From a21090cff296eb82b6de09304d64de466bdcaefc Mon Sep 17 00:00:00 2001
From: Stephen Hemminger <shemminger@vyatta.com>
Date: Wed, 7 Oct 2009 03:18:17 -0700
Subject: ipv4: arp_notify address list bug

This fixes a bug with arp_notify.

If arp_notify is enabled, kernel will crash if address is changed
and no IP address is assigned.
  http://bugzilla.kernel.org/show_bug.cgi?id=14330

Reported-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/ipv4/devinet.c b/net/ipv4/devinet.c
index e92f1fd..5df2f6a 100644
--- a/net/ipv4/devinet.c
+++ b/net/ipv4/devinet.c
@@ -1077,12 +1077,16 @@ static int inetdev_event(struct notifier_block *this, unsigned long event,
 		ip_mc_up(in_dev);
 		/* fall through */
 	case NETDEV_CHANGEADDR:
-		if (IN_DEV_ARP_NOTIFY(in_dev))
-			arp_send(ARPOP_REQUEST, ETH_P_ARP,
-				 in_dev->ifa_list->ifa_address,
-				 dev,
-				 in_dev->ifa_list->ifa_address,
-				 NULL, dev->dev_addr, NULL);
+		/* Send gratuitous ARP to notify of link change */
+		if (IN_DEV_ARP_NOTIFY(in_dev)) {
+			struct in_ifaddr *ifa = in_dev->ifa_list;
+
+			if (ifa)
+				arp_send(ARPOP_REQUEST, ETH_P_ARP,
+					 ifa->ifa_address, dev,
+					 ifa->ifa_address, NULL,
+					 dev->dev_addr, NULL);
+		}
 		break;
 	case NETDEV_DOWN:
 		ip_mc_down(in_dev);
-- 
cgit v0.10.2


From 083925d5432d910025e84d445d1243dd260d4afb Mon Sep 17 00:00:00 2001
From: "John W. Linville" <linville@tuxdriver.com>
Date: Tue, 6 Oct 2009 11:05:42 +0000
Subject: rndis_host: support ETHTOOL_GPERMADDR

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/usb/rndis_host.c b/drivers/net/usb/rndis_host.c
index d032bba..0caa800 100644
--- a/drivers/net/usb/rndis_host.c
+++ b/drivers/net/usb/rndis_host.c
@@ -418,6 +418,7 @@ generic_rndis_bind(struct usbnet *dev, struct usb_interface *intf, int flags)
 		goto halt_fail_and_release;
 	}
 	memcpy(net->dev_addr, bp, ETH_ALEN);
+	memcpy(net->perm_addr, bp, ETH_ALEN);
 
 	/* set a nonzero filter to enable data transfers */
 	memset(u.set, 0, sizeof *u.set);
-- 
cgit v0.10.2


From 24bb4fb6dac59f220f42fb375ba0e0f19365a227 Mon Sep 17 00:00:00 2001
From: Matt Carlson <mcarlson@broadcom.com>
Date: Mon, 5 Oct 2009 17:55:29 +0000
Subject: tg3: Fix phylib locking strategy

Felix Radensky noted that chip resets were generating stack trace dumps.
This is because the driver is attempting to acquire the mdio bus mutex
while holding the tp->lock spinlock.  The fix is to change the code such
that every phy access takes the tp->lock spinlock instead.

Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index f09bc5d..ba5d3fe 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -902,11 +902,12 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg)
 	struct tg3 *tp = bp->priv;
 	u32 val;
 
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
-		return -EAGAIN;
+	spin_lock_bh(&tp->lock);
 
 	if (tg3_readphy(tp, reg, &val))
-		return -EIO;
+		val = -EIO;
+
+	spin_unlock_bh(&tp->lock);
 
 	return val;
 }
@@ -914,14 +915,16 @@ static int tg3_mdio_read(struct mii_bus *bp, int mii_id, int reg)
 static int tg3_mdio_write(struct mii_bus *bp, int mii_id, int reg, u16 val)
 {
 	struct tg3 *tp = bp->priv;
+	u32 ret = 0;
 
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_PAUSED)
-		return -EAGAIN;
+	spin_lock_bh(&tp->lock);
 
 	if (tg3_writephy(tp, reg, val))
-		return -EIO;
+		ret = -EIO;
 
-	return 0;
+	spin_unlock_bh(&tp->lock);
+
+	return ret;
 }
 
 static int tg3_mdio_reset(struct mii_bus *bp)
@@ -1011,12 +1014,6 @@ static void tg3_mdio_config_5785(struct tg3 *tp)
 
 static void tg3_mdio_start(struct tg3 *tp)
 {
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
-		mutex_lock(&tp->mdio_bus->mdio_lock);
-		tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
-		mutex_unlock(&tp->mdio_bus->mdio_lock);
-	}
-
 	tp->mi_mode &= ~MAC_MI_MODE_AUTO_POLL;
 	tw32_f(MAC_MI_MODE, tp->mi_mode);
 	udelay(80);
@@ -1041,15 +1038,6 @@ static void tg3_mdio_start(struct tg3 *tp)
 		tg3_mdio_config_5785(tp);
 }
 
-static void tg3_mdio_stop(struct tg3 *tp)
-{
-	if (tp->tg3_flags3 & TG3_FLG3_MDIOBUS_INITED) {
-		mutex_lock(&tp->mdio_bus->mdio_lock);
-		tp->tg3_flags3 |= TG3_FLG3_MDIOBUS_PAUSED;
-		mutex_unlock(&tp->mdio_bus->mdio_lock);
-	}
-}
-
 static int tg3_mdio_init(struct tg3 *tp)
 {
 	int i;
@@ -1141,7 +1129,6 @@ static void tg3_mdio_fini(struct tg3 *tp)
 		tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_INITED;
 		mdiobus_unregister(tp->mdio_bus);
 		mdiobus_free(tp->mdio_bus);
-		tp->tg3_flags3 &= ~TG3_FLG3_MDIOBUS_PAUSED;
 	}
 }
 
@@ -1363,7 +1350,7 @@ static void tg3_adjust_link(struct net_device *dev)
 	struct tg3 *tp = netdev_priv(dev);
 	struct phy_device *phydev = tp->mdio_bus->phy_map[PHY_ADDR];
 
-	spin_lock(&tp->lock);
+	spin_lock_bh(&tp->lock);
 
 	mac_mode = tp->mac_mode & ~(MAC_MODE_PORT_MODE_MASK |
 				    MAC_MODE_HALF_DUPLEX);
@@ -1431,7 +1418,7 @@ static void tg3_adjust_link(struct net_device *dev)
 	tp->link_config.active_speed = phydev->speed;
 	tp->link_config.active_duplex = phydev->duplex;
 
-	spin_unlock(&tp->lock);
+	spin_unlock_bh(&tp->lock);
 
 	if (linkmesg)
 		tg3_link_report(tp);
@@ -6392,8 +6379,6 @@ static int tg3_chip_reset(struct tg3 *tp)
 
 	tg3_nvram_lock(tp);
 
-	tg3_mdio_stop(tp);
-
 	tg3_ape_lock(tp, TG3_APE_LOCK_GRC);
 
 	/* No matching tg3_nvram_unlock() after this because
@@ -8698,6 +8683,8 @@ static int tg3_close(struct net_device *dev)
 
 	del_timer_sync(&tp->timer);
 
+	tg3_phy_stop(tp);
+
 	tg3_full_lock(tp, 1);
 #if 0
 	tg3_dump_state(tp);
diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h
index 524691c..bab7940 100644
--- a/drivers/net/tg3.h
+++ b/drivers/net/tg3.h
@@ -2748,7 +2748,6 @@ struct tg3 {
 #define TG3_FLG3_5701_DMA_BUG		0x00000008
 #define TG3_FLG3_USE_PHYLIB		0x00000010
 #define TG3_FLG3_MDIOBUS_INITED		0x00000020
-#define TG3_FLG3_MDIOBUS_PAUSED		0x00000040
 #define TG3_FLG3_PHY_CONNECTED		0x00000080
 #define TG3_FLG3_RGMII_STD_IBND_DISABLE	0x00000100
 #define TG3_FLG3_RGMII_EXT_IBND_RX_EN	0x00000200
-- 
cgit v0.10.2


From 6e43650cee644b5d7957ecd50f1e41ff71f87734 Mon Sep 17 00:00:00 2001
From: Neil Horman <nhorman@tuxdriver.com>
Date: Mon, 5 Oct 2009 03:56:55 +0000
Subject: add maintainer for network drop monitor kernel service

I was getting ribbed about this earlier, so I figured I'd make it
official.  Add myself as the maintainer of the drop monitor bits, so
people don't just gripe at Dave when it breaks (I'm sure it will never
break, but just in case :) ).

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/MAINTAINERS b/MAINTAINERS
index e797c4d..4c5b920 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3619,6 +3619,13 @@ F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
+NETWORK DROP MONITOR
+M:	Neil Horman <nhorman@tuxdriver.com>
+L:	netdev@vger.kernel.org
+S:	Maintained
+W:	https://fedorahosted.org/dropwatch/
+F:	net/core/drop_monitor.c
+
 NETWORKING [GENERAL]
 M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
-- 
cgit v0.10.2


From 49682864b0270a0578b8321ed2686dc471ec37f1 Mon Sep 17 00:00:00 2001
From: Valentine Barshak <vbarshak@ru.mvista.com>
Date: Mon, 5 Oct 2009 03:27:56 +0000
Subject: pasemi_mac: ethtool get settings fix

Not all pasemi mac interfaces can have a phy attached.
For example, XAUI has no phy and phydev is NULL for it.
In this case ethtool get settings causes kernel crash.
Fix it by returning -EOPNOTSUPP if there's no PHY attached.

Signed-off-by: Valentine Barshak <vbarshak@ru.mvista.com>
Acked-by: Olof Johansson <olof@lixom.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/pasemi_mac_ethtool.c b/drivers/net/pasemi_mac_ethtool.c
index 064a4fe..28a8622 100644
--- a/drivers/net/pasemi_mac_ethtool.c
+++ b/drivers/net/pasemi_mac_ethtool.c
@@ -71,6 +71,9 @@ pasemi_mac_ethtool_get_settings(struct net_device *netdev,
 	struct pasemi_mac *mac = netdev_priv(netdev);
 	struct phy_device *phydev = mac->phydev;
 
+	if (!phydev)
+		return -EOPNOTSUPP;
+
 	return phy_ethtool_gset(phydev, cmd);
 }
 
-- 
cgit v0.10.2


From fa9859ef2bb56d876db53c258001af115f38a272 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 6 Oct 2009 19:34:39 +0000
Subject: netxen: Fix Unlikely(x) > y

The closing parenthesis was not on the right location.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Dhananjay Phadke <dhananjay@netxen.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index b5aa974..9b9eab1 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1714,7 +1714,7 @@ netxen_nic_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	/* 4 fragments per cmd des */
 	no_of_desc = (frag_count + 3) >> 2;
 
-	if (unlikely(no_of_desc + 2) > netxen_tx_avail(tx_ring)) {
+	if (unlikely(no_of_desc + 2 > netxen_tx_avail(tx_ring))) {
 		netif_stop_queue(netdev);
 		return NETDEV_TX_BUSY;
 	}
-- 
cgit v0.10.2


From 4989ccb25cc2a6d03d3503a2c852644f9a750948 Mon Sep 17 00:00:00 2001
From: roel kluin <roel.kluin@gmail.com>
Date: Tue, 6 Oct 2009 09:54:18 +0000
Subject: au1000_eth: Duplicate test of RX_OVERLEN bit in update_rx_stats()

in update_rx_stats() the RX_OVERLEN bit is set twice, replace it by RX_RUNT.
in au1000_rx() the RX_MISSED_FRAME bit was tested a few lines earlier already

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Manuel Lauss <manuel.lauss@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c
index fdf5937..04f63c7 100644
--- a/drivers/net/au1000_eth.c
+++ b/drivers/net/au1000_eth.c
@@ -721,7 +721,7 @@ static inline void update_rx_stats(struct net_device *dev, u32 status)
 		ps->rx_errors++;
 		if (status & RX_MISSED_FRAME)
 			ps->rx_missed_errors++;
-		if (status & (RX_OVERLEN | RX_OVERLEN | RX_LEN_ERROR))
+		if (status & (RX_OVERLEN | RX_RUNT | RX_LEN_ERROR))
 			ps->rx_length_errors++;
 		if (status & RX_CRC_ERROR)
 			ps->rx_crc_errors++;
@@ -794,8 +794,6 @@ static int au1000_rx(struct net_device *dev)
 					printk("rx len error\n");
 				if (status & RX_U_CNTRL_FRAME)
 					printk("rx u control frame\n");
-				if (status & RX_MISSED_FRAME)
-					printk("rx miss\n");
 			}
 		}
 		prxd->buff_stat = (u32)(pDB->dma_addr | RX_DMA_ENABLE);
-- 
cgit v0.10.2


From 639b62a5284fab27122ec607fe341eb8e29411f4 Mon Sep 17 00:00:00 2001
From: Thomas Chou <thomas@wytron.com.tw>
Date: Sun, 4 Oct 2009 23:33:17 +0000
Subject: ethoc: fix typo to compute number of tx descriptors

It should be max() instead of min(). Use 1/4 of available
descriptors for tx, and there should be at least 2 tx
descriptors.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index b7311bc..7475620 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -655,7 +655,7 @@ static int ethoc_open(struct net_device *dev)
 
 	/* calculate the number of TX/RX buffers */
 	num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ;
-	priv->num_tx = min(min_tx, num_bd / 4);
+	priv->num_tx = max(min_tx, num_bd / 4);
 	priv->num_rx = num_bd - priv->num_tx;
 	ethoc_write(priv, TX_BD_NUM, priv->num_tx);
 
-- 
cgit v0.10.2


From 3ee19a85bb428b8363699dff9e1c4041c107d46a Mon Sep 17 00:00:00 2001
From: Thomas Chou <thomas@wytron.com.tw>
Date: Sun, 4 Oct 2009 23:33:18 +0000
Subject: ethoc: fix buffer address mapping

The pointer address in buffer descriptors is physical address. The
pointer that processor used to access packet is virtual address.

Though the higher bits of pointer address used by the MAC may be
truncated to zero in special case, it is not always true in larger
designs.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 7475620..f92747f 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -284,7 +284,7 @@ static int ethoc_init_ring(struct ethoc *dev)
 	dev->cur_rx = 0;
 
 	/* setup transmission buffers */
-	bd.addr = 0;
+	bd.addr = virt_to_phys(dev->membase);
 	bd.stat = TX_BD_IRQ | TX_BD_CRC;
 
 	for (i = 0; i < dev->num_tx; i++) {
@@ -295,7 +295,6 @@ static int ethoc_init_ring(struct ethoc *dev)
 		bd.addr += ETHOC_BUFSIZ;
 	}
 
-	bd.addr = dev->num_tx * ETHOC_BUFSIZ;
 	bd.stat = RX_BD_EMPTY | RX_BD_IRQ;
 
 	for (i = 0; i < dev->num_rx; i++) {
@@ -401,7 +400,7 @@ static int ethoc_rx(struct net_device *dev, int limit)
 			int size = bd.stat >> 16;
 			struct sk_buff *skb = netdev_alloc_skb(dev, size);
 			if (likely(skb)) {
-				void *src = priv->membase + bd.addr;
+				void *src = phys_to_virt(bd.addr);
 				memcpy_fromio(skb_put(skb, size), src, size);
 				skb->protocol = eth_type_trans(skb, dev);
 				priv->stats.rx_packets++;
@@ -823,7 +822,7 @@ static netdev_tx_t ethoc_start_xmit(struct sk_buff *skb, struct net_device *dev)
 	else
 		bd.stat &= ~TX_BD_PAD;
 
-	dest = priv->membase + bd.addr;
+	dest = phys_to_virt(bd.addr);
 	memcpy_toio(dest, skb->data, skb->len);
 
 	bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK);
-- 
cgit v0.10.2


From 050f91dcd9a45a14449dded5180f633692b588d2 Mon Sep 17 00:00:00 2001
From: Thomas Chou <thomas@wytron.com.tw>
Date: Sun, 4 Oct 2009 23:33:19 +0000
Subject: ethoc: align received packet to make IP header at word boundary

The packet buffer is allocated at 4 bytes boundary, but the IP header
length and version bits is located at byte 14. These bit fields access
as 32 bits word and caused exception on processors that do not support
unaligned access.

The patch adds 2 bytes offset to make the bit fields word aligned.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index f92747f..0c6c7f4 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -399,6 +399,10 @@ static int ethoc_rx(struct net_device *dev, int limit)
 		if (ethoc_update_rx_stats(priv, &bd) == 0) {
 			int size = bd.stat >> 16;
 			struct sk_buff *skb = netdev_alloc_skb(dev, size);
+
+			size -= 4; /* strip the CRC */
+			skb_reserve(skb, 2); /* align TCP/IP header */
+
 			if (likely(skb)) {
 				void *src = phys_to_virt(bd.addr);
 				memcpy_fromio(skb_put(skb, size), src, size);
-- 
cgit v0.10.2


From 0baa080c75cea6357bfba9b93ba598d747457cbd Mon Sep 17 00:00:00 2001
From: Thomas Chou <thomas@wytron.com.tw>
Date: Sun, 4 Oct 2009 23:33:20 +0000
Subject: ethoc: use system memory as buffer

This patch enabled the ethoc to allocate system memory as buffer
when there is no dedicated buffer memory.

Some hardware designs may not have dedicated buffer memory such as
on chip or off chip SRAM. In this case, only one memory resource is
supplied in the platform data instead of two. Then a DMA buffer can
be allocated from system memory and used for the transfer.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 0c6c7f4..6d82dc6 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -19,6 +19,10 @@
 #include <linux/platform_device.h>
 #include <net/ethoc.h>
 
+static int buffer_size = 0x8000; /* 32 KBytes */
+module_param(buffer_size, int, 0);
+MODULE_PARM_DESC(buffer_size, "DMA buffer allocation size");
+
 /* register offsets */
 #define	MODER		0x00
 #define	INT_SOURCE	0x04
@@ -167,6 +171,7 @@
  * struct ethoc - driver-private device structure
  * @iobase:	pointer to I/O memory region
  * @membase:	pointer to buffer memory region
+ * @dma_alloc:	dma allocated buffer size
  * @num_tx:	number of send buffers
  * @cur_tx:	last send buffer written
  * @dty_tx:	last buffer actually sent
@@ -185,6 +190,7 @@
 struct ethoc {
 	void __iomem *iobase;
 	void __iomem *membase;
+	int dma_alloc;
 
 	unsigned int num_tx;
 	unsigned int cur_tx;
@@ -906,22 +912,19 @@ static int ethoc_probe(struct platform_device *pdev)
 
 	/* obtain buffer memory space */
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	if (!res) {
-		dev_err(&pdev->dev, "cannot obtain memory space\n");
-		ret = -ENXIO;
-		goto free;
-	}
-
-	mem = devm_request_mem_region(&pdev->dev, res->start,
+	if (res) {
+		mem = devm_request_mem_region(&pdev->dev, res->start,
 			res->end - res->start + 1, res->name);
-	if (!mem) {
-		dev_err(&pdev->dev, "cannot request memory space\n");
-		ret = -ENXIO;
-		goto free;
+		if (!mem) {
+			dev_err(&pdev->dev, "cannot request memory space\n");
+			ret = -ENXIO;
+			goto free;
+		}
+
+		netdev->mem_start = mem->start;
+		netdev->mem_end   = mem->end;
 	}
 
-	netdev->mem_start = mem->start;
-	netdev->mem_end   = mem->end;
 
 	/* obtain device IRQ number */
 	res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
@@ -936,6 +939,7 @@ static int ethoc_probe(struct platform_device *pdev)
 	/* setup driver-private data */
 	priv = netdev_priv(netdev);
 	priv->netdev = netdev;
+	priv->dma_alloc = 0;
 
 	priv->iobase = devm_ioremap_nocache(&pdev->dev, netdev->base_addr,
 			mmio->end - mmio->start + 1);
@@ -945,12 +949,27 @@ static int ethoc_probe(struct platform_device *pdev)
 		goto error;
 	}
 
-	priv->membase = devm_ioremap_nocache(&pdev->dev, netdev->mem_start,
-			mem->end - mem->start + 1);
-	if (!priv->membase) {
-		dev_err(&pdev->dev, "cannot remap memory space\n");
-		ret = -ENXIO;
-		goto error;
+	if (netdev->mem_end) {
+		priv->membase = devm_ioremap_nocache(&pdev->dev,
+			netdev->mem_start, mem->end - mem->start + 1);
+		if (!priv->membase) {
+			dev_err(&pdev->dev, "cannot remap memory space\n");
+			ret = -ENXIO;
+			goto error;
+		}
+	} else {
+		/* Allocate buffer memory */
+		priv->membase = dma_alloc_coherent(NULL,
+			buffer_size, (void *)&netdev->mem_start,
+			GFP_KERNEL);
+		if (!priv->membase) {
+			dev_err(&pdev->dev, "cannot allocate %dB buffer\n",
+				buffer_size);
+			ret = -ENOMEM;
+			goto error;
+		}
+		netdev->mem_end = netdev->mem_start + buffer_size;
+		priv->dma_alloc = buffer_size;
 	}
 
 	/* Allow the platform setup code to pass in a MAC address. */
@@ -1037,6 +1056,9 @@ free_mdio:
 	kfree(priv->mdio->irq);
 	mdiobus_free(priv->mdio);
 free:
+	if (priv->dma_alloc)
+		dma_free_coherent(NULL, priv->dma_alloc, priv->membase,
+			netdev->mem_start);
 	free_netdev(netdev);
 out:
 	return ret;
@@ -1062,7 +1084,9 @@ static int ethoc_remove(struct platform_device *pdev)
 			kfree(priv->mdio->irq);
 			mdiobus_free(priv->mdio);
 		}
-
+		if (priv->dma_alloc)
+			dma_free_coherent(NULL, priv->dma_alloc, priv->membase,
+				netdev->mem_start);
 		unregister_netdev(netdev);
 		free_netdev(netdev);
 	}
-- 
cgit v0.10.2


From a4d63a943735efa30270ce70716d43323fd40f02 Mon Sep 17 00:00:00 2001
From: Thomas Chou <thomas@wytron.com.tw>
Date: Tue, 6 Oct 2009 03:25:25 +0000
Subject: ethoc: limit the number of buffers to 128

Only 128 buffer descriptors are supported in the core. Limit the
number in case we have more memory.

Signed-off-by: Thomas Chou <thomas@wytron.com.tw>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ethoc.c b/drivers/net/ethoc.c
index 6d82dc6..34d0c69 100644
--- a/drivers/net/ethoc.c
+++ b/drivers/net/ethoc.c
@@ -662,8 +662,8 @@ static int ethoc_open(struct net_device *dev)
 	if (ret)
 		return ret;
 
-	/* calculate the number of TX/RX buffers */
-	num_bd = (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ;
+	/* calculate the number of TX/RX buffers, maximum 128 supported */
+	num_bd = min(128, (dev->mem_end - dev->mem_start + 1) / ETHOC_BUFSIZ);
 	priv->num_tx = max(min_tx, num_bd / 4);
 	priv->num_rx = num_bd - priv->num_tx;
 	ethoc_write(priv, TX_BD_NUM, priv->num_tx);
-- 
cgit v0.10.2


From 727c988593271599c9e5943699426afcce1a62d6 Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Thu, 1 Oct 2009 15:54:32 +0200
Subject: b43: Don't use struct wldev after detach.

Don't use struct wldev after detach. This fixes an oops on access.

Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/leds.c b/drivers/net/wireless/b43/leds.c
index fbe3d4f..1e8dba4 100644
--- a/drivers/net/wireless/b43/leds.c
+++ b/drivers/net/wireless/b43/leds.c
@@ -348,9 +348,9 @@ void b43_leds_register(struct b43_wldev *dev)
 	}
 }
 
-void b43_leds_unregister(struct b43_wldev *dev)
+void b43_leds_unregister(struct b43_wl *wl)
 {
-	struct b43_leds *leds = &dev->wl->leds;
+	struct b43_leds *leds = &wl->leds;
 
 	b43_unregister_led(&leds->led_tx);
 	b43_unregister_led(&leds->led_rx);
diff --git a/drivers/net/wireless/b43/leds.h b/drivers/net/wireless/b43/leds.h
index 9592e4c..4c56187 100644
--- a/drivers/net/wireless/b43/leds.h
+++ b/drivers/net/wireless/b43/leds.h
@@ -60,7 +60,7 @@ enum b43_led_behaviour {
 };
 
 void b43_leds_register(struct b43_wldev *dev);
-void b43_leds_unregister(struct b43_wldev *dev);
+void b43_leds_unregister(struct b43_wl *wl);
 void b43_leds_init(struct b43_wldev *dev);
 void b43_leds_exit(struct b43_wldev *dev);
 void b43_leds_stop(struct b43_wldev *dev);
@@ -76,7 +76,7 @@ struct b43_leds {
 static inline void b43_leds_register(struct b43_wldev *dev)
 {
 }
-static inline void b43_leds_unregister(struct b43_wldev *dev)
+static inline void b43_leds_unregister(struct b43_wl *wl)
 {
 }
 static inline void b43_leds_init(struct b43_wldev *dev)
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 9b907a3..130dcd5 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4997,7 +4997,7 @@ static void b43_remove(struct ssb_device *dev)
 
 	if (list_empty(&wl->devlist)) {
 		b43_rng_exit(wl);
-		b43_leds_unregister(wldev);
+		b43_leds_unregister(wl);
 		/* Last core on the chip unregistered.
 		 * We can destroy common struct b43_wl.
 		 */
-- 
cgit v0.10.2


From fbc44bf7177dfd61381da55405550b693943a432 Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Thu, 1 Oct 2009 22:06:29 +0200
Subject: mac80211: fix vlan and optimise RX

When receiving data frames, we can send them only to
the interface they belong to based on transmitting
station (this doesn't work for probe requests). Also,
don't try to handle other frames for AP_VLAN at all
since those interface should only receive data.

Additionally, the transmit side must check that the
station we're sending a frame to is actually on the
interface we're transmitting on, and not transmit
packets to functions that live on other interfaces,
so validate that as well.

Another bug fix is needed in sta_info.c where in the
VLAN case when adding/removing stations we overwrite
the sdata variable we still need.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/rx.c b/net/mac80211/rx.c
index c01588f..865fbc0 100644
--- a/net/mac80211/rx.c
+++ b/net/mac80211/rx.c
@@ -2164,11 +2164,17 @@ static void __ieee80211_rx_handle_packet(struct ieee80211_hw *hw,
 
 	skb = rx.skb;
 
-	list_for_each_entry_rcu(sdata, &local->interfaces, list) {
+	if (rx.sdata && ieee80211_is_data(hdr->frame_control)) {
+		rx.flags |= IEEE80211_RX_RA_MATCH;
+		prepares = prepare_for_handlers(rx.sdata, &rx, hdr);
+		if (prepares)
+			prev = rx.sdata;
+	} else list_for_each_entry_rcu(sdata, &local->interfaces, list) {
 		if (!netif_running(sdata->dev))
 			continue;
 
-		if (sdata->vif.type == NL80211_IFTYPE_MONITOR)
+		if (sdata->vif.type == NL80211_IFTYPE_MONITOR ||
+		    sdata->vif.type == NL80211_IFTYPE_AP_VLAN)
 			continue;
 
 		rx.flags |= IEEE80211_RX_RA_MATCH;
diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c
index eec0014..594f231 100644
--- a/net/mac80211/sta_info.c
+++ b/net/mac80211/sta_info.c
@@ -361,6 +361,7 @@ int sta_info_insert(struct sta_info *sta)
 					     u.ap);
 
 		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_ADD, &sta->sta);
+		sdata = sta->sdata;
 	}
 
 #ifdef CONFIG_MAC80211_VERBOSE_DEBUG
@@ -496,6 +497,7 @@ static void __sta_info_unlink(struct sta_info **sta)
 
 		drv_sta_notify(local, &sdata->vif, STA_NOTIFY_REMOVE,
 			       &(*sta)->sta);
+		sdata = (*sta)->sdata;
 	}
 
 	if (ieee80211_vif_is_mesh(&sdata->vif)) {
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index fd40282..db4bda6 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1704,7 +1704,8 @@ netdev_tx_t ieee80211_subif_start_xmit(struct sk_buff *skb,
 	if (!is_multicast_ether_addr(hdr.addr1)) {
 		rcu_read_lock();
 		sta = sta_info_get(local, hdr.addr1);
-		if (sta)
+		/* XXX: in the future, use sdata to look up the sta */
+		if (sta && sta->sdata == sdata)
 			sta_flags = get_sta_flags(sta);
 		rcu_read_unlock();
 	}
-- 
cgit v0.10.2


From 2facba769d7f9e563cf706de709074a2d20f1bba Mon Sep 17 00:00:00 2001
From: Jay Sternberg <jay.e.sternberg@intel.com>
Date: Fri, 2 Oct 2009 13:43:55 -0700
Subject: iwlwifi: incorrect method used for finding valid OTP blocks

The address stored in the next link address is a word address but when
reading the OTP blocks, a byte address is used. Also if the blocks are
full and the last link pointer is not zero, then none of the blocks are
valid so return an error.

The algorithm is simply valid blocks have a next address and that
address's contents is zero.

Using the wrong address for the next link address gets arbitrary data,
obviously. In cases seen, the first block is considered valid when it is not.

If the block has in fact been invalidated there may be old data or
there may be no data, bad data, or partial data, there is no way of
telling. Without this patch it is possible that a device with valid OTP data
is unable to work.

Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
CC: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.c b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
index 3d2b93a..e14c995 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.c
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.c
@@ -410,7 +410,6 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 					u16 *validblockaddr)
 {
 	u16 next_link_addr = 0, link_value = 0, valid_addr;
-	int ret = 0;
 	int usedblocks = 0;
 
 	/* set addressing mode to absolute to traverse the link list */
@@ -430,29 +429,29 @@ static int iwl_find_otp_image(struct iwl_priv *priv,
 		 * check for more block on the link list
 		 */
 		valid_addr = next_link_addr;
-		next_link_addr = link_value;
+		next_link_addr = link_value * sizeof(u16);
 		IWL_DEBUG_INFO(priv, "OTP blocks %d addr 0x%x\n",
 			       usedblocks, next_link_addr);
 		if (iwl_read_otp_word(priv, next_link_addr, &link_value))
 			return -EINVAL;
 		if (!link_value) {
 			/*
-			 * reach the end of link list,
+			 * reach the end of link list, return success and
 			 * set address point to the starting address
 			 * of the image
 			 */
-			goto done;
+			*validblockaddr = valid_addr;
+			/* skip first 2 bytes (link list pointer) */
+			*validblockaddr += 2;
+			return 0;
 		}
 		/* more in the link list, continue */
 		usedblocks++;
-	} while (usedblocks < priv->cfg->max_ll_items);
-	/* OTP full, use last block */
-	IWL_DEBUG_INFO(priv, "OTP is full, use last block\n");
-done:
-	*validblockaddr = valid_addr;
-	/* skip first 2 bytes (link list pointer) */
-	*validblockaddr += 2;
-	return ret;
+	} while (usedblocks <= priv->cfg->max_ll_items);
+
+	/* OTP has no valid blocks */
+	IWL_DEBUG_INFO(priv, "OTP has no valid blocks\n");
+	return -EINVAL;
 }
 
 /**
-- 
cgit v0.10.2


From 722d9b1e1e52be46582fa8b01a082a7f79fb464d Mon Sep 17 00:00:00 2001
From: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Date: Fri, 2 Oct 2009 13:43:56 -0700
Subject: iwlwifi: fix EEPROM enhance tx power offset

Set the correct EEPROM offset for enhance tx power for 6000 series

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-eeprom.h b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
index 6b68db7..80b9e45 100644
--- a/drivers/net/wireless/iwlwifi/iwl-eeprom.h
+++ b/drivers/net/wireless/iwlwifi/iwl-eeprom.h
@@ -220,35 +220,35 @@ struct iwl_eeprom_enhanced_txpwr {
  * Section 10: 2.4 GHz 40MHz channels: 132, 44 (_above_)
  */
 /* 2.4 GHz band: CCK */
-#define EEPROM_LB_CCK_20_COMMON       ((0xAA)\
+#define EEPROM_LB_CCK_20_COMMON       ((0xA8)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 8 bytes */
 /* 2.4 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_LB_OFDM_COMMON       ((0xB2)\
+#define EEPROM_LB_OFDM_COMMON       ((0xB0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
 /* 5.2 GHz band: 20MHz-Legacy, 20MHz-HT, 40MHz-HT */
-#define EEPROM_HB_OFDM_COMMON       ((0xCA)\
+#define EEPROM_HB_OFDM_COMMON       ((0xC8)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
 /* 2.4GHz band channels:
  *	1Legacy, 1HT, 2Legacy, 2HT, 10Legacy, 10HT, 11Legacy, 11HT */
-#define EEPROM_LB_OFDM_20_BAND       ((0xE2)\
+#define EEPROM_LB_OFDM_20_BAND       ((0xE0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 64 bytes */
 /* 2.4 GHz band HT40 channels: (1,+1) (2,+1) (6,+1) (7,+1) (9,+1) */
-#define EEPROM_LB_OFDM_HT40_BAND       ((0x122)\
+#define EEPROM_LB_OFDM_HT40_BAND       ((0x120)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 40 bytes */
 /* 5.2GHz band channels: 36Legacy, 36HT, 64Legacy, 64HT, 100Legacy, 100HT */
-#define EEPROM_HB_OFDM_20_BAND       ((0x14A)\
+#define EEPROM_HB_OFDM_20_BAND       ((0x148)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 48 bytes */
 /* 5.2 GHz band HT40 channels: (36,+1) (60,+1) (100,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND       ((0x17A)\
+#define EEPROM_HB_OFDM_HT40_BAND       ((0x178)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 24 bytes */
 /* 2.4 GHz band, channnel 13: Legacy, HT */
-#define EEPROM_LB_OFDM_20_CHANNEL_13       ((0x192)\
+#define EEPROM_LB_OFDM_20_CHANNEL_13       ((0x190)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
 /* 5.2 GHz band, channnel 140: Legacy, HT */
-#define EEPROM_HB_OFDM_20_CHANNEL_140       ((0x1A2)\
+#define EEPROM_HB_OFDM_20_CHANNEL_140       ((0x1A0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
 /* 5.2 GHz band, HT40 channnels (132,+1) (44,+1) */
-#define EEPROM_HB_OFDM_HT40_BAND_1       ((0x1B2)\
+#define EEPROM_HB_OFDM_HT40_BAND_1       ((0x1B0)\
 		| INDIRECT_ADDRESS | INDIRECT_REGULATORY)   /* 16 bytes */
 
 
-- 
cgit v0.10.2


From 9024adf5c81c94f7b5c6fd26942b075e2a26e085 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 2 Oct 2009 13:43:57 -0700
Subject: iwlwifi: fix compile warning
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

Fixes following on big endian systems:
  CC [M]  drivers/net/wireless/iwlwifi/iwl-rx.o
  drivers/net/wireless/iwlwifi/iwl-rx.c: In function ‘iwl_rx_reply_rx’:
  drivers/net/wireless/iwlwifi/iwl-rx.c:1029: warning: integer overflow in
  expression

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reported-by: Marcel Holtmann <marcel@holtmann.org>
Tested-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945.c b/drivers/net/wireless/iwlwifi/iwl-3945.c
index e70c5b0..231c833 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945.c
@@ -610,7 +610,7 @@ static void iwl3945_rx_reply_rx(struct iwl_priv *priv,
 	if (rx_status.band == IEEE80211_BAND_5GHZ)
 		rx_status.rate_idx -= IWL_FIRST_OFDM_RATE;
 
-	rx_status.antenna = le16_to_cpu(rx_hdr->phy_flags &
+	rx_status.antenna = (le16_to_cpu(rx_hdr->phy_flags) &
 					RX_RES_PHY_FLAGS_ANTENNA_MSK) >> 4;
 
 	/* set the preamble flag if appropriate */
diff --git a/drivers/net/wireless/iwlwifi/iwl-commands.h b/drivers/net/wireless/iwlwifi/iwl-commands.h
index 2c5c88f..4afaf77 100644
--- a/drivers/net/wireless/iwlwifi/iwl-commands.h
+++ b/drivers/net/wireless/iwlwifi/iwl-commands.h
@@ -1154,7 +1154,7 @@ struct iwl_wep_cmd {
 #define RX_RES_PHY_FLAGS_MOD_CCK_MSK		cpu_to_le16(1 << 1)
 #define RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK	cpu_to_le16(1 << 2)
 #define RX_RES_PHY_FLAGS_NARROW_BAND_MSK	cpu_to_le16(1 << 3)
-#define RX_RES_PHY_FLAGS_ANTENNA_MSK		cpu_to_le16(0xf0)
+#define RX_RES_PHY_FLAGS_ANTENNA_MSK		0xf0
 #define RX_RES_PHY_FLAGS_ANTENNA_POS		4
 
 #define RX_RES_STATUS_SEC_TYPE_MSK	(0x7 << 8)
diff --git a/drivers/net/wireless/iwlwifi/iwl-rx.c b/drivers/net/wireless/iwlwifi/iwl-rx.c
index 8e1bb53..493626b 100644
--- a/drivers/net/wireless/iwlwifi/iwl-rx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-rx.c
@@ -1044,7 +1044,7 @@ void iwl_rx_reply_rx(struct iwl_priv *priv,
 	 * as a bitmask.
 	 */
 	rx_status.antenna =
-		le16_to_cpu(phy_res->phy_flags & RX_RES_PHY_FLAGS_ANTENNA_MSK)
+		(le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK)
 		>> RX_RES_PHY_FLAGS_ANTENNA_POS;
 
 	/* set the preamble flag if appropriate */
-- 
cgit v0.10.2


From 886e71de1f889adadb1065b1a83b0e64625fb716 Mon Sep 17 00:00:00 2001
From: Reinette Chatre <reinette.chatre@intel.com>
Date: Fri, 2 Oct 2009 13:44:07 -0700
Subject: iwlagn: fix compile warning in iwl5000_gain_computation
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

The return type of abs() was recently changed from int to long. With
min()'s type checking we thus need to make sure that values of the same
type are compared.

This fixes:

    CC [M]  drivers/net/wireless/iwlwifi/iwl-5000.o
drivers/net/wireless/iwlwifi/iwl-5000.c: In function ‘iwl5000_gain_computation’:
drivers/net/wireless/iwlwifi/iwl-5000.c:320: warning: comparison of distinct pointer types lacks a cast

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Reported-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-5000.c b/drivers/net/wireless/iwlwifi/iwl-5000.c
index eb08f44..524e7e4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-5000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-5000.c
@@ -317,7 +317,7 @@ static void iwl5000_gain_computation(struct iwl_priv *priv,
 			(s32)average_noise[i])) / 1500;
 		/* bound gain by 2 bits value max, 3rd bit is sign */
 		data->delta_gain_code[i] =
-			min(abs(delta_g), CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
+			min(abs(delta_g), (long) CHAIN_NOISE_MAX_DELTA_GAIN_CODE);
 
 		if (delta_g < 0)
 			/* set negative sign */
-- 
cgit v0.10.2


From 49d965c8f7fcbf06da373468e091eb7d205f0bec Mon Sep 17 00:00:00 2001
From: Michael Buesch <mb@bu3sch.de>
Date: Sat, 3 Oct 2009 00:57:58 +0200
Subject: b43: Protect sanity check against physical device removal

Fix IRQ mask sanity check for physically pulled device.

Tested-by: Andrew Price <andy@andrewprice.me.uk>
Signed-off-by: Michael Buesch <mb@bu3sch.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 130dcd5..86f3582 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -3874,6 +3874,7 @@ static struct b43_wldev * b43_wireless_core_stop(struct b43_wldev *dev)
 {
 	struct b43_wl *wl = dev->wl;
 	struct b43_wldev *orig_dev;
+	u32 mask;
 
 redo:
 	if (!dev || b43_status(dev) < B43_STAT_STARTED)
@@ -3920,7 +3921,8 @@ redo:
 			goto redo;
 		return dev;
 	}
-	B43_WARN_ON(b43_read32(dev, B43_MMIO_GEN_IRQ_MASK));
+	mask = b43_read32(dev, B43_MMIO_GEN_IRQ_MASK);
+	B43_WARN_ON(mask != 0xFFFFFFFF && mask);
 
 	/* Drain the TX queue */
 	while (skb_queue_len(&wl->tx_queue))
-- 
cgit v0.10.2


From 0358bc293e4aceac51e0e09837830898e90d2552 Mon Sep 17 00:00:00 2001
From: Bjorn Helgaas <bjorn.helgaas@hp.com>
Date: Mon, 5 Oct 2009 11:37:01 -0600
Subject: iwlwifi: use %pM for formatted MAC addresses

User-visible messages should use formatted MAC addresses ("00:01:...")
rather than raw ("0001...") so they match other parts of the system.

Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com>
CC: ilw@linux.intel.com
CC: linux-wireless@vger.kernel.org
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
index a16bd41..cbb0585 100644
--- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
+++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c
@@ -702,7 +702,7 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta,
 		u8 sta_id = iwl_find_station(priv, hdr->addr1);
 
 		if (sta_id == IWL_INVALID_STATION) {
-			IWL_DEBUG_RATE(priv, "LQ: ADD station %pm\n",
+			IWL_DEBUG_RATE(priv, "LQ: ADD station %pM\n",
 				       hdr->addr1);
 			sta_id = iwl_add_station(priv, hdr->addr1, false,
 				CMD_ASYNC, NULL);
-- 
cgit v0.10.2


From 9e7ba2465fd453429aa5849c2aadb526cda19034 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 6 Oct 2009 14:33:14 +0200
Subject: mac80211: fix ADM8211_SYNCTL_RFtype define

A logical of shifts to the left doesn't make sense.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/adm8211.h b/drivers/net/wireless/adm8211.h
index 4f6ab13..b07e4d3 100644
--- a/drivers/net/wireless/adm8211.h
+++ b/drivers/net/wireless/adm8211.h
@@ -266,7 +266,7 @@ do {								\
 #define ADM8211_SYNCTL_CS1	(1 << 28)
 #define ADM8211_SYNCTL_CAL	(1 << 27)
 #define ADM8211_SYNCTL_SELCAL	(1 << 26)
-#define ADM8211_SYNCTL_RFtype	((1 << 24) || (1 << 23) || (1 << 22))
+#define ADM8211_SYNCTL_RFtype	((1 << 24) | (1 << 23) | (1 << 22))
 #define ADM8211_SYNCTL_RFMD	(1 << 22)
 #define ADM8211_SYNCTL_GENERAL	(0x7 << 22)
 /* SYNCTL 21:0 Data (Si4126: 18-bit data, 4-bit address) */
-- 
cgit v0.10.2


From 0819663d164e090de315c5e619f4e23c27aaff88 Mon Sep 17 00:00:00 2001
From: Roel Kluin <roel.kluin@gmail.com>
Date: Tue, 6 Oct 2009 15:52:35 +0200
Subject: mac80211: use kfree_skb() to free struct sk_buff pointers

kfree_skb() should be used to free struct sk_buff pointers.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Cc: stable@kernel.org
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/mac80211/util.c b/net/mac80211/util.c
index dd65643..aeb65b3 100644
--- a/net/mac80211/util.c
+++ b/net/mac80211/util.c
@@ -339,7 +339,7 @@ void ieee80211_add_pending_skb(struct ieee80211_local *local,
 	struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 	if (WARN_ON(!info->control.vif)) {
-		kfree(skb);
+		kfree_skb(skb);
 		return;
 	}
 
@@ -367,7 +367,7 @@ int ieee80211_add_pending_skbs(struct ieee80211_local *local,
 		struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
 
 		if (WARN_ON(!info->control.vif)) {
-			kfree(skb);
+			kfree_skb(skb);
 			continue;
 		}
 
-- 
cgit v0.10.2


From f5b4da21ba293220001b5fd36be75c859b18afc1 Mon Sep 17 00:00:00 2001
From: Larry Finger <Larry.Finger@lwfinger.net>
Date: Fri, 2 Oct 2009 12:54:34 -0500
Subject: b43: Fix PPC crash in rfkill polling on unload

In Bugzilla No. 14181, a PowerMac G4 crashes on ifdown or
module unload because the rfkill polling has not been stopped.
For the x86 architectures, the attempt to reach a now unmapped
register is not fatal as it is on PPC.

(Includes "b43: Fix locking problem when stopping rfkill polling". -- JWL)

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 86f3582..df6b26a 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4501,6 +4501,7 @@ static void b43_op_stop(struct ieee80211_hw *hw)
 
 	cancel_work_sync(&(wl->beacon_update_trigger));
 
+	wiphy_rfkill_stop_polling(hw->wiphy);
 	mutex_lock(&wl->mutex);
 	if (b43_status(dev) >= B43_STAT_STARTED) {
 		dev = b43_wireless_core_stop(dev);
-- 
cgit v0.10.2


From 7e937c633f718e0916a294db7282c922c1bf3ce3 Mon Sep 17 00:00:00 2001
From: Albert Herranz <albert_herranz@yahoo.es>
Date: Wed, 7 Oct 2009 00:07:44 +0200
Subject: b43: do not stack-allocate pio rx/tx header and tail buffers

The DMA-API debugging facility complains about b43 mapping memory from
stack for SDIO-based cards.

Indeed, b43 currently allocates the PIO RX/TX header and tail buffers
from stack. The solution here is to use heap-allocated buffers instead.

Signed-off-by: Albert Herranz <albert_herranz@yahoo.es>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
index fa1549a..6607162 100644
--- a/drivers/net/wireless/b43/b43.h
+++ b/drivers/net/wireless/b43/b43.h
@@ -607,82 +607,7 @@ struct b43_qos_params {
 	struct ieee80211_tx_queue_params p;
 };
 
-struct b43_wldev;
-
-/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
-struct b43_wl {
-	/* Pointer to the active wireless device on this chip */
-	struct b43_wldev *current_dev;
-	/* Pointer to the ieee80211 hardware data structure */
-	struct ieee80211_hw *hw;
-
-	/* Global driver mutex. Every operation must run with this mutex locked. */
-	struct mutex mutex;
-	/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
-	 * handler, only. This basically is just the IRQ mask register. */
-	spinlock_t hardirq_lock;
-
-	/* The number of queues that were registered with the mac80211 subsystem
-	 * initially. This is a backup copy of hw->queues in case hw->queues has
-	 * to be dynamically lowered at runtime (Firmware does not support QoS).
-	 * hw->queues has to be restored to the original value before unregistering
-	 * from the mac80211 subsystem. */
-	u16 mac80211_initially_registered_queues;
-
-	/* We can only have one operating interface (802.11 core)
-	 * at a time. General information about this interface follows.
-	 */
-
-	struct ieee80211_vif *vif;
-	/* The MAC address of the operating interface. */
-	u8 mac_addr[ETH_ALEN];
-	/* Current BSSID */
-	u8 bssid[ETH_ALEN];
-	/* Interface type. (NL80211_IFTYPE_XXX) */
-	int if_type;
-	/* Is the card operating in AP, STA or IBSS mode? */
-	bool operating;
-	/* filter flags */
-	unsigned int filter_flags;
-	/* Stats about the wireless interface */
-	struct ieee80211_low_level_stats ieee_stats;
-
-#ifdef CONFIG_B43_HWRNG
-	struct hwrng rng;
-	bool rng_initialized;
-	char rng_name[30 + 1];
-#endif /* CONFIG_B43_HWRNG */
-
-	/* List of all wireless devices on this chip */
-	struct list_head devlist;
-	u8 nr_devs;
-
-	bool radiotap_enabled;
-	bool radio_enabled;
-
-	/* The beacon we are currently using (AP or IBSS mode). */
-	struct sk_buff *current_beacon;
-	bool beacon0_uploaded;
-	bool beacon1_uploaded;
-	bool beacon_templates_virgin; /* Never wrote the templates? */
-	struct work_struct beacon_update_trigger;
-
-	/* The current QOS parameters for the 4 queues. */
-	struct b43_qos_params qos_params[4];
-
-	/* Work for adjustment of the transmission power.
-	 * This is scheduled when we determine that the actual TX output
-	 * power doesn't match what we want. */
-	struct work_struct txpower_adjust_work;
-
-	/* Packet transmit work */
-	struct work_struct tx_work;
-	/* Queue of packets to be transmitted. */
-	struct sk_buff_head tx_queue;
-
-	/* The device LEDs. */
-	struct b43_leds leds;
-};
+struct b43_wl;
 
 /* The type of the firmware file. */
 enum b43_firmware_file_type {
@@ -824,6 +749,97 @@ struct b43_wldev {
 #endif
 };
 
+/*
+ * Include goes here to avoid a dependency problem.
+ * A better fix would be to integrate xmit.h into b43.h.
+ */
+#include "xmit.h"
+
+/* Data structure for the WLAN parts (802.11 cores) of the b43 chip. */
+struct b43_wl {
+	/* Pointer to the active wireless device on this chip */
+	struct b43_wldev *current_dev;
+	/* Pointer to the ieee80211 hardware data structure */
+	struct ieee80211_hw *hw;
+
+	/* Global driver mutex. Every operation must run with this mutex locked. */
+	struct mutex mutex;
+	/* Hard-IRQ spinlock. This lock protects things used in the hard-IRQ
+	 * handler, only. This basically is just the IRQ mask register. */
+	spinlock_t hardirq_lock;
+
+	/* The number of queues that were registered with the mac80211 subsystem
+	 * initially. This is a backup copy of hw->queues in case hw->queues has
+	 * to be dynamically lowered at runtime (Firmware does not support QoS).
+	 * hw->queues has to be restored to the original value before unregistering
+	 * from the mac80211 subsystem. */
+	u16 mac80211_initially_registered_queues;
+
+	/* We can only have one operating interface (802.11 core)
+	 * at a time. General information about this interface follows.
+	 */
+
+	struct ieee80211_vif *vif;
+	/* The MAC address of the operating interface. */
+	u8 mac_addr[ETH_ALEN];
+	/* Current BSSID */
+	u8 bssid[ETH_ALEN];
+	/* Interface type. (NL80211_IFTYPE_XXX) */
+	int if_type;
+	/* Is the card operating in AP, STA or IBSS mode? */
+	bool operating;
+	/* filter flags */
+	unsigned int filter_flags;
+	/* Stats about the wireless interface */
+	struct ieee80211_low_level_stats ieee_stats;
+
+#ifdef CONFIG_B43_HWRNG
+	struct hwrng rng;
+	bool rng_initialized;
+	char rng_name[30 + 1];
+#endif /* CONFIG_B43_HWRNG */
+
+	/* List of all wireless devices on this chip */
+	struct list_head devlist;
+	u8 nr_devs;
+
+	bool radiotap_enabled;
+	bool radio_enabled;
+
+	/* The beacon we are currently using (AP or IBSS mode). */
+	struct sk_buff *current_beacon;
+	bool beacon0_uploaded;
+	bool beacon1_uploaded;
+	bool beacon_templates_virgin; /* Never wrote the templates? */
+	struct work_struct beacon_update_trigger;
+
+	/* The current QOS parameters for the 4 queues. */
+	struct b43_qos_params qos_params[4];
+
+	/* Work for adjustment of the transmission power.
+	 * This is scheduled when we determine that the actual TX output
+	 * power doesn't match what we want. */
+	struct work_struct txpower_adjust_work;
+
+	/* Packet transmit work */
+	struct work_struct tx_work;
+	/* Queue of packets to be transmitted. */
+	struct sk_buff_head tx_queue;
+
+	/* The device LEDs. */
+	struct b43_leds leds;
+
+#ifdef CONFIG_B43_PIO
+	/*
+	 * RX/TX header/tail buffers used by the frame transmit functions.
+	 */
+	struct b43_rxhdr_fw4 rxhdr;
+	struct b43_txhdr txhdr;
+	u8 rx_tail[4];
+	u8 tx_tail[4];
+#endif /* CONFIG_B43_PIO */
+};
+
 static inline struct b43_wl *hw_to_b43_wl(struct ieee80211_hw *hw)
 {
 	return hw->priv;
diff --git a/drivers/net/wireless/b43/pio.c b/drivers/net/wireless/b43/pio.c
index 9c13979..dbbf0d1 100644
--- a/drivers/net/wireless/b43/pio.c
+++ b/drivers/net/wireless/b43/pio.c
@@ -331,6 +331,7 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q,
 				unsigned int data_len)
 {
 	struct b43_wldev *dev = q->dev;
+	struct b43_wl *wl = dev->wl;
 	const u8 *data = _data;
 
 	ctl |= B43_PIO_TXCTL_WRITELO | B43_PIO_TXCTL_WRITEHI;
@@ -340,13 +341,12 @@ static u16 tx_write_2byte_queue(struct b43_pio_txqueue *q,
 			q->mmio_base + B43_PIO_TXDATA,
 			sizeof(u16));
 	if (data_len & 1) {
-		u8 tail[2] = { 0, };
-
 		/* Write the last byte. */
 		ctl &= ~B43_PIO_TXCTL_WRITEHI;
 		b43_piotx_write16(q, B43_PIO_TXCTL, ctl);
-		tail[0] = data[data_len - 1];
-		ssb_block_write(dev->dev, tail, 2,
+		wl->tx_tail[0] = data[data_len - 1];
+		wl->tx_tail[1] = 0;
+		ssb_block_write(dev->dev, wl->tx_tail, 2,
 				q->mmio_base + B43_PIO_TXDATA,
 				sizeof(u16));
 	}
@@ -381,6 +381,7 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q,
 				unsigned int data_len)
 {
 	struct b43_wldev *dev = q->dev;
+	struct b43_wl *wl = dev->wl;
 	const u8 *data = _data;
 
 	ctl |= B43_PIO8_TXCTL_0_7 | B43_PIO8_TXCTL_8_15 |
@@ -391,29 +392,31 @@ static u32 tx_write_4byte_queue(struct b43_pio_txqueue *q,
 			q->mmio_base + B43_PIO8_TXDATA,
 			sizeof(u32));
 	if (data_len & 3) {
-		u8 tail[4] = { 0, };
-
+		wl->tx_tail[3] = 0;
 		/* Write the last few bytes. */
 		ctl &= ~(B43_PIO8_TXCTL_8_15 | B43_PIO8_TXCTL_16_23 |
 			 B43_PIO8_TXCTL_24_31);
 		switch (data_len & 3) {
 		case 3:
 			ctl |= B43_PIO8_TXCTL_16_23 | B43_PIO8_TXCTL_8_15;
-			tail[0] = data[data_len - 3];
-			tail[1] = data[data_len - 2];
-			tail[2] = data[data_len - 1];
+			wl->tx_tail[0] = data[data_len - 3];
+			wl->tx_tail[1] = data[data_len - 2];
+			wl->tx_tail[2] = data[data_len - 1];
 			break;
 		case 2:
 			ctl |= B43_PIO8_TXCTL_8_15;
-			tail[0] = data[data_len - 2];
-			tail[1] = data[data_len - 1];
+			wl->tx_tail[0] = data[data_len - 2];
+			wl->tx_tail[1] = data[data_len - 1];
+			wl->tx_tail[2] = 0;
 			break;
 		case 1:
-			tail[0] = data[data_len - 1];
+			wl->tx_tail[0] = data[data_len - 1];
+			wl->tx_tail[1] = 0;
+			wl->tx_tail[2] = 0;
 			break;
 		}
 		b43_piotx_write32(q, B43_PIO8_TXCTL, ctl);
-		ssb_block_write(dev->dev, tail, 4,
+		ssb_block_write(dev->dev, wl->tx_tail, 4,
 				q->mmio_base + B43_PIO8_TXDATA,
 				sizeof(u32));
 	}
@@ -445,8 +448,9 @@ static void pio_tx_frame_4byte_queue(struct b43_pio_txpacket *pack,
 static int pio_tx_frame(struct b43_pio_txqueue *q,
 			struct sk_buff *skb)
 {
+	struct b43_wldev *dev = q->dev;
+	struct b43_wl *wl = dev->wl;
 	struct b43_pio_txpacket *pack;
-	struct b43_txhdr txhdr;
 	u16 cookie;
 	int err;
 	unsigned int hdrlen;
@@ -457,8 +461,8 @@ static int pio_tx_frame(struct b43_pio_txqueue *q,
 			  struct b43_pio_txpacket, list);
 
 	cookie = generate_cookie(q, pack);
-	hdrlen = b43_txhdr_size(q->dev);
-	err = b43_generate_txhdr(q->dev, (u8 *)&txhdr, skb,
+	hdrlen = b43_txhdr_size(dev);
+	err = b43_generate_txhdr(dev, (u8 *)&wl->txhdr, skb,
 				 info, cookie);
 	if (err)
 		return err;
@@ -466,15 +470,15 @@ static int pio_tx_frame(struct b43_pio_txqueue *q,
 	if (info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM) {
 		/* Tell the firmware about the cookie of the last
 		 * mcast frame, so it can clear the more-data bit in it. */
-		b43_shm_write16(q->dev, B43_SHM_SHARED,
+		b43_shm_write16(dev, B43_SHM_SHARED,
 				B43_SHM_SH_MCASTCOOKIE, cookie);
 	}
 
 	pack->skb = skb;
 	if (q->rev >= 8)
-		pio_tx_frame_4byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+		pio_tx_frame_4byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
 	else
-		pio_tx_frame_2byte_queue(pack, (const u8 *)&txhdr, hdrlen);
+		pio_tx_frame_2byte_queue(pack, (const u8 *)&wl->txhdr, hdrlen);
 
 	/* Remove it from the list of available packet slots.
 	 * It will be put back when we receive the status report. */
@@ -614,14 +618,14 @@ void b43_pio_get_tx_stats(struct b43_wldev *dev,
 static bool pio_rx_frame(struct b43_pio_rxqueue *q)
 {
 	struct b43_wldev *dev = q->dev;
-	struct b43_rxhdr_fw4 rxhdr;
+	struct b43_wl *wl = dev->wl;
 	u16 len;
 	u32 macstat;
 	unsigned int i, padding;
 	struct sk_buff *skb;
 	const char *err_msg = NULL;
 
-	memset(&rxhdr, 0, sizeof(rxhdr));
+	memset(&wl->rxhdr, 0, sizeof(wl->rxhdr));
 
 	/* Check if we have data and wait for it to get ready. */
 	if (q->rev >= 8) {
@@ -659,16 +663,16 @@ data_ready:
 
 	/* Get the preamble (RX header) */
 	if (q->rev >= 8) {
-		ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 	} else {
-		ssb_block_read(dev->dev, &rxhdr, sizeof(rxhdr),
+		ssb_block_read(dev->dev, &wl->rxhdr, sizeof(wl->rxhdr),
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 	}
 	/* Sanity checks. */
-	len = le16_to_cpu(rxhdr.frame_len);
+	len = le16_to_cpu(wl->rxhdr.frame_len);
 	if (unlikely(len > 0x700)) {
 		err_msg = "len > 0x700";
 		goto rx_error;
@@ -678,7 +682,7 @@ data_ready:
 		goto rx_error;
 	}
 
-	macstat = le32_to_cpu(rxhdr.mac_status);
+	macstat = le32_to_cpu(wl->rxhdr.mac_status);
 	if (macstat & B43_RX_MAC_FCSERR) {
 		if (!(q->dev->wl->filter_flags & FIF_FCSFAIL)) {
 			/* Drop frames with failed FCS. */
@@ -703,24 +707,22 @@ data_ready:
 			       q->mmio_base + B43_PIO8_RXDATA,
 			       sizeof(u32));
 		if (len & 3) {
-			u8 tail[4] = { 0, };
-
 			/* Read the last few bytes. */
-			ssb_block_read(dev->dev, tail, 4,
+			ssb_block_read(dev->dev, wl->rx_tail, 4,
 				       q->mmio_base + B43_PIO8_RXDATA,
 				       sizeof(u32));
 			switch (len & 3) {
 			case 3:
-				skb->data[len + padding - 3] = tail[0];
-				skb->data[len + padding - 2] = tail[1];
-				skb->data[len + padding - 1] = tail[2];
+				skb->data[len + padding - 3] = wl->rx_tail[0];
+				skb->data[len + padding - 2] = wl->rx_tail[1];
+				skb->data[len + padding - 1] = wl->rx_tail[2];
 				break;
 			case 2:
-				skb->data[len + padding - 2] = tail[0];
-				skb->data[len + padding - 1] = tail[1];
+				skb->data[len + padding - 2] = wl->rx_tail[0];
+				skb->data[len + padding - 1] = wl->rx_tail[1];
 				break;
 			case 1:
-				skb->data[len + padding - 1] = tail[0];
+				skb->data[len + padding - 1] = wl->rx_tail[0];
 				break;
 			}
 		}
@@ -729,17 +731,15 @@ data_ready:
 			       q->mmio_base + B43_PIO_RXDATA,
 			       sizeof(u16));
 		if (len & 1) {
-			u8 tail[2] = { 0, };
-
 			/* Read the last byte. */
-			ssb_block_read(dev->dev, tail, 2,
+			ssb_block_read(dev->dev, wl->rx_tail, 2,
 				       q->mmio_base + B43_PIO_RXDATA,
 				       sizeof(u16));
-			skb->data[len + padding - 1] = tail[0];
+			skb->data[len + padding - 1] = wl->rx_tail[0];
 		}
 	}
 
-	b43_rx(q->dev, skb, &rxhdr);
+	b43_rx(q->dev, skb, &wl->rxhdr);
 
 	return 1;
 
diff --git a/drivers/net/wireless/b43/xmit.c b/drivers/net/wireless/b43/xmit.c
index ac9f600..892573b 100644
--- a/drivers/net/wireless/b43/xmit.c
+++ b/drivers/net/wireless/b43/xmit.c
@@ -27,7 +27,7 @@
 
 */
 
-#include "xmit.h"
+#include "b43.h"
 #include "phy_common.h"
 #include "dma.h"
 #include "pio.h"
-- 
cgit v0.10.2


From d308e38fa5467fbb523fc13e4b984375c2198c3d Mon Sep 17 00:00:00 2001
From: Wolfram Sang <w.sang@pengutronix.de>
Date: Wed, 7 Oct 2009 13:53:11 -0700
Subject: include/linux/netdevice.h: fix nanodoc mismatch

nanodoc was missing an ndo_-prefix.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 94958c1..812a5f3 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -557,7 +557,7 @@ struct netdev_queue {
  *	Callback uses when the transmitter has not made any progress
  *	for dev->watchdog ticks.
  *
- * struct net_device_stats* (*get_stats)(struct net_device *dev);
+ * struct net_device_stats* (*ndo_get_stats)(struct net_device *dev);
  *	Called when a user wants to get the network device usage
  *	statistics. If not defined, the counters in dev->stats will
  *	be used.
-- 
cgit v0.10.2


From 879e9304134bb6214fb52377ac1e01e1910f4916 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Wed, 7 Oct 2009 22:15:23 -0700
Subject: znet: Don't claim DMA lock around free_dma() calls.

It's not necessary and it's illegal too.

Reported-by: Alexander Strakh <strakh@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/znet.c b/drivers/net/znet.c
index a0384b6..b423473 100644
--- a/drivers/net/znet.c
+++ b/drivers/net/znet.c
@@ -169,7 +169,6 @@ static void znet_tx_timeout (struct net_device *dev);
 static int znet_request_resources (struct net_device *dev)
 {
 	struct znet_private *znet = netdev_priv(dev);
-	unsigned long flags;
 
 	if (request_irq (dev->irq, &znet_interrupt, 0, "ZNet", dev))
 		goto failed;
@@ -187,13 +186,9 @@ static int znet_request_resources (struct net_device *dev)
  free_sia:
 	release_region (znet->sia_base, znet->sia_size);
  free_tx_dma:
-	flags = claim_dma_lock();
 	free_dma (znet->tx_dma);
-	release_dma_lock (flags);
  free_rx_dma:
-	flags = claim_dma_lock();
 	free_dma (znet->rx_dma);
-	release_dma_lock (flags);
  free_irq:
 	free_irq (dev->irq, dev);
  failed:
@@ -203,14 +198,11 @@ static int znet_request_resources (struct net_device *dev)
 static void znet_release_resources (struct net_device *dev)
 {
 	struct znet_private *znet = netdev_priv(dev);
-	unsigned long flags;
 
 	release_region (znet->sia_base, znet->sia_size);
 	release_region (dev->base_addr, znet->io_size);
-	flags = claim_dma_lock();
 	free_dma (znet->tx_dma);
 	free_dma (znet->rx_dma);
-	release_dma_lock (flags);
 	free_irq (dev->irq, dev);
 }
 
-- 
cgit v0.10.2


From ad61df918c44316940404891d5082c63e79c256a Mon Sep 17 00:00:00 2001
From: Jiri Pirko <jpirko@redhat.com>
Date: Thu, 8 Oct 2009 01:21:46 -0700
Subject: netlink: fix typo in initialization

Commit 9ef1d4c7c7aca1cd436612b6ca785b726ffb8ed8 ("[NETLINK]: Missing
initializations in dumped data") introduced a typo in
initialization. This patch fixes this.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 6a53694..7cf6c0f 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -350,7 +350,7 @@ static int tcf_fill_node(struct sk_buff *skb, struct tcf_proto *tp,
 	tcm = NLMSG_DATA(nlh);
 	tcm->tcm_family = AF_UNSPEC;
 	tcm->tcm__pad1 = 0;
-	tcm->tcm__pad1 = 0;
+	tcm->tcm__pad2 = 0;
 	tcm->tcm_ifindex = qdisc_dev(tp->q)->ifindex;
 	tcm->tcm_parent = tp->classid;
 	tcm->tcm_info = TC_H_MAKE(tp->prio, tp->protocol);
-- 
cgit v0.10.2


From 8a8e05e5d8f6155788761961fc9845328863c16d Mon Sep 17 00:00:00 2001
From: Johannes Berg <johannes@sipsolutions.net>
Date: Thu, 8 Oct 2009 21:02:02 +0200
Subject: cfg80211: fix netns error unwinding bug

The error unwinding code in set_netns has a bug
that will make it run into a BUG_ON if passed a
bad wiphy index, fix by not trying to unlock a
wiphy that doesn't exist.

Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index eddab09..ca3c92a 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -4029,7 +4029,7 @@ static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
 	rdev = cfg80211_get_dev_from_info(info);
 	if (IS_ERR(rdev)) {
 		err = PTR_ERR(rdev);
-		goto out;
+		goto out_rtnl;
 	}
 
 	net = get_net_ns_by_pid(pid);
@@ -4049,6 +4049,7 @@ static int nl80211_wiphy_netns(struct sk_buff *skb, struct genl_info *info)
 	put_net(net);
  out:
 	cfg80211_unlock_rdev(rdev);
+ out_rtnl:
 	rtnl_unlock();
 	return err;
 }
-- 
cgit v0.10.2


From 541ae28c2df91e805c6df924a8e8522c2602db47 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 8 Oct 2009 09:54:37 +0000
Subject: qlge: Fix RSS hashing values.

Fix RX queue table size and change from random to default hash values.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 3ec6e85..567b5d6 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -1168,7 +1168,7 @@ struct ricb {
 #define RSS_RI6 0x40
 #define RSS_RT6 0x80
 	__le16 mask;
-	__le32 hash_cq_id[256];
+	u8 hash_cq_id[1024];
 	__le32 ipv6_hash_key[10];
 	__le32 ipv4_hash_key[4];
 } __attribute((packed));
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 6168071..04fc711 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3077,6 +3077,12 @@ err_irq:
 
 static int ql_start_rss(struct ql_adapter *qdev)
 {
+	u8 init_hash_seed[] = {0x6d, 0x5a, 0x56, 0xda, 0x25, 0x5b, 0x0e, 0xc2,
+				0x41, 0x67, 0x25, 0x3d, 0x43, 0xa3, 0x8f,
+				0xb0, 0xd0, 0xca, 0x2b, 0xcb, 0xae, 0x7b,
+				0x30, 0xb4, 0x77, 0xcb, 0x2d, 0xa3, 0x80,
+				0x30, 0xf2, 0x0c, 0x6a, 0x42, 0xb7, 0x3b,
+				0xbe, 0xac, 0x01, 0xfa};
 	struct ricb *ricb = &qdev->ricb;
 	int status = 0;
 	int i;
@@ -3086,21 +3092,17 @@ static int ql_start_rss(struct ql_adapter *qdev)
 
 	ricb->base_cq = RSS_L4K;
 	ricb->flags =
-	    (RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RI4 | RSS_RI6 | RSS_RT4 |
-	     RSS_RT6);
-	ricb->mask = cpu_to_le16(qdev->rss_ring_count - 1);
+		(RSS_L6K | RSS_LI | RSS_LB | RSS_LM | RSS_RT4 | RSS_RT6);
+	ricb->mask = cpu_to_le16((u16)(0x3ff));
 
 	/*
 	 * Fill out the Indirection Table.
 	 */
-	for (i = 0; i < 256; i++)
-		hash_id[i] = i & (qdev->rss_ring_count - 1);
+	for (i = 0; i < 1024; i++)
+		hash_id[i] = (i & (qdev->rss_ring_count - 1));
 
-	/*
-	 * Random values for the IPv6 and IPv4 Hash Keys.
-	 */
-	get_random_bytes((void *)&ricb->ipv6_hash_key[0], 40);
-	get_random_bytes((void *)&ricb->ipv4_hash_key[0], 16);
+	memcpy((void *)&ricb->ipv6_hash_key[0], init_hash_seed, 40);
+	memcpy((void *)&ricb->ipv4_hash_key[0], init_hash_seed, 16);
 
 	QPRINTK(qdev, IFUP, DEBUG, "Initializing RSS.\n");
 
-- 
cgit v0.10.2


From a3b71939a9c7a942323bfc0c8f97d0fd2bf22f95 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 8 Oct 2009 09:54:38 +0000
Subject: qlge: Fix frame routing issue related to bonding.

Currently frames are routed based on their type and MAC address. This
patch adds the port number on which the frame arrived to the routing.
This prevents problems in the case where both interfaces have the same MAC address in
a routing configuration.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 04fc711..d66ad8d 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3241,6 +3241,13 @@ static int ql_adapter_initialize(struct ql_adapter *qdev)
 	ql_write32(qdev, SPLT_HDR, SPLT_HDR_EP |
 		min(SMALL_BUFFER_SIZE, MAX_SPLIT_SIZE));
 
+	/* Set RX packet routing to use port/pci function on which the
+	 * packet arrived on in addition to usual frame routing.
+	 * This is helpful on bonding where both interfaces can have
+	 * the same MAC address.
+	 */
+	ql_write32(qdev, RST_FO, RST_FO_RR_MASK | RST_FO_RR_RCV_FUNC_CQ);
+
 	/* Start up the rx queues. */
 	for (i = 0; i < qdev->rx_ring_count; i++) {
 		status = ql_start_rx_ring(qdev, &qdev->rx_ring[i]);
-- 
cgit v0.10.2


From e163d7f2775624fcd7d21a060e18171fe006106d Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 8 Oct 2009 09:54:39 +0000
Subject: qlge: Fix frame routing for multicast frames.

Broadcast/multicast should always be routed to the default (zeroeth) rx
ring.  Broadcast frames are already routed correctly.  This fixes
routing for multicast frames.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index d66ad8d..20c074c 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -546,14 +546,14 @@ static int ql_set_routing_reg(struct ql_adapter *qdev, u32 index, u32 mask,
 		}
 	case RT_IDX_MCAST:	/* Pass up All Multicast frames. */
 		{
-			value = RT_IDX_DST_CAM_Q |	/* dest */
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
 			    RT_IDX_TYPE_NICQ |	/* type */
 			    (RT_IDX_ALLMULTI_SLOT << RT_IDX_IDX_SHIFT);/* index */
 			break;
 		}
 	case RT_IDX_MCAST_MATCH:	/* Pass up matched Multicast frames. */
 		{
-			value = RT_IDX_DST_CAM_Q |	/* dest */
+			value = RT_IDX_DST_DFLT_Q |	/* dest */
 			    RT_IDX_TYPE_NICQ |	/* type */
 			    (RT_IDX_MCAST_MATCH_SLOT << RT_IDX_IDX_SHIFT);/* index */
 			break;
-- 
cgit v0.10.2


From 76b26694cc9eb8c7ea1004b0601a5953cfa57b89 Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 8 Oct 2009 09:54:40 +0000
Subject: qlge: Fix RX multicast filter settings.

The addresses were being added to the filter properly, but were not
being enabled.  This adds enable bit to filter write.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index 20c074c..e1203bf 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -320,6 +320,37 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 
 	switch (type) {
 	case MAC_ADDR_TYPE_MULTI_MAC:
+		{
+			u32 upper = (addr[0] << 8) | addr[1];
+			u32 lower = (addr[2] << 24) | (addr[3] << 16) |
+					(addr[4] << 8) | (addr[5]);
+
+			status =
+				ql_wait_reg_rdy(qdev,
+				MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+			if (status)
+				goto exit;
+			ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+				(index << MAC_ADDR_IDX_SHIFT) |
+				type | MAC_ADDR_E);
+			ql_write32(qdev, MAC_ADDR_DATA, lower);
+			status =
+				ql_wait_reg_rdy(qdev,
+				MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+			if (status)
+				goto exit;
+			ql_write32(qdev, MAC_ADDR_IDX, (offset++) |
+				(index << MAC_ADDR_IDX_SHIFT) |
+				type | MAC_ADDR_E);
+
+			ql_write32(qdev, MAC_ADDR_DATA, upper);
+			status =
+				ql_wait_reg_rdy(qdev,
+				MAC_ADDR_IDX, MAC_ADDR_MW, 0);
+			if (status)
+				goto exit;
+			break;
+		}
 	case MAC_ADDR_TYPE_CAM_MAC:
 		{
 			u32 cam_output;
@@ -365,16 +396,14 @@ static int ql_set_mac_addr_reg(struct ql_adapter *qdev, u8 *addr, u32 type,
 			   and possibly the function id.  Right now we hardcode
 			   the route field to NIC core.
 			 */
-			if (type == MAC_ADDR_TYPE_CAM_MAC) {
-				cam_output = (CAM_OUT_ROUTE_NIC |
-					      (qdev->
-					       func << CAM_OUT_FUNC_SHIFT) |
-						(0 << CAM_OUT_CQ_ID_SHIFT));
-				if (qdev->vlgrp)
-					cam_output |= CAM_OUT_RV;
-				/* route to NIC core */
-				ql_write32(qdev, MAC_ADDR_DATA, cam_output);
-			}
+			cam_output = (CAM_OUT_ROUTE_NIC |
+				      (qdev->
+				       func << CAM_OUT_FUNC_SHIFT) |
+					(0 << CAM_OUT_CQ_ID_SHIFT));
+			if (qdev->vlgrp)
+				cam_output |= CAM_OUT_RV;
+			/* route to NIC core */
+			ql_write32(qdev, MAC_ADDR_DATA, cam_output);
 			break;
 		}
 	case MAC_ADDR_TYPE_VLAN:
-- 
cgit v0.10.2


From 84087f4d482c5d554e1b26a557d424761213e5dc Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 8 Oct 2009 09:54:41 +0000
Subject: qlge: Fix chip reset process.

Add wait for NIC fifo and MGMNT fifo to empty before applying reset.
Otherwise broken frames can be processed by management processor and
cause it to hang.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge.h b/drivers/net/qlge/qlge.h
index 567b5d6..e7285f0 100644
--- a/drivers/net/qlge/qlge.h
+++ b/drivers/net/qlge/qlge.h
@@ -803,6 +803,12 @@ enum {
 	MB_CMD_SET_PORT_CFG = 0x00000122,
 	MB_CMD_GET_PORT_CFG = 0x00000123,
 	MB_CMD_GET_LINK_STS = 0x00000124,
+	MB_CMD_SET_MGMNT_TFK_CTL = 0x00000160, /* Set Mgmnt Traffic Control */
+	MB_SET_MPI_TFK_STOP = (1 << 0),
+	MB_SET_MPI_TFK_RESUME = (1 << 1),
+	MB_CMD_GET_MGMNT_TFK_CTL = 0x00000161, /* Get Mgmnt Traffic Control */
+	MB_GET_MPI_TFK_STOPPED = (1 << 0),
+	MB_GET_MPI_TFK_FIFO_EMPTY = (1 << 1),
 
 	/* Mailbox Command Status. */
 	MB_CMD_STS_GOOD = 0x00004000,	/* Success. */
@@ -1606,6 +1612,8 @@ int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
 int ql_mb_about_fw(struct ql_adapter *qdev);
 void ql_link_on(struct ql_adapter *qdev);
 void ql_link_off(struct ql_adapter *qdev);
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control);
+int ql_wait_fifo_empty(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP
diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index e1203bf..fe13006 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3349,6 +3349,13 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 
 	end_jiffies = jiffies +
 		max((unsigned long)1, usecs_to_jiffies(30));
+
+	/* Stop management traffic. */
+	ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_STOP);
+
+	/* Wait for the NIC and MGMNT FIFOs to empty. */
+	ql_wait_fifo_empty(qdev);
+
 	ql_write32(qdev, RST_FO, (RST_FO_FR << 16) | RST_FO_FR);
 
 	do {
@@ -3364,6 +3371,8 @@ static int ql_adapter_reset(struct ql_adapter *qdev)
 		status = -ETIMEDOUT;
 	}
 
+	/* Resume management traffic. */
+	ql_mb_set_mgmnt_traffic_ctl(qdev, MB_SET_MPI_TFK_RESUME);
 	return status;
 }
 
diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index c2e4307..8810f5b 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -768,6 +768,95 @@ static int ql_idc_wait(struct ql_adapter *qdev)
 	return status;
 }
 
+int ql_mb_set_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 control)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 2;
+
+	mbcp->mbox_in[0] = MB_CMD_SET_MGMNT_TFK_CTL;
+	mbcp->mbox_in[1] = control;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Command not supported by firmware.\n");
+		status = -EINVAL;
+	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+		/* This indicates that the firmware is
+		 * already in the state we are trying to
+		 * change it to.
+		 */
+		QPRINTK(qdev, DRV, ERR,
+			"Command parameters make no change.\n");
+	}
+	return status;
+}
+
+/* Returns a negative error code or the mailbox command status. */
+static int ql_mb_get_mgmnt_traffic_ctl(struct ql_adapter *qdev, u32 *control)
+{
+	struct mbox_params mbc;
+	struct mbox_params *mbcp = &mbc;
+	int status;
+
+	memset(mbcp, 0, sizeof(struct mbox_params));
+	*control = 0;
+
+	mbcp->in_count = 1;
+	mbcp->out_count = 1;
+
+	mbcp->mbox_in[0] = MB_CMD_GET_MGMNT_TFK_CTL;
+
+	status = ql_mailbox_command(qdev, mbcp);
+	if (status)
+		return status;
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_GOOD) {
+		*control = mbcp->mbox_in[1];
+		return status;
+	}
+
+	if (mbcp->mbox_out[0] == MB_CMD_STS_INVLD_CMD) {
+		QPRINTK(qdev, DRV, ERR,
+			"Command not supported by firmware.\n");
+		status = -EINVAL;
+	} else if (mbcp->mbox_out[0] == MB_CMD_STS_ERR) {
+		QPRINTK(qdev, DRV, ERR,
+			"Failed to get MPI traffic control.\n");
+		status = -EIO;
+	}
+	return status;
+}
+
+int ql_wait_fifo_empty(struct ql_adapter *qdev)
+{
+	int count = 5;
+	u32 mgmnt_fifo_empty;
+	u32 nic_fifo_empty;
+
+	do {
+		nic_fifo_empty = ql_read32(qdev, STS) & STS_NFE;
+		ql_mb_get_mgmnt_traffic_ctl(qdev, &mgmnt_fifo_empty);
+		mgmnt_fifo_empty &= MB_GET_MPI_TFK_FIFO_EMPTY;
+		if (nic_fifo_empty && mgmnt_fifo_empty)
+			return 0;
+		msleep(100);
+	} while (count-- > 0);
+	return -ETIMEDOUT;
+}
+
 /* API called in work thread context to set new TX/RX
  * maximum frame size values to match MTU.
  */
-- 
cgit v0.10.2


From 2cd6dbaaf43ca9ec5607239c23c4e9793b702e1b Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 8 Oct 2009 09:54:42 +0000
Subject: qlge: Restore rx mode after internal reset.

Call set_multi API after reset recovery.  This was exposed by tripping
tx_timeout.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge_main.c b/drivers/net/qlge/qlge_main.c
index fe13006..48b45df 100644
--- a/drivers/net/qlge/qlge_main.c
+++ b/drivers/net/qlge/qlge_main.c
@@ -3751,6 +3751,12 @@ static void ql_asic_reset_work(struct work_struct *work)
 	status = ql_adapter_up(qdev);
 	if (status)
 		goto error;
+
+	/* Restore rx mode. */
+	clear_bit(QL_ALLMULTI, &qdev->flags);
+	clear_bit(QL_PROMISCUOUS, &qdev->flags);
+	qlge_set_multicast_list(qdev->ndev);
+
 	rtnl_unlock();
 	return;
 error:
-- 
cgit v0.10.2


From efd7d2619f2e5da222ad34fef3e8f47730cd8f2c Mon Sep 17 00:00:00 2001
From: Ron Mercer <ron.mercer@qlogic.com>
Date: Thu, 8 Oct 2009 09:54:43 +0000
Subject: qlge: Add disable/enable firmare irqs to handler.

This was accidentally omitted from one of the previous patches for firmware event
handling.  The handler needs to the enable firmware irq mask when it's done
processing or it may not get any more events interrupts.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/qlge/qlge_mpi.c b/drivers/net/qlge/qlge_mpi.c
index 8810f5b..99e58e3 100644
--- a/drivers/net/qlge/qlge_mpi.c
+++ b/drivers/net/qlge/qlge_mpi.c
@@ -965,6 +965,8 @@ void ql_mpi_work(struct work_struct *work)
 	int err = 0;
 
 	rtnl_lock();
+	/* Begin polled mode for MPI */
+	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16));
 
 	while (ql_read32(qdev, STS) & STS_PI) {
 		memset(mbcp, 0, sizeof(struct mbox_params));
@@ -977,6 +979,8 @@ void ql_mpi_work(struct work_struct *work)
 			break;
 	}
 
+	/* End polled mode for MPI */
+	ql_write32(qdev, INTR_MASK, (INTR_MASK_PI << 16) | INTR_MASK_PI);
 	rtnl_unlock();
 	ql_enable_completion_interrupt(qdev, 0);
 }
-- 
cgit v0.10.2


From 3201fce0b2b12e4dc9e26dcf09bdb0652ff522db Mon Sep 17 00:00:00 2001
From: Dave Mitchell <dmitchell@appliedmicro.com>
Date: Thu, 8 Oct 2009 06:32:21 +0000
Subject: ibm_newemac: Added 16K Tx FIFO size support for EMAC4

Some of the EMAC V4 implementations support 16K Tx FIFOs. This
patch adds support for this functionality and fixes typos in the
Tx FIFO size error messages.

Signed-off-by: Dave Mitchell <dmitchell@appliedmicro.com>
Acked-by: Prodyut Hazarika <phazarika@appliedmicro.com>
Acked-by: Victor Gallardo <vgallardo@appliedmicro.com>
Acked-by: Loc Ho <lho@appliedmicro.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c
index 89c82c5..c6591cb 100644
--- a/drivers/net/ibm_newemac/core.c
+++ b/drivers/net/ibm_newemac/core.c
@@ -443,7 +443,7 @@ static u32 __emac_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_s
 		ret |= EMAC_MR1_TFS_2K;
 		break;
 	default:
-		printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
+		printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
 		       dev->ndev->name, tx_size);
 	}
 
@@ -470,6 +470,9 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_
 	DBG2(dev, "__emac4_calc_base_mr1" NL);
 
 	switch(tx_size) {
+	case 16384:
+		ret |= EMAC4_MR1_TFS_16K;
+		break;
 	case 4096:
 		ret |= EMAC4_MR1_TFS_4K;
 		break;
@@ -477,7 +480,7 @@ static u32 __emac4_calc_base_mr1(struct emac_instance *dev, int tx_size, int rx_
 		ret |= EMAC4_MR1_TFS_2K;
 		break;
 	default:
-		printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
+		printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
 		       dev->ndev->name, tx_size);
 	}
 
diff --git a/drivers/net/ibm_newemac/emac.h b/drivers/net/ibm_newemac/emac.h
index 0afc2cf..d34adf9 100644
--- a/drivers/net/ibm_newemac/emac.h
+++ b/drivers/net/ibm_newemac/emac.h
@@ -153,6 +153,7 @@ struct emac_regs {
 #define EMAC4_MR1_RFS_16K		0x00280000
 #define EMAC4_MR1_TFS_2K       		0x00020000
 #define EMAC4_MR1_TFS_4K		0x00030000
+#define EMAC4_MR1_TFS_16K		0x00050000
 #define EMAC4_MR1_TR			0x00008000
 #define EMAC4_MR1_MWSW_001		0x00001000
 #define EMAC4_MR1_JPSM			0x00000800
-- 
cgit v0.10.2


From 10c435f18b8cb78a5870c08d52955594f5ec9c31 Mon Sep 17 00:00:00 2001
From: "David S. Miller" <davem@davemloft.net>
Date: Fri, 9 Oct 2009 14:24:36 -0700
Subject: net: Link in PHY drivers before others.

We need PHY drivers to initialize in a static kernel before
the MAC drivers that use them.  So link them in first.

Based upon a report by Felix Radensky.

Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d866b8c..48d82e9 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -2,6 +2,10 @@
 # Makefile for the Linux network (ethercard) device drivers.
 #
 
+obj-$(CONFIG_MII) += mii.o
+obj-$(CONFIG_MDIO) += mdio.o
+obj-$(CONFIG_PHYLIB) += phy/
+
 obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
 
 obj-$(CONFIG_E1000) += e1000/
@@ -100,10 +104,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
 # end link order section
 #
 
-obj-$(CONFIG_MII) += mii.o
-obj-$(CONFIG_MDIO) += mdio.o
-obj-$(CONFIG_PHYLIB) += phy/
-
 obj-$(CONFIG_SUNDANCE) += sundance.o
 obj-$(CONFIG_HAMACHI) += hamachi.o
 obj-$(CONFIG_NET) += Space.o loopback.o
-- 
cgit v0.10.2