From a4f606ea73d56d15f28653d2242e54d58bb612e5 Mon Sep 17 00:00:00 2001 From: Chun-Yeow Yeoh Date: Mon, 11 Jun 2012 11:59:36 +0800 Subject: {nl,cfg,mac}80211: fix the coding style related to mesh parameters fix the coding style related to mesh parameters, especially the indentation, as pointed out by Johannes Berg. Signed-off-by: Chun-Yeow Yeoh Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index ce9af89..f831078 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1443,7 +1443,7 @@ enum ieee80211_tdls_actioncode { * * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method - * that will be specified in a vendor specific information element + * that will be specified in a vendor specific information element */ enum { IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, @@ -1455,7 +1455,7 @@ enum { * * @IEEE80211_PATH_PROTOCOL_HWMP: the default path selection protocol * @IEEE80211_PATH_PROTOCOL_VENDOR: a vendor specific protocol that will - * be specified in a vendor specific information element + * be specified in a vendor specific information element */ enum { IEEE80211_PATH_PROTOCOL_HWMP = 1, @@ -1467,7 +1467,7 @@ enum { * * @IEEE80211_PATH_METRIC_AIRTIME: the default path selection metric * @IEEE80211_PATH_METRIC_VENDOR: a vendor specific metric that will be - * specified in a vendor specific information element + * specified in a vendor specific information element */ enum { IEEE80211_PATH_METRIC_AIRTIME = 1, diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 970afdf..c61e1621 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -2090,78 +2090,80 @@ enum nl80211_mntr_flags { * @__NL80211_MESHCONF_INVALID: internal use * * @NL80211_MESHCONF_RETRY_TIMEOUT: specifies the initial retry timeout in - * millisecond units, used by the Peer Link Open message + * millisecond units, used by the Peer Link Open message * * @NL80211_MESHCONF_CONFIRM_TIMEOUT: specifies the initial confirm timeout, in - * millisecond units, used by the peer link management to close a peer link + * millisecond units, used by the peer link management to close a peer link * * @NL80211_MESHCONF_HOLDING_TIMEOUT: specifies the holding timeout, in - * millisecond units + * millisecond units * * @NL80211_MESHCONF_MAX_PEER_LINKS: maximum number of peer links allowed - * on this mesh interface + * on this mesh interface * * @NL80211_MESHCONF_MAX_RETRIES: specifies the maximum number of peer link - * open retries that can be sent to establish a new peer link instance in a - * mesh + * open retries that can be sent to establish a new peer link instance in a + * mesh * * @NL80211_MESHCONF_TTL: specifies the value of TTL field set at a source mesh - * point. + * point. * * @NL80211_MESHCONF_AUTO_OPEN_PLINKS: whether we should automatically - * open peer links when we detect compatible mesh peers. + * open peer links when we detect compatible mesh peers. * * @NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES: the number of action frames - * containing a PREQ that an MP can send to a particular destination (path - * target) + * containing a PREQ that an MP can send to a particular destination (path + * target) * * @NL80211_MESHCONF_PATH_REFRESH_TIME: how frequently to refresh mesh paths - * (in milliseconds) + * (in milliseconds) * * @NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT: minimum length of time to wait - * until giving up on a path discovery (in milliseconds) + * until giving up on a path discovery (in milliseconds) * * @NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT: The time (in TUs) for which mesh - * points receiving a PREQ shall consider the forwarding information from the - * root to be valid. (TU = time unit) + * points receiving a PREQ shall consider the forwarding information from + * the root to be valid. (TU = time unit) * * @NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which an MP can send only one action frame containing a PREQ - * reference element + * TUs) during which an MP can send only one action frame containing a PREQ + * reference element * * @NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME: The interval of time (in TUs) - * that it takes for an HWMP information element to propagate across the mesh + * that it takes for an HWMP information element to propagate across the + * mesh * * @NL80211_MESHCONF_HWMP_ROOTMODE: whether root mode is enabled or not * * @NL80211_MESHCONF_ELEMENT_TTL: specifies the value of TTL field set at a - * source mesh point for path selection elements. + * source mesh point for path selection elements. * * @NL80211_MESHCONF_HWMP_RANN_INTERVAL: The interval of time (in TUs) between - * root announcements are transmitted. + * root announcements are transmitted. * * @NL80211_MESHCONF_GATE_ANNOUNCEMENTS: Advertise that this mesh station has - * access to a broader network beyond the MBSS. This is done via Root - * Announcement frames. + * access to a broader network beyond the MBSS. This is done via Root + * Announcement frames. * * @NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL: The minimum interval of time (in - * TUs) during which a mesh STA can send only one Action frame containing a - * PERR element. + * TUs) during which a mesh STA can send only one Action frame containing a + * PERR element. * * @NL80211_MESHCONF_FORWARDING: set Mesh STA as forwarding or non-forwarding - * or forwarding entity (default is TRUE - forwarding entity) + * or forwarding entity (default is TRUE - forwarding entity) * * @NL80211_MESHCONF_RSSI_THRESHOLD: RSSI threshold in dBm. This specifies the - * threshold for average signal strength of candidate station to establish - * a peer link. - * - * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * threshold for average signal strength of candidate station to establish + * a peer link. * * @NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR: maximum number of neighbors - * to synchronize to for 11s default synchronization method (see 11C.12.2.2) + * to synchronize to for 11s default synchronization method + * (see 11C.12.2.2) * * @NL80211_MESHCONF_HT_OPMODE: set mesh HT protection mode. * + * @NL80211_MESHCONF_ATTR_MAX: highest possible mesh configuration attribute + * * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use */ enum nl80211_meshconf_params { @@ -2203,34 +2205,36 @@ enum nl80211_meshconf_params { * @__NL80211_MESH_SETUP_INVALID: Internal use * * @NL80211_MESH_SETUP_ENABLE_VENDOR_PATH_SEL: Enable this option to use a - * vendor specific path selection algorithm or disable it to use the default - * HWMP. + * vendor specific path selection algorithm or disable it to use the + * default HWMP. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC: Enable this option to use a - * vendor specific path metric or disable it to use the default Airtime - * metric. + * vendor specific path metric or disable it to use the default Airtime + * metric. * * @NL80211_MESH_SETUP_IE: Information elements for this mesh, for instance, a - * robust security network ie, or a vendor specific information element that - * vendors will use to identify the path selection methods and metrics in use. + * robust security network ie, or a vendor specific information element + * that vendors will use to identify the path selection methods and + * metrics in use. * * @NL80211_MESH_SETUP_USERSPACE_AUTH: Enable this option if an authentication - * daemon will be authenticating mesh candidates. + * daemon will be authenticating mesh candidates. * * @NL80211_MESH_SETUP_USERSPACE_AMPE: Enable this option if an authentication - * daemon will be securing peer link frames. AMPE is a secured version of Mesh - * Peering Management (MPM) and is implemented with the assistance of a - * userspace daemon. When this flag is set, the kernel will send peer - * management frames to a userspace daemon that will implement AMPE - * functionality (security capabilities selection, key confirmation, and key - * management). When the flag is unset (default), the kernel can autonomously - * complete (unsecured) mesh peering without the need of a userspace daemon. - * - * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number + * daemon will be securing peer link frames. AMPE is a secured version of + * Mesh Peering Management (MPM) and is implemented with the assistance of + * a userspace daemon. When this flag is set, the kernel will send peer + * management frames to a userspace daemon that will implement AMPE + * functionality (security capabilities selection, key confirmation, and + * key management). When the flag is unset (default), the kernel can + * autonomously complete (unsecured) mesh peering without the need of a + * userspace daemon. * * @NL80211_MESH_SETUP_ENABLE_VENDOR_SYNC: Enable this option to use a - * vendor specific synchronization method or disable it to use the default - * neighbor offset synchronization + * vendor specific synchronization method or disable it to use the default + * neighbor offset synchronization + * + * @NL80211_MESH_SETUP_ATTR_MAX: highest possible mesh setup attribute number * * @__NL80211_MESH_SETUP_ATTR_AFTER_LAST: Internal use */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a129ee2..778e533 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -848,21 +848,21 @@ struct mesh_config { u16 dot11MeshConfirmTimeout; u16 dot11MeshHoldingTimeout; u16 dot11MeshMaxPeerLinks; - u8 dot11MeshMaxRetries; - u8 dot11MeshTTL; - u8 element_ttl; + u8 dot11MeshMaxRetries; + u8 dot11MeshTTL; + u8 element_ttl; bool auto_open_plinks; u32 dot11MeshNbrOffsetMaxNeighbor; - u8 dot11MeshHWMPmaxPREQretries; + u8 dot11MeshHWMPmaxPREQretries; u32 path_refresh_time; u16 min_discovery_timeout; u32 dot11MeshHWMPactivePathTimeout; u16 dot11MeshHWMPpreqMinInterval; u16 dot11MeshHWMPperrMinInterval; u16 dot11MeshHWMPnetDiameterTraversalTime; - u8 dot11MeshHWMPRootMode; + u8 dot11MeshHWMPRootMode; u16 dot11MeshHWMPRannInterval; - bool dot11MeshGateAnnouncementProtocol; + bool dot11MeshGateAnnouncementProtocol; bool dot11MeshForwarding; s32 rssi_threshold; u16 ht_opmode; diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 498c94e..f41f9be 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1571,10 +1571,9 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, conf->dot11MeshGateAnnouncementProtocol = nconf->dot11MeshGateAnnouncementProtocol; } - if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) { + if (_chg_mesh_attr(NL80211_MESHCONF_HWMP_RANN_INTERVAL, mask)) conf->dot11MeshHWMPRannInterval = nconf->dot11MeshHWMPRannInterval; - } if (_chg_mesh_attr(NL80211_MESHCONF_FORWARDING, mask)) conf->dot11MeshForwarding = nconf->dot11MeshForwarding; if (_chg_mesh_attr(NL80211_MESHCONF_RSSI_THRESHOLD, mask)) { diff --git a/net/mac80211/debugfs_netdev.c b/net/mac80211/debugfs_netdev.c index d4272ff..c429417 100644 --- a/net/mac80211/debugfs_netdev.c +++ b/net/mac80211/debugfs_netdev.c @@ -468,45 +468,45 @@ IEEE80211_IF_FILE(fwded_unicast, u.mesh.mshstats.fwded_unicast, DEC); IEEE80211_IF_FILE(fwded_frames, u.mesh.mshstats.fwded_frames, DEC); IEEE80211_IF_FILE(dropped_frames_ttl, u.mesh.mshstats.dropped_frames_ttl, DEC); IEEE80211_IF_FILE(dropped_frames_congestion, - u.mesh.mshstats.dropped_frames_congestion, DEC); + u.mesh.mshstats.dropped_frames_congestion, DEC); IEEE80211_IF_FILE(dropped_frames_no_route, - u.mesh.mshstats.dropped_frames_no_route, DEC); + u.mesh.mshstats.dropped_frames_no_route, DEC); IEEE80211_IF_FILE(estab_plinks, u.mesh.mshstats.estab_plinks, ATOMIC); /* Mesh parameters */ IEEE80211_IF_FILE(dot11MeshMaxRetries, - u.mesh.mshcfg.dot11MeshMaxRetries, DEC); + u.mesh.mshcfg.dot11MeshMaxRetries, DEC); IEEE80211_IF_FILE(dot11MeshRetryTimeout, - u.mesh.mshcfg.dot11MeshRetryTimeout, DEC); + u.mesh.mshcfg.dot11MeshRetryTimeout, DEC); IEEE80211_IF_FILE(dot11MeshConfirmTimeout, - u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC); + u.mesh.mshcfg.dot11MeshConfirmTimeout, DEC); IEEE80211_IF_FILE(dot11MeshHoldingTimeout, - u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC); + u.mesh.mshcfg.dot11MeshHoldingTimeout, DEC); IEEE80211_IF_FILE(dot11MeshTTL, u.mesh.mshcfg.dot11MeshTTL, DEC); IEEE80211_IF_FILE(element_ttl, u.mesh.mshcfg.element_ttl, DEC); IEEE80211_IF_FILE(auto_open_plinks, u.mesh.mshcfg.auto_open_plinks, DEC); IEEE80211_IF_FILE(dot11MeshMaxPeerLinks, - u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC); + u.mesh.mshcfg.dot11MeshMaxPeerLinks, DEC); IEEE80211_IF_FILE(dot11MeshHWMPactivePathTimeout, - u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC); + u.mesh.mshcfg.dot11MeshHWMPactivePathTimeout, DEC); IEEE80211_IF_FILE(dot11MeshHWMPpreqMinInterval, - u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC); + u.mesh.mshcfg.dot11MeshHWMPpreqMinInterval, DEC); IEEE80211_IF_FILE(dot11MeshHWMPperrMinInterval, - u.mesh.mshcfg.dot11MeshHWMPperrMinInterval, DEC); + u.mesh.mshcfg.dot11MeshHWMPperrMinInterval, DEC); IEEE80211_IF_FILE(dot11MeshHWMPnetDiameterTraversalTime, - u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC); + u.mesh.mshcfg.dot11MeshHWMPnetDiameterTraversalTime, DEC); IEEE80211_IF_FILE(dot11MeshHWMPmaxPREQretries, - u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC); + u.mesh.mshcfg.dot11MeshHWMPmaxPREQretries, DEC); IEEE80211_IF_FILE(path_refresh_time, - u.mesh.mshcfg.path_refresh_time, DEC); + u.mesh.mshcfg.path_refresh_time, DEC); IEEE80211_IF_FILE(min_discovery_timeout, - u.mesh.mshcfg.min_discovery_timeout, DEC); + u.mesh.mshcfg.min_discovery_timeout, DEC); IEEE80211_IF_FILE(dot11MeshHWMPRootMode, - u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC); + u.mesh.mshcfg.dot11MeshHWMPRootMode, DEC); IEEE80211_IF_FILE(dot11MeshGateAnnouncementProtocol, - u.mesh.mshcfg.dot11MeshGateAnnouncementProtocol, DEC); + u.mesh.mshcfg.dot11MeshGateAnnouncementProtocol, DEC); IEEE80211_IF_FILE(dot11MeshHWMPRannInterval, - u.mesh.mshcfg.dot11MeshHWMPRannInterval, DEC); + u.mesh.mshcfg.dot11MeshHWMPRannInterval, DEC); IEEE80211_IF_FILE(dot11MeshForwarding, u.mesh.mshcfg.dot11MeshForwarding, DEC); IEEE80211_IF_FILE(rssi_threshold, u.mesh.mshcfg.rssi_threshold, DEC); IEEE80211_IF_FILE(ht_opmode, u.mesh.mshcfg.ht_opmode, DEC); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7ae54b8..dd94ee5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -115,7 +115,7 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_STA_VLAN] = { .type = NLA_U32 }, [NL80211_ATTR_MNTR_FLAGS] = { /* NLA_NESTED can't be empty */ }, [NL80211_ATTR_MESH_ID] = { .type = NLA_BINARY, - .len = IEEE80211_MAX_MESH_ID_LEN }, + .len = IEEE80211_MAX_MESH_ID_LEN }, [NL80211_ATTR_MPATH_NEXT_HOP] = { .type = NLA_U32 }, [NL80211_ATTR_REG_ALPHA2] = { .type = NLA_STRING, .len = 2 }, @@ -3492,7 +3492,6 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_ELEMENT_TTL] = { .type = NLA_U8 }, [NL80211_MESHCONF_AUTO_OPEN_PLINKS] = { .type = NLA_U8 }, [NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR] = { .type = NLA_U32 }, - [NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES] = { .type = NLA_U8 }, [NL80211_MESHCONF_PATH_REFRESH_TIME] = { .type = NLA_U32 }, [NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT] = { .type = NLA_U16 }, @@ -3504,8 +3503,8 @@ static const struct nla_policy nl80211_meshconf_params_policy[NL80211_MESHCONF_A [NL80211_MESHCONF_HWMP_RANN_INTERVAL] = { .type = NLA_U16 }, [NL80211_MESHCONF_GATE_ANNOUNCEMENTS] = { .type = NLA_U8 }, [NL80211_MESHCONF_FORWARDING] = { .type = NLA_U8 }, - [NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32}, - [NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16}, + [NL80211_MESHCONF_RSSI_THRESHOLD] = { .type = NLA_U32 }, + [NL80211_MESHCONF_HT_OPMODE] = { .type = NLA_U16 }, }; static const struct nla_policy @@ -3515,7 +3514,7 @@ static const struct nla_policy [NL80211_MESH_SETUP_ENABLE_VENDOR_METRIC] = { .type = NLA_U8 }, [NL80211_MESH_SETUP_USERSPACE_AUTH] = { .type = NLA_FLAG }, [NL80211_MESH_SETUP_IE] = { .type = NLA_BINARY, - .len = IEEE80211_MAX_DATA_LEN }, + .len = IEEE80211_MAX_DATA_LEN }, [NL80211_MESH_SETUP_USERSPACE_AMPE] = { .type = NLA_FLAG }, }; @@ -3548,63 +3547,71 @@ do {\ /* Fill in the params struct */ FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshRetryTimeout, - mask, NL80211_MESHCONF_RETRY_TIMEOUT, nla_get_u16); + mask, NL80211_MESHCONF_RETRY_TIMEOUT, + nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshConfirmTimeout, - mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, nla_get_u16); + mask, NL80211_MESHCONF_CONFIRM_TIMEOUT, + nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHoldingTimeout, - mask, NL80211_MESHCONF_HOLDING_TIMEOUT, nla_get_u16); + mask, NL80211_MESHCONF_HOLDING_TIMEOUT, + nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxPeerLinks, - mask, NL80211_MESHCONF_MAX_PEER_LINKS, nla_get_u16); + mask, NL80211_MESHCONF_MAX_PEER_LINKS, + nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshMaxRetries, - mask, NL80211_MESHCONF_MAX_RETRIES, nla_get_u8); + mask, NL80211_MESHCONF_MAX_RETRIES, + nla_get_u8); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshTTL, - mask, NL80211_MESHCONF_TTL, nla_get_u8); + mask, NL80211_MESHCONF_TTL, nla_get_u8); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, element_ttl, - mask, NL80211_MESHCONF_ELEMENT_TTL, nla_get_u8); + mask, NL80211_MESHCONF_ELEMENT_TTL, + nla_get_u8); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, auto_open_plinks, - mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, nla_get_u8); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, - mask, NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, - nla_get_u32); + mask, NL80211_MESHCONF_AUTO_OPEN_PLINKS, + nla_get_u8); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshNbrOffsetMaxNeighbor, mask, + NL80211_MESHCONF_SYNC_OFFSET_MAX_NEIGHBOR, + nla_get_u32); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPmaxPREQretries, - mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, - nla_get_u8); + mask, NL80211_MESHCONF_HWMP_MAX_PREQ_RETRIES, + nla_get_u8); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, path_refresh_time, - mask, NL80211_MESHCONF_PATH_REFRESH_TIME, nla_get_u32); + mask, NL80211_MESHCONF_PATH_REFRESH_TIME, + nla_get_u32); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, min_discovery_timeout, - mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, - nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, - mask, NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, - nla_get_u32); + mask, NL80211_MESHCONF_MIN_DISCOVERY_TIMEOUT, + nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPactivePathTimeout, mask, + NL80211_MESHCONF_HWMP_ACTIVE_PATH_TIMEOUT, + nla_get_u32); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPpreqMinInterval, - mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, - nla_get_u16); + mask, NL80211_MESHCONF_HWMP_PREQ_MIN_INTERVAL, + nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPperrMinInterval, - mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, - nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshHWMPnetDiameterTraversalTime, - mask, NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, - nla_get_u16); - FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshHWMPRootMode, mask, - NL80211_MESHCONF_HWMP_ROOTMODE, - nla_get_u8); + mask, NL80211_MESHCONF_HWMP_PERR_MIN_INTERVAL, + nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshHWMPRannInterval, mask, - NL80211_MESHCONF_HWMP_RANN_INTERVAL, - nla_get_u16); + dot11MeshHWMPnetDiameterTraversalTime, mask, + NL80211_MESHCONF_HWMP_NET_DIAM_TRVS_TIME, + nla_get_u16); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRootMode, mask, + NL80211_MESHCONF_HWMP_ROOTMODE, nla_get_u8); + FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshHWMPRannInterval, mask, + NL80211_MESHCONF_HWMP_RANN_INTERVAL, + nla_get_u16); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, - dot11MeshGateAnnouncementProtocol, mask, - NL80211_MESHCONF_GATE_ANNOUNCEMENTS, - nla_get_u8); + dot11MeshGateAnnouncementProtocol, mask, + NL80211_MESHCONF_GATE_ANNOUNCEMENTS, + nla_get_u8); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, dot11MeshForwarding, - mask, NL80211_MESHCONF_FORWARDING, nla_get_u8); + mask, NL80211_MESHCONF_FORWARDING, + nla_get_u8); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, rssi_threshold, - mask, NL80211_MESHCONF_RSSI_THRESHOLD, nla_get_u32); + mask, NL80211_MESHCONF_RSSI_THRESHOLD, + nla_get_u32); FILL_IN_MESH_PARAM_IF_SET(tb, cfg, ht_opmode, - mask, NL80211_MESHCONF_HT_OPMODE, nla_get_u16); + mask, NL80211_MESHCONF_HT_OPMODE, + nla_get_u16); if (mask_out) *mask_out = mask; -- cgit v0.10.2