UVC device. */ + struct list_head chain; /* Entity as part of a video device + * chain. */ + __u8 id; + __u16 type; + char name[64]; + + union { + struct { + __u16 wObjectiveFocalLengthMin; + __u16 wObjectiveFocalLengthMax; + __u16 wOcularFocalLength; + __u8 bControlSize; + __u8 *bmControls; + } camera; + + struct { + __u8 bControlSize; + __u8 *bmControls; + __u8 bTransportModeSize; + __u8 *bmTransportModes; + } media; + + struct { + __u8 bSourceID; + } output; + + struct { + __u8 bSourceID; + __u16 wMaxMultiplier; + __u8 bControlSize; + __u8 *bmControls; + __u8 bmVideoStandards; + } processing; + + struct { + __u8 bNrInPins; + __u8 *baSourceID; + } selector; + + struct { + __u8 guidExtensionCode[16]; + __u8 bNumControls; + __u8 bNrInPins; + __u8 *baSourceID; + __u8 bControlSize; + __u8 *bmControls; + __u8 *bmControlsType; + } extension; + }; + + unsigned int ncontrols; + struct uvc_control *controls; +}; + +struct uvc_frame { + __u8 bFrameIndex; + __u8 bmCapabilities; + __u16 wWidth; + __u16 wHeight; + __u32 dwMinBitRate; + __u32 dwMaxBitRate; + __u32 dwMaxVideoFrameBufferSize; + __u8 bFrameIntervalType; + __u32 dwDefaultFrameInterval; + __u32 *dwFrameInterval; +}; + +struct uvc_format { + __u8 type; + __u8 index; + __u8 bpp; + __u8 colorspace; + __u32 fcc; + __u32 flags; + + char name[32]; + + unsigned int nframes; + struct uvc_frame *frame; +}; + +struct uvc_streaming_header { + __u8 bNumFormats; + __u8 bEndpointAddress; + __u8 bTerminalLink; + __u8 bControlSize; + __u8 *bmaControls; + /* The following fields are used by input headers only. */ + __u8 bmInfo; + __u8 bStillCaptureMethod; + __u8 bTriggerSupport; + __u8 bTriggerUsage; +}; + +struct uvc_streaming { + struct list_head list; + + struct usb_interface *intf; + int intfnum; + __u16 maxpsize; + + struct uvc_streaming_header header; + + unsigned int nformats; + struct uvc_format *format; + + struct uvc_streaming_control ctrl; + struct uvc_format *cur_format; + struct uvc_frame *cur_frame; + + struct mutex mutex; +}; + +enum uvc_buffer_state { + UVC_BUF_STATE_IDLE = 0, + UVC_BUF_STATE_QUEUED = 1, + UVC_BUF_STATE_ACTIVE = 2, + UVC_BUF_STATE_DONE = 3, + UVC_BUF_STATE_ERROR = 4, +}; + +struct uvc_buffer { + unsigned long vma_use_count; + struct list_head stream; + + /* Touched by interrupt handler. */ + struct v4l2_buffer buf; + struct list_head queue; + wait_queue_head_t wait; + enum uvc_buffer_state state; +}; + +#define UVC_QUEUE_STREAMING (1 << 0) +#define UVC_QUEUE_DISCONNECTED (1 << 1) +#define UVC_QUEUE_DROP_INCOMPLETE (1 << 2) + +struct uvc_video_queue { + void *mem; + unsigned int flags; + __u32 sequence; + + unsigned int count; + unsigned int buf_size; + struct uvc_buffer buffer[UVC_MAX_VIDEO_BUFFERS]; + struct mutex mutex; /* protects buffers and mainqueue */ + spinlock_t irqlock; /* protects irqqueue */ + + struct list_head mainqueue; + struct list_head irqqueue; +}; + +struct uvc_video_device { + struct uvc_device *dev; + struct video_device *vdev; + atomic_t active; + unsigned int frozen : 1; + + struct list_head iterms; + struct uvc_entity *oterm; + struct uvc_entity *processing; + struct uvc_entity *selector; + struct list_head extensions; + struct mutex ctrl_mutex; + + struct uvc_video_queue queue; + + /* Video streaming object, must always be non-NULL. */ + struct uvc_streaming *streaming; + + void (*decode) (struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + + /* Context data used by the bulk completion handler. */ + struct { + __u8 header[256]; + unsigned int header_size; + int skip_payload; + __u32 payload_size; + __u32 max_payload_size; + } bulk; + + struct urb *urb[UVC_URBS]; + char *urb_buffer[UVC_URBS]; + + __u8 last_fid; +}; + +enum uvc_device_state { + UVC_DEV_DISCONNECTED = 1, +}; + +struct uvc_device { + struct usb_device *udev; + struct usb_interface *intf; + __u32 quirks; + int intfnum; + char name[32]; + + enum uvc_device_state state; + struct kref kref; + struct list_head list; + + /* Video control interface */ + __u16 uvc_version; + __u32 clock_frequency; + + struct list_head entities; + + struct uvc_video_device video; + + /* Status Interrupt Endpoint */ + struct usb_host_endpoint *int_ep; + struct urb *int_urb; + __u8 status[16]; + struct input_dev *input; + + /* Video Streaming interfaces */ + struct list_head streaming; +}; + +enum uvc_handle_state { + UVC_HANDLE_PASSIVE = 0, + UVC_HANDLE_ACTIVE = 1, +}; + +struct uvc_fh { + struct uvc_video_device *device; + enum uvc_handle_state state; +}; + +struct uvc_driver { + struct usb_driver driver; + + struct mutex open_mutex; /* protects from open/disconnect race */ + + struct list_head devices; /* struct uvc_device list */ + struct list_head controls; /* struct uvc_control_info list */ + struct mutex ctrl_mutex; /* protects controls and devices + lists */ +}; + +/* ------------------------------------------------------------------------ + * Debugging, printing and logging + */ + +#define UVC_TRACE_PROBE (1 << 0) +#define UVC_TRACE_DESCR (1 << 1) +#define UVC_TRACE_CONTROL (1 << 2) +#define UVC_TRACE_FORMAT (1 << 3) +#define UVC_TRACE_CAPTURE (1 << 4) +#define UVC_TRACE_CALLS (1 << 5) +#define UVC_TRACE_IOCTL (1 << 6) +#define UVC_TRACE_FRAME (1 << 7) +#define UVC_TRACE_SUSPEND (1 << 8) +#define UVC_TRACE_STATUS (1 << 9) + +extern unsigned int uvc_trace_param; + +#define uvc_trace(flag, msg...) \ + do { \ + if (uvc_trace_param & flag) \ + printk(KERN_DEBUG "uvcvideo: " msg); \ + } while (0) + +#define uvc_printk(level, msg...) \ + printk(level "uvcvideo: " msg) + +#define UVC_GUID_FORMAT "%02x%02x%02x%02x-%02x%02x-%02x%02x-%02x%02x-" \ + "%02x%02x%02x%02x%02x%02x" +#define UVC_GUID_ARGS(guid) \ + (guid)[3], (guid)[2], (guid)[1], (guid)[0], \ + (guid)[5], (guid)[4], \ + (guid)[7], (guid)[6], \ + (guid)[8], (guid)[9], \ + (guid)[10], (guid)[11], (guid)[12], \ + (guid)[13], (guid)[14], (guid)[15] + +/* -------------------------------------------------------------------------- + * Internal functions. + */ + +/* Core driver */ +extern struct uvc_driver uvc_driver; +extern void uvc_delete(struct kref *kref); + +/* Video buffers queue management. */ +extern void uvc_queue_init(struct uvc_video_queue *queue); +extern int uvc_alloc_buffers(struct uvc_video_queue *queue, + unsigned int nbuffers, unsigned int buflength); +extern int uvc_free_buffers(struct uvc_video_queue *queue); +extern int uvc_query_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_queue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf); +extern int uvc_dequeue_buffer(struct uvc_video_queue *queue, + struct v4l2_buffer *v4l2_buf, int nonblocking); +extern int uvc_queue_enable(struct uvc_video_queue *queue, int enable); +extern void uvc_queue_cancel(struct uvc_video_queue *queue, int disconnect); +extern struct uvc_buffer *uvc_queue_next_buffer(struct uvc_video_queue *queue, + struct uvc_buffer *buf); +extern unsigned int uvc_queue_poll(struct uvc_video_queue *queue, + struct file *file, poll_table *wait); +static inline int uvc_queue_streaming(struct uvc_video_queue *queue) +{ + return queue->flags & UVC_QUEUE_STREAMING; +} + +/* V4L2 interface */ +extern struct file_operations uvc_fops; + +/* Video */ +extern int uvc_video_init(struct uvc_video_device *video); +extern int uvc_video_suspend(struct uvc_video_device *video); +extern int uvc_video_resume(struct uvc_video_device *video); +extern int uvc_video_enable(struct uvc_video_device *video, int enable); +extern int uvc_probe_video(struct uvc_video_device *video, + struct uvc_streaming_control *probe); +extern int uvc_query_ctrl(struct uvc_device *dev, __u8 query, __u8 unit, + __u8 intfnum, __u8 cs, void *data, __u16 size); +extern int uvc_set_video_ctrl(struct uvc_video_device *video, + struct uvc_streaming_control *ctrl, int probe); + +/* Status */ +extern int uvc_status_init(struct uvc_device *dev); +extern void uvc_status_cleanup(struct uvc_device *dev); +extern int uvc_status_suspend(struct uvc_device *dev); +extern int uvc_status_resume(struct uvc_device *dev); + +/* Controls */ +extern struct uvc_control *uvc_find_control(struct uvc_video_device *video, + __u32 v4l2_id, struct uvc_control_mapping **mapping); +extern int uvc_query_v4l2_ctrl(struct uvc_video_device *video, + struct v4l2_queryctrl *v4l2_ctrl); + +extern int uvc_ctrl_add_info(struct uvc_control_info *info); +extern int uvc_ctrl_add_mapping(struct uvc_control_mapping *mapping); +extern int uvc_ctrl_init_device(struct uvc_device *dev); +extern void uvc_ctrl_cleanup_device(struct uvc_device *dev); +extern int uvc_ctrl_resume_device(struct uvc_device *dev); +extern void uvc_ctrl_init(void); + +extern int uvc_ctrl_begin(struct uvc_video_device *video); +extern int __uvc_ctrl_commit(struct uvc_video_device *video, int rollback); +static inline int uvc_ctrl_commit(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 0); +} +static inline int uvc_ctrl_rollback(struct uvc_video_device *video) +{ + return __uvc_ctrl_commit(video, 1); +} + +extern int uvc_ctrl_get(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); +extern int uvc_ctrl_set(struct uvc_video_device *video, + struct v4l2_ext_control *xctrl); + +extern int uvc_xu_ctrl_query(struct uvc_video_device *video, + struct uvc_xu_control *ctrl, int set); + +/* Utility functions */ +extern void uvc_simplify_fraction(uint32_t *numerator, uint32_t *denominator, + unsigned int n_terms, unsigned int threshold); +extern uint32_t uvc_fraction_to_interval(uint32_t numerator, + uint32_t denominator); +extern struct usb_host_endpoint *uvc_find_endpoint( + struct usb_host_interface *alts, __u8 epaddr); + +/* Quirks support */ +void uvc_video_decode_isight(struct urb *urb, struct uvc_video_device *video, + struct uvc_buffer *buf); + +#endif /* __KERNEL__ */ + +#endif -- cgit v0.10.2 From dd4f0888f8b42a97c93a66617a4f9acaff3089d6 Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Mon, 30 Jun 2008 15:03:14 -0700 Subject: [IA64] Bugfix for system with 32 cpus On a system where there are no hot pluggable cpus "additional_cpus" is still set to -1 at the point where we call per_cpu_scan_finalize(). If we didn't find an SRAT table and so pick the default "32" for the number of cpus, when we get to: high_cpu = min(high_cpu + reserve_cpus, NR_CPUS); we will end up initializing for just 31 cpus ... and so we will die horribly when bringing up cpu#32. Problem introduced by: 2c6e6db41f01b6b4eb98809350827c9678996698 "Minimize per_cpu reservations." Acked-by: Robin Holt Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 4ae15c8..632cda8 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -547,7 +547,8 @@ setup_arch (char **cmdline_p) # ifdef CONFIG_ACPI_NUMA acpi_numa_init(); per_cpu_scan_finalize((cpus_weight(early_cpu_possible_map) == 0 ? - 32 : cpus_weight(early_cpu_possible_map)), additional_cpus); + 32 : cpus_weight(early_cpu_possible_map)), + additional_cpus > 0 ? additional_cpus : 0); # endif #else # ifdef CONFIG_SMP -- cgit v0.10.2 From 3a677d216445dba3332a000063405de3fc135859 Mon Sep 17 00:00:00 2001 From: Doug Chapman Date: Mon, 30 Jun 2008 15:06:48 -0700 Subject: [IA64] export account_system_vtime The symbol account_system_vtime is used by the kvm module but not exported. This breaks building with CONFIG_VIRT_CPU_ACCOUNTING and CONFIG_KVM=m. Signed-off-by: Doug Chapman Acked-by: Hidetosho Seto Signed-off-by: Tony Luck diff --git a/arch/ia64/kernel/time.c b/arch/ia64/kernel/time.c index 8c73643..aad1b7b 100644 --- a/arch/ia64/kernel/time.c +++ b/arch/ia64/kernel/time.c @@ -117,6 +117,7 @@ void account_system_vtime(struct task_struct *tsk) local_irq_restore(flags); } +EXPORT_SYMBOL_GPL(account_system_vtime); /* * Called from the timer interrupt handler to charge accumulated user time -- cgit v0.10.2 From 619b0488038224391e64fa03854651ca0f5efe56 Mon Sep 17 00:00:00 2001 From: Raistlin Date: Thu, 26 Jun 2008 18:54:09 +0200 Subject: sched: fix divide error when trying to configure rt_period to zero Here it is another little Oops we found while configuring invalid values via cgroups: echo 0 > /dev/cgroups/0/cpu.rt_period_us or echo 4294967296 > /dev/cgroups/0/cpu.rt_period_us [ 205.509825] divide error: 0000 [#1] [ 205.510151] Modules linked in: [ 205.510151] [ 205.510151] Pid: 2339, comm: bash Not tainted (2.6.26-rc8 #33) [ 205.510151] EIP: 0060:[] EFLAGS: 00000293 CPU: 0 [ 205.510151] EIP is at div64_u64+0x5f/0x70 [ 205.510151] EAX: 0000389f EBX: 00000000 ECX: 00000000 EDX: 00000000 [ 205.510151] ESI: d9800000 EDI: 00000000 EBP: c6cede60 ESP: c6cede50 [ 205.510151] DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 0068 [ 205.510151] Process bash (pid: 2339, ti=c6cec000 task=c79be370 task.ti=c6cec000) [ 205.510151] Stack: d9800000 0000389f c05971a0 d9800000 c6cedeb4 c0214dbd 00000000 00000000 [ 205.510151] c6cede88 c0242bd8 c05377c0 c7a41b40 00000000 00000000 00000000 c05971a0 [ 205.510151] c780ed20 c7508494 c7a41b40 00000000 00000002 c6cedebc c05971a0 ffffffea [ 205.510151] Call Trace: [ 205.510151] [] ? __rt_schedulable+0x1cd/0x240 [ 205.510151] [] ? cgroup_file_open+0x18/0xe0 [ 205.510151] [] ? tg_set_bandwidth+0xa4/0xf0 [ 205.510151] [] ? sched_group_set_rt_period+0x36/0x50 [ 205.510151] [] ? cpu_rt_period_write_uint+0xe/0x10 [ 205.510151] [] ? cgroup_file_write+0x125/0x160 [ 205.510151] [] ? hrtimer_interrupt+0x155/0x190 [ 205.510151] [] ? security_file_permission+0xf/0x20 [ 205.510151] [] ? rw_verify_area+0x48/0xc0 [ 205.510151] [] ? dupfd+0x104/0x130 [ 205.510151] [] ? vfs_write+0x9c/0x160 [ 205.510151] [] ? cgroup_file_write+0x0/0x160 [ 205.510151] [] ? sys_write+0x3d/0x70 [ 205.510151] [] ? sysenter_past_esp+0x6a/0x91 [ 205.510151] ======================= [ 205.510151] Code: 0f 45 de 31 f6 0f ad d0 d3 ea f6 c1 20 0f 45 c2 0f 45 d6 89 45 f0 89 55 f4 8b 55 f4 31 c9 8b 45 f0 39 d3 89 c6 77 08 89 d0 31 d2 f3 89 c1 83 c4 08 89 f0 f7 f3 89 ca 5b 5e 5d c3 55 89 e5 56 [ 205.510151] EIP: [] div64_u64+0x5f/0x70 SS:ESP 0068:c6cede50 The attached patch solves the issue for me. I'm checking as soon as possible for the period not being zero since, if it is, going ahead is useless. This way we also save a mutex_lock() and a read_lock() wrt doing it inside tg_set_bandwidth() or __rt_schedulable(). Signed-off-by: Dario Faggioli Signed-off-by: Michael Trimarchi Signed-off-by: Ingo Molnar diff --git a/kernel/sched.c b/kernel/sched.c index a66e856..94ead43 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -8502,6 +8502,9 @@ int sched_group_set_rt_period(struct task_group *tg, long rt_period_us) rt_period = (u64)rt_period_us * NSEC_PER_USEC; rt_runtime = tg->rt_bandwidth.rt_runtime; + if (rt_period == 0) + return -EINVAL; + return tg_set_bandwidth(tg, rt_period, rt_runtime); } -- cgit v0.10.2 From efac41894df57d32b483ac622d03541b5b2692c0 Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 1 Jul 2008 08:56:32 +0200 Subject: x86: fix NODES_SHIFT Kconfig range commit 4323838215184f5a2f081e0d17b8d60731b03164 x86: change size of node ids from u8 to s16 set the range for NODES_SHIFT to 1..15. The possible range is 1..9 Fixes Bugzilla #10726 Reported-by: Dave Jones Signed-off-by: Thomas Gleixner diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 52e18e6..8a07f41 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -961,8 +961,8 @@ config NUMA_EMU number of nodes. This is only useful for debugging. config NODES_SHIFT - int "Max num nodes shift(1-15)" - range 1 15 if X86_64 + int "Max num nodes shift(1-9)" + range 1 9 if X86_64 default "6" if X86_64 default "4" if X86_NUMAQ default "3" -- cgit v0.10.2 From d585d0b9d73ed999cc7b8cf3cac4a5b01abb544e Mon Sep 17 00:00:00 2001 From: Divyesh Shah Date: Mon, 16 Jun 2008 18:37:08 +0200 Subject: block: Fix the starving writes bug in the anticipatory IO scheduler AS scheduler alternates between issuing read and write batches. It does the batch switch only after all requests from the previous batch are completed. When switching to a write batch, if there is an on-going read request, it waits for its completion and indicates its intention of switching by setting ad->changed_batch and the new direction but does not update the batch_expire_time for the new write batch which it does in the case of no previous pending requests. On completion of the read request, it sees that we were waiting for the switch and schedules work for kblockd right away and resets the ad->changed_data flag. Now when kblockd enters dispatch_request where it is expected to pick up a write request, it in turn ends the write batch because the batch_expire_timer was not updated and shows the expire timestamp for the previous batch. This results in the write starvation for all the cases where there is the intention for switching to a write batch, but there is a previous in-flight read request and the batch gets reverted to a read_batch right away. This also holds true in the reverse case (switching from a write batch to a read batch with an in-flight write request). I've checked that this bug exists on 2.6.11, 2.6.18, 2.6.24 and linux-2.6-block git HEAD. I've tested the fix on x86 platforms with SCSI drives where the driver asks for the next request while a current request is in-flight. This patch is based off linux-2.6-block git HEAD. Bug reproduction: A simple scenario which reproduces this bug is: - dd if=/dev/hda3 of=/dev/null & - lilo The lilo takes forever to complete. This can also be reproduced fairly easily with the earlier dd and another test program doing msync(). The example test program below should print out a message after every iteration but it simply hangs forever. With this bugfix it makes forward progress. ==== Example test program using msync() (thanks to suleiman AT google DOT com) inline uint64_t rdtsc(void) { int64_t tsc; __asm __volatile("rdtsc" : "=A" (tsc)); return (tsc); } int main(int argc, char **argv) { struct stat st; uint64_t e, s, t; char *p, q; long i; int fd; if (argc < 2) { printf("Usage: %s \n", argv[0]); return (1); } if ((fd = open(argv[1], O_RDWR | O_NOATIME)) < 0) err(1, "open"); if (fstat(fd, &st) < 0) err(1, "fstat"); p = mmap(NULL, st.st_size, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); t = 0; for (i = 0; i < 1000; i++) { *p = 0; msync(p, 4096, MS_SYNC); s = rdtsc(); *p = 0; __asm __volatile(""::: "memory"); e = rdtsc(); if (argc > 2) printf("%d: %lld cycles %jd %jd\n", i, e - s, (intmax_t)s, (intmax_t)e); t += e - s; } printf("average time: %lld cycles\n", t / 1000); return (0); } Cc: Acked-by: Nick Piggin Signed-off-by: Jens Axboe diff --git a/block/as-iosched.c b/block/as-iosched.c index 8c39467..743f33a 100644 --- a/block/as-iosched.c +++ b/block/as-iosched.c @@ -831,6 +831,8 @@ static void as_completed_request(struct request_queue *q, struct request *rq) } if (ad->changed_batch && ad->nr_dispatched == 1) { + ad->current_batch_expires = jiffies + + ad->batch_expire[ad->batch_data_dir]; kblockd_schedule_work(&ad->antic_work); ad->changed_batch = 0; -- cgit v0.10.2 From 18ce3751ccd488c78d3827e9f6bf54e6322676fb Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 1 Jul 2008 09:07:34 +0200 Subject: Properly notify block layer of sync writes fsync_buffers_list() and sync_dirty_buffer() both issue async writes and then immediately wait on them. Conceptually, that makes them sync writes and we should treat them as such so that the IO schedulers can handle them appropriately. This patch fixes a write starvation issue that Lin Ming reported, where xx is stuck for more than 2 minutes because of a large number of synchronous IO in the system: INFO: task kjournald:20558 blocked for more than 120 seconds. "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. kjournald D ffff810010820978 6712 20558 2 ffff81022ddb1d10 0000000000000046 ffff81022e7baa10 ffffffff803ba6f2 ffff81022ecd0000 ffff8101e6dc9160 ffff81022ecd0348 000000008048b6cb 0000000000000086 ffff81022c4e8d30 0000000000000000 ffffffff80247537 Call Trace: [] kobject_get+0x12/0x17 [] getnstimeofday+0x2f/0x83 [] sync_buffer+0x0/0x3f [] io_schedule+0x5d/0x9f [] sync_buffer+0x3b/0x3f [] __wait_on_bit+0x40/0x6f [] sync_buffer+0x0/0x3f [] out_of_line_wait_on_bit+0x6c/0x78 [] wake_bit_function+0x0/0x23 [] sync_dirty_buffer+0x98/0xcb [] journal_commit_transaction+0x97d/0xcb6 [] lock_timer_base+0x26/0x4b [] kjournald+0xc1/0x1fb [] autoremove_wake_function+0x0/0x2e [] kjournald+0x0/0x1fb [] kthread+0x47/0x74 [] schedule_tail+0x28/0x5d [] child_rip+0xa/0x12 [] kthread+0x0/0x74 [] child_rip+0x0/0x12 Lin Ming confirms that this patch fixes the issue. I've run tests with it for the past week and no ill effects have been observed, so I'm proposing it for inclusion into 2.6.26. Signed-off-by: Jens Axboe diff --git a/fs/buffer.c b/fs/buffer.c index a073f3f..0f51c0f 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -821,7 +821,7 @@ static int fsync_buffers_list(spinlock_t *lock, struct list_head *list) * contents - it is a noop if I/O is still in * flight on potentially older contents. */ - ll_rw_block(SWRITE, 1, &bh); + ll_rw_block(SWRITE_SYNC, 1, &bh); brelse(bh); spin_lock(lock); } @@ -2940,16 +2940,19 @@ void ll_rw_block(int rw, int nr, struct buffer_head *bhs[]) for (i = 0; i < nr; i++) { struct buffer_head *bh = bhs[i]; - if (rw == SWRITE) + if (rw == SWRITE || rw == SWRITE_SYNC) lock_buffer(bh); else if (test_set_buffer_locked(bh)) continue; - if (rw == WRITE || rw == SWRITE) { + if (rw == WRITE || rw == SWRITE || rw == SWRITE_SYNC) { if (test_clear_buffer_dirty(bh)) { bh->b_end_io = end_buffer_write_sync; get_bh(bh); - submit_bh(WRITE, bh); + if (rw == SWRITE_SYNC) + submit_bh(WRITE_SYNC, bh); + else + submit_bh(WRITE, bh); continue; } } else { @@ -2978,7 +2981,7 @@ int sync_dirty_buffer(struct buffer_head *bh) if (test_clear_buffer_dirty(bh)) { get_bh(bh); bh->b_end_io = end_buffer_write_sync; - ret = submit_bh(WRITE, bh); + ret = submit_bh(WRITE_SYNC, bh); wait_on_buffer(bh); if (buffer_eopnotsupp(bh)) { clear_buffer_eopnotsupp(bh); diff --git a/include/linux/fs.h b/include/linux/fs.h index 7c10808..d8e2762 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -83,6 +83,7 @@ extern int dir_notify_enable; #define READ_SYNC (READ | (1 << BIO_RW_SYNC)) #define READ_META (READ | (1 << BIO_RW_META)) #define WRITE_SYNC (WRITE | (1 << BIO_RW_SYNC)) +#define SWRITE_SYNC (SWRITE | (1 << BIO_RW_SYNC)) #define WRITE_BARRIER ((1 << BIO_RW) | (1 << BIO_RW_BARRIER)) #define SEL_IN 1 -- cgit v0.10.2 From 8558f8f81680a43d383abd1b5f23d3501fedfa65 Mon Sep 17 00:00:00 2001 From: Gautham R Shenoy Date: Fri, 27 Jun 2008 10:17:38 +0530 Subject: rcu: fix hotplug vs rcu race Dhaval Giani reported this warning during cpu hotplug stress-tests: | On running kernel compiles in parallel with cpu hotplug: | | WARNING: at arch/x86/kernel/smp.c:118 | native_smp_send_reschedule+0x21/0x36() | Modules linked in: | Pid: 27483, comm: cc1 Not tainted 2.6.26-rc7 #1 | [...] | [] native_smp_send_reschedule+0x21/0x36 | [] force_quiescent_state+0x47/0x57 | [] call_rcu+0x51/0x6d | [] __fput+0x130/0x158 | [] fput+0x17/0x19 | [] filp_close+0x4d/0x57 | [] sys_close+0x5c/0x97 IMHO the warning is a spurious one. cpu_online_map is updated by the _cpu_down() using stop_machine_run(). Since force_quiescent_state is invoked from irqs disabled section, stop_machine_run() won't be executing while a cpu is executing force_quiescent_state(). Hence the cpu_online_map is stable while we're in the irq disabled section. However, a cpu might have been offlined _just_ before we disabled irqs while entering force_quiescent_state(). And rcu subsystem might not yet have handled the CPU_DEAD notification, leading to the offlined cpu's bit being set in the rcp->cpumask. Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent sending smp_reschedule() to an offlined CPU. Here's the timeline: CPU_A CPU_B -------------------------------------------------------------- cpu_down(): . . . . . stop_machine(): /* disables preemption, . * and irqs */ . . . . . take_cpu_down(); . . . . . . . cpu_disable(); /*this removes cpu . *from cpu_online_map . */ . . . . . restart_machine(); /* enables irqs */ . ------WINDOW DURING WHICH rcp->cpumask is stale --------------- . call_rcu(); . /* disables irqs here */ . .force_quiescent_state(); .CPU_DEAD: .for_each_cpu(rcp->cpumask) . . smp_send_reschedule(); . . . . WARN_ON() for offlined CPU! . . . rcu_cpu_notify: . -------- WINDOW ENDS ------------------------------------------ rcu_offline_cpu() /* Which calls cpu_quiet() * which removes * cpu from rcp->cpumask. */ If a new batch was started just before calling stop_machine_run(), the "tobe-offlined" cpu is still present in rcp-cpumask. During a cpu-offline, from take_cpu_down(), we queue an rt-prio idle task as the next task to be picked by the scheduler. We also call cpu_disable() which will disable any further interrupts and remove the cpu's bit from the cpu_online_map. Once the stop_machine_run() successfully calls take_cpu_down(), it calls schedule(). That's the last time a schedule is called on the offlined cpu, and hence the last time when rdp->passed_quiesc will be set to 1 through rcu_qsctr_inc(). But the cpu_quiet() will be on this cpu will be called only when the next RCU_SOFTIRQ occurs on this CPU. So at this time, the offlined CPU is still set in rcp->cpumask. Now coming back to the idle_task which truely offlines the CPU, it does check for a pending RCU and raises the softirq, since it will find rdp->passed_quiesc to be 0 in this case. However, since the cpu is offline I am not sure if the softirq will trigger on the CPU. Even if it doesn't the rcu_offline_cpu() will find that rcp->completed is not the same as rcp->cur, which means that our cpu could be holding up the grace period progression. Hence we call cpu_quiet() and move ahead. But because of the window explained in the timeline, we could still have a call_rcu() before the RCU subsystem executes it's CPU_DEAD notification, and we send smp_send_reschedule() to offlined cpu while trying to force the quiescent states. The appended patch adds comments and prevents checking for offlined cpu everytime. cpu_online_map is updated by the _cpu_down() using stop_machine_run(). Since force_quiescent_state is invoked from irqs disabled section, stop_machine_run() won't be executing while a cpu is executing force_quiescent_state(). Hence the cpu_online_map is stable while we're in the irq disabled section. Reported-by: Dhaval Giani Signed-off-by: Gautham R Shenoy Acked-by: Dhaval Giani Cc: Dipankar Sarma Cc: laijs@cn.fujitsu.com Cc: Peter Zijlstra Cc: Rusty Russel Cc: "Paul E. McKenney" Signed-off-by: Ingo Molnar diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index f4ffbd0..a38895a 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -89,8 +89,22 @@ static void force_quiescent_state(struct rcu_data *rdp, /* * Don't send IPI to itself. With irqs disabled, * rdp->cpu is the current cpu. + * + * cpu_online_map is updated by the _cpu_down() + * using stop_machine_run(). Since we're in irqs disabled + * section, stop_machine_run() is not exectuting, hence + * the cpu_online_map is stable. + * + * However, a cpu might have been offlined _just_ before + * we disabled irqs while entering here. + * And rcu subsystem might not yet have handled the CPU_DEAD + * notification, leading to the offlined cpu's bit + * being set in the rcp->cpumask. + * + * Hence cpumask = (rcp->cpumask & cpu_online_map) to prevent + * sending smp_reschedule() to an offlined CPU. */ - cpumask = rcp->cpumask; + cpus_and(cpumask, rcp->cpumask, cpu_online_map); cpu_clear(rdp->cpu, cpumask); for_each_cpu_mask(cpu, cpumask) smp_send_reschedule(cpu); -- cgit v0.10.2 From 2709781be6141798162f1089df728fb218a590df Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:41 +0100 Subject: I2C: S3C2410: Check ACK on byte transmission We should check for the reception of an ACK after transmitting each data byte. The address send has been correctly checking this, but the data write byte state should have also been checking for these failures. As part of the same fix, we remove the ACK checking from the receive path where it should not have been checking for an ACK which our hardware was sending. Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1305ef1..7ad22c5 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -323,7 +323,17 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * end of the message, and if so, work out what to do */ + if (!(i2c->msg->flags & I2C_M_IGNORE_NAK)) { + if (iicstat & S3C2410_IICSTAT_LASTBIT) { + dev_dbg(i2c->dev, "WRITE: No Ack\n"); + + s3c24xx_i2c_stop(i2c, -ECONNREFUSED); + goto out_ack; + } + } + retry_write: + if (!is_msgend(i2c)) { byte = i2c->msg->buf[i2c->msg_ptr++]; writeb(byte, i2c->regs + S3C2410_IICDS); @@ -377,17 +387,6 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * going to do any more read/write */ - if (!(i2c->msg->flags & I2C_M_IGNORE_NAK) && - !(is_msglast(i2c) && is_lastmsg(i2c))) { - - if (iicstat & S3C2410_IICSTAT_LASTBIT) { - dev_dbg(i2c->dev, "READ: No Ack\n"); - - s3c24xx_i2c_stop(i2c, -ECONNREFUSED); - goto out_ack; - } - } - byte = readb(i2c->regs + S3C2410_IICDS); i2c->msg->buf[i2c->msg_ptr++] = byte; -- cgit v0.10.2 From 63f5c2891eae6b4dd0538ef094e5f256d6150d7b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:42 +0100 Subject: I2C: S3C2410: Fixup error codes returned rom a transfer. The driver should be returning -ENXIO for transfers that do not pass the initial address byte stage. Note, also small tidyups to the driver comments in the area. Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 7ad22c5..d2645da 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -290,12 +290,12 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) * bus, or started a new i2c message */ - if (iicstat & S3C2410_IICSTAT_LASTBIT && + if (iicstat & S3C2410_IICSTAT_LASTBIT && !(i2c->msg->flags & I2C_M_IGNORE_NAK)) { /* ack was not received... */ dev_dbg(i2c->dev, "ack was not received\n"); - s3c24xx_i2c_stop(i2c, -EREMOTEIO); + s3c24xx_i2c_stop(i2c, -ENXIO); goto out_ack; } @@ -305,7 +305,7 @@ static int i2s_s3c_irq_nextbyte(struct s3c24xx_i2c *i2c, unsigned long iicstat) i2c->state = STATE_WRITE; /* terminate the transfer if there is nothing to do - * (used by the i2c probe to find devices */ + * as this is used by the i2c probe to find devices. */ if (is_lastmsg(i2c) && i2c->msg->len == 0) { s3c24xx_i2c_stop(i2c, 0); -- cgit v0.10.2 From d150a4bbd0e5c6427e66086b139953428680160b Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 11:59:43 +0100 Subject: I2C: S3C2410: Add MODULE_ALIAS() for s3c2440 device. Add a MODULE_ALIAS() statement for the i2c-s3c2410 controller to ensure that it can be autoloaded on the S3C2440 systems that we support. Signed-off-by: Ben Dooks diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index d2645da..9e8c875 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -948,3 +948,4 @@ MODULE_DESCRIPTION("S3C24XX I2C Bus driver"); MODULE_AUTHOR("Ben Dooks, "); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:s3c2410-i2c"); +MODULE_ALIAS("platform:s3c2440-i2c"); -- cgit v0.10.2 From a94c248113b86bbbc47d027a4004b70f2be298b1 Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Tue, 1 Jul 2008 17:18:17 +0100 Subject: PCI: Restrict VPD read permission to root Some PCI devices will lock up if we attempt to read from VPD addresses beyond some device-dependent limit. Until we can identify these devices and adjust the file size accordingly, only let root read VPD through sysfs to prevent a DoS by normal users. Signed-off-by: Ben Hutchings Signed-off-by: Jesse Barnes diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 6f3c744..1f855f0 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -738,7 +738,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) pdev->vpd->attr = attr; attr->size = pdev->vpd->ops->get_size(pdev); attr->attr.name = "vpd"; - attr->attr.mode = S_IRUGO | S_IWUSR; + attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_vpd; attr->write = pci_write_vpd; retval = sysfs_create_bin_file(&pdev->dev.kobj, attr); -- cgit v0.10.2 From 5d1a04110bfc40a86e1387b5f4382addd9aa7fbb Mon Sep 17 00:00:00 2001 From: John Linn Date: Tue, 1 Jul 2008 14:17:18 -0600 Subject: powerpc/bootwrapper: update for initrd with simpleImage This change to the makefile corrects the build of a simpleImage with initrd. Signed-off-by: John Linn Signed-off-by: Grant Likely diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 1cee2f9..095e04d 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -273,7 +273,8 @@ endif initrd- := $(patsubst zImage%, zImage.initrd%, $(image-n) $(image-)) initrd-y := $(patsubst zImage%, zImage.initrd%, \ $(patsubst dtbImage%, dtbImage.initrd%, \ - $(patsubst treeImage%, treeImage.initrd%, $(image-y)))) + $(patsubst simpleImage%, simpleImage.initrd%, \ + $(patsubst treeImage%, treeImage.initrd%, $(image-y))))) initrd-y := $(filter-out $(image-y), $(initrd-y)) targets += $(image-y) $(initrd-y) -- cgit v0.10.2 From 2260e63a2f313f416b31af80d02f02ef92d20d78 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Tue, 1 Jul 2008 22:38:18 +0200 Subject: i2c: Documentation: fix device matching description The matching process described for new style clients in Documentation/i2c/writing-clients is classed as out-of-date as it requires the presence of an .id_table entry in the driver's i2c_driver entry. Signed-off-by: Ben Dooks Signed-off-by: Jean Delvare diff --git a/Documentation/i2c/writing-clients b/Documentation/i2c/writing-clients index ee75cba..d4cd412 100644 --- a/Documentation/i2c/writing-clients +++ b/Documentation/i2c/writing-clients @@ -25,12 +25,23 @@ routines, and should be zero-initialized except for fields with data you provide. A client structure holds device-specific information like the driver model device node, and its I2C address. +/* iff driver uses driver model ("new style") binding model: */ + +static struct i2c_device_id foo_idtable[] = { + { "foo", my_id_for_foo }, + { "bar", my_id_for_bar }, + { } +}; + +MODULE_DEVICE_TABLE(i2c, foo_idtable); + static struct i2c_driver foo_driver = { .driver = { .name = "foo", }, /* iff driver uses driver model ("new style") binding model: */ + .id_table = foo_ids, .probe = foo_probe, .remove = foo_remove, @@ -173,10 +184,9 @@ handle may be used during foo_probe(). If foo_probe() reports success (zero not a negative status code) it may save the handle and use it until foo_remove() returns. That binding model is used by most Linux drivers. -Drivers match devices when i2c_client.driver_name and the driver name are -the same; this approach is used in several other busses that don't have -device typing support in the hardware. The driver and module name should -match, so hotplug/coldplug mechanisms will modprobe the driver. +The probe function is called when an entry in the id_table name field +matches the device's name. It is passed the entry that was matched so +the driver knows which one in the table matched. Device Creation (Standard driver model) -- cgit v0.10.2 From 8e29da9ee8958cc17e27f4053420f1c982614793 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 1 Jul 2008 22:38:18 +0200 Subject: i2c: Fix bad hint about irqs in i2c.h i2c.h mentions -1 as a not-issued irq. This false hint was taken by of_i2c and caused crashes. Don't give any advice as 'no irq' is not consistent across all architectures yet and it is not needed internally by the i2c-core. Signed-off-by: Wolfram Sang Signed-off-by: Jean Delvare diff --git a/include/linux/i2c.h b/include/linux/i2c.h index fb9af6a..8dc7301 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -171,7 +171,7 @@ struct i2c_client { struct i2c_adapter *adapter; /* the adapter we sit on */ struct i2c_driver *driver; /* and our access routines */ struct device dev; /* the device structure */ - int irq; /* irq issued by device (or -1) */ + int irq; /* irq issued by device */ struct list_head list; /* DEPRECATED */ struct completion released; }; -- cgit v0.10.2 From 1e6d1f260611387a7b4e6eae4d1dd6f62e53714d Mon Sep 17 00:00:00 2001 From: John Linn Date: Tue, 1 Jul 2008 10:52:41 -0700 Subject: powerpc/legacy_serial: Bail if reg-offset/shift properties are present The legacy serial driver does not work with an 8250 type UART that is described in the device tree with the reg-offset and reg-shift properties. This change makes legacy_serial ignore these devices. Signed-off-by: John Linn Signed-off-by: Grant Likely diff --git a/arch/powerpc/kernel/legacy_serial.c b/arch/powerpc/kernel/legacy_serial.c index 61dd174..cf37f5c 100644 --- a/arch/powerpc/kernel/legacy_serial.c +++ b/arch/powerpc/kernel/legacy_serial.c @@ -136,6 +136,11 @@ static int __init add_legacy_soc_port(struct device_node *np, if (of_get_property(np, "clock-frequency", NULL) == NULL) return -1; + /* if reg-shift or offset, don't try to use it */ + if ((of_get_property(np, "reg-shift", NULL) != NULL) || + (of_get_property(np, "reg-offset", NULL) != NULL)) + return -1; + /* if rtas uses this device, don't try to use it as well */ if (of_get_property(np, "used-by-rtas", NULL) != NULL) return -1; -- cgit v0.10.2 From 18d76ac9a47742558bca3bbc2f7c41870ac744c8 Mon Sep 17 00:00:00 2001 From: Tim Yamin Date: Tue, 17 Jun 2008 09:33:14 +0100 Subject: powerpc/mpc5200: Fix lite5200b suspend/resume Suspend/resume ("echo mem > /sys/power/state") does not work with vanilla kernels -- the system does not suspend correctly and just hangs. This patch fixes this so suspend/resume works: 1) of_iomap does not map the whole 0xC000 of the MPC5200 immr so saving registers does not work. 2) PCI registers need to be saved and restored. Signed-off-by: Tim Yamin Signed-off-by: Grant Likely diff --git a/arch/powerpc/platforms/52xx/lite5200_pm.c b/arch/powerpc/platforms/52xx/lite5200_pm.c index 41c7fd9..fe92e65 100644 --- a/arch/powerpc/platforms/52xx/lite5200_pm.c +++ b/arch/powerpc/platforms/52xx/lite5200_pm.c @@ -14,6 +14,7 @@ static struct mpc52xx_sdma __iomem *bes; static struct mpc52xx_xlb __iomem *xlb; static struct mpc52xx_gpio __iomem *gps; static struct mpc52xx_gpio_wkup __iomem *gpw; +static void __iomem *pci; static void __iomem *sram; static const int sram_size = 0x4000; /* 16 kBytes */ static void __iomem *mbar; @@ -50,6 +51,8 @@ static int lite5200_pm_prepare(void) { .type = "builtin", .compatible = "mpc5200", }, /* efika */ {} }; + u64 regaddr64 = 0; + const u32 *regaddr_p; /* deep sleep? let mpc52xx code handle that */ if (lite5200_pm_target_state == PM_SUSPEND_STANDBY) @@ -60,8 +63,12 @@ static int lite5200_pm_prepare(void) /* map registers */ np = of_find_matching_node(NULL, immr_ids); - mbar = of_iomap(np, 0); + regaddr_p = of_get_address(np, 0, NULL, NULL); + if (regaddr_p) + regaddr64 = of_translate_address(np, regaddr_p); of_node_put(np); + + mbar = ioremap((u32) regaddr64, 0xC000); if (!mbar) { printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__); return -ENOSYS; @@ -71,6 +78,7 @@ static int lite5200_pm_prepare(void) pic = mbar + 0x500; gps = mbar + 0xb00; gpw = mbar + 0xc00; + pci = mbar + 0xd00; bes = mbar + 0x1200; xlb = mbar + 0x1f00; sram = mbar + 0x8000; @@ -85,6 +93,7 @@ static struct mpc52xx_sdma sbes; static struct mpc52xx_xlb sxlb; static struct mpc52xx_gpio sgps; static struct mpc52xx_gpio_wkup sgpw; +static char spci[0x200]; static void lite5200_save_regs(void) { @@ -94,6 +103,7 @@ static void lite5200_save_regs(void) _memcpy_fromio(&sxlb, xlb, sizeof(*xlb)); _memcpy_fromio(&sgps, gps, sizeof(*gps)); _memcpy_fromio(&sgpw, gpw, sizeof(*gpw)); + _memcpy_fromio(spci, pci, 0x200); _memcpy_fromio(saved_sram, sram, sram_size); } @@ -103,6 +113,8 @@ static void lite5200_restore_regs(void) int i; _memcpy_toio(sram, saved_sram, sram_size); + /* PCI Configuration */ + _memcpy_toio(pci, spci, 0x200); /* * GPIOs. Interrupt Master Enable has higher address then other -- cgit v0.10.2 From 77a538d5aa25a8866606a1faa4300c9aa2a59dfc Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 1 Jul 2008 17:22:48 -0700 Subject: ipv4: fix sysctl documentation of time related values These sysctl values are time related and all use the same routine (proc_dointvec_jiffies) that internally converts from seconds to jiffies. The code is fine, the documentation is just wrong. Signed-off-by: Stephen Hemminger Signed-off-by: David S. Miller diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt index 17a6e46..17f1f91 100644 --- a/Documentation/networking/ip-sysctl.txt +++ b/Documentation/networking/ip-sysctl.txt @@ -81,23 +81,23 @@ inet_peer_minttl - INTEGER Minimum time-to-live of entries. Should be enough to cover fragment time-to-live on the reassembling side. This minimum time-to-live is guaranteed if the pool size is less than inet_peer_threshold. - Measured in jiffies(1). + Measured in seconds. inet_peer_maxttl - INTEGER Maximum time-to-live of entries. Unused entries will expire after this period of time if there is no memory pressure on the pool (i.e. when the number of entries in the pool is very small). - Measured in jiffies(1). + Measured in seconds. inet_peer_gc_mintime - INTEGER Minimum interval between garbage collection passes. This interval is in effect under high memory pressure on the pool. - Measured in jiffies(1). + Measured in seconds. inet_peer_gc_maxtime - INTEGER Minimum interval between garbage collection passes. This interval is in effect under low (or absent) memory pressure on the pool. - Measured in jiffies(1). + Measured in seconds. TCP variables: @@ -794,10 +794,6 @@ tag - INTEGER Allows you to write a number, which can be used as required. Default value is 0. -(1) Jiffie: internal timeunit for the kernel. On the i386 1/100s, on the -Alpha 1/1024s. See the HZ define in /usr/include/asm/param.h for the exact -value on your system. - Alexey Kuznetsov. kuznet@ms2.inr.ac.ru -- cgit v0.10.2 From ff31ab56c0e900235f653e375fc3b01ba2d8d6a3 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:52:38 -0700 Subject: net-sched: change tcf_destroy_chain() to clear start of filter list Pass double tcf_proto pointers to tcf_destroy_chain() to make it clear the start of the filter list for more consistency. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/include/net/sch_generic.h b/include/net/sch_generic.h index ab502ec..a87fc03 100644 --- a/include/net/sch_generic.h +++ b/include/net/sch_generic.h @@ -178,7 +178,7 @@ extern struct Qdisc *qdisc_alloc(struct net_device *dev, struct Qdisc_ops *ops); extern struct Qdisc *qdisc_create_dflt(struct net_device *dev, struct Qdisc_ops *ops, u32 parentid); extern void tcf_destroy(struct tcf_proto *tp); -extern void tcf_destroy_chain(struct tcf_proto *fl); +extern void tcf_destroy_chain(struct tcf_proto **fl); static inline int __qdisc_enqueue_tail(struct sk_buff *skb, struct Qdisc *sch, struct sk_buff_head *list) diff --git a/net/mac80211/wme.c b/net/mac80211/wme.c index 635b996..5d09e86 100644 --- a/net/mac80211/wme.c +++ b/net/mac80211/wme.c @@ -323,8 +323,7 @@ static void wme_qdiscop_destroy(struct Qdisc* qd) struct ieee80211_hw *hw = &local->hw; int queue; - tcf_destroy_chain(q->filter_list); - q->filter_list = NULL; + tcf_destroy_chain(&q->filter_list); for (queue=0; queue < hw->queues; queue++) { skb_queue_purge(&q->requeued[queue]); diff --git a/net/sched/sch_api.c b/net/sched/sch_api.c index c40773c..10f01ad 100644 --- a/net/sched/sch_api.c +++ b/net/sched/sch_api.c @@ -1252,12 +1252,12 @@ void tcf_destroy(struct tcf_proto *tp) kfree(tp); } -void tcf_destroy_chain(struct tcf_proto *fl) +void tcf_destroy_chain(struct tcf_proto **fl) { struct tcf_proto *tp; - while ((tp = fl) != NULL) { - fl = tp->next; + while ((tp = *fl) != NULL) { + *fl = tp->next; tcf_destroy(tp); } } diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 3352734..8e5f70b 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -160,7 +160,7 @@ static void atm_tc_put(struct Qdisc *sch, unsigned long cl) *prev = flow->next; pr_debug("atm_tc_put: qdisc %p\n", flow->q); qdisc_destroy(flow->q); - tcf_destroy_chain(flow->filter_list); + tcf_destroy_chain(&flow->filter_list); if (flow->sock) { pr_debug("atm_tc_put: f_count %d\n", file_count(flow->sock->file)); @@ -588,8 +588,7 @@ static void atm_tc_destroy(struct Qdisc *sch) pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p); /* races ? */ while ((flow = p->flows)) { - tcf_destroy_chain(flow->filter_list); - flow->filter_list = NULL; + tcf_destroy_chain(&flow->filter_list); if (flow->ref > 1) printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow, flow->ref); diff --git a/net/sched/sch_cbq.c b/net/sched/sch_cbq.c index 09969c1..2a3c97f 100644 --- a/net/sched/sch_cbq.c +++ b/net/sched/sch_cbq.c @@ -1704,7 +1704,7 @@ static void cbq_destroy_class(struct Qdisc *sch, struct cbq_class *cl) BUG_TRAP(!cl->filters); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); qdisc_destroy(cl->q); qdisc_put_rtab(cl->R_tab); gen_kill_estimator(&cl->bstats, &cl->rate_est); @@ -1728,10 +1728,8 @@ cbq_destroy(struct Qdisc* sch) * be bound to classes which have been destroyed already. --TGR '04 */ for (h = 0; h < 16; h++) { - for (cl = q->classes[h]; cl; cl = cl->next) { - tcf_destroy_chain(cl->filter_list); - cl->filter_list = NULL; - } + for (cl = q->classes[h]; cl; cl = cl->next) + tcf_destroy_chain(&cl->filter_list); } for (h = 0; h < 16; h++) { struct cbq_class *next; diff --git a/net/sched/sch_dsmark.c b/net/sched/sch_dsmark.c index 64465ba..c4c1317 100644 --- a/net/sched/sch_dsmark.c +++ b/net/sched/sch_dsmark.c @@ -416,7 +416,7 @@ static void dsmark_destroy(struct Qdisc *sch) pr_debug("dsmark_destroy(sch %p,[qdisc %p])\n", sch, p); - tcf_destroy_chain(p->filter_list); + tcf_destroy_chain(&p->filter_list); qdisc_destroy(p->q); kfree(p->mask); } diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index fdfaa3f..eca83a3 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1123,7 +1123,7 @@ hfsc_destroy_class(struct Qdisc *sch, struct hfsc_class *cl) { struct hfsc_sched *q = qdisc_priv(sch); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); qdisc_destroy(cl->qdisc); gen_kill_estimator(&cl->bstats, &cl->rate_est); if (cl != &q->root) diff --git a/net/sched/sch_htb.c b/net/sched/sch_htb.c index 6807c97..3fb58f4 100644 --- a/net/sched/sch_htb.c +++ b/net/sched/sch_htb.c @@ -1238,7 +1238,7 @@ static void htb_destroy_class(struct Qdisc *sch, struct htb_class *cl) qdisc_put_rtab(cl->rate); qdisc_put_rtab(cl->ceil); - tcf_destroy_chain(cl->filter_list); + tcf_destroy_chain(&cl->filter_list); while (!list_empty(&cl->children)) htb_destroy_class(sch, list_entry(cl->children.next, @@ -1267,7 +1267,7 @@ static void htb_destroy(struct Qdisc *sch) and surprisingly it worked in 2.4. But it must precede it because filter need its target class alive to be able to call unbind_filter on it (without Oops). */ - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); while (!list_empty(&q->root)) htb_destroy_class(sch, list_entry(q->root.next, diff --git a/net/sched/sch_ingress.c b/net/sched/sch_ingress.c index 274b1dd..956c80a 100644 --- a/net/sched/sch_ingress.c +++ b/net/sched/sch_ingress.c @@ -104,7 +104,7 @@ static void ingress_destroy(struct Qdisc *sch) { struct ingress_qdisc_data *p = qdisc_priv(sch); - tcf_destroy_chain(p->filter_list); + tcf_destroy_chain(&p->filter_list); } static int ingress_dump(struct Qdisc *sch, struct sk_buff *skb) diff --git a/net/sched/sch_prio.c b/net/sched/sch_prio.c index 4aa2b45..5532f10 100644 --- a/net/sched/sch_prio.c +++ b/net/sched/sch_prio.c @@ -219,7 +219,7 @@ prio_destroy(struct Qdisc* sch) int prio; struct prio_sched_data *q = qdisc_priv(sch); - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); for (prio=0; priobands; prio++) qdisc_destroy(q->queues[prio]); } diff --git a/net/sched/sch_sfq.c b/net/sched/sch_sfq.c index f0463d7..6a97afb 100644 --- a/net/sched/sch_sfq.c +++ b/net/sched/sch_sfq.c @@ -520,7 +520,7 @@ static void sfq_destroy(struct Qdisc *sch) { struct sfq_sched_data *q = qdisc_priv(sch); - tcf_destroy_chain(q->filter_list); + tcf_destroy_chain(&q->filter_list); q->perturb_period = 0; del_timer_sync(&q->perturb_timer); } -- cgit v0.10.2 From a4aebb83cf0da0363684f1c339f7e6149a3e74c1 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:53:09 -0700 Subject: net-sched: fix filter destruction in atm/hfsc qdisc destruction Filters need to be destroyed before beginning to destroy classes since the destination class needs to still be alive to unbind the filter. Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/sched/sch_atm.c b/net/sched/sch_atm.c index 8e5f70b..db0e23a 100644 --- a/net/sched/sch_atm.c +++ b/net/sched/sch_atm.c @@ -586,9 +586,11 @@ static void atm_tc_destroy(struct Qdisc *sch) struct atm_flow_data *flow; pr_debug("atm_tc_destroy(sch %p,[qdisc %p])\n", sch, p); + for (flow = p->flows; flow; flow = flow->next) + tcf_destroy_chain(&flow->filter_list); + /* races ? */ while ((flow = p->flows)) { - tcf_destroy_chain(&flow->filter_list); if (flow->ref > 1) printk(KERN_ERR "atm_destroy: %p->ref = %d\n", flow, flow->ref); diff --git a/net/sched/sch_hfsc.c b/net/sched/sch_hfsc.c index eca83a3..e817aa0 100644 --- a/net/sched/sch_hfsc.c +++ b/net/sched/sch_hfsc.c @@ -1541,6 +1541,10 @@ hfsc_destroy_qdisc(struct Qdisc *sch) unsigned int i; for (i = 0; i < HFSC_HSIZE; i++) { + list_for_each_entry(cl, &q->clhash[i], hlist) + tcf_destroy_chain(&cl->filter_list); + } + for (i = 0; i < HFSC_HSIZE; i++) { list_for_each_entry_safe(cl, next, &q->clhash[i], hlist) hfsc_destroy_class(sch, cl); } -- cgit v0.10.2 From 8487460720fd03a0f4ecd032f017b0a8468028da Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:55:09 -0700 Subject: netlink: Unneeded local variable We already have a variable, which has the same capability. Signed-off-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/netlink/af_netlink.c b/net/netlink/af_netlink.c index 9b97f80..349aba1 100644 --- a/net/netlink/af_netlink.c +++ b/net/netlink/af_netlink.c @@ -886,7 +886,7 @@ retry: return netlink_unicast_kernel(sk, skb); if (sk_filter(sk, skb)) { - int err = skb->len; + err = skb->len; kfree_skb(skb); sock_put(sk); return err; -- cgit v0.10.2 From 8fde8a076940969d32805b853efdce8b988d7dda Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:55:40 -0700 Subject: net: Tyop of sk_filter() comment Parameter "needlock" no long exists. Signed-off-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/core/filter.c b/net/core/filter.c index 4f83697..df37443 100644 --- a/net/core/filter.c +++ b/net/core/filter.c @@ -68,7 +68,6 @@ static inline void *load_pointer(struct sk_buff *skb, int k, * sk_filter - run a packet through a socket filter * @sk: sock associated with &sk_buff * @skb: buffer to filter - * @needlock: set to 1 if the sock is not locked by caller. * * Run the filter code and then cut skb->data to correct size returned by * sk_run_filter. If pkt_len is 0 we toss packet. If skb->len is smaller -- cgit v0.10.2 From 93b3cff9915322d6fa36bac0064714a7076230e4 Mon Sep 17 00:00:00 2001 From: Wang Chen Date: Tue, 1 Jul 2008 19:57:19 -0700 Subject: netdevice: Fix wrong string handle in kernel command line parsing v1->v2: Use strlcpy() to ensure s[i].name be null-termination. 1. In netdev_boot_setup_add(), a long name will leak. ex. : dev=21,0x1234,0x1234,0x2345,eth123456789verylongname......... 2. In netdev_boot_setup_check(), mismatch will happen if s[i].name is a substring of dev->name. ex. : dev=...eth1 dev=...eth11 [ With feedback from Ben Hutchings. ] Signed-off-by: Wang Chen Signed-off-by: David S. Miller diff --git a/net/core/dev.c b/net/core/dev.c index 56b4657..fca23a3 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -454,7 +454,7 @@ static int netdev_boot_setup_add(char *name, struct ifmap *map) for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { if (s[i].name[0] == '\0' || s[i].name[0] == ' ') { memset(s[i].name, 0, sizeof(s[i].name)); - strcpy(s[i].name, name); + strlcpy(s[i].name, name, IFNAMSIZ); memcpy(&s[i].map, map, sizeof(s[i].map)); break; } @@ -479,7 +479,7 @@ int netdev_boot_setup_check(struct net_device *dev) for (i = 0; i < NETDEV_BOOT_SETUP_MAX; i++) { if (s[i].name[0] != '\0' && s[i].name[0] != ' ' && - !strncmp(dev->name, s[i].name, strlen(s[i].name))) { + !strcmp(dev->name, s[i].name)) { dev->irq = s[i].map.irq; dev->base_addr = s[i].map.base_addr; dev->mem_start = s[i].map.mem_start; -- cgit v0.10.2 From 2fe195cfe3e53c144d247b2768e37732e8eae4d8 Mon Sep 17 00:00:00 2001 From: Patrick McHardy Date: Tue, 1 Jul 2008 19:59:37 -0700 Subject: net: fib_rules: fix error code for unsupported families The errno code returned must be negative. Fixes "RTNETLINK answers: Unknown error 18446744073709551519". Signed-off-by: Patrick McHardy Signed-off-by: David S. Miller diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index e3e9ab0..277a230 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -226,7 +226,7 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) ops = lookup_rules_ops(net, frh->family); if (ops == NULL) { - err = EAFNOSUPPORT; + err = -EAFNOSUPPORT; goto errout; } @@ -365,7 +365,7 @@ static int fib_nl_delrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) ops = lookup_rules_ops(net, frh->family); if (ops == NULL) { - err = EAFNOSUPPORT; + err = -EAFNOSUPPORT; goto errout; } -- cgit v0.10.2 From c7f1b2044191a82e7f0a1a674751ed582289e2e0 Mon Sep 17 00:00:00 2001 From: Milan Broz Date: Wed, 2 Jul 2008 09:34:28 +0100 Subject: dm crypt: use cond_resched Add cond_resched() to prevent monopolising CPU when processing large bios. dm-crypt processes encryption of bios in sector units. If the bio request is big it can spend a long time in the encryption call. Signed-off-by: Milan Broz Tested-by: Yan Li Signed-off-by: Andrew Morton Signed-off-by: Alasdair G Kergon diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c index 835def1..ab6a61d 100644 --- a/drivers/md/dm-crypt.c +++ b/drivers/md/dm-crypt.c @@ -432,6 +432,7 @@ static int crypt_convert(struct crypt_config *cc, case 0: atomic_dec(&ctx->pending); ctx->sector++; + cond_resched(); continue; /* error */ -- cgit v0.10.2 From 06f3ed23b1e1038da649c4836b51fe035f5536bd Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 2 Jul 2008 11:03:33 -0300 Subject: V4L/DVB (8178): uvc: Fix compilation breakage for the other drivers, if uvc is selected UVC makefile defines obj as: obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o Instead of: obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o Due to that, if uvc is selected, all obj-y or obj-m that were added to compilation were forget. This breaks a proper kernel build. Acked-by: Laurent Pinchart Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/video/uvc/Makefile b/drivers/media/video/uvc/Makefile index fb39bbf..968c199 100644 --- a/drivers/media/video/uvc/Makefile +++ b/drivers/media/video/uvc/Makefile @@ -1,3 +1,3 @@ uvcvideo-objs := uvc_driver.o uvc_queue.o uvc_v4l2.o uvc_video.o uvc_ctrl.o \ uvc_status.o uvc_isight.o -obj-$(CONFIG_USB_VIDEO_CLASS) := uvcvideo.o +obj-$(CONFIG_USB_VIDEO_CLASS) += uvcvideo.o -- cgit v0.10.2 From 99cb233d60cbe644203f19938c729ea2bb004d70 Mon Sep 17 00:00:00 2001 From: Benjamin Li Date: Wed, 2 Jul 2008 10:59:04 -0700 Subject: PCI: Limit VPD read/write lengths for Broadcom 5706, 5708, 5709 rev. For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the VPD end tag will hang the device. This problem was initially observed when a vpd entry was created in sysfs ('/sys/bus/pci/devices//vpd'). A read to this sysfs entry will dump 32k of data. Reading a full 32k will cause an access beyond the VPD end tag causing the device to hang. Once the device is hung, the bnx2 driver will not be able to reset the device. We believe that it is legal to read beyond the end tag and therefore the solution is to limit the read/write length. A majority of this patch is from Matthew Wilcox who gave code for reworking the PCI vpd size information. A PCI quirk added for the Broadcom NIC's to limit the read/write's. Signed-off-by: Benjamin Li Signed-off-by: Matthew Wilcox Signed-off-by: Jesse Barnes diff --git a/drivers/pci/access.c b/drivers/pci/access.c index ec8f700..39bb96b 100644 --- a/drivers/pci/access.c +++ b/drivers/pci/access.c @@ -178,8 +178,7 @@ static int pci_vpd_pci22_read(struct pci_dev *dev, int pos, int size, int ret; int begin, end, i; - if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || - size > PCI_VPD_PCI22_SIZE - pos) + if (pos < 0 || pos > vpd->base.len || size > vpd->base.len - pos) return -EINVAL; if (size == 0) return 0; @@ -223,8 +222,8 @@ static int pci_vpd_pci22_write(struct pci_dev *dev, int pos, int size, u32 val; int ret; - if (pos < 0 || pos > PCI_VPD_PCI22_SIZE || pos & 3 || - size > PCI_VPD_PCI22_SIZE - pos || size < 4) + if (pos < 0 || pos > vpd->base.len || pos & 3 || + size > vpd->base.len - pos || size < 4) return -EINVAL; val = (u8) *buf++; @@ -255,11 +254,6 @@ out: return 4; } -static int pci_vpd_pci22_get_size(struct pci_dev *dev) -{ - return PCI_VPD_PCI22_SIZE; -} - static void pci_vpd_pci22_release(struct pci_dev *dev) { kfree(container_of(dev->vpd, struct pci_vpd_pci22, base)); @@ -268,7 +262,6 @@ static void pci_vpd_pci22_release(struct pci_dev *dev) static struct pci_vpd_ops pci_vpd_pci22_ops = { .read = pci_vpd_pci22_read, .write = pci_vpd_pci22_write, - .get_size = pci_vpd_pci22_get_size, .release = pci_vpd_pci22_release, }; @@ -284,6 +277,7 @@ int pci_vpd_pci22_init(struct pci_dev *dev) if (!vpd) return -ENOMEM; + vpd->base.len = PCI_VPD_PCI22_SIZE; vpd->base.ops = &pci_vpd_pci22_ops; spin_lock_init(&vpd->lock); vpd->cap = cap; diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c index 1f855f0..9c71858 100644 --- a/drivers/pci/pci-sysfs.c +++ b/drivers/pci/pci-sysfs.c @@ -736,7 +736,7 @@ int __must_check pci_create_sysfs_dev_files (struct pci_dev *pdev) attr = kzalloc(sizeof(*attr), GFP_ATOMIC); if (attr) { pdev->vpd->attr = attr; - attr->size = pdev->vpd->ops->get_size(pdev); + attr->size = pdev->vpd->len; attr->attr.name = "vpd"; attr->attr.mode = S_IRUSR | S_IWUSR; attr->read = pci_read_vpd; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 0a497c1b..00408c9 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -21,11 +21,11 @@ extern int pci_user_write_config_dword(struct pci_dev *dev, int where, u32 val); struct pci_vpd_ops { int (*read)(struct pci_dev *dev, int pos, int size, char *buf); int (*write)(struct pci_dev *dev, int pos, int size, const char *buf); - int (*get_size)(struct pci_dev *dev); void (*release)(struct pci_dev *dev); }; struct pci_vpd { + unsigned int len; struct pci_vpd_ops *ops; struct bin_attribute *attr; /* descriptor for sysfs VPD entry */ }; diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index dabb563..a3497dc 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1670,6 +1670,48 @@ static void __devinit quirk_via_cx700_pci_parking_caching(struct pci_dev *dev) } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_VIA, 0x324e, quirk_via_cx700_pci_parking_caching); +/* + * For Broadcom 5706, 5708, 5709 rev. A nics, any read beyond the + * VPD end tag will hang the device. This problem was initially + * observed when a vpd entry was created in sysfs + * ('/sys/bus/pci/devices//vpd'). A read to this sysfs entry + * will dump 32k of data. Reading a full 32k will cause an access + * beyond the VPD end tag causing the device to hang. Once the device + * is hung, the bnx2 driver will not be able to reset the device. + * We believe that it is legal to read beyond the end tag and + * therefore the solution is to limit the read/write length. + */ +static void __devinit quirk_brcm_570x_limit_vpd(struct pci_dev *dev) +{ + /* Only disable the VPD capability for 5706, 5708, and 5709 rev. A */ + if ((dev->device == PCI_DEVICE_ID_NX2_5706) || + (dev->device == PCI_DEVICE_ID_NX2_5708) || + ((dev->device == PCI_DEVICE_ID_NX2_5709) && + (dev->revision & 0xf0) == 0x0)) { + if (dev->vpd) + dev->vpd->len = 0x80; + } +} + +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5706S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5708S, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709, + quirk_brcm_570x_limit_vpd); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_BROADCOM, + PCI_DEVICE_ID_NX2_5709S, + quirk_brcm_570x_limit_vpd); + #ifdef CONFIG_PCI_MSI /* Some chipsets do not support MSI. We cannot easily rely on setting * PCI_BUS_FLAGS_NO_MSI in its bus flags because there are actually -- cgit v0.10.2 From a13307cef8bf51990ef1d525b1cbdcc2cfe07e2a Mon Sep 17 00:00:00 2001 From: Alex Chiang Date: Tue, 1 Jul 2008 20:02:23 -0600 Subject: PCI: acpiphp: cleanup notify handler on all root bridges During the development of the physical PCI slot patch series, Gary Hade kept on reporting strange oopses due to interactions between pci_slot and acpiphp. http://lkml.org/lkml/2007/11/28/319 find_root_bridges() unconditionally installs handle_hotplug_event_bridge() as an ACPI_SYSTEM_NOTIFY handler for all root bridges. However, during module cleanup, remove_bridge() will only remove the notify handler iff the root bridge had a hot-pluggable slot directly underneath. That is: root bridge -> hotplug slot But, if the topology looks like either of the following: root bridge -> non-hotplug slot root bridge -> p2p bridge -> hotplug slot Then we currently do not remove the notify handler from that root bridge. This can cause a kernel oops if we modprobe acpiphp later and it gets loaded somewhere else in memory. If the root bridge then receives a hotplug event, it will then attempt to call a stale, non-existent notify handler and we blow up. Much thanks goes to Gary Hade for his persistent debugging efforts. Signed-off-by: Alex Chiang Signed-off-by: Gary Hade Signed-off-by: Jesse Barnes diff --git a/drivers/pci/hotplug/acpiphp_glue.c b/drivers/pci/hotplug/acpiphp_glue.c index 648596d..91156f8 100644 --- a/drivers/pci/hotplug/acpiphp_glue.c +++ b/drivers/pci/hotplug/acpiphp_glue.c @@ -700,9 +700,10 @@ cleanup_p2p_bridge(acpi_handle handle, u32 lvl, void *context, void **rv) acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, cleanup_p2p_bridge, NULL, NULL); - if (!(bridge = acpiphp_handle_to_bridge(handle))) - return AE_OK; - cleanup_bridge(bridge); + bridge = acpiphp_handle_to_bridge(handle); + if (bridge) + cleanup_bridge(bridge); + return AE_OK; } @@ -715,9 +716,19 @@ static void remove_bridge(acpi_handle handle) acpi_walk_namespace(ACPI_TYPE_DEVICE, handle, (u32)1, cleanup_p2p_bridge, NULL, NULL); + /* + * On root bridges with hotplug slots directly underneath (ie, + * no p2p bridge inbetween), we call cleanup_bridge(). + * + * The else clause cleans up root bridges that either had no + * hotplug slots at all, or had a p2p bridge underneath. + */ bridge = acpiphp_handle_to_bridge(handle); if (bridge) cleanup_bridge(bridge); + else + acpi_remove_notify_handler(handle, ACPI_SYSTEM_NOTIFY, + handle_hotplug_event_bridge); } static struct pci_dev * get_apic_pci_info(acpi_handle handle) -- cgit v0.10.2 From 83680cdbcecd1fd284ad4df060d12bf214bb63a8 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Tue, 1 Jul 2008 13:55:25 +0200 Subject: drivers/input/ff-core.c needs Commit 656acd2bbc4ce7f224de499ee255698701396c48 ("Input: fix locking in force-feedback core") causes the following regression on m68k: | linux/drivers/input/ff-core.c: In function 'input_ff_upload': | linux/drivers/input/ff-core.c:172: error: dereferencing pointer to incomplete type | linux/drivers/input/ff-core.c: In function 'erase_effect': | linux/drivers/input/ff-core.c:197: error: dereferencing pointer to incomplete type | linux/drivers/input/ff-core.c:204: error: dereferencing pointer to incomplete type | make[4]: *** [drivers/input/ff-core.o] Error 1 As the incomplete type is `struct task_struct', including fixes it. Signed-off-by: Geert Uytterhoeven Acked-by: Dmitry Torokhov Signed-off-by: Linus Torvalds diff --git a/drivers/input/ff-core.c b/drivers/input/ff-core.c index 4c01464..72c63e5 100644 --- a/drivers/input/ff-core.c +++ b/drivers/input/ff-core.c @@ -28,6 +28,7 @@ #include #include #include +#include /* * Check that the effect_id is a valid effect and whether the user -- cgit v0.10.2 From 3d25802e3ba7c82457b5c12bbfeefe391d8a333e Mon Sep 17 00:00:00 2001 From: Jesse Barnes Date: Tue, 1 Jul 2008 12:32:52 -0700 Subject: DRM/i915: only use tiled blits on 965+ When scheduled swaps occur, we need to blit between front & back buffers. If the buffers are tiled, we need to set the appropriate XY_SRC_COPY tile bit, but only on 965 chips, since it will cause corruption on pre-965 (e.g. 945). Bug reported by and fix tested by Tomas Janousek . Signed-off-by: Jesse Barnes Acked-by: Dave Airlie Signed-off-by: Linus Torvalds diff --git a/drivers/char/drm/i915_irq.c b/drivers/char/drm/i915_irq.c index f7f16e7..df03611 100644 --- a/drivers/char/drm/i915_irq.c +++ b/drivers/char/drm/i915_irq.c @@ -62,11 +62,11 @@ static void i915_vblank_tasklet(struct drm_device *dev) u32 ropcpp = (0xcc << 16) | ((cpp - 1) << 24); RING_LOCALS; - if (sarea_priv->front_tiled) { + if (IS_I965G(dev) && sarea_priv->front_tiled) { cmd |= XY_SRC_COPY_BLT_DST_TILED; dst_pitch >>= 2; } - if (sarea_priv->back_tiled) { + if (IS_I965G(dev) && sarea_priv->back_tiled) { cmd |= XY_SRC_COPY_BLT_SRC_TILED; src_pitch >>= 2; } -- cgit v0.10.2 From 3e2a078ca6a0d3122bbf2b904cd7ccf21a5ca21d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Mon, 30 Jun 2008 17:40:08 +0100 Subject: tty: Fix inverted logic in send_break Not sure how this came to get inverted but it appears to have been my mess up. Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index e94bee0..7501310 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -3322,7 +3322,7 @@ static int send_break(struct tty_struct *tty, unsigned int duration) msleep_interruptible(duration); tty->ops->break_ctl(tty, 0); tty_write_unlock(tty); - if (!signal_pending(current)) + if (signal_pending(current)) return -EINTR; return 0; } -- cgit v0.10.2 From 216705d2720dedf630b55d641737f430ead0c228 Mon Sep 17 00:00:00 2001 From: Hugh Dickins Date: Wed, 2 Jul 2008 22:48:03 +0100 Subject: x86: fix Intel Mac booting with EFI Fedora reports that mem_init()'s zap_low_mappings(), extended to SMP in 61165d7a035f6571c7576e7f51e7230157724c8d x86: fix app crashes after SMP resume causes 32-bit Intel Mac machines to reboot very early when booting with EFI. The EFI code appears to manage low mappings for itself when needed; but like many before it, confuses PSE with PAE. So it has only been mapping half the space it needed when PSE but not PAE. This remained unnoticed until we moved the SMP zap_low_mappings() before efi_enter_virtual_mode(). Presumably could have been noticed years ago if anyone ran a UP kernel on such machines? Reported-by: Peter Jones Signed-off-by: Hugh Dickins Cc: Peter Jones Cc: Glauber Costa Cc: Andrew Morton Cc: Linus Torvalds Signed-off-by: Ingo Molnar Tested-by: Peter Jones diff --git a/arch/x86/kernel/efi_32.c b/arch/x86/kernel/efi_32.c index 5d23d85..4b63c8e 100644 --- a/arch/x86/kernel/efi_32.c +++ b/arch/x86/kernel/efi_32.c @@ -49,13 +49,13 @@ void efi_call_phys_prelog(void) local_irq_save(efi_rt_eflags); /* - * If I don't have PSE, I should just duplicate two entries in page - * directory. If I have PSE, I just need to duplicate one entry in + * If I don't have PAE, I should just duplicate two entries in page + * directory. If I have PAE, I just need to duplicate one entry in * page directory. */ cr4 = read_cr4(); - if (cr4 & X86_CR4_PSE) { + if (cr4 & X86_CR4_PAE) { efi_bak_pg_dir_pointer[0].pgd = swapper_pg_dir[pgd_index(0)].pgd; swapper_pg_dir[0].pgd = @@ -93,7 +93,7 @@ void efi_call_phys_epilog(void) cr4 = read_cr4(); - if (cr4 & X86_CR4_PSE) { + if (cr4 & X86_CR4_PAE) { swapper_pg_dir[pgd_index(0)].pgd = efi_bak_pg_dir_pointer[0].pgd; } else { -- cgit v0.10.2 From 27df66a406a171308b138bd84938cb735392e15c Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 3 Jul 2008 10:14:10 +0200 Subject: arch/x86/mm/init_64.c: early_memtest(): fix types fix this warning: arch/x86/mm/init_64.c: In function 'early_memtest': arch/x86/mm/init_64.c:524: warning: passing argument 2 of 'find_e820_area_size' from incompatible pointer type Signed-off-by: Ingo Molnar diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index f6d20be..819dad9 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -506,7 +506,7 @@ early_param("memtest", parse_memtest); static void __init early_memtest(unsigned long start, unsigned long end) { - unsigned long t_start, t_size; + u64 t_start, t_size; unsigned pattern; if (!memtest_pattern) @@ -525,8 +525,9 @@ static void __init early_memtest(unsigned long start, unsigned long end) if (t_start + t_size > end) t_size = end - t_start; - printk(KERN_CONT "\n %016lx - %016lx pattern %d", - t_start, t_start + t_size, pattern); + printk(KERN_CONT "\n %016llx - %016llx pattern %d", + (unsigned long long)t_start, + (unsigned long long)t_start + t_size, pattern); memtest(t_start, t_size, pattern); -- cgit v0.10.2 From 2e4bef41a0f7df31be140ef354b9c12f2299016a Mon Sep 17 00:00:00 2001 From: Eric Van Hensbergen Date: Tue, 24 Jun 2008 17:39:39 -0500 Subject: 9p: fix O_APPEND in legacy mode The legacy protocol's open operation doesn't handle an append operation (it is expected that the client take care of it). We were incorrectly passing the extended protocol's flag through even in legacy mode. This was reported in bugzilla report #10689. This patch fixes the problem by disallowing extended protocol open modes from being passed in legacy mode and implemented append functionality on the client side by adding a seek after the open. Signed-off-by: Eric Van Hensbergen diff --git a/fs/9p/v9fs_vfs.h b/fs/9p/v9fs_vfs.h index fd01d90..57997fa 100644 --- a/fs/9p/v9fs_vfs.h +++ b/fs/9p/v9fs_vfs.h @@ -51,4 +51,4 @@ int v9fs_dir_release(struct inode *inode, struct file *filp); int v9fs_file_open(struct inode *inode, struct file *file); void v9fs_inode2stat(struct inode *inode, struct p9_stat *stat); void v9fs_dentry_release(struct dentry *); -int v9fs_uflags2omode(int uflags); +int v9fs_uflags2omode(int uflags, int extended); diff --git a/fs/9p/vfs_file.c b/fs/9p/vfs_file.c index 0d55aff..52944d2 100644 --- a/fs/9p/vfs_file.c +++ b/fs/9p/vfs_file.c @@ -59,7 +59,7 @@ int v9fs_file_open(struct inode *inode, struct file *file) P9_DPRINTK(P9_DEBUG_VFS, "inode: %p file: %p \n", inode, file); v9ses = v9fs_inode2v9ses(inode); - omode = v9fs_uflags2omode(file->f_flags); + omode = v9fs_uflags2omode(file->f_flags, v9fs_extended(v9ses)); fid = file->private_data; if (!fid) { fid = v9fs_fid_clone(file->f_path.dentry); @@ -75,6 +75,8 @@ int v9fs_file_open(struct inode *inode, struct file *file) inode->i_size = 0; inode->i_blocks = 0; } + if ((file->f_flags & O_APPEND) && (!v9fs_extended(v9ses))) + generic_file_llseek(file, 0, SEEK_END); } file->private_data = fid; diff --git a/fs/9p/vfs_inode.c b/fs/9p/vfs_inode.c index 40fa807..c95295c 100644 --- a/fs/9p/vfs_inode.c +++ b/fs/9p/vfs_inode.c @@ -132,10 +132,10 @@ static int p9mode2unixmode(struct v9fs_session_info *v9ses, int mode) /** * v9fs_uflags2omode- convert posix open flags to plan 9 mode bits * @uflags: flags to convert - * + * @extended: if .u extensions are active */ -int v9fs_uflags2omode(int uflags) +int v9fs_uflags2omode(int uflags, int extended) { int ret; @@ -155,14 +155,16 @@ int v9fs_uflags2omode(int uflags) break; } - if (uflags & O_EXCL) - ret |= P9_OEXCL; - if (uflags & O_TRUNC) ret |= P9_OTRUNC; - if (uflags & O_APPEND) - ret |= P9_OAPPEND; + if (extended) { + if (uflags & O_EXCL) + ret |= P9_OEXCL; + + if (uflags & O_APPEND) + ret |= P9_OAPPEND; + } return ret; } @@ -506,7 +508,7 @@ v9fs_vfs_create(struct inode *dir, struct dentry *dentry, int mode, flags = O_RDWR; fid = v9fs_create(v9ses, dir, dentry, NULL, perm, - v9fs_uflags2omode(flags)); + v9fs_uflags2omode(flags, v9fs_extended(v9ses))); if (IS_ERR(fid)) { err = PTR_ERR(fid); fid = NULL; -- cgit v0.10.2 From 41d54d3bf83f62d3ff5948cb788fe6007e66a0d0 Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Thu, 3 Jul 2008 09:14:26 -0500 Subject: slub: Do not use 192 byte sized cache if minimum alignment is 128 byte The 192 byte cache is not necessary if we have a basic alignment of 128 byte. If it would be used then the 192 would be aligned to the next 128 byte boundary which would result in another 256 byte cache. Two 256 kmalloc caches cause sysfs to complain about a duplicate entry. MIPS needs 128 byte aligned kmalloc caches and spits out warnings on boot without this patch. Signed-off-by: Christoph Lameter Signed-off-by: Pekka Enberg diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index 71e43a1..cef6f8f 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -137,10 +137,12 @@ static __always_inline int kmalloc_index(size_t size) if (size <= KMALLOC_MIN_SIZE) return KMALLOC_SHIFT_LOW; +#if KMALLOC_MIN_SIZE <= 64 if (size > 64 && size <= 96) return 1; if (size > 128 && size <= 192) return 2; +#endif if (size <= 8) return 3; if (size <= 16) return 4; if (size <= 32) return 5; diff --git a/mm/slub.c b/mm/slub.c index 0987d1c..2c9a62d 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -2995,8 +2995,6 @@ void __init kmem_cache_init(void) create_kmalloc_cache(&kmalloc_caches[1], "kmalloc-96", 96, GFP_KERNEL); caches++; - } - if (KMALLOC_MIN_SIZE <= 128) { create_kmalloc_cache(&kmalloc_caches[2], "kmalloc-192", 192, GFP_KERNEL); caches++; @@ -3026,6 +3024,16 @@ void __init kmem_cache_init(void) for (i = 8; i < KMALLOC_MIN_SIZE; i += 8) size_index[(i - 1) / 8] = KMALLOC_SHIFT_LOW; + if (KMALLOC_MIN_SIZE == 128) { + /* + * The 192 byte sized cache is not used if the alignment + * is 128 byte. Redirect kmalloc to use the 256 byte cache + * instead. + */ + for (i = 128 + 8; i <= 192; i += 8) + size_index[(i - 1) / 8] = 8; + } + slab_state = UP; /* Provide the correct kmalloc names now that the caches are up */ -- cgit v0.10.2 From 494de90098784b8e2797598cefdd34188884ec2e Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 3 Jul 2008 05:27:51 +0100 Subject: Do not overwrite nr_zones on !NUMA when initialising zlcache_ptr The non-NUMA case of build_zonelist_cache() would initialize the zlcache_ptr for both node_zonelists[] to NULL. Which is problematic, since non-NUMA only has a single node_zonelists[] entry, and trying to zero the non-existent second one just overwrote the nr_zones field instead. As kswapd uses this value to determine what reclaim work is necessary, the result is that kswapd never reclaims. This causes processes to stall frequently in low-memory situations as they always direct reclaim. This patch initialises zlcache_ptr correctly. Signed-off-by: Mel Gorman Tested-by: Dan Williams [ Simplified patch a bit ] Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 2f55295..f32fae3 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2328,7 +2328,6 @@ static void build_zonelists(pg_data_t *pgdat) static void build_zonelist_cache(pg_data_t *pgdat) { pgdat->node_zonelists[0].zlcache_ptr = NULL; - pgdat->node_zonelists[1].zlcache_ptr = NULL; } #endif /* CONFIG_NUMA */ -- cgit v0.10.2 From 1faf7f25b2aa4fcd2ae0ec2fd2e9fb9ff4bfee10 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 24 Jun 2008 00:48:05 +0200 Subject: [MIPS] IP32: Fix unexpected irq 71 It's possible that the crime interrupt handler is called without pending interrupts (probably a hardware issue). To avoid irritating "unexpected irq 71" messages, we now just ignore the spurious crime interrupts. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c index b0ea0e4..0d6b666 100644 --- a/arch/mips/sgi-ip32/ip32-irq.c +++ b/arch/mips/sgi-ip32/ip32-irq.c @@ -425,6 +425,11 @@ static void ip32_irq0(void) BUILD_BUG_ON(MACEISA_SERIAL2_RDMAOR_IRQ - MACEISA_AUDIO_SW_IRQ != 31); crime_int = crime->istat & crime_mask; + + /* crime sometime delivers spurious interrupts, ignore them */ + if (unlikely(crime_int == 0)) + return; + irq = MACE_VID_IN1_IRQ + __ffs(crime_int); if (crime_int & CRIME_MACEISA_INT_MASK) { -- cgit v0.10.2 From 7e3297dc280f88ec0c6619a895f3d449776f952e Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Fri, 27 Jun 2008 23:52:26 +0200 Subject: [MIPS] IP22: Fix crashes due to wrong L1_CACHE_BYTES The introduction of a real dma cache invalidate makes it important to have a correct cache line size, otherwise the kernel will gives out two memory segment, which might share one cache line. The R4400 Indy/Indigo2 CPU modules are using a second level cache line size of 128 bytes, so MIPS_L1_CACHE_SHIFT needs to be bumped up to 7 for IP22. Signed-off-by: Thomas Bogendoerfer Signed-off-by: Ralf Baechle diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index e5a7c5d..24c5dee 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -1006,7 +1006,7 @@ config BOOT_ELF32 config MIPS_L1_CACHE_SHIFT int default "4" if MACH_DECSTATION - default "7" if SGI_IP27 || SGI_IP28 || SNI_RM + default "7" if SGI_IP22 || SGI_IP27 || SGI_IP28 || SNI_RM default "4" if PMC_MSP4200_EVAL default "5" -- cgit v0.10.2 From 8986d2f50e1a9ba63f64ccbf59181886aa7898c3 Mon Sep 17 00:00:00 2001 From: Atsushi Nemoto Date: Tue, 24 Jun 2008 23:26:38 +0900 Subject: [MIPS] cevt-txx9: Reset timer counter on initialization The txx9_tmr_init() will not clear a timer counter register in a certain case. The counter register is cleared on 1->0 transition of TCE bit if CRE=1. So just clearing the TCE bit is not enough. Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/cevt-txx9.c b/arch/mips/kernel/cevt-txx9.c index 795cb8f..b5fc4eb 100644 --- a/arch/mips/kernel/cevt-txx9.c +++ b/arch/mips/kernel/cevt-txx9.c @@ -161,6 +161,9 @@ void __init txx9_tmr_init(unsigned long baseaddr) struct txx9_tmr_reg __iomem *tmrptr; tmrptr = ioremap(baseaddr, sizeof(struct txx9_tmr_reg)); + /* Start once to make CounterResetEnable effective */ + __raw_writel(TXx9_TMTCR_CRE | TXx9_TMTCR_TCE, &tmrptr->tcr); + /* Stop and reset the counter */ __raw_writel(TXx9_TMTCR_CRE, &tmrptr->tcr); __raw_writel(0, &tmrptr->tisr); __raw_writel(0xffffffff, &tmrptr->cpra); -- cgit v0.10.2 From ee3ece830f6db9837f7ac67008f532a8c1e755f4 Mon Sep 17 00:00:00 2001 From: Steven Rostedt Date: Thu, 3 Jul 2008 14:31:26 -0400 Subject: hrtimer: prevent migration for raising softirq Due to a possible deadlock, the waking of the softirq was pushed outside of the hrtimer base locks. See commit 0c96c5979a522c3323c30a078a70120e29b5bdbc Unfortunately this allows the task to migrate after setting up the softirq and raising it. Since softirqs run a queue that is per-cpu we may raise the softirq on the wrong CPU and this will keep the queued softirq task from running. To solve this issue, this patch disables preemption around the releasing of the hrtimer lock and raising of the softirq. Signed-off-by: Steven Rostedt Signed-off-by: Linus Torvalds diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 421be5f..ab80515 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -1003,10 +1003,18 @@ hrtimer_start(struct hrtimer *timer, ktime_t tim, const enum hrtimer_mode mode) */ raise = timer->state == HRTIMER_STATE_PENDING; + /* + * We use preempt_disable to prevent this task from migrating after + * setting up the softirq and raising it. Otherwise, if me migrate + * we will raise the softirq on the wrong CPU. + */ + preempt_disable(); + unlock_hrtimer_base(timer, &flags); if (raise) hrtimer_raise_softirq(); + preempt_enable(); return ret; } -- cgit v0.10.2 From b620754bfeb8b0e0c6622b03d5ee2f1af1d3082f Mon Sep 17 00:00:00 2001 From: "J. Bruce Fields" Date: Thu, 3 Jul 2008 15:26:35 -0400 Subject: svcrpc: fix handling of garbage args To return garbage_args, the accept_stat must be 0, and we must have a verifier. So we shouldn't be resetting the write pointer as we reject the call. Also, we must add the two placeholder words here regardless of success of the unwrap, to ensure the output buffer is left in a consistent state for svcauth_gss_release(). This fixes a BUG() in svcauth_gss.c:svcauth_gss_release(). Thanks to Aime Le Rouzic for bug report, debugging help, and testing. Signed-off-by: J. Bruce Fields Tested-by: Aime Le Rouzic Signed-off-by: Linus Torvalds diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c index 5905d56..81ae3d6 100644 --- a/net/sunrpc/auth_gss/svcauth_gss.c +++ b/net/sunrpc/auth_gss/svcauth_gss.c @@ -1144,20 +1144,20 @@ svcauth_gss_accept(struct svc_rqst *rqstp, __be32 *authp) case RPC_GSS_SVC_NONE: break; case RPC_GSS_SVC_INTEGRITY: + /* placeholders for length and seq. number: */ + svc_putnl(resv, 0); + svc_putnl(resv, 0); if (unwrap_integ_data(&rqstp->rq_arg, gc->gc_seq, rsci->mechctx)) goto garbage_args; + break; + case RPC_GSS_SVC_PRIVACY: /* placeholders for length and seq. number: */ svc_putnl(resv, 0); svc_putnl(resv, 0); - break; - case RPC_GSS_SVC_PRIVACY: if (unwrap_priv_data(rqstp, &rqstp->rq_arg, gc->gc_seq, rsci->mechctx)) goto garbage_args; - /* placeholders for length and seq. number: */ - svc_putnl(resv, 0); - svc_putnl(resv, 0); break; default: goto auth_err; @@ -1170,8 +1170,6 @@ svcauth_gss_accept(struct svc_rqst *rqstp, __be32 *authp) goto out; } garbage_args: - /* Restore write pointer to its original value: */ - xdr_ressize_check(rqstp, reject_stat); ret = SVC_GARBAGE; goto out; auth_err: -- cgit v0.10.2 From 3ee38d8bf46b364b1ca364ddb7c379a4afcd8bbb Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sun, 8 Jun 2008 17:20:11 +0100 Subject: OHCI: Fix problem if SM501 and another platform driver is selected If the SM501 and another platform driver, such as the SM501 then we end up defining PLATFORM_DRIVER twice. This patch seperated the SM501 onto a seperate define of SM501_OHCI_DRIVER so that it can be selected without overwriting the original definition. Signed-off-by: Ben Dooks Acked-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 33f1c1c..a8160d6 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1054,7 +1054,7 @@ MODULE_LICENSE ("GPL"); #ifdef CONFIG_MFD_SM501 #include "ohci-sm501.c" -#define PLATFORM_DRIVER ohci_hcd_sm501_driver +#define SM501_OHCI_DRIVER ohci_hcd_sm501_driver #endif #if !defined(PCI_DRIVER) && \ @@ -1062,6 +1062,7 @@ MODULE_LICENSE ("GPL"); !defined(OF_PLATFORM_DRIVER) && \ !defined(SA1111_DRIVER) && \ !defined(PS3_SYSTEM_BUS_DRIVER) && \ + !defined(SM501_OHCI_DRIVER) && \ !defined(SSB_OHCI_DRIVER) #error "missing bus glue for ohci-hcd" #endif @@ -1121,9 +1122,18 @@ static int __init ohci_hcd_mod_init(void) goto error_ssb; #endif +#ifdef SM501_OHCI_DRIVER + retval = platform_driver_register(&SM501_OHCI_DRIVER); + if (retval < 0) + goto error_sm501; +#endif + return retval; /* Error path */ +#ifdef SM501_OHCI_DRIVER + error_sm501: +#endif #ifdef SSB_OHCI_DRIVER error_ssb: #endif @@ -1159,6 +1169,9 @@ module_init(ohci_hcd_mod_init); static void __exit ohci_hcd_mod_exit(void) { +#ifdef SM501_OHCI_DRIVER + platform_driver_unregister(&SM501_OHCI_DRIVER); +#endif #ifdef SSB_OHCI_DRIVER ssb_driver_unregister(&SSB_OHCI_DRIVER); #endif -- cgit v0.10.2 From 4b828abed217527ca815727a1a251334bd8e5e04 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 17 Jun 2008 22:30:48 +0200 Subject: USB: fix cdc-acm resume() cdc-acm has - a memory leak in resume() - will fail to reactivate the read code path if this is needed. his corrects it by deleting the useless relict code. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 63c3404..c3201aff 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1125,9 +1125,6 @@ static void stop_data_traffic(struct acm *acm) for (i = 0; i < acm->rx_buflimit; i++) usb_kill_urb(acm->ru[i].urb); - INIT_LIST_HEAD(&acm->filled_read_bufs); - INIT_LIST_HEAD(&acm->spare_read_bufs); - tasklet_enable(&acm->urb_task); cancel_work_sync(&acm->work); -- cgit v0.10.2 From 056761e55c8687ddf3db14226213f2e8dc2689bc Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 13 Jun 2008 23:56:48 -0700 Subject: USB: ehci - fix timer regression This patch fixes a regression in the EHCI driver's TIMER_IO_WATCHDOG behavior. The patch "USB: EHCI: add separate IAA watchdog timer" changed how that timer is handled, so that short timeouts on the remaining timer (unfortunately, overloaded) would never be used. This takes a more direct approach, reorganizing the code slightly to be explicit about only the I/O watchdog role now being overridable. It also replaces a now-obsolete comment describing older timer behavior. Signed-off-by: David Brownell Cc: Alan Stern Cc: Leonid Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 35a0309..90245fd 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -177,6 +177,15 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action) static inline void timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) { + /* Don't override timeouts which shrink or (later) disable + * the async ring; just the I/O watchdog. Note that if a + * SHRINK were pending, OFF would never be requested. + */ + if (timer_pending(&ehci->watchdog) + && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) + & ehci->actions)) + return; + if (!test_and_set_bit (action, &ehci->actions)) { unsigned long t; @@ -192,15 +201,7 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) t = EHCI_SHRINK_JIFFIES; break; } - t += jiffies; - // all timings except IAA watchdog can be overridden. - // async queue SHRINK often precedes IAA. while it's ready - // to go OFF neither can matter, and afterwards the IO - // watchdog stops unless there's still periodic traffic. - if (time_before_eq(t, ehci->watchdog.expires) - && timer_pending (&ehci->watchdog)) - return; - mod_timer (&ehci->watchdog, t); + mod_timer(&ehci->watchdog, t + jiffies); } } -- cgit v0.10.2 From 29c8f6a727a683b5988877dd80dbdefd49e64a51 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 13 Jun 2008 23:59:54 -0700 Subject: USB: ohci - record data toggle after unlink This patch fixes a problem with OHCI where canceling bulk or interrupt URBs may lose track of the right data toggle. This seems to be a longstanding bug, possibly dating back to the Linux 2.4 kernel, which stayed hidden because (a) about half the time the data toggle bit was correct; (b) canceling such URBs is unusual; and (c) the few drivers which cancel these URBs either [1] do it only as part of shutting down, or [2] have fault recovery logic, which recovers. For those transfer types, the toggle is normally written back into the ED when each TD is retired. But canceling bypasses the mechanism used to retire TDs ... so on average, half the time the toggle bit will be invalid after cancelation. The fix is simple: the toggle state of any canceled TDs are propagated back to the ED in the finish_unlinks function. (Issue found by leonidv11@gmail.com ...) Signed-off-by: David Brownell Cc: Leonid Cc: stable Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/host/ohci-q.c b/drivers/usb/host/ohci-q.c index 9c9f3b5..9b54740 100644 --- a/drivers/usb/host/ohci-q.c +++ b/drivers/usb/host/ohci-q.c @@ -952,6 +952,7 @@ rescan_this: struct urb *urb; urb_priv_t *urb_priv; __hc32 savebits; + u32 tdINFO; td = list_entry (entry, struct td, td_list); urb = td->urb; @@ -966,6 +967,17 @@ rescan_this: savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK); *prev = td->hwNextTD | savebits; + /* If this was unlinked, the TD may not have been + * retired ... so manually save the data toggle. + * The controller ignores the value we save for + * control and ISO endpoints. + */ + tdINFO = hc32_to_cpup(ohci, &td->hwINFO); + if ((tdINFO & TD_T) == TD_T_DATA0) + ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C); + else if ((tdINFO & TD_T) == TD_T_DATA1) + ed->hwHeadP |= cpu_to_hc32(ohci, ED_C); + /* HC may have partly processed this TD */ td_done (ohci, urb, td); urb_priv->td_cnt++; -- cgit v0.10.2 From e72616f429a6aaa720a2d90b8fe94869f3c3ff4b Mon Sep 17 00:00:00 2001 From: matthieu castet Date: Mon, 16 Jun 2008 19:49:06 +0200 Subject: USB: mass storage: new id for US_SC_CYP_ATACB CY7C68310 chip also support cypress atacb "ATA command" pass_thru. Signed-off-by: Matthieu CASTET Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 45fe366..39a7c11 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -402,11 +402,19 @@ UNUSUAL_DEV( 0x04a5, 0x3010, 0x0100, 0x0100, US_FL_IGNORE_RESIDUE ), #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB +/* CY7C68300 : support atacb */ UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, "Cypress", "Cypress AT2LP", US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), + +/* CY7C68310 : support atacb and atacb2 */ +UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, + "Cypress", + "Cypress ISD-300LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, + 0), #endif /* Reported by Simon Levitt -- cgit v0.10.2 From f15e39739a1d7dfaa2173a91707a74c11a246648 Mon Sep 17 00:00:00 2001 From: Will Newton Date: Fri, 27 Jun 2008 13:08:08 +0100 Subject: sisusbvga: Fix oops on disconnect. Remove dev_info call on disconnect. The sisusb_dev pointer may have been set to zero by sisusb_delete at this point causing an oops. The message does not provide any extra information over the standard USB subsystem output so removing it does not affect functionality. Signed-off-by: Will Newton Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index cb7fa0e..33182f4 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -3264,8 +3264,6 @@ static void sisusb_disconnect(struct usb_interface *intf) /* decrement our usage count */ kref_put(&sisusb->kref, sisusb_delete); - - dev_info(&sisusb->sisusb_dev->dev, "Disconnected\n"); } static struct usb_device_id sisusb_table [] = { -- cgit v0.10.2 From 2542335ccf34cfb442d3fd842d7e78ca5e649951 Mon Sep 17 00:00:00 2001 From: Jon K Hellan Date: Tue, 24 Jun 2008 11:43:13 +0200 Subject: USB: New device ID for ftdi_sio driver Here's a new device ID for the ftdio_sio driver. The diff is with linus's tree as of this morning. The device is the RigExpert Tiny USB Soundcard Transceiver Interface for ham radio. (I didn't actually test this. A fellow ham couldn't get the device to work, and I suggested binding the device ID using sysfs - see "http://jk.ufisa.uninett.no/usb/". However, he had had moved on to other things by then. I guess adding the device ID to the kernel "on spec" won't hurt. The relevant part of cat /proc/bus/usb/devices shows: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0403 ProdID=ed22 Rev= 5.00 S: Manufacturer=FTDI S: Product=MixW RigExpert Tiny S: SerialNumber=00000000 C:* #Ifs= 2 Cfg#= 1 Atr=80 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms ) From: Jon K Hellan Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 5234e7a..0ff4a39 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -637,6 +637,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID), .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) }, + { USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 06e0eca..8302eca 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -828,6 +828,9 @@ /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 +/* Rig Expert Ukraine devices */ +#define FTDI_REU_TINY_PID 0xED22 /* RigExpert Tiny */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v0.10.2 From de85422b94ddb23c021126815ea49414047c13dc Mon Sep 17 00:00:00 2001 From: Stefan Becker Date: Tue, 1 Jul 2008 19:19:22 +0300 Subject: USB: fix interrupt disabling for HCDs with shared interrupt handlers USB: fix interrupt disabling for HCDs with shared interrupt handlers As has been discussed several times on LKML, IRQF_SHARED | IRQF_DISABLED doesn't work reliably, i.e. a shared interrupt handler CAN'T be certain to be called with interrupts disabled. Most USB HCD handlers use IRQF_DISABLED and therefore havoc can break out if they share their interrupt with a handler that doesn't use it. On my test machine the yenta_socket interrupt handler (no IRQF_DISABLED) was registered before ehci_hcd and one uhci_hcd instance. Therefore all usb_hcd_irq() invocations for ehci_hcd and for one uhci_hcd instance happened with interrupts enabled. That led to random lockups as USB core HCD functions that acquire the same spinlock could be called twice from interrupt handlers. This patch updates usb_hcd_irq() to always disable/restore interrupts. usb_add_hcd() will silently remove any IRQF_DISABLED requested from HCD code. Signed-off-by: Stefan Becker Cc: stable Acked-by: David Brownell Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 09a53e7..7158dbb 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -1684,19 +1684,30 @@ EXPORT_SYMBOL_GPL(usb_bus_start_enum); irqreturn_t usb_hcd_irq (int irq, void *__hcd) { struct usb_hcd *hcd = __hcd; - int start = hcd->state; + unsigned long flags; + irqreturn_t rc; - if (unlikely(start == HC_STATE_HALT || - !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) - return IRQ_NONE; - if (hcd->driver->irq (hcd) == IRQ_NONE) - return IRQ_NONE; + /* IRQF_DISABLED doesn't work correctly with shared IRQs + * when the first handler doesn't use it. So let's just + * assume it's never used. + */ + local_irq_save(flags); - set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); + if (unlikely(hcd->state == HC_STATE_HALT || + !test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))) { + rc = IRQ_NONE; + } else if (hcd->driver->irq(hcd) == IRQ_NONE) { + rc = IRQ_NONE; + } else { + set_bit(HCD_FLAG_SAW_IRQ, &hcd->flags); - if (unlikely(hcd->state == HC_STATE_HALT)) - usb_hc_died (hcd); - return IRQ_HANDLED; + if (unlikely(hcd->state == HC_STATE_HALT)) + usb_hc_died(hcd); + rc = IRQ_HANDLED; + } + + local_irq_restore(flags); + return rc; } /*-------------------------------------------------------------------------*/ @@ -1860,6 +1871,13 @@ int usb_add_hcd(struct usb_hcd *hcd, /* enable irqs just before we start the controller */ if (hcd->driver->irq) { + + /* IRQF_DISABLED doesn't work as advertised when used together + * with IRQF_SHARED. As usb_hcd_irq() will always disable + * interrupts we can remove it here. + */ + irqflags &= ~IRQF_DISABLED; + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", hcd->driver->description, hcd->self.busnum); if ((retval = request_irq(irqnum, &usb_hcd_irq, irqflags, -- cgit v0.10.2 From 1236edf1c70107a0d31b3fba0b2a8783615d0d24 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 1 Jul 2008 10:45:51 -0400 Subject: USB: don't lose disconnections during suspend This patch (as1111) fixes a bug in the hub driver. When a hub resumes, disconnections that occurred while the hub was suspended are lost. A completely different fix for this problem has already been accepted for 2.6.27; however the problem still needs to be handled in 2.6.26. Signed-off-by: Alan Stern Tested-by: Lukas Hejtmanek Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 94789be..512d2d5 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -713,18 +713,11 @@ static void hub_restart(struct usb_hub *hub, int type) } /* Was the power session lost while we were suspended? */ - switch (type) { - case HUB_RESET_RESUME: - portstatus = 0; - portchange = USB_PORT_STAT_C_CONNECTION; - break; + status = hub_port_status(hub, port1, &portstatus, &portchange); - case HUB_RESET: - case HUB_RESUME: - status = hub_port_status(hub, port1, - &portstatus, &portchange); - break; - } + /* If the device is gone, khubd will handle it later */ + if (status == 0 && !(portstatus & USB_PORT_STAT_CONNECTION)) + continue; /* For "USB_PERSIST"-enabled children we must * mark the child device for reset-resume and -- cgit v0.10.2 From d2e2affba4a3619df203d3be8d655ec48d00e3ec Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 1 Jul 2008 13:11:56 +0530 Subject: USB: another option device id Thanks to umesh b for the information here. Cc: umesh b Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 43cfde8..a73420d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -306,6 +306,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) }, { USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) }, { USB_DEVICE(KYOCERA_VENDOR_ID, KYOCERA_PRODUCT_KPC680) }, + { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6000)}, /* ZTE AC8700 */ { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, -- cgit v0.10.2 From 727df3569b358ef440683787c2b9fe8cc55a0954 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 2 Jul 2008 15:25:41 -0500 Subject: USB: add a pl2303 device id As reported by Ken A Scott Cc: Ken A Scott Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c index 103195a..2a0dd1b 100644 --- a/drivers/usb/serial/pl2303.c +++ b/drivers/usb/serial/pl2303.c @@ -57,6 +57,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_PHAROS) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_ALDIGA) }, { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_MMX) }, + { USB_DEVICE(PL2303_VENDOR_ID, PL2303_PRODUCT_ID_GPRS) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID) }, { USB_DEVICE(IODATA_VENDOR_ID, IODATA_PRODUCT_ID_RSAQ5) }, { USB_DEVICE(ATEN_VENDOR_ID, ATEN_PRODUCT_ID) }, diff --git a/drivers/usb/serial/pl2303.h b/drivers/usb/serial/pl2303.h index cff160a..6ac3bbc 100644 --- a/drivers/usb/serial/pl2303.h +++ b/drivers/usb/serial/pl2303.h @@ -15,6 +15,7 @@ #define PL2303_PRODUCT_ID_RSAQ3 0xaaa2 #define PL2303_PRODUCT_ID_ALDIGA 0x0611 #define PL2303_PRODUCT_ID_MMX 0x0612 +#define PL2303_PRODUCT_ID_GPRS 0x0609 #define ATEN_VENDOR_ID 0x0557 #define ATEN_VENDOR_ID2 0x0547 -- cgit v0.10.2 From 4edb966b375dfbabfc96b580a164c5ae90584aa0 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 3 Jul 2008 10:05:57 +0200 Subject: USB: fix Oops on loading ipaq module since 2.6.26 Fixes bugzilla.kernel.org #10868 Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index ea924dc..5e15dec 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -570,7 +570,7 @@ static struct usb_serial_driver ipaq_device = { .description = "PocketPC PDA", .usb_driver = &ipaq_driver, .id_table = ipaq_id_table, - .num_ports = 2, + .num_ports = 1, .open = ipaq_open, .close = ipaq_close, .attach = ipaq_startup, -- cgit v0.10.2 From b89cbb81aec2015b4020221564ced1569e1a8900 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 3 Jul 2008 17:14:16 +0200 Subject: USB: adding comment for ipaq forcing number of ports The reason for forcing a number of ports should be documented. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 5e15dec..d9fb376 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -570,6 +570,11 @@ static struct usb_serial_driver ipaq_device = { .description = "PocketPC PDA", .usb_driver = &ipaq_driver, .id_table = ipaq_id_table, + /* + * some devices have an extra endpoint, which + * must be ignored as it would make the core + * create a second port which oopses when used + */ .num_ports = 1, .open = ipaq_open, .close = ipaq_close, -- cgit v0.10.2 From 50952026036c7b4212b90091bf23a264c0ccc1fb Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Thu, 3 Jul 2008 23:28:35 +0100 Subject: [MIPS] Fix bug in atomic_sub_if_positive. The branch optimization fixes in 2.6.21 introduced a bug in atomic_sub_if_positive that causes it to return even when the sc instruction fails. The result is that e.g. down_trylock becomes unreliable as the semaphore counter is not always decremented. Original MUA-shredded patch from Morten Larsen . Signed-off-by: Ralf Baechle diff --git a/include/asm-mips/atomic.h b/include/asm-mips/atomic.h index a798d62..1232be3 100644 --- a/include/asm-mips/atomic.h +++ b/include/asm-mips/atomic.h @@ -283,10 +283,10 @@ static __inline__ int atomic_sub_if_positive(int i, atomic_t * v) " beqz %0, 2f \n" " subu %0, %1, %3 \n" " .set reorder \n" - "1: \n" " .subsection 2 \n" "2: b 1b \n" " .previous \n" + "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) @@ -664,10 +664,10 @@ static __inline__ long atomic64_sub_if_positive(long i, atomic64_t * v) " beqz %0, 2f \n" " dsubu %0, %1, %3 \n" " .set reorder \n" - "1: \n" " .subsection 2 \n" "2: b 1b \n" " .previous \n" + "1: \n" " .set mips0 \n" : "=&r" (result), "=&r" (temp), "=m" (v->counter) : "Ir" (i), "m" (v->counter) -- cgit v0.10.2 From d8355aca23863be659ec5b7e0393cfbfa91ec221 Mon Sep 17 00:00:00 2001 From: Jeremy Fitzhardinge Date: Thu, 3 Jul 2008 22:10:18 -0700 Subject: xen: fix address truncation in pte mfn<->pfn conversion When converting the page number in a pte/pmd/pud/pgd between machine and pseudo-physical addresses, the converted result was being truncated at 32-bits. This caused failures on machines with more than 4G of physical memory. Signed-off-by: Jeremy Fitzhardinge Cc: "Christopher S. Aker" Cc: Ian Campbell Signed-off-by: Ingo Molnar diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index df40bf7..4e527e7 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -185,7 +185,7 @@ static pteval_t pte_mfn_to_pfn(pteval_t val) if (val & _PAGE_PRESENT) { unsigned long mfn = (val & PTE_MASK) >> PAGE_SHIFT; pteval_t flags = val & ~PTE_MASK; - val = (mfn_to_pfn(mfn) << PAGE_SHIFT) | flags; + val = ((pteval_t)mfn_to_pfn(mfn) << PAGE_SHIFT) | flags; } return val; @@ -196,7 +196,7 @@ static pteval_t pte_pfn_to_mfn(pteval_t val) if (val & _PAGE_PRESENT) { unsigned long pfn = (val & PTE_MASK) >> PAGE_SHIFT; pteval_t flags = val & ~PTE_MASK; - val = (pfn_to_mfn(pfn) << PAGE_SHIFT) | flags; + val = ((pteval_t)pfn_to_mfn(pfn) << PAGE_SHIFT) | flags; } return val; -- cgit v0.10.2 From 464b3286b4aa459059c6fda85ba55185fd21d9fc Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 2 Jul 2008 17:50:23 +0900 Subject: sata_sil24: add DID for another adaptec flavor There's another DID used for Adaptec card. Add it. Reported by Travis Read. Signed-off-by: Tejun Heo Cc: Travis Read Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 8ee6b5b..84ffcc2 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -370,6 +370,7 @@ static const struct pci_device_id sil24_pci_tbl[] = { { PCI_VDEVICE(INTEL, 0x3124), BID_SIL3124 }, { PCI_VDEVICE(CMD, 0x3132), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x0242), BID_SIL3132 }, + { PCI_VDEVICE(CMD, 0x0244), BID_SIL3132 }, { PCI_VDEVICE(CMD, 0x3131), BID_SIL3131 }, { PCI_VDEVICE(CMD, 0x3531), BID_SIL3131 }, -- cgit v0.10.2 From ea0c62f7cf70f13a67830471b613337bd0c9a62e Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 28 Jun 2008 01:49:02 +0900 Subject: ahci: always clear all bits in irq_stat Some AHCI controllers (ICH7 was reported) set pending bit in HOST_IRQ_STAT for non-existent ports and when it's not cleared falls into IRQ storm. Always clear full irq_stat instead of only the bits that are handled. As nothing changes for recognized ports, the risk of breaking things is pretty low. Reported and verified by Philipp Thomas in the following suse bugzilla. https://bugzilla.novell.com/attachment.cgi?id=215692 Signed-off-by: Tejun Heo Cc: Philipp Thomas Signed-off-by: Jeff Garzik diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 6a4a2a2..061817a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; - u32 irq_stat, irq_ack = 0; + u32 irq_stat; VPRINTK("ENTER\n"); @@ -1809,14 +1809,11 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) "interrupt on disabled port %u\n", i); } - irq_ack |= (1 << i); - } - - if (irq_ack) { - writel(irq_ack, mmio + HOST_IRQ_STAT); handled = 1; } + writel(irq_stat, mmio + HOST_IRQ_STAT); + spin_unlock(&host->lock); VPRINTK("EXIT\n"); -- cgit v0.10.2 From a836d3e882161c562b3ddacee5d8842a033c5b2c Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 28 Jun 2008 01:39:43 +0900 Subject: libata-sff: improve HSM violation reporting Improve SFF HSM violation reporting such that each HSM violation can be distinguished using ehi_desc. Signed-off-by: Tejun Heo Signed-off-by: Jeff Garzik diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 215d186..c0908c2 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1094,6 +1094,7 @@ static void ata_hsm_qc_complete(struct ata_queued_cmd *qc, int in_wq) int ata_sff_hsm_move(struct ata_port *ap, struct ata_queued_cmd *qc, u8 status, int in_wq) { + struct ata_eh_info *ehi = &ap->link.eh_info; unsigned long flags = 0; int poll_next; @@ -1125,9 +1126,12 @@ fsm_start: if (likely(status & (ATA_ERR | ATA_DF))) /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else + else { /* HSM violation. Let EH handle this */ + ata_ehi_push_desc(ehi, + "ST_FIRST: !(DRQ|ERR|DF)"); qc->err_mask |= AC_ERR_HSM; + } ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1146,9 +1150,9 @@ fsm_start: * the CDB. */ if (!(qc->dev->horkage & ATA_HORKAGE_STUCK_ERR)) { - ata_port_printk(ap, KERN_WARNING, - "DRQ=1 with device error, " - "dev_stat 0x%X\n", status); + ata_ehi_push_desc(ehi, "ST_FIRST: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1205,9 +1209,9 @@ fsm_start: * let the EH abort the command or reset the device. */ if (unlikely(status & (ATA_ERR | ATA_DF))) { - ata_port_printk(ap, KERN_WARNING, "DRQ=1 with " - "device error, dev_stat 0x%X\n", - status); + ata_ehi_push_desc(ehi, "ST-ATAPI: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1226,13 +1230,17 @@ fsm_start: if (likely(status & (ATA_ERR | ATA_DF))) /* device stops HSM for abort/error */ qc->err_mask |= AC_ERR_DEV; - else + else { /* HSM violation. Let EH handle this. * Phantom devices also trigger this * condition. Mark hint. */ + ata_ehi_push_desc(ehi, "ST-ATA: " + "DRQ=1 with device error, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; + } ap->hsm_task_state = HSM_ST_ERR; goto fsm_start; @@ -1257,8 +1265,12 @@ fsm_start: status = ata_wait_idle(ap); } - if (status & (ATA_BUSY | ATA_DRQ)) + if (status & (ATA_BUSY | ATA_DRQ)) { + ata_ehi_push_desc(ehi, "ST-ATA: " + "BUSY|DRQ persists on ERR|DF, " + "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM; + } /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state -- cgit v0.10.2 From c7843e8f565f624b0cff7cad1370fad4cb84dfbc Mon Sep 17 00:00:00 2001 From: Mark Lord Date: Wed, 18 Jun 2008 21:57:42 -0400 Subject: sata_mv: safer logic for limit_warnings There is a miniscule chance that two separate host controllers might be in sata_mv at the same time and manage to decrement the static limit_warnings variable below zero. Fix the comparison to deal with it. Signed-off-by: Mark Lord Signed-off-by: Jeff Garzik diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 28092bc..ad169ff 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -1607,7 +1607,7 @@ static unsigned int mv_qc_issue(struct ata_queued_cmd *qc) * Much of the time, this could just work regardless. * So for now, just log the incident, and allow the attempt. */ - if (limit_warnings && (qc->nbytes / qc->sect_size) > 1) { + if (limit_warnings > 0 && (qc->nbytes / qc->sect_size) > 1) { --limit_warnings; ata_link_printk(qc->dev->link, KERN_WARNING, DRV_NAME ": attempting PIO w/multiple DRQ: " -- cgit v0.10.2 From 852bb9f594e0ea737f83487962a040ad210e8a13 Mon Sep 17 00:00:00 2001 From: Paul Mackerras Date: Fri, 4 Jul 2008 21:04:42 +1000 Subject: Update maintainers for powerpc This updates the MAINTAINERS entries for powerpc. It adds Ben H to the overall Linux for PowerPC entry and makes it clear this covers both 32-bit and 64-bit machines. It removes the separate entry we had for Linux on 64-bit PowerPC where Anton and I were listed as maintainers - Anton hasn't been involved in the day-to-day maintenance of the code for several years. Finally, it removes the entry for the Linux for PowerPC boot code where Tom Rini was listed as the maintainer. That code got completely rewritten when we merged 32-bit and 64-bit, and I and the various platform maintainers have been maintaining that code since. Signed-off-by: Paul Mackerras Acked-by: Tom Rini Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index e6c06fa..460e699 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2474,9 +2474,11 @@ M: James.Bottomley@HansenPartnership.com W: http://www.hansenpartnership.com/voyager S: Maintained -LINUX FOR POWERPC +LINUX FOR POWERPC (32-BIT AND 64-BIT) P: Paul Mackerras M: paulus@samba.org +P: Benjamin Herrenschmidt +M: benh@kernel.crashing.org W: http://www.penguinppc.org/ L: linuxppc-dev@ozlabs.org T: git kernel.org:/pub/scm/linux/kernel/git/paulus/powerpc.git @@ -2516,13 +2518,6 @@ W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex L: linuxppc-dev@ozlabs.org S: Maintained -LINUX FOR POWERPC BOOT CODE -P: Tom Rini -M: trini@kernel.crashing.org -W: http://www.penguinppc.org/ -L: linuxppc-dev@ozlabs.org -S: Maintained - LINUX FOR POWERPC EMBEDDED PPC8XX P: Vitaly Bordug M: vitb@kernel.crashing.org @@ -2551,17 +2546,6 @@ P: Arnaldo Carvalho de Melo M: acme@ghostprotocols.net S: Maintained -LINUX FOR 64BIT POWERPC -P: Paul Mackerras -M: paulus@samba.org -M: paulus@au.ibm.com -P: Anton Blanchard -M: anton@samba.org -M: anton@au.ibm.com -W: http://www.penguinppc.org/ppc64/ -L: linuxppc-dev@ozlabs.org -S: Supported - LINUX SECURITY MODULE (LSM) FRAMEWORK P: Chris Wright M: chrisw@sous-sol.org -- cgit v0.10.2 From cde53535991fbb5c34a1566f25955297c1487b8d Mon Sep 17 00:00:00 2001 From: Christoph Lameter Date: Fri, 4 Jul 2008 09:59:22 -0700 Subject: Christoph has moved Remove all clameter@sgi.com addresses from the kernel tree since they will become invalid on June 27th. Change my maintainer email address for the slab allocators to cl@linux-foundation.org (which will be the new email address for the future). Signed-off-by: Christoph Lameter Signed-off-by: Christoph Lameter Cc: Pekka Enberg Cc: Stephen Rothwell Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/vm/slabinfo.c b/Documentation/vm/slabinfo.c index e4230ed..df32276 100644 --- a/Documentation/vm/slabinfo.c +++ b/Documentation/vm/slabinfo.c @@ -1,7 +1,7 @@ /* * Slabinfo: Tool to get reports about slabs * - * (C) 2007 sgi, Christoph Lameter + * (C) 2007 sgi, Christoph Lameter * * Compile by: * @@ -99,7 +99,7 @@ void fatal(const char *x, ...) void usage(void) { - printf("slabinfo 5/7/2007. (c) 2007 sgi. clameter@sgi.com\n\n" + printf("slabinfo 5/7/2007. (c) 2007 sgi.\n\n" "slabinfo [-ahnpvtsz] [-d debugopts] [slab-regexp]\n" "-a|--aliases Show aliases\n" "-A|--activity Most active slabs first\n" diff --git a/Documentation/vm/slub.txt b/Documentation/vm/slub.txt index 7c13f22..bb1f5c6 100644 --- a/Documentation/vm/slub.txt +++ b/Documentation/vm/slub.txt @@ -266,4 +266,4 @@ of other objects. slub_debug=FZ,dentry -Christoph Lameter, , May 30, 2007 +Christoph Lameter, May 30, 2007 diff --git a/MAINTAINERS b/MAINTAINERS index 460e699..13b7b19 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3672,7 +3672,7 @@ S: Maintained SLAB ALLOCATOR P: Christoph Lameter -M: clameter@sgi.com +M: cl@linux-foundation.org P: Pekka Enberg M: penberg@cs.helsinki.fi P: Matt Mackall diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h index 85fd0aa..4ec0a29 100644 --- a/include/asm-generic/atomic.h +++ b/include/asm-generic/atomic.h @@ -2,7 +2,7 @@ #define _ASM_GENERIC_ATOMIC_H /* * Copyright (C) 2005 Silicon Graphics, Inc. - * Christoph Lameter + * Christoph Lameter * * Allows to provide arch independent atomic definitions without the need to * edit all arch specific atomic.h files. diff --git a/include/linux/slab.h b/include/linux/slab.h index c2ad350..9aa90a6 100644 --- a/include/linux/slab.h +++ b/include/linux/slab.h @@ -1,7 +1,7 @@ /* * Written by Mark Hemment, 1996 (markhe@nextd.demon.co.uk). * - * (C) SGI 2006, Christoph Lameter + * (C) SGI 2006, Christoph Lameter * Cleaned up and restructured to ease the addition of alternative * implementations of SLAB allocators. */ diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h index cef6f8f..d117ea2 100644 --- a/include/linux/slub_def.h +++ b/include/linux/slub_def.h @@ -4,7 +4,7 @@ /* * SLUB : A Slab allocator without object queues. * - * (C) 2007 SGI, Christoph Lameter + * (C) 2007 SGI, Christoph Lameter */ #include #include diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 29fc39f..ce77995 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -13,7 +13,7 @@ * Kai Petzke * Theodore Ts'o * - * Made to use alloc_percpu by Christoph Lameter . + * Made to use alloc_percpu by Christoph Lameter. */ #include diff --git a/lib/radix-tree.c b/lib/radix-tree.c index 169a2f8..56ec21a 100644 --- a/lib/radix-tree.c +++ b/lib/radix-tree.c @@ -1,7 +1,7 @@ /* * Copyright (C) 2001 Momchil Velikov * Portions Copyright (C) 2001 Christoph Hellwig - * Copyright (C) 2005 SGI, Christoph Lameter + * Copyright (C) 2005 SGI, Christoph Lameter * Copyright (C) 2006 Nick Piggin * * This program is free software; you can redistribute it and/or diff --git a/mm/allocpercpu.c b/mm/allocpercpu.c index f4026ba..05f2b40 100644 --- a/mm/allocpercpu.c +++ b/mm/allocpercpu.c @@ -1,7 +1,7 @@ /* * linux/mm/allocpercpu.c * - * Separated from slab.c August 11, 2006 Christoph Lameter + * Separated from slab.c August 11, 2006 Christoph Lameter */ #include #include diff --git a/mm/migrate.c b/mm/migrate.c index 112bcae..55bd355 100644 --- a/mm/migrate.c +++ b/mm/migrate.c @@ -9,7 +9,7 @@ * IWAMOTO Toshihiro * Hirokazu Takahashi * Dave Hansen - * Christoph Lameter + * Christoph Lameter */ #include diff --git a/mm/slub.c b/mm/slub.c index 2c9a62d..1a427c0 100644 --- a/mm/slub.c +++ b/mm/slub.c @@ -5,7 +5,7 @@ * The allocator synchronizes using per slab locks and only * uses a centralized lock to manage a pool of partial slabs. * - * (C) 2007 SGI, Christoph Lameter + * (C) 2007 SGI, Christoph Lameter */ #include diff --git a/mm/sparse-vmemmap.c b/mm/sparse-vmemmap.c index 99c4f36..a91b5f8 100644 --- a/mm/sparse-vmemmap.c +++ b/mm/sparse-vmemmap.c @@ -1,7 +1,7 @@ /* * Virtual Memory Map support * - * (C) 2007 sgi. Christoph Lameter . + * (C) 2007 sgi. Christoph Lameter. * * Virtual memory maps allow VM primitives pfn_to_page, page_to_pfn, * virt_to_page, page_address() to be implemented as a base offset -- cgit v0.10.2 From 251b97f552b1ad414cc5a9ccc8e4e94503edd5fc Mon Sep 17 00:00:00 2001 From: Peter Zijlstra Date: Fri, 4 Jul 2008 09:59:24 -0700 Subject: mm: dirty page accounting vs VM_MIXEDMAP Dirty page accounting accurately measures the amound of dirty pages in writable shared mappings by mapping the pages RO (as indicated by vma_wants_writenotify). We then trap on first write and call set_page_dirty() on the page, after which we map the page RW and continue execution. When we launder dirty pages, we call clear_page_dirty_for_io() which clears both the dirty flag, and maps the page RO again before we start writeout so that the story can repeat itself. vma_wants_writenotify() excludes VM_PFNMAP on the basis that we cannot do the regular dirty page stuff on raw PFNs and the memory isn't going anywhere anyway. The recently introduced VM_MIXEDMAP mixes both !pfn_valid() and pfn_valid() pages in a single mapping. We can't do dirty page accounting on !pfn_valid() pages as stated above, and mapping them RO causes them to be COW'ed on write, which breaks VM_SHARED semantics. Excluding VM_MIXEDMAP in vma_wants_writenotify() would mean we don't do the regular dirty page accounting for the pfn_valid() pages, which would bring back all the head-aches from inaccurate dirty page accounting. So instead, we let the !pfn_valid() pages get mapped RO, but fix them up unconditionally in the fault path. Signed-off-by: Peter Zijlstra Cc: Nick Piggin Acked-by: Hugh Dickins Cc: "Jared Hulbert" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index d14b251..350e646 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1697,8 +1697,19 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, struct page *dirty_page = NULL; old_page = vm_normal_page(vma, address, orig_pte); - if (!old_page) + if (!old_page) { + /* + * VM_MIXEDMAP !pfn_valid() case + * + * We should not cow pages in a shared writeable mapping. + * Just mark the pages writable as we can't do any dirty + * accounting on raw pfn maps. + */ + if ((vma->vm_flags & (VM_WRITE|VM_SHARED)) == + (VM_WRITE|VM_SHARED)) + goto reuse; goto gotten; + } /* * Take out anonymous pages first, anonymous shared vmas are @@ -1751,6 +1762,7 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma, } if (reuse) { +reuse: flush_cache_page(vma, address, pte_pfn(orig_pte)); entry = pte_mkyoung(orig_pte); entry = maybe_mkwrite(pte_mkdirty(entry), vma); -- cgit v0.10.2 From a01cc6570326c01e70619bf6540fb32139947c33 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 4 Jul 2008 09:59:26 -0700 Subject: rtc: rtc_read_alarm() handles wraparound While 0e36a9a4a788e4e92407774df76c545910810d35 ("rtc: fix readback from /sys/class/rtc/rtc?/wakealarm") made sure that active alarms were never returned with invalid "wildcard" fields (negative), it can still report (wrongly) that the alarm triggers in the past. Example, if it's now 10am, an alarm firing at 5am will be triggered TOMORROW not today. (Which may also be next month or next year...) This updates that alarm handling in three ways: * Handle alarm rollover in the common cases of RTCs that don't support matching on all date fields. * Skip the invalid-field logic when it's not needed. * Minor bugfix ... tm_isdst should be ignored, it's one of the fields Linux doesn't maintain. A warning is emitted for some of the unhandled rollover cases, but the possible combinations are a bit too numerous to handle every bit of potential hardware and firmware braindamage. Signed-off-by: David Brownell Cc: Mark Lord Acked-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/interface.c b/drivers/rtc/interface.c index 7e3ad4f..58b7336 100644 --- a/drivers/rtc/interface.c +++ b/drivers/rtc/interface.c @@ -126,12 +126,25 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) int err; struct rtc_time before, now; int first_time = 1; + unsigned long t_now, t_alm; + enum { none, day, month, year } missing = none; + unsigned days; - /* The lower level RTC driver may not be capable of filling - * in all fields of the rtc_time struct (eg. rtc-cmos), - * and so might instead return -1 in some fields. - * We deal with that here by grabbing a current RTC timestamp - * and using values from that for any missing (-1) values. + /* The lower level RTC driver may return -1 in some fields, + * creating invalid alarm->time values, for reasons like: + * + * - The hardware may not be capable of filling them in; + * many alarms match only on time-of-day fields, not + * day/month/year calendar data. + * + * - Some hardware uses illegal values as "wildcard" match + * values, which non-Linux firmware (like a BIOS) may try + * to set up as e.g. "alarm 15 minutes after each hour". + * Linux uses only oneshot alarms. + * + * When we see that here, we deal with it by using values from + * a current RTC timestamp for any missing (-1) values. The + * RTC driver prevents "periodic alarm" modes. * * But this can be racey, because some fields of the RTC timestamp * may have wrapped in the interval since we read the RTC alarm, @@ -174,6 +187,10 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) if (!alarm->enabled) return 0; + /* full-function RTCs won't have such missing fields */ + if (rtc_valid_tm(&alarm->time) == 0) + return 0; + /* get the "after" timestamp, to detect wrapped fields */ err = rtc_read_time(rtc, &now); if (err < 0) @@ -183,22 +200,85 @@ int rtc_read_alarm(struct rtc_device *rtc, struct rtc_wkalrm *alarm) } while ( before.tm_min != now.tm_min || before.tm_hour != now.tm_hour || before.tm_mon != now.tm_mon - || before.tm_year != now.tm_year - || before.tm_isdst != now.tm_isdst); + || before.tm_year != now.tm_year); - /* Fill in any missing alarm fields using the timestamp */ + /* Fill in the missing alarm fields using the timestamp; we + * know there's at least one since alarm->time is invalid. + */ if (alarm->time.tm_sec == -1) alarm->time.tm_sec = now.tm_sec; if (alarm->time.tm_min == -1) alarm->time.tm_min = now.tm_min; if (alarm->time.tm_hour == -1) alarm->time.tm_hour = now.tm_hour; - if (alarm->time.tm_mday == -1) + + /* For simplicity, only support date rollover for now */ + if (alarm->time.tm_mday == -1) { alarm->time.tm_mday = now.tm_mday; - if (alarm->time.tm_mon == -1) + missing = day; + } + if (alarm->time.tm_mon == -1) { alarm->time.tm_mon = now.tm_mon; - if (alarm->time.tm_year == -1) + if (missing == none) + missing = month; + } + if (alarm->time.tm_year == -1) { alarm->time.tm_year = now.tm_year; + if (missing == none) + missing = year; + } + + /* with luck, no rollover is needed */ + rtc_tm_to_time(&now, &t_now); + rtc_tm_to_time(&alarm->time, &t_alm); + if (t_now < t_alm) + goto done; + + switch (missing) { + + /* 24 hour rollover ... if it's now 10am Monday, an alarm that + * that will trigger at 5am will do so at 5am Tuesday, which + * could also be in the next month or year. This is a common + * case, especially for PCs. + */ + case day: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "day"); + t_alm += 24 * 60 * 60; + rtc_time_to_tm(t_alm, &alarm->time); + break; + + /* Month rollover ... if it's the 31th, an alarm on the 3rd will + * be next month. An alarm matching on the 30th, 29th, or 28th + * may end up in the month after that! Many newer PCs support + * this type of alarm. + */ + case month: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "month"); + do { + if (alarm->time.tm_mon < 11) + alarm->time.tm_mon++; + else { + alarm->time.tm_mon = 0; + alarm->time.tm_year++; + } + days = rtc_month_days(alarm->time.tm_mon, + alarm->time.tm_year); + } while (days < alarm->time.tm_mday); + break; + + /* Year rollover ... easy except for leap years! */ + case year: + dev_dbg(&rtc->dev, "alarm rollover: %s\n", "year"); + do { + alarm->time.tm_year++; + } while (!rtc_valid_tm(&alarm->time)); + break; + + default: + dev_warn(&rtc->dev, "alarm rollover not handled\n"); + } + +done: return 0; } EXPORT_SYMBOL_GPL(rtc_read_alarm); -- cgit v0.10.2 From 69d44a1835ec8163a82c4ee57367f87ae0f85c2e Mon Sep 17 00:00:00 2001 From: James Bottomley Date: Fri, 4 Jul 2008 09:59:27 -0700 Subject: firmware: fix the request_firmware() dummy > the build (.config attached) failed, make ends with : > ... > UPD include/linux/compile.h > CC init/version.o > LD init/built-in.o > LD vmlinux > drivers/built-in.o: In function `sas_request_addr': > (.text+0x33bab): undefined reference to `request_firmware' > drivers/built-in.o: In function `sas_request_addr': > (.text+0x33c3f): undefined reference to `release_firmware' > make: *** [vmlinux] Error 1 There's a slight fault in the stub logic. It fails for FW_LOADER=m and the user =y. This should fix it. This patch fixes the following 2.6.26-rc regression: http://bugzilla.kernel.org/show_bug.cgi?id=10730 Reviewed-by: Toralf Foerster Signed-off-by: Adrian Bunk Cc: "Rafael J. Wysocki" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/firmware.h b/include/linux/firmware.h index 4d10c73..6c7eff2 100644 --- a/include/linux/firmware.h +++ b/include/linux/firmware.h @@ -13,7 +13,7 @@ struct firmware { struct device; -#if defined(CONFIG_FW_LOADER) || defined(CONFIG_FW_LOADER_MODULE) +#if defined(CONFIG_FW_LOADER) || (defined(CONFIG_FW_LOADER_MODULE) && defined(MODULE)) int request_firmware(const struct firmware **fw, const char *name, struct device *device); int request_firmware_nowait( -- cgit v0.10.2 From 7ca796f492a11f9408e661c8f22cd8c4f486b8e5 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 4 Jul 2008 09:59:28 -0700 Subject: serial: fix serial_match_port() for dynamic major tty-device numbers As reported by Vipul Gandhi, the current serial_match_port() doesn't work for tty-devices using dynamic major number allocation. Fix it. It oopses if you suspend a serial port with _dynamic_ major number. ATM, I think, there's only the drivers/serial/jsm/jsm_driver.c driver, that does it in-tree. Signed-off-by: Guennadi Liakhovetski Tested-by: Vipul Gandhi Cc: Alan Cox Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c index c9b64e7..42d2e10 100644 --- a/drivers/serial/serial_core.c +++ b/drivers/serial/serial_core.c @@ -1991,7 +1991,9 @@ struct uart_match { static int serial_match_port(struct device *dev, void *data) { struct uart_match *match = data; - dev_t devt = MKDEV(match->driver->major, match->driver->minor) + match->port->line; + struct tty_driver *tty_drv = match->driver->tty_driver; + dev_t devt = MKDEV(tty_drv->major, tty_drv->minor_start) + + match->port->line; return dev->devt == devt; /* Actually, only one tty per port */ } -- cgit v0.10.2 From 7a36a752d006f6874049da510297eeb7f09d92a7 Mon Sep 17 00:00:00 2001 From: Oleg Nesterov Date: Fri, 4 Jul 2008 09:59:28 -0700 Subject: get_user_pages(): fix possible page leak on oom get_user_pages() must not return the error when i != 0. When pages != NULL we have i get_page()'ed pages. Signed-off-by: Oleg Nesterov Acked-by: Nick Piggin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory.c b/mm/memory.c index 350e646..2302d22 100644 --- a/mm/memory.c +++ b/mm/memory.c @@ -1151,7 +1151,7 @@ int get_user_pages(struct task_struct *tsk, struct mm_struct *mm, * be processed until returning to user space. */ if (unlikely(test_tsk_thread_flag(tsk, TIF_MEMDIE))) - return -ENOMEM; + return i ? i : -ENOMEM; if (write) foll_flags |= FOLL_WRITE; -- cgit v0.10.2 From 471d47e3223311d2638755717f97dc9a298f6dc9 Mon Sep 17 00:00:00 2001 From: Michael Hamel Date: Fri, 4 Jul 2008 09:59:30 -0700 Subject: rtc-x1205: Fix alarm set I have discovered that the current version of rtc-x1205.c does not work correctly when asked to set the alarm time by the RTC_WKALM_SET ioctl() call. This happens because the alarm registers do not behave like the current-time registers. They are non-volatile. Two things go wrong: - the X1205 requires a 10 msec delay after any attempt to write to the non-volatile registers. The x1205_set_datetime() routine does the write as 8 single-byte writes without any delay. Only the first write succeeds. The second is NAKed because the chip is busy. - the X1205 resets the RWEL bit after any write to the non-volatile registers. This would lock out any further writes after the first even with a 10msec delay. I fix this by doing a single 8-byte write and then waiting 10msec for the chip to be ready. A side effect of this change is that it will speed up x1205_rtc_set_time() which uses the same code. I have also implemented the 'enable' bit in the rtc_wkalm structure, which the existing driver does not attempt to do. I have modified both x1205_rtc_set_alarm() to set the AL0E bit, and x1205_rtc_read_alarm() to return it. I have tested this patch on a LinkSys NSLU2 under OpenWRT, but on no other hardware. On the NSLU2 the X1205 correctly asserts its IRQ pin when the alarm time matches the current time. [akpm@linux-foundation.org: clean up over-parenthesisation] Signed-off-by: Michael Hamel Signed-off-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-x1205.c b/drivers/rtc/rtc-x1205.c index eaf5594..7dcfba1 100644 --- a/drivers/rtc/rtc-x1205.c +++ b/drivers/rtc/rtc-x1205.c @@ -71,6 +71,7 @@ #define X1205_SR_RTCF 0x01 /* Clock failure */ #define X1205_SR_WEL 0x02 /* Write Enable Latch */ #define X1205_SR_RWEL 0x04 /* Register Write Enable */ +#define X1205_SR_AL0 0x20 /* Alarm 0 match */ #define X1205_DTR_DTR0 0x01 #define X1205_DTR_DTR1 0x02 @@ -78,6 +79,8 @@ #define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */ +#define X1205_INT_AL0E 0x20 /* Alarm 0 enable */ + static struct i2c_driver x1205_driver; /* @@ -89,8 +92,8 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, unsigned char reg_base) { unsigned char dt_addr[2] = { 0, reg_base }; - unsigned char buf[8]; + int i; struct i2c_msg msgs[] = { { client->addr, 0, 2, dt_addr }, /* setup read ptr */ @@ -98,7 +101,7 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, }; /* read date registers */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -110,6 +113,11 @@ static int x1205_get_datetime(struct i2c_client *client, struct rtc_time *tm, buf[0], buf[1], buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]); + /* Mask out the enable bits if these are alarm registers */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] &= 0x7F; + tm->tm_sec = BCD2BIN(buf[CCR_SEC]); tm->tm_min = BCD2BIN(buf[CCR_MIN]); tm->tm_hour = BCD2BIN(buf[CCR_HOUR] & 0x3F); /* hr is 0-23 */ @@ -138,7 +146,7 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) }; /* read status register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -147,10 +155,11 @@ static int x1205_get_status(struct i2c_client *client, unsigned char *sr) } static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, - int datetoo, u8 reg_base) + int datetoo, u8 reg_base, unsigned char alm_enable) { - int i, xfer; + int i, xfer, nbytes; unsigned char buf[8]; + unsigned char rdata[10] = { 0, reg_base }; static const unsigned char wel[3] = { 0, X1205_REG_SR, X1205_SR_WEL }; @@ -189,6 +198,11 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, buf[CCR_Y2K] = BIN2BCD(tm->tm_year / 100); } + /* If writing alarm registers, set compare bits on registers 0-4 */ + if (reg_base < X1205_CCR_BASE) + for (i = 0; i <= 4; i++) + buf[i] |= 0x80; + /* this sequence is required to unlock the chip */ if ((xfer = i2c_master_send(client, wel, 3)) != 3) { dev_err(&client->dev, "%s: wel - %d\n", __func__, xfer); @@ -200,19 +214,57 @@ static int x1205_set_datetime(struct i2c_client *client, struct rtc_time *tm, return -EIO; } + /* write register's data */ - for (i = 0; i < (datetoo ? 8 : 3); i++) { - unsigned char rdata[3] = { 0, reg_base + i, buf[i] }; + if (datetoo) + nbytes = 8; + else + nbytes = 3; + for (i = 0; i < nbytes; i++) + rdata[2+i] = buf[i]; + + xfer = i2c_master_send(client, rdata, nbytes+2); + if (xfer != nbytes+2) { + dev_err(&client->dev, + "%s: result=%d addr=%02x, data=%02x\n", + __func__, + xfer, rdata[1], rdata[2]); + return -EIO; + } + + /* If we wrote to the nonvolatile region, wait 10msec for write cycle*/ + if (reg_base < X1205_CCR_BASE) { + unsigned char al0e[3] = { 0, X1205_REG_INT, 0 }; + + msleep(10); - xfer = i2c_master_send(client, rdata, 3); + /* ...and set or clear the AL0E bit in the INT register */ + + /* Need to set RWEL again as the write has cleared it */ + xfer = i2c_master_send(client, rwel, 3); if (xfer != 3) { dev_err(&client->dev, - "%s: xfer=%d addr=%02x, data=%02x\n", + "%s: aloe rwel - %d\n", __func__, - xfer, rdata[1], rdata[2]); + xfer); + return -EIO; + } + + if (alm_enable) + al0e[2] = X1205_INT_AL0E; + + xfer = i2c_master_send(client, al0e, 3); + if (xfer != 3) { + dev_err(&client->dev, + "%s: al0e - %d\n", + __func__, + xfer); return -EIO; } - }; + + /* and wait 10msec again for this write to complete */ + msleep(10); + } /* disable further writes */ if ((xfer = i2c_master_send(client, diswe, 3)) != 3) { @@ -230,9 +282,9 @@ static int x1205_fix_osc(struct i2c_client *client) tm.tm_hour = tm.tm_min = tm.tm_sec = 0; - if ((err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE)) < 0) - dev_err(&client->dev, - "unable to restart the oscillator\n"); + err = x1205_set_datetime(client, &tm, 0, X1205_CCR_BASE, 0); + if (err < 0) + dev_err(&client->dev, "unable to restart the oscillator\n"); return err; } @@ -248,7 +300,7 @@ static int x1205_get_dtrim(struct i2c_client *client, int *trim) }; /* read dtr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -280,7 +332,7 @@ static int x1205_get_atrim(struct i2c_client *client, int *trim) }; /* read atr register */ - if ((i2c_transfer(client->adapter, &msgs[0], 2)) != 2) { + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { dev_err(&client->dev, "%s: read error\n", __func__); return -EIO; } @@ -403,14 +455,33 @@ static int x1205_validate_client(struct i2c_client *client) static int x1205_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm) { - return x1205_get_datetime(to_i2c_client(dev), - &alrm->time, X1205_ALM0_BASE); + int err; + unsigned char intreg, status; + static unsigned char int_addr[2] = { 0, X1205_REG_INT }; + struct i2c_client *client = to_i2c_client(dev); + struct i2c_msg msgs[] = { + { client->addr, 0, 2, int_addr }, /* setup read ptr */ + { client->addr, I2C_M_RD, 1, &intreg }, /* read INT register */ + }; + + /* read interrupt register and status register */ + if (i2c_transfer(client->adapter, &msgs[0], 2) != 2) { + dev_err(&client->dev, "%s: read error\n", __func__); + return -EIO; + } + err = x1205_get_status(client, &status); + if (err == 0) { + alrm->pending = (status & X1205_SR_AL0) ? 1 : 0; + alrm->enabled = (intreg & X1205_INT_AL0E) ? 1 : 0; + err = x1205_get_datetime(client, &alrm->time, X1205_ALM0_BASE); + } + return err; } static int x1205_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm) { return x1205_set_datetime(to_i2c_client(dev), - &alrm->time, 1, X1205_ALM0_BASE); + &alrm->time, 1, X1205_ALM0_BASE, alrm->enabled); } static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) @@ -422,7 +493,7 @@ static int x1205_rtc_read_time(struct device *dev, struct rtc_time *tm) static int x1205_rtc_set_time(struct device *dev, struct rtc_time *tm) { return x1205_set_datetime(to_i2c_client(dev), - tm, 1, X1205_CCR_BASE); + tm, 1, X1205_CCR_BASE, 0); } static int x1205_rtc_proc(struct device *dev, struct seq_file *seq) -- cgit v0.10.2 From cce3ce89c1abde1298dd0e769ab9c14ea95d7384 Mon Sep 17 00:00:00 2001 From: Huacai Chen Date: Fri, 4 Jul 2008 09:59:31 -0700 Subject: rtc: fix CMOS time error after writing /proc/acpi/alarm When writing /proc/acpi/alarm in adjust mode, e.g. echo "+0000-00-00 00:00:15" >/proc/acpi/alarm The "century" field should be read and added to "year" field before writing, otherwise the CMOS time will go back to 2000 years ago, e.g. # cat /proc/acpi/alarm 0008-06-21 11:38:46 Then the system time may be reset to the date of manufacture after rebooting. This patch fixed this issue. Signed-off-by: Huacai Chen Acked-by: Pavel Machek Acked-by: Zhao Yakui Acked-by: Alessandro Zummo Acked-by: Len Brown Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/acpi/sleep/proc.c b/drivers/acpi/sleep/proc.c index 224c57c..4ebbba2 100644 --- a/drivers/acpi/sleep/proc.c +++ b/drivers/acpi/sleep/proc.c @@ -315,8 +315,11 @@ acpi_system_write_alarm(struct file *file, cmos_bcd_write(day, acpi_gbl_FADT.day_alarm, rtc_control); if (acpi_gbl_FADT.month_alarm) cmos_bcd_write(mo, acpi_gbl_FADT.month_alarm, rtc_control); - if (acpi_gbl_FADT.century) + if (acpi_gbl_FADT.century) { + if (adjust) + yr += cmos_bcd_read(acpi_gbl_FADT.century, rtc_control) * 100; cmos_bcd_write(yr / 100, acpi_gbl_FADT.century, rtc_control); + } /* enable the rtc alarm interrupt */ rtc_control |= RTC_AIE; CMOS_WRITE(rtc_control, RTC_CONTROL); -- cgit v0.10.2 From 66d715c95a39e84cd25204a665915621457d9691 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 4 Jul 2008 09:59:32 -0700 Subject: pci: VT3336 can't do MSI either It seems VT3336 can't do msi either as with its bro 3351. Disable it. Reported in the following SUSE bug. https://bugzilla.novell.com/show_bug.cgi?id=300001 Signed-off-by: Tejun Heo Acked-by: Jesse Barnes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index a3497dc..338a3f9 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1727,6 +1727,7 @@ static void __init quirk_disable_all_msi(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_GCNB_LE, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS400_200, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_RS480, quirk_disable_all_msi); +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3336, quirk_disable_all_msi); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_VIA, PCI_DEVICE_ID_VIA_VT3351, quirk_disable_all_msi); /* Disable MSI on chipsets that are known to not support it */ -- cgit v0.10.2 From 450c622e9ff19888818d4e2c4d31adb97a5242b2 Mon Sep 17 00:00:00 2001 From: Miguel Ojeda Date: Fri, 4 Jul 2008 09:59:33 -0700 Subject: Miguel Ojeda has moved Signed-off-by: Miguel Ojeda Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/CREDITS b/CREDITS index 8fec7b3..e97bea0 100644 --- a/CREDITS +++ b/CREDITS @@ -2611,8 +2611,9 @@ S: Perth, Western Australia S: Australia N: Miguel Ojeda Sandonis -E: maxextreme@gmail.com -W: http://maxextreme.googlepages.com/ +E: miguel.ojeda.sandonis@gmail.com +W: http://miguelojeda.es +W: http://jair.lab.fi.uva.es/~migojed/ D: Author of the ks0108, cfag12864b and cfag12864bfb auxiliary display drivers. D: Maintainer of the auxiliary display drivers tree (drivers/auxdisplay/*) S: C/ Mieses 20, 9-B diff --git a/Documentation/auxdisplay/cfag12864b b/Documentation/auxdisplay/cfag12864b index b714183..eb7be39 100644 --- a/Documentation/auxdisplay/cfag12864b +++ b/Documentation/auxdisplay/cfag12864b @@ -3,7 +3,7 @@ =================================== License: GPLv2 -Author & Maintainer: Miguel Ojeda Sandonis +Author & Maintainer: Miguel Ojeda Sandonis Date: 2006-10-27 @@ -22,7 +22,7 @@ Date: 2006-10-27 1. DRIVER INFORMATION --------------------- -This driver support one cfag12864b display at time. +This driver supports a cfag12864b LCD. --------------------- diff --git a/Documentation/auxdisplay/cfag12864b-example.c b/Documentation/auxdisplay/cfag12864b-example.c index 7bfac35..2caeea5 100644 --- a/Documentation/auxdisplay/cfag12864b-example.c +++ b/Documentation/auxdisplay/cfag12864b-example.c @@ -4,7 +4,7 @@ * Description: cfag12864b LCD userspace example program * License: GPLv2 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify diff --git a/Documentation/auxdisplay/ks0108 b/Documentation/auxdisplay/ks0108 index 92b03b6..8ddda0c 100644 --- a/Documentation/auxdisplay/ks0108 +++ b/Documentation/auxdisplay/ks0108 @@ -3,7 +3,7 @@ ========================================== License: GPLv2 -Author & Maintainer: Miguel Ojeda Sandonis +Author & Maintainer: Miguel Ojeda Sandonis Date: 2006-10-27 @@ -21,7 +21,7 @@ Date: 2006-10-27 1. DRIVER INFORMATION --------------------- -This driver support the ks0108 LCD controller. +This driver supports the ks0108 LCD controller. --------------------- diff --git a/MAINTAINERS b/MAINTAINERS index 13b7b19..ba7ac13 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -763,9 +763,10 @@ S: Maintained AUXILIARY DISPLAY DRIVERS P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained AVR32 ARCHITECTURE @@ -1055,16 +1056,18 @@ S: Supported CFAG12864B LCD DRIVER P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained CFAG12864BFB LCD FRAMEBUFFER DRIVER P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained CFG80211 and NL80211 @@ -2428,9 +2431,10 @@ S: Maintained KS0108 LCD CONTROLLER DRIVER P: Miguel Ojeda Sandonis -M: maxextreme@gmail.com +M: miguel.ojeda.sandonis@gmail.com L: linux-kernel@vger.kernel.org -W: http://auxdisplay.googlepages.com/ +W: http://miguelojeda.es/auxdisplay.htm +W: http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm S: Maintained LAPB module diff --git a/drivers/auxdisplay/Kconfig b/drivers/auxdisplay/Kconfig index 043353b..14b9d5f 100644 --- a/drivers/auxdisplay/Kconfig +++ b/drivers/auxdisplay/Kconfig @@ -64,7 +64,7 @@ config KS0108_DELAY Amount of time the ks0108 should wait between each control write to the parallel port. - If your driver seems to miss random writings, increment this. + If your LCD seems to miss random writings, increment this. If you don't know what I'm talking about, ignore it. diff --git a/drivers/auxdisplay/cfag12864b.c b/drivers/auxdisplay/cfag12864b.c index 80bb061..683509f 100644 --- a/drivers/auxdisplay/cfag12864b.c +++ b/drivers/auxdisplay/cfag12864b.c @@ -5,7 +5,7 @@ * License: GPLv2 * Depends: ks0108 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify @@ -398,5 +398,5 @@ module_init(cfag12864b_init); module_exit(cfag12864b_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Miguel Ojeda Sandonis "); +MODULE_AUTHOR("Miguel Ojeda Sandonis "); MODULE_DESCRIPTION("cfag12864b LCD driver"); diff --git a/drivers/auxdisplay/cfag12864bfb.c b/drivers/auxdisplay/cfag12864bfb.c index 307c190..fe3a865 100644 --- a/drivers/auxdisplay/cfag12864bfb.c +++ b/drivers/auxdisplay/cfag12864bfb.c @@ -5,7 +5,7 @@ * License: GPLv2 * Depends: cfag12864b * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify @@ -186,5 +186,5 @@ module_init(cfag12864bfb_init); module_exit(cfag12864bfb_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Miguel Ojeda Sandonis "); +MODULE_AUTHOR("Miguel Ojeda Sandonis "); MODULE_DESCRIPTION("cfag12864b LCD framebuffer driver"); diff --git a/drivers/auxdisplay/ks0108.c b/drivers/auxdisplay/ks0108.c index e6c3646..5b93852 100644 --- a/drivers/auxdisplay/ks0108.c +++ b/drivers/auxdisplay/ks0108.c @@ -5,7 +5,7 @@ * License: GPLv2 * Depends: parport * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify @@ -173,6 +173,6 @@ module_init(ks0108_init); module_exit(ks0108_exit); MODULE_LICENSE("GPL v2"); -MODULE_AUTHOR("Miguel Ojeda Sandonis "); +MODULE_AUTHOR("Miguel Ojeda Sandonis "); MODULE_DESCRIPTION("ks0108 LCD Controller driver"); diff --git a/include/linux/cfag12864b.h b/include/linux/cfag12864b.h index 1605dd8..6f9f19d 100644 --- a/include/linux/cfag12864b.h +++ b/include/linux/cfag12864b.h @@ -4,7 +4,7 @@ * Description: cfag12864b LCD driver header * License: GPLv2 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-12 * * This program is free software; you can redistribute it and/or modify diff --git a/include/linux/ks0108.h b/include/linux/ks0108.h index a2c54ac..cb31179 100644 --- a/include/linux/ks0108.h +++ b/include/linux/ks0108.h @@ -4,7 +4,7 @@ * Description: ks0108 LCD Controller driver header * License: GPLv2 * - * Author: Copyright (C) Miguel Ojeda Sandonis + * Author: Copyright (C) Miguel Ojeda Sandonis * Date: 2006-10-31 * * This program is free software; you can redistribute it and/or modify -- cgit v0.10.2 From f5c8f7dae75e1e6bb3200fc61302e4d5e2df3dc2 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 4 Jul 2008 09:59:33 -0700 Subject: ext3: add missing unlock to error path in ext3_quota_write() When write in ext3_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ext3/super.c b/fs/ext3/super.c index fe3119a..2845425 100644 --- a/fs/ext3/super.c +++ b/fs/ext3/super.c @@ -2875,8 +2875,10 @@ static ssize_t ext3_quota_write(struct super_block *sb, int type, blk++; } out: - if (len == towrite) + if (len == towrite) { + mutex_unlock(&inode->i_mutex); return err; + } if (inode->i_size < off+len-towrite) { i_size_write(inode, off+len-towrite); EXT3_I(inode)->i_disksize = inode->i_size; -- cgit v0.10.2 From 4d04e4fbf8fc9f5136a64d45e2c20de095c08efb Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 4 Jul 2008 09:59:34 -0700 Subject: ext4: add missing unlock to an error path in ext4_quota_write() When write in ext4_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ext4/super.c b/fs/ext4/super.c index cb96f127c..02bf243 100644 --- a/fs/ext4/super.c +++ b/fs/ext4/super.c @@ -3337,8 +3337,10 @@ static ssize_t ext4_quota_write(struct super_block *sb, int type, blk++; } out: - if (len == towrite) + if (len == towrite) { + mutex_unlock(&inode->i_mutex); return err; + } if (inode->i_size < off+len-towrite) { i_size_write(inode, off+len-towrite); EXT4_I(inode)->i_disksize = inode->i_size; -- cgit v0.10.2 From 10dd08dc04c881dcc9f7f19e2a3ad8e0778e4db5 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 4 Jul 2008 09:59:34 -0700 Subject: reiserfs: add missing unlock to an error path in reiserfs_quota_write() When write in reiserfs_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by: Jan Kara Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c index ed424d7..1d40f2b 100644 --- a/fs/reiserfs/super.c +++ b/fs/reiserfs/super.c @@ -2165,8 +2165,10 @@ static ssize_t reiserfs_quota_write(struct super_block *sb, int type, blk++; } out: - if (len == towrite) + if (len == towrite) { + mutex_unlock(&inode->i_mutex); return err; + } if (inode->i_size < off + len - towrite) i_size_write(inode, off + len - towrite); inode->i_version++; -- cgit v0.10.2 From c4a2d7fbec3029c8891a3ad5fceec2992096a3b7 Mon Sep 17 00:00:00 2001 From: Michael Halcrow Date: Fri, 4 Jul 2008 09:59:35 -0700 Subject: ecryptfs: remove unnecessary mux from ecryptfs_init_ecryptfs_miscdev() The misc_mtx should provide all the protection required to keep the daemon hash table sane during miscdev registration. Since this mutex is causing gratuitous lockdep warnings, this patch removes it. Signed-off-by: Michael Halcrow Reported-by: Cyrill Gorcunov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/ecryptfs/miscdev.c b/fs/ecryptfs/miscdev.c index 50c994a..09a4522 100644 --- a/fs/ecryptfs/miscdev.c +++ b/fs/ecryptfs/miscdev.c @@ -575,13 +575,11 @@ int ecryptfs_init_ecryptfs_miscdev(void) int rc; atomic_set(&ecryptfs_num_miscdev_opens, 0); - mutex_lock(&ecryptfs_daemon_hash_mux); rc = misc_register(&ecryptfs_miscdev); if (rc) printk(KERN_ERR "%s: Failed to register miscellaneous device " "for communications with userspace daemons; rc = [%d]\n", __func__, rc); - mutex_unlock(&ecryptfs_daemon_hash_mux); return rc; } -- cgit v0.10.2 From da9eac8990dc614ab4756f2a3d84870b675f1f1e Mon Sep 17 00:00:00 2001 From: Paul Mundt Date: Fri, 4 Jul 2008 09:59:36 -0700 Subject: lib: taint kernel in common report_bug() WARN path. Commit 95b570c9cef3b12356454c7112571b7e406b4b51 ("Taint kernel after WARN_ON(condition)") introduced a TAINT_WARN that was implemented for all architectures using the generic warn_on_slowpath(), which excluded any architecture that set HAVE_ARCH_WARN_ON. As all of the architectures that implement their own WARN_ON() all go through the report_bug() path (specifically handling BUG_TRAP_TYPE_WARN), taint the kernel there as well for consistency. Tested on avr32 and sh. Also relevant for s390, parisc, and powerpc. Signed-off-by: Haavard Skinnemoen Signed-off-by: Paul Mundt Acked-by: Kyle McMartin Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/lib/bug.c b/lib/bug.c index 530f38f..bfeafd6 100644 --- a/lib/bug.c +++ b/lib/bug.c @@ -37,6 +37,7 @@ */ #include #include +#include #include #include @@ -149,6 +150,7 @@ enum bug_trap_type report_bug(unsigned long bugaddr, struct pt_regs *regs) (void *)bugaddr); show_regs(regs); + add_taint(TAINT_WARN); return BUG_TRAP_TYPE_WARN; } -- cgit v0.10.2 From 7059d4b08eba2ad046395a04b02e34ca27304d8f Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 4 Jul 2008 09:59:37 -0700 Subject: gpio: pca953x (i2c) handles max7310 too The pca953x driver can handle another 8-bit I/O expander, the max7310. This patch adds that chip to the list of supported IDs in that driver, and expands the Kconfig helptext accordingly. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index bbd2834..008c38b 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -28,12 +28,18 @@ config DEBUG_GPIO comment "I2C GPIO expanders:" config GPIO_PCA953X - tristate "PCA953x I/O ports" + tristate "PCA953x, PCA955x, and MAX7310 I/O ports" depends on I2C help - Say yes here to support the PCA9534 (8-bit), PCA9535 (16-bit), - PCA9536 (4-bit), PCA9537 (4-bit), PCA9538 (8-bit), and PCA9539 - (16-bit) I/O ports. These parts are made by NXP and TI. + Say yes here to provide access to several register-oriented + SMBus I/O expanders, made mostly by NXP or TI. Compatible + models include: + + 4 bits: pca9536, pca9537 + + 8 bits: max7310, pca9534, pca9538, pca9554, pca9557 + + 16 bits: pca9535, pca9539, pca9555 This driver can also be built as a module. If so, the module will be called pca953x. diff --git a/drivers/gpio/pca953x.c b/drivers/gpio/pca953x.c index 7e40e8a..a380730 100644 --- a/drivers/gpio/pca953x.c +++ b/drivers/gpio/pca953x.c @@ -33,7 +33,7 @@ static const struct i2c_device_id pca953x_id[] = { { "pca9554", 8, }, { "pca9555", 16, }, { "pca9557", 8, }, - /* REVISIT several pca955x parts should work here too */ + { "max7310", 8, }, { } }; MODULE_DEVICE_TABLE(i2c, pca953x_id); -- cgit v0.10.2 From 05946bce839b4fed5442dbfab77060fb75e051f3 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Fri, 4 Jul 2008 09:59:38 -0700 Subject: fsl_diu_fb: fix build with CONFIG_PM=y, plus fix some warnings This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by: Anton Vorontsov Cc: Timur Tabi Cc: Antonino Daplas Cc: York Sun Cc: Krzysztof Helt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index 0a27853..712dabc 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -286,7 +286,7 @@ static struct diu_pool pool; * rheap and make the furture large allocation fail. */ -void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys) +static void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys) { void *virt; @@ -311,12 +311,12 @@ void *fsl_diu_alloc(unsigned long size, phys_addr_t *phys) memset(virt, 0, size); } - pr_debug("rh virt=%p phys=%lx\n", virt, *phys); + pr_debug("rh virt=%p phys=%llx\n", virt, (unsigned long long)*phys); return virt; } -void fsl_diu_free(void *p, unsigned long size) +static void fsl_diu_free(void *p, unsigned long size) { pr_debug("p=%p size=%lu\n", p, size); @@ -770,7 +770,7 @@ static int map_video_memory(struct fb_info *info) info->fix.smem_len = info->fix.line_length * info->var.yres_virtual; pr_debug("MAP_VIDEO_MEMORY: smem_len = %d\n", info->fix.smem_len); info->screen_base = fsl_diu_alloc(info->fix.smem_len, &phys); - if (info->screen_base == 0) { + if (info->screen_base == NULL) { printk(KERN_ERR "Unable to allocate fb memory\n"); return -ENOMEM; } @@ -788,7 +788,7 @@ static int map_video_memory(struct fb_info *info) static void unmap_video_memory(struct fb_info *info) { fsl_diu_free(info->screen_base, info->fix.smem_len); - info->screen_base = 0; + info->screen_base = NULL; info->fix.smem_start = 0; info->fix.smem_len = 0; } @@ -1158,7 +1158,7 @@ static int init_fbinfo(struct fb_info *info) return 0; } -static int install_fb(struct fb_info *info) +static int __devinit install_fb(struct fb_info *info) { int rc; struct mfb_info *mfbi = info->par; @@ -1233,7 +1233,7 @@ static int install_fb(struct fb_info *info) return 0; } -static void __exit uninstall_fb(struct fb_info *info) +static void uninstall_fb(struct fb_info *info) { struct mfb_info *mfbi = info->par; @@ -1287,7 +1287,7 @@ static int request_irq_local(int irq) /* Read to clear the status */ status = in_be32(&hw->int_status); - ret = request_irq(irq, fsl_diu_isr, 0, "diu", 0); + ret = request_irq(irq, fsl_diu_isr, 0, "diu", NULL); if (ret) pr_info("Request diu IRQ failed.\n"); else { @@ -1312,7 +1312,7 @@ static void free_irq_local(int irq) /* Disable all LCDC interrupt */ out_be32(&hw->int_mask, 0x1f); - free_irq(irq, 0); + free_irq(irq, NULL); } #ifdef CONFIG_PM @@ -1324,7 +1324,7 @@ static int fsl_diu_suspend(struct of_device *ofdev, pm_message_t state) { struct fsl_diu_data *machine_data; - machine_data = dev_get_drvdata(&ofdev->dev); + machine_data = dev_get_drvdata(&dev->dev); disable_lcdc(machine_data->fsl_diu_info[0]); return 0; @@ -1334,7 +1334,7 @@ static int fsl_diu_resume(struct of_device *ofdev) { struct fsl_diu_data *machine_data; - machine_data = dev_get_drvdata(&ofdev->dev); + machine_data = dev_get_drvdata(&dev->dev); enable_lcdc(machine_data->fsl_diu_info[0]); return 0; @@ -1353,7 +1353,8 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) dma_addr_t paddr = 0; ssize = size + bytes_align; - buf->vaddr = dma_alloc_coherent(0, ssize, &paddr, GFP_DMA | __GFP_ZERO); + buf->vaddr = dma_alloc_coherent(NULL, ssize, &paddr, GFP_DMA | + __GFP_ZERO); if (!buf->vaddr) return -ENOMEM; @@ -1371,7 +1372,7 @@ static int allocate_buf(struct diu_addr *buf, u32 size, u32 bytes_align) static void free_buf(struct diu_addr *buf, u32 size, u32 bytes_align) { - dma_free_coherent(0, size + bytes_align, + dma_free_coherent(NULL, size + bytes_align, buf->vaddr, (buf->paddr - buf->offset)); return; } @@ -1411,7 +1412,7 @@ static ssize_t show_monitor(struct device *device, return diu_ops.show_monitor_port(machine_data->monitor_port, buf); } -static int fsl_diu_probe(struct of_device *ofdev, +static int __devinit fsl_diu_probe(struct of_device *ofdev, const struct of_device_id *match) { struct device_node *np = ofdev->node; -- cgit v0.10.2 From f93f18cd94626108021c4e681f48d2d99bca5b90 Mon Sep 17 00:00:00 2001 From: Hiroshi Shimamoto Date: Fri, 4 Jul 2008 09:59:39 -0700 Subject: Update taskstats-struct document for scaled time accounting Update Documentation/accounting/taskstats-struct.txt for TASKSTATS_VERSION 6, adding scaled time accounting. Signed-off-by: Hiroshi Shimamoto Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/accounting/taskstats-struct.txt b/Documentation/accounting/taskstats-struct.txt index 8aa7529..cd784f4 100644 --- a/Documentation/accounting/taskstats-struct.txt +++ b/Documentation/accounting/taskstats-struct.txt @@ -24,6 +24,8 @@ There are three different groups of fields in the struct taskstats: 4) Per-task and per-thread context switch count statistics +5) Time accounting for SMT machines + Future extension should add fields to the end of the taskstats struct, and should not change the relative position of each field within the struct. @@ -164,4 +166,8 @@ struct taskstats { __u64 nvcsw; /* Context voluntary switch counter */ __u64 nivcsw; /* Context involuntary switch counter */ +5) Time accounting for SMT machines + __u64 ac_utimescaled; /* utime scaled on frequency etc */ + __u64 ac_stimescaled; /* stime scaled on frequency etc */ + __u64 cpu_scaled_run_real_total; /* scaled cpu_run_real_total */ } -- cgit v0.10.2 From 77b96bd7e5ee0b44aed1b77fef5949bc19e8301f Mon Sep 17 00:00:00 2001 From: "Stephen M. Cameron" Date: Fri, 4 Jul 2008 09:59:40 -0700 Subject: cciss: fix regression that no device nodes are created if no logical drives are configured. Fix regression in cciss driver that if no logical drives are configured, no device nodes at all get created. Signed-off-by: Stephen M. Cameron Acked-by: Mike Miller Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index 5f1e1cc..f552105 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -3546,6 +3546,10 @@ static int __devinit cciss_init_one(struct pci_dev *pdev, for (j = 0; j <= hba[i]->highest_lun; j++) add_disk(hba[i]->gendisk[j]); + /* we must register the controller even if no disks exist */ + if (hba[i]->highest_lun == -1) + add_disk(hba[i]->gendisk[0]); + return 1; clean4: -- cgit v0.10.2 From abc5f23a32919f3196d3fa22d5216ab192db236b Mon Sep 17 00:00:00 2001 From: Balbir Singh Date: Fri, 4 Jul 2008 09:59:42 -0700 Subject: delay accounting: maintainer update Update the delay accounting and taskstats maintainer to Balbir Singh. I spoke to Shailabh and he is now busy with other things. Cc: Shailabh Nagar Cc: Shailabh Nagar Signed-off-by: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index ba7ac13..64197ef 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3183,8 +3183,8 @@ L: netdev@vger.kernel.org S: Maintained PER-TASK DELAY ACCOUNTING -P: Shailabh Nagar -M: nagar@watson.ibm.com +P: Balbir Singh +M: balbir@linux.vnet.ibm.com L: linux-kernel@vger.kernel.org S: Maintained @@ -3886,8 +3886,8 @@ M: hch@infradead.org S: Maintained TASKSTATS STATISTICS INTERFACE -P: Shailabh Nagar -M: nagar@watson.ibm.com +P: Balbir Singh +M: balbir@linux.vnet.ibm.com L: linux-kernel@vger.kernel.org S: Maintained -- cgit v0.10.2 From 71f77055deeab9708c00717352bec05aa125c713 Mon Sep 17 00:00:00 2001 From: Pavel Machek Date: Fri, 4 Jul 2008 09:59:43 -0700 Subject: Doc*/kernel-parameters.txt: fix stale references Fix stale references to source files in kernel-parameters.txt. Signed-off-by: Pavel Machek Acked-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index e07c432..85c6f57 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -295,7 +295,7 @@ and is between 256 and 4096 characters. It is defined in the file when initialising the APIC and IO-APIC components. apm= [APM] Advanced Power Management - See header of arch/i386/kernel/apm.c. + See header of arch/x86/kernel/apm_32.c. arcrimi= [HW,NET] ARCnet - "RIM I" (entirely mem-mapped) cards Format: ,, @@ -638,7 +638,7 @@ and is between 256 and 4096 characters. It is defined in the file elanfreq= [X86-32] See comment before function elanfreq_setup() in - arch/i386/kernel/cpu/cpufreq/elanfreq.c. + arch/x86/kernel/cpu/cpufreq/elanfreq.c. elevator= [IOSCHED] Format: {"anticipatory" | "cfq" | "deadline" | "noop"} -- cgit v0.10.2 From 292d73551d0aa19526c3417e791c529b49ebadf3 Mon Sep 17 00:00:00 2001 From: maximilian attems Date: Fri, 4 Jul 2008 09:59:43 -0700 Subject: hdaps: add support for various newer Lenovo thinkpads Adds R61, T61p, X61s, X61, Z61m, Z61p models to whitelist. Fixes this: cullen@lenny:~$ sudo modprobe hdaps FATAL: Error inserting hdaps (/lib/modules/2.6.22-10-generic/kernel/drivers/hwmon/hdaps.ko): No such device [25192.888000] hdaps: supported laptop not found! [25192.888000] hdaps: driver init failed (ret=-19)! Originally based on an Ubuntu patch that got it wrong, the dmidecode output of the corresponding laptops shows LENOVO as the manufacturer. https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/133636 tested on X61s: [ 184.893588] hdaps: inverting axis readings. [ 184.893588] hdaps: LENOVO ThinkPad X61s detected. [ 184.893588] input: hdaps as /class/input/input12 [ 184.924326] hdaps: driver successfully loaded. Cc: Klaus S. Madsen Cc: Chuck Short Cc: Jean Delvare Cc: Tim Gardner Signed-off-by: maximilian attems Cc: Mark M. Hoffman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/hwmon/hdaps.c b/drivers/hwmon/hdaps.c index 26df06f..50f2269 100644 --- a/drivers/hwmon/hdaps.c +++ b/drivers/hwmon/hdaps.c @@ -516,17 +516,23 @@ static struct dmi_system_id __initdata hdaps_whitelist[] = { HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R51"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad R52"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61i"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad R61"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T41p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T41"), HDAPS_DMI_MATCH_INVERT("IBM", "ThinkPad T42p"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T42"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad T43"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61p"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad T61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X40"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad X41"), HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X60"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61s"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad X61"), HDAPS_DMI_MATCH_NORMAL("IBM", "ThinkPad Z60m"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61m"), + HDAPS_DMI_MATCH_INVERT("LENOVO", "ThinkPad Z61p"), { .ident = NULL } }; -- cgit v0.10.2 From 7fc7228c0be9007f0e6a32c8a8ae340ea6246056 Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 4 Jul 2008 09:59:46 -0700 Subject: mn10300: export certain arch symbols required to build allmodconfig Export kernel_thread() and empty_zero_page so that allmodconfig can be built for MN10300. Signed-off-by: David Howells Cc: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c index 6d19628..544ee1a 100644 --- a/arch/mn10300/kernel/mn10300_ksyms.c +++ b/arch/mn10300/kernel/mn10300_ksyms.c @@ -10,8 +10,11 @@ */ #include #include +#include +EXPORT_SYMBOL(empty_zero_page); + EXPORT_SYMBOL(change_bit); EXPORT_SYMBOL(test_and_change_bit); diff --git a/arch/mn10300/kernel/process.c b/arch/mn10300/kernel/process.c index 9c623c8..b28c9a6 100644 --- a/arch/mn10300/kernel/process.c +++ b/arch/mn10300/kernel/process.c @@ -153,6 +153,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags) return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0, ®s, 0, NULL, NULL); } +EXPORT_SYMBOL(kernel_thread); /* * free current thread data structures etc.. -- cgit v0.10.2 From fc26361ef0fbcad0406475fc6006fa4f09e60dce Mon Sep 17 00:00:00 2001 From: David Howells Date: Fri, 4 Jul 2008 09:59:47 -0700 Subject: mn10300: provide __ucmpdi2() for MN10300 Provide __ucmpdi2() for MN10300 so that allmodconfig can be built. Signed-off-by: David Howells Cc: Adrian Bunk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/mn10300/kernel/mn10300_ksyms.c b/arch/mn10300/kernel/mn10300_ksyms.c index 544ee1a..f9eb975 100644 --- a/arch/mn10300/kernel/mn10300_ksyms.c +++ b/arch/mn10300/kernel/mn10300_ksyms.c @@ -34,7 +34,9 @@ extern u64 __ashrdi3(u64, unsigned); extern u64 __ashldi3(u64, unsigned); extern u64 __lshrdi3(u64, unsigned); extern s64 __negdi2(s64); +extern int __ucmpdi2(u64, u64); EXPORT_SYMBOL(__ashrdi3); EXPORT_SYMBOL(__ashldi3); EXPORT_SYMBOL(__lshrdi3); EXPORT_SYMBOL(__negdi2); +EXPORT_SYMBOL(__ucmpdi2); diff --git a/arch/mn10300/lib/Makefile b/arch/mn10300/lib/Makefile index fdfa9ec..0cd2346 100644 --- a/arch/mn10300/lib/Makefile +++ b/arch/mn10300/lib/Makefile @@ -4,4 +4,4 @@ lib-y = delay.o usercopy.o checksum.o bitops.o memcpy.o memmove.o memset.o lib-y += do_csum.o -lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o +lib-y += __ashldi3.o __ashrdi3.o __lshrdi3.o negdi2.o __ucmpdi2.o diff --git a/arch/mn10300/lib/__ucmpdi2.S b/arch/mn10300/lib/__ucmpdi2.S new file mode 100644 index 0000000..60dcbdf --- /dev/null +++ b/arch/mn10300/lib/__ucmpdi2.S @@ -0,0 +1,43 @@ +/* __ucmpdi2.S: 64-bit unsigned compare + * + * Copyright (C) 2008 Red Hat, Inc. All Rights Reserved. + * Written by David Howells (dhowells@redhat.com) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + + + .text + .p2align 4 + +############################################################################### +# +# int __ucmpdi2(unsigned long long a [D0:D1], +# unsigned long long b [(SP,12),(SP,16)]) +# +# - returns 0, 1, or 2 as a <, =, > b respectively. +# +############################################################################### + .globl __ucmpdi2 + .type __ucmpdi2,@function +__ucmpdi2: + mov (12,sp),a0 # b.lsw + mov (16,sp),a1 # b.msw + + sub a0,d0 + subc a1,d1 # may clear Z, never sets it + bne __ucmpdi2_differ # a.msw != b.msw + mov +1,d0 + rets + +__ucmpdi2_differ: + # C flag is set if LE, clear if GE + subc d0,d0 # -1 if LE, 0 if GE + add +1,d0 # 0 if LE, 1 if GE + add d0,d0 # 0 if LE, 2 if GE + rets + + .size __ucmpdi2, .-__ucmpdi2 -- cgit v0.10.2 From 93921f5c2ce7427cc30341c86882527d1d1d8770 Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 4 Jul 2008 09:59:48 -0700 Subject: Introduce rculist.h In linux-next there is a commit ("rcu: split list.h and move rcu-protected lists into rculist.h") that moved the rcu related list iterators from list.h to rculist.h. Add a trivial version of the file now so that various subsystem trees can start using it now for -next changes and so reduce the build errors caused by adding uses of the moved functions. Cc: Franck Bui-Huu Acked-by: Paul E. McKenney Cc: Josh Triplett Acked-by: Ingo Molnar Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/rculist.h b/include/linux/rculist.h new file mode 100644 index 0000000..bde4586 --- /dev/null +++ b/include/linux/rculist.h @@ -0,0 +1,6 @@ +#ifndef _LINUX_RCULIST_H +#define _LINUX_RCULIST_H + +#include + +#endif /* _LINUX_RCULIST_H */ -- cgit v0.10.2 From c76a58783d7bb2190872c5431e5ee44da7143fad Mon Sep 17 00:00:00 2001 From: Michael Kerrisk Date: Fri, 4 Jul 2008 09:59:49 -0700 Subject: man-pages is supported Starting last month, I reached a long-time goal: man-pages finally has a paid, full-time maintainer, thanks to a fellowship from the Linux Foundation. It's still a little unclear how long the LF money will last for the fellowship, but for the foreseeable future, I'll be working on: * Properly documenting every new Linux kernel-userland (and glibc) API, and every API change, that is released into the mainline kernel, ideally before actual release. (That's the ideal, but there's a quite a backlog, so I'm not going to achieve the ideal immediately.) * Testing new APIs, again ideally before they are released into the mainline kernel, and probably doing some light bug fixing while I'm at it (e.g., the recent utimensat() work). * Design review of new APIs, which of course can only usefully be done before they are released into the mainline kernel. * And of course accepting patches and dealing with bug reports for existing man pages. Signed-off-by: Michael Kerrisk Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 64197ef..049ff31 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2668,8 +2668,8 @@ S: Supported MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7 P: Michael Kerrisk M: mtk.manpages@gmail.com -W: ftp://ftp.kernel.org/pub/linux/docs/manpages -S: Maintained +W: http://www.kernel.org/doc/man-pages +S: Supported MARVELL LIBERTAS WIRELESS DRIVER P: Dan Williams -- cgit v0.10.2 From 337e2ab5d1efca56c6fdd57bffaea7e7899e7283 Mon Sep 17 00:00:00 2001 From: Jess Guerrero Date: Fri, 4 Jul 2008 09:59:50 -0700 Subject: ntfs: update help text The url in the help text for ntfs should be updated. Acked-by: Anton Altaparmakov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/Kconfig b/fs/Kconfig index cf12c40..2694648 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -830,7 +830,7 @@ config NTFS_FS from the project web site. For more information see - and . + and . To compile this file system support as a module, choose M here: the module will be called ntfs. -- cgit v0.10.2 From 6d1029b56329b1cc9b7233e5333c1a48ddbbfad8 Mon Sep 17 00:00:00 2001 From: Akinobu Mita Date: Fri, 4 Jul 2008 09:59:51 -0700 Subject: add kernel-doc for simple_read_from_buffer and memory_read_from_buffer Add kernel-doc comments describing simple_read_from_buffer and memory_read_from_buffer. Signed-off-by: Akinobu Mita Cc: Christoph Hellwig Cc: "Randy.Dunlap" Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/libfs.c b/fs/libfs.c index 892d41c..baeb71e 100644 --- a/fs/libfs.c +++ b/fs/libfs.c @@ -512,6 +512,20 @@ void simple_release_fs(struct vfsmount **mount, int *count) mntput(mnt); } +/** + * simple_read_from_buffer - copy data from the buffer to user space + * @to: the user space buffer to read to + * @count: the maximum number of bytes to read + * @ppos: the current position in the buffer + * @from: the buffer to read from + * @available: the size of the buffer + * + * The simple_read_from_buffer() function reads up to @count bytes from the + * buffer @from at offset @ppos into the user space address starting at @to. + * + * On success, the number of bytes read is returned and the offset @ppos is + * advanced by this number, or negative value is returned on error. + **/ ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, const void *from, size_t available) { @@ -528,6 +542,20 @@ ssize_t simple_read_from_buffer(void __user *to, size_t count, loff_t *ppos, return count; } +/** + * memory_read_from_buffer - copy data from the buffer + * @to: the kernel space buffer to read to + * @count: the maximum number of bytes to read + * @ppos: the current position in the buffer + * @from: the buffer to read from + * @available: the size of the buffer + * + * The memory_read_from_buffer() function reads up to @count bytes from the + * buffer @from at offset @ppos into the kernel space address starting at @to. + * + * On success, the number of bytes read is returned and the offset @ppos is + * advanced by this number, or negative value is returned on error. + **/ ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos, const void *from, size_t available) { -- cgit v0.10.2 From e5dd3cbd81aad69bdf773ab63c06fbaabc2b767a Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 4 Jul 2008 09:59:52 -0700 Subject: w100fb: do not depend on SHARPSL Apart from Sharp SL-Cxx series, there are a few other devices that have ATI Imageon chips, among them HP iPAQ hx4700. Signed-off-by: Philipp Zabel Acked-by: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 002b61b..e0c5f96 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -1825,12 +1825,13 @@ config FB_FSL_DIU config FB_W100 tristate "W100 frame buffer support" - depends on FB && PXA_SHARPSL + depends on FB && ARCH_PXA select FB_CFB_FILLRECT select FB_CFB_COPYAREA select FB_CFB_IMAGEBLIT ---help--- Frame buffer driver for the w100 as found on the Sharp SL-Cxx series. + It can also drive the w3220 chip found on iPAQ hx4700. This driver is also available as a module ( = code which can be inserted and removed from the running kernel whenever you want). The -- cgit v0.10.2 From 27c8d95f8c9ff83e4e4d8a90523d891427964c79 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Fri, 4 Jul 2008 09:59:53 -0700 Subject: w100fb: add 80 MHz modeline This is needed for HTC Blueangel (w3200). At 96MHz its screen flickers. Signed-off-by: Philipp Zabel Acked-by: Ian Molton Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/video/w100fb.c b/drivers/video/w100fb.c index 30469bf..d0674f1 100644 --- a/drivers/video/w100fb.c +++ b/drivers/video/w100fb.c @@ -1003,6 +1003,7 @@ static struct w100_pll_info xtal_14318000[] = { static struct w100_pll_info xtal_16000000[] = { /*freq M N_int N_fac tfgoal lock_time */ { 72, 1, 8, 0, 0xe0, 48}, /* tfgoal guessed */ + { 80, 1, 9, 0, 0xe0, 13}, /* tfgoal guessed */ { 95, 1, 10, 7, 0xe0, 38}, /* tfgoal guessed */ { 96, 1, 11, 0, 0xe0, 36}, /* tfgoal guessed */ { 0, 0, 0, 0, 0, 0}, -- cgit v0.10.2 From 4e0d13cbb71de2b1baf71ddd3c14f7ba8da810e5 Mon Sep 17 00:00:00 2001 From: Samuel Ortiz Date: Fri, 4 Jul 2008 09:59:53 -0700 Subject: MFD maintainer We probably need someone to look after the few drivers/mfd patches coming every now and then. As agreed with Andrew, I'm ok to do so and my employer is fine with me spending a few working hours on it, if needed. Ben, Philipp, feel free to add your names there too if you wish. Signed-off-by: Samuel Ortiz Cc: "pHilipp Zabel" Cc: Ian Molton Cc: Ben Dooks Cc: Dmitry Baryshkov Cc: Russell King Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 049ff31..f13f82f 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2802,6 +2802,12 @@ W: https://tango.0pointer.de/mailman/listinfo/s270-linux W: http://0pointer.de/lennart/tchibo.html S: Maintained +MULTIFUNCTION DEVICES (MFD) +P: Samuel Ortiz +M: sameo@openedhand.com +L: linux-kernel@vger.kernel.org +S: Supported + MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM P: Pierre Ossman M: drzeus-mmc@drzeus.cx -- cgit v0.10.2 From bef67c5a7d3a9c45e091e36625c09c0c811e2672 Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 4 Jul 2008 09:59:55 -0700 Subject: cgroups: document the effect of attaching PID 0 to a cgroup Document that a pid of zero(0) can be used to refer to the current task when attaching a task to a cgroup, as in the following usage: # echo 0 > /dev/cgroup/tasks This is consistent with existing cpuset behavior. Signed-off-by: Li Zefan Acked-by: Paul Jackson Acked-by: Dhaval Giani Cc: Paul Menage Cc: Balbir Singh Cc: Andrea Righi Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cgroups.txt b/Documentation/cgroups.txt index 824fc02..d9014aa 100644 --- a/Documentation/cgroups.txt +++ b/Documentation/cgroups.txt @@ -390,6 +390,10 @@ If you have several tasks to attach, you have to do it one after another: ... # /bin/echo PIDn > tasks +You can attach the current shell task by echoing 0: + +# echo 0 > tasks + 3. Kernel API ============= -- cgit v0.10.2 From 4b1295b0df28cffd40e6c6d7c4b88dec7af1eb76 Mon Sep 17 00:00:00 2001 From: Sebastian Siewior Date: Fri, 4 Jul 2008 09:59:56 -0700 Subject: spi: fix the read path in spidev This got broken by the recent "fix rmmod $spi_driver while spidev-user is active". I tested the rmmod & write path but didn't check the read path. I am sorry. The read logic changed and spidev_sync_read() + spidev_sync_write() do not return zero on success anymore but the number of bytes that has been transfered over the bus. This patch changes the logic and copy_to_user() gets called again. The write path returns the number of bytes which are written to the underlying device what may be less than the requested size. This patch makes the same change to the read path or else we request a read of 20 bytes, get 10, don't call copy to user and report to the user that we read 10 bytes. [akpm@linux-foundation.org: remove test of known-to-be-zero local] Signed-off-by: Sebastian Siewior Acked-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c index 799337f..f5b60c7 100644 --- a/drivers/spi/spidev.c +++ b/drivers/spi/spidev.c @@ -167,14 +167,14 @@ spidev_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) mutex_lock(&spidev->buf_lock); status = spidev_sync_read(spidev, count); - if (status == 0) { + if (status > 0) { unsigned long missing; - missing = copy_to_user(buf, spidev->buffer, count); - if (count && missing == count) + missing = copy_to_user(buf, spidev->buffer, status); + if (missing == status) status = -EFAULT; else - status = count - missing; + status = status - missing; } mutex_unlock(&spidev->buf_lock); @@ -200,8 +200,6 @@ spidev_write(struct file *filp, const char __user *buf, missing = copy_from_user(spidev->buffer, buf, count); if (missing == 0) { status = spidev_sync_write(spidev, count); - if (status == 0) - status = count; } else status = -EFAULT; mutex_unlock(&spidev->buf_lock); -- cgit v0.10.2 From abbaeff38c00cb7f6817ec1cef406b27081ebedd Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 4 Jul 2008 09:59:57 -0700 Subject: doc: doc maintainers Maintain the kernel's Documentation/ tree. This includes tree layout and contents, although not much in terms of new content production. That will usually have to be done by someone familiar with the software, at least in some rough form. Includes review and editorial assistance for people contributing changes to /Documentation. Also includes prodding people for content if something is in need of documentation. Signed-off-by: Randy Dunlap Acked-by: Michael Kerrisk Cc: Jonathan Corbet Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index f13f82f..8c4ad23 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1423,6 +1423,14 @@ M: kristen.c.accardi@intel.com L: linux-acpi@vger.kernel.org S: Supported +DOCUMENTATION (/Documentation directory) +P: Michael Kerrisk +M: mtk.manpages@gmail.com +P: Randy Dunlap +M: rdunlap@xenotime.net +L: linux-doc@vger.kernel.org +S: Maintained + DOUBLETALK DRIVER P: James R. Van Zandt M: jrv@vanzandt.mv.com -- cgit v0.10.2 From 086f7316f0d400806d76323beefae996bb3849b1 Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Fri, 4 Jul 2008 09:59:58 -0700 Subject: security: filesystem capabilities: fix fragile setuid fixup code This commit includes a bugfix for the fragile setuid fixup code in the case that filesystem capabilities are supported (in access()). The effect of this fix is gated on filesystem capability support because changing securebits is only supported when filesystem capabilities support is configured.) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Andrew G. Morgan Acked-by: Serge Hallyn Acked-by: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/open.c b/fs/open.c index a145008..a99ad09 100644 --- a/fs/open.c +++ b/fs/open.c @@ -16,6 +16,7 @@ #include #include #include +#include #include #include #include @@ -425,7 +426,7 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode) { struct nameidata nd; int old_fsuid, old_fsgid; - kernel_cap_t old_cap; + kernel_cap_t uninitialized_var(old_cap); /* !SECURE_NO_SETUID_FIXUP */ int res; if (mode & ~S_IRWXO) /* where's F_OK, X_OK, W_OK, R_OK? */ @@ -433,23 +434,27 @@ asmlinkage long sys_faccessat(int dfd, const char __user *filename, int mode) old_fsuid = current->fsuid; old_fsgid = current->fsgid; - old_cap = current->cap_effective; current->fsuid = current->uid; current->fsgid = current->gid; - /* - * Clear the capabilities if we switch to a non-root user - * - * FIXME: There is a race here against sys_capset. The - * capabilities can change yet we will restore the old - * value below. We should hold task_capabilities_lock, - * but we cannot because user_path_walk can sleep. - */ - if (current->uid) - cap_clear(current->cap_effective); - else - current->cap_effective = current->cap_permitted; + if (!issecure(SECURE_NO_SETUID_FIXUP)) { + /* + * Clear the capabilities if we switch to a non-root user + */ +#ifndef CONFIG_SECURITY_FILE_CAPABILITIES + /* + * FIXME: There is a race here against sys_capset. The + * capabilities can change yet we will restore the old + * value below. We should hold task_capabilities_lock, + * but we cannot because user_path_walk can sleep. + */ +#endif /* ndef CONFIG_SECURITY_FILE_CAPABILITIES */ + if (current->uid) + old_cap = cap_set_effective(__cap_empty_set); + else + old_cap = cap_set_effective(current->cap_permitted); + } res = __user_walk_fd(dfd, filename, LOOKUP_FOLLOW|LOOKUP_ACCESS, &nd); if (res) @@ -478,7 +483,9 @@ out_path_release: out: current->fsuid = old_fsuid; current->fsgid = old_fsgid; - current->cap_effective = old_cap; + + if (!issecure(SECURE_NO_SETUID_FIXUP)) + cap_set_effective(old_cap); return res; } diff --git a/include/linux/capability.h b/include/linux/capability.h index fa830f8..0267384 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -501,6 +501,8 @@ extern const kernel_cap_t __cap_empty_set; extern const kernel_cap_t __cap_full_set; extern const kernel_cap_t __cap_init_eff_set; +kernel_cap_t cap_set_effective(const kernel_cap_t pE_new); + int capable(int cap); int __capable(struct task_struct *t, int cap); diff --git a/include/linux/securebits.h b/include/linux/securebits.h index c1f19db..92f09bd 100644 --- a/include/linux/securebits.h +++ b/include/linux/securebits.h @@ -7,14 +7,15 @@ inheritance of root-permissions and suid-root executable under compatibility mode. We raise the effective and inheritable bitmasks *of the executable file* if the effective uid of the new process is - 0. If the real uid is 0, we raise the inheritable bitmask of the + 0. If the real uid is 0, we raise the effective (legacy) bit of the executable file. */ #define SECURE_NOROOT 0 #define SECURE_NOROOT_LOCKED 1 /* make bit-0 immutable */ -/* When set, setuid to/from uid 0 does not trigger capability-"fixes" - to be compatible with old programs relying on set*uid to loose - privileges. When unset, setuid doesn't change privileges. */ +/* When set, setuid to/from uid 0 does not trigger capability-"fixup". + When unset, to provide compatiblility with old programs relying on + set*uid to gain/lose privilege, transitions to/from uid 0 cause + capabilities to be gained/lost. */ #define SECURE_NO_SETUID_FIXUP 2 #define SECURE_NO_SETUID_FIXUP_LOCKED 3 /* make bit-2 immutable */ @@ -26,10 +27,10 @@ #define SECURE_KEEP_CAPS 4 #define SECURE_KEEP_CAPS_LOCKED 5 /* make bit-4 immutable */ -/* Each securesetting is implemented using two bits. One bit specify +/* Each securesetting is implemented using two bits. One bit specifies whether the setting is on or off. The other bit specify whether the - setting is fixed or not. A setting which is fixed cannot be changed - from user-level. */ + setting is locked or not. A setting which is locked cannot be + changed from user-level. */ #define issecure_mask(X) (1 << (X)) #define issecure(X) (issecure_mask(X) & current->securebits) diff --git a/kernel/capability.c b/kernel/capability.c index cfbe442..901e0fd 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -121,6 +121,27 @@ static int cap_validate_magic(cap_user_header_t header, unsigned *tocopy) * uninteresting and/or not to be changed. */ +/* + * Atomically modify the effective capabilities returning the original + * value. No permission check is performed here - it is assumed that the + * caller is permitted to set the desired effective capabilities. + */ +kernel_cap_t cap_set_effective(const kernel_cap_t pE_new) +{ + kernel_cap_t pE_old; + + spin_lock(&task_capability_lock); + + pE_old = current->cap_effective; + current->cap_effective = pE_new; + + spin_unlock(&task_capability_lock); + + return pE_old; +} + +EXPORT_SYMBOL(cap_set_effective); + /** * sys_capget - get the capabilities of a given process. * @header: pointer to struct that contains capability version and -- cgit v0.10.2 From 1209726ce942047c9fefe7cd427dc36f8e9ded53 Mon Sep 17 00:00:00 2001 From: "Andrew G. Morgan" Date: Fri, 4 Jul 2008 09:59:59 -0700 Subject: security: filesystem capabilities: fix CAP_SETPCAP handling The filesystem capability support meaning for CAP_SETPCAP is less powerful than the non-filesystem capability support. As such, when filesystem capabilities are configured, we should not permit CAP_SETPCAP to 'enhance' the current process through strace manipulation of a child process. Signed-off-by: Andrew G. Morgan Acked-by: Serge Hallyn Cc: David Howells Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/security/commoncap.c b/security/commoncap.c index 5edabc7..33d3433 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -103,10 +103,16 @@ static inline int cap_inh_is_capped(void) return (cap_capable(current, CAP_SETPCAP) != 0); } +static inline int cap_limit_ptraced_target(void) { return 1; } + #else /* ie., ndef CONFIG_SECURITY_FILE_CAPABILITIES */ static inline int cap_block_setpcap(struct task_struct *t) { return 0; } static inline int cap_inh_is_capped(void) { return 1; } +static inline int cap_limit_ptraced_target(void) +{ + return !capable(CAP_SETPCAP); +} #endif /* def CONFIG_SECURITY_FILE_CAPABILITIES */ @@ -342,9 +348,10 @@ void cap_bprm_apply_creds (struct linux_binprm *bprm, int unsafe) bprm->e_uid = current->uid; bprm->e_gid = current->gid; } - if (!capable (CAP_SETPCAP)) { - new_permitted = cap_intersect (new_permitted, - current->cap_permitted); + if (cap_limit_ptraced_target()) { + new_permitted = + cap_intersect(new_permitted, + current->cap_permitted); } } } -- cgit v0.10.2 From 51597acfd3c09073aeea94a0e6f76a931f8c22d2 Mon Sep 17 00:00:00 2001 From: Bastian Blank Date: Fri, 4 Jul 2008 10:00:00 -0700 Subject: Alpha Linux kernel fails with inconsistent kallsyms data The build of the Alpha Linux kernel currently fails[1] with inconsistent kallsyms data. As I never saw that before, I thought about hardware problems. But in fact it is a bug in the Linux kernel. The end of the rodata section is marked with the "__end_rodata" symbol. This symbol have different aligning constraints than the inittext parts and therefor the start marked "_sinittext". Because of that the __end_rodata symbol shifts between < _sinittext and == _sinittext. The later variant is seen as a code symbol and recorded in the kallsyms data. On fix would be to move the exception table a little bit and get some space between that two areas. [1]: http://buildd.debian.org/fetch.cgi?pkg=linux-2.6&arch=alpha&ver=2.6.25-5&stamp=1213919009&file=log&as=raw Cc: maximilian attems Cc: Richard Henderson Cc: Ivan Kokshaysky Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/arch/alpha/kernel/vmlinux.lds.S b/arch/alpha/kernel/vmlinux.lds.S index f13249b..ef37fc1 100644 --- a/arch/alpha/kernel/vmlinux.lds.S +++ b/arch/alpha/kernel/vmlinux.lds.S @@ -25,6 +25,13 @@ SECTIONS } :kernel _etext = .; /* End of text section */ + NOTES :kernel :note + .dummy : { + *(.dummy) + } :kernel + + RODATA + /* Exception table */ . = ALIGN(16); __ex_table : { @@ -33,13 +40,6 @@ SECTIONS __stop___ex_table = .; } - NOTES :kernel :note - .dummy : { - *(.dummy) - } :kernel - - RODATA - /* Will be freed after init */ . = ALIGN(PAGE_SIZE); /* Init code and data */ -- cgit v0.10.2 From 985ee7f224cca8a0d622b24ec399f364c63fc274 Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 4 Jul 2008 10:00:01 -0700 Subject: cpusets: document proc status cpus and mems allowed lists Provide a little documentation for the two new fields, Cpus_allowed_list and Mems_allowed_list, that were added to each /proc//status file a while back. Signed-off-by: Paul Jackson Acked-by: Michael Kerrisk Cc: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 353504d..894b844 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -154,13 +154,15 @@ browsing and modifying the cpusets presently known to the kernel. No new system calls are added for cpusets - all support for querying and modifying cpusets is via this cpuset file system. -The /proc//status file for each task has two added lines, +The /proc//status file for each task has four added lines, displaying the tasks cpus_allowed (on which CPUs it may be scheduled) and mems_allowed (on which Memory Nodes it may obtain memory), -in the format seen in the following example: +in the two formats seen in the following example: Cpus_allowed: ffffffff,ffffffff,ffffffff,ffffffff + Cpus_allowed_list: 0-127 Mems_allowed: ffffffff,ffffffff + Mems_allowed_list: 0-63 Each cpuset is represented by a directory in the cgroup file system containing (on top of the standard cgroup files) the following -- cgit v0.10.2 From 8deacee4f5a64a79a626479ba5d05e5643467513 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Fri, 4 Jul 2008 10:00:01 -0700 Subject: MAINTAINERS: update the email address of Andreas Dilger The old one bounces. Signed-off-by: Geert Uytterhoeven Cc: Andreas Dilger Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 8c4ad23..25cd6cb 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1637,13 +1637,13 @@ S: Maintained EXT3 FILE SYSTEM P: Stephen Tweedie, Andrew Morton -M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com +M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com L: linux-ext4@vger.kernel.org S: Maintained EXT4 FILE SYSTEM P: Stephen Tweedie, Andrew Morton -M: sct@redhat.com, akpm@linux-foundation.org, adilger@clusterfs.com +M: sct@redhat.com, akpm@linux-foundation.org, adilger@sun.com L: linux-ext4@vger.kernel.org S: Maintained -- cgit v0.10.2 From 491539982aa01fa71de93c2a06ac5d890d4cf1e2 Mon Sep 17 00:00:00 2001 From: Mike Miller Date: Fri, 4 Jul 2008 10:00:02 -0700 Subject: cciss: read config to obtain max outstanding commands per controller This patch changes the way we determine the maximum number of outstanding commands for each controller. Most Smart Array controllers can support up to 1024 commands, the notable exceptions are the E200 and E200i. The next generation of controllers which were just added support a mode of operation called Zero Memory Raid (ZMR). In this mode they only support 64 outstanding commands. In Full Function Raid (FFR) mode they support 1024. We have been setting the queue depth by arbitrarily assigning some value for each controller. We needed a better way to set the queue depth to avoid lots of annoying "fifo full" messages. So we made the driver a little smarter. We now read the config table and subtract 4 from the returned value. The -4 is to allow some room for ioctl calls which are not tracked the same way as io commands are tracked. Please consider this for inclusion. Signed-off-by: Mike Miller Cc: Jens Axboe Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c index f552105..d81632c 100644 --- a/drivers/block/cciss.c +++ b/drivers/block/cciss.c @@ -106,35 +106,34 @@ MODULE_DEVICE_TABLE(pci, cciss_pci_device_id); /* board_id = Subsystem Device ID & Vendor ID * product = Marketing Name for the board * access = Address of the struct of function pointers - * nr_cmds = Number of commands supported by controller */ static struct board_type products[] = { - {0x40700E11, "Smart Array 5300", &SA5_access, 512}, - {0x40800E11, "Smart Array 5i", &SA5B_access, 512}, - {0x40820E11, "Smart Array 532", &SA5B_access, 512}, - {0x40830E11, "Smart Array 5312", &SA5B_access, 512}, - {0x409A0E11, "Smart Array 641", &SA5_access, 512}, - {0x409B0E11, "Smart Array 642", &SA5_access, 512}, - {0x409C0E11, "Smart Array 6400", &SA5_access, 512}, - {0x409D0E11, "Smart Array 6400 EM", &SA5_access, 512}, - {0x40910E11, "Smart Array 6i", &SA5_access, 512}, - {0x3225103C, "Smart Array P600", &SA5_access, 512}, - {0x3223103C, "Smart Array P800", &SA5_access, 512}, - {0x3234103C, "Smart Array P400", &SA5_access, 512}, - {0x3235103C, "Smart Array P400i", &SA5_access, 512}, - {0x3211103C, "Smart Array E200i", &SA5_access, 120}, - {0x3212103C, "Smart Array E200", &SA5_access, 120}, - {0x3213103C, "Smart Array E200i", &SA5_access, 120}, - {0x3214103C, "Smart Array E200i", &SA5_access, 120}, - {0x3215103C, "Smart Array E200i", &SA5_access, 120}, - {0x3237103C, "Smart Array E500", &SA5_access, 512}, - {0x323D103C, "Smart Array P700m", &SA5_access, 512}, - {0x3241103C, "Smart Array P212", &SA5_access, 384}, - {0x3243103C, "Smart Array P410", &SA5_access, 384}, - {0x3245103C, "Smart Array P410i", &SA5_access, 384}, - {0x3247103C, "Smart Array P411", &SA5_access, 384}, - {0x3249103C, "Smart Array P812", &SA5_access, 384}, - {0xFFFF103C, "Unknown Smart Array", &SA5_access, 120}, + {0x40700E11, "Smart Array 5300", &SA5_access}, + {0x40800E11, "Smart Array 5i", &SA5B_access}, + {0x40820E11, "Smart Array 532", &SA5B_access}, + {0x40830E11, "Smart Array 5312", &SA5B_access}, + {0x409A0E11, "Smart Array 641", &SA5_access}, + {0x409B0E11, "Smart Array 642", &SA5_access}, + {0x409C0E11, "Smart Array 6400", &SA5_access}, + {0x409D0E11, "Smart Array 6400 EM", &SA5_access}, + {0x40910E11, "Smart Array 6i", &SA5_access}, + {0x3225103C, "Smart Array P600", &SA5_access}, + {0x3223103C, "Smart Array P800", &SA5_access}, + {0x3234103C, "Smart Array P400", &SA5_access}, + {0x3235103C, "Smart Array P400i", &SA5_access}, + {0x3211103C, "Smart Array E200i", &SA5_access}, + {0x3212103C, "Smart Array E200", &SA5_access}, + {0x3213103C, "Smart Array E200i", &SA5_access}, + {0x3214103C, "Smart Array E200i", &SA5_access}, + {0x3215103C, "Smart Array E200i", &SA5_access}, + {0x3237103C, "Smart Array E500", &SA5_access}, + {0x323D103C, "Smart Array P700m", &SA5_access}, + {0x3241103C, "Smart Array P212", &SA5_access}, + {0x3243103C, "Smart Array P410", &SA5_access}, + {0x3245103C, "Smart Array P410i", &SA5_access}, + {0x3247103C, "Smart Array P411", &SA5_access}, + {0x3249103C, "Smart Array P812", &SA5_access}, + {0xFFFF103C, "Unknown Smart Array", &SA5_access}, }; /* How long to wait (in milliseconds) for board to go into simple mode */ @@ -3086,11 +3085,20 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) print_cfg_table(c->cfgtable); #endif /* CCISS_DEBUG */ + /* Some controllers support Zero Memory Raid (ZMR). + * When configured in ZMR mode the number of supported + * commands drops to 64. So instead of just setting an + * arbitrary value we make the driver a little smarter. + * We read the config table to tell us how many commands + * are supported on the controller then subtract 4 to + * leave a little room for ioctl calls. + */ + c->max_commands = readl(&(c->cfgtable->CmdsOutMax)); for (i = 0; i < ARRAY_SIZE(products); i++) { if (board_id == products[i].board_id) { c->product_name = products[i].product_name; c->access = *(products[i].access); - c->nr_cmds = products[i].nr_cmds; + c->nr_cmds = c->max_commands - 4; break; } } @@ -3110,7 +3118,7 @@ static int __devinit cciss_pci_init(ctlr_info_t *c, struct pci_dev *pdev) if (subsystem_vendor_id == PCI_VENDOR_ID_HP) { c->product_name = products[i-1].product_name; c->access = *(products[i-1].access); - c->nr_cmds = products[i-1].nr_cmds; + c->nr_cmds = c->max_commands - 4; printk(KERN_WARNING "cciss: This is an unknown " "Smart Array controller.\n" "cciss: Please update to the latest driver " -- cgit v0.10.2 From e08c1694d9e2138204f2b79b73f0f159074ce2f5 Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 4 Jul 2008 10:00:03 -0700 Subject: olpc: sdhci: add quirk for the Marvell CaFe's vdd/powerup issue This has been sitting around unloved for way too long.. The Marvell CaFe chip's SD implementation chokes during card insertion if one attempts to set the voltage and power up in the same SDHCI_POWER_CONTROL register write. This adds a quirk that does that particular dance in two steps. It also adds an entry to pci_ids.h for the CaFe chip's SD device. Signed-off-by: Andres Salomon Cc: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 07c2048..5b74c8c 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -55,6 +55,8 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<7) /* Controller needs to be reset after each request to stay stable */ #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) +/* Controller needs voltage and power writes to happen separately */ +#define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -128,6 +130,14 @@ static const struct pci_device_id pci_ids[] __devinitdata = { }, { + .vendor = PCI_VENDOR_ID_MARVELL, + .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER, + }, + + { .vendor = PCI_VENDOR_ID_JMICRON, .device = PCI_DEVICE_ID_JMICRON_JMB38X_SD, .subvendor = PCI_ANY_ID, @@ -774,6 +784,14 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned short power) BUG(); } + /* + * At least the CaFe chip gets confused if we set the voltage + * and set turn on power at the same time, so set the voltage first. + */ + if ((host->chip->quirks & SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER)) + writeb(pwr & ~SDHCI_POWER_ON, + host->ioaddr + SDHCI_POWER_CONTROL); + writeb(pwr, host->ioaddr + SDHCI_POWER_CONTROL); out: diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index eafc9d6..6595382 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1520,6 +1520,7 @@ #define PCI_DEVICE_ID_MARVELL_GT64260 0x6430 #define PCI_DEVICE_ID_MARVELL_MV64360 0x6460 #define PCI_DEVICE_ID_MARVELL_MV64460 0x6480 +#define PCI_DEVICE_ID_MARVELL_CAFE_SD 0x4101 #define PCI_VENDOR_ID_V3 0x11b0 #define PCI_DEVICE_ID_V3_V960 0x0001 -- cgit v0.10.2 From 603ded16a308d0a7a17738c973e3c8cbcd5db7dd Mon Sep 17 00:00:00 2001 From: Andres Salomon Date: Fri, 4 Jul 2008 10:00:04 -0700 Subject: olpc: sdhci: add quirk for the Marvell CaFe's interrupt timeout The CaFe chip has a hardware bug that ends up with us getting a timeout value that's too small, causing the following sorts of problems: [ 60.525138] mmcblk0: error -110 transferring data [ 60.531477] end_request: I/O error, dev mmcblk0, sector 1484353 [ 60.533371] Buffer I/O error on device mmcblk0p2, logical block 181632 [ 60.533371] lost page write due to I/O error on mmcblk0p2 Presumably this is an off-by-one error in the hardware. Incrementing the timeout count value that we stuff into the TIMEOUT_CONTROL register gets us a value that works. This bug was originally discovered by Pierre Ossman, I believe. [thanks to Robert Millan for proving that this was still a problem] Signed-off-by: Andres Salomon Cc: Pierre Ossman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 5b74c8c..2b3f06a 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -57,6 +57,8 @@ static unsigned int debug_quirks = 0; #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<8) /* Controller needs voltage and power writes to happen separately */ #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<9) +/* Controller has an off-by-one issue with timeout value */ +#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL (1<<10) static const struct pci_device_id pci_ids[] __devinitdata = { { @@ -134,7 +136,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .device = PCI_DEVICE_ID_MARVELL_CAFE_SD, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER, + .driver_data = SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER | + SDHCI_QUIRK_INCR_TIMEOUT_CONTROL, }, { @@ -479,6 +482,13 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data) break; } + /* + * Compensate for an off-by-one error in the CaFe hardware; otherwise, + * a too-small count gives us interrupt timeouts. + */ + if ((host->chip->quirks & SDHCI_QUIRK_INCR_TIMEOUT_CONTROL)) + count++; + if (count >= 0xF) { printk(KERN_WARNING "%s: Too large timeout requested!\n", mmc_hostname(host->mmc)); -- cgit v0.10.2 From acb7669c125676e63cf96582455509216c39745e Mon Sep 17 00:00:00 2001 From: Stephen Rothwell Date: Fri, 4 Jul 2008 10:00:05 -0700 Subject: cpumask: introduce new APIs In linux-next there is a commit ("x86: Add performance variants of cpumask operators") which, as part of the 4096 cpu support work adds some new APIs for dealing with cpu masks. Add trivial versions of these now so that subsystems can update in a timely manner and avoid conflicts in linux-next and the next merge window. Cc: Mike Travis Cc: Thomas Gleixner Cc: Ingo Molnar Signed-off-by: Stephen Rothwell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/cpumask.h b/include/linux/cpumask.h index 5df3db5..c24875b 100644 --- a/include/linux/cpumask.h +++ b/include/linux/cpumask.h @@ -353,6 +353,10 @@ static inline void __cpus_fold(cpumask_t *dstp, const cpumask_t *origp, for ((cpu) = 0; (cpu) < 1; (cpu)++, (void)mask) #endif /* NR_CPUS */ +#define next_cpu_nr(n, src) next_cpu(n, src) +#define cpus_weight_nr(cpumask) cpus_weight(cpumask) +#define for_each_cpu_mask_nr(cpu, mask) for_each_cpu_mask(cpu, mask) + /* * The following particular system cpumasks and operations manage * possible, present and online cpus. Each of them is a fixed size -- cgit v0.10.2 From 2d5c1be8870383622809c25935fff00d2630c7a5 Mon Sep 17 00:00:00 2001 From: John Blackwood Date: Fri, 4 Jul 2008 10:00:05 -0700 Subject: mm: switch node meminfo Active & Inactive pages to Kbytes There is a bug in the output of /sys/devices/system/node/node[n]/meminfo where the Active and Inactive values are in pages instead of Kbytes. Looks like this occurred back in 2.6.20 when the code was changed over to use node_page_state(). Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/base/node.c b/drivers/base/node.c index 39f3d1b..0f867a0 100644 --- a/drivers/base/node.c +++ b/drivers/base/node.c @@ -84,8 +84,8 @@ static ssize_t node_read_meminfo(struct sys_device * dev, char * buf) nid, K(i.totalram), nid, K(i.freeram), nid, K(i.totalram - i.freeram), - nid, node_page_state(nid, NR_ACTIVE), - nid, node_page_state(nid, NR_INACTIVE), + nid, K(node_page_state(nid, NR_ACTIVE)), + nid, K(node_page_state(nid, NR_INACTIVE)), #ifdef CONFIG_HIGHMEM nid, K(i.totalhigh), nid, K(i.freehigh), -- cgit v0.10.2 From 26ff8c697a2c8f6974c2357d3f01cca91b20c964 Mon Sep 17 00:00:00 2001 From: Rajiv Andrade Date: Fri, 4 Jul 2008 10:00:06 -0700 Subject: Update MAINTAINERS file for the TPM device driver Acked-By: Debora Velarde Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/MAINTAINERS b/MAINTAINERS index 25cd6cb..6476125 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3997,7 +3997,8 @@ W: http://www.buzzard.org.uk/toshiba/ S: Maintained TPM DEVICE DRIVER -P: Kylene Hall +P: Debora Velarde +P: Rajiv Andrade M: tpmdd-devel@lists.sourceforge.net W: http://tpmdd.sourceforge.net P: Marcel Selhorst -- cgit v0.10.2 From d823f6bfec2844493c05961133895de21fa0e02d Mon Sep 17 00:00:00 2001 From: Li Zefan Date: Fri, 4 Jul 2008 10:00:07 -0700 Subject: devcgroup: fix odd behaviour when writing 'a' to devices.allow # cat /devcg/devices.list a *:* rwm # echo a > devices.allow # cat /devcg/devices.list a *:* rwm a 0:0 rwm This is odd and maybe confusing. With this patch, writing 'a' to devices.allow will add 'a *:* rwm' to the whitelist. Also a few fixes and updates to the document. Signed-off-by: Li Zefan Cc: Pavel Emelyanov Cc: Serge E. Hallyn Cc: Paul Menage Cc: Balbir Singh Cc: James Morris Cc: Chris Wright Cc: Stephen Smalley Cc: KAMEZAWA Hiroyuki Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/controllers/devices.txt b/Documentation/controllers/devices.txt index 4dcea42..7cc6e6a 100644 --- a/Documentation/controllers/devices.txt +++ b/Documentation/controllers/devices.txt @@ -13,7 +13,7 @@ either an integer or * for all. Access is a composition of r The root device cgroup starts with rwm to 'all'. A child device cgroup gets a copy of the parent. Administrators can then remove devices from the whitelist or add new entries. A child cgroup can -never receive a device access which is denied its parent. However +never receive a device access which is denied by its parent. However when a device access is removed from a parent it will not also be removed from the child(ren). @@ -29,7 +29,11 @@ allows cgroup 1 to read and mknod the device usually known as echo a > /cgroups/1/devices.deny -will remove the default 'a *:* mrw' entry. +will remove the default 'a *:* rwm' entry. Doing + + echo a > /cgroups/1/devices.allow + +will add the 'a *:* rwm' entry to the whitelist. 3. Security diff --git a/security/device_cgroup.c b/security/device_cgroup.c index baf3488..fd764a0 100644 --- a/security/device_cgroup.c +++ b/security/device_cgroup.c @@ -382,6 +382,8 @@ static ssize_t devcgroup_access_write(struct cgroup *cgroup, struct cftype *cft, case 'a': wh.type = DEV_ALL; wh.access = ACC_MASK; + wh.major = ~0; + wh.minor = ~0; goto handle; case 'b': wh.type = DEV_BLOCK; -- cgit v0.10.2 From 46b6d94eb04a718730c73b83db889341aad0515e Mon Sep 17 00:00:00 2001 From: Paul Jackson Date: Fri, 4 Jul 2008 10:00:09 -0700 Subject: doc: document the relax_domain_level kernel boot argument Document the kernel boot parameter: relax_domain_level=. Signed-off-by: Paul Jackson Cc: Michael Kerrisk Reviewed-by: Li Zefan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/Documentation/cpusets.txt b/Documentation/cpusets.txt index 894b844..1f5a924 100644 --- a/Documentation/cpusets.txt +++ b/Documentation/cpusets.txt @@ -546,6 +546,9 @@ otherwise initial value -1 that indicates the cpuset has no request. ( 4 : search nodes in a chunk of node [on NUMA system] ) ( 5 : search system wide [on NUMA system] ) +The system default is architecture dependent. The system default +can be changed using the relax_domain_level= boot parameter. + This file is per-cpuset and affect the sched domain where the cpuset belongs to. Therefore if the flag 'sched_load_balance' of a cpuset is disabled, then 'sched_relax_domain_level' have no effect since diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 85c6f57..b52f47d 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -1679,6 +1679,10 @@ and is between 256 and 4096 characters. It is defined in the file Format: [,[,...]] See arch/*/kernel/reboot.c or arch/*/kernel/process.c + relax_domain_level= + [KNL, SMP] Set scheduler's default relax_domain_level. + See Documentation/cpusets.txt. + reserve= [KNL,BUGS] Force the kernel to ignore some iomem area reservetop= [X86-32] -- cgit v0.10.2 From bf5b1935d8e42b36a34645788eb261461fe07f2e Mon Sep 17 00:00:00 2001 From: Pierre Ossman Date: Fri, 4 Jul 2008 12:51:20 +0200 Subject: mmc: don't use DMA on newer ENE controllers Even the newer ENE controllers have bugs in their DMA engine that make it too dangerous to use. Disable it until someone has figured out under which conditions it corrupts data. This has caused problems at least once, and can be found as bug report 10925 in the kernel bugzilla. Signed-off-by: Pierre Ossman Signed-off-by: Linus Torvalds diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 2b3f06a..b413aa6 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -119,7 +119,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, }, { @@ -128,7 +129,8 @@ static const struct pci_device_id pci_ids[] __devinitdata = { .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, .driver_data = SDHCI_QUIRK_SINGLE_POWER_WRITE | - SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS, + SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS | + SDHCI_QUIRK_BROKEN_DMA, }, { -- cgit v0.10.2 From d79df630f622806c4d0e116fbaf6ebf6baf53461 Mon Sep 17 00:00:00 2001 From: David Rientjes Date: Fri, 4 Jul 2008 12:24:13 -0700 Subject: mempolicy: mask off internal flags for userspace API Flags considered internal to the mempolicy kernel code are stored as part of the "flags" member of struct mempolicy. Before exposing a policy type to userspace via get_mempolicy(), these internal flags must be masked. Flags exposed to userspace, however, should still be returned to the user. Signed-off-by: David Rientjes Signed-off-by: Linus Torvalds diff --git a/mm/mempolicy.c b/mm/mempolicy.c index a37a503..c94e58b 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -729,7 +729,11 @@ static long do_get_mempolicy(int *policy, nodemask_t *nmask, } else { *policy = pol == &default_policy ? MPOL_DEFAULT : pol->mode; - *policy |= pol->flags; + /* + * Internal mempolicy flags must be masked off before exposing + * the policy to userspace. + */ + *policy |= (pol->flags & MPOL_MODE_FLAGS); } if (vma) { -- cgit v0.10.2 From 4b4f7280d7fd1feeff134c2cf2db32fd583b6c29 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 24 Jun 2008 23:03:48 +0200 Subject: x86 ACPI: normalize segment descriptor register on resume Some Dell laptops enter resume with apparent garbage in the segment descriptor registers (almost certainly the result of a botched transition from protected to real mode.) The only way to clean that up is to enter protected mode ourselves and clean out the descriptor registers. This fixes resume on Dell XPS M1210 and Dell D620. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10927 Signed-off-by: H. Peter Anvin Cc: Andrew Morton Cc: Pavel Machek Cc: pm list Cc: Len Brown Signed-off-by: Ingo Molnar Tested-by: Kirill A. Shutemov Signed-off-by: Rafael J. Wysocki Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/acpi/realmode/wakeup.S b/arch/x86/kernel/acpi/realmode/wakeup.S index f9b77fb..3355973 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.S +++ b/arch/x86/kernel/acpi/realmode/wakeup.S @@ -5,6 +5,7 @@ #include #include #include +#include .code16 .section ".header", "a" @@ -24,6 +25,11 @@ pmode_gdt: .quad 0 realmode_flags: .long 0 real_magic: .long 0 trampoline_segment: .word 0 +_pad1: .byte 0 +wakeup_jmp: .byte 0xea /* ljmpw */ +wakeup_jmp_off: .word 3f +wakeup_jmp_seg: .word 0 +wakeup_gdt: .quad 0, 0, 0 signature: .long 0x51ee1111 .text @@ -34,11 +40,34 @@ _start: cli cld + /* Apparently some dimwit BIOS programmers don't know how to + program a PM to RM transition, and we might end up here with + junk in the data segment descriptor registers. The only way + to repair that is to go into PM and fix it ourselves... */ + movw $16, %cx + lgdtl %cs:wakeup_gdt + movl %cr0, %eax + orb $X86_CR0_PE, %al + movl %eax, %cr0 + jmp 1f +1: ljmpw $8, $2f +2: + movw %cx, %ds + movw %cx, %es + movw %cx, %ss + movw %cx, %fs + movw %cx, %gs + + andb $~X86_CR0_PE, %al + movl %eax, %cr0 + jmp wakeup_jmp +3: /* Set up segments */ movw %cs, %ax movw %ax, %ds movw %ax, %es movw %ax, %ss + lidtl wakeup_idt movl $wakeup_stack_end, %esp @@ -98,7 +127,14 @@ bogus_real_magic: jmp 1b .data - .balign 4 + .balign 8 + + /* This is the standard real-mode IDT */ +wakeup_idt: + .word 0xffff /* limit */ + .long 0 /* address */ + .word 0 + .globl HEAP, heap_end HEAP: .long wakeup_heap diff --git a/arch/x86/kernel/acpi/realmode/wakeup.h b/arch/x86/kernel/acpi/realmode/wakeup.h index ef8166f..69d38d0 100644 --- a/arch/x86/kernel/acpi/realmode/wakeup.h +++ b/arch/x86/kernel/acpi/realmode/wakeup.h @@ -24,6 +24,11 @@ struct wakeup_header { u32 realmode_flags; u32 real_magic; u16 trampoline_segment; /* segment with trampoline code, 64-bit only */ + u8 _pad1; + u8 wakeup_jmp; + u16 wakeup_jmp_off; + u16 wakeup_jmp_seg; + u64 wakeup_gdt[3]; u32 signature; /* To check we have correct structure */ } __attribute__((__packed__)); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index afc25ee..36af01f 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -50,6 +50,20 @@ int acpi_save_state_mem(void) header->video_mode = saved_video_mode; + header->wakeup_jmp_seg = acpi_wakeup_address >> 4; + /* GDT[0]: GDT self-pointer */ + header->wakeup_gdt[0] = + (u64)(sizeof(header->wakeup_gdt) - 1) + + ((u64)(acpi_wakeup_address + + ((char *)&header->wakeup_gdt - (char *)acpi_realmode)) + << 16); + /* GDT[1]: real-mode-like code segment */ + header->wakeup_gdt[1] = (0x009bULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + /* GDT[2]: real-mode-like data segment */ + header->wakeup_gdt[2] = (0x0093ULL << 40) + + ((u64)acpi_wakeup_address << 16) + 0xffff; + #ifndef CONFIG_64BIT store_gdt((struct desc_ptr *)&header->pmode_gdt); @@ -111,7 +125,7 @@ void __init acpi_reserve_bootmem(void) return; } - acpi_wakeup_address = acpi_realmode; + acpi_wakeup_address = virt_to_phys((void *)acpi_realmode); } diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c index c3b0cd8..495c63a 100644 --- a/drivers/acpi/sleep/main.c +++ b/drivers/acpi/sleep/main.c @@ -36,9 +36,8 @@ static int acpi_sleep_prepare(u32 acpi_state) if (!acpi_wakeup_address) { return -EFAULT; } - acpi_set_firmware_waking_vector((acpi_physical_address) - virt_to_phys((void *) - acpi_wakeup_address)); + acpi_set_firmware_waking_vector( + (acpi_physical_address)acpi_wakeup_address); } ACPI_FLUSH_CPU_CACHE(); -- cgit v0.10.2 From 64e83b5a919a65eb35b63dd7e07c188379ff8ce6 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sat, 5 Jul 2008 00:05:30 +0200 Subject: x86 ACPI: fix resume from suspend to RAM on uniprocessor x86-64 Since the trampoline code is now used for ACPI resume from suspend to RAM, the trampoline page tables have to be fixed up during boot not only on SMP systems, but also on UP systems that use the trampoline. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10923 Reported-by: Dionisus Torimens Signed-off-by: Rafael J. Wysocki Cc: Andi Kleen Cc: Andrew Morton Cc: pm list Signed-off-by: Ingo Molnar diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 10a1955..b817974 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -128,7 +128,7 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) -#ifdef CONFIG_SMP +#ifdef CONFIG_X86_TRAMPOLINE addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) #endif -- cgit v0.10.2 From 3b7253238801a7b97b3929d8db2fa7a0721fb17b Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Mon, 16 Jun 2008 15:51:08 -0700 Subject: softlockup: print a module list on being stuck Most places in the kernel that go BUG: print a module list (which is very useful for doing statistics and finding patterns), however the softlockup detector does not do this yet. This patch adds the one line change to fix this gap. Signed-off-by: Arjan van de Ven Signed-off-by: Ingo Molnar diff --git a/kernel/softlockup.c b/kernel/softlockup.c index c828c23..a272d78 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -120,6 +120,7 @@ void softlockup_tick(void) printk(KERN_ERR "BUG: soft lockup - CPU#%d stuck for %lus! [%s:%d]\n", this_cpu, now - touch_timestamp, current->comm, task_pid_nr(current)); + print_modules(); if (regs) show_regs(regs); else -- cgit v0.10.2 From 7cd95f56cb61f5348d062527c9d3653196f6e629 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 5 Jul 2008 20:30:51 +0200 Subject: ide: fix hwif->gendev refcounting class->dev_release is called by device_release() iff dev->release is not present so ide_port_class_release() is never called and the last hwif->gendev reference is not dropped. Fix it by removing ide_port_class_release() and get_device() call from ide_register_port() (device_create_drvdata() takes a hwif->gendev reference anyway). This patch fixes hang on wait_for_completion(&hwif->gendev_rel_comp) in ide_unregister() reported by Pavel Machek. Cc: Pavel Machek Cc: "Rafael J. Wysocki" Cc: Greg KH Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 380fa0c..d27061b 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -646,8 +646,6 @@ static int ide_register_port(ide_hwif_t *hwif) goto out; } - get_device(&hwif->gendev); - hwif->portdev = device_create_drvdata(ide_port_class, &hwif->gendev, MKDEV(0, 0), hwif, hwif->name); if (IS_ERR(hwif->portdev)) { diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index c758dcb..2460777 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -1094,13 +1094,6 @@ struct bus_type ide_bus_type = { EXPORT_SYMBOL_GPL(ide_bus_type); -static void ide_port_class_release(struct device *portdev) -{ - ide_hwif_t *hwif = dev_get_drvdata(portdev); - - put_device(&hwif->gendev); -} - int ide_vlb_clk; EXPORT_SYMBOL_GPL(ide_vlb_clk); @@ -1305,7 +1298,6 @@ static int __init ide_init(void) ret = PTR_ERR(ide_port_class); goto out_port_class; } - ide_port_class->dev_release = ide_port_class_release; init_ide_data(); -- cgit v0.10.2 From bd8a59e29726b2a5ff7baefe995febdc63044a61 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 5 Jul 2008 20:30:51 +0200 Subject: ide: ide_unregister() warm-plug bugfix Fix ide_unregister() to work for ports with no devices attached to them. Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index 2460777..b31359c 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -315,13 +315,14 @@ void ide_unregister(ide_hwif_t *hwif) BUG_ON(in_interrupt()); BUG_ON(irqs_disabled()); + mutex_lock(&ide_cfg_mtx); - spin_lock_irq(&ide_lock); - if (!hwif->present) - goto abort; - __ide_port_unregister_devices(hwif); - hwif->present = 0; + spin_lock_irq(&ide_lock); + if (hwif->present) { + __ide_port_unregister_devices(hwif); + hwif->present = 0; + } spin_unlock_irq(&ide_lock); ide_proc_unregister_port(hwif); @@ -359,7 +360,6 @@ void ide_unregister(ide_hwif_t *hwif) /* restore hwif data to pristine status */ ide_init_port_data(hwif, hwif->index); -abort: spin_unlock_irq(&ide_lock); mutex_unlock(&ide_cfg_mtx); } -- cgit v0.10.2 From 2b54ed9467697b0ce2d60d89e5e4253c9e322c26 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sat, 5 Jul 2008 20:30:51 +0200 Subject: ide: ide_unregister() locking bugfix Holding ide_lock for ide_release_dma_engine() call is unnecessary and triggers WARN_ON(irqs_disabled()) in dma_free_coherent(). Signed-off-by: Bartlomiej Zolnierkiewicz diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index b31359c..300431d 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -352,15 +352,15 @@ void ide_unregister(ide_hwif_t *hwif) blk_unregister_region(MKDEV(hwif->major, 0), MAX_DRIVES<sg_table); unregister_blkdev(hwif->major, hwif->name); - spin_lock_irq(&ide_lock); if (hwif->dma_base) ide_release_dma_engine(hwif); + spin_lock_irq(&ide_lock); /* restore hwif data to pristine status */ ide_init_port_data(hwif, hwif->index); - spin_unlock_irq(&ide_lock); + mutex_unlock(&ide_cfg_mtx); } -- cgit v0.10.2 From d28f87aa87ce8b196349d7c306a7e6fe3abd7155 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 5 Jul 2008 13:10:50 +0900 Subject: ahci: give another shot at clearing all bits in irq_stat Commit ea0c62f7cf70f13a67830471b613337bd0c9a62e tried to clear all bits in irq_stat but it didn't actually achieve that as irq_stat was anded with port_map right after read. This patch makes ahci driver always use the unmasked value to clear irq_status. While at it, add explanation on the peculiarities of ahci IRQ clearing. This was spotted by Linus Torvalds. Signed-off-by: Tejun Heo Signed-off-by: Linus Torvalds diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 061817a..5e6468a 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -1777,7 +1777,7 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) struct ahci_host_priv *hpriv; unsigned int i, handled = 0; void __iomem *mmio; - u32 irq_stat; + u32 irq_stat, irq_masked; VPRINTK("ENTER\n"); @@ -1786,16 +1786,17 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) /* sigh. 0xffffffff is a valid return from h/w */ irq_stat = readl(mmio + HOST_IRQ_STAT); - irq_stat &= hpriv->port_map; if (!irq_stat) return IRQ_NONE; + irq_masked = irq_stat & hpriv->port_map; + spin_lock(&host->lock); for (i = 0; i < host->n_ports; i++) { struct ata_port *ap; - if (!(irq_stat & (1 << i))) + if (!(irq_masked & (1 << i))) continue; ap = host->ports[i]; @@ -1812,6 +1813,15 @@ static irqreturn_t ahci_interrupt(int irq, void *dev_instance) handled = 1; } + /* HOST_IRQ_STAT behaves as level triggered latch meaning that + * it should be cleared after all the port events are cleared; + * otherwise, it will raise a spurious interrupt after each + * valid one. Please read section 10.6.2 of ahci 1.1 for more + * information. + * + * Also, use the unmasked value to clear interrupt as spurious + * pending event on a dummy port might cause screaming IRQ. + */ writel(irq_stat, mmio + HOST_IRQ_STAT); spin_unlock(&host->lock); -- cgit v0.10.2 From 20cbc972617069c1ed434f62151e4de57d26ea46 Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 5 Jul 2008 12:29:05 -0700 Subject: Fix clear_refs_write() use of struct mm_walk Don't use a static entry, so as to prevent races during concurrent use of this function. Reported-by: Alexey Dobriyan Cc: Matt Mackall Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index ab8ccc9..05053d7 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -476,10 +476,10 @@ static ssize_t clear_refs_write(struct file *file, const char __user *buf, return -ESRCH; mm = get_task_mm(task); if (mm) { - static struct mm_walk clear_refs_walk; - memset(&clear_refs_walk, 0, sizeof(clear_refs_walk)); - clear_refs_walk.pmd_entry = clear_refs_pte_range; - clear_refs_walk.mm = mm; + struct mm_walk clear_refs_walk = { + .pmd_entry = clear_refs_pte_range, + .mm = mm, + }; down_read(&mm->mmap_sem); for (vma = mm->mmap; vma; vma = vma->vm_next) { clear_refs_walk.private = vma; -- cgit v0.10.2 From ca31e146d5c2fe51498e619eb3a64782d02e310a Mon Sep 17 00:00:00 2001 From: Eduard - Gabriel Munteanu Date: Sat, 5 Jul 2008 12:14:23 +0300 Subject: Move _RET_IP_ and _THIS_IP_ to include/linux/kernel.h These two macros are useful beyond lock debugging. Moved definitions from include/linux/debug_locks.h to include/linux/kernel.h, so code that needs them does not have to include the former, which would have been a less intuitive choice of a header. Signed-off-by: Eduard - Gabriel Munteanu Acked-by: Pekka Enberg Signed-off-by: Linus Torvalds diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index f4a5871..4aaa4af 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -1,6 +1,8 @@ #ifndef __LINUX_DEBUG_LOCKING_H #define __LINUX_DEBUG_LOCKING_H +#include + struct task_struct; extern int debug_locks; @@ -11,14 +13,6 @@ extern int debug_locks_silent; */ extern int debug_locks_off(void); -/* - * In the debug case we carry the caller's instruction pointer into - * other functions, but we dont want the function argument overhead - * in the nondebug case - hence these macros: - */ -#define _RET_IP_ (unsigned long)__builtin_return_address(0) -#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) - #define DEBUG_LOCKS_WARN_ON(c) \ ({ \ int __ret = 0; \ diff --git a/include/linux/kernel.h b/include/linux/kernel.h index 792bf0a..2e70006 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -46,6 +46,9 @@ extern const char linux_proc_banner[]; #define DIV_ROUND_UP(n,d) (((n) + (d) - 1) / (d)) #define roundup(x, y) ((((x) + ((y) - 1)) / (y)) * (y)) +#define _RET_IP_ (unsigned long)__builtin_return_address(0) +#define _THIS_IP_ ({ __label__ __here; __here: (unsigned long)&&__here; }) + #ifdef CONFIG_LBD # include # define sector_div(a, b) do_div(a, b) -- cgit v0.10.2 From 5d7e0d2bd98ef4f5a16ac9da1987ae655368dd6a Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Sat, 5 Jul 2008 01:02:01 -0700 Subject: Fix pagemap_read() use of struct mm_walk Fix some issues in pagemap_read noted by Alexey: - initialize pagemap_walk.mm to "mm" , so the code starts working as advertised - initialize ->private to "&pm" so it wouldn't immediately oops in pagemap_pte_hole() - unstatic struct pagemap_walk, so two threads won't fsckup each other (including those started by root, including flipping ->mm when you don't have permissions) - pagemap_read() contains two calls to ptrace_may_attach(), second one looks unneeded. - avoid possible kmalloc(0) and integer wraparound. Cc: Alexey Dobriyan Cc: Matt Mackall Signed-off-by: Andrew Morton [ Personally, I'd just remove the functionality entirely - Linus ] Signed-off-by: Linus Torvalds diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 05053d7..c492449 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -602,11 +602,6 @@ static int pagemap_pte_range(pmd_t *pmd, unsigned long addr, unsigned long end, return err; } -static struct mm_walk pagemap_walk = { - .pmd_entry = pagemap_pte_range, - .pte_hole = pagemap_pte_hole -}; - /* * /proc/pid/pagemap - an array mapping virtual pages to pfns * @@ -641,6 +636,11 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, struct pagemapread pm; int pagecount; int ret = -ESRCH; + struct mm_walk pagemap_walk; + unsigned long src; + unsigned long svpfn; + unsigned long start_vaddr; + unsigned long end_vaddr; if (!task) goto out; @@ -659,11 +659,15 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, if (!mm) goto out_task; - ret = -ENOMEM; + uaddr = (unsigned long)buf & PAGE_MASK; uend = (unsigned long)(buf + count); pagecount = (PAGE_ALIGN(uend) - uaddr) / PAGE_SIZE; - pages = kmalloc(pagecount * sizeof(struct page *), GFP_KERNEL); + ret = 0; + if (pagecount == 0) + goto out_mm; + pages = kcalloc(pagecount, sizeof(struct page *), GFP_KERNEL); + ret = -ENOMEM; if (!pages) goto out_mm; @@ -684,33 +688,33 @@ static ssize_t pagemap_read(struct file *file, char __user *buf, pm.out = (u64 *)buf; pm.end = (u64 *)(buf + count); - if (!ptrace_may_attach(task)) { - ret = -EIO; - } else { - unsigned long src = *ppos; - unsigned long svpfn = src / PM_ENTRY_BYTES; - unsigned long start_vaddr = svpfn << PAGE_SHIFT; - unsigned long end_vaddr = TASK_SIZE_OF(task); - - /* watch out for wraparound */ - if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT) - start_vaddr = end_vaddr; - - /* - * The odds are that this will stop walking way - * before end_vaddr, because the length of the - * user buffer is tracked in "pm", and the walk - * will stop when we hit the end of the buffer. - */ - ret = walk_page_range(start_vaddr, end_vaddr, - &pagemap_walk); - if (ret == PM_END_OF_BUFFER) - ret = 0; - /* don't need mmap_sem for these, but this looks cleaner */ - *ppos += (char *)pm.out - buf; - if (!ret) - ret = (char *)pm.out - buf; - } + pagemap_walk.pmd_entry = pagemap_pte_range; + pagemap_walk.pte_hole = pagemap_pte_hole; + pagemap_walk.mm = mm; + pagemap_walk.private = ± + + src = *ppos; + svpfn = src / PM_ENTRY_BYTES; + start_vaddr = svpfn << PAGE_SHIFT; + end_vaddr = TASK_SIZE_OF(task); + + /* watch out for wraparound */ + if (svpfn > TASK_SIZE_OF(task) >> PAGE_SHIFT) + start_vaddr = end_vaddr; + + /* + * The odds are that this will stop walking way + * before end_vaddr, because the length of the + * user buffer is tracked in "pm", and the walk + * will stop when we hit the end of the buffer. + */ + ret = walk_page_range(start_vaddr, end_vaddr, &pagemap_walk); + if (ret == PM_END_OF_BUFFER) + ret = 0; + /* don't need mmap_sem for these, but this looks cleaner */ + *ppos += (char *)pm.out - buf; + if (!ret) + ret = (char *)pm.out - buf; out_pages: for (; pagecount; pagecount--) { -- cgit v0.10.2 From b7279469d66b55119784b8b9529c99c1955fe747 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 5 Jul 2008 15:53:22 -0700 Subject: Linux 2.6.26-rc9 diff --git a/Makefile b/Makefile index 6aff5f4..6315424 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 26 -EXTRAVERSION = -rc8 +EXTRAVERSION = -rc9 NAME = Rotary Wombat # *DOCUMENTATION* -- cgit v0.10.2