From f0ed67ec607f6c4e99aa5bb0bd5ac184bcaa5908 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 12 Oct 2012 17:40:41 +0530 Subject: ath6kl: Fix a mismatch in power management debug message Power Save Enabled : REC_POWER - conserve power without sacrificing performance. Power Save Disabled : MAX_PERF_POWER - maximum performance at the expense of power. Hence fix the debug message. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 41dea0d..459d700 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1452,10 +1452,10 @@ static int ath6kl_cfg80211_set_power_mgmt(struct wiphy *wiphy, return -EIO; if (pmgmt) { - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: max perf\n", __func__); + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: rec power\n", __func__); mode.pwr_mode = REC_POWER; } else { - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: rec power\n", __func__); + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s: max perf\n", __func__); mode.pwr_mode = MAX_PERF_POWER; } -- cgit v0.10.2 From f5750c657a94bcc17cd2129368ff00085d475996 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 3 Nov 2012 21:30:25 +0100 Subject: drivers/net/wireless/ath/ath6kl/hif.c: drop if around WARN_ON Just use WARN_ON rather than an if containing only WARN_ON(1). A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // @@ expression e; @@ - if (e) WARN_ON(1); + WARN_ON(e); // Signed-off-by: Julia Lawall Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/hif.c b/drivers/net/wireless/ath/ath6kl/hif.c index a7a1ec4..a6b6144 100644 --- a/drivers/net/wireless/ath/ath6kl/hif.c +++ b/drivers/net/wireless/ath/ath6kl/hif.c @@ -339,8 +339,7 @@ static int ath6kl_hif_proc_err_intr(struct ath6kl_device *dev) status = hif_read_write_sync(dev->ar, ERROR_INT_STATUS_ADDRESS, reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); - if (status) - WARN_ON(1); + WARN_ON(status); return status; } @@ -384,8 +383,7 @@ static int ath6kl_hif_proc_cpu_intr(struct ath6kl_device *dev) status = hif_read_write_sync(dev->ar, CPU_INT_STATUS_ADDRESS, reg_buf, 4, HIF_WR_SYNC_BYTE_FIX); - if (status) - WARN_ON(1); + WARN_ON(status); return status; } -- cgit v0.10.2 From 050757da5d54d8e25dc06bfbd9179c7d0073137a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:21:41 +0530 Subject: ath6kl: Remove erroneous flag clearing WLAN_ENABLED is vif specific, not part of the driver's struct ath6kl. Proper clearing of this flag is already taken care in ath6kl_cleanup_vif. Cc: wei-jen jlin Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index f21fa32..828cfbf 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1801,8 +1801,6 @@ void ath6kl_stop_txrx(struct ath6kl *ar) "attempting to reset target on instance destroy\n"); ath6kl_reset_device(ar, ar->target_type, true, true); - clear_bit(WLAN_ENABLED, &ar->flag); - up(&ar->sem); } EXPORT_SYMBOL(ath6kl_stop_txrx); -- cgit v0.10.2 From 895dc3867705f7622977c8870771e15881b3e421 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:03 +0530 Subject: ath6kl: Use standard way to assign the boolean variable Assign 'true' to the bool variable instead of needless typecasting. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index ba6bd49..575e7d7 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -1184,7 +1184,7 @@ static void reset_endpoint_states(struct htc_target *target) INIT_LIST_HEAD(&ep->pipe.tx_lookup_queue); INIT_LIST_HEAD(&ep->rx_bufq); ep->target = target; - ep->pipe.tx_credit_flow_enabled = (bool) 1; /* FIXME */ + ep->pipe.tx_credit_flow_enabled = true; } } -- cgit v0.10.2 From e16ccfeefbba6a268d00eb04145a172ad6e51cd8 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:22 +0530 Subject: ath6kl: remove unnecessary check for NULL skb dev_kfree_skb kernel API itself takes for checking for NULL skb, so an explicit check is not required. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index 575e7d7..73a38f9 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -509,9 +509,7 @@ static void destroy_htc_txctrl_packet(struct htc_packet *packet) { struct sk_buff *skb; skb = packet->skb; - if (skb != NULL) - dev_kfree_skb(skb); - + dev_kfree_skb(skb); kfree(packet); } @@ -1054,6 +1052,7 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, dev_kfree_skb(skb); skb = NULL; + goto free_skb; } @@ -1089,8 +1088,7 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, skb = NULL; free_skb: - if (skb != NULL) - dev_kfree_skb(skb); + dev_kfree_skb(skb); return status; diff --git a/drivers/net/wireless/ath/ath6kl/usb.c b/drivers/net/wireless/ath/ath6kl/usb.c index 62bcc0d..5fcd342 100644 --- a/drivers/net/wireless/ath/ath6kl/usb.c +++ b/drivers/net/wireless/ath/ath6kl/usb.c @@ -159,10 +159,8 @@ static void ath6kl_usb_free_urb_to_pipe(struct ath6kl_usb_pipe *pipe, static void ath6kl_usb_cleanup_recv_urb(struct ath6kl_urb_context *urb_context) { - if (urb_context->skb != NULL) { - dev_kfree_skb(urb_context->skb); - urb_context->skb = NULL; - } + dev_kfree_skb(urb_context->skb); + urb_context->skb = NULL; ath6kl_usb_free_urb_to_pipe(urb_context->pipe, urb_context); } diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 55ccf97..f4ef6a7 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -2481,16 +2481,11 @@ static int ath6kl_wmi_sync_point(struct wmi *wmi, u8 if_idx) free_cmd_skb: /* free up any resources left over (possibly due to an error) */ - if (skb) - dev_kfree_skb(skb); + dev_kfree_skb(skb); free_data_skb: - for (index = 0; index < num_pri_streams; index++) { - if (data_sync_bufs[index].skb != NULL) { - dev_kfree_skb((struct sk_buff *)data_sync_bufs[index]. - skb); - } - } + for (index = 0; index < num_pri_streams; index++) + dev_kfree_skb((struct sk_buff *)data_sync_bufs[index].skb); return ret; } -- cgit v0.10.2 From de2070fc4aa7c0205348010f500f5abce012e67b Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:40 +0530 Subject: ath6kl: Fix kernel panic on continuous driver load/unload On continuous loading and unloading of AR6004 ath6kl USB driver it triggers a panic due to NULL pointer dereference of 'target' pointer. while true; do sudo modprobe -v ath6kl_core; sudo modprobe -v ath6kl_usb; sudo modprobe -r usb; sudo modprobe -r ath6kl_core; done ar->htc_target can be NULL due to a race condition that can occur during driver initialization(we do 'ath6kl_hif_power_on' before initializing 'ar->htc_target' via 'ath6kl_htc_create'). 'ath6kl_hif_power_on' assigns 'ath6kl_recv_complete' as usb_complete_t/callback function for 'usb_fill_bulk_urb'. Thus the possibility of ar->htc_target being NULL via ath6kl_recv_complete -> ath6kl_usb_io_comp_work before even 'ath6kl_htc_create' is finished to initialize ar->htc_create. Worth noting is the obvious solution of doing 'ath6kl_hif_power_on' later(i.e after we are done with 'ath6kl_htc_create', causes a h/w bring up failure in AR6003 SDIO, as 'ath6kl_hif_power_on' is a pre-requisite to get the target version 'ath6kl_bmi_get_target_info'. So simply check for NULL pointer for 'ar->htc_target' and bail out. [23614.518282] BUG: unable to handle kernel NULL pointer dereference at 00000904 [23614.518463] IP: [] __ticket_spin_trylock+0x6/0x30 [23614.518570] *pde = 00000000 [23614.518664] Oops: 0000 [#1] SMP [23614.518795] Modules linked in: ath6kl_usb(O+) ath6kl_core(O) [23614.520012] EIP: 0060:[] EFLAGS: 00010286 CPU: 0 [23614.520012] EIP is at __ticket_spin_trylock+0x6/0x30 Call Trace: [] do_raw_spin_trylock+0x14/0x40 [] _raw_spin_lock_bh+0x52/0x80 [] ? ath6kl_htc_pipe_rx_complete+0x3b4/0x4c0 [ath6kl_core] [] ath6kl_htc_pipe_rx_complete+0x3b4/0x4c0 [ath6kl_core] [] ? skb_dequeue+0x22/0x70 [] ? skb_dequeue+0x22/0x70 [] ath6kl_core_rx_complete+0x12/0x20 [ath6kl_core] [] ath6kl_usb_io_comp_work+0xaa/0xb0 [ath6kl_usb] [] process_one_work+0x1a3/0x5e0 [] ? process_one_work+0x127/0x5e0 [] ? ath6kl_usb_reset_resume+0x30/0x30 [ath6kl_usb] [] worker_thread+0x11e/0x3f0 Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/htc_pipe.c b/drivers/net/wireless/ath/ath6kl/htc_pipe.c index 73a38f9..2813901 100644 --- a/drivers/net/wireless/ath/ath6kl/htc_pipe.c +++ b/drivers/net/wireless/ath/ath6kl/htc_pipe.c @@ -967,6 +967,22 @@ static int ath6kl_htc_pipe_rx_complete(struct ath6kl *ar, struct sk_buff *skb, u16 payload_len; int status = 0; + /* + * ar->htc_target can be NULL due to a race condition that can occur + * during driver initialization(we do 'ath6kl_hif_power_on' before + * initializing 'ar->htc_target' via 'ath6kl_htc_create'). + * 'ath6kl_hif_power_on' assigns 'ath6kl_recv_complete' as + * usb_complete_t/callback function for 'usb_fill_bulk_urb'. + * Thus the possibility of ar->htc_target being NULL + * via ath6kl_recv_complete -> ath6kl_usb_io_comp_work. + */ + if (WARN_ON_ONCE(!target)) { + ath6kl_err("Target not yet initialized\n"); + status = -EINVAL; + goto free_skb; + } + + netdata = skb->data; netlen = skb->len; -- cgit v0.10.2 From 8aa659d2c9ad2df8873c5ba1d7f030d6acf39c4c Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:22:57 +0530 Subject: ath6kl: trivial cleanup on interface type selection a minor cleanup in assigning the driver specific network type based on interface type. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 459d700..cea8856 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -1557,17 +1557,13 @@ static int ath6kl_cfg80211_change_iface(struct wiphy *wiphy, set_iface_type: switch (type) { case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_CLIENT: vif->next_mode = INFRA_NETWORK; break; case NL80211_IFTYPE_ADHOC: vif->next_mode = ADHOC_NETWORK; break; case NL80211_IFTYPE_AP: - vif->next_mode = AP_NETWORK; - break; - case NL80211_IFTYPE_P2P_CLIENT: - vif->next_mode = INFRA_NETWORK; - break; case NL80211_IFTYPE_P2P_GO: vif->next_mode = AP_NETWORK; break; -- cgit v0.10.2 From eb922e4b41fd315f4ef95fef0ca1051b61cd5538 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:23:15 +0530 Subject: ath6kl: Parse beacon interval from userspace Parse beacon interval from userspace to firmware. Incase the firmware does not supports it, just print a warning message and continue with AP settings. Cc: Sumathi Mandipati Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index cea8856..f253d66 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -2770,9 +2770,11 @@ static int ath6kl_start_ap(struct wiphy *wiphy, struct net_device *dev, ar->ap_mode_bkey.valid = false; - /* TODO: - * info->interval - */ + ret = ath6kl_wmi_ap_set_beacon_intvl_cmd(ar->wmi, vif->fw_vif_idx, + info->beacon_interval); + + if (ret) + ath6kl_warn("Failed to set beacon interval: %d\n", ret); ret = ath6kl_wmi_ap_set_dtim_cmd(ar->wmi, vif->fw_vif_idx, info->dtim_period); diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index f4ef6a7..a0503c2 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -752,6 +752,23 @@ int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid) NO_SYNC_WMIFLAG); } +int ath6kl_wmi_ap_set_beacon_intvl_cmd(struct wmi *wmi, u8 if_idx, + u32 beacon_intvl) +{ + struct sk_buff *skb; + struct set_beacon_int_cmd *cmd; + + skb = ath6kl_wmi_get_new_buf(sizeof(*cmd)); + if (!skb) + return -ENOMEM; + + cmd = (struct set_beacon_int_cmd *) skb->data; + + cmd->beacon_intvl = cpu_to_le32(beacon_intvl); + return ath6kl_wmi_cmd_send(wmi, if_idx, skb, + WMI_SET_BEACON_INT_CMDID, NO_SYNC_WMIFLAG); +} + int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period) { struct sk_buff *skb; diff --git a/drivers/net/wireless/ath/ath6kl/wmi.h b/drivers/net/wireless/ath/ath6kl/wmi.h index 98b1755..b5f2265 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.h +++ b/drivers/net/wireless/ath/ath6kl/wmi.h @@ -1660,6 +1660,10 @@ struct roam_ctrl_cmd { u8 roam_ctrl; } __packed; +struct set_beacon_int_cmd { + __le32 beacon_intvl; +} __packed; + struct set_dtim_cmd { __le32 dtim_period; } __packed; @@ -2649,6 +2653,8 @@ int ath6kl_wmi_del_wow_pattern_cmd(struct wmi *wmi, u8 if_idx, int ath6kl_wmi_set_rssi_filter_cmd(struct wmi *wmi, u8 if_idx, s8 rssi); int ath6kl_wmi_set_roam_lrssi_cmd(struct wmi *wmi, u8 lrssi); int ath6kl_wmi_ap_set_dtim_cmd(struct wmi *wmi, u8 if_idx, u32 dtim_period); +int ath6kl_wmi_ap_set_beacon_intvl_cmd(struct wmi *wmi, u8 if_idx, + u32 beacon_interval); int ath6kl_wmi_force_roam_cmd(struct wmi *wmi, const u8 *bssid); int ath6kl_wmi_set_roam_mode_cmd(struct wmi *wmi, enum wmi_roam_mode mode); int ath6kl_wmi_mcast_filter_cmd(struct wmi *wmi, u8 if_idx, bool mc_all_on); -- cgit v0.10.2 From 355b3a982095c8647cce13dd43ebc4bc4299f31a Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:23:36 +0530 Subject: ath6kl: Move and rename ath6kl_cleanup_vif function Rename ath6kl_cleanup_vif function as 'ath6kl_cfg80211_vif_stop' which is the more appropriate name considering the functionality of the module and vif specific cleanup is actually done by ath6kl_cfg80211_vif_cleanup. Also move it to cfg80211.c. Also make ath6kl_cfg80211_sta_bmiss_enhance as static function. This addresses a FIXME/TODO. Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index f253d66..e978316 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -427,6 +427,30 @@ static bool ath6kl_is_tx_pending(struct ath6kl *ar) return ar->tx_pending[ath6kl_wmi_get_control_ep(ar->wmi)] == 0; } +static void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, + bool enable) +{ + int err; + + if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) + return; + + if (vif->nw_type != INFRA_NETWORK) + return; + + if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, + vif->ar->fw_capabilities)) + return; + + ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", + enable ? "enable" : "disable"); + + err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, + vif->fw_vif_idx, enable); + if (err) + ath6kl_err("failed to %s enhanced bmiss detection: %d\n", + enable ? "enable" : "disable", err); +} static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, struct cfg80211_connect_params *sme) @@ -1507,7 +1531,7 @@ static int ath6kl_cfg80211_del_iface(struct wiphy *wiphy, list_del(&vif->list); spin_unlock_bh(&ar->list_lock); - ath6kl_cleanup_vif(vif, test_bit(WMI_READY, &ar->flag)); + ath6kl_cfg80211_vif_stop(vif, test_bit(WMI_READY, &ar->flag)); ath6kl_cfg80211_vif_cleanup(vif); @@ -2667,30 +2691,6 @@ static int ath6kl_set_ies(struct ath6kl_vif *vif, return 0; } -void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable) -{ - int err; - - if (WARN_ON(!test_bit(WMI_READY, &vif->ar->flag))) - return; - - if (vif->nw_type != INFRA_NETWORK) - return; - - if (!test_bit(ATH6KL_FW_CAPABILITY_BMISS_ENHANCE, - vif->ar->fw_capabilities)) - return; - - ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "%s fw bmiss enhance\n", - enable ? "enable" : "disable"); - - err = ath6kl_wmi_sta_bmiss_enhance_cmd(vif->ar->wmi, - vif->fw_vif_idx, enable); - if (err) - ath6kl_err("failed to %s enhanced bmiss detection: %d\n", - enable ? "enable" : "disable", err); -} - static int ath6kl_get_rsn_capab(struct cfg80211_beacon_data *beacon, u8 *rsn_capab) { @@ -3561,6 +3561,37 @@ static int ath6kl_cfg80211_vif_init(struct ath6kl_vif *vif) return 0; } +void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready) +{ + static u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; + bool discon_issued; + + netif_stop_queue(vif->ndev); + + clear_bit(WLAN_ENABLED, &vif->flags); + + if (wmi_ready) { + discon_issued = test_bit(CONNECTED, &vif->flags) || + test_bit(CONNECT_PEND, &vif->flags); + ath6kl_disconnect(vif); + del_timer(&vif->disconnect_timer); + + if (discon_issued) + ath6kl_disconnect_event(vif, DISCONNECT_CMD, + (vif->nw_type & AP_NETWORK) ? + bcast_mac : vif->bssid, + 0, NULL, 0); + } + + if (vif->scan_req) { + cfg80211_scan_done(vif->scan_req, true); + vif->scan_req = NULL; + } + + /* need to clean up enhanced bmiss detection fw state */ + ath6kl_cfg80211_sta_bmiss_enhance(vif, false); +} + void ath6kl_cfg80211_vif_cleanup(struct ath6kl_vif *vif) { struct ath6kl *ar = vif->ar; diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.h b/drivers/net/wireless/ath/ath6kl/cfg80211.h index e5e70f3..b59becd 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.h +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.h @@ -61,7 +61,5 @@ void ath6kl_cfg80211_cleanup(struct ath6kl *ar); struct ath6kl *ath6kl_cfg80211_create(void); void ath6kl_cfg80211_destroy(struct ath6kl *ar); -/* TODO: remove this once ath6kl_vif_cleanup() is moved to cfg80211.c */ -void ath6kl_cfg80211_sta_bmiss_enhance(struct ath6kl_vif *vif, bool enable); #endif /* ATH6KL_CFG80211_H */ diff --git a/drivers/net/wireless/ath/ath6kl/core.h b/drivers/net/wireless/ath/ath6kl/core.h index 189d8fa..61b2f98 100644 --- a/drivers/net/wireless/ath/ath6kl/core.h +++ b/drivers/net/wireless/ath/ath6kl/core.h @@ -940,7 +940,7 @@ void ath6kl_reset_device(struct ath6kl *ar, u32 target_type, bool wait_fot_compltn, bool cold_reset); void ath6kl_init_control_info(struct ath6kl_vif *vif); struct ath6kl_vif *ath6kl_vif_first(struct ath6kl *ar); -void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready); +void ath6kl_cfg80211_vif_stop(struct ath6kl_vif *vif, bool wmi_ready); int ath6kl_init_hw_start(struct ath6kl *ar); int ath6kl_init_hw_stop(struct ath6kl *ar); int ath6kl_init_fetch_firmwares(struct ath6kl *ar); diff --git a/drivers/net/wireless/ath/ath6kl/init.c b/drivers/net/wireless/ath/ath6kl/init.c index 828cfbf..5d434cf 100644 --- a/drivers/net/wireless/ath/ath6kl/init.c +++ b/drivers/net/wireless/ath/ath6kl/init.c @@ -1715,38 +1715,6 @@ void ath6kl_init_hw_restart(struct ath6kl *ar) } } -/* FIXME: move this to cfg80211.c and rename to ath6kl_cfg80211_vif_stop() */ -void ath6kl_cleanup_vif(struct ath6kl_vif *vif, bool wmi_ready) -{ - static u8 bcast_mac[] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; - bool discon_issued; - - netif_stop_queue(vif->ndev); - - clear_bit(WLAN_ENABLED, &vif->flags); - - if (wmi_ready) { - discon_issued = test_bit(CONNECTED, &vif->flags) || - test_bit(CONNECT_PEND, &vif->flags); - ath6kl_disconnect(vif); - del_timer(&vif->disconnect_timer); - - if (discon_issued) - ath6kl_disconnect_event(vif, DISCONNECT_CMD, - (vif->nw_type & AP_NETWORK) ? - bcast_mac : vif->bssid, - 0, NULL, 0); - } - - if (vif->scan_req) { - cfg80211_scan_done(vif->scan_req, true); - vif->scan_req = NULL; - } - - /* need to clean up enhanced bmiss detection fw state */ - ath6kl_cfg80211_sta_bmiss_enhance(vif, false); -} - void ath6kl_stop_txrx(struct ath6kl *ar) { struct ath6kl_vif *vif, *tmp_vif; @@ -1766,7 +1734,7 @@ void ath6kl_stop_txrx(struct ath6kl *ar) list_for_each_entry_safe(vif, tmp_vif, &ar->vif_list, list) { list_del(&vif->list); spin_unlock_bh(&ar->list_lock); - ath6kl_cleanup_vif(vif, test_bit(WMI_READY, &ar->flag)); + ath6kl_cfg80211_vif_stop(vif, test_bit(WMI_READY, &ar->flag)); rtnl_lock(); ath6kl_cfg80211_vif_cleanup(vif); rtnl_unlock(); -- cgit v0.10.2 From 6f7c1adb7529935df6e288a1436003c1f6dc0653 Mon Sep 17 00:00:00 2001 From: Mohammed Shafi Shajakhan Date: Fri, 16 Nov 2012 18:24:37 +0530 Subject: ath6kl: minor optimization using if, else if Signed-off-by: Mohammed Shafi Shajakhan Signed-off-by: Kalle Valo diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index e978316..ac0761c 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -640,13 +640,13 @@ static int ath6kl_cfg80211_connect(struct wiphy *wiphy, struct net_device *dev, vif->req_bssid, vif->ch_hint, ar->connect_ctrl_flags, nw_subtype); - /* disable background scan if period is 0 */ - if (sme->bg_scan_period == 0) + if (sme->bg_scan_period == 0) { + /* disable background scan if period is 0 */ sme->bg_scan_period = 0xffff; - - /* configure default value if not specified */ - if (sme->bg_scan_period == -1) + } else if (sme->bg_scan_period == -1) { + /* configure default value if not specified */ sme->bg_scan_period = DEFAULT_BG_SCAN_PERIOD; + } ath6kl_wmi_scanparams_cmd(ar->wmi, vif->fw_vif_idx, 0, 0, sme->bg_scan_period, 0, 0, 0, 3, 0, 0, 0); -- cgit v0.10.2 From ae023b2795d36f0f077e157428eb7eafa29ee412 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Mon, 21 Jan 2013 13:12:57 +0200 Subject: Revert "iwlwifi: fix the reclaimed packet tracking upon flush queue" This reverts commit f590dcec944552f9a4a61155810f3abd17d6465d which has been reported to cause issues. See https://lkml.org/lkml/2013/1/20/4 for further details. Cc: stable@vger.kernel.org [3.7] Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/tx.c b/drivers/net/wireless/iwlwifi/dvm/tx.c index 31534f7..2797964 100644 --- a/drivers/net/wireless/iwlwifi/dvm/tx.c +++ b/drivers/net/wireless/iwlwifi/dvm/tx.c @@ -1153,6 +1153,13 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, next_reclaimed = ssn; } + if (tid != IWL_TID_NON_QOS) { + priv->tid_data[sta_id][tid].next_reclaimed = + next_reclaimed; + IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n", + next_reclaimed); + } + iwl_trans_reclaim(priv->trans, txq_id, ssn, &skbs); iwlagn_check_ratid_empty(priv, sta_id, tid); @@ -1203,28 +1210,11 @@ int iwlagn_rx_reply_tx(struct iwl_priv *priv, struct iwl_rx_cmd_buffer *rxb, if (!is_agg) iwlagn_non_agg_tx_status(priv, ctx, hdr->addr1); - /* - * W/A for FW bug - the seq_ctl isn't updated when the - * queues are flushed. Fetch it from the packet itself - */ - if (!is_agg && status == TX_STATUS_FAIL_FIFO_FLUSHED) { - next_reclaimed = le16_to_cpu(hdr->seq_ctrl); - next_reclaimed = - SEQ_TO_SN(next_reclaimed + 0x10); - } - is_offchannel_skb = (info->flags & IEEE80211_TX_CTL_TX_OFFCHAN); freed++; } - if (tid != IWL_TID_NON_QOS) { - priv->tid_data[sta_id][tid].next_reclaimed = - next_reclaimed; - IWL_DEBUG_TX_REPLY(priv, "Next reclaimed packet:%d\n", - next_reclaimed); - } - WARN_ON(!is_agg && freed != 1); /* -- cgit v0.10.2 From c49dc9008b1c641a86837297df7c90cef070571b Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 24 Jan 2013 09:40:00 +0300 Subject: cfg80211: off by one in ieee80211_bss() We do a: sprintf(buf, " Last beacon: %ums ago", elapsed_jiffies_msecs(bss->ts)); elapsed_jiffies_msecs() can return a 10 digit number so "buf" needs to be 31 characters long. Signed-off-by: Dan Carpenter Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 01592d7..45f1618 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1358,7 +1358,7 @@ ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, &iwe, IW_EV_UINT_LEN); } - buf = kmalloc(30, GFP_ATOMIC); + buf = kmalloc(31, GFP_ATOMIC); if (buf) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; -- cgit v0.10.2 From 0e33e48ddc4402e890aaeeeacc95f730bf522098 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Tue, 22 Jan 2013 22:47:40 +0100 Subject: brcmsmac: fix tx status processing This issue was reported on the wireless list (see [1]) in which brcmsmac ran into a fatal error: [ 588.284074] brcmsmac bcma0:0: frameid != txh->TxFrameID [ 588.284098] brcmsmac bcma0:0: MI_TFS: fatal [ 588.284103] brcmsmac bcma0:0: wl0: fatal error, reinitializing [ 588.286208] ieee80211 phy0: Hardware restart was requested The tx status feedback is processed in a loop limiting the number of frames processed in one run. The code terminate processing when the limit is reached regardless the txstatus value read from the device register. When that status is is flagged as being valid it must be processed as the hardware will clear it after is has been read. Bisecting was done by Seth Forshee and showed following commit as the culprit: commit 57fe504817ccec9b6ac23e973d2925343bf1e3b6 Author: Piotr Haber Date: Wed Nov 28 21:44:07 2012 +0100 brcmsmac: fix bounds checking in tx/rx [1] http://www.spinics.net/lists/linux-wireless/msg101293.html Reported-by: Linus Torvalds Tested-by: Seth Forshee Reviewed-by: Hante Meuleman Reviewed-by: Pieter-Paul Giesberts Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 17594de..9f3d7e9 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -1027,7 +1027,6 @@ brcms_c_dotxstatus(struct brcms_c_info *wlc, struct tx_status *txs) static bool brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal) { - bool morepending = false; struct bcma_device *core; struct tx_status txstatus, *txs; u32 s1, s2; @@ -1041,23 +1040,20 @@ brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal) txs = &txstatus; core = wlc_hw->d11core; *fatal = false; - s1 = bcma_read32(core, D11REGOFFS(frmtxstatus)); - while (!(*fatal) - && (s1 & TXS_V)) { - /* !give others some time to run! */ - if (n >= max_tx_num) { - morepending = true; - break; - } + while (n < max_tx_num) { + s1 = bcma_read32(core, D11REGOFFS(frmtxstatus)); if (s1 == 0xffffffff) { brcms_err(core, "wl%d: %s: dead chip\n", wlc_hw->unit, __func__); *fatal = true; return false; } - s2 = bcma_read32(core, D11REGOFFS(frmtxstatus2)); + /* only process when valid */ + if (!(s1 & TXS_V)) + break; + s2 = bcma_read32(core, D11REGOFFS(frmtxstatus2)); txs->status = s1 & TXS_STATUS_MASK; txs->frameid = (s1 & TXS_FID_MASK) >> TXS_FID_SHIFT; txs->sequence = s2 & TXS_SEQ_MASK; @@ -1065,15 +1061,12 @@ brcms_b_txstatus(struct brcms_hardware *wlc_hw, bool bound, bool *fatal) txs->lasttxtime = 0; *fatal = brcms_c_dotxstatus(wlc_hw->wlc, txs); - - s1 = bcma_read32(core, D11REGOFFS(frmtxstatus)); + if (*fatal == true) + return false; n++; } - if (*fatal) - return false; - - return morepending; + return n >= max_tx_num; } static void brcms_c_tbtt(struct brcms_c_info *wlc) -- cgit v0.10.2 From 6b112decb777884e37d308554e22e0a4f5cdf44f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= Date: Sun, 27 Jan 2013 14:30:29 +0100 Subject: bcma: fix NAND flash validation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Signed-off-by: Rafał Miłecki Signed-off-by: John W. Linville diff --git a/drivers/bcma/driver_chipcommon_nflash.c b/drivers/bcma/driver_chipcommon_nflash.c index dbda91e..1f0b83e 100644 --- a/drivers/bcma/driver_chipcommon_nflash.c +++ b/drivers/bcma/driver_chipcommon_nflash.c @@ -21,7 +21,7 @@ int bcma_nflash_init(struct bcma_drv_cc *cc) struct bcma_bus *bus = cc->core->bus; if (bus->chipinfo.id != BCMA_CHIP_ID_BCM4706 && - cc->core->id.rev != 0x38) { + cc->core->id.rev != 38) { bcma_err(bus, "NAND flash on unsupported board!\n"); return -ENOTSUPP; } -- cgit v0.10.2 From 0a06ad8e3a1cb5311b7dbafde45410aa1bce9d40 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sun, 27 Jan 2013 16:24:25 -0600 Subject: rtlwifi: Fix the usage of the wrong variable in usb.c In routine _rtl_rx_pre_process(), skb_dequeue() is called to get an skb; however, the wrong variable name is used in subsequent calls. Reported-by: Guenter Roeck Signed-off-by: Larry Finger Cc: Guenter Roeck Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/usb.c b/drivers/net/wireless/rtlwifi/usb.c index f2ecdeb..1535efd 100644 --- a/drivers/net/wireless/rtlwifi/usb.c +++ b/drivers/net/wireless/rtlwifi/usb.c @@ -542,8 +542,8 @@ static void _rtl_rx_pre_process(struct ieee80211_hw *hw, struct sk_buff *skb) WARN_ON(skb_queue_empty(&rx_queue)); while (!skb_queue_empty(&rx_queue)) { _skb = skb_dequeue(&rx_queue); - _rtl_usb_rx_process_agg(hw, skb); - ieee80211_rx_irqsafe(hw, skb); + _rtl_usb_rx_process_agg(hw, _skb); + ieee80211_rx_irqsafe(hw, _skb); } } -- cgit v0.10.2 From 8a7d7cbf7b5ff9912ef50b3e94c9ad9f37b1c75f Mon Sep 17 00:00:00 2001 From: Bing Zhao Date: Tue, 29 Jan 2013 14:38:02 -0800 Subject: mwifiex: fix incomplete scan in case of IE parsing error A scan request is split into multiple scan commands queued in scan_pending_q. Each scan command will be sent to firmware and its response is handlded one after another. If any error is detected while parsing IE in command response buffer the remaining data will be ignored and error is returned. We should check if there is any more scan commands pending in the queue before returning error. This ensures that we will call cfg80211_scan_done if this is the last scan command, or send next scan command in scan_pending_q to firmware. Cc: "3.6+" Signed-off-by: Bing Zhao Signed-off-by: Amitkumar Karwar Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 9189a32..973a9d9 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1563,7 +1563,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, dev_err(adapter->dev, "SCAN_RESP: too many AP returned (%d)\n", scan_rsp->number_of_sets); ret = -1; - goto done; + goto check_next_scan; } bytes_left = le16_to_cpu(scan_rsp->bss_descript_size); @@ -1634,7 +1634,8 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, if (!beacon_size || beacon_size > bytes_left) { bss_info += bytes_left; bytes_left = 0; - return -1; + ret = -1; + goto check_next_scan; } /* Initialize the current working beacon pointer for this BSS @@ -1690,7 +1691,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, dev_err(priv->adapter->dev, "%s: bytes left < IE length\n", __func__); - goto done; + goto check_next_scan; } if (element_id == WLAN_EID_DS_PARAMS) { channel = *(current_ptr + sizeof(struct ieee_types_header)); @@ -1753,6 +1754,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, } } +check_next_scan: spin_lock_irqsave(&adapter->scan_pending_q_lock, flags); if (list_empty(&adapter->scan_pending_q)) { spin_unlock_irqrestore(&adapter->scan_pending_q_lock, flags); @@ -1813,7 +1815,6 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, } } -done: return ret; } -- cgit v0.10.2 From 8cf9fa1240229cbdd888236c0c43fcbad680cf00 Mon Sep 17 00:00:00 2001 From: Johan Hedberg Date: Tue, 29 Jan 2013 10:44:23 -0600 Subject: Bluetooth: Fix handling of unexpected SMP PDUs The conn->smp_chan pointer can be NULL if SMP PDUs arrive at unexpected moments. To avoid NULL pointer dereferences the code should be checking for this and disconnect if an unexpected SMP PDU arrives. This patch fixes the issue by adding a check for conn->smp_chan for all other PDUs except pairing request and security request (which are are the first PDUs to come to initialize the SMP context). Signed-off-by: Johan Hedberg CC: stable@vger.kernel.org Acked-by: Marcel Holtmann Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/smp.c b/net/bluetooth/smp.c index 68a9587..5abefb1 100644 --- a/net/bluetooth/smp.c +++ b/net/bluetooth/smp.c @@ -859,6 +859,19 @@ int smp_sig_channel(struct l2cap_conn *conn, struct sk_buff *skb) skb_pull(skb, sizeof(code)); + /* + * The SMP context must be initialized for all other PDUs except + * pairing and security requests. If we get any other PDU when + * not initialized simply disconnect (done if this function + * returns an error). + */ + if (code != SMP_CMD_PAIRING_REQ && code != SMP_CMD_SECURITY_REQ && + !conn->smp_chan) { + BT_ERR("Unexpected SMP command 0x%02x. Disconnecting.", code); + kfree_skb(skb); + return -ENOTSUPP; + } + switch (code) { case SMP_CMD_PAIRING_REQ: reason = smp_cmd_pairing_req(conn, skb); -- cgit v0.10.2 From 4c02e2d444595200d0b18b889994aac3611cd288 Mon Sep 17 00:00:00 2001 From: Andre Guedes Date: Wed, 30 Jan 2013 11:50:55 -0300 Subject: Bluetooth: Fix hci_conn timeout routine If occurs a LE or SCO hci_conn timeout and the connection is already established (BT_CONNECTED state), the connection is not terminated as expected. This bug can be reproduced using l2test or scotest tool. Once the connection is established, kill l2test/scotest and the connection won't be terminated. This patch fixes hci_conn_disconnect helper so it is able to terminate LE and SCO connections, as well as ACL. Signed-off-by: Andre Guedes Signed-off-by: Gustavo Padovan diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 25bfce0..4925a02 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -249,12 +249,12 @@ static void hci_conn_disconnect(struct hci_conn *conn) __u8 reason = hci_proto_disconn_ind(conn); switch (conn->type) { - case ACL_LINK: - hci_acl_disconn(conn, reason); - break; case AMP_LINK: hci_amp_disconn(conn, reason); break; + default: + hci_acl_disconn(conn, reason); + break; } } -- cgit v0.10.2 From a5ffbe0a1993a27072742ef7db6cf9839956fce9 Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Sat, 2 Feb 2013 15:55:00 -0600 Subject: rtlwifi: Fix scheduling while atomic bug Kernel commits 41affd5 and 6539306 changed the locking in rtl_lps_leave() from a spinlock to a mutex by doing the calls indirectly from a work queue to reduce the time that interrupts were disabled. This change was fine for most systems; however a scheduling while atomic bug was reported in https://bugzilla.redhat.com/show_bug.cgi?id=903881. The backtrace indicates that routine rtl_is_special(), which calls rtl_lps_leave() in three places was entered in atomic context. These direct calls are replaced by putting a request on the appropriate work queue. Signed-off-by: Larry Finger Reported-and-tested-by: Nathaniel Doherty Cc: Nathaniel Doherty Cc: Stanislaw Gruszka Cc: Stable Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 4494d13..0f8b051 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -1004,7 +1004,8 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) is_tx ? "Tx" : "Rx"); if (is_tx) { - rtl_lps_leave(hw); + schedule_work(&rtlpriv-> + works.lps_leave_work); ppsc->last_delaylps_stamp_jiffies = jiffies; } @@ -1014,7 +1015,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) } } else if (ETH_P_ARP == ether_type) { if (is_tx) { - rtl_lps_leave(hw); + schedule_work(&rtlpriv->works.lps_leave_work); ppsc->last_delaylps_stamp_jiffies = jiffies; } @@ -1024,7 +1025,7 @@ u8 rtl_is_special_data(struct ieee80211_hw *hw, struct sk_buff *skb, u8 is_tx) "802.1X %s EAPOL pkt!!\n", is_tx ? "Tx" : "Rx"); if (is_tx) { - rtl_lps_leave(hw); + schedule_work(&rtlpriv->works.lps_leave_work); ppsc->last_delaylps_stamp_jiffies = jiffies; } -- cgit v0.10.2 From c50ae9470e542862f782e2d9c106270152bbf3ce Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 3 Feb 2013 23:25:33 +0100 Subject: bcma: unregister gpios before unloading bcma This patch unregisters the gpio chip before bcma gets unloaded. Signed-off-by: Hauke Mehrtens Reported-by: Piotr Haber Signed-off-by: John W. Linville diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h index 4a2d72e..966ce4d 100644 --- a/drivers/bcma/bcma_private.h +++ b/drivers/bcma/bcma_private.h @@ -94,11 +94,16 @@ void __devinit bcma_core_pci_hostmode_init(struct bcma_drv_pci *pc); #ifdef CONFIG_BCMA_DRIVER_GPIO /* driver_gpio.c */ int bcma_gpio_init(struct bcma_drv_cc *cc); +int bcma_gpio_unregister(struct bcma_drv_cc *cc); #else static inline int bcma_gpio_init(struct bcma_drv_cc *cc) { return -ENOTSUPP; } +static inline int bcma_gpio_unregister(struct bcma_drv_cc *cc) +{ + return 0; +} #endif /* CONFIG_BCMA_DRIVER_GPIO */ #endif diff --git a/drivers/bcma/driver_gpio.c b/drivers/bcma/driver_gpio.c index 9a6f585..71f755c 100644 --- a/drivers/bcma/driver_gpio.c +++ b/drivers/bcma/driver_gpio.c @@ -96,3 +96,8 @@ int bcma_gpio_init(struct bcma_drv_cc *cc) return gpiochip_add(chip); } + +int bcma_gpio_unregister(struct bcma_drv_cc *cc) +{ + return gpiochip_remove(&cc->gpio); +} diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c index 53ba20c..e08b9c6 100644 --- a/drivers/bcma/main.c +++ b/drivers/bcma/main.c @@ -268,6 +268,13 @@ int __devinit bcma_bus_register(struct bcma_bus *bus) void bcma_bus_unregister(struct bcma_bus *bus) { struct bcma_device *cores[3]; + int err; + + err = bcma_gpio_unregister(&bus->drv_cc); + if (err == -EBUSY) + bcma_err(bus, "Some GPIOs are still in use.\n"); + else if (err) + bcma_err(bus, "Can not unregister GPIO driver: %i\n", err); cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K); cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE); -- cgit v0.10.2 From 600485edaef65d89f5c44ce62baa7cac961cd50d Mon Sep 17 00:00:00 2001 From: Hauke Mehrtens Date: Sun, 3 Feb 2013 23:25:34 +0100 Subject: ssb: unregister gpios before unloading ssb This patch unregisters the gpio chip before ssb gets unloaded. Signed-off-by: Hauke Mehrtens Signed-off-by: John W. Linville diff --git a/drivers/ssb/driver_gpio.c b/drivers/ssb/driver_gpio.c index 97ac0a3..eb27530 100644 --- a/drivers/ssb/driver_gpio.c +++ b/drivers/ssb/driver_gpio.c @@ -174,3 +174,15 @@ int ssb_gpio_init(struct ssb_bus *bus) return -1; } + +int ssb_gpio_unregister(struct ssb_bus *bus) +{ + if (ssb_chipco_available(&bus->chipco) || + ssb_extif_available(&bus->extif)) { + return gpiochip_remove(&bus->gpio); + } else { + SSB_WARN_ON(1); + } + + return -1; +} diff --git a/drivers/ssb/main.c b/drivers/ssb/main.c index c82c5c9..7140c88 100644 --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c @@ -443,6 +443,15 @@ static void ssb_devices_unregister(struct ssb_bus *bus) void ssb_bus_unregister(struct ssb_bus *bus) { + int err; + + err = ssb_gpio_unregister(bus); + if (err == -EBUSY) + ssb_dprintk(KERN_ERR PFX "Some GPIOs are still in use.\n"); + else if (err) + ssb_dprintk(KERN_ERR PFX + "Can not unregister GPIO driver: %i\n", err); + ssb_buses_lock(); ssb_devices_unregister(bus); list_del(&bus->list); diff --git a/drivers/ssb/ssb_private.h b/drivers/ssb/ssb_private.h index 6c10b66..da38305 100644 --- a/drivers/ssb/ssb_private.h +++ b/drivers/ssb/ssb_private.h @@ -252,11 +252,16 @@ static inline void ssb_extif_init(struct ssb_extif *extif) #ifdef CONFIG_SSB_DRIVER_GPIO extern int ssb_gpio_init(struct ssb_bus *bus); +extern int ssb_gpio_unregister(struct ssb_bus *bus); #else /* CONFIG_SSB_DRIVER_GPIO */ static inline int ssb_gpio_init(struct ssb_bus *bus) { return -ENOTSUPP; } +static inline int ssb_gpio_unregister(struct ssb_bus *bus) +{ + return 0; +} #endif /* CONFIG_SSB_DRIVER_GPIO */ #endif /* LINUX_SSB_PRIVATE_H_ */ -- cgit v0.10.2 From 7b2385b95363c9ff49801c19cba2489a05bd6672 Mon Sep 17 00:00:00 2001 From: Arend van Spriel Date: Sat, 2 Feb 2013 14:36:50 +0100 Subject: brcmsmac: rework of mac80211 .flush() callback operation MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch addresses a long standing issue of the driver with the mac80211 .flush() callback. Since implementing the .flush() callback a number of issues have been fixed, but a WARN_ON_ONCE() was still triggered because the timeout on the flush could still occur. This patch changes the awkward design using msleep() into one using a waitqueue. The waiting flush() context will kick the transmit dma when it is idle and the timeout used waiting for the event is set to 500 ms. Worst case there can be 64 frames outstanding for transmit in the driver. At a rate of 1Mbps that would take 1.5 seconds assuming MTU is 1500 bytes and ignoring retries. The WARN_ON_ONCE() is also removed as this was put in to indicate the flush timeout as a reason for the driver to stall. That was not happening since fixing endless AMPDU retries with following upstream commit: commit 85091fc0a75653e239dc8379658515e577544927 Author: Arend van Spriel Date: Thu Feb 23 18:38:22 2012 +0100 brcm80211: smac: fix endless retry of A-MPDU transmissions bugzilla: 42840 bugzilla@redhat: bugzilla@redhat: Cc: Jonathan Nieder Cc: Stanislaw Gruszka Cc: Camaleón Cc: Milan Bouchet-Valat Cc: Seth Forshee Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Reviewed-by: Piotr Haber Signed-off-by: Arend van Spriel Acked-by: Seth Forshee Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c index 0f71d1d..e5fd209 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.c @@ -36,6 +36,7 @@ #include "debug.h" #define N_TX_QUEUES 4 /* #tx queues on mac80211<->driver interface */ +#define BRCMS_FLUSH_TIMEOUT 500 /* msec */ /* Flags we support */ #define MAC_FILTERS (FIF_PROMISC_IN_BSS | \ @@ -708,16 +709,29 @@ static void brcms_ops_rfkill_poll(struct ieee80211_hw *hw) wiphy_rfkill_set_hw_state(wl->pub->ieee_hw->wiphy, blocked); } +static bool brcms_tx_flush_completed(struct brcms_info *wl) +{ + bool result; + + spin_lock_bh(&wl->lock); + result = brcms_c_tx_flush_completed(wl->wlc); + spin_unlock_bh(&wl->lock); + return result; +} + static void brcms_ops_flush(struct ieee80211_hw *hw, bool drop) { struct brcms_info *wl = hw->priv; + int ret; no_printk("%s: drop = %s\n", __func__, drop ? "true" : "false"); - /* wait for packet queue and dma fifos to run empty */ - spin_lock_bh(&wl->lock); - brcms_c_wait_for_tx_completion(wl->wlc, drop); - spin_unlock_bh(&wl->lock); + ret = wait_event_timeout(wl->tx_flush_wq, + brcms_tx_flush_completed(wl), + msecs_to_jiffies(BRCMS_FLUSH_TIMEOUT)); + + brcms_dbg_mac80211(wl->wlc->hw->d11core, + "ret=%d\n", jiffies_to_msecs(ret)); } static const struct ieee80211_ops brcms_ops = { @@ -772,6 +786,7 @@ void brcms_dpc(unsigned long data) done: spin_unlock_bh(&wl->lock); + wake_up(&wl->tx_flush_wq); } /* @@ -1020,6 +1035,8 @@ static struct brcms_info *brcms_attach(struct bcma_device *pdev) atomic_set(&wl->callbacks, 0); + init_waitqueue_head(&wl->tx_flush_wq); + /* setup the bottom half handler */ tasklet_init(&wl->tasklet, brcms_dpc, (unsigned long) wl); @@ -1609,13 +1626,3 @@ bool brcms_rfkill_set_hw_state(struct brcms_info *wl) spin_lock_bh(&wl->lock); return blocked; } - -/* - * precondition: perimeter lock has been acquired - */ -void brcms_msleep(struct brcms_info *wl, uint ms) -{ - spin_unlock_bh(&wl->lock); - msleep(ms); - spin_lock_bh(&wl->lock); -} diff --git a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h index 9358bd5..947ccac 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/mac80211_if.h @@ -68,6 +68,8 @@ struct brcms_info { spinlock_t lock; /* per-device perimeter lock */ spinlock_t isr_lock; /* per-device ISR synchronization lock */ + /* tx flush */ + wait_queue_head_t tx_flush_wq; /* timer related fields */ atomic_t callbacks; /* # outstanding callback functions */ @@ -100,7 +102,6 @@ extern struct brcms_timer *brcms_init_timer(struct brcms_info *wl, extern void brcms_free_timer(struct brcms_timer *timer); extern void brcms_add_timer(struct brcms_timer *timer, uint ms, int periodic); extern bool brcms_del_timer(struct brcms_timer *timer); -extern void brcms_msleep(struct brcms_info *wl, uint ms); extern void brcms_dpc(unsigned long data); extern void brcms_timer(struct brcms_timer *t); extern void brcms_fatal_error(struct brcms_info *wl); diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index 9f3d7e9..8b58390 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -7511,25 +7511,16 @@ int brcms_c_get_curband(struct brcms_c_info *wlc) return wlc->band->bandunit; } -void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc, bool drop) +bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc) { - int timeout = 20; int i; /* Kick DMA to send any pending AMPDU */ for (i = 0; i < ARRAY_SIZE(wlc->hw->di); i++) if (wlc->hw->di[i]) - dma_txflush(wlc->hw->di[i]); + dma_kick_tx(wlc->hw->di[i]); - /* wait for queue and DMA fifos to run dry */ - while (brcms_txpktpendtot(wlc) > 0) { - brcms_msleep(wlc->wl, 1); - - if (--timeout == 0) - break; - } - - WARN_ON_ONCE(timeout == 0); + return !brcms_txpktpendtot(wlc); } void brcms_c_set_beacon_listen_interval(struct brcms_c_info *wlc, u8 interval) diff --git a/drivers/net/wireless/brcm80211/brcmsmac/pub.h b/drivers/net/wireless/brcm80211/brcmsmac/pub.h index 4fb2834..b0f14b7 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/pub.h +++ b/drivers/net/wireless/brcm80211/brcmsmac/pub.h @@ -314,8 +314,6 @@ extern void brcms_c_associate_upd(struct brcms_c_info *wlc, bool state); extern void brcms_c_scan_start(struct brcms_c_info *wlc); extern void brcms_c_scan_stop(struct brcms_c_info *wlc); extern int brcms_c_get_curband(struct brcms_c_info *wlc); -extern void brcms_c_wait_for_tx_completion(struct brcms_c_info *wlc, - bool drop); extern int brcms_c_set_channel(struct brcms_c_info *wlc, u16 channel); extern int brcms_c_set_rate_limit(struct brcms_c_info *wlc, u16 srl, u16 lrl); extern void brcms_c_get_current_rateset(struct brcms_c_info *wlc, @@ -332,5 +330,6 @@ extern int brcms_c_set_tx_power(struct brcms_c_info *wlc, int txpwr); extern int brcms_c_get_tx_power(struct brcms_c_info *wlc); extern bool brcms_c_check_radio_disabled(struct brcms_c_info *wlc); extern void brcms_c_mute(struct brcms_c_info *wlc, bool on); +extern bool brcms_c_tx_flush_completed(struct brcms_c_info *wlc); #endif /* _BRCM_PUB_H_ */ -- cgit v0.10.2 From aa5a1b8e68c95151fd249a3b5ec444c6b0aa2f1c Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Mon, 4 Feb 2013 14:12:41 -0800 Subject: mac80211: stop plink timer only on mesh interfaces Since mesh_plink_quiesce() would unconditionally delete the plink timer, and the timer initialization was recently moved into the mesh code path, suspending with a non-mesh interface now causes a crash. Fix this by only deleting the plink timer for mesh interfaces. Reported-by: Emmanuel Grumbach Tested-by: Emmanuel Grumbach Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index fe7c333..67524e7 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -592,6 +592,9 @@ static void mesh_plink_timer(unsigned long data) #ifdef CONFIG_PM void mesh_plink_quiesce(struct sta_info *sta) { + if (!ieee80211_vif_is_mesh(&sta->sdata->vif)) + return; + if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } -- cgit v0.10.2 From 9887dbf5b2163bcf69cd4456c21352e9a81c6003 Mon Sep 17 00:00:00 2001 From: Cong Ding Date: Wed, 6 Feb 2013 17:23:45 +0100 Subject: mac80211: fix error in sizeof() usage Using 'sizeof' on array given as function argument returns size of a pointer rather than the size of array. Cc: stable@vger.kernel.org Signed-off-by: Cong Ding Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 516fbc9..0479c64 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2004,7 +2004,8 @@ static int ieee80211_set_mcast_rate(struct wiphy *wiphy, struct net_device *dev, { struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); - memcpy(sdata->vif.bss_conf.mcast_rate, rate, sizeof(rate)); + memcpy(sdata->vif.bss_conf.mcast_rate, rate, + sizeof(int) * IEEE80211_NUM_BANDS); return 0; } -- cgit v0.10.2 From d601cd8d950c85032cefdcda162b8cd2cda363bb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 20:54:51 +0100 Subject: mac80211: fix managed mode channel context use My commit f2d9d270c15ae0139b54a7e7466d738327e97e03 ("mac80211: support VHT association") introduced a very stupid bug: the loop to downgrade the channel width never attempted to actually use it again so it would downgrade all the way to 20_NOHT. Fix it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a355292..3b9cb51 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3529,8 +3529,11 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, */ ret = ieee80211_vif_use_channel(sdata, &chandef, IEEE80211_CHANCTX_SHARED); - while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) + while (ret && chandef.width != NL80211_CHAN_WIDTH_20_NOHT) { ifmgd->flags |= chandef_downgrade(&chandef); + ret = ieee80211_vif_use_channel(sdata, &chandef, + IEEE80211_CHANCTX_SHARED); + } return ret; } -- cgit v0.10.2 From 3d9646d0abd02c552f6f15c302b31aa321c2fa8b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Sat, 9 Feb 2013 21:46:34 +0100 Subject: mac80211: fix channel selection bug When trying to connect to an AP that advertises HT but not VHT, the mac80211 code erroneously uses the configuration from the AP as is instead of checking it against regulatory and local capabilities. This can lead to using an invalid or even inexistent channel (like 11/HT40+). Additionally, the return flags from downgrading must be ORed together, to collect them from all of the downgrades. Also clarify the message. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3b9cb51..5107248 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3400,6 +3400,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, ret = 0; +out: while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, IEEE80211_CHAN_DISABLED)) { if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { @@ -3408,14 +3409,13 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, goto out; } - ret = chandef_downgrade(chandef); + ret |= chandef_downgrade(chandef); } if (chandef->width != vht_chandef.width) sdata_info(sdata, - "local regulatory prevented using AP HT/VHT configuration, downgraded\n"); + "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); -out: WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); return ret; } -- cgit v0.10.2 From b7566fc363e23f0efd3fa1e1460f9421cdc0d77e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Mon, 4 Feb 2013 15:33:44 -0600 Subject: cfg80211: Fix memory leak When a driver requests a specific regulatory domain after cfg80211 already has one, a struct ieee80211_regdomain is leaked. Reported-by: Larry Finger Tested-by: Larry Finger Signed-off-by: Larry Finger Signed-off-by: Johannes Berg diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 6ea626b..08d3da2 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -2189,10 +2189,15 @@ static int __set_regdom(const struct ieee80211_regdomain *rd) * However if a driver requested this specific regulatory * domain we keep it for its private use */ - if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) + if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER) { + const struct ieee80211_regdomain *tmp; + + tmp = get_wiphy_regdom(request_wiphy); rcu_assign_pointer(request_wiphy->regd, rd); - else + rcu_free_regdom(tmp); + } else { kfree(rd); + } rd = NULL; -- cgit v0.10.2 From bba87ffe606b7fc5fba73d1c0c5ac1eacd2cebe8 Mon Sep 17 00:00:00 2001 From: Ilan Peer Date: Sun, 3 Feb 2013 08:28:27 +0200 Subject: cfg80211: fix radar check for P2P_DEVICE Radar is not required for P2P_DEVICE interfaces. Signed-off-by: Ilan Peer Signed-off-by: Johannes Berg diff --git a/net/wireless/util.c b/net/wireless/util.c index d7873c7..37a56ee 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1217,10 +1217,10 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, break; case NL80211_IFTYPE_P2P_CLIENT: case NL80211_IFTYPE_STATION: + case NL80211_IFTYPE_P2P_DEVICE: case NL80211_IFTYPE_MONITOR: radar_required = false; break; - case NL80211_IFTYPE_P2P_DEVICE: case NUM_NL80211_IFTYPES: case NL80211_IFTYPE_UNSPECIFIED: default: -- cgit v0.10.2 From 5b112d3d098c97b867cc580f590395cd1e72f18c Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 01:49:58 +0100 Subject: cfg80211: pass wiphy to cfg80211_ref_bss/put_bss This prepares for using the spinlock instead of krefs which is needed in the next patch to track the refs of combined BSSes correctly. Acked-by: Bing Zhao [mwifiex] Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath6kl/cfg80211.c b/drivers/net/wireless/ath/ath6kl/cfg80211.c index 4225cca..a7fb442 100644 --- a/drivers/net/wireless/ath/ath6kl/cfg80211.c +++ b/drivers/net/wireless/ath/ath6kl/cfg80211.c @@ -767,7 +767,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel, ath6kl_dbg(ATH6KL_DBG_WLAN_CFG, "ad-hoc %s selected\n", nw_type & ADHOC_CREATOR ? "creator" : "joiner"); cfg80211_ibss_joined(vif->ndev, bssid, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); return; } @@ -778,7 +778,7 @@ void ath6kl_cfg80211_connect_event(struct ath6kl_vif *vif, u16 channel, assoc_req_ie, assoc_req_len, assoc_resp_ie, assoc_resp_len, WLAN_STATUS_SUCCESS, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); } else if (vif->sme_state == SME_CONNECTED) { /* inform roam event to cfg80211 */ cfg80211_roamed_bss(vif->ndev, bss, assoc_req_ie, assoc_req_len, diff --git a/drivers/net/wireless/ath/ath6kl/wmi.c b/drivers/net/wireless/ath/ath6kl/wmi.c index 998f8b0..d366cf1 100644 --- a/drivers/net/wireless/ath/ath6kl/wmi.c +++ b/drivers/net/wireless/ath/ath6kl/wmi.c @@ -1108,7 +1108,7 @@ static int ath6kl_wmi_bssinfo_event_rx(struct wmi *wmi, u8 *datap, int len, kfree(mgmt); if (bss == NULL) return -ENOMEM; - cfg80211_put_bss(bss); + cfg80211_put_bss(ar->wiphy, bss); /* * Firmware doesn't return any event when scheduled scan has diff --git a/drivers/net/wireless/ath/wil6210/cfg80211.c b/drivers/net/wireless/ath/wil6210/cfg80211.c index 002851f..9ecc196 100644 --- a/drivers/net/wireless/ath/wil6210/cfg80211.c +++ b/drivers/net/wireless/ath/wil6210/cfg80211.c @@ -341,7 +341,7 @@ static int wil_cfg80211_connect(struct wiphy *wiphy, } out: - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); return rc; } diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 0b70e17..79d608c 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -338,7 +338,7 @@ static void wmi_evt_rx_mgmt(struct wil6210_priv *wil, int id, void *d, int len) if (bss) { wil_dbg_wmi(wil, "Added BSS %pM\n", rx_mgmt_frame->bssid); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } else { wil_err(wil, "cfg80211_inform_bss() failed\n"); } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 481f41a..cecc3ef 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -2323,7 +2323,7 @@ static s32 brcmf_inform_single_bss(struct brcmf_cfg80211_info *cfg, if (!bss) return -ENOMEM; - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); return err; } @@ -2429,7 +2429,7 @@ static s32 wl_inform_ibss(struct brcmf_cfg80211_info *cfg, goto CleanUp; } - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); CleanUp: diff --git a/drivers/net/wireless/libertas/cfg.c b/drivers/net/wireless/libertas/cfg.c index 230f8eb..61735db 100644 --- a/drivers/net/wireless/libertas/cfg.c +++ b/drivers/net/wireless/libertas/cfg.c @@ -657,7 +657,7 @@ static int lbs_ret_scan(struct lbs_private *priv, unsigned long dummy, capa, intvl, ie, ielen, LBS_SCAN_RSSI_TO_MBM(rssi), GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } } else lbs_deb_scan("scan response: missing BSS channel IE\n"); @@ -1444,7 +1444,7 @@ static int lbs_cfg_connect(struct wiphy *wiphy, struct net_device *dev, done: if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); lbs_deb_leave_args(LBS_DEB_CFG80211, "ret %d", ret); return ret; } @@ -1766,7 +1766,7 @@ static void lbs_join_post(struct lbs_private *priv, params->beacon_interval, fake_ie, fake - fake_ie, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); memcpy(priv->wdev->ssid, params->ssid, params->ssid_len); priv->wdev->ssid_len = params->ssid_len; @@ -2011,7 +2011,7 @@ static int lbs_join_ibss(struct wiphy *wiphy, struct net_device *dev, if (bss) { ret = lbs_ibss_join_existing(priv, params, bss); - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } else ret = lbs_ibss_start_new(priv, params); diff --git a/drivers/net/wireless/mwifiex/cfg80211.c b/drivers/net/wireless/mwifiex/cfg80211.c index 3a004b8..81c84a2 100644 --- a/drivers/net/wireless/mwifiex/cfg80211.c +++ b/drivers/net/wireless/mwifiex/cfg80211.c @@ -1430,7 +1430,7 @@ static int mwifiex_cfg80211_inform_ibss_bss(struct mwifiex_private *priv) bss = cfg80211_inform_bss(priv->wdev->wiphy, chan, bss_info.bssid, 0, WLAN_CAPABILITY_IBSS, 0, ie_buf, ie_len, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); memcpy(priv->cfg_bssid, bss_info.bssid, ETH_ALEN); return 0; diff --git a/drivers/net/wireless/mwifiex/scan.c b/drivers/net/wireless/mwifiex/scan.c index 9189a32..2324924 100644 --- a/drivers/net/wireless/mwifiex/scan.c +++ b/drivers/net/wireless/mwifiex/scan.c @@ -1746,7 +1746,7 @@ int mwifiex_ret_802_11_scan(struct mwifiex_private *priv, .mac_address, ETH_ALEN)) mwifiex_update_curr_bss_params(priv, bss); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev->wiphy, bss); } } else { dev_dbg(adapter->dev, "missing BSS channel IE\n"); diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index f542bb8..ee85b41 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -324,7 +324,7 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, } if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->adapter->wiphy, bss); } else { /* Adhoc mode */ /* If the requested SSID matches current SSID, return */ @@ -354,7 +354,7 @@ int mwifiex_bss_start(struct mwifiex_private *priv, struct cfg80211_bss *bss, " list. Joining...\n"); ret = mwifiex_adhoc_join(priv, bss_desc); if (bss) - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->adapter->wiphy, bss); } else { dev_dbg(adapter->dev, "info: Network not found in " "the list, creating adhoc with ssid = %s\n", diff --git a/drivers/net/wireless/orinoco/scan.c b/drivers/net/wireless/orinoco/scan.c index 96e39ed..e8c5714 100644 --- a/drivers/net/wireless/orinoco/scan.c +++ b/drivers/net/wireless/orinoco/scan.c @@ -125,7 +125,7 @@ static void orinoco_add_hostscan_result(struct orinoco_private *priv, cbss = cfg80211_inform_bss(wiphy, channel, bss->a.bssid, timestamp, capability, beacon_interval, ie_buf, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(cbss); + cfg80211_put_bss(wiphy, cbss); } void orinoco_add_extscan_result(struct orinoco_private *priv, @@ -158,7 +158,7 @@ void orinoco_add_extscan_result(struct orinoco_private *priv, cbss = cfg80211_inform_bss(wiphy, channel, bss->bssid, timestamp, capability, beacon_interval, ie, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(cbss); + cfg80211_put_bss(wiphy, cbss); } void orinoco_add_hostscan_results(struct orinoco_private *priv, diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index abe1d03..fe2f272 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2029,7 +2029,7 @@ static bool rndis_bss_info_update(struct usbnet *usbdev, bss = cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid->mac, timestamp, capability, beacon_interval, ie, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev.wiphy, bss); return (bss != NULL); } @@ -2718,7 +2718,7 @@ static void rndis_wlan_craft_connected_bss(struct usbnet *usbdev, u8 *bssid, bss = cfg80211_inform_bss(priv->wdev.wiphy, channel, bssid, timestamp, capability, beacon_period, ie_buf, ie_len, signal, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(priv->wdev.wiphy, bss); } /* diff --git a/drivers/staging/wlan-ng/cfg80211.c b/drivers/staging/wlan-ng/cfg80211.c index 18c06a5..a233f64 100644 --- a/drivers/staging/wlan-ng/cfg80211.c +++ b/drivers/staging/wlan-ng/cfg80211.c @@ -424,7 +424,7 @@ int prism2_scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) goto exit; } - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); } if (result) diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 3ec70e1..691b347 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -3166,19 +3166,21 @@ cfg80211_get_ibss(struct wiphy *wiphy, /** * cfg80211_ref_bss - reference BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct to reference * * Increments the refcount of the given BSS struct. */ -void cfg80211_ref_bss(struct cfg80211_bss *bss); +void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_put_bss - unref BSS struct + * @wiphy: the wiphy this BSS struct belongs to * @bss: the BSS struct * * Decrements the refcount of the given BSS struct. */ -void cfg80211_put_bss(struct cfg80211_bss *bss); +void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *bss); /** * cfg80211_unlink_bss - unlink BSS from internal data structures diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index a54c824..71c55cc 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -228,7 +228,7 @@ static void __ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, bss = cfg80211_inform_bss_frame(local->hw.wiphy, chan, mgmt, skb->len, 0, GFP_KERNEL); - cfg80211_put_bss(bss); + cfg80211_put_bss(local->hw.wiphy, bss); netif_carrier_on(sdata->dev); cfg80211_ibss_joined(sdata->dev, ifibss->bssid, GFP_KERNEL); } @@ -1159,7 +1159,7 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) if (cbss) { cfg80211_unlink_bss(local->hw.wiphy, cbss); - cfg80211_put_bss(cbss); + cfg80211_put_bss(local->hw.wiphy, cbss); } } diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 353b690..15f2edd 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1934,7 +1934,7 @@ static void ieee80211_destroy_auth_data(struct ieee80211_sub_if_data *sdata, ieee80211_vif_release_channel(sdata); } - cfg80211_put_bss(auth_data->bss); + cfg80211_put_bss(sdata->local->hw.wiphy, auth_data->bss); kfree(auth_data); sdata->u.mgd.auth_data = NULL; } @@ -2387,7 +2387,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, if (!ieee80211_assoc_success(sdata, *bss, mgmt, len)) { /* oops -- internal error -- send timeout for now */ ieee80211_destroy_assoc_data(sdata, false); - cfg80211_put_bss(*bss); + cfg80211_put_bss(sdata->local->hw.wiphy, *bss); return RX_MGMT_CFG80211_ASSOC_TIMEOUT; } sdata_info(sdata, "associated\n"); @@ -3831,7 +3831,7 @@ int ieee80211_mgd_auth(struct ieee80211_sub_if_data *sdata, } /* hold our own reference */ - cfg80211_ref_bss(auth_data->bss); + cfg80211_ref_bss(local->hw.wiphy, auth_data->bss); err = 0; goto out_unlock; diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 7f80f0a..400153f 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -34,7 +34,8 @@ void ieee80211_rx_bss_put(struct ieee80211_local *local, { if (!bss) return; - cfg80211_put_bss(container_of((void *)bss, struct cfg80211_bss, priv)); + cfg80211_put_bss(local->hw.wiphy, + container_of((void *)bss, struct cfg80211_bss, priv)); } static bool is_uapsd_supported(struct ieee802_11_elems *elems) diff --git a/net/wireless/core.c b/net/wireless/core.c index ce82724..f0a1bbe 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -715,7 +715,7 @@ void cfg80211_dev_free(struct cfg80211_registered_device *rdev) kfree(reg); } list_for_each_entry_safe(scan, tmp, &rdev->bss_list, list) - cfg80211_put_bss(&scan->pub); + cfg80211_put_bss(&rdev->wiphy, &scan->pub); kfree(rdev); } diff --git a/net/wireless/ibss.c b/net/wireless/ibss.c index 9b9551e..d80e471 100644 --- a/net/wireless/ibss.c +++ b/net/wireless/ibss.c @@ -37,7 +37,7 @@ void __cfg80211_ibss_joined(struct net_device *dev, const u8 *bssid) if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } cfg80211_hold_bss(bss_from_pub(bss)); @@ -182,7 +182,7 @@ static void __cfg80211_clear_ibss(struct net_device *dev, bool nowext) if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } wdev->current_bss = NULL; diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index fee9bf7..8e69207 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -58,7 +58,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, */ if (status_code != WLAN_STATUS_SUCCESS && wdev->conn && cfg80211_sme_failed_reassoc(wdev)) { - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); goto out; } @@ -70,7 +70,7 @@ void cfg80211_send_rx_assoc(struct net_device *dev, struct cfg80211_bss *bss, * do not call connect_result() now because the * sme will schedule work that does it later. */ - cfg80211_put_bss(bss); + cfg80211_put_bss(wiphy, bss); goto out; } @@ -108,7 +108,7 @@ void __cfg80211_send_deauth(struct net_device *dev, if (wdev->current_bss && ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; was_current = true; } @@ -164,7 +164,7 @@ void __cfg80211_send_disassoc(struct net_device *dev, ether_addr_equal(wdev->current_bss->pub.bssid, bssid)) { cfg80211_sme_disassoc(dev, wdev->current_bss); cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } else WARN_ON(1); @@ -324,7 +324,7 @@ int __cfg80211_mlme_auth(struct cfg80211_registered_device *rdev, err = rdev_auth(rdev, dev, &req); out: - cfg80211_put_bss(req.bss); + cfg80211_put_bss(&rdev->wiphy, req.bss); return err; } @@ -432,7 +432,7 @@ out: if (err) { if (was_connected) wdev->sme_state = CFG80211_SME_CONNECTED; - cfg80211_put_bss(req.bss); + cfg80211_put_bss(&rdev->wiphy, req.bss); } return err; @@ -572,7 +572,7 @@ void cfg80211_mlme_down(struct cfg80211_registered_device *rdev, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(&rdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } } diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 36daacb..dacb44a 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -818,7 +818,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, } EXPORT_SYMBOL(cfg80211_inform_bss_frame); -void cfg80211_ref_bss(struct cfg80211_bss *pub) +void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { struct cfg80211_internal_bss *bss; @@ -830,7 +830,7 @@ void cfg80211_ref_bss(struct cfg80211_bss *pub) } EXPORT_SYMBOL(cfg80211_ref_bss); -void cfg80211_put_bss(struct cfg80211_bss *pub) +void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { struct cfg80211_internal_bss *bss; diff --git a/net/wireless/sme.c b/net/wireless/sme.c index a825dfe..f432bd3 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -301,7 +301,7 @@ static void __cfg80211_sme_scan_done(struct net_device *dev) bss = cfg80211_get_conn_bss(wdev); if (bss) { - cfg80211_put_bss(bss); + cfg80211_put_bss(&rdev->wiphy, bss); } else { /* not found */ if (wdev->conn->state == CFG80211_CONN_SCAN_AGAIN) @@ -464,7 +464,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; } @@ -480,7 +480,7 @@ void __cfg80211_connect_result(struct net_device *dev, const u8 *bssid, kfree(wdev->connect_keys); wdev->connect_keys = NULL; wdev->ssid_len = 0; - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); return; } @@ -586,7 +586,7 @@ void __cfg80211_roamed(struct wireless_dev *wdev, } cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); wdev->current_bss = NULL; cfg80211_hold_bss(bss_from_pub(bss)); @@ -621,7 +621,7 @@ void __cfg80211_roamed(struct wireless_dev *wdev, return; out: - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); } void cfg80211_roamed(struct net_device *dev, @@ -663,7 +663,7 @@ void cfg80211_roamed_bss(struct net_device *dev, ev = kzalloc(sizeof(*ev) + req_ie_len + resp_ie_len, gfp); if (!ev) { - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); return; } @@ -704,7 +704,7 @@ void __cfg80211_disconnected(struct net_device *dev, const u8 *ie, if (wdev->current_bss) { cfg80211_unhold_bss(wdev->current_bss); - cfg80211_put_bss(&wdev->current_bss->pub); + cfg80211_put_bss(wdev->wiphy, &wdev->current_bss->pub); } wdev->current_bss = NULL; @@ -875,7 +875,7 @@ int __cfg80211_connect(struct cfg80211_registered_device *rdev, if (bss) { wdev->conn->state = CFG80211_CONN_AUTHENTICATE_NEXT; err = cfg80211_conn_do_work(wdev); - cfg80211_put_bss(bss); + cfg80211_put_bss(wdev->wiphy, bss); } else { /* otherwise we'll need to scan for the AP first */ err = cfg80211_conn_scan(wdev); -- cgit v0.10.2 From 077f897a8be9c617e69035af4d17a472d4af272b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 09:06:36 +0100 Subject: wireless: fix kernel-doc Fix most kernel-doc warnings, for some reason it seems to have issues with __aligned, don't remove the documentation entries it considers to be in excess due to that. Reported-by: Fengguang Wu Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 691b347..5d8554b 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -535,7 +535,7 @@ struct mac_address { * struct cfg80211_acl_data - Access control list data * * @acl_policy: ACL policy to be applied on the station's - entry specified by mac_addr + * entry specified by mac_addr * @n_acl_entries: Number of MAC address entries passed * @mac_addrs: List of MAC addresses of stations to be used for ACL */ @@ -666,6 +666,8 @@ struct station_parameters { * @STATION_INFO_INACTIVE_TIME: @inactive_time filled * @STATION_INFO_RX_BYTES: @rx_bytes filled * @STATION_INFO_TX_BYTES: @tx_bytes filled + * @STATION_INFO_RX_BYTES64: @rx_bytes filled with 64-bit value + * @STATION_INFO_TX_BYTES64: @tx_bytes filled with 64-bit value * @STATION_INFO_LLID: @llid filled * @STATION_INFO_PLID: @plid filled * @STATION_INFO_PLINK_STATE: @plink_state filled @@ -674,8 +676,6 @@ struct station_parameters { * (tx_bitrate, tx_bitrate_flags and tx_bitrate_mcs) * @STATION_INFO_RX_PACKETS: @rx_packets filled with 32-bit value * @STATION_INFO_TX_PACKETS: @tx_packets filled with 32-bit value - * @STATION_INFO_RX_PACKETS64: @rx_packets filled with 64-bit value - * @STATION_INFO_TX_PACKETS64: @tx_packets filled with 64-bit value * @STATION_INFO_TX_RETRIES: @tx_retries filled * @STATION_INFO_TX_FAILED: @tx_failed filled * @STATION_INFO_RX_DROP_MISC: @rx_dropped_misc filled @@ -1226,6 +1226,7 @@ struct cfg80211_match_set { * @n_match_sets: number of match sets * @wiphy: the wiphy this was for * @dev: the interface + * @scan_start: start time of the scheduled scan * @channels: channels to scan * @rssi_thold: don't report scan results below this threshold (in s32 dBm) */ @@ -1404,6 +1405,8 @@ struct cfg80211_assoc_request { * @ie: Extra IEs to add to Deauthentication frame or %NULL * @ie_len: Length of ie buffer in octets * @reason_code: The reason code for the deauthentication + * @local_state_change: if set, change local state only and + * do not set a deauth frame */ struct cfg80211_deauth_request { const u8 *bssid; @@ -2629,7 +2632,6 @@ struct cfg80211_cached_keys; * the user-set AP, monitor and WDS channel * @preset_chan: (private) Used by the internal configuration code to * track the channel to be used for AP later - * @preset_chantype: (private) the corresponding channel type * @bssid: (private) Used by the internal configuration code * @ssid: (private) Used by the internal configuration code * @ssid_len: (private) Used by the internal configuration code diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 5a1deba..350578c 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -298,6 +298,7 @@ struct sta_ampdu_mlme { * @beacon_loss_count: number of times beacon loss has triggered * @supports_40mhz: tracks whether the station advertised 40 MHz support * as we overwrite its HT parameters with the currently used value + * @rcu_head: RCU head used for freeing this station struct */ struct sta_info { /* General information, mostly static */ -- cgit v0.10.2 From 45b5028e86292284f4d5794047d5dfd742c22421 Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 6 Feb 2013 10:17:21 -0800 Subject: mac80211: fix mesh sta teardown The patch "mac80211: clean up mesh sta allocation warning" moved some mesh initialization into a path which is only called when the kernel handles peering. This causes a hang when mac80211 tries to clean up a userspace-allocated station entry and delete a timer which has never been initialized. To avoid this, only do any mesh sta peering teardown if the kernel is actually handling it. The same is true when quiescing before suspend. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 35ac388..0c51b78 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -149,6 +149,31 @@ u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata) return changed; } +/* + * mesh_sta_cleanup - clean up any mesh sta state + * + * @sta: mesh sta to clean up. + */ +void mesh_sta_cleanup(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 changed; + + /* + * maybe userspace handles peer allocation and peering, but in either + * case the beacon is still generated by the kernel and we might need + * an update. + */ + changed = mesh_accept_plinks_update(sdata); + if (sdata->u.mesh.security == IEEE80211_MESH_SEC_NONE) { + changed |= mesh_plink_deactivate(sta); + del_timer_sync(&sta->plink_timer); + } + + if (changed) + ieee80211_bss_info_change_notify(sdata, changed); +} + int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) { int i; diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index eb33625..3b9d862 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -288,12 +288,13 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie); u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata); void mesh_plink_broken(struct sta_info *sta); -void mesh_plink_deactivate(struct sta_info *sta); +u32 mesh_plink_deactivate(struct sta_info *sta); int mesh_plink_open(struct sta_info *sta); void mesh_plink_block(struct sta_info *sta); void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status); +void mesh_sta_cleanup(struct sta_info *sta); /* Private interfaces */ /* Mesh tables */ diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 67524e7..56c9b31 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -214,7 +214,7 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) * * All mesh paths with this peer as next hop will be flushed */ -void mesh_plink_deactivate(struct sta_info *sta) +u32 mesh_plink_deactivate(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; @@ -227,7 +227,7 @@ void mesh_plink_deactivate(struct sta_info *sta) sta->reason); spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata, @@ -595,6 +595,10 @@ void mesh_plink_quiesce(struct sta_info *sta) if (!ieee80211_vif_is_mesh(&sta->sdata->vif)) return; + /* no kernel mesh sta timers have been initialized */ + if (sta->sdata->u.mesh.security != IEEE80211_MESH_SEC_NONE) + return; + if (del_timer_sync(&sta->plink_timer)) sta->plink_timer_was_running = true; } diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 47a0f06..19db20a 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -137,13 +137,8 @@ static void cleanup_single_sta(struct sta_info *sta) ieee80211_purge_tx_queue(&local->hw, &sta->tx_filtered[ac]); } -#ifdef CONFIG_MAC80211_MESH - if (ieee80211_vif_is_mesh(&sdata->vif)) { - mesh_accept_plinks_update(sdata); - mesh_plink_deactivate(sta); - del_timer_sync(&sta->plink_timer); - } -#endif + if (ieee80211_vif_is_mesh(&sdata->vif)) + mesh_sta_cleanup(sta); cancel_work_sync(&sta->drv_unblock_wk); -- cgit v0.10.2 From 601513aa208f27ea87400a410d42c978421530ec Mon Sep 17 00:00:00 2001 From: Emanuel Taube Date: Wed, 6 Feb 2013 14:17:17 +0100 Subject: mac80211: Add the DS Params for mesh to every band There seems to be no reason, why it has to be limited to 2.4 GHz. Signed-off-by: Emanuel Taube [remove 'local' variable] Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0c51b78..2bf0158 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -393,8 +393,6 @@ mesh_add_rsn_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) int mesh_add_ds_params_ie(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata) { - struct ieee80211_local *local = sdata->local; - struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u8 *pos; @@ -411,13 +409,10 @@ int mesh_add_ds_params_ie(struct sk_buff *skb, chan = chanctx_conf->def.chan; rcu_read_unlock(); - sband = local->hw.wiphy->bands[chan->band]; - if (sband->band == IEEE80211_BAND_2GHZ) { - pos = skb_put(skb, 2 + 1); - *pos++ = WLAN_EID_DS_PARAMS; - *pos++ = 1; - *pos++ = ieee80211_frequency_to_channel(chan->center_freq); - } + pos = skb_put(skb, 2 + 1); + *pos++ = WLAN_EID_DS_PARAMS; + *pos++ = 1; + *pos++ = ieee80211_frequency_to_channel(chan->center_freq); return 0; } -- cgit v0.10.2 From f9e124fbd8cbea974b5dc7e9dafddd17d21df7e2 Mon Sep 17 00:00:00 2001 From: Christian Lamparter Date: Mon, 4 Feb 2013 17:44:44 +0000 Subject: mac80211: protect rx-path with spinlock This patch fixes the problem which was discussed in "mac80211: Fix PN corruption in case of multiple virtual interface" [1]. Amit Shakya reported a serious issue with my patch: mac80211: serialize rx path workers" [2]: In case, ieee80211_rx_handlers processing is going on for skbs received on one vif and at the same time, rx aggregation reorder timer expires on another vif then sta_rx_agg_reorder_timer_expired is invoked and it will push skbs into the single queue (local->rx_skb_queue). ieee80211_rx_handlers in the while loop assumes that the skbs are for the same sdata and sta. This assumption doesn't hold good in this scenario and the PN gets corrupted by PN received in other vif's skb, causing traffic to stop due to PN mismatch." [1] Message-Id: http://mid.gmane.org/201302041844.44436.chunkeey@googlemail.com [2] Commit-Id: 24a8fdad35835e8d71f7 Reported-by: Amit Shakya Signed-off-by: Christian Lamparter Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5fe9db7..080cf09 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -958,14 +958,7 @@ struct ieee80211_local { struct sk_buff_head skb_queue; struct sk_buff_head skb_queue_unreliable; - /* - * Internal FIFO queue which is shared between multiple rx path - * stages. Its main task is to provide a serialization mechanism, - * so all rx handlers can enjoy having exclusive access to their - * private data structures. - */ - struct sk_buff_head rx_skb_queue; - bool running_rx_handler; /* protected by rx_skb_queue.lock */ + spinlock_t rx_path_lock; /* Station data */ /* diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 2bdd454..2220331 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -34,8 +34,6 @@ #include "cfg.h" #include "debugfs.h" -static struct lock_class_key ieee80211_rx_skb_queue_class; - void ieee80211_configure_filter(struct ieee80211_local *local) { u64 mc; @@ -613,21 +611,12 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, mutex_init(&local->key_mtx); spin_lock_init(&local->filter_lock); + spin_lock_init(&local->rx_path_lock); spin_lock_init(&local->queue_stop_reason_lock); INIT_LIST_HEAD(&local->chanctx_list); mutex_init(&local->chanctx_mtx); - /* - * The rx_skb_queue is only accessed from tasklets, - * but other SKB queues are used from within IRQ - * context. Therefore, this one needs a different - * locking class so our direct, non-irq-safe use of - * the queue's lock doesn't throw lockdep warnings. - */ - skb_queue_head_init_class(&local->rx_skb_queue, - &ieee80211_rx_skb_queue_class); - INIT_DELAYED_WORK(&local->scan_work, ieee80211_scan_work); INIT_WORK(&local->restart_work, ieee80211_restart_work); @@ -1089,7 +1078,6 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw) wiphy_warn(local->hw.wiphy, "skb_queue not empty\n"); skb_queue_purge(&local->skb_queue); skb_queue_purge(&local->skb_queue_unreliable); - skb_queue_purge(&local->rx_skb_queue); destroy_workqueue(local->workqueue); wiphy_unregister(local->hw.wiphy); diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index c98be05..b5f1bba 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -668,9 +668,9 @@ static inline u16 seq_sub(u16 sq1, u16 sq2) static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - int index) + int index, + struct sk_buff_head *frames) { - struct ieee80211_local *local = sdata->local; struct sk_buff *skb = tid_agg_rx->reorder_buf[index]; struct ieee80211_rx_status *status; @@ -684,7 +684,7 @@ static void ieee80211_release_reorder_frame(struct ieee80211_sub_if_data *sdata, tid_agg_rx->reorder_buf[index] = NULL; status = IEEE80211_SKB_RXCB(skb); status->rx_flags |= IEEE80211_RX_DEFERRED_RELEASE; - skb_queue_tail(&local->rx_skb_queue, skb); + __skb_queue_tail(frames, skb); no_frame: tid_agg_rx->head_seq_num = seq_inc(tid_agg_rx->head_seq_num); @@ -692,7 +692,8 @@ no_frame: static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - u16 head_seq_num) + u16 head_seq_num, + struct sk_buff_head *frames) { int index; @@ -701,7 +702,8 @@ static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata while (seq_less(tid_agg_rx->head_seq_num, head_seq_num)) { index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; - ieee80211_release_reorder_frame(sdata, tid_agg_rx, index); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, + frames); } } @@ -717,7 +719,8 @@ static void ieee80211_release_reorder_frames(struct ieee80211_sub_if_data *sdata #define HT_RX_REORDER_BUF_TIMEOUT (HZ / 10) static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, - struct tid_ampdu_rx *tid_agg_rx) + struct tid_ampdu_rx *tid_agg_rx, + struct sk_buff_head *frames) { int index, j; @@ -746,7 +749,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, ht_dbg_ratelimited(sdata, "release an RX reorder frame due to timeout on earlier frames\n"); - ieee80211_release_reorder_frame(sdata, tid_agg_rx, j); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, j, + frames); /* * Increment the head seq# also for the skipped slots. @@ -756,7 +760,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, skipped = 0; } } else while (tid_agg_rx->reorder_buf[index]) { - ieee80211_release_reorder_frame(sdata, tid_agg_rx, index); + ieee80211_release_reorder_frame(sdata, tid_agg_rx, index, + frames); index = seq_sub(tid_agg_rx->head_seq_num, tid_agg_rx->ssn) % tid_agg_rx->buf_size; } @@ -788,7 +793,8 @@ static void ieee80211_sta_reorder_release(struct ieee80211_sub_if_data *sdata, */ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata, struct tid_ampdu_rx *tid_agg_rx, - struct sk_buff *skb) + struct sk_buff *skb, + struct sk_buff_head *frames) { struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; u16 sc = le16_to_cpu(hdr->seq_ctrl); @@ -816,7 +822,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata head_seq_num = seq_inc(seq_sub(mpdu_seq_num, buf_size)); /* release stored frames up to new head to stack */ ieee80211_release_reorder_frames(sdata, tid_agg_rx, - head_seq_num); + head_seq_num, frames); } /* Now the new frame is always in the range of the reordering buffer */ @@ -846,7 +852,7 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata tid_agg_rx->reorder_buf[index] = skb; tid_agg_rx->reorder_time[index] = jiffies; tid_agg_rx->stored_mpdu_num++; - ieee80211_sta_reorder_release(sdata, tid_agg_rx); + ieee80211_sta_reorder_release(sdata, tid_agg_rx, frames); out: spin_unlock(&tid_agg_rx->reorder_lock); @@ -857,7 +863,8 @@ static bool ieee80211_sta_manage_reorder_buf(struct ieee80211_sub_if_data *sdata * Reorder MPDUs from A-MPDUs, keeping them on a buffer. Returns * true if the MPDU was buffered, false if it should be processed. */ -static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx) +static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx, + struct sk_buff_head *frames) { struct sk_buff *skb = rx->skb; struct ieee80211_local *local = rx->local; @@ -922,11 +929,12 @@ static void ieee80211_rx_reorder_ampdu(struct ieee80211_rx_data *rx) * sure that we cannot get to it any more before doing * anything with it. */ - if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb)) + if (ieee80211_sta_manage_reorder_buf(rx->sdata, tid_agg_rx, skb, + frames)) return; dont_reorder: - skb_queue_tail(&local->rx_skb_queue, skb); + __skb_queue_tail(frames, skb); } static ieee80211_rx_result debug_noinline @@ -2184,7 +2192,7 @@ ieee80211_rx_h_data(struct ieee80211_rx_data *rx) } static ieee80211_rx_result debug_noinline -ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) +ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx, struct sk_buff_head *frames) { struct sk_buff *skb = rx->skb; struct ieee80211_bar *bar = (struct ieee80211_bar *)skb->data; @@ -2223,7 +2231,7 @@ ieee80211_rx_h_ctrl(struct ieee80211_rx_data *rx) spin_lock(&tid_agg_rx->reorder_lock); /* release stored frames up to start of BAR */ ieee80211_release_reorder_frames(rx->sdata, tid_agg_rx, - start_seq_num); + start_seq_num, frames); spin_unlock(&tid_agg_rx->reorder_lock); kfree_skb(skb); @@ -2808,7 +2816,8 @@ static void ieee80211_rx_handlers_result(struct ieee80211_rx_data *rx, } } -static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) +static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx, + struct sk_buff_head *frames) { ieee80211_rx_result res = RX_DROP_MONITOR; struct sk_buff *skb; @@ -2820,15 +2829,9 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) goto rxh_next; \ } while (0); - spin_lock(&rx->local->rx_skb_queue.lock); - if (rx->local->running_rx_handler) - goto unlock; - - rx->local->running_rx_handler = true; - - while ((skb = __skb_dequeue(&rx->local->rx_skb_queue))) { - spin_unlock(&rx->local->rx_skb_queue.lock); + spin_lock_bh(&rx->local->rx_path_lock); + while ((skb = __skb_dequeue(frames))) { /* * all the other fields are valid across frames * that belong to an aMPDU since they are on the @@ -2849,7 +2852,12 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) #endif CALL_RXH(ieee80211_rx_h_amsdu) CALL_RXH(ieee80211_rx_h_data) - CALL_RXH(ieee80211_rx_h_ctrl); + + /* special treatment -- needs the queue */ + res = ieee80211_rx_h_ctrl(rx, frames); + if (res != RX_CONTINUE) + goto rxh_next; + CALL_RXH(ieee80211_rx_h_mgmt_check) CALL_RXH(ieee80211_rx_h_action) CALL_RXH(ieee80211_rx_h_userspace_mgmt) @@ -2858,20 +2866,20 @@ static void ieee80211_rx_handlers(struct ieee80211_rx_data *rx) rxh_next: ieee80211_rx_handlers_result(rx, res); - spin_lock(&rx->local->rx_skb_queue.lock); + #undef CALL_RXH } - rx->local->running_rx_handler = false; - - unlock: - spin_unlock(&rx->local->rx_skb_queue.lock); + spin_unlock_bh(&rx->local->rx_path_lock); } static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) { + struct sk_buff_head reorder_release; ieee80211_rx_result res = RX_DROP_MONITOR; + __skb_queue_head_init(&reorder_release); + #define CALL_RXH(rxh) \ do { \ res = rxh(rx); \ @@ -2881,9 +2889,9 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) CALL_RXH(ieee80211_rx_h_check) - ieee80211_rx_reorder_ampdu(rx); + ieee80211_rx_reorder_ampdu(rx, &reorder_release); - ieee80211_rx_handlers(rx); + ieee80211_rx_handlers(rx, &reorder_release); return; rxh_next: @@ -2898,6 +2906,7 @@ static void ieee80211_invoke_rx_handlers(struct ieee80211_rx_data *rx) */ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) { + struct sk_buff_head frames; struct ieee80211_rx_data rx = { .sta = sta, .sdata = sta->sdata, @@ -2913,11 +2922,13 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid) if (!tid_agg_rx) return; + __skb_queue_head_init(&frames); + spin_lock(&tid_agg_rx->reorder_lock); - ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx); + ieee80211_sta_reorder_release(sta->sdata, tid_agg_rx, &frames); spin_unlock(&tid_agg_rx->reorder_lock); - ieee80211_rx_handlers(&rx); + ieee80211_rx_handlers(&rx, &frames); } /* main receive path */ -- cgit v0.10.2 From 112c31f095a7106fbb3ced0dae50aa9b36ac2662 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 22:59:00 +0100 Subject: mac80211: fix AP beacon loss messages The messages currently refer to probe request probes, but on some devices null data packets will be used instead. Make the messages more generic. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 15f2edd..40ce00c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1746,7 +1746,7 @@ static void ieee80211_mgd_probe_ap(struct ieee80211_sub_if_data *sdata, if (beacon) mlme_dbg_ratelimited(sdata, - "detected beacon loss from AP - sending probe request\n"); + "detected beacon loss from AP - probing\n"); ieee80211_cqm_rssi_notify(&sdata->vif, NL80211_CQM_RSSI_BEACON_LOSS_EVENT, GFP_KERNEL); @@ -2641,7 +2641,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, if (ifmgd->flags & IEEE80211_STA_BEACON_POLL) { mlme_dbg_ratelimited(sdata, - "cancelling probereq poll due to a received beacon\n"); + "cancelling AP probe due to a received beacon\n"); mutex_lock(&local->mtx); ifmgd->flags &= ~IEEE80211_STA_BEACON_POLL; ieee80211_run_deferred_scan(local); -- cgit v0.10.2 From 757af6fefd53628bcfe75f7fbd302c5d4c02eba5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 21:29:59 +0100 Subject: mac80211: fix chandef tracing bug The chandef tracing writes center_freq1 twice, so that it is always 0 (no driver supports 80+80 yet) and leaves center_freq2 unset. Fix this mistake. Signed-off-by: Johannes Berg diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 6ca53d6..a2ca72c 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -36,7 +36,7 @@ __entry->control_freq = (c)->chan->center_freq; \ __entry->chan_width = (c)->width; \ __entry->center_freq1 = (c)->center_freq1; \ - __entry->center_freq1 = (c)->center_freq2; + __entry->center_freq2 = (c)->center_freq2; #define CHANDEF_PR_FMT " control:%d MHz width:%d center: %d/%d MHz" #define CHANDEF_PR_ARG __entry->control_freq, __entry->chan_width, \ __entry->center_freq1, __entry->center_freq2 -- cgit v0.10.2 From 1f4ac5a63f897a480fffd0d5c843b03f02c384a5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 12:07:44 +0100 Subject: mac80211: explicitly copy channels to VLANs where needed Currently the code assigns channel contexts to VLANs (for use by the TX/RX code) when the AP master gets its channel context assigned. This works fine, but in the upcoming radar detection work the VLANs don't require a channel context (during radar detection) and assigning one to them anyway causes issues with locking and also inconsistencies -- a VLAN interface that is added before radar detection would get the channel context, while one added during it wouldn't. Fix these issues moving the channel context copying to a new explicit operation that will not be used in the radar detection code. Acked-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index f4f7e76..8f6b593 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -933,6 +933,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, IEEE80211_CHANCTX_SHARED); if (err) return err; + ieee80211_vif_copy_chanctx_to_vlans(sdata, false); /* * Apply control port protocol, this allows us to @@ -1047,6 +1048,7 @@ static int ieee80211_stop_ap(struct wiphy *wiphy, struct net_device *dev) local->total_ps_buffered -= skb_queue_len(&sdata->u.ap.ps.bc_buf); skb_queue_purge(&sdata->u.ap.ps.bc_buf); + ieee80211_vif_copy_chanctx_to_vlans(sdata, true); ieee80211_vif_release_channel(sdata); return 0; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 1bfe0a8..b5b5076 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -198,15 +198,6 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) ctx = container_of(conf, struct ieee80211_chanctx, conf); - if (sdata->vif.type == NL80211_IFTYPE_AP) { - struct ieee80211_sub_if_data *vlan; - - /* for the VLAN list */ - ASSERT_RTNL(); - list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - rcu_assign_pointer(vlan->vif.chanctx_conf, NULL); - } - ieee80211_unassign_vif_chanctx(sdata, ctx); if (ctx->refcount == 0) ieee80211_free_chanctx(local, ctx); @@ -326,15 +317,6 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, goto out; } - if (sdata->vif.type == NL80211_IFTYPE_AP) { - struct ieee80211_sub_if_data *vlan; - - /* for the VLAN list */ - ASSERT_RTNL(); - list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) - rcu_assign_pointer(vlan->vif.chanctx_conf, &ctx->conf); - } - ieee80211_recalc_smps_chanctx(local, ctx); out: mutex_unlock(&local->chanctx_mtx); @@ -369,6 +351,40 @@ void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata) mutex_unlock(&local->chanctx_mtx); } +void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, + bool clear) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_sub_if_data *vlan; + struct ieee80211_chanctx_conf *conf; + + ASSERT_RTNL(); + + if (WARN_ON(sdata->vif.type != NL80211_IFTYPE_AP)) + return; + + mutex_lock(&local->chanctx_mtx); + + /* + * Check that conf exists, even when clearing this function + * must be called with the AP's channel context still there + * as it would otherwise cause VLANs to have an invalid + * channel context pointer for a while, possibly pointing + * to a channel context that has already been freed. + */ + conf = rcu_dereference_protected(sdata->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + WARN_ON(!conf); + + if (clear) + conf = NULL; + + list_for_each_entry(vlan, &sdata->u.ap.vlans, u.vlan.list) + rcu_assign_pointer(vlan->vif.chanctx_conf, conf); + + mutex_unlock(&local->chanctx_mtx); +} + void ieee80211_iter_chan_contexts_atomic( struct ieee80211_hw *hw, void (*iter)(struct ieee80211_hw *hw, diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 080cf09..8e884fc 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1605,6 +1605,8 @@ ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, enum ieee80211_chanctx_mode mode); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); +void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, + bool clear); void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx); -- cgit v0.10.2 From 776b3580178f2065838fa0db0eb7a41b57495c0a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 1 Feb 2013 02:06:18 +0100 Subject: cfg80211: track hidden SSID networks properly Currently, cfg80211 will copy beacon IEs from a previously received hidden SSID beacon to a probe response entry, if that entry is created after the beacon entry. However, if it is the other way around, or if the beacon is updated, such changes aren't propagated. Fix this by tracking the relation between the probe response and beacon BSS structs in this case. In case drivers have private data stored in a BSS struct and need access to such data from a beacon entry, cfg80211 now provides the hidden_beacon_bss pointer from the probe response entry to the beacon entry. Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5d8554b..04a702d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1292,7 +1292,14 @@ struct cfg80211_bss_ies { * either the beacon_ies or proberesp_ies depending on whether Probe * Response frame has been received * @beacon_ies: the information elements from the last Beacon frame + * (implementation note: if @hidden_beacon_bss is set this struct doesn't + * own the beacon_ies, but they're just pointers to the ones from the + * @hidden_beacon_bss struct) * @proberesp_ies: the information elements from the last Probe Response frame + * @hidden_beacon_bss: in case this BSS struct represents a probe response from + * a BSS that hides the SSID in its beacon, this points to the BSS struct + * that holds the beacon data. @beacon_ies is still valid, of course, and + * points to the same data as hidden_beacon_bss->beacon_ies in that case. * @signal: signal strength value (type depends on the wiphy's signal_type) * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ @@ -1305,6 +1312,8 @@ struct cfg80211_bss { const struct cfg80211_bss_ies __rcu *beacon_ies; const struct cfg80211_bss_ies __rcu *proberesp_ies; + struct cfg80211_bss *hidden_beacon_bss; + s32 signal; u16 beacon_interval; diff --git a/net/wireless/core.h b/net/wireless/core.h index 8396f76..37d70dc 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -8,7 +8,6 @@ #include #include #include -#include #include #include #include @@ -124,9 +123,10 @@ static inline void assert_cfg80211_lock(void) struct cfg80211_internal_bss { struct list_head list; + struct list_head hidden_list; struct rb_node rbn; unsigned long ts; - struct kref ref; + unsigned long refcount; atomic_t hold; /* must be last because of priv member */ diff --git a/net/wireless/scan.c b/net/wireless/scan.c index dacb44a..5e0983d 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -19,46 +19,124 @@ #include "wext-compat.h" #include "rdev-ops.h" +/** + * DOC: BSS tree/list structure + * + * At the top level, the BSS list is kept in both a list in each + * registered device (@bss_list) as well as an RB-tree for faster + * lookup. In the RB-tree, entries can be looked up using their + * channel, MESHID, MESHCONF (for MBSSes) or channel, BSSID, SSID + * for other BSSes. + * + * Due to the possibility of hidden SSIDs, there's a second level + * structure, the "hidden_list" and "hidden_beacon_bss" pointer. + * The hidden_list connects all BSSes belonging to a single AP + * that has a hidden SSID, and connects beacon and probe response + * entries. For a probe response entry for a hidden SSID, the + * hidden_beacon_bss pointer points to the BSS struct holding the + * beacon's information. + * + * Reference counting is done for all these references except for + * the hidden_list, so that a beacon BSS struct that is otherwise + * not referenced has one reference for being on the bss_list and + * one for each probe response entry that points to it using the + * hidden_beacon_bss pointer. When a BSS struct that has such a + * pointer is get/put, the refcount update is also propagated to + * the referenced struct, this ensure that it cannot get removed + * while somebody is using the probe response version. + * + * Note that the hidden_beacon_bss pointer never changes, due to + * the reference counting. Therefore, no locking is needed for + * it. + * + * Also note that the hidden_beacon_bss pointer is only relevant + * if the driver uses something other than the IEs, e.g. private + * data stored stored in the BSS struct, since the beacon IEs are + * also linked into the probe response struct. + */ + #define IEEE80211_SCAN_RESULT_EXPIRE (30 * HZ) -static void bss_release(struct kref *ref) +static void bss_free(struct cfg80211_internal_bss *bss) { struct cfg80211_bss_ies *ies; - struct cfg80211_internal_bss *bss; - - bss = container_of(ref, struct cfg80211_internal_bss, ref); if (WARN_ON(atomic_read(&bss->hold))) return; ies = (void *)rcu_access_pointer(bss->pub.beacon_ies); - if (ies) + if (ies && !bss->pub.hidden_beacon_bss) kfree_rcu(ies, rcu_head); ies = (void *)rcu_access_pointer(bss->pub.proberesp_ies); if (ies) kfree_rcu(ies, rcu_head); + /* + * This happens when the module is removed, it doesn't + * really matter any more save for completeness + */ + if (!list_empty(&bss->hidden_list)) + list_del(&bss->hidden_list); + kfree(bss); } -static inline void bss_ref_get(struct cfg80211_internal_bss *bss) +static inline void bss_ref_get(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *bss) { - kref_get(&bss->ref); + lockdep_assert_held(&dev->bss_lock); + + bss->refcount++; + if (bss->pub.hidden_beacon_bss) { + bss = container_of(bss->pub.hidden_beacon_bss, + struct cfg80211_internal_bss, + pub); + bss->refcount++; + } } -static inline void bss_ref_put(struct cfg80211_internal_bss *bss) +static inline void bss_ref_put(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *bss) { - kref_put(&bss->ref, bss_release); + lockdep_assert_held(&dev->bss_lock); + + if (bss->pub.hidden_beacon_bss) { + struct cfg80211_internal_bss *hbss; + hbss = container_of(bss->pub.hidden_beacon_bss, + struct cfg80211_internal_bss, + pub); + hbss->refcount--; + if (hbss->refcount == 0) + bss_free(hbss); + } + bss->refcount--; + if (bss->refcount == 0) + bss_free(bss); } -static void __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, +static bool __cfg80211_unlink_bss(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *bss) { lockdep_assert_held(&dev->bss_lock); + if (!list_empty(&bss->hidden_list)) { + /* + * don't remove the beacon entry if it has + * probe responses associated with it + */ + if (!bss->pub.hidden_beacon_bss) + return false; + /* + * if it's a probe response entry break its + * link to the other entries in the group + */ + list_del_init(&bss->hidden_list); + } + list_del_init(&bss->list); rb_erase(&bss->rbn, &dev->bss_tree); - bss_ref_put(bss); + bss_ref_put(dev, bss); + return true; } static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, @@ -75,8 +153,8 @@ static void __cfg80211_bss_expire(struct cfg80211_registered_device *dev, if (!time_after(expire_time, bss->ts)) continue; - __cfg80211_unlink_bss(dev, bss); - expired = true; + if (__cfg80211_unlink_bss(dev, bss)) + expired = true; } if (expired) @@ -466,7 +544,7 @@ struct cfg80211_bss *cfg80211_get_bss(struct wiphy *wiphy, continue; if (is_bss(&bss->pub, bssid, ssid, ssid_len)) { res = bss; - bss_ref_get(res); + bss_ref_get(dev, res); break; } } @@ -532,23 +610,67 @@ rb_find_bss(struct cfg80211_registered_device *dev, return NULL; } -static void -copy_hidden_ies(struct cfg80211_internal_bss *res, - struct cfg80211_internal_bss *hidden) +static bool cfg80211_combine_bsses(struct cfg80211_registered_device *dev, + struct cfg80211_internal_bss *new) { const struct cfg80211_bss_ies *ies; + struct cfg80211_internal_bss *bss; + const u8 *ie; + int i, ssidlen; + u8 fold = 0; - if (rcu_access_pointer(res->pub.beacon_ies)) - return; - - ies = rcu_access_pointer(hidden->pub.beacon_ies); + ies = rcu_access_pointer(new->pub.beacon_ies); if (WARN_ON(!ies)) - return; + return false; - ies = kmemdup(ies, sizeof(*ies) + ies->len, GFP_ATOMIC); - if (unlikely(!ies)) - return; - rcu_assign_pointer(res->pub.beacon_ies, ies); + ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); + if (!ie) { + /* nothing to do */ + return true; + } + + ssidlen = ie[1]; + for (i = 0; i < ssidlen; i++) + fold |= ie[2 + i]; + + if (fold) { + /* not a hidden SSID */ + return true; + } + + /* This is the bad part ... */ + + list_for_each_entry(bss, &dev->bss_list, list) { + if (!ether_addr_equal(bss->pub.bssid, new->pub.bssid)) + continue; + if (bss->pub.channel != new->pub.channel) + continue; + if (rcu_access_pointer(bss->pub.beacon_ies)) + continue; + ies = rcu_access_pointer(bss->pub.ies); + if (!ies) + continue; + ie = cfg80211_find_ie(WLAN_EID_SSID, ies->data, ies->len); + if (!ie) + continue; + if (ssidlen && ie[1] != ssidlen) + continue; + /* that would be odd ... */ + if (bss->pub.beacon_ies) + continue; + if (WARN_ON_ONCE(bss->pub.hidden_beacon_bss)) + continue; + if (WARN_ON_ONCE(!list_empty(&bss->hidden_list))) + list_del(&bss->hidden_list); + /* combine them */ + list_add(&bss->hidden_list, &new->hidden_list); + bss->pub.hidden_beacon_bss = &new->pub; + new->refcount += bss->refcount; + rcu_assign_pointer(bss->pub.beacon_ies, + new->pub.beacon_ies); + } + + return true; } static struct cfg80211_internal_bss * @@ -594,6 +716,21 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, rcu_head); } else if (rcu_access_pointer(tmp->pub.beacon_ies)) { const struct cfg80211_bss_ies *old; + struct cfg80211_internal_bss *bss; + + if (found->pub.hidden_beacon_bss && + !list_empty(&found->hidden_list)) { + /* + * The found BSS struct is one of the probe + * response members of a group, but we're + * receiving a beacon (beacon_ies in the tmp + * bss is used). This can only mean that the + * AP changed its beacon from not having an + * SSID to showing it, which is confusing so + * drop this information. + */ + goto drop; + } old = rcu_access_pointer(found->pub.beacon_ies); @@ -605,6 +742,18 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, rcu_assign_pointer(found->pub.ies, tmp->pub.beacon_ies); + /* Assign beacon IEs to all sub entries */ + list_for_each_entry(bss, &found->hidden_list, + hidden_list) { + const struct cfg80211_bss_ies *ies; + + ies = rcu_access_pointer(bss->pub.beacon_ies); + WARN_ON(ies != old); + + rcu_assign_pointer(bss->pub.beacon_ies, + tmp->pub.beacon_ies); + } + if (old) kfree_rcu((struct cfg80211_bss_ies *)old, rcu_head); @@ -614,24 +763,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, struct cfg80211_internal_bss *hidden; struct cfg80211_bss_ies *ies; - /* First check if the beacon is a probe response from - * a hidden bss. If so, copy beacon ies (with nullified - * ssid) into the probe response bss entry (with real ssid). - * It is required basically for PSM implementation - * (probe responses do not contain tim ie) */ - - /* TODO: The code is not trying to update existing probe - * response bss entries when beacon ies are - * getting changed. */ - hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); - if (hidden) { - copy_hidden_ies(tmp, hidden); - } else { - hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_NUL); - if (hidden) - copy_hidden_ies(tmp, hidden); - } - /* * create a copy -- the "res" variable that is passed in * is allocated on the stack since it's not needed in the @@ -646,21 +777,51 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, ies = (void *)rcu_dereference(tmp->pub.proberesp_ies); if (ies) kfree_rcu(ies, rcu_head); - spin_unlock_bh(&dev->bss_lock); - return NULL; + goto drop; } memcpy(new, tmp, sizeof(*new)); - kref_init(&new->ref); + new->refcount = 1; + INIT_LIST_HEAD(&new->hidden_list); + + if (rcu_access_pointer(tmp->pub.proberesp_ies)) { + hidden = rb_find_bss(dev, tmp, BSS_CMP_HIDE_ZLEN); + if (!hidden) + hidden = rb_find_bss(dev, tmp, + BSS_CMP_HIDE_NUL); + if (hidden) { + new->pub.hidden_beacon_bss = &hidden->pub; + list_add(&new->hidden_list, + &hidden->hidden_list); + hidden->refcount++; + rcu_assign_pointer(new->pub.beacon_ies, + hidden->pub.beacon_ies); + } + } else { + /* + * Ok so we found a beacon, and don't have an entry. If + * it's a beacon with hidden SSID, we might be in for an + * expensive search for any probe responses that should + * be grouped with this beacon for updates ... + */ + if (!cfg80211_combine_bsses(dev, new)) { + kfree(new); + goto drop; + } + } + list_add_tail(&new->list, &dev->bss_list); rb_insert_bss(dev, new); found = new; } dev->bss_generation++; + bss_ref_get(dev, found); spin_unlock_bh(&dev->bss_lock); - bss_ref_get(found); return found; + drop: + spin_unlock_bh(&dev->bss_lock); + return NULL; } static struct ieee80211_channel * @@ -820,25 +981,33 @@ EXPORT_SYMBOL(cfg80211_inform_bss_frame); void cfg80211_ref_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { + struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); struct cfg80211_internal_bss *bss; if (!pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - bss_ref_get(bss); + + spin_lock_bh(&dev->bss_lock); + bss_ref_get(dev, bss); + spin_unlock_bh(&dev->bss_lock); } EXPORT_SYMBOL(cfg80211_ref_bss); void cfg80211_put_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) { + struct cfg80211_registered_device *dev = wiphy_to_dev(wiphy); struct cfg80211_internal_bss *bss; if (!pub) return; bss = container_of(pub, struct cfg80211_internal_bss, pub); - bss_ref_put(bss); + + spin_lock_bh(&dev->bss_lock); + bss_ref_put(dev, bss); + spin_unlock_bh(&dev->bss_lock); } EXPORT_SYMBOL(cfg80211_put_bss); @@ -854,8 +1023,8 @@ void cfg80211_unlink_bss(struct wiphy *wiphy, struct cfg80211_bss *pub) spin_lock_bh(&dev->bss_lock); if (!list_empty(&bss->list)) { - __cfg80211_unlink_bss(dev, bss); - dev->bss_generation++; + if (__cfg80211_unlink_bss(dev, bss)) + dev->bss_generation++; } spin_unlock_bh(&dev->bss_lock); } -- cgit v0.10.2 From b207cdb07f3f01ec1adaac62e9d0cc918c60a81a Mon Sep 17 00:00:00 2001 From: Alexander Bondar Date: Sat, 22 Dec 2012 10:43:33 +0200 Subject: mac80211: add vif debugfs driver callbacks Add debugfs driver callbacks so drivers can add debugfs entries for interfaces. Note that they _must_ remove the entries again as add/remove in the driver doesn't correspond to add/remove in debugfs; the former is up/down while the latter is netdev create/destroy. Signed-off-by: Alexander Bondar Reviewed-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7da1121..46e08ba 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2167,6 +2167,18 @@ enum ieee80211_rate_control_changed { * MAC address of the device going away. * Hence, this callback must be implemented. It can sleep. * + * @add_interface_debugfs: Drivers can use this callback to add debugfs files + * when a vif is added to mac80211. This callback and + * @remove_interface_debugfs should be within a CONFIG_MAC80211_DEBUGFS + * conditional. @remove_interface_debugfs must be provided for cleanup. + * This callback can sleep. + * + * @remove_interface_debugfs: Remove the debugfs files which were added using + * @add_interface_debugfs. This callback must remove all debugfs entries + * that were added because mac80211 only removes interface debugfs when the + * interface is destroyed, not when it is removed from the driver. + * This callback can sleep. + * * @config: Handler for configuration requests. IEEE 802.11 code calls this * function to change hardware configuration, e.g., channel. * This function should never fail but returns a negative error code @@ -2580,6 +2592,12 @@ struct ieee80211_ops { struct ieee80211_vif *vif, struct ieee80211_sta *sta, struct dentry *dir); + void (*add_interface_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct dentry *dir); + void (*remove_interface_debugfs)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct dentry *dir); #endif void (*sta_notify)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, enum sta_notify_cmd, struct ieee80211_sta *sta); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 434b3c4..2b08b99 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -528,6 +528,43 @@ static inline void drv_sta_remove_debugfs(struct ieee80211_local *local, local->ops->sta_remove_debugfs(&local->hw, &sdata->vif, sta, dir); } + +static inline +void drv_add_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + might_sleep(); + + check_sdata_in_driver(sdata); + + if (!local->ops->add_interface_debugfs) + return; + + local->ops->add_interface_debugfs(&local->hw, &sdata->vif, + sdata->debugfs.dir); +} + +static inline +void drv_remove_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) +{ + might_sleep(); + + check_sdata_in_driver(sdata); + + if (!local->ops->remove_interface_debugfs) + return; + + local->ops->remove_interface_debugfs(&local->hw, &sdata->vif, + sdata->debugfs.dir); +} +#else +static inline +void drv_add_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) {} +static inline +void drv_remove_interface_debugfs(struct ieee80211_local *local, + struct ieee80211_sub_if_data *sdata) {} #endif static inline __must_check diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 0a36dc6..deb78e8 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -621,6 +621,8 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) goto err_del_interface; } + drv_add_interface_debugfs(local, sdata); + if (sdata->vif.type == NL80211_IFTYPE_AP) { local->fif_pspoll++; local->fif_probe_req++; @@ -882,6 +884,8 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, */ ieee80211_free_keys(sdata); + drv_remove_interface_debugfs(local, sdata); + if (going_down) drv_remove_interface(local, sdata); } -- cgit v0.10.2 From 83c7aa1a1475ae1c42640ab6e4559016142efc67 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:51:29 +0100 Subject: cfg80211: remove scan ies NULL check There's no way scan BSS IEs can be NULL as even if the allocation fails the frame is discarded. Remove some code checking for this and document that it is always non-NULL. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index ee85b41..8866a2b6 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -162,11 +162,6 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, rcu_read_lock(); ies = rcu_dereference(bss->ies); - if (WARN_ON(!ies)) { - /* should never happen */ - rcu_read_unlock(); - return -EINVAL; - } beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC); beacon_ie_len = ies->len; rcu_read_unlock(); diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 04a702d..fb76631 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1287,10 +1287,10 @@ struct cfg80211_bss_ies { * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order - * @ies: the information elements (Note that there - * is no guarantee that these are well-formed!); this is a pointer to - * either the beacon_ies or proberesp_ies depending on whether Probe - * Response frame has been received + * @ies: the information elements (Note that there is no guarantee that these + * are well-formed!); this is a pointer to either the beacon_ies or + * proberesp_ies depending on whether Probe Response frame has been + * received. It is always non-%NULL. * @beacon_ies: the information elements from the last Beacon frame * (implementation note: if @hidden_beacon_bss is set this struct doesn't * own the beacon_ies, but they're just pointers to the ones from the diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 5e0983d..02a2383 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1293,15 +1293,10 @@ ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, rcu_read_lock(); ies = rcu_dereference(bss->pub.ies); - if (ies) { - rem = ies->len; - ie = ies->data; - } else { - rem = 0; - ie = NULL; - } + rem = ies->len; + ie = ies->data; - while (ies && rem >= 2) { + while (rem >= 2) { /* invalid data */ if (ie[1] > rem - 2) break; -- cgit v0.10.2 From 8cef2c9df88fdd13f518e6607de9d664b31f26cc Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 16:54:31 +0100 Subject: cfg80211: move TSF into IEs While technically the TSF isn't an IE, it can be necessary to distinguish between the TSF from a beacon and a probe response, in particular in order to know the next DTIM TBTT, as not all APs are spec compliant wrt. TSF==0 being a DTIM TBTT and thus the DTIM count needs to be taken into account as well. To allow this, move the TSF into the IE struct so it can be known whence it came. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mwifiex/sta_ioctl.c b/drivers/net/wireless/mwifiex/sta_ioctl.c index 8866a2b6..0d01846 100644 --- a/drivers/net/wireless/mwifiex/sta_ioctl.c +++ b/drivers/net/wireless/mwifiex/sta_ioctl.c @@ -164,6 +164,7 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, ies = rcu_dereference(bss->ies); beacon_ie = kmemdup(ies->data, ies->len, GFP_ATOMIC); beacon_ie_len = ies->len; + bss_desc->timestamp = ies->tsf; rcu_read_unlock(); if (!beacon_ie) { @@ -179,7 +180,6 @@ int mwifiex_fill_new_bss_desc(struct mwifiex_private *priv, bss_desc->cap_info_bitmap = bss->capability; bss_desc->bss_band = bss_priv->band; bss_desc->fw_tsf = bss_priv->fw_tsf; - bss_desc->timestamp = bss->tsf; if (bss_desc->cap_info_bitmap & WLAN_CAPABILITY_PRIVACY) { dev_dbg(priv->adapter->dev, "info: InterpretIE: AP WEP enabled\n"); bss_desc->privacy = MWIFIEX_802_11_PRIV_FILTER_8021X_WEP; diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index fb76631..77686ca 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1266,11 +1266,13 @@ enum cfg80211_signal_type { /** * struct cfg80211_bss_ie_data - BSS entry IE data + * @tsf: TSF contained in the frame that carried these IEs * @rcu_head: internal use, for freeing * @len: length of the IEs * @data: IE data */ struct cfg80211_bss_ies { + u64 tsf; struct rcu_head rcu_head; int len; u8 data[]; @@ -1284,7 +1286,6 @@ struct cfg80211_bss_ies { * * @channel: channel this BSS is on * @bssid: BSSID of the BSS - * @tsf: timestamp of last received update * @beacon_interval: the beacon interval as from the frame * @capability: the capability field in host byte order * @ies: the information elements (Note that there is no guarantee that these @@ -1304,8 +1305,6 @@ struct cfg80211_bss_ies { * @priv: private area for driver use, has at least wiphy->bss_priv_size bytes */ struct cfg80211_bss { - u64 tsf; - struct ieee80211_channel *channel; const struct cfg80211_bss_ies __rcu *ies; diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 71c55cc..055fa94 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -242,6 +242,8 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, u32 basic_rates; int i, j; u16 beacon_int = cbss->beacon_interval; + const struct cfg80211_bss_ies *ies; + u64 tsf; lockdep_assert_held(&sdata->u.ibss.mtx); @@ -265,13 +267,17 @@ static void ieee80211_sta_join_ibss(struct ieee80211_sub_if_data *sdata, } } + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + tsf = ies->tsf; + rcu_read_unlock(); + __ieee80211_sta_join_ibss(sdata, cbss->bssid, beacon_int, cbss->channel, basic_rates, cbss->capability, - cbss->tsf, - false); + tsf, false); } static struct sta_info *ieee80211_ibss_finish_sta(struct sta_info *sta, @@ -535,8 +541,8 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, cbss = container_of((void *)bss, struct cfg80211_bss, priv); - /* was just updated in ieee80211_bss_info_update */ - beacon_timestamp = cbss->tsf; + /* same for beacon and probe response */ + beacon_timestamp = le64_to_cpu(mgmt->u.beacon.timestamp); /* check if we need to merge IBSS */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 40ce00c..51eca5a 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3667,6 +3667,7 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, bool have_higher_than_11mbit; int min_rate = INT_MAX, min_rate_index = -1; struct ieee80211_supported_band *sband; + const struct cfg80211_bss_ies *ies; sband = local->hw.wiphy->bands[cbss->channel->band]; @@ -3710,7 +3711,10 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, /* set timing information */ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; - sdata->vif.bss_conf.sync_tsf = cbss->tsf; + rcu_read_lock(); + ies = rcu_dereference(cbss->ies); + sdata->vif.bss_conf.sync_tsf = ies->tsf; + rcu_read_unlock(); sdata->vif.bss_conf.sync_device_ts = bss->device_ts; /* tell driver about BSSID, basic rates and timing */ diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 807d448..93bc63e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -4997,6 +4997,7 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, const struct cfg80211_bss_ies *ies; void *hdr; struct nlattr *bss; + bool tsf = false; ASSERT_WDEV_LOCK(wdev); @@ -5020,22 +5021,24 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, rcu_read_lock(); ies = rcu_dereference(res->ies); - if (ies && ies->len && nla_put(msg, NL80211_BSS_INFORMATION_ELEMENTS, - ies->len, ies->data)) { - rcu_read_unlock(); - goto nla_put_failure; + if (ies) { + if (nla_put_u64(msg, NL80211_BSS_TSF, ies->tsf)) + goto fail_unlock_rcu; + tsf = true; + if (ies->len && nla_put(msg, NL80211_BSS_INFORMATION_ELEMENTS, + ies->len, ies->data)) + goto fail_unlock_rcu; } ies = rcu_dereference(res->beacon_ies); - if (ies && ies->len && nla_put(msg, NL80211_BSS_BEACON_IES, - ies->len, ies->data)) { - rcu_read_unlock(); - goto nla_put_failure; + if (ies) { + if (!tsf && nla_put_u64(msg, NL80211_BSS_TSF, ies->tsf)) + goto fail_unlock_rcu; + if (ies->len && nla_put(msg, NL80211_BSS_BEACON_IES, + ies->len, ies->data)) + goto fail_unlock_rcu; } rcu_read_unlock(); - if (res->tsf && - nla_put_u64(msg, NL80211_BSS_TSF, res->tsf)) - goto nla_put_failure; if (res->beacon_interval && nla_put_u16(msg, NL80211_BSS_BEACON_INTERVAL, res->beacon_interval)) goto nla_put_failure; @@ -5080,6 +5083,8 @@ static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, return genlmsg_end(msg, hdr); + fail_unlock_rcu: + rcu_read_unlock(); nla_put_failure: genlmsg_cancel(msg, hdr); return -EMSGSIZE; diff --git a/net/wireless/scan.c b/net/wireless/scan.c index 02a2383..b7a1679 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -695,7 +695,6 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev, if (found) { found->pub.beacon_interval = tmp->pub.beacon_interval; - found->pub.tsf = tmp->pub.tsf; found->pub.signal = tmp->pub.signal; found->pub.capability = tmp->pub.capability; found->ts = tmp->ts; @@ -880,7 +879,6 @@ cfg80211_inform_bss(struct wiphy *wiphy, memcpy(tmp.pub.bssid, bssid, ETH_ALEN); tmp.pub.channel = channel; tmp.pub.signal = signal; - tmp.pub.tsf = tsf; tmp.pub.beacon_interval = beacon_interval; tmp.pub.capability = capability; /* @@ -895,6 +893,7 @@ cfg80211_inform_bss(struct wiphy *wiphy, if (!ies) return NULL; ies->len = ielen; + ies->tsf = tsf; memcpy(ies->data, ie, ielen); rcu_assign_pointer(tmp.pub.beacon_ies, ies); @@ -951,6 +950,7 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, if (!ies) return NULL; ies->len = ielen; + ies->tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); memcpy(ies->data, mgmt->u.probe_resp.variable, ielen); if (ieee80211_is_probe_resp(mgmt->frame_control)) @@ -962,7 +962,6 @@ cfg80211_inform_bss_frame(struct wiphy *wiphy, memcpy(tmp.pub.bssid, mgmt->bssid, ETH_ALEN); tmp.pub.channel = channel; tmp.pub.signal = signal; - tmp.pub.tsf = le64_to_cpu(mgmt->u.probe_resp.timestamp); tmp.pub.beacon_interval = le16_to_cpu(mgmt->u.probe_resp.beacon_int); tmp.pub.capability = le16_to_cpu(mgmt->u.probe_resp.capab_info); @@ -1409,7 +1408,7 @@ ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, if (buf) { memset(&iwe, 0, sizeof(iwe)); iwe.cmd = IWEVCUSTOM; - sprintf(buf, "tsf=%016llx", (unsigned long long)(bss->pub.tsf)); + sprintf(buf, "tsf=%016llx", (unsigned long long)(ies->tsf)); iwe.u.data.length = strlen(buf); current_ev = iwe_stream_add_point(info, current_ev, end_buf, &iwe, buf); -- cgit v0.10.2 From ef429dadf33feeb150098dbe84ccaa877e3261f6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 5 Feb 2013 17:48:40 +0100 Subject: mac80211: introduce beacon-only timing data In order to be able to predict the next DTIM TBTT in the driver, add the ability to use timing data from beacons only with the new hardware flag IEEE80211_HW_TIMING_BEACON_ONLY and the BSS info value sync_dtim_count which is only valid if the timing data came from a beacon. The data can only come from a beacon, and if no beacon was received before association it is updated later together with the DTIM count notification. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 46e08ba..b9e0246 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -277,9 +277,16 @@ enum ieee80211_rssi_event { * valid in station mode only if after the driver was notified * with the %BSS_CHANGED_DTIM_PERIOD flag, will be non-zero then. * @sync_tsf: last beacon's/probe response's TSF timestamp (could be old - * as it may have been received during scanning long ago) + * as it may have been received during scanning long ago). If the + * HW flag %IEEE80211_HW_TIMING_BEACON_ONLY is set, then this can + * only come from a beacon, but might not become valid until after + * association when a beacon is received (which is notified with the + * %BSS_CHANGED_DTIM flag.) * @sync_device_ts: the device timestamp corresponding to the sync_tsf, * the driver/device can use this to calculate synchronisation + * (see @sync_tsf) + * @sync_dtim_count: Only valid when %IEEE80211_HW_TIMING_BEACON_ONLY + * is requested, see @sync_tsf/@sync_device_ts. * @beacon_int: beacon interval * @assoc_capability: capabilities taken from assoc resp * @basic_rates: bitmap of basic rates, each bit stands for an @@ -331,6 +338,7 @@ struct ieee80211_bss_conf { u16 assoc_capability; u64 sync_tsf; u32 sync_device_ts; + u8 sync_dtim_count; u32 basic_rates; int mcast_rate[IEEE80211_NUM_BANDS]; u16 ht_operation_mode; @@ -1371,6 +1379,9 @@ struct ieee80211_tx_control { * @IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF: Use the P2P Device address for any * P2P Interface. This will be honoured even if more than one interface * is supported. + * + * @IEEE80211_HW_TIMING_BEACON_ONLY: Use sync timing from beacon frames + * only, to allow getting TBTT of a DTIM beacon. */ enum ieee80211_hw_flags { IEEE80211_HW_HAS_RATE_CONTROL = 1<<0, @@ -1399,6 +1410,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, + IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; /** diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8e884fc..d794856 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -86,7 +86,7 @@ struct ieee80211_fragment_entry { struct ieee80211_bss { - u32 device_ts; + u32 device_ts_beacon, device_ts_presp; bool wmm_used; bool uapsd_supported; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 51eca5a..a29d09c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2567,6 +2567,17 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ieee80211_rx_bss_info(sdata, mgmt, len, rx_status, &elems); ifmgd->assoc_data->have_beacon = true; ifmgd->assoc_data->need_beacon = false; + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + sdata->vif.bss_conf.sync_device_ts = + rx_status->device_timestamp; + if (elems.tim) + sdata->vif.bss_conf.sync_dtim_count = + elems.tim->dtim_count; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; run_again(ifmgd, ifmgd->assoc_data->timeout); @@ -2725,7 +2736,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, /* * If we haven't had a beacon before, tell the driver about the - * DTIM period now. + * DTIM period (and beacon timing if desired) now. */ if (!bss_conf->dtim_period) { /* a few bogus AP send dtim_period = 0 or no TIM IE */ @@ -2733,6 +2744,19 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, bss_conf->dtim_period = elems.tim->dtim_period ?: 1; else bss_conf->dtim_period = 1; + + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = + le64_to_cpu(mgmt->u.beacon.timestamp); + sdata->vif.bss_conf.sync_device_ts = + rx_status->device_timestamp; + if (elems.tim) + sdata->vif.bss_conf.sync_dtim_count = + elems.tim->dtim_count; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } + changed |= BSS_CHANGED_DTIM_PERIOD; } @@ -3712,10 +3736,33 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, /* set timing information */ sdata->vif.bss_conf.beacon_int = cbss->beacon_interval; rcu_read_lock(); - ies = rcu_dereference(cbss->ies); - sdata->vif.bss_conf.sync_tsf = ies->tsf; + ies = rcu_dereference(cbss->beacon_ies); + if (ies) { + const u8 *tim_ie; + + sdata->vif.bss_conf.sync_tsf = ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_beacon; + tim_ie = cfg80211_find_ie(WLAN_EID_TIM, + ies->data, ies->len); + if (tim_ie && tim_ie[1] >= 2) + sdata->vif.bss_conf.sync_dtim_count = tim_ie[2]; + else + sdata->vif.bss_conf.sync_dtim_count = 0; + } else if (!(local->hw.flags & + IEEE80211_HW_TIMING_BEACON_ONLY)) { + ies = rcu_dereference(cbss->proberesp_ies); + /* must be non-NULL since beacon IEs were NULL */ + sdata->vif.bss_conf.sync_tsf = ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_presp; + sdata->vif.bss_conf.sync_dtim_count = 0; + } else { + sdata->vif.bss_conf.sync_tsf = 0; + sdata->vif.bss_conf.sync_device_ts = 0; + sdata->vif.bss_conf.sync_dtim_count = 0; + } rcu_read_unlock(); - sdata->vif.bss_conf.sync_device_ts = bss->device_ts; /* tell driver about BSSID, basic rates and timing */ ieee80211_bss_info_change_notify(sdata, @@ -4041,13 +4088,23 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, beacon_ies->data, beacon_ies->len); + u8 dtim_count = 0; + if (tim_ie && tim_ie[1] >= sizeof(struct ieee80211_tim_ie)) { const struct ieee80211_tim_ie *tim; tim = (void *)(tim_ie + 2); ifmgd->dtim_period = tim->dtim_period; + dtim_count = tim->dtim_count; } assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + + if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { + sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; + sdata->vif.bss_conf.sync_device_ts = + bss->device_ts_beacon; + sdata->vif.bss_conf.sync_dtim_count = dtim_count; + } } else { assoc_data->timeout = jiffies; } diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 400153f..edd47d9 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -80,7 +80,10 @@ ieee80211_bss_info_update(struct ieee80211_local *local, bss = (void *)cbss->priv; - bss->device_ts = rx_status->device_timestamp; + if (beacon) + bss->device_ts_beacon = rx_status->device_timestamp; + else + bss->device_ts_presp = rx_status->device_timestamp; if (elems->parse_error) { if (beacon) diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index a2ca72c..0bdd7ae 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -340,6 +340,7 @@ TRACE_EVENT(drv_bss_info_changed, __field(u16, assoc_cap) __field(u64, sync_tsf) __field(u32, sync_device_ts) + __field(u8, sync_dtim_count) __field(u32, basic_rates) __array(int, mcast_rate, IEEE80211_NUM_BANDS) __field(u16, ht_operation_mode) @@ -379,6 +380,7 @@ TRACE_EVENT(drv_bss_info_changed, __entry->assoc_cap = info->assoc_capability; __entry->sync_tsf = info->sync_tsf; __entry->sync_device_ts = info->sync_device_ts; + __entry->sync_dtim_count = info->sync_dtim_count; __entry->basic_rates = info->basic_rates; memcpy(__entry->mcast_rate, info->mcast_rate, sizeof(__entry->mcast_rate)); -- cgit v0.10.2 From 09b85568c142fc1c776dea86a24fcb05f0eeb48b Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Feb 2013 23:07:41 +0100 Subject: mac80211: remove dynamic PS driver interface The functions were added for some sort of Bluetooth coexistence, but aren't used, so remove them again. Reviewed-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b9e0246..8d25769 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1695,15 +1695,6 @@ void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb); * dynamic PS feature in stack and will just keep %IEEE80211_CONF_PS * enabled whenever user has enabled powersave. * - * Some hardware need to toggle a single shared antenna between WLAN and - * Bluetooth to facilitate co-existence. These types of hardware set - * limitations on the use of host controlled dynamic powersave whenever there - * is simultaneous WLAN and Bluetooth traffic. For these types of hardware, the - * driver may request temporarily going into full power save, in order to - * enable toggling the antenna between BT and WLAN. If the driver requests - * disabling dynamic powersave, the @dynamic_ps_timeout value will be - * temporarily set to zero until the driver re-enables dynamic powersave. - * * Driver informs U-APSD client support by enabling * %IEEE80211_HW_SUPPORTS_UAPSD flag. The mode is configured through the * uapsd paramater in conf_tx() operation. Hardware needs to send the QoS @@ -3939,36 +3930,6 @@ void ieee80211_connection_loss(struct ieee80211_vif *vif); void ieee80211_resume_disconnect(struct ieee80211_vif *vif); /** - * ieee80211_disable_dyn_ps - force mac80211 to temporarily disable dynamic psm - * - * @vif: &struct ieee80211_vif pointer from the add_interface callback. - * - * Some hardware require full power save to manage simultaneous BT traffic - * on the WLAN frequency. Full PSM is required periodically, whenever there are - * burst of BT traffic. The hardware gets information of BT traffic via - * hardware co-existence lines, and consequentially requests mac80211 to - * (temporarily) enter full psm. - * This function will only temporarily disable dynamic PS, not enable PSM if - * it was not already enabled. - * The driver must make sure to re-enable dynamic PS using - * ieee80211_enable_dyn_ps() if the driver has disabled it. - * - */ -void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif); - -/** - * ieee80211_enable_dyn_ps - restore dynamic psm after being disabled - * - * @vif: &struct ieee80211_vif pointer from the add_interface callback. - * - * This function restores dynamic PS after being temporarily disabled via - * ieee80211_disable_dyn_ps(). Each ieee80211_disable_dyn_ps() call must - * be coupled with an eventual call to this function. - * - */ -void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif); - -/** * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring * rssi threshold triggered * diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d794856..fafeb30 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1099,8 +1099,6 @@ struct ieee80211_local { * this will override whatever chosen by mac80211 internally. */ int dynamic_ps_forced_timeout; - int dynamic_ps_user_timeout; - bool disable_dynamic_ps; int user_power_level; /* in dBm, for all interfaces */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a29d09c..1e7662c 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -951,39 +951,6 @@ static u32 ieee80211_handle_pwr_constr(struct ieee80211_sub_if_data *sdata, return 0; } -void ieee80211_enable_dyn_ps(struct ieee80211_vif *vif) -{ - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct ieee80211_conf *conf = &local->hw.conf; - - WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || - !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || - (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); - - local->disable_dynamic_ps = false; - conf->dynamic_ps_timeout = local->dynamic_ps_user_timeout; -} -EXPORT_SYMBOL(ieee80211_enable_dyn_ps); - -void ieee80211_disable_dyn_ps(struct ieee80211_vif *vif) -{ - struct ieee80211_sub_if_data *sdata = vif_to_sdata(vif); - struct ieee80211_local *local = sdata->local; - struct ieee80211_conf *conf = &local->hw.conf; - - WARN_ON(sdata->vif.type != NL80211_IFTYPE_STATION || - !(local->hw.flags & IEEE80211_HW_SUPPORTS_PS) || - (local->hw.flags & IEEE80211_HW_SUPPORTS_DYNAMIC_PS)); - - local->disable_dynamic_ps = true; - conf->dynamic_ps_timeout = 0; - del_timer_sync(&local->dynamic_ps_timer); - ieee80211_queue_work(&local->hw, - &local->dynamic_ps_enable_work); -} -EXPORT_SYMBOL(ieee80211_disable_dyn_ps); - /* powersave */ static void ieee80211_enable_ps(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) @@ -1086,7 +1053,6 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) } if (count == 1 && ieee80211_powersave_allowed(found)) { - struct ieee80211_conf *conf = &local->hw.conf; s32 beaconint_us; if (latency < 0) @@ -1110,10 +1076,7 @@ void ieee80211_recalc_ps(struct ieee80211_local *local, s32 latency) else timeout = 100; } - local->dynamic_ps_user_timeout = timeout; - if (!local->disable_dynamic_ps) - conf->dynamic_ps_timeout = - local->dynamic_ps_user_timeout; + local->hw.conf.dynamic_ps_timeout = timeout; if (beaconint_us > latency) { local->ps_sdata = NULL; @@ -1183,8 +1146,7 @@ void ieee80211_dynamic_ps_enable_work(struct work_struct *work) if (local->hw.conf.flags & IEEE80211_CONF_PS) return; - if (!local->disable_dynamic_ps && - local->hw.conf.dynamic_ps_timeout > 0) { + if (local->hw.conf.dynamic_ps_timeout > 0) { /* don't enter PS if TX frames are pending */ if (drv_tx_frames_pending(local)) { mod_timer(&local->dynamic_ps_timer, jiffies + -- cgit v0.10.2 From f1e3e0515646dd0f4c783c1c39839d2706501344 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 6 Feb 2013 23:57:57 +0100 Subject: mac80211: remove IEEE80211_HW_SCAN_WHILE_IDLE There are only a few drivers that use HW scan, and all of those don't need a non-idle transition before starting the scan -- some don't even care about idle at all. Remove the flag and code associated with it. The only driver that really actually needed this is wl1251 and it can just do it itself in the hw_scan callback -- implement that. Acked-by: Luciano Coelho Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlwifi/dvm/mac80211.c b/drivers/net/wireless/iwlwifi/dvm/mac80211.c index 75f6f6c..0fccf72 100644 --- a/drivers/net/wireless/iwlwifi/dvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/dvm/mac80211.c @@ -151,8 +151,7 @@ int iwlagn_mac_setup_register(struct iwl_priv *priv, IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | - IEEE80211_HW_WANT_MONITOR_VIF | - IEEE80211_HW_SCAN_WHILE_IDLE; + IEEE80211_HW_WANT_MONITOR_VIF; hw->offchannel_tx_hw_queue = IWL_AUX_QUEUE; hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FMT; diff --git a/drivers/net/wireless/iwlwifi/mvm/mac80211.c b/drivers/net/wireless/iwlwifi/mvm/mac80211.c index ce6127c..bbb8a5b 100644 --- a/drivers/net/wireless/iwlwifi/mvm/mac80211.c +++ b/drivers/net/wireless/iwlwifi/mvm/mac80211.c @@ -113,7 +113,6 @@ int iwl_mvm_mac_setup_register(struct iwl_mvm *mvm) IEEE80211_HW_REPORTS_TX_ACK_STATUS | IEEE80211_HW_QUEUE_CONTROL | IEEE80211_HW_WANT_MONITOR_VIF | - IEEE80211_HW_SCAN_WHILE_IDLE | IEEE80211_HW_NEED_DTIM_BEFORE_ASSOC | IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS | diff --git a/drivers/net/wireless/ti/wl1251/event.c b/drivers/net/wireless/ti/wl1251/event.c index 5ec50a4..74ae8e1 100644 --- a/drivers/net/wireless/ti/wl1251/event.c +++ b/drivers/net/wireless/ti/wl1251/event.c @@ -29,6 +29,8 @@ static int wl1251_event_scan_complete(struct wl1251 *wl, struct event_mailbox *mbox) { + int ret = 0; + wl1251_debug(DEBUG_EVENT, "status: 0x%x, channels: %d", mbox->scheduled_scan_status, mbox->scheduled_scan_channels); @@ -37,9 +39,11 @@ static int wl1251_event_scan_complete(struct wl1251 *wl, ieee80211_scan_completed(wl->hw, false); wl1251_debug(DEBUG_MAC80211, "mac80211 hw scan completed"); wl->scanning = false; + if (wl->hw->conf.flags & IEEE80211_CONF_IDLE) + ret = wl1251_ps_set_mode(wl, STATION_IDLE); } - return 0; + return ret; } static void wl1251_event_mbox_dump(struct event_mailbox *mbox) diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index f47e8b0..bbbf68c 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -623,7 +623,7 @@ static int wl1251_op_config(struct ieee80211_hw *hw, u32 changed) } } - if (changed & IEEE80211_CONF_CHANGE_IDLE) { + if (changed & IEEE80211_CONF_CHANGE_IDLE && !wl->scanning) { if (conf->flags & IEEE80211_CONF_IDLE) { ret = wl1251_ps_set_mode(wl, STATION_IDLE); if (ret < 0) @@ -895,11 +895,21 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, if (ret < 0) goto out; + if (hw->conf.flags & IEEE80211_CONF_IDLE) { + ret = wl1251_ps_set_mode(wl, STATION_ACTIVE_MODE); + if (ret < 0) + goto out_sleep; + ret = wl1251_join(wl, wl->bss_type, wl->channel, + wl->beacon_int, wl->dtim_period); + if (ret < 0) + goto out_sleep; + } + skb = ieee80211_probereq_get(wl->hw, wl->vif, ssid, ssid_len, req->ie_len); if (!skb) { ret = -ENOMEM; - goto out; + goto out_idle; } if (req->ie_len) memcpy(skb_put(skb, req->ie_len), req->ie, req->ie_len); @@ -908,11 +918,11 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, skb->len); dev_kfree_skb(skb); if (ret < 0) - goto out_sleep; + goto out_idle; ret = wl1251_cmd_trigger_scan_to(wl, 0); if (ret < 0) - goto out_sleep; + goto out_idle; wl->scanning = true; @@ -920,9 +930,13 @@ static int wl1251_op_hw_scan(struct ieee80211_hw *hw, req->n_channels, WL1251_SCAN_NUM_PROBES); if (ret < 0) { wl->scanning = false; - goto out_sleep; + goto out_idle; } + goto out_sleep; +out_idle: + if (hw->conf.flags & IEEE80211_CONF_IDLE) + ret = wl1251_ps_set_mode(wl, STATION_IDLE); out_sleep: wl1251_ps_elp_sleep(wl); diff --git a/drivers/net/wireless/ti/wlcore/main.c b/drivers/net/wireless/ti/wlcore/main.c index 28a3757..2c2ff3e 100644 --- a/drivers/net/wireless/ti/wlcore/main.c +++ b/drivers/net/wireless/ti/wlcore/main.c @@ -5636,7 +5636,6 @@ static int wl1271_init_ieee80211(struct wl1271 *wl) IEEE80211_HW_AP_LINK_PS | IEEE80211_HW_AMPDU_AGGREGATION | IEEE80211_HW_TX_AMPDU_SETUP_IN_HW | - IEEE80211_HW_SCAN_WHILE_IDLE | IEEE80211_HW_QUEUE_CONTROL; wl->hw->wiphy->cipher_suites = cipher_suites; diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 8d25769..86ad2c3 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1363,10 +1363,6 @@ struct ieee80211_tx_control { * setup strictly in HW. mac80211 should not attempt to do this in * software. * - * @IEEE80211_HW_SCAN_WHILE_IDLE: The device can do hw scan while - * being idle (i.e. mac80211 doesn't have to go idle-off during the - * the scan). - * * @IEEE80211_HW_WANT_MONITOR_VIF: The driver would like to be informed of * a virtual monitor interface when monitor interfaces are the only * active interfaces. @@ -1408,7 +1404,6 @@ enum ieee80211_hw_flags { IEEE80211_HW_SUPPORTS_PER_STA_GTK = 1<<21, IEEE80211_HW_AP_LINK_PS = 1<<22, IEEE80211_HW_TX_AMPDU_SETUP_IN_HW = 1<<23, - IEEE80211_HW_SCAN_WHILE_IDLE = 1<<24, IEEE80211_HW_P2P_DEV_ADDR_FOR_INTF = 1<<25, IEEE80211_HW_TIMING_BEACON_ONLY = 1<<26, }; diff --git a/net/mac80211/debugfs.c b/net/mac80211/debugfs.c index 8e604099..b0e32d6 100644 --- a/net/mac80211/debugfs.c +++ b/net/mac80211/debugfs.c @@ -151,8 +151,6 @@ static ssize_t hwflags_read(struct file *file, char __user *user_buf, sf += snprintf(buf + sf, mxln - sf, "AP_LINK_PS\n"); if (local->hw.flags & IEEE80211_HW_TX_AMPDU_SETUP_IN_HW) sf += snprintf(buf + sf, mxln - sf, "TX_AMPDU_SETUP_IN_HW\n"); - if (local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE) - sf += snprintf(buf + sf, mxln - sf, "SCAN_WHILE_IDLE\n"); rv = simple_read_from_buffer(user_buf, count, ppos, buf, strlen(buf)); kfree(buf); diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index deb78e8..3ece8eb 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -151,12 +151,8 @@ static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) } } - sdata = rcu_dereference_protected(local->scan_sdata, - lockdep_is_held(&local->mtx)); - if (sdata && !(local->hw.flags & IEEE80211_HW_SCAN_WHILE_IDLE)) { - scanning = true; - sdata->vif.bss_conf.idle = false; - } + scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || + test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); list_for_each_entry(sdata, &local->interfaces, list) { if (sdata->vif.type == NL80211_IFTYPE_MONITOR || diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 2220331..38b3468 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -696,9 +696,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return -EINVAL; #endif - if ((hw->flags & IEEE80211_HW_SCAN_WHILE_IDLE) && !local->ops->hw_scan) - return -EINVAL; - if (!local->use_chanctx) { for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { const struct ieee80211_iface_combination *comb; -- cgit v0.10.2 From fd0f979a1b67f0889aea24a7c7d2a54d6706a1cf Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 00:14:51 +0100 Subject: mac80211: simplify idle handling Now that we have channel contexts, idle is (pretty much) equivalent to not having a channel context. Change the code to use this relation so that there no longer is a need for a lot of idle recalculate calls everywhere. Signed-off-by: Johannes Berg diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index b5b5076..038f249 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -91,6 +91,10 @@ ieee80211_new_chanctx(struct ieee80211_local *local, list_add_rcu(&ctx->list, &local->chanctx_list); + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); + return ctx; } @@ -110,6 +114,10 @@ static void ieee80211_free_chanctx(struct ieee80211_local *local, list_del_rcu(&ctx->list); kfree_rcu(ctx, rcu_head); + + mutex_lock(&local->mtx); + ieee80211_recalc_idle(local); + mutex_unlock(&local->mtx); } static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, @@ -128,6 +136,8 @@ static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ctx->refcount++; ieee80211_recalc_txpower(sdata); + sdata->vif.bss_conf.idle = false; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); return 0; } @@ -175,6 +185,9 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ctx->refcount--; rcu_assign_pointer(sdata->vif.chanctx_conf, NULL); + sdata->vif.bss_conf.idle = true; + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + drv_unassign_vif_chanctx(local, sdata, ctx); if (ctx->refcount > 0) { diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 055fa94..2db1f2b 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -1108,10 +1108,6 @@ int ieee80211_ibss_join(struct ieee80211_sub_if_data *sdata, mutex_unlock(&sdata->u.ibss.mtx); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - /* * 802.11n-2009 9.13.3.1: In an IBSS, the HT Protection field is * reserved, but an HT STA shall protect HT transmissions as though @@ -1209,9 +1205,5 @@ int ieee80211_ibss_leave(struct ieee80211_sub_if_data *sdata) mutex_unlock(&sdata->u.ibss.mtx); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&local->mtx); - return 0; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index fafeb30..5635dfc 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -689,9 +689,6 @@ struct ieee80211_sub_if_data { char name[IFNAMSIZ]; - /* to detect idle changes */ - bool old_idle; - /* Fragment table for host-based reassembly */ struct ieee80211_fragment_entry fragments[IEEE80211_FRAGMENT_MAX]; unsigned int fragment_next; diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 3ece8eb..40ff030 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -78,8 +78,7 @@ void ieee80211_recalc_txpower(struct ieee80211_sub_if_data *sdata) ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_TXPOWER); } -static u32 ieee80211_idle_off(struct ieee80211_local *local, - const char *reason) +static u32 ieee80211_idle_off(struct ieee80211_local *local) { if (!(local->hw.conf.flags & IEEE80211_CONF_IDLE)) return 0; @@ -99,106 +98,45 @@ static u32 ieee80211_idle_on(struct ieee80211_local *local) return IEEE80211_CONF_CHANGE_IDLE; } -static u32 __ieee80211_recalc_idle(struct ieee80211_local *local) +void ieee80211_recalc_idle(struct ieee80211_local *local) { - struct ieee80211_sub_if_data *sdata; - int count = 0; - bool working = false, scanning = false; + bool working = false, scanning, active; unsigned int led_trig_start = 0, led_trig_stop = 0; struct ieee80211_roc_work *roc; + u32 change; -#ifdef CONFIG_PROVE_LOCKING - WARN_ON(debug_locks && !lockdep_rtnl_is_held() && - !lockdep_is_held(&local->iflist_mtx)); -#endif lockdep_assert_held(&local->mtx); - list_for_each_entry(sdata, &local->interfaces, list) { - if (!ieee80211_sdata_running(sdata)) { - sdata->vif.bss_conf.idle = true; - continue; - } - - sdata->old_idle = sdata->vif.bss_conf.idle; - - /* do not count disabled managed interfaces */ - if (sdata->vif.type == NL80211_IFTYPE_STATION && - !sdata->u.mgd.associated && - !sdata->u.mgd.auth_data && - !sdata->u.mgd.assoc_data) { - sdata->vif.bss_conf.idle = true; - continue; - } - /* do not count unused IBSS interfaces */ - if (sdata->vif.type == NL80211_IFTYPE_ADHOC && - !sdata->u.ibss.ssid_len) { - sdata->vif.bss_conf.idle = true; - continue; - } - - if (sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) - continue; - - /* count everything else */ - sdata->vif.bss_conf.idle = false; - count++; - } + active = !list_empty(&local->chanctx_list); if (!local->ops->remain_on_channel) { list_for_each_entry(roc, &local->roc_list, list) { working = true; - roc->sdata->vif.bss_conf.idle = false; + break; } } scanning = test_bit(SCAN_SW_SCANNING, &local->scanning) || test_bit(SCAN_ONCHANNEL_SCANNING, &local->scanning); - list_for_each_entry(sdata, &local->interfaces, list) { - if (sdata->vif.type == NL80211_IFTYPE_MONITOR || - sdata->vif.type == NL80211_IFTYPE_AP_VLAN || - sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE) - continue; - if (sdata->old_idle == sdata->vif.bss_conf.idle) - continue; - if (!ieee80211_sdata_running(sdata)) - continue; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); - } - if (working || scanning) led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_WORK; else led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_WORK; - if (count) + if (active) led_trig_start |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; else led_trig_stop |= IEEE80211_TPT_LEDTRIG_FL_CONNECTED; ieee80211_mod_tpt_led_trig(local, led_trig_start, led_trig_stop); - if (working) - return ieee80211_idle_off(local, "working"); - if (scanning) - return ieee80211_idle_off(local, "scanning"); - if (!count) - return ieee80211_idle_on(local); + if (working || scanning || active) + change = ieee80211_idle_off(local); else - return ieee80211_idle_off(local, "in use"); - - return 0; -} - -void ieee80211_recalc_idle(struct ieee80211_local *local) -{ - u32 chg; - - mutex_lock(&local->iflist_mtx); - chg = __ieee80211_recalc_idle(local); - mutex_unlock(&local->iflist_mtx); - if (chg) - ieee80211_hw_config(local, chg); + change = ieee80211_idle_on(local); + if (change) + ieee80211_hw_config(local, change); } static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) @@ -692,10 +630,6 @@ int ieee80211_do_open(struct wireless_dev *wdev, bool coming_up) if (sdata->flags & IEEE80211_SDATA_PROMISC) atomic_inc(&local->iff_promiscs); - mutex_lock(&local->mtx); - hw_reconf_flags |= __ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - if (coming_up) local->open_count++; @@ -888,10 +822,6 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, sdata->bss = NULL; - mutex_lock(&local->mtx); - hw_reconf_flags |= __ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - ieee80211_recalc_ps(local, -1); if (local->open_count == 0) { diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 1e7662c..3bcf393 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1792,7 +1792,6 @@ EXPORT_SYMBOL(ieee80211_ap_probereq_get); static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; - struct ieee80211_local *local = sdata->local; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; mutex_lock(&ifmgd->mtx); @@ -1812,10 +1811,6 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) * but that's not a problem. */ cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); } static void ieee80211_beacon_connection_loss_work(struct work_struct *work) @@ -2048,10 +2043,6 @@ ieee80211_rx_mgmt_deauth(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, 0, 0, false, NULL); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return RX_MGMT_CFG80211_DEAUTH; } @@ -2079,10 +2070,6 @@ ieee80211_rx_mgmt_disassoc(struct ieee80211_sub_if_data *sdata, ieee80211_set_disassoc(sdata, 0, 0, false, NULL); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return RX_MGMT_CFG80211_DISASSOC; } @@ -2839,7 +2826,6 @@ static void ieee80211_sta_timer(unsigned long data) static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, u8 *bssid, u8 reason, bool tx) { - struct ieee80211_local *local = sdata->local; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; u8 frame_buf[IEEE80211_DEAUTH_FRAME_LEN]; @@ -2853,10 +2839,6 @@ static void ieee80211_sta_connection_lost(struct ieee80211_sub_if_data *sdata, */ cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); - mutex_lock(&ifmgd->mtx); } @@ -3127,10 +3109,6 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } mutex_unlock(&ifmgd->mtx); - - mutex_lock(&local->mtx); - ieee80211_recalc_idle(local); - mutex_unlock(&local->mtx); } static void ieee80211_sta_bcn_mon_timer(unsigned long data) @@ -3644,10 +3622,6 @@ static int ieee80211_prep_connection(struct ieee80211_sub_if_data *sdata, return -ENOMEM; } - mutex_lock(&local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&local->mtx); - if (new_sta) { u32 rates = 0, basic_rates = 0; bool have_higher_than_11mbit; @@ -4138,10 +4112,6 @@ int ieee80211_mgd_deauth(struct ieee80211_sub_if_data *sdata, mutex_unlock(&ifmgd->mtx); out: - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - if (sent_frame) __cfg80211_send_deauth(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); @@ -4182,10 +4152,6 @@ int ieee80211_mgd_disassoc(struct ieee80211_sub_if_data *sdata, __cfg80211_send_disassoc(sdata->dev, frame_buf, IEEE80211_DEAUTH_FRAME_LEN); - mutex_lock(&sdata->local->mtx); - ieee80211_recalc_idle(sdata->local); - mutex_unlock(&sdata->local->mtx); - return 0; } -- cgit v0.10.2 From 3e4d40fa118e58ce51e85015587a944ec5c69400 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 17:19:08 +0100 Subject: mac80211: remove unused code to mark AP station authenticated When we get to association, the AP station already exists and is marked authenticated, so moving it into IEEE80211_STA_AUTH again is a NOP, remove it. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 3bcf393..76cacdb 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2212,9 +2212,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.wmm_param) set_sta_flag(sta, WLAN_STA_WME); - err = sta_info_move_state(sta, IEEE80211_STA_AUTH); - if (!err) - err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); + err = sta_info_move_state(sta, IEEE80211_STA_ASSOC); if (!err && !(ifmgd->flags & IEEE80211_STA_CONTROL_PORT)) err = sta_info_move_state(sta, IEEE80211_STA_AUTHORIZED); if (err) { -- cgit v0.10.2 From d786f67e5c587a4de8245336cb64cf4dd06871a7 Mon Sep 17 00:00:00 2001 From: Jonas Gorski Date: Fri, 8 Feb 2013 16:07:25 +0100 Subject: mwl8k: fix band for supported channels The band field for the supported channels were left unpopulated, making them default to 0 == IEEE80211_BAND_2GHZ, even for the 5GHz channels. This resulted in null pointer accesses if anything tries to access wiphy->bands[channel->band] of a 5GHz channel on 5GHz only cards, since wiphy->bands[2GHZ] is NULL for them (e.g. cfg80211_chandef_usable does). Example kernel OOPS: [ 665.669993] Unable to handle kernel NULL pointer dereference at virtual address 00000016 [ 665.678194] pgd = c6d58000 [ 665.680941] [00000016] *pgd=06f8a831, *pte=00000000, *ppte=00000000 [ 665.687303] Internal error: Oops: 17 [#1] (...) [ 666.116373] Backtrace: [ 666.118866] [] (cfg80211_chandef_usable+0x0/0x1bc [cfg80211]) from [] (nl80211_leave_mesh+0x244/0x264 [cfg80211]) [ 666.130919] r7:c6d12100 r6:0000143c r5:c0611c48 r4:c0611b98 [ 666.136668] [] (nl80211_leave_mesh+0x164/0x264 [cfg80211]) from [] (nl80211_remain_on_channel+0x2a0/0x358 [cfg80211]) [ 666.149074] r7:c6d12000 r6:c6d12000 r5:c6f4f368 r4:00000003 [ 666.154814] [] (nl80211_remain_on_channel+0x240/0x358 [cfg80211]) from [] (nl80211_set_wiphy+0x264/0x560 [cfg80211]) [ 666.167150] [] (nl80211_set_wiphy+0x0/0x560 [cfg80211]) from [] (genl_rcv_msg+0x1b8/0x1f8) [ 666.177205] [] (genl_rcv_msg+0x0/0x1f8) from [] (netlink_rcv_skb+0x58/0xb4) [ 666.185949] [] (netlink_rcv_skb+0x0/0xb4) from [] (genl_rcv+0x20/0x2c) [ 666.194251] r6:c6f70780 r5:0000002c r4:c6f70780 r3:00000001 [ 666.199973] [] (genl_rcv+0x0/0x2c) from [] (netlink_unicast+0x154/0x1f4) [ 666.208449] r4:c785ea00 r3:c01f92fc [ 666.212057] [] (netlink_unicast+0x0/0x1f4) from [] (netlink_sendmsg+0x230/0x2b0) [ 666.221240] [] (netlink_sendmsg+0x0/0x2b0) from [] (sock_sendmsg+0x90/0xa4) [ 666.229986] [] (sock_sendmsg+0x0/0xa4) from [] (__sys_sendmsg+0x290/0x298) [ 666.238637] r9:00000000 r8:c0611ec8 r6:0000002c r5:c0610000 r4:c0611f64 [ 666.245411] [] (__sys_sendmsg+0x0/0x298) from [] (sys_sendmsg+0x44/0x6c) [ 666.253897] [] (sys_sendmsg+0x0/0x6c) from [] (ret_fast_syscall+0x0/0x2c) [ 666.262460] r6:00000000 r5:beeff96c r4:00000005 Signed-off-by: Jonas Gorski Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwl8k.c b/drivers/net/wireless/mwl8k.c index 83564d3..a00a03e 100644 --- a/drivers/net/wireless/mwl8k.c +++ b/drivers/net/wireless/mwl8k.c @@ -318,20 +318,20 @@ struct mwl8k_sta { #define MWL8K_STA(_sta) ((struct mwl8k_sta *)&((_sta)->drv_priv)) static const struct ieee80211_channel mwl8k_channels_24[] = { - { .center_freq = 2412, .hw_value = 1, }, - { .center_freq = 2417, .hw_value = 2, }, - { .center_freq = 2422, .hw_value = 3, }, - { .center_freq = 2427, .hw_value = 4, }, - { .center_freq = 2432, .hw_value = 5, }, - { .center_freq = 2437, .hw_value = 6, }, - { .center_freq = 2442, .hw_value = 7, }, - { .center_freq = 2447, .hw_value = 8, }, - { .center_freq = 2452, .hw_value = 9, }, - { .center_freq = 2457, .hw_value = 10, }, - { .center_freq = 2462, .hw_value = 11, }, - { .center_freq = 2467, .hw_value = 12, }, - { .center_freq = 2472, .hw_value = 13, }, - { .center_freq = 2484, .hw_value = 14, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2412, .hw_value = 1, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2417, .hw_value = 2, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2422, .hw_value = 3, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2427, .hw_value = 4, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2432, .hw_value = 5, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2437, .hw_value = 6, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2442, .hw_value = 7, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2447, .hw_value = 8, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2452, .hw_value = 9, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2457, .hw_value = 10, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2462, .hw_value = 11, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2467, .hw_value = 12, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2472, .hw_value = 13, }, + { .band = IEEE80211_BAND_2GHZ, .center_freq = 2484, .hw_value = 14, }, }; static const struct ieee80211_rate mwl8k_rates_24[] = { @@ -352,10 +352,10 @@ static const struct ieee80211_rate mwl8k_rates_24[] = { }; static const struct ieee80211_channel mwl8k_channels_50[] = { - { .center_freq = 5180, .hw_value = 36, }, - { .center_freq = 5200, .hw_value = 40, }, - { .center_freq = 5220, .hw_value = 44, }, - { .center_freq = 5240, .hw_value = 48, }, + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5180, .hw_value = 36, }, + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5200, .hw_value = 40, }, + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5220, .hw_value = 44, }, + { .band = IEEE80211_BAND_5GHZ, .center_freq = 5240, .hw_value = 48, }, }; static const struct ieee80211_rate mwl8k_rates_50[] = { -- cgit v0.10.2 From 7f4fe17bc2d4fd46598b03bc51281cfa7ef6abf5 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Feb 2013 14:36:03 +0100 Subject: mac80211/minstrel_ht: show the number of retries for each rate in debugfs Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/mac80211/rc80211_minstrel_ht_debugfs.c b/net/mac80211/rc80211_minstrel_ht_debugfs.c index e788f76..f2b7d26 100644 --- a/net/mac80211/rc80211_minstrel_ht_debugfs.c +++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c @@ -38,8 +38,8 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) file->private_data = ms; p = ms->buf; - p += sprintf(p, "type rate throughput ewma prob this prob " - "this succ/attempt success attempts\n"); + p += sprintf(p, "type rate throughput ewma prob this prob " + "retry this succ/attempt success attempts\n"); for (i = 0; i < MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; i++) { char htmode = '2'; char gimode = 'L'; @@ -64,18 +64,19 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; - p += sprintf(p, "MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * + p += sprintf(p, " MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * MCS_GROUP_RATES + j); tp = mr->cur_tp / 10; prob = MINSTREL_TRUNC(mr->cur_prob * 1000); eprob = MINSTREL_TRUNC(mr->probability * 1000); - p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " - "%3u(%3u) %8llu %8llu\n", + p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " + "%3u %3u(%3u) %8llu %8llu\n", tp / 10, tp % 10, eprob / 10, eprob % 10, prob / 10, prob % 10, + mr->retry_count, mr->last_success, mr->last_attempts, (unsigned long long)mr->succ_hist, -- cgit v0.10.2 From df15a6c4fa7f77511663d7b5f9134f37ad2e8c92 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Mon, 11 Feb 2013 14:36:04 +0100 Subject: mac80211/minstrel_ht: remove the sampling bypass check for the lowest rate It's more of an unnecessary micro-optimization and it prevents switching from long-GI to short-GI in HT20/single-stream for the lowest rate Signed-off-by: Felix Fietkau Signed-off-by: Johannes Berg diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 9f9c453..5bb316a 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -231,10 +231,6 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) if (!mr->cur_tp) continue; - /* ignore the lowest rate of each single-stream group */ - if (!i && minstrel_mcs_groups[group].streams == 1) - continue; - if ((mr->cur_tp > cur_prob_tp && mr->probability > MINSTREL_FRAC(3, 4)) || mr->probability > cur_prob) { mg->max_prob_rate = index; -- cgit v0.10.2 From 6c17b77b67587b9f9e3070fb89fe98cef3187131 Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 11 Feb 2013 11:21:07 -0600 Subject: mac80211: Fix tx queue handling during scans Scans currently work by stopping the netdev tx queues but leaving the mac80211 queues active. This stops the flow of incoming packets while still allowing mac80211 to transmit nullfunc and probe request frames to facilitate scanning. However, the driver may try to wake the mac80211 queues while in this state, which will also wake the netdev queues. To prevent this, add a new queue stop reason, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, to be used when stopping the tx queues for off-channel operation. This prevents the netdev queues from waking when a driver wakes the mac80211 queues. This also stops all frames from being transmitted, even those meant to be sent off-channel. Add a new tx control flag, IEEE80211_TX_CTL_OFFCHAN_TX_OK, which allows frames to be transmitted when the queues are stopped only for the off-channel stop reason. Update all locations transmitting off-channel frames to use this flag. Signed-off-by: Seth Forshee Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 86ad2c3..0eaa909 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -399,6 +399,9 @@ struct ieee80211_bss_conf { * @IEEE80211_TX_CTL_RATE_CTRL_PROBE: internal to mac80211, can be * set by rate control algorithms to indicate probe rate, will * be cleared for fragmented frames (except on the last fragment) + * @IEEE80211_TX_INTFL_OFFCHAN_TX_OK: Internal to mac80211. Used to indicate + * that a frame can be transmitted while the queues are stopped for + * off-channel operation. * @IEEE80211_TX_INTFL_NEED_TXPROCESSING: completely internal to mac80211, * used to indicate that a pending frame requires TX processing before * it can be sent out. @@ -464,6 +467,7 @@ enum mac80211_tx_control_flags { IEEE80211_TX_STAT_AMPDU = BIT(10), IEEE80211_TX_STAT_AMPDU_NO_BACK = BIT(11), IEEE80211_TX_CTL_RATE_CTRL_PROBE = BIT(12), + IEEE80211_TX_INTFL_OFFCHAN_TX_OK = BIT(13), IEEE80211_TX_INTFL_NEED_TXPROCESSING = BIT(14), IEEE80211_TX_INTFL_RETRIED = BIT(15), IEEE80211_TX_INTFL_DONT_ENCRYPT = BIT(16), diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 8f6b593..e3dec80 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -2749,7 +2749,8 @@ static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, goto out_unlock; } - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_TX_OFFCHAN | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (local->hw.flags & IEEE80211_HW_QUEUE_CONTROL) IEEE80211_SKB_CB(skb)->hw_queue = local->hw.offchannel_tx_hw_queue; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 5635dfc..76cdcfc 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -809,6 +809,7 @@ enum queue_stop_reason { IEEE80211_QUEUE_STOP_REASON_AGGREGATION, IEEE80211_QUEUE_STOP_REASON_SUSPEND, IEEE80211_QUEUE_STOP_REASON_SKB_ADD, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL, }; #ifdef CONFIG_MAC80211_LEDS diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 76cacdb..efb2276 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -685,7 +685,8 @@ void ieee80211_send_nullfunc(struct ieee80211_local *local, if (powersave) nullfunc->frame_control |= cpu_to_le16(IEEE80211_FCTL_PM); - IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT | + IEEE80211_TX_INTFL_OFFCHAN_TX_OK; if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | IEEE80211_STA_CONNECTION_POLL)) IEEE80211_SKB_CB(skb)->flags |= IEEE80211_TX_CTL_USE_MINRATE; diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 82baf5b..4c3ee3e 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -113,6 +113,10 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) * notify the AP about us leaving the channel and stop all * STA interfaces. */ + + ieee80211_stop_queues_by_reason(&local->hw, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); + mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { if (!ieee80211_sdata_running(sdata)) @@ -133,12 +137,9 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) sdata, BSS_CHANGED_BEACON_ENABLED); } - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { - netif_tx_stop_all_queues(sdata->dev); - if (sdata->vif.type == NL80211_IFTYPE_STATION && - sdata->u.mgd.associated) - ieee80211_offchannel_ps_enable(sdata); - } + if (sdata->vif.type == NL80211_IFTYPE_STATION && + sdata->u.mgd.associated) + ieee80211_offchannel_ps_enable(sdata); } mutex_unlock(&local->iflist_mtx); } @@ -166,20 +167,6 @@ void ieee80211_offchannel_return(struct ieee80211_local *local) sdata->u.mgd.associated) ieee80211_offchannel_ps_disable(sdata); - if (sdata->vif.type != NL80211_IFTYPE_MONITOR) { - /* - * This may wake up queues even though the driver - * currently has them stopped. This is not very - * likely, since the driver won't have gotten any - * (or hardly any) new packets while we weren't - * on the right channel, and even if it happens - * it will at most lead to queueing up one more - * packet per queue in mac80211 rather than on - * the interface qdisc. - */ - netif_tx_wake_all_queues(sdata->dev); - } - if (test_and_clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state)) { sdata->vif.bss_conf.enable_beacon = true; @@ -188,6 +175,9 @@ void ieee80211_offchannel_return(struct ieee80211_local *local) } } mutex_unlock(&local->iflist_mtx); + + ieee80211_wake_queues_by_reason(&local->hw, + IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); } void ieee80211_handle_roc_started(struct ieee80211_roc_work *roc) diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index edd47d9..d9e2df9 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -382,6 +382,11 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, int i; struct ieee80211_sub_if_data *sdata; enum ieee80211_band band = local->hw.conf.channel->band; + u32 tx_flags; + + tx_flags = IEEE80211_TX_INTFL_OFFCHAN_TX_OK; + if (local->scan_req->no_cck) + tx_flags |= IEEE80211_TX_CTL_NO_CCK_RATE; sdata = rcu_dereference_protected(local->scan_sdata, lockdep_is_held(&local->mtx)); @@ -393,9 +398,7 @@ static void ieee80211_scan_state_send_probe(struct ieee80211_local *local, local->scan_req->ssids[i].ssid_len, local->scan_req->ie, local->scan_req->ie_len, local->scan_req->rates[band], false, - local->scan_req->no_cck ? - IEEE80211_TX_CTL_NO_CCK_RATE : 0, - local->hw.conf.channel, true); + tx_flags, local->hw.conf.channel, true); /* * After sending probe requests, wait for probe responses diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 2ef0e19b..f476aa6 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1230,6 +1230,21 @@ static bool ieee80211_tx_frags(struct ieee80211_local *local, spin_lock_irqsave(&local->queue_stop_reason_lock, flags); if (local->queue_stop_reasons[q] || (!txpending && !skb_queue_empty(&local->pending[q]))) { + if (unlikely(info->flags & + IEEE80211_TX_INTFL_OFFCHAN_TX_OK && + local->queue_stop_reasons[q] & + ~BIT(IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL))) { + /* + * Drop off-channel frames if queues are stopped + * for any reason other than off-channel + * operation. Never queue them. + */ + spin_unlock_irqrestore( + &local->queue_stop_reason_lock, flags); + ieee80211_purge_tx_queue(&local->hw, skbs); + return true; + } + /* * Since queue is stopped, queue up frames for later * transmission from the tx-pending tasklet when the -- cgit v0.10.2 From 9c35d7d2368f54313b988a01c408e5cf863ffd9e Mon Sep 17 00:00:00 2001 From: Seth Forshee Date: Mon, 11 Feb 2013 11:21:08 -0600 Subject: mac80211: Add flushes before going off-channel We've got a couple of races when enabling powersave with an AP for off-channel operation. The first is fairly simple. If we go off-channel before the nullfunc frame to enable PS is transmitted then it may not be received by the AP. Add a flush after enabling off-channel PS to prevent this from happening. The second race is a bit more subtle. If the driver supports QoS and has frames queued when the nullfunc frame is queued, those frames may get transmitted after the nullfunc frame. If PM is not set then the AP is being told that we've exited PS before we go off-channel and may try to deliver frames. To prevent this, add a flush after stopping the queues but before passing the nullfunc frame to the driver. Signed-off-by: Seth Forshee Signed-off-by: Johannes Berg diff --git a/net/mac80211/offchannel.c b/net/mac80211/offchannel.c index 4c3ee3e..cc79b4a 100644 --- a/net/mac80211/offchannel.c +++ b/net/mac80211/offchannel.c @@ -114,8 +114,13 @@ void ieee80211_offchannel_stop_vifs(struct ieee80211_local *local) * STA interfaces. */ + /* + * Stop queues and transmit all frames queued by the driver + * before sending nullfunc to enable powersave at the AP. + */ ieee80211_stop_queues_by_reason(&local->hw, IEEE80211_QUEUE_STOP_REASON_OFFCHANNEL); + drv_flush(local, false); mutex_lock(&local->iflist_mtx); list_for_each_entry(sdata, &local->interfaces, list) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index d9e2df9..6d0b89e 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -334,6 +334,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) ieee80211_offchannel_stop_vifs(local); + /* ensure nullfunc is transmitted before leaving operating channel */ + drv_flush(local, false); + ieee80211_configure_filter(local); /* We need to set power level at maximum rate for scanning. */ -- cgit v0.10.2 From b6a7bceb3b9315478657bc55884dfdcd104c9864 Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Mon, 11 Feb 2013 23:56:40 -0800 Subject: nl80211: minor correction in sample wowlan mask calculation The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where xx indicates "don't care") should be represented by a pattern of twelve zero bytes, and a mask of "0xed,0x01", not "0xed,0x07". mask_len = (pat_len + 7) / 8 = (12 + 7) / 8 = 2 Hence the mask will be of 2 bytes. Replace each valid byte in pattern by 1 and don't care byte by 0: 10110111 1000 (0000) 1st byte of pattern corresponds to lower order bit in first byte of mask. And 9th byte of pattern corresponds to lower order bit in second byte of mask. With this logic the mask will be 11101101 00000001 = 0xed 0x01 Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao Signed-off-by: Johannes Berg diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 9a2ecdc..b233211 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2906,7 +2906,7 @@ enum nl80211_tx_power_setting { * corresponds to the lowest-order bit in the second byte of the mask. * For example: The match 00:xx:00:00:xx:00:00:00:00:xx:xx:xx (where * xx indicates "don't care") would be represented by a pattern of - * twelve zero bytes, and a mask of "0xed,0x07". + * twelve zero bytes, and a mask of "0xed,0x01". * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. -- cgit v0.10.2 From 66d575705154525c33ab99b5f9ac2d246c348db6 Mon Sep 17 00:00:00 2001 From: Emmanuel Grumbach Date: Sun, 10 Feb 2013 15:55:20 +0200 Subject: mac80211: allow driver to be stateless wrt. SMSP requests Bail out if no update is made to the SMPS state. This allows the driver to avoid duplicating the state. Signed-off-by: Emmanuel Grumbach Signed-off-by: Johannes Berg diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 61ac7c4..9e7560b 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -406,6 +406,9 @@ void ieee80211_request_smps(struct ieee80211_vif *vif, if (WARN_ON(smps_mode == IEEE80211_SMPS_OFF)) smps_mode = IEEE80211_SMPS_AUTOMATIC; + if (sdata->u.mgd.driver_smps_mode == smps_mode) + return; + sdata->u.mgd.driver_smps_mode = smps_mode; ieee80211_queue_work(&sdata->local->hw, -- cgit v0.10.2 From c88d0dc1cc0182358ce1ae6f457dace34539eb12 Mon Sep 17 00:00:00 2001 From: Catalin Iacob Date: Mon, 11 Feb 2013 22:18:05 +0100 Subject: rtlwifi: Initialize rate_init member of struct rate_control_ops This partially reverts commit 44ba973699b831414c3f8eef68ee5a7fe1208a05. rate_control_rate_init assumes the rate_init member of struct rate_control_ops is not NULL therefore not initializing it leads to an oops as soon the driver succesfully associates to an AP. The removal of rate_update from 44ba973699b831414c3f8eef68ee5a7fe1208a05 is ok because rate_update is checked for NULL before being called. Signed-off-by: Catalin Iacob Acked-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 204f46c..6ad8bb7 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -217,6 +217,12 @@ static void rtl_tx_status(void *ppriv, } } +static void rtl_rate_init(void *ppriv, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta, void *priv_sta) +{ +} + static void *rtl_rate_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { @@ -261,6 +267,7 @@ static struct rate_control_ops rtl_rate_ops = { .free = rtl_rate_free, .alloc_sta = rtl_rate_alloc_sta, .free_sta = rtl_rate_free_sta, + .rate_init = rtl_rate_init, .tx_status = rtl_tx_status, .get_rate = rtl_get_rate, }; -- cgit v0.10.2 From bb92d19983a4b54be3e3b83441a8076d92cd04bc Mon Sep 17 00:00:00 2001 From: Amitkumar Karwar Date: Tue, 12 Feb 2013 12:16:26 -0800 Subject: nl80211: add packet offset information for wowlan pattern If user knows the location of a wowlan pattern to be matched in Rx packet, he can provide an offset with the pattern. This will help drivers to ignore initial bytes and match the pattern efficiently. Signed-off-by: Amitkumar Karwar Signed-off-by: Bing Zhao [refactor pattern sending] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 77686ca..d3a7381 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1576,6 +1576,7 @@ struct cfg80211_pmksa { * one bit per byte, in same format as nl80211 * @pattern: bytes to match where bitmask is 1 * @pattern_len: length of pattern (in bytes) + * @pkt_offset: packet offset (in bytes) * * Internal note: @mask and @pattern are allocated in one chunk of * memory, free @mask only! @@ -1583,6 +1584,7 @@ struct cfg80211_pmksa { struct cfg80211_wowlan_trig_pkt_pattern { u8 *mask, *pattern; int pattern_len; + int pkt_offset; }; /** @@ -2290,12 +2292,14 @@ enum wiphy_wowlan_support_flags { * (see nl80211.h for the pattern definition) * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern + * @max_pkt_offset: maximum Rx packet offset */ struct wiphy_wowlan_support { u32 flags; int n_patterns; int pattern_max_len; int pattern_min_len; + int max_pkt_offset; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index b233211..eb7b322 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2910,6 +2910,8 @@ enum nl80211_tx_power_setting { * Note that the pattern matching is done as though frames were not * 802.11 frames but 802.3 frames, i.e. the frame is fully unpacked * first (including SNAP header unpacking) and then matched. + * @NL80211_WOWLAN_PKTPAT_OFFSET: packet offset, pattern is matched after + * these fixed number of bytes of received packet * @NUM_NL80211_WOWLAN_PKTPAT: number of attributes * @MAX_NL80211_WOWLAN_PKTPAT: max attribute number */ @@ -2917,6 +2919,7 @@ enum nl80211_wowlan_packet_pattern_attr { __NL80211_WOWLAN_PKTPAT_INVALID, NL80211_WOWLAN_PKTPAT_MASK, NL80211_WOWLAN_PKTPAT_PATTERN, + NL80211_WOWLAN_PKTPAT_OFFSET, NUM_NL80211_WOWLAN_PKTPAT, MAX_NL80211_WOWLAN_PKTPAT = NUM_NL80211_WOWLAN_PKTPAT - 1, @@ -2927,6 +2930,7 @@ enum nl80211_wowlan_packet_pattern_attr { * @max_patterns: maximum number of patterns supported * @min_pattern_len: minimum length of each pattern * @max_pattern_len: maximum length of each pattern + * @max_pkt_offset: maximum Rx packet offset * * This struct is carried in %NL80211_WOWLAN_TRIG_PKT_PATTERN when * that is part of %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED in the @@ -2936,6 +2940,7 @@ struct nl80211_wowlan_pattern_support { __u32 max_patterns; __u32 min_pattern_len; __u32 max_pattern_len; + __u32 max_pkt_offset; } __attribute__((packed)); /** @@ -2951,9 +2956,10 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_PKT_PATTERN: wake up on the specified packet patterns * which are passed in an array of nested attributes, each nested attribute * defining a with attributes from &struct nl80211_wowlan_trig_pkt_pattern. - * Each pattern defines a wakeup packet. The matching is done on the MSDU, - * i.e. as though the packet was an 802.3 packet, so the pattern matching - * is done after the packet is converted to the MSDU. + * Each pattern defines a wakeup packet. Packet offset is associated with + * each pattern which is used while matching the pattern. The matching is + * done on the MSDU, i.e. as though the packet was an 802.3 packet, so the + * pattern matching is done after the packet is converted to the MSDU. * * In %NL80211_ATTR_WOWLAN_TRIGGERS_SUPPORTED, it is a binary attribute * carrying a &struct nl80211_wowlan_pattern_support. diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 93bc63e..cc0fad3 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1238,6 +1238,8 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.wowlan.pattern_min_len, .max_pattern_len = dev->wiphy.wowlan.pattern_max_len, + .max_pkt_offset = + dev->wiphy.wowlan.max_pkt_offset, }; if (nla_put(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN, sizeof(pat), &pat)) @@ -6895,6 +6897,39 @@ static int nl80211_leave_mesh(struct sk_buff *skb, struct genl_info *info) } #ifdef CONFIG_PM +static int nl80211_send_wowlan_patterns(struct sk_buff *msg, + struct cfg80211_registered_device *rdev) +{ + struct nlattr *nl_pats, *nl_pat; + int i, pat_len; + + if (!rdev->wowlan->n_patterns) + return 0; + + nl_pats = nla_nest_start(msg, NL80211_WOWLAN_TRIG_PKT_PATTERN); + if (!nl_pats) + return -ENOBUFS; + + for (i = 0; i < rdev->wowlan->n_patterns; i++) { + nl_pat = nla_nest_start(msg, i + 1); + if (!nl_pat) + return -ENOBUFS; + pat_len = rdev->wowlan->patterns[i].pattern_len; + if (nla_put(msg, NL80211_WOWLAN_PKTPAT_MASK, + DIV_ROUND_UP(pat_len, 8), + rdev->wowlan->patterns[i].mask) || + nla_put(msg, NL80211_WOWLAN_PKTPAT_PATTERN, + pat_len, rdev->wowlan->patterns[i].pattern) || + nla_put_u32(msg, NL80211_WOWLAN_PKTPAT_OFFSET, + rdev->wowlan->patterns[i].pkt_offset)) + return -ENOBUFS; + nla_nest_end(msg, nl_pat); + } + nla_nest_end(msg, nl_pats); + + return 0; +} + static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -6935,32 +6970,8 @@ static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) (rdev->wowlan->rfkill_release && nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE))) goto nla_put_failure; - if (rdev->wowlan->n_patterns) { - struct nlattr *nl_pats, *nl_pat; - int i, pat_len; - - nl_pats = nla_nest_start(msg, - NL80211_WOWLAN_TRIG_PKT_PATTERN); - if (!nl_pats) - goto nla_put_failure; - - for (i = 0; i < rdev->wowlan->n_patterns; i++) { - nl_pat = nla_nest_start(msg, i + 1); - if (!nl_pat) - goto nla_put_failure; - pat_len = rdev->wowlan->patterns[i].pattern_len; - if (nla_put(msg, NL80211_WOWLAN_PKTPAT_MASK, - DIV_ROUND_UP(pat_len, 8), - rdev->wowlan->patterns[i].mask) || - nla_put(msg, NL80211_WOWLAN_PKTPAT_PATTERN, - pat_len, - rdev->wowlan->patterns[i].pattern)) - goto nla_put_failure; - nla_nest_end(msg, nl_pat); - } - nla_nest_end(msg, nl_pats); - } - + if (nl80211_send_wowlan_patterns(msg, rdev)) + goto nla_put_failure; nla_nest_end(msg, nl_wowlan); } @@ -7046,7 +7057,7 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) if (tb[NL80211_WOWLAN_TRIG_PKT_PATTERN]) { struct nlattr *pat; int n_patterns = 0; - int rem, pat_len, mask_len; + int rem, pat_len, mask_len, pkt_offset; struct nlattr *pat_tb[NUM_NL80211_WOWLAN_PKTPAT]; nla_for_each_nested(pat, tb[NL80211_WOWLAN_TRIG_PKT_PATTERN], @@ -7081,6 +7092,15 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) pat_len < wowlan->pattern_min_len) goto error; + if (!pat_tb[NL80211_WOWLAN_PKTPAT_OFFSET]) + pkt_offset = 0; + else + pkt_offset = nla_get_u32( + pat_tb[NL80211_WOWLAN_PKTPAT_OFFSET]); + if (pkt_offset > wowlan->max_pkt_offset) + goto error; + new_triggers.patterns[i].pkt_offset = pkt_offset; + new_triggers.patterns[i].mask = kmalloc(mask_len + pat_len, GFP_KERNEL); if (!new_triggers.patterns[i].mask) { -- cgit v0.10.2 From 6719429dd61cde1fe30d9644d0aa2369eefc9005 Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Tue, 12 Feb 2013 20:11:38 +0200 Subject: cfg80211: check vendor IE length to avoid overrun cfg80211_find_vendor_ie() was checking only that the vendor IE would fit in the remaining IEs buffer. If a corrupt includes a vendor IE that is too small, we could potentially overrun the IEs buffer. Fix this by checking that the vendor IE fits in the reported IE length field and skip it otherwise. Reported-by: Jouni Malinen Signed-off-by: Luciano Coelho [change BUILD_BUG_ON to != 1 (from >= 2)] Signed-off-by: Johannes Berg diff --git a/net/wireless/scan.c b/net/wireless/scan.c index b7a1679..d0fc6da 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -365,14 +365,18 @@ const u8 *cfg80211_find_vendor_ie(unsigned int oui, u8 oui_type, if (!pos) return NULL; - if (end - pos < sizeof(*ie)) - return NULL; - ie = (struct ieee80211_vendor_ie *)pos; + + /* make sure we can access ie->len */ + BUILD_BUG_ON(offsetof(struct ieee80211_vendor_ie, len) != 1); + + if (ie->len < sizeof(*ie)) + goto cont; + ie_oui = ie->oui[0] << 16 | ie->oui[1] << 8 | ie->oui[2]; if (ie_oui == oui && ie->oui_type == oui_type) return pos; - +cont: pos += 2 + ie->len; } return NULL; -- cgit v0.10.2 From a0497f9f57478c5a37c5628eb32833dd9729a821 Mon Sep 17 00:00:00 2001 From: Felix Fietkau Date: Wed, 13 Feb 2013 10:51:08 +0100 Subject: mac80211/minstrel_ht: add support for using CCK rates When MCS rates start to get bad in 2.4 GHz because of long range or strong interference, CCK rates can be a lot more robust. This patch adds a pseudo MCS group containing CCK rates (long preamble in the lower 4 slots, short preamble in the upper slots). Signed-off-by: Felix Fietkau [make minstrel_ht_get_stats static] Signed-off-by: Johannes Berg diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c index 8c5acdc..eea45a2 100644 --- a/net/mac80211/rc80211_minstrel.c +++ b/net/mac80211/rc80211_minstrel.c @@ -494,6 +494,33 @@ minstrel_free_sta(void *priv, struct ieee80211_sta *sta, void *priv_sta) kfree(mi); } +static void +minstrel_init_cck_rates(struct minstrel_priv *mp) +{ + static const int bitrates[4] = { 10, 20, 55, 110 }; + struct ieee80211_supported_band *sband; + int i, j; + + sband = mp->hw->wiphy->bands[IEEE80211_BAND_2GHZ]; + if (!sband) + return; + + for (i = 0, j = 0; i < sband->n_bitrates; i++) { + struct ieee80211_rate *rate = &sband->bitrates[i]; + + if (rate->flags & IEEE80211_RATE_ERP_G) + continue; + + for (j = 0; j < ARRAY_SIZE(bitrates); j++) { + if (rate->bitrate != bitrates[j]) + continue; + + mp->cck_rates[j] = i; + break; + } + } +} + static void * minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) { @@ -539,6 +566,8 @@ minstrel_alloc(struct ieee80211_hw *hw, struct dentry *debugfsdir) S_IRUGO | S_IWUGO, debugfsdir, &mp->fixed_rate_idx); #endif + minstrel_init_cck_rates(mp); + return mp; } diff --git a/net/mac80211/rc80211_minstrel.h b/net/mac80211/rc80211_minstrel.h index 5d278ec..5ecf757 100644 --- a/net/mac80211/rc80211_minstrel.h +++ b/net/mac80211/rc80211_minstrel.h @@ -79,6 +79,8 @@ struct minstrel_priv { unsigned int lookaround_rate; unsigned int lookaround_rate_mrr; + u8 cck_rates[4]; + #ifdef CONFIG_MAC80211_DEBUGFS /* * enable fixed rate processing per RC diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 5bb316a..6e35dcd 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -1,5 +1,5 @@ /* - * Copyright (C) 2010 Felix Fietkau + * Copyright (C) 2010-2013 Felix Fietkau * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -63,6 +63,30 @@ } \ } +#define CCK_DURATION(_bitrate, _short, _len) \ + (10 /* SIFS */ + \ + (_short ? 72 + 24 : 144 + 48 ) + \ + (8 * (_len + 4) * 10) / (_bitrate)) + +#define CCK_ACK_DURATION(_bitrate, _short) \ + (CCK_DURATION((_bitrate > 10 ? 20 : 10), false, 60) + \ + CCK_DURATION(_bitrate, _short, AVG_PKT_SIZE)) + +#define CCK_DURATION_LIST(_short) \ + CCK_ACK_DURATION(10, _short), \ + CCK_ACK_DURATION(20, _short), \ + CCK_ACK_DURATION(55, _short), \ + CCK_ACK_DURATION(110, _short) + +#define CCK_GROUP \ + [MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS] = { \ + .streams = 0, \ + .duration = { \ + CCK_DURATION_LIST(false), \ + CCK_DURATION_LIST(true) \ + } \ + } + /* * To enable sufficiently targeted rate sampling, MCS rates are divided into * groups, based on the number of streams and flags (HT40, SGI) that they @@ -95,8 +119,13 @@ const struct mcs_group minstrel_mcs_groups[] = { #if MINSTREL_MAX_STREAMS >= 3 MCS_GROUP(3, 1, 1), #endif + + /* must be last */ + CCK_GROUP }; +#define MINSTREL_CCK_GROUP (ARRAY_SIZE(minstrel_mcs_groups) - 1) + static u8 sample_table[SAMPLE_COLUMNS][MCS_GROUP_RATES]; /* @@ -119,6 +148,29 @@ minstrel_ht_get_group_idx(struct ieee80211_tx_rate *rate) !!(rate->flags & IEEE80211_TX_RC_40_MHZ_WIDTH)); } +static struct minstrel_rate_stats * +minstrel_ht_get_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, + struct ieee80211_tx_rate *rate) +{ + int group, idx; + + if (rate->flags & IEEE80211_TX_RC_MCS) { + group = minstrel_ht_get_group_idx(rate); + idx = rate->idx % MCS_GROUP_RATES; + } else { + group = MINSTREL_CCK_GROUP; + + for (idx = 0; idx < ARRAY_SIZE(mp->cck_rates); idx++) + if (rate->idx == mp->cck_rates[idx]) + break; + + /* short preamble */ + if (!(mi->groups[group].supported & BIT(idx))) + idx += 4; + } + return &mi->groups[group].rates[idx]; +} + static inline struct minstrel_rate_stats * minstrel_get_ratestats(struct minstrel_ht_sta *mi, int index) { @@ -159,7 +211,7 @@ static void minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) { struct minstrel_rate_stats *mr; - unsigned int usecs; + unsigned int usecs = 0; mr = &mi->groups[group].rates[rate]; @@ -168,7 +220,9 @@ minstrel_ht_calc_tp(struct minstrel_ht_sta *mi, int group, int rate) return; } - usecs = mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); + if (group != MINSTREL_CCK_GROUP) + usecs = mi->overhead / MINSTREL_TRUNC(mi->avg_ampdu_len); + usecs += minstrel_mcs_groups[group].duration[rate]; mr->cur_tp = MINSTREL_TRUNC((1000000 / usecs) * mr->probability); } @@ -293,7 +347,7 @@ minstrel_ht_update_stats(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) } static bool -minstrel_ht_txstat_valid(struct ieee80211_tx_rate *rate) +minstrel_ht_txstat_valid(struct minstrel_priv *mp, struct ieee80211_tx_rate *rate) { if (rate->idx < 0) return false; @@ -301,7 +355,13 @@ minstrel_ht_txstat_valid(struct ieee80211_tx_rate *rate) if (!rate->count) return false; - return !!(rate->flags & IEEE80211_TX_RC_MCS); + if (rate->flags & IEEE80211_TX_RC_MCS) + return true; + + return rate->idx == mp->cck_rates[0] || + rate->idx == mp->cck_rates[1] || + rate->idx == mp->cck_rates[2] || + rate->idx == mp->cck_rates[3]; } static void @@ -386,7 +446,6 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, struct minstrel_rate_stats *rate, *rate2; struct minstrel_priv *mp = priv; bool last; - int group; int i; if (!msp->is_ht) @@ -415,13 +474,12 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, if (info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) mi->sample_packets += info->status.ampdu_len; - last = !minstrel_ht_txstat_valid(&ar[0]); + last = !minstrel_ht_txstat_valid(mp, &ar[0]); for (i = 0; !last; i++) { last = (i == IEEE80211_TX_MAX_RATES - 1) || - !minstrel_ht_txstat_valid(&ar[i + 1]); + !minstrel_ht_txstat_valid(mp, &ar[i + 1]); - group = minstrel_ht_get_group_idx(&ar[i]); - rate = &mi->groups[group].rates[ar[i].idx % 8]; + rate = minstrel_ht_get_stats(mp, mi, &ar[i]); if (last) rate->success += info->status.ampdu_ack_len; @@ -447,7 +505,8 @@ minstrel_ht_tx_status(void *priv, struct ieee80211_supported_band *sband, if (time_after(jiffies, mi->stats_update + (mp->update_interval / 2 * HZ) / 1000)) { minstrel_ht_update_stats(mp, mi); - if (!(info->flags & IEEE80211_TX_CTL_AMPDU)) + if (!(info->flags & IEEE80211_TX_CTL_AMPDU) && + mi->max_prob_rate / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) minstrel_aggr_check(sta, skb); } } @@ -463,6 +522,7 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, unsigned int ctime = 0; unsigned int t_slot = 9; /* FIXME */ unsigned int ampdu_len = MINSTREL_TRUNC(mi->avg_ampdu_len); + unsigned int overhead = 0, overhead_rtscts = 0; mr = minstrel_get_ratestats(mi, index); if (mr->probability < MINSTREL_FRAC(1, 10)) { @@ -484,9 +544,14 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, ctime += (t_slot * cw) >> 1; cw = min((cw << 1) | 1, mp->cw_max); + if (index / MCS_GROUP_RATES != MINSTREL_CCK_GROUP) { + overhead = mi->overhead; + overhead_rtscts = mi->overhead_rtscts; + } + /* Total TX time for data and Contention after first 2 tries */ - tx_time = ctime + 2 * (mi->overhead + tx_time_data); - tx_time_rtscts = ctime + 2 * (mi->overhead_rtscts + tx_time_data); + tx_time = ctime + 2 * (overhead + tx_time_data); + tx_time_rtscts = ctime + 2 * (overhead_rtscts + tx_time_data); /* See how many more tries we can fit inside segment size */ do { @@ -495,8 +560,8 @@ minstrel_calc_retransmit(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, cw = min((cw << 1) | 1, mp->cw_max); /* Total TX time after this try */ - tx_time += ctime + mi->overhead + tx_time_data; - tx_time_rtscts += ctime + mi->overhead_rtscts + tx_time_data; + tx_time += ctime + overhead + tx_time_data; + tx_time_rtscts += ctime + overhead_rtscts + tx_time_data; if (tx_time_rtscts < mp->segment_size) mr->retry_count_rtscts++; @@ -526,9 +591,16 @@ minstrel_ht_set_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, else rate->count = mr->retry_count; - rate->flags = IEEE80211_TX_RC_MCS | group->flags; + rate->flags = 0; if (rtscts) rate->flags |= IEEE80211_TX_RC_USE_RTS_CTS; + + if (index / MCS_GROUP_RATES == MINSTREL_CCK_GROUP) { + rate->idx = mp->cck_rates[index % ARRAY_SIZE(mp->cck_rates)]; + return; + } + + rate->flags |= IEEE80211_TX_RC_MCS | group->flags; rate->idx = index % MCS_GROUP_RATES + (group->streams - 1) * MCS_GROUP_RATES; } @@ -592,6 +664,22 @@ minstrel_get_sample_rate(struct minstrel_priv *mp, struct minstrel_ht_sta *mi) } static void +minstrel_ht_check_cck_shortpreamble(struct minstrel_priv *mp, + struct minstrel_ht_sta *mi, bool val) +{ + u8 supported = mi->groups[MINSTREL_CCK_GROUP].supported; + + if (!supported || !mi->cck_supported_short) + return; + + if (supported & (mi->cck_supported_short << (val * 4))) + return; + + supported ^= mi->cck_supported_short | (mi->cck_supported_short << 4); + mi->groups[MINSTREL_CCK_GROUP].supported = supported; +} + +static void minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_rate_control *txrc) { @@ -610,6 +698,7 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, return mac80211_minstrel.get_rate(priv, sta, &msp->legacy, txrc); info->flags |= mi->tx_flags; + minstrel_ht_check_cck_shortpreamble(mp, mi, txrc->short_preamble); /* Don't use EAPOL frames for sampling on non-mrr hw */ if (mp->hw->max_rates == 1 && @@ -683,6 +772,30 @@ minstrel_ht_get_rate(void *priv, struct ieee80211_sta *sta, void *priv_sta, } static void +minstrel_ht_update_cck(struct minstrel_priv *mp, struct minstrel_ht_sta *mi, + struct ieee80211_supported_band *sband, + struct ieee80211_sta *sta) +{ + int i; + + if (sband->band != IEEE80211_BAND_2GHZ) + return; + + mi->cck_supported = 0; + mi->cck_supported_short = 0; + for (i = 0; i < 4; i++) { + if (!rate_supported(sta, sband->band, mp->cck_rates[i])) + continue; + + mi->cck_supported |= BIT(i); + if (sband->bitrates[i].flags & IEEE80211_RATE_SHORT_PREAMBLE) + mi->cck_supported_short |= BIT(i); + } + + mi->groups[MINSTREL_CCK_GROUP].supported = mi->cck_supported; +} + +static void minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, struct ieee80211_sta *sta, void *priv_sta) { @@ -702,7 +815,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, goto use_legacy; BUILD_BUG_ON(ARRAY_SIZE(minstrel_mcs_groups) != - MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS); + MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS + 1); msp->is_ht = true; memset(mi, 0, sizeof(*mi)); @@ -738,6 +851,11 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, u16 req = 0; mi->groups[i].supported = 0; + if (i == MINSTREL_CCK_GROUP) { + minstrel_ht_update_cck(mp, mi, sband, sta); + continue; + } + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) { if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) req |= IEEE80211_HT_CAP_SGI_40; diff --git a/net/mac80211/rc80211_minstrel_ht.h b/net/mac80211/rc80211_minstrel_ht.h index 462d2b2..302dbd5 100644 --- a/net/mac80211/rc80211_minstrel_ht.h +++ b/net/mac80211/rc80211_minstrel_ht.h @@ -107,8 +107,11 @@ struct minstrel_ht_sta { /* current MCS group to be sampled */ u8 sample_group; + u8 cck_supported; + u8 cck_supported_short; + /* MCS rate group info and statistics */ - struct minstrel_mcs_group_data groups[MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS]; + struct minstrel_mcs_group_data groups[MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS + 1]; }; struct minstrel_ht_sta_priv { diff --git a/net/mac80211/rc80211_minstrel_ht_debugfs.c b/net/mac80211/rc80211_minstrel_ht_debugfs.c index f2b7d26..df44a5a 100644 --- a/net/mac80211/rc80211_minstrel_ht_debugfs.c +++ b/net/mac80211/rc80211_minstrel_ht_debugfs.c @@ -15,13 +15,76 @@ #include "rc80211_minstrel.h" #include "rc80211_minstrel_ht.h" +static char * +minstrel_ht_stats_dump(struct minstrel_ht_sta *mi, int i, char *p) +{ + unsigned int max_mcs = MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; + const struct mcs_group *mg; + unsigned int j, tp, prob, eprob; + char htmode = '2'; + char gimode = 'L'; + + if (!mi->groups[i].supported) + return p; + + mg = &minstrel_mcs_groups[i]; + if (mg->flags & IEEE80211_TX_RC_40_MHZ_WIDTH) + htmode = '4'; + if (mg->flags & IEEE80211_TX_RC_SHORT_GI) + gimode = 'S'; + + for (j = 0; j < MCS_GROUP_RATES; j++) { + struct minstrel_rate_stats *mr = &mi->groups[i].rates[j]; + static const int bitrates[4] = { 10, 20, 55, 110 }; + int idx = i * MCS_GROUP_RATES + j; + + if (!(mi->groups[i].supported & BIT(j))) + continue; + + if (i == max_mcs) + p += sprintf(p, "CCK/%cP ", j < 4 ? 'L' : 'S'); + else + p += sprintf(p, "HT%c0/%cGI ", htmode, gimode); + + *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; + *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; + *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; + + if (i == max_mcs) { + int r = bitrates[j % 4]; + p += sprintf(p, " %2u.%1uM", r / 10, r % 10); + } else { + p += sprintf(p, " MCS%-2u", (mg->streams - 1) * + MCS_GROUP_RATES + j); + } + + tp = mr->cur_tp / 10; + prob = MINSTREL_TRUNC(mr->cur_prob * 1000); + eprob = MINSTREL_TRUNC(mr->probability * 1000); + + p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " + "%3u %3u(%3u) %8llu %8llu\n", + tp / 10, tp % 10, + eprob / 10, eprob % 10, + prob / 10, prob % 10, + mr->retry_count, + mr->last_success, + mr->last_attempts, + (unsigned long long)mr->succ_hist, + (unsigned long long)mr->att_hist); + } + + return p; +} + static int minstrel_ht_stats_open(struct inode *inode, struct file *file) { struct minstrel_ht_sta_priv *msp = inode->i_private; struct minstrel_ht_sta *mi = &msp->ht; struct minstrel_debugfs_info *ms; - unsigned int i, j, tp, prob, eprob; + unsigned int i; + unsigned int max_mcs = MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; char *p; int ret; @@ -40,49 +103,11 @@ minstrel_ht_stats_open(struct inode *inode, struct file *file) p = ms->buf; p += sprintf(p, "type rate throughput ewma prob this prob " "retry this succ/attempt success attempts\n"); - for (i = 0; i < MINSTREL_MAX_STREAMS * MINSTREL_STREAM_GROUPS; i++) { - char htmode = '2'; - char gimode = 'L'; - - if (!mi->groups[i].supported) - continue; - - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - htmode = '4'; - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) - gimode = 'S'; - for (j = 0; j < MCS_GROUP_RATES; j++) { - struct minstrel_rate_stats *mr = &mi->groups[i].rates[j]; - int idx = i * MCS_GROUP_RATES + j; + p = minstrel_ht_stats_dump(mi, max_mcs, p); + for (i = 0; i < max_mcs; i++) + p = minstrel_ht_stats_dump(mi, i, p); - if (!(mi->groups[i].supported & BIT(j))) - continue; - - p += sprintf(p, "HT%c0/%cGI ", htmode, gimode); - - *(p++) = (idx == mi->max_tp_rate) ? 'T' : ' '; - *(p++) = (idx == mi->max_tp_rate2) ? 't' : ' '; - *(p++) = (idx == mi->max_prob_rate) ? 'P' : ' '; - p += sprintf(p, " MCS%-2u", (minstrel_mcs_groups[i].streams - 1) * - MCS_GROUP_RATES + j); - - tp = mr->cur_tp / 10; - prob = MINSTREL_TRUNC(mr->cur_prob * 1000); - eprob = MINSTREL_TRUNC(mr->probability * 1000); - - p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u " - "%3u %3u(%3u) %8llu %8llu\n", - tp / 10, tp % 10, - eprob / 10, eprob % 10, - prob / 10, prob % 10, - mr->retry_count, - mr->last_success, - mr->last_attempts, - (unsigned long long)mr->succ_hist, - (unsigned long long)mr->att_hist); - } - } p += sprintf(p, "\nTotal packet count:: ideal %d " "lookaround %d\n", max(0, (int) mi->total_packets - (int) mi->sample_packets), -- cgit v0.10.2 From 2a0e047ed62f20664005881b8e7f9328f910316a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 23 Jan 2013 22:57:40 +0100 Subject: cfg80211: configuration for WoWLAN over TCP Intel Wireless devices are able to make a TCP connection after suspending, sending some data and waking up when the connection receives wakeup data (or breaks). Add the WoWLAN configuration and feature advertising API for it. Acked-by: David S. Miller Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index d3a7381..7e6569e 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -19,6 +19,7 @@ #include #include #include +#include #include /** @@ -1588,6 +1589,41 @@ struct cfg80211_wowlan_trig_pkt_pattern { }; /** + * struct cfg80211_wowlan_tcp - TCP connection parameters + * + * @sock: (internal) socket for source port allocation + * @src: source IP address + * @dst: destination IP address + * @dst_mac: destination MAC address + * @src_port: source port + * @dst_port: destination port + * @payload_len: data payload length + * @payload: data payload buffer + * @payload_seq: payload sequence stamping configuration + * @data_interval: interval at which to send data packets + * @wake_len: wakeup payload match length + * @wake_data: wakeup payload match data + * @wake_mask: wakeup payload match mask + * @tokens_size: length of the tokens buffer + * @payload_tok: payload token usage configuration + */ +struct cfg80211_wowlan_tcp { + struct socket *sock; + __be32 src, dst; + u16 src_port, dst_port; + u8 dst_mac[ETH_ALEN]; + int payload_len; + const u8 *payload; + struct nl80211_wowlan_tcp_data_seq payload_seq; + u32 data_interval; + u32 wake_len; + const u8 *wake_data, *wake_mask; + u32 tokens_size; + /* must be last, variable member */ + struct nl80211_wowlan_tcp_data_token payload_tok; +}; + +/** * struct cfg80211_wowlan - Wake on Wireless-LAN support info * * This structure defines the enabled WoWLAN triggers for the device. @@ -1601,12 +1637,15 @@ struct cfg80211_wowlan_trig_pkt_pattern { * @eap_identity_req: wake up on EAP identity request packet * @four_way_handshake: wake up on 4-way handshake * @rfkill_release: wake up when rfkill is released + * @tcp: TCP connection establishment/wakeup parameters, see nl80211.h. + * NULL if not configured. */ struct cfg80211_wowlan { bool any, disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, rfkill_release; struct cfg80211_wowlan_trig_pkt_pattern *patterns; + struct cfg80211_wowlan_tcp *tcp; int n_patterns; }; @@ -1626,11 +1665,15 @@ struct cfg80211_wowlan { * frame triggers an 802.3 frame should be reported, for * disconnect due to deauth 802.11 frame. This indicates which * it is. + * @tcp_match: TCP wakeup packet received + * @tcp_connlost: TCP connection lost or failed to establish + * @tcp_nomoretokens: TCP data ran out of tokens */ struct cfg80211_wowlan_wakeup { bool disconnect, magic_pkt, gtk_rekey_failure, eap_identity_req, four_way_handshake, - rfkill_release, packet_80211; + rfkill_release, packet_80211, + tcp_match, tcp_connlost, tcp_nomoretokens; s32 pattern_idx; u32 packet_present_len, packet_len; const void *packet; @@ -2285,6 +2328,14 @@ enum wiphy_wowlan_support_flags { WIPHY_WOWLAN_RFKILL_RELEASE = BIT(7), }; +struct wiphy_wowlan_tcp_support { + const struct nl80211_wowlan_tcp_data_token_feature *tok; + u32 data_payload_max; + u32 data_interval_max; + u32 wake_payload_max; + bool seq; +}; + /** * struct wiphy_wowlan_support - WoWLAN support data * @flags: see &enum wiphy_wowlan_support_flags @@ -2293,6 +2344,7 @@ enum wiphy_wowlan_support_flags { * @pattern_max_len: maximum length of each pattern * @pattern_min_len: minimum length of each pattern * @max_pkt_offset: maximum Rx packet offset + * @tcp: TCP wakeup support information */ struct wiphy_wowlan_support { u32 flags; @@ -2300,6 +2352,7 @@ struct wiphy_wowlan_support { int pattern_max_len; int pattern_min_len; int max_pkt_offset; + const struct wiphy_wowlan_tcp_support *tcp; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index eb7b322..5309b34 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2991,6 +2991,17 @@ struct nl80211_wowlan_pattern_support { * @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN: Original length of the 802.3 * packet, may be bigger than the @NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023 * attribute if the packet was truncated somewhere. + * @NL80211_WOWLAN_TRIG_TCP_CONNECTION: TCP connection wake, see DOC section + * "TCP connection wakeup" for more details. This is a nested attribute + * containing the exact information for establishing and keeping alive + * the TCP connection. + * @NL80211_WOWLAN_TRIG_TCP_WAKEUP_MATCH: For wakeup reporting only, the + * wakeup packet was received on the TCP connection + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST: For wakeup reporting only, the + * TCP connection was lost or failed to be established + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * @@ -3012,6 +3023,10 @@ enum nl80211_wowlan_triggers { NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023, NL80211_WOWLAN_TRIG_WAKEUP_PKT_8023_LEN, + NL80211_WOWLAN_TRIG_TCP_CONNECTION, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, /* keep last */ NUM_NL80211_WOWLAN_TRIG, @@ -3019,6 +3034,116 @@ enum nl80211_wowlan_triggers { }; /** + * DOC: TCP connection wakeup + * + * Some devices can establish a TCP connection in order to be woken up by a + * packet coming in from outside their network segment, or behind NAT. If + * configured, the device will establish a TCP connection to the given + * service, and periodically send data to that service. The first data + * packet is usually transmitted after SYN/ACK, also ACKing the SYN/ACK. + * The data packets can optionally include a (little endian) sequence + * number (in the TCP payload!) that is generated by the device, and, also + * optionally, a token from a list of tokens. This serves as a keep-alive + * with the service, and for NATed connections, etc. + * + * During this keep-alive period, the server doesn't send any data to the + * client. When receiving data, it is compared against the wakeup pattern + * (and mask) and if it matches, the host is woken up. Similarly, if the + * connection breaks or cannot be established to start with, the host is + * also woken up. + * + * Developer's note: ARP offload is required for this, otherwise TCP + * response packets might not go through correctly. + */ + +/** + * struct nl80211_wowlan_tcp_data_seq - WoWLAN TCP data sequence + * @start: starting value + * @offset: offset of sequence number in packet + * @len: length of the sequence value to write, 1 through 4 + * + * Note: don't confuse with the TCP sequence number(s), this is for the + * keepalive packet payload. The actual value is written into the packet + * in little endian. + */ +struct nl80211_wowlan_tcp_data_seq { + __u32 start, offset, len; +}; + +/** + * struct nl80211_wowlan_tcp_data_token - WoWLAN TCP data token config + * @offset: offset of token in packet + * @len: length of each token + * @token_stream: stream of data to be used for the tokens, the length must + * be a multiple of @len for this to make sense + */ +struct nl80211_wowlan_tcp_data_token { + __u32 offset, len; + __u8 token_stream[]; +}; + +/** + * struct nl80211_wowlan_tcp_data_token_feature - data token features + * @min_len: minimum token length + * @max_len: maximum token length + * @bufsize: total available token buffer size (max size of @token_stream) + */ +struct nl80211_wowlan_tcp_data_token_feature { + __u32 min_len, max_len, bufsize; +}; + +/** + * enum nl80211_wowlan_tcp_attrs - WoWLAN TCP connection parameters + * @__NL80211_WOWLAN_TCP_INVALID: invalid number for nested attributes + * @NL80211_WOWLAN_TCP_SRC_IPV4: source IPv4 address (in network byte order) + * @NL80211_WOWLAN_TCP_DST_IPV4: destination IPv4 address + * (in network byte order) + * @NL80211_WOWLAN_TCP_DST_MAC: destination MAC address, this is given because + * route lookup when configured might be invalid by the time we suspend, + * and doing a route lookup when suspending is no longer possible as it + * might require ARP querying. + * @NL80211_WOWLAN_TCP_SRC_PORT: source port (u16); optional, if not given a + * socket and port will be allocated + * @NL80211_WOWLAN_TCP_DST_PORT: destination port (u16) + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD: data packet payload, at least one byte. + * For feature advertising, a u32 attribute holding the maximum length + * of the data payload. + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ: data packet sequence configuration + * (if desired), a &struct nl80211_wowlan_tcp_data_seq. For feature + * advertising it is just a flag + * @NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN: data packet token configuration, + * see &struct nl80211_wowlan_tcp_data_token and for advertising see + * &struct nl80211_wowlan_tcp_data_token_feature. + * @NL80211_WOWLAN_TCP_DATA_INTERVAL: data interval in seconds, maximum + * interval in feature advertising (u32) + * @NL80211_WOWLAN_TCP_WAKE_PAYLOAD: wake packet payload, for advertising a + * u32 attribute holding the maximum length + * @NL80211_WOWLAN_TCP_WAKE_MASK: Wake packet payload mask, not used for + * feature advertising. The mask works like @NL80211_WOWLAN_PKTPAT_MASK + * but on the TCP payload only. + * @NUM_NL80211_WOWLAN_TCP: number of TCP attributes + * @MAX_NL80211_WOWLAN_TCP: highest attribute number + */ +enum nl80211_wowlan_tcp_attrs { + __NL80211_WOWLAN_TCP_INVALID, + NL80211_WOWLAN_TCP_SRC_IPV4, + NL80211_WOWLAN_TCP_DST_IPV4, + NL80211_WOWLAN_TCP_DST_MAC, + NL80211_WOWLAN_TCP_SRC_PORT, + NL80211_WOWLAN_TCP_DST_PORT, + NL80211_WOWLAN_TCP_DATA_PAYLOAD, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + NL80211_WOWLAN_TCP_DATA_INTERVAL, + NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + NL80211_WOWLAN_TCP_WAKE_MASK, + + /* keep last */ + NUM_NL80211_WOWLAN_TCP, + MAX_NL80211_WOWLAN_TCP = NUM_NL80211_WOWLAN_TCP - 1 +}; + +/** * enum nl80211_iface_limit_attrs - limit attributes * @NL80211_IFACE_LIMIT_UNSPEC: (reserved) * @NL80211_IFACE_LIMIT_MAX: maximum number of interfaces that diff --git a/net/wireless/core.h b/net/wireless/core.h index 37d70dc..949c957 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -108,6 +108,9 @@ cfg80211_rdev_free_wowlan(struct cfg80211_registered_device *rdev) for (i = 0; i < rdev->wowlan->n_patterns; i++) kfree(rdev->wowlan->patterns[i].mask); kfree(rdev->wowlan->patterns); + if (rdev->wowlan->tcp && rdev->wowlan->tcp->sock) + sock_release(rdev->wowlan->tcp->sock); + kfree(rdev->wowlan->tcp); kfree(rdev->wowlan); } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index cc0fad3..d29a461 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -19,6 +19,7 @@ #include #include #include +#include #include "core.h" #include "nl80211.h" #include "reg.h" @@ -399,6 +400,26 @@ nl80211_wowlan_policy[NUM_NL80211_WOWLAN_TRIG] = { [NL80211_WOWLAN_TRIG_EAP_IDENT_REQUEST] = { .type = NLA_FLAG }, [NL80211_WOWLAN_TRIG_4WAY_HANDSHAKE] = { .type = NLA_FLAG }, [NL80211_WOWLAN_TRIG_RFKILL_RELEASE] = { .type = NLA_FLAG }, + [NL80211_WOWLAN_TRIG_TCP_CONNECTION] = { .type = NLA_NESTED }, +}; + +static const struct nla_policy +nl80211_wowlan_tcp_policy[NUM_NL80211_WOWLAN_TCP] = { + [NL80211_WOWLAN_TCP_SRC_IPV4] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_DST_IPV4] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_DST_MAC] = { .len = ETH_ALEN }, + [NL80211_WOWLAN_TCP_SRC_PORT] = { .type = NLA_U16 }, + [NL80211_WOWLAN_TCP_DST_PORT] = { .type = NLA_U16 }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD] = { .len = 1 }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ] = { + .len = sizeof(struct nl80211_wowlan_tcp_data_seq) + }, + [NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN] = { + .len = sizeof(struct nl80211_wowlan_tcp_data_token) + }, + [NL80211_WOWLAN_TCP_DATA_INTERVAL] = { .type = NLA_U32 }, + [NL80211_WOWLAN_TCP_WAKE_PAYLOAD] = { .len = 1 }, + [NL80211_WOWLAN_TCP_WAKE_MASK] = { .len = 1 }, }; /* policy for GTK rekey offload attributes */ @@ -872,6 +893,48 @@ nla_put_failure: return -ENOBUFS; } +#ifdef CONFIG_PM +static int nl80211_send_wowlan_tcp_caps(struct cfg80211_registered_device *rdev, + struct sk_buff *msg) +{ + const struct wiphy_wowlan_tcp_support *tcp = rdev->wiphy.wowlan.tcp; + struct nlattr *nl_tcp; + + if (!tcp) + return 0; + + nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION); + if (!nl_tcp) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->data_payload_max)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->data_payload_max)) + return -ENOBUFS; + + if (tcp->seq && nla_put_flag(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ)) + return -ENOBUFS; + + if (tcp->tok && nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + sizeof(*tcp->tok), tcp->tok)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL, + tcp->data_interval_max)) + return -ENOBUFS; + + if (nla_put_u32(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + tcp->wake_payload_max)) + return -ENOBUFS; + + nla_nest_end(msg, nl_tcp); + return 0; +} +#endif + static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flags, struct cfg80211_registered_device *dev) { @@ -1246,6 +1309,9 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag goto nla_put_failure; } + if (nl80211_send_wowlan_tcp_caps(dev, msg)) + goto nla_put_failure; + nla_nest_end(msg, nl_wowlan); } #endif @@ -6930,16 +6996,67 @@ static int nl80211_send_wowlan_patterns(struct sk_buff *msg, return 0; } +static int nl80211_send_wowlan_tcp(struct sk_buff *msg, + struct cfg80211_wowlan_tcp *tcp) +{ + struct nlattr *nl_tcp; + + if (!tcp) + return 0; + + nl_tcp = nla_nest_start(msg, NL80211_WOWLAN_TRIG_TCP_CONNECTION); + if (!nl_tcp) + return -ENOBUFS; + + if (nla_put_be32(msg, NL80211_WOWLAN_TCP_SRC_IPV4, tcp->src) || + nla_put_be32(msg, NL80211_WOWLAN_TCP_DST_IPV4, tcp->dst) || + nla_put(msg, NL80211_WOWLAN_TCP_DST_MAC, ETH_ALEN, tcp->dst_mac) || + nla_put_u16(msg, NL80211_WOWLAN_TCP_SRC_PORT, tcp->src_port) || + nla_put_u16(msg, NL80211_WOWLAN_TCP_DST_PORT, tcp->dst_port) || + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD, + tcp->payload_len, tcp->payload) || + nla_put_u32(msg, NL80211_WOWLAN_TCP_DATA_INTERVAL, + tcp->data_interval) || + nla_put(msg, NL80211_WOWLAN_TCP_WAKE_PAYLOAD, + tcp->wake_len, tcp->wake_data) || + nla_put(msg, NL80211_WOWLAN_TCP_WAKE_MASK, + DIV_ROUND_UP(tcp->wake_len, 8), tcp->wake_mask)) + return -ENOBUFS; + + if (tcp->payload_seq.len && + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ, + sizeof(tcp->payload_seq), &tcp->payload_seq)) + return -ENOBUFS; + + if (tcp->payload_tok.len && + nla_put(msg, NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN, + sizeof(tcp->payload_tok) + tcp->tokens_size, + &tcp->payload_tok)) + return -ENOBUFS; + + return 0; +} + static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; struct sk_buff *msg; void *hdr; + u32 size = NLMSG_DEFAULT_SIZE; - if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns) + if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns && + !rdev->wiphy.wowlan.tcp) return -EOPNOTSUPP; - msg = nlmsg_new(NLMSG_DEFAULT_SIZE, GFP_KERNEL); + if (rdev->wowlan && rdev->wowlan->tcp) { + /* adjust size to have room for all the data */ + size += rdev->wowlan->tcp->tokens_size + + rdev->wowlan->tcp->payload_len + + rdev->wowlan->tcp->wake_len + + rdev->wowlan->tcp->wake_len / 8; + } + + msg = nlmsg_new(size, GFP_KERNEL); if (!msg) return -ENOMEM; @@ -6970,8 +7087,13 @@ static int nl80211_get_wowlan(struct sk_buff *skb, struct genl_info *info) (rdev->wowlan->rfkill_release && nla_put_flag(msg, NL80211_WOWLAN_TRIG_RFKILL_RELEASE))) goto nla_put_failure; + if (nl80211_send_wowlan_patterns(msg, rdev)) goto nla_put_failure; + + if (nl80211_send_wowlan_tcp(msg, rdev->wowlan->tcp)) + goto nla_put_failure; + nla_nest_end(msg, nl_wowlan); } @@ -6983,6 +7105,150 @@ nla_put_failure: return -ENOBUFS; } +static int nl80211_parse_wowlan_tcp(struct cfg80211_registered_device *rdev, + struct nlattr *attr, + struct cfg80211_wowlan *trig) +{ + struct nlattr *tb[NUM_NL80211_WOWLAN_TCP]; + struct cfg80211_wowlan_tcp *cfg; + struct nl80211_wowlan_tcp_data_token *tok = NULL; + struct nl80211_wowlan_tcp_data_seq *seq = NULL; + u32 size; + u32 data_size, wake_size, tokens_size = 0, wake_mask_size; + int err, port; + + if (!rdev->wiphy.wowlan.tcp) + return -EINVAL; + + err = nla_parse(tb, MAX_NL80211_WOWLAN_TCP, + nla_data(attr), nla_len(attr), + nl80211_wowlan_tcp_policy); + if (err) + return err; + + if (!tb[NL80211_WOWLAN_TCP_SRC_IPV4] || + !tb[NL80211_WOWLAN_TCP_DST_IPV4] || + !tb[NL80211_WOWLAN_TCP_DST_MAC] || + !tb[NL80211_WOWLAN_TCP_DST_PORT] || + !tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD] || + !tb[NL80211_WOWLAN_TCP_DATA_INTERVAL] || + !tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD] || + !tb[NL80211_WOWLAN_TCP_WAKE_MASK]) + return -EINVAL; + + data_size = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]); + if (data_size > rdev->wiphy.wowlan.tcp->data_payload_max) + return -EINVAL; + + if (nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]) > + rdev->wiphy.wowlan.tcp->data_interval_max) + return -EINVAL; + + wake_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]); + if (wake_size > rdev->wiphy.wowlan.tcp->wake_payload_max) + return -EINVAL; + + wake_mask_size = nla_len(tb[NL80211_WOWLAN_TCP_WAKE_MASK]); + if (wake_mask_size != DIV_ROUND_UP(wake_size, 8)) + return -EINVAL; + + if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]) { + u32 tokln = nla_len(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]); + + tok = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_TOKEN]); + tokens_size = tokln - sizeof(*tok); + + if (!tok->len || tokens_size % tok->len) + return -EINVAL; + if (!rdev->wiphy.wowlan.tcp->tok) + return -EINVAL; + if (tok->len > rdev->wiphy.wowlan.tcp->tok->max_len) + return -EINVAL; + if (tok->len < rdev->wiphy.wowlan.tcp->tok->min_len) + return -EINVAL; + if (tokens_size > rdev->wiphy.wowlan.tcp->tok->bufsize) + return -EINVAL; + if (tok->offset + tok->len > data_size) + return -EINVAL; + } + + if (tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]) { + seq = nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD_SEQ]); + if (!rdev->wiphy.wowlan.tcp->seq) + return -EINVAL; + if (seq->len == 0 || seq->len > 4) + return -EINVAL; + if (seq->len + seq->offset > data_size) + return -EINVAL; + } + + size = sizeof(*cfg); + size += data_size; + size += wake_size + wake_mask_size; + size += tokens_size; + + cfg = kzalloc(size, GFP_KERNEL); + if (!cfg) + return -ENOMEM; + cfg->src = nla_get_be32(tb[NL80211_WOWLAN_TCP_SRC_IPV4]); + cfg->dst = nla_get_be32(tb[NL80211_WOWLAN_TCP_DST_IPV4]); + memcpy(cfg->dst_mac, nla_data(tb[NL80211_WOWLAN_TCP_DST_MAC]), + ETH_ALEN); + if (tb[NL80211_WOWLAN_TCP_SRC_PORT]) + port = nla_get_u16(tb[NL80211_WOWLAN_TCP_SRC_PORT]); + else + port = 0; +#ifdef CONFIG_INET + /* allocate a socket and port for it and use it */ + err = __sock_create(wiphy_net(&rdev->wiphy), PF_INET, SOCK_STREAM, + IPPROTO_TCP, &cfg->sock, 1); + if (err) { + kfree(cfg); + return err; + } + if (inet_csk_get_port(cfg->sock->sk, port)) { + sock_release(cfg->sock); + kfree(cfg); + return -EADDRINUSE; + } + cfg->src_port = inet_sk(cfg->sock->sk)->inet_num; +#else + if (!port) { + kfree(cfg); + return -EINVAL; + } + cfg->src_port = port; +#endif + + cfg->dst_port = nla_get_u16(tb[NL80211_WOWLAN_TCP_DST_PORT]); + cfg->payload_len = data_size; + cfg->payload = (u8 *)cfg + sizeof(*cfg) + tokens_size; + memcpy((void *)cfg->payload, + nla_data(tb[NL80211_WOWLAN_TCP_DATA_PAYLOAD]), + data_size); + if (seq) + cfg->payload_seq = *seq; + cfg->data_interval = nla_get_u32(tb[NL80211_WOWLAN_TCP_DATA_INTERVAL]); + cfg->wake_len = wake_size; + cfg->wake_data = (u8 *)cfg + sizeof(*cfg) + tokens_size + data_size; + memcpy((void *)cfg->wake_data, + nla_data(tb[NL80211_WOWLAN_TCP_WAKE_PAYLOAD]), + wake_size); + cfg->wake_mask = (u8 *)cfg + sizeof(*cfg) + tokens_size + + data_size + wake_size; + memcpy((void *)cfg->wake_mask, + nla_data(tb[NL80211_WOWLAN_TCP_WAKE_MASK]), + wake_mask_size); + if (tok) { + cfg->tokens_size = tokens_size; + memcpy(&cfg->payload_tok, tok, sizeof(*tok) + tokens_size); + } + + trig->tcp = cfg; + + return 0; +} + static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -6993,7 +7259,8 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) int err, i; bool prev_enabled = rdev->wowlan; - if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns) + if (!rdev->wiphy.wowlan.flags && !rdev->wiphy.wowlan.n_patterns && + !rdev->wiphy.wowlan.tcp) return -EOPNOTSUPP; if (!info->attrs[NL80211_ATTR_WOWLAN_TRIGGERS]) { @@ -7120,6 +7387,14 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) } } + if (tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION]) { + err = nl80211_parse_wowlan_tcp( + rdev, tb[NL80211_WOWLAN_TRIG_TCP_CONNECTION], + &new_triggers); + if (err) + goto error; + } + ntrig = kmemdup(&new_triggers, sizeof(new_triggers), GFP_KERNEL); if (!ntrig) { err = -ENOMEM; @@ -7137,6 +7412,9 @@ static int nl80211_set_wowlan(struct sk_buff *skb, struct genl_info *info) for (i = 0; i < new_triggers.n_patterns; i++) kfree(new_triggers.patterns[i].mask); kfree(new_triggers.patterns); + if (new_triggers.tcp && new_triggers.tcp->sock) + sock_release(new_triggers.tcp->sock); + kfree(new_triggers.tcp); return err; } #endif @@ -9418,6 +9696,17 @@ void cfg80211_report_wowlan_wakeup(struct wireless_dev *wdev, wakeup->pattern_idx)) goto free_msg; + if (wakeup->tcp_match) + nla_put_flag(msg, NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH); + + if (wakeup->tcp_connlost) + nla_put_flag(msg, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST); + + if (wakeup->tcp_nomoretokens) + nla_put_flag(msg, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS); + if (wakeup->packet) { u32 pkt_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211; u32 len_attr = NL80211_WOWLAN_TRIG_WAKEUP_PKT_80211_LEN; -- cgit v0.10.2 From 68eed6ee4c70fdf71cbacf9af43a861cd7a237fb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 12 Feb 2013 15:23:14 +0300 Subject: brcmsmac: fix brcms_c_country_valid() ccode is not NUL terminated. Presumably insisting on a terminator makes brcms_c_country_valid() return false when it's not intended. ccode[2] is sprom->leddc_on_time. Signed-off-by: Dan Carpenter Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/channel.c b/drivers/net/wireless/brcm80211/brcmsmac/channel.c index cdb62b8..10ee314 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/channel.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/channel.c @@ -183,8 +183,7 @@ static bool brcms_c_country_valid(const char *ccode) * chars. */ if (!((0x80 & ccode[0]) == 0 && ccode[0] >= 0x41 && ccode[0] <= 0x5A && - (0x80 & ccode[1]) == 0 && ccode[1] >= 0x41 && ccode[1] <= 0x5A && - ccode[2] == '\0')) + (0x80 & ccode[1]) == 0 && ccode[1] >= 0x41 && ccode[1] <= 0x5A)) return false; /* -- cgit v0.10.2 From 06e7cda3ce30dadc3454539127b4cfc3888c349e Mon Sep 17 00:00:00 2001 From: Larry Finger Date: Tue, 12 Feb 2013 16:09:02 -0600 Subject: rtlwifi: Rework Kconfig As the number of drivers in the rtlwifi family has grown, the Kconfig section for them has grown unwieldy. This change has two effects: (1) Variable RTLWIFI_DEBUG is documented, and (2) the entries for the drivers that depend on RTLWIFI are indented. Signed-off-by: Larry Finger Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rtlwifi/Kconfig b/drivers/net/wireless/rtlwifi/Kconfig index b80bc46..b6aa0c4 100644 --- a/drivers/net/wireless/rtlwifi/Kconfig +++ b/drivers/net/wireless/rtlwifi/Kconfig @@ -1,8 +1,26 @@ +config RTLWIFI + tristate "Realtek wireless card support" + depends on MAC80211 + select FW_LOADER + ---help--- + This is common code for RTL8192CE/RTL8192CU/RTL8192SE/RTL8723AE + drivers. This module does nothing by itself - the various front-end + drivers need to be enabled to support any desired devices. + + If you choose to build as a module, it'll be called rtlwifi. + +config RTLWIFI_DEBUG + bool "Debugging output for rtlwifi driver family" + depends on RTLWIFI + default y + ---help--- + To use the module option that sets the dynamic-debugging level for, + the front-end driver, this parameter must be "Y". For memory-limited + systems, choose "N". If in doubt, choose "Y". + config RTL8192CE tristate "Realtek RTL8192CE/RTL8188CE Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI select RTL8192C_COMMON ---help--- This is the driver for Realtek RTL8192CE/RTL8188CE 802.11n PCIe @@ -12,9 +30,7 @@ config RTL8192CE config RTL8192SE tristate "Realtek RTL8192SE/RTL8191SE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8192SE/RTL8191SE 802.11n PCIe wireless network adapters. @@ -23,9 +39,7 @@ config RTL8192SE config RTL8192DE tristate "Realtek RTL8192DE/RTL8188DE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8192DE/RTL8188DE 802.11n PCIe wireless network adapters. @@ -34,9 +48,7 @@ config RTL8192DE config RTL8723AE tristate "Realtek RTL8723AE PCIe Wireless Network Adapter" - depends on MAC80211 && PCI && EXPERIMENTAL - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && PCI ---help--- This is the driver for Realtek RTL8723AE 802.11n PCIe wireless network adapters. @@ -45,9 +57,7 @@ config RTL8723AE config RTL8192CU tristate "Realtek RTL8192CU/RTL8188CU USB Wireless Network Adapter" - depends on MAC80211 && USB - select FW_LOADER - select RTLWIFI + depends on RTLWIFI && USB select RTL8192C_COMMON ---help--- This is the driver for Realtek RTL8192CU/RTL8188CU 802.11n USB @@ -55,16 +65,6 @@ config RTL8192CU If you choose to build it as a module, it will be called rtl8192cu -config RTLWIFI - tristate - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE - default m - -config RTLWIFI_DEBUG - bool "Additional debugging output" - depends on RTL8192CE || RTL8192CU || RTL8192SE || RTL8192DE || RTL8723AE - default y - config RTL8192C_COMMON tristate depends on RTL8192CE || RTL8192CU -- cgit v0.10.2 From 52301a815e81cdcbcf971ba28df0376dc7f3961c Mon Sep 17 00:00:00 2001 From: Avinash Patil Date: Tue, 12 Feb 2013 14:38:32 -0800 Subject: mwifiex: device specific sleep cookie handling for PCIe This patch adds support for handling of PCIe sleep cookie depending upon device properties. Some PCIe devices need sleep cookie probing before accessing HW while some others don't. A new sleep_cookie variable is defined as part of mwifiex_pcie_card_reg strcture and set/reset as per device capability. Sleep cookie is allocated/accessed/freed only when flag sleep_cookie for this particular device is enabled. Signed-off-by: Avinash Patil Signed-off-by: Bing Zhao Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/mwifiex/pcie.c b/drivers/net/wireless/mwifiex/pcie.c index 3b9be7c..492655c0 100644 --- a/drivers/net/wireless/mwifiex/pcie.c +++ b/drivers/net/wireless/mwifiex/pcie.c @@ -62,6 +62,10 @@ static bool mwifiex_pcie_ok_to_access_hw(struct mwifiex_adapter *adapter) { u32 *cookie_addr; struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; + + if (!reg->sleep_cookie) + return true; if (card->sleep_cookie_vbase) { cookie_addr = (u32 *)card->sleep_cookie_vbase; @@ -299,8 +303,10 @@ static int mwifiex_read_reg(struct mwifiex_adapter *adapter, int reg, u32 *data) static int mwifiex_pm_wakeup_card(struct mwifiex_adapter *adapter) { int i = 0; + struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; - while (mwifiex_pcie_ok_to_access_hw(adapter)) { + while (reg->sleep_cookie && mwifiex_pcie_ok_to_access_hw(adapter)) { i++; usleep_range(10, 20); /* 50ms max wait */ @@ -1513,8 +1519,8 @@ static int mwifiex_pcie_process_cmd_complete(struct mwifiex_adapter *adapter) if (adapter->ps_state == PS_STATE_SLEEP_CFM) { mwifiex_process_sleep_confirm_resp(adapter, skb->data, skb->len); - while (mwifiex_pcie_ok_to_access_hw(adapter) && - (count++ < 10)) + while (reg->sleep_cookie && (count++ < 10) && + mwifiex_pcie_ok_to_access_hw(adapter)) usleep_range(50, 60); } else { dev_err(adapter->dev, @@ -2172,6 +2178,7 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) struct pcie_service_card *card = adapter->card; int ret; struct pci_dev *pdev = card->dev; + const struct mwifiex_pcie_card_reg *reg = card->pcie.reg; pci_set_drvdata(pdev, card); @@ -2234,10 +2241,13 @@ static int mwifiex_pcie_init(struct mwifiex_adapter *adapter) ret = mwifiex_pcie_alloc_cmdrsp_buf(adapter); if (ret) goto err_alloc_cmdbuf; - ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter); - if (ret) - goto err_alloc_cookie; - + if (reg->sleep_cookie) { + ret = mwifiex_pcie_alloc_sleep_cookie_buf(adapter); + if (ret) + goto err_alloc_cookie; + } else { + card->sleep_cookie_vbase = NULL; + } return ret; err_alloc_cookie: @@ -2334,12 +2344,16 @@ static int mwifiex_register_dev(struct mwifiex_adapter *adapter) static void mwifiex_unregister_dev(struct mwifiex_adapter *adapter) { struct pcie_service_card *card = adapter->card; + const struct mwifiex_pcie_card_reg *reg; if (card) { dev_dbg(adapter->dev, "%s(): calling free_irq()\n", __func__); free_irq(card->dev->irq, card->dev); - mwifiex_pcie_delete_sleep_cookie_buf(adapter); + reg = card->pcie.reg; + if (reg->sleep_cookie) + mwifiex_pcie_delete_sleep_cookie_buf(adapter); + mwifiex_pcie_delete_cmdrsp_buf(adapter); mwifiex_pcie_delete_evtbd_ring(adapter); mwifiex_pcie_delete_rxbd_ring(adapter); diff --git a/drivers/net/wireless/mwifiex/pcie.h b/drivers/net/wireless/mwifiex/pcie.h index 6080615..d322ab8 100644 --- a/drivers/net/wireless/mwifiex/pcie.h +++ b/drivers/net/wireless/mwifiex/pcie.h @@ -126,6 +126,7 @@ struct mwifiex_pcie_card_reg { u8 ring_flag_xs_eop; u32 ring_tx_start_ptr; u8 pfu_enabled; + u8 sleep_cookie; }; static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { @@ -156,6 +157,7 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8766 = { .ring_flag_xs_eop = 0, .ring_tx_start_ptr = 0, .pfu_enabled = 0, + .sleep_cookie = 1, }; static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { @@ -186,6 +188,7 @@ static const struct mwifiex_pcie_card_reg mwifiex_reg_8897 = { .ring_flag_xs_eop = MWIFIEX_BD_FLAG_XS_EOP, .ring_tx_start_ptr = MWIFIEX_BD_FLAG_TX_START_PTR, .pfu_enabled = 1, + .sleep_cookie = 0, }; struct mwifiex_pcie_device { -- cgit v0.10.2 From 4ea545d476d3182056aeb042c439237ed61d261e Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 13 Feb 2013 14:27:05 +0100 Subject: rt2x00: check for dma mappings errors Check output of dma_map_single functions which nowadays can fail (when IOMMU is used). On write_beacon callbacks just print error, similar like padding error is handled by rt2800_write_beacon. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/rt2x00/rt2400pci.c b/drivers/net/wireless/rt2x00/rt2400pci.c index a2d2bc2..221beaa 100644 --- a/drivers/net/wireless/rt2x00/rt2400pci.c +++ b/drivers/net/wireless/rt2x00/rt2400pci.c @@ -1185,8 +1185,14 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(entry); - + if (rt2x00queue_map_txskb(entry)) { + ERROR(rt2x00dev, "Fail to map beacon, aborting\n"); + goto out; + } + /* + * Enable beaconing again. + */ + rt2x00_set_field32(®, CSR14_BEACON_GEN, 1); /* * Write the TX descriptor for the beacon. */ @@ -1196,7 +1202,7 @@ static void rt2400pci_write_beacon(struct queue_entry *entry, * Dump beacon to userspace through debugfs. */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - +out: /* * Enable beaconing again. */ diff --git a/drivers/net/wireless/rt2x00/rt2500pci.c b/drivers/net/wireless/rt2x00/rt2500pci.c index 9bea10f..39edc59 100644 --- a/drivers/net/wireless/rt2x00/rt2500pci.c +++ b/drivers/net/wireless/rt2x00/rt2500pci.c @@ -1338,7 +1338,10 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, rt2x00_set_field32(®, CSR14_BEACON_GEN, 0); rt2x00pci_register_write(rt2x00dev, CSR14, reg); - rt2x00queue_map_txskb(entry); + if (rt2x00queue_map_txskb(entry)) { + ERROR(rt2x00dev, "Fail to map beacon, aborting\n"); + goto out; + } /* * Write the TX descriptor for the beacon. @@ -1349,7 +1352,7 @@ static void rt2500pci_write_beacon(struct queue_entry *entry, * Dump beacon to userspace through debugfs. */ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); - +out: /* * Enable beaconing again. */ diff --git a/drivers/net/wireless/rt2x00/rt2x00.h b/drivers/net/wireless/rt2x00/rt2x00.h index 9a3f31a..086abb4 100644 --- a/drivers/net/wireless/rt2x00/rt2x00.h +++ b/drivers/net/wireless/rt2x00/rt2x00.h @@ -1169,8 +1169,10 @@ static inline bool rt2x00_is_soc(struct rt2x00_dev *rt2x00dev) /** * rt2x00queue_map_txskb - Map a skb into DMA for TX purposes. * @entry: Pointer to &struct queue_entry + * + * Returns -ENOMEM if mapping fail, 0 otherwise. */ -void rt2x00queue_map_txskb(struct queue_entry *entry); +int rt2x00queue_map_txskb(struct queue_entry *entry); /** * rt2x00queue_unmap_skb - Unmap a skb from DMA. diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index f35d85a..e26ec9d 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -87,24 +87,35 @@ struct sk_buff *rt2x00queue_alloc_rxskb(struct queue_entry *entry, gfp_t gfp) skbdesc->entry = entry; if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) { - skbdesc->skb_dma = dma_map_single(rt2x00dev->dev, - skb->data, - skb->len, - DMA_FROM_DEVICE); + dma_addr_t skb_dma; + + skb_dma = dma_map_single(rt2x00dev->dev, skb->data, skb->len, + DMA_FROM_DEVICE); + if (unlikely(dma_mapping_error(rt2x00dev->dev, skb_dma))) { + dev_kfree_skb_any(skb); + return NULL; + } + + skbdesc->skb_dma = skb_dma; skbdesc->flags |= SKBDESC_DMA_MAPPED_RX; } return skb; } -void rt2x00queue_map_txskb(struct queue_entry *entry) +int rt2x00queue_map_txskb(struct queue_entry *entry) { struct device *dev = entry->queue->rt2x00dev->dev; struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); skbdesc->skb_dma = dma_map_single(dev, entry->skb->data, entry->skb->len, DMA_TO_DEVICE); + + if (unlikely(dma_mapping_error(dev, skbdesc->skb_dma))) + return -ENOMEM; + skbdesc->flags |= SKBDESC_DMA_MAPPED_TX; + return 0; } EXPORT_SYMBOL_GPL(rt2x00queue_map_txskb); @@ -545,8 +556,9 @@ static int rt2x00queue_write_tx_data(struct queue_entry *entry, /* * Map the skb to DMA. */ - if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags)) - rt2x00queue_map_txskb(entry); + if (test_bit(REQUIRE_DMA, &rt2x00dev->cap_flags) && + rt2x00queue_map_txskb(entry)) + return -ENOMEM; return 0; } -- cgit v0.10.2 From bdb084b22d8aee66c87af5e9c36bd6cf7f3bccfd Mon Sep 17 00:00:00 2001 From: Stanislaw Gruszka Date: Wed, 13 Feb 2013 15:49:08 +0100 Subject: iwlegacy: more checks for dma mapping errors This patch check output of pci_map_single() calls. I missed them on my previous patch "iwlegacy: check for dma mapping errors", which fixed only pci_map_page() calls. To handle remaining possible dma mappings errors, we need to rearrange ilXXXX_tx_skb() and il_enqueue_hcmd() functions. Signed-off-by: Stanislaw Gruszka Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/iwlegacy/3945-mac.c b/drivers/net/wireless/iwlegacy/3945-mac.c index 83856d1..3630a41 100644 --- a/drivers/net/wireless/iwlegacy/3945-mac.c +++ b/drivers/net/wireless/iwlegacy/3945-mac.c @@ -572,26 +572,11 @@ il3945_tx_skb(struct il_priv *il, il3945_hw_build_tx_cmd_rate(il, out_cmd, info, hdr, sta_id); /* Total # bytes to be transmitted */ - len = (u16) skb->len; - tx_cmd->len = cpu_to_le16(len); + tx_cmd->len = cpu_to_le16((u16) skb->len); - il_update_stats(il, true, fc, len); tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_A_MSK; tx_cmd->tx_flags &= ~TX_CMD_FLG_ANT_B_MSK; - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } - - D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); - D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); - il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); - il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, - ieee80211_hdrlen(fc)); - /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -610,14 +595,8 @@ il3945_tx_skb(struct il_priv *il, * within command buffer array. */ txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr, len, PCI_DMA_TODEVICE); - /* we do not map meta data ... so we can safely access address to - * provide to unmap command*/ - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, len); - - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0); + if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) + goto drop_unlock; /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -626,10 +605,34 @@ il3945_tx_skb(struct il_priv *il, phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len, len, PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) + goto drop_unlock; + } + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, len, 1, 0); + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, len); + if (len) il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, len, 0, U32_PAD(len)); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; } + il_update_stats(il, true, fc, skb->len); + + D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); + D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); + il_print_hex_dump(il, IL_DL_TX, tx_cmd, sizeof(*tx_cmd)); + il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, + ieee80211_hdrlen(fc)); + /* Tell device the write idx *just past* this latest filled TFD */ q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); il_txq_update_write_ptr(il, txq); diff --git a/drivers/net/wireless/iwlegacy/4965-mac.c b/drivers/net/wireless/iwlegacy/4965-mac.c index 835662a..7941eb3 100644 --- a/drivers/net/wireless/iwlegacy/4965-mac.c +++ b/drivers/net/wireless/iwlegacy/4965-mac.c @@ -1793,8 +1793,7 @@ il4965_tx_skb(struct il_priv *il, memcpy(tx_cmd->hdr, hdr, hdr_len); /* Total # bytes to be transmitted */ - len = (u16) skb->len; - tx_cmd->len = cpu_to_le16(len); + tx_cmd->len = cpu_to_le16((u16) skb->len); if (info->control.hw_key) il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id); @@ -1804,7 +1803,6 @@ il4965_tx_skb(struct il_priv *il, il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc); - il_update_stats(il, true, fc, len); /* * Use the first empty entry in this queue's command buffer array * to contain the Tx command and MAC header concatenated together @@ -1826,18 +1824,8 @@ il4965_tx_skb(struct il_priv *il, txcmd_phys = pci_map_single(il->pci_dev, &out_cmd->hdr, firstlen, PCI_DMA_BIDIRECTIONAL); - dma_unmap_addr_set(out_meta, mapping, txcmd_phys); - dma_unmap_len_set(out_meta, len, firstlen); - /* Add buffer containing Tx command and MAC(!) header to TFD's - * first entry */ - il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); - - if (!ieee80211_has_morefrags(hdr->frame_control)) { - txq->need_update = 1; - } else { - wait_write_ptr = 1; - txq->need_update = 0; - } + if (unlikely(pci_dma_mapping_error(il->pci_dev, txcmd_phys))) + goto drop_unlock; /* Set up TFD's 2nd entry to point directly to remainder of skb, * if any (802.11 null frames have no payload). */ @@ -1846,8 +1834,24 @@ il4965_tx_skb(struct il_priv *il, phys_addr = pci_map_single(il->pci_dev, skb->data + hdr_len, secondlen, PCI_DMA_TODEVICE); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) + goto drop_unlock; + } + + /* Add buffer containing Tx command and MAC(!) header to TFD's + * first entry */ + il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0); + dma_unmap_addr_set(out_meta, mapping, txcmd_phys); + dma_unmap_len_set(out_meta, len, firstlen); + if (secondlen) il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen, 0, 0); + + if (!ieee80211_has_morefrags(hdr->frame_control)) { + txq->need_update = 1; + } else { + wait_write_ptr = 1; + txq->need_update = 0; } scratch_phys = @@ -1860,6 +1864,8 @@ il4965_tx_skb(struct il_priv *il, tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys); tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys); + il_update_stats(il, true, fc, skb->len); + D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence)); D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags)); il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd)); diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 1f59860..4ed2949 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -3162,18 +3162,23 @@ il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd) idx, il->cmd_queue); } #endif - txq->need_update = 1; - - if (il->ops->txq_update_byte_cnt_tbl) - /* Set up entry in queue's byte count circular buffer */ - il->ops->txq_update_byte_cnt_tbl(il, txq, 0); phys_addr = pci_map_single(il->pci_dev, &out_cmd->hdr, fix_size, PCI_DMA_BIDIRECTIONAL); + if (unlikely(pci_dma_mapping_error(il->pci_dev, phys_addr))) { + idx = -ENOMEM; + goto out; + } dma_unmap_addr_set(out_meta, mapping, phys_addr); dma_unmap_len_set(out_meta, len, fix_size); + txq->need_update = 1; + + if (il->ops->txq_update_byte_cnt_tbl) + /* Set up entry in queue's byte count circular buffer */ + il->ops->txq_update_byte_cnt_tbl(il, txq, 0); + il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, fix_size, 1, U32_PAD(cmd->len)); @@ -3181,6 +3186,7 @@ il_enqueue_hcmd(struct il_priv *il, struct il_host_cmd *cmd) q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd); il_txq_update_write_ptr(il, txq); +out: spin_unlock_irqrestore(&il->hcmd_lock, flags); return idx; } -- cgit v0.10.2 From e81c7e93b8f047bd0fe2cd150b0866c9da4c201d Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 13 Feb 2013 17:33:20 -0800 Subject: brcmsmac: Downgrade d11hdrs_mac80211 error messages to warnings. These messages don't seem to be errors but notifications that some attribute isn't quite right. Don't mark them as errors. Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index e80825e..b3ea15e 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -6443,10 +6443,9 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, if ((txrate[k]->flags & IEEE80211_TX_RC_MCS) && (!is_mcs_rate(rspec[k]))) { - brcms_err(wlc->hw->d11core, - "wl%d: %s: IEEE80211_TX_" - "RC_MCS != is_mcs_rate(rspec)\n", - wlc->pub->unit, __func__); + brcms_warn(wlc->hw->d11core, + "wl%d: %s: IEEE80211_TX_RC_MCS != is_mcs_rate(rspec)\n", + wlc->pub->unit, __func__); } if (is_mcs_rate(rspec[k])) { @@ -6838,21 +6837,19 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, wlc->fragthresh[queue] = (u16) newfragthresh; } else { - brcms_err(wlc->hw->d11core, - "wl%d: %s txop invalid " - "for rate %d\n", - wlc->pub->unit, fifo_names[queue], - rspec2rate(rspec[0])); + brcms_warn(wlc->hw->d11core, + "wl%d: %s txop invalid for rate %d\n", + wlc->pub->unit, fifo_names[queue], + rspec2rate(rspec[0])); } if (dur > wlc->edcf_txop[ac]) - brcms_err(wlc->hw->d11core, - "wl%d: %s: %s txop " - "exceeded phylen %d/%d dur %d/%d\n", - wlc->pub->unit, __func__, - fifo_names[queue], - phylen, wlc->fragthresh[queue], - dur, wlc->edcf_txop[ac]); + brcms_warn(wlc->hw->d11core, + "wl%d: %s: %s txop exceeded phylen %d/%d dur %d/%d\n", + wlc->pub->unit, __func__, + fifo_names[queue], + phylen, wlc->fragthresh[queue], + dur, wlc->edcf_txop[ac]); } } -- cgit v0.10.2 From b56e681b6210a635af4e4eb93ce81b4654851033 Mon Sep 17 00:00:00 2001 From: Joe Perches Date: Wed, 13 Feb 2013 17:33:21 -0800 Subject: brcmsmac: Remove unnecessary memset casts Remove the casts of the first argument of memset. Neaten the style by using the sizeof the actual variable being memset not the sizeof the type of variable. Signed-off-by: Joe Perches Signed-off-by: John W. Linville diff --git a/drivers/net/wireless/brcm80211/brcmsmac/main.c b/drivers/net/wireless/brcm80211/brcmsmac/main.c index b3ea15e..8ef02dc 100644 --- a/drivers/net/wireless/brcm80211/brcmsmac/main.c +++ b/drivers/net/wireless/brcm80211/brcmsmac/main.c @@ -3138,8 +3138,7 @@ void brcms_c_reset(struct brcms_c_info *wlc) brcms_c_statsupd(wlc); /* reset our snapshot of macstat counters */ - memset((char *)wlc->core->macstat_snapshot, 0, - sizeof(struct macstat)); + memset(wlc->core->macstat_snapshot, 0, sizeof(struct macstat)); brcms_b_reset(wlc->hw); } @@ -4052,7 +4051,7 @@ void brcms_c_wme_setparams(struct brcms_c_info *wlc, u16 aci, return; } - memset((char *)&acp_shm, 0, sizeof(struct shm_acparams)); + memset(&acp_shm, 0, sizeof(struct shm_acparams)); /* fill in shm ac params struct */ acp_shm.txop = params->txop; /* convert from units of 32us to us for ucode */ @@ -4768,7 +4767,7 @@ static void brcms_c_bss_default_init(struct brcms_c_info *wlc) struct brcms_bss_info *bi = wlc->default_bss; /* init default and target BSS with some sane initial values */ - memset((char *)(bi), 0, sizeof(struct brcms_bss_info)); + memset(bi, 0, sizeof(*bi)); bi->beacon_period = BEACON_INTERVAL_DEFAULT; /* fill the default channel as the first valid channel @@ -5297,7 +5296,7 @@ int brcms_c_set_gmode(struct brcms_c_info *wlc, u8 gmode, bool config) brcms_c_protection_upd(wlc, BRCMS_PROT_G_USER, gmode); /* Clear rateset override */ - memset(&rs, 0, sizeof(struct brcms_c_rateset)); + memset(&rs, 0, sizeof(rs)); switch (gmode) { case GMODE_LEGACY_B: @@ -5520,7 +5519,7 @@ int brcms_c_set_rateset(struct brcms_c_info *wlc, struct brcm_rateset *rs) if (rs->count > BRCMS_NUMRATES) return -ENOBUFS; - memset(&internal_rs, 0, sizeof(struct brcms_c_rateset)); + memset(&internal_rs, 0, sizeof(internal_rs)); /* Copy only legacy rateset section */ internal_rs.count = rs->count; @@ -5623,7 +5622,7 @@ int brcms_c_module_unregister(struct brcms_pub *pub, const char *name, for (i = 0; i < BRCMS_MAXMODULES; i++) { if (!strcmp(wlc->modulecb[i].name, name) && (wlc->modulecb[i].hdl == hdl)) { - memset(&wlc->modulecb[i], 0, sizeof(struct modulecb)); + memset(&wlc->modulecb[i], 0, sizeof(wlc->modulecb[i])); return 0; } } @@ -6678,11 +6677,9 @@ brcms_c_d11hdrs_mac80211(struct brcms_c_info *wlc, struct ieee80211_hw *hw, (struct ofdm_phy_hdr *) rts_plcp) : rts_plcp[0]) << 8; } else { - memset((char *)txh->RTSPhyHeader, 0, D11_PHY_HDR_LEN); - memset((char *)&txh->rts_frame, 0, - sizeof(struct ieee80211_rts)); - memset((char *)txh->RTSPLCPFallback, 0, - sizeof(txh->RTSPLCPFallback)); + memset(txh->RTSPhyHeader, 0, D11_PHY_HDR_LEN); + memset(&txh->rts_frame, 0, sizeof(struct ieee80211_rts)); + memset(txh->RTSPLCPFallback, 0, sizeof(txh->RTSPLCPFallback)); txh->RTSDurFallback = 0; } @@ -7324,7 +7321,7 @@ brcms_c_bcn_prb_template(struct brcms_c_info *wlc, u16 type, *len = hdr_len + body_len; /* format PHY and MAC headers */ - memset((char *)buf, 0, hdr_len); + memset(buf, 0, hdr_len); plcp = (struct cck_phy_hdr *) buf; -- cgit v0.10.2 From 04f39047af2a6df64b763ea5a271db24879d0391 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 8 Feb 2013 18:16:19 +0100 Subject: nl80211/cfg80211: add radar detection command/event Add new NL80211_CMD_RADAR_DETECT, which starts the Channel Availability Check (CAC). This command will also notify the usermode about events (CAC finished, CAC aborted, radar detected, NOP finished). Once radar detection has started it should continuously monitor for radars as long as the channel is active. This patch enables DFS for AP mode in nl80211/cfg80211. Based on original patch by Victor Goldenshtein Signed-off-by: Simon Wunderlich [remove WIPHY_FLAG_HAS_RADAR_DETECT again -- my mistake] Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 7e6569e..ee11a3d 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -114,6 +114,9 @@ enum ieee80211_channel_flags { #define IEEE80211_CHAN_NO_HT40 \ (IEEE80211_CHAN_NO_HT40PLUS | IEEE80211_CHAN_NO_HT40MINUS) +#define IEEE80211_DFS_MIN_CAC_TIME_MS 60000 +#define IEEE80211_DFS_MIN_NOP_TIME_MS (30 * 60 * 1000) + /** * struct ieee80211_channel - channel definition * @@ -134,6 +137,9 @@ enum ieee80211_channel_flags { * to enable this, this is useful only on 5 GHz band. * @orig_mag: internal use * @orig_mpwr: internal use + * @dfs_state: current state of this channel. Only relevant if radar is required + * on this channel. + * @dfs_state_entered: timestamp (jiffies) when the dfs state was entered. */ struct ieee80211_channel { enum ieee80211_band band; @@ -146,6 +152,8 @@ struct ieee80211_channel { bool beacon_found; u32 orig_flags; int orig_mag, orig_mpwr; + enum nl80211_dfs_state dfs_state; + unsigned long dfs_state_entered; }; /** @@ -569,6 +577,7 @@ struct cfg80211_acl_data { * @p2p_opp_ps: P2P opportunistic PS * @acl: ACL configuration used by the drivers which has support for * MAC address based access control + * @radar_required: set if radar detection is required */ struct cfg80211_ap_settings { struct cfg80211_chan_def chandef; @@ -586,6 +595,7 @@ struct cfg80211_ap_settings { u8 p2p_ctwindow; bool p2p_opp_ps; const struct cfg80211_acl_data *acl; + bool radar_required; }; /** @@ -1909,6 +1919,8 @@ struct cfg80211_gtk_rekey_data { * this new list replaces the existing one. Driver has to clear its ACL * when number of MAC addresses entries is passed as 0. Drivers which * advertise the support for MAC based ACL have to implement this callback. + * + * @start_radar_detection: Start radar detection in the driver. */ struct cfg80211_ops { int (*suspend)(struct wiphy *wiphy, struct cfg80211_wowlan *wow); @@ -2132,6 +2144,10 @@ struct cfg80211_ops { int (*set_mac_acl)(struct wiphy *wiphy, struct net_device *dev, const struct cfg80211_acl_data *params); + + int (*start_radar_detection)(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef); }; /* @@ -2715,6 +2731,8 @@ struct cfg80211_cached_keys; * beacons, 0 when not valid * @address: The address for this device, valid only if @netdev is %NULL * @p2p_started: true if this is a P2P Device that has been started + * @cac_started: true if DFS channel availability check has been started + * @cac_start_time: timestamp (jiffies) when the dfs state was entered. */ struct wireless_dev { struct wiphy *wiphy; @@ -2766,6 +2784,9 @@ struct wireless_dev { u32 ap_unexpected_nlportid; + bool cac_started; + unsigned long cac_start_time; + #ifdef CONFIG_CFG80211_WEXT /* wext data */ struct { @@ -3755,6 +3776,31 @@ void cfg80211_cqm_rssi_notify(struct net_device *dev, gfp_t gfp); /** + * cfg80211_radar_event - radar detection event + * @wiphy: the wiphy + * @chandef: chandef for the current channel + * @gfp: context flags + * + * This function is called when a radar is detected on the current chanenl. + */ +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, gfp_t gfp); + +/** + * cfg80211_cac_event - Channel availability check (CAC) event + * @netdev: network device + * @event: type of event + * @gfp: context flags + * + * This function is called when a Channel availability check (CAC) is finished + * or aborted. This must be called to notify the completion of a CAC process, + * also by full-MAC drivers. + */ +void cfg80211_cac_event(struct net_device *netdev, + enum nl80211_radar_event event, gfp_t gfp); + + +/** * cfg80211_cqm_pktloss_notify - notify userspace about packetloss to peer * @dev: network device * @peer: peer's MAC address diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 5309b34..90b7af8 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -603,6 +603,14 @@ * command is used in AP/P2P GO mode. Driver has to make sure to clear its * ACL list during %NL80211_CMD_STOP_AP. * + * @NL80211_CMD_RADAR_DETECT: Start a Channel availability check (CAC). Once + * a radar is detected or the channel availability scan (CAC) has finished + * or was aborted, or a radar was detected, usermode will be notified with + * this event. This command is also used to notify userspace about radars + * while operating on this channel. + * %NL80211_ATTR_RADAR_EVENT is used to inform about the type of the + * event. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -755,6 +763,8 @@ enum nl80211_commands { NL80211_CMD_SET_MAC_ACL, + NL80211_CMD_RADAR_DETECT, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1342,6 +1352,9 @@ enum nl80211_commands { * number of MAC addresses that a device can support for MAC * ACL. * + * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, + * contains a value of enum nl80211_radar_event (u32). + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1620,6 +1633,8 @@ enum nl80211_attrs { NL80211_ATTR_MAC_ACL_MAX, + NL80211_ATTR_RADAR_EVENT, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, @@ -2022,6 +2037,10 @@ enum nl80211_band_attr { * on this channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX_TX_POWER: Maximum transmission power in mBm * (100 * dBm). + * @NL80211_FREQUENCY_ATTR_DFS_STATE: current state for DFS + * (enum nl80211_dfs_state) + * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long + * this channel is in this DFS state. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2034,6 +2053,8 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_NO_IBSS, NL80211_FREQUENCY_ATTR_RADAR, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, + NL80211_FREQUENCY_ATTR_DFS_STATE, + NL80211_FREQUENCY_ATTR_DFS_TIME, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3489,4 +3510,44 @@ enum nl80211_acl_policy { NL80211_ACL_POLICY_DENY_UNLESS_LISTED, }; +/** + * enum nl80211_radar_event - type of radar event for DFS operation + * + * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace + * about detected radars or success of the channel available check (CAC) + * + * @NL80211_RADAR_DETECTED: A radar pattern has been detected. The channel is + * now unusable. + * @NL80211_RADAR_CAC_FINISHED: Channel Availability Check has been finished, + * the channel is now available. + * @NL80211_RADAR_CAC_ABORTED: Channel Availability Check has been aborted, no + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. + */ +enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, +}; + +/** + * enum nl80211_dfs_state - DFS states for channels + * + * Channel states used by the DFS code. + * + * @IEEE80211_DFS_USABLE: The channel can be used, but channel availability + * check (CAC) must be performed before using it for AP or IBSS. + * @IEEE80211_DFS_UNAVAILABLE: A radar has been detected on this channel, it + * is therefore marked as not available. + * @IEEE80211_DFS_AVAILABLE: The channel has been CAC checked and is available. + */ + +enum nl80211_dfs_state { + NL80211_DFS_USABLE, + NL80211_DFS_UNAVAILABLE, + NL80211_DFS_AVAILABLE, +}; + #endif /* __LINUX_NL80211_H */ diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 396373f..810c23c 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -147,6 +147,32 @@ static void chandef_primary_freqs(const struct cfg80211_chan_def *c, } } +static int cfg80211_chandef_get_width(const struct cfg80211_chan_def *c) +{ + int width; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_20_NOHT: + width = 20; + break; + case NL80211_CHAN_WIDTH_40: + width = 40; + break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_80: + width = 80; + break; + case NL80211_CHAN_WIDTH_160: + width = 160; + break; + default: + WARN_ON_ONCE(1); + return -1; + } + return width; +} + const struct cfg80211_chan_def * cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1, const struct cfg80211_chan_def *c2) @@ -192,6 +218,93 @@ cfg80211_chandef_compatible(const struct cfg80211_chan_def *c1, } EXPORT_SYMBOL(cfg80211_chandef_compatible); +static void cfg80211_set_chans_dfs_state(struct wiphy *wiphy, u32 center_freq, + u32 bandwidth, + enum nl80211_dfs_state dfs_state) +{ + struct ieee80211_channel *c; + u32 freq; + + for (freq = center_freq - bandwidth/2 + 10; + freq <= center_freq + bandwidth/2 - 10; + freq += 20) { + c = ieee80211_get_channel(wiphy, freq); + if (!c || !(c->flags & IEEE80211_CHAN_RADAR)) + continue; + + c->dfs_state = dfs_state; + c->dfs_state_entered = jiffies; + } +} + +void cfg80211_set_dfs_state(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef, + enum nl80211_dfs_state dfs_state) +{ + int width; + + if (WARN_ON(!cfg80211_chandef_valid(chandef))) + return; + + width = cfg80211_chandef_get_width(chandef); + if (width < 0) + return; + + cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq1, + width, dfs_state); + + if (!chandef->center_freq2) + return; + cfg80211_set_chans_dfs_state(wiphy, chandef->center_freq2, + width, dfs_state); +} + +static int cfg80211_get_chans_dfs_required(struct wiphy *wiphy, + u32 center_freq, + u32 bandwidth) +{ + struct ieee80211_channel *c; + u32 freq; + + for (freq = center_freq - bandwidth/2 + 10; + freq <= center_freq + bandwidth/2 - 10; + freq += 20) { + c = ieee80211_get_channel(wiphy, freq); + if (!c) + return -EINVAL; + + if (c->flags & IEEE80211_CHAN_RADAR) + return 1; + } + return 0; +} + + +int cfg80211_chandef_dfs_required(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef) +{ + int width; + int r; + + if (WARN_ON(!cfg80211_chandef_valid(chandef))) + return -EINVAL; + + width = cfg80211_chandef_get_width(chandef); + if (width < 0) + return -EINVAL; + + r = cfg80211_get_chans_dfs_required(wiphy, chandef->center_freq1, + width); + if (r) + return r; + + if (!chandef->center_freq2) + return 0; + + return cfg80211_get_chans_dfs_required(wiphy, chandef->center_freq2, + width); +} + static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, u32 center_freq, u32 bandwidth, u32 prohibited_flags) @@ -203,7 +316,16 @@ static bool cfg80211_secondary_chans_ok(struct wiphy *wiphy, freq <= center_freq + bandwidth/2 - 10; freq += 20) { c = ieee80211_get_channel(wiphy, freq); - if (!c || c->flags & prohibited_flags) + if (!c) + return false; + + /* check for radar flags */ + if ((prohibited_flags & c->flags & IEEE80211_CHAN_RADAR) && + (c->dfs_state != NL80211_DFS_AVAILABLE)) + return false; + + /* check for the other flags */ + if (c->flags & prohibited_flags & ~IEEE80211_CHAN_RADAR) return false; } @@ -344,7 +466,10 @@ cfg80211_get_chan_state(struct wireless_dev *wdev, break; case NL80211_IFTYPE_AP: case NL80211_IFTYPE_P2P_GO: - if (wdev->beacon_interval) { + if (wdev->cac_started) { + *chan = wdev->channel; + *chanmode = CHAN_MODE_SHARED; + } else if (wdev->beacon_interval) { *chan = wdev->channel; *chanmode = CHAN_MODE_SHARED; } diff --git a/net/wireless/core.c b/net/wireless/core.c index f0a1bbe..9220021 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -324,6 +324,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) INIT_LIST_HEAD(&rdev->bss_list); INIT_WORK(&rdev->scan_done_wk, __cfg80211_scan_done); INIT_WORK(&rdev->sched_scan_results_wk, __cfg80211_sched_scan_results); + INIT_DELAYED_WORK(&rdev->dfs_update_channels_wk, + cfg80211_dfs_channels_update_work); #ifdef CONFIG_CFG80211_WEXT rdev->wiphy.wext = &cfg80211_wext_handler; #endif @@ -695,6 +697,7 @@ void wiphy_unregister(struct wiphy *wiphy) flush_work(&rdev->scan_done_wk); cancel_work_sync(&rdev->conn_work); flush_work(&rdev->event_work); + cancel_delayed_work_sync(&rdev->dfs_update_channels_wk); if (rdev->wowlan && rdev->ops->set_wakeup) rdev_set_wakeup(rdev, false); diff --git a/net/wireless/core.h b/net/wireless/core.h index 949c957..3aec0e4 100644 --- a/net/wireless/core.h +++ b/net/wireless/core.h @@ -86,6 +86,8 @@ struct cfg80211_registered_device { struct cfg80211_wowlan *wowlan; + struct delayed_work dfs_update_channels_wk; + /* must be last because of the way we do wiphy_priv(), * and it should at least be aligned to NETDEV_ALIGN */ struct wiphy wiphy __aligned(NETDEV_ALIGN); @@ -431,6 +433,22 @@ int cfg80211_can_use_iftype_chan(struct cfg80211_registered_device *rdev, enum cfg80211_chan_mode chanmode, u8 radar_detect); +/** + * cfg80211_chandef_dfs_required - checks if radar detection is required + * @wiphy: the wiphy to validate against + * @chandef: the channel definition to check + * Return: 1 if radar detection is required, 0 if it is not, < 0 on error + */ +int cfg80211_chandef_dfs_required(struct wiphy *wiphy, + const struct cfg80211_chan_def *c); + +void cfg80211_set_dfs_state(struct wiphy *wiphy, + const struct cfg80211_chan_def *chandef, + enum nl80211_dfs_state dfs_state); + +void cfg80211_dfs_channels_update_work(struct work_struct *work); + + static inline int cfg80211_can_change_interface(struct cfg80211_registered_device *rdev, struct wireless_dev *wdev, @@ -457,6 +475,16 @@ cfg80211_can_use_chan(struct cfg80211_registered_device *rdev, chan, chanmode, 0); } +static inline unsigned int elapsed_jiffies_msecs(unsigned long start) +{ + unsigned long end = jiffies; + + if (end >= start) + return jiffies_to_msecs(end - start); + + return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); +} + void cfg80211_get_chan_state(struct wireless_dev *wdev, struct ieee80211_channel **chan, diff --git a/net/wireless/mlme.c b/net/wireless/mlme.c index 8e69207..caddca3 100644 --- a/net/wireless/mlme.c +++ b/net/wireless/mlme.c @@ -987,3 +987,123 @@ void cfg80211_pmksa_candidate_notify(struct net_device *dev, int index, nl80211_pmksa_candidate_notify(rdev, dev, index, bssid, preauth, gfp); } EXPORT_SYMBOL(cfg80211_pmksa_candidate_notify); + +void cfg80211_dfs_channels_update_work(struct work_struct *work) +{ + struct delayed_work *delayed_work; + struct cfg80211_registered_device *rdev; + struct cfg80211_chan_def chandef; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *c; + struct wiphy *wiphy; + bool check_again = false; + unsigned long timeout, next_time = 0; + int bandid, i; + + delayed_work = container_of(work, struct delayed_work, work); + rdev = container_of(delayed_work, struct cfg80211_registered_device, + dfs_update_channels_wk); + wiphy = &rdev->wiphy; + + mutex_lock(&cfg80211_mutex); + for (bandid = 0; bandid < IEEE80211_NUM_BANDS; bandid++) { + sband = wiphy->bands[bandid]; + if (!sband) + continue; + + for (i = 0; i < sband->n_channels; i++) { + c = &sband->channels[i]; + + if (c->dfs_state != NL80211_DFS_UNAVAILABLE) + continue; + + timeout = c->dfs_state_entered + + IEEE80211_DFS_MIN_NOP_TIME_MS; + + if (time_after_eq(jiffies, timeout)) { + c->dfs_state = NL80211_DFS_USABLE; + cfg80211_chandef_create(&chandef, c, + NL80211_CHAN_NO_HT); + + nl80211_radar_notify(rdev, &chandef, + NL80211_RADAR_NOP_FINISHED, + NULL, GFP_ATOMIC); + continue; + } + + if (!check_again) + next_time = timeout - jiffies; + else + next_time = min(next_time, timeout - jiffies); + check_again = true; + } + } + mutex_unlock(&cfg80211_mutex); + + /* reschedule if there are other channels waiting to be cleared again */ + if (check_again) + queue_delayed_work(cfg80211_wq, &rdev->dfs_update_channels_wk, + next_time); +} + + +void cfg80211_radar_event(struct wiphy *wiphy, + struct cfg80211_chan_def *chandef, + gfp_t gfp) +{ + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + unsigned long timeout; + + trace_cfg80211_radar_event(wiphy, chandef); + + /* only set the chandef supplied channel to unavailable, in + * case the radar is detected on only one of multiple channels + * spanned by the chandef. + */ + cfg80211_set_dfs_state(wiphy, chandef, NL80211_DFS_UNAVAILABLE); + + timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_NOP_TIME_MS); + queue_delayed_work(cfg80211_wq, &rdev->dfs_update_channels_wk, + timeout); + + nl80211_radar_notify(rdev, chandef, NL80211_RADAR_DETECTED, NULL, gfp); +} +EXPORT_SYMBOL(cfg80211_radar_event); + +void cfg80211_cac_event(struct net_device *netdev, + enum nl80211_radar_event event, gfp_t gfp) +{ + struct wireless_dev *wdev = netdev->ieee80211_ptr; + struct wiphy *wiphy = wdev->wiphy; + struct cfg80211_registered_device *rdev = wiphy_to_dev(wiphy); + struct cfg80211_chan_def chandef; + unsigned long timeout; + + trace_cfg80211_cac_event(netdev, event); + + if (WARN_ON(!wdev->cac_started)) + return; + + if (WARN_ON(!wdev->channel)) + return; + + cfg80211_chandef_create(&chandef, wdev->channel, NL80211_CHAN_NO_HT); + + switch (event) { + case NL80211_RADAR_CAC_FINISHED: + timeout = wdev->cac_start_time + + msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); + WARN_ON(!time_after_eq(jiffies, timeout)); + cfg80211_set_dfs_state(wiphy, &chandef, NL80211_DFS_AVAILABLE); + break; + case NL80211_RADAR_CAC_ABORTED: + break; + default: + WARN_ON(1); + return; + } + wdev->cac_started = false; + + nl80211_radar_notify(rdev, &chandef, event, netdev, gfp); +} +EXPORT_SYMBOL(cfg80211_cac_event); diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index d29a461..c1e18cc 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -552,9 +552,16 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if ((chan->flags & IEEE80211_CHAN_NO_IBSS) && nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_IBSS)) goto nla_put_failure; - if ((chan->flags & IEEE80211_CHAN_RADAR) && - nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR)) - goto nla_put_failure; + if (chan->flags & IEEE80211_CHAN_RADAR) { + u32 time = elapsed_jiffies_msecs(chan->dfs_state_entered); + if (nla_put_flag(msg, NL80211_FREQUENCY_ATTR_RADAR)) + goto nla_put_failure; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_STATE, + chan->dfs_state)) + goto nla_put_failure; + if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time)) + goto nla_put_failure; + } if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, DBM_TO_MBM(chan->max_power))) @@ -2775,6 +2782,7 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) struct wireless_dev *wdev = dev->ieee80211_ptr; struct cfg80211_ap_settings params; int err; + u8 radar_detect_width = 0; if (dev->ieee80211_ptr->iftype != NL80211_IFTYPE_AP && dev->ieee80211_ptr->iftype != NL80211_IFTYPE_P2P_GO) @@ -2893,9 +2901,19 @@ static int nl80211_start_ap(struct sk_buff *skb, struct genl_info *info) if (!cfg80211_reg_can_beacon(&rdev->wiphy, ¶ms.chandef)) return -EINVAL; + err = cfg80211_chandef_dfs_required(wdev->wiphy, ¶ms.chandef); + if (err < 0) + return err; + if (err) { + radar_detect_width = BIT(params.chandef.width); + params.radar_required = true; + } + mutex_lock(&rdev->devlist_mtx); - err = cfg80211_can_use_chan(rdev, wdev, params.chandef.chan, - CHAN_MODE_SHARED); + err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, + params.chandef.chan, + CHAN_MODE_SHARED, + radar_detect_width); mutex_unlock(&rdev->devlist_mtx); if (err) @@ -5055,6 +5073,54 @@ static int nl80211_stop_sched_scan(struct sk_buff *skb, return err; } +static int nl80211_start_radar_detection(struct sk_buff *skb, + struct genl_info *info) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct net_device *dev = info->user_ptr[1]; + struct wireless_dev *wdev = dev->ieee80211_ptr; + struct cfg80211_chan_def chandef; + int err; + + err = nl80211_parse_chandef(rdev, info, &chandef); + if (err) + return err; + + if (wdev->cac_started) + return -EBUSY; + + err = cfg80211_chandef_dfs_required(wdev->wiphy, &chandef); + if (err < 0) + return err; + + if (err == 0) + return -EINVAL; + + if (chandef.chan->dfs_state != NL80211_DFS_USABLE) + return -EINVAL; + + if (!rdev->ops->start_radar_detection) + return -EOPNOTSUPP; + + mutex_lock(&rdev->devlist_mtx); + err = cfg80211_can_use_iftype_chan(rdev, wdev, wdev->iftype, + chandef.chan, CHAN_MODE_SHARED, + BIT(chandef.width)); + if (err) + goto err_locked; + + err = rdev->ops->start_radar_detection(&rdev->wiphy, dev, &chandef); + if (!err) { + wdev->channel = chandef.chan; + wdev->cac_started = true; + wdev->cac_start_time = jiffies; + } +err_locked: + mutex_unlock(&rdev->devlist_mtx); + + return err; +} + static int nl80211_send_bss(struct sk_buff *msg, struct netlink_callback *cb, u32 seq, int flags, struct cfg80211_registered_device *rdev, @@ -8305,6 +8371,14 @@ static struct genl_ops nl80211_ops[] = { .internal_flags = NL80211_FLAG_NEED_NETDEV | NL80211_FLAG_NEED_RTNL, }, + { + .cmd = NL80211_CMD_RADAR_DETECT, + .doit = nl80211_start_radar_detection, + .policy = nl80211_policy, + .flags = GENL_ADMIN_PERM, + .internal_flags = NL80211_FLAG_NEED_NETDEV_UP | + NL80211_FLAG_NEED_RTNL, + }, }; static struct genl_multicast_group nl80211_mlme_mcgrp = { @@ -9502,6 +9576,57 @@ nl80211_send_cqm_txe_notify(struct cfg80211_registered_device *rdev, } void +nl80211_radar_notify(struct cfg80211_registered_device *rdev, + struct cfg80211_chan_def *chandef, + enum nl80211_radar_event event, + struct net_device *netdev, gfp_t gfp) +{ + struct sk_buff *msg; + void *hdr; + + msg = nlmsg_new(NLMSG_DEFAULT_SIZE, gfp); + if (!msg) + return; + + hdr = nl80211hdr_put(msg, 0, 0, 0, NL80211_CMD_RADAR_DETECT); + if (!hdr) { + nlmsg_free(msg); + return; + } + + if (nla_put_u32(msg, NL80211_ATTR_WIPHY, rdev->wiphy_idx)) + goto nla_put_failure; + + /* NOP and radar events don't need a netdev parameter */ + if (netdev) { + struct wireless_dev *wdev = netdev->ieee80211_ptr; + + if (nla_put_u32(msg, NL80211_ATTR_IFINDEX, netdev->ifindex) || + nla_put_u64(msg, NL80211_ATTR_WDEV, wdev_id(wdev))) + goto nla_put_failure; + } + + if (nla_put_u32(msg, NL80211_ATTR_RADAR_EVENT, event)) + goto nla_put_failure; + + if (nl80211_send_chandef(msg, chandef)) + goto nla_put_failure; + + if (genlmsg_end(msg, hdr) < 0) { + nlmsg_free(msg); + return; + } + + genlmsg_multicast_netns(wiphy_net(&rdev->wiphy), msg, 0, + nl80211_mlme_mcgrp.id, gfp); + return; + + nla_put_failure: + genlmsg_cancel(msg, hdr); + nlmsg_free(msg); +} + +void nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *peer, u32 num_packets, gfp_t gfp) diff --git a/net/wireless/nl80211.h b/net/wireless/nl80211.h index 2acba84..b061da4 100644 --- a/net/wireless/nl80211.h +++ b/net/wireless/nl80211.h @@ -108,6 +108,13 @@ nl80211_send_cqm_rssi_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, enum nl80211_cqm_rssi_threshold_event rssi_event, gfp_t gfp); + +void +nl80211_radar_notify(struct cfg80211_registered_device *rdev, + struct cfg80211_chan_def *chandef, + enum nl80211_radar_event event, + struct net_device *netdev, gfp_t gfp); + void nl80211_send_cqm_pktloss_notify(struct cfg80211_registered_device *rdev, struct net_device *netdev, const u8 *peer, diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 08d3da2..e97d5b0 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -884,6 +884,9 @@ static void handle_channel(struct wiphy *wiphy, return; } + chan->dfs_state = NL80211_DFS_USABLE; + chan->dfs_state_entered = jiffies; + chan->beacon_found = false; chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = diff --git a/net/wireless/scan.c b/net/wireless/scan.c index d0fc6da..f0d9b51 100644 --- a/net/wireless/scan.c +++ b/net/wireless/scan.c @@ -1210,16 +1210,6 @@ static void ieee80211_scan_add_ies(struct iw_request_info *info, } } -static inline unsigned int elapsed_jiffies_msecs(unsigned long start) -{ - unsigned long end = jiffies; - - if (end >= start) - return jiffies_to_msecs(end - start); - - return jiffies_to_msecs(end + (MAX_JIFFY_OFFSET - start) + 1); -} - static char * ieee80211_bss(struct wiphy *wiphy, struct iw_request_info *info, struct cfg80211_internal_bss *bss, char *current_ev, diff --git a/net/wireless/trace.h b/net/wireless/trace.h index c9cafb0..b7a5313 100644 --- a/net/wireless/trace.h +++ b/net/wireless/trace.h @@ -2051,6 +2051,21 @@ TRACE_EVENT(cfg80211_reg_can_beacon, WIPHY_PR_ARG, CHAN_DEF_PR_ARG) ); +TRACE_EVENT(cfg80211_chandef_dfs_required, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef), + TP_ARGS(wiphy, chandef), + TP_STRUCT__entry( + WIPHY_ENTRY + CHAN_DEF_ENTRY + ), + TP_fast_assign( + WIPHY_ASSIGN; + CHAN_DEF_ASSIGN(chandef); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT, + WIPHY_PR_ARG, CHAN_DEF_PR_ARG) +); + TRACE_EVENT(cfg80211_ch_switch_notify, TP_PROTO(struct net_device *netdev, struct cfg80211_chan_def *chandef), @@ -2067,6 +2082,36 @@ TRACE_EVENT(cfg80211_ch_switch_notify, NETDEV_PR_ARG, CHAN_DEF_PR_ARG) ); +TRACE_EVENT(cfg80211_radar_event, + TP_PROTO(struct wiphy *wiphy, struct cfg80211_chan_def *chandef), + TP_ARGS(wiphy, chandef), + TP_STRUCT__entry( + WIPHY_ENTRY + CHAN_DEF_ENTRY + ), + TP_fast_assign( + WIPHY_ASSIGN; + CHAN_DEF_ASSIGN(chandef); + ), + TP_printk(WIPHY_PR_FMT ", " CHAN_DEF_PR_FMT, + WIPHY_PR_ARG, CHAN_DEF_PR_ARG) +); + +TRACE_EVENT(cfg80211_cac_event, + TP_PROTO(struct net_device *netdev, enum nl80211_radar_event evt), + TP_ARGS(netdev, evt), + TP_STRUCT__entry( + NETDEV_ENTRY + __field(enum nl80211_radar_event, evt) + ), + TP_fast_assign( + NETDEV_ASSIGN; + __entry->evt = evt; + ), + TP_printk(NETDEV_PR_FMT ", event: %d", + NETDEV_PR_ARG, __entry->evt) +); + DECLARE_EVENT_CLASS(cfg80211_rx_evt, TP_PROTO(struct net_device *netdev, const u8 *addr), TP_ARGS(netdev, addr), -- cgit v0.10.2 From 164eb02d070af987890e1db1c12b8ae0394b19f7 Mon Sep 17 00:00:00 2001 From: Simon Wunderlich Date: Fri, 8 Feb 2013 18:16:20 +0100 Subject: mac80211: add radar detection command/event Add command to trigger radar detection in the driver/FW. Once radar detection is started it should continuously monitor for radars as long as the channel active. If radar is detected usermode notified with 'radar detected' event. Scanning and remain on channel functionality must be disabled while doing radar detection/scanning, and vice versa. Based on original patch by Victor Goldenshtein Signed-off-by: Simon Wunderlich Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 0eaa909..7241962 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -147,10 +147,12 @@ struct ieee80211_low_level_stats { * enum ieee80211_chanctx_change - change flag for channel context * @IEEE80211_CHANCTX_CHANGE_WIDTH: The channel width changed * @IEEE80211_CHANCTX_CHANGE_RX_CHAINS: The number of RX chains changed + * @IEEE80211_CHANCTX_CHANGE_RADAR: radar detection flag changed */ enum ieee80211_chanctx_change { IEEE80211_CHANCTX_CHANGE_WIDTH = BIT(0), IEEE80211_CHANCTX_CHANGE_RX_CHAINS = BIT(1), + IEEE80211_CHANCTX_CHANGE_RADAR = BIT(2), }; /** @@ -165,6 +167,7 @@ enum ieee80211_chanctx_change { * @rx_chains_dynamic: The number of RX chains that must be enabled * after RTS/CTS handshake to receive SMPS MIMO transmissions; * this will always be >= @rx_chains_static. + * @radar_enabled: whether radar detection is enabled on this channel. * @drv_priv: data area for driver use, will always be aligned to * sizeof(void *), size is determined in hw information. */ @@ -173,6 +176,8 @@ struct ieee80211_chanctx_conf { u8 rx_chains_static, rx_chains_dynamic; + bool radar_enabled; + u8 drv_priv[0] __aligned(sizeof(void *)); }; @@ -967,6 +972,7 @@ enum ieee80211_smps_mode { * * @channel: the channel to tune to * @channel_type: the channel (HT) type + * @radar_enabled: whether radar detection is enabled * * @long_frame_max_tx_count: Maximum number of transmissions for a "long" frame * (a frame not RTS protected), called "dot11LongRetryLimit" in 802.11, @@ -993,6 +999,7 @@ struct ieee80211_conf { struct ieee80211_channel *channel; enum nl80211_channel_type channel_type; + bool radar_enabled; enum ieee80211_smps_mode smps_mode; }; @@ -3945,6 +3952,13 @@ void ieee80211_cqm_rssi_notify(struct ieee80211_vif *vif, gfp_t gfp); /** + * ieee80211_radar_detected - inform that a radar was detected + * + * @hw: pointer as obtained from ieee80211_alloc_hw() + */ +void ieee80211_radar_detected(struct ieee80211_hw *hw); + +/** * ieee80211_chswitch_done - Complete channel switch process * @vif: &struct ieee80211_vif pointer from the add_interface callback. * @success: make the channel switch successful or not diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index e3dec80..0969978 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -928,6 +928,7 @@ static int ieee80211_start_ap(struct wiphy *wiphy, struct net_device *dev, /* TODO: make hostapd tell us what it wants */ sdata->smps_mode = IEEE80211_SMPS_OFF; sdata->needed_rx_chains = sdata->local->rx_chains; + sdata->radar_required = params->radar_required; err = ieee80211_vif_use_channel(sdata, ¶ms->chandef, IEEE80211_CHANCTX_SHARED); @@ -2395,7 +2396,8 @@ static int ieee80211_start_roc_work(struct ieee80211_local *local, INIT_LIST_HEAD(&roc->dependents); /* if there's one pending or we're scanning, queue this one */ - if (!list_empty(&local->roc_list) || local->scanning) + if (!list_empty(&local->roc_list) || + local->scanning || local->radar_detect_enabled) goto out_check_combine; /* if not HW assist, just queue & schedule work */ @@ -2645,6 +2647,37 @@ static int ieee80211_cancel_remain_on_channel(struct wiphy *wiphy, return ieee80211_cancel_roc(local, cookie, false); } +static int ieee80211_start_radar_detection(struct wiphy *wiphy, + struct net_device *dev, + struct cfg80211_chan_def *chandef) +{ + struct ieee80211_sub_if_data *sdata = IEEE80211_DEV_TO_SUB_IF(dev); + struct ieee80211_local *local = sdata->local; + unsigned long timeout; + int err; + + if (!list_empty(&local->roc_list) || local->scanning) + return -EBUSY; + + /* whatever, but channel contexts should not complain about that one */ + sdata->smps_mode = IEEE80211_SMPS_OFF; + sdata->needed_rx_chains = local->rx_chains; + sdata->radar_required = true; + + mutex_lock(&local->iflist_mtx); + err = ieee80211_vif_use_channel(sdata, chandef, + IEEE80211_CHANCTX_SHARED); + mutex_unlock(&local->iflist_mtx); + if (err) + return err; + + timeout = msecs_to_jiffies(IEEE80211_DFS_MIN_CAC_TIME_MS); + ieee80211_queue_delayed_work(&sdata->local->hw, + &sdata->dfs_cac_timer_work, timeout); + + return 0; +} + static int ieee80211_mgmt_tx(struct wiphy *wiphy, struct wireless_dev *wdev, struct ieee80211_channel *chan, bool offchan, unsigned int wait, const u8 *buf, size_t len, @@ -3350,4 +3383,5 @@ struct cfg80211_ops mac80211_config_ops = { .get_et_stats = ieee80211_get_et_stats, .get_et_strings = ieee80211_get_et_strings, .get_channel = ieee80211_cfg_get_channel, + .start_radar_detection = ieee80211_start_radar_detection, }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 038f249..2e6faed 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -193,6 +193,7 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, if (ctx->refcount > 0) { ieee80211_recalc_chanctx_chantype(sdata->local, ctx); ieee80211_recalc_smps_chanctx(local, ctx); + ieee80211_recalc_radar_chanctx(local, ctx); } } @@ -216,6 +217,37 @@ static void __ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) ieee80211_free_chanctx(local, ctx); } +void ieee80211_recalc_radar_chanctx(struct ieee80211_local *local, + struct ieee80211_chanctx *chanctx) +{ + struct ieee80211_sub_if_data *sdata; + bool radar_enabled = false; + + lockdep_assert_held(&local->chanctx_mtx); + + rcu_read_lock(); + list_for_each_entry_rcu(sdata, &local->interfaces, list) { + if (sdata->radar_required) { + radar_enabled = true; + break; + } + } + rcu_read_unlock(); + + if (radar_enabled == chanctx->conf.radar_enabled) + return; + + chanctx->conf.radar_enabled = radar_enabled; + local->radar_detect_enabled = chanctx->conf.radar_enabled; + + if (!local->use_chanctx) { + local->hw.conf.radar_enabled = chanctx->conf.radar_enabled; + ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); + } + + drv_change_chanctx(local, chanctx, IEEE80211_CHANCTX_CHANGE_RADAR); +} + void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx) { @@ -331,6 +363,7 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, } ieee80211_recalc_smps_chanctx(local, ctx); + ieee80211_recalc_radar_chanctx(local, ctx); out: mutex_unlock(&local->chanctx_mtx); return ret; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 76cdcfc..0e0a977 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -722,6 +722,9 @@ struct ieee80211_sub_if_data { int user_power_level; /* in dBm */ int ap_power_level; /* in dBm */ + bool radar_required; + struct delayed_work dfs_cac_timer_work; + /* * AP this belongs to: self in AP mode and * corresponding AP in VLAN mode, NULL for @@ -942,6 +945,10 @@ struct ieee80211_local { /* wowlan is enabled -- don't reconfig on resume */ bool wowlan; + /* DFS/radar detection is enabled */ + bool radar_detect_enabled; + struct work_struct radar_detected_work; + /* number of RX chains the hardware has */ u8 rx_chains; @@ -1606,6 +1613,13 @@ void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, void ieee80211_recalc_smps_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *chanctx); +void ieee80211_recalc_radar_chanctx(struct ieee80211_local *local, + struct ieee80211_chanctx *chanctx); + +void ieee80211_dfs_cac_timer(unsigned long data); +void ieee80211_dfs_cac_timer_work(struct work_struct *work); +void ieee80211_dfs_cac_cancel(struct ieee80211_local *local); +void ieee80211_dfs_radar_detected_work(struct work_struct *work); #ifdef CONFIG_MAC80211_NOINLINE #define debug_noinline noinline diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index 40ff030..e9223ce 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -749,6 +749,16 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, cancel_work_sync(&sdata->recalc_smps); + cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); + + if (sdata->wdev.cac_started) { + mutex_lock(&local->iflist_mtx); + ieee80211_vif_release_channel(sdata); + mutex_unlock(&local->iflist_mtx); + cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_ABORTED, + GFP_KERNEL); + } + /* APs need special treatment */ if (sdata->vif.type == NL80211_IFTYPE_AP) { struct ieee80211_sub_if_data *vlan, *tmpsdata; @@ -1513,6 +1523,8 @@ int ieee80211_if_add(struct ieee80211_local *local, const char *name, spin_lock_init(&sdata->cleanup_stations_lock); INIT_LIST_HEAD(&sdata->cleanup_stations); INIT_WORK(&sdata->cleanup_stations_wk, ieee80211_cleanup_sdata_stas_wk); + INIT_DELAYED_WORK(&sdata->dfs_cac_timer_work, + ieee80211_dfs_cac_timer_work); for (i = 0; i < IEEE80211_NUM_BANDS; i++) { struct ieee80211_supported_band *sband; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 38b3468..9cdbc77 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -621,6 +621,9 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, INIT_WORK(&local->restart_work, ieee80211_restart_work); + INIT_WORK(&local->radar_detected_work, + ieee80211_dfs_radar_detected_work); + INIT_WORK(&local->reconfig_filter, ieee80211_reconfig_filter); local->smps_mode = IEEE80211_SMPS_OFF; @@ -713,6 +716,16 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_WDS)) return -EINVAL; + + /* DFS currently not supported with channel context drivers */ + for (i = 0; i < local->hw.wiphy->n_iface_combinations; i++) { + const struct ieee80211_iface_combination *comb; + + comb = &local->hw.wiphy->iface_combinations[i]; + + if (comb->radar_detect_widths) + return -EINVAL; + } } /* Only HW csum features are currently compatible with mac80211 */ diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index efb2276..7d4cde7 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1212,6 +1212,19 @@ void ieee80211_dynamic_ps_timer(unsigned long data) ieee80211_queue_work(&local->hw, &local->dynamic_ps_enable_work); } +void ieee80211_dfs_cac_timer_work(struct work_struct *work) +{ + struct delayed_work *delayed_work = + container_of(work, struct delayed_work, work); + struct ieee80211_sub_if_data *sdata = + container_of(delayed_work, struct ieee80211_sub_if_data, + dfs_cac_timer_work); + + ieee80211_vif_release_channel(sdata); + + cfg80211_cac_event(sdata->dev, NL80211_RADAR_CAC_FINISHED, GFP_KERNEL); +} + /* MLME */ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/pm.c b/net/mac80211/pm.c index 53801d2..d0275f3 100644 --- a/net/mac80211/pm.c +++ b/net/mac80211/pm.c @@ -38,6 +38,8 @@ int __ieee80211_suspend(struct ieee80211_hw *hw, struct cfg80211_wowlan *wowlan) ieee80211_scan_cancel(local); + ieee80211_dfs_cac_cancel(local); + if (hw->flags & IEEE80211_HW_AMPDU_AGGREGATION) { mutex_lock(&local->sta_mtx); list_for_each_entry(sta, &local->sta_list, list) { diff --git a/net/mac80211/scan.c b/net/mac80211/scan.c index 6d0b89e..43a45cf 100644 --- a/net/mac80211/scan.c +++ b/net/mac80211/scan.c @@ -351,6 +351,9 @@ static int ieee80211_start_sw_scan(struct ieee80211_local *local) static bool ieee80211_can_scan(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata) { + if (local->radar_detect_enabled) + return false; + if (!list_empty(&local->roc_list)) return false; diff --git a/net/mac80211/trace.h b/net/mac80211/trace.h index 0bdd7ae..1183c4a 100644 --- a/net/mac80211/trace.h +++ b/net/mac80211/trace.h @@ -1862,6 +1862,25 @@ TRACE_EVENT(drv_set_default_unicast_key, LOCAL_PR_ARG, VIF_PR_ARG, __entry->key_idx) ); +TRACE_EVENT(api_radar_detected, + TP_PROTO(struct ieee80211_local *local), + + TP_ARGS(local), + + TP_STRUCT__entry( + LOCAL_ENTRY + ), + + TP_fast_assign( + LOCAL_ASSIGN; + ), + + TP_printk( + LOCAL_PR_FMT " radar detected", + LOCAL_PR_ARG + ) +); + #ifdef CONFIG_MAC80211_MESSAGE_TRACING #undef TRACE_SYSTEM #define TRACE_SYSTEM mac80211_msg diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 6cb71a3..218cb52 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -2133,3 +2133,49 @@ u64 ieee80211_calculate_rx_timestamp(struct ieee80211_local *local, return ts; } + +void ieee80211_dfs_cac_cancel(struct ieee80211_local *local) +{ + struct ieee80211_sub_if_data *sdata; + + mutex_lock(&local->iflist_mtx); + list_for_each_entry(sdata, &local->interfaces, list) { + cancel_delayed_work_sync(&sdata->dfs_cac_timer_work); + + if (sdata->wdev.cac_started) { + ieee80211_vif_release_channel(sdata); + cfg80211_cac_event(sdata->dev, + NL80211_RADAR_CAC_ABORTED, + GFP_KERNEL); + } + } + mutex_unlock(&local->iflist_mtx); +} + +void ieee80211_dfs_radar_detected_work(struct work_struct *work) +{ + struct ieee80211_local *local = + container_of(work, struct ieee80211_local, radar_detected_work); + struct cfg80211_chan_def chandef; + + ieee80211_dfs_cac_cancel(local); + + if (local->use_chanctx) + /* currently not handled */ + WARN_ON(1); + else { + cfg80211_chandef_create(&chandef, local->hw.conf.channel, + local->hw.conf.channel_type); + cfg80211_radar_event(local->hw.wiphy, &chandef, GFP_KERNEL); + } +} + +void ieee80211_radar_detected(struct ieee80211_hw *hw) +{ + struct ieee80211_local *local = hw_to_local(hw); + + trace_api_radar_detected(local); + + ieee80211_queue_work(hw, &local->radar_detected_work); +} +EXPORT_SYMBOL(ieee80211_radar_detected); -- cgit v0.10.2 From 397a7a24ef8c2967a3e8090013f9c54714110c48 Mon Sep 17 00:00:00 2001 From: Michael Braun Date: Wed, 13 Feb 2013 16:49:15 +0100 Subject: mac80211: free ps->bc_buf skbs on vlan device stop When the vlan device is removed, ps->bc_buf processing can no longer send its frames. Signed-off-by: Michael Braun Signed-off-by: Johannes Berg diff --git a/net/mac80211/iface.c b/net/mac80211/iface.c index e9223ce..86c8308 100644 --- a/net/mac80211/iface.c +++ b/net/mac80211/iface.c @@ -680,6 +680,7 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, struct sk_buff *skb, *tmp; u32 hw_reconf_flags = 0; int i, flushed; + struct ps_data *ps; clear_bit(SDATA_STATE_RUNNING, &sdata->state); @@ -768,6 +769,19 @@ static void ieee80211_do_stop(struct ieee80211_sub_if_data *sdata, u.vlan.list) dev_close(vlan->dev); WARN_ON(!list_empty(&sdata->u.ap.vlans)); + } else if (sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { + /* remove all packets in parent bc_buf pointing to this dev */ + ps = &sdata->bss->ps; + + spin_lock_irqsave(&ps->bc_buf.lock, flags); + skb_queue_walk_safe(&ps->bc_buf, skb, tmp) { + if (skb->dev == sdata->dev) { + __skb_unlink(skb, &ps->bc_buf); + local->total_ps_buffered--; + ieee80211_free_txskb(&local->hw, skb); + } + } + spin_unlock_irqrestore(&ps->bc_buf.lock, flags); } else if (sdata->vif.type == NL80211_IFTYPE_STATION) { ieee80211_mgd_stop(sdata); } -- cgit v0.10.2 From de74a1d9032f4d37ea453ad2a647e1aff4cd2591 Mon Sep 17 00:00:00 2001 From: Michael Braun Date: Wed, 13 Feb 2013 16:49:16 +0100 Subject: mac80211: fix WPA with VLAN on AP side with ps-sta When sending a broadcast while at least on of the connected stations is sleeping, it gets queued and send after a DTIM beacon is sent. If the packet was to be sent on a vlan interface, the vif used for dequeing from the per-bss queue does not hold the per-vlan sdata. The correct sdata is required to use the correct per-vlan broadcast/multicast key. This patch fixes this by restoring the per-vlan sdata using the skb->dev entry. Signed-off-by: Michael Braun Signed-off-by: Johannes Berg diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index f476aa6..71385bf 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2785,6 +2785,7 @@ ieee80211_get_buffered_bc(struct ieee80211_hw *hw, cpu_to_le16(IEEE80211_FCTL_MOREDATA); } + sdata = IEEE80211_DEV_TO_SUB_IF(skb->dev); if (!ieee80211_tx_prepare(sdata, &tx, skb)) break; dev_kfree_skb_any(skb); -- cgit v0.10.2 From 39886b618aba3c39e650c191d601e26ec581ce0f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Wed, 13 Feb 2013 12:14:19 -0800 Subject: mac80211: consolidate MBSS change notification A few mesh utility functions will call ieee80211_bss_info_change_notify(), and then the caller might notify the driver of the same change again. Avoid this redundancy by propagating the BSS changes and generally calling bss_info_change_notify() once per change. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0969978..f4db306 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1262,9 +1262,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH + u32 changed = 0; if (sdata->u.mesh.security & IEEE80211_MESH_SEC_SECURED) { - u32 changed = 0; - switch (params->plink_state) { case NL80211_PLINK_ESTAB: if (sta->plink_state != NL80211_PLINK_ESTAB) @@ -1273,8 +1272,8 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->plink_state = params->plink_state; ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, - sdata->u.mesh.mshcfg.power_mode); + changed |= ieee80211_mps_set_sta_local_pm(sta, + sdata->u.mesh.mshcfg.power_mode); break; case NL80211_PLINK_LISTEN: case NL80211_PLINK_BLOCKED: @@ -1288,26 +1287,29 @@ static int sta_apply_parameters(struct ieee80211_local *local, sta->plink_state = params->plink_state; ieee80211_mps_sta_status_update(sta); - ieee80211_mps_local_status_update(sdata); + changed |= + ieee80211_mps_local_status_update(sdata); break; default: /* nothing */ break; } - ieee80211_bss_info_change_notify(sdata, changed); } else { switch (params->plink_action) { case PLINK_ACTION_OPEN: - mesh_plink_open(sta); + changed |= mesh_plink_open(sta); break; case PLINK_ACTION_BLOCK: - mesh_plink_block(sta); + changed |= mesh_plink_block(sta); break; } } if (params->local_pm) - ieee80211_mps_set_sta_local_pm(sta, params->local_pm); + changed |= + ieee80211_mps_set_sta_local_pm(sta, + params->local_pm); + ieee80211_bss_info_change_notify(sdata, changed); #endif } diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 2bf0158..0adec3d 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -675,7 +675,7 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.basic_rates = ieee80211_mandatory_rates(local, band); - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); ieee80211_bss_info_change_notify(sdata, changed); diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 3b9d862..7ad035f 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -245,9 +245,9 @@ void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); /* mesh power save */ -void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); -void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, - enum nl80211_mesh_power_mode pm); +u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); +u32 ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm); void ieee80211_mps_set_frame_flags(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_hdr *hdr); @@ -289,8 +289,8 @@ bool mesh_peer_accepts_plinks(struct ieee802_11_elems *ie); u32 mesh_accept_plinks_update(struct ieee80211_sub_if_data *sdata); void mesh_plink_broken(struct sta_info *sta); u32 mesh_plink_deactivate(struct sta_info *sta); -int mesh_plink_open(struct sta_info *sta); -void mesh_plink_block(struct sta_info *sta); +u32 mesh_plink_open(struct sta_info *sta); +u32 mesh_plink_block(struct sta_info *sta); void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len, struct ieee80211_rx_status *rx_status); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 56c9b31..a4c7a7e 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -202,7 +202,7 @@ static u32 __mesh_plink_deactivate(struct sta_info *sta) mesh_path_flush_by_nexthop(sta); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); return changed; } @@ -494,6 +494,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, struct ieee802_11_elems *elems) { struct sta_info *sta; + u32 changed = 0; sta = mesh_sta_info_get(sdata, hw_addr, elems); if (!sta) @@ -504,11 +505,12 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, sdata->u.mesh.accepting_plinks && sdata->u.mesh.mshcfg.auto_open_plinks && rssi_threshold_check(sta, sdata)) - mesh_plink_open(sta); + changed = mesh_plink_open(sta); ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); + ieee80211_bss_info_change_notify(sdata, changed); } static void mesh_plink_timer(unsigned long data) @@ -621,13 +623,14 @@ static inline void mesh_plink_timer_set(struct sta_info *sta, int timeout) add_timer(&sta->plink_timer); } -int mesh_plink_open(struct sta_info *sta) +u32 mesh_plink_open(struct sta_info *sta) { __le16 llid; struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 changed; if (!test_sta_flag(sta, WLAN_STA_AUTH)) - return -EPERM; + return 0; spin_lock_bh(&sta->lock); get_random_bytes(&llid, 2); @@ -635,7 +638,7 @@ int mesh_plink_open(struct sta_info *sta) if (sta->plink_state != NL80211_PLINK_LISTEN && sta->plink_state != NL80211_PLINK_BLOCKED) { spin_unlock_bh(&sta->lock); - return -EBUSY; + return 0; } sta->plink_state = NL80211_PLINK_OPN_SNT; mesh_plink_timer_set(sta, sdata->u.mesh.mshcfg.dot11MeshRetryTimeout); @@ -645,15 +648,15 @@ int mesh_plink_open(struct sta_info *sta) sta->sta.addr); /* set the non-peer mode to active during peering */ - ieee80211_mps_local_status_update(sdata); + changed = ieee80211_mps_local_status_update(sdata); - return mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, - sta->sta.addr, llid, 0, 0); + mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN, + sta->sta.addr, llid, 0, 0); + return changed; } -void mesh_plink_block(struct sta_info *sta) +u32 mesh_plink_block(struct sta_info *sta) { - struct ieee80211_sub_if_data *sdata = sta->sdata; u32 changed; spin_lock_bh(&sta->lock); @@ -661,7 +664,7 @@ void mesh_plink_block(struct sta_info *sta) sta->plink_state = NL80211_PLINK_BLOCKED; spin_unlock_bh(&sta->lock); - ieee80211_bss_info_change_notify(sdata, changed); + return changed; } @@ -882,7 +885,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mshcfg->dot11MeshRetryTimeout); /* set the non-peer mode to active during peering */ - ieee80211_mps_local_status_update(sdata); + changed |= ieee80211_mps_local_status_update(sdata); spin_unlock_bh(&sta->lock); mesh_plink_frame_tx(sdata, @@ -978,7 +981,7 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m mpl_dbg(sdata, "Mesh plink with %pM ESTABLISHED\n", sta->sta.addr); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, + changed |= ieee80211_mps_set_sta_local_pm(sta, mshcfg->power_mode); break; default: @@ -1020,8 +1023,8 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m WLAN_SP_MESH_PEERING_CONFIRM, sta->sta.addr, llid, plid, 0); ieee80211_mps_sta_status_update(sta); - ieee80211_mps_set_sta_local_pm(sta, - mshcfg->power_mode); + changed |= ieee80211_mps_set_sta_local_pm(sta, + mshcfg->power_mode); break; default: spin_unlock_bh(&sta->lock); diff --git a/net/mac80211/mesh_ps.c b/net/mac80211/mesh_ps.c index b677962..3b7bfc0 100644 --- a/net/mac80211/mesh_ps.c +++ b/net/mac80211/mesh_ps.c @@ -74,14 +74,17 @@ static void mps_qos_null_tx(struct sta_info *sta) * @sdata: local mesh subif * * sets the non-peer power mode and triggers the driver PS (re-)configuration + * Return BSS_CHANGED_BEACON if a beacon update is necessary. */ -void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) +u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct sta_info *sta; bool peering = false; int light_sleep_cnt = 0; int deep_sleep_cnt = 0; + u32 changed = 0; + enum nl80211_mesh_power_mode nonpeer_pm; rcu_read_lock(); list_for_each_entry_rcu(sta, &sdata->local->sta_list, list) { @@ -115,17 +118,26 @@ void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) */ if (peering) { mps_dbg(sdata, "setting non-peer PM to active for peering\n"); - ifmsh->nonpeer_pm = NL80211_MESH_POWER_ACTIVE; + nonpeer_pm = NL80211_MESH_POWER_ACTIVE; } else if (light_sleep_cnt || deep_sleep_cnt) { mps_dbg(sdata, "setting non-peer PM to deep sleep\n"); - ifmsh->nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; + nonpeer_pm = NL80211_MESH_POWER_DEEP_SLEEP; } else { mps_dbg(sdata, "setting non-peer PM to user value\n"); - ifmsh->nonpeer_pm = ifmsh->mshcfg.power_mode; + nonpeer_pm = ifmsh->mshcfg.power_mode; } + /* need update if sleep counts move between 0 and non-zero */ + if (ifmsh->nonpeer_pm != nonpeer_pm || + !ifmsh->ps_peers_light_sleep != !light_sleep_cnt || + !ifmsh->ps_peers_deep_sleep != !deep_sleep_cnt) + changed = BSS_CHANGED_BEACON; + + ifmsh->nonpeer_pm = nonpeer_pm; ifmsh->ps_peers_light_sleep = light_sleep_cnt; ifmsh->ps_peers_deep_sleep = deep_sleep_cnt; + + return changed; } /** @@ -133,9 +145,10 @@ void ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata) * * @sta: mesh STA * @pm: the power mode to set + * Return BSS_CHANGED_BEACON if a beacon update is in order. */ -void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, - enum nl80211_mesh_power_mode pm) +u32 ieee80211_mps_set_sta_local_pm(struct sta_info *sta, + enum nl80211_mesh_power_mode pm) { struct ieee80211_sub_if_data *sdata = sta->sdata; @@ -151,7 +164,7 @@ void ieee80211_mps_set_sta_local_pm(struct sta_info *sta, if (sta->plink_state == NL80211_PLINK_ESTAB) mps_qos_null_tx(sta); - ieee80211_mps_local_status_update(sdata); + return ieee80211_mps_local_status_update(sdata); } /** -- cgit v0.10.2 From cab1c7fd8024ce896119535b5b067224b0b699aa Mon Sep 17 00:00:00 2001 From: Wojciech Dubowik Date: Thu, 14 Feb 2013 14:08:37 +0100 Subject: mac80211: fix ieee80211_sta_tx_notify for nullfunc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Function ieee80211_sta_reset_conn_monitor has been resetting probe_send_count too early and nullfunc check was never called after succesfull ack. Reported-by: Magnus Cederlöf Tested-by: Magnus Cederlöf Signed-off-by: Wojciech Dubowik Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7d4cde7..c156573 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1637,17 +1637,18 @@ void ieee80211_sta_tx_notify(struct ieee80211_sub_if_data *sdata, if (!ieee80211_is_data(hdr->frame_control)) return; - if (ack) - ieee80211_sta_reset_conn_monitor(sdata); - if (ieee80211_is_nullfunc(hdr->frame_control) && sdata->u.mgd.probe_send_count > 0) { if (ack) - sdata->u.mgd.probe_send_count = 0; + ieee80211_sta_reset_conn_monitor(sdata); else sdata->u.mgd.nullfunc_failed = true; ieee80211_queue_work(&sdata->local->hw, &sdata->work); + return; } + + if (ack) + ieee80211_sta_reset_conn_monitor(sdata); } static void ieee80211_mgd_probe_ap_send(struct ieee80211_sub_if_data *sdata) -- cgit v0.10.2 From 89afe614c0c737fd40eda1f8c8ef686246cf3cb6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 15:39:57 +0100 Subject: mac80211: fix auth/assoc timeout handling In my commit 1672c0e31917f49d31d30d79067103432bc20cc7 ("mac80211: start auth/assoc timeout on frame status") I broke auth/assoc timeout handling: in case we wait for the TX status, it now leaves the timeout field set to 0, which is a valid time and can compare as being before now ("jiffies"). Thus, if the work struct runs for some other reason, the auth/assoc is treated as having timed out. Fix this by introducing a separate "timeout_started" variable that tracks whether the timeout has started and is checked before timing out. Additionally, for proper TX status handling the change requires that the skb->dev pointer is set up for all the frames, so set it up for all frames in mac80211. Reported-by: Wojciech Dubowik Tested-by: Wojciech Dubowik Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 0e0a977..52bf954 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -343,6 +343,7 @@ struct ieee80211_mgd_auth_data { u8 key[WLAN_KEY_LEN_WEP104]; u8 key_len, key_idx; bool done; + bool timeout_started; u16 sae_trans, sae_status; size_t data_len; @@ -364,6 +365,7 @@ struct ieee80211_mgd_assoc_data { bool wmm, uapsd; bool have_beacon, need_beacon; bool synced; + bool timeout_started; u8 ap_ht_param; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index c156573..a7fb276 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2000,6 +2000,7 @@ ieee80211_rx_mgmt_auth(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "authenticated\n"); ifmgd->auth_data->done = true; ifmgd->auth_data->timeout = jiffies + IEEE80211_AUTH_WAIT_ASSOC; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, ifmgd->auth_data->timeout); if (ifmgd->auth_data->algorithm == WLAN_AUTH_SAE && @@ -2334,6 +2335,7 @@ ieee80211_rx_mgmt_assoc_resp(struct ieee80211_sub_if_data *sdata, "%pM rejected association temporarily; comeback duration %u TU (%u ms)\n", mgmt->sa, tu, ms); assoc_data->timeout = jiffies + msecs_to_jiffies(ms); + assoc_data->timeout_started = true; if (ms > IEEE80211_ASSOC_TIMEOUT) run_again(ifmgd, assoc_data->timeout); return RX_MGMT_NONE; @@ -2457,6 +2459,7 @@ static void ieee80211_rx_mgmt_probe_resp(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "direct probe responded\n"); ifmgd->auth_data->tries = 0; ifmgd->auth_data->timeout = jiffies; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, ifmgd->auth_data->timeout); } } @@ -2542,6 +2545,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } /* continue assoc process */ ifmgd->assoc_data->timeout = jiffies; + ifmgd->assoc_data->timeout_started = true; run_again(ifmgd, ifmgd->assoc_data->timeout); return; } @@ -2934,7 +2938,10 @@ static int ieee80211_probe_auth(struct ieee80211_sub_if_data *sdata) if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { auth_data->timeout = jiffies + IEEE80211_AUTH_TIMEOUT; + ifmgd->auth_data->timeout_started = true; run_again(ifmgd, auth_data->timeout); + } else { + auth_data->timeout_started = false; } return 0; @@ -2968,7 +2975,10 @@ static int ieee80211_do_assoc(struct ieee80211_sub_if_data *sdata) if (!(local->hw.flags & IEEE80211_HW_REPORTS_TX_ACK_STATUS)) { assoc_data->timeout = jiffies + IEEE80211_ASSOC_TIMEOUT; + assoc_data->timeout_started = true; run_again(&sdata->u.mgd, assoc_data->timeout); + } else { + assoc_data->timeout_started = false; } return 0; @@ -3007,6 +3017,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } else { ifmgd->auth_data->timeout = jiffies - 1; } + ifmgd->auth_data->timeout_started = true; } else if (ifmgd->assoc_data && (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))) { @@ -3017,10 +3028,11 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) } else { ifmgd->assoc_data->timeout = jiffies - 1; } + ifmgd->assoc_data->timeout_started = true; } } - if (ifmgd->auth_data && + if (ifmgd->auth_data && ifmgd->auth_data->timeout_started && time_after(jiffies, ifmgd->auth_data->timeout)) { if (ifmgd->auth_data->done) { /* @@ -3039,10 +3051,10 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) cfg80211_send_auth_timeout(sdata->dev, bssid); mutex_lock(&ifmgd->mtx); } - } else if (ifmgd->auth_data) + } else if (ifmgd->auth_data && ifmgd->auth_data->timeout_started) run_again(ifmgd, ifmgd->auth_data->timeout); - if (ifmgd->assoc_data && + if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started && time_after(jiffies, ifmgd->assoc_data->timeout)) { if ((ifmgd->assoc_data->need_beacon && !ifmgd->assoc_data->have_beacon) || @@ -3057,7 +3069,7 @@ void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata) cfg80211_send_assoc_timeout(sdata->dev, bssid); mutex_lock(&ifmgd->mtx); } - } else if (ifmgd->assoc_data) + } else if (ifmgd->assoc_data && ifmgd->assoc_data->timeout_started) run_again(ifmgd, ifmgd->assoc_data->timeout); if (ifmgd->flags & (IEEE80211_STA_BEACON_POLL | @@ -4032,6 +4044,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, sdata_info(sdata, "waiting for beacon from %pM\n", ifmgd->bssid); assoc_data->timeout = TU_TO_EXP_TIME(req->bss->beacon_interval); + assoc_data->timeout_started = true; assoc_data->need_beacon = true; } else if (beacon_ies) { const u8 *tim_ie = cfg80211_find_ie(WLAN_EID_TIM, @@ -4047,6 +4060,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, } assoc_data->have_beacon = true; assoc_data->timeout = jiffies; + assoc_data->timeout_started = true; if (local->hw.flags & IEEE80211_HW_TIMING_BEACON_ONLY) { sdata->vif.bss_conf.sync_tsf = beacon_ies->tsf; @@ -4056,6 +4070,7 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata, } } else { assoc_data->timeout = jiffies; + assoc_data->timeout_started = true; } rcu_read_unlock(); diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 19db20a..fb3b586 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -1120,6 +1120,8 @@ static void ieee80211_send_null_response(struct ieee80211_sub_if_data *sdata, drv_allow_buffered_frames(local, sta, BIT(tid), 1, reason, false); + skb->dev = sdata->dev; + rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 71385bf..f4c89f5 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2818,6 +2818,8 @@ void __ieee80211_tx_skb_tid_band(struct ieee80211_sub_if_data *sdata, skb_set_queue_mapping(skb, ac); skb->priority = tid; + skb->dev = sdata->dev; + /* * The other path calling ieee80211_xmit is from the tasklet, * and while we can handle concurrent transmissions locking -- cgit v0.10.2 From 5bbe754d9ecc4a09994ecd0cf3b167224e114da5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 13:50:51 +0100 Subject: mac80211: don't call bss_info_changed on p2p-device/monitor Since the idle decision rework, mac80211 started calling bss_info_changed() for the driver's monitor interface, which causes a crash for iwlwifi, but drivers generally don't expect this to happen. Therefore, avoid it. While at it, also prevent calling it in such cases and only print a warning. For the P2P Device interface the idle will no longer be called (no channel context), so also prevent that and warn on it. Reported-by: Chaitanya Signed-off-by: Johannes Berg diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 2e6faed..d91ccfc 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -137,7 +137,10 @@ static int ieee80211_assign_vif_chanctx(struct ieee80211_sub_if_data *sdata, ieee80211_recalc_txpower(sdata); sdata->vif.bss_conf.idle = false; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && + sdata->vif.type != NL80211_IFTYPE_MONITOR) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); return 0; } @@ -186,7 +189,10 @@ static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, rcu_assign_pointer(sdata->vif.chanctx_conf, NULL); sdata->vif.bss_conf.idle = true; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); + + if (sdata->vif.type != NL80211_IFTYPE_P2P_DEVICE && + sdata->vif.type != NL80211_IFTYPE_MONITOR) + ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_IDLE); drv_unassign_vif_chanctx(local, sdata, ctx); diff --git a/net/mac80211/driver-ops.h b/net/mac80211/driver-ops.h index 2b08b99..ee56d07 100644 --- a/net/mac80211/driver-ops.h +++ b/net/mac80211/driver-ops.h @@ -207,13 +207,16 @@ static inline void drv_bss_info_changed(struct ieee80211_local *local, { might_sleep(); - WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | - BSS_CHANGED_BEACON_ENABLED) && - sdata->vif.type != NL80211_IFTYPE_AP && - sdata->vif.type != NL80211_IFTYPE_ADHOC && - sdata->vif.type != NL80211_IFTYPE_MESH_POINT); - WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE && - changed & ~BSS_CHANGED_IDLE); + if (WARN_ON_ONCE(changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_BEACON_ENABLED) && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT)) + return; + + if (WARN_ON_ONCE(sdata->vif.type == NL80211_IFTYPE_P2P_DEVICE || + sdata->vif.type == NL80211_IFTYPE_MONITOR)) + return; check_sdata_in_driver(sdata); -- cgit v0.10.2 From 5b36ebd8249f403c7edf7cf68d68e9a0d0f55243 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 14:21:45 +0100 Subject: mac80211: always unblock CSA queue stop when disconnecting In some cases when disconnecting after (or during?) CSA the queues might not recover, and then the only way to recover is reloading the module. Fix this by always unblocking the queue CSA reason when disconnecting. Cc: stable@vger.kernel.org Reported-by: Jan-Michael Brummer Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index a7fb276..99be3b6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1819,6 +1819,8 @@ static void __ieee80211_disconnect(struct ieee80211_sub_if_data *sdata) WLAN_REASON_DISASSOC_DUE_TO_INACTIVITY, true, frame_buf); ifmgd->flags &= ~IEEE80211_STA_CSA_RECEIVED; + ieee80211_wake_queues_by_reason(&sdata->local->hw, + IEEE80211_QUEUE_STOP_REASON_CSA); mutex_unlock(&ifmgd->mtx); /* @@ -1859,8 +1861,6 @@ static void ieee80211_csa_connection_drop_work(struct work_struct *work) container_of(work, struct ieee80211_sub_if_data, u.mgd.csa_connection_drop_work); - ieee80211_wake_queues_by_reason(&sdata->local->hw, - IEEE80211_QUEUE_STOP_REASON_CSA); __ieee80211_disconnect(sdata); } -- cgit v0.10.2 From 441a33baf1805861354fb9e3149c000311b6996f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 16:27:04 +0100 Subject: mac80211: don't pick up WPA vendor IE There's no use for it, WPA is entirely handled in wpa_supplicant in userspace, so don't pick the IE. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 52bf954..8f95644 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1175,7 +1175,6 @@ struct ieee802_11_elems { struct ieee80211_tim_ie *tim; u8 *ibss_params; u8 *challenge; - u8 *wpa; u8 *rsn; u8 *erp_info; u8 *ext_supp_rates; @@ -1208,7 +1207,6 @@ struct ieee802_11_elems { u8 tim_len; u8 ibss_params_len; u8 challenge_len; - u8 wpa_len; u8 rsn_len; u8 erp_info_len; u8 ext_supp_rates_len; diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 218cb52..b231bc2 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -739,11 +739,7 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, if (calc_crc) crc = crc32_be(crc, pos - 2, elen + 2); - if (pos[3] == 1) { - /* OUI Type 1 - WPA IE */ - elems->wpa = pos; - elems->wpa_len = elen; - } else if (elen >= 5 && pos[3] == 2) { + if (elen >= 5 && pos[3] == 2) { /* OUI Type 2 - WMM IE */ if (pos[4] == 0) { elems->wmm_info = pos; -- cgit v0.10.2 From 65f704a52ec5db356c58f8ba53a31d3aef02737f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 17:39:53 +0100 Subject: mac80211: use spin_lock_bh() for tim_lock There's no need to use _irqsave() as the lock is never used in interrupt context. This also fixes a problem in the iwlwifi MVM driver that calls spin_unlock_bh() within its set_tim() callback. Signed-off-by: Johannes Berg diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index fb3b586..0794b90 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -571,7 +571,6 @@ void sta_info_recalc_tim(struct sta_info *sta) { struct ieee80211_local *local = sta->local; struct ps_data *ps; - unsigned long flags; bool indicate_tim = false; u8 ignore_for_tim = sta->sta.uapsd_queues; int ac; @@ -628,7 +627,7 @@ void sta_info_recalc_tim(struct sta_info *sta) } done: - spin_lock_irqsave(&local->tim_lock, flags); + spin_lock_bh(&local->tim_lock); if (indicate_tim) __bss_tim_set(ps->tim, id); @@ -641,7 +640,7 @@ void sta_info_recalc_tim(struct sta_info *sta) local->tim_in_locked_section = false; } - spin_unlock_irqrestore(&local->tim_lock, flags); + spin_unlock_bh(&local->tim_lock); } static bool sta_info_buffer_expired(struct sta_info *sta, struct sk_buff *skb) diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index f4c89f5..7d8c629 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2364,11 +2364,9 @@ static int ieee80211_beacon_add_tim(struct ieee80211_sub_if_data *sdata, if (local->tim_in_locked_section) { __ieee80211_beacon_add_tim(sdata, ps, skb); } else { - unsigned long flags; - - spin_lock_irqsave(&local->tim_lock, flags); + spin_lock(&local->tim_lock); __ieee80211_beacon_add_tim(sdata, ps, skb); - spin_unlock_irqrestore(&local->tim_lock, flags); + spin_unlock(&local->tim_lock); } return 0; -- cgit v0.10.2 From 03395003bf8ac813b1a0ac9299b3496484caf228 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 13 Feb 2013 18:03:00 +0100 Subject: mac80211: use spin_lock_bh() for TKIP lock Since no driver calls the TKIP functions from interrupt context, there's no need to use spin_lock_irqsave(). Just use spin_lock_bh() (and spin_lock() in the TX path where we're in a BH or they're already disabled.) Signed-off-by: Johannes Berg diff --git a/net/mac80211/tkip.c b/net/mac80211/tkip.c index 57e14d5..3ed801d 100644 --- a/net/mac80211/tkip.c +++ b/net/mac80211/tkip.c @@ -177,12 +177,11 @@ void ieee80211_get_tkip_p1k_iv(struct ieee80211_key_conf *keyconf, struct ieee80211_key *key = (struct ieee80211_key *) container_of(keyconf, struct ieee80211_key, conf); struct tkip_ctx *ctx = &key->u.tkip.tx; - unsigned long flags; - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock_bh(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); memcpy(p1k, ctx->p1k, sizeof(ctx->p1k)); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock_bh(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p1k_iv); @@ -208,12 +207,11 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf, const u8 *data = (u8 *)hdr + ieee80211_hdrlen(hdr->frame_control); u32 iv32 = get_unaligned_le32(&data[4]); u16 iv16 = data[2] | (data[0] << 8); - unsigned long flags; - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock_bh(&key->u.tkip.txlock); ieee80211_compute_tkip_p1k(key, iv32); tkip_mixing_phase2(tk, ctx, iv16, p2k); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock_bh(&key->u.tkip.txlock); } EXPORT_SYMBOL(ieee80211_get_tkip_p2k); diff --git a/net/mac80211/wpa.c b/net/mac80211/wpa.c index c175ee8..c7c6d64 100644 --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c @@ -181,7 +181,6 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data; struct ieee80211_key *key = tx->key; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); - unsigned long flags; unsigned int hdrlen; int len, tail; u8 *pos; @@ -216,12 +215,12 @@ static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) return 0; /* Increase IV for the frame */ - spin_lock_irqsave(&key->u.tkip.txlock, flags); + spin_lock(&key->u.tkip.txlock); key->u.tkip.tx.iv16++; if (key->u.tkip.tx.iv16 == 0) key->u.tkip.tx.iv32++; pos = ieee80211_tkip_add_iv(pos, key); - spin_unlock_irqrestore(&key->u.tkip.txlock, flags); + spin_unlock(&key->u.tkip.txlock); /* hwaccel - with software IV */ if (info->control.hw_key) -- cgit v0.10.2 From 4a34215ef7487b1cbd783e7cc485eb03de893bd0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 11:58:58 +0100 Subject: mac80211: pass station to ieee80211_vht_cap_ie_to_sta_vht_cap Like with HT, make things a bit simpler in future patches by passing the station to ieee80211_vht_cap_ie_to_sta_vht_cap() instead of the vht_cap pointer. Also disable VHT here if HT isn't supported. Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9b17930..9c9496d 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1257,8 +1257,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, - params->vht_capa, - &sta->sta.vht_cap); + params->vht_capa, sta); if (ieee80211_vif_is_mesh(&sdata->vif)) { #ifdef CONFIG_MAC80211_MESH diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 8f95644..9206d43 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1430,7 +1430,8 @@ u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs); void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, - struct ieee80211_sta_vht_cap *vht_cap); + struct sta_info *sta); + /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index ac1374a..58b6e67 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2217,8 +2217,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, - elems.vht_cap_elem, - &sta->sta.vht_cap); + elems.vht_cap_elem, sta); rate_control_rate_init(sta); diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index f311388..1606aa1 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -15,13 +15,15 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, - struct ieee80211_sta_vht_cap *vht_cap) + struct sta_info *sta) { - if (WARN_ON_ONCE(!vht_cap)) - return; + struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; memset(vht_cap, 0, sizeof(*vht_cap)); + if (!sta->sta.ht_cap.ht_supported) + return; + if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; -- cgit v0.10.2 From e1a0c6b3a4b27ed5f21291d0bbee2167ec201ef5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 11:47:44 +0100 Subject: mac80211: stop toggling IEEE80211_HT_CAP_SUP_WIDTH_20_40 For VHT, many more bandwidth changes are possible. As a first step, stop toggling the IEEE80211_HT_CAP_SUP_WIDTH_20_40 flag in the HT capabilities and instead introduce a bandwidth field indicating the currently usable bandwidth to transmit to the station. Of course, make all drivers use it. To achieve this, make ieee80211_ht_cap_ie_to_sta_ht_cap() get the station as an argument, rather than the new capabilities, so it can set up the new bandwidth field. If the station is a VHT station and VHT bandwidth is in use, also set the bandwidth accordingly. Doing this allows us to get rid of the supports_40mhz flag as the HT capabilities now reflect the true capability instead of the current setting. While at it, also fix ieee80211_ht_cap_ie_to_sta_ht_cap() to not ignore HT cap overrides when MCS TX isn't supported (not that it really happens...) Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/ath/ath9k/rc.c b/drivers/net/wireless/ath/ath9k/rc.c index 714558d..54150b6 100644 --- a/drivers/net/wireless/ath/ath9k/rc.c +++ b/drivers/net/wireless/ath/ath9k/rc.c @@ -1204,7 +1204,7 @@ static u8 ath_rc_build_ht_caps(struct ath_softc *sc, struct ieee80211_sta *sta) caps |= WLAN_RC_TS_FLAG | WLAN_RC_DS_FLAG; else if (sta->ht_cap.mcs.rx_mask[1]) caps |= WLAN_RC_DS_FLAG; - if (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + if (sta->bandwidth >= IEEE80211_STA_RX_BW_40) { caps |= WLAN_RC_40_FLAG; if (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) caps |= WLAN_RC_SGI_FLAG; diff --git a/drivers/net/wireless/iwlwifi/dvm/agn.h b/drivers/net/wireless/iwlwifi/dvm/agn.h index f41ae79..41ec27c 100644 --- a/drivers/net/wireless/iwlwifi/dvm/agn.h +++ b/drivers/net/wireless/iwlwifi/dvm/agn.h @@ -338,7 +338,7 @@ int iwl_sta_update_ht(struct iwl_priv *priv, struct iwl_rxon_context *ctx, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap); + struct ieee80211_sta *sta); static inline int iwl_sta_id(struct ieee80211_sta *sta) { diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index a131227..b25de02 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1305,7 +1305,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1361,7 +1361,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1410,7 +1410,7 @@ static int rs_switch_to_siso(struct iwl_priv *priv, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index ab76804..6deab38 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -173,7 +173,7 @@ int iwl_send_add_sta(struct iwl_priv *priv, bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, struct iwl_rxon_context *ctx, - struct ieee80211_sta_ht_cap *ht_cap) + struct ieee80211_sta *sta) { if (!ctx->ht.enabled || !ctx->ht.is_40mhz) return false; @@ -183,20 +183,11 @@ bool iwl_is_ht40_tx_allowed(struct iwl_priv *priv, return false; #endif - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) + /* special case for RXON */ + if (!sta) return true; - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, @@ -246,7 +237,7 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, *flags |= cpu_to_le32( (u32)sta_ht_inf->ampdu_density << STA_FLG_AGG_MPDU_DENSITY_POS); - if (iwl_is_ht40_tx_allowed(priv, ctx, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(priv, ctx, sta)) *flags |= STA_FLG_HT40_EN_MSK; } diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 60a4291..8ba36e5 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1209,23 +1209,9 @@ static s32 rs_get_best_rate(struct iwl_mvm *mvm, return new_rate; } -static bool iwl_is_ht40_tx_allowed(struct iwl_mvm *mvm, - struct ieee80211_sta_ht_cap *ht_cap) +static bool iwl_is_ht40_tx_allowed(struct ieee80211_sta *sta) { - /* - * Remainder of this function checks ht_cap, but if it's - * NULL then we can do HT40 (special case for RXON) - */ - if (!ht_cap) - return true; - - if (!ht_cap->ht_supported) - return false; - - if (!(ht_cap->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - return false; - - return true; + return sta->bandwidth >= IEEE80211_STA_RX_BW_40; } /* @@ -1258,7 +1244,7 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_mimo2_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1311,7 +1297,7 @@ static int rs_switch_to_mimo3(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_11N_MIMO3_SEARCH; rate_mask = lq_sta->active_mimo3_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; @@ -1356,7 +1342,7 @@ static int rs_switch_to_siso(struct iwl_mvm *mvm, tbl->max_search = IWL_MAX_SEARCH; rate_mask = lq_sta->active_siso_rate; - if (iwl_is_ht40_tx_allowed(mvm, &sta->ht_cap)) + if (iwl_is_ht40_tx_allowed(sta)) tbl->is_ht40 = 1; else tbl->is_ht40 = 0; diff --git a/drivers/net/wireless/rtlwifi/base.c b/drivers/net/wireless/rtlwifi/base.c index 4494d13..84ea04d 100644 --- a/drivers/net/wireless/rtlwifi/base.c +++ b/drivers/net/wireless/rtlwifi/base.c @@ -523,8 +523,8 @@ static void _rtl_query_shortgi(struct ieee80211_hw *hw, if (mac->opmode == NL80211_IFTYPE_STATION) bw_40 = mac->bw_40; else if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) - bw_40 = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + mac->opmode == NL80211_IFTYPE_ADHOC) + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; if (bw_40 && sgi_40) tcb_desc->use_shortgi = true; @@ -634,8 +634,7 @@ static void _rtl_query_bandwidth_mode(struct ieee80211_hw *hw, return; if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { - if (!(sta->ht_cap.ht_supported) || - !(sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + if (sta->bandwidth == IEEE80211_STA_RX_BW_20) return; } else if (mac->opmode == NL80211_IFTYPE_STATION) { if (!mac->bw_40 || !(sta->ht_cap.ht_supported)) diff --git a/drivers/net/wireless/rtlwifi/rc.c b/drivers/net/wireless/rtlwifi/rc.c index 204f46c..c12a866 100644 --- a/drivers/net/wireless/rtlwifi/rc.c +++ b/drivers/net/wireless/rtlwifi/rc.c @@ -116,9 +116,8 @@ static void _rtl_rc_rate_set_series(struct rtl_priv *rtlpriv, if (txrc->short_preamble) rate->flags |= IEEE80211_TX_RC_USE_SHORT_PREAMBLE; if (mac->opmode == NL80211_IFTYPE_AP || - mac->opmode == NL80211_IFTYPE_ADHOC) { - if (sta && (sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + mac->opmode == NL80211_IFTYPE_ADHOC) { + if (sta && (sta->bandwidth >= IEEE80211_STA_RX_BW_40)) rate->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; } else { if (mac->bw_40) diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c index d1f34f6..1b65db7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/hw.c @@ -1846,9 +1846,9 @@ static void rtl92ce_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; - u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; + u8 curshortgi_40mhz = curtxbw_40mhz && + (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? 1 : 0; diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c index da0e902..b9b1a6e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192ce/trx.c @@ -626,8 +626,7 @@ void rtl92ce_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c index f4051f4..aa5b425 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/hw.c @@ -1970,8 +1970,7 @@ static void rtl92de_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c index cdb570f..941080e 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192de/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192de/trx.c @@ -574,8 +574,7 @@ void rtl92de_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; rtl_get_tcb_desc(hw, info, sta, skb, ptcb_desc); diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c index 28526a7..084e777 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/hw.c @@ -2085,8 +2085,7 @@ static void rtl92se_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index = 0; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c index f8431a3..7b0a2e7 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192se/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192se/trx.c @@ -621,8 +621,7 @@ void rtl92se_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c index 1498048..9a0c71c 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/hw.c @@ -1866,8 +1866,7 @@ static void rtl8723ae_update_hal_rate_mask(struct ieee80211_hw *hw, struct rtl_sta_info *sta_entry = NULL; u32 ratr_bitmap; u8 ratr_index; - u8 curtxbw_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) - ? 1 : 0; + u8 curtxbw_40mhz = (sta->bandwidth >= IEEE80211_STA_RX_BW_40) ? 1 : 0; u8 curshortgi_40mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_40) ? 1 : 0; u8 curshortgi_20mhz = (sta->ht_cap.cap & IEEE80211_HT_CAP_SGI_20) ? diff --git a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c index b1fd2b3..ac08129 100644 --- a/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8723ae/trx.c @@ -395,8 +395,7 @@ void rtl8723ae_tx_fill_desc(struct ieee80211_hw *hw, } else if (mac->opmode == NL80211_IFTYPE_AP || mac->opmode == NL80211_IFTYPE_ADHOC) { if (sta) - bw_40 = sta->ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bw_40 = sta->bandwidth >= IEEE80211_STA_RX_BW_40; } seq_number = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4; diff --git a/drivers/net/wireless/ti/wl18xx/main.c b/drivers/net/wireless/ti/wl18xx/main.c index a10b7a7..da3ef1b 100644 --- a/drivers/net/wireless/ti/wl18xx/main.c +++ b/drivers/net/wireless/ti/wl18xx/main.c @@ -1374,7 +1374,7 @@ static void wl18xx_sta_rc_update(struct wl1271 *wl, struct ieee80211_sta *sta, u32 changed) { - bool wide = sta->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + bool wide = sta->bandwidth >= IEEE80211_STA_RX_BW_40; wl1271_debug(DEBUG_MAC80211, "mac80211 sta_rc_update wide %d", wide); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 7241962..1e3b4f7 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1197,6 +1197,24 @@ enum ieee80211_sta_state { }; /** + * enum ieee80211_sta_rx_bandwidth - station RX bandwidth + * @IEEE80211_STA_RX_BW_20: station can only receive 20 MHz + * @IEEE80211_STA_RX_BW_40: station can receive up to 40 MHz + * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz + * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz + * (including 80+80 MHz) + * + * Implementation note: 20 must be zero to be initialized + * correctly, the values must be sorted. + */ +enum ieee80211_sta_rx_bandwidth { + IEEE80211_STA_RX_BW_20 = 0, + IEEE80211_STA_RX_BW_40, + IEEE80211_STA_RX_BW_80, + IEEE80211_STA_RX_BW_160, +}; + +/** * struct ieee80211_sta - station table entry * * A station table entry represents a station we are possibly @@ -1218,6 +1236,7 @@ enum ieee80211_sta_state { * @uapsd_queues: bitmap of queues configured for uapsd. Only valid * if wme is supported. * @max_sp: max Service Period. Only valid if wme is supported. + * @bandwidth: current bandwidth the station can receive with */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1228,6 +1247,7 @@ struct ieee80211_sta { bool wme; u8 uapsd_queues; u8 max_sp; + enum ieee80211_sta_rx_bandwidth bandwidth; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); @@ -2086,7 +2106,9 @@ enum ieee80211_frame_release_type { * enum ieee80211_rate_control_changed - flags to indicate what changed * * @IEEE80211_RC_BW_CHANGED: The bandwidth that can be used to transmit - * to this station changed. + * to this station changed. The actual bandwidth is in the station + * information -- for HT20/40 the IEEE80211_HT_CAP_SUP_WIDTH_20_40 + * flag changes, for HT and VHT the bandwidth field changes. * @IEEE80211_RC_SMPS_CHANGED: The SMPS state of the station changed. * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer * changed (in IBSS mode) due to discovering more information about diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 9c9496d..c3869ba 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1252,8 +1252,7 @@ static int sta_apply_parameters(struct ieee80211_local *local, if (params->ht_capa) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - params->ht_capa, - &sta->sta.ht_cap); + params->ht_capa, sta); if (params->vht_capa) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 9e7560b..a64b4f0 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -37,6 +37,9 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, u8 *smask = (u8 *)(&sdata->u.mgd.ht_capa_mask.mcs.rx_mask); int i; + if (!ht_cap->ht_supported) + return; + if (sdata->vif.type != NL80211_IFTYPE_STATION) { /* AP interfaces call this code when adding new stations, * so just silently ignore non station interfaces. @@ -89,22 +92,23 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, } -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap) + struct sta_info *sta) { + struct ieee80211_sta_ht_cap ht_cap; u8 ampdu_info, tx_mcs_set_cap; int i, max_tx_streams; + bool changed; + enum ieee80211_sta_rx_bandwidth bw; - BUG_ON(!ht_cap); - - memset(ht_cap, 0, sizeof(*ht_cap)); + memset(&ht_cap, 0, sizeof(ht_cap)); if (!ht_cap_ie || !sband->ht_cap.ht_supported) - return; + goto apply; - ht_cap->ht_supported = true; + ht_cap.ht_supported = true; /* * The bits listed in this expression should be @@ -112,7 +116,7 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * advertises more then we can't use those thus * we mask them out. */ - ht_cap->cap = le16_to_cpu(ht_cap_ie->cap_info) & + ht_cap.cap = le16_to_cpu(ht_cap_ie->cap_info) & (sband->ht_cap.cap | ~(IEEE80211_HT_CAP_LDPC_CODING | IEEE80211_HT_CAP_SUP_WIDTH_20_40 | @@ -121,44 +125,30 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, IEEE80211_HT_CAP_SGI_40 | IEEE80211_HT_CAP_DSSSCCK40)); - /* Unset 40 MHz if we're not using a 40 MHz channel */ - switch (sdata->vif.bss_conf.chandef.width) { - case NL80211_CHAN_WIDTH_20_NOHT: - case NL80211_CHAN_WIDTH_20: - ht_cap->cap &= ~IEEE80211_HT_CAP_SGI_40; - ht_cap->cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - break; - case NL80211_CHAN_WIDTH_40: - case NL80211_CHAN_WIDTH_80: - case NL80211_CHAN_WIDTH_80P80: - case NL80211_CHAN_WIDTH_160: - break; - } - /* * The STBC bits are asymmetric -- if we don't have * TX then mask out the peer's RX and vice versa. */ if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_TX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_RX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_RX_STBC; if (!(sband->ht_cap.cap & IEEE80211_HT_CAP_RX_STBC)) - ht_cap->cap &= ~IEEE80211_HT_CAP_TX_STBC; + ht_cap.cap &= ~IEEE80211_HT_CAP_TX_STBC; ampdu_info = ht_cap_ie->ampdu_params_info; - ht_cap->ampdu_factor = + ht_cap.ampdu_factor = ampdu_info & IEEE80211_HT_AMPDU_PARM_FACTOR; - ht_cap->ampdu_density = + ht_cap.ampdu_density = (ampdu_info & IEEE80211_HT_AMPDU_PARM_DENSITY) >> 2; /* own MCS TX capabilities */ tx_mcs_set_cap = sband->ht_cap.mcs.tx_params; /* Copy peer MCS TX capabilities, the driver might need them. */ - ht_cap->mcs.tx_params = ht_cap_ie->mcs.tx_params; + ht_cap.mcs.tx_params = ht_cap_ie->mcs.tx_params; /* can we TX with MCS rates? */ if (!(tx_mcs_set_cap & IEEE80211_HT_MCS_TX_DEFINED)) - return; + goto apply; /* Counting from 0, therefore +1 */ if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_RX_DIFF) @@ -176,25 +166,53 @@ void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, * - remainder are multiple spatial streams using unequal modulation */ for (i = 0; i < max_tx_streams; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; if (tx_mcs_set_cap & IEEE80211_HT_MCS_TX_UNEQUAL_MODULATION) for (i = IEEE80211_HT_MCS_UNEQUAL_MODULATION_START_BYTE; i < IEEE80211_HT_MCS_MASK_LEN; i++) - ht_cap->mcs.rx_mask[i] = + ht_cap.mcs.rx_mask[i] = sband->ht_cap.mcs.rx_mask[i] & ht_cap_ie->mcs.rx_mask[i]; /* handle MCS rate 32 too */ if (sband->ht_cap.mcs.rx_mask[32/8] & ht_cap_ie->mcs.rx_mask[32/8] & 1) - ht_cap->mcs.rx_mask[32/8] |= 1; + ht_cap.mcs.rx_mask[32/8] |= 1; + apply: /* * If user has specified capability over-rides, take care * of that here. */ - ieee80211_apply_htcap_overrides(sdata, ht_cap); + ieee80211_apply_htcap_overrides(sdata, &ht_cap); + + changed = memcmp(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + memcpy(&sta->sta.ht_cap, &ht_cap, sizeof(ht_cap)); + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + bw = IEEE80211_STA_RX_BW_20; + break; + case NL80211_CHAN_WIDTH_40: + case NL80211_CHAN_WIDTH_80: + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + bw = ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + break; + } + + if (bw != sta->sta.bandwidth) + changed = true; + sta->sta.bandwidth = bw; + + return changed; } void ieee80211_sta_tear_down_BA_sessions(struct sta_info *sta, diff --git a/net/mac80211/ibss.c b/net/mac80211/ibss.c index 2db1f2b..40b71df 100644 --- a/net/mac80211/ibss.c +++ b/net/mac80211/ibss.c @@ -496,33 +496,26 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, if (sta && elems->ht_operation && elems->ht_cap_elem && sdata->u.ibss.channel_type != NL80211_CHAN_NO_HT) { /* we both use HT */ - struct ieee80211_sta_ht_cap sta_ht_cap_new; + struct ieee80211_ht_cap htcap_ie; struct cfg80211_chan_def chandef; ieee80211_ht_oper_to_chandef(channel, elems->ht_operation, &chandef); - ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta_ht_cap_new); + memcpy(&htcap_ie, elems->ht_cap_elem, sizeof(htcap_ie)); /* * fall back to HT20 if we don't use or use * the other extension channel */ - if (chandef.width != NL80211_CHAN_WIDTH_40 || - cfg80211_get_chandef_type(&chandef) != + if (cfg80211_get_chandef_type(&chandef) != sdata->u.ibss.channel_type) - sta_ht_cap_new.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - - if (memcmp(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new))) { - memcpy(&sta->sta.ht_cap, &sta_ht_cap_new, - sizeof(sta_ht_cap_new)); - rates_updated = true; - } + htcap_ie.cap_info &= + cpu_to_le16(~IEEE80211_HT_CAP_SUP_WIDTH_20_40); + + rates_updated |= ieee80211_ht_cap_ie_to_sta_ht_cap( + sdata, sband, &htcap_ie, sta); } if (sta && rates_updated) { diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 9206d43..6b41d77 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1384,10 +1384,10 @@ void ieee80211_purge_tx_queue(struct ieee80211_hw *hw, /* HT */ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_ht_cap *ht_cap); -void ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, +bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_ht_cap *ht_cap_ie, - struct ieee80211_sta_ht_cap *ht_cap); + struct sta_info *sta); void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid, u16 initiator, u16 reason_code); @@ -1431,6 +1431,7 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, struct ieee80211_vht_cap *vht_cap_ie, struct sta_info *sta); +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index a4c7a7e..7765139 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -373,8 +373,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (elems->ht_cap_elem && sdata->vif.bss_conf.chandef.width != NL80211_CHAN_WIDTH_20_NOHT) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems->ht_cap_elem, - &sta->sta.ht_cap); + elems->ht_cap_elem, sta); else memset(&sta->sta.ht_cap, 0, sizeof(sta->sta.ht_cap)); @@ -383,8 +382,7 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata, if (!(elems->ht_operation->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; ieee80211_ht_oper_to_chandef(sdata->vif.bss_conf.chandef.chan, elems->ht_operation, &chandef); if (sta->ch_width != chandef.width) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 58b6e67..be11472 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -219,19 +219,20 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); - WARN_ON_ONCE(!sta); + if (WARN_ON_ONCE(!sta)) { + mutex_unlock(&local->sta_mtx); + return changed; + } - if (sta && !sta->supports_40mhz) + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) disable_40 = true; - if (sta && (!reconfig || - (disable_40 != !(sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40)))) { - + if (!reconfig || + disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { if (disable_40) - sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; else - sta->sta.ht_cap.cap |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); rate_control_rate_update(local, sband, sta, IEEE80211_RC_BW_CHANGED); @@ -2210,10 +2211,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, - elems.ht_cap_elem, &sta->sta.ht_cap); - - sta->supports_40mhz = - sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40; + elems.ht_cap_elem, sta); if (elems.vht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_VHT)) ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 6e35dcd..6176c71 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -848,8 +848,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, IEEE80211_HT_CAP_SM_PS_SHIFT; for (i = 0; i < ARRAY_SIZE(mi->groups); i++) { - u16 req = 0; - mi->groups[i].supported = 0; if (i == MINSTREL_CCK_GROUP) { minstrel_ht_update_cck(mp, mi, sband, sta); @@ -857,16 +855,17 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, } if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_SHORT_GI) { - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SGI_40; - else - req |= IEEE80211_HT_CAP_SGI_20; + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_40)) + continue; + } else { + if (!(sta_cap & IEEE80211_HT_CAP_SGI_20)) + continue; + } } - if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH) - req |= IEEE80211_HT_CAP_SUP_WIDTH_20_40; - - if ((sta_cap & req) != req) + if (minstrel_mcs_groups[i].flags & IEEE80211_TX_RC_40_MHZ_WIDTH && + sta->bandwidth < IEEE80211_STA_RX_BW_40) continue; /* Mark MCS > 7 as unsupported if STA is in static SMPS mode */ diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index b5f1bba..8a861a5 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2410,26 +2410,21 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) case WLAN_HT_ACTION_NOTIFY_CHANWIDTH: { struct ieee80211_supported_band *sband; u8 chanwidth = mgmt->u.action.u.ht_notify_cw.chanwidth; - bool old_40mhz, new_40mhz; + enum ieee80211_sta_rx_bandwidth new_bw; /* If it doesn't support 40 MHz it can't change ... */ - if (!rx->sta->supports_40mhz) + if (!(rx->sta->sta.ht_cap.cap & + IEEE80211_HT_CAP_SUP_WIDTH_20_40)) goto handled; - old_40mhz = rx->sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SUP_WIDTH_20_40; - new_40mhz = chanwidth == IEEE80211_HT_CHANWIDTH_ANY; + if (chanwidth == IEEE80211_HT_CHANWIDTH_20MHZ) + new_bw = IEEE80211_STA_RX_BW_20; + else + new_bw = ieee80211_sta_cur_vht_bw(rx->sta); - if (old_40mhz == new_40mhz) + if (rx->sta->sta.bandwidth == new_bw) goto handled; - if (new_40mhz) - rx->sta->sta.ht_cap.cap |= - IEEE80211_HT_CAP_SUP_WIDTH_20_40; - else - rx->sta->sta.ht_cap.cap &= - ~IEEE80211_HT_CAP_SUP_WIDTH_20_40; - sband = rx->local->hw.wiphy->bands[status->band]; rate_control_rate_update(local, sband, rx->sta, diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 350578c..03c42f8 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -296,8 +296,6 @@ struct sta_ampdu_mlme { * @sta: station information we share with the driver * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered - * @supports_40mhz: tracks whether the station advertised 40 MHz support - * as we overwrite its HT parameters with the currently used value * @rcu_head: RCU head used for freeing this station struct */ struct sta_info { @@ -403,8 +401,6 @@ struct sta_info { unsigned int lost_packets; unsigned int beacon_loss_count; - bool supports_40mhz; - /* keep last! */ struct ieee80211_sta sta; }; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 1606aa1..0fc9a2f 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -27,6 +27,10 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, if (!vht_cap_ie || !sband->vht_cap.vht_supported) return; + /* A VHT STA must support 40 MHz */ + if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) + return; + vht_cap->vht_supported = true; vht_cap->cap = le32_to_cpu(vht_cap_ie->vht_cap_info); @@ -34,4 +38,39 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, /* Copy peer MCS info, the driver might need them. */ memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, sizeof(struct ieee80211_vht_mcs_info)); + + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); +} + +enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) +{ + struct ieee80211_sub_if_data *sdata = sta->sdata; + u32 cap = sta->sta.vht_cap.cap; + + if (!sta->sta.vht_cap.vht_supported) + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + + /* TODO: handle VHT opmode notification data */ + + switch (sdata->vif.bss_conf.chandef.width) { + default: + WARN_ON_ONCE(1); + /* fall through */ + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + case NL80211_CHAN_WIDTH_40: + return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + case NL80211_CHAN_WIDTH_160: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80P80: + if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) + return IEEE80211_STA_RX_BW_160; + /* fall through */ + case NL80211_CHAN_WIDTH_80: + return IEEE80211_STA_RX_BW_80; + } } -- cgit v0.10.2 From 7bf9b9a0f0372d45b581f00173505fb76a9c5d23 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:45:41 +0100 Subject: wireless: define operating mode action frame Define the action frame format, the VHT category and its action types and the field format and EID for operating mode notifications. The frame may be used outside of VHT context as well, so don't include "VHT" in the names. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 7e8a498..67c1a6c 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -714,6 +714,30 @@ enum ieee80211_ht_chanwidth_values { IEEE80211_HT_CHANWIDTH_ANY = 1, }; +/** + * enum ieee80211_opmode_bits - VHT operating mode field bits + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK: channel width mask + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: 20 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask + * (the NSS value is the value of this field + 1) + * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift + * @IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF: indicates streams in SU-MIMO PPDU + * using a beamforming steering matrix + */ +enum ieee80211_vht_opmode_bits { + IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 3, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3, + IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70, + IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4, + IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 struct ieee80211_mgmt { @@ -844,6 +868,10 @@ struct ieee80211_mgmt { __le16 capability; u8 variable[0]; } __packed tdls_discover_resp; + struct { + u8 action_code; + u8 operating_mode; + } __packed vht_opmode_notif; } u; } __packed action; } u; @@ -1598,6 +1626,7 @@ enum ieee80211_eid { WLAN_EID_VHT_CAPABILITY = 191, WLAN_EID_VHT_OPERATION = 192, + WLAN_EID_OPMODE_NOTIF = 199, /* 802.11ad */ WLAN_EID_NON_TX_BSSID_CAP = 83, @@ -1652,6 +1681,7 @@ enum ieee80211_category { WLAN_CATEGORY_WMM = 17, WLAN_CATEGORY_FST = 18, WLAN_CATEGORY_UNPROT_DMG = 20, + WLAN_CATEGORY_VHT = 21, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -1677,6 +1707,13 @@ enum ieee80211_ht_actioncode { WLAN_HT_ACTION_ASEL_IDX_FEEDBACK = 7, }; +/* VHT action codes */ +enum ieee80211_vht_actioncode { + WLAN_VHT_ACTION_COMPRESSED_BF = 0, + WLAN_VHT_ACTION_GROUPID_MGMT = 1, + WLAN_VHT_ACTION_OPMODE_NOTIF = 2, +}; + /* Self Protected Action codes */ enum ieee80211_self_protected_actioncode { WLAN_SP_RESERVED = 0, -- cgit v0.10.2 From 8921d04e8df7475d733d853564bdb001e83bf33f Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:26:42 +0100 Subject: mac80211: track number of spatial streams With VHT, a station can change the number of spatial streams it can receive on the fly, not unlike spatial multiplexing in HT. Prepare for that by tracking the maximum number of spatial streams it can receive when the connection is established. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 1e3b4f7..a608ab98 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1237,6 +1237,10 @@ enum ieee80211_sta_rx_bandwidth { * if wme is supported. * @max_sp: max Service Period. Only valid if wme is supported. * @bandwidth: current bandwidth the station can receive with + * @rx_nss: in HT/VHT, the maximum number of spatial streams the + * station can receive at the moment, changed by operating mode + * notifications and capabilities. The value is only valid after + * the station moves to associated state. */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1247,6 +1251,7 @@ struct ieee80211_sta { bool wme; u8 uapsd_queues; u8 max_sp; + u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; /* must be last */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6b41d77..3b13af4 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1432,6 +1432,7 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_vht_cap *vht_cap_ie, struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); +void ieee80211_sta_set_rx_nss(struct sta_info *sta); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/rate.h b/net/mac80211/rate.h index 301386d..d35a5dd 100644 --- a/net/mac80211/rate.h +++ b/net/mac80211/rate.h @@ -68,6 +68,8 @@ static inline void rate_control_rate_init(struct sta_info *sta) sband = local->hw.wiphy->bands[chanctx_conf->def.chan->band]; rcu_read_unlock(); + ieee80211_sta_set_rx_nss(sta); + ref->ops->rate_init(ref->priv, sband, ista, priv_sta); set_sta_flag(sta, WLAN_STA_RATE_CONTROL); } diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 0fc9a2f..67436e3 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -74,3 +74,44 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) return IEEE80211_STA_RX_BW_80; } } + +void ieee80211_sta_set_rx_nss(struct sta_info *sta) +{ + u8 ht_rx_nss = 0, vht_rx_nss = 0; + + /* if we received a notification already don't overwrite it */ + if (sta->sta.rx_nss) + return; + + if (sta->sta.ht_cap.ht_supported) { + if (sta->sta.ht_cap.mcs.rx_mask[0]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[1]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[2]) + ht_rx_nss++; + if (sta->sta.ht_cap.mcs.rx_mask[3]) + ht_rx_nss++; + /* FIXME: consider rx_highest? */ + } + + if (sta->sta.vht_cap.vht_supported) { + int i; + u16 rx_mcs_map; + + rx_mcs_map = le16_to_cpu(sta->sta.vht_cap.vht_mcs.rx_mcs_map); + + for (i = 7; i >= 0; i--) { + u8 mcs = (rx_mcs_map >> (2 * i)) & 3; + + if (mcs != IEEE80211_VHT_MCS_NOT_SUPPORTED) { + vht_rx_nss = i + 1; + break; + } + } + /* FIXME: consider rx_highest? */ + } + + ht_rx_nss = max(ht_rx_nss, vht_rx_nss); + sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss); +} -- cgit v0.10.2 From 0af83d3df5863224336a18c24a14fda542b712f5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 27 Dec 2012 18:55:36 +0100 Subject: mac80211: handle VHT operating mode notification Handle the operating mode notification action frame. When the supported streams or the bandwidth change let the driver and rate control algorithm know. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 67c1a6c..12b5996 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1301,6 +1301,7 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454 0x00000002 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C #define IEEE80211_VHT_CAP_RXLDPC 0x00000010 #define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 #define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 diff --git a/include/net/mac80211.h b/include/net/mac80211.h index a608ab98..b7fb311 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -2118,11 +2118,14 @@ enum ieee80211_frame_release_type { * @IEEE80211_RC_SUPP_RATES_CHANGED: The supported rate set of this peer * changed (in IBSS mode) due to discovering more information about * the peer. + * @IEEE80211_RC_NSS_CHANGED: N_SS (number of spatial streams) was changed + * by the peer */ enum ieee80211_rate_control_changed { IEEE80211_RC_BW_CHANGED = BIT(0), IEEE80211_RC_SMPS_CHANGED = BIT(1), IEEE80211_RC_SUPP_RATES_CHANGED = BIT(2), + IEEE80211_RC_NSS_CHANGED = BIT(3), }; /** diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index a64b4f0..797969b 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -212,6 +212,10 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, changed = true; sta->sta.bandwidth = bw; + sta->cur_max_bandwidth = + ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + return changed; } diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 3b13af4..4947c91 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1433,6 +1433,9 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); +void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, u8 opmode, + enum ieee80211_band band); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 8a861a5..1617e0b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2436,6 +2436,36 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) } break; + case WLAN_CATEGORY_VHT: + if (sdata->vif.type != NL80211_IFTYPE_STATION && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT && + sdata->vif.type != NL80211_IFTYPE_AP_VLAN && + sdata->vif.type != NL80211_IFTYPE_AP && + sdata->vif.type != NL80211_IFTYPE_ADHOC) + break; + + /* verify action code is present */ + if (len < IEEE80211_MIN_ACTION_SIZE + 1) + goto invalid; + + switch (mgmt->u.action.u.vht_opmode_notif.action_code) { + case WLAN_VHT_ACTION_OPMODE_NOTIF: { + u8 opmode; + + /* verify opmode is present */ + if (len < IEEE80211_MIN_ACTION_SIZE + 2) + goto invalid; + + opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; + + ieee80211_vht_handle_opmode(rx->sdata, rx->sta, + opmode, status->band); + goto handled; + } + default: + break; + } + break; case WLAN_CATEGORY_BACK: if (sdata->vif.type != NL80211_IFTYPE_STATION && sdata->vif.type != NL80211_IFTYPE_MESH_POINT && diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index 03c42f8..63dfdb5 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -297,6 +297,8 @@ struct sta_ampdu_mlme { * @sta_state: duplicates information about station state (for debug) * @beacon_loss_count: number of times beacon loss has triggered * @rcu_head: RCU head used for freeing this station struct + * @cur_max_bandwidth: maximum bandwidth to use for TX to the station, + * taken from HT/VHT capabilities or VHT operating mode notification */ struct sta_info { /* General information, mostly static */ @@ -398,6 +400,8 @@ struct sta_info { } debugfs; #endif + enum ieee80211_sta_rx_bandwidth cur_max_bandwidth; + unsigned int lost_packets; unsigned int beacon_loss_count; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 67436e3..0951f74 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -10,6 +10,7 @@ #include #include #include "ieee80211_i.h" +#include "rate.h" void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, @@ -39,6 +40,15 @@ void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, memcpy(&vht_cap->vht_mcs, &vht_cap_ie->supp_mcs, sizeof(struct ieee80211_vht_mcs_info)); + switch (vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) { + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ: + case IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; + break; + default: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; + } + sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); } @@ -46,12 +56,13 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) { struct ieee80211_sub_if_data *sdata = sta->sdata; u32 cap = sta->sta.vht_cap.cap; + enum ieee80211_sta_rx_bandwidth bw; - if (!sta->sta.vht_cap.vht_supported) - return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + if (!sta->sta.vht_cap.vht_supported) { + bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; - - /* TODO: handle VHT opmode notification data */ + goto check_max; + } switch (sdata->vif.bss_conf.chandef.width) { default: @@ -60,19 +71,31 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta) case NL80211_CHAN_WIDTH_20_NOHT: case NL80211_CHAN_WIDTH_20: case NL80211_CHAN_WIDTH_40: - return sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? + bw = sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + break; case NL80211_CHAN_WIDTH_160: - if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) - return IEEE80211_STA_RX_BW_160; + if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ) { + bw = IEEE80211_STA_RX_BW_160; + break; + } /* fall through */ case NL80211_CHAN_WIDTH_80P80: - if (cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) - return IEEE80211_STA_RX_BW_160; + if ((cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK) == + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ) { + bw = IEEE80211_STA_RX_BW_160; + break; + } /* fall through */ case NL80211_CHAN_WIDTH_80: - return IEEE80211_STA_RX_BW_80; + bw = IEEE80211_STA_RX_BW_80; } + + check_max: + if (bw > sta->cur_max_bandwidth) + bw = sta->cur_max_bandwidth; + return bw; } void ieee80211_sta_set_rx_nss(struct sta_info *sta) @@ -115,3 +138,53 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta) ht_rx_nss = max(ht_rx_nss, vht_rx_nss); sta->sta.rx_nss = max_t(u8, 1, ht_rx_nss); } + +void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, u8 opmode, + enum ieee80211_band band) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_supported_band *sband; + enum ieee80211_sta_rx_bandwidth new_bw; + u32 changed = 0; + u8 nss; + + sband = local->hw.wiphy->bands[band]; + + /* ignore - no support for BF yet */ + if (opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF) + return; + + nss = opmode & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; + nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; + nss += 1; + + if (sta->sta.rx_nss != nss) { + sta->sta.rx_nss = nss; + changed |= IEEE80211_RC_NSS_CHANGED; + } + + switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_40; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_80; + break; + case IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: + sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_160; + break; + } + + new_bw = ieee80211_sta_cur_vht_bw(sta); + if (new_bw != sta->sta.bandwidth) { + sta->sta.bandwidth = new_bw; + changed |= IEEE80211_RC_NSS_CHANGED; + } + + if (changed) + rate_control_rate_update(local, sband, sta, changed); +} -- cgit v0.10.2 From 1128958dc22cbfa2562082da2621a06ba71bdce2 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 17:36:12 +0100 Subject: mac80211: init HT TX data before rate control In case of connection, the station data is initialised from the beacon/probe response first and then updated from the association response. If the latter is different we update the rate control algorithm and driver. Instead of doing it this way, set the station data properly with data from the association response before initializing rate control. Also simplify the code by passing the station pointer. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index be11472..b97b615 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -175,6 +175,7 @@ static int ecw2cw(int ecw) } static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, struct ieee80211_ht_operation *ht_oper, const u8 *bssid, bool reconfig) { @@ -182,11 +183,13 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; - struct sta_info *sta; u32 changed = 0; u16 ht_opmode; bool disable_40 = false; + if (WARN_ON_ONCE(!sta)) + return 0; + rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (WARN_ON(!chanctx_conf)) { @@ -216,28 +219,19 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) disable_40 = true; - mutex_lock(&local->sta_mtx); - sta = sta_info_get(sdata, bssid); - - if (WARN_ON_ONCE(!sta)) { - mutex_unlock(&local->sta_mtx); - return changed; - } - if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) disable_40 = true; - if (!reconfig || - disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { + if (disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { if (disable_40) sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; else sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); - rate_control_rate_update(local, sband, sta, - IEEE80211_RC_BW_CHANGED); + if (reconfig) + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); } - mutex_unlock(&local->sta_mtx); ht_opmode = le16_to_cpu(ht_oper->operation_mode); @@ -2217,6 +2211,12 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, elems.vht_cap_elem, sta); + if (elems.ht_operation && elems.wmm_param && + !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) + changed |= ieee80211_config_ht_tx(sdata, sta, + elems.ht_operation, + cbss->bssid, false); + rate_control_rate_init(sta); if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) @@ -2254,11 +2254,6 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_set_wmm_default(sdata, false); changed |= BSS_CHANGED_QOS; - if (elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, - cbss->bssid, false); - /* set AID and assoc capability, * ieee80211_set_associated() will tell the driver */ bss_conf->aid = aid; @@ -2734,10 +2729,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, erp_valid, erp_value); + mutex_lock(&local->sta_mtx); if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, elems.ht_operation, + changed |= ieee80211_config_ht_tx(sdata, + sta_info_get(sdata, bssid), + elems.ht_operation, bssid, true); + mutex_unlock(&local->sta_mtx); if (elems.country_elem && elems.pwr_constr_elem && mgmt->u.probe_resp.capab_info & -- cgit v0.10.2 From cb145022c82bde532b386c7a6f1dcef1b2bca2e5 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 20:41:50 +0100 Subject: mac80211: fix HT/VHT disable flags The code to disable HT and VHT if VHT was advertised without VHT is wrong -- it accidentally uses the wrong flags. Fix that. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index b97b615..e6da6bf 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3588,8 +3588,8 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, vht_oper = NULL; sdata_info(sdata, "AP advertised VHT without HT, disabling both\n"); - sdata->flags |= IEEE80211_STA_DISABLE_HT; - sdata->flags |= IEEE80211_STA_DISABLE_VHT; + ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; } } -- cgit v0.10.2 From 18942d3be0e0e67aa40550ce3266e48b51845d52 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 21:30:37 +0100 Subject: mac80211: fix ieee80211_change_chandef name This should be called ieee80211_change_chanctx() since it changes the channel context, not a chandef. Signed-off-by: Johannes Berg diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index d91ccfc..78dbb37 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -9,7 +9,7 @@ #include "ieee80211_i.h" #include "driver-ops.h" -static void ieee80211_change_chandef(struct ieee80211_local *local, +static void ieee80211_change_chanctx(struct ieee80211_local *local, struct ieee80211_chanctx *ctx, const struct cfg80211_chan_def *chandef) { @@ -49,7 +49,7 @@ ieee80211_find_chanctx(struct ieee80211_local *local, if (!compat) continue; - ieee80211_change_chandef(local, ctx, compat); + ieee80211_change_chanctx(local, ctx, compat); return ctx; } @@ -175,7 +175,7 @@ static void ieee80211_recalc_chanctx_chantype(struct ieee80211_local *local, if (WARN_ON_ONCE(!compat)) return; - ieee80211_change_chandef(local, ctx, compat); + ieee80211_change_chanctx(local, ctx, compat); } static void ieee80211_unassign_vif_chanctx(struct ieee80211_sub_if_data *sdata, -- cgit v0.10.2 From bee7f58699a406a4210ba9e0367bae7ac666abd0 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 22:24:55 +0100 Subject: mac80211: handle operating mode notif in beacon/assoc response In beacons and association response frames an AP may include an operating mode notification element to advertise changes in the number of spatial streams it can receive. Handle this using the existing function that handles the action frame, but only handle NSS changes, not bandwidth changes which aren't allowed here. Signed-off-by: Johannes Berg diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 4947c91..892bac6 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1197,6 +1197,7 @@ struct ieee802_11_elems { u8 *pwr_constr_elem; u8 *quiet_elem; /* first quite element */ u8 *timeout_int; + u8 *opmode_notif; /* length of them, respectively */ u8 ssid_len; @@ -1435,7 +1436,7 @@ enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band); + enum ieee80211_band band, bool nss_only); /* Spectrum management */ void ieee80211_process_measurement_req(struct ieee80211_sub_if_data *sdata, diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index e6da6bf..f2c6f77 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -2217,6 +2217,21 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, elems.ht_operation, cbss->bssid, false); + /* + * If an operating mode notification IE is present, override the + * NSS calculation (that would be done in rate_control_rate_init()) + * and use the # of streams from that element. + */ + if (elems.opmode_notif && + !(*elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF)) { + u8 nss; + + nss = *elems.opmode_notif & IEEE80211_OPMODE_NOTIF_RX_NSS_MASK; + nss >>= IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT; + nss += 1; + sta->sta.rx_nss = nss; + } + rate_control_rate_init(sta); if (ifmgd->flags & IEEE80211_STA_MFP_ENABLED) @@ -2489,6 +2504,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, struct ieee80211_local *local = sdata->local; struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; + struct sta_info *sta; u32 changed = 0; bool erp_valid; u8 erp_value = 0; @@ -2728,14 +2744,18 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, le16_to_cpu(mgmt->u.beacon.capab_info), erp_valid, erp_value); - mutex_lock(&local->sta_mtx); + sta = sta_info_get(sdata, bssid); + if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, - sta_info_get(sdata, bssid), + changed |= ieee80211_config_ht_tx(sdata, sta, elems.ht_operation, bssid, true); + + if (sta && elems.opmode_notif) + ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, + rx_status->band, true); mutex_unlock(&local->sta_mtx); if (elems.country_elem && elems.pwr_constr_elem && diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 1617e0b..30f1ba6 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2459,7 +2459,8 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) opmode = mgmt->u.action.u.vht_opmode_notif.operating_mode; ieee80211_vht_handle_opmode(rx->sdata, rx->sta, - opmode, status->band); + opmode, status->band, + false); goto handled; } default: diff --git a/net/mac80211/util.c b/net/mac80211/util.c index b231bc2..e24ff38 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -787,6 +787,12 @@ u32 ieee802_11_parse_elems_crc(u8 *start, size_t len, else elem_parse_failed = true; break; + case WLAN_EID_OPMODE_NOTIF: + if (elen > 0) + elems->opmode_notif = pos; + else + elem_parse_failed = true; + break; case WLAN_EID_MESH_ID: elems->mesh_id = pos; elems->mesh_id_len = elen; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index 0951f74..a9549fc 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -141,7 +141,7 @@ void ieee80211_sta_set_rx_nss(struct sta_info *sta) void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, u8 opmode, - enum ieee80211_band band) + enum ieee80211_band band, bool nss_only) { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; @@ -164,6 +164,9 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, changed |= IEEE80211_RC_NSS_CHANGED; } + if (nss_only) + goto change; + switch (opmode & IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK) { case IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ: sta->cur_max_bandwidth = IEEE80211_STA_RX_BW_20; @@ -185,6 +188,7 @@ void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, changed |= IEEE80211_RC_NSS_CHANGED; } + change: if (changed) rate_control_rate_update(local, sband, sta, changed); } -- cgit v0.10.2 From 08e6effa1187cc5f401a1cc286ce84f0a581b35a Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 23:33:32 +0100 Subject: mac80211: disable HT/VHT if AP has no HT/VHT capability Having HT/VHT operation IEs but not capability IEs leads to a strange situation where we configure the channel to an HT or VHT bandwidth and then can't actually use it. Prevent this by checking that the HT and VHT capability IEs are present as well as the operation IEs; if not, disable HT and/or VHT. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index f2c6f77..03f2788 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -3589,16 +3589,22 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && sband->ht_cap.ht_supported) { - const u8 *ht_oper_ie; + const u8 *ht_oper_ie, *ht_cap; ht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_OPERATION); if (ht_oper_ie && ht_oper_ie[1] >= sizeof(*ht_oper)) ht_oper = (void *)(ht_oper_ie + 2); + + ht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_HT_CAPABILITY); + if (!ht_cap || ht_cap[1] < sizeof(struct ieee80211_ht_cap)) { + ifmgd->flags |= IEEE80211_STA_DISABLE_HT; + ht_oper = NULL; + } } if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && sband->vht_cap.vht_supported) { - const u8 *vht_oper_ie; + const u8 *vht_oper_ie, *vht_cap; vht_oper_ie = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_OPERATION); @@ -3611,6 +3617,12 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= IEEE80211_STA_DISABLE_HT; ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; } + + vht_cap = ieee80211_bss_get_ie(cbss, WLAN_EID_VHT_CAPABILITY); + if (!vht_cap || vht_cap[1] < sizeof(struct ieee80211_vht_cap)) { + ifmgd->flags |= IEEE80211_STA_DISABLE_VHT; + vht_oper = NULL; + } } ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, -- cgit v0.10.2 From f2d9330ee820b01e2b1caf46370bc7963d259908 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 13:15:55 +0100 Subject: mac80211: clean up channel use in ieee80211_config_ht_tx The channel use is confusing, some uses the channel context and some the bss_conf.chandef. The latter is fine, so get rid of the channel context part. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 03f2788..8fdf1e1 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -181,7 +181,6 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, { struct ieee80211_local *local = sdata->local; struct ieee80211_supported_band *sband; - struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_channel *chan; u32 changed = 0; u16 ht_opmode; @@ -190,23 +189,16 @@ static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, if (WARN_ON_ONCE(!sta)) return 0; - rcu_read_lock(); - chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); - if (WARN_ON(!chanctx_conf)) { - rcu_read_unlock(); - return 0; - } - chan = chanctx_conf->def.chan; - rcu_read_unlock(); + chan = sdata->vif.bss_conf.chandef.chan; sband = local->hw.wiphy->bands[chan->band]; switch (sdata->vif.bss_conf.chandef.width) { case NL80211_CHAN_WIDTH_40: - if (sdata->vif.bss_conf.chandef.chan->center_freq > + if (chan->center_freq > sdata->vif.bss_conf.chandef.center_freq1 && chan->flags & IEEE80211_CHAN_NO_HT40MINUS) disable_40 = true; - if (sdata->vif.bss_conf.chandef.chan->center_freq < + if (chan->center_freq < sdata->vif.bss_conf.chandef.center_freq1 && chan->flags & IEEE80211_CHAN_NO_HT40PLUS) disable_40 = true; -- cgit v0.10.2 From 2c9b735982ee8a2d34e7eeb3e26b683f81872fdb Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 7 Feb 2013 21:37:29 +0100 Subject: mac80211: add ieee80211_vif_change_bandwidth For HT and VHT the current bandwidth can change, add the function ieee80211_vif_change_bandwidth() to take care of this. It returns a failure if the new bandwidth isn't compatible with the existing channel context, the caller has to handle that. When it happens, also inform the driver that the bandwidth changed for this virtual interface (no drivers would actually care today though.) Changing to/from HT/VHT isn't allowed though. Signed-off-by: Johannes Berg diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b7fb311..54e2add 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -215,6 +215,9 @@ struct ieee80211_chanctx_conf { * changed (currently only in P2P client mode, GO mode will be later) * @BSS_CHANGED_DTIM_PERIOD: the DTIM period value was changed (set when * it becomes valid, managed mode only) + * @BSS_CHANGED_BANDWIDTH: The bandwidth used by this interface changed, + * note that this is only called when it changes after the channel + * context had been assigned. */ enum ieee80211_bss_change { BSS_CHANGED_ASSOC = 1<<0, @@ -238,6 +241,7 @@ enum ieee80211_bss_change { BSS_CHANGED_TXPOWER = 1<<18, BSS_CHANGED_P2P_PS = 1<<19, BSS_CHANGED_DTIM_PERIOD = 1<<20, + BSS_CHANGED_BANDWIDTH = 1<<21, /* when adding here, make sure to change ieee80211_reconfig */ }; diff --git a/net/mac80211/chan.c b/net/mac80211/chan.c index 78dbb37..78c0d90 100644 --- a/net/mac80211/chan.c +++ b/net/mac80211/chan.c @@ -375,6 +375,55 @@ int ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, return ret; } +int ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_chanctx_conf *conf; + struct ieee80211_chanctx *ctx; + int ret; + + if (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) + return -EINVAL; + + mutex_lock(&local->chanctx_mtx); + if (cfg80211_chandef_identical(chandef, &sdata->vif.bss_conf.chandef)) { + ret = 0; + goto out; + } + + if (chandef->width == NL80211_CHAN_WIDTH_20_NOHT || + sdata->vif.bss_conf.chandef.width == NL80211_CHAN_WIDTH_20_NOHT) { + ret = -EINVAL; + goto out; + } + + conf = rcu_dereference_protected(sdata->vif.chanctx_conf, + lockdep_is_held(&local->chanctx_mtx)); + if (!conf) { + ret = -EINVAL; + goto out; + } + + ctx = container_of(conf, struct ieee80211_chanctx, conf); + if (!cfg80211_chandef_compatible(&conf->def, chandef)) { + ret = -EINVAL; + goto out; + } + + sdata->vif.bss_conf.chandef = *chandef; + + ieee80211_recalc_chanctx_chantype(local, ctx); + + *changed |= BSS_CHANGED_BANDWIDTH; + ret = 0; + out: + mutex_unlock(&local->chanctx_mtx); + return ret; +} + void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata) { WARN_ON(sdata->dev && netif_carrier_ok(sdata->dev)); diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 892bac6..d107444 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1613,6 +1613,10 @@ int __must_check ieee80211_vif_use_channel(struct ieee80211_sub_if_data *sdata, const struct cfg80211_chan_def *chandef, enum ieee80211_chanctx_mode mode); +int __must_check +ieee80211_vif_change_bandwidth(struct ieee80211_sub_if_data *sdata, + const struct cfg80211_chan_def *chandef, + u32 *changed); void ieee80211_vif_release_channel(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_vlan_copy_chanctx(struct ieee80211_sub_if_data *sdata); void ieee80211_vif_copy_chanctx_to_vlans(struct ieee80211_sub_if_data *sdata, -- cgit v0.10.2 From 6565ec9b58483a9706fbe888364aeceb359aeced Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 14:52:32 +0100 Subject: mac80211: move ieee80211_determine_chantype function The next patch will need it further up in the file, so move it unchanged now. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 8fdf1e1..50423c6 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -174,6 +174,201 @@ static int ecw2cw(int ecw) return (1 << ecw) - 1; } +static u32 chandef_downgrade(struct cfg80211_chan_def *c) +{ + u32 ret; + int tmp; + + switch (c->width) { + case NL80211_CHAN_WIDTH_20: + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_40: + c->width = NL80211_CHAN_WIDTH_20; + c->center_freq1 = c->chan->center_freq; + ret = IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80: + tmp = (30 + c->chan->center_freq - c->center_freq1)/20; + /* n_P40 */ + tmp /= 2; + /* freq_P40 */ + c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; + c->width = NL80211_CHAN_WIDTH_40; + ret = IEEE80211_STA_DISABLE_VHT; + break; + case NL80211_CHAN_WIDTH_80P80: + c->center_freq2 = 0; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + case NL80211_CHAN_WIDTH_160: + /* n_P20 */ + tmp = (70 + c->chan->center_freq - c->center_freq1)/20; + /* n_P80 */ + tmp /= 4; + c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; + c->width = NL80211_CHAN_WIDTH_80; + ret = IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ; + break; + default: + case NL80211_CHAN_WIDTH_20_NOHT: + WARN_ON_ONCE(1); + c->width = NL80211_CHAN_WIDTH_20_NOHT; + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + break; + } + + WARN_ON_ONCE(!cfg80211_chandef_valid(c)); + + return ret; +} + +static u32 +ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + struct ieee80211_channel *channel, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + struct cfg80211_chan_def *chandef) +{ + struct cfg80211_chan_def vht_chandef; + u32 ht_cfreq, ret; + + chandef->chan = channel; + chandef->width = NL80211_CHAN_WIDTH_20_NOHT; + chandef->center_freq1 = channel->center_freq; + chandef->center_freq2 = 0; + + if (!ht_oper || !sband->ht_cap.ht_supported) { + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + chandef->width = NL80211_CHAN_WIDTH_20; + + ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, + channel->band); + /* check that channel matches the right operating channel */ + if (channel->center_freq != ht_cfreq) { + /* + * It's possible that some APs are confused here; + * Netgear WNDR3700 sometimes reports 4 higher than + * the actual channel in association responses, but + * since we look at probe response/beacon data here + * it should be OK. + */ + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); + ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; + goto out; + } + + /* check 40 MHz support, if we have it */ + if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { + switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 += 10; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + chandef->width = NL80211_CHAN_WIDTH_40; + chandef->center_freq1 -= 10; + break; + } + } else { + /* 40 MHz (and 80 MHz) must be supported for VHT */ + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!vht_oper || !sband->vht_cap.vht_supported) { + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + vht_chandef.chan = channel; + vht_chandef.center_freq1 = + ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, + channel->band); + vht_chandef.center_freq2 = 0; + + if (vht_oper->center_freq_seg2_idx) + vht_chandef.center_freq2 = + ieee80211_channel_to_frequency( + vht_oper->center_freq_seg2_idx, + channel->band); + + switch (vht_oper->chan_width) { + case IEEE80211_VHT_CHANWIDTH_USE_HT: + vht_chandef.width = chandef->width; + break; + case IEEE80211_VHT_CHANWIDTH_80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80; + break; + case IEEE80211_VHT_CHANWIDTH_160MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_160; + break; + case IEEE80211_VHT_CHANWIDTH_80P80MHZ: + vht_chandef.width = NL80211_CHAN_WIDTH_80P80; + break; + default: + sdata_info(sdata, + "AP VHT operation IE has invalid channel width (%d), disable VHT\n", + vht_oper->chan_width); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (!cfg80211_chandef_valid(&vht_chandef)) { + sdata_info(sdata, + "AP VHT information is invalid, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + if (cfg80211_chandef_identical(chandef, &vht_chandef)) { + ret = 0; + goto out; + } + + if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { + sdata_info(sdata, + "AP VHT information doesn't match HT, disable VHT\n"); + ret = IEEE80211_STA_DISABLE_VHT; + goto out; + } + + *chandef = vht_chandef; + + ret = 0; + +out: + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, + IEEE80211_CHAN_DISABLED)) { + if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { + ret = IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_VHT; + goto out; + } + + ret |= chandef_downgrade(chandef); + } + + if (chandef->width != vht_chandef.width) + sdata_info(sdata, + "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); + + WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); + return ret; +} + static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, struct sta_info *sta, struct ieee80211_ht_operation *ht_oper, @@ -3321,201 +3516,6 @@ int ieee80211_max_network_latency(struct notifier_block *nb, return 0; } -static u32 chandef_downgrade(struct cfg80211_chan_def *c) -{ - u32 ret; - int tmp; - - switch (c->width) { - case NL80211_CHAN_WIDTH_20: - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_40: - c->width = NL80211_CHAN_WIDTH_20; - c->center_freq1 = c->chan->center_freq; - ret = IEEE80211_STA_DISABLE_40MHZ | - IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80: - tmp = (30 + c->chan->center_freq - c->center_freq1)/20; - /* n_P40 */ - tmp /= 2; - /* freq_P40 */ - c->center_freq1 = c->center_freq1 - 20 + 40 * tmp; - c->width = NL80211_CHAN_WIDTH_40; - ret = IEEE80211_STA_DISABLE_VHT; - break; - case NL80211_CHAN_WIDTH_80P80: - c->center_freq2 = 0; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - case NL80211_CHAN_WIDTH_160: - /* n_P20 */ - tmp = (70 + c->chan->center_freq - c->center_freq1)/20; - /* n_P80 */ - tmp /= 4; - c->center_freq1 = c->center_freq1 - 40 + 80 * tmp; - c->width = NL80211_CHAN_WIDTH_80; - ret = IEEE80211_STA_DISABLE_80P80MHZ | - IEEE80211_STA_DISABLE_160MHZ; - break; - default: - case NL80211_CHAN_WIDTH_20_NOHT: - WARN_ON_ONCE(1); - c->width = NL80211_CHAN_WIDTH_20_NOHT; - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - break; - } - - WARN_ON_ONCE(!cfg80211_chandef_valid(c)); - - return ret; -} - -static u32 -ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_channel *channel, - const struct ieee80211_ht_operation *ht_oper, - const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef) -{ - struct cfg80211_chan_def vht_chandef; - u32 ht_cfreq, ret; - - chandef->chan = channel; - chandef->width = NL80211_CHAN_WIDTH_20_NOHT; - chandef->center_freq1 = channel->center_freq; - chandef->center_freq2 = 0; - - if (!ht_oper || !sband->ht_cap.ht_supported) { - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - chandef->width = NL80211_CHAN_WIDTH_20; - - ht_cfreq = ieee80211_channel_to_frequency(ht_oper->primary_chan, - channel->band); - /* check that channel matches the right operating channel */ - if (channel->center_freq != ht_cfreq) { - /* - * It's possible that some APs are confused here; - * Netgear WNDR3700 sometimes reports 4 higher than - * the actual channel in association responses, but - * since we look at probe response/beacon data here - * it should be OK. - */ - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); - ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; - goto out; - } - - /* check 40 MHz support, if we have it */ - if (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) { - switch (ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { - case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 += 10; - break; - case IEEE80211_HT_PARAM_CHA_SEC_BELOW: - chandef->width = NL80211_CHAN_WIDTH_40; - chandef->center_freq1 -= 10; - break; - } - } else { - /* 40 MHz (and 80 MHz) must be supported for VHT */ - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!vht_oper || !sband->vht_cap.vht_supported) { - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - vht_chandef.chan = channel; - vht_chandef.center_freq1 = - ieee80211_channel_to_frequency(vht_oper->center_freq_seg1_idx, - channel->band); - vht_chandef.center_freq2 = 0; - - if (vht_oper->center_freq_seg2_idx) - vht_chandef.center_freq2 = - ieee80211_channel_to_frequency( - vht_oper->center_freq_seg2_idx, - channel->band); - - switch (vht_oper->chan_width) { - case IEEE80211_VHT_CHANWIDTH_USE_HT: - vht_chandef.width = chandef->width; - break; - case IEEE80211_VHT_CHANWIDTH_80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80; - break; - case IEEE80211_VHT_CHANWIDTH_160MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_160; - break; - case IEEE80211_VHT_CHANWIDTH_80P80MHZ: - vht_chandef.width = NL80211_CHAN_WIDTH_80P80; - break; - default: - sdata_info(sdata, - "AP VHT operation IE has invalid channel width (%d), disable VHT\n", - vht_oper->chan_width); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (!cfg80211_chandef_valid(&vht_chandef)) { - sdata_info(sdata, - "AP VHT information is invalid, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - if (cfg80211_chandef_identical(chandef, &vht_chandef)) { - ret = 0; - goto out; - } - - if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - sdata_info(sdata, - "AP VHT information doesn't match HT, disable VHT\n"); - ret = IEEE80211_STA_DISABLE_VHT; - goto out; - } - - *chandef = vht_chandef; - - ret = 0; - -out: - while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, - IEEE80211_CHAN_DISABLED)) { - if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { - ret = IEEE80211_STA_DISABLE_HT | - IEEE80211_STA_DISABLE_VHT; - goto out; - } - - ret |= chandef_downgrade(chandef); - } - - if (chandef->width != vht_chandef.width) - sdata_info(sdata, - "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); - - WARN_ON_ONCE(!cfg80211_chandef_valid(chandef)); - return ret; -} - static u8 ieee80211_ht_vht_rx_chains(struct ieee80211_sub_if_data *sdata, struct cfg80211_bss *cbss) { -- cgit v0.10.2 From 30eb1dc2c43039e0fe278e6f3a288de9f216d70d Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 8 Feb 2013 15:12:14 +0100 Subject: mac80211: properly track HT/VHT operation changes A while ago, I made the mac80211 station code never change the channel type after association. This solved a number of issues but is ultimately wrong, we should react if the AP changes the HT operation IE and switches bandwidth. One of the issues is that we associate as HT40 capable, but if the AP ever switches to 40 MHz we won't be able to receive such frames because we never set our channel to 40 MHz. This addresses this and VHT operation changes. If there's a change that is incompatible with our setup, e.g. if the AP decides to change the channel entirely (and for some reason we still hear the beacon) we'll just disconnect. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 50423c6..05b229e 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -114,6 +114,9 @@ enum rx_mgmt_action { /* caller must call cfg80211_send_assoc_timeout() */ RX_MGMT_CFG80211_ASSOC_TIMEOUT, + + /* used when a processed beacon causes a deauth */ + RX_MGMT_CFG80211_TX_DEAUTH, }; /* utils */ @@ -234,7 +237,7 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, struct ieee80211_channel *channel, const struct ieee80211_ht_operation *ht_oper, const struct ieee80211_vht_operation *vht_oper, - struct cfg80211_chan_def *chandef) + struct cfg80211_chan_def *chandef, bool verbose) { struct cfg80211_chan_def vht_chandef; u32 ht_cfreq, ret; @@ -262,10 +265,11 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, * since we look at probe response/beacon data here * it should be OK. */ - sdata_info(sdata, - "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", - channel->center_freq, ht_cfreq, - ht_oper->primary_chan, channel->band); + if (verbose) + sdata_info(sdata, + "Wrong control channel: center-freq: %d ht-cfreq: %d ht->primary_chan: %d band: %d - Disabling HT\n", + channel->center_freq, ht_cfreq, + ht_oper->primary_chan, channel->band); ret = IEEE80211_STA_DISABLE_HT | IEEE80211_STA_DISABLE_VHT; goto out; } @@ -319,16 +323,18 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, vht_chandef.width = NL80211_CHAN_WIDTH_80P80; break; default: - sdata_info(sdata, - "AP VHT operation IE has invalid channel width (%d), disable VHT\n", - vht_oper->chan_width); + if (verbose) + sdata_info(sdata, + "AP VHT operation IE has invalid channel width (%d), disable VHT\n", + vht_oper->chan_width); ret = IEEE80211_STA_DISABLE_VHT; goto out; } if (!cfg80211_chandef_valid(&vht_chandef)) { - sdata_info(sdata, - "AP VHT information is invalid, disable VHT\n"); + if (verbose) + sdata_info(sdata, + "AP VHT information is invalid, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } @@ -339,8 +345,9 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, } if (!cfg80211_chandef_compatible(chandef, &vht_chandef)) { - sdata_info(sdata, - "AP VHT information doesn't match HT, disable VHT\n"); + if (verbose) + sdata_info(sdata, + "AP VHT information doesn't match HT, disable VHT\n"); ret = IEEE80211_STA_DISABLE_VHT; goto out; } @@ -361,7 +368,7 @@ out: ret |= chandef_downgrade(chandef); } - if (chandef->width != vht_chandef.width) + if (chandef->width != vht_chandef.width && verbose) sdata_info(sdata, "capabilities/regulatory prevented using AP HT/VHT configuration, downgraded\n"); @@ -369,66 +376,128 @@ out: return ret; } -static u32 ieee80211_config_ht_tx(struct ieee80211_sub_if_data *sdata, - struct sta_info *sta, - struct ieee80211_ht_operation *ht_oper, - const u8 *bssid, bool reconfig) +static int ieee80211_config_bw(struct ieee80211_sub_if_data *sdata, + struct sta_info *sta, + const struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_vht_operation *vht_oper, + const u8 *bssid, u32 *changed) { struct ieee80211_local *local = sdata->local; + struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_supported_band *sband; struct ieee80211_channel *chan; - u32 changed = 0; + struct cfg80211_chan_def chandef; u16 ht_opmode; - bool disable_40 = false; + u32 flags; + enum ieee80211_sta_rx_bandwidth new_sta_bw; + int ret; - if (WARN_ON_ONCE(!sta)) + /* if HT was/is disabled, don't track any bandwidth changes */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_HT || !ht_oper) return 0; + /* don't check VHT if we associated as non-VHT station */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_VHT) + vht_oper = NULL; + + if (WARN_ON_ONCE(!sta)) + return -EINVAL; + chan = sdata->vif.bss_conf.chandef.chan; sband = local->hw.wiphy->bands[chan->band]; - switch (sdata->vif.bss_conf.chandef.width) { + /* calculate new channel (type) based on HT/VHT operation IEs */ + flags = ieee80211_determine_chantype(sdata, sband, chan, ht_oper, + vht_oper, &chandef, false); + + /* + * Downgrade the new channel if we associated with restricted + * capabilities. For example, if we associated as a 20 MHz STA + * to a 40 MHz AP (due to regulatory, capabilities or config + * reasons) then switching to a 40 MHz channel now won't do us + * any good -- we couldn't use it with the AP. + */ + if (ifmgd->flags & IEEE80211_STA_DISABLE_80P80MHZ && + chandef.width == NL80211_CHAN_WIDTH_80P80) + flags |= chandef_downgrade(&chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_160MHZ && + chandef.width == NL80211_CHAN_WIDTH_160) + flags |= chandef_downgrade(&chandef); + if (ifmgd->flags & IEEE80211_STA_DISABLE_40MHZ && + chandef.width > NL80211_CHAN_WIDTH_20) + flags |= chandef_downgrade(&chandef); + + if (cfg80211_chandef_identical(&chandef, &sdata->vif.bss_conf.chandef)) + return 0; + + sdata_info(sdata, + "AP %pM changed bandwidth, new config is %d MHz, width %d (%d/%d MHz)\n", + ifmgd->bssid, chandef.chan->center_freq, chandef.width, + chandef.center_freq1, chandef.center_freq2); + + if (flags != (ifmgd->flags & (IEEE80211_STA_DISABLE_HT | + IEEE80211_STA_DISABLE_VHT | + IEEE80211_STA_DISABLE_40MHZ | + IEEE80211_STA_DISABLE_80P80MHZ | + IEEE80211_STA_DISABLE_160MHZ)) || + !cfg80211_chandef_valid(&chandef)) { + sdata_info(sdata, + "AP %pM changed bandwidth in a way we can't support - disconnect\n", + ifmgd->bssid); + return -EINVAL; + } + + switch (chandef.width) { + case NL80211_CHAN_WIDTH_20_NOHT: + case NL80211_CHAN_WIDTH_20: + new_sta_bw = IEEE80211_STA_RX_BW_20; + break; case NL80211_CHAN_WIDTH_40: - if (chan->center_freq > - sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40MINUS) - disable_40 = true; - if (chan->center_freq < - sdata->vif.bss_conf.chandef.center_freq1 && - chan->flags & IEEE80211_CHAN_NO_HT40PLUS) - disable_40 = true; + new_sta_bw = IEEE80211_STA_RX_BW_40; break; - default: + case NL80211_CHAN_WIDTH_80: + new_sta_bw = IEEE80211_STA_RX_BW_80; break; + case NL80211_CHAN_WIDTH_80P80: + case NL80211_CHAN_WIDTH_160: + new_sta_bw = IEEE80211_STA_RX_BW_160; + break; + default: + return -EINVAL; } - /* This can change during the lifetime of the BSS */ - if (!(ht_oper->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) - disable_40 = true; + if (new_sta_bw > sta->cur_max_bandwidth) + new_sta_bw = sta->cur_max_bandwidth; - if (!(sta->sta.ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40)) - disable_40 = true; + if (new_sta_bw < sta->sta.bandwidth) { + sta->sta.bandwidth = new_sta_bw; + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); + } - if (disable_40 != (sta->sta.bandwidth < IEEE80211_STA_RX_BW_40)) { - if (disable_40) - sta->sta.bandwidth = IEEE80211_STA_RX_BW_20; - else - sta->sta.bandwidth = ieee80211_sta_cur_vht_bw(sta); + ret = ieee80211_vif_change_bandwidth(sdata, &chandef, changed); + if (ret) { + sdata_info(sdata, + "AP %pM changed bandwidth to incompatible one - disconnect\n", + ifmgd->bssid); + return ret; + } - if (reconfig) - rate_control_rate_update(local, sband, sta, - IEEE80211_RC_BW_CHANGED); + if (new_sta_bw > sta->sta.bandwidth) { + sta->sta.bandwidth = new_sta_bw; + rate_control_rate_update(local, sband, sta, + IEEE80211_RC_BW_CHANGED); } ht_opmode = le16_to_cpu(ht_oper->operation_mode); /* if bss configuration changed store the new one */ - if (!reconfig || (sdata->vif.bss_conf.ht_operation_mode != ht_opmode)) { - changed |= BSS_CHANGED_HT; + if (sdata->vif.bss_conf.ht_operation_mode != ht_opmode) { + *changed |= BSS_CHANGED_HT; sdata->vif.bss_conf.ht_operation_mode = ht_opmode; } - return changed; + return 0; } /* frame sending functions */ @@ -2377,6 +2446,24 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ifmgd->aid = aid; + /* + * We previously checked these in the beacon/probe response, so + * they should be present here. This is just a safety net. + */ + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_HT) && + (!elems.wmm_param || !elems.ht_cap_elem || !elems.ht_operation)) { + sdata_info(sdata, + "HT AP is missing WMM params or HT capability/operation in AssocResp\n"); + return false; + } + + if (!(ifmgd->flags & IEEE80211_STA_DISABLE_VHT) && + (!elems.vht_cap_elem || !elems.vht_operation)) { + sdata_info(sdata, + "VHT AP is missing VHT capability/operation in AssocResp\n"); + return false; + } + mutex_lock(&sdata->local->sta_mtx); /* * station info was already allocated and inserted before @@ -2390,6 +2477,7 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, sband = local->hw.wiphy->bands[ieee80211_get_sdata_band(sdata)]; + /* Set up internal HT/VHT capabilities */ if (elems.ht_cap_elem && !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) ieee80211_ht_cap_ie_to_sta_ht_cap(sdata, sband, elems.ht_cap_elem, sta); @@ -2398,11 +2486,12 @@ static bool ieee80211_assoc_success(struct ieee80211_sub_if_data *sdata, ieee80211_vht_cap_ie_to_sta_vht_cap(sdata, sband, elems.vht_cap_elem, sta); - if (elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, sta, - elems.ht_operation, - cbss->bssid, false); + /* + * Some APs, e.g. Netgear WNDR3700, report invalid HT operation data + * in their association response, so ignore that data for our own + * configuration. If it changed since the last beacon, we'll get the + * next beacon and update then. + */ /* * If an operating mode notification IE is present, override the @@ -2679,10 +2768,10 @@ static const u64 care_about_ies = (1ULL << WLAN_EID_HT_CAPABILITY) | (1ULL << WLAN_EID_HT_OPERATION); -static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - size_t len, - struct ieee80211_rx_status *rx_status) +static enum rx_mgmt_action +ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len, + u8 *deauth_buf, struct ieee80211_rx_status *rx_status) { struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; struct ieee80211_bss_conf *bss_conf = &sdata->vif.bss_conf; @@ -2703,18 +2792,18 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, /* Process beacon from the current BSS */ baselen = (u8 *) mgmt->u.beacon.variable - (u8 *) mgmt; if (baselen > len) - return; + return RX_MGMT_NONE; rcu_read_lock(); chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); if (!chanctx_conf) { rcu_read_unlock(); - return; + return RX_MGMT_NONE; } if (rx_status->freq != chanctx_conf->def.chan->center_freq) { rcu_read_unlock(); - return; + return RX_MGMT_NONE; } chan = chanctx_conf->def.chan; rcu_read_unlock(); @@ -2742,12 +2831,12 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, ifmgd->assoc_data->timeout = jiffies; ifmgd->assoc_data->timeout_started = true; run_again(ifmgd, ifmgd->assoc_data->timeout); - return; + return RX_MGMT_NONE; } if (!ifmgd->associated || !ether_addr_equal(mgmt->bssid, ifmgd->associated->bssid)) - return; + return RX_MGMT_NONE; bssid = ifmgd->associated->bssid; /* Track average RSSI from the Beacon frames of the current AP */ @@ -2885,7 +2974,7 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, } if (ncrc == ifmgd->beacon_crc && ifmgd->beacon_crc_valid) - return; + return RX_MGMT_NONE; ifmgd->beacon_crc = ncrc; ifmgd->beacon_crc_valid = true; @@ -2934,11 +3023,14 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, mutex_lock(&local->sta_mtx); sta = sta_info_get(sdata, bssid); - if (elems.ht_cap_elem && elems.ht_operation && elems.wmm_param && - !(ifmgd->flags & IEEE80211_STA_DISABLE_HT)) - changed |= ieee80211_config_ht_tx(sdata, sta, - elems.ht_operation, - bssid, true); + if (ieee80211_config_bw(sdata, sta, elems.ht_operation, + elems.vht_operation, bssid, &changed)) { + mutex_unlock(&local->sta_mtx); + ieee80211_set_disassoc(sdata, IEEE80211_STYPE_DEAUTH, + WLAN_REASON_DEAUTH_LEAVING, + true, deauth_buf); + return RX_MGMT_CFG80211_TX_DEAUTH; + } if (sta && elems.opmode_notif) ieee80211_vht_handle_opmode(sdata, sta, *elems.opmode_notif, @@ -2954,6 +3046,8 @@ static void ieee80211_rx_mgmt_beacon(struct ieee80211_sub_if_data *sdata, elems.pwr_constr_elem); ieee80211_bss_info_change_notify(sdata, changed); + + return RX_MGMT_NONE; } void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, @@ -2964,6 +3058,7 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt; struct cfg80211_bss *bss = NULL; enum rx_mgmt_action rma = RX_MGMT_NONE; + u8 deauth_buf[IEEE80211_DEAUTH_FRAME_LEN]; u16 fc; rx_status = (struct ieee80211_rx_status *) skb->cb; @@ -2974,7 +3069,8 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, switch (fc & IEEE80211_FCTL_STYPE) { case IEEE80211_STYPE_BEACON: - ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, rx_status); + rma = ieee80211_rx_mgmt_beacon(sdata, mgmt, skb->len, + deauth_buf, rx_status); break; case IEEE80211_STYPE_PROBE_RESP: ieee80211_rx_mgmt_probe_resp(sdata, skb); @@ -3023,6 +3119,10 @@ void ieee80211_sta_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, case RX_MGMT_CFG80211_ASSOC_TIMEOUT: cfg80211_send_assoc_timeout(sdata->dev, mgmt->bssid); break; + case RX_MGMT_CFG80211_TX_DEAUTH: + cfg80211_send_deauth(sdata->dev, deauth_buf, + sizeof(deauth_buf)); + break; default: WARN(1, "unexpected: %d", rma); } @@ -3620,7 +3720,7 @@ static int ieee80211_prep_channel(struct ieee80211_sub_if_data *sdata, ifmgd->flags |= ieee80211_determine_chantype(sdata, sband, cbss->channel, ht_oper, vht_oper, - &chandef); + &chandef, true); sdata->needed_rx_chains = min(ieee80211_ht_vht_rx_chains(sdata, cbss), local->rx_chains); -- cgit v0.10.2 From c7a6ee27abd46247c1c7edfc49fb935138da7875 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:50:39 +0100 Subject: cfg80211: allow drivers to selectively disable 80/160 MHz Some drivers might support 80 or 160 MHz only on some channels for whatever reason, so allow them to disable these channel widths. Also maintain the new flags when regulatory bandwidth limitations would disable these wide channels. Reviewed-by: Luis R. Rodriguez Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index ee11a3d..8a9200f 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -100,6 +100,16 @@ enum ieee80211_band { * @IEEE80211_CHAN_NO_HT40MINUS: extension channel below this channel * is not permitted. * @IEEE80211_CHAN_NO_OFDM: OFDM is not allowed on this channel. + * @IEEE80211_CHAN_NO_80MHZ: If the driver supports 80 MHz on the band, + * this flag indicates that an 80 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. + * @IEEE80211_CHAN_NO_160MHZ: If the driver supports 160 MHz on the band, + * this flag indicates that an 160 MHz channel cannot use this + * channel as the control or any of the secondary channels. + * This may be due to the driver or due to regulatory bandwidth + * restrictions. */ enum ieee80211_channel_flags { IEEE80211_CHAN_DISABLED = 1<<0, @@ -109,6 +119,8 @@ enum ieee80211_channel_flags { IEEE80211_CHAN_NO_HT40PLUS = 1<<4, IEEE80211_CHAN_NO_HT40MINUS = 1<<5, IEEE80211_CHAN_NO_OFDM = 1<<6, + IEEE80211_CHAN_NO_80MHZ = 1<<7, + IEEE80211_CHAN_NO_160MHZ = 1<<8, }; #define IEEE80211_CHAN_NO_HT40 \ diff --git a/net/wireless/chan.c b/net/wireless/chan.c index 810c23c..fd556ac 100644 --- a/net/wireless/chan.c +++ b/net/wireless/chan.c @@ -375,6 +375,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, case NL80211_CHAN_WIDTH_80: if (!vht_cap->vht_supported) return false; + prohibited_flags |= IEEE80211_CHAN_NO_80MHZ; width = 80; break; case NL80211_CHAN_WIDTH_160: @@ -382,6 +383,7 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, return false; if (!(vht_cap->cap & IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ)) return false; + prohibited_flags |= IEEE80211_CHAN_NO_160MHZ; width = 160; break; default: @@ -389,7 +391,16 @@ bool cfg80211_chandef_usable(struct wiphy *wiphy, return false; } - /* TODO: missing regulatory check on 80/160 bandwidth */ + /* + * TODO: What if there are only certain 80/160/80+80 MHz channels + * allowed by the driver, or only certain combinations? + * For 40 MHz the driver can set the NO_HT40 flags, but for + * 80/160 MHz and in particular 80+80 MHz this isn't really + * feasible and we only have NO_80MHZ/NO_160MHZ so far but + * no way to cover 80+80 MHz or more complex restrictions. + * Note that such restrictions also need to be advertised to + * userspace, for example for P2P channel selection. + */ if (width > 20) prohibited_flags |= IEEE80211_CHAN_NO_OFDM; diff --git a/net/wireless/reg.c b/net/wireless/reg.c index e97d5b0..93ab840 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -866,6 +866,10 @@ static void handle_channel(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; if (lr->initiator == NL80211_REGDOM_SET_BY_DRIVER && request_wiphy && request_wiphy == wiphy && @@ -1264,6 +1268,10 @@ static void handle_channel_custom(struct wiphy *wiphy, if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40)) bw_flags = IEEE80211_CHAN_NO_HT40; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(80)) + bw_flags |= IEEE80211_CHAN_NO_80MHZ; + if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(160)) + bw_flags |= IEEE80211_CHAN_NO_160MHZ; chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags; chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain); -- cgit v0.10.2 From 50640f169372b9977487a328dedf13a8debedff7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Wed, 12 Dec 2012 17:59:39 +0100 Subject: nl80211: advertise HT/VHT channel limitations When drivers or regulatory have limitations on 40, 80 or 160 MHz channels, advertise these to userspace via nl80211. Also add a new feature flag to let userspace know this is supported. Signed-off-by: Johannes Berg diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 90b7af8..3880f6a 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -2041,6 +2041,16 @@ enum nl80211_band_attr { * (enum nl80211_dfs_state) * @NL80211_FREQUENCY_ATTR_DFS_TIME: time in miliseconds for how long * this channel is in this DFS state. + * @NL80211_FREQUENCY_ATTR_NO_HT40_MINUS: HT40- isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_HT40_PLUS: HT40+ isn't possible with this + * channel as the control channel + * @NL80211_FREQUENCY_ATTR_NO_80MHZ: any 80 MHz channel using this channel + * as the primary or any of the secondary channels isn't possible, + * this includes 80+80 channels + * @NL80211_FREQUENCY_ATTR_NO_160MHZ: any 160 MHz (but not 80+80) channel + * using this channel as the primary or any of the secondary channels + * isn't possible * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -2055,6 +2065,10 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_MAX_TX_POWER, NL80211_FREQUENCY_ATTR_DFS_STATE, NL80211_FREQUENCY_ATTR_DFS_TIME, + NL80211_FREQUENCY_ATTR_NO_HT40_MINUS, + NL80211_FREQUENCY_ATTR_NO_HT40_PLUS, + NL80211_FREQUENCY_ATTR_NO_80MHZ, + NL80211_FREQUENCY_ATTR_NO_160MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -3421,6 +3435,8 @@ enum nl80211_ap_sme_features { * Note that even for drivers that support this, the default is to add * stations in authenticated/associated state, so to add unauthenticated * stations the authenticated/associated bits have to be set in the mask. + * @NL80211_FEATURE_ADVERTISE_CHAN_LIMITS: cfg80211 advertises channel limits + * (HT40, VHT 80/160 MHz) if this flag is set */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, @@ -3437,6 +3453,7 @@ enum nl80211_feature_flags { NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, }; /** diff --git a/net/wireless/core.c b/net/wireless/core.c index 9220021..33b75b9 100644 --- a/net/wireless/core.c +++ b/net/wireless/core.c @@ -367,7 +367,8 @@ struct wiphy *wiphy_new(const struct cfg80211_ops *ops, int sizeof_priv) rdev->wiphy.rts_threshold = (u32) -1; rdev->wiphy.coverage_class = 0; - rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH; + rdev->wiphy.features = NL80211_FEATURE_SCAN_FLUSH | + NL80211_FEATURE_ADVERTISE_CHAN_LIMITS; return &rdev->wiphy; } diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index c1e18cc..7e40b9e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -562,6 +562,18 @@ static int nl80211_msg_put_channel(struct sk_buff *msg, if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_DFS_TIME, time)) goto nla_put_failure; } + if ((chan->flags & IEEE80211_CHAN_NO_HT40MINUS) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_MINUS)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_HT40PLUS) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_HT40_PLUS)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_80MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_80MHZ)) + goto nla_put_failure; + if ((chan->flags & IEEE80211_CHAN_NO_160MHZ) && + nla_put_flag(msg, NL80211_FREQUENCY_ATTR_NO_160MHZ)) + goto nla_put_failure; if (nla_put_u32(msg, NL80211_FREQUENCY_ATTR_MAX_TX_POWER, DBM_TO_MBM(chan->max_power))) -- cgit v0.10.2 From 4a3cb702b05868f67c4ee3da3380461c5b90b4ca Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 16:43:19 +0100 Subject: mac80211: constify IE parsing Make all the parsed IE pointers const, and propagate the change to all the users etc. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 12b5996..e085fcf 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -2152,7 +2152,7 @@ static inline unsigned long ieee80211_tu_to_usec(unsigned long tu) * @tim_len: length of the TIM IE * @aid: the AID to look for */ -static inline bool ieee80211_check_tim(struct ieee80211_tim_ie *tim, +static inline bool ieee80211_check_tim(const struct ieee80211_tim_ie *tim, u8 tim_len, u16 aid) { u8 mask; diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index 797969b..b84147a 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -94,7 +94,7 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, - struct ieee80211_ht_cap *ht_cap_ie, + const struct ieee80211_ht_cap *ht_cap_ie, struct sta_info *sta) { struct ieee80211_sta_ht_cap ht_cap; diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d107444..d702f7d 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -1163,41 +1163,41 @@ struct ieee80211_ra_tid { /* Parsed Information Elements */ struct ieee802_11_elems { - u8 *ie_start; + const u8 *ie_start; size_t total_len; /* pointers to IEs */ - u8 *ssid; - u8 *supp_rates; - u8 *fh_params; - u8 *ds_params; - u8 *cf_params; - struct ieee80211_tim_ie *tim; - u8 *ibss_params; - u8 *challenge; - u8 *rsn; - u8 *erp_info; - u8 *ext_supp_rates; - u8 *wmm_info; - u8 *wmm_param; - struct ieee80211_ht_cap *ht_cap_elem; - struct ieee80211_ht_operation *ht_operation; - struct ieee80211_vht_cap *vht_cap_elem; - struct ieee80211_vht_operation *vht_operation; - struct ieee80211_meshconf_ie *mesh_config; - u8 *mesh_id; - u8 *peering; - __le16 *awake_window; - u8 *preq; - u8 *prep; - u8 *perr; - struct ieee80211_rann_ie *rann; - struct ieee80211_channel_sw_ie *ch_switch_ie; - u8 *country_elem; - u8 *pwr_constr_elem; - u8 *quiet_elem; /* first quite element */ - u8 *timeout_int; - u8 *opmode_notif; + const u8 *ssid; + const u8 *supp_rates; + const u8 *fh_params; + const u8 *ds_params; + const u8 *cf_params; + const struct ieee80211_tim_ie *tim; + const u8 *ibss_params; + const u8 *challenge; + const u8 *rsn; + const u8 *erp_info; + const u8 *ext_supp_rates; + const u8 *wmm_info; + const u8 *wmm_param; + const struct ieee80211_ht_cap *ht_cap_elem; + const struct ieee80211_ht_operation *ht_operation; + const struct ieee80211_vht_cap *vht_cap_elem; + const struct ieee80211_vht_operation *vht_operation; + const struct ieee80211_meshconf_ie *mesh_config; + const u8 *mesh_id; + const u8 *peering; + const __le16 *awake_window; + const u8 *preq; + const u8 *prep; + const u8 *perr; + const struct ieee80211_rann_ie *rann; + const struct ieee80211_channel_sw_ie *ch_switch_ie; + const u8 *country_elem; + const u8 *pwr_constr_elem; + const u8 *quiet_elem; /* first quite element */ + const u8 *timeout_int; + const u8 *opmode_notif; /* length of them, respectively */ u8 ssid_len; @@ -1276,10 +1276,10 @@ void ieee80211_recalc_ps_vif(struct ieee80211_sub_if_data *sdata); int ieee80211_max_network_latency(struct notifier_block *nb, unsigned long data, void *dummy); int ieee80211_set_arp_filter(struct ieee80211_sub_if_data *sdata); -void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, - u64 timestamp); +void +ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_channel_sw_ie *sw_elem, + struct ieee80211_bss *bss, u64 timestamp); void ieee80211_sta_quiesce(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_restart(struct ieee80211_sub_if_data *sdata); void ieee80211_sta_work(struct ieee80211_sub_if_data *sdata); @@ -1387,7 +1387,7 @@ void ieee80211_apply_htcap_overrides(struct ieee80211_sub_if_data *sdata, struct ieee80211_sta_ht_cap *ht_cap); bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, struct ieee80211_supported_band *sband, - struct ieee80211_ht_cap *ht_cap_ie, + const struct ieee80211_ht_cap *ht_cap_ie, struct sta_info *sta); void ieee80211_send_delba(struct ieee80211_sub_if_data *sdata, const u8 *da, u16 tid, @@ -1428,10 +1428,11 @@ void ieee80211_release_reorder_timeout(struct sta_info *sta, int tid); u8 ieee80211_mcs_to_chains(const struct ieee80211_mcs_info *mcs); /* VHT */ -void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_vht_cap *vht_cap_ie, - struct sta_info *sta); +void +ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_vht_cap *vht_cap_ie, + struct sta_info *sta); enum ieee80211_sta_rx_bandwidth ieee80211_sta_cur_vht_bw(struct sta_info *sta); void ieee80211_sta_set_rx_nss(struct sta_info *sta); void ieee80211_vht_handle_opmode(struct ieee80211_sub_if_data *sdata, @@ -1555,7 +1556,7 @@ static inline void ieee80211_add_pending_skbs(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, - u8 *extra, size_t extra_len, const u8 *bssid, + const u8 *extra, size_t extra_len, const u8 *bssid, const u8 *da, const u8 *key, u8 key_len, u8 key_idx, u32 tx_flags); void ieee80211_send_deauth_disassoc(struct ieee80211_sub_if_data *sdata, @@ -1606,7 +1607,7 @@ int ieee80211_add_ext_srates_ie(struct ieee80211_sub_if_data *sdata, /* channel management */ void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan, - struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_ht_operation *ht_oper, struct cfg80211_chan_def *chandef); int __must_check diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index 7ad035f..a1bad31 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -265,8 +265,8 @@ int mesh_nexthop_lookup(struct sk_buff *skb, int mesh_nexthop_resolve(struct sk_buff *skb, struct ieee80211_sub_if_data *sdata); void mesh_path_start_discovery(struct ieee80211_sub_if_data *sdata); -struct mesh_path *mesh_path_lookup(u8 *dst, - struct ieee80211_sub_if_data *sdata); +struct mesh_path *mesh_path_lookup(const u8 *dst, + struct ieee80211_sub_if_data *sdata); struct mesh_path *mpp_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata); int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata); @@ -276,7 +276,7 @@ void mesh_path_fix_nexthop(struct mesh_path *mpath, struct sta_info *next_hop); void mesh_path_expire(struct ieee80211_sub_if_data *sdata); void mesh_rx_path_sel_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, size_t len); -int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata); +int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata); int mesh_path_add_gate(struct mesh_path *mpath); int mesh_path_send_to_gates(struct mesh_path *mpath); @@ -301,8 +301,9 @@ void mesh_sta_cleanup(struct sta_info *sta); void mesh_mpath_table_grow(void); void mesh_mpp_table_grow(void); /* Mesh paths */ -int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, __le16 target_rcode, - const u8 *ra, struct ieee80211_sub_if_data *sdata); +int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, + __le16 target_rcode, const u8 *ra, + struct ieee80211_sub_if_data *sdata); void mesh_path_assign_nexthop(struct mesh_path *mpath, struct sta_info *sta); void mesh_path_flush_pending(struct mesh_path *mpath); void mesh_path_tx_pending(struct mesh_path *mpath); diff --git a/net/mac80211/mesh_hwmp.c b/net/mac80211/mesh_hwmp.c index f0dd874..585c1e2 100644 --- a/net/mac80211/mesh_hwmp.c +++ b/net/mac80211/mesh_hwmp.c @@ -30,14 +30,14 @@ static void mesh_queue_preq(struct mesh_path *, u8); -static inline u32 u32_field_get(u8 *preq_elem, int offset, bool ae) +static inline u32 u32_field_get(const u8 *preq_elem, int offset, bool ae) { if (ae) offset += 6; return get_unaligned_le32(preq_elem + offset); } -static inline u32 u16_field_get(u8 *preq_elem, int offset, bool ae) +static inline u32 u16_field_get(const u8 *preq_elem, int offset, bool ae) { if (ae) offset += 6; @@ -102,10 +102,13 @@ enum mpath_frame_type { static const u8 broadcast_addr[ETH_ALEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff}; static int mesh_path_sel_frame_tx(enum mpath_frame_type action, u8 flags, - u8 *orig_addr, __le32 orig_sn, u8 target_flags, u8 *target, - __le32 target_sn, const u8 *da, u8 hop_count, u8 ttl, - __le32 lifetime, __le32 metric, __le32 preq_id, - struct ieee80211_sub_if_data *sdata) + const u8 *orig_addr, __le32 orig_sn, + u8 target_flags, const u8 *target, + __le32 target_sn, const u8 *da, + u8 hop_count, u8 ttl, + __le32 lifetime, __le32 metric, + __le32 preq_id, + struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct sk_buff *skb; @@ -235,7 +238,7 @@ static void prepare_frame_for_deferred_tx(struct ieee80211_sub_if_data *sdata, * also acquires in the TX path. To avoid a deadlock we don't transmit the * frame directly but add it to the pending queue instead. */ -int mesh_path_error_tx(u8 ttl, u8 *target, __le32 target_sn, +int mesh_path_error_tx(u8 ttl, const u8 *target, __le32 target_sn, __le16 target_rcode, const u8 *ra, struct ieee80211_sub_if_data *sdata) { @@ -369,14 +372,14 @@ static u32 airtime_link_metric_get(struct ieee80211_local *local, * path routing information is updated. */ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - u8 *hwmp_ie, enum mpath_frame_type action) + struct ieee80211_mgmt *mgmt, + const u8 *hwmp_ie, enum mpath_frame_type action) { struct ieee80211_local *local = sdata->local; struct mesh_path *mpath; struct sta_info *sta; bool fresh_info; - u8 *orig_addr, *ta; + const u8 *orig_addr, *ta; u32 orig_sn, orig_metric; unsigned long orig_lifetime, exp_time; u32 last_hop_metric, new_metric; @@ -511,11 +514,11 @@ static u32 hwmp_route_info_get(struct ieee80211_sub_if_data *sdata, static void hwmp_preq_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - u8 *preq_elem, u32 metric) + const u8 *preq_elem, u32 metric) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath = NULL; - u8 *target_addr, *orig_addr; + const u8 *target_addr, *orig_addr; const u8 *da; u8 target_flags, ttl, flags; u32 orig_sn, target_sn, lifetime, orig_metric; @@ -648,11 +651,11 @@ next_hop_deref_protected(struct mesh_path *mpath) static void hwmp_prep_frame_process(struct ieee80211_sub_if_data *sdata, struct ieee80211_mgmt *mgmt, - u8 *prep_elem, u32 metric) + const u8 *prep_elem, u32 metric) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; - u8 *target_addr, *orig_addr; + const u8 *target_addr, *orig_addr; u8 ttl, hopcount, flags; u8 next_hop[ETH_ALEN]; u32 target_sn, orig_sn, lifetime; @@ -711,12 +714,13 @@ fail: } static void hwmp_perr_frame_process(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, u8 *perr_elem) + struct ieee80211_mgmt *mgmt, + const u8 *perr_elem) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct mesh_path *mpath; u8 ttl; - u8 *ta, *target_addr; + const u8 *ta, *target_addr; u32 target_sn; u16 target_rcode; @@ -758,15 +762,15 @@ endperr: } static void hwmp_rann_frame_process(struct ieee80211_sub_if_data *sdata, - struct ieee80211_mgmt *mgmt, - struct ieee80211_rann_ie *rann) + struct ieee80211_mgmt *mgmt, + const struct ieee80211_rann_ie *rann) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; struct sta_info *sta; struct mesh_path *mpath; u8 ttl, flags, hopcount; - u8 *orig_addr; + const u8 *orig_addr; u32 orig_sn, metric, metric_txsta, interval; bool root_is_gate; diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c index d5786c3..2ce4c40 100644 --- a/net/mac80211/mesh_pathtbl.c +++ b/net/mac80211/mesh_pathtbl.c @@ -181,7 +181,7 @@ errcopy: return -ENOMEM; } -static u32 mesh_table_hash(u8 *addr, struct ieee80211_sub_if_data *sdata, +static u32 mesh_table_hash(const u8 *addr, struct ieee80211_sub_if_data *sdata, struct mesh_table *tbl) { /* Use last four bytes of hw addr and interface index as hash index */ @@ -326,8 +326,8 @@ static void mesh_path_move_to_queue(struct mesh_path *gate_mpath, } -static struct mesh_path *mpath_lookup(struct mesh_table *tbl, u8 *dst, - struct ieee80211_sub_if_data *sdata) +static struct mesh_path *mpath_lookup(struct mesh_table *tbl, const u8 *dst, + struct ieee80211_sub_if_data *sdata) { struct mesh_path *mpath; struct hlist_node *n; @@ -359,7 +359,8 @@ static struct mesh_path *mpath_lookup(struct mesh_table *tbl, u8 *dst, * * Locking: must be called within a read rcu section. */ -struct mesh_path *mesh_path_lookup(u8 *dst, struct ieee80211_sub_if_data *sdata) +struct mesh_path *mesh_path_lookup(const u8 *dst, + struct ieee80211_sub_if_data *sdata) { return mpath_lookup(rcu_dereference(mesh_paths), dst, sdata); } @@ -494,7 +495,7 @@ int mesh_gate_num(struct ieee80211_sub_if_data *sdata) * * State: the initial state of the new path is set to 0 */ -int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata) +int mesh_path_add(const u8 *dst, struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 05b229e..7a8cd78 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -1041,10 +1041,10 @@ static void ieee80211_chswitch_timer(unsigned long data) ieee80211_queue_work(&sdata->local->hw, &ifmgd->chswitch_work); } -void ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, - struct ieee80211_channel_sw_ie *sw_elem, - struct ieee80211_bss *bss, - u64 timestamp) +void +ieee80211_sta_process_chanswitch(struct ieee80211_sub_if_data *sdata, + const struct ieee80211_channel_sw_ie *sw_elem, + struct ieee80211_bss *bss, u64 timestamp) { struct cfg80211_bss *cbss = container_of((void *)bss, struct cfg80211_bss, priv); @@ -1479,13 +1479,14 @@ void ieee80211_dfs_cac_timer_work(struct work_struct *work) /* MLME */ static bool ieee80211_sta_wmm_params(struct ieee80211_local *local, struct ieee80211_sub_if_data *sdata, - u8 *wmm_param, size_t wmm_param_len) + const u8 *wmm_param, size_t wmm_param_len) { struct ieee80211_tx_queue_params params; struct ieee80211_if_managed *ifmgd = &sdata->u.mgd; size_t left; int count; - u8 *pos, uapsd_queues = 0; + const u8 *pos; + u8 uapsd_queues = 0; if (!local->ops->conf_tx) return false; @@ -2670,7 +2671,7 @@ static void ieee80211_rx_bss_info(struct ieee80211_sub_if_data *sdata, need_ps = sdata->u.mgd.associated && !sdata->u.mgd.dtim_period; if (elems->tim && !elems->parse_error) { - struct ieee80211_tim_ie *tim_ie = elems->tim; + const struct ieee80211_tim_ie *tim_ie = elems->tim; sdata->u.mgd.dtim_period = tim_ie->dtim_period; } } diff --git a/net/mac80211/util.c b/net/mac80211/util.c index e24ff38..0f38f43 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -1035,7 +1035,7 @@ u32 ieee80211_mandatory_rates(struct ieee80211_local *local, void ieee80211_send_auth(struct ieee80211_sub_if_data *sdata, u16 transaction, u16 auth_alg, u16 status, - u8 *extra, size_t extra_len, const u8 *da, + const u8 *extra, size_t extra_len, const u8 *da, const u8 *bssid, const u8 *key, u8 key_len, u8 key_idx, u32 tx_flags) { @@ -1947,7 +1947,7 @@ u8 *ieee80211_ie_build_ht_oper(u8 *pos, struct ieee80211_sta_ht_cap *ht_cap, } void ieee80211_ht_oper_to_chandef(struct ieee80211_channel *control_chan, - struct ieee80211_ht_operation *ht_oper, + const struct ieee80211_ht_operation *ht_oper, struct cfg80211_chan_def *chandef) { enum nl80211_channel_type channel_type; diff --git a/net/mac80211/vht.c b/net/mac80211/vht.c index a9549fc..a2c2258 100644 --- a/net/mac80211/vht.c +++ b/net/mac80211/vht.c @@ -13,10 +13,11 @@ #include "rate.h" -void ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, - struct ieee80211_supported_band *sband, - struct ieee80211_vht_cap *vht_cap_ie, - struct sta_info *sta) +void +ieee80211_vht_cap_ie_to_sta_vht_cap(struct ieee80211_sub_if_data *sdata, + struct ieee80211_supported_band *sband, + const struct ieee80211_vht_cap *vht_cap_ie, + struct sta_info *sta) { struct ieee80211_sta_vht_cap *vht_cap = &sta->sta.vht_cap; -- cgit v0.10.2 From 2b5e19677592c167d012c2d129407f39d2bdeb8d Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 14 Feb 2013 11:20:13 -0800 Subject: mac80211: cache mesh beacon Previously, the entire mesh beacon would be generated each time the beacon timer fired. Instead generate a beacon head and tail (so the TIM can easily be inserted when mesh power save is on) when starting a mesh or the MBSS parameters change. Also add a mutex for protecting beacon updates and preventing leaks. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index c3869ba..0800fb3 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1800,11 +1800,10 @@ static int ieee80211_update_mesh_config(struct wiphy *wiphy, conf->power_mode = nconf->power_mode; ieee80211_mps_local_status_update(sdata); } - if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) { + if (_chg_mesh_attr(NL80211_MESHCONF_AWAKE_WINDOW, mask)) conf->dot11MeshAwakeWindowDuration = nconf->dot11MeshAwakeWindowDuration; - ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON); - } + ieee80211_mbss_info_change_notify(sdata, BSS_CHANGED_BEACON); return 0; } @@ -1830,9 +1829,7 @@ static int ieee80211_join_mesh(struct wiphy *wiphy, struct net_device *dev, if (err) return err; - ieee80211_start_mesh(sdata); - - return 0; + return ieee80211_start_mesh(sdata); } static int ieee80211_leave_mesh(struct wiphy *wiphy, struct net_device *dev) diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index d702f7d..388580a 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -580,6 +580,9 @@ struct ieee80211_if_mesh { u32 mesh_seqnum; bool accepting_plinks; int num_gates; + struct beacon_data __rcu *beacon; + /* just protects beacon updates for now */ + struct mutex mtx; const u8 *ie; u8 ie_len; enum { diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 0adec3d..6ff8ee9 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -171,7 +171,7 @@ void mesh_sta_cleanup(struct sta_info *sta) } if (changed) - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } int mesh_rmc_init(struct ieee80211_sub_if_data *sdata) @@ -593,7 +593,7 @@ static void ieee80211_mesh_housekeeping(struct ieee80211_sub_if_data *sdata, mesh_path_expire(sdata); changed = mesh_accept_plinks_update(sdata); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); mod_timer(&ifmsh->housekeeping_timer, round_jiffies(jiffies + IEEE80211_MESH_HOUSEKEEPING_INTERVAL)); @@ -644,7 +644,140 @@ void ieee80211_mesh_restart(struct ieee80211_sub_if_data *sdata) } #endif -void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) +static int +ieee80211_mesh_build_beacon(struct ieee80211_if_mesh *ifmsh) +{ + struct beacon_data *bcn; + int head_len, tail_len; + struct sk_buff *skb; + struct ieee80211_mgmt *mgmt; + struct ieee80211_chanctx_conf *chanctx_conf; + enum ieee80211_band band; + u8 *pos; + struct ieee80211_sub_if_data *sdata; + int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) + + sizeof(mgmt->u.beacon); + + sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); + rcu_read_lock(); + chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf); + band = chanctx_conf->def.chan->band; + rcu_read_unlock(); + + head_len = hdr_len + + 2 + /* NULL SSID */ + 2 + 8 + /* supported rates */ + 2 + 3; /* DS params */ + tail_len = 2 + (IEEE80211_MAX_SUPP_RATES - 8) + + 2 + sizeof(struct ieee80211_ht_cap) + + 2 + sizeof(struct ieee80211_ht_operation) + + 2 + ifmsh->mesh_id_len + + 2 + sizeof(struct ieee80211_meshconf_ie) + + 2 + sizeof(__le16) + /* awake window */ + ifmsh->ie_len; + + bcn = kzalloc(sizeof(*bcn) + head_len + tail_len, GFP_KERNEL); + /* need an skb for IE builders to operate on */ + skb = dev_alloc_skb(max(head_len, tail_len)); + + if (!bcn || !skb) + goto out_free; + + /* + * pointers go into the block we allocated, + * memory is | beacon_data | head | tail | + */ + bcn->head = ((u8 *) bcn) + sizeof(*bcn); + + /* fill in the head */ + mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); + memset(mgmt, 0, hdr_len); + mgmt->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_BEACON); + eth_broadcast_addr(mgmt->da); + memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); + memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); + ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); + mgmt->u.beacon.beacon_int = + cpu_to_le16(sdata->vif.bss_conf.beacon_int); + mgmt->u.beacon.capab_info |= cpu_to_le16( + sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); + + pos = skb_put(skb, 2); + *pos++ = WLAN_EID_SSID; + *pos++ = 0x0; + + if (ieee80211_add_srates_ie(sdata, skb, true, band) || + mesh_add_ds_params_ie(skb, sdata)) + goto out_free; + + bcn->head_len = skb->len; + memcpy(bcn->head, skb->data, bcn->head_len); + + /* now the tail */ + skb_trim(skb, 0); + bcn->tail = bcn->head + bcn->head_len; + + if (ieee80211_add_ext_srates_ie(sdata, skb, true, band) || + mesh_add_rsn_ie(skb, sdata) || + mesh_add_ht_cap_ie(skb, sdata) || + mesh_add_ht_oper_ie(skb, sdata) || + mesh_add_meshid_ie(skb, sdata) || + mesh_add_meshconf_ie(skb, sdata) || + mesh_add_awake_window_ie(skb, sdata) || + mesh_add_vendor_ies(skb, sdata)) + goto out_free; + + bcn->tail_len = skb->len; + memcpy(bcn->tail, skb->data, bcn->tail_len); + + dev_kfree_skb(skb); + rcu_assign_pointer(ifmsh->beacon, bcn); + return 0; +out_free: + kfree(bcn); + dev_kfree_skb(skb); + return -ENOMEM; +} + +static int +ieee80211_mesh_rebuild_beacon(struct ieee80211_if_mesh *ifmsh) +{ + struct ieee80211_sub_if_data *sdata; + struct beacon_data *old_bcn; + int ret; + sdata = container_of(ifmsh, struct ieee80211_sub_if_data, u.mesh); + + mutex_lock(&ifmsh->mtx); + + old_bcn = rcu_dereference_protected(ifmsh->beacon, + lockdep_is_held(&ifmsh->mtx)); + ret = ieee80211_mesh_build_beacon(ifmsh); + if (ret) + /* just reuse old beacon */ + goto out; + + if (old_bcn) + kfree_rcu(old_bcn, rcu_head); +out: + mutex_unlock(&ifmsh->mtx); + return ret; +} + +void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u32 changed) +{ + if (sdata->vif.bss_conf.enable_beacon && + (changed & (BSS_CHANGED_BEACON | + BSS_CHANGED_HT | + BSS_CHANGED_BASIC_RATES | + BSS_CHANGED_BEACON_INT))) + if (ieee80211_mesh_rebuild_beacon(&sdata->u.mesh)) + return; + ieee80211_bss_info_change_notify(sdata, changed); +} + +int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; struct ieee80211_local *local = sdata->local; @@ -677,15 +810,22 @@ void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata) changed |= ieee80211_mps_local_status_update(sdata); + if (ieee80211_mesh_build_beacon(ifmsh)) { + ieee80211_stop_mesh(sdata); + return -ENOMEM; + } + ieee80211_bss_info_change_notify(sdata, changed); netif_carrier_on(sdata->dev); + return 0; } void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) { struct ieee80211_local *local = sdata->local; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct beacon_data *bcn; netif_carrier_off(sdata->dev); @@ -694,6 +834,12 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sdata->vif.bss_conf.enable_beacon = false; clear_bit(SDATA_STATE_OFFCHANNEL_BEACON_STOPPED, &sdata->state); ieee80211_bss_info_change_notify(sdata, BSS_CHANGED_BEACON_ENABLED); + mutex_lock(&ifmsh->mtx); + bcn = rcu_dereference_protected(ifmsh->beacon, + lockdep_is_held(&ifmsh->mtx)); + rcu_assign_pointer(ifmsh->beacon, NULL); + kfree_rcu(bcn, rcu_head); + mutex_unlock(&ifmsh->mtx); /* flush STAs and mpaths on this iface */ sta_info_flush(sdata); @@ -883,6 +1029,8 @@ void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata) skb_queue_head_init(&ifmsh->ps.bc_buf); spin_lock_init(&ifmsh->mesh_preq_queue_lock); spin_lock_init(&ifmsh->sync_offset_lock); + RCU_INIT_POINTER(ifmsh->beacon, NULL); + mutex_init(&ifmsh->mtx); sdata->vif.bss_conf.bssid = zero_addr; } diff --git a/net/mac80211/mesh.h b/net/mac80211/mesh.h index a1bad31..1a1da87 100644 --- a/net/mac80211/mesh.h +++ b/net/mac80211/mesh.h @@ -239,10 +239,13 @@ void ieee80211s_update_metric(struct ieee80211_local *local, struct sta_info *sta, struct sk_buff *skb); void ieee80211s_stop(void); void ieee80211_mesh_init_sdata(struct ieee80211_sub_if_data *sdata); -void ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); +int ieee80211_start_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata); void ieee80211_mesh_root_setup(struct ieee80211_if_mesh *ifmsh); const struct ieee80211_mesh_sync_ops *ieee80211_mesh_sync_ops_get(u8 method); +/* wrapper for ieee80211_bss_info_change_notify() */ +void ieee80211_mbss_info_change_notify(struct ieee80211_sub_if_data *sdata, + u32 changed); /* mesh power save */ u32 ieee80211_mps_local_status_update(struct ieee80211_sub_if_data *sdata); diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c index 7765139..f7526e5 100644 --- a/net/mac80211/mesh_plink.c +++ b/net/mac80211/mesh_plink.c @@ -508,7 +508,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata, ieee80211_mps_frame_release(sta, elems); out: rcu_read_unlock(); - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } static void mesh_plink_timer(unsigned long data) @@ -1090,5 +1090,5 @@ void mesh_rx_plink_frame(struct ieee80211_sub_if_data *sdata, struct ieee80211_m rcu_read_unlock(); if (changed) - ieee80211_bss_info_change_notify(sdata, changed); + ieee80211_mbss_info_change_notify(sdata, changed); } diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index 7d8c629..fe644f9 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -2444,71 +2444,26 @@ struct sk_buff *ieee80211_beacon_get_tim(struct ieee80211_hw *hw, hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); } else if (ieee80211_vif_is_mesh(&sdata->vif)) { - struct ieee80211_mgmt *mgmt; struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; - u8 *pos; - int hdr_len = offsetof(struct ieee80211_mgmt, u.beacon) + - sizeof(mgmt->u.beacon); + struct beacon_data *bcn = rcu_dereference(ifmsh->beacon); -#ifdef CONFIG_MAC80211_MESH - if (!sdata->u.mesh.mesh_id_len) + if (!bcn) goto out; -#endif if (ifmsh->sync_ops) ifmsh->sync_ops->adjust_tbtt( sdata); skb = dev_alloc_skb(local->tx_headroom + - hdr_len + - 2 + /* NULL SSID */ - 2 + 8 + /* supported rates */ - 2 + 3 + /* DS params */ + bcn->head_len + 256 + /* TIM IE */ - 2 + (IEEE80211_MAX_SUPP_RATES - 8) + - 2 + sizeof(struct ieee80211_ht_cap) + - 2 + sizeof(struct ieee80211_ht_operation) + - 2 + sdata->u.mesh.mesh_id_len + - 2 + sizeof(struct ieee80211_meshconf_ie) + - sdata->u.mesh.ie_len + - 2 + sizeof(__le16)); /* awake window */ + bcn->tail_len); if (!skb) goto out; - - skb_reserve(skb, local->hw.extra_tx_headroom); - mgmt = (struct ieee80211_mgmt *) skb_put(skb, hdr_len); - memset(mgmt, 0, hdr_len); - mgmt->frame_control = - cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); - eth_broadcast_addr(mgmt->da); - memcpy(mgmt->sa, sdata->vif.addr, ETH_ALEN); - memcpy(mgmt->bssid, sdata->vif.addr, ETH_ALEN); - ieee80211_mps_set_frame_flags(sdata, NULL, (void *) mgmt); - mgmt->u.beacon.beacon_int = - cpu_to_le16(sdata->vif.bss_conf.beacon_int); - mgmt->u.beacon.capab_info |= cpu_to_le16( - sdata->u.mesh.security ? WLAN_CAPABILITY_PRIVACY : 0); - - pos = skb_put(skb, 2); - *pos++ = WLAN_EID_SSID; - *pos++ = 0x0; - - band = chanctx_conf->def.chan->band; - - if (ieee80211_add_srates_ie(sdata, skb, true, band) || - mesh_add_ds_params_ie(skb, sdata) || - ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb) || - ieee80211_add_ext_srates_ie(sdata, skb, true, band) || - mesh_add_rsn_ie(skb, sdata) || - mesh_add_ht_cap_ie(skb, sdata) || - mesh_add_ht_oper_ie(skb, sdata) || - mesh_add_meshid_ie(skb, sdata) || - mesh_add_meshconf_ie(skb, sdata) || - mesh_add_awake_window_ie(skb, sdata) || - mesh_add_vendor_ies(skb, sdata)) { - pr_err("o11s: couldn't add ies!\n"); - goto out; - } + skb_reserve(skb, local->tx_headroom); + memcpy(skb_put(skb, bcn->head_len), bcn->head, bcn->head_len); + ieee80211_beacon_add_tim(sdata, &ifmsh->ps, skb); + memcpy(skb_put(skb, bcn->tail_len), bcn->tail, bcn->tail_len); } else { WARN_ON(1); goto out; -- cgit v0.10.2 From 9fb04b501a57ad29fa989ab3cd2123482e7eac5f Mon Sep 17 00:00:00 2001 From: Thomas Pedersen Date: Thu, 14 Feb 2013 11:20:14 -0800 Subject: mac80211: generate mesh probe responses Mesh interfaces will now respond to any broadcast (or matching directed mesh) probe requests with a probe response. Signed-off-by: Thomas Pedersen Signed-off-by: Johannes Berg diff --git a/net/mac80211/mesh.c b/net/mac80211/mesh.c index 6ff8ee9..a77d40e 100644 --- a/net/mac80211/mesh.c +++ b/net/mac80211/mesh.c @@ -868,6 +868,63 @@ void ieee80211_stop_mesh(struct ieee80211_sub_if_data *sdata) sdata->u.mesh.timers_running = 0; } +static void +ieee80211_mesh_rx_probe_req(struct ieee80211_sub_if_data *sdata, + struct ieee80211_mgmt *mgmt, size_t len) +{ + struct ieee80211_local *local = sdata->local; + struct ieee80211_if_mesh *ifmsh = &sdata->u.mesh; + struct sk_buff *presp; + struct beacon_data *bcn; + struct ieee80211_mgmt *hdr; + struct ieee802_11_elems elems; + size_t baselen; + u8 *pos, *end; + + end = ((u8 *) mgmt) + len; + pos = mgmt->u.probe_req.variable; + baselen = (u8 *) pos - (u8 *) mgmt; + if (baselen > len) + return; + + ieee802_11_parse_elems(pos, len - baselen, &elems); + + /* 802.11-2012 10.1.4.3.2 */ + if ((!ether_addr_equal(mgmt->da, sdata->vif.addr) && + !is_broadcast_ether_addr(mgmt->da)) || + elems.ssid_len != 0) + return; + + if (elems.mesh_id_len != 0 && + (elems.mesh_id_len != ifmsh->mesh_id_len || + memcmp(elems.mesh_id, ifmsh->mesh_id, ifmsh->mesh_id_len))) + return; + + rcu_read_lock(); + bcn = rcu_dereference(ifmsh->beacon); + + if (!bcn) + goto out; + + presp = dev_alloc_skb(local->tx_headroom + + bcn->head_len + bcn->tail_len); + if (!presp) + goto out; + + skb_reserve(presp, local->tx_headroom); + memcpy(skb_put(presp, bcn->head_len), bcn->head, bcn->head_len); + memcpy(skb_put(presp, bcn->tail_len), bcn->tail, bcn->tail_len); + hdr = (struct ieee80211_mgmt *) presp->data; + hdr->frame_control = cpu_to_le16(IEEE80211_FTYPE_MGMT | + IEEE80211_STYPE_PROBE_RESP); + memcpy(hdr->da, mgmt->sa, ETH_ALEN); + mpl_dbg(sdata, "sending probe resp. to %pM\n", hdr->da); + IEEE80211_SKB_CB(presp)->flags |= IEEE80211_TX_INTFL_DONT_ENCRYPT; + ieee80211_tx_skb(sdata, presp); +out: + rcu_read_unlock(); +} + static void ieee80211_mesh_rx_bcn_presp(struct ieee80211_sub_if_data *sdata, u16 stype, struct ieee80211_mgmt *mgmt, @@ -957,6 +1014,9 @@ void ieee80211_mesh_rx_queued_mgmt(struct ieee80211_sub_if_data *sdata, ieee80211_mesh_rx_bcn_presp(sdata, stype, mgmt, skb->len, rx_status); break; + case IEEE80211_STYPE_PROBE_REQ: + ieee80211_mesh_rx_probe_req(sdata, mgmt, skb->len); + break; case IEEE80211_STYPE_ACTION: ieee80211_mesh_rx_mgmt_action(sdata, mgmt, skb->len, rx_status); break; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 30f1ba6..296a4ae 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2718,8 +2718,9 @@ ieee80211_rx_h_mgmt(struct ieee80211_rx_data *rx) return RX_DROP_MONITOR; break; case cpu_to_le16(IEEE80211_STYPE_PROBE_REQ): - /* process only for ibss */ - if (sdata->vif.type != NL80211_IFTYPE_ADHOC) + /* process only for ibss and mesh */ + if (sdata->vif.type != NL80211_IFTYPE_ADHOC && + sdata->vif.type != NL80211_IFTYPE_MESH_POINT) return RX_DROP_MONITOR; break; default: -- cgit v0.10.2 From af0ed69badc67a0b6e976543f52029fce9ac8f69 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Tue, 12 Feb 2013 14:21:00 +0100 Subject: mac80211: stop modifying HT SMPS capability Instead of modifying the HT SMPS capability field for stations, track the SMPS mode explicitly in a new field in the station struct and use it in the drivers that care about it. This simplifies the code using it. Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/iwlegacy/4965-rs.c b/drivers/net/wireless/iwlegacy/4965-rs.c index f3b8e91..e8324b5 100644 --- a/drivers/net/wireless/iwlegacy/4965-rs.c +++ b/drivers/net/wireless/iwlegacy/4965-rs.c @@ -1183,8 +1183,7 @@ il4965_rs_switch_to_mimo2(struct il_priv *il, struct il_lq_sta *lq_sta, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) == - WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlegacy/common.c b/drivers/net/wireless/iwlegacy/common.c index 1f59860..4c9aafb 100644 --- a/drivers/net/wireless/iwlegacy/common.c +++ b/drivers/net/wireless/iwlegacy/common.c @@ -1830,32 +1830,30 @@ il_set_ht_add_station(struct il_priv *il, u8 idx, struct ieee80211_sta *sta) { struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; __le32 sta_flags; - u8 mimo_ps_mode; if (!sta || !sta_ht_inf->ht_supported) goto done; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; D_ASSOC("spatial multiplexing power save mode: %s\n", - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? "static" : - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? "dynamic" : + (sta->smps_mode == IEEE80211_SMPS_STATIC) ? "static" : + (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" : "disabled"); sta_flags = il->stations[idx].sta.station_flags; sta_flags &= ~(STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK); - switch (mimo_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: + switch (sta->smps_mode) { + case IEEE80211_SMPS_STATIC: sta_flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: + case IEEE80211_SMPS_DYNAMIC: sta_flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_SM_PS_DISABLED: + case IEEE80211_SMPS_OFF: break; default: - IL_WARN("Invalid MIMO PS mode %d\n", mimo_ps_mode); + IL_WARN("Invalid MIMO PS mode %d\n", sta->smps_mode); break; } diff --git a/drivers/net/wireless/iwlwifi/dvm/rs.c b/drivers/net/wireless/iwlwifi/dvm/rs.c index b25de02..abe3042 100644 --- a/drivers/net/wireless/iwlwifi/dvm/rs.c +++ b/drivers/net/wireless/iwlwifi/dvm/rs.c @@ -1289,8 +1289,7 @@ static int rs_switch_to_mimo2(struct iwl_priv *priv, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ @@ -1345,8 +1344,7 @@ static int rs_switch_to_mimo3(struct iwl_priv *priv, if (!conf_is_ht(conf) || !sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/iwlwifi/dvm/sta.c b/drivers/net/wireless/iwlwifi/dvm/sta.c index 6deab38..d5faf74 100644 --- a/drivers/net/wireless/iwlwifi/dvm/sta.c +++ b/drivers/net/wireless/iwlwifi/dvm/sta.c @@ -196,7 +196,6 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, __le32 *flags, __le32 *mask) { struct ieee80211_sta_ht_cap *sta_ht_inf = &sta->ht_cap; - u8 mimo_ps_mode; *mask = STA_FLG_RTS_MIMO_PROT_MSK | STA_FLG_MIMO_DIS_MSK | @@ -208,26 +207,24 @@ static void iwl_sta_calc_ht_flags(struct iwl_priv *priv, if (!sta || !sta_ht_inf->ht_supported) return; - mimo_ps_mode = (sta_ht_inf->cap & IEEE80211_HT_CAP_SM_PS) >> 2; - IWL_DEBUG_INFO(priv, "STA %pM SM PS mode: %s\n", sta->addr, - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_STATIC) ? + (sta->smps_mode == IEEE80211_SMPS_STATIC) ? "static" : - (mimo_ps_mode == WLAN_HT_CAP_SM_PS_DYNAMIC) ? + (sta->smps_mode == IEEE80211_SMPS_DYNAMIC) ? "dynamic" : "disabled"); - switch (mimo_ps_mode) { - case WLAN_HT_CAP_SM_PS_STATIC: + switch (sta->smps_mode) { + case IEEE80211_SMPS_STATIC: *flags |= STA_FLG_MIMO_DIS_MSK; break; - case WLAN_HT_CAP_SM_PS_DYNAMIC: + case IEEE80211_SMPS_DYNAMIC: *flags |= STA_FLG_RTS_MIMO_PROT_MSK; break; - case WLAN_HT_CAP_SM_PS_DISABLED: + case IEEE80211_SMPS_OFF: break; default: - IWL_WARN(priv, "Invalid MIMO PS mode %d\n", mimo_ps_mode); + IWL_WARN(priv, "Invalid MIMO PS mode %d\n", sta->smps_mode); break; } diff --git a/drivers/net/wireless/iwlwifi/mvm/rs.c b/drivers/net/wireless/iwlwifi/mvm/rs.c index 8ba36e5..56b636d 100644 --- a/drivers/net/wireless/iwlwifi/mvm/rs.c +++ b/drivers/net/wireless/iwlwifi/mvm/rs.c @@ -1229,8 +1229,7 @@ static int rs_switch_to_mimo2(struct iwl_mvm *mvm, if (!sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ @@ -1282,8 +1281,7 @@ static int rs_switch_to_mimo3(struct iwl_mvm *mvm, if (!sta->ht_cap.ht_supported) return -1; - if (((sta->ht_cap.cap & IEEE80211_HT_CAP_SM_PS) >> 2) - == WLAN_HT_CAP_SM_PS_STATIC) + if (sta->smps_mode == IEEE80211_SMPS_STATIC) return -1; /* Need both Tx chains/antennas to support MIMO */ diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index f35d85a..9503e69 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -343,10 +343,7 @@ static void rt2x00queue_create_tx_descriptor_ht(struct rt2x00_dev *rt2x00dev, * when using more then one tx stream (>MCS7). */ if (sta && txdesc->u.ht.mcs > 7 && - ((sta->ht_cap.cap & - IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT) == - WLAN_HT_CAP_SM_PS_DYNAMIC) + sta->smps_mode == IEEE80211_SMPS_DYNAMIC) __set_bit(ENTRY_TXD_HT_MIMO_PS, &txdesc->flags); } else { txdesc->u.ht.mcs = rt2x00_get_rate_mcs(hwrate->mcs); diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 54e2add..f7eba13 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -1245,6 +1245,7 @@ enum ieee80211_sta_rx_bandwidth { * station can receive at the moment, changed by operating mode * notifications and capabilities. The value is only valid after * the station moves to associated state. + * @smps_mode: current SMPS mode (off, static or dynamic) */ struct ieee80211_sta { u32 supp_rates[IEEE80211_NUM_BANDS]; @@ -1257,6 +1258,7 @@ struct ieee80211_sta { u8 max_sp; u8 rx_nss; enum ieee80211_sta_rx_bandwidth bandwidth; + enum ieee80211_smps_mode smps_mode; /* must be last */ u8 drv_priv[0] __aligned(sizeof(void *)); diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index b84147a..0db25d4 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -102,6 +102,7 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, int i, max_tx_streams; bool changed; enum ieee80211_sta_rx_bandwidth bw; + enum ieee80211_smps_mode smps_mode; memset(&ht_cap, 0, sizeof(ht_cap)); @@ -216,6 +217,24 @@ bool ieee80211_ht_cap_ie_to_sta_ht_cap(struct ieee80211_sub_if_data *sdata, ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40 ? IEEE80211_STA_RX_BW_40 : IEEE80211_STA_RX_BW_20; + switch ((ht_cap.cap & IEEE80211_HT_CAP_SM_PS) + >> IEEE80211_HT_CAP_SM_PS_SHIFT) { + case WLAN_HT_CAP_SM_PS_INVALID: + case WLAN_HT_CAP_SM_PS_STATIC: + smps_mode = IEEE80211_SMPS_STATIC; + break; + case WLAN_HT_CAP_SM_PS_DYNAMIC: + smps_mode = IEEE80211_SMPS_DYNAMIC; + break; + case WLAN_HT_CAP_SM_PS_DISABLED: + smps_mode = IEEE80211_SMPS_OFF; + break; + } + + if (smps_mode != sta->sta.smps_mode) + changed = true; + sta->sta.smps_mode = smps_mode; + return changed; } diff --git a/net/mac80211/rc80211_minstrel_ht.c b/net/mac80211/rc80211_minstrel_ht.c index 6176c71..3af141c 100644 --- a/net/mac80211/rc80211_minstrel_ht.c +++ b/net/mac80211/rc80211_minstrel_ht.c @@ -808,7 +808,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, int ack_dur; int stbc; int i; - unsigned int smps; /* fall back to the old minstrel for legacy stations */ if (!sta->ht_cap.ht_supported) @@ -844,9 +843,6 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, if (sta_cap & IEEE80211_HT_CAP_LDPC_CODING) mi->tx_flags |= IEEE80211_TX_CTL_LDPC; - smps = (sta_cap & IEEE80211_HT_CAP_SM_PS) >> - IEEE80211_HT_CAP_SM_PS_SHIFT; - for (i = 0; i < ARRAY_SIZE(mi->groups); i++) { mi->groups[i].supported = 0; if (i == MINSTREL_CCK_GROUP) { @@ -869,7 +865,7 @@ minstrel_ht_update_caps(void *priv, struct ieee80211_supported_band *sband, continue; /* Mark MCS > 7 as unsupported if STA is in static SMPS mode */ - if (smps == WLAN_HT_CAP_SM_PS_STATIC && + if (sta->smps_mode == IEEE80211_SMPS_STATIC && minstrel_mcs_groups[i].streams > 1) continue; diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c index 296a4ae..3acb70b 100644 --- a/net/mac80211/rx.c +++ b/net/mac80211/rx.c @@ -2375,31 +2375,27 @@ ieee80211_rx_h_action(struct ieee80211_rx_data *rx) switch (mgmt->u.action.u.ht_smps.action) { case WLAN_HT_ACTION_SMPS: { struct ieee80211_supported_band *sband; - u8 smps; + enum ieee80211_smps_mode smps_mode; /* convert to HT capability */ switch (mgmt->u.action.u.ht_smps.smps_control) { case WLAN_HT_SMPS_CONTROL_DISABLED: - smps = WLAN_HT_CAP_SM_PS_DISABLED; + smps_mode = IEEE80211_SMPS_OFF; break; case WLAN_HT_SMPS_CONTROL_STATIC: - smps = WLAN_HT_CAP_SM_PS_STATIC; + smps_mode = IEEE80211_SMPS_STATIC; break; case WLAN_HT_SMPS_CONTROL_DYNAMIC: - smps = WLAN_HT_CAP_SM_PS_DYNAMIC; + smps_mode = IEEE80211_SMPS_DYNAMIC; break; default: goto invalid; } - smps <<= IEEE80211_HT_CAP_SM_PS_SHIFT; /* if no change do nothing */ - if ((rx->sta->sta.ht_cap.cap & - IEEE80211_HT_CAP_SM_PS) == smps) + if (rx->sta->sta.smps_mode == smps_mode) goto handled; - - rx->sta->sta.ht_cap.cap &= ~IEEE80211_HT_CAP_SM_PS; - rx->sta->sta.ht_cap.cap |= smps; + rx->sta->sta.smps_mode = smps_mode; sband = rx->local->hw.wiphy->bands[status->band]; diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 0794b90..a79ce82 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -375,6 +375,8 @@ struct sta_info *sta_info_alloc(struct ieee80211_sub_if_data *sdata, for (i = 0; i < IEEE80211_NUM_TIDS; i++) sta->last_seq_ctrl[i] = cpu_to_le16(USHRT_MAX); + sta->sta.smps_mode = IEEE80211_SMPS_OFF; + sta_dbg(sdata, "Allocated STA %pM\n", sta->sta.addr); return sta; -- cgit v0.10.2 From a50df0c4c0d97170a6c43573612acacc43e62fe7 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Feb 2013 14:20:05 +0100 Subject: cfg80211: advertise extended capabilities to userspace In many cases, userspace may need to know which of the 802.11 extended capabilities ("Extended Capabilities element") are implemented in the driver or device, to include them e.g. in beacons, assoc request/response or other frames. Add a new nl80211 attribute to hold the extended capabilities bitmap for this. Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 8a9200f..a229046 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -2480,6 +2480,14 @@ struct wiphy_wowlan_support { * * @max_acl_mac_addrs: Maximum number of MAC addresses that the device * supports for ACL. + * + * @extended_capabilities: extended capabilities supported by the driver, + * additional capabilities might be supported by userspace; these are + * the 802.11 extended capabilities ("Extended Capabilities element") + * and are in the same format as in the information element. See + * 802.11-2012 8.4.2.29 for the defined fields. + * @extended_capabilities_mask: mask of the valid values + * @extended_capabilities_len: length of the extended capabilities */ struct wiphy { /* assign these fields before you register the wiphy */ @@ -2546,6 +2554,9 @@ struct wiphy { */ u32 probe_resp_offload; + const u8 *extended_capabilities, *extended_capabilities_mask; + u8 extended_capabilities_len; + /* If multiple wiphys are registered and you're handed e.g. * a regular netdev with assigned ieee80211_ptr, you won't * know whether it points to a wiphy your driver has registered diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 3880f6a..1fd6e561 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1355,6 +1355,12 @@ enum nl80211_commands { * @NL80211_ATTR_RADAR_EVENT: Type of radar event for notification to userspace, * contains a value of enum nl80211_radar_event (u32). * + * @NL80211_ATTR_EXT_CAPA: 802.11 extended capabilities that the kernel driver + * has and handles. The format is the same as the IE contents. See + * 802.11-2012 8.4.2.29 for more information. + * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver + * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1635,6 +1641,9 @@ enum nl80211_attrs { NL80211_ATTR_RADAR_EVENT, + NL80211_ATTR_EXT_CAPA, + NL80211_ATTR_EXT_CAPA_MASK, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 7e40b9e..1237431 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -1363,6 +1363,15 @@ static int nl80211_send_wiphy(struct sk_buff *msg, u32 portid, u32 seq, int flag dev->wiphy.max_acl_mac_addrs)) goto nla_put_failure; + if (dev->wiphy.extended_capabilities && + (nla_put(msg, NL80211_ATTR_EXT_CAPA, + dev->wiphy.extended_capabilities_len, + dev->wiphy.extended_capabilities) || + nla_put(msg, NL80211_ATTR_EXT_CAPA_MASK, + dev->wiphy.extended_capabilities_len, + dev->wiphy.extended_capabilities_mask))) + goto nla_put_failure; + return genlmsg_end(msg, hdr); nla_put_failure: -- cgit v0.10.2 From c6f9d6c3bdeb337809d667ef2a41597229a1ce57 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Mon, 11 Feb 2013 14:27:08 +0100 Subject: mac80211: advertise operating mode notification capability Use the new extended capabilities advertising to advertise the fact that operating mode notification is supported. Signed-off-by: Johannes Berg diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index e085fcf..7e24fe0 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1776,6 +1776,8 @@ enum ieee80211_tdls_actioncode { #define WLAN_EXT_CAPA5_TDLS_ENABLED BIT(5) #define WLAN_EXT_CAPA5_TDLS_PROHIBITED BIT(6) +#define WLAN_EXT_CAPA8_OPMODE_NOTIF BIT(6) + /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 9cdbc77..035344b 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -501,6 +501,11 @@ static const struct ieee80211_ht_cap mac80211_ht_capa_mod_mask = { }, }; +static const u8 extended_capabilities[] = { + 0, 0, 0, 0, 0, 0, 0, + WLAN_EXT_CAPA8_OPMODE_NOTIF, +}; + struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, const struct ieee80211_ops *ops) { @@ -557,6 +562,10 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, WIPHY_FLAG_REPORTS_OBSS | WIPHY_FLAG_OFFCHAN_TX; + wiphy->extended_capabilities = extended_capabilities; + wiphy->extended_capabilities_mask = extended_capabilities; + wiphy->extended_capabilities_len = ARRAY_SIZE(extended_capabilities); + if (ops->remain_on_channel) wiphy->flags |= WIPHY_FLAG_HAS_REMAIN_ON_CHANNEL; -- cgit v0.10.2 From 9d62a98617298c1da288f50e84c5dd67732e79b7 Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 14 Feb 2013 21:10:13 +0200 Subject: cfg80211: Pass station (extended) capability info to kernel The information of the peer's capabilities and extended capabilities are required for the driver to perform TDLS Peer UAPSD operations and off channel operations. This information of the peer is passed from user space using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass the capability information of the peer to the driver. Similarly, there may be need for capability information for other modes, so allow this to be provided with both add_station and change_station. Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index a229046..fa26129 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -626,12 +626,14 @@ enum plink_actions { /** * enum station_parameters_apply_mask - station parameter values to apply * @STATION_PARAM_APPLY_UAPSD: apply new uAPSD parameters (uapsd_queues, max_sp) + * @STATION_PARAM_APPLY_CAPABILITY: apply new capability * * Not all station parameters have in-band "no change" signalling, * for those that don't these flags will are used. */ enum station_parameters_apply_mask { STATION_PARAM_APPLY_UAPSD = BIT(0), + STATION_PARAM_APPLY_CAPABILITY = BIT(1), }; /** @@ -662,6 +664,9 @@ enum station_parameters_apply_mask { * see &enum station_parameters_apply_mask * @local_pm: local link-specific mesh power save mode (no change when set * to unknown) + * @capability: station capability + * @ext_capab: extended capabilities of the station + * @ext_capab_len: number of extended capabilities */ struct station_parameters { u8 *supported_rates; @@ -678,6 +683,9 @@ struct station_parameters { u8 uapsd_queues; u8 max_sp; enum nl80211_mesh_power_mode local_pm; + u16 capability; + u8 *ext_capab; + u8 ext_capab_len; }; /** diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index 1fd6e561..f7c35ca 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1361,6 +1361,13 @@ enum nl80211_commands { * @NL80211_ATTR_EXT_CAPA_MASK: Extended capabilities that the kernel driver * has set in the %NL80211_ATTR_EXT_CAPA value, for multibit fields. * + * @NL80211_ATTR_STA_CAPABILITY: Station capabilities (u16) are advertised to + * the driver, e.g., to enable TDLS power save (PU-APSD). + * + * @NL80211_ATTR_STA_EXT_CAPABILITY: Station extended capabilities are + * advertised to the driver, e.g., to enable TDLS off channel operations + * and PU-APSD. + * * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ @@ -1644,6 +1651,9 @@ enum nl80211_attrs { NL80211_ATTR_EXT_CAPA, NL80211_ATTR_EXT_CAPA_MASK, + NL80211_ATTR_STA_CAPABILITY, + NL80211_ATTR_STA_EXT_CAPABILITY, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 1237431..be9f2b5 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -368,6 +368,8 @@ static const struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] = { [NL80211_ATTR_P2P_OPPPS] = { .type = NLA_U8 }, [NL80211_ATTR_ACL_POLICY] = {. type = NLA_U32 }, [NL80211_ATTR_MAC_ADDRS] = { .type = NLA_NESTED }, + [NL80211_ATTR_STA_CAPABILITY] = { .type = NLA_U16 }, + [NL80211_ATTR_STA_EXT_CAPABILITY] = { .type = NLA_BINARY, }, }; /* policy for the key attributes */ @@ -3435,6 +3437,19 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_SUPPORTED_RATES]); } + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) { + params.capability = + nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]); + params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY; + } + + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) { + params.ext_capab = + nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + params.ext_capab_len = + nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + } + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || info->attrs[NL80211_ATTR_HT_CAPABILITY]) return -EINVAL; @@ -3505,6 +3520,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) /* reject other things that can't change */ if (params.supported_rates) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) + return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) + return -EINVAL; /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); @@ -3537,6 +3556,10 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (params.supported_rates) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) + return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) + return -EINVAL; /* * No special handling for TDLS here -- the userspace * mesh code doesn't have this bug. @@ -3601,6 +3624,19 @@ static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) if (!params.aid || params.aid > IEEE80211_MAX_AID) return -EINVAL; + if (info->attrs[NL80211_ATTR_STA_CAPABILITY]) { + params.capability = + nla_get_u16(info->attrs[NL80211_ATTR_STA_CAPABILITY]); + params.sta_modify_mask |= STATION_PARAM_APPLY_CAPABILITY; + } + + if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) { + params.ext_capab = + nla_data(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + params.ext_capab_len = + nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); + } + if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) params.ht_capa = nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); -- cgit v0.10.2 From df881293c6ba9a12868491a717b25cb14ec1fa4a Mon Sep 17 00:00:00 2001 From: Jouni Malinen Date: Thu, 14 Feb 2013 21:10:54 +0200 Subject: cfg80211: Pass TDLS peer's QoS/HT/VHT information during set_station The information of the peer's capabilities is required for the driver to perform TDLS Peer UAPSD operations. This information of the peer is passed by the supplicant using NL80211_CMD_SET_STATION command. This commit enhances the function nl80211_set_station to pass this information of the peer to the driver in case this command is used with the TDLS peer STA. In addition, make the HT/VHT capability configuration handled more consistently for other STA cases (reject both instead of just HT). Signed-off-by: Jouni Malinen Signed-off-by: Johannes Berg diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 0800fb3..179dcbd 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1412,9 +1412,11 @@ static int ieee80211_change_station(struct wiphy *wiphy, return -ENOENT; } - /* in station mode, supported rates are only valid with TDLS */ + /* in station mode, some updates are only valid with TDLS */ if (sdata->vif.type == NL80211_IFTYPE_STATION && - params->supported_rates && + (params->supported_rates || params->ht_capa || params->vht_capa || + params->sta_modify_mask || + (params->sta_flags_mask & BIT(NL80211_STA_FLAG_WME))) && !test_sta_flag(sta, WLAN_STA_TDLS_PEER)) { mutex_unlock(&local->sta_mtx); return -EINVAL; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index be9f2b5..580ffea 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -3409,6 +3409,63 @@ static struct net_device *get_vlan(struct genl_info *info, return ERR_PTR(ret); } +static struct nla_policy +nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = { + [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 }, + [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 }, +}; + +static int nl80211_set_station_tdls(struct genl_info *info, + struct station_parameters *params) +{ + struct cfg80211_registered_device *rdev = info->user_ptr[0]; + struct nlattr *tb[NL80211_STA_WME_MAX + 1]; + struct nlattr *nla; + int err; + + /* Can only set if TDLS ... */ + if (!(rdev->wiphy.flags & WIPHY_FLAG_SUPPORTS_TDLS)) + return -EOPNOTSUPP; + + /* ... with external setup is supported */ + if (!(rdev->wiphy.flags & WIPHY_FLAG_TDLS_EXTERNAL_SETUP)) + return -EOPNOTSUPP; + + /* Dummy STA entry gets updated once the peer capabilities are known */ + if (info->attrs[NL80211_ATTR_HT_CAPABILITY]) + params->ht_capa = + nla_data(info->attrs[NL80211_ATTR_HT_CAPABILITY]); + if (info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + params->vht_capa = + nla_data(info->attrs[NL80211_ATTR_VHT_CAPABILITY]); + + /* parse WME attributes if present */ + if (!info->attrs[NL80211_ATTR_STA_WME]) + return 0; + + nla = info->attrs[NL80211_ATTR_STA_WME]; + err = nla_parse_nested(tb, NL80211_STA_WME_MAX, nla, + nl80211_sta_wme_policy); + if (err) + return err; + + if (tb[NL80211_STA_WME_UAPSD_QUEUES]) + params->uapsd_queues = nla_get_u8( + tb[NL80211_STA_WME_UAPSD_QUEUES]); + if (params->uapsd_queues & ~IEEE80211_WMM_IE_STA_QOSINFO_AC_MASK) + return -EINVAL; + + if (tb[NL80211_STA_WME_MAX_SP]) + params->max_sp = nla_get_u8(tb[NL80211_STA_WME_MAX_SP]); + + if (params->max_sp & ~IEEE80211_WMM_IE_STA_QOSINFO_SP_MASK) + return -EINVAL; + + params->sta_modify_mask |= STATION_PARAM_APPLY_UAPSD; + + return 0; +} + static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; @@ -3450,8 +3507,7 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) nla_len(info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]); } - if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL] || - info->attrs[NL80211_ATTR_HT_CAPABILITY]) + if (info->attrs[NL80211_ATTR_STA_LISTEN_INTERVAL]) return -EINVAL; if (!rdev->ops->change_station) @@ -3524,6 +3580,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* must be last in here for error handling */ params.vlan = get_vlan(info, rdev); @@ -3539,13 +3598,29 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) * to change the flag. */ params.sta_flags_mask &= ~BIT(NL80211_STA_FLAG_TDLS_PEER); - /* fall through */ + /* Include parameters for TDLS peer (driver will check) */ + err = nl80211_set_station_tdls(info, ¶ms); + if (err) + return err; + /* disallow things sta doesn't support */ + if (params.plink_action) + return -EINVAL; + if (params.local_pm) + return -EINVAL; + /* reject any changes other than AUTHORIZED or WME (for TDLS) */ + if (params.sta_flags_mask & ~(BIT(NL80211_STA_FLAG_AUTHORIZED) | + BIT(NL80211_STA_FLAG_WME))) + return -EINVAL; + break; case NL80211_IFTYPE_ADHOC: /* disallow things sta doesn't support */ if (params.plink_action) return -EINVAL; if (params.local_pm) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* reject any changes other than AUTHORIZED */ if (params.sta_flags_mask & ~BIT(NL80211_STA_FLAG_AUTHORIZED)) return -EINVAL; @@ -3560,6 +3635,9 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return -EINVAL; if (info->attrs[NL80211_ATTR_STA_EXT_CAPABILITY]) return -EINVAL; + if (info->attrs[NL80211_ATTR_HT_CAPABILITY] || + info->attrs[NL80211_ATTR_VHT_CAPABILITY]) + return -EINVAL; /* * No special handling for TDLS here -- the userspace * mesh code doesn't have this bug. @@ -3584,12 +3662,6 @@ static int nl80211_set_station(struct sk_buff *skb, struct genl_info *info) return err; } -static struct nla_policy -nl80211_sta_wme_policy[NL80211_STA_WME_MAX + 1] __read_mostly = { - [NL80211_STA_WME_UAPSD_QUEUES] = { .type = NLA_U8 }, - [NL80211_STA_WME_MAX_SP] = { .type = NLA_U8 }, -}; - static int nl80211_new_station(struct sk_buff *skb, struct genl_info *info) { struct cfg80211_registered_device *rdev = info->user_ptr[0]; -- cgit v0.10.2 From 932dd97c5fef091dd6f605fb1d40143d67d91e09 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 11:56:13 +0100 Subject: nl80211: renumber NL80211_FEATURE_FULL_AP_CLIENT_STATE Adding the flag to mac80211 already without testing was clearly a mistake, one that we now pay for by having to reserve bit 13 forever. The problem is cfg80211 doesn't allow capability/rate changes for station entries that were added unassociated, so the station entries cannot be set up properly when marked associated. Change the NL80211_FEATURE_FULL_AP_CLIENT_STATE value to make it clear to userspace implementations that all current kernels don't actually support it, even though the previous bit is set, and of course also remove the flag from mac80211 until we test and fix the issues. Signed-off-by: Johannes Berg diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index f7c35ca..c46bb01 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -3471,8 +3471,9 @@ enum nl80211_feature_flags { NL80211_FEATURE_NEED_OBSS_SCAN = 1 << 10, NL80211_FEATURE_P2P_GO_CTWIN = 1 << 11, NL80211_FEATURE_P2P_GO_OPPPS = 1 << 12, - NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 13, + /* bit 13 is reserved */ NL80211_FEATURE_ADVERTISE_CHAN_LIMITS = 1 << 14, + NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, }; /** diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 035344b..f974768 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -572,8 +572,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, wiphy->features |= NL80211_FEATURE_SK_TX_STATUS | NL80211_FEATURE_SAE | NL80211_FEATURE_HT_IBSS | - NL80211_FEATURE_VIF_TXPOWER | - NL80211_FEATURE_FULL_AP_CLIENT_STATE; + NL80211_FEATURE_VIF_TXPOWER; if (!ops->hw_scan) wiphy->features |= NL80211_FEATURE_LOW_PRIORITY_SCAN | -- cgit v0.10.2 From 586e01ededf9b713a1512dd658806791a7ca1a50 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Thu, 14 Feb 2013 12:13:53 +0100 Subject: mac80211: prevent spurious HT/VHT downgrade message Even when connecting to an AP that doesn't support VHT, and even when the local device doesn't support it either, the downgrade message gets printed. Suppress the message if HT and/or VHT is disabled. Signed-off-by: Johannes Berg diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 7a8cd78..9f6464f 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -357,6 +357,10 @@ ieee80211_determine_chantype(struct ieee80211_sub_if_data *sdata, ret = 0; out: + /* don't print the message below for VHT mismatch if VHT is disabled */ + if (ret & IEEE80211_STA_DISABLE_VHT) + vht_chandef = *chandef; + while (!cfg80211_chandef_usable(sdata->local->hw.wiphy, chandef, IEEE80211_CHAN_DISABLED)) { if (WARN_ON(chandef->width == NL80211_CHAN_WIDTH_20_NOHT)) { -- cgit v0.10.2 From 93c78c5debeb9c7101ecc73347d4730c26a98c05 Mon Sep 17 00:00:00 2001 From: Karl Beldan Date: Fri, 15 Feb 2013 00:03:14 +0100 Subject: mac80211_hwsim: ask mac80211 to reserve space for chanctx.drv_priv Otherwise memory corruption occurs when using channel contexts (ATM when param 'channel' > 1). Signed-off-by: Karl Beldan Signed-off-by: Johannes Berg diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index b73e497..cffdf4f 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -2247,6 +2247,7 @@ static int __init init_mac80211_hwsim(void) /* ask mac80211 to reserve space for magic */ hw->vif_data_size = sizeof(struct hwsim_vif_priv); hw->sta_data_size = sizeof(struct hwsim_sta_priv); + hw->chanctx_data_size = sizeof(struct hwsim_chanctx_priv); memcpy(data->channels_2ghz, hwsim_channels_2ghz, sizeof(hwsim_channels_2ghz)); -- cgit v0.10.2