From 479696840239e0cc43efb3c917bdcad2174d2215 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Mon, 15 Oct 2012 21:48:48 -0300 Subject: i82975x_edac: Fix dimm label initialization The driver has only 4 hardcoded labels, but allows much more memory. Fix it by removing the hardcoded logic, using snprintf() instead. [ 19.833972] general protection fault: 0000 [#1] SMP [ 19.837733] Modules linked in: i82975x_edac(+) edac_core firewire_ohci firewire_core crc_itu_t nouveau mxm_wmi wmi video i2c_algo_bit drm_kms_helper ttm drm i2c_core [ 19.837733] CPU 0 [ 19.837733] Pid: 390, comm: udevd Not tainted 3.6.1-1.fc17.x86_64.debug #1 Dell Inc. Precision WorkStation 390 /0MY510 [ 19.837733] RIP: 0010:[] [] strncpy+0x18/0x30 [ 19.837733] RSP: 0018:ffff880078535b68 EFLAGS: 00010202 [ 19.837733] RAX: ffff880069fa9708 RBX: ffff880078588000 RCX: ffff880069fa9708 [ 19.837733] RDX: 000000000000001f RSI: 5f706f5f63616465 RDI: ffff880069fa9708 [ 19.837733] RBP: ffff880078535b68 R08: ffff880069fa9727 R09: 000000000000fffe [ 19.837733] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000003 [ 19.837733] R13: 0000000000000000 R14: ffff880069fa9290 R15: ffff880079624a80 [ 19.837733] FS: 00007f3de01ee840(0000) GS:ffff88007c400000(0000) knlGS:0000000000000000 [ 19.837733] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 19.837733] CR2: 00007f3de00b9000 CR3: 0000000078dbc000 CR4: 00000000000007f0 [ 19.837733] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 19.837733] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 19.837733] Process udevd (pid: 390, threadinfo ffff880078534000, task ffff880079642450) [ 19.837733] Stack: [ 19.837733] ffff880078535c18 ffffffffa017c6b8 00040000816d627f ffff880079624a88 [ 19.837733] ffffc90004cd6000 ffff880079624520 ffff88007ac21148 0000000000000000 [ 19.837733] 0000000000000000 0004000000000000 feda000078535bc8 ffffffff810d696d [ 19.837733] Call Trace: [ 19.837733] [] i82975x_init_one+0x2e6/0x3e6 [i82975x_edac] ... Fix bug reported at: https://bugzilla.redhat.com/show_bug.cgi?id=848149 And, very likely: https://bbs.archlinux.org/viewtopic.php?id=148033 https://bugzilla.kernel.org/show_bug.cgi?id=47171 Cc: Alan Cox Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/edac/i82975x_edac.c b/drivers/edac/i82975x_edac.c index 069e26c..a980204 100644 --- a/drivers/edac/i82975x_edac.c +++ b/drivers/edac/i82975x_edac.c @@ -370,10 +370,6 @@ static enum dev_type i82975x_dram_type(void __iomem *mch_window, int rank) static void i82975x_init_csrows(struct mem_ctl_info *mci, struct pci_dev *pdev, void __iomem *mch_window) { - static const char *labels[4] = { - "DIMM A1", "DIMM A2", - "DIMM B1", "DIMM B2" - }; struct csrow_info *csrow; unsigned long last_cumul_size; u8 value; @@ -423,9 +419,10 @@ static void i82975x_init_csrows(struct mem_ctl_info *mci, dimm = mci->csrows[index]->channels[chan]->dimm; dimm->nr_pages = nr_pages / csrow->nr_channels; - strncpy(csrow->channels[chan]->dimm->label, - labels[(index >> 1) + (chan * 2)], - EDAC_MC_LABEL_LEN); + + snprintf(csrow->channels[chan]->dimm->label, EDAC_MC_LABEL_LEN, "DIMM %c%d", + (chan == 0) ? 'A' : 'B', + index); dimm->grain = 1 << 7; /* 128Byte cache-line resolution */ dimm->dtype = i82975x_dram_type(mch_window, index); dimm->mtype = MEM_DDR2; /* I82975x supports only DDR2 */ -- cgit v0.10.2 From 24bef66e74d647aebd34e0bef7693512b7912029 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Wed, 24 Oct 2012 10:30:01 -0200 Subject: edac: Fix the dimm filling for csrows-based layouts The driver is currently filling data in a wrong way, on drivers for csrows-based memory controller, when the first layer is a csrow. This is not easily to notice, as, in general, memories are filed in dual, interleaved, symetric mode, as very few memory controllers support asymetric modes. While digging into a bug for i82795_edac driver, the asymetric mode there is now working, allowing us to fill the machine with 4x1GB ranks at channel 0, and 2x512GB at channel 1: Channel 0 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM A0: from page 0x00000000 to 0x0003ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A1: from page 0x00040000 to 0x0007ffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A2: from page 0x00080000 to 0x000bffff (size: 0x00040000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM A3: from page 0x000c0000 to 0x000fffff (size: 0x00040000 pages) Channel 1 ranks: EDAC DEBUG: i82975x_init_csrows: DIMM B0: from page 0x00100000 to 0x0011ffff (size: 0x00020000 pages) EDAC DEBUG: i82975x_init_csrows: DIMM B1: from page 0x00120000 to 0x0013ffff (size: 0x00020000 pages) Instead of properly showing the memories as such, before this patch, it shows the memory layout as: +-----------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | ----------+-----------------------------------+ channel1: | 1024 MB | 1024 MB | 512 MB | channel0: | 1024 MB | 1024 MB | 512 MB | ----------+-----------------------------------+ as if both channels were symetric, grouping the DIMMs on a wrong layout. After this patch, the memory is correctly represented. So, for csrows at layers[0], it shows: +-----------------------------------------------+ | mc0 | | csrow0 | csrow1 | csrow2 | csrow3 | ----------+-----------------------------------------------+ channel1: | 512 MB | 512 MB | 0 MB | 0 MB | channel0: | 1024 MB | 1024 MB | 1024 MB | 1024 MB | ----------+-----------------------------------------------+ For csrows at layers[1], it shows: +-----------------------+ | mc0 | | channel0 | channel1 | --------+-----------------------+ csrow3: | 1024 MB | 0 MB | csrow2: | 1024 MB | 0 MB | --------+-----------------------+ csrow1: | 1024 MB | 512 MB | csrow0: | 1024 MB | 512 MB | --------+-----------------------+ So, no matter of what comes first, the information between channel and csrow will be properly represented. Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/edac/edac_mc.c b/drivers/edac/edac_mc.c index d5dc9da..81eb9fd 100644 --- a/drivers/edac/edac_mc.c +++ b/drivers/edac/edac_mc.c @@ -416,10 +416,18 @@ struct mem_ctl_info *edac_mc_alloc(unsigned mc_num, dimm->cschannel = chn; /* Increment csrow location */ - row++; - if (row == tot_csrows) { - row = 0; + if (layers[0].is_virt_csrow) { chn++; + if (chn == tot_channels) { + chn = 0; + row++; + } + } else { + row++; + if (row == tot_csrows) { + row = 0; + chn++; + } } /* Increment dimm location */ -- cgit v0.10.2 From 7e06b7a3333f5c7a0cec12aff20d39c5c87c0795 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Thu, 18 Oct 2012 15:54:45 +0200 Subject: i7300_edac: Fix error flag testing * Right-shift the values in GET_FBD_FAT_IDX and GET_FBD_NF_IDX, so that the callers get the result they expect. * Fix definition of FERR_FAT_FBD_ERR_MASK. * Call GET_FBD_NF_IDX, not GET_FBD_FAT_IDX, when operating on register FERR_NF_FBD. We were lucky they have the same definition. This fixes kernel bug #44131: https://bugzilla.kernel.org/show_bug.cgi?id=44131 Signed-off-by: Jean Delvare Cc: Mauro Carvalho Chehab Cc: Doug Thompson Cc: stable@vger.kernel.org Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/edac/i7300_edac.c b/drivers/edac/i7300_edac.c index a09d066..9d669cd 100644 --- a/drivers/edac/i7300_edac.c +++ b/drivers/edac/i7300_edac.c @@ -197,8 +197,8 @@ static const char *ferr_fat_fbd_name[] = { [0] = "Memory Write error on non-redundant retry or " "FBD configuration Write error on retry", }; -#define GET_FBD_FAT_IDX(fbderr) (fbderr & (3 << 28)) -#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3)) +#define GET_FBD_FAT_IDX(fbderr) (((fbderr) >> 28) & 3) +#define FERR_FAT_FBD_ERR_MASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 22)) #define FERR_NF_FBD 0xa0 static const char *ferr_nf_fbd_name[] = { @@ -225,7 +225,7 @@ static const char *ferr_nf_fbd_name[] = { [1] = "Aliased Uncorrectable Non-Mirrored Demand Data ECC", [0] = "Uncorrectable Data ECC on Replay", }; -#define GET_FBD_NF_IDX(fbderr) (fbderr & (3 << 28)) +#define GET_FBD_NF_IDX(fbderr) (((fbderr) >> 28) & 3) #define FERR_NF_FBD_ERR_MASK ((1 << 24) | (1 << 23) | (1 << 22) | (1 << 21) |\ (1 << 18) | (1 << 17) | (1 << 16) | (1 << 15) |\ (1 << 14) | (1 << 13) | (1 << 11) | (1 << 10) |\ @@ -464,7 +464,7 @@ static void i7300_process_fbd_error(struct mem_ctl_info *mci) errnum = find_first_bit(&errors, ARRAY_SIZE(ferr_nf_fbd_name)); specific = GET_ERR_FROM_TABLE(ferr_nf_fbd_name, errnum); - branch = (GET_FBD_FAT_IDX(error_reg) == 2) ? 1 : 0; + branch = (GET_FBD_NF_IDX(error_reg) == 2) ? 1 : 0; pci_read_config_dword(pvt->pci_dev_16_1_fsb_addr_map, REDMEMA, &syndrome); -- cgit v0.10.2 From 41fd087f5d452361d58cb618b1b8ecf749b68ad6 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Fri, 19 Oct 2012 08:24:18 -0300 Subject: [media] s5p-fimc: Don't ignore return value of vb2_queue_init() Add missing checks for return value of vb2_queue_init(), after this function has been modified recently to not throw BUG_ON(). This eliminates related compiler warnings, drivers/media/platform/s5p-fimc/fimc-lite.c: In function fimc_lite_subdev_registered: drivers/media/platform/s5p-fimc/fimc-lite.c:1256:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] drivers/media/platform/s5p-fimc/fimc-capture.c: In function fimc_register_capture_device: drivers/media/platform/s5p-fimc/fimc-capture.c:1739:16: warning: ignoring return value of vb2_queue_init, declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c index 367efd1..3d39d97 100644 --- a/drivers/media/platform/s5p-fimc/fimc-capture.c +++ b/drivers/media/platform/s5p-fimc/fimc-capture.c @@ -1736,7 +1736,9 @@ static int fimc_register_capture_device(struct fimc_dev *fimc, q->mem_ops = &vb2_dma_contig_memops; q->buf_struct_size = sizeof(struct fimc_vid_buffer); - vb2_queue_init(q); + ret = vb2_queue_init(q); + if (ret) + goto err_ent; vid_cap->vd_pad.flags = MEDIA_PAD_FL_SINK; ret = media_entity_init(&vfd->entity, 1, &vid_cap->vd_pad, 0); diff --git a/drivers/media/platform/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c index 70bcf39..9db246b 100644 --- a/drivers/media/platform/s5p-fimc/fimc-lite.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite.c @@ -1253,7 +1253,9 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd) q->buf_struct_size = sizeof(struct flite_buffer); q->drv_priv = fimc; - vb2_queue_init(q); + ret = vb2_queue_init(q); + if (ret < 0) + return ret; fimc->vd_pad.flags = MEDIA_PAD_FL_SINK; ret = media_entity_init(&vfd->entity, 1, &fimc->vd_pad, 0); -- cgit v0.10.2 From 02924ca45893adb9ad2383696006272fe8c2ef64 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Mon, 22 Oct 2012 06:12:05 -0300 Subject: [media] s5p-csis: Select S5P_SETUP_MIPIPHY After commit ccbfd1d49dc0d6a "[media] s5p-csis: Replace phy_enable platform.." s5p-csis depends now on the commmon MIPI CSIS/MIPI DSIM DPHY control code. Add select S5P_SETUP_MIPIPHY to make this dependency explicit, until the code from arch/arm/plat-samsung is moved to drivers/ directory and converted to a regular phy driver module. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/Kconfig b/drivers/media/platform/s5p-fimc/Kconfig index 8f090a8..c16b20d 100644 --- a/drivers/media/platform/s5p-fimc/Kconfig +++ b/drivers/media/platform/s5p-fimc/Kconfig @@ -24,6 +24,7 @@ config VIDEO_S5P_FIMC config VIDEO_S5P_MIPI_CSIS tristate "S5P/EXYNOS MIPI-CSI2 receiver (MIPI-CSIS) driver" depends on REGULATOR + select S5P_SETUP_MIPIPHY help This is a V4L2 driver for Samsung S5P and EXYNOS4 SoC MIPI-CSI2 receiver (MIPI-CSIS) devices. -- cgit v0.10.2 From afd7348c60b4f5d3d4d041aa0c29a6258a476b89 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 25 Oct 2012 10:48:44 -0300 Subject: [media] s5p-fimc: Fix platform entities registration Make sure the platform sub-devices are registered to the media device driver only when v4l2_device_register_subdev() succeeds. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index 80ada58..a553702 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -345,25 +345,23 @@ static int fimc_register_callback(struct device *dev, void *p) struct fimc_dev *fimc = dev_get_drvdata(dev); struct v4l2_subdev *sd = &fimc->vid_cap.subdev; struct fimc_md *fmd = p; - int ret = 0; - - if (!fimc || !fimc->pdev) - return 0; + int ret; - if (fimc->pdev->id < 0 || fimc->pdev->id >= FIMC_MAX_DEVS) + if (fimc == NULL || fimc->id >= FIMC_MAX_DEVS) return 0; - fimc->pipeline_ops = &fimc_pipeline_ops; - fmd->fimc[fimc->pdev->id] = fimc; sd->grp_id = FIMC_GROUP_ID; ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); if (ret) { v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC.%d (%d)\n", fimc->id, ret); + return ret; } - return ret; + fimc->pipeline_ops = &fimc_pipeline_ops; + fmd->fimc[fimc->id] = fimc; + return 0; } static int fimc_lite_register_callback(struct device *dev, void *p) @@ -373,14 +371,9 @@ static int fimc_lite_register_callback(struct device *dev, void *p) struct fimc_md *fmd = p; int ret; - if (fimc == NULL) + if (fimc == NULL || fimc->index >= FIMC_LITE_MAX_DEVS) return 0; - if (fimc->index >= FIMC_LITE_MAX_DEVS) - return 0; - - fimc->pipeline_ops = &fimc_pipeline_ops; - fmd->fimc_lite[fimc->index] = fimc; sd->grp_id = FLITE_GROUP_ID; ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); @@ -388,8 +381,12 @@ static int fimc_lite_register_callback(struct device *dev, void *p) v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC-LITE.%d (%d)\n", fimc->index, ret); + return ret; } - return ret; + + fimc->pipeline_ops = &fimc_pipeline_ops; + fmd->fimc_lite[fimc->index] = fimc; + return 0; } static int csis_register_callback(struct device *dev, void *p) @@ -407,10 +404,12 @@ static int csis_register_callback(struct device *dev, void *p) v4l2_info(sd, "csis%d sd: %s\n", pdev->id, sd->name); id = pdev->id < 0 ? 0 : pdev->id; - fmd->csis[id].sd = sd; sd->grp_id = CSIS_GROUP_ID; + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); - if (ret) + if (!ret) + fmd->csis[id].sd = sd; + else v4l2_err(&fmd->v4l2_dev, "Failed to register CSIS subdevice: %d\n", ret); return ret; -- cgit v0.10.2 From 8163ec0b2648c2f7e84edb969dde537ec45f1666 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 25 Oct 2012 10:56:00 -0300 Subject: [media] s5p-fimc: Fix potential NULL pointer dereference 'fimc' was being dereferenced before the NULL check. Moved it to after the check. Signed-off-by: Sachin Kamat Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index a553702..38ea4d1 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -343,13 +343,14 @@ static int fimc_md_register_sensor_entities(struct fimc_md *fmd) static int fimc_register_callback(struct device *dev, void *p) { struct fimc_dev *fimc = dev_get_drvdata(dev); - struct v4l2_subdev *sd = &fimc->vid_cap.subdev; + struct v4l2_subdev *sd; struct fimc_md *fmd = p; int ret; if (fimc == NULL || fimc->id >= FIMC_MAX_DEVS) return 0; + sd = &fimc->vid_cap.subdev; sd->grp_id = FIMC_GROUP_ID; ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); @@ -367,16 +368,15 @@ static int fimc_register_callback(struct device *dev, void *p) static int fimc_lite_register_callback(struct device *dev, void *p) { struct fimc_lite *fimc = dev_get_drvdata(dev); - struct v4l2_subdev *sd = &fimc->subdev; struct fimc_md *fmd = p; int ret; if (fimc == NULL || fimc->index >= FIMC_LITE_MAX_DEVS) return 0; - sd->grp_id = FLITE_GROUP_ID; + fimc->subdev.grp_id = FLITE_GROUP_ID; - ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); + ret = v4l2_device_register_subdev(&fmd->v4l2_dev, &fimc->subdev); if (ret) { v4l2_err(&fmd->v4l2_dev, "Failed to register FIMC-LITE.%d (%d)\n", -- cgit v0.10.2 From b0f9bf369f34791cf8271be8c610a1e50ead6002 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 8 Oct 2012 08:35:56 -0300 Subject: [media] dvb-frontends: fix potential NULL pointer dereference in stv0900_set_mclk() The dereference should be moved below the NULL test. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/dvb-frontends/stv0900_core.c b/drivers/media/dvb-frontends/stv0900_core.c index 262dfa5..b551ca3 100644 --- a/drivers/media/dvb-frontends/stv0900_core.c +++ b/drivers/media/dvb-frontends/stv0900_core.c @@ -300,15 +300,15 @@ static enum fe_stv0900_error stv0900_set_mclk(struct stv0900_internal *intp, u32 { u32 m_div, clk_sel; - dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk, - intp->quartz); - if (intp == NULL) return STV0900_INVALID_HANDLE; if (intp->errs) return STV0900_I2C_ERROR; + dprintk("%s: Mclk set to %d, Quartz = %d\n", __func__, mclk, + intp->quartz); + clk_sel = ((stv0900_get_bits(intp, F0900_SELX1RATIO) == 1) ? 4 : 6); m_div = ((clk_sel * mclk) / intp->quartz) - 1; stv0900_write_bits(intp, F0900_M_DIV, m_div); -- cgit v0.10.2 From 1fa48cd5c4f1403db1f5a55ea3c346a33f39a33a Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 12 Oct 2012 11:28:40 -0300 Subject: [media] omap3isp: video: Fix warning caused by bad vidioc_s_crop prototype Commit 4f996594 ("v4l2: make vidioc_s_crop const") modified the vidioc_s_crop operation prototype but forgot to update the OMAP3 ISP driver. Add a const keyword to fix the function prototype. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/omap3isp/ispvideo.c b/drivers/media/platform/omap3isp/ispvideo.c index a0b737fe..75cd309 100644 --- a/drivers/media/platform/omap3isp/ispvideo.c +++ b/drivers/media/platform/omap3isp/ispvideo.c @@ -792,7 +792,7 @@ isp_video_get_crop(struct file *file, void *fh, struct v4l2_crop *crop) } static int -isp_video_set_crop(struct file *file, void *fh, struct v4l2_crop *crop) +isp_video_set_crop(struct file *file, void *fh, const struct v4l2_crop *crop) { struct isp_video *video = video_drvdata(file); struct v4l2_subdev *subdev; -- cgit v0.10.2 From 55c8504672adfb8065da5196ce1cce7db97532d0 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Fri, 12 Oct 2012 11:20:10 -0300 Subject: [media] omap3isp: Fix warning caused by bad subdev events operations prototypes Remove the const keyword from the V4L2 subdev events operations to match the V4L2 API. Signed-off-by: Laurent Pinchart Acked-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/omap3isp/ispccdc.c b/drivers/media/platform/omap3isp/ispccdc.c index 60181ab..aa9df9d 100644 --- a/drivers/media/platform/omap3isp/ispccdc.c +++ b/drivers/media/platform/omap3isp/ispccdc.c @@ -1706,7 +1706,7 @@ static long ccdc_ioctl(struct v4l2_subdev *sd, unsigned int cmd, void *arg) } static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { if (sub->type != V4L2_EVENT_FRAME_SYNC) return -EINVAL; @@ -1719,7 +1719,7 @@ static int ccdc_subscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, } static int ccdc_unsubscribe_event(struct v4l2_subdev *sd, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { return v4l2_event_unsubscribe(fh, sub); } diff --git a/drivers/media/platform/omap3isp/ispstat.c b/drivers/media/platform/omap3isp/ispstat.c index d7ac76b..b8640be 100644 --- a/drivers/media/platform/omap3isp/ispstat.c +++ b/drivers/media/platform/omap3isp/ispstat.c @@ -1025,7 +1025,7 @@ void omap3isp_stat_dma_isr(struct ispstat *stat) int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { struct ispstat *stat = v4l2_get_subdevdata(subdev); @@ -1037,7 +1037,7 @@ int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub) + struct v4l2_event_subscription *sub) { return v4l2_event_unsubscribe(fh, sub); } diff --git a/drivers/media/platform/omap3isp/ispstat.h b/drivers/media/platform/omap3isp/ispstat.h index a6fe653..9b7c865 100644 --- a/drivers/media/platform/omap3isp/ispstat.h +++ b/drivers/media/platform/omap3isp/ispstat.h @@ -147,10 +147,10 @@ int omap3isp_stat_init(struct ispstat *stat, const char *name, void omap3isp_stat_cleanup(struct ispstat *stat); int omap3isp_stat_subscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub); + struct v4l2_event_subscription *sub); int omap3isp_stat_unsubscribe_event(struct v4l2_subdev *subdev, struct v4l2_fh *fh, - const struct v4l2_event_subscription *sub); + struct v4l2_event_subscription *sub); int omap3isp_stat_s_stream(struct v4l2_subdev *subdev, int enable); int omap3isp_stat_busy(struct ispstat *stat); -- cgit v0.10.2 From 7de5ae739a3786c9245af50ea0b4a363c6a0310c Mon Sep 17 00:00:00 2001 From: Shaik Ameer Basha Date: Tue, 16 Oct 2012 10:43:44 -0300 Subject: [media] exynos-gsc: change driver compatible string As G-Scaler is going to stay unchanged across all exynos5 series SoCs, changing the driver compatible string name to "samsung,exynos5-gsc" from "samsung,exynos5250-gsc". This change is as per the discussion in the devicetree forum. http://www.mail-archive.com/devicetree-discuss@lists.ozlabs.org/msg16448.html Signed-off-by: Shaik Ameer Basha Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos-gsc/gsc-core.c b/drivers/media/platform/exynos-gsc/gsc-core.c index bfec9e6..19cbb12 100644 --- a/drivers/media/platform/exynos-gsc/gsc-core.c +++ b/drivers/media/platform/exynos-gsc/gsc-core.c @@ -965,8 +965,10 @@ static struct platform_device_id gsc_driver_ids[] = { MODULE_DEVICE_TABLE(platform, gsc_driver_ids); static const struct of_device_id exynos_gsc_match[] = { - { .compatible = "samsung,exynos5250-gsc", - .data = &gsc_v_100_drvdata, }, + { + .compatible = "samsung,exynos5-gsc", + .data = &gsc_v_100_drvdata, + }, {}, }; MODULE_DEVICE_TABLE(of, exynos_gsc_match); -- cgit v0.10.2 From 2c5594df344cd1ff0cc9bf007dea3235582b3acf Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Fri, 26 Oct 2012 11:40:28 +0200 Subject: rcu: Fix unrecovered RCU user mode in syscall_trace_leave() On x86-64 syscall exit, 3 non exclusive events may happen looping in the following order: 1) Check if we need resched for user preemption, if so call schedule_user() 2) Check if we have pending signals, if so call do_notify_resume() 3) Check if we do syscall tracing, if so call syscall_trace_leave() However syscall_trace_leave() has been written assuming it directly follows the syscall and forget about the above possible 1st and 2nd steps. Now schedule_user() and do_notify_resume() exit in RCU user mode because they have most chances to resume userspace immediately and this avoids an rcu_user_enter() call in the syscall fast path. So by the time we call syscall_trace_leave(), we may well be in RCU user mode. To fix this up, simply call rcu_user_exit() in the beginning of this function. This fixes some reported RCU uses in extended quiescent state. Reported-by: Dave Jones Reported-by: Sergey Senozhatsky Signed-off-by: Frederic Weisbecker Tested-by: Sergey Senozhatsky Signed-off-by: Paul E. McKenney diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c index b00b33a..eff5b8c 100644 --- a/arch/x86/kernel/ptrace.c +++ b/arch/x86/kernel/ptrace.c @@ -1511,6 +1511,13 @@ void syscall_trace_leave(struct pt_regs *regs) { bool step; + /* + * We may come here right after calling schedule_user() + * or do_notify_resume(), in which case we can be in RCU + * user mode. + */ + rcu_user_exit(); + audit_syscall_exit(regs); if (unlikely(test_thread_flag(TIF_SYSCALL_TRACEPOINT))) -- cgit v0.10.2 From 0d855354ea351bec6b222e9fea86a876cfafdcb6 Mon Sep 17 00:00:00 2001 From: Michael Neuling Date: Fri, 26 Oct 2012 18:28:56 +0200 Subject: perf, powerpc: Fix hw breakpoints returning -ENOSPC I've been trying to get hardware breakpoints with perf to work on POWER7 but I'm getting the following: % perf record -e mem:0x10000000 true Error: sys_perf_event_open() syscall returned with 28 (No space left on device). /bin/dmesg may provide additional information. Fatal: No CONFIG_PERF_EVENTS=y kernel support configured? true: Terminated (FWIW adding -a and it works fine) Debugging it seems that __reserve_bp_slot() is returning ENOSPC because it thinks there are no free breakpoint slots on this CPU. I have a 2 CPUs, so perf userspace is doing two perf_event_open syscalls to add a counter to each CPU [1]. The first syscall succeeds but the second is failing. On this second syscall, fetch_bp_busy_slots() sets slots.pinned to be 1, despite there being no breakpoint on this CPU. This is because the call the task_bp_pinned, checks all CPUs, rather than just the current CPU. POWER7 only has one hardware breakpoint per CPU (ie. HBP_NUM=1), so we return ENOSPC. The following patch fixes this by checking the associated CPU for each breakpoint in task_bp_pinned. I'm not familiar with this code, so it's provided as a reference to the above issue. Signed-off-by: Michael Neuling Acked-by: Peter Zijlstra Cc: Michael Ellerman Cc: Jovi Zhang Cc: K Prasad Link: http://lkml.kernel.org/r/1351268936-2956-1-git-send-email-fweisbec@gmail.com Signed-off-by: Ingo Molnar diff --git a/kernel/events/hw_breakpoint.c b/kernel/events/hw_breakpoint.c index 9a7b487..fe8a916 100644 --- a/kernel/events/hw_breakpoint.c +++ b/kernel/events/hw_breakpoint.c @@ -111,14 +111,16 @@ static unsigned int max_task_bp_pinned(int cpu, enum bp_type_idx type) * Count the number of breakpoints of the same type and same task. * The given event must be not on the list. */ -static int task_bp_pinned(struct perf_event *bp, enum bp_type_idx type) +static int task_bp_pinned(int cpu, struct perf_event *bp, enum bp_type_idx type) { struct task_struct *tsk = bp->hw.bp_target; struct perf_event *iter; int count = 0; list_for_each_entry(iter, &bp_task_head, hw.bp_list) { - if (iter->hw.bp_target == tsk && find_slot_idx(iter) == type) + if (iter->hw.bp_target == tsk && + find_slot_idx(iter) == type && + cpu == iter->cpu) count += hw_breakpoint_weight(iter); } @@ -141,7 +143,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp, if (!tsk) slots->pinned += max_task_bp_pinned(cpu, type); else - slots->pinned += task_bp_pinned(bp, type); + slots->pinned += task_bp_pinned(cpu, bp, type); slots->flexible = per_cpu(nr_bp_flexible[type], cpu); return; @@ -154,7 +156,7 @@ fetch_bp_busy_slots(struct bp_busy_slots *slots, struct perf_event *bp, if (!tsk) nr += max_task_bp_pinned(cpu, type); else - nr += task_bp_pinned(bp, type); + nr += task_bp_pinned(cpu, bp, type); if (nr > slots->pinned) slots->pinned = nr; @@ -188,7 +190,7 @@ static void toggle_bp_task_slot(struct perf_event *bp, int cpu, bool enable, int old_idx = 0; int idx = 0; - old_count = task_bp_pinned(bp, type); + old_count = task_bp_pinned(cpu, bp, type); old_idx = old_count - 1; idx = old_idx + weight; -- cgit v0.10.2 From 1234471e2d11e4ee47f6de452dd8b8aeb09b45de Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 23 Oct 2012 22:44:49 +0900 Subject: perf header: Fix numa topology printing Andrew reported that the commit 7e94cfcc9d20 ("perf header: Use pre- processed session env when printing") regresses the header output. It was because of a missed string pointer calculation in the loop. Reported-by: Andrew Jones Tested-by: Andrew Jones Signed-off-by: Namhyung Kim Cc: Andrew Jones Link: http://lkml.kernel.org/r/1350999890-6920-1-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index 7daad23..566b84c 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -1378,6 +1378,8 @@ static void print_numa_topology(struct perf_header *ph, int fd __maybe_unused, str = tmp + 1; fprintf(fp, "# node%u cpu list : %s\n", c, str); + + str += strlen(str) + 1; } return; error: -- cgit v0.10.2 From f787d9519fb10411f2948f5b9957a1669879ba84 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Tue, 23 Oct 2012 22:44:50 +0900 Subject: perf tools: Fix strbuf_addf() when the buffer needs to grow This was found during chasing down the header output regression. The strbuf_addf() was checking buffer length with a result of vscnprintf() which cannot be greater than that of strbuf_avail(). Since numa topology and pmu mapping info in header were converted to use strbuf, it sometimes caused uninteresting behaviors with the broken strbuf. Fix it by using vsnprintf() which returns desired output string length regardless of the available buffer size and grow the buffer if needed. Reported-by: Andrew Jones Tested-by: Andrew Jones Signed-off-by: Namhyung Kim Cc: Andrew Jones Link: http://lkml.kernel.org/r/1350999890-6920-2-git-send-email-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/util/strbuf.c b/tools/perf/util/strbuf.c index 2eeb51b..cfa9068 100644 --- a/tools/perf/util/strbuf.c +++ b/tools/perf/util/strbuf.c @@ -90,17 +90,17 @@ void strbuf_addf(struct strbuf *sb, const char *fmt, ...) if (!strbuf_avail(sb)) strbuf_grow(sb, 64); va_start(ap, fmt); - len = vscnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); + len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); va_end(ap); if (len < 0) - die("your vscnprintf is broken"); + die("your vsnprintf is broken"); if (len > strbuf_avail(sb)) { strbuf_grow(sb, len); va_start(ap, fmt); - len = vscnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); + len = vsnprintf(sb->buf + sb->len, sb->alloc - sb->len, fmt, ap); va_end(ap); if (len > strbuf_avail(sb)) { - die("this should not happen, your snprintf is broken"); + die("this should not happen, your vsnprintf is broken"); } } strbuf_setlen(sb, sb->len + len); -- cgit v0.10.2 From c1c92b6a5b606e39e2181ac8eee2a0ca847542dc Mon Sep 17 00:00:00 2001 From: Jesse Gross Date: Tue, 30 Oct 2012 15:48:48 -0700 Subject: openvswitch: Print device when warning about over MTU packets. If an attempt is made to transmit a packet that is over the device's MTU then we log it using the datapath's name. However, it is much more helpful to use the device name instead. Signed-off-by: Jesse Gross diff --git a/net/openvswitch/vport-netdev.c b/net/openvswitch/vport-netdev.c index 3c1e58b..a903348 100644 --- a/net/openvswitch/vport-netdev.c +++ b/net/openvswitch/vport-netdev.c @@ -158,7 +158,7 @@ static int netdev_send(struct vport *vport, struct sk_buff *skb) if (unlikely(packet_length(skb) > mtu && !skb_is_gso(skb))) { net_warn_ratelimited("%s: dropped over-mtu packet: %d > %d\n", - ovs_dp_name(vport->dp), + netdev_vport->dev->name, packet_length(skb), mtu); goto error; } -- cgit v0.10.2 From d04d382980c86bdee9960c3eb157a73f8ed230cc Mon Sep 17 00:00:00 2001 From: Mehak Mahajan Date: Tue, 30 Oct 2012 15:50:28 -0700 Subject: openvswitch: Store flow key len if ARP opcode is not request or reply. We currently only extract the ARP payload if the opcode indicates that it is a request or reply. However, we also only set the key length in these situations even though it should still be possible to match on the opcode. There's no real reason to restrict the ARP opcode since all have the same format so this simply removes the check. Signed-off-by: Mehak Mahajan Signed-off-by: Jesse Gross diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c index 98c7063..733cbf4 100644 --- a/net/openvswitch/flow.c +++ b/net/openvswitch/flow.c @@ -702,15 +702,11 @@ int ovs_flow_extract(struct sk_buff *skb, u16 in_port, struct sw_flow_key *key, /* We only match on the lower 8 bits of the opcode. */ if (ntohs(arp->ar_op) <= 0xff) key->ip.proto = ntohs(arp->ar_op); - - if (key->ip.proto == ARPOP_REQUEST - || key->ip.proto == ARPOP_REPLY) { - memcpy(&key->ipv4.addr.src, arp->ar_sip, sizeof(key->ipv4.addr.src)); - memcpy(&key->ipv4.addr.dst, arp->ar_tip, sizeof(key->ipv4.addr.dst)); - memcpy(key->ipv4.arp.sha, arp->ar_sha, ETH_ALEN); - memcpy(key->ipv4.arp.tha, arp->ar_tha, ETH_ALEN); - key_len = SW_FLOW_KEY_OFFSET(ipv4.arp); - } + memcpy(&key->ipv4.addr.src, arp->ar_sip, sizeof(key->ipv4.addr.src)); + memcpy(&key->ipv4.addr.dst, arp->ar_tip, sizeof(key->ipv4.addr.dst)); + memcpy(key->ipv4.arp.sha, arp->ar_sha, ETH_ALEN); + memcpy(key->ipv4.arp.tha, arp->ar_tha, ETH_ALEN); + key_len = SW_FLOW_KEY_OFFSET(ipv4.arp); } } else if (key->eth.type == htons(ETH_P_IPV6)) { int nh_len; /* IPv6 Header + Extensions */ -- cgit v0.10.2 From 2d9e7ea690d76b95a7eb3fd8eb3823b4f5946050 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 6 Nov 2012 17:23:35 +0100 Subject: [media] dvb_usb_v2: fix pid_filter callback error logging Code block braces were missing which leds broken error logging and compiler warning. drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usb_ctrl_feed': drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:291:12: warning: 'ret' may be used uninitialized in this function [-Wuninitialized] Reported-by: Stephen Rothwell Reported-by: Milan Tuma Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c index 9859d2a..ba51f65 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_core.c @@ -283,14 +283,13 @@ static inline int dvb_usb_ctrl_feed(struct dvb_demux_feed *dvbdmxfeed, /* activate the pid on the device pid filter */ if (adap->props->caps & DVB_USB_ADAP_HAS_PID_FILTER && - adap->pid_filtering && - adap->props->pid_filter) + adap->pid_filtering && adap->props->pid_filter) { ret = adap->props->pid_filter(adap, dvbdmxfeed->index, dvbdmxfeed->pid, (count == 1) ? 1 : 0); - if (ret < 0) - dev_err(&d->udev->dev, "%s: pid_filter() " \ - "failed=%d\n", KBUILD_MODNAME, - ret); + if (ret < 0) + dev_err(&d->udev->dev, "%s: pid_filter() failed=%d\n", + KBUILD_MODNAME, ret); + } /* start feeding if it is first pid */ if (adap->feed_count == 1 && count == 1) { -- cgit v0.10.2 From 6d369a09ccd8104b35646b507112d3ddca4344eb Mon Sep 17 00:00:00 2001 From: David Howells Date: Thu, 8 Nov 2012 11:26:34 +0000 Subject: x86: Export asm/{svm.h,vmx.h,perf_regs.h} Export asm/{svm.h,vmx.h,perf_regs.h} so that they can be disintegrated. It looks from previous commits that the first two should have been exported, but the header-y lines weren't added to the Kbuild. I'm guessing that asm/perf_regs.h should be exported too. Signed-off-by: David Howells diff --git a/arch/x86/include/asm/Kbuild b/arch/x86/include/asm/Kbuild index 66e5f0e..79fd8a3 100644 --- a/arch/x86/include/asm/Kbuild +++ b/arch/x86/include/asm/Kbuild @@ -12,6 +12,7 @@ header-y += mce.h header-y += msr-index.h header-y += msr.h header-y += mtrr.h +header-y += perf_regs.h header-y += posix_types_32.h header-y += posix_types_64.h header-y += posix_types_x32.h @@ -19,8 +20,10 @@ header-y += prctl.h header-y += processor-flags.h header-y += ptrace-abi.h header-y += sigcontext32.h +header-y += svm.h header-y += ucontext.h header-y += vm86.h +header-y += vmx.h header-y += vsyscall.h genhdr-y += unistd_32.h -- cgit v0.10.2 From 41269386b0898b12f82e290604691111a0cdf75b Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Wed, 7 Nov 2012 23:52:52 +0100 Subject: [media] dvb_usb_v2: switch interruptible mutex to normal Fixes error: dvb_usb_v2: pid_filter() failed=-4 error code -4 is EINTR, Interrupted system call That error blocks I/O in some cases as -EINTR error was returned by the mutex which was protecting USB control messages. We want configure hardware to sleep mode on every case after tuning is stopped. That kind of behavior blocks it, leaving hardware some unwanted state in worst case. That error was seen every time when af9015 was plugged to USB1.1 which leads use of hardware PID filters. Stop tuning (tzap) with ctrl+c failed as driver tries to remove hardware PID filters. Tested with every hardware which uses routine in question. Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c index 0431bee..5716662 100644 --- a/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c +++ b/drivers/media/usb/dvb-usb-v2/dvb_usb_urb.c @@ -32,9 +32,7 @@ int dvb_usbv2_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, return -EINVAL; } - ret = mutex_lock_interruptible(&d->usb_mutex); - if (ret < 0) - return ret; + mutex_lock(&d->usb_mutex); dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, wlen, wbuf); -- cgit v0.10.2 From 6722df86ba92cce09fd5348ca23e7042b51d6013 Mon Sep 17 00:00:00 2001 From: Josh Cartwright Date: Sun, 4 Nov 2012 22:03:02 +0100 Subject: ARM: 7570/1: quiet down the non make -s output Commit edc88ceb0c7d285b9f58bc29a638cd8163b59989 silenced the make -s build, but inadvertently made louder the non-silent build. Fix by prepending '@' to each of the added $(kecho) statements. Build with edc88ceb0c7d285b9f58bc29a638cd8163b59989: CHK include/generated/compile.h echo ' Kernel: arch/arm/boot/Image is ready' Kernel: arch/arm/boot/Image is ready LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage echo ' Kernel: arch/arm/boot/zImage is ready' Kernel: arch/arm/boot/zImage is ready Build with this fix: CHK include/generated/compile.h Kernel: arch/arm/boot/Image is ready LD arch/arm/boot/compressed/vmlinux OBJCOPY arch/arm/boot/zImage Kernel: arch/arm/boot/zImage is ready Signed-off-by: Josh Cartwright Signed-off-by: Russell King diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile index f2aa09e..9137df5 100644 --- a/arch/arm/boot/Makefile +++ b/arch/arm/boot/Makefile @@ -33,7 +33,7 @@ ifeq ($(CONFIG_XIP_KERNEL),y) $(obj)/xipImage: vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' + @$(kecho) ' Kernel: $@ is ready (physical address: $(CONFIG_XIP_PHYS_ADDR))' $(obj)/Image $(obj)/zImage: FORCE @echo 'Kernel configured for XIP (CONFIG_XIP_KERNEL=y)' @@ -48,14 +48,14 @@ $(obj)/xipImage: FORCE $(obj)/Image: vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' $(obj)/compressed/vmlinux: $(obj)/Image FORCE $(Q)$(MAKE) $(build)=$(obj)/compressed $@ $(obj)/zImage: $(obj)/compressed/vmlinux FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' endif @@ -90,7 +90,7 @@ fi $(obj)/uImage: $(obj)/zImage FORCE @$(check_for_multiple_loadaddr) $(call if_changed,uimage) - $(kecho) ' Image $@ is ready' + @$(kecho) ' Image $@ is ready' $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(Q)$(MAKE) $(build)=$(obj)/bootp $@ @@ -98,7 +98,7 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE $(obj)/bootpImage: $(obj)/bootp/bootp FORCE $(call if_changed,objcopy) - $(kecho) ' Kernel: $@ is ready' + @$(kecho) ' Kernel: $@ is ready' PHONY += initrd FORCE initrd: diff --git a/arch/arm/tools/Makefile b/arch/arm/tools/Makefile index cd60a81..32d05c8 100644 --- a/arch/arm/tools/Makefile +++ b/arch/arm/tools/Makefile @@ -5,6 +5,6 @@ # include/generated/mach-types.h: $(src)/gen-mach-types $(src)/mach-types - $(kecho) ' Generating $@' + @$(kecho) ' Generating $@' @mkdir -p $(dir $@) $(Q)$(AWK) -f $^ > $@ || { rm -f $@; /bin/false; } -- cgit v0.10.2 From 2b6e204f84cc8e324c5425ea98e378a2aeba3be0 Mon Sep 17 00:00:00 2001 From: Nicolas Pitre Date: Wed, 7 Nov 2012 21:22:08 +0100 Subject: ARM: 7572/1: proc-v6.S: fix comment Signed-off-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/mm/proc-v6.S b/arch/arm/mm/proc-v6.S index 86b8b48..09c5233 100644 --- a/arch/arm/mm/proc-v6.S +++ b/arch/arm/mm/proc-v6.S @@ -89,7 +89,7 @@ ENTRY(cpu_v6_dcache_clean_area) mov pc, lr /* - * cpu_arm926_switch_mm(pgd_phys, tsk) + * cpu_v6_switch_mm(pgd_phys, tsk) * * Set the translation table base pointer to be pgd_phys * -- cgit v0.10.2 From 3ea160b3e8f0de8161861995d9901f61192fc0b0 Mon Sep 17 00:00:00 2001 From: Roland Dreier Date: Fri, 16 Nov 2012 08:06:16 -0800 Subject: target: Fix handling of aborted commands - If we stop processing an already-aborted command in target_execute_cmd(), then we need to complete t_transport_stop_comp to wake up the the TMR handling thread, or else it will end up waiting forever. - If we've a already sent an "aborted" status for a command in transport_check_aborted_status() then we should bail out of transport_send_task_abort() to avoid freeing the command twice. Signed-off-by: Roland Dreier Cc: stable@vger.kernel.org Signed-off-by: Nicholas Bellinger diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 9097155..dcecbfb 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -1819,8 +1819,10 @@ void target_execute_cmd(struct se_cmd *cmd) /* * If the received CDB has aleady been aborted stop processing it here. */ - if (transport_check_aborted_status(cmd, 1)) + if (transport_check_aborted_status(cmd, 1)) { + complete(&cmd->t_transport_stop_comp); return; + } /* * Determine if IOCTL context caller in requesting the stopping of this @@ -3067,7 +3069,7 @@ void transport_send_task_abort(struct se_cmd *cmd) unsigned long flags; spin_lock_irqsave(&cmd->t_state_lock, flags); - if (cmd->se_cmd_flags & SCF_SENT_CHECK_CONDITION) { + if (cmd->se_cmd_flags & (SCF_SENT_CHECK_CONDITION | SCF_SENT_DELAYED_TAS)) { spin_unlock_irqrestore(&cmd->t_state_lock, flags); return; } -- cgit v0.10.2 From ca9dfc6cc45a8ae0297188f5fed23af242cc8a8d Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 5 Nov 2012 15:15:24 +0000 Subject: tools: Define a Makefile function to do subdir processing Define a Makefile function that can be called with $(call ...) to wrap the subdir make invocations in tools/Makefile. This will allow us in the next patch to insert bits in there to honour O= flags when called from the top-level Makefile. Signed-off-by: David Howells Cc: Borislav Petkov Cc: Ingo Molnar Cc: Linus Torvalds Cc: Namhyung Kim Cc: Paul Mackerras Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1378.1352379110@warthog.procyon.org.uk Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/Makefile b/tools/Makefile index 3ae4394..1f9a529 100644 --- a/tools/Makefile +++ b/tools/Makefile @@ -31,44 +31,44 @@ help: @echo ' clean: a summary clean target to clean _all_ folders' cpupower: FORCE - $(QUIET_SUBDIR0)power/$@/ $(QUIET_SUBDIR1) + $(call descend,power/$@) firewire lguest perf usb virtio vm: FORCE - $(QUIET_SUBDIR0)$@/ $(QUIET_SUBDIR1) + $(call descend,$@) selftests: FORCE - $(QUIET_SUBDIR0)testing/$@/ $(QUIET_SUBDIR1) + $(call descend,testing/$@) turbostat x86_energy_perf_policy: FORCE - $(QUIET_SUBDIR0)power/x86/$@/ $(QUIET_SUBDIR1) + $(call descend,power/x86/$@) cpupower_install: - $(QUIET_SUBDIR0)power/$(@:_install=)/ $(QUIET_SUBDIR1) install + $(call descend,power/$(@:_install=),install) firewire_install lguest_install perf_install usb_install virtio_install vm_install: - $(QUIET_SUBDIR0)$(@:_install=)/ $(QUIET_SUBDIR1) install + $(call descend,$(@:_install=),install) selftests_install: - $(QUIET_SUBDIR0)testing/$(@:_clean=)/ $(QUIET_SUBDIR1) install + $(call descend,testing/$(@:_clean=),install) turbostat_install x86_energy_perf_policy_install: - $(QUIET_SUBDIR0)power/x86/$(@:_install=)/ $(QUIET_SUBDIR1) install + $(call descend,power/x86/$(@:_install=),install) install: cpupower_install firewire_install lguest_install perf_install \ selftests_install turbostat_install usb_install virtio_install \ vm_install x86_energy_perf_policy_install cpupower_clean: - $(QUIET_SUBDIR0)power/cpupower/ $(QUIET_SUBDIR1) clean + $(call descend,power/cpupower,clean) firewire_clean lguest_clean perf_clean usb_clean virtio_clean vm_clean: - $(QUIET_SUBDIR0)$(@:_clean=)/ $(QUIET_SUBDIR1) clean + $(call descend,$(@:_clean=),clean) selftests_clean: - $(QUIET_SUBDIR0)testing/$(@:_clean=)/ $(QUIET_SUBDIR1) clean + $(call descend,testing/$(@:_clean=),clean) turbostat_clean x86_energy_perf_policy_clean: - $(QUIET_SUBDIR0)power/x86/$(@:_clean=)/ $(QUIET_SUBDIR1) clean + $(call descend,power/x86/$(@:_clean=),clean) clean: cpupower_clean firewire_clean lguest_clean perf_clean selftests_clean \ turbostat_clean usb_clean virtio_clean vm_clean \ diff --git a/tools/scripts/Makefile.include b/tools/scripts/Makefile.include index 96ce80a..4a9e317 100644 --- a/tools/scripts/Makefile.include +++ b/tools/scripts/Makefile.include @@ -41,6 +41,14 @@ else NO_SUBDIR = : endif +# +# Define a callable command for descending to a new directory +# +# Call by doing: $(call descend,directory[,target]) +# +descend = \ + $(QUIET_SUBDIR0)$(1) $(QUIET_SUBDIR1) $(2) + QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir QUIET_SUBDIR1 = -- cgit v0.10.2 From bf35182ffcd00d8b36d56210ffdac110e5624d7d Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 5 Nov 2012 21:02:08 +0000 Subject: tools: Honour the O= flag when tool build called from a higher Makefile Honour the O= flag that was passed to a higher level Makefile and then passed down as part of a tool build. To make this work, the top-level Makefile passes the original O= flag and subdir=tools to the tools/Makefile, and that in turn passes subdir=$(O)/$(subdir)/foodir when building tool foo in directory $(O)/$(subdir)/foodir (where the intervening slashes aren't added if an element is missing). For example, take perf. This is found in tools/perf/. Assume we're building into directory ~/zebra/, so we pass O=~/zebra to make. Dependening on where we run the build from, we see: make run in dir $(OUTPUT) dir ======================= ================== linux ~/zebra/tools/perf/ linux/tools ~/zebra/perf/ linux/tools/perf ~/zebra/ and if O= is not set, we get: make run in dir $(OUTPUT) dir ======================= ================== linux linux/tools/perf/ linux/tools linux/tools/perf/ linux/tools/perf linux/tools/perf/ The output directories are created by the descend function if they don't already exist. Signed-off-by: David Howells Cc: Borislav Petkov Cc: Ingo Molnar Cc: Linus Torvalds Cc: Namhyung Kim Cc: Paul Mackerras Cc: Thomas Gleixner Link: http://lkml.kernel.org/r/1378.1352379110@warthog.procyon.org.uk Signed-off-by: Arnaldo Carvalho de Melo diff --git a/Makefile b/Makefile index 42d0e56..71dc31e 100644 --- a/Makefile +++ b/Makefile @@ -1321,10 +1321,12 @@ kernelversion: # Clear a bunch of variables before executing the submake tools/: FORCE - $(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ + $(Q)mkdir -p $(objtree)/tools + $(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ tools/%: FORCE - $(Q)$(MAKE) LDFLAGS= MAKEFLAGS= -C $(src)/tools/ $* + $(Q)mkdir -p $(objtree)/tools + $(Q)$(MAKE) LDFLAGS= MAKEFLAGS= O=$(objtree) subdir=tools -C $(src)/tools/ $* # Single targets # --------------------------------------------------------------------------- diff --git a/tools/scripts/Makefile.include b/tools/scripts/Makefile.include index 4a9e317..87467b1 100644 --- a/tools/scripts/Makefile.include +++ b/tools/scripts/Makefile.include @@ -1,8 +1,11 @@ -ifeq ("$(origin O)", "command line") +ifeq ($(origin O), command line) dummy := $(if $(shell test -d $(O) || echo $(O)),$(error O=$(O) does not exist),) ABSOLUTE_O := $(shell cd $(O) ; pwd) - OUTPUT := $(ABSOLUTE_O)/ + OUTPUT := $(ABSOLUTE_O)/$(if $(subdir),$(subdir)/) COMMAND_O := O=$(ABSOLUTE_O) +ifeq ($(objtree),) + objtree := $(O) +endif endif ifneq ($(OUTPUT),) @@ -47,9 +50,10 @@ endif # Call by doing: $(call descend,directory[,target]) # descend = \ - $(QUIET_SUBDIR0)$(1) $(QUIET_SUBDIR1) $(2) + +mkdir -p $(OUTPUT)$(1) && \ + $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) -QUIET_SUBDIR0 = +$(MAKE) -C # space to separate -C and subdir +QUIET_SUBDIR0 = +$(MAKE) $(COMMAND_O) -C # space to separate -C and subdir QUIET_SUBDIR1 = ifneq ($(findstring $(MAKEFLAGS),s),s) @@ -64,5 +68,10 @@ ifndef V $(MAKE) $(PRINT_DIR) -C $$subdir QUIET_FLEX = @echo ' ' FLEX $@; QUIET_BISON = @echo ' ' BISON $@; + + descend = \ + @echo ' ' DESCEND $(1); \ + mkdir -p $(OUTPUT)$(1) && \ + $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) endif endif -- cgit v0.10.2 From 2b73f65d114b44b9bc9bd7d229f603e4cd5c1a88 Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 13 Nov 2012 14:14:38 -0300 Subject: tools: Pass the target in descend MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fixing: [acme@sandy linux]$ cd tools [acme@sandy tools]$ make clean DESCEND power/cpupower CC lib/cpufreq.o CC lib/sysfs.o LD libcpupower.so.0.0.0 CC utils/helpers/amd.o utils/helpers/amd.c:7:21: error: pci/pci.h: No such file or directory In file included from utils/helpers/amd.c:9: ./utils/helpers/helpers.h:137: warning: ‘struct pci_access’ declared inside parameter list ./utils/helpers/helpers.h:137: warning: its scope is only this definition or declaration, which is probably not what you want ./utils/helpers/helpers.h:139: warning: ‘struct pci_access’ declared inside parameter list utils/helpers/amd.c: In function ‘amd_pci_get_num_boost_states’: utils/helpers/amd.c:120: warning: passing argument 1 of ‘pci_slot_func_init’ from incompatible pointer type ./utils/helpers/helpers.h:138: note: expected ‘struct pci_access **’ but argument is of type ‘struct pci_access **’ utils/helpers/amd.c:125: warning: implicit declaration of function ‘pci_read_byte’ utils/helpers/amd.c:132: warning: implicit declaration of function ‘pci_cleanup’ make[1]: *** [utils/helpers/amd.o] Error 1 make: *** [cpupower_clean] Error 2 [acme@sandy tools]$ Reported-by: Arnaldo Carvalho de Melo Signed-off-by: David Howells Cc: Borislav Petkov Cc: Ingo Molnar Cc: Linus Torvalds Cc: Namhyung Kim Cc: Paul Mackerras Cc: Thomas Gleixner Link: http://lkml.kernel.org/n/tip-tviyimq6x6nm77sj5lt4t19f@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/scripts/Makefile.include b/tools/scripts/Makefile.include index 87467b1..2964b96 100644 --- a/tools/scripts/Makefile.include +++ b/tools/scripts/Makefile.include @@ -51,7 +51,7 @@ endif # descend = \ +mkdir -p $(OUTPUT)$(1) && \ - $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) + $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2) QUIET_SUBDIR0 = +$(MAKE) $(COMMAND_O) -C # space to separate -C and subdir QUIET_SUBDIR1 = @@ -72,6 +72,6 @@ ifndef V descend = \ @echo ' ' DESCEND $(1); \ mkdir -p $(OUTPUT)$(1) && \ - $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) + $(MAKE) $(COMMAND_O) subdir=$(if $(subdir),$(subdir)/$(1),$(1)) $(PRINT_DIR) -C $(1) $(2) endif endif -- cgit v0.10.2 From f2d9cae9ea9e0228f6eb4d4c5ab4f548d0270d1a Mon Sep 17 00:00:00 2001 From: Sukadev Bhattiprolu Date: Wed, 31 Oct 2012 11:21:28 -0700 Subject: perf powerpc: Use uapi/unistd.h to fix build error Use the 'unistd.h' from arch/powerpc/include/uapi to build the perf tool. Signed-off-by: Sukadev Bhattiprolu Acked-by: David Howells Cc: Anton Blanchard Cc: Ingo Molnar Cc: Paul Mackerras Cc: Peter Zijlstra Cc: Robert Richter Cc: linuxppc-dev@ozlabs.org Link: http://lkml.kernel.org/r/20121107191818.GA16211@us.ibm.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/perf.h b/tools/perf/perf.h index c50985e..e2ba8f0 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -26,7 +26,7 @@ void get_term_dimensions(struct winsize *ws); #endif #ifdef __powerpc__ -#include "../../arch/powerpc/include/asm/unistd.h" +#include "../../arch/powerpc/include/uapi/asm/unistd.h" #define rmb() asm volatile ("sync" ::: "memory") #define cpu_relax() asm volatile ("" ::: "memory"); #define CPUINFO_PROC "cpu" -- cgit v0.10.2 From d2709c7ce4c513ab7f4ca9a106a930621811f2d3 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 19 Nov 2012 22:21:03 +0000 Subject: perf: Make perf build for x86 with UAPI disintegration applied Make perf build for x86 once the UAPI disintegration patches for that arch have been applied by adding the appropriate -I flags - in the right order - and then converting some #includes that use ../.. notation to find main kernel headerfiles to use and instead. Note that -Iarch/foo/include/uapi is present _before_ -Iarch/foo/include. This makes sure we get the userspace version of the pt_regs struct. Ideally, we wouldn't have the latter -I flag at all, but unfortunately we want asm/svm.h and asm/vmx.h in builtin-kvm.c and these aren't part of the UAPI - at least not for x86. I wonder if the bits outside of the __KERNEL__ guards *should* be transferred there. I note also that perf seems to do its dependency handling manually by listing all the header files it might want to use in LIB_H in the Makefile. Can this be changed to use -MD? Note that to do make this work, we need to export and UAPI disintegrate linux/hw_breakpoint.h, which I think should've been exported previously so that perf can access the bits. We have to do this in the same patch to maintain bisectability. Signed-off-by: David Howells diff --git a/include/linux/hw_breakpoint.h b/include/linux/hw_breakpoint.h index 6ae9c63..0464c85 100644 --- a/include/linux/hw_breakpoint.h +++ b/include/linux/hw_breakpoint.h @@ -1,35 +1,8 @@ #ifndef _LINUX_HW_BREAKPOINT_H #define _LINUX_HW_BREAKPOINT_H -enum { - HW_BREAKPOINT_LEN_1 = 1, - HW_BREAKPOINT_LEN_2 = 2, - HW_BREAKPOINT_LEN_4 = 4, - HW_BREAKPOINT_LEN_8 = 8, -}; - -enum { - HW_BREAKPOINT_EMPTY = 0, - HW_BREAKPOINT_R = 1, - HW_BREAKPOINT_W = 2, - HW_BREAKPOINT_RW = HW_BREAKPOINT_R | HW_BREAKPOINT_W, - HW_BREAKPOINT_X = 4, - HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, -}; - -enum bp_type_idx { - TYPE_INST = 0, -#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS - TYPE_DATA = 0, -#else - TYPE_DATA = 1, -#endif - TYPE_MAX -}; - -#ifdef __KERNEL__ - #include +#include #ifdef CONFIG_HAVE_HW_BREAKPOINT @@ -151,6 +124,4 @@ static inline struct arch_hw_breakpoint *counter_arch_bp(struct perf_event *bp) } #endif /* CONFIG_HAVE_HW_BREAKPOINT */ -#endif /* __KERNEL__ */ - #endif /* _LINUX_HW_BREAKPOINT_H */ diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild index e194387..19e765f 100644 --- a/include/uapi/linux/Kbuild +++ b/include/uapi/linux/Kbuild @@ -415,3 +415,4 @@ header-y += wireless.h header-y += x25.h header-y += xattr.h header-y += xfrm.h +header-y += hw_breakpoint.h diff --git a/include/uapi/linux/hw_breakpoint.h b/include/uapi/linux/hw_breakpoint.h new file mode 100644 index 0000000..b04000a --- /dev/null +++ b/include/uapi/linux/hw_breakpoint.h @@ -0,0 +1,30 @@ +#ifndef _UAPI_LINUX_HW_BREAKPOINT_H +#define _UAPI_LINUX_HW_BREAKPOINT_H + +enum { + HW_BREAKPOINT_LEN_1 = 1, + HW_BREAKPOINT_LEN_2 = 2, + HW_BREAKPOINT_LEN_4 = 4, + HW_BREAKPOINT_LEN_8 = 8, +}; + +enum { + HW_BREAKPOINT_EMPTY = 0, + HW_BREAKPOINT_R = 1, + HW_BREAKPOINT_W = 2, + HW_BREAKPOINT_RW = HW_BREAKPOINT_R | HW_BREAKPOINT_W, + HW_BREAKPOINT_X = 4, + HW_BREAKPOINT_INVALID = HW_BREAKPOINT_RW | HW_BREAKPOINT_X, +}; + +enum bp_type_idx { + TYPE_INST = 0, +#ifdef CONFIG_HAVE_MIXED_BREAKPOINTS_REGS + TYPE_DATA = 0, +#else + TYPE_DATA = 1, +#endif + TYPE_MAX +}; + +#endif /* _UAPI_LINUX_HW_BREAKPOINT_H */ diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 00deed4d..0a619af 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -169,7 +169,34 @@ endif ### --- END CONFIGURATION SECTION --- -BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include -I$(OUTPUT)util -I$(TRACE_EVENT_DIR) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE +ifeq ($(srctree),) +srctree := $(patsubst %/,%,$(dir $(shell pwd))) +srctree := $(patsubst %/,%,$(dir $(srctree))) +#$(info Determined 'srctree' to be $(srctree)) +endif + +ifneq ($(objtree),) +#$(info Determined 'objtree' to be $(objtree)) +endif + +ifneq ($(OUTPUT),) +#$(info Determined 'OUTPUT' to be $(OUTPUT)) +endif + +BASIC_CFLAGS = \ + -Iutil/include \ + -Iarch/$(ARCH)/include \ + $(if $(objtree),-I$(objtree)/arch/$(ARCH)/include/generated/uapi) \ + -I$(srctree)/arch/$(ARCH)/include/uapi \ + -I$(srctree)/arch/$(ARCH)/include \ + $(if $(objtree),-I$(objtree)/include/generated/uapi) \ + -I$(srctree)/include/uapi \ + -I$(srctree)/include \ + -I$(OUTPUT)util \ + -Iutil \ + -I. \ + -I$(TRACE_EVENT_DIR) \ + -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE BASIC_LDFLAGS = # Guard against environment variables diff --git a/tools/perf/arch/x86/include/perf_regs.h b/tools/perf/arch/x86/include/perf_regs.h index 46fc9f1..7fcdcdb 100644 --- a/tools/perf/arch/x86/include/perf_regs.h +++ b/tools/perf/arch/x86/include/perf_regs.h @@ -3,7 +3,7 @@ #include #include "../../util/types.h" -#include "../../../../../arch/x86/include/asm/perf_regs.h" +#include #ifndef ARCH_X86_64 #define PERF_REGS_MASK ((1ULL << PERF_REG_X86_32_MAX) - 1) diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c index 260abc5..e013bdb 100644 --- a/tools/perf/builtin-kvm.c +++ b/tools/perf/builtin-kvm.c @@ -22,9 +22,9 @@ #include #include -#include "../../arch/x86/include/asm/svm.h" -#include "../../arch/x86/include/asm/vmx.h" -#include "../../arch/x86/include/asm/kvm.h" +#include +#include +#include struct event_key { #define INVALID_KEY (~0ULL) diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index 484f26c..5acd6e8 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -15,7 +15,7 @@ #include "util/thread_map.h" #include "util/pmu.h" #include "event-parse.h" -#include "../../include/linux/hw_breakpoint.h" +#include #include diff --git a/tools/perf/perf.h b/tools/perf/perf.h index e2ba8f0..238f923 100644 --- a/tools/perf/perf.h +++ b/tools/perf/perf.h @@ -5,8 +5,9 @@ struct winsize; void get_term_dimensions(struct winsize *ws); +#include + #if defined(__i386__) -#include "../../arch/x86/include/asm/unistd.h" #define rmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory") #define cpu_relax() asm volatile("rep; nop" ::: "memory"); #define CPUINFO_PROC "model name" @@ -16,7 +17,6 @@ void get_term_dimensions(struct winsize *ws); #endif #if defined(__x86_64__) -#include "../../arch/x86/include/asm/unistd.h" #define rmb() asm volatile("lfence" ::: "memory") #define cpu_relax() asm volatile("rep; nop" ::: "memory"); #define CPUINFO_PROC "model name" @@ -26,20 +26,17 @@ void get_term_dimensions(struct winsize *ws); #endif #ifdef __powerpc__ -#include "../../arch/powerpc/include/uapi/asm/unistd.h" #define rmb() asm volatile ("sync" ::: "memory") #define cpu_relax() asm volatile ("" ::: "memory"); #define CPUINFO_PROC "cpu" #endif #ifdef __s390__ -#include "../../arch/s390/include/asm/unistd.h" #define rmb() asm volatile("bcr 15,0" ::: "memory") #define cpu_relax() asm volatile("" ::: "memory"); #endif #ifdef __sh__ -#include "../../arch/sh/include/asm/unistd.h" #if defined(__SH4A__) || defined(__SH5__) # define rmb() asm volatile("synco" ::: "memory") #else @@ -50,35 +47,30 @@ void get_term_dimensions(struct winsize *ws); #endif #ifdef __hppa__ -#include "../../arch/parisc/include/asm/unistd.h" #define rmb() asm volatile("" ::: "memory") #define cpu_relax() asm volatile("" ::: "memory"); #define CPUINFO_PROC "cpu" #endif #ifdef __sparc__ -#include "../../arch/sparc/include/uapi/asm/unistd.h" #define rmb() asm volatile("":::"memory") #define cpu_relax() asm volatile("":::"memory") #define CPUINFO_PROC "cpu" #endif #ifdef __alpha__ -#include "../../arch/alpha/include/asm/unistd.h" #define rmb() asm volatile("mb" ::: "memory") #define cpu_relax() asm volatile("" ::: "memory") #define CPUINFO_PROC "cpu model" #endif #ifdef __ia64__ -#include "../../arch/ia64/include/asm/unistd.h" #define rmb() asm volatile ("mf" ::: "memory") #define cpu_relax() asm volatile ("hint @pause" ::: "memory") #define CPUINFO_PROC "model name" #endif #ifdef __arm__ -#include "../../arch/arm/include/asm/unistd.h" /* * Use the __kuser_memory_barrier helper in the CPU helper page. See * arch/arm/kernel/entry-armv.S in the kernel source for details. @@ -89,13 +81,11 @@ void get_term_dimensions(struct winsize *ws); #endif #ifdef __aarch64__ -#include "../../arch/arm64/include/asm/unistd.h" #define rmb() asm volatile("dmb ld" ::: "memory") #define cpu_relax() asm volatile("yield" ::: "memory") #endif #ifdef __mips__ -#include "../../arch/mips/include/asm/unistd.h" #define rmb() asm volatile( \ ".set mips2\n\t" \ "sync\n\t" \ @@ -112,7 +102,7 @@ void get_term_dimensions(struct winsize *ws); #include #include -#include "../../include/uapi/linux/perf_event.h" +#include #include "util/types.h" #include diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index 618d411..d144d46 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -18,8 +18,8 @@ #include "cpumap.h" #include "thread_map.h" #include "target.h" -#include "../../../include/linux/hw_breakpoint.h" -#include "../../../include/uapi/linux/perf_event.h" +#include +#include #include "perf_regs.h" #define FD(e, x, y) (*(int *)xyarray__entry(e->fd, x, y)) diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h index 6f94d6d..d99b476 100644 --- a/tools/perf/util/evsel.h +++ b/tools/perf/util/evsel.h @@ -3,7 +3,8 @@ #include #include -#include "../../../include/uapi/linux/perf_event.h" +#include +#include #include "types.h" #include "xyarray.h" #include "cgroup.h" diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h index 879d215..9bc0078 100644 --- a/tools/perf/util/header.h +++ b/tools/perf/util/header.h @@ -1,7 +1,7 @@ #ifndef __PERF_HEADER_H #define __PERF_HEADER_H -#include "../../../include/uapi/linux/perf_event.h" +#include #include #include #include "types.h" diff --git a/tools/perf/util/parse-events-test.c b/tools/perf/util/parse-events-test.c index 516ecd9..6ef213b 100644 --- a/tools/perf/util/parse-events-test.c +++ b/tools/perf/util/parse-events-test.c @@ -3,7 +3,7 @@ #include "evsel.h" #include "evlist.h" #include "sysfs.h" -#include "../../../include/linux/hw_breakpoint.h" +#include #define TEST_ASSERT_VAL(text, cond) \ do { \ diff --git a/tools/perf/util/parse-events.c b/tools/perf/util/parse-events.c index 75c7b0f..6b6d03e 100644 --- a/tools/perf/util/parse-events.c +++ b/tools/perf/util/parse-events.c @@ -1,4 +1,4 @@ -#include "../../../include/linux/hw_breakpoint.h" +#include #include "util.h" #include "../perf.h" #include "evlist.h" diff --git a/tools/perf/util/parse-events.h b/tools/perf/util/parse-events.h index 839230c..2820c40 100644 --- a/tools/perf/util/parse-events.h +++ b/tools/perf/util/parse-events.h @@ -7,7 +7,7 @@ #include #include #include "types.h" -#include "../../../include/uapi/linux/perf_event.h" +#include #include "types.h" struct list_head; diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h index 39f3aba..fdeb8ac 100644 --- a/tools/perf/util/pmu.h +++ b/tools/perf/util/pmu.h @@ -2,7 +2,7 @@ #define __PMU_H #include -#include "../../../include/uapi/linux/perf_event.h" +#include enum { PERF_PMU_FORMAT_VALUE_CONFIG, diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index dd64261..0eae00a 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -7,7 +7,7 @@ #include "symbol.h" #include "thread.h" #include -#include "../../../include/uapi/linux/perf_event.h" +#include struct sample_queue; struct ip_callchain; -- cgit v0.10.2 From 78a3c5ab1749cb78eb06b581c3c13d8e027bef40 Mon Sep 17 00:00:00 2001 From: Peter Ujfalusi Date: Wed, 31 Oct 2012 15:54:37 +0100 Subject: mfd: twl-core: Fix chip ID for the twl6030-pwm module The correct chip id is 1 since the PWM module is on address 0x49. With the current TWL6030_MODULE_ID1 the kernel will crash early since we have: #define TWL6030_MODULE_ID1 0x0E and static struct twl_client twl_modules[4]; Down in the stack we try to get the module by: struct twl_client *twl = &twl_modules[chip]; Which is obviously going to do nasty things. Signed-off-by: Peter Ujfalusi Acked-by: Tero Kristo Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/twl-core.c b/drivers/mfd/twl-core.c index 4ae6423..a071a86 100644 --- a/drivers/mfd/twl-core.c +++ b/drivers/mfd/twl-core.c @@ -671,7 +671,7 @@ add_children(struct twl4030_platform_data *pdata, unsigned irq_base, } if (IS_ENABLED(CONFIG_PWM_TWL6030) && twl_class_is_6030()) { - child = add_child(TWL6030_MODULE_ID1, "twl6030-pwm", NULL, 0, + child = add_child(SUB_CHIP_ID1, "twl6030-pwm", NULL, 0, false, 0, 0); if (IS_ERR(child)) return PTR_ERR(child); -- cgit v0.10.2 From d591ad8dcf32b8a71b63041d22a46dd8caf05041 Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 20 Nov 2012 13:46:17 +0900 Subject: mfd: wm5102: Update register patch for latest evaluation Latest evaluation of the device has provided some revisions to the configuration. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/wm5102-tables.c b/drivers/mfd/wm5102-tables.c index 01b9255..14490cc 100644 --- a/drivers/mfd/wm5102-tables.c +++ b/drivers/mfd/wm5102-tables.c @@ -43,6 +43,7 @@ static const struct reg_default wm5102_reva_patch[] = { { 0x479, 0x0A30 }, { 0x47B, 0x0810 }, { 0x47D, 0x0510 }, + { 0x4D1, 0x017F }, { 0x500, 0x000D }, { 0x507, 0x1820 }, { 0x508, 0x1820 }, @@ -52,524 +53,6 @@ static const struct reg_default wm5102_reva_patch[] = { { 0x580, 0x000D }, { 0x587, 0x1820 }, { 0x588, 0x1820 }, - { 0x101, 0x8140 }, - { 0x3000, 0x2225 }, - { 0x3001, 0x3a03 }, - { 0x3002, 0x0225 }, - { 0x3003, 0x0801 }, - { 0x3004, 0x6249 }, - { 0x3005, 0x0c04 }, - { 0x3006, 0x0225 }, - { 0x3007, 0x5901 }, - { 0x3008, 0xe249 }, - { 0x3009, 0x030d }, - { 0x300a, 0x0249 }, - { 0x300b, 0x2c01 }, - { 0x300c, 0xe249 }, - { 0x300d, 0x4342 }, - { 0x300e, 0xe249 }, - { 0x300f, 0x73c0 }, - { 0x3010, 0x4249 }, - { 0x3011, 0x0c00 }, - { 0x3012, 0x0225 }, - { 0x3013, 0x1f01 }, - { 0x3014, 0x0225 }, - { 0x3015, 0x1e01 }, - { 0x3016, 0x0225 }, - { 0x3017, 0xfa00 }, - { 0x3018, 0x0000 }, - { 0x3019, 0xf000 }, - { 0x301a, 0x0000 }, - { 0x301b, 0xf000 }, - { 0x301c, 0x0000 }, - { 0x301d, 0xf000 }, - { 0x301e, 0x0000 }, - { 0x301f, 0xf000 }, - { 0x3020, 0x0000 }, - { 0x3021, 0xf000 }, - { 0x3022, 0x0000 }, - { 0x3023, 0xf000 }, - { 0x3024, 0x0000 }, - { 0x3025, 0xf000 }, - { 0x3026, 0x0000 }, - { 0x3027, 0xf000 }, - { 0x3028, 0x0000 }, - { 0x3029, 0xf000 }, - { 0x302a, 0x0000 }, - { 0x302b, 0xf000 }, - { 0x302c, 0x0000 }, - { 0x302d, 0xf000 }, - { 0x302e, 0x0000 }, - { 0x302f, 0xf000 }, - { 0x3030, 0x0225 }, - { 0x3031, 0x1a01 }, - { 0x3032, 0x0225 }, - { 0x3033, 0x1e00 }, - { 0x3034, 0x0225 }, - { 0x3035, 0x1f00 }, - { 0x3036, 0x6225 }, - { 0x3037, 0xf800 }, - { 0x3038, 0x0000 }, - { 0x3039, 0xf000 }, - { 0x303a, 0x0000 }, - { 0x303b, 0xf000 }, - { 0x303c, 0x0000 }, - { 0x303d, 0xf000 }, - { 0x303e, 0x0000 }, - { 0x303f, 0xf000 }, - { 0x3040, 0x2226 }, - { 0x3041, 0x3a03 }, - { 0x3042, 0x0226 }, - { 0x3043, 0x0801 }, - { 0x3044, 0x6249 }, - { 0x3045, 0x0c06 }, - { 0x3046, 0x0226 }, - { 0x3047, 0x5901 }, - { 0x3048, 0xe249 }, - { 0x3049, 0x030d }, - { 0x304a, 0x0249 }, - { 0x304b, 0x2c01 }, - { 0x304c, 0xe249 }, - { 0x304d, 0x4342 }, - { 0x304e, 0xe249 }, - { 0x304f, 0x73c0 }, - { 0x3050, 0x4249 }, - { 0x3051, 0x0c00 }, - { 0x3052, 0x0226 }, - { 0x3053, 0x1f01 }, - { 0x3054, 0x0226 }, - { 0x3055, 0x1e01 }, - { 0x3056, 0x0226 }, - { 0x3057, 0xfa00 }, - { 0x3058, 0x0000 }, - { 0x3059, 0xf000 }, - { 0x305a, 0x0000 }, - { 0x305b, 0xf000 }, - { 0x305c, 0x0000 }, - { 0x305d, 0xf000 }, - { 0x305e, 0x0000 }, - { 0x305f, 0xf000 }, - { 0x3060, 0x0000 }, - { 0x3061, 0xf000 }, - { 0x3062, 0x0000 }, - { 0x3063, 0xf000 }, - { 0x3064, 0x0000 }, - { 0x3065, 0xf000 }, - { 0x3066, 0x0000 }, - { 0x3067, 0xf000 }, - { 0x3068, 0x0000 }, - { 0x3069, 0xf000 }, - { 0x306a, 0x0000 }, - { 0x306b, 0xf000 }, - { 0x306c, 0x0000 }, - { 0x306d, 0xf000 }, - { 0x306e, 0x0000 }, - { 0x306f, 0xf000 }, - { 0x3070, 0x0226 }, - { 0x3071, 0x1a01 }, - { 0x3072, 0x0226 }, - { 0x3073, 0x1e00 }, - { 0x3074, 0x0226 }, - { 0x3075, 0x1f00 }, - { 0x3076, 0x6226 }, - { 0x3077, 0xf800 }, - { 0x3078, 0x0000 }, - { 0x3079, 0xf000 }, - { 0x307a, 0x0000 }, - { 0x307b, 0xf000 }, - { 0x307c, 0x0000 }, - { 0x307d, 0xf000 }, - { 0x307e, 0x0000 }, - { 0x307f, 0xf000 }, - { 0x3080, 0x2227 }, - { 0x3081, 0x3a03 }, - { 0x3082, 0x0227 }, - { 0x3083, 0x0801 }, - { 0x3084, 0x6255 }, - { 0x3085, 0x0c04 }, - { 0x3086, 0x0227 }, - { 0x3087, 0x5901 }, - { 0x3088, 0xe255 }, - { 0x3089, 0x030d }, - { 0x308a, 0x0255 }, - { 0x308b, 0x2c01 }, - { 0x308c, 0xe255 }, - { 0x308d, 0x4342 }, - { 0x308e, 0xe255 }, - { 0x308f, 0x73c0 }, - { 0x3090, 0x4255 }, - { 0x3091, 0x0c00 }, - { 0x3092, 0x0227 }, - { 0x3093, 0x1f01 }, - { 0x3094, 0x0227 }, - { 0x3095, 0x1e01 }, - { 0x3096, 0x0227 }, - { 0x3097, 0xfa00 }, - { 0x3098, 0x0000 }, - { 0x3099, 0xf000 }, - { 0x309a, 0x0000 }, - { 0x309b, 0xf000 }, - { 0x309c, 0x0000 }, - { 0x309d, 0xf000 }, - { 0x309e, 0x0000 }, - { 0x309f, 0xf000 }, - { 0x30a0, 0x0000 }, - { 0x30a1, 0xf000 }, - { 0x30a2, 0x0000 }, - { 0x30a3, 0xf000 }, - { 0x30a4, 0x0000 }, - { 0x30a5, 0xf000 }, - { 0x30a6, 0x0000 }, - { 0x30a7, 0xf000 }, - { 0x30a8, 0x0000 }, - { 0x30a9, 0xf000 }, - { 0x30aa, 0x0000 }, - { 0x30ab, 0xf000 }, - { 0x30ac, 0x0000 }, - { 0x30ad, 0xf000 }, - { 0x30ae, 0x0000 }, - { 0x30af, 0xf000 }, - { 0x30b0, 0x0227 }, - { 0x30b1, 0x1a01 }, - { 0x30b2, 0x0227 }, - { 0x30b3, 0x1e00 }, - { 0x30b4, 0x0227 }, - { 0x30b5, 0x1f00 }, - { 0x30b6, 0x6227 }, - { 0x30b7, 0xf800 }, - { 0x30b8, 0x0000 }, - { 0x30b9, 0xf000 }, - { 0x30ba, 0x0000 }, - { 0x30bb, 0xf000 }, - { 0x30bc, 0x0000 }, - { 0x30bd, 0xf000 }, - { 0x30be, 0x0000 }, - { 0x30bf, 0xf000 }, - { 0x30c0, 0x2228 }, - { 0x30c1, 0x3a03 }, - { 0x30c2, 0x0228 }, - { 0x30c3, 0x0801 }, - { 0x30c4, 0x6255 }, - { 0x30c5, 0x0c06 }, - { 0x30c6, 0x0228 }, - { 0x30c7, 0x5901 }, - { 0x30c8, 0xe255 }, - { 0x30c9, 0x030d }, - { 0x30ca, 0x0255 }, - { 0x30cb, 0x2c01 }, - { 0x30cc, 0xe255 }, - { 0x30cd, 0x4342 }, - { 0x30ce, 0xe255 }, - { 0x30cf, 0x73c0 }, - { 0x30d0, 0x4255 }, - { 0x30d1, 0x0c00 }, - { 0x30d2, 0x0228 }, - { 0x30d3, 0x1f01 }, - { 0x30d4, 0x0228 }, - { 0x30d5, 0x1e01 }, - { 0x30d6, 0x0228 }, - { 0x30d7, 0xfa00 }, - { 0x30d8, 0x0000 }, - { 0x30d9, 0xf000 }, - { 0x30da, 0x0000 }, - { 0x30db, 0xf000 }, - { 0x30dc, 0x0000 }, - { 0x30dd, 0xf000 }, - { 0x30de, 0x0000 }, - { 0x30df, 0xf000 }, - { 0x30e0, 0x0000 }, - { 0x30e1, 0xf000 }, - { 0x30e2, 0x0000 }, - { 0x30e3, 0xf000 }, - { 0x30e4, 0x0000 }, - { 0x30e5, 0xf000 }, - { 0x30e6, 0x0000 }, - { 0x30e7, 0xf000 }, - { 0x30e8, 0x0000 }, - { 0x30e9, 0xf000 }, - { 0x30ea, 0x0000 }, - { 0x30eb, 0xf000 }, - { 0x30ec, 0x0000 }, - { 0x30ed, 0xf000 }, - { 0x30ee, 0x0000 }, - { 0x30ef, 0xf000 }, - { 0x30f0, 0x0228 }, - { 0x30f1, 0x1a01 }, - { 0x30f2, 0x0228 }, - { 0x30f3, 0x1e00 }, - { 0x30f4, 0x0228 }, - { 0x30f5, 0x1f00 }, - { 0x30f6, 0x6228 }, - { 0x30f7, 0xf800 }, - { 0x30f8, 0x0000 }, - { 0x30f9, 0xf000 }, - { 0x30fa, 0x0000 }, - { 0x30fb, 0xf000 }, - { 0x30fc, 0x0000 }, - { 0x30fd, 0xf000 }, - { 0x30fe, 0x0000 }, - { 0x30ff, 0xf000 }, - { 0x3100, 0x222b }, - { 0x3101, 0x3a03 }, - { 0x3102, 0x222b }, - { 0x3103, 0x5803 }, - { 0x3104, 0xe26f }, - { 0x3105, 0x030d }, - { 0x3106, 0x626f }, - { 0x3107, 0x2c01 }, - { 0x3108, 0xe26f }, - { 0x3109, 0x4342 }, - { 0x310a, 0xe26f }, - { 0x310b, 0x73c0 }, - { 0x310c, 0x026f }, - { 0x310d, 0x0c00 }, - { 0x310e, 0x022b }, - { 0x310f, 0x1f01 }, - { 0x3110, 0x022b }, - { 0x3111, 0x1e01 }, - { 0x3112, 0x022b }, - { 0x3113, 0xfa00 }, - { 0x3114, 0x0000 }, - { 0x3115, 0xf000 }, - { 0x3116, 0x0000 }, - { 0x3117, 0xf000 }, - { 0x3118, 0x0000 }, - { 0x3119, 0xf000 }, - { 0x311a, 0x0000 }, - { 0x311b, 0xf000 }, - { 0x311c, 0x0000 }, - { 0x311d, 0xf000 }, - { 0x311e, 0x0000 }, - { 0x311f, 0xf000 }, - { 0x3120, 0x022b }, - { 0x3121, 0x0a01 }, - { 0x3122, 0x022b }, - { 0x3123, 0x1e00 }, - { 0x3124, 0x022b }, - { 0x3125, 0x1f00 }, - { 0x3126, 0x622b }, - { 0x3127, 0xf800 }, - { 0x3128, 0x0000 }, - { 0x3129, 0xf000 }, - { 0x312a, 0x0000 }, - { 0x312b, 0xf000 }, - { 0x312c, 0x0000 }, - { 0x312d, 0xf000 }, - { 0x312e, 0x0000 }, - { 0x312f, 0xf000 }, - { 0x3130, 0x0000 }, - { 0x3131, 0xf000 }, - { 0x3132, 0x0000 }, - { 0x3133, 0xf000 }, - { 0x3134, 0x0000 }, - { 0x3135, 0xf000 }, - { 0x3136, 0x0000 }, - { 0x3137, 0xf000 }, - { 0x3138, 0x0000 }, - { 0x3139, 0xf000 }, - { 0x313a, 0x0000 }, - { 0x313b, 0xf000 }, - { 0x313c, 0x0000 }, - { 0x313d, 0xf000 }, - { 0x313e, 0x0000 }, - { 0x313f, 0xf000 }, - { 0x3140, 0x0000 }, - { 0x3141, 0xf000 }, - { 0x3142, 0x0000 }, - { 0x3143, 0xf000 }, - { 0x3144, 0x0000 }, - { 0x3145, 0xf000 }, - { 0x3146, 0x0000 }, - { 0x3147, 0xf000 }, - { 0x3148, 0x0000 }, - { 0x3149, 0xf000 }, - { 0x314a, 0x0000 }, - { 0x314b, 0xf000 }, - { 0x314c, 0x0000 }, - { 0x314d, 0xf000 }, - { 0x314e, 0x0000 }, - { 0x314f, 0xf000 }, - { 0x3150, 0x0000 }, - { 0x3151, 0xf000 }, - { 0x3152, 0x0000 }, - { 0x3153, 0xf000 }, - { 0x3154, 0x0000 }, - { 0x3155, 0xf000 }, - { 0x3156, 0x0000 }, - { 0x3157, 0xf000 }, - { 0x3158, 0x0000 }, - { 0x3159, 0xf000 }, - { 0x315a, 0x0000 }, - { 0x315b, 0xf000 }, - { 0x315c, 0x0000 }, - { 0x315d, 0xf000 }, - { 0x315e, 0x0000 }, - { 0x315f, 0xf000 }, - { 0x3160, 0x0000 }, - { 0x3161, 0xf000 }, - { 0x3162, 0x0000 }, - { 0x3163, 0xf000 }, - { 0x3164, 0x0000 }, - { 0x3165, 0xf000 }, - { 0x3166, 0x0000 }, - { 0x3167, 0xf000 }, - { 0x3168, 0x0000 }, - { 0x3169, 0xf000 }, - { 0x316a, 0x0000 }, - { 0x316b, 0xf000 }, - { 0x316c, 0x0000 }, - { 0x316d, 0xf000 }, - { 0x316e, 0x0000 }, - { 0x316f, 0xf000 }, - { 0x3170, 0x0000 }, - { 0x3171, 0xf000 }, - { 0x3172, 0x0000 }, - { 0x3173, 0xf000 }, - { 0x3174, 0x0000 }, - { 0x3175, 0xf000 }, - { 0x3176, 0x0000 }, - { 0x3177, 0xf000 }, - { 0x3178, 0x0000 }, - { 0x3179, 0xf000 }, - { 0x317a, 0x0000 }, - { 0x317b, 0xf000 }, - { 0x317c, 0x0000 }, - { 0x317d, 0xf000 }, - { 0x317e, 0x0000 }, - { 0x317f, 0xf000 }, - { 0x3180, 0x2001 }, - { 0x3181, 0xf101 }, - { 0x3182, 0x0000 }, - { 0x3183, 0xf000 }, - { 0x3184, 0x0000 }, - { 0x3185, 0xf000 }, - { 0x3186, 0x0000 }, - { 0x3187, 0xf000 }, - { 0x3188, 0x0000 }, - { 0x3189, 0xf000 }, - { 0x318a, 0x0000 }, - { 0x318b, 0xf000 }, - { 0x318c, 0x0000 }, - { 0x318d, 0xf000 }, - { 0x318e, 0x0000 }, - { 0x318f, 0xf000 }, - { 0x3190, 0x0000 }, - { 0x3191, 0xf000 }, - { 0x3192, 0x0000 }, - { 0x3193, 0xf000 }, - { 0x3194, 0x0000 }, - { 0x3195, 0xf000 }, - { 0x3196, 0x0000 }, - { 0x3197, 0xf000 }, - { 0x3198, 0x0000 }, - { 0x3199, 0xf000 }, - { 0x319a, 0x0000 }, - { 0x319b, 0xf000 }, - { 0x319c, 0x0000 }, - { 0x319d, 0xf000 }, - { 0x319e, 0x0000 }, - { 0x319f, 0xf000 }, - { 0x31a0, 0x0000 }, - { 0x31a1, 0xf000 }, - { 0x31a2, 0x0000 }, - { 0x31a3, 0xf000 }, - { 0x31a4, 0x0000 }, - { 0x31a5, 0xf000 }, - { 0x31a6, 0x0000 }, - { 0x31a7, 0xf000 }, - { 0x31a8, 0x0000 }, - { 0x31a9, 0xf000 }, - { 0x31aa, 0x0000 }, - { 0x31ab, 0xf000 }, - { 0x31ac, 0x0000 }, - { 0x31ad, 0xf000 }, - { 0x31ae, 0x0000 }, - { 0x31af, 0xf000 }, - { 0x31b0, 0x0000 }, - { 0x31b1, 0xf000 }, - { 0x31b2, 0x0000 }, - { 0x31b3, 0xf000 }, - { 0x31b4, 0x0000 }, - { 0x31b5, 0xf000 }, - { 0x31b6, 0x0000 }, - { 0x31b7, 0xf000 }, - { 0x31b8, 0x0000 }, - { 0x31b9, 0xf000 }, - { 0x31ba, 0x0000 }, - { 0x31bb, 0xf000 }, - { 0x31bc, 0x0000 }, - { 0x31bd, 0xf000 }, - { 0x31be, 0x0000 }, - { 0x31bf, 0xf000 }, - { 0x31c0, 0x0000 }, - { 0x31c1, 0xf000 }, - { 0x31c2, 0x0000 }, - { 0x31c3, 0xf000 }, - { 0x31c4, 0x0000 }, - { 0x31c5, 0xf000 }, - { 0x31c6, 0x0000 }, - { 0x31c7, 0xf000 }, - { 0x31c8, 0x0000 }, - { 0x31c9, 0xf000 }, - { 0x31ca, 0x0000 }, - { 0x31cb, 0xf000 }, - { 0x31cc, 0x0000 }, - { 0x31cd, 0xf000 }, - { 0x31ce, 0x0000 }, - { 0x31cf, 0xf000 }, - { 0x31d0, 0x0000 }, - { 0x31d1, 0xf000 }, - { 0x31d2, 0x0000 }, - { 0x31d3, 0xf000 }, - { 0x31d4, 0x0000 }, - { 0x31d5, 0xf000 }, - { 0x31d6, 0x0000 }, - { 0x31d7, 0xf000 }, - { 0x31d8, 0x0000 }, - { 0x31d9, 0xf000 }, - { 0x31da, 0x0000 }, - { 0x31db, 0xf000 }, - { 0x31dc, 0x0000 }, - { 0x31dd, 0xf000 }, - { 0x31de, 0x0000 }, - { 0x31df, 0xf000 }, - { 0x31e0, 0x0000 }, - { 0x31e1, 0xf000 }, - { 0x31e2, 0x0000 }, - { 0x31e3, 0xf000 }, - { 0x31e4, 0x0000 }, - { 0x31e5, 0xf000 }, - { 0x31e6, 0x0000 }, - { 0x31e7, 0xf000 }, - { 0x31e8, 0x0000 }, - { 0x31e9, 0xf000 }, - { 0x31ea, 0x0000 }, - { 0x31eb, 0xf000 }, - { 0x31ec, 0x0000 }, - { 0x31ed, 0xf000 }, - { 0x31ee, 0x0000 }, - { 0x31ef, 0xf000 }, - { 0x31f0, 0x0000 }, - { 0x31f1, 0xf000 }, - { 0x31f2, 0x0000 }, - { 0x31f3, 0xf000 }, - { 0x31f4, 0x0000 }, - { 0x31f5, 0xf000 }, - { 0x31f6, 0x0000 }, - { 0x31f7, 0xf000 }, - { 0x31f8, 0x0000 }, - { 0x31f9, 0xf000 }, - { 0x31fa, 0x0000 }, - { 0x31fb, 0xf000 }, - { 0x31fc, 0x0000 }, - { 0x31fd, 0xf000 }, - { 0x31fe, 0x0000 }, - { 0x31ff, 0xf000 }, - { 0x024d, 0xff50 }, - { 0x0252, 0xff50 }, - { 0x0259, 0x0112 }, - { 0x025e, 0x0112 }, - { 0x101, 0x0304 }, { 0x80, 0x0000 }, }; -- cgit v0.10.2 From 944b058258da8a40c13300f374dbfc2617a9190d Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Tue, 20 Nov 2012 13:46:18 +0900 Subject: mfd: wm5110: Disable control interface error report for WM5110 rev B It can misreport. Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/arizona-irq.c b/drivers/mfd/arizona-irq.c index ef0f2d0..b1b0091 100644 --- a/drivers/mfd/arizona-irq.c +++ b/drivers/mfd/arizona-irq.c @@ -178,6 +178,7 @@ int arizona_irq_init(struct arizona *arizona) switch (arizona->rev) { case 0: + case 1: ctrlif_error = false; break; default: -- cgit v0.10.2 From 78566afd8647654b2fb11c3ae13b3d8fe96a8cfe Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 20 Nov 2012 13:46:19 +0900 Subject: mfd: arizona: Use correct array for ARRAY_SIZE in mfd_add_devices call wm5102_devs array was used for ARRAY_SIZE whilst adding the wm5110 devices. This change corrects this to get the size from the wm5110_devs array. As both arrays are the same size no issues should have been caused by this bug. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 1b48f20..166254b 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -520,7 +520,7 @@ int __devinit arizona_dev_init(struct arizona *arizona) break; case WM5110: ret = mfd_add_devices(arizona->dev, -1, wm5110_devs, - ARRAY_SIZE(wm5102_devs), NULL, 0, NULL); + ARRAY_SIZE(wm5110_devs), NULL, 0, NULL); break; } -- cgit v0.10.2 From 3ebef34d5cf658752d000001d2a6a5defe8cf3a9 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 20 Nov 2012 13:46:20 +0900 Subject: mfd: arizona: Correctly report when AIF2/AIF1 is underclocked In the interrupt handler for an underclocked event, whilst checking for the source of the interrupt, AIF3 was checked twice and AIF1 was not checked. This change correctly checks the AIF1 underclocked bit and reports the correct error messages for all cases. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 166254b..202bf55 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -98,9 +98,9 @@ static irqreturn_t arizona_underclocked(int irq, void *data) if (val & ARIZONA_AIF3_UNDERCLOCKED_STS) dev_err(arizona->dev, "AIF3 underclocked\n"); - if (val & ARIZONA_AIF3_UNDERCLOCKED_STS) - dev_err(arizona->dev, "AIF3 underclocked\n"); if (val & ARIZONA_AIF2_UNDERCLOCKED_STS) + dev_err(arizona->dev, "AIF2 underclocked\n"); + if (val & ARIZONA_AIF1_UNDERCLOCKED_STS) dev_err(arizona->dev, "AIF1 underclocked\n"); if (val & ARIZONA_ISRC2_UNDERCLOCKED_STS) dev_err(arizona->dev, "ISRC2 underclocked\n"); -- cgit v0.10.2 From 46b9d13aaec19dfbd5882a999e8ed85fc97a751e Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Tue, 20 Nov 2012 14:49:10 +0900 Subject: mfd: arizona: Sync regcache after reset In the absence of a physical reset line the chip is reset by writing the first register, which is done after the register patch has been applied. This patch synchronises the register cache after the reset to preserve any register changes that had been applied. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/arizona-core.c b/drivers/mfd/arizona-core.c index 202bf55..f4f9bf8 100644 --- a/drivers/mfd/arizona-core.c +++ b/drivers/mfd/arizona-core.c @@ -415,11 +415,19 @@ int __devinit arizona_dev_init(struct arizona *arizona) /* If we have a /RESET GPIO we'll already be reset */ if (!arizona->pdata.reset) { + regcache_mark_dirty(arizona->regmap); + ret = regmap_write(arizona->regmap, ARIZONA_SOFTWARE_RESET, 0); if (ret != 0) { dev_err(dev, "Failed to reset device: %d\n", ret); goto err_reset; } + + ret = regcache_sync(arizona->regmap); + if (ret != 0) { + dev_err(dev, "Failed to sync device: %d\n", ret); + goto err_reset; + } } ret = arizona_wait_for_boot(arizona); -- cgit v0.10.2 From e506d6fde50e0a737234892eda31708692bdda29 Mon Sep 17 00:00:00 2001 From: Daniel Vetter Date: Tue, 13 Nov 2012 17:24:43 +0100 Subject: drm/i915: disable cloning on sdvo After the recent pile of disable-cloning patches, e.g. commit e3b86d6941c7e5f90be05d986fce1fcb40c68d6b Author: Egbert Eich Date: Sat Oct 13 14:30:15 2012 +0200 DRM/i915: Don't clone SDVO LVDS with analog and a bug report from Chris Wilson indicating that cloning doesn't even work for DVI-SDVO and native VGA, let's just disable cloning on sdvo encoders completely. v2: Update the comment in the code as discussed with Paulo Zanoni. Reviewed-by: Paulo Zanoni Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29259 Tested-by: Chris Wilson Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_sdvo.c b/drivers/gpu/drm/i915/intel_sdvo.c index c600fb0..a6ac0b4 100644 --- a/drivers/gpu/drm/i915/intel_sdvo.c +++ b/drivers/gpu/drm/i915/intel_sdvo.c @@ -2201,7 +2201,6 @@ intel_sdvo_dvi_init(struct intel_sdvo *intel_sdvo, int device) connector->connector_type = DRM_MODE_CONNECTOR_HDMIA; intel_sdvo->is_hdmi = true; } - intel_sdvo->base.cloneable = true; intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); if (intel_sdvo->is_hdmi) @@ -2232,7 +2231,6 @@ intel_sdvo_tv_init(struct intel_sdvo *intel_sdvo, int type) intel_sdvo->is_tv = true; intel_sdvo->base.needs_tv_clock = true; - intel_sdvo->base.cloneable = false; intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); @@ -2275,8 +2273,6 @@ intel_sdvo_analog_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_connector->output_flag = SDVO_OUTPUT_RGB1; } - intel_sdvo->base.cloneable = true; - intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); return true; @@ -2307,9 +2303,6 @@ intel_sdvo_lvds_init(struct intel_sdvo *intel_sdvo, int device) intel_sdvo_connector->output_flag = SDVO_OUTPUT_LVDS1; } - /* SDVO LVDS is not cloneable because the input mode gets adjusted by the encoder */ - intel_sdvo->base.cloneable = false; - intel_sdvo_connector_init(intel_sdvo_connector, intel_sdvo); if (!intel_sdvo_create_enhance_property(intel_sdvo, intel_sdvo_connector)) goto err; @@ -2721,6 +2714,16 @@ bool intel_sdvo_init(struct drm_device *dev, uint32_t sdvo_reg, bool is_sdvob) goto err_output; } + /* + * Cloning SDVO with anything is often impossible, since the SDVO + * encoder can request a special input timing mode. And even if that's + * not the case we have evidence that cloning a plain unscaled mode with + * VGA doesn't really work. Furthermore the cloning flags are way too + * simplistic anyway to express such constraints, so just give up on + * cloning for SDVO encoders. + */ + intel_sdvo->base.cloneable = false; + /* Only enable the hotplug irq if we need it, to work around noisy * hotplug lines. */ -- cgit v0.10.2 From 5edd0b946a0afeb1d0364a3654328b046fb818a2 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Tue, 20 Nov 2012 16:31:25 +0200 Subject: iwlwifi: fix the basic CCK rates calculation Fix a copy paste error in iwl_calc_basic_rates which leads to a wrong calculation of CCK basic rates. Cc: stable@vger.kernel.org Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/rxon.c b/drivers/net/wireless/iwlwifi/dvm/rxon.c index 1089639..2830ea2 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rxon.c +++ b/drivers/net/wireless/iwlwifi/dvm/rxon.c @@ -1012,12 +1012,12 @@ static void iwl_calc_basic_rates(struct iwl_priv *priv, * As a consequence, it's not as complicated as it sounds, just add * any lower rates to the ACK rate bitmap. */ - if (IWL_RATE_11M_INDEX < lowest_present_ofdm) - ofdm |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE; - if (IWL_RATE_5M_INDEX < lowest_present_ofdm) - ofdm |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE; - if (IWL_RATE_2M_INDEX < lowest_present_ofdm) - ofdm |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_11M_INDEX < lowest_present_cck) + cck |= IWL_RATE_11M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_5M_INDEX < lowest_present_cck) + cck |= IWL_RATE_5M_MASK >> IWL_FIRST_CCK_RATE; + if (IWL_RATE_2M_INDEX < lowest_present_cck) + cck |= IWL_RATE_2M_MASK >> IWL_FIRST_CCK_RATE; /* 1M already there or needed so always add */ cck |= IWL_RATE_1M_MASK >> IWL_FIRST_CCK_RATE; -- cgit v0.10.2 From 70b9b24d4d240ff5f6087bca4013c6969af275ab Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Thu, 22 Nov 2012 00:11:09 +0900 Subject: ARM: S3C24XX: Fix potential NULL pointer dereference error chan->end is tested for being NULL. However in the event that it is NULL, the subsequent assignment statement would lead to NULL pointer dereference. Thus dereferencing it only when it is not NULL. Signed-off-by: Sachin Kamat Signed-off-by: Kukjin Kim diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index db98e70..0abd1c4 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -473,12 +473,13 @@ int s3c2410_dma_enqueue(enum dma_ch channel, void *id, pr_debug("dma%d: %s: buffer %p queued onto non-empty channel\n", chan->number, __func__, buf); - if (chan->end == NULL) + if (chan->end == NULL) { pr_debug("dma%d: %s: %p not empty, and chan->end==NULL?\n", chan->number, __func__, chan); - - chan->end->next = buf; - chan->end = buf; + } else { + chan->end->next = buf; + chan->end = buf; + } } /* if necessary, update the next buffer field */ -- cgit v0.10.2 From 8b41669ceba0c2d4c09d69ccb9a3458953dae784 Mon Sep 17 00:00:00 2001 From: Kalle Jokiniemi Date: Tue, 16 Oct 2012 17:59:35 +0300 Subject: mfd: twl4030: Fix chained irq handling on resume from suspend The irqs are enabled one-by-one in pm core resume_noirq phase. This leads to situation where the twl4030 primary interrupt handler (PIH) is enabled before the chained secondary handlers (SIH). As the PIH cannot clear the pending interrupt, and SIHs have not been enabled yet, a flood of interrupts hangs the device. Fixed the issue by setting the SIH irqs with IRQF_EARLY_RESUME flags, so they get enabled before the PIH. Signed-off-by: Kalle Jokiniemi Acked-by: Kevin Hilman Signed-off-by: Samuel Ortiz diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c index ad733d7..cdd1173 100644 --- a/drivers/mfd/twl4030-irq.c +++ b/drivers/mfd/twl4030-irq.c @@ -672,7 +672,8 @@ int twl4030_sih_setup(struct device *dev, int module, int irq_base) irq = sih_mod + twl4030_irq_base; irq_set_handler_data(irq, agent); agent->irq_name = kasprintf(GFP_KERNEL, "twl4030_%s", sih->name); - status = request_threaded_irq(irq, NULL, handle_twl4030_sih, 0, + status = request_threaded_irq(irq, NULL, handle_twl4030_sih, + IRQF_EARLY_RESUME, agent->irq_name ?: sih->name, NULL); dev_info(dev, "%s (irq %d) chaining IRQs %d..%d\n", sih->name, -- cgit v0.10.2 From 5d3df935426271016b895aecaa247101b4bfa35e Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sun, 18 Nov 2012 16:29:44 +0000 Subject: Dove: Attempt to fix PMU/RTC interrupts Fix the acknowledgement of PMU interrupts on Dove: some Dove hardware has not been sensibly designed so that interrupts can be handled in a race free manner. The PMU is one such instance. The pending (aka 'cause') register is a bunch of RW bits, meaning that these bits can be both cleared and set by software (confirmed on the Armada-510 on the cubox.) Hardware sets the appropriate bit when an interrupt is asserted, and software is required to clear the bits which are to be processed. If we write ~(1 << bit), then we end up asserting every other interrupt except the one we're processing. So, we need to do a read-modify-write cycle to clear the asserted bit. However, any interrupts which occur in the middle of this cycle will also be written back as zero, which will also clear the new interrupts. The upshot of this is: there is _no_ way to safely clear down interrupts in this register (and other similarly behaving interrupt pending registers on this device.) The patch below at least stops us creating new interrupts. Signed-off-by: Russell King Cc: stable@vger.kernel.org Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c index 0877115..bc4344a 100644 --- a/arch/arm/mach-dove/irq.c +++ b/arch/arm/mach-dove/irq.c @@ -46,8 +46,20 @@ static void pmu_irq_ack(struct irq_data *d) int pin = irq_to_pmu(d->irq); u32 u; + /* + * The PMU mask register is not RW0C: it is RW. This means that + * the bits take whatever value is written to them; if you write + * a '1', you will set the interrupt. + * + * Unfortunately this means there is NO race free way to clear + * these interrupts. + * + * So, let's structure the code so that the window is as small as + * possible. + */ u = ~(1 << (pin & 31)); - writel(u, PMU_INTERRUPT_CAUSE); + u &= readl_relaxed(PMU_INTERRUPT_CAUSE); + writel_relaxed(u, PMU_INTERRUPT_CAUSE); } static struct irq_chip pmu_irq_chip = { -- cgit v0.10.2 From d356cf5a74afa32b40decca3c9dd88bc3cd63eb5 Mon Sep 17 00:00:00 2001 From: Russell King - ARM Linux Date: Sun, 18 Nov 2012 16:39:32 +0000 Subject: Dove: Fix irq_to_pmu() PMU interrupts start at IRQ_DOVE_PMU_START, not IRQ_DOVE_PMU_START + 1. Fix the condition. (It may have been less likely to occur had the code been written "if (irq >= IRQ_DOVE_PMU_START" which imho is the easier to understand notation, and matches the normal way of thinking about these things.) Signed-off-by: Russell King Cc: stable@vger.kernel.org Signed-off-by: Jason Cooper diff --git a/arch/arm/mach-dove/include/mach/pm.h b/arch/arm/mach-dove/include/mach/pm.h index 7bcd0df..b47f750 100644 --- a/arch/arm/mach-dove/include/mach/pm.h +++ b/arch/arm/mach-dove/include/mach/pm.h @@ -63,7 +63,7 @@ static inline int pmu_to_irq(int pin) static inline int irq_to_pmu(int irq) { - if (IRQ_DOVE_PMU_START < irq && irq < NR_IRQS) + if (IRQ_DOVE_PMU_START <= irq && irq < NR_IRQS) return irq - IRQ_DOVE_PMU_START; return -EINVAL; -- cgit v0.10.2 From 1dc831bf53fddcc6443f74a39e72db5bcea4f15d Mon Sep 17 00:00:00 2001 From: Jason Gunthorpe Date: Wed, 21 Nov 2012 00:19:06 -0700 Subject: ARM: Kirkwood: Update PCI-E fixup - The code relies on rc_pci_fixup being called, which only happens when CONFIG_PCI_QUIRKS is enabled, so add that to Kconfig. Omitting this causes a booting failure with a non-obvious cause. - Update rc_pci_fixup to set the class properly, copying the more modern style from other places - Correct the rc_pci_fixup comment Signed-off-by: Jason Gunthorpe Cc: stable@vger.kernel.org Signed-off-by: Jason Cooper diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index ade7e92..9759fec 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -547,6 +547,7 @@ config ARCH_KIRKWOOD select CPU_FEROCEON select GENERIC_CLOCKEVENTS select PCI + select PCI_QUIRKS select PLAT_ORION_LEGACY help Support for the following Marvell Kirkwood series SoCs: diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index ec54491..74fc5a0 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -207,14 +207,19 @@ static int __init kirkwood_pcie_setup(int nr, struct pci_sys_data *sys) return 1; } +/* + * The root complex has a hardwired class of PCI_CLASS_MEMORY_OTHER, when it + * is operating as a root complex this needs to be switched to + * PCI_CLASS_BRIDGE_HOST or Linux will errantly try to process the BAR's on + * the device. Decoding setup is handled by the orion code. + */ static void __devinit rc_pci_fixup(struct pci_dev *dev) { - /* - * Prevent enumeration of root complex. - */ if (dev->bus->parent == NULL && dev->devfn == 0) { int i; + dev->class &= 0xff; + dev->class |= PCI_CLASS_BRIDGE_HOST << 8; for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { dev->resource[i].start = 0; dev->resource[i].end = 0; -- cgit v0.10.2 From 809396474f41fb6e7e676e298d79856c5e02d755 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 05:46:21 -0300 Subject: [media] adv7604: cleanup references Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 109bc9b..75a8395 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -1123,7 +1123,7 @@ static int adv7604_query_dv_timings(struct v4l2_subdev *sd, adv7604_fill_optional_dv_timings_fields(sd, timings); } else { /* find format - * Since LCVS values are inaccurate (REF_03, page 275-276), + * Since LCVS values are inaccurate [REF_03, p. 275-276], * stdi2dv_timings() is called with lcvs +-1 if the first attempt fails. */ if (!stdi2dv_timings(sd, &stdi, timings)) @@ -1712,9 +1712,9 @@ static int adv7604_core_init(struct v4l2_subdev *sd) cp_write(sd, 0xba, (pdata->hdmi_free_run_mode << 1) | 0x01); /* HDMI free run */ cp_write(sd, 0xf3, 0xdc); /* Low threshold to enter/exit free run mode */ cp_write(sd, 0xf9, 0x23); /* STDI ch. 1 - LCVS change threshold - - ADI recommended setting [REF_01 c. 2.3.3] */ + ADI recommended setting [REF_01, c. 2.3.3] */ cp_write(sd, 0x45, 0x23); /* STDI ch. 2 - LCVS change threshold - - ADI recommended setting [REF_01 c. 2.3.3] */ + ADI recommended setting [REF_01, c. 2.3.3] */ cp_write(sd, 0xc9, 0x2d); /* use prim_mode and vid_std as free run resolution for digital formats */ -- cgit v0.10.2 From 6b0d5d344a78d43957a9f49c549b6f3aa2dc2082 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 06:40:45 -0300 Subject: [media] adv7604: Replace prim_mode by mode Changes the way the primary mode is handled: - Remove it from platform_data since it doesn't belong there. - Add a new mode enum for use with s_routing. - Collapse the two HDMI modes into one HDMI mode: when setting up the timings manually we do not need to select HDMI_COMP mode. That's only needed when selecting a preset. This patch prepares for the next step where we switch to using the presets where available. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 75a8395..74a18c0 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -53,8 +53,7 @@ MODULE_LICENSE("GPL"); /* ADV7604 system clock frequency */ #define ADV7604_fsc (28636360) -#define DIGITAL_INPUT ((state->prim_mode == ADV7604_PRIM_MODE_HDMI_COMP) || \ - (state->prim_mode == ADV7604_PRIM_MODE_HDMI_GR)) +#define DIGITAL_INPUT (state->mode == ADV7604_MODE_HDMI) /* ********************************************************************** @@ -68,7 +67,7 @@ struct adv7604_state { struct v4l2_subdev sd; struct media_pad pad; struct v4l2_ctrl_handler hdl; - enum adv7604_prim_mode prim_mode; + enum adv7604_mode mode; struct v4l2_dv_timings timings; u8 edid[256]; unsigned edid_blocks; @@ -738,12 +737,7 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd) switch (state->rgb_quantization_range) { case V4L2_DV_RGB_RANGE_AUTO: /* automatic */ - if ((hdmi_read(sd, 0x05) & 0x80) || - (state->prim_mode == ADV7604_PRIM_MODE_COMP) || - (state->prim_mode == ADV7604_PRIM_MODE_RGB)) { - /* receiving HDMI or analog signal */ - io_write_and_or(sd, 0x02, 0x0f, 0xf0); - } else { + if (DIGITAL_INPUT && !(hdmi_read(sd, 0x05) & 0x80)) { /* receiving DVI-D signal */ /* ADV7604 selects RGB limited range regardless of @@ -756,6 +750,9 @@ static void set_rgb_quantization_range(struct v4l2_subdev *sd) /* RGB full range (0-255) */ io_write_and_or(sd, 0x02, 0x0f, 0x10); } + } else { + /* receiving HDMI or analog signal, set automode */ + io_write_and_or(sd, 0x02, 0x0f, 0xf0); } break; case V4L2_DV_RGB_RANGE_LIMITED: @@ -1203,24 +1200,25 @@ static int adv7604_g_dv_timings(struct v4l2_subdev *sd, return 0; } -static void enable_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) +static void enable_input(struct v4l2_subdev *sd) { - switch (prim_mode) { - case ADV7604_PRIM_MODE_COMP: - case ADV7604_PRIM_MODE_RGB: + struct adv7604_state *state = to_state(sd); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: /* enable */ io_write(sd, 0x15, 0xb0); /* Disable Tristate of Pins (no audio) */ break; - case ADV7604_PRIM_MODE_HDMI_COMP: - case ADV7604_PRIM_MODE_HDMI_GR: + case ADV7604_MODE_HDMI: /* enable */ hdmi_write(sd, 0x1a, 0x0a); /* Unmute audio */ hdmi_write(sd, 0x01, 0x00); /* Enable HDMI clock terminators */ io_write(sd, 0x15, 0xa0); /* Disable Tristate of Pins */ break; default: - v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", - __func__, prim_mode); + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); break; } } @@ -1233,11 +1231,13 @@ static void disable_input(struct v4l2_subdev *sd) hdmi_write(sd, 0x01, 0x78); /* Disable HDMI clock terminators */ } -static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mode) +static void select_input(struct v4l2_subdev *sd) { - switch (prim_mode) { - case ADV7604_PRIM_MODE_COMP: - case ADV7604_PRIM_MODE_RGB: + struct adv7604_state *state = to_state(sd); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: /* set mode and select free run resolution */ io_write(sd, 0x00, 0x07); /* video std */ io_write(sd, 0x01, 0x02); /* prim mode */ @@ -1271,13 +1271,10 @@ static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mod cp_write(sd, 0x40, 0x5c); /* CP core pre-gain control. Graphics mode */ break; - case ADV7604_PRIM_MODE_HDMI_COMP: - case ADV7604_PRIM_MODE_HDMI_GR: + case ADV7604_MODE_HDMI: /* set mode and select free run resolution */ - /* video std */ - io_write(sd, 0x00, - (prim_mode == ADV7604_PRIM_MODE_HDMI_GR) ? 0x02 : 0x1e); - io_write(sd, 0x01, prim_mode); /* prim mode */ + io_write(sd, 0x00, 0x02); /* video std */ + io_write(sd, 0x01, 0x06); /* prim mode */ /* disable embedded syncs for auto graphics mode */ cp_write_and_or(sd, 0x81, 0xef, 0x00); @@ -1309,7 +1306,8 @@ static void select_input(struct v4l2_subdev *sd, enum adv7604_prim_mode prim_mod break; default: - v4l2_err(sd, "%s: reserved primary mode 0x%0x\n", __func__, prim_mode); + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); break; } } @@ -1321,26 +1319,13 @@ static int adv7604_s_routing(struct v4l2_subdev *sd, v4l2_dbg(2, debug, sd, "%s: input %d", __func__, input); - switch (input) { - case 0: - /* TODO select HDMI_COMP or HDMI_GR */ - state->prim_mode = ADV7604_PRIM_MODE_HDMI_COMP; - break; - case 1: - state->prim_mode = ADV7604_PRIM_MODE_RGB; - break; - case 2: - state->prim_mode = ADV7604_PRIM_MODE_COMP; - break; - default: - return -EINVAL; - } + state->mode = input; disable_input(sd); - select_input(sd, state->prim_mode); + select_input(sd); - enable_input(sd, state->prim_mode); + enable_input(sd); return 0; } @@ -1724,11 +1709,6 @@ static int adv7604_core_init(struct v4l2_subdev *sd) afe_write(sd, 0x02, pdata->ain_sel); /* Select analog input muxing mode */ io_write_and_or(sd, 0x30, ~(1 << 4), pdata->output_bus_lsb_to_msb << 4); - state->prim_mode = pdata->prim_mode; - select_input(sd, pdata->prim_mode); - - enable_input(sd, pdata->prim_mode); - /* interrupts */ io_write(sd, 0x40, 0xc2); /* Configure INT1 */ io_write(sd, 0x41, 0xd7); /* STDI irq for any change, disable INT2 */ diff --git a/include/media/adv7604.h b/include/media/adv7604.h index 171b957..dc004bc 100644 --- a/include/media/adv7604.h +++ b/include/media/adv7604.h @@ -40,14 +40,6 @@ enum adv7604_op_ch_sel { ADV7604_OP_CH_SEL_RBG = 5, }; -/* Primary mode (IO register 0x01, [3:0]) */ -enum adv7604_prim_mode { - ADV7604_PRIM_MODE_COMP = 1, - ADV7604_PRIM_MODE_RGB = 2, - ADV7604_PRIM_MODE_HDMI_COMP = 5, - ADV7604_PRIM_MODE_HDMI_GR = 6, -}; - /* Input Color Space (IO register 0x02, [7:4]) */ enum adv7604_inp_color_space { ADV7604_INP_COLOR_SPACE_LIM_RGB = 0, @@ -103,9 +95,6 @@ struct adv7604_platform_data { /* Bus rotation and reordering */ enum adv7604_op_ch_sel op_ch_sel; - /* Primary mode */ - enum adv7604_prim_mode prim_mode; - /* Select output format */ enum adv7604_op_format_sel op_format_sel; @@ -142,6 +131,16 @@ struct adv7604_platform_data { u8 i2c_vdp; }; +/* + * Mode of operation. + * This is used as the input argument of the s_routing video op. + */ +enum adv7604_mode { + ADV7604_MODE_COMP, + ADV7604_MODE_GR, + ADV7604_MODE_HDMI, +}; + #define V4L2_CID_ADV_RX_ANALOG_SAMPLING_PHASE (V4L2_CID_DV_CLASS_BASE + 0x1000) #define V4L2_CID_ADV_RX_FREE_RUN_COLOR_MANUAL (V4L2_CID_DV_CLASS_BASE + 0x1001) #define V4L2_CID_ADV_RX_FREE_RUN_COLOR (V4L2_CID_DV_CLASS_BASE + 0x1002) -- cgit v0.10.2 From ccbd5bc448ec782af7d1f3f68bd450c9c38015a0 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 10:02:05 -0300 Subject: [media] adv7604: use presets where possible Use predefined video timings (prim_mode/vid_std) when available as recommended by Analog Devices (http://ez.analog.com/message/48267#48267). Also remove 720p30 support since the ADV7604 can't handle that. (http://ez.analog.com/message/61488#61488) Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 74a18c0..88b7984 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -105,7 +105,6 @@ static const struct v4l2_dv_timings adv7604_timings[] = { V4L2_DV_BT_CEA_720X576P50, V4L2_DV_BT_CEA_1280X720P24, V4L2_DV_BT_CEA_1280X720P25, - V4L2_DV_BT_CEA_1280X720P30, V4L2_DV_BT_CEA_1280X720P50, V4L2_DV_BT_CEA_1280X720P60, V4L2_DV_BT_CEA_1920X1080P24, @@ -114,6 +113,7 @@ static const struct v4l2_dv_timings adv7604_timings[] = { V4L2_DV_BT_CEA_1920X1080P50, V4L2_DV_BT_CEA_1920X1080P60, + /* sorted by DMT ID */ V4L2_DV_BT_DMT_640X350P85, V4L2_DV_BT_DMT_640X400P85, V4L2_DV_BT_DMT_720X400P85, @@ -163,6 +163,89 @@ static const struct v4l2_dv_timings adv7604_timings[] = { { }, }; +struct adv7604_video_standards { + struct v4l2_dv_timings timings; + u8 vid_std; + u8 v_freq; +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_comp[] = { + /* { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, TODO flickering */ + { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, + { V4L2_DV_BT_CEA_1280X720P50, 0x19, 0x01 }, + { V4L2_DV_BT_CEA_1280X720P60, 0x19, 0x00 }, + { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, + { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, + { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, + { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, + { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, + /* TODO add 1920x1080P60_RB (CVT timing) */ + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_gr[] = { + { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, + { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, + { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, + { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, + { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, + { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, + { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, + { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, + { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, + { V4L2_DV_BT_DMT_1360X768P60, 0x12, 0x00 }, + { V4L2_DV_BT_DMT_1366X768P60, 0x13, 0x00 }, + { V4L2_DV_BT_DMT_1400X1050P60, 0x14, 0x00 }, + { V4L2_DV_BT_DMT_1400X1050P75, 0x15, 0x00 }, + { V4L2_DV_BT_DMT_1600X1200P60, 0x16, 0x00 }, /* TODO not tested */ + /* TODO add 1600X1200P60_RB (not a DMT timing) */ + { V4L2_DV_BT_DMT_1680X1050P60, 0x18, 0x00 }, + { V4L2_DV_BT_DMT_1920X1200P60_RB, 0x19, 0x00 }, /* TODO not tested */ + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_hdmi_comp[] = { + { V4L2_DV_BT_CEA_720X480P59_94, 0x0a, 0x00 }, + { V4L2_DV_BT_CEA_720X576P50, 0x0b, 0x00 }, + { V4L2_DV_BT_CEA_1280X720P50, 0x13, 0x01 }, + { V4L2_DV_BT_CEA_1280X720P60, 0x13, 0x00 }, + { V4L2_DV_BT_CEA_1920X1080P24, 0x1e, 0x04 }, + { V4L2_DV_BT_CEA_1920X1080P25, 0x1e, 0x03 }, + { V4L2_DV_BT_CEA_1920X1080P30, 0x1e, 0x02 }, + { V4L2_DV_BT_CEA_1920X1080P50, 0x1e, 0x01 }, + { V4L2_DV_BT_CEA_1920X1080P60, 0x1e, 0x00 }, + { }, +}; + +/* sorted by number of lines */ +static const struct adv7604_video_standards adv7604_prim_mode_hdmi_gr[] = { + { V4L2_DV_BT_DMT_640X480P60, 0x08, 0x00 }, + { V4L2_DV_BT_DMT_640X480P72, 0x09, 0x00 }, + { V4L2_DV_BT_DMT_640X480P75, 0x0a, 0x00 }, + { V4L2_DV_BT_DMT_640X480P85, 0x0b, 0x00 }, + { V4L2_DV_BT_DMT_800X600P56, 0x00, 0x00 }, + { V4L2_DV_BT_DMT_800X600P60, 0x01, 0x00 }, + { V4L2_DV_BT_DMT_800X600P72, 0x02, 0x00 }, + { V4L2_DV_BT_DMT_800X600P75, 0x03, 0x00 }, + { V4L2_DV_BT_DMT_800X600P85, 0x04, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P60, 0x0c, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P70, 0x0d, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P75, 0x0e, 0x00 }, + { V4L2_DV_BT_DMT_1024X768P85, 0x0f, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P60, 0x05, 0x00 }, + { V4L2_DV_BT_DMT_1280X1024P75, 0x06, 0x00 }, + { }, +}; + /* ----------------------------------------------------------------------- */ static inline struct adv7604_state *to_state(struct v4l2_subdev *sd) @@ -671,64 +754,144 @@ static int adv7604_s_detect_tx_5v_ctrl(struct v4l2_subdev *sd) ((io_read(sd, 0x6f) & 0x10) >> 4)); } -static void configure_free_run(struct v4l2_subdev *sd, const struct v4l2_bt_timings *timings) +static int find_and_set_predefined_video_timings(struct v4l2_subdev *sd, + u8 prim_mode, + const struct adv7604_video_standards *predef_vid_timings, + const struct v4l2_dv_timings *timings) +{ + struct adv7604_state *state = to_state(sd); + int i; + + for (i = 0; predef_vid_timings[i].timings.bt.width; i++) { + if (!v4l_match_dv_timings(timings, &predef_vid_timings[i].timings, + DIGITAL_INPUT ? 250000 : 1000000)) + continue; + io_write(sd, 0x00, predef_vid_timings[i].vid_std); /* video std */ + io_write(sd, 0x01, (predef_vid_timings[i].v_freq << 4) + + prim_mode); /* v_freq and prim mode */ + return 0; + } + + return -1; +} + +static int configure_predefined_video_timings(struct v4l2_subdev *sd, + struct v4l2_dv_timings *timings) { + struct adv7604_state *state = to_state(sd); + int err; + + v4l2_dbg(1, debug, sd, "%s", __func__); + + /* reset to default values */ + io_write(sd, 0x16, 0x43); + io_write(sd, 0x17, 0x5a); + /* disable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x00); + cp_write(sd, 0x8f, 0x00); + cp_write(sd, 0x90, 0x00); + cp_write(sd, 0xa2, 0x00); + cp_write(sd, 0xa3, 0x00); + cp_write(sd, 0xa4, 0x00); + cp_write(sd, 0xa5, 0x00); + cp_write(sd, 0xa6, 0x00); + cp_write(sd, 0xa7, 0x00); + cp_write(sd, 0xab, 0x00); + cp_write(sd, 0xac, 0x00); + + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + err = find_and_set_predefined_video_timings(sd, + 0x01, adv7604_prim_mode_comp, timings); + if (err) + err = find_and_set_predefined_video_timings(sd, + 0x02, adv7604_prim_mode_gr, timings); + break; + case ADV7604_MODE_HDMI: + err = find_and_set_predefined_video_timings(sd, + 0x05, adv7604_prim_mode_hdmi_comp, timings); + if (err) + err = find_and_set_predefined_video_timings(sd, + 0x06, adv7604_prim_mode_hdmi_gr, timings); + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + err = -1; + break; + } + + + return err; +} + +static void configure_custom_video_timings(struct v4l2_subdev *sd, + const struct v4l2_bt_timings *bt) +{ + struct adv7604_state *state = to_state(sd); struct i2c_client *client = v4l2_get_subdevdata(sd); - u32 width = htotal(timings); - u32 height = vtotal(timings); - u16 ch1_fr_ll = (((u32)timings->pixelclock / 100) > 0) ? - ((width * (ADV7604_fsc / 100)) / ((u32)timings->pixelclock / 100)) : 0; + u32 width = htotal(bt); + u32 height = vtotal(bt); + u16 cp_start_sav = bt->hsync + bt->hbackporch - 4; + u16 cp_start_eav = width - bt->hfrontporch; + u16 cp_start_vbi = height - bt->vfrontporch; + u16 cp_end_vbi = bt->vsync + bt->vbackporch; + u16 ch1_fr_ll = (((u32)bt->pixelclock / 100) > 0) ? + ((width * (ADV7604_fsc / 100)) / ((u32)bt->pixelclock / 100)) : 0; + const u8 pll[2] = { + 0xc0 | ((width >> 8) & 0x1f), + width & 0xff + }; v4l2_dbg(2, debug, sd, "%s\n", __func__); - cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); /* CH1_FR_LL */ - cp_write(sd, 0x90, ch1_fr_ll & 0xff); /* CH1_FR_LL */ - cp_write(sd, 0xab, (height >> 4) & 0xff); /* CP_LCOUNT_MAX */ - cp_write(sd, 0xac, (height & 0x0f) << 4); /* CP_LCOUNT_MAX */ - /* TODO support interlaced */ - cp_write(sd, 0x91, 0x10); /* INTERLACED */ - - /* Should only be set in auto-graphics mode [REF_02 p. 91-92] */ - if ((io_read(sd, 0x00) == 0x07) && (io_read(sd, 0x01) == 0x02)) { - u16 cp_start_sav, cp_start_eav, cp_start_vbi, cp_end_vbi; - const u8 pll[2] = { - (0xc0 | ((width >> 8) & 0x1f)), - (width & 0xff) - }; + switch (state->mode) { + case ADV7604_MODE_COMP: + case ADV7604_MODE_GR: + /* auto graphics */ + io_write(sd, 0x00, 0x07); /* video std */ + io_write(sd, 0x01, 0x02); /* prim mode */ + /* enable embedded syncs for auto graphics mode */ + cp_write_and_or(sd, 0x81, 0xef, 0x10); + /* Should only be set in auto-graphics mode [REF_02, p. 91-92] */ /* setup PLL_DIV_MAN_EN and PLL_DIV_RATIO */ /* IO-map reg. 0x16 and 0x17 should be written in sequence */ if (adv_smbus_write_i2c_block_data(client, 0x16, 2, pll)) { v4l2_err(sd, "writing to reg 0x16 and 0x17 failed\n"); - return; + break; } /* active video - horizontal timing */ - cp_start_sav = timings->hsync + timings->hbackporch - 4; - cp_start_eav = width - timings->hfrontporch; cp_write(sd, 0xa2, (cp_start_sav >> 4) & 0xff); - cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | ((cp_start_eav >> 8) & 0x0f)); + cp_write(sd, 0xa3, ((cp_start_sav & 0x0f) << 4) | + ((cp_start_eav >> 8) & 0x0f)); cp_write(sd, 0xa4, cp_start_eav & 0xff); /* active video - vertical timing */ - cp_start_vbi = height - timings->vfrontporch; - cp_end_vbi = timings->vsync + timings->vbackporch; cp_write(sd, 0xa5, (cp_start_vbi >> 4) & 0xff); - cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | ((cp_end_vbi >> 8) & 0xf)); + cp_write(sd, 0xa6, ((cp_start_vbi & 0xf) << 4) | + ((cp_end_vbi >> 8) & 0xf)); cp_write(sd, 0xa7, cp_end_vbi & 0xff); - } else { - /* reset to default values */ - io_write(sd, 0x16, 0x43); - io_write(sd, 0x17, 0x5a); - cp_write(sd, 0xa2, 0x00); - cp_write(sd, 0xa3, 0x00); - cp_write(sd, 0xa4, 0x00); - cp_write(sd, 0xa5, 0x00); - cp_write(sd, 0xa6, 0x00); - cp_write(sd, 0xa7, 0x00); + break; + case ADV7604_MODE_HDMI: + /* set default prim_mode/vid_std for HDMI + accoring to [REF_03, c. 4.2] */ + io_write(sd, 0x00, 0x02); /* video std */ + io_write(sd, 0x01, 0x06); /* prim mode */ + break; + default: + v4l2_dbg(2, debug, sd, "%s: Unknown mode %d\n", + __func__, state->mode); + break; } -} + cp_write(sd, 0x8f, (ch1_fr_ll >> 8) & 0x7); + cp_write(sd, 0x90, ch1_fr_ll & 0xff); + cp_write(sd, 0xab, (height >> 4) & 0xff); + cp_write(sd, 0xac, (height & 0x0f) << 4); +} static void set_rgb_quantization_range(struct v4l2_subdev *sd) { @@ -964,8 +1127,10 @@ static int stdi2dv_timings(struct v4l2_subdev *sd, state->aspect_ratio, timings)) return 0; - v4l2_dbg(2, debug, sd, "%s: No format candidate found for lcf=%d, bl = %d\n", - __func__, stdi->lcf, stdi->bl); + v4l2_dbg(2, debug, sd, + "%s: No format candidate found for lcvs = %d, lcf=%d, bl = %d, %chsync, %cvsync\n", + __func__, stdi->lcvs, stdi->lcf, stdi->bl, + stdi->hs_pol, stdi->vs_pol); return -1; } @@ -1163,6 +1328,7 @@ static int adv7604_s_dv_timings(struct v4l2_subdev *sd, { struct adv7604_state *state = to_state(sd); struct v4l2_bt_timings *bt; + int err; if (!timings) return -EINVAL; @@ -1175,12 +1341,20 @@ static int adv7604_s_dv_timings(struct v4l2_subdev *sd, __func__, (u32)bt->pixelclock); return -ERANGE; } + adv7604_fill_optional_dv_timings_fields(sd, timings); state->timings = *timings; - /* freerun */ - configure_free_run(sd, bt); + cp_write(sd, 0x91, bt->interlaced ? 0x50 : 0x10); + + /* Use prim_mode and vid_std when available */ + err = configure_predefined_video_timings(sd, timings); + if (err) { + /* custom settings when the video format + does not have prim_mode/vid_std */ + configure_custom_video_timings(sd, bt); + } set_rgb_quantization_range(sd); @@ -1238,12 +1412,6 @@ static void select_input(struct v4l2_subdev *sd) switch (state->mode) { case ADV7604_MODE_COMP: case ADV7604_MODE_GR: - /* set mode and select free run resolution */ - io_write(sd, 0x00, 0x07); /* video std */ - io_write(sd, 0x01, 0x02); /* prim mode */ - /* enable embedded syncs for auto graphics mode */ - cp_write_and_or(sd, 0x81, 0xef, 0x10); - /* reset ADI recommended settings for HDMI: */ /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ hdmi_write(sd, 0x0d, 0x04); /* HDMI filter optimization */ @@ -1272,12 +1440,6 @@ static void select_input(struct v4l2_subdev *sd) break; case ADV7604_MODE_HDMI: - /* set mode and select free run resolution */ - io_write(sd, 0x00, 0x02); /* video std */ - io_write(sd, 0x01, 0x06); /* prim mode */ - /* disable embedded syncs for auto graphics mode */ - cp_write_and_or(sd, 0x81, 0xef, 0x00); - /* set ADI recommended settings for HDMI: */ /* "ADV7604 Register Settings Recommendations (rev. 2.5, June 2010)" p. 4. */ hdmi_write(sd, 0x0d, 0x84); /* HDMI filter optimization */ @@ -1534,8 +1696,9 @@ static int adv7604_log_status(struct v4l2_subdev *sd) v4l2_info(sd, "CP locked: %s\n", no_lock_cp(sd) ? "false" : "true"); v4l2_info(sd, "CP free run: %s\n", (!!(cp_read(sd, 0xff) & 0x10) ? "on" : "off")); - v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x\n", - io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f); + v4l2_info(sd, "Prim-mode = 0x%x, video std = 0x%x, v_freq = 0x%x\n", + io_read(sd, 0x01) & 0x0f, io_read(sd, 0x00) & 0x3f, + (io_read(sd, 0x01) & 0x70) >> 4); v4l2_info(sd, "-----Video Timings-----\n"); if (read_stdi(sd, &stdi)) -- cgit v0.10.2 From cf9afb1dafaf1ffeffbb4acdb5adf255e8a2aa76 Mon Sep 17 00:00:00 2001 From: Hans Verkuil Date: Tue, 16 Oct 2012 10:12:55 -0300 Subject: [media] adv7604: restart STDI once if format is not found The STDI block may measure wrong values, especially for lcvs and lcf. If the driver can not find any valid timing, the STDI block is restarted to measure the video timings again. The function will return an error, but the restart of STDI will generate a new STDI interrupt and the format detection process will restart. Signed-off-by: Mats Randgaard Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index 88b7984..05f8950 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -76,6 +76,7 @@ struct adv7604_state { struct workqueue_struct *work_queues; struct delayed_work delayed_work_enable_hotplug; bool connector_hdmi; + bool restart_stdi_once; /* i2c clients */ struct i2c_client *i2c_avlink; @@ -1297,9 +1298,31 @@ static int adv7604_query_dv_timings(struct v4l2_subdev *sd, stdi.lcvs -= 2; v4l2_dbg(1, debug, sd, "%s: lcvs - 1 = %d\n", __func__, stdi.lcvs); if (stdi2dv_timings(sd, &stdi, timings)) { + /* + * The STDI block may measure wrong values, especially + * for lcvs and lcf. If the driver can not find any + * valid timing, the STDI block is restarted to measure + * the video timings again. The function will return an + * error, but the restart of STDI will generate a new + * STDI interrupt and the format detection process will + * restart. + */ + if (state->restart_stdi_once) { + v4l2_dbg(1, debug, sd, "%s: restart STDI\n", __func__); + /* TODO restart STDI for Sync Channel 2 */ + /* enter one-shot mode */ + cp_write_and_or(sd, 0x86, 0xf9, 0x00); + /* trigger STDI restart */ + cp_write_and_or(sd, 0x86, 0xf9, 0x04); + /* reset to continuous mode */ + cp_write_and_or(sd, 0x86, 0xf9, 0x02); + state->restart_stdi_once = false; + return -ENOLINK; + } v4l2_dbg(1, debug, sd, "%s: format not supported\n", __func__); return -ERANGE; } + state->restart_stdi_once = true; } found: @@ -2026,6 +2049,7 @@ static int adv7604_probe(struct i2c_client *client, v4l2_err(sd, "failed to create all i2c clients\n"); goto err_i2c; } + state->restart_stdi_once = true; /* work queues */ state->work_queues = create_singlethread_workqueue(client->name); -- cgit v0.10.2 From b1a925f44a3a21c538144e30b08f966cad7adb63 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Jean-Fran=C3=A7ois=20Moine?= Date: Tue, 20 Nov 2012 17:35:41 +0100 Subject: tty vt: Fix a regression in command line edition MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The commit 81732c3b2fede049a692e58a7ceabb6d18ffb18c ("Fix line garbage in virtual console on command line edition") made a regression with some machines: some characters were not erased after line edition. This patch adjusts the number of moved characters and the size of the region to be updated. Signed-off-by: Jean-François Moine Tested-by: Krzysztof Mazur Signed-off-by: Greg Kroah-Hartman diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index f87d7e8..4e0d0c3 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -539,25 +539,25 @@ static void insert_char(struct vc_data *vc, unsigned int nr) { unsigned short *p = (unsigned short *) vc->vc_pos; - scr_memmovew(p + nr, p, vc->vc_cols - vc->vc_x); + scr_memmovew(p + nr, p, (vc->vc_cols - vc->vc_x) * 2); scr_memsetw(p, vc->vc_video_erase_char, nr * 2); vc->vc_need_wrap = 0; if (DO_UPDATE(vc)) do_update_region(vc, (unsigned long) p, - (vc->vc_cols - vc->vc_x) / 2 + 1); + vc->vc_cols - vc->vc_x); } static void delete_char(struct vc_data *vc, unsigned int nr) { unsigned short *p = (unsigned short *) vc->vc_pos; - scr_memcpyw(p, p + nr, vc->vc_cols - vc->vc_x - nr); + scr_memcpyw(p, p + nr, (vc->vc_cols - vc->vc_x - nr) * 2); scr_memsetw(p + vc->vc_cols - vc->vc_x - nr, vc->vc_video_erase_char, nr * 2); vc->vc_need_wrap = 0; if (DO_UPDATE(vc)) do_update_region(vc, (unsigned long) p, - (vc->vc_cols - vc->vc_x) / 2); + vc->vc_cols - vc->vc_x); } static int softcursor_original; -- cgit v0.10.2 From 3043c5c8bf3511d76bbdcf27f56449549d4bb70c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Sat, 1 Sep 2012 18:28:14 +0200 Subject: IXP4xx: Fix Goramo MultiLink platform compilation. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index b800a03..f417632 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -15,6 +15,7 @@ #include #include #include +#include #define SLOT_ETHA 0x0B /* IDSEL = AD21 */ #define SLOT_ETHB 0x0C /* IDSEL = AD20 */ -- cgit v0.10.2 From 87ba5c6a313b4da5639a18d7796e51483ededd17 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Sun, 2 Sep 2012 19:23:27 +0200 Subject: IXP4xx: Fix off-by-one bug in Goramo MultiLink platform. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/arch/arm/mach-ixp4xx/goramo_mlr.c b/arch/arm/mach-ixp4xx/goramo_mlr.c index f417632..53b8348 100644 --- a/arch/arm/mach-ixp4xx/goramo_mlr.c +++ b/arch/arm/mach-ixp4xx/goramo_mlr.c @@ -330,7 +330,7 @@ static struct platform_device device_hss_tab[] = { }; -static struct platform_device *device_tab[6] __initdata = { +static struct platform_device *device_tab[7] __initdata = { &device_flash, /* index 0 */ }; -- cgit v0.10.2 From 553da857b1b917e27817b923ea2c786313620845 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 23 Mar 2010 20:22:13 +0100 Subject: IXP4xx: HW pseudo-random generator is available on IXP45x/46x only. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/drivers/char/hw_random/Kconfig b/drivers/char/hw_random/Kconfig index fbd9b2b..c58ea9b 100644 --- a/drivers/char/hw_random/Kconfig +++ b/drivers/char/hw_random/Kconfig @@ -127,12 +127,12 @@ config HW_RANDOM_VIA If unsure, say Y. config HW_RANDOM_IXP4XX - tristate "Intel IXP4xx NPU HW Random Number Generator support" + tristate "Intel IXP4xx NPU HW Pseudo-Random Number Generator support" depends on HW_RANDOM && ARCH_IXP4XX default HW_RANDOM ---help--- - This driver provides kernel-side support for the Random - Number Generator hardware found on the Intel IXP4xx NPU. + This driver provides kernel-side support for the Pseudo-Random + Number Generator hardware found on the Intel IXP45x/46x NPU. To compile this driver as a module, choose M here: the module will be called ixp4xx-rng. diff --git a/drivers/char/hw_random/ixp4xx-rng.c b/drivers/char/hw_random/ixp4xx-rng.c index 263567f..beec162 100644 --- a/drivers/char/hw_random/ixp4xx-rng.c +++ b/drivers/char/hw_random/ixp4xx-rng.c @@ -45,6 +45,9 @@ static int __init ixp4xx_rng_init(void) void __iomem * rng_base; int err; + if (!cpu_is_ixp46x()) /* includes IXP455 */ + return -ENOSYS; + rng_base = ioremap(0x70002100, 4); if (!rng_base) return -ENOMEM; @@ -68,5 +71,5 @@ module_init(ixp4xx_rng_init); module_exit(ixp4xx_rng_exit); MODULE_AUTHOR("Deepak Saxena "); -MODULE_DESCRIPTION("H/W Random Number Generator (RNG) driver for IXP4xx"); +MODULE_DESCRIPTION("H/W Pseudo-Random Number Generator (RNG) driver for IXP45x/46x"); MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 9665c52b102504399a9f041b85ff9f47c5d56bb3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Thu, 25 Mar 2010 23:56:05 +0100 Subject: IXP4xx: ixp4xx_crypto driver requires Queue Manager and NPE drivers. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig index 308c7fb..f6644f5 100644 --- a/drivers/crypto/Kconfig +++ b/drivers/crypto/Kconfig @@ -224,7 +224,7 @@ config CRYPTO_DEV_TALITOS config CRYPTO_DEV_IXP4XX tristate "Driver for IXP4xx crypto hardware acceleration" - depends on ARCH_IXP4XX + depends on ARCH_IXP4XX && IXP4XX_QMGR && IXP4XX_NPE select CRYPTO_DES select CRYPTO_ALGAPI select CRYPTO_AUTHENC -- cgit v0.10.2 From f203bc64e8b7d19ca52df89b142005c5552fef3f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Sun, 17 Apr 2011 21:06:06 +0200 Subject: IXP4xx: Remove time limit for PCI TRDY to enable use of slow devices. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/arch/arm/mach-ixp4xx/common-pci.c b/arch/arm/mach-ixp4xx/common-pci.c index 1694f01..6d6bde3 100644 --- a/arch/arm/mach-ixp4xx/common-pci.c +++ b/arch/arm/mach-ixp4xx/common-pci.c @@ -410,6 +410,7 @@ void __init ixp4xx_pci_preinit(void) * Enable the IO window to be way up high, at 0xfffffc00 */ local_write_config(PCI_BASE_ADDRESS_5, 4, 0xfffffc01); + local_write_config(0x40, 4, 0x000080FF); /* No TRDY time limit */ } else { printk("PCI: IXP4xx is target - No bus scan performed\n"); } -- cgit v0.10.2 From 4d18dea51036c673795eb9510fd8d70dcf214414 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 1 May 2012 20:47:12 +0200 Subject: WAN: Remove redundant HDLC info printed by IXP4xx HSS driver. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c index 3f575af..0fe36d7 100644 --- a/drivers/net/wan/ixp4xx_hss.c +++ b/drivers/net/wan/ixp4xx_hss.c @@ -1363,7 +1363,7 @@ static int __devinit hss_init_one(struct platform_device *pdev) platform_set_drvdata(pdev, port); - netdev_info(dev, "HSS-%i\n", port->id); + netdev_info(dev, "initialized\n"); return 0; err_free_netdev: -- cgit v0.10.2 From 9792eb1d7296ad4e19c3219dabf65efd01562a73 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Tue, 28 Dec 2010 13:08:18 +0100 Subject: IXP4xx crypto: MOD_AES{128,192,256} already include key size. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c index 8f3f74c..21180d6 100644 --- a/drivers/crypto/ixp4xx_crypto.c +++ b/drivers/crypto/ixp4xx_crypto.c @@ -750,12 +750,12 @@ static int setup_cipher(struct crypto_tfm *tfm, int encrypt, } if (cipher_cfg & MOD_AES) { switch (key_len) { - case 16: keylen_cfg = MOD_AES128 | KEYLEN_128; break; - case 24: keylen_cfg = MOD_AES192 | KEYLEN_192; break; - case 32: keylen_cfg = MOD_AES256 | KEYLEN_256; break; - default: - *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; - return -EINVAL; + case 16: keylen_cfg = MOD_AES128; break; + case 24: keylen_cfg = MOD_AES192; break; + case 32: keylen_cfg = MOD_AES256; break; + default: + *flags |= CRYPTO_TFM_RES_BAD_KEY_LEN; + return -EINVAL; } cipher_cfg |= keylen_cfg; } else if (cipher_cfg & MOD_3DES) { -- cgit v0.10.2 From 05cd3db0df6f6ac3083a9e9671dd1662053604df Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Wed, 25 Jul 2012 12:33:06 -0600 Subject: ixp4xx: Declare MODULE_FIRMWARE usage MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Cc: Krzysztof Halasa Cc: Imre Kaloz Cc: Russell King Cc: linux-arm-kernel@lists.infradead.org Signed-off-by: Tim Gardner Signed-off-by: Krzysztof Hałasa diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c index a17ed79..d4eb09a 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c @@ -116,7 +116,11 @@ /* NPE mailbox_status value for reset */ #define RESET_MBOX_STAT 0x0000F0F0 -const char *npe_names[] = { "NPE-A", "NPE-B", "NPE-C" }; +#define NPE_A_FIRMWARE "NPE-A" +#define NPE_B_FIRMWARE "NPE-B" +#define NPE_C_FIRMWARE "NPE-C" + +const char *npe_names[] = { NPE_A_FIRMWARE, NPE_B_FIRMWARE, NPE_C_FIRMWARE }; #define print_npe(pri, npe, fmt, ...) \ printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__) @@ -724,6 +728,9 @@ module_exit(npe_cleanup_module); MODULE_AUTHOR("Krzysztof Halasa"); MODULE_LICENSE("GPL v2"); +MODULE_FIRMWARE(NPE_A_FIRMWARE); +MODULE_FIRMWARE(NPE_B_FIRMWARE); +MODULE_FIRMWARE(NPE_C_FIRMWARE); EXPORT_SYMBOL(npe_names); EXPORT_SYMBOL(npe_running); -- cgit v0.10.2 From f0cdb153292635203b3a0921c901dacf85d4ef1b Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Fri, 26 Mar 2010 16:38:52 +0100 Subject: IXP4xx: Always ioremap() Queue Manager MMIO region at boot. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit It doesn't make much sense to map QMgr dynamically - we almost always need it and the static mapping will be needed for little-endian data-coherent operation (to make QMgr region value-coherent). Signed-off-by: Krzysztof Hałasa diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index fdf91a1..acc0584 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -67,6 +67,11 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .pfn = __phys_to_pfn(IXP4XX_PCI_CFG_BASE_PHYS), .length = IXP4XX_PCI_CFG_REGION_SIZE, .type = MT_DEVICE + }, { /* Queue Manager */ + .virtual = (unsigned long)IXP4XX_QMGR_BASE_VIRT, + .pfn = __phys_to_pfn(IXP4XX_QMGR_BASE_PHYS), + .length = IXP4XX_QMGR_REGION_SIZE, + .type = MT_DEVICE }, #ifdef CONFIG_DEBUG_LL { /* Debug UART mapping */ diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index eb68b61..a24a8fe 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -30,19 +30,20 @@ * * 0x50000000 0x10000000 ioremap'd EXP BUS * - * 0x6000000 0x00004000 ioremap'd QMgr + * 0x60000000 0x00004000 0xffbe7000 QMgr * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG + * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals * * 0xC4000000 0x00001000 0xffbfe000 EXP CFG * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals + * 0xC0000000 0x00001000 0xffbff000 PCI CFG */ /* * Queue Manager */ #define IXP4XX_QMGR_BASE_PHYS (0x60000000) +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFFBE7000) #define IXP4XX_QMGR_REGION_SIZE (0x00004000) /* diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 9e7cad2..0a88d3b 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue); static inline void qmgr_put_entry(unsigned int queue, u32 val) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val) static inline u32 qmgr_get_entry(unsigned int queue) { u32 val; - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; val = __raw_readl(&qmgr_regs->acc[queue][0]); #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue) static inline int __qmgr_get_stat1(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } static inline int __qmgr_get_stat2(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; @@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue) */ static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statne_h) >> (queue - HALF_QUEUES)) & 0x01; @@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue) */ static inline int qmgr_stat_full(unsigned int queue) { - extern struct qmgr_regs __iomem *qmgr_regs; + const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statf_h) >> (queue - HALF_QUEUES)) & 0x01; diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index 852f7c9..7c0584e 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -14,7 +14,7 @@ #include #include -struct qmgr_regs __iomem *qmgr_regs; +static const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ @@ -32,7 +32,7 @@ void qmgr_set_irq(unsigned int queue, int src, spin_lock_irqsave(&qmgr_lock, flags); if (queue < HALF_QUEUES) { - u32 __iomem *reg; + const u32 __iomem *reg; int bit; BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ @@ -293,12 +293,6 @@ static int qmgr_init(void) if (mem_res == NULL) return -EBUSY; - qmgr_regs = ioremap(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); - if (qmgr_regs == NULL) { - err = -ENOMEM; - goto error_map; - } - /* reset qmgr registers */ for (i = 0; i < 4; i++) { __raw_writel(0x33333333, &qmgr_regs->stat1[i]); @@ -347,8 +341,6 @@ static int qmgr_init(void) error_irq2: free_irq(IRQ_IXP4XX_QM1, NULL); error_irq: - iounmap(qmgr_regs); -error_map: release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); return err; } @@ -359,7 +351,6 @@ static void qmgr_remove(void) free_irq(IRQ_IXP4XX_QM2, NULL); synchronize_irq(IRQ_IXP4XX_QM1); synchronize_irq(IRQ_IXP4XX_QM2); - iounmap(qmgr_regs); release_mem_region(IXP4XX_QMGR_BASE_PHYS, IXP4XX_QMGR_REGION_SIZE); } @@ -369,7 +360,6 @@ module_exit(qmgr_remove); MODULE_LICENSE("GPL v2"); MODULE_AUTHOR("Krzysztof Halasa"); -EXPORT_SYMBOL(qmgr_regs); EXPORT_SYMBOL(qmgr_set_irq); EXPORT_SYMBOL(qmgr_enable_irq); EXPORT_SYMBOL(qmgr_disable_irq); -- cgit v0.10.2 From b7b23db72f9a79e6ed0bcfb75d73b29f8e03fe62 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Krzysztof=20Ha=C5=82asa?= Date: Sun, 2 Sep 2012 00:50:39 +0200 Subject: IXP4xx: map CPU config registers within VMALLOC region. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Krzysztof Hałasa diff --git a/arch/arm/mach-ixp4xx/common.c b/arch/arm/mach-ixp4xx/common.c index acc0584..8c0c0e2 100644 --- a/arch/arm/mach-ixp4xx/common.c +++ b/arch/arm/mach-ixp4xx/common.c @@ -73,14 +73,6 @@ static struct map_desc ixp4xx_io_desc[] __initdata = { .length = IXP4XX_QMGR_REGION_SIZE, .type = MT_DEVICE }, -#ifdef CONFIG_DEBUG_LL - { /* Debug UART mapping */ - .virtual = (unsigned long)IXP4XX_DEBUG_UART_BASE_VIRT, - .pfn = __phys_to_pfn(IXP4XX_DEBUG_UART_BASE_PHYS), - .length = IXP4XX_DEBUG_UART_REGION_SIZE, - .type = MT_DEVICE - } -#endif }; void __init ixp4xx_map_io(void) diff --git a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S index 8c9f8d5..ff686cb 100644 --- a/arch/arm/mach-ixp4xx/include/mach/debug-macro.S +++ b/arch/arm/mach-ixp4xx/include/mach/debug-macro.S @@ -17,8 +17,8 @@ #else mov \rp, #0 #endif - orr \rv, \rp, #0xff000000 @ virtual - orr \rv, \rv, #0x00b00000 + orr \rv, \rp, #0xfe000000 @ virtual + orr \rv, \rv, #0x00f00000 orr \rp, \rp, #0xc8000000 @ physical .endm diff --git a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h index a24a8fe..c5bae9c 100644 --- a/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h +++ b/arch/arm/mach-ixp4xx/include/mach/ixp4xx-regs.h @@ -30,52 +30,43 @@ * * 0x50000000 0x10000000 ioremap'd EXP BUS * - * 0x60000000 0x00004000 0xffbe7000 QMgr + * 0xC8000000 0x00013000 0xFEF00000 On-Chip Peripherals * - * 0xC8000000 0x00013000 0xffbeb000 On-Chip Peripherals + * 0xC0000000 0x00001000 0xFEF13000 PCI CFG * - * 0xC4000000 0x00001000 0xffbfe000 EXP CFG + * 0xC4000000 0x00001000 0xFEF14000 EXP CFG * - * 0xC0000000 0x00001000 0xffbff000 PCI CFG + * 0x60000000 0x00004000 0xFEF15000 QMgr */ /* * Queue Manager */ -#define IXP4XX_QMGR_BASE_PHYS (0x60000000) -#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFFBE7000) -#define IXP4XX_QMGR_REGION_SIZE (0x00004000) +#define IXP4XX_QMGR_BASE_PHYS 0x60000000 +#define IXP4XX_QMGR_BASE_VIRT IOMEM(0xFEF15000) +#define IXP4XX_QMGR_REGION_SIZE 0x00004000 /* - * Expansion BUS Configuration registers + * Peripheral space, including debug UART. Must be section-aligned so that + * it can be used with the low-level debug code. */ -#define IXP4XX_EXP_CFG_BASE_PHYS (0xC4000000) -#define IXP4XX_EXP_CFG_BASE_VIRT IOMEM(0xFFBFE000) -#define IXP4XX_EXP_CFG_REGION_SIZE (0x00001000) +#define IXP4XX_PERIPHERAL_BASE_PHYS 0xC8000000 +#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFEF00000) +#define IXP4XX_PERIPHERAL_REGION_SIZE 0x00013000 /* * PCI Config registers */ -#define IXP4XX_PCI_CFG_BASE_PHYS (0xC0000000) -#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFFBFF000) -#define IXP4XX_PCI_CFG_REGION_SIZE (0x00001000) - -/* - * Peripheral space - */ -#define IXP4XX_PERIPHERAL_BASE_PHYS (0xC8000000) -#define IXP4XX_PERIPHERAL_BASE_VIRT IOMEM(0xFFBEB000) -#define IXP4XX_PERIPHERAL_REGION_SIZE (0x00013000) +#define IXP4XX_PCI_CFG_BASE_PHYS 0xC0000000 +#define IXP4XX_PCI_CFG_BASE_VIRT IOMEM(0xFEF13000) +#define IXP4XX_PCI_CFG_REGION_SIZE 0x00001000 /* - * Debug UART - * - * This is basically a remap of UART1 into a region that is section - * aligned so that it * can be used with the low-level debug code. + * Expansion BUS Configuration registers */ -#define IXP4XX_DEBUG_UART_BASE_PHYS (0xC8000000) -#define IXP4XX_DEBUG_UART_BASE_VIRT IOMEM(0xffb00000) -#define IXP4XX_DEBUG_UART_REGION_SIZE (0x00001000) +#define IXP4XX_EXP_CFG_BASE_PHYS 0xC4000000 +#define IXP4XX_EXP_CFG_BASE_VIRT 0xFEF14000 +#define IXP4XX_EXP_CFG_REGION_SIZE 0x00001000 #define IXP4XX_EXP_CS0_OFFSET 0x00 #define IXP4XX_EXP_CS1_OFFSET 0x04 -- cgit v0.10.2 From 0d2c9f0517e915ce03a04e91d3207827e0d274a8 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Fri, 28 Sep 2012 23:36:10 +0200 Subject: IXP4xx: use __iomem for MMIO MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The ixp4xx queue manager uses "const struct qmgr_regs __iomem *" as the type for a pointer that is passed to __raw_writel, which is not allowed because of the const-ness. Dropping the 'const' keyword fixes the problem. While we're here, let's also drop the useless type cast. Without this patch, building ixp4xx_defconfig results in: In file included from arch/arm/mach-ixp4xx/ixp4xx_qmgr.c:15:0: arch/arm/mach-ixp4xx/include/mach/qmgr.h: In function 'qmgr_put_entry': arch/arm/mach-ixp4xx/include/mach/qmgr.h:96:2: warning: passing argument 2 of '__raw_writel' discards 'const' qualifier from pointer target type [enabled by default] arch/arm/include/asm/io.h:88:91: note: expected 'volatile void *' but argument is of type 'const u32 *' In file included from drivers/net/ethernet/xscale/ixp4xx_eth.c:41:0: arch/arm/mach-ixp4xx/include/mach/qmgr.h: In function 'qmgr_put_entry': arch/arm/mach-ixp4xx/include/mach/qmgr.h:96:2: warning: passing argument 2 of '__raw_writel' discards 'const' qualifier from pointer target type [enabled by default] arch/arm/include/asm/io.h:88:91: note: expected 'volatile void *' but argument is of type 'const u32 *' arch/arm/mach-ixp4xx/ixp4xx_qmgr.c: In function 'qmgr_set_irq': arch/arm/mach-ixp4xx/ixp4xx_qmgr.c:41:9: warning: passing argument 2 of '__raw_writel' discards 'const' qualifier from pointer target type [enabled by default] arch/arm/include/asm/io.h:88:91: note: expected 'volatile void *' but argument is of type 'const u32 *' Signed-off-by: Arnd Bergmann Signed-off-by: Krzysztof Hałasa diff --git a/arch/arm/mach-ixp4xx/include/mach/qmgr.h b/arch/arm/mach-ixp4xx/include/mach/qmgr.h index 0a88d3b..4de8da5 100644 --- a/arch/arm/mach-ixp4xx/include/mach/qmgr.h +++ b/arch/arm/mach-ixp4xx/include/mach/qmgr.h @@ -86,7 +86,7 @@ void qmgr_release_queue(unsigned int queue); static inline void qmgr_put_entry(unsigned int queue, u32 val) { - const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; + struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -99,7 +99,7 @@ static inline void qmgr_put_entry(unsigned int queue, u32 val) static inline u32 qmgr_get_entry(unsigned int queue) { u32 val; - const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; val = __raw_readl(&qmgr_regs->acc[queue][0]); #if DEBUG_QMGR BUG_ON(!qmgr_queue_descs[queue]); /* not yet requested */ @@ -112,14 +112,14 @@ static inline u32 qmgr_get_entry(unsigned int queue) static inline int __qmgr_get_stat1(unsigned int queue) { - const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; return (__raw_readl(&qmgr_regs->stat1[queue >> 3]) >> ((queue & 7) << 2)) & 0xF; } static inline int __qmgr_get_stat2(unsigned int queue) { - const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; BUG_ON(queue >= HALF_QUEUES); return (__raw_readl(&qmgr_regs->stat2[queue >> 4]) >> ((queue & 0xF) << 1)) & 0x3; @@ -145,7 +145,7 @@ static inline int qmgr_stat_empty(unsigned int queue) */ static inline int qmgr_stat_below_low_watermark(unsigned int queue) { - const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statne_h) >> (queue - HALF_QUEUES)) & 0x01; @@ -172,7 +172,7 @@ static inline int qmgr_stat_above_high_watermark(unsigned int queue) */ static inline int qmgr_stat_full(unsigned int queue) { - const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; + const struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; if (queue >= HALF_QUEUES) return (__raw_readl(&qmgr_regs->statf_h) >> (queue - HALF_QUEUES)) & 0x01; diff --git a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c index 7c0584e..9d1b6b7 100644 --- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c +++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c @@ -14,7 +14,7 @@ #include #include -static const struct qmgr_regs __iomem *qmgr_regs = (void __iomem *)IXP4XX_QMGR_BASE_VIRT; +static struct qmgr_regs __iomem *qmgr_regs = IXP4XX_QMGR_BASE_VIRT; static struct resource *mem_res; static spinlock_t qmgr_lock; static u32 used_sram_bitmap[4]; /* 128 16-dword pages */ @@ -32,7 +32,7 @@ void qmgr_set_irq(unsigned int queue, int src, spin_lock_irqsave(&qmgr_lock, flags); if (queue < HALF_QUEUES) { - const u32 __iomem *reg; + u32 __iomem *reg; int bit; BUG_ON(src > QUEUE_IRQ_SRC_NOT_FULL); reg = &qmgr_regs->irqsrc[queue >> 3]; /* 8 queues per u32 */ -- cgit v0.10.2 From 129495dee5e1b76e8c8bf342c0f7ad18544d79a9 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Fri, 9 Nov 2012 16:41:29 +0900 Subject: drm/exynos: fix linux framebuffer address setting. With iommu, buffer->dma_addr has device addres so this patch fixes for physical address to be set to fix.smem_start always. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c index 67eb6ba..e7466c4 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fbdev.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fbdev.c @@ -87,7 +87,8 @@ static int exynos_drm_fbdev_update(struct drm_fb_helper *helper, dev->mode_config.fb_base = (resource_size_t)buffer->dma_addr; fbi->screen_base = buffer->kvaddr + offset; - fbi->fix.smem_start = (unsigned long)(buffer->dma_addr + offset); + fbi->fix.smem_start = (unsigned long)(page_to_phys(buffer->pages[0]) + + offset); fbi->screen_size = size; fbi->fix.smem_len = size; -- cgit v0.10.2 From a39b49812fe0c3f62fd3f7f6ec8c10d8f7035992 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 14 Nov 2012 17:28:36 +0900 Subject: drm/exynos: remove unnecessary code. plane->fb will be set to new fb after update_plane callback is called by drm_mode_set_plane() Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_plane.c b/drivers/gpu/drm/exynos/exynos_drm_plane.c index 60b877a..862ca1e 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_plane.c +++ b/drivers/gpu/drm/exynos/exynos_drm_plane.c @@ -204,7 +204,6 @@ exynos_update_plane(struct drm_plane *plane, struct drm_crtc *crtc, return ret; plane->crtc = crtc; - plane->fb = crtc->fb; exynos_plane_commit(plane); exynos_plane_dpms(plane, DRM_MODE_DPMS_ON); -- cgit v0.10.2 From ffe9955a741a2742cc517245b2219b61cc6dde28 Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 14 Nov 2012 20:41:35 +0900 Subject: drm/exynos: fix overlay updating issue Chagelog v2: Move encoder's dpms updating into exynos_drm_encoder_commit function because when crtc's dpms is updated, encoder's dpms is updated also. This would induce the issue that encoder isn't disabled after crtc is disabled. Changelog v1: This patch fixes a issue that overlay data aren't applied to real hardware when dpms off goes to on after setcrtc was requested like below, dpms off -> setcrtc -> dpms off -> dpms on For this, it makes encoder's dpms to be updated when setcrtc is requested. Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 241ad1e..607231a 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -226,6 +226,12 @@ static void exynos_drm_encoder_commit(struct drm_encoder *encoder) * already updated or not by exynos_drm_encoder_dpms function. */ exynos_encoder->updated = true; + + /* + * In case of setcrtc, there is no way to update encoder's dpms + * so update it here. + */ + exynos_encoder->dpms = DRM_MODE_DPMS_ON; } static void exynos_drm_encoder_disable(struct drm_encoder *encoder) -- cgit v0.10.2 From 77b1c0362ffdb11128590a7248f3f8c434ab42f2 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 19 Nov 2012 15:22:54 +0530 Subject: drm/exynos: Make exynos4/5_fimd_driver_data static Fixes the following sparse warnings: drivers/gpu/drm/exynos/exynos_drm_fimd.c:65:25: warning: symbol 'exynos4_fimd_driver_data' was not declared. Should it be static? drivers/gpu/drm/exynos/exynos_drm_fimd.c:69:25: warning: symbol 'exynos5_fimd_driver_data' was not declared. Should it be static? Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_fimd.c b/drivers/gpu/drm/exynos/exynos_drm_fimd.c index 130a2b5..e08478f 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_fimd.c +++ b/drivers/gpu/drm/exynos/exynos_drm_fimd.c @@ -61,11 +61,11 @@ struct fimd_driver_data { unsigned int timing_base; }; -struct fimd_driver_data exynos4_fimd_driver_data = { +static struct fimd_driver_data exynos4_fimd_driver_data = { .timing_base = 0x0, }; -struct fimd_driver_data exynos5_fimd_driver_data = { +static struct fimd_driver_data exynos5_fimd_driver_data = { .timing_base = 0x20000, }; -- cgit v0.10.2 From c69d5276704e1a9c771de57c0a2e7b69ea3ea578 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Mon, 19 Nov 2012 14:50:30 +0530 Subject: drm/exynos: Fix potential NULL pointer dereference in exynos_drm_encoder.c Check overlay_ops is not NULL as checked in the previous 'if' condition. Fixes the following smatch error: drivers/gpu/drm/exynos/exynos_drm_encoder.c:509 exynos_drm_encoder_plane_disable() error: we previously assumed 'overlay_ops' could be null (see line 499) Signed-off-by: Sachin Kamat Signed-off-by: Inki Dae Signed-off-by: Kyungmin Park diff --git a/drivers/gpu/drm/exynos/exynos_drm_encoder.c b/drivers/gpu/drm/exynos/exynos_drm_encoder.c index 607231a..f2df06c 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_encoder.c +++ b/drivers/gpu/drm/exynos/exynos_drm_encoder.c @@ -513,6 +513,6 @@ void exynos_drm_encoder_plane_disable(struct drm_encoder *encoder, void *data) * because the setting for disabling the overlay will be updated * at vsync. */ - if (overlay_ops->wait_for_vblank) + if (overlay_ops && overlay_ops->wait_for_vblank) overlay_ops->wait_for_vblank(manager->dev); } -- cgit v0.10.2 From 17803580ace1953e78a995423f4945f77f0deb80 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:28:58 -0300 Subject: [media] media: sh_vou: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in sh_vou. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/sh_vou.c b/drivers/media/platform/sh_vou.c index 85fd312..a1c87f0 100644 --- a/drivers/media/platform/sh_vou.c +++ b/drivers/media/platform/sh_vou.c @@ -935,9 +935,10 @@ static int sh_vou_g_crop(struct file *file, void *fh, struct v4l2_crop *a) /* Assume a dull encoder, do all the work ourselves. */ static int sh_vou_s_crop(struct file *file, void *fh, const struct v4l2_crop *a) { + struct v4l2_crop a_writable = *a; struct video_device *vdev = video_devdata(file); struct sh_vou_device *vou_dev = video_get_drvdata(vdev); - struct v4l2_rect *rect = &a->c; + struct v4l2_rect *rect = &a_writable.c; struct v4l2_crop sd_crop = {.type = V4L2_BUF_TYPE_VIDEO_OUTPUT}; struct v4l2_pix_format *pix = &vou_dev->pix; struct sh_vou_geometry geo; -- cgit v0.10.2 From 3ecb091e8827b4939b917139f4a86a66d36ed7e1 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 06:59:58 -0300 Subject: [media] media: sh_mobile_ceu_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in sh_mobile_ceu_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c index 0a24253..2d8861c 100644 --- a/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c +++ b/drivers/media/platform/soc_camera/sh_mobile_ceu_camera.c @@ -1182,13 +1182,13 @@ static void sh_mobile_ceu_put_formats(struct soc_camera_device *icd) } /* Check if any dimension of r1 is smaller than respective one of r2 */ -static bool is_smaller(struct v4l2_rect *r1, struct v4l2_rect *r2) +static bool is_smaller(const struct v4l2_rect *r1, const struct v4l2_rect *r2) { return r1->width < r2->width || r1->height < r2->height; } /* Check if r1 fails to cover r2 */ -static bool is_inside(struct v4l2_rect *r1, struct v4l2_rect *r2) +static bool is_inside(const struct v4l2_rect *r1, const struct v4l2_rect *r2) { return r1->left > r2->left || r1->top > r2->top || r1->left + r1->width < r2->left + r2->width || @@ -1263,7 +1263,7 @@ static void update_subrect(struct sh_mobile_ceu_cam *cam) * 3. if (2) failed, try to request the maximum image */ static int client_s_crop(struct soc_camera_device *icd, struct v4l2_crop *crop, - const struct v4l2_crop *cam_crop) + struct v4l2_crop *cam_crop) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct v4l2_rect *rect = &crop->c, *cam_rect = &cam_crop->c; @@ -1519,7 +1519,8 @@ static int client_scale(struct soc_camera_device *icd, static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_crop a_writable = *a; + const struct v4l2_rect *rect = &a_writable.c; struct device *dev = icd->parent; struct soc_camera_host *ici = to_soc_camera_host(dev); struct sh_mobile_ceu_dev *pcdev = ici->priv; @@ -1545,7 +1546,7 @@ static int sh_mobile_ceu_set_crop(struct soc_camera_device *icd, * 1. - 2. Apply iterative camera S_CROP for new input window, read back * actual camera rectangle. */ - ret = client_s_crop(icd, a, &cam_crop); + ret = client_s_crop(icd, &a_writable, &cam_crop); if (ret < 0) return ret; @@ -1946,7 +1947,7 @@ static int sh_mobile_ceu_try_fmt(struct soc_camera_device *icd, } static int sh_mobile_ceu_set_livecrop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct soc_camera_host *ici = to_soc_camera_host(icd->parent); -- cgit v0.10.2 From 448a61f09e319c54bf149a20d9c8f63d5242a936 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:27:30 -0300 Subject: [media] media: pxa_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in pxa_camera.c. Fix them by adjusting a function declaration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/pxa_camera.c b/drivers/media/platform/soc_camera/pxa_camera.c index 1e3776d..3434ffe 100644 --- a/drivers/media/platform/soc_camera/pxa_camera.c +++ b/drivers/media/platform/soc_camera/pxa_camera.c @@ -1337,9 +1337,9 @@ static int pxa_camera_check_frame(u32 width, u32 height) } static int pxa_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + const struct v4l2_rect *rect = &a->c; struct device *dev = icd->parent; struct soc_camera_host *ici = to_soc_camera_host(dev); struct pxa_camera_dev *pcdev = ici->priv; -- cgit v0.10.2 From 60cd1ee17d9d91aeaa4224a15595dd27163ac57d Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:39:06 -0300 Subject: [media] media: mx3_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in mx3_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/mx3_camera.c b/drivers/media/platform/soc_camera/mx3_camera.c index 3557ac9..261f6e9 100644 --- a/drivers/media/platform/soc_camera/mx3_camera.c +++ b/drivers/media/platform/soc_camera/mx3_camera.c @@ -799,9 +799,10 @@ static inline void stride_align(__u32 *width) * default g_crop and cropcap from soc_camera.c */ static int mx3_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_crop a_writable = *a; + struct v4l2_rect *rect = &a_writable.c; struct soc_camera_host *ici = to_soc_camera_host(icd->parent); struct mx3_camera_dev *mx3_cam = ici->priv; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); -- cgit v0.10.2 From d63bb2790c0e1c44434cb2cc5292cd23d25d4ca5 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:46:52 -0300 Subject: [media] media: mx2_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in mx2_camera. Fix them by cleanly separating writable and read-only variables in cropping operations. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index 9fd9d1c..f36b362 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -1099,9 +1099,10 @@ static int mx2_camera_set_bus_param(struct soc_camera_device *icd) } static int mx2_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) + const struct v4l2_crop *a) { - struct v4l2_rect *rect = &a->c; + struct v4l2_crop a_writable = *a; + struct v4l2_rect *rect = &a_writable.c; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct v4l2_mbus_framefmt mf; int ret; -- cgit v0.10.2 From 5c111913347e60c364776824e1ed766dd8958ffa Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:48:26 -0300 Subject: [media] media: mx1_camera: use the default .set_crop() implementation .set_crop() implementation in mx1_camera is identical with the default. Remove the copy to switch to using the default stab. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/mx1_camera.c b/drivers/media/platform/soc_camera/mx1_camera.c index bbe7099..032b8c9 100644 --- a/drivers/media/platform/soc_camera/mx1_camera.c +++ b/drivers/media/platform/soc_camera/mx1_camera.c @@ -470,14 +470,6 @@ static void mx1_camera_remove_device(struct soc_camera_device *icd) pcdev->icd = NULL; } -static int mx1_camera_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *a) -{ - struct v4l2_subdev *sd = soc_camera_to_subdev(icd); - - return v4l2_subdev_call(sd, video, s_crop, a); -} - static int mx1_camera_set_bus_param(struct soc_camera_device *icd) { struct v4l2_subdev *sd = soc_camera_to_subdev(icd); @@ -689,7 +681,6 @@ static struct soc_camera_host_ops mx1_soc_camera_host_ops = { .add = mx1_camera_add_device, .remove = mx1_camera_remove_device, .set_bus_param = mx1_camera_set_bus_param, - .set_crop = mx1_camera_set_crop, .set_fmt = mx1_camera_set_fmt, .try_fmt = mx1_camera_try_fmt, .init_videobuf = mx1_camera_init_videobuf, -- cgit v0.10.2 From 6a3082adc85a3acc9258ad2e4858abc55be9b514 Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Fri, 28 Sep 2012 07:57:17 -0300 Subject: [media] media: omap1_camera: fix const cropping related warnings A recent commit "[media] v4l2: make vidioc_s_crop const" introduced warnings in omap1_camera. Fix them by adjusting a function declaration. Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/omap1_camera.c b/drivers/media/platform/soc_camera/omap1_camera.c index fa08c76..13636a5 100644 --- a/drivers/media/platform/soc_camera/omap1_camera.c +++ b/drivers/media/platform/soc_camera/omap1_camera.c @@ -1215,9 +1215,9 @@ static int set_mbus_format(struct omap1_cam_dev *pcdev, struct device *dev, } static int omap1_cam_set_crop(struct soc_camera_device *icd, - struct v4l2_crop *crop) + const struct v4l2_crop *crop) { - struct v4l2_rect *rect = &crop->c; + const struct v4l2_rect *rect = &crop->c; const struct soc_camera_format_xlate *xlate = icd->current_fmt; struct v4l2_subdev *sd = soc_camera_to_subdev(icd); struct device *dev = icd->parent; -- cgit v0.10.2 From f1ccccaf23132a2eda036dd3978ebe3f020c5af9 Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 22 Oct 2012 02:27:28 -0300 Subject: [media] mx2_camera: fix missing unlock on error in mx2_start_streaming() Add the missing unlock on the error handle path in function mx2_start_streaming(). Signed-off-by: Wei Yongjun Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/soc_camera/mx2_camera.c b/drivers/media/platform/soc_camera/mx2_camera.c index f36b362..9a55f4c 100644 --- a/drivers/media/platform/soc_camera/mx2_camera.c +++ b/drivers/media/platform/soc_camera/mx2_camera.c @@ -864,8 +864,10 @@ static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) bytesperline = soc_mbus_bytes_per_line(icd->user_width, icd->current_fmt->host_fmt); - if (bytesperline < 0) + if (bytesperline < 0) { + spin_unlock_irqrestore(&pcdev->lock, flags); return bytesperline; + } /* * I didn't manage to properly enable/disable the prp @@ -878,8 +880,10 @@ static int mx2_start_streaming(struct vb2_queue *q, unsigned int count) pcdev->discard_buffer = dma_alloc_coherent(ici->v4l2_dev.dev, pcdev->discard_size, &pcdev->discard_buffer_dma, GFP_KERNEL); - if (!pcdev->discard_buffer) + if (!pcdev->discard_buffer) { + spin_unlock_irqrestore(&pcdev->lock, flags); return -ENOMEM; + } pcdev->buf_discard[0].discard = true; list_add_tail(&pcdev->buf_discard[0].queue, -- cgit v0.10.2 From 9bb047cd1a7efc162205ce48013ef3a2287b0e9f Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Thu, 27 Sep 2012 19:04:34 -0300 Subject: [media] mt9v022: fix the V4L2_CID_EXPOSURE control Since the MT9V022_TOTAL_SHUTTER_WIDTH register is controlled in manual mode by V4L2_CID_EXPOSURE control, it shouldn't be written directly in mt9v022_s_crop(). In manual mode this register should be set to the V4L2_CID_EXPOSURE control value. Changing this register directly and outside of the actual control function means that the register value is not in sync with the corresponding control value. Thus, the following problem is observed: - setting this control initially succeeds - VIDIOC_S_CROP ioctl() overwrites the MT9V022_TOTAL_SHUTTER_WIDTH register - setting this control to the same value again doesn't result in setting the register since the control value was previously cached and doesn't differ Remove MT9V022_TOTAL_SHUTTER_WIDTH register setting in mt9v022_s_crop() and add a comment explaining why it is not needed in manual mode. Signed-off-by: Anatolij Gustschin Signed-off-by: Guennadi Liakhovetski Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/i2c/soc_camera/mt9v022.c b/drivers/media/i2c/soc_camera/mt9v022.c index 13057b9..333ef17 100644 --- a/drivers/media/i2c/soc_camera/mt9v022.c +++ b/drivers/media/i2c/soc_camera/mt9v022.c @@ -263,9 +263,14 @@ static int mt9v022_s_crop(struct v4l2_subdev *sd, const struct v4l2_crop *a) if (ret & 1) /* Autoexposure */ ret = reg_write(client, mt9v022->reg->max_total_shutter_width, rect.height + mt9v022->y_skip_top + 43); - else - ret = reg_write(client, MT9V022_TOTAL_SHUTTER_WIDTH, - rect.height + mt9v022->y_skip_top + 43); + /* + * If autoexposure is off, there is no need to set + * MT9V022_TOTAL_SHUTTER_WIDTH here. Autoexposure can be off + * only if the user has set exposure manually, using the + * V4L2_CID_EXPOSURE_AUTO with the value V4L2_EXPOSURE_MANUAL. + * In this case the register MT9V022_TOTAL_SHUTTER_WIDTH + * already contains the correct value. + */ } /* Setup frame format: defaults apart from width and height */ if (!ret) -- cgit v0.10.2 From 08e5727416840c4de8ec450064b131ddfb6ed838 Mon Sep 17 00:00:00 2001 From: Antti Palosaari Date: Tue, 6 Nov 2012 16:03:35 -0300 Subject: [media] rtl28xxu: 1d19:1102 Dexatek DK mini DVB-T Dongle Add new USB ID as driver supports it. Reported-by: Hubert Lin Tested-by: Hubert Lin Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index adabba8..0149cdd 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -1346,6 +1346,8 @@ static const struct usb_device_id rtl28xxu_id_table[] = { &rtl2832u_props, "DigitalNow Quad DVB-T Receiver", NULL) }, { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d3, &rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, + { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102, + &rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); -- cgit v0.10.2 From 86163adb8125a4ce85e0b23a50be82bd8c0daf95 Mon Sep 17 00:00:00 2001 From: Andrew Karpow Date: Tue, 6 Nov 2012 20:01:16 -0300 Subject: [media] rtl28xxu: 0ccd:00d7 TerraTec Cinergy T Stick+ added usb-id as driver supports the stick Signed-off-by: Andrew Karpow Signed-off-by: Antti Palosaari Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c index 0149cdd..093f1ac 100644 --- a/drivers/media/usb/dvb-usb-v2/rtl28xxu.c +++ b/drivers/media/usb/dvb-usb-v2/rtl28xxu.c @@ -1348,6 +1348,8 @@ static const struct usb_device_id rtl28xxu_id_table[] = { &rtl2832u_props, "TerraTec Cinergy T Stick RC (Rev. 3)", NULL) }, { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x1102, &rtl2832u_props, "Dexatek DK mini DVB-T Dongle", NULL) }, + { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00d7, + &rtl2832u_props, "TerraTec Cinergy T Stick+", NULL) }, { } }; MODULE_DEVICE_TABLE(usb, rtl28xxu_id_table); -- cgit v0.10.2 From 9a30a61f3516871c5c638fd7c025fbaa11ddf7fe Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Mon, 12 Nov 2012 14:33:45 +0200 Subject: drm/i915: do not default to 18 bpp for eDP if missing from VBT commit 500a8cc466a24e2fbc4c86ef9c6467ae2ffdeb0c Author: Zhenyu Wang Date: Wed Jan 13 11:19:52 2010 +0800 drm/i915: parse eDP panel color depth from VBT block originally introduced parsing bpp for eDP from VBT, with a default of 18 bpp if the eDP BIOS data block is not present. Turns out that default seems to break the Macbook Pro with retina display, as noted in commit 4344b813f105a19f793f1fd93ad775b784648b95 Author: Daniel Vetter Date: Fri Aug 10 11:10:20 2012 +0200 drm/i915: ignore eDP bpc settings from vbt Since we can't ignore bpc settings from VBT completely after all, get rid of the default. Do not clamp eDP to 18 bpp by default if the eDP BDB is missing from VBT. Signed-off-by: Jani Nikula Tested-by: Henrik Rydberg [danvet: paste in the updated commit message from irc.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_bios.c b/drivers/gpu/drm/i915/intel_bios.c index 0ed6baf..56846ed 100644 --- a/drivers/gpu/drm/i915/intel_bios.c +++ b/drivers/gpu/drm/i915/intel_bios.c @@ -499,12 +499,8 @@ parse_edp(struct drm_i915_private *dev_priv, struct bdb_header *bdb) edp = find_section(bdb, BDB_EDP); if (!edp) { - if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) { - DRM_DEBUG_KMS("No eDP BDB found but eDP panel " - "supported, assume %dbpp panel color " - "depth.\n", - dev_priv->edp.bpp); - } + if (SUPPORTS_EDP(dev_priv->dev) && dev_priv->edp.support) + DRM_DEBUG_KMS("No eDP BDB found but eDP panel supported.\n"); return; } @@ -657,9 +653,6 @@ init_vbt_defaults(struct drm_i915_private *dev_priv) dev_priv->lvds_use_ssc = 1; dev_priv->lvds_ssc_freq = intel_bios_ssc_frequency(dev, 1); DRM_DEBUG_KMS("Set default to SSC at %dMHz\n", dev_priv->lvds_ssc_freq); - - /* eDP data */ - dev_priv->edp.bpp = 18; } static int __init intel_no_opregion_vbt_callback(const struct dmi_system_id *id) diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index 4154bcd..b426d44 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -3845,7 +3845,7 @@ static bool intel_choose_pipe_bpp_dither(struct drm_crtc *crtc, /* Use VBT settings if we have an eDP panel */ unsigned int edp_bpc = dev_priv->edp.bpp / 3; - if (edp_bpc < display_bpc) { + if (edp_bpc && edp_bpc < display_bpc) { DRM_DEBUG_KMS("clamping display bpc (was %d) to eDP (%d)\n", display_bpc, edp_bpc); display_bpc = edp_bpc; } -- cgit v0.10.2 From 5010192d5ae589002c4453d6c6e662e5e9acae59 Mon Sep 17 00:00:00 2001 From: Dave Martin Date: Thu, 22 Nov 2012 12:50:43 +0100 Subject: ARM: 7583/1: decompressor: Enable unaligned memory access for v6 and above Modern GCC can generate code which makes use of the CPU's native unaligned memory access capabilities. This is useful for the C decompressor implementations used for unpacking compressed kernels. This patch disables alignment faults and enables the v6 unaligned access model on CPUs which support these features (i.e., v6 and later), allowing full unaligned access support for C code in the decompressor. The decompressor C code must not be built to assume that unaligned access works if support for v5 or older platforms is included in the kernel. For correct code generation, C decompressor code must always use the get_unaligned and put_unaligned accessors when dealing with unaligned pointers, regardless of this patch. Signed-off-by: Dave Martin Acked-by: Nicolas Pitre Signed-off-by: Russell King diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S index 90275f0..49ca86e 100644 --- a/arch/arm/boot/compressed/head.S +++ b/arch/arm/boot/compressed/head.S @@ -652,6 +652,15 @@ __setup_mmu: sub r3, r4, #16384 @ Page directory size mov pc, lr ENDPROC(__setup_mmu) +@ Enable unaligned access on v6, to allow better code generation +@ for the decompressor C code: +__armv6_mmu_cache_on: + mrc p15, 0, r0, c1, c0, 0 @ read SCTLR + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + mcr p15, 0, r0, c1, c0, 0 @ write SCTLR + b __armv4_mmu_cache_on + __arm926ejs_mmu_cache_on: #ifdef CONFIG_CPU_DCACHE_WRITETHROUGH mov r0, #4 @ put dcache in WT mode @@ -694,6 +703,9 @@ __armv7_mmu_cache_on: bic r0, r0, #1 << 28 @ clear SCTLR.TRE orr r0, r0, #0x5000 @ I-cache enable, RR cache replacement orr r0, r0, #0x003c @ write buffer + bic r0, r0, #2 @ A (no unaligned access fault) + orr r0, r0, #1 << 22 @ U (v6 unaligned access model) + @ (needed for ARM1176) #ifdef CONFIG_MMU #ifdef CONFIG_CPU_ENDIAN_BE8 orr r0, r0, #1 << 25 @ big-endian page tables @@ -914,7 +926,7 @@ proc_types: .word 0x0007b000 @ ARMv6 .word 0x000ff000 - W(b) __armv4_mmu_cache_on + W(b) __armv6_mmu_cache_on W(b) __armv4_mmu_cache_off W(b) __armv6_mmu_cache_flush -- cgit v0.10.2 From 25389bb207987b5774182f763b9fb65ff08761c8 Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Fri, 23 Nov 2012 14:03:04 +0100 Subject: jbd: Fix lock ordering bug in journal_unmap_buffer() Commit 09e05d48 introduced a wait for transaction commit into journal_unmap_buffer() in the case we are truncating a buffer undergoing commit in the page stradding i_size on a filesystem with blocksize < pagesize. Sadly we forgot to drop buffer lock before waiting for transaction commit and thus deadlock is possible when kjournald wants to lock the buffer. Fix the problem by dropping the buffer lock before waiting for transaction commit. Since we are still holding page lock (and that is OK), buffer cannot disappear under us. CC: stable@vger.kernel.org # Wherever commit 09e05d48 was taken Signed-off-by: Jan Kara diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c index 78b7f84..7f5120b 100644 --- a/fs/jbd/transaction.c +++ b/fs/jbd/transaction.c @@ -1961,7 +1961,9 @@ retry: spin_unlock(&journal->j_list_lock); jbd_unlock_bh_state(bh); spin_unlock(&journal->j_state_lock); + unlock_buffer(bh); log_wait_commit(journal, tid); + lock_buffer(bh); goto retry; } /* -- cgit v0.10.2 From 3786063a3c0ba26a2400a04476c0c0ccfd3c6beb Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Thu, 15 Nov 2012 14:17:01 +0800 Subject: perf kvm: Rename perf_kvm to perf_kvm_stat Then let it only be used in 'perf kvm stat'. Preparatory patch to stop trying to build parts of this tool that for now are only supported on x86. Signed-off-by: Xiao Guangrong Cc: Borislav Petkov Cc: David Ahern Cc: David Howells Cc: Dong Hao Cc: Ingo Molnar Cc: Josh Boyer Cc: Linus Torvalds Cc: Namhyung Kim Cc: Paul Mackerras Cc: Runzhen Wang Cc: Thomas Gleixner Cc: linux-arch@vger.kernel.org Cc: x86@kernel.org Link: http://lkml.kernel.org/r/50A488DD.6090106@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c index e013bdb..9fa45fa 100644 --- a/tools/perf/builtin-kvm.c +++ b/tools/perf/builtin-kvm.c @@ -58,7 +58,7 @@ struct kvm_event_key { }; -struct perf_kvm; +struct perf_kvm_stat; struct kvm_events_ops { bool (*is_begin_event)(struct perf_evsel *evsel, @@ -66,7 +66,7 @@ struct kvm_events_ops { struct event_key *key); bool (*is_end_event)(struct perf_evsel *evsel, struct perf_sample *sample, struct event_key *key); - void (*decode_key)(struct perf_kvm *kvm, struct event_key *key, + void (*decode_key)(struct perf_kvm_stat *kvm, struct event_key *key, char decode[20]); const char *name; }; @@ -79,7 +79,7 @@ struct exit_reasons_table { #define EVENTS_BITS 12 #define EVENTS_CACHE_SIZE (1UL << EVENTS_BITS) -struct perf_kvm { +struct perf_kvm_stat { struct perf_tool tool; struct perf_session *session; @@ -146,7 +146,7 @@ static struct exit_reasons_table svm_exit_reasons[] = { SVM_EXIT_REASONS }; -static const char *get_exit_reason(struct perf_kvm *kvm, u64 exit_code) +static const char *get_exit_reason(struct perf_kvm_stat *kvm, u64 exit_code) { int i = kvm->exit_reasons_size; struct exit_reasons_table *tbl = kvm->exit_reasons; @@ -162,7 +162,7 @@ static const char *get_exit_reason(struct perf_kvm *kvm, u64 exit_code) return "UNKNOWN"; } -static void exit_event_decode_key(struct perf_kvm *kvm, +static void exit_event_decode_key(struct perf_kvm_stat *kvm, struct event_key *key, char decode[20]) { @@ -228,7 +228,7 @@ static bool mmio_event_end(struct perf_evsel *evsel, struct perf_sample *sample, return false; } -static void mmio_event_decode_key(struct perf_kvm *kvm __maybe_unused, +static void mmio_event_decode_key(struct perf_kvm_stat *kvm __maybe_unused, struct event_key *key, char decode[20]) { @@ -271,7 +271,7 @@ static bool ioport_event_end(struct perf_evsel *evsel, return kvm_entry_event(evsel); } -static void ioport_event_decode_key(struct perf_kvm *kvm __maybe_unused, +static void ioport_event_decode_key(struct perf_kvm_stat *kvm __maybe_unused, struct event_key *key, char decode[20]) { @@ -286,7 +286,7 @@ static struct kvm_events_ops ioport_events = { .name = "IO Port Access" }; -static bool register_kvm_events_ops(struct perf_kvm *kvm) +static bool register_kvm_events_ops(struct perf_kvm_stat *kvm) { bool ret = true; @@ -311,7 +311,7 @@ struct vcpu_event_record { }; -static void init_kvm_event_record(struct perf_kvm *kvm) +static void init_kvm_event_record(struct perf_kvm_stat *kvm) { int i; @@ -360,7 +360,7 @@ static struct kvm_event *kvm_alloc_init_event(struct event_key *key) return event; } -static struct kvm_event *find_create_kvm_event(struct perf_kvm *kvm, +static struct kvm_event *find_create_kvm_event(struct perf_kvm_stat *kvm, struct event_key *key) { struct kvm_event *event; @@ -381,7 +381,7 @@ static struct kvm_event *find_create_kvm_event(struct perf_kvm *kvm, return event; } -static bool handle_begin_event(struct perf_kvm *kvm, +static bool handle_begin_event(struct perf_kvm_stat *kvm, struct vcpu_event_record *vcpu_record, struct event_key *key, u64 timestamp) { @@ -425,7 +425,7 @@ static bool update_kvm_event(struct kvm_event *event, int vcpu_id, return true; } -static bool handle_end_event(struct perf_kvm *kvm, +static bool handle_end_event(struct perf_kvm_stat *kvm, struct vcpu_event_record *vcpu_record, struct event_key *key, u64 timestamp) @@ -486,7 +486,7 @@ struct vcpu_event_record *per_vcpu_record(struct thread *thread, return thread->priv; } -static bool handle_kvm_event(struct perf_kvm *kvm, +static bool handle_kvm_event(struct perf_kvm_stat *kvm, struct thread *thread, struct perf_evsel *evsel, struct perf_sample *sample) @@ -541,7 +541,7 @@ static struct kvm_event_key keys[] = { { NULL, NULL } }; -static bool select_key(struct perf_kvm *kvm) +static bool select_key(struct perf_kvm_stat *kvm) { int i; @@ -577,7 +577,8 @@ static void insert_to_result(struct rb_root *result, struct kvm_event *event, rb_insert_color(&event->rb, result); } -static void update_total_count(struct perf_kvm *kvm, struct kvm_event *event) +static void +update_total_count(struct perf_kvm_stat *kvm, struct kvm_event *event) { int vcpu = kvm->trace_vcpu; @@ -590,7 +591,7 @@ static bool event_is_valid(struct kvm_event *event, int vcpu) return !!get_event_count(event, vcpu); } -static void sort_result(struct perf_kvm *kvm) +static void sort_result(struct perf_kvm_stat *kvm) { unsigned int i; int vcpu = kvm->trace_vcpu; @@ -627,7 +628,7 @@ static void print_vcpu_info(int vcpu) pr_info("VCPU %d:\n\n", vcpu); } -static void print_result(struct perf_kvm *kvm) +static void print_result(struct perf_kvm_stat *kvm) { char decode[20]; struct kvm_event *event; @@ -670,7 +671,8 @@ static int process_sample_event(struct perf_tool *tool, struct machine *machine) { struct thread *thread = machine__findnew_thread(machine, sample->tid); - struct perf_kvm *kvm = container_of(tool, struct perf_kvm, tool); + struct perf_kvm_stat *kvm = container_of(tool, struct perf_kvm_stat, + tool); if (thread == NULL) { pr_debug("problem processing %d event, skipping it.\n", @@ -701,7 +703,7 @@ static int get_cpu_isa(struct perf_session *session) return isa; } -static int read_events(struct perf_kvm *kvm) +static int read_events(struct perf_kvm_stat *kvm) { int ret; @@ -750,7 +752,7 @@ static bool verify_vcpu(int vcpu) return true; } -static int kvm_events_report_vcpu(struct perf_kvm *kvm) +static int kvm_events_report_vcpu(struct perf_kvm_stat *kvm) { int ret = -EINVAL; int vcpu = kvm->trace_vcpu; @@ -798,7 +800,8 @@ static const char * const record_args[] = { _p; \ }) -static int kvm_events_record(struct perf_kvm *kvm, int argc, const char **argv) +static int +kvm_events_record(struct perf_kvm_stat *kvm, int argc, const char **argv) { unsigned int rec_argc, i, j; const char **rec_argv; @@ -821,7 +824,8 @@ static int kvm_events_record(struct perf_kvm *kvm, int argc, const char **argv) return cmd_record(i, rec_argv, NULL); } -static int kvm_events_report(struct perf_kvm *kvm, int argc, const char **argv) +static int +kvm_events_report(struct perf_kvm_stat *kvm, int argc, const char **argv) { const struct option kvm_events_report_options[] = { OPT_STRING(0, "event", &kvm->report_event, "report event", @@ -864,24 +868,36 @@ static void print_kvm_stat_usage(void) printf("\nOtherwise, it is the alias of 'perf stat':\n"); } -static int kvm_cmd_stat(struct perf_kvm *kvm, int argc, const char **argv) +static int kvm_cmd_stat(const char *file_name, int argc, const char **argv) { + struct perf_kvm_stat kvm = { + .file_name = file_name, + + .trace_vcpu = -1, + .report_event = "vmexit", + .sort_key = "sample", + + .exit_reasons = svm_exit_reasons, + .exit_reasons_size = ARRAY_SIZE(svm_exit_reasons), + .exit_reasons_isa = "SVM", + }; + if (argc == 1) { print_kvm_stat_usage(); goto perf_stat; } if (!strncmp(argv[1], "rec", 3)) - return kvm_events_record(kvm, argc - 1, argv + 1); + return kvm_events_record(&kvm, argc - 1, argv + 1); if (!strncmp(argv[1], "rep", 3)) - return kvm_events_report(kvm, argc - 1 , argv + 1); + return kvm_events_report(&kvm, argc - 1 , argv + 1); perf_stat: return cmd_stat(argc, argv, NULL); } -static int __cmd_record(struct perf_kvm *kvm, int argc, const char **argv) +static int __cmd_record(const char *file_name, int argc, const char **argv) { int rec_argc, i = 0, j; const char **rec_argv; @@ -890,7 +906,7 @@ static int __cmd_record(struct perf_kvm *kvm, int argc, const char **argv) rec_argv = calloc(rec_argc + 1, sizeof(char *)); rec_argv[i++] = strdup("record"); rec_argv[i++] = strdup("-o"); - rec_argv[i++] = strdup(kvm->file_name); + rec_argv[i++] = strdup(file_name); for (j = 1; j < argc; j++, i++) rec_argv[i] = argv[j]; @@ -899,7 +915,7 @@ static int __cmd_record(struct perf_kvm *kvm, int argc, const char **argv) return cmd_record(i, rec_argv, NULL); } -static int __cmd_report(struct perf_kvm *kvm, int argc, const char **argv) +static int __cmd_report(const char *file_name, int argc, const char **argv) { int rec_argc, i = 0, j; const char **rec_argv; @@ -908,7 +924,7 @@ static int __cmd_report(struct perf_kvm *kvm, int argc, const char **argv) rec_argv = calloc(rec_argc + 1, sizeof(char *)); rec_argv[i++] = strdup("report"); rec_argv[i++] = strdup("-i"); - rec_argv[i++] = strdup(kvm->file_name); + rec_argv[i++] = strdup(file_name); for (j = 1; j < argc; j++, i++) rec_argv[i] = argv[j]; @@ -917,7 +933,8 @@ static int __cmd_report(struct perf_kvm *kvm, int argc, const char **argv) return cmd_report(i, rec_argv, NULL); } -static int __cmd_buildid_list(struct perf_kvm *kvm, int argc, const char **argv) +static int +__cmd_buildid_list(const char *file_name, int argc, const char **argv) { int rec_argc, i = 0, j; const char **rec_argv; @@ -926,7 +943,7 @@ static int __cmd_buildid_list(struct perf_kvm *kvm, int argc, const char **argv) rec_argv = calloc(rec_argc + 1, sizeof(char *)); rec_argv[i++] = strdup("buildid-list"); rec_argv[i++] = strdup("-i"); - rec_argv[i++] = strdup(kvm->file_name); + rec_argv[i++] = strdup(file_name); for (j = 1; j < argc; j++, i++) rec_argv[i] = argv[j]; @@ -937,20 +954,12 @@ static int __cmd_buildid_list(struct perf_kvm *kvm, int argc, const char **argv) int cmd_kvm(int argc, const char **argv, const char *prefix __maybe_unused) { - struct perf_kvm kvm = { - .trace_vcpu = -1, - .report_event = "vmexit", - .sort_key = "sample", - - .exit_reasons = svm_exit_reasons, - .exit_reasons_size = ARRAY_SIZE(svm_exit_reasons), - .exit_reasons_isa = "SVM", - }; + const char *file_name; const struct option kvm_options[] = { - OPT_STRING('i', "input", &kvm.file_name, "file", + OPT_STRING('i', "input", &file_name, "file", "Input file name"), - OPT_STRING('o', "output", &kvm.file_name, "file", + OPT_STRING('o', "output", &file_name, "file", "Output file name"), OPT_BOOLEAN(0, "guest", &perf_guest, "Collect guest os data"), @@ -985,32 +994,32 @@ int cmd_kvm(int argc, const char **argv, const char *prefix __maybe_unused) if (!perf_host) perf_guest = 1; - if (!kvm.file_name) { + if (!file_name) { if (perf_host && !perf_guest) - kvm.file_name = strdup("perf.data.host"); + file_name = strdup("perf.data.host"); else if (!perf_host && perf_guest) - kvm.file_name = strdup("perf.data.guest"); + file_name = strdup("perf.data.guest"); else - kvm.file_name = strdup("perf.data.kvm"); + file_name = strdup("perf.data.kvm"); - if (!kvm.file_name) { + if (!file_name) { pr_err("Failed to allocate memory for filename\n"); return -ENOMEM; } } if (!strncmp(argv[0], "rec", 3)) - return __cmd_record(&kvm, argc, argv); + return __cmd_record(file_name, argc, argv); else if (!strncmp(argv[0], "rep", 3)) - return __cmd_report(&kvm, argc, argv); + return __cmd_report(file_name, argc, argv); else if (!strncmp(argv[0], "diff", 4)) return cmd_diff(argc, argv, NULL); else if (!strncmp(argv[0], "top", 3)) return cmd_top(argc, argv, NULL); else if (!strncmp(argv[0], "buildid-list", 12)) - return __cmd_buildid_list(&kvm, argc, argv); + return __cmd_buildid_list(file_name, argc, argv); else if (!strncmp(argv[0], "stat", 4)) - return kvm_cmd_stat(&kvm, argc, argv); + return kvm_cmd_stat(file_name, argc, argv); else usage_with_options(kvm_usage, kvm_options); -- cgit v0.10.2 From 7321090f6751c9987c26a8c81c63680d16a614d7 Mon Sep 17 00:00:00 2001 From: Xiao Guangrong Date: Mon, 19 Nov 2012 16:19:21 +0800 Subject: perf kvm: Fix building perf kvm on non x86 arches Now, 'perf kvm stat' is only supported on x86, let its code depend on (__x86_64__ || __i386__) to fix building it on other architectures. Reviewed-by: David Howells Signed-off-by: Xiao Guangrong Cc: Borislav Petkov Cc: David Ahern Cc: David Howells Cc: Dong Hao Cc: Ingo Molnar Cc: Josh Boyer Cc: Linus Torvalds Cc: Namhyung Kim Cc: Paul Mackerras Cc: Runzhen Wang Cc: Thomas Gleixner Cc: linux-arch@vger.kernel.org Cc: x86@kernel.org Link: http://lkml.kernel.org/r/50A9EB89.70901@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c index 9fa45fa..283b439 100644 --- a/tools/perf/builtin-kvm.c +++ b/tools/perf/builtin-kvm.c @@ -22,6 +22,7 @@ #include #include +#if defined(__i386__) || defined(__x86_64__) #include #include #include @@ -896,6 +897,7 @@ static int kvm_cmd_stat(const char *file_name, int argc, const char **argv) perf_stat: return cmd_stat(argc, argv, NULL); } +#endif static int __cmd_record(const char *file_name, int argc, const char **argv) { @@ -1018,8 +1020,10 @@ int cmd_kvm(int argc, const char **argv, const char *prefix __maybe_unused) return cmd_top(argc, argv, NULL); else if (!strncmp(argv[0], "buildid-list", 12)) return __cmd_buildid_list(file_name, argc, argv); +#if defined(__i386__) || defined(__x86_64__) else if (!strncmp(argv[0], "stat", 4)) return kvm_cmd_stat(file_name, argc, argv); +#endif else usage_with_options(kvm_usage, kvm_options); -- cgit v0.10.2 From 4a6dd664eba59488c9e56b51a594396d7706eb08 Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Thu, 22 Nov 2012 01:32:45 +0000 Subject: netfilter: ipset: fix netiface set name overflow attribute is copied to IFNAMSIZ-size stack variable, but IFNAMSIZ is smaller than IPSET_MAXNAMELEN. Fortunately nfnetlink needs CAP_NET_ADMIN. Signed-off-by: Florian Westphal Acked-by: Jozsef Kadlecsik Signed-off-by: Pablo Neira Ayuso diff --git a/net/netfilter/ipset/ip_set_hash_netiface.c b/net/netfilter/ipset/ip_set_hash_netiface.c index b9a6338..45a1014 100644 --- a/net/netfilter/ipset/ip_set_hash_netiface.c +++ b/net/netfilter/ipset/ip_set_hash_netiface.c @@ -793,7 +793,7 @@ static struct ip_set_type hash_netiface_type __read_mostly = { [IPSET_ATTR_IP] = { .type = NLA_NESTED }, [IPSET_ATTR_IP_TO] = { .type = NLA_NESTED }, [IPSET_ATTR_IFACE] = { .type = NLA_NUL_STRING, - .len = IPSET_MAXNAMELEN - 1 }, + .len = IFNAMSIZ - 1 }, [IPSET_ATTR_CADT_FLAGS] = { .type = NLA_U32 }, [IPSET_ATTR_CIDR] = { .type = NLA_U8 }, [IPSET_ATTR_TIMEOUT] = { .type = NLA_U32 }, -- cgit v0.10.2 From 6567d748c4e94e3481e523803ec07ebd825c80d6 Mon Sep 17 00:00:00 2001 From: Chris Wilson Date: Sat, 10 Nov 2012 10:00:06 +0000 Subject: Revert "drm/i915: enable rc6 on ilk again" Even with the cumulative set of ilk w/a, rc6 is demonstrably still failing and causing GPU hangs as found by Peter Wu. So we need to disable it again until it is stable. This reverts commit 456470eb583f063ee84c6818251e638598be0fb8 Author: Daniel Vetter Date: Wed Aug 8 23:35:40 2012 +0200 drm/i915: enable rc6 on ilk again and the follow-on commit cd7988eea561a70a4f98e431c1395f913672d626 Author: Daniel Vetter Date: Sun Aug 26 20:33:18 2012 +0200 drm/i915: disable rc6 on ilk when vt-d is enabled Note: The situation around the gen4/5 gpu hangs that cropped up in 3.7 is rather strange. Most useful bisects have lead to commit 6c085a728cf000ac1865d66f8c9b52935558b328 Author: Chris Wilson Date: Mon Aug 20 11:40:46 2012 +0200 drm/i915: Track unbound pages or even later commits that affect the gem bo recycling, which all is way past the point where we re-enabled rc6. But somehow reverting/disabling those commits doesn't help, but disabling rc6 at least helps for many hangs on ilk. Obviously it doesn't change anything at all on gen4, and there are still strange issues left on gen5 (which we unfortunately can't readily reproduce). Also, the error_state signature of the hangs which can be fixed with this patch look remarkably different to those which seem to be unaffected by the rc6 settings: The rc6 hangs are in the ring, somewhere in the MI_FLUSH/PIPE_CONTROL sequence to make ilk coherent, wheras all the other hangs tend to be at a random point in the middle of the user batch. So it could also be that we have different issues. Until we grow more clue, this at least helps some users. Reported-by: Peter Wu References: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Signed-off-by: Chris Wilson [danvet: Added note with some more details about the gen4/5 3.7 gpu hang regression.] Signed-off-by: Daniel Vetter diff --git a/drivers/gpu/drm/i915/intel_pm.c b/drivers/gpu/drm/i915/intel_pm.c index 72f41aa..442968f 100644 --- a/drivers/gpu/drm/i915/intel_pm.c +++ b/drivers/gpu/drm/i915/intel_pm.c @@ -2373,15 +2373,9 @@ int intel_enable_rc6(const struct drm_device *dev) if (i915_enable_rc6 >= 0) return i915_enable_rc6; - if (INTEL_INFO(dev)->gen == 5) { -#ifdef CONFIG_INTEL_IOMMU - /* Disable rc6 on ilk if VT-d is on. */ - if (intel_iommu_gfx_mapped) - return false; -#endif - DRM_DEBUG_DRIVER("Ironlake: only RC6 available\n"); - return INTEL_RC6_ENABLE; - } + /* Disable RC6 on Ironlake */ + if (INTEL_INFO(dev)->gen == 5) + return 0; if (IS_HASWELL(dev)) { DRM_DEBUG_DRIVER("Haswell: only RC6 available\n"); -- cgit v0.10.2 From 6bdd253f635f7b2ef027d116933a6c9ec148b87f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 24 Nov 2012 00:32:19 +0100 Subject: mac80211: fix remain-on-channel (non-)cancelling Felix Liao reported that when an interface is set DOWN while another interface is executing a ROC, the warning in ieee80211_start_next_roc() (about the first item on the list having started already) triggers. This is because ieee80211_roc_purge() calls it even if it never actually changed the list of ROC items. To fix this, simply remove the function call. If it is needed then it will be done by the ieee80211_sw_roc_work() function when the ROC item that is being removed while active is cleaned up. Cc: stable@vger.kernel.org Reported-by: Felix Liao Signed-off-by: Johannes Berg Signed-off-by: John W. Linville diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 83608ac..2c84185 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -458,8 +458,6 @@ void ieee80211_roc_purge(struct ieee80211_sub_if_data *sdata) list_move_tail(&roc->list, &tmp_list); roc->abort = true; } - - ieee80211_start_next_roc(local); mutex_unlock(&local->mtx); list_for_each_entry_safe(roc, tmp, &tmp_list, list) { -- cgit v0.10.2 From 97d66c47277fc801bc1ee93559a848057181ea55 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 22 Nov 2012 06:17:19 -0300 Subject: [media] s5p-fimc: Prevent race conditions during subdevs registration Make sure when fimc and fimc-lite capture video node is registered it has valid pipeline_ops assigned to it. Otherwise when a video node is opened right after is was registered there, might be an attempt to use ops that are just being assigned, after function v4l2_device_register_subdev() returns. Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c index 3d39d97..3fc896b 100644 --- a/drivers/media/platform/s5p-fimc/fimc-capture.c +++ b/drivers/media/platform/s5p-fimc/fimc-capture.c @@ -1774,9 +1774,13 @@ static int fimc_capture_subdev_registered(struct v4l2_subdev *sd) if (ret) return ret; + fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd); + ret = fimc_register_capture_device(fimc, sd->v4l2_dev); - if (ret) + if (ret) { fimc_unregister_m2m_device(fimc); + fimc->pipeline_ops = NULL; + } return ret; } @@ -1793,6 +1797,7 @@ static void fimc_capture_subdev_unregistered(struct v4l2_subdev *sd) if (video_is_registered(&fimc->vid_cap.vfd)) { video_unregister_device(&fimc->vid_cap.vfd); media_entity_cleanup(&fimc->vid_cap.vfd.entity); + fimc->pipeline_ops = NULL; } kfree(fimc->vid_cap.ctx); fimc->vid_cap.ctx = NULL; diff --git a/drivers/media/platform/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c index 9db246b..23f203e 100644 --- a/drivers/media/platform/s5p-fimc/fimc-lite.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite.c @@ -1263,10 +1263,12 @@ static int fimc_lite_subdev_registered(struct v4l2_subdev *sd) return ret; video_set_drvdata(vfd, fimc); + fimc->pipeline_ops = v4l2_get_subdev_hostdata(sd); ret = video_register_device(vfd, VFL_TYPE_GRABBER, -1); if (ret < 0) { media_entity_cleanup(&vfd->entity); + fimc->pipeline_ops = NULL; return ret; } @@ -1285,6 +1287,7 @@ static void fimc_lite_subdev_unregistered(struct v4l2_subdev *sd) if (video_is_registered(&fimc->vfd)) { video_unregister_device(&fimc->vfd); media_entity_cleanup(&fimc->vfd.entity); + fimc->pipeline_ops = NULL; } } diff --git a/drivers/media/platform/s5p-fimc/fimc-mdevice.c b/drivers/media/platform/s5p-fimc/fimc-mdevice.c index 38ea4d1..0531ab7 100644 --- a/drivers/media/platform/s5p-fimc/fimc-mdevice.c +++ b/drivers/media/platform/s5p-fimc/fimc-mdevice.c @@ -352,6 +352,7 @@ static int fimc_register_callback(struct device *dev, void *p) sd = &fimc->vid_cap.subdev; sd->grp_id = FIMC_GROUP_ID; + v4l2_set_subdev_hostdata(sd, (void *)&fimc_pipeline_ops); ret = v4l2_device_register_subdev(&fmd->v4l2_dev, sd); if (ret) { @@ -360,7 +361,6 @@ static int fimc_register_callback(struct device *dev, void *p) return ret; } - fimc->pipeline_ops = &fimc_pipeline_ops; fmd->fimc[fimc->id] = fimc; return 0; } @@ -375,6 +375,7 @@ static int fimc_lite_register_callback(struct device *dev, void *p) return 0; fimc->subdev.grp_id = FLITE_GROUP_ID; + v4l2_set_subdev_hostdata(&fimc->subdev, (void *)&fimc_pipeline_ops); ret = v4l2_device_register_subdev(&fmd->v4l2_dev, &fimc->subdev); if (ret) { @@ -384,7 +385,6 @@ static int fimc_lite_register_callback(struct device *dev, void *p) return ret; } - fimc->pipeline_ops = &fimc_pipeline_ops; fmd->fimc_lite[fimc->index] = fimc; return 0; } -- cgit v0.10.2 From ba6b372cf0af564bdc6c14bf68e078ae34bef222 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 22 Nov 2012 11:12:16 -0300 Subject: [media] s5p-fimc: Don't use mutex_lock_interruptible() in device release() Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this caused driver resources not to be released. Not releasing the buffer queue also prevented other drivers to free memory, e.g. in MMAP -> USERPTR scenario. This patch is required for stable kernels v3.6+. Reported-by: Kamil Debski Reported-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/fimc-capture.c b/drivers/media/platform/s5p-fimc/fimc-capture.c index 3fc896b..891ee87 100644 --- a/drivers/media/platform/s5p-fimc/fimc-capture.c +++ b/drivers/media/platform/s5p-fimc/fimc-capture.c @@ -556,8 +556,7 @@ static int fimc_capture_close(struct file *file) dbg("pid: %d, state: 0x%lx", task_pid_nr(current), fimc->state); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + mutex_lock(&fimc->lock); if (--fimc->vid_cap.refcnt == 0) { clear_bit(ST_CAPT_BUSY, &fimc->state); diff --git a/drivers/media/platform/s5p-fimc/fimc-m2m.c b/drivers/media/platform/s5p-fimc/fimc-m2m.c index 4500e44..62afed3 100644 --- a/drivers/media/platform/s5p-fimc/fimc-m2m.c +++ b/drivers/media/platform/s5p-fimc/fimc-m2m.c @@ -718,8 +718,7 @@ static int fimc_m2m_release(struct file *file) dbg("pid: %d, state: 0x%lx, refcnt= %d", task_pid_nr(current), fimc->state, fimc->m2m.refcnt); - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + mutex_lock(&fimc->lock); v4l2_m2m_ctx_release(ctx->m2m_ctx); fimc_ctrls_delete(ctx); -- cgit v0.10.2 From ddc43d6dc7df0849fe41b91460fa76145cf87b67 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Thu, 22 Nov 2012 11:13:04 -0300 Subject: [media] fimc-lite: Don't use mutex_lock_interruptible() in device release() Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. This patch is required for stable kernels v3.5+. Reported-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-fimc/fimc-lite.c b/drivers/media/platform/s5p-fimc/fimc-lite.c index 23f203e..1b309a7 100644 --- a/drivers/media/platform/s5p-fimc/fimc-lite.c +++ b/drivers/media/platform/s5p-fimc/fimc-lite.c @@ -491,8 +491,7 @@ static int fimc_lite_close(struct file *file) struct fimc_lite *fimc = video_drvdata(file); int ret; - if (mutex_lock_interruptible(&fimc->lock)) - return -ERESTARTSYS; + mutex_lock(&fimc->lock); if (--fimc->ref_count == 0 && fimc->out_path == FIMC_IO_DMA) { clear_bit(ST_FLITE_IN_USE, &fimc->state); -- cgit v0.10.2 From 9868018045c555c7a724c0cb7eeb0caeba9d43ff Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Wed, 21 Nov 2012 11:46:43 -0300 Subject: [media] exynos-gsc: Don't use mutex_lock_interruptible() in device release() Use uninterruptible mutex_lock in the release() file op to make sure all resources are properly freed when a process is being terminated. Returning -ERESTARTSYS has no effect for a terminating process and this may cause driver resources not to be released. Reported-by: Marek Szyprowski Signed-off-by: Sylwester Nawrocki Signed-off-by: Kyungmin Park Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c index 3c7f005..2650be3 100644 --- a/drivers/media/platform/exynos-gsc/gsc-m2m.c +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c @@ -657,8 +657,7 @@ static int gsc_m2m_release(struct file *file) pr_debug("pid: %d, state: 0x%lx, refcnt= %d", task_pid_nr(current), gsc->state, gsc->m2m.refcnt); - if (mutex_lock_interruptible(&gsc->lock)) - return -ERESTARTSYS; + mutex_lock(&gsc->lock); v4l2_m2m_ctx_release(ctx->m2m_ctx); gsc_ctrls_delete(ctx); -- cgit v0.10.2 From bca36481e6fdc8e64f5837bc1d7f9752f3437c63 Mon Sep 17 00:00:00 2001 From: Shaik Ameer Basha Date: Wed, 7 Nov 2012 03:38:31 -0300 Subject: [media] exynos-gsc: Fix settings for input and output image RGB type Macros used to set input and output RGB type aren't correct. Updating the macros as per register manual. Signed-off-by: Shaik Ameer Basha Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos-gsc/gsc-regs.h b/drivers/media/platform/exynos-gsc/gsc-regs.h index 533e994..4678f9a 100644 --- a/drivers/media/platform/exynos-gsc/gsc-regs.h +++ b/drivers/media/platform/exynos-gsc/gsc-regs.h @@ -40,10 +40,10 @@ #define GSC_IN_ROT_YFLIP (2 << 16) #define GSC_IN_ROT_XFLIP (1 << 16) #define GSC_IN_RGB_TYPE_MASK (3 << 14) -#define GSC_IN_RGB_HD_WIDE (3 << 14) -#define GSC_IN_RGB_HD_NARROW (2 << 14) -#define GSC_IN_RGB_SD_WIDE (1 << 14) -#define GSC_IN_RGB_SD_NARROW (0 << 14) +#define GSC_IN_RGB_HD_NARROW (3 << 14) +#define GSC_IN_RGB_HD_WIDE (2 << 14) +#define GSC_IN_RGB_SD_NARROW (1 << 14) +#define GSC_IN_RGB_SD_WIDE (0 << 14) #define GSC_IN_YUV422_1P_ORDER_MASK (1 << 13) #define GSC_IN_YUV422_1P_ORDER_LSB_Y (0 << 13) #define GSC_IN_YUV422_1P_OEDER_LSB_C (1 << 13) @@ -85,10 +85,10 @@ #define GSC_OUT_GLOBAL_ALPHA_MASK (0xff << 24) #define GSC_OUT_GLOBAL_ALPHA(x) ((x) << 24) #define GSC_OUT_RGB_TYPE_MASK (3 << 10) -#define GSC_OUT_RGB_HD_NARROW (3 << 10) -#define GSC_OUT_RGB_HD_WIDE (2 << 10) -#define GSC_OUT_RGB_SD_NARROW (1 << 10) -#define GSC_OUT_RGB_SD_WIDE (0 << 10) +#define GSC_OUT_RGB_HD_WIDE (3 << 10) +#define GSC_OUT_RGB_HD_NARROW (2 << 10) +#define GSC_OUT_RGB_SD_WIDE (1 << 10) +#define GSC_OUT_RGB_SD_NARROW (0 << 10) #define GSC_OUT_YUV422_1P_ORDER_MASK (1 << 9) #define GSC_OUT_YUV422_1P_ORDER_LSB_Y (0 << 9) #define GSC_OUT_YUV422_1P_OEDER_LSB_C (1 << 9) -- cgit v0.10.2 From 24fc681a8ea6efa6bd7d6f366824a31addad2203 Mon Sep 17 00:00:00 2001 From: Sylwester Nawrocki Date: Sat, 10 Nov 2012 19:57:56 -0300 Subject: [media] exynos-gsc: Add missing video device vfl_dir flag initialization vfl_dir should be set to VFL_DIR_M2M so valid ioctls for this mem-to-mem device can be properly determined in the v4l2 core. Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/exynos-gsc/gsc-m2m.c b/drivers/media/platform/exynos-gsc/gsc-m2m.c index 2650be3..c065d04 100644 --- a/drivers/media/platform/exynos-gsc/gsc-m2m.c +++ b/drivers/media/platform/exynos-gsc/gsc-m2m.c @@ -731,6 +731,7 @@ int gsc_register_m2m_device(struct gsc_dev *gsc) gsc->vdev.ioctl_ops = &gsc_m2m_ioctl_ops; gsc->vdev.release = video_device_release_empty; gsc->vdev.lock = &gsc->lock; + gsc->vdev.vfl_dir = VFL_DIR_M2M; snprintf(gsc->vdev.name, sizeof(gsc->vdev.name), "%s.%d:m2m", GSC_MODULE_NAME, gsc->id); -- cgit v0.10.2 From d9acbe1ace5cacc5e104443d94c7402c7fb9dcf9 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Mon, 5 Nov 2012 05:14:03 -0300 Subject: [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism Modified the function s5p_mfc_get_dec_y_adr_v6 to access the decode Y address register instead of display Y address. Signed-off-by: Sunil Mazhavanchery Signed-off-by: Arun Kumar K Acked-by: Kamil Debski Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 50b5bee..3a8cfd9 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -1762,7 +1762,7 @@ int s5p_mfc_get_dspl_y_adr_v6(struct s5p_mfc_dev *dev) int s5p_mfc_get_dec_y_adr_v6(struct s5p_mfc_dev *dev) { - return mfc_read(dev, S5P_FIMV_D_DISPLAY_LUMA_ADDR_V6); + return mfc_read(dev, S5P_FIMV_D_DECODED_LUMA_ADDR_V6); } int s5p_mfc_get_dspl_status_v6(struct s5p_mfc_dev *dev) -- cgit v0.10.2 From d2a0db1ee01aea154ccc460e45a16857e32c4427 Mon Sep 17 00:00:00 2001 From: Arun Kumar K Date: Wed, 14 Nov 2012 09:26:45 -0300 Subject: [media] s5p-mfc: Handle multi-frame input buffer When one input buffer has multiple frames, it should be fed again to the hardware with the remaining bytes. Removed the check for P frame in this scenario as this condition can come with all frame types. Signed-off-by: Arun Kumar K Signed-off-by: ARUN MANKUZHI Acked-by: Kamil Debski Signed-off-by: Sylwester Nawrocki Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc.c b/drivers/media/platform/s5p-mfc/s5p_mfc.c index 130f4ac..3afe879 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc.c @@ -381,11 +381,8 @@ static void s5p_mfc_handle_frame(struct s5p_mfc_ctx *ctx, ctx->consumed_stream += s5p_mfc_hw_call(dev->mfc_ops, get_consumed_stream, dev); if (ctx->codec_mode != S5P_MFC_CODEC_H264_DEC && - s5p_mfc_hw_call(dev->mfc_ops, - get_dec_frame_type, dev) == - S5P_FIMV_DECODE_FRAME_P_FRAME - && ctx->consumed_stream + STUFF_BYTE < - src_buf->b->v4l2_planes[0].bytesused) { + ctx->consumed_stream + STUFF_BYTE < + src_buf->b->v4l2_planes[0].bytesused) { /* Run MFC again on the same buffer */ mfc_debug(2, "Running again the same buffer\n"); ctx->after_packed_pb = 1; -- cgit v0.10.2 From c9faaa09e2a1335678f09c70a0d0eda095564bab Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Wed, 21 Nov 2012 22:43:59 +0100 Subject: can: peak_usb: fix hwtstamp assignment The skb->tstamp is set to the hardware timestamp when available in the USB urb message. This leads to user visible timestamps which contain the 'uptime' of the USB adapter - and not the usual system generated timestamp. Fix this wrong assignment by applying the available hardware timestamp to the skb_shared_hwtstamps data structure - which is intended for this purpose. Cc: linux-stable Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde diff --git a/drivers/net/can/usb/peak_usb/pcan_usb.c b/drivers/net/can/usb/peak_usb/pcan_usb.c index 86f26a1..25723d8 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb.c @@ -519,8 +519,10 @@ static int pcan_usb_decode_error(struct pcan_usb_msg_context *mc, u8 n, mc->pdev->dev.can.state = new_state; if (status_len & PCAN_USB_STATUSLEN_TIMESTAMP) { + struct skb_shared_hwtstamps *hwts = skb_hwtstamps(skb); + peak_usb_get_ts_tv(&mc->pdev->time_ref, mc->ts16, &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts->hwtstamp = timeval_to_ktime(tv); } netif_rx(skb); @@ -605,6 +607,7 @@ static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len) struct sk_buff *skb; struct can_frame *cf; struct timeval tv; + struct skb_shared_hwtstamps *hwts; skb = alloc_can_skb(mc->netdev, &cf); if (!skb) @@ -652,7 +655,8 @@ static int pcan_usb_decode_data(struct pcan_usb_msg_context *mc, u8 status_len) /* convert timestamp into kernel time */ peak_usb_get_ts_tv(&mc->pdev->time_ref, mc->ts16, &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts = skb_hwtstamps(skb); + hwts->hwtstamp = timeval_to_ktime(tv); /* push the skb */ netif_rx(skb); diff --git a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c index e1626d9..30d79bf 100644 --- a/drivers/net/can/usb/peak_usb/pcan_usb_pro.c +++ b/drivers/net/can/usb/peak_usb/pcan_usb_pro.c @@ -532,6 +532,7 @@ static int pcan_usb_pro_handle_canmsg(struct pcan_usb_pro_interface *usb_if, struct can_frame *can_frame; struct sk_buff *skb; struct timeval tv; + struct skb_shared_hwtstamps *hwts; skb = alloc_can_skb(netdev, &can_frame); if (!skb) @@ -549,7 +550,8 @@ static int pcan_usb_pro_handle_canmsg(struct pcan_usb_pro_interface *usb_if, memcpy(can_frame->data, rx->data, can_frame->can_dlc); peak_usb_get_ts_tv(&usb_if->time_ref, le32_to_cpu(rx->ts32), &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts = skb_hwtstamps(skb); + hwts->hwtstamp = timeval_to_ktime(tv); netif_rx(skb); netdev->stats.rx_packets++; @@ -570,6 +572,7 @@ static int pcan_usb_pro_handle_error(struct pcan_usb_pro_interface *usb_if, u8 err_mask = 0; struct sk_buff *skb; struct timeval tv; + struct skb_shared_hwtstamps *hwts; /* nothing should be sent while in BUS_OFF state */ if (dev->can.state == CAN_STATE_BUS_OFF) @@ -664,7 +667,8 @@ static int pcan_usb_pro_handle_error(struct pcan_usb_pro_interface *usb_if, dev->can.state = new_state; peak_usb_get_ts_tv(&usb_if->time_ref, le32_to_cpu(er->ts32), &tv); - skb->tstamp = timeval_to_ktime(tv); + hwts = skb_hwtstamps(skb); + hwts->hwtstamp = timeval_to_ktime(tv); netif_rx(skb); netdev->stats.rx_packets++; netdev->stats.rx_bytes += can_frame->can_dlc; -- cgit v0.10.2 From 81b401100c01d2357031e874689f89bd788d13cd Mon Sep 17 00:00:00 2001 From: Oliver Hartkopp Date: Mon, 26 Nov 2012 22:24:23 +0100 Subject: can: bcm: initialize ifindex for timeouts without previous frame reception Set in the rx_ifindex to pass the correct interface index in the case of a message timeout detection. Usually the rx_ifindex value is set at receive time. But when no CAN frame has been received the RX_TIMEOUT notification did not contain a valid value. Cc: linux-stable Reported-by: Andre Naujoks Signed-off-by: Oliver Hartkopp Signed-off-by: Marc Kleine-Budde diff --git a/net/can/bcm.c b/net/can/bcm.c index 6f74758..969b7cd 100644 --- a/net/can/bcm.c +++ b/net/can/bcm.c @@ -1084,6 +1084,9 @@ static int bcm_rx_setup(struct bcm_msg_head *msg_head, struct msghdr *msg, op->sk = sk; op->ifindex = ifindex; + /* ifindex for timeout events w/o previous frame reception */ + op->rx_ifindex = ifindex; + /* initialize uninitialized (kzalloc) structure */ hrtimer_init(&op->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL); op->timer.function = bcm_rx_timeout_handler; -- cgit v0.10.2 From e1a676424c290b1c8d757e3860170ac7ecd89af4 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sat, 24 Nov 2012 18:54:37 +0000 Subject: ipv4: avoid passing NULL to inet_putpeer() in icmpv4_xrlim_allow() inet_getpeer_v4() can return NULL under OOM conditions, and while inet_peer_xrlim_allow() is OK with a NULL peer, inet_putpeer() will crash. This code path now uses the same idiom as the others from: 1d861aa4b3fb08822055345f480850205ffe6170 ("inet: Minimize use of cached route inetpeer."). Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/icmp.c b/net/ipv4/icmp.c index f2eccd5..17ff9fd 100644 --- a/net/ipv4/icmp.c +++ b/net/ipv4/icmp.c @@ -257,7 +257,8 @@ static inline bool icmpv4_xrlim_allow(struct net *net, struct rtable *rt, struct inet_peer *peer = inet_getpeer_v4(net->ipv4.peers, fl4->daddr, 1); rc = inet_peer_xrlim_allow(peer, net->ipv4.sysctl_icmp_ratelimit); - inet_putpeer(peer); + if (peer) + inet_putpeer(peer); } out: return rc; -- cgit v0.10.2 From b49d3c1e1c948d76d64790abe9acffa9fa747d19 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sun, 25 Nov 2012 09:44:29 +0000 Subject: net: ipmr: limit MRT_TABLE identifiers Name of pimreg devices are built from following format : char name[IFNAMSIZ]; // IFNAMSIZ == 16 sprintf(name, "pimreg%u", mrt->id); We must therefore limit mrt->id to 9 decimal digits or risk a buffer overflow and a crash. Restrict table identifiers in [0 ... 999999999] interval. Reported-by: Chen Gang Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/ipmr.c b/net/ipv4/ipmr.c index 6168c4d..3eab2b2 100644 --- a/net/ipv4/ipmr.c +++ b/net/ipv4/ipmr.c @@ -1318,6 +1318,10 @@ int ip_mroute_setsockopt(struct sock *sk, int optname, char __user *optval, unsi if (get_user(v, (u32 __user *)optval)) return -EFAULT; + /* "pimreg%u" should not exceed 16 bytes (IFNAMSIZ) */ + if (v != RT_TABLE_DEFAULT && v >= 1000000000) + return -EINVAL; + rtnl_lock(); ret = 0; if (sk == rtnl_dereference(mrt->mroute_sk)) { -- cgit v0.10.2 From 9d34340ebd00eaadbd414e02acc881c5fae903d3 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Mon, 26 Nov 2012 18:06:13 -0500 Subject: c6x: run do_notify_resume with interrupts enabled C6x was mistakenly running do_notify_resume with interrupts disabled. This would triggerlead to a warning in local_bh_enable() because interrupts were disabled: ------------[ cut here ]------------ WARNING: at /es/linux/linux-next/kernel/softirq.c:160 local_bh_enable+0x5c/0x10c() Modules linked in: e02f384d e002cda8 e02f3469 e02f384d 000000a0 e00363fc e01cce58 e5005c00 e0327986 00000000 e63c0aec 00000164 e00363fc 00000000 fffffffe e5005c00 e61fde00 e0268184 00000134 e01c91dc 00000001 fffffffe 00000000 10000100 e01c80e4 e5005c00 00000000 00000000 00000000 e63c0aec e526ce00 10000100 e628f920 e63c0a88 e6010410 e6449750 e5005c20 00000000 00000000 e63c0a80 e5005c20 e01c8590 e63c0a80 e5005c20 e63c0aec e00a0554 e009c758 e639e860 irq_spurious_proc_fops+0x6ad/0x3438 warn_slowpath_common+0x8c/0xb8 irq_spurious_proc_fops+0x2c9/0x3438 irq_spurious_proc_fops+0x6ad/0x3438 local_bh_enable+0x5c/0x10c sk_alloc+0x34/0xa4 local_bh_enable+0x5c/0x10c unix_release_sock+0x5c/0x2a0 sys_connect+0x94/0xd4 sock_release+0x38/0x104 sock_close+0x3c/0x54 __fput+0x154/0x2ec filp_close+0xc0/0xe4 task_work_run+0xdc/0x12c sys_close+0x2c/0x74 resume_userspace+0x0/0x30 ---[ end trace a70cbd610ae1f6b4 ]--- This patch enables interrupts before calling do_notify_resume(). Signed-off-by: Mark Salter diff --git a/arch/c6x/kernel/entry.S b/arch/c6x/kernel/entry.S index 5449c36..0c164c2 100644 --- a/arch/c6x/kernel/entry.S +++ b/arch/c6x/kernel/entry.S @@ -277,6 +277,8 @@ work_rescheduled: [A1] BNOP .S1 work_resched,5 work_notifysig: + ;; enable interrupts for do_notify_resume() + UNMASK_INT B2 B .S2 do_notify_resume LDW .D2T1 *+SP(REGS__END+8),A6 ; syscall flag ADDKPC .S2 resume_userspace,B3,1 -- cgit v0.10.2 From 9c0603f487b6b0cfa0b2bbcab7f06333e78db652 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Mon, 26 Nov 2012 18:14:00 -0500 Subject: c6x: fix misleading comment A comment in entry.S incorrectly stated that interrupt vectors called __do_IRQ() and that int6 vector was used for syscalls. Both statements are incorrect for the current kernel, so this patch cleans up the wording to reflect current reality. Signed-off-by: Mark Salter diff --git a/arch/c6x/kernel/entry.S b/arch/c6x/kernel/entry.S index 0c164c2..0ed6157 100644 --- a/arch/c6x/kernel/entry.S +++ b/arch/c6x/kernel/entry.S @@ -429,8 +429,7 @@ ENTRY(ret_from_kernel_execve) ENDPROC(ret_from_kernel_execve) ;; - ;; These are the interrupt handlers, responsible for calling __do_IRQ() - ;; int6 is used for syscalls (see _system_call entry) + ;; These are the interrupt handlers, responsible for calling c6x_do_IRQ() ;; .macro SAVE_ALL_INT SAVE_ALL IRP,ITSR -- cgit v0.10.2 From cb7cb2864e758a1b040040bc55e404c677c911cb Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Wed, 21 Nov 2012 14:41:21 -0800 Subject: x86, kvm: Remove incorrect redundant assembly constraint In __emulate_1op_rax_rdx, we use "+a" and "+d" which are input/output constraints, and *then* use "a" and "d" as input constraints. This is incorrect, but happens to work on some versions of gcc. However, it breaks gcc with -O0 and icc, and may break on future versions of gcc. Reported-and-tested-by: Melanie Blower Signed-off-by: H. Peter Anvin Link: http://lkml.kernel.org/r/B3584E72CFEBED439A3ECA9BCE67A4EF1B17AF90@FMSMSX107.amr.corp.intel.com Reviewed-by: Paolo Bonzini Acked-by: Marcelo Tosatti diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 39171cb..bba39bf 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -426,8 +426,7 @@ static void invalidate_registers(struct x86_emulate_ctxt *ctxt) _ASM_EXTABLE(1b, 3b) \ : "=m" ((ctxt)->eflags), "=&r" (_tmp), \ "+a" (*rax), "+d" (*rdx), "+qm"(_ex) \ - : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val), \ - "a" (*rax), "d" (*rdx)); \ + : "i" (EFLAGS_MASK), "m" ((ctxt)->src.val)); \ } while (0) /* instruction has only one source operand, destination is implicit (e.g. mul, div, imul, idiv) */ -- cgit v0.10.2 From 874807a83139abc094f939e93623c5623573d543 Mon Sep 17 00:00:00 2001 From: NeilBrown Date: Tue, 27 Nov 2012 12:14:40 +1100 Subject: md/raid1{,0}: fix deadlock in bitmap_unplug. If the raid1 or raid10 unplug function gets called from a make_request function (which is very possible) when there are bios on the current->bio_list list, then it will not be able to successfully call bitmap_unplug() and it could need to submit more bios and wait for them to complete. But they won't complete while current->bio_list is non-empty. So detect that case and handle the unplugging off to another thread just like we already do when called from within the scheduler. RAID1 version of bug was introduced in 3.6, so that part of fix is suitable for 3.6.y. RAID10 part won't apply. Cc: stable@vger.kernel.org Reported-by: Torsten Kaiser Reported-by: Peter Maloney Signed-off-by: NeilBrown diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c index 636bae0..a0f7309 100644 --- a/drivers/md/raid1.c +++ b/drivers/md/raid1.c @@ -963,7 +963,7 @@ static void raid1_unplug(struct blk_plug_cb *cb, bool from_schedule) struct r1conf *conf = mddev->private; struct bio *bio; - if (from_schedule) { + if (from_schedule || current->bio_list) { spin_lock_irq(&conf->device_lock); bio_list_merge(&conf->pending_bio_list, &plug->pending); conf->pending_count += plug->pending_cnt; diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index 0d5d0ff..c9acbd7 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -1069,7 +1069,7 @@ static void raid10_unplug(struct blk_plug_cb *cb, bool from_schedule) struct r10conf *conf = mddev->private; struct bio *bio; - if (from_schedule) { + if (from_schedule || current->bio_list) { spin_lock_irq(&conf->device_lock); bio_list_merge(&conf->pending_bio_list, &plug->pending); conf->pending_count += plug->pending_cnt; -- cgit v0.10.2 From c5782e9f5a535af09d7834693a52afdbcc6e5f3f Mon Sep 17 00:00:00 2001 From: Tushar Behera Date: Mon, 26 Nov 2012 16:29:38 -0800 Subject: include/linux/bug.h: fix sparse warning related to BUILD_BUG_ON_INVALID Commit baf05aa9271b ("bug: introduce BUILD_BUG_ON_INVALID() macro") introduces this macro only when _CHECKER_ is not defined. Define a silent macro in the else condition to fix following sparse warning: mm/filemap.c:395:9: error: undefined identifier 'BUILD_BUG_ON_INVALID' mm/filemap.c:396:9: error: undefined identifier 'BUILD_BUG_ON_INVALID' mm/filemap.c:397:9: error: undefined identifier 'BUILD_BUG_ON_INVALID' include/linux/mm.h:419:9: error: undefined identifier 'BUILD_BUG_ON_INVALID' include/linux/mm.h:419:9: error: not a function Signed-off-by: Tushar Behera Acked-by: Konstantin Khlebnikov Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/include/linux/bug.h b/include/linux/bug.h index aaac4bb..b1cf40d 100644 --- a/include/linux/bug.h +++ b/include/linux/bug.h @@ -15,6 +15,7 @@ struct pt_regs; #define BUILD_BUG_ON_NOT_POWER_OF_2(n) #define BUILD_BUG_ON_ZERO(e) (0) #define BUILD_BUG_ON_NULL(e) ((void*)0) +#define BUILD_BUG_ON_INVALID(e) (0) #define BUILD_BUG_ON(condition) #define BUILD_BUG() (0) #else /* __CHECKER__ */ -- cgit v0.10.2 From 56c176c9cac9a77249fa1736bfd792f379d61942 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 26 Nov 2012 16:29:39 -0800 Subject: UAPI: strip the _UAPI prefix from header guards during header installation Strip the _UAPI prefix from header guards during header installation so that any userspace dependencies aren't affected. glibc, for example, checks for linux/types.h, linux/kernel.h, linux/compiler.h and linux/list.h by their guards - though the last two aren't actually exported. libtool: compile: gcc -std=gnu99 -DHAVE_CONFIG_H -I. -Wall -Werror -Wformat -Wformat-security -D_FORTIFY_SOURCE=2 -fno-delete-null-pointer-checks -fstack-protector -O2 -g -pipe -Wall -Wp,-D_FORTIFY_SOURCE=2 -fexceptions -fstack-protector --param=ssp-buffer-size=4 -m32 -march=i686 -mtune=atom -fasynchronous-unwind-tables -c child.c -fPIC -DPIC -o .libs/child.o In file included from cli.c:20:0: common.h:152:8: error: redefinition of 'struct sysinfo' In file included from /usr/include/linux/kernel.h:4:0, from /usr/include/linux/sysctl.h:25, from /usr/include/sys/sysctl.h:43, from common.h:50, from cli.c:20: /usr/include/linux/sysinfo.h:7:8: note: originally defined here Reported-by: Tomasz Torcz Signed-off-by: David Howells Acked-by: Josh Boyer Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/scripts/headers_install.pl b/scripts/headers_install.pl index 239d22d..6c353ae 100644 --- a/scripts/headers_install.pl +++ b/scripts/headers_install.pl @@ -42,6 +42,9 @@ foreach my $filename (@files) { $line =~ s/(^|\s)(inline)\b/$1__$2__/g; $line =~ s/(^|\s)(asm)\b(\s|[(]|$)/$1__$2__$3/g; $line =~ s/(^|\s|[(])(volatile)\b(\s|[(]|$)/$1__$2__$3/g; + $line =~ s/#ifndef _UAPI/#ifndef /; + $line =~ s/#define _UAPI/#define /; + $line =~ s!#endif /[*] _UAPI!#endif /* !; printf {$out} "%s", $line; } close $out; -- cgit v0.10.2 From 05f564849d49499ced97913a0914b5950577d07d Mon Sep 17 00:00:00 2001 From: Stanislav Kinsbursky Date: Mon, 26 Nov 2012 16:29:42 -0800 Subject: proc: check vma->vm_file before dereferencing Commit 7b540d0646ce ("proc_map_files_readdir(): don't bother with grabbing files") switched proc_map_files_readdir() to use @f_mode directly instead of grabbing @file reference, but same time the test for @vm_file presence was lost leading to nil dereference. The patch brings the test back. The all proc_map_files feature is CONFIG_CHECKPOINT_RESTORE wrapped (which is set to 'n' by default) so the bug doesn't affect regular kernels. The regression is 3.7-rc1 only as far as I can tell. [gorcunov@openvz.org: provided changelog] Signed-off-by: Stanislav Kinsbursky Acked-by: Cyrill Gorcunov Cc: Al Viro Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/proc/base.c b/fs/proc/base.c index 3c231ad..9e28356 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -1877,8 +1877,9 @@ static struct dentry *proc_map_files_lookup(struct inode *dir, if (!vma) goto out_no_vma; - result = proc_map_files_instantiate(dir, dentry, task, - (void *)(unsigned long)vma->vm_file->f_mode); + if (vma->vm_file) + result = proc_map_files_instantiate(dir, dentry, task, + (void *)(unsigned long)vma->vm_file->f_mode); out_no_vma: up_read(&mm->mmap_sem); -- cgit v0.10.2 From 82b212f40059bffd6808c07266a942d444d5558a Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 26 Nov 2012 16:29:45 -0800 Subject: Revert "mm: remove __GFP_NO_KSWAPD" With "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" reverted, Zdenek Kabelac reported the following Hmm, so it's just took longer to hit the problem and observe kswapd0 spinning on my CPU again - it's not as endless like before - but still it easily eats minutes - it helps to turn off Firefox or TB (memory hungry apps) so kswapd0 stops soon - and restart those apps again. (And I still have like >1GB of cached memory) kswapd0 R running task 0 30 2 0x00000000 Call Trace: preempt_schedule+0x42/0x60 _raw_spin_unlock+0x55/0x60 put_super+0x31/0x40 drop_super+0x22/0x30 prune_super+0x149/0x1b0 shrink_slab+0xba/0x510 The sysrq+m indicates the system has no swap so it'll never reclaim anonymous pages as part of reclaim/compaction. That is one part of the problem but not the root cause as file-backed pages could also be reclaimed. The likely underlying problem is that kswapd is woken up or kept awake for each THP allocation request in the page allocator slow path. If compaction fails for the requesting process then compaction will be deferred for a time and direct reclaim is avoided. However, if there are a storm of THP requests that are simply rejected, it will still be the the case that kswapd is awake for a prolonged period of time as pgdat->kswapd_max_order is updated each time. This is noticed by the main kswapd() loop and it will not call kswapd_try_to_sleep(). Instead it will loopp, shrinking a small number of pages and calling shrink_slab() on each iteration. The temptation is to supply a patch that checks if kswapd was woken for THP and if so ignore pgdat->kswapd_max_order but it'll be a hack and not backed up by proper testing. As 3.7 is very close to release and this is not a bug we should release with, a safer path is to revert "mm: remove __GFP_NO_KSWAPD" for now and revisit it with the view to ironing out the balance_pgdat() logic in general. Signed-off-by: Mel Gorman Cc: Zdenek Kabelac Cc: Seth Jennings Cc: Valdis Kletnieks Cc: Jiri Slaby Cc: Rik van Riel Cc: Robert Jennings Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 374c46d..ec794a7 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1077,7 +1077,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); * until the request succeeds or until the allocation size falls below * the system page size. This attempts to make sure it does not adversely * impact system performance, so when allocating more than one page, we - * ask the memory allocator to avoid re-trying. + * ask the memory allocator to avoid re-trying, swapping, writing back + * or performing I/O. * * Note, this function also makes sure that the allocated buffer is aligned to * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value. @@ -1091,7 +1092,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); */ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) { - gfp_t flags = __GFP_NOWARN | __GFP_WAIT | __GFP_NORETRY; + gfp_t flags = __GFP_NOWARN | __GFP_WAIT | + __GFP_NORETRY | __GFP_NO_KSWAPD; size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE); void *kbuf; diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 02c1c97..d0a7967 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -31,6 +31,7 @@ struct vm_area_struct; #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u #define ___GFP_NOTRACK 0x200000u +#define ___GFP_NO_KSWAPD 0x400000u #define ___GFP_OTHER_NODE 0x800000u #define ___GFP_WRITE 0x1000000u @@ -85,6 +86,7 @@ struct vm_area_struct; #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) /* Don't track with kmemcheck */ +#define __GFP_NO_KSWAPD ((__force gfp_t)___GFP_NO_KSWAPD) #define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */ #define __GFP_WRITE ((__force gfp_t)___GFP_WRITE) /* Allocator intends to dirty page */ @@ -114,7 +116,8 @@ struct vm_area_struct; __GFP_MOVABLE) #define GFP_IOFS (__GFP_IO | __GFP_FS) #define GFP_TRANSHUGE (GFP_HIGHUSER_MOVABLE | __GFP_COMP | \ - __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN) + __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \ + __GFP_NO_KSWAPD) #ifdef CONFIG_NUMA #define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY) diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h index 9391706..d6fd8e5 100644 --- a/include/trace/events/gfpflags.h +++ b/include/trace/events/gfpflags.h @@ -36,6 +36,7 @@ {(unsigned long)__GFP_RECLAIMABLE, "GFP_RECLAIMABLE"}, \ {(unsigned long)__GFP_MOVABLE, "GFP_MOVABLE"}, \ {(unsigned long)__GFP_NOTRACK, "GFP_NOTRACK"}, \ + {(unsigned long)__GFP_NO_KSWAPD, "GFP_NO_KSWAPD"}, \ {(unsigned long)__GFP_OTHER_NODE, "GFP_OTHER_NODE"} \ ) : "GFP_NOWAIT" diff --git a/mm/page_alloc.c b/mm/page_alloc.c index bcb72c6..9287157 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2416,8 +2416,9 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, goto nopage; restart: - wake_all_kswapd(order, zonelist, high_zoneidx, - zone_idx(preferred_zone)); + if (!(gfp_mask & __GFP_NO_KSWAPD)) + wake_all_kswapd(order, zonelist, high_zoneidx, + zone_idx(preferred_zone)); /* * OK, we're below the kswapd watermark and have kicked background @@ -2494,7 +2495,7 @@ rebalance: * system then fail the allocation instead of entering direct reclaim. */ if ((deferred_compaction || contended_compaction) && - (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE) + (gfp_mask & __GFP_NO_KSWAPD)) goto nopage; /* Try direct reclaim and then allocating */ -- cgit v0.10.2 From 50694c28f1e1dbea18272980d265742a5027fb63 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Mon, 26 Nov 2012 16:29:48 -0800 Subject: mm: vmscan: check for fatal signals iff the process was throttled Commit 5515061d22f0 ("mm: throttle direct reclaimers if PF_MEMALLOC reserves are low and swap is backed by network storage") introduced a check for fatal signals after a process gets throttled for network storage. The intention was that if a process was throttled and got killed that it should not trigger the OOM killer. As pointed out by Minchan Kim and David Rientjes, this check is in the wrong place and too broad. If a system is in am OOM situation and a process is exiting, it can loop in __alloc_pages_slowpath() and calling direct reclaim in a loop. As the fatal signal is pending it returns 1 as if it is making forward progress and can effectively deadlock. This patch moves the fatal_signal_pending() check after throttling to throttle_direct_reclaim() where it belongs. If the process is killed while throttled, it will return immediately without direct reclaim except now it will have TIF_MEMDIE set and will use the PFMEMALLOC reserves. Minchan pointed out that it may be better to direct reclaim before returning to avoid using the reserves because there may be pages that can easily reclaim that would avoid using the reserves. However, we do no such targetted reclaim and there is no guarantee that suitable pages are available. As it is expected that this throttling happens when swap-over-NFS is used there is a possibility that the process will instead swap which may allocate network buffers from the PFMEMALLOC reserves. Hence, in the swap-over-nfs case where a process can be throtted and be killed it can use the reserves to exit or it can potentially use reserves to swap a few pages and then exit. This patch takes the option of using the reserves if necessary to allow the process exit quickly. If this patch passes review it should be considered a -stable candidate for 3.6. Signed-off-by: Mel Gorman Cc: David Rientjes Cc: Luigi Semenzato Cc: Dan Magenheimer Cc: KOSAKI Motohiro Cc: Sonny Rao Cc: Minchan Kim Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 48550c6..cbf84e1 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2207,9 +2207,12 @@ static bool pfmemalloc_watermark_ok(pg_data_t *pgdat) * Throttle direct reclaimers if backing storage is backed by the network * and the PFMEMALLOC reserve for the preferred node is getting dangerously * depleted. kswapd will continue to make progress and wake the processes - * when the low watermark is reached + * when the low watermark is reached. + * + * Returns true if a fatal signal was delivered during throttling. If this + * happens, the page allocator should not consider triggering the OOM killer. */ -static void throttle_direct_reclaim(gfp_t gfp_mask, struct zonelist *zonelist, +static bool throttle_direct_reclaim(gfp_t gfp_mask, struct zonelist *zonelist, nodemask_t *nodemask) { struct zone *zone; @@ -2224,13 +2227,20 @@ static void throttle_direct_reclaim(gfp_t gfp_mask, struct zonelist *zonelist, * processes to block on log_wait_commit(). */ if (current->flags & PF_KTHREAD) - return; + goto out; + + /* + * If a fatal signal is pending, this process should not throttle. + * It should return quickly so it can exit and free its memory + */ + if (fatal_signal_pending(current)) + goto out; /* Check if the pfmemalloc reserves are ok */ first_zones_zonelist(zonelist, high_zoneidx, NULL, &zone); pgdat = zone->zone_pgdat; if (pfmemalloc_watermark_ok(pgdat)) - return; + goto out; /* Account for the throttling */ count_vm_event(PGSCAN_DIRECT_THROTTLE); @@ -2246,12 +2256,20 @@ static void throttle_direct_reclaim(gfp_t gfp_mask, struct zonelist *zonelist, if (!(gfp_mask & __GFP_FS)) { wait_event_interruptible_timeout(pgdat->pfmemalloc_wait, pfmemalloc_watermark_ok(pgdat), HZ); - return; + + goto check_pending; } /* Throttle until kswapd wakes the process */ wait_event_killable(zone->zone_pgdat->pfmemalloc_wait, pfmemalloc_watermark_ok(pgdat)); + +check_pending: + if (fatal_signal_pending(current)) + return true; + +out: + return false; } unsigned long try_to_free_pages(struct zonelist *zonelist, int order, @@ -2273,13 +2291,12 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order, .gfp_mask = sc.gfp_mask, }; - throttle_direct_reclaim(gfp_mask, zonelist, nodemask); - /* - * Do not enter reclaim if fatal signal is pending. 1 is returned so - * that the page allocator does not consider triggering OOM + * Do not enter reclaim if fatal signal was delivered while throttled. + * 1 is returned so that the page allocator does not OOM kill at this + * point. */ - if (fatal_signal_pending(current)) + if (throttle_direct_reclaim(gfp_mask, zonelist, nodemask)) return 1; trace_mm_vmscan_direct_reclaim_begin(order, -- cgit v0.10.2 From 4eff96dd5283a102e0c1cac95247090be74a38ed Mon Sep 17 00:00:00 2001 From: Jan Kara Date: Mon, 26 Nov 2012 16:29:51 -0800 Subject: writeback: put unused inodes to LRU after writeback completion Commit 169ebd90131b ("writeback: Avoid iput() from flusher thread") removed iget-iput pair from inode writeback. As a side effect, inodes that are dirty during iput_final() call won't be ever added to inode LRU (iput_final() doesn't add dirty inodes to LRU and later when the inode is cleaned there's noone to add the inode there). Thus inodes are effectively unreclaimable until someone looks them up again. The practical effect of this bug is limited by the fact that inodes are pinned by a dentry for long enough that the inode gets cleaned. But still the bug can have nasty consequences leading up to OOM conditions under certain circumstances. Following can easily reproduce the problem: for (( i = 0; i < 1000; i++ )); do mkdir $i for (( j = 0; j < 1000; j++ )); do touch $i/$j echo 2 > /proc/sys/vm/drop_caches done done then one needs to run 'sync; ls -lR' to make inodes reclaimable again. We fix the issue by inserting unused clean inodes into the LRU after writeback finishes in inode_sync_complete(). Signed-off-by: Jan Kara Reported-by: OGAWA Hirofumi Cc: Al Viro Cc: OGAWA Hirofumi Cc: Wu Fengguang Cc: Dave Chinner Cc: [3.5+] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/fs/fs-writeback.c b/fs/fs-writeback.c index 51ea267..3e3422f 100644 --- a/fs/fs-writeback.c +++ b/fs/fs-writeback.c @@ -228,6 +228,8 @@ static void requeue_io(struct inode *inode, struct bdi_writeback *wb) static void inode_sync_complete(struct inode *inode) { inode->i_state &= ~I_SYNC; + /* If inode is clean an unused, put it into LRU now... */ + inode_add_lru(inode); /* Waiters must see I_SYNC cleared before being woken up */ smp_mb(); wake_up_bit(&inode->i_state, __I_SYNC); diff --git a/fs/inode.c b/fs/inode.c index b03c719..64999f1 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -408,6 +408,19 @@ static void inode_lru_list_add(struct inode *inode) spin_unlock(&inode->i_sb->s_inode_lru_lock); } +/* + * Add inode to LRU if needed (inode is unused and clean). + * + * Needs inode->i_lock held. + */ +void inode_add_lru(struct inode *inode) +{ + if (!(inode->i_state & (I_DIRTY | I_SYNC | I_FREEING | I_WILL_FREE)) && + !atomic_read(&inode->i_count) && inode->i_sb->s_flags & MS_ACTIVE) + inode_lru_list_add(inode); +} + + static void inode_lru_list_del(struct inode *inode) { spin_lock(&inode->i_sb->s_inode_lru_lock); @@ -1390,8 +1403,7 @@ static void iput_final(struct inode *inode) if (!drop && (sb->s_flags & MS_ACTIVE)) { inode->i_state |= I_REFERENCED; - if (!(inode->i_state & (I_DIRTY|I_SYNC))) - inode_lru_list_add(inode); + inode_add_lru(inode); spin_unlock(&inode->i_lock); return; } diff --git a/fs/internal.h b/fs/internal.h index 916b7cb..2f6af7f 100644 --- a/fs/internal.h +++ b/fs/internal.h @@ -110,6 +110,7 @@ extern int open_check_o_direct(struct file *f); * inode.c */ extern spinlock_t inode_sb_list_lock; +extern void inode_add_lru(struct inode *inode); /* * fs-writeback.c -- cgit v0.10.2 From 8ffeb9b0e6369135bf03a073514f571ef10606b9 Mon Sep 17 00:00:00 2001 From: Chuansheng Liu Date: Mon, 26 Nov 2012 16:29:54 -0800 Subject: watchdog: using u64 in get_sample_period() In get_sample_period(), unsigned long is not enough: watchdog_thresh * 2 * (NSEC_PER_SEC / 5) case1: watchdog_thresh is 10 by default, the sample value will be: 0xEE6B2800 case2: set watchdog_thresh is 20, the sample value will be: 0x1 DCD6 5000 In case2, we need use u64 to express the sample period. Otherwise, changing the threshold thru proc often can not be successful. Signed-off-by: liu chuansheng Acked-by: Don Zickus Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/watchdog.c b/kernel/watchdog.c index 9d4c8d5..dd4b80a 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -116,7 +116,7 @@ static unsigned long get_timestamp(int this_cpu) return cpu_clock(this_cpu) >> 30LL; /* 2^30 ~= 10^9 */ } -static unsigned long get_sample_period(void) +static u64 get_sample_period(void) { /* * convert watchdog_thresh from seconds to ns @@ -125,7 +125,7 @@ static unsigned long get_sample_period(void) * and hard thresholds) to increment before the * hardlockup detector generates a warning */ - return get_softlockup_thresh() * (NSEC_PER_SEC / 5); + return get_softlockup_thresh() * ((u64)NSEC_PER_SEC / 5); } /* Commands for resetting the watchdog */ -- cgit v0.10.2 From aa10990e028cac3d5e255711fb9fb47e00700e35 Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Mon, 26 Nov 2012 16:29:56 -0800 Subject: futex: avoid wake_futex() for a PI futex_q Dave Jones reported a bug with futex_lock_pi() that his trinity test exposed. Sometime between queue_me() and taking the q.lock_ptr, the lock_ptr became NULL, resulting in a crash. While futex_wake() is careful to not call wake_futex() on futex_q's with a pi_state or an rt_waiter (which are either waiting for a futex_unlock_pi() or a PI futex_requeue()), futex_wake_op() and futex_requeue() do not perform the same test. Update futex_wake_op() and futex_requeue() to test for q.pi_state and q.rt_waiter and abort with -EINVAL if detected. To ensure any future breakage is caught, add a WARN() to wake_futex() if the same condition is true. This fix has seen 3 hours of testing with "trinity -c futex" on an x86_64 VM with 4 CPUS. [akpm@linux-foundation.org: tidy up the WARN()] Signed-off-by: Darren Hart Reported-by: Dave Jones Cc: Thomas Gleixner Cc: Peter Zijlstra Cc: Ingo Molnar Cc: John Kacur Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/kernel/futex.c b/kernel/futex.c index 20ef219..19eb089 100644 --- a/kernel/futex.c +++ b/kernel/futex.c @@ -843,6 +843,9 @@ static void wake_futex(struct futex_q *q) { struct task_struct *p = q->task; + if (WARN(q->pi_state || q->rt_waiter, "refusing to wake PI futex\n")) + return; + /* * We set q->lock_ptr = NULL _before_ we wake up the task. If * a non-futex wake up happens on another CPU then the task @@ -1078,6 +1081,10 @@ retry_private: plist_for_each_entry_safe(this, next, head, list) { if (match_futex (&this->key, &key1)) { + if (this->pi_state || this->rt_waiter) { + ret = -EINVAL; + goto out_unlock; + } wake_futex(this); if (++ret >= nr_wake) break; @@ -1090,6 +1097,10 @@ retry_private: op_ret = 0; plist_for_each_entry_safe(this, next, head, list) { if (match_futex (&this->key, &key2)) { + if (this->pi_state || this->rt_waiter) { + ret = -EINVAL; + goto out_unlock; + } wake_futex(this); if (++op_ret >= nr_wake2) break; @@ -1098,6 +1109,7 @@ retry_private: ret += op_ret; } +out_unlock: double_unlock_hb(hb1, hb2); out_put_keys: put_futex_key(&key2); @@ -1387,9 +1399,13 @@ retry_private: /* * FUTEX_WAIT_REQEUE_PI and FUTEX_CMP_REQUEUE_PI should always * be paired with each other and no other futex ops. + * + * We should never be requeueing a futex_q with a pi_state, + * which is awaiting a futex_unlock_pi(). */ if ((requeue_pi && !this->rt_waiter) || - (!requeue_pi && this->rt_waiter)) { + (!requeue_pi && this->rt_waiter) || + this->pi_state) { ret = -EINVAL; break; } -- cgit v0.10.2 From 6662c34fa9c60a48aaa5879cb229cd9a84de9c22 Mon Sep 17 00:00:00 2001 From: "H. Peter Anvin" Date: Tue, 27 Nov 2012 08:54:36 -0800 Subject: x86-32: Unbreak booting on some 486 clones There appear to have been some 486 clones, including the "enhanced" version of Am486, which have CPUID but not CR4. These 486 clones had only the FPU flag, if any, unlike the Intel 486s with CPUID, which also had VME and therefore needed CR4. Therefore, look at the basic CPUID flags and require at least one bit other than bit 0 before we modify CR4. Thanks to Christian Ludloff of sandpile.org for confirming this as a problem. Signed-off-by: H. Peter Anvin diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index 957a47a..4dac2f6 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -292,8 +292,8 @@ default_entry: * be using the global pages. * * NOTE! If we are on a 486 we may have no cr4 at all! - * Specifically, cr4 exists if and only if CPUID exists, - * which in turn exists if and only if EFLAGS.ID exists. + * Specifically, cr4 exists if and only if CPUID exists + * and has flags other than the FPU flag set. */ movl $X86_EFLAGS_ID,%ecx pushl %ecx @@ -308,6 +308,11 @@ default_entry: testl %ecx,%eax jz 6f # No ID flag = no CPUID = no CR4 + movl $1,%eax + cpuid + andl $~1,%edx # Ignore CPUID.FPU + jz 6f # No flags or only CPUID.FPU = no CR4 + movl pa(mmu_cr4_features),%eax movl %eax,%cr4 -- cgit v0.10.2 From 3a98b8614312026d489e56c1d0e294a68e2aad77 Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Mon, 26 Nov 2012 09:48:41 -0500 Subject: cifs: fix writeback race with file that is growing Commit eddb079deb4 created a regression in the writepages codepath. Previously, whenever it needed to check the size of the file, it did so by consulting the inode->i_size field directly. With that patch, the i_size was fetched once on entry into the writepages code and that value was used henceforth. If the file is changing size though (for instance, if someone is writing to it or has truncated it), then that value is likely to be wrong. This can lead to data corruption. Pages past the EOF at the time that the writepages call was issued may be silently dropped and ignored because cifs_writepages wrongly assumes that the file must have been truncated in the interim. Fix cifs_writepages to properly fetch the size from the inode->i_size field instead to properly account for this possibility. Original bug report is here: https://bugzilla.kernel.org/show_bug.cgi?id=50991 Reported-and-Tested-by: Maxim Britov Reviewed-by: Suresh Jayaraman Signed-off-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/file.c b/fs/cifs/file.c index edb25b4..70b6f4c 100644 --- a/fs/cifs/file.c +++ b/fs/cifs/file.c @@ -1794,7 +1794,6 @@ static int cifs_writepages(struct address_space *mapping, struct TCP_Server_Info *server; struct page *page; int rc = 0; - loff_t isize = i_size_read(mapping->host); /* * If wsize is smaller than the page cache size, default to writing @@ -1899,7 +1898,7 @@ retry: */ set_page_writeback(page); - if (page_offset(page) >= isize) { + if (page_offset(page) >= i_size_read(mapping->host)) { done = true; unlock_page(page); end_page_writeback(page); @@ -1932,7 +1931,8 @@ retry: wdata->offset = page_offset(wdata->pages[0]); wdata->pagesz = PAGE_CACHE_SIZE; wdata->tailsz = - min(isize - page_offset(wdata->pages[nr_pages - 1]), + min(i_size_read(mapping->host) - + page_offset(wdata->pages[nr_pages - 1]), (loff_t)PAGE_CACHE_SIZE); wdata->bytes = ((nr_pages - 1) * PAGE_CACHE_SIZE) + wdata->tailsz; -- cgit v0.10.2 From fc58acdbf153f12783b80cb19c04cc9de121b518 Mon Sep 17 00:00:00 2001 From: Jerome Glisse Date: Tue, 27 Nov 2012 16:12:29 -0500 Subject: radeon: fix pll/ctrc mapping on dce2 and dce3 hardware This fix black screen on resume issue that some people are experiencing. There is a bug in the atombios code regarding pll/crtc mapping. The atombios code reverse the logic for the pll and crtc mapping. agd5f: drop unnecessary crtc id check, cc stable in case we miss 3.7. This fixes the root cause that was worked around by commits: drm/radeon: allocate PPLLs from low to high drm/radeon/dce3: switch back to old pll allocation order for discrete Signed-off-by: Jerome Glisse Reviewed-by: Alex Deucher Cc: stable@vger.kernel.org diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c index 3bce029..24d932f 100644 --- a/drivers/gpu/drm/radeon/atombios_crtc.c +++ b/drivers/gpu/drm/radeon/atombios_crtc.c @@ -1696,42 +1696,22 @@ static int radeon_atom_pick_pll(struct drm_crtc *crtc) return ATOM_PPLL2; DRM_ERROR("unable to allocate a PPLL\n"); return ATOM_PPLL_INVALID; - } else if (ASIC_IS_AVIVO(rdev)) { - /* in DP mode, the DP ref clock can come from either PPLL - * depending on the asic: - * DCE3: PPLL1 or PPLL2 - */ - if (ENCODER_MODE_IS_DP(atombios_get_encoder_mode(radeon_crtc->encoder))) { - /* use the same PPLL for all DP monitors */ - pll = radeon_get_shared_dp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } else { - /* use the same PPLL for all monitors with the same clock */ - pll = radeon_get_shared_nondp_ppll(crtc); - if (pll != ATOM_PPLL_INVALID) - return pll; - } - /* all other cases */ - pll_in_use = radeon_get_pll_use_mask(crtc); - /* the order shouldn't matter here, but we probably - * need this until we have atomic modeset - */ - if (rdev->flags & RADEON_IS_IGP) { - if (!(pll_in_use & (1 << ATOM_PPLL1))) - return ATOM_PPLL1; - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; - } else { - if (!(pll_in_use & (1 << ATOM_PPLL2))) - return ATOM_PPLL2; - if (!(pll_in_use & (1 << ATOM_PPLL1))) - return ATOM_PPLL1; - } - DRM_ERROR("unable to allocate a PPLL\n"); - return ATOM_PPLL_INVALID; } else { /* on pre-R5xx asics, the crtc to pll mapping is hardcoded */ + /* some atombios (observed in some DCE2/DCE3) code have a bug, + * the matching btw pll and crtc is done through + * PCLK_CRTC[1|2]_CNTL (0x480/0x484) but atombios code use the + * pll (1 or 2) to select which register to write. ie if using + * pll1 it will use PCLK_CRTC1_CNTL (0x480) and if using pll2 + * it will use PCLK_CRTC2_CNTL (0x484), it then use crtc id to + * choose which value to write. Which is reverse order from + * register logic. So only case that works is when pllid is + * same as crtcid or when both pll and crtc are enabled and + * both use same clock. + * + * So just return crtc id as if crtc and pll were hard linked + * together even if they aren't + */ return radeon_crtc->crtc_id; } } -- cgit v0.10.2 From 42709efb3a47524c6252e1bdc85e205f7bc356fb Mon Sep 17 00:00:00 2001 From: Prarit Bhargava Date: Tue, 16 Oct 2012 09:02:27 -0400 Subject: i7core_edac: fix panic when accessing sysfs files The i7core_edac addrmatch_dev and chancounts_dev have sysfs files associated with them. The sysfs files, however, are coded so that the parent device is is the mci device. This is incorrect and the mci struct should be obtained through the addrmatch_dev and chancounts_dev device's private data field which is populated in i7core_create_sysfs_devices(). Signed-off-by: Prarit Bhargava Signed-off-by: Mauro Carvalho Chehab diff --git a/drivers/edac/i7core_edac.c b/drivers/edac/i7core_edac.c index 3672101..10c8c00 100644 --- a/drivers/edac/i7core_edac.c +++ b/drivers/edac/i7core_edac.c @@ -816,7 +816,7 @@ static ssize_t i7core_inject_store_##param( \ struct device_attribute *mattr, \ const char *data, size_t count) \ { \ - struct mem_ctl_info *mci = to_mci(dev); \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ struct i7core_pvt *pvt; \ long value; \ int rc; \ @@ -845,7 +845,7 @@ static ssize_t i7core_inject_show_##param( \ struct device_attribute *mattr, \ char *data) \ { \ - struct mem_ctl_info *mci = to_mci(dev); \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ struct i7core_pvt *pvt; \ \ pvt = mci->pvt_info; \ @@ -1052,7 +1052,7 @@ static ssize_t i7core_show_counter_##param( \ struct device_attribute *mattr, \ char *data) \ { \ - struct mem_ctl_info *mci = to_mci(dev); \ + struct mem_ctl_info *mci = dev_get_drvdata(dev); \ struct i7core_pvt *pvt = mci->pvt_info; \ \ edac_dbg(1, "\n"); \ -- cgit v0.10.2 From ea3aacf5f22c1002cac97985354658072232e280 Mon Sep 17 00:00:00 2001 From: Will Deacon Date: Fri, 23 Nov 2012 18:55:30 +0100 Subject: ARM: 7586/1: sp804: set cpumask to cpu_possible_mask for clock event device The SP804 driver statically initialises the cpumask of the clock event device to be cpu_all_mask, which is derived from the compile-time constant NR_CPUS. This breaks SMP_ON_UP systems where the interrupt controller handling the sp804 doesn't have the irq_set_affinity callback on the irq_chip, because the common timer code fails to identify the device as cpu-local and ends up treating it as a broadcast device instead. This patch fixes the problem by using cpu_possible_mask at runtime, which will correctly represent the possible CPUs when SMP_ON_UP is being used. Signed-off-by: Will Deacon Signed-off-by: Russell King diff --git a/arch/arm/common/timer-sp.c b/arch/arm/common/timer-sp.c index df13a3f..9d2d3ba 100644 --- a/arch/arm/common/timer-sp.c +++ b/arch/arm/common/timer-sp.c @@ -162,7 +162,6 @@ static struct clock_event_device sp804_clockevent = { .set_mode = sp804_set_mode, .set_next_event = sp804_set_next_event, .rating = 300, - .cpumask = cpu_all_mask, }; static struct irqaction sp804_timer_irq = { @@ -185,6 +184,7 @@ void __init sp804_clockevents_init(void __iomem *base, unsigned int irq, clkevt_reload = DIV_ROUND_CLOSEST(rate, HZ); evt->name = name; evt->irq = irq; + evt->cpumask = cpu_possible_mask; setup_irq(irq, &sp804_timer_irq); clockevents_config_and_register(evt, rate, 0xf, 0xffffffff); -- cgit v0.10.2 From 4b05a1c74d1cfae37cf6ff293ee928350f031418 Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Tue, 27 Nov 2012 22:59:52 -0500 Subject: percpu-rwsem: use synchronize_sched_expedited Use synchronize_sched_expedited() instead of synchronize_sched() to improve mount speed. This patch improves mount time from 0.500s to 0.013s for Jeff's test-case. Signed-off-by: Mikulas Patocka Reported-and-tested-by: Jeff Chua Signed-off-by: Linus Torvalds diff --git a/include/linux/percpu-rwsem.h b/include/linux/percpu-rwsem.h index 250a4ac..bd1e860 100644 --- a/include/linux/percpu-rwsem.h +++ b/include/linux/percpu-rwsem.h @@ -13,7 +13,7 @@ struct percpu_rw_semaphore { }; #define light_mb() barrier() -#define heavy_mb() synchronize_sched() +#define heavy_mb() synchronize_sched_expedited() static inline void percpu_down_read(struct percpu_rw_semaphore *p) { @@ -51,7 +51,7 @@ static inline void percpu_down_write(struct percpu_rw_semaphore *p) { mutex_lock(&p->mtx); p->locked = true; - synchronize_sched(); /* make sure that all readers exit the rcu_read_lock_sched region */ + synchronize_sched_expedited(); /* make sure that all readers exit the rcu_read_lock_sched region */ while (__percpu_count(p->counters)) msleep(1); heavy_mb(); /* C, between read of p->counter and write to data, paired with B */ -- cgit v0.10.2 From c772aa92b6deb2857d4b39a5cc3bd3679cc5f4a6 Mon Sep 17 00:00:00 2001 From: Pavel Shilovsky Date: Wed, 28 Nov 2012 15:27:54 +0400 Subject: CIFS: Fix wrong buffer pointer usage in smb_set_file_info Commit 6bdf6dbd662176c0da5c3ac8ed10ac94e7776c85 caused a regression in setattr codepath that leads to files with wrong attributes. Signed-off-by: Pavel Shilovsky Reviewed-by: Jeff Layton Signed-off-by: Steve French diff --git a/fs/cifs/smb1ops.c b/fs/cifs/smb1ops.c index 56cc4be..34cea27 100644 --- a/fs/cifs/smb1ops.c +++ b/fs/cifs/smb1ops.c @@ -766,7 +766,6 @@ smb_set_file_info(struct inode *inode, const char *full_path, struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb); struct tcon_link *tlink = NULL; struct cifs_tcon *tcon; - FILE_BASIC_INFO info_buf; /* if the file is already open for write, just use that fileid */ open_file = find_writable_file(cinode, true); @@ -817,7 +816,7 @@ smb_set_file_info(struct inode *inode, const char *full_path, netpid = current->tgid; set_via_filehandle: - rc = CIFSSMBSetFileInfo(xid, tcon, &info_buf, netfid, netpid); + rc = CIFSSMBSetFileInfo(xid, tcon, buf, netfid, netpid); if (!rc) cinode->cifsAttrs = le32_to_cpu(buf->Attributes); -- cgit v0.10.2 From be364c8c0f17a3dd42707b5a090b318028538eb9 Mon Sep 17 00:00:00 2001 From: Tommi Rantala Date: Tue, 27 Nov 2012 04:01:46 +0000 Subject: sctp: fix memory leak in sctp_datamsg_from_user() when copy from user space fails Trinity (the syscall fuzzer) discovered a memory leak in SCTP, reproducible e.g. with the sendto() syscall by passing invalid user space pointer in the second argument: #include #include #include int main(void) { int fd; struct sockaddr_in sa; fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/); if (fd < 0) return 1; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("127.0.0.1"); sa.sin_port = htons(11111); sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa)); return 0; } As far as I can tell, the leak has been around since ~2003. Signed-off-by: Tommi Rantala Acked-by: Vlad Yasevich Signed-off-by: David S. Miller diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c index 7c2df9c..f2aebdb 100644 --- a/net/sctp/chunk.c +++ b/net/sctp/chunk.c @@ -284,7 +284,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, goto errout; err = sctp_user_addto_chunk(chunk, offset, len, msgh->msg_iov); if (err < 0) - goto errout; + goto errout_chunk_free; offset += len; @@ -324,7 +324,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, __skb_pull(chunk->skb, (__u8 *)chunk->chunk_hdr - (__u8 *)chunk->skb->data); if (err < 0) - goto errout; + goto errout_chunk_free; sctp_datamsg_assign(msg, chunk); list_add_tail(&chunk->frag_list, &msg->chunks); @@ -332,6 +332,9 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, return msg; +errout_chunk_free: + sctp_chunk_free(chunk); + errout: list_for_each_safe(pos, temp, &msg->chunks) { list_del_init(pos); -- cgit v0.10.2 From 6e51fe7572590d8d86e93b547fab6693d305fd0d Mon Sep 17 00:00:00 2001 From: Tommi Rantala Date: Thu, 22 Nov 2012 03:23:16 +0000 Subject: sctp: fix -ENOMEM result with invalid user space pointer in sendto() syscall Consider the following program, that sets the second argument to the sendto() syscall incorrectly: #include #include #include int main(void) { int fd; struct sockaddr_in sa; fd = socket(AF_INET, SOCK_STREAM, 132 /*IPPROTO_SCTP*/); if (fd < 0) return 1; memset(&sa, 0, sizeof(sa)); sa.sin_family = AF_INET; sa.sin_addr.s_addr = inet_addr("127.0.0.1"); sa.sin_port = htons(11111); sendto(fd, NULL, 1, 0, (struct sockaddr *)&sa, sizeof(sa)); return 0; } We get -ENOMEM: $ strace -e sendto ./demo sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 ENOMEM (Cannot allocate memory) Propagate the error code from sctp_user_addto_chunk(), so that we will tell user space what actually went wrong: $ strace -e sendto ./demo sendto(3, NULL, 1, 0, {sa_family=AF_INET, sin_port=htons(11111), sin_addr=inet_addr("127.0.0.1")}, 16) = -1 EFAULT (Bad address) Noticed while running Trinity (the syscall fuzzer). Signed-off-by: Tommi Rantala Acked-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller diff --git a/net/sctp/chunk.c b/net/sctp/chunk.c index f2aebdb..69ce21e 100644 --- a/net/sctp/chunk.c +++ b/net/sctp/chunk.c @@ -183,7 +183,7 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, msg = sctp_datamsg_new(GFP_KERNEL); if (!msg) - return NULL; + return ERR_PTR(-ENOMEM); /* Note: Calculate this outside of the loop, so that all fragments * have the same expiration. @@ -280,8 +280,11 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, chunk = sctp_make_datafrag_empty(asoc, sinfo, len, frag, 0); - if (!chunk) + if (!chunk) { + err = -ENOMEM; goto errout; + } + err = sctp_user_addto_chunk(chunk, offset, len, msgh->msg_iov); if (err < 0) goto errout_chunk_free; @@ -315,8 +318,10 @@ struct sctp_datamsg *sctp_datamsg_from_user(struct sctp_association *asoc, chunk = sctp_make_datafrag_empty(asoc, sinfo, over, frag, 0); - if (!chunk) + if (!chunk) { + err = -ENOMEM; goto errout; + } err = sctp_user_addto_chunk(chunk, offset, over,msgh->msg_iov); @@ -342,7 +347,7 @@ errout: sctp_chunk_free(chunk); } sctp_datamsg_put(msg); - return NULL; + return ERR_PTR(err); } /* Check whether this message has expired. */ diff --git a/net/sctp/socket.c b/net/sctp/socket.c index a60d1f8..406d957 100644 --- a/net/sctp/socket.c +++ b/net/sctp/socket.c @@ -1915,8 +1915,8 @@ SCTP_STATIC int sctp_sendmsg(struct kiocb *iocb, struct sock *sk, /* Break the message into multiple chunks of maximum size. */ datamsg = sctp_datamsg_from_user(asoc, sinfo, msg, msg_len); - if (!datamsg) { - err = -ENOMEM; + if (IS_ERR(datamsg)) { + err = PTR_ERR(datamsg); goto out_free; } -- cgit v0.10.2 From 92d64c261e77cb2a6117887617e2a629fea6b67c Mon Sep 17 00:00:00 2001 From: Schoch Christian Date: Wed, 28 Nov 2012 05:18:29 +0000 Subject: sctp: Error in calculation of RTTvar The calculation of RTTVAR involves the subtraction of two unsigned numbers which may causes rollover and results in very high values of RTTVAR when RTT > SRTT. With this patch it is possible to set RTOmin = 1 to get the minimum of RTO at 4 times the clock granularity. Change Notes: v2) *Replaced abs() by abs64() and long by __s64, changed patch description. Signed-off-by: Christian Schoch CC: Vlad Yasevich CC: Sridhar Samudrala CC: Neil Horman CC: linux-sctp@vger.kernel.org Acked-by: Vlad Yasevich Acked-by: Neil Horman Signed-off-by: David S. Miller diff --git a/net/sctp/transport.c b/net/sctp/transport.c index 953c21e..206cf52 100644 --- a/net/sctp/transport.c +++ b/net/sctp/transport.c @@ -331,7 +331,7 @@ void sctp_transport_update_rto(struct sctp_transport *tp, __u32 rtt) * 1/8, rto_alpha would be expressed as 3. */ tp->rttvar = tp->rttvar - (tp->rttvar >> net->sctp.rto_beta) - + ((abs(tp->srtt - rtt)) >> net->sctp.rto_beta); + + (((__u32)abs64((__s64)tp->srtt - (__s64)rtt)) >> net->sctp.rto_beta); tp->srtt = tp->srtt - (tp->srtt >> net->sctp.rto_alpha) + (rtt >> net->sctp.rto_alpha); } else { -- cgit v0.10.2 From 29bb8f4a8d94d017700d09ee643483b0708cbd7b Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 28 Nov 2012 13:43:15 +0200 Subject: net/mlx4_en: Can set maxrate only for TC0 Had a typo in memcpy. Signed-off-by: Amir Vadai Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c index 5d367958..b799ab12 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_dcb_nl.c @@ -237,7 +237,7 @@ static int mlx4_en_dcbnl_ieee_setmaxrate(struct net_device *dev, if (err) return err; - memcpy(priv->maxrate, tmp, sizeof(*priv->maxrate)); + memcpy(priv->maxrate, tmp, sizeof(priv->maxrate)); return 0; } -- cgit v0.10.2 From ba695af067f9cadfec84457ac06b44e3fa849b15 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Bj=C3=B8rn=20Mork?= Date: Sun, 25 Nov 2012 06:03:59 +0000 Subject: net: qmi_wwan: add Huawei E173 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The Huawei E173 is a QMI/wwan device which normally appear as 12d1:1436 in Linux. The descriptors displayed in that mode will be picked up by cdc_ether. But the modem has another mode with a different device ID and a slightly different set of descriptors. This is the mode used by Windows like this: 3Modem: USB\VID_12D1&PID_140C&MI_00\6&3A1D2012&0&0000 Networkcard: USB\VID_12D1&PID_140C&MI_01\6&3A1D2012&0&0001 Appli.Inter: USB\VID_12D1&PID_140C&MI_02\6&3A1D2012&0&0002 PC UI Inter: USB\VID_12D1&PID_140C&MI_03\6&3A1D2012&0&0003 Reported-by: Thomas Schäfer Signed-off-by: Bjørn Mork Signed-off-by: David S. Miller diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c index 3b566fa..1ea91f4 100644 --- a/drivers/net/usb/qmi_wwan.c +++ b/drivers/net/usb/qmi_wwan.c @@ -385,6 +385,7 @@ static const struct usb_device_id products[] = { }, /* 3. Combined interface devices matching on interface number */ + {QMI_FIXED_INTF(0x12d1, 0x140c, 1)}, /* Huawei E173 */ {QMI_FIXED_INTF(0x19d2, 0x0002, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0012, 1)}, {QMI_FIXED_INTF(0x19d2, 0x0017, 3)}, -- cgit v0.10.2 From c3b2c2581988d304127c2aa218430b5fca88ce56 Mon Sep 17 00:00:00 2001 From: Tommi Rantala Date: Mon, 26 Nov 2012 04:16:44 +0000 Subject: irda: irttp: fix memory leak in irttp_open_tsap() error path Cleanup the memory we allocated earlier in irttp_open_tsap() when we hit this error path. The leak goes back to at least 1da177e4 ("Linux-2.6.12-rc2"). Discovered with Trinity (the syscall fuzzer). Signed-off-by: Tommi Rantala Signed-off-by: David S. Miller diff --git a/net/irda/irttp.c b/net/irda/irttp.c index 1002e33..ae43c62 100644 --- a/net/irda/irttp.c +++ b/net/irda/irttp.c @@ -441,6 +441,7 @@ struct tsap_cb *irttp_open_tsap(__u8 stsap_sel, int credit, notify_t *notify) lsap = irlmp_open_lsap(stsap_sel, &ttp_notify, 0); if (lsap == NULL) { IRDA_DEBUG(0, "%s: unable to allocate LSAP!!\n", __func__); + __irttp_close_tsap(self); return NULL; } -- cgit v0.10.2 From bd97120fc3d1a11f3124c7c9ba1d91f51829eb85 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Mon, 26 Nov 2012 05:57:27 +0000 Subject: vhost: fix length for cross region descriptor If a single descriptor crosses a region, the second chunk length should be decremented by size translated so far, instead it includes the full descriptor length. Signed-off-by: Michael S. Tsirkin Acked-by: Jason Wang Signed-off-by: David S. Miller diff --git a/drivers/vhost/vhost.c b/drivers/vhost/vhost.c index 99ac2cb..dedaf81 100644 --- a/drivers/vhost/vhost.c +++ b/drivers/vhost/vhost.c @@ -1076,7 +1076,7 @@ static int translate_desc(struct vhost_dev *dev, u64 addr, u32 len, } _iov = iov + ret; size = reg->memory_size - addr + reg->guest_phys_addr; - _iov->iov_len = min((u64)len, size); + _iov->iov_len = min((u64)len - s, size); _iov->iov_base = (void __user *)(unsigned long) (reg->userspace_addr + addr - reg->guest_phys_addr); s += size; -- cgit v0.10.2 From fcdc90b025e69a38f9ec2742df099c7ddaa331fe Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 27 Nov 2012 07:29:35 +0000 Subject: atm: forever loop loading ambassador firmware There was a forever loop introduced here when we converted this to request_firmware() back in 2008. Signed-off-by: Dan Carpenter Acked-by: Chas Williams Signed-off-by: David S. Miller diff --git a/drivers/atm/ambassador.c b/drivers/atm/ambassador.c index 89b30f3..ff7bb8a 100644 --- a/drivers/atm/ambassador.c +++ b/drivers/atm/ambassador.c @@ -1961,6 +1961,7 @@ static int __devinit ucode_init (loader_block * lb, amb_dev * dev) { res = loader_verify(lb, dev, rec); if (res) break; + rec = ihex_next_binrec(rec); } release_firmware(fw); if (!res) -- cgit v0.10.2 From 3ed7147189d2fbe8ac6da95db2fd9d6d52f53ce9 Mon Sep 17 00:00:00 2001 From: Jiri Pirko Date: Wed, 28 Nov 2012 06:13:10 +0000 Subject: team: fix hw_features setup Do this in the same way bonding does. This fixed setup resolves performance issues when using some cards with certain offloading. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller diff --git a/drivers/net/team/team.c b/drivers/net/team/team.c index d44cca3..ad86660 100644 --- a/drivers/net/team/team.c +++ b/drivers/net/team/team.c @@ -1794,10 +1794,12 @@ static void team_setup(struct net_device *dev) dev->features |= NETIF_F_LLTX; dev->features |= NETIF_F_GRO; - dev->hw_features = NETIF_F_HW_VLAN_TX | + dev->hw_features = TEAM_VLAN_FEATURES | + NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX | NETIF_F_HW_VLAN_FILTER; + dev->hw_features &= ~(NETIF_F_ALL_CSUM & ~NETIF_F_HW_CSUM); dev->features |= dev->hw_features; } -- cgit v0.10.2 From de0eed2813ce42b8e0320a86cbe373266c904044 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 28 Nov 2012 14:16:05 -0500 Subject: c6x: remove internal kernel symbols from exported setup.h Some internal kernel symbols were referenced in the exported setup.h. This splits out the internal bits from the exported uapi bits. Signed-off-by: Mark Salter diff --git a/arch/c6x/include/asm/setup.h b/arch/c6x/include/asm/setup.h new file mode 100644 index 0000000..ecead15 --- /dev/null +++ b/arch/c6x/include/asm/setup.h @@ -0,0 +1,33 @@ +/* + * Port on Texas Instruments TMS320C6x architecture + * + * Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated + * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASM_C6X_SETUP_H +#define _ASM_C6X_SETUP_H + +#include + +#ifndef __ASSEMBLY__ +extern char c6x_command_line[COMMAND_LINE_SIZE]; + +extern int c6x_add_memory(phys_addr_t start, unsigned long size); + +extern unsigned long ram_start; +extern unsigned long ram_end; + +extern int c6x_num_cores; +extern unsigned int c6x_silicon_rev; +extern unsigned int c6x_devstat; +extern unsigned char c6x_fuse_mac[6]; + +extern void machine_init(unsigned long dt_ptr); +extern void time_init(void); + +#endif /* !__ASSEMBLY__ */ +#endif /* _ASM_C6X_SETUP_H */ diff --git a/arch/c6x/include/uapi/asm/setup.h b/arch/c6x/include/uapi/asm/setup.h index a01e318..ad9ac97 100644 --- a/arch/c6x/include/uapi/asm/setup.h +++ b/arch/c6x/include/uapi/asm/setup.h @@ -1,33 +1,6 @@ -/* - * Port on Texas Instruments TMS320C6x architecture - * - * Copyright (C) 2004, 2009, 2010 2011 Texas Instruments Incorporated - * Author: Aurelien Jacquiot (aurelien.jacquiot@jaluna.com) - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef _ASM_C6X_SETUP_H -#define _ASM_C6X_SETUP_H +#ifndef _UAPI_ASM_C6X_SETUP_H +#define _UAPI_ASM_C6X_SETUP_H #define COMMAND_LINE_SIZE 1024 -#ifndef __ASSEMBLY__ -extern char c6x_command_line[COMMAND_LINE_SIZE]; - -extern int c6x_add_memory(phys_addr_t start, unsigned long size); - -extern unsigned long ram_start; -extern unsigned long ram_end; - -extern int c6x_num_cores; -extern unsigned int c6x_silicon_rev; -extern unsigned int c6x_devstat; -extern unsigned char c6x_fuse_mac[6]; - -extern void machine_init(unsigned long dt_ptr); -extern void time_init(void); - -#endif /* !__ASSEMBLY__ */ -#endif /* _ASM_C6X_SETUP_H */ +#endif /* _UAPI_ASM_C6X_SETUP_H */ -- cgit v0.10.2 From 93bbd0c087eb299e0fe11c59d340932180c082b5 Mon Sep 17 00:00:00 2001 From: Mark Salter Date: Wed, 28 Nov 2012 14:22:41 -0500 Subject: c6x: use generic kvm_para.h Signed-off-by: Mark Salter diff --git a/arch/c6x/include/uapi/asm/Kbuild b/arch/c6x/include/uapi/asm/Kbuild index c312b42..e9bc2b2 100644 --- a/arch/c6x/include/uapi/asm/Kbuild +++ b/arch/c6x/include/uapi/asm/Kbuild @@ -1,6 +1,8 @@ # UAPI Header export list include include/uapi/asm-generic/Kbuild.asm +generic-y += kvm_para.h + header-y += byteorder.h header-y += kvm_para.h header-y += ptrace.h diff --git a/arch/c6x/include/uapi/asm/kvm_para.h b/arch/c6x/include/uapi/asm/kvm_para.h deleted file mode 100644 index 14fab8f..0000000 --- a/arch/c6x/include/uapi/asm/kvm_para.h +++ /dev/null @@ -1 +0,0 @@ -#include -- cgit v0.10.2 From 9436d5c32b1ac8d4efdbc933611b5e699908854e Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sat, 10 Nov 2012 01:15:42 -0500 Subject: um: get_safe_registers() should be done in flush_thread(), not start_thread() ... or we'll end up buggering the results of ELF_PLAT_INIT() Signed-off-by: Al Viro diff --git a/arch/um/kernel/exec.c b/arch/um/kernel/exec.c index 3a8ece7..0d7103c 100644 --- a/arch/um/kernel/exec.c +++ b/arch/um/kernel/exec.c @@ -32,13 +32,14 @@ void flush_thread(void) "err = %d\n", ret); force_sig(SIGKILL, current); } + get_safe_registers(current_pt_regs()->regs.gp, + current_pt_regs()->regs.fp); __switch_mm(¤t->mm->context.id); } void start_thread(struct pt_regs *regs, unsigned long eip, unsigned long esp) { - get_safe_registers(regs->regs.gp, regs->regs.fp); PT_REGS_IP(regs) = eip; PT_REGS_SP(regs) = esp; current->ptrace &= ~PT_DTRACE; -- cgit v0.10.2 From d26654e5f9cd27815ab5bc8148c826f3b960396c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 20 Sep 2012 15:49:09 -0400 Subject: openrisk: fix altstack switching on sigreturn do_sigaltstack() expects _userland_ address, TYVM... Signed-off-by: Al Viro diff --git a/arch/openrisc/kernel/signal.c b/arch/openrisc/kernel/signal.c index 3011029..ddedc8a 100644 --- a/arch/openrisc/kernel/signal.c +++ b/arch/openrisc/kernel/signal.c @@ -84,7 +84,6 @@ asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs) { struct rt_sigframe *frame = (struct rt_sigframe __user *)regs->sp; sigset_t set; - stack_t st; /* * Since we stacked the signal on a dword boundary, @@ -104,11 +103,10 @@ asmlinkage long _sys_rt_sigreturn(struct pt_regs *regs) if (restore_sigcontext(regs, &frame->uc.uc_mcontext)) goto badframe; - if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) - goto badframe; /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack(&st, NULL, regs->sp); + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->sp) == -EFAULT) + goto badframe; return regs->gpr[11]; -- cgit v0.10.2 From 9dc87c7b5b0a2db407e086f45cf08ca78208cc16 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 20 Sep 2012 16:38:34 -0400 Subject: sh64: fix altstack switching on sigreturn incidentally, declaring a local variable as __user (!) to make sparse STFU is really sick. Especially since sparse had been 100% right - it *is* a bug. Signed-off-by: Al Viro diff --git a/arch/sh/kernel/signal_64.c b/arch/sh/kernel/signal_64.c index 2385381..d867cd9 100644 --- a/arch/sh/kernel/signal_64.c +++ b/arch/sh/kernel/signal_64.c @@ -347,7 +347,6 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3, { struct rt_sigframe __user *frame = (struct rt_sigframe __user *) (long) REF_REG_SP; sigset_t set; - stack_t __user st; long long ret; /* Always make any pending restarted system calls return -EINTR */ @@ -365,11 +364,10 @@ asmlinkage int sys_rt_sigreturn(unsigned long r2, unsigned long r3, goto badframe; regs->pc -= 4; - if (__copy_from_user(&st, &frame->uc.uc_stack, sizeof(st))) - goto badframe; /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack(&st, NULL, REF_REG_SP); + if (do_sigaltstack(&frame->uc.uc_stack, NULL, REF_REG_SP) == -EFAULT) + goto badframe; return (int) ret; -- cgit v0.10.2 From afd3f96dc34357584763c2dc453192c78a9dbce0 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 20 Nov 2012 10:36:17 -0500 Subject: score: do_sigaltstack() expects a userland pointer... Signed-off-by: Al Viro diff --git a/arch/score/kernel/signal.c b/arch/score/kernel/signal.c index c268bbf..02353bd 100644 --- a/arch/score/kernel/signal.c +++ b/arch/score/kernel/signal.c @@ -148,7 +148,6 @@ score_rt_sigreturn(struct pt_regs *regs) { struct rt_sigframe __user *frame; sigset_t set; - stack_t st; int sig; /* Always make any pending restarted system calls return -EINTR */ @@ -168,12 +167,10 @@ score_rt_sigreturn(struct pt_regs *regs) else if (sig) force_sig(sig, current); - if (__copy_from_user(&st, &frame->rs_uc.uc_stack, sizeof(st))) - goto badframe; - /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - do_sigaltstack((stack_t __user *)&st, NULL, regs->regs[0]); + if (do_sigaltstack(&frame->rs_uc.uc_stack, NULL, regs->regs[0]) == -EFAULT) + goto badframe; regs->is_syscall = 0; __asm__ __volatile__( -- cgit v0.10.2 From 02232f8d2b22708f0651dc515544f4a7ef1e0224 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Tue, 20 Nov 2012 10:41:11 -0500 Subject: microblaze: rt_sigreturn is too trigger-happy about sigaltstack errors Signed-off-by: Al Viro diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 3847e5b..3903e3d 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -111,7 +111,7 @@ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) /* It is more difficult to avoid calling this function than to call it and ignore errors. */ - if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1)) + if (do_sigaltstack(&frame->uc.uc_stack, NULL, regs->r1) == -EFAULT) goto badframe; return rval; -- cgit v0.10.2 From dab55bbafdb491ce2c3f2d7136e54101e948b911 Mon Sep 17 00:00:00 2001 From: Ohad Ben-Cohen Date: Mon, 12 Nov 2012 11:13:51 +0200 Subject: remoteproc: fix error path of ->find_vqs Eliminate an erroneous invocation of rproc_shutdown inside the error path of rproc_virtio_find_vqs. Reported-by: Ido Yariv Signed-off-by: Ohad Ben-Cohen diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c index e7a4780..9e198e5 100644 --- a/drivers/remoteproc/remoteproc_virtio.c +++ b/drivers/remoteproc/remoteproc_virtio.c @@ -120,15 +120,11 @@ static struct virtqueue *rp_find_vq(struct virtio_device *vdev, return vq; } -static void rproc_virtio_del_vqs(struct virtio_device *vdev) +static void __rproc_virtio_del_vqs(struct virtio_device *vdev) { struct virtqueue *vq, *n; - struct rproc *rproc = vdev_to_rproc(vdev); struct rproc_vring *rvring; - /* power down the remote processor before deleting vqs */ - rproc_shutdown(rproc); - list_for_each_entry_safe(vq, n, &vdev->vqs, list) { rvring = vq->priv; rvring->vq = NULL; @@ -137,6 +133,16 @@ static void rproc_virtio_del_vqs(struct virtio_device *vdev) } } +static void rproc_virtio_del_vqs(struct virtio_device *vdev) +{ + struct rproc *rproc = vdev_to_rproc(vdev); + + /* power down the remote processor before deleting vqs */ + rproc_shutdown(rproc); + + __rproc_virtio_del_vqs(vdev); +} + static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs, struct virtqueue *vqs[], vq_callback_t *callbacks[], @@ -163,7 +169,7 @@ static int rproc_virtio_find_vqs(struct virtio_device *vdev, unsigned nvqs, return 0; error: - rproc_virtio_del_vqs(vdev); + __rproc_virtio_del_vqs(vdev); return ret; } -- cgit v0.10.2 From fbb0c41b814d497c656fc7be9e35456f139cb2fb Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Thu, 29 Nov 2012 01:31:31 +0000 Subject: bonding: fix miimon and arp_interval delayed work race conditions First I would give three observations which will be used later. Observation 1: if (delayed_work_pending(wq)) cancel_delayed_work(wq) This usage is wrong because the pending bit is cleared just before the work's fn is executed and if the function re-arms itself we might end up with the work still running. It's safe to call cancel_delayed_work_sync() even if the work is not queued at all. Observation 2: Use of INIT_DELAYED_WORK() Work needs to be initialized only once prior to (de/en)queueing. Observation 3: IFF_UP is set only after ndo_open is called Related race conditions: 1. Race between bonding_store_miimon() and bonding_store_arp_interval() Because of Obs.1 we can end up having both works enqueued. 2. Multiple races with INIT_DELAYED_WORK() Since the works are not protected by anything between INIT_DELAYED_WORK() and calls to (en/de)queue it is possible for races between the following functions: (races are also possible between the calls to INIT_DELAYED_WORK() and workqueue code) bonding_store_miimon() - bonding_store_arp_interval(), bond_close(), bond_open(), enqueued functions bonding_store_arp_interval() - bonding_store_miimon(), bond_close(), bond_open(), enqueued functions 3. By Obs.1 we need to change bond_cancel_all() Bugs 1 and 2 are fixed by moving all work initializations in bond_open which by Obs. 2 and Obs. 3 and the fact that we make sure that all works are cancelled in bond_close(), is guaranteed not to have any work enqueued. Also RTNL lock is now acquired in bonding_store_miimon/arp_interval so they can't race with bond_close and bond_open. The opposing work is cancelled only if the IFF_UP flag is set and it is cancelled unconditionally. The opposing work is already cancelled if the interface is down so no need to cancel it again. This way we don't need new synchronizations for the bonding workqueue. These bugs (and fixes) are tied together and belong in the same patch. Note: I have left 1 line intentionally over 80 characters (84) because I didn't like how it looks broken down. If you'd prefer it otherwise, then simply break it. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 5f5b69f..1445c7d 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -3459,6 +3459,28 @@ static int bond_xmit_hash_policy_l34(struct sk_buff *skb, int count) /*-------------------------- Device entry points ----------------------------*/ +static void bond_work_init_all(struct bonding *bond) +{ + INIT_DELAYED_WORK(&bond->mcast_work, + bond_resend_igmp_join_requests_delayed); + INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); + INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor); + if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) + INIT_DELAYED_WORK(&bond->arp_work, bond_activebackup_arp_mon); + else + INIT_DELAYED_WORK(&bond->arp_work, bond_loadbalance_arp_mon); + INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler); +} + +static void bond_work_cancel_all(struct bonding *bond) +{ + cancel_delayed_work_sync(&bond->mii_work); + cancel_delayed_work_sync(&bond->arp_work); + cancel_delayed_work_sync(&bond->alb_work); + cancel_delayed_work_sync(&bond->ad_work); + cancel_delayed_work_sync(&bond->mcast_work); +} + static int bond_open(struct net_device *bond_dev) { struct bonding *bond = netdev_priv(bond_dev); @@ -3481,41 +3503,27 @@ static int bond_open(struct net_device *bond_dev) } read_unlock(&bond->lock); - INIT_DELAYED_WORK(&bond->mcast_work, bond_resend_igmp_join_requests_delayed); + bond_work_init_all(bond); if (bond_is_lb(bond)) { /* bond_alb_initialize must be called before the timer * is started. */ - if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) { - /* something went wrong - fail the open operation */ + if (bond_alb_initialize(bond, (bond->params.mode == BOND_MODE_ALB))) return -ENOMEM; - } - - INIT_DELAYED_WORK(&bond->alb_work, bond_alb_monitor); queue_delayed_work(bond->wq, &bond->alb_work, 0); } - if (bond->params.miimon) { /* link check interval, in milliseconds. */ - INIT_DELAYED_WORK(&bond->mii_work, bond_mii_monitor); + if (bond->params.miimon) /* link check interval, in milliseconds. */ queue_delayed_work(bond->wq, &bond->mii_work, 0); - } if (bond->params.arp_interval) { /* arp interval, in milliseconds. */ - if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) - INIT_DELAYED_WORK(&bond->arp_work, - bond_activebackup_arp_mon); - else - INIT_DELAYED_WORK(&bond->arp_work, - bond_loadbalance_arp_mon); - queue_delayed_work(bond->wq, &bond->arp_work, 0); if (bond->params.arp_validate) bond->recv_probe = bond_arp_rcv; } if (bond->params.mode == BOND_MODE_8023AD) { - INIT_DELAYED_WORK(&bond->ad_work, bond_3ad_state_machine_handler); queue_delayed_work(bond->wq, &bond->ad_work, 0); /* register to receive LACPDUs */ bond->recv_probe = bond_3ad_lacpdu_recv; @@ -3530,34 +3538,10 @@ static int bond_close(struct net_device *bond_dev) struct bonding *bond = netdev_priv(bond_dev); write_lock_bh(&bond->lock); - bond->send_peer_notif = 0; - write_unlock_bh(&bond->lock); - if (bond->params.miimon) { /* link check interval, in milliseconds. */ - cancel_delayed_work_sync(&bond->mii_work); - } - - if (bond->params.arp_interval) { /* arp interval, in milliseconds. */ - cancel_delayed_work_sync(&bond->arp_work); - } - - switch (bond->params.mode) { - case BOND_MODE_8023AD: - cancel_delayed_work_sync(&bond->ad_work); - break; - case BOND_MODE_TLB: - case BOND_MODE_ALB: - cancel_delayed_work_sync(&bond->alb_work); - break; - default: - break; - } - - if (delayed_work_pending(&bond->mcast_work)) - cancel_delayed_work_sync(&bond->mcast_work); - + bond_work_cancel_all(bond); if (bond_is_lb(bond)) { /* Must be called only after all * slaves have been released @@ -4436,26 +4420,6 @@ static void bond_setup(struct net_device *bond_dev) bond_dev->features |= bond_dev->hw_features; } -static void bond_work_cancel_all(struct bonding *bond) -{ - if (bond->params.miimon && delayed_work_pending(&bond->mii_work)) - cancel_delayed_work_sync(&bond->mii_work); - - if (bond->params.arp_interval && delayed_work_pending(&bond->arp_work)) - cancel_delayed_work_sync(&bond->arp_work); - - if (bond->params.mode == BOND_MODE_ALB && - delayed_work_pending(&bond->alb_work)) - cancel_delayed_work_sync(&bond->alb_work); - - if (bond->params.mode == BOND_MODE_8023AD && - delayed_work_pending(&bond->ad_work)) - cancel_delayed_work_sync(&bond->ad_work); - - if (delayed_work_pending(&bond->mcast_work)) - cancel_delayed_work_sync(&bond->mcast_work); -} - /* * Destroy a bonding device. * Must be under rtnl_lock when this function is called. diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index ef8d2a0..3327a07 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -513,6 +513,8 @@ static ssize_t bonding_store_arp_interval(struct device *d, int new_value, ret = count; struct bonding *bond = to_bond(d); + if (!rtnl_trylock()) + return restart_syscall(); if (sscanf(buf, "%d", &new_value) != 1) { pr_err("%s: no arp_interval value specified.\n", bond->dev->name); @@ -539,10 +541,6 @@ static ssize_t bonding_store_arp_interval(struct device *d, pr_info("%s: ARP monitoring cannot be used with MII monitoring. %s Disabling MII monitoring.\n", bond->dev->name, bond->dev->name); bond->params.miimon = 0; - if (delayed_work_pending(&bond->mii_work)) { - cancel_delayed_work(&bond->mii_work); - flush_workqueue(bond->wq); - } } if (!bond->params.arp_targets[0]) { pr_info("%s: ARP monitoring has been set up, but no ARP targets have been specified.\n", @@ -554,19 +552,12 @@ static ssize_t bonding_store_arp_interval(struct device *d, * timer will get fired off when the open function * is called. */ - if (!delayed_work_pending(&bond->arp_work)) { - if (bond->params.mode == BOND_MODE_ACTIVEBACKUP) - INIT_DELAYED_WORK(&bond->arp_work, - bond_activebackup_arp_mon); - else - INIT_DELAYED_WORK(&bond->arp_work, - bond_loadbalance_arp_mon); - - queue_delayed_work(bond->wq, &bond->arp_work, 0); - } + cancel_delayed_work_sync(&bond->mii_work); + queue_delayed_work(bond->wq, &bond->arp_work, 0); } out: + rtnl_unlock(); return ret; } static DEVICE_ATTR(arp_interval, S_IRUGO | S_IWUSR, @@ -962,6 +953,8 @@ static ssize_t bonding_store_miimon(struct device *d, int new_value, ret = count; struct bonding *bond = to_bond(d); + if (!rtnl_trylock()) + return restart_syscall(); if (sscanf(buf, "%d", &new_value) != 1) { pr_err("%s: no miimon value specified.\n", bond->dev->name); @@ -993,10 +986,6 @@ static ssize_t bonding_store_miimon(struct device *d, bond->params.arp_validate = BOND_ARP_VALIDATE_NONE; } - if (delayed_work_pending(&bond->arp_work)) { - cancel_delayed_work(&bond->arp_work); - flush_workqueue(bond->wq); - } } if (bond->dev->flags & IFF_UP) { @@ -1005,15 +994,12 @@ static ssize_t bonding_store_miimon(struct device *d, * timer will get fired off when the open function * is called. */ - if (!delayed_work_pending(&bond->mii_work)) { - INIT_DELAYED_WORK(&bond->mii_work, - bond_mii_monitor); - queue_delayed_work(bond->wq, - &bond->mii_work, 0); - } + cancel_delayed_work_sync(&bond->arp_work); + queue_delayed_work(bond->wq, &bond->mii_work, 0); } } out: + rtnl_unlock(); return ret; } static DEVICE_ATTR(miimon, S_IRUGO | S_IWUSR, -- cgit v0.10.2 From 90fb6250c509cabd425b7ae4524053dba2e27e2c Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Thu, 29 Nov 2012 01:34:06 +0000 Subject: bonding: make arp_ip_target parameter checks consistent with sysfs The module can be loaded with arp_ip_target="255.255.255.255" which makes it impossible to remove as the function in sysfs checks for that value, so we make the parameter checks consistent with sysfs. v2: Fix formatting v3: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 1445c7d..a7d4735 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -4670,12 +4670,13 @@ static int bond_check_params(struct bond_params *params) arp_ip_count++) { /* not complete check, but should be good enough to catch mistakes */ - if (!isdigit(arp_ip_target[arp_ip_count][0])) { + __be32 ip = in_aton(arp_ip_target[arp_ip_count]); + if (!isdigit(arp_ip_target[arp_ip_count][0]) || + ip == 0 || ip == htonl(INADDR_BROADCAST)) { pr_warning("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n", arp_ip_target[arp_ip_count]); arp_interval = 0; } else { - __be32 ip = in_aton(arp_ip_target[arp_ip_count]); arp_target[arp_ip_count] = ip; } } -- cgit v0.10.2 From e196c0e579902f42cf72414461fb034e5a1ffbf7 Mon Sep 17 00:00:00 2001 From: "nikolay@redhat.com" Date: Thu, 29 Nov 2012 01:37:59 +0000 Subject: bonding: fix race condition in bonding_store_slaves_active Race between bonding_store_slaves_active() and slave manipulation functions. The bond_for_each_slave use in bonding_store_slaves_active() is not protected by any synchronization mechanism. NULL pointer dereference is easy to reach. Fixed by acquiring the bond->lock for the slave walk. v2: Make description text < 75 columns Signed-off-by: Nikolay Aleksandrov Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller diff --git a/drivers/net/bonding/bond_sysfs.c b/drivers/net/bonding/bond_sysfs.c index 3327a07..1877ed7 100644 --- a/drivers/net/bonding/bond_sysfs.c +++ b/drivers/net/bonding/bond_sysfs.c @@ -1568,6 +1568,7 @@ static ssize_t bonding_store_slaves_active(struct device *d, goto out; } + read_lock(&bond->lock); bond_for_each_slave(bond, slave, i) { if (!bond_is_active_slave(slave)) { if (new_value) @@ -1576,6 +1577,7 @@ static ssize_t bonding_store_slaves_active(struct device *d, slave->inactive = 1; } } + read_unlock(&bond->lock); out: return ret; } -- cgit v0.10.2 From 45bce8f3e3436bbe2e03dd2b076abdce79ffabb7 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Nov 2012 10:21:43 -0800 Subject: fs/buffer.c: make block-size be per-page and protected by the page lock This makes the buffer size handling be a per-page thing, which allows us to not have to worry about locking too much when changing the buffer size. If a page doesn't have buffers, we still need to read the block size from the inode, but we can do that with ACCESS_ONCE(), so that even if the size is changing, we get a consistent value. This doesn't convert all functions - many of the buffer functions are used purely by filesystems, which in turn results in the buffer size being fixed at mount-time. So they don't have the same consistency issues that the raw device access can have. Signed-off-by: Linus Torvalds diff --git a/fs/buffer.c b/fs/buffer.c index b5f0442..28a74ff 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1553,6 +1553,28 @@ void unmap_underlying_metadata(struct block_device *bdev, sector_t block) EXPORT_SYMBOL(unmap_underlying_metadata); /* + * Size is a power-of-two in the range 512..PAGE_SIZE, + * and the case we care about most is PAGE_SIZE. + * + * So this *could* possibly be written with those + * constraints in mind (relevant mostly if some + * architecture has a slow bit-scan instruction) + */ +static inline int block_size_bits(unsigned int blocksize) +{ + return ilog2(blocksize); +} + +static struct buffer_head *create_page_buffers(struct page *page, struct inode *inode, unsigned int b_state) +{ + BUG_ON(!PageLocked(page)); + + if (!page_has_buffers(page)) + create_empty_buffers(page, 1 << ACCESS_ONCE(inode->i_blkbits), b_state); + return page_buffers(page); +} + +/* * NOTE! All mapped/uptodate combinations are valid: * * Mapped Uptodate Meaning @@ -1589,19 +1611,13 @@ static int __block_write_full_page(struct inode *inode, struct page *page, sector_t block; sector_t last_block; struct buffer_head *bh, *head; - const unsigned blocksize = 1 << inode->i_blkbits; + unsigned int blocksize, bbits; int nr_underway = 0; int write_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); - BUG_ON(!PageLocked(page)); - - last_block = (i_size_read(inode) - 1) >> inode->i_blkbits; - - if (!page_has_buffers(page)) { - create_empty_buffers(page, blocksize, + head = create_page_buffers(page, inode, (1 << BH_Dirty)|(1 << BH_Uptodate)); - } /* * Be very careful. We have no exclusion from __set_page_dirty_buffers @@ -1613,9 +1629,12 @@ static int __block_write_full_page(struct inode *inode, struct page *page, * handle that here by just cleaning them. */ - block = (sector_t)page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits); - head = page_buffers(page); bh = head; + blocksize = bh->b_size; + bbits = block_size_bits(blocksize); + + block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits); + last_block = (i_size_read(inode) - 1) >> bbits; /* * Get all the dirty buffers mapped to disk addresses and @@ -1806,12 +1825,10 @@ int __block_write_begin(struct page *page, loff_t pos, unsigned len, BUG_ON(to > PAGE_CACHE_SIZE); BUG_ON(from > to); - blocksize = 1 << inode->i_blkbits; - if (!page_has_buffers(page)) - create_empty_buffers(page, blocksize, 0); - head = page_buffers(page); + head = create_page_buffers(page, inode, 0); + blocksize = head->b_size; + bbits = block_size_bits(blocksize); - bbits = inode->i_blkbits; block = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits); for(bh = head, block_start = 0; bh != head || !block_start; @@ -1881,11 +1898,11 @@ static int __block_commit_write(struct inode *inode, struct page *page, unsigned blocksize; struct buffer_head *bh, *head; - blocksize = 1 << inode->i_blkbits; + bh = head = page_buffers(page); + blocksize = bh->b_size; - for(bh = head = page_buffers(page), block_start = 0; - bh != head || !block_start; - block_start=block_end, bh = bh->b_this_page) { + block_start = 0; + do { block_end = block_start + blocksize; if (block_end <= from || block_start >= to) { if (!buffer_uptodate(bh)) @@ -1895,7 +1912,10 @@ static int __block_commit_write(struct inode *inode, struct page *page, mark_buffer_dirty(bh); } clear_buffer_new(bh); - } + + block_start = block_end; + bh = bh->b_this_page; + } while (bh != head); /* * If this is a partial write which happened to make all buffers @@ -2020,7 +2040,6 @@ EXPORT_SYMBOL(generic_write_end); int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, unsigned long from) { - struct inode *inode = page->mapping->host; unsigned block_start, block_end, blocksize; unsigned to; struct buffer_head *bh, *head; @@ -2029,13 +2048,13 @@ int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, if (!page_has_buffers(page)) return 0; - blocksize = 1 << inode->i_blkbits; + head = page_buffers(page); + blocksize = head->b_size; to = min_t(unsigned, PAGE_CACHE_SIZE - from, desc->count); to = from + to; if (from < blocksize && to > PAGE_CACHE_SIZE - blocksize) return 0; - head = page_buffers(page); bh = head; block_start = 0; do { @@ -2068,18 +2087,16 @@ int block_read_full_page(struct page *page, get_block_t *get_block) struct inode *inode = page->mapping->host; sector_t iblock, lblock; struct buffer_head *bh, *head, *arr[MAX_BUF_PER_PAGE]; - unsigned int blocksize; + unsigned int blocksize, bbits; int nr, i; int fully_mapped = 1; - BUG_ON(!PageLocked(page)); - blocksize = 1 << inode->i_blkbits; - if (!page_has_buffers(page)) - create_empty_buffers(page, blocksize, 0); - head = page_buffers(page); + head = create_page_buffers(page, inode, 0); + blocksize = head->b_size; + bbits = block_size_bits(blocksize); - iblock = (sector_t)page->index << (PAGE_CACHE_SHIFT - inode->i_blkbits); - lblock = (i_size_read(inode)+blocksize-1) >> inode->i_blkbits; + iblock = (sector_t)page->index << (PAGE_CACHE_SHIFT - bbits); + lblock = (i_size_read(inode)+blocksize-1) >> bbits; bh = head; nr = 0; i = 0; -- cgit v0.10.2 From 1e8b33328a5407b447ff80953655a47014a6dcb9 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Nov 2012 10:49:50 -0800 Subject: blockdev: remove bd_block_size_semaphore again This reverts the block-device direct access code to the previous unlocked code, now that fs/buffer.c no longer needs external locking. With this, fs/block_dev.c is back to the original version, apart from a whitespace cleanup that I didn't want to revert. Signed-off-by: Linus Torvalds diff --git a/drivers/char/raw.c b/drivers/char/raw.c index 0bb207e..54a3a6d 100644 --- a/drivers/char/raw.c +++ b/drivers/char/raw.c @@ -285,7 +285,7 @@ static long raw_ctl_compat_ioctl(struct file *file, unsigned int cmd, static const struct file_operations raw_fops = { .read = do_sync_read, - .aio_read = blkdev_aio_read, + .aio_read = generic_file_aio_read, .write = do_sync_write, .aio_write = blkdev_aio_write, .fsync = blkdev_fsync, diff --git a/fs/block_dev.c b/fs/block_dev.c index 1a1e5e3..47a949d 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -116,8 +116,6 @@ EXPORT_SYMBOL(invalidate_bdev); int set_blocksize(struct block_device *bdev, int size) { - struct address_space *mapping; - /* Size must be a power of two, and between 512 and PAGE_SIZE */ if (size > PAGE_SIZE || size < 512 || !is_power_of_2(size)) return -EINVAL; @@ -126,19 +124,6 @@ int set_blocksize(struct block_device *bdev, int size) if (size < bdev_logical_block_size(bdev)) return -EINVAL; - /* Prevent starting I/O or mapping the device */ - percpu_down_write(&bdev->bd_block_size_semaphore); - - /* Check that the block device is not memory mapped */ - mapping = bdev->bd_inode->i_mapping; - mutex_lock(&mapping->i_mmap_mutex); - if (mapping_mapped(mapping)) { - mutex_unlock(&mapping->i_mmap_mutex); - percpu_up_write(&bdev->bd_block_size_semaphore); - return -EBUSY; - } - mutex_unlock(&mapping->i_mmap_mutex); - /* Don't change the size if it is same as current */ if (bdev->bd_block_size != size) { sync_blockdev(bdev); @@ -146,9 +131,6 @@ int set_blocksize(struct block_device *bdev, int size) bdev->bd_inode->i_blkbits = blksize_bits(size); kill_bdev(bdev); } - - percpu_up_write(&bdev->bd_block_size_semaphore); - return 0; } @@ -459,12 +441,6 @@ static struct inode *bdev_alloc_inode(struct super_block *sb) struct bdev_inode *ei = kmem_cache_alloc(bdev_cachep, GFP_KERNEL); if (!ei) return NULL; - - if (unlikely(percpu_init_rwsem(&ei->bdev.bd_block_size_semaphore))) { - kmem_cache_free(bdev_cachep, ei); - return NULL; - } - return &ei->vfs_inode; } @@ -473,8 +449,6 @@ static void bdev_i_callback(struct rcu_head *head) struct inode *inode = container_of(head, struct inode, i_rcu); struct bdev_inode *bdi = BDEV_I(inode); - percpu_free_rwsem(&bdi->bdev.bd_block_size_semaphore); - kmem_cache_free(bdev_cachep, bdi); } @@ -1593,22 +1567,6 @@ static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg) return blkdev_ioctl(bdev, mode, cmd, arg); } -ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov, - unsigned long nr_segs, loff_t pos) -{ - ssize_t ret; - struct block_device *bdev = I_BDEV(iocb->ki_filp->f_mapping->host); - - percpu_down_read(&bdev->bd_block_size_semaphore); - - ret = generic_file_aio_read(iocb, iov, nr_segs, pos); - - percpu_up_read(&bdev->bd_block_size_semaphore); - - return ret; -} -EXPORT_SYMBOL_GPL(blkdev_aio_read); - /* * Write data to the block device. Only intended for the block device itself * and the raw driver which basically is a fake block device. @@ -1620,16 +1578,12 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos) { struct file *file = iocb->ki_filp; - struct block_device *bdev = I_BDEV(file->f_mapping->host); struct blk_plug plug; ssize_t ret; BUG_ON(iocb->ki_pos != pos); blk_start_plug(&plug); - - percpu_down_read(&bdev->bd_block_size_semaphore); - ret = __generic_file_aio_write(iocb, iov, nr_segs, &iocb->ki_pos); if (ret > 0 || ret == -EIOCBQUEUED) { ssize_t err; @@ -1638,62 +1592,11 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, if (err < 0 && ret > 0) ret = err; } - - percpu_up_read(&bdev->bd_block_size_semaphore); - blk_finish_plug(&plug); - return ret; } EXPORT_SYMBOL_GPL(blkdev_aio_write); -static int blkdev_mmap(struct file *file, struct vm_area_struct *vma) -{ - int ret; - struct block_device *bdev = I_BDEV(file->f_mapping->host); - - percpu_down_read(&bdev->bd_block_size_semaphore); - - ret = generic_file_mmap(file, vma); - - percpu_up_read(&bdev->bd_block_size_semaphore); - - return ret; -} - -static ssize_t blkdev_splice_read(struct file *file, loff_t *ppos, - struct pipe_inode_info *pipe, size_t len, - unsigned int flags) -{ - ssize_t ret; - struct block_device *bdev = I_BDEV(file->f_mapping->host); - - percpu_down_read(&bdev->bd_block_size_semaphore); - - ret = generic_file_splice_read(file, ppos, pipe, len, flags); - - percpu_up_read(&bdev->bd_block_size_semaphore); - - return ret; -} - -static ssize_t blkdev_splice_write(struct pipe_inode_info *pipe, - struct file *file, loff_t *ppos, size_t len, - unsigned int flags) -{ - ssize_t ret; - struct block_device *bdev = I_BDEV(file->f_mapping->host); - - percpu_down_read(&bdev->bd_block_size_semaphore); - - ret = generic_file_splice_write(pipe, file, ppos, len, flags); - - percpu_up_read(&bdev->bd_block_size_semaphore); - - return ret; -} - - /* * Try to release a page associated with block device when the system * is under memory pressure. @@ -1724,16 +1627,16 @@ const struct file_operations def_blk_fops = { .llseek = block_llseek, .read = do_sync_read, .write = do_sync_write, - .aio_read = blkdev_aio_read, + .aio_read = generic_file_aio_read, .aio_write = blkdev_aio_write, - .mmap = blkdev_mmap, + .mmap = generic_file_mmap, .fsync = blkdev_fsync, .unlocked_ioctl = block_ioctl, #ifdef CONFIG_COMPAT .compat_ioctl = compat_blkdev_ioctl, #endif - .splice_read = blkdev_splice_read, - .splice_write = blkdev_splice_write, + .splice_read = generic_file_splice_read, + .splice_write = generic_file_splice_write, }; int ioctl_by_bdev(struct block_device *bdev, unsigned cmd, unsigned long arg) diff --git a/include/linux/fs.h b/include/linux/fs.h index b33cfc9..44f288e 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -462,8 +462,6 @@ struct block_device { int bd_fsfreeze_count; /* Mutex for freeze */ struct mutex bd_fsfreeze_mutex; - /* A semaphore that prevents I/O while block size is being changed */ - struct percpu_rw_semaphore bd_block_size_semaphore; }; /* @@ -2379,8 +2377,6 @@ extern int generic_segment_checks(const struct iovec *iov, unsigned long *nr_segs, size_t *count, int access_flags); /* fs/block_dev.c */ -extern ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov, - unsigned long nr_segs, loff_t pos); extern ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, unsigned long nr_segs, loff_t pos); extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end, -- cgit v0.10.2 From ab73857e354ab9e317613cba7db714e2c12c6547 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Nov 2012 12:27:00 -0800 Subject: direct-io: don't read inode->i_blkbits multiple times Since directio can work on a raw block device, and the block size of the device can change under it, we need to do the same thing that fs/buffer.c now does: read the block size a single time, using ACCESS_ONCE(). Reading it multiple times can get different results, which will then confuse the code because it actually encodes the i_blksize in relationship to the underlying logical blocksize. Signed-off-by: Linus Torvalds diff --git a/fs/direct-io.c b/fs/direct-io.c index f86c720..cf5b44b 100644 --- a/fs/direct-io.c +++ b/fs/direct-io.c @@ -540,6 +540,7 @@ static int get_more_blocks(struct dio *dio, struct dio_submit *sdio, sector_t fs_endblk; /* Into file, in filesystem-sized blocks */ unsigned long fs_count; /* Number of filesystem-sized blocks */ int create; + unsigned int i_blkbits = sdio->blkbits + sdio->blkfactor; /* * If there was a memory error and we've overwritten all the @@ -554,7 +555,7 @@ static int get_more_blocks(struct dio *dio, struct dio_submit *sdio, fs_count = fs_endblk - fs_startblk + 1; map_bh->b_state = 0; - map_bh->b_size = fs_count << dio->inode->i_blkbits; + map_bh->b_size = fs_count << i_blkbits; /* * For writes inside i_size on a DIO_SKIP_HOLES filesystem we @@ -1053,7 +1054,8 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, int seg; size_t size; unsigned long addr; - unsigned blkbits = inode->i_blkbits; + unsigned i_blkbits = ACCESS_ONCE(inode->i_blkbits); + unsigned blkbits = i_blkbits; unsigned blocksize_mask = (1 << blkbits) - 1; ssize_t retval = -EINVAL; loff_t end = offset; @@ -1149,7 +1151,7 @@ do_blockdev_direct_IO(int rw, struct kiocb *iocb, struct inode *inode, dio->inode = inode; dio->rw = rw; sdio.blkbits = blkbits; - sdio.blkfactor = inode->i_blkbits - blkbits; + sdio.blkfactor = i_blkbits - blkbits; sdio.block_in_file = offset >> blkbits; sdio.get_block = get_block; -- cgit v0.10.2 From bbec0270bdd887f96377065ee38b8848b5afa395 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Thu, 29 Nov 2012 12:31:52 -0800 Subject: blkdev_max_block: make private to fs/buffer.c We really don't want to look at the block size for the raw block device accesses in fs/block-dev.c, because it may be changing from under us. So get rid of the max_block logic entirely, since the caller should already have done it anyway. That leaves the only user of this function in fs/buffer.c, so move the whole function there and make it static. Signed-off-by: Linus Torvalds diff --git a/fs/block_dev.c b/fs/block_dev.c index 47a949d..a1e09b4 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -70,19 +70,6 @@ static void bdev_inode_switch_bdi(struct inode *inode, spin_unlock(&dst->wb.list_lock); } -sector_t blkdev_max_block(struct block_device *bdev) -{ - sector_t retval = ~((sector_t)0); - loff_t sz = i_size_read(bdev->bd_inode); - - if (sz) { - unsigned int size = block_size(bdev); - unsigned int sizebits = blksize_bits(size); - retval = (sz >> sizebits); - } - return retval; -} - /* Kill _all_ buffers and pagecache , dirty or not.. */ void kill_bdev(struct block_device *bdev) { @@ -163,52 +150,12 @@ static int blkdev_get_block(struct inode *inode, sector_t iblock, struct buffer_head *bh, int create) { - if (iblock >= blkdev_max_block(I_BDEV(inode))) { - if (create) - return -EIO; - - /* - * for reads, we're just trying to fill a partial page. - * return a hole, they will have to call get_block again - * before they can fill it, and they will get -EIO at that - * time - */ - return 0; - } bh->b_bdev = I_BDEV(inode); bh->b_blocknr = iblock; set_buffer_mapped(bh); return 0; } -static int -blkdev_get_blocks(struct inode *inode, sector_t iblock, - struct buffer_head *bh, int create) -{ - sector_t end_block = blkdev_max_block(I_BDEV(inode)); - unsigned long max_blocks = bh->b_size >> inode->i_blkbits; - - if ((iblock + max_blocks) > end_block) { - max_blocks = end_block - iblock; - if ((long)max_blocks <= 0) { - if (create) - return -EIO; /* write fully beyond EOF */ - /* - * It is a read which is fully beyond EOF. We return - * a !buffer_mapped buffer - */ - max_blocks = 0; - } - } - - bh->b_bdev = I_BDEV(inode); - bh->b_blocknr = iblock; - bh->b_size = max_blocks << inode->i_blkbits; - if (max_blocks) - set_buffer_mapped(bh); - return 0; -} - static ssize_t blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, loff_t offset, unsigned long nr_segs) @@ -217,7 +164,7 @@ blkdev_direct_IO(int rw, struct kiocb *iocb, const struct iovec *iov, struct inode *inode = file->f_mapping->host; return __blockdev_direct_IO(rw, iocb, inode, I_BDEV(inode), iov, offset, - nr_segs, blkdev_get_blocks, NULL, NULL, 0); + nr_segs, blkdev_get_block, NULL, NULL, 0); } int __sync_blockdev(struct block_device *bdev, int wait) diff --git a/fs/buffer.c b/fs/buffer.c index 28a74ff..3586fb0 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -911,6 +911,18 @@ link_dev_buffers(struct page *page, struct buffer_head *head) attach_page_buffers(page, head); } +static sector_t blkdev_max_block(struct block_device *bdev, unsigned int size) +{ + sector_t retval = ~((sector_t)0); + loff_t sz = i_size_read(bdev->bd_inode); + + if (sz) { + unsigned int sizebits = blksize_bits(size); + retval = (sz >> sizebits); + } + return retval; +} + /* * Initialise the state of a blockdev page's buffers. */ @@ -921,7 +933,7 @@ init_page_buffers(struct page *page, struct block_device *bdev, struct buffer_head *head = page_buffers(page); struct buffer_head *bh = head; int uptodate = PageUptodate(page); - sector_t end_block = blkdev_max_block(I_BDEV(bdev->bd_inode)); + sector_t end_block = blkdev_max_block(I_BDEV(bdev->bd_inode), size); do { if (!buffer_mapped(bh)) { diff --git a/include/linux/fs.h b/include/linux/fs.h index 44f288e..75fe9a1 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2047,7 +2047,6 @@ extern void unregister_blkdev(unsigned int, const char *); extern struct block_device *bdget(dev_t); extern struct block_device *bdgrab(struct block_device *bdev); extern void bd_set_size(struct block_device *, loff_t size); -extern sector_t blkdev_max_block(struct block_device *bdev); extern void bd_forget(struct inode *inode); extern void bdput(struct block_device *); extern void invalidate_bdev(struct block_device *); -- cgit v0.10.2 From 696199f8ccf7fc6d17ef89c296ad3b6c78c52d9c Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 29 Nov 2012 22:00:51 -0500 Subject: don't do blind d_drop() in nfs_prime_dcache() Signed-off-by: Al Viro diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index ce8cb92..99489cf 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -450,7 +450,8 @@ void nfs_prime_dcache(struct dentry *parent, struct nfs_entry *entry) nfs_refresh_inode(dentry->d_inode, entry->fattr); goto out; } else { - d_drop(dentry); + if (d_invalidate(dentry) != 0) + goto out; dput(dentry); } } -- cgit v0.10.2 From c44600c9d1de64314c2bd58103f15acb53e10073 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 29 Nov 2012 22:04:36 -0500 Subject: nfs_lookup_revalidate(): fix a leak We are leaking fattr and fhandle if we decide that dentry is not to be invalidated, after all (e.g. happens to be a mountpoint). Just free both before that... Signed-off-by: Al Viro diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c index 99489cf..b9e66b7 100644 --- a/fs/nfs/dir.c +++ b/fs/nfs/dir.c @@ -1101,6 +1101,8 @@ out_set_verifier: out_zap_parent: nfs_zap_caches(dir); out_bad: + nfs_free_fattr(fattr); + nfs_free_fhandle(fhandle); nfs_mark_for_revalidate(dir); if (inode && S_ISDIR(inode->i_mode)) { /* Purge readdir caches. */ @@ -1113,8 +1115,6 @@ out_zap_parent: shrink_dcache_parent(dentry); } d_drop(dentry); - nfs_free_fattr(fattr); - nfs_free_fhandle(fhandle); dput(parent); dfprintk(LOOKUPCACHE, "NFS: %s(%s/%s) is invalid\n", __func__, dentry->d_parent->d_name.name, -- cgit v0.10.2 From 0903a0c8491c1e987dfc6eb294199a36760398bc Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 29 Nov 2012 22:11:06 -0500 Subject: cifs: get rid of blind d_drop() in readdir Signed-off-by: Al Viro diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c index f9b5d3d..1c576e8 100644 --- a/fs/cifs/readdir.c +++ b/fs/cifs/readdir.c @@ -86,14 +86,17 @@ cifs_readdir_lookup(struct dentry *parent, struct qstr *name, dentry = d_lookup(parent, name); if (dentry) { + int err; inode = dentry->d_inode; /* update inode in place if i_ino didn't change */ if (inode && CIFS_I(inode)->uniqueid == fattr->cf_uniqueid) { cifs_fattr_to_inode(inode, fattr); return dentry; } - d_drop(dentry); + err = d_invalidate(dentry); dput(dentry); + if (err) + return NULL; } dentry = d_alloc(parent, name); -- cgit v0.10.2 From 21d8a15ac333b05f1fecdf9fdc30996be2e11d60 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 29 Nov 2012 22:17:21 -0500 Subject: lookup_one_len: don't accept . and .. Signed-off-by: Al Viro diff --git a/fs/namei.c b/fs/namei.c index 937f9d5..5f4cdf3 100644 --- a/fs/namei.c +++ b/fs/namei.c @@ -2131,6 +2131,11 @@ struct dentry *lookup_one_len(const char *name, struct dentry *base, int len) if (!len) return ERR_PTR(-EACCES); + if (unlikely(name[0] == '.')) { + if (len < 2 || (len == 2 && name[1] == '.')) + return ERR_PTR(-EACCES); + } + while (len--) { c = *(const unsigned char *)name++; if (c == '/' || c == '\0') -- cgit v0.10.2 From a77cfcb429ed98845a4e4df72473b8f37acd890b Mon Sep 17 00:00:00 2001 From: Al Viro Date: Thu, 29 Nov 2012 22:57:33 -0500 Subject: fix off-by-one in argument passed by iterate_fd() to callbacks Noticed by Pavel Roskin; the thing in his patch I disagree with was compensating for that shite in callbacks instead of fixing it once in the iterator itself. Signed-off-by: Al Viro diff --git a/fs/file.c b/fs/file.c index 7cb71b9..eff2316 100644 --- a/fs/file.c +++ b/fs/file.c @@ -994,16 +994,18 @@ int iterate_fd(struct files_struct *files, unsigned n, const void *p) { struct fdtable *fdt; - struct file *file; int res = 0; if (!files) return 0; spin_lock(&files->file_lock); - fdt = files_fdtable(files); - while (!res && n < fdt->max_fds) { - file = rcu_dereference_check_fdtable(files, fdt->fd[n++]); - if (file) - res = f(p, file, n); + for (fdt = files_fdtable(files); n < fdt->max_fds; n++) { + struct file *file; + file = rcu_dereference_check_fdtable(files, fdt->fd[n]); + if (!file) + continue; + res = f(p, file, n); + if (res) + break; } spin_unlock(&files->file_lock); return res; -- cgit v0.10.2 From 58d002097b98664e2a39cc708f30d11549d870b2 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 29 Nov 2012 13:54:20 -0800 Subject: mm: compaction: fix return value of capture_free_page() Commit ef6c5be658f6 ("fix incorrect NR_FREE_PAGES accounting (appears like memory leak)") fixes a NR_FREE_PAGE accounting leak but missed the return value which was also missed by this reviewer until today. That return value is used by compaction when adding pages to a list of isolated free pages and without this follow-up fix, there is a risk of free list corruption. Signed-off-by: Mel Gorman Cc: Dave Hansen Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 9287157..7e208f0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -1422,7 +1422,7 @@ int capture_free_page(struct page *page, int alloc_order, int migratetype) } } - return 1UL << order; + return 1UL << alloc_order; } /* -- cgit v0.10.2 From ae64ffcac35de0db628ba9631edf8ff34c5cd7ac Mon Sep 17 00:00:00 2001 From: Jianguo Wu Date: Thu, 29 Nov 2012 13:54:21 -0800 Subject: mm/vmemmap: fix wrong use of virt_to_page I enable CONFIG_DEBUG_VIRTUAL and CONFIG_SPARSEMEM_VMEMMAP, when doing memory hotremove, there is a kernel BUG at arch/x86/mm/physaddr.c:20. It is caused by free_section_usemap()->virt_to_page(), virt_to_page() is only used for kernel direct mapping address, but sparse-vmemmap uses vmemmap address, so it is going wrong here. ------------[ cut here ]------------ kernel BUG at arch/x86/mm/physaddr.c:20! invalid opcode: 0000 [#1] SMP Modules linked in: acpihp_drv acpihp_slot edd cpufreq_conservative cpufreq_userspace cpufreq_powersave acpi_cpufreq mperf fuse vfat fat loop dm_mod coretemp kvm crc32c_intel ipv6 ixgbe igb iTCO_wdt i7core_edac edac_core pcspkr iTCO_vendor_support ioatdma microcode joydev sr_mod i2c_i801 dca lpc_ich mfd_core mdio tpm_tis i2c_core hid_generic tpm cdrom sg tpm_bios rtc_cmos button ext3 jbd mbcache usbhid hid uhci_hcd ehci_hcd usbcore usb_common sd_mod crc_t10dif processor thermal_sys hwmon scsi_dh_alua scsi_dh_hp_sw scsi_dh_rdac scsi_dh_emc scsi_dh ata_generic ata_piix libata megaraid_sas scsi_mod CPU 39 Pid: 6454, comm: sh Not tainted 3.7.0-rc1-acpihp-final+ #45 QCI QSSC-S4R/QSSC-S4R RIP: 0010:[] [] __phys_addr+0x88/0x90 RSP: 0018:ffff8804440d7c08 EFLAGS: 00010006 RAX: 0000000000000006 RBX: ffffea0012000000 RCX: 000000000000002c ... Signed-off-by: Jianguo Wu Signed-off-by: Jiang Liu Reviewd-by: Wen Congyang Acked-by: Johannes Weiner Reviewed-by: Yasuaki Ishimatsu Reviewed-by: Michal Hocko Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/sparse.c b/mm/sparse.c index fac95f2..a83de2f 100644 --- a/mm/sparse.c +++ b/mm/sparse.c @@ -617,7 +617,7 @@ static void __kfree_section_memmap(struct page *memmap, unsigned long nr_pages) { return; /* XXX: Not implemented yet */ } -static void free_map_bootmem(struct page *page, unsigned long nr_pages) +static void free_map_bootmem(struct page *memmap, unsigned long nr_pages) { } #else @@ -658,10 +658,11 @@ static void __kfree_section_memmap(struct page *memmap, unsigned long nr_pages) get_order(sizeof(struct page) * nr_pages)); } -static void free_map_bootmem(struct page *page, unsigned long nr_pages) +static void free_map_bootmem(struct page *memmap, unsigned long nr_pages) { unsigned long maps_section_nr, removing_section_nr, i; unsigned long magic; + struct page *page = virt_to_page(memmap); for (i = 0; i < nr_pages; i++, page++) { magic = (unsigned long) page->lru.next; @@ -710,13 +711,10 @@ static void free_section_usemap(struct page *memmap, unsigned long *usemap) */ if (memmap) { - struct page *memmap_page; - memmap_page = virt_to_page(memmap); - nr_pages = PAGE_ALIGN(PAGES_PER_SECTION * sizeof(struct page)) >> PAGE_SHIFT; - free_map_bootmem(memmap_page, nr_pages); + free_map_bootmem(memmap, nr_pages); } } -- cgit v0.10.2 From 60cefed485a02bd99b6299dad70666fe49245da7 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 29 Nov 2012 13:54:23 -0800 Subject: mm: vmscan: fix endless loop in kswapd balancing Kswapd does not in all places have the same criteria for a balanced zone. Zones are only being reclaimed when their high watermark is breached, but compaction checks loop over the zonelist again when the zone does not meet the low watermark plus two times the size of the allocation. This gets kswapd stuck in an endless loop over a small zone, like the DMA zone, where the high watermark is smaller than the compaction requirement. Add a function, zone_balanced(), that checks the watermark, and, for higher order allocations, if compaction has enough free memory. Then use it uniformly to check for balanced zones. This makes sure that when the compaction watermark is not met, at least reclaim happens and progress is made - or the zone is declared unreclaimable at some point and skipped entirely. Signed-off-by: Johannes Weiner Reported-by: George Spelvin Reported-by: Johannes Hirte Reported-by: Tomas Racek Tested-by: Johannes Hirte Reviewed-by: Rik van Riel Cc: Mel Gorman Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index cbf84e1..83f4d0e 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2414,6 +2414,19 @@ static void age_active_anon(struct zone *zone, struct scan_control *sc) } while (memcg); } +static bool zone_balanced(struct zone *zone, int order, + unsigned long balance_gap, int classzone_idx) +{ + if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone) + + balance_gap, classzone_idx, 0)) + return false; + + if (COMPACTION_BUILD && order && !compaction_suitable(zone, order)) + return false; + + return true; +} + /* * pgdat_balanced is used when checking if a node is balanced for high-order * allocations. Only zones that meet watermarks and are in a zone allowed @@ -2492,8 +2505,7 @@ static bool prepare_kswapd_sleep(pg_data_t *pgdat, int order, long remaining, continue; } - if (!zone_watermark_ok_safe(zone, order, high_wmark_pages(zone), - i, 0)) + if (!zone_balanced(zone, order, 0, i)) all_zones_ok = false; else balanced += zone->present_pages; @@ -2602,8 +2614,7 @@ loop_again: break; } - if (!zone_watermark_ok_safe(zone, order, - high_wmark_pages(zone), 0, 0)) { + if (!zone_balanced(zone, order, 0, 0)) { end_zone = i; break; } else { @@ -2679,9 +2690,8 @@ loop_again: testorder = 0; if ((buffer_heads_over_limit && is_highmem_idx(i)) || - !zone_watermark_ok_safe(zone, testorder, - high_wmark_pages(zone) + balance_gap, - end_zone, 0)) { + !zone_balanced(zone, testorder, + balance_gap, end_zone)) { shrink_zone(zone, &sc); reclaim_state->reclaimed_slab = 0; @@ -2708,8 +2718,7 @@ loop_again: continue; } - if (!zone_watermark_ok_safe(zone, testorder, - high_wmark_pages(zone), end_zone, 0)) { + if (!zone_balanced(zone, testorder, 0, end_zone)) { all_zones_ok = 0; /* * We are still under min water mark. This -- cgit v0.10.2 From a50915394f1fc02c2861d3b7ce7014788aa5066e Mon Sep 17 00:00:00 2001 From: Andrew Morton Date: Thu, 29 Nov 2012 13:54:27 -0800 Subject: revert "Revert "mm: remove __GFP_NO_KSWAPD"" It apepars that this patch was innocent, and we hope that "mm: avoid waking kswapd for THP allocations when compaction is deferred or contended" will fix the final kswapd-spinning cause. Cc: Zdenek Kabelac Cc: Seth Jennings Cc: Valdis Kletnieks Cc: Jiri Slaby Cc: Rik van Riel Cc: Robert Jennings Cc: Mel Gorman Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index ec794a7..374c46d 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1077,8 +1077,7 @@ EXPORT_SYMBOL_GPL(mtd_writev); * until the request succeeds or until the allocation size falls below * the system page size. This attempts to make sure it does not adversely * impact system performance, so when allocating more than one page, we - * ask the memory allocator to avoid re-trying, swapping, writing back - * or performing I/O. + * ask the memory allocator to avoid re-trying. * * Note, this function also makes sure that the allocated buffer is aligned to * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value. @@ -1092,8 +1091,7 @@ EXPORT_SYMBOL_GPL(mtd_writev); */ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) { - gfp_t flags = __GFP_NOWARN | __GFP_WAIT | - __GFP_NORETRY | __GFP_NO_KSWAPD; + gfp_t flags = __GFP_NOWARN | __GFP_WAIT | __GFP_NORETRY; size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE); void *kbuf; diff --git a/include/linux/gfp.h b/include/linux/gfp.h index d0a7967..76e1aa2 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -30,10 +30,9 @@ struct vm_area_struct; #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u -#define ___GFP_NOTRACK 0x200000u -#define ___GFP_NO_KSWAPD 0x400000u -#define ___GFP_OTHER_NODE 0x800000u -#define ___GFP_WRITE 0x1000000u +#define ___GFP_NOTRACK 0x100000u +#define ___GFP_OTHER_NODE 0x200000u +#define ___GFP_WRITE 0x400000u /* * GFP bitmasks.. @@ -86,7 +85,6 @@ struct vm_area_struct; #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) /* Don't track with kmemcheck */ -#define __GFP_NO_KSWAPD ((__force gfp_t)___GFP_NO_KSWAPD) #define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */ #define __GFP_WRITE ((__force gfp_t)___GFP_WRITE) /* Allocator intends to dirty page */ @@ -96,7 +94,7 @@ struct vm_area_struct; */ #define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK) -#define __GFP_BITS_SHIFT 25 /* Room for N __GFP_FOO bits */ +#define __GFP_BITS_SHIFT 23 /* Room for N __GFP_FOO bits */ #define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1)) /* This equals 0, but use constants in case they ever change */ @@ -116,8 +114,7 @@ struct vm_area_struct; __GFP_MOVABLE) #define GFP_IOFS (__GFP_IO | __GFP_FS) #define GFP_TRANSHUGE (GFP_HIGHUSER_MOVABLE | __GFP_COMP | \ - __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \ - __GFP_NO_KSWAPD) + __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN) #ifdef CONFIG_NUMA #define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY) diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h index d6fd8e5..9391706 100644 --- a/include/trace/events/gfpflags.h +++ b/include/trace/events/gfpflags.h @@ -36,7 +36,6 @@ {(unsigned long)__GFP_RECLAIMABLE, "GFP_RECLAIMABLE"}, \ {(unsigned long)__GFP_MOVABLE, "GFP_MOVABLE"}, \ {(unsigned long)__GFP_NOTRACK, "GFP_NOTRACK"}, \ - {(unsigned long)__GFP_NO_KSWAPD, "GFP_NO_KSWAPD"}, \ {(unsigned long)__GFP_OTHER_NODE, "GFP_OTHER_NODE"} \ ) : "GFP_NOWAIT" diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 7e208f0..8193809 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2416,9 +2416,8 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, goto nopage; restart: - if (!(gfp_mask & __GFP_NO_KSWAPD)) - wake_all_kswapd(order, zonelist, high_zoneidx, - zone_idx(preferred_zone)); + wake_all_kswapd(order, zonelist, high_zoneidx, + zone_idx(preferred_zone)); /* * OK, we're below the kswapd watermark and have kicked background @@ -2495,7 +2494,7 @@ rebalance: * system then fail the allocation instead of entering direct reclaim. */ if ((deferred_compaction || contended_compaction) && - (gfp_mask & __GFP_NO_KSWAPD)) + (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE) goto nopage; /* Try direct reclaim and then allocating */ -- cgit v0.10.2 From 782fd30406ecb9d9b082816abe0c6008fc72a7b0 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 29 Nov 2012 13:54:30 -0800 Subject: mm: avoid waking kswapd for THP allocations when compaction is deferred or contended With "mm: vmscan: scale number of pages reclaimed by reclaim/compaction based on failures" reverted, Zdenek Kabelac reported the following Hmm, so it's just took longer to hit the problem and observe kswapd0 spinning on my CPU again - it's not as endless like before - but still it easily eats minutes - it helps to turn off Firefox or TB (memory hungry apps) so kswapd0 stops soon - and restart those apps again. (And I still have like >1GB of cached memory) kswapd0 R running task 0 30 2 0x00000000 Call Trace: preempt_schedule+0x42/0x60 _raw_spin_unlock+0x55/0x60 put_super+0x31/0x40 drop_super+0x22/0x30 prune_super+0x149/0x1b0 shrink_slab+0xba/0x510 The sysrq+m indicates the system has no swap so it'll never reclaim anonymous pages as part of reclaim/compaction. That is one part of the problem but not the root cause as file-backed pages could also be reclaimed. The likely underlying problem is that kswapd is woken up or kept awake for each THP allocation request in the page allocator slow path. If compaction fails for the requesting process then compaction will be deferred for a time and direct reclaim is avoided. However, if there are a storm of THP requests that are simply rejected, it will still be the the case that kswapd is awake for a prolonged period of time as pgdat->kswapd_max_order is updated each time. This is noticed by the main kswapd() loop and it will not call kswapd_try_to_sleep(). Instead it will loopp, shrinking a small number of pages and calling shrink_slab() on each iteration. This patch defers when kswapd gets woken up for THP allocations. For !THP allocations, kswapd is always woken up. For THP allocations, kswapd is woken up iff the process is willing to enter into direct reclaim/compaction. [akpm@linux-foundation.org: fix typo in comment] Signed-off-by: Mel Gorman Cc: Zdenek Kabelac Cc: Seth Jennings Cc: Jiri Slaby Cc: Rik van Riel Cc: Robert Jennings Cc: Valdis Kletnieks Cc: Glauber Costa Cc: Johannes Weiner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 8193809..a8f2c87 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2378,6 +2378,15 @@ bool gfp_pfmemalloc_allowed(gfp_t gfp_mask) return !!(gfp_to_alloc_flags(gfp_mask) & ALLOC_NO_WATERMARKS); } +/* Returns true if the allocation is likely for THP */ +static bool is_thp_alloc(gfp_t gfp_mask, unsigned int order) +{ + if (order == pageblock_order && + (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE) + return true; + return false; +} + static inline struct page * __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, enum zone_type high_zoneidx, @@ -2416,7 +2425,9 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, goto nopage; restart: - wake_all_kswapd(order, zonelist, high_zoneidx, + /* The decision whether to wake kswapd for THP is made later */ + if (!is_thp_alloc(gfp_mask, order)) + wake_all_kswapd(order, zonelist, high_zoneidx, zone_idx(preferred_zone)); /* @@ -2487,15 +2498,21 @@ rebalance: goto got_pg; sync_migration = true; - /* - * If compaction is deferred for high-order allocations, it is because - * sync compaction recently failed. In this is the case and the caller - * requested a movable allocation that does not heavily disrupt the - * system then fail the allocation instead of entering direct reclaim. - */ - if ((deferred_compaction || contended_compaction) && - (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE) - goto nopage; + if (is_thp_alloc(gfp_mask, order)) { + /* + * If compaction is deferred for high-order allocations, it is + * because sync compaction recently failed. If this is the case + * and the caller requested a movable allocation that does not + * heavily disrupt the system then fail the allocation instead + * of entering direct reclaim. + */ + if (deferred_compaction || contended_compaction) + goto nopage; + + /* If process is willing to reclaim/compact then wake kswapd */ + wake_all_kswapd(order, zonelist, high_zoneidx, + zone_idx(preferred_zone)); + } /* Try direct reclaim and then allocating */ page = __alloc_pages_direct_reclaim(gfp_mask, order, -- cgit v0.10.2 From 783657a7dc20e5c0efbc9a09a9dd38e238a723da Mon Sep 17 00:00:00 2001 From: Naoya Horiguchi Date: Thu, 29 Nov 2012 13:54:34 -0800 Subject: mm: soft offline: split thp at the beginning of soft_offline_page() When we try to soft-offline a thp tail page, put_page() is called on the tail page unthinkingly and VM_BUG_ON is triggered in put_compound_page(). This patch splits thp before going into the main body of soft-offlining. Signed-off-by: Naoya Horiguchi Cc: Andi Kleen Cc: Tony Luck Cc: Andi Kleen Cc: Wu Fengguang Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/mm/memory-failure.c b/mm/memory-failure.c index 6c5899b..8b20278 100644 --- a/mm/memory-failure.c +++ b/mm/memory-failure.c @@ -1476,9 +1476,17 @@ int soft_offline_page(struct page *page, int flags) { int ret; unsigned long pfn = page_to_pfn(page); + struct page *hpage = compound_trans_head(page); if (PageHuge(page)) return soft_offline_huge_page(page, flags); + if (PageTransHuge(hpage)) { + if (PageAnon(hpage) && unlikely(split_huge_page(hpage))) { + pr_info("soft offline: %#lx: failed to split THP\n", + pfn); + return -EBUSY; + } + } ret = get_any_page(page, pfn, flags); if (ret < 0) -- cgit v0.10.2 From 1430e17844e2cd15bc15f3c21b5349e762f6ba41 Mon Sep 17 00:00:00 2001 From: "Kim, Milo" Date: Thu, 29 Nov 2012 13:54:36 -0800 Subject: drivers/rtc/rtc-tps65910.c: fix invalid pointer access on _remove() The tps65910_rtc data is registered as the platform driver data in _probe(= ). Therefore the tps65910_rtc should be used on unregistering the rtc device. And device pointer should be retrieved from the platform_device structure. This patch fixes the below oops: Unable to handle kernel NULL pointer dereference at virtual address 00000008 Modules linked in: rtc_tps65910(-) CPU: 0 Not tainted (3.7.0-rc7-next-20121128-g6b1f974-dirty #7) PC is at tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910] (tps65910_rtc_alarm_irq_enable+0x20/0x2c [rtc_tps65910]) (tps65910_rtc_remove+0x18/0x28 [rtc_tps65910]) (platform_drv_remove+0x18/0x1c) (__device_release_driver+0x70/0xcc) (driver_detach+0xb4/0xb8) (bus_remove_driver+0x7c/0xc0) (sys_delete_module+0x148/0x21c) Signed-off-by: Milo(Woogyom) Kim Cc: Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/rtc/rtc-tps65910.c b/drivers/rtc/rtc-tps65910.c index 7a82337..073108d 100644 --- a/drivers/rtc/rtc-tps65910.c +++ b/drivers/rtc/rtc-tps65910.c @@ -288,11 +288,11 @@ static int __devinit tps65910_rtc_probe(struct platform_device *pdev) static int __devexit tps65910_rtc_remove(struct platform_device *pdev) { /* leave rtc running, but disable irqs */ - struct rtc_device *rtc = platform_get_drvdata(pdev); + struct tps65910_rtc *tps_rtc = platform_get_drvdata(pdev); - tps65910_rtc_alarm_irq_enable(&rtc->dev, 0); + tps65910_rtc_alarm_irq_enable(&pdev->dev, 0); - rtc_device_unregister(rtc); + rtc_device_unregister(tps_rtc->rtc); return 0; } -- cgit v0.10.2 From 644c154186386bb1fa6446bc5e037b9ed098db46 Mon Sep 17 00:00:00 2001 From: Vincent Palatin Date: Fri, 30 Nov 2012 12:15:32 -0800 Subject: x86, fpu: Avoid FPU lazy restore after suspend When a cpu enters S3 state, the FPU state is lost. After resuming for S3, if we try to lazy restore the FPU for a process running on the same CPU, this will result in a corrupted FPU context. Ensure that "fpu_owner_task" is properly invalided when (re-)initializing a CPU, so nobody will try to lazy restore a state which doesn't exist in the hardware. Tested with a 64-bit kernel on a 4-core Ivybridge CPU with eagerfpu=off, by doing thousands of suspend/resume cycles with 4 processes doing FPU operations running. Without the patch, a process is killed after a few hundreds cycles by a SIGFPE. Cc: Duncan Laurie Cc: Olof Johansson Cc: v3.4+ # for 3.4 need to replace this_cpu_write by percpu_write Signed-off-by: Vincent Palatin Link: http://lkml.kernel.org/r/1354306532-1014-1-git-send-email-vpalatin@chromium.org Signed-off-by: H. Peter Anvin diff --git a/arch/x86/include/asm/fpu-internal.h b/arch/x86/include/asm/fpu-internal.h index 831dbb9..41ab26e 100644 --- a/arch/x86/include/asm/fpu-internal.h +++ b/arch/x86/include/asm/fpu-internal.h @@ -399,14 +399,17 @@ static inline void drop_init_fpu(struct task_struct *tsk) typedef struct { int preload; } fpu_switch_t; /* - * FIXME! We could do a totally lazy restore, but we need to - * add a per-cpu "this was the task that last touched the FPU - * on this CPU" variable, and the task needs to have a "I last - * touched the FPU on this CPU" and check them. + * Must be run with preemption disabled: this clears the fpu_owner_task, + * on this CPU. * - * We don't do that yet, so "fpu_lazy_restore()" always returns - * false, but some day.. + * This will disable any lazy FPU state restore of the current FPU state, + * but if the current thread owns the FPU, it will still be saved by. */ +static inline void __cpu_disable_lazy_restore(unsigned int cpu) +{ + per_cpu(fpu_owner_task, cpu) = NULL; +} + static inline int fpu_lazy_restore(struct task_struct *new, unsigned int cpu) { return new == this_cpu_read_stable(fpu_owner_task) && diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index c80a33b..f3e2ec8 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -68,6 +68,8 @@ #include #include #include +#include +#include #include #include #include @@ -818,6 +820,9 @@ int __cpuinit native_cpu_up(unsigned int cpu, struct task_struct *tidle) per_cpu(cpu_state, cpu) = CPU_UP_PREPARE; + /* the FPU context is blank, nobody can own it */ + __cpu_disable_lazy_restore(cpu); + err = do_boot_cpu(apicid, cpu, tidle); if (err) { pr_debug("do_boot_cpu failed %d\n", err); -- cgit v0.10.2 From 412d32e6c98527078779e5b515823b2810e40324 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Wed, 28 Nov 2012 07:17:18 +0100 Subject: workqueue: exit rescuer_thread() as TASK_RUNNING A rescue thread exiting TASK_INTERRUPTIBLE can lead to a task scheduling off, never to be seen again. In the case where this occurred, an exiting thread hit reiserfs homebrew conditional resched while holding a mutex, bringing the box to its knees. PID: 18105 TASK: ffff8807fd412180 CPU: 5 COMMAND: "kdmflush" #0 [ffff8808157e7670] schedule at ffffffff8143f489 #1 [ffff8808157e77b8] reiserfs_get_block at ffffffffa038ab2d [reiserfs] #2 [ffff8808157e79a8] __block_write_begin at ffffffff8117fb14 #3 [ffff8808157e7a98] reiserfs_write_begin at ffffffffa0388695 [reiserfs] #4 [ffff8808157e7ad8] generic_perform_write at ffffffff810ee9e2 #5 [ffff8808157e7b58] generic_file_buffered_write at ffffffff810eeb41 #6 [ffff8808157e7ba8] __generic_file_aio_write at ffffffff810f1a3a #7 [ffff8808157e7c58] generic_file_aio_write at ffffffff810f1c88 #8 [ffff8808157e7cc8] do_sync_write at ffffffff8114f850 #9 [ffff8808157e7dd8] do_acct_process at ffffffff810a268f [exception RIP: kernel_thread_helper] RIP: ffffffff8144a5c0 RSP: ffff8808157e7f58 RFLAGS: 00000202 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff8107af60 RDI: ffff8803ee491d18 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 Signed-off-by: Mike Galbraith Signed-off-by: Tejun Heo Cc: stable@vger.kernel.org diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 042d221..ac25db1 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2407,8 +2407,10 @@ static int rescuer_thread(void *__wq) repeat: set_current_state(TASK_INTERRUPTIBLE); - if (kthread_should_stop()) + if (kthread_should_stop()) { + __set_current_state(TASK_RUNNING); return 0; + } /* * See whether any cpu is asking for help. Unbounded -- cgit v0.10.2 From 8852aac25e79e38cc6529f20298eed154f60b574 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Sat, 1 Dec 2012 16:23:42 -0800 Subject: workqueue: mod_delayed_work_on() shouldn't queue timer on 0 delay 8376fe22c7 ("workqueue: implement mod_delayed_work[_on]()") implemented mod_delayed_work[_on]() using the improved try_to_grab_pending(). The function is later used, among others, to replace [__]candel_delayed_work() + queue_delayed_work() combinations. Unfortunately, a delayed_work item w/ zero @delay is handled slightly differently by mod_delayed_work_on() compared to queue_delayed_work_on(). The latter skips timer altogether and directly queues it using queue_work_on() while the former schedules timer which will expire on the closest tick. This means, when @delay is zero, that [__]cancel_delayed_work() + queue_delayed_work_on() makes the target item immediately executable while mod_delayed_work_on() may induce delay of upto a full tick. This somewhat subtle difference breaks some of the converted users. e.g. block queue plugging uses delayed_work for deferred processing and uses mod_delayed_work_on() when the queue needs to be immediately unplugged. The above problem manifested as noticeably higher number of context switches under certain circumstances. The difference in behavior was caused by missing special case handling for 0 delay in mod_delayed_work_on() compared to queue_delayed_work_on(). Joonsoo Kim posted a patch to add it - ("workqueue: optimize mod_delayed_work_on() when @delay == 0")[1]. The patch was queued for 3.8 but it was described as optimization and I missed that it was a correctness issue. As both queue_delayed_work_on() and mod_delayed_work_on() use __queue_delayed_work() for queueing, it seems that the better approach is to move the 0 delay special handling to the function instead of duplicating it in mod_delayed_work_on(). Fix the problem by moving 0 delay special case handling from queue_delayed_work_on() to __queue_delayed_work(). This replaces Joonsoo's patch. [1] http://thread.gmane.org/gmane.linux.kernel/1379011/focus=1379012 Signed-off-by: Tejun Heo Reported-and-tested-by: Anders Kaseorg Reported-and-tested-by: Zlatko Calusic LKML-Reference: LKML-Reference: <50A78AA9.5040904@iskon.hr> Cc: Joonsoo Kim diff --git a/kernel/workqueue.c b/kernel/workqueue.c index ac25db1..084aa47 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1364,6 +1364,17 @@ static void __queue_delayed_work(int cpu, struct workqueue_struct *wq, BUG_ON(timer_pending(timer)); BUG_ON(!list_empty(&work->entry)); + /* + * If @delay is 0, queue @dwork->work immediately. This is for + * both optimization and correctness. The earliest @timer can + * expire is on the closest next tick and delayed_work users depend + * on that there's no such delay when @delay is 0. + */ + if (!delay) { + __queue_work(cpu, wq, &dwork->work); + return; + } + timer_stats_timer_set_start_info(&dwork->timer); /* @@ -1417,9 +1428,6 @@ bool queue_delayed_work_on(int cpu, struct workqueue_struct *wq, bool ret = false; unsigned long flags; - if (!delay) - return queue_work_on(cpu, wq, &dwork->work); - /* read the comment in __queue_work() */ local_irq_save(flags); -- cgit v0.10.2 From 64022d0b4e93ea432e95db55a72b8a1c5775f3c0 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Sat, 1 Dec 2012 13:07:02 +0000 Subject: tcp: fix crashes in do_tcp_sendpages() Recent network changes allowed high order pages being used for skb fragments. This uncovered a bug in do_tcp_sendpages() which was assuming its caller provided an array of order-0 page pointers. We only have to deal with a single page in this function, and its order is irrelevant. Reported-by: Willy Tarreau Tested-by: Willy Tarreau Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c index 083092e..e457c7a 100644 --- a/net/ipv4/tcp.c +++ b/net/ipv4/tcp.c @@ -830,8 +830,8 @@ static int tcp_send_mss(struct sock *sk, int *size_goal, int flags) return mss_now; } -static ssize_t do_tcp_sendpages(struct sock *sk, struct page **pages, int poffset, - size_t psize, int flags) +static ssize_t do_tcp_sendpages(struct sock *sk, struct page *page, int offset, + size_t size, int flags) { struct tcp_sock *tp = tcp_sk(sk); int mss_now, size_goal; @@ -858,12 +858,9 @@ static ssize_t do_tcp_sendpages(struct sock *sk, struct page **pages, int poffse if (sk->sk_err || (sk->sk_shutdown & SEND_SHUTDOWN)) goto out_err; - while (psize > 0) { + while (size > 0) { struct sk_buff *skb = tcp_write_queue_tail(sk); - struct page *page = pages[poffset / PAGE_SIZE]; int copy, i; - int offset = poffset % PAGE_SIZE; - int size = min_t(size_t, psize, PAGE_SIZE - offset); bool can_coalesce; if (!tcp_send_head(sk) || (copy = size_goal - skb->len) <= 0) { @@ -912,8 +909,8 @@ new_segment: TCP_SKB_CB(skb)->tcp_flags &= ~TCPHDR_PSH; copied += copy; - poffset += copy; - if (!(psize -= copy)) + offset += copy; + if (!(size -= copy)) goto out; if (skb->len < size_goal || (flags & MSG_OOB)) @@ -960,7 +957,7 @@ int tcp_sendpage(struct sock *sk, struct page *page, int offset, flags); lock_sock(sk); - res = do_tcp_sendpages(sk, &page, offset, size, flags); + res = do_tcp_sendpages(sk, page, offset, size, flags); release_sock(sk); return res; } -- cgit v0.10.2 From 892a925e42adb8192a3c832ad29cbc780fc466f6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?fran=C3=A7ois=20romieu?= Date: Sat, 1 Dec 2012 13:08:50 +0000 Subject: 8139cp: fix coherent mapping leak in error path. cp_open [...] rc = cp_alloc_rings(cp); if (rc) return rc; cp_alloc_rings [...] mem = dma_alloc_coherent(&cp->pdev->dev, CP_RING_BYTES, &cp->ring_dma, GFP_KERNEL); - cp_alloc_rings never frees the coherent mapping it allocates - neither do cp_open when cp_alloc_rings fails Signed-off-by: Francois Romieu Signed-off-by: David S. Miller diff --git a/drivers/net/ethernet/realtek/8139cp.c b/drivers/net/ethernet/realtek/8139cp.c index b01f83a..609125a 100644 --- a/drivers/net/ethernet/realtek/8139cp.c +++ b/drivers/net/ethernet/realtek/8139cp.c @@ -1060,17 +1060,22 @@ static int cp_init_rings (struct cp_private *cp) static int cp_alloc_rings (struct cp_private *cp) { + struct device *d = &cp->pdev->dev; void *mem; + int rc; - mem = dma_alloc_coherent(&cp->pdev->dev, CP_RING_BYTES, - &cp->ring_dma, GFP_KERNEL); + mem = dma_alloc_coherent(d, CP_RING_BYTES, &cp->ring_dma, GFP_KERNEL); if (!mem) return -ENOMEM; cp->rx_ring = mem; cp->tx_ring = &cp->rx_ring[CP_RX_RING_SIZE]; - return cp_init_rings(cp); + rc = cp_init_rings(cp); + if (rc < 0) + dma_free_coherent(d, CP_RING_BYTES, cp->rx_ring, cp->ring_dma); + + return rc; } static void cp_clean_rings (struct cp_private *cp) -- cgit v0.10.2 From 9d73fc2d641f8831c9dc803177fe47c02120cc36 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Sun, 2 Dec 2012 17:55:07 +0000 Subject: open*(2) compat fixes (s390, arm64) The usual rules for open()/openat()/open_by_handle_at() are 1) native 32bit - don't force O_LARGEFILE in flags 2) native 64bit - force O_LARGEFILE in flags 3) compat on 64bit host - as for native 32bit 4) native 32bit ABI for 64bit system (mips/n32, x86/x32) - as for native 64bit There are only two exceptions - s390 compat has open() forcing O_LARGEFILE and arm64 compat has open_by_handle_at() doing the same thing. The same binaries on native host (s390/31 and arm resp.) will *not* force O_LARGEFILE, so IMO both are emulation bugs. Objections? The fix is obvious... Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index 6d909fa..656a6f2 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -392,7 +392,7 @@ __SYSCALL(367, sys_fanotify_init) __SYSCALL(368, compat_sys_fanotify_mark_wrapper) __SYSCALL(369, sys_prlimit64) __SYSCALL(370, sys_name_to_handle_at) -__SYSCALL(371, sys_open_by_handle_at) +__SYSCALL(371, compat_sys_open_by_handle_at) __SYSCALL(372, sys_clock_adjtime) __SYSCALL(373, sys_syncfs) diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index ad79b84..827e094 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -28,7 +28,7 @@ ENTRY(sys32_open_wrapper) llgtr %r2,%r2 # const char * lgfr %r3,%r3 # int lgfr %r4,%r4 # int - jg sys_open # branch to system call + jg compat_sys_open # branch to system call ENTRY(sys32_close_wrapper) llgfr %r2,%r2 # unsigned int -- cgit v0.10.2 From cbdbf2abb7844548a7d7a6a2ae7af6b6fbcea401 Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 23 Nov 2012 12:08:15 +0000 Subject: linux/kernel.h: define SYMBOL_PREFIX Define SYMBOL_PREFIX to be the same as CONFIG_SYMBOL_PREFIX if set by the architecture, or "" otherwise. This avoids the need for ugly #ifdefs whenever symbols are referenced in asm blocks. Signed-off-by: James Hogan Cc: Andrew Morton Cc: Joe Perches Cc: Paul Gortmaker Cc: Jean Delvare Cc: Ralf Baechle Cc: Mike Frysinger Signed-off-by: Rusty Russell diff --git a/include/linux/kernel.h b/include/linux/kernel.h index a123b13..7d8dfc7 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -701,6 +701,13 @@ static inline void ftrace_dump(enum ftrace_dump_mode oops_dump_mode) { } #define COMPACTION_BUILD 0 #endif +/* This helps us to avoid #ifdef CONFIG_SYMBOL_PREFIX */ +#ifdef CONFIG_SYMBOL_PREFIX +#define SYMBOL_PREFIX CONFIG_SYMBOL_PREFIX +#else +#define SYMBOL_PREFIX "" +#endif + /* Rebuild everything on CONFIG_FTRACE_MCOUNT_RECORD */ #ifdef CONFIG_FTRACE_MCOUNT_RECORD # define REBUILD_DUE_TO_FTRACE_MCOUNT_RECORD -- cgit v0.10.2 From 84ecfd15f5547c992c901df6ec14b4d507eb2c6e Mon Sep 17 00:00:00 2001 From: James Hogan Date: Fri, 23 Nov 2012 12:08:16 +0000 Subject: modsign: add symbol prefix to certificate list Add the arch symbol prefix (if applicable) to the asm definition of modsign_certificate_list and modsign_certificate_list_end. This uses the recently defined SYMBOL_PREFIX which is derived from CONFIG_SYMBOL_PREFIX. This fixes the build of module signing on the blackfin and metag architectures. Signed-off-by: James Hogan Cc: Rusty Russell Cc: David Howells Cc: Mike Frysinger Signed-off-by: Rusty Russell diff --git a/kernel/modsign_pubkey.c b/kernel/modsign_pubkey.c index 4646eb2..767e559 100644 --- a/kernel/modsign_pubkey.c +++ b/kernel/modsign_pubkey.c @@ -21,10 +21,10 @@ struct key *modsign_keyring; extern __initdata const u8 modsign_certificate_list[]; extern __initdata const u8 modsign_certificate_list_end[]; asm(".section .init.data,\"aw\"\n" - "modsign_certificate_list:\n" + SYMBOL_PREFIX "modsign_certificate_list:\n" ".incbin \"signing_key.x509\"\n" ".incbin \"extra_certificates\"\n" - "modsign_certificate_list_end:" + SYMBOL_PREFIX "modsign_certificate_list_end:" ); /* -- cgit v0.10.2 From fd8ef11730f1d03d5d6555aa53126e9e34f52f12 Mon Sep 17 00:00:00 2001 From: Mike Galbraith Date: Mon, 3 Dec 2012 06:25:25 +0100 Subject: Revert "sched, autogroup: Stop going ahead if autogroup is disabled" This reverts commit 800d4d30c8f20bd728e5741a3b77c4859a613f7c. Between commits 8323f26ce342 ("sched: Fix race in task_group()") and 800d4d30c8f2 ("sched, autogroup: Stop going ahead if autogroup is disabled"), autogroup is a wreck. With both applied, all you have to do to crash a box is disable autogroup during boot up, then reboot.. boom, NULL pointer dereference due to commit 800d4d30c8f2 not allowing autogroup to move things, and commit 8323f26ce342 making that the only way to switch runqueues: BUG: unable to handle kernel NULL pointer dereference at (null) IP: [] effective_load.isra.43+0x50/0x90 Pid: 7047, comm: systemd-user-se Not tainted 3.6.8-smp #7 MEDIONPC MS-7502/MS-7502 RIP: effective_load.isra.43+0x50/0x90 Process systemd-user-se (pid: 7047, threadinfo ffff880221dde000, task ffff88022618b3a0) Call Trace: select_task_rq_fair+0x255/0x780 try_to_wake_up+0x156/0x2c0 wake_up_state+0xb/0x10 signal_wake_up+0x28/0x40 complete_signal+0x1d6/0x250 __send_signal+0x170/0x310 send_signal+0x40/0x80 do_send_sig_info+0x47/0x90 group_send_sig_info+0x4a/0x70 kill_pid_info+0x3a/0x60 sys_kill+0x97/0x1a0 ? vfs_read+0x120/0x160 ? sys_read+0x45/0x90 system_call_fastpath+0x16/0x1b Code: 49 0f af 41 50 31 d2 49 f7 f0 48 83 f8 01 48 0f 46 c6 48 2b 07 48 8b bf 40 01 00 00 48 85 ff 74 3a 45 31 c0 48 8b 8f 50 01 00 00 <48> 8b 11 4c 8b 89 80 00 00 00 49 89 d2 48 01 d0 45 8b 59 58 4c RIP [] effective_load.isra.43+0x50/0x90 RSP CR2: 0000000000000000 Signed-off-by: Mike Galbraith Acked-by: Ingo Molnar Cc: Yong Zhang Cc: Peter Zijlstra Cc: stable@vger.kernel.org # 2.6.39+ Signed-off-by: Linus Torvalds diff --git a/kernel/sched/auto_group.c b/kernel/sched/auto_group.c index 0984a21..15f60d0 100644 --- a/kernel/sched/auto_group.c +++ b/kernel/sched/auto_group.c @@ -143,15 +143,11 @@ autogroup_move_group(struct task_struct *p, struct autogroup *ag) p->signal->autogroup = autogroup_kref_get(ag); - if (!ACCESS_ONCE(sysctl_sched_autogroup_enabled)) - goto out; - t = p; do { sched_move_task(t); } while_each_thread(p, t); -out: unlock_task_sighand(p, &flags); autogroup_kref_put(prev); } diff --git a/kernel/sched/auto_group.h b/kernel/sched/auto_group.h index 8bd0471..443232e 100644 --- a/kernel/sched/auto_group.h +++ b/kernel/sched/auto_group.h @@ -4,11 +4,6 @@ #include struct autogroup { - /* - * reference doesn't mean how many thread attach to this - * autogroup now. It just stands for the number of task - * could use this autogroup. - */ struct kref kref; struct task_group *tg; struct rw_semaphore lock; -- cgit v0.10.2 From 25a3bc6bd1ca03ab504b8c55c98f8d0135644d53 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 3 Dec 2012 18:15:30 +0000 Subject: [parisc] open(2) compat bug In commit 9d73fc2d641f ("open*(2) compat fixes (s390, arm64)") I said: > > The usual rules for open()/openat()/open_by_handle_at() are > 1) native 32bit - don't force O_LARGEFILE in flags > 2) native 64bit - force O_LARGEFILE in flags > 3) compat on 64bit host - as for native 32bit > 4) native 32bit ABI for 64bit system (mips/n32, x86/x32) - as for native 64bit > > There are only two exceptions - s390 compat has open() forcing O_LARGEFILE and > arm64 compat has open_by_handle_at() doing the same thing. The same binaries > on native host (s390/31 and arm resp.) will *not* force O_LARGEFILE, so IMO > both are emulation bugs. Three exceptions, actually - parisc open() is another case like that. Native 32bit won't force O_LARGEFILE, the same binary on parisc64 will. Signed-off-by: Al Viro Signed-off-by: Linus Torvalds diff --git a/arch/parisc/kernel/syscall_table.S b/arch/parisc/kernel/syscall_table.S index 3735abd..cbf5d59 100644 --- a/arch/parisc/kernel/syscall_table.S +++ b/arch/parisc/kernel/syscall_table.S @@ -60,7 +60,7 @@ ENTRY_SAME(fork_wrapper) ENTRY_SAME(read) ENTRY_SAME(write) - ENTRY_SAME(open) /* 5 */ + ENTRY_COMP(open) /* 5 */ ENTRY_SAME(close) ENTRY_SAME(waitpid) ENTRY_SAME(creat) -- cgit v0.10.2 From de7531e8575ab383a0f5bb68b63e7891fce4765d Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 Dec 2012 11:17:57 -0800 Subject: sparc64: exit_group should kill register windows just like plain exit. Reported-by: Al Viro Signed-off-by: David S. Miller diff --git a/arch/sparc/kernel/sys32.S b/arch/sparc/kernel/sys32.S index 44025f4..8475a47 100644 --- a/arch/sparc/kernel/sys32.S +++ b/arch/sparc/kernel/sys32.S @@ -47,7 +47,7 @@ STUB: sra REG1, 0, REG1; \ sra REG4, 0, REG4 SIGN1(sys32_exit, sparc_exit, %o0) -SIGN1(sys32_exit_group, sys_exit_group, %o0) +SIGN1(sys32_exit_group, sparc_exit_group, %o0) SIGN1(sys32_wait4, compat_sys_wait4, %o2) SIGN1(sys32_creat, sys_creat, %o1) SIGN1(sys32_mknod, sys_mknod, %o1) diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S index 7f5f65d..bf23477 100644 --- a/arch/sparc/kernel/syscalls.S +++ b/arch/sparc/kernel/syscalls.S @@ -118,10 +118,20 @@ ret_from_syscall: ba,pt %xcc, ret_sys_call ldx [%sp + PTREGS_OFF + PT_V9_I0], %o0 + .globl sparc_exit_group + .type sparc_exit_group,#function +sparc_exit_group: + sethi %hi(sys_exit_group), %g7 + ba,pt %xcc, 1f + or %g7, %lo(sys_exit_group), %g7 + .size sparc_exit_group,.-sparc_exit_group + .globl sparc_exit .type sparc_exit,#function sparc_exit: - rdpr %pstate, %g2 + sethi %hi(sys_exit), %g7 + or %g7, %lo(sys_exit), %g7 +1: rdpr %pstate, %g2 wrpr %g2, PSTATE_IE, %pstate rdpr %otherwin, %g1 rdpr %cansave, %g3 @@ -129,7 +139,7 @@ sparc_exit: wrpr %g3, 0x0, %cansave wrpr %g0, 0x0, %otherwin wrpr %g2, 0x0, %pstate - ba,pt %xcc, sys_exit + jmpl %g7, %g0 stb %g0, [%g6 + TI_WSAVED] .size sparc_exit,.-sparc_exit diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index 1c9af9f..017b74a 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -133,7 +133,7 @@ sys_call_table: /*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents .word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr /*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall - .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_newuname + .word sys_setpgid, sys_fremovexattr, sys_tkill, sparc_exit_group, sys_newuname /*190*/ .word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl .word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask /*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall -- cgit v0.10.2 From b69f0859dc8e633c5d8c06845811588fe17e68b3 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 3 Dec 2012 11:22:37 -0800 Subject: Linux 3.7-rc8 diff --git a/Makefile b/Makefile index 6cab75b..346e28f 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc7 +EXTRAVERSION = -rc8 NAME = Terrified Chipmunk # *DOCUMENTATION* -- cgit v0.10.2 From 0032c857454581510de1ca12615de5e38e543c92 Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Mon, 3 Dec 2012 11:24:25 -0800 Subject: sparc: Fix piggyback with newer binutils. Newer versions of binutils mark '_end' as 'B' instead of 'A' for whatever reason. To be honest, the piggyback code doesn't actually care what kind of symbol _start and _end are, it just wants to find them and record the address. So remove the type from the match strings. Reported-by: Aaro Koskinen Signed-off-by: David S. Miller diff --git a/arch/sparc/boot/piggyback.c b/arch/sparc/boot/piggyback.c index c0a798f..bb7c951 100644 --- a/arch/sparc/boot/piggyback.c +++ b/arch/sparc/boot/piggyback.c @@ -81,18 +81,18 @@ static void usage(void) static int start_line(const char *line) { - if (strcmp(line + 8, " T _start\n") == 0) + if (strcmp(line + 10, " _start\n") == 0) return 1; - else if (strcmp(line + 16, " T _start\n") == 0) + else if (strcmp(line + 18, " _start\n") == 0) return 1; return 0; } static int end_line(const char *line) { - if (strcmp(line + 8, " A _end\n") == 0) + if (strcmp(line + 10, " _end\n") == 0) return 1; - else if (strcmp (line + 16, " A _end\n") == 0) + else if (strcmp (line + 18, " _end\n") == 0) return 1; return 0; } @@ -100,8 +100,8 @@ static int end_line(const char *line) /* * Find address for start and end in System.map. * The file looks like this: - * f0004000 T _start - * f0379f79 A _end + * f0004000 ... _start + * f0379f79 ... _end * 1234567890123456 * ^coloumn 1 * There is support for 64 bit addresses too. -- cgit v0.10.2 From ed4b7021cb51fe5a0f260df03298709347a26967 Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 3 Dec 2012 20:57:46 +0100 Subject: UBI: remove PEB from free tree in get_peb_for_wl() If UBI is built without fastmap, get_peb_for_wl() has to remove the PEB manially from the free tree. Otherwise the requested PEB lives in two trees. Reported-by: Zach Sadecki Signed-off-by: Richard Weinberger Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index da7b449..1f9f5f7 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -679,7 +679,13 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) #else static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) { - return find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF); + struct ubi_wl_entry *e; + + e = find_wl_entry(ubi, &ubi->free, WL_FREE_MAX_DIFF); + self_check_in_wl_tree(ubi, e, &ubi->free); + rb_erase(&e->u.rb, &ubi->free); + + return e; } int ubi_wl_get_peb(struct ubi_device *ubi) -- cgit v0.10.2 From 894aef215775b56b725e9dde856b7a8b091ddfcc Mon Sep 17 00:00:00 2001 From: Richard Weinberger Date: Mon, 3 Dec 2012 20:57:47 +0100 Subject: UBI: dont call ubi_self_check_all_ff() in __wl_get_peb() As ubi_self_check_all_ff() might sleep we are not allowed to call it from atomic context. For now we call it only from ubi_wl_get_peb(). There are some code paths where it would also make sense, but these paths are currently atomic and only enabled when fastmap is used. Signed-off-by: Richard Weinberger Signed-off-by: Artem Bityutskiy diff --git a/drivers/mtd/ubi/wl.c b/drivers/mtd/ubi/wl.c index 1f9f5f7..2144f61 100644 --- a/drivers/mtd/ubi/wl.c +++ b/drivers/mtd/ubi/wl.c @@ -498,7 +498,7 @@ out: * @ubi: UBI device description object * * This function returns a physical eraseblock in case of success and a - * negative error code in case of failure. Might sleep. + * negative error code in case of failure. */ static int __wl_get_peb(struct ubi_device *ubi) { @@ -540,13 +540,6 @@ retry: * ubi_wl_get_peb() after removing e from the pool. */ prot_queue_add(ubi, e); #endif - err = ubi_self_check_all_ff(ubi, e->pnum, ubi->vid_hdr_aloffset, - ubi->peb_size - ubi->vid_hdr_aloffset); - if (err) { - ubi_err("new PEB %d does not contain all 0xFF bytes", e->pnum); - return err; - } - return e->pnum; } @@ -690,12 +683,19 @@ static struct ubi_wl_entry *get_peb_for_wl(struct ubi_device *ubi) int ubi_wl_get_peb(struct ubi_device *ubi) { - int peb; + int peb, err; spin_lock(&ubi->wl_lock); peb = __wl_get_peb(ubi); spin_unlock(&ubi->wl_lock); + err = ubi_self_check_all_ff(ubi, peb, ubi->vid_hdr_aloffset, + ubi->peb_size - ubi->vid_hdr_aloffset); + if (err) { + ubi_err("new PEB %d does not contain all 0xFF bytes", peb); + return err; + } + return peb; } #endif -- cgit v0.10.2 From c1d390d8e6128b050f0f66b1c33d390760deb3f4 Mon Sep 17 00:00:00 2001 From: Xiaotian Feng Date: Tue, 4 Dec 2012 19:33:54 +0800 Subject: megaraid: fix BUG_ON() from incorrect use of delayed work megaraid use INIT_WORK to declare a hotplug_work, but cast the hotplug_work from work_struct to delayed_work and schedule_delayed_work on it. This is very dangerous, as other part of delayed_work might be kernel memories allocated by others. With commit 8852aac ("workqueue: mod_delayed_work_on() shouldn't queue timer on 0 delay"), schedule_delayed_work() will check dwork->timer before queue_work even when @delay is 0, this causes megaraid code to hit the BUG_ON() in workqueue code. Change megaraid code to use delayed work. Signed-off-by: Xiaotian Feng Signed-off-by: Tejun Heo Cc: Neela Syam Kolli Cc: "James E.J. Bottomley" Cc: linux-scsi@vger.kernel.org diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h index 16b7a72..3b2365c 100644 --- a/drivers/scsi/megaraid/megaraid_sas.h +++ b/drivers/scsi/megaraid/megaraid_sas.h @@ -1276,7 +1276,7 @@ struct megasas_evt_detail { } __attribute__ ((packed)); struct megasas_aen_event { - struct work_struct hotplug_work; + struct delayed_work hotplug_work; struct megasas_instance *instance; }; diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c index d2c5366..e4f2baa 100644 --- a/drivers/scsi/megaraid/megaraid_sas_base.c +++ b/drivers/scsi/megaraid/megaraid_sas_base.c @@ -2060,9 +2060,9 @@ megasas_service_aen(struct megasas_instance *instance, struct megasas_cmd *cmd) } else { ev->instance = instance; instance->ev = ev; - INIT_WORK(&ev->hotplug_work, megasas_aen_polling); - schedule_delayed_work( - (struct delayed_work *)&ev->hotplug_work, 0); + INIT_DELAYED_WORK(&ev->hotplug_work, + megasas_aen_polling); + schedule_delayed_work(&ev->hotplug_work, 0); } } } @@ -4352,8 +4352,7 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state) /* cancel the delayed work if this work still in queue */ if (instance->ev != NULL) { struct megasas_aen_event *ev = instance->ev; - cancel_delayed_work_sync( - (struct delayed_work *)&ev->hotplug_work); + cancel_delayed_work_sync(&ev->hotplug_work); instance->ev = NULL; } @@ -4545,8 +4544,7 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev) /* cancel the delayed work if this work still in queue*/ if (instance->ev != NULL) { struct megasas_aen_event *ev = instance->ev; - cancel_delayed_work_sync( - (struct delayed_work *)&ev->hotplug_work); + cancel_delayed_work_sync(&ev->hotplug_work); instance->ev = NULL; } @@ -5190,7 +5188,7 @@ static void megasas_aen_polling(struct work_struct *work) { struct megasas_aen_event *ev = - container_of(work, struct megasas_aen_event, hotplug_work); + container_of(work, struct megasas_aen_event, hotplug_work.work); struct megasas_instance *instance = ev->instance; union megasas_evt_class_locale class_locale; struct Scsi_Host *host; -- cgit v0.10.2 From ac53c4fca42c394d8a06c7a470ae2d1d50503717 Mon Sep 17 00:00:00 2001 From: David Daney Date: Mon, 3 Dec 2012 12:44:26 -0800 Subject: MIPS: Avoid mcheck by flushing page range in huge_ptep_set_access_flags() Problem: 1) Huge page mapping of anonymous memory is initially invalid. Will be faulted in by copy-on-write mechanism. 2) Userspace attempts store at the end of the huge mapping. 3) TLB Refill exception handler fill TLB with a normal (4K sized) invalid page at the end of the huge mapping virtual address range. 4) Userspace restarted, and re-attempts the store at the end of the huge mapping. 5) Page from #3 is invalid, we get a fault and go to the hugepage fault handler. This tries to map a huge page and calls huge_ptep_set_access_flags() to install the mapping. 6) We just call the generic ptep_set_access_flags() to set up the page tables, but the flush there assumes a normal (4K sized) page and only tries to flush the first part of the huge page virtual address out of the TLB, since the existing entry from step #3 doesn't conflict, nothing is flushed. 7) We attempt to load the mapping into the TLB, but because it conflicts with the entry from step #3, we get a Machine Check exception. The fix: Flush the entire rage covered by the huge page in huge_ptep_set_access_flags(), and remove the optimization in local_flush_tlb_range() so that the flush actually does the correct thing. Signed-off-by: David Daney Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: Hillf Danton Patchwork: https://patchwork.linux-mips.org/patch/4661/ Signed-off-by: Ralf Baechle (cherry picked from commit dd617f258cc39d36be26afee9912624a2d23112c) diff --git a/arch/mips/include/asm/hugetlb.h b/arch/mips/include/asm/hugetlb.h index bd94946..ef99db9 100644 --- a/arch/mips/include/asm/hugetlb.h +++ b/arch/mips/include/asm/hugetlb.h @@ -95,7 +95,17 @@ static inline int huge_ptep_set_access_flags(struct vm_area_struct *vma, pte_t *ptep, pte_t pte, int dirty) { - return ptep_set_access_flags(vma, addr, ptep, pte, dirty); + int changed = !pte_same(*ptep, pte); + + if (changed) { + set_pte_at(vma->vm_mm, addr, ptep, pte); + /* + * There could be some standard sized pages in there, + * get them all. + */ + flush_tlb_range(vma, addr, addr + HPAGE_SIZE); + } + return changed; } static inline pte_t huge_ptep_get(pte_t *ptep) diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c index 4b9b935..88e79ad 100644 --- a/arch/mips/mm/tlb-r4k.c +++ b/arch/mips/mm/tlb-r4k.c @@ -120,18 +120,11 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, if (cpu_context(cpu, mm) != 0) { unsigned long size, flags; - int huge = is_vm_hugetlb_page(vma); ENTER_CRITICAL(flags); - if (huge) { - start = round_down(start, HPAGE_SIZE); - end = round_up(end, HPAGE_SIZE); - size = (end - start) >> HPAGE_SHIFT; - } else { - start = round_down(start, PAGE_SIZE << 1); - end = round_up(end, PAGE_SIZE << 1); - size = (end - start) >> (PAGE_SHIFT + 1); - } + start = round_down(start, PAGE_SIZE << 1); + end = round_up(end, PAGE_SIZE << 1); + size = (end - start) >> (PAGE_SHIFT + 1); if (size <= current_cpu_data.tlbsize/2) { int oldpid = read_c0_entryhi(); int newpid = cpu_asid(cpu, mm); @@ -140,10 +133,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start, int idx; write_c0_entryhi(start | newpid); - if (huge) - start += HPAGE_SIZE; - else - start += (PAGE_SIZE << 1); + start += (PAGE_SIZE << 1); mtc0_tlbw_hazard(); tlb_probe(); tlb_probe_hazard(); -- cgit v0.10.2 From fc4b514f2727f74a4587c31db87e0e93465518c3 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Tue, 4 Dec 2012 07:40:39 -0800 Subject: workqueue: convert BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s 8852aac25e ("workqueue: mod_delayed_work_on() shouldn't queue timer on 0 delay") unexpectedly uncovered a very nasty abuse of delayed_work in megaraid - it allocated work_struct, casted it to delayed_work and then pass that into queue_delayed_work(). Previously, this was okay because 0 @delay short-circuited to queue_work() before doing anything with delayed_work. 8852aac25e moved 0 @delay test into __queue_delayed_work() after sanity check on delayed_work making megaraid trigger BUG_ON(). Although megaraid is already fixed by c1d390d8e6 ("megaraid: fix BUG_ON() from incorrect use of delayed work"), this patch converts BUG_ON()s in __queue_delayed_work() to WARN_ON_ONCE()s so that such abusers, if there are more, trigger warning but don't crash the machine. Signed-off-by: Tejun Heo Cc: Xiaotian Feng diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 084aa47..1dae900 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -1361,8 +1361,8 @@ static void __queue_delayed_work(int cpu, struct workqueue_struct *wq, WARN_ON_ONCE(timer->function != delayed_work_timer_fn || timer->data != (unsigned long)dwork); - BUG_ON(timer_pending(timer)); - BUG_ON(!list_empty(&work->entry)); + WARN_ON_ONCE(timer_pending(timer)); + WARN_ON_ONCE(!list_empty(&work->entry)); /* * If @delay is 0, queue @dwork->work immediately. This is for -- cgit v0.10.2 From 57302e0ddf8a210a66fd8a1a2fa50844863b5ded Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 4 Dec 2012 08:25:11 -0800 Subject: vfs: avoid "attempt to access beyond end of device" warnings The block device access simplification that avoided accessing the (racy) block size information (commit bbec0270bdd8: "blkdev_max_block: make private to fs/buffer.c") no longer checks the maximum block size in the block mapping path. That was _almost_ as simple as just removing the code entirely, because the readers and writers all check the size of the device anyway, so under normal circumstances it "just worked". However, the block size may be such that the end of the device may straddle one single buffer_head. At which point we may still want to access the end of the device, but the buffer we use to access it partially extends past the end. The 'bd_set_size()' function intentionally sets the block size to avoid this, but mounting the device - or setting the block size by hand to some other value - can modify that block size. So instead, teach 'submit_bh()' about the special case of the buffer head straddling the end of the device, and turning such an access into a smaller IO access, avoiding the problem. This, btw, also means that unlike before, we can now access the whole device regardless of device block size setting. So now, even if the device size is only 512-byte aligned, we can read and write even the last sector even when having a much bigger block size for accessing the rest of the device. So with this, we could now get rid of the 'bd_set_size()' block size code entirely - resulting in faster IO for the common case - but that would be a separate patch. Reported-and-tested-by: Romain Francoise Reporeted-and-tested-by: Meelis Roos Reported-by: Tony Luck Signed-off-by: Linus Torvalds diff --git a/fs/buffer.c b/fs/buffer.c index 3586fb0..c4e1139 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2893,6 +2893,55 @@ static void end_bio_bh_io_sync(struct bio *bio, int err) bio_put(bio); } +/* + * This allows us to do IO even on the odd last sectors + * of a device, even if the bh block size is some multiple + * of the physical sector size. + * + * We'll just truncate the bio to the size of the device, + * and clear the end of the buffer head manually. + * + * Truly out-of-range accesses will turn into actual IO + * errors, this only handles the "we need to be able to + * do IO at the final sector" case. + */ +static void guard_bh_eod(int rw, struct bio *bio, struct buffer_head *bh) +{ + sector_t maxsector; + unsigned bytes; + + maxsector = i_size_read(bio->bi_bdev->bd_inode) >> 9; + if (!maxsector) + return; + + /* + * If the *whole* IO is past the end of the device, + * let it through, and the IO layer will turn it into + * an EIO. + */ + if (unlikely(bio->bi_sector >= maxsector)) + return; + + maxsector -= bio->bi_sector; + bytes = bio->bi_size; + if (likely((bytes >> 9) <= maxsector)) + return; + + /* Uhhuh. We've got a bh that straddles the device size! */ + bytes = maxsector << 9; + + /* Truncate the bio.. */ + bio->bi_size = bytes; + bio->bi_io_vec[0].bv_len = bytes; + + /* ..and clear the end of the buffer for reads */ + if (rw & READ) { + void *kaddr = kmap_atomic(bh->b_page); + memset(kaddr + bh_offset(bh) + bytes, 0, bh->b_size - bytes); + kunmap_atomic(kaddr); + } +} + int submit_bh(int rw, struct buffer_head * bh) { struct bio *bio; @@ -2929,6 +2978,9 @@ int submit_bh(int rw, struct buffer_head * bh) bio->bi_end_io = end_bio_bh_io_sync; bio->bi_private = bh; + /* Take care of bh's that straddle the end of the device */ + guard_bh_eod(rw, bio, bh); + bio_get(bio); submit_bio(rw, bio); -- cgit v0.10.2 From d5563715a30706b54ad9ec978b30b81d3fb320f3 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 4 Dec 2012 17:40:44 +0100 Subject: MIPS: N32: Fix preadv(2) and pwritev(2) entry points. By using the native syscall entry point the kernel was also expecting 64-bit iovec structures. This is broken since ddd9e91b71072b8ebe89311c3a44b077defa1756 [preadv/ pwritev: MIPS: Add preadv(2) and pwritev(2) syscalls.] which originally added these two syscalls. I walked through piles of code, including libc and couldn't find anything that would have worked around the issue so this change the API to what it should always have been. Noticed and patch suggested by Al Viro. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index f6ba838..ad8b657 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -403,8 +403,8 @@ EXPORT(sysn32_call_table) PTR sys_dup3 /* 6290 */ PTR sys_pipe2 PTR sys_inotify_init1 - PTR sys_preadv - PTR sys_pwritev + PTR compat_sys_preadv + PTR compat_sys_pwritev PTR compat_sys_rt_tgsigqueueinfo /* 6295 */ PTR sys_perf_event_open PTR sys_accept4 -- cgit v0.10.2 From 8d4516904b39507458bee8115793528e12b1d8dd Mon Sep 17 00:00:00 2001 From: Thomas Gleixner Date: Tue, 4 Dec 2012 18:59:34 +0100 Subject: watchdog: Fix CPU hotplug regression Norbert reported: "3.7-rc6 booted with nmi_watchdog=0 fails to suspend to RAM or offline CPUs. It's reproducable with a KVM guest and physical system." The reason is that commit bcd951cf(watchdog: Use hotplug thread infrastructure) missed to take this into account. So the cpu offline code gets stuck in the teardown function because it accesses non initialized data structures. Add a check for watchdog_enabled into that path to cure the issue. Reported-and-tested-by: Norbert Warmuth Tested-by: Joseph Salisbury Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1211231033230.2701@ionos Link: http://bugs.launchpad.net/bugs/1079534 Signed-off-by: Thomas Gleixner diff --git a/kernel/watchdog.c b/kernel/watchdog.c index dd4b80a..c8c21be 100644 --- a/kernel/watchdog.c +++ b/kernel/watchdog.c @@ -368,6 +368,9 @@ static void watchdog_disable(unsigned int cpu) { struct hrtimer *hrtimer = &__raw_get_cpu_var(watchdog_hrtimer); + if (!watchdog_enabled) + return; + watchdog_set_prio(SCHED_NORMAL, 0); hrtimer_cancel(hrtimer); /* disable the perf event */ -- cgit v0.10.2 From 12e130b04580532aa099893158aa2776b321ae7f Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 22 Oct 2012 15:05:48 +0100 Subject: MODSIGN: Don't use enum-type bitfields in module signature info block Don't use enum-type bitfields in the module signature info block as we can't be certain how the compiler will handle them. As I understand it, it is arch dependent, and it is possible for the compiler to rearrange them based on endianness and to insert a byte of padding to pad the three enums out to four bytes. Instead use u8 fields for these, which the compiler should emit in the right order without padding. Signed-off-by: David Howells Signed-off-by: Rusty Russell diff --git a/kernel/module_signing.c b/kernel/module_signing.c index ea1b1df..f2970bd 100644 --- a/kernel/module_signing.c +++ b/kernel/module_signing.c @@ -27,13 +27,13 @@ * - Information block */ struct module_signature { - enum pkey_algo algo : 8; /* Public-key crypto algorithm */ - enum pkey_hash_algo hash : 8; /* Digest algorithm */ - enum pkey_id_type id_type : 8; /* Key identifier type */ - u8 signer_len; /* Length of signer's name */ - u8 key_id_len; /* Length of key identifier */ - u8 __pad[3]; - __be32 sig_len; /* Length of signature data */ + u8 algo; /* Public-key crypto algorithm [enum pkey_algo] */ + u8 hash; /* Digest algorithm [enum pkey_hash_algo] */ + u8 id_type; /* Key identifier type [enum pkey_id_type] */ + u8 signer_len; /* Length of signer's name */ + u8 key_id_len; /* Length of key identifier */ + u8 __pad[3]; + __be32 sig_len; /* Length of signature data */ }; /* -- cgit v0.10.2 From f3537f91f9be2ce5fcbaa1aa6d787ad0436daec6 Mon Sep 17 00:00:00 2001 From: David Howells Date: Mon, 22 Oct 2012 15:05:55 +0100 Subject: ASN.1: Fix an indefinite length skip error Fix an error in asn1_find_indefinite_length() whereby small definite length elements of size 0x7f are incorrecly classified as non-small. Without this fix, an error will be given as the length of the length will be perceived as being very much greater than the maximum supported size. Signed-off-by: David Howells Signed-off-by: Rusty Russell diff --git a/lib/asn1_decoder.c b/lib/asn1_decoder.c index de2c8b5..5293d24 100644 --- a/lib/asn1_decoder.c +++ b/lib/asn1_decoder.c @@ -91,7 +91,7 @@ next_tag: /* Extract the length */ len = data[dp++]; - if (len < 0x7f) { + if (len <= 0x7f) { dp += len; goto next_tag; } -- cgit v0.10.2 From 27d7c2a006a81c04fab00b8cd81b99af3b32738d Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 5 Dec 2012 20:01:24 +0300 Subject: vfs: clear to the end of the buffer on partial buffer reads READ is zero so the "rw & READ" test is always false. The intended test was "((rw & RW_MASK) == READ)". Signed-off-by: Dan Carpenter Signed-off-by: Linus Torvalds diff --git a/fs/buffer.c b/fs/buffer.c index c4e1139..ec0aca8 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -2935,7 +2935,7 @@ static void guard_bh_eod(int rw, struct bio *bio, struct buffer_head *bh) bio->bi_io_vec[0].bv_len = bytes; /* ..and clear the end of the buffer for reads */ - if (rw & READ) { + if ((rw & RW_MASK) == READ) { void *kaddr = kmap_atomic(bh->b_page); memset(kaddr + bh_offset(bh) + bytes, 0, bh->b_size - bytes); kunmap_atomic(kaddr); -- cgit v0.10.2 From 97daa768010296d393196cbcd77549ce436a4a54 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Tue, 4 Dec 2012 18:50:48 +0100 Subject: MIPS: N32: Fix signalfd4 syscall entry point This needs to use the compat entry point or it's going to fail on big endian systems. Noticed by Al Viro. Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index ad8b657..86ec03f 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -397,7 +397,7 @@ EXPORT(sysn32_call_table) PTR sys_timerfd_create PTR compat_sys_timerfd_gettime /* 6285 */ PTR compat_sys_timerfd_settime - PTR sys_signalfd4 + PTR compat_sys_signalfd4 PTR sys_eventfd2 PTR sys_epoll_create1 PTR sys_dup3 /* 6290 */ -- cgit v0.10.2 From 2d33976fb395a5b9cb00f2c24132b3f272eb9a9d Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Fri, 8 Jun 2012 07:10:27 +0100 Subject: MIPS: R3000/R3081: Fix CPU detection. Broken since e05ea74fc56f347f872ef9946d27c53e8bf20864 (lmo) rsp. cea7e2dfdef53fe55f359d00da562a268be06fd2 (kernel.org) [MIPS: Sort out CPU type to name translation.] These CPUs are no longer very popular to say the least ... Signed-off-by: Ralf Baechle Reported-by: Murphy McCauley diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c index b1fb7af..cce3782 100644 --- a/arch/mips/kernel/cpu-probe.c +++ b/arch/mips/kernel/cpu-probe.c @@ -510,7 +510,6 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu) c->cputype = CPU_R3000A; __cpu_name[cpu] = "R3000A"; } - break; } else { c->cputype = CPU_R3000; __cpu_name[cpu] = "R3000"; -- cgit v0.10.2 From c90e6fbb220d44988cb65af3707367c57cdb65a8 Mon Sep 17 00:00:00 2001 From: Dmitry Adamushko Date: Thu, 5 Apr 2012 20:37:34 +0200 Subject: MIPS: Fix endless loop when processing signals for kernel tasks The problem occurs [1] when a kernel-mode task returns from a system call with a pending signal. A real-life scenario is a child of 'khelper' returning from a failed kernel_execve() in ____call_usermodehelper() [ kernel/kmod.c ]. kernel_execve() fails due to a pending SIGKILL, which is the result of "kill -9 -1" (at least, busybox's init does it upon reboot). The loop is as follows: * syscall_exit_work: - work_pending: // start_of_the_loop - work_notifysig: - do_notify_resume() - do_signal() - if (!user_mode(regs)) return; - resume_userspace // TIF_SIGPENDING is still set - work_pending // so we call work_pending => goto // start_of_the_loop More information can be found in another LKML thread: http://www.serverphorums.com/read.php?12,457826 [1] The problem was also reproduced on !CONFIG_VM86 x86, and the following fix was accepted. http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commit;h=29a2e2836ff9ea65a603c89df217f4198973a74f Signed-off-by: Dmitry Adamushko Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/3571/ Signed-off-by: Ralf Baechle diff --git a/arch/mips/kernel/entry.S b/arch/mips/kernel/entry.S index a6c1332..9b00362 100644 --- a/arch/mips/kernel/entry.S +++ b/arch/mips/kernel/entry.S @@ -36,6 +36,11 @@ FEXPORT(ret_from_exception) FEXPORT(ret_from_irq) LONG_S s0, TI_REGS($28) FEXPORT(__ret_from_irq) +/* + * We can be coming here from a syscall done in the kernel space, + * e.g. a failed kernel_execve(). + */ +resume_userspace_check: LONG_L t0, PT_STATUS(sp) # returning to kernel mode? andi t0, t0, KU_USER beqz t0, resume_kernel @@ -162,7 +167,7 @@ work_notifysig: # deal with pending signals and move a0, sp li a1, 0 jal do_notify_resume # a2 already loaded - j resume_userspace + j resume_userspace_check FEXPORT(syscall_exit_partial) local_irq_disable # make sure need_resched doesn't -- cgit v0.10.2 From 527897ccd968c86ad3265d62962c8beccdb94e47 Mon Sep 17 00:00:00 2001 From: Tim Gardner Date: Tue, 4 Dec 2012 12:52:28 -0700 Subject: lib/Makefile: Fix oid_registry build dependency It is $(obj)/oid_registry.o that is dependent on $(obj)/oid_registry_data.c. The object file cannot be built until $(obj)/oid_registry_data.c has been generated. A periodic and hard to reproduce parallel build failure is due to this incorrect lib/Makefile dependency. The compile error is completely disingenuous. GEN lib/oid_registry_data.c Compiling 49 OIDs CC lib/oid_registry.o gcc: error: lib/oid_registry.c: No such file or directory gcc: fatal error: no input files compilation terminated. make[3]: *** [lib/oid_registry.o] Error 4 Cc: Andrew Morton Cc: Akinobu Mita Cc: Michel Lespinasse Cc: David Howells Cc: "David S. Miller" Signed-off-by: Tim Gardner Signed-off-by: Rusty Russell diff --git a/lib/Makefile b/lib/Makefile index 821a162..a08b791 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -163,7 +163,7 @@ $(obj)/crc32table.h: $(obj)/gen_crc32table # obj-$(CONFIG_OID_REGISTRY) += oid_registry.o -$(obj)/oid_registry.c: $(obj)/oid_registry_data.c +$(obj)/oid_registry.o: $(obj)/oid_registry_data.c $(obj)/oid_registry_data.c: $(srctree)/include/linux/oid_registry.h \ $(src)/build_OID_registry -- cgit v0.10.2 From fe007c02f9659f5c0ae6f3ceaf45076df92cc88e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Sun, 18 Nov 2012 19:50:05 +0100 Subject: mmc: sdhci-s3c: fix missing clock for gpio card-detect 2abeb5c5ded2 ("Add clk_(enable/disable) in runtime suspend/resume") added the capability to stop the clocks when the device is runtime suspended, but forgot to handle the case of the card-detect using an external gpio. Therefore in the case that runtime-pm is enabled, start the io-clock when a card is inserted and stop it again once it is removed. Signed-off-by: Heiko Stuebner Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sdhci-s3c.c b/drivers/mmc/host/sdhci-s3c.c index a54dd5d..c9ec725 100644 --- a/drivers/mmc/host/sdhci-s3c.c +++ b/drivers/mmc/host/sdhci-s3c.c @@ -373,18 +373,25 @@ static struct sdhci_ops sdhci_s3c_ops = { static void sdhci_s3c_notify_change(struct platform_device *dev, int state) { struct sdhci_host *host = platform_get_drvdata(dev); + struct sdhci_s3c *sc = sdhci_priv(host); unsigned long flags; if (host) { spin_lock_irqsave(&host->lock, flags); if (state) { dev_dbg(&dev->dev, "card inserted.\n"); +#ifdef CONFIG_PM_RUNTIME + clk_prepare_enable(sc->clk_io); +#endif host->flags &= ~SDHCI_DEVICE_DEAD; host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; } else { dev_dbg(&dev->dev, "card removed.\n"); host->flags |= SDHCI_DEVICE_DEAD; host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; +#ifdef CONFIG_PM_RUNTIME + clk_disable_unprepare(sc->clk_io); +#endif } tasklet_schedule(&host->card_tasklet); spin_unlock_irqrestore(&host->lock, flags); -- cgit v0.10.2 From 6984f3c31bb57cb7491dbec1be44b74bd00f4648 Mon Sep 17 00:00:00 2001 From: Chris Ball Date: Mon, 3 Dec 2012 09:17:19 -0500 Subject: Revert misapplied "mmc: sh-mmcif: avoid oops on spurious interrupts" This reverts commit 8464dd52d3198dd05, which was a misapplied debugging version of the patch, not the final patch itself. Signed-off-by: Chris Ball Cc: stable@vger.kernel.org diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index d25bc97..43cd0b5 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1231,10 +1231,6 @@ static irqreturn_t sh_mmcif_intr(int irq, void *dev_id) host->sd_error = true; dev_dbg(&host->pd->dev, "int err state = %08x\n", state); } - if (host->state == STATE_IDLE) { - dev_info(&host->pd->dev, "Spurious IRQ status 0x%x", state); - return IRQ_HANDLED; - } if (state & ~(INT_CMD12RBE | INT_CMD12CRE)) { if (!host->dma_active) return IRQ_WAKE_THREAD; -- cgit v0.10.2 From 91ab252ac5a5c3461dd6910797611e9172626aed Mon Sep 17 00:00:00 2001 From: Guennadi Liakhovetski Date: Wed, 22 Aug 2012 06:49:47 +0000 Subject: mmc: sh-mmcif: avoid oops on spurious interrupts (second try) On some systems, e.g., kzm9g, MMCIF interfaces can produce spurious interrupts without any active request. To prevent the Oops, that results in such cases, don't dereference the mmc request pointer until we make sure, that we are indeed processing such a request. Reported-by: Tetsuyuki Kobayashi Signed-off-by: Guennadi Liakhovetski Tested-by: Tetsuyuki Kobayashi Cc: stable@vger.kernel.org Signed-off-by: Chris Ball diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index 43cd0b5..7eaee3e 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -1104,7 +1104,6 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id) { struct sh_mmcif_host *host = dev_id; struct mmc_request *mrq = host->mrq; - struct mmc_data *data = mrq->data; cancel_delayed_work_sync(&host->timeout_work); @@ -1152,13 +1151,14 @@ static irqreturn_t sh_mmcif_irqt(int irq, void *dev_id) case MMCIF_WAIT_FOR_READ_END: case MMCIF_WAIT_FOR_WRITE_END: if (host->sd_error) - data->error = sh_mmcif_error_manage(host); + mrq->data->error = sh_mmcif_error_manage(host); break; default: BUG(); } if (host->wait_for != MMCIF_WAIT_FOR_STOP) { + struct mmc_data *data = mrq->data; if (!mrq->cmd->error && data && !data->error) data->bytes_xfered = data->blocks * data->blksz; -- cgit v0.10.2 From 60177d31d215bc2b4c5a7aa6f742800e04fa0a92 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Thu, 6 Dec 2012 19:01:14 +0000 Subject: mm: compaction: validate pfn range passed to isolate_freepages_block Commit 0bf380bc70ec ("mm: compaction: check pfn_valid when entering a new MAX_ORDER_NR_PAGES block during isolation for migration") added a check for pfn_valid() when isolating pages for migration as the scanner does not necessarily start pageblock-aligned. Since commit c89511ab2f8f ("mm: compaction: Restart compaction from near where it left off"), the free scanner has the same problem. This patch makes sure that the pfn range passed to isolate_freepages_block() is within the same block so that pfn_valid() checks are unnecessary. In answer to Henrik's wondering why others have not reported this: reproducing this requires a large enough hole with the right aligment to have compaction walk into a PFN range with no memmap. Size and alignment depends in the memory model - 4M for FLATMEM and 128M for SPARSEMEM on x86. It needs a "lucky" machine. Reported-by: Henrik Rydberg Signed-off-by: Mel Gorman Signed-off-by: Linus Torvalds diff --git a/mm/compaction.c b/mm/compaction.c index 9eef558..694eaab 100644 --- a/mm/compaction.c +++ b/mm/compaction.c @@ -713,7 +713,15 @@ static void isolate_freepages(struct zone *zone, /* Found a block suitable for isolating free pages from */ isolated = 0; - end_pfn = min(pfn + pageblock_nr_pages, zone_end_pfn); + + /* + * As pfn may not start aligned, pfn+pageblock_nr_page + * may cross a MAX_ORDER_NR_PAGES boundary and miss + * a pfn_valid check. Ensure isolate_freepages_block() + * only scans within a pageblock + */ + end_pfn = ALIGN(pfn + 1, pageblock_nr_pages); + end_pfn = min(end_pfn, zone_end_pfn); isolated = isolate_freepages_block(cc, pfn, end_pfn, freelist, false); nr_freepages += isolated; -- cgit v0.10.2 From c702418f8a2fa6cc92e84a39880d458faf7af9cc Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Tue, 4 Dec 2012 11:11:31 -0500 Subject: mm: vmscan: do not keep kswapd looping forever due to individual uncompactable zones When a zone meets its high watermark and is compactable in case of higher order allocations, it contributes to the percentage of the node's memory that is considered balanced. This requirement, that a node be only partially balanced, came about when kswapd was desparately trying to balance tiny zones when all bigger zones in the node had plenty of free memory. Arguably, the same should apply to compaction: if a significant part of the node is balanced enough to run compaction, do not get hung up on that tiny zone that might never get in shape. When the compaction logic in kswapd is reached, we know that at least 25% of the node's memory is balanced properly for compaction (see zone_balanced and pgdat_balanced). Remove the individual zone checks that restart the kswapd cycle. Otherwise, we may observe more endless looping in kswapd where the compaction code loops back to reclaim because of a single zone and reclaim does nothing because the node is considered balanced overall. See for example https://bugzilla.redhat.com/show_bug.cgi?id=866988 Signed-off-by: Johannes Weiner Reported-and-tested-by: Thorsten Leemhuis Reported-by: Jiri Slaby Tested-by: John Ellson Tested-by: Zdenek Kabelac Tested-by: Bruno Wolff III Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 83f4d0e..124bbfe 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2823,22 +2823,6 @@ out: if (!populated_zone(zone)) continue; - if (zone->all_unreclaimable && - sc.priority != DEF_PRIORITY) - continue; - - /* Would compaction fail due to lack of free memory? */ - if (COMPACTION_BUILD && - compaction_suitable(zone, order) == COMPACT_SKIPPED) - goto loop_again; - - /* Confirm the zone is balanced for order-0 */ - if (!zone_watermark_ok(zone, 0, - high_wmark_pages(zone), 0, 0)) { - order = sc.order = 0; - goto loop_again; - } - /* Check if the memory needs to be defragmented. */ if (zone_watermark_ok(zone, order, low_wmark_pages(zone), *classzone_idx, 0)) -- cgit v0.10.2 From 18a2f371f5edf41810f6469cb9be39931ef9deb9 Mon Sep 17 00:00:00 2001 From: Mel Gorman Date: Wed, 5 Dec 2012 14:01:41 -0800 Subject: tmpfs: fix shared mempolicy leak This fixes a regression in 3.7-rc, which has since gone into stable. Commit 00442ad04a5e ("mempolicy: fix a memory corruption by refcount imbalance in alloc_pages_vma()") changed get_vma_policy() to raise the refcount on a shmem shared mempolicy; whereas shmem_alloc_page() went on expecting alloc_page_vma() to drop the refcount it had acquired. This deserves a rework: but for now fix the leak in shmem_alloc_page(). Hugh: shmem_swapin() did not need a fix, but surely it's clearer to use the same refcounting there as in shmem_alloc_page(), delete its onstack mempolicy, and the strange mpol_cond_copy() and __mpol_cond_copy() - those were invented to let swapin_readahead() make an unknown number of calls to alloc_pages_vma() with one mempolicy; but since 00442ad04a5e, alloc_pages_vma() has kept refcount in balance, so now no problem. Reported-and-tested-by: Tommi Rantala Signed-off-by: Mel Gorman Signed-off-by: Hugh Dickins Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds diff --git a/include/linux/mempolicy.h b/include/linux/mempolicy.h index e5ccb9d..dbd2127 100644 --- a/include/linux/mempolicy.h +++ b/include/linux/mempolicy.h @@ -82,16 +82,6 @@ static inline void mpol_cond_put(struct mempolicy *pol) __mpol_put(pol); } -extern struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol, - struct mempolicy *frompol); -static inline struct mempolicy *mpol_cond_copy(struct mempolicy *tompol, - struct mempolicy *frompol) -{ - if (!frompol) - return frompol; - return __mpol_cond_copy(tompol, frompol); -} - extern struct mempolicy *__mpol_dup(struct mempolicy *pol); static inline struct mempolicy *mpol_dup(struct mempolicy *pol) { @@ -215,12 +205,6 @@ static inline void mpol_cond_put(struct mempolicy *pol) { } -static inline struct mempolicy *mpol_cond_copy(struct mempolicy *to, - struct mempolicy *from) -{ - return from; -} - static inline void mpol_get(struct mempolicy *pol) { } diff --git a/mm/mempolicy.c b/mm/mempolicy.c index d04a8a5..4ea600d 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -2037,28 +2037,6 @@ struct mempolicy *__mpol_dup(struct mempolicy *old) return new; } -/* - * If *frompol needs [has] an extra ref, copy *frompol to *tompol , - * eliminate the * MPOL_F_* flags that require conditional ref and - * [NOTE!!!] drop the extra ref. Not safe to reference *frompol directly - * after return. Use the returned value. - * - * Allows use of a mempolicy for, e.g., multiple allocations with a single - * policy lookup, even if the policy needs/has extra ref on lookup. - * shmem_readahead needs this. - */ -struct mempolicy *__mpol_cond_copy(struct mempolicy *tompol, - struct mempolicy *frompol) -{ - if (!mpol_needs_cond_ref(frompol)) - return frompol; - - *tompol = *frompol; - tompol->flags &= ~MPOL_F_SHARED; /* copy doesn't need unref */ - __mpol_put(frompol); - return tompol; -} - /* Slow path of a mempolicy comparison */ bool __mpol_equal(struct mempolicy *a, struct mempolicy *b) { diff --git a/mm/shmem.c b/mm/shmem.c index 89341b6..50c5b8f 100644 --- a/mm/shmem.c +++ b/mm/shmem.c @@ -910,25 +910,29 @@ static struct mempolicy *shmem_get_sbmpol(struct shmem_sb_info *sbinfo) static struct page *shmem_swapin(swp_entry_t swap, gfp_t gfp, struct shmem_inode_info *info, pgoff_t index) { - struct mempolicy mpol, *spol; struct vm_area_struct pvma; - - spol = mpol_cond_copy(&mpol, - mpol_shared_policy_lookup(&info->policy, index)); + struct page *page; /* Create a pseudo vma that just contains the policy */ pvma.vm_start = 0; /* Bias interleave by inode number to distribute better across nodes */ pvma.vm_pgoff = index + info->vfs_inode.i_ino; pvma.vm_ops = NULL; - pvma.vm_policy = spol; - return swapin_readahead(swap, gfp, &pvma, 0); + pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, index); + + page = swapin_readahead(swap, gfp, &pvma, 0); + + /* Drop reference taken by mpol_shared_policy_lookup() */ + mpol_cond_put(pvma.vm_policy); + + return page; } static struct page *shmem_alloc_page(gfp_t gfp, struct shmem_inode_info *info, pgoff_t index) { struct vm_area_struct pvma; + struct page *page; /* Create a pseudo vma that just contains the policy */ pvma.vm_start = 0; @@ -937,10 +941,12 @@ static struct page *shmem_alloc_page(gfp_t gfp, pvma.vm_ops = NULL; pvma.vm_policy = mpol_shared_policy_lookup(&info->policy, index); - /* - * alloc_page_vma() will drop the shared policy reference - */ - return alloc_page_vma(gfp, &pvma, 0); + page = alloc_page_vma(gfp, &pvma, 0); + + /* Drop reference taken by mpol_shared_policy_lookup() */ + mpol_cond_put(pvma.vm_policy); + + return page; } #else /* !CONFIG_NUMA */ #ifdef CONFIG_TMPFS -- cgit v0.10.2 From 93b174ad71b08e504c2cf6e8a58ecce778b77a40 Mon Sep 17 00:00:00 2001 From: Yuchung Cheng Date: Thu, 6 Dec 2012 08:45:32 +0000 Subject: tcp: bug fix Fast Open client retransmission If SYN-ACK partially acks SYN-data, the client retransmits the remaining data by tcp_retransmit_skb(). This increments lost recovery state variables like tp->retrans_out in Open state. If loss recovery happens before the retransmission is acked, it triggers the WARN_ON check in tcp_fastretrans_alert(). For example: the client sends SYN-data, gets SYN-ACK acking only ISN, retransmits data, sends another 4 data packets and get 3 dupacks. Since the retransmission is not caused by network drop it should not update the recovery state variables. Further the server may return a smaller MSS than the cached MSS used for SYN-data, so the retranmission needs a loop. Otherwise some data will not be retransmitted until timeout or other loss recovery events. Signed-off-by: Yuchung Cheng Acked-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/include/net/tcp.h b/include/net/tcp.h index 6feeccd..4af45e3 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -525,6 +525,7 @@ static inline __u32 cookie_v6_init_sequence(struct sock *sk, extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss, int nonagle); extern bool tcp_may_send_now(struct sock *sk); +extern int __tcp_retransmit_skb(struct sock *, struct sk_buff *); extern int tcp_retransmit_skb(struct sock *, struct sk_buff *); extern void tcp_retransmit_timer(struct sock *sk); extern void tcp_xmit_retransmit_queue(struct sock *); diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index 609ff98..181fc82 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -5645,7 +5645,11 @@ static bool tcp_rcv_fastopen_synack(struct sock *sk, struct sk_buff *synack, tcp_fastopen_cache_set(sk, mss, cookie, syn_drop); if (data) { /* Retransmit unacked data in SYN */ - tcp_retransmit_skb(sk, data); + tcp_for_write_queue_from(data, sk) { + if (data == tcp_send_head(sk) || + __tcp_retransmit_skb(sk, data)) + break; + } tcp_rearm_rto(sk); return true; } diff --git a/net/ipv4/tcp_output.c b/net/ipv4/tcp_output.c index 2798706..948ac27 100644 --- a/net/ipv4/tcp_output.c +++ b/net/ipv4/tcp_output.c @@ -2309,12 +2309,11 @@ static void tcp_retrans_try_collapse(struct sock *sk, struct sk_buff *to, * state updates are done by the caller. Returns non-zero if an * error occurred which prevented the send. */ -int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) +int __tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) { struct tcp_sock *tp = tcp_sk(sk); struct inet_connection_sock *icsk = inet_csk(sk); unsigned int cur_mss; - int err; /* Inconslusive MTU probe */ if (icsk->icsk_mtup.probe_size) { @@ -2387,11 +2386,17 @@ int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) if (unlikely(NET_IP_ALIGN && ((unsigned long)skb->data & 3))) { struct sk_buff *nskb = __pskb_copy(skb, MAX_TCP_HEADER, GFP_ATOMIC); - err = nskb ? tcp_transmit_skb(sk, nskb, 0, GFP_ATOMIC) : - -ENOBUFS; + return nskb ? tcp_transmit_skb(sk, nskb, 0, GFP_ATOMIC) : + -ENOBUFS; } else { - err = tcp_transmit_skb(sk, skb, 1, GFP_ATOMIC); + return tcp_transmit_skb(sk, skb, 1, GFP_ATOMIC); } +} + +int tcp_retransmit_skb(struct sock *sk, struct sk_buff *skb) +{ + struct tcp_sock *tp = tcp_sk(sk); + int err = __tcp_retransmit_skb(sk, skb); if (err == 0) { /* Update global TCP statistics. */ -- cgit v0.10.2 From c3c7c254b2e8cd99b0adf288c2a1bddacd7ba255 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Thu, 6 Dec 2012 13:54:59 +0000 Subject: net: gro: fix possible panic in skb_gro_receive() commit 2e71a6f8084e (net: gro: selective flush of packets) added a bug for skbs using frag_list. This part of the GRO stack is rarely used, as it needs skb not using a page fragment for their skb->head. Most drivers do use a page fragment, but some of them use GFP_KERNEL allocations for the initial fill of their RX ring buffer. napi_gro_flush() overwrite skb->prev that was used for these skb to point to the last skb in frag_list. Fix this using a separate field in struct napi_gro_cb to point to the last fragment. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index f8eda02..a848ffc 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -1488,6 +1488,9 @@ struct napi_gro_cb { /* Used in ipv6_gro_receive() */ int proto; + + /* used in skb_gro_receive() slow path */ + struct sk_buff *last; }; #define NAPI_GRO_CB(skb) ((struct napi_gro_cb *)(skb)->cb) diff --git a/net/core/dev.c b/net/core/dev.c index c0946cb..e5942bf 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -3451,6 +3451,8 @@ static int napi_gro_complete(struct sk_buff *skb) struct list_head *head = &ptype_base[ntohs(type) & PTYPE_HASH_MASK]; int err = -ENOENT; + BUILD_BUG_ON(sizeof(struct napi_gro_cb) > sizeof(skb->cb)); + if (NAPI_GRO_CB(skb)->count == 1) { skb_shinfo(skb)->gso_size = 0; goto out; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 4007c14..3f0636c 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -3004,7 +3004,7 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb) skb_shinfo(nskb)->gso_size = pinfo->gso_size; pinfo->gso_size = 0; skb_header_release(p); - nskb->prev = p; + NAPI_GRO_CB(nskb)->last = p; nskb->data_len += p->len; nskb->truesize += p->truesize; @@ -3030,8 +3030,8 @@ merge: __skb_pull(skb, offset); - p->prev->next = skb; - p->prev = skb; + NAPI_GRO_CB(p)->last->next = skb; + NAPI_GRO_CB(p)->last = skb; skb_header_release(skb); done: -- cgit v0.10.2 From 684c9aaebbb0ea3a9954d605d4908e650659e7db Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Fri, 7 Dec 2012 16:48:39 -0800 Subject: vfs: fix O_DIRECT read past end of block device The direct-IO write path already had the i_size checks in mm/filemap.c, but it turns out the read path did not, and removing the block size checks in fs/block_dev.c (commit bbec0270bdd8: "blkdev_max_block: make private to fs/buffer.c") removed the magic "shrink IO to past the end of the device" code there. Fix it by truncating the IO to the size of the block device, like the write path already does. NOTE! I suspect the write path would be *much* better off doing it this way in fs/block_dev.c, rather than hidden deep in mm/filemap.c. The mm/filemap.c code is extremely hard to follow, and has various conditionals on the target being a block device (ie the flag passed in to 'generic_write_checks()', along with a conditional update of the inode timestamp etc). It is also quite possible that we should treat this whole block device size as a "s_maxbytes" issue, and try to make the logic even more generic. However, in the meantime this is the fairly minimal targeted fix. Noted by Milan Broz thanks to a regression test for the cryptsetup reencrypt tool. Reported-and-tested-by: Milan Broz Signed-off-by: Linus Torvalds diff --git a/fs/block_dev.c b/fs/block_dev.c index a1e09b4..ab3a456 100644 --- a/fs/block_dev.c +++ b/fs/block_dev.c @@ -1544,6 +1544,22 @@ ssize_t blkdev_aio_write(struct kiocb *iocb, const struct iovec *iov, } EXPORT_SYMBOL_GPL(blkdev_aio_write); +static ssize_t blkdev_aio_read(struct kiocb *iocb, const struct iovec *iov, + unsigned long nr_segs, loff_t pos) +{ + struct file *file = iocb->ki_filp; + struct inode *bd_inode = file->f_mapping->host; + loff_t size = i_size_read(bd_inode); + + if (pos >= size) + return 0; + + size -= pos; + if (size < INT_MAX) + nr_segs = iov_shorten((struct iovec *)iov, nr_segs, size); + return generic_file_aio_read(iocb, iov, nr_segs, pos); +} + /* * Try to release a page associated with block device when the system * is under memory pressure. @@ -1574,7 +1590,7 @@ const struct file_operations def_blk_fops = { .llseek = block_llseek, .read = do_sync_read, .write = do_sync_write, - .aio_read = generic_file_aio_read, + .aio_read = blkdev_aio_read, .aio_write = blkdev_aio_write, .mmap = generic_file_mmap, .fsync = blkdev_fsync, -- cgit v0.10.2 From ed23ec4f0a510528e0ffe415f9394107418ae854 Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Thu, 6 Dec 2012 15:23:25 -0500 Subject: mm: vmscan: fix inappropriate zone congestion clearing commit c702418f8a2f ("mm: vmscan: do not keep kswapd looping forever due to individual uncompactable zones") removed zone watermark checks from the compaction code in kswapd but left in the zone congestion clearing, which now happens unconditionally on higher order reclaim. This messes up the reclaim throttling logic for zones with dirty/writeback pages, where zones should only lose their congestion status when their watermarks have been restored. Remove the clearing from the zone compaction section entirely. The preliminary zone check and the reclaim loop in kswapd will clear it if the zone is considered balanced. Signed-off-by: Johannes Weiner Reviewed-by: Rik van Riel Signed-off-by: Linus Torvalds diff --git a/mm/vmscan.c b/mm/vmscan.c index 124bbfe..b7ed376 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -2827,9 +2827,6 @@ out: if (zone_watermark_ok(zone, order, low_wmark_pages(zone), *classzone_idx, 0)) zones_need_compaction = 0; - - /* If balanced, clear the congested flag */ - zone_clear_flag(zone, ZONE_CONGESTED); } if (zones_need_compaction) -- cgit v0.10.2 From d06080cf08e6b59971959d9be3d0587c6e033292 Mon Sep 17 00:00:00 2001 From: Sachin Kamat Date: Fri, 7 Dec 2012 16:32:26 +0530 Subject: ASoC: tpa6130a2: Use devm_* APIs Converted to use devm_gpio_request and devm_regulator_get APIs. These are device managed and make error handling and cleanup a bit simpler. Cc: Peter Ujfalusi Signed-off-by: Sachin Kamat Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/tpa6130a2.c b/sound/soc/codecs/tpa6130a2.c index 565ff39..ec78073 100644 --- a/sound/soc/codecs/tpa6130a2.c +++ b/sound/soc/codecs/tpa6130a2.c @@ -398,7 +398,8 @@ static int __devinit tpa6130a2_probe(struct i2c_client *client, TPA6130A2_MUTE_L; if (data->power_gpio >= 0) { - ret = gpio_request(data->power_gpio, "tpa6130a2 enable"); + ret = devm_gpio_request(dev, data->power_gpio, + "tpa6130a2 enable"); if (ret < 0) { dev_err(dev, "Failed to request power GPIO (%d)\n", data->power_gpio); @@ -419,16 +420,16 @@ static int __devinit tpa6130a2_probe(struct i2c_client *client, break; } - data->supply = regulator_get(dev, regulator); + data->supply = devm_regulator_get(dev, regulator); if (IS_ERR(data->supply)) { ret = PTR_ERR(data->supply); dev_err(dev, "Failed to request supply: %d\n", ret); - goto err_regulator; + goto err_gpio; } ret = tpa6130a2_power(1); if (ret != 0) - goto err_power; + goto err_gpio; /* Read version */ @@ -440,15 +441,10 @@ static int __devinit tpa6130a2_probe(struct i2c_client *client, /* Disable the chip */ ret = tpa6130a2_power(0); if (ret != 0) - goto err_power; + goto err_gpio; return 0; -err_power: - regulator_put(data->supply); -err_regulator: - if (data->power_gpio >= 0) - gpio_free(data->power_gpio); err_gpio: tpa6130a2_client = NULL; @@ -457,14 +453,7 @@ err_gpio: static int __devexit tpa6130a2_remove(struct i2c_client *client) { - struct tpa6130a2_data *data = i2c_get_clientdata(client); - tpa6130a2_power(0); - - if (data->power_gpio >= 0) - gpio_free(data->power_gpio); - - regulator_put(data->supply); tpa6130a2_client = NULL; return 0; -- cgit v0.10.2 From 1c95df85ca49640576de2f0a850925957b547b84 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sat, 8 Dec 2012 19:43:21 +0000 Subject: inet_diag: fix oops for IPv4 AF_INET6 TCP SYN-RECV state Fix inet_diag to be aware of the fact that AF_INET6 TCP connections instantiated for IPv4 traffic and in the SYN-RECV state were actually created with inet_reqsk_alloc(), instead of inet6_reqsk_alloc(). This means that for such connections inet6_rsk(req) returns a pointer to a random spot in memory up to roughly 64KB beyond the end of the request_sock. With this bug, for a server using AF_INET6 TCP sockets and serving IPv4 traffic, an inet_diag user like `ss state SYN-RECV` would lead to inet_diag_fill_req() causing an oops or the export to user space of 16 bytes of kernel memory as a garbage IPv6 address, depending on where the garbage inet6_rsk(req) pointed. Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 0c34bfa..16cfa42 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -44,6 +44,10 @@ struct inet_diag_entry { u16 dport; u16 family; u16 userlocks; +#if IS_ENABLED(CONFIG_IPV6) + struct in6_addr saddr_storage; /* for IPv4-mapped-IPv6 addresses */ + struct in6_addr daddr_storage; /* for IPv4-mapped-IPv6 addresses */ +#endif }; static DEFINE_MUTEX(inet_diag_table_mutex); @@ -596,6 +600,36 @@ static int inet_twsk_diag_dump(struct inet_timewait_sock *tw, cb->nlh->nlmsg_seq, NLM_F_MULTI, cb->nlh); } +/* Get the IPv4, IPv6, or IPv4-mapped-IPv6 local and remote addresses + * from a request_sock. For IPv4-mapped-IPv6 we must map IPv4 to IPv6. + */ +static inline void inet_diag_req_addrs(const struct sock *sk, + const struct request_sock *req, + struct inet_diag_entry *entry) +{ + struct inet_request_sock *ireq = inet_rsk(req); + +#if IS_ENABLED(CONFIG_IPV6) + if (sk->sk_family == AF_INET6) { + if (req->rsk_ops->family == AF_INET6) { + entry->saddr = inet6_rsk(req)->loc_addr.s6_addr32; + entry->daddr = inet6_rsk(req)->rmt_addr.s6_addr32; + } else if (req->rsk_ops->family == AF_INET) { + ipv6_addr_set_v4mapped(ireq->loc_addr, + &entry->saddr_storage); + ipv6_addr_set_v4mapped(ireq->rmt_addr, + &entry->daddr_storage); + entry->saddr = entry->saddr_storage.s6_addr32; + entry->daddr = entry->daddr_storage.s6_addr32; + } + } else +#endif + { + entry->saddr = &ireq->loc_addr; + entry->daddr = &ireq->rmt_addr; + } +} + static int inet_diag_fill_req(struct sk_buff *skb, struct sock *sk, struct request_sock *req, struct user_namespace *user_ns, @@ -637,8 +671,10 @@ static int inet_diag_fill_req(struct sk_buff *skb, struct sock *sk, r->idiag_inode = 0; #if IS_ENABLED(CONFIG_IPV6) if (r->idiag_family == AF_INET6) { - *(struct in6_addr *)r->id.idiag_src = inet6_rsk(req)->loc_addr; - *(struct in6_addr *)r->id.idiag_dst = inet6_rsk(req)->rmt_addr; + struct inet_diag_entry entry; + inet_diag_req_addrs(sk, req, &entry); + memcpy(r->id.idiag_src, entry.saddr, sizeof(struct in6_addr)); + memcpy(r->id.idiag_dst, entry.daddr, sizeof(struct in6_addr)); } #endif @@ -691,18 +727,7 @@ static int inet_diag_dump_reqs(struct sk_buff *skb, struct sock *sk, continue; if (bc) { - entry.saddr = -#if IS_ENABLED(CONFIG_IPV6) - (entry.family == AF_INET6) ? - inet6_rsk(req)->loc_addr.s6_addr32 : -#endif - &ireq->loc_addr; - entry.daddr = -#if IS_ENABLED(CONFIG_IPV6) - (entry.family == AF_INET6) ? - inet6_rsk(req)->rmt_addr.s6_addr32 : -#endif - &ireq->rmt_addr; + inet_diag_req_addrs(sk, req, &entry); entry.dport = ntohs(ireq->rmt_port); if (!inet_diag_bc_run(bc, &entry)) -- cgit v0.10.2 From 405c005949e47b6e91359159c24753519ded0c67 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sat, 8 Dec 2012 19:43:22 +0000 Subject: inet_diag: validate byte code to prevent oops in inet_diag_bc_run() Add logic to validate INET_DIAG_BC_S_COND and INET_DIAG_BC_D_COND operations. Previously we did not validate the inet_diag_hostcond, address family, address length, and prefix length. So a malicious user could make the kernel read beyond the end of the bytecode array by claiming to have a whole inet_diag_hostcond when the bytecode was not long enough to contain a whole inet_diag_hostcond of the given address family. Or they could make the kernel read up to about 27 bytes beyond the end of a connection address by passing a prefix length that exceeded the length of addresses of the given family. Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 16cfa42..529747d 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -513,6 +513,44 @@ static int valid_cc(const void *bc, int len, int cc) return 0; } +/* Validate an inet_diag_hostcond. */ +static bool valid_hostcond(const struct inet_diag_bc_op *op, int len, + int *min_len) +{ + int addr_len; + struct inet_diag_hostcond *cond; + + /* Check hostcond space. */ + *min_len += sizeof(struct inet_diag_hostcond); + if (len < *min_len) + return false; + cond = (struct inet_diag_hostcond *)(op + 1); + + /* Check address family and address length. */ + switch (cond->family) { + case AF_UNSPEC: + addr_len = 0; + break; + case AF_INET: + addr_len = sizeof(struct in_addr); + break; + case AF_INET6: + addr_len = sizeof(struct in6_addr); + break; + default: + return false; + } + *min_len += addr_len; + if (len < *min_len) + return false; + + /* Check prefix length (in bits) vs address length (in bytes). */ + if (cond->prefix_len > 8 * addr_len) + return false; + + return true; +} + static int inet_diag_bc_audit(const void *bytecode, int bytecode_len) { const void *bc = bytecode; @@ -520,18 +558,22 @@ static int inet_diag_bc_audit(const void *bytecode, int bytecode_len) while (len > 0) { const struct inet_diag_bc_op *op = bc; + int min_len = sizeof(struct inet_diag_bc_op); //printk("BC: %d %d %d {%d} / %d\n", op->code, op->yes, op->no, op[1].no, len); switch (op->code) { - case INET_DIAG_BC_AUTO: case INET_DIAG_BC_S_COND: case INET_DIAG_BC_D_COND: + if (!valid_hostcond(bc, len, &min_len)) + return -EINVAL; + /* fall through */ + case INET_DIAG_BC_AUTO: case INET_DIAG_BC_S_GE: case INET_DIAG_BC_S_LE: case INET_DIAG_BC_D_GE: case INET_DIAG_BC_D_LE: case INET_DIAG_BC_JMP: - if (op->no < 4 || op->no > len + 4 || op->no & 3) + if (op->no < min_len || op->no > len + 4 || op->no & 3) return -EINVAL; if (op->no < len && !valid_cc(bytecode, bytecode_len, len - op->no)) @@ -542,7 +584,7 @@ static int inet_diag_bc_audit(const void *bytecode, int bytecode_len) default: return -EINVAL; } - if (op->yes < 4 || op->yes > len + 4 || op->yes & 3) + if (op->yes < min_len || op->yes > len + 4 || op->yes & 3) return -EINVAL; bc += op->yes; len -= op->yes; -- cgit v0.10.2 From f67caec9068cee426ec23cf9005a1dee2ecad187 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sat, 8 Dec 2012 19:43:23 +0000 Subject: inet_diag: avoid unsafe and nonsensical prefix matches in inet_diag_bc_run() Add logic to check the address family of the user-supplied conditional and the address family of the connection entry. We now do not do prefix matching of addresses from different address families (AF_INET vs AF_INET6), except for the previously existing support for having an IPv4 prefix match an IPv4-mapped IPv6 address (which this commit maintains as-is). This change is needed for two reasons: (1) The addresses are different lengths, so comparing a 128-bit IPv6 prefix match condition to a 32-bit IPv4 connection address can cause us to unwittingly walk off the end of the IPv4 address and read garbage or oops. (2) The IPv4 and IPv6 address spaces are semantically distinct, so a simple bit-wise comparison of the prefixes is not meaningful, and would lead to bogus results (except for the IPv4-mapped IPv6 case, which this commit maintains). Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 529747d..95f1a45 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -432,25 +432,31 @@ static int inet_diag_bc_run(const struct nlattr *_bc, break; } - if (cond->prefix_len == 0) - break; - if (op->code == INET_DIAG_BC_S_COND) addr = entry->saddr; else addr = entry->daddr; + if (cond->family != AF_UNSPEC && + cond->family != entry->family) { + if (entry->family == AF_INET6 && + cond->family == AF_INET) { + if (addr[0] == 0 && addr[1] == 0 && + addr[2] == htonl(0xffff) && + bitstring_match(addr + 3, + cond->addr, + cond->prefix_len)) + break; + } + yes = 0; + break; + } + + if (cond->prefix_len == 0) + break; if (bitstring_match(addr, cond->addr, cond->prefix_len)) break; - if (entry->family == AF_INET6 && - cond->family == AF_INET) { - if (addr[0] == 0 && addr[1] == 0 && - addr[2] == htonl(0xffff) && - bitstring_match(addr + 3, cond->addr, - cond->prefix_len)) - break; - } yes = 0; break; } -- cgit v0.10.2 From 5e1f54201cb481f40a04bc47e1bc8c093a189e23 Mon Sep 17 00:00:00 2001 From: Neal Cardwell Date: Sun, 9 Dec 2012 11:09:54 +0000 Subject: inet_diag: validate port comparison byte code to prevent unsafe reads Add logic to verify that a port comparison byte code operation actually has the second inet_diag_bc_op from which we read the port for such operations. Previously the code blindly referenced op[1] without first checking whether a second inet_diag_bc_op struct could fit there. So a malicious user could make the kernel read 4 bytes beyond the end of the bytecode array by claiming to have a whole port comparison byte code (2 inet_diag_bc_op structs) when in fact the bytecode was not long enough to hold both. Signed-off-by: Neal Cardwell Signed-off-by: David S. Miller diff --git a/net/ipv4/inet_diag.c b/net/ipv4/inet_diag.c index 95f1a45..e23e16d 100644 --- a/net/ipv4/inet_diag.c +++ b/net/ipv4/inet_diag.c @@ -557,6 +557,17 @@ static bool valid_hostcond(const struct inet_diag_bc_op *op, int len, return true; } +/* Validate a port comparison operator. */ +static inline bool valid_port_comparison(const struct inet_diag_bc_op *op, + int len, int *min_len) +{ + /* Port comparisons put the port in a follow-on inet_diag_bc_op. */ + *min_len += sizeof(struct inet_diag_bc_op); + if (len < *min_len) + return false; + return true; +} + static int inet_diag_bc_audit(const void *bytecode, int bytecode_len) { const void *bc = bytecode; @@ -572,24 +583,30 @@ static int inet_diag_bc_audit(const void *bytecode, int bytecode_len) case INET_DIAG_BC_D_COND: if (!valid_hostcond(bc, len, &min_len)) return -EINVAL; - /* fall through */ - case INET_DIAG_BC_AUTO: + break; case INET_DIAG_BC_S_GE: case INET_DIAG_BC_S_LE: case INET_DIAG_BC_D_GE: case INET_DIAG_BC_D_LE: - case INET_DIAG_BC_JMP: - if (op->no < min_len || op->no > len + 4 || op->no & 3) - return -EINVAL; - if (op->no < len && - !valid_cc(bytecode, bytecode_len, len - op->no)) + if (!valid_port_comparison(bc, len, &min_len)) return -EINVAL; break; + case INET_DIAG_BC_AUTO: + case INET_DIAG_BC_JMP: case INET_DIAG_BC_NOP: break; default: return -EINVAL; } + + if (op->code != INET_DIAG_BC_NOP) { + if (op->no < min_len || op->no > len + 4 || op->no & 3) + return -EINVAL; + if (op->no < len && + !valid_cc(bytecode, bytecode_len, len - op->no)) + return -EINVAL; + } + if (op->yes < min_len || op->yes > len + 4 || op->yes & 3) return -EINVAL; bc += op->yes; -- cgit v0.10.2 From a3adb1432d7a3ad86bb17a1638e44414537e4118 Mon Sep 17 00:00:00 2001 From: Lars-Peter Clausen Date: Fri, 7 Dec 2012 18:30:51 +0100 Subject: ASoC: sigmadsp: Fix endianness conversion issue The 'addr' field of the sigma_action struct is stored as big endian in the firmware file. Signed-off-by: Lars-Peter Clausen Signed-off-by: Mark Brown Cc: stable@vger.kernel.org diff --git a/sound/soc/codecs/sigmadsp.c b/sound/soc/codecs/sigmadsp.c index 5be42bf..4068f24 100644 --- a/sound/soc/codecs/sigmadsp.c +++ b/sound/soc/codecs/sigmadsp.c @@ -225,7 +225,7 @@ EXPORT_SYMBOL(process_sigma_firmware); static int sigma_action_write_regmap(void *control_data, const struct sigma_action *sa, size_t len) { - return regmap_raw_write(control_data, le16_to_cpu(sa->addr), + return regmap_raw_write(control_data, be16_to_cpu(sa->addr), sa->payload, len - 2); } -- cgit v0.10.2 From a1ad500e369183796820bffb4012b876a8685219 Mon Sep 17 00:00:00 2001 From: Paul Handrigan Date: Fri, 7 Dec 2012 14:53:42 -0600 Subject: ASoC: cs42l73: Add DMIC's as DAPM inputs. Signed-off-by: Paul Handrigan Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c index 2c08c4c..4766795 100644 --- a/sound/soc/codecs/cs42l73.c +++ b/sound/soc/codecs/cs42l73.c @@ -589,6 +589,8 @@ static const struct snd_kcontrol_new cs42l73_snd_controls[] = { }; static const struct snd_soc_dapm_widget cs42l73_dapm_widgets[] = { + SND_SOC_DAPM_INPUT("DMICA"), + SND_SOC_DAPM_INPUT("DMICB"), SND_SOC_DAPM_INPUT("LINEINA"), SND_SOC_DAPM_INPUT("LINEINB"), SND_SOC_DAPM_INPUT("MIC1"), @@ -795,6 +797,8 @@ static const struct snd_soc_dapm_route cs42l73_audio_map[] = { {"ADC Left", NULL, "PGA Left"}, {"ADC Right", NULL, "PGA Right"}, + {"DMIC Left", NULL, "DMICA"}, + {"DMIC Right", NULL, "DMICB"}, {"Input Left Capture", "ADC Left Input", "ADC Left"}, {"Input Right Capture", "ADC Right Input", "ADC Right"}, -- cgit v0.10.2 From 41df0829cee9e4c4ba68de33b4ca26cb18ac8ed7 Mon Sep 17 00:00:00 2001 From: Paul Handrigan Date: Fri, 7 Dec 2012 14:53:43 -0600 Subject: ASoC: cs42l73: Add DAPM events for power down. Add power down delays between setting PDN and MCLKDIS for spk amp, spklo amp, and ear amp. Signed-off-by: Paul Handrigan Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c index 4766795..fb9b178 100644 --- a/sound/soc/codecs/cs42l73.c +++ b/sound/soc/codecs/cs42l73.c @@ -40,6 +40,7 @@ struct cs42l73_private { u32 sysclk; u8 mclksel; u32 mclk; + int shutdwn_delay; }; static const struct reg_default cs42l73_reg_defaults[] = { @@ -588,6 +589,57 @@ static const struct snd_kcontrol_new cs42l73_snd_controls[] = { SOC_ENUM("XSPOUT Mono/Stereo Select", xsp_output_mux_enum), }; +static int cs42l73_spklo_spk_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct cs42l73_private *priv = snd_soc_codec_get_drvdata(codec); + switch (event) { + case SND_SOC_DAPM_POST_PMD: + /* 150 ms delay between setting PDN and MCLKDIS */ + priv->shutdwn_delay = 150; + break; + default: + pr_err("Invalid event = 0x%x\n", event); + } + return 0; +} + +static int cs42l73_ear_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct cs42l73_private *priv = snd_soc_codec_get_drvdata(codec); + switch (event) { + case SND_SOC_DAPM_POST_PMD: + /* 50 ms delay between setting PDN and MCLKDIS */ + if (priv->shutdwn_delay < 50) + priv->shutdwn_delay = 50; + break; + default: + pr_err("Invalid event = 0x%x\n", event); + } + return 0; +} + + +static int cs42l73_hp_amp_event(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *kcontrol, int event) +{ + struct snd_soc_codec *codec = w->codec; + struct cs42l73_private *priv = snd_soc_codec_get_drvdata(codec); + switch (event) { + case SND_SOC_DAPM_POST_PMD: + /* 30 ms delay between setting PDN and MCLKDIS */ + if (priv->shutdwn_delay < 30) + priv->shutdwn_delay = 30; + break; + default: + pr_err("Invalid event = 0x%x\n", event); + } + return 0; +} + static const struct snd_soc_dapm_widget cs42l73_dapm_widgets[] = { SND_SOC_DAPM_INPUT("DMICA"), SND_SOC_DAPM_INPUT("DMICB"), @@ -676,16 +728,20 @@ static const struct snd_soc_dapm_widget cs42l73_dapm_widgets[] = { SND_SOC_DAPM_PGA("SPK DAC", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_PGA("ESL DAC", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_SWITCH("HP Amp", CS42L73_PWRCTL3, 0, 1, - &hp_amp_ctl), + SND_SOC_DAPM_SWITCH_E("HP Amp", CS42L73_PWRCTL3, 0, 1, + &hp_amp_ctl, cs42l73_hp_amp_event, + SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_SWITCH("LO Amp", CS42L73_PWRCTL3, 1, 1, &lo_amp_ctl), - SND_SOC_DAPM_SWITCH("SPK Amp", CS42L73_PWRCTL3, 2, 1, - &spk_amp_ctl), - SND_SOC_DAPM_SWITCH("EAR Amp", CS42L73_PWRCTL3, 3, 1, - &ear_amp_ctl), - SND_SOC_DAPM_SWITCH("SPKLO Amp", CS42L73_PWRCTL3, 4, 1, - &spklo_amp_ctl), + SND_SOC_DAPM_SWITCH_E("SPK Amp", CS42L73_PWRCTL3, 2, 1, + &spk_amp_ctl, cs42l73_spklo_spk_amp_event, + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_SWITCH_E("EAR Amp", CS42L73_PWRCTL3, 3, 1, + &ear_amp_ctl, cs42l73_ear_amp_event, + SND_SOC_DAPM_POST_PMD), + SND_SOC_DAPM_SWITCH_E("SPKLO Amp", CS42L73_PWRCTL3, 4, 1, + &spklo_amp_ctl, cs42l73_spklo_spk_amp_event, + SND_SOC_DAPM_POST_PMD), SND_SOC_DAPM_OUTPUT("HPOUTA"), SND_SOC_DAPM_OUTPUT("HPOUTB"), @@ -1171,6 +1227,14 @@ static int cs42l73_set_bias_level(struct snd_soc_codec *codec, case SND_SOC_BIAS_OFF: snd_soc_update_bits(codec, CS42L73_PWRCTL1, PDN, 1); + if (cs42l73->shutdwn_delay > 0) { + mdelay(cs42l73->shutdwn_delay); + cs42l73->shutdwn_delay = 0; + } else { + mdelay(15); /* Min amount of time requred to power + * down. + */ + } snd_soc_update_bits(codec, CS42L73_DMMCC, MCLKDIS, 1); break; } -- cgit v0.10.2 From 7f3dd4a8e31cdaed5f80f24b798cedcab644830b Mon Sep 17 00:00:00 2001 From: Paul Handrigan Date: Fri, 7 Dec 2012 14:53:44 -0600 Subject: ASoC: cs42l73: Change VSPIN/VSPOUT to VSPINOUT Since VSP only has one power bit, only provide one DAPM widget. Signed-off-by: Paul Handrigan Signed-off-by: Mark Brown diff --git a/sound/soc/codecs/cs42l73.c b/sound/soc/codecs/cs42l73.c index fb9b178..dd0d9b2 100644 --- a/sound/soc/codecs/cs42l73.c +++ b/sound/soc/codecs/cs42l73.c @@ -658,9 +658,7 @@ static const struct snd_soc_dapm_widget cs42l73_dapm_widgets[] = { CS42L73_PWRCTL2, 3, 1), SND_SOC_DAPM_AIF_OUT("ASPOUTR", NULL, 0, CS42L73_PWRCTL2, 3, 1), - SND_SOC_DAPM_AIF_OUT("VSPOUTL", NULL, 0, - CS42L73_PWRCTL2, 4, 1), - SND_SOC_DAPM_AIF_OUT("VSPOUTR", NULL, 0, + SND_SOC_DAPM_AIF_OUT("VSPINOUT", NULL, 0, CS42L73_PWRCTL2, 4, 1), SND_SOC_DAPM_PGA("PGA Left", SND_SOC_NOPM, 0, 0, NULL, 0), @@ -686,8 +684,7 @@ static const struct snd_soc_dapm_widget cs42l73_dapm_widgets[] = { SND_SOC_DAPM_MIXER("ASPR Output Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("XSPL Output Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_MIXER("XSPR Output Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_MIXER("VSPL Output Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), - SND_SOC_DAPM_MIXER("VSPR Output Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), + SND_SOC_DAPM_MIXER("VSP Output Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), SND_SOC_DAPM_AIF_IN("XSPINL", NULL, 0, CS42L73_PWRCTL2, 0, 1), @@ -703,7 +700,7 @@ static const struct snd_soc_dapm_widget cs42l73_dapm_widgets[] = { SND_SOC_DAPM_AIF_IN("ASPINM", NULL, 0, CS42L73_PWRCTL2, 2, 1), - SND_SOC_DAPM_AIF_IN("VSPIN", NULL, 0, + SND_SOC_DAPM_AIF_IN("VSPINOUT", NULL, 0, CS42L73_PWRCTL2, 4, 1), SND_SOC_DAPM_MIXER("HL Left Mixer", SND_SOC_NOPM, 0, 0, NULL, 0), @@ -763,7 +760,7 @@ static const struct snd_soc_dapm_route cs42l73_audio_map[] = { {"ESL DAC", "ESL-ASP Mono Volume", "ESL Mixer"}, {"ESL DAC", "ESL-XSP Mono Volume", "ESL Mixer"}, - {"ESL DAC", "ESL-VSP Mono Volume", "VSPIN"}, + {"ESL DAC", "ESL-VSP Mono Volume", "VSPINOUT"}, /* Loopback */ {"ESL DAC", "ESL-IP Mono Volume", "Input Left Capture"}, {"ESL DAC", "ESL-IP Mono Volume", "Input Right Capture"}, @@ -785,7 +782,7 @@ static const struct snd_soc_dapm_route cs42l73_audio_map[] = { {"SPK DAC", "SPK-ASP Mono Volume", "SPK Mixer"}, {"SPK DAC", "SPK-XSP Mono Volume", "SPK Mixer"}, - {"SPK DAC", "SPK-VSP Mono Volume", "VSPIN"}, + {"SPK DAC", "SPK-VSP Mono Volume", "VSPINOUT"}, /* Loopback */ {"SPK DAC", "SPK-IP Mono Volume", "Input Left Capture"}, {"SPK DAC", "SPK-IP Mono Volume", "Input Right Capture"}, @@ -828,8 +825,8 @@ static const struct snd_soc_dapm_route cs42l73_audio_map[] = { {"HL Right Mixer", NULL, "ASPINR"}, {"HL Left Mixer", NULL, "XSPINL"}, {"HL Right Mixer", NULL, "XSPINR"}, - {"HL Left Mixer", NULL, "VSPIN"}, - {"HL Right Mixer", NULL, "VSPIN"}, + {"HL Left Mixer", NULL, "VSPINOUT"}, + {"HL Right Mixer", NULL, "VSPINOUT"}, {"ASPINL", NULL, "ASP Playback"}, {"ASPINM", NULL, "ASP Playback"}, @@ -837,7 +834,7 @@ static const struct snd_soc_dapm_route cs42l73_audio_map[] = { {"XSPINL", NULL, "XSP Playback"}, {"XSPINM", NULL, "XSP Playback"}, {"XSPINR", NULL, "XSP Playback"}, - {"VSPIN", NULL, "VSP Playback"}, + {"VSPINOUT", NULL, "VSP Playback"}, /* Capture Paths */ {"MIC1", NULL, "MIC1 Bias"}, @@ -879,21 +876,18 @@ static const struct snd_soc_dapm_route cs42l73_audio_map[] = { {"XSPOUTR", NULL, "XSPR Output Mixer"}, /* Voice Capture */ - {"VSPL Output Mixer", NULL, "Input Left Capture"}, - {"VSPR Output Mixer", NULL, "Input Left Capture"}, + {"VSP Output Mixer", NULL, "Input Left Capture"}, + {"VSP Output Mixer", NULL, "Input Right Capture"}, - {"VSPOUTL", "VSP-IP Volume", "VSPL Output Mixer"}, - {"VSPOUTR", "VSP-IP Volume", "VSPR Output Mixer"}, + {"VSPINOUT", "VSP-IP Volume", "VSP Output Mixer"}, - {"VSPOUTL", NULL, "VSPL Output Mixer"}, - {"VSPOUTR", NULL, "VSPR Output Mixer"}, + {"VSPINOUT", NULL, "VSP Output Mixer"}, {"ASP Capture", NULL, "ASPOUTL"}, {"ASP Capture", NULL, "ASPOUTR"}, {"XSP Capture", NULL, "XSPOUTL"}, {"XSP Capture", NULL, "XSPOUTR"}, - {"VSP Capture", NULL, "VSPOUTL"}, - {"VSP Capture", NULL, "VSPOUTR"}, + {"VSP Capture", NULL, "VSPINOUT"}, }; struct cs42l73_mclk_div { -- cgit v0.10.2 From c871bd0b2e627ff387d0ff055d8175879c80d01f Mon Sep 17 00:00:00 2001 From: Mark Brown Date: Mon, 10 Dec 2012 16:19:52 +0900 Subject: ASoC: core: Fix splitting of log messages Don't wrap log messages over multiple lines, it makes them hard to grep for. Signed-off-by: Mark Brown diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index cee37ee..0d42afb 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -4155,9 +4155,9 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card, ret = of_property_read_string_index(np, propname, 2 * i, &routes[i].sink); if (ret) { - dev_err(card->dev, "ASoC: Property '%s' index %d" - " could not be read: %d\n", propname, 2 * i, - ret); + dev_err(card->dev, + "ASoC: Property '%s' index %d could not be read: %d\n", + propname, 2 * i, ret); kfree(routes); return -EINVAL; } @@ -4165,8 +4165,8 @@ int snd_soc_of_parse_audio_routing(struct snd_soc_card *card, (2 * i) + 1, &routes[i].source); if (ret) { dev_err(card->dev, - "ASoC: Property '%s' index %d could not be" - " read: %d\n", propname, (2 * i) + 1, ret); + "ASoC: Property '%s' index %d could not be read: %d\n", + propname, (2 * i) + 1, ret); kfree(routes); return -EINVAL; } -- cgit v0.10.2 From 31f8d42d44b48ba72b586ca03e810cbbd21ea16b Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 10 Dec 2012 10:47:45 -0800 Subject: Revert "mm: avoid waking kswapd for THP allocations when compaction is deferred or contended" This reverts commit 782fd30406ecb9d9b082816abe0c6008fc72a7b0. We are going to reinstate the __GFP_NO_KSWAPD flag that has been removed, the removal reverted, and then removed again. Making this commit a pointless fixup for a problem that was caused by the removal of __GFP_NO_KSWAPD flag. The thing is, we really don't want to wake up kswapd for THP allocations (because they fail quite commonly under any kind of memory pressure, including when there is tons of memory free), and these patches were just trying to fix up the underlying bug: the original removal of __GFP_NO_KSWAPD in commit c654345924f7 ("mm: remove __GFP_NO_KSWAPD") was simply bogus. Signed-off-by: Linus Torvalds diff --git a/mm/page_alloc.c b/mm/page_alloc.c index a8f2c87..8193809 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2378,15 +2378,6 @@ bool gfp_pfmemalloc_allowed(gfp_t gfp_mask) return !!(gfp_to_alloc_flags(gfp_mask) & ALLOC_NO_WATERMARKS); } -/* Returns true if the allocation is likely for THP */ -static bool is_thp_alloc(gfp_t gfp_mask, unsigned int order) -{ - if (order == pageblock_order && - (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE) - return true; - return false; -} - static inline struct page * __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, struct zonelist *zonelist, enum zone_type high_zoneidx, @@ -2425,9 +2416,7 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, goto nopage; restart: - /* The decision whether to wake kswapd for THP is made later */ - if (!is_thp_alloc(gfp_mask, order)) - wake_all_kswapd(order, zonelist, high_zoneidx, + wake_all_kswapd(order, zonelist, high_zoneidx, zone_idx(preferred_zone)); /* @@ -2498,21 +2487,15 @@ rebalance: goto got_pg; sync_migration = true; - if (is_thp_alloc(gfp_mask, order)) { - /* - * If compaction is deferred for high-order allocations, it is - * because sync compaction recently failed. If this is the case - * and the caller requested a movable allocation that does not - * heavily disrupt the system then fail the allocation instead - * of entering direct reclaim. - */ - if (deferred_compaction || contended_compaction) - goto nopage; - - /* If process is willing to reclaim/compact then wake kswapd */ - wake_all_kswapd(order, zonelist, high_zoneidx, - zone_idx(preferred_zone)); - } + /* + * If compaction is deferred for high-order allocations, it is because + * sync compaction recently failed. In this is the case and the caller + * requested a movable allocation that does not heavily disrupt the + * system then fail the allocation instead of entering direct reclaim. + */ + if ((deferred_compaction || contended_compaction) && + (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE) + goto nopage; /* Try direct reclaim and then allocating */ page = __alloc_pages_direct_reclaim(gfp_mask, order, -- cgit v0.10.2 From 1bf3751ec90cc3174e01f0d701e8449ce163d113 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sun, 9 Dec 2012 23:41:06 +0000 Subject: ipv4: ip_check_defrag must not modify skb before unsharing ip_check_defrag() might be called from af_packet within the RX path where shared SKBs are used, so it must not modify the input SKB before it has unshared it for defragmentation. Use skb_copy_bits() to get the IP header and only pull in everything later. The same is true for the other caller in macvlan as it is called from dev->rx_handler which can also get a shared SKB. Reported-by: Eric Leblond Cc: stable@vger.kernel.org Signed-off-by: Johannes Berg Signed-off-by: David S. Miller diff --git a/net/ipv4/ip_fragment.c b/net/ipv4/ip_fragment.c index 448e685..8d5cc75 100644 --- a/net/ipv4/ip_fragment.c +++ b/net/ipv4/ip_fragment.c @@ -707,28 +707,27 @@ EXPORT_SYMBOL(ip_defrag); struct sk_buff *ip_check_defrag(struct sk_buff *skb, u32 user) { - const struct iphdr *iph; + struct iphdr iph; u32 len; if (skb->protocol != htons(ETH_P_IP)) return skb; - if (!pskb_may_pull(skb, sizeof(struct iphdr))) + if (!skb_copy_bits(skb, 0, &iph, sizeof(iph))) return skb; - iph = ip_hdr(skb); - if (iph->ihl < 5 || iph->version != 4) + if (iph.ihl < 5 || iph.version != 4) return skb; - if (!pskb_may_pull(skb, iph->ihl*4)) - return skb; - iph = ip_hdr(skb); - len = ntohs(iph->tot_len); - if (skb->len < len || len < (iph->ihl * 4)) + + len = ntohs(iph.tot_len); + if (skb->len < len || len < (iph.ihl * 4)) return skb; - if (ip_is_fragment(ip_hdr(skb))) { + if (ip_is_fragment(&iph)) { skb = skb_share_check(skb, GFP_ATOMIC); if (skb) { + if (!pskb_may_pull(skb, iph.ihl*4)) + return skb; if (pskb_trim_rcsum(skb, len)) return skb; memset(IPCB(skb), 0, sizeof(struct inet_skb_parm)); -- cgit v0.10.2 From caf491916b1c1e939a2c7575efb7a77f11fc9bdf Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 10 Dec 2012 10:51:16 -0800 Subject: Revert "revert "Revert "mm: remove __GFP_NO_KSWAPD""" and associated damage This reverts commits a50915394f1fc02c2861d3b7ce7014788aa5066e and d7c3b937bdf45f0b844400b7bf6fd3ed50bac604. This is a revert of a revert of a revert. In addition, it reverts the even older i915 change to stop using the __GFP_NO_KSWAPD flag due to the original commits in linux-next. It turns out that the original patch really was bogus, and that the original revert was the correct thing to do after all. We thought we had fixed the problem, and then reverted the revert, but the problem really is fundamental: waking up kswapd simply isn't the right thing to do, and direct reclaim sometimes simply _is_ the right thing to do. When certain allocations fail, we simply should try some direct reclaim, and if that fails, fail the allocation. That's the right thing to do for THP allocations, which can easily fail, and the GPU allocations want to do that too. So starting kswapd is sometimes simply wrong, and removing the flag that said "don't start kswapd" was a mistake. Let's hope we never revisit this mistake again - and certainly not this many times ;) Acked-by: Mel Gorman Acked-by: Johannes Weiner Cc: Rik van Riel Cc: Andrew Morton Signed-off-by: Linus Torvalds diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 107f09b..9b285da 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -1796,7 +1796,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) */ mapping = obj->base.filp->f_path.dentry->d_inode->i_mapping; gfp = mapping_gfp_mask(mapping); - gfp |= __GFP_NORETRY | __GFP_NOWARN; + gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD; gfp &= ~(__GFP_IO | __GFP_WAIT); for_each_sg(st->sgl, sg, page_count, i) { page = shmem_read_mapping_page_gfp(mapping, i, gfp); @@ -1809,7 +1809,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) * our own buffer, now let the real VM do its job and * go down in flames if truly OOM. */ - gfp &= ~(__GFP_NORETRY | __GFP_NOWARN); + gfp &= ~(__GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD); gfp |= __GFP_IO | __GFP_WAIT; i915_gem_shrink_all(dev_priv); @@ -1817,7 +1817,7 @@ i915_gem_object_get_pages_gtt(struct drm_i915_gem_object *obj) if (IS_ERR(page)) goto err_pages; - gfp |= __GFP_NORETRY | __GFP_NOWARN; + gfp |= __GFP_NORETRY | __GFP_NOWARN | __GFP_NO_KSWAPD; gfp &= ~(__GFP_IO | __GFP_WAIT); } diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 374c46d..ec794a7 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -1077,7 +1077,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); * until the request succeeds or until the allocation size falls below * the system page size. This attempts to make sure it does not adversely * impact system performance, so when allocating more than one page, we - * ask the memory allocator to avoid re-trying. + * ask the memory allocator to avoid re-trying, swapping, writing back + * or performing I/O. * * Note, this function also makes sure that the allocated buffer is aligned to * the MTD device's min. I/O unit, i.e. the "mtd->writesize" value. @@ -1091,7 +1092,8 @@ EXPORT_SYMBOL_GPL(mtd_writev); */ void *mtd_kmalloc_up_to(const struct mtd_info *mtd, size_t *size) { - gfp_t flags = __GFP_NOWARN | __GFP_WAIT | __GFP_NORETRY; + gfp_t flags = __GFP_NOWARN | __GFP_WAIT | + __GFP_NORETRY | __GFP_NO_KSWAPD; size_t min_alloc = max_t(size_t, mtd->writesize, PAGE_SIZE); void *kbuf; diff --git a/include/linux/gfp.h b/include/linux/gfp.h index 76e1aa2..d0a7967 100644 --- a/include/linux/gfp.h +++ b/include/linux/gfp.h @@ -30,9 +30,10 @@ struct vm_area_struct; #define ___GFP_HARDWALL 0x20000u #define ___GFP_THISNODE 0x40000u #define ___GFP_RECLAIMABLE 0x80000u -#define ___GFP_NOTRACK 0x100000u -#define ___GFP_OTHER_NODE 0x200000u -#define ___GFP_WRITE 0x400000u +#define ___GFP_NOTRACK 0x200000u +#define ___GFP_NO_KSWAPD 0x400000u +#define ___GFP_OTHER_NODE 0x800000u +#define ___GFP_WRITE 0x1000000u /* * GFP bitmasks.. @@ -85,6 +86,7 @@ struct vm_area_struct; #define __GFP_RECLAIMABLE ((__force gfp_t)___GFP_RECLAIMABLE) /* Page is reclaimable */ #define __GFP_NOTRACK ((__force gfp_t)___GFP_NOTRACK) /* Don't track with kmemcheck */ +#define __GFP_NO_KSWAPD ((__force gfp_t)___GFP_NO_KSWAPD) #define __GFP_OTHER_NODE ((__force gfp_t)___GFP_OTHER_NODE) /* On behalf of other node */ #define __GFP_WRITE ((__force gfp_t)___GFP_WRITE) /* Allocator intends to dirty page */ @@ -94,7 +96,7 @@ struct vm_area_struct; */ #define __GFP_NOTRACK_FALSE_POSITIVE (__GFP_NOTRACK) -#define __GFP_BITS_SHIFT 23 /* Room for N __GFP_FOO bits */ +#define __GFP_BITS_SHIFT 25 /* Room for N __GFP_FOO bits */ #define __GFP_BITS_MASK ((__force gfp_t)((1 << __GFP_BITS_SHIFT) - 1)) /* This equals 0, but use constants in case they ever change */ @@ -114,7 +116,8 @@ struct vm_area_struct; __GFP_MOVABLE) #define GFP_IOFS (__GFP_IO | __GFP_FS) #define GFP_TRANSHUGE (GFP_HIGHUSER_MOVABLE | __GFP_COMP | \ - __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN) + __GFP_NOMEMALLOC | __GFP_NORETRY | __GFP_NOWARN | \ + __GFP_NO_KSWAPD) #ifdef CONFIG_NUMA #define GFP_THISNODE (__GFP_THISNODE | __GFP_NOWARN | __GFP_NORETRY) diff --git a/include/trace/events/gfpflags.h b/include/trace/events/gfpflags.h index 9391706..d6fd8e5 100644 --- a/include/trace/events/gfpflags.h +++ b/include/trace/events/gfpflags.h @@ -36,6 +36,7 @@ {(unsigned long)__GFP_RECLAIMABLE, "GFP_RECLAIMABLE"}, \ {(unsigned long)__GFP_MOVABLE, "GFP_MOVABLE"}, \ {(unsigned long)__GFP_NOTRACK, "GFP_NOTRACK"}, \ + {(unsigned long)__GFP_NO_KSWAPD, "GFP_NO_KSWAPD"}, \ {(unsigned long)__GFP_OTHER_NODE, "GFP_OTHER_NODE"} \ ) : "GFP_NOWAIT" diff --git a/mm/page_alloc.c b/mm/page_alloc.c index 8193809..7e208f0 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2416,8 +2416,9 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order, goto nopage; restart: - wake_all_kswapd(order, zonelist, high_zoneidx, - zone_idx(preferred_zone)); + if (!(gfp_mask & __GFP_NO_KSWAPD)) + wake_all_kswapd(order, zonelist, high_zoneidx, + zone_idx(preferred_zone)); /* * OK, we're below the kswapd watermark and have kicked background @@ -2494,7 +2495,7 @@ rebalance: * system then fail the allocation instead of entering direct reclaim. */ if ((deferred_compaction || contended_compaction) && - (gfp_mask & (__GFP_MOVABLE|__GFP_REPEAT)) == __GFP_MOVABLE) + (gfp_mask & __GFP_NO_KSWAPD)) goto nopage; /* Try direct reclaim and then allocating */ -- cgit v0.10.2 From 55220bb3e5f917dd5fee1153c612f9a83599f639 Mon Sep 17 00:00:00 2001 From: Florian Fainelli Date: Mon, 10 Dec 2012 12:25:32 -0800 Subject: Input: matrix-keymap - provide proper module license The matrix-keymap module is currently lacking a proper module license, add one so we don't have this module tainting the entire kernel. This issue has been present since commit 1932811f426f ("Input: matrix-keymap - uninline and prepare for device tree support") Signed-off-by: Florian Fainelli CC: stable@vger.kernel.org # v3.5+ Signed-off-by: Dmitry Torokhov Signed-off-by: Linus Torvalds diff --git a/drivers/input/matrix-keymap.c b/drivers/input/matrix-keymap.c index 443ad64b..d88d9be 100644 --- a/drivers/input/matrix-keymap.c +++ b/drivers/input/matrix-keymap.c @@ -23,6 +23,7 @@ #include #include #include +#include #include static bool matrix_keypad_map_key(struct input_dev *input_dev, @@ -161,3 +162,5 @@ int matrix_keypad_build_keymap(const struct matrix_keymap_data *keymap_data, return 0; } EXPORT_SYMBOL(matrix_keypad_build_keymap); + +MODULE_LICENSE("GPL"); -- cgit v0.10.2 From 29594404d7fe73cd80eaa4ee8c43dcc53970c60e Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Mon, 10 Dec 2012 19:30:57 -0800 Subject: Linux 3.7 diff --git a/Makefile b/Makefile index 346e28f..540f7b2 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 7 SUBLEVEL = 0 -EXTRAVERSION = -rc8 +EXTRAVERSION = NAME = Terrified Chipmunk # *DOCUMENTATION* -- cgit v0.10.2 From 9bffb1fb7c22c96d51d4ba06e2e023dd568a5872 Mon Sep 17 00:00:00 2001 From: Misael Lopez Cruz Date: Thu, 13 Dec 2012 12:23:05 -0600 Subject: ASoC: Prevent pop_wait overwrite pop_wait is used to determine if a deferred playback close needs to be cancelled when the a PCM is open or if after the power-down delay expires it needs to run. pop_wait is associated with the CODEC DAI, so the CODEC DAI must be unique. This holds true for most CODECs, except for the dummy CODEC and its DAI. In DAI links with non-unique dummy CODECs (e.g. front-ends), pop_wait can be overwritten by another DAI link using also a dummy CODEC. Failure to cancel a deferred close can cause mute due to the DAPM STOP event sent in the deferred work. One scenario where pop_wait is overwritten and causing mute is below (where hw:0,0 and hw:0,1 are two front-ends with default pmdown_time = 5 secs): aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE -d 1 sleep 1 aplay /dev/urandom -D hw:0,1 -c 2 -r 48000 -f S16_LE -d 3 & aplay /dev/urandom -D hw:0,0 -c 2 -r 48000 -f S16_LE Since CODECs may not be unique, pop_wait is moved to the PCM runtime structure. Creating separate dummy CODECs for each DAI link can also solve the problem, but at this point it's only pop_wait variable in the CODEC DAI that has negative effects by not being unique. Signed-off-by: Misael Lopez Cruz Signed-off-by: Mark Brown diff --git a/include/sound/soc-dai.h b/include/sound/soc-dai.h index 628db7b..3953cea 100644 --- a/include/sound/soc-dai.h +++ b/include/sound/soc-dai.h @@ -242,7 +242,6 @@ struct snd_soc_dai { unsigned int symmetric_rates:1; struct snd_pcm_runtime *runtime; unsigned int active; - unsigned char pop_wait:1; unsigned char probed:1; struct snd_soc_dapm_widget *playback_widget; diff --git a/include/sound/soc.h b/include/sound/soc.h index 91244a0..769e27c 100644 --- a/include/sound/soc.h +++ b/include/sound/soc.h @@ -1039,6 +1039,7 @@ struct snd_soc_pcm_runtime { struct snd_soc_dpcm_runtime dpcm[2]; long pmdown_time; + unsigned char pop_wait:1; /* runtime devices */ struct snd_pcm *pcm; diff --git a/sound/soc/soc-compress.c b/sound/soc/soc-compress.c index 967d0e1..5fbfb06 100644 --- a/sound/soc/soc-compress.c +++ b/sound/soc/soc-compress.c @@ -113,7 +113,7 @@ static int soc_compr_free(struct snd_compr_stream *cstream) SNDRV_PCM_STREAM_PLAYBACK, SND_SOC_DAPM_STREAM_STOP); } else - codec_dai->pop_wait = 1; + rtd->pop_wait = 1; schedule_delayed_work(&rtd->delayed_work, msecs_to_jiffies(rtd->pmdown_time)); } else { diff --git a/sound/soc/soc-pcm.c b/sound/soc/soc-pcm.c index ef22d0b..3a2423b 100644 --- a/sound/soc/soc-pcm.c +++ b/sound/soc/soc-pcm.c @@ -333,11 +333,11 @@ static void close_delayed_work(struct work_struct *work) pr_debug("pop wq checking: %s status: %s waiting: %s\n", codec_dai->driver->playback.stream_name, codec_dai->playback_active ? "active" : "inactive", - codec_dai->pop_wait ? "yes" : "no"); + rtd->pop_wait ? "yes" : "no"); /* are we waiting on this codec DAI stream */ - if (codec_dai->pop_wait == 1) { - codec_dai->pop_wait = 0; + if (rtd->pop_wait == 1) { + rtd->pop_wait = 0; snd_soc_dapm_stream_event(rtd, SNDRV_PCM_STREAM_PLAYBACK, SND_SOC_DAPM_STREAM_STOP); } @@ -407,7 +407,7 @@ static int soc_pcm_close(struct snd_pcm_substream *substream) SND_SOC_DAPM_STREAM_STOP); } else { /* start delayed pop wq here for playback streams */ - codec_dai->pop_wait = 1; + rtd->pop_wait = 1; schedule_delayed_work(&rtd->delayed_work, msecs_to_jiffies(rtd->pmdown_time)); } @@ -478,8 +478,8 @@ static int soc_pcm_prepare(struct snd_pcm_substream *substream) /* cancel any delayed stream shutdown that is pending */ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK && - codec_dai->pop_wait) { - codec_dai->pop_wait = 0; + rtd->pop_wait) { + rtd->pop_wait = 0; cancel_delayed_work(&rtd->delayed_work); } -- cgit v0.10.2 From 315656bc3bf5b24e560ab1d9e2d49a5e987b49b4 Mon Sep 17 00:00:00 2001 From: Bo Shen Date: Thu, 13 Dec 2012 10:05:07 +0800 Subject: ASoC: atmel-ssc: change disable to disable in dts node Change the value of status to disabled to keep the consistent Signed-off-by: Bo Shen Signed-off-by: Mark Brown diff --git a/arch/arm/boot/dts/at91sam9260.dtsi b/arch/arm/boot/dts/at91sam9260.dtsi index aaa42d8..03c56cb 100644 --- a/arch/arm/boot/dts/at91sam9260.dtsi +++ b/arch/arm/boot/dts/at91sam9260.dtsi @@ -217,7 +217,7 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfffbc000 0x4000>; interrupts = <14 4 5>; - status = "disable"; + status = "disabled"; }; adc0: adc@fffe0000 { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index 3b721ee..15f12dd 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -179,14 +179,14 @@ compatible = "atmel,at91rm9200-ssc"; reg = <0xfff98000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fff9c000 { compatible = "atmel,at91rm9200-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; macb0: ethernet@fffbc000 { diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index acfa207..44a38d0 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -232,14 +232,14 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xfff9c000 0x4000>; interrupts = <16 4 5>; - status = "disable"; + status = "disabled"; }; ssc1: ssc@fffa0000 { compatible = "atmel,at91sam9g45-ssc"; reg = <0xfffa0000 0x4000>; interrupts = <17 4 5>; - status = "disable"; + status = "disabled"; }; adc0: adc@fffb0000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 69667d0..0beff72 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -92,7 +92,7 @@ compatible = "atmel,at91sam9g45-ssc"; reg = <0xf0010000 0x4000>; interrupts = <28 4 5>; - status = "disable"; + status = "disabled"; }; tcb0: timer@f8008000 { -- cgit v0.10.2