From 12183a20a8baf009bf570ab3db45a27fd6b1fd03 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Wed, 21 Dec 2011 23:01:20 +0100 Subject: mtd: nand: fix typo in comment Funny one :) "Heck" fits somehow, too, but I am sure it was meant to be "Check". Signed-off-by: Wolfram Sang Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 35b4565..8a393f9 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2588,7 +2588,7 @@ int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr, instr->state = MTD_ERASING; while (len) { - /* Heck if we have a bad block, we do not erase bad blocks! */ + /* Check if we have a bad block, we do not erase bad blocks! */ if (nand_block_checkbad(mtd, ((loff_t) page) << chip->page_shift, 0, allowbbt)) { pr_warn("%s: attempt to erase a bad block at page 0x%08x\n", -- cgit v0.10.2 From 9398d1ce09b9009996f7d2468e1d3c785fa6feda Mon Sep 17 00:00:00 2001 From: Huang Shijie Date: Wed, 4 Jan 2012 11:18:46 +0800 Subject: mtd: gpmi-nand bugfix: reset the BCH module when it is not MX23 In MX28, if we do not reset the BCH module. The BCH module may becomes unstable when the board reboots for several thousands times. This bug has been catched in customer's production. The patch adds some comments (some from Wolfram Sang), and fixes it now. Also change gpmi_reset_block() to static. Signed-off-by: Huang Shijie Acked-by: Marek Vasut Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Cc: stable@kernel.org [3.1+] diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index 2a56fc6..c56f8e0 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -69,17 +69,19 @@ static int clear_poll_bit(void __iomem *addr, u32 mask) * [1] enable the module. * [2] reset the module. * - * In most of the cases, it's ok. But there is a hardware bug in the BCH block. + * In most of the cases, it's ok. + * But in MX23, there is a hardware bug in the BCH block (see erratum #2847). * If you try to soft reset the BCH block, it becomes unusable until * the next hard reset. This case occurs in the NAND boot mode. When the board * boots by NAND, the ROM of the chip will initialize the BCH blocks itself. * So If the driver tries to reset the BCH again, the BCH will not work anymore. - * You will see a DMA timeout in this case. + * You will see a DMA timeout in this case. The bug has been fixed + * in the following chips, such as MX28. * * To avoid this bug, just add a new parameter `just_enable` for * the mxs_reset_block(), and rewrite it here. */ -int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) +static int gpmi_reset_block(void __iomem *reset_addr, bool just_enable) { int ret; int timeout = 0x400; @@ -206,7 +208,15 @@ int bch_set_geometry(struct gpmi_nand_data *this) if (ret) goto err_out; - ret = gpmi_reset_block(r->bch_regs, true); + /* + * Due to erratum #2847 of the MX23, the BCH cannot be soft reset on this + * chip, otherwise it will lock up. So we skip resetting BCH on the MX23. + * On the other hand, the MX28 needs the reset, because one case has been + * seen where the BCH produced ECC errors constantly after 10000 + * consecutive reboots. The latter case has not been seen on the MX23 yet, + * still we don't know if it could happen there as well. + */ + ret = gpmi_reset_block(r->bch_regs, GPMI_IS_MX23(this)); if (ret) goto err_out; -- cgit v0.10.2 From bce41d601e58af12cee1398fe836e6b9a8fb5396 Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Tue, 10 Jan 2012 15:32:29 +0200 Subject: jffs2: do not initialize variable unnecessarily Remove unnecessary initializer for a local variable. Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse diff --git a/fs/jffs2/erase.c b/fs/jffs2/erase.c index a01cdad..eafb8d3 100644 --- a/fs/jffs2/erase.c +++ b/fs/jffs2/erase.c @@ -335,7 +335,7 @@ static int jffs2_block_check_erase(struct jffs2_sb_info *c, struct jffs2_erasebl void *ebuf; uint32_t ofs; size_t retlen; - int ret = -EIO; + int ret; unsigned long *wordebuf; ret = mtd_point(c->mtd, jeb->offset, c->sector_size, &retlen, -- cgit v0.10.2 From 1a30871fe635d3e92972e6b93e39ff65bb57e52d Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Mon, 16 Jan 2012 11:07:16 +0200 Subject: mtd: fix MTD suspend Commits 3fe4bae88460869a8e553397cd9057a4ee7ca341 and 079c985e7a6f4ce60f931cebfdd5ee3c3 broke MTD suspend in 2 ways: 1. When the '->suspend' method is not present, we return -EOPNOTSUPP, but the callers of 'mtd_suspend()' expects 0 instead. 2. Checking of the 'mtd' parameter against NULL has been incorrectly removed in 'mtd_cls_suspend()'. This patch fixes the breakages. This has been found, analyzed, reported and tested by Rafael J. Wysocki . Note, this patch is not needed in the stable tree because it causes a regression introduced during the v3.3 merge window. Reported-by: Rafael J. Wysocki Tested-by: Rafael J. Wysocki Tested-by: Russell King Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 6ae9ca0..9a9ce71 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -119,7 +119,7 @@ static int mtd_cls_suspend(struct device *dev, pm_message_t state) { struct mtd_info *mtd = dev_get_drvdata(dev); - return mtd_suspend(mtd); + return mtd ? mtd_suspend(mtd) : 0; } static int mtd_cls_resume(struct device *dev) diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 1a81fde..d8c7aad 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -427,9 +427,7 @@ static inline int mtd_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len) static inline int mtd_suspend(struct mtd_info *mtd) { - if (!mtd->suspend) - return -EOPNOTSUPP; - return mtd->suspend(mtd); + return mtd->suspend ? mtd->suspend(mtd) : 0; } static inline void mtd_resume(struct mtd_info *mtd) -- cgit v0.10.2 From 500823195d0c9eec2a4637484f30cc93ec633d4a Mon Sep 17 00:00:00 2001 From: Artem Bityutskiy Date: Thu, 2 Feb 2012 13:54:25 +0200 Subject: Revert "mtd: atmel_nand: optimize read/write buffer functions" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This reverts commit fb5427508abbd635e877fabdf55795488119c2d6. The reason is that it breaks 16 bits NAND flash as it was reported by Nikolaus Voss and confirmed by Eric Bénard. Nicolas Ferre alco confirmed: "After double checking with designers, I must admit that I misunderstood the way of optimizing accesses to SMC. 16 bit nand is not so common those days..." Reported-by: Nikolaus Voss Acked-by: Nicolas Ferre Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse Cc: stable@kernel.org [3.1+] diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 4dd056e..35b4fb5 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -161,6 +161,37 @@ static int atmel_nand_device_ready(struct mtd_info *mtd) !!host->board->rdy_pin_active_low; } +/* + * Minimal-overhead PIO for data access. + */ +static void atmel_read_buf8(struct mtd_info *mtd, u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_readsb(nand_chip->IO_ADDR_R, buf, len); +} + +static void atmel_read_buf16(struct mtd_info *mtd, u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_readsw(nand_chip->IO_ADDR_R, buf, len / 2); +} + +static void atmel_write_buf8(struct mtd_info *mtd, const u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_writesb(nand_chip->IO_ADDR_W, buf, len); +} + +static void atmel_write_buf16(struct mtd_info *mtd, const u8 *buf, int len) +{ + struct nand_chip *nand_chip = mtd->priv; + + __raw_writesw(nand_chip->IO_ADDR_W, buf, len / 2); +} + static void dma_complete_func(void *completion) { complete(completion); @@ -235,27 +266,33 @@ err_buf: static void atmel_read_buf(struct mtd_info *mtd, u8 *buf, int len) { struct nand_chip *chip = mtd->priv; + struct atmel_nand_host *host = chip->priv; if (use_dma && len > mtd->oobsize) /* only use DMA for bigger than oob size: better performances */ if (atmel_nand_dma_op(mtd, buf, len, 1) == 0) return; - /* if no DMA operation possible, use PIO */ - memcpy_fromio(buf, chip->IO_ADDR_R, len); + if (host->board->bus_width_16) + atmel_read_buf16(mtd, buf, len); + else + atmel_read_buf8(mtd, buf, len); } static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len) { struct nand_chip *chip = mtd->priv; + struct atmel_nand_host *host = chip->priv; if (use_dma && len > mtd->oobsize) /* only use DMA for bigger than oob size: better performances */ if (atmel_nand_dma_op(mtd, (void *)buf, len, 0) == 0) return; - /* if no DMA operation possible, use PIO */ - memcpy_toio(chip->IO_ADDR_W, buf, len); + if (host->board->bus_width_16) + atmel_write_buf16(mtd, buf, len); + else + atmel_write_buf8(mtd, buf, len); } /* -- cgit v0.10.2